From 2ba890ec0849b222a6dabb5192ccd8fd1696d6d3 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 17 Apr 2008 21:42:58 -0300 Subject: V4L/DVB (7611): em28xx: Move registers to a separate file em28xx.h contains lots of different stuff inside. The better is to break it on some files. This patch removes the register names, moving them to a separate file. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-cards.c | 2 +- drivers/media/video/em28xx/em28xx-reg.h | 88 +++++++++++++++++++++++++++++++ drivers/media/video/em28xx/em28xx.h | 66 +---------------------- 3 files changed, 90 insertions(+), 66 deletions(-) create mode 100644 drivers/media/video/em28xx/em28xx-reg.h diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index 0c71e599c14..0cf61a50220 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -531,7 +531,7 @@ void em28xx_pre_card_setup(struct em28xx *dev) rc = em28xx_read_reg(dev, CHIPID_REG); if (rc > 0) { switch (rc) { - case 36: + case CHIP_ID_EM2883: em28xx_info("chip ID is em2882/em2883\n"); dev->wait_after_write = 0; break; diff --git a/drivers/media/video/em28xx/em28xx-reg.h b/drivers/media/video/em28xx/em28xx-reg.h new file mode 100644 index 00000000000..02eb2b171ba --- /dev/null +++ b/drivers/media/video/em28xx/em28xx-reg.h @@ -0,0 +1,88 @@ +#define EM_GPIO_0 (1 << 0) +#define EM_GPIO_1 (1 << 1) +#define EM_GPIO_2 (1 << 2) +#define EM_GPIO_3 (1 << 3) +#define EM_GPIO_4 (1 << 4) +#define EM_GPIO_5 (1 << 5) +#define EM_GPIO_6 (1 << 6) +#define EM_GPIO_7 (1 << 7) + +#define EM_GPO_0 (1 << 0) +#define EM_GPO_1 (1 << 1) +#define EM_GPO_2 (1 << 2) +#define EM_GPO_3 (1 << 3) + +/* em2800 registers */ +#define EM2800_AUDIOSRC_REG 0x08 + +/* em28xx registers */ + + /* GPIO/GPO registers */ +#define EM_R04_GPO 0x04 /* em2880-em2883 only */ +#define EM_R08_GPIO 0x08 /* em2820 or upper */ + +#define I2C_CLK_REG 0x06 +#define CHIPID_REG 0x0a +#define USBSUSP_REG 0x0c /* */ + +#define AUDIOSRC_REG 0x0e +#define XCLK_REG 0x0f + +#define VINMODE_REG 0x10 +#define VINCTRL_REG 0x11 +#define VINENABLE_REG 0x12 /* */ + +#define GAMMA_REG 0x14 +#define RGAIN_REG 0x15 +#define GGAIN_REG 0x16 +#define BGAIN_REG 0x17 +#define ROFFSET_REG 0x18 +#define GOFFSET_REG 0x19 +#define BOFFSET_REG 0x1a + +#define OFLOW_REG 0x1b +#define HSTART_REG 0x1c +#define VSTART_REG 0x1d +#define CWIDTH_REG 0x1e +#define CHEIGHT_REG 0x1f + +#define YGAIN_REG 0x20 +#define YOFFSET_REG 0x21 +#define UVGAIN_REG 0x22 +#define UOFFSET_REG 0x23 +#define VOFFSET_REG 0x24 +#define SHARPNESS_REG 0x25 + +#define COMPR_REG 0x26 +#define OUTFMT_REG 0x27 + +#define XMIN_REG 0x28 +#define XMAX_REG 0x29 +#define YMIN_REG 0x2a +#define YMAX_REG 0x2b + +#define HSCALELOW_REG 0x30 +#define HSCALEHIGH_REG 0x31 +#define VSCALELOW_REG 0x32 +#define VSCALEHIGH_REG 0x33 + +#define AC97LSB_REG 0x40 +#define AC97MSB_REG 0x41 +#define AC97ADDR_REG 0x42 +#define AC97BUSY_REG 0x43 + +/* em202 registers */ +#define MASTER_AC97 0x02 +#define LINE_IN_AC97 0x10 +#define VIDEO_AC97 0x14 + +/* register settings */ +#define EM2800_AUDIO_SRC_TUNER 0x0d +#define EM2800_AUDIO_SRC_LINE 0x0c +#define EM28XX_AUDIO_SRC_TUNER 0xc0 +#define EM28XX_AUDIO_SRC_LINE 0x80 + +/* FIXME: Need to be populated with the other chip ID's */ +enum em28xx_chip_id { + CHIP_ID_EM2883 = 36, +}; diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h index 8f12b848b1d..2188bc44c46 100644 --- a/drivers/media/video/em28xx/em28xx.h +++ b/drivers/media/video/em28xx/em28xx.h @@ -35,6 +35,7 @@ #include #endif #include "tuner-xc2028.h" +#include "em28xx-reg.h" /* Boards supported by driver */ #define EM2800_BOARD_UNKNOWN 0 @@ -480,71 +481,6 @@ int em28xx_get_key_em_haup(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw); int em28xx_get_key_pinnacle_usb_grey(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw); -/* em2800 registers */ -#define EM2800_AUDIOSRC_REG 0x08 - -/* em28xx registers */ -#define I2C_CLK_REG 0x06 -#define CHIPID_REG 0x0a -#define USBSUSP_REG 0x0c /* */ - -#define AUDIOSRC_REG 0x0e -#define XCLK_REG 0x0f - -#define VINMODE_REG 0x10 -#define VINCTRL_REG 0x11 -#define VINENABLE_REG 0x12 /* */ - -#define GAMMA_REG 0x14 -#define RGAIN_REG 0x15 -#define GGAIN_REG 0x16 -#define BGAIN_REG 0x17 -#define ROFFSET_REG 0x18 -#define GOFFSET_REG 0x19 -#define BOFFSET_REG 0x1a - -#define OFLOW_REG 0x1b -#define HSTART_REG 0x1c -#define VSTART_REG 0x1d -#define CWIDTH_REG 0x1e -#define CHEIGHT_REG 0x1f - -#define YGAIN_REG 0x20 -#define YOFFSET_REG 0x21 -#define UVGAIN_REG 0x22 -#define UOFFSET_REG 0x23 -#define VOFFSET_REG 0x24 -#define SHARPNESS_REG 0x25 - -#define COMPR_REG 0x26 -#define OUTFMT_REG 0x27 - -#define XMIN_REG 0x28 -#define XMAX_REG 0x29 -#define YMIN_REG 0x2a -#define YMAX_REG 0x2b - -#define HSCALELOW_REG 0x30 -#define HSCALEHIGH_REG 0x31 -#define VSCALELOW_REG 0x32 -#define VSCALEHIGH_REG 0x33 - -#define AC97LSB_REG 0x40 -#define AC97MSB_REG 0x41 -#define AC97ADDR_REG 0x42 -#define AC97BUSY_REG 0x43 - -/* em202 registers */ -#define MASTER_AC97 0x02 -#define LINE_IN_AC97 0x10 -#define VIDEO_AC97 0x14 - -/* register settings */ -#define EM2800_AUDIO_SRC_TUNER 0x0d -#define EM2800_AUDIO_SRC_LINE 0x0c -#define EM28XX_AUDIO_SRC_TUNER 0xc0 -#define EM28XX_AUDIO_SRC_LINE 0x80 - /* printk macros */ #define em28xx_err(fmt, arg...) do {\ -- cgit v1.2.3