From 50a4da890102a455e5cd3dd358c38650d07178d3 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Wed, 8 Apr 2009 15:39:38 +0000 Subject: ACPI: button: whitespace changes This patch changes a bit of whitespace to follow Linux conventions. Signed-off-by: Bjorn Helgaas Signed-off-by: Len Brown --- drivers/acpi/button.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c index d73c94b8441..52eb06ea4f8 100644 --- a/drivers/acpi/button.c +++ b/drivers/acpi/button.c @@ -1,5 +1,5 @@ /* - * acpi_button.c - ACPI Button Driver ($Revision: 30 $) + * button.c - ACPI Button Driver * * Copyright (C) 2001, 2002 Andy Grover * Copyright (C) 2001, 2002 Paul Diefenbaugh @@ -133,7 +133,6 @@ static int acpi_button_info_seq_show(struct seq_file *seq, void *offset) seq_printf(seq, "type: %s\n", acpi_device_name(button->device)); - return 0; } @@ -259,6 +258,7 @@ static int acpi_lid_send_state(struct acpi_button *button) &state); if (ACPI_FAILURE(status)) return -ENODEV; + /* input layer checks if event is redundant */ input_report_switch(button->input, SW_LID, !state); input_sync(button->input); @@ -299,13 +299,12 @@ static void acpi_button_notify(struct acpi_device *device, u32 event) "Unsupported event [0x%x]\n", event)); break; } - - return; } static int acpi_button_resume(struct acpi_device *device) { struct acpi_button *button; + if (!device) return -EINVAL; button = acpi_driver_data(device); @@ -424,7 +423,6 @@ static int acpi_button_add(struct acpi_device *device) printk(KERN_INFO PREFIX "%s [%s]\n", acpi_device_name(device), acpi_device_bid(device)); - return 0; err_remove_fs: @@ -448,7 +446,6 @@ static int acpi_button_remove(struct acpi_device *device, int type) acpi_button_remove_fs(device); input_unregister_device(button->input); kfree(button); - return 0; } @@ -459,6 +456,7 @@ static int __init acpi_button_init(void) acpi_button_dir = proc_mkdir(ACPI_BUTTON_CLASS, acpi_root_dir); if (!acpi_button_dir) return -ENODEV; + result = acpi_bus_register_driver(&acpi_button_driver); if (result < 0) { remove_proc_entry(ACPI_BUTTON_CLASS, acpi_root_dir); -- cgit v1.2.3 From e2fb9754d27513918a4936e8cbaad50ff56cfd3d Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Wed, 8 Apr 2009 15:39:43 +0000 Subject: ACPI: button: remove unnecessary null pointer checks Better to oops and learn about a bug than to silently cover it up. Signed-off-by: Bjorn Helgaas Signed-off-by: Len Brown --- drivers/acpi/button.c | 22 +--------------------- 1 file changed, 1 insertion(+), 21 deletions(-) diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c index 52eb06ea4f8..c4632366226 100644 --- a/drivers/acpi/button.c +++ b/drivers/acpi/button.c @@ -128,9 +128,6 @@ static int acpi_button_info_seq_show(struct seq_file *seq, void *offset) { struct acpi_button *button = seq->private; - if (!button || !button->device) - return 0; - seq_printf(seq, "type: %s\n", acpi_device_name(button->device)); return 0; @@ -147,9 +144,6 @@ static int acpi_button_state_seq_show(struct seq_file *seq, void *offset) acpi_status status; unsigned long long state; - if (!button || !button->device) - return 0; - status = acpi_evaluate_integer(button->device->handle, "_LID", NULL, &state); seq_printf(seq, "state: %s\n", ACPI_FAILURE(status) ? "unsupported" : @@ -171,9 +165,6 @@ static int acpi_button_add_fs(struct acpi_device *device) struct proc_dir_entry *entry = NULL; struct acpi_button *button; - if (!device || !acpi_driver_data(device)) - return -EINVAL; - button = acpi_driver_data(device); switch (button->type) { @@ -270,9 +261,6 @@ static void acpi_button_notify(struct acpi_device *device, u32 event) struct acpi_button *button = acpi_driver_data(device); struct input_dev *input; - if (!button || !button->device) - return; - switch (event) { case ACPI_FIXED_HARDWARE_EVENT: event = ACPI_BUTTON_NOTIFY_STATUS; @@ -305,10 +293,8 @@ static int acpi_button_resume(struct acpi_device *device) { struct acpi_button *button; - if (!device) - return -EINVAL; button = acpi_driver_data(device); - if (button && button->type == ACPI_BUTTON_TYPE_LID) + if (button->type == ACPI_BUTTON_TYPE_LID) return acpi_lid_send_state(button); return 0; } @@ -319,9 +305,6 @@ static int acpi_button_add(struct acpi_device *device) struct acpi_button *button; struct input_dev *input; - if (!device) - return -EINVAL; - button = kzalloc(sizeof(struct acpi_button), GFP_KERNEL); if (!button) return -ENOMEM; @@ -438,9 +421,6 @@ static int acpi_button_remove(struct acpi_device *device, int type) { struct acpi_button *button; - if (!device || !acpi_driver_data(device)) - return -EINVAL; - button = acpi_driver_data(device); acpi_button_remove_fs(device); -- cgit v1.2.3 From 1bce81131c71064bc3163078f24545b839a31967 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Wed, 8 Apr 2009 15:39:49 +0000 Subject: ACPI: button: use Linux style for getting driver_data It's typical and slightly more compact to look up the driver_data structure by initializing the automatic variable at its definition. Signed-off-by: Bjorn Helgaas Signed-off-by: Len Brown --- drivers/acpi/button.c | 13 ++++--------- 1 file changed, 4 insertions(+), 9 deletions(-) diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c index c4632366226..8ef8f443f53 100644 --- a/drivers/acpi/button.c +++ b/drivers/acpi/button.c @@ -162,10 +162,8 @@ static struct proc_dir_entry *acpi_lid_dir; static int acpi_button_add_fs(struct acpi_device *device) { + struct acpi_button *button = acpi_driver_data(device); struct proc_dir_entry *entry = NULL; - struct acpi_button *button; - - button = acpi_driver_data(device); switch (button->type) { case ACPI_BUTTON_TYPE_POWER: @@ -291,9 +289,8 @@ static void acpi_button_notify(struct acpi_device *device, u32 event) static int acpi_button_resume(struct acpi_device *device) { - struct acpi_button *button; + struct acpi_button *button = acpi_driver_data(device); - button = acpi_driver_data(device); if (button->type == ACPI_BUTTON_TYPE_LID) return acpi_lid_send_state(button); return 0; @@ -301,9 +298,9 @@ static int acpi_button_resume(struct acpi_device *device) static int acpi_button_add(struct acpi_device *device) { - int error; struct acpi_button *button; struct input_dev *input; + int error; button = kzalloc(sizeof(struct acpi_button), GFP_KERNEL); if (!button) @@ -419,9 +416,7 @@ static int acpi_button_add(struct acpi_device *device) static int acpi_button_remove(struct acpi_device *device, int type) { - struct acpi_button *button; - - button = acpi_driver_data(device); + struct acpi_button *button = acpi_driver_data(device); acpi_button_remove_fs(device); input_unregister_device(button->input); -- cgit v1.2.3 From bf04a77227db76f163bc2355ef4e176794987be2 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Wed, 8 Apr 2009 15:39:54 +0000 Subject: ACPI: button: cache hid/name/class pointers This patch adds temporaries to cache the acpi_device_hid(), acpi_device_name(), and acpi_device_class() pointers so we don't have to clutter the code with so many uses of those interfaces. Signed-off-by: Bjorn Helgaas Signed-off-by: Len Brown --- drivers/acpi/button.c | 48 ++++++++++++++++++++++++------------------------ 1 file changed, 24 insertions(+), 24 deletions(-) diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c index 8ef8f443f53..9f6d2e6844a 100644 --- a/drivers/acpi/button.c +++ b/drivers/acpi/button.c @@ -300,6 +300,7 @@ static int acpi_button_add(struct acpi_device *device) { struct acpi_button *button; struct input_dev *input; + char *hid, *name, *class; int error; button = kzalloc(sizeof(struct acpi_button), GFP_KERNEL); @@ -315,40 +316,41 @@ static int acpi_button_add(struct acpi_device *device) goto err_free_button; } + hid = acpi_device_hid(device); + name = acpi_device_name(device); + class = acpi_device_class(device); + /* * Determine the button type (via hid), as fixed-feature buttons * need to be handled a bit differently than generic-space. */ - if (!strcmp(acpi_device_hid(device), ACPI_BUTTON_HID_POWER)) { + if (!strcmp(hid, ACPI_BUTTON_HID_POWER)) { button->type = ACPI_BUTTON_TYPE_POWER; - strcpy(acpi_device_name(device), ACPI_BUTTON_DEVICE_NAME_POWER); - sprintf(acpi_device_class(device), "%s/%s", + strcpy(name, ACPI_BUTTON_DEVICE_NAME_POWER); + sprintf(class, "%s/%s", ACPI_BUTTON_CLASS, ACPI_BUTTON_SUBCLASS_POWER); - } else if (!strcmp(acpi_device_hid(device), ACPI_BUTTON_HID_POWERF)) { + } else if (!strcmp(hid, ACPI_BUTTON_HID_POWERF)) { button->type = ACPI_BUTTON_TYPE_POWERF; - strcpy(acpi_device_name(device), - ACPI_BUTTON_DEVICE_NAME_POWERF); - sprintf(acpi_device_class(device), "%s/%s", + strcpy(name, ACPI_BUTTON_DEVICE_NAME_POWERF); + sprintf(class, "%s/%s", ACPI_BUTTON_CLASS, ACPI_BUTTON_SUBCLASS_POWER); - } else if (!strcmp(acpi_device_hid(device), ACPI_BUTTON_HID_SLEEP)) { + } else if (!strcmp(hid, ACPI_BUTTON_HID_SLEEP)) { button->type = ACPI_BUTTON_TYPE_SLEEP; - strcpy(acpi_device_name(device), ACPI_BUTTON_DEVICE_NAME_SLEEP); - sprintf(acpi_device_class(device), "%s/%s", + strcpy(name, ACPI_BUTTON_DEVICE_NAME_SLEEP); + sprintf(class, "%s/%s", ACPI_BUTTON_CLASS, ACPI_BUTTON_SUBCLASS_SLEEP); - } else if (!strcmp(acpi_device_hid(device), ACPI_BUTTON_HID_SLEEPF)) { + } else if (!strcmp(hid, ACPI_BUTTON_HID_SLEEPF)) { button->type = ACPI_BUTTON_TYPE_SLEEPF; - strcpy(acpi_device_name(device), - ACPI_BUTTON_DEVICE_NAME_SLEEPF); - sprintf(acpi_device_class(device), "%s/%s", + strcpy(name, ACPI_BUTTON_DEVICE_NAME_SLEEPF); + sprintf(class, "%s/%s", ACPI_BUTTON_CLASS, ACPI_BUTTON_SUBCLASS_SLEEP); - } else if (!strcmp(acpi_device_hid(device), ACPI_BUTTON_HID_LID)) { + } else if (!strcmp(hid, ACPI_BUTTON_HID_LID)) { button->type = ACPI_BUTTON_TYPE_LID; - strcpy(acpi_device_name(device), ACPI_BUTTON_DEVICE_NAME_LID); - sprintf(acpi_device_class(device), "%s/%s", + strcpy(name, ACPI_BUTTON_DEVICE_NAME_LID); + sprintf(class, "%s/%s", ACPI_BUTTON_CLASS, ACPI_BUTTON_SUBCLASS_LID); } else { - printk(KERN_ERR PREFIX "Unsupported hid [%s]\n", - acpi_device_hid(device)); + printk(KERN_ERR PREFIX "Unsupported hid [%s]\n", hid); error = -ENODEV; goto err_free_input; } @@ -357,10 +359,9 @@ static int acpi_button_add(struct acpi_device *device) if (error) goto err_free_input; - snprintf(button->phys, sizeof(button->phys), - "%s/button/input0", acpi_device_hid(device)); + snprintf(button->phys, sizeof(button->phys), "%s/button/input0", hid); - input->name = acpi_device_name(device); + input->name = name; input->phys = button->phys; input->id.bustype = BUS_HOST; input->id.product = button->type; @@ -401,8 +402,7 @@ static int acpi_button_add(struct acpi_device *device) device->wakeup.state.enabled = 1; } - printk(KERN_INFO PREFIX "%s [%s]\n", - acpi_device_name(device), acpi_device_bid(device)); + printk(KERN_INFO PREFIX "%s [%s]\n", name, acpi_device_bid(device)); return 0; err_remove_fs: -- cgit v1.2.3 From 106c19e7b978e1b84ea5cabbd470a0ddced577c8 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Wed, 8 Apr 2009 15:39:59 +0000 Subject: ACPI: button: remove button->device pointer We no longer need a pointer from struct acpi_button back to the struct acpi_device. Everywhere we used that pointer, we either already have, or can easily get, the acpi_device pointer without using the copy from acpi_button. So this patch removes the structure element. Signed-off-by: Bjorn Helgaas Signed-off-by: Len Brown --- drivers/acpi/button.c | 31 +++++++++++++------------------ 1 file changed, 13 insertions(+), 18 deletions(-) diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c index 9f6d2e6844a..c8441627f68 100644 --- a/drivers/acpi/button.c +++ b/drivers/acpi/button.c @@ -95,7 +95,6 @@ static struct acpi_driver acpi_button_driver = { }; struct acpi_button { - struct acpi_device *device; /* Fixed button kludge */ unsigned int type; struct input_dev *input; char phys[32]; /* for input device */ @@ -126,10 +125,10 @@ static struct proc_dir_entry *acpi_button_dir; static int acpi_button_info_seq_show(struct seq_file *seq, void *offset) { - struct acpi_button *button = seq->private; + struct acpi_device *device = seq->private; seq_printf(seq, "type: %s\n", - acpi_device_name(button->device)); + acpi_device_name(device)); return 0; } @@ -140,11 +139,11 @@ static int acpi_button_info_open_fs(struct inode *inode, struct file *file) static int acpi_button_state_seq_show(struct seq_file *seq, void *offset) { - struct acpi_button *button = seq->private; + struct acpi_device *device = seq->private; acpi_status status; unsigned long long state; - status = acpi_evaluate_integer(button->device->handle, "_LID", NULL, &state); + status = acpi_evaluate_integer(device->handle, "_LID", NULL, &state); seq_printf(seq, "state: %s\n", ACPI_FAILURE(status) ? "unsupported" : (state ? "open" : "closed")); @@ -198,8 +197,7 @@ static int acpi_button_add_fs(struct acpi_device *device) /* 'info' [R] */ entry = proc_create_data(ACPI_BUTTON_FILE_INFO, S_IRUGO, acpi_device_dir(device), - &acpi_button_info_fops, - acpi_driver_data(device)); + &acpi_button_info_fops, device); if (!entry) return -ENODEV; @@ -207,8 +205,7 @@ static int acpi_button_add_fs(struct acpi_device *device) if (button->type == ACPI_BUTTON_TYPE_LID) { entry = proc_create_data(ACPI_BUTTON_FILE_STATE, S_IRUGO, acpi_device_dir(device), - &acpi_button_state_fops, - acpi_driver_data(device)); + &acpi_button_state_fops, device); if (!entry) return -ENODEV; } @@ -238,13 +235,13 @@ static int acpi_button_remove_fs(struct acpi_device *device) /* -------------------------------------------------------------------------- Driver Interface -------------------------------------------------------------------------- */ -static int acpi_lid_send_state(struct acpi_button *button) +static int acpi_lid_send_state(struct acpi_device *device) { + struct acpi_button *button = acpi_driver_data(device); unsigned long long state; acpi_status status; - status = acpi_evaluate_integer(button->device->handle, "_LID", NULL, - &state); + status = acpi_evaluate_integer(device->handle, "_LID", NULL, &state); if (ACPI_FAILURE(status)) return -ENODEV; @@ -266,7 +263,7 @@ static void acpi_button_notify(struct acpi_device *device, u32 event) case ACPI_BUTTON_NOTIFY_STATUS: input = button->input; if (button->type == ACPI_BUTTON_TYPE_LID) { - acpi_lid_send_state(button); + acpi_lid_send_state(device); } else { int keycode = test_bit(KEY_SLEEP, input->keybit) ? KEY_SLEEP : KEY_POWER; @@ -277,8 +274,7 @@ static void acpi_button_notify(struct acpi_device *device, u32 event) input_sync(input); } - acpi_bus_generate_proc_event(button->device, event, - ++button->pushed); + acpi_bus_generate_proc_event(device, event, ++button->pushed); break; default: ACPI_DEBUG_PRINT((ACPI_DB_INFO, @@ -292,7 +288,7 @@ static int acpi_button_resume(struct acpi_device *device) struct acpi_button *button = acpi_driver_data(device); if (button->type == ACPI_BUTTON_TYPE_LID) - return acpi_lid_send_state(button); + return acpi_lid_send_state(device); return 0; } @@ -307,7 +303,6 @@ static int acpi_button_add(struct acpi_device *device) if (!button) return -ENOMEM; - button->device = device; device->driver_data = button; button->input = input = input_allocate_device(); @@ -390,7 +385,7 @@ static int acpi_button_add(struct acpi_device *device) if (error) goto err_remove_fs; if (button->type == ACPI_BUTTON_TYPE_LID) - acpi_lid_send_state(button); + acpi_lid_send_state(device); if (device->wakeup.flags.valid) { /* Button's GPE is run-wake GPE */ -- cgit v1.2.3 From d68b597c883cf863c7216564cae08a4730d56cc1 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Wed, 8 Apr 2009 15:40:04 +0000 Subject: ACPI: button: remove control method/fixed hardware distinctions This patch removes the driver distinction between control method (CM) and fixed hardware (FF) buttons. We previously needed that so we could install either a fixed event handler or a notify handler, but the Linux/ACPI code now handles that for us, so we don't need to worry about it. Note that this removes the FF/CM annotation from the "info" files in /proc. For example, /proc/acpi/button/PWRF/info: -type: Power Button (FF) +type: Power Button I don't think there's anything meaningful user-space can do by knowing whether a button is a control method or a fixed hardware button, so nobody should be looking at the FF/CM. Signed-off-by: Bjorn Helgaas Signed-off-by: Len Brown --- drivers/acpi/button.c | 32 ++++++-------------------------- 1 file changed, 6 insertions(+), 26 deletions(-) diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c index c8441627f68..9195deba9d9 100644 --- a/drivers/acpi/button.c +++ b/drivers/acpi/button.c @@ -41,17 +41,13 @@ #define ACPI_BUTTON_SUBCLASS_POWER "power" #define ACPI_BUTTON_HID_POWER "PNP0C0C" -#define ACPI_BUTTON_DEVICE_NAME_POWER "Power Button (CM)" -#define ACPI_BUTTON_DEVICE_NAME_POWERF "Power Button (FF)" +#define ACPI_BUTTON_DEVICE_NAME_POWER "Power Button" #define ACPI_BUTTON_TYPE_POWER 0x01 -#define ACPI_BUTTON_TYPE_POWERF 0x02 #define ACPI_BUTTON_SUBCLASS_SLEEP "sleep" #define ACPI_BUTTON_HID_SLEEP "PNP0C0E" -#define ACPI_BUTTON_DEVICE_NAME_SLEEP "Sleep Button (CM)" -#define ACPI_BUTTON_DEVICE_NAME_SLEEPF "Sleep Button (FF)" +#define ACPI_BUTTON_DEVICE_NAME_SLEEP "Sleep Button" #define ACPI_BUTTON_TYPE_SLEEP 0x03 -#define ACPI_BUTTON_TYPE_SLEEPF 0x04 #define ACPI_BUTTON_SUBCLASS_LID "lid" #define ACPI_BUTTON_HID_LID "PNP0C0D" @@ -166,14 +162,12 @@ static int acpi_button_add_fs(struct acpi_device *device) switch (button->type) { case ACPI_BUTTON_TYPE_POWER: - case ACPI_BUTTON_TYPE_POWERF: if (!acpi_power_dir) acpi_power_dir = proc_mkdir(ACPI_BUTTON_SUBCLASS_POWER, acpi_button_dir); entry = acpi_power_dir; break; case ACPI_BUTTON_TYPE_SLEEP: - case ACPI_BUTTON_TYPE_SLEEPF: if (!acpi_sleep_dir) acpi_sleep_dir = proc_mkdir(ACPI_BUTTON_SUBCLASS_SLEEP, acpi_button_dir); @@ -315,30 +309,18 @@ static int acpi_button_add(struct acpi_device *device) name = acpi_device_name(device); class = acpi_device_class(device); - /* - * Determine the button type (via hid), as fixed-feature buttons - * need to be handled a bit differently than generic-space. - */ - if (!strcmp(hid, ACPI_BUTTON_HID_POWER)) { + if (!strcmp(hid, ACPI_BUTTON_HID_POWER) || + !strcmp(hid, ACPI_BUTTON_HID_POWERF)) { button->type = ACPI_BUTTON_TYPE_POWER; strcpy(name, ACPI_BUTTON_DEVICE_NAME_POWER); sprintf(class, "%s/%s", ACPI_BUTTON_CLASS, ACPI_BUTTON_SUBCLASS_POWER); - } else if (!strcmp(hid, ACPI_BUTTON_HID_POWERF)) { - button->type = ACPI_BUTTON_TYPE_POWERF; - strcpy(name, ACPI_BUTTON_DEVICE_NAME_POWERF); - sprintf(class, "%s/%s", - ACPI_BUTTON_CLASS, ACPI_BUTTON_SUBCLASS_POWER); - } else if (!strcmp(hid, ACPI_BUTTON_HID_SLEEP)) { + } else if (!strcmp(hid, ACPI_BUTTON_HID_SLEEP) || + !strcmp(hid, ACPI_BUTTON_HID_SLEEPF)) { button->type = ACPI_BUTTON_TYPE_SLEEP; strcpy(name, ACPI_BUTTON_DEVICE_NAME_SLEEP); sprintf(class, "%s/%s", ACPI_BUTTON_CLASS, ACPI_BUTTON_SUBCLASS_SLEEP); - } else if (!strcmp(hid, ACPI_BUTTON_HID_SLEEPF)) { - button->type = ACPI_BUTTON_TYPE_SLEEPF; - strcpy(name, ACPI_BUTTON_DEVICE_NAME_SLEEPF); - sprintf(class, "%s/%s", - ACPI_BUTTON_CLASS, ACPI_BUTTON_SUBCLASS_SLEEP); } else if (!strcmp(hid, ACPI_BUTTON_HID_LID)) { button->type = ACPI_BUTTON_TYPE_LID; strcpy(name, ACPI_BUTTON_DEVICE_NAME_LID); @@ -364,13 +346,11 @@ static int acpi_button_add(struct acpi_device *device) switch (button->type) { case ACPI_BUTTON_TYPE_POWER: - case ACPI_BUTTON_TYPE_POWERF: input->evbit[0] = BIT_MASK(EV_KEY); set_bit(KEY_POWER, input->keybit); break; case ACPI_BUTTON_TYPE_SLEEP: - case ACPI_BUTTON_TYPE_SLEEPF: input->evbit[0] = BIT_MASK(EV_KEY); set_bit(KEY_SLEEP, input->keybit); break; -- cgit v1.2.3 From 82babbb3887e234c995626e4121d411ea9070ca5 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Wed, 8 Apr 2009 09:44:29 +0800 Subject: ACPI: Revert conflicting workaround for BIOS w/ mangled PRT entries 2f894ef9c8b36a35d80709bedca276d2fc691941 in Linux-2.6.21 worked around BIOS with mangled _PRT entries: http://bugzilla.kernel.org/show_bug.cgi?id=6859 d0e184abc5983281ef189db2c759d65d56eb1b80 worked around the same issue via ACPICA, and shipped in 2.6.27. Unfortunately the two workarounds conflict: http://bugzilla.kernel.org/show_bug.cgi?id=12270 So revert the Linux specific one. Signed-off-by: Zhang Rui Signed-off-by: Len Brown --- drivers/acpi/acpica/rscreate.c | 27 ++------------------------- 1 file changed, 2 insertions(+), 25 deletions(-) diff --git a/drivers/acpi/acpica/rscreate.c b/drivers/acpi/acpica/rscreate.c index 663f692fffc..a3c23d686d5 100644 --- a/drivers/acpi/acpica/rscreate.c +++ b/drivers/acpi/acpica/rscreate.c @@ -191,8 +191,6 @@ acpi_rs_create_pci_routing_table(union acpi_operand_object *package_object, user_prt = ACPI_CAST_PTR(struct acpi_pci_routing_table, buffer); for (index = 0; index < number_of_elements; index++) { - int source_name_index = 2; - int source_index_index = 3; /* * Point user_prt past this current structure @@ -261,27 +259,6 @@ acpi_rs_create_pci_routing_table(union acpi_operand_object *package_object, return_ACPI_STATUS(AE_BAD_DATA); } - /* - * If BIOS erroneously reversed the _PRT source_name and source_index, - * then reverse them back. - */ - if ((sub_object_list[3])->common.type != - ACPI_TYPE_INTEGER) { - if (acpi_gbl_enable_interpreter_slack) { - source_name_index = 3; - source_index_index = 2; - printk(KERN_WARNING - "ACPI: Handling Garbled _PRT entry\n"); - } else { - ACPI_ERROR((AE_INFO, - "(PRT[%X].source_index) Need Integer, found %s", - index, - acpi_ut_get_object_type_name - (sub_object_list[3]))); - return_ACPI_STATUS(AE_BAD_DATA); - } - } - user_prt->pin = (u32) obj_desc->integer.value; /* @@ -304,7 +281,7 @@ acpi_rs_create_pci_routing_table(union acpi_operand_object *package_object, * 3) Third subobject: Dereference the PRT.source_name * The name may be unresolved (slack mode), so allow a null object */ - obj_desc = sub_object_list[source_name_index]; + obj_desc = sub_object_list[2]; if (obj_desc) { switch (obj_desc->common.type) { case ACPI_TYPE_LOCAL_REFERENCE: @@ -378,7 +355,7 @@ acpi_rs_create_pci_routing_table(union acpi_operand_object *package_object, /* 4) Fourth subobject: Dereference the PRT.source_index */ - obj_desc = sub_object_list[source_index_index]; + obj_desc = sub_object_list[3]; if (obj_desc->common.type != ACPI_TYPE_INTEGER) { ACPI_ERROR((AE_INFO, "(PRT[%X].SourceIndex) Need Integer, found %s", -- cgit v1.2.3 From e047cca66c6bb0b1c346e91305011aab79dfc4b0 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Thu, 9 Apr 2009 14:24:35 +0800 Subject: ACPI video: handle indexed _BQC correctly MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In the current code, for a box with an indexed _BQC method, we 1. get the current brightness level by evaluating _BQC 2. set the value gotten in step 1 to _BCM 3. get the current brightness level again 4. set the _BQC_use_index flag if the results gotten in step 1 and in step 3 don't equal. But this logic doesn't work actually, because the _BQC_use_index is not set when acpi_video_device_lcd_set_level is invoked. This results in a failure in step 2. http://bugzilla.kernel.org/show_bug.cgi?id=12249#c83 Now, we set the _BQC_use_index flag after invoking _BQC for the first time. And reevaluate the _BQC to get the correct brightness level. Signed-off-by: Zhang Rui Signed-off-by: Len Brown --- drivers/acpi/video.c | 43 ++++++++++++++++++++++--------------------- 1 file changed, 22 insertions(+), 21 deletions(-) diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index cd4fb7543a9..346277f93cd 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -807,12 +807,19 @@ acpi_video_init_brightness(struct acpi_video_device *device) br->flags._BCM_use_index = br->flags._BCL_use_index; /* _BQC uses INDEX while _BCL uses VALUE in some laptops */ - br->curr = max_level; + br->curr = level_old = max_level; + + if (!device->cap._BQC) + goto set_level; + result = acpi_video_device_lcd_get_level_current(device, &level_old); if (result) goto out_free_levels; - result = acpi_video_device_lcd_set_level(device, br->curr); + /* + * Set the level to maximum and check if _BQC uses indexed value + */ + result = acpi_video_device_lcd_set_level(device, max_level); if (result) goto out_free_levels; @@ -820,25 +827,19 @@ acpi_video_init_brightness(struct acpi_video_device *device) if (result) goto out_free_levels; - if ((level != level_old) && !br->flags._BCM_use_index) { - /* Note: - * This piece of code does not work correctly if the current - * brightness levels is 0. - * But I guess boxes that boot with such a dark screen are rare - * and no more code is needed to cover this specifial case. - */ - - if (level_ac_battery != 2) { - /* - * For now, we don't support the _BCL like this: - * 16, 15, 0, 1, 2, 3, ..., 14, 15, 16 - * because we may mess up the index returned by _BQC. - * Plus: we have not got a box like this. - */ - ACPI_ERROR((AE_INFO, "_BCL not supported\n")); - } - br->flags._BQC_use_index = 1; - } + br->flags._BQC_use_index = (level == max_level ? 0 : 1); + + if (!br->flags._BQC_use_index) + goto set_level; + + if (br->flags._BCL_reversed) + level_old = (br->count - 1) - level_old; + level_old = br->levels[level_old]; + +set_level: + result = acpi_video_device_lcd_set_level(device, level_old); + if (result) + goto out_free_levels; ACPI_DEBUG_PRINT((ACPI_DB_INFO, "found %d brightness levels\n", count - 2)); -- cgit v1.2.3 From 6b82f3cb2d480b7714eb0ff61aee99c22160389e Mon Sep 17 00:00:00 2001 From: Chuck Ebbert Date: Tue, 14 Apr 2009 07:37:40 -0400 Subject: ext4: really print the find_group_flex fallback warning only once Missing braces caused the warning to print more than once. Signed-Off-By: Chuck Ebbert Signed-off-by: "Theodore Ts'o" --- fs/ext4/ialloc.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/ext4/ialloc.c b/fs/ext4/ialloc.c index 47b84e8df56..cbce5aa6b92 100644 --- a/fs/ext4/ialloc.c +++ b/fs/ext4/ialloc.c @@ -831,11 +831,12 @@ struct inode *ext4_new_inode(handle_t *handle, struct inode *dir, int mode) ret2 = find_group_flex(sb, dir, &group); if (ret2 == -1) { ret2 = find_group_other(sb, dir, &group, mode); - if (ret2 == 0 && once) + if (ret2 == 0 && once) { once = 0; printk(KERN_NOTICE "ext4: find_group_flex " "failed, fallback succeeded dir %lu\n", dir->i_ino); + } } goto got_group; } -- cgit v1.2.3 From 67c457a8c378a006a34d92f9bd3078a80a92f250 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Tue, 14 Apr 2009 07:50:56 -0400 Subject: jbd2: use SWRITE_SYNC_PLUG when writing synchronous revoke records The revoke records must be written using the same way as the rest of the blocks during the commit process; that is, either marked as synchronous writes or as asynchornous writes. Signed-off-by: "Theodore Ts'o" --- fs/jbd2/commit.c | 3 ++- fs/jbd2/revoke.c | 21 ++++++++++++--------- include/linux/jbd2.h | 3 ++- 3 files changed, 16 insertions(+), 11 deletions(-) diff --git a/fs/jbd2/commit.c b/fs/jbd2/commit.c index 073c8c3df7c..0b7d3b8226f 100644 --- a/fs/jbd2/commit.c +++ b/fs/jbd2/commit.c @@ -506,7 +506,8 @@ void jbd2_journal_commit_transaction(journal_t *journal) if (err) jbd2_journal_abort(journal, err); - jbd2_journal_write_revoke_records(journal, commit_transaction); + jbd2_journal_write_revoke_records(journal, commit_transaction, + write_op); jbd_debug(3, "JBD: commit phase 2\n"); diff --git a/fs/jbd2/revoke.c b/fs/jbd2/revoke.c index bbe6d592d8b..a360b06af2e 100644 --- a/fs/jbd2/revoke.c +++ b/fs/jbd2/revoke.c @@ -86,6 +86,7 @@ #include #include #include +#include #endif #include @@ -118,8 +119,8 @@ struct jbd2_revoke_table_s #ifdef __KERNEL__ static void write_one_revoke_record(journal_t *, transaction_t *, struct journal_head **, int *, - struct jbd2_revoke_record_s *); -static void flush_descriptor(journal_t *, struct journal_head *, int); + struct jbd2_revoke_record_s *, int); +static void flush_descriptor(journal_t *, struct journal_head *, int, int); #endif /* Utility functions to maintain the revoke table */ @@ -499,7 +500,8 @@ void jbd2_journal_switch_revoke_table(journal_t *journal) * revoke hash, deleting the entries as we go. */ void jbd2_journal_write_revoke_records(journal_t *journal, - transaction_t *transaction) + transaction_t *transaction, + int write_op) { struct journal_head *descriptor; struct jbd2_revoke_record_s *record; @@ -523,14 +525,14 @@ void jbd2_journal_write_revoke_records(journal_t *journal, hash_list->next; write_one_revoke_record(journal, transaction, &descriptor, &offset, - record); + record, write_op); count++; list_del(&record->hash); kmem_cache_free(jbd2_revoke_record_cache, record); } } if (descriptor) - flush_descriptor(journal, descriptor, offset); + flush_descriptor(journal, descriptor, offset, write_op); jbd_debug(1, "Wrote %d revoke records\n", count); } @@ -543,7 +545,8 @@ static void write_one_revoke_record(journal_t *journal, transaction_t *transaction, struct journal_head **descriptorp, int *offsetp, - struct jbd2_revoke_record_s *record) + struct jbd2_revoke_record_s *record, + int write_op) { struct journal_head *descriptor; int offset; @@ -562,7 +565,7 @@ static void write_one_revoke_record(journal_t *journal, /* Make sure we have a descriptor with space left for the record */ if (descriptor) { if (offset == journal->j_blocksize) { - flush_descriptor(journal, descriptor, offset); + flush_descriptor(journal, descriptor, offset, write_op); descriptor = NULL; } } @@ -607,7 +610,7 @@ static void write_one_revoke_record(journal_t *journal, static void flush_descriptor(journal_t *journal, struct journal_head *descriptor, - int offset) + int offset, int write_op) { jbd2_journal_revoke_header_t *header; struct buffer_head *bh = jh2bh(descriptor); @@ -622,7 +625,7 @@ static void flush_descriptor(journal_t *journal, set_buffer_jwrite(bh); BUFFER_TRACE(bh, "write"); set_buffer_dirty(bh); - ll_rw_block(SWRITE, 1, &bh); + ll_rw_block((write_op == WRITE) ? SWRITE : SWRITE_SYNC_PLUG, 1, &bh); } #endif diff --git a/include/linux/jbd2.h b/include/linux/jbd2.h index 8815a3456b3..cc02393bfce 100644 --- a/include/linux/jbd2.h +++ b/include/linux/jbd2.h @@ -1193,7 +1193,8 @@ extern int jbd2_journal_init_revoke_caches(void); extern void jbd2_journal_destroy_revoke(journal_t *); extern int jbd2_journal_revoke (handle_t *, unsigned long long, struct buffer_head *); extern int jbd2_journal_cancel_revoke(handle_t *, struct journal_head *); -extern void jbd2_journal_write_revoke_records(journal_t *, transaction_t *); +extern void jbd2_journal_write_revoke_records(journal_t *, + transaction_t *, int); /* Recovery revoke support */ extern int jbd2_journal_set_revoke(journal_t *, unsigned long long, tid_t); -- cgit v1.2.3 From 38d726d153cfe5efe5fe22d28d36ab382dda3a5c Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Tue, 14 Apr 2009 10:10:47 -0400 Subject: jbd: use SWRITE_SYNC_PLUG when writing synchronous revoke records The revoke records must be written using the same way as the rest of the blocks during the commit process; that is, either marked as synchronous writes or as asynchornous writes. Signed-off-by: "Theodore Ts'o" --- fs/jbd/commit.c | 2 +- fs/jbd/revoke.c | 20 +++++++++++--------- include/linux/jbd.h | 3 ++- 3 files changed, 14 insertions(+), 11 deletions(-) diff --git a/fs/jbd/commit.c b/fs/jbd/commit.c index a8e8513a78a..06560c520f4 100644 --- a/fs/jbd/commit.c +++ b/fs/jbd/commit.c @@ -502,7 +502,7 @@ void journal_commit_transaction(journal_t *journal) err = 0; } - journal_write_revoke_records(journal, commit_transaction); + journal_write_revoke_records(journal, commit_transaction, write_op); /* * If we found any dirty or locked buffers, then we should have diff --git a/fs/jbd/revoke.c b/fs/jbd/revoke.c index c7bd649bbbd..1b1a06e1c83 100644 --- a/fs/jbd/revoke.c +++ b/fs/jbd/revoke.c @@ -67,6 +67,7 @@ #include #include #include +#include #endif #include @@ -99,8 +100,8 @@ struct jbd_revoke_table_s #ifdef __KERNEL__ static void write_one_revoke_record(journal_t *, transaction_t *, struct journal_head **, int *, - struct jbd_revoke_record_s *); -static void flush_descriptor(journal_t *, struct journal_head *, int); + struct jbd_revoke_record_s *, int); +static void flush_descriptor(journal_t *, struct journal_head *, int, int); #endif /* Utility functions to maintain the revoke table */ @@ -486,7 +487,7 @@ void journal_switch_revoke_table(journal_t *journal) */ void journal_write_revoke_records(journal_t *journal, - transaction_t *transaction) + transaction_t *transaction, int write_op) { struct journal_head *descriptor; struct jbd_revoke_record_s *record; @@ -510,14 +511,14 @@ void journal_write_revoke_records(journal_t *journal, hash_list->next; write_one_revoke_record(journal, transaction, &descriptor, &offset, - record); + record, write_op); count++; list_del(&record->hash); kmem_cache_free(revoke_record_cache, record); } } if (descriptor) - flush_descriptor(journal, descriptor, offset); + flush_descriptor(journal, descriptor, offset, write_op); jbd_debug(1, "Wrote %d revoke records\n", count); } @@ -530,7 +531,8 @@ static void write_one_revoke_record(journal_t *journal, transaction_t *transaction, struct journal_head **descriptorp, int *offsetp, - struct jbd_revoke_record_s *record) + struct jbd_revoke_record_s *record, + int write_op) { struct journal_head *descriptor; int offset; @@ -549,7 +551,7 @@ static void write_one_revoke_record(journal_t *journal, /* Make sure we have a descriptor with space left for the record */ if (descriptor) { if (offset == journal->j_blocksize) { - flush_descriptor(journal, descriptor, offset); + flush_descriptor(journal, descriptor, offset, write_op); descriptor = NULL; } } @@ -586,7 +588,7 @@ static void write_one_revoke_record(journal_t *journal, static void flush_descriptor(journal_t *journal, struct journal_head *descriptor, - int offset) + int offset, int write_op) { journal_revoke_header_t *header; struct buffer_head *bh = jh2bh(descriptor); @@ -601,7 +603,7 @@ static void flush_descriptor(journal_t *journal, set_buffer_jwrite(bh); BUFFER_TRACE(bh, "write"); set_buffer_dirty(bh); - ll_rw_block(SWRITE, 1, &bh); + ll_rw_block((write_op == WRITE) ? SWRITE : SWRITE_SYNC_PLUG, 1, &bh); } #endif diff --git a/include/linux/jbd.h b/include/linux/jbd.h index 53ae4399da2..c2049a04fa0 100644 --- a/include/linux/jbd.h +++ b/include/linux/jbd.h @@ -978,7 +978,8 @@ extern void journal_destroy_revoke(journal_t *); extern int journal_revoke (handle_t *, unsigned long, struct buffer_head *); extern int journal_cancel_revoke(handle_t *, struct journal_head *); -extern void journal_write_revoke_records(journal_t *, transaction_t *); +extern void journal_write_revoke_records(journal_t *, + transaction_t *, int); /* Recovery revoke support */ extern int journal_set_revoke(journal_t *, unsigned long, tid_t); -- cgit v1.2.3 From 5e901b37e4a8a305542ad3a776bce997efd7e5e9 Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Thu, 9 Apr 2009 14:07:27 +0800 Subject: [ARM] pxa/magician: remove un-necessary #include of pxa-regs.h and hardware.h Signed-off-by: Eric Miao Cc: Philipp Zabel Cc: Mark Brown --- sound/soc/pxa/magician.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/sound/soc/pxa/magician.c b/sound/soc/pxa/magician.c index f7c4544f785..0625c342a1c 100644 --- a/sound/soc/pxa/magician.c +++ b/sound/soc/pxa/magician.c @@ -27,8 +27,6 @@ #include #include -#include -#include #include #include #include "../codecs/uda1380.h" -- cgit v1.2.3 From eae17754ab1ffc88190ebcbd33b6bec79e6e559a Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 13 Apr 2009 11:48:03 +0100 Subject: [ARM] pxa: merge AC97 platform data structures Currently there are two possible platform datas for the PXA AC97 driver: one supported by the generic AC97 driver only which provides callbacks to allow board-specific configuration at stream startup and teardown, and another for pxa2xx-ac97-lib which allows configuration of the reset GPIO for PXA2xx CPUs. Obviously this won't actually work when using the generic AC97 driver since the drivers will attempt to parse the platform data in both formats. Fix this by merging the two structures. Signed-off-by: Mark Brown Acked-by: Robert Jarzmik Cc: Marek Vasut Signed-off-by: Eric Miao --- arch/arm/mach-pxa/include/mach/audio.h | 10 ++++++++++ include/sound/pxa2xx-lib.h | 15 --------------- sound/arm/pxa2xx-ac97-lib.c | 2 +- 3 files changed, 11 insertions(+), 16 deletions(-) diff --git a/arch/arm/mach-pxa/include/mach/audio.h b/arch/arm/mach-pxa/include/mach/audio.h index f82f96dd105..16eb02552d5 100644 --- a/arch/arm/mach-pxa/include/mach/audio.h +++ b/arch/arm/mach-pxa/include/mach/audio.h @@ -4,12 +4,22 @@ #include #include +/* + * @reset_gpio: AC97 reset gpio (normally gpio113 or gpio95) + * a -1 value means no gpio will be used for reset + + * reset_gpio should only be specified for pxa27x CPUs where a silicon + * bug prevents correct operation of the reset line. If not specified, + * the default behaviour on these CPUs is to consider gpio 113 as the + * AC97 reset line, which is the default on most boards. + */ typedef struct { int (*startup)(struct snd_pcm_substream *, void *); void (*shutdown)(struct snd_pcm_substream *, void *); void (*suspend)(void *); void (*resume)(void *); void *priv; + int reset_gpio; } pxa2xx_audio_ops_t; extern void pxa_set_ac97_info(pxa2xx_audio_ops_t *ops); diff --git a/include/sound/pxa2xx-lib.h b/include/sound/pxa2xx-lib.h index 2c894b600e5..2fd3d251d9a 100644 --- a/include/sound/pxa2xx-lib.h +++ b/include/sound/pxa2xx-lib.h @@ -42,19 +42,4 @@ extern int pxa2xx_ac97_hw_resume(void); extern int pxa2xx_ac97_hw_probe(struct platform_device *dev); extern void pxa2xx_ac97_hw_remove(struct platform_device *dev); -/* AC97 platform_data */ -/** - * struct pxa2xx_ac97_platform_data - pxa ac97 platform data - * @reset_gpio: AC97 reset gpio (normally gpio113 or gpio95) - * a -1 value means no gpio will be used for reset - * - * Platform data should only be specified for pxa27x CPUs where a silicon bug - * prevents correct operation of the reset line. If not specified, the default - * behaviour is to consider gpio 113 as the AC97 reset line, which is the - * default on most boards. - */ -struct pxa2xx_ac97_platform_data { - int reset_gpio; -}; - #endif diff --git a/sound/arm/pxa2xx-ac97-lib.c b/sound/arm/pxa2xx-ac97-lib.c index 0afd1a8226f..a2c12d105c9 100644 --- a/sound/arm/pxa2xx-ac97-lib.c +++ b/sound/arm/pxa2xx-ac97-lib.c @@ -364,7 +364,7 @@ EXPORT_SYMBOL_GPL(pxa2xx_ac97_hw_resume); int __devinit pxa2xx_ac97_hw_probe(struct platform_device *dev) { int ret; - struct pxa2xx_ac97_platform_data *pdata = dev->dev.platform_data; + pxa2xx_audio_ops_t *pdata = dev->dev.platform_data; if (pdata) { switch (pdata->reset_gpio) { -- cgit v1.2.3 From cc8d2730ad6fe79699cedd9cccfe632570830c3c Mon Sep 17 00:00:00 2001 From: Robert Jarzmik Date: Mon, 13 Apr 2009 16:07:55 +0200 Subject: [ARM] pxa/mioa701: use GPIO95 as AC97 reset line MioA701 board's GPIO95 is the AC97 line. The other GPIO113 is not connected to the sound chip, but to the GSM chip as a wakeup line. It happens that when the pxa2xx_ac97 driver reconfigures the gpio as an "out gpio" for AC97 reset (bug workaround), it hangs the GSM chip. As AC97 platform data now enables to specify the AC97 reset line, use it. Signed-off-by: Robert Jarzmik Signed-off-by: Eric Miao --- arch/arm/mach-pxa/mioa701.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c index 9203b069b35..ff8052ce0a0 100644 --- a/arch/arm/mach-pxa/mioa701.c +++ b/arch/arm/mach-pxa/mioa701.c @@ -742,6 +742,10 @@ struct i2c_pxa_platform_data i2c_pdata = { .fast_mode = 1, }; +static pxa2xx_audio_ops_t mioa701_ac97_info = { + .reset_gpio = 95, +}; + /* * Mio global */ @@ -815,7 +819,7 @@ static void __init mioa701_machine_init(void) pxa_set_keypad_info(&mioa701_keypad_info); wm97xx_bat_set_pdata(&mioa701_battery_data); pxa_set_udc_info(&mioa701_udc_info); - pxa_set_ac97_info(NULL); + pxa_set_ac97_info(&mioa701_ac97_info); pm_power_off = mioa701_poweroff; arm_pm_restart = mioa701_restart; platform_add_devices(devices, ARRAY_SIZE(devices)); -- cgit v1.2.3 From b6f0a3652ea9d2296fdc98c3b2c96603be611c4d Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 15 Apr 2009 12:16:19 +0200 Subject: netfilter: nf_log regression fix commit ca735b3aaa945626ba65a3e51145bfe4ecd9e222 'netfilter: use a linked list of loggers' introduced an array of list_head in "struct nf_logger", but forgot to initialize it in nf_log_register(). This resulted in oops when calling nf_log_unregister() at module unload time. Reported-and-tested-by: Mariusz Kozlowski Signed-off-by: Eric Dumazet Acked-by: Eric Leblond Signed-off-by: Patrick McHardy --- net/netfilter/nf_log.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/net/netfilter/nf_log.c b/net/netfilter/nf_log.c index 8bb998fe098..beb37311e1a 100644 --- a/net/netfilter/nf_log.c +++ b/net/netfilter/nf_log.c @@ -36,10 +36,14 @@ static struct nf_logger *__find_logger(int pf, const char *str_logger) int nf_log_register(u_int8_t pf, struct nf_logger *logger) { const struct nf_logger *llog; + int i; if (pf >= ARRAY_SIZE(nf_loggers)) return -EINVAL; + for (i = 0; i < ARRAY_SIZE(logger->list); i++) + INIT_LIST_HEAD(&logger->list[i]); + mutex_lock(&nf_log_mutex); if (pf == NFPROTO_UNSPEC) { -- cgit v1.2.3 From 38fb0afcd8761f8858e27135ed89a65117e2019c Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Wed, 15 Apr 2009 12:45:08 +0200 Subject: netfilter: nf_conntrack: fix crash when unloading helpers Commit ea781f197d (netfilter: nf_conntrack: use SLAB_DESTROY_BY_RCU and) get rid of call_rcu() was missing one conversion to the hlist_nulls functions, causing a crash when unloading conntrack helper modules. Reported-and-tested-by: Mariusz Kozlowski Signed-off-by: Patrick McHardy --- net/netfilter/nf_conntrack_helper.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/netfilter/nf_conntrack_helper.c b/net/netfilter/nf_conntrack_helper.c index 30b8e9009f9..0fa5a422959 100644 --- a/net/netfilter/nf_conntrack_helper.c +++ b/net/netfilter/nf_conntrack_helper.c @@ -176,7 +176,7 @@ static void __nf_conntrack_helper_unregister(struct nf_conntrack_helper *me, } /* Get rid of expecteds, set helpers to NULL. */ - hlist_for_each_entry(h, nn, &net->ct.unconfirmed, hnnode) + hlist_nulls_for_each_entry(h, nn, &net->ct.unconfirmed, hnnode) unhelp(h, me); for (i = 0; i < nf_conntrack_htable_size; i++) { hlist_nulls_for_each_entry(h, nn, &net->ct.hash[i], hnnode) -- cgit v1.2.3 From b8b47bfbe4eb1ae0e6891e49c86a5f4fb00413be Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 11 Mar 2009 15:41:51 +0900 Subject: sh: pass along struct pci_channel These patches rework the pci code for the sh architecture. Currently each board implements some kind of ioport to address mapping. Some boards use generic_io_base others try passing addresses as io ports. This is the first set of patches that try to unify the pci code as much as possible to avoid duplicated code. This will in the end lead to fewer lines board specific code and more generic code. This patch makes sure a struct pci_channel pointer is passed along to various pci functions such as pci_read_reg(), pci_write_reg(), pci_fixup_pcic(), sh7751_pcic_init() and sh7780_pcic_init(). Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/drivers/pci/fixups-lboxre2.c | 23 +++++------ arch/sh/drivers/pci/fixups-r7780rp.c | 33 ++++++++-------- arch/sh/drivers/pci/fixups-rts7751r2d.c | 23 +++++------ arch/sh/drivers/pci/fixups-sdk7780.c | 46 +++++++++++----------- arch/sh/drivers/pci/fixups-se7780.c | 32 ++++++++-------- arch/sh/drivers/pci/ops-landisk.c | 2 +- arch/sh/drivers/pci/ops-lboxre2.c | 2 +- arch/sh/drivers/pci/ops-r7780rp.c | 2 +- arch/sh/drivers/pci/ops-rts7751r2d.c | 2 +- arch/sh/drivers/pci/ops-sdk7780.c | 2 +- arch/sh/drivers/pci/ops-se7780.c | 2 +- arch/sh/drivers/pci/ops-sh4.c | 24 ++++++------ arch/sh/drivers/pci/ops-snapgear.c | 2 +- arch/sh/drivers/pci/ops-titan.c | 2 +- arch/sh/drivers/pci/pci-sh4.h | 11 ++++-- arch/sh/drivers/pci/pci-sh7751.c | 68 +++++++++++++++++---------------- arch/sh/drivers/pci/pci-sh7751.h | 3 +- arch/sh/drivers/pci/pci-sh7780.c | 31 +++++++-------- arch/sh/drivers/pci/pci-sh7780.h | 3 +- 19 files changed, 164 insertions(+), 149 deletions(-) diff --git a/arch/sh/drivers/pci/fixups-lboxre2.c b/arch/sh/drivers/pci/fixups-lboxre2.c index 1c1d41255ec..a82011d03cb 100644 --- a/arch/sh/drivers/pci/fixups-lboxre2.c +++ b/arch/sh/drivers/pci/fixups-lboxre2.c @@ -9,33 +9,34 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. */ +#include #include "pci-sh4.h" #define PCIMCR_MRSET_OFF 0xBFFFFFFF #define PCIMCR_RFSH_OFF 0xFFFFFFFB -int pci_fixup_pcic(void) +int pci_fixup_pcic(struct pci_channel *chan) { unsigned long bcr1, mcr; bcr1 = ctrl_inl(SH7751_BCR1); bcr1 |= 0x40080000; /* Enable Bit 19 BREQEN, set PCIC to slave */ - pci_write_reg(bcr1, SH4_PCIBCR1); + pci_write_reg(chan, bcr1, SH4_PCIBCR1); /* Enable all interrupts, so we known what to fix */ - pci_write_reg(0x0000c3ff, SH4_PCIINTM); - pci_write_reg(0x0000380f, SH4_PCIAINTM); - pci_write_reg(0xfb900047, SH7751_PCICONF1); - pci_write_reg(0xab000001, SH7751_PCICONF4); + pci_write_reg(chan, 0x0000c3ff, SH4_PCIINTM); + pci_write_reg(chan, 0x0000380f, SH4_PCIAINTM); + pci_write_reg(chan, 0xfb900047, SH7751_PCICONF1); + pci_write_reg(chan, 0xab000001, SH7751_PCICONF4); mcr = ctrl_inl(SH7751_MCR); mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF; - pci_write_reg(mcr, SH4_PCIMCR); + pci_write_reg(chan, mcr, SH4_PCIMCR); - pci_write_reg(0x0c000000, SH7751_PCICONF5); - pci_write_reg(0xd0000000, SH7751_PCICONF6); - pci_write_reg(0x0c000000, SH4_PCILAR0); - pci_write_reg(0x00000000, SH4_PCILAR1); + pci_write_reg(chan, 0x0c000000, SH7751_PCICONF5); + pci_write_reg(chan, 0xd0000000, SH7751_PCICONF6); + pci_write_reg(chan, 0x0c000000, SH4_PCILAR0); + pci_write_reg(chan, 0x00000000, SH4_PCILAR1); return 0; } diff --git a/arch/sh/drivers/pci/fixups-r7780rp.c b/arch/sh/drivers/pci/fixups-r7780rp.c index 3e321df65d2..5b25021bbd6 100644 --- a/arch/sh/drivers/pci/fixups-r7780rp.c +++ b/arch/sh/drivers/pci/fixups-r7780rp.c @@ -14,32 +14,33 @@ #include "pci-sh4.h" #include -int pci_fixup_pcic(void) +int pci_fixup_pcic(struct pci_channel *chan) { - pci_write_reg(0x000043ff, SH4_PCIINTM); - pci_write_reg(0x0000380f, SH4_PCIAINTM); + pci_write_reg(chan, 0x000043ff, SH4_PCIINTM); + pci_write_reg(chan, 0x0000380f, SH4_PCIAINTM); - pci_write_reg(0xfbb00047, SH7780_PCICMD); - pci_write_reg(0x00000000, SH7780_PCIIBAR); + pci_write_reg(chan, 0xfbb00047, SH7780_PCICMD); + pci_write_reg(chan, 0x00000000, SH7780_PCIIBAR); - pci_write_reg(0x00011912, SH7780_PCISVID); - pci_write_reg(0x08000000, SH7780_PCICSCR0); - pci_write_reg(0x0000001b, SH7780_PCICSAR0); - pci_write_reg(0xfd000000, SH7780_PCICSCR1); - pci_write_reg(0x0000000f, SH7780_PCICSAR1); + pci_write_reg(chan, 0x00011912, SH7780_PCISVID); + pci_write_reg(chan, 0x08000000, SH7780_PCICSCR0); + pci_write_reg(chan, 0x0000001b, SH7780_PCICSAR0); + pci_write_reg(chan, 0xfd000000, SH7780_PCICSCR1); + pci_write_reg(chan, 0x0000000f, SH7780_PCICSAR1); - pci_write_reg(0xfd000000, SH7780_PCIMBR0); - pci_write_reg(0x00fc0000, SH7780_PCIMBMR0); + pci_write_reg(chan, 0xfd000000, SH7780_PCIMBR0); + pci_write_reg(chan, 0x00fc0000, SH7780_PCIMBMR0); #ifdef CONFIG_32BIT - pci_write_reg(0xc0000000, SH7780_PCIMBR2); - pci_write_reg(0x20000000 - SH7780_PCI_IO_SIZE, SH7780_PCIMBMR2); + pci_write_reg(chan, 0xc0000000, SH7780_PCIMBR2); + pci_write_reg(chan, 0x20000000 - SH7780_PCI_IO_SIZE, SH7780_PCIMBMR2); #endif /* Set IOBR for windows containing area specified in pci.h */ - pci_write_reg((PCIBIOS_MIN_IO & ~(SH7780_PCI_IO_SIZE - 1)), + pci_write_reg(chan, (PCIBIOS_MIN_IO & ~(SH7780_PCI_IO_SIZE - 1)), SH7780_PCIIOBR); - pci_write_reg(((SH7780_PCI_IO_SIZE-1) & (7<<18)), SH7780_PCIIOBMR); + pci_write_reg(chan, ((SH7780_PCI_IO_SIZE-1) & (7<<18)), + SH7780_PCIIOBMR); return 0; } diff --git a/arch/sh/drivers/pci/fixups-rts7751r2d.c b/arch/sh/drivers/pci/fixups-rts7751r2d.c index 904bce8768d..38852334d47 100644 --- a/arch/sh/drivers/pci/fixups-rts7751r2d.c +++ b/arch/sh/drivers/pci/fixups-rts7751r2d.c @@ -10,34 +10,35 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. */ +#include #include "pci-sh4.h" #define PCIMCR_MRSET_OFF 0xBFFFFFFF #define PCIMCR_RFSH_OFF 0xFFFFFFFB -int pci_fixup_pcic(void) +int pci_fixup_pcic(struct pci_channel *chan) { unsigned long bcr1, mcr; bcr1 = ctrl_inl(SH7751_BCR1); bcr1 |= 0x40080000; /* Enable Bit 19 BREQEN, set PCIC to slave */ - pci_write_reg(bcr1, SH4_PCIBCR1); + pci_write_reg(chan, bcr1, SH4_PCIBCR1); /* Enable all interrupts, so we known what to fix */ - pci_write_reg(0x0000c3ff, SH4_PCIINTM); - pci_write_reg(0x0000380f, SH4_PCIAINTM); + pci_write_reg(chan, 0x0000c3ff, SH4_PCIINTM); + pci_write_reg(chan, 0x0000380f, SH4_PCIAINTM); - pci_write_reg(0xfb900047, SH7751_PCICONF1); - pci_write_reg(0xab000001, SH7751_PCICONF4); + pci_write_reg(chan, 0xfb900047, SH7751_PCICONF1); + pci_write_reg(chan, 0xab000001, SH7751_PCICONF4); mcr = ctrl_inl(SH7751_MCR); mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF; - pci_write_reg(mcr, SH4_PCIMCR); + pci_write_reg(chan, mcr, SH4_PCIMCR); - pci_write_reg(0x0c000000, SH7751_PCICONF5); - pci_write_reg(0xd0000000, SH7751_PCICONF6); - pci_write_reg(0x0c000000, SH4_PCILAR0); - pci_write_reg(0x00000000, SH4_PCILAR1); + pci_write_reg(chan, 0x0c000000, SH7751_PCICONF5); + pci_write_reg(chan, 0xd0000000, SH7751_PCICONF6); + pci_write_reg(chan, 0x0c000000, SH4_PCILAR0); + pci_write_reg(chan, 0x00000000, SH4_PCILAR1); return 0; } diff --git a/arch/sh/drivers/pci/fixups-sdk7780.c b/arch/sh/drivers/pci/fixups-sdk7780.c index 2f8863099dd..3f6754a120e 100644 --- a/arch/sh/drivers/pci/fixups-sdk7780.c +++ b/arch/sh/drivers/pci/fixups-sdk7780.c @@ -14,46 +14,48 @@ #include "pci-sh4.h" #include -int pci_fixup_pcic(void) +int pci_fixup_pcic(struct pci_channel *chan) { ctrl_outl(0x00000001, SH7780_PCI_VCR2); /* Enable all interrupts, so we know what to fix */ - pci_write_reg(0x0000C3FF, SH7780_PCIIMR); - pci_write_reg(0x0000380F, SH7780_PCIAINTM); + pci_write_reg(chan, 0x0000C3FF, SH7780_PCIIMR); + pci_write_reg(chan, 0x0000380F, SH7780_PCIAINTM); /* Set up standard PCI config registers */ - pci_write_reg(0xFB00, SH7780_PCISTATUS); - pci_write_reg(0x0047, SH7780_PCICMD); - pci_write_reg(0x00, SH7780_PCIPIF); - pci_write_reg(0x00, SH7780_PCISUB); - pci_write_reg(0x06, SH7780_PCIBCC); - pci_write_reg(0x1912, SH7780_PCISVID); - pci_write_reg(0x0001, SH7780_PCISID); + pci_write_reg(chan, 0xFB00, SH7780_PCISTATUS); + pci_write_reg(chan, 0x0047, SH7780_PCICMD); + pci_write_reg(chan, 0x00, SH7780_PCIPIF); + pci_write_reg(chan, 0x00, SH7780_PCISUB); + pci_write_reg(chan, 0x06, SH7780_PCIBCC); + pci_write_reg(chan, 0x1912, SH7780_PCISVID); + pci_write_reg(chan, 0x0001, SH7780_PCISID); - pci_write_reg(0x08000000, SH7780_PCIMBAR0); /* PCI */ - pci_write_reg(0x08000000, SH7780_PCILAR0); /* SHwy */ - pci_write_reg(0x07F00001, SH7780_PCILSR); /* size 128M w/ MBAR */ + pci_write_reg(chan, 0x08000000, SH7780_PCIMBAR0); /* PCI */ + pci_write_reg(chan, 0x08000000, SH7780_PCILAR0); /* SHwy */ + pci_write_reg(chan, 0x07F00001, SH7780_PCILSR); /* size 128M w/ MBAR */ - pci_write_reg(0x00000000, SH7780_PCIMBAR1); - pci_write_reg(0x00000000, SH7780_PCILAR1); - pci_write_reg(0x00000000, SH7780_PCILSR1); + pci_write_reg(chan, 0x00000000, SH7780_PCIMBAR1); + pci_write_reg(chan, 0x00000000, SH7780_PCILAR1); + pci_write_reg(chan, 0x00000000, SH7780_PCILSR1); - pci_write_reg(0xAB000801, SH7780_PCIIBAR); + pci_write_reg(chan, 0xAB000801, SH7780_PCIIBAR); /* * Set the MBR so PCI address is one-to-one with window, * meaning all calls go straight through... use ifdef to * catch erroneous assumption. */ - pci_write_reg(0xFD000000 , SH7780_PCIMBR0); - pci_write_reg(0x00FC0000 , SH7780_PCIMBMR0); /* 16M */ + pci_write_reg(chan, 0xFD000000 , SH7780_PCIMBR0); + pci_write_reg(chan, 0x00FC0000 , SH7780_PCIMBMR0); /* 16M */ /* Set IOBR for window containing area specified in pci.h */ - pci_write_reg(PCIBIOS_MIN_IO & ~(SH7780_PCI_IO_SIZE-1), SH7780_PCIIOBR); - pci_write_reg((SH7780_PCI_IO_SIZE-1) & (7 << 18), SH7780_PCIIOBMR); + pci_write_reg(chan, PCIBIOS_MIN_IO & ~(SH7780_PCI_IO_SIZE-1), + SH7780_PCIIOBR); + pci_write_reg(chan, (SH7780_PCI_IO_SIZE-1) & (7 << 18), + SH7780_PCIIOBMR); - pci_write_reg(0xA5000C01, SH7780_PCICR); + pci_write_reg(chan, 0xA5000C01, SH7780_PCICR); return 0; } diff --git a/arch/sh/drivers/pci/fixups-se7780.c b/arch/sh/drivers/pci/fixups-se7780.c index 880cea1c0d8..b8e735e01c3 100644 --- a/arch/sh/drivers/pci/fixups-se7780.c +++ b/arch/sh/drivers/pci/fixups-se7780.c @@ -15,13 +15,13 @@ #include "pci-sh4.h" #include -int pci_fixup_pcic(void) +int pci_fixup_pcic(struct pci_channel *chan) { ctrl_outl(0x00000001, SH7780_PCI_VCR2); /* Enable all interrupts, so we know what to fix */ - pci_write_reg(0x0000C3FF, SH7780_PCIIMR); - pci_write_reg(0x0000380F, SH7780_PCIAINTM); + pci_write_reg(chan, 0x0000C3FF, SH7780_PCIIMR); + pci_write_reg(chan, 0x0000380F, SH7780_PCIAINTM); /* Set up standard PCI config registers */ ctrl_outw(0xFB00, PCI_REG(SH7780_PCISTATUS)); @@ -32,29 +32,31 @@ int pci_fixup_pcic(void) ctrl_outw(0x1912, PCI_REG(SH7780_PCISVID)); ctrl_outw(0x0001, PCI_REG(SH7780_PCISID)); - pci_write_reg(0x08000000, SH7780_PCIMBAR0); /* PCI */ - pci_write_reg(0x08000000, SH7780_PCILAR0); /* SHwy */ - pci_write_reg(0x07F00001, SH7780_PCILSR); /* size 128M w/ MBAR */ + pci_write_reg(chan, 0x08000000, SH7780_PCIMBAR0); /* PCI */ + pci_write_reg(chan, 0x08000000, SH7780_PCILAR0); /* SHwy */ + pci_write_reg(chan, 0x07F00001, SH7780_PCILSR); /* size 128M w/ MBAR */ - pci_write_reg(0x00000000, SH7780_PCIMBAR1); - pci_write_reg(0x00000000, SH7780_PCILAR1); - pci_write_reg(0x00000000, SH7780_PCILSR1); + pci_write_reg(chan, 0x00000000, SH7780_PCIMBAR1); + pci_write_reg(chan, 0x00000000, SH7780_PCILAR1); + pci_write_reg(chan, 0x00000000, SH7780_PCILSR1); - pci_write_reg(0xAB000801, SH7780_PCIIBAR); + pci_write_reg(chan, 0xAB000801, SH7780_PCIIBAR); /* * Set the MBR so PCI address is one-to-one with window, * meaning all calls go straight through... use ifdef to * catch erroneous assumption. */ - pci_write_reg(0xFD000000 , SH7780_PCIMBR0); - pci_write_reg(0x00FC0000 , SH7780_PCIMBMR0); /* 16M */ + pci_write_reg(chan, 0xFD000000 , SH7780_PCIMBR0); + pci_write_reg(chan, 0x00FC0000 , SH7780_PCIMBMR0); /* 16M */ /* Set IOBR for window containing area specified in pci.h */ - pci_write_reg(PCIBIOS_MIN_IO & ~(SH7780_PCI_IO_SIZE-1), SH7780_PCIIOBR); - pci_write_reg((SH7780_PCI_IO_SIZE-1) & (7 << 18), SH7780_PCIIOBMR); + pci_write_reg(chan, PCIBIOS_MIN_IO & ~(SH7780_PCI_IO_SIZE-1), + SH7780_PCIIOBR); + pci_write_reg(chan, (SH7780_PCI_IO_SIZE-1) & (7 << 18), + SH7780_PCIIOBMR); - pci_write_reg(0xA5000C01, SH7780_PCICR); + pci_write_reg(chan, 0xA5000C01, SH7780_PCICR); return 0; } diff --git a/arch/sh/drivers/pci/ops-landisk.c b/arch/sh/drivers/pci/ops-landisk.c index bff09ecf341..343c072a5a7 100644 --- a/arch/sh/drivers/pci/ops-landisk.c +++ b/arch/sh/drivers/pci/ops-landisk.c @@ -45,7 +45,7 @@ static struct sh4_pci_address_map sh7751_pci_map = { int __init pcibios_init_platform(void) { - return sh7751_pcic_init(&sh7751_pci_map); + return sh7751_pcic_init(&board_pci_channels[0], &sh7751_pci_map); } int pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) diff --git a/arch/sh/drivers/pci/ops-lboxre2.c b/arch/sh/drivers/pci/ops-lboxre2.c index 86c0b6fb737..8bff32a2210 100644 --- a/arch/sh/drivers/pci/ops-lboxre2.c +++ b/arch/sh/drivers/pci/ops-lboxre2.c @@ -59,5 +59,5 @@ static struct sh4_pci_address_map sh7751_pci_map = { int __init pcibios_init_platform(void) { - return sh7751_pcic_init(&sh7751_pci_map); + return sh7751_pcic_init(&board_pci_channels[0], &sh7751_pci_map); } diff --git a/arch/sh/drivers/pci/ops-r7780rp.c b/arch/sh/drivers/pci/ops-r7780rp.c index 8555238e63e..bf32ee8b132 100644 --- a/arch/sh/drivers/pci/ops-r7780rp.c +++ b/arch/sh/drivers/pci/ops-r7780rp.c @@ -64,5 +64,5 @@ static struct sh4_pci_address_map sh7780_pci_map = { int __init pcibios_init_platform(void) { - return sh7780_pcic_init(&sh7780_pci_map); + return sh7780_pcic_init(&board_pci_channels[0], &sh7780_pci_map); } diff --git a/arch/sh/drivers/pci/ops-rts7751r2d.c b/arch/sh/drivers/pci/ops-rts7751r2d.c index d6ca74b25d5..e4208a69732 100644 --- a/arch/sh/drivers/pci/ops-rts7751r2d.c +++ b/arch/sh/drivers/pci/ops-rts7751r2d.c @@ -69,6 +69,6 @@ static struct sh4_pci_address_map sh7751_pci_map = { int __init pcibios_init_platform(void) { __set_io_port_base(SH7751_PCI_IO_BASE); - return sh7751_pcic_init(&sh7751_pci_map); + return sh7751_pcic_init(&board_pci_channels[0], &sh7751_pci_map); } diff --git a/arch/sh/drivers/pci/ops-sdk7780.c b/arch/sh/drivers/pci/ops-sdk7780.c index 4dcc64184b2..21d59d4a215 100644 --- a/arch/sh/drivers/pci/ops-sdk7780.c +++ b/arch/sh/drivers/pci/ops-sdk7780.c @@ -69,5 +69,5 @@ static struct sh4_pci_address_map sdk7780_pci_map = { int __init pcibios_init_platform(void) { printk(KERN_INFO "SH7780 PCI: Finished initializing PCI controller\n"); - return sh7780_pcic_init(&sdk7780_pci_map); + return sh7780_pcic_init(&board_pci_channels[0], &sdk7780_pci_map); } diff --git a/arch/sh/drivers/pci/ops-se7780.c b/arch/sh/drivers/pci/ops-se7780.c index 3145c62484d..78a6f2bc4f1 100644 --- a/arch/sh/drivers/pci/ops-se7780.c +++ b/arch/sh/drivers/pci/ops-se7780.c @@ -92,5 +92,5 @@ int __init pcibios_init_platform(void) ctrl_outw(0x0013, FPGA_PCI_INTSEL1); ctrl_outw(0xE402, FPGA_PCI_INTSEL2); - return sh7780_pcic_init(&se7780_pci_map); + return sh7780_pcic_init(&board_pci_channels[0], &se7780_pci_map); } diff --git a/arch/sh/drivers/pci/ops-sh4.c b/arch/sh/drivers/pci/ops-sh4.c index 710a3b0306e..92d27f734f2 100644 --- a/arch/sh/drivers/pci/ops-sh4.c +++ b/arch/sh/drivers/pci/ops-sh4.c @@ -34,8 +34,8 @@ static int sh4_pci_read(struct pci_bus *bus, unsigned int devfn, * so we must do byte alignment by hand */ spin_lock_irqsave(&sh4_pci_lock, flags); - pci_write_reg(CONFIG_CMD(bus, devfn, where), SH4_PCIPAR); - data = pci_read_reg(SH4_PCIPDR); + pci_write_reg(NULL, CONFIG_CMD(bus, devfn, where), SH4_PCIPAR); + data = pci_read_reg(NULL, SH4_PCIPDR); spin_unlock_irqrestore(&sh4_pci_lock, flags); switch (size) { @@ -68,8 +68,8 @@ static int sh4_pci_write(struct pci_bus *bus, unsigned int devfn, u32 data; spin_lock_irqsave(&sh4_pci_lock, flags); - pci_write_reg(CONFIG_CMD(bus, devfn, where), SH4_PCIPAR); - data = pci_read_reg(SH4_PCIPDR); + pci_write_reg(NULL, CONFIG_CMD(bus, devfn, where), SH4_PCIPAR); + data = pci_read_reg(NULL, SH4_PCIPDR); spin_unlock_irqrestore(&sh4_pci_lock, flags); switch (size) { @@ -90,7 +90,7 @@ static int sh4_pci_write(struct pci_bus *bus, unsigned int devfn, return PCIBIOS_FUNC_NOT_SUPPORTED; } - pci_write_reg(data, SH4_PCIPDR); + pci_write_reg(NULL, data, SH4_PCIPDR); return PCIBIOS_SUCCESSFUL; } @@ -106,25 +106,25 @@ struct pci_ops sh4_pci_ops = { */ static unsigned int pci_probe = PCI_PROBE_CONF1; -int __init sh4_pci_check_direct(void) +int __init sh4_pci_check_direct(struct pci_channel *chan) { /* * Check if configuration works. */ if (pci_probe & PCI_PROBE_CONF1) { - unsigned int tmp = pci_read_reg(SH4_PCIPAR); + unsigned int tmp = pci_read_reg(chan, SH4_PCIPAR); - pci_write_reg(P1SEG, SH4_PCIPAR); + pci_write_reg(chan, P1SEG, SH4_PCIPAR); - if (pci_read_reg(SH4_PCIPAR) == P1SEG) { - pci_write_reg(tmp, SH4_PCIPAR); + if (pci_read_reg(chan, SH4_PCIPAR) == P1SEG) { + pci_write_reg(chan, tmp, SH4_PCIPAR); printk(KERN_INFO "PCI: Using configuration type 1\n"); request_region(PCI_REG(SH4_PCIPAR), 8, "PCI conf1"); return 0; } - pci_write_reg(tmp, SH4_PCIPAR); + pci_write_reg(chan, tmp, SH4_PCIPAR); } pr_debug("PCI: pci_check_direct failed\n"); @@ -163,7 +163,7 @@ char * __devinit pcibios_setup(char *str) return str; } -int __attribute__((weak)) pci_fixup_pcic(void) +int __attribute__((weak)) pci_fixup_pcic(struct pci_channel *chan) { /* Nothing to do. */ return 0; diff --git a/arch/sh/drivers/pci/ops-snapgear.c b/arch/sh/drivers/pci/ops-snapgear.c index 53dd893d4e5..cba80153dde 100644 --- a/arch/sh/drivers/pci/ops-snapgear.c +++ b/arch/sh/drivers/pci/ops-snapgear.c @@ -66,7 +66,7 @@ static struct sh4_pci_address_map sh7751_pci_map = { */ int __init pcibios_init_platform(void) { - return sh7751_pcic_init(&sh7751_pci_map); + return sh7751_pcic_init(&board_pci_channels[0], &sh7751_pci_map); } int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) diff --git a/arch/sh/drivers/pci/ops-titan.c b/arch/sh/drivers/pci/ops-titan.c index a8f7801a34a..69fcc5c5d52 100644 --- a/arch/sh/drivers/pci/ops-titan.c +++ b/arch/sh/drivers/pci/ops-titan.c @@ -73,5 +73,5 @@ static struct sh4_pci_address_map sh7751_pci_map = { int __init pcibios_init_platform(void) { - return sh7751_pcic_init(&sh7751_pci_map); + return sh7751_pcic_init(&board_pci_channels[0], &sh7751_pci_map); } diff --git a/arch/sh/drivers/pci/pci-sh4.h b/arch/sh/drivers/pci/pci-sh4.h index a83dcf70c13..62ba3505608 100644 --- a/arch/sh/drivers/pci/pci-sh4.h +++ b/arch/sh/drivers/pci/pci-sh4.h @@ -154,8 +154,8 @@ /* arch/sh/kernel/drivers/pci/ops-sh4.c */ extern struct pci_ops sh4_pci_ops; -int sh4_pci_check_direct(void); -int pci_fixup_pcic(void); +int sh4_pci_check_direct(struct pci_channel *chan); +int pci_fixup_pcic(struct pci_channel *chan); struct sh4_pci_address_space { unsigned long base; @@ -168,13 +168,16 @@ struct sh4_pci_address_map { unsigned long flags; }; -static inline void pci_write_reg(unsigned long val, unsigned long reg) +static inline void pci_write_reg(struct pci_channel *chan, + unsigned long val, unsigned long reg) { ctrl_outl(val, PCI_REG(reg)); } -static inline unsigned long pci_read_reg(unsigned long reg) +static inline unsigned long pci_read_reg(struct pci_channel *chan, + unsigned long reg) { return ctrl_inl(PCI_REG(reg)); } + #endif /* __PCI_SH4_H */ diff --git a/arch/sh/drivers/pci/pci-sh7751.c b/arch/sh/drivers/pci/pci-sh7751.c index 3065eb184f0..9c2c01490d6 100644 --- a/arch/sh/drivers/pci/pci-sh7751.c +++ b/arch/sh/drivers/pci/pci-sh7751.c @@ -40,21 +40,22 @@ static int __init sh7751_pci_init(void) pr_debug("PCI: Starting intialization.\n"); /* check for SH7751/SH7751R hardware */ - id = pci_read_reg(SH7751_PCICONF0); + id = pci_read_reg(NULL, SH7751_PCICONF0); if (id != ((SH7751_DEVICE_ID << 16) | SH7751_VENDOR_ID) && id != ((SH7751R_DEVICE_ID << 16) | SH7751_VENDOR_ID)) { pr_debug("PCI: This is not an SH7751(R) (%x)\n", id); return -ENODEV; } - if ((ret = sh4_pci_check_direct()) != 0) + if ((ret = sh4_pci_check_direct(NULL)) != 0) return ret; return pcibios_init_platform(); } subsys_initcall(sh7751_pci_init); -static int __init __area_sdram_check(unsigned int area) +static int __init __area_sdram_check(struct pci_channel *chan, + unsigned int area) { u32 word; @@ -65,7 +66,7 @@ static int __init __area_sdram_check(unsigned int area) area, word); return 0; } - pci_write_reg(word, SH4_PCIBCR1); + pci_write_reg(chan, word, SH4_PCIBCR1); word = (u16)ctrl_inw(SH7751_BCR2); /* check BCR2 for 32bit SDRAM interface*/ @@ -74,12 +75,13 @@ static int __init __area_sdram_check(unsigned int area) area, word); return 0; } - pci_write_reg(word, SH4_PCIBCR2); + pci_write_reg(chan, word, SH4_PCIBCR2); return 1; } -int __init sh7751_pcic_init(struct sh4_pci_address_map *map) +int __init sh7751_pcic_init(struct pci_channel *chan, + struct sh4_pci_address_map *map) { u32 reg; u32 word; @@ -90,10 +92,10 @@ int __init sh7751_pcic_init(struct sh4_pci_address_map *map) ctrl_outl(reg, SH7751_BCR1); /* Turn the clocks back on (not done in reset)*/ - pci_write_reg(0, SH4_PCICLKR); + pci_write_reg(chan, 0, SH4_PCICLKR); /* Clear Powerdown IRQ's (not done in reset) */ word = SH4_PCIPINT_D3 | SH4_PCIPINT_D0; - pci_write_reg(word, SH4_PCIPINT); + pci_write_reg(chan, word, SH4_PCIPINT); /* * This code is unused for some boards as it is done in the @@ -103,11 +105,11 @@ int __init sh7751_pcic_init(struct sh4_pci_address_map *map) if (!(map->flags & SH4_PCIC_NO_RESET)) { /* toggle PCI reset pin */ word = SH4_PCICR_PREFIX | SH4_PCICR_PRST; - pci_write_reg(word, SH4_PCICR); + pci_write_reg(chan, word, SH4_PCICR); /* Wait for a long time... not 1 sec. but long enough */ mdelay(100); word = SH4_PCICR_PREFIX; - pci_write_reg(word, SH4_PCICR); + pci_write_reg(chan, word, SH4_PCICR); } /* set the command/status bits to: @@ -116,11 +118,11 @@ int __init sh7751_pcic_init(struct sh4_pci_address_map *map) */ word = SH7751_PCICONF1_WCC | SH7751_PCICONF1_PER | SH7751_PCICONF1_BUM | SH7751_PCICONF1_MES; - pci_write_reg(word, SH7751_PCICONF1); + pci_write_reg(chan, word, SH7751_PCICONF1); /* define this host as the host bridge */ word = PCI_BASE_CLASS_BRIDGE << 24; - pci_write_reg(word, SH7751_PCICONF2); + pci_write_reg(chan, word, SH7751_PCICONF2); /* Set IO and Mem windows to local address * Make PCI and local address the same for easy 1 to 1 mapping @@ -128,24 +130,24 @@ int __init sh7751_pcic_init(struct sh4_pci_address_map *map) * Window1 = map->window1.size @ cached area base = SDRAM */ word = map->window0.size - 1; - pci_write_reg(word, SH4_PCILSR0); + pci_write_reg(chan, word, SH4_PCILSR0); word = map->window1.size - 1; - pci_write_reg(word, SH4_PCILSR1); + pci_write_reg(chan, word, SH4_PCILSR1); /* Set the values on window 0 PCI config registers */ word = P2SEGADDR(map->window0.base); - pci_write_reg(word, SH4_PCILAR0); - pci_write_reg(word, SH7751_PCICONF5); + pci_write_reg(chan, word, SH4_PCILAR0); + pci_write_reg(chan, word, SH7751_PCICONF5); /* Set the values on window 1 PCI config registers */ word = PHYSADDR(map->window1.base); - pci_write_reg(word, SH4_PCILAR1); - pci_write_reg(word, SH7751_PCICONF6); + pci_write_reg(chan, word, SH4_PCILAR1); + pci_write_reg(chan, word, SH7751_PCICONF6); /* Set the local 16MB PCI memory space window to * the lowest PCI mapped address */ word = PCIBIOS_MIN_MEM & SH4_PCIMBR_MASK; pr_debug("PCI: Setting upper bits of Memory window to 0x%x\n", word); - pci_write_reg(word , SH4_PCIMBR); + pci_write_reg(chan, word , SH4_PCIMBR); /* Map IO space into PCI IO window * The IO window is 64K-PCIBIOS_MIN_IO in size @@ -160,19 +162,19 @@ int __init sh7751_pcic_init(struct sh4_pci_address_map *map) * correctly */ word = PCIBIOS_MIN_IO & SH4_PCIIOBR_MASK; pr_debug("PCI: Setting upper bits of IO window to 0x%x\n", word); - pci_write_reg(word, SH4_PCIIOBR); + pci_write_reg(chan, word, SH4_PCIIOBR); /* Set PCI WCRx, BCRx's, copy from BSC locations */ /* check BCR for SDRAM in specified area */ switch (map->window0.base) { - case SH7751_CS0_BASE_ADDR: word = __area_sdram_check(0); break; - case SH7751_CS1_BASE_ADDR: word = __area_sdram_check(1); break; - case SH7751_CS2_BASE_ADDR: word = __area_sdram_check(2); break; - case SH7751_CS3_BASE_ADDR: word = __area_sdram_check(3); break; - case SH7751_CS4_BASE_ADDR: word = __area_sdram_check(4); break; - case SH7751_CS5_BASE_ADDR: word = __area_sdram_check(5); break; - case SH7751_CS6_BASE_ADDR: word = __area_sdram_check(6); break; + case SH7751_CS0_BASE_ADDR: word = __area_sdram_check(chan, 0); break; + case SH7751_CS1_BASE_ADDR: word = __area_sdram_check(chan, 1); break; + case SH7751_CS2_BASE_ADDR: word = __area_sdram_check(chan, 2); break; + case SH7751_CS3_BASE_ADDR: word = __area_sdram_check(chan, 3); break; + case SH7751_CS4_BASE_ADDR: word = __area_sdram_check(chan, 4); break; + case SH7751_CS5_BASE_ADDR: word = __area_sdram_check(chan, 5); break; + case SH7751_CS6_BASE_ADDR: word = __area_sdram_check(chan, 6); break; } if (!word) @@ -180,25 +182,25 @@ int __init sh7751_pcic_init(struct sh4_pci_address_map *map) /* configure the wait control registers */ word = ctrl_inl(SH7751_WCR1); - pci_write_reg(word, SH4_PCIWCR1); + pci_write_reg(chan, word, SH4_PCIWCR1); word = ctrl_inl(SH7751_WCR2); - pci_write_reg(word, SH4_PCIWCR2); + pci_write_reg(chan, word, SH4_PCIWCR2); word = ctrl_inl(SH7751_WCR3); - pci_write_reg(word, SH4_PCIWCR3); + pci_write_reg(chan, word, SH4_PCIWCR3); word = ctrl_inl(SH7751_MCR); - pci_write_reg(word, SH4_PCIMCR); + pci_write_reg(chan, word, SH4_PCIMCR); /* NOTE: I'm ignoring the PCI error IRQs for now.. * TODO: add support for the internal error interrupts and * DMA interrupts... */ - pci_fixup_pcic(); + pci_fixup_pcic(chan); /* SH7751 init done, set central function init complete */ /* use round robin mode to stop a device starving/overruning */ word = SH4_PCICR_PREFIX | SH4_PCICR_CFIN | SH4_PCICR_ARBM; - pci_write_reg(word, SH4_PCICR); + pci_write_reg(chan, word, SH4_PCICR); return 1; } diff --git a/arch/sh/drivers/pci/pci-sh7751.h b/arch/sh/drivers/pci/pci-sh7751.h index 68e3cb5e6be..6f101e5a6c8 100644 --- a/arch/sh/drivers/pci/pci-sh7751.h +++ b/arch/sh/drivers/pci/pci-sh7751.h @@ -130,6 +130,7 @@ struct sh4_pci_address_map; /* arch/sh/drivers/pci/pci-sh7751.c */ -int sh7751_pcic_init(struct sh4_pci_address_map *map); +int sh7751_pcic_init(struct pci_channel *chan, + struct sh4_pci_address_map *map); #endif /* _PCI_SH7751_H_ */ diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c index bae6a2cf047..56f673f66cb 100644 --- a/arch/sh/drivers/pci/pci-sh7780.c +++ b/arch/sh/drivers/pci/pci-sh7780.c @@ -55,7 +55,7 @@ static int __init sh7780_pci_init(void) ctrl_outl(0x00000001, SH7780_PCI_VCR2); /* Enable PCIC */ /* check for SH7780/SH7780R hardware */ - id = pci_read_reg(SH7780_PCIVID); + id = pci_read_reg(NULL, SH7780_PCIVID); if ((id & 0xffff) == SH7780_VENDOR_ID) { switch ((id >> 16) & 0xffff) { case SH7763_DEVICE_ID: @@ -82,14 +82,15 @@ static int __init sh7780_pci_init(void) ctrl_outl(0x33333333, INTC_INTPRI); } - if ((ret = sh4_pci_check_direct()) != 0) + if ((ret = sh4_pci_check_direct(NULL)) != 0) return ret; return pcibios_init_platform(); } core_initcall(sh7780_pci_init); -int __init sh7780_pcic_init(struct sh4_pci_address_map *map) +int __init sh7780_pcic_init(struct pci_channel *chan, + struct sh4_pci_address_map *map) { u32 word; @@ -101,34 +102,34 @@ int __init sh7780_pcic_init(struct sh4_pci_address_map *map) if (!(map->flags & SH4_PCIC_NO_RESET)) { /* toggle PCI reset pin */ word = SH4_PCICR_PREFIX | SH4_PCICR_PRST; - pci_write_reg(word, SH4_PCICR); + pci_write_reg(chan, word, SH4_PCICR); /* Wait for a long time... not 1 sec. but long enough */ mdelay(100); word = SH4_PCICR_PREFIX; - pci_write_reg(word, SH4_PCICR); + pci_write_reg(chan, word, SH4_PCICR); } /* set the command/status bits to: * Wait Cycle Control + Parity Enable + Bus Master + * Mem space enable */ - pci_write_reg(0x00000046, SH7780_PCICMD); + pci_write_reg(chan, 0x00000046, SH7780_PCICMD); /* define this host as the host bridge */ word = PCI_BASE_CLASS_BRIDGE << 24; - pci_write_reg(word, SH7780_PCIRID); + pci_write_reg(chan, word, SH7780_PCIRID); /* Set IO and Mem windows to local address * Make PCI and local address the same for easy 1 to 1 mapping */ - pci_write_reg(map->window0.size - 0xfffff, SH4_PCILSR0); - pci_write_reg(map->window1.size - 0xfffff, SH4_PCILSR1); + pci_write_reg(chan, map->window0.size - 0xfffff, SH4_PCILSR0); + pci_write_reg(chan, map->window1.size - 0xfffff, SH4_PCILSR1); /* Set the values on window 0 PCI config registers */ - pci_write_reg(map->window0.base, SH4_PCILAR0); - pci_write_reg(map->window0.base, SH7780_PCIMBAR0); + pci_write_reg(chan, map->window0.base, SH4_PCILAR0); + pci_write_reg(chan, map->window0.base, SH7780_PCIMBAR0); /* Set the values on window 1 PCI config registers */ - pci_write_reg(map->window1.base, SH4_PCILAR1); - pci_write_reg(map->window1.base, SH7780_PCIMBAR1); + pci_write_reg(chan, map->window1.base, SH4_PCILAR1); + pci_write_reg(chan, map->window1.base, SH7780_PCIMBAR1); /* Map IO space into PCI IO window * The IO window is 64K-PCIBIOS_MIN_IO in size @@ -145,12 +146,12 @@ int __init sh7780_pcic_init(struct sh4_pci_address_map *map) */ /* Apply any last-minute PCIC fixups */ - pci_fixup_pcic(); + pci_fixup_pcic(chan); /* SH7780 init done, set central function init complete */ /* use round robin mode to stop a device starving/overruning */ word = SH4_PCICR_PREFIX | SH4_PCICR_CFIN | SH4_PCICR_FTO; - pci_write_reg(word, SH4_PCICR); + pci_write_reg(chan, word, SH4_PCICR); return 1; } diff --git a/arch/sh/drivers/pci/pci-sh7780.h b/arch/sh/drivers/pci/pci-sh7780.h index 93adc7119b7..d34961153d5 100644 --- a/arch/sh/drivers/pci/pci-sh7780.h +++ b/arch/sh/drivers/pci/pci-sh7780.h @@ -109,6 +109,7 @@ struct sh4_pci_address_map; /* arch/sh/drivers/pci/pci-sh7780.c */ -int sh7780_pcic_init(struct sh4_pci_address_map *map); +int sh7780_pcic_init(struct pci_channel *chan, + struct sh4_pci_address_map *map); #endif /* _PCI_SH7780_H_ */ -- cgit v1.2.3 From d0e3db40e2a1352aa2a2f425a7d4631bddc03d51 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 11 Mar 2009 15:46:14 +0900 Subject: sh: add init member to pci_channel data This patch adds an init callback to struct pci_channel and makes sure it is initialized properly. Code is added to call this init function from pcibios_init(). Return values are adjusted and a warning is is printed if init fails. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/boards/mach-dreamcast/setup.c | 6 ------ arch/sh/drivers/pci/ops-cayman.c | 2 +- arch/sh/drivers/pci/ops-dreamcast.c | 18 ++++++++---------- arch/sh/drivers/pci/ops-landisk.c | 2 +- arch/sh/drivers/pci/ops-lboxre2.c | 2 +- arch/sh/drivers/pci/ops-r7780rp.c | 2 +- arch/sh/drivers/pci/ops-rts7751r2d.c | 2 +- arch/sh/drivers/pci/ops-sdk7780.c | 2 +- arch/sh/drivers/pci/ops-se7780.c | 2 +- arch/sh/drivers/pci/ops-sh03.c | 2 +- arch/sh/drivers/pci/ops-snapgear.c | 2 +- arch/sh/drivers/pci/ops-titan.c | 2 +- arch/sh/drivers/pci/pci-sh5.c | 6 ++++++ arch/sh/drivers/pci/pci-sh5.h | 1 + arch/sh/drivers/pci/pci-sh7751.c | 11 +++++------ arch/sh/drivers/pci/pci-sh7751.h | 1 + arch/sh/drivers/pci/pci-sh7780.c | 9 ++++----- arch/sh/drivers/pci/pci-sh7780.h | 1 + arch/sh/drivers/pci/pci.c | 23 ++++++++++++++++++----- arch/sh/include/asm/pci.h | 2 ++ 20 files changed, 56 insertions(+), 42 deletions(-) diff --git a/arch/sh/boards/mach-dreamcast/setup.c b/arch/sh/boards/mach-dreamcast/setup.c index d1bee4884cd..ebe99227d4e 100644 --- a/arch/sh/boards/mach-dreamcast/setup.c +++ b/arch/sh/boards/mach-dreamcast/setup.c @@ -30,7 +30,6 @@ extern struct irq_chip systemasic_int; extern void aica_time_init(void); -extern int gapspci_init(void); extern int systemasic_irq_demux(int); static void __init dreamcast_setup(char **cmdline_p) @@ -51,11 +50,6 @@ static void __init dreamcast_setup(char **cmdline_p) handle_level_irq); board_time_init = aica_time_init; - -#ifdef CONFIG_PCI - if (gapspci_init() < 0) - printk(KERN_WARNING "GAPSPCI was not detected.\n"); -#endif } static struct sh_machine_vector mv_dreamcast __initmv = { diff --git a/arch/sh/drivers/pci/ops-cayman.c b/arch/sh/drivers/pci/ops-cayman.c index 38ef76207af..f4a5e14f7e5 100644 --- a/arch/sh/drivers/pci/ops-cayman.c +++ b/arch/sh/drivers/pci/ops-cayman.c @@ -77,7 +77,7 @@ int __init pcibios_map_platform_irq(struct pci_dev *dev, u8 slot, u8 pin) } struct pci_channel board_pci_channels[] = { - { &sh5_pci_ops, NULL, NULL, 0, 0xff }, + { sh5_pci_init, &sh5_pci_ops, NULL, NULL, 0, 0xff }, { NULL, NULL, NULL, 0, 0 }, }; EXPORT_SYMBOL(board_pci_channels); diff --git a/arch/sh/drivers/pci/ops-dreamcast.c b/arch/sh/drivers/pci/ops-dreamcast.c index f5d2a2aa6f3..f62063eb649 100644 --- a/arch/sh/drivers/pci/ops-dreamcast.c +++ b/arch/sh/drivers/pci/ops-dreamcast.c @@ -42,15 +42,6 @@ static struct resource gapspci_mem_resource = { .flags = IORESOURCE_MEM, }; -static struct pci_ops gapspci_pci_ops; - -struct pci_channel board_pci_channels[] = { - { &gapspci_pci_ops, &gapspci_io_resource, - &gapspci_mem_resource, 0, 1 }, - { 0, } -}; -EXPORT_SYMBOL(board_pci_channels); - /* * The !gapspci_config_access case really shouldn't happen, ever, unless * someone implicitly messes around with the last devfn value.. otherwise we @@ -116,7 +107,7 @@ static struct pci_ops gapspci_pci_ops = { * gapspci init */ -int __init gapspci_init(void) +static int __init gapspci_init(struct pci_channel *chan) { char idbuf[16]; int i; @@ -168,3 +159,10 @@ char * __devinit pcibios_setup(char *str) { return str; } + +struct pci_channel board_pci_channels[] = { + { gapspci_init, &gapspci_pci_ops, &gapspci_io_resource, + &gapspci_mem_resource, 0, 1 }, + { 0, } +}; +EXPORT_SYMBOL(board_pci_channels); diff --git a/arch/sh/drivers/pci/ops-landisk.c b/arch/sh/drivers/pci/ops-landisk.c index 343c072a5a7..c46911d95ec 100644 --- a/arch/sh/drivers/pci/ops-landisk.c +++ b/arch/sh/drivers/pci/ops-landisk.c @@ -30,7 +30,7 @@ static struct resource sh7751_mem_resource = { }; struct pci_channel board_pci_channels[] = { - {&sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0x3ff}, + { sh7751_pci_init, &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0x3ff}, {NULL, NULL, NULL, 0, 0}, }; diff --git a/arch/sh/drivers/pci/ops-lboxre2.c b/arch/sh/drivers/pci/ops-lboxre2.c index 8bff32a2210..f606df2195c 100644 --- a/arch/sh/drivers/pci/ops-lboxre2.c +++ b/arch/sh/drivers/pci/ops-lboxre2.c @@ -39,7 +39,7 @@ static struct resource sh7751_mem_resource = { extern struct pci_ops sh7751_pci_ops; struct pci_channel board_pci_channels[] = { - { &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff }, + { sh7751_pci_init, &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff }, { NULL, NULL, NULL, 0, 0 }, }; diff --git a/arch/sh/drivers/pci/ops-r7780rp.c b/arch/sh/drivers/pci/ops-r7780rp.c index bf32ee8b132..b51b7e4078d 100644 --- a/arch/sh/drivers/pci/ops-r7780rp.c +++ b/arch/sh/drivers/pci/ops-r7780rp.c @@ -43,7 +43,7 @@ static struct resource sh7780_mem_resource = { extern struct pci_ops sh7780_pci_ops; struct pci_channel board_pci_channels[] = { - { &sh4_pci_ops, &sh7780_io_resource, &sh7780_mem_resource, 0, 0xff }, + { sh7780_pci_init, &sh4_pci_ops, &sh7780_io_resource, &sh7780_mem_resource, 0, 0xff }, { NULL, NULL, NULL, 0, 0 }, }; EXPORT_SYMBOL(board_pci_channels); diff --git a/arch/sh/drivers/pci/ops-rts7751r2d.c b/arch/sh/drivers/pci/ops-rts7751r2d.c index e4208a69732..fe5a231b866 100644 --- a/arch/sh/drivers/pci/ops-rts7751r2d.c +++ b/arch/sh/drivers/pci/ops-rts7751r2d.c @@ -47,7 +47,7 @@ static struct resource sh7751_mem_resource = { extern struct pci_ops sh7751_pci_ops; struct pci_channel board_pci_channels[] = { - { &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff }, + { sh7751_pci_init, &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff }, { NULL, NULL, NULL, 0, 0 }, }; EXPORT_SYMBOL(board_pci_channels); diff --git a/arch/sh/drivers/pci/ops-sdk7780.c b/arch/sh/drivers/pci/ops-sdk7780.c index 21d59d4a215..7277cd15ae6 100644 --- a/arch/sh/drivers/pci/ops-sdk7780.c +++ b/arch/sh/drivers/pci/ops-sdk7780.c @@ -49,7 +49,7 @@ static struct resource sdk7780_mem_resource = { }; struct pci_channel board_pci_channels[] = { - { &sh4_pci_ops, &sdk7780_io_resource, &sdk7780_mem_resource, 0, 0xff }, + { sh7780_pci_init, &sh4_pci_ops, &sdk7780_io_resource, &sdk7780_mem_resource, 0, 0xff }, { NULL, NULL, NULL, 0, 0 }, }; EXPORT_SYMBOL(board_pci_channels); diff --git a/arch/sh/drivers/pci/ops-se7780.c b/arch/sh/drivers/pci/ops-se7780.c index 78a6f2bc4f1..76a74fb42fb 100644 --- a/arch/sh/drivers/pci/ops-se7780.c +++ b/arch/sh/drivers/pci/ops-se7780.c @@ -58,7 +58,7 @@ static struct resource se7780_mem_resource = { extern struct pci_ops se7780_pci_ops; struct pci_channel board_pci_channels[] = { - { &sh4_pci_ops, &se7780_io_resource, &se7780_mem_resource, 0, 0xff }, + { sh7780_pci_init, &sh4_pci_ops, &se7780_io_resource, &se7780_mem_resource, 0, 0xff }, { NULL, NULL, NULL, 0, 0 }, }; EXPORT_SYMBOL(board_pci_channels); diff --git a/arch/sh/drivers/pci/ops-sh03.c b/arch/sh/drivers/pci/ops-sh03.c index e1703ff5a4d..0218135f0bb 100644 --- a/arch/sh/drivers/pci/ops-sh03.c +++ b/arch/sh/drivers/pci/ops-sh03.c @@ -39,7 +39,7 @@ static struct resource sh7751_mem_resource = { extern struct pci_ops sh4_pci_ops; struct pci_channel board_pci_channels[] = { - { &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff }, + { sh7751_pci_init, &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff }, { NULL, NULL, NULL, 0, 0 }, }; diff --git a/arch/sh/drivers/pci/ops-snapgear.c b/arch/sh/drivers/pci/ops-snapgear.c index cba80153dde..2e254c6cf6c 100644 --- a/arch/sh/drivers/pci/ops-snapgear.c +++ b/arch/sh/drivers/pci/ops-snapgear.c @@ -40,7 +40,7 @@ static struct resource sh7751_mem_resource = { }; struct pci_channel board_pci_channels[] = { - { &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff }, + { sh7751_pci_init, &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff }, { 0, } }; diff --git a/arch/sh/drivers/pci/ops-titan.c b/arch/sh/drivers/pci/ops-titan.c index 69fcc5c5d52..ffa79bdf475 100644 --- a/arch/sh/drivers/pci/ops-titan.c +++ b/arch/sh/drivers/pci/ops-titan.c @@ -52,7 +52,7 @@ static struct resource sh7751_mem_resource = { }; struct pci_channel board_pci_channels[] = { - { &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff }, + { sh7751_pci_init, &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff }, { NULL, NULL, NULL, 0, 0 }, }; EXPORT_SYMBOL(board_pci_channels); diff --git a/arch/sh/drivers/pci/pci-sh5.c b/arch/sh/drivers/pci/pci-sh5.c index 7a97438762c..008a02ec0d9 100644 --- a/arch/sh/drivers/pci/pci-sh5.c +++ b/arch/sh/drivers/pci/pci-sh5.c @@ -27,6 +27,12 @@ unsigned long pcicr_virt; unsigned long PCI_IO_AREA; +int __init sh5_pci_init(struct pci_channel *chan) +{ + pr_debug("PCI: Starting intialization.\n"); + return pcibios_init_platform(); +} + /* Rounds a number UP to the nearest power of two. Used for * sizing the PCI window. */ diff --git a/arch/sh/drivers/pci/pci-sh5.h b/arch/sh/drivers/pci/pci-sh5.h index 7cff3fc04d3..af09f384c7d 100644 --- a/arch/sh/drivers/pci/pci-sh5.h +++ b/arch/sh/drivers/pci/pci-sh5.h @@ -108,6 +108,7 @@ extern unsigned long pcicr_virt; extern struct pci_ops sh5_pci_ops; /* arch/sh/drivers/pci/pci-sh5.c */ +int sh5_pci_init(struct pci_channel *chan); int sh5pci_init(unsigned long memStart, unsigned long memSize); #endif /* __PCI_SH5_H */ diff --git a/arch/sh/drivers/pci/pci-sh7751.c b/arch/sh/drivers/pci/pci-sh7751.c index 9c2c01490d6..230db8bd974 100644 --- a/arch/sh/drivers/pci/pci-sh7751.c +++ b/arch/sh/drivers/pci/pci-sh7751.c @@ -32,7 +32,7 @@ * space mapping) will be called via the platform defined function * pcibios_init_platform(). */ -static int __init sh7751_pci_init(void) +int __init sh7751_pci_init(struct pci_channel *chan) { unsigned int id; int ret; @@ -40,19 +40,18 @@ static int __init sh7751_pci_init(void) pr_debug("PCI: Starting intialization.\n"); /* check for SH7751/SH7751R hardware */ - id = pci_read_reg(NULL, SH7751_PCICONF0); + id = pci_read_reg(chan, SH7751_PCICONF0); if (id != ((SH7751_DEVICE_ID << 16) | SH7751_VENDOR_ID) && id != ((SH7751R_DEVICE_ID << 16) | SH7751_VENDOR_ID)) { pr_debug("PCI: This is not an SH7751(R) (%x)\n", id); return -ENODEV; } - if ((ret = sh4_pci_check_direct(NULL)) != 0) + if ((ret = sh4_pci_check_direct(chan)) != 0) return ret; return pcibios_init_platform(); } -subsys_initcall(sh7751_pci_init); static int __init __area_sdram_check(struct pci_channel *chan, unsigned int area) @@ -178,7 +177,7 @@ int __init sh7751_pcic_init(struct pci_channel *chan, } if (!word) - return 0; + return -1; /* configure the wait control registers */ word = ctrl_inl(SH7751_WCR1); @@ -202,5 +201,5 @@ int __init sh7751_pcic_init(struct pci_channel *chan, word = SH4_PCICR_PREFIX | SH4_PCICR_CFIN | SH4_PCICR_ARBM; pci_write_reg(chan, word, SH4_PCICR); - return 1; + return 0; } diff --git a/arch/sh/drivers/pci/pci-sh7751.h b/arch/sh/drivers/pci/pci-sh7751.h index 6f101e5a6c8..0ea4387df13 100644 --- a/arch/sh/drivers/pci/pci-sh7751.h +++ b/arch/sh/drivers/pci/pci-sh7751.h @@ -130,6 +130,7 @@ struct sh4_pci_address_map; /* arch/sh/drivers/pci/pci-sh7751.c */ +int sh7751_pci_init(struct pci_channel *chan); int sh7751_pcic_init(struct pci_channel *chan, struct sh4_pci_address_map *map); diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c index 56f673f66cb..4706e880b08 100644 --- a/arch/sh/drivers/pci/pci-sh7780.c +++ b/arch/sh/drivers/pci/pci-sh7780.c @@ -45,7 +45,7 @@ * space mapping) will be called via the platform defined function * pcibios_init_platform(). */ -static int __init sh7780_pci_init(void) +int __init sh7780_pci_init(struct pci_channel *chan) { unsigned int id; int ret, match = 0; @@ -55,7 +55,7 @@ static int __init sh7780_pci_init(void) ctrl_outl(0x00000001, SH7780_PCI_VCR2); /* Enable PCIC */ /* check for SH7780/SH7780R hardware */ - id = pci_read_reg(NULL, SH7780_PCIVID); + id = pci_read_reg(chan, SH7780_PCIVID); if ((id & 0xffff) == SH7780_VENDOR_ID) { switch ((id >> 16) & 0xffff) { case SH7763_DEVICE_ID: @@ -82,12 +82,11 @@ static int __init sh7780_pci_init(void) ctrl_outl(0x33333333, INTC_INTPRI); } - if ((ret = sh4_pci_check_direct(NULL)) != 0) + if ((ret = sh4_pci_check_direct(chan)) != 0) return ret; return pcibios_init_platform(); } -core_initcall(sh7780_pci_init); int __init sh7780_pcic_init(struct pci_channel *chan, struct sh4_pci_address_map *map) @@ -153,5 +152,5 @@ int __init sh7780_pcic_init(struct pci_channel *chan, word = SH4_PCICR_PREFIX | SH4_PCICR_CFIN | SH4_PCICR_FTO; pci_write_reg(chan, word, SH4_PCICR); - return 1; + return 0; } diff --git a/arch/sh/drivers/pci/pci-sh7780.h b/arch/sh/drivers/pci/pci-sh7780.h index d34961153d5..2f3c92065ec 100644 --- a/arch/sh/drivers/pci/pci-sh7780.h +++ b/arch/sh/drivers/pci/pci-sh7780.h @@ -109,6 +109,7 @@ struct sh4_pci_address_map; /* arch/sh/drivers/pci/pci-sh7780.c */ +int sh7780_pci_init(struct pci_channel *chan); int sh7780_pcic_init(struct pci_channel *chan, struct sh4_pci_address_map *map); diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c index 0d6ac7a1db4..29ec16e69af 100644 --- a/arch/sh/drivers/pci/pci.c +++ b/arch/sh/drivers/pci/pci.c @@ -28,18 +28,31 @@ static int __init pcibios_init(void) struct pci_bus *bus; int busno; + /* init channels */ + busno = 0; + for (p = board_pci_channels; p->init; p++) { + if (p->init(p) == 0) + p->enabled = 1; + else + pr_err("Unable to init pci channel %d\n", busno); + busno++; + } + #ifdef CONFIG_PCI_AUTO /* assign resources */ busno = 0; - for (p = board_pci_channels; p->pci_ops != NULL; p++) - busno = pciauto_assign_resources(busno, p) + 1; + for (p = board_pci_channels; p->init; p++) + if (p->enabled) + busno = pciauto_assign_resources(busno, p) + 1; #endif /* scan the buses */ busno = 0; - for (p = board_pci_channels; p->pci_ops != NULL; p++) { - bus = pci_scan_bus(busno, p->pci_ops, p); - busno = bus->subordinate + 1; + for (p = board_pci_channels; p->init; p++) { + if (p->enabled) { + bus = pci_scan_bus(busno, p->pci_ops, p); + busno = bus->subordinate + 1; + } } pci_fixup_irqs(pci_common_swizzle, pcibios_map_platform_irq); diff --git a/arch/sh/include/asm/pci.h b/arch/sh/include/asm/pci.h index df1d383e18a..5c7a8f1d2d5 100644 --- a/arch/sh/include/asm/pci.h +++ b/arch/sh/include/asm/pci.h @@ -17,11 +17,13 @@ * external) PCI controllers. */ struct pci_channel { + int (*init)(struct pci_channel *chan); struct pci_ops *pci_ops; struct resource *io_resource; struct resource *mem_resource; int first_devfn; int last_devfn; + int enabled; }; /* -- cgit v1.2.3 From 710fa3c81151948ac4d836ef52b57cef91b0ab72 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 11 Mar 2009 15:47:23 +0900 Subject: sh: avoid using PCIBIOS_MIN_xxx Replaces PCIBIOS_MIN_IO and PCIBIOS_MIN_MEM with direct struct pci_channel access. This allows us to have more than one pci channel. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/drivers/pci/fixups-r7780rp.c | 2 +- arch/sh/drivers/pci/fixups-sdk7780.c | 2 +- arch/sh/drivers/pci/fixups-se7780.c | 2 +- arch/sh/drivers/pci/pci-sh5.c | 9 ++++++--- arch/sh/drivers/pci/pci-sh7751.c | 14 ++++++-------- arch/sh/drivers/pci/pci-sh7780.c | 10 ++++------ 6 files changed, 19 insertions(+), 20 deletions(-) diff --git a/arch/sh/drivers/pci/fixups-r7780rp.c b/arch/sh/drivers/pci/fixups-r7780rp.c index 5b25021bbd6..31f8dfbfcbf 100644 --- a/arch/sh/drivers/pci/fixups-r7780rp.c +++ b/arch/sh/drivers/pci/fixups-r7780rp.c @@ -37,7 +37,7 @@ int pci_fixup_pcic(struct pci_channel *chan) #endif /* Set IOBR for windows containing area specified in pci.h */ - pci_write_reg(chan, (PCIBIOS_MIN_IO & ~(SH7780_PCI_IO_SIZE - 1)), + pci_write_reg(chan, chan->io_resource->start & ~(SH7780_PCI_IO_SIZE-1), SH7780_PCIIOBR); pci_write_reg(chan, ((SH7780_PCI_IO_SIZE-1) & (7<<18)), SH7780_PCIIOBMR); diff --git a/arch/sh/drivers/pci/fixups-sdk7780.c b/arch/sh/drivers/pci/fixups-sdk7780.c index 3f6754a120e..c2957312b30 100644 --- a/arch/sh/drivers/pci/fixups-sdk7780.c +++ b/arch/sh/drivers/pci/fixups-sdk7780.c @@ -50,7 +50,7 @@ int pci_fixup_pcic(struct pci_channel *chan) pci_write_reg(chan, 0x00FC0000 , SH7780_PCIMBMR0); /* 16M */ /* Set IOBR for window containing area specified in pci.h */ - pci_write_reg(chan, PCIBIOS_MIN_IO & ~(SH7780_PCI_IO_SIZE-1), + pci_write_reg(chan, chan->io_resource->start & ~(SH7780_PCI_IO_SIZE-1), SH7780_PCIIOBR); pci_write_reg(chan, (SH7780_PCI_IO_SIZE-1) & (7 << 18), SH7780_PCIIOBMR); diff --git a/arch/sh/drivers/pci/fixups-se7780.c b/arch/sh/drivers/pci/fixups-se7780.c index b8e735e01c3..a968af7d6f7 100644 --- a/arch/sh/drivers/pci/fixups-se7780.c +++ b/arch/sh/drivers/pci/fixups-se7780.c @@ -51,7 +51,7 @@ int pci_fixup_pcic(struct pci_channel *chan) pci_write_reg(chan, 0x00FC0000 , SH7780_PCIMBMR0); /* 16M */ /* Set IOBR for window containing area specified in pci.h */ - pci_write_reg(chan, PCIBIOS_MIN_IO & ~(SH7780_PCI_IO_SIZE-1), + pci_write_reg(chan, chan->io_resource->start & ~(SH7780_PCI_IO_SIZE-1), SH7780_PCIIOBR); pci_write_reg(chan, (SH7780_PCI_IO_SIZE-1) & (7 << 18), SH7780_PCIIOBMR); diff --git a/arch/sh/drivers/pci/pci-sh5.c b/arch/sh/drivers/pci/pci-sh5.c index 008a02ec0d9..7750da27628 100644 --- a/arch/sh/drivers/pci/pci-sh5.c +++ b/arch/sh/drivers/pci/pci-sh5.c @@ -206,6 +206,9 @@ int __init sh5pci_init(unsigned long memStart, unsigned long memSize) return 0; } +#define xPCIBIOS_MIN_IO board_pci_channels->io_resource->start +#define xPCIBIOS_MIN_MEM board_pci_channels->mem_resource->start + void __devinit pcibios_fixup_bus(struct pci_bus *bus) { struct pci_dev *dev = bus->self; @@ -223,9 +226,9 @@ void __devinit pcibios_fixup_bus(struct pci_bus *bus) /* For now, propagate host limits to the bus; * we'll adjust them later. */ bus->resource[0]->end = 64*1024 - 1 ; - bus->resource[1]->end = PCIBIOS_MIN_MEM+(256*1024*1024)-1; - bus->resource[0]->start = PCIBIOS_MIN_IO; - bus->resource[1]->start = PCIBIOS_MIN_MEM; + bus->resource[1]->end = xPCIBIOS_MIN_MEM+(256*1024*1024)-1; + bus->resource[0]->start = xPCIBIOS_MIN_IO; + bus->resource[1]->start = xPCIBIOS_MIN_MEM; /* Turn off downstream PF memory address range by default */ bus->resource[2]->start = 1024*1024; diff --git a/arch/sh/drivers/pci/pci-sh7751.c b/arch/sh/drivers/pci/pci-sh7751.c index 230db8bd974..447234c69ab 100644 --- a/arch/sh/drivers/pci/pci-sh7751.c +++ b/arch/sh/drivers/pci/pci-sh7751.c @@ -144,22 +144,20 @@ int __init sh7751_pcic_init(struct pci_channel *chan, /* Set the local 16MB PCI memory space window to * the lowest PCI mapped address */ - word = PCIBIOS_MIN_MEM & SH4_PCIMBR_MASK; + word = chan->mem_resource->start & SH4_PCIMBR_MASK; pr_debug("PCI: Setting upper bits of Memory window to 0x%x\n", word); pci_write_reg(chan, word , SH4_PCIMBR); - /* Map IO space into PCI IO window - * The IO window is 64K-PCIBIOS_MIN_IO in size - * IO addresses will be translated to the - * PCI IO window base address + /* Map IO space into PCI IO window: + * IO addresses will be translated to the PCI IO window base address */ pr_debug("PCI: Mapping IO address 0x%x - 0x%x to base 0x%x\n", - PCIBIOS_MIN_IO, (64 << 10), - SH7751_PCI_IO_BASE + PCIBIOS_MIN_IO); + chan->io_resource->start, chan->io_resource->end, + SH7751_PCI_IO_BASE + chan->io_resource->start); /* Make sure the MSB's of IO window are set to access PCI space * correctly */ - word = PCIBIOS_MIN_IO & SH4_PCIIOBR_MASK; + word = chan->io_resource->start & SH4_PCIIOBR_MASK; pr_debug("PCI: Setting upper bits of IO window to 0x%x\n", word); pci_write_reg(chan, word, SH4_PCIIOBR); diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c index 4706e880b08..e8f3a308c07 100644 --- a/arch/sh/drivers/pci/pci-sh7780.c +++ b/arch/sh/drivers/pci/pci-sh7780.c @@ -130,14 +130,12 @@ int __init sh7780_pcic_init(struct pci_channel *chan, pci_write_reg(chan, map->window1.base, SH4_PCILAR1); pci_write_reg(chan, map->window1.base, SH7780_PCIMBAR1); - /* Map IO space into PCI IO window - * The IO window is 64K-PCIBIOS_MIN_IO in size - * IO addresses will be translated to the - * PCI IO window base address + /* Map IO space into PCI IO window: + * IO addresses will be translated to the PCI IO window base address */ pr_debug("PCI: Mapping IO address 0x%x - 0x%x to base 0x%x\n", - PCIBIOS_MIN_IO, (64 << 10), - SH7780_PCI_IO_BASE + PCIBIOS_MIN_IO); + chan->io_resource->start, chan->io_resource->end, + SH7780_PCI_IO_BASE + chan->io_resource->start); /* NOTE: I'm ignoring the PCI error IRQs for now.. * TODO: add support for the internal error interrupts and -- cgit v1.2.3 From b6706ef10f75921733d7275fd45d268f2f6254c8 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 19 Feb 2008 21:34:55 +0900 Subject: sh: hook in struct pci_channel in sysdata Store a struct pci_channel pointer in bus->sysdata. This makes whatever struct pci_channel assigned to a bus available for sh4_pci_read() and sh4_pci_write(). We also modify PCIBIOS_MIN_IO and PCIBIOS_MIN_MEM to use bus->sysdata - this to gives us support for multiple pci channels. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/drivers/pci/ops-sh4.c | 12 +++++++----- arch/sh/drivers/pci/pci-auto.c | 1 + arch/sh/include/asm/pci.h | 6 ++++-- 3 files changed, 12 insertions(+), 7 deletions(-) diff --git a/arch/sh/drivers/pci/ops-sh4.c b/arch/sh/drivers/pci/ops-sh4.c index 92d27f734f2..ee62e6de713 100644 --- a/arch/sh/drivers/pci/ops-sh4.c +++ b/arch/sh/drivers/pci/ops-sh4.c @@ -26,6 +26,7 @@ static DEFINE_SPINLOCK(sh4_pci_lock); static int sh4_pci_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *val) { + struct pci_channel *chan = bus->sysdata; unsigned long flags; u32 data; @@ -34,8 +35,8 @@ static int sh4_pci_read(struct pci_bus *bus, unsigned int devfn, * so we must do byte alignment by hand */ spin_lock_irqsave(&sh4_pci_lock, flags); - pci_write_reg(NULL, CONFIG_CMD(bus, devfn, where), SH4_PCIPAR); - data = pci_read_reg(NULL, SH4_PCIPDR); + pci_write_reg(chan, CONFIG_CMD(bus, devfn, where), SH4_PCIPAR); + data = pci_read_reg(chan, SH4_PCIPDR); spin_unlock_irqrestore(&sh4_pci_lock, flags); switch (size) { @@ -63,13 +64,14 @@ static int sh4_pci_read(struct pci_bus *bus, unsigned int devfn, static int sh4_pci_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val) { + struct pci_channel *chan = bus->sysdata; unsigned long flags; int shift; u32 data; spin_lock_irqsave(&sh4_pci_lock, flags); - pci_write_reg(NULL, CONFIG_CMD(bus, devfn, where), SH4_PCIPAR); - data = pci_read_reg(NULL, SH4_PCIPDR); + pci_write_reg(chan, CONFIG_CMD(bus, devfn, where), SH4_PCIPAR); + data = pci_read_reg(chan, SH4_PCIPDR); spin_unlock_irqrestore(&sh4_pci_lock, flags); switch (size) { @@ -90,7 +92,7 @@ static int sh4_pci_write(struct pci_bus *bus, unsigned int devfn, return PCIBIOS_FUNC_NOT_SUPPORTED; } - pci_write_reg(NULL, data, SH4_PCIPDR); + pci_write_reg(chan, data, SH4_PCIPDR); return PCIBIOS_SUCCESSFUL; } diff --git a/arch/sh/drivers/pci/pci-auto.c b/arch/sh/drivers/pci/pci-auto.c index cf48b12ee58..1d715ec405b 100644 --- a/arch/sh/drivers/pci/pci-auto.c +++ b/arch/sh/drivers/pci/pci-auto.c @@ -67,6 +67,7 @@ static struct pci_dev *fake_pci_dev(struct pci_channel *hose, dev.devfn = devfn; bus.number = busnr; bus.ops = hose->pci_ops; + bus.sysdata = hose; if(busnr != top_bus) /* Fake a parent bus structure. */ diff --git a/arch/sh/include/asm/pci.h b/arch/sh/include/asm/pci.h index 5c7a8f1d2d5..386587e0883 100644 --- a/arch/sh/include/asm/pci.h +++ b/arch/sh/include/asm/pci.h @@ -31,8 +31,10 @@ struct pci_channel { */ extern struct pci_channel board_pci_channels[]; -#define PCIBIOS_MIN_IO board_pci_channels->io_resource->start -#define PCIBIOS_MIN_MEM board_pci_channels->mem_resource->start +/* ugly as hell, but makes drivers/pci/setup-res.c compile and work */ +#define __PCI_CHAN(bus) ((struct pci_channel *)bus->sysdata) +#define PCIBIOS_MIN_IO __PCI_CHAN(bus)->io_resource->start +#define PCIBIOS_MIN_MEM __PCI_CHAN(bus)->mem_resource->start /* * I/O routine helpers -- cgit v1.2.3 From e4c6a3604e07185046e2ce4be82a201f4447d788 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 19 Feb 2008 21:35:04 +0900 Subject: sh: add reg_base member to pci_channel Store the base address of the pci host controller registers in struct pci_channel and use the address in pci_read_reg() and pci_write_reg(). Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/drivers/pci/ops-sh4.c | 4 ++-- arch/sh/drivers/pci/pci-sh4.h | 4 ++-- arch/sh/drivers/pci/pci-sh7751.c | 2 ++ arch/sh/drivers/pci/pci-sh7751.h | 1 - arch/sh/drivers/pci/pci-sh7780.c | 2 ++ arch/sh/drivers/pci/pci-sh7780.h | 1 - arch/sh/include/asm/pci.h | 1 + 7 files changed, 9 insertions(+), 6 deletions(-) diff --git a/arch/sh/drivers/pci/ops-sh4.c b/arch/sh/drivers/pci/ops-sh4.c index ee62e6de713..540683d07c7 100644 --- a/arch/sh/drivers/pci/ops-sh4.c +++ b/arch/sh/drivers/pci/ops-sh4.c @@ -121,8 +121,8 @@ int __init sh4_pci_check_direct(struct pci_channel *chan) if (pci_read_reg(chan, SH4_PCIPAR) == P1SEG) { pci_write_reg(chan, tmp, SH4_PCIPAR); printk(KERN_INFO "PCI: Using configuration type 1\n"); - request_region(PCI_REG(SH4_PCIPAR), 8, "PCI conf1"); - + request_region(chan->reg_base + SH4_PCIPAR, 8, + "PCI conf1"); return 0; } diff --git a/arch/sh/drivers/pci/pci-sh4.h b/arch/sh/drivers/pci/pci-sh4.h index 62ba3505608..90abfe3d39b 100644 --- a/arch/sh/drivers/pci/pci-sh4.h +++ b/arch/sh/drivers/pci/pci-sh4.h @@ -171,13 +171,13 @@ struct sh4_pci_address_map { static inline void pci_write_reg(struct pci_channel *chan, unsigned long val, unsigned long reg) { - ctrl_outl(val, PCI_REG(reg)); + ctrl_outl(val, chan->reg_base + reg); } static inline unsigned long pci_read_reg(struct pci_channel *chan, unsigned long reg) { - return ctrl_inl(PCI_REG(reg)); + return ctrl_inl(chan->reg_base + reg); } #endif /* __PCI_SH4_H */ diff --git a/arch/sh/drivers/pci/pci-sh7751.c b/arch/sh/drivers/pci/pci-sh7751.c index 447234c69ab..201266b020f 100644 --- a/arch/sh/drivers/pci/pci-sh7751.c +++ b/arch/sh/drivers/pci/pci-sh7751.c @@ -39,6 +39,8 @@ int __init sh7751_pci_init(struct pci_channel *chan) pr_debug("PCI: Starting intialization.\n"); + chan->reg_base = 0xfe200000; + /* check for SH7751/SH7751R hardware */ id = pci_read_reg(chan, SH7751_PCICONF0); if (id != ((SH7751_DEVICE_ID << 16) | SH7751_VENDOR_ID) && diff --git a/arch/sh/drivers/pci/pci-sh7751.h b/arch/sh/drivers/pci/pci-sh7751.h index 0ea4387df13..c390dd2f5e1 100644 --- a/arch/sh/drivers/pci/pci-sh7751.h +++ b/arch/sh/drivers/pci/pci-sh7751.h @@ -26,7 +26,6 @@ #define SH7751_PCI_IO_SIZE 0x40000 /* Size of IO window */ #define SH7751_PCIREG_BASE 0xFE200000 /* PCI regs base address */ -#define PCI_REG(n) (SH7751_PCIREG_BASE+ n) #define SH7751_PCICONF0 0x0 /* PCI Config Reg 0 */ #define SH7751_PCICONF0_DEVID 0xFFFF0000 /* Device ID */ diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c index e8f3a308c07..9d6483a26cf 100644 --- a/arch/sh/drivers/pci/pci-sh7780.c +++ b/arch/sh/drivers/pci/pci-sh7780.c @@ -52,6 +52,8 @@ int __init sh7780_pci_init(struct pci_channel *chan) pr_debug("PCI: Starting intialization.\n"); + chan->reg_base = 0xfe040000; + ctrl_outl(0x00000001, SH7780_PCI_VCR2); /* Enable PCIC */ /* check for SH7780/SH7780R hardware */ diff --git a/arch/sh/drivers/pci/pci-sh7780.h b/arch/sh/drivers/pci/pci-sh7780.h index 2f3c92065ec..fffcf1dcfed 100644 --- a/arch/sh/drivers/pci/pci-sh7780.h +++ b/arch/sh/drivers/pci/pci-sh7780.h @@ -35,7 +35,6 @@ #define SH7780_PCI_IO_SIZE 0x00400000 /* Size of IO window */ #define SH7780_PCIREG_BASE 0xFE040000 /* PCI regs base address */ -#define PCI_REG(n) (SH7780_PCIREG_BASE+n) /* SH7780 PCI Config Registers */ #define SH7780_PCIVID 0x000 /* Vendor ID */ diff --git a/arch/sh/include/asm/pci.h b/arch/sh/include/asm/pci.h index 386587e0883..8e9e0edcf36 100644 --- a/arch/sh/include/asm/pci.h +++ b/arch/sh/include/asm/pci.h @@ -24,6 +24,7 @@ struct pci_channel { int first_devfn; int last_devfn; int enabled; + unsigned long reg_base; }; /* -- cgit v1.2.3 From ef53fdeb7e0cb139aff33665635b886700137abb Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 19 Feb 2008 21:35:14 +0900 Subject: sh: add io_base member to pci_channel Store the io window base address in struct pci_channel and use that one instead of SH77xx_PCI_IO_BASE. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/drivers/pci/pci-sh7751.c | 5 +++-- arch/sh/drivers/pci/pci-sh7780.c | 5 +++-- arch/sh/include/asm/pci.h | 1 + 3 files changed, 7 insertions(+), 4 deletions(-) diff --git a/arch/sh/drivers/pci/pci-sh7751.c b/arch/sh/drivers/pci/pci-sh7751.c index 201266b020f..2a6c7aab2d7 100644 --- a/arch/sh/drivers/pci/pci-sh7751.c +++ b/arch/sh/drivers/pci/pci-sh7751.c @@ -40,6 +40,7 @@ int __init sh7751_pci_init(struct pci_channel *chan) pr_debug("PCI: Starting intialization.\n"); chan->reg_base = 0xfe200000; + chan->io_base = 0xfe240000; /* check for SH7751/SH7751R hardware */ id = pci_read_reg(chan, SH7751_PCICONF0); @@ -153,9 +154,9 @@ int __init sh7751_pcic_init(struct pci_channel *chan, /* Map IO space into PCI IO window: * IO addresses will be translated to the PCI IO window base address */ - pr_debug("PCI: Mapping IO address 0x%x - 0x%x to base 0x%x\n", + pr_debug("PCI: Mapping IO address 0x%x - 0x%x to base 0x%lx\n", chan->io_resource->start, chan->io_resource->end, - SH7751_PCI_IO_BASE + chan->io_resource->start); + chan->io_base + chan->io_resource->start); /* Make sure the MSB's of IO window are set to access PCI space * correctly */ diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c index 9d6483a26cf..87a7f3b7a38 100644 --- a/arch/sh/drivers/pci/pci-sh7780.c +++ b/arch/sh/drivers/pci/pci-sh7780.c @@ -53,6 +53,7 @@ int __init sh7780_pci_init(struct pci_channel *chan) pr_debug("PCI: Starting intialization.\n"); chan->reg_base = 0xfe040000; + chan->io_base = 0xfe200000; ctrl_outl(0x00000001, SH7780_PCI_VCR2); /* Enable PCIC */ @@ -135,9 +136,9 @@ int __init sh7780_pcic_init(struct pci_channel *chan, /* Map IO space into PCI IO window: * IO addresses will be translated to the PCI IO window base address */ - pr_debug("PCI: Mapping IO address 0x%x - 0x%x to base 0x%x\n", + pr_debug("PCI: Mapping IO address 0x%x - 0x%x to base 0x%lx\n", chan->io_resource->start, chan->io_resource->end, - SH7780_PCI_IO_BASE + chan->io_resource->start); + chan->io_base + chan->io_resource->start); /* NOTE: I'm ignoring the PCI error IRQs for now.. * TODO: add support for the internal error interrupts and diff --git a/arch/sh/include/asm/pci.h b/arch/sh/include/asm/pci.h index 8e9e0edcf36..84d12ebef08 100644 --- a/arch/sh/include/asm/pci.h +++ b/arch/sh/include/asm/pci.h @@ -25,6 +25,7 @@ struct pci_channel { int last_devfn; int enabled; unsigned long reg_base; + unsigned long io_base; }; /* -- cgit v1.2.3 From ef339f241b08a16af58897e6288ba200e0c7a8c7 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 19 Feb 2008 21:35:22 +0900 Subject: sh: pci memory range checking code This patch changes the code to use __is_pci_memory() instead of is_pci_memaddr(). __is_pci_memory() loops through all the pci channels on the system to match memory windows. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/boards/mach-titan/io.c | 2 +- arch/sh/drivers/pci/pci.c | 5 ++--- arch/sh/include/asm/pci.h | 23 +++++++++++++++++++---- arch/sh/mm/ioremap_32.c | 4 ++-- 4 files changed, 24 insertions(+), 10 deletions(-) diff --git a/arch/sh/boards/mach-titan/io.c b/arch/sh/boards/mach-titan/io.c index 4badad4c6f3..053b3ed2ed8 100644 --- a/arch/sh/boards/mach-titan/io.c +++ b/arch/sh/boards/mach-titan/io.c @@ -117,7 +117,7 @@ void titan_outsl(unsigned long port, const void *src, unsigned long count) void __iomem *titan_ioport_map(unsigned long port, unsigned int size) { - if (PXSEG(port) || is_pci_memaddr(port)) + if (PXSEG(port)) return (void __iomem *)port; else if (is_pci_ioaddr(port)) return (void __iomem *)pci_ioaddr(port); diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c index 29ec16e69af..b9aca547804 100644 --- a/arch/sh/drivers/pci/pci.c +++ b/arch/sh/drivers/pci/pci.c @@ -167,9 +167,8 @@ void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen) /* * Presently the IORESOURCE_MEM case is a bit special, most * SH7751 style PCI controllers have PCI memory at a fixed - * location in the address space where no remapping is desired - * (typically at 0xfd000000, but is_pci_memaddr() will know - * best). With the IORESOURCE_MEM case more care has to be taken + * location in the address space where no remapping is desired. + * With the IORESOURCE_MEM case more care has to be taken * to inhibit page table mapping for legacy cores, but this is * punted off to __ioremap(). * -- PFM. diff --git a/arch/sh/include/asm/pci.h b/arch/sh/include/asm/pci.h index 84d12ebef08..ccf5c5ff62f 100644 --- a/arch/sh/include/asm/pci.h +++ b/arch/sh/include/asm/pci.h @@ -61,12 +61,8 @@ extern unsigned long PCI_IO_AREA; #define is_pci_ioaddr(port) \ (((port) >= PCIBIOS_MIN_IO) && \ ((port) < (PCIBIOS_MIN_IO + PCI_IO_SIZE))) -#define is_pci_memaddr(port) \ - (((port) >= PCIBIOS_MIN_MEM) && \ - ((port) < (PCIBIOS_MIN_MEM + PCI_MEM_SIZE))) #else #define is_pci_ioaddr(port) (0) -#define is_pci_memaddr(port) (0) #endif struct pci_dev; @@ -127,6 +123,25 @@ static inline void pci_dma_burst_advice(struct pci_dev *pdev, *strat = PCI_DMA_BURST_INFINITY; *strategy_parameter = ~0UL; } + +static inline int __is_pci_memory(unsigned long phys_addr, unsigned long size) +{ + struct pci_channel *p; + struct resource *res; + + for (p = board_pci_channels; p->init; p++) { + res = p->mem_resource; + if (p->enabled && (phys_addr >= res->start) && + (phys_addr + size) <= (res->end + 1)) + return 1; + } + return 0; +} +#else +static inline int __is_pci_memory(unsigned long phys_addr, unsigned long size) +{ + return 0; +} #endif /* Board-specific fixup routines. */ diff --git a/arch/sh/mm/ioremap_32.c b/arch/sh/mm/ioremap_32.c index 60cc486d2c2..7e04cc8f3b9 100644 --- a/arch/sh/mm/ioremap_32.c +++ b/arch/sh/mm/ioremap_32.c @@ -56,7 +56,7 @@ void __iomem *__ioremap(unsigned long phys_addr, unsigned long size, * P1/P2 space, ioremap() will already do the right thing, * and we'll never get this far. */ - if (is_pci_memaddr(phys_addr) && is_pci_memaddr(last_addr)) + if (__is_pci_memory(phys_addr, size)) return (void __iomem *)phys_addr; #if !defined(CONFIG_PMB_FIXED) @@ -121,7 +121,7 @@ void __iounmap(void __iomem *addr) unsigned long seg = PXSEG(vaddr); struct vm_struct *p; - if (seg < P3SEG || vaddr >= P3_ADDR_MAX || is_pci_memaddr(vaddr)) + if (seg < P3SEG || vaddr >= P3_ADDR_MAX || __is_pci_memory(vaddr, 0)) return; #ifdef CONFIG_PMB -- cgit v1.2.3 From 8ce0143b11cdc519b8e1fd94a262b654ef0bc3ab Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 19 Feb 2008 21:35:31 +0900 Subject: sh: pci io port base address code Adds a __get_pci_io_base() function which is used to match a port range against struct pci_channel. This allows us to detect if a port range is assigned to pci or happens to be legacy port io. While at it, remove unused cpu-specific cruft. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/drivers/pci/ops-rts7751r2d.c | 1 - arch/sh/include/asm/pci.h | 47 +++++++++++++++--------------------- arch/sh/kernel/io.c | 5 ++++ 3 files changed, 25 insertions(+), 28 deletions(-) diff --git a/arch/sh/drivers/pci/ops-rts7751r2d.c b/arch/sh/drivers/pci/ops-rts7751r2d.c index fe5a231b866..58ed1d58cff 100644 --- a/arch/sh/drivers/pci/ops-rts7751r2d.c +++ b/arch/sh/drivers/pci/ops-rts7751r2d.c @@ -68,7 +68,6 @@ static struct sh4_pci_address_map sh7751_pci_map = { int __init pcibios_init_platform(void) { - __set_io_port_base(SH7751_PCI_IO_BASE); return sh7751_pcic_init(&board_pci_channels[0], &sh7751_pci_map); } diff --git a/arch/sh/include/asm/pci.h b/arch/sh/include/asm/pci.h index ccf5c5ff62f..bb2c2fcddc9 100644 --- a/arch/sh/include/asm/pci.h +++ b/arch/sh/include/asm/pci.h @@ -38,33 +38,6 @@ extern struct pci_channel board_pci_channels[]; #define PCIBIOS_MIN_IO __PCI_CHAN(bus)->io_resource->start #define PCIBIOS_MIN_MEM __PCI_CHAN(bus)->mem_resource->start -/* - * I/O routine helpers - */ -#if defined(CONFIG_CPU_SUBTYPE_SH7780) || defined(CONFIG_CPU_SUBTYPE_SH7785) -#define PCI_IO_AREA 0xFE400000 -#define PCI_IO_SIZE 0x00400000 -#elif defined(CONFIG_CPU_SH5) -extern unsigned long PCI_IO_AREA; -#define PCI_IO_SIZE 0x00010000 -#else -#define PCI_IO_AREA 0xFE240000 -#define PCI_IO_SIZE 0x00040000 -#endif - -#define PCI_MEM_SIZE 0x01000000 - -#define SH4_PCIIOBR_MASK 0xFFFC0000 -#define pci_ioaddr(addr) (PCI_IO_AREA + (addr & ~SH4_PCIIOBR_MASK)) - -#if defined(CONFIG_PCI) -#define is_pci_ioaddr(port) \ - (((port) >= PCIBIOS_MIN_IO) && \ - ((port) < (PCIBIOS_MIN_IO + PCI_IO_SIZE))) -#else -#define is_pci_ioaddr(port) (0) -#endif - struct pci_dev; extern void pcibios_set_master(struct pci_dev *dev); @@ -137,11 +110,31 @@ static inline int __is_pci_memory(unsigned long phys_addr, unsigned long size) } return 0; } + +static inline void __iomem *__get_pci_io_base(unsigned long port, + unsigned long size) +{ + struct pci_channel *p; + struct resource *res; + + for (p = board_pci_channels; p->init; p++) { + res = p->io_resource; + if (p->enabled && (port >= res->start) && + (port + size) <= (res->end + 1)) + return (void __iomem *)(p->io_base + port); + } + return NULL; +} #else static inline int __is_pci_memory(unsigned long phys_addr, unsigned long size) { return 0; } +static inline void __iomem *__get_pci_io_base(unsigned long port, + unsigned long size) +{ + return NULL; +} #endif /* Board-specific fixup routines. */ diff --git a/arch/sh/kernel/io.c b/arch/sh/kernel/io.c index 29cf4588fc0..59fb020718a 100644 --- a/arch/sh/kernel/io.c +++ b/arch/sh/kernel/io.c @@ -12,6 +12,7 @@ * for more details. */ #include +#include #include #include @@ -69,6 +70,10 @@ void __iomem *ioport_map(unsigned long port, unsigned int nr) if (ret) return ret; + ret = __get_pci_io_base(port, nr); + if (ret) + return ret; + return __ioport_map(port, nr); } EXPORT_SYMBOL(ioport_map); -- cgit v1.2.3 From aa5d3ff99cc1f3dfe262ab9dd9179131fcfe39fd Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 19 Feb 2008 21:35:40 +0900 Subject: sh: export board_pci_channels in one place Instead of sometimes exporting board_pci_channels[] in the board specific code just export it in one place. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/drivers/pci/ops-cayman.c | 1 - arch/sh/drivers/pci/ops-lboxre2.c | 2 -- arch/sh/drivers/pci/ops-r7780rp.c | 1 - arch/sh/drivers/pci/ops-rts7751r2d.c | 1 - arch/sh/drivers/pci/ops-sdk7780.c | 1 - arch/sh/drivers/pci/ops-se7780.c | 1 - arch/sh/drivers/pci/ops-titan.c | 1 - arch/sh/drivers/pci/pci.c | 2 ++ 8 files changed, 2 insertions(+), 8 deletions(-) diff --git a/arch/sh/drivers/pci/ops-cayman.c b/arch/sh/drivers/pci/ops-cayman.c index f4a5e14f7e5..cbaaf0234b7 100644 --- a/arch/sh/drivers/pci/ops-cayman.c +++ b/arch/sh/drivers/pci/ops-cayman.c @@ -80,7 +80,6 @@ struct pci_channel board_pci_channels[] = { { sh5_pci_init, &sh5_pci_ops, NULL, NULL, 0, 0xff }, { NULL, NULL, NULL, 0, 0 }, }; -EXPORT_SYMBOL(board_pci_channels); int __init pcibios_init_platform(void) { diff --git a/arch/sh/drivers/pci/ops-lboxre2.c b/arch/sh/drivers/pci/ops-lboxre2.c index f606df2195c..781496bfb1f 100644 --- a/arch/sh/drivers/pci/ops-lboxre2.c +++ b/arch/sh/drivers/pci/ops-lboxre2.c @@ -43,8 +43,6 @@ struct pci_channel board_pci_channels[] = { { NULL, NULL, NULL, 0, 0 }, }; -EXPORT_SYMBOL(board_pci_channels); - static struct sh4_pci_address_map sh7751_pci_map = { .window0 = { .base = SH7751_CS3_BASE_ADDR, diff --git a/arch/sh/drivers/pci/ops-r7780rp.c b/arch/sh/drivers/pci/ops-r7780rp.c index b51b7e4078d..c58f1cff9fb 100644 --- a/arch/sh/drivers/pci/ops-r7780rp.c +++ b/arch/sh/drivers/pci/ops-r7780rp.c @@ -46,7 +46,6 @@ struct pci_channel board_pci_channels[] = { { sh7780_pci_init, &sh4_pci_ops, &sh7780_io_resource, &sh7780_mem_resource, 0, 0xff }, { NULL, NULL, NULL, 0, 0 }, }; -EXPORT_SYMBOL(board_pci_channels); static struct sh4_pci_address_map sh7780_pci_map = { .window0 = { diff --git a/arch/sh/drivers/pci/ops-rts7751r2d.c b/arch/sh/drivers/pci/ops-rts7751r2d.c index 58ed1d58cff..d374cd37f45 100644 --- a/arch/sh/drivers/pci/ops-rts7751r2d.c +++ b/arch/sh/drivers/pci/ops-rts7751r2d.c @@ -50,7 +50,6 @@ struct pci_channel board_pci_channels[] = { { sh7751_pci_init, &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff }, { NULL, NULL, NULL, 0, 0 }, }; -EXPORT_SYMBOL(board_pci_channels); static struct sh4_pci_address_map sh7751_pci_map = { .window0 = { diff --git a/arch/sh/drivers/pci/ops-sdk7780.c b/arch/sh/drivers/pci/ops-sdk7780.c index 7277cd15ae6..b34fbc54a7c 100644 --- a/arch/sh/drivers/pci/ops-sdk7780.c +++ b/arch/sh/drivers/pci/ops-sdk7780.c @@ -52,7 +52,6 @@ struct pci_channel board_pci_channels[] = { { sh7780_pci_init, &sh4_pci_ops, &sdk7780_io_resource, &sdk7780_mem_resource, 0, 0xff }, { NULL, NULL, NULL, 0, 0 }, }; -EXPORT_SYMBOL(board_pci_channels); static struct sh4_pci_address_map sdk7780_pci_map = { .window0 = { diff --git a/arch/sh/drivers/pci/ops-se7780.c b/arch/sh/drivers/pci/ops-se7780.c index 76a74fb42fb..47302077a0c 100644 --- a/arch/sh/drivers/pci/ops-se7780.c +++ b/arch/sh/drivers/pci/ops-se7780.c @@ -61,7 +61,6 @@ struct pci_channel board_pci_channels[] = { { sh7780_pci_init, &sh4_pci_ops, &se7780_io_resource, &se7780_mem_resource, 0, 0xff }, { NULL, NULL, NULL, 0, 0 }, }; -EXPORT_SYMBOL(board_pci_channels); static struct sh4_pci_address_map se7780_pci_map = { .window0 = { diff --git a/arch/sh/drivers/pci/ops-titan.c b/arch/sh/drivers/pci/ops-titan.c index ffa79bdf475..31ed03716a2 100644 --- a/arch/sh/drivers/pci/ops-titan.c +++ b/arch/sh/drivers/pci/ops-titan.c @@ -55,7 +55,6 @@ struct pci_channel board_pci_channels[] = { { sh7751_pci_init, &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff }, { NULL, NULL, NULL, 0, 0 }, }; -EXPORT_SYMBOL(board_pci_channels); static struct sh4_pci_address_map sh7751_pci_map = { .window0 = { diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c index b9aca547804..8aaacc99b71 100644 --- a/arch/sh/drivers/pci/pci.c +++ b/arch/sh/drivers/pci/pci.c @@ -187,3 +187,5 @@ void pci_iounmap(struct pci_dev *dev, void __iomem *addr) iounmap(addr); } EXPORT_SYMBOL(pci_iounmap); + +EXPORT_SYMBOL(board_pci_channels); -- cgit v1.2.3 From 10591578c84825a320734e59272f161385edcc41 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 11 Mar 2009 15:58:04 +0900 Subject: sh: drop duplicate symbol export on dreamcast and sh7785lcr. With board_pci_channels now being exported in a single place, update the boards that duplicated the export. Signed-off-by: Paul Mundt --- arch/sh/drivers/pci/ops-dreamcast.c | 1 - arch/sh/drivers/pci/ops-sh7785lcr.c | 1 - 2 files changed, 2 deletions(-) diff --git a/arch/sh/drivers/pci/ops-dreamcast.c b/arch/sh/drivers/pci/ops-dreamcast.c index f62063eb649..5bc81d5b660 100644 --- a/arch/sh/drivers/pci/ops-dreamcast.c +++ b/arch/sh/drivers/pci/ops-dreamcast.c @@ -165,4 +165,3 @@ struct pci_channel board_pci_channels[] = { &gapspci_mem_resource, 0, 1 }, { 0, } }; -EXPORT_SYMBOL(board_pci_channels); diff --git a/arch/sh/drivers/pci/ops-sh7785lcr.c b/arch/sh/drivers/pci/ops-sh7785lcr.c index fb0869f0bef..2a9f9a599d6 100644 --- a/arch/sh/drivers/pci/ops-sh7785lcr.c +++ b/arch/sh/drivers/pci/ops-sh7785lcr.c @@ -44,7 +44,6 @@ struct pci_channel board_pci_channels[] = { { &sh4_pci_ops, &sh7785_io_resource, &sh7785_mem_resource, 0, 0xff }, { NULL, NULL, NULL, 0, 0 }, }; -EXPORT_SYMBOL(board_pci_channels); static struct sh4_pci_address_map sh7785_pci_map = { .window0 = { -- cgit v1.2.3 From 3aabce8d3d2f9af2c08c2f590ac9acb272ca8c95 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 11 Mar 2009 16:12:39 +0900 Subject: sh: sh7785lcr: Update for recent PCI changes. Signed-off-by: Paul Mundt --- arch/sh/drivers/pci/fixups-sh7785lcr.c | 33 +++++++++++++++++---------------- arch/sh/drivers/pci/ops-sh7785lcr.c | 4 ++-- 2 files changed, 19 insertions(+), 18 deletions(-) diff --git a/arch/sh/drivers/pci/fixups-sh7785lcr.c b/arch/sh/drivers/pci/fixups-sh7785lcr.c index 4949e601387..9e7dc79037e 100644 --- a/arch/sh/drivers/pci/fixups-sh7785lcr.c +++ b/arch/sh/drivers/pci/fixups-sh7785lcr.c @@ -15,32 +15,33 @@ #include #include "pci-sh4.h" -int pci_fixup_pcic(void) +int pci_fixup_pcic(struct pci_channel *chan) { - pci_write_reg(0x000043ff, SH4_PCIINTM); - pci_write_reg(0x0000380f, SH4_PCIAINTM); + pci_write_reg(chan, 0x000043ff, SH4_PCIINTM); + pci_write_reg(chan, 0x0000380f, SH4_PCIAINTM); - pci_write_reg(0xfbb00047, SH7780_PCICMD); - pci_write_reg(0x00000000, SH7780_PCIIBAR); + pci_write_reg(chan, 0xfbb00047, SH7780_PCICMD); + pci_write_reg(chan, 0x00000000, SH7780_PCIIBAR); - pci_write_reg(0x00011912, SH7780_PCISVID); - pci_write_reg(0x08000000, SH7780_PCICSCR0); - pci_write_reg(0x0000001b, SH7780_PCICSAR0); - pci_write_reg(0xfd000000, SH7780_PCICSCR1); - pci_write_reg(0x0000000f, SH7780_PCICSAR1); + pci_write_reg(chan, 0x00011912, SH7780_PCISVID); + pci_write_reg(chan, 0x08000000, SH7780_PCICSCR0); + pci_write_reg(chan, 0x0000001b, SH7780_PCICSAR0); + pci_write_reg(chan, 0xfd000000, SH7780_PCICSCR1); + pci_write_reg(chan, 0x0000000f, SH7780_PCICSAR1); - pci_write_reg(0xfd000000, SH7780_PCIMBR0); - pci_write_reg(0x00fc0000, SH7780_PCIMBMR0); + pci_write_reg(chan, 0xfd000000, SH7780_PCIMBR0); + pci_write_reg(chan, 0x00fc0000, SH7780_PCIMBMR0); #ifdef CONFIG_32BIT - pci_write_reg(0xc0000000, SH7780_PCIMBR2); - pci_write_reg(0x20000000 - SH7780_PCI_IO_SIZE, SH7780_PCIMBMR2); + pci_write_reg(chan, 0xc0000000, SH7780_PCIMBR2); + pci_write_reg(chan, 0x20000000 - SH7780_PCI_IO_SIZE, SH7780_PCIMBMR2); #endif /* Set IOBR for windows containing area specified in pci.h */ - pci_write_reg((PCIBIOS_MIN_IO & ~(SH7780_PCI_IO_SIZE - 1)), + pci_write_reg(chan, chan->io_resource->start & ~(SH7780_PCI_IO_SIZE - 1), SH7780_PCIIOBR); - pci_write_reg(((SH7780_PCI_IO_SIZE - 1) & (7 << 18)), SH7780_PCIIOBMR); + pci_write_reg(chan, ((SH7780_PCI_IO_SIZE - 1) & (7 << 18)), + SH7780_PCIIOBMR); return 0; } diff --git a/arch/sh/drivers/pci/ops-sh7785lcr.c b/arch/sh/drivers/pci/ops-sh7785lcr.c index 2a9f9a599d6..afbb9bd4751 100644 --- a/arch/sh/drivers/pci/ops-sh7785lcr.c +++ b/arch/sh/drivers/pci/ops-sh7785lcr.c @@ -41,7 +41,7 @@ static struct resource sh7785_mem_resource = { }; struct pci_channel board_pci_channels[] = { - { &sh4_pci_ops, &sh7785_io_resource, &sh7785_mem_resource, 0, 0xff }, + { sh7780_pci_init, &sh4_pci_ops, &sh7785_io_resource, &sh7785_mem_resource, 0, 0xff }, { NULL, NULL, NULL, 0, 0 }, }; @@ -61,5 +61,5 @@ static struct sh4_pci_address_map sh7785_pci_map = { int __init pcibios_init_platform(void) { - return sh7780_pcic_init(&sh7785_pci_map); + return sh7780_pcic_init(&board_pci_channels[0], &sh7785_pci_map); } -- cgit v1.2.3 From f1a9ba8f15f89f3f444985251efaf809cd16da53 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 11 Mar 2009 16:17:53 +0900 Subject: sh: pci: drop duplicate PCIC fixups for SE7780 and SH7785LCR. SE7780 has the same PCIC fixup as SDK7780, and SH7785LCR the same as R7780RP. Switch to using those, and drop the duplicate code. Signed-off-by: Paul Mundt --- arch/sh/drivers/pci/Makefile | 4 +-- arch/sh/drivers/pci/fixups-se7780.c | 62 ---------------------------------- arch/sh/drivers/pci/fixups-sh7785lcr.c | 47 -------------------------- 3 files changed, 2 insertions(+), 111 deletions(-) delete mode 100644 arch/sh/drivers/pci/fixups-se7780.c delete mode 100644 arch/sh/drivers/pci/fixups-sh7785lcr.c diff --git a/arch/sh/drivers/pci/Makefile b/arch/sh/drivers/pci/Makefile index 847e90894d1..67d710a04de 100644 --- a/arch/sh/drivers/pci/Makefile +++ b/arch/sh/drivers/pci/Makefile @@ -21,6 +21,6 @@ obj-$(CONFIG_SH_SDK7780) += ops-sdk7780.o fixups-sdk7780.o obj-$(CONFIG_SH_TITAN) += ops-titan.o obj-$(CONFIG_SH_LANDISK) += ops-landisk.o obj-$(CONFIG_SH_LBOX_RE2) += ops-lboxre2.o fixups-lboxre2.o -obj-$(CONFIG_SH_7780_SOLUTION_ENGINE) += ops-se7780.o fixups-se7780.o +obj-$(CONFIG_SH_7780_SOLUTION_ENGINE) += ops-se7780.o fixups-sdk7780.o obj-$(CONFIG_SH_CAYMAN) += ops-cayman.o -obj-$(CONFIG_SH_SH7785LCR) += ops-sh7785lcr.o fixups-sh7785lcr.o +obj-$(CONFIG_SH_SH7785LCR) += ops-sh7785lcr.o fixups-r7780rp.o diff --git a/arch/sh/drivers/pci/fixups-se7780.c b/arch/sh/drivers/pci/fixups-se7780.c deleted file mode 100644 index a968af7d6f7..00000000000 --- a/arch/sh/drivers/pci/fixups-se7780.c +++ /dev/null @@ -1,62 +0,0 @@ -/* - * arch/sh/drivers/pci/fixups-se7780.c - * - * HITACHI UL Solution Engine 7780 PCI fixups - * - * Copyright (C) 2003 Lineo uSolutions, Inc. - * Copyright (C) 2004 - 2006 Paul Mundt - * Copyright (C) 2006 Nobuhiro Iwamatsu - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include -#include "pci-sh4.h" -#include - -int pci_fixup_pcic(struct pci_channel *chan) -{ - ctrl_outl(0x00000001, SH7780_PCI_VCR2); - - /* Enable all interrupts, so we know what to fix */ - pci_write_reg(chan, 0x0000C3FF, SH7780_PCIIMR); - pci_write_reg(chan, 0x0000380F, SH7780_PCIAINTM); - - /* Set up standard PCI config registers */ - ctrl_outw(0xFB00, PCI_REG(SH7780_PCISTATUS)); - ctrl_outw(0x0047, PCI_REG(SH7780_PCICMD)); - ctrl_outb( 0x00, PCI_REG(SH7780_PCIPIF)); - ctrl_outb( 0x00, PCI_REG(SH7780_PCISUB)); - ctrl_outb( 0x06, PCI_REG(SH7780_PCIBCC)); - ctrl_outw(0x1912, PCI_REG(SH7780_PCISVID)); - ctrl_outw(0x0001, PCI_REG(SH7780_PCISID)); - - pci_write_reg(chan, 0x08000000, SH7780_PCIMBAR0); /* PCI */ - pci_write_reg(chan, 0x08000000, SH7780_PCILAR0); /* SHwy */ - pci_write_reg(chan, 0x07F00001, SH7780_PCILSR); /* size 128M w/ MBAR */ - - pci_write_reg(chan, 0x00000000, SH7780_PCIMBAR1); - pci_write_reg(chan, 0x00000000, SH7780_PCILAR1); - pci_write_reg(chan, 0x00000000, SH7780_PCILSR1); - - pci_write_reg(chan, 0xAB000801, SH7780_PCIIBAR); - - /* - * Set the MBR so PCI address is one-to-one with window, - * meaning all calls go straight through... use ifdef to - * catch erroneous assumption. - */ - pci_write_reg(chan, 0xFD000000 , SH7780_PCIMBR0); - pci_write_reg(chan, 0x00FC0000 , SH7780_PCIMBMR0); /* 16M */ - - /* Set IOBR for window containing area specified in pci.h */ - pci_write_reg(chan, chan->io_resource->start & ~(SH7780_PCI_IO_SIZE-1), - SH7780_PCIIOBR); - pci_write_reg(chan, (SH7780_PCI_IO_SIZE-1) & (7 << 18), - SH7780_PCIIOBMR); - - pci_write_reg(chan, 0xA5000C01, SH7780_PCICR); - - return 0; -} diff --git a/arch/sh/drivers/pci/fixups-sh7785lcr.c b/arch/sh/drivers/pci/fixups-sh7785lcr.c deleted file mode 100644 index 9e7dc79037e..00000000000 --- a/arch/sh/drivers/pci/fixups-sh7785lcr.c +++ /dev/null @@ -1,47 +0,0 @@ -/* - * arch/sh/drivers/pci/fixups-sh7785lcr.c - * - * R0P7785LC0011RL PCI fixups - * Copyright (C) 2008 Yoshihiro Shimoda - * - * Based on arch/sh/drivers/pci/fixups-r7780rp.c - * Copyright (C) 2003 Lineo uSolutions, Inc. - * Copyright (C) 2004 - 2006 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include -#include "pci-sh4.h" - -int pci_fixup_pcic(struct pci_channel *chan) -{ - pci_write_reg(chan, 0x000043ff, SH4_PCIINTM); - pci_write_reg(chan, 0x0000380f, SH4_PCIAINTM); - - pci_write_reg(chan, 0xfbb00047, SH7780_PCICMD); - pci_write_reg(chan, 0x00000000, SH7780_PCIIBAR); - - pci_write_reg(chan, 0x00011912, SH7780_PCISVID); - pci_write_reg(chan, 0x08000000, SH7780_PCICSCR0); - pci_write_reg(chan, 0x0000001b, SH7780_PCICSAR0); - pci_write_reg(chan, 0xfd000000, SH7780_PCICSCR1); - pci_write_reg(chan, 0x0000000f, SH7780_PCICSAR1); - - pci_write_reg(chan, 0xfd000000, SH7780_PCIMBR0); - pci_write_reg(chan, 0x00fc0000, SH7780_PCIMBMR0); - -#ifdef CONFIG_32BIT - pci_write_reg(chan, 0xc0000000, SH7780_PCIMBR2); - pci_write_reg(chan, 0x20000000 - SH7780_PCI_IO_SIZE, SH7780_PCIMBMR2); -#endif - - /* Set IOBR for windows containing area specified in pci.h */ - pci_write_reg(chan, chan->io_resource->start & ~(SH7780_PCI_IO_SIZE - 1), - SH7780_PCIIOBR); - pci_write_reg(chan, ((SH7780_PCI_IO_SIZE - 1) & (7 << 18)), - SH7780_PCIIOBMR); - - return 0; -} -- cgit v1.2.3 From 0232ba9ce031d0fd8f331fa8b3c00e16901f54e6 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Thu, 16 Apr 2009 18:01:31 +0900 Subject: sh: pci: Kill off unused SH4_PCIC_NO_RESET code. Nothing ended up using this anymore, so just kill it off. Signed-off-by: Paul Mundt --- arch/sh/drivers/pci/ops-landisk.c | 2 -- arch/sh/drivers/pci/ops-lboxre2.c | 5 ----- arch/sh/drivers/pci/ops-r7780rp.c | 2 -- arch/sh/drivers/pci/ops-rts7751r2d.c | 7 ------- arch/sh/drivers/pci/ops-sdk7780.c | 1 - arch/sh/drivers/pci/ops-se7780.c | 1 - arch/sh/drivers/pci/ops-sh7785lcr.c | 2 -- arch/sh/drivers/pci/ops-snapgear.c | 2 -- arch/sh/drivers/pci/ops-titan.c | 2 -- arch/sh/drivers/pci/pci-sh4.h | 4 ---- arch/sh/drivers/pci/pci-sh7751.c | 15 --------------- arch/sh/drivers/pci/pci-sh7780.c | 15 --------------- 12 files changed, 58 deletions(-) diff --git a/arch/sh/drivers/pci/ops-landisk.c b/arch/sh/drivers/pci/ops-landisk.c index c46911d95ec..178b77828aa 100644 --- a/arch/sh/drivers/pci/ops-landisk.c +++ b/arch/sh/drivers/pci/ops-landisk.c @@ -39,8 +39,6 @@ static struct sh4_pci_address_map sh7751_pci_map = { .base = SH7751_CS3_BASE_ADDR, .size = (64 << 20), /* 64MB */ }, - - .flags = SH4_PCIC_NO_RESET, }; int __init pcibios_init_platform(void) diff --git a/arch/sh/drivers/pci/ops-lboxre2.c b/arch/sh/drivers/pci/ops-lboxre2.c index 781496bfb1f..91cabd84f02 100644 --- a/arch/sh/drivers/pci/ops-lboxre2.c +++ b/arch/sh/drivers/pci/ops-lboxre2.c @@ -48,11 +48,6 @@ static struct sh4_pci_address_map sh7751_pci_map = { .base = SH7751_CS3_BASE_ADDR, .size = 0x04000000, }, - .window1 = { - .base = 0x00000000, /* Unused */ - .size = 0x00000000, /* Unused */ - }, - .flags = SH4_PCIC_NO_RESET, }; int __init pcibios_init_platform(void) diff --git a/arch/sh/drivers/pci/ops-r7780rp.c b/arch/sh/drivers/pci/ops-r7780rp.c index c58f1cff9fb..8ec6d225ef9 100644 --- a/arch/sh/drivers/pci/ops-r7780rp.c +++ b/arch/sh/drivers/pci/ops-r7780rp.c @@ -57,8 +57,6 @@ static struct sh4_pci_address_map sh7780_pci_map = { .base = SH7780_CS3_BASE_ADDR, .size = 0x04000000, }, - - .flags = SH4_PCIC_NO_RESET, }; int __init pcibios_init_platform(void) diff --git a/arch/sh/drivers/pci/ops-rts7751r2d.c b/arch/sh/drivers/pci/ops-rts7751r2d.c index d374cd37f45..96b916c0d6c 100644 --- a/arch/sh/drivers/pci/ops-rts7751r2d.c +++ b/arch/sh/drivers/pci/ops-rts7751r2d.c @@ -56,13 +56,6 @@ static struct sh4_pci_address_map sh7751_pci_map = { .base = SH7751_CS3_BASE_ADDR, .size = 0x04000000, }, - - .window1 = { - .base = 0x00000000, /* Unused */ - .size = 0x00000000, /* Unused */ - }, - - .flags = SH4_PCIC_NO_RESET, }; int __init pcibios_init_platform(void) diff --git a/arch/sh/drivers/pci/ops-sdk7780.c b/arch/sh/drivers/pci/ops-sdk7780.c index b34fbc54a7c..6a0b7c06783 100644 --- a/arch/sh/drivers/pci/ops-sdk7780.c +++ b/arch/sh/drivers/pci/ops-sdk7780.c @@ -62,7 +62,6 @@ static struct sh4_pci_address_map sdk7780_pci_map = { .base = SH7780_CS3_BASE_ADDR, .size = 0x04000000, }, - .flags = SH4_PCIC_NO_RESET, }; int __init pcibios_init_platform(void) diff --git a/arch/sh/drivers/pci/ops-se7780.c b/arch/sh/drivers/pci/ops-se7780.c index 47302077a0c..583b8e82ff9 100644 --- a/arch/sh/drivers/pci/ops-se7780.c +++ b/arch/sh/drivers/pci/ops-se7780.c @@ -67,7 +67,6 @@ static struct sh4_pci_address_map se7780_pci_map = { .base = SH7780_CS2_BASE_ADDR, .size = 0x04000000, }, - .flags = SH4_PCIC_NO_RESET, }; int __init pcibios_init_platform(void) diff --git a/arch/sh/drivers/pci/ops-sh7785lcr.c b/arch/sh/drivers/pci/ops-sh7785lcr.c index afbb9bd4751..ab0d1decf2d 100644 --- a/arch/sh/drivers/pci/ops-sh7785lcr.c +++ b/arch/sh/drivers/pci/ops-sh7785lcr.c @@ -55,8 +55,6 @@ static struct sh4_pci_address_map sh7785_pci_map = { .size = 0x20000000, #endif }, - - .flags = SH4_PCIC_NO_RESET, }; int __init pcibios_init_platform(void) diff --git a/arch/sh/drivers/pci/ops-snapgear.c b/arch/sh/drivers/pci/ops-snapgear.c index 2e254c6cf6c..dd2c5df2830 100644 --- a/arch/sh/drivers/pci/ops-snapgear.c +++ b/arch/sh/drivers/pci/ops-snapgear.c @@ -54,8 +54,6 @@ static struct sh4_pci_address_map sh7751_pci_map = { .base = SH7751_CS2_BASE_ADDR, .size = SNAPGEAR_LSR1_SIZE, }, - - .flags = SH4_PCIC_NO_RESET, }; /* diff --git a/arch/sh/drivers/pci/ops-titan.c b/arch/sh/drivers/pci/ops-titan.c index 31ed03716a2..e45bb62bf8c 100644 --- a/arch/sh/drivers/pci/ops-titan.c +++ b/arch/sh/drivers/pci/ops-titan.c @@ -66,8 +66,6 @@ static struct sh4_pci_address_map sh7751_pci_map = { .base = SH7751_CS2_BASE_ADDR, .size = SH7751_MEM_REGION_SIZE*2, }, - - .flags = SH4_PCIC_NO_RESET, }; int __init pcibios_init_platform(void) diff --git a/arch/sh/drivers/pci/pci-sh4.h b/arch/sh/drivers/pci/pci-sh4.h index 90abfe3d39b..3d5296cde62 100644 --- a/arch/sh/drivers/pci/pci-sh4.h +++ b/arch/sh/drivers/pci/pci-sh4.h @@ -149,9 +149,6 @@ #define SH4_PCIPDTR_PB0 0x000000001 /* Port 0 Enable */ #define SH4_PCIPDR 0x220 /* Port IO Data Register */ -/* Flags */ -#define SH4_PCIC_NO_RESET 0x0001 - /* arch/sh/kernel/drivers/pci/ops-sh4.c */ extern struct pci_ops sh4_pci_ops; int sh4_pci_check_direct(struct pci_channel *chan); @@ -165,7 +162,6 @@ struct sh4_pci_address_space { struct sh4_pci_address_map { struct sh4_pci_address_space window0; struct sh4_pci_address_space window1; - unsigned long flags; }; static inline void pci_write_reg(struct pci_channel *chan, diff --git a/arch/sh/drivers/pci/pci-sh7751.c b/arch/sh/drivers/pci/pci-sh7751.c index 2a6c7aab2d7..af8874436d2 100644 --- a/arch/sh/drivers/pci/pci-sh7751.c +++ b/arch/sh/drivers/pci/pci-sh7751.c @@ -99,21 +99,6 @@ int __init sh7751_pcic_init(struct pci_channel *chan, word = SH4_PCIPINT_D3 | SH4_PCIPINT_D0; pci_write_reg(chan, word, SH4_PCIPINT); - /* - * This code is unused for some boards as it is done in the - * bootloader and doing it here means the MAC addresses loaded - * by the bootloader get lost. - */ - if (!(map->flags & SH4_PCIC_NO_RESET)) { - /* toggle PCI reset pin */ - word = SH4_PCICR_PREFIX | SH4_PCICR_PRST; - pci_write_reg(chan, word, SH4_PCICR); - /* Wait for a long time... not 1 sec. but long enough */ - mdelay(100); - word = SH4_PCICR_PREFIX; - pci_write_reg(chan, word, SH4_PCICR); - } - /* set the command/status bits to: * Wait Cycle Control + Parity Enable + Bus Master + * Mem space enable diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c index 87a7f3b7a38..282cabe15e3 100644 --- a/arch/sh/drivers/pci/pci-sh7780.c +++ b/arch/sh/drivers/pci/pci-sh7780.c @@ -96,21 +96,6 @@ int __init sh7780_pcic_init(struct pci_channel *chan, { u32 word; - /* - * This code is unused for some boards as it is done in the - * bootloader and doing it here means the MAC addresses loaded - * by the bootloader get lost. - */ - if (!(map->flags & SH4_PCIC_NO_RESET)) { - /* toggle PCI reset pin */ - word = SH4_PCICR_PREFIX | SH4_PCICR_PRST; - pci_write_reg(chan, word, SH4_PCICR); - /* Wait for a long time... not 1 sec. but long enough */ - mdelay(100); - word = SH4_PCICR_PREFIX; - pci_write_reg(chan, word, SH4_PCICR); - } - /* set the command/status bits to: * Wait Cycle Control + Parity Enable + Bus Master + * Mem space enable -- cgit v1.2.3 From 0ad8acaf434d360ad99813d981a68e605d6c8179 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Tue, 24 Mar 2009 21:21:08 -0400 Subject: cfg80211: fix NULL pointer deference in reg_device_remove() We won't ever get here as regulatory_hint_core() can only fail on -ENOMEM and in that case we don't initialize cfg80211 but this is technically correct code. This is actually good for stable, where we don't check for -ENOMEM failure on __regulatory_hint()'s failure. Cc: stable@kernel.org Reported-by: Quentin Armitage Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville --- net/wireless/reg.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 6327e1617ac..6c1993d9990 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -2095,11 +2095,12 @@ int set_regdom(const struct ieee80211_regdomain *rd) /* Caller must hold cfg80211_mutex */ void reg_device_remove(struct wiphy *wiphy) { - struct wiphy *request_wiphy; + struct wiphy *request_wiphy = NULL; assert_cfg80211_lock(); - request_wiphy = wiphy_idx_to_wiphy(last_request->wiphy_idx); + if (last_request) + request_wiphy = wiphy_idx_to_wiphy(last_request->wiphy_idx); kfree(wiphy->regd); if (!last_request || !request_wiphy) -- cgit v1.2.3 From b3631286aca3f54427ca0eb950981e9753866f6c Mon Sep 17 00:00:00 2001 From: Vasanthakumar Thiagarajan Date: Wed, 25 Mar 2009 18:10:18 +0530 Subject: mac80211: Fix bug in getting rx status for frames pending in reorder buffer Currently rx status for frames which are completed from reorder buffer is taken from it's cb area which is not always right, cb is not holding the rx status when driver uses mac80211's non-irq rx handler to pass it's received frames. This results in dropping almost all frames from reorder buffer when security is enabled by doing double decryption (first in hw, second in sw because of wrong rx status). This patch copies rx status into cb area before the frame is put into reorder buffer. After this patch, there is a significant improvement in throughput with ath9k + WPA2(AES). Signed-off-by: Vasanthakumar Thiagarajan Acked-by: Johannes Berg Cc: stable@kernel.org Signed-off-by: John W. Linville --- net/mac80211/rx.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index 64ebe664eff..5fa7aedd90e 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -29,6 +29,7 @@ static u8 ieee80211_sta_manage_reorder_buf(struct ieee80211_hw *hw, struct tid_ampdu_rx *tid_agg_rx, struct sk_buff *skb, + struct ieee80211_rx_status *status, u16 mpdu_seq_num, int bar_req); /* @@ -1688,7 +1689,7 @@ ieee80211_rx_h_ctrl(struct ieee80211_rx_data *rx) /* manage reordering buffer according to requested */ /* sequence number */ rcu_read_lock(); - ieee80211_sta_manage_reorder_buf(hw, tid_agg_rx, NULL, + ieee80211_sta_manage_reorder_buf(hw, tid_agg_rx, NULL, NULL, start_seq_num, 1); rcu_read_unlock(); return RX_DROP_UNUSABLE; @@ -2293,6 +2294,7 @@ static inline u16 seq_sub(u16 sq1, u16 sq2) static u8 ieee80211_sta_manage_reorder_buf(struct ieee80211_hw *hw, struct tid_ampdu_rx *tid_agg_rx, struct sk_buff *skb, + struct ieee80211_rx_status *rxstatus, u16 mpdu_seq_num, int bar_req) { @@ -2374,6 +2376,8 @@ static u8 ieee80211_sta_manage_reorder_buf(struct ieee80211_hw *hw, /* put the frame in the reordering buffer */ tid_agg_rx->reorder_buf[index] = skb; + memcpy(tid_agg_rx->reorder_buf[index]->cb, rxstatus, + sizeof(*rxstatus)); tid_agg_rx->stored_mpdu_num++; /* release the buffer until next missing frame */ index = seq_sub(tid_agg_rx->head_seq_num, tid_agg_rx->ssn) @@ -2399,7 +2403,8 @@ static u8 ieee80211_sta_manage_reorder_buf(struct ieee80211_hw *hw, } static u8 ieee80211_rx_reorder_ampdu(struct ieee80211_local *local, - struct sk_buff *skb) + struct sk_buff *skb, + struct ieee80211_rx_status *status) { struct ieee80211_hw *hw = &local->hw; struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; @@ -2448,7 +2453,7 @@ static u8 ieee80211_rx_reorder_ampdu(struct ieee80211_local *local, /* according to mpdu sequence number deal with reordering buffer */ mpdu_seq_num = (sc & IEEE80211_SCTL_SEQ) >> 4; - ret = ieee80211_sta_manage_reorder_buf(hw, tid_agg_rx, skb, + ret = ieee80211_sta_manage_reorder_buf(hw, tid_agg_rx, skb, status, mpdu_seq_num, 0); end_reorder: return ret; @@ -2512,7 +2517,7 @@ void __ieee80211_rx(struct ieee80211_hw *hw, struct sk_buff *skb, return; } - if (!ieee80211_rx_reorder_ampdu(local, skb)) + if (!ieee80211_rx_reorder_ampdu(local, skb, status)) __ieee80211_rx_handle_packet(hw, skb, status, rate); rcu_read_unlock(); -- cgit v1.2.3 From ec9a1d8c13e36440eda0f3c79b8149080e3ab5ba Mon Sep 17 00:00:00 2001 From: Michael Buesch Date: Fri, 27 Mar 2009 22:51:58 +0100 Subject: b43: Poison RX buffers This patch adds poisoning and sanity checking to the RX DMA buffers. This is used for protection against buggy hardware/firmware that raises RX interrupts without doing an actual DMA transfer. This mechanism protects against rare "bad packets" (due to uninitialized skb data) and rare kernel crashes due to uninitialized RX headers. The poison is selected to not match on valid frames and to be cheap for checking. The poison check mechanism _might_ trigger incorrectly, if we are voluntarily receiving frames with bad PLCP headers. However, this is nonfatal, because the chance of such a match is basically zero and in case it happens it just results in dropping the packet. Bad-PLCP RX defaults to off, and you should leave it off unless you want to listen to the latest news broadcasted by your microwave oven. This patch also moves the initialization of the RX-header "length" field in front of the mapping of the DMA buffer. The CPU should not touch the buffer after we mapped it. Cc: stable@kernel.org Reported-by: Francesco Gringoli Signed-off-by: Michael Buesch Signed-off-by: John W. Linville --- drivers/net/wireless/b43/dma.c | 37 +++++++++++++++++++++++++++++++++---- 1 file changed, 33 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/b43/dma.c b/drivers/net/wireless/b43/dma.c index e228c1de6e1..dfa6c72c3bd 100644 --- a/drivers/net/wireless/b43/dma.c +++ b/drivers/net/wireless/b43/dma.c @@ -555,11 +555,32 @@ address_error: return 1; } +static bool b43_rx_buffer_is_poisoned(struct b43_dmaring *ring, struct sk_buff *skb) +{ + unsigned char *f = skb->data + ring->frameoffset; + + return ((f[0] & f[1] & f[2] & f[3] & f[4] & f[5] & f[6] & f[7]) == 0xFF); +} + +static void b43_poison_rx_buffer(struct b43_dmaring *ring, struct sk_buff *skb) +{ + struct b43_rxhdr_fw4 *rxhdr; + unsigned char *frame; + + /* This poisons the RX buffer to detect DMA failures. */ + + rxhdr = (struct b43_rxhdr_fw4 *)(skb->data); + rxhdr->frame_len = 0; + + B43_WARN_ON(ring->rx_buffersize < ring->frameoffset + sizeof(struct b43_plcp_hdr6) + 2); + frame = skb->data + ring->frameoffset; + memset(frame, 0xFF, sizeof(struct b43_plcp_hdr6) + 2 /* padding */); +} + static int setup_rx_descbuffer(struct b43_dmaring *ring, struct b43_dmadesc_generic *desc, struct b43_dmadesc_meta *meta, gfp_t gfp_flags) { - struct b43_rxhdr_fw4 *rxhdr; dma_addr_t dmaaddr; struct sk_buff *skb; @@ -568,6 +589,7 @@ static int setup_rx_descbuffer(struct b43_dmaring *ring, skb = __dev_alloc_skb(ring->rx_buffersize, gfp_flags); if (unlikely(!skb)) return -ENOMEM; + b43_poison_rx_buffer(ring, skb); dmaaddr = map_descbuffer(ring, skb->data, ring->rx_buffersize, 0); if (b43_dma_mapping_error(ring, dmaaddr, ring->rx_buffersize, 0)) { /* ugh. try to realloc in zone_dma */ @@ -578,6 +600,7 @@ static int setup_rx_descbuffer(struct b43_dmaring *ring, skb = __dev_alloc_skb(ring->rx_buffersize, gfp_flags); if (unlikely(!skb)) return -ENOMEM; + b43_poison_rx_buffer(ring, skb); dmaaddr = map_descbuffer(ring, skb->data, ring->rx_buffersize, 0); if (b43_dma_mapping_error(ring, dmaaddr, ring->rx_buffersize, 0)) { @@ -592,9 +615,6 @@ static int setup_rx_descbuffer(struct b43_dmaring *ring, ring->ops->fill_descriptor(ring, desc, dmaaddr, ring->rx_buffersize, 0, 0, 0); - rxhdr = (struct b43_rxhdr_fw4 *)(skb->data); - rxhdr->frame_len = 0; - return 0; } @@ -1489,6 +1509,15 @@ static void dma_rx(struct b43_dmaring *ring, int *slot) goto drop; } } + if (unlikely(b43_rx_buffer_is_poisoned(ring, skb))) { + /* Something went wrong with the DMA. + * The device did not touch the buffer and did not overwrite the poison. */ + b43dbg(ring->dev->wl, "DMA RX: Dropping poisoned buffer.\n"); + /* recycle the descriptor buffer. */ + sync_descbuffer_for_device(ring, meta->dmaaddr, + ring->rx_buffersize); + goto drop; + } if (unlikely(len > ring->rx_buffersize)) { /* The data did not fit into one descriptor buffer * and is split over multiple buffers. -- cgit v1.2.3 From cf68636a9773aa97915497fe54fa4a51e3f08f3a Mon Sep 17 00:00:00 2001 From: Michael Buesch Date: Sat, 28 Mar 2009 00:41:25 +0100 Subject: b43: Refresh RX poison on buffer recycling The RX buffer poison needs to be refreshed, if we recycle an RX buffer, because it might be (partially) overwritten by some DMA operations. Cc: stable@kernel.org Cc: Francesco Gringoli Signed-off-by: Michael Buesch Signed-off-by: John W. Linville --- drivers/net/wireless/b43/dma.c | 21 +++++++++++---------- 1 file changed, 11 insertions(+), 10 deletions(-) diff --git a/drivers/net/wireless/b43/dma.c b/drivers/net/wireless/b43/dma.c index dfa6c72c3bd..eae680b5305 100644 --- a/drivers/net/wireless/b43/dma.c +++ b/drivers/net/wireless/b43/dma.c @@ -1503,20 +1503,16 @@ static void dma_rx(struct b43_dmaring *ring, int *slot) len = le16_to_cpu(rxhdr->frame_len); } while (len == 0 && i++ < 5); if (unlikely(len == 0)) { - /* recycle the descriptor buffer. */ - sync_descbuffer_for_device(ring, meta->dmaaddr, - ring->rx_buffersize); - goto drop; + dmaaddr = meta->dmaaddr; + goto drop_recycle_buffer; } } if (unlikely(b43_rx_buffer_is_poisoned(ring, skb))) { /* Something went wrong with the DMA. * The device did not touch the buffer and did not overwrite the poison. */ b43dbg(ring->dev->wl, "DMA RX: Dropping poisoned buffer.\n"); - /* recycle the descriptor buffer. */ - sync_descbuffer_for_device(ring, meta->dmaaddr, - ring->rx_buffersize); - goto drop; + dmaaddr = meta->dmaaddr; + goto drop_recycle_buffer; } if (unlikely(len > ring->rx_buffersize)) { /* The data did not fit into one descriptor buffer @@ -1530,6 +1526,7 @@ static void dma_rx(struct b43_dmaring *ring, int *slot) while (1) { desc = ops->idx2desc(ring, *slot, &meta); /* recycle the descriptor buffer. */ + b43_poison_rx_buffer(ring, meta->skb); sync_descbuffer_for_device(ring, meta->dmaaddr, ring->rx_buffersize); *slot = next_slot(ring, *slot); @@ -1548,8 +1545,7 @@ static void dma_rx(struct b43_dmaring *ring, int *slot) err = setup_rx_descbuffer(ring, desc, meta, GFP_ATOMIC); if (unlikely(err)) { b43dbg(ring->dev->wl, "DMA RX: setup_rx_descbuffer() failed\n"); - sync_descbuffer_for_device(ring, dmaaddr, ring->rx_buffersize); - goto drop; + goto drop_recycle_buffer; } unmap_descbuffer(ring, dmaaddr, ring->rx_buffersize, 0); @@ -1559,6 +1555,11 @@ static void dma_rx(struct b43_dmaring *ring, int *slot) b43_rx(ring->dev, skb, rxhdr); drop: return; + +drop_recycle_buffer: + /* Poison and recycle the RX buffer. */ + b43_poison_rx_buffer(ring, skb); + sync_descbuffer_for_device(ring, dmaaddr, ring->rx_buffersize); } void b43_dma_rx(struct b43_dmaring *ring) -- cgit v1.2.3 From 540828196e48ec54b64067a2b9defd870bff3ece Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Wed, 25 Mar 2009 03:11:44 +0100 Subject: p54: replace MAC80211_LEDS with P54_LEDS in p54.h I'm very sorry, as this change belongs to the other patch: "[PATCH] p54: fix SoftLED compile dependencies". however I must have somehow lost "git add" for that file. Signed-off-by: Christian Lamparter Acked-by: Larry Finger Signed-off-by: John W. Linville --- drivers/net/wireless/p54/p54.h | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/net/wireless/p54/p54.h b/drivers/net/wireless/p54/p54.h index 2dda5fe418b..ecf8b6ed5a4 100644 --- a/drivers/net/wireless/p54/p54.h +++ b/drivers/net/wireless/p54/p54.h @@ -14,9 +14,9 @@ * published by the Free Software Foundation. */ -#ifdef CONFIG_MAC80211_LEDS +#ifdef CONFIG_P54_LEDS #include -#endif /* CONFIG_MAC80211_LEDS */ +#endif /* CONFIG_P54_LEDS */ enum p54_control_frame_types { P54_CONTROL_TYPE_SETUP = 0, @@ -116,7 +116,7 @@ enum fw_state { FW_STATE_RESETTING, }; -#ifdef CONFIG_MAC80211_LEDS +#ifdef CONFIG_P54_LEDS #define P54_LED_MAX_NAME_LEN 31 @@ -129,7 +129,7 @@ struct p54_led_dev { unsigned int registered; }; -#endif /* CONFIG_MAC80211_LEDS */ +#endif /* CONFIG_P54_LEDS */ struct p54_common { struct ieee80211_hw *hw; @@ -177,10 +177,10 @@ struct p54_common { u8 privacy_caps; u8 rx_keycache_size; /* LED management */ - #ifdef CONFIG_MAC80211_LEDS +#ifdef CONFIG_P54_LEDS struct p54_led_dev assoc_led; struct p54_led_dev tx_led; - #endif /* CONFIG_MAC80211_LEDS */ +#endif /* CONFIG_P54_LEDS */ u16 softled_state; /* bit field of glowing LEDs */ }; -- cgit v1.2.3 From 731c6531684250c46d732e369b25b003356f3947 Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Mon, 30 Mar 2009 15:55:24 +0200 Subject: p54spi: fix locking warning in p54spi_op_tx This patch fixes the following waring: > ------------[ cut here ]------------ >WARNING: at kernel/softirq.c:138 local_bh_enable+0x54/0xbc() >Modules linked in: p54spi >[] (dump_stack+0x0/0x14) >[] (warn_on_slowpath+0x0/0x68) >[] (local_bh_enable+0x0/0xbc) >[] (p54spi_op_tx+0x0/0x4c [p54spi]) >[] (p54_sta_unlock+0x0/0x78) p54spi_op_tx needs to be called from different locking contexts. Therefore we have to protect the linked list with irqsave spinlocks. Reported-by: Max Filippov Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville --- drivers/net/wireless/p54/p54spi.c | 25 +++++++++++++------------ 1 file changed, 13 insertions(+), 12 deletions(-) diff --git a/drivers/net/wireless/p54/p54spi.c b/drivers/net/wireless/p54/p54spi.c index 2b222aaa6f0..d1fe577de3d 100644 --- a/drivers/net/wireless/p54/p54spi.c +++ b/drivers/net/wireless/p54/p54spi.c @@ -457,9 +457,10 @@ static int p54spi_wq_tx(struct p54s_priv *priv) struct ieee80211_tx_info *info; struct p54_tx_info *minfo; struct p54s_tx_info *dinfo; + unsigned long flags; int ret = 0; - spin_lock_bh(&priv->tx_lock); + spin_lock_irqsave(&priv->tx_lock, flags); while (!list_empty(&priv->tx_pending)) { entry = list_entry(priv->tx_pending.next, @@ -467,7 +468,7 @@ static int p54spi_wq_tx(struct p54s_priv *priv) list_del_init(&entry->tx_list); - spin_unlock_bh(&priv->tx_lock); + spin_unlock_irqrestore(&priv->tx_lock, flags); dinfo = container_of((void *) entry, struct p54s_tx_info, tx_list); @@ -479,16 +480,14 @@ static int p54spi_wq_tx(struct p54s_priv *priv) ret = p54spi_tx_frame(priv, skb); - spin_lock_bh(&priv->tx_lock); - if (ret < 0) { p54_free_skb(priv->hw, skb); - goto out; + return ret; } - } -out: - spin_unlock_bh(&priv->tx_lock); + spin_lock_irqsave(&priv->tx_lock, flags); + } + spin_unlock_irqrestore(&priv->tx_lock, flags); return ret; } @@ -498,12 +497,13 @@ static void p54spi_op_tx(struct ieee80211_hw *dev, struct sk_buff *skb) struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); struct p54_tx_info *mi = (struct p54_tx_info *) info->rate_driver_data; struct p54s_tx_info *di = (struct p54s_tx_info *) mi->data; + unsigned long flags; BUILD_BUG_ON(sizeof(*di) > sizeof((mi->data))); - spin_lock_bh(&priv->tx_lock); + spin_lock_irqsave(&priv->tx_lock, flags); list_add_tail(&di->tx_list, &priv->tx_pending); - spin_unlock_bh(&priv->tx_lock); + spin_unlock_irqrestore(&priv->tx_lock, flags); queue_work(priv->hw->workqueue, &priv->work); } @@ -604,6 +604,7 @@ out: static void p54spi_op_stop(struct ieee80211_hw *dev) { struct p54s_priv *priv = dev->priv; + unsigned long flags; if (mutex_lock_interruptible(&priv->mutex)) { /* FIXME: how to handle this error? */ @@ -615,9 +616,9 @@ static void p54spi_op_stop(struct ieee80211_hw *dev) cancel_work_sync(&priv->work); p54spi_power_off(priv); - spin_lock_bh(&priv->tx_lock); + spin_lock_irqsave(&priv->tx_lock, flags); INIT_LIST_HEAD(&priv->tx_pending); - spin_unlock_bh(&priv->tx_lock); + spin_unlock_irqrestore(&priv->tx_lock, flags); priv->fw_state = FW_STATE_OFF; mutex_unlock(&priv->mutex); -- cgit v1.2.3 From c6dbe17f193c4adc8afc6884f26efb5fa27aa8af Mon Sep 17 00:00:00 2001 From: Masakazu Mokuno Date: Mon, 30 Mar 2009 11:04:36 -0700 Subject: net/ps3: Fix wireless AP connect error handling This patch fixes the bug that the driver tries to continue to connect(associate) to AP even if gelic_wl_do_{wpa,wep}_setup() fails, Signed-off-by: Masakazu Mokuno Signed-off-by: Geoff Levand Signed-off-by: John W. Linville --- drivers/net/ps3_gelic_wireless.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/ps3_gelic_wireless.c b/drivers/net/ps3_gelic_wireless.c index a5ac2bd58b5..4f3ada622f9 100644 --- a/drivers/net/ps3_gelic_wireless.c +++ b/drivers/net/ps3_gelic_wireless.c @@ -2101,6 +2101,9 @@ static int gelic_wl_associate_bss(struct gelic_wl_info *wl, if (ret) { pr_debug("%s: WEP/WPA setup failed %d\n", __func__, ret); + ret = -EPERM; + gelic_wl_send_iwap_event(wl, NULL); + goto out; } /* start association */ -- cgit v1.2.3 From 853da11b94e674445e93660f47a5f0aeeea09623 Mon Sep 17 00:00:00 2001 From: Pavel Roskin Date: Fri, 3 Apr 2009 20:10:26 -0400 Subject: ath9k: fix access to a freed skb in ath_rx_tasklet() Signed-off-by: Pavel Roskin Signed-off-by: John W. Linville --- drivers/net/wireless/ath9k/recv.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath9k/recv.c b/drivers/net/wireless/ath9k/recv.c index 71cb18d6757..dd1f3015674 100644 --- a/drivers/net/wireless/ath9k/recv.c +++ b/drivers/net/wireless/ath9k/recv.c @@ -493,6 +493,7 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush) int hdrlen, padsize, retval; bool decrypt_error = false; u8 keyix; + __le16 fc; spin_lock_bh(&sc->rx.rxbuflock); @@ -606,6 +607,7 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush) /* see if any padding is done by the hw and remove it */ hdr = (struct ieee80211_hdr *)skb->data; hdrlen = ieee80211_get_hdrlen_from_skb(skb); + fc = hdr->frame_control; /* The MAC header is padded to have 32-bit boundary if the * packet payload is non-zero. The general calculation for @@ -690,7 +692,7 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush) sc->rx.rxotherant = 0; } - if (ieee80211_is_beacon(hdr->frame_control) && + if (ieee80211_is_beacon(fc) && (sc->sc_flags & SC_OP_WAIT_FOR_BEACON)) { sc->sc_flags &= ~SC_OP_WAIT_FOR_BEACON; ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_NETWORK_SLEEP); -- cgit v1.2.3 From 47afbaf5af9454a7a1a64591e20cbfcc27ca67a8 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 7 Apr 2009 15:22:28 +0200 Subject: mac80211: correct wext transmit power handler Wext makes no assumptions about the contents of data->txpower.fixed and data->txpower.value when data->txpower.disabled is set, so do not update the user-requested power level while disabling. Also, when wext configures a really _fixed_ power output [1], we should reject it instead of limiting it to the regulatory constraint. If the user wants to set a _limit_ [2] then we should honour that. [1] iwconfig wlan0 txpower 20dBm fixed [2] iwconfig wlan0 txpower 10dBm This fixes http://www.intellinuxwireless.org/bugzilla/show_bug.cgi?id=1942 Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- net/mac80211/main.c | 2 +- net/mac80211/wext.c | 41 +++++++++++++++++++++++++++++++++-------- 2 files changed, 34 insertions(+), 9 deletions(-) diff --git a/net/mac80211/main.c b/net/mac80211/main.c index a6f1d8a869b..fbcbed6cad0 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -258,7 +258,7 @@ int ieee80211_hw_config(struct ieee80211_local *local, u32 changed) (chan->max_power - local->power_constr_level) : chan->max_power; - if (local->user_power_level) + if (local->user_power_level >= 0) power = min(power, local->user_power_level); if (local->hw.conf.power_level != power) { diff --git a/net/mac80211/wext.c b/net/mac80211/wext.c index deb4ecec122..ce9115c1815 100644 --- a/net/mac80211/wext.c +++ b/net/mac80211/wext.c @@ -417,6 +417,7 @@ static int ieee80211_ioctl_siwtxpower(struct net_device *dev, { struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); struct ieee80211_channel* chan = local->hw.conf.channel; + bool reconf = false; u32 reconf_flags = 0; int new_power_level; @@ -427,14 +428,38 @@ static int ieee80211_ioctl_siwtxpower(struct net_device *dev, if (!chan) return -EINVAL; - if (data->txpower.fixed) - new_power_level = min(data->txpower.value, chan->max_power); - else /* Automatic power level setting */ - new_power_level = chan->max_power; + /* only change when not disabling */ + if (!data->txpower.disabled) { + if (data->txpower.fixed) { + if (data->txpower.value < 0) + return -EINVAL; + new_power_level = data->txpower.value; + /* + * Debatable, but we cannot do a fixed power + * level above the regulatory constraint. + * Use "iwconfig wlan0 txpower 15dBm" instead. + */ + if (new_power_level > chan->max_power) + return -EINVAL; + } else { + /* + * Automatic power level setting, max being the value + * passed in from userland. + */ + if (data->txpower.value < 0) + new_power_level = -1; + else + new_power_level = data->txpower.value; + } + + reconf = true; - local->user_power_level = new_power_level; - if (local->hw.conf.power_level != new_power_level) - reconf_flags |= IEEE80211_CONF_CHANGE_POWER; + /* + * ieee80211_hw_config() will limit to the channel's + * max power and possibly power constraint from AP. + */ + local->user_power_level = new_power_level; + } if (local->hw.conf.radio_enabled != !(data->txpower.disabled)) { local->hw.conf.radio_enabled = !(data->txpower.disabled); @@ -442,7 +467,7 @@ static int ieee80211_ioctl_siwtxpower(struct net_device *dev, ieee80211_led_radio(local, local->hw.conf.radio_enabled); } - if (reconf_flags) + if (reconf || reconf_flags) ieee80211_hw_config(local, reconf_flags); return 0; -- cgit v1.2.3 From f54930f363113a9357c9ae008965b6484a61cd29 Mon Sep 17 00:00:00 2001 From: Philip Rakity Date: Tue, 7 Apr 2009 12:41:17 -0700 Subject: libertas: don't leak skb on receive error Don't lead memory when receive errors Signed-off-by: Philip Rakity Acked-by: Dan Williams Signed-off-by: John W. Linville --- drivers/net/wireless/libertas/rx.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/wireless/libertas/rx.c b/drivers/net/wireless/libertas/rx.c index 63d7e19ce9b..8e669775cb5 100644 --- a/drivers/net/wireless/libertas/rx.c +++ b/drivers/net/wireless/libertas/rx.c @@ -170,6 +170,7 @@ int lbs_process_rxed_packet(struct lbs_private *priv, struct sk_buff *skb) lbs_deb_rx("rx err: frame received with bad length\n"); dev->stats.rx_length_errors++; ret = 0; + dev_kfree_skb(skb); goto done; } @@ -181,6 +182,7 @@ int lbs_process_rxed_packet(struct lbs_private *priv, struct sk_buff *skb) lbs_pr_alert("rxpd not ok\n"); dev->stats.rx_errors++; ret = 0; + dev_kfree_skb(skb); goto done; } -- cgit v1.2.3 From 02a9a39294017f105aedebcca5f49d552b18dbaa Mon Sep 17 00:00:00 2001 From: Jamie Lentin Date: Tue, 7 Apr 2009 22:59:56 +0100 Subject: at76c50x-usb: Add device ID for OQO model 01+ Add USB device ID for OQO 01+'s internal wireless LAN An OQO employee mentions the chip's true identity here:- ftp://ftp.oqo.com/unsupported/linux/OQOLinux.html Signed-off-by: Jamie Lentin Acked-by: Kalle Valo Signed-off-by: John W. Linville --- drivers/net/wireless/at76c50x-usb.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/wireless/at76c50x-usb.c b/drivers/net/wireless/at76c50x-usb.c index 0c02f1c2bd9..744f4f4dd3d 100644 --- a/drivers/net/wireless/at76c50x-usb.c +++ b/drivers/net/wireless/at76c50x-usb.c @@ -250,6 +250,8 @@ static struct usb_device_id dev_table[] = { { USB_DEVICE(0x03eb, 0x7617), USB_DEVICE_DATA(BOARD_505A) }, /* Siemens Gigaset USB WLAN Adapter 11 */ { USB_DEVICE(0x1690, 0x0701), USB_DEVICE_DATA(BOARD_505A) }, + /* OQO Model 01+ Internal Wi-Fi */ + { USB_DEVICE(0x1557, 0x0002), USB_DEVICE_DATA(BOARD_505A) }, /* * at76c505amx-rfmd */ -- cgit v1.2.3 From 011f5c5bb20c08af93faa8bfd8d611c8cf85134f Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Wed, 8 Apr 2009 10:15:17 -0400 Subject: airo: queue SIOCSIWAUTH-requested auth mode change for next commit Code was clearly wrong, plus callers expect the mode change to happen as soon as possible, not dropped on the floor until the next time some other config value changes and a commit happens. Signed-off-by: Dan Williams Signed-off-by: John W. Linville --- drivers/net/wireless/airo.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c index f21a6171c69..c36d3a3d655 100644 --- a/drivers/net/wireless/airo.c +++ b/drivers/net/wireless/airo.c @@ -6713,11 +6713,11 @@ static int airo_set_auth(struct net_device *dev, local->config.authType = AUTH_ENCRYPT; } else return -EINVAL; - break; /* Commit the changes to flags if needed */ if (local->config.authType != currentAuthType) set_bit (FLAG_COMMIT, &local->flags); + break; } case IW_AUTH_WPA_ENABLED: -- cgit v1.2.3 From 4fc298b86635c60061bbd81cef8de2b031e5c4a7 Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Tue, 24 Mar 2009 21:58:08 +0100 Subject: ar9170: add Cace Airpcap NX usb_id This patch adds a new device to ar9170usb. Reported-by: Mike Kershaw/Dragorn Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville --- drivers/net/wireless/ar9170/usb.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/wireless/ar9170/usb.c b/drivers/net/wireless/ar9170/usb.c index ad296840893..43e8d8de9a5 100644 --- a/drivers/net/wireless/ar9170/usb.c +++ b/drivers/net/wireless/ar9170/usb.c @@ -59,6 +59,8 @@ static struct usb_device_id ar9170_usb_ids[] = { { USB_DEVICE(0x0cf3, 0x9170) }, /* Atheros TG121N */ { USB_DEVICE(0x0cf3, 0x1001) }, + /* Cace Airpcap NX */ + { USB_DEVICE(0xcace, 0x0300) }, /* D-Link DWA 160A */ { USB_DEVICE(0x07d1, 0x3c10) }, /* Netgear WNDA3100 */ -- cgit v1.2.3 From e3062403f5f71c48cf26e791e576f4feca4c9c0f Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Sun, 29 Mar 2009 22:50:28 +0200 Subject: p54usb: add Telsey 802.11g USB2.0 Adapter Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville --- drivers/net/wireless/p54/p54usb.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/p54/p54usb.c b/drivers/net/wireless/p54/p54usb.c index da6640afc83..6cc6cbc9234 100644 --- a/drivers/net/wireless/p54/p54usb.c +++ b/drivers/net/wireless/p54/p54usb.c @@ -71,6 +71,7 @@ static struct usb_device_id p54u_table[] __devinitdata = { {USB_DEVICE(0x1260, 0xee22)}, /* SMC 2862W-G version 2 */ {USB_DEVICE(0x13b1, 0x000a)}, /* Linksys WUSB54G ver 2 */ {USB_DEVICE(0x13B1, 0x000C)}, /* Linksys WUSB54AG */ + {USB_DEVICE(0x1413, 0x5400)}, /* Telsey 802.11g USB2.0 Adapter */ {USB_DEVICE(0x1435, 0x0427)}, /* Inventel UR054G */ {USB_DEVICE(0x2001, 0x3704)}, /* DLink DWL-G122 rev A2 */ {USB_DEVICE(0x413c, 0x8102)}, /* Spinnaker DUT */ -- cgit v1.2.3 From 6aabd4c4441133836ac969a9488458b37f83b677 Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Sat, 28 Mar 2009 20:52:14 +0100 Subject: rt2x00: Add rt73usb USB IDs Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt73usb.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c index 420fff42c0d..853b2b279b6 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.c +++ b/drivers/net/wireless/rt2x00/rt73usb.c @@ -2369,6 +2369,8 @@ static struct usb_device_id rt73usb_device_table[] = { /* Buffalo */ { USB_DEVICE(0x0411, 0x00d8), USB_DEVICE_DATA(&rt73usb_ops) }, { USB_DEVICE(0x0411, 0x00f4), USB_DEVICE_DATA(&rt73usb_ops) }, + { USB_DEVICE(0x0411, 0x0116), USB_DEVICE_DATA(&rt73usb_ops) }, + { USB_DEVICE(0x0411, 0x0119), USB_DEVICE_DATA(&rt73usb_ops) }, /* CNet */ { USB_DEVICE(0x1371, 0x9022), USB_DEVICE_DATA(&rt73usb_ops) }, { USB_DEVICE(0x1371, 0x9032), USB_DEVICE_DATA(&rt73usb_ops) }, -- cgit v1.2.3 From 591f3dc200abb2100c473248a121ce14bfeeabd6 Mon Sep 17 00:00:00 2001 From: Michael Buesch Date: Tue, 31 Mar 2009 12:27:32 +0200 Subject: b43: Do radio lock assertion in software The assertion of the lock-bit in the hardware register is unreliable, because there are devices with quirks that will randomly set the bit. Do the assertion in software, only. Signed-off-by: Michael Buesch Signed-off-by: John W. Linville --- drivers/net/wireless/b43/main.c | 5 +++++ drivers/net/wireless/b43/phy_common.c | 16 ++++++++++++---- drivers/net/wireless/b43/phy_common.h | 4 +++- 3 files changed, 20 insertions(+), 5 deletions(-) diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index 4896e083111..79b685e300c 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -3974,6 +3974,11 @@ static void setup_struct_phy_for_init(struct b43_wldev *dev, phy->next_txpwr_check_time = jiffies; /* PHY TX errors counter. */ atomic_set(&phy->txerr_cnt, B43_PHY_TX_BADNESS_LIMIT); + +#if B43_DEBUG + phy->phy_locked = 0; + phy->radio_locked = 0; +#endif } static void setup_struct_wldev_for_init(struct b43_wldev *dev) diff --git a/drivers/net/wireless/b43/phy_common.c b/drivers/net/wireless/b43/phy_common.c index 026b61c03fb..e176b6e0d9c 100644 --- a/drivers/net/wireless/b43/phy_common.c +++ b/drivers/net/wireless/b43/phy_common.c @@ -131,12 +131,16 @@ void b43_radio_lock(struct b43_wldev *dev) { u32 macctl; +#if B43_DEBUG + B43_WARN_ON(dev->phy.radio_locked); + dev->phy.radio_locked = 1; +#endif + macctl = b43_read32(dev, B43_MMIO_MACCTL); - B43_WARN_ON(macctl & B43_MACCTL_RADIOLOCK); macctl |= B43_MACCTL_RADIOLOCK; b43_write32(dev, B43_MMIO_MACCTL, macctl); - /* Commit the write and wait for the device - * to exit any radio register access. */ + /* Commit the write and wait for the firmware + * to finish any radio register access. */ b43_read32(dev, B43_MMIO_MACCTL); udelay(10); } @@ -145,11 +149,15 @@ void b43_radio_unlock(struct b43_wldev *dev) { u32 macctl; +#if B43_DEBUG + B43_WARN_ON(!dev->phy.radio_locked); + dev->phy.radio_locked = 0; +#endif + /* Commit any write */ b43_read16(dev, B43_MMIO_PHY_VER); /* unlock */ macctl = b43_read32(dev, B43_MMIO_MACCTL); - B43_WARN_ON(!(macctl & B43_MACCTL_RADIOLOCK)); macctl &= ~B43_MACCTL_RADIOLOCK; b43_write32(dev, B43_MMIO_MACCTL, macctl); } diff --git a/drivers/net/wireless/b43/phy_common.h b/drivers/net/wireless/b43/phy_common.h index c9f5430d1d7..b2d99101947 100644 --- a/drivers/net/wireless/b43/phy_common.h +++ b/drivers/net/wireless/b43/phy_common.h @@ -245,8 +245,10 @@ struct b43_phy { atomic_t txerr_cnt; #ifdef CONFIG_B43_DEBUG - /* PHY registers locked by b43_phy_lock()? */ + /* PHY registers locked (w.r.t. firmware) */ bool phy_locked; + /* Radio registers locked (w.r.t. firmware) */ + bool radio_locked; #endif /* B43_DEBUG */ }; -- cgit v1.2.3 From a860402d8f1756dae48cdcabe153c974116fc37e Mon Sep 17 00:00:00 2001 From: Michael Buesch Date: Wed, 15 Apr 2009 14:41:22 -0400 Subject: mac80211: quiet beacon loss messages On Sunday 05 April 2009 11:29:38 Michael Buesch wrote: > On Sunday 05 April 2009 11:23:59 Jaswinder Singh Rajput wrote: > > With latest linus tree I am getting, .config file attached: > > > > [ 22.895051] r8169: eth0: link down > > [ 22.897564] ADDRCONF(NETDEV_UP): eth0: link is not ready > > [ 22.928047] ADDRCONF(NETDEV_UP): wlan0: link is not ready > > [ 22.982292] libvirtd used greatest stack depth: 4200 bytes left > > [ 63.709879] wlan0: authenticate with AP 00:11:95:9e:df:f6 > > [ 63.712096] wlan0: authenticated > > [ 63.712127] wlan0: associate with AP 00:11:95:9e:df:f6 > > [ 63.726831] wlan0: RX AssocResp from 00:11:95:9e:df:f6 (capab=0x471 status=0 aid=1) > > [ 63.726855] wlan0: associated > > [ 63.730093] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready > > [ 74.296087] wlan0: no IPv6 routers present > > [ 79.349044] wlan0: beacon loss from AP 00:11:95:9e:df:f6 - sending probe request > > [ 119.358200] wlan0: beacon loss from AP 00:11:95:9e:df:f6 - sending probe request > > [ 179.354292] wlan0: beacon loss from AP 00:11:95:9e:df:f6 - sending probe request > > [ 259.366044] wlan0: beacon loss from AP 00:11:95:9e:df:f6 - sending probe request > > [ 359.348292] wlan0: beacon loss from AP 00:11:95:9e:df:f6 - sending probe request > > [ 361.953459] packagekitd used greatest stack depth: 4160 bytes left > > [ 478.824258] wlan0: beacon loss from AP 00:11:95:9e:df:f6 - sending probe request > > [ 598.813343] wlan0: beacon loss from AP 00:11:95:9e:df:f6 - sending probe request > > [ 718.817292] wlan0: beacon loss from AP 00:11:95:9e:df:f6 - sending probe request > > [ 838.824567] wlan0: beacon loss from AP 00:11:95:9e:df:f6 - sending probe request > > [ 958.815402] wlan0: beacon loss from AP 00:11:95:9e:df:f6 - sending probe request > > [ 1078.848434] wlan0: beacon loss from AP 00:11:95:9e:df:f6 - sending probe request > > [ 1198.822913] wlan0: beacon loss from AP 00:11:95:9e:df:f6 - sending probe request > > [ 1318.824931] wlan0: beacon loss from AP 00:11:95:9e:df:f6 - sending probe request > > [ 1438.814157] wlan0: beacon loss from AP 00:11:95:9e:df:f6 - sending probe request > > [ 1558.827336] wlan0: beacon loss from AP 00:11:95:9e:df:f6 - sending probe request > > [ 1678.823011] wlan0: beacon loss from AP 00:11:95:9e:df:f6 - sending probe request > > [ 1798.830589] wlan0: beacon loss from AP 00:11:95:9e:df:f6 - sending probe request > > [ 1918.828044] wlan0: beacon loss from AP 00:11:95:9e:df:f6 - sending probe request > > [ 2038.827224] wlan0: beacon loss from AP 00:11:95:9e:df:f6 - sending probe request > > [ 2116.517152] wlan0: beacon loss from AP 00:11:95:9e:df:f6 - sending probe request > > [ 2158.840243] wlan0: beacon loss from AP 00:11:95:9e:df:f6 - sending probe request > > [ 2278.827427] wlan0: beacon loss from AP 00:11:95:9e:df:f6 - sending probe request > > > I think this message should only show if CONFIG_MAC80211_VERBOSE_DEBUG is set. > It's kind of expected that we lose a beacon once in a while, so we shouldn't print > verbose messages to the kernel log (even if they are KERN_DEBUG). > > And besides that, I think one can easily remotely trigger this message and flood the logs. > So it should probably _also_ be ratelimited. Something like this: Signed-off-by: Michael Buesch --- net/mac80211/mlme.c | 20 ++++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-) diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 7ecda9d59d8..1b14d0204dd 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -945,9 +945,13 @@ void ieee80211_beacon_loss_work(struct work_struct *work) u.mgd.beacon_loss_work); struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; - printk(KERN_DEBUG "%s: driver reports beacon loss from AP %pM " - "- sending probe request\n", sdata->dev->name, - sdata->u.mgd.bssid); +#ifdef CONFIG_MAC80211_VERBOSE_DEBUG + if (net_ratelimit()) { + printk(KERN_DEBUG "%s: driver reports beacon loss from AP %pM " + "- sending probe request\n", sdata->dev->name, + sdata->u.mgd.bssid); + } +#endif ifmgd->flags |= IEEE80211_STA_PROBEREQ_POLL; ieee80211_send_probe_req(sdata, ifmgd->bssid, ifmgd->ssid, @@ -1007,9 +1011,13 @@ static void ieee80211_associated(struct ieee80211_sub_if_data *sdata) (local->hw.conf.flags & IEEE80211_CONF_PS)) && time_after(jiffies, ifmgd->last_beacon + IEEE80211_MONITORING_INTERVAL)) { - printk(KERN_DEBUG "%s: beacon loss from AP %pM " - "- sending probe request\n", - sdata->dev->name, ifmgd->bssid); +#ifdef CONFIG_MAC80211_VERBOSE_DEBUG + if (net_ratelimit()) { + printk(KERN_DEBUG "%s: beacon loss from AP %pM " + "- sending probe request\n", + sdata->dev->name, ifmgd->bssid); + } +#endif ifmgd->flags |= IEEE80211_STA_PROBEREQ_POLL; ieee80211_send_probe_req(sdata, ifmgd->bssid, ifmgd->ssid, ifmgd->ssid_len, NULL, 0); -- cgit v1.2.3 From d60cc91acdc45f234d8830409203f504d03513c9 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 9 Apr 2009 09:56:02 +0200 Subject: fix iwl3945 registration regression I forgot that iwl3945 registration is separate from iwlagn. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl3945-base.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index ce729281ff6..8d738d75248 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -4913,6 +4913,8 @@ static int iwl3945_setup_mac(struct iwl_priv *priv) hw->wiphy->custom_regulatory = true; + hw->wiphy->max_scan_ssids = 1; /* WILL FIX */ + /* Default value; 4 EDCA QOS priorities */ hw->queues = 4; -- cgit v1.2.3 From f05faa31c387fb07f4c561350f00ba12cf673c9f Mon Sep 17 00:00:00 2001 From: Herton Ronaldo Krzesinski Date: Fri, 10 Apr 2009 18:05:14 -0300 Subject: rt2x00: prevent double kfree when failing to register hardware MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In a scenario where there isn't any firmware available, we will have a double kfree of rt2x00dev->spec.channels_info when ieee80211_register_hw returns an error status inside rt2x00lib_probe_hw. The problem is that if ieee80211_register_hw fails, we call rt2x00lib_remove_hw twice: * first inside rt2x00lib_probe_hw upon failure of ieee80211_register_hw * error status is returned to rt2x00lib_probe_dev, which then sees it and calls in this case rt2x00lib_remove_dev that will again run rt2x00lib_remove_hw Prevent this avoiding calling rt2x00lib_remove_hw inside rt2x00lib_probe_hw Problem was detected with CONFIG_DEBUG_PAGEALLOC=y, CONFIG_SLUB_DEBUG=y, CONFIG_SLUB_DEBUG_ON=y, that dumps this with no firmware available: rt61pci 0000:00:07.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 wmaster0 (rt61pci): not using net_device_ops yet phy0: Selected rate control algorithm 'pid' phy0: Failed to initialize wep: -2 phy0 -> rt2x00lib_probe_dev: Error - Failed to initialize hw. ============================================================================= BUG kmalloc-128: Object already free ----------------------------------------------------------------------------- INFO: Allocated in rt61pci_probe_hw+0x3e5/0x6e0 [rt61pci] age=340 cpu=0 pid=21 INFO: Freed in rt2x00lib_remove_hw+0x59/0x70 [rt2x00lib] age=0 cpu=0 pid=21 INFO: Slab 0xc13ac3e0 objects=23 used=10 fp=0xdd59f6e0 flags=0x400000c3 INFO: Object 0xdd59f6e0 @offset=1760 fp=0xdd59f790 Bytes b4 0xdd59f6d0: 15 00 00 00 b2 8a fb ff 5a 5a 5a 5a 5a 5a 5a 5a ....².ûÿZZZZZZZZ Object 0xdd59f6e0: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object 0xdd59f6f0: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object 0xdd59f700: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object 0xdd59f710: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object 0xdd59f720: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object 0xdd59f730: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object 0xdd59f740: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object 0xdd59f750: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b a5 kkkkkkkkkkkkkkk¥ Redzone 0xdd59f760: bb bb bb bb »»»» Padding 0xdd59f788: 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZ Pid: 21, comm: stage1 Not tainted 2.6.29.1-desktop-1.1mnb #1 Call Trace: [] print_trailer+0xd3/0x120 [] object_err+0x37/0x50 [] __slab_free+0xe7/0x2f0 [] kfree+0x7e/0xd0 [] ? rt2x00lib_remove_hw+0x59/0x70 [rt2x00lib] [] ? rt2x00lib_remove_hw+0x59/0x70 [rt2x00lib] [] rt2x00lib_remove_hw+0x59/0x70 [rt2x00lib] [] rt2x00lib_remove_dev+0x37/0x50 [rt2x00lib] [] rt2x00lib_probe_dev+0x1a7/0x3b0 [rt2x00lib] [] rt2x00pci_probe+0xdf/0x1ee [rt2x00pci] [] local_pci_probe+0xe/0x10 [] pci_device_probe+0x60/0x80 [] driver_probe_device+0x9a/0x2e0 [] __driver_attach+0x89/0x90 [] bus_for_each_dev+0x4b/0x70 [] ? pci_device_remove+0x0/0x40 [] driver_attach+0x19/0x20 [] ? __driver_attach+0x0/0x90 [] bus_add_driver+0x1cf/0x2a0 [] ? pci_device_remove+0x0/0x40 [] driver_register+0x69/0x140 [] __pci_register_driver+0x40/0x80 [] ? rt61pci_init+0x0/0x19 [rt61pci] [] rt61pci_init+0x17/0x19 [rt61pci] [] do_one_initcall+0x26/0x1c0 [] ? slab_pad_check+0x3c/0x120 [] ? slab_pad_check+0x3c/0x120 [] ? check_object+0xda/0x210 [] ? percpu_free+0x46/0x50 [] ? __slab_free+0x22e/0x2f0 [] ? percpu_free+0x46/0x50 [] ? percpu_free+0x46/0x50 [] ? percpu_free+0x46/0x50 [] ? stop_machine_destroy+0x3c/0x40 [] ? load_module+0xa5/0x1c50 [] ? rt61pci_eepromregister_read+0x0/0x40 [rt61pci] [] ? rt2x00pci_write_tx_data+0x0/0x90 [rt2x00pci] [] ? mutex_lock+0xb/0x20 [] ? mutex_lock+0xb/0x20 [] ? tracepoint_update_probe_range+0x76/0xa0 [] ? tracepoint_module_notify+0x2f/0x40 [] ? notifier_call_chain+0x2d/0x70 [] ? __blocking_notifier_call_chain+0x4d/0x60 [] ? blocking_notifier_call_chain+0x1a/0x20 [] sys_init_module+0x96/0x1d0 [] ? sys_munmap+0x46/0x60 [] syscall_call+0x7/0xb FIX kmalloc-128: Object at 0xdd59f6e0 not freed rt61pci 0000:00:07.0: PCI INT A disabled rt61pci: probe of 0000:00:07.0 failed with error -2 Signed-off-by: Herton Ronaldo Krzesinski Acked-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00dev.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index 05f94e21b42..5752aaae906 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -646,10 +646,8 @@ static int rt2x00lib_probe_hw(struct rt2x00_dev *rt2x00dev) * Register HW. */ status = ieee80211_register_hw(rt2x00dev->hw); - if (status) { - rt2x00lib_remove_hw(rt2x00dev); + if (status) return status; - } set_bit(DEVICE_STATE_REGISTERED_HW, &rt2x00dev->flags); -- cgit v1.2.3 From 23a99840d571a237845fd0906bce78e7c76be650 Mon Sep 17 00:00:00 2001 From: Gerrit Renker Date: Tue, 14 Apr 2009 06:32:56 +0200 Subject: mac80211: Fragmentation threshold (typo) mac80211: Fragmentation threshold (typo) ieee80211_ioctl_siwfrag() sets the fragmentation_threshold to 2352 when frame fragmentation is to be disabled, yet the corresponding 'get' function tests for 2353 bytes instead. This causes user-space tools to display a fragmentation threshold of 2352 bytes even if fragmentation has been disabled. Signed-off-by: Gerrit Renker Signed-off-by: John W. Linville --- net/mac80211/wext.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/mac80211/wext.c b/net/mac80211/wext.c index ce9115c1815..959aa8379cc 100644 --- a/net/mac80211/wext.c +++ b/net/mac80211/wext.c @@ -555,7 +555,7 @@ static int ieee80211_ioctl_giwfrag(struct net_device *dev, struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); frag->value = local->fragmentation_threshold; - frag->disabled = (frag->value >= IEEE80211_MAX_RTS_THRESHOLD); + frag->disabled = (frag->value >= IEEE80211_MAX_FRAG_THRESHOLD); frag->fixed = 1; return 0; -- cgit v1.2.3 From 91fe9ca74e8220f17e2fa71a92cda330857daac4 Mon Sep 17 00:00:00 2001 From: Pavel Roskin Date: Thu, 9 Apr 2009 21:41:05 -0400 Subject: orinoco: correct timeout logic in __orinoco_hw_set_tkip_key() If the value read from HERMES_RID_TXQUEUEEMPTY becomes 0 after exactly 100 readings, we wrongly consider it a timeout. Rewrite the clever while loop as a for loop that does the right thing and looks simpler. Reported by Juha Leppanen Signed-off-by: Pavel Roskin Signed-off-by: John W. Linville --- drivers/net/wireless/orinoco/hw.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/drivers/net/wireless/orinoco/hw.c b/drivers/net/wireless/orinoco/hw.c index 081428d9409..632fac86a30 100644 --- a/drivers/net/wireless/orinoco/hw.c +++ b/drivers/net/wireless/orinoco/hw.c @@ -372,15 +372,13 @@ int __orinoco_hw_set_tkip_key(hermes_t *hw, int key_idx, int set_tx, } /* Wait upto 100ms for tx queue to empty */ - k = 100; - do { - k--; + for (k = 100; k > 0; k--) { udelay(1000); ret = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_TXQUEUEEMPTY, &xmitting); - if (ret) + if (ret || !xmitting) break; - } while ((k > 0) && xmitting); + } if (k == 0) ret = -ETIMEDOUT; -- cgit v1.2.3 From 1269fa737f21b3f643e4b12d3ac9938b142a7f00 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 10 Apr 2009 10:02:45 +0200 Subject: ar9170: fix struct layout on arm arm will pad even between u8's, so mark the structs/unions packed. Fixes a build bug on arm due to BUILD_BUG_ON tests in the code. Signed-off-by: Johannes Berg Reported-by: Al Viro Signed-off-by: John W. Linville --- drivers/net/wireless/ar9170/hw.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/ar9170/hw.h b/drivers/net/wireless/ar9170/hw.h index 13091bd9d81..53e250a4278 100644 --- a/drivers/net/wireless/ar9170/hw.h +++ b/drivers/net/wireless/ar9170/hw.h @@ -310,7 +310,7 @@ struct ar9170_tx_control { struct ar9170_rx_head { u8 plcp[12]; -}; +} __packed; struct ar9170_rx_tail { union { @@ -318,16 +318,16 @@ struct ar9170_rx_tail { u8 rssi_ant0, rssi_ant1, rssi_ant2, rssi_ant0x, rssi_ant1x, rssi_ant2x, rssi_combined; - }; + } __packed; u8 rssi[7]; - }; + } __packed; u8 evm_stream0[6], evm_stream1[6]; u8 phy_err; u8 SAidx, DAidx; u8 error; u8 status; -}; +} __packed; #define AR9170_ENC_ALG_NONE 0x0 #define AR9170_ENC_ALG_WEP64 0x1 -- cgit v1.2.3 From 412401029259b1ad67559cec93bcc7ee4a9551aa Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Thu, 16 Apr 2009 09:58:44 -0600 Subject: powerpc/5200: Bring the legacy fsl_spi_platform_data hooks back In commit 364fdbc00fbdd409ade63500710123fe323aa164 ("spi_mpc83xx: rework chip selects handling"), I merged activate_cs and deactivate_cs hooks into cs_control, but I overlooked that mpc52xx_psc_spi driver is using these hooks too. And that resulted in the following build failure: CC drivers/spi/mpc52xx_psc_spi.o drivers/spi/mpc52xx_psc_spi.c: In function 'mpc52xx_psc_spi_do_probe': drivers/spi/mpc52xx_psc_spi.c:398: error: 'struct fsl_spi_platform_data' has no member named 'activate_cs' drivers/spi/mpc52xx_psc_spi.c:399: error: 'struct fsl_spi_platform_data' has no member named 'deactivate_cs' make[2]: *** [drivers/spi/mpc52xx_psc_spi.o] Error 1 This patch simply adds the legacy hooks back for 2.6.30, and for 2.6.31 we'll convert the driver to ->cs_control. Reported-by: Subrata Modak Signed-off-by: Anton Vorontsov Signed-off-by: Grant Likely --- include/linux/fsl_devices.h | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/include/linux/fsl_devices.h b/include/linux/fsl_devices.h index f2a78b5e8b5..0cde1806cfa 100644 --- a/include/linux/fsl_devices.h +++ b/include/linux/fsl_devices.h @@ -83,6 +83,10 @@ struct fsl_spi_platform_data { u16 max_chipselect; void (*cs_control)(struct spi_device *spi, bool on); u32 sysclk; + + /* Legacy hooks, used by mpc52xx_psc_spi driver. */ + void (*activate_cs)(u8 cs, u8 polarity); + void (*deactivate_cs)(u8 cs, u8 polarity); }; struct mpc8xx_pcmcia_ops { -- cgit v1.2.3 From 98d500d66cb7940747b424b245fc6a51ecfbf005 Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Thu, 16 Apr 2009 18:33:01 +0200 Subject: netfilter: nf_nat: add support for persistent mappings The removal of the SAME target accidentally removed one feature that is not available from the normal NAT targets so far, having multi-range mappings that use the same mapping for each connection from a single client. The current behaviour is to choose the address from the range based on source and destination IP, which breaks when communicating with sites having multiple addresses that require all connections to originate from the same IP address. Introduce a IP_NAT_RANGE_PERSISTENT option that controls whether the destination address is taken into account for selecting addresses. http://bugzilla.kernel.org/show_bug.cgi?id=12954 Signed-off-by: Patrick McHardy --- include/net/netfilter/nf_nat.h | 1 + net/ipv4/netfilter/nf_nat_core.c | 3 ++- 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/include/net/netfilter/nf_nat.h b/include/net/netfilter/nf_nat.h index 9dc1039ff78..8df0b7f7fc6 100644 --- a/include/net/netfilter/nf_nat.h +++ b/include/net/netfilter/nf_nat.h @@ -18,6 +18,7 @@ enum nf_nat_manip_type #define IP_NAT_RANGE_MAP_IPS 1 #define IP_NAT_RANGE_PROTO_SPECIFIED 2 #define IP_NAT_RANGE_PROTO_RANDOM 4 +#define IP_NAT_RANGE_PERSISTENT 8 /* NAT sequence number modifications */ struct nf_nat_seq { diff --git a/net/ipv4/netfilter/nf_nat_core.c b/net/ipv4/netfilter/nf_nat_core.c index fe65187810f..3229e0a81ba 100644 --- a/net/ipv4/netfilter/nf_nat_core.c +++ b/net/ipv4/netfilter/nf_nat_core.c @@ -211,7 +211,8 @@ find_best_ips_proto(struct nf_conntrack_tuple *tuple, minip = ntohl(range->min_ip); maxip = ntohl(range->max_ip); j = jhash_2words((__force u32)tuple->src.u3.ip, - (__force u32)tuple->dst.u3.ip, 0); + range->flags & IP_NAT_RANGE_PERSISTENT ? + (__force u32)tuple->dst.u3.ip : 0, 0); j = ((u64)j * (maxip - minip + 1)) >> 32; *var_ipp = htonl(minip + j); } -- cgit v1.2.3 From efcc2da3fd148c9acb7d7cf1d9800e0649f950fc Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Thu, 16 Apr 2009 15:11:54 -0600 Subject: powerpc/of-device-tree: Factor MTD physmap bindings out of booting-without-of It's easier to find bindings descriptions in separate files. So factor out the MTD physmap bindings into a separate file to not clutter booting-without-of.txt more. Signed-off-by: Stefan Roese Signed-off-by: Grant Likely --- Documentation/powerpc/booting-without-of.txt | 89 +++------------------- Documentation/powerpc/dts-bindings/mtd-physmap.txt | 63 +++++++++++++++ 2 files changed, 75 insertions(+), 77 deletions(-) create mode 100644 Documentation/powerpc/dts-bindings/mtd-physmap.txt diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt index 0ab0230cbcb..d16b7a1c379 100644 --- a/Documentation/powerpc/booting-without-of.txt +++ b/Documentation/powerpc/booting-without-of.txt @@ -43,12 +43,11 @@ Table of Contents 2) Representing devices without a current OF specification a) PHY nodes b) Interrupt controllers - c) CFI or JEDEC memory-mapped NOR flash - d) 4xx/Axon EMAC ethernet nodes - e) Xilinx IP cores - f) USB EHCI controllers - g) MDIO on GPIOs - h) SPI busses + c) 4xx/Axon EMAC ethernet nodes + d) Xilinx IP cores + e) USB EHCI controllers + f) MDIO on GPIOs + g) SPI busses VII - Marvell Discovery mv64[345]6x System Controller chips 1) The /system-controller node @@ -999,7 +998,7 @@ compatibility. translation of SOC addresses for memory mapped SOC registers. - bus-frequency: Contains the bus frequency for the SOC node. Typically, the value of this field is filled in by the boot - loader. + loader. Recommended properties: @@ -1287,71 +1286,7 @@ platforms are moved over to use the flattened-device-tree model. device_type = "open-pic"; }; - c) CFI or JEDEC memory-mapped NOR flash - - Flash chips (Memory Technology Devices) are often used for solid state - file systems on embedded devices. - - - compatible : should contain the specific model of flash chip(s) - used, if known, followed by either "cfi-flash" or "jedec-flash" - - reg : Address range of the flash chip - - bank-width : Width (in bytes) of the flash bank. Equal to the - device width times the number of interleaved chips. - - device-width : (optional) Width of a single flash chip. If - omitted, assumed to be equal to 'bank-width'. - - #address-cells, #size-cells : Must be present if the flash has - sub-nodes representing partitions (see below). In this case - both #address-cells and #size-cells must be equal to 1. - - For JEDEC compatible devices, the following additional properties - are defined: - - - vendor-id : Contains the flash chip's vendor id (1 byte). - - device-id : Contains the flash chip's device id (1 byte). - - In addition to the information on the flash bank itself, the - device tree may optionally contain additional information - describing partitions of the flash address space. This can be - used on platforms which have strong conventions about which - portions of the flash are used for what purposes, but which don't - use an on-flash partition table such as RedBoot. - - Each partition is represented as a sub-node of the flash device. - Each node's name represents the name of the corresponding - partition of the flash device. - - Flash partitions - - reg : The partition's offset and size within the flash bank. - - label : (optional) The label / name for this flash partition. - If omitted, the label is taken from the node name (excluding - the unit address). - - read-only : (optional) This parameter, if present, is a hint to - Linux that this flash partition should only be mounted - read-only. This is usually used for flash partitions - containing early-boot firmware images or data which should not - be clobbered. - - Example: - - flash@ff000000 { - compatible = "amd,am29lv128ml", "cfi-flash"; - reg = ; - bank-width = <4>; - device-width = <1>; - #address-cells = <1>; - #size-cells = <1>; - fs@0 { - label = "fs"; - reg = <0 f80000>; - }; - firmware@f80000 { - label ="firmware"; - reg = ; - read-only; - }; - }; - - d) 4xx/Axon EMAC ethernet nodes + c) 4xx/Axon EMAC ethernet nodes The EMAC ethernet controller in IBM and AMCC 4xx chips, and also the Axon bridge. To operate this needs to interact with a ths @@ -1499,7 +1434,7 @@ platforms are moved over to use the flattened-device-tree model. available. For Axon: 0x0000012a - e) Xilinx IP cores + d) Xilinx IP cores The Xilinx EDK toolchain ships with a set of IP cores (devices) for use in Xilinx Spartan and Virtex FPGAs. The devices cover the whole range @@ -1761,7 +1696,7 @@ platforms are moved over to use the flattened-device-tree model. listed above, nodes for these devices should include a phy-handle property, and may include other common network device properties like local-mac-address. - + iv) Xilinx Uartlite Xilinx uartlite devices are simple fixed speed serial ports. @@ -1793,7 +1728,7 @@ platforms are moved over to use the flattened-device-tree model. - reg-offset : A value of 3 is required - reg-shift : A value of 2 is required - f) USB EHCI controllers + e) USB EHCI controllers Required properties: - compatible : should be "usb-ehci". @@ -1819,7 +1754,7 @@ platforms are moved over to use the flattened-device-tree model. big-endian; }; - g) MDIO on GPIOs + f) MDIO on GPIOs Currently defined compatibles: - virtual,gpio-mdio @@ -1839,7 +1774,7 @@ platforms are moved over to use the flattened-device-tree model. &qe_pio_c 6>; }; - h) SPI (Serial Peripheral Interface) busses + g) SPI (Serial Peripheral Interface) busses SPI busses can be described with a node for the SPI master device and a set of child nodes for each SPI slave on the bus. For this diff --git a/Documentation/powerpc/dts-bindings/mtd-physmap.txt b/Documentation/powerpc/dts-bindings/mtd-physmap.txt new file mode 100644 index 00000000000..cd474f9aef3 --- /dev/null +++ b/Documentation/powerpc/dts-bindings/mtd-physmap.txt @@ -0,0 +1,63 @@ +CFI or JEDEC memory-mapped NOR flash + +Flash chips (Memory Technology Devices) are often used for solid state +file systems on embedded devices. + + - compatible : should contain the specific model of flash chip(s) + used, if known, followed by either "cfi-flash" or "jedec-flash" + - reg : Address range of the flash chip + - bank-width : Width (in bytes) of the flash bank. Equal to the + device width times the number of interleaved chips. + - device-width : (optional) Width of a single flash chip. If + omitted, assumed to be equal to 'bank-width'. + - #address-cells, #size-cells : Must be present if the flash has + sub-nodes representing partitions (see below). In this case + both #address-cells and #size-cells must be equal to 1. + +For JEDEC compatible devices, the following additional properties +are defined: + + - vendor-id : Contains the flash chip's vendor id (1 byte). + - device-id : Contains the flash chip's device id (1 byte). + +In addition to the information on the flash bank itself, the +device tree may optionally contain additional information +describing partitions of the flash address space. This can be +used on platforms which have strong conventions about which +portions of the flash are used for what purposes, but which don't +use an on-flash partition table such as RedBoot. + +Each partition is represented as a sub-node of the flash device. +Each node's name represents the name of the corresponding +partition of the flash device. + +Flash partitions + - reg : The partition's offset and size within the flash bank. + - label : (optional) The label / name for this flash partition. + If omitted, the label is taken from the node name (excluding + the unit address). + - read-only : (optional) This parameter, if present, is a hint to + Linux that this flash partition should only be mounted + read-only. This is usually used for flash partitions + containing early-boot firmware images or data which should not + be clobbered. + +Example: + + flash@ff000000 { + compatible = "amd,am29lv128ml", "cfi-flash"; + reg = ; + bank-width = <4>; + device-width = <1>; + #address-cells = <1>; + #size-cells = <1>; + fs@0 { + label = "fs"; + reg = <0 f80000>; + }; + firmware@f80000 { + label ="firmware"; + reg = ; + read-only; + }; + }; -- cgit v1.2.3 From c5a88dd90cf243a17c4a8c10e1ed973192ea5825 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Thu, 16 Apr 2009 15:11:54 -0600 Subject: powerpc/device-tree: Document MTD nodes with multiple "reg" tuples Add binding for mtd nodes with multiple reg tuples. Multiple reg tuples are used when the flash region covers multiple devices of the same type, but not necessarily the same size. Signed-off-by: Stefan Roese Signed-off-by: Grant Likely --- Documentation/powerpc/dts-bindings/mtd-physmap.txt | 19 ++++++++++++++++++- 1 file changed, 18 insertions(+), 1 deletion(-) diff --git a/Documentation/powerpc/dts-bindings/mtd-physmap.txt b/Documentation/powerpc/dts-bindings/mtd-physmap.txt index cd474f9aef3..667c9bde869 100644 --- a/Documentation/powerpc/dts-bindings/mtd-physmap.txt +++ b/Documentation/powerpc/dts-bindings/mtd-physmap.txt @@ -5,7 +5,9 @@ file systems on embedded devices. - compatible : should contain the specific model of flash chip(s) used, if known, followed by either "cfi-flash" or "jedec-flash" - - reg : Address range of the flash chip + - reg : Address range(s) of the flash chip(s) + It's possible to (optionally) define multiple "reg" tuples so that + non-identical NOR chips can be described in one flash node. - bank-width : Width (in bytes) of the flash bank. Equal to the device width times the number of interleaved chips. - device-width : (optional) Width of a single flash chip. If @@ -61,3 +63,18 @@ Example: read-only; }; }; + +Here an example with multiple "reg" tuples: + + flash@f0000000,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "intel,PC48F4400P0VB", "cfi-flash"; + reg = <0 0x00000000 0x02000000 + 0 0x02000000 0x02000000>; + bank-width = <2>; + partition@0 { + label = "test-part1"; + reg = <0 0x04000000>; + }; + }; -- cgit v1.2.3 From bda9de2c4fff8d7e9ac3ee66ce853716280a21ea Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Thu, 16 Apr 2009 15:11:54 -0600 Subject: powerpc/5200: Add FLASH nodes to lite5200 device tree Signed-off-by: Grant Likely --- arch/powerpc/boot/dts/lite5200b.dts | 39 +++++++++++++++++++++++++++++++++++++ 1 file changed, 39 insertions(+) diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts index c63e3566479..d13cb11ce62 100644 --- a/arch/powerpc/boot/dts/lite5200b.dts +++ b/arch/powerpc/boot/dts/lite5200b.dts @@ -293,4 +293,43 @@ 0x02000000 0 0xa0000000 0xa0000000 0 0x10000000 0x01000000 0 0x00000000 0xb0000000 0 0x01000000>; }; + + localbus { + compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus"; + + #address-cells = <2>; + #size-cells = <1>; + + ranges = <0 0 0xfe000000 0x02000000>; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x02000000>; + bank-width = <1>; + #size-cells = <1>; + #address-cells = <1>; + + partition@0 { + label = "kernel"; + reg = <0x00000000 0x00200000>; + }; + partition@200000 { + label = "rootfs"; + reg = <0x00200000 0x01d00000>; + }; + partition@1f00000 { + label = "u-boot"; + reg = <0x01f00000 0x00060000>; + }; + partition@1f60000 { + label = "u-boot-env"; + reg = <0x01f60000 0x00020000>; + }; + partition@1f80000 { + label = "dtb"; + reg = <0x01f80000 0x00080000>; + }; + }; + }; + }; -- cgit v1.2.3 From 2238aff5bbd9d928b69e579b4c95842f97da95ba Mon Sep 17 00:00:00 2001 From: Tony Breeds Date: Thu, 16 Apr 2009 16:27:23 -0700 Subject: ixgbe: Be explict with what we are !'ing in ixgbe_sfp_config_module_task() GCC warns: drivers/net/ixgbe/ixgbe_main.c: In function 'ixgbe_sfp_config_module_task': drivers/net/ixgbe/ixgbe_main.c:3920: warning: suggest parantheses around operand of '!' or change '&' to '&&' or '!' to '~' Which I think is right. Bracket to remove ambiguity. Signed-off-by: Tony Breeds Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ixgbe/ixgbe_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index febde45cf9f..49a90378456 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -3946,7 +3946,7 @@ static void ixgbe_sfp_config_module_task(struct work_struct *work) } hw->mac.ops.setup_sfp(hw); - if (!adapter->flags & IXGBE_FLAG_IN_SFP_LINK_TASK) + if (!(adapter->flags & IXGBE_FLAG_IN_SFP_LINK_TASK)) /* This will also work for DA Twinax connections */ schedule_work(&adapter->multispeed_fiber_task); adapter->flags &= ~IXGBE_FLAG_IN_SFP_MOD_TASK; -- cgit v1.2.3 From 788873ac70a5f2a5569ad41ef9753763ab270ddf Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Thu, 16 Apr 2009 09:38:45 +0000 Subject: MAINTAINERS - Add section NETWORKING DRIVERS Signed-off-by: Joe Perches Signed-off-by: David S. Miller --- MAINTAINERS | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index abedca58d8b..1ed1fa12b4e 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3962,6 +3962,13 @@ F: net/wireless/ F: include/net/ieee80211* F: include/net/wireless.h +NETWORKING DRIVERS +L: netdev@vger.kernel.org +W: http://www.linuxfoundation.org/en/Net +T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.git +S: Odd Fixes +F: drivers/net/ + NETXEN (1/10) GbE SUPPORT P: Dhananjay Phadke M: dhananjay@netxen.com -- cgit v1.2.3 From b1e8fd54af73116331376a7b3074932a21e7477a Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Thu, 16 Apr 2009 09:38:46 +0000 Subject: MAINTAINERS - Update NETWORKING W: url and standardize T: git url Signed-off-by: Joe Perches Signed-off-by: David S. Miller --- MAINTAINERS | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 1ed1fa12b4e..36ea627dabc 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3920,8 +3920,8 @@ NETWORKING [GENERAL] P: David S. Miller M: davem@davemloft.net L: netdev@vger.kernel.org -W: http://linux-net.osdl.org/ -T: git kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6.git +W: http://www.linuxfoundation.org/en/Net +T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.git S: Maintained F: net/ F: include/net/ -- cgit v1.2.3 From 84971bb401866d79c6b353cb1d8861c2b4621867 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 17 Apr 2009 12:44:25 +0900 Subject: sh: pci: Kill off useless debugging printk() in pci-sh7780 init. Signed-off-by: Paul Mundt --- arch/sh/drivers/pci/pci-sh7780.c | 12 ------------ 1 file changed, 12 deletions(-) diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c index 282cabe15e3..b826c7bc62b 100644 --- a/arch/sh/drivers/pci/pci-sh7780.c +++ b/arch/sh/drivers/pci/pci-sh7780.c @@ -118,18 +118,6 @@ int __init sh7780_pcic_init(struct pci_channel *chan, pci_write_reg(chan, map->window1.base, SH4_PCILAR1); pci_write_reg(chan, map->window1.base, SH7780_PCIMBAR1); - /* Map IO space into PCI IO window: - * IO addresses will be translated to the PCI IO window base address - */ - pr_debug("PCI: Mapping IO address 0x%x - 0x%x to base 0x%lx\n", - chan->io_resource->start, chan->io_resource->end, - chan->io_base + chan->io_resource->start); - - /* NOTE: I'm ignoring the PCI error IRQs for now.. - * TODO: add support for the internal error interrupts and - * DMA interrupts... - */ - /* Apply any last-minute PCIC fixups */ pci_fixup_pcic(chan); -- cgit v1.2.3 From b627b4ed3d056c5d00e8f3cb32d033b0ee6619a9 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 17 Apr 2009 13:00:18 +0900 Subject: sh: pci: Move se7780 INTC fixups out of pci-sh7780.c. These fixups belong in the board INTC setup code, not in the middle of pci-sh7780.c. Signed-off-by: Paul Mundt --- arch/sh/boards/mach-se/7780/irq.c | 10 ++++++++-- arch/sh/drivers/pci/pci-sh7780.c | 24 ------------------------ 2 files changed, 8 insertions(+), 26 deletions(-) diff --git a/arch/sh/boards/mach-se/7780/irq.c b/arch/sh/boards/mach-se/7780/irq.c index 66ad292c9fc..44b61a597a1 100644 --- a/arch/sh/boards/mach-se/7780/irq.c +++ b/arch/sh/boards/mach-se/7780/irq.c @@ -12,10 +12,13 @@ #include #include #include -#include -#include +#include +#include #include +#define INTC_BASE 0xffd00000 +#define INTC_ICR1 (INTC_BASE+0x1c) + /* * Initialize IRQ setting */ @@ -43,4 +46,7 @@ void __init init_se7780_IRQ(void) ctrl_outw((IRQPIN_PCCPW << IRQPOS_PCCPW), FPGA_INTSEL3); plat_irq_setup_pins(IRQ_MODE_IRQ); /* install handlers for IRQ0-7 */ + + /* ICR1: detect low level(for 2ndcut) */ + ctrl_outl(0xAAAA0000, INTC_ICR1); } diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c index b826c7bc62b..45fa423f2e5 100644 --- a/arch/sh/drivers/pci/pci-sh7780.c +++ b/arch/sh/drivers/pci/pci-sh7780.c @@ -22,20 +22,6 @@ #include #include "pci-sh4.h" -#define INTC_BASE 0xffd00000 -#define INTC_ICR0 (INTC_BASE+0x0) -#define INTC_ICR1 (INTC_BASE+0x1c) -#define INTC_INTPRI (INTC_BASE+0x10) -#define INTC_INTREQ (INTC_BASE+0x24) -#define INTC_INTMSK0 (INTC_BASE+0x44) -#define INTC_INTMSK1 (INTC_BASE+0x48) -#define INTC_INTMSK2 (INTC_BASE+0x40080) -#define INTC_INTMSKCLR0 (INTC_BASE+0x64) -#define INTC_INTMSKCLR1 (INTC_BASE+0x68) -#define INTC_INTMSKCLR2 (INTC_BASE+0x40084) -#define INTC_INT2MSKR (INTC_BASE+0x40038) -#define INTC_INT2MSKCR (INTC_BASE+0x4003c) - /* * Initialization. Try all known PCI access methods. Note that we support * using both PCI BIOS and direct access: in such cases, we use I/O ports @@ -75,16 +61,6 @@ int __init sh7780_pci_init(struct pci_channel *chan) return -ENODEV; } - /* Setup the INTC */ - if (mach_is_7780se()) { - /* ICR0: IRL=use separately */ - ctrl_outl(0x00C00020, INTC_ICR0); - /* ICR1: detect low level(for 2ndcut) */ - ctrl_outl(0xAAAA0000, INTC_ICR1); - /* INTPRI: priority=3(all) */ - ctrl_outl(0x33333333, INTC_INTPRI); - } - if ((ret = sh4_pci_check_direct(chan)) != 0) return ret; -- cgit v1.2.3 From 7e4ba0d77c96d328ba968ddff4a464d4d2fa7abc Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 17 Apr 2009 14:07:57 +0900 Subject: sh: pci: Prefer P1SEG over P1SEGADDR for CONFIG_CMD. P1SEGADDR is obsolete and will be killed off completely in the future, so transition off of it and reference P1SEG explicitly. Signed-off-by: Paul Mundt --- arch/sh/drivers/pci/ops-sh4.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/sh/drivers/pci/ops-sh4.c b/arch/sh/drivers/pci/ops-sh4.c index 540683d07c7..2a7f7b50ff0 100644 --- a/arch/sh/drivers/pci/ops-sh4.c +++ b/arch/sh/drivers/pci/ops-sh4.c @@ -1,22 +1,22 @@ /* * Generic SH-4 / SH-4A PCIC operations (SH7751, SH7780). * - * Copyright (C) 2002 - 2006 Paul Mundt + * Copyright (C) 2002 - 2009 Paul Mundt * * This file is subject to the terms and conditions of the GNU General Public * License v2. See the file "COPYING" in the main directory of this archive * for more details. */ #include +#include #include -#include #include "pci-sh4.h" /* * Direct access to PCI hardware... */ #define CONFIG_CMD(bus, devfn, where) \ - P1SEGADDR((bus->number << 16) | (devfn << 8) | (where & ~3)) + (P1SEG | (bus->number << 16) | (devfn << 8) | (where & ~3)) static DEFINE_SPINLOCK(sh4_pci_lock); -- cgit v1.2.3 From 0bbc9bc3189f24de946777af43c9033c8c4871e4 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 17 Apr 2009 14:09:09 +0900 Subject: sh: pci: Set class/sub-class code correctly for SH7780 PCIC. The SH7780 PCI host controller implements a configuration header that requires a fair bit of hand-holding to initialize properly. By default it appears as a pre-2.0 host controller given the zeroed out class code, so fix this up properly. Some boards that happened to be using the R7780RP version of the PCIC fixups had set this correctly, but this belongs in the standard initialization, and is by no means board specific. Signed-off-by: Paul Mundt --- arch/sh/drivers/pci/fixups-sdk7780.c | 4 ---- arch/sh/drivers/pci/pci-sh7780.c | 7 +++---- 2 files changed, 3 insertions(+), 8 deletions(-) diff --git a/arch/sh/drivers/pci/fixups-sdk7780.c b/arch/sh/drivers/pci/fixups-sdk7780.c index c2957312b30..004efd486ee 100644 --- a/arch/sh/drivers/pci/fixups-sdk7780.c +++ b/arch/sh/drivers/pci/fixups-sdk7780.c @@ -16,8 +16,6 @@ int pci_fixup_pcic(struct pci_channel *chan) { - ctrl_outl(0x00000001, SH7780_PCI_VCR2); - /* Enable all interrupts, so we know what to fix */ pci_write_reg(chan, 0x0000C3FF, SH7780_PCIIMR); pci_write_reg(chan, 0x0000380F, SH7780_PCIAINTM); @@ -26,8 +24,6 @@ int pci_fixup_pcic(struct pci_channel *chan) pci_write_reg(chan, 0xFB00, SH7780_PCISTATUS); pci_write_reg(chan, 0x0047, SH7780_PCICMD); pci_write_reg(chan, 0x00, SH7780_PCIPIF); - pci_write_reg(chan, 0x00, SH7780_PCISUB); - pci_write_reg(chan, 0x06, SH7780_PCIBCC); pci_write_reg(chan, 0x1912, SH7780_PCISVID); pci_write_reg(chan, 0x0001, SH7780_PCISID); diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c index 45fa423f2e5..7f4f5903754 100644 --- a/arch/sh/drivers/pci/pci-sh7780.c +++ b/arch/sh/drivers/pci/pci-sh7780.c @@ -72,16 +72,15 @@ int __init sh7780_pcic_init(struct pci_channel *chan, { u32 word; + pci_write_reg(chan, PCI_CLASS_BRIDGE_HOST >> 8, SH7780_PCIBCC); + pci_write_reg(chan, PCI_CLASS_BRIDGE_HOST & 0xff, SH7780_PCISUB); + /* set the command/status bits to: * Wait Cycle Control + Parity Enable + Bus Master + * Mem space enable */ pci_write_reg(chan, 0x00000046, SH7780_PCICMD); - /* define this host as the host bridge */ - word = PCI_BASE_CLASS_BRIDGE << 24; - pci_write_reg(chan, word, SH7780_PCIRID); - /* Set IO and Mem windows to local address * Make PCI and local address the same for easy 1 to 1 mapping */ -- cgit v1.2.3 From 4e7b7fdb129995640f144b7de114e109c6b46a2a Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 17 Apr 2009 15:05:19 +0900 Subject: sh: pci: Rework SH7780 host controller detection. This reworks how the host controller is probed, and makes it a bit more verbose in the event a new type of controller is detected. Additionally, we also log the revision information. This now uses the proper access sizes for the vendor/device registers, rather than relying on a larger access that encapsulated both of them. Not all devices support 32-bit read cycles for these registers. Signed-off-by: Paul Mundt --- arch/sh/drivers/pci/pci-sh7780.c | 42 +++++++++++++++++++++++----------------- arch/sh/drivers/pci/pci-sh7780.h | 5 ++--- 2 files changed, 26 insertions(+), 21 deletions(-) diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c index 7f4f5903754..63b5151e9aa 100644 --- a/arch/sh/drivers/pci/pci-sh7780.c +++ b/arch/sh/drivers/pci/pci-sh7780.c @@ -34,33 +34,39 @@ int __init sh7780_pci_init(struct pci_channel *chan) { unsigned int id; - int ret, match = 0; + const char *type = NULL; + int ret; - pr_debug("PCI: Starting intialization.\n"); + printk(KERN_NOTICE "PCI: Starting intialization.\n"); chan->reg_base = 0xfe040000; chan->io_base = 0xfe200000; - ctrl_outl(0x00000001, SH7780_PCI_VCR2); /* Enable PCIC */ - - /* check for SH7780/SH7780R hardware */ - id = pci_read_reg(chan, SH7780_PCIVID); - if ((id & 0xffff) == SH7780_VENDOR_ID) { - switch ((id >> 16) & 0xffff) { - case SH7763_DEVICE_ID: - case SH7780_DEVICE_ID: - case SH7781_DEVICE_ID: - case SH7785_DEVICE_ID: - match = 1; - break; - } - } + /* Enable CPU access to the PCIC registers. */ + __raw_writel(PCIECR_ENBL, PCIECR); - if (unlikely(!match)) { - printk(KERN_ERR "PCI: This is not an SH7780 (%x)\n", id); + id = __raw_readw(chan->reg_base + SH7780_PCIVID); + if (id != SH7780_VENDOR_ID) { + printk(KERN_ERR "PCI: Unknown vendor ID 0x%04x.\n", id); return -ENODEV; } + id = __raw_readw(chan->reg_base + SH7780_PCIDID); + type = (id == SH7763_DEVICE_ID) ? "SH7763" : + (id == SH7780_DEVICE_ID) ? "SH7780" : + (id == SH7781_DEVICE_ID) ? "SH7781" : + (id == SH7785_DEVICE_ID) ? "SH7785" : + NULL; + if (unlikely(!type)) { + printk(KERN_ERR "PCI: Found an unsupported Renesas host " + "controller, device id 0x%04x.\n", id); + return -EINVAL; + } + + printk(KERN_NOTICE "PCI: Found a Renesas %s host " + "controller, revision %d.\n", type, + __raw_readb(chan->reg_base + SH7780_PCIRID)); + if ((ret = sh4_pci_check_direct(chan)) != 0) return ret; diff --git a/arch/sh/drivers/pci/pci-sh7780.h b/arch/sh/drivers/pci/pci-sh7780.h index fffcf1dcfed..213f1d8c9ca 100644 --- a/arch/sh/drivers/pci/pci-sh7780.h +++ b/arch/sh/drivers/pci/pci-sh7780.h @@ -20,9 +20,8 @@ #define SH7785_DEVICE_ID 0x0007 /* SH7780 Control Registers */ -#define SH7780_PCI_VCR0 0xFE000000 -#define SH7780_PCI_VCR1 0xFE000004 -#define SH7780_PCI_VCR2 0xFE000008 +#define PCIECR 0xFE000008 +#define PCIECR_ENBL 0x01 /* SH7780 Specific Values */ #define SH7780_PCI_CONFIG_BASE 0xFD000000 /* Config space base addr */ -- cgit v1.2.3 From ab78cbcf6877334fc20868b7df7887349e2e01c8 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 17 Apr 2009 15:08:01 +0900 Subject: sh: pci: Use the proper write size for class/sub-class code. Don't use pci_write_reg() for these, as it defaults to 32-bit. Rather than using the helper, use __raw_writeb() directly. Signed-off-by: Paul Mundt --- arch/sh/drivers/pci/pci-sh7780.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c index 63b5151e9aa..19bac2168f4 100644 --- a/arch/sh/drivers/pci/pci-sh7780.c +++ b/arch/sh/drivers/pci/pci-sh7780.c @@ -78,8 +78,10 @@ int __init sh7780_pcic_init(struct pci_channel *chan, { u32 word; - pci_write_reg(chan, PCI_CLASS_BRIDGE_HOST >> 8, SH7780_PCIBCC); - pci_write_reg(chan, PCI_CLASS_BRIDGE_HOST & 0xff, SH7780_PCISUB); + __raw_writeb(PCI_CLASS_BRIDGE_HOST >> 8, + chan->reg_base + SH7780_PCIBCC); + __raw_writeb(PCI_CLASS_BRIDGE_HOST & 0xff, + chan->reg_base + SH7780_PCISUB); /* set the command/status bits to: * Wait Cycle Control + Parity Enable + Bus Master + -- cgit v1.2.3 From c66c1d79a94a7a302e2dc6c93da40902423eac3e Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 17 Apr 2009 16:38:00 +0900 Subject: sh: pci: Set pci_cache_line_size on SH7780 via the PCICLS register. The SH7780 PCIC contains a read-only cache line size register that we can derive pci_cache_line_size from. So, make sure that the software idea of the cache line size actually matches the host controller's idea. Signed-off-by: Paul Mundt --- arch/sh/drivers/pci/pci-sh7780.c | 21 ++++++++++++--------- 1 file changed, 12 insertions(+), 9 deletions(-) diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c index 19bac2168f4..fa73b0d1588 100644 --- a/arch/sh/drivers/pci/pci-sh7780.c +++ b/arch/sh/drivers/pci/pci-sh7780.c @@ -22,15 +22,6 @@ #include #include "pci-sh4.h" -/* - * Initialization. Try all known PCI access methods. Note that we support - * using both PCI BIOS and direct access: in such cases, we use I/O ports - * to access config space. - * - * Note that the platform specific initialization (BSC registers, and memory - * space mapping) will be called via the platform defined function - * pcibios_init_platform(). - */ int __init sh7780_pci_init(struct pci_channel *chan) { unsigned int id; @@ -70,19 +61,31 @@ int __init sh7780_pci_init(struct pci_channel *chan) if ((ret = sh4_pci_check_direct(chan)) != 0) return ret; + /* + * Platform specific initialization (BSC registers, and memory space + * mapping) will be called via the platform defined function + * pcibios_init_platform(). + */ return pcibios_init_platform(); } +extern u8 pci_cache_line_size; + int __init sh7780_pcic_init(struct pci_channel *chan, struct sh4_pci_address_map *map) { u32 word; + /* + * Set the class and sub-class codes. + */ __raw_writeb(PCI_CLASS_BRIDGE_HOST >> 8, chan->reg_base + SH7780_PCIBCC); __raw_writeb(PCI_CLASS_BRIDGE_HOST & 0xff, chan->reg_base + SH7780_PCISUB); + pci_cache_line_size = pci_read_reg(chan, SH7780_PCICLS) / 4; + /* set the command/status bits to: * Wait Cycle Control + Parity Enable + Bus Master + * Mem space enable -- cgit v1.2.3 From f1dcab756687622b658154ded1657538984edcdb Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 17 Apr 2009 17:00:27 +0900 Subject: sh: pci: Set the I/O port base to the SH7780 I/O window default. Presently the I/O port base isn't being set anywhere, which allows things like generic_inl() to blow up. Fix this up to point at the PCI IO window. Signed-off-by: Paul Mundt --- arch/sh/drivers/pci/pci-sh7780.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c index fa73b0d1588..207b7206fbd 100644 --- a/arch/sh/drivers/pci/pci-sh7780.c +++ b/arch/sh/drivers/pci/pci-sh7780.c @@ -112,5 +112,7 @@ int __init sh7780_pcic_init(struct pci_channel *chan, word = SH4_PCICR_PREFIX | SH4_PCICR_CFIN | SH4_PCICR_FTO; pci_write_reg(chan, word, SH4_PCICR); + __set_io_port_base(SH7780_PCI_IO_BASE); + return 0; } -- cgit v1.2.3 From ab1363a8929f32cc163cd3f50ca72f20d901b00c Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 17 Apr 2009 17:07:47 +0900 Subject: sh: pci: Consolidate PCI I/O and mem window definitions for SH7780. This consolidates all of the PCI I/O and memory window definitions across the pci-sh7780 users in pci-sh7780 itself. No functional changes, in that every platform had exactly the same implementation. Signed-off-by: Paul Mundt --- arch/sh/drivers/pci/ops-r7780rp.c | 23 +---------------------- arch/sh/drivers/pci/ops-sdk7780.c | 21 +-------------------- arch/sh/drivers/pci/ops-se7780.c | 23 +---------------------- arch/sh/drivers/pci/ops-sh7785lcr.c | 21 +-------------------- arch/sh/drivers/pci/pci-sh7780.c | 25 ++++++++++++++++++++++--- arch/sh/drivers/pci/pci-sh7780.h | 4 +--- 6 files changed, 27 insertions(+), 90 deletions(-) diff --git a/arch/sh/drivers/pci/ops-r7780rp.c b/arch/sh/drivers/pci/ops-r7780rp.c index 8ec6d225ef9..044525df18c 100644 --- a/arch/sh/drivers/pci/ops-r7780rp.c +++ b/arch/sh/drivers/pci/ops-r7780rp.c @@ -26,27 +26,6 @@ int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) return irq_tab[slot]; } -static struct resource sh7780_io_resource = { - .name = "SH7780_IO", - .start = SH7780_PCI_IO_BASE, - .end = SH7780_PCI_IO_BASE + SH7780_PCI_IO_SIZE - 1, - .flags = IORESOURCE_IO -}; - -static struct resource sh7780_mem_resource = { - .name = "SH7780_mem", - .start = SH7780_PCI_MEMORY_BASE, - .end = SH7780_PCI_MEMORY_BASE + SH7780_PCI_MEM_SIZE - 1, - .flags = IORESOURCE_MEM -}; - -extern struct pci_ops sh7780_pci_ops; - -struct pci_channel board_pci_channels[] = { - { sh7780_pci_init, &sh4_pci_ops, &sh7780_io_resource, &sh7780_mem_resource, 0, 0xff }, - { NULL, NULL, NULL, 0, 0 }, -}; - static struct sh4_pci_address_map sh7780_pci_map = { .window0 = { .base = SH7780_CS2_BASE_ADDR, @@ -61,5 +40,5 @@ static struct sh4_pci_address_map sh7780_pci_map = { int __init pcibios_init_platform(void) { - return sh7780_pcic_init(&board_pci_channels[0], &sh7780_pci_map); + return sh7780_pcic_init(&sh7780_pci_map); } diff --git a/arch/sh/drivers/pci/ops-sdk7780.c b/arch/sh/drivers/pci/ops-sdk7780.c index 6a0b7c06783..570fd71f693 100644 --- a/arch/sh/drivers/pci/ops-sdk7780.c +++ b/arch/sh/drivers/pci/ops-sdk7780.c @@ -34,25 +34,6 @@ int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) return sdk7780_irq_tab[pin-1][slot]; } -static struct resource sdk7780_io_resource = { - .name = "SH7780_IO", - .start = SH7780_PCI_IO_BASE, - .end = SH7780_PCI_IO_BASE + SH7780_PCI_IO_SIZE - 1, - .flags = IORESOURCE_IO -}; - -static struct resource sdk7780_mem_resource = { - .name = "SH7780_mem", - .start = SH7780_PCI_MEMORY_BASE, - .end = SH7780_PCI_MEMORY_BASE + SH7780_PCI_MEM_SIZE - 1, - .flags = IORESOURCE_MEM -}; - -struct pci_channel board_pci_channels[] = { - { sh7780_pci_init, &sh4_pci_ops, &sdk7780_io_resource, &sdk7780_mem_resource, 0, 0xff }, - { NULL, NULL, NULL, 0, 0 }, -}; - static struct sh4_pci_address_map sdk7780_pci_map = { .window0 = { .base = SH7780_CS2_BASE_ADDR, @@ -67,5 +48,5 @@ static struct sh4_pci_address_map sdk7780_pci_map = { int __init pcibios_init_platform(void) { printk(KERN_INFO "SH7780 PCI: Finished initializing PCI controller\n"); - return sh7780_pcic_init(&board_pci_channels[0], &sdk7780_pci_map); + return sh7780_pcic_init(&sdk7780_pci_map); } diff --git a/arch/sh/drivers/pci/ops-se7780.c b/arch/sh/drivers/pci/ops-se7780.c index 583b8e82ff9..8b0941515b0 100644 --- a/arch/sh/drivers/pci/ops-se7780.c +++ b/arch/sh/drivers/pci/ops-se7780.c @@ -41,27 +41,6 @@ int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) return se7780_irq_tab[pin-1][slot]; } -static struct resource se7780_io_resource = { - .name = "SH7780_IO", - .start = SH7780_PCI_IO_BASE, - .end = SH7780_PCI_IO_BASE + SH7780_PCI_IO_SIZE - 1, - .flags = IORESOURCE_IO -}; - -static struct resource se7780_mem_resource = { - .name = "SH7780_mem", - .start = SH7780_PCI_MEMORY_BASE, - .end = SH7780_PCI_MEMORY_BASE + SH7780_PCI_MEM_SIZE - 1, - .flags = IORESOURCE_MEM -}; - -extern struct pci_ops se7780_pci_ops; - -struct pci_channel board_pci_channels[] = { - { sh7780_pci_init, &sh4_pci_ops, &se7780_io_resource, &se7780_mem_resource, 0, 0xff }, - { NULL, NULL, NULL, 0, 0 }, -}; - static struct sh4_pci_address_map se7780_pci_map = { .window0 = { .base = SH7780_CS2_BASE_ADDR, @@ -90,5 +69,5 @@ int __init pcibios_init_platform(void) ctrl_outw(0x0013, FPGA_PCI_INTSEL1); ctrl_outw(0xE402, FPGA_PCI_INTSEL2); - return sh7780_pcic_init(&board_pci_channels[0], &se7780_pci_map); + return sh7780_pcic_init(&se7780_pci_map); } diff --git a/arch/sh/drivers/pci/ops-sh7785lcr.c b/arch/sh/drivers/pci/ops-sh7785lcr.c index ab0d1decf2d..bac46b5d158 100644 --- a/arch/sh/drivers/pci/ops-sh7785lcr.c +++ b/arch/sh/drivers/pci/ops-sh7785lcr.c @@ -26,25 +26,6 @@ int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) return irq_tab[slot]; } -static struct resource sh7785_io_resource = { - .name = "SH7785_IO", - .start = SH7780_PCI_IO_BASE, - .end = SH7780_PCI_IO_BASE + SH7780_PCI_IO_SIZE - 1, - .flags = IORESOURCE_IO -}; - -static struct resource sh7785_mem_resource = { - .name = "SH7785_mem", - .start = SH7780_PCI_MEMORY_BASE, - .end = SH7780_PCI_MEMORY_BASE + SH7780_PCI_MEM_SIZE - 1, - .flags = IORESOURCE_MEM -}; - -struct pci_channel board_pci_channels[] = { - { sh7780_pci_init, &sh4_pci_ops, &sh7785_io_resource, &sh7785_mem_resource, 0, 0xff }, - { NULL, NULL, NULL, 0, 0 }, -}; - static struct sh4_pci_address_map sh7785_pci_map = { .window0 = { #if defined(CONFIG_32BIT) @@ -59,5 +40,5 @@ static struct sh4_pci_address_map sh7785_pci_map = { int __init pcibios_init_platform(void) { - return sh7780_pcic_init(&board_pci_channels[0], &sh7785_pci_map); + return sh7780_pcic_init(&sh7785_pci_map); } diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c index 207b7206fbd..eb217ddf025 100644 --- a/arch/sh/drivers/pci/pci-sh7780.c +++ b/arch/sh/drivers/pci/pci-sh7780.c @@ -22,7 +22,7 @@ #include #include "pci-sh4.h" -int __init sh7780_pci_init(struct pci_channel *chan) +static int __init sh7780_pci_init(struct pci_channel *chan) { unsigned int id; const char *type = NULL; @@ -71,9 +71,28 @@ int __init sh7780_pci_init(struct pci_channel *chan) extern u8 pci_cache_line_size; -int __init sh7780_pcic_init(struct pci_channel *chan, - struct sh4_pci_address_map *map) +static struct resource sh7785_io_resource = { + .name = "SH7785_IO", + .start = SH7780_PCI_IO_BASE, + .end = SH7780_PCI_IO_BASE + SH7780_PCI_IO_SIZE - 1, + .flags = IORESOURCE_IO +}; + +static struct resource sh7785_mem_resource = { + .name = "SH7785_mem", + .start = SH7780_PCI_MEMORY_BASE, + .end = SH7780_PCI_MEMORY_BASE + SH7780_PCI_MEM_SIZE - 1, + .flags = IORESOURCE_MEM +}; + +struct pci_channel board_pci_channels[] = { + { sh7780_pci_init, &sh4_pci_ops, &sh7785_io_resource, &sh7785_mem_resource, 0, 0xff }, + { NULL, NULL, NULL, 0, 0 }, +}; + +int __init sh7780_pcic_init(struct sh4_pci_address_map *map) { + struct pci_channel *chan = &board_pci_channels[0]; u32 word; /* diff --git a/arch/sh/drivers/pci/pci-sh7780.h b/arch/sh/drivers/pci/pci-sh7780.h index 213f1d8c9ca..7a4f8a8dd69 100644 --- a/arch/sh/drivers/pci/pci-sh7780.h +++ b/arch/sh/drivers/pci/pci-sh7780.h @@ -107,8 +107,6 @@ struct sh4_pci_address_map; /* arch/sh/drivers/pci/pci-sh7780.c */ -int sh7780_pci_init(struct pci_channel *chan); -int sh7780_pcic_init(struct pci_channel *chan, - struct sh4_pci_address_map *map); +int sh7780_pcic_init(struct sh4_pci_address_map *map); #endif /* _PCI_SH7780_H_ */ -- cgit v1.2.3 From a86043c2ad92aa6312807039198d6ab6171164ef Mon Sep 17 00:00:00 2001 From: Jesse Brandeburg Date: Thu, 16 Apr 2009 16:59:28 +0000 Subject: e1000e: fix bug in restart queue logic If the e1000e transmit cleanup inner loop exited early, then cleaned might not be true. This could cause tx hangs or other badness. Use count to track the total number of descriptors cleaned instead of basing a tx queue restart off of a temporary working state variable. This code now makes the flow the same for e1000/e1000e/igb/ixgbe Signed-off-by: Jesse Brandeburg Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/netdev.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index 1693ed116b1..ca82f19a7ed 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -621,7 +621,6 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter) struct e1000_buffer *buffer_info; unsigned int i, eop; unsigned int count = 0; - bool cleaned = false; unsigned int total_tx_bytes = 0, total_tx_packets = 0; i = tx_ring->next_to_clean; @@ -630,7 +629,8 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter) while ((eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) && (count < tx_ring->count)) { - for (cleaned = 0; !cleaned; count++) { + bool cleaned = false; + for (; !cleaned; count++) { tx_desc = E1000_TX_DESC(*tx_ring, i); buffer_info = &tx_ring->buffer_info[i]; cleaned = (i == eop); @@ -661,8 +661,8 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter) tx_ring->next_to_clean = i; #define TX_WAKE_THRESHOLD 32 - if (cleaned && netif_carrier_ok(netdev) && - e1000_desc_unused(tx_ring) >= TX_WAKE_THRESHOLD) { + if (count && netif_carrier_ok(netdev) && + e1000_desc_unused(tx_ring) >= TX_WAKE_THRESHOLD) { /* Make sure that anybody stopping the queue after this * sees the new next_to_clean. */ -- cgit v1.2.3 From 843f42678f6c47a2c8d1648e584cb57ebff3750f Mon Sep 17 00:00:00 2001 From: Jesse Brandeburg Date: Thu, 16 Apr 2009 16:59:47 +0000 Subject: e1000: fix transmit routine exit bug If the e1000 transmit cleanup inner loop exited early, then cleaned might not be true. This could cause tx hangs or other badness. Use count to track the total number of descriptors cleaned instead of basing a tx queue restart off of a temporary working state variable. This code now makes the flow the same for e1000/e1000e/igb/ixgbe Signed-off-by: Jesse Brandeburg Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000/e1000_main.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index ef12931d302..6a46ceed943 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -3834,7 +3834,6 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter, struct e1000_buffer *buffer_info; unsigned int i, eop; unsigned int count = 0; - bool cleaned = false; unsigned int total_tx_bytes=0, total_tx_packets=0; i = tx_ring->next_to_clean; @@ -3843,7 +3842,8 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter, while ((eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) && (count < tx_ring->count)) { - for (cleaned = false; !cleaned; count++) { + bool cleaned = false; + for ( ; !cleaned; count++) { tx_desc = E1000_TX_DESC(*tx_ring, i); buffer_info = &tx_ring->buffer_info[i]; cleaned = (i == eop); @@ -3871,7 +3871,7 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter, tx_ring->next_to_clean = i; #define TX_WAKE_THRESHOLD 32 - if (unlikely(cleaned && netif_carrier_ok(netdev) && + if (unlikely(count && netif_carrier_ok(netdev) && E1000_DESC_UNUSED(tx_ring) >= TX_WAKE_THRESHOLD)) { /* Make sure that anybody stopping the queue after this * sees the new next_to_clean. -- cgit v1.2.3 From f92ef202988ffb07bb86cf94d0b09f2a61192da7 Mon Sep 17 00:00:00 2001 From: PJ Waskiewicz Date: Thu, 16 Apr 2009 15:00:20 +0000 Subject: ixgbe: Fix DCB traffic class mapping for 82599 The traffic classes in hardware are not symmetrical for Rx and Tx. Rx is every 16 descriptor queues, Tx is not. It runs 32-32-16-16-8-8-8 when running with 8 traffic classes, and runs 64-32-16 when running with 4 traffic classes. This patch fixes the mapping. Signed-off-by: Peter P Waskiewicz Jr Cc: stable@kernel.org Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ixgbe/ixgbe_main.c | 52 ++++++++++++++++++++++++++++++++++++++---- 1 file changed, 48 insertions(+), 4 deletions(-) diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index 49a90378456..01884256f4c 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -2841,11 +2841,55 @@ static inline bool ixgbe_cache_ring_dcb(struct ixgbe_adapter *adapter) } ret = true; } else if (adapter->hw.mac.type == ixgbe_mac_82599EB) { - for (i = 0; i < dcb_i; i++) { - adapter->rx_ring[i].reg_idx = i << 4; - adapter->tx_ring[i].reg_idx = i << 4; + if (dcb_i == 8) { + /* + * Tx TC0 starts at: descriptor queue 0 + * Tx TC1 starts at: descriptor queue 32 + * Tx TC2 starts at: descriptor queue 64 + * Tx TC3 starts at: descriptor queue 80 + * Tx TC4 starts at: descriptor queue 96 + * Tx TC5 starts at: descriptor queue 104 + * Tx TC6 starts at: descriptor queue 112 + * Tx TC7 starts at: descriptor queue 120 + * + * Rx TC0-TC7 are offset by 16 queues each + */ + for (i = 0; i < 3; i++) { + adapter->tx_ring[i].reg_idx = i << 5; + adapter->rx_ring[i].reg_idx = i << 4; + } + for ( ; i < 5; i++) { + adapter->tx_ring[i].reg_idx = + ((i + 2) << 4); + adapter->rx_ring[i].reg_idx = i << 4; + } + for ( ; i < dcb_i; i++) { + adapter->tx_ring[i].reg_idx = + ((i + 8) << 3); + adapter->rx_ring[i].reg_idx = i << 4; + } + + ret = true; + } else if (dcb_i == 4) { + /* + * Tx TC0 starts at: descriptor queue 0 + * Tx TC1 starts at: descriptor queue 64 + * Tx TC2 starts at: descriptor queue 96 + * Tx TC3 starts at: descriptor queue 112 + * + * Rx TC0-TC3 are offset by 32 queues each + */ + adapter->tx_ring[0].reg_idx = 0; + adapter->tx_ring[1].reg_idx = 64; + adapter->tx_ring[2].reg_idx = 96; + adapter->tx_ring[3].reg_idx = 112; + for (i = 0 ; i < dcb_i; i++) + adapter->rx_ring[i].reg_idx = i << 5; + + ret = true; + } else { + ret = false; } - ret = true; } else { ret = false; } -- cgit v1.2.3 From 2f3889f42ec7c2b0c3049ecdd8e4687b6930779a Mon Sep 17 00:00:00 2001 From: PJ Waskiewicz Date: Thu, 16 Apr 2009 15:00:41 +0000 Subject: ixgbe: Fix the DCB PFC thresholds for 82599 The thresholds for the DCB priority flow control are incorrect for 82599. This fixes the thresholds to be correct. Signed-off-by: Peter P Waskiewicz Jr Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ixgbe/ixgbe_dcb_82599.c | 28 +++++++++++++++++----------- 1 file changed, 17 insertions(+), 11 deletions(-) diff --git a/drivers/net/ixgbe/ixgbe_dcb_82599.c b/drivers/net/ixgbe/ixgbe_dcb_82599.c index 470b676c1da..f4417fc3b0f 100644 --- a/drivers/net/ixgbe/ixgbe_dcb_82599.c +++ b/drivers/net/ixgbe/ixgbe_dcb_82599.c @@ -290,7 +290,7 @@ s32 ixgbe_dcb_config_tx_data_arbiter_82599(struct ixgbe_hw *hw, s32 ixgbe_dcb_config_pfc_82599(struct ixgbe_hw *hw, struct ixgbe_dcb_config *dcb_config) { - u32 i, reg; + u32 i, reg, rx_pba_size; /* If PFC is disabled globally then fall back to LFC. */ if (!dcb_config->pfc_mode_enable) { @@ -301,17 +301,23 @@ s32 ixgbe_dcb_config_pfc_82599(struct ixgbe_hw *hw, /* Configure PFC Tx thresholds per TC */ for (i = 0; i < MAX_TRAFFIC_CLASS; i++) { - /* Config and remember Tx */ + if (dcb_config->rx_pba_cfg == pba_equal) + rx_pba_size = IXGBE_RXPBSIZE_64KB; + else + rx_pba_size = (i < 4) ? IXGBE_RXPBSIZE_80KB + : IXGBE_RXPBSIZE_48KB; + + reg = ((rx_pba_size >> 5) & 0xFFE0); if (dcb_config->tc_config[i].dcb_pfc == pfc_enabled_full || - dcb_config->tc_config[i].dcb_pfc == pfc_enabled_tx) { - reg = hw->fc.high_water | IXGBE_FCRTH_FCEN; - IXGBE_WRITE_REG(hw, IXGBE_FCRTH_82599(i), reg); - reg = hw->fc.low_water | IXGBE_FCRTL_XONE; - IXGBE_WRITE_REG(hw, IXGBE_FCRTL_82599(i), reg); - } else { - IXGBE_WRITE_REG(hw, IXGBE_FCRTH_82599(i), 0); - IXGBE_WRITE_REG(hw, IXGBE_FCRTL_82599(i), 0); - } + dcb_config->tc_config[i].dcb_pfc == pfc_enabled_tx) + reg |= IXGBE_FCRTL_XONE; + IXGBE_WRITE_REG(hw, IXGBE_FCRTL_82599(i), reg); + + reg = ((rx_pba_size >> 2) & 0xFFE0); + if (dcb_config->tc_config[i].dcb_pfc == pfc_enabled_full || + dcb_config->tc_config[i].dcb_pfc == pfc_enabled_tx) + reg |= IXGBE_FCRTH_FCEN; + IXGBE_WRITE_REG(hw, IXGBE_FCRTH_82599(i), reg); } /* Configure pause time (2 TCs per register) */ -- cgit v1.2.3 From 4c7a47de897e89c25a40e228ac5319cbac7257fe Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 17 Apr 2009 17:21:36 +0900 Subject: sh: pci: Kill off platform-specific multi-window mappings. Commit 68b42d1b548be1840aff7122fdebeb804daf0fa3 ("sh: sh7785lcr: Map whole PCI address space.") changed around the semantics of how various chip-selects are made accessible to PCI. Now that there is a single large mapping covering from CS0-CS6, there is no longer any need to do multi-window mapping. Subsequently, all of the differing implementations can be consolidated in to pci-sh7780. Signed-off-by: Paul Mundt --- arch/sh/boards/mach-se/7780/irq.c | 17 +++++++++++++++++ arch/sh/drivers/pci/ops-r7780rp.c | 17 ----------------- arch/sh/drivers/pci/ops-sdk7780.c | 17 ----------------- arch/sh/drivers/pci/ops-se7780.c | 31 ------------------------------- arch/sh/drivers/pci/ops-sh7785lcr.c | 17 ----------------- arch/sh/drivers/pci/pci-sh7780.c | 24 ++++++++++++++++-------- arch/sh/drivers/pci/pci-sh7780.h | 5 ----- 7 files changed, 33 insertions(+), 95 deletions(-) diff --git a/arch/sh/boards/mach-se/7780/irq.c b/arch/sh/boards/mach-se/7780/irq.c index 44b61a597a1..b8d43b638fc 100644 --- a/arch/sh/boards/mach-se/7780/irq.c +++ b/arch/sh/boards/mach-se/7780/irq.c @@ -49,4 +49,21 @@ void __init init_se7780_IRQ(void) /* ICR1: detect low level(for 2ndcut) */ ctrl_outl(0xAAAA0000, INTC_ICR1); + + /* + * FPGA PCISEL register initialize + * + * CPU || SLOT1 | SLOT2 | S-ATA | USB + * ------------------------------------- + * INTA || INTA | INTD | -- | INTB + * ------------------------------------- + * INTB || INTB | INTA | -- | INTC + * ------------------------------------- + * INTC || INTC | INTB | INTA | -- + * ------------------------------------- + * INTD || INTD | INTC | -- | INTA + * ------------------------------------- + */ + ctrl_outw(0x0013, FPGA_PCI_INTSEL1); + ctrl_outw(0xE402, FPGA_PCI_INTSEL2); } diff --git a/arch/sh/drivers/pci/ops-r7780rp.c b/arch/sh/drivers/pci/ops-r7780rp.c index 044525df18c..4ea136e4eac 100644 --- a/arch/sh/drivers/pci/ops-r7780rp.c +++ b/arch/sh/drivers/pci/ops-r7780rp.c @@ -25,20 +25,3 @@ int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) { return irq_tab[slot]; } - -static struct sh4_pci_address_map sh7780_pci_map = { - .window0 = { - .base = SH7780_CS2_BASE_ADDR, - .size = 0x04000000, - }, - - .window1 = { - .base = SH7780_CS3_BASE_ADDR, - .size = 0x04000000, - }, -}; - -int __init pcibios_init_platform(void) -{ - return sh7780_pcic_init(&sh7780_pci_map); -} diff --git a/arch/sh/drivers/pci/ops-sdk7780.c b/arch/sh/drivers/pci/ops-sdk7780.c index 570fd71f693..1d9a91bcfb7 100644 --- a/arch/sh/drivers/pci/ops-sdk7780.c +++ b/arch/sh/drivers/pci/ops-sdk7780.c @@ -33,20 +33,3 @@ int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) { return sdk7780_irq_tab[pin-1][slot]; } - -static struct sh4_pci_address_map sdk7780_pci_map = { - .window0 = { - .base = SH7780_CS2_BASE_ADDR, - .size = 0x04000000, - }, - .window1 = { - .base = SH7780_CS3_BASE_ADDR, - .size = 0x04000000, - }, -}; - -int __init pcibios_init_platform(void) -{ - printk(KERN_INFO "SH7780 PCI: Finished initializing PCI controller\n"); - return sh7780_pcic_init(&sdk7780_pci_map); -} diff --git a/arch/sh/drivers/pci/ops-se7780.c b/arch/sh/drivers/pci/ops-se7780.c index 8b0941515b0..6c088ccfe47 100644 --- a/arch/sh/drivers/pci/ops-se7780.c +++ b/arch/sh/drivers/pci/ops-se7780.c @@ -40,34 +40,3 @@ int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) { return se7780_irq_tab[pin-1][slot]; } - -static struct sh4_pci_address_map se7780_pci_map = { - .window0 = { - .base = SH7780_CS2_BASE_ADDR, - .size = 0x04000000, - }, -}; - -int __init pcibios_init_platform(void) -{ - printk("SH7780 PCI: Finished initialization of the PCI controller\n"); - - /* - * FPGA PCISEL register initialize - * - * CPU || SLOT1 | SLOT2 | S-ATA | USB - * ------------------------------------- - * INTA || INTA | INTD | -- | INTB - * ------------------------------------- - * INTB || INTB | INTA | -- | INTC - * ------------------------------------- - * INTC || INTC | INTB | INTA | -- - * ------------------------------------- - * INTD || INTD | INTC | -- | INTA - * ------------------------------------- - */ - ctrl_outw(0x0013, FPGA_PCI_INTSEL1); - ctrl_outw(0xE402, FPGA_PCI_INTSEL2); - - return sh7780_pcic_init(&se7780_pci_map); -} diff --git a/arch/sh/drivers/pci/ops-sh7785lcr.c b/arch/sh/drivers/pci/ops-sh7785lcr.c index bac46b5d158..0fe423e2350 100644 --- a/arch/sh/drivers/pci/ops-sh7785lcr.c +++ b/arch/sh/drivers/pci/ops-sh7785lcr.c @@ -25,20 +25,3 @@ int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) { return irq_tab[slot]; } - -static struct sh4_pci_address_map sh7785_pci_map = { - .window0 = { -#if defined(CONFIG_32BIT) - .base = SH7780_32BIT_DDR_BASE_ADDR, - .size = 0x40000000, -#else - .base = SH7780_CS0_BASE_ADDR, - .size = 0x20000000, -#endif - }, -}; - -int __init pcibios_init_platform(void) -{ - return sh7780_pcic_init(&sh7785_pci_map); -} diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c index eb217ddf025..07c5529a273 100644 --- a/arch/sh/drivers/pci/pci-sh7780.c +++ b/arch/sh/drivers/pci/pci-sh7780.c @@ -90,7 +90,19 @@ struct pci_channel board_pci_channels[] = { { NULL, NULL, NULL, 0, 0 }, }; -int __init sh7780_pcic_init(struct sh4_pci_address_map *map) +static struct sh4_pci_address_map sh7780_pci_map = { + .window0 = { +#if defined(CONFIG_32BIT) + .base = SH7780_32BIT_DDR_BASE_ADDR, + .size = 0x40000000, +#else + .base = SH7780_CS0_BASE_ADDR, + .size = 0x20000000, +#endif + }, +}; + +int __init pcibios_init_platform(void) { struct pci_channel *chan = &board_pci_channels[0]; u32 word; @@ -114,14 +126,10 @@ int __init sh7780_pcic_init(struct sh4_pci_address_map *map) /* Set IO and Mem windows to local address * Make PCI and local address the same for easy 1 to 1 mapping */ - pci_write_reg(chan, map->window0.size - 0xfffff, SH4_PCILSR0); - pci_write_reg(chan, map->window1.size - 0xfffff, SH4_PCILSR1); + pci_write_reg(chan, sh7780_pci_map.window0.size - 0xfffff, SH4_PCILSR0); /* Set the values on window 0 PCI config registers */ - pci_write_reg(chan, map->window0.base, SH4_PCILAR0); - pci_write_reg(chan, map->window0.base, SH7780_PCIMBAR0); - /* Set the values on window 1 PCI config registers */ - pci_write_reg(chan, map->window1.base, SH4_PCILAR1); - pci_write_reg(chan, map->window1.base, SH7780_PCIMBAR1); + pci_write_reg(chan, sh7780_pci_map.window0.base, SH4_PCILAR0); + pci_write_reg(chan, sh7780_pci_map.window0.base, SH7780_PCIMBAR0); /* Apply any last-minute PCIC fixups */ pci_fixup_pcic(chan); diff --git a/arch/sh/drivers/pci/pci-sh7780.h b/arch/sh/drivers/pci/pci-sh7780.h index 7a4f8a8dd69..4b65d4b26f7 100644 --- a/arch/sh/drivers/pci/pci-sh7780.h +++ b/arch/sh/drivers/pci/pci-sh7780.h @@ -104,9 +104,4 @@ #define SH7780_32BIT_DDR_BASE_ADDR 0x40000000 -struct sh4_pci_address_map; - -/* arch/sh/drivers/pci/pci-sh7780.c */ -int sh7780_pcic_init(struct sh4_pci_address_map *map); - #endif /* _PCI_SH7780_H_ */ -- cgit v1.2.3 From ee33c58541bae92669fe64a39f695ab533d0de14 Mon Sep 17 00:00:00 2001 From: Erik Waling Date: Wed, 15 Apr 2009 23:32:10 +0000 Subject: macb: Handle Retry Limit Exceeded errors When transfering large amounts of data we sometimes experienced that the Retry Limit Exceeded (RLE) bit got set in TSR during transmission attempts. When this happened the driver would stall in a state that prevented any more data from being sent. Signed-off-by: Erik Waling Signed-off-by: Haavard Skinnemoen Signed-off-by: David S. Miller --- drivers/net/macb.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/net/macb.c b/drivers/net/macb.c index 46073de290c..9fcc717f4d1 100644 --- a/drivers/net/macb.c +++ b/drivers/net/macb.c @@ -316,10 +316,11 @@ static void macb_tx(struct macb *bp) dev_dbg(&bp->pdev->dev, "macb_tx status = %02lx\n", (unsigned long)status); - if (status & MACB_BIT(UND)) { + if (status & (MACB_BIT(UND) | MACB_BIT(TSR_RLE))) { int i; - printk(KERN_ERR "%s: TX underrun, resetting buffers\n", - bp->dev->name); + printk(KERN_ERR "%s: TX %s, resetting buffers\n", + bp->dev->name, status & MACB_BIT(UND) ? + "underrun" : "retry limit exceeded"); /* Transfer ongoing, disable transmitter, to avoid confusion */ if (status & MACB_BIT(TGO)) @@ -590,7 +591,8 @@ static irqreturn_t macb_interrupt(int irq, void *dev_id) } } - if (status & (MACB_BIT(TCOMP) | MACB_BIT(ISR_TUND))) + if (status & (MACB_BIT(TCOMP) | MACB_BIT(ISR_TUND) | + MACB_BIT(ISR_RLE))) macb_tx(bp); /* -- cgit v1.2.3 From f72f550c5885419ee1b32f47213087e6640e766b Mon Sep 17 00:00:00 2001 From: Erik Waling Date: Wed, 15 Apr 2009 23:32:11 +0000 Subject: macb: process the RX ring regardless of interrupt status Suppose that we receive lots of frames, start processing them, but exhaust our budget so that we return before we had a chance to look at all of them. Then, when the network layer calls us again, we will only continue processing the buffers if the REC bit was set in the mean time, which it might not be if there was a brief pause in the flow of packets. If this happens, we'll simply display a warning and call netif_rx_complete() with potentially lots of unprocessed packets in the RX ring... Fix this by scanning the ring no matter what flags are set in the interrupt status register. Signed-off-by: Erik Waling Signed-off-by: Haavard Skinnemoen Signed-off-by: David S. Miller --- drivers/net/macb.c | 18 ------------------ 1 file changed, 18 deletions(-) diff --git a/drivers/net/macb.c b/drivers/net/macb.c index 9fcc717f4d1..e82aee41d77 100644 --- a/drivers/net/macb.c +++ b/drivers/net/macb.c @@ -521,27 +521,10 @@ static int macb_poll(struct napi_struct *napi, int budget) macb_writel(bp, RSR, status); work_done = 0; - if (!status) { - /* - * This may happen if an interrupt was pending before - * this function was called last time, and no packets - * have been received since. - */ - napi_complete(napi); - goto out; - } dev_dbg(&bp->pdev->dev, "poll: status = %08lx, budget = %d\n", (unsigned long)status, budget); - if (!(status & MACB_BIT(REC))) { - dev_warn(&bp->pdev->dev, - "No RX buffers complete, status = %02lx\n", - (unsigned long)status); - napi_complete(napi); - goto out; - } - work_done = macb_rx(bp, budget); if (work_done < budget) napi_complete(napi); @@ -550,7 +533,6 @@ static int macb_poll(struct napi_struct *napi, int budget) * We've done what we can to clean the buffers. Make sure we * get notified when new packets arrive. */ -out: macb_writel(bp, IER, MACB_RX_INT_FLAGS); /* TODO: Handle errors */ -- cgit v1.2.3 From 62bcaa13039538c7f794b0cfcbc26e0313e7fcd5 Mon Sep 17 00:00:00 2001 From: Oliver Hartkopp Date: Fri, 17 Apr 2009 01:38:46 -0700 Subject: can: Network Drop Monitor: Make use of consume_skb() in af_can.c Since commit ead2ceb0ec9f85cff19c43b5cdb2f8a054484431 ("Network Drop Monitor: Adding kfree_skb_clean for non-drops and modifying end-of-line points for skbs") so called end-of-line points for skb's should use consume_skb() to free the socket buffer. In opposite to consume_skb() the function kfree_skb() is intended to be used for unexpected skb drops e.g. in error conditions that now can trigger the network drop monitor if enabled. This patch moves the skb end-of-line point in af_can.c to use consume_skb(). Signed-off-by: Oliver Hartkopp Signed-off-by: David S. Miller --- net/can/af_can.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/can/af_can.c b/net/can/af_can.c index 547bafc79e2..10f0528c3bf 100644 --- a/net/can/af_can.c +++ b/net/can/af_can.c @@ -674,8 +674,8 @@ static int can_rcv(struct sk_buff *skb, struct net_device *dev, rcu_read_unlock(); - /* free the skbuff allocated by the netdevice driver */ - kfree_skb(skb); + /* consume the skbuff allocated by the netdevice driver */ + consume_skb(skb); if (matches > 0) { can_stats.matches++; -- cgit v1.2.3 From 9dd014eb9804f19d6230c3cbc10fa25f5416bda7 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Fri, 17 Apr 2009 01:40:19 -0700 Subject: pegasus: Handle disconnect error code correctly. EPERM means that disconnect() is runnung. It should be treated like ENODEV Signed-off-by: Oliver Neukum Signed-off-by: David S. Miller --- drivers/net/usb/pegasus.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/usb/pegasus.c b/drivers/net/usb/pegasus.c index a8228d87c8c..2138535f233 100644 --- a/drivers/net/usb/pegasus.c +++ b/drivers/net/usb/pegasus.c @@ -899,6 +899,7 @@ static int pegasus_start_xmit(struct sk_buff *skb, struct net_device *net) /* cleanup should already have been scheduled */ break; case -ENODEV: /* disconnect() upcoming */ + case -EPERM: netif_device_detach(pegasus->net); break; default: -- cgit v1.2.3 From a0a69a0106dab8d20596f97f6674bed3b394d1ee Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Fri, 17 Apr 2009 02:34:38 -0700 Subject: gro: Fix use after free in tcp_gro_receive After calling skb_gro_receive skb->len can no longer be relied on since if the skb was merged using frags, then its pages will have been removed and the length reduced. This caused tcp_gro_receive to prematurely end merging which resulted in suboptimal performance with ixgbe. The fix is to store skb->len on the stack. Reported-by: Mark Wagner Signed-off-by: Herbert Xu Signed-off-by: David S. Miller --- net/ipv4/tcp.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index fafbec8b073..1d7f49c6f0c 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -2511,6 +2511,7 @@ struct sk_buff **tcp_gro_receive(struct sk_buff **head, struct sk_buff *skb) struct sk_buff *p; struct tcphdr *th; struct tcphdr *th2; + unsigned int len; unsigned int thlen; unsigned int flags; unsigned int mss = 1; @@ -2531,6 +2532,7 @@ struct sk_buff **tcp_gro_receive(struct sk_buff **head, struct sk_buff *skb) skb_gro_pull(skb, thlen); + len = skb_gro_len(skb); flags = tcp_flag_word(th); for (; (p = *head); head = &p->next) { @@ -2561,7 +2563,7 @@ found: mss = skb_shinfo(p)->gso_size; - flush |= (skb_gro_len(skb) > mss) | !skb_gro_len(skb); + flush |= (len > mss) | !len; flush |= (ntohl(th2->seq) + skb_gro_len(p)) ^ ntohl(th->seq); if (flush || skb_gro_receive(head, skb)) { @@ -2574,7 +2576,7 @@ found: tcp_flag_word(th2) |= flags & (TCP_FLAG_FIN | TCP_FLAG_PSH); out_check_final: - flush = skb_gro_len(skb) < mss; + flush = len < mss; flush |= flags & (TCP_FLAG_URG | TCP_FLAG_PSH | TCP_FLAG_RST | TCP_FLAG_SYN | TCP_FLAG_FIN); -- cgit v1.2.3 From 60c8a774fb7971cec4a72fd5d002f39668826808 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 17 Apr 2009 03:59:42 -0700 Subject: sparc64: Update defconfig. Signed-off-by: David S. Miller --- arch/sparc/configs/sparc64_defconfig | 182 +++++++++++++++++++++++------------ 1 file changed, 119 insertions(+), 63 deletions(-) diff --git a/arch/sparc/configs/sparc64_defconfig b/arch/sparc/configs/sparc64_defconfig index ade49941def..b5d63bd8716 100644 --- a/arch/sparc/configs/sparc64_defconfig +++ b/arch/sparc/configs/sparc64_defconfig @@ -1,13 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28 -# Fri Jan 2 18:14:26 2009 +# Linux kernel version: 2.6.30-rc2 +# Fri Apr 17 02:03:07 2009 # +CONFIG_64BIT=y CONFIG_SPARC=y +# CONFIG_SPARC32 is not set CONFIG_SPARC64=y CONFIG_ARCH_DEFCONFIG="arch/sparc/configs/sparc64_defconfig" CONFIG_BITS=64 -CONFIG_64BIT=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_CLOCKEVENTS=y @@ -22,6 +23,7 @@ CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_MMU=y CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_OF=y +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -36,17 +38,27 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=18 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y CONFIG_RT_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_RELAY=y @@ -55,24 +67,28 @@ CONFIG_NAMESPACES=y # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -# CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -82,6 +98,7 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +# CONFIG_COMPAT_BRK is not set # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set @@ -91,15 +108,16 @@ CONFIG_TRACEPOINTS=y CONFIG_OPROFILE=m CONFIG_HAVE_OPROFILE=y CONFIG_KPROBES=y +CONFIG_HAVE_SYSCALL_WRAPPERS=y CONFIG_KRETPROBES=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_USE_GENERIC_SMP_HELPERS=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -107,10 +125,8 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y -CONFIG_KMOD=y CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y -CONFIG_BLK_DEV_IO_TRACE=y CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set CONFIG_BLOCK_COMPAT=y @@ -127,11 +143,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -185,11 +196,12 @@ CONFIG_SPARSEMEM_VMEMMAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -CONFIG_RESOURCES_64BIT=y CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=1 CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_SCHED_SMT=y CONFIG_SCHED_MC=y # CONFIG_PREEMPT_NONE is not set @@ -210,6 +222,8 @@ CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set CONFIG_SUN_OPENPROMFS=m CONFIG_SPARC64_PCI=y @@ -229,8 +243,6 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NET_NS is not set -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -292,25 +304,7 @@ CONFIG_IPV6_TUNNEL=m # CONFIG_IPV6_MROUTE is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set -CONFIG_IP_DCCP=m -CONFIG_INET_DCCP_DIAG=m -CONFIG_IP_DCCP_ACKVEC=y - -# -# DCCP CCIDs Configuration (EXPERIMENTAL) -# -CONFIG_IP_DCCP_CCID2=m -# CONFIG_IP_DCCP_CCID2_DEBUG is not set -CONFIG_IP_DCCP_CCID3=m -# CONFIG_IP_DCCP_CCID3_DEBUG is not set -CONFIG_IP_DCCP_CCID3_RTO=100 -CONFIG_IP_DCCP_TFRC_LIB=m - -# -# DCCP Kernel Hacking -# -# CONFIG_IP_DCCP_DEBUG is not set -# CONFIG_NET_DCCPPROBE is not set +# CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set @@ -326,6 +320,7 @@ CONFIG_VLAN_8021Q=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -334,18 +329,19 @@ CONFIG_VLAN_8021Q=m # CONFIG_NET_PKTGEN=m CONFIG_NET_TCPPROBE=m +# CONFIG_NET_DROP_MONITOR is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -389,19 +385,27 @@ CONFIG_SUNVDC=m # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_XFER_MODE=y CONFIG_IDE_TIMINGS=y CONFIG_IDE_ATAPI=y # CONFIG_BLK_DEV_IDE_SATA is not set @@ -439,6 +443,7 @@ CONFIG_BLK_DEV_ALI15X3=y # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT8172 is not set # CONFIG_BLK_DEV_IT8213 is not set # CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set @@ -506,8 +511,10 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -528,6 +535,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_SUNESP is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m @@ -536,7 +544,7 @@ CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m CONFIG_MD_RAID10=m CONFIG_MD_RAID456=m -# CONFIG_MD_RAID5_RESHAPE is not set +CONFIG_MD_RAID6_PQ=m CONFIG_MD_MULTIPATH=m # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m @@ -561,6 +569,7 @@ CONFIG_DM_ZERO=m # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -589,14 +598,16 @@ CONFIG_PHYLIB=m # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=m -# CONFIG_SUNLANCE is not set -# CONFIG_HAPPYMEAL is not set +CONFIG_SUNLANCE=m +CONFIG_HAPPYMEAL=m # CONFIG_SUNBMAC is not set # CONFIG_SUNQE is not set -# CONFIG_SUNGEM is not set -CONFIG_CASSINI=m +CONFIG_SUNGEM=m +# CONFIG_CASSINI is not set CONFIG_SUNVNET=m # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -631,9 +642,10 @@ CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set CONFIG_E1000=m -# CONFIG_E1000E is not set +CONFIG_E1000E=m # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_MYRI_SBUS is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set @@ -648,6 +660,7 @@ CONFIG_BNX2=m # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -657,6 +670,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set CONFIG_NIU=m @@ -666,6 +680,7 @@ CONFIG_NIU=m # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -673,7 +688,10 @@ CONFIG_NIU=m # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # # USB Network Adapters @@ -738,7 +756,6 @@ CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set @@ -805,6 +822,7 @@ CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=m +# CONFIG_HW_RANDOM_TIMERIOMEM is not set CONFIG_HW_RANDOM_N2RNG=m # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -867,12 +885,9 @@ CONFIG_I2C_ALGOBIT=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -897,12 +912,14 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -917,10 +934,14 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -957,10 +978,12 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set # @@ -1053,6 +1076,7 @@ CONFIG_FB_ATY_GX=y # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -1141,6 +1165,8 @@ CONFIG_SND_ALI5451=m # CONFIG_SND_INDIGO is not set # CONFIG_SND_INDIGOIO is not set # CONFIG_SND_INDIGODJ is not set +# CONFIG_SND_INDIGOIOX is not set +# CONFIG_SND_INDIGODJX is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_EMU10K1X is not set # CONFIG_SND_ENS1370 is not set @@ -1197,28 +1223,31 @@ CONFIG_USB_HIDDEV=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y -CONFIG_HID_BRIGHT=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y -CONFIG_HID_DELL=y +# CONFIG_DRAGONRISE_FF is not set CONFIG_HID_EZKEY=y +CONFIG_HID_KYE=y CONFIG_HID_GYRATION=y +CONFIG_HID_KENSINGTON=y CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set CONFIG_HID_MICROSOFT=y CONFIG_HID_MONTEREY=y +CONFIG_HID_NTRIG=y CONFIG_HID_PANTHERLORD=y # CONFIG_PANTHERLORD_FF is not set CONFIG_HID_PETALYNX=y CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y +# CONFIG_GREENASIA_FF is not set +CONFIG_HID_TOPSEED=y # CONFIG_THRUSTMASTER_FF is not set # CONFIG_ZEROPLUS_FF is not set CONFIG_USB_SUPPORT=y @@ -1247,6 +1276,7 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_EHCI_HCD=m # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y @@ -1268,18 +1298,17 @@ CONFIG_USB_UHCI_HCD=m # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set @@ -1315,7 +1344,6 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1327,6 +1355,11 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1390,6 +1423,7 @@ CONFIG_RTC_DRV_BQ4802=y CONFIG_RTC_DRV_SUN4V=y CONFIG_RTC_DRV_STARFIRE=y # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1412,6 +1446,7 @@ CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y @@ -1426,6 +1461,7 @@ CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1434,6 +1470,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1460,10 +1501,7 @@ CONFIG_TMPFS=y CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_ECRYPT_FS is not set @@ -1473,6 +1511,7 @@ CONFIG_HUGETLB_PAGE=y # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -1481,6 +1520,7 @@ CONFIG_HUGETLB_PAGE=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y # CONFIG_NFS_FS is not set # CONFIG_NFSD is not set @@ -1555,6 +1595,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 # CONFIG_SCHED_DEBUG is not set CONFIG_SCHEDSTATS=y # CONFIG_TIMER_STATS is not set @@ -1590,10 +1633,12 @@ CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_NOP_TRACER=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_RING_BUFFER=y CONFIG_TRACING=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1602,18 +1647,21 @@ CONFIG_TRACING=y # CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +CONFIG_BLK_DEV_IO_TRACE=y # CONFIG_FTRACE_STARTUP_TEST is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_DCFLUSH is not set # CONFIG_STACK_DEBUG is not set -# CONFIG_DEBUG_PAGEALLOC is not set # # Security options @@ -1642,10 +1690,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_AUTHENC=y CONFIG_CRYPTO_TEST=m @@ -1715,6 +1765,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # Compression # CONFIG_CRYPTO_DEFLATE=y +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # @@ -1723,11 +1774,13 @@ CONFIG_CRYPTO_DEFLATE=y # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set +CONFIG_BINARY_PRINTF=y # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m CONFIG_CRC16=m # CONFIG_CRC_T10DIF is not set @@ -1737,8 +1790,11 @@ CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y -- cgit v1.2.3 From a40ac3414eb4122345efd071f787a349a30fccf7 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 17 Apr 2009 04:05:06 -0700 Subject: sparc32: Update defconfig. Signed-off-by: David S. Miller --- arch/sparc/configs/sparc32_defconfig | 98 +++++++++++++++++++++++++----------- 1 file changed, 68 insertions(+), 30 deletions(-) diff --git a/arch/sparc/configs/sparc32_defconfig b/arch/sparc/configs/sparc32_defconfig index 09ab46e4c59..8bcd27af724 100644 --- a/arch/sparc/configs/sparc32_defconfig +++ b/arch/sparc/configs/sparc32_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28 -# Thu Jan 8 16:45:44 2009 +# Linux kernel version: 2.6.30-rc2 +# Fri Apr 17 04:04:46 2009 # # CONFIG_64BIT is not set CONFIG_SPARC=y @@ -30,17 +30,27 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y CONFIG_RT_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -49,24 +59,28 @@ CONFIG_NAMESPACES=y # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -75,12 +89,15 @@ CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -93,7 +110,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -109,11 +125,6 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -144,6 +155,8 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_SUN_PM=y # CONFIG_SPARC_LED is not set CONFIG_SERIAL_CONSOLE=y @@ -159,6 +172,7 @@ CONFIG_PCI_SYSCALL=y CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set CONFIG_SUN_OPENPROMFS=m CONFIG_SPARC32_PCI=y @@ -175,8 +189,6 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NET_NS is not set -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -251,6 +263,7 @@ CONFIG_IPV6_TUNNEL=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -263,7 +276,6 @@ CONFIG_NET_PKTGEN=m # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -313,12 +325,16 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -375,8 +391,10 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -398,6 +416,7 @@ CONFIG_SCSI_QLOGICPTI=m CONFIG_SCSI_SUNESP=y # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set # CONFIG_MD is not set # CONFIG_FUSION is not set @@ -413,6 +432,7 @@ CONFIG_SCSI_SUNESP=y # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -430,6 +450,8 @@ CONFIG_SUNQE=m # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -448,6 +470,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000 is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_MYRI_SBUS is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set @@ -462,6 +485,7 @@ CONFIG_NETDEV_1000=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -471,6 +495,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -480,6 +505,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -487,7 +513,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -537,7 +562,6 @@ CONFIG_MOUSE_PS2=m CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set @@ -597,6 +621,7 @@ CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=m +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -688,7 +713,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -700,7 +724,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set @@ -750,6 +774,7 @@ CONFIG_RTC_DRV_M48T59=y # on-CPU RTC drivers # # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -777,6 +802,7 @@ CONFIG_FS_POSIX_ACL=y CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -785,6 +811,11 @@ CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -820,14 +851,20 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set CONFIG_ROMFS_FS=m +CONFIG_ROMFS_BACKED_BY_BLOCK=y +# CONFIG_ROMFS_BACKED_BY_MTD is not set +# CONFIG_ROMFS_BACKED_BY_BOTH is not set +CONFIG_ROMFS_ON_BLOCK=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -838,7 +875,6 @@ CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=m -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=m # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -911,6 +947,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 # CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -939,15 +978,7 @@ CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_SYSCTL_SYSCALL_CHECK is not set - -# -# Tracers -# -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_PAGE_POISONING is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_KGDB=y @@ -979,10 +1010,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_AUTHENC=y # CONFIG_CRYPTO_TEST is not set @@ -1052,6 +1085,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # Compression # CONFIG_CRYPTO_DEFLATE=y +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # @@ -1059,6 +1093,7 @@ CONFIG_CRYPTO_DEFLATE=y # # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1074,7 +1109,10 @@ CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y -- cgit v1.2.3 From a6d377b6969235a3b5a6e87bdcef387d0976b41c Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 17 Apr 2009 20:11:44 +0900 Subject: sh: pci: Consolidate SH7780 PCIC IRQ routing. Now that the platform code is a bit leaner, we can start consolidating the various IRQ routing implementations. There are effectively only 2 variants, and the others can use those directly. Signed-off-by: Paul Mundt --- arch/sh/drivers/pci/Makefile | 8 +++---- arch/sh/drivers/pci/fixups-r7780rp.c | 10 ++++++++- arch/sh/drivers/pci/fixups-sdk7780.c | 19 +++++++++++++++- arch/sh/drivers/pci/ops-r7780rp.c | 27 ----------------------- arch/sh/drivers/pci/ops-sdk7780.c | 35 ------------------------------ arch/sh/drivers/pci/ops-se7780.c | 42 ------------------------------------ arch/sh/drivers/pci/ops-sh7785lcr.c | 27 ----------------------- 7 files changed, 31 insertions(+), 137 deletions(-) delete mode 100644 arch/sh/drivers/pci/ops-r7780rp.c delete mode 100644 arch/sh/drivers/pci/ops-sdk7780.c delete mode 100644 arch/sh/drivers/pci/ops-se7780.c delete mode 100644 arch/sh/drivers/pci/ops-sh7785lcr.c diff --git a/arch/sh/drivers/pci/Makefile b/arch/sh/drivers/pci/Makefile index 67d710a04de..5003971476e 100644 --- a/arch/sh/drivers/pci/Makefile +++ b/arch/sh/drivers/pci/Makefile @@ -16,11 +16,11 @@ obj-$(CONFIG_SH_DREAMCAST) += ops-dreamcast.o fixups-dreamcast.o obj-$(CONFIG_SH_SECUREEDGE5410) += ops-snapgear.o obj-$(CONFIG_SH_RTS7751R2D) += ops-rts7751r2d.o fixups-rts7751r2d.o obj-$(CONFIG_SH_SH03) += ops-sh03.o fixups-sh03.o -obj-$(CONFIG_SH_HIGHLANDER) += ops-r7780rp.o fixups-r7780rp.o -obj-$(CONFIG_SH_SDK7780) += ops-sdk7780.o fixups-sdk7780.o +obj-$(CONFIG_SH_HIGHLANDER) += fixups-r7780rp.o +obj-$(CONFIG_SH_SH7785LCR) += fixups-r7780rp.o +obj-$(CONFIG_SH_SDK7780) += fixups-sdk7780.o +obj-$(CONFIG_SH_7780_SOLUTION_ENGINE) += fixups-sdk7780.o obj-$(CONFIG_SH_TITAN) += ops-titan.o obj-$(CONFIG_SH_LANDISK) += ops-landisk.o obj-$(CONFIG_SH_LBOX_RE2) += ops-lboxre2.o fixups-lboxre2.o -obj-$(CONFIG_SH_7780_SOLUTION_ENGINE) += ops-se7780.o fixups-sdk7780.o obj-$(CONFIG_SH_CAYMAN) += ops-cayman.o -obj-$(CONFIG_SH_SH7785LCR) += ops-sh7785lcr.o fixups-r7780rp.o diff --git a/arch/sh/drivers/pci/fixups-r7780rp.c b/arch/sh/drivers/pci/fixups-r7780rp.c index 31f8dfbfcbf..864e92f6970 100644 --- a/arch/sh/drivers/pci/fixups-r7780rp.c +++ b/arch/sh/drivers/pci/fixups-r7780rp.c @@ -11,9 +11,17 @@ * for more details. */ #include +#include #include "pci-sh4.h" -#include +static char irq_tab[] __initdata = { + 65, 66, 67, 68, +}; + +int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) +{ + return irq_tab[slot]; +} int pci_fixup_pcic(struct pci_channel *chan) { pci_write_reg(chan, 0x000043ff, SH4_PCIINTM); diff --git a/arch/sh/drivers/pci/fixups-sdk7780.c b/arch/sh/drivers/pci/fixups-sdk7780.c index 004efd486ee..da60e99894b 100644 --- a/arch/sh/drivers/pci/fixups-sdk7780.c +++ b/arch/sh/drivers/pci/fixups-sdk7780.c @@ -5,15 +5,32 @@ * * Copyright (C) 2003 Lineo uSolutions, Inc. * Copyright (C) 2004 - 2006 Paul Mundt + * Copyright (C) 2006 Nobuhiro Iwamatsu * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive * for more details. */ #include +#include #include "pci-sh4.h" -#include +/* IDSEL [16][17][18][19][20][21][22][23][24][25][26][27][28][29][30][31] */ +static char sdk7780_irq_tab[4][16] __initdata = { + /* INTA */ + { 65, 68, 67, 68, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 }, + /* INTB */ + { 66, 65, -1, 65, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 }, + /* INTC */ + { 67, 66, -1, 66, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 }, + /* INTD */ + { 68, 67, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 }, +}; + +int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) +{ + return sdk7780_irq_tab[pin-1][slot]; +} int pci_fixup_pcic(struct pci_channel *chan) { /* Enable all interrupts, so we know what to fix */ diff --git a/arch/sh/drivers/pci/ops-r7780rp.c b/arch/sh/drivers/pci/ops-r7780rp.c deleted file mode 100644 index 4ea136e4eac..00000000000 --- a/arch/sh/drivers/pci/ops-r7780rp.c +++ /dev/null @@ -1,27 +0,0 @@ -/* - * Author: Ian DaSilva (idasilva@mvista.com) - * - * Highly leveraged from pci-bigsur.c, written by Dustin McIntire. - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * PCI initialization for the Renesas SH7780 Highlander R7780RP-1 board - */ -#include -#include -#include -#include -#include -#include -#include -#include "pci-sh4.h" - -static char irq_tab[] __initdata = { - 65, 66, 67, 68, -}; - -int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) -{ - return irq_tab[slot]; -} diff --git a/arch/sh/drivers/pci/ops-sdk7780.c b/arch/sh/drivers/pci/ops-sdk7780.c deleted file mode 100644 index 1d9a91bcfb7..00000000000 --- a/arch/sh/drivers/pci/ops-sdk7780.c +++ /dev/null @@ -1,35 +0,0 @@ -/* - * linux/arch/sh/drivers/pci/ops-sdk7780.c - * - * Copyright (C) 2006 Nobuhiro Iwamatsu - * - * PCI initialization for the SDK7780SE03 - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - */ -#include -#include -#include -#include -#include -#include -#include -#include "pci-sh4.h" - -/* IDSEL [16][17][18][19][20][21][22][23][24][25][26][27][28][29][30][31] */ -static char sdk7780_irq_tab[4][16] __initdata = { - /* INTA */ - { 65, 68, 67, 68, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 }, - /* INTB */ - { 66, 65, -1, 65, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 }, - /* INTC */ - { 67, 66, -1, 66, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 }, - /* INTD */ - { 68, 67, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 }, -}; - -int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) -{ - return sdk7780_irq_tab[pin-1][slot]; -} diff --git a/arch/sh/drivers/pci/ops-se7780.c b/arch/sh/drivers/pci/ops-se7780.c deleted file mode 100644 index 6c088ccfe47..00000000000 --- a/arch/sh/drivers/pci/ops-se7780.c +++ /dev/null @@ -1,42 +0,0 @@ -/* - * linux/arch/sh/drivers/pci/ops-se7780.c - * - * Copyright (C) 2006 Nobuhiro Iwamatsu - * - * PCI initialization for the Hitachi UL Solution Engine 7780SE03 - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - */ -#include -#include -#include -#include -#include -#include -#include -#include "pci-sh4.h" - -/* - * IDSEL = AD16 PCI slot - * IDSEL = AD17 PCI slot - * IDSEL = AD18 Serial ATA Controller (Silicon Image SiL3512A) - * IDSEL = AD19 USB Host Controller (NEC uPD7210100A) - */ - -/* IDSEL [16][17][18][19][20][21][22][23][24][25][26][27][28][29][30][31] */ -static char se7780_irq_tab[4][16] __initdata = { - /* INTA */ - { 65, 68, 67, 68, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 }, - /* INTB */ - { 66, 65, -1, 65, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 }, - /* INTC */ - { 67, 66, -1, 66, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 }, - /* INTD */ - { 68, 67, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 }, -}; - -int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) -{ - return se7780_irq_tab[pin-1][slot]; -} diff --git a/arch/sh/drivers/pci/ops-sh7785lcr.c b/arch/sh/drivers/pci/ops-sh7785lcr.c deleted file mode 100644 index 0fe423e2350..00000000000 --- a/arch/sh/drivers/pci/ops-sh7785lcr.c +++ /dev/null @@ -1,27 +0,0 @@ -/* - * Author: Ian DaSilva (idasilva@mvista.com) - * - * Highly leveraged from pci-bigsur.c, written by Dustin McIntire. - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * PCI initialization for the Renesas R0P7785LC0011RL board - * Based on arch/sh/drivers/pci/ops-r7780rp.c - * - */ -#include -#include -#include -#include -#include -#include "pci-sh4.h" - -static char irq_tab[] __initdata = { - 65, 66, 67, 68, -}; - -int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) -{ - return irq_tab[slot]; -} -- cgit v1.2.3 From 62c7ae87cb5962d3dfaa6d916a15e4faa9e07363 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 17 Apr 2009 20:37:16 +0900 Subject: sh: pci: Start unifying the SH7780 PCIC initialization. This starts moving out the common initialization bits from the various fixup paths in to the shared init path. Signed-off-by: Paul Mundt --- arch/sh/drivers/pci/fixups-r7780rp.c | 20 +-------------- arch/sh/drivers/pci/fixups-sdk7780.c | 32 ++++------------------- arch/sh/drivers/pci/pci-sh7780.c | 50 ++++++++++++++++++++++-------------- arch/sh/drivers/pci/pci-sh7780.h | 5 ---- 4 files changed, 37 insertions(+), 70 deletions(-) diff --git a/arch/sh/drivers/pci/fixups-r7780rp.c b/arch/sh/drivers/pci/fixups-r7780rp.c index 864e92f6970..15ca65cb667 100644 --- a/arch/sh/drivers/pci/fixups-r7780rp.c +++ b/arch/sh/drivers/pci/fixups-r7780rp.c @@ -22,33 +22,15 @@ int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) { return irq_tab[slot]; } + int pci_fixup_pcic(struct pci_channel *chan) { pci_write_reg(chan, 0x000043ff, SH4_PCIINTM); - pci_write_reg(chan, 0x0000380f, SH4_PCIAINTM); - - pci_write_reg(chan, 0xfbb00047, SH7780_PCICMD); pci_write_reg(chan, 0x00000000, SH7780_PCIIBAR); - - pci_write_reg(chan, 0x00011912, SH7780_PCISVID); pci_write_reg(chan, 0x08000000, SH7780_PCICSCR0); pci_write_reg(chan, 0x0000001b, SH7780_PCICSAR0); pci_write_reg(chan, 0xfd000000, SH7780_PCICSCR1); pci_write_reg(chan, 0x0000000f, SH7780_PCICSAR1); - pci_write_reg(chan, 0xfd000000, SH7780_PCIMBR0); - pci_write_reg(chan, 0x00fc0000, SH7780_PCIMBMR0); - -#ifdef CONFIG_32BIT - pci_write_reg(chan, 0xc0000000, SH7780_PCIMBR2); - pci_write_reg(chan, 0x20000000 - SH7780_PCI_IO_SIZE, SH7780_PCIMBMR2); -#endif - - /* Set IOBR for windows containing area specified in pci.h */ - pci_write_reg(chan, chan->io_resource->start & ~(SH7780_PCI_IO_SIZE-1), - SH7780_PCIIOBR); - pci_write_reg(chan, ((SH7780_PCI_IO_SIZE-1) & (7<<18)), - SH7780_PCIIOBMR); - return 0; } diff --git a/arch/sh/drivers/pci/fixups-sdk7780.c b/arch/sh/drivers/pci/fixups-sdk7780.c index da60e99894b..250b0edd736 100644 --- a/arch/sh/drivers/pci/fixups-sdk7780.c +++ b/arch/sh/drivers/pci/fixups-sdk7780.c @@ -35,40 +35,18 @@ int pci_fixup_pcic(struct pci_channel *chan) { /* Enable all interrupts, so we know what to fix */ pci_write_reg(chan, 0x0000C3FF, SH7780_PCIIMR); - pci_write_reg(chan, 0x0000380F, SH7780_PCIAINTM); /* Set up standard PCI config registers */ - pci_write_reg(chan, 0xFB00, SH7780_PCISTATUS); - pci_write_reg(chan, 0x0047, SH7780_PCICMD); - pci_write_reg(chan, 0x00, SH7780_PCIPIF); - pci_write_reg(chan, 0x1912, SH7780_PCISVID); - pci_write_reg(chan, 0x0001, SH7780_PCISID); - pci_write_reg(chan, 0x08000000, SH7780_PCIMBAR0); /* PCI */ - pci_write_reg(chan, 0x08000000, SH7780_PCILAR0); /* SHwy */ - pci_write_reg(chan, 0x07F00001, SH7780_PCILSR); /* size 128M w/ MBAR */ + pci_write_reg(chan, 0x08000000, SH4_PCILAR0); /* SHwy */ + pci_write_reg(chan, 0x07F00001, SH4_PCILSR0); /* size 128M w/ MBAR */ pci_write_reg(chan, 0x00000000, SH7780_PCIMBAR1); - pci_write_reg(chan, 0x00000000, SH7780_PCILAR1); - pci_write_reg(chan, 0x00000000, SH7780_PCILSR1); + pci_write_reg(chan, 0x00000000, SH4_PCILAR1); + pci_write_reg(chan, 0x00000000, SH4_PCILSR1); pci_write_reg(chan, 0xAB000801, SH7780_PCIIBAR); - - /* - * Set the MBR so PCI address is one-to-one with window, - * meaning all calls go straight through... use ifdef to - * catch erroneous assumption. - */ - pci_write_reg(chan, 0xFD000000 , SH7780_PCIMBR0); - pci_write_reg(chan, 0x00FC0000 , SH7780_PCIMBMR0); /* 16M */ - - /* Set IOBR for window containing area specified in pci.h */ - pci_write_reg(chan, chan->io_resource->start & ~(SH7780_PCI_IO_SIZE-1), - SH7780_PCIIOBR); - pci_write_reg(chan, (SH7780_PCI_IO_SIZE-1) & (7 << 18), - SH7780_PCIIOBMR); - - pci_write_reg(chan, 0xA5000C01, SH7780_PCICR); + pci_write_reg(chan, 0xA5000C01, SH4_PCICR); return 0; } diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c index 07c5529a273..f02d9dfcf25 100644 --- a/arch/sh/drivers/pci/pci-sh7780.c +++ b/arch/sh/drivers/pci/pci-sh7780.c @@ -1,19 +1,12 @@ /* - * Low-Level PCI Support for the SH7780 + * Low-Level PCI Support for the SH7780 * - * Dustin McIntire (dustin@sensoria.com) - * Derived from arch/i386/kernel/pci-*.c which bore the message: - * (c) 1999--2000 Martin Mares - * - * Ported to the new API by Paul Mundt - * With cleanup by Paul van Gool - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. + * Copyright (C) 2005 - 2009 Paul Mundt * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. */ -#undef DEBUG - #include #include #include @@ -117,13 +110,8 @@ int __init pcibios_init_platform(void) pci_cache_line_size = pci_read_reg(chan, SH7780_PCICLS) / 4; - /* set the command/status bits to: - * Wait Cycle Control + Parity Enable + Bus Master + - * Mem space enable - */ - pci_write_reg(chan, 0x00000046, SH7780_PCICMD); - - /* Set IO and Mem windows to local address + /* + * Set IO and Mem windows to local address * Make PCI and local address the same for easy 1 to 1 mapping */ pci_write_reg(chan, sh7780_pci_map.window0.size - 0xfffff, SH4_PCILSR0); @@ -131,9 +119,33 @@ int __init pcibios_init_platform(void) pci_write_reg(chan, sh7780_pci_map.window0.base, SH4_PCILAR0); pci_write_reg(chan, sh7780_pci_map.window0.base, SH7780_PCIMBAR0); + pci_write_reg(chan, 0x0000380f, SH4_PCIAINTM); + + /* Set up standard PCI config registers */ + __raw_writew(0xFB00, chan->reg_base + SH7780_PCISTATUS); + __raw_writew(0x0047, chan->reg_base + SH7780_PCICMD); + __raw_writew(0x1912, chan->reg_base + SH7780_PCISVID); + __raw_writew(0x0001, chan->reg_base + SH7780_PCISID); + + __raw_writeb(0x00, chan->reg_base + SH7780_PCIPIF); + /* Apply any last-minute PCIC fixups */ pci_fixup_pcic(chan); + pci_write_reg(chan, 0xfd000000, SH7780_PCIMBR0); + pci_write_reg(chan, 0x00fc0000, SH7780_PCIMBMR0); + +#ifdef CONFIG_32BIT + pci_write_reg(chan, 0xc0000000, SH7780_PCIMBR2); + pci_write_reg(chan, 0x20000000 - SH7780_PCI_IO_SIZE, SH7780_PCIMBMR2); +#endif + + /* Set IOBR for windows containing area specified in pci.h */ + pci_write_reg(chan, chan->io_resource->start & ~(SH7780_PCI_IO_SIZE-1), + SH7780_PCIIOBR); + pci_write_reg(chan, ((SH7780_PCI_IO_SIZE-1) & (7<<18)), + SH7780_PCIIOBMR); + /* SH7780 init done, set central function init complete */ /* use round robin mode to stop a device starving/overruning */ word = SH4_PCICR_PREFIX | SH4_PCICR_CFIN | SH4_PCICR_FTO; diff --git a/arch/sh/drivers/pci/pci-sh7780.h b/arch/sh/drivers/pci/pci-sh7780.h index 4b65d4b26f7..4a52478c97c 100644 --- a/arch/sh/drivers/pci/pci-sh7780.h +++ b/arch/sh/drivers/pci/pci-sh7780.h @@ -65,11 +65,6 @@ #define SH7780_PCIPMCSR_BSE 0x046 #define SH7780_PCICDD 0x047 -#define SH7780_PCICR 0x100 /* PCI Control Register */ -#define SH7780_PCILSR 0x104 /* PCI Local Space Register0 */ -#define SH7780_PCILSR1 0x108 /* PCI Local Space Register1 */ -#define SH7780_PCILAR0 0x10C /* PCI Local Address Register1 */ -#define SH7780_PCILAR1 0x110 /* PCI Local Address Register1 */ #define SH7780_PCIIR 0x114 /* PCI Interrupt Register */ #define SH7780_PCIIMR 0x118 /* PCI Interrupt Mask Register */ #define SH7780_PCIAIR 0x11C /* Error Address Register */ -- cgit v1.2.3 From f600f6c4824d7e40be370f7e26ab0fbc3f6f911c Mon Sep 17 00:00:00 2001 From: Karsten Wiese Date: Thu, 16 Apr 2009 19:35:01 +0200 Subject: ALSA: us122l: Fix signedness in comparisions Within 2.6.30's mergewindow, struct urb's transfer_buffer_length has become unsigned. This changed an "int > int" comparision to an "unsigned > int" one in snd_usb_122l. Fix this by using a local int variable instead of urb->transfer_buffer_length in comparisions. Shorten playback_prep_freqn() a bit and tweak error-paths in usb_stream_prepare_playback(). Signed-off-by: Karsten Wiese Signed-off-by: Takashi Iwai --- sound/usb/usx2y/usb_stream.c | 67 ++++++++++++++++++++------------------------ 1 file changed, 30 insertions(+), 37 deletions(-) diff --git a/sound/usb/usx2y/usb_stream.c b/sound/usb/usx2y/usb_stream.c index 24393dafcb6..12ae0340adc 100644 --- a/sound/usb/usx2y/usb_stream.c +++ b/sound/usb/usx2y/usb_stream.c @@ -33,32 +33,26 @@ static unsigned usb_stream_next_packet_size(struct usb_stream_kernel *sk) static void playback_prep_freqn(struct usb_stream_kernel *sk, struct urb *urb) { struct usb_stream *s = sk->s; - unsigned l = 0; - int pack; - - urb->iso_frame_desc[0].offset = 0; - urb->iso_frame_desc[0].length = usb_stream_next_packet_size(sk); - sk->out_phase = sk->out_phase_peeked; - urb->transfer_buffer_length = urb->iso_frame_desc[0].length; - - for (pack = 1; pack < sk->n_o_ps; pack++) { - l = usb_stream_next_packet_size(sk); - if (s->idle_outsize + urb->transfer_buffer_length + l > - s->period_size) + int pack, lb = 0; + + for (pack = 0; pack < sk->n_o_ps; pack++) { + int l = usb_stream_next_packet_size(sk); + if (s->idle_outsize + lb + l > s->period_size) goto check; sk->out_phase = sk->out_phase_peeked; - urb->iso_frame_desc[pack].offset = urb->transfer_buffer_length; + urb->iso_frame_desc[pack].offset = lb; urb->iso_frame_desc[pack].length = l; - urb->transfer_buffer_length += l; + lb += l; } - snd_printdd(KERN_DEBUG "%i\n", urb->transfer_buffer_length); + snd_printdd(KERN_DEBUG "%i\n", lb); check: urb->number_of_packets = pack; - s->idle_outsize += urb->transfer_buffer_length - s->period_size; + urb->transfer_buffer_length = lb; + s->idle_outsize += lb - s->period_size; snd_printdd(KERN_DEBUG "idle=%i ul=%i ps=%i\n", s->idle_outsize, - urb->transfer_buffer_length, s->period_size); + lb, s->period_size); } static void init_pipe_urbs(struct usb_stream_kernel *sk, unsigned use_packsize, @@ -282,21 +276,20 @@ static int usb_stream_prepare_playback(struct usb_stream_kernel *sk, struct usb_stream *s = sk->s; struct urb *io; struct usb_iso_packet_descriptor *id, *od; - int p, l = 0; + int p = 0, lb = 0, l = 0; io = sk->idle_outurb; od = io->iso_frame_desc; - io->transfer_buffer_length = 0; - for (p = 0; s->sync_packet < 0; ++p, ++s->sync_packet) { + for (; s->sync_packet < 0; ++p, ++s->sync_packet) { struct urb *ii = sk->completed_inurb; id = ii->iso_frame_desc + ii->number_of_packets + s->sync_packet; l = id->actual_length; od[p].length = l; - od[p].offset = io->transfer_buffer_length; - io->transfer_buffer_length += l; + od[p].offset = lb; + lb += l; } for (; @@ -304,38 +297,38 @@ static int usb_stream_prepare_playback(struct usb_stream_kernel *sk, ++p, ++s->sync_packet) { l = inurb->iso_frame_desc[s->sync_packet].actual_length; - if (s->idle_outsize + io->transfer_buffer_length + l > - s->period_size) + if (s->idle_outsize + lb + l > s->period_size) goto check_ok; od[p].length = l; - od[p].offset = io->transfer_buffer_length; - io->transfer_buffer_length += l; + od[p].offset = lb; + lb += l; } check_ok: s->sync_packet -= inurb->number_of_packets; - if (s->sync_packet < -2 || s->sync_packet > 0) { + if (unlikely(s->sync_packet < -2 || s->sync_packet > 0)) { snd_printk(KERN_WARNING "invalid sync_packet = %i;" " p=%i nop=%i %i %x %x %x > %x\n", s->sync_packet, p, inurb->number_of_packets, - s->idle_outsize + io->transfer_buffer_length + l, - s->idle_outsize, io->transfer_buffer_length, l, + s->idle_outsize + lb + l, + s->idle_outsize, lb, l, s->period_size); return -1; } - if (io->transfer_buffer_length % s->cfg.frame_size) { + if (unlikely(lb % s->cfg.frame_size)) { snd_printk(KERN_WARNING"invalid outsize = %i\n", - io->transfer_buffer_length); + lb); return -1; } - s->idle_outsize += io->transfer_buffer_length - s->period_size; + s->idle_outsize += lb - s->period_size; io->number_of_packets = p; - if (s->idle_outsize > 0) { - snd_printk(KERN_WARNING "idle=%i\n", s->idle_outsize); - return -1; - } - return 0; + io->transfer_buffer_length = lb; + if (s->idle_outsize <= 0) + return 0; + + snd_printk(KERN_WARNING "idle=%i\n", s->idle_outsize); + return -1; } static void prepare_inurb(int number_of_packets, struct urb *iu) -- cgit v1.2.3 From 1a297286868e13274ab02ec0626a00054fb0a5de Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Fri, 17 Apr 2009 11:39:38 +0200 Subject: ASoC: pxa-ssp: Don't use SSCR0_SerClkDiv and SSCR0_SCR Those macros are just screwed as soon as CONFIG_PXA25x is enabled. This patch - changes ssp_set_scr to take an ssp_dev pointer instead of ssp_device - adds a corresponding ssp_get_scr function. Signed-off-by: Philipp Zabel Signed-off-by: Mark Brown --- sound/soc/pxa/pxa-ssp.c | 36 ++++++++++++++++++++++++++++-------- 1 file changed, 28 insertions(+), 8 deletions(-) diff --git a/sound/soc/pxa/pxa-ssp.c b/sound/soc/pxa/pxa-ssp.c index 152118cb5d6..74ff69e3ce3 100644 --- a/sound/soc/pxa/pxa-ssp.c +++ b/sound/soc/pxa/pxa-ssp.c @@ -280,12 +280,33 @@ static int pxa_ssp_resume(struct snd_soc_dai *cpu_dai) * ssp_set_clkdiv - set SSP clock divider * @div: serial clock rate divider */ -static void ssp_set_scr(struct ssp_dev *dev, u32 div) +static void ssp_set_scr(struct ssp_device *ssp, u32 div) { - struct ssp_device *ssp = dev->ssp; - u32 sscr0 = ssp_read_reg(dev->ssp, SSCR0) & ~SSCR0_SCR; + u32 sscr0 = ssp_read_reg(ssp, SSCR0); + + if (cpu_is_pxa25x() && ssp->type == PXA25x_SSP) { + sscr0 &= ~0x0000ff00; + sscr0 |= ((div - 2)/2) << 8; /* 2..512 */ + } else { + sscr0 &= ~0x000fff00; + sscr0 |= (div - 1) << 8; /* 1..4096 */ + } + ssp_write_reg(ssp, SSCR0, sscr0); +} + +/** + * ssp_get_clkdiv - get SSP clock divider + */ +static u32 ssp_get_scr(struct ssp_device *ssp) +{ + u32 sscr0 = ssp_read_reg(ssp, SSCR0); + u32 div; - ssp_write_reg(ssp, SSCR0, (sscr0 | SSCR0_SerClkDiv(div))); + if (cpu_is_pxa25x() && ssp->type == PXA25x_SSP) + div = ((sscr0 >> 8) & 0xff) * 2 + 2; + else + div = ((sscr0 >> 8) & 0xfff) + 1; + return div; } /* @@ -326,7 +347,7 @@ static int pxa_ssp_set_dai_sysclk(struct snd_soc_dai *cpu_dai, break; case PXA_SSP_CLK_AUDIO: priv->sysclk = 0; - ssp_set_scr(&priv->dev, 1); + ssp_set_scr(ssp, 1); sscr0 |= SSCR0_ACS; break; default: @@ -387,7 +408,7 @@ static int pxa_ssp_set_dai_clkdiv(struct snd_soc_dai *cpu_dai, ssp_write_reg(ssp, SSACD, val); break; case PXA_SSP_DIV_SCR: - ssp_set_scr(&priv->dev, div); + ssp_set_scr(ssp, div); break; default: return -ENODEV; @@ -674,8 +695,7 @@ static int pxa_ssp_hw_params(struct snd_pcm_substream *substream, case SND_SOC_DAIFMT_I2S: sspsp = ssp_read_reg(ssp, SSPSP); - if (((sscr0 & SSCR0_SCR) == SSCR0_SerClkDiv(4)) && - (width == 16)) { + if ((ssp_get_scr(ssp) == 4) && (width == 16)) { /* This is a special case where the bitclk is 64fs * and we're not dealing with 2*32 bits of audio * samples. -- cgit v1.2.3 From b08f7a62cafd7998862072a1c353219e3d84bbef Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Fri, 17 Apr 2009 14:42:26 +0300 Subject: ASoC: OMAP: Update contact addresses My email address is going to expire soon so update it. Adding also Peter Ujfalusi as a second contact to OMAP core drivers since I won't have anymore access to non-public OMAP documentation in the future and Peter is working with these drivers as well. Signed-off-by: Jarkko Nikula Cc: Peter Ujfalusi Signed-off-by: Mark Brown --- sound/soc/omap/n810.c | 4 ++-- sound/soc/omap/omap-mcbsp.c | 5 +++-- sound/soc/omap/omap-mcbsp.h | 3 ++- sound/soc/omap/omap-pcm.c | 5 +++-- sound/soc/omap/omap-pcm.h | 3 ++- 5 files changed, 12 insertions(+), 8 deletions(-) diff --git a/sound/soc/omap/n810.c b/sound/soc/omap/n810.c index a6d1178ce12..91ef17992de 100644 --- a/sound/soc/omap/n810.c +++ b/sound/soc/omap/n810.c @@ -3,7 +3,7 @@ * * Copyright (C) 2008 Nokia Corporation * - * Contact: Jarkko Nikula + * Contact: Jarkko Nikula * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -417,6 +417,6 @@ static void __exit n810_soc_exit(void) module_init(n810_soc_init); module_exit(n810_soc_exit); -MODULE_AUTHOR("Jarkko Nikula "); +MODULE_AUTHOR("Jarkko Nikula "); MODULE_DESCRIPTION("ALSA SoC Nokia N810"); MODULE_LICENSE("GPL"); diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c index 90f4df7fd90..91261428384 100644 --- a/sound/soc/omap/omap-mcbsp.c +++ b/sound/soc/omap/omap-mcbsp.c @@ -3,7 +3,8 @@ * * Copyright (C) 2008 Nokia Corporation * - * Contact: Jarkko Nikula + * Contact: Jarkko Nikula + * Peter Ujfalusi * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -532,6 +533,6 @@ static void __exit snd_omap_mcbsp_exit(void) } module_exit(snd_omap_mcbsp_exit); -MODULE_AUTHOR("Jarkko Nikula "); +MODULE_AUTHOR("Jarkko Nikula "); MODULE_DESCRIPTION("OMAP I2S SoC Interface"); MODULE_LICENSE("GPL"); diff --git a/sound/soc/omap/omap-mcbsp.h b/sound/soc/omap/omap-mcbsp.h index df7ad13ba73..c8147aace81 100644 --- a/sound/soc/omap/omap-mcbsp.h +++ b/sound/soc/omap/omap-mcbsp.h @@ -3,7 +3,8 @@ * * Copyright (C) 2008 Nokia Corporation * - * Contact: Jarkko Nikula + * Contact: Jarkko Nikula + * Peter Ujfalusi * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License diff --git a/sound/soc/omap/omap-pcm.c b/sound/soc/omap/omap-pcm.c index 8e1431cb46b..b078ed537bc 100644 --- a/sound/soc/omap/omap-pcm.c +++ b/sound/soc/omap/omap-pcm.c @@ -3,7 +3,8 @@ * * Copyright (C) 2008 Nokia Corporation * - * Contact: Jarkko Nikula + * Contact: Jarkko Nikula + * Peter Ujfalusi * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -367,6 +368,6 @@ static void __exit omap_soc_platform_exit(void) } module_exit(omap_soc_platform_exit); -MODULE_AUTHOR("Jarkko Nikula "); +MODULE_AUTHOR("Jarkko Nikula "); MODULE_DESCRIPTION("OMAP PCM DMA module"); MODULE_LICENSE("GPL"); diff --git a/sound/soc/omap/omap-pcm.h b/sound/soc/omap/omap-pcm.h index e4369bdfd77..8d9d26916b0 100644 --- a/sound/soc/omap/omap-pcm.h +++ b/sound/soc/omap/omap-pcm.h @@ -3,7 +3,8 @@ * * Copyright (C) 2008 Nokia Corporation * - * Contact: Jarkko Nikula + * Contact: Jarkko Nikula + * Peter Ujfalusi * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License -- cgit v1.2.3 From 150ace0db360373d2016a2497d252138a59c5ba8 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Fri, 17 Apr 2009 17:47:31 +0200 Subject: netfilter: ctnetlink: report error if event message allocation fails This patch fixes an inconsistency that results in no error reports to user-space listeners if we fail to allocate the event message. Signed-off-by: Pablo Neira Ayuso Signed-off-by: Patrick McHardy --- net/netfilter/nf_conntrack_netlink.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c index c6439c77953..0ea36e0c8a0 100644 --- a/net/netfilter/nf_conntrack_netlink.c +++ b/net/netfilter/nf_conntrack_netlink.c @@ -512,7 +512,7 @@ static int ctnetlink_conntrack_event(struct notifier_block *this, skb = ctnetlink_alloc_skb(tuple(ct, IP_CT_DIR_ORIGINAL), GFP_ATOMIC); if (!skb) - return NOTIFY_DONE; + goto errout; b = skb->tail; @@ -591,8 +591,9 @@ static int ctnetlink_conntrack_event(struct notifier_block *this, nla_put_failure: rcu_read_unlock(); nlmsg_failure: - nfnetlink_set_err(0, group, -ENOBUFS); kfree_skb(skb); +errout: + nfnetlink_set_err(0, group, -ENOBUFS); return NOTIFY_DONE; } #endif /* CONFIG_NF_CONNTRACK_EVENTS */ @@ -1564,7 +1565,7 @@ static int ctnetlink_expect_event(struct notifier_block *this, skb = alloc_skb(NLMSG_GOODSIZE, GFP_ATOMIC); if (!skb) - return NOTIFY_DONE; + goto errout; b = skb->tail; @@ -1589,8 +1590,9 @@ static int ctnetlink_expect_event(struct notifier_block *this, nla_put_failure: rcu_read_unlock(); nlmsg_failure: - nfnetlink_set_err(0, 0, -ENOBUFS); kfree_skb(skb); +errout: + nfnetlink_set_err(0, 0, -ENOBUFS); return NOTIFY_DONE; } #endif -- cgit v1.2.3 From a0142733a7ef2f3476e63938b330026a08c53f37 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Fri, 17 Apr 2009 17:48:44 +0200 Subject: netfilter: nfnetlink: return ENOMEM if we fail to create netlink socket With this patch, nfnetlink returns -ENOMEM instead of -EPERM if we fail to create the nfnetlink netlink socket during the module loading. This is exactly what rtnetlink does in this case. Ideally, it would be better if we propagate the error that has happened in netlink_kernel_create(), however, this function still does not implement this yet. Signed-off-by: Pablo Neira Ayuso Signed-off-by: Patrick McHardy --- net/netfilter/nfnetlink.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/netfilter/nfnetlink.c b/net/netfilter/nfnetlink.c index 2785d66a7e3..b8ab37ad7ed 100644 --- a/net/netfilter/nfnetlink.c +++ b/net/netfilter/nfnetlink.c @@ -203,7 +203,7 @@ static int __init nfnetlink_init(void) nfnetlink_rcv, NULL, THIS_MODULE); if (!nfnl) { printk(KERN_ERR "cannot initialize nfnetlink!\n"); - return -1; + return -ENOMEM; } return 0; -- cgit v1.2.3 From 7181d4673710888b6d7084b37b9d77ed4f4e41b2 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 15 Apr 2009 21:33:15 +0200 Subject: mac80211: avoid crashing when no scan sdata Using the scan_sdata variable here is terribly wrong, if there has never been a scan then we fail. However, we need a bandaid... Signed-off-by: Johannes Berg Cc: stable@kernel.org [2.6.29] Signed-off-by: John W. Linville --- net/mac80211/mlme.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 1b14d0204dd..dc60804d6dd 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -2113,12 +2113,13 @@ void ieee80211_dynamic_ps_enable_work(struct work_struct *work) struct ieee80211_local *local = container_of(work, struct ieee80211_local, dynamic_ps_enable_work); + /* XXX: using scan_sdata is completely broken! */ struct ieee80211_sub_if_data *sdata = local->scan_sdata; if (local->hw.conf.flags & IEEE80211_CONF_PS) return; - if (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK) + if (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK && sdata) ieee80211_send_nullfunc(local, sdata, 1); local->hw.conf.flags |= IEEE80211_CONF_PS; -- cgit v1.2.3 From 160002fe845218f5789a26954048592c3920ac7b Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 16 Apr 2009 12:15:38 +0200 Subject: cfg80211: copy hold when replacing BSS When we receive a probe response frame we can replace the BSS struct in our list -- but if that struct is held then we need to hold the new one as well. We really should fix this completely and not replace the struct, but this is a bandaid for now. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- net/wireless/scan.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/wireless/scan.c b/net/wireless/scan.c index 2a00e362f5f..4c77669275e 100644 --- a/net/wireless/scan.c +++ b/net/wireless/scan.c @@ -364,6 +364,8 @@ cfg80211_bss_update(struct cfg80211_registered_device *dev, list_replace(&found->list, &res->list); rb_replace_node(&found->rbn, &res->rbn, &dev->bss_tree); + /* XXX: workaround */ + res->hold = found->hold; kref_put(&found->ref, bss_release); found = res; } else if (found) { -- cgit v1.2.3 From cd1658f592a60d028dd2e48d86724b737a82cab0 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 16 Apr 2009 15:00:58 +0200 Subject: cfg80211: do not replace BSS structs Instead, allocate extra IE memory if necessary. Normally, this isn't even necessary since there's enough space. This is a better way of correcting the "held BSS can disappear" issue, but also a lot more code. It is also necessary for proper auth/assoc BSS handling in the future. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- net/wireless/core.h | 2 +- net/wireless/scan.c | 42 +++++++++++++++++++++++++++++++++--------- 2 files changed, 34 insertions(+), 10 deletions(-) diff --git a/net/wireless/core.h b/net/wireless/core.h index d43daa236ef..0a592e4295f 100644 --- a/net/wireless/core.h +++ b/net/wireless/core.h @@ -90,7 +90,7 @@ struct cfg80211_internal_bss { struct rb_node rbn; unsigned long ts; struct kref ref; - bool hold; + bool hold, ies_allocated; /* must be last because of priv member */ struct cfg80211_bss pub; diff --git a/net/wireless/scan.c b/net/wireless/scan.c index 4c77669275e..2ae65b39b52 100644 --- a/net/wireless/scan.c +++ b/net/wireless/scan.c @@ -58,6 +58,10 @@ static void bss_release(struct kref *ref) bss = container_of(ref, struct cfg80211_internal_bss, ref); if (bss->pub.free_priv) bss->pub.free_priv(&bss->pub); + + if (bss->ies_allocated) + kfree(bss->pub.information_elements); + kfree(bss); } @@ -360,21 +364,41 @@ cfg80211_bss_update(struct cfg80211_registered_device *dev, found = rb_find_bss(dev, res); - if (found && overwrite) { - list_replace(&found->list, &res->list); - rb_replace_node(&found->rbn, &res->rbn, - &dev->bss_tree); - /* XXX: workaround */ - res->hold = found->hold; - kref_put(&found->ref, bss_release); - found = res; - } else if (found) { + if (found) { kref_get(&found->ref); found->pub.beacon_interval = res->pub.beacon_interval; found->pub.tsf = res->pub.tsf; found->pub.signal = res->pub.signal; found->pub.capability = res->pub.capability; found->ts = res->ts; + + /* overwrite IEs */ + if (overwrite) { + size_t used = dev->wiphy.bss_priv_size + sizeof(*res); + size_t ielen = res->pub.len_information_elements; + + if (ksize(found) >= used + ielen) { + memcpy(found->pub.information_elements, + res->pub.information_elements, ielen); + found->pub.len_information_elements = ielen; + } else { + u8 *ies = found->pub.information_elements; + + if (found->ies_allocated) { + if (ksize(ies) < ielen) + ies = krealloc(ies, ielen, + GFP_ATOMIC); + } else + ies = kmalloc(ielen, GFP_ATOMIC); + + if (ies) { + memcpy(ies, res->pub.information_elements, ielen); + found->ies_allocated = true; + found->pub.information_elements = ies; + } + } + } + kref_put(&res->ref, bss_release); } else { /* this "consumes" the reference */ -- cgit v1.2.3 From 60375541f7c8a577b977d344565259776c3acfc1 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 17 Apr 2009 00:54:23 +0200 Subject: mac80211: validate TIM IE length The TIM IE must not be shorter than 4 bytes, so verify that when parsing it. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- net/mac80211/mlme.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index dc60804d6dd..1619e0cd26e 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -441,6 +441,9 @@ static bool ieee80211_check_tim(struct ieee802_11_elems *elems, u16 aid) u8 index, indexn1, indexn2; struct ieee80211_tim_ie *tim = (struct ieee80211_tim_ie *) elems->tim; + if (unlikely(!tim || elems->tim_len < 4)) + return false; + aid &= 0x3fff; index = aid / 8; mask = 1 << (aid & 7); -- cgit v1.2.3 From 957b0516f7881284b48f2f2e4a909a1c5de0ddf8 Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Fri, 17 Apr 2009 14:52:23 +0200 Subject: ar9170usb: add ZyXEL NWD271N Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville --- drivers/net/wireless/ar9170/usb.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/wireless/ar9170/usb.c b/drivers/net/wireless/ar9170/usb.c index 43e8d8de9a5..c9e422ead92 100644 --- a/drivers/net/wireless/ar9170/usb.c +++ b/drivers/net/wireless/ar9170/usb.c @@ -69,6 +69,8 @@ static struct usb_device_id ar9170_usb_ids[] = { { USB_DEVICE(0x0846, 0x9001) }, /* Zydas ZD1221 */ { USB_DEVICE(0x0ace, 0x1221) }, + /* ZyXEL NWD271N */ + { USB_DEVICE(0x0586, 0x3417) }, /* Z-Com UB81 BG */ { USB_DEVICE(0x0cde, 0x0023) }, /* Z-Com UB82 ABG */ -- cgit v1.2.3 From 7816a0a862d851d0b05710e7d94bfe390f3180e2 Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Fri, 17 Apr 2009 15:59:23 -0700 Subject: vlan/macvlan: fix NULL pointer dereferences in ethtool handlers Check whether the underlying device provides a set of ethtool ops before checking for individual handlers to avoid NULL pointer dereferences. Reported-by: Art van Breemen Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- drivers/net/macvlan.c | 9 ++++++--- net/8021q/vlan_dev.c | 3 ++- 2 files changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c index 70d3ef4a2c5..214a8cf2b70 100644 --- a/drivers/net/macvlan.c +++ b/drivers/net/macvlan.c @@ -376,7 +376,8 @@ static u32 macvlan_ethtool_get_rx_csum(struct net_device *dev) const struct macvlan_dev *vlan = netdev_priv(dev); struct net_device *lowerdev = vlan->lowerdev; - if (lowerdev->ethtool_ops->get_rx_csum == NULL) + if (lowerdev->ethtool_ops == NULL || + lowerdev->ethtool_ops->get_rx_csum == NULL) return 0; return lowerdev->ethtool_ops->get_rx_csum(lowerdev); } @@ -387,7 +388,8 @@ static int macvlan_ethtool_get_settings(struct net_device *dev, const struct macvlan_dev *vlan = netdev_priv(dev); struct net_device *lowerdev = vlan->lowerdev; - if (!lowerdev->ethtool_ops->get_settings) + if (!lowerdev->ethtool_ops || + !lowerdev->ethtool_ops->get_settings) return -EOPNOTSUPP; return lowerdev->ethtool_ops->get_settings(lowerdev, cmd); @@ -398,7 +400,8 @@ static u32 macvlan_ethtool_get_flags(struct net_device *dev) const struct macvlan_dev *vlan = netdev_priv(dev); struct net_device *lowerdev = vlan->lowerdev; - if (!lowerdev->ethtool_ops->get_flags) + if (!lowerdev->ethtool_ops || + !lowerdev->ethtool_ops->get_flags) return 0; return lowerdev->ethtool_ops->get_flags(lowerdev); } diff --git a/net/8021q/vlan_dev.c b/net/8021q/vlan_dev.c index 1b34135cf99..6b092136401 100644 --- a/net/8021q/vlan_dev.c +++ b/net/8021q/vlan_dev.c @@ -668,7 +668,8 @@ static int vlan_ethtool_get_settings(struct net_device *dev, const struct vlan_dev_info *vlan = vlan_dev_info(dev); struct net_device *real_dev = vlan->real_dev; - if (!real_dev->ethtool_ops->get_settings) + if (!real_dev->ethtool_ops || + !real_dev->ethtool_ops->get_settings) return -EOPNOTSUPP; return real_dev->ethtool_ops->get_settings(real_dev, cmd); -- cgit v1.2.3 From 96f15efcea94545987715f453a8c2b8ea592d000 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Fri, 17 Apr 2009 23:32:20 -0400 Subject: ACPI: Disable _GTS and _BFS support by default Executing BIOS code paths not exercised by Windows tends to get Linux into trouble. However, if a system does benefit from _GTS or _BFS, acpi.gts=1 an acpi.bfs=1 are now available to enable them. http://bugzilla.kernel.org/show_bug.cgi?id=13041 Signed-off-by: Len Brown --- drivers/acpi/acpica/hwsleep.c | 43 ++++++++++++++++++++++++++----------------- drivers/acpi/sleep.c | 27 +++++++++++++++++++++++++++ 2 files changed, 53 insertions(+), 17 deletions(-) diff --git a/drivers/acpi/acpica/hwsleep.c b/drivers/acpi/acpica/hwsleep.c index baa5fc05e12..db307a356f0 100644 --- a/drivers/acpi/acpica/hwsleep.c +++ b/drivers/acpi/acpica/hwsleep.c @@ -211,6 +211,12 @@ acpi_status acpi_enter_sleep_state_prep(u8 sleep_state) ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state_prep) +static unsigned int gts, bfs; +module_param(gts, uint, 0644); +module_param(bfs, uint, 0644); +MODULE_PARM_DESC(gts, "Enable evaluation of _GTS on suspend."); +MODULE_PARM_DESC(bfs, "Enable evaluation of _BFS on resume".); + /******************************************************************************* * * FUNCTION: acpi_enter_sleep_state @@ -278,16 +284,18 @@ acpi_status asmlinkage acpi_enter_sleep_state(u8 sleep_state) return_ACPI_STATUS(status); } - /* Execute the _GTS method */ + if (gts) { + /* Execute the _GTS method */ - arg_list.count = 1; - arg_list.pointer = &arg; - arg.type = ACPI_TYPE_INTEGER; - arg.integer.value = sleep_state; + arg_list.count = 1; + arg_list.pointer = &arg; + arg.type = ACPI_TYPE_INTEGER; + arg.integer.value = sleep_state; - status = acpi_evaluate_object(NULL, METHOD_NAME__GTS, &arg_list, NULL); - if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { - return_ACPI_STATUS(status); + status = acpi_evaluate_object(NULL, METHOD_NAME__GTS, &arg_list, NULL); + if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { + return_ACPI_STATUS(status); + } } /* Get current value of PM1A control */ @@ -513,18 +521,19 @@ acpi_status acpi_leave_sleep_state_prep(u8 sleep_state) } } - /* Execute the _BFS method */ + if (bfs) { + /* Execute the _BFS method */ - arg_list.count = 1; - arg_list.pointer = &arg; - arg.type = ACPI_TYPE_INTEGER; - arg.integer.value = sleep_state; + arg_list.count = 1; + arg_list.pointer = &arg; + arg.type = ACPI_TYPE_INTEGER; + arg.integer.value = sleep_state; - status = acpi_evaluate_object(NULL, METHOD_NAME__BFS, &arg_list, NULL); - if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { - ACPI_EXCEPTION((AE_INFO, status, "During Method _BFS")); + status = acpi_evaluate_object(NULL, METHOD_NAME__BFS, &arg_list, NULL); + if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { + ACPI_EXCEPTION((AE_INFO, status, "During Method _BFS")); + } } - return_ACPI_STATUS(status); } diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c index 779e4e500df..9042875ac94 100644 --- a/drivers/acpi/sleep.c +++ b/drivers/acpi/sleep.c @@ -713,6 +713,32 @@ static void acpi_power_off(void) acpi_enter_sleep_state(ACPI_STATE_S5); } +/* + * ACPI 2.0 created the optional _GTS and _BFS, + * but industry adoption has been neither rapid nor broad. + * + * Linux gets into trouble when it executes poorly validated + * paths through the BIOS, so disable _GTS and _BFS by default, + * but do speak up and offer the option to enable them. + */ +void __init acpi_gts_bfs_check(void) +{ + acpi_handle dummy; + + if (ACPI_SUCCESS(acpi_get_handle(ACPI_ROOT_OBJECT, METHOD_NAME__GTS, &dummy))) + { + printk(KERN_NOTICE PREFIX "BIOS offers _GTS\n"); + printk(KERN_NOTICE PREFIX "If \"acpi.gts=1\" improves suspend, " + "please notify linux-acpi@vger.kernel.org\n"); + } + if (ACPI_SUCCESS(acpi_get_handle(ACPI_ROOT_OBJECT, METHOD_NAME__BFS, &dummy))) + { + printk(KERN_NOTICE PREFIX "BIOS offers _BFS\n"); + printk(KERN_NOTICE PREFIX "If \"acpi.bfs=1\" improves resume, " + "please notify linux-acpi@vger.kernel.org\n"); + } +} + int __init acpi_sleep_init(void) { acpi_status status; @@ -771,5 +797,6 @@ int __init acpi_sleep_init(void) * object can also be evaluated when the system enters S5. */ register_reboot_notifier(&tts_notifier); + acpi_gts_bfs_check(); return 0; } -- cgit v1.2.3 From 67405439bca28c4dbecd3fefd97fbdb282a302d9 Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Tue, 14 Apr 2009 20:16:45 +0100 Subject: thermal: Fix polling frequency for systems without passive cooling The polling interval (in deciseconds) was accidently interpreted as being in milliseconds in one codepath, resulting in excessively frequent polling. Ensure that the conversion is performed. Signed-off-by: Matthew Garrett Acked-by: Zhang Rui Signed-off-by: Len Brown --- drivers/acpi/thermal.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c index 9cd15e8c893..564ea142428 100644 --- a/drivers/acpi/thermal.c +++ b/drivers/acpi/thermal.c @@ -909,7 +909,7 @@ static int acpi_thermal_register_thermal_zone(struct acpi_thermal *tz) thermal_zone_device_register("acpitz", trips, tz, &acpi_thermal_zone_ops, 0, 0, 0, - tz->polling_frequency); + tz->polling_frequency*100); if (IS_ERR(tz->thermal_zone)) return -ENODEV; -- cgit v1.2.3 From 406e988bef742aa74cdc1f5fafc812ecebf7c02b Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Tue, 14 Apr 2009 02:44:10 +0000 Subject: thinkpad-acpi: silence hotkey enable warning for module parameter Avoid the WARN() when the procfs handler for hotkey enable is used by a module parameter. Instead, urge the user to stop doing that. Reported-by: Niel Lambrechts Signed-off-by: Henrique de Moraes Holschuh Signed-off-by: Len Brown --- drivers/platform/x86/thinkpad_acpi.c | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-) diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index a40b075743d..a186c5bbdcd 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -2946,12 +2946,18 @@ static int hotkey_read(char *p) return len; } -static void hotkey_enabledisable_warn(void) +static void hotkey_enabledisable_warn(bool enable) { tpacpi_log_usertask("procfs hotkey enable/disable"); - WARN(1, TPACPI_WARN - "hotkey enable/disable functionality has been " - "removed from the driver. Hotkeys are always enabled.\n"); + if (!WARN((tpacpi_lifecycle == TPACPI_LIFE_RUNNING || !enable), + TPACPI_WARN + "hotkey enable/disable functionality has been " + "removed from the driver. Hotkeys are always " + "enabled\n")) + printk(TPACPI_ERR + "Please remove the hotkey=enable module " + "parameter, it is deprecated. Hotkeys are always " + "enabled\n"); } static int hotkey_write(char *buf) @@ -2971,9 +2977,9 @@ static int hotkey_write(char *buf) res = 0; while ((cmd = next_cmd(&buf))) { if (strlencmp(cmd, "enable") == 0) { - hotkey_enabledisable_warn(); + hotkey_enabledisable_warn(1); } else if (strlencmp(cmd, "disable") == 0) { - hotkey_enabledisable_warn(); + hotkey_enabledisable_warn(0); res = -EPERM; } else if (strlencmp(cmd, "reset") == 0) { mask = hotkey_orig_mask; -- cgit v1.2.3 From 75bd3bf2ade9d548be0d2bde60b5ee0fdce0b127 Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Tue, 14 Apr 2009 02:44:11 +0000 Subject: thinkpad-acpi: fix LED blinking through timer trigger The set_blink hook code in the LED subdriver would never manage to get a LED to blink, and instead it would just turn it on. The consequence of this is that the "timer" trigger would not cause the LED to blink if given default parameters. This problem exists since 2.6.26-rc1. To fix it, switch the deferred LED work handling to use the thinkpad-acpi-specific LED status (off/on/blink) directly. This also makes the code easier to read, and to extend later. Signed-off-by: Henrique de Moraes Holschuh Cc: stable@kernel.org Signed-off-by: Len Brown --- drivers/platform/x86/thinkpad_acpi.c | 41 +++++++++++++++++------------------- 1 file changed, 19 insertions(+), 22 deletions(-) diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index a186c5bbdcd..a1d2abce309 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -303,11 +303,17 @@ static u32 dbg_level; static struct workqueue_struct *tpacpi_wq; +enum led_status_t { + TPACPI_LED_OFF = 0, + TPACPI_LED_ON, + TPACPI_LED_BLINK, +}; + /* Special LED class that can defer work */ struct tpacpi_led_classdev { struct led_classdev led_classdev; struct work_struct work; - enum led_brightness new_brightness; + enum led_status_t new_state; unsigned int led; }; @@ -4213,7 +4219,7 @@ static void light_set_status_worker(struct work_struct *work) container_of(work, struct tpacpi_led_classdev, work); if (likely(tpacpi_lifecycle == TPACPI_LIFE_RUNNING)) - light_set_status((data->new_brightness != LED_OFF)); + light_set_status((data->new_state != TPACPI_LED_OFF)); } static void light_sysfs_set(struct led_classdev *led_cdev, @@ -4223,7 +4229,8 @@ static void light_sysfs_set(struct led_classdev *led_cdev, container_of(led_cdev, struct tpacpi_led_classdev, led_classdev); - data->new_brightness = brightness; + data->new_state = (brightness != LED_OFF) ? + TPACPI_LED_ON : TPACPI_LED_OFF; queue_work(tpacpi_wq, &data->work); } @@ -4730,12 +4737,6 @@ enum { /* For TPACPI_LED_OLD */ TPACPI_LED_EC_HLMS = 0x0e, /* EC reg to select led to command */ }; -enum led_status_t { - TPACPI_LED_OFF = 0, - TPACPI_LED_ON, - TPACPI_LED_BLINK, -}; - static enum led_access_mode led_supported; TPACPI_HANDLE(led, ec, "SLED", /* 570 */ @@ -4847,23 +4848,13 @@ static int led_set_status(const unsigned int led, return rc; } -static void led_sysfs_set_status(unsigned int led, - enum led_brightness brightness) -{ - led_set_status(led, - (brightness == LED_OFF) ? - TPACPI_LED_OFF : - (tpacpi_led_state_cache[led] == TPACPI_LED_BLINK) ? - TPACPI_LED_BLINK : TPACPI_LED_ON); -} - static void led_set_status_worker(struct work_struct *work) { struct tpacpi_led_classdev *data = container_of(work, struct tpacpi_led_classdev, work); if (likely(tpacpi_lifecycle == TPACPI_LIFE_RUNNING)) - led_sysfs_set_status(data->led, data->new_brightness); + led_set_status(data->led, data->new_state); } static void led_sysfs_set(struct led_classdev *led_cdev, @@ -4872,7 +4863,13 @@ static void led_sysfs_set(struct led_classdev *led_cdev, struct tpacpi_led_classdev *data = container_of(led_cdev, struct tpacpi_led_classdev, led_classdev); - data->new_brightness = brightness; + if (brightness == LED_OFF) + data->new_state = TPACPI_LED_OFF; + else if (tpacpi_led_state_cache[data->led] != TPACPI_LED_BLINK) + data->new_state = TPACPI_LED_ON; + else + data->new_state = TPACPI_LED_BLINK; + queue_work(tpacpi_wq, &data->work); } @@ -4890,7 +4887,7 @@ static int led_sysfs_blink_set(struct led_classdev *led_cdev, } else if ((*delay_on != 500) || (*delay_off != 500)) return -EINVAL; - data->new_brightness = TPACPI_LED_BLINK; + data->new_state = TPACPI_LED_BLINK; queue_work(tpacpi_wq, &data->work); return 0; -- cgit v1.2.3 From f68f53a217b827580647d23fdc34eecdcb3739c6 Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Tue, 14 Apr 2009 02:44:12 +0000 Subject: thinkpad-acpi: fix use of MODULE_AUTHOR Fix the module to use one instance of MODULE_AUTHOR per author. Signed-off-by: Henrique de Moraes Holschuh Signed-off-by: Len Brown --- drivers/platform/x86/thinkpad_acpi.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index a1d2abce309..7a7cac264b8 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -7883,7 +7883,8 @@ IBM_BIOS_MODULE_ALIAS("I[BDHIMNOTWVYZ]"); IBM_BIOS_MODULE_ALIAS("1[0368A-GIKM-PST]"); IBM_BIOS_MODULE_ALIAS("K[UX-Z]"); -MODULE_AUTHOR("Borislav Deianov, Henrique de Moraes Holschuh"); +MODULE_AUTHOR("Borislav Deianov "); +MODULE_AUTHOR("Henrique de Moraes Holschuh "); MODULE_DESCRIPTION(TPACPI_DESC); MODULE_VERSION(TPACPI_VERSION); MODULE_LICENSE("GPL"); -- cgit v1.2.3 From 922fe097b1e8f2f2f23dbed61cfe6e0316fecff1 Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Tue, 14 Apr 2009 02:44:13 +0000 Subject: thinkpad-acpi: simplify module autoloading Simplify the module autoloading a great deal, by keying to the HID for the HKEY interface. Only _really_ ancient IBM ThinkPad models like the 240, 240x and 570 lack the HKEY interface, and they're getting their own trimmed-down driver one of these days. Signed-off-by: Henrique de Moraes Holschuh Signed-off-by: Len Brown --- drivers/platform/x86/thinkpad_acpi.c | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-) diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index 7a7cac264b8..caa774ae239 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -7860,6 +7860,15 @@ static int __init thinkpad_acpi_module_init(void) MODULE_ALIAS(TPACPI_DRVR_SHORTNAME); +/* + * This will autoload the driver in almost every ThinkPad + * in widespread use. + * + * Only _VERY_ old models, like the 240, 240x and 570 lack + * the HKEY event interface. + */ +MODULE_DEVICE_TABLE(acpi, ibm_htk_device_ids); + /* * DMI matching for module autoloading * @@ -7872,16 +7881,10 @@ MODULE_ALIAS(TPACPI_DRVR_SHORTNAME); #define IBM_BIOS_MODULE_ALIAS(__type) \ MODULE_ALIAS("dmi:bvnIBM:bvr" __type "ET??WW*") -/* Non-ancient thinkpads */ -MODULE_ALIAS("dmi:bvnIBM:*:svnIBM:*:pvrThinkPad*:rvnIBM:*"); -MODULE_ALIAS("dmi:bvnLENOVO:*:svnLENOVO:*:pvrThinkPad*:rvnLENOVO:*"); - /* Ancient thinkpad BIOSes have to be identified by * BIOS type or model number, and there are far less * BIOS types than model numbers... */ -IBM_BIOS_MODULE_ALIAS("I[BDHIMNOTWVYZ]"); -IBM_BIOS_MODULE_ALIAS("1[0368A-GIKM-PST]"); -IBM_BIOS_MODULE_ALIAS("K[UX-Z]"); +IBM_BIOS_MODULE_ALIAS("I[MU]"); /* 570, 570e */ MODULE_AUTHOR("Borislav Deianov "); MODULE_AUTHOR("Henrique de Moraes Holschuh "); -- cgit v1.2.3 From b57f7e7b836d271902b8b7b1ec8cf9312dc5d228 Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Tue, 14 Apr 2009 02:44:14 +0000 Subject: thinkpad-acpi: bump up version to 0.23 Plenty of high-profile changes, so it deserves a new version number. Features added since 0.22: * Restrict unsafe LEDs * New race-less brightness control strategy for IBM ThinkPads * Disclose TGID of driver access from userspace (debug) * Warn when deprecated functions are used Other changes: * Better debug messages in some subdrivers * Removed "hotkey disable" support, since it breaks the driver * Dropped "ibm-acpi" alias Signed-off-by: Henrique de Moraes Holschuh Signed-off-by: Len Brown --- Documentation/laptops/thinkpad-acpi.txt | 4 ++-- drivers/platform/x86/thinkpad_acpi.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt index 3d7650768bb..e7e9a69069e 100644 --- a/Documentation/laptops/thinkpad-acpi.txt +++ b/Documentation/laptops/thinkpad-acpi.txt @@ -1,7 +1,7 @@ ThinkPad ACPI Extras Driver - Version 0.22 - November 23rd, 2008 + Version 0.23 + April 10th, 2009 Borislav Deianov Henrique de Moraes Holschuh diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index caa774ae239..912be65b626 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -21,7 +21,7 @@ * 02110-1301, USA. */ -#define TPACPI_VERSION "0.22" +#define TPACPI_VERSION "0.23" #define TPACPI_SYSFS_VERSION 0x020300 /* -- cgit v1.2.3 From 516ef69f160fb2f092d71f2cb635a9394ff8a71a Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Sat, 18 Apr 2009 10:11:53 +0100 Subject: ASoC: Fix warning in wm9705 I notice that the fixes were merged, minus one: sound/soc/codecs/wm9705.c: At top level: sound/soc/codecs/wm9705.c:445: warning: initialization from incompatible pointer type so you might find this trivial patch useful. Signed-off-by: Russell King Signed-off-by: Mark Brown --- sound/soc/codecs/wm9705.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/wm9705.c b/sound/soc/codecs/wm9705.c index 6e23a81dba7..c2d1a7a18fa 100644 --- a/sound/soc/codecs/wm9705.c +++ b/sound/soc/codecs/wm9705.c @@ -318,7 +318,7 @@ static int wm9705_reset(struct snd_soc_codec *codec) } #ifdef CONFIG_PM -static int wm9705_soc_suspend(struct platform_device *pdev) +static int wm9705_soc_suspend(struct platform_device *pdev, pm_message_t msg) { struct snd_soc_device *socdev = platform_get_drvdata(pdev); struct snd_soc_codec *codec = socdev->card->codec; -- cgit v1.2.3 From e91fb9137dd235ab959d7675d0e4104974dad5eb Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Fri, 17 Apr 2009 11:37:35 +0200 Subject: [ARM] pxa/palm27x: General fix for Palm27x aSoC driver Firstly, this patch makes the palm27x asoc driver a little more sane. Also, since all affected devices use GPIO95 as AC97_nRESET, this patch sets that properly. Affected are PalmT5, TX and LifeDrive. Signed-off-by: Marek Vasut Signed-off-by: Eric Miao --- arch/arm/mach-pxa/include/mach/palmasoc.h | 7 +------ arch/arm/mach-pxa/palmld.c | 18 +++++++++++++++--- arch/arm/mach-pxa/palmt5.c | 18 +++++++++++++++--- arch/arm/mach-pxa/palmtx.c | 23 ++++++++++++++++++++++- sound/soc/pxa/palm27x.c | 27 +++++++++++++++++++++++---- 5 files changed, 76 insertions(+), 17 deletions(-) diff --git a/arch/arm/mach-pxa/include/mach/palmasoc.h b/arch/arm/mach-pxa/include/mach/palmasoc.h index 6c4b1f7de20..58afb30d529 100644 --- a/arch/arm/mach-pxa/include/mach/palmasoc.h +++ b/arch/arm/mach-pxa/include/mach/palmasoc.h @@ -1,13 +1,8 @@ #ifndef _INCLUDE_PALMASOC_H_ #define _INCLUDE_PALMASOC_H_ + struct palm27x_asoc_info { int jack_gpio; }; -#ifdef CONFIG_SND_PXA2XX_SOC_PALM27X -void __init palm27x_asoc_set_pdata(struct palm27x_asoc_info *data); -#else -static inline void palm27x_asoc_set_pdata(struct palm27x_asoc_info *data) {} -#endif - #endif diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c index ecf5910e39d..1cec1806f00 100644 --- a/arch/arm/mach-pxa/palmld.c +++ b/arch/arm/mach-pxa/palmld.c @@ -477,10 +477,22 @@ static struct wm97xx_batt_info wm97xx_batt_pdata = { /****************************************************************************** * aSoC audio ******************************************************************************/ -static struct palm27x_asoc_info palm27x_asoc_pdata = { +static struct palm27x_asoc_info palmld_asoc_pdata = { .jack_gpio = GPIO_NR_PALMLD_EARPHONE_DETECT, }; +static pxa2xx_audio_ops_t palmld_ac97_pdata = { + .reset_gpio = 95, +}; + +static struct platform_device palmld_asoc = { + .name = "palm27x-asoc", + .id = -1, + .dev = { + .platform_data = &palmld_asoc_pdata, + }, +}; + /****************************************************************************** * Framebuffer ******************************************************************************/ @@ -544,6 +556,7 @@ static struct platform_device *devices[] __initdata = { &palmld_backlight, &palmld_leds, &power_supply, + &palmld_asoc, }; static struct map_desc palmld_io_desc[] __initdata = { @@ -573,11 +586,10 @@ static void __init palmld_init(void) set_pxa_fb_info(&palmld_lcd_screen); pxa_set_mci_info(&palmld_mci_platform_data); - pxa_set_ac97_info(NULL); + pxa_set_ac97_info(&palmld_ac97_pdata); pxa_set_ficp_info(&palmld_ficp_platform_data); pxa_set_keypad_info(&palmld_keypad_platform_data); wm97xx_bat_set_pdata(&wm97xx_batt_pdata); - palm27x_asoc_set_pdata(&palm27x_asoc_pdata); platform_add_devices(devices, ARRAY_SIZE(devices)); } diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c index d7f81068c61..30662363907 100644 --- a/arch/arm/mach-pxa/palmt5.c +++ b/arch/arm/mach-pxa/palmt5.c @@ -420,10 +420,22 @@ static struct wm97xx_batt_info wm97xx_batt_pdata = { /****************************************************************************** * aSoC audio ******************************************************************************/ -static struct palm27x_asoc_info palm27x_asoc_pdata = { +static struct palm27x_asoc_info palmt5_asoc_pdata = { .jack_gpio = GPIO_NR_PALMT5_EARPHONE_DETECT, }; +static pxa2xx_audio_ops_t palmt5_ac97_pdata = { + .reset_gpio = 95, +}; + +static struct platform_device palmt5_asoc = { + .name = "palm27x-asoc", + .id = -1, + .dev = { + .platform_data = &palmt5_asoc_pdata, + }, +}; + /****************************************************************************** * Framebuffer ******************************************************************************/ @@ -486,6 +498,7 @@ static struct platform_device *devices[] __initdata = { #endif &palmt5_backlight, &power_supply, + &palmt5_asoc, }; /* setup udc GPIOs initial state */ @@ -504,12 +517,11 @@ static void __init palmt5_init(void) set_pxa_fb_info(&palmt5_lcd_screen); pxa_set_mci_info(&palmt5_mci_platform_data); palmt5_udc_init(); + pxa_set_ac97_info(&palmt5_ac97_pdata); pxa_set_udc_info(&palmt5_udc_info); - pxa_set_ac97_info(NULL); pxa_set_ficp_info(&palmt5_ficp_platform_data); pxa_set_keypad_info(&palmt5_keypad_platform_data); wm97xx_bat_set_pdata(&wm97xx_batt_pdata); - palm27x_asoc_set_pdata(&palm27x_asoc_pdata); platform_add_devices(devices, ARRAY_SIZE(devices)); } diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c index 14393d0ad8b..e2d44b1a8a9 100644 --- a/arch/arm/mach-pxa/palmtx.c +++ b/arch/arm/mach-pxa/palmtx.c @@ -40,6 +40,7 @@ #include #include #include +#include #include "generic.h" #include "devices.h" @@ -433,6 +434,25 @@ static struct wm97xx_batt_info wm97xx_batt_pdata = { .batt_name = "main-batt", }; +/****************************************************************************** + * aSoC audio + ******************************************************************************/ +static struct palm27x_asoc_info palmtx_asoc_pdata = { + .jack_gpio = GPIO_NR_PALMTX_EARPHONE_DETECT, +}; + +static pxa2xx_audio_ops_t palmtx_ac97_pdata = { + .reset_gpio = 95, +}; + +static struct platform_device palmtx_asoc = { + .name = "palm27x-asoc", + .id = -1, + .dev = { + .platform_data = &palmtx_asoc_pdata, + }, +}; + /****************************************************************************** * Framebuffer ******************************************************************************/ @@ -495,6 +515,7 @@ static struct platform_device *devices[] __initdata = { #endif &palmtx_backlight, &power_supply, + &palmtx_asoc, }; static struct map_desc palmtx_io_desc[] __initdata = { @@ -529,8 +550,8 @@ static void __init palmtx_init(void) set_pxa_fb_info(&palmtx_lcd_screen); pxa_set_mci_info(&palmtx_mci_platform_data); palmtx_udc_init(); + pxa_set_ac97_info(&palmtx_ac97_pdata); pxa_set_udc_info(&palmtx_udc_info); - pxa_set_ac97_info(NULL); pxa_set_ficp_info(&palmtx_ficp_platform_data); pxa_set_keypad_info(&palmtx_keypad_platform_data); wm97xx_bat_set_pdata(&wm97xx_batt_pdata); diff --git a/sound/soc/pxa/palm27x.c b/sound/soc/pxa/palm27x.c index 48a73f64500..44fcc4e01e0 100644 --- a/sound/soc/pxa/palm27x.c +++ b/sound/soc/pxa/palm27x.c @@ -200,7 +200,7 @@ static struct snd_soc_device palm27x_snd_devdata = { static struct platform_device *palm27x_snd_device; -static int __init palm27x_asoc_init(void) +static int palm27x_asoc_probe(struct platform_device *pdev) { int ret; @@ -208,6 +208,10 @@ static int __init palm27x_asoc_init(void) machine_is_palmld())) return -ENODEV; + if (pdev->dev.platform_data) + palm27x_ep_gpio = ((struct palm27x_asoc_info *) + (pdev->dev.platform_data))->jack_gpio; + ret = gpio_request(palm27x_ep_gpio, "Headphone Jack"); if (ret) return ret; @@ -245,16 +249,31 @@ err_alloc: return ret; } -static void __exit palm27x_asoc_exit(void) +static int __devexit palm27x_asoc_remove(struct platform_device *pdev) { free_irq(gpio_to_irq(palm27x_ep_gpio), NULL); gpio_free(palm27x_ep_gpio); platform_device_unregister(palm27x_snd_device); + return 0; } -void __init palm27x_asoc_set_pdata(struct palm27x_asoc_info *data) +static struct platform_driver palm27x_wm9712_driver = { + .probe = palm27x_asoc_probe, + .remove = __devexit_p(palm27x_asoc_remove), + .driver = { + .name = "palm27x-asoc", + .owner = THIS_MODULE, + }, +}; + +static int __init palm27x_asoc_init(void) +{ + return platform_driver_register(&palm27x_wm9712_driver); +} + +static void __exit palm27x_asoc_exit(void) { - palm27x_ep_gpio = data->jack_gpio; + platform_driver_unregister(&palm27x_wm9712_driver); } module_init(palm27x_asoc_init); -- cgit v1.2.3 From a48dc30da44769ea3f3562c18f54878a9a3e78a1 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Wed, 15 Apr 2009 13:56:08 +0200 Subject: [ARM] pxa/pcm990: start external GPIOs immediately after built-in ones As a result of an off-by-1 error pcm990 leaves one unused GPIO number between built-in GPIOs and the pca9536 extender. Fix it. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Eric Miao --- arch/arm/mach-pxa/pcm990-baseboard.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c index 6112740b4ae..6c12b5a3132 100644 --- a/arch/arm/mach-pxa/pcm990-baseboard.c +++ b/arch/arm/mach-pxa/pcm990-baseboard.c @@ -377,7 +377,7 @@ struct pxacamera_platform_data pcm990_pxacamera_platform_data = { #include static struct pca953x_platform_data pca9536_data = { - .gpio_base = NR_BUILTIN_GPIO + 1, + .gpio_base = NR_BUILTIN_GPIO, }; static int gpio_bus_switch; @@ -405,9 +405,9 @@ static unsigned long pcm990_camera_query_bus_param(struct soc_camera_link *link) int ret; if (!gpio_bus_switch) { - ret = gpio_request(NR_BUILTIN_GPIO + 1, "camera"); + ret = gpio_request(NR_BUILTIN_GPIO, "camera"); if (!ret) { - gpio_bus_switch = NR_BUILTIN_GPIO + 1; + gpio_bus_switch = NR_BUILTIN_GPIO; gpio_direction_output(gpio_bus_switch, 0); } else gpio_bus_switch = -EINVAL; -- cgit v1.2.3 From e2139b32726e5dd184974c785ea3f62026590801 Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Thu, 26 Mar 2009 16:41:56 +0200 Subject: Bluetooth: Fix removing of RFCOMM DLC timer with DEFER_SETUP There is a missing call to rfcomm_dlc_clear_timer in the case that DEFER_SETUP is used and so the connection gets disconnected after the timeout even if it was successfully accepted previously. This patch adds a call to rfcomm_dlc_clear_timer to rfcomm_dlc_accept which will get called when the user accepts the connection by calling read() on the socket. Signed-off-by: Johan Hedberg Signed-off-by: Marcel Holtmann --- net/bluetooth/rfcomm/core.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/bluetooth/rfcomm/core.c b/net/bluetooth/rfcomm/core.c index 1d0fb0f23c6..374536e050a 100644 --- a/net/bluetooth/rfcomm/core.c +++ b/net/bluetooth/rfcomm/core.c @@ -1194,6 +1194,8 @@ void rfcomm_dlc_accept(struct rfcomm_dlc *d) rfcomm_send_ua(d->session, d->dlci); + rfcomm_dlc_clear_timer(d); + rfcomm_dlc_lock(d); d->state = BT_CONNECTED; d->state_change(d, 0); -- cgit v1.2.3 From 732547f96ea2442965a24e0ed529d285321a0fff Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Sun, 19 Apr 2009 19:14:14 +0200 Subject: Bluetooth: Fallback from eSCO to SCO on unspecified error Some Bluetooth chips (like the ones from Texas Instruments) don't do proper eSCO negotiations inside the Link Manager. They just return an error code and in case of the Kyocera ED-8800 headset it is just a random error. < HCI Command: Setup Synchronous Connection 0x01|0x0028) plen 17 handle 1 voice setting 0x0060 > HCI Event: Command Status (0x0f) plen 4 Setup Synchronous Connection (0x01|0x0028) status 0x00 ncmd 1 > HCI Event: Synchronous Connect Complete (0x2c) plen 17 status 0x1f handle 257 bdaddr 00:14:0A:xx:xx:xx type eSCO Error: Unspecified Error In these cases it is up to the host stack to fallback to a SCO setup and so retry with SCO parameters. Based on a report by Nick Pelly Signed-off-by: Marcel Holtmann --- net/bluetooth/hci_event.c | 26 +++++++++++++++++--------- 1 file changed, 17 insertions(+), 9 deletions(-) diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c index 55534244c3a..963f9662eaa 100644 --- a/net/bluetooth/hci_event.c +++ b/net/bluetooth/hci_event.c @@ -1646,20 +1646,28 @@ static inline void hci_sync_conn_complete_evt(struct hci_dev *hdev, struct sk_bu conn->type = SCO_LINK; } - if (conn->out && ev->status == 0x1c && conn->attempt < 2) { - conn->pkt_type = (hdev->esco_type & SCO_ESCO_MASK) | - (hdev->esco_type & EDR_ESCO_MASK); - hci_setup_sync(conn, conn->link->handle); - goto unlock; - } - - if (!ev->status) { + switch (ev->status) { + case 0x00: conn->handle = __le16_to_cpu(ev->handle); conn->state = BT_CONNECTED; hci_conn_add_sysfs(conn); - } else + break; + + case 0x1c: /* SCO interval rejected */ + case 0x1f: /* Unspecified error */ + if (conn->out && conn->attempt < 2) { + conn->pkt_type = (hdev->esco_type & SCO_ESCO_MASK) | + (hdev->esco_type & EDR_ESCO_MASK); + hci_setup_sync(conn, conn->link->handle); + goto unlock; + } + /* fall through */ + + default: conn->state = BT_CLOSED; + break; + } hci_proto_connect_cfm(conn, ev->status); if (ev->status) -- cgit v1.2.3 From 9499237a1c42a27fbcc7ed1d59e34df2b574cdfb Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Sun, 19 Apr 2009 19:30:03 +0200 Subject: Bluetooth: Add workaround for wrong HCI event in eSCO setup The Broadcom chips with 2.1 firmware handle the fallback case to a SCO link wrongly when setting up eSCO connections. < HCI Command: Setup Synchronous Connection (0x01|0x0028) plen 17 handle 11 voice setting 0x0060 > HCI Event: Command Status (0x0f) plen 4 Setup Synchronous Connection (0x01|0x0028) status 0x00 ncmd 1 > HCI Event: Connect Complete (0x03) plen 11 status 0x00 handle 1 bdaddr 00:1E:3A:xx:xx:xx type SCO encrypt 0x01 The Link Manager negotiates the fallback to SCO, but then sends out a Connect Complete event. This is wrong and the Link Manager should actually send a Synchronous Connection Complete event if the Setup Synchronous Connection has been used. Only the remote side is allowed to use Connect Complete to indicate the missing support for eSCO in the host stack. This patch adds a workaround for this which clearly should not be needed, but reality is that broken Broadcom devices are deployed. Based on a report by Ville Tervo Signed-off-by: Marcel Holtman --- net/bluetooth/hci_event.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c index 963f9662eaa..15f40ea8d54 100644 --- a/net/bluetooth/hci_event.c +++ b/net/bluetooth/hci_event.c @@ -866,8 +866,16 @@ static inline void hci_conn_complete_evt(struct hci_dev *hdev, struct sk_buff *s hci_dev_lock(hdev); conn = hci_conn_hash_lookup_ba(hdev, ev->link_type, &ev->bdaddr); - if (!conn) - goto unlock; + if (!conn) { + if (ev->link_type != SCO_LINK) + goto unlock; + + conn = hci_conn_hash_lookup_ba(hdev, ESCO_LINK, &ev->bdaddr); + if (!conn) + goto unlock; + + conn->type = SCO_LINK; + } if (!ev->status) { conn->handle = __le16_to_cpu(ev->handle); -- cgit v1.2.3 From 093f13e23137b9e5f7629dd5932ceea1419e2b61 Mon Sep 17 00:00:00 2001 From: "Pallipadi, Venkatesh" Date: Wed, 15 Apr 2009 10:37:33 -0700 Subject: x86, acpi_cpufreq: Fix the NULL pointer dereference in get_measured_perf Fix for a regression that was introduced by earlier commit 18b2646fe3babeb40b34a0c1751e0bf5adfdc64c on Mon Apr 6 11:26:08 2009 Regression resulted in the below error happened on systems with software coordination where per_cpu acpi data will not be initiated for secondary CPUs in a P-state domain. On Tue, 2009-04-14 at 23:01 -0700, Zhang, Yanmin wrote: My machine hanged with kernel 2.6.30-rc2 when script read > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor. > > opps happens in get_measured_perf: > > cur.aperf.whole = readin.aperf.whole - > per_cpu(drv_data, cpu)->saved_aperf; > > Because per_cpu(drv_data, cpu)=NULL. > > So function get_measured_perf should check if (per_cpu(drv_data, > cpu)==NULL) > and return 0 if it's NULL. --------------sys log------------------ BUG: unable to handle kernel NULL pointer dereference at 0000000000000020 IP: [] get_measured_perf+0x4a/0xf9 PGD a7dd88067 PUD a7ccf5067 PMD 0 Oops: 0000 [#1] SMP last sysfs file: /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor CPU 0 Modules linked in: video output Pid: 2091, comm: kondemand/0 Not tainted 2.6.30-rc2 #1 MP Server RIP: 0010:[] [] get_measured_perf+0x4a/0xf9 RSP: 0018:ffff880a7d56de20 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 00000046241a42b6 RCX: ffff88004d219000 RDX: 000000000000b660 RSI: 0000000000000020 RDI: 0000000000000001 RBP: ffff880a7f052000 R08: 00000046241a42b6 R09: ffffffff807639f0 R10: 00000000ffffffea R11: ffffffff802207f4 R12: ffff880a7f052000 R13: ffff88004d20e460 R14: 0000000000ddd5a6 R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff88004d200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 0000000000000020 CR3: 0000000a7f1bf000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process kondemand/0 (pid: 2091, threadinfo ffff880a7d56c000, task ffff880a7d4d18c0) Stack: ffff880a7f052078 ffffffff803efd54 00000046241a42b6 000000462ffa9e95 0000000000000001 0000000000000001 00000000ffffffea ffffffff8064f41a 0000000000000012 0000000000000012 ffff880a7f052000 ffffffff80650547 Call Trace: [] ? kobject_get+0x12/0x17 [] ? __cpufreq_driver_getavg+0x42/0x57 [] ? do_dbs_timer+0x147/0x272 [] ? do_dbs_timer+0x0/0x272 [] ? worker_thread+0x15b/0x1f5 [] ? autoremove_wake_function+0x0/0x2e [] ? worker_thread+0x0/0x1f5 [] ? kthread+0x54/0x83 [] ? child_rip+0xa/0x20 [] ? kthread+0x0/0x83 [] ? child_rip+0x0/0x20 Code: 99 a6 03 00 31 c9 85 c0 0f 85 c3 00 00 00 89 df 4c 8b 44 24 10 48 c7 c2 60 b6 00 00 48 8b 0c fd e0 30 a5 80 4c 89 c3 48 8b 04 0a <48> 2b 58 20 48 8b 44 24 18 48 89 1c 24 48 8b 34 0a 48 2b 46 28 RIP [] get_measured_perf+0x4a/0xf9 RSP CR2: 0000000000000020 ---[ end trace 2b8fac9a49e19ad4 ]--- Tested-by: "Zhang, Yanmin" Signed-off-by: Venkatesh Pallipadi Signed-off-by: Len Brown --- arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c index ecdb682ab51..dd0bd76d14c 100644 --- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c +++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c @@ -68,11 +68,16 @@ struct acpi_cpufreq_data { unsigned int max_freq; unsigned int resume; unsigned int cpu_feature; - u64 saved_aperf, saved_mperf; }; static DEFINE_PER_CPU(struct acpi_cpufreq_data *, drv_data); +struct acpi_msr_data { + u64 saved_aperf, saved_mperf; +}; + +static DEFINE_PER_CPU(struct acpi_msr_data, msr_data); + DEFINE_TRACE(power_mark); /* acpi_perf_data is a pointer to percpu data. */ @@ -287,11 +292,11 @@ static unsigned int get_measured_perf(struct cpufreq_policy *policy, return 0; cur.aperf.whole = readin.aperf.whole - - per_cpu(drv_data, cpu)->saved_aperf; + per_cpu(msr_data, cpu).saved_aperf; cur.mperf.whole = readin.mperf.whole - - per_cpu(drv_data, cpu)->saved_mperf; - per_cpu(drv_data, cpu)->saved_aperf = readin.aperf.whole; - per_cpu(drv_data, cpu)->saved_mperf = readin.mperf.whole; + per_cpu(msr_data, cpu).saved_mperf; + per_cpu(msr_data, cpu).saved_aperf = readin.aperf.whole; + per_cpu(msr_data, cpu).saved_mperf = readin.mperf.whole; #ifdef __i386__ /* -- cgit v1.2.3 From e0e8c4e512e92bc25c19bd8d4926de17d2f8fbf2 Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Fri, 17 Apr 2009 16:22:06 +0200 Subject: acpi-cpufreq: Cleanup: Use printk_once Signed-off-by: Thomas Renninger Signed-off-by: Len Brown --- arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c index dd0bd76d14c..4eab747a896 100644 --- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c +++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c @@ -693,13 +693,9 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy) /* Check for high latency (>20uS) from buggy BIOSes, like on T42 */ if (perf->control_register.space_id == ACPI_ADR_SPACE_FIXED_HARDWARE && policy->cpuinfo.transition_latency > 20 * 1000) { - static int print_once; policy->cpuinfo.transition_latency = 20 * 1000; - if (!print_once) { - print_once = 1; - printk(KERN_INFO "Capping off P-state tranision latency" - " at 20 uS\n"); - } + printk_once(KERN_INFO "Capping off P-state tranision" + " latency at 20 uS\n"); } data->max_freq = perf->states[0].core_frequency * 1000; -- cgit v1.2.3 From d91758f5ddb80e91176fa2cf80c88c1633950b3d Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Fri, 17 Apr 2009 16:22:07 +0200 Subject: acpi-cpufreq: style-only: add parens to math expression Signed-off-by: Thomas Renninger Signed-off-by: Len Brown --- arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c index 4eab747a896..aec3161abed 100644 --- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c +++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c @@ -340,7 +340,7 @@ static unsigned int get_measured_perf(struct cpufreq_policy *policy, #endif - retval = per_cpu(drv_data, policy->cpu)->max_freq * perf_percent / 100; + retval = (per_cpu(drv_data, policy->cpu)->max_freq * perf_percent) / 100; return retval; } -- cgit v1.2.3 From d876dfbbf5c8728102fb4f683450fa9ae3259cda Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Fri, 17 Apr 2009 16:22:08 +0200 Subject: acpi-cpufreq: Do not let get_measured perf depend on internal variable Take already available policy->cpuinfo.max_freq and get rid of acpi-cpufreq specific max_freq variable. This implies that P0 is always the highest frequency which should always be true as ACPI spec says: As a result, the zeroth entry describes the highest performance state Signed-off-by: Thomas Renninger Acked-by: Venkatesh Pallipadi Signed-off-by: Len Brown --- arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c index aec3161abed..208ecf6643d 100644 --- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c +++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c @@ -65,7 +65,6 @@ enum { struct acpi_cpufreq_data { struct acpi_processor_performance *acpi_data; struct cpufreq_frequency_table *freq_table; - unsigned int max_freq; unsigned int resume; unsigned int cpu_feature; }; @@ -340,7 +339,7 @@ static unsigned int get_measured_perf(struct cpufreq_policy *policy, #endif - retval = (per_cpu(drv_data, policy->cpu)->max_freq * perf_percent) / 100; + retval = (policy->cpuinfo.max_freq * perf_percent) / 100; return retval; } @@ -698,7 +697,6 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy) " latency at 20 uS\n"); } - data->max_freq = perf->states[0].core_frequency * 1000; /* table init */ for (i = 0; i < perf->state_count; i++) { if (i > 0 && perf->states[i].core_frequency >= @@ -717,6 +715,9 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy) if (result) goto err_freqfree; + if (perf->states[0].core_frequency * 1000 != policy->cpuinfo.max_freq) + printk(KERN_WARNING FW_WARN "P-state 0 is not max freq\n"); + switch (perf->control_register.space_id) { case ACPI_ADR_SPACE_SYSTEM_IO: /* Current speed is unknown and not detectable by IO port */ -- cgit v1.2.3 From 90af2cf6205bfc8def8c5a64c9134031d60b10fb Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Tue, 14 Apr 2009 11:02:18 +0800 Subject: ACPI video: fix an error when the brightness levels on AC and on Battery are same when the brightness level on AC and brightness level on Battery are same, the level_ac_battery is 1 in the current code, which is wrong. Signed-off-by: Zhang Rui Signed-off-by: Len Brown --- drivers/acpi/video.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index cd4fb7543a9..21968ae6ed9 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -770,10 +770,12 @@ acpi_video_init_brightness(struct acpi_video_device *device) * In this case, the first two elements in _BCL packages * are also supported brightness levels that OS should take care of. */ - for (i = 2; i < count; i++) - if (br->levels[i] == br->levels[0] || - br->levels[i] == br->levels[1]) + for (i = 2; i < count; i++) { + if (br->levels[i] == br->levels[0]) level_ac_battery++; + if (br->levels[i] == br->levels[1]) + level_ac_battery++; + } if (level_ac_battery < 2) { level_ac_battery = 2 - level_ac_battery; -- cgit v1.2.3 From 9ade1217c9ba39ad2f004a898ddfbb815fd5fe74 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 20 Apr 2009 15:38:25 +0900 Subject: sh: pci: Drop asm-generic/pci.h, so we can use our own fixups. The new PCI code wants its own bus<->resource mappings instead of the generic equivalents, so drop the asm-generic include in preparation. Signed-off-by: Paul Mundt --- arch/sh/drivers/pci/pci.c | 14 ++++++++++++++ arch/sh/include/asm/pci.h | 27 ++++++++++++++++++++++++--- 2 files changed, 38 insertions(+), 3 deletions(-) diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c index 8aaacc99b71..6d659cd93c9 100644 --- a/arch/sh/drivers/pci/pci.c +++ b/arch/sh/drivers/pci/pci.c @@ -72,6 +72,20 @@ void __devinit __weak pcibios_fixup_bus(struct pci_bus *bus) pci_read_bridge_bases(bus); } +void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, + struct resource *res) +{ + region->start = res->start; + region->end = res->end; +} + +void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, + struct pci_bus_region *region) +{ + res->start = region->start; + res->end = region->end; +} + void pcibios_align_resource(void *data, struct resource *res, resource_size_t size, resource_size_t align) __attribute__ ((weak)); diff --git a/arch/sh/include/asm/pci.h b/arch/sh/include/asm/pci.h index bb2c2fcddc9..69cb615c391 100644 --- a/arch/sh/include/asm/pci.h +++ b/arch/sh/include/asm/pci.h @@ -146,13 +146,34 @@ int pcibios_map_platform_irq(struct pci_dev *dev, u8 slot, u8 pin); int pciauto_assign_resources(int busno, struct pci_channel *hose); #endif -#endif /* __KERNEL__ */ +extern void pcibios_resource_to_bus(struct pci_dev *dev, + struct pci_bus_region *region, struct resource *res); + +extern void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, + struct pci_bus_region *region); + +static inline struct resource * +pcibios_select_root(struct pci_dev *pdev, struct resource *res) +{ + struct resource *root = NULL; + + if (res->flags & IORESOURCE_IO) + root = &ioport_resource; + if (res->flags & IORESOURCE_MEM) + root = &iomem_resource; -/* generic pci stuff */ -#include + return root; +} + +/* Chances are this interrupt is wired PC-style ... */ +static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel) +{ + return channel ? 15 : 14; +} /* generic DMA-mapping stuff */ #include +#endif /* __KERNEL__ */ #endif /* __ASM_SH_PCI_H */ -- cgit v1.2.3 From 4c5107e44514a9bde74d0af77982705d602d9e39 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 20 Apr 2009 15:43:36 +0900 Subject: sh: pci: Split out new-style PCI core. This splits off a 'pci-new.c' which is aimed at gradually replacing the pci-auto backend and the arch/sh/drivers/pci/pci.c core respectively. Signed-off-by: Paul Mundt --- arch/sh/drivers/pci/Kconfig | 10 +- arch/sh/drivers/pci/Makefile | 4 +- arch/sh/drivers/pci/pci-new.c | 248 ++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 258 insertions(+), 4 deletions(-) create mode 100644 arch/sh/drivers/pci/pci-new.c diff --git a/arch/sh/drivers/pci/Kconfig b/arch/sh/drivers/pci/Kconfig index 7e816ededed..efe8cf965a9 100644 --- a/arch/sh/drivers/pci/Kconfig +++ b/arch/sh/drivers/pci/Kconfig @@ -18,10 +18,17 @@ config SH_PCIDMA_NONCOHERENT bridge integrated with your SH CPU, refer carefully to the chip specs to see if you can say 'N' here. Otherwise, leave it as 'Y'. +# Temporary config option for transitioning off of PCI_AUTO +config PCI_NEW + bool + depends on PCI + default y if CPU_SUBTYPE_SH7763 || CPU_SUBTYPE_SH7780 || \ + CPU_SUBTYPE_SH7785 + # This is also board-specific config PCI_AUTO bool - depends on PCI + depends on PCI && !PCI_NEW default y config PCI_AUTO_UPDATE_RESOURCES @@ -34,4 +41,3 @@ config PCI_AUTO_UPDATE_RESOURCES for some reason, you have a board that simply refuses to work with its resources updated beyond what they are when the device is powered up, set this to N. Everyone else will want this as Y. - diff --git a/arch/sh/drivers/pci/Makefile b/arch/sh/drivers/pci/Makefile index 5003971476e..362a1eec73a 100644 --- a/arch/sh/drivers/pci/Makefile +++ b/arch/sh/drivers/pci/Makefile @@ -2,8 +2,8 @@ # Makefile for the PCI specific kernel interface routines under Linux. # -obj-y += pci.o -obj-$(CONFIG_PCI_AUTO) += pci-auto.o +obj-$(CONFIG_PCI_AUTO) := pci.o pci-auto.o +obj-$(CONFIG_PCI_NEW) := pci-new.o obj-$(CONFIG_CPU_SUBTYPE_SH7751) += pci-sh7751.o ops-sh4.o obj-$(CONFIG_CPU_SUBTYPE_SH7751R) += pci-sh7751.o ops-sh4.o diff --git a/arch/sh/drivers/pci/pci-new.c b/arch/sh/drivers/pci/pci-new.c new file mode 100644 index 00000000000..097eb881112 --- /dev/null +++ b/arch/sh/drivers/pci/pci-new.c @@ -0,0 +1,248 @@ +/* + * New-style PCI core. + * + * Copyright (c) 2002 M. R. Brown + * Copyright (c) 2004 - 2009 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include +#include + +static int __init pcibios_init(void) +{ + struct pci_channel *p; + struct pci_bus *bus; + int busno; + + /* init channels */ + busno = 0; + for (p = board_pci_channels; p->init; p++) { + if (p->init(p) == 0) + p->enabled = 1; + else + pr_err("Unable to init pci channel %d\n", busno); + busno++; + } + + /* scan the buses */ + busno = 0; + for (p = board_pci_channels; p->init; p++) { + if (p->enabled) { + bus = pci_scan_bus(busno, p->pci_ops, p); + busno = bus->subordinate + 1; + + pci_bus_size_bridges(bus); + pci_bus_assign_resources(bus); + pci_enable_bridges(bus); + } + } + + pci_fixup_irqs(pci_common_swizzle, pcibios_map_platform_irq); + + dma_debug_add_bus(&pci_bus_type); + + return 0; +} +subsys_initcall(pcibios_init); + +static void pcibios_fixup_device_resources(struct pci_dev *dev, + struct pci_bus *bus) +{ + /* Update device resources. */ + struct pci_channel *chan = bus->sysdata; + unsigned long offset = 0; + int i; + + for (i = 0; i < PCI_NUM_RESOURCES; i++) { + if (!dev->resource[i].start) + continue; + if (dev->resource[i].flags & IORESOURCE_PCI_FIXED) + continue; + if (dev->resource[i].flags & IORESOURCE_IO) + offset = chan->io_base; + else if (dev->resource[i].flags & IORESOURCE_MEM) + offset = 0; + + dev->resource[i].start += offset; + dev->resource[i].end += offset; + } +} + + +/* + * Called after each bus is probed, but before its children + * are examined. + */ +void __devinit __weak pcibios_fixup_bus(struct pci_bus *bus) +{ + struct pci_dev *dev = bus->self; + struct list_head *ln; + struct pci_channel *chan = bus->sysdata; + + if (!dev) { + bus->resource[0] = chan->io_resource; + bus->resource[1] = chan->mem_resource; + } + + for (ln = bus->devices.next; ln != &bus->devices; ln = ln->next) { + dev = pci_dev_b(ln); + + if ((dev->class >> 8) != PCI_CLASS_BRIDGE_PCI) + pcibios_fixup_device_resources(dev, bus); + } +} + +void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, + struct resource *res) +{ + struct pci_channel *chan = dev->sysdata; + unsigned long offset = 0; + + if (res->flags & IORESOURCE_IO) + offset = chan->io_base; + else if (res->flags & IORESOURCE_MEM) + offset = 0; + + region->start = res->start - offset; + region->end = res->end - offset; +} + +void __devinit +pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, + struct pci_bus_region *region) +{ + struct pci_channel *chan = dev->sysdata; + unsigned long offset = 0; + + if (res->flags & IORESOURCE_IO) + offset = chan->io_base; + else if (res->flags & IORESOURCE_MEM) + offset = 0; + + res->start = region->start + offset; + res->end = region->end + offset; +} + +void pcibios_align_resource(void *data, struct resource *res, + resource_size_t size, resource_size_t align) + __attribute__ ((weak)); + +/* + * We need to avoid collisions with `mirrored' VGA ports + * and other strange ISA hardware, so we always want the + * addresses to be allocated in the 0x000-0x0ff region + * modulo 0x400. + */ +void pcibios_align_resource(void *data, struct resource *res, + resource_size_t size, resource_size_t align) +{ + if (res->flags & IORESOURCE_IO) { + resource_size_t start = res->start; + + if (start & 0x300) { + start = (start + 0x3ff) & ~0x3ff; + res->start = start; + } + } +} + +int pcibios_enable_device(struct pci_dev *dev, int mask) +{ + u16 cmd, old_cmd; + int idx; + struct resource *r; + + pci_read_config_word(dev, PCI_COMMAND, &cmd); + old_cmd = cmd; + for(idx=0; idx<6; idx++) { + if (!(mask & (1 << idx))) + continue; + r = &dev->resource[idx]; + if (!r->start && r->end) { + printk(KERN_ERR "PCI: Device %s not available because " + "of resource collisions\n", pci_name(dev)); + return -EINVAL; + } + if (r->flags & IORESOURCE_IO) + cmd |= PCI_COMMAND_IO; + if (r->flags & IORESOURCE_MEM) + cmd |= PCI_COMMAND_MEMORY; + } + if (dev->resource[PCI_ROM_RESOURCE].start) + cmd |= PCI_COMMAND_MEMORY; + if (cmd != old_cmd) { + printk(KERN_INFO "PCI: Enabling device %s (%04x -> %04x)\n", + pci_name(dev), old_cmd, cmd); + pci_write_config_word(dev, PCI_COMMAND, cmd); + } + return 0; +} + +/* + * If we set up a device for bus mastering, we need to check and set + * the latency timer as it may not be properly set. + */ +static unsigned int pcibios_max_latency = 255; + +void pcibios_set_master(struct pci_dev *dev) +{ + u8 lat; + pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat); + if (lat < 16) + lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency; + else if (lat > pcibios_max_latency) + lat = pcibios_max_latency; + else + return; + printk(KERN_INFO "PCI: Setting latency timer of device %s to %d\n", + pci_name(dev), lat); + pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat); +} + +void __init pcibios_update_irq(struct pci_dev *dev, int irq) +{ + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq); +} + +void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen) +{ + resource_size_t start = pci_resource_start(dev, bar); + resource_size_t len = pci_resource_len(dev, bar); + unsigned long flags = pci_resource_flags(dev, bar); + + if (unlikely(!len || !start)) + return NULL; + if (maxlen && len > maxlen) + len = maxlen; + + /* + * Presently the IORESOURCE_MEM case is a bit special, most + * SH7751 style PCI controllers have PCI memory at a fixed + * location in the address space where no remapping is desired. + * With the IORESOURCE_MEM case more care has to be taken + * to inhibit page table mapping for legacy cores, but this is + * punted off to __ioremap(). + * -- PFM. + */ + if (flags & IORESOURCE_IO) + return ioport_map(start, len); + if (flags & IORESOURCE_MEM) + return ioremap(start, len); + + return NULL; +} +EXPORT_SYMBOL(pci_iomap); + +void pci_iounmap(struct pci_dev *dev, void __iomem *addr) +{ + iounmap(addr); +} +EXPORT_SYMBOL(pci_iounmap); + +EXPORT_SYMBOL(board_pci_channels); -- cgit v1.2.3 From 9833385131fc4e8c52f95320ab899051d1c06831 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 20 Apr 2009 15:51:45 +0900 Subject: sh: pci: HAVE_PCI_MMAP support. Derived from the MIPS version, now uses pgprot_noncached(). Signed-off-by: Paul Mundt --- arch/sh/drivers/pci/Makefile | 6 +++--- arch/sh/drivers/pci/pci-lib.c | 26 ++++++++++++++++++++++++++ arch/sh/include/asm/pci.h | 3 +++ 3 files changed, 32 insertions(+), 3 deletions(-) create mode 100644 arch/sh/drivers/pci/pci-lib.c diff --git a/arch/sh/drivers/pci/Makefile b/arch/sh/drivers/pci/Makefile index 362a1eec73a..c8eab14843e 100644 --- a/arch/sh/drivers/pci/Makefile +++ b/arch/sh/drivers/pci/Makefile @@ -1,9 +1,9 @@ # # Makefile for the PCI specific kernel interface routines under Linux. # - -obj-$(CONFIG_PCI_AUTO) := pci.o pci-auto.o -obj-$(CONFIG_PCI_NEW) := pci-new.o +obj-y += pci-lib.o +obj-$(CONFIG_PCI_AUTO) += pci.o pci-auto.o +obj-$(CONFIG_PCI_NEW) += pci-new.o obj-$(CONFIG_CPU_SUBTYPE_SH7751) += pci-sh7751.o ops-sh4.o obj-$(CONFIG_CPU_SUBTYPE_SH7751R) += pci-sh7751.o ops-sh4.o diff --git a/arch/sh/drivers/pci/pci-lib.c b/arch/sh/drivers/pci/pci-lib.c new file mode 100644 index 00000000000..1a43a350d57 --- /dev/null +++ b/arch/sh/drivers/pci/pci-lib.c @@ -0,0 +1,26 @@ +#include +#include +#include +#include +#include + +int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, + enum pci_mmap_state mmap_state, int write_combine) +{ + /* + * I/O space can be accessed via normal processor loads and stores on + * this platform but for now we elect not to do this and portable + * drivers should not do this anyway. + */ + if (mmap_state == pci_mmap_io) + return -EINVAL; + + /* + * Ignore write-combine; for now only return uncached mappings. + */ + vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); + + return remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff, + vma->vm_end - vma->vm_start, + vma->vm_page_prot); +} diff --git a/arch/sh/include/asm/pci.h b/arch/sh/include/asm/pci.h index 69cb615c391..46afd449739 100644 --- a/arch/sh/include/asm/pci.h +++ b/arch/sh/include/asm/pci.h @@ -40,6 +40,9 @@ extern struct pci_channel board_pci_channels[]; struct pci_dev; +#define HAVE_PCI_MMAP +extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, + enum pci_mmap_state mmap_state, int write_combine); extern void pcibios_set_master(struct pci_dev *dev); static inline void pcibios_penalize_isa_irq(int irq, int active) -- cgit v1.2.3 From a3c0e0d0032d5bbfd7dc04827a257c717d432a5b Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 20 Apr 2009 16:14:29 +0900 Subject: sh: pci: Consolidate pcibios_align_resource() definitions. This introduces a saner pcibios_align_resource() that can be used regardless of whether pci-auto or pci-new are being used, and consolidates it in pci-lib.c. Signed-off-by: Paul Mundt --- arch/sh/boards/mach-se/7751/pci.c | 9 ++++++--- arch/sh/drivers/pci/pci-lib.c | 42 +++++++++++++++++++++++++++++++++++++++ arch/sh/drivers/pci/pci-new.c | 23 --------------------- arch/sh/drivers/pci/pci.c | 23 --------------------- arch/sh/include/asm/pci.h | 5 +---- 5 files changed, 49 insertions(+), 53 deletions(-) diff --git a/arch/sh/boards/mach-se/7751/pci.c b/arch/sh/boards/mach-se/7751/pci.c index 203b2923fe7..9ec64a416b3 100644 --- a/arch/sh/boards/mach-se/7751/pci.c +++ b/arch/sh/boards/mach-se/7751/pci.c @@ -30,6 +30,9 @@ #define PCIC_WRITE(x,v) writel((v), PCI_REG(x)) #define PCIC_READ(x) readl(PCI_REG(x)) +#define xPCIBIOS_MIN_IO board_pci_channels->io_resource->start +#define xPCIBIOS_MIN_MEM board_pci_channels->mem_resource->start + /* * Description: This function sets up and initializes the pcic, sets * up the BARS, maps the DRAM into the address space etc, etc. @@ -97,12 +100,12 @@ int __init pcibios_init_platform(void) * meaning all calls go straight through... use BUG_ON to * catch erroneous assumption. */ - BUG_ON(PCIBIOS_MIN_MEM != SH7751_PCI_MEMORY_BASE); + BUG_ON(xPCIBIOS_MIN_MEM != SH7751_PCI_MEMORY_BASE); - PCIC_WRITE(SH7751_PCIMBR, PCIBIOS_MIN_MEM); + PCIC_WRITE(SH7751_PCIMBR, xPCIBIOS_MIN_MEM); /* Set IOBR for window containing area specified in pci.h */ - PCIC_WRITE(SH7751_PCIIOBR, (PCIBIOS_MIN_IO & SH7751_PCIIOBR_MASK)); + PCIC_WRITE(SH7751_PCIIOBR, (xPCIBIOS_MIN_IO & SH7751_PCIIOBR_MASK)); /* All done, may as well say so... */ printk("SH7751 PCI: Finished initialization of the PCI controller\n"); diff --git a/arch/sh/drivers/pci/pci-lib.c b/arch/sh/drivers/pci/pci-lib.c index 1a43a350d57..8ab1a2d1b48 100644 --- a/arch/sh/drivers/pci/pci-lib.c +++ b/arch/sh/drivers/pci/pci-lib.c @@ -4,6 +4,41 @@ #include #include +unsigned long PCIBIOS_MIN_IO = 0x0000; +unsigned long PCIBIOS_MIN_MEM = 0; + +/* + * We need to avoid collisions with `mirrored' VGA ports + * and other strange ISA hardware, so we always want the + * addresses to be allocated in the 0x000-0x0ff region + * modulo 0x400. + */ +void pcibios_align_resource(void *data, struct resource *res, + resource_size_t size, resource_size_t align) +{ + struct pci_dev *dev = data; + struct pci_channel *chan = dev->sysdata; + resource_size_t start = res->start; + + if (res->flags & IORESOURCE_IO) { + if (start < PCIBIOS_MIN_IO + chan->io_resource->start) + start = PCIBIOS_MIN_IO + chan->io_resource->start; + + /* + * Put everything into 0x00-0xff region modulo 0x400. + */ + if (start & 0x300) { + start = (start + 0x3ff) & ~0x3ff; + res->start = start; + } + } else if (res->flags & IORESOURCE_MEM) { + if (start < PCIBIOS_MIN_MEM + chan->mem_resource->start) + start = PCIBIOS_MIN_MEM + chan->mem_resource->start; + } + + res->start = start; +} + int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, enum pci_mmap_state mmap_state, int write_combine) { @@ -24,3 +59,10 @@ int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, vma->vm_end - vma->vm_start, vma->vm_page_prot); } + +#ifdef CONFIG_HOTPLUG +EXPORT_SYMBOL(pcibios_resource_to_bus); +EXPORT_SYMBOL(pcibios_bus_to_resource); +EXPORT_SYMBOL(PCIBIOS_MIN_IO); +EXPORT_SYMBOL(PCIBIOS_MIN_MEM); +#endif diff --git a/arch/sh/drivers/pci/pci-new.c b/arch/sh/drivers/pci/pci-new.c index 097eb881112..4e9251f3d09 100644 --- a/arch/sh/drivers/pci/pci-new.c +++ b/arch/sh/drivers/pci/pci-new.c @@ -129,29 +129,6 @@ pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, res->end = region->end + offset; } -void pcibios_align_resource(void *data, struct resource *res, - resource_size_t size, resource_size_t align) - __attribute__ ((weak)); - -/* - * We need to avoid collisions with `mirrored' VGA ports - * and other strange ISA hardware, so we always want the - * addresses to be allocated in the 0x000-0x0ff region - * modulo 0x400. - */ -void pcibios_align_resource(void *data, struct resource *res, - resource_size_t size, resource_size_t align) -{ - if (res->flags & IORESOURCE_IO) { - resource_size_t start = res->start; - - if (start & 0x300) { - start = (start + 0x3ff) & ~0x3ff; - res->start = start; - } - } -} - int pcibios_enable_device(struct pci_dev *dev, int mask) { u16 cmd, old_cmd; diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c index 6d659cd93c9..f670988e033 100644 --- a/arch/sh/drivers/pci/pci.c +++ b/arch/sh/drivers/pci/pci.c @@ -86,29 +86,6 @@ void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, res->end = region->end; } -void pcibios_align_resource(void *data, struct resource *res, - resource_size_t size, resource_size_t align) - __attribute__ ((weak)); - -/* - * We need to avoid collisions with `mirrored' VGA ports - * and other strange ISA hardware, so we always want the - * addresses to be allocated in the 0x000-0x0ff region - * modulo 0x400. - */ -void pcibios_align_resource(void *data, struct resource *res, - resource_size_t size, resource_size_t align) -{ - if (res->flags & IORESOURCE_IO) { - resource_size_t start = res->start; - - if (start & 0x300) { - start = (start + 0x3ff) & ~0x3ff; - res->start = start; - } - } -} - int pcibios_enable_device(struct pci_dev *dev, int mask) { u16 cmd, old_cmd; diff --git a/arch/sh/include/asm/pci.h b/arch/sh/include/asm/pci.h index 46afd449739..5212bf6dd4b 100644 --- a/arch/sh/include/asm/pci.h +++ b/arch/sh/include/asm/pci.h @@ -33,10 +33,7 @@ struct pci_channel { */ extern struct pci_channel board_pci_channels[]; -/* ugly as hell, but makes drivers/pci/setup-res.c compile and work */ -#define __PCI_CHAN(bus) ((struct pci_channel *)bus->sysdata) -#define PCIBIOS_MIN_IO __PCI_CHAN(bus)->io_resource->start -#define PCIBIOS_MIN_MEM __PCI_CHAN(bus)->mem_resource->start +extern unsigned long PCIBIOS_MIN_IO, PCIBIOS_MIN_MEM; struct pci_dev; -- cgit v1.2.3 From 394b6d2fe624246e258a218dac68d44fe9a8411f Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 20 Apr 2009 16:18:46 +0900 Subject: sh: pci: Kill off unused pcibios_fixup(). This is left over cruft that hasn't been used by anything in a long time, kill off bits that weren't purged previously. Signed-off-by: Paul Mundt --- arch/sh/drivers/pci/ops-snapgear.c | 5 ----- arch/sh/include/asm/pci.h | 1 - 2 files changed, 6 deletions(-) diff --git a/arch/sh/drivers/pci/ops-snapgear.c b/arch/sh/drivers/pci/ops-snapgear.c index dd2c5df2830..b64f2b91be8 100644 --- a/arch/sh/drivers/pci/ops-snapgear.c +++ b/arch/sh/drivers/pci/ops-snapgear.c @@ -85,8 +85,3 @@ int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) return irq; } - -void __init pcibios_fixup(void) -{ - /* Nothing to fixup .. */ -} diff --git a/arch/sh/include/asm/pci.h b/arch/sh/include/asm/pci.h index 5212bf6dd4b..e8265fd0bb6 100644 --- a/arch/sh/include/asm/pci.h +++ b/arch/sh/include/asm/pci.h @@ -138,7 +138,6 @@ static inline void __iomem *__get_pci_io_base(unsigned long port, #endif /* Board-specific fixup routines. */ -void pcibios_fixup(void); int pcibios_init_platform(void); int pcibios_map_platform_irq(struct pci_dev *dev, u8 slot, u8 pin); -- cgit v1.2.3 From 0bb34a6bf1f71d5ad2abfda582a2c2794957bc7b Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 20 Apr 2009 16:38:00 +0900 Subject: sh: pci: Consolidate pci_iomap() and use the generic I/O base. This consolidates the pci_iomap() definitions and reworks how the I/O port base is handled. PCI channels can register their own I/O map base, or if none is provided, the system-wide generic I/O base is used instead. Functionally nothing changes, while this allows us to kill off lots of I/O address special casing and lookups. Signed-off-by: Paul Mundt --- arch/sh/drivers/pci/pci-lib.c | 51 +++++++++++++++++++++++++++++++++++++++++++ arch/sh/drivers/pci/pci-new.c | 35 ----------------------------- arch/sh/drivers/pci/pci.c | 35 ----------------------------- arch/sh/include/asm/pci.h | 22 ++----------------- arch/sh/kernel/io.c | 4 ---- 5 files changed, 53 insertions(+), 94 deletions(-) diff --git a/arch/sh/drivers/pci/pci-lib.c b/arch/sh/drivers/pci/pci-lib.c index 8ab1a2d1b48..654ffcc67d0 100644 --- a/arch/sh/drivers/pci/pci-lib.c +++ b/arch/sh/drivers/pci/pci-lib.c @@ -60,6 +60,57 @@ int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, vma->vm_page_prot); } +static void __iomem *ioport_map_pci(struct pci_dev *dev, + unsigned long port, unsigned int nr) +{ + struct pci_channel *chan = dev->sysdata; + + if (!chan->io_map_base) + chan->io_map_base = generic_io_base; + + return (void __iomem *)(chan->io_map_base + port); +} + +void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen) +{ + resource_size_t start = pci_resource_start(dev, bar); + resource_size_t len = pci_resource_len(dev, bar); + unsigned long flags = pci_resource_flags(dev, bar); + + if (unlikely(!len || !start)) + return NULL; + if (maxlen && len > maxlen) + len = maxlen; + + if (flags & IORESOURCE_IO) + return ioport_map_pci(dev, start, len); + + /* + * Presently the IORESOURCE_MEM case is a bit special, most + * SH7751 style PCI controllers have PCI memory at a fixed + * location in the address space where no remapping is desired. + * With the IORESOURCE_MEM case more care has to be taken + * to inhibit page table mapping for legacy cores, but this is + * punted off to __ioremap(). + * -- PFM. + */ + if (flags & IORESOURCE_MEM) { + if (flags & IORESOURCE_CACHEABLE) + return ioremap(start, len); + + return ioremap_nocache(start, len); + } + + return NULL; +} +EXPORT_SYMBOL(pci_iomap); + +void pci_iounmap(struct pci_dev *dev, void __iomem *addr) +{ + iounmap(addr); +} +EXPORT_SYMBOL(pci_iounmap); + #ifdef CONFIG_HOTPLUG EXPORT_SYMBOL(pcibios_resource_to_bus); EXPORT_SYMBOL(pcibios_bus_to_resource); diff --git a/arch/sh/drivers/pci/pci-new.c b/arch/sh/drivers/pci/pci-new.c index 4e9251f3d09..c92e65045c6 100644 --- a/arch/sh/drivers/pci/pci-new.c +++ b/arch/sh/drivers/pci/pci-new.c @@ -187,39 +187,4 @@ void __init pcibios_update_irq(struct pci_dev *dev, int irq) pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq); } -void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen) -{ - resource_size_t start = pci_resource_start(dev, bar); - resource_size_t len = pci_resource_len(dev, bar); - unsigned long flags = pci_resource_flags(dev, bar); - - if (unlikely(!len || !start)) - return NULL; - if (maxlen && len > maxlen) - len = maxlen; - - /* - * Presently the IORESOURCE_MEM case is a bit special, most - * SH7751 style PCI controllers have PCI memory at a fixed - * location in the address space where no remapping is desired. - * With the IORESOURCE_MEM case more care has to be taken - * to inhibit page table mapping for legacy cores, but this is - * punted off to __ioremap(). - * -- PFM. - */ - if (flags & IORESOURCE_IO) - return ioport_map(start, len); - if (flags & IORESOURCE_MEM) - return ioremap(start, len); - - return NULL; -} -EXPORT_SYMBOL(pci_iomap); - -void pci_iounmap(struct pci_dev *dev, void __iomem *addr) -{ - iounmap(addr); -} -EXPORT_SYMBOL(pci_iounmap); - EXPORT_SYMBOL(board_pci_channels); diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c index f670988e033..d39f24091ad 100644 --- a/arch/sh/drivers/pci/pci.c +++ b/arch/sh/drivers/pci/pci.c @@ -144,39 +144,4 @@ void __init pcibios_update_irq(struct pci_dev *dev, int irq) pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq); } -void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen) -{ - resource_size_t start = pci_resource_start(dev, bar); - resource_size_t len = pci_resource_len(dev, bar); - unsigned long flags = pci_resource_flags(dev, bar); - - if (unlikely(!len || !start)) - return NULL; - if (maxlen && len > maxlen) - len = maxlen; - - /* - * Presently the IORESOURCE_MEM case is a bit special, most - * SH7751 style PCI controllers have PCI memory at a fixed - * location in the address space where no remapping is desired. - * With the IORESOURCE_MEM case more care has to be taken - * to inhibit page table mapping for legacy cores, but this is - * punted off to __ioremap(). - * -- PFM. - */ - if (flags & IORESOURCE_IO) - return ioport_map(start, len); - if (flags & IORESOURCE_MEM) - return ioremap(start, len); - - return NULL; -} -EXPORT_SYMBOL(pci_iomap); - -void pci_iounmap(struct pci_dev *dev, void __iomem *addr) -{ - iounmap(addr); -} -EXPORT_SYMBOL(pci_iounmap); - EXPORT_SYMBOL(board_pci_channels); diff --git a/arch/sh/include/asm/pci.h b/arch/sh/include/asm/pci.h index e8265fd0bb6..53242828977 100644 --- a/arch/sh/include/asm/pci.h +++ b/arch/sh/include/asm/pci.h @@ -26,6 +26,8 @@ struct pci_channel { int enabled; unsigned long reg_base; unsigned long io_base; + + unsigned long io_map_base; }; /* @@ -110,31 +112,11 @@ static inline int __is_pci_memory(unsigned long phys_addr, unsigned long size) } return 0; } - -static inline void __iomem *__get_pci_io_base(unsigned long port, - unsigned long size) -{ - struct pci_channel *p; - struct resource *res; - - for (p = board_pci_channels; p->init; p++) { - res = p->io_resource; - if (p->enabled && (port >= res->start) && - (port + size) <= (res->end + 1)) - return (void __iomem *)(p->io_base + port); - } - return NULL; -} #else static inline int __is_pci_memory(unsigned long phys_addr, unsigned long size) { return 0; } -static inline void __iomem *__get_pci_io_base(unsigned long port, - unsigned long size) -{ - return NULL; -} #endif /* Board-specific fixup routines. */ diff --git a/arch/sh/kernel/io.c b/arch/sh/kernel/io.c index 59fb020718a..4f85fffaa55 100644 --- a/arch/sh/kernel/io.c +++ b/arch/sh/kernel/io.c @@ -70,10 +70,6 @@ void __iomem *ioport_map(unsigned long port, unsigned int nr) if (ret) return ret; - ret = __get_pci_io_base(port, nr); - if (ret) - return ret; - return __ioport_map(port, nr); } EXPORT_SYMBOL(ioport_map); -- cgit v1.2.3 From 3851c66cf0d130ae49f99fe1dea42950d9835037 Mon Sep 17 00:00:00 2001 From: Divy Le Ray Date: Fri, 17 Apr 2009 12:21:11 +0000 Subject: cxgb3: fix link fault handling Use the existing periodic task to handle link faults. The link fault interrupt handler is also called in work queue context, which is wrong and might cause potential deadlocks. Signed-off-by: Divy Le Ray Signed-off-by: David S. Miller --- drivers/net/cxgb3/cxgb3_main.c | 22 ++-------------------- drivers/net/cxgb3/t3_hw.c | 11 +---------- 2 files changed, 3 insertions(+), 30 deletions(-) diff --git a/drivers/net/cxgb3/cxgb3_main.c b/drivers/net/cxgb3/cxgb3_main.c index ab0e5febef8..9fdfe0bfaec 100644 --- a/drivers/net/cxgb3/cxgb3_main.c +++ b/drivers/net/cxgb3/cxgb3_main.c @@ -2493,6 +2493,7 @@ static void check_link_status(struct adapter *adapter) spin_lock_irq(&adapter->work_lock); if (p->link_fault) { + t3_link_fault(adapter, i); spin_unlock_irq(&adapter->work_lock); continue; } @@ -2554,9 +2555,7 @@ static void t3_adap_check_task(struct work_struct *work) adapter->check_task_cnt++; - /* Check link status for PHYs without interrupts */ - if (p->linkpoll_period) - check_link_status(adapter); + check_link_status(adapter); /* Accumulate MAC stats if needed */ if (!p->linkpoll_period || @@ -2680,21 +2679,6 @@ void t3_os_ext_intr_handler(struct adapter *adapter) spin_unlock(&adapter->work_lock); } -static void link_fault_task(struct work_struct *work) -{ - struct adapter *adapter = container_of(work, struct adapter, - link_fault_handler_task); - int i; - - for_each_port(adapter, i) { - struct net_device *netdev = adapter->port[i]; - struct port_info *pi = netdev_priv(netdev); - - if (pi->link_fault) - t3_link_fault(adapter, i); - } -} - void t3_os_link_fault_handler(struct adapter *adapter, int port_id) { struct net_device *netdev = adapter->port[port_id]; @@ -2702,7 +2686,6 @@ void t3_os_link_fault_handler(struct adapter *adapter, int port_id) spin_lock(&adapter->work_lock); pi->link_fault = 1; - queue_work(cxgb3_wq, &adapter->link_fault_handler_task); spin_unlock(&adapter->work_lock); } @@ -3082,7 +3065,6 @@ static int __devinit init_one(struct pci_dev *pdev, INIT_LIST_HEAD(&adapter->adapter_list); INIT_WORK(&adapter->ext_intr_handler_task, ext_intr_task); - INIT_WORK(&adapter->link_fault_handler_task, link_fault_task); INIT_WORK(&adapter->fatal_error_handler_task, fatal_error_task); INIT_DELAYED_WORK(&adapter->adap_check_task, t3_adap_check_task); diff --git a/drivers/net/cxgb3/t3_hw.c b/drivers/net/cxgb3/t3_hw.c index 31ed31a3428..e1bd690ff83 100644 --- a/drivers/net/cxgb3/t3_hw.c +++ b/drivers/net/cxgb3/t3_hw.c @@ -1202,7 +1202,6 @@ void t3_link_changed(struct adapter *adapter, int port_id) struct cphy *phy = &pi->phy; struct cmac *mac = &pi->mac; struct link_config *lc = &pi->link_config; - int force_link_down = 0; phy->ops->get_link_status(phy, &link_ok, &speed, &duplex, &fc); @@ -1218,14 +1217,9 @@ void t3_link_changed(struct adapter *adapter, int port_id) status = t3_read_reg(adapter, A_XGM_INT_STATUS + mac->offset); if (status & F_LINKFAULTCHANGE) { mac->stats.link_faults++; - force_link_down = 1; + pi->link_fault = 1; } t3_open_rx_traffic(mac, rx_cfg, rx_hash_high, rx_hash_low); - - if (force_link_down) { - t3_os_link_fault_handler(adapter, port_id); - return; - } } if (lc->requested_fc & PAUSE_AUTONEG) @@ -1292,9 +1286,6 @@ void t3_link_fault(struct adapter *adapter, int port_id) /* Account link faults only when the phy reports a link up */ if (link_ok) mac->stats.link_faults++; - - msleep(1000); - t3_os_link_fault_handler(adapter, port_id); } else { if (link_ok) t3_write_reg(adapter, A_XGM_XAUI_ACT_CTRL + mac->offset, -- cgit v1.2.3 From c80b0c28caed5cd9165caab6295ed86b4e9fc327 Mon Sep 17 00:00:00 2001 From: Divy Le Ray Date: Fri, 17 Apr 2009 12:21:17 +0000 Subject: cxgb3: fix workqueue flush issues The fatal error task can be scheduled while processing an offload packet in NAPI context when the connection handle is bogus. this can race with the ports being brought down and the cxgb3 workqueue being flushed. Stop napi processing before flushing the work queue. The ULP drivers (iSCSI, iWARP) might also schedule a task on keventd_wk while releasing a connection handle (cxgb3_offload.c::cxgb3_queue_tid_release()). The driver however does not flush any work on keventd_wq while being unloaded. This patch also fixes this. Also call cancel_delayed_work_sync in place of the the deprecated cancel_rearming_delayed_workqueue. Signed-off-by: Divy Le Ray Signed-off-by: David S. Miller --- drivers/net/cxgb3/cxgb3_main.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/net/cxgb3/cxgb3_main.c b/drivers/net/cxgb3/cxgb3_main.c index 9fdfe0bfaec..99b5032afda 100644 --- a/drivers/net/cxgb3/cxgb3_main.c +++ b/drivers/net/cxgb3/cxgb3_main.c @@ -1117,8 +1117,8 @@ static void cxgb_down(struct adapter *adapter) spin_unlock_irq(&adapter->work_lock); free_irq_resources(adapter); - flush_workqueue(cxgb3_wq); /* wait for external IRQ handler */ quiesce_rx(adapter); + flush_workqueue(cxgb3_wq); /* wait for external IRQ handler */ } static void schedule_chk_task(struct adapter *adap) @@ -1187,6 +1187,9 @@ static int offload_close(struct t3cdev *tdev) sysfs_remove_group(&tdev->lldev->dev.kobj, &offload_attr_group); + /* Flush work scheduled while releasing TIDs */ + flush_scheduled_work(); + tdev->lldev = NULL; cxgb3_set_dummy_ops(tdev); t3_tp_set_offload_mode(adapter, 0); @@ -1247,8 +1250,7 @@ static int cxgb_close(struct net_device *dev) spin_unlock_irq(&adapter->work_lock); if (!(adapter->open_device_map & PORT_MASK)) - cancel_rearming_delayed_workqueue(cxgb3_wq, - &adapter->adap_check_task); + cancel_delayed_work_sync(&adapter->adap_check_task); if (!adapter->open_device_map) cxgb_down(adapter); -- cgit v1.2.3 From 2c2f409f32d55d901b28b4e9a06c40e9d899ad25 Mon Sep 17 00:00:00 2001 From: Divy Le Ray Date: Fri, 17 Apr 2009 12:21:22 +0000 Subject: cxgb3: Fix potential msi-x vector leak Release vectors when a MSI-X allocation fails. Signed-off-by: Divy Le Ray Signed-off-by: David S. Miller --- drivers/net/cxgb3/cxgb3_main.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/net/cxgb3/cxgb3_main.c b/drivers/net/cxgb3/cxgb3_main.c index 99b5032afda..cbd59fe618a 100644 --- a/drivers/net/cxgb3/cxgb3_main.c +++ b/drivers/net/cxgb3/cxgb3_main.c @@ -2917,8 +2917,13 @@ static int __devinit cxgb_enable_msix(struct adapter *adap) while ((err = pci_enable_msix(adap->pdev, entries, vectors)) > 0) vectors = err; - if (!err && vectors < (adap->params.nports + 1)) + if (err < 0) + pci_disable_msix(adap->pdev); + + if (!err && vectors < (adap->params.nports + 1)) { + pci_disable_msix(adap->pdev); err = -1; + } if (!err) { for (i = 0; i < vectors; ++i) -- cgit v1.2.3 From e8d19370734f11e5880bb9ae2125f586e9e5d15c Mon Sep 17 00:00:00 2001 From: Divy Le Ray Date: Fri, 17 Apr 2009 12:21:27 +0000 Subject: cxgb3: Fix EEH final recovery attempt EEH attempts to recover up 6 times. The last attempt leaves all the ports and adapter down.hen The driver is then unloaded, bringing the adapter down again unconditionally. The unload will hang. Check if the adapter is already down before trying to bring it down again. Signed-off-by: Divy Le Ray Signed-off-by: David S. Miller --- drivers/net/cxgb3/cxgb3_main.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/net/cxgb3/cxgb3_main.c b/drivers/net/cxgb3/cxgb3_main.c index cbd59fe618a..7ea48414c6c 100644 --- a/drivers/net/cxgb3/cxgb3_main.c +++ b/drivers/net/cxgb3/cxgb3_main.c @@ -1235,6 +1235,10 @@ static int cxgb_close(struct net_device *dev) struct port_info *pi = netdev_priv(dev); struct adapter *adapter = pi->adapter; + + if (!adapter->open_device_map) + return 0; + /* Stop link fault interrupts */ t3_xgm_intr_disable(adapter, pi->port_id); t3_read_reg(adapter, A_XGM_INT_STATUS + pi->mac.offset); @@ -2823,6 +2827,9 @@ static pci_ers_result_t t3_io_error_detected(struct pci_dev *pdev, struct adapter *adapter = pci_get_drvdata(pdev); int ret; + if (state == pci_channel_io_perm_failure) + return PCI_ERS_RESULT_DISCONNECT; + ret = t3_adapter_error(adapter, 0); /* Request a slot reset. */ -- cgit v1.2.3 From c7c1a0f60b90955855ba8cd9cfc480167bf6c3da Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Fri, 17 Apr 2009 04:19:36 +0000 Subject: ax25: proc uid file misses header This has been broken for a while. I happened to catch it testing because one app "knew" that the top line of the calls data was the policy line and got confused. Put the header back. Signed-off-by: Alan Cox Signed-off-by: David S. Miller --- net/ax25/ax25_uid.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/net/ax25/ax25_uid.c b/net/ax25/ax25_uid.c index 57aeba729ba..832bcf092a0 100644 --- a/net/ax25/ax25_uid.c +++ b/net/ax25/ax25_uid.c @@ -148,9 +148,13 @@ static void *ax25_uid_seq_start(struct seq_file *seq, loff_t *pos) { struct ax25_uid_assoc *pt; struct hlist_node *node; - int i = 0; + int i = 1; read_lock(&ax25_uid_lock); + + if (*pos == 0) + return SEQ_START_TOKEN; + ax25_uid_for_each(pt, node, &ax25_uid_list) { if (i == *pos) return pt; @@ -162,8 +166,10 @@ static void *ax25_uid_seq_start(struct seq_file *seq, loff_t *pos) static void *ax25_uid_seq_next(struct seq_file *seq, void *v, loff_t *pos) { ++*pos; - - return hlist_entry(((ax25_uid_assoc *)v)->uid_node.next, + if (v == SEQ_START_TOKEN) + return ax25_uid_list.first; + else + return hlist_entry(((ax25_uid_assoc *)v)->uid_node.next, ax25_uid_assoc, uid_node); } -- cgit v1.2.3 From 8caf153974f2274301e583fda732cc8e5b80331f Mon Sep 17 00:00:00 2001 From: Jarek Poplawski Date: Fri, 17 Apr 2009 10:08:49 +0000 Subject: net: sch_netem: Fix an inconsistency in ingress netem timestamps. Alex Sidorenko reported: "while experimenting with 'netem' we have found some strange behaviour. It seemed that ingress delay as measured by 'ping' command shows up on some hosts but not on others. After some investigation I have found that the problem is that skbuff->tstamp field value depends on whether there are any packet sniffers enabled. That is: - if any ptype_all handler is registered, the tstamp field is as expected - if there are no ptype_all handlers, the tstamp field does not show the delay" This patch prevents unnecessary update of tstamp in dev_queue_xmit_nit() on ingress path (with act_mirred) adding a check, so minimal overhead on the fast path, but only when sniffers etc. are active. Since netem at ingress seems to logically emulate a network before a host, tstamp is zeroed to trigger the update and pretend delays are from the outside. Reported-by: Alex Sidorenko Tested-by: Alex Sidorenko Signed-off-by: Jarek Poplawski Signed-off-by: David S. Miller --- net/core/dev.c | 5 +++++ net/sched/sch_netem.c | 8 ++++++++ 2 files changed, 13 insertions(+) diff --git a/net/core/dev.c b/net/core/dev.c index 343883f65ea..dcc357e4f91 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -1336,7 +1336,12 @@ static void dev_queue_xmit_nit(struct sk_buff *skb, struct net_device *dev) { struct packet_type *ptype; +#ifdef CONFIG_NET_CLS_ACT + if (!(skb->tstamp.tv64 && (G_TC_FROM(skb->tc_verd) & AT_INGRESS))) + net_timestamp(skb); +#else net_timestamp(skb); +#endif rcu_read_lock(); list_for_each_entry_rcu(ptype, &ptype_all, list) { diff --git a/net/sched/sch_netem.c b/net/sched/sch_netem.c index d876b873484..2b88295cb7b 100644 --- a/net/sched/sch_netem.c +++ b/net/sched/sch_netem.c @@ -280,6 +280,14 @@ static struct sk_buff *netem_dequeue(struct Qdisc *sch) if (unlikely(!skb)) return NULL; +#ifdef CONFIG_NET_CLS_ACT + /* + * If it's at ingress let's pretend the delay is + * from the network (tstamp will be updated). + */ + if (G_TC_FROM(skb->tc_verd) & AT_INGRESS) + skb->tstamp.tv64 = 0; +#endif pr_debug("netem_dequeue: return skb=%p\n", skb); sch->q.qlen--; return skb; -- cgit v1.2.3 From 52cf3cc8acea52ecb93ef1dddb4ef2ae4e35c319 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ilpo=20J=C3=A4rvinen?= Date: Sat, 18 Apr 2009 05:48:48 +0000 Subject: tcp: fix mid-wq adjustment helper MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Just noticed while doing some new work that the recent mid-wq adjustment logic will misbehave when FACK is not in use (happens either due sysctl'ed off or auto-detected reordering) because I forgot the relevant TCPCB tagbit. Signed-off-by: Ilpo Järvinen Signed-off-by: David S. Miller --- net/ipv4/tcp_output.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c index 53300fa2359..59aec609cec 100644 --- a/net/ipv4/tcp_output.c +++ b/net/ipv4/tcp_output.c @@ -778,7 +778,7 @@ static void tcp_adjust_pcount(struct sock *sk, struct sk_buff *skb, int decr) if (tp->lost_skb_hint && before(TCP_SKB_CB(skb)->seq, TCP_SKB_CB(tp->lost_skb_hint)->seq) && - (tcp_is_fack(tp) || TCP_SKB_CB(skb)->sacked)) + (tcp_is_fack(tp) || (TCP_SKB_CB(skb)->sacked & TCPCB_SACKED_ACKED))) tp->lost_cnt_hint -= decr; tcp_verify_left_out(tp); -- cgit v1.2.3 From eb39c57ff7782bc015da517af1d9c3b2592e721e Mon Sep 17 00:00:00 2001 From: Marcin Slusarz Date: Sun, 19 Apr 2009 07:24:24 +0000 Subject: net: fix "compatibility" typos Signed-off-by: Marcin Slusarz Signed-off-by: David S. Miller --- drivers/net/Kconfig | 4 ++-- net/core/dev.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 9e921544ba2..214a92d1ef7 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -28,9 +28,9 @@ if NETDEVICES config COMPAT_NET_DEV_OPS default y - bool "Enable older network device API compatiablity" + bool "Enable older network device API compatibility" ---help--- - This option enables kernel compatiability with older network devices + This option enables kernel compatibility with older network devices that do not use net_device_ops interface. If unsure, say Y. diff --git a/net/core/dev.c b/net/core/dev.c index dcc357e4f91..001a4c551d4 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -4405,7 +4405,7 @@ int register_netdevice(struct net_device *dev) dev->iflink = -1; #ifdef CONFIG_COMPAT_NET_DEV_OPS - /* Netdevice_ops API compatiability support. + /* Netdevice_ops API compatibility support. * This is temporary until all network devices are converted. */ if (dev->netdev_ops) { @@ -4416,7 +4416,7 @@ int register_netdevice(struct net_device *dev) dev->name, netdev_drivername(dev, drivername, 64)); /* This works only because net_device_ops and the - compatiablity structure are the same. */ + compatibility structure are the same. */ dev->netdev_ops = (void *) &(dev->init); } #endif -- cgit v1.2.3 From 5db8765a86a4cbaf45adaf8c231cf9a6ca2dcfaf Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Thu, 16 Apr 2009 08:04:20 +0000 Subject: net: Fix GRO for multiple page fragments This loop over fragments in napi_fraginfo_skb() was "interesting". Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- net/core/dev.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/core/dev.c b/net/core/dev.c index 001a4c551d4..308a7d0c277 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -2545,9 +2545,9 @@ struct sk_buff *napi_fraginfo_skb(struct napi_struct *napi, } BUG_ON(info->nr_frags > MAX_SKB_FRAGS); - frag = &info->frags[info->nr_frags - 1]; + frag = info->frags; - for (i = skb_shinfo(skb)->nr_frags; i < info->nr_frags; i++) { + for (i = 0; i < info->nr_frags; i++) { skb_fill_page_desc(skb, i, frag->page, frag->page_offset, frag->size); frag++; -- cgit v1.2.3 From 99f95f117848088f2708b45c70be73152e78bb8a Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 20 Apr 2009 18:24:57 +0900 Subject: sh: pci: Rework fixed region checks in ioremap(). Not all PCI channels have non-translatable memory windows, this is a special property of the on-chip PCIC with its 0xfd00... mapping, handle this explicitly. Signed-off-by: Paul Mundt --- arch/sh/include/asm/pci.h | 29 +++++++++++------------------ arch/sh/mm/ioremap_32.c | 14 +++++++------- 2 files changed, 18 insertions(+), 25 deletions(-) diff --git a/arch/sh/include/asm/pci.h b/arch/sh/include/asm/pci.h index 53242828977..82a9369511b 100644 --- a/arch/sh/include/asm/pci.h +++ b/arch/sh/include/asm/pci.h @@ -90,7 +90,6 @@ static inline void pcibios_penalize_isa_irq(int irq, int active) #define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0) #endif -#ifdef CONFIG_PCI static inline void pci_dma_burst_advice(struct pci_dev *pdev, enum pci_dma_burst_strategy *strat, unsigned long *strategy_parameter) @@ -99,24 +98,18 @@ static inline void pci_dma_burst_advice(struct pci_dev *pdev, *strategy_parameter = ~0UL; } -static inline int __is_pci_memory(unsigned long phys_addr, unsigned long size) -{ - struct pci_channel *p; - struct resource *res; - - for (p = board_pci_channels; p->init; p++) { - res = p->mem_resource; - if (p->enabled && (phys_addr >= res->start) && - (phys_addr + size) <= (res->end + 1)) - return 1; - } - return 0; -} +#ifdef CONFIG_SUPERH32 +/* + * If we're on an SH7751 or SH7780 PCI controller, PCI memory is mapped + * at the end of the address space in a special non-translatable area. + */ +#define PCI_MEM_FIXED_START 0xfd000000 +#define PCI_MEM_FIXED_END (PCI_MEM_FIXED_START + 0x01000000) + +#define is_pci_memory_fixed_range(s, e) \ + ((s) >= PCI_MEM_FIXED_START && (e) < PCI_MEM_FIXED_END) #else -static inline int __is_pci_memory(unsigned long phys_addr, unsigned long size) -{ - return 0; -} +#define is_pci_memory_fixed_range(s, e) (0) #endif /* Board-specific fixup routines. */ diff --git a/arch/sh/mm/ioremap_32.c b/arch/sh/mm/ioremap_32.c index 7e04cc8f3b9..da2f4186f2c 100644 --- a/arch/sh/mm/ioremap_32.c +++ b/arch/sh/mm/ioremap_32.c @@ -46,17 +46,15 @@ void __iomem *__ioremap(unsigned long phys_addr, unsigned long size, return NULL; /* - * If we're on an SH7751 or SH7780 PCI controller, PCI memory is - * mapped at the end of the address space (typically 0xfd000000) - * in a non-translatable area, so mapping through page tables for - * this area is not only pointless, but also fundamentally - * broken. Just return the physical address instead. + * If we're in the fixed PCI memory range, mapping through page + * tables is not only pointless, but also fundamentally broken. + * Just return the physical address instead. * * For boards that map a small PCI memory aperture somewhere in * P1/P2 space, ioremap() will already do the right thing, * and we'll never get this far. */ - if (__is_pci_memory(phys_addr, size)) + if (is_pci_memory_fixed_range(phys_addr, size)) return (void __iomem *)phys_addr; #if !defined(CONFIG_PMB_FIXED) @@ -121,7 +119,9 @@ void __iounmap(void __iomem *addr) unsigned long seg = PXSEG(vaddr); struct vm_struct *p; - if (seg < P3SEG || vaddr >= P3_ADDR_MAX || __is_pci_memory(vaddr, 0)) + if (seg < P3SEG || vaddr >= P3_ADDR_MAX) + return; + if (is_pci_memory_fixed_range(vaddr, 0)) return; #ifdef CONFIG_PMB -- cgit v1.2.3 From e79066a659b893debe19010179d3f3f015d76d1c Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 20 Apr 2009 18:29:22 +0900 Subject: sh: pci: New-style controller registration. This moves off of the board_pci_channels[] approach for bus registration and over to a cleaner register_pci_controller(), all derived from the MIPS code. Signed-off-by: Paul Mundt --- arch/sh/drivers/pci/pci-new.c | 97 +++++++++++++++++++++++++++++----------- arch/sh/drivers/pci/pci-sh7780.c | 87 +++++++++++++++++------------------ arch/sh/include/asm/pci.h | 29 +++++++----- 3 files changed, 130 insertions(+), 83 deletions(-) diff --git a/arch/sh/drivers/pci/pci-new.c b/arch/sh/drivers/pci/pci-new.c index c92e65045c6..78b7292c6aa 100644 --- a/arch/sh/drivers/pci/pci-new.c +++ b/arch/sh/drivers/pci/pci-new.c @@ -13,40 +13,90 @@ #include #include #include +#include -static int __init pcibios_init(void) +/* + * The PCI controller list. + */ +static struct pci_channel *hose_head, **hose_tail = &hose_head; + +static int pci_initialized; + +static void __devinit pcibios_scanbus(struct pci_channel *hose) { - struct pci_channel *p; + static int next_busno; struct pci_bus *bus; - int busno; - - /* init channels */ - busno = 0; - for (p = board_pci_channels; p->init; p++) { - if (p->init(p) == 0) - p->enabled = 1; - else - pr_err("Unable to init pci channel %d\n", busno); - busno++; + + /* Catch botched conversion attempts */ + BUG_ON(hose->init); + + bus = pci_scan_bus(next_busno, hose->pci_ops, hose); + if (bus) { + next_busno = bus->subordinate + 1; + /* Don't allow 8-bit bus number overflow inside the hose - + reserve some space for bridges. */ + if (next_busno > 224) + next_busno = 0; + + pci_bus_size_bridges(bus); + pci_bus_assign_resources(bus); + pci_enable_bridges(bus); } +} - /* scan the buses */ - busno = 0; - for (p = board_pci_channels; p->init; p++) { - if (p->enabled) { - bus = pci_scan_bus(busno, p->pci_ops, p); - busno = bus->subordinate + 1; +static DEFINE_MUTEX(pci_scan_mutex); - pci_bus_size_bridges(bus); - pci_bus_assign_resources(bus); - pci_enable_bridges(bus); - } +void __devinit register_pci_controller(struct pci_channel *hose) +{ + if (request_resource(&iomem_resource, hose->mem_resource) < 0) + goto out; + if (request_resource(&ioport_resource, hose->io_resource) < 0) { + release_resource(hose->mem_resource); + goto out; + } + + *hose_tail = hose; + hose_tail = &hose->next; + + /* + * Do not panic here but later - this might hapen before console init. + */ + if (!hose->io_map_base) { + printk(KERN_WARNING + "registering PCI controller with io_map_base unset\n"); + } + + /* + * Scan the bus if it is register after the PCI subsystem + * initialization. + */ + if (pci_initialized) { + mutex_lock(&pci_scan_mutex); + pcibios_scanbus(hose); + mutex_unlock(&pci_scan_mutex); } + return; + +out: + printk(KERN_WARNING + "Skipping PCI bus scan due to resource conflict\n"); +} + +static int __init pcibios_init(void) +{ + struct pci_channel *hose; + + /* Scan all of the recorded PCI controllers. */ + for (hose = hose_head; hose; hose = hose->next) + pcibios_scanbus(hose); + pci_fixup_irqs(pci_common_swizzle, pcibios_map_platform_irq); dma_debug_add_bus(&pci_bus_type); + pci_initialized = 1; + return 0; } subsys_initcall(pcibios_init); @@ -74,7 +124,6 @@ static void pcibios_fixup_device_resources(struct pci_dev *dev, } } - /* * Called after each bus is probed, but before its children * are examined. @@ -186,5 +235,3 @@ void __init pcibios_update_irq(struct pci_dev *dev, int irq) { pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq); } - -EXPORT_SYMBOL(board_pci_channels); diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c index f02d9dfcf25..4dd6e3b94a6 100644 --- a/arch/sh/drivers/pci/pci-sh7780.c +++ b/arch/sh/drivers/pci/pci-sh7780.c @@ -15,11 +15,47 @@ #include #include "pci-sh4.h" -static int __init sh7780_pci_init(struct pci_channel *chan) +extern u8 pci_cache_line_size; + +static struct resource sh7785_io_resource = { + .name = "SH7785_IO", + .start = SH7780_PCI_IO_BASE, + .end = SH7780_PCI_IO_BASE + SH7780_PCI_IO_SIZE - 1, + .flags = IORESOURCE_IO +}; + +static struct resource sh7785_mem_resource = { + .name = "SH7785_mem", + .start = SH7780_PCI_MEMORY_BASE, + .end = SH7780_PCI_MEMORY_BASE + SH7780_PCI_MEM_SIZE - 1, + .flags = IORESOURCE_MEM +}; + +static struct pci_channel sh7780_pci_controller = { + .pci_ops = &sh4_pci_ops, + .mem_resource = &sh7785_mem_resource, + .io_resource = &sh7785_io_resource, +}; + +static struct sh4_pci_address_map sh7780_pci_map = { + .window0 = { +#if defined(CONFIG_32BIT) + .base = SH7780_32BIT_DDR_BASE_ADDR, + .size = 0x40000000, +#else + .base = SH7780_CS0_BASE_ADDR, + .size = 0x20000000, +#endif + }, +}; + +static int __init sh7780_pci_init(void) { + struct pci_channel *chan = &sh7780_pci_controller; unsigned int id; const char *type = NULL; int ret; + u32 word; printk(KERN_NOTICE "PCI: Starting intialization.\n"); @@ -54,52 +90,6 @@ static int __init sh7780_pci_init(struct pci_channel *chan) if ((ret = sh4_pci_check_direct(chan)) != 0) return ret; - /* - * Platform specific initialization (BSC registers, and memory space - * mapping) will be called via the platform defined function - * pcibios_init_platform(). - */ - return pcibios_init_platform(); -} - -extern u8 pci_cache_line_size; - -static struct resource sh7785_io_resource = { - .name = "SH7785_IO", - .start = SH7780_PCI_IO_BASE, - .end = SH7780_PCI_IO_BASE + SH7780_PCI_IO_SIZE - 1, - .flags = IORESOURCE_IO -}; - -static struct resource sh7785_mem_resource = { - .name = "SH7785_mem", - .start = SH7780_PCI_MEMORY_BASE, - .end = SH7780_PCI_MEMORY_BASE + SH7780_PCI_MEM_SIZE - 1, - .flags = IORESOURCE_MEM -}; - -struct pci_channel board_pci_channels[] = { - { sh7780_pci_init, &sh4_pci_ops, &sh7785_io_resource, &sh7785_mem_resource, 0, 0xff }, - { NULL, NULL, NULL, 0, 0 }, -}; - -static struct sh4_pci_address_map sh7780_pci_map = { - .window0 = { -#if defined(CONFIG_32BIT) - .base = SH7780_32BIT_DDR_BASE_ADDR, - .size = 0x40000000, -#else - .base = SH7780_CS0_BASE_ADDR, - .size = 0x20000000, -#endif - }, -}; - -int __init pcibios_init_platform(void) -{ - struct pci_channel *chan = &board_pci_channels[0]; - u32 word; - /* * Set the class and sub-class codes. */ @@ -153,5 +143,8 @@ int __init pcibios_init_platform(void) __set_io_port_base(SH7780_PCI_IO_BASE); + register_pci_controller(chan); + return 0; } +arch_initcall(sh7780_pci_init); diff --git a/arch/sh/include/asm/pci.h b/arch/sh/include/asm/pci.h index 82a9369511b..e057ebdb461 100644 --- a/arch/sh/include/asm/pci.h +++ b/arch/sh/include/asm/pci.h @@ -17,17 +17,22 @@ * external) PCI controllers. */ struct pci_channel { - int (*init)(struct pci_channel *chan); - struct pci_ops *pci_ops; - struct resource *io_resource; - struct resource *mem_resource; - int first_devfn; - int last_devfn; - int enabled; - unsigned long reg_base; - unsigned long io_base; - - unsigned long io_map_base; + struct pci_channel *next; + + int (*init)(struct pci_channel *chan); + + struct pci_ops *pci_ops; + struct resource *io_resource; + struct resource *mem_resource; + + int first_devfn; + int last_devfn; + int enabled; + + unsigned long reg_base; + unsigned long io_base; + + unsigned long io_map_base; }; /* @@ -35,6 +40,8 @@ struct pci_channel { */ extern struct pci_channel board_pci_channels[]; +extern void register_pci_controller(struct pci_channel *hose); + extern unsigned long PCIBIOS_MIN_IO, PCIBIOS_MIN_MEM; struct pci_dev; -- cgit v1.2.3 From 09cfeb133e3cac39b8b9a2cb1d8ab4f77e396248 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 20 Apr 2009 18:42:00 +0900 Subject: sh: pci: Track io and mem_offset per-channel. This implements a per-hose offset for I/O and mem resources. Signed-off-by: Paul Mundt --- arch/sh/drivers/pci/pci-new.c | 18 +++++++++--------- arch/sh/drivers/pci/pci-sh7780.c | 2 ++ arch/sh/include/asm/pci.h | 3 +++ 3 files changed, 14 insertions(+), 9 deletions(-) diff --git a/arch/sh/drivers/pci/pci-new.c b/arch/sh/drivers/pci/pci-new.c index 78b7292c6aa..e8ac8daafc3 100644 --- a/arch/sh/drivers/pci/pci-new.c +++ b/arch/sh/drivers/pci/pci-new.c @@ -105,7 +105,7 @@ static void pcibios_fixup_device_resources(struct pci_dev *dev, struct pci_bus *bus) { /* Update device resources. */ - struct pci_channel *chan = bus->sysdata; + struct pci_channel *hose = bus->sysdata; unsigned long offset = 0; int i; @@ -115,9 +115,9 @@ static void pcibios_fixup_device_resources(struct pci_dev *dev, if (dev->resource[i].flags & IORESOURCE_PCI_FIXED) continue; if (dev->resource[i].flags & IORESOURCE_IO) - offset = chan->io_base; + offset = hose->io_offset; else if (dev->resource[i].flags & IORESOURCE_MEM) - offset = 0; + offset = hose->mem_offset; dev->resource[i].start += offset; dev->resource[i].end += offset; @@ -150,13 +150,13 @@ void __devinit __weak pcibios_fixup_bus(struct pci_bus *bus) void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, struct resource *res) { - struct pci_channel *chan = dev->sysdata; + struct pci_channel *hose = dev->sysdata; unsigned long offset = 0; if (res->flags & IORESOURCE_IO) - offset = chan->io_base; + offset = hose->io_offset; else if (res->flags & IORESOURCE_MEM) - offset = 0; + offset = hose->mem_offset; region->start = res->start - offset; region->end = res->end - offset; @@ -166,13 +166,13 @@ void __devinit pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, struct pci_bus_region *region) { - struct pci_channel *chan = dev->sysdata; + struct pci_channel *hose = dev->sysdata; unsigned long offset = 0; if (res->flags & IORESOURCE_IO) - offset = chan->io_base; + offset = hose->io_offset; else if (res->flags & IORESOURCE_MEM) - offset = 0; + offset = hose->mem_offset; res->start = region->start + offset; res->end = region->end + offset; diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c index 4dd6e3b94a6..57a3b870a27 100644 --- a/arch/sh/drivers/pci/pci-sh7780.c +++ b/arch/sh/drivers/pci/pci-sh7780.c @@ -34,7 +34,9 @@ static struct resource sh7785_mem_resource = { static struct pci_channel sh7780_pci_controller = { .pci_ops = &sh4_pci_ops, .mem_resource = &sh7785_mem_resource, + .mem_offset = 0x00000000, .io_resource = &sh7785_io_resource, + .io_offset = 0x00000000, }; static struct sh4_pci_address_map sh7780_pci_map = { diff --git a/arch/sh/include/asm/pci.h b/arch/sh/include/asm/pci.h index e057ebdb461..0be20521a1f 100644 --- a/arch/sh/include/asm/pci.h +++ b/arch/sh/include/asm/pci.h @@ -25,6 +25,9 @@ struct pci_channel { struct resource *io_resource; struct resource *mem_resource; + unsigned long io_offset; + unsigned long mem_offset; + int first_devfn; int last_devfn; int enabled; -- cgit v1.2.3 From 5160d3f782a5e0cdb3bdaa8a891a1fb9d9ab83ec Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 20 Apr 2009 18:47:21 +0900 Subject: sh: pci: Consolidate bus<->resource mapping in pci-lib. Now that the io and mem offsets are tracked accordingly, the pci-new version of the bus<->resource mappers can be used generically. This moves them in to pci-lib. Signed-off-by: Paul Mundt --- arch/sh/drivers/pci/pci-lib.c | 31 +++++++++++++++++++++++++++++++ arch/sh/drivers/pci/pci-new.c | 31 ------------------------------- arch/sh/drivers/pci/pci.c | 14 -------------- 3 files changed, 31 insertions(+), 45 deletions(-) diff --git a/arch/sh/drivers/pci/pci-lib.c b/arch/sh/drivers/pci/pci-lib.c index 654ffcc67d0..9fd3af9db46 100644 --- a/arch/sh/drivers/pci/pci-lib.c +++ b/arch/sh/drivers/pci/pci-lib.c @@ -39,6 +39,37 @@ void pcibios_align_resource(void *data, struct resource *res, res->start = start; } +void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, + struct resource *res) +{ + struct pci_channel *hose = dev->sysdata; + unsigned long offset = 0; + + if (res->flags & IORESOURCE_IO) + offset = hose->io_offset; + else if (res->flags & IORESOURCE_MEM) + offset = hose->mem_offset; + + region->start = res->start - offset; + region->end = res->end - offset; +} + +void __devinit +pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, + struct pci_bus_region *region) +{ + struct pci_channel *hose = dev->sysdata; + unsigned long offset = 0; + + if (res->flags & IORESOURCE_IO) + offset = hose->io_offset; + else if (res->flags & IORESOURCE_MEM) + offset = hose->mem_offset; + + res->start = region->start + offset; + res->end = region->end + offset; +} + int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, enum pci_mmap_state mmap_state, int write_combine) { diff --git a/arch/sh/drivers/pci/pci-new.c b/arch/sh/drivers/pci/pci-new.c index e8ac8daafc3..9d426147802 100644 --- a/arch/sh/drivers/pci/pci-new.c +++ b/arch/sh/drivers/pci/pci-new.c @@ -147,37 +147,6 @@ void __devinit __weak pcibios_fixup_bus(struct pci_bus *bus) } } -void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, - struct resource *res) -{ - struct pci_channel *hose = dev->sysdata; - unsigned long offset = 0; - - if (res->flags & IORESOURCE_IO) - offset = hose->io_offset; - else if (res->flags & IORESOURCE_MEM) - offset = hose->mem_offset; - - region->start = res->start - offset; - region->end = res->end - offset; -} - -void __devinit -pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, - struct pci_bus_region *region) -{ - struct pci_channel *hose = dev->sysdata; - unsigned long offset = 0; - - if (res->flags & IORESOURCE_IO) - offset = hose->io_offset; - else if (res->flags & IORESOURCE_MEM) - offset = hose->mem_offset; - - res->start = region->start + offset; - res->end = region->end + offset; -} - int pcibios_enable_device(struct pci_dev *dev, int mask) { u16 cmd, old_cmd; diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c index d39f24091ad..c15a6f0ad50 100644 --- a/arch/sh/drivers/pci/pci.c +++ b/arch/sh/drivers/pci/pci.c @@ -72,20 +72,6 @@ void __devinit __weak pcibios_fixup_bus(struct pci_bus *bus) pci_read_bridge_bases(bus); } -void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, - struct resource *res) -{ - region->start = res->start; - region->end = res->end; -} - -void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, - struct pci_bus_region *region) -{ - res->start = region->start; - res->end = region->end; -} - int pcibios_enable_device(struct pci_dev *dev, int mask) { u16 cmd, old_cmd; -- cgit v1.2.3 From 3f8daeacd7ed7a502daf0998e2515cea4f467f21 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 20 Apr 2009 18:53:41 +0900 Subject: sh: pci: Consolidate the remaining common bits. This moves the remaining common bits in to pci-lib. Thereby reducing pci.c/pci-new.c to simple bus fixups and controller registration. As more platforms are moved over, the old code will disappear completely and the pci-new bits will be rolled in to pci-lib, eventually replacing pci.c completely. Signed-off-by: Paul Mundt --- arch/sh/drivers/pci/pci-lib.c | 64 +++++++++++++++++++++++++++++++++++++++++++ arch/sh/drivers/pci/pci-new.c | 58 --------------------------------------- arch/sh/drivers/pci/pci.c | 58 --------------------------------------- 3 files changed, 64 insertions(+), 116 deletions(-) diff --git a/arch/sh/drivers/pci/pci-lib.c b/arch/sh/drivers/pci/pci-lib.c index 9fd3af9db46..ea836294584 100644 --- a/arch/sh/drivers/pci/pci-lib.c +++ b/arch/sh/drivers/pci/pci-lib.c @@ -70,6 +70,70 @@ pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, res->end = region->end + offset; } +int pcibios_enable_device(struct pci_dev *dev, int mask) +{ + u16 cmd, old_cmd; + int idx; + struct resource *r; + + pci_read_config_word(dev, PCI_COMMAND, &cmd); + old_cmd = cmd; + for (idx=0; idx < PCI_NUM_RESOURCES; idx++) { + /* Only set up the requested stuff */ + if (!(mask & (1<resource[idx]; + if (!(r->flags & (IORESOURCE_IO | IORESOURCE_MEM))) + continue; + if ((idx == PCI_ROM_RESOURCE) && + (!(r->flags & IORESOURCE_ROM_ENABLE))) + continue; + if (!r->start && r->end) { + printk(KERN_ERR "PCI: Device %s not available " + "because of resource collisions\n", + pci_name(dev)); + return -EINVAL; + } + if (r->flags & IORESOURCE_IO) + cmd |= PCI_COMMAND_IO; + if (r->flags & IORESOURCE_MEM) + cmd |= PCI_COMMAND_MEMORY; + } + if (cmd != old_cmd) { + printk("PCI: Enabling device %s (%04x -> %04x)\n", + pci_name(dev), old_cmd, cmd); + pci_write_config_word(dev, PCI_COMMAND, cmd); + } + return 0; +} + +/* + * If we set up a device for bus mastering, we need to check and set + * the latency timer as it may not be properly set. + */ +static unsigned int pcibios_max_latency = 255; + +void pcibios_set_master(struct pci_dev *dev) +{ + u8 lat; + pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat); + if (lat < 16) + lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency; + else if (lat > pcibios_max_latency) + lat = pcibios_max_latency; + else + return; + printk(KERN_INFO "PCI: Setting latency timer of device %s to %d\n", + pci_name(dev), lat); + pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat); +} + +void __init pcibios_update_irq(struct pci_dev *dev, int irq) +{ + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq); +} + int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, enum pci_mmap_state mmap_state, int write_combine) { diff --git a/arch/sh/drivers/pci/pci-new.c b/arch/sh/drivers/pci/pci-new.c index 9d426147802..8c0b136eecb 100644 --- a/arch/sh/drivers/pci/pci-new.c +++ b/arch/sh/drivers/pci/pci-new.c @@ -146,61 +146,3 @@ void __devinit __weak pcibios_fixup_bus(struct pci_bus *bus) pcibios_fixup_device_resources(dev, bus); } } - -int pcibios_enable_device(struct pci_dev *dev, int mask) -{ - u16 cmd, old_cmd; - int idx; - struct resource *r; - - pci_read_config_word(dev, PCI_COMMAND, &cmd); - old_cmd = cmd; - for(idx=0; idx<6; idx++) { - if (!(mask & (1 << idx))) - continue; - r = &dev->resource[idx]; - if (!r->start && r->end) { - printk(KERN_ERR "PCI: Device %s not available because " - "of resource collisions\n", pci_name(dev)); - return -EINVAL; - } - if (r->flags & IORESOURCE_IO) - cmd |= PCI_COMMAND_IO; - if (r->flags & IORESOURCE_MEM) - cmd |= PCI_COMMAND_MEMORY; - } - if (dev->resource[PCI_ROM_RESOURCE].start) - cmd |= PCI_COMMAND_MEMORY; - if (cmd != old_cmd) { - printk(KERN_INFO "PCI: Enabling device %s (%04x -> %04x)\n", - pci_name(dev), old_cmd, cmd); - pci_write_config_word(dev, PCI_COMMAND, cmd); - } - return 0; -} - -/* - * If we set up a device for bus mastering, we need to check and set - * the latency timer as it may not be properly set. - */ -static unsigned int pcibios_max_latency = 255; - -void pcibios_set_master(struct pci_dev *dev) -{ - u8 lat; - pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat); - if (lat < 16) - lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency; - else if (lat > pcibios_max_latency) - lat = pcibios_max_latency; - else - return; - printk(KERN_INFO "PCI: Setting latency timer of device %s to %d\n", - pci_name(dev), lat); - pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat); -} - -void __init pcibios_update_irq(struct pci_dev *dev, int irq) -{ - pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq); -} diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c index c15a6f0ad50..8c332b2a464 100644 --- a/arch/sh/drivers/pci/pci.c +++ b/arch/sh/drivers/pci/pci.c @@ -72,62 +72,4 @@ void __devinit __weak pcibios_fixup_bus(struct pci_bus *bus) pci_read_bridge_bases(bus); } -int pcibios_enable_device(struct pci_dev *dev, int mask) -{ - u16 cmd, old_cmd; - int idx; - struct resource *r; - - pci_read_config_word(dev, PCI_COMMAND, &cmd); - old_cmd = cmd; - for(idx=0; idx<6; idx++) { - if (!(mask & (1 << idx))) - continue; - r = &dev->resource[idx]; - if (!r->start && r->end) { - printk(KERN_ERR "PCI: Device %s not available because " - "of resource collisions\n", pci_name(dev)); - return -EINVAL; - } - if (r->flags & IORESOURCE_IO) - cmd |= PCI_COMMAND_IO; - if (r->flags & IORESOURCE_MEM) - cmd |= PCI_COMMAND_MEMORY; - } - if (dev->resource[PCI_ROM_RESOURCE].start) - cmd |= PCI_COMMAND_MEMORY; - if (cmd != old_cmd) { - printk(KERN_INFO "PCI: Enabling device %s (%04x -> %04x)\n", - pci_name(dev), old_cmd, cmd); - pci_write_config_word(dev, PCI_COMMAND, cmd); - } - return 0; -} - -/* - * If we set up a device for bus mastering, we need to check and set - * the latency timer as it may not be properly set. - */ -static unsigned int pcibios_max_latency = 255; - -void pcibios_set_master(struct pci_dev *dev) -{ - u8 lat; - pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat); - if (lat < 16) - lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency; - else if (lat > pcibios_max_latency) - lat = pcibios_max_latency; - else - return; - printk(KERN_INFO "PCI: Setting latency timer of device %s to %d\n", - pci_name(dev), lat); - pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat); -} - -void __init pcibios_update_irq(struct pci_dev *dev, int irq) -{ - pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq); -} - EXPORT_SYMBOL(board_pci_channels); -- cgit v1.2.3 From 5ba7205fc49ff72e88784c94fb661f93e7ae7d36 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 20 Apr 2009 19:00:32 +0900 Subject: sh: pci: Kill off the now unused hose->io_base. Nothing is using this any more, so kill it off. Signed-off-by: Paul Mundt --- arch/sh/drivers/pci/pci-sh7751.c | 8 -------- arch/sh/drivers/pci/pci-sh7780.c | 1 - arch/sh/include/asm/pci.h | 1 - 3 files changed, 10 deletions(-) diff --git a/arch/sh/drivers/pci/pci-sh7751.c b/arch/sh/drivers/pci/pci-sh7751.c index af8874436d2..4c08fd7f665 100644 --- a/arch/sh/drivers/pci/pci-sh7751.c +++ b/arch/sh/drivers/pci/pci-sh7751.c @@ -40,7 +40,6 @@ int __init sh7751_pci_init(struct pci_channel *chan) pr_debug("PCI: Starting intialization.\n"); chan->reg_base = 0xfe200000; - chan->io_base = 0xfe240000; /* check for SH7751/SH7751R hardware */ id = pci_read_reg(chan, SH7751_PCICONF0); @@ -136,13 +135,6 @@ int __init sh7751_pcic_init(struct pci_channel *chan, pr_debug("PCI: Setting upper bits of Memory window to 0x%x\n", word); pci_write_reg(chan, word , SH4_PCIMBR); - /* Map IO space into PCI IO window: - * IO addresses will be translated to the PCI IO window base address - */ - pr_debug("PCI: Mapping IO address 0x%x - 0x%x to base 0x%lx\n", - chan->io_resource->start, chan->io_resource->end, - chan->io_base + chan->io_resource->start); - /* Make sure the MSB's of IO window are set to access PCI space * correctly */ word = chan->io_resource->start & SH4_PCIIOBR_MASK; diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c index 57a3b870a27..ae13ff925c6 100644 --- a/arch/sh/drivers/pci/pci-sh7780.c +++ b/arch/sh/drivers/pci/pci-sh7780.c @@ -62,7 +62,6 @@ static int __init sh7780_pci_init(void) printk(KERN_NOTICE "PCI: Starting intialization.\n"); chan->reg_base = 0xfe040000; - chan->io_base = 0xfe200000; /* Enable CPU access to the PCIC registers. */ __raw_writel(PCIECR_ENBL, PCIECR); diff --git a/arch/sh/include/asm/pci.h b/arch/sh/include/asm/pci.h index 0be20521a1f..f36c7899295 100644 --- a/arch/sh/include/asm/pci.h +++ b/arch/sh/include/asm/pci.h @@ -33,7 +33,6 @@ struct pci_channel { int enabled; unsigned long reg_base; - unsigned long io_base; unsigned long io_map_base; }; -- cgit v1.2.3 From 9c3fea6ab04a7bd9298e635bf29b4a5379f6c476 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Sat, 18 Apr 2009 14:15:52 +0000 Subject: tun: Only free a netdev when all tun descriptors are closed The commit c70f182940f988448f3c12a209d18b1edc276e33 ("tun: Fix races between tun_net_close and free_netdev") fixed a race where an asynchronous deletion of a tun device can hose a poll(2) on a tun fd attached to that device. However, this came at the cost of moving the tun wait queue into the tun file data structure. The problem with this is that it imposes restrictions on when and where the tun device can access the wait queue since the tun file may change at any time due to detaching and reattaching. In particular, now that we need to use the wait queue on the receive path it becomes difficult to properly synchronise this with the detachment of the tun device. This patch solves the original race in a different way. Since the race is only because the underlying memory gets freed, we can prevent it simply by ensuring that we don't do that until all tun descriptors ever attached to the device (even if they have since be detached because they may still be sitting in poll) have been closed. This is done by using reference counting the attached tun file descriptors. The refcount in tun->sk has been reappropriated for this purpose since it was already being used for that, albeit from the opposite angle. Note that we no longer zero tfile->tun since tun_get will return NULL anyway after the refcount on tfile hits zero. Instead it represents whether this device has ever been attached to a device. Signed-off-by: Herbert Xu Signed-off-by: David S. Miller --- drivers/net/tun.c | 32 +++++++++++++++++++------------- 1 file changed, 19 insertions(+), 13 deletions(-) diff --git a/drivers/net/tun.c b/drivers/net/tun.c index 16716aef184..95ae40ab871 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -156,6 +156,7 @@ static int tun_attach(struct tun_struct *tun, struct file *file) tfile->tun = tun; tun->tfile = tfile; dev_hold(tun->dev); + sock_hold(tun->sk); atomic_inc(&tfile->count); out: @@ -165,11 +166,8 @@ out: static void __tun_detach(struct tun_struct *tun) { - struct tun_file *tfile = tun->tfile; - /* Detach from net device */ netif_tx_lock_bh(tun->dev); - tfile->tun = NULL; tun->tfile = NULL; netif_tx_unlock_bh(tun->dev); @@ -339,6 +337,13 @@ static void tun_net_uninit(struct net_device *dev) } } +static void tun_free_netdev(struct net_device *dev) +{ + struct tun_struct *tun = netdev_priv(dev); + + sock_put(tun->sk); +} + /* Net device open. */ static int tun_net_open(struct net_device *dev) { @@ -811,7 +816,7 @@ static void tun_setup(struct net_device *dev) tun->group = -1; dev->ethtool_ops = &tun_ethtool_ops; - dev->destructor = free_netdev; + dev->destructor = tun_free_netdev; } /* Trivial set of netlink ops to allow deleting tun or tap @@ -848,7 +853,7 @@ static void tun_sock_write_space(struct sock *sk) static void tun_sock_destruct(struct sock *sk) { - dev_put(container_of(sk, struct tun_sock, sk)->tun->dev); + free_netdev(container_of(sk, struct tun_sock, sk)->tun->dev); } static struct proto tun_proto = { @@ -920,11 +925,8 @@ static int tun_set_iff(struct net *net, struct file *file, struct ifreq *ifr) if (!sk) goto err_free_dev; - /* This ref count is for tun->sk. */ - dev_hold(dev); sock_init_data(&tun->socket, sk); sk->sk_write_space = tun_sock_write_space; - sk->sk_destruct = tun_sock_destruct; sk->sk_sndbuf = INT_MAX; sk->sk_sleep = &tfile->read_wait; @@ -942,11 +944,13 @@ static int tun_set_iff(struct net *net, struct file *file, struct ifreq *ifr) err = -EINVAL; err = register_netdevice(tun->dev); if (err < 0) - goto err_free_dev; + goto err_free_sk; + + sk->sk_destruct = tun_sock_destruct; err = tun_attach(tun, file); if (err < 0) - goto err_free_dev; + goto failed; } DBG(KERN_INFO "%s: tun_set_iff\n", tun->dev->name); @@ -1284,14 +1288,16 @@ static int tun_chr_close(struct inode *inode, struct file *file) __tun_detach(tun); /* If desireable, unregister the netdevice. */ - if (!(tun->flags & TUN_PERSIST)) { - sock_put(tun->sk); + if (!(tun->flags & TUN_PERSIST)) unregister_netdevice(tun->dev); - } rtnl_unlock(); } + tun = tfile->tun; + if (tun) + sock_put(tun->sk); + put_net(tfile->net); kfree(tfile); -- cgit v1.2.3 From c40af84a6726f63e35740d26f841992e8f31f92c Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Sun, 19 Apr 2009 22:35:50 +0000 Subject: tun: Fix sk_sleep races when attaching/detaching As the sk_sleep wait queue actually lives in tfile, which may be detached from the tun device, bad things will happen when we use sk_sleep after detaching. Since the tun device is the persistent data structure here (when requested by the user), it makes much more sense to have the wait queue live there. There is no reason to have it in tfile at all since the only time we can wait is if we have a tun attached. In fact we already have a wait queue in tun_struct, so we might as well use it. Reported-by: Eric W. Biederman Tested-by: Christian Borntraeger Tested-by: Patrick McHardy Signed-off-by: Herbert Xu Signed-off-by: David S. Miller --- drivers/net/tun.c | 15 ++++++--------- 1 file changed, 6 insertions(+), 9 deletions(-) diff --git a/drivers/net/tun.c b/drivers/net/tun.c index 95ae40ab871..735bf41c654 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -93,7 +93,6 @@ struct tun_file { atomic_t count; struct tun_struct *tun; struct net *net; - wait_queue_head_t read_wait; }; struct tun_sock; @@ -331,7 +330,7 @@ static void tun_net_uninit(struct net_device *dev) /* Inform the methods they need to stop using the dev. */ if (tfile) { - wake_up_all(&tfile->read_wait); + wake_up_all(&tun->socket.wait); if (atomic_dec_and_test(&tfile->count)) __tun_detach(tun); } @@ -398,7 +397,7 @@ static int tun_net_xmit(struct sk_buff *skb, struct net_device *dev) /* Notify and wake up reader process */ if (tun->flags & TUN_FASYNC) kill_fasync(&tun->fasync, SIGIO, POLL_IN); - wake_up_interruptible(&tun->tfile->read_wait); + wake_up_interruptible(&tun->socket.wait); return 0; drop: @@ -495,7 +494,7 @@ static unsigned int tun_chr_poll(struct file *file, poll_table * wait) DBG(KERN_INFO "%s: tun_chr_poll\n", tun->dev->name); - poll_wait(file, &tfile->read_wait, wait); + poll_wait(file, &tun->socket.wait, wait); if (!skb_queue_empty(&tun->readq)) mask |= POLLIN | POLLRDNORM; @@ -768,7 +767,7 @@ static ssize_t tun_chr_aio_read(struct kiocb *iocb, const struct iovec *iv, goto out; } - add_wait_queue(&tfile->read_wait, &wait); + add_wait_queue(&tun->socket.wait, &wait); while (len) { current->state = TASK_INTERRUPTIBLE; @@ -799,7 +798,7 @@ static ssize_t tun_chr_aio_read(struct kiocb *iocb, const struct iovec *iv, } current->state = TASK_RUNNING; - remove_wait_queue(&tfile->read_wait, &wait); + remove_wait_queue(&tun->socket.wait, &wait); out: tun_put(tun); @@ -867,7 +866,6 @@ static int tun_set_iff(struct net *net, struct file *file, struct ifreq *ifr) struct sock *sk; struct tun_struct *tun; struct net_device *dev; - struct tun_file *tfile = file->private_data; int err; dev = __dev_get_by_name(net, ifr->ifr_name); @@ -925,10 +923,10 @@ static int tun_set_iff(struct net *net, struct file *file, struct ifreq *ifr) if (!sk) goto err_free_dev; + init_waitqueue_head(&tun->socket.wait); sock_init_data(&tun->socket, sk); sk->sk_write_space = tun_sock_write_space; sk->sk_sndbuf = INT_MAX; - sk->sk_sleep = &tfile->read_wait; tun->sk = sk; container_of(sk, struct tun_sock, sk)->tun = tun; @@ -1270,7 +1268,6 @@ static int tun_chr_open(struct inode *inode, struct file * file) atomic_set(&tfile->count, 0); tfile->tun = NULL; tfile->net = get_net(current->nsproxy->net_ns); - init_waitqueue_head(&tfile->read_wait); file->private_data = tfile; return 0; } -- cgit v1.2.3 From bb3396477bf46c7cae6bd04b969580277957966e Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 20 Apr 2009 19:26:45 +0900 Subject: sh: pci: Kill off superfluous lboxre2 pci fixups. This is a verbatim copy of the r2d one, use that instead. Signed-off-by: Paul Mundt --- arch/sh/drivers/pci/Makefile | 2 +- arch/sh/drivers/pci/fixups-lboxre2.c | 42 ------------------------------------ 2 files changed, 1 insertion(+), 43 deletions(-) delete mode 100644 arch/sh/drivers/pci/fixups-lboxre2.c diff --git a/arch/sh/drivers/pci/Makefile b/arch/sh/drivers/pci/Makefile index c8eab14843e..4cac866d55d 100644 --- a/arch/sh/drivers/pci/Makefile +++ b/arch/sh/drivers/pci/Makefile @@ -22,5 +22,5 @@ obj-$(CONFIG_SH_SDK7780) += fixups-sdk7780.o obj-$(CONFIG_SH_7780_SOLUTION_ENGINE) += fixups-sdk7780.o obj-$(CONFIG_SH_TITAN) += ops-titan.o obj-$(CONFIG_SH_LANDISK) += ops-landisk.o -obj-$(CONFIG_SH_LBOX_RE2) += ops-lboxre2.o fixups-lboxre2.o +obj-$(CONFIG_SH_LBOX_RE2) += ops-lboxre2.o fixups-rts7751r2d.o obj-$(CONFIG_SH_CAYMAN) += ops-cayman.o diff --git a/arch/sh/drivers/pci/fixups-lboxre2.c b/arch/sh/drivers/pci/fixups-lboxre2.c deleted file mode 100644 index a82011d03cb..00000000000 --- a/arch/sh/drivers/pci/fixups-lboxre2.c +++ /dev/null @@ -1,42 +0,0 @@ -/* - * arch/sh/drivers/pci/fixups-lboxre2.c - * - * L-BOX RE2 PCI fixups - * - * Copyright (C) 2007 Nobuhiro Iwamatsu - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include -#include "pci-sh4.h" - -#define PCIMCR_MRSET_OFF 0xBFFFFFFF -#define PCIMCR_RFSH_OFF 0xFFFFFFFB - -int pci_fixup_pcic(struct pci_channel *chan) -{ - unsigned long bcr1, mcr; - - bcr1 = ctrl_inl(SH7751_BCR1); - bcr1 |= 0x40080000; /* Enable Bit 19 BREQEN, set PCIC to slave */ - pci_write_reg(chan, bcr1, SH4_PCIBCR1); - - /* Enable all interrupts, so we known what to fix */ - pci_write_reg(chan, 0x0000c3ff, SH4_PCIINTM); - pci_write_reg(chan, 0x0000380f, SH4_PCIAINTM); - pci_write_reg(chan, 0xfb900047, SH7751_PCICONF1); - pci_write_reg(chan, 0xab000001, SH7751_PCICONF4); - - mcr = ctrl_inl(SH7751_MCR); - mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF; - pci_write_reg(chan, mcr, SH4_PCIMCR); - - pci_write_reg(chan, 0x0c000000, SH7751_PCICONF5); - pci_write_reg(chan, 0xd0000000, SH7751_PCICONF6); - pci_write_reg(chan, 0x0c000000, SH4_PCILAR0); - pci_write_reg(chan, 0x00000000, SH4_PCILAR1); - - return 0; -} -- cgit v1.2.3 From d556fcc101c4b0d57ac9742ab806a6bfed78eac1 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 20 Apr 2009 19:31:20 +0900 Subject: sh: pci: Flag the dreamcast BBA as IORESOURCE_PCI_FIXED. This isn't a real BAR, so prevent any attempts to move it, as we don't wish to encourage a bus luck by overzealous PCI initialization code. Signed-off-by: Paul Mundt --- arch/sh/drivers/pci/fixups-dreamcast.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/sh/drivers/pci/fixups-dreamcast.c b/arch/sh/drivers/pci/fixups-dreamcast.c index 2bf85cf091e..48c6381fffa 100644 --- a/arch/sh/drivers/pci/fixups-dreamcast.c +++ b/arch/sh/drivers/pci/fixups-dreamcast.c @@ -41,6 +41,13 @@ static void __init gapspci_fixup_resources(struct pci_dev *dev) */ dev->resource[1].start = p->io_resource->start + 0x100; dev->resource[1].end = dev->resource[1].start + 0x200 - 1; + + /* + * This is not a normal BAR, prevent any attempts to move + * the BAR, as this will result in a bus lock. + */ + dev->resource[1].flags |= IORESOURCE_PCI_FIXED; + /* * Redirect dma memory allocations to special memory window. */ -- cgit v1.2.3 From c563bf0965c86cc6087b09c34ca063fe96d6deca Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 20 Apr 2009 19:39:57 +0900 Subject: sh: pci: Kill off dead references to is_pci_ioaddr and friends. Some old boards are still using this in their I/O routines, kill it off. Signed-off-by: Paul Mundt --- arch/sh/boards/mach-se/7751/io.c | 16 ---------------- arch/sh/boards/mach-snapgear/io.c | 16 ---------------- arch/sh/boards/mach-systemh/io.c | 16 ---------------- arch/sh/boards/mach-titan/io.c | 18 ------------------ 4 files changed, 66 deletions(-) diff --git a/arch/sh/boards/mach-se/7751/io.c b/arch/sh/boards/mach-se/7751/io.c index 6287ae57031..6e75bd4459e 100644 --- a/arch/sh/boards/mach-se/7751/io.c +++ b/arch/sh/boards/mach-se/7751/io.c @@ -34,8 +34,6 @@ unsigned char sh7751se_inb(unsigned long port) { if (PXSEG(port)) return *(volatile unsigned char *)port; - else if (is_pci_ioaddr(port)) - return *(volatile unsigned char *)pci_ioaddr(port); else return (*port2adr(port)) & 0xff; } @@ -46,8 +44,6 @@ unsigned char sh7751se_inb_p(unsigned long port) if (PXSEG(port)) v = *(volatile unsigned char *)port; - else if (is_pci_ioaddr(port)) - v = *(volatile unsigned char *)pci_ioaddr(port); else v = (*port2adr(port)) & 0xff; ctrl_delay(); @@ -58,8 +54,6 @@ unsigned short sh7751se_inw(unsigned long port) { if (PXSEG(port)) return *(volatile unsigned short *)port; - else if (is_pci_ioaddr(port)) - return *(volatile unsigned short *)pci_ioaddr(port); else if (port >= 0x2000) return *port2adr(port); else @@ -71,8 +65,6 @@ unsigned int sh7751se_inl(unsigned long port) { if (PXSEG(port)) return *(volatile unsigned long *)port; - else if (is_pci_ioaddr(port)) - return *(volatile unsigned int *)pci_ioaddr(port); else if (port >= 0x2000) return *port2adr(port); else @@ -85,8 +77,6 @@ void sh7751se_outb(unsigned char value, unsigned long port) if (PXSEG(port)) *(volatile unsigned char *)port = value; - else if (is_pci_ioaddr(port)) - *((unsigned char*)pci_ioaddr(port)) = value; else *(port2adr(port)) = value; } @@ -95,8 +85,6 @@ void sh7751se_outb_p(unsigned char value, unsigned long port) { if (PXSEG(port)) *(volatile unsigned char *)port = value; - else if (is_pci_ioaddr(port)) - *((unsigned char*)pci_ioaddr(port)) = value; else *(port2adr(port)) = value; ctrl_delay(); @@ -106,8 +94,6 @@ void sh7751se_outw(unsigned short value, unsigned long port) { if (PXSEG(port)) *(volatile unsigned short *)port = value; - else if (is_pci_ioaddr(port)) - *((unsigned short *)pci_ioaddr(port)) = value; else if (port >= 0x2000) *port2adr(port) = value; else @@ -118,8 +104,6 @@ void sh7751se_outl(unsigned int value, unsigned long port) { if (PXSEG(port)) *(volatile unsigned long *)port = value; - else if (is_pci_ioaddr(port)) - *((unsigned long*)pci_ioaddr(port)) = value; else maybebadio(port); } diff --git a/arch/sh/boards/mach-snapgear/io.c b/arch/sh/boards/mach-snapgear/io.c index 0f482426455..476650e42db 100644 --- a/arch/sh/boards/mach-snapgear/io.c +++ b/arch/sh/boards/mach-snapgear/io.c @@ -36,8 +36,6 @@ unsigned char snapgear_inb(unsigned long port) { if (PXSEG(port)) return *(volatile unsigned char *)port; - else if (is_pci_ioaddr(port)) - return *(volatile unsigned char *)pci_ioaddr(port); else return (*port2adr(port)) & 0xff; } @@ -48,8 +46,6 @@ unsigned char snapgear_inb_p(unsigned long port) if (PXSEG(port)) v = *(volatile unsigned char *)port; - else if (is_pci_ioaddr(port)) - v = *(volatile unsigned char *)pci_ioaddr(port); else v = (*port2adr(port))&0xff; ctrl_delay(); @@ -60,8 +56,6 @@ unsigned short snapgear_inw(unsigned long port) { if (PXSEG(port)) return *(volatile unsigned short *)port; - else if (is_pci_ioaddr(port)) - return *(volatile unsigned short *)pci_ioaddr(port); else if (port >= 0x2000) return *port2adr(port); else @@ -73,8 +67,6 @@ unsigned int snapgear_inl(unsigned long port) { if (PXSEG(port)) return *(volatile unsigned long *)port; - else if (is_pci_ioaddr(port)) - return *(volatile unsigned int *)pci_ioaddr(port); else if (port >= 0x2000) return *port2adr(port); else @@ -87,8 +79,6 @@ void snapgear_outb(unsigned char value, unsigned long port) if (PXSEG(port)) *(volatile unsigned char *)port = value; - else if (is_pci_ioaddr(port)) - *((unsigned char*)pci_ioaddr(port)) = value; else *(port2adr(port)) = value; } @@ -97,8 +87,6 @@ void snapgear_outb_p(unsigned char value, unsigned long port) { if (PXSEG(port)) *(volatile unsigned char *)port = value; - else if (is_pci_ioaddr(port)) - *((unsigned char*)pci_ioaddr(port)) = value; else *(port2adr(port)) = value; ctrl_delay(); @@ -108,8 +96,6 @@ void snapgear_outw(unsigned short value, unsigned long port) { if (PXSEG(port)) *(volatile unsigned short *)port = value; - else if (is_pci_ioaddr(port)) - *((unsigned short *)pci_ioaddr(port)) = value; else if (port >= 0x2000) *port2adr(port) = value; else @@ -120,8 +106,6 @@ void snapgear_outl(unsigned int value, unsigned long port) { if (PXSEG(port)) *(volatile unsigned long *)port = value; - else if (is_pci_ioaddr(port)) - *((unsigned long*)pci_ioaddr(port)) = value; else maybebadio(port); } diff --git a/arch/sh/boards/mach-systemh/io.c b/arch/sh/boards/mach-systemh/io.c index dec3db0ee93..15577ff1f71 100644 --- a/arch/sh/boards/mach-systemh/io.c +++ b/arch/sh/boards/mach-systemh/io.c @@ -35,8 +35,6 @@ unsigned char sh7751systemh_inb(unsigned long port) { if (PXSEG(port)) return *(volatile unsigned char *)port; - else if (is_pci_ioaddr(port)) - return *(volatile unsigned char *)pci_ioaddr(port); else if (port <= 0x3F1) return *(volatile unsigned char *)ETHER_IOMAP(port); else @@ -49,8 +47,6 @@ unsigned char sh7751systemh_inb_p(unsigned long port) if (PXSEG(port)) v = *(volatile unsigned char *)port; - else if (is_pci_ioaddr(port)) - v = *(volatile unsigned char *)pci_ioaddr(port); else if (port <= 0x3F1) v = *(volatile unsigned char *)ETHER_IOMAP(port); else @@ -63,8 +59,6 @@ unsigned short sh7751systemh_inw(unsigned long port) { if (PXSEG(port)) return *(volatile unsigned short *)port; - else if (is_pci_ioaddr(port)) - return *(volatile unsigned short *)pci_ioaddr(port); else if (port >= 0x2000) return *port2adr(port); else if (port <= 0x3F1) @@ -78,8 +72,6 @@ unsigned int sh7751systemh_inl(unsigned long port) { if (PXSEG(port)) return *(volatile unsigned long *)port; - else if (is_pci_ioaddr(port)) - return *(volatile unsigned int *)pci_ioaddr(port); else if (port >= 0x2000) return *port2adr(port); else if (port <= 0x3F1) @@ -94,8 +86,6 @@ void sh7751systemh_outb(unsigned char value, unsigned long port) if (PXSEG(port)) *(volatile unsigned char *)port = value; - else if (is_pci_ioaddr(port)) - *((unsigned char*)pci_ioaddr(port)) = value; else if (port <= 0x3F1) *(volatile unsigned char *)ETHER_IOMAP(port) = value; else @@ -106,8 +96,6 @@ void sh7751systemh_outb_p(unsigned char value, unsigned long port) { if (PXSEG(port)) *(volatile unsigned char *)port = value; - else if (is_pci_ioaddr(port)) - *((unsigned char*)pci_ioaddr(port)) = value; else if (port <= 0x3F1) *(volatile unsigned char *)ETHER_IOMAP(port) = value; else @@ -119,8 +107,6 @@ void sh7751systemh_outw(unsigned short value, unsigned long port) { if (PXSEG(port)) *(volatile unsigned short *)port = value; - else if (is_pci_ioaddr(port)) - *((unsigned short *)pci_ioaddr(port)) = value; else if (port >= 0x2000) *port2adr(port) = value; else if (port <= 0x3F1) @@ -133,8 +119,6 @@ void sh7751systemh_outl(unsigned int value, unsigned long port) { if (PXSEG(port)) *(volatile unsigned long *)port = value; - else if (is_pci_ioaddr(port)) - *((unsigned long*)pci_ioaddr(port)) = value; else maybebadio(port); } diff --git a/arch/sh/boards/mach-titan/io.c b/arch/sh/boards/mach-titan/io.c index 053b3ed2ed8..0130e9826ac 100644 --- a/arch/sh/boards/mach-titan/io.c +++ b/arch/sh/boards/mach-titan/io.c @@ -17,8 +17,6 @@ u8 titan_inb(unsigned long port) { if (PXSEG(port)) return ctrl_inb(port); - else if (is_pci_ioaddr(port)) - return ctrl_inb(pci_ioaddr(port)); return ctrl_inw(port2adr(port)) & 0xff; } @@ -28,8 +26,6 @@ u8 titan_inb_p(unsigned long port) if (PXSEG(port)) v = ctrl_inb(port); - else if (is_pci_ioaddr(port)) - v = ctrl_inb(pci_ioaddr(port)); else v = ctrl_inw(port2adr(port)) & 0xff; ctrl_delay(); @@ -40,8 +36,6 @@ u16 titan_inw(unsigned long port) { if (PXSEG(port)) return ctrl_inw(port); - else if (is_pci_ioaddr(port)) - return ctrl_inw(pci_ioaddr(port)); else if (port >= 0x2000) return ctrl_inw(port2adr(port)); else @@ -53,8 +47,6 @@ u32 titan_inl(unsigned long port) { if (PXSEG(port)) return ctrl_inl(port); - else if (is_pci_ioaddr(port)) - return ctrl_inl(pci_ioaddr(port)); else if (port >= 0x2000) return ctrl_inw(port2adr(port)); else @@ -66,8 +58,6 @@ void titan_outb(u8 value, unsigned long port) { if (PXSEG(port)) ctrl_outb(value, port); - else if (is_pci_ioaddr(port)) - ctrl_outb(value, pci_ioaddr(port)); else ctrl_outw(value, port2adr(port)); } @@ -76,8 +66,6 @@ void titan_outb_p(u8 value, unsigned long port) { if (PXSEG(port)) ctrl_outb(value, port); - else if (is_pci_ioaddr(port)) - ctrl_outb(value, pci_ioaddr(port)); else ctrl_outw(value, port2adr(port)); ctrl_delay(); @@ -87,8 +75,6 @@ void titan_outw(u16 value, unsigned long port) { if (PXSEG(port)) ctrl_outw(value, port); - else if (is_pci_ioaddr(port)) - ctrl_outw(value, pci_ioaddr(port)); else if (port >= 0x2000) ctrl_outw(value, port2adr(port)); else @@ -99,8 +85,6 @@ void titan_outl(u32 value, unsigned long port) { if (PXSEG(port)) ctrl_outl(value, port); - else if (is_pci_ioaddr(port)) - ctrl_outl(value, pci_ioaddr(port)); else maybebadio(port); } @@ -119,8 +103,6 @@ void __iomem *titan_ioport_map(unsigned long port, unsigned int size) { if (PXSEG(port)) return (void __iomem *)port; - else if (is_pci_ioaddr(port)) - return (void __iomem *)pci_ioaddr(port); return (void __iomem *)port2adr(port); } -- cgit v1.2.3 From 0e75148108914062cb46ad3dc8f054a628018df7 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 20 Apr 2009 19:48:48 +0900 Subject: sh: pci: Consolidate pcibios_setup() in pci-lib. This wasn't really being used for anything useful, so just stub it in pci-lib. Signed-off-by: Paul Mundt --- arch/sh/drivers/pci/ops-dreamcast.c | 6 ------ arch/sh/drivers/pci/ops-sh4.c | 35 +++++++++++------------------------ arch/sh/drivers/pci/ops-sh5.c | 5 ----- arch/sh/drivers/pci/pci-lib.c | 5 +++++ 4 files changed, 16 insertions(+), 35 deletions(-) diff --git a/arch/sh/drivers/pci/ops-dreamcast.c b/arch/sh/drivers/pci/ops-dreamcast.c index 5bc81d5b660..529aa4f27a8 100644 --- a/arch/sh/drivers/pci/ops-dreamcast.c +++ b/arch/sh/drivers/pci/ops-dreamcast.c @@ -154,12 +154,6 @@ static int __init gapspci_init(struct pci_channel *chan) return 0; } -/* Haven't done anything here as yet */ -char * __devinit pcibios_setup(char *str) -{ - return str; -} - struct pci_channel board_pci_channels[] = { { gapspci_init, &gapspci_pci_ops, &gapspci_io_resource, &gapspci_mem_resource, 0, 1 }, diff --git a/arch/sh/drivers/pci/ops-sh4.c b/arch/sh/drivers/pci/ops-sh4.c index 2a7f7b50ff0..7cc1fccf1c5 100644 --- a/arch/sh/drivers/pci/ops-sh4.c +++ b/arch/sh/drivers/pci/ops-sh4.c @@ -106,30 +106,27 @@ struct pci_ops sh4_pci_ops = { * Not really related to pci_ops, but it's common and not worth shoving * somewhere else for now.. */ -static unsigned int pci_probe = PCI_PROBE_CONF1; - int __init sh4_pci_check_direct(struct pci_channel *chan) { /* * Check if configuration works. */ - if (pci_probe & PCI_PROBE_CONF1) { - unsigned int tmp = pci_read_reg(chan, SH4_PCIPAR); - - pci_write_reg(chan, P1SEG, SH4_PCIPAR); + unsigned int tmp = pci_read_reg(chan, SH4_PCIPAR); - if (pci_read_reg(chan, SH4_PCIPAR) == P1SEG) { - pci_write_reg(chan, tmp, SH4_PCIPAR); - printk(KERN_INFO "PCI: Using configuration type 1\n"); - request_region(chan->reg_base + SH4_PCIPAR, 8, - "PCI conf1"); - return 0; - } + pci_write_reg(chan, P1SEG, SH4_PCIPAR); + if (pci_read_reg(chan, SH4_PCIPAR) == P1SEG) { pci_write_reg(chan, tmp, SH4_PCIPAR); + printk(KERN_INFO "PCI: Using configuration type 1\n"); + request_region(chan->reg_base + SH4_PCIPAR, 8, + "PCI conf1"); + return 0; } - pr_debug("PCI: pci_check_direct failed\n"); + pci_write_reg(chan, tmp, SH4_PCIPAR); + + printk(KERN_ERR "PCI: %s failed\n", __func__); + return -EINVAL; } @@ -155,16 +152,6 @@ static void __init pci_fixup_ide_bases(struct pci_dev *d) } DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_ide_bases); -char * __devinit pcibios_setup(char *str) -{ - if (!strcmp(str, "off")) { - pci_probe = 0; - return NULL; - } - - return str; -} - int __attribute__((weak)) pci_fixup_pcic(struct pci_channel *chan) { /* Nothing to do. */ diff --git a/arch/sh/drivers/pci/ops-sh5.c b/arch/sh/drivers/pci/ops-sh5.c index 729e38a6fe0..b10e2d5f425 100644 --- a/arch/sh/drivers/pci/ops-sh5.c +++ b/arch/sh/drivers/pci/ops-sh5.c @@ -42,11 +42,6 @@ static void __init pci_fixup_ide_bases(struct pci_dev *d) } DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_ide_bases); -char * __devinit pcibios_setup(char *str) -{ - return str; -} - static int sh5pci_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *val) { diff --git a/arch/sh/drivers/pci/pci-lib.c b/arch/sh/drivers/pci/pci-lib.c index ea836294584..f072acafce6 100644 --- a/arch/sh/drivers/pci/pci-lib.c +++ b/arch/sh/drivers/pci/pci-lib.c @@ -134,6 +134,11 @@ void __init pcibios_update_irq(struct pci_dev *dev, int irq) pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq); } +char * __devinit pcibios_setup(char *str) +{ + return str; +} + int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, enum pci_mmap_state mmap_state, int write_combine) { -- cgit v1.2.3 From 0db38cea69fc478a5c25b3c915ec680cc5538783 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 20 Apr 2009 19:54:47 +0900 Subject: sh: pci: Kill off legacy ide quirks. These fixups seem to have bitrotted a bit since their introduction in the 2.4 days. As we never had much use for them in the first place, and nothing is using them any more, kill them off the rest of the way. Signed-off-by: Paul Mundt --- arch/sh/drivers/pci/ops-sh4.c | 22 ---------------------- arch/sh/drivers/pci/ops-sh5.c | 20 -------------------- 2 files changed, 42 deletions(-) diff --git a/arch/sh/drivers/pci/ops-sh4.c b/arch/sh/drivers/pci/ops-sh4.c index 7cc1fccf1c5..78bebebdc99 100644 --- a/arch/sh/drivers/pci/ops-sh4.c +++ b/arch/sh/drivers/pci/ops-sh4.c @@ -130,28 +130,6 @@ int __init sh4_pci_check_direct(struct pci_channel *chan) return -EINVAL; } -/* Handle generic fixups */ -static void __init pci_fixup_ide_bases(struct pci_dev *d) -{ - int i; - - /* - * PCI IDE controllers use non-standard I/O port decoding, respect it. - */ - if ((d->class >> 8) != PCI_CLASS_STORAGE_IDE) - return; - pr_debug("PCI: IDE base address fixup for %s\n", pci_name(d)); - for(i = 0; i < 4; i++) { - struct resource *r = &d->resource[i]; - - if ((r->start & ~0x80) == 0x374) { - r->start |= 2; - r->end = r->start; - } - } -} -DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_ide_bases); - int __attribute__((weak)) pci_fixup_pcic(struct pci_channel *chan) { /* Nothing to do. */ diff --git a/arch/sh/drivers/pci/ops-sh5.c b/arch/sh/drivers/pci/ops-sh5.c index b10e2d5f425..4ce95a001b8 100644 --- a/arch/sh/drivers/pci/ops-sh5.c +++ b/arch/sh/drivers/pci/ops-sh5.c @@ -22,26 +22,6 @@ #include #include "pci-sh5.h" -static void __init pci_fixup_ide_bases(struct pci_dev *d) -{ - int i; - - /* - * PCI IDE controllers use non-standard I/O port decoding, respect it. - */ - if ((d->class >> 8) != PCI_CLASS_STORAGE_IDE) - return; - printk("PCI: IDE base address fixup for %s\n", pci_name(d)); - for(i=0; i<4; i++) { - struct resource *r = &d->resource[i]; - if ((r->start & ~0x80) == 0x374) { - r->start |= 2; - r->end = r->start; - } - } -} -DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_ide_bases); - static int sh5pci_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *val) { -- cgit v1.2.3 From 3444f5ec49bc6cb901ffea38e085db1d76e1189c Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 20 Apr 2009 20:22:05 +0900 Subject: sh: pci: Tidy up the dreamcast PCI support. Signed-off-by: Paul Mundt --- arch/sh/drivers/pci/Makefile | 3 +- arch/sh/drivers/pci/ops-dreamcast.c | 98 +++------------------------- arch/sh/drivers/pci/pci-dreamcast.c | 105 ++++++++++++++++++++++++++++++ arch/sh/include/mach-dreamcast/mach/pci.h | 2 + 4 files changed, 119 insertions(+), 89 deletions(-) create mode 100644 arch/sh/drivers/pci/pci-dreamcast.c diff --git a/arch/sh/drivers/pci/Makefile b/arch/sh/drivers/pci/Makefile index 4cac866d55d..2160a06b6c1 100644 --- a/arch/sh/drivers/pci/Makefile +++ b/arch/sh/drivers/pci/Makefile @@ -12,7 +12,8 @@ obj-$(CONFIG_CPU_SUBTYPE_SH7780) += pci-sh7780.o ops-sh4.o obj-$(CONFIG_CPU_SUBTYPE_SH7785) += pci-sh7780.o ops-sh4.o obj-$(CONFIG_CPU_SH5) += pci-sh5.o ops-sh5.o -obj-$(CONFIG_SH_DREAMCAST) += ops-dreamcast.o fixups-dreamcast.o +obj-$(CONFIG_SH_DREAMCAST) += ops-dreamcast.o fixups-dreamcast.o \ + pci-dreamcast.o obj-$(CONFIG_SH_SECUREEDGE5410) += ops-snapgear.o obj-$(CONFIG_SH_RTS7751R2D) += ops-rts7751r2d.o fixups-rts7751r2d.o obj-$(CONFIG_SH_SH03) += ops-sh03.o fixups-sh03.o diff --git a/arch/sh/drivers/pci/ops-dreamcast.c b/arch/sh/drivers/pci/ops-dreamcast.c index 529aa4f27a8..e83d0d3aabe 100644 --- a/arch/sh/drivers/pci/ops-dreamcast.c +++ b/arch/sh/drivers/pci/ops-dreamcast.c @@ -1,15 +1,9 @@ /* - * arch/sh/drivers/pci/ops-dreamcast.c - * * PCI operations for the Sega Dreamcast * * Copyright (C) 2001, 2002 M. R. Brown * Copyright (C) 2002, 2003 Paul Mundt * - * This file originally bore the message (with enclosed-$): - * Id: pci.c,v 1.3 2003/05/04 19:29:46 lethal Exp - * Dreamcast PCI: Supports SEGA Broadband Adaptor only. - * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive * for more details. @@ -23,25 +17,10 @@ #include #include #include - -#include -#include +#include +#include #include -static struct resource gapspci_io_resource = { - .name = "GAPSPCI IO", - .start = GAPSPCI_BBA_CONFIG, - .end = GAPSPCI_BBA_CONFIG + GAPSPCI_BBA_CONFIG_SIZE - 1, - .flags = IORESOURCE_IO, -}; - -static struct resource gapspci_mem_resource = { - .name = "GAPSPCI mem", - .start = GAPSPCI_DMA_BASE, - .end = GAPSPCI_DMA_BASE + GAPSPCI_DMA_SIZE - 1, - .flags = IORESOURCE_MEM, -}; - /* * The !gapspci_config_access case really shouldn't happen, ever, unless * someone implicitly messes around with the last devfn value.. otherwise we @@ -76,10 +55,10 @@ static int gapspci_read(struct pci_bus *bus, unsigned int devfn, int where, int return PCIBIOS_DEVICE_NOT_FOUND; switch (size) { - case 1: *val = inb(GAPSPCI_BBA_CONFIG+where); break; - case 2: *val = inw(GAPSPCI_BBA_CONFIG+where); break; - case 4: *val = inl(GAPSPCI_BBA_CONFIG+where); break; - } + case 1: *val = inb(GAPSPCI_BBA_CONFIG+where); break; + case 2: *val = inw(GAPSPCI_BBA_CONFIG+where); break; + case 4: *val = inl(GAPSPCI_BBA_CONFIG+where); break; + } return PCIBIOS_SUCCESSFUL; } @@ -90,72 +69,15 @@ static int gapspci_write(struct pci_bus *bus, unsigned int devfn, int where, int return PCIBIOS_DEVICE_NOT_FOUND; switch (size) { - case 1: outb(( u8)val, GAPSPCI_BBA_CONFIG+where); break; - case 2: outw((u16)val, GAPSPCI_BBA_CONFIG+where); break; - case 4: outl((u32)val, GAPSPCI_BBA_CONFIG+where); break; + case 1: outb(( u8)val, GAPSPCI_BBA_CONFIG+where); break; + case 2: outw((u16)val, GAPSPCI_BBA_CONFIG+where); break; + case 4: outl((u32)val, GAPSPCI_BBA_CONFIG+where); break; } return PCIBIOS_SUCCESSFUL; } -static struct pci_ops gapspci_pci_ops = { +struct pci_ops gapspci_pci_ops = { .read = gapspci_read, .write = gapspci_write, }; - -/* - * gapspci init - */ - -static int __init gapspci_init(struct pci_channel *chan) -{ - char idbuf[16]; - int i; - - /* - * FIXME: All of this wants documenting to some degree, - * even some basic register definitions would be nice. - * - * I haven't seen anything this ugly since.. maple. - */ - - for (i=0; i<16; i++) - idbuf[i] = inb(GAPSPCI_REGS+i); - - if (strncmp(idbuf, "GAPSPCI_BRIDGE_2", 16)) - return -ENODEV; - - outl(0x5a14a501, GAPSPCI_REGS+0x18); - - for (i=0; i<1000000; i++) - ; - - if (inl(GAPSPCI_REGS+0x18) != 1) - return -EINVAL; - - outl(0x01000000, GAPSPCI_REGS+0x20); - outl(0x01000000, GAPSPCI_REGS+0x24); - - outl(GAPSPCI_DMA_BASE, GAPSPCI_REGS+0x28); - outl(GAPSPCI_DMA_BASE+GAPSPCI_DMA_SIZE, GAPSPCI_REGS+0x2c); - - outl(1, GAPSPCI_REGS+0x14); - outl(1, GAPSPCI_REGS+0x34); - - /* Setting Broadband Adapter */ - outw(0xf900, GAPSPCI_BBA_CONFIG+0x06); - outl(0x00000000, GAPSPCI_BBA_CONFIG+0x30); - outb(0x00, GAPSPCI_BBA_CONFIG+0x3c); - outb(0xf0, GAPSPCI_BBA_CONFIG+0x0d); - outw(0x0006, GAPSPCI_BBA_CONFIG+0x04); - outl(0x00002001, GAPSPCI_BBA_CONFIG+0x10); - outl(0x01000000, GAPSPCI_BBA_CONFIG+0x14); - - return 0; -} - -struct pci_channel board_pci_channels[] = { - { gapspci_init, &gapspci_pci_ops, &gapspci_io_resource, - &gapspci_mem_resource, 0, 1 }, - { 0, } -}; diff --git a/arch/sh/drivers/pci/pci-dreamcast.c b/arch/sh/drivers/pci/pci-dreamcast.c new file mode 100644 index 00000000000..0897be5053d --- /dev/null +++ b/arch/sh/drivers/pci/pci-dreamcast.c @@ -0,0 +1,105 @@ +/* + * PCI support for the Sega Dreamcast + * + * Copyright (C) 2001, 2002 M. R. Brown + * Copyright (C) 2002, 2003 Paul Mundt + * + * This file originally bore the message (with enclosed-$): + * Id: pci.c,v 1.3 2003/05/04 19:29:46 lethal Exp + * Dreamcast PCI: Supports SEGA Broadband Adaptor only. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +static struct resource gapspci_io_resource = { + .name = "GAPSPCI IO", + .start = GAPSPCI_BBA_CONFIG, + .end = GAPSPCI_BBA_CONFIG + GAPSPCI_BBA_CONFIG_SIZE - 1, + .flags = IORESOURCE_IO, +}; + +static struct resource gapspci_mem_resource = { + .name = "GAPSPCI mem", + .start = GAPSPCI_DMA_BASE, + .end = GAPSPCI_DMA_BASE + GAPSPCI_DMA_SIZE - 1, + .flags = IORESOURCE_MEM, +}; + +/* + * gapspci init + */ + +static int __init gapspci_init(struct pci_channel *chan) +{ + char idbuf[16]; + int i; + + /* + * FIXME: All of this wants documenting to some degree, + * even some basic register definitions would be nice. + * + * I haven't seen anything this ugly since.. maple. + */ + + for (i=0; i<16; i++) + idbuf[i] = inb(GAPSPCI_REGS+i); + + if (strncmp(idbuf, "GAPSPCI_BRIDGE_2", 16)) + return -ENODEV; + + outl(0x5a14a501, GAPSPCI_REGS+0x18); + + for (i=0; i<1000000; i++) + cpu_relax(); + + if (inl(GAPSPCI_REGS+0x18) != 1) + return -EINVAL; + + outl(0x01000000, GAPSPCI_REGS+0x20); + outl(0x01000000, GAPSPCI_REGS+0x24); + + outl(GAPSPCI_DMA_BASE, GAPSPCI_REGS+0x28); + outl(GAPSPCI_DMA_BASE+GAPSPCI_DMA_SIZE, GAPSPCI_REGS+0x2c); + + outl(1, GAPSPCI_REGS+0x14); + outl(1, GAPSPCI_REGS+0x34); + + /* Setting Broadband Adapter */ + outw(0xf900, GAPSPCI_BBA_CONFIG+0x06); + outl(0x00000000, GAPSPCI_BBA_CONFIG+0x30); + outb(0x00, GAPSPCI_BBA_CONFIG+0x3c); + outb(0xf0, GAPSPCI_BBA_CONFIG+0x0d); + outw(0x0006, GAPSPCI_BBA_CONFIG+0x04); + outl(0x00002001, GAPSPCI_BBA_CONFIG+0x10); + outl(0x01000000, GAPSPCI_BBA_CONFIG+0x14); + + return 0; +} + +struct pci_channel board_pci_channels[] = { + { + .init = gapspci_init, + .pci_ops = &gapspci_pci_ops, + .io_resource = &gapspci_io_resource, + .mem_resource = &gapspci_mem_resource, + .first_devfn = 0, + .last_devfn = 1, + }, { + .init = NULL, + } +}; diff --git a/arch/sh/include/mach-dreamcast/mach/pci.h b/arch/sh/include/mach-dreamcast/mach/pci.h index 75fc9009e09..0314d975e62 100644 --- a/arch/sh/include/mach-dreamcast/mach/pci.h +++ b/arch/sh/include/mach-dreamcast/mach/pci.h @@ -21,5 +21,7 @@ #define GAPSPCI_IRQ HW_EVENT_EXTERNAL +extern struct pci_ops gapspci_pci_ops; + #endif /* __ASM_SH_DREAMCAST_PCI_H */ -- cgit v1.2.3 From 5d4af1be06affa2b42cdf59cd376752be1f934b3 Mon Sep 17 00:00:00 2001 From: Karsten Wiese Date: Mon, 20 Apr 2009 13:01:21 +0200 Subject: ALSA: us122l: add snd_us122l_free() Use it to clean up snd_us122l_card_used[]. Without patch unplugging of an US122L soundcard didn't reset the corresponding element of snd_us122l_card_used[] to 0. The (SNDRV_CARDS + 1)th plugging in did not result in creating the soundcard device anymore. Index values supplied with the modprobe command line were not used correctly anymore after the first unplugging of an US122L. Signed-off-by: Karsten Wiese Cc: stable@kernel.org Signed-off-by: Takashi Iwai --- sound/usb/usx2y/us122l.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/sound/usb/usx2y/us122l.c b/sound/usb/usx2y/us122l.c index 98276aafefe..463f3ffe3fb 100644 --- a/sound/usb/usx2y/us122l.c +++ b/sound/usb/usx2y/us122l.c @@ -478,6 +478,14 @@ static bool us122l_create_card(struct snd_card *card) return true; } +static void snd_us122l_free(struct snd_card *card) +{ + struct us122l *us122l = US122L(card); + int index = us122l->chip.index; + if (index >= 0 && index < SNDRV_CARDS) + snd_us122l_card_used[index] = 0; +} + static int usx2y_create_card(struct usb_device *device, struct snd_card **cardp) { int dev; @@ -494,7 +502,7 @@ static int usx2y_create_card(struct usb_device *device, struct snd_card **cardp) if (err < 0) return err; snd_us122l_card_used[US122L(card)->chip.index = dev] = 1; - + card->private_free = snd_us122l_free; US122L(card)->chip.dev = device; US122L(card)->chip.card = card; mutex_init(&US122L(card)->mutex); @@ -588,7 +596,7 @@ static void snd_us122l_disconnect(struct usb_interface *intf) } usb_put_intf(intf); - usb_put_dev(US122L(card)->chip.dev); + usb_put_dev(us122l->chip.dev); while (atomic_read(&us122l->mmap_count)) msleep(500); -- cgit v1.2.3 From 48e4237d96fdcb1237b63bcddb37771f97452eec Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 20 Apr 2009 20:40:48 +0900 Subject: sh: pci: Convert the SH-5 code over to the new interface. Signed-off-by: Paul Mundt --- arch/sh/drivers/pci/Kconfig | 2 +- arch/sh/drivers/pci/ops-cayman.c | 11 -------- arch/sh/drivers/pci/pci-sh5.c | 58 +++++++++++++++------------------------- arch/sh/drivers/pci/pci-sh5.h | 4 --- 4 files changed, 23 insertions(+), 52 deletions(-) diff --git a/arch/sh/drivers/pci/Kconfig b/arch/sh/drivers/pci/Kconfig index efe8cf965a9..f9fb1d1b623 100644 --- a/arch/sh/drivers/pci/Kconfig +++ b/arch/sh/drivers/pci/Kconfig @@ -23,7 +23,7 @@ config PCI_NEW bool depends on PCI default y if CPU_SUBTYPE_SH7763 || CPU_SUBTYPE_SH7780 || \ - CPU_SUBTYPE_SH7785 + CPU_SUBTYPE_SH7785 || CPU_SH5 # This is also board-specific config PCI_AUTO diff --git a/arch/sh/drivers/pci/ops-cayman.c b/arch/sh/drivers/pci/ops-cayman.c index cbaaf0234b7..b68b61d22c6 100644 --- a/arch/sh/drivers/pci/ops-cayman.c +++ b/arch/sh/drivers/pci/ops-cayman.c @@ -75,14 +75,3 @@ int __init pcibios_map_platform_irq(struct pci_dev *dev, u8 slot, u8 pin) return result; } - -struct pci_channel board_pci_channels[] = { - { sh5_pci_init, &sh5_pci_ops, NULL, NULL, 0, 0xff }, - { NULL, NULL, NULL, 0, 0 }, -}; - -int __init pcibios_init_platform(void) -{ - return sh5pci_init(__pa(memory_start), - __pa(memory_end) - __pa(memory_start)); -} diff --git a/arch/sh/drivers/pci/pci-sh5.c b/arch/sh/drivers/pci/pci-sh5.c index 7750da27628..cf431852213 100644 --- a/arch/sh/drivers/pci/pci-sh5.c +++ b/arch/sh/drivers/pci/pci-sh5.c @@ -27,12 +27,6 @@ unsigned long pcicr_virt; unsigned long PCI_IO_AREA; -int __init sh5_pci_init(struct pci_channel *chan) -{ - pr_debug("PCI: Starting intialization.\n"); - return pcibios_init_platform(); -} - /* Rounds a number UP to the nearest power of two. Used for * sizing the PCI window. */ @@ -95,8 +89,21 @@ static irqreturn_t pcish5_serr_irq(int irq, void *dev_id) return IRQ_NONE; } -int __init sh5pci_init(unsigned long memStart, unsigned long memSize) +static struct resource sh5_io_resource = { /* place holder */ }; +static struct resource sh5_mem_resource = { /* place holder */ }; + +static struct pci_channel sh5pci_controller = { + .pci_ops = &sh5_pci_ops, + .mem_resource = &sh5_mem_resource, + .mem_offset = 0x00000000, + .io_resource = &sh5_io_resource, + .io_offset = 0x00000000, +}; + +static int __init sh5pci_init(void) { + unsigned long memStart = __pa(memory_start); + unsigned long memSize = __pa(memory_end) - memStart; u32 lsr0; u32 uval; @@ -203,35 +210,14 @@ int __init sh5pci_init(unsigned long memStart, unsigned long memSize) SH5PCI_WRITE(AINTM, ~0); SH5PCI_WRITE(PINTM, ~0); - return 0; -} + sh5_io_resource.start = PCI_IO_AREA; + sh5_io_resource.end = PCI_IO_AREA + 0x10000; -#define xPCIBIOS_MIN_IO board_pci_channels->io_resource->start -#define xPCIBIOS_MIN_MEM board_pci_channels->mem_resource->start + sh5_mem_resource.start = memStart; + sh5_mem_resource.end = memStart + memSize; -void __devinit pcibios_fixup_bus(struct pci_bus *bus) -{ - struct pci_dev *dev = bus->self; - int i; - - if (dev) { - for (i= 0; i < 3; i++) { - bus->resource[i] = - &dev->resource[PCI_BRIDGE_RESOURCES+i]; - bus->resource[i]->name = bus->name; - } - bus->resource[0]->flags |= IORESOURCE_IO; - bus->resource[1]->flags |= IORESOURCE_MEM; - - /* For now, propagate host limits to the bus; - * we'll adjust them later. */ - bus->resource[0]->end = 64*1024 - 1 ; - bus->resource[1]->end = xPCIBIOS_MIN_MEM+(256*1024*1024)-1; - bus->resource[0]->start = xPCIBIOS_MIN_IO; - bus->resource[1]->start = xPCIBIOS_MIN_MEM; - - /* Turn off downstream PF memory address range by default */ - bus->resource[2]->start = 1024*1024; - bus->resource[2]->end = bus->resource[2]->start - 1; - } + register_pci_controller(&sh5pci_controller); + + return 0; } +arch_initcall(sh5pci_init); diff --git a/arch/sh/drivers/pci/pci-sh5.h b/arch/sh/drivers/pci/pci-sh5.h index af09f384c7d..f277628221f 100644 --- a/arch/sh/drivers/pci/pci-sh5.h +++ b/arch/sh/drivers/pci/pci-sh5.h @@ -107,8 +107,4 @@ extern unsigned long pcicr_virt; extern struct pci_ops sh5_pci_ops; -/* arch/sh/drivers/pci/pci-sh5.c */ -int sh5_pci_init(struct pci_channel *chan); -int sh5pci_init(unsigned long memStart, unsigned long memSize); - #endif /* __PCI_SH5_H */ -- cgit v1.2.3 From a5b08047129f214af1899bd9088605c7adc21ed5 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 20 Apr 2009 20:41:45 +0900 Subject: sh: pci: Rename ops-cayman -> fixups-cayman. Now that ops-cayman.c only contains IRQ routing fixups, rename it. Signed-off-by: Paul Mundt --- arch/sh/drivers/pci/Makefile | 2 +- arch/sh/drivers/pci/fixups-cayman.c | 77 +++++++++++++++++++++++++++++++++++++ arch/sh/drivers/pci/ops-cayman.c | 77 ------------------------------------- 3 files changed, 78 insertions(+), 78 deletions(-) create mode 100644 arch/sh/drivers/pci/fixups-cayman.c delete mode 100644 arch/sh/drivers/pci/ops-cayman.c diff --git a/arch/sh/drivers/pci/Makefile b/arch/sh/drivers/pci/Makefile index 2160a06b6c1..cb2190c3e36 100644 --- a/arch/sh/drivers/pci/Makefile +++ b/arch/sh/drivers/pci/Makefile @@ -24,4 +24,4 @@ obj-$(CONFIG_SH_7780_SOLUTION_ENGINE) += fixups-sdk7780.o obj-$(CONFIG_SH_TITAN) += ops-titan.o obj-$(CONFIG_SH_LANDISK) += ops-landisk.o obj-$(CONFIG_SH_LBOX_RE2) += ops-lboxre2.o fixups-rts7751r2d.o -obj-$(CONFIG_SH_CAYMAN) += ops-cayman.o +obj-$(CONFIG_SH_CAYMAN) += fixups-cayman.o diff --git a/arch/sh/drivers/pci/fixups-cayman.c b/arch/sh/drivers/pci/fixups-cayman.c new file mode 100644 index 00000000000..b68b61d22c6 --- /dev/null +++ b/arch/sh/drivers/pci/fixups-cayman.c @@ -0,0 +1,77 @@ +#include +#include +#include +#include +#include +#include "pci-sh5.h" + +int __init pcibios_map_platform_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + int result = -1; + + /* The complication here is that the PCI IRQ lines from the Cayman's 2 + 5V slots get into the CPU via a different path from the IRQ lines + from the 3 3.3V slots. Thus, we have to detect whether the card's + interrupts go via the 5V or 3.3V path, i.e. the 'bridge swizzling' + at the point where we cross from 5V to 3.3V is not the normal case. + + The added complication is that we don't know that the 5V slots are + always bus 2, because a card containing a PCI-PCI bridge may be + plugged into a 3.3V slot, and this changes the bus numbering. + + Also, the Cayman has an intermediate PCI bus that goes a custom + expansion board header (and to the secondary bridge). This bus has + never been used in practice. + + The 1ary onboard PCI-PCI bridge is device 3 on bus 0 + The 2ary onboard PCI-PCI bridge is device 0 on the 2ary bus of + the 1ary bridge. + */ + + struct slot_pin { + int slot; + int pin; + } path[4]; + int i=0; + + while (dev->bus->number > 0) { + + slot = path[i].slot = PCI_SLOT(dev->devfn); + pin = path[i].pin = pci_swizzle_interrupt_pin(dev, pin); + dev = dev->bus->self; + i++; + if (i > 3) panic("PCI path to root bus too long!\n"); + } + + slot = PCI_SLOT(dev->devfn); + /* This is the slot on bus 0 through which the device is eventually + reachable. */ + + /* Now work back up. */ + if ((slot < 3) || (i == 0)) { + /* Bus 0 (incl. PCI-PCI bridge itself) : perform the final + swizzle now. */ + result = IRQ_INTA + pci_swizzle_interrupt_pin(dev, pin) - 1; + } else { + i--; + slot = path[i].slot; + pin = path[i].pin; + if (slot > 0) { + panic("PCI expansion bus device found - not handled!\n"); + } else { + if (i > 0) { + /* 5V slots */ + i--; + slot = path[i].slot; + pin = path[i].pin; + /* 'pin' was swizzled earlier wrt slot, don't do it again. */ + result = IRQ_P2INTA + (pin - 1); + } else { + /* IRQ for 2ary PCI-PCI bridge : unused */ + result = -1; + } + } + } + + return result; +} diff --git a/arch/sh/drivers/pci/ops-cayman.c b/arch/sh/drivers/pci/ops-cayman.c deleted file mode 100644 index b68b61d22c6..00000000000 --- a/arch/sh/drivers/pci/ops-cayman.c +++ /dev/null @@ -1,77 +0,0 @@ -#include -#include -#include -#include -#include -#include "pci-sh5.h" - -int __init pcibios_map_platform_irq(struct pci_dev *dev, u8 slot, u8 pin) -{ - int result = -1; - - /* The complication here is that the PCI IRQ lines from the Cayman's 2 - 5V slots get into the CPU via a different path from the IRQ lines - from the 3 3.3V slots. Thus, we have to detect whether the card's - interrupts go via the 5V or 3.3V path, i.e. the 'bridge swizzling' - at the point where we cross from 5V to 3.3V is not the normal case. - - The added complication is that we don't know that the 5V slots are - always bus 2, because a card containing a PCI-PCI bridge may be - plugged into a 3.3V slot, and this changes the bus numbering. - - Also, the Cayman has an intermediate PCI bus that goes a custom - expansion board header (and to the secondary bridge). This bus has - never been used in practice. - - The 1ary onboard PCI-PCI bridge is device 3 on bus 0 - The 2ary onboard PCI-PCI bridge is device 0 on the 2ary bus of - the 1ary bridge. - */ - - struct slot_pin { - int slot; - int pin; - } path[4]; - int i=0; - - while (dev->bus->number > 0) { - - slot = path[i].slot = PCI_SLOT(dev->devfn); - pin = path[i].pin = pci_swizzle_interrupt_pin(dev, pin); - dev = dev->bus->self; - i++; - if (i > 3) panic("PCI path to root bus too long!\n"); - } - - slot = PCI_SLOT(dev->devfn); - /* This is the slot on bus 0 through which the device is eventually - reachable. */ - - /* Now work back up. */ - if ((slot < 3) || (i == 0)) { - /* Bus 0 (incl. PCI-PCI bridge itself) : perform the final - swizzle now. */ - result = IRQ_INTA + pci_swizzle_interrupt_pin(dev, pin) - 1; - } else { - i--; - slot = path[i].slot; - pin = path[i].pin; - if (slot > 0) { - panic("PCI expansion bus device found - not handled!\n"); - } else { - if (i > 0) { - /* 5V slots */ - i--; - slot = path[i].slot; - pin = path[i].pin; - /* 'pin' was swizzled earlier wrt slot, don't do it again. */ - result = IRQ_P2INTA + (pin - 1); - } else { - /* IRQ for 2ary PCI-PCI bridge : unused */ - result = -1; - } - } - } - - return result; -} -- cgit v1.2.3 From e3ba906ad17330e44fad5af42a423417249c6e09 Mon Sep 17 00:00:00 2001 From: Daniel T Chen Date: Mon, 20 Apr 2009 07:09:11 -0400 Subject: ALSA: Atiixp: Add SSID for mute_led quirk (unknown HP model) Reference: Ubuntu #84973 (https://launchpad.net/bugs/84973) Reference: Linux #8001 (http://bugzilla.kernel.org/show_bug.cgi?id=8001) Make the mute LED function properly on this unknown HP model. Signed-off-by: Daniel T Chen Signed-off-by: Takashi Iwai --- sound/pci/atiixp.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/sound/pci/atiixp.c b/sound/pci/atiixp.c index 9ce8548c03e..71515ddb459 100644 --- a/sound/pci/atiixp.c +++ b/sound/pci/atiixp.c @@ -1393,6 +1393,12 @@ static struct ac97_quirk ac97_quirks[] __devinitdata = { .name = "HP nx6125", .type = AC97_TUNE_MUTE_LED }, + { + .subvendor = 0x103c, + .subdevice = 0x3091, + .name = "unknown HP", + .type = AC97_TUNE_MUTE_LED + }, { } /* terminator */ }; -- cgit v1.2.3 From 757e3c16f8bafa2a470aebf9b04671c5d4d18f49 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 20 Apr 2009 21:11:07 +0900 Subject: sh: pci: Rewrite SH7751 PCI support to follow SH7780. This follows the similar sort of scheme that the refactored SH7780 code uses, using a 64MB CS3 mapping to handle the window0 case, and simply discarding window1. This vastly simplifies the code, and allows most of the board-specific setup to go die. Signed-off-by: Paul Mundt --- arch/sh/drivers/pci/Kconfig | 3 +- arch/sh/drivers/pci/Makefile | 2 +- arch/sh/drivers/pci/ops-landisk.c | 31 -------- arch/sh/drivers/pci/ops-lboxre2.c | 33 --------- arch/sh/drivers/pci/ops-rts7751r2d.c | 34 --------- arch/sh/drivers/pci/ops-sh03.c | 45 ------------ arch/sh/drivers/pci/ops-snapgear.c | 49 ------------- arch/sh/drivers/pci/ops-titan.c | 36 ---------- arch/sh/drivers/pci/pci-sh7751.c | 135 ++++++++++++++++++----------------- arch/sh/drivers/pci/pci-sh7751.h | 13 +--- 10 files changed, 76 insertions(+), 305 deletions(-) delete mode 100644 arch/sh/drivers/pci/ops-sh03.c diff --git a/arch/sh/drivers/pci/Kconfig b/arch/sh/drivers/pci/Kconfig index f9fb1d1b623..5aaee3c707b 100644 --- a/arch/sh/drivers/pci/Kconfig +++ b/arch/sh/drivers/pci/Kconfig @@ -23,7 +23,8 @@ config PCI_NEW bool depends on PCI default y if CPU_SUBTYPE_SH7763 || CPU_SUBTYPE_SH7780 || \ - CPU_SUBTYPE_SH7785 || CPU_SH5 + CPU_SUBTYPE_SH7785 || CPU_SH5 || \ + CPU_SUBTYPE_SH7751 || CPU_SUBTYPE_SH7751R # This is also board-specific config PCI_AUTO diff --git a/arch/sh/drivers/pci/Makefile b/arch/sh/drivers/pci/Makefile index cb2190c3e36..b8667de19ec 100644 --- a/arch/sh/drivers/pci/Makefile +++ b/arch/sh/drivers/pci/Makefile @@ -16,7 +16,7 @@ obj-$(CONFIG_SH_DREAMCAST) += ops-dreamcast.o fixups-dreamcast.o \ pci-dreamcast.o obj-$(CONFIG_SH_SECUREEDGE5410) += ops-snapgear.o obj-$(CONFIG_SH_RTS7751R2D) += ops-rts7751r2d.o fixups-rts7751r2d.o -obj-$(CONFIG_SH_SH03) += ops-sh03.o fixups-sh03.o +obj-$(CONFIG_SH_SH03) += fixups-sh03.o obj-$(CONFIG_SH_HIGHLANDER) += fixups-r7780rp.o obj-$(CONFIG_SH_SH7785LCR) += fixups-r7780rp.o obj-$(CONFIG_SH_SDK7780) += fixups-sdk7780.o diff --git a/arch/sh/drivers/pci/ops-landisk.c b/arch/sh/drivers/pci/ops-landisk.c index 178b77828aa..bb1a6bb5149 100644 --- a/arch/sh/drivers/pci/ops-landisk.c +++ b/arch/sh/drivers/pci/ops-landisk.c @@ -15,37 +15,6 @@ #include #include "pci-sh4.h" -static struct resource sh7751_io_resource = { - .name = "SH7751 IO", - .start = SH7751_PCI_IO_BASE, - .end = SH7751_PCI_IO_BASE + SH7751_PCI_IO_SIZE - 1, - .flags = IORESOURCE_IO -}; - -static struct resource sh7751_mem_resource = { - .name = "SH7751 mem", - .start = SH7751_PCI_MEMORY_BASE, - .end = SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1, - .flags = IORESOURCE_MEM -}; - -struct pci_channel board_pci_channels[] = { - { sh7751_pci_init, &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0x3ff}, - {NULL, NULL, NULL, 0, 0}, -}; - -static struct sh4_pci_address_map sh7751_pci_map = { - .window0 = { - .base = SH7751_CS3_BASE_ADDR, - .size = (64 << 20), /* 64MB */ - }, -}; - -int __init pcibios_init_platform(void) -{ - return sh7751_pcic_init(&board_pci_channels[0], &sh7751_pci_map); -} - int pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) { /* diff --git a/arch/sh/drivers/pci/ops-lboxre2.c b/arch/sh/drivers/pci/ops-lboxre2.c index 91cabd84f02..6db2c209737 100644 --- a/arch/sh/drivers/pci/ops-lboxre2.c +++ b/arch/sh/drivers/pci/ops-lboxre2.c @@ -21,36 +21,3 @@ int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) { return lboxre2_irq_tab[slot]; } - -static struct resource sh7751_io_resource = { - .name = "SH7751_IO", - .start = SH7751_PCI_IO_BASE , - .end = SH7751_PCI_IO_BASE + SH7751_PCI_IO_SIZE - 1, - .flags = IORESOURCE_IO -}; - -static struct resource sh7751_mem_resource = { - .name = "SH7751_mem", - .start = SH7751_PCI_MEMORY_BASE, - .end = SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1, - .flags = IORESOURCE_MEM -}; - -extern struct pci_ops sh7751_pci_ops; - -struct pci_channel board_pci_channels[] = { - { sh7751_pci_init, &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff }, - { NULL, NULL, NULL, 0, 0 }, -}; - -static struct sh4_pci_address_map sh7751_pci_map = { - .window0 = { - .base = SH7751_CS3_BASE_ADDR, - .size = 0x04000000, - }, -}; - -int __init pcibios_init_platform(void) -{ - return sh7751_pcic_init(&board_pci_channels[0], &sh7751_pci_map); -} diff --git a/arch/sh/drivers/pci/ops-rts7751r2d.c b/arch/sh/drivers/pci/ops-rts7751r2d.c index 96b916c0d6c..d950b8ab25f 100644 --- a/arch/sh/drivers/pci/ops-rts7751r2d.c +++ b/arch/sh/drivers/pci/ops-rts7751r2d.c @@ -29,37 +29,3 @@ int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) { return rts7751r2d_irq_tab[slot]; } - -static struct resource sh7751_io_resource = { - .name = "SH7751_IO", - .start = 0x4000, - .end = SH7751_PCI_IO_SIZE - 1, - .flags = IORESOURCE_IO -}; - -static struct resource sh7751_mem_resource = { - .name = "SH7751_mem", - .start = SH7751_PCI_MEMORY_BASE, - .end = SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1, - .flags = IORESOURCE_MEM -}; - -extern struct pci_ops sh7751_pci_ops; - -struct pci_channel board_pci_channels[] = { - { sh7751_pci_init, &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff }, - { NULL, NULL, NULL, 0, 0 }, -}; - -static struct sh4_pci_address_map sh7751_pci_map = { - .window0 = { - .base = SH7751_CS3_BASE_ADDR, - .size = 0x04000000, - }, -}; - -int __init pcibios_init_platform(void) -{ - return sh7751_pcic_init(&board_pci_channels[0], &sh7751_pci_map); -} - diff --git a/arch/sh/drivers/pci/ops-sh03.c b/arch/sh/drivers/pci/ops-sh03.c deleted file mode 100644 index 0218135f0bb..00000000000 --- a/arch/sh/drivers/pci/ops-sh03.c +++ /dev/null @@ -1,45 +0,0 @@ -/* - * linux/arch/sh/drivers/pci/ops-sh03.c - * - * PCI initialization for the Interface CTP/PCI-SH03 board - */ - -#include -#include -#include -#include -#include -#include -#include "pci-sh7751.h" - -/* - * Description: This function sets up and initializes the pcic, sets - * up the BARS, maps the DRAM into the address space etc, etc. - */ -int __init pcibios_init_platform(void) -{ - __set_io_port_base(SH7751_PCI_IO_BASE); - return 1; -} - -static struct resource sh7751_io_resource = { - .name = "SH03 IO", - .start = SH7751_PCI_IO_BASE, - .end = SH7751_PCI_IO_BASE + SH7751_PCI_IO_SIZE - 1, - .flags = IORESOURCE_IO -}; - -static struct resource sh7751_mem_resource = { - .name = "SH03 mem", - .start = SH7751_PCI_MEMORY_BASE, - .end = SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1, - .flags = IORESOURCE_MEM -}; - -extern struct pci_ops sh4_pci_ops; - -struct pci_channel board_pci_channels[] = { - { sh7751_pci_init, &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff }, - { NULL, NULL, NULL, 0, 0 }, -}; - diff --git a/arch/sh/drivers/pci/ops-snapgear.c b/arch/sh/drivers/pci/ops-snapgear.c index b64f2b91be8..5a39ecc1adb 100644 --- a/arch/sh/drivers/pci/ops-snapgear.c +++ b/arch/sh/drivers/pci/ops-snapgear.c @@ -18,55 +18,6 @@ #include #include "pci-sh4.h" -#define SNAPGEAR_PCI_IO 0x4000 -#define SNAPGEAR_PCI_MEM 0xfd000000 - -/* PCI: default LOCAL memory window sizes (seen from PCI bus) */ -#define SNAPGEAR_LSR0_SIZE (64*(1<<20)) //64MB -#define SNAPGEAR_LSR1_SIZE (64*(1<<20)) //64MB - -static struct resource sh7751_io_resource = { - .name = "SH7751 IO", - .start = SNAPGEAR_PCI_IO, - .end = SNAPGEAR_PCI_IO + (64*1024) - 1, /* 64KiB I/O */ - .flags = IORESOURCE_IO, -}; - -static struct resource sh7751_mem_resource = { - .name = "SH7751 mem", - .start = SNAPGEAR_PCI_MEM, - .end = SNAPGEAR_PCI_MEM + (64*1024*1024) - 1, /* 64MiB mem */ - .flags = IORESOURCE_MEM, -}; - -struct pci_channel board_pci_channels[] = { - { sh7751_pci_init, &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff }, - { 0, } -}; - -static struct sh4_pci_address_map sh7751_pci_map = { - .window0 = { - .base = SH7751_CS2_BASE_ADDR, - .size = SNAPGEAR_LSR0_SIZE, - }, - - .window1 = { - .base = SH7751_CS2_BASE_ADDR, - .size = SNAPGEAR_LSR1_SIZE, - }, -}; - -/* - * Initialize the SnapGear PCI interface - * Setup hardware to be Central Funtion - * Copy the BSR regs to the PCI interface - * Setup PCI windows into local RAM - */ -int __init pcibios_init_platform(void) -{ - return sh7751_pcic_init(&board_pci_channels[0], &sh7751_pci_map); -} - int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) { int irq = -1; diff --git a/arch/sh/drivers/pci/ops-titan.c b/arch/sh/drivers/pci/ops-titan.c index e45bb62bf8c..3a79fa8254a 100644 --- a/arch/sh/drivers/pci/ops-titan.c +++ b/arch/sh/drivers/pci/ops-titan.c @@ -36,39 +36,3 @@ int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) return irq; } - -static struct resource sh7751_io_resource = { - .name = "SH7751_IO", - .start = SH7751_PCI_IO_BASE, - .end = SH7751_PCI_IO_BASE + SH7751_PCI_IO_SIZE - 1, - .flags = IORESOURCE_IO -}; - -static struct resource sh7751_mem_resource = { - .name = "SH7751_mem", - .start = SH7751_PCI_MEMORY_BASE, - .end = SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1, - .flags = IORESOURCE_MEM -}; - -struct pci_channel board_pci_channels[] = { - { sh7751_pci_init, &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff }, - { NULL, NULL, NULL, 0, 0 }, -}; - -static struct sh4_pci_address_map sh7751_pci_map = { - .window0 = { - .base = SH7751_CS2_BASE_ADDR, - .size = SH7751_MEM_REGION_SIZE*2, /* cs2 and cs3 */ - }, - - .window1 = { - .base = SH7751_CS2_BASE_ADDR, - .size = SH7751_MEM_REGION_SIZE*2, - }, -}; - -int __init pcibios_init_platform(void) -{ - return sh7751_pcic_init(&board_pci_channels[0], &sh7751_pci_map); -} diff --git a/arch/sh/drivers/pci/pci-sh7751.c b/arch/sh/drivers/pci/pci-sh7751.c index 4c08fd7f665..c4fa0bb1397 100644 --- a/arch/sh/drivers/pci/pci-sh7751.c +++ b/arch/sh/drivers/pci/pci-sh7751.c @@ -1,78 +1,41 @@ /* - * Low-Level PCI Support for the SH7751 + * Low-Level PCI Support for the SH7751 * - * Dustin McIntire (dustin@sensoria.com) - * Derived from arch/i386/kernel/pci-*.c which bore the message: - * (c) 1999--2000 Martin Mares + * Copyright (C) 2003 - 2009 Paul Mundt + * Copyright (C) 2001 Dustin McIntire * - * Ported to the new API by Paul Mundt - * With cleanup by Paul van Gool - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. + * With cleanup by Paul van Gool , 2003. * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. */ -#undef DEBUG - #include #include #include #include -#include +#include #include "pci-sh4.h" #include -#include - -/* - * Initialization. Try all known PCI access methods. Note that we support - * using both PCI BIOS and direct access: in such cases, we use I/O ports - * to access config space. - * - * Note that the platform specific initialization (BSC registers, and memory - * space mapping) will be called via the platform defined function - * pcibios_init_platform(). - */ -int __init sh7751_pci_init(struct pci_channel *chan) -{ - unsigned int id; - int ret; - - pr_debug("PCI: Starting intialization.\n"); - - chan->reg_base = 0xfe200000; - - /* check for SH7751/SH7751R hardware */ - id = pci_read_reg(chan, SH7751_PCICONF0); - if (id != ((SH7751_DEVICE_ID << 16) | SH7751_VENDOR_ID) && - id != ((SH7751R_DEVICE_ID << 16) | SH7751_VENDOR_ID)) { - pr_debug("PCI: This is not an SH7751(R) (%x)\n", id); - return -ENODEV; - } - - if ((ret = sh4_pci_check_direct(chan)) != 0) - return ret; - - return pcibios_init_platform(); -} static int __init __area_sdram_check(struct pci_channel *chan, unsigned int area) { - u32 word; + unsigned long word; - word = ctrl_inl(SH7751_BCR1); + word = __raw_readl(SH7751_BCR1); /* check BCR for SDRAM in area */ if (((word >> area) & 1) == 0) { - printk("PCI: Area %d is not configured for SDRAM. BCR1=0x%x\n", + printk("PCI: Area %d is not configured for SDRAM. BCR1=0x%lx\n", area, word); return 0; } pci_write_reg(chan, word, SH4_PCIBCR1); - word = (u16)ctrl_inw(SH7751_BCR2); + word = __raw_readw(SH7751_BCR2); /* check BCR2 for 32bit SDRAM interface*/ if (((word >> (area << 1)) & 0x3) != 0x3) { - printk("PCI: Area %d is not 32 bit SDRAM. BCR2=0x%x\n", + printk("PCI: Area %d is not 32 bit SDRAM. BCR2=0x%lx\n", area, word); return 0; } @@ -81,11 +44,56 @@ static int __init __area_sdram_check(struct pci_channel *chan, return 1; } -int __init sh7751_pcic_init(struct pci_channel *chan, - struct sh4_pci_address_map *map) +static struct resource sh7751_io_resource = { + .name = "SH7751_IO", + .start = SH7751_PCI_IO_BASE, + .end = SH7751_PCI_IO_BASE + SH7751_PCI_IO_SIZE - 1, + .flags = IORESOURCE_IO +}; + +static struct resource sh7751_mem_resource = { + .name = "SH7785_mem", + .start = SH7751_PCI_MEMORY_BASE, + .end = SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1, + .flags = IORESOURCE_MEM +}; + +static struct pci_channel sh7751_pci_controller = { + .pci_ops = &sh4_pci_ops, + .mem_resource = &sh7751_mem_resource, + .mem_offset = 0x00000000, + .io_resource = &sh7751_io_resource, + .io_offset = 0x00000000, +}; + +static struct sh4_pci_address_map sh7751_pci_map = { + .window0 = { + .base = SH7751_CS3_BASE_ADDR, + .size = 0x04000000, + }, +}; + +static int __init sh7751_pci_init(void) { - u32 reg; - u32 word; + struct pci_channel *chan = &sh7751_pci_controller; + unsigned int id; + u32 word, reg; + int ret; + + printk(KERN_NOTICE "PCI: Starting intialization.\n"); + + chan->reg_base = 0xfe200000; + + /* check for SH7751/SH7751R hardware */ + id = pci_read_reg(chan, SH7751_PCICONF0); + if (id != ((SH7751_DEVICE_ID << 16) | SH7751_VENDOR_ID) && + id != ((SH7751R_DEVICE_ID << 16) | SH7751_VENDOR_ID)) { + pr_debug("PCI: This is not an SH7751(R) (%x)\n", id); + return -ENODEV; + } + + if ((ret = sh4_pci_check_direct(chan)) != 0) + return ret; /* Set the BCR's to enable PCI access */ reg = ctrl_inl(SH7751_BCR1); @@ -112,21 +120,13 @@ int __init sh7751_pcic_init(struct pci_channel *chan, /* Set IO and Mem windows to local address * Make PCI and local address the same for easy 1 to 1 mapping - * Window0 = map->window0.size @ non-cached area base = SDRAM - * Window1 = map->window1.size @ cached area base = SDRAM */ - word = map->window0.size - 1; + word = sh7751_pci_map.window0.size - 1; pci_write_reg(chan, word, SH4_PCILSR0); - word = map->window1.size - 1; - pci_write_reg(chan, word, SH4_PCILSR1); /* Set the values on window 0 PCI config registers */ - word = P2SEGADDR(map->window0.base); + word = P2SEGADDR(sh7751_pci_map.window0.base); pci_write_reg(chan, word, SH4_PCILAR0); pci_write_reg(chan, word, SH7751_PCICONF5); - /* Set the values on window 1 PCI config registers */ - word = PHYSADDR(map->window1.base); - pci_write_reg(chan, word, SH4_PCILAR1); - pci_write_reg(chan, word, SH7751_PCICONF6); /* Set the local 16MB PCI memory space window to * the lowest PCI mapped address @@ -144,7 +144,7 @@ int __init sh7751_pcic_init(struct pci_channel *chan, /* Set PCI WCRx, BCRx's, copy from BSC locations */ /* check BCR for SDRAM in specified area */ - switch (map->window0.base) { + switch (sh7751_pci_map.window0.base) { case SH7751_CS0_BASE_ADDR: word = __area_sdram_check(chan, 0); break; case SH7751_CS1_BASE_ADDR: word = __area_sdram_check(chan, 1); break; case SH7751_CS2_BASE_ADDR: word = __area_sdram_check(chan, 2); break; @@ -179,5 +179,10 @@ int __init sh7751_pcic_init(struct pci_channel *chan, word = SH4_PCICR_PREFIX | SH4_PCICR_CFIN | SH4_PCICR_ARBM; pci_write_reg(chan, word, SH4_PCICR); + __set_io_port_base(SH7751_PCI_IO_BASE); + + register_pci_controller(chan); + return 0; } +arch_initcall(sh7751_pci_init); diff --git a/arch/sh/drivers/pci/pci-sh7751.h b/arch/sh/drivers/pci/pci-sh7751.h index c390dd2f5e1..4983a4d2035 100644 --- a/arch/sh/drivers/pci/pci-sh7751.h +++ b/arch/sh/drivers/pci/pci-sh7751.h @@ -57,7 +57,7 @@ #define SH7751_PCICONF2_SCC 0x00FF0000 /* Sub-Class Code */ #define SH7751_PCICONF2_RLPI 0x0000FF00 /* Programming Interface */ #define SH7751_PCICONF2_REV 0x000000FF /* Revision ID */ -#define SH7751_PCICONF3 0xC /* PCI Config Reg 3 */ +#define SH7751_PCICONF3 0xC /* PCI Config Reg 3 */ #define SH7751_PCICONF3_BIST7 0x80000000 /* Bist Supported */ #define SH7751_PCICONF3_BIST6 0x40000000 /* Bist Executing */ #define SH7751_PCICONF3_BIST3_0 0x0F000000 /* Bist Passed */ @@ -72,12 +72,12 @@ #define SH7751_PCICONF5_BASE 0xFFFFFFF0 /* Mem Space Base Addr */ #define SH7751_PCICONF5_LAP 0x00000008 /* Prefetch Enabled */ #define SH7751_PCICONF5_LAT 0x00000006 /* Local Memory type */ - #define SH7751_PCICONF5_ASI 0x00000001 /* Address Space Type */ + #define SH7751_PCICONF5_ASI 0x00000001 /* Address Space Type */ #define SH7751_PCICONF6 0x18 /* PCI Config Reg 6 */ #define SH7751_PCICONF6_BASE 0xFFFFFFF0 /* Mem Space Base Addr */ #define SH7751_PCICONF6_LAP 0x00000008 /* Prefetch Enabled */ #define SH7751_PCICONF6_LAT 0x00000006 /* Local Memory type */ - #define SH7751_PCICONF6_ASI 0x00000001 /* Address Space Type */ + #define SH7751_PCICONF6_ASI 0x00000001 /* Address Space Type */ /* PCICONF7 - PCICONF10 are undefined */ #define SH7751_PCICONF11 0x2C /* PCI Config Reg 11 */ #define SH7751_PCICONF11_SSID 0xFFFF0000 /* Subsystem ID */ @@ -126,11 +126,4 @@ #define SH7751_CS5_BASE_ADDR (SH7751_CS4_BASE_ADDR + SH7751_MEM_REGION_SIZE) #define SH7751_CS6_BASE_ADDR (SH7751_CS5_BASE_ADDR + SH7751_MEM_REGION_SIZE) -struct sh4_pci_address_map; - -/* arch/sh/drivers/pci/pci-sh7751.c */ -int sh7751_pci_init(struct pci_channel *chan); -int sh7751_pcic_init(struct pci_channel *chan, - struct sh4_pci_address_map *map); - #endif /* _PCI_SH7751_H_ */ -- cgit v1.2.3 From 84972ec0c206b73ffb74e5114b574186ce6166b8 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 20 Apr 2009 21:17:10 +0900 Subject: sh: pci: Rename SH7751 platform ops files to fixups. None of these contain pci_ops, only IRQ routing bits, rename them accordingly. Signed-off-by: Paul Mundt --- arch/sh/drivers/pci/Makefile | 8 ++++---- arch/sh/drivers/pci/fixups-landisk.c | 34 +++++++++++++++++++++++++++++++ arch/sh/drivers/pci/fixups-lboxre2.c | 23 +++++++++++++++++++++ arch/sh/drivers/pci/fixups-snapgear.c | 38 +++++++++++++++++++++++++++++++++++ arch/sh/drivers/pci/fixups-titan.c | 38 +++++++++++++++++++++++++++++++++++ arch/sh/drivers/pci/ops-landisk.c | 34 ------------------------------- arch/sh/drivers/pci/ops-lboxre2.c | 23 --------------------- arch/sh/drivers/pci/ops-snapgear.c | 38 ----------------------------------- arch/sh/drivers/pci/ops-titan.c | 38 ----------------------------------- 9 files changed, 137 insertions(+), 137 deletions(-) create mode 100644 arch/sh/drivers/pci/fixups-landisk.c create mode 100644 arch/sh/drivers/pci/fixups-lboxre2.c create mode 100644 arch/sh/drivers/pci/fixups-snapgear.c create mode 100644 arch/sh/drivers/pci/fixups-titan.c delete mode 100644 arch/sh/drivers/pci/ops-landisk.c delete mode 100644 arch/sh/drivers/pci/ops-lboxre2.c delete mode 100644 arch/sh/drivers/pci/ops-snapgear.c delete mode 100644 arch/sh/drivers/pci/ops-titan.c diff --git a/arch/sh/drivers/pci/Makefile b/arch/sh/drivers/pci/Makefile index b8667de19ec..abd931c1496 100644 --- a/arch/sh/drivers/pci/Makefile +++ b/arch/sh/drivers/pci/Makefile @@ -14,14 +14,14 @@ obj-$(CONFIG_CPU_SH5) += pci-sh5.o ops-sh5.o obj-$(CONFIG_SH_DREAMCAST) += ops-dreamcast.o fixups-dreamcast.o \ pci-dreamcast.o -obj-$(CONFIG_SH_SECUREEDGE5410) += ops-snapgear.o +obj-$(CONFIG_SH_SECUREEDGE5410) += fixups-snapgear.o obj-$(CONFIG_SH_RTS7751R2D) += ops-rts7751r2d.o fixups-rts7751r2d.o obj-$(CONFIG_SH_SH03) += fixups-sh03.o obj-$(CONFIG_SH_HIGHLANDER) += fixups-r7780rp.o obj-$(CONFIG_SH_SH7785LCR) += fixups-r7780rp.o obj-$(CONFIG_SH_SDK7780) += fixups-sdk7780.o obj-$(CONFIG_SH_7780_SOLUTION_ENGINE) += fixups-sdk7780.o -obj-$(CONFIG_SH_TITAN) += ops-titan.o -obj-$(CONFIG_SH_LANDISK) += ops-landisk.o -obj-$(CONFIG_SH_LBOX_RE2) += ops-lboxre2.o fixups-rts7751r2d.o +obj-$(CONFIG_SH_TITAN) += fixups-titan.o +obj-$(CONFIG_SH_LANDISK) += fixups-landisk.o +obj-$(CONFIG_SH_LBOX_RE2) += fixups-lboxre2.o fixups-rts7751r2d.o obj-$(CONFIG_SH_CAYMAN) += fixups-cayman.o diff --git a/arch/sh/drivers/pci/fixups-landisk.c b/arch/sh/drivers/pci/fixups-landisk.c new file mode 100644 index 00000000000..bb1a6bb5149 --- /dev/null +++ b/arch/sh/drivers/pci/fixups-landisk.c @@ -0,0 +1,34 @@ +/* + * arch/sh/drivers/pci/ops-landisk.c + * + * PCI initialization for the I-O DATA Device, Inc. LANDISK board + * + * Copyright (C) 2006 kogiidena + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + */ +#include +#include +#include +#include +#include +#include "pci-sh4.h" + +int pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) +{ + /* + * slot0: pin1-4 = irq5,6,7,8 + * slot1: pin1-4 = irq6,7,8,5 + * slot2: pin1-4 = irq7,8,5,6 + * slot3: pin1-4 = irq8,5,6,7 + */ + int irq = ((slot + pin - 1) & 0x3) + 5; + + if ((slot | (pin - 1)) > 0x3) { + printk("PCI: Bad IRQ mapping request for slot %d pin %c\n", + slot, pin - 1 + 'A'); + return -1; + } + return irq; +} diff --git a/arch/sh/drivers/pci/fixups-lboxre2.c b/arch/sh/drivers/pci/fixups-lboxre2.c new file mode 100644 index 00000000000..6db2c209737 --- /dev/null +++ b/arch/sh/drivers/pci/fixups-lboxre2.c @@ -0,0 +1,23 @@ +/* + * linux/arch/sh/drivers/pci/ops-lboxre2.c + * + * Copyright (C) 2007 Nobuhiro Iwamatsu + * + * PCI initialization for the NTT COMWARE L-BOX RE2 + */ +#include +#include +#include +#include +#include +#include +#include "pci-sh4.h" + +static char lboxre2_irq_tab[] __initdata = { + IRQ_ETH0, IRQ_ETH1, IRQ_INTA, IRQ_INTD, +}; + +int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) +{ + return lboxre2_irq_tab[slot]; +} diff --git a/arch/sh/drivers/pci/fixups-snapgear.c b/arch/sh/drivers/pci/fixups-snapgear.c new file mode 100644 index 00000000000..5a39ecc1adb --- /dev/null +++ b/arch/sh/drivers/pci/fixups-snapgear.c @@ -0,0 +1,38 @@ +/* + * arch/sh/drivers/pci/ops-snapgear.c + * + * Author: David McCullough + * + * Ported to new API by Paul Mundt + * + * Highly leveraged from pci-bigsur.c, written by Dustin McIntire. + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * PCI initialization for the SnapGear boards + */ +#include +#include +#include +#include +#include "pci-sh4.h" + +int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) +{ + int irq = -1; + + switch (slot) { + case 8: /* the PCI bridge */ break; + case 11: irq = 8; break; /* USB */ + case 12: irq = 11; break; /* PCMCIA */ + case 13: irq = 5; break; /* eth0 */ + case 14: irq = 8; break; /* eth1 */ + case 15: irq = 11; break; /* safenet (unused) */ + } + + printk("PCI: Mapping SnapGear IRQ for slot %d, pin %c to irq %d\n", + slot, pin - 1 + 'A', irq); + + return irq; +} diff --git a/arch/sh/drivers/pci/fixups-titan.c b/arch/sh/drivers/pci/fixups-titan.c new file mode 100644 index 00000000000..3a79fa8254a --- /dev/null +++ b/arch/sh/drivers/pci/fixups-titan.c @@ -0,0 +1,38 @@ +/* + * arch/sh/drivers/pci/ops-titan.c + * + * Ported to new API by Paul Mundt + * + * Modified from ops-snapgear.c written by David McCullough + * Highly leveraged from pci-bigsur.c, written by Dustin McIntire. + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * PCI initialization for the Titan boards + */ +#include +#include +#include +#include +#include +#include +#include "pci-sh4.h" + +static char titan_irq_tab[] __initdata = { + TITAN_IRQ_WAN, + TITAN_IRQ_LAN, + TITAN_IRQ_MPCIA, + TITAN_IRQ_MPCIB, + TITAN_IRQ_USB, +}; + +int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) +{ + int irq = titan_irq_tab[slot]; + + printk("PCI: Mapping TITAN IRQ for slot %d, pin %c to irq %d\n", + slot, pin - 1 + 'A', irq); + + return irq; +} diff --git a/arch/sh/drivers/pci/ops-landisk.c b/arch/sh/drivers/pci/ops-landisk.c deleted file mode 100644 index bb1a6bb5149..00000000000 --- a/arch/sh/drivers/pci/ops-landisk.c +++ /dev/null @@ -1,34 +0,0 @@ -/* - * arch/sh/drivers/pci/ops-landisk.c - * - * PCI initialization for the I-O DATA Device, Inc. LANDISK board - * - * Copyright (C) 2006 kogiidena - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - */ -#include -#include -#include -#include -#include -#include "pci-sh4.h" - -int pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) -{ - /* - * slot0: pin1-4 = irq5,6,7,8 - * slot1: pin1-4 = irq6,7,8,5 - * slot2: pin1-4 = irq7,8,5,6 - * slot3: pin1-4 = irq8,5,6,7 - */ - int irq = ((slot + pin - 1) & 0x3) + 5; - - if ((slot | (pin - 1)) > 0x3) { - printk("PCI: Bad IRQ mapping request for slot %d pin %c\n", - slot, pin - 1 + 'A'); - return -1; - } - return irq; -} diff --git a/arch/sh/drivers/pci/ops-lboxre2.c b/arch/sh/drivers/pci/ops-lboxre2.c deleted file mode 100644 index 6db2c209737..00000000000 --- a/arch/sh/drivers/pci/ops-lboxre2.c +++ /dev/null @@ -1,23 +0,0 @@ -/* - * linux/arch/sh/drivers/pci/ops-lboxre2.c - * - * Copyright (C) 2007 Nobuhiro Iwamatsu - * - * PCI initialization for the NTT COMWARE L-BOX RE2 - */ -#include -#include -#include -#include -#include -#include -#include "pci-sh4.h" - -static char lboxre2_irq_tab[] __initdata = { - IRQ_ETH0, IRQ_ETH1, IRQ_INTA, IRQ_INTD, -}; - -int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) -{ - return lboxre2_irq_tab[slot]; -} diff --git a/arch/sh/drivers/pci/ops-snapgear.c b/arch/sh/drivers/pci/ops-snapgear.c deleted file mode 100644 index 5a39ecc1adb..00000000000 --- a/arch/sh/drivers/pci/ops-snapgear.c +++ /dev/null @@ -1,38 +0,0 @@ -/* - * arch/sh/drivers/pci/ops-snapgear.c - * - * Author: David McCullough - * - * Ported to new API by Paul Mundt - * - * Highly leveraged from pci-bigsur.c, written by Dustin McIntire. - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * PCI initialization for the SnapGear boards - */ -#include -#include -#include -#include -#include "pci-sh4.h" - -int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) -{ - int irq = -1; - - switch (slot) { - case 8: /* the PCI bridge */ break; - case 11: irq = 8; break; /* USB */ - case 12: irq = 11; break; /* PCMCIA */ - case 13: irq = 5; break; /* eth0 */ - case 14: irq = 8; break; /* eth1 */ - case 15: irq = 11; break; /* safenet (unused) */ - } - - printk("PCI: Mapping SnapGear IRQ for slot %d, pin %c to irq %d\n", - slot, pin - 1 + 'A', irq); - - return irq; -} diff --git a/arch/sh/drivers/pci/ops-titan.c b/arch/sh/drivers/pci/ops-titan.c deleted file mode 100644 index 3a79fa8254a..00000000000 --- a/arch/sh/drivers/pci/ops-titan.c +++ /dev/null @@ -1,38 +0,0 @@ -/* - * arch/sh/drivers/pci/ops-titan.c - * - * Ported to new API by Paul Mundt - * - * Modified from ops-snapgear.c written by David McCullough - * Highly leveraged from pci-bigsur.c, written by Dustin McIntire. - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * PCI initialization for the Titan boards - */ -#include -#include -#include -#include -#include -#include -#include "pci-sh4.h" - -static char titan_irq_tab[] __initdata = { - TITAN_IRQ_WAN, - TITAN_IRQ_LAN, - TITAN_IRQ_MPCIA, - TITAN_IRQ_MPCIB, - TITAN_IRQ_USB, -}; - -int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) -{ - int irq = titan_irq_tab[slot]; - - printk("PCI: Mapping TITAN IRQ for slot %d, pin %c to irq %d\n", - slot, pin - 1 + 'A', irq); - - return irq; -} -- cgit v1.2.3 From 37c8ac361efdbae969eff1a603bc39412d3e873f Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 20 Apr 2009 21:27:15 +0900 Subject: sh: pci: Consolidate lboxre2 and r2d IRQ fixups. Signed-off-by: Paul Mundt --- arch/sh/drivers/pci/Makefile | 4 ++-- arch/sh/drivers/pci/fixups-lboxre2.c | 23 ----------------------- arch/sh/drivers/pci/fixups-rts7751r2d.c | 25 ++++++++++++++++++++++++- arch/sh/drivers/pci/ops-rts7751r2d.c | 31 ------------------------------- 4 files changed, 26 insertions(+), 57 deletions(-) delete mode 100644 arch/sh/drivers/pci/fixups-lboxre2.c delete mode 100644 arch/sh/drivers/pci/ops-rts7751r2d.c diff --git a/arch/sh/drivers/pci/Makefile b/arch/sh/drivers/pci/Makefile index abd931c1496..fbebd73b22f 100644 --- a/arch/sh/drivers/pci/Makefile +++ b/arch/sh/drivers/pci/Makefile @@ -15,7 +15,7 @@ obj-$(CONFIG_CPU_SH5) += pci-sh5.o ops-sh5.o obj-$(CONFIG_SH_DREAMCAST) += ops-dreamcast.o fixups-dreamcast.o \ pci-dreamcast.o obj-$(CONFIG_SH_SECUREEDGE5410) += fixups-snapgear.o -obj-$(CONFIG_SH_RTS7751R2D) += ops-rts7751r2d.o fixups-rts7751r2d.o +obj-$(CONFIG_SH_RTS7751R2D) += fixups-rts7751r2d.o obj-$(CONFIG_SH_SH03) += fixups-sh03.o obj-$(CONFIG_SH_HIGHLANDER) += fixups-r7780rp.o obj-$(CONFIG_SH_SH7785LCR) += fixups-r7780rp.o @@ -23,5 +23,5 @@ obj-$(CONFIG_SH_SDK7780) += fixups-sdk7780.o obj-$(CONFIG_SH_7780_SOLUTION_ENGINE) += fixups-sdk7780.o obj-$(CONFIG_SH_TITAN) += fixups-titan.o obj-$(CONFIG_SH_LANDISK) += fixups-landisk.o -obj-$(CONFIG_SH_LBOX_RE2) += fixups-lboxre2.o fixups-rts7751r2d.o +obj-$(CONFIG_SH_LBOX_RE2) += fixups-rts7751r2d.o obj-$(CONFIG_SH_CAYMAN) += fixups-cayman.o diff --git a/arch/sh/drivers/pci/fixups-lboxre2.c b/arch/sh/drivers/pci/fixups-lboxre2.c deleted file mode 100644 index 6db2c209737..00000000000 --- a/arch/sh/drivers/pci/fixups-lboxre2.c +++ /dev/null @@ -1,23 +0,0 @@ -/* - * linux/arch/sh/drivers/pci/ops-lboxre2.c - * - * Copyright (C) 2007 Nobuhiro Iwamatsu - * - * PCI initialization for the NTT COMWARE L-BOX RE2 - */ -#include -#include -#include -#include -#include -#include -#include "pci-sh4.h" - -static char lboxre2_irq_tab[] __initdata = { - IRQ_ETH0, IRQ_ETH1, IRQ_INTA, IRQ_INTD, -}; - -int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) -{ - return lboxre2_irq_tab[slot]; -} diff --git a/arch/sh/drivers/pci/fixups-rts7751r2d.c b/arch/sh/drivers/pci/fixups-rts7751r2d.c index 38852334d47..052b354236d 100644 --- a/arch/sh/drivers/pci/fixups-rts7751r2d.c +++ b/arch/sh/drivers/pci/fixups-rts7751r2d.c @@ -1,21 +1,44 @@ /* * arch/sh/drivers/pci/fixups-rts7751r2d.c * - * RTS7751R2D PCI fixups + * RTS7751R2D / LBOXRE2 PCI fixups * * Copyright (C) 2003 Lineo uSolutions, Inc. * Copyright (C) 2004 Paul Mundt + * Copyright (C) 2007 Nobuhiro Iwamatsu * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive * for more details. */ #include +#include +#include #include "pci-sh4.h" +#include #define PCIMCR_MRSET_OFF 0xBFFFFFFF #define PCIMCR_RFSH_OFF 0xFFFFFFFB +static u8 rts7751r2d_irq_tab[] __initdata = { + IRQ_PCI_INTA, + IRQ_PCI_INTB, + IRQ_PCI_INTC, + IRQ_PCI_INTD, +}; + +static char lboxre2_irq_tab[] __initdata = { + IRQ_ETH0, IRQ_ETH1, IRQ_INTA, IRQ_INTD, +}; + +int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) +{ + if (mach_is_lboxre2()) + return lboxre2_irq_tab[slot]; + else + return rts7751r2d_irq_tab[slot]; +} + int pci_fixup_pcic(struct pci_channel *chan) { unsigned long bcr1, mcr; diff --git a/arch/sh/drivers/pci/ops-rts7751r2d.c b/arch/sh/drivers/pci/ops-rts7751r2d.c deleted file mode 100644 index d950b8ab25f..00000000000 --- a/arch/sh/drivers/pci/ops-rts7751r2d.c +++ /dev/null @@ -1,31 +0,0 @@ -/* - * linux/arch/sh/drivers/pci/ops-rts7751r2d.c - * - * Author: Ian DaSilva (idasilva@mvista.com) - * - * Highly leveraged from pci-bigsur.c, written by Dustin McIntire. - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * PCI initialization for the Renesas SH7751R RTS7751R2D board - */ -#include -#include -#include -#include -#include -#include -#include "pci-sh4.h" - -static u8 rts7751r2d_irq_tab[] __initdata = { - IRQ_PCI_INTA, - IRQ_PCI_INTB, - IRQ_PCI_INTC, - IRQ_PCI_INTD, -}; - -int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) -{ - return rts7751r2d_irq_tab[slot]; -} -- cgit v1.2.3 From 951a681bda844491de8699b3bdc6c3899cbd4c9f Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 20 Apr 2009 21:34:36 +0900 Subject: sh: pci: Convert dreamcast to new-style interface. Signed-off-by: Paul Mundt --- arch/sh/drivers/pci/Kconfig | 5 +---- arch/sh/drivers/pci/fixups-dreamcast.c | 2 +- arch/sh/drivers/pci/pci-dreamcast.c | 27 ++++++++++++--------------- 3 files changed, 14 insertions(+), 20 deletions(-) diff --git a/arch/sh/drivers/pci/Kconfig b/arch/sh/drivers/pci/Kconfig index 5aaee3c707b..1d53496b149 100644 --- a/arch/sh/drivers/pci/Kconfig +++ b/arch/sh/drivers/pci/Kconfig @@ -20,11 +20,8 @@ config SH_PCIDMA_NONCOHERENT # Temporary config option for transitioning off of PCI_AUTO config PCI_NEW - bool + def_bool y depends on PCI - default y if CPU_SUBTYPE_SH7763 || CPU_SUBTYPE_SH7780 || \ - CPU_SUBTYPE_SH7785 || CPU_SH5 || \ - CPU_SUBTYPE_SH7751 || CPU_SUBTYPE_SH7751R # This is also board-specific config PCI_AUTO diff --git a/arch/sh/drivers/pci/fixups-dreamcast.c b/arch/sh/drivers/pci/fixups-dreamcast.c index 48c6381fffa..ed7f489936f 100644 --- a/arch/sh/drivers/pci/fixups-dreamcast.c +++ b/arch/sh/drivers/pci/fixups-dreamcast.c @@ -30,7 +30,7 @@ static void __init gapspci_fixup_resources(struct pci_dev *dev) { - struct pci_channel *p = board_pci_channels; + struct pci_channel *p = dev->sysdata; printk(KERN_NOTICE "PCI: Fixing up device %s\n", pci_name(dev)); diff --git a/arch/sh/drivers/pci/pci-dreamcast.c b/arch/sh/drivers/pci/pci-dreamcast.c index 0897be5053d..210f9d4af14 100644 --- a/arch/sh/drivers/pci/pci-dreamcast.c +++ b/arch/sh/drivers/pci/pci-dreamcast.c @@ -21,7 +21,6 @@ #include #include #include - #include #include #include @@ -40,11 +39,19 @@ static struct resource gapspci_mem_resource = { .flags = IORESOURCE_MEM, }; +static struct pci_channel dreamcast_pci_controller = { + .pci_ops = &gapspci_pci_ops, + .io_resource = &gapspci_io_resource, + .io_offset = 0x00000000, + .mem_resource = &gapspci_mem_resource, + .mem_offset = 0x00000000, +}; + /* * gapspci init */ -static int __init gapspci_init(struct pci_channel *chan) +static int __init gapspci_init(void) { char idbuf[16]; int i; @@ -88,18 +95,8 @@ static int __init gapspci_init(struct pci_channel *chan) outl(0x00002001, GAPSPCI_BBA_CONFIG+0x10); outl(0x01000000, GAPSPCI_BBA_CONFIG+0x14); + register_pci_controller(&dreamcast_pci_controller); + return 0; } - -struct pci_channel board_pci_channels[] = { - { - .init = gapspci_init, - .pci_ops = &gapspci_pci_ops, - .io_resource = &gapspci_io_resource, - .mem_resource = &gapspci_mem_resource, - .first_devfn = 0, - .last_devfn = 1, - }, { - .init = NULL, - } -}; +arch_initcall(gapspci_init); -- cgit v1.2.3 From 2d5efc190eb415dbff79ffab4f8ea731ab0288a9 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 20 Apr 2009 21:42:59 +0900 Subject: sh: pci: Move the se7751 fixups in to arch/sh/drivers/pci/. The se7751 was still doing the PCI fixups in its own board directory, so we move it over to arch/sh/drivers/pci/ with the rest of the board fixups. It has bitrotted significantly over the years, so will still likely need a bit of work to bring back up to date. Signed-off-by: Paul Mundt --- arch/sh/boards/mach-se/7751/Makefile | 2 - arch/sh/boards/mach-se/7751/pci.c | 150 ----------------------------------- arch/sh/drivers/pci/Makefile | 1 + arch/sh/drivers/pci/fixups-se7751.c | 111 ++++++++++++++++++++++++++ 4 files changed, 112 insertions(+), 152 deletions(-) delete mode 100644 arch/sh/boards/mach-se/7751/pci.c create mode 100644 arch/sh/drivers/pci/fixups-se7751.c diff --git a/arch/sh/boards/mach-se/7751/Makefile b/arch/sh/boards/mach-se/7751/Makefile index dbc29f3a9de..e6f4341bfe6 100644 --- a/arch/sh/boards/mach-se/7751/Makefile +++ b/arch/sh/boards/mach-se/7751/Makefile @@ -3,5 +3,3 @@ # obj-y := setup.o io.o irq.o - -obj-$(CONFIG_PCI) += pci.o diff --git a/arch/sh/boards/mach-se/7751/pci.c b/arch/sh/boards/mach-se/7751/pci.c deleted file mode 100644 index 9ec64a416b3..00000000000 --- a/arch/sh/boards/mach-se/7751/pci.c +++ /dev/null @@ -1,150 +0,0 @@ -/* - * linux/arch/sh/boards/se/7751/pci.c - * - * Author: Ian DaSilva (idasilva@mvista.com) - * - * Highly leveraged from pci-bigsur.c, written by Dustin McIntire. - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * PCI initialization for the Hitachi SH7751 Solution Engine board (MS7751SE01) - */ - -#include -#include -#include -#include -#include - -#include -#include "../../../drivers/pci/pci-sh7751.h" - -#define PCIMCR_MRSET_OFF 0xBFFFFFFF -#define PCIMCR_RFSH_OFF 0xFFFFFFFB - -/* - * Only long word accesses of the PCIC's internal local registers and the - * configuration registers from the CPU is supported. - */ -#define PCIC_WRITE(x,v) writel((v), PCI_REG(x)) -#define PCIC_READ(x) readl(PCI_REG(x)) - -#define xPCIBIOS_MIN_IO board_pci_channels->io_resource->start -#define xPCIBIOS_MIN_MEM board_pci_channels->mem_resource->start - -/* - * Description: This function sets up and initializes the pcic, sets - * up the BARS, maps the DRAM into the address space etc, etc. - */ -int __init pcibios_init_platform(void) -{ - unsigned long bcr1, wcr1, wcr2, wcr3, mcr; - unsigned short bcr2; - - /* - * Initialize the slave bus controller on the pcic. The values used - * here should not be hardcoded, but they should be taken from the bsc - * on the processor, to make this function as generic as possible. - * (i.e. Another sbc may usr different SDRAM timing settings -- in order - * for the pcic to work, its settings need to be exactly the same.) - */ - bcr1 = (*(volatile unsigned long*)(SH7751_BCR1)); - bcr2 = (*(volatile unsigned short*)(SH7751_BCR2)); - wcr1 = (*(volatile unsigned long*)(SH7751_WCR1)); - wcr2 = (*(volatile unsigned long*)(SH7751_WCR2)); - wcr3 = (*(volatile unsigned long*)(SH7751_WCR3)); - mcr = (*(volatile unsigned long*)(SH7751_MCR)); - - bcr1 = bcr1 | 0x00080000; /* Enable Bit 19, BREQEN */ - (*(volatile unsigned long*)(SH7751_BCR1)) = bcr1; - - bcr1 = bcr1 | 0x40080000; /* Enable Bit 19 BREQEN, set PCIC to slave */ - PCIC_WRITE(SH7751_PCIBCR1, bcr1); /* PCIC BCR1 */ - PCIC_WRITE(SH7751_PCIBCR2, bcr2); /* PCIC BCR2 */ - PCIC_WRITE(SH7751_PCIWCR1, wcr1); /* PCIC WCR1 */ - PCIC_WRITE(SH7751_PCIWCR2, wcr2); /* PCIC WCR2 */ - PCIC_WRITE(SH7751_PCIWCR3, wcr3); /* PCIC WCR3 */ - mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF; - PCIC_WRITE(SH7751_PCIMCR, mcr); /* PCIC MCR */ - - - /* Enable all interrupts, so we know what to fix */ - PCIC_WRITE(SH7751_PCIINTM, 0x0000c3ff); - PCIC_WRITE(SH7751_PCIAINTM, 0x0000380f); - - /* Set up standard PCI config registers */ - PCIC_WRITE(SH7751_PCICONF1, 0xF39000C7); /* Bus Master, Mem & I/O access */ - PCIC_WRITE(SH7751_PCICONF2, 0x00000000); /* PCI Class code & Revision ID */ - PCIC_WRITE(SH7751_PCICONF4, 0xab000001); /* PCI I/O address (local regs) */ - PCIC_WRITE(SH7751_PCICONF5, 0x0c000000); /* PCI MEM address (local RAM) */ - PCIC_WRITE(SH7751_PCICONF6, 0xd0000000); /* PCI MEM address (unused) */ - PCIC_WRITE(SH7751_PCICONF11, 0x35051054); /* PCI Subsystem ID & Vendor ID */ - PCIC_WRITE(SH7751_PCILSR0, 0x03f00000); /* MEM (full 64M exposed) */ - PCIC_WRITE(SH7751_PCILSR1, 0x00000000); /* MEM (unused) */ - PCIC_WRITE(SH7751_PCILAR0, 0x0c000000); /* MEM (direct map from PCI) */ - PCIC_WRITE(SH7751_PCILAR1, 0x00000000); /* MEM (unused) */ - - /* Now turn it on... */ - PCIC_WRITE(SH7751_PCICR, 0xa5000001); - - /* - * Set PCIMBR and PCIIOBR here, assuming a single window - * (16M MEM, 256K IO) is enough. If a larger space is - * needed, the readx/writex and inx/outx functions will - * have to do more (e.g. setting registers for each call). - */ - - /* - * Set the MBR so PCI address is one-to-one with window, - * meaning all calls go straight through... use BUG_ON to - * catch erroneous assumption. - */ - BUG_ON(xPCIBIOS_MIN_MEM != SH7751_PCI_MEMORY_BASE); - - PCIC_WRITE(SH7751_PCIMBR, xPCIBIOS_MIN_MEM); - - /* Set IOBR for window containing area specified in pci.h */ - PCIC_WRITE(SH7751_PCIIOBR, (xPCIBIOS_MIN_IO & SH7751_PCIIOBR_MASK)); - - /* All done, may as well say so... */ - printk("SH7751 PCI: Finished initialization of the PCI controller\n"); - - return 1; -} - -int __init pcibios_map_platform_irq(u8 slot, u8 pin) -{ - switch (slot) { - case 0: return 13; - case 1: return 13; /* AMD Ethernet controller */ - case 2: return -1; - case 3: return -1; - case 4: return -1; - default: - printk("PCI: Bad IRQ mapping request for slot %d\n", slot); - return -1; - } -} - -static struct resource sh7751_io_resource = { - .name = "SH7751 IO", - .start = SH7751_PCI_IO_BASE, - .end = SH7751_PCI_IO_BASE + SH7751_PCI_IO_SIZE - 1, - .flags = IORESOURCE_IO -}; - -static struct resource sh7751_mem_resource = { - .name = "SH7751 mem", - .start = SH7751_PCI_MEMORY_BASE, - .end = SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1, - .flags = IORESOURCE_MEM -}; - -extern struct pci_ops sh7751_pci_ops; - -struct pci_channel board_pci_channels[] = { - { &sh7751_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff }, - { NULL, NULL, NULL, 0, 0 }, -}; - diff --git a/arch/sh/drivers/pci/Makefile b/arch/sh/drivers/pci/Makefile index fbebd73b22f..e388a70d146 100644 --- a/arch/sh/drivers/pci/Makefile +++ b/arch/sh/drivers/pci/Makefile @@ -15,6 +15,7 @@ obj-$(CONFIG_CPU_SH5) += pci-sh5.o ops-sh5.o obj-$(CONFIG_SH_DREAMCAST) += ops-dreamcast.o fixups-dreamcast.o \ pci-dreamcast.o obj-$(CONFIG_SH_SECUREEDGE5410) += fixups-snapgear.o +obj-$(CONFIG_SH_7751_SOLUTION_ENGINE) += fixups-se7751.o obj-$(CONFIG_SH_RTS7751R2D) += fixups-rts7751r2d.o obj-$(CONFIG_SH_SH03) += fixups-sh03.o obj-$(CONFIG_SH_HIGHLANDER) += fixups-r7780rp.o diff --git a/arch/sh/drivers/pci/fixups-se7751.c b/arch/sh/drivers/pci/fixups-se7751.c new file mode 100644 index 00000000000..475fa9f0fe2 --- /dev/null +++ b/arch/sh/drivers/pci/fixups-se7751.c @@ -0,0 +1,111 @@ +#include +#include +#include +#include +#include +#include +#include "pci-sh4.h" + +int __init pcibios_map_platform_irq(u8 slot, u8 pin) +{ + switch (slot) { + case 0: return 13; + case 1: return 13; /* AMD Ethernet controller */ + case 2: return -1; + case 3: return -1; + case 4: return -1; + default: + printk("PCI: Bad IRQ mapping request for slot %d\n", slot); + return -1; + } +} + +#define PCIMCR_MRSET_OFF 0xBFFFFFFF +#define PCIMCR_RFSH_OFF 0xFFFFFFFB + +/* + * Only long word accesses of the PCIC's internal local registers and the + * configuration registers from the CPU is supported. + */ +#define PCIC_WRITE(x,v) writel((v), PCI_REG(x)) +#define PCIC_READ(x) readl(PCI_REG(x)) + +/* + * Description: This function sets up and initializes the pcic, sets + * up the BARS, maps the DRAM into the address space etc, etc. + */ +int pci_fixup_pcic(struct pci_channel *chan) +{ + unsigned long bcr1, wcr1, wcr2, wcr3, mcr; + unsigned short bcr2; + + /* + * Initialize the slave bus controller on the pcic. The values used + * here should not be hardcoded, but they should be taken from the bsc + * on the processor, to make this function as generic as possible. + * (i.e. Another sbc may usr different SDRAM timing settings -- in order + * for the pcic to work, its settings need to be exactly the same.) + */ + bcr1 = (*(volatile unsigned long*)(SH7751_BCR1)); + bcr2 = (*(volatile unsigned short*)(SH7751_BCR2)); + wcr1 = (*(volatile unsigned long*)(SH7751_WCR1)); + wcr2 = (*(volatile unsigned long*)(SH7751_WCR2)); + wcr3 = (*(volatile unsigned long*)(SH7751_WCR3)); + mcr = (*(volatile unsigned long*)(SH7751_MCR)); + + bcr1 = bcr1 | 0x00080000; /* Enable Bit 19, BREQEN */ + (*(volatile unsigned long*)(SH7751_BCR1)) = bcr1; + + bcr1 = bcr1 | 0x40080000; /* Enable Bit 19 BREQEN, set PCIC to slave */ + PCIC_WRITE(SH7751_PCIBCR1, bcr1); /* PCIC BCR1 */ + PCIC_WRITE(SH7751_PCIBCR2, bcr2); /* PCIC BCR2 */ + PCIC_WRITE(SH7751_PCIWCR1, wcr1); /* PCIC WCR1 */ + PCIC_WRITE(SH7751_PCIWCR2, wcr2); /* PCIC WCR2 */ + PCIC_WRITE(SH7751_PCIWCR3, wcr3); /* PCIC WCR3 */ + mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF; + PCIC_WRITE(SH7751_PCIMCR, mcr); /* PCIC MCR */ + + + /* Enable all interrupts, so we know what to fix */ + PCIC_WRITE(SH7751_PCIINTM, 0x0000c3ff); + PCIC_WRITE(SH7751_PCIAINTM, 0x0000380f); + + /* Set up standard PCI config registers */ + PCIC_WRITE(SH7751_PCICONF1, 0xF39000C7); /* Bus Master, Mem & I/O access */ + PCIC_WRITE(SH7751_PCICONF2, 0x00000000); /* PCI Class code & Revision ID */ + PCIC_WRITE(SH7751_PCICONF4, 0xab000001); /* PCI I/O address (local regs) */ + PCIC_WRITE(SH7751_PCICONF5, 0x0c000000); /* PCI MEM address (local RAM) */ + PCIC_WRITE(SH7751_PCICONF6, 0xd0000000); /* PCI MEM address (unused) */ + PCIC_WRITE(SH7751_PCICONF11, 0x35051054); /* PCI Subsystem ID & Vendor ID */ + PCIC_WRITE(SH7751_PCILSR0, 0x03f00000); /* MEM (full 64M exposed) */ + PCIC_WRITE(SH7751_PCILSR1, 0x00000000); /* MEM (unused) */ + PCIC_WRITE(SH7751_PCILAR0, 0x0c000000); /* MEM (direct map from PCI) */ + PCIC_WRITE(SH7751_PCILAR1, 0x00000000); /* MEM (unused) */ + + /* Now turn it on... */ + PCIC_WRITE(SH7751_PCICR, 0xa5000001); + + /* + * Set PCIMBR and PCIIOBR here, assuming a single window + * (16M MEM, 256K IO) is enough. If a larger space is + * needed, the readx/writex and inx/outx functions will + * have to do more (e.g. setting registers for each call). + */ + + /* + * Set the MBR so PCI address is one-to-one with window, + * meaning all calls go straight through... use BUG_ON to + * catch erroneous assumption. + */ + BUG_ON(chan->mem_resource->start != SH7751_PCI_MEMORY_BASE); + + PCIC_WRITE(SH7751_PCIMBR, chan->mem_resource->start); + + /* Set IOBR for window containing area specified in pci.h */ + PCIC_WRITE(SH7751_PCIIOBR, (chan->io_resource->start & SH7751_PCIIOBR_MASK)); + + /* All done, may as well say so... */ + printk("SH7751 PCI: Finished initialization of the PCI controller\n"); + + return 1; +} -- cgit v1.2.3 From 805fcc88999162b361ef0b0ce25782ef65f147d7 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 20 Apr 2009 21:46:42 +0900 Subject: sh: pci: Kill off the last remnants of the now unused pci-auto code. Signed-off-by: Paul Mundt --- arch/sh/drivers/pci/Kconfig | 18 -- arch/sh/drivers/pci/Makefile | 1 - arch/sh/drivers/pci/pci-auto.c | 546 ----------------------------------------- arch/sh/drivers/pci/pci.c | 75 ------ arch/sh/include/asm/pci.h | 16 -- 5 files changed, 656 deletions(-) delete mode 100644 arch/sh/drivers/pci/pci-auto.c delete mode 100644 arch/sh/drivers/pci/pci.c diff --git a/arch/sh/drivers/pci/Kconfig b/arch/sh/drivers/pci/Kconfig index 1d53496b149..ea903a984f0 100644 --- a/arch/sh/drivers/pci/Kconfig +++ b/arch/sh/drivers/pci/Kconfig @@ -18,24 +18,6 @@ config SH_PCIDMA_NONCOHERENT bridge integrated with your SH CPU, refer carefully to the chip specs to see if you can say 'N' here. Otherwise, leave it as 'Y'. -# Temporary config option for transitioning off of PCI_AUTO config PCI_NEW def_bool y depends on PCI - -# This is also board-specific -config PCI_AUTO - bool - depends on PCI && !PCI_NEW - default y - -config PCI_AUTO_UPDATE_RESOURCES - bool - depends on PCI_AUTO - default y if !SH_DREAMCAST - help - Selecting this option will cause the PCI auto code to leave your - BAR values alone. Otherwise they will be updated automatically. If - for some reason, you have a board that simply refuses to work - with its resources updated beyond what they are when the device - is powered up, set this to N. Everyone else will want this as Y. diff --git a/arch/sh/drivers/pci/Makefile b/arch/sh/drivers/pci/Makefile index e388a70d146..a8350ccfa9d 100644 --- a/arch/sh/drivers/pci/Makefile +++ b/arch/sh/drivers/pci/Makefile @@ -2,7 +2,6 @@ # Makefile for the PCI specific kernel interface routines under Linux. # obj-y += pci-lib.o -obj-$(CONFIG_PCI_AUTO) += pci.o pci-auto.o obj-$(CONFIG_PCI_NEW) += pci-new.o obj-$(CONFIG_CPU_SUBTYPE_SH7751) += pci-sh7751.o ops-sh4.o diff --git a/arch/sh/drivers/pci/pci-auto.c b/arch/sh/drivers/pci/pci-auto.c deleted file mode 100644 index 1d715ec405b..00000000000 --- a/arch/sh/drivers/pci/pci-auto.c +++ /dev/null @@ -1,546 +0,0 @@ -/* - * PCI autoconfiguration library - * - * Author: Matt Porter - * - * Copyright 2000, 2001 MontaVista Software Inc. - * Copyright 2001 Bradley D. LaRonde - * Copyright 2003 Paul Mundt - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -/* - * Modified for MIPS by Jun Sun, jsun@mvista.com - * - * . Simplify the interface between pci_auto and the rest: a single function. - * . Assign resources from low address to upper address. - * . change most int to u32. - * - * Further modified to include it as mips generic code, ppopov@mvista.com. - * - * 2001-10-26 Bradley D. LaRonde - * - Add a top_bus argument to the "early config" functions so that - * they can set a fake parent bus pointer to convince the underlying - * pci ops to use type 1 configuration for sub busses. - * - Set bridge base and limit registers correctly. - * - Align io and memory base properly before and after bridge setup. - * - Don't fall through to pci_setup_bars for bridge. - * - Reformat the debug output to look more like lspci's output. - * - * Cloned for SuperH by M. R. Brown, mrbrown@0xd6.org - * - * 2003-08-05 Paul Mundt - * - Don't update the BAR values on systems that already have valid addresses - * and don't want these updated for whatever reason, by way of a new config - * option check. However, we still read in the old BAR values so that they - * can still be reported through the debug output. - */ - -#include -#include -#include -#include - -#define DEBUG -#ifdef DEBUG -#define DBG(x...) printk(x) -#else -#define DBG(x...) -#endif - -/* - * These functions are used early on before PCI scanning is done - * and all of the pci_dev and pci_bus structures have been created. - */ -static struct pci_dev *fake_pci_dev(struct pci_channel *hose, - int top_bus, int busnr, int devfn) -{ - static struct pci_dev dev; - static struct pci_bus bus; - - dev.bus = &bus; - dev.sysdata = hose; - dev.devfn = devfn; - bus.number = busnr; - bus.ops = hose->pci_ops; - bus.sysdata = hose; - - if(busnr != top_bus) - /* Fake a parent bus structure. */ - bus.parent = &bus; - else - bus.parent = NULL; - - return &dev; -} - -#define EARLY_PCI_OP(rw, size, type) \ -static int early_##rw##_config_##size(struct pci_channel *hose, \ - int top_bus, int bus, int devfn, int offset, type value) \ -{ \ - return pci_##rw##_config_##size( \ - fake_pci_dev(hose, top_bus, bus, devfn), \ - offset, value); \ -} - -EARLY_PCI_OP(read, byte, u8 *) -EARLY_PCI_OP(read, word, u16 *) -EARLY_PCI_OP(read, dword, u32 *) -EARLY_PCI_OP(write, byte, u8) -EARLY_PCI_OP(write, word, u16) -EARLY_PCI_OP(write, dword, u32) - -static struct resource *io_resource_inuse; -static struct resource *mem_resource_inuse; - -static u32 pciauto_lower_iospc; -static u32 pciauto_upper_iospc; - -static u32 pciauto_lower_memspc; -static u32 pciauto_upper_memspc; - -static void __init -pciauto_setup_bars(struct pci_channel *hose, - int top_bus, - int current_bus, - int pci_devfn, - int bar_limit) -{ - u32 bar_response, bar_size, bar_value; - u32 bar, addr_mask, bar_nr = 0; - u32 * upper_limit; - u32 * lower_limit; - int found_mem64 = 0; - - for (bar = PCI_BASE_ADDRESS_0; bar <= bar_limit; bar+=4) { - u32 bar_addr; - - /* Read the old BAR value */ - early_read_config_dword(hose, top_bus, - current_bus, - pci_devfn, - bar, - &bar_addr); - - /* Tickle the BAR and get the response */ - early_write_config_dword(hose, top_bus, - current_bus, - pci_devfn, - bar, - 0xffffffff); - - early_read_config_dword(hose, top_bus, - current_bus, - pci_devfn, - bar, - &bar_response); - - /* - * Write the old BAR value back out, only update the BAR - * if we implicitly want resources to be updated, which - * is done by the generic code further down. -- PFM. - */ - early_write_config_dword(hose, top_bus, - current_bus, - pci_devfn, - bar, - bar_addr); - - /* If BAR is not implemented go to the next BAR */ - if (!bar_response) - continue; - - /* - * Workaround for a BAR that doesn't use its upper word, - * like the ALi 1535D+ PCI DC-97 Controller Modem (M5457). - * bdl - */ - if (!(bar_response & 0xffff0000)) - bar_response |= 0xffff0000; - -retry: - /* Check the BAR type and set our address mask */ - if (bar_response & PCI_BASE_ADDRESS_SPACE) { - addr_mask = PCI_BASE_ADDRESS_IO_MASK; - upper_limit = &pciauto_upper_iospc; - lower_limit = &pciauto_lower_iospc; - DBG(" I/O"); - } else { - if ((bar_response & PCI_BASE_ADDRESS_MEM_TYPE_MASK) == - PCI_BASE_ADDRESS_MEM_TYPE_64) - found_mem64 = 1; - - addr_mask = PCI_BASE_ADDRESS_MEM_MASK; - upper_limit = &pciauto_upper_memspc; - lower_limit = &pciauto_lower_memspc; - DBG(" Mem"); - } - - - /* Calculate requested size */ - bar_size = ~(bar_response & addr_mask) + 1; - - /* Allocate a base address */ - bar_value = ((*lower_limit - 1) & ~(bar_size - 1)) + bar_size; - - if ((bar_value + bar_size) > *upper_limit) { - if (bar_response & PCI_BASE_ADDRESS_SPACE) { - if (io_resource_inuse->child) { - io_resource_inuse = - io_resource_inuse->child; - pciauto_lower_iospc = - io_resource_inuse->start; - pciauto_upper_iospc = - io_resource_inuse->end + 1; - goto retry; - } - - } else { - if (mem_resource_inuse->child) { - mem_resource_inuse = - mem_resource_inuse->child; - pciauto_lower_memspc = - mem_resource_inuse->start; - pciauto_upper_memspc = - mem_resource_inuse->end + 1; - goto retry; - } - } - DBG(" unavailable -- skipping, value %x size %x\n", - bar_value, bar_size); - continue; - } - - if (bar_value < *lower_limit || (bar_value + bar_size) >= *upper_limit) { - DBG(" unavailable -- skipping, value %x size %x\n", - bar_value, bar_size); - continue; - } - -#ifdef CONFIG_PCI_AUTO_UPDATE_RESOURCES - /* Write it out and update our limit */ - early_write_config_dword(hose, top_bus, current_bus, pci_devfn, - bar, bar_value); -#endif - - *lower_limit = bar_value + bar_size; - - /* - * If we are a 64-bit decoder then increment to the - * upper 32 bits of the bar and force it to locate - * in the lower 4GB of memory. - */ - if (found_mem64) { - bar += 4; - early_write_config_dword(hose, top_bus, - current_bus, - pci_devfn, - bar, - 0x00000000); - } - - DBG(" at 0x%.8x [size=0x%x]\n", bar_value, bar_size); - - bar_nr++; - } - -} - -static void __init -pciauto_prescan_setup_bridge(struct pci_channel *hose, - int top_bus, - int current_bus, - int pci_devfn, - int sub_bus) -{ - /* Configure bus number registers */ - early_write_config_byte(hose, top_bus, current_bus, pci_devfn, - PCI_PRIMARY_BUS, current_bus); - early_write_config_byte(hose, top_bus, current_bus, pci_devfn, - PCI_SECONDARY_BUS, sub_bus + 1); - early_write_config_byte(hose, top_bus, current_bus, pci_devfn, - PCI_SUBORDINATE_BUS, 0xff); - - /* Align memory and I/O to 1MB and 4KB boundaries. */ - pciauto_lower_memspc = (pciauto_lower_memspc + (0x100000 - 1)) - & ~(0x100000 - 1); - pciauto_lower_iospc = (pciauto_lower_iospc + (0x1000 - 1)) - & ~(0x1000 - 1); - - /* Set base (lower limit) of address range behind bridge. */ - early_write_config_word(hose, top_bus, current_bus, pci_devfn, - PCI_MEMORY_BASE, pciauto_lower_memspc >> 16); - early_write_config_byte(hose, top_bus, current_bus, pci_devfn, - PCI_IO_BASE, (pciauto_lower_iospc & 0x0000f000) >> 8); - early_write_config_word(hose, top_bus, current_bus, pci_devfn, - PCI_IO_BASE_UPPER16, pciauto_lower_iospc >> 16); - - /* We don't support prefetchable memory for now, so disable */ - early_write_config_word(hose, top_bus, current_bus, pci_devfn, - PCI_PREF_MEMORY_BASE, 0); - early_write_config_word(hose, top_bus, current_bus, pci_devfn, - PCI_PREF_MEMORY_LIMIT, 0); -} - -static void __init -pciauto_postscan_setup_bridge(struct pci_channel *hose, - int top_bus, - int current_bus, - int pci_devfn, - int sub_bus) -{ - u32 temp; - - /* - * [jsun] we always bump up baselines a little, so that if there - * nothing behind P2P bridge, we don't wind up overlapping IO/MEM - * spaces. - */ - pciauto_lower_memspc += 1; - pciauto_lower_iospc += 1; - - /* Configure bus number registers */ - early_write_config_byte(hose, top_bus, current_bus, pci_devfn, - PCI_SUBORDINATE_BUS, sub_bus); - - /* Set upper limit of address range behind bridge. */ - early_write_config_word(hose, top_bus, current_bus, pci_devfn, - PCI_MEMORY_LIMIT, pciauto_lower_memspc >> 16); - early_write_config_byte(hose, top_bus, current_bus, pci_devfn, - PCI_IO_LIMIT, (pciauto_lower_iospc & 0x0000f000) >> 8); - early_write_config_word(hose, top_bus, current_bus, pci_devfn, - PCI_IO_LIMIT_UPPER16, pciauto_lower_iospc >> 16); - - /* Align memory and I/O to 1MB and 4KB boundaries. */ - pciauto_lower_memspc = (pciauto_lower_memspc + (0x100000 - 1)) - & ~(0x100000 - 1); - pciauto_lower_iospc = (pciauto_lower_iospc + (0x1000 - 1)) - & ~(0x1000 - 1); - - /* Enable memory and I/O accesses, enable bus master */ - early_read_config_dword(hose, top_bus, current_bus, pci_devfn, - PCI_COMMAND, &temp); - early_write_config_dword(hose, top_bus, current_bus, pci_devfn, - PCI_COMMAND, temp | PCI_COMMAND_IO | PCI_COMMAND_MEMORY - | PCI_COMMAND_MASTER); -} - -static void __init -pciauto_prescan_setup_cardbus_bridge(struct pci_channel *hose, - int top_bus, - int current_bus, - int pci_devfn, - int sub_bus) -{ - /* Configure bus number registers */ - early_write_config_byte(hose, top_bus, current_bus, pci_devfn, - PCI_PRIMARY_BUS, current_bus); - early_write_config_byte(hose, top_bus, current_bus, pci_devfn, - PCI_SECONDARY_BUS, sub_bus + 1); - early_write_config_byte(hose, top_bus, current_bus, pci_devfn, - PCI_SUBORDINATE_BUS, 0xff); - - /* Align memory and I/O to 4KB and 4 byte boundaries. */ - pciauto_lower_memspc = (pciauto_lower_memspc + (0x1000 - 1)) - & ~(0x1000 - 1); - pciauto_lower_iospc = (pciauto_lower_iospc + (0x4 - 1)) - & ~(0x4 - 1); - - early_write_config_dword(hose, top_bus, current_bus, pci_devfn, - PCI_CB_MEMORY_BASE_0, pciauto_lower_memspc); - early_write_config_dword(hose, top_bus, current_bus, pci_devfn, - PCI_CB_IO_BASE_0, pciauto_lower_iospc); -} - -static void __init -pciauto_postscan_setup_cardbus_bridge(struct pci_channel *hose, - int top_bus, - int current_bus, - int pci_devfn, - int sub_bus) -{ - u32 temp; - - /* - * [jsun] we always bump up baselines a little, so that if there - * nothing behind P2P bridge, we don't wind up overlapping IO/MEM - * spaces. - */ - pciauto_lower_memspc += 1; - pciauto_lower_iospc += 1; - - /* - * Configure subordinate bus number. The PCI subsystem - * bus scan will renumber buses (reserving three additional - * for this PCI<->CardBus bridge for the case where a CardBus - * adapter contains a P2P or CB2CB bridge. - */ - - early_write_config_byte(hose, top_bus, current_bus, pci_devfn, - PCI_SUBORDINATE_BUS, sub_bus); - - /* - * Reserve an additional 4MB for mem space and 16KB for - * I/O space. This should cover any additional space - * requirement of unusual CardBus devices with - * additional bridges that can consume more address space. - * - * Although pcmcia-cs currently will reprogram bridge - * windows, the goal is to add an option to leave them - * alone and use the bridge window ranges as the regions - * that are searched for free resources upon hot-insertion - * of a device. This will allow a PCI<->CardBus bridge - * configured by this routine to happily live behind a - * P2P bridge in a system. - */ - /* Align memory and I/O to 4KB and 4 byte boundaries. */ - pciauto_lower_memspc = (pciauto_lower_memspc + (0x1000 - 1)) - & ~(0x1000 - 1); - pciauto_lower_iospc = (pciauto_lower_iospc + (0x4 - 1)) - & ~(0x4 - 1); - /* Set up memory and I/O filter limits, assume 32-bit I/O space */ - early_write_config_dword(hose, top_bus, current_bus, pci_devfn, - PCI_CB_MEMORY_LIMIT_0, pciauto_lower_memspc - 1); - early_write_config_dword(hose, top_bus, current_bus, pci_devfn, - PCI_CB_IO_LIMIT_0, pciauto_lower_iospc - 1); - - /* Enable memory and I/O accesses, enable bus master */ - early_read_config_dword(hose, top_bus, current_bus, pci_devfn, - PCI_COMMAND, &temp); - early_write_config_dword(hose, top_bus, current_bus, pci_devfn, - PCI_COMMAND, temp | PCI_COMMAND_IO | PCI_COMMAND_MEMORY | - PCI_COMMAND_MASTER); -} - -#define PCIAUTO_IDE_MODE_MASK 0x05 - -static int __init -pciauto_bus_scan(struct pci_channel *hose, int top_bus, int current_bus) -{ - int sub_bus; - u32 pci_devfn, pci_class, cmdstat, found_multi=0; - unsigned short vid, did; - unsigned char header_type; - int devfn_start = 0; - int devfn_stop = 0xff; - - sub_bus = current_bus; - - if (hose->first_devfn) - devfn_start = hose->first_devfn; - if (hose->last_devfn) - devfn_stop = hose->last_devfn; - - for (pci_devfn=devfn_start; pci_devfn> 16, vid, did); - if (pci_class & 0xff) - DBG(" (rev %.2x)", pci_class & 0xff); - DBG("\n"); - - if ((pci_class >> 16) == PCI_CLASS_BRIDGE_PCI) { - DBG(" Bridge: primary=%.2x, secondary=%.2x\n", - current_bus, sub_bus + 1); - pciauto_prescan_setup_bridge(hose, top_bus, current_bus, - pci_devfn, sub_bus); - DBG("Scanning sub bus %.2x, I/O 0x%.8x, Mem 0x%.8x\n", - sub_bus + 1, - pciauto_lower_iospc, pciauto_lower_memspc); - sub_bus = pciauto_bus_scan(hose, top_bus, sub_bus+1); - DBG("Back to bus %.2x\n", current_bus); - pciauto_postscan_setup_bridge(hose, top_bus, current_bus, - pci_devfn, sub_bus); - continue; - } else if ((pci_class >> 16) == PCI_CLASS_BRIDGE_CARDBUS) { - DBG(" CARDBUS Bridge: primary=%.2x, secondary=%.2x\n", - current_bus, sub_bus + 1); - DBG("PCI Autoconfig: Found CardBus bridge, device %d function %d\n", PCI_SLOT(pci_devfn), PCI_FUNC(pci_devfn)); - /* Place CardBus Socket/ExCA registers */ - pciauto_setup_bars(hose, top_bus, current_bus, pci_devfn, PCI_BASE_ADDRESS_0); - - pciauto_prescan_setup_cardbus_bridge(hose, top_bus, - current_bus, pci_devfn, sub_bus); - - DBG("Scanning sub bus %.2x, I/O 0x%.8x, Mem 0x%.8x\n", - sub_bus + 1, - pciauto_lower_iospc, pciauto_lower_memspc); - sub_bus = pciauto_bus_scan(hose, top_bus, sub_bus+1); - DBG("Back to bus %.2x, sub_bus is %x\n", current_bus, sub_bus); - pciauto_postscan_setup_cardbus_bridge(hose, top_bus, - current_bus, pci_devfn, sub_bus); - continue; - } else if ((pci_class >> 16) == PCI_CLASS_STORAGE_IDE) { - - unsigned char prg_iface; - - early_read_config_byte(hose, top_bus, current_bus, - pci_devfn, PCI_CLASS_PROG, &prg_iface); - if (!(prg_iface & PCIAUTO_IDE_MODE_MASK)) { - DBG("Skipping legacy mode IDE controller\n"); - continue; - } - } - - /* - * Found a peripheral, enable some standard - * settings - */ - early_read_config_dword(hose, top_bus, current_bus, pci_devfn, - PCI_COMMAND, &cmdstat); - early_write_config_dword(hose, top_bus, current_bus, pci_devfn, - PCI_COMMAND, cmdstat | PCI_COMMAND_IO | - PCI_COMMAND_MEMORY | - PCI_COMMAND_MASTER); - early_write_config_byte(hose, top_bus, current_bus, pci_devfn, - PCI_LATENCY_TIMER, 0x80); - - /* Allocate PCI I/O and/or memory space */ - pciauto_setup_bars(hose, top_bus, current_bus, pci_devfn, PCI_BASE_ADDRESS_5); - } - return sub_bus; -} - -int __init -pciauto_assign_resources(int busno, struct pci_channel *hose) -{ - /* setup resource limits */ - io_resource_inuse = hose->io_resource; - mem_resource_inuse = hose->mem_resource; - - pciauto_lower_iospc = io_resource_inuse->start; - pciauto_upper_iospc = io_resource_inuse->end + 1; - pciauto_lower_memspc = mem_resource_inuse->start; - pciauto_upper_memspc = mem_resource_inuse->end + 1; - DBG("Autoconfig PCI channel 0x%p\n", hose); - DBG("Scanning bus %.2x, I/O 0x%.8x:0x%.8x, Mem 0x%.8x:0x%.8x\n", - busno, pciauto_lower_iospc, pciauto_upper_iospc, - pciauto_lower_memspc, pciauto_upper_memspc); - - return pciauto_bus_scan(hose, busno, busno); -} diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c deleted file mode 100644 index 8c332b2a464..00000000000 --- a/arch/sh/drivers/pci/pci.c +++ /dev/null @@ -1,75 +0,0 @@ -/* - * arch/sh/drivers/pci/pci.c - * - * Copyright (c) 2002 M. R. Brown - * Copyright (c) 2004 - 2006 Paul Mundt - * - * These functions are collected here to reduce duplication of common - * code amongst the many platform-specific PCI support code files. - * - * These routines require the following board-specific routines: - * void pcibios_fixup_irqs(); - * - * See include/asm-sh/pci.h for more information. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include -#include -#include -#include -#include - -static int __init pcibios_init(void) -{ - struct pci_channel *p; - struct pci_bus *bus; - int busno; - - /* init channels */ - busno = 0; - for (p = board_pci_channels; p->init; p++) { - if (p->init(p) == 0) - p->enabled = 1; - else - pr_err("Unable to init pci channel %d\n", busno); - busno++; - } - -#ifdef CONFIG_PCI_AUTO - /* assign resources */ - busno = 0; - for (p = board_pci_channels; p->init; p++) - if (p->enabled) - busno = pciauto_assign_resources(busno, p) + 1; -#endif - - /* scan the buses */ - busno = 0; - for (p = board_pci_channels; p->init; p++) { - if (p->enabled) { - bus = pci_scan_bus(busno, p->pci_ops, p); - busno = bus->subordinate + 1; - } - } - - pci_fixup_irqs(pci_common_swizzle, pcibios_map_platform_irq); - - dma_debug_add_bus(&pci_bus_type); - - return 0; -} -subsys_initcall(pcibios_init); - -/* - * Called after each bus is probed, but before its children - * are examined. - */ -void __devinit __weak pcibios_fixup_bus(struct pci_bus *bus) -{ - pci_read_bridge_bases(bus); -} - -EXPORT_SYMBOL(board_pci_channels); diff --git a/arch/sh/include/asm/pci.h b/arch/sh/include/asm/pci.h index f36c7899295..f910121559b 100644 --- a/arch/sh/include/asm/pci.h +++ b/arch/sh/include/asm/pci.h @@ -19,8 +19,6 @@ struct pci_channel { struct pci_channel *next; - int (*init)(struct pci_channel *chan); - struct pci_ops *pci_ops; struct resource *io_resource; struct resource *mem_resource; @@ -28,20 +26,11 @@ struct pci_channel { unsigned long io_offset; unsigned long mem_offset; - int first_devfn; - int last_devfn; - int enabled; - unsigned long reg_base; unsigned long io_map_base; }; -/* - * Each board initializes this array and terminates it with a NULL entry. - */ -extern struct pci_channel board_pci_channels[]; - extern void register_pci_controller(struct pci_channel *hose); extern unsigned long PCIBIOS_MIN_IO, PCIBIOS_MIN_MEM; @@ -122,13 +111,8 @@ static inline void pci_dma_burst_advice(struct pci_dev *pdev, #endif /* Board-specific fixup routines. */ -int pcibios_init_platform(void); int pcibios_map_platform_irq(struct pci_dev *dev, u8 slot, u8 pin); -#ifdef CONFIG_PCI_AUTO -int pciauto_assign_resources(int busno, struct pci_channel *hose); -#endif - extern void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, struct resource *res); -- cgit v1.2.3 From 35bcfffd86aac933205fbf8401e3e7e4dde68264 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 20 Apr 2009 21:51:19 +0900 Subject: sh: pci: Roll pci-lib in to pci-new. Now that the pci-auto cruft is gone, pci-lib can go away. Roll it back in to pci-new.c where it originally split off from. Signed-off-by: Paul Mundt --- arch/sh/drivers/pci/Makefile | 1 - arch/sh/drivers/pci/pci-lib.c | 219 ---------------------------------------- arch/sh/drivers/pci/pci-new.c | 226 +++++++++++++++++++++++++++++++++++++++++- 3 files changed, 221 insertions(+), 225 deletions(-) delete mode 100644 arch/sh/drivers/pci/pci-lib.c diff --git a/arch/sh/drivers/pci/Makefile b/arch/sh/drivers/pci/Makefile index a8350ccfa9d..eacac7f475d 100644 --- a/arch/sh/drivers/pci/Makefile +++ b/arch/sh/drivers/pci/Makefile @@ -1,7 +1,6 @@ # # Makefile for the PCI specific kernel interface routines under Linux. # -obj-y += pci-lib.o obj-$(CONFIG_PCI_NEW) += pci-new.o obj-$(CONFIG_CPU_SUBTYPE_SH7751) += pci-sh7751.o ops-sh4.o diff --git a/arch/sh/drivers/pci/pci-lib.c b/arch/sh/drivers/pci/pci-lib.c deleted file mode 100644 index f072acafce6..00000000000 --- a/arch/sh/drivers/pci/pci-lib.c +++ /dev/null @@ -1,219 +0,0 @@ -#include -#include -#include -#include -#include - -unsigned long PCIBIOS_MIN_IO = 0x0000; -unsigned long PCIBIOS_MIN_MEM = 0; - -/* - * We need to avoid collisions with `mirrored' VGA ports - * and other strange ISA hardware, so we always want the - * addresses to be allocated in the 0x000-0x0ff region - * modulo 0x400. - */ -void pcibios_align_resource(void *data, struct resource *res, - resource_size_t size, resource_size_t align) -{ - struct pci_dev *dev = data; - struct pci_channel *chan = dev->sysdata; - resource_size_t start = res->start; - - if (res->flags & IORESOURCE_IO) { - if (start < PCIBIOS_MIN_IO + chan->io_resource->start) - start = PCIBIOS_MIN_IO + chan->io_resource->start; - - /* - * Put everything into 0x00-0xff region modulo 0x400. - */ - if (start & 0x300) { - start = (start + 0x3ff) & ~0x3ff; - res->start = start; - } - } else if (res->flags & IORESOURCE_MEM) { - if (start < PCIBIOS_MIN_MEM + chan->mem_resource->start) - start = PCIBIOS_MIN_MEM + chan->mem_resource->start; - } - - res->start = start; -} - -void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, - struct resource *res) -{ - struct pci_channel *hose = dev->sysdata; - unsigned long offset = 0; - - if (res->flags & IORESOURCE_IO) - offset = hose->io_offset; - else if (res->flags & IORESOURCE_MEM) - offset = hose->mem_offset; - - region->start = res->start - offset; - region->end = res->end - offset; -} - -void __devinit -pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, - struct pci_bus_region *region) -{ - struct pci_channel *hose = dev->sysdata; - unsigned long offset = 0; - - if (res->flags & IORESOURCE_IO) - offset = hose->io_offset; - else if (res->flags & IORESOURCE_MEM) - offset = hose->mem_offset; - - res->start = region->start + offset; - res->end = region->end + offset; -} - -int pcibios_enable_device(struct pci_dev *dev, int mask) -{ - u16 cmd, old_cmd; - int idx; - struct resource *r; - - pci_read_config_word(dev, PCI_COMMAND, &cmd); - old_cmd = cmd; - for (idx=0; idx < PCI_NUM_RESOURCES; idx++) { - /* Only set up the requested stuff */ - if (!(mask & (1<resource[idx]; - if (!(r->flags & (IORESOURCE_IO | IORESOURCE_MEM))) - continue; - if ((idx == PCI_ROM_RESOURCE) && - (!(r->flags & IORESOURCE_ROM_ENABLE))) - continue; - if (!r->start && r->end) { - printk(KERN_ERR "PCI: Device %s not available " - "because of resource collisions\n", - pci_name(dev)); - return -EINVAL; - } - if (r->flags & IORESOURCE_IO) - cmd |= PCI_COMMAND_IO; - if (r->flags & IORESOURCE_MEM) - cmd |= PCI_COMMAND_MEMORY; - } - if (cmd != old_cmd) { - printk("PCI: Enabling device %s (%04x -> %04x)\n", - pci_name(dev), old_cmd, cmd); - pci_write_config_word(dev, PCI_COMMAND, cmd); - } - return 0; -} - -/* - * If we set up a device for bus mastering, we need to check and set - * the latency timer as it may not be properly set. - */ -static unsigned int pcibios_max_latency = 255; - -void pcibios_set_master(struct pci_dev *dev) -{ - u8 lat; - pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat); - if (lat < 16) - lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency; - else if (lat > pcibios_max_latency) - lat = pcibios_max_latency; - else - return; - printk(KERN_INFO "PCI: Setting latency timer of device %s to %d\n", - pci_name(dev), lat); - pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat); -} - -void __init pcibios_update_irq(struct pci_dev *dev, int irq) -{ - pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq); -} - -char * __devinit pcibios_setup(char *str) -{ - return str; -} - -int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, - enum pci_mmap_state mmap_state, int write_combine) -{ - /* - * I/O space can be accessed via normal processor loads and stores on - * this platform but for now we elect not to do this and portable - * drivers should not do this anyway. - */ - if (mmap_state == pci_mmap_io) - return -EINVAL; - - /* - * Ignore write-combine; for now only return uncached mappings. - */ - vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); - - return remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff, - vma->vm_end - vma->vm_start, - vma->vm_page_prot); -} - -static void __iomem *ioport_map_pci(struct pci_dev *dev, - unsigned long port, unsigned int nr) -{ - struct pci_channel *chan = dev->sysdata; - - if (!chan->io_map_base) - chan->io_map_base = generic_io_base; - - return (void __iomem *)(chan->io_map_base + port); -} - -void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen) -{ - resource_size_t start = pci_resource_start(dev, bar); - resource_size_t len = pci_resource_len(dev, bar); - unsigned long flags = pci_resource_flags(dev, bar); - - if (unlikely(!len || !start)) - return NULL; - if (maxlen && len > maxlen) - len = maxlen; - - if (flags & IORESOURCE_IO) - return ioport_map_pci(dev, start, len); - - /* - * Presently the IORESOURCE_MEM case is a bit special, most - * SH7751 style PCI controllers have PCI memory at a fixed - * location in the address space where no remapping is desired. - * With the IORESOURCE_MEM case more care has to be taken - * to inhibit page table mapping for legacy cores, but this is - * punted off to __ioremap(). - * -- PFM. - */ - if (flags & IORESOURCE_MEM) { - if (flags & IORESOURCE_CACHEABLE) - return ioremap(start, len); - - return ioremap_nocache(start, len); - } - - return NULL; -} -EXPORT_SYMBOL(pci_iomap); - -void pci_iounmap(struct pci_dev *dev, void __iomem *addr) -{ - iounmap(addr); -} -EXPORT_SYMBOL(pci_iounmap); - -#ifdef CONFIG_HOTPLUG -EXPORT_SYMBOL(pcibios_resource_to_bus); -EXPORT_SYMBOL(pcibios_bus_to_resource); -EXPORT_SYMBOL(PCIBIOS_MIN_IO); -EXPORT_SYMBOL(PCIBIOS_MIN_MEM); -#endif diff --git a/arch/sh/drivers/pci/pci-new.c b/arch/sh/drivers/pci/pci-new.c index 8c0b136eecb..54d77cbb8b3 100644 --- a/arch/sh/drivers/pci/pci-new.c +++ b/arch/sh/drivers/pci/pci-new.c @@ -1,20 +1,28 @@ /* * New-style PCI core. * - * Copyright (c) 2002 M. R. Brown * Copyright (c) 2004 - 2009 Paul Mundt + * Copyright (c) 2002 M. R. Brown + * + * Modelled after arch/mips/pci/pci.c: + * Copyright (C) 2003, 04 Ralf Baechle (ralf@linux-mips.org) * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive * for more details. */ #include +#include #include #include +#include #include #include #include +unsigned long PCIBIOS_MIN_IO = 0x0000; +unsigned long PCIBIOS_MIN_MEM = 0; + /* * The PCI controller list. */ @@ -27,9 +35,6 @@ static void __devinit pcibios_scanbus(struct pci_channel *hose) static int next_busno; struct pci_bus *bus; - /* Catch botched conversion attempts */ - BUG_ON(hose->init); - bus = pci_scan_bus(next_busno, hose->pci_ops, hose); if (bus) { next_busno = bus->subordinate + 1; @@ -128,7 +133,7 @@ static void pcibios_fixup_device_resources(struct pci_dev *dev, * Called after each bus is probed, but before its children * are examined. */ -void __devinit __weak pcibios_fixup_bus(struct pci_bus *bus) +void __devinit pcibios_fixup_bus(struct pci_bus *bus) { struct pci_dev *dev = bus->self; struct list_head *ln; @@ -146,3 +151,214 @@ void __devinit __weak pcibios_fixup_bus(struct pci_bus *bus) pcibios_fixup_device_resources(dev, bus); } } + +/* + * We need to avoid collisions with `mirrored' VGA ports + * and other strange ISA hardware, so we always want the + * addresses to be allocated in the 0x000-0x0ff region + * modulo 0x400. + */ +void pcibios_align_resource(void *data, struct resource *res, + resource_size_t size, resource_size_t align) +{ + struct pci_dev *dev = data; + struct pci_channel *chan = dev->sysdata; + resource_size_t start = res->start; + + if (res->flags & IORESOURCE_IO) { + if (start < PCIBIOS_MIN_IO + chan->io_resource->start) + start = PCIBIOS_MIN_IO + chan->io_resource->start; + + /* + * Put everything into 0x00-0xff region modulo 0x400. + */ + if (start & 0x300) { + start = (start + 0x3ff) & ~0x3ff; + res->start = start; + } + } else if (res->flags & IORESOURCE_MEM) { + if (start < PCIBIOS_MIN_MEM + chan->mem_resource->start) + start = PCIBIOS_MIN_MEM + chan->mem_resource->start; + } + + res->start = start; +} + +void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, + struct resource *res) +{ + struct pci_channel *hose = dev->sysdata; + unsigned long offset = 0; + + if (res->flags & IORESOURCE_IO) + offset = hose->io_offset; + else if (res->flags & IORESOURCE_MEM) + offset = hose->mem_offset; + + region->start = res->start - offset; + region->end = res->end - offset; +} + +void __devinit +pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, + struct pci_bus_region *region) +{ + struct pci_channel *hose = dev->sysdata; + unsigned long offset = 0; + + if (res->flags & IORESOURCE_IO) + offset = hose->io_offset; + else if (res->flags & IORESOURCE_MEM) + offset = hose->mem_offset; + + res->start = region->start + offset; + res->end = region->end + offset; +} + +int pcibios_enable_device(struct pci_dev *dev, int mask) +{ + u16 cmd, old_cmd; + int idx; + struct resource *r; + + pci_read_config_word(dev, PCI_COMMAND, &cmd); + old_cmd = cmd; + for (idx=0; idx < PCI_NUM_RESOURCES; idx++) { + /* Only set up the requested stuff */ + if (!(mask & (1<resource[idx]; + if (!(r->flags & (IORESOURCE_IO | IORESOURCE_MEM))) + continue; + if ((idx == PCI_ROM_RESOURCE) && + (!(r->flags & IORESOURCE_ROM_ENABLE))) + continue; + if (!r->start && r->end) { + printk(KERN_ERR "PCI: Device %s not available " + "because of resource collisions\n", + pci_name(dev)); + return -EINVAL; + } + if (r->flags & IORESOURCE_IO) + cmd |= PCI_COMMAND_IO; + if (r->flags & IORESOURCE_MEM) + cmd |= PCI_COMMAND_MEMORY; + } + if (cmd != old_cmd) { + printk("PCI: Enabling device %s (%04x -> %04x)\n", + pci_name(dev), old_cmd, cmd); + pci_write_config_word(dev, PCI_COMMAND, cmd); + } + return 0; +} + +/* + * If we set up a device for bus mastering, we need to check and set + * the latency timer as it may not be properly set. + */ +static unsigned int pcibios_max_latency = 255; + +void pcibios_set_master(struct pci_dev *dev) +{ + u8 lat; + pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat); + if (lat < 16) + lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency; + else if (lat > pcibios_max_latency) + lat = pcibios_max_latency; + else + return; + printk(KERN_INFO "PCI: Setting latency timer of device %s to %d\n", + pci_name(dev), lat); + pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat); +} + +void __init pcibios_update_irq(struct pci_dev *dev, int irq) +{ + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq); +} + +char * __devinit pcibios_setup(char *str) +{ + return str; +} + +int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, + enum pci_mmap_state mmap_state, int write_combine) +{ + /* + * I/O space can be accessed via normal processor loads and stores on + * this platform but for now we elect not to do this and portable + * drivers should not do this anyway. + */ + if (mmap_state == pci_mmap_io) + return -EINVAL; + + /* + * Ignore write-combine; for now only return uncached mappings. + */ + vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); + + return remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff, + vma->vm_end - vma->vm_start, + vma->vm_page_prot); +} + +static void __iomem *ioport_map_pci(struct pci_dev *dev, + unsigned long port, unsigned int nr) +{ + struct pci_channel *chan = dev->sysdata; + + if (!chan->io_map_base) + chan->io_map_base = generic_io_base; + + return (void __iomem *)(chan->io_map_base + port); +} + +void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen) +{ + resource_size_t start = pci_resource_start(dev, bar); + resource_size_t len = pci_resource_len(dev, bar); + unsigned long flags = pci_resource_flags(dev, bar); + + if (unlikely(!len || !start)) + return NULL; + if (maxlen && len > maxlen) + len = maxlen; + + if (flags & IORESOURCE_IO) + return ioport_map_pci(dev, start, len); + + /* + * Presently the IORESOURCE_MEM case is a bit special, most + * SH7751 style PCI controllers have PCI memory at a fixed + * location in the address space where no remapping is desired. + * With the IORESOURCE_MEM case more care has to be taken + * to inhibit page table mapping for legacy cores, but this is + * punted off to __ioremap(). + * -- PFM. + */ + if (flags & IORESOURCE_MEM) { + if (flags & IORESOURCE_CACHEABLE) + return ioremap(start, len); + + return ioremap_nocache(start, len); + } + + return NULL; +} +EXPORT_SYMBOL(pci_iomap); + +void pci_iounmap(struct pci_dev *dev, void __iomem *addr) +{ + iounmap(addr); +} +EXPORT_SYMBOL(pci_iounmap); + +#ifdef CONFIG_HOTPLUG +EXPORT_SYMBOL(pcibios_resource_to_bus); +EXPORT_SYMBOL(pcibios_bus_to_resource); +EXPORT_SYMBOL(PCIBIOS_MIN_IO); +EXPORT_SYMBOL(PCIBIOS_MIN_MEM); +#endif -- cgit v1.2.3 From cf242007a1eb29dcf93d1cb34713ec9b3f4a0e1b Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 20 Apr 2009 21:53:33 +0900 Subject: sh: pci: Rename pci-new.c to pci.c. pci-new.c is now in a state to replace the old pci.c, rename it accordingly. Signed-off-by: Paul Mundt --- arch/sh/drivers/pci/Kconfig | 4 - arch/sh/drivers/pci/Makefile | 2 +- arch/sh/drivers/pci/pci-new.c | 364 ------------------------------------------ arch/sh/drivers/pci/pci.c | 364 ++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 365 insertions(+), 369 deletions(-) delete mode 100644 arch/sh/drivers/pci/pci-new.c create mode 100644 arch/sh/drivers/pci/pci.c diff --git a/arch/sh/drivers/pci/Kconfig b/arch/sh/drivers/pci/Kconfig index ea903a984f0..e8db585a663 100644 --- a/arch/sh/drivers/pci/Kconfig +++ b/arch/sh/drivers/pci/Kconfig @@ -17,7 +17,3 @@ config SH_PCIDMA_NONCOHERENT code will not have to flush the CPU's caches. If you have a PCI host bridge integrated with your SH CPU, refer carefully to the chip specs to see if you can say 'N' here. Otherwise, leave it as 'Y'. - -config PCI_NEW - def_bool y - depends on PCI diff --git a/arch/sh/drivers/pci/Makefile b/arch/sh/drivers/pci/Makefile index eacac7f475d..d2ffc477549 100644 --- a/arch/sh/drivers/pci/Makefile +++ b/arch/sh/drivers/pci/Makefile @@ -1,7 +1,7 @@ # # Makefile for the PCI specific kernel interface routines under Linux. # -obj-$(CONFIG_PCI_NEW) += pci-new.o +obj-y += pci.o obj-$(CONFIG_CPU_SUBTYPE_SH7751) += pci-sh7751.o ops-sh4.o obj-$(CONFIG_CPU_SUBTYPE_SH7751R) += pci-sh7751.o ops-sh4.o diff --git a/arch/sh/drivers/pci/pci-new.c b/arch/sh/drivers/pci/pci-new.c deleted file mode 100644 index 54d77cbb8b3..00000000000 --- a/arch/sh/drivers/pci/pci-new.c +++ /dev/null @@ -1,364 +0,0 @@ -/* - * New-style PCI core. - * - * Copyright (c) 2004 - 2009 Paul Mundt - * Copyright (c) 2002 M. R. Brown - * - * Modelled after arch/mips/pci/pci.c: - * Copyright (C) 2003, 04 Ralf Baechle (ralf@linux-mips.org) - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include -#include -#include -#include -#include -#include -#include -#include - -unsigned long PCIBIOS_MIN_IO = 0x0000; -unsigned long PCIBIOS_MIN_MEM = 0; - -/* - * The PCI controller list. - */ -static struct pci_channel *hose_head, **hose_tail = &hose_head; - -static int pci_initialized; - -static void __devinit pcibios_scanbus(struct pci_channel *hose) -{ - static int next_busno; - struct pci_bus *bus; - - bus = pci_scan_bus(next_busno, hose->pci_ops, hose); - if (bus) { - next_busno = bus->subordinate + 1; - /* Don't allow 8-bit bus number overflow inside the hose - - reserve some space for bridges. */ - if (next_busno > 224) - next_busno = 0; - - pci_bus_size_bridges(bus); - pci_bus_assign_resources(bus); - pci_enable_bridges(bus); - } -} - -static DEFINE_MUTEX(pci_scan_mutex); - -void __devinit register_pci_controller(struct pci_channel *hose) -{ - if (request_resource(&iomem_resource, hose->mem_resource) < 0) - goto out; - if (request_resource(&ioport_resource, hose->io_resource) < 0) { - release_resource(hose->mem_resource); - goto out; - } - - *hose_tail = hose; - hose_tail = &hose->next; - - /* - * Do not panic here but later - this might hapen before console init. - */ - if (!hose->io_map_base) { - printk(KERN_WARNING - "registering PCI controller with io_map_base unset\n"); - } - - /* - * Scan the bus if it is register after the PCI subsystem - * initialization. - */ - if (pci_initialized) { - mutex_lock(&pci_scan_mutex); - pcibios_scanbus(hose); - mutex_unlock(&pci_scan_mutex); - } - - return; - -out: - printk(KERN_WARNING - "Skipping PCI bus scan due to resource conflict\n"); -} - -static int __init pcibios_init(void) -{ - struct pci_channel *hose; - - /* Scan all of the recorded PCI controllers. */ - for (hose = hose_head; hose; hose = hose->next) - pcibios_scanbus(hose); - - pci_fixup_irqs(pci_common_swizzle, pcibios_map_platform_irq); - - dma_debug_add_bus(&pci_bus_type); - - pci_initialized = 1; - - return 0; -} -subsys_initcall(pcibios_init); - -static void pcibios_fixup_device_resources(struct pci_dev *dev, - struct pci_bus *bus) -{ - /* Update device resources. */ - struct pci_channel *hose = bus->sysdata; - unsigned long offset = 0; - int i; - - for (i = 0; i < PCI_NUM_RESOURCES; i++) { - if (!dev->resource[i].start) - continue; - if (dev->resource[i].flags & IORESOURCE_PCI_FIXED) - continue; - if (dev->resource[i].flags & IORESOURCE_IO) - offset = hose->io_offset; - else if (dev->resource[i].flags & IORESOURCE_MEM) - offset = hose->mem_offset; - - dev->resource[i].start += offset; - dev->resource[i].end += offset; - } -} - -/* - * Called after each bus is probed, but before its children - * are examined. - */ -void __devinit pcibios_fixup_bus(struct pci_bus *bus) -{ - struct pci_dev *dev = bus->self; - struct list_head *ln; - struct pci_channel *chan = bus->sysdata; - - if (!dev) { - bus->resource[0] = chan->io_resource; - bus->resource[1] = chan->mem_resource; - } - - for (ln = bus->devices.next; ln != &bus->devices; ln = ln->next) { - dev = pci_dev_b(ln); - - if ((dev->class >> 8) != PCI_CLASS_BRIDGE_PCI) - pcibios_fixup_device_resources(dev, bus); - } -} - -/* - * We need to avoid collisions with `mirrored' VGA ports - * and other strange ISA hardware, so we always want the - * addresses to be allocated in the 0x000-0x0ff region - * modulo 0x400. - */ -void pcibios_align_resource(void *data, struct resource *res, - resource_size_t size, resource_size_t align) -{ - struct pci_dev *dev = data; - struct pci_channel *chan = dev->sysdata; - resource_size_t start = res->start; - - if (res->flags & IORESOURCE_IO) { - if (start < PCIBIOS_MIN_IO + chan->io_resource->start) - start = PCIBIOS_MIN_IO + chan->io_resource->start; - - /* - * Put everything into 0x00-0xff region modulo 0x400. - */ - if (start & 0x300) { - start = (start + 0x3ff) & ~0x3ff; - res->start = start; - } - } else if (res->flags & IORESOURCE_MEM) { - if (start < PCIBIOS_MIN_MEM + chan->mem_resource->start) - start = PCIBIOS_MIN_MEM + chan->mem_resource->start; - } - - res->start = start; -} - -void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, - struct resource *res) -{ - struct pci_channel *hose = dev->sysdata; - unsigned long offset = 0; - - if (res->flags & IORESOURCE_IO) - offset = hose->io_offset; - else if (res->flags & IORESOURCE_MEM) - offset = hose->mem_offset; - - region->start = res->start - offset; - region->end = res->end - offset; -} - -void __devinit -pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, - struct pci_bus_region *region) -{ - struct pci_channel *hose = dev->sysdata; - unsigned long offset = 0; - - if (res->flags & IORESOURCE_IO) - offset = hose->io_offset; - else if (res->flags & IORESOURCE_MEM) - offset = hose->mem_offset; - - res->start = region->start + offset; - res->end = region->end + offset; -} - -int pcibios_enable_device(struct pci_dev *dev, int mask) -{ - u16 cmd, old_cmd; - int idx; - struct resource *r; - - pci_read_config_word(dev, PCI_COMMAND, &cmd); - old_cmd = cmd; - for (idx=0; idx < PCI_NUM_RESOURCES; idx++) { - /* Only set up the requested stuff */ - if (!(mask & (1<resource[idx]; - if (!(r->flags & (IORESOURCE_IO | IORESOURCE_MEM))) - continue; - if ((idx == PCI_ROM_RESOURCE) && - (!(r->flags & IORESOURCE_ROM_ENABLE))) - continue; - if (!r->start && r->end) { - printk(KERN_ERR "PCI: Device %s not available " - "because of resource collisions\n", - pci_name(dev)); - return -EINVAL; - } - if (r->flags & IORESOURCE_IO) - cmd |= PCI_COMMAND_IO; - if (r->flags & IORESOURCE_MEM) - cmd |= PCI_COMMAND_MEMORY; - } - if (cmd != old_cmd) { - printk("PCI: Enabling device %s (%04x -> %04x)\n", - pci_name(dev), old_cmd, cmd); - pci_write_config_word(dev, PCI_COMMAND, cmd); - } - return 0; -} - -/* - * If we set up a device for bus mastering, we need to check and set - * the latency timer as it may not be properly set. - */ -static unsigned int pcibios_max_latency = 255; - -void pcibios_set_master(struct pci_dev *dev) -{ - u8 lat; - pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat); - if (lat < 16) - lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency; - else if (lat > pcibios_max_latency) - lat = pcibios_max_latency; - else - return; - printk(KERN_INFO "PCI: Setting latency timer of device %s to %d\n", - pci_name(dev), lat); - pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat); -} - -void __init pcibios_update_irq(struct pci_dev *dev, int irq) -{ - pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq); -} - -char * __devinit pcibios_setup(char *str) -{ - return str; -} - -int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, - enum pci_mmap_state mmap_state, int write_combine) -{ - /* - * I/O space can be accessed via normal processor loads and stores on - * this platform but for now we elect not to do this and portable - * drivers should not do this anyway. - */ - if (mmap_state == pci_mmap_io) - return -EINVAL; - - /* - * Ignore write-combine; for now only return uncached mappings. - */ - vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); - - return remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff, - vma->vm_end - vma->vm_start, - vma->vm_page_prot); -} - -static void __iomem *ioport_map_pci(struct pci_dev *dev, - unsigned long port, unsigned int nr) -{ - struct pci_channel *chan = dev->sysdata; - - if (!chan->io_map_base) - chan->io_map_base = generic_io_base; - - return (void __iomem *)(chan->io_map_base + port); -} - -void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen) -{ - resource_size_t start = pci_resource_start(dev, bar); - resource_size_t len = pci_resource_len(dev, bar); - unsigned long flags = pci_resource_flags(dev, bar); - - if (unlikely(!len || !start)) - return NULL; - if (maxlen && len > maxlen) - len = maxlen; - - if (flags & IORESOURCE_IO) - return ioport_map_pci(dev, start, len); - - /* - * Presently the IORESOURCE_MEM case is a bit special, most - * SH7751 style PCI controllers have PCI memory at a fixed - * location in the address space where no remapping is desired. - * With the IORESOURCE_MEM case more care has to be taken - * to inhibit page table mapping for legacy cores, but this is - * punted off to __ioremap(). - * -- PFM. - */ - if (flags & IORESOURCE_MEM) { - if (flags & IORESOURCE_CACHEABLE) - return ioremap(start, len); - - return ioremap_nocache(start, len); - } - - return NULL; -} -EXPORT_SYMBOL(pci_iomap); - -void pci_iounmap(struct pci_dev *dev, void __iomem *addr) -{ - iounmap(addr); -} -EXPORT_SYMBOL(pci_iounmap); - -#ifdef CONFIG_HOTPLUG -EXPORT_SYMBOL(pcibios_resource_to_bus); -EXPORT_SYMBOL(pcibios_bus_to_resource); -EXPORT_SYMBOL(PCIBIOS_MIN_IO); -EXPORT_SYMBOL(PCIBIOS_MIN_MEM); -#endif diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c new file mode 100644 index 00000000000..54d77cbb8b3 --- /dev/null +++ b/arch/sh/drivers/pci/pci.c @@ -0,0 +1,364 @@ +/* + * New-style PCI core. + * + * Copyright (c) 2004 - 2009 Paul Mundt + * Copyright (c) 2002 M. R. Brown + * + * Modelled after arch/mips/pci/pci.c: + * Copyright (C) 2003, 04 Ralf Baechle (ralf@linux-mips.org) + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include +#include +#include +#include +#include + +unsigned long PCIBIOS_MIN_IO = 0x0000; +unsigned long PCIBIOS_MIN_MEM = 0; + +/* + * The PCI controller list. + */ +static struct pci_channel *hose_head, **hose_tail = &hose_head; + +static int pci_initialized; + +static void __devinit pcibios_scanbus(struct pci_channel *hose) +{ + static int next_busno; + struct pci_bus *bus; + + bus = pci_scan_bus(next_busno, hose->pci_ops, hose); + if (bus) { + next_busno = bus->subordinate + 1; + /* Don't allow 8-bit bus number overflow inside the hose - + reserve some space for bridges. */ + if (next_busno > 224) + next_busno = 0; + + pci_bus_size_bridges(bus); + pci_bus_assign_resources(bus); + pci_enable_bridges(bus); + } +} + +static DEFINE_MUTEX(pci_scan_mutex); + +void __devinit register_pci_controller(struct pci_channel *hose) +{ + if (request_resource(&iomem_resource, hose->mem_resource) < 0) + goto out; + if (request_resource(&ioport_resource, hose->io_resource) < 0) { + release_resource(hose->mem_resource); + goto out; + } + + *hose_tail = hose; + hose_tail = &hose->next; + + /* + * Do not panic here but later - this might hapen before console init. + */ + if (!hose->io_map_base) { + printk(KERN_WARNING + "registering PCI controller with io_map_base unset\n"); + } + + /* + * Scan the bus if it is register after the PCI subsystem + * initialization. + */ + if (pci_initialized) { + mutex_lock(&pci_scan_mutex); + pcibios_scanbus(hose); + mutex_unlock(&pci_scan_mutex); + } + + return; + +out: + printk(KERN_WARNING + "Skipping PCI bus scan due to resource conflict\n"); +} + +static int __init pcibios_init(void) +{ + struct pci_channel *hose; + + /* Scan all of the recorded PCI controllers. */ + for (hose = hose_head; hose; hose = hose->next) + pcibios_scanbus(hose); + + pci_fixup_irqs(pci_common_swizzle, pcibios_map_platform_irq); + + dma_debug_add_bus(&pci_bus_type); + + pci_initialized = 1; + + return 0; +} +subsys_initcall(pcibios_init); + +static void pcibios_fixup_device_resources(struct pci_dev *dev, + struct pci_bus *bus) +{ + /* Update device resources. */ + struct pci_channel *hose = bus->sysdata; + unsigned long offset = 0; + int i; + + for (i = 0; i < PCI_NUM_RESOURCES; i++) { + if (!dev->resource[i].start) + continue; + if (dev->resource[i].flags & IORESOURCE_PCI_FIXED) + continue; + if (dev->resource[i].flags & IORESOURCE_IO) + offset = hose->io_offset; + else if (dev->resource[i].flags & IORESOURCE_MEM) + offset = hose->mem_offset; + + dev->resource[i].start += offset; + dev->resource[i].end += offset; + } +} + +/* + * Called after each bus is probed, but before its children + * are examined. + */ +void __devinit pcibios_fixup_bus(struct pci_bus *bus) +{ + struct pci_dev *dev = bus->self; + struct list_head *ln; + struct pci_channel *chan = bus->sysdata; + + if (!dev) { + bus->resource[0] = chan->io_resource; + bus->resource[1] = chan->mem_resource; + } + + for (ln = bus->devices.next; ln != &bus->devices; ln = ln->next) { + dev = pci_dev_b(ln); + + if ((dev->class >> 8) != PCI_CLASS_BRIDGE_PCI) + pcibios_fixup_device_resources(dev, bus); + } +} + +/* + * We need to avoid collisions with `mirrored' VGA ports + * and other strange ISA hardware, so we always want the + * addresses to be allocated in the 0x000-0x0ff region + * modulo 0x400. + */ +void pcibios_align_resource(void *data, struct resource *res, + resource_size_t size, resource_size_t align) +{ + struct pci_dev *dev = data; + struct pci_channel *chan = dev->sysdata; + resource_size_t start = res->start; + + if (res->flags & IORESOURCE_IO) { + if (start < PCIBIOS_MIN_IO + chan->io_resource->start) + start = PCIBIOS_MIN_IO + chan->io_resource->start; + + /* + * Put everything into 0x00-0xff region modulo 0x400. + */ + if (start & 0x300) { + start = (start + 0x3ff) & ~0x3ff; + res->start = start; + } + } else if (res->flags & IORESOURCE_MEM) { + if (start < PCIBIOS_MIN_MEM + chan->mem_resource->start) + start = PCIBIOS_MIN_MEM + chan->mem_resource->start; + } + + res->start = start; +} + +void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, + struct resource *res) +{ + struct pci_channel *hose = dev->sysdata; + unsigned long offset = 0; + + if (res->flags & IORESOURCE_IO) + offset = hose->io_offset; + else if (res->flags & IORESOURCE_MEM) + offset = hose->mem_offset; + + region->start = res->start - offset; + region->end = res->end - offset; +} + +void __devinit +pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, + struct pci_bus_region *region) +{ + struct pci_channel *hose = dev->sysdata; + unsigned long offset = 0; + + if (res->flags & IORESOURCE_IO) + offset = hose->io_offset; + else if (res->flags & IORESOURCE_MEM) + offset = hose->mem_offset; + + res->start = region->start + offset; + res->end = region->end + offset; +} + +int pcibios_enable_device(struct pci_dev *dev, int mask) +{ + u16 cmd, old_cmd; + int idx; + struct resource *r; + + pci_read_config_word(dev, PCI_COMMAND, &cmd); + old_cmd = cmd; + for (idx=0; idx < PCI_NUM_RESOURCES; idx++) { + /* Only set up the requested stuff */ + if (!(mask & (1<resource[idx]; + if (!(r->flags & (IORESOURCE_IO | IORESOURCE_MEM))) + continue; + if ((idx == PCI_ROM_RESOURCE) && + (!(r->flags & IORESOURCE_ROM_ENABLE))) + continue; + if (!r->start && r->end) { + printk(KERN_ERR "PCI: Device %s not available " + "because of resource collisions\n", + pci_name(dev)); + return -EINVAL; + } + if (r->flags & IORESOURCE_IO) + cmd |= PCI_COMMAND_IO; + if (r->flags & IORESOURCE_MEM) + cmd |= PCI_COMMAND_MEMORY; + } + if (cmd != old_cmd) { + printk("PCI: Enabling device %s (%04x -> %04x)\n", + pci_name(dev), old_cmd, cmd); + pci_write_config_word(dev, PCI_COMMAND, cmd); + } + return 0; +} + +/* + * If we set up a device for bus mastering, we need to check and set + * the latency timer as it may not be properly set. + */ +static unsigned int pcibios_max_latency = 255; + +void pcibios_set_master(struct pci_dev *dev) +{ + u8 lat; + pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat); + if (lat < 16) + lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency; + else if (lat > pcibios_max_latency) + lat = pcibios_max_latency; + else + return; + printk(KERN_INFO "PCI: Setting latency timer of device %s to %d\n", + pci_name(dev), lat); + pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat); +} + +void __init pcibios_update_irq(struct pci_dev *dev, int irq) +{ + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq); +} + +char * __devinit pcibios_setup(char *str) +{ + return str; +} + +int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, + enum pci_mmap_state mmap_state, int write_combine) +{ + /* + * I/O space can be accessed via normal processor loads and stores on + * this platform but for now we elect not to do this and portable + * drivers should not do this anyway. + */ + if (mmap_state == pci_mmap_io) + return -EINVAL; + + /* + * Ignore write-combine; for now only return uncached mappings. + */ + vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); + + return remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff, + vma->vm_end - vma->vm_start, + vma->vm_page_prot); +} + +static void __iomem *ioport_map_pci(struct pci_dev *dev, + unsigned long port, unsigned int nr) +{ + struct pci_channel *chan = dev->sysdata; + + if (!chan->io_map_base) + chan->io_map_base = generic_io_base; + + return (void __iomem *)(chan->io_map_base + port); +} + +void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen) +{ + resource_size_t start = pci_resource_start(dev, bar); + resource_size_t len = pci_resource_len(dev, bar); + unsigned long flags = pci_resource_flags(dev, bar); + + if (unlikely(!len || !start)) + return NULL; + if (maxlen && len > maxlen) + len = maxlen; + + if (flags & IORESOURCE_IO) + return ioport_map_pci(dev, start, len); + + /* + * Presently the IORESOURCE_MEM case is a bit special, most + * SH7751 style PCI controllers have PCI memory at a fixed + * location in the address space where no remapping is desired. + * With the IORESOURCE_MEM case more care has to be taken + * to inhibit page table mapping for legacy cores, but this is + * punted off to __ioremap(). + * -- PFM. + */ + if (flags & IORESOURCE_MEM) { + if (flags & IORESOURCE_CACHEABLE) + return ioremap(start, len); + + return ioremap_nocache(start, len); + } + + return NULL; +} +EXPORT_SYMBOL(pci_iomap); + +void pci_iounmap(struct pci_dev *dev, void __iomem *addr) +{ + iounmap(addr); +} +EXPORT_SYMBOL(pci_iounmap); + +#ifdef CONFIG_HOTPLUG +EXPORT_SYMBOL(pcibios_resource_to_bus); +EXPORT_SYMBOL(pcibios_bus_to_resource); +EXPORT_SYMBOL(PCIBIOS_MIN_IO); +EXPORT_SYMBOL(PCIBIOS_MIN_MEM); +#endif -- cgit v1.2.3 From eb8f3142fa30201426feb7b3f9046fcd730e17d3 Mon Sep 17 00:00:00 2001 From: Mikael Pettersson Date: Sat, 18 Apr 2009 21:26:57 +0100 Subject: [ARM] 5456/1: add sys_preadv and sys_pwritev Kernel 2.6.30-rc1 added sys_preadv and sys_pwritev to most archs but not ARM, resulting in :1421:2: warning: #warning syscall preadv not implemented :1425:2: warning: #warning syscall pwritev not implemented This patch adds sys_preadv and sys_pwritev to ARM. These syscalls simply take five long-sized parameters, so they should have no calling-convention/ABI issues in the kernel. Tested on armv5tel eabi using a preadv/pwritev test program posted on linuxppc-dev earlier this month. It would be nice to get this into the kernel before 2.6.30 final, so that glibc's kernel version feature test for these syscalls doesn't have to special-case ARM. Signed-off-by: Mikael Pettersson Signed-off-by: Russell King --- arch/arm/include/asm/unistd.h | 2 ++ arch/arm/kernel/calls.S | 2 ++ 2 files changed, 4 insertions(+) diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h index 010618487cf..94cc58ef61a 100644 --- a/arch/arm/include/asm/unistd.h +++ b/arch/arm/include/asm/unistd.h @@ -387,6 +387,8 @@ #define __NR_dup3 (__NR_SYSCALL_BASE+358) #define __NR_pipe2 (__NR_SYSCALL_BASE+359) #define __NR_inotify_init1 (__NR_SYSCALL_BASE+360) +#define __NR_preadv (__NR_SYSCALL_BASE+361) +#define __NR_pwritev (__NR_SYSCALL_BASE+362) /* * The following SWIs are ARM private. diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S index 9ca8d13f05f..1680e9e9c83 100644 --- a/arch/arm/kernel/calls.S +++ b/arch/arm/kernel/calls.S @@ -370,6 +370,8 @@ CALL(sys_dup3) CALL(sys_pipe2) /* 360 */ CALL(sys_inotify_init1) + CALL(sys_preadv) + CALL(sys_pwritev) #ifndef syscalls_counted .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls #define syscalls_counted -- cgit v1.2.3 From 4a014a240b5a3c3b167702948a22dbe9e9a150a8 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Mon, 20 Apr 2009 03:33:09 +0100 Subject: [ARM] 5457/1: mach-imx gpio buildfix From: David Brownell Fix GPIO-related build error on mach-imx platform: CC drivers/spi/spi_gpio.o In file included from /home/db/kernel/scratch/arch/arm/include/asm/gpio.h:5, from include/linux/gpio.h:7, from drivers/spi/spi_gpio.c:23: arch/arm/mach-imx/include/mach/gpio.h: In function 'imx_gpio_get_value': arch/arm/mach-imx/include/mach/gpio.h:27: error: implicit declaration of function '__REG2' arch/arm/mach-imx/include/mach/gpio.h:27: error: 'IMX_IO_BASE' undeclared (first use in this function) arch/arm/mach-imx/include/mach/gpio.h:27: error: (Each undeclared identifier is reported only once arch/arm/mach-imx/include/mach/gpio.h:27: error: for each function it appears in.) arch/arm/mach-imx/include/mach/gpio.h: In function 'imx_gpio_set_value_inline': arch/arm/mach-imx/include/mach/gpio.h:36: error: 'IMX_IO_BASE' undeclared (first use in this function) arch/arm/mach-imx/include/mach/gpio.h:36: error: lvalue required as left operand of assignment arch/arm/mach-imx/include/mach/gpio.h:38: error: lvalue required as left operand of assignment ... Signed-off-by: David Brownell Signed-off-by: Russell King --- arch/arm/mach-imx/include/mach/gpio.h | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-imx/include/mach/gpio.h b/arch/arm/mach-imx/include/mach/gpio.h index 502d5aa2c09..6c2942f8292 100644 --- a/arch/arm/mach-imx/include/mach/gpio.h +++ b/arch/arm/mach-imx/include/mach/gpio.h @@ -1,6 +1,7 @@ #ifndef _IMX_GPIO_H #include +#include #include #define IMX_GPIO_ALLOC_MODE_NORMAL 0 -- cgit v1.2.3 From 8db70d3deee33e661d091b3e317fccc87bf0975d Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Mon, 20 Apr 2009 11:33:12 -0600 Subject: powerpc/5200: defconfig updates Signed-off-by: Grant Likely --- arch/powerpc/configs/52xx/cm5200_defconfig | 69 +++++++--- arch/powerpc/configs/52xx/lite5200b_defconfig | 74 +++++++--- arch/powerpc/configs/52xx/motionpro_defconfig | 77 ++++++++--- arch/powerpc/configs/52xx/pcm030_defconfig | 69 +++++++--- arch/powerpc/configs/52xx/tqm5200_defconfig | 76 ++++++++--- arch/powerpc/configs/mpc5200_defconfig | 188 +++++++++++++++++++++----- 6 files changed, 428 insertions(+), 125 deletions(-) diff --git a/arch/powerpc/configs/52xx/cm5200_defconfig b/arch/powerpc/configs/52xx/cm5200_defconfig index 1239c6132b4..3838b77b811 100644 --- a/arch/powerpc/configs/52xx/cm5200_defconfig +++ b/arch/powerpc/configs/52xx/cm5200_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 21:41:58 2009 +# Linux kernel version: 2.6.30-rc2 +# Sat Apr 18 00:47:44 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y @@ -54,6 +55,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -94,19 +96,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y # CONFIG_SYSCTL_SYSCALL is not set # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -115,10 +120,12 @@ CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -126,6 +133,7 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -133,7 +141,6 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -154,8 +161,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -163,6 +168,7 @@ CONFIG_PPC_MPC52xx=y CONFIG_PPC_MPC5200_SIMPLE=y # CONFIG_PPC_EFIKA is not set # CONFIG_PPC_LITE5200 is not set +# CONFIG_PPC_MEDIA5200 is not set # CONFIG_PPC_MPC5200_BUGFIX is not set # CONFIG_PPC_MPC5200_GPIO is not set # CONFIG_PPC_PMAC is not set @@ -173,6 +179,8 @@ CONFIG_PPC_MPC5200_SIMPLE=y # CONFIG_PPC_83xx is not set # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_IPIC is not set # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -232,9 +240,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -275,7 +286,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -331,6 +341,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -343,7 +354,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set @@ -440,7 +450,6 @@ CONFIG_MTD_PHYSMAP_OF=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -505,10 +514,12 @@ CONFIG_CHR_DEV_SG=y # CONFIG_SCSI_SRP_ATTRS is not set # CONFIG_SCSI_LOWLEVEL is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -537,6 +548,8 @@ CONFIG_LXT_PHY=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y # CONFIG_MII is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -555,7 +568,6 @@ CONFIG_FEC_MPC52xx_MDIO=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -657,7 +669,6 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -786,11 +797,11 @@ CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -831,7 +842,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -846,6 +856,7 @@ CONFIG_USB_STORAGE=y # # OTG and related infrastructure # +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -853,6 +864,7 @@ CONFIG_USB_STORAGE=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -863,6 +875,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -884,6 +897,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -941,6 +959,7 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -953,7 +972,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1024,6 +1042,7 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1039,11 +1058,12 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1061,6 +1081,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1089,9 +1112,12 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1099,17 +1125,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1140,10 +1168,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set @@ -1211,6 +1241,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/52xx/lite5200b_defconfig b/arch/powerpc/configs/52xx/lite5200b_defconfig index b7b88056290..29b0f34488f 100644 --- a/arch/powerpc/configs/52xx/lite5200b_defconfig +++ b/arch/powerpc/configs/52xx/lite5200b_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 21:41:14 2009 +# Linux kernel version: 2.6.30-rc2 +# Sat Apr 18 00:48:04 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y @@ -55,6 +56,7 @@ CONFIG_DEFAULT_UIMAGE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -95,19 +97,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y # CONFIG_SYSCTL_SYSCALL is not set # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -117,10 +122,12 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -128,6 +135,7 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -140,7 +148,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -161,8 +168,6 @@ CONFIG_FREEZER=y # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -170,6 +175,7 @@ CONFIG_PPC_MPC52xx=y CONFIG_PPC_MPC5200_SIMPLE=y # CONFIG_PPC_EFIKA is not set CONFIG_PPC_LITE5200=y +# CONFIG_PPC_MEDIA5200 is not set # CONFIG_PPC_MPC5200_BUGFIX is not set # CONFIG_PPC_MPC5200_GPIO is not set # CONFIG_PPC_PMAC is not set @@ -180,6 +186,8 @@ CONFIG_PPC_LITE5200=y # CONFIG_PPC_83xx is not set # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_IPIC is not set # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -241,9 +249,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -272,6 +283,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -294,7 +306,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -350,6 +361,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -362,7 +374,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set @@ -412,6 +423,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set # @@ -477,9 +489,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -502,6 +516,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -578,6 +593,7 @@ CONFIG_PATA_MPC52xx=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -611,6 +627,8 @@ CONFIG_NET_ETHERNET=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -632,6 +650,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -642,10 +661,10 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set -# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -655,6 +674,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -664,6 +684,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -671,7 +692,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -795,7 +815,6 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -876,7 +895,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set @@ -892,6 +911,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -902,6 +922,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -923,6 +944,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -966,6 +992,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -978,7 +1005,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -994,6 +1020,7 @@ CONFIG_RPCSEC_GSS_KRB5=y CONFIG_MSDOS_PARTITION=y # CONFIG_NLS is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1007,11 +1034,13 @@ CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set -CONFIG_PLIST=y +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1029,6 +1058,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1057,9 +1089,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1067,17 +1102,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1108,10 +1145,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1180,6 +1219,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/52xx/motionpro_defconfig b/arch/powerpc/configs/52xx/motionpro_defconfig index fb10f22fd0d..07b6b266ea9 100644 --- a/arch/powerpc/configs/52xx/motionpro_defconfig +++ b/arch/powerpc/configs/52xx/motionpro_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 21:42:29 2009 +# Linux kernel version: 2.6.30-rc2 +# Sat Apr 18 00:48:22 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y @@ -54,6 +55,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -94,19 +96,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y # CONFIG_SYSCTL_SYSCALL is not set # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -115,10 +120,12 @@ CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -126,6 +133,7 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -133,7 +141,6 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -154,8 +161,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -163,6 +168,7 @@ CONFIG_PPC_MPC52xx=y CONFIG_PPC_MPC5200_SIMPLE=y # CONFIG_PPC_EFIKA is not set # CONFIG_PPC_LITE5200 is not set +# CONFIG_PPC_MEDIA5200 is not set # CONFIG_PPC_MPC5200_BUGFIX is not set # CONFIG_PPC_MPC5200_GPIO is not set # CONFIG_PPC_PMAC is not set @@ -173,6 +179,8 @@ CONFIG_PPC_MPC5200_SIMPLE=y # CONFIG_PPC_83xx is not set # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_IPIC is not set # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -233,9 +241,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -276,7 +287,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -332,6 +342,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -344,7 +355,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set @@ -441,7 +451,6 @@ CONFIG_MTD_ROM=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -466,6 +475,7 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 CONFIG_MISC_DEVICES=y # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set # @@ -516,8 +526,10 @@ CONFIG_CHR_DEV_SG=y CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -528,6 +540,7 @@ CONFIG_PATA_MPC52xx=y # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -556,6 +569,8 @@ CONFIG_ICPLUS_PHY=y CONFIG_MDIO_BITBANG=y CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -574,7 +589,6 @@ CONFIG_FEC_MPC52xx_MDIO=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -665,7 +679,6 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -696,6 +709,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -710,11 +724,14 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set @@ -800,7 +817,9 @@ CONFIG_LEDS_CLASS=y # # LED drivers # +# CONFIG_LEDS_LP5521 is not set # CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_BD2802 is not set # # LED Triggers @@ -810,6 +829,10 @@ CONFIG_LEDS_TRIGGER_TIMER=y # CONFIG_LEDS_TRIGGER_HEARTBEAT is not set # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set # CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set + +# +# iptables trigger is under Netfilter config (LED target) +# # CONFIG_ACCESSIBILITY is not set # CONFIG_EDAC is not set CONFIG_RTC_LIB=y @@ -866,8 +889,9 @@ CONFIG_RTC_DRV_DS1307=y # # on-CPU RTC drivers # -# CONFIG_RTC_DRV_PPC is not set +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -878,6 +902,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -899,6 +924,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -956,6 +986,7 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -968,7 +999,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1039,6 +1069,7 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1054,11 +1085,12 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1076,6 +1108,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1104,9 +1139,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1114,17 +1152,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1155,10 +1195,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set @@ -1226,6 +1268,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/52xx/pcm030_defconfig b/arch/powerpc/configs/52xx/pcm030_defconfig index 00944c09a0a..afb1a3d1ef0 100644 --- a/arch/powerpc/configs/52xx/pcm030_defconfig +++ b/arch/powerpc/configs/52xx/pcm030_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 21:41:33 2009 +# Linux kernel version: 2.6.30-rc2 +# Sat Apr 18 00:48:42 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y @@ -54,6 +55,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -69,6 +71,7 @@ CONFIG_LOCALVERSION="trunk" CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set @@ -97,18 +100,18 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -117,10 +120,12 @@ CONFIG_SHMEM=y CONFIG_AIO=y # CONFIG_VM_EVENT_COUNTERS is not set CONFIG_PCI_QUIRKS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -129,6 +134,7 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -141,7 +147,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -162,8 +167,6 @@ CONFIG_DEFAULT_IOSCHED="noop" # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -171,6 +174,7 @@ CONFIG_PPC_MPC52xx=y CONFIG_PPC_MPC5200_SIMPLE=y # CONFIG_PPC_EFIKA is not set # CONFIG_PPC_LITE5200 is not set +# CONFIG_PPC_MEDIA5200 is not set # CONFIG_PPC_MPC5200_BUGFIX is not set # CONFIG_PPC_MPC5200_GPIO is not set # CONFIG_PPC_PMAC is not set @@ -181,6 +185,8 @@ CONFIG_PPC_MPC5200_SIMPLE=y # CONFIG_PPC_83xx is not set # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_IPIC is not set # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -242,9 +248,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -268,6 +277,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set CONFIG_PCI_LEGACY=y # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -290,7 +300,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -340,6 +349,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -352,7 +362,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set @@ -451,7 +460,6 @@ CONFIG_MTD_PHYSMAP=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -504,6 +512,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set # CONFIG_SCSI_LOWLEVEL is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=m # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -580,6 +589,7 @@ CONFIG_PATA_MPC52xx=m # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -613,6 +623,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -636,7 +648,6 @@ CONFIG_FEC_MPC52xx_MDIO=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -702,6 +713,7 @@ CONFIG_UNIX98_PTYS=y # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_NVRAM is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -767,7 +779,6 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -889,11 +900,11 @@ CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set @@ -934,7 +945,6 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -949,6 +959,7 @@ CONFIG_USB_STORAGE=m # # OTG and related infrastructure # +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1007,8 +1018,9 @@ CONFIG_RTC_DRV_PCF8563=m # # on-CPU RTC drivers # -# CONFIG_RTC_DRV_PPC is not set +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1019,6 +1031,7 @@ CONFIG_EXT2_FS=m # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=m +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1039,6 +1052,11 @@ CONFIG_FILE_LOCKING=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1096,6 +1114,7 @@ CONFIG_JFFS2_RTIME=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1107,7 +1126,6 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1162,6 +1180,7 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1177,11 +1196,11 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1200,13 +1219,25 @@ CONFIG_FRAME_WARN=1024 # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers # -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_PRINT_STACK_DEPTH=64 diff --git a/arch/powerpc/configs/52xx/tqm5200_defconfig b/arch/powerpc/configs/52xx/tqm5200_defconfig index 65237ad6f07..8585c7c1286 100644 --- a/arch/powerpc/configs/52xx/tqm5200_defconfig +++ b/arch/powerpc/configs/52xx/tqm5200_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 21:42:58 2009 +# Linux kernel version: 2.6.30-rc2 +# Sat Apr 18 00:48:57 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y @@ -54,6 +55,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -94,19 +96,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y # CONFIG_SYSCTL_SYSCALL is not set # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -115,10 +120,12 @@ CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -126,6 +133,7 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -138,7 +146,6 @@ CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -159,8 +166,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -168,6 +173,7 @@ CONFIG_PPC_MPC52xx=y CONFIG_PPC_MPC5200_SIMPLE=y # CONFIG_PPC_EFIKA is not set # CONFIG_PPC_LITE5200 is not set +# CONFIG_PPC_MEDIA5200 is not set CONFIG_PPC_MPC5200_BUGFIX=y # CONFIG_PPC_MPC5200_GPIO is not set # CONFIG_PPC_PMAC is not set @@ -178,6 +184,8 @@ CONFIG_PPC_MPC5200_BUGFIX=y # CONFIG_PPC_83xx is not set # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_IPIC is not set # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -238,9 +246,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -281,7 +292,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -337,6 +347,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -349,7 +360,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set @@ -447,7 +457,6 @@ CONFIG_MTD_PHYSMAP_OF=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -514,8 +523,10 @@ CONFIG_SCSI_WAIT_SCAN=m CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -527,6 +538,7 @@ CONFIG_PATA_PLATFORM=y # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -555,6 +567,8 @@ CONFIG_LXT_PHY=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y # CONFIG_MII is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -573,7 +587,6 @@ CONFIG_FEC_MPC52xx_MDIO=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -675,7 +688,6 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -706,6 +718,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -720,11 +733,14 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set @@ -857,11 +873,11 @@ CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -902,7 +918,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -917,6 +932,7 @@ CONFIG_USB_STORAGE=y # # OTG and related infrastructure # +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -976,8 +992,9 @@ CONFIG_RTC_DRV_DS1307=y # # on-CPU RTC drivers # -# CONFIG_RTC_DRV_PPC is not set +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -988,6 +1005,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1009,6 +1027,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1066,6 +1089,7 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1078,7 +1102,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1149,6 +1172,7 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1164,11 +1188,12 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1186,6 +1211,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1214,9 +1242,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1224,17 +1255,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1265,10 +1298,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1337,6 +1372,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # diff --git a/arch/powerpc/configs/mpc5200_defconfig b/arch/powerpc/configs/mpc5200_defconfig index af0cd55605d..aaa4416660e 100644 --- a/arch/powerpc/configs/mpc5200_defconfig +++ b/arch/powerpc/configs/mpc5200_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc3 -# Fri Feb 6 09:48:53 2009 +# Linux kernel version: 2.6.30-rc2 +# Mon Apr 20 11:06:25 2009 # # CONFIG_PPC64 is not set @@ -14,6 +14,7 @@ CONFIG_6xx=y # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y CONFIG_PPC_FPU=y # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y @@ -39,6 +40,7 @@ CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_GPIO=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y CONFIG_EARLY_PRINTK=y @@ -55,6 +57,7 @@ CONFIG_DEFAULT_UIMAGE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -91,19 +94,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y # CONFIG_SYSCTL_SYSCALL is not set # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -113,10 +119,12 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -124,6 +132,7 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -136,7 +145,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -157,8 +165,6 @@ CONFIG_FREEZER=y # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -CONFIG_CLASSIC32=y # CONFIG_PPC_CHRP is not set # CONFIG_MPC5121_ADS is not set # CONFIG_MPC5121_GENERIC is not set @@ -166,8 +172,9 @@ CONFIG_PPC_MPC52xx=y CONFIG_PPC_MPC5200_SIMPLE=y CONFIG_PPC_EFIKA=y CONFIG_PPC_LITE5200=y +CONFIG_PPC_MEDIA5200=y CONFIG_PPC_MPC5200_BUGFIX=y -# CONFIG_PPC_MPC5200_GPIO is not set +CONFIG_PPC_MPC5200_GPIO=y # CONFIG_PPC_PMAC is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set @@ -176,7 +183,9 @@ CONFIG_PPC_MPC5200_BUGFIX=y # CONFIG_PPC_83xx is not set # CONFIG_PPC_86xx is not set # CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set CONFIG_PPC_NATIVE=y +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_UDBG_RTAS_CONSOLE is not set # CONFIG_IPIC is not set # CONFIG_MPIC is not set @@ -241,9 +250,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -272,6 +284,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -294,7 +307,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -350,6 +362,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -362,7 +375,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set @@ -388,12 +400,9 @@ CONFIG_MTD=y CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_TESTS is not set -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 -# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set -# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set +# CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y -# CONFIG_MTD_OF_PARTS is not set +CONFIG_MTD_OF_PARTS=y # CONFIG_MTD_AR7_PARTS is not set # @@ -447,6 +456,8 @@ CONFIG_MTD_PHYSMAP_OF=y # Self-contained MTD device drivers # # CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -465,14 +476,23 @@ CONFIG_MTD_PHYSMAP_OF=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images # -# CONFIG_MTD_UBI is not set +CONFIG_MTD_UBI=m +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MTD_UBI_BEB_RESERVE=1 +# CONFIG_MTD_UBI_GLUEBI is not set + +# +# UBI debugging options +# +# CONFIG_MTD_UBI_DEBUG is not set CONFIG_OF_DEVICE=y +CONFIG_OF_GPIO=y CONFIG_OF_I2C=y +CONFIG_OF_SPI=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -500,12 +520,14 @@ CONFIG_MISC_DEVICES=y # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set # # EEPROM support # CONFIG_EEPROM_AT24=y +# CONFIG_EEPROM_AT25 is not set # CONFIG_EEPROM_LEGACY is not set # CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y @@ -564,9 +586,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -589,6 +613,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -666,6 +691,7 @@ CONFIG_PATA_PLATFORM=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -699,6 +725,9 @@ CONFIG_NET_ETHERNET=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -722,7 +751,6 @@ CONFIG_FEC_MPC52xx_MDIO=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -802,6 +830,7 @@ CONFIG_DEVKMEM=y # # Non-8250 serial port support # +# CONFIG_SERIAL_MAX3100 is not set # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y @@ -854,6 +883,7 @@ CONFIG_I2C_ALGOBIT=y # # I2C system bus drivers (mostly embedded / system-on-chip) # +# CONFIG_I2C_GPIO is not set CONFIG_I2C_MPC=y # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set @@ -883,22 +913,63 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set -# CONFIG_SPI is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_GPIO is not set +CONFIG_SPI_MPC52xx_PSC=m + +# +# SPI Protocol Masters +# +CONFIG_SPI_SPIDEV=m +# CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y -# CONFIG_GPIOLIB is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# +# CONFIG_GPIO_XILINX is not set + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# +# CONFIG_GPIO_BT8XX is not set + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADCXX is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set @@ -915,10 +986,12 @@ CONFIG_HWMON=y # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM70 is not set # CONFIG_SENSORS_LM75 is not set # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set @@ -929,11 +1002,16 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set +# CONFIG_SENSORS_MAX1111 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -952,6 +1030,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_LIS3_SPI is not set # CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set @@ -989,6 +1068,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set @@ -1084,9 +1164,13 @@ CONFIG_FB_RADEON_BACKLIGHT=y # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=m +# CONFIG_LCD_LTV350QV is not set # CONFIG_LCD_ILI9320 is not set +# CONFIG_LCD_TDO24M is not set +# CONFIG_LCD_VGG2432A4 is not set # CONFIG_LCD_PLATFORM is not set CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_BACKLIGHT_GENERIC=y @@ -1127,15 +1211,17 @@ CONFIG_USB_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y # CONFIG_HID_APPLE is not set CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y # CONFIG_HID_CHICONY is not set CONFIG_HID_CYPRESS=y +# CONFIG_DRAGONRISE_FF is not set CONFIG_HID_EZKEY=y +# CONFIG_HID_KYE is not set # CONFIG_HID_GYRATION is not set +# CONFIG_HID_KENSINGTON is not set # CONFIG_HID_LOGITECH is not set # CONFIG_HID_MICROSOFT is not set # CONFIG_HID_MONTEREY is not set @@ -1204,11 +1290,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -1250,7 +1336,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1265,6 +1350,8 @@ CONFIG_USB_STORAGE=y # # OTG and related infrastructure # +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1317,6 +1404,13 @@ CONFIG_RTC_DRV_DS1307=y # # SPI RTC drivers # +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set # # Platform RTC drivers @@ -1336,8 +1430,9 @@ CONFIG_RTC_DRV_DS1307=y # # on-CPU RTC drivers # -# CONFIG_RTC_DRV_PPC is not set +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1348,6 +1443,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1369,6 +1465,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1416,6 +1517,12 @@ CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set +CONFIG_UBIFS_FS=m +# CONFIG_UBIFS_FS_XATTR is not set +# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set +CONFIG_UBIFS_FS_LZO=y +CONFIG_UBIFS_FS_ZLIB=y +# CONFIG_UBIFS_FS_DEBUG is not set CONFIG_CRAMFS=y # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -1426,6 +1533,7 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1438,7 +1546,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1493,6 +1600,7 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1500,7 +1608,7 @@ CONFIG_NLS_ISO8859_1=y CONFIG_BITREVERSE=y CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set +CONFIG_CRC16=m # CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y @@ -1508,11 +1616,14 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_LZO_COMPRESS=m +CONFIG_LZO_DECOMPRESS=m +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1530,6 +1641,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1558,9 +1672,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1568,17 +1685,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1609,10 +1728,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1680,8 +1801,9 @@ CONFIG_CRYPTO_DES=y # # Compression # -# CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_DEFLATE=m +# CONFIG_CRYPTO_ZLIB is not set +CONFIG_CRYPTO_LZO=m # # Random Number Generation -- cgit v1.2.3 From 6d25b688ecc488753af3c9e6f6a9a575b863cf37 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ilpo=20J=C3=A4rvinen?= Date: Mon, 20 Apr 2009 12:18:43 -0600 Subject: powerpc: Fix of_node_put() exit path in of_irq_map_one() Signed-off-by: Grant Likely --- arch/powerpc/kernel/prom_parse.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) diff --git a/arch/powerpc/kernel/prom_parse.c b/arch/powerpc/kernel/prom_parse.c index 8f0856f312d..8362620c9e6 100644 --- a/arch/powerpc/kernel/prom_parse.c +++ b/arch/powerpc/kernel/prom_parse.c @@ -971,7 +971,7 @@ int of_irq_map_one(struct device_node *device, int index, struct of_irq *out_irq struct device_node *p; const u32 *intspec, *tmp, *addr; u32 intsize, intlen; - int res; + int res = -EINVAL; DBG("of_irq_map_one: dev=%s, index=%d\n", device->full_name, index); @@ -995,21 +995,20 @@ int of_irq_map_one(struct device_node *device, int index, struct of_irq *out_irq /* Get size of interrupt specifier */ tmp = of_get_property(p, "#interrupt-cells", NULL); - if (tmp == NULL) { - of_node_put(p); - return -EINVAL; - } + if (tmp == NULL) + goto out; intsize = *tmp; DBG(" intsize=%d intlen=%d\n", intsize, intlen); /* Check index */ if ((index + 1) * intsize > intlen) - return -EINVAL; + goto out; /* Get new specifier and map it */ res = of_irq_map_raw(p, intspec + index * intsize, intsize, addr, out_irq); +out: of_node_put(p); return res; } -- cgit v1.2.3 From 499a214ca2765522d6a59ff73825d40e7bb31510 Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Sat, 28 Mar 2009 20:51:58 +0100 Subject: rt2x00: Don't free register information on suspend After suspend & resume the rt2x00 devices won't wakeup anymore due to a broken register information setup. The most important problem is the release of the EEPROM buffer which is completely cleared and never read again after the suspend. Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00pci.c | 18 +----------------- drivers/net/wireless/rt2x00/rt2x00usb.c | 18 +----------------- 2 files changed, 2 insertions(+), 34 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.c b/drivers/net/wireless/rt2x00/rt2x00pci.c index 43fa0f84900..9730b4f8fd2 100644 --- a/drivers/net/wireless/rt2x00/rt2x00pci.c +++ b/drivers/net/wireless/rt2x00/rt2x00pci.c @@ -369,8 +369,6 @@ int rt2x00pci_suspend(struct pci_dev *pci_dev, pm_message_t state) if (retval) return retval; - rt2x00pci_free_reg(rt2x00dev); - pci_save_state(pci_dev); pci_disable_device(pci_dev); return pci_set_power_state(pci_dev, pci_choose_state(pci_dev, state)); @@ -381,7 +379,6 @@ int rt2x00pci_resume(struct pci_dev *pci_dev) { struct ieee80211_hw *hw = pci_get_drvdata(pci_dev); struct rt2x00_dev *rt2x00dev = hw->priv; - int retval; if (pci_set_power_state(pci_dev, PCI_D0) || pci_enable_device(pci_dev) || @@ -390,20 +387,7 @@ int rt2x00pci_resume(struct pci_dev *pci_dev) return -EIO; } - retval = rt2x00pci_alloc_reg(rt2x00dev); - if (retval) - return retval; - - retval = rt2x00lib_resume(rt2x00dev); - if (retval) - goto exit_free_reg; - - return 0; - -exit_free_reg: - rt2x00pci_free_reg(rt2x00dev); - - return retval; + return rt2x00lib_resume(rt2x00dev); } EXPORT_SYMBOL_GPL(rt2x00pci_resume); #endif /* CONFIG_PM */ diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c index 7d50ca82375..501544882c2 100644 --- a/drivers/net/wireless/rt2x00/rt2x00usb.c +++ b/drivers/net/wireless/rt2x00/rt2x00usb.c @@ -702,8 +702,6 @@ int rt2x00usb_suspend(struct usb_interface *usb_intf, pm_message_t state) if (retval) return retval; - rt2x00usb_free_reg(rt2x00dev); - /* * Decrease usbdev refcount. */ @@ -717,24 +715,10 @@ int rt2x00usb_resume(struct usb_interface *usb_intf) { struct ieee80211_hw *hw = usb_get_intfdata(usb_intf); struct rt2x00_dev *rt2x00dev = hw->priv; - int retval; usb_get_dev(interface_to_usbdev(usb_intf)); - retval = rt2x00usb_alloc_reg(rt2x00dev); - if (retval) - return retval; - - retval = rt2x00lib_resume(rt2x00dev); - if (retval) - goto exit_free_reg; - - return 0; - -exit_free_reg: - rt2x00usb_free_reg(rt2x00dev); - - return retval; + return rt2x00lib_resume(rt2x00dev); } EXPORT_SYMBOL_GPL(rt2x00usb_resume); #endif /* CONFIG_PM */ -- cgit v1.2.3 From 125143966f02bd7366eb9040aa74392d19955da8 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Thu, 16 Apr 2009 16:23:26 -0700 Subject: iwl3945-base.c: Add missing space to debug print "not" is not printed without a space after %pM Signed-off-by: Joe Perches Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl3945-base.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index 8d738d75248..da61ecd6288 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -4075,7 +4075,7 @@ static int iwl3945_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, if (!static_key) { sta_id = iwl3945_hw_find_station(priv, addr); if (sta_id == IWL_INVALID_STATION) { - IWL_DEBUG_MAC80211(priv, "leave - %pMnot in station map.\n", + IWL_DEBUG_MAC80211(priv, "leave - %pM not in station map.\n", addr); return -EINVAL; } -- cgit v1.2.3 From c3b93c878d7912a01467890bc0785071c2dc4bc1 Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Fri, 17 Apr 2009 15:14:22 +0200 Subject: p54: deactivate broken powersave function This patch deactivates powersave in station mode. It does not work correctly yet, so the code does more harm than good. Reported-by: Johannes Berg Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville --- drivers/net/wireless/p54/p54common.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c index 0c1b0577d4e..c8f0232ee5e 100644 --- a/drivers/net/wireless/p54/p54common.c +++ b/drivers/net/wireless/p54/p54common.c @@ -2543,8 +2543,6 @@ struct ieee80211_hw *p54_init_common(size_t priv_data_len) priv->basic_rate_mask = 0x15f; skb_queue_head_init(&priv->tx_queue); dev->flags = IEEE80211_HW_RX_INCLUDES_FCS | - IEEE80211_HW_SUPPORTS_PS | - IEEE80211_HW_PS_NULLFUNC_STACK | IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_NOISE_DBM; -- cgit v1.2.3 From 230f7af0d8f6f2019e64920378b3b66e7d3e99a5 Mon Sep 17 00:00:00 2001 From: Joerg Albert Date: Sat, 18 Apr 2009 02:10:45 +0200 Subject: mwl8k: fix module re-insertion bug swap mwl8k_remove and mwl8k_shutdown functions to allow "rmmod mwl8k; modprobe mwl8k" Signed-off-by: Joerg Albert Signed-off-by: John W. Linville --- drivers/net/wireless/mwl8k.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c index 57a0268d1ba..b5dbf6d9e51 100644 --- a/drivers/net/wireless/mwl8k.c +++ b/drivers/net/wireless/mwl8k.c @@ -3720,12 +3720,12 @@ err_free_reg: return rc; } -static void __devexit mwl8k_remove(struct pci_dev *pdev) +static void __devexit mwl8k_shutdown(struct pci_dev *pdev) { printk(KERN_ERR "===>%s(%u)\n", __func__, __LINE__); } -static void __devexit mwl8k_shutdown(struct pci_dev *pdev) +static void __devexit mwl8k_remove(struct pci_dev *pdev) { struct ieee80211_hw *hw = pci_get_drvdata(pdev); struct mwl8k_priv *priv; -- cgit v1.2.3 From 18aaab15f9a9cd4f20dc596aa38408c5e5d208ed Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Sat, 18 Apr 2009 09:33:55 -0400 Subject: MAC80211: Remove unused MAC80211_VERBOSE_SPECT_MGMT_DEBUG. Remove this unused Kconfig variable, which Intel apparently once promised to make use of but never did. Signed-off-by: Robert P. J. Day Acked-by: Johannes Berg Signed-off-by: John W. Linville --- net/mac80211/Kconfig | 7 ------- 1 file changed, 7 deletions(-) diff --git a/net/mac80211/Kconfig b/net/mac80211/Kconfig index f3d9ae350fb..ecc3faf9f11 100644 --- a/net/mac80211/Kconfig +++ b/net/mac80211/Kconfig @@ -202,10 +202,3 @@ config MAC80211_DEBUG_COUNTERS and show them in debugfs. If unsure, say N. - -config MAC80211_VERBOSE_SPECT_MGMT_DEBUG - bool "Verbose Spectrum Management (IEEE 802.11h)debugging" - depends on MAC80211_DEBUG_MENU - ---help--- - Say Y here to print out verbose Spectrum Management (IEEE 802.11h) - debug messages. -- cgit v1.2.3 From e10a9dfc35ae6bd62bbb83df08297ea06b54d9ce Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Sat, 18 Apr 2009 17:12:18 +0200 Subject: ar9170usb: fix hang on resume This patch fixes a hang on resume when the filesystem is not available and request_firmware blocks. However, the device does not accept the firmware on resume. and it will exit with: > firmware part 1 upload failed (-71). > device is in a bad state. please reconnect it! Reported-by: Johannes Berg Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville --- drivers/net/wireless/ar9170/usb.c | 110 +++++++++++++++++++++++++++++++------- 1 file changed, 90 insertions(+), 20 deletions(-) diff --git a/drivers/net/wireless/ar9170/usb.c b/drivers/net/wireless/ar9170/usb.c index c9e422ead92..fddda477095 100644 --- a/drivers/net/wireless/ar9170/usb.c +++ b/drivers/net/wireless/ar9170/usb.c @@ -623,6 +623,39 @@ static int ar9170_usb_open(struct ar9170 *ar) return 0; } +static int ar9170_usb_init_device(struct ar9170_usb *aru) +{ + int err; + + err = ar9170_usb_alloc_rx_irq_urb(aru); + if (err) + goto err_out; + + err = ar9170_usb_alloc_rx_bulk_urbs(aru); + if (err) + goto err_unrx; + + err = ar9170_usb_upload_firmware(aru); + if (err) { + err = ar9170_echo_test(&aru->common, 0x60d43110); + if (err) { + /* force user invention, by disabling the device */ + err = usb_driver_set_configuration(aru->udev, -1); + dev_err(&aru->udev->dev, "device is in a bad state. " + "please reconnect it!\n"); + goto err_unrx; + } + } + + return 0; + +err_unrx: + ar9170_usb_cancel_urbs(aru); + +err_out: + return err; +} + static int ar9170_usb_probe(struct usb_interface *intf, const struct usb_device_id *id) { @@ -658,32 +691,16 @@ static int ar9170_usb_probe(struct usb_interface *intf, err = ar9170_usb_reset(aru); if (err) - goto err_unlock; + goto err_freehw; err = ar9170_usb_request_firmware(aru); if (err) - goto err_unlock; + goto err_freehw; - err = ar9170_usb_alloc_rx_irq_urb(aru); + err = ar9170_usb_init_device(aru); if (err) goto err_freefw; - err = ar9170_usb_alloc_rx_bulk_urbs(aru); - if (err) - goto err_unrx; - - err = ar9170_usb_upload_firmware(aru); - if (err) { - err = ar9170_echo_test(&aru->common, 0x60d43110); - if (err) { - /* force user invention, by disabling the device */ - err = usb_driver_set_configuration(aru->udev, -1); - dev_err(&aru->udev->dev, "device is in a bad state. " - "please reconnect it!\n"); - goto err_unrx; - } - } - err = ar9170_usb_open(ar); if (err) goto err_unrx; @@ -703,7 +720,7 @@ err_freefw: release_firmware(aru->init_values); release_firmware(aru->firmware); -err_unlock: +err_freehw: usb_set_intfdata(intf, NULL); usb_put_dev(udev); ieee80211_free_hw(ar->hw); @@ -730,12 +747,65 @@ static void ar9170_usb_disconnect(struct usb_interface *intf) ieee80211_free_hw(aru->common.hw); } +#ifdef CONFIG_PM +static int ar9170_suspend(struct usb_interface *intf, + pm_message_t message) +{ + struct ar9170_usb *aru = usb_get_intfdata(intf); + + if (!aru) + return -ENODEV; + + aru->common.state = AR9170_IDLE; + ar9170_usb_cancel_urbs(aru); + + return 0; +} + +static int ar9170_resume(struct usb_interface *intf) +{ + struct ar9170_usb *aru = usb_get_intfdata(intf); + int err; + + if (!aru) + return -ENODEV; + + usb_unpoison_anchored_urbs(&aru->rx_submitted); + usb_unpoison_anchored_urbs(&aru->tx_submitted); + + /* + * FIXME: firmware upload will fail on resume. + * but this is better than a hang! + */ + + err = ar9170_usb_init_device(aru); + if (err) + goto err_unrx; + + err = ar9170_usb_open(&aru->common); + if (err) + goto err_unrx; + + return 0; + +err_unrx: + aru->common.state = AR9170_IDLE; + ar9170_usb_cancel_urbs(aru); + + return err; +} +#endif /* CONFIG_PM */ + static struct usb_driver ar9170_driver = { .name = "ar9170usb", .probe = ar9170_usb_probe, .disconnect = ar9170_usb_disconnect, .id_table = ar9170_usb_ids, .soft_unbind = 1, +#ifdef CONFIG_PM + .suspend = ar9170_suspend, + .resume = ar9170_resume, +#endif /* CONFIG_PM */ }; static int __init ar9170_init(void) -- cgit v1.2.3 From d91c01c757bd9659ac10549504586fae610265a4 Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Sat, 18 Apr 2009 21:53:15 +0300 Subject: nl80211: Make nl80211_send_mlme_event() atomic One of the code paths sending deauth/disassoc events ends up calling this function with rcu_read_lock held, so we must use GFP_ATOMIC in allocation routines. Reported-by: Johannes Berg Signed-off-by: Jouni Malinen Signed-off-by: John W. Linville --- net/wireless/nl80211.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 353e1a4ece8..2456e4ee445 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -3334,7 +3334,7 @@ static void nl80211_send_mlme_event(struct cfg80211_registered_device *rdev, struct sk_buff *msg; void *hdr; - msg = nlmsg_new(NLMSG_GOODSIZE, GFP_KERNEL); + msg = nlmsg_new(NLMSG_GOODSIZE, GFP_ATOMIC); if (!msg) return; @@ -3353,7 +3353,7 @@ static void nl80211_send_mlme_event(struct cfg80211_registered_device *rdev, return; } - genlmsg_multicast(msg, 0, nl80211_mlme_mcgrp.id, GFP_KERNEL); + genlmsg_multicast(msg, 0, nl80211_mlme_mcgrp.id, GFP_ATOMIC); return; nla_put_failure: -- cgit v1.2.3 From ad935687dbe7307f5abd9e3f610a965a287324a9 Mon Sep 17 00:00:00 2001 From: Kalle Valo Date: Sun, 19 Apr 2009 08:47:19 +0300 Subject: mac80211: fix beacon loss detection after scan Currently beacon loss detection triggers after a scan. A probe request is sent and a message like this is printed to the log: wlan0: beacon loss from AP 00:12:17:e7:98:de - sending probe request But in fact there is no beacon loss, the beacons are just not received because of the ongoing scan. Fix it by updating last_beacon after the scan has finished. Reported-by: Jaswinder Singh Rajput Signed-off-by: Kalle Valo Acked-by: Johannes Berg Signed-off-by: John W. Linville --- net/mac80211/mlme.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 1619e0cd26e..ccfc21aa0b6 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1913,9 +1913,17 @@ static void ieee80211_sta_work(struct work_struct *work) static void ieee80211_restart_sta_timer(struct ieee80211_sub_if_data *sdata) { - if (sdata->vif.type == NL80211_IFTYPE_STATION) + if (sdata->vif.type == NL80211_IFTYPE_STATION) { + /* + * Need to update last_beacon to avoid beacon loss + * test to trigger. + */ + sdata->u.mgd.last_beacon = jiffies; + + queue_work(sdata->local->hw.workqueue, &sdata->u.mgd.work); + } } /* interface setup */ -- cgit v1.2.3 From 7e0986c17f695952ce5d61ed793ce048ba90a661 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Sun, 19 Apr 2009 13:22:11 +0200 Subject: mac80211: fix basic rate bitmap calculation "mac80211: fix basic rates setting from association response" introduced a copy/paste error. Unfortunately, this not just leads to wrong data being passed to the driver but is remotely exploitable for some hardware or driver combinations. Signed-off-by: Johannes Berg Cc: stable@kernel.org [2.6.29] Signed-off-by: John W. Linville --- net/mac80211/mlme.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index ccfc21aa0b6..132938b073d 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1366,7 +1366,7 @@ static void ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata, for (i = 0; i < elems.ext_supp_rates_len; i++) { int rate = (elems.ext_supp_rates[i] & 0x7f) * 5; - bool is_basic = !!(elems.supp_rates[i] & 0x80); + bool is_basic = !!(elems.ext_supp_rates[i] & 0x80); if (rate > 110) have_higher_than_11mbit = true; -- cgit v1.2.3 From 62cedd11f63c99efd2962fb69763a09e2778f6e6 Mon Sep 17 00:00:00 2001 From: Matt Carlson Date: Mon, 20 Apr 2009 14:52:29 -0700 Subject: tg3: Fix SEEPROM accesses The recent NVRAM patches sanitized how the driver deals with NVRAM data, but they failed to bring the SEEPROM interfaces inline with the new strategy. This patch brings the SEEPROM interfaces up to date. This patch also reverts commit 0d489ffb76de0fe804cf06a9d4d11fa7342d74b9 ("tg3: fix big endian MAC address collection failure"). Signed-off-by: Matt Carlson Signed-off-by: Michael Chan Tested-by: Robin Holt Tested-by: James Bottomley Signed-off-by: David S. Miller --- drivers/net/tg3.c | 26 +++++++++++++++++--------- 1 file changed, 17 insertions(+), 9 deletions(-) diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 7a837c46596..201be425643 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -2190,7 +2190,14 @@ static int tg3_nvram_read_using_eeprom(struct tg3 *tp, if (!(tmp & EEPROM_ADDR_COMPLETE)) return -EBUSY; - *val = tr32(GRC_EEPROM_DATA); + tmp = tr32(GRC_EEPROM_DATA); + + /* + * The data will always be opposite the native endian + * format. Perform a blind byteswap to compensate. + */ + *val = swab32(tmp); + return 0; } @@ -10663,7 +10670,13 @@ static int tg3_nvram_write_block_using_eeprom(struct tg3 *tp, memcpy(&data, buf + i, 4); - tw32(GRC_EEPROM_DATA, be32_to_cpu(data)); + /* + * The SEEPROM interface expects the data to always be opposite + * the native endian format. We accomplish this by reversing + * all the operations that would have been performed on the + * data from a call to tg3_nvram_read_be32(). + */ + tw32(GRC_EEPROM_DATA, swab32(be32_to_cpu(data))); val = tr32(GRC_EEPROM_ADDR); tw32(GRC_EEPROM_ADDR, val | EEPROM_ADDR_COMPLETE); @@ -12443,13 +12456,8 @@ static int __devinit tg3_get_device_address(struct tg3 *tp) /* Next, try NVRAM. */ if (!tg3_nvram_read_be32(tp, mac_offset + 0, &hi) && !tg3_nvram_read_be32(tp, mac_offset + 4, &lo)) { - dev->dev_addr[0] = ((hi >> 16) & 0xff); - dev->dev_addr[1] = ((hi >> 24) & 0xff); - dev->dev_addr[2] = ((lo >> 0) & 0xff); - dev->dev_addr[3] = ((lo >> 8) & 0xff); - dev->dev_addr[4] = ((lo >> 16) & 0xff); - dev->dev_addr[5] = ((lo >> 24) & 0xff); - + memcpy(&dev->dev_addr[0], ((char *)&hi) + 2, 2); + memcpy(&dev->dev_addr[2], (char *)&lo, sizeof(lo)); } /* Finally just fetch it out of the MAC control regs. */ else { -- cgit v1.2.3 From 88bea188b85f9cefefbbd56b8a48d0f798409177 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Tue, 21 Apr 2009 00:35:47 -0400 Subject: ACPI: add /sys/firmware/acpi/interrupts/sci_not counter This counter may prove useful in debugging some spurious interrupt issues seen in the field. Signed-off-by: Len Brown --- Documentation/ABI/testing/sysfs-firmware-acpi | 8 ++++++-- drivers/acpi/osl.c | 4 +++- drivers/acpi/system.c | 11 +++++++++-- include/linux/acpi.h | 1 + 4 files changed, 19 insertions(+), 5 deletions(-) diff --git a/Documentation/ABI/testing/sysfs-firmware-acpi b/Documentation/ABI/testing/sysfs-firmware-acpi index e8ffc70ffe1..4f9ba3c2fca 100644 --- a/Documentation/ABI/testing/sysfs-firmware-acpi +++ b/Documentation/ABI/testing/sysfs-firmware-acpi @@ -69,9 +69,13 @@ Description: gpe1F: 0 invalid gpe_all: 1192 sci: 1194 + sci_not: 0 - sci - The total number of times the ACPI SCI - has claimed an interrupt. + sci - The number of times the ACPI SCI + has been called and claimed an interrupt. + + sci_not - The number of times the ACPI SCI + has been called and NOT claimed an interrupt. gpe_all - count of SCI caused by GPEs. diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c index d59f08ecaf1..d916bea729f 100644 --- a/drivers/acpi/osl.c +++ b/drivers/acpi/osl.c @@ -353,8 +353,10 @@ static irqreturn_t acpi_irq(int irq, void *dev_id) if (handled) { acpi_irq_handled++; return IRQ_HANDLED; - } else + } else { + acpi_irq_not_handled++; return IRQ_NONE; + } } acpi_status diff --git a/drivers/acpi/system.c b/drivers/acpi/system.c index da51f05ef8d..0944daec064 100644 --- a/drivers/acpi/system.c +++ b/drivers/acpi/system.c @@ -38,6 +38,7 @@ ACPI_MODULE_NAME("system"); #define ACPI_SYSTEM_DEVICE_NAME "System" u32 acpi_irq_handled; +u32 acpi_irq_not_handled; /* * Make ACPICA version work as module param @@ -214,8 +215,9 @@ err: #define COUNT_GPE 0 #define COUNT_SCI 1 /* acpi_irq_handled */ -#define COUNT_ERROR 2 /* other */ -#define NUM_COUNTERS_EXTRA 3 +#define COUNT_SCI_NOT 2 /* acpi_irq_not_handled */ +#define COUNT_ERROR 3 /* other */ +#define NUM_COUNTERS_EXTRA 4 struct event_counter { u32 count; @@ -317,6 +319,8 @@ static ssize_t counter_show(struct kobject *kobj, all_counters[num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_SCI].count = acpi_irq_handled; + all_counters[num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_SCI_NOT].count = + acpi_irq_not_handled; all_counters[num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_GPE].count = acpi_gpe_count; @@ -363,6 +367,7 @@ static ssize_t counter_set(struct kobject *kobj, all_counters[i].count = 0; acpi_gpe_count = 0; acpi_irq_handled = 0; + acpi_irq_not_handled = 0; goto end; } @@ -456,6 +461,8 @@ void acpi_irq_stats_init(void) sprintf(buffer, "gpe_all"); else if (i == num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_SCI) sprintf(buffer, "sci"); + else if (i == num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_SCI_NOT) + sprintf(buffer, "sci_not"); else if (i == num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_ERROR) sprintf(buffer, "error"); else diff --git a/include/linux/acpi.h b/include/linux/acpi.h index 6586cbd0d4a..88be890ee3c 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -111,6 +111,7 @@ int acpi_register_ioapic(acpi_handle handle, u64 phys_addr, u32 gsi_base); int acpi_unregister_ioapic(acpi_handle handle, u32 gsi_base); void acpi_irq_stats_init(void); extern u32 acpi_irq_handled; +extern u32 acpi_irq_not_handled; extern struct acpi_mcfg_allocation *pci_mmcfg_config; extern int pci_mmcfg_config_num; -- cgit v1.2.3 From cfbf1eecd70db9a7a49c42a0613c00f7a2a86dfb Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Mon, 20 Apr 2009 22:54:25 +0200 Subject: ALSA: AOA: Convert onyx and tas codecs to new-style i2c drivers The legacy i2c binding model is going away soon, so convert the AOA codec drivers to the new model or they'll break. Signed-off-by: Jean Delvare Tested-by: Johannes Berg Tested-by: Andreas Schwab Cc: Benjamin Herrenschmidt Signed-off-by: Takashi Iwai --- sound/aoa/codecs/onyx.c | 76 ++++++++++++++++++++++++++++++++++--------------- sound/aoa/codecs/tas.c | 66 ++++++++++++++++++++++++++---------------- 2 files changed, 95 insertions(+), 47 deletions(-) diff --git a/sound/aoa/codecs/onyx.c b/sound/aoa/codecs/onyx.c index 15500b9d2da..84bb07d39a7 100644 --- a/sound/aoa/codecs/onyx.c +++ b/sound/aoa/codecs/onyx.c @@ -47,7 +47,7 @@ MODULE_DESCRIPTION("pcm3052 (onyx) codec driver for snd-aoa"); struct onyx { /* cache registers 65 to 80, they are write-only! */ u8 cache[16]; - struct i2c_client i2c; + struct i2c_client *i2c; struct aoa_codec codec; u32 initialised:1, spdif_locked:1, @@ -72,7 +72,7 @@ static int onyx_read_register(struct onyx *onyx, u8 reg, u8 *value) *value = onyx->cache[reg-FIRSTREGISTER]; return 0; } - v = i2c_smbus_read_byte_data(&onyx->i2c, reg); + v = i2c_smbus_read_byte_data(onyx->i2c, reg); if (v < 0) return -1; *value = (u8)v; @@ -84,7 +84,7 @@ static int onyx_write_register(struct onyx *onyx, u8 reg, u8 value) { int result; - result = i2c_smbus_write_byte_data(&onyx->i2c, reg, value); + result = i2c_smbus_write_byte_data(onyx->i2c, reg, value); if (!result) onyx->cache[reg-FIRSTREGISTER] = value; return result; @@ -996,12 +996,45 @@ static void onyx_exit_codec(struct aoa_codec *codec) onyx->codec.soundbus_dev->detach_codec(onyx->codec.soundbus_dev, onyx); } -static struct i2c_driver onyx_driver; - static int onyx_create(struct i2c_adapter *adapter, struct device_node *node, int addr) { + struct i2c_board_info info; + struct i2c_client *client; + + memset(&info, 0, sizeof(struct i2c_board_info)); + strlcpy(info.type, "aoa_codec_onyx", I2C_NAME_SIZE); + info.addr = addr; + info.platform_data = node; + client = i2c_new_device(adapter, &info); + if (!client) + return -ENODEV; + + /* + * We know the driver is already loaded, so the device should be + * already bound. If not it means binding failed, which suggests + * the device doesn't really exist and should be deleted. + * Ideally this would be replaced by better checks _before_ + * instantiating the device. + */ + if (!client->driver) { + i2c_unregister_device(client); + return -ENODEV; + } + + /* + * Let i2c-core delete that device on driver removal. + * This is safe because i2c-core holds the core_lock mutex for us. + */ + list_add_tail(&client->detected, &client->driver->clients); + return 0; +} + +static int onyx_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device_node *node = client->dev.platform_data; struct onyx *onyx; u8 dummy; @@ -1011,20 +1044,12 @@ static int onyx_create(struct i2c_adapter *adapter, return -ENOMEM; mutex_init(&onyx->mutex); - onyx->i2c.driver = &onyx_driver; - onyx->i2c.adapter = adapter; - onyx->i2c.addr = addr & 0x7f; - strlcpy(onyx->i2c.name, "onyx audio codec", I2C_NAME_SIZE); - - if (i2c_attach_client(&onyx->i2c)) { - printk(KERN_ERR PFX "failed to attach to i2c\n"); - goto fail; - } + onyx->i2c = client; + i2c_set_clientdata(client, onyx); /* we try to read from register ONYX_REG_CONTROL * to check if the codec is present */ if (onyx_read_register(onyx, ONYX_REG_CONTROL, &dummy) != 0) { - i2c_detach_client(&onyx->i2c); printk(KERN_ERR PFX "failed to read control register\n"); goto fail; } @@ -1036,14 +1061,14 @@ static int onyx_create(struct i2c_adapter *adapter, onyx->codec.node = of_node_get(node); if (aoa_codec_register(&onyx->codec)) { - i2c_detach_client(&onyx->i2c); goto fail; } printk(KERN_DEBUG PFX "created and attached onyx instance\n"); return 0; fail: + i2c_set_clientdata(client, NULL); kfree(onyx); - return -EINVAL; + return -ENODEV; } static int onyx_i2c_attach(struct i2c_adapter *adapter) @@ -1080,28 +1105,33 @@ static int onyx_i2c_attach(struct i2c_adapter *adapter) return onyx_create(adapter, NULL, 0x47); } -static int onyx_i2c_detach(struct i2c_client *client) +static int onyx_i2c_remove(struct i2c_client *client) { - struct onyx *onyx = container_of(client, struct onyx, i2c); - int err; + struct onyx *onyx = i2c_get_clientdata(client); - if ((err = i2c_detach_client(client))) - return err; aoa_codec_unregister(&onyx->codec); of_node_put(onyx->codec.node); if (onyx->codec_info) kfree(onyx->codec_info); + i2c_set_clientdata(client, onyx); kfree(onyx); return 0; } +static const struct i2c_device_id onyx_i2c_id[] = { + { "aoa_codec_onyx", 0 }, + { } +}; + static struct i2c_driver onyx_driver = { .driver = { .name = "aoa_codec_onyx", .owner = THIS_MODULE, }, .attach_adapter = onyx_i2c_attach, - .detach_client = onyx_i2c_detach, + .probe = onyx_i2c_probe, + .remove = onyx_i2c_remove, + .id_table = onyx_i2c_id, }; static int __init onyx_init(void) diff --git a/sound/aoa/codecs/tas.c b/sound/aoa/codecs/tas.c index 008e0f85097..f0ebc971c68 100644 --- a/sound/aoa/codecs/tas.c +++ b/sound/aoa/codecs/tas.c @@ -82,7 +82,7 @@ MODULE_DESCRIPTION("tas codec driver for snd-aoa"); struct tas { struct aoa_codec codec; - struct i2c_client i2c; + struct i2c_client *i2c; u32 mute_l:1, mute_r:1 , controls_created:1 , drc_enabled:1, @@ -108,9 +108,9 @@ static struct tas *codec_to_tas(struct aoa_codec *codec) static inline int tas_write_reg(struct tas *tas, u8 reg, u8 len, u8 *data) { if (len == 1) - return i2c_smbus_write_byte_data(&tas->i2c, reg, *data); + return i2c_smbus_write_byte_data(tas->i2c, reg, *data); else - return i2c_smbus_write_i2c_block_data(&tas->i2c, reg, len, data); + return i2c_smbus_write_i2c_block_data(tas->i2c, reg, len, data); } static void tas3004_set_drc(struct tas *tas) @@ -882,12 +882,34 @@ static void tas_exit_codec(struct aoa_codec *codec) } -static struct i2c_driver tas_driver; - static int tas_create(struct i2c_adapter *adapter, struct device_node *node, int addr) { + struct i2c_board_info info; + struct i2c_client *client; + + memset(&info, 0, sizeof(struct i2c_board_info)); + strlcpy(info.type, "aoa_codec_tas", I2C_NAME_SIZE); + info.addr = addr; + info.platform_data = node; + + client = i2c_new_device(adapter, &info); + if (!client) + return -ENODEV; + + /* + * Let i2c-core delete that device on driver removal. + * This is safe because i2c-core holds the core_lock mutex for us. + */ + list_add_tail(&client->detected, &client->driver->clients); + return 0; +} + +static int tas_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device_node *node = client->dev.platform_data; struct tas *tas; tas = kzalloc(sizeof(struct tas), GFP_KERNEL); @@ -896,17 +918,11 @@ static int tas_create(struct i2c_adapter *adapter, return -ENOMEM; mutex_init(&tas->mtx); - tas->i2c.driver = &tas_driver; - tas->i2c.adapter = adapter; - tas->i2c.addr = addr; + tas->i2c = client; + i2c_set_clientdata(client, tas); + /* seems that half is a saner default */ tas->drc_range = TAS3004_DRC_MAX / 2; - strlcpy(tas->i2c.name, "tas audio codec", I2C_NAME_SIZE); - - if (i2c_attach_client(&tas->i2c)) { - printk(KERN_ERR PFX "failed to attach to i2c\n"); - goto fail; - } strlcpy(tas->codec.name, "tas", MAX_CODEC_NAME_LEN); tas->codec.owner = THIS_MODULE; @@ -915,14 +931,12 @@ static int tas_create(struct i2c_adapter *adapter, tas->codec.node = of_node_get(node); if (aoa_codec_register(&tas->codec)) { - goto detach; + goto fail; } printk(KERN_DEBUG "snd-aoa-codec-tas: tas found, addr 0x%02x on %s\n", - addr, node->full_name); + (unsigned int)client->addr, node->full_name); return 0; - detach: - i2c_detach_client(&tas->i2c); fail: mutex_destroy(&tas->mtx); kfree(tas); @@ -970,14 +984,11 @@ static int tas_i2c_attach(struct i2c_adapter *adapter) return -ENODEV; } -static int tas_i2c_detach(struct i2c_client *client) +static int tas_i2c_remove(struct i2c_client *client) { - struct tas *tas = container_of(client, struct tas, i2c); - int err; + struct tas *tas = i2c_get_clientdata(client); u8 tmp = TAS_ACR_ANALOG_PDOWN; - if ((err = i2c_detach_client(client))) - return err; aoa_codec_unregister(&tas->codec); of_node_put(tas->codec.node); @@ -989,13 +1000,20 @@ static int tas_i2c_detach(struct i2c_client *client) return 0; } +static const struct i2c_device_id tas_i2c_id[] = { + { "aoa_codec_tas", 0 }, + { } +}; + static struct i2c_driver tas_driver = { .driver = { .name = "aoa_codec_tas", .owner = THIS_MODULE, }, .attach_adapter = tas_i2c_attach, - .detach_client = tas_i2c_detach, + .probe = tas_i2c_probe, + .remove = tas_i2c_remove, + .id_table = tas_i2c_id, }; static int __init tas_init(void) -- cgit v1.2.3 From 5de4155bb3760fc13a172c5cef2368ce218ebe1c Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Mon, 20 Apr 2009 22:56:59 +0200 Subject: ALSA: keywest: Convert to new-style i2c driver The legacy i2c binding model is going away soon, so convert the ppc keywest sound driver to the new model or it will break. Signed-off-by: Jean Delvare Cc: Benjamin Herrenschmidt Signed-off-by: Takashi Iwai --- sound/ppc/keywest.c | 82 ++++++++++++++++++++++++++--------------------------- 1 file changed, 41 insertions(+), 41 deletions(-) diff --git a/sound/ppc/keywest.c b/sound/ppc/keywest.c index 6ff99ed7751..a5afb2682e7 100644 --- a/sound/ppc/keywest.c +++ b/sound/ppc/keywest.c @@ -33,26 +33,25 @@ static struct pmac_keywest *keywest_ctx; -static int keywest_attach_adapter(struct i2c_adapter *adapter); -static int keywest_detach_client(struct i2c_client *client); - -struct i2c_driver keywest_driver = { - .driver = { - .name = "PMac Keywest Audio", - }, - .attach_adapter = &keywest_attach_adapter, - .detach_client = &keywest_detach_client, -}; - - #ifndef i2c_device_name #define i2c_device_name(x) ((x)->name) #endif +static int keywest_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + i2c_set_clientdata(client, keywest_ctx); + return 0; +} + +/* + * This is kind of a hack, best would be to turn powermac to fixed i2c + * bus numbers and declare the sound device as part of platform + * initialization + */ static int keywest_attach_adapter(struct i2c_adapter *adapter) { - int err; - struct i2c_client *new_client; + struct i2c_board_info info; if (! keywest_ctx) return -EINVAL; @@ -60,46 +59,47 @@ static int keywest_attach_adapter(struct i2c_adapter *adapter) if (strncmp(i2c_device_name(adapter), "mac-io", 6)) return 0; /* ignored */ - new_client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); - if (! new_client) - return -ENOMEM; - - new_client->addr = keywest_ctx->addr; - i2c_set_clientdata(new_client, keywest_ctx); - new_client->adapter = adapter; - new_client->driver = &keywest_driver; - new_client->flags = 0; - - strcpy(i2c_device_name(new_client), keywest_ctx->name); - keywest_ctx->client = new_client; + memset(&info, 0, sizeof(struct i2c_board_info)); + strlcpy(info.type, "keywest", I2C_NAME_SIZE); + info.addr = keywest_ctx->addr; + keywest_ctx->client = i2c_new_device(adapter, &info); - /* Tell the i2c layer a new client has arrived */ - if (i2c_attach_client(new_client)) { - snd_printk(KERN_ERR "tumbler: cannot attach i2c client\n"); - err = -ENODEV; - goto __err; - } - + /* + * Let i2c-core delete that device on driver removal. + * This is safe because i2c-core holds the core_lock mutex for us. + */ + list_add_tail(&keywest_ctx->client->detected, + &keywest_ctx->client->driver->clients); return 0; - - __err: - kfree(new_client); - keywest_ctx->client = NULL; - return err; } -static int keywest_detach_client(struct i2c_client *client) +static int keywest_remove(struct i2c_client *client) { + i2c_set_clientdata(client, NULL); if (! keywest_ctx) return 0; if (client == keywest_ctx->client) keywest_ctx->client = NULL; - i2c_detach_client(client); - kfree(client); return 0; } + +static const struct i2c_device_id keywest_i2c_id[] = { + { "keywest", 0 }, + { } +}; + +struct i2c_driver keywest_driver = { + .driver = { + .name = "PMac Keywest Audio", + }, + .attach_adapter = keywest_attach_adapter, + .probe = keywest_probe, + .remove = keywest_remove, + .id_table = keywest_i2c_id, +}; + /* exported */ void snd_pmac_keywest_cleanup(struct pmac_keywest *i2c) { -- cgit v1.2.3 From bb023080fe72f1f80648e9b60771d9a94ce75aca Mon Sep 17 00:00:00 2001 From: Kailang Yang Date: Tue, 21 Apr 2009 07:35:25 +0200 Subject: ALSA: hda - Fix alc662_init_verbs Don't unmute unneeded amps for input mixers of ALC662 & co. It caused possible recording noises. Signed-off-by: Kailang Yang Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 7 ------- 1 file changed, 7 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 6ed787eedd0..78bea2c6ab6 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -15641,14 +15641,7 @@ static struct hda_verb alc662_init_verbs[] = { /* Mixer elements: 0x18, 19, 1a, 1b, 1c, 1d, 14, 15, 16, 17, 0b */ /* Input mixer */ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, - {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, - {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)}, - {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)}, - {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, - {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, - {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)}, - {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)}, /* always trun on EAPD */ {0x14, AC_VERB_SET_EAPD_BTLENABLE, 2}, -- cgit v1.2.3 From 622e84cdff719b9dcd3f495ddb0afb54995799cc Mon Sep 17 00:00:00 2001 From: Kailang Yang Date: Tue, 21 Apr 2009 07:39:04 +0200 Subject: ALSA: hda - Add quirks for Realtek codecs - Support ASUS F81Se F5Q P80 U20A U80 U50 UX50 for ALC269 - Support ASUS F70SL UX20 X58LE F50Z N80Vc N81Te N505Tp Vx3V N5051A for ALC663 - Support DELL ZM1 for ALC272 Signed-off-by: Kailang Yang Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 98 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 98 insertions(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 78bea2c6ab6..c9300a3427e 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -188,6 +188,8 @@ enum { ALC663_ASUS_MODE4, ALC663_ASUS_MODE5, ALC663_ASUS_MODE6, + ALC272_DELL, + ALC272_DELL_ZM1, ALC662_AUTO, ALC662_MODEL_LAST, }; @@ -12976,10 +12978,17 @@ static struct snd_pci_quirk alc269_cfg_tbl[] = { SND_PCI_QUIRK(0x17aa, 0x3bf8, "Quanta FL1", ALC269_QUANTA_FL1), SND_PCI_QUIRK(0x1043, 0x8330, "ASUS Eeepc P703 P900A", ALC269_ASUS_EEEPC_P703), + SND_PCI_QUIRK(0x1043, 0x1883, "ASUS F81Se", ALC269_ASUS_EEEPC_P703), + SND_PCI_QUIRK(0x1043, 0x16a3, "ASUS F5Q", ALC269_ASUS_EEEPC_P703), + SND_PCI_QUIRK(0x1043, 0x1723, "ASUS P80", ALC269_ASUS_EEEPC_P703), + SND_PCI_QUIRK(0x1043, 0x1773, "ASUS U20A", ALC269_ASUS_EEEPC_P703), + SND_PCI_QUIRK(0x1043, 0x1743, "ASUS U80", ALC269_ASUS_EEEPC_P703), + SND_PCI_QUIRK(0x1043, 0x1653, "ASUS U50", ALC269_ASUS_EEEPC_P703), SND_PCI_QUIRK(0x1043, 0x831a, "ASUS Eeepc P901", ALC269_ASUS_EEEPC_P901), SND_PCI_QUIRK(0x1043, 0x834a, "ASUS Eeepc S101", ALC269_ASUS_EEEPC_P901), + SND_PCI_QUIRK(0x1043, 0x16e3, "ASUS UX50", ALC269_ASUS_EEEPC_P901), SND_PCI_QUIRK(0x1734, 0x115d, "FSC Amilo", ALC269_FUJITSU), SND_PCI_QUIRK(0x10cf, 0x1475, "Lifebook ICH9M-based", ALC269_LIFEBOOK), {} @@ -15210,12 +15219,23 @@ static hda_nid_t alc662_dac_nids[4] = { 0x02, 0x03, 0x04 }; +static hda_nid_t alc272_dac_nids[2] = { + 0x02, 0x03 +}; + static hda_nid_t alc662_adc_nids[1] = { /* ADC1-2 */ 0x09, }; +static hda_nid_t alc272_adc_nids[1] = { + /* ADC1-2 */ + 0x08, +}; + static hda_nid_t alc662_capsrc_nids[1] = { 0x22 }; +static hda_nid_t alc272_capsrc_nids[1] = { 0x23 }; + /* input MUX */ /* FIXME: should be a matrix-type input source selection */ @@ -15836,12 +15856,48 @@ static struct hda_verb alc662_ecs_init_verbs[] = { {} }; +static struct hda_verb alc272_dell_zm1_init_verbs[] = { + {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, + {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, + {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, + {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, + {0x21, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, + {0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + {0x21, AC_VERB_SET_CONNECT_SEL, 0x01}, /* Headphone */ + {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(9)}, + {0x18, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_MIC_EVENT}, + {0x21, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_HP_EVENT}, + {} +}; + +static struct hda_verb alc272_dell_init_verbs[] = { + {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, + {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, + {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, + {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN}, + {0x21, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, + {0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + {0x21, AC_VERB_SET_CONNECT_SEL, 0x01}, /* Headphone */ + {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(9)}, + {0x18, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_MIC_EVENT}, + {0x21, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_HP_EVENT}, + {} +}; + static struct snd_kcontrol_new alc662_auto_capture_mixer[] = { HDA_CODEC_VOLUME("Capture Volume", 0x09, 0x0, HDA_INPUT), HDA_CODEC_MUTE("Capture Switch", 0x09, 0x0, HDA_INPUT), { } /* end */ }; +static struct snd_kcontrol_new alc272_auto_capture_mixer[] = { + HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT), + HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT), + { } /* end */ +}; + static void alc662_lenovo_101e_ispeaker_automute(struct hda_codec *codec) { unsigned int present; @@ -16353,6 +16409,8 @@ static const char *alc662_models[ALC662_MODEL_LAST] = { static struct snd_pci_quirk alc662_cfg_tbl[] = { SND_PCI_QUIRK(0x1019, 0x9087, "ECS", ALC662_ECS), + SND_PCI_QUIRK(0x1028, 0x02d6, "DELL", ALC272_DELL), + SND_PCI_QUIRK(0x1028, 0x02f4, "DELL ZM1", ALC272_DELL_ZM1), SND_PCI_QUIRK(0x1043, 0x1000, "ASUS N50Vm", ALC663_ASUS_MODE1), SND_PCI_QUIRK(0x1043, 0x1092, "ASUS NB", ALC663_ASUS_MODE3), SND_PCI_QUIRK(0x1043, 0x11c3, "ASUS M70V", ALC663_ASUS_MODE3), @@ -16365,26 +16423,36 @@ static struct snd_pci_quirk alc662_cfg_tbl[] = { SND_PCI_QUIRK(0x1043, 0x1763, "ASUS NB", ALC663_ASUS_MODE6), SND_PCI_QUIRK(0x1043, 0x1765, "ASUS NB", ALC663_ASUS_MODE6), SND_PCI_QUIRK(0x1043, 0x1783, "ASUS NB", ALC662_ASUS_MODE2), + SND_PCI_QUIRK(0x1043, 0x17b3, "ASUS F70SL", ALC663_ASUS_MODE3), + SND_PCI_QUIRK(0x1043, 0x17c3, "ASUS UX20", ALC663_ASUS_M51VA), + SND_PCI_QUIRK(0x1043, 0x17f3, "ASUS X58LE", ALC662_ASUS_MODE2), SND_PCI_QUIRK(0x1043, 0x1813, "ASUS NB", ALC662_ASUS_MODE2), SND_PCI_QUIRK(0x1043, 0x1823, "ASUS NB", ALC663_ASUS_MODE5), SND_PCI_QUIRK(0x1043, 0x1833, "ASUS NB", ALC663_ASUS_MODE6), SND_PCI_QUIRK(0x1043, 0x1843, "ASUS NB", ALC662_ASUS_MODE2), + SND_PCI_QUIRK(0x1043, 0x1853, "ASUS F50Z", ALC663_ASUS_MODE1), SND_PCI_QUIRK(0x1043, 0x1864, "ASUS NB", ALC662_ASUS_MODE2), SND_PCI_QUIRK(0x1043, 0x1876, "ASUS NB", ALC662_ASUS_MODE2), SND_PCI_QUIRK(0x1043, 0x1878, "ASUS M51VA", ALC663_ASUS_M51VA), /*SND_PCI_QUIRK(0x1043, 0x1878, "ASUS M50Vr", ALC663_ASUS_MODE1),*/ SND_PCI_QUIRK(0x1043, 0x1893, "ASUS M50Vm", ALC663_ASUS_MODE3), SND_PCI_QUIRK(0x1043, 0x1894, "ASUS X55", ALC663_ASUS_MODE3), + SND_PCI_QUIRK(0x1043, 0x18b3, "ASUS N80Vc", ALC663_ASUS_MODE1), + SND_PCI_QUIRK(0x1043, 0x18d3, "ASUS N81Te", ALC663_ASUS_MODE1), + SND_PCI_QUIRK(0x1043, 0x18f3, "ASUS N505Tp", ALC663_ASUS_MODE1), SND_PCI_QUIRK(0x1043, 0x1903, "ASUS F5GL", ALC663_ASUS_MODE1), SND_PCI_QUIRK(0x1043, 0x1913, "ASUS NB", ALC662_ASUS_MODE2), SND_PCI_QUIRK(0x1043, 0x1933, "ASUS F80Q", ALC662_ASUS_MODE2), + SND_PCI_QUIRK(0x1043, 0x1943, "ASUS Vx3V", ALC663_ASUS_MODE1), SND_PCI_QUIRK(0x1043, 0x1953, "ASUS NB", ALC663_ASUS_MODE1), SND_PCI_QUIRK(0x1043, 0x1963, "ASUS X71C", ALC663_ASUS_MODE3), + SND_PCI_QUIRK(0x1043, 0x1983, "ASUS N5051A", ALC663_ASUS_MODE1), SND_PCI_QUIRK(0x1043, 0x1993, "ASUS N20", ALC663_ASUS_MODE1), SND_PCI_QUIRK(0x1043, 0x19a3, "ASUS G50V", ALC663_ASUS_G50V), /*SND_PCI_QUIRK(0x1043, 0x19a3, "ASUS NB", ALC663_ASUS_MODE1),*/ SND_PCI_QUIRK(0x1043, 0x19b3, "ASUS F7Z", ALC663_ASUS_MODE1), SND_PCI_QUIRK(0x1043, 0x19c3, "ASUS F5Z/F6x", ALC662_ASUS_MODE2), + SND_PCI_QUIRK(0x1043, 0x19d3, "ASUS NB", ALC663_ASUS_M51VA), SND_PCI_QUIRK(0x1043, 0x19e3, "ASUS NB", ALC663_ASUS_MODE1), SND_PCI_QUIRK(0x1043, 0x19f3, "ASUS NB", ALC663_ASUS_MODE4), SND_PCI_QUIRK(0x1043, 0x8290, "ASUS P5GC-MX", ALC662_3ST_6ch_DIG), @@ -16633,6 +16701,36 @@ static struct alc_config_preset alc662_presets[] = { .unsol_event = alc663_mode6_unsol_event, .init_hook = alc663_mode6_inithook, }, + [ALC272_DELL] = { + .mixers = { alc663_m51va_mixer }, + .cap_mixer = alc272_auto_capture_mixer, + .init_verbs = { alc662_init_verbs, alc272_dell_init_verbs }, + .num_dacs = ARRAY_SIZE(alc272_dac_nids), + .dac_nids = alc662_dac_nids, + .num_channel_mode = ARRAY_SIZE(alc662_3ST_2ch_modes), + .adc_nids = alc272_adc_nids, + .num_adc_nids = ARRAY_SIZE(alc272_adc_nids), + .capsrc_nids = alc272_capsrc_nids, + .channel_mode = alc662_3ST_2ch_modes, + .input_mux = &alc663_m51va_capture_source, + .unsol_event = alc663_m51va_unsol_event, + .init_hook = alc663_m51va_inithook, + }, + [ALC272_DELL_ZM1] = { + .mixers = { alc663_m51va_mixer }, + .cap_mixer = alc662_auto_capture_mixer, + .init_verbs = { alc662_init_verbs, alc272_dell_zm1_init_verbs }, + .num_dacs = ARRAY_SIZE(alc272_dac_nids), + .dac_nids = alc662_dac_nids, + .num_channel_mode = ARRAY_SIZE(alc662_3ST_2ch_modes), + .adc_nids = alc662_adc_nids, + .num_adc_nids = ARRAY_SIZE(alc662_adc_nids), + .capsrc_nids = alc662_capsrc_nids, + .channel_mode = alc662_3ST_2ch_modes, + .input_mux = &alc663_m51va_capture_source, + .unsol_event = alc663_m51va_unsol_event, + .init_hook = alc663_m51va_inithook, + }, }; -- cgit v1.2.3 From 9a4f92a603cd72ee534cead20cbc627b34cfc884 Mon Sep 17 00:00:00 2001 From: Yevgeny Petrilin Date: Mon, 20 Apr 2009 04:24:28 +0000 Subject: mlx4_en: Fix error handling while activating RX rings In case of failure of either srq creation or page allocation, the cleanup code handled the failed ring as well, and tried to destroy resources that where not allocated. Signed-off-by: Yevgeny Petrilin Signed-off-by: David S. Miller --- drivers/net/mlx4/en_rx.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/mlx4/en_rx.c b/drivers/net/mlx4/en_rx.c index 7e40741fb7d..8673008f72d 100644 --- a/drivers/net/mlx4/en_rx.c +++ b/drivers/net/mlx4/en_rx.c @@ -436,8 +436,9 @@ int mlx4_en_activate_rx_rings(struct mlx4_en_priv *priv) /* Initialize page allocators */ err = mlx4_en_init_allocator(priv, ring); if (err) { - mlx4_err(mdev, "Failed initializing ring allocator\n"); - goto err_allocator; + mlx4_err(mdev, "Failed initializing ring allocator\n"); + ring_ind--; + goto err_allocator; } /* Fill Rx buffers */ @@ -467,6 +468,7 @@ int mlx4_en_activate_rx_rings(struct mlx4_en_priv *priv) ring->wqres.db.dma, &ring->srq); if (err){ mlx4_err(mdev, "Failed to allocate srq\n"); + ring_ind--; goto err_srq; } ring->srq.event = mlx4_en_srq_event; -- cgit v1.2.3 From 1e338db56e5a6a5bb93884c1fb3b0b9f01958f93 Mon Sep 17 00:00:00 2001 From: Yevgeny Petrilin Date: Mon, 20 Apr 2009 04:26:05 +0000 Subject: mlx4_en: Fix a race at restart task The query whether the port is up or not should be done at the execution of the restart task and not when it is queued. Signed-off-by: Yevgeny Petrilin Signed-off-by: David S. Miller --- drivers/net/mlx4/en_netdev.c | 19 +++++++++++-------- 1 file changed, 11 insertions(+), 8 deletions(-) diff --git a/drivers/net/mlx4/en_netdev.c b/drivers/net/mlx4/en_netdev.c index 303c23de6ca..09fb7cf9f48 100644 --- a/drivers/net/mlx4/en_netdev.c +++ b/drivers/net/mlx4/en_netdev.c @@ -348,11 +348,9 @@ static void mlx4_en_tx_timeout(struct net_device *dev) if (netif_msg_timer(priv)) mlx4_warn(mdev, "Tx timeout called on port:%d\n", priv->port); - if (netif_carrier_ok(dev)) { - priv->port_stats.tx_timeout++; - mlx4_dbg(DRV, priv, "Scheduling watchdog\n"); - queue_work(mdev->workqueue, &priv->watchdog_task); - } + priv->port_stats.tx_timeout++; + mlx4_dbg(DRV, priv, "Scheduling watchdog\n"); + queue_work(mdev->workqueue, &priv->watchdog_task); } @@ -761,9 +759,14 @@ static void mlx4_en_restart(struct work_struct *work) struct net_device *dev = priv->dev; mlx4_dbg(DRV, priv, "Watchdog task called for port %d\n", priv->port); - mlx4_en_stop_port(dev); - if (mlx4_en_start_port(dev)) - mlx4_err(mdev, "Failed restarting port %d\n", priv->port); + + mutex_lock(&mdev->state_lock); + if (priv->port_up) { + mlx4_en_stop_port(dev); + if (mlx4_en_start_port(dev)) + mlx4_err(mdev, "Failed restarting port %d\n", priv->port); + } + mutex_unlock(&mdev->state_lock); } -- cgit v1.2.3 From 966508f7a591399a0b0dcfc0336e88480e5ed520 Mon Sep 17 00:00:00 2001 From: Yevgeny Petrilin Date: Mon, 20 Apr 2009 04:30:03 +0000 Subject: mlx4_en: Assign dummy event handler for TX queue The low level driver always assumes this handler exists. The lack of it could cause kernel panic Signed-off-by: Yevgeny Petrilin Signed-off-by: David S. Miller --- drivers/net/mlx4/en_resources.c | 6 ++++++ drivers/net/mlx4/en_rx.c | 6 ------ drivers/net/mlx4/en_tx.c | 1 + drivers/net/mlx4/mlx4_en.h | 1 + 4 files changed, 8 insertions(+), 6 deletions(-) diff --git a/drivers/net/mlx4/en_resources.c b/drivers/net/mlx4/en_resources.c index a0545209e50..65ca706c04b 100644 --- a/drivers/net/mlx4/en_resources.c +++ b/drivers/net/mlx4/en_resources.c @@ -94,3 +94,9 @@ void mlx4_en_unmap_buffer(struct mlx4_buf *buf) vunmap(buf->direct.buf); } + +void mlx4_en_sqp_event(struct mlx4_qp *qp, enum mlx4_event event) +{ + return; +} + diff --git a/drivers/net/mlx4/en_rx.c b/drivers/net/mlx4/en_rx.c index 8673008f72d..0cbb78ca7b2 100644 --- a/drivers/net/mlx4/en_rx.c +++ b/drivers/net/mlx4/en_rx.c @@ -928,12 +928,6 @@ void mlx4_en_set_default_rss_map(struct mlx4_en_priv *priv, } } -static void mlx4_en_sqp_event(struct mlx4_qp *qp, enum mlx4_event event) -{ - return; -} - - static int mlx4_en_config_rss_qp(struct mlx4_en_priv *priv, int qpn, int srqn, int cqn, enum mlx4_qp_state *state, diff --git a/drivers/net/mlx4/en_tx.c b/drivers/net/mlx4/en_tx.c index 4afd5993e31..ac6fc499b28 100644 --- a/drivers/net/mlx4/en_tx.c +++ b/drivers/net/mlx4/en_tx.c @@ -112,6 +112,7 @@ int mlx4_en_create_tx_ring(struct mlx4_en_priv *priv, mlx4_err(mdev, "Failed allocating qp %d\n", ring->qpn); goto err_reserve; } + ring->qp.event = mlx4_en_sqp_event; return 0; diff --git a/drivers/net/mlx4/mlx4_en.h b/drivers/net/mlx4/mlx4_en.h index e9af32d41ca..ef840abbcd3 100644 --- a/drivers/net/mlx4/mlx4_en.h +++ b/drivers/net/mlx4/mlx4_en.h @@ -538,6 +538,7 @@ int mlx4_en_poll_rx_cq(struct napi_struct *napi, int budget); void mlx4_en_fill_qp_context(struct mlx4_en_priv *priv, int size, int stride, int is_tx, int rss, int qpn, int cqn, int srqn, struct mlx4_qp_context *context); +void mlx4_en_sqp_event(struct mlx4_qp *qp, enum mlx4_event event); int mlx4_en_map_buffer(struct mlx4_buf *buf); void mlx4_en_unmap_buffer(struct mlx4_buf *buf); -- cgit v1.2.3 From 45b4d66d690600dac1aa805b75763331483acf22 Mon Sep 17 00:00:00 2001 From: Yevgeny Petrilin Date: Mon, 20 Apr 2009 04:33:15 +0000 Subject: mlx4_en: use NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM for tx csum at initialization The former usage was to set the NETIF_F_HW_CSUM flag which is not used in get_tx_csum. It caused Ethtool to show tx checksum as "on" even though it was turned off in previous operation. Signed-off-by: Yevgeny Petrilin Signed-off-by: David S. Miller --- drivers/net/mlx4/en_netdev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/mlx4/en_netdev.c b/drivers/net/mlx4/en_netdev.c index 09fb7cf9f48..438678ab2a1 100644 --- a/drivers/net/mlx4/en_netdev.c +++ b/drivers/net/mlx4/en_netdev.c @@ -1057,7 +1057,7 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port, * Set driver features */ dev->features |= NETIF_F_SG; - dev->features |= NETIF_F_HW_CSUM; + dev->features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM; dev->features |= NETIF_F_HIGHDMA; dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX | -- cgit v1.2.3 From b1b243afac302d181d19c8024c355d9677beab49 Mon Sep 17 00:00:00 2001 From: Yevgeny Petrilin Date: Mon, 20 Apr 2009 04:34:38 +0000 Subject: mlx4_en: Move to SW counters for total bytes and packets The per ring counters are implemented in SW. Now moving to have the total counters as the sum of all rings. This way the numbers will always be consistent and we no longer depend on HW buffer size limitations for those counters that can be insufficient in some cases. Signed-off-by: Yevgeny Petrilin Signed-off-by: David S. Miller --- drivers/net/mlx4/en_port.c | 45 +++++++++++++-------------------------------- 1 file changed, 13 insertions(+), 32 deletions(-) diff --git a/drivers/net/mlx4/en_port.c b/drivers/net/mlx4/en_port.c index c5a4c038975..a29abe845d2 100644 --- a/drivers/net/mlx4/en_port.c +++ b/drivers/net/mlx4/en_port.c @@ -151,6 +151,7 @@ int mlx4_en_DUMP_ETH_STATS(struct mlx4_en_dev *mdev, u8 port, u8 reset) struct mlx4_cmd_mailbox *mailbox; u64 in_mod = reset << 8 | port; int err; + int i; mailbox = mlx4_alloc_cmd_mailbox(mdev->dev); if (IS_ERR(mailbox)) @@ -165,38 +166,18 @@ int mlx4_en_DUMP_ETH_STATS(struct mlx4_en_dev *mdev, u8 port, u8 reset) spin_lock_bh(&priv->stats_lock); - stats->rx_packets = be32_to_cpu(mlx4_en_stats->RTOTFRMS) - - be32_to_cpu(mlx4_en_stats->RDROP); - stats->tx_packets = be64_to_cpu(mlx4_en_stats->TTOT_prio_0) + - be64_to_cpu(mlx4_en_stats->TTOT_prio_1) + - be64_to_cpu(mlx4_en_stats->TTOT_prio_2) + - be64_to_cpu(mlx4_en_stats->TTOT_prio_3) + - be64_to_cpu(mlx4_en_stats->TTOT_prio_4) + - be64_to_cpu(mlx4_en_stats->TTOT_prio_5) + - be64_to_cpu(mlx4_en_stats->TTOT_prio_6) + - be64_to_cpu(mlx4_en_stats->TTOT_prio_7) + - be64_to_cpu(mlx4_en_stats->TTOT_novlan) + - be64_to_cpu(mlx4_en_stats->TTOT_loopbk); - stats->rx_bytes = be64_to_cpu(mlx4_en_stats->ROCT_prio_0) + - be64_to_cpu(mlx4_en_stats->ROCT_prio_1) + - be64_to_cpu(mlx4_en_stats->ROCT_prio_2) + - be64_to_cpu(mlx4_en_stats->ROCT_prio_3) + - be64_to_cpu(mlx4_en_stats->ROCT_prio_4) + - be64_to_cpu(mlx4_en_stats->ROCT_prio_5) + - be64_to_cpu(mlx4_en_stats->ROCT_prio_6) + - be64_to_cpu(mlx4_en_stats->ROCT_prio_7) + - be64_to_cpu(mlx4_en_stats->ROCT_novlan); - - stats->tx_bytes = be64_to_cpu(mlx4_en_stats->TTTLOCT_prio_0) + - be64_to_cpu(mlx4_en_stats->TTTLOCT_prio_1) + - be64_to_cpu(mlx4_en_stats->TTTLOCT_prio_2) + - be64_to_cpu(mlx4_en_stats->TTTLOCT_prio_3) + - be64_to_cpu(mlx4_en_stats->TTTLOCT_prio_4) + - be64_to_cpu(mlx4_en_stats->TTTLOCT_prio_5) + - be64_to_cpu(mlx4_en_stats->TTTLOCT_prio_6) + - be64_to_cpu(mlx4_en_stats->TTTLOCT_prio_7) + - be64_to_cpu(mlx4_en_stats->TTTLOCT_novlan) + - be64_to_cpu(mlx4_en_stats->TTTLOCT_loopbk); + stats->rx_packets = 0; + stats->rx_bytes = 0; + for (i = 0; i < priv->rx_ring_num; i++) { + stats->rx_packets += priv->rx_ring[i].packets; + stats->rx_bytes += priv->rx_ring[i].bytes; + } + stats->tx_packets = 0; + stats->tx_bytes = 0; + for (i = 0; i <= priv->tx_ring_num; i++) { + stats->tx_packets += priv->tx_ring[i].packets; + stats->tx_bytes += priv->tx_ring[i].bytes; + } stats->rx_errors = be64_to_cpu(mlx4_en_stats->PCS) + be32_to_cpu(mlx4_en_stats->RdropLength) + -- cgit v1.2.3 From 1a44cc3778f63dca5795708da2a2a7696da7fd61 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Mon, 20 Apr 2009 18:32:08 +0000 Subject: mlx4_en: Fix cleanup if workqueue create in mlx4_en_add() fails If creating a workqueue fails, don't jump to the error path where that same workqueue is destroyed, since destroy_workqueue() can't handle a NULL pointer. This was spotted by the Coverity checker (CID 2617). Signed-off-by: Roland Dreier Signed-off-by: David S. Miller --- drivers/net/mlx4/en_main.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/net/mlx4/en_main.c b/drivers/net/mlx4/en_main.c index eda72dd2120..510633fd57f 100644 --- a/drivers/net/mlx4/en_main.c +++ b/drivers/net/mlx4/en_main.c @@ -181,7 +181,7 @@ static void *mlx4_en_add(struct mlx4_dev *dev) mdev->workqueue = create_singlethread_workqueue("mlx4_en"); if (!mdev->workqueue) { err = -ENOMEM; - goto err_close_nic; + goto err_mr; } /* At this stage all non-port specific tasks are complete: @@ -214,9 +214,8 @@ err_free_netdev: flush_workqueue(mdev->workqueue); /* Stop event queue before we drop down to release shared SW state */ - -err_close_nic: destroy_workqueue(mdev->workqueue); + err_mr: mlx4_mr_free(dev, &mdev->mr); err_uar: -- cgit v1.2.3 From 99b28c47091db2bb7f594a5088831d341a800a33 Mon Sep 17 00:00:00 2001 From: Ken Kawasaki Date: Sat, 18 Apr 2009 13:44:44 +0000 Subject: pcnet_cs: add cis(firmware) of the Allied Telesis LA-PCM pcnet_cs: add cis(firmware) of the Allied Telesis LA-PCM Signed-off-by: Ken Kawasaki Signed-off-by: David S. Miller --- drivers/net/pcmcia/pcnet_cs.c | 2 +- firmware/Makefile | 1 + firmware/WHENCE | 10 ++++++++++ firmware/cis/LA-PCM.cis.ihex | 20 ++++++++++++++++++++ 4 files changed, 32 insertions(+), 1 deletion(-) create mode 100644 firmware/cis/LA-PCM.cis.ihex diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c index 2fbf9f9ddd3..652a3688836 100644 --- a/drivers/net/pcmcia/pcnet_cs.c +++ b/drivers/net/pcmcia/pcnet_cs.c @@ -1758,7 +1758,7 @@ static struct pcmcia_device_id pcnet_ids[] = { PCMCIA_MFC_DEVICE_CIS_PROD_ID12(0, "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION", 0x8fdf8f89, 0xdd5ed9e8, "DP83903.cis"), PCMCIA_MFC_DEVICE_CIS_PROD_ID4(0, "NSC MF LAN/Modem", 0x58fc6056, "DP83903.cis"), PCMCIA_MFC_DEVICE_CIS_MANF_CARD(0, 0x0175, 0x0000, "DP83903.cis"), - PCMCIA_DEVICE_CIS_MANF_CARD(0xc00f, 0x0002, "LA-PCM.cis"), + PCMCIA_DEVICE_CIS_MANF_CARD(0xc00f, 0x0002, "cis/LA-PCM.cis"), PCMCIA_DEVICE_CIS_PROD_ID12("KTI", "PE520 PLUS", 0xad180345, 0x9d58d392, "PE520.cis"), PCMCIA_DEVICE_CIS_PROD_ID12("NDC", "Ethernet", 0x01c43ae1, 0x00b2e941, "NE2K.cis"), PCMCIA_DEVICE_CIS_PROD_ID12("PMX ", "PE-200", 0x34f3f1c8, 0x10b59f8c, "PE-200.cis"), diff --git a/firmware/Makefile b/firmware/Makefile index 142c17ab9e5..25200d106ee 100644 --- a/firmware/Makefile +++ b/firmware/Makefile @@ -46,6 +46,7 @@ fw-shipped-$(CONFIG_DVB_TTUSB_BUDGET) += ttusb-budget/dspbootcode.bin fw-shipped-$(CONFIG_E100) += e100/d101m_ucode.bin e100/d101s_ucode.bin \ e100/d102e_ucode.bin fw-shipped-$(CONFIG_MYRI_SBUS) += myricom/lanai.bin +fw-shipped-$(CONFIG_PCMCIA_PCNET) += cis/LA-PCM.cis fw-shipped-$(CONFIG_PCMCIA_SMC91C92) += ositech/Xilinx7OD.bin fw-shipped-$(CONFIG_SCSI_ADVANSYS) += advansys/mcode.bin advansys/38C1600.bin \ advansys/3550.bin advansys/38C0800.bin diff --git a/firmware/WHENCE b/firmware/WHENCE index 10f61c9e5a8..4c52984a831 100644 --- a/firmware/WHENCE +++ b/firmware/WHENCE @@ -576,6 +576,16 @@ Found in hex form in kernel source. -------------------------------------------------------------------------- +Driver: PCMCIA_PCNET - NE2000 compatible PCMCIA adapter + +File: cis/LA-PCM.cis + +Licence: GPL + +Originally developed by the pcmcia-cs project + +-------------------------------------------------------------------------- + Driver: PCMCIA_SMC91C92 - SMC 91Cxx PCMCIA File: ositech/Xilinx7OD.bin diff --git a/firmware/cis/LA-PCM.cis.ihex b/firmware/cis/LA-PCM.cis.ihex new file mode 100644 index 00000000000..a0ff0c7b393 --- /dev/null +++ b/firmware/cis/LA-PCM.cis.ihex @@ -0,0 +1,20 @@ +:100000000105D4F953E9FF17035338FF20040FC04B +:1000100002002102060315390401416C6C69656414 +:100020002054656C657369732C4B2E4B00457468C6 +:1000300065726E6574204C414E20436172640043CA +:10004000656E747265434F4D004C412D50434D0019 +:10005000FF1A0602100000020B1B08810108E06075 +:1000600000021F1B08820108E06020021F1B08839A +:100070000108E06040021F1B08840108E060600284 +:100080001F1B08850108E06080021F1B088601080D +:10009000E060A0021F1B08870108E060C0021F1B70 +:1000A00008880108E060E0021F1B08890108E06081 +:1000B00000031F1B088A0108E06020031F1B088B38 +:1000C0000108E06040031F1B088C0108E06060032A +:1000D0001F1B088D0108E06080031F1B088E0108AC +:1000E000E060A0031F1B088F0108E060C0031F1B16 +:0D00F00008900108E060E0031F1400FF000D +:00000001FF +# +# Replacement CIS for Allied Telesis LA-PCM +# -- cgit v1.2.3 From 1bb593801ee32dd9d983dea3cbedf68f71345f78 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 21 Apr 2009 02:08:51 -0700 Subject: atmel: fix netdev ops conversion sparse says: drivers/net/wireless/atmel.c:1501:3: warning: Initializer entry defined twice drivers/net/wireless/atmel.c:1505:3: also defined here and it's correct; atmel has its own ndo_change_mtu and shouldn't use eth_change_mtu. Signed-off-by: Johannes Berg Signed-off-by: David S. Miller --- drivers/net/wireless/atmel.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/net/wireless/atmel.c b/drivers/net/wireless/atmel.c index 857d84148b1..27eef8fb710 100644 --- a/drivers/net/wireless/atmel.c +++ b/drivers/net/wireless/atmel.c @@ -1502,7 +1502,6 @@ static const struct net_device_ops atmel_netdev_ops = { .ndo_set_mac_address = atmel_set_mac_address, .ndo_start_xmit = start_tx, .ndo_do_ioctl = atmel_ioctl, - .ndo_change_mtu = eth_change_mtu, .ndo_validate_addr = eth_validate_addr, }; -- cgit v1.2.3 From e10f9d87c9ac9fdfadb6305dbbc9052e49a02fdd Mon Sep 17 00:00:00 2001 From: Jaroslav Kysela Date: Tue, 21 Apr 2009 15:17:54 +0200 Subject: [ALSA] ac97_codec: increase timeout for analog subsections On some hardware platforms, the AC97 codec requires more time to wake up. Signed-off-by: Jaroslav Kysela --- sound/pci/ac97/ac97_codec.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/ac97/ac97_codec.c b/sound/pci/ac97/ac97_codec.c index 97ee127ac33..78288dbfc17 100644 --- a/sound/pci/ac97/ac97_codec.c +++ b/sound/pci/ac97/ac97_codec.c @@ -2122,7 +2122,7 @@ int snd_ac97_mixer(struct snd_ac97_bus *bus, struct snd_ac97_template *template, } /* nothing should be in powerdown mode */ snd_ac97_write_cache(ac97, AC97_GENERAL_PURPOSE, 0); - end_time = jiffies + msecs_to_jiffies(100); + end_time = jiffies + msecs_to_jiffies(120); do { if ((snd_ac97_read(ac97, AC97_POWERDOWN) & 0x0f) == 0x0f) goto __ready_ok; -- cgit v1.2.3 From 30fd9940eee910d847f48bd8740b2d0eaa8d2cfc Mon Sep 17 00:00:00 2001 From: Jaroslav Kysela Date: Tue, 21 Apr 2009 15:30:31 +0200 Subject: [ALSA] intel8x0: another attempt to fix ac97_clock measure routine Appearently, a big delay ~300ms is required before hw is settled and ready to transfer samples on some hardware variants. Also, return back "clocking to 48000Hz" message when something fails. Signed-off-by: Jaroslav Kysela --- sound/pci/intel8x0.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/sound/pci/intel8x0.c b/sound/pci/intel8x0.c index 5dced5b7938..c4ba486785c 100644 --- a/sound/pci/intel8x0.c +++ b/sound/pci/intel8x0.c @@ -2751,11 +2751,12 @@ static void __devinit intel8x0_measure_ac97_clock(struct intel8x0 *chip) if (pos == 0) { snd_printk(KERN_ERR "intel8x0: measure - unreliable DMA position..\n"); __retry: - if (attempt < 2) { + if (attempt < 3) { + msleep(300); attempt++; goto __again; } - return; + goto __end; } pos /= 4; @@ -2782,6 +2783,7 @@ static void __devinit intel8x0_measure_ac97_clock(struct intel8x0 *chip) else if (pos < 47500 || pos > 48500) /* not 48000Hz, tuning the clock.. */ chip->ac97_bus->clock = (chip->ac97_bus->clock * 48000) / pos; + __end: printk(KERN_INFO "intel8x0: clocking to %d\n", chip->ac97_bus->clock); snd_ac97_update_power(chip->ac97[0], AC97_PCM_FRONT_DAC_RATE, 0); } -- cgit v1.2.3 From 5bd3729f6818721f76a2a2f7d2ecad899bace340 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 21 Apr 2009 18:36:30 +0200 Subject: ALSA: hda - Add quirk for Packard Bell RS65 Added a quirk (model=m51va) for Packard Bell RS65 with ALC663. Reference: Novell bnc#496787 https://bugzilla.novell.com/show_bug.cgi?id=496787 Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index c9300a3427e..b8a0d3e7927 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -16464,6 +16464,7 @@ static struct snd_pci_quirk alc662_cfg_tbl[] = { SND_PCI_QUIRK(0x1458, 0xa002, "Gigabyte 945GCM-S2L", ALC662_3ST_6ch_DIG), SND_PCI_QUIRK(0x1565, 0x820f, "Biostar TA780G M2+", ALC662_3ST_6ch_DIG), + SND_PCI_QUIRK(0x1631, 0xc10c, "PB RS65", ALC663_ASUS_M51VA), SND_PCI_QUIRK(0x17aa, 0x101e, "Lenovo", ALC662_LENOVO_101E), SND_PCI_QUIRK(0x1849, 0x3662, "ASROCK K10N78FullHD-hSLI R3.0", ALC662_3ST_6ch_DIG), -- cgit v1.2.3 From 0dbbbf1a0e305ad900b733e2ba1cac304d31696e Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Sat, 18 Apr 2009 21:48:52 +0400 Subject: fsl_rio: Pass the proper device to dma mapping routines The driver should pass a device that specifies internal DMA ops, but currently NULL pointer is passed, therefore following bug appears during boot up: ------------[ cut here ]------------ Kernel BUG at c0018a7c [verbose debug info unavailable] Oops: Exception in kernel mode, sig: 5 [#1] [...] NIP [c0018a7c] fsl_rio_doorbell_init+0x34/0x60 LR [c0018a70] fsl_rio_doorbell_init+0x28/0x60 Call Trace: [ef82bda0] [c0018a70] fsl_rio_doorbell_init+0x28/0x60 (unreliable) [ef82bdc0] [c0019160] fsl_rio_setup+0x6b8/0x84c [ef82be20] [c02d28ac] fsl_of_rio_rpn_probe+0x30/0x50 [ef82be40] [c0234f20] of_platform_device_probe+0x5c/0x84 [...] ---[ end trace 561bb236c800851f ]--- This patch fixes the issue. Signed-off-by: Anton Vorontsov Signed-off-by: Kumar Gala --- arch/powerpc/sysdev/fsl_rio.c | 28 +++++++++++++++++----------- 1 file changed, 17 insertions(+), 11 deletions(-) diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c index a0fa4ebb39c..abdb124e1e2 100644 --- a/arch/powerpc/sysdev/fsl_rio.c +++ b/arch/powerpc/sysdev/fsl_rio.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include #include @@ -159,6 +160,7 @@ struct rio_msg_rx_ring { }; struct rio_priv { + struct device *dev; void __iomem *regs_win; struct rio_atmu_regs __iomem *atmu_regs; struct rio_atmu_regs __iomem *maint_atmu_regs; @@ -484,13 +486,13 @@ int rio_open_outb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entr for (i = 0; i < priv->msg_tx_ring.size; i++) { priv->msg_tx_ring.virt_buffer[i] = - dma_alloc_coherent(NULL, RIO_MSG_BUFFER_SIZE, + dma_alloc_coherent(priv->dev, RIO_MSG_BUFFER_SIZE, &priv->msg_tx_ring.phys_buffer[i], GFP_KERNEL); if (!priv->msg_tx_ring.virt_buffer[i]) { rc = -ENOMEM; for (j = 0; j < priv->msg_tx_ring.size; j++) if (priv->msg_tx_ring.virt_buffer[j]) - dma_free_coherent(NULL, + dma_free_coherent(priv->dev, RIO_MSG_BUFFER_SIZE, priv->msg_tx_ring. virt_buffer[j], @@ -501,7 +503,7 @@ int rio_open_outb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entr } /* Initialize outbound message descriptor ring */ - priv->msg_tx_ring.virt = dma_alloc_coherent(NULL, + priv->msg_tx_ring.virt = dma_alloc_coherent(priv->dev, priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE, &priv->msg_tx_ring.phys, GFP_KERNEL); if (!priv->msg_tx_ring.virt) { @@ -549,12 +551,13 @@ int rio_open_outb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entr return rc; out_irq: - dma_free_coherent(NULL, priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE, + dma_free_coherent(priv->dev, + priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE, priv->msg_tx_ring.virt, priv->msg_tx_ring.phys); out_dma: for (i = 0; i < priv->msg_tx_ring.size; i++) - dma_free_coherent(NULL, RIO_MSG_BUFFER_SIZE, + dma_free_coherent(priv->dev, RIO_MSG_BUFFER_SIZE, priv->msg_tx_ring.virt_buffer[i], priv->msg_tx_ring.phys_buffer[i]); @@ -576,7 +579,8 @@ void rio_close_outb_mbox(struct rio_mport *mport, int mbox) out_be32(&priv->msg_regs->omr, 0); /* Free ring */ - dma_free_coherent(NULL, priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE, + dma_free_coherent(priv->dev, + priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE, priv->msg_tx_ring.virt, priv->msg_tx_ring.phys); /* Free interrupt */ @@ -654,7 +658,7 @@ int rio_open_inb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entri priv->msg_rx_ring.virt_buffer[i] = NULL; /* Initialize inbound message ring */ - priv->msg_rx_ring.virt = dma_alloc_coherent(NULL, + priv->msg_rx_ring.virt = dma_alloc_coherent(priv->dev, priv->msg_rx_ring.size * RIO_MAX_MSG_SIZE, &priv->msg_rx_ring.phys, GFP_KERNEL); if (!priv->msg_rx_ring.virt) { @@ -673,7 +677,7 @@ int rio_open_inb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entri rc = request_irq(IRQ_RIO_RX(mport), fsl_rio_rx_handler, 0, "msg_rx", (void *)mport); if (rc < 0) { - dma_free_coherent(NULL, RIO_MSG_BUFFER_SIZE, + dma_free_coherent(priv->dev, RIO_MSG_BUFFER_SIZE, priv->msg_tx_ring.virt_buffer[i], priv->msg_tx_ring.phys_buffer[i]); goto out; @@ -713,7 +717,7 @@ void rio_close_inb_mbox(struct rio_mport *mport, int mbox) out_be32(&priv->msg_regs->imr, 0); /* Free ring */ - dma_free_coherent(NULL, priv->msg_rx_ring.size * RIO_MAX_MSG_SIZE, + dma_free_coherent(priv->dev, priv->msg_rx_ring.size * RIO_MAX_MSG_SIZE, priv->msg_rx_ring.virt, priv->msg_rx_ring.phys); /* Free interrupt */ @@ -890,7 +894,7 @@ static int fsl_rio_doorbell_init(struct rio_mport *mport) } /* Initialize inbound doorbells */ - priv->dbell_ring.virt = dma_alloc_coherent(NULL, 512 * + priv->dbell_ring.virt = dma_alloc_coherent(priv->dev, 512 * DOORBELL_MESSAGE_SIZE, &priv->dbell_ring.phys, GFP_KERNEL); if (!priv->dbell_ring.virt) { printk(KERN_ERR "RIO: unable allocate inbound doorbell ring\n"); @@ -911,7 +915,7 @@ static int fsl_rio_doorbell_init(struct rio_mport *mport) "dbell_rx", (void *)mport); if (rc < 0) { iounmap(priv->dbell_win); - dma_free_coherent(NULL, 512 * DOORBELL_MESSAGE_SIZE, + dma_free_coherent(priv->dev, 512 * DOORBELL_MESSAGE_SIZE, priv->dbell_ring.virt, priv->dbell_ring.phys); printk(KERN_ERR "MPC85xx RIO: unable to request inbound doorbell irq"); @@ -1087,6 +1091,8 @@ int fsl_rio_setup(struct of_device *dev) rio_init_mbox_res(&port->riores[RIO_OUTB_MBOX_RESOURCE], 0, 0); strcpy(port->name, "RIO0 mport"); + priv->dev = &dev->dev; + port->ops = ops; port->host_deviceid = fsl_rio_get_hdid(port->id); -- cgit v1.2.3 From 595e23f390b675a5a264af48a42eda81413f2598 Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Mon, 20 Apr 2009 10:54:35 -0500 Subject: powerpc: don't disable SATA interrupts on Freescale MPC8610 HPCD The ULI 1575 PCI quirk function for the Freescale MPC8610 HPCD was disabling the SATA INTx interrupt, even when SATA support was enabled. This was safe, because the SATA driver re-enabled it. But with commit a5bfc471 ("ahci: drop intx manipulation on msi enable"), the driver no longer does this, and so SATA support on the 8610 HPCD is broken. The original quirk function disabled INTx because it caused some other interrupt problem during early development on this board, but no one remembers any more what that problem was, and it doesn't seem to occur any more. Signed-off-by: Timur Tabi Signed-off-by: Kumar Gala --- arch/powerpc/platforms/fsl_uli1575.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/arch/powerpc/platforms/fsl_uli1575.c b/arch/powerpc/platforms/fsl_uli1575.c index 1db6b9e037f..65a35f38e06 100644 --- a/arch/powerpc/platforms/fsl_uli1575.c +++ b/arch/powerpc/platforms/fsl_uli1575.c @@ -275,11 +275,6 @@ static void __devinit hpcd_quirk_uli5288(struct pci_dev *dev) if (!machine_is(mpc86xx_hpcd)) return; - /* Interrupt Disable, Needed when SATA disabled */ - pci_read_config_word(dev, PCI_COMMAND, &temp); - temp |= 1<<10; - pci_write_config_word(dev, PCI_COMMAND, temp); - pci_read_config_byte(dev, 0x83, &c); c |= 0x80; pci_write_config_byte(dev, 0x83, c); -- cgit v1.2.3 From 4b6f764e148a194f792e75d43dc3504bc0d81064 Mon Sep 17 00:00:00 2001 From: Jay Sternberg Date: Mon, 20 Apr 2009 14:36:54 -0700 Subject: iwlwifi: fix EEPROM validation mask to include OTP only devices Fix the bug where some revisions of 6000 series hardware cannot be used. Later versions of 6000 series have the EEPROM replaced by OTP. For these devices to be used we need to expand valid EEPROM mask. Signed-off-by: Jay Sternberg Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-csr.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-csr.h b/drivers/net/wireless/iwlwifi/iwl-csr.h index 2f1242447b3..6e983149b83 100644 --- a/drivers/net/wireless/iwlwifi/iwl-csr.h +++ b/drivers/net/wireless/iwlwifi/iwl-csr.h @@ -223,7 +223,7 @@ #define CSR_EEPROM_REG_MSK_DATA (0xFFFF0000) /* EEPROM GP */ -#define CSR_EEPROM_GP_VALID_MSK (0x00000006) +#define CSR_EEPROM_GP_VALID_MSK (0x00000007) #define CSR_EEPROM_GP_BAD_SIGNATURE (0x00000000) #define CSR_EEPROM_GP_IF_OWNER_MSK (0x00000180) -- cgit v1.2.3 From 71d449b55abf5018d7c711b2b62abc0c083723c4 Mon Sep 17 00:00:00 2001 From: Reinette Chatre Date: Mon, 20 Apr 2009 14:37:01 -0700 Subject: iwl3945: use cancel_delayed_work_sync to cancel rfkill_poll Users reported lockup with work still trying to run after module has been unloaded. http://thread.gmane.org/gmane.linux.kernel.wireless.general/30594/focus=30601 Signed-off-by: Reinette Chatre Reported-by: TJ Reported-by: Huaxu Wan Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl3945-base.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index da61ecd6288..1299479f99d 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -5196,7 +5196,7 @@ static void __devexit iwl3945_pci_remove(struct pci_dev *pdev) sysfs_remove_group(&pdev->dev.kobj, &iwl3945_attribute_group); iwl_rfkill_unregister(priv); - cancel_delayed_work(&priv->rfkill_poll); + cancel_delayed_work_sync(&priv->rfkill_poll); iwl3945_dealloc_ucode_pci(priv); -- cgit v1.2.3 From 7d42081a271bd8a82f2100524085c4f029e47717 Mon Sep 17 00:00:00 2001 From: Reinette Chatre Date: Mon, 20 Apr 2009 15:36:19 -0700 Subject: mac80211: do not print WARN if config interface It is expected that config interface will always succeed as mac80211 will only request what driver supports. The exception here is when a device has rfkill enabled. At this time the rfkill state is unknown to mac80211 and config interface can fail. When this happens we deal with this error instead of printing a WARN. Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville --- net/mac80211/pm.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) diff --git a/net/mac80211/pm.c b/net/mac80211/pm.c index 02730232649..81985d27cbd 100644 --- a/net/mac80211/pm.c +++ b/net/mac80211/pm.c @@ -156,8 +156,19 @@ int __ieee80211_resume(struct ieee80211_hw *hw) case NL80211_IFTYPE_ADHOC: case NL80211_IFTYPE_AP: case NL80211_IFTYPE_MESH_POINT: - WARN_ON(ieee80211_if_config(sdata, changed)); - ieee80211_bss_info_change_notify(sdata, ~0); + /* + * Driver's config_interface can fail if rfkill is + * enabled. Accommodate this return code. + * FIXME: When mac80211 has knowledge of rfkill + * state the code below can change back to: + * WARN(ieee80211_if_config(sdata, changed)); + * ieee80211_bss_info_change_notify(sdata, ~0); + */ + if (ieee80211_if_config(sdata, changed)) + printk(KERN_DEBUG "%s: failed to configure interface during resume\n", + sdata->dev->name); + else + ieee80211_bss_info_change_notify(sdata, ~0); break; case NL80211_IFTYPE_WDS: break; -- cgit v1.2.3 From d1bcb9f1273adee6d2ce5edf84f19409a5cc31b9 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 21 Apr 2009 01:36:59 +0200 Subject: mac80211: fix alignment calculation bug When checking whether or not a given frame needs to be moved to be properly aligned to a 4-byte boundary, we use & 4 which wasn't intended, this code should check the lowest two bits. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- net/mac80211/rx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index 5fa7aedd90e..9776f73c51a 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -1397,7 +1397,7 @@ ieee80211_deliver_skb(struct ieee80211_rx_data *rx) * mac80211. That also explains the __skb_push() * below. */ - align = (unsigned long)skb->data & 4; + align = (unsigned long)skb->data & 3; if (align) { if (WARN_ON(skb_headroom(skb) < 3)) { dev_kfree_skb(skb); -- cgit v1.2.3 From c491bf1205485c83086bf4f2f26ca6598d48133a Mon Sep 17 00:00:00 2001 From: Rami Rosen Date: Tue, 21 Apr 2009 16:22:01 +0300 Subject: mwl8: fix build warning. This patch fixes a build warning in mwl8.c. (Marvell TOPDOG wireless driver) The warning it fixes is: "large integer implicitly truncated to unsigned type." The rx_ctrl member of the mwl8k_rx_desc struct is 8 bit (__u8 ), whereas trying to assign it a 32 bit value (which is returned from cpu_to_le32()) causes the compiler to issue a truncation warning. Signed-off-by: Rami Rosen Signed-off-by: John W. Linville --- drivers/net/wireless/mwl8k.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c index b5dbf6d9e51..a9a970469c2 100644 --- a/drivers/net/wireless/mwl8k.c +++ b/drivers/net/wireless/mwl8k.c @@ -893,8 +893,7 @@ static int mwl8k_rxq_init(struct ieee80211_hw *hw, int index) rx_desc->next_rx_desc_phys_addr = cpu_to_le32(rxq->rx_desc_dma + nexti * sizeof(*rx_desc)); - rx_desc->rx_ctrl = - cpu_to_le32(MWL8K_RX_CTRL_OWNED_BY_HOST); + rx_desc->rx_ctrl = MWL8K_RX_CTRL_OWNED_BY_HOST; } return 0; -- cgit v1.2.3 From d2ee9cd2e2bdfa2e5817142d6f044697066d3977 Mon Sep 17 00:00:00 2001 From: Reinette Chatre Date: Tue, 21 Apr 2009 10:55:47 -0700 Subject: iwlwifi: add debugging for TX path When debugging TX issues it is helpful to know the seq nr of the frame being transmitted. The seq nr is printed as part of ucode's log informing us which frame is being processed. Having this information printed in driver log makes it easy to match activities between driver and firmware. Also make possible to print TX flags directly. These are already printed as part of entire TX command, but having it printed directly in cpu format makes it easier to look at. Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-tx.c | 4 +++- drivers/net/wireless/iwlwifi/iwl3945-base.c | 4 +++- 2 files changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c index 1f117a49c56..8ef53e28176 100644 --- a/drivers/net/wireless/iwlwifi/iwl-tx.c +++ b/drivers/net/wireless/iwlwifi/iwl-tx.c @@ -875,8 +875,10 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb) txq->need_update = 0; } + IWL_DEBUG_TX(priv, "sequence nr = 0X%x \n", + le16_to_cpu(out_cmd->hdr.sequence)); + IWL_DEBUG_TX(priv, "tx_flags = 0X%x \n", le32_to_cpu(tx_cmd->tx_flags)); iwl_print_hex_dump(priv, IWL_DL_TX, (u8 *)tx_cmd, sizeof(*tx_cmd)); - iwl_print_hex_dump(priv, IWL_DL_TX, (u8 *)tx_cmd->hdr, hdr_len); /* Set up entry for this TFD in Tx byte-count array */ diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index 1299479f99d..acefc372126 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -1146,8 +1146,10 @@ static int iwl3945_tx_skb(struct iwl_priv *priv, struct sk_buff *skb) txq->need_update = 0; } + IWL_DEBUG_TX(priv, "sequence nr = 0X%x \n", + le16_to_cpu(out_cmd->hdr.sequence)); + IWL_DEBUG_TX(priv, "tx_flags = 0X%x \n", le32_to_cpu(tx->tx_flags)); iwl_print_hex_dump(priv, IWL_DL_TX, tx, sizeof(*tx)); - iwl_print_hex_dump(priv, IWL_DL_TX, (u8 *)tx->hdr, ieee80211_hdrlen(fc)); -- cgit v1.2.3 From df833b1d73680f9f9dc72cbc3215edbbc6ab740d Mon Sep 17 00:00:00 2001 From: Reinette Chatre Date: Tue, 21 Apr 2009 10:55:48 -0700 Subject: iwlwifi: DMA fixes A few issues wrt DMA were uncovered when using the driver with swiotlb. - driver should not use memory after it has been mapped - iwl3945's RX queue management cannot use all of iwlagn because the size of the RX buffer is different. Revert back to using iwl3945 specific routines that map/unmap memory. - no need to "dma_syn_single_range_for_cpu" followed by pci_unmap_single, we can just call pci_unmap_single initially - only map the memory area that will be used by device. this is especially relevant to the mapping of iwl_cmd. we should not map the entire structure because the meta data at the beginning of structure contains the address to be used later for unmapping. If the address to be used for unmapping is stored in mapped data it creates a problem. - ensure that _if_ memory needs to be modified after it is mapped that we call _sync_single_for_cpu first, and then release it back to device with _sync_single_for_device - we mapped the wrong length of data for host commands, with mapped length differing with length provided to device, fix that. Thanks to Jason Andryuk for significant bisecting help to find these issues. This fixes http://www.intellinuxwireless.org/bugzilla/show_bug.cgi?id=1964 Signed-off-by: Reinette Chatre Tested-by: Jason Andryuk Tested-by: Ben Gamari Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-3945.c | 2 +- drivers/net/wireless/iwlwifi/iwl-3945.h | 1 + drivers/net/wireless/iwlwifi/iwl-agn.c | 11 +-- drivers/net/wireless/iwlwifi/iwl-dev.h | 4 + drivers/net/wireless/iwlwifi/iwl-tx.c | 95 ++++++++++-------- drivers/net/wireless/iwlwifi/iwl3945-base.c | 148 +++++++++++++++++++--------- 6 files changed, 165 insertions(+), 96 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c index 2399328e8de..527525cc091 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945.c +++ b/drivers/net/wireless/iwlwifi/iwl-3945.c @@ -1192,7 +1192,7 @@ int iwl3945_hw_nic_init(struct iwl_priv *priv) return -ENOMEM; } } else - iwl_rx_queue_reset(priv, rxq); + iwl3945_rx_queue_reset(priv, rxq); iwl3945_rx_replenish(priv); diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.h b/drivers/net/wireless/iwlwifi/iwl-3945.h index ab7aaf6872c..55188844657 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945.h +++ b/drivers/net/wireless/iwlwifi/iwl-3945.h @@ -215,6 +215,7 @@ extern int iwl3945_calc_sig_qual(int rssi_dbm, int noise_dbm); extern int iwl3945_tx_queue_init(struct iwl_priv *priv, struct iwl_tx_queue *txq, int count, u32 id); extern void iwl3945_rx_replenish(void *data); +extern void iwl3945_rx_queue_reset(struct iwl_priv *priv, struct iwl_rx_queue *rxq); extern void iwl3945_tx_queue_free(struct iwl_priv *priv, struct iwl_tx_queue *txq); extern int iwl3945_send_cmd_pdu(struct iwl_priv *priv, u8 id, u16 len, const void *data); diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index 3889158b359..1ef4192207a 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -976,11 +976,9 @@ void iwl_rx_handle(struct iwl_priv *priv) rxq->queue[i] = NULL; - dma_sync_single_range_for_cpu( - &priv->pci_dev->dev, rxb->real_dma_addr, - rxb->aligned_dma_addr - rxb->real_dma_addr, - priv->hw_params.rx_buf_size, - PCI_DMA_FROMDEVICE); + pci_unmap_single(priv->pci_dev, rxb->real_dma_addr, + priv->hw_params.rx_buf_size + 256, + PCI_DMA_FROMDEVICE); pkt = (struct iwl_rx_packet *)rxb->skb->data; /* Reclaim a command buffer only if this packet is a response @@ -1031,9 +1029,6 @@ void iwl_rx_handle(struct iwl_priv *priv) rxb->skb = NULL; } - pci_unmap_single(priv->pci_dev, rxb->real_dma_addr, - priv->hw_params.rx_buf_size + 256, - PCI_DMA_FROMDEVICE); spin_lock_irqsave(&rxq->lock, flags); list_add_tail(&rxb->list, &priv->rxq.rx_used); spin_unlock_irqrestore(&rxq->lock, flags); diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h index ec9a13846ed..cf7f0db58fc 100644 --- a/drivers/net/wireless/iwlwifi/iwl-dev.h +++ b/drivers/net/wireless/iwlwifi/iwl-dev.h @@ -360,12 +360,16 @@ struct iwl_host_cmd { /** * struct iwl_rx_queue - Rx queue + * @bd: driver's pointer to buffer of receive buffer descriptors (rbd) + * @dma_addr: bus address of buffer of receive buffer descriptors (rbd) * @read: Shared index to newest available Rx buffer * @write: Shared index to oldest written Rx packet * @free_count: Number of pre-allocated buffers in rx_free * @rx_free: list of free SKBs for use * @rx_used: List of Rx buffers with no SKB * @need_update: flag to indicate we need to update read/write index + * @rb_stts: driver's pointer to receive buffer status + * @rb_stts_dma: bus address of receive buffer status * * NOTE: rx_free and rx_used are used as a FIFO for iwl_rx_mem_buffers */ diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c index 8ef53e28176..71d5b8a1a73 100644 --- a/drivers/net/wireless/iwlwifi/iwl-tx.c +++ b/drivers/net/wireless/iwlwifi/iwl-tx.c @@ -799,6 +799,22 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb) /* Copy MAC header from skb into command buffer */ memcpy(tx_cmd->hdr, hdr, hdr_len); + + /* Total # bytes to be transmitted */ + len = (u16)skb->len; + tx_cmd->len = cpu_to_le16(len); + + if (info->control.hw_key) + iwl_tx_cmd_build_hwcrypto(priv, info, tx_cmd, skb, sta_id); + + /* TODO need this for burst mode later on */ + iwl_tx_cmd_build_basic(priv, tx_cmd, info, hdr, sta_id); + + /* set is_hcca to 0; it probably will never be implemented */ + iwl_tx_cmd_build_rate(priv, tx_cmd, info, fc, sta_id, 0); + + iwl_update_tx_stats(priv, le16_to_cpu(fc), len); + /* * Use the first empty entry in this queue's command buffer array * to contain the Tx command and MAC header concatenated together @@ -819,21 +835,30 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb) else len_org = 0; + /* Tell NIC about any 2-byte padding after MAC header */ + if (len_org) + tx_cmd->tx_flags |= TX_CMD_FLG_MH_PAD_MSK; + /* Physical address of this Tx command's header (not MAC header!), * within command buffer array. */ txcmd_phys = pci_map_single(priv->pci_dev, - out_cmd, sizeof(struct iwl_cmd), + &out_cmd->hdr, len, PCI_DMA_BIDIRECTIONAL); pci_unmap_addr_set(&out_cmd->meta, mapping, txcmd_phys); - pci_unmap_len_set(&out_cmd->meta, len, sizeof(struct iwl_cmd)); + pci_unmap_len_set(&out_cmd->meta, len, len); /* Add buffer containing Tx command and MAC(!) header to TFD's * first entry */ - txcmd_phys += offsetof(struct iwl_cmd, hdr); priv->cfg->ops->lib->txq_attach_buf_to_tfd(priv, txq, txcmd_phys, len, 1, 0); - if (info->control.hw_key) - iwl_tx_cmd_build_hwcrypto(priv, info, tx_cmd, skb, sta_id); + if (!ieee80211_has_morefrags(hdr->frame_control)) { + txq->need_update = 1; + if (qc) + priv->stations[sta_id].tid[tid].seq_number = seq_number; + } else { + wait_write_ptr = 1; + txq->need_update = 0; + } /* Set up TFD's 2nd entry to point directly to remainder of skb, * if any (802.11 null frames have no payload). */ @@ -846,35 +871,17 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb) 0, 0); } - /* Tell NIC about any 2-byte padding after MAC header */ - if (len_org) - tx_cmd->tx_flags |= TX_CMD_FLG_MH_PAD_MSK; - - /* Total # bytes to be transmitted */ - len = (u16)skb->len; - tx_cmd->len = cpu_to_le16(len); - /* TODO need this for burst mode later on */ - iwl_tx_cmd_build_basic(priv, tx_cmd, info, hdr, sta_id); - - /* set is_hcca to 0; it probably will never be implemented */ - iwl_tx_cmd_build_rate(priv, tx_cmd, info, fc, sta_id, 0); - - iwl_update_tx_stats(priv, le16_to_cpu(fc), len); - scratch_phys = txcmd_phys + sizeof(struct iwl_cmd_header) + - offsetof(struct iwl_tx_cmd, scratch); + offsetof(struct iwl_tx_cmd, scratch); + + len = sizeof(struct iwl_tx_cmd) + + sizeof(struct iwl_cmd_header) + hdr_len; + /* take back ownership of DMA buffer to enable update */ + pci_dma_sync_single_for_cpu(priv->pci_dev, txcmd_phys, + len, PCI_DMA_BIDIRECTIONAL); tx_cmd->dram_lsb_ptr = cpu_to_le32(scratch_phys); tx_cmd->dram_msb_ptr = iwl_get_dma_hi_addr(scratch_phys); - if (!ieee80211_has_morefrags(hdr->frame_control)) { - txq->need_update = 1; - if (qc) - priv->stations[sta_id].tid[tid].seq_number = seq_number; - } else { - wait_write_ptr = 1; - txq->need_update = 0; - } - IWL_DEBUG_TX(priv, "sequence nr = 0X%x \n", le16_to_cpu(out_cmd->hdr.sequence)); IWL_DEBUG_TX(priv, "tx_flags = 0X%x \n", le32_to_cpu(tx_cmd->tx_flags)); @@ -882,7 +889,11 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb) iwl_print_hex_dump(priv, IWL_DL_TX, (u8 *)tx_cmd->hdr, hdr_len); /* Set up entry for this TFD in Tx byte-count array */ - priv->cfg->ops->lib->txq_update_byte_cnt_tbl(priv, txq, len); + priv->cfg->ops->lib->txq_update_byte_cnt_tbl(priv, txq, + le16_to_cpu(tx_cmd->len)); + + pci_dma_sync_single_for_device(priv->pci_dev, txcmd_phys, + len, PCI_DMA_BIDIRECTIONAL); /* Tell device the write index *just past* this latest filled TFD */ q->write_ptr = iwl_queue_inc_wrap(q->write_ptr, q->n_bd); @@ -970,18 +981,9 @@ int iwl_enqueue_hcmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd) INDEX_TO_SEQ(q->write_ptr)); if (out_cmd->meta.flags & CMD_SIZE_HUGE) out_cmd->hdr.sequence |= SEQ_HUGE_FRAME; - len = (idx == TFD_CMD_SLOTS) ? - IWL_MAX_SCAN_SIZE : sizeof(struct iwl_cmd); + len = sizeof(struct iwl_cmd) - sizeof(struct iwl_cmd_meta); + len += (idx == TFD_CMD_SLOTS) ? IWL_MAX_SCAN_SIZE : 0; - phys_addr = pci_map_single(priv->pci_dev, out_cmd, - len, PCI_DMA_BIDIRECTIONAL); - pci_unmap_addr_set(&out_cmd->meta, mapping, phys_addr); - pci_unmap_len_set(&out_cmd->meta, len, len); - phys_addr += offsetof(struct iwl_cmd, hdr); - - priv->cfg->ops->lib->txq_attach_buf_to_tfd(priv, txq, - phys_addr, fix_size, 1, - U32_PAD(cmd->len)); #ifdef CONFIG_IWLWIFI_DEBUG switch (out_cmd->hdr.cmd) { @@ -1009,6 +1011,15 @@ int iwl_enqueue_hcmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd) /* Set up entry in queue's byte count circular buffer */ priv->cfg->ops->lib->txq_update_byte_cnt_tbl(priv, txq, 0); + phys_addr = pci_map_single(priv->pci_dev, &out_cmd->hdr, + fix_size, PCI_DMA_BIDIRECTIONAL); + pci_unmap_addr_set(&out_cmd->meta, mapping, phys_addr); + pci_unmap_len_set(&out_cmd->meta, len, fix_size); + + priv->cfg->ops->lib->txq_attach_buf_to_tfd(priv, txq, + phys_addr, fix_size, 1, + U32_PAD(cmd->len)); + /* Increment and update queue's write index */ q->write_ptr = iwl_queue_inc_wrap(q->write_ptr, q->n_bd); ret = iwl_txq_update_write_ptr(priv, txq); diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index acefc372126..617c4235d97 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -972,7 +972,7 @@ static int iwl3945_tx_skb(struct iwl_priv *priv, struct sk_buff *skb) dma_addr_t phys_addr; dma_addr_t txcmd_phys; int txq_id = skb_get_queue_mapping(skb); - u16 len, idx, len_org, hdr_len; + u16 len, idx, len_org, hdr_len; /* TODO: len_org is not used */ u8 id; u8 unicast; u8 sta_id; @@ -1074,6 +1074,40 @@ static int iwl3945_tx_skb(struct iwl_priv *priv, struct sk_buff *skb) /* Copy MAC header from skb into command buffer */ memcpy(tx->hdr, hdr, hdr_len); + + if (info->control.hw_key) + iwl3945_build_tx_cmd_hwcrypto(priv, info, out_cmd, skb, sta_id); + + /* TODO need this for burst mode later on */ + iwl3945_build_tx_cmd_basic(priv, out_cmd, info, hdr, sta_id); + + /* set is_hcca to 0; it probably will never be implemented */ + iwl3945_hw_build_tx_cmd_rate(priv, out_cmd, info, hdr, sta_id, 0); + + /* Total # bytes to be transmitted */ + len = (u16)skb->len; + tx->len = cpu_to_le16(len); + + + tx->tx_flags &= ~TX_CMD_FLG_ANT_A_MSK; + tx->tx_flags &= ~TX_CMD_FLG_ANT_B_MSK; + + if (!ieee80211_has_morefrags(hdr->frame_control)) { + txq->need_update = 1; + if (qc) + priv->stations_39[sta_id].tid[tid].seq_number = seq_number; + } else { + wait_write_ptr = 1; + txq->need_update = 0; + } + + IWL_DEBUG_TX(priv, "sequence nr = 0X%x \n", + le16_to_cpu(out_cmd->hdr.sequence)); + IWL_DEBUG_TX(priv, "tx_flags = 0X%x \n", le32_to_cpu(tx->tx_flags)); + iwl_print_hex_dump(priv, IWL_DL_TX, tx, sizeof(*tx)); + iwl_print_hex_dump(priv, IWL_DL_TX, (u8 *)tx->hdr, + ieee80211_hdrlen(fc)); + /* * Use the first empty entry in this queue's command buffer array * to contain the Tx command and MAC header concatenated together @@ -1096,22 +1130,18 @@ static int iwl3945_tx_skb(struct iwl_priv *priv, struct sk_buff *skb) /* Physical address of this Tx command's header (not MAC header!), * within command buffer array. */ - txcmd_phys = pci_map_single(priv->pci_dev, - out_cmd, sizeof(struct iwl_cmd), - PCI_DMA_TODEVICE); + txcmd_phys = pci_map_single(priv->pci_dev, &out_cmd->hdr, + len, PCI_DMA_TODEVICE); + /* we do not map meta data ... so we can safely access address to + * provide to unmap command*/ pci_unmap_addr_set(&out_cmd->meta, mapping, txcmd_phys); - pci_unmap_len_set(&out_cmd->meta, len, sizeof(struct iwl_cmd)); - /* Add buffer containing Tx command and MAC(!) header to TFD's - * first entry */ - txcmd_phys += offsetof(struct iwl_cmd, hdr); + pci_unmap_len_set(&out_cmd->meta, len, len); /* Add buffer containing Tx command and MAC(!) header to TFD's * first entry */ priv->cfg->ops->lib->txq_attach_buf_to_tfd(priv, txq, txcmd_phys, len, 1, 0); - if (info->control.hw_key) - iwl3945_build_tx_cmd_hwcrypto(priv, info, out_cmd, skb, sta_id); /* Set up TFD's 2nd entry to point directly to remainder of skb, * if any (802.11 null frames have no payload). */ @@ -1124,34 +1154,6 @@ static int iwl3945_tx_skb(struct iwl_priv *priv, struct sk_buff *skb) 0, U32_PAD(len)); } - /* Total # bytes to be transmitted */ - len = (u16)skb->len; - tx->len = cpu_to_le16(len); - - /* TODO need this for burst mode later on */ - iwl3945_build_tx_cmd_basic(priv, out_cmd, info, hdr, sta_id); - - /* set is_hcca to 0; it probably will never be implemented */ - iwl3945_hw_build_tx_cmd_rate(priv, out_cmd, info, hdr, sta_id, 0); - - tx->tx_flags &= ~TX_CMD_FLG_ANT_A_MSK; - tx->tx_flags &= ~TX_CMD_FLG_ANT_B_MSK; - - if (!ieee80211_has_morefrags(hdr->frame_control)) { - txq->need_update = 1; - if (qc) - priv->stations_39[sta_id].tid[tid].seq_number = seq_number; - } else { - wait_write_ptr = 1; - txq->need_update = 0; - } - - IWL_DEBUG_TX(priv, "sequence nr = 0X%x \n", - le16_to_cpu(out_cmd->hdr.sequence)); - IWL_DEBUG_TX(priv, "tx_flags = 0X%x \n", le32_to_cpu(tx->tx_flags)); - iwl_print_hex_dump(priv, IWL_DL_TX, tx, sizeof(*tx)); - iwl_print_hex_dump(priv, IWL_DL_TX, (u8 *)tx->hdr, - ieee80211_hdrlen(fc)); /* Tell device the write index *just past* this latest filled TFD */ q->write_ptr = iwl_queue_inc_wrap(q->write_ptr, q->n_bd); @@ -1663,6 +1665,37 @@ static void iwl3945_rx_allocate(struct iwl_priv *priv) spin_unlock_irqrestore(&rxq->lock, flags); } +void iwl3945_rx_queue_reset(struct iwl_priv *priv, struct iwl_rx_queue *rxq) +{ + unsigned long flags; + int i; + spin_lock_irqsave(&rxq->lock, flags); + INIT_LIST_HEAD(&rxq->rx_free); + INIT_LIST_HEAD(&rxq->rx_used); + /* Fill the rx_used queue with _all_ of the Rx buffers */ + for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++) { + /* In the reset function, these buffers may have been allocated + * to an SKB, so we need to unmap and free potential storage */ + if (rxq->pool[i].skb != NULL) { + pci_unmap_single(priv->pci_dev, + rxq->pool[i].real_dma_addr, + priv->hw_params.rx_buf_size, + PCI_DMA_FROMDEVICE); + priv->alloc_rxb_skb--; + dev_kfree_skb(rxq->pool[i].skb); + rxq->pool[i].skb = NULL; + } + list_add_tail(&rxq->pool[i].list, &rxq->rx_used); + } + + /* Set us so that we have processed and used all buffers, but have + * not restocked the Rx queue with fresh buffers */ + rxq->read = rxq->write = 0; + rxq->free_count = 0; + spin_unlock_irqrestore(&rxq->lock, flags); +} +EXPORT_SYMBOL(iwl3945_rx_queue_reset); + /* * this should be called while priv->lock is locked */ @@ -1687,6 +1720,34 @@ void iwl3945_rx_replenish(void *data) spin_unlock_irqrestore(&priv->lock, flags); } +/* Assumes that the skb field of the buffers in 'pool' is kept accurate. + * If an SKB has been detached, the POOL needs to have its SKB set to NULL + * This free routine walks the list of POOL entries and if SKB is set to + * non NULL it is unmapped and freed + */ +static void iwl3945_rx_queue_free(struct iwl_priv *priv, struct iwl_rx_queue *rxq) +{ + int i; + for (i = 0; i < RX_QUEUE_SIZE + RX_FREE_BUFFERS; i++) { + if (rxq->pool[i].skb != NULL) { + pci_unmap_single(priv->pci_dev, + rxq->pool[i].real_dma_addr, + priv->hw_params.rx_buf_size, + PCI_DMA_FROMDEVICE); + dev_kfree_skb(rxq->pool[i].skb); + } + } + + pci_free_consistent(priv->pci_dev, 4 * RX_QUEUE_SIZE, rxq->bd, + rxq->dma_addr); + pci_free_consistent(priv->pci_dev, sizeof(struct iwl_rb_status), + rxq->rb_stts, rxq->rb_stts_dma); + rxq->bd = NULL; + rxq->rb_stts = NULL; +} +EXPORT_SYMBOL(iwl3945_rx_queue_free); + + /* Convert linear signal-to-noise ratio into dB */ static u8 ratio2dB[100] = { /* 0 1 2 3 4 5 6 7 8 9 */ @@ -1804,9 +1865,9 @@ static void iwl3945_rx_handle(struct iwl_priv *priv) rxq->queue[i] = NULL; - pci_dma_sync_single_for_cpu(priv->pci_dev, rxb->real_dma_addr, - priv->hw_params.rx_buf_size, - PCI_DMA_FROMDEVICE); + pci_unmap_single(priv->pci_dev, rxb->real_dma_addr, + priv->hw_params.rx_buf_size, + PCI_DMA_FROMDEVICE); pkt = (struct iwl_rx_packet *)rxb->skb->data; /* Reclaim a command buffer only if this packet is a response @@ -1854,9 +1915,6 @@ static void iwl3945_rx_handle(struct iwl_priv *priv) rxb->skb = NULL; } - pci_unmap_single(priv->pci_dev, rxb->real_dma_addr, - priv->hw_params.rx_buf_size, - PCI_DMA_FROMDEVICE); spin_lock_irqsave(&rxq->lock, flags); list_add_tail(&rxb->list, &priv->rxq.rx_used); spin_unlock_irqrestore(&rxq->lock, flags); @@ -5203,7 +5261,7 @@ static void __devexit iwl3945_pci_remove(struct pci_dev *pdev) iwl3945_dealloc_ucode_pci(priv); if (priv->rxq.bd) - iwl_rx_queue_free(priv, &priv->rxq); + iwl3945_rx_queue_free(priv, &priv->rxq); iwl3945_hw_txq_ctx_free(priv); iwl3945_unset_hw_params(priv); -- cgit v1.2.3 From 778544e59857bed3f8c152e3c8755b12f7f3971f Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Wed, 15 Apr 2009 16:10:20 -0500 Subject: powerpc/85xx: Updated generic mpc85xx_defconfig Signed-off-by: Kumar Gala --- arch/powerpc/configs/mpc85xx_defconfig | 213 ++++++++++++++------------------- 1 file changed, 88 insertions(+), 125 deletions(-) diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig index fb08819d7cc..6a3ea1aa296 100644 --- a/arch/powerpc/configs/mpc85xx_defconfig +++ b/arch/powerpc/configs/mpc85xx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:35:37 2009 +# Linux kernel version: 2.6.30-rc2 +# Tue Apr 21 15:38:23 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set CONFIG_PPC32=y @@ -59,6 +60,7 @@ CONFIG_GENERIC_BUG=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -73,11 +75,21 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set CONFIG_AUDIT=y # CONFIG_AUDITSYSCALL is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -93,22 +105,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y -CONFIG_KALLSYMS_STRIP_GENERATED=y CONFIG_KALLSYMS_EXTRA_PASS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -118,10 +132,12 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -130,6 +146,7 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -142,7 +159,6 @@ CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y CONFIG_LBD=y -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -158,11 +174,6 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -178,6 +189,7 @@ CONFIG_MPC85xx_CDS=y CONFIG_MPC85xx_MDS=y CONFIG_MPC8536_DS=y CONFIG_MPC85xx_DS=y +# CONFIG_SOCRATES is not set CONFIG_KSI8560=y # CONFIG_STX_GP3 is not set CONFIG_TQM8540=y @@ -249,9 +261,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -278,6 +293,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -291,17 +307,17 @@ CONFIG_ARCH_SUPPORTS_MSI=y # Default settings for advanced configuration options are used # CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_LOWMEM_CAM_NUM=3 CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 CONFIG_PHYSICAL_START=0x00000000 -CONFIG_PHYSICAL_ALIGN=0x10000000 +CONFIG_PHYSICAL_ALIGN=0x04000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -389,6 +405,7 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -401,7 +418,6 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_FIB_RULES=y CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set @@ -456,13 +472,20 @@ CONFIG_BLK_DEV_RAM_SIZE=131072 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +CONFIG_EEPROM_LEGACY=y +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -521,9 +544,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -546,6 +571,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -622,6 +648,7 @@ CONFIG_PATA_ALI=y # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=y # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -655,6 +682,8 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -675,6 +704,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -685,11 +715,13 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y # CONFIG_UCC_GETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set @@ -699,6 +731,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set @@ -708,6 +741,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_BNX2X is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set # @@ -715,7 +749,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -885,12 +918,9 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -CONFIG_EEPROM_LEGACY=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -969,7 +999,7 @@ CONFIG_VIDEO_MEDIA=m # # CONFIG_MEDIA_ATTACH is not set CONFIG_MEDIA_TUNER=m -# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set +# CONFIG_MEDIA_TUNER_CUSTOMISE is not set CONFIG_MEDIA_TUNER_SIMPLE=m CONFIG_MEDIA_TUNER_TDA8290=m CONFIG_MEDIA_TUNER_TDA9887=m @@ -978,6 +1008,7 @@ CONFIG_MEDIA_TUNER_TEA5767=m CONFIG_MEDIA_TUNER_MT20XX=m CONFIG_MEDIA_TUNER_XC2028=m CONFIG_MEDIA_TUNER_XC5000=m +CONFIG_MEDIA_TUNER_MC44S803=m # CONFIG_DVB_DYNAMIC_MINORS is not set CONFIG_DVB_CAPTURE_DRIVERS=y @@ -1017,103 +1048,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # # Supported DVB Frontends # - -# -# Customise DVB Frontends -# # CONFIG_DVB_FE_CUSTOMISE is not set - -# -# Multistandard (satellite) frontends -# -# CONFIG_DVB_STB0899 is not set -# CONFIG_DVB_STB6100 is not set - -# -# DVB-S (satellite) frontends -# -# CONFIG_DVB_CX24110 is not set -# CONFIG_DVB_CX24123 is not set -# CONFIG_DVB_MT312 is not set -# CONFIG_DVB_S5H1420 is not set -# CONFIG_DVB_STV0288 is not set -# CONFIG_DVB_STB6000 is not set -# CONFIG_DVB_STV0299 is not set -# CONFIG_DVB_TDA8083 is not set -# CONFIG_DVB_TDA10086 is not set -# CONFIG_DVB_TDA8261 is not set -# CONFIG_DVB_VES1X93 is not set -# CONFIG_DVB_TUNER_ITD1000 is not set -# CONFIG_DVB_TUNER_CX24113 is not set -# CONFIG_DVB_TDA826X is not set -# CONFIG_DVB_TUA6100 is not set -# CONFIG_DVB_CX24116 is not set -# CONFIG_DVB_SI21XX is not set - -# -# DVB-T (terrestrial) frontends -# -# CONFIG_DVB_SP8870 is not set -# CONFIG_DVB_SP887X is not set -# CONFIG_DVB_CX22700 is not set -# CONFIG_DVB_CX22702 is not set -# CONFIG_DVB_DRX397XD is not set -# CONFIG_DVB_L64781 is not set -# CONFIG_DVB_TDA1004X is not set -# CONFIG_DVB_NXT6000 is not set -# CONFIG_DVB_MT352 is not set -# CONFIG_DVB_ZL10353 is not set -# CONFIG_DVB_DIB3000MB is not set -# CONFIG_DVB_DIB3000MC is not set -# CONFIG_DVB_DIB7000M is not set -# CONFIG_DVB_DIB7000P is not set -# CONFIG_DVB_TDA10048 is not set - -# -# DVB-C (cable) frontends -# -# CONFIG_DVB_VES1820 is not set -# CONFIG_DVB_TDA10021 is not set -# CONFIG_DVB_TDA10023 is not set -# CONFIG_DVB_STV0297 is not set - -# -# ATSC (North American/Korean Terrestrial/Cable DTV) frontends -# -# CONFIG_DVB_NXT200X is not set -# CONFIG_DVB_OR51211 is not set -# CONFIG_DVB_OR51132 is not set -# CONFIG_DVB_BCM3510 is not set -# CONFIG_DVB_LGDT330X is not set -# CONFIG_DVB_LGDT3304 is not set -# CONFIG_DVB_S5H1409 is not set -# CONFIG_DVB_AU8522 is not set -# CONFIG_DVB_S5H1411 is not set - -# -# ISDB-T (terrestrial) frontends -# -# CONFIG_DVB_S921 is not set - -# -# Digital terrestrial only tuners/PLL -# -# CONFIG_DVB_PLL is not set -# CONFIG_DVB_TUNER_DIB0070 is not set - -# -# SEC control devices for DVB-S -# -# CONFIG_DVB_LNBP21 is not set -# CONFIG_DVB_ISL6405 is not set -# CONFIG_DVB_ISL6421 is not set -# CONFIG_DVB_LGS8GL5 is not set - -# -# Tools to develop new frontends -# -# CONFIG_DVB_DUMMY_FE is not set -# CONFIG_DVB_AF9013 is not set CONFIG_DAB=y # CONFIG_USB_DABUSB is not set @@ -1193,6 +1128,8 @@ CONFIG_SND_PCI=y # CONFIG_SND_INDIGO is not set # CONFIG_SND_INDIGOIO is not set # CONFIG_SND_INDIGODJ is not set +# CONFIG_SND_INDIGOIOX is not set +# CONFIG_SND_INDIGODJX is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_EMU10K1X is not set # CONFIG_SND_ENS1370 is not set @@ -1247,15 +1184,17 @@ CONFIG_USB_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y +# CONFIG_DRAGONRISE_FF is not set CONFIG_HID_EZKEY=y +# CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y +# CONFIG_HID_KENSINGTON is not set CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set @@ -1329,11 +1268,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -1375,7 +1314,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1392,6 +1330,7 @@ CONFIG_USB_STORAGE=y # OTG and related infrastructure # # CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1406,6 +1345,8 @@ CONFIG_EDAC=y # CONFIG_EDAC_DEBUG is not set CONFIG_EDAC_MM_EDAC=y CONFIG_EDAC_MPC85XX=y +# CONFIG_EDAC_AMD8131 is not set +# CONFIG_EDAC_AMD8111 is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -1460,7 +1401,7 @@ CONFIG_RTC_DRV_CMOS=y # # on-CPU RTC drivers # -# CONFIG_RTC_DRV_PPC is not set +# CONFIG_RTC_DRV_GENERIC is not set CONFIG_DMADEVICES=y # @@ -1473,7 +1414,9 @@ CONFIG_DMA_ENGINE=y # DMA Clients # # CONFIG_NET_DMA is not set +# CONFIG_ASYNC_TX_DMA is not set # CONFIG_DMATEST is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1484,6 +1427,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1507,6 +1451,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1562,6 +1511,7 @@ CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1577,7 +1527,6 @@ CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1648,6 +1597,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=m # CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -1662,11 +1612,12 @@ CONFIG_CRC32=y # CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1684,6 +1635,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1714,9 +1668,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1724,17 +1681,20 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1765,10 +1725,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1837,6 +1799,7 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # -- cgit v1.2.3 From 8db3dca86e0a1b74b87ffb612f1e57c481a122b9 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Tue, 21 Apr 2009 15:40:51 -0500 Subject: powerpc/85xx: Enabled a bunch of FSL specific drivers/options * Add new 85xx boards * Added QE/FSL gpio * Enabled PHY drivers that exist on various boards * Enabled FS_ENET & UCC ethernet drivers (CPM2 & QE) * FSL HW Crypto Engine * CPM I2C * QE Serial Signed-off-by: Kumar Gala --- arch/powerpc/configs/mpc85xx_defconfig | 43 +++++++++++++++++++++------------- 1 file changed, 27 insertions(+), 16 deletions(-) diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig index 6a3ea1aa296..c162724fed4 100644 --- a/arch/powerpc/configs/mpc85xx_defconfig +++ b/arch/powerpc/configs/mpc85xx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.30-rc2 -# Tue Apr 21 15:38:23 2009 +# Tue Apr 21 15:40:23 2009 # # CONFIG_PPC64 is not set @@ -189,9 +189,9 @@ CONFIG_MPC85xx_CDS=y CONFIG_MPC85xx_MDS=y CONFIG_MPC8536_DS=y CONFIG_MPC85xx_DS=y -# CONFIG_SOCRATES is not set +CONFIG_SOCRATES=y CONFIG_KSI8560=y -# CONFIG_STX_GP3 is not set +CONFIG_STX_GP3=y CONFIG_TQM8540=y CONFIG_TQM8541=y CONFIG_TQM8548=y @@ -212,11 +212,11 @@ CONFIG_PPC_I8259=y # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set CONFIG_QUICC_ENGINE=y -# CONFIG_QE_GPIO is not set +CONFIG_QE_GPIO=y CONFIG_CPM2=y CONFIG_FSL_ULI1575=y CONFIG_CPM=y -# CONFIG_MPC8xxx_GPIO is not set +CONFIG_MPC8xxx_GPIO=y # CONFIG_SIMPLE_GPIO is not set # @@ -661,11 +661,11 @@ CONFIG_PHYLIB=y # # MII PHY device drivers # -# CONFIG_MARVELL_PHY is not set -# CONFIG_DAVICOM_PHY is not set +CONFIG_MARVELL_PHY=y +CONFIG_DAVICOM_PHY=y # CONFIG_QSEMI_PHY is not set # CONFIG_LXT_PHY is not set -# CONFIG_CICADA_PHY is not set +CONFIG_CICADA_PHY=y CONFIG_VITESSE_PHY=y # CONFIG_SMSC_PHY is not set # CONFIG_BROADCOM_PHY is not set @@ -674,7 +674,7 @@ CONFIG_VITESSE_PHY=y # CONFIG_NATIONAL_PHY is not set # CONFIG_STE10XP is not set # CONFIG_LSI_ET1011C_PHY is not set -# CONFIG_FIXED_PHY is not set +CONFIG_FIXED_PHY=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y @@ -696,7 +696,10 @@ CONFIG_MII=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_ATL2 is not set -# CONFIG_FS_ENET is not set +CONFIG_FS_ENET=y +CONFIG_FS_ENET_HAS_SCC=y +CONFIG_FS_ENET_HAS_FCC=y +# CONFIG_FS_ENET_MDIO_FCC is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -717,7 +720,9 @@ CONFIG_NETDEV_1000=y # CONFIG_BNX2 is not set CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y -# CONFIG_UCC_GETH is not set +CONFIG_UCC_GETH=y +# CONFIG_UGETH_MAGIC_PACKET is not set +# CONFIG_UGETH_TX_ON_DEMAND is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -846,14 +851,15 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_CPM is not set # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set -# CONFIG_SERIAL_QE is not set +CONFIG_SERIAL_QE=m CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set -# CONFIG_HW_RANDOM is not set +CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set CONFIG_NVRAM=y # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -890,7 +896,7 @@ CONFIG_I2C_HELPER_AUTO=y # # I2C system bus drivers (mostly embedded / system-on-chip) # -# CONFIG_I2C_CPM is not set +CONFIG_I2C_CPM=m # CONFIG_I2C_GPIO is not set CONFIG_I2C_MPC=y # CONFIG_I2C_OCORES is not set @@ -1253,6 +1259,7 @@ CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_FHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set # CONFIG_USB_WHCI_HCD is not set @@ -1597,6 +1604,9 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=m # CONFIG_DLM is not set +CONFIG_UCC_SLOW=y +CONFIG_UCC_FAST=y +CONFIG_UCC=y # CONFIG_BINARY_PRINTF is not set # @@ -1719,6 +1729,7 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_BLKCIPHER2=y @@ -1732,7 +1743,7 @@ CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_NULL is not set CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_AUTHENC is not set +CONFIG_CRYPTO_AUTHENC=y # CONFIG_CRYPTO_TEST is not set # @@ -1808,7 +1819,7 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set -# CONFIG_CRYPTO_DEV_TALITOS is not set +CONFIG_CRYPTO_DEV_TALITOS=y CONFIG_PPC_CLOCK=y CONFIG_PPC_LIB_RHEAP=y # CONFIG_VIRTUALIZATION is not set -- cgit v1.2.3 From 3de0e075486cc1a175d63bb7167bfc66e9ac16f4 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Wed, 15 Apr 2009 16:33:08 -0500 Subject: powerpc/85xx: Added SMP defconfig Since the vast majority of 85xx platforms are UP we introduce a new SMP config for the few platforms that have more than one core. Beyond CONFIG_SMP=y and its dependencies this should be identical to mpc85xx_defconfig. Signed-off-by: Kumar Gala --- arch/powerpc/configs/mpc85xx_smp_defconfig | 1829 ++++++++++++++++++++++++++++ 1 file changed, 1829 insertions(+) create mode 100644 arch/powerpc/configs/mpc85xx_smp_defconfig diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig new file mode 100644 index 00000000000..1aa1c508d60 --- /dev/null +++ b/arch/powerpc/configs/mpc85xx_smp_defconfig @@ -0,0 +1,1829 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.30-rc2 +# Tue Apr 21 15:41:18 2009 +# +# CONFIG_PPC64 is not set + +# +# Processor support +# +# CONFIG_6xx is not set +CONFIG_PPC_85xx=y +# CONFIG_PPC_8xx is not set +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_E200 is not set +CONFIG_E500=y +# CONFIG_PPC_E500MC is not set +CONFIG_BOOKE=y +CONFIG_FSL_BOOKE=y +CONFIG_FSL_EMB_PERFMON=y +# CONFIG_PHYS_64BIT is not set +CONFIG_SPE=y +CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_BOOK3E_MMU=y +# CONFIG_PPC_MM_SLICES is not set +CONFIG_SMP=y +CONFIG_NR_CPUS=8 +CONFIG_PPC32=y +CONFIG_WORD_SIZE=32 +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set +CONFIG_MMU=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_ILOG2_U32=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_GPIO=y +# CONFIG_ARCH_NO_VIRT_TO_BUS is not set +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_OF=y +CONFIG_PPC_UDBG_16550=y +CONFIG_GENERIC_TBSYNC=y +CONFIG_AUDIT_ARCH=y +CONFIG_GENERIC_BUG=y +CONFIG_DEFAULT_UIMAGE=y +# CONFIG_PPC_DCR_NATIVE is not set +# CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +CONFIG_AUDIT=y +# CONFIG_AUDITSYSCALL is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_GROUP_SCHED=y +# CONFIG_FAIR_GROUP_SCHED is not set +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +CONFIG_KALLSYMS_EXTRA_PASS=y +# CONFIG_STRIP_ASM_SYMS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y +CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_USE_GENERIC_SMP_HELPERS=y +CONFIG_HAVE_CLK=y +# CONFIG_SLOW_WORK is not set +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_STOP_MACHINE=y +CONFIG_BLOCK=y +CONFIG_LBD=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_FREEZER is not set + +# +# Platform support +# +# CONFIG_PPC_CELL is not set +# CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PQ2ADS is not set +CONFIG_MPC85xx=y +CONFIG_MPC8540_ADS=y +CONFIG_MPC8560_ADS=y +CONFIG_MPC85xx_CDS=y +CONFIG_MPC85xx_MDS=y +CONFIG_MPC8536_DS=y +CONFIG_MPC85xx_DS=y +CONFIG_SOCRATES=y +CONFIG_KSI8560=y +CONFIG_STX_GP3=y +CONFIG_TQM8540=y +CONFIG_TQM8541=y +CONFIG_TQM8548=y +CONFIG_TQM8555=y +CONFIG_TQM8560=y +CONFIG_SBC8548=y +# CONFIG_SBC8560 is not set +CONFIG_TQM85xx=y +# CONFIG_IPIC is not set +CONFIG_MPIC=y +# CONFIG_MPIC_WEIRD is not set +CONFIG_PPC_I8259=y +# CONFIG_PPC_RTAS is not set +# CONFIG_MMIO_NVRAM is not set +# CONFIG_PPC_MPC106 is not set +# CONFIG_PPC_970_NAP is not set +# CONFIG_PPC_INDIRECT_IO is not set +# CONFIG_GENERIC_IOMAP is not set +# CONFIG_CPU_FREQ is not set +CONFIG_QUICC_ENGINE=y +CONFIG_QE_GPIO=y +CONFIG_CPM2=y +CONFIG_FSL_ULI1575=y +CONFIG_CPM=y +CONFIG_MPC8xxx_GPIO=y +# CONFIG_SIMPLE_GPIO is not set + +# +# Kernel options +# +CONFIG_HIGHMEM=y +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_SCHED_HRTICK=y +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set +CONFIG_BINFMT_MISC=m +CONFIG_MATH_EMULATION=y +# CONFIG_IOMMU_HELPER is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +# CONFIG_IRQ_ALL_CPUS is not set +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set +CONFIG_FORCE_MAX_ZONEORDER=11 +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" +# CONFIG_PM is not set +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_ZONE_DMA=y +CONFIG_GENERIC_ISA_DMA=y +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_FSL_SOC=y +CONFIG_FSL_PCI=y +CONFIG_PPC_PCI_CHOICE=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_SYSCALL=y +# CONFIG_PCIEPORTBUS is not set +CONFIG_ARCH_SUPPORTS_MSI=y +# CONFIG_PCI_MSI is not set +# CONFIG_PCI_LEGACY is not set +# CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set +# CONFIG_PCCARD is not set +# CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_LOWMEM_CAM_NUM=3 +CONFIG_PAGE_OFFSET=0xc0000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 +CONFIG_PHYSICAL_ALIGN=0x04000000 +CONFIG_TASK_SIZE=0xc0000000 +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=y +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +CONFIG_NET_KEY=m +# CONFIG_NET_KEY_MIGRATE is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_VERBOSE=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +CONFIG_NET_IPIP=y +CONFIG_NET_IPGRE=y +CONFIG_NET_IPGRE_BROADCAST=y +CONFIG_IP_MROUTE=y +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y +CONFIG_ARPD=y +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_TUNNEL=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +CONFIG_IPV6=y +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_IPV6_MIP6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +CONFIG_INET6_XFRM_MODE_TRANSPORT=y +CONFIG_INET6_XFRM_MODE_TUNNEL=y +CONFIG_INET6_XFRM_MODE_BEET=y +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=y +CONFIG_IPV6_NDISC_NODETYPE=y +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +CONFIG_IP_SCTP=m +# CONFIG_SCTP_DBG_MSG is not set +# CONFIG_SCTP_DBG_OBJCNT is not set +# CONFIG_SCTP_HMAC_NONE is not set +# CONFIG_SCTP_HMAC_SHA1 is not set +CONFIG_SCTP_HMAC_MD5=y +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +CONFIG_FIB_RULES=y +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +CONFIG_WIRELESS_OLD_REGULATORY=y +# CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set +# CONFIG_MAC80211 is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +# CONFIG_MTD is not set +CONFIG_OF_DEVICE=y +CONFIG_OF_GPIO=y +CONFIG_OF_I2C=y +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +CONFIG_BLK_DEV_NBD=y +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=131072 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set +CONFIG_MISC_DEVICES=y +# CONFIG_PHANTOM is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +CONFIG_EEPROM_LEGACY=y +# CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_ST=y +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=y +# CONFIG_BLK_DEV_SR_VENDOR is not set +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +CONFIG_SCSI_LOGGING=y +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_CXGB3_ISCSI is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ADVANSYS is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set +# CONFIG_FCOE is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_MVSAS is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y +CONFIG_SATA_AHCI=y +# CONFIG_SATA_SIL24 is not set +CONFIG_SATA_FSL=y +CONFIG_ATA_SFF=y +# CONFIG_SATA_SVW is not set +# CONFIG_ATA_PIIX is not set +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SX4 is not set +# CONFIG_SATA_SIL is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set +# CONFIG_SATA_INIC162X is not set +CONFIG_PATA_ALI=y +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_CMD640_PCI is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CS5520 is not set +# CONFIG_PATA_CS5530 is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_ATA_GENERIC is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_IT8213 is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_MARVELL is not set +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_NS87415 is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RZ1000 is not set +# CONFIG_PATA_SC1200 is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set +# CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_SCH is not set +# CONFIG_MD is not set +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# Enable only one of the two stacks, unless you know what you are doing +# +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set +# CONFIG_I2O is not set +# CONFIG_MACINTOSH_DRIVERS is not set +CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y +CONFIG_DUMMY=y +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_ARCNET is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +CONFIG_MARVELL_PHY=y +CONFIG_DAVICOM_PHY=y +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +CONFIG_CICADA_PHY=y +CONFIG_VITESSE_PHY=y +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +CONFIG_FIXED_PHY=y +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_NET_PCI is not set +# CONFIG_B44 is not set +# CONFIG_ATL2 is not set +CONFIG_FS_ENET=y +CONFIG_FS_ENET_HAS_SCC=y +CONFIG_FS_ENET_HAS_FCC=y +# CONFIG_FS_ENET_MDIO_FCC is not set +CONFIG_NETDEV_1000=y +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_E1000E is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set +# CONFIG_IGBVF is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +CONFIG_FSL_PQ_MDIO=y +CONFIG_GIANFAR=y +CONFIG_UCC_GETH=y +# CONFIG_UGETH_MAGIC_PACKET is not set +# CONFIG_UGETH_TX_ON_DEMAND is not set +# CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set +# CONFIG_JME is not set +CONFIG_NETDEV_10000=y +# CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y +# CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set +# CONFIG_IXGBE is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set +# CONFIG_VXGE is not set +# CONFIG_MYRI10GE is not set +# CONFIG_NETXEN_NIC is not set +# CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set +# CONFIG_MLX4_CORE is not set +# CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set +# CONFIG_QLGE is not set +# CONFIG_SFC is not set +# CONFIG_BE2NET is not set +# CONFIG_TR is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_I8042=y +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_SERIO_XILINX_XPS_PS2 is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y +CONFIG_SERIAL_8250_NR_UARTS=2 +CONFIG_SERIAL_8250_RUNTIME_UARTS=2 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_RSA=y + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_CPM is not set +# CONFIG_SERIAL_JSM is not set +# CONFIG_SERIAL_OF_PLATFORM is not set +CONFIG_SERIAL_QE=m +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +CONFIG_NVRAM=y +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +# CONFIG_I2C_CHARDEV is not set +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# PC SMBus host controller drivers +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_ISCH is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_CPM=m +# CONFIG_I2C_GPIO is not set +CONFIG_I2C_MPC=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Graphics adapter I2C/DDC channel drivers +# +# CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# +# CONFIG_GPIO_XILINX is not set + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# +# CONFIG_GPIO_BT8XX is not set + +# +# SPI GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_UCB1400_CORE is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_REGULATOR is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +CONFIG_DVB_CORE=m +CONFIG_VIDEO_MEDIA=m + +# +# Multimedia drivers +# +# CONFIG_MEDIA_ATTACH is not set +CONFIG_MEDIA_TUNER=m +# CONFIG_MEDIA_TUNER_CUSTOMISE is not set +CONFIG_MEDIA_TUNER_SIMPLE=m +CONFIG_MEDIA_TUNER_TDA8290=m +CONFIG_MEDIA_TUNER_TDA9887=m +CONFIG_MEDIA_TUNER_TEA5761=m +CONFIG_MEDIA_TUNER_TEA5767=m +CONFIG_MEDIA_TUNER_MT20XX=m +CONFIG_MEDIA_TUNER_XC2028=m +CONFIG_MEDIA_TUNER_XC5000=m +CONFIG_MEDIA_TUNER_MC44S803=m +# CONFIG_DVB_DYNAMIC_MINORS is not set +CONFIG_DVB_CAPTURE_DRIVERS=y + +# +# Supported SAA7146 based PCI Adapters +# +# CONFIG_TTPCI_EEPROM is not set +# CONFIG_DVB_BUDGET_CORE is not set + +# +# Supported USB Adapters +# +# CONFIG_DVB_USB is not set +# CONFIG_DVB_TTUSB_BUDGET is not set +# CONFIG_DVB_TTUSB_DEC is not set +# CONFIG_DVB_SIANO_SMS1XXX is not set + +# +# Supported FlexCopII (B2C2) Adapters +# +# CONFIG_DVB_B2C2_FLEXCOP is not set + +# +# Supported BT878 Adapters +# + +# +# Supported Pluto2 Adapters +# +# CONFIG_DVB_PLUTO2 is not set + +# +# Supported SDMC DM1105 Adapters +# +# CONFIG_DVB_DM1105 is not set + +# +# Supported DVB Frontends +# +# CONFIG_DVB_FE_CUSTOMISE is not set +CONFIG_DAB=y +# CONFIG_USB_DABUSB is not set + +# +# Graphics support +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=y +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +CONFIG_VGA_CONSOLE=y +# CONFIG_VGACON_SOFT_SCROLLBACK is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_SOUND=y +CONFIG_SOUND_OSS_CORE=y +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +# CONFIG_SND_SEQUENCER is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_HRTIMER is not set +# CONFIG_SND_DYNAMIC_MINORS is not set +# CONFIG_SND_SUPPORT_OLD_API is not set +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +CONFIG_SND_VMASTER=y +CONFIG_SND_AC97_CODEC=y +CONFIG_SND_DRIVERS=y +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set +# CONFIG_SND_AC97_POWER_SAVE is not set +CONFIG_SND_PCI=y +# CONFIG_SND_AD1889 is not set +# CONFIG_SND_ALS300 is not set +# CONFIG_SND_ALS4000 is not set +# CONFIG_SND_ALI5451 is not set +# CONFIG_SND_ATIIXP is not set +# CONFIG_SND_ATIIXP_MODEM is not set +# CONFIG_SND_AU8810 is not set +# CONFIG_SND_AU8820 is not set +# CONFIG_SND_AU8830 is not set +# CONFIG_SND_AW2 is not set +# CONFIG_SND_AZT3328 is not set +# CONFIG_SND_BT87X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_CMIPCI is not set +# CONFIG_SND_OXYGEN is not set +# CONFIG_SND_CS4281 is not set +# CONFIG_SND_CS46XX is not set +# CONFIG_SND_CS5530 is not set +# CONFIG_SND_DARLA20 is not set +# CONFIG_SND_GINA20 is not set +# CONFIG_SND_LAYLA20 is not set +# CONFIG_SND_DARLA24 is not set +# CONFIG_SND_GINA24 is not set +# CONFIG_SND_LAYLA24 is not set +# CONFIG_SND_MONA is not set +# CONFIG_SND_MIA is not set +# CONFIG_SND_ECHO3G is not set +# CONFIG_SND_INDIGO is not set +# CONFIG_SND_INDIGOIO is not set +# CONFIG_SND_INDIGODJ is not set +# CONFIG_SND_INDIGOIOX is not set +# CONFIG_SND_INDIGODJX is not set +# CONFIG_SND_EMU10K1 is not set +# CONFIG_SND_EMU10K1X is not set +# CONFIG_SND_ENS1370 is not set +# CONFIG_SND_ENS1371 is not set +# CONFIG_SND_ES1938 is not set +# CONFIG_SND_ES1968 is not set +# CONFIG_SND_FM801 is not set +# CONFIG_SND_HDA_INTEL is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set +# CONFIG_SND_HIFIER is not set +# CONFIG_SND_ICE1712 is not set +# CONFIG_SND_ICE1724 is not set +CONFIG_SND_INTEL8X0=y +# CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_PCXHR is not set +# CONFIG_SND_RIPTIDE is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set +# CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_TRIDENT is not set +# CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VIRTUOSO is not set +# CONFIG_SND_VX222 is not set +# CONFIG_SND_YMFPCI is not set +CONFIG_SND_PPC=y +CONFIG_SND_USB=y +# CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_USX2Y is not set +# CONFIG_SND_USB_CAIAQ is not set +# CONFIG_SND_SOC is not set +# CONFIG_SOUND_PRIME is not set +CONFIG_AC97_BUS=y +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_HID_PID is not set +# CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +# CONFIG_DRAGONRISE_FF is not set +CONFIG_HID_EZKEY=y +# CONFIG_HID_KYE is not set +CONFIG_HID_GYRATION=y +# CONFIG_HID_KENSINGTON is not set +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +# CONFIG_HID_NTRIG is not set +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_TOPSEED is not set +CONFIG_THRUSTMASTER_FF=m +CONFIG_ZEROPLUS_FF=m +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_ROOT_HUB_TT=y +# CONFIG_USB_EHCI_TT_NEWSCHED is not set +CONFIG_USB_EHCI_FSL=y +CONFIG_USB_EHCI_HCD_PPC_OF=y +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_HCD_PPC_OF=y +CONFIG_USB_OHCI_HCD_PPC_OF_BE=y +CONFIG_USB_OHCI_HCD_PPC_OF_LE=y +CONFIG_USB_OHCI_HCD_PCI=y +CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y +CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_FHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +# CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +# CONFIG_UWB is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_INFINIBAND is not set +CONFIG_EDAC=y + +# +# Reporting subsystems +# +# CONFIG_EDAC_DEBUG is not set +CONFIG_EDAC_MM_EDAC=y +CONFIG_EDAC_MPC85XX=y +# CONFIG_EDAC_AMD8131 is not set +# CONFIG_EDAC_AMD8111 is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +CONFIG_RTC_DRV_CMOS=y +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_RTC_DRV_GENERIC is not set +CONFIG_DMADEVICES=y + +# +# DMA Devices +# +CONFIG_FSL_DMA=y +CONFIG_DMA_ENGINE=y + +# +# DMA Clients +# +# CONFIG_NET_DMA is not set +# CONFIG_ASYNC_TX_DMA is not set +# CONFIG_DMATEST is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +CONFIG_NTFS_FS=y +# CONFIG_NTFS_DEBUG is not set +# CONFIG_NTFS_RW is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +CONFIG_ADFS_FS=m +# CONFIG_ADFS_FS_RW is not set +CONFIG_AFFS_FS=m +CONFIG_HFS_FS=m +CONFIG_HFSPLUS_FS=m +CONFIG_BEFS_FS=m +# CONFIG_BEFS_DEBUG is not set +CONFIG_BFS_FS=m +CONFIG_EFS_FS=m +CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set +CONFIG_VXFS_FS=m +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +CONFIG_HPFS_FS=m +CONFIG_QNX4FS_FS=m +# CONFIG_ROMFS_FS is not set +CONFIG_SYSV_FS=m +CONFIG_UFS_FS=m +# CONFIG_UFS_FS_WRITE is not set +# CONFIG_UFS_DEBUG is not set +# CONFIG_NILFS2_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y +CONFIG_NFSD=y +# CONFIG_NFSD_V3 is not set +# CONFIG_NFSD_V4 is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +CONFIG_MAC_PARTITION=y +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=m +# CONFIG_DLM is not set +CONFIG_UCC_SLOW=y +CONFIG_UCC_FAST=y +CONFIG_UCC=y +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=y +CONFIG_CRC_ITU_T=m +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_HIGHMEM is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_PRINT_STACK_DEPTH=64 +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set +# CONFIG_XMON is not set +# CONFIG_IRQSTACKS is not set +CONFIG_VIRQ_DEBUG=y +# CONFIG_BDI_SWITCH is not set +# CONFIG_PPC_EARLY_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_AUTHENC=y +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=m +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +CONFIG_CRYPTO_SHA1=m +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set +CONFIG_CRYPTO_DEV_TALITOS=y +CONFIG_PPC_CLOCK=y +CONFIG_PPC_LIB_RHEAP=y +# CONFIG_VIRTUALIZATION is not set -- cgit v1.2.3 From 0658c16056660886ea2f35c4f038be70a94b1532 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Wed, 15 Apr 2009 16:48:50 -0500 Subject: powerpc/85xx: Remove defconfigs that mpc85xx_{smp_}defconfig cover Signed-off-by: Kumar Gala --- arch/powerpc/configs/85xx/mpc8536_ds_defconfig | 1802 ------------------------ arch/powerpc/configs/85xx/mpc8544_ds_defconfig | 1802 ------------------------ arch/powerpc/configs/85xx/mpc8568mds_defconfig | 1309 ----------------- arch/powerpc/configs/85xx/mpc8572_ds_defconfig | 1794 ----------------------- 4 files changed, 6707 deletions(-) delete mode 100644 arch/powerpc/configs/85xx/mpc8536_ds_defconfig delete mode 100644 arch/powerpc/configs/85xx/mpc8544_ds_defconfig delete mode 100644 arch/powerpc/configs/85xx/mpc8568mds_defconfig delete mode 100644 arch/powerpc/configs/85xx/mpc8572_ds_defconfig diff --git a/arch/powerpc/configs/85xx/mpc8536_ds_defconfig b/arch/powerpc/configs/85xx/mpc8536_ds_defconfig deleted file mode 100644 index e31b6a4732e..00000000000 --- a/arch/powerpc/configs/85xx/mpc8536_ds_defconfig +++ /dev/null @@ -1,1802 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:36:04 2009 -# -# CONFIG_PPC64 is not set - -# -# Processor support -# -# CONFIG_6xx is not set -CONFIG_PPC_85xx=y -# CONFIG_PPC_8xx is not set -# CONFIG_40x is not set -# CONFIG_44x is not set -# CONFIG_E200 is not set -CONFIG_E500=y -# CONFIG_PPC_E500MC is not set -CONFIG_BOOKE=y -CONFIG_FSL_BOOKE=y -CONFIG_FSL_EMB_PERFMON=y -# CONFIG_PHYS_64BIT is not set -CONFIG_SPE=y -CONFIG_PPC_MMU_NOHASH=y -# CONFIG_PPC_MM_SLICES is not set -# CONFIG_SMP is not set -CONFIG_PPC32=y -CONFIG_WORD_SIZE=32 -# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set -CONFIG_MMU=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_GENERIC_TIME=y -CONFIG_GENERIC_TIME_VSYSCALL=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_HARDIRQS=y -# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set -CONFIG_IRQ_PER_CPU=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_HAVE_LATENCYTOP_SUPPORT=y -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_ARCH_HAS_ILOG2_U32=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_FIND_NEXT_BIT=y -# CONFIG_ARCH_NO_VIRT_TO_BUS is not set -CONFIG_PPC=y -CONFIG_EARLY_PRINTK=y -CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_OMIT_FRAME_POINTER=y -CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_PPC_OF=y -CONFIG_OF=y -CONFIG_PPC_UDBG_16550=y -# CONFIG_GENERIC_TBSYNC is not set -CONFIG_AUDIT_ARCH=y -CONFIG_GENERIC_BUG=y -CONFIG_DEFAULT_UIMAGE=y -# CONFIG_PPC_DCR_NATIVE is not set -# CONFIG_PPC_DCR_MMIO is not set -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# General setup -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -CONFIG_POSIX_MQUEUE=y -CONFIG_BSD_PROCESS_ACCT=y -# CONFIG_BSD_PROCESS_ACCT_V3 is not set -# CONFIG_TASKSTATS is not set -CONFIG_AUDIT=y -# CONFIG_AUDITSYSCALL is not set -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_GROUP_SCHED=y -# CONFIG_FAIR_GROUP_SCHED is not set -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set -# CONFIG_CGROUPS is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y -# CONFIG_RELAY is not set -# CONFIG_NAMESPACES is not set -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_KALLSYMS=y -CONFIG_KALLSYMS_ALL=y -CONFIG_KALLSYMS_STRIP_GENERATED=y -CONFIG_KALLSYMS_EXTRA_PASS=y -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_ANON_INODES=y -CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -CONFIG_AIO=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_PCI_QUIRKS=y -CONFIG_SLUB_DEBUG=y -# CONFIG_SLAB is not set -CONFIG_SLUB=y -# CONFIG_SLOB is not set -# CONFIG_PROFILING is not set -CONFIG_HAVE_OPROFILE=y -# CONFIG_KPROBES is not set -CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y -CONFIG_HAVE_IOREMAP_PROT=y -CONFIG_HAVE_KPROBES=y -CONFIG_HAVE_KRETPROBES=y -CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set -CONFIG_SLABINFO=y -CONFIG_RT_MUTEXES=y -CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -# CONFIG_MODULE_FORCE_LOAD is not set -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MODVERSIONS=y -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_BLOCK=y -CONFIG_LBD=y -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_BLK_DEV_INTEGRITY is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set -# CONFIG_DEFAULT_DEADLINE is not set -CONFIG_DEFAULT_CFQ=y -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set -# CONFIG_FREEZER is not set - -# -# Platform support -# -# CONFIG_PPC_CELL is not set -# CONFIG_PPC_CELL_NATIVE is not set -# CONFIG_PQ2ADS is not set -CONFIG_MPC85xx=y -# CONFIG_MPC8540_ADS is not set -# CONFIG_MPC8560_ADS is not set -# CONFIG_MPC85xx_CDS is not set -# CONFIG_MPC85xx_MDS is not set -CONFIG_MPC8536_DS=y -# CONFIG_MPC85xx_DS is not set -# CONFIG_KSI8560 is not set -# CONFIG_STX_GP3 is not set -# CONFIG_TQM8540 is not set -# CONFIG_TQM8541 is not set -# CONFIG_TQM8548 is not set -# CONFIG_TQM8555 is not set -# CONFIG_TQM8560 is not set -# CONFIG_SBC8548 is not set -# CONFIG_SBC8560 is not set -# CONFIG_IPIC is not set -CONFIG_MPIC=y -# CONFIG_MPIC_WEIRD is not set -# CONFIG_PPC_I8259 is not set -# CONFIG_PPC_RTAS is not set -# CONFIG_MMIO_NVRAM is not set -# CONFIG_PPC_MPC106 is not set -# CONFIG_PPC_970_NAP is not set -# CONFIG_PPC_INDIRECT_IO is not set -# CONFIG_GENERIC_IOMAP is not set -# CONFIG_CPU_FREQ is not set -# CONFIG_QUICC_ENGINE is not set -# CONFIG_CPM2 is not set -# CONFIG_FSL_ULI1575 is not set -# CONFIG_MPC8xxx_GPIO is not set -# CONFIG_SIMPLE_GPIO is not set - -# -# Kernel options -# -CONFIG_HIGHMEM=y -CONFIG_TICK_ONESHOT=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_300 is not set -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_SCHED_HRTICK=y -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -CONFIG_BINFMT_ELF=y -# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set -# CONFIG_HAVE_AOUT is not set -CONFIG_BINFMT_MISC=m -CONFIG_MATH_EMULATION=y -# CONFIG_IOMMU_HELPER is not set -CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y -CONFIG_ARCH_HAS_WALK_MEMORY=y -CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_ARCH_POPULATES_NODE_MAP=y -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_SPLIT_PTLOCK_CPUS=4 -CONFIG_MIGRATION=y -# CONFIG_PHYS_ADDR_T_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y -CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y -CONFIG_PPC_4K_PAGES=y -# CONFIG_PPC_16K_PAGES is not set -# CONFIG_PPC_64K_PAGES is not set -CONFIG_FORCE_MAX_ZONEORDER=11 -CONFIG_PROC_DEVICETREE=y -# CONFIG_CMDLINE_BOOL is not set -CONFIG_EXTRA_TARGETS="" -# CONFIG_PM is not set -CONFIG_SECCOMP=y -CONFIG_ISA_DMA_API=y - -# -# Bus options -# -CONFIG_ZONE_DMA=y -CONFIG_PPC_INDIRECT_PCI=y -CONFIG_FSL_SOC=y -CONFIG_FSL_PCI=y -CONFIG_PPC_PCI_CHOICE=y -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_SYSCALL=y -# CONFIG_PCIEPORTBUS is not set -CONFIG_ARCH_SUPPORTS_MSI=y -# CONFIG_PCI_MSI is not set -# CONFIG_PCI_LEGACY is not set -# CONFIG_PCI_DEBUG is not set -# CONFIG_PCI_STUB is not set -# CONFIG_PCCARD is not set -# CONFIG_HOTPLUG_PCI is not set -# CONFIG_HAS_RAPIDIO is not set - -# -# Advanced setup -# -# CONFIG_ADVANCED_OPTIONS is not set - -# -# Default settings for advanced configuration options are used -# -CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_PAGE_OFFSET=0xc0000000 -CONFIG_KERNEL_START=0xc0000000 -CONFIG_PHYSICAL_START=0x00000000 -CONFIG_PHYSICAL_ALIGN=0x10000000 -CONFIG_TASK_SIZE=0xc0000000 -CONFIG_NET=y - -# -# Networking options -# -CONFIG_COMPAT_NET_DEV_OPS=y -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -CONFIG_XFRM=y -CONFIG_XFRM_USER=y -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set -# CONFIG_XFRM_STATISTICS is not set -CONFIG_NET_KEY=m -# CONFIG_NET_KEY_MIGRATE is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_ADVANCED_ROUTER=y -CONFIG_ASK_IP_FIB_HASH=y -# CONFIG_IP_FIB_TRIE is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_MULTIPLE_TABLES=y -CONFIG_IP_ROUTE_MULTIPATH=y -CONFIG_IP_ROUTE_VERBOSE=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -CONFIG_NET_IPIP=y -CONFIG_NET_IPGRE=y -CONFIG_NET_IPGRE_BROADCAST=y -CONFIG_IP_MROUTE=y -CONFIG_IP_PIMSM_V1=y -CONFIG_IP_PIMSM_V2=y -CONFIG_ARPD=y -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -CONFIG_INET_TUNNEL=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -CONFIG_IPV6=y -# CONFIG_IPV6_PRIVACY is not set -# CONFIG_IPV6_ROUTER_PREF is not set -# CONFIG_IPV6_OPTIMISTIC_DAD is not set -# CONFIG_INET6_AH is not set -# CONFIG_INET6_ESP is not set -# CONFIG_INET6_IPCOMP is not set -# CONFIG_IPV6_MIP6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set -CONFIG_INET6_XFRM_MODE_TRANSPORT=y -CONFIG_INET6_XFRM_MODE_TUNNEL=y -CONFIG_INET6_XFRM_MODE_BEET=y -# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set -CONFIG_IPV6_SIT=y -CONFIG_IPV6_NDISC_NODETYPE=y -# CONFIG_IPV6_TUNNEL is not set -# CONFIG_IPV6_MULTIPLE_TABLES is not set -# CONFIG_IPV6_MROUTE is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set -# CONFIG_IP_DCCP is not set -CONFIG_IP_SCTP=m -# CONFIG_SCTP_DBG_MSG is not set -# CONFIG_SCTP_DBG_OBJCNT is not set -# CONFIG_SCTP_HMAC_NONE is not set -# CONFIG_SCTP_HMAC_SHA1 is not set -CONFIG_SCTP_HMAC_MD5=y -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_NET_DSA is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set -# CONFIG_DCB is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_CAN is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set -CONFIG_FIB_RULES=y -CONFIG_WIRELESS=y -# CONFIG_CFG80211 is not set -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set -# CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set -# CONFIG_WIMAX is not set -# CONFIG_RFKILL is not set -# CONFIG_NET_9P is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=y -CONFIG_FIRMWARE_IN_KERNEL=y -CONFIG_EXTRA_FIRMWARE="" -# CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set -# CONFIG_SYS_HYPERVISOR is not set -# CONFIG_CONNECTOR is not set -# CONFIG_MTD is not set -CONFIG_OF_DEVICE=y -CONFIG_OF_I2C=y -# CONFIG_PARPORT is not set -CONFIG_BLK_DEV=y -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -CONFIG_BLK_DEV_NBD=y -# CONFIG_BLK_DEV_SX8 is not set -# CONFIG_BLK_DEV_UB is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=524288 -# CONFIG_BLK_DEV_XIP is not set -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set -# CONFIG_BLK_DEV_HD is not set -CONFIG_MISC_DEVICES=y -# CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set -# CONFIG_SGI_IOC4 is not set -# CONFIG_TIFM_CORE is not set -# CONFIG_ICS932S401 is not set -# CONFIG_ENCLOSURE_SERVICES is not set -# CONFIG_HP_ILO is not set -# CONFIG_C2PORT is not set -CONFIG_HAVE_IDE=y -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=y -CONFIG_SCSI_DMA=y -# CONFIG_SCSI_TGT is not set -# CONFIG_SCSI_NETLINK is not set -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_ST=y -# CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=y -# CONFIG_BLK_DEV_SR_VENDOR is not set -CONFIG_CHR_DEV_SG=y -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_CONSTANTS is not set -CONFIG_SCSI_LOGGING=y -# CONFIG_SCSI_SCAN_ASYNC is not set -CONFIG_SCSI_WAIT_SCAN=m - -# -# SCSI Transports -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_LIBSAS is not set -# CONFIG_SCSI_SRP_ATTRS is not set -CONFIG_SCSI_LOWLEVEL=y -# CONFIG_ISCSI_TCP is not set -# CONFIG_SCSI_CXGB3_ISCSI is not set -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_SCSI_AIC94XX is not set -# CONFIG_SCSI_DPT_I2O is not set -# CONFIG_SCSI_ADVANSYS is not set -# CONFIG_SCSI_ARCMSR is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_HPTIOP is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_LIBFC is not set -# CONFIG_FCOE is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set -# CONFIG_SCSI_STEX is not set -# CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -# CONFIG_SCSI_QLA_FC is not set -# CONFIG_SCSI_QLA_ISCSI is not set -# CONFIG_SCSI_LPFC is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_SRP is not set -# CONFIG_SCSI_DH is not set -CONFIG_ATA=y -# CONFIG_ATA_NONSTANDARD is not set -CONFIG_SATA_PMP=y -# CONFIG_SATA_AHCI is not set -CONFIG_SATA_SIL24=y -CONFIG_SATA_FSL=y -CONFIG_ATA_SFF=y -# CONFIG_SATA_SVW is not set -# CONFIG_ATA_PIIX is not set -# CONFIG_SATA_MV is not set -# CONFIG_SATA_NV is not set -# CONFIG_PDC_ADMA is not set -# CONFIG_SATA_QSTOR is not set -# CONFIG_SATA_PROMISE is not set -# CONFIG_SATA_SX4 is not set -CONFIG_SATA_SIL=y -# CONFIG_SATA_SIS is not set -# CONFIG_SATA_ULI is not set -# CONFIG_SATA_VIA is not set -# CONFIG_SATA_VITESSE is not set -# CONFIG_SATA_INIC162X is not set -# CONFIG_PATA_ALI is not set -# CONFIG_PATA_AMD is not set -# CONFIG_PATA_ARTOP is not set -# CONFIG_PATA_ATIIXP is not set -# CONFIG_PATA_CMD640_PCI is not set -# CONFIG_PATA_CMD64X is not set -# CONFIG_PATA_CS5520 is not set -# CONFIG_PATA_CS5530 is not set -# CONFIG_PATA_CYPRESS is not set -# CONFIG_PATA_EFAR is not set -# CONFIG_ATA_GENERIC is not set -# CONFIG_PATA_HPT366 is not set -# CONFIG_PATA_HPT37X is not set -# CONFIG_PATA_HPT3X2N is not set -# CONFIG_PATA_HPT3X3 is not set -# CONFIG_PATA_IT821X is not set -# CONFIG_PATA_IT8213 is not set -# CONFIG_PATA_JMICRON is not set -# CONFIG_PATA_TRIFLEX is not set -# CONFIG_PATA_MARVELL is not set -# CONFIG_PATA_MPIIX is not set -# CONFIG_PATA_OLDPIIX is not set -# CONFIG_PATA_NETCELL is not set -# CONFIG_PATA_NINJA32 is not set -# CONFIG_PATA_NS87410 is not set -# CONFIG_PATA_NS87415 is not set -# CONFIG_PATA_OPTI is not set -# CONFIG_PATA_OPTIDMA is not set -# CONFIG_PATA_PDC_OLD is not set -# CONFIG_PATA_RADISYS is not set -# CONFIG_PATA_RZ1000 is not set -# CONFIG_PATA_SC1200 is not set -# CONFIG_PATA_SERVERWORKS is not set -# CONFIG_PATA_PDC2027X is not set -# CONFIG_PATA_SIL680 is not set -# CONFIG_PATA_SIS is not set -# CONFIG_PATA_VIA is not set -# CONFIG_PATA_WINBOND is not set -# CONFIG_PATA_PLATFORM is not set -# CONFIG_PATA_SCH is not set -# CONFIG_MD is not set -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# Enable only one of the two stacks, unless you know what you are doing -# -# CONFIG_FIREWIRE is not set -# CONFIG_IEEE1394 is not set -# CONFIG_I2O is not set -# CONFIG_MACINTOSH_DRIVERS is not set -CONFIG_NETDEVICES=y -CONFIG_DUMMY=y -# CONFIG_BONDING is not set -# CONFIG_MACVLAN is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_VETH is not set -# CONFIG_ARCNET is not set -CONFIG_PHYLIB=y - -# -# MII PHY device drivers -# -# CONFIG_MARVELL_PHY is not set -# CONFIG_DAVICOM_PHY is not set -# CONFIG_QSEMI_PHY is not set -# CONFIG_LXT_PHY is not set -# CONFIG_CICADA_PHY is not set -CONFIG_VITESSE_PHY=y -# CONFIG_SMSC_PHY is not set -# CONFIG_BROADCOM_PHY is not set -# CONFIG_ICPLUS_PHY is not set -# CONFIG_REALTEK_PHY is not set -# CONFIG_NATIONAL_PHY is not set -# CONFIG_STE10XP is not set -# CONFIG_LSI_ET1011C_PHY is not set -# CONFIG_FIXED_PHY is not set -# CONFIG_MDIO_BITBANG is not set -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -# CONFIG_NET_VENDOR_3COM is not set -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -# CONFIG_IBM_NEW_EMAC_ZMII is not set -# CONFIG_IBM_NEW_EMAC_RGMII is not set -# CONFIG_IBM_NEW_EMAC_TAH is not set -# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set -# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set -# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set -# CONFIG_NET_PCI is not set -# CONFIG_B44 is not set -# CONFIG_ATL2 is not set -CONFIG_NETDEV_1000=y -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_E1000E is not set -# CONFIG_IP1000 is not set -# CONFIG_IGB is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -CONFIG_SKGE=y -# CONFIG_SKGE_DEBUG is not set -CONFIG_SKY2=y -# CONFIG_SKY2_DEBUG is not set -# CONFIG_VIA_VELOCITY is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set -CONFIG_GIANFAR=y -# CONFIG_QLA3XXX is not set -# CONFIG_ATL1 is not set -# CONFIG_ATL1E is not set -# CONFIG_JME is not set -CONFIG_NETDEV_10000=y -# CONFIG_CHELSIO_T1 is not set -CONFIG_CHELSIO_T3_DEPENDS=y -# CONFIG_CHELSIO_T3 is not set -# CONFIG_ENIC is not set -# CONFIG_IXGBE is not set -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set -# CONFIG_MYRI10GE is not set -# CONFIG_NETXEN_NIC is not set -# CONFIG_NIU is not set -# CONFIG_MLX4_EN is not set -# CONFIG_MLX4_CORE is not set -# CONFIG_TEHUTI is not set -# CONFIG_BNX2X is not set -# CONFIG_QLGE is not set -# CONFIG_SFC is not set -# CONFIG_TR is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set - -# -# Enable WiMAX (Networking options) to see the WiMAX drivers -# - -# -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET is not set -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_NET_FC is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_ISDN is not set -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y -CONFIG_INPUT_FF_MEMLESS=m -# CONFIG_INPUT_POLLDEV is not set - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -CONFIG_SERIO_I8042=y -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_PCIPS2 is not set -CONFIG_SERIO_LIBPS2=y -# CONFIG_SERIO_RAW is not set -# CONFIG_SERIO_XILINX_XPS_PS2 is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_CONSOLE_TRANSLATIONS=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_VT_HW_CONSOLE_BINDING is not set -CONFIG_DEVKMEM=y -# CONFIG_SERIAL_NONSTANDARD is not set -# CONFIG_NOZOMI is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_PCI=y -CONFIG_SERIAL_8250_NR_UARTS=2 -CONFIG_SERIAL_8250_RUNTIME_UARTS=2 -CONFIG_SERIAL_8250_EXTENDED=y -CONFIG_SERIAL_8250_MANY_PORTS=y -CONFIG_SERIAL_8250_SHARE_IRQ=y -CONFIG_SERIAL_8250_DETECT_IRQ=y -CONFIG_SERIAL_8250_RSA=y - -# -# Non-8250 serial port support -# -# CONFIG_SERIAL_UARTLITE is not set -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set -# CONFIG_SERIAL_OF_PLATFORM is not set -CONFIG_UNIX98_PTYS=y -# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_HVC_UDBG is not set -# CONFIG_IPMI_HANDLER is not set -CONFIG_HW_RANDOM=y -# CONFIG_NVRAM is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_TCG_TPM is not set -CONFIG_DEVPORT=y -CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y -# CONFIG_I2C_CHARDEV is not set -CONFIG_I2C_HELPER_AUTO=y - -# -# I2C Hardware Bus support -# - -# -# PC SMBus host controller drivers -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_ISCH is not set -# CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set - -# -# I2C system bus drivers (mostly embedded / system-on-chip) -# -CONFIG_I2C_MPC=y -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_SIMTEC is not set - -# -# External I2C/SMBus adapter drivers -# -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_TINY_USB is not set - -# -# Graphics adapter I2C/DDC channel drivers -# -# CONFIG_I2C_VOODOO3 is not set - -# -# Other I2C/SMBus bus drivers -# -# CONFIG_I2C_PCA_PLATFORM is not set -# CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -CONFIG_EEPROM_LEGACY=y -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_SENSORS_TSL2550 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set -# CONFIG_SPI is not set -CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y -# CONFIG_GPIOLIB is not set -# CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set -# CONFIG_HWMON is not set -CONFIG_THERMAL=y -# CONFIG_WATCHDOG is not set -CONFIG_SSB_POSSIBLE=y - -# -# Sonics Silicon Backplane -# -# CONFIG_SSB is not set - -# -# Multifunction device drivers -# -# CONFIG_MFD_CORE is not set -# CONFIG_MFD_SM501 is not set -# CONFIG_HTC_PASIC3 is not set -# CONFIG_TWL4030_CORE is not set -# CONFIG_MFD_TMIO is not set -# CONFIG_PMIC_DA903X is not set -# CONFIG_MFD_WM8400 is not set -# CONFIG_MFD_WM8350_I2C is not set -# CONFIG_MFD_PCF50633 is not set -# CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -CONFIG_DVB_CORE=m -CONFIG_VIDEO_MEDIA=m - -# -# Multimedia drivers -# -# CONFIG_MEDIA_ATTACH is not set -CONFIG_MEDIA_TUNER=m -# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set -CONFIG_MEDIA_TUNER_SIMPLE=m -CONFIG_MEDIA_TUNER_TDA8290=m -CONFIG_MEDIA_TUNER_TDA9887=m -CONFIG_MEDIA_TUNER_TEA5761=m -CONFIG_MEDIA_TUNER_TEA5767=m -CONFIG_MEDIA_TUNER_MT20XX=m -CONFIG_MEDIA_TUNER_XC2028=m -CONFIG_MEDIA_TUNER_XC5000=m -# CONFIG_DVB_DYNAMIC_MINORS is not set -CONFIG_DVB_CAPTURE_DRIVERS=y - -# -# Supported SAA7146 based PCI Adapters -# -# CONFIG_TTPCI_EEPROM is not set -# CONFIG_DVB_BUDGET_CORE is not set - -# -# Supported USB Adapters -# -# CONFIG_DVB_USB is not set -# CONFIG_DVB_TTUSB_BUDGET is not set -# CONFIG_DVB_TTUSB_DEC is not set -# CONFIG_DVB_SIANO_SMS1XXX is not set - -# -# Supported FlexCopII (B2C2) Adapters -# -# CONFIG_DVB_B2C2_FLEXCOP is not set - -# -# Supported BT878 Adapters -# - -# -# Supported Pluto2 Adapters -# -# CONFIG_DVB_PLUTO2 is not set - -# -# Supported SDMC DM1105 Adapters -# -# CONFIG_DVB_DM1105 is not set - -# -# Supported DVB Frontends -# - -# -# Customise DVB Frontends -# -# CONFIG_DVB_FE_CUSTOMISE is not set - -# -# Multistandard (satellite) frontends -# -# CONFIG_DVB_STB0899 is not set -# CONFIG_DVB_STB6100 is not set - -# -# DVB-S (satellite) frontends -# -# CONFIG_DVB_CX24110 is not set -# CONFIG_DVB_CX24123 is not set -# CONFIG_DVB_MT312 is not set -# CONFIG_DVB_S5H1420 is not set -# CONFIG_DVB_STV0288 is not set -# CONFIG_DVB_STB6000 is not set -# CONFIG_DVB_STV0299 is not set -# CONFIG_DVB_TDA8083 is not set -# CONFIG_DVB_TDA10086 is not set -# CONFIG_DVB_TDA8261 is not set -# CONFIG_DVB_VES1X93 is not set -# CONFIG_DVB_TUNER_ITD1000 is not set -# CONFIG_DVB_TUNER_CX24113 is not set -# CONFIG_DVB_TDA826X is not set -# CONFIG_DVB_TUA6100 is not set -# CONFIG_DVB_CX24116 is not set -# CONFIG_DVB_SI21XX is not set - -# -# DVB-T (terrestrial) frontends -# -# CONFIG_DVB_SP8870 is not set -# CONFIG_DVB_SP887X is not set -# CONFIG_DVB_CX22700 is not set -# CONFIG_DVB_CX22702 is not set -# CONFIG_DVB_DRX397XD is not set -# CONFIG_DVB_L64781 is not set -# CONFIG_DVB_TDA1004X is not set -# CONFIG_DVB_NXT6000 is not set -# CONFIG_DVB_MT352 is not set -# CONFIG_DVB_ZL10353 is not set -# CONFIG_DVB_DIB3000MB is not set -# CONFIG_DVB_DIB3000MC is not set -# CONFIG_DVB_DIB7000M is not set -# CONFIG_DVB_DIB7000P is not set -# CONFIG_DVB_TDA10048 is not set - -# -# DVB-C (cable) frontends -# -# CONFIG_DVB_VES1820 is not set -# CONFIG_DVB_TDA10021 is not set -# CONFIG_DVB_TDA10023 is not set -# CONFIG_DVB_STV0297 is not set - -# -# ATSC (North American/Korean Terrestrial/Cable DTV) frontends -# -# CONFIG_DVB_NXT200X is not set -# CONFIG_DVB_OR51211 is not set -# CONFIG_DVB_OR51132 is not set -# CONFIG_DVB_BCM3510 is not set -# CONFIG_DVB_LGDT330X is not set -# CONFIG_DVB_LGDT3304 is not set -# CONFIG_DVB_S5H1409 is not set -# CONFIG_DVB_AU8522 is not set -# CONFIG_DVB_S5H1411 is not set - -# -# ISDB-T (terrestrial) frontends -# -# CONFIG_DVB_S921 is not set - -# -# Digital terrestrial only tuners/PLL -# -# CONFIG_DVB_PLL is not set -# CONFIG_DVB_TUNER_DIB0070 is not set - -# -# SEC control devices for DVB-S -# -# CONFIG_DVB_LNBP21 is not set -# CONFIG_DVB_ISL6405 is not set -# CONFIG_DVB_ISL6421 is not set -# CONFIG_DVB_LGS8GL5 is not set - -# -# Tools to develop new frontends -# -# CONFIG_DVB_DUMMY_FE is not set -# CONFIG_DVB_AF9013 is not set -CONFIG_DAB=y -# CONFIG_USB_DABUSB is not set - -# -# Graphics support -# -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_VGASTATE is not set -CONFIG_VIDEO_OUTPUT_CONTROL=y -# CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set - -# -# Console display driver support -# -CONFIG_VGA_CONSOLE=y -# CONFIG_VGACON_SOFT_SCROLLBACK is not set -CONFIG_DUMMY_CONSOLE=y -CONFIG_SOUND=y -# CONFIG_SOUND_OSS_CORE is not set -CONFIG_SND=y -CONFIG_SND_TIMER=y -CONFIG_SND_PCM=y -# CONFIG_SND_SEQUENCER is not set -# CONFIG_SND_MIXER_OSS is not set -# CONFIG_SND_PCM_OSS is not set -# CONFIG_SND_HRTIMER is not set -# CONFIG_SND_DYNAMIC_MINORS is not set -CONFIG_SND_SUPPORT_OLD_API=y -CONFIG_SND_VERBOSE_PROCFS=y -# CONFIG_SND_VERBOSE_PRINTK is not set -# CONFIG_SND_DEBUG is not set -CONFIG_SND_VMASTER=y -CONFIG_SND_AC97_CODEC=y -CONFIG_SND_DRIVERS=y -# CONFIG_SND_DUMMY is not set -# CONFIG_SND_MTPAV is not set -# CONFIG_SND_SERIAL_U16550 is not set -# CONFIG_SND_MPU401 is not set -# CONFIG_SND_AC97_POWER_SAVE is not set -CONFIG_SND_PCI=y -# CONFIG_SND_AD1889 is not set -# CONFIG_SND_ALS300 is not set -# CONFIG_SND_ALS4000 is not set -# CONFIG_SND_ALI5451 is not set -# CONFIG_SND_ATIIXP is not set -# CONFIG_SND_ATIIXP_MODEM is not set -# CONFIG_SND_AU8810 is not set -# CONFIG_SND_AU8820 is not set -# CONFIG_SND_AU8830 is not set -# CONFIG_SND_AW2 is not set -# CONFIG_SND_AZT3328 is not set -# CONFIG_SND_BT87X is not set -# CONFIG_SND_CA0106 is not set -# CONFIG_SND_CMIPCI is not set -# CONFIG_SND_OXYGEN is not set -# CONFIG_SND_CS4281 is not set -# CONFIG_SND_CS46XX is not set -# CONFIG_SND_CS5530 is not set -# CONFIG_SND_DARLA20 is not set -# CONFIG_SND_GINA20 is not set -# CONFIG_SND_LAYLA20 is not set -# CONFIG_SND_DARLA24 is not set -# CONFIG_SND_GINA24 is not set -# CONFIG_SND_LAYLA24 is not set -# CONFIG_SND_MONA is not set -# CONFIG_SND_MIA is not set -# CONFIG_SND_ECHO3G is not set -# CONFIG_SND_INDIGO is not set -# CONFIG_SND_INDIGOIO is not set -# CONFIG_SND_INDIGODJ is not set -# CONFIG_SND_EMU10K1 is not set -# CONFIG_SND_EMU10K1X is not set -# CONFIG_SND_ENS1370 is not set -# CONFIG_SND_ENS1371 is not set -# CONFIG_SND_ES1938 is not set -# CONFIG_SND_ES1968 is not set -# CONFIG_SND_FM801 is not set -# CONFIG_SND_HDA_INTEL is not set -# CONFIG_SND_HDSP is not set -# CONFIG_SND_HDSPM is not set -# CONFIG_SND_HIFIER is not set -# CONFIG_SND_ICE1712 is not set -# CONFIG_SND_ICE1724 is not set -CONFIG_SND_INTEL8X0=y -# CONFIG_SND_INTEL8X0M is not set -# CONFIG_SND_KORG1212 is not set -# CONFIG_SND_MAESTRO3 is not set -# CONFIG_SND_MIXART is not set -# CONFIG_SND_NM256 is not set -# CONFIG_SND_PCXHR is not set -# CONFIG_SND_RIPTIDE is not set -# CONFIG_SND_RME32 is not set -# CONFIG_SND_RME96 is not set -# CONFIG_SND_RME9652 is not set -# CONFIG_SND_SONICVIBES is not set -# CONFIG_SND_TRIDENT is not set -# CONFIG_SND_VIA82XX is not set -# CONFIG_SND_VIA82XX_MODEM is not set -# CONFIG_SND_VIRTUOSO is not set -# CONFIG_SND_VX222 is not set -# CONFIG_SND_YMFPCI is not set -CONFIG_SND_PPC=y -CONFIG_SND_USB=y -# CONFIG_SND_USB_AUDIO is not set -# CONFIG_SND_USB_USX2Y is not set -# CONFIG_SND_USB_CAIAQ is not set -# CONFIG_SND_SOC is not set -# CONFIG_SOUND_PRIME is not set -CONFIG_AC97_BUS=y -CONFIG_HID_SUPPORT=y -CONFIG_HID=y -# CONFIG_HID_DEBUG is not set -# CONFIG_HIDRAW is not set - -# -# USB Input Devices -# -CONFIG_USB_HID=y -# CONFIG_HID_PID is not set -# CONFIG_USB_HIDDEV is not set - -# -# Special HID drivers -# -CONFIG_HID_COMPAT=y -CONFIG_HID_A4TECH=y -CONFIG_HID_APPLE=y -CONFIG_HID_BELKIN=y -CONFIG_HID_CHERRY=y -CONFIG_HID_CHICONY=y -CONFIG_HID_CYPRESS=y -CONFIG_HID_EZKEY=y -CONFIG_HID_GYRATION=y -CONFIG_HID_LOGITECH=y -# CONFIG_LOGITECH_FF is not set -# CONFIG_LOGIRUMBLEPAD2_FF is not set -CONFIG_HID_MICROSOFT=y -CONFIG_HID_MONTEREY=y -# CONFIG_HID_NTRIG is not set -CONFIG_HID_PANTHERLORD=y -# CONFIG_PANTHERLORD_FF is not set -CONFIG_HID_PETALYNX=y -CONFIG_HID_SAMSUNG=y -CONFIG_HID_SONY=y -CONFIG_HID_SUNPLUS=y -# CONFIG_GREENASIA_FF is not set -# CONFIG_HID_TOPSEED is not set -CONFIG_THRUSTMASTER_FF=m -CONFIG_ZEROPLUS_FF=m -CONFIG_USB_SUPPORT=y -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -CONFIG_USB_ARCH_HAS_EHCI=y -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set -# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set - -# -# Miscellaneous USB options -# -CONFIG_USB_DEVICEFS=y -CONFIG_USB_DEVICE_CLASS=y -# CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_OTG is not set -# CONFIG_USB_OTG_WHITELIST is not set -# CONFIG_USB_OTG_BLACKLIST_HUB is not set -CONFIG_USB_MON=y -# CONFIG_USB_WUSB is not set -# CONFIG_USB_WUSB_CBAF is not set - -# -# USB Host Controller Drivers -# -# CONFIG_USB_C67X00_HCD is not set -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_ROOT_HUB_TT=y -# CONFIG_USB_EHCI_TT_NEWSCHED is not set -CONFIG_USB_EHCI_FSL=y -CONFIG_USB_EHCI_HCD_PPC_OF=y -# CONFIG_USB_OXU210HP_HCD is not set -# CONFIG_USB_ISP116X_HCD is not set -# CONFIG_USB_ISP1760_HCD is not set -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_OHCI_HCD_PPC_OF=y -CONFIG_USB_OHCI_HCD_PPC_OF_BE=y -CONFIG_USB_OHCI_HCD_PPC_OF_LE=y -CONFIG_USB_OHCI_HCD_PCI=y -CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y -CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y -CONFIG_USB_OHCI_LITTLE_ENDIAN=y -# CONFIG_USB_UHCI_HCD is not set -# CONFIG_USB_SL811_HCD is not set -# CONFIG_USB_R8A66597_HCD is not set -# CONFIG_USB_WHCI_HCD is not set -# CONFIG_USB_HWA_HCD is not set - -# -# USB Device Class drivers -# -# CONFIG_USB_ACM is not set -# CONFIG_USB_PRINTER is not set -# CONFIG_USB_WDM is not set -# CONFIG_USB_TMC is not set - -# -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; -# - -# -# see USB_STORAGE Help for more information -# -CONFIG_USB_STORAGE=y -# CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_USBAT is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set -# CONFIG_USB_STORAGE_ALAUDA is not set -# CONFIG_USB_STORAGE_ONETOUCH is not set -# CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set -# CONFIG_USB_LIBUSUAL is not set - -# -# USB Imaging devices -# -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_MICROTEK is not set - -# -# USB port drivers -# -# CONFIG_USB_SERIAL is not set - -# -# USB Miscellaneous drivers -# -# CONFIG_USB_EMI62 is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_ADUTUX is not set -# CONFIG_USB_SEVSEG is not set -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_LEGOTOWER is not set -# CONFIG_USB_LCD is not set -# CONFIG_USB_BERRY_CHARGE is not set -# CONFIG_USB_LED is not set -# CONFIG_USB_CYPRESS_CY7C63 is not set -# CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set -# CONFIG_USB_IDMOUSE is not set -# CONFIG_USB_FTDI_ELAN is not set -# CONFIG_USB_APPLEDISPLAY is not set -# CONFIG_USB_SISUSBVGA is not set -# CONFIG_USB_LD is not set -# CONFIG_USB_TRANCEVIBRATOR is not set -# CONFIG_USB_IOWARRIOR is not set -# CONFIG_USB_TEST is not set -# CONFIG_USB_ISIGHTFW is not set -# CONFIG_USB_VST is not set -# CONFIG_USB_GADGET is not set - -# -# OTG and related infrastructure -# -# CONFIG_UWB is not set -# CONFIG_MMC is not set -# CONFIG_MEMSTICK is not set -# CONFIG_NEW_LEDS is not set -# CONFIG_ACCESSIBILITY is not set -# CONFIG_INFINIBAND is not set -# CONFIG_EDAC is not set -CONFIG_RTC_LIB=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_HCTOSYS=y -CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -# CONFIG_RTC_DEBUG is not set - -# -# RTC interfaces -# -CONFIG_RTC_INTF_SYSFS=y -CONFIG_RTC_INTF_PROC=y -CONFIG_RTC_INTF_DEV=y -# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set -# CONFIG_RTC_DRV_TEST is not set - -# -# I2C RTC drivers -# -# CONFIG_RTC_DRV_DS1307 is not set -# CONFIG_RTC_DRV_DS1374 is not set -# CONFIG_RTC_DRV_DS1672 is not set -# CONFIG_RTC_DRV_MAX6900 is not set -# CONFIG_RTC_DRV_RS5C372 is not set -# CONFIG_RTC_DRV_ISL1208 is not set -# CONFIG_RTC_DRV_X1205 is not set -# CONFIG_RTC_DRV_PCF8563 is not set -# CONFIG_RTC_DRV_PCF8583 is not set -# CONFIG_RTC_DRV_M41T80 is not set -# CONFIG_RTC_DRV_S35390A is not set -# CONFIG_RTC_DRV_FM3130 is not set -# CONFIG_RTC_DRV_RX8581 is not set - -# -# SPI RTC drivers -# - -# -# Platform RTC drivers -# -CONFIG_RTC_DRV_CMOS=y -# CONFIG_RTC_DRV_DS1286 is not set -# CONFIG_RTC_DRV_DS1511 is not set -# CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_DS1742 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set -# CONFIG_RTC_DRV_M48T86 is not set -# CONFIG_RTC_DRV_M48T35 is not set -# CONFIG_RTC_DRV_M48T59 is not set -# CONFIG_RTC_DRV_BQ4802 is not set -# CONFIG_RTC_DRV_V3020 is not set - -# -# on-CPU RTC drivers -# -# CONFIG_RTC_DRV_PPC is not set -CONFIG_DMADEVICES=y - -# -# DMA Devices -# -CONFIG_FSL_DMA=y -CONFIG_DMA_ENGINE=y - -# -# DMA Clients -# -# CONFIG_NET_DMA is not set -# CONFIG_DMATEST is not set -# CONFIG_UIO is not set -# CONFIG_STAGING is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4_FS is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y -# CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_BTRFS_FS is not set -CONFIG_DNOTIFY=y -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=m -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_UDF_FS=m -CONFIG_UDF_NLS=y - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=y -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=y -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -CONFIG_NTFS_FS=y -# CONFIG_NTFS_DEBUG is not set -# CONFIG_NTFS_RW is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_PROC_SYSCTL=y -CONFIG_PROC_PAGE_MONITOR=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -# CONFIG_CONFIGFS_FS is not set -CONFIG_MISC_FILESYSTEMS=y -CONFIG_ADFS_FS=m -# CONFIG_ADFS_FS_RW is not set -CONFIG_AFFS_FS=m -CONFIG_HFS_FS=m -CONFIG_HFSPLUS_FS=m -CONFIG_BEFS_FS=m -# CONFIG_BEFS_DEBUG is not set -CONFIG_BFS_FS=m -CONFIG_EFS_FS=m -CONFIG_CRAMFS=y -# CONFIG_SQUASHFS is not set -CONFIG_VXFS_FS=m -# CONFIG_MINIX_FS is not set -# CONFIG_OMFS_FS is not set -CONFIG_HPFS_FS=m -CONFIG_QNX4FS_FS=m -# CONFIG_ROMFS_FS is not set -CONFIG_SYSV_FS=m -CONFIG_UFS_FS=m -# CONFIG_UFS_FS_WRITE is not set -# CONFIG_UFS_DEBUG is not set -CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_NFSD=y -# CONFIG_NFSD_V3 is not set -# CONFIG_NFSD_V4 is not set -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set -CONFIG_RPCSEC_GSS_KRB5=y -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -CONFIG_MAC_PARTITION=y -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_KARMA_PARTITION is not set -# CONFIG_EFI_PARTITION is not set -# CONFIG_SYSV68_PARTITION is not set -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -# CONFIG_NLS_CODEPAGE_437 is not set -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set -# CONFIG_NLS_ISO8859_1 is not set -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -CONFIG_NLS_UTF8=m -# CONFIG_DLM is not set - -# -# Library routines -# -CONFIG_BITREVERSE=y -CONFIG_GENERIC_FIND_LAST_BIT=y -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -CONFIG_CRC_T10DIF=y -CONFIG_CRC_ITU_T=m -CONFIG_CRC32=y -# CONFIG_CRC7 is not set -CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=y -CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y -CONFIG_HAVE_LMB=y - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_WARN_DEPRECATED=y -CONFIG_ENABLE_MUST_CHECK=y -CONFIG_FRAME_WARN=1024 -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -CONFIG_DEBUG_FS=y -# CONFIG_HEADERS_CHECK is not set -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_SHIRQ is not set -CONFIG_DETECT_SOFTLOCKUP=y -# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set -CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 -CONFIG_SCHED_DEBUG=y -# CONFIG_SCHEDSTATS is not set -# CONFIG_TIMER_STATS is not set -# CONFIG_DEBUG_OBJECTS is not set -# CONFIG_SLUB_DEBUG_ON is not set -# CONFIG_SLUB_STATS is not set -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_RT_MUTEX_TESTER is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -# CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_HIGHMEM is not set -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_DEBUG_INFO=y -# CONFIG_DEBUG_VM is not set -# CONFIG_DEBUG_WRITECOUNT is not set -# CONFIG_DEBUG_MEMORY_INIT is not set -# CONFIG_DEBUG_LIST is not set -# CONFIG_DEBUG_SG is not set -# CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set -# CONFIG_RCU_TORTURE_TEST is not set -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -# CONFIG_BACKTRACE_SELF_TEST is not set -# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set -# CONFIG_FAULT_INJECTION is not set -# CONFIG_LATENCYTOP is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set -# CONFIG_SAMPLES is not set -CONFIG_HAVE_ARCH_KGDB=y -# CONFIG_KGDB is not set -CONFIG_PRINT_STACK_DEPTH=64 -# CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_CODE_PATCHING_SELFTEST is not set -# CONFIG_FTR_FIXUP_SELFTEST is not set -# CONFIG_MSI_BITMAP_SELFTEST is not set -# CONFIG_XMON is not set -# CONFIG_IRQSTACKS is not set -# CONFIG_VIRQ_DEBUG is not set -# CONFIG_BDI_SWITCH is not set -# CONFIG_PPC_EARLY_DEBUG is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -# CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set -CONFIG_CRYPTO=y - -# -# Crypto core or helper -# -# CONFIG_CRYPTO_FIPS is not set -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_ALGAPI2=y -CONFIG_CRYPTO_AEAD=y -CONFIG_CRYPTO_AEAD2=y -CONFIG_CRYPTO_BLKCIPHER=y -CONFIG_CRYPTO_BLKCIPHER2=y -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_HASH2=y -CONFIG_CRYPTO_RNG2=y -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_MANAGER2=y -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_NULL is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_AUTHENC=y -# CONFIG_CRYPTO_TEST is not set - -# -# Authenticated Encryption with Associated Data -# -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_SEQIV is not set - -# -# Block modes -# -CONFIG_CRYPTO_CBC=y -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_CTS is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_LRW is not set -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_XTS is not set - -# -# Hash modes -# -CONFIG_CRYPTO_HMAC=y -# CONFIG_CRYPTO_XCBC is not set - -# -# Digest -# -CONFIG_CRYPTO_CRC32C=m -# CONFIG_CRYPTO_MD4 is not set -CONFIG_CRYPTO_MD5=y -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_RMD128 is not set -# CONFIG_CRYPTO_RMD160 is not set -# CONFIG_CRYPTO_RMD256 is not set -# CONFIG_CRYPTO_RMD320 is not set -CONFIG_CRYPTO_SHA1=m -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_WP512 is not set - -# -# Ciphers -# -# CONFIG_CRYPTO_AES is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_ARC4 is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_CAST5 is not set -# CONFIG_CRYPTO_CAST6 is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_SALSA20 is not set -# CONFIG_CRYPTO_SEED is not set -# CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_TWOFISH is not set - -# -# Compression -# -# CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_LZO is not set - -# -# Random Number Generation -# -# CONFIG_CRYPTO_ANSI_CPRNG is not set -CONFIG_CRYPTO_HW=y -# CONFIG_CRYPTO_DEV_HIFN_795X is not set -CONFIG_CRYPTO_DEV_TALITOS=y -# CONFIG_PPC_CLOCK is not set -# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/85xx/mpc8544_ds_defconfig b/arch/powerpc/configs/85xx/mpc8544_ds_defconfig deleted file mode 100644 index f6fa0b761cb..00000000000 --- a/arch/powerpc/configs/85xx/mpc8544_ds_defconfig +++ /dev/null @@ -1,1802 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:36:07 2009 -# -# CONFIG_PPC64 is not set - -# -# Processor support -# -# CONFIG_6xx is not set -CONFIG_PPC_85xx=y -# CONFIG_PPC_8xx is not set -# CONFIG_40x is not set -# CONFIG_44x is not set -# CONFIG_E200 is not set -CONFIG_E500=y -# CONFIG_PPC_E500MC is not set -CONFIG_BOOKE=y -CONFIG_FSL_BOOKE=y -CONFIG_FSL_EMB_PERFMON=y -# CONFIG_PHYS_64BIT is not set -CONFIG_SPE=y -CONFIG_PPC_MMU_NOHASH=y -# CONFIG_PPC_MM_SLICES is not set -# CONFIG_SMP is not set -CONFIG_PPC32=y -CONFIG_WORD_SIZE=32 -# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set -CONFIG_MMU=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_GENERIC_TIME=y -CONFIG_GENERIC_TIME_VSYSCALL=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_HARDIRQS=y -# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set -CONFIG_IRQ_PER_CPU=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_HAVE_LATENCYTOP_SUPPORT=y -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_ARCH_HAS_ILOG2_U32=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_FIND_NEXT_BIT=y -# CONFIG_ARCH_NO_VIRT_TO_BUS is not set -CONFIG_PPC=y -CONFIG_EARLY_PRINTK=y -CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_OMIT_FRAME_POINTER=y -CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_PPC_OF=y -CONFIG_OF=y -CONFIG_PPC_UDBG_16550=y -# CONFIG_GENERIC_TBSYNC is not set -CONFIG_AUDIT_ARCH=y -CONFIG_GENERIC_BUG=y -CONFIG_DEFAULT_UIMAGE=y -# CONFIG_PPC_DCR_NATIVE is not set -# CONFIG_PPC_DCR_MMIO is not set -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# General setup -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -CONFIG_POSIX_MQUEUE=y -CONFIG_BSD_PROCESS_ACCT=y -# CONFIG_BSD_PROCESS_ACCT_V3 is not set -# CONFIG_TASKSTATS is not set -CONFIG_AUDIT=y -# CONFIG_AUDITSYSCALL is not set -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_GROUP_SCHED=y -# CONFIG_FAIR_GROUP_SCHED is not set -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set -# CONFIG_CGROUPS is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y -# CONFIG_RELAY is not set -# CONFIG_NAMESPACES is not set -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_KALLSYMS=y -CONFIG_KALLSYMS_ALL=y -CONFIG_KALLSYMS_STRIP_GENERATED=y -CONFIG_KALLSYMS_EXTRA_PASS=y -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_ANON_INODES=y -CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -CONFIG_AIO=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_PCI_QUIRKS=y -CONFIG_SLUB_DEBUG=y -# CONFIG_SLAB is not set -CONFIG_SLUB=y -# CONFIG_SLOB is not set -# CONFIG_PROFILING is not set -CONFIG_HAVE_OPROFILE=y -# CONFIG_KPROBES is not set -CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y -CONFIG_HAVE_IOREMAP_PROT=y -CONFIG_HAVE_KPROBES=y -CONFIG_HAVE_KRETPROBES=y -CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set -CONFIG_SLABINFO=y -CONFIG_RT_MUTEXES=y -CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -# CONFIG_MODULE_FORCE_LOAD is not set -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MODVERSIONS=y -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_BLOCK=y -CONFIG_LBD=y -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_BLK_DEV_INTEGRITY is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set -# CONFIG_DEFAULT_DEADLINE is not set -CONFIG_DEFAULT_CFQ=y -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set -# CONFIG_FREEZER is not set - -# -# Platform support -# -# CONFIG_PPC_CELL is not set -# CONFIG_PPC_CELL_NATIVE is not set -# CONFIG_PQ2ADS is not set -CONFIG_MPC85xx=y -# CONFIG_MPC8540_ADS is not set -# CONFIG_MPC8560_ADS is not set -# CONFIG_MPC85xx_CDS is not set -# CONFIG_MPC85xx_MDS is not set -# CONFIG_MPC8536_DS is not set -CONFIG_MPC85xx_DS=y -# CONFIG_KSI8560 is not set -# CONFIG_STX_GP3 is not set -# CONFIG_TQM8540 is not set -# CONFIG_TQM8541 is not set -# CONFIG_TQM8548 is not set -# CONFIG_TQM8555 is not set -# CONFIG_TQM8560 is not set -# CONFIG_SBC8548 is not set -# CONFIG_SBC8560 is not set -# CONFIG_IPIC is not set -CONFIG_MPIC=y -# CONFIG_MPIC_WEIRD is not set -CONFIG_PPC_I8259=y -# CONFIG_PPC_RTAS is not set -# CONFIG_MMIO_NVRAM is not set -# CONFIG_PPC_MPC106 is not set -# CONFIG_PPC_970_NAP is not set -# CONFIG_PPC_INDIRECT_IO is not set -# CONFIG_GENERIC_IOMAP is not set -# CONFIG_CPU_FREQ is not set -# CONFIG_QUICC_ENGINE is not set -# CONFIG_CPM2 is not set -CONFIG_FSL_ULI1575=y -# CONFIG_MPC8xxx_GPIO is not set -# CONFIG_SIMPLE_GPIO is not set - -# -# Kernel options -# -CONFIG_HIGHMEM=y -CONFIG_TICK_ONESHOT=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_300 is not set -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_SCHED_HRTICK=y -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -CONFIG_BINFMT_ELF=y -# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set -# CONFIG_HAVE_AOUT is not set -CONFIG_BINFMT_MISC=m -CONFIG_MATH_EMULATION=y -# CONFIG_IOMMU_HELPER is not set -CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y -CONFIG_ARCH_HAS_WALK_MEMORY=y -CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_ARCH_POPULATES_NODE_MAP=y -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_SPLIT_PTLOCK_CPUS=4 -CONFIG_MIGRATION=y -# CONFIG_PHYS_ADDR_T_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y -CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y -CONFIG_PPC_4K_PAGES=y -# CONFIG_PPC_16K_PAGES is not set -# CONFIG_PPC_64K_PAGES is not set -CONFIG_FORCE_MAX_ZONEORDER=11 -CONFIG_PROC_DEVICETREE=y -# CONFIG_CMDLINE_BOOL is not set -CONFIG_EXTRA_TARGETS="" -# CONFIG_PM is not set -CONFIG_SECCOMP=y -CONFIG_ISA_DMA_API=y - -# -# Bus options -# -CONFIG_ZONE_DMA=y -CONFIG_GENERIC_ISA_DMA=y -CONFIG_PPC_INDIRECT_PCI=y -CONFIG_FSL_SOC=y -CONFIG_FSL_PCI=y -CONFIG_PPC_PCI_CHOICE=y -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_SYSCALL=y -# CONFIG_PCIEPORTBUS is not set -CONFIG_ARCH_SUPPORTS_MSI=y -# CONFIG_PCI_MSI is not set -# CONFIG_PCI_LEGACY is not set -# CONFIG_PCI_DEBUG is not set -# CONFIG_PCI_STUB is not set -# CONFIG_PCCARD is not set -# CONFIG_HOTPLUG_PCI is not set -# CONFIG_HAS_RAPIDIO is not set - -# -# Advanced setup -# -# CONFIG_ADVANCED_OPTIONS is not set - -# -# Default settings for advanced configuration options are used -# -CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_PAGE_OFFSET=0xc0000000 -CONFIG_KERNEL_START=0xc0000000 -CONFIG_PHYSICAL_START=0x00000000 -CONFIG_PHYSICAL_ALIGN=0x10000000 -CONFIG_TASK_SIZE=0xc0000000 -CONFIG_NET=y - -# -# Networking options -# -CONFIG_COMPAT_NET_DEV_OPS=y -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -CONFIG_XFRM=y -CONFIG_XFRM_USER=y -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set -# CONFIG_XFRM_STATISTICS is not set -CONFIG_NET_KEY=m -# CONFIG_NET_KEY_MIGRATE is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_ADVANCED_ROUTER=y -CONFIG_ASK_IP_FIB_HASH=y -# CONFIG_IP_FIB_TRIE is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_MULTIPLE_TABLES=y -CONFIG_IP_ROUTE_MULTIPATH=y -CONFIG_IP_ROUTE_VERBOSE=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -CONFIG_NET_IPIP=y -CONFIG_NET_IPGRE=y -CONFIG_NET_IPGRE_BROADCAST=y -CONFIG_IP_MROUTE=y -CONFIG_IP_PIMSM_V1=y -CONFIG_IP_PIMSM_V2=y -CONFIG_ARPD=y -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -CONFIG_INET_TUNNEL=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -CONFIG_IPV6=y -# CONFIG_IPV6_PRIVACY is not set -# CONFIG_IPV6_ROUTER_PREF is not set -# CONFIG_IPV6_OPTIMISTIC_DAD is not set -# CONFIG_INET6_AH is not set -# CONFIG_INET6_ESP is not set -# CONFIG_INET6_IPCOMP is not set -# CONFIG_IPV6_MIP6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set -CONFIG_INET6_XFRM_MODE_TRANSPORT=y -CONFIG_INET6_XFRM_MODE_TUNNEL=y -CONFIG_INET6_XFRM_MODE_BEET=y -# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set -CONFIG_IPV6_SIT=y -CONFIG_IPV6_NDISC_NODETYPE=y -# CONFIG_IPV6_TUNNEL is not set -# CONFIG_IPV6_MULTIPLE_TABLES is not set -# CONFIG_IPV6_MROUTE is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set -# CONFIG_IP_DCCP is not set -CONFIG_IP_SCTP=m -# CONFIG_SCTP_DBG_MSG is not set -# CONFIG_SCTP_DBG_OBJCNT is not set -# CONFIG_SCTP_HMAC_NONE is not set -# CONFIG_SCTP_HMAC_SHA1 is not set -CONFIG_SCTP_HMAC_MD5=y -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_NET_DSA is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set -# CONFIG_DCB is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_CAN is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set -CONFIG_FIB_RULES=y -CONFIG_WIRELESS=y -# CONFIG_CFG80211 is not set -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set -# CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set -# CONFIG_WIMAX is not set -# CONFIG_RFKILL is not set -# CONFIG_NET_9P is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=y -CONFIG_FIRMWARE_IN_KERNEL=y -CONFIG_EXTRA_FIRMWARE="" -# CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set -# CONFIG_SYS_HYPERVISOR is not set -# CONFIG_CONNECTOR is not set -# CONFIG_MTD is not set -CONFIG_OF_DEVICE=y -CONFIG_OF_I2C=y -# CONFIG_PARPORT is not set -CONFIG_BLK_DEV=y -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -CONFIG_BLK_DEV_NBD=y -# CONFIG_BLK_DEV_SX8 is not set -# CONFIG_BLK_DEV_UB is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=131072 -# CONFIG_BLK_DEV_XIP is not set -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set -# CONFIG_BLK_DEV_HD is not set -CONFIG_MISC_DEVICES=y -# CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set -# CONFIG_SGI_IOC4 is not set -# CONFIG_TIFM_CORE is not set -# CONFIG_ICS932S401 is not set -# CONFIG_ENCLOSURE_SERVICES is not set -# CONFIG_HP_ILO is not set -# CONFIG_C2PORT is not set -CONFIG_HAVE_IDE=y -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=y -CONFIG_SCSI_DMA=y -# CONFIG_SCSI_TGT is not set -# CONFIG_SCSI_NETLINK is not set -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_ST=y -# CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=y -# CONFIG_BLK_DEV_SR_VENDOR is not set -CONFIG_CHR_DEV_SG=y -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_CONSTANTS is not set -CONFIG_SCSI_LOGGING=y -# CONFIG_SCSI_SCAN_ASYNC is not set -CONFIG_SCSI_WAIT_SCAN=m - -# -# SCSI Transports -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_LIBSAS is not set -# CONFIG_SCSI_SRP_ATTRS is not set -CONFIG_SCSI_LOWLEVEL=y -# CONFIG_ISCSI_TCP is not set -# CONFIG_SCSI_CXGB3_ISCSI is not set -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_SCSI_AIC94XX is not set -# CONFIG_SCSI_DPT_I2O is not set -# CONFIG_SCSI_ADVANSYS is not set -# CONFIG_SCSI_ARCMSR is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_HPTIOP is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_LIBFC is not set -# CONFIG_FCOE is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set -# CONFIG_SCSI_STEX is not set -# CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -# CONFIG_SCSI_QLA_FC is not set -# CONFIG_SCSI_QLA_ISCSI is not set -# CONFIG_SCSI_LPFC is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_SRP is not set -# CONFIG_SCSI_DH is not set -CONFIG_ATA=y -# CONFIG_ATA_NONSTANDARD is not set -CONFIG_SATA_PMP=y -CONFIG_SATA_AHCI=y -# CONFIG_SATA_SIL24 is not set -# CONFIG_SATA_FSL is not set -CONFIG_ATA_SFF=y -# CONFIG_SATA_SVW is not set -# CONFIG_ATA_PIIX is not set -# CONFIG_SATA_MV is not set -# CONFIG_SATA_NV is not set -# CONFIG_PDC_ADMA is not set -# CONFIG_SATA_QSTOR is not set -# CONFIG_SATA_PROMISE is not set -# CONFIG_SATA_SX4 is not set -# CONFIG_SATA_SIL is not set -# CONFIG_SATA_SIS is not set -# CONFIG_SATA_ULI is not set -# CONFIG_SATA_VIA is not set -# CONFIG_SATA_VITESSE is not set -# CONFIG_SATA_INIC162X is not set -CONFIG_PATA_ALI=y -# CONFIG_PATA_AMD is not set -# CONFIG_PATA_ARTOP is not set -# CONFIG_PATA_ATIIXP is not set -# CONFIG_PATA_CMD640_PCI is not set -# CONFIG_PATA_CMD64X is not set -# CONFIG_PATA_CS5520 is not set -# CONFIG_PATA_CS5530 is not set -# CONFIG_PATA_CYPRESS is not set -# CONFIG_PATA_EFAR is not set -# CONFIG_ATA_GENERIC is not set -# CONFIG_PATA_HPT366 is not set -# CONFIG_PATA_HPT37X is not set -# CONFIG_PATA_HPT3X2N is not set -# CONFIG_PATA_HPT3X3 is not set -# CONFIG_PATA_IT821X is not set -# CONFIG_PATA_IT8213 is not set -# CONFIG_PATA_JMICRON is not set -# CONFIG_PATA_TRIFLEX is not set -# CONFIG_PATA_MARVELL is not set -# CONFIG_PATA_MPIIX is not set -# CONFIG_PATA_OLDPIIX is not set -# CONFIG_PATA_NETCELL is not set -# CONFIG_PATA_NINJA32 is not set -# CONFIG_PATA_NS87410 is not set -# CONFIG_PATA_NS87415 is not set -# CONFIG_PATA_OPTI is not set -# CONFIG_PATA_OPTIDMA is not set -# CONFIG_PATA_PDC_OLD is not set -# CONFIG_PATA_RADISYS is not set -# CONFIG_PATA_RZ1000 is not set -# CONFIG_PATA_SC1200 is not set -# CONFIG_PATA_SERVERWORKS is not set -# CONFIG_PATA_PDC2027X is not set -# CONFIG_PATA_SIL680 is not set -# CONFIG_PATA_SIS is not set -# CONFIG_PATA_VIA is not set -# CONFIG_PATA_WINBOND is not set -# CONFIG_PATA_PLATFORM is not set -# CONFIG_PATA_SCH is not set -# CONFIG_MD is not set -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# Enable only one of the two stacks, unless you know what you are doing -# -# CONFIG_FIREWIRE is not set -# CONFIG_IEEE1394 is not set -# CONFIG_I2O is not set -# CONFIG_MACINTOSH_DRIVERS is not set -CONFIG_NETDEVICES=y -CONFIG_DUMMY=y -# CONFIG_BONDING is not set -# CONFIG_MACVLAN is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_VETH is not set -# CONFIG_ARCNET is not set -CONFIG_PHYLIB=y - -# -# MII PHY device drivers -# -# CONFIG_MARVELL_PHY is not set -# CONFIG_DAVICOM_PHY is not set -# CONFIG_QSEMI_PHY is not set -# CONFIG_LXT_PHY is not set -# CONFIG_CICADA_PHY is not set -CONFIG_VITESSE_PHY=y -# CONFIG_SMSC_PHY is not set -# CONFIG_BROADCOM_PHY is not set -# CONFIG_ICPLUS_PHY is not set -# CONFIG_REALTEK_PHY is not set -# CONFIG_NATIONAL_PHY is not set -# CONFIG_STE10XP is not set -# CONFIG_LSI_ET1011C_PHY is not set -# CONFIG_FIXED_PHY is not set -# CONFIG_MDIO_BITBANG is not set -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -# CONFIG_NET_VENDOR_3COM is not set -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -# CONFIG_IBM_NEW_EMAC_ZMII is not set -# CONFIG_IBM_NEW_EMAC_RGMII is not set -# CONFIG_IBM_NEW_EMAC_TAH is not set -# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set -# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set -# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set -# CONFIG_NET_PCI is not set -# CONFIG_B44 is not set -# CONFIG_ATL2 is not set -CONFIG_NETDEV_1000=y -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_E1000E is not set -# CONFIG_IP1000 is not set -# CONFIG_IGB is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SKY2 is not set -# CONFIG_VIA_VELOCITY is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set -CONFIG_GIANFAR=y -# CONFIG_QLA3XXX is not set -# CONFIG_ATL1 is not set -# CONFIG_ATL1E is not set -# CONFIG_JME is not set -CONFIG_NETDEV_10000=y -# CONFIG_CHELSIO_T1 is not set -CONFIG_CHELSIO_T3_DEPENDS=y -# CONFIG_CHELSIO_T3 is not set -# CONFIG_ENIC is not set -# CONFIG_IXGBE is not set -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set -# CONFIG_MYRI10GE is not set -# CONFIG_NETXEN_NIC is not set -# CONFIG_NIU is not set -# CONFIG_MLX4_EN is not set -# CONFIG_MLX4_CORE is not set -# CONFIG_TEHUTI is not set -# CONFIG_BNX2X is not set -# CONFIG_QLGE is not set -# CONFIG_SFC is not set -# CONFIG_TR is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set - -# -# Enable WiMAX (Networking options) to see the WiMAX drivers -# - -# -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET is not set -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_NET_FC is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_ISDN is not set -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y -CONFIG_INPUT_FF_MEMLESS=m -# CONFIG_INPUT_POLLDEV is not set - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -CONFIG_SERIO_I8042=y -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_PCIPS2 is not set -CONFIG_SERIO_LIBPS2=y -# CONFIG_SERIO_RAW is not set -# CONFIG_SERIO_XILINX_XPS_PS2 is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_CONSOLE_TRANSLATIONS=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_VT_HW_CONSOLE_BINDING is not set -CONFIG_DEVKMEM=y -# CONFIG_SERIAL_NONSTANDARD is not set -# CONFIG_NOZOMI is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_PCI=y -CONFIG_SERIAL_8250_NR_UARTS=2 -CONFIG_SERIAL_8250_RUNTIME_UARTS=2 -CONFIG_SERIAL_8250_EXTENDED=y -CONFIG_SERIAL_8250_MANY_PORTS=y -CONFIG_SERIAL_8250_SHARE_IRQ=y -CONFIG_SERIAL_8250_DETECT_IRQ=y -CONFIG_SERIAL_8250_RSA=y - -# -# Non-8250 serial port support -# -# CONFIG_SERIAL_UARTLITE is not set -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set -# CONFIG_SERIAL_OF_PLATFORM is not set -CONFIG_UNIX98_PTYS=y -# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_HVC_UDBG is not set -# CONFIG_IPMI_HANDLER is not set -CONFIG_HW_RANDOM=y -CONFIG_NVRAM=y -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_TCG_TPM is not set -CONFIG_DEVPORT=y -CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y -# CONFIG_I2C_CHARDEV is not set -CONFIG_I2C_HELPER_AUTO=y - -# -# I2C Hardware Bus support -# - -# -# PC SMBus host controller drivers -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_ISCH is not set -# CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set - -# -# I2C system bus drivers (mostly embedded / system-on-chip) -# -CONFIG_I2C_MPC=y -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_SIMTEC is not set - -# -# External I2C/SMBus adapter drivers -# -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_TINY_USB is not set - -# -# Graphics adapter I2C/DDC channel drivers -# -# CONFIG_I2C_VOODOO3 is not set - -# -# Other I2C/SMBus bus drivers -# -# CONFIG_I2C_PCA_PLATFORM is not set -# CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -CONFIG_EEPROM_LEGACY=y -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_SENSORS_TSL2550 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set -# CONFIG_SPI is not set -CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y -# CONFIG_GPIOLIB is not set -# CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set -# CONFIG_HWMON is not set -# CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set -# CONFIG_WATCHDOG is not set -CONFIG_SSB_POSSIBLE=y - -# -# Sonics Silicon Backplane -# -# CONFIG_SSB is not set - -# -# Multifunction device drivers -# -# CONFIG_MFD_CORE is not set -# CONFIG_MFD_SM501 is not set -# CONFIG_HTC_PASIC3 is not set -# CONFIG_TWL4030_CORE is not set -# CONFIG_MFD_TMIO is not set -# CONFIG_PMIC_DA903X is not set -# CONFIG_MFD_WM8400 is not set -# CONFIG_MFD_WM8350_I2C is not set -# CONFIG_MFD_PCF50633 is not set -# CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -CONFIG_DVB_CORE=m -CONFIG_VIDEO_MEDIA=m - -# -# Multimedia drivers -# -# CONFIG_MEDIA_ATTACH is not set -CONFIG_MEDIA_TUNER=m -# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set -CONFIG_MEDIA_TUNER_SIMPLE=m -CONFIG_MEDIA_TUNER_TDA8290=m -CONFIG_MEDIA_TUNER_TDA9887=m -CONFIG_MEDIA_TUNER_TEA5761=m -CONFIG_MEDIA_TUNER_TEA5767=m -CONFIG_MEDIA_TUNER_MT20XX=m -CONFIG_MEDIA_TUNER_XC2028=m -CONFIG_MEDIA_TUNER_XC5000=m -# CONFIG_DVB_DYNAMIC_MINORS is not set -CONFIG_DVB_CAPTURE_DRIVERS=y - -# -# Supported SAA7146 based PCI Adapters -# -# CONFIG_TTPCI_EEPROM is not set -# CONFIG_DVB_BUDGET_CORE is not set - -# -# Supported USB Adapters -# -# CONFIG_DVB_USB is not set -# CONFIG_DVB_TTUSB_BUDGET is not set -# CONFIG_DVB_TTUSB_DEC is not set -# CONFIG_DVB_SIANO_SMS1XXX is not set - -# -# Supported FlexCopII (B2C2) Adapters -# -# CONFIG_DVB_B2C2_FLEXCOP is not set - -# -# Supported BT878 Adapters -# - -# -# Supported Pluto2 Adapters -# -# CONFIG_DVB_PLUTO2 is not set - -# -# Supported SDMC DM1105 Adapters -# -# CONFIG_DVB_DM1105 is not set - -# -# Supported DVB Frontends -# - -# -# Customise DVB Frontends -# -# CONFIG_DVB_FE_CUSTOMISE is not set - -# -# Multistandard (satellite) frontends -# -# CONFIG_DVB_STB0899 is not set -# CONFIG_DVB_STB6100 is not set - -# -# DVB-S (satellite) frontends -# -# CONFIG_DVB_CX24110 is not set -# CONFIG_DVB_CX24123 is not set -# CONFIG_DVB_MT312 is not set -# CONFIG_DVB_S5H1420 is not set -# CONFIG_DVB_STV0288 is not set -# CONFIG_DVB_STB6000 is not set -# CONFIG_DVB_STV0299 is not set -# CONFIG_DVB_TDA8083 is not set -# CONFIG_DVB_TDA10086 is not set -# CONFIG_DVB_TDA8261 is not set -# CONFIG_DVB_VES1X93 is not set -# CONFIG_DVB_TUNER_ITD1000 is not set -# CONFIG_DVB_TUNER_CX24113 is not set -# CONFIG_DVB_TDA826X is not set -# CONFIG_DVB_TUA6100 is not set -# CONFIG_DVB_CX24116 is not set -# CONFIG_DVB_SI21XX is not set - -# -# DVB-T (terrestrial) frontends -# -# CONFIG_DVB_SP8870 is not set -# CONFIG_DVB_SP887X is not set -# CONFIG_DVB_CX22700 is not set -# CONFIG_DVB_CX22702 is not set -# CONFIG_DVB_DRX397XD is not set -# CONFIG_DVB_L64781 is not set -# CONFIG_DVB_TDA1004X is not set -# CONFIG_DVB_NXT6000 is not set -# CONFIG_DVB_MT352 is not set -# CONFIG_DVB_ZL10353 is not set -# CONFIG_DVB_DIB3000MB is not set -# CONFIG_DVB_DIB3000MC is not set -# CONFIG_DVB_DIB7000M is not set -# CONFIG_DVB_DIB7000P is not set -# CONFIG_DVB_TDA10048 is not set - -# -# DVB-C (cable) frontends -# -# CONFIG_DVB_VES1820 is not set -# CONFIG_DVB_TDA10021 is not set -# CONFIG_DVB_TDA10023 is not set -# CONFIG_DVB_STV0297 is not set - -# -# ATSC (North American/Korean Terrestrial/Cable DTV) frontends -# -# CONFIG_DVB_NXT200X is not set -# CONFIG_DVB_OR51211 is not set -# CONFIG_DVB_OR51132 is not set -# CONFIG_DVB_BCM3510 is not set -# CONFIG_DVB_LGDT330X is not set -# CONFIG_DVB_LGDT3304 is not set -# CONFIG_DVB_S5H1409 is not set -# CONFIG_DVB_AU8522 is not set -# CONFIG_DVB_S5H1411 is not set - -# -# ISDB-T (terrestrial) frontends -# -# CONFIG_DVB_S921 is not set - -# -# Digital terrestrial only tuners/PLL -# -# CONFIG_DVB_PLL is not set -# CONFIG_DVB_TUNER_DIB0070 is not set - -# -# SEC control devices for DVB-S -# -# CONFIG_DVB_LNBP21 is not set -# CONFIG_DVB_ISL6405 is not set -# CONFIG_DVB_ISL6421 is not set -# CONFIG_DVB_LGS8GL5 is not set - -# -# Tools to develop new frontends -# -# CONFIG_DVB_DUMMY_FE is not set -# CONFIG_DVB_AF9013 is not set -CONFIG_DAB=y -# CONFIG_USB_DABUSB is not set - -# -# Graphics support -# -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_VGASTATE is not set -CONFIG_VIDEO_OUTPUT_CONTROL=y -# CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set - -# -# Console display driver support -# -CONFIG_VGA_CONSOLE=y -# CONFIG_VGACON_SOFT_SCROLLBACK is not set -CONFIG_DUMMY_CONSOLE=y -CONFIG_SOUND=y -CONFIG_SOUND_OSS_CORE=y -CONFIG_SND=y -CONFIG_SND_TIMER=y -CONFIG_SND_PCM=y -# CONFIG_SND_SEQUENCER is not set -CONFIG_SND_OSSEMUL=y -CONFIG_SND_MIXER_OSS=y -CONFIG_SND_PCM_OSS=y -CONFIG_SND_PCM_OSS_PLUGINS=y -# CONFIG_SND_HRTIMER is not set -# CONFIG_SND_DYNAMIC_MINORS is not set -# CONFIG_SND_SUPPORT_OLD_API is not set -CONFIG_SND_VERBOSE_PROCFS=y -# CONFIG_SND_VERBOSE_PRINTK is not set -# CONFIG_SND_DEBUG is not set -CONFIG_SND_VMASTER=y -CONFIG_SND_AC97_CODEC=y -CONFIG_SND_DRIVERS=y -# CONFIG_SND_DUMMY is not set -# CONFIG_SND_MTPAV is not set -# CONFIG_SND_SERIAL_U16550 is not set -# CONFIG_SND_MPU401 is not set -# CONFIG_SND_AC97_POWER_SAVE is not set -CONFIG_SND_PCI=y -# CONFIG_SND_AD1889 is not set -# CONFIG_SND_ALS300 is not set -# CONFIG_SND_ALS4000 is not set -# CONFIG_SND_ALI5451 is not set -# CONFIG_SND_ATIIXP is not set -# CONFIG_SND_ATIIXP_MODEM is not set -# CONFIG_SND_AU8810 is not set -# CONFIG_SND_AU8820 is not set -# CONFIG_SND_AU8830 is not set -# CONFIG_SND_AW2 is not set -# CONFIG_SND_AZT3328 is not set -# CONFIG_SND_BT87X is not set -# CONFIG_SND_CA0106 is not set -# CONFIG_SND_CMIPCI is not set -# CONFIG_SND_OXYGEN is not set -# CONFIG_SND_CS4281 is not set -# CONFIG_SND_CS46XX is not set -# CONFIG_SND_CS5530 is not set -# CONFIG_SND_DARLA20 is not set -# CONFIG_SND_GINA20 is not set -# CONFIG_SND_LAYLA20 is not set -# CONFIG_SND_DARLA24 is not set -# CONFIG_SND_GINA24 is not set -# CONFIG_SND_LAYLA24 is not set -# CONFIG_SND_MONA is not set -# CONFIG_SND_MIA is not set -# CONFIG_SND_ECHO3G is not set -# CONFIG_SND_INDIGO is not set -# CONFIG_SND_INDIGOIO is not set -# CONFIG_SND_INDIGODJ is not set -# CONFIG_SND_EMU10K1 is not set -# CONFIG_SND_EMU10K1X is not set -# CONFIG_SND_ENS1370 is not set -# CONFIG_SND_ENS1371 is not set -# CONFIG_SND_ES1938 is not set -# CONFIG_SND_ES1968 is not set -# CONFIG_SND_FM801 is not set -# CONFIG_SND_HDA_INTEL is not set -# CONFIG_SND_HDSP is not set -# CONFIG_SND_HDSPM is not set -# CONFIG_SND_HIFIER is not set -# CONFIG_SND_ICE1712 is not set -# CONFIG_SND_ICE1724 is not set -CONFIG_SND_INTEL8X0=y -# CONFIG_SND_INTEL8X0M is not set -# CONFIG_SND_KORG1212 is not set -# CONFIG_SND_MAESTRO3 is not set -# CONFIG_SND_MIXART is not set -# CONFIG_SND_NM256 is not set -# CONFIG_SND_PCXHR is not set -# CONFIG_SND_RIPTIDE is not set -# CONFIG_SND_RME32 is not set -# CONFIG_SND_RME96 is not set -# CONFIG_SND_RME9652 is not set -# CONFIG_SND_SONICVIBES is not set -# CONFIG_SND_TRIDENT is not set -# CONFIG_SND_VIA82XX is not set -# CONFIG_SND_VIA82XX_MODEM is not set -# CONFIG_SND_VIRTUOSO is not set -# CONFIG_SND_VX222 is not set -# CONFIG_SND_YMFPCI is not set -CONFIG_SND_PPC=y -CONFIG_SND_USB=y -# CONFIG_SND_USB_AUDIO is not set -# CONFIG_SND_USB_USX2Y is not set -# CONFIG_SND_USB_CAIAQ is not set -# CONFIG_SND_SOC is not set -# CONFIG_SOUND_PRIME is not set -CONFIG_AC97_BUS=y -CONFIG_HID_SUPPORT=y -CONFIG_HID=y -# CONFIG_HID_DEBUG is not set -# CONFIG_HIDRAW is not set - -# -# USB Input Devices -# -CONFIG_USB_HID=y -# CONFIG_HID_PID is not set -# CONFIG_USB_HIDDEV is not set - -# -# Special HID drivers -# -CONFIG_HID_COMPAT=y -CONFIG_HID_A4TECH=y -CONFIG_HID_APPLE=y -CONFIG_HID_BELKIN=y -CONFIG_HID_CHERRY=y -CONFIG_HID_CHICONY=y -CONFIG_HID_CYPRESS=y -CONFIG_HID_EZKEY=y -CONFIG_HID_GYRATION=y -CONFIG_HID_LOGITECH=y -# CONFIG_LOGITECH_FF is not set -# CONFIG_LOGIRUMBLEPAD2_FF is not set -CONFIG_HID_MICROSOFT=y -CONFIG_HID_MONTEREY=y -# CONFIG_HID_NTRIG is not set -CONFIG_HID_PANTHERLORD=y -# CONFIG_PANTHERLORD_FF is not set -CONFIG_HID_PETALYNX=y -CONFIG_HID_SAMSUNG=y -CONFIG_HID_SONY=y -CONFIG_HID_SUNPLUS=y -# CONFIG_GREENASIA_FF is not set -# CONFIG_HID_TOPSEED is not set -CONFIG_THRUSTMASTER_FF=m -CONFIG_ZEROPLUS_FF=m -CONFIG_USB_SUPPORT=y -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -CONFIG_USB_ARCH_HAS_EHCI=y -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set -# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set - -# -# Miscellaneous USB options -# -CONFIG_USB_DEVICEFS=y -CONFIG_USB_DEVICE_CLASS=y -# CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_OTG is not set -# CONFIG_USB_OTG_WHITELIST is not set -# CONFIG_USB_OTG_BLACKLIST_HUB is not set -CONFIG_USB_MON=y -# CONFIG_USB_WUSB is not set -# CONFIG_USB_WUSB_CBAF is not set - -# -# USB Host Controller Drivers -# -# CONFIG_USB_C67X00_HCD is not set -CONFIG_USB_EHCI_HCD=y -# CONFIG_USB_EHCI_ROOT_HUB_TT is not set -# CONFIG_USB_EHCI_TT_NEWSCHED is not set -# CONFIG_USB_EHCI_FSL is not set -CONFIG_USB_EHCI_HCD_PPC_OF=y -# CONFIG_USB_OXU210HP_HCD is not set -# CONFIG_USB_ISP116X_HCD is not set -# CONFIG_USB_ISP1760_HCD is not set -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_OHCI_HCD_PPC_OF=y -CONFIG_USB_OHCI_HCD_PPC_OF_BE=y -CONFIG_USB_OHCI_HCD_PPC_OF_LE=y -CONFIG_USB_OHCI_HCD_PCI=y -CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y -CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y -CONFIG_USB_OHCI_LITTLE_ENDIAN=y -# CONFIG_USB_UHCI_HCD is not set -# CONFIG_USB_SL811_HCD is not set -# CONFIG_USB_R8A66597_HCD is not set -# CONFIG_USB_WHCI_HCD is not set -# CONFIG_USB_HWA_HCD is not set - -# -# USB Device Class drivers -# -# CONFIG_USB_ACM is not set -# CONFIG_USB_PRINTER is not set -# CONFIG_USB_WDM is not set -# CONFIG_USB_TMC is not set - -# -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; -# - -# -# see USB_STORAGE Help for more information -# -CONFIG_USB_STORAGE=y -# CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_USBAT is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set -# CONFIG_USB_STORAGE_ALAUDA is not set -# CONFIG_USB_STORAGE_ONETOUCH is not set -# CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set -# CONFIG_USB_LIBUSUAL is not set - -# -# USB Imaging devices -# -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_MICROTEK is not set - -# -# USB port drivers -# -# CONFIG_USB_SERIAL is not set - -# -# USB Miscellaneous drivers -# -# CONFIG_USB_EMI62 is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_ADUTUX is not set -# CONFIG_USB_SEVSEG is not set -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_LEGOTOWER is not set -# CONFIG_USB_LCD is not set -# CONFIG_USB_BERRY_CHARGE is not set -# CONFIG_USB_LED is not set -# CONFIG_USB_CYPRESS_CY7C63 is not set -# CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set -# CONFIG_USB_IDMOUSE is not set -# CONFIG_USB_FTDI_ELAN is not set -# CONFIG_USB_APPLEDISPLAY is not set -# CONFIG_USB_SISUSBVGA is not set -# CONFIG_USB_LD is not set -# CONFIG_USB_TRANCEVIBRATOR is not set -# CONFIG_USB_IOWARRIOR is not set -# CONFIG_USB_TEST is not set -# CONFIG_USB_ISIGHTFW is not set -# CONFIG_USB_VST is not set -# CONFIG_USB_GADGET is not set - -# -# OTG and related infrastructure -# -# CONFIG_UWB is not set -# CONFIG_MMC is not set -# CONFIG_MEMSTICK is not set -# CONFIG_NEW_LEDS is not set -# CONFIG_ACCESSIBILITY is not set -# CONFIG_INFINIBAND is not set -# CONFIG_EDAC is not set -CONFIG_RTC_LIB=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_HCTOSYS=y -CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -# CONFIG_RTC_DEBUG is not set - -# -# RTC interfaces -# -CONFIG_RTC_INTF_SYSFS=y -CONFIG_RTC_INTF_PROC=y -CONFIG_RTC_INTF_DEV=y -# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set -# CONFIG_RTC_DRV_TEST is not set - -# -# I2C RTC drivers -# -# CONFIG_RTC_DRV_DS1307 is not set -# CONFIG_RTC_DRV_DS1374 is not set -# CONFIG_RTC_DRV_DS1672 is not set -# CONFIG_RTC_DRV_MAX6900 is not set -# CONFIG_RTC_DRV_RS5C372 is not set -# CONFIG_RTC_DRV_ISL1208 is not set -# CONFIG_RTC_DRV_X1205 is not set -# CONFIG_RTC_DRV_PCF8563 is not set -# CONFIG_RTC_DRV_PCF8583 is not set -# CONFIG_RTC_DRV_M41T80 is not set -# CONFIG_RTC_DRV_S35390A is not set -# CONFIG_RTC_DRV_FM3130 is not set -# CONFIG_RTC_DRV_RX8581 is not set - -# -# SPI RTC drivers -# - -# -# Platform RTC drivers -# -CONFIG_RTC_DRV_CMOS=y -# CONFIG_RTC_DRV_DS1286 is not set -# CONFIG_RTC_DRV_DS1511 is not set -# CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_DS1742 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set -# CONFIG_RTC_DRV_M48T86 is not set -# CONFIG_RTC_DRV_M48T35 is not set -# CONFIG_RTC_DRV_M48T59 is not set -# CONFIG_RTC_DRV_BQ4802 is not set -# CONFIG_RTC_DRV_V3020 is not set - -# -# on-CPU RTC drivers -# -# CONFIG_RTC_DRV_PPC is not set -CONFIG_DMADEVICES=y - -# -# DMA Devices -# -CONFIG_FSL_DMA=y -CONFIG_DMA_ENGINE=y - -# -# DMA Clients -# -# CONFIG_NET_DMA is not set -# CONFIG_DMATEST is not set -# CONFIG_UIO is not set -# CONFIG_STAGING is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4_FS is not set -CONFIG_JBD=y -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y -# CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_BTRFS_FS is not set -CONFIG_DNOTIFY=y -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=m -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_UDF_FS=m -CONFIG_UDF_NLS=y - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=y -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=y -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -CONFIG_NTFS_FS=y -# CONFIG_NTFS_DEBUG is not set -# CONFIG_NTFS_RW is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_PROC_SYSCTL=y -CONFIG_PROC_PAGE_MONITOR=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -# CONFIG_CONFIGFS_FS is not set -CONFIG_MISC_FILESYSTEMS=y -CONFIG_ADFS_FS=m -# CONFIG_ADFS_FS_RW is not set -CONFIG_AFFS_FS=m -CONFIG_HFS_FS=m -CONFIG_HFSPLUS_FS=m -CONFIG_BEFS_FS=m -# CONFIG_BEFS_DEBUG is not set -CONFIG_BFS_FS=m -CONFIG_EFS_FS=m -CONFIG_CRAMFS=y -# CONFIG_SQUASHFS is not set -CONFIG_VXFS_FS=m -# CONFIG_MINIX_FS is not set -# CONFIG_OMFS_FS is not set -CONFIG_HPFS_FS=m -CONFIG_QNX4FS_FS=m -# CONFIG_ROMFS_FS is not set -CONFIG_SYSV_FS=m -CONFIG_UFS_FS=m -# CONFIG_UFS_FS_WRITE is not set -# CONFIG_UFS_DEBUG is not set -CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_NFSD=y -# CONFIG_NFSD_V3 is not set -# CONFIG_NFSD_V4 is not set -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set -CONFIG_RPCSEC_GSS_KRB5=y -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -CONFIG_MAC_PARTITION=y -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_KARMA_PARTITION is not set -# CONFIG_EFI_PARTITION is not set -# CONFIG_SYSV68_PARTITION is not set -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -# CONFIG_NLS_CODEPAGE_437 is not set -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set -# CONFIG_NLS_ISO8859_1 is not set -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -CONFIG_NLS_UTF8=m -# CONFIG_DLM is not set - -# -# Library routines -# -CONFIG_BITREVERSE=y -CONFIG_GENERIC_FIND_LAST_BIT=y -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -CONFIG_CRC_T10DIF=y -CONFIG_CRC_ITU_T=m -CONFIG_CRC32=y -# CONFIG_CRC7 is not set -CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=y -CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y -CONFIG_HAVE_LMB=y - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_WARN_DEPRECATED=y -CONFIG_ENABLE_MUST_CHECK=y -CONFIG_FRAME_WARN=1024 -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_SHIRQ is not set -CONFIG_DETECT_SOFTLOCKUP=y -# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set -CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 -CONFIG_SCHED_DEBUG=y -# CONFIG_SCHEDSTATS is not set -# CONFIG_TIMER_STATS is not set -# CONFIG_DEBUG_OBJECTS is not set -# CONFIG_SLUB_DEBUG_ON is not set -# CONFIG_SLUB_STATS is not set -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_RT_MUTEX_TESTER is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -# CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_HIGHMEM is not set -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_DEBUG_INFO=y -# CONFIG_DEBUG_VM is not set -# CONFIG_DEBUG_WRITECOUNT is not set -# CONFIG_DEBUG_MEMORY_INIT is not set -# CONFIG_DEBUG_LIST is not set -# CONFIG_DEBUG_SG is not set -# CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set -# CONFIG_RCU_TORTURE_TEST is not set -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -# CONFIG_BACKTRACE_SELF_TEST is not set -# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set -# CONFIG_FAULT_INJECTION is not set -# CONFIG_LATENCYTOP is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set -# CONFIG_SAMPLES is not set -CONFIG_HAVE_ARCH_KGDB=y -# CONFIG_KGDB is not set -CONFIG_PRINT_STACK_DEPTH=64 -# CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_CODE_PATCHING_SELFTEST is not set -# CONFIG_FTR_FIXUP_SELFTEST is not set -# CONFIG_MSI_BITMAP_SELFTEST is not set -# CONFIG_XMON is not set -# CONFIG_IRQSTACKS is not set -# CONFIG_BDI_SWITCH is not set -# CONFIG_PPC_EARLY_DEBUG is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -# CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set -CONFIG_CRYPTO=y - -# -# Crypto core or helper -# -# CONFIG_CRYPTO_FIPS is not set -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_ALGAPI2=y -CONFIG_CRYPTO_AEAD=y -CONFIG_CRYPTO_AEAD2=y -CONFIG_CRYPTO_BLKCIPHER=y -CONFIG_CRYPTO_BLKCIPHER2=y -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_HASH2=y -CONFIG_CRYPTO_RNG2=y -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_MANAGER2=y -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_NULL is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_AUTHENC=y -# CONFIG_CRYPTO_TEST is not set - -# -# Authenticated Encryption with Associated Data -# -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_SEQIV is not set - -# -# Block modes -# -CONFIG_CRYPTO_CBC=y -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_CTS is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_LRW is not set -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_XTS is not set - -# -# Hash modes -# -CONFIG_CRYPTO_HMAC=y -# CONFIG_CRYPTO_XCBC is not set - -# -# Digest -# -CONFIG_CRYPTO_CRC32C=m -# CONFIG_CRYPTO_MD4 is not set -CONFIG_CRYPTO_MD5=y -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_RMD128 is not set -# CONFIG_CRYPTO_RMD160 is not set -# CONFIG_CRYPTO_RMD256 is not set -# CONFIG_CRYPTO_RMD320 is not set -CONFIG_CRYPTO_SHA1=m -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_WP512 is not set - -# -# Ciphers -# -# CONFIG_CRYPTO_AES is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_ARC4 is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_CAST5 is not set -# CONFIG_CRYPTO_CAST6 is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_SALSA20 is not set -# CONFIG_CRYPTO_SEED is not set -# CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_TWOFISH is not set - -# -# Compression -# -# CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_LZO is not set - -# -# Random Number Generation -# -# CONFIG_CRYPTO_ANSI_CPRNG is not set -CONFIG_CRYPTO_HW=y -# CONFIG_CRYPTO_DEV_HIFN_795X is not set -CONFIG_CRYPTO_DEV_TALITOS=y -# CONFIG_PPC_CLOCK is not set -# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/85xx/mpc8568mds_defconfig b/arch/powerpc/configs/85xx/mpc8568mds_defconfig deleted file mode 100644 index 186c1010a13..00000000000 --- a/arch/powerpc/configs/85xx/mpc8568mds_defconfig +++ /dev/null @@ -1,1309 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:36:10 2009 -# -# CONFIG_PPC64 is not set - -# -# Processor support -# -# CONFIG_6xx is not set -CONFIG_PPC_85xx=y -# CONFIG_PPC_8xx is not set -# CONFIG_40x is not set -# CONFIG_44x is not set -# CONFIG_E200 is not set -CONFIG_E500=y -# CONFIG_PPC_E500MC is not set -CONFIG_BOOKE=y -CONFIG_FSL_BOOKE=y -CONFIG_FSL_EMB_PERFMON=y -# CONFIG_PHYS_64BIT is not set -CONFIG_SPE=y -CONFIG_PPC_MMU_NOHASH=y -# CONFIG_PPC_MM_SLICES is not set -# CONFIG_SMP is not set -CONFIG_PPC32=y -CONFIG_WORD_SIZE=32 -# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set -CONFIG_MMU=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_GENERIC_TIME=y -CONFIG_GENERIC_TIME_VSYSCALL=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_HARDIRQS=y -# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set -CONFIG_IRQ_PER_CPU=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_HAVE_LATENCYTOP_SUPPORT=y -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_ARCH_HAS_ILOG2_U32=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_FIND_NEXT_BIT=y -# CONFIG_ARCH_NO_VIRT_TO_BUS is not set -CONFIG_PPC=y -CONFIG_EARLY_PRINTK=y -CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_OMIT_FRAME_POINTER=y -CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_PPC_OF=y -CONFIG_OF=y -CONFIG_PPC_UDBG_16550=y -# CONFIG_GENERIC_TBSYNC is not set -CONFIG_AUDIT_ARCH=y -CONFIG_GENERIC_BUG=y -CONFIG_DEFAULT_UIMAGE=y -# CONFIG_PPC_DCR_NATIVE is not set -# CONFIG_PPC_DCR_MMIO is not set -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# General setup -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_GROUP_SCHED=y -# CONFIG_FAIR_GROUP_SCHED is not set -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set -# CONFIG_CGROUPS is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y -# CONFIG_RELAY is not set -# CONFIG_NAMESPACES is not set -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_SYSCTL_SYSCALL=y -# CONFIG_KALLSYMS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_ANON_INODES=y -# CONFIG_EPOLL is not set -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -CONFIG_AIO=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_PCI_QUIRKS=y -CONFIG_SLUB_DEBUG=y -# CONFIG_SLAB is not set -CONFIG_SLUB=y -# CONFIG_SLOB is not set -# CONFIG_PROFILING is not set -CONFIG_HAVE_OPROFILE=y -CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y -CONFIG_HAVE_IOREMAP_PROT=y -CONFIG_HAVE_KPROBES=y -CONFIG_HAVE_KRETPROBES=y -CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set -CONFIG_SLABINFO=y -CONFIG_RT_MUTEXES=y -CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -# CONFIG_MODULE_FORCE_LOAD is not set -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_BLK_DEV_INTEGRITY is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set -# CONFIG_FREEZER is not set - -# -# Platform support -# -# CONFIG_PPC_CELL is not set -# CONFIG_PPC_CELL_NATIVE is not set -# CONFIG_PQ2ADS is not set -CONFIG_MPC85xx=y -# CONFIG_MPC8540_ADS is not set -# CONFIG_MPC8560_ADS is not set -# CONFIG_MPC85xx_CDS is not set -CONFIG_MPC85xx_MDS=y -# CONFIG_MPC8536_DS is not set -# CONFIG_MPC85xx_DS is not set -# CONFIG_KSI8560 is not set -# CONFIG_STX_GP3 is not set -# CONFIG_TQM8540 is not set -# CONFIG_TQM8541 is not set -# CONFIG_TQM8548 is not set -# CONFIG_TQM8555 is not set -# CONFIG_TQM8560 is not set -# CONFIG_SBC8548 is not set -# CONFIG_SBC8560 is not set -# CONFIG_IPIC is not set -CONFIG_MPIC=y -# CONFIG_MPIC_WEIRD is not set -# CONFIG_PPC_I8259 is not set -# CONFIG_PPC_RTAS is not set -# CONFIG_MMIO_NVRAM is not set -# CONFIG_PPC_MPC106 is not set -# CONFIG_PPC_970_NAP is not set -# CONFIG_PPC_INDIRECT_IO is not set -# CONFIG_GENERIC_IOMAP is not set -# CONFIG_CPU_FREQ is not set -CONFIG_QUICC_ENGINE=y -# CONFIG_QE_GPIO is not set -# CONFIG_CPM2 is not set -# CONFIG_FSL_ULI1575 is not set -# CONFIG_MPC8xxx_GPIO is not set -# CONFIG_SIMPLE_GPIO is not set - -# -# Kernel options -# -# CONFIG_HIGHMEM is not set -CONFIG_TICK_ONESHOT=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_300 is not set -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_SCHED_HRTICK=y -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -CONFIG_BINFMT_ELF=y -# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set -# CONFIG_HAVE_AOUT is not set -# CONFIG_BINFMT_MISC is not set -CONFIG_MATH_EMULATION=y -# CONFIG_IOMMU_HELPER is not set -CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y -CONFIG_ARCH_HAS_WALK_MEMORY=y -CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_ARCH_POPULATES_NODE_MAP=y -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_SPLIT_PTLOCK_CPUS=4 -CONFIG_MIGRATION=y -# CONFIG_PHYS_ADDR_T_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y -CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y -CONFIG_PPC_4K_PAGES=y -# CONFIG_PPC_16K_PAGES is not set -# CONFIG_PPC_64K_PAGES is not set -CONFIG_FORCE_MAX_ZONEORDER=11 -CONFIG_PROC_DEVICETREE=y -# CONFIG_CMDLINE_BOOL is not set -CONFIG_EXTRA_TARGETS="" -# CONFIG_PM is not set -CONFIG_SECCOMP=y -CONFIG_ISA_DMA_API=y - -# -# Bus options -# -CONFIG_ZONE_DMA=y -CONFIG_PPC_INDIRECT_PCI=y -CONFIG_FSL_SOC=y -CONFIG_FSL_PCI=y -CONFIG_PPC_PCI_CHOICE=y -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_SYSCALL=y -# CONFIG_PCIEPORTBUS is not set -CONFIG_ARCH_SUPPORTS_MSI=y -# CONFIG_PCI_MSI is not set -# CONFIG_PCI_LEGACY is not set -# CONFIG_PCI_DEBUG is not set -# CONFIG_PCI_STUB is not set -# CONFIG_PCCARD is not set -# CONFIG_HOTPLUG_PCI is not set -# CONFIG_HAS_RAPIDIO is not set - -# -# Advanced setup -# -# CONFIG_ADVANCED_OPTIONS is not set - -# -# Default settings for advanced configuration options are used -# -CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_PAGE_OFFSET=0xc0000000 -CONFIG_KERNEL_START=0xc0000000 -CONFIG_PHYSICAL_START=0x00000000 -CONFIG_PHYSICAL_ALIGN=0x10000000 -CONFIG_TASK_SIZE=0xc0000000 -CONFIG_NET=y - -# -# Networking options -# -CONFIG_COMPAT_NET_DEV_OPS=y -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set -# CONFIG_XFRM_STATISTICS is not set -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y -# CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -# CONFIG_IPV6 is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set -# CONFIG_IP_DCCP is not set -# CONFIG_IP_SCTP is not set -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_NET_DSA is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set -# CONFIG_DCB is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_CAN is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set -CONFIG_WIRELESS=y -# CONFIG_CFG80211 is not set -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set -# CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set -# CONFIG_WIMAX is not set -# CONFIG_RFKILL is not set -# CONFIG_NET_9P is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set -# CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set -# CONFIG_SYS_HYPERVISOR is not set -# CONFIG_CONNECTOR is not set -# CONFIG_MTD is not set -CONFIG_OF_DEVICE=y -CONFIG_OF_I2C=y -# CONFIG_PARPORT is not set -CONFIG_BLK_DEV=y -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=32768 -# CONFIG_BLK_DEV_XIP is not set -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set -# CONFIG_BLK_DEV_HD is not set -CONFIG_MISC_DEVICES=y -# CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set -# CONFIG_SGI_IOC4 is not set -# CONFIG_TIFM_CORE is not set -# CONFIG_ICS932S401 is not set -# CONFIG_ENCLOSURE_SERVICES is not set -# CONFIG_HP_ILO is not set -# CONFIG_C2PORT is not set -CONFIG_HAVE_IDE=y -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=y -CONFIG_SCSI_DMA=y -# CONFIG_SCSI_TGT is not set -# CONFIG_SCSI_NETLINK is not set -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -# CONFIG_BLK_DEV_SD is not set -# CONFIG_CHR_DEV_ST is not set -# CONFIG_CHR_DEV_OSST is not set -# CONFIG_BLK_DEV_SR is not set -# CONFIG_CHR_DEV_SG is not set -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -# CONFIG_SCSI_MULTI_LUN is not set -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set -# CONFIG_SCSI_SCAN_ASYNC is not set -CONFIG_SCSI_WAIT_SCAN=m - -# -# SCSI Transports -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_LIBSAS is not set -# CONFIG_SCSI_SRP_ATTRS is not set -CONFIG_SCSI_LOWLEVEL=y -# CONFIG_ISCSI_TCP is not set -# CONFIG_SCSI_CXGB3_ISCSI is not set -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_SCSI_AIC94XX is not set -# CONFIG_SCSI_DPT_I2O is not set -# CONFIG_SCSI_ADVANSYS is not set -# CONFIG_SCSI_ARCMSR is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_HPTIOP is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_LIBFC is not set -# CONFIG_FCOE is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set -# CONFIG_SCSI_STEX is not set -# CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -# CONFIG_SCSI_QLA_FC is not set -# CONFIG_SCSI_QLA_ISCSI is not set -# CONFIG_SCSI_LPFC is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_SRP is not set -# CONFIG_SCSI_DH is not set -# CONFIG_ATA is not set -# CONFIG_MD is not set -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# Enable only one of the two stacks, unless you know what you are doing -# -# CONFIG_FIREWIRE is not set -# CONFIG_IEEE1394 is not set -# CONFIG_I2O is not set -# CONFIG_MACINTOSH_DRIVERS is not set -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_MACVLAN is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_VETH is not set -# CONFIG_ARCNET is not set -CONFIG_PHYLIB=y - -# -# MII PHY device drivers -# -CONFIG_MARVELL_PHY=y -# CONFIG_DAVICOM_PHY is not set -# CONFIG_QSEMI_PHY is not set -# CONFIG_LXT_PHY is not set -# CONFIG_CICADA_PHY is not set -# CONFIG_VITESSE_PHY is not set -# CONFIG_SMSC_PHY is not set -# CONFIG_BROADCOM_PHY is not set -# CONFIG_ICPLUS_PHY is not set -# CONFIG_REALTEK_PHY is not set -# CONFIG_NATIONAL_PHY is not set -# CONFIG_STE10XP is not set -# CONFIG_LSI_ET1011C_PHY is not set -# CONFIG_FIXED_PHY is not set -# CONFIG_MDIO_BITBANG is not set -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -# CONFIG_NET_VENDOR_3COM is not set -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -# CONFIG_IBM_NEW_EMAC_ZMII is not set -# CONFIG_IBM_NEW_EMAC_RGMII is not set -# CONFIG_IBM_NEW_EMAC_TAH is not set -# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set -# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set -# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set -# CONFIG_NET_PCI is not set -# CONFIG_B44 is not set -# CONFIG_ATL2 is not set -CONFIG_NETDEV_1000=y -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_E1000E is not set -# CONFIG_IP1000 is not set -# CONFIG_IGB is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SKY2 is not set -# CONFIG_VIA_VELOCITY is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set -CONFIG_GIANFAR=y -# CONFIG_UCC_GETH is not set -# CONFIG_QLA3XXX is not set -# CONFIG_ATL1 is not set -# CONFIG_ATL1E is not set -# CONFIG_JME is not set -CONFIG_NETDEV_10000=y -# CONFIG_CHELSIO_T1 is not set -CONFIG_CHELSIO_T3_DEPENDS=y -# CONFIG_CHELSIO_T3 is not set -# CONFIG_ENIC is not set -# CONFIG_IXGBE is not set -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set -# CONFIG_MYRI10GE is not set -# CONFIG_NETXEN_NIC is not set -# CONFIG_NIU is not set -# CONFIG_MLX4_EN is not set -# CONFIG_MLX4_CORE is not set -# CONFIG_TEHUTI is not set -# CONFIG_BNX2X is not set -# CONFIG_QLGE is not set -# CONFIG_SFC is not set -# CONFIG_TR is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set - -# -# Enable WiMAX (Networking options) to see the WiMAX drivers -# -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_NET_FC is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_ISDN is not set -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_VT is not set -CONFIG_DEVKMEM=y -# CONFIG_SERIAL_NONSTANDARD is not set -# CONFIG_NOZOMI is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_PCI=y -CONFIG_SERIAL_8250_NR_UARTS=4 -CONFIG_SERIAL_8250_RUNTIME_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set -CONFIG_SERIAL_8250_SHARE_IRQ=y - -# -# Non-8250 serial port support -# -# CONFIG_SERIAL_UARTLITE is not set -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set -# CONFIG_SERIAL_OF_PLATFORM is not set -# CONFIG_SERIAL_QE is not set -CONFIG_UNIX98_PTYS=y -# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_HVC_UDBG is not set -# CONFIG_IPMI_HANDLER is not set -CONFIG_HW_RANDOM=y -# CONFIG_NVRAM is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_TCG_TPM is not set -CONFIG_DEVPORT=y -CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_HELPER_AUTO=y - -# -# I2C Hardware Bus support -# - -# -# PC SMBus host controller drivers -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_ISCH is not set -# CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set - -# -# I2C system bus drivers (mostly embedded / system-on-chip) -# -CONFIG_I2C_MPC=y -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_SIMTEC is not set - -# -# External I2C/SMBus adapter drivers -# -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_TAOS_EVM is not set - -# -# Graphics adapter I2C/DDC channel drivers -# -# CONFIG_I2C_VOODOO3 is not set - -# -# Other I2C/SMBus bus drivers -# -# CONFIG_I2C_PCA_PLATFORM is not set -# CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_SENSORS_TSL2550 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set -# CONFIG_SPI is not set -CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y -# CONFIG_GPIOLIB is not set -# CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set -CONFIG_HWMON=y -# CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_AD7414 is not set -# CONFIG_SENSORS_AD7418 is not set -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1029 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ADT7462 is not set -# CONFIG_SENSORS_ADT7470 is not set -# CONFIG_SENSORS_ADT7473 is not set -# CONFIG_SENSORS_ADT7475 is not set -# CONFIG_SENSORS_ATXP1 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_I5K_AMB is not set -# CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_F71882FG is not set -# CONFIG_SENSORS_F75375S is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_GL520SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM63 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_LM92 is not set -# CONFIG_SENSORS_LM93 is not set -# CONFIG_SENSORS_LTC4245 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_MAX6650 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_PC87427 is not set -# CONFIG_SENSORS_SIS5595 is not set -# CONFIG_SENSORS_DME1737 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_SMSC47M192 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_ADS7828 is not set -# CONFIG_SENSORS_THMC50 is not set -# CONFIG_SENSORS_VIA686A is not set -# CONFIG_SENSORS_VT1211 is not set -# CONFIG_SENSORS_VT8231 is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83791D is not set -# CONFIG_SENSORS_W83792D is not set -# CONFIG_SENSORS_W83793 is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83L786NG is not set -# CONFIG_SENSORS_W83627HF is not set -# CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set -# CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set -CONFIG_WATCHDOG=y -# CONFIG_WATCHDOG_NOWAYOUT is not set - -# -# Watchdog Device Drivers -# -# CONFIG_SOFT_WATCHDOG is not set -# CONFIG_ALIM7101_WDT is not set -# CONFIG_BOOKE_WDT is not set - -# -# PCI-based Watchdog Cards -# -# CONFIG_PCIPCWATCHDOG is not set -# CONFIG_WDTPCI is not set -CONFIG_SSB_POSSIBLE=y - -# -# Sonics Silicon Backplane -# -# CONFIG_SSB is not set - -# -# Multifunction device drivers -# -# CONFIG_MFD_CORE is not set -# CONFIG_MFD_SM501 is not set -# CONFIG_HTC_PASIC3 is not set -# CONFIG_TWL4030_CORE is not set -# CONFIG_MFD_TMIO is not set -# CONFIG_PMIC_DA903X is not set -# CONFIG_MFD_WM8400 is not set -# CONFIG_MFD_WM8350_I2C is not set -# CONFIG_MFD_PCF50633 is not set -# CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y - -# -# Graphics support -# -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_VGASTATE is not set -CONFIG_VIDEO_OUTPUT_CONTROL=m -# CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_SOUND is not set -CONFIG_HID_SUPPORT=y -CONFIG_HID=y -# CONFIG_HID_DEBUG is not set -# CONFIG_HIDRAW is not set -# CONFIG_HID_PID is not set - -# -# Special HID drivers -# -CONFIG_HID_COMPAT=y -CONFIG_USB_SUPPORT=y -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -CONFIG_USB_ARCH_HAS_EHCI=y -# CONFIG_USB is not set -# CONFIG_USB_OTG_WHITELIST is not set -# CONFIG_USB_OTG_BLACKLIST_HUB is not set - -# -# Enable Host or Gadget support to see Inventra options -# - -# -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; -# -# CONFIG_USB_GADGET is not set - -# -# OTG and related infrastructure -# -# CONFIG_UWB is not set -# CONFIG_MMC is not set -# CONFIG_MEMSTICK is not set -# CONFIG_NEW_LEDS is not set -# CONFIG_ACCESSIBILITY is not set -# CONFIG_INFINIBAND is not set -# CONFIG_EDAC is not set -CONFIG_RTC_LIB=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_HCTOSYS=y -CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -# CONFIG_RTC_DEBUG is not set - -# -# RTC interfaces -# -CONFIG_RTC_INTF_SYSFS=y -CONFIG_RTC_INTF_PROC=y -CONFIG_RTC_INTF_DEV=y -# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set -# CONFIG_RTC_DRV_TEST is not set - -# -# I2C RTC drivers -# -# CONFIG_RTC_DRV_DS1307 is not set -CONFIG_RTC_DRV_DS1374=y -# CONFIG_RTC_DRV_DS1672 is not set -# CONFIG_RTC_DRV_MAX6900 is not set -# CONFIG_RTC_DRV_RS5C372 is not set -# CONFIG_RTC_DRV_ISL1208 is not set -# CONFIG_RTC_DRV_X1205 is not set -# CONFIG_RTC_DRV_PCF8563 is not set -# CONFIG_RTC_DRV_PCF8583 is not set -# CONFIG_RTC_DRV_M41T80 is not set -# CONFIG_RTC_DRV_S35390A is not set -# CONFIG_RTC_DRV_FM3130 is not set -# CONFIG_RTC_DRV_RX8581 is not set - -# -# SPI RTC drivers -# - -# -# Platform RTC drivers -# -# CONFIG_RTC_DRV_CMOS is not set -# CONFIG_RTC_DRV_DS1286 is not set -# CONFIG_RTC_DRV_DS1511 is not set -# CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_DS1742 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set -# CONFIG_RTC_DRV_M48T86 is not set -# CONFIG_RTC_DRV_M48T35 is not set -# CONFIG_RTC_DRV_M48T59 is not set -# CONFIG_RTC_DRV_BQ4802 is not set -# CONFIG_RTC_DRV_V3020 is not set - -# -# on-CPU RTC drivers -# -# CONFIG_RTC_DRV_PPC is not set -# CONFIG_DMADEVICES is not set -# CONFIG_UIO is not set -# CONFIG_STAGING is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4_FS is not set -CONFIG_JBD=y -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y -# CONFIG_XFS_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_BTRFS_FS is not set -CONFIG_DNOTIFY=y -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_PROC_SYSCTL=y -CONFIG_PROC_PAGE_MONITOR=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -# CONFIG_CONFIGFS_FS is not set -CONFIG_MISC_FILESYSTEMS=y -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_SQUASHFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_OMFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set -CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -# CONFIG_NFSD is not set -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set -CONFIG_RPCSEC_GSS_KRB5=y -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -# CONFIG_MSDOS_PARTITION is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_KARMA_PARTITION is not set -# CONFIG_EFI_PARTITION is not set -# CONFIG_SYSV68_PARTITION is not set -# CONFIG_NLS is not set -# CONFIG_DLM is not set - -# -# Library routines -# -CONFIG_BITREVERSE=y -CONFIG_GENERIC_FIND_LAST_BIT=y -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -# CONFIG_CRC_T10DIF is not set -# CONFIG_CRC_ITU_T is not set -CONFIG_CRC32=y -# CONFIG_CRC7 is not set -# CONFIG_LIBCRC32C is not set -CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y -CONFIG_HAVE_LMB=y - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_WARN_DEPRECATED=y -CONFIG_ENABLE_MUST_CHECK=y -CONFIG_FRAME_WARN=1024 -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_SHIRQ is not set -CONFIG_DETECT_SOFTLOCKUP=y -# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set -CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 -CONFIG_SCHED_DEBUG=y -# CONFIG_SCHEDSTATS is not set -# CONFIG_TIMER_STATS is not set -# CONFIG_DEBUG_OBJECTS is not set -# CONFIG_SLUB_DEBUG_ON is not set -# CONFIG_SLUB_STATS is not set -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_RT_MUTEX_TESTER is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -# CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_VM is not set -# CONFIG_DEBUG_WRITECOUNT is not set -# CONFIG_DEBUG_MEMORY_INIT is not set -# CONFIG_DEBUG_LIST is not set -# CONFIG_DEBUG_SG is not set -# CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set -# CONFIG_RCU_TORTURE_TEST is not set -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -# CONFIG_BACKTRACE_SELF_TEST is not set -# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set -# CONFIG_FAULT_INJECTION is not set -# CONFIG_LATENCYTOP is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set -# CONFIG_SAMPLES is not set -CONFIG_HAVE_ARCH_KGDB=y -# CONFIG_KGDB is not set -CONFIG_PRINT_STACK_DEPTH=64 -# CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_CODE_PATCHING_SELFTEST is not set -# CONFIG_FTR_FIXUP_SELFTEST is not set -# CONFIG_MSI_BITMAP_SELFTEST is not set -# CONFIG_XMON is not set -# CONFIG_IRQSTACKS is not set -# CONFIG_BDI_SWITCH is not set -CONFIG_PPC_EARLY_DEBUG=y -# CONFIG_PPC_EARLY_DEBUG_LPAR is not set -# CONFIG_PPC_EARLY_DEBUG_G5 is not set -# CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL is not set -# CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set -# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set -# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set -# CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set -# CONFIG_PPC_EARLY_DEBUG_BEAT is not set -# CONFIG_PPC_EARLY_DEBUG_44x is not set -# CONFIG_PPC_EARLY_DEBUG_40x is not set -# CONFIG_PPC_EARLY_DEBUG_CPM is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -# CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set -CONFIG_CRYPTO=y - -# -# Crypto core or helper -# -# CONFIG_CRYPTO_FIPS is not set -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_ALGAPI2=y -CONFIG_CRYPTO_AEAD2=y -CONFIG_CRYPTO_BLKCIPHER=y -CONFIG_CRYPTO_BLKCIPHER2=y -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_HASH2=y -CONFIG_CRYPTO_RNG2=y -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_MANAGER2=y -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_NULL is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_AUTHENC is not set -# CONFIG_CRYPTO_TEST is not set - -# -# Authenticated Encryption with Associated Data -# -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_SEQIV is not set - -# -# Block modes -# -CONFIG_CRYPTO_CBC=y -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_CTS is not set -CONFIG_CRYPTO_ECB=m -# CONFIG_CRYPTO_LRW is not set -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_XTS is not set - -# -# Hash modes -# -# CONFIG_CRYPTO_HMAC is not set -# CONFIG_CRYPTO_XCBC is not set - -# -# Digest -# -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_MD4 is not set -CONFIG_CRYPTO_MD5=y -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_RMD128 is not set -# CONFIG_CRYPTO_RMD160 is not set -# CONFIG_CRYPTO_RMD256 is not set -# CONFIG_CRYPTO_RMD320 is not set -# CONFIG_CRYPTO_SHA1 is not set -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_WP512 is not set - -# -# Ciphers -# -# CONFIG_CRYPTO_AES is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_ARC4 is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_CAST5 is not set -# CONFIG_CRYPTO_CAST6 is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_SALSA20 is not set -# CONFIG_CRYPTO_SEED is not set -# CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_TWOFISH is not set - -# -# Compression -# -# CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_LZO is not set - -# -# Random Number Generation -# -# CONFIG_CRYPTO_ANSI_CPRNG is not set -CONFIG_CRYPTO_HW=y -# CONFIG_CRYPTO_DEV_HIFN_795X is not set -# CONFIG_CRYPTO_DEV_TALITOS is not set -# CONFIG_PPC_CLOCK is not set -CONFIG_PPC_LIB_RHEAP=y -# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/85xx/mpc8572_ds_defconfig b/arch/powerpc/configs/85xx/mpc8572_ds_defconfig deleted file mode 100644 index 813223ae174..00000000000 --- a/arch/powerpc/configs/85xx/mpc8572_ds_defconfig +++ /dev/null @@ -1,1794 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc2 -# Mon Jan 26 15:36:12 2009 -# -# CONFIG_PPC64 is not set - -# -# Processor support -# -# CONFIG_6xx is not set -CONFIG_PPC_85xx=y -# CONFIG_PPC_8xx is not set -# CONFIG_40x is not set -# CONFIG_44x is not set -# CONFIG_E200 is not set -CONFIG_E500=y -# CONFIG_PPC_E500MC is not set -CONFIG_BOOKE=y -CONFIG_FSL_BOOKE=y -CONFIG_FSL_EMB_PERFMON=y -# CONFIG_PHYS_64BIT is not set -CONFIG_SPE=y -CONFIG_PPC_MMU_NOHASH=y -# CONFIG_PPC_MM_SLICES is not set -CONFIG_SMP=y -CONFIG_NR_CPUS=2 -CONFIG_PPC32=y -CONFIG_WORD_SIZE=32 -# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set -CONFIG_MMU=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_GENERIC_TIME=y -CONFIG_GENERIC_TIME_VSYSCALL=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_HARDIRQS=y -# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set -CONFIG_IRQ_PER_CPU=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_HAVE_LATENCYTOP_SUPPORT=y -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_ARCH_HAS_ILOG2_U32=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_FIND_NEXT_BIT=y -# CONFIG_ARCH_NO_VIRT_TO_BUS is not set -CONFIG_PPC=y -CONFIG_EARLY_PRINTK=y -CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_OMIT_FRAME_POINTER=y -CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_PPC_OF=y -CONFIG_OF=y -CONFIG_PPC_UDBG_16550=y -CONFIG_GENERIC_TBSYNC=y -CONFIG_AUDIT_ARCH=y -CONFIG_GENERIC_BUG=y -CONFIG_DEFAULT_UIMAGE=y -# CONFIG_PPC_DCR_NATIVE is not set -# CONFIG_PPC_DCR_MMIO is not set -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# General setup -# -CONFIG_EXPERIMENTAL=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -CONFIG_POSIX_MQUEUE=y -CONFIG_BSD_PROCESS_ACCT=y -# CONFIG_BSD_PROCESS_ACCT_V3 is not set -# CONFIG_TASKSTATS is not set -CONFIG_AUDIT=y -# CONFIG_AUDITSYSCALL is not set -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_GROUP_SCHED=y -# CONFIG_FAIR_GROUP_SCHED is not set -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set -# CONFIG_CGROUPS is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y -# CONFIG_RELAY is not set -# CONFIG_NAMESPACES is not set -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_KALLSYMS=y -CONFIG_KALLSYMS_ALL=y -CONFIG_KALLSYMS_STRIP_GENERATED=y -CONFIG_KALLSYMS_EXTRA_PASS=y -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_ANON_INODES=y -CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -CONFIG_AIO=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_PCI_QUIRKS=y -CONFIG_SLUB_DEBUG=y -# CONFIG_SLAB is not set -CONFIG_SLUB=y -# CONFIG_SLOB is not set -# CONFIG_PROFILING is not set -CONFIG_HAVE_OPROFILE=y -# CONFIG_KPROBES is not set -CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y -CONFIG_HAVE_IOREMAP_PROT=y -CONFIG_HAVE_KPROBES=y -CONFIG_HAVE_KRETPROBES=y -CONFIG_HAVE_ARCH_TRACEHOOK=y -CONFIG_USE_GENERIC_SMP_HELPERS=y -# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set -CONFIG_SLABINFO=y -CONFIG_RT_MUTEXES=y -CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -# CONFIG_MODULE_FORCE_LOAD is not set -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MODVERSIONS=y -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_STOP_MACHINE=y -CONFIG_BLOCK=y -CONFIG_LBD=y -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_BLK_DEV_INTEGRITY is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set -# CONFIG_DEFAULT_DEADLINE is not set -CONFIG_DEFAULT_CFQ=y -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set -# CONFIG_FREEZER is not set - -# -# Platform support -# -# CONFIG_PPC_CELL is not set -# CONFIG_PPC_CELL_NATIVE is not set -# CONFIG_PQ2ADS is not set -CONFIG_MPC85xx=y -# CONFIG_MPC8540_ADS is not set -# CONFIG_MPC8560_ADS is not set -# CONFIG_MPC85xx_CDS is not set -# CONFIG_MPC85xx_MDS is not set -# CONFIG_MPC8536_DS is not set -CONFIG_MPC85xx_DS=y -# CONFIG_KSI8560 is not set -# CONFIG_STX_GP3 is not set -# CONFIG_TQM8540 is not set -# CONFIG_TQM8541 is not set -# CONFIG_TQM8548 is not set -# CONFIG_TQM8555 is not set -# CONFIG_TQM8560 is not set -# CONFIG_SBC8548 is not set -# CONFIG_SBC8560 is not set -# CONFIG_IPIC is not set -CONFIG_MPIC=y -# CONFIG_MPIC_WEIRD is not set -CONFIG_PPC_I8259=y -# CONFIG_PPC_RTAS is not set -# CONFIG_MMIO_NVRAM is not set -# CONFIG_PPC_MPC106 is not set -# CONFIG_PPC_970_NAP is not set -# CONFIG_PPC_INDIRECT_IO is not set -# CONFIG_GENERIC_IOMAP is not set -# CONFIG_CPU_FREQ is not set -# CONFIG_QUICC_ENGINE is not set -# CONFIG_CPM2 is not set -CONFIG_FSL_ULI1575=y -# CONFIG_MPC8xxx_GPIO is not set -# CONFIG_SIMPLE_GPIO is not set - -# -# Kernel options -# -CONFIG_HIGHMEM=y -CONFIG_TICK_ONESHOT=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_300 is not set -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_SCHED_HRTICK=y -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -CONFIG_BINFMT_ELF=y -# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set -# CONFIG_HAVE_AOUT is not set -CONFIG_BINFMT_MISC=m -CONFIG_MATH_EMULATION=y -# CONFIG_IOMMU_HELPER is not set -CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y -CONFIG_ARCH_HAS_WALK_MEMORY=y -CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y -# CONFIG_IRQ_ALL_CPUS is not set -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_ARCH_POPULATES_NODE_MAP=y -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_SPLIT_PTLOCK_CPUS=4 -CONFIG_MIGRATION=y -# CONFIG_PHYS_ADDR_T_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y -CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y -CONFIG_PPC_4K_PAGES=y -# CONFIG_PPC_16K_PAGES is not set -# CONFIG_PPC_64K_PAGES is not set -CONFIG_FORCE_MAX_ZONEORDER=11 -CONFIG_PROC_DEVICETREE=y -# CONFIG_CMDLINE_BOOL is not set -CONFIG_EXTRA_TARGETS="" -# CONFIG_PM is not set -CONFIG_SECCOMP=y -CONFIG_ISA_DMA_API=y - -# -# Bus options -# -CONFIG_ZONE_DMA=y -CONFIG_GENERIC_ISA_DMA=y -CONFIG_PPC_INDIRECT_PCI=y -CONFIG_FSL_SOC=y -CONFIG_FSL_PCI=y -CONFIG_PPC_PCI_CHOICE=y -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_SYSCALL=y -# CONFIG_PCIEPORTBUS is not set -CONFIG_ARCH_SUPPORTS_MSI=y -# CONFIG_PCI_MSI is not set -# CONFIG_PCI_LEGACY is not set -# CONFIG_PCI_DEBUG is not set -# CONFIG_PCI_STUB is not set -# CONFIG_PCCARD is not set -# CONFIG_HOTPLUG_PCI is not set -# CONFIG_HAS_RAPIDIO is not set - -# -# Advanced setup -# -# CONFIG_ADVANCED_OPTIONS is not set - -# -# Default settings for advanced configuration options are used -# -CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_PAGE_OFFSET=0xc0000000 -CONFIG_KERNEL_START=0xc0000000 -CONFIG_PHYSICAL_START=0x00000000 -CONFIG_PHYSICAL_ALIGN=0x10000000 -CONFIG_TASK_SIZE=0xc0000000 -CONFIG_NET=y - -# -# Networking options -# -CONFIG_COMPAT_NET_DEV_OPS=y -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -CONFIG_XFRM=y -CONFIG_XFRM_USER=y -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set -# CONFIG_XFRM_STATISTICS is not set -CONFIG_NET_KEY=m -# CONFIG_NET_KEY_MIGRATE is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_ADVANCED_ROUTER=y -CONFIG_ASK_IP_FIB_HASH=y -# CONFIG_IP_FIB_TRIE is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_MULTIPLE_TABLES=y -CONFIG_IP_ROUTE_MULTIPATH=y -CONFIG_IP_ROUTE_VERBOSE=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -CONFIG_NET_IPIP=y -CONFIG_NET_IPGRE=y -CONFIG_NET_IPGRE_BROADCAST=y -CONFIG_IP_MROUTE=y -CONFIG_IP_PIMSM_V1=y -CONFIG_IP_PIMSM_V2=y -CONFIG_ARPD=y -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -CONFIG_INET_TUNNEL=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -CONFIG_IPV6=y -# CONFIG_IPV6_PRIVACY is not set -# CONFIG_IPV6_ROUTER_PREF is not set -# CONFIG_IPV6_OPTIMISTIC_DAD is not set -# CONFIG_INET6_AH is not set -# CONFIG_INET6_ESP is not set -# CONFIG_INET6_IPCOMP is not set -# CONFIG_IPV6_MIP6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set -CONFIG_INET6_XFRM_MODE_TRANSPORT=y -CONFIG_INET6_XFRM_MODE_TUNNEL=y -CONFIG_INET6_XFRM_MODE_BEET=y -# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set -CONFIG_IPV6_SIT=y -CONFIG_IPV6_NDISC_NODETYPE=y -# CONFIG_IPV6_TUNNEL is not set -# CONFIG_IPV6_MULTIPLE_TABLES is not set -# CONFIG_IPV6_MROUTE is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set -# CONFIG_IP_DCCP is not set -CONFIG_IP_SCTP=m -# CONFIG_SCTP_DBG_MSG is not set -# CONFIG_SCTP_DBG_OBJCNT is not set -# CONFIG_SCTP_HMAC_NONE is not set -# CONFIG_SCTP_HMAC_SHA1 is not set -CONFIG_SCTP_HMAC_MD5=y -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_NET_DSA is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set -# CONFIG_DCB is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_CAN is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set -CONFIG_FIB_RULES=y -CONFIG_WIRELESS=y -# CONFIG_CFG80211 is not set -CONFIG_WIRELESS_OLD_REGULATORY=y -# CONFIG_WIRELESS_EXT is not set -# CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set -# CONFIG_WIMAX is not set -# CONFIG_RFKILL is not set -# CONFIG_NET_9P is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=y -CONFIG_FIRMWARE_IN_KERNEL=y -CONFIG_EXTRA_FIRMWARE="" -# CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set -# CONFIG_SYS_HYPERVISOR is not set -# CONFIG_CONNECTOR is not set -# CONFIG_MTD is not set -CONFIG_OF_DEVICE=y -CONFIG_OF_I2C=y -# CONFIG_PARPORT is not set -CONFIG_BLK_DEV=y -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -CONFIG_BLK_DEV_NBD=y -# CONFIG_BLK_DEV_SX8 is not set -# CONFIG_BLK_DEV_UB is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=131072 -# CONFIG_BLK_DEV_XIP is not set -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set -# CONFIG_BLK_DEV_HD is not set -CONFIG_MISC_DEVICES=y -# CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set -# CONFIG_SGI_IOC4 is not set -# CONFIG_TIFM_CORE is not set -# CONFIG_ICS932S401 is not set -# CONFIG_ENCLOSURE_SERVICES is not set -# CONFIG_HP_ILO is not set -# CONFIG_C2PORT is not set -CONFIG_HAVE_IDE=y -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=y -CONFIG_SCSI_DMA=y -# CONFIG_SCSI_TGT is not set -# CONFIG_SCSI_NETLINK is not set -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_ST=y -# CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=y -# CONFIG_BLK_DEV_SR_VENDOR is not set -CONFIG_CHR_DEV_SG=y -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_CONSTANTS is not set -CONFIG_SCSI_LOGGING=y -# CONFIG_SCSI_SCAN_ASYNC is not set -CONFIG_SCSI_WAIT_SCAN=m - -# -# SCSI Transports -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_LIBSAS is not set -# CONFIG_SCSI_SRP_ATTRS is not set -CONFIG_SCSI_LOWLEVEL=y -# CONFIG_ISCSI_TCP is not set -# CONFIG_SCSI_CXGB3_ISCSI is not set -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_SCSI_AIC94XX is not set -# CONFIG_SCSI_DPT_I2O is not set -# CONFIG_SCSI_ADVANSYS is not set -# CONFIG_SCSI_ARCMSR is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_HPTIOP is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_LIBFC is not set -# CONFIG_FCOE is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set -# CONFIG_SCSI_STEX is not set -# CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -# CONFIG_SCSI_QLA_FC is not set -# CONFIG_SCSI_QLA_ISCSI is not set -# CONFIG_SCSI_LPFC is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_SRP is not set -# CONFIG_SCSI_DH is not set -CONFIG_ATA=y -# CONFIG_ATA_NONSTANDARD is not set -CONFIG_SATA_PMP=y -CONFIG_SATA_AHCI=y -# CONFIG_SATA_SIL24 is not set -# CONFIG_SATA_FSL is not set -CONFIG_ATA_SFF=y -# CONFIG_SATA_SVW is not set -# CONFIG_ATA_PIIX is not set -# CONFIG_SATA_MV is not set -# CONFIG_SATA_NV is not set -# CONFIG_PDC_ADMA is not set -# CONFIG_SATA_QSTOR is not set -# CONFIG_SATA_PROMISE is not set -# CONFIG_SATA_SX4 is not set -# CONFIG_SATA_SIL is not set -# CONFIG_SATA_SIS is not set -# CONFIG_SATA_ULI is not set -# CONFIG_SATA_VIA is not set -# CONFIG_SATA_VITESSE is not set -# CONFIG_SATA_INIC162X is not set -CONFIG_PATA_ALI=y -# CONFIG_PATA_AMD is not set -# CONFIG_PATA_ARTOP is not set -# CONFIG_PATA_ATIIXP is not set -# CONFIG_PATA_CMD640_PCI is not set -# CONFIG_PATA_CMD64X is not set -# CONFIG_PATA_CS5520 is not set -# CONFIG_PATA_CS5530 is not set -# CONFIG_PATA_CYPRESS is not set -# CONFIG_PATA_EFAR is not set -# CONFIG_ATA_GENERIC is not set -# CONFIG_PATA_HPT366 is not set -# CONFIG_PATA_HPT37X is not set -# CONFIG_PATA_HPT3X2N is not set -# CONFIG_PATA_HPT3X3 is not set -# CONFIG_PATA_IT821X is not set -# CONFIG_PATA_IT8213 is not set -# CONFIG_PATA_JMICRON is not set -# CONFIG_PATA_TRIFLEX is not set -# CONFIG_PATA_MARVELL is not set -# CONFIG_PATA_MPIIX is not set -# CONFIG_PATA_OLDPIIX is not set -# CONFIG_PATA_NETCELL is not set -# CONFIG_PATA_NINJA32 is not set -# CONFIG_PATA_NS87410 is not set -# CONFIG_PATA_NS87415 is not set -# CONFIG_PATA_OPTI is not set -# CONFIG_PATA_OPTIDMA is not set -# CONFIG_PATA_PDC_OLD is not set -# CONFIG_PATA_RADISYS is not set -# CONFIG_PATA_RZ1000 is not set -# CONFIG_PATA_SC1200 is not set -# CONFIG_PATA_SERVERWORKS is not set -# CONFIG_PATA_PDC2027X is not set -# CONFIG_PATA_SIL680 is not set -# CONFIG_PATA_SIS is not set -# CONFIG_PATA_VIA is not set -# CONFIG_PATA_WINBOND is not set -# CONFIG_PATA_PLATFORM is not set -# CONFIG_PATA_SCH is not set -# CONFIG_MD is not set -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# Enable only one of the two stacks, unless you know what you are doing -# -# CONFIG_FIREWIRE is not set -# CONFIG_IEEE1394 is not set -# CONFIG_I2O is not set -# CONFIG_MACINTOSH_DRIVERS is not set -CONFIG_NETDEVICES=y -CONFIG_DUMMY=y -# CONFIG_BONDING is not set -# CONFIG_MACVLAN is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_VETH is not set -# CONFIG_ARCNET is not set -CONFIG_PHYLIB=y - -# -# MII PHY device drivers -# -# CONFIG_MARVELL_PHY is not set -# CONFIG_DAVICOM_PHY is not set -# CONFIG_QSEMI_PHY is not set -# CONFIG_LXT_PHY is not set -# CONFIG_CICADA_PHY is not set -CONFIG_VITESSE_PHY=y -# CONFIG_SMSC_PHY is not set -# CONFIG_BROADCOM_PHY is not set -# CONFIG_ICPLUS_PHY is not set -# CONFIG_REALTEK_PHY is not set -# CONFIG_NATIONAL_PHY is not set -# CONFIG_STE10XP is not set -# CONFIG_LSI_ET1011C_PHY is not set -# CONFIG_FIXED_PHY is not set -# CONFIG_MDIO_BITBANG is not set -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -# CONFIG_NET_VENDOR_3COM is not set -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -# CONFIG_IBM_NEW_EMAC_ZMII is not set -# CONFIG_IBM_NEW_EMAC_RGMII is not set -# CONFIG_IBM_NEW_EMAC_TAH is not set -# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set -# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set -# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set -# CONFIG_NET_PCI is not set -# CONFIG_B44 is not set -# CONFIG_ATL2 is not set -CONFIG_NETDEV_1000=y -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_E1000E is not set -# CONFIG_IP1000 is not set -# CONFIG_IGB is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SKY2 is not set -# CONFIG_VIA_VELOCITY is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set -CONFIG_GIANFAR=y -# CONFIG_QLA3XXX is not set -# CONFIG_ATL1 is not set -# CONFIG_ATL1E is not set -# CONFIG_JME is not set -CONFIG_NETDEV_10000=y -# CONFIG_CHELSIO_T1 is not set -CONFIG_CHELSIO_T3_DEPENDS=y -# CONFIG_CHELSIO_T3 is not set -# CONFIG_ENIC is not set -# CONFIG_IXGBE is not set -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set -# CONFIG_MYRI10GE is not set -# CONFIG_NETXEN_NIC is not set -# CONFIG_NIU is not set -# CONFIG_MLX4_EN is not set -# CONFIG_MLX4_CORE is not set -# CONFIG_TEHUTI is not set -# CONFIG_BNX2X is not set -# CONFIG_QLGE is not set -# CONFIG_SFC is not set -# CONFIG_TR is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set - -# -# Enable WiMAX (Networking options) to see the WiMAX drivers -# - -# -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET is not set -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_NET_FC is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_ISDN is not set -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y -CONFIG_INPUT_FF_MEMLESS=m -# CONFIG_INPUT_POLLDEV is not set - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -CONFIG_SERIO_I8042=y -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_PCIPS2 is not set -CONFIG_SERIO_LIBPS2=y -# CONFIG_SERIO_RAW is not set -# CONFIG_SERIO_XILINX_XPS_PS2 is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -CONFIG_CONSOLE_TRANSLATIONS=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_VT_HW_CONSOLE_BINDING is not set -CONFIG_DEVKMEM=y -# CONFIG_SERIAL_NONSTANDARD is not set -# CONFIG_NOZOMI is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_PCI=y -CONFIG_SERIAL_8250_NR_UARTS=2 -CONFIG_SERIAL_8250_RUNTIME_UARTS=2 -CONFIG_SERIAL_8250_EXTENDED=y -CONFIG_SERIAL_8250_MANY_PORTS=y -CONFIG_SERIAL_8250_SHARE_IRQ=y -CONFIG_SERIAL_8250_DETECT_IRQ=y -CONFIG_SERIAL_8250_RSA=y - -# -# Non-8250 serial port support -# -# CONFIG_SERIAL_UARTLITE is not set -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set -# CONFIG_SERIAL_OF_PLATFORM is not set -CONFIG_UNIX98_PTYS=y -# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_HVC_UDBG is not set -# CONFIG_IPMI_HANDLER is not set -CONFIG_HW_RANDOM=y -CONFIG_NVRAM=y -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_TCG_TPM is not set -CONFIG_DEVPORT=y -CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y -# CONFIG_I2C_CHARDEV is not set -CONFIG_I2C_HELPER_AUTO=y - -# -# I2C Hardware Bus support -# - -# -# PC SMBus host controller drivers -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_ISCH is not set -# CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set - -# -# I2C system bus drivers (mostly embedded / system-on-chip) -# -CONFIG_I2C_MPC=y -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_SIMTEC is not set - -# -# External I2C/SMBus adapter drivers -# -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_TINY_USB is not set - -# -# Graphics adapter I2C/DDC channel drivers -# -# CONFIG_I2C_VOODOO3 is not set - -# -# Other I2C/SMBus bus drivers -# -# CONFIG_I2C_PCA_PLATFORM is not set -# CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -CONFIG_EEPROM_LEGACY=y -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_SENSORS_TSL2550 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set -# CONFIG_SPI is not set -CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y -# CONFIG_GPIOLIB is not set -# CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set -# CONFIG_HWMON is not set -# CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set -# CONFIG_WATCHDOG is not set -CONFIG_SSB_POSSIBLE=y - -# -# Sonics Silicon Backplane -# -# CONFIG_SSB is not set - -# -# Multifunction device drivers -# -# CONFIG_MFD_CORE is not set -# CONFIG_MFD_SM501 is not set -# CONFIG_HTC_PASIC3 is not set -# CONFIG_TWL4030_CORE is not set -# CONFIG_MFD_TMIO is not set -# CONFIG_PMIC_DA903X is not set -# CONFIG_MFD_WM8400 is not set -# CONFIG_MFD_WM8350_I2C is not set -# CONFIG_MFD_PCF50633 is not set -# CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -CONFIG_DVB_CORE=m -CONFIG_VIDEO_MEDIA=m - -# -# Multimedia drivers -# -# CONFIG_MEDIA_ATTACH is not set -CONFIG_MEDIA_TUNER=m -# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set -CONFIG_MEDIA_TUNER_SIMPLE=m -CONFIG_MEDIA_TUNER_TDA8290=m -CONFIG_MEDIA_TUNER_TDA9887=m -CONFIG_MEDIA_TUNER_TEA5761=m -CONFIG_MEDIA_TUNER_TEA5767=m -CONFIG_MEDIA_TUNER_MT20XX=m -CONFIG_MEDIA_TUNER_XC2028=m -CONFIG_MEDIA_TUNER_XC5000=m -# CONFIG_DVB_DYNAMIC_MINORS is not set -CONFIG_DVB_CAPTURE_DRIVERS=y - -# -# Supported SAA7146 based PCI Adapters -# -# CONFIG_TTPCI_EEPROM is not set -# CONFIG_DVB_BUDGET_CORE is not set - -# -# Supported USB Adapters -# -# CONFIG_DVB_USB is not set -# CONFIG_DVB_TTUSB_BUDGET is not set -# CONFIG_DVB_TTUSB_DEC is not set -# CONFIG_DVB_SIANO_SMS1XXX is not set - -# -# Supported FlexCopII (B2C2) Adapters -# -# CONFIG_DVB_B2C2_FLEXCOP is not set - -# -# Supported BT878 Adapters -# - -# -# Supported Pluto2 Adapters -# -# CONFIG_DVB_PLUTO2 is not set - -# -# Supported SDMC DM1105 Adapters -# -# CONFIG_DVB_DM1105 is not set - -# -# Supported DVB Frontends -# - -# -# Customise DVB Frontends -# -# CONFIG_DVB_FE_CUSTOMISE is not set - -# -# Multistandard (satellite) frontends -# -# CONFIG_DVB_STB0899 is not set -# CONFIG_DVB_STB6100 is not set - -# -# DVB-S (satellite) frontends -# -# CONFIG_DVB_CX24110 is not set -# CONFIG_DVB_CX24123 is not set -# CONFIG_DVB_MT312 is not set -# CONFIG_DVB_S5H1420 is not set -# CONFIG_DVB_STV0288 is not set -# CONFIG_DVB_STB6000 is not set -# CONFIG_DVB_STV0299 is not set -# CONFIG_DVB_TDA8083 is not set -# CONFIG_DVB_TDA10086 is not set -# CONFIG_DVB_TDA8261 is not set -# CONFIG_DVB_VES1X93 is not set -# CONFIG_DVB_TUNER_ITD1000 is not set -# CONFIG_DVB_TUNER_CX24113 is not set -# CONFIG_DVB_TDA826X is not set -# CONFIG_DVB_TUA6100 is not set -# CONFIG_DVB_CX24116 is not set -# CONFIG_DVB_SI21XX is not set - -# -# DVB-T (terrestrial) frontends -# -# CONFIG_DVB_SP8870 is not set -# CONFIG_DVB_SP887X is not set -# CONFIG_DVB_CX22700 is not set -# CONFIG_DVB_CX22702 is not set -# CONFIG_DVB_DRX397XD is not set -# CONFIG_DVB_L64781 is not set -# CONFIG_DVB_TDA1004X is not set -# CONFIG_DVB_NXT6000 is not set -# CONFIG_DVB_MT352 is not set -# CONFIG_DVB_ZL10353 is not set -# CONFIG_DVB_DIB3000MB is not set -# CONFIG_DVB_DIB3000MC is not set -# CONFIG_DVB_DIB7000M is not set -# CONFIG_DVB_DIB7000P is not set -# CONFIG_DVB_TDA10048 is not set - -# -# DVB-C (cable) frontends -# -# CONFIG_DVB_VES1820 is not set -# CONFIG_DVB_TDA10021 is not set -# CONFIG_DVB_TDA10023 is not set -# CONFIG_DVB_STV0297 is not set - -# -# ATSC (North American/Korean Terrestrial/Cable DTV) frontends -# -# CONFIG_DVB_NXT200X is not set -# CONFIG_DVB_OR51211 is not set -# CONFIG_DVB_OR51132 is not set -# CONFIG_DVB_BCM3510 is not set -# CONFIG_DVB_LGDT330X is not set -# CONFIG_DVB_LGDT3304 is not set -# CONFIG_DVB_S5H1409 is not set -# CONFIG_DVB_AU8522 is not set -# CONFIG_DVB_S5H1411 is not set - -# -# ISDB-T (terrestrial) frontends -# -# CONFIG_DVB_S921 is not set - -# -# Digital terrestrial only tuners/PLL -# -# CONFIG_DVB_PLL is not set -# CONFIG_DVB_TUNER_DIB0070 is not set - -# -# SEC control devices for DVB-S -# -# CONFIG_DVB_LNBP21 is not set -# CONFIG_DVB_ISL6405 is not set -# CONFIG_DVB_ISL6421 is not set -# CONFIG_DVB_LGS8GL5 is not set - -# -# Tools to develop new frontends -# -# CONFIG_DVB_DUMMY_FE is not set -# CONFIG_DVB_AF9013 is not set -CONFIG_DAB=y -# CONFIG_USB_DABUSB is not set - -# -# Graphics support -# -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_VGASTATE is not set -CONFIG_VIDEO_OUTPUT_CONTROL=y -# CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set - -# -# Console display driver support -# -CONFIG_VGA_CONSOLE=y -# CONFIG_VGACON_SOFT_SCROLLBACK is not set -CONFIG_DUMMY_CONSOLE=y -CONFIG_SOUND=y -CONFIG_SOUND_OSS_CORE=y -CONFIG_SND=y -CONFIG_SND_TIMER=y -CONFIG_SND_PCM=y -# CONFIG_SND_SEQUENCER is not set -CONFIG_SND_OSSEMUL=y -CONFIG_SND_MIXER_OSS=y -CONFIG_SND_PCM_OSS=y -CONFIG_SND_PCM_OSS_PLUGINS=y -# CONFIG_SND_HRTIMER is not set -# CONFIG_SND_DYNAMIC_MINORS is not set -# CONFIG_SND_SUPPORT_OLD_API is not set -CONFIG_SND_VERBOSE_PROCFS=y -# CONFIG_SND_VERBOSE_PRINTK is not set -# CONFIG_SND_DEBUG is not set -CONFIG_SND_VMASTER=y -CONFIG_SND_AC97_CODEC=y -CONFIG_SND_DRIVERS=y -# CONFIG_SND_DUMMY is not set -# CONFIG_SND_MTPAV is not set -# CONFIG_SND_SERIAL_U16550 is not set -# CONFIG_SND_MPU401 is not set -# CONFIG_SND_AC97_POWER_SAVE is not set -CONFIG_SND_PCI=y -# CONFIG_SND_AD1889 is not set -# CONFIG_SND_ALS300 is not set -# CONFIG_SND_ALS4000 is not set -# CONFIG_SND_ALI5451 is not set -# CONFIG_SND_ATIIXP is not set -# CONFIG_SND_ATIIXP_MODEM is not set -# CONFIG_SND_AU8810 is not set -# CONFIG_SND_AU8820 is not set -# CONFIG_SND_AU8830 is not set -# CONFIG_SND_AW2 is not set -# CONFIG_SND_AZT3328 is not set -# CONFIG_SND_BT87X is not set -# CONFIG_SND_CA0106 is not set -# CONFIG_SND_CMIPCI is not set -# CONFIG_SND_OXYGEN is not set -# CONFIG_SND_CS4281 is not set -# CONFIG_SND_CS46XX is not set -# CONFIG_SND_CS5530 is not set -# CONFIG_SND_DARLA20 is not set -# CONFIG_SND_GINA20 is not set -# CONFIG_SND_LAYLA20 is not set -# CONFIG_SND_DARLA24 is not set -# CONFIG_SND_GINA24 is not set -# CONFIG_SND_LAYLA24 is not set -# CONFIG_SND_MONA is not set -# CONFIG_SND_MIA is not set -# CONFIG_SND_ECHO3G is not set -# CONFIG_SND_INDIGO is not set -# CONFIG_SND_INDIGOIO is not set -# CONFIG_SND_INDIGODJ is not set -# CONFIG_SND_EMU10K1 is not set -# CONFIG_SND_EMU10K1X is not set -# CONFIG_SND_ENS1370 is not set -# CONFIG_SND_ENS1371 is not set -# CONFIG_SND_ES1938 is not set -# CONFIG_SND_ES1968 is not set -# CONFIG_SND_FM801 is not set -# CONFIG_SND_HDA_INTEL is not set -# CONFIG_SND_HDSP is not set -# CONFIG_SND_HDSPM is not set -# CONFIG_SND_HIFIER is not set -# CONFIG_SND_ICE1712 is not set -# CONFIG_SND_ICE1724 is not set -CONFIG_SND_INTEL8X0=y -# CONFIG_SND_INTEL8X0M is not set -# CONFIG_SND_KORG1212 is not set -# CONFIG_SND_MAESTRO3 is not set -# CONFIG_SND_MIXART is not set -# CONFIG_SND_NM256 is not set -# CONFIG_SND_PCXHR is not set -# CONFIG_SND_RIPTIDE is not set -# CONFIG_SND_RME32 is not set -# CONFIG_SND_RME96 is not set -# CONFIG_SND_RME9652 is not set -# CONFIG_SND_SONICVIBES is not set -# CONFIG_SND_TRIDENT is not set -# CONFIG_SND_VIA82XX is not set -# CONFIG_SND_VIA82XX_MODEM is not set -# CONFIG_SND_VIRTUOSO is not set -# CONFIG_SND_VX222 is not set -# CONFIG_SND_YMFPCI is not set -CONFIG_SND_PPC=y -CONFIG_SND_USB=y -# CONFIG_SND_USB_AUDIO is not set -# CONFIG_SND_USB_USX2Y is not set -# CONFIG_SND_USB_CAIAQ is not set -# CONFIG_SND_SOC is not set -# CONFIG_SOUND_PRIME is not set -CONFIG_AC97_BUS=y -CONFIG_HID_SUPPORT=y -CONFIG_HID=y -# CONFIG_HID_DEBUG is not set -# CONFIG_HIDRAW is not set - -# -# USB Input Devices -# -CONFIG_USB_HID=y -# CONFIG_HID_PID is not set -# CONFIG_USB_HIDDEV is not set - -# -# Special HID drivers -# -CONFIG_HID_COMPAT=y -CONFIG_HID_A4TECH=y -CONFIG_HID_APPLE=y -CONFIG_HID_BELKIN=y -CONFIG_HID_CHERRY=y -CONFIG_HID_CHICONY=y -CONFIG_HID_CYPRESS=y -CONFIG_HID_EZKEY=y -CONFIG_HID_GYRATION=y -CONFIG_HID_LOGITECH=y -# CONFIG_LOGITECH_FF is not set -# CONFIG_LOGIRUMBLEPAD2_FF is not set -CONFIG_HID_MICROSOFT=y -CONFIG_HID_MONTEREY=y -# CONFIG_HID_NTRIG is not set -CONFIG_HID_PANTHERLORD=y -# CONFIG_PANTHERLORD_FF is not set -CONFIG_HID_PETALYNX=y -CONFIG_HID_SAMSUNG=y -CONFIG_HID_SONY=y -CONFIG_HID_SUNPLUS=y -# CONFIG_GREENASIA_FF is not set -# CONFIG_HID_TOPSEED is not set -CONFIG_THRUSTMASTER_FF=m -CONFIG_ZEROPLUS_FF=m -CONFIG_USB_SUPPORT=y -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -CONFIG_USB_ARCH_HAS_EHCI=y -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set -# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set - -# -# Miscellaneous USB options -# -CONFIG_USB_DEVICEFS=y -CONFIG_USB_DEVICE_CLASS=y -# CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_OTG is not set -# CONFIG_USB_OTG_WHITELIST is not set -# CONFIG_USB_OTG_BLACKLIST_HUB is not set -CONFIG_USB_MON=y -# CONFIG_USB_WUSB is not set -# CONFIG_USB_WUSB_CBAF is not set - -# -# USB Host Controller Drivers -# -# CONFIG_USB_C67X00_HCD is not set -CONFIG_USB_EHCI_HCD=y -# CONFIG_USB_EHCI_ROOT_HUB_TT is not set -# CONFIG_USB_EHCI_TT_NEWSCHED is not set -# CONFIG_USB_EHCI_FSL is not set -CONFIG_USB_EHCI_HCD_PPC_OF=y -# CONFIG_USB_OXU210HP_HCD is not set -# CONFIG_USB_ISP116X_HCD is not set -# CONFIG_USB_ISP1760_HCD is not set -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_OHCI_HCD_PPC_OF=y -CONFIG_USB_OHCI_HCD_PPC_OF_BE=y -CONFIG_USB_OHCI_HCD_PPC_OF_LE=y -CONFIG_USB_OHCI_HCD_PCI=y -CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y -CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y -CONFIG_USB_OHCI_LITTLE_ENDIAN=y -# CONFIG_USB_UHCI_HCD is not set -# CONFIG_USB_SL811_HCD is not set -# CONFIG_USB_R8A66597_HCD is not set -# CONFIG_USB_WHCI_HCD is not set -# CONFIG_USB_HWA_HCD is not set - -# -# USB Device Class drivers -# -# CONFIG_USB_ACM is not set -# CONFIG_USB_PRINTER is not set -# CONFIG_USB_WDM is not set -# CONFIG_USB_TMC is not set - -# -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; -# - -# -# see USB_STORAGE Help for more information -# -CONFIG_USB_STORAGE=y -# CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_USBAT is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set -# CONFIG_USB_STORAGE_ALAUDA is not set -# CONFIG_USB_STORAGE_ONETOUCH is not set -# CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set -# CONFIG_USB_LIBUSUAL is not set - -# -# USB Imaging devices -# -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_MICROTEK is not set - -# -# USB port drivers -# -# CONFIG_USB_SERIAL is not set - -# -# USB Miscellaneous drivers -# -# CONFIG_USB_EMI62 is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_ADUTUX is not set -# CONFIG_USB_SEVSEG is not set -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_LEGOTOWER is not set -# CONFIG_USB_LCD is not set -# CONFIG_USB_BERRY_CHARGE is not set -# CONFIG_USB_LED is not set -# CONFIG_USB_CYPRESS_CY7C63 is not set -# CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set -# CONFIG_USB_IDMOUSE is not set -# CONFIG_USB_FTDI_ELAN is not set -# CONFIG_USB_APPLEDISPLAY is not set -# CONFIG_USB_SISUSBVGA is not set -# CONFIG_USB_LD is not set -# CONFIG_USB_TRANCEVIBRATOR is not set -# CONFIG_USB_IOWARRIOR is not set -# CONFIG_USB_TEST is not set -# CONFIG_USB_ISIGHTFW is not set -# CONFIG_USB_VST is not set -# CONFIG_USB_GADGET is not set - -# -# OTG and related infrastructure -# -# CONFIG_UWB is not set -# CONFIG_MMC is not set -# CONFIG_MEMSTICK is not set -# CONFIG_NEW_LEDS is not set -# CONFIG_ACCESSIBILITY is not set -# CONFIG_INFINIBAND is not set -# CONFIG_EDAC is not set -CONFIG_RTC_LIB=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_HCTOSYS=y -CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -# CONFIG_RTC_DEBUG is not set - -# -# RTC interfaces -# -CONFIG_RTC_INTF_SYSFS=y -CONFIG_RTC_INTF_PROC=y -CONFIG_RTC_INTF_DEV=y -# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set -# CONFIG_RTC_DRV_TEST is not set - -# -# I2C RTC drivers -# -# CONFIG_RTC_DRV_DS1307 is not set -# CONFIG_RTC_DRV_DS1374 is not set -# CONFIG_RTC_DRV_DS1672 is not set -# CONFIG_RTC_DRV_MAX6900 is not set -# CONFIG_RTC_DRV_RS5C372 is not set -# CONFIG_RTC_DRV_ISL1208 is not set -# CONFIG_RTC_DRV_X1205 is not set -# CONFIG_RTC_DRV_PCF8563 is not set -# CONFIG_RTC_DRV_PCF8583 is not set -# CONFIG_RTC_DRV_M41T80 is not set -# CONFIG_RTC_DRV_S35390A is not set -# CONFIG_RTC_DRV_FM3130 is not set -# CONFIG_RTC_DRV_RX8581 is not set - -# -# SPI RTC drivers -# - -# -# Platform RTC drivers -# -CONFIG_RTC_DRV_CMOS=y -# CONFIG_RTC_DRV_DS1286 is not set -# CONFIG_RTC_DRV_DS1511 is not set -# CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_DS1742 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set -# CONFIG_RTC_DRV_M48T86 is not set -# CONFIG_RTC_DRV_M48T35 is not set -# CONFIG_RTC_DRV_M48T59 is not set -# CONFIG_RTC_DRV_BQ4802 is not set -# CONFIG_RTC_DRV_V3020 is not set - -# -# on-CPU RTC drivers -# -# CONFIG_RTC_DRV_PPC is not set -# CONFIG_DMADEVICES is not set -# CONFIG_UIO is not set -# CONFIG_STAGING is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4_FS is not set -CONFIG_JBD=y -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y -# CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_BTRFS_FS is not set -CONFIG_DNOTIFY=y -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=m -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_UDF_FS=m -CONFIG_UDF_NLS=y - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=y -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=y -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -CONFIG_NTFS_FS=y -# CONFIG_NTFS_DEBUG is not set -# CONFIG_NTFS_RW is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_PROC_SYSCTL=y -CONFIG_PROC_PAGE_MONITOR=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -# CONFIG_CONFIGFS_FS is not set -CONFIG_MISC_FILESYSTEMS=y -CONFIG_ADFS_FS=m -# CONFIG_ADFS_FS_RW is not set -CONFIG_AFFS_FS=m -CONFIG_HFS_FS=m -CONFIG_HFSPLUS_FS=m -CONFIG_BEFS_FS=m -# CONFIG_BEFS_DEBUG is not set -CONFIG_BFS_FS=m -CONFIG_EFS_FS=m -CONFIG_CRAMFS=y -# CONFIG_SQUASHFS is not set -CONFIG_VXFS_FS=m -# CONFIG_MINIX_FS is not set -# CONFIG_OMFS_FS is not set -CONFIG_HPFS_FS=m -CONFIG_QNX4FS_FS=m -# CONFIG_ROMFS_FS is not set -CONFIG_SYSV_FS=m -CONFIG_UFS_FS=m -# CONFIG_UFS_FS_WRITE is not set -# CONFIG_UFS_DEBUG is not set -CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_NFSD=y -# CONFIG_NFSD_V3 is not set -# CONFIG_NFSD_V4 is not set -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set -CONFIG_RPCSEC_GSS_KRB5=y -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -CONFIG_MAC_PARTITION=y -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_KARMA_PARTITION is not set -# CONFIG_EFI_PARTITION is not set -# CONFIG_SYSV68_PARTITION is not set -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -# CONFIG_NLS_CODEPAGE_437 is not set -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set -# CONFIG_NLS_ISO8859_1 is not set -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -CONFIG_NLS_UTF8=m -# CONFIG_DLM is not set - -# -# Library routines -# -CONFIG_BITREVERSE=y -CONFIG_GENERIC_FIND_LAST_BIT=y -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -CONFIG_CRC_T10DIF=y -CONFIG_CRC_ITU_T=m -CONFIG_CRC32=y -# CONFIG_CRC7 is not set -CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=y -CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y -CONFIG_HAVE_LMB=y - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_WARN_DEPRECATED=y -CONFIG_ENABLE_MUST_CHECK=y -CONFIG_FRAME_WARN=1024 -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_SHIRQ is not set -CONFIG_DETECT_SOFTLOCKUP=y -# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set -CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 -CONFIG_SCHED_DEBUG=y -# CONFIG_SCHEDSTATS is not set -# CONFIG_TIMER_STATS is not set -# CONFIG_DEBUG_OBJECTS is not set -# CONFIG_SLUB_DEBUG_ON is not set -# CONFIG_SLUB_STATS is not set -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_RT_MUTEX_TESTER is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -# CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_HIGHMEM is not set -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_DEBUG_INFO=y -# CONFIG_DEBUG_VM is not set -# CONFIG_DEBUG_WRITECOUNT is not set -# CONFIG_DEBUG_MEMORY_INIT is not set -# CONFIG_DEBUG_LIST is not set -# CONFIG_DEBUG_SG is not set -# CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set -# CONFIG_RCU_TORTURE_TEST is not set -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -# CONFIG_BACKTRACE_SELF_TEST is not set -# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set -# CONFIG_FAULT_INJECTION is not set -# CONFIG_LATENCYTOP is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set -# CONFIG_SAMPLES is not set -CONFIG_HAVE_ARCH_KGDB=y -# CONFIG_KGDB is not set -CONFIG_PRINT_STACK_DEPTH=64 -# CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_CODE_PATCHING_SELFTEST is not set -# CONFIG_FTR_FIXUP_SELFTEST is not set -# CONFIG_MSI_BITMAP_SELFTEST is not set -# CONFIG_XMON is not set -# CONFIG_IRQSTACKS is not set -# CONFIG_BDI_SWITCH is not set -# CONFIG_PPC_EARLY_DEBUG is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -# CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set -CONFIG_CRYPTO=y - -# -# Crypto core or helper -# -# CONFIG_CRYPTO_FIPS is not set -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_ALGAPI2=y -CONFIG_CRYPTO_AEAD=y -CONFIG_CRYPTO_AEAD2=y -CONFIG_CRYPTO_BLKCIPHER=y -CONFIG_CRYPTO_BLKCIPHER2=y -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_HASH2=y -CONFIG_CRYPTO_RNG2=y -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_MANAGER2=y -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_NULL is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_AUTHENC=y -# CONFIG_CRYPTO_TEST is not set - -# -# Authenticated Encryption with Associated Data -# -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_SEQIV is not set - -# -# Block modes -# -CONFIG_CRYPTO_CBC=y -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_CTS is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_LRW is not set -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_XTS is not set - -# -# Hash modes -# -CONFIG_CRYPTO_HMAC=y -# CONFIG_CRYPTO_XCBC is not set - -# -# Digest -# -CONFIG_CRYPTO_CRC32C=m -# CONFIG_CRYPTO_MD4 is not set -CONFIG_CRYPTO_MD5=y -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_RMD128 is not set -# CONFIG_CRYPTO_RMD160 is not set -# CONFIG_CRYPTO_RMD256 is not set -# CONFIG_CRYPTO_RMD320 is not set -CONFIG_CRYPTO_SHA1=m -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_WP512 is not set - -# -# Ciphers -# -# CONFIG_CRYPTO_AES is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_ARC4 is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_CAST5 is not set -# CONFIG_CRYPTO_CAST6 is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_SALSA20 is not set -# CONFIG_CRYPTO_SEED is not set -# CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_TWOFISH is not set - -# -# Compression -# -# CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_LZO is not set - -# -# Random Number Generation -# -# CONFIG_CRYPTO_ANSI_CPRNG is not set -CONFIG_CRYPTO_HW=y -# CONFIG_CRYPTO_DEV_HIFN_795X is not set -CONFIG_CRYPTO_DEV_TALITOS=y -# CONFIG_PPC_CLOCK is not set -# CONFIG_VIRTUALIZATION is not set -- cgit v1.2.3 From 9b8de7479d0dbab1ed98b5b015d44232c9d3d08e Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 21 Apr 2009 23:00:24 +0100 Subject: FRV: Fix the section attribute on UP DECLARE_PER_CPU() In non-SMP mode, the variable section attribute specified by DECLARE_PER_CPU() does not agree with that specified by DEFINE_PER_CPU(). This means that architectures that have a small data section references relative to a base register may throw up linkage errors due to too great a displacement between where the base register points and the per-CPU variable. On FRV, the .h declaration says that the variable is in the .sdata section, but the .c definition says it's actually in the .data section. The linker throws up the following errors: kernel/built-in.o: In function `release_task': kernel/exit.c:78: relocation truncated to fit: R_FRV_GPREL12 against symbol `per_cpu__process_counts' defined in .data section in kernel/built-in.o kernel/exit.c:78: relocation truncated to fit: R_FRV_GPREL12 against symbol `per_cpu__process_counts' defined in .data section in kernel/built-in.o To fix this, DECLARE_PER_CPU() should simply apply the same section attribute as does DEFINE_PER_CPU(). However, this is made slightly more complex by virtue of the fact that there are several variants on DEFINE, so these need to be matched by variants on DECLARE. Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- arch/alpha/include/asm/percpu.h | 2 +- arch/ia64/include/asm/smp.h | 2 +- arch/x86/include/asm/desc.h | 2 +- arch/x86/include/asm/hardirq.h | 2 +- arch/x86/include/asm/processor.h | 6 +++--- arch/x86/include/asm/tlbflush.h | 2 +- include/asm-generic/percpu.h | 43 ++++++++++++++++++++++++++++++++++++++-- include/linux/percpu.h | 24 ---------------------- net/rds/rds.h | 2 +- 9 files changed, 50 insertions(+), 35 deletions(-) diff --git a/arch/alpha/include/asm/percpu.h b/arch/alpha/include/asm/percpu.h index 3495e8e00d7..e9e0bb5a23b 100644 --- a/arch/alpha/include/asm/percpu.h +++ b/arch/alpha/include/asm/percpu.h @@ -73,6 +73,6 @@ extern unsigned long __per_cpu_offset[NR_CPUS]; #endif /* SMP */ -#define DECLARE_PER_CPU(type, name) extern __typeof__(type) per_cpu_var(name) +#include #endif /* __ALPHA_PERCPU_H */ diff --git a/arch/ia64/include/asm/smp.h b/arch/ia64/include/asm/smp.h index 59840833625..d217d1d4e05 100644 --- a/arch/ia64/include/asm/smp.h +++ b/arch/ia64/include/asm/smp.h @@ -58,7 +58,7 @@ extern struct smp_boot_data { extern char no_int_routing __devinitdata; extern cpumask_t cpu_core_map[NR_CPUS]; -DECLARE_PER_CPU(cpumask_t, cpu_sibling_map); +DECLARE_PER_CPU_SHARED_ALIGNED(cpumask_t, cpu_sibling_map); extern int smp_num_siblings; extern void __iomem *ipi_base_addr; extern unsigned char smp_int_redirect; diff --git a/arch/x86/include/asm/desc.h b/arch/x86/include/asm/desc.h index 5623c50d67b..c45f415ce31 100644 --- a/arch/x86/include/asm/desc.h +++ b/arch/x86/include/asm/desc.h @@ -37,7 +37,7 @@ extern gate_desc idt_table[]; struct gdt_page { struct desc_struct gdt[GDT_ENTRIES]; } __attribute__((aligned(PAGE_SIZE))); -DECLARE_PER_CPU(struct gdt_page, gdt_page); +DECLARE_PER_CPU_PAGE_ALIGNED(struct gdt_page, gdt_page); static inline struct desc_struct *get_cpu_gdt_table(unsigned int cpu) { diff --git a/arch/x86/include/asm/hardirq.h b/arch/x86/include/asm/hardirq.h index 039db6aa8e0..37555e52f98 100644 --- a/arch/x86/include/asm/hardirq.h +++ b/arch/x86/include/asm/hardirq.h @@ -26,7 +26,7 @@ typedef struct { #endif } ____cacheline_aligned irq_cpustat_t; -DECLARE_PER_CPU(irq_cpustat_t, irq_stat); +DECLARE_PER_CPU_SHARED_ALIGNED(irq_cpustat_t, irq_stat); /* We can have at most NR_VECTORS irqs routed to a cpu at a time */ #define MAX_HARDIRQS_PER_CPU NR_VECTORS diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h index fcf4d92e7e0..c2cceae709c 100644 --- a/arch/x86/include/asm/processor.h +++ b/arch/x86/include/asm/processor.h @@ -138,7 +138,7 @@ extern struct tss_struct doublefault_tss; extern __u32 cleared_cpu_caps[NCAPINTS]; #ifdef CONFIG_SMP -DECLARE_PER_CPU(struct cpuinfo_x86, cpu_info); +DECLARE_PER_CPU_SHARED_ALIGNED(struct cpuinfo_x86, cpu_info); #define cpu_data(cpu) per_cpu(cpu_info, cpu) #define current_cpu_data __get_cpu_var(cpu_info) #else @@ -270,7 +270,7 @@ struct tss_struct { } ____cacheline_aligned; -DECLARE_PER_CPU(struct tss_struct, init_tss); +DECLARE_PER_CPU_SHARED_ALIGNED(struct tss_struct, init_tss); /* * Save the original ist values for checking stack pointers during debugging @@ -393,7 +393,7 @@ union irq_stack_union { }; }; -DECLARE_PER_CPU(union irq_stack_union, irq_stack_union); +DECLARE_PER_CPU_FIRST(union irq_stack_union, irq_stack_union); DECLARE_INIT_PER_CPU(irq_stack_union); DECLARE_PER_CPU(char *, irq_stack_ptr); diff --git a/arch/x86/include/asm/tlbflush.h b/arch/x86/include/asm/tlbflush.h index d3539f998f8..16a5c84b032 100644 --- a/arch/x86/include/asm/tlbflush.h +++ b/arch/x86/include/asm/tlbflush.h @@ -152,7 +152,7 @@ struct tlb_state { struct mm_struct *active_mm; int state; }; -DECLARE_PER_CPU(struct tlb_state, cpu_tlbstate); +DECLARE_PER_CPU_SHARED_ALIGNED(struct tlb_state, cpu_tlbstate); static inline void reset_lazy_tlbstate(void) { diff --git a/include/asm-generic/percpu.h b/include/asm-generic/percpu.h index b0e63c672eb..af47b9e1006 100644 --- a/include/asm-generic/percpu.h +++ b/include/asm-generic/percpu.h @@ -73,11 +73,50 @@ extern void setup_per_cpu_areas(void); #endif /* SMP */ +#ifndef PER_CPU_BASE_SECTION +#ifdef CONFIG_SMP +#define PER_CPU_BASE_SECTION ".data.percpu" +#else +#define PER_CPU_BASE_SECTION ".data" +#endif +#endif + +#ifdef CONFIG_SMP + +#ifdef MODULE +#define PER_CPU_SHARED_ALIGNED_SECTION "" +#else +#define PER_CPU_SHARED_ALIGNED_SECTION ".shared_aligned" +#endif +#define PER_CPU_FIRST_SECTION ".first" + +#else + +#define PER_CPU_SHARED_ALIGNED_SECTION "" +#define PER_CPU_FIRST_SECTION "" + +#endif + #ifndef PER_CPU_ATTRIBUTES #define PER_CPU_ATTRIBUTES #endif -#define DECLARE_PER_CPU(type, name) extern PER_CPU_ATTRIBUTES \ - __typeof__(type) per_cpu_var(name) +#define DECLARE_PER_CPU_SECTION(type, name, section) \ + extern \ + __attribute__((__section__(PER_CPU_BASE_SECTION section))) \ + PER_CPU_ATTRIBUTES __typeof__(type) per_cpu__##name + +#define DECLARE_PER_CPU(type, name) \ + DECLARE_PER_CPU_SECTION(type, name, "") + +#define DECLARE_PER_CPU_SHARED_ALIGNED(type, name) \ + DECLARE_PER_CPU_SECTION(type, name, PER_CPU_SHARED_ALIGNED_SECTION) \ + ____cacheline_aligned_in_smp + +#define DECLARE_PER_CPU_PAGE_ALIGNED(type, name) \ + DECLARE_PER_CPU_SECTION(type, name, ".page_aligned") + +#define DECLARE_PER_CPU_FIRST(type, name) \ + DECLARE_PER_CPU_SECTION(type, name, PER_CPU_FIRST_SECTION) #endif /* _ASM_GENERIC_PERCPU_H_ */ diff --git a/include/linux/percpu.h b/include/linux/percpu.h index cfda2d5ad31..f052d818499 100644 --- a/include/linux/percpu.h +++ b/include/linux/percpu.h @@ -9,30 +9,6 @@ #include -#ifndef PER_CPU_BASE_SECTION -#ifdef CONFIG_SMP -#define PER_CPU_BASE_SECTION ".data.percpu" -#else -#define PER_CPU_BASE_SECTION ".data" -#endif -#endif - -#ifdef CONFIG_SMP - -#ifdef MODULE -#define PER_CPU_SHARED_ALIGNED_SECTION "" -#else -#define PER_CPU_SHARED_ALIGNED_SECTION ".shared_aligned" -#endif -#define PER_CPU_FIRST_SECTION ".first" - -#else - -#define PER_CPU_SHARED_ALIGNED_SECTION "" -#define PER_CPU_FIRST_SECTION "" - -#endif - #define DEFINE_PER_CPU_SECTION(type, name, section) \ __attribute__((__section__(PER_CPU_BASE_SECTION section))) \ PER_CPU_ATTRIBUTES __typeof__(type) per_cpu__##name diff --git a/net/rds/rds.h b/net/rds/rds.h index 619f0a30a4e..71794449ca4 100644 --- a/net/rds/rds.h +++ b/net/rds/rds.h @@ -638,7 +638,7 @@ struct rds_message *rds_send_get_message(struct rds_connection *, void rds_rdma_unuse(struct rds_sock *rs, u32 r_key, int force); /* stats.c */ -DECLARE_PER_CPU(struct rds_statistics, rds_stats); +DECLARE_PER_CPU_SHARED_ALIGNED(struct rds_statistics, rds_stats); #define rds_stats_inc_which(which, member) do { \ per_cpu(which, get_cpu()).member++; \ put_cpu(); \ -- cgit v1.2.3 From 5028eaa97dd1dab9cd7c30c4d38f71c708ca64bc Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 21 Apr 2009 23:00:29 +0100 Subject: PERCPU: Collect the DECLARE/DEFINE declarations together Collect the DECLARE/DEFINE declarations together in linux/percpu-defs.h so that they're in one place, and give them descriptive comments, particularly the SHARED_ALIGNED variant. It would be nice to collect these in linux/percpu.h, but that's not possible without sorting out the severe #include recursion between the x86 arch headers and the general headers (and possibly other arches too). Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- include/asm-generic/percpu.h | 26 ++------------ include/linux/percpu-defs.h | 84 ++++++++++++++++++++++++++++++++++++++++++++ include/linux/percpu.h | 20 ----------- 3 files changed, 86 insertions(+), 44 deletions(-) create mode 100644 include/linux/percpu-defs.h diff --git a/include/asm-generic/percpu.h b/include/asm-generic/percpu.h index af47b9e1006..d7d50d7ee51 100644 --- a/include/asm-generic/percpu.h +++ b/include/asm-generic/percpu.h @@ -1,13 +1,9 @@ #ifndef _ASM_GENERIC_PERCPU_H_ #define _ASM_GENERIC_PERCPU_H_ + #include #include - -/* - * Determine the real variable name from the name visible in the - * kernel sources. - */ -#define per_cpu_var(var) per_cpu__##var +#include #ifdef CONFIG_SMP @@ -101,22 +97,4 @@ extern void setup_per_cpu_areas(void); #define PER_CPU_ATTRIBUTES #endif -#define DECLARE_PER_CPU_SECTION(type, name, section) \ - extern \ - __attribute__((__section__(PER_CPU_BASE_SECTION section))) \ - PER_CPU_ATTRIBUTES __typeof__(type) per_cpu__##name - -#define DECLARE_PER_CPU(type, name) \ - DECLARE_PER_CPU_SECTION(type, name, "") - -#define DECLARE_PER_CPU_SHARED_ALIGNED(type, name) \ - DECLARE_PER_CPU_SECTION(type, name, PER_CPU_SHARED_ALIGNED_SECTION) \ - ____cacheline_aligned_in_smp - -#define DECLARE_PER_CPU_PAGE_ALIGNED(type, name) \ - DECLARE_PER_CPU_SECTION(type, name, ".page_aligned") - -#define DECLARE_PER_CPU_FIRST(type, name) \ - DECLARE_PER_CPU_SECTION(type, name, PER_CPU_FIRST_SECTION) - #endif /* _ASM_GENERIC_PERCPU_H_ */ diff --git a/include/linux/percpu-defs.h b/include/linux/percpu-defs.h new file mode 100644 index 00000000000..8f921d74f49 --- /dev/null +++ b/include/linux/percpu-defs.h @@ -0,0 +1,84 @@ +#ifndef _LINUX_PERCPU_DEFS_H +#define _LINUX_PERCPU_DEFS_H + +/* + * Determine the real variable name from the name visible in the + * kernel sources. + */ +#define per_cpu_var(var) per_cpu__##var + +/* + * Base implementations of per-CPU variable declarations and definitions, where + * the section in which the variable is to be placed is provided by the + * 'section' argument. This may be used to affect the parameters governing the + * variable's storage. + * + * NOTE! The sections for the DECLARE and for the DEFINE must match, lest + * linkage errors occur due the compiler generating the wrong code to access + * that section. + */ +#define DECLARE_PER_CPU_SECTION(type, name, section) \ + extern \ + __attribute__((__section__(PER_CPU_BASE_SECTION section))) \ + PER_CPU_ATTRIBUTES __typeof__(type) per_cpu__##name + +#define DEFINE_PER_CPU_SECTION(type, name, section) \ + __attribute__((__section__(PER_CPU_BASE_SECTION section))) \ + PER_CPU_ATTRIBUTES __typeof__(type) per_cpu__##name + +/* + * Variant on the per-CPU variable declaration/definition theme used for + * ordinary per-CPU variables. + */ +#define DECLARE_PER_CPU(type, name) \ + DECLARE_PER_CPU_SECTION(type, name, "") + +#define DEFINE_PER_CPU(type, name) \ + DEFINE_PER_CPU_SECTION(type, name, "") + +/* + * Declaration/definition used for per-CPU variables that must come first in + * the set of variables. + */ +#define DECLARE_PER_CPU_FIRST(type, name) \ + DECLARE_PER_CPU_SECTION(type, name, PER_CPU_FIRST_SECTION) + +#define DEFINE_PER_CPU_FIRST(type, name) \ + DEFINE_PER_CPU_SECTION(type, name, PER_CPU_FIRST_SECTION) + +/* + * Declaration/definition used for per-CPU variables that must be cacheline + * aligned under SMP conditions so that, whilst a particular instance of the + * data corresponds to a particular CPU, inefficiencies due to direct access by + * other CPUs are reduced by preventing the data from unnecessarily spanning + * cachelines. + * + * An example of this would be statistical data, where each CPU's set of data + * is updated by that CPU alone, but the data from across all CPUs is collated + * by a CPU processing a read from a proc file. + */ +#define DECLARE_PER_CPU_SHARED_ALIGNED(type, name) \ + DECLARE_PER_CPU_SECTION(type, name, PER_CPU_SHARED_ALIGNED_SECTION) \ + ____cacheline_aligned_in_smp + +#define DEFINE_PER_CPU_SHARED_ALIGNED(type, name) \ + DEFINE_PER_CPU_SECTION(type, name, PER_CPU_SHARED_ALIGNED_SECTION) \ + ____cacheline_aligned_in_smp + +/* + * Declaration/definition used for per-CPU variables that must be page aligned. + */ +#define DECLARE_PER_CPU_PAGE_ALIGNED(type, name) \ + DECLARE_PER_CPU_SECTION(type, name, ".page_aligned") + +#define DEFINE_PER_CPU_PAGE_ALIGNED(type, name) \ + DEFINE_PER_CPU_SECTION(type, name, ".page_aligned") + +/* + * Intermodule exports for per-CPU variables. + */ +#define EXPORT_PER_CPU_SYMBOL(var) EXPORT_SYMBOL(per_cpu__##var) +#define EXPORT_PER_CPU_SYMBOL_GPL(var) EXPORT_SYMBOL_GPL(per_cpu__##var) + + +#endif /* _LINUX_PERCPU_DEFS_H */ diff --git a/include/linux/percpu.h b/include/linux/percpu.h index f052d818499..1581ff235c7 100644 --- a/include/linux/percpu.h +++ b/include/linux/percpu.h @@ -9,26 +9,6 @@ #include -#define DEFINE_PER_CPU_SECTION(type, name, section) \ - __attribute__((__section__(PER_CPU_BASE_SECTION section))) \ - PER_CPU_ATTRIBUTES __typeof__(type) per_cpu__##name - -#define DEFINE_PER_CPU(type, name) \ - DEFINE_PER_CPU_SECTION(type, name, "") - -#define DEFINE_PER_CPU_SHARED_ALIGNED(type, name) \ - DEFINE_PER_CPU_SECTION(type, name, PER_CPU_SHARED_ALIGNED_SECTION) \ - ____cacheline_aligned_in_smp - -#define DEFINE_PER_CPU_PAGE_ALIGNED(type, name) \ - DEFINE_PER_CPU_SECTION(type, name, ".page_aligned") - -#define DEFINE_PER_CPU_FIRST(type, name) \ - DEFINE_PER_CPU_SECTION(type, name, PER_CPU_FIRST_SECTION) - -#define EXPORT_PER_CPU_SYMBOL(var) EXPORT_SYMBOL(per_cpu__##var) -#define EXPORT_PER_CPU_SYMBOL_GPL(var) EXPORT_SYMBOL_GPL(per_cpu__##var) - /* enough to cover all DEFINE_PER_CPUs in modules */ #ifdef CONFIG_MODULES #define PERCPU_MODULE_RESERVE (8 << 10) -- cgit v1.2.3 From 5dd559f020c98a2a4b3e063f09c0e4bc771ed838 Mon Sep 17 00:00:00 2001 From: Jonathan Corbet Date: Tue, 21 Apr 2009 16:30:32 -0600 Subject: Trivial: fix a typo in slow-work.h Fix a comment typo in slow-work.h ...a trivial mistake, but it will mess up kerneldoc if nothing else. Signed-off-by: Jonathan Corbet Signed-off-by: Linus Torvalds --- include/linux/slow-work.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/slow-work.h b/include/linux/slow-work.h index 85958277f83..b65c8881f07 100644 --- a/include/linux/slow-work.h +++ b/include/linux/slow-work.h @@ -67,7 +67,7 @@ static inline void slow_work_init(struct slow_work *work, } /** - * slow_work_init - Initialise a very slow work item + * vslow_work_init - Initialise a very slow work item * @work: The work item to initialise * @ops: The operations to use to handle the slow work item * -- cgit v1.2.3 From d4d5291c8cd499b1b590336059d5cc3e24c1ced6 Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Tue, 21 Apr 2009 13:32:54 -0700 Subject: driver synchronization: make scsi_wait_scan more advanced There is currently only one way for userspace to say "wait for my storage device to get ready for the modules I just loaded": to load the scsi_wait_scan module. Expectations of userspace are that once this module is loaded, all the (storage) devices for which the drivers were loaded before the module load are present. Now, there are some issues with the implementation, and the async stuff got caught in the middle of this: The existing code only waits for the scsy async probing to finish, but it did not take into account at all that probing might not have begun yet. (Russell ran into this problem on his computer and the fix works for him) This patch fixes this more thoroughly than the previous "fix", which had some bad side effects (namely, for kernel code that wanted to wait for the scsi scan it would also do an async sync, which would deadlock if you did it from async context already.. there's a report about that on lkml): The patch makes the module first wait for all device driver probes, and then it will wait for the scsi parallel scan to finish. Signed-off-by: Arjan van de Ven Tested-by: Russell King Signed-off-by: Linus Torvalds --- drivers/base/dd.c | 1 + drivers/scsi/scsi_scan.c | 2 -- drivers/scsi/scsi_wait_scan.c | 11 +++++++++++ include/linux/device.h | 1 + 4 files changed, 13 insertions(+), 2 deletions(-) diff --git a/drivers/base/dd.c b/drivers/base/dd.c index f17c3266a0e..742cbe6b042 100644 --- a/drivers/base/dd.c +++ b/drivers/base/dd.c @@ -179,6 +179,7 @@ void wait_for_device_probe(void) wait_event(probe_waitqueue, atomic_read(&probe_count) == 0); async_synchronize_full(); } +EXPORT_SYMBOL_GPL(wait_for_device_probe); /** * driver_probe_device - attempt to bind device & driver together diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c index a14d245a66b..6f51ca485f3 100644 --- a/drivers/scsi/scsi_scan.c +++ b/drivers/scsi/scsi_scan.c @@ -180,8 +180,6 @@ int scsi_complete_async_scans(void) spin_unlock(&async_scan_lock); kfree(data); - /* Synchronize async operations globally */ - async_synchronize_full(); return 0; } diff --git a/drivers/scsi/scsi_wait_scan.c b/drivers/scsi/scsi_wait_scan.c index 2f21af21269..74708fcaf82 100644 --- a/drivers/scsi/scsi_wait_scan.c +++ b/drivers/scsi/scsi_wait_scan.c @@ -11,10 +11,21 @@ */ #include +#include #include static int __init wait_scan_init(void) { + /* + * First we need to wait for device probing to finish; + * the drivers we just loaded might just still be probing + * and might not yet have reached the scsi async scanning + */ + wait_for_device_probe(); + /* + * and then we wait for the actual asynchronous scsi scan + * to finish. + */ scsi_complete_async_scans(); return 0; } diff --git a/include/linux/device.h b/include/linux/device.h index 2918c0e8fdf..6a69caaac18 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -551,6 +551,7 @@ extern int (*platform_notify_remove)(struct device *dev); extern struct device *get_device(struct device *dev); extern void put_device(struct device *dev); +extern void wait_for_device_probe(void); /* drivers/base/power/shutdown.c */ extern void device_shutdown(void); -- cgit v1.2.3 From 091069740304c979f957ceacec39c461d0192158 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Apr 2009 20:07:00 -0700 Subject: Linux 2.6.30-rc3 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 6f4208ff2d1..9e5dc8f0ef4 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 30 -EXTRAVERSION = -rc2 +EXTRAVERSION = -rc3 NAME = Temporary Tasmanian Devil # *DOCUMENTATION* -- cgit v1.2.3 From 592578a1dd1be0c940e36f769acdd3cc6651a7a1 Mon Sep 17 00:00:00 2001 From: Richard Retanubun Date: Wed, 8 Apr 2009 11:51:27 +1000 Subject: m68knommu: Fixed GPIO pin initialization for CONFIG_M5271 FEC. This processor only have one FEC and its MDIO pins are located at a different offset than the code used for the current CONFIG_M527x. Tesed on M5271EVB eval platform. Without this patch the FEC driver will report no PHY attached if the bootloader does not pre-initialize the PAR_FECI2C GPIO register. Signed-off-by: Richard Retanubun Signed-off-by: Greg Ungerer --- arch/m68knommu/platform/527x/config.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/m68knommu/platform/527x/config.c b/arch/m68knommu/platform/527x/config.c index 49343fb157b..428b15922ef 100644 --- a/arch/m68knommu/platform/527x/config.c +++ b/arch/m68knommu/platform/527x/config.c @@ -189,10 +189,15 @@ static void __init m527x_fec_init(void) m527x_fec_irq_init(0); /* Set multi-function pins to ethernet mode for fec0 */ +#if defined(CONFIG_M5271) + v = readb(MCF_IPSBAR + 0x100047); + writeb(v | 0xf0, MCF_IPSBAR + 0x100047); +#else par = readw(MCF_IPSBAR + 0x100082); writew(par | 0xf00, MCF_IPSBAR + 0x100082); v = readb(MCF_IPSBAR + 0x100078); writeb(v | 0xc0, MCF_IPSBAR + 0x100078); +#endif #ifdef CONFIG_FEC2 m527x_fec_irq_init(1); -- cgit v1.2.3 From a14f5e4feb3efd907df7f1b176c2367910a8e796 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Fri, 17 Apr 2009 22:55:06 +1000 Subject: m68knommu: fix missing .data.cacheline_aligned section Add a .data.cacheline_aligned section to the data segment. Signed-off-by: Greg Ungerer --- arch/m68knommu/kernel/vmlinux.lds.S | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/m68knommu/kernel/vmlinux.lds.S b/arch/m68knommu/kernel/vmlinux.lds.S index 69ba9b10767..b7fe505e358 100644 --- a/arch/m68knommu/kernel/vmlinux.lds.S +++ b/arch/m68knommu/kernel/vmlinux.lds.S @@ -147,6 +147,8 @@ SECTIONS { . = ALIGN(4); _sdata = . ; DATA_DATA + . = ALIGN(32); + *(.data.cacheline_aligned) . = ALIGN(8192) ; *(.data.init_task) _edata = . ; -- cgit v1.2.3 From 830c072b1ea0078396c42db120452fc36516ed1d Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Fri, 17 Apr 2009 22:56:50 +1000 Subject: m68knommu: remove unused kernel stats offsets The irq field of the kernel stats struct is not used by the assembly support code, so remove it from the offsets. Signed-off-by: Greg Ungerer --- arch/m68knommu/kernel/asm-offsets.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/arch/m68knommu/kernel/asm-offsets.c b/arch/m68knommu/kernel/asm-offsets.c index c785d07c02c..f500dd6935d 100644 --- a/arch/m68knommu/kernel/asm-offsets.c +++ b/arch/m68knommu/kernel/asm-offsets.c @@ -30,9 +30,6 @@ int main(void) DEFINE(TASK_MM, offsetof(struct task_struct, mm)); DEFINE(TASK_ACTIVE_MM, offsetof(struct task_struct, active_mm)); - /* offsets into the kernel_stat struct */ - DEFINE(STAT_IRQ, offsetof(struct kernel_stat, irqs)); - /* offsets into the irq_cpustat_t struct */ DEFINE(CPUSTAT_SOFTIRQ_PENDING, offsetof(irq_cpustat_t, __softirq_pending)); @@ -69,9 +66,6 @@ int main(void) DEFINE(PT_VECTOR, offsetof(struct pt_regs, pc) + 4); #endif - /* offsets into the kernel_stat struct */ - DEFINE(STAT_IRQ, offsetof(struct kernel_stat, irqs)); - /* signal defines */ DEFINE(SIGSEGV, SIGSEGV); DEFINE(SEGV_MAPERR, SEGV_MAPERR); -- cgit v1.2.3 From ec40f95db753d3bfdbcc43b1505ecf7980cb6492 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Fri, 17 Apr 2009 23:11:38 +1000 Subject: m68knommu: fix DMA support for ColdFire ColdFire CPU family members support DMA (all those with the FEC ethernet core use it, the rest have dedicated DMA engines). The code support is just missing a handful of routines for it to be usable by drivers. Add the missing dma_ functions. Signed-off-by: Greg Ungerer --- arch/m68knommu/Kconfig | 1 + arch/m68knommu/kernel/dma.c | 37 ++++++++++++++++++++++++++++++++++--- 2 files changed, 35 insertions(+), 3 deletions(-) diff --git a/arch/m68knommu/Kconfig b/arch/m68knommu/Kconfig index 4beb59dfc6e..534376299a9 100644 --- a/arch/m68knommu/Kconfig +++ b/arch/m68knommu/Kconfig @@ -16,6 +16,7 @@ config MMU config NO_DMA bool + depends on !COLDFIRE default y config FPU diff --git a/arch/m68knommu/kernel/dma.c b/arch/m68knommu/kernel/dma.c index 93612580663..aaf38bbbb6c 100644 --- a/arch/m68knommu/kernel/dma.c +++ b/arch/m68knommu/kernel/dma.c @@ -7,10 +7,9 @@ #include #include -#include #include #include -#include +#include void *dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t gfp) @@ -36,7 +35,39 @@ void dma_free_coherent(struct device *dev, size_t size, free_pages((unsigned long)vaddr, get_order(size)); } -void dma_sync_single_for_cpu(struct device *dev, dma_addr_t handle, size_t size, enum dma_data_direction dir) +void dma_sync_single_for_device(struct device *dev, dma_addr_t handle, + size_t size, enum dma_data_direction dir) { + switch (dir) { + case DMA_TO_DEVICE: + flush_dcache_range(handle, size); + break; + case DMA_FROM_DEVICE: + /* Should be clear already */ + break; + default: + if (printk_ratelimit()) + printk("dma_sync_single_for_device: unsupported dir %u\n", dir); + break; + } +} + +EXPORT_SYMBOL(dma_sync_single_for_device); +dma_addr_t dma_map_single(struct device *dev, void *addr, size_t size, + enum dma_data_direction dir) +{ + dma_addr_t handle = virt_to_phys(addr); + flush_dcache_range(handle, size); + return handle; } +EXPORT_SYMBOL(dma_map_single); +dma_addr_t dma_map_page(struct device *dev, struct page *page, + unsigned long offset, size_t size, + enum dma_data_direction dir) +{ + dma_addr_t handle = page_to_phys(page) + offset; + dma_sync_single_for_device(dev, handle, size, dir); + return handle; +} +EXPORT_SYMBOL(dma_map_page); -- cgit v1.2.3 From 24f1ce803c55f645429e6a7dd94763fbace84b0a Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Thu, 16 Apr 2009 04:47:32 +0000 Subject: powerpc: Fix crash on CPU hotplug early_init_mmu_secondary() is called at CPU hotplug time, so it must be marked as __cpuinit, not __init. Caused by 757c74d2 ("powerpc/mm: Introduce early_init_mmu() on 64-bit"). Tested-by: Sachin Sant Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras --- arch/powerpc/mm/hash_utils_64.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c index db556d25c3a..1ade7eb6ae0 100644 --- a/arch/powerpc/mm/hash_utils_64.c +++ b/arch/powerpc/mm/hash_utils_64.c @@ -753,7 +753,7 @@ void __init early_init_mmu(void) } #ifdef CONFIG_SMP -void __init early_init_mmu_secondary(void) +void __cpuinit early_init_mmu_secondary(void) { /* Initialize hash table for that CPU */ if (!firmware_has_feature(FW_FEATURE_LPAR)) -- cgit v1.2.3 From 59e4c3a2fe9cb1681bb2cff508ff79466f7585ba Mon Sep 17 00:00:00 2001 From: Andreas Schwab Date: Thu, 16 Apr 2009 06:22:01 +0000 Subject: powerpc/32: Don't clobber personality flags on exec Now that ppc32 implements address randomization it also wants to inherit personality flags like ADDR_NO_RANDOMIZE across exec, for things like `setarch ppc -R' to work. But the ppc32 version of SET_PERSONALITY forcefully sets PER_LINUX, clearing all personality flags. So be careful about preserving the flags. Signed-off-by: Andreas Schwab Signed-off-by: Paul Mackerras --- arch/powerpc/include/asm/elf.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/include/asm/elf.h b/arch/powerpc/include/asm/elf.h index 1a856b15226..087c22f1d36 100644 --- a/arch/powerpc/include/asm/elf.h +++ b/arch/powerpc/include/asm/elf.h @@ -258,7 +258,8 @@ do { \ # define elf_read_implies_exec(ex, exec_stk) (test_thread_flag(TIF_32BIT) ? \ (exec_stk != EXSTACK_DISABLE_X) : 0) #else -# define SET_PERSONALITY(ex) set_personality(PER_LINUX) +# define SET_PERSONALITY(ex) \ + set_personality(PER_LINUX | (current->personality & (~PER_MASK))) #endif /* __powerpc64__ */ extern int dcache_bsize; -- cgit v1.2.3 From 0d3b2ab6be1500041e11059bee97e83da9da28cc Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Thu, 16 Apr 2009 09:05:38 +0000 Subject: powerpc/ps3: Fix CONFIG_PS3_FLASH=n build warning Fix build warnings like these when CONFIG_PS3_FLASH=n: arch/powerpc/platforms/ps3/os-area.c: warning: 'update_flash_db' defined but not used Signed-off-by: Geoff Levand Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/ps3/os-area.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/platforms/ps3/os-area.c b/arch/powerpc/platforms/ps3/os-area.c index 86e392b1b04..cf1cd0f8c18 100644 --- a/arch/powerpc/platforms/ps3/os-area.c +++ b/arch/powerpc/platforms/ps3/os-area.c @@ -578,7 +578,7 @@ static void os_area_db_init(struct os_area_db *db) * */ -static void update_flash_db(void) +static void __maybe_unused update_flash_db(void) { int result; int file; -- cgit v1.2.3 From fec629b827335154366ecd8b38f007d649338fb3 Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Thu, 16 Apr 2009 09:05:40 +0000 Subject: maintainers: Fix PS3 patterns Correct the MAINTAINERS file patterns for PS3. Removes some PS3 patterns that were under 'CELL BROADBAND ENGINE ARCHITECTURE', and adds missing PS3 sound and RTC driver patterns. CC: Arnd Bergmann Signed-off-by: Geoff Levand Signed-off-by: Paul Mackerras --- MAINTAINERS | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 0cb20d82169..e133ba4de41 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1280,12 +1280,9 @@ L: cbe-oss-dev@ozlabs.org W: http://www.ibm.com/developerworks/power/cell/ S: Supported F: arch/powerpc/include/asm/cell*.h -F: arch/powerpc/include/asm/lv1call.h -F: arch/powerpc/include/asm/ps3*.h F: arch/powerpc/include/asm/spu*.h F: arch/powerpc/oprofile/*cell* F: arch/powerpc/platforms/cell/ -F: arch/powerpc/platforms/ps3/ CERTIFIED WIRELESS USB (WUSB) SUBSYSTEM: P: David Vrabel @@ -4441,7 +4438,9 @@ F: arch/powerpc/include/asm/ps3*.h F: arch/powerpc/platforms/ps3/ F: drivers/*/ps3* F: drivers/ps3/ +F: drivers/rtc/rtc-ps3.c F: drivers/usb/host/*ps3.c +F: sound/ppc/snd_ps3* PS3VRAM DRIVER P: Jim Paris -- cgit v1.2.3 From bcd71fe6b1a8694747b0b451c9ec22d813ad7e27 Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Fri, 17 Apr 2009 00:15:13 +0000 Subject: powerpc: Make macintosh/mediabay driver depend on CONFIG_BLOCK Fixes this build error: In file included from drivers/macintosh/mediabay.c:21: include/linux/ide.h:605: error: field 'request_sense_rq' has incomplete type Signed-off-by: Alexander Beregalov Signed-off-by: Paul Mackerras --- drivers/macintosh/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig index 173cf55c64d..3d906833948 100644 --- a/drivers/macintosh/Kconfig +++ b/drivers/macintosh/Kconfig @@ -123,7 +123,7 @@ config PMAC_APM_EMU config PMAC_MEDIABAY bool "Support PowerBook hotswap media bay" - depends on PPC_PMAC && PPC32 + depends on PPC_PMAC && PPC32 && BLOCK help This option adds support for older PowerBook's hotswap media bay that can contains batteries, floppy drives, or IDE devices. PCI -- cgit v1.2.3 From 2d6b3de2374dd8c9f5ab23d57c7bbcda08553356 Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Fri, 17 Apr 2009 06:36:37 +0000 Subject: powerpc/pasemi: Fix build error on UP MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit A non-SMP version of smp_send_stop() is now included in smp.h. Remove the unneeded definition in the pasemi setup.c. Fixes build errors like these when CONFIG_SMP=n: arch/powerpc/platforms/pasemi/setup.c:48: error: redefinition of ‘smp_send_stop’ include/linux/smp.h:125: error: previous definition of 'smp_send_stop' was here Reported-by: subrata@linux.vnet.ibm.com Signed-off-by: Geoff Levand Acked-by: Olof Johansson Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/pasemi/setup.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/arch/powerpc/platforms/pasemi/setup.c b/arch/powerpc/platforms/pasemi/setup.c index c64fb5bfb37..153051eb6d9 100644 --- a/arch/powerpc/platforms/pasemi/setup.c +++ b/arch/powerpc/platforms/pasemi/setup.c @@ -44,10 +44,6 @@ #include "pasemi.h" -#if !defined(CONFIG_SMP) -static void smp_send_stop(void) {} -#endif - /* SDC reset register, must be pre-mapped at reset time */ static void __iomem *reset_reg; -- cgit v1.2.3 From 6329db8bd60fbc0832f30c350b0181b8d865573e Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 21 Apr 2009 09:04:37 +0000 Subject: powerpc: Fix modular build of ide-pmac when mediabay is built in MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Now that the powermac IDE host driver can be modular, we need to export check_media_bay_by_base() and media_bay_set_ide_infos() from drivers/macintosh/mediabay.c for it. This fixes the following build error: > CC [M] drivers/ide/pmac.o > drivers/ide/pmac.c: In function ‘pmac_ide_init_dev’: > drivers/ide/pmac.c:955: error: implicit declaration of function > ‘check_media_bay_by_base’ > drivers/ide/pmac.c: In function ‘pmac_ide_setup_device’: > drivers/ide/pmac.c:1090: error: implicit declaration of function > ‘media_bay_set_ide_infos’ > make[2]: *** [drivers/ide/pmac.o] Error 1 > make[1]: *** [drivers/ide] Error 2 > make: *** [drivers] Error 2 Reported-by: Subrata Modak Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Paul Mackerras --- drivers/macintosh/mediabay.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/macintosh/mediabay.c b/drivers/macintosh/mediabay.c index d7e46d345d9..cf02188a90a 100644 --- a/drivers/macintosh/mediabay.c +++ b/drivers/macintosh/mediabay.c @@ -447,6 +447,7 @@ int check_media_bay_by_base(unsigned long base, int what) return -ENODEV; } +EXPORT_SYMBOL_GPL(check_media_bay_by_base); int media_bay_set_ide_infos(struct device_node* which_bay, unsigned long base, int irq, ide_hwif_t *hwif) @@ -486,6 +487,7 @@ int media_bay_set_ide_infos(struct device_node* which_bay, unsigned long base, return -ENODEV; } +EXPORT_SYMBOL_GPL(media_bay_set_ide_infos); #endif /* CONFIG_BLK_DEV_IDE_PMAC */ static void media_bay_step(int i) -- cgit v1.2.3 From 23c560a99d78bddf5c251bfa97bce19e4da4b3f3 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 15 Apr 2009 22:10:23 +0900 Subject: scatterlist: make sure sg_miter_next() doesn't return 0 sized mappings Impact: fix not-so-critical but annoying bug sg_miter_next() returns 0 sized mapping if there is an zero sized sg entry in the list or at the end of each iteration. As the users always check the ->length field, this bug shouldn't be critical other than causing unnecessary iteration. Fix it. Signed-off-by: Tejun Heo Signed-off-by: Jens Axboe --- lib/scatterlist.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/lib/scatterlist.c b/lib/scatterlist.c index b7b449dafbe..a295e404e90 100644 --- a/lib/scatterlist.c +++ b/lib/scatterlist.c @@ -347,9 +347,12 @@ bool sg_miter_next(struct sg_mapping_iter *miter) sg_miter_stop(miter); /* get to the next sg if necessary. __offset is adjusted by stop */ - if (miter->__offset == miter->__sg->length && --miter->__nents) { - miter->__sg = sg_next(miter->__sg); - miter->__offset = 0; + while (miter->__offset == miter->__sg->length) { + if (--miter->__nents) { + miter->__sg = sg_next(miter->__sg); + miter->__offset = 0; + } else + return false; } /* map the next page */ -- cgit v1.2.3 From 25636e282fe95508cae96bb27f86407aef935817 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 15 Apr 2009 22:10:24 +0900 Subject: block: fix SG_IO vector request data length handling Impact: fix SG_IO behavior such that it matches the documentation SG_IO howto says that if ->dxfer_len and sum of iovec disagress, the shorter one wins. However, the current implementation returns -EINVAL for such cases. Trim iovc if it's longer than ->dxfer_len. This patch uses iov_*() helpers which take struct iovec * by casting struct sg_iovec * to it. sg_iovec is always identical to iovec and this will be further cleaned up with later patches. Signed-off-by: Tejun Heo Signed-off-by: Jens Axboe --- block/scsi_ioctl.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/block/scsi_ioctl.c b/block/scsi_ioctl.c index 84b7f8709f4..82a0ca2f672 100644 --- a/block/scsi_ioctl.c +++ b/block/scsi_ioctl.c @@ -290,6 +290,7 @@ static int sg_io(struct request_queue *q, struct gendisk *bd_disk, if (hdr->iovec_count) { const int size = sizeof(struct sg_iovec) * hdr->iovec_count; + size_t iov_data_len; struct sg_iovec *iov; iov = kmalloc(size, GFP_KERNEL); @@ -304,8 +305,18 @@ static int sg_io(struct request_queue *q, struct gendisk *bd_disk, goto out; } + /* SG_IO howto says that the shorter of the two wins */ + iov_data_len = iov_length((struct iovec *)iov, + hdr->iovec_count); + if (hdr->dxfer_len < iov_data_len) { + hdr->iovec_count = iov_shorten((struct iovec *)iov, + hdr->iovec_count, + hdr->dxfer_len); + iov_data_len = hdr->dxfer_len; + } + ret = blk_rq_map_user_iov(q, rq, NULL, iov, hdr->iovec_count, - hdr->dxfer_len, GFP_KERNEL); + iov_data_len, GFP_KERNEL); kfree(iov); } else if (hdr->dxfer_len) ret = blk_rq_map_user(q, rq, NULL, hdr->dxferp, hdr->dxfer_len, -- cgit v1.2.3 From cd0aca2d550f238d80ba58e7dcade4ea3d0a3aa7 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 15 Apr 2009 22:10:25 +0900 Subject: block: fix queue bounce limit setting Impact: don't set GFP_DMA in q->bounce_gfp unnecessarily All DMA address limits are expressed in terms of the last addressable unit (byte or page) instead of one plus that. However, when determining bounce_gfp for 64bit machines in blk_queue_bounce_limit(), it compares the specified limit against 0x100000000UL to determine whether it's below 4G ending up falsely setting GFP_DMA in q->bounce_gfp. As DMA zone is very small on x86_64, this makes larger SG_IO transfers very eager to trigger OOM killer. Fix it. While at it, rename the parameter to @dma_mask for clarity and convert comment to proper winged style. Signed-off-by: Tejun Heo Signed-off-by: Jens Axboe --- block/blk-settings.c | 20 +++++++++++--------- 1 file changed, 11 insertions(+), 9 deletions(-) diff --git a/block/blk-settings.c b/block/blk-settings.c index 69c42adde52..57af728d94b 100644 --- a/block/blk-settings.c +++ b/block/blk-settings.c @@ -156,26 +156,28 @@ EXPORT_SYMBOL(blk_queue_make_request); /** * blk_queue_bounce_limit - set bounce buffer limit for queue - * @q: the request queue for the device - * @dma_addr: bus address limit + * @q: the request queue for the device + * @dma_mask: the maximum address the device can handle * * Description: * Different hardware can have different requirements as to what pages * it can do I/O directly to. A low level driver can call * blk_queue_bounce_limit to have lower memory pages allocated as bounce - * buffers for doing I/O to pages residing above @dma_addr. + * buffers for doing I/O to pages residing above @dma_mask. **/ -void blk_queue_bounce_limit(struct request_queue *q, u64 dma_addr) +void blk_queue_bounce_limit(struct request_queue *q, u64 dma_mask) { - unsigned long b_pfn = dma_addr >> PAGE_SHIFT; + unsigned long b_pfn = dma_mask >> PAGE_SHIFT; int dma = 0; q->bounce_gfp = GFP_NOIO; #if BITS_PER_LONG == 64 - /* Assume anything <= 4GB can be handled by IOMMU. - Actually some IOMMUs can handle everything, but I don't - know of a way to test this here. */ - if (b_pfn < (min_t(u64, 0x100000000UL, BLK_BOUNCE_HIGH) >> PAGE_SHIFT)) + /* + * Assume anything <= 4GB can be handled by IOMMU. Actually + * some IOMMUs can handle everything, but I don't know of a + * way to test this here. + */ + if (b_pfn < (min_t(u64, 0xffffffffUL, BLK_BOUNCE_HIGH) >> PAGE_SHIFT)) dma = 1; q->bounce_pfn = max_low_pfn; #else -- cgit v1.2.3 From 451a9ebf653d28337ba53ed5b4b70b0b9543cca1 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 15 Apr 2009 19:50:51 +0200 Subject: bio: fix bio_kmalloc() Impact: fix bio_kmalloc() and its destruction path bio_kmalloc() was broken in two ways. * bvec_alloc_bs() first allocates bvec using kmalloc() and then ignores it and allocates again like non-kmalloc bvecs. * bio_kmalloc_destructor() didn't check for and free bio integrity data. This patch fixes the above problems. kmalloc patch is separated out from bio_alloc_bioset() and allocates the requested number of bvecs as inline bvecs. * bio_alloc_bioset() no longer takes NULL @bs. None other than bio_kmalloc() used it and outside users can't know how it was allocated anyway. * Define and use BIO_POOL_NONE so that pool index check in bvec_free_bs() triggers if inline or kmalloc allocated bvec gets there. * Relocate destructors on top of each allocation function so that how they're used is more clear. Jens Axboe suggested allocating bvecs inline. Signed-off-by: Tejun Heo Signed-off-by: Jens Axboe --- fs/bio.c | 118 ++++++++++++++++++++++++---------------------------- include/linux/bio.h | 1 + 2 files changed, 55 insertions(+), 64 deletions(-) diff --git a/fs/bio.c b/fs/bio.c index cd42bb882f3..d35588fd6d5 100644 --- a/fs/bio.c +++ b/fs/bio.c @@ -174,14 +174,6 @@ struct bio_vec *bvec_alloc_bs(gfp_t gfp_mask, int nr, unsigned long *idx, { struct bio_vec *bvl; - /* - * If 'bs' is given, lookup the pool and do the mempool alloc. - * If not, this is a bio_kmalloc() allocation and just do a - * kzalloc() for the exact number of vecs right away. - */ - if (!bs) - bvl = kmalloc(nr * sizeof(struct bio_vec), gfp_mask); - /* * see comment near bvec_array define! */ @@ -260,21 +252,6 @@ void bio_free(struct bio *bio, struct bio_set *bs) mempool_free(p, bs->bio_pool); } -/* - * default destructor for a bio allocated with bio_alloc_bioset() - */ -static void bio_fs_destructor(struct bio *bio) -{ - bio_free(bio, fs_bio_set); -} - -static void bio_kmalloc_destructor(struct bio *bio) -{ - if (bio_has_allocated_vec(bio)) - kfree(bio->bi_io_vec); - kfree(bio); -} - void bio_init(struct bio *bio) { memset(bio, 0, sizeof(*bio)); @@ -301,21 +278,15 @@ void bio_init(struct bio *bio) **/ struct bio *bio_alloc_bioset(gfp_t gfp_mask, int nr_iovecs, struct bio_set *bs) { + unsigned long idx = BIO_POOL_NONE; struct bio_vec *bvl = NULL; - struct bio *bio = NULL; - unsigned long idx = 0; - void *p = NULL; - - if (bs) { - p = mempool_alloc(bs->bio_pool, gfp_mask); - if (!p) - goto err; - bio = p + bs->front_pad; - } else { - bio = kmalloc(sizeof(*bio), gfp_mask); - if (!bio) - goto err; - } + struct bio *bio; + void *p; + + p = mempool_alloc(bs->bio_pool, gfp_mask); + if (unlikely(!p)) + return NULL; + bio = p + bs->front_pad; bio_init(bio); @@ -332,22 +303,50 @@ struct bio *bio_alloc_bioset(gfp_t gfp_mask, int nr_iovecs, struct bio_set *bs) nr_iovecs = bvec_nr_vecs(idx); } +out_set: bio->bi_flags |= idx << BIO_POOL_OFFSET; bio->bi_max_vecs = nr_iovecs; -out_set: bio->bi_io_vec = bvl; - return bio; err_free: - if (bs) - mempool_free(p, bs->bio_pool); - else - kfree(bio); -err: + mempool_free(p, bs->bio_pool); return NULL; } +static void bio_fs_destructor(struct bio *bio) +{ + bio_free(bio, fs_bio_set); +} + +/** + * bio_alloc - allocate a new bio, memory pool backed + * @gfp_mask: allocation mask to use + * @nr_iovecs: number of iovecs + * + * Allocate a new bio with @nr_iovecs bvecs. If @gfp_mask + * contains __GFP_WAIT, the allocation is guaranteed to succeed. + * + * RETURNS: + * Pointer to new bio on success, NULL on failure. + */ +struct bio *bio_alloc(gfp_t gfp_mask, int nr_iovecs) +{ + struct bio *bio = bio_alloc_bioset(gfp_mask, nr_iovecs, fs_bio_set); + + if (bio) + bio->bi_destructor = bio_fs_destructor; + + return bio; +} + +static void bio_kmalloc_destructor(struct bio *bio) +{ + if (bio_integrity(bio)) + bio_integrity_free(bio); + kfree(bio); +} + /** * bio_alloc - allocate a bio for I/O * @gfp_mask: the GFP_ mask given to the slab allocator @@ -366,29 +365,20 @@ err: * do so can cause livelocks under memory pressure. * **/ -struct bio *bio_alloc(gfp_t gfp_mask, int nr_iovecs) -{ - struct bio *bio = bio_alloc_bioset(gfp_mask, nr_iovecs, fs_bio_set); - - if (bio) - bio->bi_destructor = bio_fs_destructor; - - return bio; -} - -/* - * Like bio_alloc(), but doesn't use a mempool backing. This means that - * it CAN fail, but while bio_alloc() can only be used for allocations - * that have a short (finite) life span, bio_kmalloc() should be used - * for more permanent bio allocations (like allocating some bio's for - * initalization or setup purposes). - */ struct bio *bio_kmalloc(gfp_t gfp_mask, int nr_iovecs) { - struct bio *bio = bio_alloc_bioset(gfp_mask, nr_iovecs, NULL); + struct bio *bio; - if (bio) - bio->bi_destructor = bio_kmalloc_destructor; + bio = kmalloc(sizeof(struct bio) + nr_iovecs * sizeof(struct bio_vec), + gfp_mask); + if (unlikely(!bio)) + return NULL; + + bio_init(bio); + bio->bi_flags |= BIO_POOL_NONE << BIO_POOL_OFFSET; + bio->bi_max_vecs = nr_iovecs; + bio->bi_io_vec = bio->bi_inline_vecs; + bio->bi_destructor = bio_kmalloc_destructor; return bio; } diff --git a/include/linux/bio.h b/include/linux/bio.h index b89cf2d8289..7b214fd672a 100644 --- a/include/linux/bio.h +++ b/include/linux/bio.h @@ -132,6 +132,7 @@ struct bio { * top 4 bits of bio flags indicate the pool this bio came from */ #define BIO_POOL_BITS (4) +#define BIO_POOL_NONE ((1UL << BIO_POOL_BITS) - 1) #define BIO_POOL_OFFSET (BITS_PER_LONG - BIO_POOL_BITS) #define BIO_POOL_MASK (1UL << BIO_POOL_OFFSET) #define BIO_POOL_IDX(bio) ((bio)->bi_flags >> BIO_POOL_OFFSET) -- cgit v1.2.3 From a9e9dc24bbc3e084450a22cf4fb82f5f5d4cbeea Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 15 Apr 2009 22:10:27 +0900 Subject: bio: use bio_kmalloc() in copy/map functions Impact: remove possible deadlock condition There is no reason to use mempool backed allocation for map functions. Also, because kern mapping is used inside LLDs (e.g. for EH), using mempool backed allocation can lead to deadlock under extreme conditions (mempool already consumed by the time a request reached EH and requests are blocked on EH). Switch copy/map functions to bio_kmalloc(). Signed-off-by: Tejun Heo Signed-off-by: Jens Axboe --- fs/bio.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/fs/bio.c b/fs/bio.c index d35588fd6d5..7bbc98f0eda 100644 --- a/fs/bio.c +++ b/fs/bio.c @@ -822,7 +822,7 @@ struct bio *bio_copy_user_iov(struct request_queue *q, return ERR_PTR(-ENOMEM); ret = -ENOMEM; - bio = bio_alloc(gfp_mask, nr_pages); + bio = bio_kmalloc(gfp_mask, nr_pages); if (!bio) goto out_bmd; @@ -946,7 +946,7 @@ static struct bio *__bio_map_user_iov(struct request_queue *q, if (!nr_pages) return ERR_PTR(-EINVAL); - bio = bio_alloc(gfp_mask, nr_pages); + bio = bio_kmalloc(gfp_mask, nr_pages); if (!bio) return ERR_PTR(-ENOMEM); @@ -1130,7 +1130,7 @@ static struct bio *__bio_map_kern(struct request_queue *q, void *data, int offset, i; struct bio *bio; - bio = bio_alloc(gfp_mask, nr_pages); + bio = bio_kmalloc(gfp_mask, nr_pages); if (!bio) return ERR_PTR(-ENOMEM); -- cgit v1.2.3 From 71982a409f12c50d011325a4471aa20666bb908d Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 17 Apr 2009 08:34:48 +0200 Subject: block: include empty disks in /proc/diskstats /proc/diskstats used to show stats for all disks whether they're zero-sized or not and their non-zero partitions. Commit 074a7aca7afa6f230104e8e65eba3420263714a5 accidentally changed the behavior such that it doesn't print out zero sized disks. This patch implements DISK_PITER_INCL_EMPTY_PART0 flag to partition iterator and uses it in diskstats_show() such that empty part0 is shown in /proc/diskstats. Reported and bisectd by Dianel Collins. Signed-off-by: Tejun Heo Reported-by: Daniel Collins Signed-off-by: Jens Axboe --- block/genhd.c | 12 ++++++++---- include/linux/genhd.h | 1 + 2 files changed, 9 insertions(+), 4 deletions(-) diff --git a/block/genhd.c b/block/genhd.c index a9ec910974c..1a4916e0173 100644 --- a/block/genhd.c +++ b/block/genhd.c @@ -98,7 +98,7 @@ void disk_part_iter_init(struct disk_part_iter *piter, struct gendisk *disk, if (flags & DISK_PITER_REVERSE) piter->idx = ptbl->len - 1; - else if (flags & DISK_PITER_INCL_PART0) + else if (flags & (DISK_PITER_INCL_PART0 | DISK_PITER_INCL_EMPTY_PART0)) piter->idx = 0; else piter->idx = 1; @@ -134,7 +134,8 @@ struct hd_struct *disk_part_iter_next(struct disk_part_iter *piter) /* determine iteration parameters */ if (piter->flags & DISK_PITER_REVERSE) { inc = -1; - if (piter->flags & DISK_PITER_INCL_PART0) + if (piter->flags & (DISK_PITER_INCL_PART0 | + DISK_PITER_INCL_EMPTY_PART0)) end = -1; else end = 0; @@ -150,7 +151,10 @@ struct hd_struct *disk_part_iter_next(struct disk_part_iter *piter) part = rcu_dereference(ptbl->part[piter->idx]); if (!part) continue; - if (!(piter->flags & DISK_PITER_INCL_EMPTY) && !part->nr_sects) + if (!part->nr_sects && + !(piter->flags & DISK_PITER_INCL_EMPTY) && + !(piter->flags & DISK_PITER_INCL_EMPTY_PART0 && + piter->idx == 0)) continue; get_device(part_to_dev(part)); @@ -1011,7 +1015,7 @@ static int diskstats_show(struct seq_file *seqf, void *v) "\n\n"); */ - disk_part_iter_init(&piter, gp, DISK_PITER_INCL_PART0); + disk_part_iter_init(&piter, gp, DISK_PITER_INCL_EMPTY_PART0); while ((hd = disk_part_iter_next(&piter))) { cpu = part_stat_lock(); part_round_stats(cpu, hd); diff --git a/include/linux/genhd.h b/include/linux/genhd.h index 634c53028fb..a1a28caed23 100644 --- a/include/linux/genhd.h +++ b/include/linux/genhd.h @@ -214,6 +214,7 @@ static inline void disk_put_part(struct hd_struct *part) #define DISK_PITER_REVERSE (1 << 0) /* iterate in the reverse direction */ #define DISK_PITER_INCL_EMPTY (1 << 1) /* include 0-sized parts */ #define DISK_PITER_INCL_PART0 (1 << 2) /* include partition 0 */ +#define DISK_PITER_INCL_EMPTY_PART0 (1 << 3) /* include empty partition 0 */ struct disk_part_iter { struct gendisk *disk; -- cgit v1.2.3 From b759113499d6c7cb75fab04f56772579308bc0f8 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Fri, 17 Apr 2009 08:36:50 +0200 Subject: block: make blk_abort_queue() ignore non-request based devices There's nothing to do for those devices, since the timeout handling is based on requests. Signed-off-by: Jens Axboe --- block/blk-timeout.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/block/blk-timeout.c b/block/blk-timeout.c index bbbdc4b8ccf..8f570c4c80e 100644 --- a/block/blk-timeout.c +++ b/block/blk-timeout.c @@ -211,6 +211,12 @@ void blk_abort_queue(struct request_queue *q) struct request *rq, *tmp; LIST_HEAD(list); + /* + * Not a request based block device, nothing to abort + */ + if (!q->request_fn) + return; + spin_lock_irqsave(q->queue_lock, flags); elv_abort_queue(q); -- cgit v1.2.3 From 4d00aa47e2337dcfe2d8a7215dbde3765b507167 Mon Sep 17 00:00:00 2001 From: Jeff Moyer Date: Tue, 21 Apr 2009 07:25:04 +0200 Subject: cfq-iosched: make seek_mean converge more quickly Right now, depending on the first sector to which a process issues I/O, the seek time may start out way out of whack. So make sure we start with 0 sectors in seek, instead of the offset of the first request issued. Signed-off-by: Jeff Moyer Signed-off-by: Jens Axboe --- block/cfq-iosched.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index 0d3b70de3d8..0eb4aff9df6 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -1908,7 +1908,9 @@ cfq_update_io_seektime(struct cfq_data *cfqd, struct cfq_io_context *cic, sector_t sdist; u64 total; - if (cic->last_request_pos < rq->sector) + if (!cic->last_request_pos) + sdist = 0; + else if (cic->last_request_pos < rq->sector) sdist = rq->sector - cic->last_request_pos; else sdist = cic->last_request_pos - rq->sector; -- cgit v1.2.3 From 04dc6e71a28d4815bf9431efcafc107bb0ad2792 Mon Sep 17 00:00:00 2001 From: Jeff Moyer Date: Tue, 21 Apr 2009 07:31:56 +0200 Subject: cfq-iosched: use the default seek distance when there aren't enough seek samples If the cfq io context doesn't have enough samples yet to provide a mean seek distance, then use the default threshold we have for seeky IO instead of defaulting to 0. Signed-off-by: Jeff Moyer Signed-off-by: Jens Axboe --- block/cfq-iosched.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index 0eb4aff9df6..7e13f04b5ed 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -947,14 +947,18 @@ static inline sector_t cfq_dist_from_last(struct cfq_data *cfqd, return cfqd->last_position - rq->sector; } +#define CIC_SEEK_THR 8 * 1024 +#define CIC_SEEKY(cic) ((cic)->seek_mean > CIC_SEEK_THR) + static inline int cfq_rq_close(struct cfq_data *cfqd, struct request *rq) { struct cfq_io_context *cic = cfqd->active_cic; + sector_t sdist = cic->seek_mean; if (!sample_valid(cic->seek_samples)) - return 0; + sdist = CIC_SEEK_THR; - return cfq_dist_from_last(cfqd, rq) <= cic->seek_mean; + return cfq_dist_from_last(cfqd, rq) <= sdist; } static struct cfq_queue *cfqq_close(struct cfq_data *cfqd, @@ -1039,9 +1043,6 @@ static struct cfq_queue *cfq_close_cooperator(struct cfq_data *cfqd, return cfqq; } - -#define CIC_SEEKY(cic) ((cic)->seek_mean > (8 * 1024)) - static void cfq_arm_slice_timer(struct cfq_data *cfqd) { struct cfq_queue *cfqq = cfqd->active_queue; -- cgit v1.2.3 From bbe188c8f16effd902d1ad391e06e41ce649b22e Mon Sep 17 00:00:00 2001 From: Ursula Braun Date: Tue, 21 Apr 2009 06:04:20 +0000 Subject: af_iucv: consider state IUCV_CLOSING when closing a socket Make sure a second invocation of iucv_sock_close() guarantees proper freeing of an iucv path. Signed-off-by: Ursula Braun Signed-off-by: David S. Miller --- net/iucv/af_iucv.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/iucv/af_iucv.c b/net/iucv/af_iucv.c index 49e786535dc..2941ee50393 100644 --- a/net/iucv/af_iucv.c +++ b/net/iucv/af_iucv.c @@ -172,6 +172,7 @@ static void iucv_sock_close(struct sock *sk) err = iucv_sock_wait_state(sk, IUCV_CLOSED, 0, timeo); } + case IUCV_CLOSING: /* fall through */ sk->sk_state = IUCV_CLOSED; sk->sk_state_change(sk); @@ -224,6 +225,8 @@ static struct sock *iucv_sock_alloc(struct socket *sock, int proto, gfp_t prio) spin_lock_init(&iucv_sk(sk)->message_q.lock); skb_queue_head_init(&iucv_sk(sk)->backlog_skb_q); iucv_sk(sk)->send_tag = 0; + iucv_sk(sk)->path = NULL; + memset(&iucv_sk(sk)->src_user_id , 0, 32); sk->sk_destruct = iucv_sock_destruct; sk->sk_sndtimeo = IUCV_CONN_TIMEOUT; -- cgit v1.2.3 From 60d3705fcbfe7deca8e94bc7ddecd6f9f1a4647e Mon Sep 17 00:00:00 2001 From: Hendrik Brueckner Date: Tue, 21 Apr 2009 06:04:21 +0000 Subject: af_iucv: fix oops in iucv_sock_recvmsg() for MSG_PEEK flag If iucv_sock_recvmsg() is called with MSG_PEEK flag set, the skb is enqueued twice. If the socket is then closed, the pointer to the skb is freed twice. Remove the skb_queue_head() call for MSG_PEEK, because the skb_recv_datagram() function already handles MSG_PEEK (does not dequeue the skb). Signed-off-by: Hendrik Brueckner Signed-off-by: Ursula Braun Signed-off-by: David S. Miller --- net/iucv/af_iucv.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/net/iucv/af_iucv.c b/net/iucv/af_iucv.c index 2941ee50393..42b3be302c5 100644 --- a/net/iucv/af_iucv.c +++ b/net/iucv/af_iucv.c @@ -814,6 +814,8 @@ static int iucv_sock_recvmsg(struct kiocb *iocb, struct socket *sock, target = sock_rcvlowat(sk, flags & MSG_WAITALL, len); + /* receive/dequeue next skb: + * the function understands MSG_PEEK and, thus, does not dequeue skb */ skb = skb_recv_datagram(sk, flags, noblock, &err); if (!skb) { if (sk->sk_shutdown & RCV_SHUTDOWN) @@ -861,9 +863,7 @@ static int iucv_sock_recvmsg(struct kiocb *iocb, struct socket *sock, iucv_process_message_q(sk); spin_unlock_bh(&iucv->message_q.lock); } - - } else - skb_queue_head(&sk->sk_receive_queue, skb); + } done: return err ? : copied; -- cgit v1.2.3 From fe86e54ef9465c97a16337d2a41a4cf486b937ae Mon Sep 17 00:00:00 2001 From: Hendrik Brueckner Date: Tue, 21 Apr 2009 06:04:22 +0000 Subject: af_iucv: Reject incoming msgs if RECV_SHUTDOWN is set Reject incoming iucv messages if the receive direction has been shut down. It avoids that the queue of outstanding messages increases and exceeds the message limit of the iucv communication path. Signed-off-by: Hendrik Brueckner Signed-off-by: Ursula Braun Signed-off-by: David S. Miller --- net/iucv/af_iucv.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/iucv/af_iucv.c b/net/iucv/af_iucv.c index 42b3be302c5..ee517108856 100644 --- a/net/iucv/af_iucv.c +++ b/net/iucv/af_iucv.c @@ -1116,8 +1116,10 @@ static void iucv_callback_rx(struct iucv_path *path, struct iucv_message *msg) struct sock_msg_q *save_msg; int len; - if (sk->sk_shutdown & RCV_SHUTDOWN) + if (sk->sk_shutdown & RCV_SHUTDOWN) { + iucv_message_reject(path, msg); return; + } if (!list_empty(&iucv->message_q.list) || !skb_queue_empty(&iucv->backlog_skb_q)) -- cgit v1.2.3 From e14ad5fa8705fb354e72312479abbe420ebc3f8e Mon Sep 17 00:00:00 2001 From: Hendrik Brueckner Date: Tue, 21 Apr 2009 06:04:23 +0000 Subject: af_iucv: Test additional sk states in iucv_sock_shutdown Add few more sk states in iucv_sock_shutdown(). Signed-off-by: Hendrik Brueckner Signed-off-by: Ursula Braun Signed-off-by: David S. Miller --- net/iucv/af_iucv.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/iucv/af_iucv.c b/net/iucv/af_iucv.c index ee517108856..9cfdaaddc5b 100644 --- a/net/iucv/af_iucv.c +++ b/net/iucv/af_iucv.c @@ -937,6 +937,9 @@ static int iucv_sock_shutdown(struct socket *sock, int how) lock_sock(sk); switch (sk->sk_state) { + case IUCV_DISCONN: + case IUCV_CLOSING: + case IUCV_SEVERED: case IUCV_CLOSED: err = -ENOTCONN; goto fail; -- cgit v1.2.3 From 3fa6b5adbe46b3d665267dee0f879858ab464f44 Mon Sep 17 00:00:00 2001 From: Hendrik Brueckner Date: Tue, 21 Apr 2009 06:04:24 +0000 Subject: af_iucv: Fix race when queuing incoming iucv messages AF_IUCV runs into a race when queuing incoming iucv messages and receiving the resulting backlog. If the Linux system is under pressure (high load or steal time), the message queue grows up, but messages are not received and queued onto the backlog queue. In that case, applications do not receive any data with recvmsg() even if AF_IUCV puts incoming messages onto the message queue. The race can be avoided if the message queue spinlock in the message_pending callback is spreaded across the entire callback function. Signed-off-by: Hendrik Brueckner Signed-off-by: Ursula Braun Signed-off-by: David S. Miller --- net/iucv/af_iucv.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/net/iucv/af_iucv.c b/net/iucv/af_iucv.c index 9cfdaaddc5b..b51c9187c34 100644 --- a/net/iucv/af_iucv.c +++ b/net/iucv/af_iucv.c @@ -1124,6 +1124,8 @@ static void iucv_callback_rx(struct iucv_path *path, struct iucv_message *msg) return; } + spin_lock(&iucv->message_q.lock); + if (!list_empty(&iucv->message_q.list) || !skb_queue_empty(&iucv->backlog_skb_q)) goto save_message; @@ -1137,9 +1139,8 @@ static void iucv_callback_rx(struct iucv_path *path, struct iucv_message *msg) if (!skb) goto save_message; - spin_lock(&iucv->message_q.lock); iucv_process_message(sk, skb, path, msg); - spin_unlock(&iucv->message_q.lock); + goto out_unlock; return; @@ -1150,8 +1151,9 @@ save_message: save_msg->path = path; save_msg->msg = *msg; - spin_lock(&iucv->message_q.lock); list_add_tail(&save_msg->list, &iucv->message_q.list); + +out_unlock: spin_unlock(&iucv->message_q.lock); } -- cgit v1.2.3 From c5505081cd734a409eb11e1f844b6bf5427a7925 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Wed, 22 Apr 2009 17:10:46 +1000 Subject: m68knommu: update the defconfig for the ColdFire 5208evb board Signed-off-by: Greg Ungerer --- arch/m68knommu/configs/m5208evb_defconfig | 163 +++++++++++++++++------------- 1 file changed, 93 insertions(+), 70 deletions(-) diff --git a/arch/m68knommu/configs/m5208evb_defconfig b/arch/m68knommu/configs/m5208evb_defconfig index 6fae33a05e2..854a4f333b2 100644 --- a/arch/m68knommu/configs/m5208evb_defconfig +++ b/arch/m68knommu/configs/m5208evb_defconfig @@ -1,6 +1,6 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc1 +# Linux kernel version: 2.6.30-rc2 # CONFIG_M68K=y # CONFIG_MMU is not set @@ -15,9 +15,10 @@ CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_TIME_LOW_RES=y +CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_NO_IOPORT=y -CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -33,53 +34,55 @@ CONFIG_LOCALVERSION_AUTO=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y -# CONFIG_UID16 is not set -# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -# CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set # CONFIG_EPOLL is not set # CONFIG_SIGNALFD is not set # CONFIG_TIMERFD is not set # CONFIG_EVENTFD is not set +# CONFIG_AIO is not set # CONFIG_VM_EVENT_COUNTERS is not set -CONFIG_SLAB=y -# CONFIG_SLUB is not set +# CONFIG_COMPAT_BRK is not set +# CONFIG_SLAB is not set +CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set -# CONFIG_HAVE_OPROFILE is not set -# CONFIG_HAVE_KPROBES is not set -# CONFIG_HAVE_KRETPROBES is not set -# CONFIG_HAVE_DMA_ATTRS is not set -CONFIG_SLABINFO=y -CONFIG_TINY_SHMEM=y +# CONFIG_SLOW_WORK is not set +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set +# CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -93,7 +96,7 @@ CONFIG_IOSCHED_NOOP=y # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" -CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Processor type and features @@ -145,44 +148,39 @@ CONFIG_RAM16BIT=y # CONFIG_ROM is not set CONFIG_RAMKERNEL=y # CONFIG_ROMKERNEL is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_VIRT_TO_BUS=y +# CONFIG_UNEVICTABLE_LRU is not set CONFIG_ISA_DMA_API=y -# -# Bus options (PCI, PCMCIA, EISA, MCA, ISA) -# -# CONFIG_PCI is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set - # # Executable file formats # CONFIG_BINFMT_FLAT=y # CONFIG_BINFMT_ZFLAT is not set # CONFIG_BINFMT_SHARED_FLAT is not set -# CONFIG_BINFMT_AOUT is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # # Power management options # # CONFIG_PM is not set - -# -# Networking -# CONFIG_NET=y # @@ -223,6 +221,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -232,7 +231,9 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -243,14 +244,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -289,10 +284,8 @@ CONFIG_MTD_BLOCK=y # # RAM/ROM/Flash chip drivers # -CONFIG_MTD_CFI=y +# CONFIG_MTD_CFI is not set # CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -# CONFIG_MTD_CFI_ADV_OPTIONS is not set CONFIG_MTD_MAP_BANK_WIDTH_1=y CONFIG_MTD_MAP_BANK_WIDTH_2=y CONFIG_MTD_MAP_BANK_WIDTH_4=y @@ -303,10 +296,6 @@ CONFIG_MTD_CFI_I1=y CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I4 is not set # CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_CFI_INTELEXT is not set -CONFIG_MTD_CFI_AMDSTD=y -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y CONFIG_MTD_RAM=y # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set @@ -315,7 +304,6 @@ CONFIG_MTD_RAM=y # Mapping drivers for chip access # # CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_PHYSMAP is not set CONFIG_MTD_UCLINUX=y # CONFIG_MTD_PLATRAM is not set @@ -336,6 +324,11 @@ CONFIG_MTD_UCLINUX=y # CONFIG_MTD_NAND is not set # CONFIG_MTD_ONENAND is not set +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + # # UBI - Unsorted block images # @@ -351,6 +344,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set # CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -364,7 +358,7 @@ CONFIG_HAVE_IDE=y # CONFIG_SCSI_NETLINK is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -374,10 +368,15 @@ CONFIG_NETDEVICES=y # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y # CONFIG_MII is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set CONFIG_FEC=y # CONFIG_FEC2 is not set @@ -389,8 +388,10 @@ CONFIG_FEC=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -415,7 +416,7 @@ CONFIG_FEC=y # Character devices # # CONFIG_VT is not set -# CONFIG_DEVKMEM is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -428,7 +429,6 @@ CONFIG_FEC=y # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_COLDFIRE is not set CONFIG_SERIAL_MCF=y CONFIG_SERIAL_MCF_BAUDRATE=115200 CONFIG_SERIAL_MCF_CONSOLE=y @@ -447,19 +447,23 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -470,11 +474,12 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set # # Multimedia drivers # -# CONFIG_DAB is not set +CONFIG_DAB=y # # Graphics support @@ -488,10 +493,6 @@ CONFIG_SSB_POSSIBLE=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set @@ -499,7 +500,10 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -507,11 +511,13 @@ CONFIG_SSB_POSSIBLE=y CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +# CONFIG_FILE_LOCKING is not set # CONFIG_XFS_FS is not set +# CONFIG_BTRFS_FS is not set # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set # CONFIG_QUOTA is not set @@ -519,6 +525,11 @@ CONFIG_EXT2_FS=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -540,10 +551,7 @@ CONFIG_PROC_SYSCTL=y # CONFIG_SYSFS is not set # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -553,13 +561,20 @@ CONFIG_PROC_SYSCTL=y # CONFIG_EFS_FS is not set # CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set CONFIG_ROMFS_FS=y +# CONFIG_ROMFS_BACKED_BY_BLOCK is not set +CONFIG_ROMFS_BACKED_BY_MTD=y +# CONFIG_ROMFS_BACKED_BY_BOTH is not set +CONFIG_ROMFS_ON_MTD=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set # CONFIG_NETWORK_FILESYSTEMS is not set # @@ -581,10 +596,14 @@ CONFIG_FRAME_WARN=1024 # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_SAMPLES is not set CONFIG_FULLDEBUG=y # CONFIG_HIGHPROFILE is not set -# CONFIG_BOOTPARAM is not set +CONFIG_BOOTPARAM=y +CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0" # CONFIG_NO_KERNEL_MSG is not set # CONFIG_BDM_DISABLE is not set @@ -592,19 +611,23 @@ CONFIG_FULLDEBUG=y # Security options # # CONFIG_KEYS is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_HAS_IOMEM=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y -- cgit v1.2.3 From f170ea24c218905f78791b15a6dcb3c99b730a60 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Wed, 22 Apr 2009 17:26:49 +1000 Subject: m68knommu: add a defconfig for the ColdFire M5272C3 board Signed-off-by: Greg Ungerer --- arch/m68knommu/configs/m5272c3_defconfig | 645 +++++++++++++++++++++++++++++++ 1 file changed, 645 insertions(+) create mode 100644 arch/m68knommu/configs/m5272c3_defconfig diff --git a/arch/m68knommu/configs/m5272c3_defconfig b/arch/m68knommu/configs/m5272c3_defconfig new file mode 100644 index 00000000000..f37852a3421 --- /dev/null +++ b/arch/m68knommu/configs/m5272c3_defconfig @@ -0,0 +1,645 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.30-rc2 +# Wed Apr 22 17:17:30 2009 +# +CONFIG_M68K=y +# CONFIG_MMU is not set +# CONFIG_FPU is not set +CONFIG_ZONE_DMA=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_TIME_LOW_RES=y +# CONFIG_GENERIC_CLOCKEVENTS is not set +CONFIG_NO_IOPORT=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +# CONFIG_SYSVIPC is not set +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +# CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_HOTPLUG is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +# CONFIG_FUTEX is not set +# CONFIG_EPOLL is not set +# CONFIG_SIGNALFD is not set +# CONFIG_TIMERFD is not set +# CONFIG_EVENTFD is not set +# CONFIG_AIO is not set +# CONFIG_VM_EVENT_COUNTERS is not set +# CONFIG_SLUB_DEBUG is not set +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +# CONFIG_SLOW_WORK is not set +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_BASE_SMALL=0 +# CONFIG_MODULES is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" +# CONFIG_FREEZER is not set + +# +# Processor type and features +# +# CONFIG_M68328 is not set +# CONFIG_M68EZ328 is not set +# CONFIG_M68VZ328 is not set +# CONFIG_M68360 is not set +# CONFIG_M5206 is not set +# CONFIG_M5206e is not set +# CONFIG_M520x is not set +# CONFIG_M523x is not set +# CONFIG_M5249 is not set +# CONFIG_M5271 is not set +CONFIG_M5272=y +# CONFIG_M5275 is not set +# CONFIG_M528x is not set +# CONFIG_M5307 is not set +# CONFIG_M532x is not set +# CONFIG_M5407 is not set +CONFIG_COLDFIRE=y +CONFIG_CLOCK_SET=y +CONFIG_CLOCK_FREQ=66666666 +CONFIG_CLOCK_DIV=1 + +# +# Platform +# +# CONFIG_UC5272 is not set +CONFIG_M5272C3=y +# CONFIG_COBRA5272 is not set +# CONFIG_CANCam is not set +# CONFIG_SCALES is not set +# CONFIG_NETtel is not set +# CONFIG_CPU16B is not set +# CONFIG_MOD5272 is not set +CONFIG_FREESCALE=y +CONFIG_4KSTACKS=y +CONFIG_HZ=100 + +# +# RAM configuration +# +CONFIG_RAMBASE=0x00000000 +CONFIG_RAMSIZE=0x00800000 +CONFIG_VECTORBASE=0x00000000 +CONFIG_KERNELBASE=0x00020000 +CONFIG_RAMAUTOBIT=y +# CONFIG_RAM8BIT is not set +# CONFIG_RAM16BIT is not set +# CONFIG_RAM32BIT is not set + +# +# ROM configuration +# +# CONFIG_ROM is not set +CONFIG_RAMKERNEL=y +# CONFIG_ROMKERNEL is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_VIRT_TO_BUS=y +# CONFIG_UNEVICTABLE_LRU is not set + +# +# Executable file formats +# +CONFIG_BINFMT_FLAT=y +# CONFIG_BINFMT_ZFLAT is not set +# CONFIG_BINFMT_SHARED_FLAT is not set +# CONFIG_HAVE_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_RAM=y +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_UCLINUX=y +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +# CONFIG_MII is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +CONFIG_FEC=y +# CONFIG_FEC2 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_SERIAL_MCF=y +CONFIG_SERIAL_MCF_BAUDRATE=19200 +CONFIG_SERIAL_MCF_CONSOLE=y +# CONFIG_UNIX98_PTYS is not set +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +# CONFIG_GEN_RTC is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +CONFIG_DAB=y + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_SOUND is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_FILE_LOCKING is not set +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_DNOTIFY is not set +# CONFIG_INOTIFY is not set +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +# CONFIG_TMPFS is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +CONFIG_ROMFS_FS=y +# CONFIG_ROMFS_BACKED_BY_BLOCK is not set +CONFIG_ROMFS_BACKED_BY_MTD=y +# CONFIG_ROMFS_BACKED_BY_BOTH is not set +CONFIG_ROMFS_ON_MTD=y +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set +# CONFIG_NETWORK_FILESYSTEMS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_NLS is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +# CONFIG_SAMPLES is not set +# CONFIG_FULLDEBUG is not set +# CONFIG_HIGHPROFILE is not set +CONFIG_BOOTPARAM=y +CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0" +# CONFIG_NO_KERNEL_MSG is not set +# CONFIG_BDM_DISABLE is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_HAS_IOMEM=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y -- cgit v1.2.3 From 3f9738f73ad08ef770df64f145007bd27ac2fa16 Mon Sep 17 00:00:00 2001 From: Jianjun kong Date: Mon, 20 Apr 2009 23:48:25 +0000 Subject: 8139too: fix HW initial flow While ifconfig eth0 up kernel calls open() of 8139 driver(8139too.c). In rtl8139_hw_start() of rtl8139_open(), 8139 driver enable RX before setting up the DMA buffer address. In this interval where RX was enabled and DMA buffer address is not yet set up, any incoming broadcast packet would be send to a strange physical address: 0x003e8800 which is the default value of DMA buffer address. Unfortunately, this address is used by Linux kernel. So kernel panics. This patch fix it by setting up DMA buffer address before RX enabled and everything is fine even under broadcast packets attack. Signed-off-by: Jonathan Lin Signed-off-by: Amos Kong Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- drivers/net/8139too.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c index 29df398b772..1fc45431a62 100644 --- a/drivers/net/8139too.c +++ b/drivers/net/8139too.c @@ -1383,6 +1383,11 @@ static void rtl8139_hw_start (struct net_device *dev) RTL_W32_F (MAC0 + 0, le32_to_cpu (*(__le32 *) (dev->dev_addr + 0))); RTL_W32_F (MAC0 + 4, le16_to_cpu (*(__le16 *) (dev->dev_addr + 4))); + tp->cur_rx = 0; + + /* init Rx ring buffer DMA address */ + RTL_W32_F (RxBuf, tp->rx_ring_dma); + /* Must enable Tx/Rx before setting transfer thresholds! */ RTL_W8 (ChipCmd, CmdRxEnb | CmdTxEnb); @@ -1390,8 +1395,6 @@ static void rtl8139_hw_start (struct net_device *dev) RTL_W32 (RxConfig, tp->rx_config); RTL_W32 (TxConfig, rtl8139_tx_config); - tp->cur_rx = 0; - rtl_check_media (dev, 1); if (tp->chipset >= CH_8139B) { @@ -1406,9 +1409,6 @@ static void rtl8139_hw_start (struct net_device *dev) /* Lock Config[01234] and BMCR register writes */ RTL_W8 (Cfg9346, Cfg9346_Lock); - /* init Rx ring buffer DMA address */ - RTL_W32_F (RxBuf, tp->rx_ring_dma); - /* init Tx buffer DMA addresses */ for (i = 0; i < NUM_TX_DESC; i++) RTL_W32_F (TxAddr0 + (i * 4), tp->tx_bufs_dma + (tp->tx_buf[i] - tp->tx_bufs)); -- cgit v1.2.3 From cef309cf6112f9a44b1ebcefc1641d01d35c83dc Mon Sep 17 00:00:00 2001 From: Heiko Schocher Date: Mon, 20 Apr 2009 22:36:43 +0000 Subject: ucc_geth.c: Fix upsmr setting in RMII mode If using the UCC on a MPC8360 in RMII mode, don;t set UCC_GETH_UPSMR_RPM bit in the upsmr register. Signed-off-by: Heiko Schocher Acked-by: Li Yang Signed-off-by: David S. Miller --- drivers/net/ucc_geth.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c index d3f39e86eb9..44f8392da11 100644 --- a/drivers/net/ucc_geth.c +++ b/drivers/net/ucc_geth.c @@ -1394,7 +1394,8 @@ static int adjust_enet_interface(struct ucc_geth_private *ugeth) (ugeth->phy_interface == PHY_INTERFACE_MODE_RGMII_RXID) || (ugeth->phy_interface == PHY_INTERFACE_MODE_RGMII_TXID) || (ugeth->phy_interface == PHY_INTERFACE_MODE_RTBI)) { - upsmr |= UCC_GETH_UPSMR_RPM; + if (ugeth->phy_interface != PHY_INTERFACE_MODE_RMII) + upsmr |= UCC_GETH_UPSMR_RPM; switch (ugeth->max_speed) { case SPEED_10: upsmr |= UCC_GETH_UPSMR_R10M; -- cgit v1.2.3 From 50b2ff1bc47baacb8e9882b2b2a74b240ddbeecf Mon Sep 17 00:00:00 2001 From: Paul Moore Date: Tue, 21 Apr 2009 10:04:22 +0000 Subject: netlabel: Always remove the correct address selector The NetLabel address selector mechanism has a problem where it can get mistakenly remove the wrong selector when similar addresses are used. The problem is caused when multiple addresses are configured that have different netmasks but the same address, e.g. 127.0.0.0/8 and 127.0.0.0/24. This patch fixes the problem. Reported-by: Etienne Basset Signed-off-by: Paul Moore Acked-by: James Morris Tested-by: Etienne Basset Signed-off-by: David S. Miller --- net/netlabel/netlabel_addrlist.c | 26 ++++++++++---------------- 1 file changed, 10 insertions(+), 16 deletions(-) diff --git a/net/netlabel/netlabel_addrlist.c b/net/netlabel/netlabel_addrlist.c index 834c6eb7f48..c0519139679 100644 --- a/net/netlabel/netlabel_addrlist.c +++ b/net/netlabel/netlabel_addrlist.c @@ -256,13 +256,11 @@ struct netlbl_af4list *netlbl_af4list_remove(__be32 addr, __be32 mask, { struct netlbl_af4list *entry; - entry = netlbl_af4list_search(addr, head); - if (entry != NULL && entry->addr == addr && entry->mask == mask) { - netlbl_af4list_remove_entry(entry); - return entry; - } - - return NULL; + entry = netlbl_af4list_search_exact(addr, mask, head); + if (entry == NULL) + return NULL; + netlbl_af4list_remove_entry(entry); + return entry; } #if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) @@ -299,15 +297,11 @@ struct netlbl_af6list *netlbl_af6list_remove(const struct in6_addr *addr, { struct netlbl_af6list *entry; - entry = netlbl_af6list_search(addr, head); - if (entry != NULL && - ipv6_addr_equal(&entry->addr, addr) && - ipv6_addr_equal(&entry->mask, mask)) { - netlbl_af6list_remove_entry(entry); - return entry; - } - - return NULL; + entry = netlbl_af6list_search_exact(addr, mask, head); + if (entry == NULL) + return NULL; + netlbl_af6list_remove_entry(entry); + return entry; } #endif /* IPv6 */ -- cgit v1.2.3 From cc29c70dd581f85ee7a3e7980fb031f90b90a2ab Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 22 Apr 2009 00:49:51 -0700 Subject: net/netrom: Fix socket locking Patch "af_rose/x25: Sanity check the maximum user frame size" (commit 83e0bbcbe2145f160fbaa109b0439dae7f4a38a9) from Alan Cox got locking wrong. If we bail out due to user frame size being too large, we must unlock the socket beforehand. Signed-off-by: Jean Delvare Signed-off-by: David S. Miller --- net/netrom/af_netrom.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/net/netrom/af_netrom.c b/net/netrom/af_netrom.c index 4e705f87969..3be0e016ab7 100644 --- a/net/netrom/af_netrom.c +++ b/net/netrom/af_netrom.c @@ -1084,8 +1084,10 @@ static int nr_sendmsg(struct kiocb *iocb, struct socket *sock, /* Build a packet - the conventional user limit is 236 bytes. We can do ludicrously large NetROM frames but must not overflow */ - if (len > 65536) - return -EMSGSIZE; + if (len > 65536) { + err = -EMSGSIZE; + goto out; + } SOCK_DEBUG(sk, "NET/ROM: sendto: building packet.\n"); size = len + NR_NETWORK_LEN + NR_TRANSPORT_LEN; -- cgit v1.2.3 From ae6e84596e7b321d9a08e81679c6a3f799634636 Mon Sep 17 00:00:00 2001 From: Tyler Hicks Date: Thu, 12 Mar 2009 00:19:46 -0500 Subject: eCryptfs: Copy lower inode attrs before dentry instantiation Copies the lower inode attributes to the upper inode before passing the upper inode to d_instantiate(). This is important for security_d_instantiate(). The problem was discovered by a user seeing SELinux denials like so: type=AVC msg=audit(1236812817.898:47): avc: denied { 0x100000 } for pid=3584 comm="httpd" name="testdir" dev=ecryptfs ino=943872 scontext=root:system_r:httpd_t:s0 tcontext=root:object_r:httpd_sys_content_t:s0 tclass=file Notice target class is file while testdir is really a directory, confusing the permission translation (0x100000) due to the wrong i_mode. Signed-off-by: Tyler Hicks --- fs/ecryptfs/main.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/fs/ecryptfs/main.c b/fs/ecryptfs/main.c index aed56c25539..7638b0a02c8 100644 --- a/fs/ecryptfs/main.c +++ b/fs/ecryptfs/main.c @@ -190,14 +190,14 @@ int ecryptfs_interpose(struct dentry *lower_dentry, struct dentry *dentry, init_special_inode(inode, lower_inode->i_mode, lower_inode->i_rdev); dentry->d_op = &ecryptfs_dops; - if (flags & ECRYPTFS_INTERPOSE_FLAG_D_ADD) - d_add(dentry, inode); - else - d_instantiate(dentry, inode); fsstack_copy_attr_all(inode, lower_inode, NULL); /* This size will be overwritten for real files w/ headers and * other metadata */ fsstack_copy_inode_size(inode, lower_inode); + if (flags & ECRYPTFS_INTERPOSE_FLAG_D_ADD) + d_add(dentry, inode); + else + d_instantiate(dentry, inode); out: return rc; } -- cgit v1.2.3 From 57ea34d19963781d05eb12f9b31bd4f70d61ec16 Mon Sep 17 00:00:00 2001 From: Tyler Hicks Date: Sun, 15 Mar 2009 14:17:01 -0500 Subject: eCryptfs: NULL pointer dereference in ecryptfs_send_miscdev() If data is NULL, msg_ctx->msg is set to NULL and then dereferenced afterwards. ecryptfs_send_raw_message() is the only place that ecryptfs_send_miscdev() is called with data being NULL, but the only caller of that function (ecryptfs_process_helo()) is never called. In short, there is currently no way to trigger the NULL pointer dereference. This patch removes the two unused functions and modifies ecryptfs_send_miscdev() to remove the NULL dereferences. Signed-off-by: Tyler Hicks --- fs/ecryptfs/messaging.c | 82 ------------------------------------------------- fs/ecryptfs/miscdev.c | 28 +++++++---------- 2 files changed, 11 insertions(+), 99 deletions(-) diff --git a/fs/ecryptfs/messaging.c b/fs/ecryptfs/messaging.c index 295e7fa5675..f1c17e87c5f 100644 --- a/fs/ecryptfs/messaging.c +++ b/fs/ecryptfs/messaging.c @@ -133,45 +133,6 @@ out: return rc; } -static int -ecryptfs_send_message_locked(char *data, int data_len, u8 msg_type, - struct ecryptfs_msg_ctx **msg_ctx); - -/** - * ecryptfs_send_raw_message - * @msg_type: Message type - * @daemon: Daemon struct for recipient of message - * - * A raw message is one that does not include an ecryptfs_message - * struct. It simply has a type. - * - * Must be called with ecryptfs_daemon_hash_mux held. - * - * Returns zero on success; non-zero otherwise - */ -static int ecryptfs_send_raw_message(u8 msg_type, - struct ecryptfs_daemon *daemon) -{ - struct ecryptfs_msg_ctx *msg_ctx; - int rc; - - rc = ecryptfs_send_message_locked(NULL, 0, msg_type, &msg_ctx); - if (rc) { - printk(KERN_ERR "%s: Error whilst attempting to send " - "message to ecryptfsd; rc = [%d]\n", __func__, rc); - goto out; - } - /* Raw messages are logically context-free (e.g., no - * reply is expected), so we set the state of the - * ecryptfs_msg_ctx object to indicate that it should - * be freed as soon as the message is sent. */ - mutex_lock(&msg_ctx->mux); - msg_ctx->state = ECRYPTFS_MSG_CTX_STATE_NO_REPLY; - mutex_unlock(&msg_ctx->mux); -out: - return rc; -} - /** * ecryptfs_spawn_daemon - Create and initialize a new daemon struct * @daemon: Pointer to set to newly allocated daemon struct @@ -211,49 +172,6 @@ out: return rc; } -/** - * ecryptfs_process_helo - * @euid: The user ID owner of the message - * @user_ns: The namespace in which @euid applies - * @pid: The process ID for the userspace program that sent the - * message - * - * Adds the euid and pid values to the daemon euid hash. If an euid - * already has a daemon pid registered, the daemon will be - * unregistered before the new daemon is put into the hash list. - * Returns zero after adding a new daemon to the hash list; - * non-zero otherwise. - */ -int ecryptfs_process_helo(uid_t euid, struct user_namespace *user_ns, - struct pid *pid) -{ - struct ecryptfs_daemon *new_daemon; - struct ecryptfs_daemon *old_daemon; - int rc; - - mutex_lock(&ecryptfs_daemon_hash_mux); - rc = ecryptfs_find_daemon_by_euid(&old_daemon, euid, user_ns); - if (rc != 0) { - printk(KERN_WARNING "Received request from user [%d] " - "to register daemon [0x%p]; unregistering daemon " - "[0x%p]\n", euid, pid, old_daemon->pid); - rc = ecryptfs_send_raw_message(ECRYPTFS_MSG_QUIT, old_daemon); - if (rc) - printk(KERN_WARNING "Failed to send QUIT " - "message to daemon [0x%p]; rc = [%d]\n", - old_daemon->pid, rc); - hlist_del(&old_daemon->euid_chain); - kfree(old_daemon); - } - rc = ecryptfs_spawn_daemon(&new_daemon, euid, user_ns, pid); - if (rc) - printk(KERN_ERR "%s: The gods are displeased with this attempt " - "to create a new daemon object for euid [%d]; pid " - "[0x%p]; rc = [%d]\n", __func__, euid, pid, rc); - mutex_unlock(&ecryptfs_daemon_hash_mux); - return rc; -} - /** * ecryptfs_exorcise_daemon - Destroy the daemon struct * diff --git a/fs/ecryptfs/miscdev.c b/fs/ecryptfs/miscdev.c index dda3c58eefc..4ec8f61ccf5 100644 --- a/fs/ecryptfs/miscdev.c +++ b/fs/ecryptfs/miscdev.c @@ -193,26 +193,20 @@ int ecryptfs_send_miscdev(char *data, size_t data_size, int rc = 0; mutex_lock(&msg_ctx->mux); - if (data) { - msg_ctx->msg = kmalloc((sizeof(*msg_ctx->msg) + data_size), - GFP_KERNEL); - if (!msg_ctx->msg) { - rc = -ENOMEM; - printk(KERN_ERR "%s: Out of memory whilst attempting " - "to kmalloc(%zd, GFP_KERNEL)\n", __func__, - (sizeof(*msg_ctx->msg) + data_size)); - goto out_unlock; - } - } else - msg_ctx->msg = NULL; + msg_ctx->msg = kmalloc((sizeof(*msg_ctx->msg) + data_size), + GFP_KERNEL); + if (!msg_ctx->msg) { + rc = -ENOMEM; + printk(KERN_ERR "%s: Out of memory whilst attempting " + "to kmalloc(%zd, GFP_KERNEL)\n", __func__, + (sizeof(*msg_ctx->msg) + data_size)); + goto out_unlock; + } msg_ctx->msg->index = msg_ctx->index; msg_ctx->msg->data_len = data_size; msg_ctx->type = msg_type; - if (data) { - memcpy(msg_ctx->msg->data, data, data_size); - msg_ctx->msg_size = (sizeof(*msg_ctx->msg) + data_size); - } else - msg_ctx->msg_size = 0; + memcpy(msg_ctx->msg->data, data, data_size); + msg_ctx->msg_size = (sizeof(*msg_ctx->msg) + data_size); mutex_lock(&daemon->mux); list_add_tail(&msg_ctx->daemon_out_list, &daemon->msg_ctx_out_queue); daemon->num_queued_msg_ctx++; -- cgit v1.2.3 From 3a5203ab3c0c31e0f1434c69e893bfb85c6e6657 Mon Sep 17 00:00:00 2001 From: Tyler Hicks Date: Mon, 16 Mar 2009 12:35:12 -0500 Subject: eCryptfs: Print FNEK sig properly in /proc/mounts The filename encryption key signature is not properly displayed in /proc/mounts. The "ecryptfs_sig=" mount option name is displayed for all global authentication tokens, included those for filename keys. This patch checks the global authentication token flags to determine if the key is a FEKEK or FNEK and prints the appropriate mount option name before the signature. Signed-off-by: Tyler Hicks --- fs/ecryptfs/super.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/fs/ecryptfs/super.c b/fs/ecryptfs/super.c index c27ac2b358a..b5003023f10 100644 --- a/fs/ecryptfs/super.c +++ b/fs/ecryptfs/super.c @@ -170,7 +170,10 @@ static int ecryptfs_show_options(struct seq_file *m, struct vfsmount *mnt) list_for_each_entry(walker, &mount_crypt_stat->global_auth_tok_list, mount_crypt_stat_list) { - seq_printf(m, ",ecryptfs_sig=%s", walker->sig); + if (walker->flags & ECRYPTFS_AUTH_TOK_FNEK) + seq_printf(m, ",ecryptfs_fnek_sig=%s", walker->sig); + else + seq_printf(m, ",ecryptfs_sig=%s", walker->sig); } mutex_unlock(&mount_crypt_stat->global_auth_tok_list_mutex); -- cgit v1.2.3 From 13a791b4e63eb0537a7f804a340d6527485983b4 Mon Sep 17 00:00:00 2001 From: Tyler Hicks Date: Mon, 13 Apr 2009 15:29:27 -0500 Subject: eCryptfs: Fix data corruption when using ecryptfs_passthrough ecryptfs_passthrough is a mount option that allows eCryptfs to allow data to be written to non-eCryptfs files in the lower filesystem. The passthrough option was causing data corruption due to it not always being treated as a non-eCryptfs file. The first 8 bytes of an eCryptfs file contains the decrypted file size. This value was being written to the non-eCryptfs files, too. Also, extra 0x00 characters were being written to make the file size a multiple of PAGE_CACHE_SIZE. Signed-off-by: Tyler Hicks --- fs/ecryptfs/crypto.c | 21 ++------------------- fs/ecryptfs/inode.c | 9 +++++++-- fs/ecryptfs/mmap.c | 11 +++++++++++ fs/ecryptfs/read_write.c | 32 +++++++++++++++++++++----------- 4 files changed, 41 insertions(+), 32 deletions(-) diff --git a/fs/ecryptfs/crypto.c b/fs/ecryptfs/crypto.c index 8b65f289ee0..b91851f1cda 100644 --- a/fs/ecryptfs/crypto.c +++ b/fs/ecryptfs/crypto.c @@ -483,15 +483,7 @@ int ecryptfs_encrypt_page(struct page *page) ecryptfs_inode = page->mapping->host; crypt_stat = &(ecryptfs_inode_to_private(ecryptfs_inode)->crypt_stat); - if (!(crypt_stat->flags & ECRYPTFS_ENCRYPTED)) { - rc = ecryptfs_write_lower_page_segment(ecryptfs_inode, page, - 0, PAGE_CACHE_SIZE); - if (rc) - printk(KERN_ERR "%s: Error attempting to copy " - "page at index [%ld]\n", __func__, - page->index); - goto out; - } + BUG_ON(!(crypt_stat->flags & ECRYPTFS_ENCRYPTED)); enc_extent_page = alloc_page(GFP_USER); if (!enc_extent_page) { rc = -ENOMEM; @@ -620,16 +612,7 @@ int ecryptfs_decrypt_page(struct page *page) ecryptfs_inode = page->mapping->host; crypt_stat = &(ecryptfs_inode_to_private(ecryptfs_inode)->crypt_stat); - if (!(crypt_stat->flags & ECRYPTFS_ENCRYPTED)) { - rc = ecryptfs_read_lower_page_segment(page, page->index, 0, - PAGE_CACHE_SIZE, - ecryptfs_inode); - if (rc) - printk(KERN_ERR "%s: Error attempting to copy " - "page at index [%ld]\n", __func__, - page->index); - goto out; - } + BUG_ON(!(crypt_stat->flags & ECRYPTFS_ENCRYPTED)); enc_extent_page = alloc_page(GFP_USER); if (!enc_extent_page) { rc = -ENOMEM; diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c index 55b3145b807..5ed86e25b8a 100644 --- a/fs/ecryptfs/inode.c +++ b/fs/ecryptfs/inode.c @@ -814,6 +814,13 @@ int ecryptfs_truncate(struct dentry *dentry, loff_t new_length) size_t num_zeros = (PAGE_CACHE_SIZE - (new_length & ~PAGE_CACHE_MASK)); + if (!(crypt_stat->flags & ECRYPTFS_ENCRYPTED)) { + rc = vmtruncate(inode, new_length); + if (rc) + goto out_free; + rc = vmtruncate(lower_dentry->d_inode, new_length); + goto out_free; + } if (num_zeros) { char *zeros_virt; @@ -915,8 +922,6 @@ static int ecryptfs_setattr(struct dentry *dentry, struct iattr *ia) } rc = 0; crypt_stat->flags &= ~(ECRYPTFS_ENCRYPTED); - mutex_unlock(&crypt_stat->cs_mutex); - goto out; } } mutex_unlock(&crypt_stat->cs_mutex); diff --git a/fs/ecryptfs/mmap.c b/fs/ecryptfs/mmap.c index 46cec2b6979..5c6bab9786e 100644 --- a/fs/ecryptfs/mmap.c +++ b/fs/ecryptfs/mmap.c @@ -449,6 +449,7 @@ int ecryptfs_write_inode_size_to_metadata(struct inode *ecryptfs_inode) struct ecryptfs_crypt_stat *crypt_stat; crypt_stat = &ecryptfs_inode_to_private(ecryptfs_inode)->crypt_stat; + BUG_ON(!(crypt_stat->flags & ECRYPTFS_ENCRYPTED)); if (crypt_stat->flags & ECRYPTFS_METADATA_IN_XATTR) return ecryptfs_write_inode_size_to_xattr(ecryptfs_inode); else @@ -490,6 +491,16 @@ static int ecryptfs_write_end(struct file *file, ecryptfs_printk(KERN_DEBUG, "Not a new file\n"); ecryptfs_printk(KERN_DEBUG, "Calling fill_zeros_to_end_of_page" "(page w/ index = [0x%.16x], to = [%d])\n", index, to); + if (!(crypt_stat->flags & ECRYPTFS_ENCRYPTED)) { + rc = ecryptfs_write_lower_page_segment(ecryptfs_inode, page, 0, + to); + if (!rc) { + rc = copied; + fsstack_copy_inode_size(ecryptfs_inode, + ecryptfs_inode_to_lower(ecryptfs_inode)); + } + goto out; + } /* Fills in zeros if 'to' goes beyond inode size */ rc = fill_zeros_to_end_of_page(page, to); if (rc) { diff --git a/fs/ecryptfs/read_write.c b/fs/ecryptfs/read_write.c index 75c2ea9fee3..a137c6ea2fe 100644 --- a/fs/ecryptfs/read_write.c +++ b/fs/ecryptfs/read_write.c @@ -117,13 +117,15 @@ int ecryptfs_write(struct file *ecryptfs_file, char *data, loff_t offset, size_t size) { struct page *ecryptfs_page; + struct ecryptfs_crypt_stat *crypt_stat; + struct inode *ecryptfs_inode = ecryptfs_file->f_dentry->d_inode; char *ecryptfs_page_virt; - loff_t ecryptfs_file_size = - i_size_read(ecryptfs_file->f_dentry->d_inode); + loff_t ecryptfs_file_size = i_size_read(ecryptfs_inode); loff_t data_offset = 0; loff_t pos; int rc = 0; + crypt_stat = &ecryptfs_inode_to_private(ecryptfs_inode)->crypt_stat; /* * if we are writing beyond current size, then start pos * at the current size - we'll fill in zeros from there. @@ -184,7 +186,13 @@ int ecryptfs_write(struct file *ecryptfs_file, char *data, loff_t offset, flush_dcache_page(ecryptfs_page); SetPageUptodate(ecryptfs_page); unlock_page(ecryptfs_page); - rc = ecryptfs_encrypt_page(ecryptfs_page); + if (crypt_stat->flags & ECRYPTFS_ENCRYPTED) + rc = ecryptfs_encrypt_page(ecryptfs_page); + else + rc = ecryptfs_write_lower_page_segment(ecryptfs_inode, + ecryptfs_page, + start_offset_in_page, + data_offset); page_cache_release(ecryptfs_page); if (rc) { printk(KERN_ERR "%s: Error encrypting " @@ -194,14 +202,16 @@ int ecryptfs_write(struct file *ecryptfs_file, char *data, loff_t offset, pos += num_bytes; } if ((offset + size) > ecryptfs_file_size) { - i_size_write(ecryptfs_file->f_dentry->d_inode, (offset + size)); - rc = ecryptfs_write_inode_size_to_metadata( - ecryptfs_file->f_dentry->d_inode); - if (rc) { - printk(KERN_ERR "Problem with " - "ecryptfs_write_inode_size_to_metadata; " - "rc = [%d]\n", rc); - goto out; + i_size_write(ecryptfs_inode, (offset + size)); + if (crypt_stat->flags & ECRYPTFS_ENCRYPTED) { + rc = ecryptfs_write_inode_size_to_metadata( + ecryptfs_inode); + if (rc) { + printk(KERN_ERR "Problem with " + "ecryptfs_write_inode_size_to_metadata; " + "rc = [%d]\n", rc); + goto out; + } } } out: -- cgit v1.2.3 From e77cc8d243f9f1e1d3f0799e23cc14e837ccc8c6 Mon Sep 17 00:00:00 2001 From: Tyler Hicks Date: Wed, 22 Apr 2009 04:08:46 -0500 Subject: eCryptfs: Remove ecryptfs_unlink_sigs warnings A feature was added to the eCryptfs umount helper to automatically unlink the keys used for an eCryptfs mount from the kernel keyring upon umount. This patch keeps the unrecognized mount option warnings for ecryptfs_unlink_sigs out of the logs. Signed-off-by: Tyler Hicks --- fs/ecryptfs/ecryptfs_kernel.h | 1 + fs/ecryptfs/main.c | 6 +++++- fs/ecryptfs/super.c | 2 ++ 3 files changed, 8 insertions(+), 1 deletion(-) diff --git a/fs/ecryptfs/ecryptfs_kernel.h b/fs/ecryptfs/ecryptfs_kernel.h index 064c5820e4e..00b30a2d546 100644 --- a/fs/ecryptfs/ecryptfs_kernel.h +++ b/fs/ecryptfs/ecryptfs_kernel.h @@ -269,6 +269,7 @@ struct ecryptfs_crypt_stat { #define ECRYPTFS_ENCRYPT_FILENAMES 0x00000800 #define ECRYPTFS_ENCFN_USE_MOUNT_FNEK 0x00001000 #define ECRYPTFS_ENCFN_USE_FEK 0x00002000 +#define ECRYPTFS_UNLINK_SIGS 0x00004000 u32 flags; unsigned int file_version; size_t iv_bytes; diff --git a/fs/ecryptfs/main.c b/fs/ecryptfs/main.c index 7638b0a02c8..ccabd5faa04 100644 --- a/fs/ecryptfs/main.c +++ b/fs/ecryptfs/main.c @@ -208,7 +208,7 @@ enum { ecryptfs_opt_sig, ecryptfs_opt_ecryptfs_sig, ecryptfs_opt_passthrough, ecryptfs_opt_xattr_metadata, ecryptfs_opt_encrypted_view, ecryptfs_opt_fnek_sig, ecryptfs_opt_fn_cipher, ecryptfs_opt_fn_cipher_key_bytes, - ecryptfs_opt_err }; + ecryptfs_opt_unlink_sigs, ecryptfs_opt_err }; static const match_table_t tokens = { {ecryptfs_opt_sig, "sig=%s"}, @@ -222,6 +222,7 @@ static const match_table_t tokens = { {ecryptfs_opt_fnek_sig, "ecryptfs_fnek_sig=%s"}, {ecryptfs_opt_fn_cipher, "ecryptfs_fn_cipher=%s"}, {ecryptfs_opt_fn_cipher_key_bytes, "ecryptfs_fn_key_bytes=%u"}, + {ecryptfs_opt_unlink_sigs, "ecryptfs_unlink_sigs"}, {ecryptfs_opt_err, NULL} }; @@ -402,6 +403,9 @@ static int ecryptfs_parse_options(struct super_block *sb, char *options) fn_cipher_key_bytes; fn_cipher_key_bytes_set = 1; break; + case ecryptfs_opt_unlink_sigs: + mount_crypt_stat->flags |= ECRYPTFS_UNLINK_SIGS; + break; case ecryptfs_opt_err: default: printk(KERN_WARNING diff --git a/fs/ecryptfs/super.c b/fs/ecryptfs/super.c index b5003023f10..fa4c7e7d15d 100644 --- a/fs/ecryptfs/super.c +++ b/fs/ecryptfs/super.c @@ -189,6 +189,8 @@ static int ecryptfs_show_options(struct seq_file *m, struct vfsmount *mnt) seq_printf(m, ",ecryptfs_xattr_metadata"); if (mount_crypt_stat->flags & ECRYPTFS_ENCRYPTED_VIEW_ENABLED) seq_printf(m, ",ecryptfs_encrypted_view"); + if (mount_crypt_stat->flags & ECRYPTFS_UNLINK_SIGS) + seq_printf(m, ",ecryptfs_unlink_sigs"); return 0; } -- cgit v1.2.3 From 29fe1b481283a1bada994a69f65736db4ae6f35f Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Wed, 22 Apr 2009 02:26:37 -0700 Subject: netfilter: ctnetlink: fix gcc warning during compilation This patch fixes a (bogus?) gcc warning during compilation: net/netfilter/nf_conntrack_netlink.c:1234: warning: 'helpname' may be used uninitialized in this function net/netfilter/nf_conntrack_netlink.c:991: warning: 'helpname' may be used uninitialized in this function In fact, helpname is initialized by ctnetlink_parse_help() so I cannot see a way to use it without being initialized. Signed-off-by: Pablo Neira Ayuso Signed-off-by: David S. Miller --- net/netfilter/nf_conntrack_netlink.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c index 0ea36e0c8a0..f13fc57e1ec 100644 --- a/net/netfilter/nf_conntrack_netlink.c +++ b/net/netfilter/nf_conntrack_netlink.c @@ -988,7 +988,7 @@ ctnetlink_change_helper(struct nf_conn *ct, struct nlattr *cda[]) { struct nf_conntrack_helper *helper; struct nf_conn_help *help = nfct_help(ct); - char *helpname; + char *helpname = NULL; int err; /* don't change helper of sibling connections */ @@ -1231,7 +1231,7 @@ ctnetlink_create_conntrack(struct nlattr *cda[], rcu_read_lock(); if (cda[CTA_HELP]) { - char *helpname; + char *helpname = NULL; err = ctnetlink_parse_help(cda[CTA_HELP], &helpname); if (err < 0) -- cgit v1.2.3 From 956d039a2537cf79ca608450d36cc70e0e515482 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 17 Apr 2009 04:14:15 -0700 Subject: sparc: Fix bus type probing for ESP and LE devices. If there is a dummy "espdma" or "ledma" parent device above ESP scsi or LE ethernet device nodes, we have to match the bus as SBUS. Otherwise the address and size cell counts are wrong and we don't calculate the final physical device resource values correctly at all. Commit 5280267c1dddb8d413595b87dc406624bb497946 ("sparc: Fix handling of LANCE and ESP parent nodes in of_device.c") was meant to fix this problem, but that only influences the inner loop of build_device_resources(). We need this logic to also kick in at the beginning of build_device_resources() as well, when we make the first attempt to determine the device's immediate parent bus type for 'reg' property element extraction. Based almost entirely upon a patch by Friedrich Oslage. Tested-by: Meelis Roos Signed-off-by: David S. Miller --- arch/sparc/kernel/of_device_32.c | 21 +++++++++++++++++++-- arch/sparc/kernel/of_device_64.c | 21 +++++++++++++++++++-- 2 files changed, 38 insertions(+), 4 deletions(-) diff --git a/arch/sparc/kernel/of_device_32.c b/arch/sparc/kernel/of_device_32.c index 0a83bd73765..c8f14c1dc52 100644 --- a/arch/sparc/kernel/of_device_32.c +++ b/arch/sparc/kernel/of_device_32.c @@ -246,8 +246,25 @@ static unsigned long of_bus_pci_get_flags(const u32 *addr, unsigned long flags) static int of_bus_sbus_match(struct device_node *np) { - return !strcmp(np->name, "sbus") || - !strcmp(np->name, "sbi"); + struct device_node *dp = np; + + while (dp) { + if (!strcmp(dp->name, "sbus") || + !strcmp(dp->name, "sbi")) + return 1; + + /* Have a look at use_1to1_mapping(). We're trying + * to match SBUS if that's the top-level bus and we + * don't have some intervening real bus that provides + * ranges based translations. + */ + if (of_find_property(dp, "ranges", NULL) != NULL) + break; + + dp = dp->parent; + } + + return 0; } static void of_bus_sbus_count_cells(struct device_node *child, diff --git a/arch/sparc/kernel/of_device_64.c b/arch/sparc/kernel/of_device_64.c index 27381f1baff..5ac287ac03d 100644 --- a/arch/sparc/kernel/of_device_64.c +++ b/arch/sparc/kernel/of_device_64.c @@ -300,8 +300,25 @@ static unsigned long of_bus_pci_get_flags(const u32 *addr, unsigned long flags) static int of_bus_sbus_match(struct device_node *np) { - return !strcmp(np->name, "sbus") || - !strcmp(np->name, "sbi"); + struct device_node *dp = np; + + while (dp) { + if (!strcmp(dp->name, "sbus") || + !strcmp(dp->name, "sbi")) + return 1; + + /* Have a look at use_1to1_mapping(). We're trying + * to match SBUS if that's the top-level bus and we + * don't have some intervening real bus that provides + * ranges based translations. + */ + if (of_find_property(dp, "ranges", NULL) != NULL) + break; + + dp = dp->parent; + } + + return 0; } static void of_bus_sbus_count_cells(struct device_node *child, -- cgit v1.2.3 From 99894a799f09cf9e28296bb16e75bd5830fd2c4e Mon Sep 17 00:00:00 2001 From: Avi Kivity Date: Sun, 29 Mar 2009 16:31:25 +0300 Subject: KVM: MMU: Fix off-by-one calculating large page count The large page initialization code concludes there are two large pages spanned by a slot covering 1 (small) page starting at gfn 1. This is incorrect, and also results in incorrect write_count initialization in some cases (base = 1, npages = 513 for example). Cc: stable@kernel.org Signed-off-by: Avi Kivity --- virt/kvm/kvm_main.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c index 605697e9c4d..28d693a1ee8 100644 --- a/virt/kvm/kvm_main.c +++ b/virt/kvm/kvm_main.c @@ -920,6 +920,7 @@ int __kvm_set_memory_region(struct kvm *kvm, int r; gfn_t base_gfn; unsigned long npages; + int largepages; unsigned long i; struct kvm_memory_slot *memslot; struct kvm_memory_slot old, new; @@ -995,11 +996,8 @@ int __kvm_set_memory_region(struct kvm *kvm, new.userspace_addr = 0; } if (npages && !new.lpage_info) { - int largepages = npages / KVM_PAGES_PER_HPAGE; - if (npages % KVM_PAGES_PER_HPAGE) - largepages++; - if (base_gfn % KVM_PAGES_PER_HPAGE) - largepages++; + largepages = 1 + (base_gfn + npages - 1) / KVM_PAGES_PER_HPAGE; + largepages -= base_gfn / KVM_PAGES_PER_HPAGE; new.lpage_info = vmalloc(largepages * sizeof(*new.lpage_info)); -- cgit v1.2.3 From d24d2c1cc4156102f9df9cd0425d58cabf955519 Mon Sep 17 00:00:00 2001 From: Jes Sorensen Date: Thu, 9 Apr 2009 16:38:14 +0200 Subject: KVM: ia64: fix locking order entering guest Reorder locking as down_read() may return with local interrupts enabled, which means we could go into vti_vcpu_run() with interrupts enabled. This caused random crashes on the Altix as the timer interrupt tried to read a memory mapped clock source, for which the TLB had not yet been reinstated in the exit, before ipsr was retored. Signed-off-by: Jes Sorensen Acked-by: Xiantao Zhang Signed-off-by: Avi Kivity --- arch/ia64/kvm/kvm-ia64.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/arch/ia64/kvm/kvm-ia64.c b/arch/ia64/kvm/kvm-ia64.c index 28af6a731bb..d20a5db4c4d 100644 --- a/arch/ia64/kvm/kvm-ia64.c +++ b/arch/ia64/kvm/kvm-ia64.c @@ -610,20 +610,22 @@ static int __vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run) int r; again: - preempt_disable(); - local_irq_disable(); - if (signal_pending(current)) { - local_irq_enable(); - preempt_enable(); r = -EINTR; kvm_run->exit_reason = KVM_EXIT_INTR; goto out; } + /* + * down_read() may sleep and return with interrupts enabled + */ + down_read(&vcpu->kvm->slots_lock); + + preempt_disable(); + local_irq_disable(); + vcpu->guest_mode = 1; kvm_guest_enter(); - down_read(&vcpu->kvm->slots_lock); r = vti_vcpu_run(vcpu, kvm_run); if (r < 0) { local_irq_enable(); -- cgit v1.2.3 From bf47a760f66add7870fba33ab50f58b550d6bbd1 Mon Sep 17 00:00:00 2001 From: Marcelo Tosatti Date: Sun, 5 Apr 2009 14:54:46 -0300 Subject: KVM: MMU: disable global page optimization Complexity to fix it not worthwhile the gains, as discussed in http://article.gmane.org/gmane.comp.emulators.kvm.devel/28649. Cc: stable@kernel.org Signed-off-by: Marcelo Tosatti Signed-off-by: Avi Kivity --- arch/x86/kvm/mmu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c index 2a36f7f7c4c..b6caf1329b1 100644 --- a/arch/x86/kvm/mmu.c +++ b/arch/x86/kvm/mmu.c @@ -1248,7 +1248,7 @@ static struct kvm_mmu_page *kvm_mmu_get_page(struct kvm_vcpu *vcpu, pgprintk("%s: adding gfn %lx role %x\n", __func__, gfn, role.word); sp->gfn = gfn; sp->role = role; - sp->global = role.cr4_pge; + sp->global = 0; hlist_add_head(&sp->hash_link, bucket); if (!direct) { if (rmap_write_protect(vcpu->kvm, gfn)) -- cgit v1.2.3 From 4cd481f68dde99ac416003b825c835f71e364393 Mon Sep 17 00:00:00 2001 From: Jan Kiszka Date: Mon, 13 Apr 2009 11:59:32 +0200 Subject: KVM: Fix overlapping check for memory slots When checking for overlapping slots on registration of a new one, kvm currently also considers zero-length (ie. deleted) slots and rejects requests incorrectly. This finally denies user space from joining slots. Fix the check by skipping deleted slots and advertise this via a KVM_CAP_JOIN_MEMORY_REGIONS_WORKS. Cc: stable@kernel.org Signed-off-by: Jan Kiszka Signed-off-by: Avi Kivity --- include/linux/kvm.h | 2 ++ virt/kvm/kvm_main.c | 3 ++- 2 files changed, 4 insertions(+), 1 deletion(-) diff --git a/include/linux/kvm.h b/include/linux/kvm.h index 311a073afe8..8cc137911b3 100644 --- a/include/linux/kvm.h +++ b/include/linux/kvm.h @@ -409,6 +409,8 @@ struct kvm_trace_rec { #ifdef __KVM_HAVE_DEVICE_ASSIGNMENT #define KVM_CAP_DEVICE_DEASSIGNMENT 27 #endif +/* Another bug in KVM_SET_USER_MEMORY_REGION fixed: */ +#define KVM_CAP_JOIN_MEMORY_REGIONS_WORKS 30 #ifdef KVM_CAP_IRQ_ROUTING diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c index 28d693a1ee8..1ecbe2391c8 100644 --- a/virt/kvm/kvm_main.c +++ b/virt/kvm/kvm_main.c @@ -961,7 +961,7 @@ int __kvm_set_memory_region(struct kvm *kvm, for (i = 0; i < KVM_MEMORY_SLOTS; ++i) { struct kvm_memory_slot *s = &kvm->memslots[i]; - if (s == memslot) + if (s == memslot || !s->npages) continue; if (!((base_gfn + npages <= s->base_gfn) || (base_gfn >= s->base_gfn + s->npages))) @@ -1983,6 +1983,7 @@ static long kvm_dev_ioctl_check_extension_generic(long arg) switch (arg) { case KVM_CAP_USER_MEMORY: case KVM_CAP_DESTROY_MEMORY_REGION_WORKS: + case KVM_CAP_JOIN_MEMORY_REGIONS_WORKS: return 1; #ifdef CONFIG_HAVE_KVM_IRQCHIP case KVM_CAP_IRQ_ROUTING: -- cgit v1.2.3 From 7f1ea208968f021943d4103ba59e06bb6d8239cb Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Wed, 25 Feb 2009 16:08:31 +0100 Subject: KVM: x86: release time_page on vcpu destruction Not releasing the time_page causes a leak of that page or the compound page it is situated in. Cc: stable@kernel.org Signed-off-by: Joerg Roedel Signed-off-by: Avi Kivity --- arch/x86/kvm/x86.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 8ca100a9eca..a1ecec5c03e 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -4159,6 +4159,11 @@ EXPORT_SYMBOL_GPL(kvm_put_guest_fpu); void kvm_arch_vcpu_free(struct kvm_vcpu *vcpu) { + if (vcpu->arch.time_page) { + kvm_release_page_dirty(vcpu->arch.time_page); + vcpu->arch.time_page = NULL; + } + kvm_x86_ops->vcpu_free(vcpu); } -- cgit v1.2.3 From 888d256e9c565cb61505bd218eb37c81fe77a325 Mon Sep 17 00:00:00 2001 From: Jan Kiszka Date: Fri, 17 Apr 2009 19:24:58 +0200 Subject: KVM: Unregister cpufreq notifier on unload Properly unregister cpufreq notifier on onload if it was registered during init. Signed-off-by: Jan Kiszka Signed-off-by: Avi Kivity --- arch/x86/kvm/x86.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index a1ecec5c03e..7c1ce5ac613 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -2775,6 +2775,9 @@ out: void kvm_arch_exit(void) { + if (!boot_cpu_has(X86_FEATURE_CONSTANT_TSC)) + cpufreq_unregister_notifier(&kvmclock_cpufreq_notifier_block, + CPUFREQ_TRANSITION_NOTIFIER); kvm_x86_ops = NULL; kvm_mmu_module_exit(); } -- cgit v1.2.3 From 92ea599c9757bc31c279b34737fd79a4f074f91c Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Wed, 22 Apr 2009 23:16:21 +1000 Subject: m68knommu: update the default config for the ColdFire 5249EVB. Signed-off-by: Greg Ungerer --- arch/m68knommu/configs/m5249evb_defconfig | 268 +++++++++++++++++++++++------- 1 file changed, 209 insertions(+), 59 deletions(-) diff --git a/arch/m68knommu/configs/m5249evb_defconfig b/arch/m68knommu/configs/m5249evb_defconfig index cc6458333d6..2efba32e33a 100644 --- a/arch/m68knommu/configs/m5249evb_defconfig +++ b/arch/m68knommu/configs/m5249evb_defconfig @@ -1,6 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc1 +# Linux kernel version: 2.6.30-rc2 +# Wed Apr 22 17:32:41 2009 # CONFIG_M68K=y # CONFIG_MMU is not set @@ -15,9 +16,10 @@ CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_TIME_LOW_RES=y +# CONFIG_GENERIC_CLOCKEVENTS is not set CONFIG_NO_IOPORT=y -CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -29,11 +31,23 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y # CONFIG_SYSVIPC is not set +# CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set @@ -41,44 +55,37 @@ CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y -# CONFIG_UID16 is not set -# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -# CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set # CONFIG_EPOLL is not set # CONFIG_SIGNALFD is not set # CONFIG_TIMERFD is not set # CONFIG_EVENTFD is not set +# CONFIG_AIO is not set # CONFIG_VM_EVENT_COUNTERS is not set -CONFIG_SLAB=y -# CONFIG_SLUB is not set +# CONFIG_SLUB_DEBUG is not set +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set -# CONFIG_HAVE_OPROFILE is not set -# CONFIG_HAVE_KPROBES is not set -# CONFIG_HAVE_KRETPROBES is not set -# CONFIG_HAVE_DMA_ATTRS is not set -CONFIG_SLABINFO=y -CONFIG_TINY_SHMEM=y +# CONFIG_SLOW_WORK is not set +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set +# CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -92,7 +99,7 @@ CONFIG_IOSCHED_NOOP=y # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" -CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Processor type and features @@ -144,45 +151,103 @@ CONFIG_RAMAUTOBIT=y # CONFIG_ROM is not set CONFIG_RAMKERNEL=y # CONFIG_ROMKERNEL is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_VIRT_TO_BUS=y +# CONFIG_UNEVICTABLE_LRU is not set CONFIG_ISA_DMA_API=y -# -# Bus options (PCI, PCMCIA, EISA, MCA, ISA) -# -# CONFIG_PCI is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set - # # Executable file formats # CONFIG_BINFMT_FLAT=y # CONFIG_BINFMT_ZFLAT is not set # CONFIG_BINFMT_SHARED_FLAT is not set -# CONFIG_BINFMT_AOUT is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # # Power management options # # CONFIG_PM is not set - -# -# Networking -# -# CONFIG_NET is not set +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -194,6 +259,7 @@ CONFIG_BINFMT_FLAT=y CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set @@ -258,6 +324,11 @@ CONFIG_MTD_UCLINUX=y # CONFIG_MTD_NAND is not set # CONFIG_MTD_ONENAND is not set +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + # # UBI - Unsorted block images # @@ -266,14 +337,15 @@ CONFIG_MTD_UCLINUX=y CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set -CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set -# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set +# CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -285,6 +357,56 @@ CONFIG_HAVE_IDE=y # CONFIG_SCSI_DMA is not set # CONFIG_SCSI_NETLINK is not set # CONFIG_MD is not set +CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +# CONFIG_MII is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# +# CONFIG_WAN is not set +CONFIG_PPP=y +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +# CONFIG_PPP_ASYNC is not set +# CONFIG_PPP_SYNC_TTY is not set +# CONFIG_PPP_DEFLATE is not set +# CONFIG_PPP_BSDCOMP is not set +# CONFIG_PPP_MPPE is not set +# CONFIG_PPPOE is not set +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=y +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set # CONFIG_PHONE is not set # @@ -302,7 +424,7 @@ CONFIG_HAVE_IDE=y # Character devices # # CONFIG_VT is not set -# CONFIG_DEVKMEM is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -315,7 +437,6 @@ CONFIG_HAVE_IDE=y # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_COLDFIRE is not set CONFIG_SERIAL_MCF=y CONFIG_SERIAL_MCF_BAUDRATE=19200 CONFIG_SERIAL_MCF_CONSOLE=y @@ -323,7 +444,8 @@ CONFIG_SERIAL_MCF_CONSOLE=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set -# CONFIG_HW_RANDOM is not set +CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set @@ -334,19 +456,23 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -356,11 +482,13 @@ CONFIG_SSB_POSSIBLE=y # Multimedia core support # # CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set # # Multimedia drivers # -# CONFIG_DAB is not set +CONFIG_DAB=y # # Graphics support @@ -374,10 +502,6 @@ CONFIG_SSB_POSSIBLE=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set @@ -385,7 +509,10 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -393,18 +520,27 @@ CONFIG_SSB_POSSIBLE=y CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +# CONFIG_FILE_LOCKING is not set # CONFIG_XFS_FS is not set -# CONFIG_DNOTIFY is not set -# CONFIG_INOTIFY is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -427,10 +563,7 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -440,13 +573,21 @@ CONFIG_SYSFS=y # CONFIG_EFS_FS is not set # CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set CONFIG_ROMFS_FS=y +# CONFIG_ROMFS_BACKED_BY_BLOCK is not set +CONFIG_ROMFS_BACKED_BY_MTD=y +# CONFIG_ROMFS_BACKED_BY_BOTH is not set +CONFIG_ROMFS_ON_MTD=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set +# CONFIG_NETWORK_FILESYSTEMS is not set # # Partition Types @@ -454,6 +595,7 @@ CONFIG_ROMFS_FS=y # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y # CONFIG_NLS is not set +# CONFIG_DLM is not set # # Kernel hacking @@ -468,10 +610,14 @@ CONFIG_FRAME_WARN=1024 # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set # CONFIG_SAMPLES is not set # CONFIG_FULLDEBUG is not set # CONFIG_HIGHPROFILE is not set -# CONFIG_BOOTPARAM is not set +CONFIG_BOOTPARAM=y +CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0" # CONFIG_NO_KERNEL_MSG is not set # CONFIG_BDM_DISABLE is not set @@ -480,18 +626,22 @@ CONFIG_FRAME_WARN=1024 # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # -# CONFIG_GENERIC_FIND_FIRST_BIT is not set +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set # CONFIG_CRC32 is not set # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_HAS_IOMEM=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y -- cgit v1.2.3 From 2d4f9efa2a529f352dafd41a616c91531bb13ccd Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Wed, 22 Apr 2009 23:30:48 +1000 Subject: m68knommu: update the default config for the ColdFire 5257EVB board Signed-off-by: Greg Ungerer --- arch/m68knommu/configs/m5275evb_defconfig | 167 +++++++++++++++++------------- 1 file changed, 96 insertions(+), 71 deletions(-) diff --git a/arch/m68knommu/configs/m5275evb_defconfig b/arch/m68knommu/configs/m5275evb_defconfig index 0d1256f5add..dc5c621d419 100644 --- a/arch/m68knommu/configs/m5275evb_defconfig +++ b/arch/m68knommu/configs/m5275evb_defconfig @@ -1,6 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc1 +# Linux kernel version: 2.6.30-rc2 +# Wed Apr 22 23:29:01 2009 # CONFIG_M68K=y # CONFIG_MMU is not set @@ -15,9 +16,10 @@ CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_TIME_LOW_RES=y +CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_NO_IOPORT=y -CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -33,10 +35,19 @@ CONFIG_LOCALVERSION_AUTO=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set @@ -44,44 +55,37 @@ CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y -# CONFIG_UID16 is not set -# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -# CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set # CONFIG_EPOLL is not set # CONFIG_SIGNALFD is not set # CONFIG_TIMERFD is not set # CONFIG_EVENTFD is not set +# CONFIG_AIO is not set # CONFIG_VM_EVENT_COUNTERS is not set -CONFIG_SLAB=y -# CONFIG_SLUB is not set +# CONFIG_SLUB_DEBUG is not set +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set -# CONFIG_HAVE_OPROFILE is not set -# CONFIG_HAVE_KPROBES is not set -# CONFIG_HAVE_KRETPROBES is not set -# CONFIG_HAVE_DMA_ATTRS is not set -CONFIG_SLABINFO=y -CONFIG_TINY_SHMEM=y +# CONFIG_SLOW_WORK is not set +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set +# CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -95,7 +99,7 @@ CONFIG_IOSCHED_NOOP=y # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" -CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Processor type and features @@ -148,44 +152,39 @@ CONFIG_RAMAUTOBIT=y # CONFIG_ROM is not set CONFIG_RAMKERNEL=y # CONFIG_ROMKERNEL is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_VIRT_TO_BUS=y +# CONFIG_UNEVICTABLE_LRU is not set CONFIG_ISA_DMA_API=y -# -# Bus options (PCI, PCMCIA, EISA, MCA, ISA) -# -# CONFIG_PCI is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set - # # Executable file formats # CONFIG_BINFMT_FLAT=y # CONFIG_BINFMT_ZFLAT is not set # CONFIG_BINFMT_SHARED_FLAT is not set -# CONFIG_BINFMT_AOUT is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # # Power management options # # CONFIG_PM is not set - -# -# Networking -# CONFIG_NET=y # @@ -226,6 +225,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -235,7 +235,9 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -246,14 +248,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -332,6 +328,11 @@ CONFIG_MTD_UCLINUX=y # CONFIG_MTD_NAND is not set # CONFIG_MTD_ONENAND is not set +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + # # UBI - Unsorted block images # @@ -347,6 +348,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set # CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -360,7 +362,7 @@ CONFIG_HAVE_IDE=y # CONFIG_SCSI_NETLINK is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -370,10 +372,15 @@ CONFIG_NETDEVICES=y # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y # CONFIG_MII is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set CONFIG_FEC=y CONFIG_FEC2=y @@ -385,8 +392,10 @@ CONFIG_FEC2=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set CONFIG_PPP=y # CONFIG_PPP_MULTILINK is not set @@ -421,7 +430,7 @@ CONFIG_SLHC=y # Character devices # # CONFIG_VT is not set -# CONFIG_DEVKMEM is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -434,7 +443,6 @@ CONFIG_SLHC=y # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_COLDFIRE is not set CONFIG_SERIAL_MCF=y CONFIG_SERIAL_MCF_BAUDRATE=19200 CONFIG_SERIAL_MCF_CONSOLE=y @@ -442,7 +450,8 @@ CONFIG_SERIAL_MCF_CONSOLE=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set -# CONFIG_HW_RANDOM is not set +CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set @@ -453,19 +462,23 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -476,6 +489,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set # # Multimedia drivers @@ -494,10 +508,6 @@ CONFIG_DAB=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set @@ -505,7 +515,10 @@ CONFIG_DAB=y # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -513,12 +526,14 @@ CONFIG_DAB=y CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +# CONFIG_FILE_LOCKING is not set # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set # CONFIG_QUOTA is not set @@ -526,6 +541,11 @@ CONFIG_EXT2_FS=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -548,10 +568,7 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -561,21 +578,21 @@ CONFIG_SYSFS=y # CONFIG_EFS_FS is not set # CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set CONFIG_ROMFS_FS=y +# CONFIG_ROMFS_BACKED_BY_BLOCK is not set +CONFIG_ROMFS_BACKED_BY_MTD=y +# CONFIG_ROMFS_BACKED_BY_BOTH is not set +CONFIG_ROMFS_ON_MTD=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -CONFIG_NETWORK_FILESYSTEMS=y -# CONFIG_NFS_FS is not set -# CONFIG_NFSD is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set +# CONFIG_NILFS2_FS is not set +# CONFIG_NETWORK_FILESYSTEMS is not set # # Partition Types @@ -598,10 +615,14 @@ CONFIG_FRAME_WARN=1024 # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_SAMPLES is not set # CONFIG_FULLDEBUG is not set # CONFIG_HIGHPROFILE is not set -# CONFIG_BOOTPARAM is not set +CONFIG_BOOTPARAM=y +CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0" # CONFIG_NO_KERNEL_MSG is not set # CONFIG_BDM_DISABLE is not set @@ -610,18 +631,22 @@ CONFIG_FRAME_WARN=1024 # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # -# CONFIG_GENERIC_FIND_FIRST_BIT is not set +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set # CONFIG_CRC32 is not set # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_HAS_IOMEM=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y -- cgit v1.2.3 From 73fc267615fd547538d4afb602f51de6b5ab0a31 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Thu, 23 Apr 2009 00:11:23 +1000 Subject: m68knommu: update the default config for the ColdFire 5307C3 board Signed-off-by: Greg Ungerer --- arch/m68knommu/configs/m5307c3_defconfig | 231 ++++++++++++++++++++++--------- 1 file changed, 163 insertions(+), 68 deletions(-) diff --git a/arch/m68knommu/configs/m5307c3_defconfig b/arch/m68knommu/configs/m5307c3_defconfig index fe2acdfa4d7..3a3f6733ae4 100644 --- a/arch/m68knommu/configs/m5307c3_defconfig +++ b/arch/m68knommu/configs/m5307c3_defconfig @@ -1,6 +1,6 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc1 +# Linux kernel version: 2.6.30-rc2 # CONFIG_M68K=y # CONFIG_MMU is not set @@ -15,9 +15,10 @@ CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_TIME_LOW_RES=y +# CONFIG_GENERIC_CLOCKEVENTS is not set CONFIG_NO_IOPORT=y -CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -33,10 +34,21 @@ CONFIG_LOCALVERSION_AUTO=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_USER_SCHED is not set +# CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set @@ -44,44 +56,37 @@ CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y -# CONFIG_UID16 is not set -# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -# CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set # CONFIG_EPOLL is not set # CONFIG_SIGNALFD is not set # CONFIG_TIMERFD is not set # CONFIG_EVENTFD is not set +# CONFIG_AIO is not set # CONFIG_VM_EVENT_COUNTERS is not set -CONFIG_SLAB=y -# CONFIG_SLUB is not set +# CONFIG_SLUB_DEBUG is not set +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set -# CONFIG_HAVE_OPROFILE is not set -# CONFIG_HAVE_KPROBES is not set -# CONFIG_HAVE_KRETPROBES is not set -# CONFIG_HAVE_DMA_ATTRS is not set -CONFIG_SLABINFO=y -CONFIG_TINY_SHMEM=y +# CONFIG_SLOW_WORK is not set +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set +# CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -95,7 +100,7 @@ CONFIG_IOSCHED_NOOP=y # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" -CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Processor type and features @@ -127,12 +132,11 @@ CONFIG_CLOCK_DIV=2 # # CONFIG_ARN5307 is not set CONFIG_M5307C3=y -# CONFIG_eLIA is not set # CONFIG_SECUREEDGEMP3 is not set # CONFIG_CLEOPATRA is not set # CONFIG_NETtel is not set CONFIG_FREESCALE=y -# CONFIG_4KSTACKS is not set +CONFIG_4KSTACKS=y CONFIG_HZ=100 # @@ -153,45 +157,36 @@ CONFIG_RAMAUTOBIT=y # CONFIG_ROM is not set CONFIG_RAMKERNEL=y # CONFIG_ROMKERNEL is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_VIRT_TO_BUS=y +# CONFIG_UNEVICTABLE_LRU is not set CONFIG_ISA_DMA_API=y -# -# Bus options (PCI, PCMCIA, EISA, MCA, ISA) -# -# CONFIG_PCI is not set -# CONFIG_COMEMPCI is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set - # # Executable file formats # CONFIG_BINFMT_FLAT=y # CONFIG_BINFMT_ZFLAT is not set # CONFIG_BINFMT_SHARED_FLAT is not set -# CONFIG_BINFMT_AOUT is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # # Power management options # # CONFIG_PM is not set - -# -# Networking -# CONFIG_NET=y # @@ -232,6 +227,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -241,7 +237,9 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -252,14 +250,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -274,7 +266,79 @@ CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set -# CONFIG_MTD is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_RAM=y +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_UCLINUX=y +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set @@ -286,6 +350,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set # CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -299,7 +364,7 @@ CONFIG_HAVE_IDE=y # CONFIG_SCSI_NETLINK is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -309,10 +374,15 @@ CONFIG_NETDEVICES=y # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y # CONFIG_MII is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -322,8 +392,10 @@ CONFIG_NET_ETHERNET=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set CONFIG_PPP=y # CONFIG_PPP_MULTILINK is not set @@ -381,7 +453,7 @@ CONFIG_INPUT=y # Character devices # # CONFIG_VT is not set -# CONFIG_DEVKMEM is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -394,13 +466,12 @@ CONFIG_INPUT=y # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_COLDFIRE is not set CONFIG_SERIAL_MCF=y CONFIG_SERIAL_MCF_BAUDRATE=19200 CONFIG_SERIAL_MCF_CONSOLE=y CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_GEN_RTC is not set @@ -413,19 +484,23 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -436,6 +511,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set # # Multimedia drivers @@ -454,10 +530,6 @@ CONFIG_DAB=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set # CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set @@ -466,7 +538,10 @@ CONFIG_DAB=y # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -474,12 +549,14 @@ CONFIG_DAB=y CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set # CONFIG_QUOTA is not set @@ -487,6 +564,11 @@ CONFIG_EXT2_FS=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -509,10 +591,7 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -520,14 +599,22 @@ CONFIG_SYSFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set CONFIG_ROMFS_FS=y +# CONFIG_ROMFS_BACKED_BY_BLOCK is not set +CONFIG_ROMFS_BACKED_BY_MTD=y +# CONFIG_ROMFS_BACKED_BY_BOTH is not set +CONFIG_ROMFS_ON_MTD=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set # CONFIG_NETWORK_FILESYSTEMS is not set # @@ -551,10 +638,14 @@ CONFIG_FRAME_WARN=1024 # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_SAMPLES is not set CONFIG_FULLDEBUG=y # CONFIG_HIGHPROFILE is not set -# CONFIG_BOOTPARAM is not set +CONFIG_BOOTPARAM=y +CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0" # CONFIG_NO_KERNEL_MSG is not set # CONFIG_BDM_DISABLE is not set @@ -563,18 +654,22 @@ CONFIG_FULLDEBUG=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # -# CONFIG_GENERIC_FIND_FIRST_BIT is not set +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set # CONFIG_CRC32 is not set # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_HAS_IOMEM=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y -- cgit v1.2.3 From db2f38c22ea3f545be3b5772e5f9dc5861b74536 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Wed, 22 Apr 2009 20:33:40 +0200 Subject: palm_bk3710: UDMA performance fix Fix UDMA throughput bug: tCYC averages t2CYCTYP/2, but the code previously assumed it was the same as t2CYCTYP. (That is, it was using just one clock edge, not both.) Move the table's type declaration so it's adjacent to the table, making it more clear what those numbers mean. On one system this change increased throughput by almost 4x: UDMA/66 sometimes topped 23 MB/sec (on a drive known to do much better). On another system it was around a 10% win (UDMA/66 up to 7+ MB/sec). The difference might be caused by the ratio between memory and IDE clocks. In the system with large speedup, this was exactly 2 (as a workaround for a rev 1.1 silicon bug). The other system used a more standard ratio of 1.63 (and rev 2.1 silicon) ... clock domain synch might have some issues, they're not unheard-of. Signed-off-by: David Brownell Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/palm_bk3710.c | 26 ++++++++++++-------------- 1 file changed, 12 insertions(+), 14 deletions(-) diff --git a/drivers/ide/palm_bk3710.c b/drivers/ide/palm_bk3710.c index c7acca0b873..d1513b4a457 100644 --- a/drivers/ide/palm_bk3710.c +++ b/drivers/ide/palm_bk3710.c @@ -39,14 +39,6 @@ /* Primary Control Offset */ #define IDE_PALM_ATA_PRI_CTL_OFFSET 0x3F6 -/* - * PalmChip 3710 IDE Controller UDMA timing structure Definition - */ -struct palm_bk3710_udmatiming { - unsigned int rptime; /* Ready to pause time */ - unsigned int cycletime; /* Cycle Time */ -}; - #define BK3710_BMICP 0x00 #define BK3710_BMISP 0x02 #define BK3710_BMIDTP 0x04 @@ -75,13 +67,19 @@ struct palm_bk3710_udmatiming { static unsigned ideclk_period; /* in nanoseconds */ +struct palm_bk3710_udmatiming { + unsigned int rptime; /* tRP -- Ready to pause time (nsec) */ + unsigned int cycletime; /* tCYCTYP2/2 -- avg Cycle Time (nsec) */ + /* tENV is always a minimum of 20 nsec */ +}; + static const struct palm_bk3710_udmatiming palm_bk3710_udmatimings[6] = { - {160, 240}, /* UDMA Mode 0 */ - {125, 160}, /* UDMA Mode 1 */ - {100, 120}, /* UDMA Mode 2 */ - {100, 90}, /* UDMA Mode 3 */ - {100, 60}, /* UDMA Mode 4 */ - {85, 40}, /* UDMA Mode 5 */ + {160, 240 / 2,}, /* UDMA Mode 0 */ + {125, 160 / 2,}, /* UDMA Mode 1 */ + {100, 120 / 2,}, /* UDMA Mode 2 */ + {100, 90 / 2,}, /* UDMA Mode 3 */ + {100, 60 / 2,}, /* UDMA Mode 4 */ + {85, 40 / 2,}, /* UDMA Mode 5 */ }; static void palm_bk3710_setudmamode(void __iomem *base, unsigned int dev, -- cgit v1.2.3 From a1f9a89c90b4ac143c5b6054c2a157572b272cd2 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Wed, 22 Apr 2009 20:33:40 +0200 Subject: ide-cd: fix kernel crash on hppa regression With 2.6.30-rc2 I face a kernel crash on the 32bit hppa architecture due to ide-cd when udev creates the device nodes at startup: Kernel Fault: Code=26 regs=8ed34c40 (Addr=00000024) IASQ: 00000000 00000000 IAOQ: 1034b5ac 1034b5b0 IIR: 4ab30048 ISR: 00000000 IOR: 00000024 CPU: 0 CR30: 8ed34000 CR31: ffff55ff ORIG_R28: 00000000 IAOQ[0]: ide_complete_rq+0x2c/0x70 IAOQ[1]: ide_complete_rq+0x30/0x70 RP(r2): cdrom_newpc_intr+0x178/0x46c Backtrace: [<1035c608>] cdrom_newpc_intr+0x178/0x46c [<1034c494>] ide_intr+0x1b0/0x214 [<1016d284>] handle_IRQ_event+0x70/0x150 [<1016d4b0>] __do_IRQ+0x14c/0x1cc [<102f7864>] superio_interrupt+0x88/0xbc [<1016d284>] handle_IRQ_event+0x70/0x150 [<1016d4b0>] __do_IRQ+0x14c/0x1cc [<10112efc>] do_cpu_irq_mask+0x9c/0xd0 [<10116068>] intr_return+0x0/0x4 This crash seems to happen due to an uninitialized variable "rc". The compiler even warns about that: CC drivers/ide/ide-cd.o /mnt/sda4/home/cvs/parisc/git-kernel/linus-linux-2.6/drivers/ide/ide-cd.c: In function `cdrom_newpc_intr': /mnt/sda4/home/cvs/parisc/git-kernel/linus-linux-2.6/drivers/ide/ide-cd.c:612: warning: `rc' might be used uninitialized in this function After applying the trivial patch below, which just initializes the variable to zero, the kernel doesn't crash any longer: Starting the hotplug events dispatcher: udevd. Synthesizing the initial hotplug events... hda: command error: status=0x51 { DriveReady SeekComplete Error } hda: command error: error=0x54 <3>{ AbortedCommand LastFailedSense=0x05 } ide: failed opcode was: unknown done. Signed-off-by: Helge Deller Acked-by: Borislav Petkov Cc: Linus Cc: Kyle McMartin Cc: "Rafael J. Wysocki" Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-cd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 3aec19d1fdf..3d4e0996976 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -609,7 +609,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive) struct request *rq = hwif->rq; ide_expiry_t *expiry = NULL; int dma_error = 0, dma, thislen, uptodate = 0; - int write = (rq_data_dir(rq) == WRITE) ? 1 : 0, rc, nsectors; + int write = (rq_data_dir(rq) == WRITE) ? 1 : 0, rc = 0, nsectors; int sense = blk_sense_request(rq); unsigned int timeout; u16 len; -- cgit v1.2.3 From b0aedb04eae79372fbe101d98513773d6b89935d Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bruno=20Pr=C3=A9mont?= Date: Wed, 22 Apr 2009 20:33:41 +0200 Subject: ide: Stop disks on reboot for laptop which cuts power MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit My laptop (Acer Travelmate 660) always cuts the power when rebooting which causes the disk to emergency-park it's head. Add a dmi check to stop disk as for shutdown on this laptop. Signed-off-by: Bruno Prémont Cc: Jeff Garzik Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-gd.c | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-) diff --git a/drivers/ide/ide-gd.c b/drivers/ide/ide-gd.c index 1aebdf1a4f5..4b6b71e2cdf 100644 --- a/drivers/ide/ide-gd.c +++ b/drivers/ide/ide-gd.c @@ -7,6 +7,7 @@ #include #include #include +#include #if !defined(CONFIG_DEBUG_BLOCK_EXT_DEVT) #define IDE_DISK_MINORS (1 << PARTN_BITS) @@ -99,6 +100,19 @@ static void ide_gd_resume(ide_drive_t *drive) (void)drive->disk_ops->get_capacity(drive); } +static const struct dmi_system_id ide_coldreboot_table[] = { + { + /* Acer TravelMate 66x cuts power during reboot */ + .ident = "Acer TravelMate 660", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 660"), + }, + }, + + { } /* terminate list */ +}; + static void ide_gd_shutdown(ide_drive_t *drive) { #ifdef CONFIG_ALPHA @@ -115,7 +129,8 @@ static void ide_gd_shutdown(ide_drive_t *drive) the disk to expire its write cache. */ if (system_state != SYSTEM_POWER_OFF) { #else - if (system_state == SYSTEM_RESTART) { + if (system_state == SYSTEM_RESTART && + !dmi_check_system(ide_coldreboot_table)) { #endif drive->disk_ops->flush(drive); return; -- cgit v1.2.3 From 83cff839268feb2f31ae7667b9b2b7641dc10575 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 22 Apr 2009 20:33:41 +0200 Subject: mediabay: fix build for CONFIG_BLOCK=n MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit On Tuesday 14 April 2009 20:31:21 Subrata Modak wrote: > Observed the following build error: > --- > CC drivers/macintosh/mediabay.o > In file included from drivers/macintosh/mediabay.c:21: > include/linux/ide.h:605: error: field ‘request_sense_rq’ has incomplete > type > make[2]: *** [drivers/macintosh/mediabay.o] Error 1 > make[1]: *** [drivers/macintosh] Error 2 > make: *** [drivers] Error 2 > --- mediabay shouldn't include unconditionally so remove the superfluous include from mediabay.c ( will pull in for CONFIG_BLK_DEV_IDE_PMAC=y). Reported-by: Subrata Modak Cc: Paul Mackerras Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/macintosh/mediabay.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/macintosh/mediabay.c b/drivers/macintosh/mediabay.c index d7e46d345d9..eca55ef185b 100644 --- a/drivers/macintosh/mediabay.c +++ b/drivers/macintosh/mediabay.c @@ -18,7 +18,6 @@ #include #include #include -#include #include #include #include -- cgit v1.2.3 From 2d138ae09935cec055f65d18300727a7a46d92b9 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 9 Apr 2009 21:22:42 +0200 Subject: scsi: a4000 - Correct driver unregistration in case of failure commit 7a192ec334cab9fafe3a8665a65af398b0e24730 ("platform driver: fix incorrect use of 'platform_bus_type' with 'struct device_driver') turned a driver_UNregister into platform_driver_REGISTER. Correct this to platform_driver_UNregister. Signed-off-by: Geert Uytterhoeven --- drivers/scsi/a4000t.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/a4000t.c b/drivers/scsi/a4000t.c index 61af3d91ac8..e3519fa5a3b 100644 --- a/drivers/scsi/a4000t.c +++ b/drivers/scsi/a4000t.c @@ -129,7 +129,7 @@ static int __init a4000t_scsi_init(void) a4000t_scsi_device = platform_device_register_simple("a4000t-scsi", -1, NULL, 0); if (IS_ERR(a4000t_scsi_device)) { - platform_driver_register(&a4000t_scsi_driver); + platform_driver_unregister(&a4000t_scsi_driver); return PTR_ERR(a4000t_scsi_device); } -- cgit v1.2.3 From cc7c0fa3b90a047751f50371639b90dc119e63ea Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 9 Apr 2009 22:23:51 +0200 Subject: m68k,m68knommu: Wire up preadv and pwritev Signed-off-by: Geert Uytterhoeven Acked-by: Greg Ungerer --- arch/m68k/include/asm/unistd.h | 4 +++- arch/m68k/kernel/entry.S | 2 ++ arch/m68knommu/kernel/syscalltable.S | 2 ++ 3 files changed, 7 insertions(+), 1 deletion(-) diff --git a/arch/m68k/include/asm/unistd.h b/arch/m68k/include/asm/unistd.h index 3c19027331f..aa29a8640f7 100644 --- a/arch/m68k/include/asm/unistd.h +++ b/arch/m68k/include/asm/unistd.h @@ -332,10 +332,12 @@ #define __NR_dup3 326 #define __NR_pipe2 327 #define __NR_inotify_init1 328 +#define __NR_preadv 329 +#define __NR_pwritev 330 #ifdef __KERNEL__ -#define NR_syscalls 329 +#define NR_syscalls 331 #define __ARCH_WANT_IPC_PARSE_VERSION #define __ARCH_WANT_OLD_READDIR diff --git a/arch/m68k/kernel/entry.S b/arch/m68k/kernel/entry.S index 5c332f2b9b8..8744f60c07a 100644 --- a/arch/m68k/kernel/entry.S +++ b/arch/m68k/kernel/entry.S @@ -753,4 +753,6 @@ sys_call_table: .long sys_dup3 .long sys_pipe2 .long sys_inotify_init1 + .long sys_preadv + .long sys_pwritev /* 330 */ diff --git a/arch/m68knommu/kernel/syscalltable.S b/arch/m68knommu/kernel/syscalltable.S index 1017e76f371..c0b8782832f 100644 --- a/arch/m68knommu/kernel/syscalltable.S +++ b/arch/m68knommu/kernel/syscalltable.S @@ -347,6 +347,8 @@ ENTRY(sys_call_table) .long sys_dup3 .long sys_pipe2 .long sys_inotify_init1 + .long sys_preadv + .long sys_pwritev /* 330 */ .rept NR_syscalls-(.-sys_call_table)/4 .long sys_ni_syscall -- cgit v1.2.3 From adfe7c69891128f5e238a5e6823709b4bb85b340 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Sun, 29 Mar 2009 14:23:44 +0200 Subject: m68k: Update defconfigs for 2.6.30-rc3 Signed-off-by: Geert Uytterhoeven --- arch/m68k/configs/amiga_defconfig | 163 ++++++++++++++++++++++------------- arch/m68k/configs/apollo_defconfig | 120 +++++++++++++++++--------- arch/m68k/configs/atari_defconfig | 155 +++++++++++++++++++++------------ arch/m68k/configs/bvme6000_defconfig | 119 ++++++++++++++++--------- arch/m68k/configs/hp300_defconfig | 120 +++++++++++++++++--------- arch/m68k/configs/mac_defconfig | 125 ++++++++++++++++++--------- arch/m68k/configs/multi_defconfig | 157 ++++++++++++++++++++------------- arch/m68k/configs/mvme147_defconfig | 119 ++++++++++++++++--------- arch/m68k/configs/mvme16x_defconfig | 119 ++++++++++++++++--------- arch/m68k/configs/q40_defconfig | 122 +++++++++++++++++--------- arch/m68k/configs/sun3_defconfig | 120 +++++++++++++++++--------- arch/m68k/configs/sun3x_defconfig | 120 +++++++++++++++++--------- 12 files changed, 1034 insertions(+), 525 deletions(-) diff --git a/arch/m68k/configs/amiga_defconfig b/arch/m68k/configs/amiga_defconfig index 23597beb66c..0f69fa5ddf2 100644 --- a/arch/m68k/configs/amiga_defconfig +++ b/arch/m68k/configs/amiga_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc7 -# Tue Dec 2 20:27:42 2008 +# Linux kernel version: 2.6.30-rc3 +# Wed Apr 22 20:47:52 2009 # CONFIG_M68K=y CONFIG_MMU=y @@ -29,14 +29,24 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set CONFIG_RELAY=y CONFIG_NAMESPACES=y @@ -44,23 +54,27 @@ CONFIG_NAMESPACES=y # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -68,15 +82,16 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -84,11 +99,8 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set @@ -104,7 +116,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y # CONFIG_FREEZER is not set # @@ -140,12 +151,13 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y # # General setup @@ -157,7 +169,7 @@ CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m CONFIG_ZORRO=y CONFIG_AMIGA_PCMCIA=y -# CONFIG_HEARTBEAT is not set +CONFIG_HEARTBEAT=y CONFIG_PROC_HARDWARE=y CONFIG_ISA=y CONFIG_GENERIC_ISA_DMA=y @@ -184,7 +196,10 @@ CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_FIB_HASH=y -# CONFIG_IP_PNP is not set +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set CONFIG_NET_IPIP=m CONFIG_NET_IPGRE=m # CONFIG_ARPD is not set @@ -258,6 +273,7 @@ CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HL=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m @@ -266,6 +282,7 @@ CONFIG_NETFILTER_XT_TARGET_RATEEST=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m @@ -276,6 +293,7 @@ CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_HL=m CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m @@ -354,25 +372,20 @@ CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_RAW=m CONFIG_IP_DCCP=m CONFIG_INET_DCCP_DIAG=m -CONFIG_IP_DCCP_ACKVEC=y # # DCCP CCIDs Configuration (EXPERIMENTAL) # -CONFIG_IP_DCCP_CCID2=m # CONFIG_IP_DCCP_CCID2_DEBUG is not set -CONFIG_IP_DCCP_CCID3=m -# CONFIG_IP_DCCP_CCID3_DEBUG is not set -CONFIG_IP_DCCP_CCID3_RTO=100 -CONFIG_IP_DCCP_TFRC_LIB=m +# CONFIG_IP_DCCP_CCID3 is not set CONFIG_IP_SCTP=m # CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set @@ -394,8 +407,10 @@ CONFIG_ATALK=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y +# CONFIG_DCB is not set # # Network testing @@ -406,8 +421,8 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -453,15 +468,20 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8 CONFIG_ATA_OVER_ETH=m # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_ATAPI=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_IDE_GD=y CONFIG_IDE_GD_ATA=y @@ -469,7 +489,6 @@ CONFIG_IDE_GD_ATA=y CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y @@ -478,7 +497,6 @@ CONFIG_IDE_PROC_FS=y # # CONFIG_BLK_DEV_PLATFORM is not set CONFIG_BLK_DEV_GAYLE=y -CONFIG_BLK_DEV_IDEDOUBLER=y CONFIG_BLK_DEV_BUDDHA=y # CONFIG_BLK_DEV_IDEDMA is not set @@ -530,6 +548,8 @@ CONFIG_ISCSI_TCP=m # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_IN2000 is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_SCSI_DTC3280 is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GENERIC_NCR5380 is not set @@ -547,6 +567,7 @@ CONFIG_GVP11_SCSI=y CONFIG_SCSI_A4000T=y CONFIG_SCSI_ZORRO7XX=y # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m @@ -554,7 +575,7 @@ CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=m -CONFIG_MD_RAID5_RESHAPE=y +CONFIG_MD_RAID6_PQ=m # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m @@ -567,6 +588,7 @@ CONFIG_DM_MULTIPATH=m # CONFIG_DM_DELAY is not set CONFIG_DM_UEVENT=y CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m # CONFIG_BONDING is not set CONFIG_MACVLAN=m @@ -577,14 +599,16 @@ CONFIG_VETH=m # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y # CONFIG_MII is not set -CONFIG_ARIADNE=m -CONFIG_A2065=m -CONFIG_HYDRA=m -CONFIG_ZORRO8390=m -CONFIG_APNE=m +CONFIG_ARIADNE=y +CONFIG_A2065=y +CONFIG_HYDRA=y +CONFIG_ZORRO8390=y +CONFIG_APNE=y # CONFIG_NET_VENDOR_3COM is not set # CONFIG_NET_VENDOR_SMC is not set +# CONFIG_ETHOC is not set # CONFIG_NET_VENDOR_RACAL is not set +# CONFIG_DNET is not set # CONFIG_AT1700 is not set # CONFIG_DEPCA is not set # CONFIG_HP100 is not set @@ -609,7 +633,10 @@ CONFIG_APNE=m # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_PLIP is not set CONFIG_PPP=m @@ -719,7 +746,7 @@ CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y # CONFIG_DEVKMEM is not set # CONFIG_SERIAL_NONSTANDARD is not set -CONFIG_A2232=m +CONFIG_A2232=y # # Serial drivers @@ -730,6 +757,7 @@ CONFIG_A2232=m # Non-8250 serial port support # CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 CONFIG_PRINTER=m @@ -821,6 +849,7 @@ CONFIG_FB_FM2=y # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -856,7 +885,6 @@ CONFIG_HIDRAW=y # # Special HID drivers # -CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -867,14 +895,13 @@ CONFIG_HID_COMPAT=y # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set -CONFIG_STAGING_EXCLUDE_BUILD=y # # Character devices # CONFIG_AMIGA_BUILTIN_SERIAL=y CONFIG_MULTIFACE_III_TTY=m -# CONFIG_SERIAL_CONSOLE is not set +CONFIG_SERIAL_CONSOLE=y # # File systems @@ -883,6 +910,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT4_FS is not set CONFIG_JBD=y @@ -909,13 +937,15 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m # CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set -# CONFIG_OCFS2_COMPAT_JBD is not set +# CONFIG_OCFS2_FS_POSIX_ACL is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set +CONFIG_QUOTA_TREE=m # CONFIG_QFMT_V1 is not set # CONFIG_QFMT_V2 is not set CONFIG_QUOTACTL=y @@ -923,6 +953,11 @@ CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -935,8 +970,8 @@ CONFIG_UDF_NLS=y # # DOS/FAT/NT Filesystems # -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=m CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" @@ -954,10 +989,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_CONFIGFS_FS=m - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set CONFIG_AFFS_FS=m CONFIG_HFS_FS=m @@ -966,6 +998,9 @@ CONFIG_HFSPLUS_FS=m # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set CONFIG_CRAMFS=m +CONFIG_SQUASHFS=m +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 # CONFIG_VXFS_FS is not set CONFIG_MINIX_FS=y # CONFIG_OMFS_FS is not set @@ -976,23 +1011,24 @@ CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=m +CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +# CONFIG_ROOT_NFS is not set CONFIG_NFSD=m CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set -CONFIG_LOCKD=m +CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=m -CONFIG_SUNRPC_GSS=m -# CONFIG_SUNRPC_REGISTER_V4 is not set -CONFIG_RPCSEC_GSS_KRB5=m +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m CONFIG_SMB_NLS_DEFAULT=y @@ -1067,11 +1103,6 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y - -# -# Tracers -# -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set # @@ -1092,13 +1123,21 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=m +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_WORKQUEUE=y CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_AUTHENC=m CONFIG_CRYPTO_TEST=m @@ -1113,7 +1152,7 @@ CONFIG_CRYPTO_SEQIV=m # # Block modes # -CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_CTR=m CONFIG_CRYPTO_CTS=m CONFIG_CRYPTO_ECB=m @@ -1132,7 +1171,7 @@ CONFIG_CRYPTO_XCBC=m # CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_RMD128=m CONFIG_CRYPTO_RMD160=m @@ -1154,7 +1193,7 @@ CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_CAMELLIA=m CONFIG_CRYPTO_CAST5=m CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_DES=y CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_KHAZAD=m CONFIG_CRYPTO_SALSA20=m @@ -1168,6 +1207,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # Compression # CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # @@ -1175,11 +1215,13 @@ CONFIG_CRYPTO_LZO=m # # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m CONFIG_CRC16=m CONFIG_CRC_T10DIF=y @@ -1191,10 +1233,13 @@ CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m CONFIG_LZO_COMPRESS=m CONFIG_LZO_DECOMPRESS=m +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/m68k/configs/apollo_defconfig b/arch/m68k/configs/apollo_defconfig index 935108d115a..5fff58196b3 100644 --- a/arch/m68k/configs/apollo_defconfig +++ b/arch/m68k/configs/apollo_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc7 -# Tue Dec 2 20:27:43 2008 +# Linux kernel version: 2.6.30-rc3 +# Wed Apr 22 20:47:54 2009 # CONFIG_M68K=y CONFIG_MMU=y @@ -29,14 +29,24 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set CONFIG_RELAY=y CONFIG_NAMESPACES=y @@ -44,23 +54,27 @@ CONFIG_NAMESPACES=y # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -68,15 +82,16 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -84,11 +99,8 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set @@ -104,7 +116,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y # CONFIG_FREEZER is not set # @@ -140,12 +151,13 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y # # General setup @@ -256,6 +268,7 @@ CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HL=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m @@ -264,6 +277,7 @@ CONFIG_NETFILTER_XT_TARGET_RATEEST=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m @@ -274,6 +288,7 @@ CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_HL=m CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m @@ -352,25 +367,20 @@ CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_RAW=m CONFIG_IP_DCCP=m CONFIG_INET_DCCP_DIAG=m -CONFIG_IP_DCCP_ACKVEC=y # # DCCP CCIDs Configuration (EXPERIMENTAL) # -CONFIG_IP_DCCP_CCID2=m # CONFIG_IP_DCCP_CCID2_DEBUG is not set -CONFIG_IP_DCCP_CCID3=m -# CONFIG_IP_DCCP_CCID3_DEBUG is not set -CONFIG_IP_DCCP_CCID3_RTO=100 -CONFIG_IP_DCCP_TFRC_LIB=m +# CONFIG_IP_DCCP_CCID3 is not set CONFIG_IP_SCTP=m # CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set @@ -392,8 +402,10 @@ CONFIG_ATALK=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y +# CONFIG_DCB is not set # # Network testing @@ -404,8 +416,8 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -441,9 +453,13 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8 CONFIG_ATA_OVER_ETH=m # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -491,8 +507,11 @@ CONFIG_SCSI_SRP_ATTRS=m CONFIG_SCSI_SRP_TGT_ATTRS=y CONFIG_SCSI_LOWLEVEL=y CONFIG_ISCSI_TCP=m +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m @@ -500,7 +519,7 @@ CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=m -CONFIG_MD_RAID5_RESHAPE=y +CONFIG_MD_RAID6_PQ=m # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m @@ -513,6 +532,7 @@ CONFIG_DM_MULTIPATH=m # CONFIG_DM_DELAY is not set CONFIG_DM_UEVENT=y CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m # CONFIG_BONDING is not set CONFIG_MACVLAN=m @@ -522,6 +542,8 @@ CONFIG_VETH=m # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y # CONFIG_MII is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -538,7 +560,10 @@ CONFIG_NET_ETHERNET=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set CONFIG_PPP=m # CONFIG_PPP_MULTILINK is not set @@ -596,7 +621,6 @@ CONFIG_MOUSE_PS2=m CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set @@ -636,6 +660,7 @@ CONFIG_VT_HW_CONSOLE_BINDING=y # Non-8250 serial port support # CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set @@ -718,6 +743,7 @@ CONFIG_FB_APOLLO=y # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -749,7 +775,6 @@ CONFIG_HIDRAW=y # # Special HID drivers # -CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -757,9 +782,9 @@ CONFIG_HID_COMPAT=y # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set -CONFIG_STAGING_EXCLUDE_BUILD=y # # Character devices @@ -774,6 +799,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT4_FS is not set CONFIG_JBD=y @@ -800,13 +826,15 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m # CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set -# CONFIG_OCFS2_COMPAT_JBD is not set +# CONFIG_OCFS2_FS_POSIX_ACL is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set +CONFIG_QUOTA_TREE=m # CONFIG_QFMT_V1 is not set # CONFIG_QFMT_V2 is not set CONFIG_QUOTACTL=y @@ -814,6 +842,11 @@ CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -845,10 +878,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_CONFIGFS_FS=m - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set CONFIG_AFFS_FS=m CONFIG_HFS_FS=m @@ -857,6 +887,9 @@ CONFIG_HFSPLUS_FS=m # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set CONFIG_CRAMFS=m +CONFIG_SQUASHFS=m +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 # CONFIG_VXFS_FS is not set CONFIG_MINIX_FS=y # CONFIG_OMFS_FS is not set @@ -867,6 +900,7 @@ CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -883,7 +917,6 @@ CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -958,11 +991,6 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y - -# -# Tracers -# -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set # @@ -983,13 +1011,21 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=m +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_WORKQUEUE=y CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_AUTHENC=m CONFIG_CRYPTO_TEST=m @@ -1059,6 +1095,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # Compression # CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # @@ -1066,11 +1103,13 @@ CONFIG_CRYPTO_LZO=m # # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m CONFIG_CRC16=m CONFIG_CRC_T10DIF=y @@ -1082,10 +1121,13 @@ CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m CONFIG_LZO_COMPRESS=m CONFIG_LZO_DECOMPRESS=m +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/m68k/configs/atari_defconfig b/arch/m68k/configs/atari_defconfig index a594a1d47b6..d92a90e03ec 100644 --- a/arch/m68k/configs/atari_defconfig +++ b/arch/m68k/configs/atari_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc7 -# Tue Dec 2 20:27:44 2008 +# Linux kernel version: 2.6.30-rc3 +# Wed Apr 22 20:47:56 2009 # CONFIG_M68K=y CONFIG_MMU=y @@ -29,14 +29,24 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set CONFIG_RELAY=y CONFIG_NAMESPACES=y @@ -44,23 +54,27 @@ CONFIG_NAMESPACES=y # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -68,15 +82,16 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -84,11 +99,8 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set @@ -104,7 +116,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y # CONFIG_FREEZER is not set # @@ -140,12 +151,13 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y # # General setup @@ -180,7 +192,10 @@ CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_FIB_HASH=y -# CONFIG_IP_PNP is not set +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set CONFIG_NET_IPIP=m CONFIG_NET_IPGRE=m # CONFIG_ARPD is not set @@ -254,6 +269,7 @@ CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HL=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m @@ -262,6 +278,7 @@ CONFIG_NETFILTER_XT_TARGET_RATEEST=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m @@ -272,6 +289,7 @@ CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_HL=m CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m @@ -350,25 +368,20 @@ CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_RAW=m CONFIG_IP_DCCP=m CONFIG_INET_DCCP_DIAG=m -CONFIG_IP_DCCP_ACKVEC=y # # DCCP CCIDs Configuration (EXPERIMENTAL) # -CONFIG_IP_DCCP_CCID2=m # CONFIG_IP_DCCP_CCID2_DEBUG is not set -CONFIG_IP_DCCP_CCID3=m -# CONFIG_IP_DCCP_CCID3_DEBUG is not set -CONFIG_IP_DCCP_CCID3_RTO=100 -CONFIG_IP_DCCP_TFRC_LIB=m +# CONFIG_IP_DCCP_CCID3 is not set CONFIG_IP_SCTP=m # CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set @@ -390,8 +403,10 @@ CONFIG_ATALK=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y +# CONFIG_DCB is not set # # Network testing @@ -402,8 +417,8 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -445,15 +460,20 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8 CONFIG_ATA_OVER_ETH=m # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_ATAPI=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_IDE_GD=y CONFIG_IDE_GD_ATA=y @@ -461,7 +481,6 @@ CONFIG_IDE_GD_ATA=y CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y @@ -516,11 +535,14 @@ CONFIG_SCSI_SRP_ATTRS=m CONFIG_SCSI_SRP_TGT_ATTRS=y CONFIG_SCSI_LOWLEVEL=y CONFIG_ISCSI_TCP=m +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_SCSI_DEBUG is not set CONFIG_ATARI_SCSI=y # CONFIG_ATARI_SCSI_TOSHIBA_DELAY is not set # CONFIG_ATARI_SCSI_RESET_BOOT is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m @@ -528,7 +550,7 @@ CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=m -CONFIG_MD_RAID5_RESHAPE=y +CONFIG_MD_RAID6_PQ=m # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m @@ -541,6 +563,7 @@ CONFIG_DM_MULTIPATH=m # CONFIG_DM_DELAY is not set CONFIG_DM_UEVENT=y CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m # CONFIG_BONDING is not set CONFIG_MACVLAN=m @@ -550,7 +573,9 @@ CONFIG_VETH=m # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y -CONFIG_ATARILANCE=m +CONFIG_ATARILANCE=y +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -568,7 +593,10 @@ CONFIG_ATARILANCE=m # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_PLIP is not set CONFIG_PPP=m @@ -625,11 +653,10 @@ CONFIG_INPUT_KEYBOARD=y CONFIG_ATARI_KBD_CORE=y CONFIG_KEYBOARD_ATARI=y CONFIG_INPUT_MOUSE=y -CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_PS2=m CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set @@ -649,7 +676,7 @@ CONFIG_INPUT_M68K_BEEP=m CONFIG_SERIO=y # CONFIG_SERIO_SERPORT is not set # CONFIG_SERIO_PARKBD is not set -CONFIG_SERIO_LIBPS2=y +CONFIG_SERIO_LIBPS2=m # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set @@ -673,6 +700,7 @@ CONFIG_VT_HW_CONSOLE_BINDING=y # Non-8250 serial port support # CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 CONFIG_PRINTER=m @@ -760,6 +788,7 @@ CONFIG_FB_ATARI=y # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -794,7 +823,6 @@ CONFIG_HIDRAW=y # # Special HID drivers # -CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -805,14 +833,14 @@ CONFIG_HID_COMPAT=y # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set -CONFIG_STAGING_EXCLUDE_BUILD=y # # Character devices # -CONFIG_ATARI_MFPSER=m -CONFIG_ATARI_MIDI=m +CONFIG_ATARI_MFPSER=y +CONFIG_ATARI_MIDI=y CONFIG_ATARI_DSP56K=m +CONFIG_SERIAL_CONSOLE=y # # File systems @@ -821,6 +849,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT4_FS is not set CONFIG_JBD=y @@ -847,13 +876,15 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m # CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set -# CONFIG_OCFS2_COMPAT_JBD is not set +# CONFIG_OCFS2_FS_POSIX_ACL is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set +CONFIG_QUOTA_TREE=m # CONFIG_QFMT_V1 is not set # CONFIG_QFMT_V2 is not set CONFIG_QUOTACTL=y @@ -861,6 +892,11 @@ CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -892,10 +928,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_CONFIGFS_FS=m - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set CONFIG_AFFS_FS=m CONFIG_HFS_FS=m @@ -904,6 +937,9 @@ CONFIG_HFSPLUS_FS=m # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set CONFIG_CRAMFS=m +CONFIG_SQUASHFS=m +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 # CONFIG_VXFS_FS is not set CONFIG_MINIX_FS=y # CONFIG_OMFS_FS is not set @@ -914,22 +950,24 @@ CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=m +CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_V4 is not set +CONFIG_NFS_V4=y +# CONFIG_ROOT_NFS is not set CONFIG_NFSD=m CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set -CONFIG_LOCKD=m +CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=m -# CONFIG_SUNRPC_REGISTER_V4 is not set -# CONFIG_RPCSEC_GSS_KRB5 is not set +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m CONFIG_SMB_NLS_DEFAULT=y @@ -1004,11 +1042,6 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y - -# -# Tracers -# -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set # @@ -1029,13 +1062,21 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=m +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_WORKQUEUE=y CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_AUTHENC=m CONFIG_CRYPTO_TEST=m @@ -1050,7 +1091,7 @@ CONFIG_CRYPTO_SEQIV=m # # Block modes # -CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_CTR=m CONFIG_CRYPTO_CTS=m CONFIG_CRYPTO_ECB=m @@ -1069,7 +1110,7 @@ CONFIG_CRYPTO_XCBC=m # CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_RMD128=m CONFIG_CRYPTO_RMD160=m @@ -1091,7 +1132,7 @@ CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_CAMELLIA=m CONFIG_CRYPTO_CAST5=m CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_DES=y CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_KHAZAD=m CONFIG_CRYPTO_SALSA20=m @@ -1105,6 +1146,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # Compression # CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # @@ -1112,11 +1154,13 @@ CONFIG_CRYPTO_LZO=m # # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m CONFIG_CRC16=y CONFIG_CRC_T10DIF=y @@ -1128,10 +1172,13 @@ CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m CONFIG_LZO_COMPRESS=m CONFIG_LZO_DECOMPRESS=m +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/m68k/configs/bvme6000_defconfig b/arch/m68k/configs/bvme6000_defconfig index d3d9814a91d..6e6b1aa6668 100644 --- a/arch/m68k/configs/bvme6000_defconfig +++ b/arch/m68k/configs/bvme6000_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc7 -# Tue Dec 2 20:27:45 2008 +# Linux kernel version: 2.6.30-rc3 +# Wed Apr 22 20:47:59 2009 # CONFIG_M68K=y CONFIG_MMU=y @@ -29,14 +29,24 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set CONFIG_RELAY=y CONFIG_NAMESPACES=y @@ -44,23 +54,27 @@ CONFIG_NAMESPACES=y # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -68,15 +82,16 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -84,11 +99,8 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set @@ -104,7 +116,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y # CONFIG_FREEZER is not set # @@ -143,12 +154,13 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y # # General setup @@ -258,6 +270,7 @@ CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HL=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m @@ -266,6 +279,7 @@ CONFIG_NETFILTER_XT_TARGET_RATEEST=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m @@ -276,6 +290,7 @@ CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_HL=m CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m @@ -354,25 +369,20 @@ CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_RAW=m CONFIG_IP_DCCP=m CONFIG_INET_DCCP_DIAG=m -CONFIG_IP_DCCP_ACKVEC=y # # DCCP CCIDs Configuration (EXPERIMENTAL) # -CONFIG_IP_DCCP_CCID2=m # CONFIG_IP_DCCP_CCID2_DEBUG is not set -CONFIG_IP_DCCP_CCID3=m -# CONFIG_IP_DCCP_CCID3_DEBUG is not set -CONFIG_IP_DCCP_CCID3_RTO=100 -CONFIG_IP_DCCP_TFRC_LIB=m +# CONFIG_IP_DCCP_CCID3 is not set CONFIG_IP_SCTP=m # CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set @@ -394,8 +404,10 @@ CONFIG_ATALK=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y +# CONFIG_DCB is not set # # Network testing @@ -406,8 +418,8 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -443,9 +455,13 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8 CONFIG_ATA_OVER_ETH=m # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -493,10 +509,13 @@ CONFIG_SCSI_SRP_ATTRS=m CONFIG_SCSI_SRP_TGT_ATTRS=y CONFIG_SCSI_LOWLEVEL=y CONFIG_ISCSI_TCP=m +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set CONFIG_53C700_BE_BUS=y # CONFIG_SCSI_DEBUG is not set CONFIG_BVME6000_SCSI=y # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m @@ -504,7 +523,7 @@ CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=m -CONFIG_MD_RAID5_RESHAPE=y +CONFIG_MD_RAID6_PQ=m # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m @@ -517,6 +536,7 @@ CONFIG_DM_MULTIPATH=m # CONFIG_DM_DELAY is not set CONFIG_DM_UEVENT=y CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m # CONFIG_BONDING is not set CONFIG_MACVLAN=m @@ -527,6 +547,8 @@ CONFIG_VETH=m CONFIG_NET_ETHERNET=y # CONFIG_MII is not set CONFIG_BVME6000_NET=y +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -543,7 +565,10 @@ CONFIG_BVME6000_NET=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set CONFIG_PPP=m # CONFIG_PPP_MULTILINK is not set @@ -601,7 +626,6 @@ CONFIG_MOUSE_PS2=m CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set @@ -641,6 +665,7 @@ CONFIG_VT_HW_CONSOLE_BINDING=y # Non-8250 serial port support # CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set @@ -717,7 +742,6 @@ CONFIG_HIDRAW=y # # Special HID drivers # -CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -725,9 +749,9 @@ CONFIG_HID_COMPAT=y # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set -CONFIG_STAGING_EXCLUDE_BUILD=y # # Character devices @@ -742,6 +766,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT4_FS is not set CONFIG_JBD=y @@ -768,13 +793,15 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m # CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set -# CONFIG_OCFS2_COMPAT_JBD is not set +# CONFIG_OCFS2_FS_POSIX_ACL is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set +CONFIG_QUOTA_TREE=m # CONFIG_QFMT_V1 is not set # CONFIG_QFMT_V2 is not set CONFIG_QUOTACTL=y @@ -782,6 +809,11 @@ CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -813,10 +845,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_CONFIGFS_FS=m - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set CONFIG_AFFS_FS=m CONFIG_HFS_FS=m @@ -825,6 +854,9 @@ CONFIG_HFSPLUS_FS=m # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set CONFIG_CRAMFS=m +CONFIG_SQUASHFS=m +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 # CONFIG_VXFS_FS is not set CONFIG_MINIX_FS=y # CONFIG_OMFS_FS is not set @@ -835,6 +867,7 @@ CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -851,7 +884,6 @@ CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -927,11 +959,6 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y - -# -# Tracers -# -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set # @@ -952,13 +979,21 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=m +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_WORKQUEUE=y CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_AUTHENC=m CONFIG_CRYPTO_TEST=m @@ -1028,6 +1063,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # Compression # CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # @@ -1035,11 +1071,13 @@ CONFIG_CRYPTO_LZO=m # # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=m +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m CONFIG_CRC16=m CONFIG_CRC_T10DIF=y @@ -1051,10 +1089,13 @@ CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m CONFIG_LZO_COMPRESS=m CONFIG_LZO_DECOMPRESS=m +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/m68k/configs/hp300_defconfig b/arch/m68k/configs/hp300_defconfig index 5556ef088d0..bc0565f63a1 100644 --- a/arch/m68k/configs/hp300_defconfig +++ b/arch/m68k/configs/hp300_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc7 -# Tue Dec 2 20:27:46 2008 +# Linux kernel version: 2.6.30-rc3 +# Wed Apr 22 20:48:01 2009 # CONFIG_M68K=y CONFIG_MMU=y @@ -29,14 +29,24 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set CONFIG_RELAY=y CONFIG_NAMESPACES=y @@ -44,23 +54,27 @@ CONFIG_NAMESPACES=y # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -68,15 +82,16 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -84,11 +99,8 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set @@ -104,7 +116,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y # CONFIG_FREEZER is not set # @@ -141,12 +152,13 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y # # General setup @@ -257,6 +269,7 @@ CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HL=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m @@ -265,6 +278,7 @@ CONFIG_NETFILTER_XT_TARGET_RATEEST=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m @@ -275,6 +289,7 @@ CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_HL=m CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m @@ -353,25 +368,20 @@ CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_RAW=m CONFIG_IP_DCCP=m CONFIG_INET_DCCP_DIAG=m -CONFIG_IP_DCCP_ACKVEC=y # # DCCP CCIDs Configuration (EXPERIMENTAL) # -CONFIG_IP_DCCP_CCID2=m # CONFIG_IP_DCCP_CCID2_DEBUG is not set -CONFIG_IP_DCCP_CCID3=m -# CONFIG_IP_DCCP_CCID3_DEBUG is not set -CONFIG_IP_DCCP_CCID3_RTO=100 -CONFIG_IP_DCCP_TFRC_LIB=m +# CONFIG_IP_DCCP_CCID3 is not set CONFIG_IP_SCTP=m # CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set @@ -393,8 +403,10 @@ CONFIG_ATALK=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y +# CONFIG_DCB is not set # # Network testing @@ -405,8 +417,8 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -442,9 +454,13 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8 CONFIG_ATA_OVER_ETH=m # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -492,8 +508,11 @@ CONFIG_SCSI_SRP_ATTRS=m CONFIG_SCSI_SRP_TGT_ATTRS=y CONFIG_SCSI_LOWLEVEL=y CONFIG_ISCSI_TCP=m +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m @@ -501,7 +520,7 @@ CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=m -CONFIG_MD_RAID5_RESHAPE=y +CONFIG_MD_RAID6_PQ=m # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m @@ -514,6 +533,7 @@ CONFIG_DM_MULTIPATH=m # CONFIG_DM_DELAY is not set CONFIG_DM_UEVENT=y CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m # CONFIG_BONDING is not set CONFIG_MACVLAN=m @@ -524,6 +544,8 @@ CONFIG_VETH=m CONFIG_NET_ETHERNET=y # CONFIG_MII is not set CONFIG_HPLANCE=y +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -540,7 +562,10 @@ CONFIG_HPLANCE=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set CONFIG_PPP=m # CONFIG_PPP_MULTILINK is not set @@ -600,7 +625,6 @@ CONFIG_MOUSE_PS2=m CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set @@ -646,6 +670,7 @@ CONFIG_VT_HW_CONSOLE_BINDING=y # Non-8250 serial port support # CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set @@ -728,6 +753,7 @@ CONFIG_FB_HP300=y # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -759,7 +785,6 @@ CONFIG_HIDRAW=y # # Special HID drivers # -CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -767,9 +792,9 @@ CONFIG_HID_COMPAT=y # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set -CONFIG_STAGING_EXCLUDE_BUILD=y # # Character devices @@ -782,6 +807,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT4_FS is not set CONFIG_JBD=y @@ -808,13 +834,15 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m # CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set -# CONFIG_OCFS2_COMPAT_JBD is not set +# CONFIG_OCFS2_FS_POSIX_ACL is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set +CONFIG_QUOTA_TREE=m # CONFIG_QFMT_V1 is not set # CONFIG_QFMT_V2 is not set CONFIG_QUOTACTL=y @@ -822,6 +850,11 @@ CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -853,10 +886,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_CONFIGFS_FS=m - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set CONFIG_AFFS_FS=m CONFIG_HFS_FS=m @@ -865,6 +895,9 @@ CONFIG_HFSPLUS_FS=m # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set CONFIG_CRAMFS=m +CONFIG_SQUASHFS=m +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 # CONFIG_VXFS_FS is not set CONFIG_MINIX_FS=y # CONFIG_OMFS_FS is not set @@ -875,6 +908,7 @@ CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -891,7 +925,6 @@ CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -966,11 +999,6 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y - -# -# Tracers -# -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set # @@ -991,13 +1019,21 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=m +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_WORKQUEUE=y CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_AUTHENC=m CONFIG_CRYPTO_TEST=m @@ -1067,6 +1103,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # Compression # CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # @@ -1074,11 +1111,13 @@ CONFIG_CRYPTO_LZO=m # # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m CONFIG_CRC16=m CONFIG_CRC_T10DIF=y @@ -1090,10 +1129,13 @@ CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m CONFIG_LZO_COMPRESS=m CONFIG_LZO_DECOMPRESS=m +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/m68k/configs/mac_defconfig b/arch/m68k/configs/mac_defconfig index c6de25724a2..9991b64fea5 100644 --- a/arch/m68k/configs/mac_defconfig +++ b/arch/m68k/configs/mac_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc7 -# Tue Dec 2 20:27:47 2008 +# Linux kernel version: 2.6.30-rc3 +# Wed Apr 22 20:48:03 2009 # CONFIG_M68K=y CONFIG_MMU=y @@ -29,14 +29,24 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set CONFIG_RELAY=y CONFIG_NAMESPACES=y @@ -44,23 +54,27 @@ CONFIG_NAMESPACES=y # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -68,15 +82,16 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -84,11 +99,8 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set @@ -104,7 +116,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y # CONFIG_FREEZER is not set # @@ -142,12 +153,13 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y # # General setup @@ -255,6 +267,7 @@ CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HL=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m @@ -263,6 +276,7 @@ CONFIG_NETFILTER_XT_TARGET_RATEEST=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m @@ -273,6 +287,7 @@ CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_HL=m CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m @@ -351,25 +366,20 @@ CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_RAW=m CONFIG_IP_DCCP=m CONFIG_INET_DCCP_DIAG=m -CONFIG_IP_DCCP_ACKVEC=y # # DCCP CCIDs Configuration (EXPERIMENTAL) # -CONFIG_IP_DCCP_CCID2=m # CONFIG_IP_DCCP_CCID2_DEBUG is not set -CONFIG_IP_DCCP_CCID3=m -# CONFIG_IP_DCCP_CCID3_DEBUG is not set -CONFIG_IP_DCCP_CCID3_RTO=100 -CONFIG_IP_DCCP_TFRC_LIB=m +# CONFIG_IP_DCCP_CCID3 is not set CONFIG_IP_SCTP=m # CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set @@ -394,8 +404,10 @@ CONFIG_IPDDP_DECAP=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y +# CONFIG_DCB is not set # # Network testing @@ -406,8 +418,8 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -429,6 +441,7 @@ CONFIG_CONNECTOR=m # CONFIG_MTD is not set # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y +CONFIG_BLK_DEV_SWIM=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m @@ -443,15 +456,20 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8 CONFIG_ATA_OVER_ETH=m # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_ATAPI=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_IDE_GD=y CONFIG_IDE_GD_ATA=y @@ -459,7 +477,6 @@ CONFIG_IDE_GD_ATA=y CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y @@ -514,10 +531,13 @@ CONFIG_SCSI_SRP_ATTRS=m CONFIG_SCSI_SRP_TGT_ATTRS=y CONFIG_SCSI_LOWLEVEL=y CONFIG_ISCSI_TCP=m +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_SCSI_DEBUG is not set CONFIG_MAC_SCSI=y CONFIG_SCSI_MAC_ESP=y # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m @@ -525,7 +545,7 @@ CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=m -CONFIG_MD_RAID5_RESHAPE=y +CONFIG_MD_RAID6_PQ=m # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m @@ -547,6 +567,7 @@ CONFIG_ADB_CUDA=y CONFIG_INPUT_ADBHID=y CONFIG_MAC_EMUMOUSEBTN=y CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m # CONFIG_BONDING is not set CONFIG_MACVLAN=m @@ -561,6 +582,8 @@ CONFIG_MAC89x0=m CONFIG_MACSONIC=m CONFIG_MACMACE=y # CONFIG_NET_VENDOR_SMC is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -577,7 +600,10 @@ CONFIG_MACMACE=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set CONFIG_PPP=m # CONFIG_PPP_MULTILINK is not set @@ -635,7 +661,6 @@ CONFIG_MOUSE_PS2=m CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set @@ -677,6 +702,7 @@ CONFIG_VT_HW_CONSOLE_BINDING=y # Non-8250 serial port support # CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set @@ -760,6 +786,7 @@ CONFIG_FB_MAC=y # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -793,7 +820,6 @@ CONFIG_HIDRAW=y # # Special HID drivers # -CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -801,9 +827,9 @@ CONFIG_HID_COMPAT=y # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set -CONFIG_STAGING_EXCLUDE_BUILD=y # # Character devices @@ -819,6 +845,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT4_FS is not set CONFIG_JBD=y @@ -845,13 +872,15 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m # CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set -# CONFIG_OCFS2_COMPAT_JBD is not set +# CONFIG_OCFS2_FS_POSIX_ACL is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set +CONFIG_QUOTA_TREE=m # CONFIG_QFMT_V1 is not set # CONFIG_QFMT_V2 is not set CONFIG_QUOTACTL=y @@ -859,6 +888,11 @@ CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -890,10 +924,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_CONFIGFS_FS=m - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set CONFIG_AFFS_FS=m CONFIG_HFS_FS=y @@ -902,6 +933,9 @@ CONFIG_HFSPLUS_FS=y # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set CONFIG_CRAMFS=m +CONFIG_SQUASHFS=m +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 # CONFIG_VXFS_FS is not set CONFIG_MINIX_FS=y # CONFIG_OMFS_FS is not set @@ -912,6 +946,7 @@ CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=m CONFIG_NFS_V3=y @@ -927,7 +962,6 @@ CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m CONFIG_SUNRPC_GSS=m -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=m # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -1003,11 +1037,6 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y - -# -# Tracers -# -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set # @@ -1028,13 +1057,21 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y -CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=m +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_WORKQUEUE=y CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_AUTHENC=m CONFIG_CRYPTO_TEST=m @@ -1104,6 +1141,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # Compression # CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # @@ -1111,11 +1149,13 @@ CONFIG_CRYPTO_LZO=m # # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m CONFIG_CRC16=m CONFIG_CRC_T10DIF=y @@ -1127,10 +1167,13 @@ CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m CONFIG_LZO_COMPRESS=m CONFIG_LZO_DECOMPRESS=m +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/m68k/configs/multi_defconfig b/arch/m68k/configs/multi_defconfig index 70693588031..69c43e2d8b4 100644 --- a/arch/m68k/configs/multi_defconfig +++ b/arch/m68k/configs/multi_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc7 -# Tue Dec 2 20:27:48 2008 +# Linux kernel version: 2.6.30-rc3 +# Wed Apr 22 20:48:06 2009 # CONFIG_M68K=y CONFIG_MMU=y @@ -29,14 +29,24 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set CONFIG_RELAY=y CONFIG_NAMESPACES=y @@ -44,23 +54,27 @@ CONFIG_NAMESPACES=y # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -68,15 +82,16 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -84,11 +99,8 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set @@ -104,7 +116,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y # CONFIG_FREEZER is not set # @@ -146,12 +157,13 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y # # General setup @@ -268,6 +280,7 @@ CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HL=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m @@ -276,6 +289,7 @@ CONFIG_NETFILTER_XT_TARGET_RATEEST=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m @@ -286,6 +300,7 @@ CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_HL=m CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m @@ -364,25 +379,20 @@ CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_RAW=m CONFIG_IP_DCCP=m CONFIG_INET_DCCP_DIAG=m -CONFIG_IP_DCCP_ACKVEC=y # # DCCP CCIDs Configuration (EXPERIMENTAL) # -CONFIG_IP_DCCP_CCID2=m # CONFIG_IP_DCCP_CCID2_DEBUG is not set -CONFIG_IP_DCCP_CCID3=m -# CONFIG_IP_DCCP_CCID3_DEBUG is not set -CONFIG_IP_DCCP_CCID3_RTO=100 -CONFIG_IP_DCCP_TFRC_LIB=m +# CONFIG_IP_DCCP_CCID3 is not set CONFIG_IP_SCTP=m # CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set @@ -408,8 +418,10 @@ CONFIG_IPDDP_DECAP=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y +# CONFIG_DCB is not set # # Network testing @@ -420,8 +432,8 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -454,6 +466,7 @@ CONFIG_PARPORT_NOT_PC=y CONFIG_BLK_DEV=y CONFIG_AMIGA_FLOPPY=y CONFIG_ATARI_FLOPPY=y +CONFIG_BLK_DEV_SWIM=y CONFIG_AMIGA_Z2RAM=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y @@ -469,15 +482,20 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8 CONFIG_ATA_OVER_ETH=m # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_ATAPI=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_IDE_GD=y CONFIG_IDE_GD_ATA=y @@ -485,7 +503,6 @@ CONFIG_IDE_GD_ATA=y CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y @@ -494,7 +511,6 @@ CONFIG_IDE_PROC_FS=y # # CONFIG_BLK_DEV_PLATFORM is not set CONFIG_BLK_DEV_GAYLE=y -CONFIG_BLK_DEV_IDEDOUBLER=y CONFIG_BLK_DEV_BUDDHA=y CONFIG_BLK_DEV_FALCON_IDE=y CONFIG_BLK_DEV_MAC_IDE=y @@ -549,6 +565,8 @@ CONFIG_ISCSI_TCP=m # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_IN2000 is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_SCSI_DTC3280 is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GENERIC_NCR5380 is not set @@ -575,6 +593,7 @@ CONFIG_MVME16x_SCSI=y CONFIG_BVME6000_SCSI=y CONFIG_SUN3X_ESP=y # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m @@ -582,7 +601,7 @@ CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=m -CONFIG_MD_RAID5_RESHAPE=y +CONFIG_MD_RAID6_PQ=m # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m @@ -604,6 +623,7 @@ CONFIG_ADB_CUDA=y CONFIG_INPUT_ADBHID=y CONFIG_MAC_EMUMOUSEBTN=y CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m # CONFIG_BONDING is not set CONFIG_MACVLAN=m @@ -614,24 +634,26 @@ CONFIG_VETH=m # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y -CONFIG_ARIADNE=m -CONFIG_A2065=m -CONFIG_HYDRA=m -CONFIG_ZORRO8390=m -CONFIG_APNE=m +CONFIG_ARIADNE=y +CONFIG_A2065=y +CONFIG_HYDRA=y +CONFIG_ZORRO8390=y +CONFIG_APNE=y CONFIG_MAC8390=y -CONFIG_MAC89x0=m -CONFIG_MACSONIC=m +CONFIG_MAC89x0=y +CONFIG_MACSONIC=y CONFIG_MACMACE=y CONFIG_MVME147_NET=y CONFIG_MVME16x_NET=y CONFIG_BVME6000_NET=y -CONFIG_ATARILANCE=m +CONFIG_ATARILANCE=y CONFIG_SUN3LANCE=y CONFIG_HPLANCE=y # CONFIG_NET_VENDOR_3COM is not set # CONFIG_NET_VENDOR_SMC is not set +# CONFIG_ETHOC is not set # CONFIG_NET_VENDOR_RACAL is not set +# CONFIG_DNET is not set # CONFIG_AT1700 is not set # CONFIG_DEPCA is not set # CONFIG_HP100 is not set @@ -657,7 +679,10 @@ CONFIG_NE2000=m # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_PLIP is not set CONFIG_PPP=m @@ -717,11 +742,10 @@ CONFIG_KEYBOARD_ATARI=y CONFIG_KEYBOARD_HIL_OLD=y CONFIG_KEYBOARD_HIL=y CONFIG_INPUT_MOUSE=y -CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_PS2=m CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set @@ -732,7 +756,7 @@ CONFIG_MOUSE_SERIAL=m CONFIG_MOUSE_AMIGA=m CONFIG_MOUSE_ATARI=m # CONFIG_MOUSE_VSXXXAA is not set -CONFIG_MOUSE_HIL=m +CONFIG_MOUSE_HIL=y CONFIG_INPUT_JOYSTICK=y # CONFIG_JOYSTICK_ANALOG is not set # CONFIG_JOYSTICK_A3D is not set @@ -763,18 +787,18 @@ CONFIG_JOYSTICK_AMIGA=m CONFIG_INPUT_MISC=y CONFIG_INPUT_M68K_BEEP=m # CONFIG_INPUT_UINPUT is not set -CONFIG_HP_SDC_RTC=m +CONFIG_HP_SDC_RTC=y # # Hardware I/O ports # CONFIG_SERIO=y # CONFIG_SERIO_SERPORT is not set -CONFIG_SERIO_Q40KBD=m +CONFIG_SERIO_Q40KBD=y # CONFIG_SERIO_PARKBD is not set CONFIG_HP_SDC=y CONFIG_HIL_MLC=y -CONFIG_SERIO_LIBPS2=y +CONFIG_SERIO_LIBPS2=m # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set @@ -788,7 +812,7 @@ CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y # CONFIG_DEVKMEM is not set # CONFIG_SERIAL_NONSTANDARD is not set -CONFIG_A2232=m +CONFIG_A2232=y # # Serial drivers @@ -799,6 +823,7 @@ CONFIG_A2232=m # Non-8250 serial port support # CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 CONFIG_PRINTER=m @@ -807,7 +832,7 @@ CONFIG_PRINTER=m # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set CONFIG_NVRAM=y -CONFIG_GEN_RTC=m +CONFIG_GEN_RTC=y CONFIG_GEN_RTC_X=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set @@ -898,6 +923,7 @@ CONFIG_FB_HP300=y # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -937,7 +963,6 @@ CONFIG_HIDRAW=y # # Special HID drivers # -CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -948,13 +973,12 @@ CONFIG_HID_COMPAT=y # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set -CONFIG_STAGING_EXCLUDE_BUILD=y # # Character devices # -CONFIG_ATARI_MFPSER=m -CONFIG_ATARI_MIDI=m +CONFIG_ATARI_MFPSER=y +CONFIG_ATARI_MIDI=y CONFIG_ATARI_DSP56K=m CONFIG_AMIGA_BUILTIN_SERIAL=y CONFIG_MULTIFACE_III_TTY=m @@ -974,6 +998,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT4_FS is not set CONFIG_JBD=y @@ -1000,13 +1025,15 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m # CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set -# CONFIG_OCFS2_COMPAT_JBD is not set +# CONFIG_OCFS2_FS_POSIX_ACL is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set +CONFIG_QUOTA_TREE=m # CONFIG_QFMT_V1 is not set # CONFIG_QFMT_V2 is not set CONFIG_QUOTACTL=y @@ -1014,6 +1041,11 @@ CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1045,10 +1077,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_CONFIGFS_FS=m - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set CONFIG_AFFS_FS=m CONFIG_HFS_FS=y @@ -1057,6 +1086,9 @@ CONFIG_HFSPLUS_FS=y # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set CONFIG_CRAMFS=m +CONFIG_SQUASHFS=m +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 # CONFIG_VXFS_FS is not set CONFIG_MINIX_FS=y # CONFIG_OMFS_FS is not set @@ -1067,6 +1099,7 @@ CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1083,7 +1116,6 @@ CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -1163,11 +1195,6 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y - -# -# Tracers -# -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set # @@ -1188,13 +1215,21 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=m +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_WORKQUEUE=y CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_AUTHENC=m CONFIG_CRYPTO_TEST=m @@ -1264,6 +1299,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # Compression # CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # @@ -1271,11 +1307,13 @@ CONFIG_CRYPTO_LZO=m # # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m CONFIG_CRC16=y CONFIG_CRC_T10DIF=y @@ -1287,10 +1325,13 @@ CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m CONFIG_LZO_COMPRESS=m CONFIG_LZO_DECOMPRESS=m +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/m68k/configs/mvme147_defconfig b/arch/m68k/configs/mvme147_defconfig index 52d42715bd0..7dceb5d7122 100644 --- a/arch/m68k/configs/mvme147_defconfig +++ b/arch/m68k/configs/mvme147_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc7 -# Tue Dec 2 20:27:50 2008 +# Linux kernel version: 2.6.30-rc3 +# Wed Apr 22 20:48:08 2009 # CONFIG_M68K=y CONFIG_MMU=y @@ -29,14 +29,24 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set CONFIG_RELAY=y CONFIG_NAMESPACES=y @@ -44,23 +54,27 @@ CONFIG_NAMESPACES=y # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -68,15 +82,16 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -84,11 +99,8 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set @@ -104,7 +116,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y # CONFIG_FREEZER is not set # @@ -143,12 +154,13 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y # # General setup @@ -258,6 +270,7 @@ CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HL=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m @@ -266,6 +279,7 @@ CONFIG_NETFILTER_XT_TARGET_RATEEST=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m @@ -276,6 +290,7 @@ CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_HL=m CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m @@ -354,25 +369,20 @@ CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_RAW=m CONFIG_IP_DCCP=m CONFIG_INET_DCCP_DIAG=m -CONFIG_IP_DCCP_ACKVEC=y # # DCCP CCIDs Configuration (EXPERIMENTAL) # -CONFIG_IP_DCCP_CCID2=m # CONFIG_IP_DCCP_CCID2_DEBUG is not set -CONFIG_IP_DCCP_CCID3=m -# CONFIG_IP_DCCP_CCID3_DEBUG is not set -CONFIG_IP_DCCP_CCID3_RTO=100 -CONFIG_IP_DCCP_TFRC_LIB=m +# CONFIG_IP_DCCP_CCID3 is not set CONFIG_IP_SCTP=m # CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set @@ -394,8 +404,10 @@ CONFIG_ATALK=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y +# CONFIG_DCB is not set # # Network testing @@ -406,8 +418,8 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -443,9 +455,13 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8 CONFIG_ATA_OVER_ETH=m # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -493,9 +509,12 @@ CONFIG_SCSI_SRP_ATTRS=m CONFIG_SCSI_SRP_TGT_ATTRS=y CONFIG_SCSI_LOWLEVEL=y CONFIG_ISCSI_TCP=m +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_SCSI_DEBUG is not set CONFIG_MVME147_SCSI=y # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m @@ -503,7 +522,7 @@ CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=m -CONFIG_MD_RAID5_RESHAPE=y +CONFIG_MD_RAID6_PQ=m # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m @@ -516,6 +535,7 @@ CONFIG_DM_MULTIPATH=m # CONFIG_DM_DELAY is not set CONFIG_DM_UEVENT=y CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m # CONFIG_BONDING is not set CONFIG_MACVLAN=m @@ -526,6 +546,8 @@ CONFIG_VETH=m CONFIG_NET_ETHERNET=y # CONFIG_MII is not set CONFIG_MVME147_NET=y +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -542,7 +564,10 @@ CONFIG_MVME147_NET=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set CONFIG_PPP=m # CONFIG_PPP_MULTILINK is not set @@ -600,7 +625,6 @@ CONFIG_MOUSE_PS2=m CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set @@ -640,6 +664,7 @@ CONFIG_VT_HW_CONSOLE_BINDING=y # Non-8250 serial port support # CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set @@ -716,7 +741,6 @@ CONFIG_HIDRAW=y # # Special HID drivers # -CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -724,9 +748,9 @@ CONFIG_HID_COMPAT=y # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set -CONFIG_STAGING_EXCLUDE_BUILD=y # # Character devices @@ -741,6 +765,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT4_FS is not set CONFIG_JBD=y @@ -767,13 +792,15 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m # CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set -# CONFIG_OCFS2_COMPAT_JBD is not set +# CONFIG_OCFS2_FS_POSIX_ACL is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set +CONFIG_QUOTA_TREE=m # CONFIG_QFMT_V1 is not set # CONFIG_QFMT_V2 is not set CONFIG_QUOTACTL=y @@ -781,6 +808,11 @@ CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -812,10 +844,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_CONFIGFS_FS=m - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set CONFIG_AFFS_FS=m CONFIG_HFS_FS=m @@ -824,6 +853,9 @@ CONFIG_HFSPLUS_FS=m # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set CONFIG_CRAMFS=m +CONFIG_SQUASHFS=m +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 # CONFIG_VXFS_FS is not set CONFIG_MINIX_FS=y # CONFIG_OMFS_FS is not set @@ -834,6 +866,7 @@ CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -850,7 +883,6 @@ CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -926,11 +958,6 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y - -# -# Tracers -# -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set # @@ -951,13 +978,21 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=m +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_WORKQUEUE=y CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_AUTHENC=m CONFIG_CRYPTO_TEST=m @@ -1027,6 +1062,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # Compression # CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # @@ -1034,11 +1070,13 @@ CONFIG_CRYPTO_LZO=m # # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m CONFIG_CRC16=m CONFIG_CRC_T10DIF=y @@ -1050,10 +1088,13 @@ CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m CONFIG_LZO_COMPRESS=m CONFIG_LZO_DECOMPRESS=m +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/m68k/configs/mvme16x_defconfig b/arch/m68k/configs/mvme16x_defconfig index 3403ed2eda7..890594fcacb 100644 --- a/arch/m68k/configs/mvme16x_defconfig +++ b/arch/m68k/configs/mvme16x_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc7 -# Tue Dec 2 20:27:51 2008 +# Linux kernel version: 2.6.30-rc3 +# Wed Apr 22 20:48:10 2009 # CONFIG_M68K=y CONFIG_MMU=y @@ -29,14 +29,24 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set CONFIG_RELAY=y CONFIG_NAMESPACES=y @@ -44,23 +54,27 @@ CONFIG_NAMESPACES=y # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -68,15 +82,16 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -84,11 +99,8 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set @@ -104,7 +116,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y # CONFIG_FREEZER is not set # @@ -143,12 +154,13 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y # # General setup @@ -258,6 +270,7 @@ CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HL=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m @@ -266,6 +279,7 @@ CONFIG_NETFILTER_XT_TARGET_RATEEST=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m @@ -276,6 +290,7 @@ CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_HL=m CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m @@ -354,25 +369,20 @@ CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_RAW=m CONFIG_IP_DCCP=m CONFIG_INET_DCCP_DIAG=m -CONFIG_IP_DCCP_ACKVEC=y # # DCCP CCIDs Configuration (EXPERIMENTAL) # -CONFIG_IP_DCCP_CCID2=m # CONFIG_IP_DCCP_CCID2_DEBUG is not set -CONFIG_IP_DCCP_CCID3=m -# CONFIG_IP_DCCP_CCID3_DEBUG is not set -CONFIG_IP_DCCP_CCID3_RTO=100 -CONFIG_IP_DCCP_TFRC_LIB=m +# CONFIG_IP_DCCP_CCID3 is not set CONFIG_IP_SCTP=m # CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set @@ -394,8 +404,10 @@ CONFIG_ATALK=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y +# CONFIG_DCB is not set # # Network testing @@ -406,8 +418,8 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -443,9 +455,13 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8 CONFIG_ATA_OVER_ETH=m # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -493,10 +509,13 @@ CONFIG_SCSI_SRP_ATTRS=m CONFIG_SCSI_SRP_TGT_ATTRS=y CONFIG_SCSI_LOWLEVEL=y CONFIG_ISCSI_TCP=m +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set CONFIG_53C700_BE_BUS=y # CONFIG_SCSI_DEBUG is not set CONFIG_MVME16x_SCSI=y # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m @@ -504,7 +523,7 @@ CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=m -CONFIG_MD_RAID5_RESHAPE=y +CONFIG_MD_RAID6_PQ=m # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m @@ -517,6 +536,7 @@ CONFIG_DM_MULTIPATH=m # CONFIG_DM_DELAY is not set CONFIG_DM_UEVENT=y CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m # CONFIG_BONDING is not set CONFIG_MACVLAN=m @@ -527,6 +547,8 @@ CONFIG_VETH=m CONFIG_NET_ETHERNET=y # CONFIG_MII is not set CONFIG_MVME16x_NET=y +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -543,7 +565,10 @@ CONFIG_MVME16x_NET=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set CONFIG_PPP=m # CONFIG_PPP_MULTILINK is not set @@ -601,7 +626,6 @@ CONFIG_MOUSE_PS2=m CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set @@ -641,6 +665,7 @@ CONFIG_VT_HW_CONSOLE_BINDING=y # Non-8250 serial port support # CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set @@ -717,7 +742,6 @@ CONFIG_HIDRAW=y # # Special HID drivers # -CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -725,9 +749,9 @@ CONFIG_HID_COMPAT=y # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set -CONFIG_STAGING_EXCLUDE_BUILD=y # # Character devices @@ -743,6 +767,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT4_FS is not set CONFIG_JBD=y @@ -769,13 +794,15 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m # CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set -# CONFIG_OCFS2_COMPAT_JBD is not set +# CONFIG_OCFS2_FS_POSIX_ACL is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set +CONFIG_QUOTA_TREE=m # CONFIG_QFMT_V1 is not set # CONFIG_QFMT_V2 is not set CONFIG_QUOTACTL=y @@ -783,6 +810,11 @@ CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -814,10 +846,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_CONFIGFS_FS=m - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set CONFIG_AFFS_FS=m CONFIG_HFS_FS=m @@ -826,6 +855,9 @@ CONFIG_HFSPLUS_FS=m # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set CONFIG_CRAMFS=m +CONFIG_SQUASHFS=m +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 # CONFIG_VXFS_FS is not set CONFIG_MINIX_FS=y # CONFIG_OMFS_FS is not set @@ -836,6 +868,7 @@ CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -852,7 +885,6 @@ CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -928,11 +960,6 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y - -# -# Tracers -# -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set # @@ -953,13 +980,21 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=m +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_WORKQUEUE=y CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_AUTHENC=m CONFIG_CRYPTO_TEST=m @@ -1029,6 +1064,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # Compression # CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # @@ -1036,11 +1072,13 @@ CONFIG_CRYPTO_LZO=m # # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m CONFIG_CRC16=m CONFIG_CRC_T10DIF=y @@ -1052,10 +1090,13 @@ CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m CONFIG_LZO_COMPRESS=m CONFIG_LZO_DECOMPRESS=m +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/m68k/configs/q40_defconfig b/arch/m68k/configs/q40_defconfig index 3459c594194..7cf58c27ff8 100644 --- a/arch/m68k/configs/q40_defconfig +++ b/arch/m68k/configs/q40_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc7 -# Tue Dec 2 20:27:52 2008 +# Linux kernel version: 2.6.30-rc3 +# Wed Apr 22 20:48:13 2009 # CONFIG_M68K=y CONFIG_MMU=y @@ -29,14 +29,24 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set CONFIG_RELAY=y CONFIG_NAMESPACES=y @@ -44,23 +54,27 @@ CONFIG_NAMESPACES=y # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -68,15 +82,16 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -84,11 +99,8 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set @@ -104,7 +116,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y # CONFIG_FREEZER is not set # @@ -140,12 +151,13 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y # # General setup @@ -255,6 +267,7 @@ CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HL=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m @@ -263,6 +276,7 @@ CONFIG_NETFILTER_XT_TARGET_RATEEST=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m @@ -273,6 +287,7 @@ CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_HL=m CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m @@ -351,25 +366,20 @@ CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_RAW=m CONFIG_IP_DCCP=m CONFIG_INET_DCCP_DIAG=m -CONFIG_IP_DCCP_ACKVEC=y # # DCCP CCIDs Configuration (EXPERIMENTAL) # -CONFIG_IP_DCCP_CCID2=m # CONFIG_IP_DCCP_CCID2_DEBUG is not set -CONFIG_IP_DCCP_CCID3=m -# CONFIG_IP_DCCP_CCID3_DEBUG is not set -CONFIG_IP_DCCP_CCID3_RTO=100 -CONFIG_IP_DCCP_TFRC_LIB=m +# CONFIG_IP_DCCP_CCID3 is not set CONFIG_IP_SCTP=m # CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set @@ -391,8 +401,10 @@ CONFIG_ATALK=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y +# CONFIG_DCB is not set # # Network testing @@ -403,8 +415,8 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -441,15 +453,20 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8 CONFIG_ATA_OVER_ETH=m # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_ATAPI=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_IDE_GD=y CONFIG_IDE_GD_ATA=y @@ -457,7 +474,6 @@ CONFIG_IDE_GD_ATA=y CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y @@ -516,6 +532,8 @@ CONFIG_ISCSI_TCP=m # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_IN2000 is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_SCSI_DTC3280 is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GENERIC_NCR5380 is not set @@ -527,6 +545,7 @@ CONFIG_ISCSI_TCP=m # CONFIG_SCSI_T128 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m @@ -534,7 +553,7 @@ CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=m -CONFIG_MD_RAID5_RESHAPE=y +CONFIG_MD_RAID6_PQ=m # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m @@ -547,6 +566,7 @@ CONFIG_DM_MULTIPATH=m # CONFIG_DM_DELAY is not set CONFIG_DM_UEVENT=y CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m # CONFIG_BONDING is not set CONFIG_MACVLAN=m @@ -559,7 +579,9 @@ CONFIG_NET_ETHERNET=y # CONFIG_MII is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_NET_VENDOR_SMC is not set +# CONFIG_ETHOC is not set # CONFIG_NET_VENDOR_RACAL is not set +# CONFIG_DNET is not set # CONFIG_AT1700 is not set # CONFIG_DEPCA is not set # CONFIG_HP100 is not set @@ -584,7 +606,10 @@ CONFIG_NE2000=m # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set CONFIG_PPP=m # CONFIG_PPP_MULTILINK is not set @@ -642,7 +667,6 @@ CONFIG_MOUSE_PS2=m CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set @@ -688,6 +712,7 @@ CONFIG_VT_HW_CONSOLE_BINDING=y # Non-8250 serial port support # CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set @@ -771,6 +796,7 @@ CONFIG_FB_Q40=y # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -805,7 +831,6 @@ CONFIG_HIDRAW=y # # Special HID drivers # -CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -813,9 +838,9 @@ CONFIG_HID_COMPAT=y # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set -CONFIG_STAGING_EXCLUDE_BUILD=y # # Character devices @@ -828,6 +853,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT4_FS is not set CONFIG_JBD=y @@ -854,13 +880,15 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m # CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set -# CONFIG_OCFS2_COMPAT_JBD is not set +# CONFIG_OCFS2_FS_POSIX_ACL is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set +CONFIG_QUOTA_TREE=m # CONFIG_QFMT_V1 is not set # CONFIG_QFMT_V2 is not set CONFIG_QUOTACTL=y @@ -868,6 +896,11 @@ CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -899,10 +932,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_CONFIGFS_FS=m - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set CONFIG_AFFS_FS=m CONFIG_HFS_FS=m @@ -911,6 +941,9 @@ CONFIG_HFSPLUS_FS=m # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set CONFIG_CRAMFS=m +CONFIG_SQUASHFS=m +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 # CONFIG_VXFS_FS is not set CONFIG_MINIX_FS=y # CONFIG_OMFS_FS is not set @@ -921,6 +954,7 @@ CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -936,7 +970,6 @@ CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -1011,11 +1044,6 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y - -# -# Tracers -# -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set # @@ -1036,13 +1064,21 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=m +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_WORKQUEUE=y CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_AUTHENC=m CONFIG_CRYPTO_TEST=m @@ -1112,6 +1148,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # Compression # CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # @@ -1119,11 +1156,13 @@ CONFIG_CRYPTO_LZO=m # # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m CONFIG_CRC16=m CONFIG_CRC_T10DIF=y @@ -1135,10 +1174,13 @@ CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m CONFIG_LZO_COMPRESS=m CONFIG_LZO_DECOMPRESS=m +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/m68k/configs/sun3_defconfig b/arch/m68k/configs/sun3_defconfig index f404917429f..f27c1a47bac 100644 --- a/arch/m68k/configs/sun3_defconfig +++ b/arch/m68k/configs/sun3_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc7 -# Tue Dec 2 20:27:53 2008 +# Linux kernel version: 2.6.30-rc3 +# Wed Apr 22 20:48:16 2009 # CONFIG_M68K=y CONFIG_MMU=y @@ -29,14 +29,24 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set CONFIG_RELAY=y CONFIG_NAMESPACES=y @@ -44,23 +54,27 @@ CONFIG_NAMESPACES=y # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -68,15 +82,16 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -84,11 +99,8 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set @@ -104,7 +116,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y # CONFIG_FREEZER is not set # @@ -138,12 +149,13 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y # # General setup @@ -253,6 +265,7 @@ CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HL=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m @@ -261,6 +274,7 @@ CONFIG_NETFILTER_XT_TARGET_RATEEST=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m @@ -271,6 +285,7 @@ CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_HL=m CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m @@ -349,25 +364,20 @@ CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_RAW=m CONFIG_IP_DCCP=m CONFIG_INET_DCCP_DIAG=m -CONFIG_IP_DCCP_ACKVEC=y # # DCCP CCIDs Configuration (EXPERIMENTAL) # -CONFIG_IP_DCCP_CCID2=m # CONFIG_IP_DCCP_CCID2_DEBUG is not set -CONFIG_IP_DCCP_CCID3=m -# CONFIG_IP_DCCP_CCID3_DEBUG is not set -CONFIG_IP_DCCP_CCID3_RTO=100 -CONFIG_IP_DCCP_TFRC_LIB=m +# CONFIG_IP_DCCP_CCID3 is not set CONFIG_IP_SCTP=m # CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set @@ -389,8 +399,10 @@ CONFIG_ATALK=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y +# CONFIG_DCB is not set # # Network testing @@ -401,8 +413,8 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -438,9 +450,13 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8 CONFIG_ATA_OVER_ETH=m # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -488,9 +504,12 @@ CONFIG_SCSI_SRP_ATTRS=m CONFIG_SCSI_SRP_TGT_ATTRS=y CONFIG_SCSI_LOWLEVEL=y CONFIG_ISCSI_TCP=m +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_SCSI_DEBUG is not set CONFIG_SUN3_SCSI=y # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m @@ -498,7 +517,7 @@ CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=m -CONFIG_MD_RAID5_RESHAPE=y +CONFIG_MD_RAID6_PQ=m # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m @@ -511,6 +530,7 @@ CONFIG_DM_MULTIPATH=m # CONFIG_DM_DELAY is not set CONFIG_DM_UEVENT=y CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m # CONFIG_BONDING is not set CONFIG_MACVLAN=m @@ -522,6 +542,8 @@ CONFIG_NET_ETHERNET=y # CONFIG_MII is not set CONFIG_SUN3LANCE=y CONFIG_SUN3_82586=y +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -537,7 +559,10 @@ CONFIG_SUN3_82586=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set CONFIG_PPP=m # CONFIG_PPP_MULTILINK is not set @@ -595,7 +620,6 @@ CONFIG_MOUSE_PS2=m CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set @@ -635,6 +659,7 @@ CONFIG_VT_HW_CONSOLE_BINDING=y # Non-8250 serial port support # CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set @@ -710,6 +735,7 @@ CONFIG_FB=y # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -741,16 +767,15 @@ CONFIG_HIDRAW=y # # Special HID drivers # -CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set -CONFIG_STAGING_EXCLUDE_BUILD=y # # Character devices @@ -763,6 +788,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT4_FS is not set CONFIG_JBD=y @@ -789,13 +815,15 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m # CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set -# CONFIG_OCFS2_COMPAT_JBD is not set +# CONFIG_OCFS2_FS_POSIX_ACL is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set +CONFIG_QUOTA_TREE=m # CONFIG_QFMT_V1 is not set # CONFIG_QFMT_V2 is not set CONFIG_QUOTACTL=y @@ -803,6 +831,11 @@ CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -834,10 +867,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_CONFIGFS_FS=m - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set CONFIG_AFFS_FS=m CONFIG_HFS_FS=m @@ -846,6 +876,9 @@ CONFIG_HFSPLUS_FS=m # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set CONFIG_CRAMFS=m +CONFIG_SQUASHFS=m +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 # CONFIG_VXFS_FS is not set CONFIG_MINIX_FS=y # CONFIG_OMFS_FS is not set @@ -856,6 +889,7 @@ CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -872,7 +906,6 @@ CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -948,11 +981,6 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y - -# -# Tracers -# -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set # @@ -973,13 +1001,21 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=m +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_WORKQUEUE=y CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_AUTHENC=m CONFIG_CRYPTO_TEST=m @@ -1049,6 +1085,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # Compression # CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # @@ -1056,11 +1093,13 @@ CONFIG_CRYPTO_LZO=m # # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m CONFIG_CRC16=m CONFIG_CRC_T10DIF=y @@ -1072,9 +1111,12 @@ CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m CONFIG_LZO_COMPRESS=m CONFIG_LZO_DECOMPRESS=m +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y +CONFIG_NLATTR=y diff --git a/arch/m68k/configs/sun3x_defconfig b/arch/m68k/configs/sun3x_defconfig index 4d8a1e84e39..c40edb919fd 100644 --- a/arch/m68k/configs/sun3x_defconfig +++ b/arch/m68k/configs/sun3x_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc7 -# Tue Dec 2 20:27:54 2008 +# Linux kernel version: 2.6.30-rc3 +# Wed Apr 22 20:48:20 2009 # CONFIG_M68K=y CONFIG_MMU=y @@ -29,14 +29,24 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set CONFIG_RELAY=y CONFIG_NAMESPACES=y @@ -44,23 +54,27 @@ CONFIG_NAMESPACES=y # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -68,15 +82,16 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -84,11 +99,8 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set @@ -104,7 +116,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y # CONFIG_FREEZER is not set # @@ -140,12 +151,13 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_NEED_MULTIPLE_NODES=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y # # General setup @@ -255,6 +267,7 @@ CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HL=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m @@ -263,6 +276,7 @@ CONFIG_NETFILTER_XT_TARGET_RATEEST=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m @@ -273,6 +287,7 @@ CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_HL=m CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m @@ -351,25 +366,20 @@ CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_RAW=m CONFIG_IP_DCCP=m CONFIG_INET_DCCP_DIAG=m -CONFIG_IP_DCCP_ACKVEC=y # # DCCP CCIDs Configuration (EXPERIMENTAL) # -CONFIG_IP_DCCP_CCID2=m # CONFIG_IP_DCCP_CCID2_DEBUG is not set -CONFIG_IP_DCCP_CCID3=m -# CONFIG_IP_DCCP_CCID3_DEBUG is not set -CONFIG_IP_DCCP_CCID3_RTO=100 -CONFIG_IP_DCCP_TFRC_LIB=m +# CONFIG_IP_DCCP_CCID3 is not set CONFIG_IP_SCTP=m # CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set @@ -391,8 +401,10 @@ CONFIG_ATALK=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y +# CONFIG_DCB is not set # # Network testing @@ -403,8 +415,8 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -440,9 +452,13 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8 CONFIG_ATA_OVER_ETH=m # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -490,9 +506,12 @@ CONFIG_SCSI_SRP_ATTRS=m CONFIG_SCSI_SRP_TGT_ATTRS=y CONFIG_SCSI_LOWLEVEL=y CONFIG_ISCSI_TCP=m +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_SCSI_DEBUG is not set CONFIG_SUN3X_ESP=y # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m @@ -500,7 +519,7 @@ CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=m -CONFIG_MD_RAID5_RESHAPE=y +CONFIG_MD_RAID6_PQ=m # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m @@ -513,6 +532,7 @@ CONFIG_DM_MULTIPATH=m # CONFIG_DM_DELAY is not set CONFIG_DM_UEVENT=y CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_DUMMY=m # CONFIG_BONDING is not set CONFIG_MACVLAN=m @@ -523,6 +543,8 @@ CONFIG_VETH=m CONFIG_NET_ETHERNET=y # CONFIG_MII is not set CONFIG_SUN3LANCE=y +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -539,7 +561,10 @@ CONFIG_SUN3LANCE=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set CONFIG_PPP=m # CONFIG_PPP_MULTILINK is not set @@ -597,7 +622,6 @@ CONFIG_MOUSE_PS2=m CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set @@ -637,6 +661,7 @@ CONFIG_VT_HW_CONSOLE_BINDING=y # Non-8250 serial port support # CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set @@ -718,6 +743,7 @@ CONFIG_FB=y # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -749,7 +775,6 @@ CONFIG_HIDRAW=y # # Special HID drivers # -CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -757,9 +782,9 @@ CONFIG_HID_COMPAT=y # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set -CONFIG_STAGING_EXCLUDE_BUILD=y # # Character devices @@ -772,6 +797,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT4_FS is not set CONFIG_JBD=y @@ -798,13 +824,15 @@ CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m # CONFIG_OCFS2_FS_STATS is not set # CONFIG_OCFS2_DEBUG_MASKLOG is not set # CONFIG_OCFS2_DEBUG_FS is not set -# CONFIG_OCFS2_COMPAT_JBD is not set +# CONFIG_OCFS2_FS_POSIX_ACL is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set +CONFIG_QUOTA_TREE=m # CONFIG_QFMT_V1 is not set # CONFIG_QFMT_V2 is not set CONFIG_QUOTACTL=y @@ -812,6 +840,11 @@ CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_FUSE_FS=m +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -843,10 +876,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_CONFIGFS_FS=m - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set CONFIG_AFFS_FS=m CONFIG_HFS_FS=m @@ -855,6 +885,9 @@ CONFIG_HFSPLUS_FS=m # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set CONFIG_CRAMFS=m +CONFIG_SQUASHFS=m +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 # CONFIG_VXFS_FS is not set CONFIG_MINIX_FS=y # CONFIG_OMFS_FS is not set @@ -865,6 +898,7 @@ CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -881,7 +915,6 @@ CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -957,11 +990,6 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y - -# -# Tracers -# -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set # @@ -982,13 +1010,21 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=m +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_WORKQUEUE=y CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_AUTHENC=m CONFIG_CRYPTO_TEST=m @@ -1058,6 +1094,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m # Compression # CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # @@ -1065,11 +1102,13 @@ CONFIG_CRYPTO_LZO=m # # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m CONFIG_CRC16=m CONFIG_CRC_T10DIF=y @@ -1081,10 +1120,13 @@ CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m CONFIG_LZO_COMPRESS=m CONFIG_LZO_DECOMPRESS=m +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y -- cgit v1.2.3 From ca8e34f2b05a8289b47907b083dc01dd654ecbde Mon Sep 17 00:00:00 2001 From: Tyler Hicks Date: Wed, 22 Apr 2009 16:27:12 -0500 Subject: eCryptfs: Lock lower directory inode mutex during lookup This patch locks the lower directory inode's i_mutex before calling lookup_one_len() to find the appropriate dentry in the lower filesystem. This bug was found thanks to the warning set in commit 2f9092e1. Signed-off-by: Tyler Hicks --- fs/ecryptfs/inode.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c index 5ed86e25b8a..d8325263ba6 100644 --- a/fs/ecryptfs/inode.c +++ b/fs/ecryptfs/inode.c @@ -379,9 +379,11 @@ static struct dentry *ecryptfs_lookup(struct inode *ecryptfs_dir_inode, goto out_d_drop; } lower_dir_dentry = ecryptfs_dentry_to_lower(ecryptfs_dentry->d_parent); + mutex_lock(&lower_dir_dentry->d_inode->i_mutex); lower_dentry = lookup_one_len(ecryptfs_dentry->d_name.name, lower_dir_dentry, ecryptfs_dentry->d_name.len); + mutex_unlock(&lower_dir_dentry->d_inode->i_mutex); if (IS_ERR(lower_dentry)) { rc = PTR_ERR(lower_dentry); printk(KERN_ERR "%s: lookup_one_len() returned [%d] on " @@ -406,9 +408,11 @@ static struct dentry *ecryptfs_lookup(struct inode *ecryptfs_dir_inode, "filename; rc = [%d]\n", __func__, rc); goto out_d_drop; } + mutex_lock(&lower_dir_dentry->d_inode->i_mutex); lower_dentry = lookup_one_len(encrypted_and_encoded_name, lower_dir_dentry, encrypted_and_encoded_name_size - 1); + mutex_unlock(&lower_dir_dentry->d_inode->i_mutex); if (IS_ERR(lower_dentry)) { rc = PTR_ERR(lower_dentry); printk(KERN_ERR "%s: lookup_one_len() returned [%d] on " -- cgit v1.2.3 From 3a6b42cadc112b01daf0525e5fcd90bb333a5bb3 Mon Sep 17 00:00:00 2001 From: Tyler Hicks Date: Thu, 16 Apr 2009 18:35:37 -0500 Subject: eCryptfs: Larger buffer for encrypted symlink targets When using filename encryption with eCryptfs, the value of the symlink in the lower filesystem is encrypted and stored as a Tag 70 packet. This results in a longer symlink target than if the target value wasn't encrypted. Users were reporting these messages in their syslog: [ 45.653441] ecryptfs_parse_tag_70_packet: max_packet_size is [56]; real packet size is [51] [ 45.653444] ecryptfs_decode_and_decrypt_filename: Could not parse tag 70 packet from filename; copying through filename as-is This was due to bufsiz, one the arguments in readlink(), being used to when allocating the buffer passed to the lower inode's readlink(). That symlink target may be very large, but when decoded and decrypted, could end up being smaller than bufsize. To fix this, the buffer passed to the lower inode's readlink() will always be PATH_MAX in size when filename encryption is enabled. Any necessary truncation occurs after the decoding and decrypting. Signed-off-by: Tyler Hicks --- fs/ecryptfs/inode.c | 24 ++++++++++++++++++------ 1 file changed, 18 insertions(+), 6 deletions(-) diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c index d8325263ba6..93bc0f8174a 100644 --- a/fs/ecryptfs/inode.c +++ b/fs/ecryptfs/inode.c @@ -640,8 +640,9 @@ static int ecryptfs_readlink(struct dentry *dentry, char __user *buf, int bufsiz) { char *lower_buf; + size_t lower_bufsiz; struct dentry *lower_dentry; - struct ecryptfs_crypt_stat *crypt_stat; + struct ecryptfs_mount_crypt_stat *mount_crypt_stat; char *plaintext_name; size_t plaintext_name_size; mm_segment_t old_fs; @@ -652,12 +653,21 @@ ecryptfs_readlink(struct dentry *dentry, char __user *buf, int bufsiz) rc = -EINVAL; goto out; } - crypt_stat = &ecryptfs_inode_to_private(dentry->d_inode)->crypt_stat; + mount_crypt_stat = &ecryptfs_superblock_to_private( + dentry->d_sb)->mount_crypt_stat; + /* + * If the lower filename is encrypted, it will result in a significantly + * longer name. If needed, truncate the name after decode and decrypt. + */ + if (mount_crypt_stat->flags & ECRYPTFS_GLOBAL_ENCRYPT_FILENAMES) + lower_bufsiz = PATH_MAX; + else + lower_bufsiz = bufsiz; /* Released in this function */ - lower_buf = kmalloc(bufsiz, GFP_KERNEL); + lower_buf = kmalloc(lower_bufsiz, GFP_KERNEL); if (lower_buf == NULL) { printk(KERN_ERR "%s: Out of memory whilst attempting to " - "kmalloc [%d] bytes\n", __func__, bufsiz); + "kmalloc [%d] bytes\n", __func__, lower_bufsiz); rc = -ENOMEM; goto out; } @@ -665,7 +675,7 @@ ecryptfs_readlink(struct dentry *dentry, char __user *buf, int bufsiz) set_fs(get_ds()); rc = lower_dentry->d_inode->i_op->readlink(lower_dentry, (char __user *)lower_buf, - bufsiz); + lower_bufsiz); set_fs(old_fs); if (rc >= 0) { rc = ecryptfs_decode_and_decrypt_filename(&plaintext_name, @@ -678,7 +688,9 @@ ecryptfs_readlink(struct dentry *dentry, char __user *buf, int bufsiz) rc); goto out_free_lower_buf; } - rc = copy_to_user(buf, plaintext_name, plaintext_name_size); + /* Check for bufsiz <= 0 done in sys_readlinkat() */ + rc = copy_to_user(buf, plaintext_name, + min((unsigned) bufsiz, plaintext_name_size)); if (rc) rc = -EFAULT; else -- cgit v1.2.3 From a71e4917dc0ebbcb5a0ecb7ca3486643c1c9a6e2 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Tue, 21 Apr 2009 00:50:11 -0400 Subject: ACPI: idle: mark_tsc_unstable() at init-time, not run-time The c2 and c3 idle handlers check tsc_halts_in_c() after every time they return from idle. Um, when?:-) Move this check to init-time to remove the unnecessary run-time overhead, and also to have the check complete before the first entry into the idle handler. ff69f2bba67bd45514923aaedbf40fe351787c59 (acpi: fix of pmtimer overflow that make Cx states time incorrect) replaced the hard-coded use of the PM-timer inside idle, with ktime_get_readl(), which possibly uses the TSC -- so it is now especially prudent to detect a broken TSC before entering idle. http://bugzilla.kernel.org/show_bug.cgi?id=13087 Signed-off-by: Len Brown --- drivers/acpi/processor_idle.c | 15 +++++---------- 1 file changed, 5 insertions(+), 10 deletions(-) diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index 6fe121434ff..9d1f01ee65d 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -581,6 +581,11 @@ static int acpi_processor_power_verify(struct acpi_processor *pr) for (i = 1; i < ACPI_PROCESSOR_MAX_POWER; i++) { struct acpi_processor_cx *cx = &pr->power.states[i]; +#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86) + /* TSC could halt in idle, so notify users */ + if (tsc_halts_in_c(cx->type)) + mark_tsc_unstable("TSC halts in idle");; +#endif switch (cx->type) { case ACPI_STATE_C1: cx->valid = 1; @@ -871,11 +876,6 @@ static int acpi_idle_enter_simple(struct cpuidle_device *dev, kt2 = ktime_get_real(); idle_time = ktime_to_us(ktime_sub(kt2, kt1)); -#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86) - /* TSC could halt in idle, so notify users */ - if (tsc_halts_in_c(cx->type)) - mark_tsc_unstable("TSC halts in idle");; -#endif sleep_ticks = us_to_pm_timer_ticks(idle_time); /* Tell the scheduler how much we idled: */ @@ -989,11 +989,6 @@ static int acpi_idle_enter_bm(struct cpuidle_device *dev, spin_unlock(&c3_lock); } -#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86) - /* TSC could halt in idle, so notify users */ - if (tsc_halts_in_c(ACPI_STATE_C3)) - mark_tsc_unstable("TSC halts in idle"); -#endif sleep_ticks = us_to_pm_timer_ticks(idle_time); /* Tell the scheduler how much we idled: */ sched_clock_idle_wakeup_event(sleep_ticks*PM_TIMER_TICK_NS); -- cgit v1.2.3 From 64f68416e794d59a42ddffdf1c5b7f026a4f23d5 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Thu, 23 Apr 2009 09:23:32 +1000 Subject: m68knommu: update the default config for the ColdFire 5407C3 board Signed-off-by: Greg Ungerer --- arch/m68knommu/configs/m5407c3_defconfig | 179 +++++++++++++++++-------------- 1 file changed, 98 insertions(+), 81 deletions(-) diff --git a/arch/m68knommu/configs/m5407c3_defconfig b/arch/m68knommu/configs/m5407c3_defconfig index 1118936d20e..97b6cde2fc1 100644 --- a/arch/m68knommu/configs/m5407c3_defconfig +++ b/arch/m68knommu/configs/m5407c3_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc1 -# Wed May 7 10:25:16 2008 +# Linux kernel version: 2.6.30-rc2 +# Thu Apr 23 09:21:40 2009 # CONFIG_M68K=y # CONFIG_MMU is not set @@ -16,9 +16,10 @@ CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_TIME_LOW_RES=y +# CONFIG_GENERIC_CLOCKEVENTS is not set CONFIG_NO_IOPORT=y -CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -34,10 +35,19 @@ CONFIG_LOCALVERSION_AUTO=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set @@ -45,44 +55,43 @@ CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y -# CONFIG_UID16 is not set -# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -# CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set # CONFIG_EPOLL is not set # CONFIG_SIGNALFD is not set # CONFIG_TIMERFD is not set # CONFIG_EVENTFD is not set +# CONFIG_AIO is not set # CONFIG_VM_EVENT_COUNTERS is not set -CONFIG_SLAB=y -# CONFIG_SLUB is not set +CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set -# CONFIG_HAVE_OPROFILE is not set -# CONFIG_HAVE_KPROBES is not set -# CONFIG_HAVE_KRETPROBES is not set -# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_SLOW_WORK is not set +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y -CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -96,7 +105,7 @@ CONFIG_IOSCHED_NOOP=y # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" -CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # Processor type and features @@ -149,45 +158,36 @@ CONFIG_RAMAUTOBIT=y # CONFIG_ROM is not set CONFIG_RAMKERNEL=y # CONFIG_ROMKERNEL is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_VIRT_TO_BUS=y +# CONFIG_UNEVICTABLE_LRU is not set CONFIG_ISA_DMA_API=y -# -# Bus options (PCI, PCMCIA, EISA, MCA, ISA) -# -# CONFIG_PCI is not set -# CONFIG_COMEMPCI is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set - # # Executable file formats # CONFIG_BINFMT_FLAT=y # CONFIG_BINFMT_ZFLAT is not set # CONFIG_BINFMT_SHARED_FLAT is not set -# CONFIG_BINFMT_AOUT is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # # Power management options # # CONFIG_PM is not set - -# -# Networking -# CONFIG_NET=y # @@ -228,6 +228,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -237,7 +238,9 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -248,14 +251,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -274,6 +271,7 @@ CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set # CONFIG_MTD_AR7_PARTS is not set @@ -334,6 +332,11 @@ CONFIG_MTD_UCLINUX=y # CONFIG_MTD_NAND is not set # CONFIG_MTD_ONENAND is not set +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + # # UBI - Unsorted block images # @@ -349,6 +352,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set # CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -362,7 +366,7 @@ CONFIG_HAVE_IDE=y # CONFIG_SCSI_NETLINK is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -372,10 +376,15 @@ CONFIG_NETDEVICES=y # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y # CONFIG_MII is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -385,8 +394,10 @@ CONFIG_NET_ETHERNET=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set CONFIG_PPP=y # CONFIG_PPP_MULTILINK is not set @@ -409,39 +420,22 @@ CONFIG_SLHC=y # # Input device support # -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set +# CONFIG_INPUT is not set # # Hardware I/O ports # -# CONFIG_SERIO is not set +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_LIBPS2 is not set +# CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set # # Character devices # # CONFIG_VT is not set -# CONFIG_DEVKMEM is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -454,7 +448,6 @@ CONFIG_INPUT=y # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_COLDFIRE is not set CONFIG_SERIAL_MCF=y CONFIG_SERIAL_MCF_BAUDRATE=19200 CONFIG_SERIAL_MCF_CONSOLE=y @@ -473,19 +466,23 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -496,6 +493,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set # # Multimedia drivers @@ -514,19 +512,17 @@ CONFIG_DAB=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set -# CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -534,12 +530,14 @@ CONFIG_DAB=y CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +# CONFIG_FILE_LOCKING is not set # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set # CONFIG_QUOTA is not set @@ -547,6 +545,11 @@ CONFIG_EXT2_FS=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -569,10 +572,7 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -582,13 +582,20 @@ CONFIG_SYSFS=y # CONFIG_EFS_FS is not set # CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set CONFIG_ROMFS_FS=y +# CONFIG_ROMFS_BACKED_BY_BLOCK is not set +CONFIG_ROMFS_BACKED_BY_MTD=y +# CONFIG_ROMFS_BACKED_BY_BOTH is not set +CONFIG_ROMFS_ON_MTD=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set # CONFIG_NETWORK_FILESYSTEMS is not set # @@ -611,11 +618,17 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_SAMPLES is not set # CONFIG_FULLDEBUG is not set # CONFIG_HIGHPROFILE is not set -# CONFIG_BOOTPARAM is not set +CONFIG_BOOTPARAM=y +CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0" # CONFIG_NO_KERNEL_MSG is not set # CONFIG_BDM_DISABLE is not set @@ -624,18 +637,22 @@ CONFIG_FRAME_WARN=1024 # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # -# CONFIG_GENERIC_FIND_FIRST_BIT is not set +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set # CONFIG_CRC32 is not set # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_HAS_IOMEM=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y -- cgit v1.2.3 From 92614610774072ea68131f16e024ee8fc15be9be Mon Sep 17 00:00:00 2001 From: Len Brown Date: Wed, 22 Apr 2009 19:28:15 -0400 Subject: ACPI: delete obsolete "bus master activity" proc field Linux-2.6.29 deleted the legacy ACPI idle handler, leaving the CPU_IDLE handler, which does not track bus master activity. So delete the unused bm_activity field -- it is confusing to print an always zero value. This patch could break programs that parse /proc/acpi/processor/*/power, since it deletes this line from that file: bus master activity: 00000000 http://bugzilla.kernel.org/show_bug.cgi?id=13145 is not fixed by this patch, but provoked this patch. Signed-off-by: Len Brown --- drivers/acpi/processor_idle.c | 4 +--- include/acpi/processor.h | 1 - 2 files changed, 1 insertion(+), 4 deletions(-) diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index 9d1f01ee65d..eed3b458eba 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -662,11 +662,9 @@ static int acpi_processor_power_seq_show(struct seq_file *seq, void *offset) seq_printf(seq, "active state: C%zd\n" "max_cstate: C%d\n" - "bus master activity: %08x\n" "maximum allowed latency: %d usec\n", pr->power.state ? pr->power.state - pr->power.states : 0, - max_cstate, (unsigned)pr->power.bm_activity, - pm_qos_requirement(PM_QOS_CPU_DMA_LATENCY)); + max_cstate, pm_qos_requirement(PM_QOS_CPU_DMA_LATENCY)); seq_puts(seq, "states:\n"); diff --git a/include/acpi/processor.h b/include/acpi/processor.h index b09c4fde972..4927c063347 100644 --- a/include/acpi/processor.h +++ b/include/acpi/processor.h @@ -84,7 +84,6 @@ struct acpi_processor_power { struct acpi_processor_cx *state; unsigned long bm_check_timestamp; u32 default_state; - u32 bm_activity; int count; struct acpi_processor_cx states[ACPI_PROCESSOR_MAX_POWER]; int timer_broadcast_on_state; -- cgit v1.2.3 From e84a26ce178345498a7eca0590852bcc36f1092f Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Wed, 22 Apr 2009 20:52:25 -0400 Subject: ext4: Make the extent validity check more paranoid Instead of just checking that the extent block number is greater or equal than s_first_data_block, make sure it it is not pointing into the block group descriptors, since that is clearly wrong. This helps prevent filesystem from getting very badly corrupted in case an extent block is corrupted. Signed-off-by: "Theodore Ts'o" --- fs/ext4/extents.c | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-) diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c index 6132353dcf6..c28ffe25950 100644 --- a/fs/ext4/extents.c +++ b/fs/ext4/extents.c @@ -326,11 +326,14 @@ ext4_ext_max_entries(struct inode *inode, int depth) static int ext4_valid_extent(struct inode *inode, struct ext4_extent *ext) { - ext4_fsblk_t block = ext_pblock(ext); + ext4_fsblk_t block = ext_pblock(ext), valid_block; int len = ext4_ext_get_actual_len(ext); struct ext4_super_block *es = EXT4_SB(inode->i_sb)->s_es; - if (unlikely(block < le32_to_cpu(es->s_first_data_block) || - ((block + len) > ext4_blocks_count(es)))) + + valid_block = le32_to_cpu(es->s_first_data_block) + + EXT4_SB(inode->i_sb)->s_gdb_count; + if (unlikely(block <= valid_block || + ((block + len) > ext4_blocks_count(es)))) return 0; else return 1; @@ -339,10 +342,13 @@ static int ext4_valid_extent(struct inode *inode, struct ext4_extent *ext) static int ext4_valid_extent_idx(struct inode *inode, struct ext4_extent_idx *ext_idx) { - ext4_fsblk_t block = idx_pblock(ext_idx); + ext4_fsblk_t block = idx_pblock(ext_idx), valid_block; struct ext4_super_block *es = EXT4_SB(inode->i_sb)->s_es; - if (unlikely(block < le32_to_cpu(es->s_first_data_block) || - (block >= ext4_blocks_count(es)))) + + valid_block = le32_to_cpu(es->s_first_data_block) + + EXT4_SB(inode->i_sb)->s_gdb_count; + if (unlikely(block <= valid_block || + (block >= ext4_blocks_count(es)))) return 0; else return 1; -- cgit v1.2.3 From b5451f7b2694b04d9f912f6cf09db1729f291996 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Wed, 22 Apr 2009 21:00:36 -0400 Subject: ext4: Fix potential inode allocation soft lockup in Orlov allocator If the Orlov allocator is having trouble finding an appropriate block group, the fallback code could loop forever, causing a soft lockup warning in find_group_orlov(): BUG: soft lockup - CPU#0 stuck for 61s! [cp:11728] ... Pid: 11728, comm: cp Not tainted (2.6.30-rc1-dirty #77) Lenovo EIP: 0060:[] EFLAGS: 00000246 CPU: 0 EIP is at ext4_get_group_desc+0x54/0x9d ... Call Trace: [] find_group_orlov+0x2ee/0x334 [] ? sched_clock+0x8/0xb [] ext4_new_inode+0x2cf/0xb1a Signed-off-by: "Theodore Ts'o" --- fs/ext4/ialloc.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/ext4/ialloc.c b/fs/ext4/ialloc.c index cbce5aa6b92..f18e0a08a6b 100644 --- a/fs/ext4/ialloc.c +++ b/fs/ext4/ialloc.c @@ -585,6 +585,7 @@ static int find_group_orlov(struct super_block *sb, struct inode *parent, fallback: ngroups = sbi->s_groups_count; avefreei = freei / ngroups; +fallback_retry: parent_group = EXT4_I(parent)->i_block_group; for (i = 0; i < ngroups; i++) { grp = (parent_group + i) % ngroups; @@ -602,7 +603,7 @@ fallback: * filesystems the above test can fail to find any blockgroups */ avefreei = 0; - goto fallback; + goto fallback_retry; } return -1; -- cgit v1.2.3 From 952043ac12a117d8e94bddd9088338d7ad20ca7d Mon Sep 17 00:00:00 2001 From: Steven Whitehouse Date: Thu, 23 Apr 2009 08:48:15 +0100 Subject: bitops: Add __ffs64 bitop Finds the first set bit in a 64 bit word. This is required in order to fix a bug in GFS2, but I think it should be a generic function in case of future users. Signed-off-by: Steven Whitehouse Reviewed-by: Christoph Lameter Reviewed-by: Willy Tarreau --- include/linux/bitops.h | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/include/linux/bitops.h b/include/linux/bitops.h index 61829139795..c05a29cb9bb 100644 --- a/include/linux/bitops.h +++ b/include/linux/bitops.h @@ -112,6 +112,25 @@ static inline unsigned fls_long(unsigned long l) return fls64(l); } +/** + * __ffs64 - find first set bit in a 64 bit word + * @word: The 64 bit word + * + * On 64 bit arches this is a synomyn for __ffs + * The result is not defined if no bits are set, so check that @word + * is non-zero before calling this. + */ +static inline unsigned long __ffs64(u64 word) +{ +#if BITS_PER_LONG == 32 + if (((u32)word) == 0UL) + return __ffs((u32)(word >> 32)) + 32; +#elif BITS_PER_LONG != 64 +#error BITS_PER_LONG not 32 or 64 +#endif + return __ffs((unsigned long)word); +} + #ifdef __KERNEL__ #ifdef CONFIG_GENERIC_FIND_FIRST_BIT -- cgit v1.2.3 From d8bd504ab800c8e9aadb983914a33e7166320bec Mon Sep 17 00:00:00 2001 From: Steven Whitehouse Date: Thu, 23 Apr 2009 08:54:02 +0100 Subject: GFS2: Fix bug in block allocation The new bitfit algorithm was counting from the wrong end of 64 bit words in the bitfield. This fixes it by using __ffs64 instead of fls64 Signed-off-by: Steven Whitehouse --- fs/gfs2/rgrp.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/fs/gfs2/rgrp.c b/fs/gfs2/rgrp.c index f03d024038e..c9786a46cdf 100644 --- a/fs/gfs2/rgrp.c +++ b/fs/gfs2/rgrp.c @@ -212,8 +212,7 @@ static u32 gfs2_bitfit(const u8 *buf, const unsigned int len, if (tmp == 0) return BFITNOENT; ptr--; - bit = fls64(tmp); - bit--; /* fls64 always adds one to the bit count */ + bit = __ffs64(tmp); bit /= 2; /* two bits per entry in the bitmap */ return (((const unsigned char *)ptr - buf) * GFS2_NBBY) + bit; } -- cgit v1.2.3 From d9ba7615bfd8bb06f79c853f9dfff9e93a837941 Mon Sep 17 00:00:00 2001 From: Steven Whitehouse Date: Thu, 23 Apr 2009 08:59:41 +0100 Subject: GFS2: Ensure that the inode goal block settings are updated GFS2 has a goal block associated with each inode indicating the search start position for future block allocations (in fact there are two, but thats for backward compatibility with GFS1 as they are set to identical locations in GFS2). In some circumstances, depending on the ordering of updates to the inode it was possible for the goal block settings to not be updated on disk. This patch ensures that the goal block will always get updated, thus reducing the potential for searching the same (already allocated) blocks again when looking for free space during block allocation. Signed-off-by: Steven Whitehouse --- fs/gfs2/rgrp.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/fs/gfs2/rgrp.c b/fs/gfs2/rgrp.c index c9786a46cdf..565038243fa 100644 --- a/fs/gfs2/rgrp.c +++ b/fs/gfs2/rgrp.c @@ -1444,10 +1444,12 @@ static struct gfs2_rgrpd *rgblk_free(struct gfs2_sbd *sdp, u64 bstart, u64 gfs2_alloc_block(struct gfs2_inode *ip, unsigned int *n) { struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode); + struct buffer_head *dibh; struct gfs2_alloc *al = ip->i_alloc; struct gfs2_rgrpd *rgd = al->al_rgd; u32 goal, blk; u64 block; + int error; if (rgrp_contains_block(rgd, ip->i_goal)) goal = ip->i_goal - rgd->rd_data0; @@ -1460,7 +1462,13 @@ u64 gfs2_alloc_block(struct gfs2_inode *ip, unsigned int *n) rgd->rd_last_alloc = blk; block = rgd->rd_data0 + blk; ip->i_goal = block; - + error = gfs2_meta_inode_buffer(ip, &dibh); + if (error == 0) { + struct gfs2_dinode *di = (struct gfs2_dinode *)dibh->b_data; + gfs2_trans_add_bh(ip->i_gl, dibh, 1); + di->di_goal_meta = di->di_goal_data = cpu_to_be64(ip->i_goal); + brelse(dibh); + } gfs2_assert_withdraw(sdp, rgd->rd_free >= *n); rgd->rd_free -= *n; -- cgit v1.2.3 From 3bd5f3ef290627efa3c219fa21a82eea90bc4cb0 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Thu, 23 Apr 2009 13:58:06 +0200 Subject: [S390] ipl: fix compile breakage Fix this for !CONFIG_SMP: arch/s390/kernel/ipl.c: In function 'stop_run': arch/s390/kernel/ipl.c:1461: error: implicit declaration of function 'signal_processor' Reported-by: Sachin Sant Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/ipl.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c index 6f3711a0eaa..b8bf4b14006 100644 --- a/arch/s390/kernel/ipl.c +++ b/arch/s390/kernel/ipl.c @@ -23,6 +23,7 @@ #include #include #include +#include #include #define IPL_PARM_BLOCK_VERSION 0 -- cgit v1.2.3 From b1ad171efa089ae26aba750d747d8149a4f860d5 Mon Sep 17 00:00:00 2001 From: Gerald Schaefer Date: Thu, 23 Apr 2009 13:58:07 +0200 Subject: [S390] appldata: avoid deadlock with appldata_mem The appldata_ops callbacks are called with a spin_lock held. But the appldata_mem callback then calls all_vm_events(), which calls get_online_cpus(), which might sleep. This possible deadlock is fixed by using a mutex instead of a spin_lock. Signed-off-by: Gerald Schaefer Signed-off-by: Martin Schwidefsky --- arch/s390/appldata/appldata_base.c | 32 ++++++++++++++++---------------- arch/s390/appldata/appldata_mem.c | 2 +- 2 files changed, 17 insertions(+), 17 deletions(-) diff --git a/arch/s390/appldata/appldata_base.c b/arch/s390/appldata/appldata_base.c index aeb3cff95f6..1dfc7100c7e 100644 --- a/arch/s390/appldata/appldata_base.c +++ b/arch/s390/appldata/appldata_base.c @@ -98,7 +98,7 @@ static DECLARE_WORK(appldata_work, appldata_work_fn); /* * Ops list */ -static DEFINE_SPINLOCK(appldata_ops_lock); +static DEFINE_MUTEX(appldata_ops_mutex); static LIST_HEAD(appldata_ops_list); @@ -129,14 +129,14 @@ static void appldata_work_fn(struct work_struct *work) i = 0; get_online_cpus(); - spin_lock(&appldata_ops_lock); + mutex_lock(&appldata_ops_mutex); list_for_each(lh, &appldata_ops_list) { ops = list_entry(lh, struct appldata_ops, list); if (ops->active == 1) { ops->callback(ops->data); } } - spin_unlock(&appldata_ops_lock); + mutex_unlock(&appldata_ops_mutex); put_online_cpus(); } @@ -338,7 +338,7 @@ appldata_generic_handler(ctl_table *ctl, int write, struct file *filp, struct list_head *lh; found = 0; - spin_lock(&appldata_ops_lock); + mutex_lock(&appldata_ops_mutex); list_for_each(lh, &appldata_ops_list) { tmp_ops = list_entry(lh, struct appldata_ops, list); if (&tmp_ops->ctl_table[2] == ctl) { @@ -346,15 +346,15 @@ appldata_generic_handler(ctl_table *ctl, int write, struct file *filp, } } if (!found) { - spin_unlock(&appldata_ops_lock); + mutex_unlock(&appldata_ops_mutex); return -ENODEV; } ops = ctl->data; if (!try_module_get(ops->owner)) { // protect this function - spin_unlock(&appldata_ops_lock); + mutex_unlock(&appldata_ops_mutex); return -ENODEV; } - spin_unlock(&appldata_ops_lock); + mutex_unlock(&appldata_ops_mutex); if (!*lenp || *ppos) { *lenp = 0; @@ -378,11 +378,11 @@ appldata_generic_handler(ctl_table *ctl, int write, struct file *filp, return -EFAULT; } - spin_lock(&appldata_ops_lock); + mutex_lock(&appldata_ops_mutex); if ((buf[0] == '1') && (ops->active == 0)) { // protect work queue callback if (!try_module_get(ops->owner)) { - spin_unlock(&appldata_ops_lock); + mutex_unlock(&appldata_ops_mutex); module_put(ops->owner); return -ENODEV; } @@ -407,7 +407,7 @@ appldata_generic_handler(ctl_table *ctl, int write, struct file *filp, "failed with rc=%d\n", ops->name, rc); module_put(ops->owner); } - spin_unlock(&appldata_ops_lock); + mutex_unlock(&appldata_ops_mutex); out: *lenp = len; *ppos += len; @@ -433,9 +433,9 @@ int appldata_register_ops(struct appldata_ops *ops) if (!ops->ctl_table) return -ENOMEM; - spin_lock(&appldata_ops_lock); + mutex_lock(&appldata_ops_mutex); list_add(&ops->list, &appldata_ops_list); - spin_unlock(&appldata_ops_lock); + mutex_unlock(&appldata_ops_mutex); ops->ctl_table[0].procname = appldata_proc_name; ops->ctl_table[0].maxlen = 0; @@ -452,9 +452,9 @@ int appldata_register_ops(struct appldata_ops *ops) goto out; return 0; out: - spin_lock(&appldata_ops_lock); + mutex_lock(&appldata_ops_mutex); list_del(&ops->list); - spin_unlock(&appldata_ops_lock); + mutex_unlock(&appldata_ops_mutex); kfree(ops->ctl_table); return -ENOMEM; } @@ -466,9 +466,9 @@ out: */ void appldata_unregister_ops(struct appldata_ops *ops) { - spin_lock(&appldata_ops_lock); + mutex_lock(&appldata_ops_mutex); list_del(&ops->list); - spin_unlock(&appldata_ops_lock); + mutex_unlock(&appldata_ops_mutex); unregister_sysctl_table(ops->sysctl_header); kfree(ops->ctl_table); } diff --git a/arch/s390/appldata/appldata_mem.c b/arch/s390/appldata/appldata_mem.c index 3ed56b7d1b2..4188cbe63a5 100644 --- a/arch/s390/appldata/appldata_mem.c +++ b/arch/s390/appldata/appldata_mem.c @@ -78,7 +78,7 @@ static void appldata_get_mem_data(void *data) { /* * don't put large structures on the stack, we are - * serialized through the appldata_ops_lock and can use static + * serialized through the appldata_ops_mutex and can use static */ static struct sysinfo val; unsigned long ev[NR_VM_EVENT_ITEMS]; -- cgit v1.2.3 From e1c805309d19c69d4ebeac38724076fa86feacdf Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Thu, 23 Apr 2009 13:58:08 +0200 Subject: [S390] /proc/stat idle field for idle cpus The cpu idle field in the output of /proc/stat is too small for cpus that have been idle for more than a tick. Add the architecture hook arch_idle_time that allows to add the not accounted idle time of a sleeping cpu without waking the cpu. The s390 implementation of arch_idle_time uses the already existing s390_idle_data per_cpu variable to find the sleep time of a neighboring idle cpu. Signed-off-by: Martin Schwidefsky --- arch/s390/include/asm/cputime.h | 4 ++++ arch/s390/kernel/vtime.c | 16 ++++++++++++++++ fs/proc/stat.c | 5 +++++ 3 files changed, 25 insertions(+) diff --git a/arch/s390/include/asm/cputime.h b/arch/s390/include/asm/cputime.h index 95b0f7db3c6..941384fbd39 100644 --- a/arch/s390/include/asm/cputime.h +++ b/arch/s390/include/asm/cputime.h @@ -174,4 +174,8 @@ cputime64_to_clock_t(cputime64_t cputime) return __div(cputime, 4096000000ULL / USER_HZ); } +cputime64_t s390_get_idle_time(int cpu); + +#define arch_idle_time(cpu) s390_get_idle_time(cpu) + #endif /* _S390_CPUTIME_H */ diff --git a/arch/s390/kernel/vtime.c b/arch/s390/kernel/vtime.c index 38ea92ff04f..c87f59bd824 100644 --- a/arch/s390/kernel/vtime.c +++ b/arch/s390/kernel/vtime.c @@ -240,6 +240,22 @@ void vtime_stop_cpu(void) } } +cputime64_t s390_get_idle_time(int cpu) +{ + struct s390_idle_data *idle; + unsigned long long now, idle_time, idle_enter; + + idle = &per_cpu(s390_idle, cpu); + spin_lock(&idle->lock); + now = get_clock(); + idle_time = 0; + idle_enter = idle->idle_enter; + if (idle_enter != 0ULL && idle_enter < now) + idle_time = now - idle_enter; + spin_unlock(&idle->lock); + return idle_time; +} + /* * Sorted add to a list. List is linear searched until first bigger * element is found. diff --git a/fs/proc/stat.c b/fs/proc/stat.c index f75efa22df5..81e4eb60972 100644 --- a/fs/proc/stat.c +++ b/fs/proc/stat.c @@ -18,6 +18,9 @@ #ifndef arch_irq_stat #define arch_irq_stat() 0 #endif +#ifndef arch_idle_time +#define arch_idle_time(cpu) 0 +#endif static int show_stat(struct seq_file *p, void *v) { @@ -40,6 +43,7 @@ static int show_stat(struct seq_file *p, void *v) nice = cputime64_add(nice, kstat_cpu(i).cpustat.nice); system = cputime64_add(system, kstat_cpu(i).cpustat.system); idle = cputime64_add(idle, kstat_cpu(i).cpustat.idle); + idle = cputime64_add(idle, arch_idle_time(i)); iowait = cputime64_add(iowait, kstat_cpu(i).cpustat.iowait); irq = cputime64_add(irq, kstat_cpu(i).cpustat.irq); softirq = cputime64_add(softirq, kstat_cpu(i).cpustat.softirq); @@ -69,6 +73,7 @@ static int show_stat(struct seq_file *p, void *v) nice = kstat_cpu(i).cpustat.nice; system = kstat_cpu(i).cpustat.system; idle = kstat_cpu(i).cpustat.idle; + idle = cputime64_add(idle, arch_idle_time(i)); iowait = kstat_cpu(i).cpustat.iowait; irq = kstat_cpu(i).cpustat.irq; softirq = kstat_cpu(i).cpustat.softirq; -- cgit v1.2.3 From 4d7a3cdfb4c9aa1e2ce61f3b16b24eb6acf6726d Mon Sep 17 00:00:00 2001 From: Frank Munzert Date: Thu, 23 Apr 2009 13:58:09 +0200 Subject: [S390] Use tape_generic_offline directly. tape_3590_offline and tape_34xx_offline are removed and tape_generic_offline is called directly instead. Signed-off-by: Frank Munzert Signed-off-by: Martin Schwidefsky --- drivers/s390/char/tape.h | 2 +- drivers/s390/char/tape_34xx.c | 8 +------- drivers/s390/char/tape_3590.c | 8 +------- drivers/s390/char/tape_core.c | 5 ++++- 4 files changed, 7 insertions(+), 16 deletions(-) diff --git a/drivers/s390/char/tape.h b/drivers/s390/char/tape.h index c07809c8016..5469e099597 100644 --- a/drivers/s390/char/tape.h +++ b/drivers/s390/char/tape.h @@ -285,7 +285,7 @@ extern int tape_mtop(struct tape_device *, int, int); extern void tape_state_set(struct tape_device *, enum tape_state); extern int tape_generic_online(struct tape_device *, struct tape_discipline *); -extern int tape_generic_offline(struct tape_device *device); +extern int tape_generic_offline(struct ccw_device *); /* Externals from tape_devmap.c */ extern int tape_generic_probe(struct ccw_device *); diff --git a/drivers/s390/char/tape_34xx.c b/drivers/s390/char/tape_34xx.c index 807ded5eb04..5f8e8ef43dd 100644 --- a/drivers/s390/char/tape_34xx.c +++ b/drivers/s390/char/tape_34xx.c @@ -1294,12 +1294,6 @@ tape_34xx_online(struct ccw_device *cdev) ); } -static int -tape_34xx_offline(struct ccw_device *cdev) -{ - return tape_generic_offline(cdev->dev.driver_data); -} - static struct ccw_driver tape_34xx_driver = { .name = "tape_34xx", .owner = THIS_MODULE, @@ -1307,7 +1301,7 @@ static struct ccw_driver tape_34xx_driver = { .probe = tape_generic_probe, .remove = tape_generic_remove, .set_online = tape_34xx_online, - .set_offline = tape_34xx_offline, + .set_offline = tape_generic_offline, }; static int diff --git a/drivers/s390/char/tape_3590.c b/drivers/s390/char/tape_3590.c index fc1d9129414..823b05bd0dd 100644 --- a/drivers/s390/char/tape_3590.c +++ b/drivers/s390/char/tape_3590.c @@ -1707,19 +1707,13 @@ tape_3590_online(struct ccw_device *cdev) &tape_discipline_3590); } -static int -tape_3590_offline(struct ccw_device *cdev) -{ - return tape_generic_offline(cdev->dev.driver_data); -} - static struct ccw_driver tape_3590_driver = { .name = "tape_3590", .owner = THIS_MODULE, .ids = tape_3590_ids, .probe = tape_generic_probe, .remove = tape_generic_remove, - .set_offline = tape_3590_offline, + .set_offline = tape_generic_offline, .set_online = tape_3590_online, }; diff --git a/drivers/s390/char/tape_core.c b/drivers/s390/char/tape_core.c index 08c09d3503c..8a109f3b69c 100644 --- a/drivers/s390/char/tape_core.c +++ b/drivers/s390/char/tape_core.c @@ -387,8 +387,11 @@ tape_cleanup_device(struct tape_device *device) * Manual offline is only allowed while the drive is not in use. */ int -tape_generic_offline(struct tape_device *device) +tape_generic_offline(struct ccw_device *cdev) { + struct tape_device *device; + + device = cdev->dev.driver_data; if (!device) { return -ENODEV; } -- cgit v1.2.3 From 75ee034addc9ac3f6a38a9e6b30e9b54be15d4e5 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Thu, 23 Apr 2009 13:58:10 +0200 Subject: [S390] omit frame pointers on s390 when possible Always omit frame pointers on s390. They aren't too useful for the kernel since we have already the kernel stack backchain which allows us to walk the kernel stack. So eleminate the extra code for frame pointers. Only allow the extra code for the function tracer since the gcc compile options -pg and -fomit-frame-pointer are incompatible. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- lib/Kconfig.debug | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index c6e854f215f..812c28207ba 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -440,7 +440,7 @@ config LOCKDEP bool depends on DEBUG_KERNEL && TRACE_IRQFLAGS_SUPPORT && STACKTRACE_SUPPORT && LOCKDEP_SUPPORT select STACKTRACE - select FRAME_POINTER if !X86 && !MIPS && !PPC && !ARM_UNWIND + select FRAME_POINTER if !X86 && !MIPS && !PPC && !ARM_UNWIND && !S390 select KALLSYMS select KALLSYMS_ALL @@ -620,7 +620,7 @@ config ARCH_WANT_FRAME_POINTERS config FRAME_POINTER bool "Compile the kernel with frame pointers" depends on DEBUG_KERNEL && \ - (CRIS || M68K || M68KNOMMU || FRV || UML || S390 || \ + (CRIS || M68K || M68KNOMMU || FRV || UML || \ AVR32 || SUPERH || BLACKFIN || MN10300) || \ ARCH_WANT_FRAME_POINTERS default y if (DEBUG_INFO && UML) || ARCH_WANT_FRAME_POINTERS @@ -809,13 +809,13 @@ config FAULT_INJECTION_STACKTRACE_FILTER depends on FAULT_INJECTION_DEBUG_FS && STACKTRACE_SUPPORT depends on !X86_64 select STACKTRACE - select FRAME_POINTER if !PPC + select FRAME_POINTER if !PPC && !S390 help Provide stacktrace filter for fault-injection capabilities config LATENCYTOP bool "Latency measuring infrastructure" - select FRAME_POINTER if !MIPS && !PPC + select FRAME_POINTER if !MIPS && !PPC && !S390 select KALLSYMS select KALLSYMS_ALL select STACKTRACE -- cgit v1.2.3 From e655dc8873b2390d92888095af6adad822a8b386 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Thu, 23 Apr 2009 13:58:11 +0200 Subject: [S390] update default configuration. Signed-off-by: Martin Schwidefsky --- arch/s390/defconfig | 63 ++++++++++++++++++++++++++++++++++++++++++----------- 1 file changed, 50 insertions(+), 13 deletions(-) diff --git a/arch/s390/defconfig b/arch/s390/defconfig index 31e809c7779..d401d56c255 100644 --- a/arch/s390/defconfig +++ b/arch/s390/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc4 -# Wed Feb 11 10:07:16 2009 +# Linux kernel version: 2.6.30-rc3 +# Thu Apr 23 09:29:52 2009 # CONFIG_SCHED_MC=y CONFIG_MMU=y @@ -22,6 +22,7 @@ CONFIG_NO_DMA=y CONFIG_GENERIC_LOCKBREAK=y CONFIG_PGSTE=y CONFIG_VIRT_CPU_ACCOUNTING=y +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_S390=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -37,6 +38,7 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set CONFIG_AUDIT=y @@ -77,21 +79,24 @@ CONFIG_IPC_NS=y # CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -# CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -99,10 +104,12 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_COMPAT_BRK is not set CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_KPROBES=y CONFIG_HAVE_SYSCALL_WRAPPERS=y @@ -111,6 +118,8 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_USE_GENERIC_SMP_HELPERS=y +CONFIG_HAVE_DEFAULT_NO_SPIN_MUTEXES=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -124,7 +133,6 @@ CONFIG_MODVERSIONS=y CONFIG_INIT_ALL_POSSIBLE=y CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y -# CONFIG_BLK_DEV_IO_TRACE is not set CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set CONFIG_BLOCK_COMPAT=y @@ -211,11 +219,12 @@ CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y # # I/O subsystem configuration # -CONFIG_MACHCHK_WARNING=y CONFIG_QDIO=y CONFIG_CHSC_SCH=m @@ -247,12 +256,12 @@ CONFIG_S390_HYPFS_FS=y CONFIG_KEXEC=y # CONFIG_ZFCPDUMP is not set CONFIG_S390_GUEST=y +CONFIG_SECCOMP=y CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -374,6 +383,7 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set CONFIG_NET_SCHED=y # @@ -438,7 +448,6 @@ CONFIG_CAN_BCM=m CONFIG_CAN_VCAN=m # CONFIG_CAN_DEBUG_DEVICES is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -537,6 +546,7 @@ CONFIG_SCSI_FC_ATTRS=y CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_SCSI_DEBUG is not set CONFIG_ZFCP=y CONFIG_SCSI_DH=m @@ -544,6 +554,10 @@ CONFIG_SCSI_DH_RDAC=m CONFIG_SCSI_DH_HP_SW=m CONFIG_SCSI_DH_EMC=m CONFIG_SCSI_DH_ALUA=m +CONFIG_SCSI_OSD_INITIATOR=m +CONFIG_SCSI_OSD_ULD=m +CONFIG_SCSI_OSD_DPRINT_SENSE=1 +# CONFIG_SCSI_OSD_DEBUG is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y CONFIG_MD_AUTODETECT=y @@ -564,6 +578,7 @@ CONFIG_DM_MULTIPATH=m # CONFIG_DM_DELAY is not set # CONFIG_DM_UEVENT is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_IFB is not set CONFIG_DUMMY=m CONFIG_BONDING=m @@ -667,6 +682,7 @@ CONFIG_S390_VMUR=m # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set CONFIG_ACCESSIBILITY=y +# CONFIG_AUXDISPLAY is not set # CONFIG_STAGING is not set # @@ -676,6 +692,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -700,6 +717,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set CONFIG_GENERIC_ACL=y +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -744,6 +766,8 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_EXOFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -758,7 +782,6 @@ CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -806,6 +829,7 @@ CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y +# CONFIG_DETECT_HUNG_TASK is not set # CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -830,7 +854,6 @@ CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_FRAME_POINTER is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_KPROBES_SANITY_TEST is not set @@ -840,7 +863,9 @@ CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -850,14 +875,17 @@ CONFIG_HAVE_FUNCTION_TRACER=y # CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set CONFIG_SAMPLES=y # CONFIG_SAMPLE_KOBJECT is not set # CONFIG_SAMPLE_KPROBES is not set -# CONFIG_DEBUG_PAGEALLOC is not set # # Security options @@ -882,10 +910,12 @@ CONFIG_CRYPTO_HASH=m CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG=m CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_GF128MUL=m # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_AUTHENC=m # CONFIG_CRYPTO_TEST is not set @@ -954,6 +984,7 @@ CONFIG_CRYPTO_SEED=m # Compression # # CONFIG_CRYPTO_DEFLATE is not set +CONFIG_CRYPTO_ZLIB=m CONFIG_CRYPTO_LZO=m # @@ -969,6 +1000,7 @@ CONFIG_CRYPTO_SHA512_S390=m # CONFIG_CRYPTO_DES_S390 is not set # CONFIG_CRYPTO_AES_S390 is not set CONFIG_S390_PRNG=m +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -982,9 +1014,14 @@ CONFIG_CRC_T10DIF=y CONFIG_CRC32=m CONFIG_CRC7=m CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=m CONFIG_LZO_COMPRESS=m CONFIG_LZO_DECOMPRESS=m -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_NLATTR=y CONFIG_HAVE_KVM=y CONFIG_VIRTUALIZATION=y CONFIG_KVM=m -- cgit v1.2.3 From f2ec24fd42d52a52829070b5e31d9a17d145df30 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Thu, 16 Apr 2009 10:36:54 +0200 Subject: microblaze: Remove unneded per cpu SYSCALL_SAVE variable Signed-off-by: Michal Simek --- arch/microblaze/include/asm/entry.h | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/microblaze/include/asm/entry.h b/arch/microblaze/include/asm/entry.h index 7f57e42ee46..1019d88b812 100644 --- a/arch/microblaze/include/asm/entry.h +++ b/arch/microblaze/include/asm/entry.h @@ -29,7 +29,6 @@ DECLARE_PER_CPU(unsigned int, KM); /* Kernel/user mode */ DECLARE_PER_CPU(unsigned int, ENTRY_SP); /* Saved SP on kernel entry */ DECLARE_PER_CPU(unsigned int, R11_SAVE); /* Temp variable for entry */ DECLARE_PER_CPU(unsigned int, CURRENT_SAVE); /* Saved current pointer */ -DECLARE_PER_CPU(unsigned int, SYSCALL_SAVE); /* Saved syscall number */ # endif /* __ASSEMBLY__ */ #endif /* _ASM_MICROBLAZE_ENTRY_H */ -- cgit v1.2.3 From 51eb6dc9ca40d086c102bb868ba7f29f33a30f6f Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Thu, 16 Apr 2009 10:41:45 +0200 Subject: microblaze: Remove while(1) loop from show_regs function I removed it because of show_regs can't break die function. If process/kernel failed, die (do_exit) function resolve it. Signed-off-by: Michal Simek --- arch/microblaze/kernel/process.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/microblaze/kernel/process.c b/arch/microblaze/kernel/process.c index 436f26ccbfa..bdc8b2c6c57 100644 --- a/arch/microblaze/kernel/process.c +++ b/arch/microblaze/kernel/process.c @@ -37,8 +37,6 @@ void show_regs(struct pt_regs *regs) regs->r29, regs->r30, regs->r31, regs->pc); printk(KERN_INFO " msr=%08lX, ear=%08lX, esr=%08lX, fsr=%08lX\n", regs->msr, regs->ear, regs->esr, regs->fsr); - while (1) - ; } void (*pm_idle)(void); -- cgit v1.2.3 From ceb8944b3a3dd3ec4094a476a44802cc32c4fc02 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Thu, 16 Apr 2009 10:46:37 +0200 Subject: microblaze: Remove uncache shadow condition Uncached shadow feature is not supported in current kernel code that's why I removed it. Signed-off-by: Michal Simek --- arch/microblaze/include/asm/cache.h | 5 ----- 1 file changed, 5 deletions(-) diff --git a/arch/microblaze/include/asm/cache.h b/arch/microblaze/include/asm/cache.h index c4c64b43c07..c209c47509d 100644 --- a/arch/microblaze/include/asm/cache.h +++ b/arch/microblaze/include/asm/cache.h @@ -37,9 +37,4 @@ void _invalidate_dcache(unsigned int addr); #define __disable_dcache() _disable_dcache() #define __invalidate_dcache(addr) _invalidate_dcache(addr) -/* FIXME - I don't think this is right */ -#ifdef CONFIG_XILINX_UNCACHED_SHADOW -#define UNCACHED_SHADOW_MASK (CONFIG_XILINX_ERAM_SIZE) -#endif - #endif /* _ASM_MICROBLAZE_CACHE_H */ -- cgit v1.2.3 From ac3efab50621bd6d01e5b40f3134dc7824788390 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Thu, 16 Apr 2009 10:58:47 +0200 Subject: microblaze: Rename kernel_mode to pt_mode in pt_regs Signed-off-by: Michal Simek --- arch/microblaze/include/asm/processor.h | 2 +- arch/microblaze/include/asm/ptrace.h | 4 ++-- arch/microblaze/kernel/asm-offsets.c | 2 +- arch/microblaze/kernel/process.c | 4 ++-- 4 files changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/microblaze/include/asm/processor.h b/arch/microblaze/include/asm/processor.h index d8e15434ba2..4bed76d0a6c 100644 --- a/arch/microblaze/include/asm/processor.h +++ b/arch/microblaze/include/asm/processor.h @@ -62,7 +62,7 @@ static inline void start_thread(struct pt_regs *regs, { regs->pc = pc; regs->r1 = usp; - regs->kernel_mode = 0; + regs->pt_mode = 0; } /* Free all resources held by a thread. */ diff --git a/arch/microblaze/include/asm/ptrace.h b/arch/microblaze/include/asm/ptrace.h index f1f03486428..55015bce5e4 100644 --- a/arch/microblaze/include/asm/ptrace.h +++ b/arch/microblaze/include/asm/ptrace.h @@ -52,10 +52,10 @@ struct pt_regs { microblaze_reg_t ear; microblaze_reg_t esr; microblaze_reg_t fsr; - int kernel_mode; + int pt_mode; }; -#define kernel_mode(regs) ((regs)->kernel_mode) +#define kernel_mode(regs) ((regs)->pt_mode) #define user_mode(regs) (!kernel_mode(regs)) #define instruction_pointer(regs) ((regs)->pc) diff --git a/arch/microblaze/kernel/asm-offsets.c b/arch/microblaze/kernel/asm-offsets.c index 38e1a2e8ad0..aabd9e9423a 100644 --- a/arch/microblaze/kernel/asm-offsets.c +++ b/arch/microblaze/kernel/asm-offsets.c @@ -57,7 +57,7 @@ int main(int argc, char *argv[]) DEFINE(PT_R29, offsetof(struct pt_regs, r29)); DEFINE(PT_R30, offsetof(struct pt_regs, r30)); DEFINE(PT_R31, offsetof(struct pt_regs, r31)); - DEFINE(PT_MODE, offsetof(struct pt_regs, kernel_mode)); + DEFINE(PT_MODE, offsetof(struct pt_regs, pt_mode)); BLANK(); /* Magic offsets for PTRACE PEEK/POKE etc */ diff --git a/arch/microblaze/kernel/process.c b/arch/microblaze/kernel/process.c index bdc8b2c6c57..40cc1480810 100644 --- a/arch/microblaze/kernel/process.c +++ b/arch/microblaze/kernel/process.c @@ -18,7 +18,7 @@ void show_regs(struct pt_regs *regs) { - printk(KERN_INFO " Registers dump: mode=%X\r\n", regs->kernel_mode); + printk(KERN_INFO " Registers dump: mode=%X\r\n", regs->pt_mode); printk(KERN_INFO " r1=%08lX, r2=%08lX, r3=%08lX, r4=%08lX\n", regs->r1, regs->r2, regs->r3, regs->r4); printk(KERN_INFO " r5=%08lX, r6=%08lX, r7=%08lX, r8=%08lX\n", @@ -169,7 +169,7 @@ int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags) regs.r6 = (unsigned long)arg; local_save_flags(regs.msr); regs.pc = (unsigned long)kernel_thread_helper; - regs.kernel_mode = 1; + regs.pt_mode = 1; ret = do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0, ®s, 0, NULL, NULL); -- cgit v1.2.3 From 2eba318e0db1114726e69660d6b9e1bd59b10ba1 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Thu, 16 Apr 2009 11:05:26 +0200 Subject: microblaze: Move task_pt_regs up This change is important for easier merge with Microblaze MMU code. Signed-off-by: Michal Simek --- arch/microblaze/include/asm/processor.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/microblaze/include/asm/processor.h b/arch/microblaze/include/asm/processor.h index 4bed76d0a6c..cea42a36d16 100644 --- a/arch/microblaze/include/asm/processor.h +++ b/arch/microblaze/include/asm/processor.h @@ -26,6 +26,9 @@ extern const struct seq_operations cpuinfo_op; # endif /* __ASSEMBLY__ */ +#define task_pt_regs(tsk) \ + (((struct pt_regs *)(THREAD_SIZE + task_stack_page(tsk))) - 1) + /* * User space process size: memory size * @@ -84,9 +87,6 @@ extern unsigned long get_wchan(struct task_struct *p); */ extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags); -# define task_pt_regs(tsk) \ - (((struct pt_regs *)(THREAD_SIZE + task_stack_page(tsk))) - 1) - # define KSTK_EIP(tsk) (0) # define KSTK_ESP(tsk) (0) -- cgit v1.2.3 From bf7e9da4e70a9d4bf9dc5829ff854398e0e4b7f7 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Thu, 16 Apr 2009 11:10:07 +0200 Subject: microblaze: Remove sparse error in traps.c CHECK arch/microblaze/kernel/traps.c arch/microblaze/kernel/traps.c:37:47: warning: Using plain integer as NULL pointer CC arch/microblaze/kernel/traps.o Signed-off-by: Michal Simek --- arch/microblaze/kernel/traps.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/microblaze/kernel/traps.c b/arch/microblaze/kernel/traps.c index fbdc533c61e..293ef486013 100644 --- a/arch/microblaze/kernel/traps.c +++ b/arch/microblaze/kernel/traps.c @@ -34,7 +34,7 @@ static int kstack_depth_to_print = 24; static int __init kstack_setup(char *s) { - kstack_depth_to_print = strict_strtoul(s, 0, 0); + kstack_depth_to_print = strict_strtoul(s, 0, NULL); return 1; } -- cgit v1.2.3 From ce0b755f7dda4f1c06b89f7e903667f538dadd3c Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Thu, 16 Apr 2009 11:11:22 +0200 Subject: microblaze: Add missing declaration for die and _exception func This change remove sparse errors. Signed-off-by: Michal Simek --- arch/microblaze/include/asm/exceptions.h | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/microblaze/include/asm/exceptions.h b/arch/microblaze/include/asm/exceptions.h index 4cdd2159f47..24ca540e77c 100644 --- a/arch/microblaze/include/asm/exceptions.h +++ b/arch/microblaze/include/asm/exceptions.h @@ -61,6 +61,9 @@ asmlinkage void full_exception(struct pt_regs *regs, unsigned int type, int fsr, int addr); +void die(const char *str, struct pt_regs *fp, long err); +void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr); + #if defined(CONFIG_XMON) extern void xmon(struct pt_regs *regs); extern int xmon_bpt(struct pt_regs *regs); -- cgit v1.2.3 From df4f3eb7c318e34899e9499bc5c9295690f7a106 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Thu, 16 Apr 2009 11:29:13 +0200 Subject: microblaze: Add missing preadv and pwritev syscalls Signed-off-by: Michal Simek --- arch/microblaze/include/asm/unistd.h | 4 +++- arch/microblaze/kernel/syscall_table.S | 2 ++ 2 files changed, 5 insertions(+), 1 deletion(-) diff --git a/arch/microblaze/include/asm/unistd.h b/arch/microblaze/include/asm/unistd.h index d9d3903fde3..b5e2f5fa5c5 100644 --- a/arch/microblaze/include/asm/unistd.h +++ b/arch/microblaze/include/asm/unistd.h @@ -378,8 +378,10 @@ #define __NR_sendmsg 360 /* new */ #define __NR_recvmsg 361 /* new */ #define __NR_accept04 362 /* new */ +#define __NR_preadv 363 /* new */ +#define __NR_pwritev 364 /* new */ -#define __NR_syscalls 363 +#define __NR_syscalls 365 #ifdef __KERNEL__ #ifndef __ASSEMBLY__ diff --git a/arch/microblaze/kernel/syscall_table.S b/arch/microblaze/kernel/syscall_table.S index 529b0dbf4fe..3bb42ec924c 100644 --- a/arch/microblaze/kernel/syscall_table.S +++ b/arch/microblaze/kernel/syscall_table.S @@ -363,3 +363,5 @@ ENTRY(sys_call_table) .long sys_sendmsg /* 360 */ .long sys_recvmsg .long sys_ni_syscall + .long sys_ni_syscall + .long sys_ni_syscall -- cgit v1.2.3 From e1c4bd0897b6d03eff4b32197d6ab017f83fc836 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Thu, 16 Apr 2009 11:30:16 +0200 Subject: microblaze: Move start_thread to process.c This change is due to upcomming MMU merge Signed-off-by: Michal Simek --- arch/microblaze/include/asm/processor.h | 13 +++---------- arch/microblaze/kernel/process.c | 9 +++++++++ 2 files changed, 12 insertions(+), 10 deletions(-) diff --git a/arch/microblaze/include/asm/processor.h b/arch/microblaze/include/asm/processor.h index cea42a36d16..89aa3956929 100644 --- a/arch/microblaze/include/asm/processor.h +++ b/arch/microblaze/include/asm/processor.h @@ -29,6 +29,9 @@ extern const struct seq_operations cpuinfo_op; #define task_pt_regs(tsk) \ (((struct pt_regs *)(THREAD_SIZE + task_stack_page(tsk))) - 1) +/* Do necessary setup to start up a newly executed thread. */ +void start_thread(struct pt_regs *regs, unsigned long pc, unsigned long usp); + /* * User space process size: memory size * @@ -58,16 +61,6 @@ struct task_struct; struct thread_struct { }; # define INIT_THREAD { } -/* Do necessary setup to start up a newly executed thread. */ -static inline void start_thread(struct pt_regs *regs, - unsigned long pc, - unsigned long usp) -{ - regs->pc = pc; - regs->r1 = usp; - regs->pt_mode = 0; -} - /* Free all resources held by a thread. */ static inline void release_thread(struct task_struct *dead_task) { diff --git a/arch/microblaze/kernel/process.c b/arch/microblaze/kernel/process.c index 40cc1480810..dd15de9cde3 100644 --- a/arch/microblaze/kernel/process.c +++ b/arch/microblaze/kernel/process.c @@ -182,3 +182,12 @@ unsigned long get_wchan(struct task_struct *p) /* TBD (used by procfs) */ return 0; } + +/* Set up a thread for executing a new program */ +void start_thread(struct pt_regs *regs, unsigned long pc, unsigned long usp) +{ + set_fs(USER_DS); + regs->pc = pc; + regs->r1 = usp; + regs->pt_mode = 0; +} -- cgit v1.2.3 From 6714fcc34e1bcf247fe542ebdea36b699ff8e2b8 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Thu, 16 Apr 2009 11:32:21 +0200 Subject: microblaze: Remove redundant variable Signed-off-by: Michal Simek --- arch/microblaze/kernel/process.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/arch/microblaze/kernel/process.c b/arch/microblaze/kernel/process.c index dd15de9cde3..07d4fa339ed 100644 --- a/arch/microblaze/kernel/process.c +++ b/arch/microblaze/kernel/process.c @@ -161,7 +161,6 @@ static void kernel_thread_helper(int (*fn)(void *), void *arg) int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags) { struct pt_regs regs; - int ret; memset(®s, 0, sizeof(regs)); /* store them in non-volatile registers */ @@ -171,10 +170,8 @@ int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags) regs.pc = (unsigned long)kernel_thread_helper; regs.pt_mode = 1; - ret = do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0, + return do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0, ®s, 0, NULL, NULL); - - return ret; } unsigned long get_wchan(struct task_struct *p) -- cgit v1.2.3 From 04e3a553e0cbed369e5649c472ac317b6c45215d Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Mon, 20 Apr 2009 09:56:24 +0200 Subject: microblaze: Correspond CONFIG...PCMP in Makefile/Kconfig Makefile contained different cpu config flag than is in Kconfig.auto in platform folder Signed-off-by: Michal Simek --- arch/microblaze/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/microblaze/Makefile b/arch/microblaze/Makefile index 0dcbb983297..ee302f9f588 100644 --- a/arch/microblaze/Makefile +++ b/arch/microblaze/Makefile @@ -26,7 +26,7 @@ ifeq (,$(findstring spartan2,$(CONFIG_XILINX_MICROBLAZE0_FAMILY))) endif CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_DIV) += -mno-xl-soft-div CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_BARREL) += -mxl-barrel-shift -CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_PCMP) += -mxl-pattern-compare +CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR) += -mxl-pattern-compare CPUFLAGS-1 += $(call cc-option,-mcpu=v$(CPU_VER)) -- cgit v1.2.3 From 6e60c14810d8da792e418fdcb2110b4185d1b9a2 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Thu, 16 Apr 2009 22:49:17 +0200 Subject: microblaze: iowrite upon timeout retries reaches -1, so the iowrite occurrs upon timeout. Acked-by: John Williams Signed-off-by: Roel Kluin Signed-off-by: Michal Simek --- arch/microblaze/kernel/early_printk.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/microblaze/kernel/early_printk.c b/arch/microblaze/kernel/early_printk.c index 62cc78993f4..4b0f0fdb9ca 100644 --- a/arch/microblaze/kernel/early_printk.c +++ b/arch/microblaze/kernel/early_printk.c @@ -36,7 +36,7 @@ static void early_printk_putc(char c) unsigned retries = 10000; /* read status bit - 0x8 offset */ - while (retries-- && (in_be32(base_addr + 8) & (1 << 3))) + while (--retries && (in_be32(base_addr + 8) & (1 << 3))) ; /* Only attempt the iowrite if we didn't timeout */ -- cgit v1.2.3 From 79533fd4cb7c261694d3b7d5bdde78836bc35b49 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Tue, 21 Apr 2009 14:04:39 +0200 Subject: microblaze: Fix USR1/2 pvr printing message Signed-off-by: Michal Simek --- arch/microblaze/kernel/cpu/mb.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/microblaze/kernel/cpu/mb.c b/arch/microblaze/kernel/cpu/mb.c index 3b6212bdc8d..4dcfccdbc36 100644 --- a/arch/microblaze/kernel/cpu/mb.c +++ b/arch/microblaze/kernel/cpu/mb.c @@ -115,8 +115,8 @@ static int show_cpuinfo(struct seq_file *m, void *v) cpuinfo.hw_debug ? "yes" : "no"); count += seq_printf(m, - "PVR-USR1:\t%x\n" - "PVR-USR2:\t%x\n", + "PVR-USR1:\t%02x\n" + "PVR-USR2:\t%08x\n", cpuinfo.pvr_user1, cpuinfo.pvr_user2); -- cgit v1.2.3 From fbeda67782689bf80109512b16ac47264a282d01 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Tue, 21 Apr 2009 14:06:08 +0200 Subject: microblaze: Do not use PVR configuration for broken MB version Signed-off-by: Michal Simek --- arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c | 9 +++++++-- arch/microblaze/kernel/cpu/cpuinfo.c | 2 +- 2 files changed, 8 insertions(+), 3 deletions(-) diff --git a/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c b/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c index cf7424a6bb8..153f57c57b6 100644 --- a/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c +++ b/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c @@ -30,6 +30,13 @@ void set_cpuinfo_pvr_full(struct cpuinfo *ci, struct device_node *cpu) int temp; /* for saving temp value */ get_pvr(&pvr); + CI(ver_code, VERSION); + if (!ci->ver_code) { + printk(KERN_ERR "ERROR: MB has broken PVR regs " + "-> use DTS setting\n"); + return; + } + temp = PVR_USE_BARREL(pvr) | PVR_USE_MSR_INSTR(pvr) |\ PVR_USE_PCMP_INSTR(pvr) | PVR_USE_DIV(pvr); if (ci->use_instr != temp) @@ -60,8 +67,6 @@ void set_cpuinfo_pvr_full(struct cpuinfo *ci, struct device_node *cpu) CI(mmu, USE_MMU); - CI(ver_code, VERSION); - CI(use_icache, USE_ICACHE); CI(icache_tagbits, ICACHE_ADDR_TAG_BITS); CI(icache_write, ICACHE_ALLOW_WR); diff --git a/arch/microblaze/kernel/cpu/cpuinfo.c b/arch/microblaze/kernel/cpu/cpuinfo.c index 4a740dfcf6d..a10bea119b9 100644 --- a/arch/microblaze/kernel/cpu/cpuinfo.c +++ b/arch/microblaze/kernel/cpu/cpuinfo.c @@ -71,7 +71,7 @@ void __init setup_cpuinfo(void) __func__); set_cpuinfo_static(&cpuinfo, cpu); break; -/* FIXME I found weird behavior with MB 7.00.a/b +/* FIXME I found weird behavior with MB 7.00.a/b 7.10.a * please do not use FULL PVR with MMU */ case 1: printk(KERN_INFO "%s: Using full CPU PVR support\n", -- cgit v1.2.3 From 6dfb79aa114ac69032f3931235ffc90799e9630b Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Tue, 21 Apr 2009 14:07:00 +0200 Subject: microblaze: Do not check use_dcache It is not necessary to check cpuinfo.use_dcache because this checking is done in function which call that functions Signed-off-by: Michal Simek --- arch/microblaze/kernel/cpu/cache.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/arch/microblaze/kernel/cpu/cache.c b/arch/microblaze/kernel/cpu/cache.c index be9fecca4f9..af866a45012 100644 --- a/arch/microblaze/kernel/cpu/cache.c +++ b/arch/microblaze/kernel/cpu/cache.c @@ -100,7 +100,6 @@ void _enable_dcache(void) void _disable_dcache(void) { - if (cpuinfo.use_dcache) { #if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR __asm__ __volatile__ (" \ msrclr r0, %0; \ @@ -119,12 +118,10 @@ void _disable_dcache(void) : "i" (MSR_DCE) \ : "memory", "r12"); #endif - } } void _invalidate_dcache(unsigned int addr) { - if (cpuinfo.use_dcache) __asm__ __volatile__ (" \ wdc %0, r0" \ : \ -- cgit v1.2.3 From 2921e2bd679949a7892d308b414e6a3b3c705260 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Tue, 21 Apr 2009 14:08:47 +0200 Subject: microblaze: Add STATE_SAVE_ARG_SPACE for noMMU kernel too For noMMU kernel this change nothing bring but this change helps with MMU synchronization. Signed-off-by: Michal Simek --- arch/microblaze/include/asm/entry.h | 3 +++ arch/microblaze/include/asm/processor.h | 2 ++ arch/microblaze/kernel/signal.c | 14 ++++++++++---- 3 files changed, 15 insertions(+), 4 deletions(-) diff --git a/arch/microblaze/include/asm/entry.h b/arch/microblaze/include/asm/entry.h index 1019d88b812..e4c3aef884d 100644 --- a/arch/microblaze/include/asm/entry.h +++ b/arch/microblaze/include/asm/entry.h @@ -31,4 +31,7 @@ DECLARE_PER_CPU(unsigned int, R11_SAVE); /* Temp variable for entry */ DECLARE_PER_CPU(unsigned int, CURRENT_SAVE); /* Saved current pointer */ # endif /* __ASSEMBLY__ */ +/* noMMU hasn't any space for args */ +# define STATE_SAVE_ARG_SPACE (0) + #endif /* _ASM_MICROBLAZE_ENTRY_H */ diff --git a/arch/microblaze/include/asm/processor.h b/arch/microblaze/include/asm/processor.h index 89aa3956929..9329029d261 100644 --- a/arch/microblaze/include/asm/processor.h +++ b/arch/microblaze/include/asm/processor.h @@ -15,6 +15,8 @@ #include #include #include +#include +#include # ifndef __ASSEMBLY__ /* from kernel/cpu/mb.c */ diff --git a/arch/microblaze/kernel/signal.c b/arch/microblaze/kernel/signal.c index 3889cf45fa7..40d36931e36 100644 --- a/arch/microblaze/kernel/signal.c +++ b/arch/microblaze/kernel/signal.c @@ -178,7 +178,9 @@ restore_sigcontext(struct pt_regs *regs, struct sigcontext *sc, int *rval_p) asmlinkage int sys_sigreturn(struct pt_regs *regs) { - struct sigframe *frame = (struct sigframe *)regs->r1; + struct sigframe *frame = + (struct sigframe *)(regs->r1 + STATE_SAVE_ARG_SPACE); + sigset_t set; int rval; @@ -209,7 +211,9 @@ badframe: asmlinkage int sys_rt_sigreturn(struct pt_regs *regs) { - struct rt_sigframe *frame = (struct rt_sigframe *)regs->r1; + struct rt_sigframe *frame = + (struct rt_sigframe *)(regs->r1 + STATE_SAVE_ARG_SPACE); + sigset_t set; stack_t st; int rval; @@ -336,7 +340,8 @@ static void setup_frame(int sig, struct k_sigaction *ka, goto give_sigsegv; /* Set up registers for signal handler */ - regs->r1 = (unsigned long) frame; + regs->r1 = (unsigned long) frame - STATE_SAVE_ARG_SPACE; + /* Signal handler args: */ regs->r5 = signal; /* Arg 0: signum */ regs->r6 = (unsigned long) &frame->sc; /* arg 1: sigcontext */ @@ -414,7 +419,8 @@ static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, goto give_sigsegv; /* Set up registers for signal handler */ - regs->r1 = (unsigned long) frame; + regs->r1 = (unsigned long) frame - STATE_SAVE_ARG_SPACE; + /* Signal handler args: */ regs->r5 = signal; /* arg 0: signum */ regs->r6 = (unsigned long) &frame->info; /* arg 1: siginfo */ -- cgit v1.2.3 From 993ce24078eac1442078741cd204584b63de0881 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Tue, 21 Apr 2009 14:12:18 +0200 Subject: microblaze: Use CFLAGS_KERNEL instead of CFLAGS Signed-off-by: Michal Simek --- arch/microblaze/Makefile | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/arch/microblaze/Makefile b/arch/microblaze/Makefile index ee302f9f588..aaadfa701da 100644 --- a/arch/microblaze/Makefile +++ b/arch/microblaze/Makefile @@ -32,15 +32,13 @@ CPUFLAGS-1 += $(call cc-option,-mcpu=v$(CPU_VER)) # The various CONFIG_XILINX cpu features options are integers 0/1/2... # rather than bools y/n -CFLAGS += $(CPUFLAGS-1) -CFLAGS += $(CPUFLAGS-2) # r31 holds current when in kernel mode -CFLAGS += -ffixed-r31 +CFLAGS_KERNEL += -ffixed-r31 $(CPUFLAGS-1) $(CPUFLAGS-2) LDFLAGS_BLOB := --format binary --oformat elf32-microblaze -LIBGCC := $(shell $(CC) $(CFLAGS) -print-libgcc-file-name) +LIBGCC := $(shell $(CC) $(CFLAGS_KERNEL) -print-libgcc-file-name) head-y := arch/microblaze/kernel/head.o libs-y += arch/microblaze/lib/ $(LIBGCC) -- cgit v1.2.3 From f57f2fe2a39338c47b67fbd564a9d3b7587bcbee Mon Sep 17 00:00:00 2001 From: Coly Li Date: Thu, 23 Apr 2009 03:05:31 +0800 Subject: microblaze: add parameter to microblaze_read() This patch modifies parameter of microblaze_read() from 'void' to 'struct clocksource *cs', which fixes compile warning for incompatible parameter type. Signed-off-by: Coly Li Cc: Michal Simek Cc: Ingo Molnar Signed-off-by: Michal Simek --- arch/microblaze/kernel/timer.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/microblaze/kernel/timer.c b/arch/microblaze/kernel/timer.c index 05a497eefd7..bdfa2f9f0c8 100644 --- a/arch/microblaze/kernel/timer.c +++ b/arch/microblaze/kernel/timer.c @@ -176,7 +176,7 @@ static __init void microblaze_clockevent_init(void) clockevents_register_device(&clockevent_microblaze_timer); } -static cycle_t microblaze_read(void) +static cycle_t microblaze_read(struct clocksource *cs) { /* reading actual value of timer 1 */ return (cycle_t) (in_be32(TIMER_BASE + TCR1)); -- cgit v1.2.3 From 33e86019f77b6358bfe06767e08154be032d8751 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Thu, 23 Apr 2009 22:53:43 +0200 Subject: palm_bk3710: those registers/bitfields don't exist Bugfixes noted by checking the code against the controller documentation (TI document number SPRUE21): - Remove declarations for eight non-existent registers (!); and remove accesses to two of them. - Remove access to various non-existent bitfields in some of the registers which *do* exist (those fields must-be-zero). - Provide comment to replace bogus reset logic (removed above, it relied on non-existent bitfields). Resets require GPIO help; this driver doesn't currently know about that. With some minor cleanup: relocate a comment, avoid an extra lookup of the PIO timings. Signed-off-by: David Brownell Cc: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/palm_bk3710.c | 67 +++++++++++++---------------------------------- 1 file changed, 18 insertions(+), 49 deletions(-) diff --git a/drivers/ide/palm_bk3710.c b/drivers/ide/palm_bk3710.c index d1513b4a457..13a5449aabf 100644 --- a/drivers/ide/palm_bk3710.c +++ b/drivers/ide/palm_bk3710.c @@ -42,16 +42,9 @@ #define BK3710_BMICP 0x00 #define BK3710_BMISP 0x02 #define BK3710_BMIDTP 0x04 -#define BK3710_BMICS 0x08 -#define BK3710_BMISS 0x0A -#define BK3710_BMIDTS 0x0C #define BK3710_IDETIMP 0x40 -#define BK3710_IDETIMS 0x42 -#define BK3710_SIDETIM 0x44 -#define BK3710_SLEWCTL 0x45 #define BK3710_IDESTATUS 0x47 #define BK3710_UDMACTL 0x48 -#define BK3710_UDMATIM 0x4A #define BK3710_MISCCTL 0x50 #define BK3710_REGSTB 0x54 #define BK3710_REGRCVR 0x58 @@ -63,7 +56,6 @@ #define BK3710_UDMATRP 0x70 #define BK3710_UDMAENV 0x74 #define BK3710_IORDYTMP 0x78 -#define BK3710_IORDYTMS 0x7C static unsigned ideclk_period; /* in nanoseconds */ @@ -96,11 +88,6 @@ static void palm_bk3710_setudmamode(void __iomem *base, unsigned int dev, trp = DIV_ROUND_UP(palm_bk3710_udmatimings[mode].rptime, ideclk_period) - 1; - /* udmatim Register */ - val16 = readw(base + BK3710_UDMATIM) & (dev ? 0xFF0F : 0xFFF0); - val16 |= (mode << (dev ? 4 : 0)); - writew(val16, base + BK3710_UDMATIM); - /* udmastb Ultra DMA Access Strobe Width */ val32 = readl(base + BK3710_UDMASTB) & (0xFF << (dev ? 0 : 8)); val32 |= (t0 << (dev ? 8 : 0)); @@ -161,10 +148,11 @@ static void palm_bk3710_setpiomode(void __iomem *base, ide_drive_t *mate, u32 val32; struct ide_timing *t; + t = ide_timing_find_mode(XFER_PIO_0 + mode); + /* PIO Data Setup */ t0 = DIV_ROUND_UP(cycletime, ideclk_period); - t2 = DIV_ROUND_UP(ide_timing_find_mode(XFER_PIO_0 + mode)->active, - ideclk_period); + t2 = DIV_ROUND_UP(t->active, ideclk_period); t2i = t0 - t2 - 1; t2 -= 1; @@ -185,7 +173,6 @@ static void palm_bk3710_setpiomode(void __iomem *base, ide_drive_t *mate, } /* TASKFILE Setup */ - t = ide_timing_find_mode(XFER_PIO_0 + mode); t0 = DIV_ROUND_UP(t->cyc8b, ideclk_period); t2 = DIV_ROUND_UP(t->act8b, ideclk_period); @@ -234,42 +221,23 @@ static void palm_bk3710_set_pio_mode(ide_drive_t *drive, u8 pio) static void __devinit palm_bk3710_chipinit(void __iomem *base) { /* - * enable the reset_en of ATA controller so that when ata signals - * are brought out, by writing into device config. at that - * time por_n signal should not be 'Z' and have a stable value. + * REVISIT: the ATA reset signal needs to be managed through a + * GPIO, which means it should come from platform_data. Until + * we get and use such information, we have to trust that things + * have been reset before we get here. */ - writel(0x0300, base + BK3710_MISCCTL); - - /* wait for some time and deassert the reset of ATA Device. */ - mdelay(100); - - /* Deassert the Reset */ - writel(0x0200, base + BK3710_MISCCTL); /* * Program the IDETIMP Register Value based on the following assumptions * * (ATA_IDETIMP_IDEEN , ENABLE ) | - * (ATA_IDETIMP_SLVTIMEN , DISABLE) | - * (ATA_IDETIMP_RDYSMPL , 70NS) | - * (ATA_IDETIMP_RDYRCVRY , 50NS) | - * (ATA_IDETIMP_DMAFTIM1 , PIOCOMP) | * (ATA_IDETIMP_PREPOST1 , DISABLE) | - * (ATA_IDETIMP_RDYSEN1 , DISABLE) | - * (ATA_IDETIMP_PIOFTIM1 , DISABLE) | - * (ATA_IDETIMP_DMAFTIM0 , PIOCOMP) | * (ATA_IDETIMP_PREPOST0 , DISABLE) | - * (ATA_IDETIMP_RDYSEN0 , DISABLE) | - * (ATA_IDETIMP_PIOFTIM0 , DISABLE) - */ - writew(0xB388, base + BK3710_IDETIMP); - - /* - * Configure SIDETIM Register - * (ATA_SIDETIM_RDYSMPS1 ,120NS ) | - * (ATA_SIDETIM_RDYRCYS1 ,120NS ) + * + * DM6446 silicon rev 2.1 and earlier have no observed net benefit + * from enabling prefetch/postwrite. */ - writeb(0, base + BK3710_SIDETIM); + writew(BIT(15), base + BK3710_IDETIMP); /* * UDMACTL Ultra-ATA DMA Control @@ -281,11 +249,11 @@ static void __devinit palm_bk3710_chipinit(void __iomem *base) /* * MISCCTL Miscellaneous Conrol Register - * (ATA_MISCCTL_RSTMODEP , 1) | - * (ATA_MISCCTL_RESETP , 0) | + * (ATA_MISCCTL_HWNHLD1P , 1 cycle) + * (ATA_MISCCTL_HWNHLD0P , 1 cycle) * (ATA_MISCCTL_TIMORIDE , 1) */ - writel(0x201, base + BK3710_MISCCTL); + writel(0x001, base + BK3710_MISCCTL); /* * IORDYTMP IORDY Timer for Primary Register @@ -355,10 +323,9 @@ static int __init palm_bk3710_probe(struct platform_device *pdev) clk_enable(clk); rate = clk_get_rate(clk); - ideclk_period = 1000000000UL / rate; - /* Register the IDE interface with Linux ATA Interface */ - memset(&hw, 0, sizeof(hw)); + /* NOTE: round *down* to meet minimum timings; we count in clocks */ + ideclk_period = 1000000000UL / rate; mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (mem == NULL) { @@ -388,6 +355,7 @@ static int __init palm_bk3710_probe(struct platform_device *pdev) /* Configure the Palm Chip controller */ palm_bk3710_chipinit(base); + memset(&hw, 0, sizeof(hw)); for (i = 0; i < IDE_NR_PORTS - 2; i++) hw.io_ports_array[i] = (unsigned long) (base + IDE_PALM_ATA_PRI_REG_OFFSET + i); @@ -400,6 +368,7 @@ static int __init palm_bk3710_probe(struct platform_device *pdev) palm_bk3710_port_info.udma_mask = rate < 100000000 ? ATA_UDMA4 : ATA_UDMA5; + /* Register the IDE interface with Linux */ rc = ide_host_add(&palm_bk3710_port_info, hws, NULL); if (rc) goto out; -- cgit v1.2.3 From d7f5143522d938ea7c4f117c6fa6b1d3fa5af994 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Thu, 23 Apr 2009 22:53:45 +0200 Subject: palm_bk3710: palm_bk3710_udmatimings[] CodingStyle fixup Remove superfluous commas and add missing whitespaces. Noticed-by: Joe Perches Cc: David Brownell Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/palm_bk3710.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/ide/palm_bk3710.c b/drivers/ide/palm_bk3710.c index 13a5449aabf..09d813d313f 100644 --- a/drivers/ide/palm_bk3710.c +++ b/drivers/ide/palm_bk3710.c @@ -66,12 +66,12 @@ struct palm_bk3710_udmatiming { }; static const struct palm_bk3710_udmatiming palm_bk3710_udmatimings[6] = { - {160, 240 / 2,}, /* UDMA Mode 0 */ - {125, 160 / 2,}, /* UDMA Mode 1 */ - {100, 120 / 2,}, /* UDMA Mode 2 */ - {100, 90 / 2,}, /* UDMA Mode 3 */ - {100, 60 / 2,}, /* UDMA Mode 4 */ - {85, 40 / 2,}, /* UDMA Mode 5 */ + { 160, 240 / 2 }, /* UDMA Mode 0 */ + { 125, 160 / 2 }, /* UDMA Mode 1 */ + { 100, 120 / 2 }, /* UDMA Mode 2 */ + { 100, 90 / 2 }, /* UDMA Mode 3 */ + { 100, 60 / 2 }, /* UDMA Mode 4 */ + { 85, 40 / 2 }, /* UDMA Mode 5 */ }; static void palm_bk3710_setudmamode(void __iomem *base, unsigned int dev, -- cgit v1.2.3 From b930f964cfe65941c6b1ba61efedfe49da3f6353 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Thu, 23 Apr 2009 22:53:45 +0200 Subject: MAINTAINERS: update IDE entry By a popular demand quilt tree was replaced by a git one. Signed-off-by: Bartlomiej Zolnierkiewicz --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 0beac8a7f8f..2431b05c871 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2743,7 +2743,7 @@ IDE SUBSYSTEM P: Bartlomiej Zolnierkiewicz M: bzolnier@gmail.com L: linux-ide@vger.kernel.org -T: quilt kernel.org/pub/linux/kernel/people/bart/pata-2.6/ +T: git git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6.git S: Maintained F: Documentation/ide/ F: drivers/ide/ -- cgit v1.2.3 From 2d93148ab6988cad872e65d694c95e8944e1b626 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 14 Apr 2009 11:31:02 -0400 Subject: USB: serial: fix lifetime and locking problems This patch (as1229) fixes a few lifetime and locking problems in the usb-serial driver. The main symptom is that an invalid kevent is created when the serial device is unplugged while a connection is active. Ports should be unregistered when device is disconnected, not when the parent usb_serial structure is deallocated. Each open file should hold a reference to the corresponding port structure, and the reference should be released when the file is closed. serial->disc_mutex should be acquired in serial_open(), to resolve the classic race between open and disconnect. serial_close() doesn't need to hold both serial->disc_mutex and port->mutex at the same time. Release the subdriver's module reference only after releasing all the other references, in case one of the release routines needs to invoke some code in the subdriver module. Replace a call to flush_scheduled_work() (which is prone to deadlocks) with cancel_work_sync(). Also, add a call to cancel_work_sync() in the disconnect routine. Reduce the scope of serial->disc_mutex in serial_disconnect(). The only place it really needs to protect is where the "disconnected" flag is set. This fixes the bug reported in http://bugs.freedesktop.org/show_bug.cgi?id=20703 Signed-off-by: Alan Stern Tested-by: Dan Williams Tested-by: Ming Lei Reviewed-by: Oliver Neukum Acked-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/usb-serial.c | 104 ++++++++++++++++++++++++++-------------- 1 file changed, 68 insertions(+), 36 deletions(-) diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 2a70563bbee..0a566eea49c 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -137,22 +137,10 @@ static void destroy_serial(struct kref *kref) dbg("%s - %s", __func__, serial->type->description); - serial->type->shutdown(serial); - /* return the minor range that this device had */ if (serial->minor != SERIAL_TTY_NO_MINOR) return_serial(serial); - for (i = 0; i < serial->num_ports; ++i) - serial->port[i]->port.count = 0; - - /* the ports are cleaned up and released in port_release() */ - for (i = 0; i < serial->num_ports; ++i) - if (serial->port[i]->dev.parent != NULL) { - device_unregister(&serial->port[i]->dev); - serial->port[i] = NULL; - } - /* If this is a "fake" port, we have to clean it up here, as it will * not get cleaned up in port_release() as it was never registered with * the driver core */ @@ -187,7 +175,7 @@ static int serial_open (struct tty_struct *tty, struct file *filp) struct usb_serial *serial; struct usb_serial_port *port; unsigned int portNumber; - int retval; + int retval = 0; dbg("%s", __func__); @@ -198,21 +186,24 @@ static int serial_open (struct tty_struct *tty, struct file *filp) return -ENODEV; } + mutex_lock(&serial->disc_mutex); portNumber = tty->index - serial->minor; port = serial->port[portNumber]; - if (!port) { - retval = -ENODEV; - goto bailout_kref_put; - } - - if (port->serial->disconnected) { + if (!port || serial->disconnected) retval = -ENODEV; - goto bailout_kref_put; - } + else + get_device(&port->dev); + /* + * Note: Our locking order requirement does not allow port->mutex + * to be acquired while serial->disc_mutex is held. + */ + mutex_unlock(&serial->disc_mutex); + if (retval) + goto bailout_serial_put; if (mutex_lock_interruptible(&port->mutex)) { retval = -ERESTARTSYS; - goto bailout_kref_put; + goto bailout_port_put; } ++port->port.count; @@ -232,14 +223,20 @@ static int serial_open (struct tty_struct *tty, struct file *filp) goto bailout_mutex_unlock; } - retval = usb_autopm_get_interface(serial->interface); + mutex_lock(&serial->disc_mutex); + if (serial->disconnected) + retval = -ENODEV; + else + retval = usb_autopm_get_interface(serial->interface); if (retval) goto bailout_module_put; + /* only call the device specific open if this * is the first time the port is opened */ retval = serial->type->open(tty, port, filp); if (retval) goto bailout_interface_put; + mutex_unlock(&serial->disc_mutex); } mutex_unlock(&port->mutex); @@ -248,13 +245,16 @@ static int serial_open (struct tty_struct *tty, struct file *filp) bailout_interface_put: usb_autopm_put_interface(serial->interface); bailout_module_put: + mutex_unlock(&serial->disc_mutex); module_put(serial->type->driver.owner); bailout_mutex_unlock: port->port.count = 0; tty->driver_data = NULL; tty_port_tty_set(&port->port, NULL); mutex_unlock(&port->mutex); -bailout_kref_put: +bailout_port_put: + put_device(&port->dev); +bailout_serial_put: usb_serial_put(serial); return retval; } @@ -262,6 +262,9 @@ bailout_kref_put: static void serial_close(struct tty_struct *tty, struct file *filp) { struct usb_serial_port *port = tty->driver_data; + struct usb_serial *serial; + struct module *owner; + int count; if (!port) return; @@ -269,6 +272,8 @@ static void serial_close(struct tty_struct *tty, struct file *filp) dbg("%s - port %d", __func__, port->number); mutex_lock(&port->mutex); + serial = port->serial; + owner = serial->type->driver.owner; if (port->port.count == 0) { mutex_unlock(&port->mutex); @@ -281,7 +286,7 @@ static void serial_close(struct tty_struct *tty, struct file *filp) * this before we drop the port count. The call is protected * by the port mutex */ - port->serial->type->close(tty, port, filp); + serial->type->close(tty, port, filp); if (port->port.count == (port->console ? 2 : 1)) { struct tty_struct *tty = tty_port_tty_get(&port->port); @@ -295,17 +300,23 @@ static void serial_close(struct tty_struct *tty, struct file *filp) } } - if (port->port.count == 1) { - mutex_lock(&port->serial->disc_mutex); - if (!port->serial->disconnected) - usb_autopm_put_interface(port->serial->interface); - mutex_unlock(&port->serial->disc_mutex); - module_put(port->serial->type->driver.owner); - } --port->port.count; - + count = port->port.count; mutex_unlock(&port->mutex); - usb_serial_put(port->serial); + put_device(&port->dev); + + /* Mustn't dereference port any more */ + if (count == 0) { + mutex_lock(&serial->disc_mutex); + if (!serial->disconnected) + usb_autopm_put_interface(serial->interface); + mutex_unlock(&serial->disc_mutex); + } + usb_serial_put(serial); + + /* Mustn't dereference serial any more */ + if (count == 0) + module_put(owner); } static int serial_write(struct tty_struct *tty, const unsigned char *buf, @@ -549,7 +560,13 @@ static void kill_traffic(struct usb_serial_port *port) static void port_free(struct usb_serial_port *port) { + /* + * Stop all the traffic before cancelling the work, so that + * nobody will restart it by calling usb_serial_port_softint. + */ kill_traffic(port); + cancel_work_sync(&port->work); + usb_free_urb(port->read_urb); usb_free_urb(port->write_urb); usb_free_urb(port->interrupt_in_urb); @@ -558,7 +575,6 @@ static void port_free(struct usb_serial_port *port) kfree(port->bulk_out_buffer); kfree(port->interrupt_in_buffer); kfree(port->interrupt_out_buffer); - flush_scheduled_work(); /* port->work */ kfree(port); } @@ -1043,6 +1059,12 @@ void usb_serial_disconnect(struct usb_interface *interface) usb_set_intfdata(interface, NULL); /* must set a flag, to signal subdrivers */ serial->disconnected = 1; + mutex_unlock(&serial->disc_mutex); + + /* Unfortunately, many of the sub-drivers expect the port structures + * to exist when their shutdown method is called, so we have to go + * through this awkward two-step unregistration procedure. + */ for (i = 0; i < serial->num_ports; ++i) { port = serial->port[i]; if (port) { @@ -1052,11 +1074,21 @@ void usb_serial_disconnect(struct usb_interface *interface) tty_kref_put(tty); } kill_traffic(port); + cancel_work_sync(&port->work); + device_del(&port->dev); + } + } + serial->type->shutdown(serial); + for (i = 0; i < serial->num_ports; ++i) { + port = serial->port[i]; + if (port) { + put_device(&port->dev); + serial->port[i] = NULL; } } + /* let the last holder of this object * cause it to be cleaned up */ - mutex_unlock(&serial->disc_mutex); usb_serial_put(serial); dev_info(dev, "device disconnected\n"); } -- cgit v1.2.3 From 46c6e93faa85d1362e1d127dc28cf9d0b304a6f1 Mon Sep 17 00:00:00 2001 From: Chuck Short Date: Tue, 14 Apr 2009 20:50:31 +0200 Subject: USB: Unusual Device support for Gold MP3 Player Energy Reported by Alessio Treglia on https://bugs.launchpad.net/ubuntu/+source/linux/+bug/125250 User was getting the following errors in dmesg: [ 2158.139386] sd 5:0:0:1: ioctl_internal_command return code = 8000002 [ 2158.139390] : Current: sense key: No Sense [ 2158.139393] Additional sense: No additional sense information Adds unusual device support. modified: drivers/usb/storage/unusual_devs.h Signed-off-by: Chuck Short Signed-off-by: Tim Gardner Signed-off-by: Stefan Bader Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_devs.h | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 96db479d116..fa65a3b0860 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -1851,6 +1851,12 @@ UNUSUAL_DEV( 0xed06, 0x4500, 0x0001, 0x0001, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_CAPACITY_HEURISTICS), +/* Reported by Alessio Treglia */ +UNUSUAL_DEV( 0xed10, 0x7636, 0x0001, 0x0001, + "TGE", + "Digital MP3 Audio Player", + US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ), + /* Control/Bulk transport for all SubClass values */ USUAL_DEV(US_SC_RBC, US_PR_CB, USB_US_TYPE_STOR), USUAL_DEV(US_SC_8020, US_PR_CB, USB_US_TYPE_STOR), -- cgit v1.2.3 From f23e649bb605523b960434c5e18c8e9ad3f0b5bd Mon Sep 17 00:00:00 2001 From: David Lopo Date: Thu, 16 Apr 2009 14:35:24 -0700 Subject: USB: Gadget: MIPS CI13xxx UDC bugfixes Bug Fix: high speed detection in LPM mode Bug Fix: max packet size configuration when switching between HS and FS Signed-off-by: David Lopo Acked-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/ci13xxx_udc.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/usb/gadget/ci13xxx_udc.c b/drivers/usb/gadget/ci13xxx_udc.c index 22c65960c42..05af8813da5 100644 --- a/drivers/usb/gadget/ci13xxx_udc.c +++ b/drivers/usb/gadget/ci13xxx_udc.c @@ -142,7 +142,7 @@ static struct { #define CAP_DEVICEADDR (0x014UL) #define CAP_ENDPTLISTADDR (0x018UL) #define CAP_PORTSC (0x044UL) -#define CAP_DEVLC (0x0B4UL) +#define CAP_DEVLC (0x084UL) #define CAP_USBMODE (hw_bank.lpm ? 0x0C8UL : 0x068UL) #define CAP_ENDPTSETUPSTAT (hw_bank.lpm ? 0x0D8UL : 0x06CUL) #define CAP_ENDPTPRIME (hw_bank.lpm ? 0x0DCUL : 0x070UL) @@ -1986,6 +1986,8 @@ static int ep_enable(struct usb_ep *ep, do { dbg_event(_usb_addr(mEp), "ENABLE", 0); + mEp->qh[mEp->dir].ptr->cap = 0; + if (mEp->type == USB_ENDPOINT_XFER_CONTROL) mEp->qh[mEp->dir].ptr->cap |= QH_IOS; else if (mEp->type == USB_ENDPOINT_XFER_ISOC) -- cgit v1.2.3 From 9cceedb8a87f31e341c1bf1bc6c28a13f9632aff Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Fri, 17 Apr 2009 13:52:00 +0300 Subject: USB: musb: Remove my email address from few musb related drivers This email address is going to expire soon and my contribution to musb is next to zero so remove it. Signed-off-by: Jarkko Nikula Cc: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/omap2430.c | 1 - drivers/usb/musb/tusb6010.c | 1 - drivers/usb/musb/tusb6010.h | 1 - 3 files changed, 3 deletions(-) diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index 901dffdf23b..60924ce0849 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -3,7 +3,6 @@ * Some code has been taken from tusb6010.c * Copyrights for that are attributable to: * Copyright (C) 2006 Nokia Corporation - * Jarkko Nikula * Tony Lindgren * * This file is part of the Inventra Controller Driver for Linux. diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c index 9e20fd070d7..4ac1477d356 100644 --- a/drivers/usb/musb/tusb6010.c +++ b/drivers/usb/musb/tusb6010.c @@ -2,7 +2,6 @@ * TUSB6010 USB 2.0 OTG Dual Role controller * * Copyright (C) 2006 Nokia Corporation - * Jarkko Nikula * Tony Lindgren * * This program is free software; you can redistribute it and/or modify diff --git a/drivers/usb/musb/tusb6010.h b/drivers/usb/musb/tusb6010.h index ab8c96286ce..35c933a5d99 100644 --- a/drivers/usb/musb/tusb6010.h +++ b/drivers/usb/musb/tusb6010.h @@ -2,7 +2,6 @@ * Definitions for TUSB6010 USB 2.0 OTG Dual Role controller * * Copyright (C) 2006 Nokia Corporation - * Jarkko Nikula * Tony Lindgren * * This program is free software; you can redistribute it and/or modify -- cgit v1.2.3 From 10c966c310da12e1e3f68d717a8e15274fdadf29 Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Fri, 17 Apr 2009 15:19:14 +0400 Subject: USB: musb: fix build when !CONFIG_PM Fix this build error when CONFIG_PM is not set: drivers/usb/musb/musb_core.c:2232: error: 'musb_resume_early' undeclared here Signed-off-by: Alexander Beregalov Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 0112353ec97..4000cf6d1e8 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -2191,7 +2191,7 @@ static int musb_resume_early(struct platform_device *pdev) #else #define musb_suspend NULL -#define musb_resume NULL +#define musb_resume_early NULL #endif static struct platform_driver musb_driver = { -- cgit v1.2.3 From e9b8cffa923e8eb3fe70ea05d3fcfffc90a71a57 Mon Sep 17 00:00:00 2001 From: Tony Cook Date: Sat, 18 Apr 2009 22:42:18 +0930 Subject: USB: mos7840: add new device id add USB ids for the mos7840 based ATEN International serial devices. Contributed by: Phillip Branch Signed-off-by: Tony Cook Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/mos7840.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index 2c20e88a91b..567985b7013 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -123,6 +123,11 @@ #define BANDB_DEVICE_ID_USOPTL4_4 0xAC44 #define BANDB_DEVICE_ID_USOPTL4_2 0xAC42 +/* This driver also supports the ATEN UC2324 device since it is mos7840 based + * - if I knew the device id it would also support the ATEN UC2322 */ +#define USB_VENDOR_ID_ATENINTL 0x0557 +#define ATENINTL_DEVICE_ID_UC2324 0x2011 + /* Interrupt Routine Defines */ #define SERIAL_IIR_RLS 0x06 @@ -170,6 +175,7 @@ static struct usb_device_id moschip_port_id_table[] = { {USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7820)}, {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4)}, {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2)}, + {USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2324)}, {} /* terminating entry */ }; @@ -178,6 +184,7 @@ static __devinitdata struct usb_device_id moschip_id_table_combined[] = { {USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7820)}, {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4)}, {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2)}, + {USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2324)}, {} /* terminating entry */ }; -- cgit v1.2.3 From 37768adf9a1d49aeac0db1ba3dc28b3274b7b789 Mon Sep 17 00:00:00 2001 From: Tony Cook Date: Sat, 18 Apr 2009 22:42:18 +0930 Subject: USB: fix mos7840 problem with minor numbers This patch fixes a problem with any mos7840 device where the use of the field "minor" before it is initialised results in all the devices being overlaid in memory (minor = 0 for all instances) Contributed by: Phillip Branch Signed-off-by: Tony Cook Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/mos7840.c | 30 +++++++++++++++++++----------- 1 file changed, 19 insertions(+), 11 deletions(-) diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index 567985b7013..499b7b82a0e 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -38,7 +38,7 @@ /* * Version Information */ -#define DRIVER_VERSION "1.3.1" +#define DRIVER_VERSION "1.3.2" #define DRIVER_DESC "Moschip 7840/7820 USB Serial Driver" /* @@ -2484,9 +2484,14 @@ static int mos7840_startup(struct usb_serial *serial) mos7840_set_port_private(serial->port[i], mos7840_port); spin_lock_init(&mos7840_port->pool_lock); - mos7840_port->port_num = ((serial->port[i]->number - - (serial->port[i]->serial->minor)) + - 1); + /* minor is not initialised until later by + * usb-serial.c:get_free_serial() and cannot therefore be used + * to index device instances */ + mos7840_port->port_num = i + 1; + dbg ("serial->port[i]->number = %d", serial->port[i]->number); + dbg ("serial->port[i]->serial->minor = %d", serial->port[i]->serial->minor); + dbg ("mos7840_port->port_num = %d", mos7840_port->port_num); + dbg ("serial->minor = %d", serial->minor); if (mos7840_port->port_num == 1) { mos7840_port->SpRegOffset = 0x0; @@ -2697,13 +2702,16 @@ static void mos7840_shutdown(struct usb_serial *serial) for (i = 0; i < serial->num_ports; ++i) { mos7840_port = mos7840_get_port_private(serial->port[i]); - spin_lock_irqsave(&mos7840_port->pool_lock, flags); - mos7840_port->zombie = 1; - spin_unlock_irqrestore(&mos7840_port->pool_lock, flags); - usb_kill_urb(mos7840_port->control_urb); - kfree(mos7840_port->ctrl_buf); - kfree(mos7840_port->dr); - kfree(mos7840_port); + dbg ("mos7840_port %d = %p", i, mos7840_port); + if (mos7840_port) { + spin_lock_irqsave(&mos7840_port->pool_lock, flags); + mos7840_port->zombie = 1; + spin_unlock_irqrestore(&mos7840_port->pool_lock, flags); + usb_kill_urb(mos7840_port->control_urb); + kfree(mos7840_port->ctrl_buf); + kfree(mos7840_port->dr); + kfree(mos7840_port); + } mos7840_set_port_private(serial->port[i], NULL); } -- cgit v1.2.3 From c065c60e83c006611caed23d1320450fcd709398 Mon Sep 17 00:00:00 2001 From: Dan Streetman Date: Tue, 21 Apr 2009 13:37:12 -0400 Subject: USB: ehci-sched.c: EHCI SITD scheduling bugfix Without this patch, the driver won't check that the last fully-occupied uframe for a new split transaction was vacant beforehand. This can lead to a situation in which the first 188 bytes of a 192-byte isochronous transfer are scheduled in the same uframe as an existing interrupt transfer. The resulting schedule looks like this: uframe 0: 188-byte isoc-OUT SSPLIT, 8-byte int-IN SSPLIT uframe 1: 4-byte isoc-OUT SSPLIT The SSPLITs are intermingled, causing an error in the downstream hub's TT. If you are having problems with devices or hub ports resetting, or failed interrupt transfers, when you start using a USB audio or video (Isochronous) device, this patch may help. Signed-off-by: Dan Streetman Reported-by: Kung James Acked-by: David Brownell Cc: Alan Stern --- drivers/usb/host/ehci-sched.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c index ada5d2ba297..556d0ec0c1f 100644 --- a/drivers/usb/host/ehci-sched.c +++ b/drivers/usb/host/ehci-sched.c @@ -323,7 +323,7 @@ static int tt_available ( * already scheduled transactions */ if (125 < usecs) { - int ufs = (usecs / 125) - 1; + int ufs = (usecs / 125); int i; for (i = uframe; i < (uframe + ufs) && i < 8; i++) if (0 < tt_usecs[i]) { -- cgit v1.2.3 From 82a10a81c853be3859b3d222db0f372ee8d2eaa2 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 16 Apr 2009 15:37:28 -0400 Subject: USB: g_file_storage: fix use-after-free bug when closing files This patch (as1231) fixes a use-after-free bug in g_file_storage. A device's name may not be available after the device is unregistered, even if the device structure itself is still allocated. Since close_backing_file() prints a LUN's name for debugging, it shouldn't be called after the LUN has been unregistered. That whole area needed to be cleaned up; the backing files were getting closed in a couple of different places. The patch fixes things so that they get closed in just one place, as part of the unbind procedure, immediately before the LUN is unregistered. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/file_storage.c | 20 ++++---------------- 1 file changed, 4 insertions(+), 16 deletions(-) diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c index 5c030b080d4..381a53b3e11 100644 --- a/drivers/usb/gadget/file_storage.c +++ b/drivers/usb/gadget/file_storage.c @@ -738,7 +738,6 @@ static struct fsg_dev *the_fsg; static struct usb_gadget_driver fsg_driver; static void close_backing_file(struct lun *curlun); -static void close_all_backing_files(struct fsg_dev *fsg); /*-------------------------------------------------------------------------*/ @@ -3593,12 +3592,10 @@ static int fsg_main_thread(void *fsg_) fsg->thread_task = NULL; spin_unlock_irq(&fsg->lock); - /* In case we are exiting because of a signal, unregister the - * gadget driver and close the backing file. */ - if (test_and_clear_bit(REGISTERED, &fsg->atomic_bitflags)) { + /* If we are exiting because of a signal, unregister the + * gadget driver. */ + if (test_and_clear_bit(REGISTERED, &fsg->atomic_bitflags)) usb_gadget_unregister_driver(&fsg_driver); - close_all_backing_files(fsg); - } /* Let the unbind and cleanup routines know the thread has exited */ complete_and_exit(&fsg->thread_notifier, 0); @@ -3703,14 +3700,6 @@ static void close_backing_file(struct lun *curlun) } } -static void close_all_backing_files(struct fsg_dev *fsg) -{ - int i; - - for (i = 0; i < fsg->nluns; ++i) - close_backing_file(&fsg->luns[i]); -} - static ssize_t show_ro(struct device *dev, struct device_attribute *attr, char *buf) { @@ -3845,6 +3834,7 @@ static void /* __init_or_exit */ fsg_unbind(struct usb_gadget *gadget) if (curlun->registered) { device_remove_file(&curlun->dev, &dev_attr_ro); device_remove_file(&curlun->dev, &dev_attr_file); + close_backing_file(curlun); device_unregister(&curlun->dev); curlun->registered = 0; } @@ -4190,7 +4180,6 @@ autoconf_fail: out: fsg->state = FSG_STATE_TERMINATED; // The thread is dead fsg_unbind(gadget); - close_all_backing_files(fsg); complete(&fsg->thread_notifier); return rc; } @@ -4284,7 +4273,6 @@ static void __exit fsg_cleanup(void) /* Wait for the thread to finish up */ wait_for_completion(&fsg->thread_notifier); - close_all_backing_files(fsg); kref_put(&fsg->ref, fsg_release); } module_exit(fsg_cleanup); -- cgit v1.2.3 From a8aa401f38cfb5fa26e970b48e93fb851d68fe64 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Sat, 18 Apr 2009 11:00:39 +0200 Subject: USB: pass mem_flags to dma_alloc_coherent When I want to use my webcam, I get: vvvvvvv cheese: page allocation failure. order:5, mode:0x8004 Pid: 8100, comm: cheese Not tainted 2.6.30-rc2-wl-dirty #102 Call Trace: [] __alloc_pages_internal+0x3fe/0x520 [] dma_generic_alloc_coherent+0x90/0x120 [] hcd_buffer_alloc+0xee/0x130 [usbcore] [] usb_buffer_alloc+0x2d/0x40 [usbcore] [] uvc_alloc_urb_buffers+0x84/0x140 [uvcvideo] [] uvc_init_video+0x126/0x400 [uvcvideo] [...] Oddly, I remembered fixing this and putting in __GFP_NOWARN because uvcvideo retries a smaller allocation. However, the allocation function doesn't pass the gfp flags through to dma_alloc_coherent so we still get the warning! Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/buffer.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/core/buffer.c b/drivers/usb/core/buffer.c index cadb2dc1d28..3ba2fff7149 100644 --- a/drivers/usb/core/buffer.c +++ b/drivers/usb/core/buffer.c @@ -119,7 +119,7 @@ void *hcd_buffer_alloc( if (size <= pool_max [i]) return dma_pool_alloc(hcd->pool [i], mem_flags, dma); } - return dma_alloc_coherent(hcd->self.controller, size, dma, 0); + return dma_alloc_coherent(hcd->self.controller, size, dma, mem_flags); } void hcd_buffer_free( -- cgit v1.2.3 From fbfc396efbc11d784b4325adfc02e82a0df01a8d Mon Sep 17 00:00:00 2001 From: "Mark A. Greer" Date: Tue, 21 Apr 2009 20:52:54 -0700 Subject: USB: musb: Prevent multiple includes of musb.h Add #ifndef to musb header file to prevent multiple inclusions. Signed-off-by: Mark A. Greer Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/musb.h | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/include/linux/usb/musb.h b/include/linux/usb/musb.h index d6aad0ea603..d4375566926 100644 --- a/include/linux/usb/musb.h +++ b/include/linux/usb/musb.h @@ -7,6 +7,9 @@ * key configuration differences between boards. */ +#ifndef __LINUX_USB_MUSB_H +#define __LINUX_USB_MUSB_H + /* The USB role is defined by the connector used on the board, so long as * standards are being followed. (Developer boards sometimes won't.) */ @@ -101,3 +104,5 @@ extern int __init tusb6010_setup_interface( extern int tusb6010_platform_retime(unsigned is_refclk); #endif /* OMAP2 */ + +#endif /* __LINUX_USB_MUSB_H */ -- cgit v1.2.3 From 36825a2deca913a11915893b6ecf5e1d817b6e75 Mon Sep 17 00:00:00 2001 From: Matthias Kaehlcke Date: Wed, 15 Apr 2009 22:28:36 +0200 Subject: USB: ci13xxx_udc: fix build error Fix build error in the MIPS USB IP core family device controller driver. The driver calls udelay() without including linux/delay.h Signed-off-by: Matthias Kaehlcke Acked-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/ci13xxx_udc.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/gadget/ci13xxx_udc.c b/drivers/usb/gadget/ci13xxx_udc.c index 05af8813da5..38e531ecae4 100644 --- a/drivers/usb/gadget/ci13xxx_udc.c +++ b/drivers/usb/gadget/ci13xxx_udc.c @@ -51,6 +51,7 @@ * - Gadget API (majority of optional features) * - Suspend & Remote Wakeup */ +#include #include #include #include -- cgit v1.2.3 From 864e28b4f24106b799e991fa136fa6fa2b638a68 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Thu, 16 Apr 2009 13:51:46 -0700 Subject: USB: gadget: omap_udc uses platform_driver_probe() We now have a more correct solution for shrinking runtime driver footprints than just marking probe() as __init ... use it. Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/omap_udc.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c index 57d9641c6bf..a2db0e174f2 100644 --- a/drivers/usb/gadget/omap_udc.c +++ b/drivers/usb/gadget/omap_udc.c @@ -3104,7 +3104,6 @@ static int omap_udc_resume(struct platform_device *dev) /*-------------------------------------------------------------------------*/ static struct platform_driver udc_driver = { - .probe = omap_udc_probe, .remove = __exit_p(omap_udc_remove), .suspend = omap_udc_suspend, .resume = omap_udc_resume, @@ -3122,7 +3121,7 @@ static int __init udc_init(void) #endif "%s\n", driver_desc, use_dma ? " (dma)" : ""); - return platform_driver_register(&udc_driver); + return platform_driver_probe(&udc_driver, omap_udc_probe); } module_init(udc_init); -- cgit v1.2.3 From 212b8f0c3f5a2280bfa1d6ab13a6fe98552becaa Mon Sep 17 00:00:00 2001 From: Elina Pasheva Date: Tue, 21 Apr 2009 17:54:42 -0700 Subject: USB: serial: sierra driver bug fix for composite interface This patch fixes a problem in sierra_send_setup() function when composite devices are used. One should not be sending ACM commands to interfaces that are OBEX. Doing this causes an apparent failure as the ACM command has to time out before the interface can start being used. Signed-off-by: Elina Pasheva Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/sierra.c | 21 +++++++++++++++++---- 1 file changed, 17 insertions(+), 4 deletions(-) diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index d9bf9a5c20e..7da3775a097 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -14,7 +14,7 @@ Whom based his on the Keyspan driver by Hugh Blemings */ -#define DRIVER_VERSION "v.1.3.2" +#define DRIVER_VERSION "v.1.3.3" #define DRIVER_AUTHOR "Kevin Lloyd " #define DRIVER_DESC "USB Driver for Sierra Wireless USB modems" @@ -259,9 +259,21 @@ static int sierra_send_setup(struct tty_struct *tty, val |= 0x02; /* If composite device then properly report interface */ - if (serial->num_ports == 1) + if (serial->num_ports == 1) { interface = sierra_calc_interface(serial); + /* Control message is sent only to interfaces with + * interrupt_in endpoints + */ + if (port->interrupt_in_urb) { + /* send control message */ + return usb_control_msg(serial->dev, + usb_rcvctrlpipe(serial->dev, 0), + 0x22, 0x21, val, interface, + NULL, 0, USB_CTRL_SET_TIMEOUT); + } + } + /* Otherwise the need to do non-composite mapping */ else { if (port->bulk_out_endpointAddress == 2) @@ -270,12 +282,13 @@ static int sierra_send_setup(struct tty_struct *tty, interface = 1; else if (port->bulk_out_endpointAddress == 5) interface = 2; - } - return usb_control_msg(serial->dev, + return usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), 0x22, 0x21, val, interface, NULL, 0, USB_CTRL_SET_TIMEOUT); + + } } return 0; -- cgit v1.2.3 From 2400a2bfbd0e912193fe3b077f492d4980141813 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Mon, 20 Apr 2009 17:28:53 +0200 Subject: USB: removal of tty->low_latency hack dating back to the old serial code This removes tty->low_latency from all USB serial drivers that push data into the tty layer at hard interrupt context. It's no longer needed and actually harmful. Signed-off-by: Oliver Neukum Cc: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/cyberjack.c | 7 ------- drivers/usb/serial/cypress_m8.c | 4 ---- drivers/usb/serial/empeg.c | 6 ------ drivers/usb/serial/garmin_gps.c | 8 -------- drivers/usb/serial/generic.c | 6 ------ drivers/usb/serial/io_edgeport.c | 8 -------- drivers/usb/serial/io_ti.c | 8 -------- drivers/usb/serial/ipaq.c | 6 ------ drivers/usb/serial/ipw.c | 3 --- drivers/usb/serial/iuu_phoenix.c | 1 - drivers/usb/serial/kobil_sct.c | 6 ------ drivers/usb/serial/mos7720.c | 7 ------- drivers/usb/serial/mos7840.c | 6 ------ drivers/usb/serial/opticon.c | 8 -------- drivers/usb/serial/option.c | 3 --- drivers/usb/serial/sierra.c | 3 --- drivers/usb/serial/ti_usb_3410_5052.c | 14 +------------- drivers/usb/serial/visor.c | 8 -------- 18 files changed, 1 insertion(+), 111 deletions(-) diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c index 858bdd038fb..dd501bb63ed 100644 --- a/drivers/usb/serial/cyberjack.c +++ b/drivers/usb/serial/cyberjack.c @@ -175,13 +175,6 @@ static int cyberjack_open(struct tty_struct *tty, dbg("%s - usb_clear_halt", __func__); usb_clear_halt(port->serial->dev, port->write_urb->pipe); - /* force low_latency on so that our tty_push actually forces - * the data through, otherwise it is scheduled, and with high - * data rates (like with OHCI) data can get lost. - */ - if (tty) - tty->low_latency = 1; - priv = usb_get_serial_port_data(port); spin_lock_irqsave(&priv->lock, flags); priv->rdtodo = 0; diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index eae4740d448..e568710b263 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -656,10 +656,6 @@ static int cypress_open(struct tty_struct *tty, priv->rx_flags = 0; spin_unlock_irqrestore(&priv->lock, flags); - /* setting to zero could cause data loss */ - if (tty) - tty->low_latency = 1; - /* raise both lines and set termios */ spin_lock_irqsave(&priv->lock, flags); priv->line_control = CONTROL_DTR | CONTROL_RTS; diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c index 8a69cce40b6..c709ec474a8 100644 --- a/drivers/usb/serial/empeg.c +++ b/drivers/usb/serial/empeg.c @@ -478,12 +478,6 @@ static void empeg_set_termios(struct tty_struct *tty, termios->c_cflag |= CS8; /* character size 8 bits */ - /* - * Force low_latency on; otherwise the pushes are scheduled; - * this is bad as it opens up the possibility of dropping bytes - * on the floor. We don't want to drop bytes on the floor. :) - */ - tty->low_latency = 1; tty_encode_baud_rate(tty, 115200, 115200); } diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c index a26a0e2cdb4..586d30ff450 100644 --- a/drivers/usb/serial/garmin_gps.c +++ b/drivers/usb/serial/garmin_gps.c @@ -973,14 +973,6 @@ static int garmin_open(struct tty_struct *tty, dbg("%s - port %d", __func__, port->number); - /* - * Force low_latency on so that our tty_push actually forces the data - * through, otherwise it is scheduled, and with high data rates (like - * with OHCI) data can get lost. - */ - if (tty) - tty->low_latency = 1; - spin_lock_irqsave(&garmin_data_p->lock, flags); garmin_data_p->mode = initial_mode; garmin_data_p->count = 0; diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index 9d57cace373..4cec9906ccf 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -122,12 +122,6 @@ int usb_serial_generic_open(struct tty_struct *tty, dbg("%s - port %d", __func__, port->number); - /* force low_latency on so that our tty_push actually forces the data - through, otherwise it is scheduled, and with high data rates (like - with OHCI) data can get lost. */ - if (tty) - tty->low_latency = 1; - /* clear the throttle flags */ spin_lock_irqsave(&port->lock, flags); port->throttled = 0; diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index e85c8c0d1ad..fb4a73d090f 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -193,8 +193,6 @@ static const struct divisor_table_entry divisor_table[] = { /* local variables */ static int debug; -static int low_latency = 1; /* tty low latency flag, on by default */ - static atomic_t CmdUrbs; /* Number of outstanding Command Write Urbs */ @@ -867,9 +865,6 @@ static int edge_open(struct tty_struct *tty, if (edge_port == NULL) return -ENODEV; - if (tty) - tty->low_latency = low_latency; - /* see if we've set up our endpoint info yet (can't set it up in edge_startup as the structures were not set up at that time.) */ serial = port->serial; @@ -3299,6 +3294,3 @@ MODULE_FIRMWARE("edgeport/down2.fw"); module_param(debug, bool, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(debug, "Debug enabled or not"); - -module_param(low_latency, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(low_latency, "Low latency enabled or not"); diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index c3cdd00ddc4..513b25e044c 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -76,7 +76,6 @@ struct edgeport_uart_buf_desc { #define EDGE_READ_URB_STOPPING 1 #define EDGE_READ_URB_STOPPED 2 -#define EDGE_LOW_LATENCY 1 #define EDGE_CLOSING_WAIT 4000 /* in .01 sec */ #define EDGE_OUT_BUF_SIZE 1024 @@ -232,7 +231,6 @@ static unsigned short OperationalBuildNumber; static int debug; -static int low_latency = EDGE_LOW_LATENCY; static int closing_wait = EDGE_CLOSING_WAIT; static int ignore_cpu_rev; static int default_uart_mode; /* RS232 */ @@ -1850,9 +1848,6 @@ static int edge_open(struct tty_struct *tty, if (edge_port == NULL) return -ENODEV; - if (tty) - tty->low_latency = low_latency; - port_number = port->number - port->serial->minor; switch (port_number) { case 0: @@ -3008,9 +3003,6 @@ MODULE_FIRMWARE("edgeport/down3.bin"); module_param(debug, bool, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(debug, "Debug enabled or not"); -module_param(low_latency, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(low_latency, "Low latency enabled or not"); - module_param(closing_wait, int, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(closing_wait, "Maximum wait for data to drain, in .01 secs"); diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c index ef92095b073..cd62825a9ac 100644 --- a/drivers/usb/serial/ipaq.c +++ b/drivers/usb/serial/ipaq.c @@ -631,13 +631,7 @@ static int ipaq_open(struct tty_struct *tty, priv->free_len += PACKET_SIZE; } - /* - * Force low latency on. This will immediately push data to the line - * discipline instead of queueing. - */ - if (tty) { - tty->low_latency = 1; /* FIXME: These two are bogus */ tty->raw = 1; tty->real_raw = 1; diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c index f530032ed93..da2a2b46644 100644 --- a/drivers/usb/serial/ipw.c +++ b/drivers/usb/serial/ipw.c @@ -207,9 +207,6 @@ static int ipw_open(struct tty_struct *tty, if (!buf_flow_init) return -ENOMEM; - if (tty) - tty->low_latency = 1; - /* --1: Tell the modem to initialize (we think) From sniffs this is * always the first thing that gets sent to the modem during * opening of the device */ diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c index 2314c6ae4fc..4473d442b2a 100644 --- a/drivers/usb/serial/iuu_phoenix.c +++ b/drivers/usb/serial/iuu_phoenix.c @@ -1051,7 +1051,6 @@ static int iuu_open(struct tty_struct *tty, tty->termios->c_oflag = 0; tty->termios->c_iflag = 0; priv->termios_initialized = 1; - tty->low_latency = 1; priv->poll = 0; } spin_unlock_irqrestore(&priv->lock, flags); diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c index 6286baad939..c148544953b 100644 --- a/drivers/usb/serial/kobil_sct.c +++ b/drivers/usb/serial/kobil_sct.c @@ -231,13 +231,7 @@ static int kobil_open(struct tty_struct *tty, /* someone sets the dev to 0 if the close method has been called */ port->interrupt_in_urb->dev = port->serial->dev; - - /* force low_latency on so that our tty_push actually forces - * the data through, otherwise it is scheduled, and with high - * data rates (like with OHCI) data can get lost. - */ if (tty) { - tty->low_latency = 1; /* Default to echo off and other sane device settings */ tty->termios->c_lflag = 0; diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c index e772cc0a97f..24e3b5d4b4d 100644 --- a/drivers/usb/serial/mos7720.c +++ b/drivers/usb/serial/mos7720.c @@ -446,13 +446,6 @@ static int mos7720_open(struct tty_struct *tty, data = 0x0c; send_mos_cmd(serial, MOS_WRITE, port_number, 0x01, &data); - /* force low_latency on so that our tty_push actually forces * - * the data through,otherwise it is scheduled, and with * - * high data rates (like with OHCI) data can get lost. */ - - if (tty) - tty->low_latency = 1; - /* see if we've set up our endpoint info yet * * (can't set it up in mos7720_startup as the * * structures were not set up at that time.) */ diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index 499b7b82a0e..84fb1dcd30d 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -1007,12 +1007,6 @@ static int mos7840_open(struct tty_struct *tty, status = mos7840_set_reg_sync(port, mos7840_port->ControlRegOffset, Data); - /* force low_latency on so that our tty_push actually forces * - * the data through,otherwise it is scheduled, and with * - * high data rates (like with OHCI) data can get lost. */ - if (tty) - tty->low_latency = 1; - /* Check to see if we've set up our endpoint info yet * * (can't set it up in mos7840_startup as the structures * * were not set up at that time.) */ diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c index 839583dc8b6..b500ad10b75 100644 --- a/drivers/usb/serial/opticon.c +++ b/drivers/usb/serial/opticon.c @@ -159,14 +159,6 @@ static int opticon_open(struct tty_struct *tty, struct usb_serial_port *port, priv->port = port; spin_unlock_irqrestore(&priv->lock, flags); - /* - * Force low_latency on so that our tty_push actually forces the data - * through, otherwise it is scheduled, and with high data rates (like - * with OHCI) data can get lost. - */ - if (tty) - tty->low_latency = 1; - /* Start reading from the device */ usb_fill_bulk_urb(priv->bulk_read_urb, priv->udev, usb_rcvbulkpipe(priv->udev, diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 47bd070f24b..7817b82889c 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -936,9 +936,6 @@ static int option_open(struct tty_struct *tty, usb_pipeout(urb->pipe), 0); */ } - if (tty) - tty->low_latency = 1; - option_send_setup(tty, port); return 0; diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index 7da3775a097..913225c6161 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -598,9 +598,6 @@ static int sierra_open(struct tty_struct *tty, } } - if (tty) - tty->low_latency = 1; - sierra_send_setup(tty, port); /* start up the interrupt endpoint if we have one */ diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index 9c4c700c7cc..0a64bac306e 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -50,11 +50,10 @@ #define TI_TRANSFER_TIMEOUT 2 -#define TI_DEFAULT_LOW_LATENCY 0 #define TI_DEFAULT_CLOSING_WAIT 4000 /* in .01 secs */ /* supported setserial flags */ -#define TI_SET_SERIAL_FLAGS (ASYNC_LOW_LATENCY) +#define TI_SET_SERIAL_FLAGS 0 /* read urb states */ #define TI_READ_URB_RUNNING 0 @@ -161,7 +160,6 @@ static int ti_buf_get(struct circ_buf *cb, char *buf, int count); /* module parameters */ static int debug; -static int low_latency = TI_DEFAULT_LOW_LATENCY; static int closing_wait = TI_DEFAULT_CLOSING_WAIT; static ushort vendor_3410[TI_EXTRA_VID_PID_COUNT]; static unsigned int vendor_3410_count; @@ -296,10 +294,6 @@ MODULE_FIRMWARE("mts_edge.fw"); module_param(debug, bool, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(debug, "Enable debugging, 0=no, 1=yes"); -module_param(low_latency, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(low_latency, - "TTY low_latency flag, 0=off, 1=on, default is off"); - module_param(closing_wait, int, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(closing_wait, "Maximum wait for data to drain in close, in .01 secs, default is 4000"); @@ -448,7 +442,6 @@ static int ti_startup(struct usb_serial *serial) spin_lock_init(&tport->tp_lock); tport->tp_uart_base_addr = (i == 0 ? TI_UART1_BASE_ADDR : TI_UART2_BASE_ADDR); - tport->tp_flags = low_latency ? ASYNC_LOW_LATENCY : 0; tport->tp_closing_wait = closing_wait; init_waitqueue_head(&tport->tp_msr_wait); init_waitqueue_head(&tport->tp_write_wait); @@ -528,10 +521,6 @@ static int ti_open(struct tty_struct *tty, if (mutex_lock_interruptible(&tdev->td_open_close_lock)) return -ERESTARTSYS; - if (tty) - tty->low_latency = - (tport->tp_flags & ASYNC_LOW_LATENCY) ? 1 : 0; - port_number = port->number - port->serial->minor; memset(&(tport->tp_icount), 0x00, sizeof(tport->tp_icount)); @@ -1454,7 +1443,6 @@ static int ti_set_serial_info(struct tty_struct *tty, struct ti_port *tport, return -EFAULT; tport->tp_flags = new_serial.flags & TI_SET_SERIAL_FLAGS; - tty->low_latency = (tport->tp_flags & ASYNC_LOW_LATENCY) ? 1 : 0; tport->tp_closing_wait = new_serial.closing_wait; return 0; diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c index 4facce3d936..5ac414bda71 100644 --- a/drivers/usb/serial/visor.c +++ b/drivers/usb/serial/visor.c @@ -296,14 +296,6 @@ static int visor_open(struct tty_struct *tty, struct usb_serial_port *port, priv->throttled = 0; spin_unlock_irqrestore(&priv->lock, flags); - /* - * Force low_latency on so that our tty_push actually forces the data - * through, otherwise it is scheduled, and with high data rates (like - * with OHCI) data can get lost. - */ - if (tty) - tty->low_latency = 1; - /* Start reading from the device */ usb_fill_bulk_urb(port->read_urb, serial->dev, usb_rcvbulkpipe(serial->dev, -- cgit v1.2.3 From 052fbc0d7f76106725c998183d64dcacecd21f8f Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Mon, 20 Apr 2009 17:24:49 +0200 Subject: USB: correct error handling in cdc-wdm This patch to cdc-wdm - checks for partial extra descriptors - fixes a leak in the error case of probe - checks for an exact number of endpoints - adds a clarifying comment Signed-off-by: Oliver Neukum Cc: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-wdm.c | 27 ++++++++++++++++++--------- 1 file changed, 18 insertions(+), 9 deletions(-) diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c index 34e6108e1d4..0fe434505ac 100644 --- a/drivers/usb/class/cdc-wdm.c +++ b/drivers/usb/class/cdc-wdm.c @@ -3,7 +3,7 @@ * * This driver supports USB CDC WCM Device Management. * - * Copyright (c) 2007-2008 Oliver Neukum + * Copyright (c) 2007-2009 Oliver Neukum * * Some code taken from cdc-acm.c * @@ -610,7 +610,7 @@ static int wdm_probe(struct usb_interface *intf, const struct usb_device_id *id) if (!buffer) goto out; - while (buflen > 0) { + while (buflen > 2) { if (buffer [1] != USB_DT_CS_INTERFACE) { dev_err(&intf->dev, "skipping garbage\n"); goto next_desc; @@ -646,16 +646,18 @@ next_desc: spin_lock_init(&desc->iuspin); init_waitqueue_head(&desc->wait); desc->wMaxCommand = maxcom; + /* this will be expanded and needed in hardware endianness */ desc->inum = cpu_to_le16((u16)intf->cur_altsetting->desc.bInterfaceNumber); desc->intf = intf; INIT_WORK(&desc->rxwork, wdm_rxwork); - iface = &intf->altsetting[0]; + rv = -EINVAL; + iface = intf->cur_altsetting; + if (iface->desc.bNumEndpoints != 1) + goto err; ep = &iface->endpoint[0].desc; - if (!ep || !usb_endpoint_is_int_in(ep)) { - rv = -EINVAL; + if (!ep || !usb_endpoint_is_int_in(ep)) goto err; - } desc->wMaxPacketSize = le16_to_cpu(ep->wMaxPacketSize); desc->bMaxPacketSize0 = udev->descriptor.bMaxPacketSize0; @@ -711,12 +713,19 @@ next_desc: usb_set_intfdata(intf, desc); rv = usb_register_dev(intf, &wdm_class); - dev_info(&intf->dev, "cdc-wdm%d: USB WDM device\n", - intf->minor - WDM_MINOR_BASE); if (rv < 0) - goto err; + goto err3; + else + dev_info(&intf->dev, "cdc-wdm%d: USB WDM device\n", + intf->minor - WDM_MINOR_BASE); out: return rv; +err3: + usb_set_intfdata(intf, NULL); + usb_buffer_free(interface_to_usbdev(desc->intf), + desc->bMaxPacketSize0, + desc->inbuf, + desc->response->transfer_dma); err2: usb_buffer_free(interface_to_usbdev(desc->intf), desc->wMaxPacketSize, -- cgit v1.2.3 From ecf85e481a716cfe07406439fdc7ba9526bbfaeb Mon Sep 17 00:00:00 2001 From: Robert Jarzmik Date: Tue, 21 Apr 2009 20:33:10 -0700 Subject: USB: otg: Fix bug on remove path without transceiver In the case where a gadget driver is removed while no transceiver was found at probe time, a bug in otg_put_transceiver() will trigger. Provide symetric calls for otg_get_transceiver() and otg_put_transceiver(), wherever a transceiver was found or not. Signed-off-by: Robert Jarzmik Acked-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/otg/otg.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/otg/otg.c b/drivers/usb/otg/otg.c index ff318fae7d4..0a43a7db750 100644 --- a/drivers/usb/otg/otg.c +++ b/drivers/usb/otg/otg.c @@ -43,7 +43,8 @@ EXPORT_SYMBOL(otg_get_transceiver); */ void otg_put_transceiver(struct otg_transceiver *x) { - put_device(x->dev); + if (x) + put_device(x->dev); } EXPORT_SYMBOL(otg_put_transceiver); -- cgit v1.2.3 From 6b35ca0d3d586b8ecb8396821af21186e20afaf0 Mon Sep 17 00:00:00 2001 From: Martin Fuzzey Date: Tue, 21 Apr 2009 21:48:09 +0200 Subject: USB: pwc : do not pass stack allocated buffers to USB core. This is causes problems on platforms that have alignment requirements for DMA transfers. Signed-off-by: Martin Fuzzey Acked-by: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman --- drivers/media/video/pwc/pwc-ctrl.c | 238 +++++++++++++++++++++++++------------ 1 file changed, 164 insertions(+), 74 deletions(-) diff --git a/drivers/media/video/pwc/pwc-ctrl.c b/drivers/media/video/pwc/pwc-ctrl.c index f9fbe02e0f6..50b415e07ed 100644 --- a/drivers/media/video/pwc/pwc-ctrl.c +++ b/drivers/media/video/pwc/pwc-ctrl.c @@ -159,35 +159,67 @@ static void pwc_set_image_buffer_size(struct pwc_device *pdev); /****************************************************************************/ +static int _send_control_msg(struct pwc_device *pdev, + u8 request, u16 value, int index, void *buf, int buflen, int timeout) +{ + int rc; + void *kbuf = NULL; + + if (buflen) { + kbuf = kmalloc(buflen, GFP_KERNEL); /* not allowed on stack */ + if (kbuf == NULL) + return -ENOMEM; + memcpy(kbuf, buf, buflen); + } -#define SendControlMsg(request, value, buflen) \ - usb_control_msg(pdev->udev, usb_sndctrlpipe(pdev->udev, 0), \ - request, \ - USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, \ - value, \ - pdev->vcinterface, \ - &buf, buflen, 500) + rc = usb_control_msg(pdev->udev, usb_sndctrlpipe(pdev->udev, 0), + request, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + value, + index, + kbuf, buflen, timeout); -#define RecvControlMsg(request, value, buflen) \ - usb_control_msg(pdev->udev, usb_rcvctrlpipe(pdev->udev, 0), \ - request, \ - USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, \ - value, \ - pdev->vcinterface, \ - &buf, buflen, 500) + kfree(kbuf); + return rc; +} +static int recv_control_msg(struct pwc_device *pdev, + u8 request, u16 value, void *buf, int buflen) +{ + int rc; + void *kbuf = kmalloc(buflen, GFP_KERNEL); /* not allowed on stack */ + + if (kbuf == NULL) + return -ENOMEM; + + rc = usb_control_msg(pdev->udev, usb_rcvctrlpipe(pdev->udev, 0), + request, + USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + value, + pdev->vcinterface, + kbuf, buflen, 500); + memcpy(buf, kbuf, buflen); + kfree(kbuf); + return rc; +} -static int send_video_command(struct usb_device *udev, int index, void *buf, int buflen) +static inline int send_video_command(struct pwc_device *pdev, + int index, void *buf, int buflen) { - return usb_control_msg(udev, - usb_sndctrlpipe(udev, 0), + return _send_control_msg(pdev, SET_EP_STREAM_CTL, - USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, VIDEO_OUTPUT_CONTROL_FORMATTER, index, buf, buflen, 1000); } +static inline int send_control_msg(struct pwc_device *pdev, + u8 request, u16 value, void *buf, int buflen) +{ + return _send_control_msg(pdev, + request, value, pdev->vcinterface, buf, buflen, 500); +} + static int set_video_mode_Nala(struct pwc_device *pdev, int size, int frames) @@ -224,7 +256,7 @@ static int set_video_mode_Nala(struct pwc_device *pdev, int size, int frames) return -EINVAL; memcpy(buf, pEntry->mode, 3); - ret = send_video_command(pdev->udev, pdev->vendpoint, buf, 3); + ret = send_video_command(pdev, pdev->vendpoint, buf, 3); if (ret < 0) { PWC_DEBUG_MODULE("Failed to send video command... %d\n", ret); return ret; @@ -285,7 +317,7 @@ static int set_video_mode_Timon(struct pwc_device *pdev, int size, int frames, i memcpy(buf, pChoose->mode, 13); if (snapshot) buf[0] |= 0x80; - ret = send_video_command(pdev->udev, pdev->vendpoint, buf, 13); + ret = send_video_command(pdev, pdev->vendpoint, buf, 13); if (ret < 0) return ret; @@ -358,7 +390,7 @@ static int set_video_mode_Kiara(struct pwc_device *pdev, int size, int frames, i buf[0] |= 0x80; /* Firmware bug: video endpoint is 5, but commands are sent to endpoint 4 */ - ret = send_video_command(pdev->udev, 4 /* pdev->vendpoint */, buf, 12); + ret = send_video_command(pdev, 4 /* pdev->vendpoint */, buf, 12); if (ret < 0) return ret; @@ -530,7 +562,8 @@ int pwc_get_brightness(struct pwc_device *pdev) char buf; int ret; - ret = RecvControlMsg(GET_LUM_CTL, BRIGHTNESS_FORMATTER, 1); + ret = recv_control_msg(pdev, + GET_LUM_CTL, BRIGHTNESS_FORMATTER, &buf, sizeof(buf)); if (ret < 0) return ret; return buf; @@ -545,7 +578,8 @@ int pwc_set_brightness(struct pwc_device *pdev, int value) if (value > 0xffff) value = 0xffff; buf = (value >> 9) & 0x7f; - return SendControlMsg(SET_LUM_CTL, BRIGHTNESS_FORMATTER, 1); + return send_control_msg(pdev, + SET_LUM_CTL, BRIGHTNESS_FORMATTER, &buf, sizeof(buf)); } /* CONTRAST */ @@ -555,7 +589,8 @@ int pwc_get_contrast(struct pwc_device *pdev) char buf; int ret; - ret = RecvControlMsg(GET_LUM_CTL, CONTRAST_FORMATTER, 1); + ret = recv_control_msg(pdev, + GET_LUM_CTL, CONTRAST_FORMATTER, &buf, sizeof(buf)); if (ret < 0) return ret; return buf; @@ -570,7 +605,8 @@ int pwc_set_contrast(struct pwc_device *pdev, int value) if (value > 0xffff) value = 0xffff; buf = (value >> 10) & 0x3f; - return SendControlMsg(SET_LUM_CTL, CONTRAST_FORMATTER, 1); + return send_control_msg(pdev, + SET_LUM_CTL, CONTRAST_FORMATTER, &buf, sizeof(buf)); } /* GAMMA */ @@ -580,7 +616,8 @@ int pwc_get_gamma(struct pwc_device *pdev) char buf; int ret; - ret = RecvControlMsg(GET_LUM_CTL, GAMMA_FORMATTER, 1); + ret = recv_control_msg(pdev, + GET_LUM_CTL, GAMMA_FORMATTER, &buf, sizeof(buf)); if (ret < 0) return ret; return buf; @@ -595,7 +632,8 @@ int pwc_set_gamma(struct pwc_device *pdev, int value) if (value > 0xffff) value = 0xffff; buf = (value >> 11) & 0x1f; - return SendControlMsg(SET_LUM_CTL, GAMMA_FORMATTER, 1); + return send_control_msg(pdev, + SET_LUM_CTL, GAMMA_FORMATTER, &buf, sizeof(buf)); } @@ -613,7 +651,8 @@ int pwc_get_saturation(struct pwc_device *pdev, int *value) saturation_register = SATURATION_MODE_FORMATTER2; else saturation_register = SATURATION_MODE_FORMATTER1; - ret = RecvControlMsg(GET_CHROM_CTL, saturation_register, 1); + ret = recv_control_msg(pdev, + GET_CHROM_CTL, saturation_register, &buf, sizeof(buf)); if (ret < 0) return ret; *value = (signed)buf; @@ -636,7 +675,8 @@ int pwc_set_saturation(struct pwc_device *pdev, int value) saturation_register = SATURATION_MODE_FORMATTER2; else saturation_register = SATURATION_MODE_FORMATTER1; - return SendControlMsg(SET_CHROM_CTL, saturation_register, 1); + return send_control_msg(pdev, + SET_CHROM_CTL, saturation_register, &buf, sizeof(buf)); } /* AGC */ @@ -651,7 +691,8 @@ int pwc_set_agc(struct pwc_device *pdev, int mode, int value) else buf = 0xff; /* fixed */ - ret = SendControlMsg(SET_LUM_CTL, AGC_MODE_FORMATTER, 1); + ret = send_control_msg(pdev, + SET_LUM_CTL, AGC_MODE_FORMATTER, &buf, sizeof(buf)); if (!mode && ret >= 0) { if (value < 0) @@ -659,7 +700,8 @@ int pwc_set_agc(struct pwc_device *pdev, int mode, int value) if (value > 0xffff) value = 0xffff; buf = (value >> 10) & 0x3F; - ret = SendControlMsg(SET_LUM_CTL, PRESET_AGC_FORMATTER, 1); + ret = send_control_msg(pdev, + SET_LUM_CTL, PRESET_AGC_FORMATTER, &buf, sizeof(buf)); } if (ret < 0) return ret; @@ -671,12 +713,14 @@ int pwc_get_agc(struct pwc_device *pdev, int *value) unsigned char buf; int ret; - ret = RecvControlMsg(GET_LUM_CTL, AGC_MODE_FORMATTER, 1); + ret = recv_control_msg(pdev, + GET_LUM_CTL, AGC_MODE_FORMATTER, &buf, sizeof(buf)); if (ret < 0) return ret; if (buf != 0) { /* fixed */ - ret = RecvControlMsg(GET_LUM_CTL, PRESET_AGC_FORMATTER, 1); + ret = recv_control_msg(pdev, + GET_LUM_CTL, PRESET_AGC_FORMATTER, &buf, sizeof(buf)); if (ret < 0) return ret; if (buf > 0x3F) @@ -684,7 +728,8 @@ int pwc_get_agc(struct pwc_device *pdev, int *value) *value = (buf << 10); } else { /* auto */ - ret = RecvControlMsg(GET_STATUS_CTL, READ_AGC_FORMATTER, 1); + ret = recv_control_msg(pdev, + GET_STATUS_CTL, READ_AGC_FORMATTER, &buf, sizeof(buf)); if (ret < 0) return ret; /* Gah... this value ranges from 0x00 ... 0x9F */ @@ -707,7 +752,8 @@ int pwc_set_shutter_speed(struct pwc_device *pdev, int mode, int value) else buf[0] = 0xff; /* fixed */ - ret = SendControlMsg(SET_LUM_CTL, SHUTTER_MODE_FORMATTER, 1); + ret = send_control_msg(pdev, + SET_LUM_CTL, SHUTTER_MODE_FORMATTER, &buf, sizeof(buf)); if (!mode && ret >= 0) { if (value < 0) @@ -726,7 +772,9 @@ int pwc_set_shutter_speed(struct pwc_device *pdev, int mode, int value) buf[0] = value >> 8; } - ret = SendControlMsg(SET_LUM_CTL, PRESET_SHUTTER_FORMATTER, 2); + ret = send_control_msg(pdev, + SET_LUM_CTL, PRESET_SHUTTER_FORMATTER, + &buf, sizeof(buf)); } return ret; } @@ -737,7 +785,8 @@ int pwc_get_shutter_speed(struct pwc_device *pdev, int *value) unsigned char buf[2]; int ret; - ret = RecvControlMsg(GET_STATUS_CTL, READ_SHUTTER_FORMATTER, 2); + ret = recv_control_msg(pdev, + GET_STATUS_CTL, READ_SHUTTER_FORMATTER, &buf, sizeof(buf)); if (ret < 0) return ret; *value = buf[0] + (buf[1] << 8); @@ -764,7 +813,9 @@ int pwc_camera_power(struct pwc_device *pdev, int power) buf = 0x00; /* active */ else buf = 0xFF; /* power save */ - return SendControlMsg(SET_STATUS_CTL, SET_POWER_SAVE_MODE_FORMATTER, 1); + return send_control_msg(pdev, + SET_STATUS_CTL, SET_POWER_SAVE_MODE_FORMATTER, + &buf, sizeof(buf)); } @@ -773,20 +824,20 @@ int pwc_camera_power(struct pwc_device *pdev, int power) int pwc_restore_user(struct pwc_device *pdev) { - char buf; /* dummy */ - return SendControlMsg(SET_STATUS_CTL, RESTORE_USER_DEFAULTS_FORMATTER, 0); + return send_control_msg(pdev, + SET_STATUS_CTL, RESTORE_USER_DEFAULTS_FORMATTER, NULL, 0); } int pwc_save_user(struct pwc_device *pdev) { - char buf; /* dummy */ - return SendControlMsg(SET_STATUS_CTL, SAVE_USER_DEFAULTS_FORMATTER, 0); + return send_control_msg(pdev, + SET_STATUS_CTL, SAVE_USER_DEFAULTS_FORMATTER, NULL, 0); } int pwc_restore_factory(struct pwc_device *pdev) { - char buf; /* dummy */ - return SendControlMsg(SET_STATUS_CTL, RESTORE_FACTORY_DEFAULTS_FORMATTER, 0); + return send_control_msg(pdev, + SET_STATUS_CTL, RESTORE_FACTORY_DEFAULTS_FORMATTER, NULL, 0); } /* ************************************************* */ @@ -814,7 +865,8 @@ int pwc_set_awb(struct pwc_device *pdev, int mode) buf = mode & 0x07; /* just the lowest three bits */ - ret = SendControlMsg(SET_CHROM_CTL, WB_MODE_FORMATTER, 1); + ret = send_control_msg(pdev, + SET_CHROM_CTL, WB_MODE_FORMATTER, &buf, sizeof(buf)); if (ret < 0) return ret; @@ -826,7 +878,8 @@ int pwc_get_awb(struct pwc_device *pdev) unsigned char buf; int ret; - ret = RecvControlMsg(GET_CHROM_CTL, WB_MODE_FORMATTER, 1); + ret = recv_control_msg(pdev, + GET_CHROM_CTL, WB_MODE_FORMATTER, &buf, sizeof(buf)); if (ret < 0) return ret; @@ -843,7 +896,9 @@ int pwc_set_red_gain(struct pwc_device *pdev, int value) value = 0xffff; /* only the msb is considered */ buf = value >> 8; - return SendControlMsg(SET_CHROM_CTL, PRESET_MANUAL_RED_GAIN_FORMATTER, 1); + return send_control_msg(pdev, + SET_CHROM_CTL, PRESET_MANUAL_RED_GAIN_FORMATTER, + &buf, sizeof(buf)); } int pwc_get_red_gain(struct pwc_device *pdev, int *value) @@ -851,7 +906,9 @@ int pwc_get_red_gain(struct pwc_device *pdev, int *value) unsigned char buf; int ret; - ret = RecvControlMsg(GET_CHROM_CTL, PRESET_MANUAL_RED_GAIN_FORMATTER, 1); + ret = recv_control_msg(pdev, + GET_CHROM_CTL, PRESET_MANUAL_RED_GAIN_FORMATTER, + &buf, sizeof(buf)); if (ret < 0) return ret; *value = buf << 8; @@ -869,7 +926,9 @@ int pwc_set_blue_gain(struct pwc_device *pdev, int value) value = 0xffff; /* only the msb is considered */ buf = value >> 8; - return SendControlMsg(SET_CHROM_CTL, PRESET_MANUAL_BLUE_GAIN_FORMATTER, 1); + return send_control_msg(pdev, + SET_CHROM_CTL, PRESET_MANUAL_BLUE_GAIN_FORMATTER, + &buf, sizeof(buf)); } int pwc_get_blue_gain(struct pwc_device *pdev, int *value) @@ -877,7 +936,9 @@ int pwc_get_blue_gain(struct pwc_device *pdev, int *value) unsigned char buf; int ret; - ret = RecvControlMsg(GET_CHROM_CTL, PRESET_MANUAL_BLUE_GAIN_FORMATTER, 1); + ret = recv_control_msg(pdev, + GET_CHROM_CTL, PRESET_MANUAL_BLUE_GAIN_FORMATTER, + &buf, sizeof(buf)); if (ret < 0) return ret; *value = buf << 8; @@ -894,7 +955,8 @@ static int pwc_read_red_gain(struct pwc_device *pdev, int *value) unsigned char buf; int ret; - ret = RecvControlMsg(GET_STATUS_CTL, READ_RED_GAIN_FORMATTER, 1); + ret = recv_control_msg(pdev, + GET_STATUS_CTL, READ_RED_GAIN_FORMATTER, &buf, sizeof(buf)); if (ret < 0) return ret; *value = buf << 8; @@ -906,7 +968,8 @@ static int pwc_read_blue_gain(struct pwc_device *pdev, int *value) unsigned char buf; int ret; - ret = RecvControlMsg(GET_STATUS_CTL, READ_BLUE_GAIN_FORMATTER, 1); + ret = recv_control_msg(pdev, + GET_STATUS_CTL, READ_BLUE_GAIN_FORMATTER, &buf, sizeof(buf)); if (ret < 0) return ret; *value = buf << 8; @@ -920,7 +983,8 @@ static int pwc_set_wb_speed(struct pwc_device *pdev, int speed) /* useful range is 0x01..0x20 */ buf = speed / 0x7f0; - return SendControlMsg(SET_CHROM_CTL, AWB_CONTROL_SPEED_FORMATTER, 1); + return send_control_msg(pdev, + SET_CHROM_CTL, AWB_CONTROL_SPEED_FORMATTER, &buf, sizeof(buf)); } static int pwc_get_wb_speed(struct pwc_device *pdev, int *value) @@ -928,7 +992,8 @@ static int pwc_get_wb_speed(struct pwc_device *pdev, int *value) unsigned char buf; int ret; - ret = RecvControlMsg(GET_CHROM_CTL, AWB_CONTROL_SPEED_FORMATTER, 1); + ret = recv_control_msg(pdev, + GET_CHROM_CTL, AWB_CONTROL_SPEED_FORMATTER, &buf, sizeof(buf)); if (ret < 0) return ret; *value = buf * 0x7f0; @@ -942,7 +1007,8 @@ static int pwc_set_wb_delay(struct pwc_device *pdev, int delay) /* useful range is 0x01..0x3F */ buf = (delay >> 10); - return SendControlMsg(SET_CHROM_CTL, AWB_CONTROL_DELAY_FORMATTER, 1); + return send_control_msg(pdev, + SET_CHROM_CTL, AWB_CONTROL_DELAY_FORMATTER, &buf, sizeof(buf)); } static int pwc_get_wb_delay(struct pwc_device *pdev, int *value) @@ -950,7 +1016,8 @@ static int pwc_get_wb_delay(struct pwc_device *pdev, int *value) unsigned char buf; int ret; - ret = RecvControlMsg(GET_CHROM_CTL, AWB_CONTROL_DELAY_FORMATTER, 1); + ret = recv_control_msg(pdev, + GET_CHROM_CTL, AWB_CONTROL_DELAY_FORMATTER, &buf, sizeof(buf)); if (ret < 0) return ret; *value = buf << 10; @@ -978,7 +1045,8 @@ int pwc_set_leds(struct pwc_device *pdev, int on_value, int off_value) buf[0] = on_value; buf[1] = off_value; - return SendControlMsg(SET_STATUS_CTL, LED_FORMATTER, 2); + return send_control_msg(pdev, + SET_STATUS_CTL, LED_FORMATTER, &buf, sizeof(buf)); } static int pwc_get_leds(struct pwc_device *pdev, int *on_value, int *off_value) @@ -992,7 +1060,8 @@ static int pwc_get_leds(struct pwc_device *pdev, int *on_value, int *off_value) return 0; } - ret = RecvControlMsg(GET_STATUS_CTL, LED_FORMATTER, 2); + ret = recv_control_msg(pdev, + GET_STATUS_CTL, LED_FORMATTER, &buf, sizeof(buf)); if (ret < 0) return ret; *on_value = buf[0] * 100; @@ -1009,7 +1078,8 @@ int pwc_set_contour(struct pwc_device *pdev, int contour) buf = 0xff; /* auto contour on */ else buf = 0x0; /* auto contour off */ - ret = SendControlMsg(SET_LUM_CTL, AUTO_CONTOUR_FORMATTER, 1); + ret = send_control_msg(pdev, + SET_LUM_CTL, AUTO_CONTOUR_FORMATTER, &buf, sizeof(buf)); if (ret < 0) return ret; @@ -1019,7 +1089,8 @@ int pwc_set_contour(struct pwc_device *pdev, int contour) contour = 0xffff; buf = (contour >> 10); /* contour preset is [0..3f] */ - ret = SendControlMsg(SET_LUM_CTL, PRESET_CONTOUR_FORMATTER, 1); + ret = send_control_msg(pdev, + SET_LUM_CTL, PRESET_CONTOUR_FORMATTER, &buf, sizeof(buf)); if (ret < 0) return ret; return 0; @@ -1030,13 +1101,16 @@ int pwc_get_contour(struct pwc_device *pdev, int *contour) unsigned char buf; int ret; - ret = RecvControlMsg(GET_LUM_CTL, AUTO_CONTOUR_FORMATTER, 1); + ret = recv_control_msg(pdev, + GET_LUM_CTL, AUTO_CONTOUR_FORMATTER, &buf, sizeof(buf)); if (ret < 0) return ret; if (buf == 0) { /* auto mode off, query current preset value */ - ret = RecvControlMsg(GET_LUM_CTL, PRESET_CONTOUR_FORMATTER, 1); + ret = recv_control_msg(pdev, + GET_LUM_CTL, PRESET_CONTOUR_FORMATTER, + &buf, sizeof(buf)); if (ret < 0) return ret; *contour = buf << 10; @@ -1055,7 +1129,9 @@ int pwc_set_backlight(struct pwc_device *pdev, int backlight) buf = 0xff; else buf = 0x0; - return SendControlMsg(SET_LUM_CTL, BACK_LIGHT_COMPENSATION_FORMATTER, 1); + return send_control_msg(pdev, + SET_LUM_CTL, BACK_LIGHT_COMPENSATION_FORMATTER, + &buf, sizeof(buf)); } int pwc_get_backlight(struct pwc_device *pdev, int *backlight) @@ -1063,7 +1139,9 @@ int pwc_get_backlight(struct pwc_device *pdev, int *backlight) int ret; unsigned char buf; - ret = RecvControlMsg(GET_LUM_CTL, BACK_LIGHT_COMPENSATION_FORMATTER, 1); + ret = recv_control_msg(pdev, + GET_LUM_CTL, BACK_LIGHT_COMPENSATION_FORMATTER, + &buf, sizeof(buf)); if (ret < 0) return ret; *backlight = !!buf; @@ -1078,7 +1156,8 @@ int pwc_set_colour_mode(struct pwc_device *pdev, int colour) buf = 0xff; else buf = 0x0; - return SendControlMsg(SET_CHROM_CTL, COLOUR_MODE_FORMATTER, 1); + return send_control_msg(pdev, + SET_CHROM_CTL, COLOUR_MODE_FORMATTER, &buf, sizeof(buf)); } int pwc_get_colour_mode(struct pwc_device *pdev, int *colour) @@ -1086,7 +1165,8 @@ int pwc_get_colour_mode(struct pwc_device *pdev, int *colour) int ret; unsigned char buf; - ret = RecvControlMsg(GET_CHROM_CTL, COLOUR_MODE_FORMATTER, 1); + ret = recv_control_msg(pdev, + GET_CHROM_CTL, COLOUR_MODE_FORMATTER, &buf, sizeof(buf)); if (ret < 0) return ret; *colour = !!buf; @@ -1102,7 +1182,8 @@ int pwc_set_flicker(struct pwc_device *pdev, int flicker) buf = 0xff; else buf = 0x0; - return SendControlMsg(SET_LUM_CTL, FLICKERLESS_MODE_FORMATTER, 1); + return send_control_msg(pdev, + SET_LUM_CTL, FLICKERLESS_MODE_FORMATTER, &buf, sizeof(buf)); } int pwc_get_flicker(struct pwc_device *pdev, int *flicker) @@ -1110,7 +1191,8 @@ int pwc_get_flicker(struct pwc_device *pdev, int *flicker) int ret; unsigned char buf; - ret = RecvControlMsg(GET_LUM_CTL, FLICKERLESS_MODE_FORMATTER, 1); + ret = recv_control_msg(pdev, + GET_LUM_CTL, FLICKERLESS_MODE_FORMATTER, &buf, sizeof(buf)); if (ret < 0) return ret; *flicker = !!buf; @@ -1126,7 +1208,9 @@ int pwc_set_dynamic_noise(struct pwc_device *pdev, int noise) if (noise > 3) noise = 3; buf = noise; - return SendControlMsg(SET_LUM_CTL, DYNAMIC_NOISE_CONTROL_FORMATTER, 1); + return send_control_msg(pdev, + SET_LUM_CTL, DYNAMIC_NOISE_CONTROL_FORMATTER, + &buf, sizeof(buf)); } int pwc_get_dynamic_noise(struct pwc_device *pdev, int *noise) @@ -1134,7 +1218,9 @@ int pwc_get_dynamic_noise(struct pwc_device *pdev, int *noise) int ret; unsigned char buf; - ret = RecvControlMsg(GET_LUM_CTL, DYNAMIC_NOISE_CONTROL_FORMATTER, 1); + ret = recv_control_msg(pdev, + GET_LUM_CTL, DYNAMIC_NOISE_CONTROL_FORMATTER, + &buf, sizeof(buf)); if (ret < 0) return ret; *noise = buf; @@ -1146,7 +1232,8 @@ static int _pwc_mpt_reset(struct pwc_device *pdev, int flags) unsigned char buf; buf = flags & 0x03; // only lower two bits are currently used - return SendControlMsg(SET_MPT_CTL, PT_RESET_CONTROL_FORMATTER, 1); + return send_control_msg(pdev, + SET_MPT_CTL, PT_RESET_CONTROL_FORMATTER, &buf, sizeof(buf)); } int pwc_mpt_reset(struct pwc_device *pdev, int flags) @@ -1175,7 +1262,8 @@ static int _pwc_mpt_set_angle(struct pwc_device *pdev, int pan, int tilt) buf[1] = (pan >> 8) & 0xFF; buf[2] = tilt & 0xFF; buf[3] = (tilt >> 8) & 0xFF; - return SendControlMsg(SET_MPT_CTL, PT_RELATIVE_CONTROL_FORMATTER, 4); + return send_control_msg(pdev, + SET_MPT_CTL, PT_RELATIVE_CONTROL_FORMATTER, &buf, sizeof(buf)); } int pwc_mpt_set_angle(struct pwc_device *pdev, int pan, int tilt) @@ -1211,7 +1299,8 @@ static int pwc_mpt_get_status(struct pwc_device *pdev, struct pwc_mpt_status *st int ret; unsigned char buf[5]; - ret = RecvControlMsg(GET_MPT_CTL, PT_STATUS_FORMATTER, 5); + ret = recv_control_msg(pdev, + GET_MPT_CTL, PT_STATUS_FORMATTER, &buf, sizeof(buf)); if (ret < 0) return ret; status->status = buf[0] & 0x7; // 3 bits are used for reporting @@ -1233,7 +1322,8 @@ int pwc_get_cmos_sensor(struct pwc_device *pdev, int *sensor) else request = SENSOR_TYPE_FORMATTER2; - ret = RecvControlMsg(GET_STATUS_CTL, request, 1); + ret = recv_control_msg(pdev, + GET_STATUS_CTL, request, &buf, sizeof(buf)); if (ret < 0) return ret; if (pdev->type < 675) -- cgit v1.2.3 From ae1036a2f4e8f83b544ddce4f875a1e4e2ac7b62 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Mon, 20 Apr 2009 17:48:28 +0100 Subject: [ARM] 5458/1: pcmcia: pxa2xx-sharpsl: check if we do have Scoop config Check if we really have Scoop config, otherwice we can get a nice Oops during probe. Signed-off-by: Dmitry Eremin-Solenikov Signed-off-by: Russell King --- drivers/pcmcia/pxa2xx_sharpsl.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/pcmcia/pxa2xx_sharpsl.c b/drivers/pcmcia/pxa2xx_sharpsl.c index 1cd02f5a23a..bc43f78f6f0 100644 --- a/drivers/pcmcia/pxa2xx_sharpsl.c +++ b/drivers/pcmcia/pxa2xx_sharpsl.c @@ -255,6 +255,9 @@ static int __init sharpsl_pcmcia_init(void) { int ret; + if (!platform_scoop_config) + return -ENODEV; + sharpsl_pcmcia_ops.nr = platform_scoop_config->num_devs; sharpsl_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1); -- cgit v1.2.3 From fdd8b079e33d4711527ace19798e9db99a056469 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Wed, 22 Apr 2009 20:08:17 +0100 Subject: [ARM] 5460/1: Orion: reduce namespace pollution Symbols like SOFT_RESET are way too generic to be exported at large. To avoid this, let's move the mbus bridge register defines into a separate file and include it where needed. This affects mach-kirkwood, mach-loki, mach-mv78xx0 and mach-orion5x simultaneously as they all share code in plat-orion which relies on those defines. Some other defines have been moved to narrower scopes, or simply deleted when they had no user. This fixes compilation problem with mpt2sas on the above listed platforms. Signed-off-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/mach-kirkwood/common.c | 1 + arch/arm/mach-kirkwood/include/mach/bridge-regs.h | 42 ++++++++++++++ arch/arm/mach-kirkwood/include/mach/debug-macro.S | 2 +- arch/arm/mach-kirkwood/include/mach/entry-macro.S | 2 +- arch/arm/mach-kirkwood/include/mach/kirkwood.h | 53 +++++------------- arch/arm/mach-kirkwood/include/mach/system.h | 3 +- arch/arm/mach-kirkwood/irq.c | 1 + arch/arm/mach-loki/addr-map.c | 1 + arch/arm/mach-loki/include/mach/bridge-regs.h | 33 +++++++++++ arch/arm/mach-loki/include/mach/entry-macro.S | 2 +- arch/arm/mach-loki/include/mach/loki.h | 14 ----- arch/arm/mach-loki/include/mach/system.h | 3 +- arch/arm/mach-loki/irq.c | 1 + arch/arm/mach-mv78xx0/common.c | 1 + arch/arm/mach-mv78xx0/include/mach/bridge-regs.h | 39 +++++++++++++ arch/arm/mach-mv78xx0/include/mach/entry-macro.S | 2 +- arch/arm/mach-mv78xx0/include/mach/mv78xx0.h | 42 ++++---------- arch/arm/mach-mv78xx0/include/mach/system.h | 3 +- arch/arm/mach-mv78xx0/irq.c | 2 +- arch/arm/mach-orion5x/addr-map.c | 2 + arch/arm/mach-orion5x/include/mach/bridge-regs.h | 41 ++++++++++++++ arch/arm/mach-orion5x/include/mach/entry-macro.S | 2 +- arch/arm/mach-orion5x/include/mach/orion5x.h | 68 +++++++---------------- arch/arm/mach-orion5x/include/mach/system.h | 3 +- arch/arm/mach-orion5x/irq.c | 2 +- arch/arm/mach-orion5x/mss2-setup.c | 1 + arch/arm/mach-orion5x/pci.c | 1 + arch/arm/plat-orion/time.c | 2 +- drivers/watchdog/orion5x_wdt.c | 1 + 29 files changed, 223 insertions(+), 147 deletions(-) create mode 100644 arch/arm/mach-kirkwood/include/mach/bridge-regs.h create mode 100644 arch/arm/mach-loki/include/mach/bridge-regs.h create mode 100644 arch/arm/mach-mv78xx0/include/mach/bridge-regs.h create mode 100644 arch/arm/mach-orion5x/include/mach/bridge-regs.h diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index 16dc9ea0839..eeb00240d78 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -23,6 +23,7 @@ #include #include #include +#include #include #include #include diff --git a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h new file mode 100644 index 00000000000..4f7029f521c --- /dev/null +++ b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h @@ -0,0 +1,42 @@ +/* + * arch/arm/mach-kirkwood/include/mach/bridge-regs.h + * + * Mbus-L to Mbus Bridge Registers + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARCH_BRIDGE_REGS_H +#define __ASM_ARCH_BRIDGE_REGS_H + +#include + +#define CPU_CONTROL (BRIDGE_VIRT_BASE | 0x0104) +#define CPU_RESET 0x00000002 + +#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108) +#define SOFT_RESET_OUT_EN 0x00000004 + +#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c) +#define SOFT_RESET 0x00000001 + +#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110) +#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114) +#define BRIDGE_INT_TIMER0 0x0002 +#define BRIDGE_INT_TIMER1 0x0004 +#define BRIDGE_INT_TIMER1_CLR (~0x0004) + +#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200) +#define IRQ_CAUSE_LOW_OFF 0x0000 +#define IRQ_MASK_LOW_OFF 0x0004 +#define IRQ_CAUSE_HIGH_OFF 0x0010 +#define IRQ_MASK_HIGH_OFF 0x0014 + +#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300) + +#define L2_CONFIG_REG (BRIDGE_VIRT_BASE | 0x0128) +#define L2_WRITETHROUGH 0x00000010 + +#endif diff --git a/arch/arm/mach-kirkwood/include/mach/debug-macro.S b/arch/arm/mach-kirkwood/include/mach/debug-macro.S index c0cc5b5c82a..a4a55c199d7 100644 --- a/arch/arm/mach-kirkwood/include/mach/debug-macro.S +++ b/arch/arm/mach-kirkwood/include/mach/debug-macro.S @@ -6,7 +6,7 @@ * published by the Free Software Foundation. */ -#include +#include .macro addruart,rx mrc p15, 0, \rx, c1, c0 diff --git a/arch/arm/mach-kirkwood/include/mach/entry-macro.S b/arch/arm/mach-kirkwood/include/mach/entry-macro.S index 83e0cba77b3..8939d36f893 100644 --- a/arch/arm/mach-kirkwood/include/mach/entry-macro.S +++ b/arch/arm/mach-kirkwood/include/mach/entry-macro.S @@ -8,7 +8,7 @@ * warranty of any kind, whether express or implied. */ -#include +#include .macro disable_fiq .endm diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h index 38c98685359..b3e13958821 100644 --- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h +++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h @@ -43,44 +43,6 @@ #define KIRKWOOD_PCIE_MEM_PHYS_BASE 0xe0000000 #define KIRKWOOD_PCIE_MEM_SIZE SZ_128M -/* - * MBUS bridge registers. - */ -#define BRIDGE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x20000) -#define CPU_CONTROL (BRIDGE_VIRT_BASE | 0x0104) -#define CPU_RESET 0x00000002 -#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108) -#define SOFT_RESET_OUT_EN 0x00000004 -#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c) -#define SOFT_RESET 0x00000001 -#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110) -#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114) -#define BRIDGE_INT_TIMER0 0x0002 -#define BRIDGE_INT_TIMER1 0x0004 -#define BRIDGE_INT_TIMER1_CLR (~0x0004) -#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200) -#define IRQ_CAUSE_LOW_OFF 0x0000 -#define IRQ_MASK_LOW_OFF 0x0004 -#define IRQ_CAUSE_HIGH_OFF 0x0010 -#define IRQ_MASK_HIGH_OFF 0x0014 -#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300) -#define L2_CONFIG_REG (BRIDGE_VIRT_BASE | 0x0128) -#define L2_WRITETHROUGH 0x00000010 - -/* - * Supported devices and revisions. - */ -#define MV88F6281_DEV_ID 0x6281 -#define MV88F6281_REV_Z0 0 -#define MV88F6281_REV_A0 2 - -#define MV88F6192_DEV_ID 0x6192 -#define MV88F6192_REV_Z0 0 -#define MV88F6192_REV_A0 2 - -#define MV88F6180_DEV_ID 0x6180 -#define MV88F6180_REV_A0 2 - /* * Register Map */ @@ -99,6 +61,8 @@ #define UART1_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2100) #define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2100) +#define BRIDGE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x20000) + #define PCIE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x40000) #define USB_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x50000) @@ -119,5 +83,18 @@ #define SDIO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x90000) +/* + * Supported devices and revisions. + */ +#define MV88F6281_DEV_ID 0x6281 +#define MV88F6281_REV_Z0 0 +#define MV88F6281_REV_A0 2 + +#define MV88F6192_DEV_ID 0x6192 +#define MV88F6192_REV_Z0 0 +#define MV88F6192_REV_A0 2 + +#define MV88F6180_DEV_ID 0x6180 +#define MV88F6180_REV_A0 2 #endif diff --git a/arch/arm/mach-kirkwood/include/mach/system.h b/arch/arm/mach-kirkwood/include/mach/system.h index 23a1914c1da..7568e95d279 100644 --- a/arch/arm/mach-kirkwood/include/mach/system.h +++ b/arch/arm/mach-kirkwood/include/mach/system.h @@ -9,8 +9,7 @@ #ifndef __ASM_ARCH_SYSTEM_H #define __ASM_ARCH_SYSTEM_H -#include -#include +#include static inline void arch_idle(void) { diff --git a/arch/arm/mach-kirkwood/irq.c b/arch/arm/mach-kirkwood/irq.c index 06083b23bb4..28020abf49e 100644 --- a/arch/arm/mach-kirkwood/irq.c +++ b/arch/arm/mach-kirkwood/irq.c @@ -12,6 +12,7 @@ #include #include #include +#include #include #include #include "common.h" diff --git a/arch/arm/mach-loki/addr-map.c b/arch/arm/mach-loki/addr-map.c index 0332d8f5c18..b9537c97beb 100644 --- a/arch/arm/mach-loki/addr-map.c +++ b/arch/arm/mach-loki/addr-map.c @@ -38,6 +38,7 @@ /* * CPU Address Decode Windows registers */ +#define BRIDGE_REG(x) (BRIDGE_VIRT_BASE | (x)) #define CPU_WIN_CTRL(n) BRIDGE_REG(0x000 | ((n) << 4)) #define CPU_WIN_BASE(n) BRIDGE_REG(0x004 | ((n) << 4)) #define CPU_WIN_REMAP_LO(n) BRIDGE_REG(0x008 | ((n) << 4)) diff --git a/arch/arm/mach-loki/include/mach/bridge-regs.h b/arch/arm/mach-loki/include/mach/bridge-regs.h new file mode 100644 index 00000000000..a3fabf70044 --- /dev/null +++ b/arch/arm/mach-loki/include/mach/bridge-regs.h @@ -0,0 +1,33 @@ +/* + * arch/arm/mach-loki/include/mach/bridge-regs.h + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARCH_BRIDGE_REGS_H +#define __ASM_ARCH_BRIDGE_REGS_H + +#include + +#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108) +#define SOFT_RESET_OUT_EN 0x00000004 + +#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c) +#define SOFT_RESET 0x00000001 + +#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110) + +#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114) +#define BRIDGE_INT_TIMER0 0x0002 +#define BRIDGE_INT_TIMER1 0x0004 +#define BRIDGE_INT_TIMER1_CLR 0x0004 + +#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200) +#define IRQ_CAUSE_OFF 0x0000 +#define IRQ_MASK_OFF 0x0004 + +#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300) + +#endif diff --git a/arch/arm/mach-loki/include/mach/entry-macro.S b/arch/arm/mach-loki/include/mach/entry-macro.S index 332af38ec13..bc917ed3a62 100644 --- a/arch/arm/mach-loki/include/mach/entry-macro.S +++ b/arch/arm/mach-loki/include/mach/entry-macro.S @@ -8,7 +8,7 @@ * warranty of any kind, whether express or implied. */ -#include +#include .macro disable_fiq .endm diff --git a/arch/arm/mach-loki/include/mach/loki.h b/arch/arm/mach-loki/include/mach/loki.h index c00af6ba557..bfca7c265f4 100644 --- a/arch/arm/mach-loki/include/mach/loki.h +++ b/arch/arm/mach-loki/include/mach/loki.h @@ -58,20 +58,6 @@ #define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2100) #define BRIDGE_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0x20000) -#define BRIDGE_REG(x) (BRIDGE_VIRT_BASE | (x)) -#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108) -#define SOFT_RESET_OUT_EN 0x00000004 -#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c) -#define SOFT_RESET 0x00000001 -#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110) -#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114) -#define BRIDGE_INT_TIMER0 0x0002 -#define BRIDGE_INT_TIMER1 0x0004 -#define BRIDGE_INT_TIMER1_CLR 0x0004 -#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200) -#define IRQ_CAUSE_OFF 0x0000 -#define IRQ_MASK_OFF 0x0004 -#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300) #define PCIE0_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0x30000) diff --git a/arch/arm/mach-loki/include/mach/system.h b/arch/arm/mach-loki/include/mach/system.h index c1de36fe9b3..71895199a53 100644 --- a/arch/arm/mach-loki/include/mach/system.h +++ b/arch/arm/mach-loki/include/mach/system.h @@ -9,8 +9,7 @@ #ifndef __ASM_ARCH_SYSTEM_H #define __ASM_ARCH_SYSTEM_H -#include -#include +#include static inline void arch_idle(void) { diff --git a/arch/arm/mach-loki/irq.c b/arch/arm/mach-loki/irq.c index e1f97338d5b..76b211bfcca 100644 --- a/arch/arm/mach-loki/irq.c +++ b/arch/arm/mach-loki/irq.c @@ -12,6 +12,7 @@ #include #include #include +#include #include #include "common.h" diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c index a575daaa62d..9ba595083da 100644 --- a/arch/arm/mach-mv78xx0/common.c +++ b/arch/arm/mach-mv78xx0/common.c @@ -20,6 +20,7 @@ #include #include #include +#include #include #include #include diff --git a/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h b/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h new file mode 100644 index 00000000000..2d14c4fe294 --- /dev/null +++ b/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h @@ -0,0 +1,39 @@ +/* + * arch/arm/mach-mv78xx0/include/mach/bridge-regs.h + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARCH_BRIDGE_REGS_H +#define __ASM_ARCH_BRIDGE_REGS_H + +#include + +#define CPU_CONTROL (BRIDGE_VIRT_BASE | 0x0104) +#define L2_WRITETHROUGH 0x00020000 + +#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108) +#define SOFT_RESET_OUT_EN 0x00000004 + +#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c) +#define SOFT_RESET 0x00000001 + +#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110) +#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114) +#define BRIDGE_INT_TIMER0 0x0002 +#define BRIDGE_INT_TIMER1 0x0004 +#define BRIDGE_INT_TIMER1_CLR (~0x0004) + +#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200) +#define IRQ_CAUSE_ERR_OFF 0x0000 +#define IRQ_CAUSE_LOW_OFF 0x0004 +#define IRQ_CAUSE_HIGH_OFF 0x0008 +#define IRQ_MASK_ERR_OFF 0x000c +#define IRQ_MASK_LOW_OFF 0x0010 +#define IRQ_MASK_HIGH_OFF 0x0014 + +#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300) + +#endif diff --git a/arch/arm/mach-mv78xx0/include/mach/entry-macro.S b/arch/arm/mach-mv78xx0/include/mach/entry-macro.S index fbfb2693ce6..66ae2d29e77 100644 --- a/arch/arm/mach-mv78xx0/include/mach/entry-macro.S +++ b/arch/arm/mach-mv78xx0/include/mach/entry-macro.S @@ -8,7 +8,7 @@ * warranty of any kind, whether express or implied. */ -#include +#include .macro disable_fiq .endm diff --git a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h index 582cffc733a..d715b92b090 100644 --- a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h +++ b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h @@ -59,37 +59,6 @@ * Core-specific peripheral registers. */ #define BRIDGE_VIRT_BASE (MV78XX0_CORE_REGS_VIRT_BASE) -#define CPU_CONTROL (BRIDGE_VIRT_BASE | 0x0104) -#define L2_WRITETHROUGH 0x00020000 -#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108) -#define SOFT_RESET_OUT_EN 0x00000004 -#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c) -#define SOFT_RESET 0x00000001 -#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110) -#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114) -#define BRIDGE_INT_TIMER0 0x0002 -#define BRIDGE_INT_TIMER1 0x0004 -#define BRIDGE_INT_TIMER1_CLR (~0x0004) -#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200) -#define IRQ_CAUSE_ERR_OFF 0x0000 -#define IRQ_CAUSE_LOW_OFF 0x0004 -#define IRQ_CAUSE_HIGH_OFF 0x0008 -#define IRQ_MASK_ERR_OFF 0x000c -#define IRQ_MASK_LOW_OFF 0x0010 -#define IRQ_MASK_HIGH_OFF 0x0014 -#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300) - -/* - * Supported devices and revisions. - */ -#define MV78X00_Z0_DEV_ID 0x6381 -#define MV78X00_REV_Z0 1 - -#define MV78100_DEV_ID 0x7810 -#define MV78100_REV_A0 1 - -#define MV78200_DEV_ID 0x7820 -#define MV78200_REV_A0 1 /* * Register Map @@ -135,5 +104,16 @@ #define SATA_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0xa0000) +/* + * Supported devices and revisions. + */ +#define MV78X00_Z0_DEV_ID 0x6381 +#define MV78X00_REV_Z0 1 + +#define MV78100_DEV_ID 0x7810 +#define MV78100_REV_A0 1 + +#define MV78200_DEV_ID 0x7820 +#define MV78200_REV_A0 1 #endif diff --git a/arch/arm/mach-mv78xx0/include/mach/system.h b/arch/arm/mach-mv78xx0/include/mach/system.h index 1d6350b22d0..66e7ce4e90b 100644 --- a/arch/arm/mach-mv78xx0/include/mach/system.h +++ b/arch/arm/mach-mv78xx0/include/mach/system.h @@ -9,8 +9,7 @@ #ifndef __ASM_ARCH_SYSTEM_H #define __ASM_ARCH_SYSTEM_H -#include -#include +#include static inline void arch_idle(void) { diff --git a/arch/arm/mach-mv78xx0/irq.c b/arch/arm/mach-mv78xx0/irq.c index 30b7e4bcdbc..f289b0ea7dc 100644 --- a/arch/arm/mach-mv78xx0/irq.c +++ b/arch/arm/mach-mv78xx0/irq.c @@ -13,7 +13,7 @@ #include #include #include -#include +#include #include #include "common.h" diff --git a/arch/arm/mach-orion5x/addr-map.c b/arch/arm/mach-orion5x/addr-map.c index 719957e05d9..c14d1213727 100644 --- a/arch/arm/mach-orion5x/addr-map.c +++ b/arch/arm/mach-orion5x/addr-map.c @@ -57,12 +57,14 @@ /* * Helpers to get DDR bank info */ +#define ORION5X_DDR_REG(x) (ORION5X_DDR_VIRT_BASE | (x)) #define DDR_BASE_CS(n) ORION5X_DDR_REG(0x1500 + ((n) << 3)) #define DDR_SIZE_CS(n) ORION5X_DDR_REG(0x1504 + ((n) << 3)) /* * CPU Address Decode Windows registers */ +#define ORION5X_BRIDGE_REG(x) (ORION5X_BRIDGE_VIRT_BASE | (x)) #define CPU_WIN_CTRL(n) ORION5X_BRIDGE_REG(0x000 | ((n) << 4)) #define CPU_WIN_BASE(n) ORION5X_BRIDGE_REG(0x004 | ((n) << 4)) #define CPU_WIN_REMAP_LO(n) ORION5X_BRIDGE_REG(0x008 | ((n) << 4)) diff --git a/arch/arm/mach-orion5x/include/mach/bridge-regs.h b/arch/arm/mach-orion5x/include/mach/bridge-regs.h new file mode 100644 index 00000000000..be896e59d3e --- /dev/null +++ b/arch/arm/mach-orion5x/include/mach/bridge-regs.h @@ -0,0 +1,41 @@ +/* + * arch/arm/mach-orion5x/include/mach/bridge-regs.h + * + * Orion CPU Bridge Registers + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARCH_BRIDGE_REGS_H +#define __ASM_ARCH_BRIDGE_REGS_H + +#include + +#define CPU_CONF (ORION5X_BRIDGE_VIRT_BASE | 0x100) + +#define CPU_CTRL (ORION5X_BRIDGE_VIRT_BASE | 0x104) + +#define CPU_RESET_MASK (ORION5X_BRIDGE_VIRT_BASE | 0x108) +#define WDT_RESET 0x0002 + +#define CPU_SOFT_RESET (ORION5X_BRIDGE_VIRT_BASE | 0x10c) + +#define POWER_MNG_CTRL_REG (ORION5X_BRIDGE_VIRT_BASE | 0x11C) + +#define BRIDGE_CAUSE (ORION5X_BRIDGE_VIRT_BASE | 0x110) +#define WDT_INT_REQ 0x0008 + +#define BRIDGE_MASK (ORION5X_BRIDGE_VIRT_BASE | 0x114) +#define BRIDGE_INT_TIMER0 0x0002 +#define BRIDGE_INT_TIMER1 0x0004 +#define BRIDGE_INT_TIMER1_CLR (~0x0004) + +#define MAIN_IRQ_CAUSE (ORION5X_BRIDGE_VIRT_BASE | 0x200) + +#define MAIN_IRQ_MASK (ORION5X_BRIDGE_VIRT_BASE | 0x204) + +#define TIMER_VIRT_BASE (ORION5X_BRIDGE_VIRT_BASE | 0x300) + +#endif diff --git a/arch/arm/mach-orion5x/include/mach/entry-macro.S b/arch/arm/mach-orion5x/include/mach/entry-macro.S index 4351937035c..d658992e540 100644 --- a/arch/arm/mach-orion5x/include/mach/entry-macro.S +++ b/arch/arm/mach-orion5x/include/mach/entry-macro.S @@ -8,7 +8,7 @@ * warranty of any kind, whether express or implied. */ -#include +#include .macro disable_fiq .endm diff --git a/arch/arm/mach-orion5x/include/mach/orion5x.h b/arch/arm/mach-orion5x/include/mach/orion5x.h index 67bda31406d..377a773ae53 100644 --- a/arch/arm/mach-orion5x/include/mach/orion5x.h +++ b/arch/arm/mach-orion5x/include/mach/orion5x.h @@ -60,31 +60,11 @@ #define ORION5X_PCI_MEM_PHYS_BASE 0xe8000000 #define ORION5X_PCI_MEM_SIZE SZ_128M -/******************************************************************************* - * Supported Devices & Revisions - ******************************************************************************/ -/* Orion-1 (88F5181) and Orion-VoIP (88F5181L) */ -#define MV88F5181_DEV_ID 0x5181 -#define MV88F5181_REV_B1 3 -#define MV88F5181L_REV_A0 8 -#define MV88F5181L_REV_A1 9 -/* Orion-NAS (88F5182) */ -#define MV88F5182_DEV_ID 0x5182 -#define MV88F5182_REV_A2 2 -/* Orion-2 (88F5281) */ -#define MV88F5281_DEV_ID 0x5281 -#define MV88F5281_REV_D0 4 -#define MV88F5281_REV_D1 5 -#define MV88F5281_REV_D2 6 -/* Orion-1-90 (88F6183) */ -#define MV88F6183_DEV_ID 0x6183 -#define MV88F6183_REV_B0 3 - /******************************************************************************* * Orion Registers Map ******************************************************************************/ + #define ORION5X_DDR_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x00000) -#define ORION5X_DDR_REG(x) (ORION5X_DDR_VIRT_BASE | (x)) #define ORION5X_DEV_BUS_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x10000) #define ORION5X_DEV_BUS_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x10000) @@ -97,34 +77,25 @@ #define UART1_VIRT_BASE (ORION5X_DEV_BUS_VIRT_BASE | 0x2100) #define ORION5X_BRIDGE_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x20000) -#define ORION5X_BRIDGE_REG(x) (ORION5X_BRIDGE_VIRT_BASE | (x)) -#define TIMER_VIRT_BASE (ORION5X_BRIDGE_VIRT_BASE | 0x300) #define ORION5X_PCI_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x30000) -#define ORION5X_PCI_REG(x) (ORION5X_PCI_VIRT_BASE | (x)) #define ORION5X_PCIE_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x40000) -#define ORION5X_PCIE_REG(x) (ORION5X_PCIE_VIRT_BASE | (x)) #define ORION5X_USB0_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x50000) #define ORION5X_USB0_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x50000) -#define ORION5X_USB0_REG(x) (ORION5X_USB0_VIRT_BASE | (x)) #define ORION5X_XOR_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x60900) #define ORION5X_XOR_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x60900) -#define ORION5X_XOR_REG(x) (ORION5X_XOR_VIRT_BASE | (x)) #define ORION5X_ETH_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x70000) #define ORION5X_ETH_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x70000) -#define ORION5X_ETH_REG(x) (ORION5X_ETH_VIRT_BASE | (x)) #define ORION5X_SATA_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x80000) #define ORION5X_SATA_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x80000) -#define ORION5X_SATA_REG(x) (ORION5X_SATA_VIRT_BASE | (x)) #define ORION5X_USB1_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0xa0000) #define ORION5X_USB1_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0xa0000) -#define ORION5X_USB1_REG(x) (ORION5X_USB1_VIRT_BASE | (x)) /******************************************************************************* * Device Bus Registers @@ -142,23 +113,24 @@ #define DEV_BUS_INT_CAUSE ORION5X_DEV_BUS_REG(0x4d0) #define DEV_BUS_INT_MASK ORION5X_DEV_BUS_REG(0x4d4) -/*************************************************************************** - * Orion CPU Bridge Registers - **************************************************************************/ -#define CPU_CONF ORION5X_BRIDGE_REG(0x100) -#define CPU_CTRL ORION5X_BRIDGE_REG(0x104) -#define CPU_RESET_MASK ORION5X_BRIDGE_REG(0x108) -#define WDT_RESET 0x0002 -#define CPU_SOFT_RESET ORION5X_BRIDGE_REG(0x10c) -#define POWER_MNG_CTRL_REG ORION5X_BRIDGE_REG(0x11C) -#define BRIDGE_CAUSE ORION5X_BRIDGE_REG(0x110) -#define WDT_INT_REQ 0x0008 -#define BRIDGE_MASK ORION5X_BRIDGE_REG(0x114) -#define BRIDGE_INT_TIMER0 0x0002 -#define BRIDGE_INT_TIMER1 0x0004 -#define BRIDGE_INT_TIMER1_CLR (~0x0004) -#define MAIN_IRQ_CAUSE ORION5X_BRIDGE_REG(0x200) -#define MAIN_IRQ_MASK ORION5X_BRIDGE_REG(0x204) - +/******************************************************************************* + * Supported Devices & Revisions + ******************************************************************************/ +/* Orion-1 (88F5181) and Orion-VoIP (88F5181L) */ +#define MV88F5181_DEV_ID 0x5181 +#define MV88F5181_REV_B1 3 +#define MV88F5181L_REV_A0 8 +#define MV88F5181L_REV_A1 9 +/* Orion-NAS (88F5182) */ +#define MV88F5182_DEV_ID 0x5182 +#define MV88F5182_REV_A2 2 +/* Orion-2 (88F5281) */ +#define MV88F5281_DEV_ID 0x5281 +#define MV88F5281_REV_D0 4 +#define MV88F5281_REV_D1 5 +#define MV88F5281_REV_D2 6 +/* Orion-1-90 (88F6183) */ +#define MV88F6183_DEV_ID 0x6183 +#define MV88F6183_REV_B0 3 #endif diff --git a/arch/arm/mach-orion5x/include/mach/system.h b/arch/arm/mach-orion5x/include/mach/system.h index 9b8db1dcfa8..e912490fff2 100644 --- a/arch/arm/mach-orion5x/include/mach/system.h +++ b/arch/arm/mach-orion5x/include/mach/system.h @@ -11,8 +11,7 @@ #ifndef __ASM_ARCH_SYSTEM_H #define __ASM_ARCH_SYSTEM_H -#include -#include +#include static inline void arch_idle(void) { diff --git a/arch/arm/mach-orion5x/irq.c b/arch/arm/mach-orion5x/irq.c index e03f7b45cb0..d7512b925a8 100644 --- a/arch/arm/mach-orion5x/irq.c +++ b/arch/arm/mach-orion5x/irq.c @@ -15,7 +15,7 @@ #include #include #include -#include +#include #include #include "common.h" diff --git a/arch/arm/mach-orion5x/mss2-setup.c b/arch/arm/mach-orion5x/mss2-setup.c index 68acca98e63..41e6d5033d5 100644 --- a/arch/arm/mach-orion5x/mss2-setup.c +++ b/arch/arm/mach-orion5x/mss2-setup.c @@ -26,6 +26,7 @@ #include #include #include +#include #include "common.h" #include "mpp.h" diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c index d0a785a3b88..36dc5413cc9 100644 --- a/arch/arm/mach-orion5x/pci.c +++ b/arch/arm/mach-orion5x/pci.c @@ -196,6 +196,7 @@ static int __init pcie_setup(struct pci_sys_data *sys) /***************************************************************************** * PCI controller ****************************************************************************/ +#define ORION5X_PCI_REG(x) (ORION5X_PCI_VIRT_BASE | (x)) #define PCI_MODE ORION5X_PCI_REG(0xd00) #define PCI_CMD ORION5X_PCI_REG(0xc00) #define PCI_P2P_CONF ORION5X_PCI_REG(0x1d14) diff --git a/arch/arm/plat-orion/time.c b/arch/arm/plat-orion/time.c index 6fa2923e6dc..bdeb166b4b2 100644 --- a/arch/arm/plat-orion/time.c +++ b/arch/arm/plat-orion/time.c @@ -16,7 +16,7 @@ #include #include #include -#include +#include /* * Number of timer ticks per jiffy. diff --git a/drivers/watchdog/orion5x_wdt.c b/drivers/watchdog/orion5x_wdt.c index 7529616739d..2cde568e4fb 100644 --- a/drivers/watchdog/orion5x_wdt.c +++ b/drivers/watchdog/orion5x_wdt.c @@ -22,6 +22,7 @@ #include #include #include +#include #include /* -- cgit v1.2.3 From f461ddea0af8b98e2b7940eba9c693b0ee44d64a Mon Sep 17 00:00:00 2001 From: Len Brown Date: Thu, 23 Apr 2009 18:59:43 -0400 Subject: ACPI/hpet: prevent boot hang when hpet=force used on ICH-4M Linux tells ICH4 users that they can (manually) invoke "hpet=force" to enable the undocumented ICH-4M HPET. The HPET becomes available for both clocksource and clockevents. But as of ff69f2bba67bd45514923aaedbf40fe351787c59 (acpi: fix of pmtimer overflow that make Cx states time incorrect) the HPET may be used via clocksource for idle accounting, and hpet=force on an ICH4 box hangs boot. It turns out that touching the MMIO HPET withing the ARB_DIS part of C3 will hang the hardware. The fix is to simply move the timer access outside the ARB_DIS region. This is a no-op on modern hardware because ARB_DIS is no longer used. http://bugzilla.kernel.org/show_bug.cgi?id=13087 Acked-by: Venkatesh Pallipadi Signed-off-by: Len Brown --- drivers/acpi/processor_idle.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index 6fe121434ff..ea23c64bd76 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -955,6 +955,7 @@ static int acpi_idle_enter_bm(struct cpuidle_device *dev, */ acpi_state_timer_broadcast(pr, cx, 1); + kt1 = ktime_get_real(); /* * disable bus master * bm_check implies we need ARB_DIS @@ -976,10 +977,7 @@ static int acpi_idle_enter_bm(struct cpuidle_device *dev, ACPI_FLUSH_CPU_CACHE(); } - kt1 = ktime_get_real(); acpi_idle_do_entry(cx); - kt2 = ktime_get_real(); - idle_time = ktime_to_us(ktime_sub(kt2, kt1)); /* Re-enable bus master arbitration */ if (pr->flags.bm_check && pr->flags.bm_control) { @@ -988,6 +986,8 @@ static int acpi_idle_enter_bm(struct cpuidle_device *dev, c3_cpu_count--; spin_unlock(&c3_lock); } + kt2 = ktime_get_real(); + idle_time = ktime_to_us(ktime_sub(kt2, kt1)); #if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86) /* TSC could halt in idle, so notify users */ -- cgit v1.2.3 From 615dfd93e2346b604232b559e7ea0835d24abe26 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Thu, 23 Apr 2009 23:21:29 -0400 Subject: ACPI: prevent processor.max_cstate=0 boot crash As processor.max_cstate is an init-time-only modparam, sanity checking it at init-time is sufficient. http://bugzilla.kernel.org/show_bug.cgi?id=13142 Signed-off-by: Len Brown --- drivers/acpi/processor_idle.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index 6fe121434ff..436127e0eec 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -1037,6 +1037,9 @@ static int acpi_processor_setup_cpuidle(struct acpi_processor *pr) dev->states[i].desc[0] = '\0'; } + if (max_cstate == 0) + max_cstate = 1; + for (i = 1; i < ACPI_PROCESSOR_MAX_POWER && i <= max_cstate; i++) { cx = &pr->power.states[i]; state = &dev->states[count]; -- cgit v1.2.3 From 226fced325e2865369cbeac41c6a97536d4daa1b Mon Sep 17 00:00:00 2001 From: "Almer S. Tigelaar" Date: Sun, 12 Apr 2009 11:26:26 +0000 Subject: sony-laptop: Duplicate SNC 127 Event Fix Fixes a duplicate mapping in the SNC sony_127_events structure. Signed-off-by: Almer S. Tigelaar Signed-off-by: Mattia Dongili Signed-off-by: Len Brown --- drivers/platform/x86/sony-laptop.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/platform/x86/sony-laptop.c b/drivers/platform/x86/sony-laptop.c index d3c92d777bd..87080d09bea 100644 --- a/drivers/platform/x86/sony-laptop.c +++ b/drivers/platform/x86/sony-laptop.c @@ -905,7 +905,6 @@ static struct sony_nc_event sony_127_events[] = { { 0x05, SONYPI_EVENT_ANYBUTTON_RELEASED }, { 0x86, SONYPI_EVENT_PKEY_P5 }, { 0x06, SONYPI_EVENT_ANYBUTTON_RELEASED }, - { 0x06, SONYPI_EVENT_ANYBUTTON_RELEASED }, { 0x87, SONYPI_EVENT_SETTINGKEY_PRESSED }, { 0x07, SONYPI_EVENT_ANYBUTTON_RELEASED }, { 0, 0 }, -- cgit v1.2.3 From 560e84ac1b92d2a704fbfda29b46ad1b0a8d457e Mon Sep 17 00:00:00 2001 From: "Almer S. Tigelaar" Date: Sun, 12 Apr 2009 11:26:27 +0000 Subject: sony-laptop: SNC 127 Initialization Fix Fixes additional special key initialization for SNC 127 key events. Verified / tested on a Sony VAIO SR model. Signed-off-by: Almer S. Tigelaar Signed-off-by: Mattia Dongili Signed-off-by: Len Brown --- drivers/platform/x86/sony-laptop.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/platform/x86/sony-laptop.c b/drivers/platform/x86/sony-laptop.c index 87080d09bea..4ff41a7a97d 100644 --- a/drivers/platform/x86/sony-laptop.c +++ b/drivers/platform/x86/sony-laptop.c @@ -1003,6 +1003,7 @@ static int sony_nc_function_setup(struct acpi_device *device) sony_call_snc_handle(0x0100, 0, &result); sony_call_snc_handle(0x0101, 0, &result); sony_call_snc_handle(0x0102, 0x100, &result); + sony_call_snc_handle(0x0127, 0, &result); return 0; } -- cgit v1.2.3 From a83021a229016f93b4e532d9cef21b01be5a8bb7 Mon Sep 17 00:00:00 2001 From: "Almer S. Tigelaar" Date: Sun, 12 Apr 2009 11:26:28 +0000 Subject: sony-laptop: SNC input event 38 fix Fixes the "unknown input event 38" messages. ANYBUTTON_RELEASED is now treated the same way as FN_KEY_RELEASED. Signed-off-by: Almer S. Tigelaar Signed-off-by: Mattia Dongili Signed-off-by: Len Brown --- drivers/platform/x86/sony-laptop.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/platform/x86/sony-laptop.c b/drivers/platform/x86/sony-laptop.c index 4ff41a7a97d..3541ca097d0 100644 --- a/drivers/platform/x86/sony-laptop.c +++ b/drivers/platform/x86/sony-laptop.c @@ -317,7 +317,8 @@ static void sony_laptop_report_input_event(u8 event) struct input_dev *key_dev = sony_laptop_input.key_dev; struct sony_laptop_keypress kp = { NULL }; - if (event == SONYPI_EVENT_FNKEY_RELEASED) { + if (event == SONYPI_EVENT_FNKEY_RELEASED || + event == SONYPI_EVENT_ANYBUTTON_RELEASED) { /* Nothing, not all VAIOs generate this event */ return; } -- cgit v1.2.3 From 5aa63f038f042fd1acd6e720a95df72857db0bc7 Mon Sep 17 00:00:00 2001 From: "Almer S. Tigelaar" Date: Sun, 12 Apr 2009 11:26:29 +0000 Subject: ACPI: EC: Fix ACPI EC resume non-query interrupt message When resuming from standby (on a laptop) I see the following message in my kernel.log: "ACPI: EC: non-query interrupt received, switching to interrupt mode" This apparently prevented sony-laptop to properly restore the brightness level on resume. The cause: In drivers/acpi/ec.c the acpi_ec_suspend function clears the GPE mode bit, but this is not restored in acpi_ec_resume (the function below it). The patch below fixes this by properly restoring the GPE_MODE bit. Tested and confirmed to work. Signed-off-by: Almer S. Tigelaar Signed-off-by: Mattia Dongili Acked-by: Alexey Starikovskiy Signed-off-by: Len Brown --- drivers/acpi/ec.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index 04e90443eff..391f331674c 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -1065,6 +1065,7 @@ static int acpi_ec_resume(struct acpi_device *device) struct acpi_ec *ec = acpi_driver_data(device); /* Enable use of GPE back */ clear_bit(EC_FLAGS_NO_GPE, &ec->flags); + set_bit(EC_FLAGS_GPE_MODE, &ec->flags); acpi_enable_gpe(NULL, ec->gpe); return 0; } -- cgit v1.2.3 From c35d4b3532ed3e2076fb14c25385cf6cef41cc69 Mon Sep 17 00:00:00 2001 From: Mattia Dongili Date: Sun, 12 Apr 2009 11:26:30 +0000 Subject: sony-laptop: fix bogus error message display on resume sony_backlight_update_status returns 0 on success -1 on failure (i.e.: the return value from acpi_callsetfunc. The return value in the resume path was broken and thus always displaying a bogus warning about not being able to restore the brightness level. Signed-off-by: Mattia Dongili Signed-off-by: Len Brown --- drivers/platform/x86/sony-laptop.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/platform/x86/sony-laptop.c b/drivers/platform/x86/sony-laptop.c index 3541ca097d0..d93cff656c9 100644 --- a/drivers/platform/x86/sony-laptop.c +++ b/drivers/platform/x86/sony-laptop.c @@ -1041,7 +1041,7 @@ static int sony_nc_resume(struct acpi_device *device) /* set the last requested brightness level */ if (sony_backlight_device && - !sony_backlight_update_status(sony_backlight_device)) + sony_backlight_update_status(sony_backlight_device) < 0) printk(KERN_WARNING DRV_PFX "unable to restore brightness level\n"); return 0; -- cgit v1.2.3 From 53005a0a1b53bda5810c45efe3025d1884aa6bb3 Mon Sep 17 00:00:00 2001 From: Mattia Dongili Date: Sun, 12 Apr 2009 11:26:31 +0000 Subject: sony-laptop: always try to unblock rfkill on load This fixes an inconsistent behaviour when loading the driver with the switch on or off. In the former case you would also need to soft unblock the switch via the sysfs file entries to really disable rfkill, in the latter you wouldn't. Signed-off-by: Mattia Dongili Cc: Matthias Welwarsky Acked-by: Matthew Garrett Signed-off-by: Len Brown --- drivers/platform/x86/sony-laptop.c | 20 ++++++++++++++++---- 1 file changed, 16 insertions(+), 4 deletions(-) diff --git a/drivers/platform/x86/sony-laptop.c b/drivers/platform/x86/sony-laptop.c index d93cff656c9..552958545f9 100644 --- a/drivers/platform/x86/sony-laptop.c +++ b/drivers/platform/x86/sony-laptop.c @@ -1103,8 +1103,11 @@ static int sony_nc_setup_wifi_rfkill(struct acpi_device *device) err = rfkill_register(sony_wifi_rfkill); if (err) rfkill_free(sony_wifi_rfkill); - else + else { sony_rfkill_devices[SONY_WIFI] = sony_wifi_rfkill; + sony_nc_rfkill_set(sony_wifi_rfkill->data, + RFKILL_STATE_UNBLOCKED); + } return err; } @@ -1125,8 +1128,11 @@ static int sony_nc_setup_bluetooth_rfkill(struct acpi_device *device) err = rfkill_register(sony_bluetooth_rfkill); if (err) rfkill_free(sony_bluetooth_rfkill); - else + else { sony_rfkill_devices[SONY_BLUETOOTH] = sony_bluetooth_rfkill; + sony_nc_rfkill_set(sony_bluetooth_rfkill->data, + RFKILL_STATE_UNBLOCKED); + } return err; } @@ -1146,8 +1152,11 @@ static int sony_nc_setup_wwan_rfkill(struct acpi_device *device) err = rfkill_register(sony_wwan_rfkill); if (err) rfkill_free(sony_wwan_rfkill); - else + else { sony_rfkill_devices[SONY_WWAN] = sony_wwan_rfkill; + sony_nc_rfkill_set(sony_wwan_rfkill->data, + RFKILL_STATE_UNBLOCKED); + } return err; } @@ -1167,8 +1176,11 @@ static int sony_nc_setup_wimax_rfkill(struct acpi_device *device) err = rfkill_register(sony_wimax_rfkill); if (err) rfkill_free(sony_wimax_rfkill); - else + else { sony_rfkill_devices[SONY_WIMAX] = sony_wimax_rfkill; + sony_nc_rfkill_set(sony_wimax_rfkill->data, + RFKILL_STATE_UNBLOCKED); + } return err; } -- cgit v1.2.3 From a65131e942e25c707a652fa4ec2cfcd8b63fec11 Mon Sep 17 00:00:00 2001 From: Lin Ming Date: Thu, 16 Apr 2009 15:18:16 +0800 Subject: I/O port protection: update for windows compatibility. For windows compatibility, 1) On a port protection violation, simply ignore the request and do not return an exception (allow the control method to continue execution.) 2) If only part of the request overlaps a protected port, read/write the individual ports that are not protected. http://bugzilla.kernel.org/show_bug.cgi?id=13036 Signed-off-by: Lin Ming Signed-off-by: Bob Moore Signed-off-by: Len Brown --- drivers/acpi/acpica/hwvalid.c | 85 ++++++++++++++++++++++++++++++++++++------- 1 file changed, 71 insertions(+), 14 deletions(-) diff --git a/drivers/acpi/acpica/hwvalid.c b/drivers/acpi/acpica/hwvalid.c index 7737afb157c..9c8345754f6 100644 --- a/drivers/acpi/acpica/hwvalid.c +++ b/drivers/acpi/acpica/hwvalid.c @@ -151,7 +151,7 @@ acpi_hw_validate_io_request(acpi_io_address address, u32 bit_width) ACPI_ERROR((AE_INFO, "Illegal I/O port address/length above 64K: 0x%p/%X", ACPI_CAST_PTR(void, address), byte_width)); - return_ACPI_STATUS(AE_AML_ILLEGAL_ADDRESS); + return_ACPI_STATUS(AE_LIMIT); } /* Exit if requested address is not within the protected port table */ @@ -178,11 +178,12 @@ acpi_hw_validate_io_request(acpi_io_address address, u32 bit_width) /* Port illegality may depend on the _OSI calls made by the BIOS */ if (acpi_gbl_osi_data >= port_info->osi_dependency) { - ACPI_ERROR((AE_INFO, - "Denied AML access to port 0x%p/%X (%s 0x%.4X-0x%.4X)", - ACPI_CAST_PTR(void, address), - byte_width, port_info->name, - port_info->start, port_info->end)); + ACPI_DEBUG_PRINT((ACPI_DB_IO, + "Denied AML access to port 0x%p/%X (%s 0x%.4X-0x%.4X)", + ACPI_CAST_PTR(void, address), + byte_width, port_info->name, + port_info->start, + port_info->end)); return_ACPI_STATUS(AE_AML_ILLEGAL_ADDRESS); } @@ -206,7 +207,7 @@ acpi_hw_validate_io_request(acpi_io_address address, u32 bit_width) * Value Where value is placed * Width Number of bits * - * RETURN: Value read from port + * RETURN: Status and value read from port * * DESCRIPTION: Read data from an I/O port or register. This is a front-end * to acpi_os_read_port that performs validation on both the port @@ -217,14 +218,43 @@ acpi_hw_validate_io_request(acpi_io_address address, u32 bit_width) acpi_status acpi_hw_read_port(acpi_io_address address, u32 *value, u32 width) { acpi_status status; + u32 one_byte; + u32 i; + + /* Validate the entire request and perform the I/O */ status = acpi_hw_validate_io_request(address, width); - if (ACPI_FAILURE(status)) { + if (ACPI_SUCCESS(status)) { + status = acpi_os_read_port(address, value, width); return status; } - status = acpi_os_read_port(address, value, width); - return status; + if (status != AE_AML_ILLEGAL_ADDRESS) { + return status; + } + + /* + * There has been a protection violation within the request. Fall + * back to byte granularity port I/O and ignore the failing bytes. + * This provides Windows compatibility. + */ + for (i = 0, *value = 0; i < width; i += 8) { + + /* Validate and read one byte */ + + if (acpi_hw_validate_io_request(address, 8) == AE_OK) { + status = acpi_os_read_port(address, &one_byte, 8); + if (ACPI_FAILURE(status)) { + return status; + } + + *value |= (one_byte << i); + } + + address++; + } + + return AE_OK; } /****************************************************************************** @@ -235,7 +265,7 @@ acpi_status acpi_hw_read_port(acpi_io_address address, u32 *value, u32 width) * Value Value to write * Width Number of bits * - * RETURN: None + * RETURN: Status * * DESCRIPTION: Write data to an I/O port or register. This is a front-end * to acpi_os_write_port that performs validation on both the port @@ -246,12 +276,39 @@ acpi_status acpi_hw_read_port(acpi_io_address address, u32 *value, u32 width) acpi_status acpi_hw_write_port(acpi_io_address address, u32 value, u32 width) { acpi_status status; + u32 i; + + /* Validate the entire request and perform the I/O */ status = acpi_hw_validate_io_request(address, width); - if (ACPI_FAILURE(status)) { + if (ACPI_SUCCESS(status)) { + status = acpi_os_write_port(address, value, width); return status; } - status = acpi_os_write_port(address, value, width); - return status; + if (status != AE_AML_ILLEGAL_ADDRESS) { + return status; + } + + /* + * There has been a protection violation within the request. Fall + * back to byte granularity port I/O and ignore the failing bytes. + * This provides Windows compatibility. + */ + for (i = 0; i < width; i += 8) { + + /* Validate and write one byte */ + + if (acpi_hw_validate_io_request(address, 8) == AE_OK) { + status = + acpi_os_write_port(address, (value >> i) & 0xFF, 8); + if (ACPI_FAILURE(status)) { + return status; + } + } + + address++; + } + + return AE_OK; } -- cgit v1.2.3 From a38d75fa2e48d4960b656eac39bc8a6b584a83c0 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Fri, 24 Apr 2009 00:32:52 -0400 Subject: Revert "ACPICA: delete check for AML access to port 0x81-83" This reverts commit fdbdc7fc79c02ae4ede869d514179a2c65633d28. That temporary quick-fix is no longer necessary, as the previous patch, a65131e942e25c707a652fa4ec2cfcd8b63fec11, "I/O port protection: update for windows compatibility" should handle this issue for all ports, including this one. Signed-off-by: Len Brown --- drivers/acpi/acpica/hwvalid.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/acpi/acpica/hwvalid.c b/drivers/acpi/acpica/hwvalid.c index 9c8345754f6..ec33f270c5b 100644 --- a/drivers/acpi/acpica/hwvalid.c +++ b/drivers/acpi/acpica/hwvalid.c @@ -90,6 +90,7 @@ static const struct acpi_port_info acpi_protected_ports[] = { {"PIT2", 0x0048, 0x004B, ACPI_OSI_WIN_XP}, {"RTC", 0x0070, 0x0071, ACPI_OSI_WIN_XP}, {"CMOS", 0x0074, 0x0076, ACPI_OSI_WIN_XP}, + {"DMA1", 0x0081, 0x0083, ACPI_OSI_WIN_XP}, {"DMA1L", 0x0087, 0x0087, ACPI_OSI_WIN_XP}, {"DMA2", 0x0089, 0x008B, ACPI_OSI_WIN_XP}, {"DMA2L", 0x008F, 0x008F, ACPI_OSI_WIN_XP}, -- cgit v1.2.3 From b7f0ab460f772b09a9c664d746236a280fec714c Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Wed, 15 Apr 2009 21:46:36 +0100 Subject: ACPI, i915: Register ACPI video even when not modesetting The ACPI video driver defers registration to the i915 driver if the system supports opregion-mediated backlight control. This registration was only being performed in the KMS case. Ensure it's done even if we don't have modesetting enabled. http://bugzilla.kernel.org/show_bug.cgi?id=13048 Signed-off-by: Matthew Garrett Signed-off-by: Len Brown --- drivers/gpu/drm/i915/i915_opregion.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_opregion.c b/drivers/gpu/drm/i915/i915_opregion.c index 69427722d20..8dc1fd3115c 100644 --- a/drivers/gpu/drm/i915/i915_opregion.c +++ b/drivers/gpu/drm/i915/i915_opregion.c @@ -370,11 +370,8 @@ int intel_opregion_init(struct drm_device *dev, int resume) if (mboxes & MBOX_ACPI) { DRM_DEBUG("Public ACPI methods supported\n"); opregion->acpi = base + OPREGION_ACPI_OFFSET; - if (drm_core_check_feature(dev, DRIVER_MODESET)) { + if (drm_core_check_feature(dev, DRIVER_MODESET)) intel_didl_outputs(dev); - if (!resume) - acpi_video_register(); - } } else { DRM_DEBUG("Public ACPI methods not supported\n"); err = -ENOTSUPP; @@ -391,6 +388,10 @@ int intel_opregion_init(struct drm_device *dev, int resume) opregion->asle = base + OPREGION_ASLE_OFFSET; } + if (!resume) + acpi_video_register(); + + /* Notify BIOS we are ready to handle ACPI video ext notifs. * Right now, all the events are handled by the ACPI video module. * We don't actually need to do anything with them. */ -- cgit v1.2.3 From 3e98f9f15e916c48dfc5231d7e6a59be7f122764 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 24 Apr 2009 15:39:39 +0900 Subject: sh: pci: Fix up the build for CONFIG_PCI=n. Signed-off-by: Paul Mundt --- arch/sh/include/asm/pci.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/sh/include/asm/pci.h b/arch/sh/include/asm/pci.h index f910121559b..5b2e0fcdfc2 100644 --- a/arch/sh/include/asm/pci.h +++ b/arch/sh/include/asm/pci.h @@ -88,6 +88,7 @@ static inline void pcibios_penalize_isa_irq(int irq, int active) #define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0) #endif +#ifdef CONFIG_PCI static inline void pci_dma_burst_advice(struct pci_dev *pdev, enum pci_dma_burst_strategy *strat, unsigned long *strategy_parameter) @@ -95,6 +96,7 @@ static inline void pci_dma_burst_advice(struct pci_dev *pdev, *strat = PCI_DMA_BURST_INFINITY; *strategy_parameter = ~0UL; } +#endif #ifdef CONFIG_SUPERH32 /* -- cgit v1.2.3 From 097102c2d04974bdfcfa16a5f3062d499842139c Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Tue, 21 Apr 2009 09:33:14 +0200 Subject: pktcdvd.h should include mempool.h Fix this build error: In file included from fs/compat_ioctl.c:104: include/linux/pktcdvd.h:285: error: expected specifier-qualifier-list before 'mempool_t' Signed-off-by: Alexander Beregalov Signed-off-by: Jens Axboe --- include/linux/pktcdvd.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/pktcdvd.h b/include/linux/pktcdvd.h index 04b4d7330e6..d745f5b6c7b 100644 --- a/include/linux/pktcdvd.h +++ b/include/linux/pktcdvd.h @@ -113,6 +113,7 @@ struct pkt_ctrl_command { #include #include #include +#include /* default bio write queue congestion marks */ #define PKT_WRITE_CONGESTION_ON 10000 -- cgit v1.2.3 From 42dad7647aec49b3ad20dd0cb832b232a6ae514f Mon Sep 17 00:00:00 2001 From: Jerome Marchand Date: Wed, 22 Apr 2009 14:01:49 +0200 Subject: block: simplify I/O stat accounting This simplifies I/O stat accounting switching code and separates it completely from I/O scheduler switch code. Requests are accounted according to the state of their request queue at the time of the request allocation. There is no need anymore to flush the request queue when switching I/O accounting state. Signed-off-by: Jerome Marchand Signed-off-by: Jens Axboe --- block/blk-core.c | 6 ++++-- block/blk-merge.c | 5 ++++- block/blk-sysfs.c | 4 ---- block/blk.h | 7 +------ include/linux/blkdev.h | 3 +++ 5 files changed, 12 insertions(+), 13 deletions(-) diff --git a/block/blk-core.c b/block/blk-core.c index 07ab75403e1..2998fe3a237 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -643,7 +643,7 @@ static inline void blk_free_request(struct request_queue *q, struct request *rq) } static struct request * -blk_alloc_request(struct request_queue *q, int rw, int priv, gfp_t gfp_mask) +blk_alloc_request(struct request_queue *q, int flags, int priv, gfp_t gfp_mask) { struct request *rq = mempool_alloc(q->rq.rq_pool, gfp_mask); @@ -652,7 +652,7 @@ blk_alloc_request(struct request_queue *q, int rw, int priv, gfp_t gfp_mask) blk_rq_init(q, rq); - rq->cmd_flags = rw | REQ_ALLOCED; + rq->cmd_flags = flags | REQ_ALLOCED; if (priv) { if (unlikely(elv_set_request(q, rq, gfp_mask))) { @@ -792,6 +792,8 @@ static struct request *get_request(struct request_queue *q, int rw_flags, if (priv) rl->elvpriv++; + if (blk_queue_io_stat(q)) + rw_flags |= REQ_IO_STAT; spin_unlock_irq(q->queue_lock); rq = blk_alloc_request(q, rw_flags, priv, gfp_mask); diff --git a/block/blk-merge.c b/block/blk-merge.c index 63760ca3da0..23d2a6fe34a 100644 --- a/block/blk-merge.c +++ b/block/blk-merge.c @@ -402,7 +402,10 @@ static int attempt_merge(struct request_queue *q, struct request *req, elv_merge_requests(q, req, next); - blk_account_io_merge(req); + /* + * 'next' is going away, so update stats accordingly + */ + blk_account_io_merge(next); req->ioprio = ioprio_best(req->ioprio, next->ioprio); if (blk_rq_cpu_valid(next)) diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c index cac4e9febe6..3ff9bba3379 100644 --- a/block/blk-sysfs.c +++ b/block/blk-sysfs.c @@ -209,14 +209,10 @@ static ssize_t queue_iostats_store(struct request_queue *q, const char *page, ssize_t ret = queue_var_store(&stats, page, count); spin_lock_irq(q->queue_lock); - elv_quiesce_start(q); - if (stats) queue_flag_set(QUEUE_FLAG_IO_STAT, q); else queue_flag_clear(QUEUE_FLAG_IO_STAT, q); - - elv_quiesce_end(q); spin_unlock_irq(q->queue_lock); return ret; diff --git a/block/blk.h b/block/blk.h index 5dfc41267a0..79c85f7c9ff 100644 --- a/block/blk.h +++ b/block/blk.h @@ -114,12 +114,7 @@ static inline int blk_cpu_to_group(int cpu) static inline int blk_do_io_stat(struct request *rq) { - struct gendisk *disk = rq->rq_disk; - - if (!disk || !disk->queue) - return 0; - - return blk_queue_io_stat(disk->queue) && (rq->cmd_flags & REQ_ELVPRIV); + return rq->rq_disk && blk_rq_io_stat(rq); } #endif diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index ba54c834a59..2755d5c6da2 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -118,6 +118,7 @@ enum rq_flag_bits { __REQ_COPY_USER, /* contains copies of user pages */ __REQ_INTEGRITY, /* integrity metadata has been remapped */ __REQ_NOIDLE, /* Don't anticipate more IO after this one */ + __REQ_IO_STAT, /* account I/O stat */ __REQ_NR_BITS, /* stops here */ }; @@ -145,6 +146,7 @@ enum rq_flag_bits { #define REQ_COPY_USER (1 << __REQ_COPY_USER) #define REQ_INTEGRITY (1 << __REQ_INTEGRITY) #define REQ_NOIDLE (1 << __REQ_NOIDLE) +#define REQ_IO_STAT (1 << __REQ_IO_STAT) #define BLK_MAX_CDB 16 @@ -598,6 +600,7 @@ enum { blk_failfast_transport(rq) || \ blk_failfast_driver(rq)) #define blk_rq_started(rq) ((rq)->cmd_flags & REQ_STARTED) +#define blk_rq_io_stat(rq) ((rq)->cmd_flags & REQ_IO_STAT) #define blk_account_rq(rq) (blk_rq_started(rq) && (blk_fs_request(rq) || blk_discard_rq(rq))) -- cgit v1.2.3 From f3c737de8f57b5ce756010c2175f7d574194b30d Mon Sep 17 00:00:00 2001 From: Sage Weil Date: Thu, 23 Apr 2009 08:37:58 +0200 Subject: umem: fix request_queue lock warning The umem driver issues two warnings on boot, due to blk_plug_device() and blk_remove_plug() being called without q->queue_lock held. Starting with e48ec690 (block: extend queue_flag bitops), the queue_flag_* functions warn if q->queue_lock doesn't appear to be locked. In fact, q->queue_lock is NULL (though that apparently isn't otherwise a problem as the driver is using card->lock for everything). Although blk_init_queue() with take a request_fn_proc and spinlock_t*, there isn't a corresponding init helper that takes a make_request_fn. Setting queue_lock to &card->lock explicitly seems to work fine for me. The warning goes away and the device appears to behave. [ 1.531881] v2.3 : Micro Memory(tm) PCI memory board block driver [ 1.538136] umem 0000:02:01.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.545018] umem 0000:02:01.0: Micro Memory(tm) controller found (PCI Mem Module (Battery Backup)) [ 1.554176] umem 0000:02:01.0: CSR 0xfc9ffc00 -> 0xffffc200013d0c00 (0x100) [ 1.561279] umem 0000:02:01.0: Size 1048576 KB, Battery 1 Disabled (FAILURE), Battery 2 Disabled (FAILURE) [ 1.571114] umem 0000:02:01.0: Window size 16777216 bytes, IRQ 20 [ 1.577304] umem 0000:02:01.0: memory NOT initialized. Consider over-writing whole device. [ 1.585989] umema:<4>------------[ cut here ]------------ [ 1.591775] WARNING: at include/linux/blkdev.h:492 blk_plug_device+0x6d/0x106() [ 1.592025] Hardware name: H8SSL [ 1.592025] Modules linked in: [ 1.592025] Pid: 1, comm: swapper Not tainted 2.6.29 #8 [ 1.592025] Call Trace: [ 1.592025] [] warn_slowpath+0xd3/0xf2 [ 1.592025] [] ? save_trace+0x3f/0x9b [ 1.592025] [] ? add_lock_to_list+0x7a/0xba [ 1.592025] [] ? validate_chain+0xb3b/0xce8 [ 1.592025] [] ? mm_make_request+0x27/0x59 [ 1.592025] [] ? mm_make_request+0x27/0x59 [ 1.592025] [] ? __lock_acquire+0x74e/0x7b9 [ 1.592025] [] ? get_lock_stats+0x34/0x5e [ 1.592025] [] ? put_lock_stats+0xe/0x27 [ 1.592025] [] ? mm_make_request+0x27/0x59 [ 1.592025] [] blk_plug_device+0x6d/0x106 [ 1.592025] [] mm_make_request+0x46/0x59 [ 1.592025] [] generic_make_request+0x335/0x3cf [ 1.592025] [] ? mempool_alloc_slab+0x11/0x13 [ 1.592025] [] ? mempool_alloc+0x45/0x101 [ 1.592025] [] ? put_lock_stats+0xe/0x27 [ 1.592025] [] submit_bio+0x10a/0x119 [ 1.592025] [] submit_bh+0xe5/0x109 [ 1.592025] [] block_read_full_page+0x2aa/0x2cb [ 1.592025] [] ? blkdev_get_block+0x0/0x4c [ 1.592025] [] ? _spin_unlock_irq+0x36/0x51 [ 1.592025] [] ? __lru_cache_add+0x92/0xb2 [ 1.592025] [] blkdev_readpage+0x13/0x15 [ 1.592025] [] read_cache_page_async+0x90/0x134 [ 1.592025] [] ? blkdev_readpage+0x0/0x15 [ 1.592025] [] ? adfspart_check_ICS+0x0/0x16c [ 1.592025] [] read_cache_page+0xe/0x45 [ 1.592025] [] read_dev_sector+0x2e/0x93 [ 1.592025] [] adfspart_check_ICS+0x28/0x16c [ 1.592025] [] ? trace_hardirqs_on+0xd/0xf [ 1.592025] [] ? adfspart_check_ICS+0x0/0x16c [ 1.592025] [] rescan_partitions+0x168/0x2fb [ 1.592025] [] __blkdev_get+0x259/0x336 [ 1.592025] [] ? kobject_put+0x47/0x4b [ 1.592025] [] blkdev_get+0xb/0xd [ 1.592025] [] register_disk+0xc4/0x12b [ 1.592025] [] add_disk+0xc3/0x12d [ 1.592025] [] ? mm_init+0x0/0x1a5 [ 1.592025] [] mm_init+0x129/0x1a5 [ 1.592025] [] ? mm_init+0x0/0x1a5 [ 1.592025] [] _stext+0x56/0x130 [ 1.592025] [] ? register_irq_proc+0xae/0xca [ 1.592025] [] ? proc_pid_lookup+0xb4/0x18b [ 1.592025] [] kernel_init+0x132/0x18b [ 1.592025] [] child_rip+0xa/0x20 [ 1.592025] [] ? restore_args+0x0/0x30 [ 1.592025] [] ? kernel_init+0x0/0x18b [ 1.592025] [] ? child_rip+0x0/0x20 [ 1.592025] ---[ end trace 7150b3b86da74e1e ]--- [ 1.889858] ------------[ cut here ]------------[ve_plug+0x5f/0x91() [ 1.893848] Hardware name: H8SSL [ 1.893848] Modules linked in: [ 1.893848] Pid: 1, comm: swapper Tainted: G W 2.6.29 #8 [ 1.893848] Call Trace: [ 1.893848] [] warn_slowpath+0xd3/0xf2 [ 1.893848] [] ? trace_hardirqs_on_thunk+0x3a/0x3f [ 1.893848] [] ? restore_args+0x0/0x30 [ 1.893848] [] ? __atomic_notifier_call_chain+0x0/0xb2 [ 1.893848] [] ? _spin_unlock_irq+0x31/0x51 [ 1.893848] [] ? _spin_unlock_irq+0x4d/0x51 [ 1.893848] [] ? mm_make_request+0x4e/0x59 [ 1.893848] [] ? get_lock_stats+0x34/0x5e [ 1.893848] [] ? put_lock_stats+0x25/0x27 [ 1.893848] [] ? mm_unplug_device+0x25/0x50 [ 1.893848] [] blk_remove_plug+0x5f/0x91 [ 1.893848] [] mm_unplug_device+0x30/0x50 [ 1.893848] [] blk_unplug+0x78/0x7d [ 1.893848] [] blk_backing_dev_unplug+0xd/0xf [ 1.893848] [] block_sync_page+0x4a/0x4c [ 1.893848] [] sync_page+0x44/0x4d [ 1.893848] [] __wait_on_bit_lock+0x42/0x8a [ 1.893848] [] ? sync_page+0x0/0x4d [ 1.893848] [] __lock_page+0x64/0x6b [ 1.893848] [] ? wake_bit_function+0x0/0x2a [ 1.893848] [] read_cache_page_async+0xd4/0x134 [ 1.893848] [] ? blkdev_readpage+0x0/0x15 [ 1.893848] [] ? adfspart_check_ICS+0x0/0x16c [ 1.893848] [] read_cache_page+0xe/0x45 [ 1.893848] [] read_dev_sector+0x2e/0x93 [ 1.893848] [] adfspart_check_ICS+0x28/0x16c [ 1.893848] [] ? trace_hardirqs_on+0xd/0xf [ 1.893848] [] ? adfspart_check_ICS+0x0/0x16c [ 1.893848] [] rescan_partitions+0x168/0x2fb [ 1.893848] [] __blkdev_get+0x259/0x336 [ 1.893848] [] ? kobject_put+0x47/0x4b [ 1.893848] [] blkdev_get+0xb/0xd [ 1.893848] [] register_disk+0xc4/0x12b [ 1.893848] [] add_disk+0xc3/0x12d [ 1.893848] [] ? mm_init+0x0/0x1a5 [ 1.893848] [] mm_init+0x129/0x1a5 [ 1.893848] [] ? mm_init+0x0/0x1a5 [ 1.893848] [] _stext+0x56/0x130 [ 1.893848] [] ? register_irq_proc+0xae/0xca [ 1.893848] [] ? proc_pid_lookup+0xb4/0x18b [ 1.893848] [] kernel_init+0x132/0x18b [ 1.893848] [] child_rip+0xa/0x20 [ 1.893848] [] ? restore_args+0x0/0x30 [ 1.893848] [] ? kernel_init+0x0/0x18b [ 1.893848] [] ? child_rip+0x0/0x20 [ 1.893848] ---[ end trace 7150b3b86da74e1f ]--- Signed-off-by: Sage Weil Signed-off-by: Jens Axboe --- drivers/block/umem.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/block/umem.c b/drivers/block/umem.c index 9744d59a69f..858c34dd032 100644 --- a/drivers/block/umem.c +++ b/drivers/block/umem.c @@ -906,6 +906,7 @@ static int __devinit mm_pci_probe(struct pci_dev *dev, goto failed_alloc; blk_queue_make_request(card->queue, mm_make_request); + card->queue->queue_lock = &card->lock; card->queue->queuedata = card; card->queue->unplug_fn = mm_unplug_device; -- cgit v1.2.3 From 17d5c8ca7572124c9623045f24b0c21d4aa2b47f Mon Sep 17 00:00:00 2001 From: Hannes Reinecke Date: Thu, 23 Apr 2009 10:32:59 +0200 Subject: block: fix intermittent dm timeout based oops Very rarely under stress testing of dm, oopses are occuring as something tampers with an old stack frame. This has been traced back to blk_abort_queue() leaving a timeout_list pointing to the stack. The reason is that sometimes blk_abort_request() won't delete the timer (if the request is marked as complete but before the timer has been removed, a small race window). Fix this by splicing back from the ususally empty list to the q->timeout_list. Signed-off-by: Hannes Reinecke Signed-off-by: Jens Axboe --- block/blk-timeout.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/block/blk-timeout.c b/block/blk-timeout.c index 8f570c4c80e..1ec0d503cac 100644 --- a/block/blk-timeout.c +++ b/block/blk-timeout.c @@ -230,6 +230,13 @@ void blk_abort_queue(struct request_queue *q) list_for_each_entry_safe(rq, tmp, &list, timeout_list) blk_abort_request(rq); + /* + * Occasionally, blk_abort_request() will return without + * deleting the element from the list. Make sure we add those back + * instead of leaving them on the local stack list. + */ + list_splice(&list, &q->timeout_list); + spin_unlock_irqrestore(q->queue_lock, flags); } -- cgit v1.2.3 From 26a2ac009c2b07e1959c8864ca23486c1c485587 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Thu, 23 Apr 2009 12:13:27 +0200 Subject: cfq-iosched: clear ->prio_trees[] on cfqd alloc Not strictly needed, but we should make it clear that we init the rbtree roots here. Signed-off-by: Jens Axboe --- block/cfq-iosched.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index 7e13f04b5ed..20a54b8e03e 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -2446,12 +2446,22 @@ static void cfq_exit_queue(struct elevator_queue *e) static void *cfq_init_queue(struct request_queue *q) { struct cfq_data *cfqd; + int i; cfqd = kmalloc_node(sizeof(*cfqd), GFP_KERNEL | __GFP_ZERO, q->node); if (!cfqd) return NULL; cfqd->service_tree = CFQ_RB_ROOT; + + /* + * Not strictly needed (since RB_ROOT just clears the node and we + * zeroed cfqd on alloc), but better be safe in case someone decides + * to add magic to the rb code + */ + for (i = 0; i < CFQ_PRIO_LISTS; i++) + cfqd->prio_trees[i] = RB_ROOT; + INIT_LIST_HEAD(&cfqd->cic_list); cfqd->queue = q; -- cgit v1.2.3 From 3ac6c9f8a66726745136e46f63600550c3eb6cec Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Thu, 23 Apr 2009 12:14:56 +0200 Subject: cfq-iosched: fix bug with aliased request and cooperation detection cfq_prio_tree_lookup() should return the direct match, yet it always returns zero. Fix that. cfq_prio_tree_add() assumes that we don't get a direct match, while it is very possible that we do. Using O_DIRECT, you can have different cfqq with matching requests, since you don't have the page cache to serialize things for you. Fix this bug by only adding the cfqq if there isn't an existing match. Signed-off-by: Jens Axboe --- block/cfq-iosched.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index 20a54b8e03e..b0b754a6882 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -584,12 +584,13 @@ cfq_prio_tree_lookup(struct cfq_data *cfqd, int ioprio, sector_t sector, else break; p = n; + cfqq = NULL; } *ret_parent = parent; if (rb_link) *rb_link = p; - return NULL; + return cfqq; } static void cfq_prio_tree_add(struct cfq_data *cfqd, struct cfq_queue *cfqq) @@ -608,10 +609,10 @@ static void cfq_prio_tree_add(struct cfq_data *cfqd, struct cfq_queue *cfqq) __cfqq = cfq_prio_tree_lookup(cfqd, cfqq->ioprio, cfqq->next_rq->sector, &parent, &p); - BUG_ON(__cfqq); - - rb_link_node(&cfqq->p_node, parent, p); - rb_insert_color(&cfqq->p_node, root); + if (!__cfqq) { + rb_link_node(&cfqq->p_node, parent, p); + rb_insert_color(&cfqq->p_node, root); + } } /* -- cgit v1.2.3 From f2d1f0ae7851be5ebd9613a80dac139270938809 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Thu, 23 Apr 2009 12:19:38 +0200 Subject: cfq-iosched: cache prio_tree root in cfqq->p_root Currently we look it up from ->ioprio, but ->ioprio can change if either the process gets its IO priority changed explicitly, or if cfq decides to temporarily boost it. So if we are unlucky, we can end up attempting to remove a node from a different rbtree root than where it was added. Fix this by using ->org_ioprio as the prio_tree index, since that will only change for explicit IO priority settings (not for a boost). Additionally cache the rbtree root inside the cfqq, then we don't have to add code to reinsert the cfqq in the prio_tree if IO priority changes. Signed-off-by: Jens Axboe --- block/cfq-iosched.c | 34 ++++++++++++++++++++-------------- 1 file changed, 20 insertions(+), 14 deletions(-) diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index b0b754a6882..a55a9bd75bd 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -154,6 +154,8 @@ struct cfq_queue { unsigned long rb_key; /* prio tree member */ struct rb_node p_node; + /* prio tree root we belong to, if any */ + struct rb_root *p_root; /* sorted list of pending requests */ struct rb_root sort_list; /* if fifo isn't expired, next request to serve */ @@ -558,10 +560,10 @@ static void cfq_service_tree_add(struct cfq_data *cfqd, struct cfq_queue *cfqq, } static struct cfq_queue * -cfq_prio_tree_lookup(struct cfq_data *cfqd, int ioprio, sector_t sector, - struct rb_node **ret_parent, struct rb_node ***rb_link) +cfq_prio_tree_lookup(struct cfq_data *cfqd, struct rb_root *root, + sector_t sector, struct rb_node **ret_parent, + struct rb_node ***rb_link) { - struct rb_root *root = &cfqd->prio_trees[ioprio]; struct rb_node **p, *parent; struct cfq_queue *cfqq = NULL; @@ -595,24 +597,27 @@ cfq_prio_tree_lookup(struct cfq_data *cfqd, int ioprio, sector_t sector, static void cfq_prio_tree_add(struct cfq_data *cfqd, struct cfq_queue *cfqq) { - struct rb_root *root = &cfqd->prio_trees[cfqq->ioprio]; struct rb_node **p, *parent; struct cfq_queue *__cfqq; - if (!RB_EMPTY_NODE(&cfqq->p_node)) - rb_erase_init(&cfqq->p_node, root); + if (cfqq->p_root) { + rb_erase(&cfqq->p_node, cfqq->p_root); + cfqq->p_root = NULL; + } if (cfq_class_idle(cfqq)) return; if (!cfqq->next_rq) return; - __cfqq = cfq_prio_tree_lookup(cfqd, cfqq->ioprio, cfqq->next_rq->sector, + cfqq->p_root = &cfqd->prio_trees[cfqq->org_ioprio]; + __cfqq = cfq_prio_tree_lookup(cfqd, cfqq->p_root, cfqq->next_rq->sector, &parent, &p); if (!__cfqq) { rb_link_node(&cfqq->p_node, parent, p); - rb_insert_color(&cfqq->p_node, root); - } + rb_insert_color(&cfqq->p_node, cfqq->p_root); + } else + cfqq->p_root = NULL; } /* @@ -657,8 +662,10 @@ static void cfq_del_cfqq_rr(struct cfq_data *cfqd, struct cfq_queue *cfqq) if (!RB_EMPTY_NODE(&cfqq->rb_node)) cfq_rb_erase(&cfqq->rb_node, &cfqd->service_tree); - if (!RB_EMPTY_NODE(&cfqq->p_node)) - rb_erase_init(&cfqq->p_node, &cfqd->prio_trees[cfqq->ioprio]); + if (cfqq->p_root) { + rb_erase(&cfqq->p_node, cfqq->p_root); + cfqq->p_root = NULL; + } BUG_ON(!cfqd->busy_queues); cfqd->busy_queues--; @@ -965,7 +972,7 @@ static inline int cfq_rq_close(struct cfq_data *cfqd, struct request *rq) static struct cfq_queue *cfqq_close(struct cfq_data *cfqd, struct cfq_queue *cur_cfqq) { - struct rb_root *root = &cfqd->prio_trees[cur_cfqq->ioprio]; + struct rb_root *root = &cfqd->prio_trees[cur_cfqq->org_ioprio]; struct rb_node *parent, *node; struct cfq_queue *__cfqq; sector_t sector = cfqd->last_position; @@ -977,8 +984,7 @@ static struct cfq_queue *cfqq_close(struct cfq_data *cfqd, * First, if we find a request starting at the end of the last * request, choose it. */ - __cfqq = cfq_prio_tree_lookup(cfqd, cur_cfqq->ioprio, - sector, &parent, NULL); + __cfqq = cfq_prio_tree_lookup(cfqd, root, sector, &parent, NULL); if (__cfqq) return __cfqq; -- cgit v1.2.3 From 8c652f96d3852b97a49c331cd0bb02d22f3cb31b Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Fri, 24 Apr 2009 01:01:56 +0200 Subject: do_execve() must not clear fs->in_exec if it was set by another thread If do_execve() fails after check_unsafe_exec(), it clears fs->in_exec unconditionally. This is wrong if we race with our sub-thread which also does do_execve: Two threads T1 and T2 and another process P, all share the same ->fs. T1 starts do_execve(BAD_FILE). It calls check_unsafe_exec(), since ->fs is shared, we set LSM_UNSAFE but not ->in_exec. P exits and decrements fs->users. T2 starts do_execve(), calls check_unsafe_exec(), now ->fs is not shared, we set fs->in_exec. T1 continues, open_exec(BAD_FILE) fails, we clear ->in_exec and return to the user-space. T1 does clone(CLONE_FS /* without CLONE_THREAD */). T2 continues without LSM_UNSAFE_SHARE while ->fs is shared with another process. Change check_unsafe_exec() to return res = 1 if we set ->in_exec, and change do_execve() to clear ->in_exec depending on res. When do_execve() suceeds, it is safe to clear ->in_exec unconditionally. It can be set only if we don't share ->fs with another process, and since we already killed all sub-threads either ->in_exec == 0 or we are the only user of this ->fs. Also, we do not need fs->lock to clear fs->in_exec. Signed-off-by: Oleg Nesterov Acked-by: Roland McGrath Acked-by: Hugh Dickins Signed-off-by: Linus Torvalds --- fs/compat.c | 11 +++++------ fs/exec.c | 19 ++++++++++--------- 2 files changed, 15 insertions(+), 15 deletions(-) diff --git a/fs/compat.c b/fs/compat.c index 379a399bf5c..681ed81e6be 100644 --- a/fs/compat.c +++ b/fs/compat.c @@ -1476,6 +1476,7 @@ int compat_do_execve(char * filename, struct linux_binprm *bprm; struct file *file; struct files_struct *displaced; + bool clear_in_exec; int retval; retval = unshare_files(&displaced); @@ -1498,8 +1499,9 @@ int compat_do_execve(char * filename, goto out_unlock; retval = check_unsafe_exec(bprm); - if (retval) + if (retval < 0) goto out_unlock; + clear_in_exec = retval; file = open_exec(filename); retval = PTR_ERR(file); @@ -1546,9 +1548,7 @@ int compat_do_execve(char * filename, goto out; /* execve succeeded */ - write_lock(¤t->fs->lock); current->fs->in_exec = 0; - write_unlock(¤t->fs->lock); current->in_execve = 0; mutex_unlock(¤t->cred_exec_mutex); acct_update_integrals(current); @@ -1568,9 +1568,8 @@ out_file: } out_unmark: - write_lock(¤t->fs->lock); - current->fs->in_exec = 0; - write_unlock(¤t->fs->lock); + if (clear_in_exec) + current->fs->in_exec = 0; out_unlock: current->in_execve = 0; diff --git a/fs/exec.c b/fs/exec.c index 052a961e41a..a2e6989dbc3 100644 --- a/fs/exec.c +++ b/fs/exec.c @@ -1077,9 +1077,11 @@ int check_unsafe_exec(struct linux_binprm *bprm) if (p->fs->users > n_fs) { bprm->unsafe |= LSM_UNSAFE_SHARE; } else { - if (p->fs->in_exec) - res = -EAGAIN; - p->fs->in_exec = 1; + res = -EAGAIN; + if (!p->fs->in_exec) { + p->fs->in_exec = 1; + res = 1; + } } unlock_task_sighand(p, &flags); @@ -1284,6 +1286,7 @@ int do_execve(char * filename, struct linux_binprm *bprm; struct file *file; struct files_struct *displaced; + bool clear_in_exec; int retval; retval = unshare_files(&displaced); @@ -1306,8 +1309,9 @@ int do_execve(char * filename, goto out_unlock; retval = check_unsafe_exec(bprm); - if (retval) + if (retval < 0) goto out_unlock; + clear_in_exec = retval; file = open_exec(filename); retval = PTR_ERR(file); @@ -1355,9 +1359,7 @@ int do_execve(char * filename, goto out; /* execve succeeded */ - write_lock(¤t->fs->lock); current->fs->in_exec = 0; - write_unlock(¤t->fs->lock); current->in_execve = 0; mutex_unlock(¤t->cred_exec_mutex); acct_update_integrals(current); @@ -1377,9 +1379,8 @@ out_file: } out_unmark: - write_lock(¤t->fs->lock); - current->fs->in_exec = 0; - write_unlock(¤t->fs->lock); + if (clear_in_exec) + current->fs->in_exec = 0; out_unlock: current->in_execve = 0; -- cgit v1.2.3 From 437f7fdb607f32b737e4da9f14bebcfdac2c90c3 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Fri, 24 Apr 2009 01:02:45 +0200 Subject: check_unsafe_exec: s/lock_task_sighand/rcu_read_lock/ write_lock(¤t->fs->lock) guarantees we can't wrongly miss LSM_UNSAFE_SHARE, this is what we care about. Use rcu_read_lock() instead of ->siglock to iterate over the sub-threads. We must see all CLONE_THREAD|CLONE_FS threads which didn't pass exit_fs(), it takes fs->lock too. With or without this patch we can miss the freshly cloned thread and set LSM_UNSAFE_SHARE, we don't care. Signed-off-by: Oleg Nesterov Acked-by: Roland McGrath [ Fixed lock/unlock typo - Hugh ] Acked-by: Hugh Dickins Signed-off-by: Linus Torvalds --- fs/exec.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/fs/exec.c b/fs/exec.c index a2e6989dbc3..a3a8ce83940 100644 --- a/fs/exec.c +++ b/fs/exec.c @@ -1060,7 +1060,6 @@ EXPORT_SYMBOL(install_exec_creds); int check_unsafe_exec(struct linux_binprm *bprm) { struct task_struct *p = current, *t; - unsigned long flags; unsigned n_fs; int res = 0; @@ -1068,11 +1067,12 @@ int check_unsafe_exec(struct linux_binprm *bprm) n_fs = 1; write_lock(&p->fs->lock); - lock_task_sighand(p, &flags); + rcu_read_lock(); for (t = next_thread(p); t != p; t = next_thread(t)) { if (t->fs == p->fs) n_fs++; } + rcu_read_unlock(); if (p->fs->users > n_fs) { bprm->unsafe |= LSM_UNSAFE_SHARE; @@ -1083,8 +1083,6 @@ int check_unsafe_exec(struct linux_binprm *bprm) res = 1; } } - - unlock_task_sighand(p, &flags); write_unlock(&p->fs->lock); return res; -- cgit v1.2.3 From 418df63c2d94f238ac7e1d1d53be35dd6b7a7252 Mon Sep 17 00:00:00 2001 From: Jonathan Corbet Date: Wed, 22 Apr 2009 12:01:49 +0100 Subject: Delete slow-work timers properly Slow-work appears to delete its timer as soon as the first user unregisters, even though other users could be active. At the same time, it never seems to delete slow_work_oom_timer. Arrange for both to happen in the shutdown path. Signed-off-by: Jonathan Corbet Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- kernel/slow-work.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/kernel/slow-work.c b/kernel/slow-work.c index cf2bc01186e..b28d19135f4 100644 --- a/kernel/slow-work.c +++ b/kernel/slow-work.c @@ -609,14 +609,14 @@ void slow_work_unregister_user(void) if (slow_work_user_count == 0) { printk(KERN_NOTICE "Slow work thread pool: Shutting down\n"); slow_work_threads_should_exit = true; + del_timer_sync(&slow_work_cull_timer); + del_timer_sync(&slow_work_oom_timer); wake_up_all(&slow_work_thread_wq); wait_for_completion(&slow_work_last_thread_exited); printk(KERN_NOTICE "Slow work thread pool:" " Shut down complete\n"); } - del_timer_sync(&slow_work_cull_timer); - mutex_unlock(&slow_work_user_lock); } EXPORT_SYMBOL(slow_work_unregister_user); -- cgit v1.2.3 From 596a5c4e43b08e90c0cd788861f859bf7ed6eddc Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 22 Apr 2009 12:10:07 +0100 Subject: MN10300: Update the ASB2303 defconfig Update the defconfig for the ASB2303 evaluation board. Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- arch/mn10300/configs/asb2303_defconfig | 160 +++++++++++++++++++-------------- 1 file changed, 94 insertions(+), 66 deletions(-) diff --git a/arch/mn10300/configs/asb2303_defconfig b/arch/mn10300/configs/asb2303_defconfig index 3aa8906b3de..3acce23708b 100644 --- a/arch/mn10300/configs/asb2303_defconfig +++ b/arch/mn10300/configs/asb2303_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc2 -# Tue Feb 19 18:52:24 2008 +# Linux kernel version: 2.6.30-rc2 +# Sat Apr 18 11:13:22 2009 # CONFIG_MN10300=y CONFIG_AM33=y @@ -18,7 +18,6 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_BUG=y CONFIG_QUICKLIST=y CONFIG_ARCH_HAS_ILOG2_U32=y -# CONFIG_ARCH_SUPPORTS_AOUT is not set CONFIG_GENERIC_HARDIRQS=y # CONFIG_HOTPLUG_CPU is not set CONFIG_HZ=1000 @@ -40,52 +39,58 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set -# CONFIG_USER_SCHED is not set -# CONFIG_CGROUP_SCHED is not set -# CONFIG_SYSFS_DEPRECATED is not set +# CONFIG_CGROUPS is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set +CONFIG_STRIP_ASM_SYMS=y # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y # CONFIG_VM_EVENT_COUNTERS is not set +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set CONFIG_PROFILING=y # CONFIG_MARKERS is not set -CONFIG_OPROFILE=y -# CONFIG_HAVE_OPROFILE is not set -# CONFIG_HAVE_KPROBES is not set -# CONFIG_PROC_PAGE_MONITOR is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_SLOW_WORK is not set +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set # CONFIG_BLOCK is not set -CONFIG_CLASSIC_RCU=y -# CONFIG_PREEMPT_RCU is not set +# CONFIG_FREEZER is not set # # Matsushita MN10300 system setup @@ -107,7 +112,6 @@ CONFIG_INTERRUPT_VECTOR_BASE=0x90000000 CONFIG_KERNEL_TEXT_ADDRESS=0x90001000 CONFIG_KERNEL_ZIMAGE_BASE_ADDRESS=0x90700000 CONFIG_PREEMPT=y -CONFIG_PREEMPT_BKL=y CONFIG_MN10300_CURRENT_IN_E2=y CONFIG_MN10300_USING_JTAG=y CONFIG_MN10300_RTC=y @@ -135,13 +139,15 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=1 CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y # # Power management options @@ -152,11 +158,9 @@ CONFIG_VIRT_TO_BUS=y # Executable formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set - -# -# Networking -# CONFIG_NET=y # @@ -194,8 +198,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -203,6 +205,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -212,7 +215,9 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -223,14 +228,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -255,6 +254,7 @@ CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y # CONFIG_MTD_REDBOOT_PARTS_READONLY is not set # CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -297,9 +297,7 @@ CONFIG_MTD_CFI_UTIL=y # # CONFIG_MTD_COMPLEX_MAPPINGS is not set CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0x8000000 -CONFIG_MTD_PHYSMAP_LEN=0x0 -CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_PHYSMAP_COMPAT is not set # CONFIG_MTD_PLATRAM is not set # @@ -318,15 +316,24 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # CONFIG_MTD_NAND is not set # CONFIG_MTD_ONENAND is not set +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + # # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set # CONFIG_PARPORT is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set -# CONFIG_HAVE_IDE is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set # # SCSI device support @@ -334,7 +341,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_SCSI_DMA is not set # CONFIG_SCSI_NETLINK is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -345,10 +352,15 @@ CONFIG_NETDEVICES=y CONFIG_NET_ETHERNET=y CONFIG_MII=y CONFIG_SMC91X=y +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -358,6 +370,10 @@ CONFIG_SMC91X=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -382,6 +398,7 @@ CONFIG_SMC91X=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -403,6 +420,7 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set @@ -411,34 +429,43 @@ CONFIG_RTC=y # CONFIG_R3964 is not set # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # @@ -453,21 +480,17 @@ CONFIG_SSB_POSSIBLE=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -480,21 +503,24 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # Pseudo filesystems # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +# CONFIG_PROC_PAGE_MONITOR is not set CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y @@ -506,19 +532,17 @@ CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set +# CONFIG_ROMFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -535,12 +559,16 @@ CONFIG_SUNRPC=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set # CONFIG_SAMPLES is not set # @@ -548,26 +576,26 @@ CONFIG_MAGIC_SYSRQ=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y - -# -# Profiling support -# +CONFIG_NLATTR=y -- cgit v1.2.3 From 67cd724f6d0919072a284f150a5761a160ac5cfa Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Wed, 22 Apr 2009 15:02:23 +0100 Subject: cafe_nand: Fix warning Wrong types on IRQ handler Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/mtd/nand/cafe_nand.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mtd/nand/cafe_nand.c b/drivers/mtd/nand/cafe_nand.c index 7c5b257ce8e..29acd06b1c3 100644 --- a/drivers/mtd/nand/cafe_nand.c +++ b/drivers/mtd/nand/cafe_nand.c @@ -332,7 +332,7 @@ static void cafe_select_chip(struct mtd_info *mtd, int chipnr) cafe->ctl1 &= ~CTRL1_CHIPSELECT; } -static int cafe_nand_interrupt(int irq, void *id) +static irqreturn_t cafe_nand_interrupt(int irq, void *id) { struct mtd_info *mtd = id; struct cafe_priv *cafe = mtd->priv; -- cgit v1.2.3 From 79e95eba026944ec3353754f24e316d3aaa209fe Mon Sep 17 00:00:00 2001 From: Niels de Vos Date: Wed, 22 Apr 2009 15:02:44 +0100 Subject: serial: remove contact data Remove my name and emailaddress from note in the source. Wincor Nixdorf only has some ITE-chips on their mainboards, other chips are not available for me for testing. Signed-off-by: Niels de Vos Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/serial/8250_pci.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c index 7ddff3f5508..938bc1b6c3f 100644 --- a/drivers/serial/8250_pci.c +++ b/drivers/serial/8250_pci.c @@ -771,8 +771,6 @@ static int pci_netmos_init(struct pci_dev *dev) } /* - * ITE support by Niels de Vos - * * These chips are available with optionally one parallel port and up to * two serial ports. Unfortunately they all have the same product id. * -- cgit v1.2.3 From ec5f5bf80501abfe2da2897cfcde8452b545aacb Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Wed, 22 Apr 2009 15:03:15 +0100 Subject: radio_si470x: Fix free memory corruption The release path for a disconnected device frees the object then unlocks the mutex in the freed object... Found by Dan Carpenter using Smatch Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/media/radio/radio-si470x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/radio/radio-si470x.c b/drivers/media/radio/radio-si470x.c index 92c297796a9..bd945d04dc9 100644 --- a/drivers/media/radio/radio-si470x.c +++ b/drivers/media/radio/radio-si470x.c @@ -1200,7 +1200,7 @@ static int si470x_fops_release(struct file *file) video_unregister_device(radio->videodev); kfree(radio->buffer); kfree(radio); - goto unlock; + goto done; } /* stop rds reception */ -- cgit v1.2.3 From e5b89542ea18020961882228c26db3ba87f6e608 Mon Sep 17 00:00:00 2001 From: Christian Borntraeger Date: Thu, 23 Apr 2009 16:42:59 +0930 Subject: virtio-rng: Remove false BUG for spurious callbacks The virtio-rng drivers checks for spurious callbacks. Since callbacks can be implemented via shared interrupts (e.g. PCI) this could lead to guest kernel oopses with lots of virtio devices. Signed-off-by: Christian Borntraeger Cc: Rusty Russell Cc: stable@kernel.org Signed-off-by: Linus Torvalds --- drivers/char/hw_random/virtio-rng.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/char/hw_random/virtio-rng.c b/drivers/char/hw_random/virtio-rng.c index d0e563e4fc3..86e83f88313 100644 --- a/drivers/char/hw_random/virtio-rng.c +++ b/drivers/char/hw_random/virtio-rng.c @@ -37,9 +37,9 @@ static void random_recv_done(struct virtqueue *vq) { int len; - /* We never get spurious callbacks. */ + /* We can get spurious callbacks, e.g. shared IRQs + virtio_pci. */ if (!vq->vq_ops->get_buf(vq, &len)) - BUG(); + return; data_left = len / sizeof(random_data[0]); complete(&have_data); -- cgit v1.2.3 From 91ac033d8377552d3654501a105ab55bf546940e Mon Sep 17 00:00:00 2001 From: Marc Dionne Date: Thu, 23 Apr 2009 11:21:55 +0100 Subject: CacheFiles: Fix the documentation to use the correct credential pointer names Adjust the CacheFiles documentation to use the correct names of the credential pointers in task_struct. The documentation was using names from the old versions of the credentials patches. Signed-off-by: Marc Dionne Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- Documentation/filesystems/caching/cachefiles.txt | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/Documentation/filesystems/caching/cachefiles.txt b/Documentation/filesystems/caching/cachefiles.txt index c78a49b7bba..748a1ae49e1 100644 --- a/Documentation/filesystems/caching/cachefiles.txt +++ b/Documentation/filesystems/caching/cachefiles.txt @@ -407,7 +407,7 @@ A NOTE ON SECURITY ================== CacheFiles makes use of the split security in the task_struct. It allocates -its own task_security structure, and redirects current->act_as to point to it +its own task_security structure, and redirects current->cred to point to it when it acts on behalf of another process, in that process's context. The reason it does this is that it calls vfs_mkdir() and suchlike rather than @@ -429,9 +429,9 @@ This means it may lose signals or ptrace events for example, and affects what the process looks like in /proc. So CacheFiles makes use of a logical split in the security between the -objective security (task->sec) and the subjective security (task->act_as). The -objective security holds the intrinsic security properties of a process and is -never overridden. This is what appears in /proc, and is what is used when a +objective security (task->real_cred) and the subjective security (task->cred). +The objective security holds the intrinsic security properties of a process and +is never overridden. This is what appears in /proc, and is what is used when a process is the target of an operation by some other process (SIGKILL for example). -- cgit v1.2.3 From a5422a5111811401f7756345e4c237ff06cf6d1e Mon Sep 17 00:00:00 2001 From: Fred Isaman Date: Thu, 23 Apr 2009 16:40:32 +0300 Subject: lib: find_last_bit.o needed by a module only, move it from lib to obj Currently, although find_last_bit is EXPORTed, it is statically linked with the kernel and is referenced only under CONFIG_SMP. When CONFIG_SMP is undefined and find_last_bit is referenced only by modules, linking fails with: ERROR: "find_last_bit" [fs/nfs/nfs.ko] undefined! Cc: Rusty Russell Cc: Trond Myklebust Signed-off-by: Fred Isaman Signed-off-by: Benny Halevy Signed-off-by: Linus Torvalds --- lib/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/lib/Makefile b/lib/Makefile index d6edd6753f4..33a40e40e3e 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -38,7 +38,7 @@ lib-$(CONFIG_RWSEM_GENERIC_SPINLOCK) += rwsem-spinlock.o lib-$(CONFIG_RWSEM_XCHGADD_ALGORITHM) += rwsem.o lib-$(CONFIG_GENERIC_FIND_FIRST_BIT) += find_next_bit.o lib-$(CONFIG_GENERIC_FIND_NEXT_BIT) += find_next_bit.o -lib-$(CONFIG_GENERIC_FIND_LAST_BIT) += find_last_bit.o +obj-$(CONFIG_GENERIC_FIND_LAST_BIT) += find_last_bit.o obj-$(CONFIG_GENERIC_HWEIGHT) += hweight.o obj-$(CONFIG_LOCK_KERNEL) += kernel_lock.o obj-$(CONFIG_DEBUG_PREEMPT) += smp_processor_id.o -- cgit v1.2.3 From 84baf74bf23bbe9f3deafb5d2f27e2b5dc0bc052 Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 23 Apr 2009 16:41:13 +0100 Subject: ROMFS: romfs_lookup() shouldn't be doing a partial name comparison romfs_lookup() should be using a routine akin to strcmp() on the backing store, rather than one akin to strncmp(). If it uses the latter, it's liable to match /bin/shutdown when looking up /bin/sh. Signed-off-by: David Howells Tested-by: Michal Simek Signed-off-by: Linus Torvalds --- fs/romfs/internal.h | 4 ++-- fs/romfs/storage.c | 67 +++++++++++++++++++++++++++++++++++++++-------------- fs/romfs/super.c | 4 ++-- 3 files changed, 53 insertions(+), 22 deletions(-) diff --git a/fs/romfs/internal.h b/fs/romfs/internal.h index 06044a9dc62..95217b83011 100644 --- a/fs/romfs/internal.h +++ b/fs/romfs/internal.h @@ -43,5 +43,5 @@ extern int romfs_dev_read(struct super_block *sb, unsigned long pos, void *buf, size_t buflen); extern ssize_t romfs_dev_strnlen(struct super_block *sb, unsigned long pos, size_t maxlen); -extern int romfs_dev_strncmp(struct super_block *sb, unsigned long pos, - const char *str, size_t size); +extern int romfs_dev_strcmp(struct super_block *sb, unsigned long pos, + const char *str, size_t size); diff --git a/fs/romfs/storage.c b/fs/romfs/storage.c index 7e3e1e12a08..66ce9ddfe50 100644 --- a/fs/romfs/storage.c +++ b/fs/romfs/storage.c @@ -67,26 +67,35 @@ static ssize_t romfs_mtd_strnlen(struct super_block *sb, * compare a string to one in a romfs image on MTD * - return 1 if matched, 0 if differ, -ve if error */ -static int romfs_mtd_strncmp(struct super_block *sb, unsigned long pos, - const char *str, size_t size) +static int romfs_mtd_strcmp(struct super_block *sb, unsigned long pos, + const char *str, size_t size) { - u_char buf[16]; + u_char buf[17]; size_t len, segment; int ret; - /* scan the string up to 16 bytes at a time */ + /* scan the string up to 16 bytes at a time, and attempt to grab the + * trailing NUL whilst we're at it */ + buf[0] = 0xff; + while (size > 0) { - segment = min_t(size_t, size, 16); + segment = min_t(size_t, size + 1, 17); ret = ROMFS_MTD_READ(sb, pos, segment, &len, buf); if (ret < 0) return ret; + len--; if (memcmp(buf, str, len) != 0) return 0; + buf[0] = buf[len]; size -= len; pos += len; str += len; } + /* check the trailing NUL was */ + if (buf[0]) + return 0; + return 1; } #endif /* CONFIG_ROMFS_ON_MTD */ @@ -154,28 +163,48 @@ static ssize_t romfs_blk_strnlen(struct super_block *sb, * compare a string to one in a romfs image on a block device * - return 1 if matched, 0 if differ, -ve if error */ -static int romfs_blk_strncmp(struct super_block *sb, unsigned long pos, - const char *str, size_t size) +static int romfs_blk_strcmp(struct super_block *sb, unsigned long pos, + const char *str, size_t size) { struct buffer_head *bh; unsigned long offset; size_t segment; - bool x; + bool matched, terminated = false; - /* scan the string up to 16 bytes at a time */ + /* compare string up to a block at a time */ while (size > 0) { offset = pos & (ROMBSIZE - 1); segment = min_t(size_t, size, ROMBSIZE - offset); bh = sb_bread(sb, pos >> ROMBSBITS); if (!bh) return -EIO; - x = (memcmp(bh->b_data + offset, str, segment) != 0); - brelse(bh); - if (x) - return 0; + matched = (memcmp(bh->b_data + offset, str, segment) == 0); + size -= segment; pos += segment; str += segment; + if (matched && size == 0 && offset + segment < ROMBSIZE) { + if (!bh->b_data[offset + segment]) + terminated = true; + else + matched = false; + } + brelse(bh); + if (!matched) + return 0; + } + + if (!terminated) { + /* the terminating NUL must be on the first byte of the next + * block */ + BUG_ON((pos & (ROMBSIZE - 1)) != 0); + bh = sb_bread(sb, pos >> ROMBSBITS); + if (!bh) + return -EIO; + matched = !bh->b_data[0]; + brelse(bh); + if (!matched) + return 0; } return 1; @@ -234,10 +263,12 @@ ssize_t romfs_dev_strnlen(struct super_block *sb, /* * compare a string to one in romfs + * - the string to be compared to, str, may not be NUL-terminated; instead the + * string is of the specified size * - return 1 if matched, 0 if differ, -ve if error */ -int romfs_dev_strncmp(struct super_block *sb, unsigned long pos, - const char *str, size_t size) +int romfs_dev_strcmp(struct super_block *sb, unsigned long pos, + const char *str, size_t size) { size_t limit; @@ -246,16 +277,16 @@ int romfs_dev_strncmp(struct super_block *sb, unsigned long pos, return -EIO; if (size > ROMFS_MAXFN) return -ENAMETOOLONG; - if (size > limit - pos) + if (size + 1 > limit - pos) return -EIO; #ifdef CONFIG_ROMFS_ON_MTD if (sb->s_mtd) - return romfs_mtd_strncmp(sb, pos, str, size); + return romfs_mtd_strcmp(sb, pos, str, size); #endif #ifdef CONFIG_ROMFS_ON_BLOCK if (sb->s_bdev) - return romfs_blk_strncmp(sb, pos, str, size); + return romfs_blk_strcmp(sb, pos, str, size); #endif return -EIO; } diff --git a/fs/romfs/super.c b/fs/romfs/super.c index 10ca7d984a8..c53b5ef8a02 100644 --- a/fs/romfs/super.c +++ b/fs/romfs/super.c @@ -240,8 +240,8 @@ static struct dentry *romfs_lookup(struct inode *dir, struct dentry *dentry, goto error; /* try to match the first 16 bytes of name */ - ret = romfs_dev_strncmp(dir->i_sb, offset + ROMFH_SIZE, name, - len); + ret = romfs_dev_strcmp(dir->i_sb, offset + ROMFH_SIZE, name, + len); if (ret < 0) goto error; if (ret == 1) -- cgit v1.2.3 From 4b2b0b9753194cad44d7295c32044b89710efd70 Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 23 Apr 2009 16:41:18 +0100 Subject: ROMFS: Advance destination buffer pointer when reading from a blockdev RomFS should advance the destination buffer pointer when reading data from a blockdev source (the data may be split over multiple blocks, each requiring its own sb_read() call). Without this, all the data is copied to the beginning of the output buffer. Signed-off-by: David Howells Tested-by: Michal Simek Signed-off-by: Linus Torvalds --- fs/romfs/storage.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/romfs/storage.c b/fs/romfs/storage.c index 66ce9ddfe50..b3208adf8e7 100644 --- a/fs/romfs/storage.c +++ b/fs/romfs/storage.c @@ -120,6 +120,7 @@ static int romfs_blk_read(struct super_block *sb, unsigned long pos, return -EIO; memcpy(buf, bh->b_data + offset, segment); brelse(bh); + buf += segment; buflen -= segment; pos += segment; } -- cgit v1.2.3 From 0c8454f56623505a99463405fd7d5664adfbb094 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sat, 25 Apr 2009 00:16:06 +0200 Subject: PM/Hibernate: Fix waiting for image device to appear on resume Commit c751085943362143f84346d274e0011419c84202 ("PM/Hibernate: Wait for SCSI devices scan to complete during resume") added a call to scsi_complete_async_scans() to software_resume(), so that it waited for the SCSI scanning to complete, but the call was added at a wrong place. Namely, it should have been added after wait_for_device_probe(), which is called only if the image partition hasn't been specified yet. Also, it's reasonable to check if the image partition is present and only wait for the device probing and SCSI scanning to complete if it is not the case. Additionally, since noresume is checked right at the beginning of software_resume() and the function returns immediately if it's set, it doesn't make sense to check it once again later. Signed-off-by: Rafael J. Wysocki Signed-off-by: Linus Torvalds --- kernel/power/disk.c | 51 +++++++++++++++++++++++++++------------------------ 1 file changed, 27 insertions(+), 24 deletions(-) diff --git a/kernel/power/disk.c b/kernel/power/disk.c index 0854770b63b..e71ca9cd81b 100644 --- a/kernel/power/disk.c +++ b/kernel/power/disk.c @@ -645,13 +645,6 @@ static int software_resume(void) if (noresume) return 0; - /* - * We can't depend on SCSI devices being available after loading one of - * their modules if scsi_complete_async_scans() is not called and the - * resume device usually is a SCSI one. - */ - scsi_complete_async_scans(); - /* * name_to_dev_t() below takes a sysfs buffer mutex when sysfs * is configured into the kernel. Since the regular hibernate @@ -663,32 +656,42 @@ static int software_resume(void) * here to avoid lockdep complaining. */ mutex_lock_nested(&pm_mutex, SINGLE_DEPTH_NESTING); + + if (swsusp_resume_device) + goto Check_image; + + if (!strlen(resume_file)) { + error = -ENOENT; + goto Unlock; + } + + pr_debug("PM: Checking image partition %s\n", resume_file); + + /* Check if the device is there */ + swsusp_resume_device = name_to_dev_t(resume_file); if (!swsusp_resume_device) { - if (!strlen(resume_file)) { - mutex_unlock(&pm_mutex); - return -ENOENT; - } /* * Some device discovery might still be in progress; we need * to wait for this to finish. */ wait_for_device_probe(); + /* + * We can't depend on SCSI devices being available after loading + * one of their modules until scsi_complete_async_scans() is + * called and the resume device usually is a SCSI one. + */ + scsi_complete_async_scans(); + swsusp_resume_device = name_to_dev_t(resume_file); - pr_debug("PM: Resume from partition %s\n", resume_file); - } else { - pr_debug("PM: Resume from partition %d:%d\n", - MAJOR(swsusp_resume_device), - MINOR(swsusp_resume_device)); + if (!swsusp_resume_device) { + error = -ENODEV; + goto Unlock; + } } - if (noresume) { - /** - * FIXME: If noresume is specified, we need to find the - * partition and reset it back to normal swap space. - */ - mutex_unlock(&pm_mutex); - return 0; - } + Check_image: + pr_debug("PM: Resume from partition %d:%d\n", + MAJOR(swsusp_resume_device), MINOR(swsusp_resume_device)); pr_debug("PM: Checking hibernation image.\n"); error = swsusp_check(); -- cgit v1.2.3 From c80d471a476b6d6fe0bc1fd25293c24c66b7aaaf Mon Sep 17 00:00:00 2001 From: Tim Abbott Date: Sat, 25 Apr 2009 22:10:56 -0400 Subject: Add new HEAD_TEXT_SECTION macro. This patch is preparation for replacing all uses of ".head.text" or ".text.head" in the kernel with macros, so that the section name can later be changed without having to touch a lot of the kernel. Since some linker scripts do more complex things than referencing HEAD_TEXT, we add a HEAD_TEXT_SECTION macro that just contains the actual name. I've defined HEAD_TEXT_SECTION in a new header, include/linux/section-names.h, so that this section name only needs to appear in one place. I anticipate creating similar macro structures for a number of other section names. The long-term goal here is to be able to change the kernel's magic section names to those that are compatible with -ffunction-sections -fdata-sections. This requires renaming all magic sections with names of the form ".text.foo". Signed-off-by: Tim Abbott Signed-off-by: Linus Torvalds --- include/asm-generic/vmlinux.lds.h | 4 +++- include/linux/init.h | 4 +++- include/linux/section-names.h | 6 ++++++ 3 files changed, 12 insertions(+), 2 deletions(-) create mode 100644 include/linux/section-names.h diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h index 7fa660fd449..eaa06ef6f7d 100644 --- a/include/asm-generic/vmlinux.lds.h +++ b/include/asm-generic/vmlinux.lds.h @@ -1,3 +1,5 @@ +#include + #ifndef LOAD_OFFSET #define LOAD_OFFSET 0 #endif @@ -331,7 +333,7 @@ #endif /* Section used for early init (in .S files) */ -#define HEAD_TEXT *(.head.text) +#define HEAD_TEXT *(HEAD_TEXT_SECTION) /* init and exit section handling */ #define INIT_DATA \ diff --git a/include/linux/init.h b/include/linux/init.h index f121a7a10c3..20a1334e34e 100644 --- a/include/linux/init.h +++ b/include/linux/init.h @@ -2,6 +2,8 @@ #define _LINUX_INIT_H #include +#include +#include /* These macros are used to mark some functions or * initialized data (doesn't apply to uninitialized data) @@ -107,7 +109,7 @@ #define __memexitconst __section(.memexit.rodata) /* For assembly routines */ -#define __HEAD .section ".head.text","ax" +#define __HEAD .section __stringify(HEAD_TEXT_SECTION),"ax" #define __INIT .section ".init.text","ax" #define __FINIT .previous diff --git a/include/linux/section-names.h b/include/linux/section-names.h new file mode 100644 index 00000000000..c956f4eb2ad --- /dev/null +++ b/include/linux/section-names.h @@ -0,0 +1,6 @@ +#ifndef __LINUX_SECTION_NAMES_H +#define __LINUX_SECTION_NAMES_H + +#define HEAD_TEXT_SECTION .head.text + +#endif /* !__LINUX_SECTION_NAMES_H */ -- cgit v1.2.3 From 0ebdcb4d0480d1b8219cf5f9eab0fb5d889af0ad Mon Sep 17 00:00:00 2001 From: Tim Abbott Date: Sat, 25 Apr 2009 22:10:57 -0400 Subject: xtensa: convert to use __HEAD and HEAD_TEXT macros. Signed-off-by: Tim Abbott Cc: Chris Zankel Acked-by: Sam Ravnborg Signed-off-by: Linus Torvalds --- arch/xtensa/kernel/head.S | 3 ++- arch/xtensa/kernel/vmlinux.lds.S | 4 ++-- 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/arch/xtensa/kernel/head.S b/arch/xtensa/kernel/head.S index 0817f9db836..d9ddc1ba761 100644 --- a/arch/xtensa/kernel/head.S +++ b/arch/xtensa/kernel/head.S @@ -19,6 +19,7 @@ #include #include +#include #include /* @@ -45,7 +46,7 @@ * instruction. */ - .section .head.text, "ax" + __HEAD .globl _start _start: _j 2f .align 4 diff --git a/arch/xtensa/kernel/vmlinux.lds.S b/arch/xtensa/kernel/vmlinux.lds.S index c1be9a4a740..5accf51053d 100644 --- a/arch/xtensa/kernel/vmlinux.lds.S +++ b/arch/xtensa/kernel/vmlinux.lds.S @@ -85,8 +85,8 @@ SECTIONS .text : { - /* The .head.text section must be the first section! */ - *(.head.text) + /* The HEAD_TEXT section must be the first section! */ + HEAD_TEXT *(.literal .text) VMLINUX_SYMBOL(__sched_text_start) = .; *(.sched.literal .sched.text) -- cgit v1.2.3 From 92ca52343ca503c1f957bd649df4ef914d5fc1e8 Mon Sep 17 00:00:00 2001 From: Tim Abbott Date: Sat, 25 Apr 2009 22:10:58 -0400 Subject: alpha: convert to use __HEAD and HEAD_TEXT macros. This has the consequence of changing the section name use for head code from ".text.head" to ".head.text". Since this commit changes all users in the architecture, this change should be harmless. Signed-off-by: Tim Abbott Cc: Richard Henderson Acked-by: Sam Ravnborg Signed-off-by: Linus Torvalds --- arch/alpha/kernel/head.S | 3 ++- arch/alpha/kernel/vmlinux.lds.S | 2 +- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/alpha/kernel/head.S b/arch/alpha/kernel/head.S index 7ac1f1372c3..4bdd1d2ff35 100644 --- a/arch/alpha/kernel/head.S +++ b/arch/alpha/kernel/head.S @@ -7,10 +7,11 @@ * the kernel global pointer and jump to the kernel entry-point. */ +#include #include #include -.section .text.head, "ax" +__HEAD .globl swapper_pg_dir .globl _stext swapper_pg_dir=SWAPPER_PGD diff --git a/arch/alpha/kernel/vmlinux.lds.S b/arch/alpha/kernel/vmlinux.lds.S index ef37fc1acae..b9d6568e5f7 100644 --- a/arch/alpha/kernel/vmlinux.lds.S +++ b/arch/alpha/kernel/vmlinux.lds.S @@ -16,7 +16,7 @@ SECTIONS _text = .; /* Text and read-only data */ .text : { - *(.text.head) + HEAD_TEXT TEXT_TEXT SCHED_TEXT LOCK_TEXT -- cgit v1.2.3 From b6a8d95c95814079ded93c14c4b394015d8b65cd Mon Sep 17 00:00:00 2001 From: Tim Abbott Date: Sat, 25 Apr 2009 22:10:59 -0400 Subject: frv: convert frv to use __HEAD and HEAD_TEXT macros. This has the consequence of changing the section name use for head code from ".text.head" to ".head.text". Since this commit changes all users in the architecture, this change should be harmless. Signed-off-by: Tim Abbott Cc: David Howells Acked-by: Sam Ravnborg Signed-off-by: Linus Torvalds --- arch/frv/kernel/head.S | 3 ++- arch/frv/kernel/vmlinux.lds.S | 2 +- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/frv/kernel/head.S b/arch/frv/kernel/head.S index fecf751c5ca..b825ef3f2d5 100644 --- a/arch/frv/kernel/head.S +++ b/arch/frv/kernel/head.S @@ -9,6 +9,7 @@ * 2 of the License, or (at your option) any later version. */ +#include #include #include #include @@ -27,7 +28,7 @@ # command line string # ############################################################################### - .section .text.head,"ax" + __HEAD .balign 4 .globl _boot, __head_reference diff --git a/arch/frv/kernel/vmlinux.lds.S b/arch/frv/kernel/vmlinux.lds.S index b95c4eace62..22d9787406e 100644 --- a/arch/frv/kernel/vmlinux.lds.S +++ b/arch/frv/kernel/vmlinux.lds.S @@ -26,7 +26,7 @@ SECTIONS _sinittext = .; .init.text : { - *(.text.head) + HEAD_TEXT #ifndef CONFIG_DEBUG_INFO INIT_TEXT EXIT_TEXT -- cgit v1.2.3 From 34963696629b6d1e0066a5f2e67993e409c9434b Mon Sep 17 00:00:00 2001 From: Tim Abbott Date: Sat, 25 Apr 2009 22:11:02 -0400 Subject: m32r: convert to use __HEAD and HEAD_TEXT macros. This has the consequence of changing the section name use for head code from ".text.head" to ".head.text". Since this commit changes all users in the architecture, this change should be harmless. Signed-off-by: Tim Abbott Cc: Hirokazu Takata Acked-by: Sam Ravnborg Signed-off-by: Linus Torvalds --- arch/m32r/kernel/head.S | 2 +- arch/m32r/kernel/vmlinux.lds.S | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/m32r/kernel/head.S b/arch/m32r/kernel/head.S index 90916067b9c..0a7194439eb 100644 --- a/arch/m32r/kernel/head.S +++ b/arch/m32r/kernel/head.S @@ -23,7 +23,7 @@ __INITDATA /* * References to members of the boot_cpu_data structure. */ -.section .text.head, "ax" +__HEAD .global start_kernel .global __bss_start .global _end diff --git a/arch/m32r/kernel/vmlinux.lds.S b/arch/m32r/kernel/vmlinux.lds.S index 9db05df20c0..4179adf6c62 100644 --- a/arch/m32r/kernel/vmlinux.lds.S +++ b/arch/m32r/kernel/vmlinux.lds.S @@ -27,7 +27,7 @@ SECTIONS _text = .; /* Text and read-only data */ .boot : { *(.boot) } = 0 .text : { - *(.text.head) + HEAD_TEXT TEXT_TEXT SCHED_TEXT LOCK_TEXT -- cgit v1.2.3 From 6f335cab0431d5df4995bcd4fd952d4c746d5a86 Mon Sep 17 00:00:00 2001 From: Tim Abbott Date: Sat, 25 Apr 2009 22:11:03 -0400 Subject: m68k: convert to use __HEAD and HEAD_TEXT macros. This has the consequence of changing the section name use for head code from ".text.head" to ".head.text". Since this commit changes all users in the architecture, this change should be harmless. Signed-off-by: Tim Abbott Cc: Geert Uytterhoeven Cc: Roman Zippel Acked-by: Sam Ravnborg Signed-off-by: Linus Torvalds --- arch/m68k/kernel/head.S | 2 +- arch/m68k/kernel/sun3-head.S | 2 +- arch/m68k/kernel/vmlinux-std.lds | 2 +- arch/m68k/kernel/vmlinux-sun3.lds | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/m68k/kernel/head.S b/arch/m68k/kernel/head.S index f513f530de9..86edb5fbcfc 100644 --- a/arch/m68k/kernel/head.S +++ b/arch/m68k/kernel/head.S @@ -577,7 +577,7 @@ func_define putn,1 #endif .endm -.section ".text.head","ax" +__HEAD ENTRY(_stext) /* * Version numbers of the bootinfo interface diff --git a/arch/m68k/kernel/sun3-head.S b/arch/m68k/kernel/sun3-head.S index aad01592dbb..9e5c3e57c59 100644 --- a/arch/m68k/kernel/sun3-head.S +++ b/arch/m68k/kernel/sun3-head.S @@ -29,7 +29,7 @@ kernel_pmd_table: .skip 0x2000 .globl kernel_pg_dir .equ kernel_pg_dir,kernel_pmd_table - .section .text.head + __HEAD ENTRY(_stext) ENTRY(_start) diff --git a/arch/m68k/kernel/vmlinux-std.lds b/arch/m68k/kernel/vmlinux-std.lds index f846d4e3e5e..01d212bb05a 100644 --- a/arch/m68k/kernel/vmlinux-std.lds +++ b/arch/m68k/kernel/vmlinux-std.lds @@ -12,7 +12,7 @@ SECTIONS . = 0x1000; _text = .; /* Text and read-only data */ .text : { - *(.text.head) + HEAD_TEXT TEXT_TEXT SCHED_TEXT LOCK_TEXT diff --git a/arch/m68k/kernel/vmlinux-sun3.lds b/arch/m68k/kernel/vmlinux-sun3.lds index d9368c0709b..c192f773db9 100644 --- a/arch/m68k/kernel/vmlinux-sun3.lds +++ b/arch/m68k/kernel/vmlinux-sun3.lds @@ -12,7 +12,7 @@ SECTIONS . = 0xE002000; _text = .; /* Text and read-only data */ .text : { - *(.text.head) + HEAD_TEXT TEXT_TEXT SCHED_TEXT LOCK_TEXT -- cgit v1.2.3 From 9760f8fc60766f8fde0ef5cf7df714c2ce864ab6 Mon Sep 17 00:00:00 2001 From: Tim Abbott Date: Sat, 25 Apr 2009 22:11:04 -0400 Subject: mn10300: convert to use __HEAD and HEAD_TEXT macros. This has the consequence of changing the section name use for head code from ".text.head" to ".head.text". Since this commit changes all users in the architecture, this change should be harmless. Signed-off-by: Tim Abbott Cc: David Howells Acked-by: Sam Ravnborg Signed-off-by: Linus Torvalds --- arch/mn10300/kernel/head.S | 3 ++- arch/mn10300/kernel/vmlinux.lds.S | 5 +---- 2 files changed, 3 insertions(+), 5 deletions(-) diff --git a/arch/mn10300/kernel/head.S b/arch/mn10300/kernel/head.S index 8a8309fbe3c..14f27f3bfaf 100644 --- a/arch/mn10300/kernel/head.S +++ b/arch/mn10300/kernel/head.S @@ -9,6 +9,7 @@ * 2 of the Licence, or (at your option) any later version. */ +#include #include #include #include @@ -19,7 +20,7 @@ #include #include - .section .text.head,"ax" + __HEAD ############################################################################### # diff --git a/arch/mn10300/kernel/vmlinux.lds.S b/arch/mn10300/kernel/vmlinux.lds.S index b8259668f7d..24de6b90f40 100644 --- a/arch/mn10300/kernel/vmlinux.lds.S +++ b/arch/mn10300/kernel/vmlinux.lds.S @@ -27,10 +27,7 @@ SECTIONS _stext = .; _text = .; /* Text and read-only data */ .text : { - *( - .text.head - .text - ) + HEAD_TEXT TEXT_TEXT SCHED_TEXT LOCK_TEXT -- cgit v1.2.3 From e70398458738fd26f96adc95eea8efe908809f08 Mon Sep 17 00:00:00 2001 From: Tim Abbott Date: Sat, 25 Apr 2009 22:11:05 -0400 Subject: powerpc: convert to use __HEAD and HEAD_TEXT macros. This has the consequence of changing the section name use for head code from ".text.head" to ".head.text". Since this commit changes all users in the architecture, this change should be harmless. Signed-off-by: Tim Abbott Cc: Benjamin Herrenschmidt Acked-by: Sam Ravnborg Signed-off-by: Linus Torvalds --- arch/powerpc/kernel/head_32.S | 3 ++- arch/powerpc/kernel/head_40x.S | 3 ++- arch/powerpc/kernel/head_44x.S | 3 ++- arch/powerpc/kernel/head_8xx.S | 3 ++- arch/powerpc/kernel/head_fsl_booke.S | 3 ++- arch/powerpc/kernel/vmlinux.lds.S | 2 +- 6 files changed, 11 insertions(+), 6 deletions(-) diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S index 54e68c11ae1..c01467f952d 100644 --- a/arch/powerpc/kernel/head_32.S +++ b/arch/powerpc/kernel/head_32.S @@ -21,6 +21,7 @@ * */ +#include #include #include #include @@ -50,7 +51,7 @@ mtspr SPRN_DBAT##n##L,RB; \ 1: - .section .text.head, "ax" + __HEAD .stabs "arch/powerpc/kernel/",N_SO,0,0,0f .stabs "head_32.S",N_SO,0,0,0f 0: diff --git a/arch/powerpc/kernel/head_40x.S b/arch/powerpc/kernel/head_40x.S index 56d8e5d90c5..0c96911d429 100644 --- a/arch/powerpc/kernel/head_40x.S +++ b/arch/powerpc/kernel/head_40x.S @@ -31,6 +31,7 @@ * */ +#include #include #include #include @@ -52,7 +53,7 @@ * * This is all going to change RSN when we add bi_recs....... -- Dan */ - .section .text.head, "ax" + __HEAD _ENTRY(_stext); _ENTRY(_start); diff --git a/arch/powerpc/kernel/head_44x.S b/arch/powerpc/kernel/head_44x.S index b56fecc93a1..18d8a1677c4 100644 --- a/arch/powerpc/kernel/head_44x.S +++ b/arch/powerpc/kernel/head_44x.S @@ -28,6 +28,7 @@ * option) any later version. */ +#include #include #include #include @@ -50,7 +51,7 @@ * r7 - End of kernel command line string * */ - .section .text.head, "ax" + __HEAD _ENTRY(_stext); _ENTRY(_start); /* diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S index 3c9452d4308..52ff8c53b93 100644 --- a/arch/powerpc/kernel/head_8xx.S +++ b/arch/powerpc/kernel/head_8xx.S @@ -19,6 +19,7 @@ * */ +#include #include #include #include @@ -38,7 +39,7 @@ #else #define DO_8xx_CPU6(val, reg) #endif - .section .text.head, "ax" + __HEAD _ENTRY(_stext); _ENTRY(_start); diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S index 4c22620d009..5bdcc06d294 100644 --- a/arch/powerpc/kernel/head_fsl_booke.S +++ b/arch/powerpc/kernel/head_fsl_booke.S @@ -30,6 +30,7 @@ * option) any later version. */ +#include #include #include #include @@ -53,7 +54,7 @@ * r7 - End of kernel command line string * */ - .section .text.head, "ax" + __HEAD _ENTRY(_stext); _ENTRY(_start); /* diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S index b9ef1644a72..d7425fffbc1 100644 --- a/arch/powerpc/kernel/vmlinux.lds.S +++ b/arch/powerpc/kernel/vmlinux.lds.S @@ -52,7 +52,7 @@ SECTIONS /* Text and gots */ .text : AT(ADDR(.text) - LOAD_OFFSET) { ALIGN_FUNCTION(); - *(.text.head) + HEAD_TEXT _text = .; *(.text .fixup .text.init.refok .exit.text.refok __ftr_alt_*) SCHED_TEXT -- cgit v1.2.3 From 2133bb8d8c691c08d47f16d5971ba98f0ac241bf Mon Sep 17 00:00:00 2001 From: Tim Abbott Date: Sat, 25 Apr 2009 22:11:06 -0400 Subject: s390: convert to use __HEAD and HEAD_TEXT macros. This has the consequence of changing the section name use for head code from ".text.head" to ".head.text". Since this commit changes all users in the architecture, this change should be harmless. Signed-off-by: Tim Abbott Cc: Martin Schwidefsky Cc: Heiko Carstens Acked-by: Sam Ravnborg Signed-off-by: Linus Torvalds --- arch/s390/kernel/head.S | 3 ++- arch/s390/kernel/vmlinux.lds.S | 4 ++-- 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/arch/s390/kernel/head.S b/arch/s390/kernel/head.S index bba14494ee0..22596d70fc2 100644 --- a/arch/s390/kernel/head.S +++ b/arch/s390/kernel/head.S @@ -23,6 +23,7 @@ * */ +#include #include #include #include @@ -35,7 +36,7 @@ #define ARCH_OFFSET 0 #endif -.section ".text.head","ax" +__HEAD #ifndef CONFIG_IPL .org 0 .long 0x00080000,0x80000000+startup # Just a restart PSW diff --git a/arch/s390/kernel/vmlinux.lds.S b/arch/s390/kernel/vmlinux.lds.S index 7a2063eb88f..89399b8756c 100644 --- a/arch/s390/kernel/vmlinux.lds.S +++ b/arch/s390/kernel/vmlinux.lds.S @@ -29,8 +29,8 @@ SECTIONS . = 0x00000000; .text : { _text = .; /* Text and read-only data */ - *(.text.head) - TEXT_TEXT + HEAD_TEXT + TEXT_TEXT SCHED_TEXT LOCK_TEXT KPROBES_TEXT -- cgit v1.2.3 From bbe215c231ac809e42b037345c1fa8e8eb09b00a Mon Sep 17 00:00:00 2001 From: Tim Abbott Date: Sat, 25 Apr 2009 22:11:07 -0400 Subject: sh: convert to use __HEAD and HEAD_TEXT macros. This has the consequence of changing the section name use for head code from ".text.head" to ".head.text". Since this commit changes all users in the architecture, this change should be harmless. Signed-off-by: Tim Abbott Cc: Paul Mundt Acked-by: Sam Ravnborg Signed-off-by: Linus Torvalds --- arch/sh/kernel/head_32.S | 3 ++- arch/sh/kernel/head_64.S | 5 ++++- arch/sh/kernel/vmlinux_32.lds.S | 2 +- arch/sh/kernel/vmlinux_64.lds.S | 2 +- 4 files changed, 8 insertions(+), 4 deletions(-) diff --git a/arch/sh/kernel/head_32.S b/arch/sh/kernel/head_32.S index 788605ff708..a78be74b8d3 100644 --- a/arch/sh/kernel/head_32.S +++ b/arch/sh/kernel/head_32.S @@ -10,6 +10,7 @@ * * Head.S contains the SH exception handlers and startup code. */ +#include #include #include @@ -40,7 +41,7 @@ ENTRY(empty_zero_page) 1: .skip PAGE_SIZE - empty_zero_page - 1b - .section .text.head, "ax" + __HEAD /* * Condition at the entry of _stext: diff --git a/arch/sh/kernel/head_64.S b/arch/sh/kernel/head_64.S index 7ccfb995a39..3ea765844c7 100644 --- a/arch/sh/kernel/head_64.S +++ b/arch/sh/kernel/head_64.S @@ -8,6 +8,9 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. */ + +#include + #include #include #include @@ -110,7 +113,7 @@ empty_bad_pte_table: fpu_in_use: .quad 0 - .section .text.head, "ax" + __HEAD .balign L1_CACHE_BYTES /* * Condition at the entry of __stext: diff --git a/arch/sh/kernel/vmlinux_32.lds.S b/arch/sh/kernel/vmlinux_32.lds.S index d0b2a715cd1..dd9b2ee1312 100644 --- a/arch/sh/kernel/vmlinux_32.lds.S +++ b/arch/sh/kernel/vmlinux_32.lds.S @@ -31,7 +31,7 @@ SECTIONS } = 0 .text : { - *(.text.head) + HEAD_TEXT TEXT_TEXT SCHED_TEXT LOCK_TEXT diff --git a/arch/sh/kernel/vmlinux_64.lds.S b/arch/sh/kernel/vmlinux_64.lds.S index 33fa4645140..69664460c68 100644 --- a/arch/sh/kernel/vmlinux_64.lds.S +++ b/arch/sh/kernel/vmlinux_64.lds.S @@ -42,7 +42,7 @@ SECTIONS } = 0 .text : C_PHYS(.text) { - *(.text.head) + HEAD_TEXT TEXT_TEXT *(.text64) *(.text..SHmedia32) -- cgit v1.2.3 From ce8a7424d23a36f043d0de8484f888971c831119 Mon Sep 17 00:00:00 2001 From: Tim Abbott Date: Sat, 25 Apr 2009 22:11:08 -0400 Subject: sparc: convert to use __HEAD and HEAD_TEXT macros. This has the consequence of changing the section name use for head code from ".text.head" to ".head.text". Since this commit changes all users in the architecture, this change should be harmless. Signed-off-by: Tim Abbott Cc: David S. Miller Acked-by: Sam Ravnborg Signed-off-by: Linus Torvalds --- arch/sparc/kernel/head_32.S | 2 +- arch/sparc/kernel/vmlinux.lds.S | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/sparc/kernel/head_32.S b/arch/sparc/kernel/head_32.S index f0b4b516304..e91f01a5759 100644 --- a/arch/sparc/kernel/head_32.S +++ b/arch/sparc/kernel/head_32.S @@ -72,7 +72,7 @@ sun4e_notsup: .align 4 /* The Sparc trap table, bootloader gives us control at _start. */ - .section .text.head,"ax" + __HEAD .globl start, _stext, _start, __stext .globl trapbase _start: /* danger danger */ diff --git a/arch/sparc/kernel/vmlinux.lds.S b/arch/sparc/kernel/vmlinux.lds.S index 76267085b13..fcbbd000ec0 100644 --- a/arch/sparc/kernel/vmlinux.lds.S +++ b/arch/sparc/kernel/vmlinux.lds.S @@ -41,7 +41,7 @@ SECTIONS .text TEXTSTART : { _text = .; - *(.text.head) + HEAD_TEXT TEXT_TEXT SCHED_TEXT LOCK_TEXT -- cgit v1.2.3 From 40f4a6d522e68a0203ebefb57f3cbdac4a622169 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Wed, 22 Apr 2009 10:50:19 +0000 Subject: sh: sh7785lcr: fix defconfig for 29-bit mode Fix the problem that cannot work 29-bit mode when use sh7785lcr_defconfig. Signed-off-by: Yoshihiro Shimoda Signed-off-by: Paul Mundt --- arch/sh/configs/sh7785lcr_defconfig | 57 ++++++++++++++++++++++++------------- 1 file changed, 37 insertions(+), 20 deletions(-) diff --git a/arch/sh/configs/sh7785lcr_defconfig b/arch/sh/configs/sh7785lcr_defconfig index 8a42bbef1f5..e4fac2efc05 100644 --- a/arch/sh/configs/sh7785lcr_defconfig +++ b/arch/sh/configs/sh7785lcr_defconfig @@ -1,10 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29 -# Thu Apr 2 19:15:58 2009 +# Linux kernel version: 2.6.30-rc2 +# Wed Apr 22 19:17:56 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y +# CONFIG_SUPERH64 is not set CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y @@ -79,6 +80,7 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -98,6 +100,7 @@ CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set CONFIG_PROFILING=y +# CONFIG_MARKERS is not set # CONFIG_OPROFILE is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set @@ -106,6 +109,8 @@ CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y +# CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -118,7 +123,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -166,6 +170,7 @@ CONFIG_CPU_SHX2=y # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set # CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7724 is not set # CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set @@ -175,8 +180,6 @@ CONFIG_CPU_SUBTYPE_SH7785=y # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set # CONFIG_CPU_SUBTYPE_SH7366 is not set -# CONFIG_CPU_SUBTYPE_SH5_101 is not set -# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options @@ -186,38 +189,31 @@ CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 CONFIG_MEMORY_START=0x08000000 CONFIG_MEMORY_SIZE=0x08000000 -# CONFIG_29BIT is not set -CONFIG_32BIT=y -CONFIG_PMB_ENABLE=y -# CONFIG_PMB is not set -CONFIG_PMB_FIXED=y +CONFIG_29BIT=y +# CONFIG_PMB_ENABLE is not set # CONFIG_X2TLB is not set CONFIG_VSYSCALL=y # CONFIG_NUMA is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_DEFAULT=y -CONFIG_MAX_ACTIVE_REGIONS=2 +CONFIG_MAX_ACTIVE_REGIONS=1 CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y -CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y -CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y -# CONFIG_FLATMEM_MANUAL is not set +CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set -CONFIG_SPARSEMEM_MANUAL=y -CONFIG_SPARSEMEM=y -CONFIG_HAVE_MEMORY_PRESENT=y +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y -# CONFIG_MEMORY_HOTPLUG is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -CONFIG_MIGRATION=y # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 @@ -249,6 +245,7 @@ CONFIG_CPU_HAS_FPU=y # # CONFIG_SH_HIGHLANDER is not set CONFIG_SH_SH7785LCR=y +CONFIG_SH_SH7785LCR_29BIT_PHYSMAPS=y # # Timer and clock configuration @@ -672,6 +669,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -1009,15 +1007,17 @@ CONFIG_USB_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y +# CONFIG_DRAGONRISE_FF is not set CONFIG_HID_EZKEY=y +# CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y +# CONFIG_HID_KENSINGTON is not set CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set @@ -1218,6 +1218,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1239,6 +1240,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1289,6 +1295,7 @@ CONFIG_MINIX_FS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1377,6 +1384,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1413,6 +1423,7 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1422,9 +1433,14 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1542,6 +1558,7 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines -- cgit v1.2.3 From 6b3480855aad6e22ca90981a4c7893a7f41ffb47 Mon Sep 17 00:00:00 2001 From: Adrian McMenamin Date: Sat, 25 Apr 2009 20:43:18 +0000 Subject: maple: input: fix up maple mouse driver The maple mouse driver currently in mainline is broken: bash-3.1# modprobe maplemouse [ 56.886378] input: Dreamcast Mouse as /devices/virtual/input/input3 [ 56.918379] Unable to handle kernel NULL pointer dereference at virtual address 00000004 [ 56.930543] pc = c003304e [ 56.934973] *pde = 00000000 [ 56.944948] Oops: 0000 [#1] [ 56.947867] Modules linked in: maplemouse(+) [ 56.952353] [ 56.953921] Pid : 1157, Comm: \0x09\0x09modprobe [ 56.958021] CPU : 0 \0x09\0x09Not tainted (2.6.30-rc2-00130-g3e98f9f #1) [ 56.958052] [ 56.966567] PC is at dc_mouse_open+0xe/0x40 [maplemouse] [ 56.972125] PR is at input_open_device+0x8a/0xc0 [ 56.976944] PC : c003304e SP : 8c88bdcc SR : 40008100 TEA : c0033834 [ 56.983854] R0 : 000006c4 R1 : 00000000 R2 : 40008101 R3 : 00000000 [ 56.990744] R4 : 8c8db800 R5 : c0033080 R6 : 00000005 R7 : 00000200 [ 56.997635] R8 : 8c8db800 R9 : 8c8dbe3c R10 : 00000000 R11 : 8c98881c [ 57.004525] R12 : 8c8dbe64 R13 : 8ca50140 R14 : 8c88bdd4 [ 57.010063] MACH: 00000497 MACL: 00000348 GBR : 29674440 PR : 8c1b4d0a [ 57.016939] ... Here is a fix for this, keeping an open and close, so reducing the load on the system when the mouse is not in use, and also properly referencing the maple device buffer following the recent update. Signed-off-by: Adrian McMenamin Signed-off-by: Paul Mundt --- drivers/input/mouse/maplemouse.c | 43 +++++++++++++++++++++------------------- 1 file changed, 23 insertions(+), 20 deletions(-) diff --git a/drivers/input/mouse/maplemouse.c b/drivers/input/mouse/maplemouse.c index d196abfb68b..5f278176eb9 100644 --- a/drivers/input/mouse/maplemouse.c +++ b/drivers/input/mouse/maplemouse.c @@ -2,8 +2,8 @@ * SEGA Dreamcast mouse driver * Based on drivers/usb/usbmouse.c * - * Copyright Yaegashi Takeshi, 2001 - * Adrian McMenamin, 2008 + * Copyright (c) Yaegashi Takeshi, 2001 + * Copyright (c) Adrian McMenamin, 2008 - 2009 */ #include @@ -29,7 +29,7 @@ static void dc_mouse_callback(struct mapleq *mq) struct maple_device *mapledev = mq->dev; struct dc_mouse *mse = maple_get_drvdata(mapledev); struct input_dev *dev = mse->dev; - unsigned char *res = mq->recvbuf; + unsigned char *res = mq->recvbuf->buf; buttons = ~res[8]; relx = *(unsigned short *)(res + 12) - 512; @@ -47,7 +47,7 @@ static void dc_mouse_callback(struct mapleq *mq) static int dc_mouse_open(struct input_dev *dev) { - struct dc_mouse *mse = dev->dev.platform_data; + struct dc_mouse *mse = maple_get_drvdata(to_maple_dev(&dev->dev)); maple_getcond_callback(mse->mdev, dc_mouse_callback, HZ/50, MAPLE_FUNC_MOUSE); @@ -57,29 +57,33 @@ static int dc_mouse_open(struct input_dev *dev) static void dc_mouse_close(struct input_dev *dev) { - struct dc_mouse *mse = dev->dev.platform_data; + struct dc_mouse *mse = maple_get_drvdata(to_maple_dev(&dev->dev)); maple_getcond_callback(mse->mdev, dc_mouse_callback, 0, MAPLE_FUNC_MOUSE); } - +/* allow the mouse to be used */ static int __devinit probe_maple_mouse(struct device *dev) { struct maple_device *mdev = to_maple_dev(dev); struct maple_driver *mdrv = to_maple_driver(dev->driver); + int error; struct input_dev *input_dev; struct dc_mouse *mse; - int error; mse = kzalloc(sizeof(struct dc_mouse), GFP_KERNEL); - input_dev = input_allocate_device(); - - if (!mse || !input_dev) { + if (!mse) { error = -ENOMEM; goto fail; } + input_dev = input_allocate_device(); + if (!input_dev) { + error = -ENOMEM; + goto fail_nomem; + } + mse->dev = input_dev; mse->mdev = mdev; @@ -89,25 +93,24 @@ static int __devinit probe_maple_mouse(struct device *dev) BIT_MASK(BTN_RIGHT) | BIT_MASK(BTN_MIDDLE); input_dev->relbit[0] = BIT_MASK(REL_X) | BIT_MASK(REL_Y) | BIT_MASK(REL_WHEEL); - input_dev->name = mdev->product_name; - input_dev->id.bustype = BUS_HOST; input_dev->open = dc_mouse_open; input_dev->close = dc_mouse_close; + input_dev->name = mdev->product_name; + input_dev->id.bustype = BUS_HOST; + error = input_register_device(input_dev); + if (error) + goto fail_register; mdev->driver = mdrv; maple_set_drvdata(mdev, mse); - error = input_register_device(input_dev); - if (error) - goto fail; - - return 0; + return error; -fail: +fail_register: input_free_device(input_dev); - maple_set_drvdata(mdev, NULL); +fail_nomem: kfree(mse); - mdev->driver = NULL; +fail: return error; } -- cgit v1.2.3