From 295c01f90db2b8b8394e1f7cde59b96d71f98e07 Mon Sep 17 00:00:00 2001 From: Christian Hohnstaedt Date: Sun, 12 Apr 2009 13:01:44 +0800 Subject: crypto: ixp4xx - check firmware for crypto support - the loaded firmware may not support crypto at all or only support DES and 3DES but not AES or support DES, 3DES and AES. - in case of no crypto support of the firmware, the module load will fail. - in case of missing AES support, the AES algorithms are not registered and a warning is printed during module load. Signed-off-by: Christian Hohnstaedt Signed-off-by: Herbert Xu --- drivers/crypto/ixp4xx_crypto.c | 33 ++++++++++++++++++++++++++++++++- 1 file changed, 32 insertions(+), 1 deletion(-) diff --git a/drivers/crypto/ixp4xx_crypto.c b/drivers/crypto/ixp4xx_crypto.c index af9761ccf9f..9224c1f4931 100644 --- a/drivers/crypto/ixp4xx_crypto.c +++ b/drivers/crypto/ixp4xx_crypto.c @@ -415,6 +415,7 @@ static void crypto_done_action(unsigned long arg) static int init_ixp_crypto(void) { int ret = -ENODEV; + u32 msg[2] = { 0, 0 }; if (! ( ~(*IXP4XX_EXP_CFG2) & (IXP4XX_FEATURE_HASH | IXP4XX_FEATURE_AES | IXP4XX_FEATURE_DES))) { @@ -426,9 +427,35 @@ static int init_ixp_crypto(void) return ret; if (!npe_running(npe_c)) { - npe_load_firmware(npe_c, npe_name(npe_c), dev); + ret = npe_load_firmware(npe_c, npe_name(npe_c), dev); + if (ret) { + return ret; + } + if (npe_recv_message(npe_c, msg, "STATUS_MSG")) + goto npe_error; + } else { + if (npe_send_message(npe_c, msg, "STATUS_MSG")) + goto npe_error; + + if (npe_recv_message(npe_c, msg, "STATUS_MSG")) + goto npe_error; } + switch ((msg[1]>>16) & 0xff) { + case 3: + printk(KERN_WARNING "Firmware of %s lacks AES support\n", + npe_name(npe_c)); + support_aes = 0; + break; + case 4: + case 5: + support_aes = 1; + break; + default: + printk(KERN_ERR "Firmware of %s lacks crypto support\n", + npe_name(npe_c)); + return -ENODEV; + } /* buffer_pool will also be used to sometimes store the hmac, * so assure it is large enough */ @@ -459,6 +486,10 @@ static int init_ixp_crypto(void) qmgr_enable_irq(RECV_QID); return 0; + +npe_error: + printk(KERN_ERR "%s not responding\n", npe_name(npe_c)); + ret = -EIO; err: if (ctx_pool) dma_pool_destroy(ctx_pool); -- cgit v1.2.3 From abe5fa7899fb5809ddc7336d8dd0edd5b2b96665 Mon Sep 17 00:00:00 2001 From: Steffen Klassert Date: Wed, 15 Apr 2009 20:45:03 +0800 Subject: crypto: eseqiv - Fix IV generation for sync algorithms If crypto_ablkcipher_encrypt() returns synchronous, eseqiv_complete2() is called even if req->giv is already the pointer to the generated IV. The generated IV is overwritten with some random data in this case. This patch fixes this by calling eseqiv_complete2() just if the generated IV has to be copied to req->giv. Signed-off-by: Steffen Klassert Signed-off-by: Herbert Xu --- crypto/eseqiv.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/crypto/eseqiv.c b/crypto/eseqiv.c index 2a342c8e52b..3ca3b669d5d 100644 --- a/crypto/eseqiv.c +++ b/crypto/eseqiv.c @@ -153,7 +153,8 @@ static int eseqiv_givencrypt(struct skcipher_givcrypt_request *req) if (err) goto out; - eseqiv_complete2(req); + if (giv != req->giv) + eseqiv_complete2(req); out: return err; -- cgit v1.2.3 From 37fc334cc8eb84f5fe0a5a1cbe6a6a68049e142a Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Tue, 21 Apr 2009 13:27:16 +0800 Subject: crypto: api - Fix algorithm module auto-loading The commit a760a6656e6f00bb0144a42a048cf0266646e22c (crypto: api - Fix module load deadlock with fallback algorithms) broke the auto-loading of algorithms that require fallbacks. The problem is that the fallback mask check is missing an and which cauess bits that should be considered to interfere with the result. Reported-by: Chuck Ebbert Signed-off-by: Herbert Xu --- crypto/api.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/crypto/api.c b/crypto/api.c index 314dab96840..fd2545decb2 100644 --- a/crypto/api.c +++ b/crypto/api.c @@ -221,7 +221,8 @@ struct crypto_alg *crypto_larval_lookup(const char *name, u32 type, u32 mask) request_module(name); - if (!((type ^ CRYPTO_ALG_NEED_FALLBACK) & mask) && + if (!((type ^ CRYPTO_ALG_NEED_FALLBACK) & mask & + CRYPTO_ALG_NEED_FALLBACK) && snprintf(tmp, sizeof(tmp), "%s-all", name) < sizeof(tmp)) request_module(tmp); -- cgit v1.2.3 From acd246b7494c629aa617da49716409566cf52149 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Tue, 21 Apr 2009 13:55:20 +0800 Subject: crypto: padlock - Revert aes-all alias to aes Since the padlock-aes driver doesn't require a fallback (it's only padlock-sha that does), it should use the aes alias rather than aes-all so that ones that do need a fallback can use it. Signed-off-by: Herbert Xu --- drivers/crypto/padlock-aes.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/crypto/padlock-aes.c b/drivers/crypto/padlock-aes.c index 3f0fdd18255..856b3cc2558 100644 --- a/drivers/crypto/padlock-aes.c +++ b/drivers/crypto/padlock-aes.c @@ -489,4 +489,4 @@ MODULE_DESCRIPTION("VIA PadLock AES algorithm support"); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Michal Ludvig"); -MODULE_ALIAS("aes-all"); +MODULE_ALIAS("aes"); -- cgit v1.2.3 From 818cf5909701806285d977f7a9365c5cadb062a7 Mon Sep 17 00:00:00 2001 From: David Rientjes Date: Thu, 23 Apr 2009 09:58:22 +0300 Subject: slub: enforce MAX_ORDER slub_max_order may not be equal to or greater than MAX_ORDER. Additionally, if a single object cannot be placed in a slab of slub_max_order, it still must allocate slabs below MAX_ORDER. Acked-by: Christoph Lameter Signed-off-by: David Rientjes Signed-off-by: Pekka Enberg --- mm/slub.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/mm/slub.c b/mm/slub.c index 7ab54ecbd3f..0e1247ed2a0 100644 --- a/mm/slub.c +++ b/mm/slub.c @@ -1909,7 +1909,7 @@ static inline int calculate_order(int size) * Doh this slab cannot be placed using slub_max_order. */ order = slab_order(size, 1, MAX_ORDER, 1); - if (order <= MAX_ORDER) + if (order < MAX_ORDER) return order; return -ENOSYS; } @@ -2522,6 +2522,7 @@ __setup("slub_min_order=", setup_slub_min_order); static int __init setup_slub_max_order(char *str) { get_option(&str, &slub_max_order); + slub_max_order = min(slub_max_order, MAX_ORDER - 1); return 1; } -- cgit v1.2.3 From 45cb50e646d1560eff01c5ad0f0df3c7fd6148dd Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Fri, 24 Apr 2009 12:13:18 -0400 Subject: ACPI video: dmi check for broken _BQC on Acer Aspire 5720 On Acer Aspire 5720, _BQC always returns a value 9 smaller than the actual brightness level. Add dmi quirk for this laptop. http://bugzilla.kernel.org/show_bug.cgi?id=13121 Tested-by: Maxim Levitsky Signed-off-by: Zhang Rui Signed-off-by: Len Brown --- drivers/acpi/video.c | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index cd4fb7543a9..7e8ee49ebd4 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -538,6 +538,33 @@ acpi_video_device_lcd_set_level(struct acpi_video_device *device, int level) return -EINVAL; } +/* + * For some buggy _BQC methods, we need to add a constant value to + * the _BQC return value to get the actual current brightness level + */ + +static int bqc_offset_aml_bug_workaround; +static int __init video_set_bqc_offset(const struct dmi_system_id *d) +{ + bqc_offset_aml_bug_workaround = 9; + return 0; +} + +static struct dmi_system_id video_dmi_table[] __initdata = { + /* + * Broken _BQC workaround http://bugzilla.kernel.org/show_bug.cgi?id=13121 + */ + { + .callback = video_set_bqc_offset, + .ident = "Acer Aspire 5720", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5720"), + }, + }, + {} +}; + static int acpi_video_device_lcd_get_level_current(struct acpi_video_device *device, unsigned long long *level) @@ -557,6 +584,7 @@ acpi_video_device_lcd_get_level_current(struct acpi_video_device *device, *level = device->brightness->levels[*level + 2]; } + *level += bqc_offset_aml_bug_workaround; device->brightness->curr = *level; return 0; } else { @@ -2287,6 +2315,8 @@ EXPORT_SYMBOL(acpi_video_register); static int __init acpi_video_init(void) { + dmi_check_system(video_dmi_table); + if (intel_opregion_present()) return 0; -- cgit v1.2.3 From 51e95bed6263f6a2e558ca04fc4ff877f3b0cca3 Mon Sep 17 00:00:00 2001 From: David Rientjes Date: Fri, 24 Apr 2009 16:26:25 -0700 Subject: slub: add Documentation/ABI/testing/sysfs-kernel-slab Adds documentation for the slub ABI. This is placed in the `testing' directory since the meanings of these files are still subject to change as slub is developed. Acked-by: Christoph Lameter Cc: Randy Dunlap Signed-off-by: David Rientjes Signed-off-by: Pekka Enberg --- Documentation/ABI/testing/sysfs-kernel-slab | 479 ++++++++++++++++++++++++++++ 1 file changed, 479 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-kernel-slab diff --git a/Documentation/ABI/testing/sysfs-kernel-slab b/Documentation/ABI/testing/sysfs-kernel-slab new file mode 100644 index 00000000000..6dcf75e594f --- /dev/null +++ b/Documentation/ABI/testing/sysfs-kernel-slab @@ -0,0 +1,479 @@ +What: /sys/kernel/slab +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The /sys/kernel/slab directory contains a snapshot of the + internal state of the SLUB allocator for each cache. Certain + files may be modified to change the behavior of the cache (and + any cache it aliases, if any). +Users: kernel memory tuning tools + +What: /sys/kernel/slab/cache/aliases +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The aliases file is read-only and specifies how many caches + have merged into this cache. + +What: /sys/kernel/slab/cache/align +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The align file is read-only and specifies the cache's object + alignment in bytes. + +What: /sys/kernel/slab/cache/alloc_calls +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The alloc_calls file is read-only and lists the kernel code + locations from which allocations for this cache were performed. + The alloc_calls file only contains information if debugging is + enabled for that cache (see Documentation/vm/slub.txt). + +What: /sys/kernel/slab/cache/alloc_fastpath +Date: February 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The alloc_fastpath file is read-only and specifies how many + objects have been allocated using the fast path. + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab/cache/alloc_from_partial +Date: February 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The alloc_from_partial file is read-only and specifies how + many times a cpu slab has been full and it has been refilled + by using a slab from the list of partially used slabs. + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab/cache/alloc_refill +Date: February 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The alloc_refill file is read-only and specifies how many + times the per-cpu freelist was empty but there were objects + available as the result of remote cpu frees. + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab/cache/alloc_slab +Date: February 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The alloc_slab file is read-only and specifies how many times + a new slab had to be allocated from the page allocator. + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab/cache/alloc_slowpath +Date: February 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The alloc_slowpath file is read-only and specifies how many + objects have been allocated using the slow path because of a + refill or allocation from a partial or new slab. + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab/cache/cache_dma +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The cache_dma file is read-only and specifies whether objects + are from ZONE_DMA. + Available when CONFIG_ZONE_DMA is enabled. + +What: /sys/kernel/slab/cache/cpu_slabs +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The cpu_slabs file is read-only and displays how many cpu slabs + are active and their NUMA locality. + +What: /sys/kernel/slab/cache/cpuslab_flush +Date: April 2009 +KernelVersion: 2.6.31 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The file cpuslab_flush is read-only and specifies how many + times a cache's cpu slabs have been flushed as the result of + destroying or shrinking a cache, a cpu going offline, or as + the result of forcing an allocation from a certain node. + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab/cache/ctor +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The ctor file is read-only and specifies the cache's object + constructor function, which is invoked for each object when a + new slab is allocated. + +What: /sys/kernel/slab/cache/deactivate_empty +Date: February 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The file deactivate_empty is read-only and specifies how many + times an empty cpu slab was deactivated. + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab/cache/deactivate_full +Date: February 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The file deactivate_full is read-only and specifies how many + times a full cpu slab was deactivated. + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab/cache/deactivate_remote_frees +Date: February 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The file deactivate_remote_frees is read-only and specifies how + many times a cpu slab has been deactivated and contained free + objects that were freed remotely. + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab/cache/deactivate_to_head +Date: February 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The file deactivate_to_head is read-only and specifies how + many times a partial cpu slab was deactivated and added to the + head of its node's partial list. + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab/cache/deactivate_to_tail +Date: February 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The file deactivate_to_tail is read-only and specifies how + many times a partial cpu slab was deactivated and added to the + tail of its node's partial list. + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab/cache/destroy_by_rcu +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The destroy_by_rcu file is read-only and specifies whether + slabs (not objects) are freed by rcu. + +What: /sys/kernel/slab/cache/free_add_partial +Date: February 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The file free_add_partial is read-only and specifies how many + times an object has been freed in a full slab so that it had to + added to its node's partial list. + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab/cache/free_calls +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The free_calls file is read-only and lists the locations of + object frees if slab debugging is enabled (see + Documentation/vm/slub.txt). + +What: /sys/kernel/slab/cache/free_fastpath +Date: February 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The free_fastpath file is read-only and specifies how many + objects have been freed using the fast path because it was an + object from the cpu slab. + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab/cache/free_frozen +Date: February 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The free_frozen file is read-only and specifies how many + objects have been freed to a frozen slab (i.e. a remote cpu + slab). + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab/cache/free_remove_partial +Date: February 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The file free_remove_partial is read-only and specifies how + many times an object has been freed to a now-empty slab so + that it had to be removed from its node's partial list. + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab/cache/free_slab +Date: February 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The free_slab file is read-only and specifies how many times an + empty slab has been freed back to the page allocator. + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab/cache/free_slowpath +Date: February 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The free_slowpath file is read-only and specifies how many + objects have been freed using the slow path (i.e. to a full or + partial slab). + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab/cache/hwcache_align +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The hwcache_align file is read-only and specifies whether + objects are aligned on cachelines. + +What: /sys/kernel/slab/cache/min_partial +Date: February 2009 +KernelVersion: 2.6.30 +Contact: Pekka Enberg , + David Rientjes +Description: + The min_partial file specifies how many empty slabs shall + remain on a node's partial list to avoid the overhead of + allocating new slabs. Such slabs may be reclaimed by utilizing + the shrink file. + +What: /sys/kernel/slab/cache/object_size +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The object_size file is read-only and specifies the cache's + object size. + +What: /sys/kernel/slab/cache/objects +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The objects file is read-only and displays how many objects are + active and from which nodes they are from. + +What: /sys/kernel/slab/cache/objects_partial +Date: April 2008 +KernelVersion: 2.6.26 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The objects_partial file is read-only and displays how many + objects are on partial slabs and from which nodes they are + from. + +What: /sys/kernel/slab/cache/objs_per_slab +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The file objs_per_slab is read-only and specifies how many + objects may be allocated from a single slab of the order + specified in /sys/kernel/slab/cache/order. + +What: /sys/kernel/slab/cache/order +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The order file specifies the page order at which new slabs are + allocated. It is writable and can be changed to increase the + number of objects per slab. If a slab cannot be allocated + because of fragmentation, SLUB will retry with the minimum order + possible depending on its characteristics. + +What: /sys/kernel/slab/cache/order_fallback +Date: April 2008 +KernelVersion: 2.6.26 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The file order_fallback is read-only and specifies how many + times an allocation of a new slab has not been possible at the + cache's order and instead fallen back to its minimum possible + order. + Available when CONFIG_SLUB_STATS is enabled. + +What: /sys/kernel/slab/cache/partial +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The partial file is read-only and displays how long many + partial slabs there are and how long each node's list is. + +What: /sys/kernel/slab/cache/poison +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The poison file specifies whether objects should be poisoned + when a new slab is allocated. + +What: /sys/kernel/slab/cache/reclaim_account +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The reclaim_account file specifies whether the cache's objects + are reclaimable (and grouped by their mobility). + +What: /sys/kernel/slab/cache/red_zone +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The red_zone file specifies whether the cache's objects are red + zoned. + +What: /sys/kernel/slab/cache/remote_node_defrag_ratio +Date: January 2008 +KernelVersion: 2.6.25 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The file remote_node_defrag_ratio specifies the percentage of + times SLUB will attempt to refill the cpu slab with a partial + slab from a remote node as opposed to allocating a new slab on + the local node. This reduces the amount of wasted memory over + the entire system but can be expensive. + Available when CONFIG_NUMA is enabled. + +What: /sys/kernel/slab/cache/sanity_checks +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The sanity_checks file specifies whether expensive checks + should be performed on free and, at minimum, enables double free + checks. Caches that enable sanity_checks cannot be merged with + caches that do not. + +What: /sys/kernel/slab/cache/shrink +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The shrink file is written when memory should be reclaimed from + a cache. Empty partial slabs are freed and the partial list is + sorted so the slabs with the fewest available objects are used + first. + +What: /sys/kernel/slab/cache/slab_size +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The slab_size file is read-only and specifies the object size + with metadata (debugging information and alignment) in bytes. + +What: /sys/kernel/slab/cache/slabs +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The slabs file is read-only and displays how long many slabs + there are (both cpu and partial) and from which nodes they are + from. + +What: /sys/kernel/slab/cache/store_user +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The store_user file specifies whether the location of + allocation or free should be tracked for a cache. + +What: /sys/kernel/slab/cache/total_objects +Date: April 2008 +KernelVersion: 2.6.26 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The total_objects file is read-only and displays how many total + objects a cache has and from which nodes they are from. + +What: /sys/kernel/slab/cache/trace +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + The trace file specifies whether object allocations and frees + should be traced. + +What: /sys/kernel/slab/cache/validate +Date: May 2007 +KernelVersion: 2.6.22 +Contact: Pekka Enberg , + Christoph Lameter +Description: + Writing to the validate file causes SLUB to traverse all of its + cache's objects and check the validity of metadata. -- cgit v1.2.3 From 1eb5ac6466d4be7b15b38ce3ab709600f1bc891f Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Tue, 5 May 2009 19:13:44 +1000 Subject: mm: SLUB fix reclaim_state SLUB does not correctly account reclaim_state.reclaimed_slab, so it will break memory reclaim. Account it like SLAB does. Cc: stable@kernel.org Cc: linux-mm@kvack.org Cc: Matt Mackall Acked-by: Christoph Lameter Signed-off-by: Nick Piggin Signed-off-by: Pekka Enberg --- mm/slub.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/mm/slub.c b/mm/slub.c index 7ab54ecbd3f..aa34913a41e 100644 --- a/mm/slub.c +++ b/mm/slub.c @@ -9,6 +9,7 @@ */ #include +#include /* struct reclaim_state */ #include #include #include @@ -1170,6 +1171,8 @@ static void __free_slab(struct kmem_cache *s, struct page *page) __ClearPageSlab(page); reset_page_mapcount(page); + if (current->reclaim_state) + current->reclaim_state->reclaimed_slab += pages; __free_pages(page, order); } -- cgit v1.2.3 From 1f0532eb617d28f65c93593a1491f662f14f7eac Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Tue, 5 May 2009 19:13:45 +1000 Subject: mm: SLOB fix reclaim_state SLOB does not correctly account reclaim_state.reclaimed_slab, so it will break memory reclaim. Account it like SLAB does. Cc: stable@kernel.org Cc: linux-mm@kvack.org Acked-by: Matt Mackall Acked-by: Christoph Lameter Signed-off-by: Nick Piggin Signed-off-by: Pekka Enberg --- mm/slob.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/mm/slob.c b/mm/slob.c index a2d4ab32198..f92e66d558b 100644 --- a/mm/slob.c +++ b/mm/slob.c @@ -60,6 +60,7 @@ #include #include #include +#include /* struct reclaim_state */ #include #include #include @@ -255,6 +256,8 @@ static void *slob_new_pages(gfp_t gfp, int order, int node) static void slob_free_pages(void *b, int order) { + if (current->reclaim_state) + current->reclaim_state->reclaimed_slab += 1 << order; free_pages((unsigned long)b, order); } @@ -407,7 +410,7 @@ static void slob_free(void *block, int size) spin_unlock_irqrestore(&slob_lock, flags); clear_slob_page(sp); free_slob_page(sp); - free_page((unsigned long)b); + slob_free_pages(b, 0); return; } -- cgit v1.2.3 From 51991763416251f259efbfe459c16f331f31d01f Mon Sep 17 00:00:00 2001 From: Len Brown Date: Thu, 7 May 2009 15:24:31 -0400 Subject: ACPICA: use acpi.* modparam namespace Add acpi/acpica/*.c to the acpi.* modparam namespace so that any modparams we stick into ACPICA do not expose ACPICA filenames to users. There are currently only two modparams in ACPICA, just recently added for http://bugzilla.kernel.org/show_bug.cgi?id=13041 With this change, they become acpi.gts=1 acpi.bfs=1 rather than hwsleep.gts=1 hwsleep.bfs=1 Signed-off-by: Len Brown --- drivers/acpi/acpica/Makefile | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/drivers/acpi/acpica/Makefile b/drivers/acpi/acpica/Makefile index 17e50824a6f..72ac28da14e 100644 --- a/drivers/acpi/acpica/Makefile +++ b/drivers/acpi/acpica/Makefile @@ -5,40 +5,43 @@ ccflags-y := -Os ccflags-$(CONFIG_ACPI_DEBUG) += -DACPI_DEBUG_OUTPUT -obj-y := dsfield.o dsmthdat.o dsopcode.o dswexec.o dswscope.o \ +# use acpi.o to put all files here into acpi.o modparam namespace +obj-y += acpi.o + +acpi-y := dsfield.o dsmthdat.o dsopcode.o dswexec.o dswscope.o \ dsmethod.o dsobject.o dsutils.o dswload.o dswstate.o \ dsinit.o -obj-y += evevent.o evregion.o evsci.o evxfevnt.o \ +acpi-y += evevent.o evregion.o evsci.o evxfevnt.o \ evmisc.o evrgnini.o evxface.o evxfregn.o \ evgpe.o evgpeblk.o -obj-y += exconfig.o exfield.o exnames.o exoparg6.o exresolv.o exstorob.o\ +acpi-y += exconfig.o exfield.o exnames.o exoparg6.o exresolv.o exstorob.o\ exconvrt.o exfldio.o exoparg1.o exprep.o exresop.o exsystem.o\ excreate.o exmisc.o exoparg2.o exregion.o exstore.o exutils.o \ exdump.o exmutex.o exoparg3.o exresnte.o exstoren.o -obj-y += hwacpi.o hwgpe.o hwregs.o hwsleep.o hwxface.o hwvalid.o +acpi-y += hwacpi.o hwgpe.o hwregs.o hwsleep.o hwxface.o hwvalid.o -obj-$(ACPI_FUTURE_USAGE) += hwtimer.o +acpi-$(ACPI_FUTURE_USAGE) += hwtimer.o -obj-y += nsaccess.o nsload.o nssearch.o nsxfeval.o \ +acpi-y += nsaccess.o nsload.o nssearch.o nsxfeval.o \ nsalloc.o nseval.o nsnames.o nsutils.o nsxfname.o \ nsdump.o nsinit.o nsobject.o nswalk.o nsxfobj.o \ nsparse.o nspredef.o -obj-$(ACPI_FUTURE_USAGE) += nsdumpdv.o +acpi-$(ACPI_FUTURE_USAGE) += nsdumpdv.o -obj-y += psargs.o psparse.o psloop.o pstree.o pswalk.o \ +acpi-y += psargs.o psparse.o psloop.o pstree.o pswalk.o \ psopcode.o psscope.o psutils.o psxface.o -obj-y += rsaddr.o rscreate.o rsinfo.o rsio.o rslist.o rsmisc.o rsxface.o \ +acpi-y += rsaddr.o rscreate.o rsinfo.o rsio.o rslist.o rsmisc.o rsxface.o \ rscalc.o rsirq.o rsmemory.o rsutils.o -obj-$(ACPI_FUTURE_USAGE) += rsdump.o +acpi-$(ACPI_FUTURE_USAGE) += rsdump.o -obj-y += tbxface.o tbinstal.o tbutils.o tbfind.o tbfadt.o tbxfroot.o +acpi-y += tbxface.o tbinstal.o tbutils.o tbfind.o tbfadt.o tbxfroot.o -obj-y += utalloc.o utdebug.o uteval.o utinit.o utmisc.o utxface.o \ +acpi-y += utalloc.o utdebug.o uteval.o utinit.o utmisc.o utxface.o \ utcopy.o utdelete.o utglobal.o utmath.o utobject.o \ utstate.o utmutex.o utobject.o utresrc.o utlock.o -- cgit v1.2.3 From 5afc4abe7902b8453c248321daa9b13b12d9c838 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Thu, 7 May 2009 21:11:56 -0400 Subject: ACPI: video: DMI workaround another broken Acer BIOS enabling display brightness http://bugzilla.kernel.org/show_bug.cgi?id=13121 Signed-off-by: Len Brown --- drivers/acpi/video.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index 7e8ee49ebd4..3a3d1565a7d 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -562,6 +562,14 @@ static struct dmi_system_id video_dmi_table[] __initdata = { DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5720"), }, }, + { + .callback = video_set_bqc_offset, + .ident = "Acer Aspire 5710Z", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5710Z"), + }, + }, {} }; -- cgit v1.2.3 From ddc50b6ad634d9ce2526a777d4b7da80effdfb60 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Fri, 8 May 2009 00:07:30 -0400 Subject: ACPI: power: update error message "Transitioning device [%s] to D%d" is not correct. We print this line when we attempted to transition the device, and it failed. So instead, print "Device [%s] failed to transition to D%d\n" This can happen under two conditions: 1. acpi_power_transition() fails when trying to handle the _ON/_OFF for associated power resource. 2. acpi_evaluate_object() on the explicit _PS0/_PS3 for that actual device could fail. this change clarifies, but doesn't fix http://bugzilla.kernel.org/show_bug.cgi?id=13243 Signed-off-by: Len Brown --- drivers/acpi/bus.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c index e8f7b64e92d..ae862f1798d 100644 --- a/drivers/acpi/bus.c +++ b/drivers/acpi/bus.c @@ -312,7 +312,7 @@ int acpi_bus_set_power(acpi_handle handle, int state) end: if (result) printk(KERN_WARNING PREFIX - "Transitioning device [%s] to D%d\n", + "Device [%s] failed to transition to D%d\n", device->pnp.bus_id, state); else { device->power.state = state; -- cgit v1.2.3 From 19bde778c1fd2574cc020a618d7d576f260271ca Mon Sep 17 00:00:00 2001 From: Len Brown Date: Fri, 8 May 2009 00:22:29 -0400 Subject: ACPI: suspend: don't let device _PS3 failure prevent suspend 6328a57401dc5f5cf9931738eb7268fcd8058c49 "Enable PNPACPI _PSx Support, v3" added a call to acpi_bus_set_power(handle, ACPI_STATE_D3) to pnpacpi_disable_resource() before the existing call to evaluate _DIS on the device. This caused suspend to fail on the system in http://bugzilla.kernel.org/show_bug.cgi?id=13243 because the sanity check to verify we entered _PS3 failed on the serial port. As a work-around, that sanity check can be disabled system-wide with "acpi.power_nocheck=1" Or perhaps we should just shrug off the _PS3 failure and carry on with _DIS like we used to -- which is what this patch does. Signed-off-by: Len Brown --- drivers/pnp/pnpacpi/core.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/drivers/pnp/pnpacpi/core.c b/drivers/pnp/pnpacpi/core.c index 9a3a682c698..9496494f340 100644 --- a/drivers/pnp/pnpacpi/core.c +++ b/drivers/pnp/pnpacpi/core.c @@ -110,11 +110,9 @@ static int pnpacpi_disable_resources(struct pnp_dev *dev) /* acpi_unregister_gsi(pnp_irq(dev, 0)); */ ret = 0; - if (acpi_bus_power_manageable(handle)) { - ret = acpi_bus_set_power(handle, ACPI_STATE_D3); - if (ret) - return ret; - } + if (acpi_bus_power_manageable(handle)) + acpi_bus_set_power(handle, ACPI_STATE_D3); + /* continue even if acpi_bus_set_power() fails */ if (ACPI_FAILURE(acpi_evaluate_object(handle, "_DIS", NULL, NULL))) ret = -ENODEV; return ret; -- cgit v1.2.3 From 92d23f703c608fcb2c8edd74a3fd0f4031e18606 Mon Sep 17 00:00:00 2001 From: Ron Date: Fri, 8 May 2009 22:54:49 +0930 Subject: sched: Fix fallback sched_clock()'s offset when using jiffies Account for the initial offset to the jiffy count. [ Impact: fix printk timestamps on architectures using fallback sched_clock() ] Signed-off-by: Ron Lee Cc: Andrew Morton Signed-off-by: Ingo Molnar --- kernel/sched_clock.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/kernel/sched_clock.c b/kernel/sched_clock.c index 819f17ac796..e1d16c9a768 100644 --- a/kernel/sched_clock.c +++ b/kernel/sched_clock.c @@ -38,7 +38,8 @@ */ unsigned long long __attribute__((weak)) sched_clock(void) { - return (unsigned long long)jiffies * (NSEC_PER_SEC / HZ); + return (unsigned long long)(jiffies - INITIAL_JIFFIES) + * (NSEC_PER_SEC / HZ); } static __read_mostly int sched_clock_running; -- cgit v1.2.3 From b74d446f1f337e3fe906169a3266cb65ffa4179e Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Sat, 9 May 2009 15:35:10 +0600 Subject: x86: Fix false positive section mismatch warnings in the apic code [ Impact: reduce kernel image size a bit, annotate away warnings ] Signed-off-by: Sam Ravnborg [ modified and tested it ] Signed-off-by: Rakib Mullick Cc: Marcin Slusarz LKML-Reference: Signed-off-by: Ingo Molnar --- arch/x86/kernel/apic/es7000_32.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/x86/kernel/apic/es7000_32.c b/arch/x86/kernel/apic/es7000_32.c index 1c11b819f24..30294777557 100644 --- a/arch/x86/kernel/apic/es7000_32.c +++ b/arch/x86/kernel/apic/es7000_32.c @@ -254,7 +254,7 @@ static int parse_unisys_oem(char *oemptr) } #ifdef CONFIG_ACPI -static int find_unisys_acpi_oem_table(unsigned long *oem_addr) +static int __init find_unisys_acpi_oem_table(unsigned long *oem_addr) { struct acpi_table_header *header = NULL; struct es7000_oem_table *table; @@ -285,7 +285,7 @@ static int find_unisys_acpi_oem_table(unsigned long *oem_addr) return 0; } -static void unmap_unisys_acpi_oem_table(unsigned long oem_addr) +static void __init unmap_unisys_acpi_oem_table(unsigned long oem_addr) { if (!oem_addr) return; @@ -306,7 +306,7 @@ static int es7000_check_dsdt(void) static int es7000_acpi_ret; /* Hook from generic ACPI tables.c */ -static int es7000_acpi_madt_oem_check(char *oem_id, char *oem_table_id) +static int __init es7000_acpi_madt_oem_check(char *oem_id, char *oem_table_id) { unsigned long oem_addr = 0; int check_dsdt; @@ -717,7 +717,7 @@ struct apic apic_es7000_cluster = { .safe_wait_icr_idle = native_safe_apic_wait_icr_idle, }; -struct apic apic_es7000 = { +struct apic __refdata apic_es7000 = { .name = "es7000", .probe = probe_es7000, -- cgit v1.2.3 From 917a0153621572e88aeb2d5df025ad2e81027287 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Wed, 6 May 2009 21:36:16 -0700 Subject: x86: mtrr: Fix high_width computation when phys-addr is >= 44bit found one system where cpu address line is 44bits, mtrr printout is not right: [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0 00000000 mask FF0 00000000 write-back [ 0.000000] 1 base 10 00000000 mask FFF 80000000 write-back [ 0.000000] 2 base 0 80000000 mask FFF 80000000 uncachable [ 0.000000] 3 base 0 7F800000 mask FFF FF800000 uncachable Li Zefan and Frederic pointed out the high_width could be -4 some how. It turns out when phys_addr is 44bit, size_or_mask will be ffffffff,00000000 so ffs(size_or_mask) will be 0. Try to check low 32 bit, to get correct high_width. Signed-off-by: Yinghai Lu Also-analyzed-by: Frederic Weisbecker Also-analyzed-by: Li Zefan Cc: Jeremy Fitzhardinge Cc: Zhaolei Cc: Steven Rostedt Cc: Vegard Nossum Cc: Andrew Morton LKML-Reference: <4A026540.8060504@kernel.org> Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/mtrr/generic.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/arch/x86/kernel/cpu/mtrr/generic.c b/arch/x86/kernel/cpu/mtrr/generic.c index 0b776c09aff..d21d4fb161f 100644 --- a/arch/x86/kernel/cpu/mtrr/generic.c +++ b/arch/x86/kernel/cpu/mtrr/generic.c @@ -275,7 +275,11 @@ static void __init print_mtrr_state(void) } printk(KERN_DEBUG "MTRR variable ranges %sabled:\n", mtrr_state.enabled & 2 ? "en" : "dis"); - high_width = ((size_or_mask ? ffs(size_or_mask) - 1 : 32) - (32 - PAGE_SHIFT) + 3) / 4; + if (size_or_mask & 0xffffffffUL) + high_width = ffs(size_or_mask & 0xffffffffUL) - 1; + else + high_width = ffs(size_or_mask>>32) + 32 - 1; + high_width = (high_width - (32 - PAGE_SHIFT) + 3) / 4; for (i = 0; i < num_var_ranges; ++i) { if (mtrr_state.var_ranges[i].mask_lo & (1 << 11)) printk(KERN_DEBUG " %u base %0*X%05X000 mask %0*X%05X000 %s\n", -- cgit v1.2.3 From 3c598766a2bae1b208470e7cc934ac462561e3cb Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Mon, 11 May 2009 16:49:28 +0100 Subject: x86: fix percpu_{to,from}_op() - the byte operand constraints were wrong for 32-bit - the to-op's input operands weren't properly parenthesized [ Impact: fix possible miscompilation or build failure ] Signed-off-by: Jan Beulich Signed-off-by: H. Peter Anvin --- arch/x86/include/asm/percpu.h | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/x86/include/asm/percpu.h b/arch/x86/include/asm/percpu.h index aee103b26d0..02ecb30982a 100644 --- a/arch/x86/include/asm/percpu.h +++ b/arch/x86/include/asm/percpu.h @@ -82,22 +82,22 @@ do { \ case 1: \ asm(op "b %1,"__percpu_arg(0) \ : "+m" (var) \ - : "ri" ((T__)val)); \ + : "qi" ((T__)(val))); \ break; \ case 2: \ asm(op "w %1,"__percpu_arg(0) \ : "+m" (var) \ - : "ri" ((T__)val)); \ + : "ri" ((T__)(val))); \ break; \ case 4: \ asm(op "l %1,"__percpu_arg(0) \ : "+m" (var) \ - : "ri" ((T__)val)); \ + : "ri" ((T__)(val))); \ break; \ case 8: \ asm(op "q %1,"__percpu_arg(0) \ : "+m" (var) \ - : "re" ((T__)val)); \ + : "re" ((T__)(val))); \ break; \ default: __bad_percpu_size(); \ } \ @@ -109,7 +109,7 @@ do { \ switch (sizeof(var)) { \ case 1: \ asm(op "b "__percpu_arg(1)",%0" \ - : "=r" (ret__) \ + : "=q" (ret__) \ : "m" (var)); \ break; \ case 2: \ -- cgit v1.2.3 From 72af2b363107df9cd67985ecb8495bbdff3c9857 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Mon, 11 May 2009 09:58:19 -0700 Subject: ARM: OMAP: Fix printing of reserved memory for frambuffer Print reserved memory only if it was actually reserved. Signed-off-by: Tomi Valkeinen Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/fb.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c index ce6b4baeede..3746222bed1 100644 --- a/arch/arm/plat-omap/fb.c +++ b/arch/arm/plat-omap/fb.c @@ -206,9 +206,10 @@ void __init omapfb_reserve_sdram(void) config_invalid = 1; return; } - if (rg.paddr) + if (rg.paddr) { reserve_bootmem(rg.paddr, rg.size, BOOTMEM_DEFAULT); - reserved += rg.size; + reserved += rg.size; + } omapfb_config.mem_desc.region[i] = rg; configured_regions++; } -- cgit v1.2.3 From 7b6c6c77732ca1d2498eda7eabb64f9648896e96 Mon Sep 17 00:00:00 2001 From: Masami Hiramatsu Date: Mon, 11 May 2009 17:03:00 -0400 Subject: x86, 32-bit: fix kernel_trap_sp() Use ®s->sp instead of regs for getting the top of stack in kernel mode. (on x86-64, regs->sp always points the top of stack) [ Impact: Oprofile decodes only stack for backtracing on i386 ] Signed-off-by: Masami Hiramatsu [ v2: rename the API to kernel_stack_pointer(), move variable inside ] Acked-by: Linus Torvalds Cc: systemtap@sources.redhat.com Cc: Harvey Harrison Cc: Jan Blunck Cc: Christoph Hellwig LKML-Reference: <20090511210300.17332.67549.stgit@localhost.localdomain> Signed-off-by: Ingo Molnar --- arch/x86/include/asm/ptrace.h | 7 ++++--- arch/x86/oprofile/backtrace.c | 2 +- 2 files changed, 5 insertions(+), 4 deletions(-) diff --git a/arch/x86/include/asm/ptrace.h b/arch/x86/include/asm/ptrace.h index e304b66abee..624f133943e 100644 --- a/arch/x86/include/asm/ptrace.h +++ b/arch/x86/include/asm/ptrace.h @@ -187,14 +187,15 @@ static inline int v8086_mode(struct pt_regs *regs) /* * X86_32 CPUs don't save ss and esp if the CPU is already in kernel mode - * when it traps. So regs will be the current sp. + * when it traps. The previous stack will be directly underneath the saved + * registers, and 'sp/ss' won't even have been saved. Thus the '®s->sp'. * * This is valid only for kernel mode traps. */ -static inline unsigned long kernel_trap_sp(struct pt_regs *regs) +static inline unsigned long kernel_stack_pointer(struct pt_regs *regs) { #ifdef CONFIG_X86_32 - return (unsigned long)regs; + return (unsigned long)(®s->sp); #else return regs->sp; #endif diff --git a/arch/x86/oprofile/backtrace.c b/arch/x86/oprofile/backtrace.c index 04df67f8a7b..044897be021 100644 --- a/arch/x86/oprofile/backtrace.c +++ b/arch/x86/oprofile/backtrace.c @@ -76,9 +76,9 @@ void x86_backtrace(struct pt_regs * const regs, unsigned int depth) { struct frame_head *head = (struct frame_head *)frame_pointer(regs); - unsigned long stack = kernel_trap_sp(regs); if (!user_mode_vm(regs)) { + unsigned long stack = kernel_stack_pointer(regs); if (depth) dump_trace(NULL, regs, (unsigned long *)stack, 0, &backtrace_ops, &depth); -- cgit v1.2.3 From d80c19df5fcceb8c741e96f09f275c2da719efef Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Tue, 12 May 2009 16:29:13 +0200 Subject: lockdep: increase MAX_LOCKDEP_ENTRIES and MAX_LOCKDEP_CHAINS Now that lockdep coverage has increased it has become easier to run out of entries: [ 21.401387] BUG: MAX_LOCKDEP_ENTRIES too low! [ 21.402007] turning off the locking correctness validator. [ 21.402007] Pid: 1555, comm: S99local Not tainted 2.6.30-rc5-tip #2 [ 21.402007] Call Trace: [ 21.402007] [] add_lock_to_list+0x53/0xba [ 21.402007] [] ? lookup_mnt+0x19/0x53 [ 21.402007] [] check_prev_add+0x14b/0x1c7 [ 21.402007] [] validate_chain+0x474/0x52a [ 21.402007] [] __lock_acquire+0x342/0x3c7 [ 21.402007] [] lock_acquire+0xc1/0xe5 [ 21.402007] [] ? lookup_mnt+0x19/0x53 [ 21.402007] [] _spin_lock+0x31/0x66 Double the size - as we've done in the past. [ Impact: allow lockdep to cover more locks ] Acked-by: Peter Zijlstra LKML-Reference: Signed-off-by: Ingo Molnar --- kernel/lockdep_internals.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/kernel/lockdep_internals.h b/kernel/lockdep_internals.h index a2cc7e9a6e8..699a2ac3a0d 100644 --- a/kernel/lockdep_internals.h +++ b/kernel/lockdep_internals.h @@ -54,9 +54,9 @@ enum { * table (if it's not there yet), and we check it for lock order * conflicts and deadlocks. */ -#define MAX_LOCKDEP_ENTRIES 8192UL +#define MAX_LOCKDEP_ENTRIES 16384UL -#define MAX_LOCKDEP_CHAINS_BITS 14 +#define MAX_LOCKDEP_CHAINS_BITS 15 #define MAX_LOCKDEP_CHAINS (1UL << MAX_LOCKDEP_CHAINS_BITS) #define MAX_LOCKDEP_CHAIN_HLOCKS (MAX_LOCKDEP_CHAINS*5) -- cgit v1.2.3 From 6f733a349c2b70a83b5451fbe61ef2cf67d41cdf Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Mon, 11 May 2009 09:58:19 -0700 Subject: ARM: OMAP: GPIO de-bounce clocks don't affect module idle state GPIO de-bounce clocks don't have any impact on the module idle state, so the clock code should not wait for the module to enable after the de-bounce clocks are enabled. Problem found by Kevin Hilman . Signed-off-by: Paul Walmsley Signed-off-by: Kevin Hilman Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/clock34xx.h | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h index 6763b8f7302..017a30e9aa1 100644 --- a/arch/arm/mach-omap2/clock34xx.h +++ b/arch/arm/mach-omap2/clock34xx.h @@ -2182,7 +2182,7 @@ static struct clk wkup_32k_fck = { static struct clk gpio1_dbck = { .name = "gpio1_dbck", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, .parent = &wkup_32k_fck, .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_GPIO1_SHIFT, @@ -2427,7 +2427,7 @@ static struct clk per_32k_alwon_fck = { static struct clk gpio6_dbck = { .name = "gpio6_dbck", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, .parent = &per_32k_alwon_fck, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_GPIO6_SHIFT, @@ -2437,7 +2437,7 @@ static struct clk gpio6_dbck = { static struct clk gpio5_dbck = { .name = "gpio5_dbck", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, .parent = &per_32k_alwon_fck, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_GPIO5_SHIFT, @@ -2447,7 +2447,7 @@ static struct clk gpio5_dbck = { static struct clk gpio4_dbck = { .name = "gpio4_dbck", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, .parent = &per_32k_alwon_fck, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_GPIO4_SHIFT, @@ -2457,7 +2457,7 @@ static struct clk gpio4_dbck = { static struct clk gpio3_dbck = { .name = "gpio3_dbck", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, .parent = &per_32k_alwon_fck, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_GPIO3_SHIFT, @@ -2467,7 +2467,7 @@ static struct clk gpio3_dbck = { static struct clk gpio2_dbck = { .name = "gpio2_dbck", - .ops = &clkops_omap2_dflt_wait, + .ops = &clkops_omap2_dflt, .parent = &per_32k_alwon_fck, .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), .enable_bit = OMAP3430_EN_GPIO2_SHIFT, -- cgit v1.2.3 From eaf9393bb79a9c7c8e708669f9581ca466122430 Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Tue, 12 May 2009 11:20:02 -0700 Subject: ARM: OMAP2: Fix tusb6010 init error and compilation warning Fix "tusb6010 init error 5, -19" and compilation warning from function tusb6010_platform_retime "warning: 'sysclk_ps' is used uninitialized in this function". I suppose commit c094ba34b8f780885d029ce3c2715a194b780e5d was meant to test for zero fclk_ps instead of sysclk_ps. Signed-off-by: Jarkko Nikula Cc: Roel Kluin Tested-by: Kalle Valo Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/usb-tusb6010.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c index 8df55f40f4c..8622c24cd27 100644 --- a/arch/arm/mach-omap2/usb-tusb6010.c +++ b/arch/arm/mach-omap2/usb-tusb6010.c @@ -187,7 +187,7 @@ int tusb6010_platform_retime(unsigned is_refclk) unsigned sysclk_ps; int status; - if (!refclk_psec || sysclk_ps == 0) + if (!refclk_psec || fclk_ps == 0) return -ENODEV; sysclk_ps = is_refclk ? refclk_psec : TUSB6010_OSCCLK_60; -- cgit v1.2.3 From c8a799b03a981b4b27d8fd7320c96cfbe781b2fb Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Tue, 12 May 2009 11:20:02 -0700 Subject: ARM: OMAP2: Fix SPI driver failure on 2420 when running multi-omap config SPI driver will do unhandled fault on OMAP2420 if trying to probe non-existing SPI busses. Register those additional busses runtime only for cpus having them. Signed-off-by: Jarkko Nikula Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/devices.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 496983ade97..894cc355818 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -354,10 +354,12 @@ static void omap_init_mcspi(void) platform_device_register(&omap2_mcspi1); platform_device_register(&omap2_mcspi2); #if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) - platform_device_register(&omap2_mcspi3); + if (cpu_is_omap2430() || cpu_is_omap343x()) + platform_device_register(&omap2_mcspi3); #endif #ifdef CONFIG_ARCH_OMAP3 - platform_device_register(&omap2_mcspi4); + if (cpu_is_omap343x()) + platform_device_register(&omap2_mcspi4); #endif } -- cgit v1.2.3 From 4ea60b0c7a8487af5de736d394b147baf7691f3c Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 12 May 2009 11:20:03 -0700 Subject: ARM: OMAP2/3: Add name for musb clocks With the clkdev, musb_core.c needs to register clock with name "ick". Once all the platforms using the musb driver have been converted to use clockdev, the clock name does not need to be passed from the low-level init code. Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/clock24xx.c | 2 +- arch/arm/mach-omap2/clock34xx.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c index efc59c49341..ff9b4c0b00a 100644 --- a/arch/arm/mach-omap2/clock24xx.c +++ b/arch/arm/mach-omap2/clock24xx.c @@ -206,7 +206,7 @@ static struct omap_clk omap24xx_clks[] = { CLK(NULL, "aes_ick", &aes_ick, CK_243X | CK_242X), CLK(NULL, "pka_ick", &pka_ick, CK_243X | CK_242X), CLK(NULL, "usb_fck", &usb_fck, CK_243X | CK_242X), - CLK(NULL, "usbhs_ick", &usbhs_ick, CK_243X), + CLK("musb_hdrc", "ick", &usbhs_ick, CK_243X), CLK("mmci-omap-hs.0", "ick", &mmchs1_ick, CK_243X), CLK("mmci-omap-hs.0", "fck", &mmchs1_fck, CK_243X), CLK("mmci-omap-hs.1", "ick", &mmchs2_ick, CK_243X), diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c index 0a14dca31e3..a0575393d0e 100644 --- a/arch/arm/mach-omap2/clock34xx.c +++ b/arch/arm/mach-omap2/clock34xx.c @@ -157,7 +157,7 @@ static struct omap_clk omap34xx_clks[] = { CLK(NULL, "ssi_ssr_fck", &ssi_ssr_fck, CK_343X), CLK(NULL, "ssi_sst_fck", &ssi_sst_fck, CK_343X), CLK(NULL, "core_l3_ick", &core_l3_ick, CK_343X), - CLK(NULL, "hsotgusb_ick", &hsotgusb_ick, CK_343X), + CLK("musb_hdrc", "ick", &hsotgusb_ick, CK_343X), CLK(NULL, "sdrc_ick", &sdrc_ick, CK_343X), CLK(NULL, "gpmc_fck", &gpmc_fck, CK_343X), CLK(NULL, "security_l3_ick", &security_l3_ick, CK_343X), -- cgit v1.2.3 From 44408ad7368906c84000e87a99c14a16dbb867fd Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 12 May 2009 13:31:40 -0700 Subject: xen: use header for EXPORT_SYMBOL_GPL mmu.c needs to #include module.h to prevent these warnings: arch/x86/xen/mmu.c:239: warning: data definition has no type or storage class arch/x86/xen/mmu.c:239: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' arch/x86/xen/mmu.c:239: warning: parameter names (without types) in function declaration [ Impact: cleanup ] Signed-off-by: Randy Dunlap Acked-by: Jeremy Fitzhardinge Signed-off-by: Andrew Morton LKML-Reference: Signed-off-by: Ingo Molnar --- arch/x86/xen/mmu.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index e25a78e1113..fba55b1a402 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -42,6 +42,7 @@ #include #include #include +#include #include #include -- cgit v1.2.3 From aa512a27e9e8ed32f31b15eec67ab1ceca33839b Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Wed, 13 May 2009 13:52:19 -0400 Subject: x86/function-graph: fix constraint for recording old return value After upgrading from gcc 4.2.2 to 4.4.0, the function graph tracer broke. Investigating, I found that in the asm that replaces the return value, gcc was using the same register for the old value as it was for the new value. mov (addr), old mov new, (addr) But if old and new are the same register, we clobber new with old! I first thought this was a bug in gcc 4.4.0 and reported it: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=40132 Andrew Pinski responded (quickly), saying that it was correct gcc behavior and the code needed to denote old as an "early clobber". Instead of "=r"(old), we need "=&r"(old). [Impact: keep function graph tracer from breaking with gcc 4.4.0 ] Signed-off-by: Steven Rostedt --- arch/x86/kernel/ftrace.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/ftrace.c b/arch/x86/kernel/ftrace.c index 18dfa30795c..b79c5533c42 100644 --- a/arch/x86/kernel/ftrace.c +++ b/arch/x86/kernel/ftrace.c @@ -442,7 +442,7 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr) _ASM_EXTABLE(1b, 4b) _ASM_EXTABLE(2b, 4b) - : [old] "=r" (old), [faulted] "=r" (faulted) + : [old] "=&r" (old), [faulted] "=r" (faulted) : [parent] "r" (parent), [return_hooker] "r" (return_hooker) : "memory" ); -- cgit v1.2.3 From 5df6d737dd4b0fe9eccf943abb3677cfea05a6c4 Mon Sep 17 00:00:00 2001 From: Abhijeet Joglekar Date: Fri, 17 Apr 2009 18:33:26 -0700 Subject: [SCSI] fnic: Add new Cisco PCI-Express FCoE HBA fnic is a driver for the Cisco PCI-Express FCoE HBA Signed-off-by: Abhijeet Joglekar Signed-off-by: Joe Eykholt Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- MAINTAINERS | 8 + drivers/scsi/Kconfig | 11 + drivers/scsi/Makefile | 1 + drivers/scsi/fnic/Makefile | 15 + drivers/scsi/fnic/cq_desc.h | 78 ++ drivers/scsi/fnic/cq_enet_desc.h | 167 ++++ drivers/scsi/fnic/cq_exch_desc.h | 182 ++++ drivers/scsi/fnic/fcpio.h | 780 ++++++++++++++++ drivers/scsi/fnic/fnic.h | 265 ++++++ drivers/scsi/fnic/fnic_attrs.c | 56 ++ drivers/scsi/fnic/fnic_fcs.c | 742 +++++++++++++++ drivers/scsi/fnic/fnic_io.h | 67 ++ drivers/scsi/fnic/fnic_isr.c | 332 +++++++ drivers/scsi/fnic/fnic_main.c | 942 +++++++++++++++++++ drivers/scsi/fnic/fnic_res.c | 444 +++++++++ drivers/scsi/fnic/fnic_res.h | 197 ++++ drivers/scsi/fnic/fnic_scsi.c | 1850 +++++++++++++++++++++++++++++++++++++ drivers/scsi/fnic/rq_enet_desc.h | 58 ++ drivers/scsi/fnic/vnic_cq.c | 85 ++ drivers/scsi/fnic/vnic_cq.h | 121 +++ drivers/scsi/fnic/vnic_cq_copy.h | 62 ++ drivers/scsi/fnic/vnic_dev.c | 690 ++++++++++++++ drivers/scsi/fnic/vnic_dev.h | 161 ++++ drivers/scsi/fnic/vnic_devcmd.h | 281 ++++++ drivers/scsi/fnic/vnic_intr.c | 60 ++ drivers/scsi/fnic/vnic_intr.h | 118 +++ drivers/scsi/fnic/vnic_nic.h | 69 ++ drivers/scsi/fnic/vnic_resource.h | 61 ++ drivers/scsi/fnic/vnic_rq.c | 196 ++++ drivers/scsi/fnic/vnic_rq.h | 235 +++++ drivers/scsi/fnic/vnic_scsi.h | 99 ++ drivers/scsi/fnic/vnic_stats.h | 68 ++ drivers/scsi/fnic/vnic_wq.c | 182 ++++ drivers/scsi/fnic/vnic_wq.h | 175 ++++ drivers/scsi/fnic/vnic_wq_copy.c | 117 +++ drivers/scsi/fnic/vnic_wq_copy.h | 128 +++ drivers/scsi/fnic/wq_enet_desc.h | 96 ++ 37 files changed, 9199 insertions(+) create mode 100644 drivers/scsi/fnic/Makefile create mode 100644 drivers/scsi/fnic/cq_desc.h create mode 100644 drivers/scsi/fnic/cq_enet_desc.h create mode 100644 drivers/scsi/fnic/cq_exch_desc.h create mode 100644 drivers/scsi/fnic/fcpio.h create mode 100644 drivers/scsi/fnic/fnic.h create mode 100644 drivers/scsi/fnic/fnic_attrs.c create mode 100644 drivers/scsi/fnic/fnic_fcs.c create mode 100644 drivers/scsi/fnic/fnic_io.h create mode 100644 drivers/scsi/fnic/fnic_isr.c create mode 100644 drivers/scsi/fnic/fnic_main.c create mode 100644 drivers/scsi/fnic/fnic_res.c create mode 100644 drivers/scsi/fnic/fnic_res.h create mode 100644 drivers/scsi/fnic/fnic_scsi.c create mode 100644 drivers/scsi/fnic/rq_enet_desc.h create mode 100644 drivers/scsi/fnic/vnic_cq.c create mode 100644 drivers/scsi/fnic/vnic_cq.h create mode 100644 drivers/scsi/fnic/vnic_cq_copy.h create mode 100644 drivers/scsi/fnic/vnic_dev.c create mode 100644 drivers/scsi/fnic/vnic_dev.h create mode 100644 drivers/scsi/fnic/vnic_devcmd.h create mode 100644 drivers/scsi/fnic/vnic_intr.c create mode 100644 drivers/scsi/fnic/vnic_intr.h create mode 100644 drivers/scsi/fnic/vnic_nic.h create mode 100644 drivers/scsi/fnic/vnic_resource.h create mode 100644 drivers/scsi/fnic/vnic_rq.c create mode 100644 drivers/scsi/fnic/vnic_rq.h create mode 100644 drivers/scsi/fnic/vnic_scsi.h create mode 100644 drivers/scsi/fnic/vnic_stats.h create mode 100644 drivers/scsi/fnic/vnic_wq.c create mode 100644 drivers/scsi/fnic/vnic_wq.h create mode 100644 drivers/scsi/fnic/vnic_wq_copy.c create mode 100644 drivers/scsi/fnic/vnic_wq_copy.h create mode 100644 drivers/scsi/fnic/wq_enet_desc.h diff --git a/MAINTAINERS b/MAINTAINERS index 2b349ba4add..c7bed166ad6 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1431,6 +1431,14 @@ P: Russell King M: linux@arm.linux.org.uk F: include/linux/clk.h +CISCO FCOE HBA DRIVER +P: Abhijeet Joglekar +M: abjoglek@cisco.com +P: Joe Eykholt +M: jeykholt@cisco.com +L: linux-scsi@vger.kernel.org +S: Supported + CODA FILE SYSTEM P: Jan Harkes M: jaharkes@cs.cmu.edu diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 8ed2990c826..fb2740789b6 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -628,6 +628,17 @@ config FCOE ---help--- Fibre Channel over Ethernet module +config FCOE_FNIC + tristate "Cisco FNIC Driver" + depends on PCI && X86 + select LIBFC + help + This is support for the Cisco PCI-Express FCoE HBA. + + To compile this driver as a module, choose M here and read + . + The module will be called fnic. + config SCSI_DMX3191D tristate "DMX3191D SCSI support" depends on PCI && SCSI diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile index e7c861ac417..a5049cfb40e 100644 --- a/drivers/scsi/Makefile +++ b/drivers/scsi/Makefile @@ -39,6 +39,7 @@ obj-$(CONFIG_SCSI_DH) += device_handler/ obj-$(CONFIG_LIBFC) += libfc/ obj-$(CONFIG_LIBFCOE) += fcoe/ obj-$(CONFIG_FCOE) += fcoe/ +obj-$(CONFIG_FCOE_FNIC) += fnic/ obj-$(CONFIG_ISCSI_TCP) += libiscsi.o libiscsi_tcp.o iscsi_tcp.o obj-$(CONFIG_INFINIBAND_ISER) += libiscsi.o obj-$(CONFIG_SCSI_A4000T) += 53c700.o a4000t.o diff --git a/drivers/scsi/fnic/Makefile b/drivers/scsi/fnic/Makefile new file mode 100644 index 00000000000..37c3440bc17 --- /dev/null +++ b/drivers/scsi/fnic/Makefile @@ -0,0 +1,15 @@ +obj-$(CONFIG_FCOE_FNIC) += fnic.o + +fnic-y := \ + fnic_attrs.o \ + fnic_isr.o \ + fnic_main.o \ + fnic_res.o \ + fnic_fcs.o \ + fnic_scsi.o \ + vnic_cq.o \ + vnic_dev.o \ + vnic_intr.o \ + vnic_rq.o \ + vnic_wq_copy.o \ + vnic_wq.o diff --git a/drivers/scsi/fnic/cq_desc.h b/drivers/scsi/fnic/cq_desc.h new file mode 100644 index 00000000000..d1225cf6320 --- /dev/null +++ b/drivers/scsi/fnic/cq_desc.h @@ -0,0 +1,78 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef _CQ_DESC_H_ +#define _CQ_DESC_H_ + +/* + * Completion queue descriptor types + */ +enum cq_desc_types { + CQ_DESC_TYPE_WQ_ENET = 0, + CQ_DESC_TYPE_DESC_COPY = 1, + CQ_DESC_TYPE_WQ_EXCH = 2, + CQ_DESC_TYPE_RQ_ENET = 3, + CQ_DESC_TYPE_RQ_FCP = 4, +}; + +/* Completion queue descriptor: 16B + * + * All completion queues have this basic layout. The + * type_specfic area is unique for each completion + * queue type. + */ +struct cq_desc { + __le16 completed_index; + __le16 q_number; + u8 type_specfic[11]; + u8 type_color; +}; + +#define CQ_DESC_TYPE_BITS 4 +#define CQ_DESC_TYPE_MASK ((1 << CQ_DESC_TYPE_BITS) - 1) +#define CQ_DESC_COLOR_MASK 1 +#define CQ_DESC_COLOR_SHIFT 7 +#define CQ_DESC_Q_NUM_BITS 10 +#define CQ_DESC_Q_NUM_MASK ((1 << CQ_DESC_Q_NUM_BITS) - 1) +#define CQ_DESC_COMP_NDX_BITS 12 +#define CQ_DESC_COMP_NDX_MASK ((1 << CQ_DESC_COMP_NDX_BITS) - 1) + +static inline void cq_desc_dec(const struct cq_desc *desc_arg, + u8 *type, u8 *color, u16 *q_number, u16 *completed_index) +{ + const struct cq_desc *desc = desc_arg; + const u8 type_color = desc->type_color; + + *color = (type_color >> CQ_DESC_COLOR_SHIFT) & CQ_DESC_COLOR_MASK; + + /* + * Make sure color bit is read from desc *before* other fields + * are read from desc. Hardware guarantees color bit is last + * bit (byte) written. Adding the rmb() prevents the compiler + * and/or CPU from reordering the reads which would potentially + * result in reading stale values. + */ + + rmb(); + + *type = type_color & CQ_DESC_TYPE_MASK; + *q_number = le16_to_cpu(desc->q_number) & CQ_DESC_Q_NUM_MASK; + *completed_index = le16_to_cpu(desc->completed_index) & + CQ_DESC_COMP_NDX_MASK; +} + +#endif /* _CQ_DESC_H_ */ diff --git a/drivers/scsi/fnic/cq_enet_desc.h b/drivers/scsi/fnic/cq_enet_desc.h new file mode 100644 index 00000000000..a9fa26f82dd --- /dev/null +++ b/drivers/scsi/fnic/cq_enet_desc.h @@ -0,0 +1,167 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef _CQ_ENET_DESC_H_ +#define _CQ_ENET_DESC_H_ + +#include "cq_desc.h" + +/* Ethernet completion queue descriptor: 16B */ +struct cq_enet_wq_desc { + __le16 completed_index; + __le16 q_number; + u8 reserved[11]; + u8 type_color; +}; + +static inline void cq_enet_wq_desc_dec(struct cq_enet_wq_desc *desc, + u8 *type, u8 *color, u16 *q_number, u16 *completed_index) +{ + cq_desc_dec((struct cq_desc *)desc, type, + color, q_number, completed_index); +} + +/* Completion queue descriptor: Ethernet receive queue, 16B */ +struct cq_enet_rq_desc { + __le16 completed_index_flags; + __le16 q_number_rss_type_flags; + __le32 rss_hash; + __le16 bytes_written_flags; + __le16 vlan; + __le16 checksum_fcoe; + u8 flags; + u8 type_color; +}; + +#define CQ_ENET_RQ_DESC_FLAGS_INGRESS_PORT (0x1 << 12) +#define CQ_ENET_RQ_DESC_FLAGS_FCOE (0x1 << 13) +#define CQ_ENET_RQ_DESC_FLAGS_EOP (0x1 << 14) +#define CQ_ENET_RQ_DESC_FLAGS_SOP (0x1 << 15) + +#define CQ_ENET_RQ_DESC_RSS_TYPE_BITS 4 +#define CQ_ENET_RQ_DESC_RSS_TYPE_MASK \ + ((1 << CQ_ENET_RQ_DESC_RSS_TYPE_BITS) - 1) +#define CQ_ENET_RQ_DESC_RSS_TYPE_NONE 0 +#define CQ_ENET_RQ_DESC_RSS_TYPE_IPv4 1 +#define CQ_ENET_RQ_DESC_RSS_TYPE_TCP_IPv4 2 +#define CQ_ENET_RQ_DESC_RSS_TYPE_IPv6 3 +#define CQ_ENET_RQ_DESC_RSS_TYPE_TCP_IPv6 4 +#define CQ_ENET_RQ_DESC_RSS_TYPE_IPv6_EX 5 +#define CQ_ENET_RQ_DESC_RSS_TYPE_TCP_IPv6_EX 6 + +#define CQ_ENET_RQ_DESC_FLAGS_CSUM_NOT_CALC (0x1 << 14) + +#define CQ_ENET_RQ_DESC_BYTES_WRITTEN_BITS 14 +#define CQ_ENET_RQ_DESC_BYTES_WRITTEN_MASK \ + ((1 << CQ_ENET_RQ_DESC_BYTES_WRITTEN_BITS) - 1) +#define CQ_ENET_RQ_DESC_FLAGS_TRUNCATED (0x1 << 14) +#define CQ_ENET_RQ_DESC_FLAGS_VLAN_STRIPPED (0x1 << 15) + +#define CQ_ENET_RQ_DESC_FCOE_SOF_BITS 4 +#define CQ_ENET_RQ_DESC_FCOE_SOF_MASK \ + ((1 << CQ_ENET_RQ_DESC_FCOE_SOF_BITS) - 1) +#define CQ_ENET_RQ_DESC_FCOE_EOF_BITS 8 +#define CQ_ENET_RQ_DESC_FCOE_EOF_MASK \ + ((1 << CQ_ENET_RQ_DESC_FCOE_EOF_BITS) - 1) +#define CQ_ENET_RQ_DESC_FCOE_EOF_SHIFT 8 + +#define CQ_ENET_RQ_DESC_FLAGS_TCP_UDP_CSUM_OK (0x1 << 0) +#define CQ_ENET_RQ_DESC_FCOE_FC_CRC_OK (0x1 << 0) +#define CQ_ENET_RQ_DESC_FLAGS_UDP (0x1 << 1) +#define CQ_ENET_RQ_DESC_FCOE_ENC_ERROR (0x1 << 1) +#define CQ_ENET_RQ_DESC_FLAGS_TCP (0x1 << 2) +#define CQ_ENET_RQ_DESC_FLAGS_IPV4_CSUM_OK (0x1 << 3) +#define CQ_ENET_RQ_DESC_FLAGS_IPV6 (0x1 << 4) +#define CQ_ENET_RQ_DESC_FLAGS_IPV4 (0x1 << 5) +#define CQ_ENET_RQ_DESC_FLAGS_IPV4_FRAGMENT (0x1 << 6) +#define CQ_ENET_RQ_DESC_FLAGS_FCS_OK (0x1 << 7) + +static inline void cq_enet_rq_desc_dec(struct cq_enet_rq_desc *desc, + u8 *type, u8 *color, u16 *q_number, u16 *completed_index, + u8 *ingress_port, u8 *fcoe, u8 *eop, u8 *sop, u8 *rss_type, + u8 *csum_not_calc, u32 *rss_hash, u16 *bytes_written, u8 *packet_error, + u8 *vlan_stripped, u16 *vlan, u16 *checksum, u8 *fcoe_sof, + u8 *fcoe_fc_crc_ok, u8 *fcoe_enc_error, u8 *fcoe_eof, + u8 *tcp_udp_csum_ok, u8 *udp, u8 *tcp, u8 *ipv4_csum_ok, + u8 *ipv6, u8 *ipv4, u8 *ipv4_fragment, u8 *fcs_ok) +{ + u16 completed_index_flags = le16_to_cpu(desc->completed_index_flags); + u16 q_number_rss_type_flags = + le16_to_cpu(desc->q_number_rss_type_flags); + u16 bytes_written_flags = le16_to_cpu(desc->bytes_written_flags); + + cq_desc_dec((struct cq_desc *)desc, type, + color, q_number, completed_index); + + *ingress_port = (completed_index_flags & + CQ_ENET_RQ_DESC_FLAGS_INGRESS_PORT) ? 1 : 0; + *fcoe = (completed_index_flags & CQ_ENET_RQ_DESC_FLAGS_FCOE) ? + 1 : 0; + *eop = (completed_index_flags & CQ_ENET_RQ_DESC_FLAGS_EOP) ? + 1 : 0; + *sop = (completed_index_flags & CQ_ENET_RQ_DESC_FLAGS_SOP) ? + 1 : 0; + + *rss_type = (u8)((q_number_rss_type_flags >> CQ_DESC_Q_NUM_BITS) & + CQ_ENET_RQ_DESC_RSS_TYPE_MASK); + *csum_not_calc = (q_number_rss_type_flags & + CQ_ENET_RQ_DESC_FLAGS_CSUM_NOT_CALC) ? 1 : 0; + + *rss_hash = le32_to_cpu(desc->rss_hash); + + *bytes_written = bytes_written_flags & + CQ_ENET_RQ_DESC_BYTES_WRITTEN_MASK; + *packet_error = (bytes_written_flags & + CQ_ENET_RQ_DESC_FLAGS_TRUNCATED) ? 1 : 0; + *vlan_stripped = (bytes_written_flags & + CQ_ENET_RQ_DESC_FLAGS_VLAN_STRIPPED) ? 1 : 0; + + *vlan = le16_to_cpu(desc->vlan); + + if (*fcoe) { + *fcoe_sof = (u8)(le16_to_cpu(desc->checksum_fcoe) & + CQ_ENET_RQ_DESC_FCOE_SOF_MASK); + *fcoe_fc_crc_ok = (desc->flags & + CQ_ENET_RQ_DESC_FCOE_FC_CRC_OK) ? 1 : 0; + *fcoe_enc_error = (desc->flags & + CQ_ENET_RQ_DESC_FCOE_ENC_ERROR) ? 1 : 0; + *fcoe_eof = (u8)((desc->checksum_fcoe >> + CQ_ENET_RQ_DESC_FCOE_EOF_SHIFT) & + CQ_ENET_RQ_DESC_FCOE_EOF_MASK); + *checksum = 0; + } else { + *fcoe_sof = 0; + *fcoe_fc_crc_ok = 0; + *fcoe_enc_error = 0; + *fcoe_eof = 0; + *checksum = le16_to_cpu(desc->checksum_fcoe); + } + + *tcp_udp_csum_ok = + (desc->flags & CQ_ENET_RQ_DESC_FLAGS_TCP_UDP_CSUM_OK) ? 1 : 0; + *udp = (desc->flags & CQ_ENET_RQ_DESC_FLAGS_UDP) ? 1 : 0; + *tcp = (desc->flags & CQ_ENET_RQ_DESC_FLAGS_TCP) ? 1 : 0; + *ipv4_csum_ok = + (desc->flags & CQ_ENET_RQ_DESC_FLAGS_IPV4_CSUM_OK) ? 1 : 0; + *ipv6 = (desc->flags & CQ_ENET_RQ_DESC_FLAGS_IPV6) ? 1 : 0; + *ipv4 = (desc->flags & CQ_ENET_RQ_DESC_FLAGS_IPV4) ? 1 : 0; + *ipv4_fragment = + (desc->flags & CQ_ENET_RQ_DESC_FLAGS_IPV4_FRAGMENT) ? 1 : 0; + *fcs_ok = (desc->flags & CQ_ENET_RQ_DESC_FLAGS_FCS_OK) ? 1 : 0; +} + +#endif /* _CQ_ENET_DESC_H_ */ diff --git a/drivers/scsi/fnic/cq_exch_desc.h b/drivers/scsi/fnic/cq_exch_desc.h new file mode 100644 index 00000000000..501660cfe22 --- /dev/null +++ b/drivers/scsi/fnic/cq_exch_desc.h @@ -0,0 +1,182 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef _CQ_EXCH_DESC_H_ +#define _CQ_EXCH_DESC_H_ + +#include "cq_desc.h" + +/* Exchange completion queue descriptor: 16B */ +struct cq_exch_wq_desc { + u16 completed_index; + u16 q_number; + u16 exchange_id; + u8 tmpl; + u8 reserved0; + u32 reserved1; + u8 exch_status; + u8 reserved2[2]; + u8 type_color; +}; + +#define CQ_EXCH_WQ_STATUS_BITS 2 +#define CQ_EXCH_WQ_STATUS_MASK ((1 << CQ_EXCH_WQ_STATUS_BITS) - 1) + +enum cq_exch_status_types { + CQ_EXCH_WQ_STATUS_TYPE_COMPLETE = 0, + CQ_EXCH_WQ_STATUS_TYPE_ABORT = 1, + CQ_EXCH_WQ_STATUS_TYPE_SGL_EOF = 2, + CQ_EXCH_WQ_STATUS_TYPE_TMPL_ERR = 3, +}; + +static inline void cq_exch_wq_desc_dec(struct cq_exch_wq_desc *desc_ptr, + u8 *type, + u8 *color, + u16 *q_number, + u16 *completed_index, + u8 *exch_status) +{ + cq_desc_dec((struct cq_desc *)desc_ptr, type, + color, q_number, completed_index); + *exch_status = desc_ptr->exch_status & CQ_EXCH_WQ_STATUS_MASK; +} + +struct cq_fcp_rq_desc { + u16 completed_index_eop_sop_prt; + u16 q_number; + u16 exchange_id; + u16 tmpl; + u16 bytes_written; + u16 vlan; + u8 sof; + u8 eof; + u8 fcs_fer_fck; + u8 type_color; +}; + +#define CQ_FCP_RQ_DESC_FLAGS_SOP (1 << 15) +#define CQ_FCP_RQ_DESC_FLAGS_EOP (1 << 14) +#define CQ_FCP_RQ_DESC_FLAGS_PRT (1 << 12) +#define CQ_FCP_RQ_DESC_TMPL_MASK 0x1f +#define CQ_FCP_RQ_DESC_BYTES_WRITTEN_MASK 0x3fff +#define CQ_FCP_RQ_DESC_PACKET_ERR_SHIFT 14 +#define CQ_FCP_RQ_DESC_PACKET_ERR_MASK (1 << CQ_FCP_RQ_DESC_PACKET_ERR_SHIFT) +#define CQ_FCP_RQ_DESC_VS_STRIPPED_SHIFT 15 +#define CQ_FCP_RQ_DESC_VS_STRIPPED_MASK (1 << CQ_FCP_RQ_DESC_VS_STRIPPED_SHIFT) +#define CQ_FCP_RQ_DESC_FC_CRC_OK_MASK 0x1 +#define CQ_FCP_RQ_DESC_FCOE_ERR_SHIFT 1 +#define CQ_FCP_RQ_DESC_FCOE_ERR_MASK (1 << CQ_FCP_RQ_DESC_FCOE_ERR_SHIFT) +#define CQ_FCP_RQ_DESC_FCS_OK_SHIFT 7 +#define CQ_FCP_RQ_DESC_FCS_OK_MASK (1 << CQ_FCP_RQ_DESC_FCS_OK_SHIFT) + +static inline void cq_fcp_rq_desc_dec(struct cq_fcp_rq_desc *desc_ptr, + u8 *type, + u8 *color, + u16 *q_number, + u16 *completed_index, + u8 *eop, + u8 *sop, + u8 *fck, + u16 *exchange_id, + u16 *tmpl, + u32 *bytes_written, + u8 *sof, + u8 *eof, + u8 *ingress_port, + u8 *packet_err, + u8 *fcoe_err, + u8 *fcs_ok, + u8 *vlan_stripped, + u16 *vlan) +{ + cq_desc_dec((struct cq_desc *)desc_ptr, type, + color, q_number, completed_index); + *eop = (desc_ptr->completed_index_eop_sop_prt & + CQ_FCP_RQ_DESC_FLAGS_EOP) ? 1 : 0; + *sop = (desc_ptr->completed_index_eop_sop_prt & + CQ_FCP_RQ_DESC_FLAGS_SOP) ? 1 : 0; + *ingress_port = + (desc_ptr->completed_index_eop_sop_prt & + CQ_FCP_RQ_DESC_FLAGS_PRT) ? 1 : 0; + *exchange_id = desc_ptr->exchange_id; + *tmpl = desc_ptr->tmpl & CQ_FCP_RQ_DESC_TMPL_MASK; + *bytes_written = + desc_ptr->bytes_written & CQ_FCP_RQ_DESC_BYTES_WRITTEN_MASK; + *packet_err = + (desc_ptr->bytes_written & CQ_FCP_RQ_DESC_PACKET_ERR_MASK) >> + CQ_FCP_RQ_DESC_PACKET_ERR_SHIFT; + *vlan_stripped = + (desc_ptr->bytes_written & CQ_FCP_RQ_DESC_VS_STRIPPED_MASK) >> + CQ_FCP_RQ_DESC_VS_STRIPPED_SHIFT; + *vlan = desc_ptr->vlan; + *sof = desc_ptr->sof; + *fck = desc_ptr->fcs_fer_fck & CQ_FCP_RQ_DESC_FC_CRC_OK_MASK; + *fcoe_err = (desc_ptr->fcs_fer_fck & CQ_FCP_RQ_DESC_FCOE_ERR_MASK) >> + CQ_FCP_RQ_DESC_FCOE_ERR_SHIFT; + *eof = desc_ptr->eof; + *fcs_ok = + (desc_ptr->fcs_fer_fck & CQ_FCP_RQ_DESC_FCS_OK_MASK) >> + CQ_FCP_RQ_DESC_FCS_OK_SHIFT; +} + +struct cq_sgl_desc { + u16 exchange_id; + u16 q_number; + u32 active_burst_offset; + u32 tot_data_bytes; + u16 tmpl; + u8 sgl_err; + u8 type_color; +}; + +enum cq_sgl_err_types { + CQ_SGL_ERR_NO_ERROR = 0, + CQ_SGL_ERR_OVERFLOW, /* data ran beyond end of SGL */ + CQ_SGL_ERR_SGL_LCL_ADDR_ERR, /* sgl access to local vnic addr illegal*/ + CQ_SGL_ERR_ADDR_RSP_ERR, /* sgl address error */ + CQ_SGL_ERR_DATA_RSP_ERR, /* sgl data rsp error */ + CQ_SGL_ERR_CNT_ZERO_ERR, /* SGL count is 0 */ + CQ_SGL_ERR_CNT_MAX_ERR, /* SGL count is larger than supported */ + CQ_SGL_ERR_ORDER_ERR, /* frames recv on both ports, order err */ + CQ_SGL_ERR_DATA_LCL_ADDR_ERR,/* sgl data buf to local vnic addr ill */ + CQ_SGL_ERR_HOST_CQ_ERR, /* host cq entry to local vnic addr ill */ +}; + +#define CQ_SGL_SGL_ERR_MASK 0x1f +#define CQ_SGL_TMPL_MASK 0x1f + +static inline void cq_sgl_desc_dec(struct cq_sgl_desc *desc_ptr, + u8 *type, + u8 *color, + u16 *q_number, + u16 *exchange_id, + u32 *active_burst_offset, + u32 *tot_data_bytes, + u16 *tmpl, + u8 *sgl_err) +{ + /* Cheat a little by assuming exchange_id is the same as completed + index */ + cq_desc_dec((struct cq_desc *)desc_ptr, type, color, q_number, + exchange_id); + *active_burst_offset = desc_ptr->active_burst_offset; + *tot_data_bytes = desc_ptr->tot_data_bytes; + *tmpl = desc_ptr->tmpl & CQ_SGL_TMPL_MASK; + *sgl_err = desc_ptr->sgl_err & CQ_SGL_SGL_ERR_MASK; +} + +#endif /* _CQ_EXCH_DESC_H_ */ diff --git a/drivers/scsi/fnic/fcpio.h b/drivers/scsi/fnic/fcpio.h new file mode 100644 index 00000000000..12d770d885c --- /dev/null +++ b/drivers/scsi/fnic/fcpio.h @@ -0,0 +1,780 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef _FCPIO_H_ +#define _FCPIO_H_ + +#include + +/* + * This header file includes all of the data structures used for + * communication by the host driver to the fcp firmware. + */ + +/* + * Exchange and sequence id space allocated to the host driver + */ +#define FCPIO_HOST_EXCH_RANGE_START 0x1000 +#define FCPIO_HOST_EXCH_RANGE_END 0x1fff +#define FCPIO_HOST_SEQ_ID_RANGE_START 0x80 +#define FCPIO_HOST_SEQ_ID_RANGE_END 0xff + +/* + * Command entry type + */ +enum fcpio_type { + /* + * Initiator request types + */ + FCPIO_ICMND_16 = 0x1, + FCPIO_ICMND_32, + FCPIO_ICMND_CMPL, + FCPIO_ITMF, + FCPIO_ITMF_CMPL, + + /* + * Target request types + */ + FCPIO_TCMND_16 = 0x11, + FCPIO_TCMND_32, + FCPIO_TDATA, + FCPIO_TXRDY, + FCPIO_TRSP, + FCPIO_TDRSP_CMPL, + FCPIO_TTMF, + FCPIO_TTMF_ACK, + FCPIO_TABORT, + FCPIO_TABORT_CMPL, + + /* + * Misc request types + */ + FCPIO_ACK = 0x20, + FCPIO_RESET, + FCPIO_RESET_CMPL, + FCPIO_FLOGI_REG, + FCPIO_FLOGI_REG_CMPL, + FCPIO_ECHO, + FCPIO_ECHO_CMPL, + FCPIO_LUNMAP_CHNG, + FCPIO_LUNMAP_REQ, + FCPIO_LUNMAP_REQ_CMPL, + FCPIO_FLOGI_FIP_REG, + FCPIO_FLOGI_FIP_REG_CMPL, +}; + +/* + * Header status codes from the firmware + */ +enum fcpio_status { + FCPIO_SUCCESS = 0, /* request was successful */ + + /* + * If a request to the firmware is rejected, the original request + * header will be returned with the status set to one of the following: + */ + FCPIO_INVALID_HEADER, /* header contains invalid data */ + FCPIO_OUT_OF_RESOURCE, /* out of resources to complete request */ + FCPIO_INVALID_PARAM, /* some parameter in request is invalid */ + FCPIO_REQ_NOT_SUPPORTED, /* request type is not supported */ + FCPIO_IO_NOT_FOUND, /* requested I/O was not found */ + + /* + * Once a request is processed, the firmware will usually return + * a cmpl message type. In cases where errors occurred, + * the header status field would be filled in with one of the following: + */ + FCPIO_ABORTED = 0x41, /* request was aborted */ + FCPIO_TIMEOUT, /* request was timed out */ + FCPIO_SGL_INVALID, /* request was aborted due to sgl error */ + FCPIO_MSS_INVALID, /* request was aborted due to mss error */ + FCPIO_DATA_CNT_MISMATCH, /* recv/sent more/less data than exp. */ + FCPIO_FW_ERR, /* request was terminated due to fw error */ + FCPIO_ITMF_REJECTED, /* itmf req was rejected by remote node */ + FCPIO_ITMF_FAILED, /* itmf req was failed by remote node */ + FCPIO_ITMF_INCORRECT_LUN, /* itmf req targeted incorrect LUN */ + FCPIO_CMND_REJECTED, /* request was invalid and rejected */ + FCPIO_NO_PATH_AVAIL, /* no paths to the lun was available */ + FCPIO_PATH_FAILED, /* i/o sent to current path failed */ + FCPIO_LUNMAP_CHNG_PEND, /* i/o rejected due to lunmap change */ +}; + +/* + * The header command tag. All host requests will use the "tag" field + * to mark commands with a unique tag. When the firmware responds to + * a host request, it will copy the tag field into the response. + * + * The only firmware requests that will use the rx_id/ox_id fields instead + * of the tag field will be the target command and target task management + * requests. These two requests do not have corresponding host requests + * since they come directly from the FC initiator on the network. + */ +struct fcpio_tag { + union { + u32 req_id; + struct { + u16 rx_id; + u16 ox_id; + } ex_id; + } u; +}; + +static inline void +fcpio_tag_id_enc(struct fcpio_tag *tag, u32 id) +{ + tag->u.req_id = id; +} + +static inline void +fcpio_tag_id_dec(struct fcpio_tag *tag, u32 *id) +{ + *id = tag->u.req_id; +} + +static inline void +fcpio_tag_exid_enc(struct fcpio_tag *tag, u16 ox_id, u16 rx_id) +{ + tag->u.ex_id.rx_id = rx_id; + tag->u.ex_id.ox_id = ox_id; +} + +static inline void +fcpio_tag_exid_dec(struct fcpio_tag *tag, u16 *ox_id, u16 *rx_id) +{ + *rx_id = tag->u.ex_id.rx_id; + *ox_id = tag->u.ex_id.ox_id; +} + +/* + * The header for an fcpio request, whether from the firmware or from the + * host driver + */ +struct fcpio_header { + u8 type; /* enum fcpio_type */ + u8 status; /* header status entry */ + u16 _resvd; /* reserved */ + struct fcpio_tag tag; /* header tag */ +}; + +static inline void +fcpio_header_enc(struct fcpio_header *hdr, + u8 type, u8 status, + struct fcpio_tag tag) +{ + hdr->type = type; + hdr->status = status; + hdr->_resvd = 0; + hdr->tag = tag; +} + +static inline void +fcpio_header_dec(struct fcpio_header *hdr, + u8 *type, u8 *status, + struct fcpio_tag *tag) +{ + *type = hdr->type; + *status = hdr->status; + *tag = hdr->tag; +} + +#define CDB_16 16 +#define CDB_32 32 +#define LUN_ADDRESS 8 + +/* + * fcpio_icmnd_16: host -> firmware request + * + * used for sending out an initiator SCSI 16-byte command + */ +struct fcpio_icmnd_16 { + u32 lunmap_id; /* index into lunmap table */ + u8 special_req_flags; /* special exchange request flags */ + u8 _resvd0[3]; /* reserved */ + u32 sgl_cnt; /* scatter-gather list count */ + u32 sense_len; /* sense buffer length */ + u64 sgl_addr; /* scatter-gather list addr */ + u64 sense_addr; /* sense buffer address */ + u8 crn; /* SCSI Command Reference No. */ + u8 pri_ta; /* SCSI Priority and Task attribute */ + u8 _resvd1; /* reserved: should be 0 */ + u8 flags; /* command flags */ + u8 scsi_cdb[CDB_16]; /* SCSI Cmnd Descriptor Block */ + u32 data_len; /* length of data expected */ + u8 lun[LUN_ADDRESS]; /* FC vNIC only: LUN address */ + u8 _resvd2; /* reserved */ + u8 d_id[3]; /* FC vNIC only: Target D_ID */ + u16 mss; /* FC vNIC only: max burst */ + u16 _resvd3; /* reserved */ + u32 r_a_tov; /* FC vNIC only: Res. Alloc Timeout */ + u32 e_d_tov; /* FC vNIC only: Err Detect Timeout */ +}; + +/* + * Special request flags + */ +#define FCPIO_ICMND_SRFLAG_RETRY 0x01 /* Enable Retry handling on exchange */ + +/* + * Priority/Task Attribute settings + */ +#define FCPIO_ICMND_PTA_SIMPLE 0 /* simple task attribute */ +#define FCPIO_ICMND_PTA_HEADQ 1 /* head of queue task attribute */ +#define FCPIO_ICMND_PTA_ORDERED 2 /* ordered task attribute */ +#define FCPIO_ICMND_PTA_ACA 4 /* auto contingent allegiance */ +#define FCPIO_ICMND_PRI_SHIFT 3 /* priority field starts in bit 3 */ + +/* + * Command flags + */ +#define FCPIO_ICMND_RDDATA 0x02 /* read data */ +#define FCPIO_ICMND_WRDATA 0x01 /* write data */ + +/* + * fcpio_icmnd_32: host -> firmware request + * + * used for sending out an initiator SCSI 32-byte command + */ +struct fcpio_icmnd_32 { + u32 lunmap_id; /* index into lunmap table */ + u8 special_req_flags; /* special exchange request flags */ + u8 _resvd0[3]; /* reserved */ + u32 sgl_cnt; /* scatter-gather list count */ + u32 sense_len; /* sense buffer length */ + u64 sgl_addr; /* scatter-gather list addr */ + u64 sense_addr; /* sense buffer address */ + u8 crn; /* SCSI Command Reference No. */ + u8 pri_ta; /* SCSI Priority and Task attribute */ + u8 _resvd1; /* reserved: should be 0 */ + u8 flags; /* command flags */ + u8 scsi_cdb[CDB_32]; /* SCSI Cmnd Descriptor Block */ + u32 data_len; /* length of data expected */ + u8 lun[LUN_ADDRESS]; /* FC vNIC only: LUN address */ + u8 _resvd2; /* reserved */ + u8 d_id[3]; /* FC vNIC only: Target D_ID */ + u16 mss; /* FC vNIC only: max burst */ + u16 _resvd3; /* reserved */ + u32 r_a_tov; /* FC vNIC only: Res. Alloc Timeout */ + u32 e_d_tov; /* FC vNIC only: Error Detect Timeout */ +}; + +/* + * fcpio_itmf: host -> firmware request + * + * used for requesting the firmware to abort a request and/or send out + * a task management function + * + * The t_tag field is only needed when the request type is ABT_TASK. + */ +struct fcpio_itmf { + u32 lunmap_id; /* index into lunmap table */ + u32 tm_req; /* SCSI Task Management request */ + u32 t_tag; /* header tag of fcpio to be aborted */ + u32 _resvd; /* _reserved */ + u8 lun[LUN_ADDRESS]; /* FC vNIC only: LUN address */ + u8 _resvd1; /* reserved */ + u8 d_id[3]; /* FC vNIC only: Target D_ID */ + u32 r_a_tov; /* FC vNIC only: R_A_TOV in msec */ + u32 e_d_tov; /* FC vNIC only: E_D_TOV in msec */ +}; + +/* + * Task Management request + */ +enum fcpio_itmf_tm_req_type { + FCPIO_ITMF_ABT_TASK_TERM = 0x01, /* abort task and terminate */ + FCPIO_ITMF_ABT_TASK, /* abort task and issue abts */ + FCPIO_ITMF_ABT_TASK_SET, /* abort task set */ + FCPIO_ITMF_CLR_TASK_SET, /* clear task set */ + FCPIO_ITMF_LUN_RESET, /* logical unit reset task mgmt */ + FCPIO_ITMF_CLR_ACA, /* Clear ACA condition */ +}; + +/* + * fcpio_tdata: host -> firmware request + * + * used for requesting the firmware to send out a read data transfer for a + * target command + */ +struct fcpio_tdata { + u16 rx_id; /* FC rx_id of target command */ + u16 flags; /* command flags */ + u32 rel_offset; /* data sequence relative offset */ + u32 sgl_cnt; /* scatter-gather list count */ + u32 data_len; /* length of data expected to send */ + u64 sgl_addr; /* scatter-gather list address */ +}; + +/* + * Command flags + */ +#define FCPIO_TDATA_SCSI_RSP 0x01 /* send a scsi resp. after last frame */ + +/* + * fcpio_txrdy: host -> firmware request + * + * used for requesting the firmware to send out a write data transfer for a + * target command + */ +struct fcpio_txrdy { + u16 rx_id; /* FC rx_id of target command */ + u16 _resvd0; /* reserved */ + u32 rel_offset; /* data sequence relative offset */ + u32 sgl_cnt; /* scatter-gather list count */ + u32 data_len; /* length of data expected to send */ + u64 sgl_addr; /* scatter-gather list address */ +}; + +/* + * fcpio_trsp: host -> firmware request + * + * used for requesting the firmware to send out a response for a target + * command + */ +struct fcpio_trsp { + u16 rx_id; /* FC rx_id of target command */ + u16 _resvd0; /* reserved */ + u32 sense_len; /* sense data buffer length */ + u64 sense_addr; /* sense data buffer address */ + u16 _resvd1; /* reserved */ + u8 flags; /* response request flags */ + u8 scsi_status; /* SCSI status */ + u32 residual; /* SCSI data residual value of I/O */ +}; + +/* + * resposnse request flags + */ +#define FCPIO_TRSP_RESID_UNDER 0x08 /* residual is valid and is underflow */ +#define FCPIO_TRSP_RESID_OVER 0x04 /* residual is valid and is overflow */ + +/* + * fcpio_ttmf_ack: host -> firmware response + * + * used by the host to indicate to the firmware it has received and processed + * the target tmf request + */ +struct fcpio_ttmf_ack { + u16 rx_id; /* FC rx_id of target command */ + u16 _resvd0; /* reserved */ + u32 tmf_status; /* SCSI task management status */ +}; + +/* + * fcpio_tabort: host -> firmware request + * + * used by the host to request the firmware to abort a target request that was + * received by the firmware + */ +struct fcpio_tabort { + u16 rx_id; /* rx_id of the target request */ +}; + +/* + * fcpio_reset: host -> firmware request + * + * used by the host to signal a reset of the driver to the firmware + * and to request firmware to clean up all outstanding I/O + */ +struct fcpio_reset { + u32 _resvd; +}; + +enum fcpio_flogi_reg_format_type { + FCPIO_FLOGI_REG_DEF_DEST = 0, /* Use the oui | s_id mac format */ + FCPIO_FLOGI_REG_GW_DEST, /* Use the fixed gateway mac */ +}; + +/* + * fcpio_flogi_reg: host -> firmware request + * + * fc vnic only + * used by the host to notify the firmware of the lif's s_id + * and destination mac address format + */ +struct fcpio_flogi_reg { + u8 format; + u8 s_id[3]; /* FC vNIC only: Source S_ID */ + u8 gateway_mac[ETH_ALEN]; /* Destination gateway mac */ + u16 _resvd; + u32 r_a_tov; /* R_A_TOV in msec */ + u32 e_d_tov; /* E_D_TOV in msec */ +}; + +/* + * fcpio_echo: host -> firmware request + * + * sends a heartbeat echo request to the firmware + */ +struct fcpio_echo { + u32 _resvd; +}; + +/* + * fcpio_lunmap_req: host -> firmware request + * + * scsi vnic only + * sends a request to retrieve the lunmap table for scsi vnics + */ +struct fcpio_lunmap_req { + u64 addr; /* address of the buffer */ + u32 len; /* len of the buffer */ +}; + +/* + * fcpio_flogi_fip_reg: host -> firmware request + * + * fc vnic only + * used by the host to notify the firmware of the lif's s_id + * and destination mac address format + */ +struct fcpio_flogi_fip_reg { + u8 _resvd0; + u8 s_id[3]; /* FC vNIC only: Source S_ID */ + u8 fcf_mac[ETH_ALEN]; /* FCF Target destination mac */ + u16 _resvd1; + u32 r_a_tov; /* R_A_TOV in msec */ + u32 e_d_tov; /* E_D_TOV in msec */ + u8 ha_mac[ETH_ALEN]; /* Host adapter source mac */ + u16 _resvd2; +}; + +/* + * Basic structure for all fcpio structures that are sent from the host to the + * firmware. They are 128 bytes per structure. + */ +#define FCPIO_HOST_REQ_LEN 128 /* expected length of host requests */ + +struct fcpio_host_req { + struct fcpio_header hdr; + + union { + /* + * Defines space needed for request + */ + u8 buf[FCPIO_HOST_REQ_LEN - sizeof(struct fcpio_header)]; + + /* + * Initiator host requests + */ + struct fcpio_icmnd_16 icmnd_16; + struct fcpio_icmnd_32 icmnd_32; + struct fcpio_itmf itmf; + + /* + * Target host requests + */ + struct fcpio_tdata tdata; + struct fcpio_txrdy txrdy; + struct fcpio_trsp trsp; + struct fcpio_ttmf_ack ttmf_ack; + struct fcpio_tabort tabort; + + /* + * Misc requests + */ + struct fcpio_reset reset; + struct fcpio_flogi_reg flogi_reg; + struct fcpio_echo echo; + struct fcpio_lunmap_req lunmap_req; + struct fcpio_flogi_fip_reg flogi_fip_reg; + } u; +}; + +/* + * fcpio_icmnd_cmpl: firmware -> host response + * + * used for sending the host a response to an initiator command + */ +struct fcpio_icmnd_cmpl { + u8 _resvd0[6]; /* reserved */ + u8 flags; /* response flags */ + u8 scsi_status; /* SCSI status */ + u32 residual; /* SCSI data residual length */ + u32 sense_len; /* SCSI sense length */ +}; + +/* + * response flags + */ +#define FCPIO_ICMND_CMPL_RESID_UNDER 0x08 /* resid under and valid */ +#define FCPIO_ICMND_CMPL_RESID_OVER 0x04 /* resid over and valid */ + +/* + * fcpio_itmf_cmpl: firmware -> host response + * + * used for sending the host a response for a itmf request + */ +struct fcpio_itmf_cmpl { + u32 _resvd; /* reserved */ +}; + +/* + * fcpio_tcmnd_16: firmware -> host request + * + * used by the firmware to notify the host of an incoming target SCSI 16-Byte + * request + */ +struct fcpio_tcmnd_16 { + u8 lun[LUN_ADDRESS]; /* FC vNIC only: LUN address */ + u8 crn; /* SCSI Command Reference No. */ + u8 pri_ta; /* SCSI Priority and Task attribute */ + u8 _resvd2; /* reserved: should be 0 */ + u8 flags; /* command flags */ + u8 scsi_cdb[CDB_16]; /* SCSI Cmnd Descriptor Block */ + u32 data_len; /* length of data expected */ + u8 _resvd1; /* reserved */ + u8 s_id[3]; /* FC vNIC only: Source S_ID */ +}; + +/* + * Priority/Task Attribute settings + */ +#define FCPIO_TCMND_PTA_SIMPLE 0 /* simple task attribute */ +#define FCPIO_TCMND_PTA_HEADQ 1 /* head of queue task attribute */ +#define FCPIO_TCMND_PTA_ORDERED 2 /* ordered task attribute */ +#define FCPIO_TCMND_PTA_ACA 4 /* auto contingent allegiance */ +#define FCPIO_TCMND_PRI_SHIFT 3 /* priority field starts in bit 3 */ + +/* + * Command flags + */ +#define FCPIO_TCMND_RDDATA 0x02 /* read data */ +#define FCPIO_TCMND_WRDATA 0x01 /* write data */ + +/* + * fcpio_tcmnd_32: firmware -> host request + * + * used by the firmware to notify the host of an incoming target SCSI 32-Byte + * request + */ +struct fcpio_tcmnd_32 { + u8 lun[LUN_ADDRESS]; /* FC vNIC only: LUN address */ + u8 crn; /* SCSI Command Reference No. */ + u8 pri_ta; /* SCSI Priority and Task attribute */ + u8 _resvd2; /* reserved: should be 0 */ + u8 flags; /* command flags */ + u8 scsi_cdb[CDB_32]; /* SCSI Cmnd Descriptor Block */ + u32 data_len; /* length of data expected */ + u8 _resvd0; /* reserved */ + u8 s_id[3]; /* FC vNIC only: Source S_ID */ +}; + +/* + * fcpio_tdrsp_cmpl: firmware -> host response + * + * used by the firmware to notify the host of a response to a host target + * command + */ +struct fcpio_tdrsp_cmpl { + u16 rx_id; /* rx_id of the target request */ + u16 _resvd0; /* reserved */ +}; + +/* + * fcpio_ttmf: firmware -> host request + * + * used by the firmware to notify the host of an incoming task management + * function request + */ +struct fcpio_ttmf { + u8 _resvd0; /* reserved */ + u8 s_id[3]; /* FC vNIC only: Source S_ID */ + u8 lun[LUN_ADDRESS]; /* FC vNIC only: LUN address */ + u8 crn; /* SCSI Command Reference No. */ + u8 _resvd2[3]; /* reserved */ + u32 tmf_type; /* task management request type */ +}; + +/* + * Task Management request + */ +#define FCPIO_TTMF_CLR_ACA 0x40 /* Clear ACA condition */ +#define FCPIO_TTMF_LUN_RESET 0x10 /* logical unit reset task mgmt */ +#define FCPIO_TTMF_CLR_TASK_SET 0x04 /* clear task set */ +#define FCPIO_TTMF_ABT_TASK_SET 0x02 /* abort task set */ +#define FCPIO_TTMF_ABT_TASK 0x01 /* abort task */ + +/* + * fcpio_tabort_cmpl: firmware -> host response + * + * used by the firmware to respond to a host's tabort request + */ +struct fcpio_tabort_cmpl { + u16 rx_id; /* rx_id of the target request */ + u16 _resvd0; /* reserved */ +}; + +/* + * fcpio_ack: firmware -> host response + * + * used by firmware to notify the host of the last work request received + */ +struct fcpio_ack { + u16 request_out; /* last host entry received */ + u16 _resvd; +}; + +/* + * fcpio_reset_cmpl: firmware -> host response + * + * use by firmware to respond to the host's reset request + */ +struct fcpio_reset_cmpl { + u16 vnic_id; +}; + +/* + * fcpio_flogi_reg_cmpl: firmware -> host response + * + * fc vnic only + * response to the fcpio_flogi_reg request + */ +struct fcpio_flogi_reg_cmpl { + u32 _resvd; +}; + +/* + * fcpio_echo_cmpl: firmware -> host response + * + * response to the fcpio_echo request + */ +struct fcpio_echo_cmpl { + u32 _resvd; +}; + +/* + * fcpio_lunmap_chng: firmware -> host notification + * + * scsi vnic only + * notifies the host that the lunmap tables have changed + */ +struct fcpio_lunmap_chng { + u32 _resvd; +}; + +/* + * fcpio_lunmap_req_cmpl: firmware -> host response + * + * scsi vnic only + * response for lunmap table request from the host + */ +struct fcpio_lunmap_req_cmpl { + u32 _resvd; +}; + +/* + * Basic structure for all fcpio structures that are sent from the firmware to + * the host. They are 64 bytes per structure. + */ +#define FCPIO_FW_REQ_LEN 64 /* expected length of fw requests */ +struct fcpio_fw_req { + struct fcpio_header hdr; + + union { + /* + * Defines space needed for request + */ + u8 buf[FCPIO_FW_REQ_LEN - sizeof(struct fcpio_header)]; + + /* + * Initiator firmware responses + */ + struct fcpio_icmnd_cmpl icmnd_cmpl; + struct fcpio_itmf_cmpl itmf_cmpl; + + /* + * Target firmware new requests + */ + struct fcpio_tcmnd_16 tcmnd_16; + struct fcpio_tcmnd_32 tcmnd_32; + + /* + * Target firmware responses + */ + struct fcpio_tdrsp_cmpl tdrsp_cmpl; + struct fcpio_ttmf ttmf; + struct fcpio_tabort_cmpl tabort_cmpl; + + /* + * Firmware response to work received + */ + struct fcpio_ack ack; + + /* + * Misc requests + */ + struct fcpio_reset_cmpl reset_cmpl; + struct fcpio_flogi_reg_cmpl flogi_reg_cmpl; + struct fcpio_echo_cmpl echo_cmpl; + struct fcpio_lunmap_chng lunmap_chng; + struct fcpio_lunmap_req_cmpl lunmap_req_cmpl; + } u; +}; + +/* + * Access routines to encode and decode the color bit, which is the most + * significant bit of the MSB of the structure + */ +static inline void fcpio_color_enc(struct fcpio_fw_req *fw_req, u8 color) +{ + u8 *c = ((u8 *) fw_req) + sizeof(struct fcpio_fw_req) - 1; + + if (color) + *c |= 0x80; + else + *c &= ~0x80; +} + +static inline void fcpio_color_dec(struct fcpio_fw_req *fw_req, u8 *color) +{ + u8 *c = ((u8 *) fw_req) + sizeof(struct fcpio_fw_req) - 1; + + *color = *c >> 7; + + /* + * Make sure color bit is read from desc *before* other fields + * are read from desc. Hardware guarantees color bit is last + * bit (byte) written. Adding the rmb() prevents the compiler + * and/or CPU from reordering the reads which would potentially + * result in reading stale values. + */ + + rmb(); + +} + +/* + * Lunmap table entry for scsi vnics + */ +#define FCPIO_LUNMAP_TABLE_SIZE 256 +#define FCPIO_FLAGS_LUNMAP_VALID 0x80 +#define FCPIO_FLAGS_BOOT 0x01 +struct fcpio_lunmap_entry { + u8 bus; + u8 target; + u8 lun; + u8 path_cnt; + u16 flags; + u16 update_cnt; +}; + +struct fcpio_lunmap_tbl { + u32 update_cnt; + struct fcpio_lunmap_entry lunmaps[FCPIO_LUNMAP_TABLE_SIZE]; +}; + +#endif /* _FCPIO_H_ */ diff --git a/drivers/scsi/fnic/fnic.h b/drivers/scsi/fnic/fnic.h new file mode 100644 index 00000000000..e4c0a3d7d87 --- /dev/null +++ b/drivers/scsi/fnic/fnic.h @@ -0,0 +1,265 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef _FNIC_H_ +#define _FNIC_H_ + +#include +#include +#include +#include +#include "fnic_io.h" +#include "fnic_res.h" +#include "vnic_dev.h" +#include "vnic_wq.h" +#include "vnic_rq.h" +#include "vnic_cq.h" +#include "vnic_wq_copy.h" +#include "vnic_intr.h" +#include "vnic_stats.h" +#include "vnic_scsi.h" + +#define DRV_NAME "fnic" +#define DRV_DESCRIPTION "Cisco FCoE HBA Driver" +#define DRV_VERSION "1.0.0.1121" +#define PFX DRV_NAME ": " +#define DFX DRV_NAME "%d: " + +#define DESC_CLEAN_LOW_WATERMARK 8 +#define FNIC_MAX_IO_REQ 2048 /* scsi_cmnd tag map entries */ +#define FNIC_IO_LOCKS 64 /* IO locks: power of 2 */ +#define FNIC_DFLT_QUEUE_DEPTH 32 +#define FNIC_STATS_RATE_LIMIT 4 /* limit rate at which stats are pulled up */ + +/* + * Tag bits used for special requests. + */ +#define BIT(nr) (1UL << (nr)) +#define FNIC_TAG_ABORT BIT(30) /* tag bit indicating abort */ +#define FNIC_TAG_DEV_RST BIT(29) /* indicates device reset */ +#define FNIC_TAG_MASK (BIT(24) - 1) /* mask for lookup */ +#define FNIC_NO_TAG -1 + +/* + * Usage of the scsi_cmnd scratchpad. + * These fields are locked by the hashed io_req_lock. + */ +#define CMD_SP(Cmnd) ((Cmnd)->SCp.ptr) +#define CMD_STATE(Cmnd) ((Cmnd)->SCp.phase) +#define CMD_ABTS_STATUS(Cmnd) ((Cmnd)->SCp.Message) +#define CMD_LR_STATUS(Cmnd) ((Cmnd)->SCp.have_data_in) +#define CMD_TAG(Cmnd) ((Cmnd)->SCp.sent_command) + +#define FCPIO_INVALID_CODE 0x100 /* hdr_status value unused by firmware */ + +#define FNIC_LUN_RESET_TIMEOUT 10000 /* mSec */ +#define FNIC_HOST_RESET_TIMEOUT 10000 /* mSec */ +#define FNIC_RMDEVICE_TIMEOUT 1000 /* mSec */ +#define FNIC_HOST_RESET_SETTLE_TIME 30 /* Sec */ + +#define FNIC_MAX_FCP_TARGET 256 + +extern unsigned int fnic_log_level; + +#define FNIC_MAIN_LOGGING 0x01 +#define FNIC_FCS_LOGGING 0x02 +#define FNIC_SCSI_LOGGING 0x04 +#define FNIC_ISR_LOGGING 0x08 + +#define FNIC_CHECK_LOGGING(LEVEL, CMD) \ +do { \ + if (unlikely(fnic_log_level & LEVEL)) \ + do { \ + CMD; \ + } while (0); \ +} while (0) + +#define FNIC_MAIN_DBG(kern_level, host, fmt, args...) \ + FNIC_CHECK_LOGGING(FNIC_MAIN_LOGGING, \ + shost_printk(kern_level, host, fmt, ##args);) + +#define FNIC_FCS_DBG(kern_level, host, fmt, args...) \ + FNIC_CHECK_LOGGING(FNIC_FCS_LOGGING, \ + shost_printk(kern_level, host, fmt, ##args);) + +#define FNIC_SCSI_DBG(kern_level, host, fmt, args...) \ + FNIC_CHECK_LOGGING(FNIC_SCSI_LOGGING, \ + shost_printk(kern_level, host, fmt, ##args);) + +#define FNIC_ISR_DBG(kern_level, host, fmt, args...) \ + FNIC_CHECK_LOGGING(FNIC_ISR_LOGGING, \ + shost_printk(kern_level, host, fmt, ##args);) + +extern const char *fnic_state_str[]; + +enum fnic_intx_intr_index { + FNIC_INTX_WQ_RQ_COPYWQ, + FNIC_INTX_ERR, + FNIC_INTX_NOTIFY, + FNIC_INTX_INTR_MAX, +}; + +enum fnic_msix_intr_index { + FNIC_MSIX_RQ, + FNIC_MSIX_WQ, + FNIC_MSIX_WQ_COPY, + FNIC_MSIX_ERR_NOTIFY, + FNIC_MSIX_INTR_MAX, +}; + +struct fnic_msix_entry { + int requested; + char devname[IFNAMSIZ]; + irqreturn_t (*isr)(int, void *); + void *devid; +}; + +enum fnic_state { + FNIC_IN_FC_MODE = 0, + FNIC_IN_FC_TRANS_ETH_MODE, + FNIC_IN_ETH_MODE, + FNIC_IN_ETH_TRANS_FC_MODE, +}; + +#define FNIC_WQ_COPY_MAX 1 +#define FNIC_WQ_MAX 1 +#define FNIC_RQ_MAX 1 +#define FNIC_CQ_MAX (FNIC_WQ_COPY_MAX + FNIC_WQ_MAX + FNIC_RQ_MAX) + +struct mempool; + +/* Per-instance private data structure */ +struct fnic { + struct fc_lport *lport; + struct vnic_dev_bar bar0; + + struct msix_entry msix_entry[FNIC_MSIX_INTR_MAX]; + struct fnic_msix_entry msix[FNIC_MSIX_INTR_MAX]; + + struct vnic_stats *stats; + unsigned long stats_time; /* time of stats update */ + struct vnic_nic_cfg *nic_cfg; + char name[IFNAMSIZ]; + struct timer_list notify_timer; /* used for MSI interrupts */ + + unsigned int err_intr_offset; + unsigned int link_intr_offset; + + unsigned int wq_count; + unsigned int cq_count; + + u32 fcoui_mode:1; /* use fcoui address*/ + u32 vlan_hw_insert:1; /* let hw insert the tag */ + u32 in_remove:1; /* fnic device in removal */ + u32 stop_rx_link_events:1; /* stop proc. rx frames, link events */ + + struct completion *remove_wait; /* device remove thread blocks */ + + struct fc_frame *flogi; + struct fc_frame *flogi_resp; + u16 flogi_oxid; + unsigned long s_id; + enum fnic_state state; + spinlock_t fnic_lock; + + u16 vlan_id; /* VLAN tag including priority */ + u8 mac_addr[ETH_ALEN]; + u8 dest_addr[ETH_ALEN]; + u8 data_src_addr[ETH_ALEN]; + u64 fcp_input_bytes; /* internal statistic */ + u64 fcp_output_bytes; /* internal statistic */ + u32 link_down_cnt; + int link_status; + + struct list_head list; + struct pci_dev *pdev; + struct vnic_fc_config config; + struct vnic_dev *vdev; + unsigned int raw_wq_count; + unsigned int wq_copy_count; + unsigned int rq_count; + int fw_ack_index[FNIC_WQ_COPY_MAX]; + unsigned short fw_ack_recd[FNIC_WQ_COPY_MAX]; + unsigned short wq_copy_desc_low[FNIC_WQ_COPY_MAX]; + unsigned int intr_count; + u32 __iomem *legacy_pba; + struct fnic_host_tag *tags; + mempool_t *io_req_pool; + mempool_t *io_sgl_pool[FNIC_SGL_NUM_CACHES]; + spinlock_t io_req_lock[FNIC_IO_LOCKS]; /* locks for scsi cmnds */ + + struct work_struct link_work; + struct work_struct frame_work; + struct sk_buff_head frame_queue; + + /* copy work queue cache line section */ + ____cacheline_aligned struct vnic_wq_copy wq_copy[FNIC_WQ_COPY_MAX]; + /* completion queue cache line section */ + ____cacheline_aligned struct vnic_cq cq[FNIC_CQ_MAX]; + + spinlock_t wq_copy_lock[FNIC_WQ_COPY_MAX]; + + /* work queue cache line section */ + ____cacheline_aligned struct vnic_wq wq[FNIC_WQ_MAX]; + spinlock_t wq_lock[FNIC_WQ_MAX]; + + /* receive queue cache line section */ + ____cacheline_aligned struct vnic_rq rq[FNIC_RQ_MAX]; + + /* interrupt resource cache line section */ + ____cacheline_aligned struct vnic_intr intr[FNIC_MSIX_INTR_MAX]; +}; + +extern struct workqueue_struct *fnic_event_queue; +extern struct device_attribute *fnic_attrs[]; + +void fnic_clear_intr_mode(struct fnic *fnic); +int fnic_set_intr_mode(struct fnic *fnic); +void fnic_free_intr(struct fnic *fnic); +int fnic_request_intr(struct fnic *fnic); + +int fnic_send(struct fc_lport *, struct fc_frame *); +void fnic_free_wq_buf(struct vnic_wq *wq, struct vnic_wq_buf *buf); +void fnic_handle_frame(struct work_struct *work); +void fnic_handle_link(struct work_struct *work); +int fnic_rq_cmpl_handler(struct fnic *fnic, int); +int fnic_alloc_rq_frame(struct vnic_rq *rq); +void fnic_free_rq_buf(struct vnic_rq *rq, struct vnic_rq_buf *buf); +int fnic_send_frame(struct fnic *fnic, struct fc_frame *fp); + +int fnic_queuecommand(struct scsi_cmnd *, void (*done)(struct scsi_cmnd *)); +int fnic_abort_cmd(struct scsi_cmnd *); +int fnic_device_reset(struct scsi_cmnd *); +int fnic_host_reset(struct scsi_cmnd *); +int fnic_reset(struct Scsi_Host *); +void fnic_scsi_cleanup(struct fc_lport *); +void fnic_scsi_abort_io(struct fc_lport *); +void fnic_empty_scsi_cleanup(struct fc_lport *); +void fnic_exch_mgr_reset(struct fc_lport *, u32, u32); +int fnic_wq_copy_cmpl_handler(struct fnic *fnic, int); +int fnic_wq_cmpl_handler(struct fnic *fnic, int); +int fnic_flogi_reg_handler(struct fnic *fnic); +void fnic_wq_copy_cleanup_handler(struct vnic_wq_copy *wq, + struct fcpio_host_req *desc); +int fnic_fw_reset_handler(struct fnic *fnic); +void fnic_terminate_rport_io(struct fc_rport *); +const char *fnic_state_to_str(unsigned int state); + +void fnic_log_q_error(struct fnic *fnic); +void fnic_handle_link_event(struct fnic *fnic); + +#endif /* _FNIC_H_ */ diff --git a/drivers/scsi/fnic/fnic_attrs.c b/drivers/scsi/fnic/fnic_attrs.c new file mode 100644 index 00000000000..aea0c3becfd --- /dev/null +++ b/drivers/scsi/fnic/fnic_attrs.c @@ -0,0 +1,56 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#include +#include +#include +#include "fnic.h" + +static ssize_t fnic_show_state(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct fc_lport *lp = shost_priv(class_to_shost(dev)); + struct fnic *fnic = lport_priv(lp); + + return snprintf(buf, PAGE_SIZE, "%s\n", fnic_state_str[fnic->state]); +} + +static ssize_t fnic_show_drv_version(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return snprintf(buf, PAGE_SIZE, "%s\n", DRV_VERSION); +} + +static ssize_t fnic_show_link_state(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct fc_lport *lp = shost_priv(class_to_shost(dev)); + + return snprintf(buf, PAGE_SIZE, "%s\n", (lp->link_up) + ? "Link Up" : "Link Down"); +} + +static DEVICE_ATTR(fnic_state, S_IRUGO, fnic_show_state, NULL); +static DEVICE_ATTR(drv_version, S_IRUGO, fnic_show_drv_version, NULL); +static DEVICE_ATTR(link_state, S_IRUGO, fnic_show_link_state, NULL); + +struct device_attribute *fnic_attrs[] = { + &dev_attr_fnic_state, + &dev_attr_drv_version, + &dev_attr_link_state, + NULL, +}; diff --git a/drivers/scsi/fnic/fnic_fcs.c b/drivers/scsi/fnic/fnic_fcs.c new file mode 100644 index 00000000000..07e6eedb83c --- /dev/null +++ b/drivers/scsi/fnic/fnic_fcs.c @@ -0,0 +1,742 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "fnic_io.h" +#include "fnic.h" +#include "cq_enet_desc.h" +#include "cq_exch_desc.h" + +struct workqueue_struct *fnic_event_queue; + +void fnic_handle_link(struct work_struct *work) +{ + struct fnic *fnic = container_of(work, struct fnic, link_work); + unsigned long flags; + int old_link_status; + u32 old_link_down_cnt; + + spin_lock_irqsave(&fnic->fnic_lock, flags); + + if (fnic->stop_rx_link_events) { + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + return; + } + + old_link_down_cnt = fnic->link_down_cnt; + old_link_status = fnic->link_status; + fnic->link_status = vnic_dev_link_status(fnic->vdev); + fnic->link_down_cnt = vnic_dev_link_down_cnt(fnic->vdev); + + if (old_link_status == fnic->link_status) { + if (!fnic->link_status) + /* DOWN -> DOWN */ + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + else { + if (old_link_down_cnt != fnic->link_down_cnt) { + /* UP -> DOWN -> UP */ + fnic->lport->host_stats.link_failure_count++; + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + FNIC_FCS_DBG(KERN_DEBUG, fnic->lport->host, + "link down\n"); + fc_linkdown(fnic->lport); + FNIC_FCS_DBG(KERN_DEBUG, fnic->lport->host, + "link up\n"); + fc_linkup(fnic->lport); + } else + /* UP -> UP */ + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + } + } else if (fnic->link_status) { + /* DOWN -> UP */ + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + FNIC_FCS_DBG(KERN_DEBUG, fnic->lport->host, "link up\n"); + fc_linkup(fnic->lport); + } else { + /* UP -> DOWN */ + fnic->lport->host_stats.link_failure_count++; + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + FNIC_FCS_DBG(KERN_DEBUG, fnic->lport->host, "link down\n"); + fc_linkdown(fnic->lport); + } + +} + +/* + * This function passes incoming fabric frames to libFC + */ +void fnic_handle_frame(struct work_struct *work) +{ + struct fnic *fnic = container_of(work, struct fnic, frame_work); + struct fc_lport *lp = fnic->lport; + unsigned long flags; + struct sk_buff *skb; + struct fc_frame *fp; + + while ((skb = skb_dequeue(&fnic->frame_queue))) { + + spin_lock_irqsave(&fnic->fnic_lock, flags); + if (fnic->stop_rx_link_events) { + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + dev_kfree_skb(skb); + return; + } + fp = (struct fc_frame *)skb; + /* if Flogi resp frame, register the address */ + if (fr_flags(fp)) { + vnic_dev_add_addr(fnic->vdev, + fnic->data_src_addr); + fr_flags(fp) = 0; + } + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + + fc_exch_recv(lp, lp->emp, fp); + } + +} + +static inline void fnic_import_rq_fc_frame(struct sk_buff *skb, + u32 len, u8 sof, u8 eof) +{ + struct fc_frame *fp = (struct fc_frame *)skb; + + skb_trim(skb, len); + fr_eof(fp) = eof; + fr_sof(fp) = sof; +} + + +static inline int fnic_import_rq_eth_pkt(struct sk_buff *skb, u32 len) +{ + struct fc_frame *fp; + struct ethhdr *eh; + struct vlan_ethhdr *vh; + struct fcoe_hdr *fcoe_hdr; + struct fcoe_crc_eof *ft; + u32 transport_len = 0; + + eh = (struct ethhdr *)skb->data; + vh = (struct vlan_ethhdr *)skb->data; + if (vh->h_vlan_proto == htons(ETH_P_8021Q) && + vh->h_vlan_encapsulated_proto == htons(ETH_P_FCOE)) { + skb_pull(skb, sizeof(struct vlan_ethhdr)); + transport_len += sizeof(struct vlan_ethhdr); + } else if (eh->h_proto == htons(ETH_P_FCOE)) { + transport_len += sizeof(struct ethhdr); + skb_pull(skb, sizeof(struct ethhdr)); + } else + return -1; + + fcoe_hdr = (struct fcoe_hdr *)skb->data; + if (FC_FCOE_DECAPS_VER(fcoe_hdr) != FC_FCOE_VER) + return -1; + + fp = (struct fc_frame *)skb; + fc_frame_init(fp); + fr_sof(fp) = fcoe_hdr->fcoe_sof; + skb_pull(skb, sizeof(struct fcoe_hdr)); + transport_len += sizeof(struct fcoe_hdr); + + ft = (struct fcoe_crc_eof *)(skb->data + len - + transport_len - sizeof(*ft)); + fr_eof(fp) = ft->fcoe_eof; + skb_trim(skb, len - transport_len - sizeof(*ft)); + return 0; +} + +static inline int fnic_handle_flogi_resp(struct fnic *fnic, + struct fc_frame *fp) +{ + u8 mac[ETH_ALEN] = FC_FCOE_FLOGI_MAC; + struct ethhdr *eth_hdr; + struct fc_frame_header *fh; + int ret = 0; + unsigned long flags; + struct fc_frame *old_flogi_resp = NULL; + + fh = (struct fc_frame_header *)fr_hdr(fp); + + spin_lock_irqsave(&fnic->fnic_lock, flags); + + if (fnic->state == FNIC_IN_ETH_MODE) { + + /* + * Check if oxid matches on taking the lock. A new Flogi + * issued by libFC might have changed the fnic cached oxid + */ + if (fnic->flogi_oxid != ntohs(fh->fh_ox_id)) { + FNIC_FCS_DBG(KERN_DEBUG, fnic->lport->host, + "Flogi response oxid not" + " matching cached oxid, dropping frame" + "\n"); + ret = -1; + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + dev_kfree_skb_irq(fp_skb(fp)); + goto handle_flogi_resp_end; + } + + /* Drop older cached flogi response frame, cache this frame */ + old_flogi_resp = fnic->flogi_resp; + fnic->flogi_resp = fp; + fnic->flogi_oxid = FC_XID_UNKNOWN; + + /* + * this frame is part of flogi get the src mac addr from this + * frame if the src mac is fcoui based then we mark the + * address mode flag to use fcoui base for dst mac addr + * otherwise we have to store the fcoe gateway addr + */ + eth_hdr = (struct ethhdr *)skb_mac_header(fp_skb(fp)); + memcpy(mac, eth_hdr->h_source, ETH_ALEN); + + if (ntoh24(mac) == FC_FCOE_OUI) + fnic->fcoui_mode = 1; + else { + fnic->fcoui_mode = 0; + memcpy(fnic->dest_addr, mac, ETH_ALEN); + } + + /* + * Except for Flogi frame, all outbound frames from us have the + * Eth Src address as FC_FCOE_OUI"our_sid". Flogi frame uses + * the vnic MAC address as the Eth Src address + */ + fc_fcoe_set_mac(fnic->data_src_addr, fh->fh_d_id); + + /* We get our s_id from the d_id of the flogi resp frame */ + fnic->s_id = ntoh24(fh->fh_d_id); + + /* Change state to reflect transition from Eth to FC mode */ + fnic->state = FNIC_IN_ETH_TRANS_FC_MODE; + + } else { + FNIC_FCS_DBG(KERN_DEBUG, fnic->lport->host, + "Unexpected fnic state %s while" + " processing flogi resp\n", + fnic_state_to_str(fnic->state)); + ret = -1; + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + dev_kfree_skb_irq(fp_skb(fp)); + goto handle_flogi_resp_end; + } + + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + + /* Drop older cached frame */ + if (old_flogi_resp) + dev_kfree_skb_irq(fp_skb(old_flogi_resp)); + + /* + * send flogi reg request to firmware, this will put the fnic in + * in FC mode + */ + ret = fnic_flogi_reg_handler(fnic); + + if (ret < 0) { + int free_fp = 1; + spin_lock_irqsave(&fnic->fnic_lock, flags); + /* + * free the frame is some other thread is not + * pointing to it + */ + if (fnic->flogi_resp != fp) + free_fp = 0; + else + fnic->flogi_resp = NULL; + + if (fnic->state == FNIC_IN_ETH_TRANS_FC_MODE) + fnic->state = FNIC_IN_ETH_MODE; + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + if (free_fp) + dev_kfree_skb_irq(fp_skb(fp)); + } + + handle_flogi_resp_end: + return ret; +} + +/* Returns 1 for a response that matches cached flogi oxid */ +static inline int is_matching_flogi_resp_frame(struct fnic *fnic, + struct fc_frame *fp) +{ + struct fc_frame_header *fh; + int ret = 0; + u32 f_ctl; + + fh = fc_frame_header_get(fp); + f_ctl = ntoh24(fh->fh_f_ctl); + + if (fnic->flogi_oxid == ntohs(fh->fh_ox_id) && + fh->fh_r_ctl == FC_RCTL_ELS_REP && + (f_ctl & (FC_FC_EX_CTX | FC_FC_SEQ_CTX)) == FC_FC_EX_CTX && + fh->fh_type == FC_TYPE_ELS) + ret = 1; + + return ret; +} + +static void fnic_rq_cmpl_frame_recv(struct vnic_rq *rq, struct cq_desc + *cq_desc, struct vnic_rq_buf *buf, + int skipped __attribute__((unused)), + void *opaque) +{ + struct fnic *fnic = vnic_dev_priv(rq->vdev); + struct sk_buff *skb; + struct fc_frame *fp; + unsigned int eth_hdrs_stripped; + u8 type, color, eop, sop, ingress_port, vlan_stripped; + u8 fcoe = 0, fcoe_sof, fcoe_eof; + u8 fcoe_fc_crc_ok = 1, fcoe_enc_error = 0; + u8 tcp_udp_csum_ok, udp, tcp, ipv4_csum_ok; + u8 ipv6, ipv4, ipv4_fragment, rss_type, csum_not_calc; + u8 fcs_ok = 1, packet_error = 0; + u16 q_number, completed_index, bytes_written = 0, vlan, checksum; + u32 rss_hash; + u16 exchange_id, tmpl; + u8 sof = 0; + u8 eof = 0; + u32 fcp_bytes_written = 0; + unsigned long flags; + + pci_unmap_single(fnic->pdev, buf->dma_addr, buf->len, + PCI_DMA_FROMDEVICE); + skb = buf->os_buf; + buf->os_buf = NULL; + + cq_desc_dec(cq_desc, &type, &color, &q_number, &completed_index); + if (type == CQ_DESC_TYPE_RQ_FCP) { + cq_fcp_rq_desc_dec((struct cq_fcp_rq_desc *)cq_desc, + &type, &color, &q_number, &completed_index, + &eop, &sop, &fcoe_fc_crc_ok, &exchange_id, + &tmpl, &fcp_bytes_written, &sof, &eof, + &ingress_port, &packet_error, + &fcoe_enc_error, &fcs_ok, &vlan_stripped, + &vlan); + eth_hdrs_stripped = 1; + + } else if (type == CQ_DESC_TYPE_RQ_ENET) { + cq_enet_rq_desc_dec((struct cq_enet_rq_desc *)cq_desc, + &type, &color, &q_number, &completed_index, + &ingress_port, &fcoe, &eop, &sop, + &rss_type, &csum_not_calc, &rss_hash, + &bytes_written, &packet_error, + &vlan_stripped, &vlan, &checksum, + &fcoe_sof, &fcoe_fc_crc_ok, + &fcoe_enc_error, &fcoe_eof, + &tcp_udp_csum_ok, &udp, &tcp, + &ipv4_csum_ok, &ipv6, &ipv4, + &ipv4_fragment, &fcs_ok); + eth_hdrs_stripped = 0; + + } else { + /* wrong CQ type*/ + shost_printk(KERN_ERR, fnic->lport->host, + "fnic rq_cmpl wrong cq type x%x\n", type); + goto drop; + } + + if (!fcs_ok || packet_error || !fcoe_fc_crc_ok || fcoe_enc_error) { + FNIC_FCS_DBG(KERN_DEBUG, fnic->lport->host, + "fnic rq_cmpl fcoe x%x fcsok x%x" + " pkterr x%x fcoe_fc_crc_ok x%x, fcoe_enc_err" + " x%x\n", + fcoe, fcs_ok, packet_error, + fcoe_fc_crc_ok, fcoe_enc_error); + goto drop; + } + + if (eth_hdrs_stripped) + fnic_import_rq_fc_frame(skb, fcp_bytes_written, sof, eof); + else if (fnic_import_rq_eth_pkt(skb, bytes_written)) + goto drop; + + fp = (struct fc_frame *)skb; + + /* + * If frame is an ELS response that matches the cached FLOGI OX_ID, + * and is accept, issue flogi_reg_request copy wq request to firmware + * to register the S_ID and determine whether FC_OUI mode or GW mode. + */ + if (is_matching_flogi_resp_frame(fnic, fp)) { + if (!eth_hdrs_stripped) { + if (fc_frame_payload_op(fp) == ELS_LS_ACC) { + fnic_handle_flogi_resp(fnic, fp); + return; + } + /* + * Recd. Flogi reject. No point registering + * with fw, but forward to libFC + */ + goto forward; + } + goto drop; + } + if (!eth_hdrs_stripped) + goto drop; + +forward: + spin_lock_irqsave(&fnic->fnic_lock, flags); + if (fnic->stop_rx_link_events) { + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + goto drop; + } + /* Use fr_flags to indicate whether succ. flogi resp or not */ + fr_flags(fp) = 0; + fr_dev(fp) = fnic->lport; + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + + skb_queue_tail(&fnic->frame_queue, skb); + queue_work(fnic_event_queue, &fnic->frame_work); + + return; +drop: + dev_kfree_skb_irq(skb); +} + +static int fnic_rq_cmpl_handler_cont(struct vnic_dev *vdev, + struct cq_desc *cq_desc, u8 type, + u16 q_number, u16 completed_index, + void *opaque) +{ + struct fnic *fnic = vnic_dev_priv(vdev); + + vnic_rq_service(&fnic->rq[q_number], cq_desc, completed_index, + VNIC_RQ_RETURN_DESC, fnic_rq_cmpl_frame_recv, + NULL); + return 0; +} + +int fnic_rq_cmpl_handler(struct fnic *fnic, int rq_work_to_do) +{ + unsigned int tot_rq_work_done = 0, cur_work_done; + unsigned int i; + int err; + + for (i = 0; i < fnic->rq_count; i++) { + cur_work_done = vnic_cq_service(&fnic->cq[i], rq_work_to_do, + fnic_rq_cmpl_handler_cont, + NULL); + if (cur_work_done) { + err = vnic_rq_fill(&fnic->rq[i], fnic_alloc_rq_frame); + if (err) + shost_printk(KERN_ERR, fnic->lport->host, + "fnic_alloc_rq_frame cant alloc" + " frame\n"); + } + tot_rq_work_done += cur_work_done; + } + + return tot_rq_work_done; +} + +/* + * This function is called once at init time to allocate and fill RQ + * buffers. Subsequently, it is called in the interrupt context after RQ + * buffer processing to replenish the buffers in the RQ + */ +int fnic_alloc_rq_frame(struct vnic_rq *rq) +{ + struct fnic *fnic = vnic_dev_priv(rq->vdev); + struct sk_buff *skb; + u16 len; + dma_addr_t pa; + + len = FC_FRAME_HEADROOM + FC_MAX_FRAME + FC_FRAME_TAILROOM; + skb = dev_alloc_skb(len); + if (!skb) { + FNIC_FCS_DBG(KERN_DEBUG, fnic->lport->host, + "Unable to allocate RQ sk_buff\n"); + return -ENOMEM; + } + skb_reset_mac_header(skb); + skb_reset_transport_header(skb); + skb_reset_network_header(skb); + skb_put(skb, len); + pa = pci_map_single(fnic->pdev, skb->data, len, PCI_DMA_FROMDEVICE); + fnic_queue_rq_desc(rq, skb, pa, len); + return 0; +} + +void fnic_free_rq_buf(struct vnic_rq *rq, struct vnic_rq_buf *buf) +{ + struct fc_frame *fp = buf->os_buf; + struct fnic *fnic = vnic_dev_priv(rq->vdev); + + pci_unmap_single(fnic->pdev, buf->dma_addr, buf->len, + PCI_DMA_FROMDEVICE); + + dev_kfree_skb(fp_skb(fp)); + buf->os_buf = NULL; +} + +static inline int is_flogi_frame(struct fc_frame_header *fh) +{ + return fh->fh_r_ctl == FC_RCTL_ELS_REQ && *(u8 *)(fh + 1) == ELS_FLOGI; +} + +int fnic_send_frame(struct fnic *fnic, struct fc_frame *fp) +{ + struct vnic_wq *wq = &fnic->wq[0]; + struct sk_buff *skb; + dma_addr_t pa; + struct ethhdr *eth_hdr; + struct vlan_ethhdr *vlan_hdr; + struct fcoe_hdr *fcoe_hdr; + struct fc_frame_header *fh; + u32 tot_len, eth_hdr_len; + int ret = 0; + unsigned long flags; + + fh = fc_frame_header_get(fp); + skb = fp_skb(fp); + + if (!fnic->vlan_hw_insert) { + eth_hdr_len = sizeof(*vlan_hdr) + sizeof(*fcoe_hdr); + vlan_hdr = (struct vlan_ethhdr *)skb_push(skb, eth_hdr_len); + eth_hdr = (struct ethhdr *)vlan_hdr; + vlan_hdr->h_vlan_proto = htons(ETH_P_8021Q); + vlan_hdr->h_vlan_encapsulated_proto = htons(ETH_P_FCOE); + vlan_hdr->h_vlan_TCI = htons(fnic->vlan_id); + fcoe_hdr = (struct fcoe_hdr *)(vlan_hdr + 1); + } else { + eth_hdr_len = sizeof(*eth_hdr) + sizeof(*fcoe_hdr); + eth_hdr = (struct ethhdr *)skb_push(skb, eth_hdr_len); + eth_hdr->h_proto = htons(ETH_P_FCOE); + fcoe_hdr = (struct fcoe_hdr *)(eth_hdr + 1); + } + + if (is_flogi_frame(fh)) { + fc_fcoe_set_mac(eth_hdr->h_dest, fh->fh_d_id); + memcpy(eth_hdr->h_source, fnic->mac_addr, ETH_ALEN); + } else { + if (fnic->fcoui_mode) + fc_fcoe_set_mac(eth_hdr->h_dest, fh->fh_d_id); + else + memcpy(eth_hdr->h_dest, fnic->dest_addr, ETH_ALEN); + memcpy(eth_hdr->h_source, fnic->data_src_addr, ETH_ALEN); + } + + tot_len = skb->len; + BUG_ON(tot_len % 4); + + memset(fcoe_hdr, 0, sizeof(*fcoe_hdr)); + fcoe_hdr->fcoe_sof = fr_sof(fp); + if (FC_FCOE_VER) + FC_FCOE_ENCAPS_VER(fcoe_hdr, FC_FCOE_VER); + + pa = pci_map_single(fnic->pdev, eth_hdr, tot_len, PCI_DMA_TODEVICE); + + spin_lock_irqsave(&fnic->wq_lock[0], flags); + + if (!vnic_wq_desc_avail(wq)) { + pci_unmap_single(fnic->pdev, pa, + tot_len, PCI_DMA_TODEVICE); + ret = -1; + goto fnic_send_frame_end; + } + + fnic_queue_wq_desc(wq, skb, pa, tot_len, fr_eof(fp), + fnic->vlan_hw_insert, fnic->vlan_id, 1, 1, 1); +fnic_send_frame_end: + spin_unlock_irqrestore(&fnic->wq_lock[0], flags); + + if (ret) + dev_kfree_skb_any(fp_skb(fp)); + + return ret; +} + +/* + * fnic_send + * Routine to send a raw frame + */ +int fnic_send(struct fc_lport *lp, struct fc_frame *fp) +{ + struct fnic *fnic = lport_priv(lp); + struct fc_frame_header *fh; + int ret = 0; + enum fnic_state old_state; + unsigned long flags; + struct fc_frame *old_flogi = NULL; + struct fc_frame *old_flogi_resp = NULL; + + if (fnic->in_remove) { + dev_kfree_skb(fp_skb(fp)); + ret = -1; + goto fnic_send_end; + } + + fh = fc_frame_header_get(fp); + /* if not an Flogi frame, send it out, this is the common case */ + if (!is_flogi_frame(fh)) + return fnic_send_frame(fnic, fp); + + /* Flogi frame, now enter the state machine */ + + spin_lock_irqsave(&fnic->fnic_lock, flags); +again: + /* Get any old cached frames, free them after dropping lock */ + old_flogi = fnic->flogi; + fnic->flogi = NULL; + old_flogi_resp = fnic->flogi_resp; + fnic->flogi_resp = NULL; + + fnic->flogi_oxid = FC_XID_UNKNOWN; + + old_state = fnic->state; + switch (old_state) { + case FNIC_IN_FC_MODE: + case FNIC_IN_ETH_TRANS_FC_MODE: + default: + fnic->state = FNIC_IN_FC_TRANS_ETH_MODE; + vnic_dev_del_addr(fnic->vdev, fnic->data_src_addr); + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + + if (old_flogi) { + dev_kfree_skb(fp_skb(old_flogi)); + old_flogi = NULL; + } + if (old_flogi_resp) { + dev_kfree_skb(fp_skb(old_flogi_resp)); + old_flogi_resp = NULL; + } + + ret = fnic_fw_reset_handler(fnic); + + spin_lock_irqsave(&fnic->fnic_lock, flags); + if (fnic->state != FNIC_IN_FC_TRANS_ETH_MODE) + goto again; + if (ret) { + fnic->state = old_state; + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + dev_kfree_skb(fp_skb(fp)); + goto fnic_send_end; + } + old_flogi = fnic->flogi; + fnic->flogi = fp; + fnic->flogi_oxid = ntohs(fh->fh_ox_id); + old_flogi_resp = fnic->flogi_resp; + fnic->flogi_resp = NULL; + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + break; + + case FNIC_IN_FC_TRANS_ETH_MODE: + /* + * A reset is pending with the firmware. Store the flogi + * and its oxid. The transition out of this state happens + * only when Firmware completes the reset, either with + * success or failed. If success, transition to + * FNIC_IN_ETH_MODE, if fail, then transition to + * FNIC_IN_FC_MODE + */ + fnic->flogi = fp; + fnic->flogi_oxid = ntohs(fh->fh_ox_id); + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + break; + + case FNIC_IN_ETH_MODE: + /* + * The fw/hw is already in eth mode. Store the oxid, + * and send the flogi frame out. The transition out of this + * state happens only we receive flogi response from the + * network, and the oxid matches the cached oxid when the + * flogi frame was sent out. If they match, then we issue + * a flogi_reg request and transition to state + * FNIC_IN_ETH_TRANS_FC_MODE + */ + fnic->flogi_oxid = ntohs(fh->fh_ox_id); + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + ret = fnic_send_frame(fnic, fp); + break; + } + +fnic_send_end: + if (old_flogi) + dev_kfree_skb(fp_skb(old_flogi)); + if (old_flogi_resp) + dev_kfree_skb(fp_skb(old_flogi_resp)); + return ret; +} + +static void fnic_wq_complete_frame_send(struct vnic_wq *wq, + struct cq_desc *cq_desc, + struct vnic_wq_buf *buf, void *opaque) +{ + struct sk_buff *skb = buf->os_buf; + struct fc_frame *fp = (struct fc_frame *)skb; + struct fnic *fnic = vnic_dev_priv(wq->vdev); + + pci_unmap_single(fnic->pdev, buf->dma_addr, + buf->len, PCI_DMA_TODEVICE); + dev_kfree_skb_irq(fp_skb(fp)); + buf->os_buf = NULL; +} + +static int fnic_wq_cmpl_handler_cont(struct vnic_dev *vdev, + struct cq_desc *cq_desc, u8 type, + u16 q_number, u16 completed_index, + void *opaque) +{ + struct fnic *fnic = vnic_dev_priv(vdev); + unsigned long flags; + + spin_lock_irqsave(&fnic->wq_lock[q_number], flags); + vnic_wq_service(&fnic->wq[q_number], cq_desc, completed_index, + fnic_wq_complete_frame_send, NULL); + spin_unlock_irqrestore(&fnic->wq_lock[q_number], flags); + + return 0; +} + +int fnic_wq_cmpl_handler(struct fnic *fnic, int work_to_do) +{ + unsigned int wq_work_done = 0; + unsigned int i; + + for (i = 0; i < fnic->raw_wq_count; i++) { + wq_work_done += vnic_cq_service(&fnic->cq[fnic->rq_count+i], + work_to_do, + fnic_wq_cmpl_handler_cont, + NULL); + } + + return wq_work_done; +} + + +void fnic_free_wq_buf(struct vnic_wq *wq, struct vnic_wq_buf *buf) +{ + struct fc_frame *fp = buf->os_buf; + struct fnic *fnic = vnic_dev_priv(wq->vdev); + + pci_unmap_single(fnic->pdev, buf->dma_addr, + buf->len, PCI_DMA_TODEVICE); + + dev_kfree_skb(fp_skb(fp)); + buf->os_buf = NULL; +} diff --git a/drivers/scsi/fnic/fnic_io.h b/drivers/scsi/fnic/fnic_io.h new file mode 100644 index 00000000000..f0b896988cd --- /dev/null +++ b/drivers/scsi/fnic/fnic_io.h @@ -0,0 +1,67 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef _FNIC_IO_H_ +#define _FNIC_IO_H_ + +#include + +#define FNIC_DFLT_SG_DESC_CNT 32 +#define FNIC_MAX_SG_DESC_CNT 1024 /* Maximum descriptors per sgl */ +#define FNIC_SG_DESC_ALIGN 16 /* Descriptor address alignment */ + +struct host_sg_desc { + __le64 addr; + __le32 len; + u32 _resvd; +}; + +struct fnic_dflt_sgl_list { + struct host_sg_desc sg_desc[FNIC_DFLT_SG_DESC_CNT]; +}; + +struct fnic_sgl_list { + struct host_sg_desc sg_desc[FNIC_MAX_SG_DESC_CNT]; +}; + +enum fnic_sgl_list_type { + FNIC_SGL_CACHE_DFLT = 0, /* cache with default size sgl */ + FNIC_SGL_CACHE_MAX, /* cache with max size sgl */ + FNIC_SGL_NUM_CACHES /* number of sgl caches */ +}; + +enum fnic_ioreq_state { + FNIC_IOREQ_CMD_PENDING = 0, + FNIC_IOREQ_ABTS_PENDING, + FNIC_IOREQ_ABTS_COMPLETE, + FNIC_IOREQ_CMD_COMPLETE, +}; + +struct fnic_io_req { + struct host_sg_desc *sgl_list; /* sgl list */ + void *sgl_list_alloc; /* sgl list address used for free */ + dma_addr_t sense_buf_pa; /* dma address for sense buffer*/ + dma_addr_t sgl_list_pa; /* dma address for sgl list */ + u16 sgl_cnt; + u8 sgl_type; /* device DMA descriptor list type */ + u8 io_completed:1; /* set to 1 when fw completes IO */ + u32 port_id; /* remote port DID */ + struct completion *abts_done; /* completion for abts */ + struct completion *dr_done; /* completion for device reset */ +}; + +#endif /* _FNIC_IO_H_ */ diff --git a/drivers/scsi/fnic/fnic_isr.c b/drivers/scsi/fnic/fnic_isr.c new file mode 100644 index 00000000000..2b3064828ae --- /dev/null +++ b/drivers/scsi/fnic/fnic_isr.c @@ -0,0 +1,332 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#include +#include +#include +#include +#include +#include +#include "vnic_dev.h" +#include "vnic_intr.h" +#include "vnic_stats.h" +#include "fnic_io.h" +#include "fnic.h" + +static irqreturn_t fnic_isr_legacy(int irq, void *data) +{ + struct fnic *fnic = data; + u32 pba; + unsigned long work_done = 0; + + pba = vnic_intr_legacy_pba(fnic->legacy_pba); + if (!pba) + return IRQ_NONE; + + if (pba & (1 << FNIC_INTX_NOTIFY)) { + vnic_intr_return_all_credits(&fnic->intr[FNIC_INTX_NOTIFY]); + fnic_handle_link_event(fnic); + } + + if (pba & (1 << FNIC_INTX_ERR)) { + vnic_intr_return_all_credits(&fnic->intr[FNIC_INTX_ERR]); + fnic_log_q_error(fnic); + } + + if (pba & (1 << FNIC_INTX_WQ_RQ_COPYWQ)) { + work_done += fnic_wq_copy_cmpl_handler(fnic, 8); + work_done += fnic_wq_cmpl_handler(fnic, 4); + work_done += fnic_rq_cmpl_handler(fnic, 4); + + vnic_intr_return_credits(&fnic->intr[FNIC_INTX_WQ_RQ_COPYWQ], + work_done, + 1 /* unmask intr */, + 1 /* reset intr timer */); + } + + return IRQ_HANDLED; +} + +static irqreturn_t fnic_isr_msi(int irq, void *data) +{ + struct fnic *fnic = data; + unsigned long work_done = 0; + + work_done += fnic_wq_copy_cmpl_handler(fnic, 8); + work_done += fnic_wq_cmpl_handler(fnic, 4); + work_done += fnic_rq_cmpl_handler(fnic, 4); + + vnic_intr_return_credits(&fnic->intr[0], + work_done, + 1 /* unmask intr */, + 1 /* reset intr timer */); + + return IRQ_HANDLED; +} + +static irqreturn_t fnic_isr_msix_rq(int irq, void *data) +{ + struct fnic *fnic = data; + unsigned long rq_work_done = 0; + + rq_work_done = fnic_rq_cmpl_handler(fnic, 4); + vnic_intr_return_credits(&fnic->intr[FNIC_MSIX_RQ], + rq_work_done, + 1 /* unmask intr */, + 1 /* reset intr timer */); + + return IRQ_HANDLED; +} + +static irqreturn_t fnic_isr_msix_wq(int irq, void *data) +{ + struct fnic *fnic = data; + unsigned long wq_work_done = 0; + + wq_work_done = fnic_wq_cmpl_handler(fnic, 4); + vnic_intr_return_credits(&fnic->intr[FNIC_MSIX_WQ], + wq_work_done, + 1 /* unmask intr */, + 1 /* reset intr timer */); + return IRQ_HANDLED; +} + +static irqreturn_t fnic_isr_msix_wq_copy(int irq, void *data) +{ + struct fnic *fnic = data; + unsigned long wq_copy_work_done = 0; + + wq_copy_work_done = fnic_wq_copy_cmpl_handler(fnic, 8); + vnic_intr_return_credits(&fnic->intr[FNIC_MSIX_WQ_COPY], + wq_copy_work_done, + 1 /* unmask intr */, + 1 /* reset intr timer */); + return IRQ_HANDLED; +} + +static irqreturn_t fnic_isr_msix_err_notify(int irq, void *data) +{ + struct fnic *fnic = data; + + vnic_intr_return_all_credits(&fnic->intr[FNIC_MSIX_ERR_NOTIFY]); + fnic_log_q_error(fnic); + fnic_handle_link_event(fnic); + + return IRQ_HANDLED; +} + +void fnic_free_intr(struct fnic *fnic) +{ + int i; + + switch (vnic_dev_get_intr_mode(fnic->vdev)) { + case VNIC_DEV_INTR_MODE_INTX: + case VNIC_DEV_INTR_MODE_MSI: + free_irq(fnic->pdev->irq, fnic); + break; + + case VNIC_DEV_INTR_MODE_MSIX: + for (i = 0; i < ARRAY_SIZE(fnic->msix); i++) + if (fnic->msix[i].requested) + free_irq(fnic->msix_entry[i].vector, + fnic->msix[i].devid); + break; + + default: + break; + } +} + +int fnic_request_intr(struct fnic *fnic) +{ + int err = 0; + int i; + + switch (vnic_dev_get_intr_mode(fnic->vdev)) { + + case VNIC_DEV_INTR_MODE_INTX: + err = request_irq(fnic->pdev->irq, &fnic_isr_legacy, + IRQF_SHARED, DRV_NAME, fnic); + break; + + case VNIC_DEV_INTR_MODE_MSI: + err = request_irq(fnic->pdev->irq, &fnic_isr_msi, + 0, fnic->name, fnic); + break; + + case VNIC_DEV_INTR_MODE_MSIX: + + sprintf(fnic->msix[FNIC_MSIX_RQ].devname, + "%.11s-fcs-rq", fnic->name); + fnic->msix[FNIC_MSIX_RQ].isr = fnic_isr_msix_rq; + fnic->msix[FNIC_MSIX_RQ].devid = fnic; + + sprintf(fnic->msix[FNIC_MSIX_WQ].devname, + "%.11s-fcs-wq", fnic->name); + fnic->msix[FNIC_MSIX_WQ].isr = fnic_isr_msix_wq; + fnic->msix[FNIC_MSIX_WQ].devid = fnic; + + sprintf(fnic->msix[FNIC_MSIX_WQ_COPY].devname, + "%.11s-scsi-wq", fnic->name); + fnic->msix[FNIC_MSIX_WQ_COPY].isr = fnic_isr_msix_wq_copy; + fnic->msix[FNIC_MSIX_WQ_COPY].devid = fnic; + + sprintf(fnic->msix[FNIC_MSIX_ERR_NOTIFY].devname, + "%.11s-err-notify", fnic->name); + fnic->msix[FNIC_MSIX_ERR_NOTIFY].isr = + fnic_isr_msix_err_notify; + fnic->msix[FNIC_MSIX_ERR_NOTIFY].devid = fnic; + + for (i = 0; i < ARRAY_SIZE(fnic->msix); i++) { + err = request_irq(fnic->msix_entry[i].vector, + fnic->msix[i].isr, 0, + fnic->msix[i].devname, + fnic->msix[i].devid); + if (err) { + shost_printk(KERN_ERR, fnic->lport->host, + "MSIX: request_irq" + " failed %d\n", err); + fnic_free_intr(fnic); + break; + } + fnic->msix[i].requested = 1; + } + break; + + default: + break; + } + + return err; +} + +int fnic_set_intr_mode(struct fnic *fnic) +{ + unsigned int n = ARRAY_SIZE(fnic->rq); + unsigned int m = ARRAY_SIZE(fnic->wq); + unsigned int o = ARRAY_SIZE(fnic->wq_copy); + unsigned int i; + + /* + * Set interrupt mode (INTx, MSI, MSI-X) depending + * system capabilities. + * + * Try MSI-X first + * + * We need n RQs, m WQs, o Copy WQs, n+m+o CQs, and n+m+o+1 INTRs + * (last INTR is used for WQ/RQ errors and notification area) + */ + + BUG_ON(ARRAY_SIZE(fnic->msix_entry) < n + m + o + 1); + for (i = 0; i < n + m + o + 1; i++) + fnic->msix_entry[i].entry = i; + + if (fnic->rq_count >= n && + fnic->raw_wq_count >= m && + fnic->wq_copy_count >= o && + fnic->cq_count >= n + m + o) { + if (!pci_enable_msix(fnic->pdev, fnic->msix_entry, + n + m + o + 1)) { + fnic->rq_count = n; + fnic->raw_wq_count = m; + fnic->wq_copy_count = o; + fnic->wq_count = m + o; + fnic->cq_count = n + m + o; + fnic->intr_count = n + m + o + 1; + fnic->err_intr_offset = FNIC_MSIX_ERR_NOTIFY; + + FNIC_ISR_DBG(KERN_DEBUG, fnic->lport->host, + "Using MSI-X Interrupts\n"); + vnic_dev_set_intr_mode(fnic->vdev, + VNIC_DEV_INTR_MODE_MSIX); + return 0; + } + } + + /* + * Next try MSI + * We need 1 RQ, 1 WQ, 1 WQ_COPY, 3 CQs, and 1 INTR + */ + if (fnic->rq_count >= 1 && + fnic->raw_wq_count >= 1 && + fnic->wq_copy_count >= 1 && + fnic->cq_count >= 3 && + fnic->intr_count >= 1 && + !pci_enable_msi(fnic->pdev)) { + + fnic->rq_count = 1; + fnic->raw_wq_count = 1; + fnic->wq_copy_count = 1; + fnic->wq_count = 2; + fnic->cq_count = 3; + fnic->intr_count = 1; + fnic->err_intr_offset = 0; + + FNIC_ISR_DBG(KERN_DEBUG, fnic->lport->host, + "Using MSI Interrupts\n"); + vnic_dev_set_intr_mode(fnic->vdev, VNIC_DEV_INTR_MODE_MSI); + + return 0; + } + + /* + * Next try INTx + * We need 1 RQ, 1 WQ, 1 WQ_COPY, 3 CQs, and 3 INTRs + * 1 INTR is used for all 3 queues, 1 INTR for queue errors + * 1 INTR for notification area + */ + + if (fnic->rq_count >= 1 && + fnic->raw_wq_count >= 1 && + fnic->wq_copy_count >= 1 && + fnic->cq_count >= 3 && + fnic->intr_count >= 3) { + + fnic->rq_count = 1; + fnic->raw_wq_count = 1; + fnic->wq_copy_count = 1; + fnic->cq_count = 3; + fnic->intr_count = 3; + + FNIC_ISR_DBG(KERN_DEBUG, fnic->lport->host, + "Using Legacy Interrupts\n"); + vnic_dev_set_intr_mode(fnic->vdev, VNIC_DEV_INTR_MODE_INTX); + + return 0; + } + + vnic_dev_set_intr_mode(fnic->vdev, VNIC_DEV_INTR_MODE_UNKNOWN); + + return -EINVAL; +} + +void fnic_clear_intr_mode(struct fnic *fnic) +{ + switch (vnic_dev_get_intr_mode(fnic->vdev)) { + case VNIC_DEV_INTR_MODE_MSIX: + pci_disable_msix(fnic->pdev); + break; + case VNIC_DEV_INTR_MODE_MSI: + pci_disable_msi(fnic->pdev); + break; + default: + break; + } + + vnic_dev_set_intr_mode(fnic->vdev, VNIC_DEV_INTR_MODE_INTX); +} + diff --git a/drivers/scsi/fnic/fnic_main.c b/drivers/scsi/fnic/fnic_main.c new file mode 100644 index 00000000000..32ef6b87d89 --- /dev/null +++ b/drivers/scsi/fnic/fnic_main.c @@ -0,0 +1,942 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "vnic_dev.h" +#include "vnic_intr.h" +#include "vnic_stats.h" +#include "fnic_io.h" +#include "fnic.h" + +#define PCI_DEVICE_ID_CISCO_FNIC 0x0045 + +/* Timer to poll notification area for events. Used for MSI interrupts */ +#define FNIC_NOTIFY_TIMER_PERIOD (2 * HZ) + +static struct kmem_cache *fnic_sgl_cache[FNIC_SGL_NUM_CACHES]; +static struct kmem_cache *fnic_io_req_cache; +LIST_HEAD(fnic_list); +DEFINE_SPINLOCK(fnic_list_lock); + +/* Supported devices by fnic module */ +static struct pci_device_id fnic_id_table[] = { + { PCI_DEVICE(PCI_VENDOR_ID_CISCO, PCI_DEVICE_ID_CISCO_FNIC) }, + { 0, } +}; + +MODULE_DESCRIPTION(DRV_DESCRIPTION); +MODULE_AUTHOR("Abhijeet Joglekar , " + "Joseph R. Eykholt "); +MODULE_LICENSE("GPL v2"); +MODULE_VERSION(DRV_VERSION); +MODULE_DEVICE_TABLE(pci, fnic_id_table); + +unsigned int fnic_log_level; +module_param(fnic_log_level, int, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(fnic_log_level, "bit mask of fnic logging levels"); + + +static struct libfc_function_template fnic_transport_template = { + .frame_send = fnic_send, + .fcp_abort_io = fnic_empty_scsi_cleanup, + .fcp_cleanup = fnic_empty_scsi_cleanup, + .exch_mgr_reset = fnic_exch_mgr_reset +}; + +static int fnic_slave_alloc(struct scsi_device *sdev) +{ + struct fc_rport *rport = starget_to_rport(scsi_target(sdev)); + struct fc_lport *lp = shost_priv(sdev->host); + struct fnic *fnic = lport_priv(lp); + + sdev->tagged_supported = 1; + + if (!rport || fc_remote_port_chkready(rport)) + return -ENXIO; + + scsi_activate_tcq(sdev, FNIC_DFLT_QUEUE_DEPTH); + rport->dev_loss_tmo = fnic->config.port_down_timeout / 1000; + + return 0; +} + +static struct scsi_host_template fnic_host_template = { + .module = THIS_MODULE, + .name = DRV_NAME, + .queuecommand = fnic_queuecommand, + .eh_abort_handler = fnic_abort_cmd, + .eh_device_reset_handler = fnic_device_reset, + .eh_host_reset_handler = fnic_host_reset, + .slave_alloc = fnic_slave_alloc, + .change_queue_depth = fc_change_queue_depth, + .change_queue_type = fc_change_queue_type, + .this_id = -1, + .cmd_per_lun = 3, + .can_queue = FNIC_MAX_IO_REQ, + .use_clustering = ENABLE_CLUSTERING, + .sg_tablesize = FNIC_MAX_SG_DESC_CNT, + .max_sectors = 0xffff, + .shost_attrs = fnic_attrs, +}; + +static void fnic_get_host_speed(struct Scsi_Host *shost); +static struct scsi_transport_template *fnic_fc_transport; +static struct fc_host_statistics *fnic_get_stats(struct Scsi_Host *); + +static struct fc_function_template fnic_fc_functions = { + + .show_host_node_name = 1, + .show_host_port_name = 1, + .show_host_supported_classes = 1, + .show_host_supported_fc4s = 1, + .show_host_active_fc4s = 1, + .show_host_maxframe_size = 1, + .show_host_port_id = 1, + .show_host_supported_speeds = 1, + .get_host_speed = fnic_get_host_speed, + .show_host_speed = 1, + .show_host_port_type = 1, + .get_host_port_state = fc_get_host_port_state, + .show_host_port_state = 1, + .show_host_symbolic_name = 1, + .show_rport_maxframe_size = 1, + .show_rport_supported_classes = 1, + .show_host_fabric_name = 1, + .show_starget_node_name = 1, + .show_starget_port_name = 1, + .show_starget_port_id = 1, + .show_rport_dev_loss_tmo = 1, + .issue_fc_host_lip = fnic_reset, + .get_fc_host_stats = fnic_get_stats, + .dd_fcrport_size = sizeof(struct fc_rport_libfc_priv), + .terminate_rport_io = fnic_terminate_rport_io, +}; + +static void fnic_get_host_speed(struct Scsi_Host *shost) +{ + struct fc_lport *lp = shost_priv(shost); + struct fnic *fnic = lport_priv(lp); + u32 port_speed = vnic_dev_port_speed(fnic->vdev); + + /* Add in other values as they get defined in fw */ + switch (port_speed) { + case 10000: + fc_host_speed(shost) = FC_PORTSPEED_10GBIT; + break; + default: + fc_host_speed(shost) = FC_PORTSPEED_10GBIT; + break; + } +} + +static struct fc_host_statistics *fnic_get_stats(struct Scsi_Host *host) +{ + int ret; + struct fc_lport *lp = shost_priv(host); + struct fnic *fnic = lport_priv(lp); + struct fc_host_statistics *stats = &lp->host_stats; + struct vnic_stats *vs; + unsigned long flags; + + if (time_before(jiffies, fnic->stats_time + HZ / FNIC_STATS_RATE_LIMIT)) + return stats; + fnic->stats_time = jiffies; + + spin_lock_irqsave(&fnic->fnic_lock, flags); + ret = vnic_dev_stats_dump(fnic->vdev, &fnic->stats); + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + + if (ret) { + FNIC_MAIN_DBG(KERN_DEBUG, fnic->lport->host, + "fnic: Get vnic stats failed" + " 0x%x", ret); + return stats; + } + vs = fnic->stats; + stats->tx_frames = vs->tx.tx_unicast_frames_ok; + stats->tx_words = vs->tx.tx_unicast_bytes_ok / 4; + stats->rx_frames = vs->rx.rx_unicast_frames_ok; + stats->rx_words = vs->rx.rx_unicast_bytes_ok / 4; + stats->error_frames = vs->tx.tx_errors + vs->rx.rx_errors; + stats->dumped_frames = vs->tx.tx_drops + vs->rx.rx_drop; + stats->invalid_crc_count = vs->rx.rx_crc_errors; + stats->seconds_since_last_reset = (jiffies - lp->boot_time) / HZ; + stats->fcp_input_megabytes = div_u64(fnic->fcp_input_bytes, 1000000); + stats->fcp_output_megabytes = div_u64(fnic->fcp_output_bytes, 1000000); + + return stats; +} + +void fnic_log_q_error(struct fnic *fnic) +{ + unsigned int i; + u32 error_status; + + for (i = 0; i < fnic->raw_wq_count; i++) { + error_status = ioread32(&fnic->wq[i].ctrl->error_status); + if (error_status) + shost_printk(KERN_ERR, fnic->lport->host, + "WQ[%d] error_status" + " %d\n", i, error_status); + } + + for (i = 0; i < fnic->rq_count; i++) { + error_status = ioread32(&fnic->rq[i].ctrl->error_status); + if (error_status) + shost_printk(KERN_ERR, fnic->lport->host, + "RQ[%d] error_status" + " %d\n", i, error_status); + } + + for (i = 0; i < fnic->wq_copy_count; i++) { + error_status = ioread32(&fnic->wq_copy[i].ctrl->error_status); + if (error_status) + shost_printk(KERN_ERR, fnic->lport->host, + "CWQ[%d] error_status" + " %d\n", i, error_status); + } +} + +void fnic_handle_link_event(struct fnic *fnic) +{ + unsigned long flags; + + spin_lock_irqsave(&fnic->fnic_lock, flags); + if (fnic->stop_rx_link_events) { + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + return; + } + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + + queue_work(fnic_event_queue, &fnic->link_work); + +} + +static int fnic_notify_set(struct fnic *fnic) +{ + int err; + + switch (vnic_dev_get_intr_mode(fnic->vdev)) { + case VNIC_DEV_INTR_MODE_INTX: + err = vnic_dev_notify_set(fnic->vdev, FNIC_INTX_NOTIFY); + break; + case VNIC_DEV_INTR_MODE_MSI: + err = vnic_dev_notify_set(fnic->vdev, -1); + break; + case VNIC_DEV_INTR_MODE_MSIX: + err = vnic_dev_notify_set(fnic->vdev, FNIC_MSIX_ERR_NOTIFY); + break; + default: + shost_printk(KERN_ERR, fnic->lport->host, + "Interrupt mode should be set up" + " before devcmd notify set %d\n", + vnic_dev_get_intr_mode(fnic->vdev)); + err = -1; + break; + } + + return err; +} + +static void fnic_notify_timer(unsigned long data) +{ + struct fnic *fnic = (struct fnic *)data; + + fnic_handle_link_event(fnic); + mod_timer(&fnic->notify_timer, + round_jiffies(jiffies + FNIC_NOTIFY_TIMER_PERIOD)); +} + +static void fnic_notify_timer_start(struct fnic *fnic) +{ + switch (vnic_dev_get_intr_mode(fnic->vdev)) { + case VNIC_DEV_INTR_MODE_MSI: + /* + * Schedule first timeout immediately. The driver is + * initiatialized and ready to look for link up notification + */ + mod_timer(&fnic->notify_timer, jiffies); + break; + default: + /* Using intr for notification for INTx/MSI-X */ + break; + }; +} + +static int fnic_dev_wait(struct vnic_dev *vdev, + int (*start)(struct vnic_dev *, int), + int (*finished)(struct vnic_dev *, int *), + int arg) +{ + unsigned long time; + int done; + int err; + + err = start(vdev, arg); + if (err) + return err; + + /* Wait for func to complete...2 seconds max */ + time = jiffies + (HZ * 2); + do { + err = finished(vdev, &done); + if (err) + return err; + if (done) + return 0; + schedule_timeout_uninterruptible(HZ / 10); + } while (time_after(time, jiffies)); + + return -ETIMEDOUT; +} + +static int fnic_cleanup(struct fnic *fnic) +{ + unsigned int i; + int err; + unsigned long flags; + struct fc_frame *flogi = NULL; + struct fc_frame *flogi_resp = NULL; + + vnic_dev_disable(fnic->vdev); + for (i = 0; i < fnic->intr_count; i++) + vnic_intr_mask(&fnic->intr[i]); + + for (i = 0; i < fnic->rq_count; i++) { + err = vnic_rq_disable(&fnic->rq[i]); + if (err) + return err; + } + for (i = 0; i < fnic->raw_wq_count; i++) { + err = vnic_wq_disable(&fnic->wq[i]); + if (err) + return err; + } + for (i = 0; i < fnic->wq_copy_count; i++) { + err = vnic_wq_copy_disable(&fnic->wq_copy[i]); + if (err) + return err; + } + + /* Clean up completed IOs and FCS frames */ + fnic_wq_copy_cmpl_handler(fnic, -1); + fnic_wq_cmpl_handler(fnic, -1); + fnic_rq_cmpl_handler(fnic, -1); + + /* Clean up the IOs and FCS frames that have not completed */ + for (i = 0; i < fnic->raw_wq_count; i++) + vnic_wq_clean(&fnic->wq[i], fnic_free_wq_buf); + for (i = 0; i < fnic->rq_count; i++) + vnic_rq_clean(&fnic->rq[i], fnic_free_rq_buf); + for (i = 0; i < fnic->wq_copy_count; i++) + vnic_wq_copy_clean(&fnic->wq_copy[i], + fnic_wq_copy_cleanup_handler); + + for (i = 0; i < fnic->cq_count; i++) + vnic_cq_clean(&fnic->cq[i]); + for (i = 0; i < fnic->intr_count; i++) + vnic_intr_clean(&fnic->intr[i]); + + /* + * Remove cached flogi and flogi resp frames if any + * These frames are not in any queue, and therefore queue + * cleanup does not clean them. So clean them explicitly + */ + spin_lock_irqsave(&fnic->fnic_lock, flags); + flogi = fnic->flogi; + fnic->flogi = NULL; + flogi_resp = fnic->flogi_resp; + fnic->flogi_resp = NULL; + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + + if (flogi) + dev_kfree_skb(fp_skb(flogi)); + + if (flogi_resp) + dev_kfree_skb(fp_skb(flogi_resp)); + + mempool_destroy(fnic->io_req_pool); + for (i = 0; i < FNIC_SGL_NUM_CACHES; i++) + mempool_destroy(fnic->io_sgl_pool[i]); + + return 0; +} + +static void fnic_iounmap(struct fnic *fnic) +{ + if (fnic->bar0.vaddr) + iounmap(fnic->bar0.vaddr); +} + +/* + * Allocate element for mempools requiring GFP_DMA flag. + * Otherwise, checks in kmem_flagcheck() hit BUG_ON(). + */ +static void *fnic_alloc_slab_dma(gfp_t gfp_mask, void *pool_data) +{ + struct kmem_cache *mem = pool_data; + + return kmem_cache_alloc(mem, gfp_mask | GFP_ATOMIC | GFP_DMA); +} + +static int __devinit fnic_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct Scsi_Host *host; + struct fc_lport *lp; + struct fnic *fnic; + mempool_t *pool; + int err; + int i; + unsigned long flags; + + /* + * Allocate SCSI Host and set up association between host, + * local port, and fnic + */ + host = scsi_host_alloc(&fnic_host_template, + sizeof(struct fc_lport) + sizeof(struct fnic)); + if (!host) { + printk(KERN_ERR PFX "Unable to alloc SCSI host\n"); + err = -ENOMEM; + goto err_out; + } + lp = shost_priv(host); + lp->host = host; + fnic = lport_priv(lp); + fnic->lport = lp; + + snprintf(fnic->name, sizeof(fnic->name) - 1, "%s%d", DRV_NAME, + host->host_no); + + host->transportt = fnic_fc_transport; + + err = scsi_init_shared_tag_map(host, FNIC_MAX_IO_REQ); + if (err) { + shost_printk(KERN_ERR, fnic->lport->host, + "Unable to alloc shared tag map\n"); + goto err_out_free_hba; + } + + /* Setup PCI resources */ + pci_set_drvdata(pdev, fnic); + + fnic->pdev = pdev; + + err = pci_enable_device(pdev); + if (err) { + shost_printk(KERN_ERR, fnic->lport->host, + "Cannot enable PCI device, aborting.\n"); + goto err_out_free_hba; + } + + err = pci_request_regions(pdev, DRV_NAME); + if (err) { + shost_printk(KERN_ERR, fnic->lport->host, + "Cannot enable PCI resources, aborting\n"); + goto err_out_disable_device; + } + + pci_set_master(pdev); + + /* Query PCI controller on system for DMA addressing + * limitation for the device. Try 40-bit first, and + * fail to 32-bit. + */ + err = pci_set_dma_mask(pdev, DMA_40BIT_MASK); + if (err) { + err = pci_set_dma_mask(pdev, DMA_32BIT_MASK); + if (err) { + shost_printk(KERN_ERR, fnic->lport->host, + "No usable DMA configuration " + "aborting\n"); + goto err_out_release_regions; + } + err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); + if (err) { + shost_printk(KERN_ERR, fnic->lport->host, + "Unable to obtain 32-bit DMA " + "for consistent allocations, aborting.\n"); + goto err_out_release_regions; + } + } else { + err = pci_set_consistent_dma_mask(pdev, DMA_40BIT_MASK); + if (err) { + shost_printk(KERN_ERR, fnic->lport->host, + "Unable to obtain 40-bit DMA " + "for consistent allocations, aborting.\n"); + goto err_out_release_regions; + } + } + + /* Map vNIC resources from BAR0 */ + if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) { + shost_printk(KERN_ERR, fnic->lport->host, + "BAR0 not memory-map'able, aborting.\n"); + err = -ENODEV; + goto err_out_release_regions; + } + + fnic->bar0.vaddr = pci_iomap(pdev, 0, 0); + fnic->bar0.bus_addr = pci_resource_start(pdev, 0); + fnic->bar0.len = pci_resource_len(pdev, 0); + + if (!fnic->bar0.vaddr) { + shost_printk(KERN_ERR, fnic->lport->host, + "Cannot memory-map BAR0 res hdr, " + "aborting.\n"); + err = -ENODEV; + goto err_out_release_regions; + } + + fnic->vdev = vnic_dev_register(NULL, fnic, pdev, &fnic->bar0); + if (!fnic->vdev) { + shost_printk(KERN_ERR, fnic->lport->host, + "vNIC registration failed, " + "aborting.\n"); + err = -ENODEV; + goto err_out_iounmap; + } + + err = fnic_dev_wait(fnic->vdev, vnic_dev_open, + vnic_dev_open_done, 0); + if (err) { + shost_printk(KERN_ERR, fnic->lport->host, + "vNIC dev open failed, aborting.\n"); + goto err_out_vnic_unregister; + } + + err = vnic_dev_init(fnic->vdev, 0); + if (err) { + shost_printk(KERN_ERR, fnic->lport->host, + "vNIC dev init failed, aborting.\n"); + goto err_out_dev_close; + } + + err = vnic_dev_mac_addr(fnic->vdev, fnic->mac_addr); + if (err) { + shost_printk(KERN_ERR, fnic->lport->host, + "vNIC get MAC addr failed \n"); + goto err_out_dev_close; + } + + /* Get vNIC configuration */ + err = fnic_get_vnic_config(fnic); + if (err) { + shost_printk(KERN_ERR, fnic->lport->host, + "Get vNIC configuration failed, " + "aborting.\n"); + goto err_out_dev_close; + } + host->max_lun = fnic->config.luns_per_tgt; + host->max_id = FNIC_MAX_FCP_TARGET; + + fnic_get_res_counts(fnic); + + err = fnic_set_intr_mode(fnic); + if (err) { + shost_printk(KERN_ERR, fnic->lport->host, + "Failed to set intr mode, " + "aborting.\n"); + goto err_out_dev_close; + } + + err = fnic_request_intr(fnic); + if (err) { + shost_printk(KERN_ERR, fnic->lport->host, + "Unable to request irq.\n"); + goto err_out_clear_intr; + } + + err = fnic_alloc_vnic_resources(fnic); + if (err) { + shost_printk(KERN_ERR, fnic->lport->host, + "Failed to alloc vNIC resources, " + "aborting.\n"); + goto err_out_free_intr; + } + + + /* initialize all fnic locks */ + spin_lock_init(&fnic->fnic_lock); + + for (i = 0; i < FNIC_WQ_MAX; i++) + spin_lock_init(&fnic->wq_lock[i]); + + for (i = 0; i < FNIC_WQ_COPY_MAX; i++) { + spin_lock_init(&fnic->wq_copy_lock[i]); + fnic->wq_copy_desc_low[i] = DESC_CLEAN_LOW_WATERMARK; + fnic->fw_ack_recd[i] = 0; + fnic->fw_ack_index[i] = -1; + } + + for (i = 0; i < FNIC_IO_LOCKS; i++) + spin_lock_init(&fnic->io_req_lock[i]); + + fnic->io_req_pool = mempool_create_slab_pool(2, fnic_io_req_cache); + if (!fnic->io_req_pool) + goto err_out_free_resources; + + pool = mempool_create(2, fnic_alloc_slab_dma, mempool_free_slab, + fnic_sgl_cache[FNIC_SGL_CACHE_DFLT]); + if (!pool) + goto err_out_free_ioreq_pool; + fnic->io_sgl_pool[FNIC_SGL_CACHE_DFLT] = pool; + + pool = mempool_create(2, fnic_alloc_slab_dma, mempool_free_slab, + fnic_sgl_cache[FNIC_SGL_CACHE_MAX]); + if (!pool) + goto err_out_free_dflt_pool; + fnic->io_sgl_pool[FNIC_SGL_CACHE_MAX] = pool; + + /* setup vlan config, hw inserts vlan header */ + fnic->vlan_hw_insert = 1; + fnic->vlan_id = 0; + + fnic->flogi_oxid = FC_XID_UNKNOWN; + fnic->flogi = NULL; + fnic->flogi_resp = NULL; + fnic->state = FNIC_IN_FC_MODE; + + /* Enable hardware stripping of vlan header on ingress */ + fnic_set_nic_config(fnic, 0, 0, 0, 0, 0, 0, 1); + + /* Setup notification buffer area */ + err = fnic_notify_set(fnic); + if (err) { + shost_printk(KERN_ERR, fnic->lport->host, + "Failed to alloc notify buffer, aborting.\n"); + goto err_out_free_max_pool; + } + + /* Setup notify timer when using MSI interrupts */ + if (vnic_dev_get_intr_mode(fnic->vdev) == VNIC_DEV_INTR_MODE_MSI) + setup_timer(&fnic->notify_timer, + fnic_notify_timer, (unsigned long)fnic); + + /* allocate RQ buffers and post them to RQ*/ + for (i = 0; i < fnic->rq_count; i++) { + err = vnic_rq_fill(&fnic->rq[i], fnic_alloc_rq_frame); + if (err) { + shost_printk(KERN_ERR, fnic->lport->host, + "fnic_alloc_rq_frame can't alloc " + "frame\n"); + goto err_out_free_rq_buf; + } + } + + /* + * Initialization done with PCI system, hardware, firmware. + * Add host to SCSI + */ + err = scsi_add_host(lp->host, &pdev->dev); + if (err) { + shost_printk(KERN_ERR, fnic->lport->host, + "fnic: scsi_add_host failed...exiting\n"); + goto err_out_free_rq_buf; + } + + /* Start local port initiatialization */ + + lp->link_up = 0; + lp->tt = fnic_transport_template; + + lp->emp = fc_exch_mgr_alloc(lp, FC_CLASS_3, + FCPIO_HOST_EXCH_RANGE_START, + FCPIO_HOST_EXCH_RANGE_END); + if (!lp->emp) { + err = -ENOMEM; + goto err_out_remove_scsi_host; + } + + lp->max_retry_count = fnic->config.flogi_retries; + lp->service_params = (FCP_SPPF_INIT_FCN | FCP_SPPF_RD_XRDY_DIS | + FCP_SPPF_CONF_COMPL); + if (fnic->config.flags & VFCF_FCP_SEQ_LVL_ERR) + lp->service_params |= FCP_SPPF_RETRY; + + lp->boot_time = jiffies; + lp->e_d_tov = fnic->config.ed_tov; + lp->r_a_tov = fnic->config.ra_tov; + lp->link_supported_speeds = FC_PORTSPEED_10GBIT; + fc_set_wwnn(lp, fnic->config.node_wwn); + fc_set_wwpn(lp, fnic->config.port_wwn); + + fc_exch_init(lp); + fc_lport_init(lp); + fc_elsct_init(lp); + fc_rport_init(lp); + fc_disc_init(lp); + + fc_lport_config(lp); + + if (fc_set_mfs(lp, fnic->config.maxdatafieldsize + + sizeof(struct fc_frame_header))) { + err = -EINVAL; + goto err_out_free_exch_mgr; + } + fc_host_maxframe_size(lp->host) = lp->mfs; + + sprintf(fc_host_symbolic_name(lp->host), + DRV_NAME " v" DRV_VERSION " over %s", fnic->name); + + spin_lock_irqsave(&fnic_list_lock, flags); + list_add_tail(&fnic->list, &fnic_list); + spin_unlock_irqrestore(&fnic_list_lock, flags); + + INIT_WORK(&fnic->link_work, fnic_handle_link); + INIT_WORK(&fnic->frame_work, fnic_handle_frame); + skb_queue_head_init(&fnic->frame_queue); + + /* Enable all queues */ + for (i = 0; i < fnic->raw_wq_count; i++) + vnic_wq_enable(&fnic->wq[i]); + for (i = 0; i < fnic->rq_count; i++) + vnic_rq_enable(&fnic->rq[i]); + for (i = 0; i < fnic->wq_copy_count; i++) + vnic_wq_copy_enable(&fnic->wq_copy[i]); + + fc_fabric_login(lp); + + vnic_dev_enable(fnic->vdev); + for (i = 0; i < fnic->intr_count; i++) + vnic_intr_unmask(&fnic->intr[i]); + + fnic_notify_timer_start(fnic); + + return 0; + +err_out_free_exch_mgr: + fc_exch_mgr_free(lp->emp); +err_out_remove_scsi_host: + fc_remove_host(fnic->lport->host); + scsi_remove_host(fnic->lport->host); +err_out_free_rq_buf: + for (i = 0; i < fnic->rq_count; i++) + vnic_rq_clean(&fnic->rq[i], fnic_free_rq_buf); + vnic_dev_notify_unset(fnic->vdev); +err_out_free_max_pool: + mempool_destroy(fnic->io_sgl_pool[FNIC_SGL_CACHE_MAX]); +err_out_free_dflt_pool: + mempool_destroy(fnic->io_sgl_pool[FNIC_SGL_CACHE_DFLT]); +err_out_free_ioreq_pool: + mempool_destroy(fnic->io_req_pool); +err_out_free_resources: + fnic_free_vnic_resources(fnic); +err_out_free_intr: + fnic_free_intr(fnic); +err_out_clear_intr: + fnic_clear_intr_mode(fnic); +err_out_dev_close: + vnic_dev_close(fnic->vdev); +err_out_vnic_unregister: + vnic_dev_unregister(fnic->vdev); +err_out_iounmap: + fnic_iounmap(fnic); +err_out_release_regions: + pci_release_regions(pdev); +err_out_disable_device: + pci_disable_device(pdev); +err_out_free_hba: + scsi_host_put(lp->host); +err_out: + return err; +} + +static void __devexit fnic_remove(struct pci_dev *pdev) +{ + struct fnic *fnic = pci_get_drvdata(pdev); + unsigned long flags; + + /* + * Mark state so that the workqueue thread stops forwarding + * received frames and link events to the local port. ISR and + * other threads that can queue work items will also stop + * creating work items on the fnic workqueue + */ + spin_lock_irqsave(&fnic->fnic_lock, flags); + fnic->stop_rx_link_events = 1; + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + + if (vnic_dev_get_intr_mode(fnic->vdev) == VNIC_DEV_INTR_MODE_MSI) + del_timer_sync(&fnic->notify_timer); + + /* + * Flush the fnic event queue. After this call, there should + * be no event queued for this fnic device in the workqueue + */ + flush_workqueue(fnic_event_queue); + skb_queue_purge(&fnic->frame_queue); + + /* + * Log off the fabric. This stops all remote ports, dns port, + * logs off the fabric. This flushes all rport, disc, lport work + * before returning + */ + fc_fabric_logoff(fnic->lport); + + spin_lock_irqsave(&fnic->fnic_lock, flags); + fnic->in_remove = 1; + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + + fc_lport_destroy(fnic->lport); + + /* + * This stops the fnic device, masks all interrupts. Completed + * CQ entries are drained. Posted WQ/RQ/Copy-WQ entries are + * cleaned up + */ + fnic_cleanup(fnic); + + BUG_ON(!skb_queue_empty(&fnic->frame_queue)); + + spin_lock_irqsave(&fnic_list_lock, flags); + list_del(&fnic->list); + spin_unlock_irqrestore(&fnic_list_lock, flags); + + fc_remove_host(fnic->lport->host); + scsi_remove_host(fnic->lport->host); + fc_exch_mgr_free(fnic->lport->emp); + vnic_dev_notify_unset(fnic->vdev); + fnic_free_vnic_resources(fnic); + fnic_free_intr(fnic); + fnic_clear_intr_mode(fnic); + vnic_dev_close(fnic->vdev); + vnic_dev_unregister(fnic->vdev); + fnic_iounmap(fnic); + pci_release_regions(pdev); + pci_disable_device(pdev); + pci_set_drvdata(pdev, NULL); + scsi_host_put(fnic->lport->host); +} + +static struct pci_driver fnic_driver = { + .name = DRV_NAME, + .id_table = fnic_id_table, + .probe = fnic_probe, + .remove = __devexit_p(fnic_remove), +}; + +static int __init fnic_init_module(void) +{ + size_t len; + int err = 0; + + printk(KERN_INFO PFX "%s, ver %s\n", DRV_DESCRIPTION, DRV_VERSION); + + /* Create a cache for allocation of default size sgls */ + len = sizeof(struct fnic_dflt_sgl_list); + fnic_sgl_cache[FNIC_SGL_CACHE_DFLT] = kmem_cache_create + ("fnic_sgl_dflt", len + FNIC_SG_DESC_ALIGN, FNIC_SG_DESC_ALIGN, + SLAB_HWCACHE_ALIGN | SLAB_CACHE_DMA, + NULL); + if (!fnic_sgl_cache[FNIC_SGL_CACHE_DFLT]) { + printk(KERN_ERR PFX "failed to create fnic dflt sgl slab\n"); + err = -ENOMEM; + goto err_create_fnic_sgl_slab_dflt; + } + + /* Create a cache for allocation of max size sgls*/ + len = sizeof(struct fnic_sgl_list); + fnic_sgl_cache[FNIC_SGL_CACHE_MAX] = kmem_cache_create + ("fnic_sgl_max", len + FNIC_SG_DESC_ALIGN, FNIC_SG_DESC_ALIGN, + SLAB_HWCACHE_ALIGN | SLAB_CACHE_DMA, + NULL); + if (!fnic_sgl_cache[FNIC_SGL_CACHE_MAX]) { + printk(KERN_ERR PFX "failed to create fnic max sgl slab\n"); + err = -ENOMEM; + goto err_create_fnic_sgl_slab_max; + } + + /* Create a cache of io_req structs for use via mempool */ + fnic_io_req_cache = kmem_cache_create("fnic_io_req", + sizeof(struct fnic_io_req), + 0, SLAB_HWCACHE_ALIGN, NULL); + if (!fnic_io_req_cache) { + printk(KERN_ERR PFX "failed to create fnic io_req slab\n"); + err = -ENOMEM; + goto err_create_fnic_ioreq_slab; + } + + fnic_event_queue = create_singlethread_workqueue("fnic_event_wq"); + if (!fnic_event_queue) { + printk(KERN_ERR PFX "fnic work queue create failed\n"); + err = -ENOMEM; + goto err_create_fnic_workq; + } + + spin_lock_init(&fnic_list_lock); + INIT_LIST_HEAD(&fnic_list); + + fnic_fc_transport = fc_attach_transport(&fnic_fc_functions); + if (!fnic_fc_transport) { + printk(KERN_ERR PFX "fc_attach_transport error\n"); + err = -ENOMEM; + goto err_fc_transport; + } + + /* register the driver with PCI system */ + err = pci_register_driver(&fnic_driver); + if (err < 0) { + printk(KERN_ERR PFX "pci register error\n"); + goto err_pci_register; + } + return err; + +err_pci_register: + fc_release_transport(fnic_fc_transport); +err_fc_transport: + destroy_workqueue(fnic_event_queue); +err_create_fnic_workq: + kmem_cache_destroy(fnic_io_req_cache); +err_create_fnic_ioreq_slab: + kmem_cache_destroy(fnic_sgl_cache[FNIC_SGL_CACHE_MAX]); +err_create_fnic_sgl_slab_max: + kmem_cache_destroy(fnic_sgl_cache[FNIC_SGL_CACHE_DFLT]); +err_create_fnic_sgl_slab_dflt: + return err; +} + +static void __exit fnic_cleanup_module(void) +{ + pci_unregister_driver(&fnic_driver); + destroy_workqueue(fnic_event_queue); + kmem_cache_destroy(fnic_sgl_cache[FNIC_SGL_CACHE_MAX]); + kmem_cache_destroy(fnic_sgl_cache[FNIC_SGL_CACHE_DFLT]); + kmem_cache_destroy(fnic_io_req_cache); + fc_release_transport(fnic_fc_transport); +} + +module_init(fnic_init_module); +module_exit(fnic_cleanup_module); + diff --git a/drivers/scsi/fnic/fnic_res.c b/drivers/scsi/fnic/fnic_res.c new file mode 100644 index 00000000000..7ba61ec715d --- /dev/null +++ b/drivers/scsi/fnic/fnic_res.c @@ -0,0 +1,444 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#include +#include +#include +#include "wq_enet_desc.h" +#include "rq_enet_desc.h" +#include "cq_enet_desc.h" +#include "vnic_resource.h" +#include "vnic_dev.h" +#include "vnic_wq.h" +#include "vnic_rq.h" +#include "vnic_cq.h" +#include "vnic_intr.h" +#include "vnic_stats.h" +#include "vnic_nic.h" +#include "fnic.h" + +int fnic_get_vnic_config(struct fnic *fnic) +{ + struct vnic_fc_config *c = &fnic->config; + int err; + +#define GET_CONFIG(m) \ + do { \ + err = vnic_dev_spec(fnic->vdev, \ + offsetof(struct vnic_fc_config, m), \ + sizeof(c->m), &c->m); \ + if (err) { \ + shost_printk(KERN_ERR, fnic->lport->host, \ + "Error getting %s, %d\n", #m, \ + err); \ + return err; \ + } \ + } while (0); + + GET_CONFIG(node_wwn); + GET_CONFIG(port_wwn); + GET_CONFIG(wq_enet_desc_count); + GET_CONFIG(wq_copy_desc_count); + GET_CONFIG(rq_desc_count); + GET_CONFIG(maxdatafieldsize); + GET_CONFIG(ed_tov); + GET_CONFIG(ra_tov); + GET_CONFIG(intr_timer); + GET_CONFIG(intr_timer_type); + GET_CONFIG(flags); + GET_CONFIG(flogi_retries); + GET_CONFIG(flogi_timeout); + GET_CONFIG(plogi_retries); + GET_CONFIG(plogi_timeout); + GET_CONFIG(io_throttle_count); + GET_CONFIG(link_down_timeout); + GET_CONFIG(port_down_timeout); + GET_CONFIG(port_down_io_retries); + GET_CONFIG(luns_per_tgt); + + c->wq_enet_desc_count = + min_t(u32, VNIC_FNIC_WQ_DESCS_MAX, + max_t(u32, VNIC_FNIC_WQ_DESCS_MIN, + c->wq_enet_desc_count)); + c->wq_enet_desc_count = ALIGN(c->wq_enet_desc_count, 16); + + c->wq_copy_desc_count = + min_t(u32, VNIC_FNIC_WQ_COPY_DESCS_MAX, + max_t(u32, VNIC_FNIC_WQ_COPY_DESCS_MIN, + c->wq_copy_desc_count)); + c->wq_copy_desc_count = ALIGN(c->wq_copy_desc_count, 16); + + c->rq_desc_count = + min_t(u32, VNIC_FNIC_RQ_DESCS_MAX, + max_t(u32, VNIC_FNIC_RQ_DESCS_MIN, + c->rq_desc_count)); + c->rq_desc_count = ALIGN(c->rq_desc_count, 16); + + c->maxdatafieldsize = + min_t(u16, VNIC_FNIC_MAXDATAFIELDSIZE_MAX, + max_t(u16, VNIC_FNIC_MAXDATAFIELDSIZE_MIN, + c->maxdatafieldsize)); + c->ed_tov = + min_t(u32, VNIC_FNIC_EDTOV_MAX, + max_t(u32, VNIC_FNIC_EDTOV_MIN, + c->ed_tov)); + + c->ra_tov = + min_t(u32, VNIC_FNIC_RATOV_MAX, + max_t(u32, VNIC_FNIC_RATOV_MIN, + c->ra_tov)); + + c->flogi_retries = + min_t(u32, VNIC_FNIC_FLOGI_RETRIES_MAX, c->flogi_retries); + + c->flogi_timeout = + min_t(u32, VNIC_FNIC_FLOGI_TIMEOUT_MAX, + max_t(u32, VNIC_FNIC_FLOGI_TIMEOUT_MIN, + c->flogi_timeout)); + + c->plogi_retries = + min_t(u32, VNIC_FNIC_PLOGI_RETRIES_MAX, c->plogi_retries); + + c->plogi_timeout = + min_t(u32, VNIC_FNIC_PLOGI_TIMEOUT_MAX, + max_t(u32, VNIC_FNIC_PLOGI_TIMEOUT_MIN, + c->plogi_timeout)); + + c->io_throttle_count = + min_t(u32, VNIC_FNIC_IO_THROTTLE_COUNT_MAX, + max_t(u32, VNIC_FNIC_IO_THROTTLE_COUNT_MIN, + c->io_throttle_count)); + + c->link_down_timeout = + min_t(u32, VNIC_FNIC_LINK_DOWN_TIMEOUT_MAX, + c->link_down_timeout); + + c->port_down_timeout = + min_t(u32, VNIC_FNIC_PORT_DOWN_TIMEOUT_MAX, + c->port_down_timeout); + + c->port_down_io_retries = + min_t(u32, VNIC_FNIC_PORT_DOWN_IO_RETRIES_MAX, + c->port_down_io_retries); + + c->luns_per_tgt = + min_t(u32, VNIC_FNIC_LUNS_PER_TARGET_MAX, + max_t(u32, VNIC_FNIC_LUNS_PER_TARGET_MIN, + c->luns_per_tgt)); + + c->intr_timer = min_t(u16, VNIC_INTR_TIMER_MAX, c->intr_timer); + c->intr_timer_type = c->intr_timer_type; + + shost_printk(KERN_INFO, fnic->lport->host, + "vNIC MAC addr %02x:%02x:%02x:%02x:%02x:%02x " + "wq/wq_copy/rq %d/%d/%d\n", + fnic->mac_addr[0], fnic->mac_addr[1], fnic->mac_addr[2], + fnic->mac_addr[3], fnic->mac_addr[4], fnic->mac_addr[5], + c->wq_enet_desc_count, c->wq_copy_desc_count, + c->rq_desc_count); + shost_printk(KERN_INFO, fnic->lport->host, + "vNIC node wwn %llx port wwn %llx\n", + c->node_wwn, c->port_wwn); + shost_printk(KERN_INFO, fnic->lport->host, + "vNIC ed_tov %d ra_tov %d\n", + c->ed_tov, c->ra_tov); + shost_printk(KERN_INFO, fnic->lport->host, + "vNIC mtu %d intr timer %d\n", + c->maxdatafieldsize, c->intr_timer); + shost_printk(KERN_INFO, fnic->lport->host, + "vNIC flags 0x%x luns per tgt %d\n", + c->flags, c->luns_per_tgt); + shost_printk(KERN_INFO, fnic->lport->host, + "vNIC flogi_retries %d flogi timeout %d\n", + c->flogi_retries, c->flogi_timeout); + shost_printk(KERN_INFO, fnic->lport->host, + "vNIC plogi retries %d plogi timeout %d\n", + c->plogi_retries, c->plogi_timeout); + shost_printk(KERN_INFO, fnic->lport->host, + "vNIC io throttle count %d link dn timeout %d\n", + c->io_throttle_count, c->link_down_timeout); + shost_printk(KERN_INFO, fnic->lport->host, + "vNIC port dn io retries %d port dn timeout %d\n", + c->port_down_io_retries, c->port_down_timeout); + + return 0; +} + +int fnic_set_nic_config(struct fnic *fnic, u8 rss_default_cpu, + u8 rss_hash_type, + u8 rss_hash_bits, u8 rss_base_cpu, u8 rss_enable, + u8 tso_ipid_split_en, u8 ig_vlan_strip_en) +{ + u64 a0, a1; + u32 nic_cfg; + int wait = 1000; + + vnic_set_nic_cfg(&nic_cfg, rss_default_cpu, + rss_hash_type, rss_hash_bits, rss_base_cpu, + rss_enable, tso_ipid_split_en, ig_vlan_strip_en); + + a0 = nic_cfg; + a1 = 0; + + return vnic_dev_cmd(fnic->vdev, CMD_NIC_CFG, &a0, &a1, wait); +} + +void fnic_get_res_counts(struct fnic *fnic) +{ + fnic->wq_count = vnic_dev_get_res_count(fnic->vdev, RES_TYPE_WQ); + fnic->raw_wq_count = fnic->wq_count - 1; + fnic->wq_copy_count = fnic->wq_count - fnic->raw_wq_count; + fnic->rq_count = vnic_dev_get_res_count(fnic->vdev, RES_TYPE_RQ); + fnic->cq_count = vnic_dev_get_res_count(fnic->vdev, RES_TYPE_CQ); + fnic->intr_count = vnic_dev_get_res_count(fnic->vdev, + RES_TYPE_INTR_CTRL); +} + +void fnic_free_vnic_resources(struct fnic *fnic) +{ + unsigned int i; + + for (i = 0; i < fnic->raw_wq_count; i++) + vnic_wq_free(&fnic->wq[i]); + + for (i = 0; i < fnic->wq_copy_count; i++) + vnic_wq_copy_free(&fnic->wq_copy[i]); + + for (i = 0; i < fnic->rq_count; i++) + vnic_rq_free(&fnic->rq[i]); + + for (i = 0; i < fnic->cq_count; i++) + vnic_cq_free(&fnic->cq[i]); + + for (i = 0; i < fnic->intr_count; i++) + vnic_intr_free(&fnic->intr[i]); +} + +int fnic_alloc_vnic_resources(struct fnic *fnic) +{ + enum vnic_dev_intr_mode intr_mode; + unsigned int mask_on_assertion; + unsigned int interrupt_offset; + unsigned int error_interrupt_enable; + unsigned int error_interrupt_offset; + unsigned int i, cq_index; + unsigned int wq_copy_cq_desc_count; + int err; + + intr_mode = vnic_dev_get_intr_mode(fnic->vdev); + + shost_printk(KERN_INFO, fnic->lport->host, "vNIC interrupt mode: %s\n", + intr_mode == VNIC_DEV_INTR_MODE_INTX ? "legacy PCI INTx" : + intr_mode == VNIC_DEV_INTR_MODE_MSI ? "MSI" : + intr_mode == VNIC_DEV_INTR_MODE_MSIX ? + "MSI-X" : "unknown"); + + shost_printk(KERN_INFO, fnic->lport->host, "vNIC resources avail: " + "wq %d cp_wq %d raw_wq %d rq %d cq %d intr %d\n", + fnic->wq_count, fnic->wq_copy_count, fnic->raw_wq_count, + fnic->rq_count, fnic->cq_count, fnic->intr_count); + + /* Allocate Raw WQ used for FCS frames */ + for (i = 0; i < fnic->raw_wq_count; i++) { + err = vnic_wq_alloc(fnic->vdev, &fnic->wq[i], i, + fnic->config.wq_enet_desc_count, + sizeof(struct wq_enet_desc)); + if (err) + goto err_out_cleanup; + } + + /* Allocate Copy WQs used for SCSI IOs */ + for (i = 0; i < fnic->wq_copy_count; i++) { + err = vnic_wq_copy_alloc(fnic->vdev, &fnic->wq_copy[i], + (fnic->raw_wq_count + i), + fnic->config.wq_copy_desc_count, + sizeof(struct fcpio_host_req)); + if (err) + goto err_out_cleanup; + } + + /* RQ for receiving FCS frames */ + for (i = 0; i < fnic->rq_count; i++) { + err = vnic_rq_alloc(fnic->vdev, &fnic->rq[i], i, + fnic->config.rq_desc_count, + sizeof(struct rq_enet_desc)); + if (err) + goto err_out_cleanup; + } + + /* CQ for each RQ */ + for (i = 0; i < fnic->rq_count; i++) { + cq_index = i; + err = vnic_cq_alloc(fnic->vdev, + &fnic->cq[cq_index], cq_index, + fnic->config.rq_desc_count, + sizeof(struct cq_enet_rq_desc)); + if (err) + goto err_out_cleanup; + } + + /* CQ for each WQ */ + for (i = 0; i < fnic->raw_wq_count; i++) { + cq_index = fnic->rq_count + i; + err = vnic_cq_alloc(fnic->vdev, &fnic->cq[cq_index], cq_index, + fnic->config.wq_enet_desc_count, + sizeof(struct cq_enet_wq_desc)); + if (err) + goto err_out_cleanup; + } + + /* CQ for each COPY WQ */ + wq_copy_cq_desc_count = (fnic->config.wq_copy_desc_count * 3); + for (i = 0; i < fnic->wq_copy_count; i++) { + cq_index = fnic->raw_wq_count + fnic->rq_count + i; + err = vnic_cq_alloc(fnic->vdev, &fnic->cq[cq_index], + cq_index, + wq_copy_cq_desc_count, + sizeof(struct fcpio_fw_req)); + if (err) + goto err_out_cleanup; + } + + for (i = 0; i < fnic->intr_count; i++) { + err = vnic_intr_alloc(fnic->vdev, &fnic->intr[i], i); + if (err) + goto err_out_cleanup; + } + + fnic->legacy_pba = vnic_dev_get_res(fnic->vdev, + RES_TYPE_INTR_PBA_LEGACY, 0); + + if (!fnic->legacy_pba && intr_mode == VNIC_DEV_INTR_MODE_INTX) { + shost_printk(KERN_ERR, fnic->lport->host, + "Failed to hook legacy pba resource\n"); + err = -ENODEV; + goto err_out_cleanup; + } + + /* + * Init RQ/WQ resources. + * + * RQ[0 to n-1] point to CQ[0 to n-1] + * WQ[0 to m-1] point to CQ[n to n+m-1] + * WQ_COPY[0 to k-1] points to CQ[n+m to n+m+k-1] + * + * Note for copy wq we always initialize with cq_index = 0 + * + * Error interrupt is not enabled for MSI. + */ + + switch (intr_mode) { + case VNIC_DEV_INTR_MODE_INTX: + case VNIC_DEV_INTR_MODE_MSIX: + error_interrupt_enable = 1; + error_interrupt_offset = fnic->err_intr_offset; + break; + default: + error_interrupt_enable = 0; + error_interrupt_offset = 0; + break; + } + + for (i = 0; i < fnic->rq_count; i++) { + cq_index = i; + vnic_rq_init(&fnic->rq[i], + cq_index, + error_interrupt_enable, + error_interrupt_offset); + } + + for (i = 0; i < fnic->raw_wq_count; i++) { + cq_index = i + fnic->rq_count; + vnic_wq_init(&fnic->wq[i], + cq_index, + error_interrupt_enable, + error_interrupt_offset); + } + + for (i = 0; i < fnic->wq_copy_count; i++) { + vnic_wq_copy_init(&fnic->wq_copy[i], + 0 /* cq_index 0 - always */, + error_interrupt_enable, + error_interrupt_offset); + } + + for (i = 0; i < fnic->cq_count; i++) { + + switch (intr_mode) { + case VNIC_DEV_INTR_MODE_MSIX: + interrupt_offset = i; + break; + default: + interrupt_offset = 0; + break; + } + + vnic_cq_init(&fnic->cq[i], + 0 /* flow_control_enable */, + 1 /* color_enable */, + 0 /* cq_head */, + 0 /* cq_tail */, + 1 /* cq_tail_color */, + 1 /* interrupt_enable */, + 1 /* cq_entry_enable */, + 0 /* cq_message_enable */, + interrupt_offset, + 0 /* cq_message_addr */); + } + + /* + * Init INTR resources + * + * mask_on_assertion is not used for INTx due to the level- + * triggered nature of INTx + */ + + switch (intr_mode) { + case VNIC_DEV_INTR_MODE_MSI: + case VNIC_DEV_INTR_MODE_MSIX: + mask_on_assertion = 1; + break; + default: + mask_on_assertion = 0; + break; + } + + for (i = 0; i < fnic->intr_count; i++) { + vnic_intr_init(&fnic->intr[i], + fnic->config.intr_timer, + fnic->config.intr_timer_type, + mask_on_assertion); + } + + /* init the stats memory by making the first call here */ + err = vnic_dev_stats_dump(fnic->vdev, &fnic->stats); + if (err) { + shost_printk(KERN_ERR, fnic->lport->host, + "vnic_dev_stats_dump failed - x%x\n", err); + goto err_out_cleanup; + } + + /* Clear LIF stats */ + vnic_dev_stats_clear(fnic->vdev); + + return 0; + +err_out_cleanup: + fnic_free_vnic_resources(fnic); + + return err; +} diff --git a/drivers/scsi/fnic/fnic_res.h b/drivers/scsi/fnic/fnic_res.h new file mode 100644 index 00000000000..b6f31026253 --- /dev/null +++ b/drivers/scsi/fnic/fnic_res.h @@ -0,0 +1,197 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef _FNIC_RES_H_ +#define _FNIC_RES_H_ + +#include "wq_enet_desc.h" +#include "rq_enet_desc.h" +#include "vnic_wq.h" +#include "vnic_rq.h" +#include "fnic_io.h" +#include "fcpio.h" +#include "vnic_wq_copy.h" +#include "vnic_cq_copy.h" + +static inline void fnic_queue_wq_desc(struct vnic_wq *wq, + void *os_buf, dma_addr_t dma_addr, + unsigned int len, unsigned int fc_eof, + int vlan_tag_insert, + unsigned int vlan_tag, + int cq_entry, int sop, int eop) +{ + struct wq_enet_desc *desc = vnic_wq_next_desc(wq); + + wq_enet_desc_enc(desc, + (u64)dma_addr | VNIC_PADDR_TARGET, + (u16)len, + 0, /* mss_or_csum_offset */ + (u16)fc_eof, + 0, /* offload_mode */ + (u8)eop, (u8)cq_entry, + 1, /* fcoe_encap */ + (u8)vlan_tag_insert, + (u16)vlan_tag, + 0 /* loopback */); + + vnic_wq_post(wq, os_buf, dma_addr, len, sop, eop); +} + +static inline void fnic_queue_wq_copy_desc_icmnd_16(struct vnic_wq_copy *wq, + u32 req_id, + u32 lunmap_id, u8 spl_flags, + u32 sgl_cnt, u32 sense_len, + u64 sgl_addr, u64 sns_addr, + u8 crn, u8 pri_ta, + u8 flags, u8 *scsi_cdb, + u32 data_len, u8 *lun, + u32 d_id, u16 mss, + u32 ratov, u32 edtov) +{ + struct fcpio_host_req *desc = vnic_wq_copy_next_desc(wq); + + desc->hdr.type = FCPIO_ICMND_16; /* enum fcpio_type */ + desc->hdr.status = 0; /* header status entry */ + desc->hdr._resvd = 0; /* reserved */ + desc->hdr.tag.u.req_id = req_id; /* id for this request */ + + desc->u.icmnd_16.lunmap_id = lunmap_id; /* index into lunmap table */ + desc->u.icmnd_16.special_req_flags = spl_flags; /* exch req flags */ + desc->u.icmnd_16._resvd0[0] = 0; /* reserved */ + desc->u.icmnd_16._resvd0[1] = 0; /* reserved */ + desc->u.icmnd_16._resvd0[2] = 0; /* reserved */ + desc->u.icmnd_16.sgl_cnt = sgl_cnt; /* scatter-gather list count */ + desc->u.icmnd_16.sense_len = sense_len; /* sense buffer length */ + desc->u.icmnd_16.sgl_addr = sgl_addr; /* scatter-gather list addr */ + desc->u.icmnd_16.sense_addr = sns_addr; /* sense buffer address */ + desc->u.icmnd_16.crn = crn; /* SCSI Command Reference No.*/ + desc->u.icmnd_16.pri_ta = pri_ta; /* SCSI Pri & Task attribute */ + desc->u.icmnd_16._resvd1 = 0; /* reserved: should be 0 */ + desc->u.icmnd_16.flags = flags; /* command flags */ + memcpy(desc->u.icmnd_16.scsi_cdb, scsi_cdb, CDB_16); /* SCSI CDB */ + desc->u.icmnd_16.data_len = data_len; /* length of data expected */ + memcpy(desc->u.icmnd_16.lun, lun, LUN_ADDRESS); /* LUN address */ + desc->u.icmnd_16._resvd2 = 0; /* reserved */ + hton24(desc->u.icmnd_16.d_id, d_id); /* FC vNIC only: Target D_ID */ + desc->u.icmnd_16.mss = mss; /* FC vNIC only: max burst */ + desc->u.icmnd_16.r_a_tov = ratov; /*FC vNIC only: Res. Alloc Timeout */ + desc->u.icmnd_16.e_d_tov = edtov; /*FC vNIC only: Err Detect Timeout */ + + vnic_wq_copy_post(wq); +} + +static inline void fnic_queue_wq_copy_desc_itmf(struct vnic_wq_copy *wq, + u32 req_id, u32 lunmap_id, + u32 tm_req, u32 tm_id, u8 *lun, + u32 d_id, u32 r_a_tov, + u32 e_d_tov) +{ + struct fcpio_host_req *desc = vnic_wq_copy_next_desc(wq); + + desc->hdr.type = FCPIO_ITMF; /* enum fcpio_type */ + desc->hdr.status = 0; /* header status entry */ + desc->hdr._resvd = 0; /* reserved */ + desc->hdr.tag.u.req_id = req_id; /* id for this request */ + + desc->u.itmf.lunmap_id = lunmap_id; /* index into lunmap table */ + desc->u.itmf.tm_req = tm_req; /* SCSI Task Management request */ + desc->u.itmf.t_tag = tm_id; /* tag of fcpio to be aborted */ + desc->u.itmf._resvd = 0; + memcpy(desc->u.itmf.lun, lun, LUN_ADDRESS); /* LUN address */ + desc->u.itmf._resvd1 = 0; + hton24(desc->u.itmf.d_id, d_id); /* FC vNIC only: Target D_ID */ + desc->u.itmf.r_a_tov = r_a_tov; /* FC vNIC only: R_A_TOV in msec */ + desc->u.itmf.e_d_tov = e_d_tov; /* FC vNIC only: E_D_TOV in msec */ + + vnic_wq_copy_post(wq); +} + +static inline void fnic_queue_wq_copy_desc_flogi_reg(struct vnic_wq_copy *wq, + u32 req_id, u8 format, + u32 s_id, u8 *gw_mac) +{ + struct fcpio_host_req *desc = vnic_wq_copy_next_desc(wq); + + desc->hdr.type = FCPIO_FLOGI_REG; /* enum fcpio_type */ + desc->hdr.status = 0; /* header status entry */ + desc->hdr._resvd = 0; /* reserved */ + desc->hdr.tag.u.req_id = req_id; /* id for this request */ + + desc->u.flogi_reg.format = format; + hton24(desc->u.flogi_reg.s_id, s_id); + memcpy(desc->u.flogi_reg.gateway_mac, gw_mac, ETH_ALEN); + + vnic_wq_copy_post(wq); +} + +static inline void fnic_queue_wq_copy_desc_fw_reset(struct vnic_wq_copy *wq, + u32 req_id) +{ + struct fcpio_host_req *desc = vnic_wq_copy_next_desc(wq); + + desc->hdr.type = FCPIO_RESET; /* enum fcpio_type */ + desc->hdr.status = 0; /* header status entry */ + desc->hdr._resvd = 0; /* reserved */ + desc->hdr.tag.u.req_id = req_id; /* id for this request */ + + vnic_wq_copy_post(wq); +} + +static inline void fnic_queue_wq_copy_desc_lunmap(struct vnic_wq_copy *wq, + u32 req_id, u64 lunmap_addr, + u32 lunmap_len) +{ + struct fcpio_host_req *desc = vnic_wq_copy_next_desc(wq); + + desc->hdr.type = FCPIO_LUNMAP_REQ; /* enum fcpio_type */ + desc->hdr.status = 0; /* header status entry */ + desc->hdr._resvd = 0; /* reserved */ + desc->hdr.tag.u.req_id = req_id; /* id for this request */ + + desc->u.lunmap_req.addr = lunmap_addr; /* address of the buffer */ + desc->u.lunmap_req.len = lunmap_len; /* len of the buffer */ + + vnic_wq_copy_post(wq); +} + +static inline void fnic_queue_rq_desc(struct vnic_rq *rq, + void *os_buf, dma_addr_t dma_addr, + u16 len) +{ + struct rq_enet_desc *desc = vnic_rq_next_desc(rq); + + rq_enet_desc_enc(desc, + (u64)dma_addr | VNIC_PADDR_TARGET, + RQ_ENET_TYPE_ONLY_SOP, + (u16)len); + + vnic_rq_post(rq, os_buf, 0, dma_addr, len); +} + + +struct fnic; + +int fnic_get_vnic_config(struct fnic *); +int fnic_alloc_vnic_resources(struct fnic *); +void fnic_free_vnic_resources(struct fnic *); +void fnic_get_res_counts(struct fnic *); +int fnic_set_nic_config(struct fnic *fnic, u8 rss_default_cpu, + u8 rss_hash_type, u8 rss_hash_bits, u8 rss_base_cpu, + u8 rss_enable, u8 tso_ipid_split_en, + u8 ig_vlan_strip_en); + +#endif /* _FNIC_RES_H_ */ diff --git a/drivers/scsi/fnic/fnic_scsi.c b/drivers/scsi/fnic/fnic_scsi.c new file mode 100644 index 00000000000..eabf3650285 --- /dev/null +++ b/drivers/scsi/fnic/fnic_scsi.c @@ -0,0 +1,1850 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "fnic_io.h" +#include "fnic.h" + +const char *fnic_state_str[] = { + [FNIC_IN_FC_MODE] = "FNIC_IN_FC_MODE", + [FNIC_IN_FC_TRANS_ETH_MODE] = "FNIC_IN_FC_TRANS_ETH_MODE", + [FNIC_IN_ETH_MODE] = "FNIC_IN_ETH_MODE", + [FNIC_IN_ETH_TRANS_FC_MODE] = "FNIC_IN_ETH_TRANS_FC_MODE", +}; + +static const char *fnic_ioreq_state_str[] = { + [FNIC_IOREQ_CMD_PENDING] = "FNIC_IOREQ_CMD_PENDING", + [FNIC_IOREQ_ABTS_PENDING] = "FNIC_IOREQ_ABTS_PENDING", + [FNIC_IOREQ_ABTS_COMPLETE] = "FNIC_IOREQ_ABTS_COMPLETE", + [FNIC_IOREQ_CMD_COMPLETE] = "FNIC_IOREQ_CMD_COMPLETE", +}; + +static const char *fcpio_status_str[] = { + [FCPIO_SUCCESS] = "FCPIO_SUCCESS", /*0x0*/ + [FCPIO_INVALID_HEADER] = "FCPIO_INVALID_HEADER", + [FCPIO_OUT_OF_RESOURCE] = "FCPIO_OUT_OF_RESOURCE", + [FCPIO_INVALID_PARAM] = "FCPIO_INVALID_PARAM]", + [FCPIO_REQ_NOT_SUPPORTED] = "FCPIO_REQ_NOT_SUPPORTED", + [FCPIO_IO_NOT_FOUND] = "FCPIO_IO_NOT_FOUND", + [FCPIO_ABORTED] = "FCPIO_ABORTED", /*0x41*/ + [FCPIO_TIMEOUT] = "FCPIO_TIMEOUT", + [FCPIO_SGL_INVALID] = "FCPIO_SGL_INVALID", + [FCPIO_MSS_INVALID] = "FCPIO_MSS_INVALID", + [FCPIO_DATA_CNT_MISMATCH] = "FCPIO_DATA_CNT_MISMATCH", + [FCPIO_FW_ERR] = "FCPIO_FW_ERR", + [FCPIO_ITMF_REJECTED] = "FCPIO_ITMF_REJECTED", + [FCPIO_ITMF_FAILED] = "FCPIO_ITMF_FAILED", + [FCPIO_ITMF_INCORRECT_LUN] = "FCPIO_ITMF_INCORRECT_LUN", + [FCPIO_CMND_REJECTED] = "FCPIO_CMND_REJECTED", + [FCPIO_NO_PATH_AVAIL] = "FCPIO_NO_PATH_AVAIL", + [FCPIO_PATH_FAILED] = "FCPIO_PATH_FAILED", + [FCPIO_LUNMAP_CHNG_PEND] = "FCPIO_LUNHMAP_CHNG_PEND", +}; + +const char *fnic_state_to_str(unsigned int state) +{ + if (state >= ARRAY_SIZE(fnic_state_str) || !fnic_state_str[state]) + return "unknown"; + + return fnic_state_str[state]; +} + +static const char *fnic_ioreq_state_to_str(unsigned int state) +{ + if (state >= ARRAY_SIZE(fnic_ioreq_state_str) || + !fnic_ioreq_state_str[state]) + return "unknown"; + + return fnic_ioreq_state_str[state]; +} + +static const char *fnic_fcpio_status_to_str(unsigned int status) +{ + if (status >= ARRAY_SIZE(fcpio_status_str) || !fcpio_status_str[status]) + return "unknown"; + + return fcpio_status_str[status]; +} + +static void fnic_cleanup_io(struct fnic *fnic, int exclude_id); + +static inline spinlock_t *fnic_io_lock_hash(struct fnic *fnic, + struct scsi_cmnd *sc) +{ + u32 hash = sc->request->tag & (FNIC_IO_LOCKS - 1); + + return &fnic->io_req_lock[hash]; +} + +/* + * Unmap the data buffer and sense buffer for an io_req, + * also unmap and free the device-private scatter/gather list. + */ +static void fnic_release_ioreq_buf(struct fnic *fnic, + struct fnic_io_req *io_req, + struct scsi_cmnd *sc) +{ + if (io_req->sgl_list_pa) + pci_unmap_single(fnic->pdev, io_req->sgl_list_pa, + sizeof(io_req->sgl_list[0]) * io_req->sgl_cnt, + PCI_DMA_TODEVICE); + scsi_dma_unmap(sc); + + if (io_req->sgl_cnt) + mempool_free(io_req->sgl_list_alloc, + fnic->io_sgl_pool[io_req->sgl_type]); + if (io_req->sense_buf_pa) + pci_unmap_single(fnic->pdev, io_req->sense_buf_pa, + SCSI_SENSE_BUFFERSIZE, PCI_DMA_FROMDEVICE); +} + +/* Free up Copy Wq descriptors. Called with copy_wq lock held */ +static int free_wq_copy_descs(struct fnic *fnic, struct vnic_wq_copy *wq) +{ + /* if no Ack received from firmware, then nothing to clean */ + if (!fnic->fw_ack_recd[0]) + return 1; + + /* + * Update desc_available count based on number of freed descriptors + * Account for wraparound + */ + if (wq->to_clean_index <= fnic->fw_ack_index[0]) + wq->ring.desc_avail += (fnic->fw_ack_index[0] + - wq->to_clean_index + 1); + else + wq->ring.desc_avail += (wq->ring.desc_count + - wq->to_clean_index + + fnic->fw_ack_index[0] + 1); + + /* + * just bump clean index to ack_index+1 accounting for wraparound + * this will essentially free up all descriptors between + * to_clean_index and fw_ack_index, both inclusive + */ + wq->to_clean_index = + (fnic->fw_ack_index[0] + 1) % wq->ring.desc_count; + + /* we have processed the acks received so far */ + fnic->fw_ack_recd[0] = 0; + return 0; +} + + +/* + * fnic_fw_reset_handler + * Routine to send reset msg to fw + */ +int fnic_fw_reset_handler(struct fnic *fnic) +{ + struct vnic_wq_copy *wq = &fnic->wq_copy[0]; + int ret = 0; + unsigned long flags; + + spin_lock_irqsave(&fnic->wq_copy_lock[0], flags); + + if (vnic_wq_copy_desc_avail(wq) <= fnic->wq_copy_desc_low[0]) + free_wq_copy_descs(fnic, wq); + + if (!vnic_wq_copy_desc_avail(wq)) + ret = -EAGAIN; + else + fnic_queue_wq_copy_desc_fw_reset(wq, SCSI_NO_TAG); + + spin_unlock_irqrestore(&fnic->wq_copy_lock[0], flags); + + if (!ret) + FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, + "Issued fw reset\n"); + else + FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, + "Failed to issue fw reset\n"); + return ret; +} + + +/* + * fnic_flogi_reg_handler + * Routine to send flogi register msg to fw + */ +int fnic_flogi_reg_handler(struct fnic *fnic) +{ + struct vnic_wq_copy *wq = &fnic->wq_copy[0]; + u8 gw_mac[ETH_ALEN]; + int ret = 0; + unsigned long flags; + + spin_lock_irqsave(&fnic->wq_copy_lock[0], flags); + + if (vnic_wq_copy_desc_avail(wq) <= fnic->wq_copy_desc_low[0]) + free_wq_copy_descs(fnic, wq); + + if (!vnic_wq_copy_desc_avail(wq)) { + ret = -EAGAIN; + goto flogi_reg_ioreq_end; + } + + if (fnic->fcoui_mode) + memset(gw_mac, 0xff, ETH_ALEN); + else + memcpy(gw_mac, fnic->dest_addr, ETH_ALEN); + + fnic_queue_wq_copy_desc_flogi_reg(wq, SCSI_NO_TAG, + FCPIO_FLOGI_REG_GW_DEST, + fnic->s_id, + gw_mac); + +flogi_reg_ioreq_end: + spin_unlock_irqrestore(&fnic->wq_copy_lock[0], flags); + + if (!ret) + FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, + "flog reg issued\n"); + + return ret; +} + +/* + * fnic_queue_wq_copy_desc + * Routine to enqueue a wq copy desc + */ +static inline int fnic_queue_wq_copy_desc(struct fnic *fnic, + struct vnic_wq_copy *wq, + struct fnic_io_req *io_req, + struct scsi_cmnd *sc, + u32 sg_count) +{ + struct scatterlist *sg; + struct fc_rport *rport = starget_to_rport(scsi_target(sc->device)); + struct fc_rport_libfc_priv *rp = rport->dd_data; + struct host_sg_desc *desc; + u8 pri_tag = 0; + unsigned int i; + unsigned long intr_flags; + int flags; + u8 exch_flags; + struct scsi_lun fc_lun; + char msg[2]; + + if (sg_count) { + BUG_ON(sg_count < 0); + BUG_ON(sg_count > FNIC_MAX_SG_DESC_CNT); + + /* For each SGE, create a device desc entry */ + desc = io_req->sgl_list; + for_each_sg(scsi_sglist(sc), sg, sg_count, i) { + desc->addr = cpu_to_le64(sg_dma_address(sg)); + desc->len = cpu_to_le32(sg_dma_len(sg)); + desc->_resvd = 0; + desc++; + } + + io_req->sgl_list_pa = pci_map_single + (fnic->pdev, + io_req->sgl_list, + sizeof(io_req->sgl_list[0]) * sg_count, + PCI_DMA_TODEVICE); + } + + io_req->sense_buf_pa = pci_map_single(fnic->pdev, + sc->sense_buffer, + SCSI_SENSE_BUFFERSIZE, + PCI_DMA_FROMDEVICE); + + int_to_scsilun(sc->device->lun, &fc_lun); + + pri_tag = FCPIO_ICMND_PTA_SIMPLE; + msg[0] = MSG_SIMPLE_TAG; + scsi_populate_tag_msg(sc, msg); + if (msg[0] == MSG_ORDERED_TAG) + pri_tag = FCPIO_ICMND_PTA_ORDERED; + + /* Enqueue the descriptor in the Copy WQ */ + spin_lock_irqsave(&fnic->wq_copy_lock[0], intr_flags); + + if (vnic_wq_copy_desc_avail(wq) <= fnic->wq_copy_desc_low[0]) + free_wq_copy_descs(fnic, wq); + + if (unlikely(!vnic_wq_copy_desc_avail(wq))) { + spin_unlock_irqrestore(&fnic->wq_copy_lock[0], intr_flags); + return SCSI_MLQUEUE_HOST_BUSY; + } + + flags = 0; + if (sc->sc_data_direction == DMA_FROM_DEVICE) + flags = FCPIO_ICMND_RDDATA; + else if (sc->sc_data_direction == DMA_TO_DEVICE) + flags = FCPIO_ICMND_WRDATA; + + exch_flags = 0; + if ((fnic->config.flags & VFCF_FCP_SEQ_LVL_ERR) && + (rp->flags & FC_RP_FLAGS_RETRY)) + exch_flags |= FCPIO_ICMND_SRFLAG_RETRY; + + fnic_queue_wq_copy_desc_icmnd_16(wq, sc->request->tag, + 0, exch_flags, io_req->sgl_cnt, + SCSI_SENSE_BUFFERSIZE, + io_req->sgl_list_pa, + io_req->sense_buf_pa, + 0, /* scsi cmd ref, always 0 */ + pri_tag, /* scsi pri and tag */ + flags, /* command flags */ + sc->cmnd, scsi_bufflen(sc), + fc_lun.scsi_lun, io_req->port_id, + rport->maxframe_size, rp->r_a_tov, + rp->e_d_tov); + + spin_unlock_irqrestore(&fnic->wq_copy_lock[0], intr_flags); + return 0; +} + +/* + * fnic_queuecommand + * Routine to send a scsi cdb + * Called with host_lock held and interrupts disabled. + */ +int fnic_queuecommand(struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *)) +{ + struct fc_lport *lp; + struct fc_rport *rport; + struct fnic_io_req *io_req; + struct fnic *fnic; + struct vnic_wq_copy *wq; + int ret; + u32 sg_count; + unsigned long flags; + unsigned long ptr; + + rport = starget_to_rport(scsi_target(sc->device)); + ret = fc_remote_port_chkready(rport); + if (ret) { + sc->result = ret; + done(sc); + return 0; + } + + lp = shost_priv(sc->device->host); + if (lp->state != LPORT_ST_READY || !(lp->link_up)) + return SCSI_MLQUEUE_HOST_BUSY; + + /* + * Release host lock, use driver resource specific locks from here. + * Don't re-enable interrupts in case they were disabled prior to the + * caller disabling them. + */ + spin_unlock(lp->host->host_lock); + + /* Get a new io_req for this SCSI IO */ + fnic = lport_priv(lp); + + io_req = mempool_alloc(fnic->io_req_pool, GFP_ATOMIC); + if (!io_req) { + ret = SCSI_MLQUEUE_HOST_BUSY; + goto out; + } + memset(io_req, 0, sizeof(*io_req)); + + /* Map the data buffer */ + sg_count = scsi_dma_map(sc); + if (sg_count < 0) { + mempool_free(io_req, fnic->io_req_pool); + goto out; + } + + /* Determine the type of scatter/gather list we need */ + io_req->sgl_cnt = sg_count; + io_req->sgl_type = FNIC_SGL_CACHE_DFLT; + if (sg_count > FNIC_DFLT_SG_DESC_CNT) + io_req->sgl_type = FNIC_SGL_CACHE_MAX; + + if (sg_count) { + io_req->sgl_list = + mempool_alloc(fnic->io_sgl_pool[io_req->sgl_type], + GFP_ATOMIC | GFP_DMA); + if (!io_req->sgl_list) { + ret = SCSI_MLQUEUE_HOST_BUSY; + scsi_dma_unmap(sc); + mempool_free(io_req, fnic->io_req_pool); + goto out; + } + + /* Cache sgl list allocated address before alignment */ + io_req->sgl_list_alloc = io_req->sgl_list; + ptr = (unsigned long) io_req->sgl_list; + if (ptr % FNIC_SG_DESC_ALIGN) { + io_req->sgl_list = (struct host_sg_desc *) + (((unsigned long) ptr + + FNIC_SG_DESC_ALIGN - 1) + & ~(FNIC_SG_DESC_ALIGN - 1)); + } + } + + /* initialize rest of io_req */ + io_req->port_id = rport->port_id; + CMD_STATE(sc) = FNIC_IOREQ_CMD_PENDING; + CMD_SP(sc) = (char *)io_req; + sc->scsi_done = done; + + /* create copy wq desc and enqueue it */ + wq = &fnic->wq_copy[0]; + ret = fnic_queue_wq_copy_desc(fnic, wq, io_req, sc, sg_count); + if (ret) { + /* + * In case another thread cancelled the request, + * refetch the pointer under the lock. + */ + spinlock_t *io_lock = fnic_io_lock_hash(fnic, sc); + + spin_lock_irqsave(io_lock, flags); + io_req = (struct fnic_io_req *)CMD_SP(sc); + CMD_SP(sc) = NULL; + CMD_STATE(sc) = FNIC_IOREQ_CMD_COMPLETE; + spin_unlock_irqrestore(io_lock, flags); + if (io_req) { + fnic_release_ioreq_buf(fnic, io_req, sc); + mempool_free(io_req, fnic->io_req_pool); + } + } +out: + /* acquire host lock before returning to SCSI */ + spin_lock(lp->host->host_lock); + return ret; +} + +/* + * fnic_fcpio_fw_reset_cmpl_handler + * Routine to handle fw reset completion + */ +static int fnic_fcpio_fw_reset_cmpl_handler(struct fnic *fnic, + struct fcpio_fw_req *desc) +{ + u8 type; + u8 hdr_status; + struct fcpio_tag tag; + int ret = 0; + struct fc_frame *flogi; + unsigned long flags; + + fcpio_header_dec(&desc->hdr, &type, &hdr_status, &tag); + + /* Clean up all outstanding io requests */ + fnic_cleanup_io(fnic, SCSI_NO_TAG); + + spin_lock_irqsave(&fnic->fnic_lock, flags); + + flogi = fnic->flogi; + fnic->flogi = NULL; + + /* fnic should be in FC_TRANS_ETH_MODE */ + if (fnic->state == FNIC_IN_FC_TRANS_ETH_MODE) { + /* Check status of reset completion */ + if (!hdr_status) { + FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, + "reset cmpl success\n"); + /* Ready to send flogi out */ + fnic->state = FNIC_IN_ETH_MODE; + } else { + FNIC_SCSI_DBG(KERN_DEBUG, + fnic->lport->host, + "fnic fw_reset : failed %s\n", + fnic_fcpio_status_to_str(hdr_status)); + + /* + * Unable to change to eth mode, cannot send out flogi + * Change state to fc mode, so that subsequent Flogi + * requests from libFC will cause more attempts to + * reset the firmware. Free the cached flogi + */ + fnic->state = FNIC_IN_FC_MODE; + ret = -1; + } + } else { + FNIC_SCSI_DBG(KERN_DEBUG, + fnic->lport->host, + "Unexpected state %s while processing" + " reset cmpl\n", fnic_state_to_str(fnic->state)); + ret = -1; + } + + /* Thread removing device blocks till firmware reset is complete */ + if (fnic->remove_wait) + complete(fnic->remove_wait); + + /* + * If fnic is being removed, or fw reset failed + * free the flogi frame. Else, send it out + */ + if (fnic->remove_wait || ret) { + fnic->flogi_oxid = FC_XID_UNKNOWN; + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + if (flogi) + dev_kfree_skb_irq(fp_skb(flogi)); + goto reset_cmpl_handler_end; + } + + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + + if (flogi) + ret = fnic_send_frame(fnic, flogi); + + reset_cmpl_handler_end: + return ret; +} + +/* + * fnic_fcpio_flogi_reg_cmpl_handler + * Routine to handle flogi register completion + */ +static int fnic_fcpio_flogi_reg_cmpl_handler(struct fnic *fnic, + struct fcpio_fw_req *desc) +{ + u8 type; + u8 hdr_status; + struct fcpio_tag tag; + int ret = 0; + struct fc_frame *flogi_resp = NULL; + unsigned long flags; + struct sk_buff *skb; + + fcpio_header_dec(&desc->hdr, &type, &hdr_status, &tag); + + /* Update fnic state based on status of flogi reg completion */ + spin_lock_irqsave(&fnic->fnic_lock, flags); + + flogi_resp = fnic->flogi_resp; + fnic->flogi_resp = NULL; + + if (fnic->state == FNIC_IN_ETH_TRANS_FC_MODE) { + + /* Check flogi registration completion status */ + if (!hdr_status) { + FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, + "flog reg succeeded\n"); + fnic->state = FNIC_IN_FC_MODE; + } else { + FNIC_SCSI_DBG(KERN_DEBUG, + fnic->lport->host, + "fnic flogi reg :failed %s\n", + fnic_fcpio_status_to_str(hdr_status)); + fnic->state = FNIC_IN_ETH_MODE; + ret = -1; + } + } else { + FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, + "Unexpected fnic state %s while" + " processing flogi reg completion\n", + fnic_state_to_str(fnic->state)); + ret = -1; + } + + /* Successful flogi reg cmpl, pass frame to LibFC */ + if (!ret && flogi_resp) { + if (fnic->stop_rx_link_events) { + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + goto reg_cmpl_handler_end; + } + skb = (struct sk_buff *)flogi_resp; + /* Use fr_flags to indicate whether flogi resp or not */ + fr_flags(flogi_resp) = 1; + fr_dev(flogi_resp) = fnic->lport; + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + + skb_queue_tail(&fnic->frame_queue, skb); + queue_work(fnic_event_queue, &fnic->frame_work); + + } else { + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + if (flogi_resp) + dev_kfree_skb_irq(fp_skb(flogi_resp)); + } + +reg_cmpl_handler_end: + return ret; +} + +static inline int is_ack_index_in_range(struct vnic_wq_copy *wq, + u16 request_out) +{ + if (wq->to_clean_index <= wq->to_use_index) { + /* out of range, stale request_out index */ + if (request_out < wq->to_clean_index || + request_out >= wq->to_use_index) + return 0; + } else { + /* out of range, stale request_out index */ + if (request_out < wq->to_clean_index && + request_out >= wq->to_use_index) + return 0; + } + /* request_out index is in range */ + return 1; +} + + +/* + * Mark that ack received and store the Ack index. If there are multiple + * acks received before Tx thread cleans it up, the latest value will be + * used which is correct behavior. This state should be in the copy Wq + * instead of in the fnic + */ +static inline void fnic_fcpio_ack_handler(struct fnic *fnic, + unsigned int cq_index, + struct fcpio_fw_req *desc) +{ + struct vnic_wq_copy *wq; + u16 request_out = desc->u.ack.request_out; + unsigned long flags; + + /* mark the ack state */ + wq = &fnic->wq_copy[cq_index - fnic->raw_wq_count - fnic->rq_count]; + spin_lock_irqsave(&fnic->wq_copy_lock[0], flags); + + if (is_ack_index_in_range(wq, request_out)) { + fnic->fw_ack_index[0] = request_out; + fnic->fw_ack_recd[0] = 1; + } + spin_unlock_irqrestore(&fnic->wq_copy_lock[0], flags); +} + +/* + * fnic_fcpio_icmnd_cmpl_handler + * Routine to handle icmnd completions + */ +static void fnic_fcpio_icmnd_cmpl_handler(struct fnic *fnic, + struct fcpio_fw_req *desc) +{ + u8 type; + u8 hdr_status; + struct fcpio_tag tag; + u32 id; + u64 xfer_len = 0; + struct fcpio_icmnd_cmpl *icmnd_cmpl; + struct fnic_io_req *io_req; + struct scsi_cmnd *sc; + unsigned long flags; + spinlock_t *io_lock; + + /* Decode the cmpl description to get the io_req id */ + fcpio_header_dec(&desc->hdr, &type, &hdr_status, &tag); + fcpio_tag_id_dec(&tag, &id); + + if (id >= FNIC_MAX_IO_REQ) + return; + + sc = scsi_host_find_tag(fnic->lport->host, id); + WARN_ON_ONCE(!sc); + if (!sc) + return; + + io_lock = fnic_io_lock_hash(fnic, sc); + spin_lock_irqsave(io_lock, flags); + io_req = (struct fnic_io_req *)CMD_SP(sc); + WARN_ON_ONCE(!io_req); + if (!io_req) { + spin_unlock_irqrestore(io_lock, flags); + return; + } + + /* firmware completed the io */ + io_req->io_completed = 1; + + /* + * if SCSI-ML has already issued abort on this command, + * ignore completion of the IO. The abts path will clean it up + */ + if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING) { + spin_unlock_irqrestore(io_lock, flags); + return; + } + + /* Mark the IO as complete */ + CMD_STATE(sc) = FNIC_IOREQ_CMD_COMPLETE; + + icmnd_cmpl = &desc->u.icmnd_cmpl; + + switch (hdr_status) { + case FCPIO_SUCCESS: + sc->result = (DID_OK << 16) | icmnd_cmpl->scsi_status; + xfer_len = scsi_bufflen(sc); + scsi_set_resid(sc, icmnd_cmpl->residual); + + if (icmnd_cmpl->flags & FCPIO_ICMND_CMPL_RESID_UNDER) + xfer_len -= icmnd_cmpl->residual; + + /* + * If queue_full, then try to reduce queue depth for all + * LUNS on the target. Todo: this should be accompanied + * by a periodic queue_depth rampup based on successful + * IO completion. + */ + if (icmnd_cmpl->scsi_status == QUEUE_FULL) { + struct scsi_device *t_sdev; + int qd = 0; + + shost_for_each_device(t_sdev, sc->device->host) { + if (t_sdev->id != sc->device->id) + continue; + + if (t_sdev->queue_depth > 1) { + qd = scsi_track_queue_full + (t_sdev, + t_sdev->queue_depth - 1); + if (qd == -1) + qd = t_sdev->host->cmd_per_lun; + shost_printk(KERN_INFO, + fnic->lport->host, + "scsi[%d:%d:%d:%d" + "] queue full detected," + "new depth = %d\n", + t_sdev->host->host_no, + t_sdev->channel, + t_sdev->id, t_sdev->lun, + t_sdev->queue_depth); + } + } + } + break; + + case FCPIO_TIMEOUT: /* request was timed out */ + sc->result = (DID_TIME_OUT << 16) | icmnd_cmpl->scsi_status; + break; + + case FCPIO_ABORTED: /* request was aborted */ + sc->result = (DID_ERROR << 16) | icmnd_cmpl->scsi_status; + break; + + case FCPIO_DATA_CNT_MISMATCH: /* recv/sent more/less data than exp. */ + scsi_set_resid(sc, icmnd_cmpl->residual); + sc->result = (DID_ERROR << 16) | icmnd_cmpl->scsi_status; + break; + + case FCPIO_OUT_OF_RESOURCE: /* out of resources to complete request */ + sc->result = (DID_REQUEUE << 16) | icmnd_cmpl->scsi_status; + break; + case FCPIO_INVALID_HEADER: /* header contains invalid data */ + case FCPIO_INVALID_PARAM: /* some parameter in request invalid */ + case FCPIO_REQ_NOT_SUPPORTED:/* request type is not supported */ + case FCPIO_IO_NOT_FOUND: /* requested I/O was not found */ + case FCPIO_SGL_INVALID: /* request was aborted due to sgl error */ + case FCPIO_MSS_INVALID: /* request was aborted due to mss error */ + case FCPIO_FW_ERR: /* request was terminated due fw error */ + default: + shost_printk(KERN_ERR, fnic->lport->host, "hdr status = %s\n", + fnic_fcpio_status_to_str(hdr_status)); + sc->result = (DID_ERROR << 16) | icmnd_cmpl->scsi_status; + break; + } + + /* Break link with the SCSI command */ + CMD_SP(sc) = NULL; + + spin_unlock_irqrestore(io_lock, flags); + + fnic_release_ioreq_buf(fnic, io_req, sc); + + mempool_free(io_req, fnic->io_req_pool); + + if (sc->sc_data_direction == DMA_FROM_DEVICE) { + fnic->lport->host_stats.fcp_input_requests++; + fnic->fcp_input_bytes += xfer_len; + } else if (sc->sc_data_direction == DMA_TO_DEVICE) { + fnic->lport->host_stats.fcp_output_requests++; + fnic->fcp_output_bytes += xfer_len; + } else + fnic->lport->host_stats.fcp_control_requests++; + + /* Call SCSI completion function to complete the IO */ + if (sc->scsi_done) + sc->scsi_done(sc); + +} + +/* fnic_fcpio_itmf_cmpl_handler + * Routine to handle itmf completions + */ +static void fnic_fcpio_itmf_cmpl_handler(struct fnic *fnic, + struct fcpio_fw_req *desc) +{ + u8 type; + u8 hdr_status; + struct fcpio_tag tag; + u32 id; + struct scsi_cmnd *sc; + struct fnic_io_req *io_req; + unsigned long flags; + spinlock_t *io_lock; + + fcpio_header_dec(&desc->hdr, &type, &hdr_status, &tag); + fcpio_tag_id_dec(&tag, &id); + + if ((id & FNIC_TAG_MASK) >= FNIC_MAX_IO_REQ) + return; + + sc = scsi_host_find_tag(fnic->lport->host, id & FNIC_TAG_MASK); + WARN_ON_ONCE(!sc); + if (!sc) + return; + + io_lock = fnic_io_lock_hash(fnic, sc); + spin_lock_irqsave(io_lock, flags); + io_req = (struct fnic_io_req *)CMD_SP(sc); + WARN_ON_ONCE(!io_req); + if (!io_req) { + spin_unlock_irqrestore(io_lock, flags); + return; + } + + if (id & FNIC_TAG_ABORT) { + /* Completion of abort cmd */ + if (CMD_STATE(sc) != FNIC_IOREQ_ABTS_PENDING) { + /* This is a late completion. Ignore it */ + spin_unlock_irqrestore(io_lock, flags); + return; + } + CMD_STATE(sc) = FNIC_IOREQ_ABTS_COMPLETE; + CMD_ABTS_STATUS(sc) = hdr_status; + + FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, + "abts cmpl recd. id %d status %s\n", + (int)(id & FNIC_TAG_MASK), + fnic_fcpio_status_to_str(hdr_status)); + + /* + * If scsi_eh thread is blocked waiting for abts to complete, + * signal completion to it. IO will be cleaned in the thread + * else clean it in this context + */ + if (io_req->abts_done) { + complete(io_req->abts_done); + spin_unlock_irqrestore(io_lock, flags); + } else { + FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, + "abts cmpl, completing IO\n"); + CMD_SP(sc) = NULL; + sc->result = (DID_ERROR << 16); + + spin_unlock_irqrestore(io_lock, flags); + + fnic_release_ioreq_buf(fnic, io_req, sc); + mempool_free(io_req, fnic->io_req_pool); + if (sc->scsi_done) + sc->scsi_done(sc); + } + + } else if (id & FNIC_TAG_DEV_RST) { + /* Completion of device reset */ + CMD_LR_STATUS(sc) = hdr_status; + CMD_STATE(sc) = FNIC_IOREQ_CMD_COMPLETE; + FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, + "dev reset cmpl recd. id %d status %s\n", + (int)(id & FNIC_TAG_MASK), + fnic_fcpio_status_to_str(hdr_status)); + if (io_req->dr_done) + complete(io_req->dr_done); + spin_unlock_irqrestore(io_lock, flags); + + } else { + shost_printk(KERN_ERR, fnic->lport->host, + "Unexpected itmf io state %s tag %x\n", + fnic_ioreq_state_to_str(CMD_STATE(sc)), id); + spin_unlock_irqrestore(io_lock, flags); + } + +} + +/* + * fnic_fcpio_cmpl_handler + * Routine to service the cq for wq_copy + */ +static int fnic_fcpio_cmpl_handler(struct vnic_dev *vdev, + unsigned int cq_index, + struct fcpio_fw_req *desc) +{ + struct fnic *fnic = vnic_dev_priv(vdev); + int ret = 0; + + switch (desc->hdr.type) { + case FCPIO_ACK: /* fw copied copy wq desc to its queue */ + fnic_fcpio_ack_handler(fnic, cq_index, desc); + break; + + case FCPIO_ICMND_CMPL: /* fw completed a command */ + fnic_fcpio_icmnd_cmpl_handler(fnic, desc); + break; + + case FCPIO_ITMF_CMPL: /* fw completed itmf (abort cmd, lun reset)*/ + fnic_fcpio_itmf_cmpl_handler(fnic, desc); + break; + + case FCPIO_FLOGI_REG_CMPL: /* fw completed flogi_reg */ + ret = fnic_fcpio_flogi_reg_cmpl_handler(fnic, desc); + break; + + case FCPIO_RESET_CMPL: /* fw completed reset */ + ret = fnic_fcpio_fw_reset_cmpl_handler(fnic, desc); + break; + + default: + FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, + "firmware completion type %d\n", + desc->hdr.type); + break; + } + + return ret; +} + +/* + * fnic_wq_copy_cmpl_handler + * Routine to process wq copy + */ +int fnic_wq_copy_cmpl_handler(struct fnic *fnic, int copy_work_to_do) +{ + unsigned int wq_work_done = 0; + unsigned int i, cq_index; + unsigned int cur_work_done; + + for (i = 0; i < fnic->wq_copy_count; i++) { + cq_index = i + fnic->raw_wq_count + fnic->rq_count; + cur_work_done = vnic_cq_copy_service(&fnic->cq[cq_index], + fnic_fcpio_cmpl_handler, + copy_work_to_do); + wq_work_done += cur_work_done; + } + return wq_work_done; +} + +static void fnic_cleanup_io(struct fnic *fnic, int exclude_id) +{ + unsigned int i; + struct fnic_io_req *io_req; + unsigned long flags = 0; + struct scsi_cmnd *sc; + spinlock_t *io_lock; + + for (i = 0; i < FNIC_MAX_IO_REQ; i++) { + if (i == exclude_id) + continue; + + sc = scsi_host_find_tag(fnic->lport->host, i); + if (!sc) + continue; + + io_lock = fnic_io_lock_hash(fnic, sc); + spin_lock_irqsave(io_lock, flags); + io_req = (struct fnic_io_req *)CMD_SP(sc); + if (!io_req) { + spin_unlock_irqrestore(io_lock, flags); + goto cleanup_scsi_cmd; + } + + CMD_SP(sc) = NULL; + + spin_unlock_irqrestore(io_lock, flags); + + /* + * If there is a scsi_cmnd associated with this io_req, then + * free the corresponding state + */ + fnic_release_ioreq_buf(fnic, io_req, sc); + mempool_free(io_req, fnic->io_req_pool); + +cleanup_scsi_cmd: + sc->result = DID_TRANSPORT_DISRUPTED << 16; + FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, "fnic_cleanup_io:" + " DID_TRANSPORT_DISRUPTED\n"); + + /* Complete the command to SCSI */ + if (sc->scsi_done) + sc->scsi_done(sc); + } +} + +void fnic_wq_copy_cleanup_handler(struct vnic_wq_copy *wq, + struct fcpio_host_req *desc) +{ + u32 id; + struct fnic *fnic = vnic_dev_priv(wq->vdev); + struct fnic_io_req *io_req; + struct scsi_cmnd *sc; + unsigned long flags; + spinlock_t *io_lock; + + /* get the tag reference */ + fcpio_tag_id_dec(&desc->hdr.tag, &id); + id &= FNIC_TAG_MASK; + + if (id >= FNIC_MAX_IO_REQ) + return; + + sc = scsi_host_find_tag(fnic->lport->host, id); + if (!sc) + return; + + io_lock = fnic_io_lock_hash(fnic, sc); + spin_lock_irqsave(io_lock, flags); + + /* Get the IO context which this desc refers to */ + io_req = (struct fnic_io_req *)CMD_SP(sc); + + /* fnic interrupts are turned off by now */ + + if (!io_req) { + spin_unlock_irqrestore(io_lock, flags); + goto wq_copy_cleanup_scsi_cmd; + } + + CMD_SP(sc) = NULL; + + spin_unlock_irqrestore(io_lock, flags); + + fnic_release_ioreq_buf(fnic, io_req, sc); + mempool_free(io_req, fnic->io_req_pool); + +wq_copy_cleanup_scsi_cmd: + sc->result = DID_NO_CONNECT << 16; + FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, "wq_copy_cleanup_handler:" + " DID_NO_CONNECT\n"); + + if (sc->scsi_done) + sc->scsi_done(sc); +} + +static inline int fnic_queue_abort_io_req(struct fnic *fnic, int tag, + u32 task_req, u8 *fc_lun, + struct fnic_io_req *io_req) +{ + struct vnic_wq_copy *wq = &fnic->wq_copy[0]; + unsigned long flags; + + spin_lock_irqsave(&fnic->wq_copy_lock[0], flags); + + if (vnic_wq_copy_desc_avail(wq) <= fnic->wq_copy_desc_low[0]) + free_wq_copy_descs(fnic, wq); + + if (!vnic_wq_copy_desc_avail(wq)) { + spin_unlock_irqrestore(&fnic->wq_copy_lock[0], flags); + return 1; + } + fnic_queue_wq_copy_desc_itmf(wq, tag | FNIC_TAG_ABORT, + 0, task_req, tag, fc_lun, io_req->port_id, + fnic->config.ra_tov, fnic->config.ed_tov); + + spin_unlock_irqrestore(&fnic->wq_copy_lock[0], flags); + return 0; +} + +void fnic_rport_exch_reset(struct fnic *fnic, u32 port_id) +{ + int tag; + struct fnic_io_req *io_req; + spinlock_t *io_lock; + unsigned long flags; + struct scsi_cmnd *sc; + struct scsi_lun fc_lun; + enum fnic_ioreq_state old_ioreq_state; + + FNIC_SCSI_DBG(KERN_DEBUG, + fnic->lport->host, + "fnic_rport_reset_exch called portid 0x%06x\n", + port_id); + + if (fnic->in_remove) + return; + + for (tag = 0; tag < FNIC_MAX_IO_REQ; tag++) { + sc = scsi_host_find_tag(fnic->lport->host, tag); + if (!sc) + continue; + + io_lock = fnic_io_lock_hash(fnic, sc); + spin_lock_irqsave(io_lock, flags); + + io_req = (struct fnic_io_req *)CMD_SP(sc); + + if (!io_req || io_req->port_id != port_id) { + spin_unlock_irqrestore(io_lock, flags); + continue; + } + + /* + * Found IO that is still pending with firmware and + * belongs to rport that went away + */ + if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING) { + spin_unlock_irqrestore(io_lock, flags); + continue; + } + old_ioreq_state = CMD_STATE(sc); + CMD_STATE(sc) = FNIC_IOREQ_ABTS_PENDING; + CMD_ABTS_STATUS(sc) = FCPIO_INVALID_CODE; + + BUG_ON(io_req->abts_done); + + FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, + "fnic_rport_reset_exch: Issuing abts\n"); + + spin_unlock_irqrestore(io_lock, flags); + + /* Now queue the abort command to firmware */ + int_to_scsilun(sc->device->lun, &fc_lun); + + if (fnic_queue_abort_io_req(fnic, tag, + FCPIO_ITMF_ABT_TASK_TERM, + fc_lun.scsi_lun, io_req)) { + /* + * Revert the cmd state back to old state, if + * it hasnt changed in between. This cmd will get + * aborted later by scsi_eh, or cleaned up during + * lun reset + */ + io_lock = fnic_io_lock_hash(fnic, sc); + + spin_lock_irqsave(io_lock, flags); + if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING) + CMD_STATE(sc) = old_ioreq_state; + spin_unlock_irqrestore(io_lock, flags); + } + } + +} + +void fnic_terminate_rport_io(struct fc_rport *rport) +{ + int tag; + struct fnic_io_req *io_req; + spinlock_t *io_lock; + unsigned long flags; + struct scsi_cmnd *sc; + struct scsi_lun fc_lun; + struct fc_rport_libfc_priv *rdata = rport->dd_data; + struct fc_lport *lport = rdata->local_port; + struct fnic *fnic = lport_priv(lport); + struct fc_rport *cmd_rport; + enum fnic_ioreq_state old_ioreq_state; + + FNIC_SCSI_DBG(KERN_DEBUG, + fnic->lport->host, "fnic_terminate_rport_io called" + " wwpn 0x%llx, wwnn0x%llx, portid 0x%06x\n", + rport->port_name, rport->node_name, + rport->port_id); + + if (fnic->in_remove) + return; + + for (tag = 0; tag < FNIC_MAX_IO_REQ; tag++) { + sc = scsi_host_find_tag(fnic->lport->host, tag); + if (!sc) + continue; + + cmd_rport = starget_to_rport(scsi_target(sc->device)); + if (rport != cmd_rport) + continue; + + io_lock = fnic_io_lock_hash(fnic, sc); + spin_lock_irqsave(io_lock, flags); + + io_req = (struct fnic_io_req *)CMD_SP(sc); + + if (!io_req || rport != cmd_rport) { + spin_unlock_irqrestore(io_lock, flags); + continue; + } + + /* + * Found IO that is still pending with firmware and + * belongs to rport that went away + */ + if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING) { + spin_unlock_irqrestore(io_lock, flags); + continue; + } + old_ioreq_state = CMD_STATE(sc); + CMD_STATE(sc) = FNIC_IOREQ_ABTS_PENDING; + CMD_ABTS_STATUS(sc) = FCPIO_INVALID_CODE; + + BUG_ON(io_req->abts_done); + + FNIC_SCSI_DBG(KERN_DEBUG, + fnic->lport->host, + "fnic_terminate_rport_io: Issuing abts\n"); + + spin_unlock_irqrestore(io_lock, flags); + + /* Now queue the abort command to firmware */ + int_to_scsilun(sc->device->lun, &fc_lun); + + if (fnic_queue_abort_io_req(fnic, tag, + FCPIO_ITMF_ABT_TASK_TERM, + fc_lun.scsi_lun, io_req)) { + /* + * Revert the cmd state back to old state, if + * it hasnt changed in between. This cmd will get + * aborted later by scsi_eh, or cleaned up during + * lun reset + */ + io_lock = fnic_io_lock_hash(fnic, sc); + + spin_lock_irqsave(io_lock, flags); + if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING) + CMD_STATE(sc) = old_ioreq_state; + spin_unlock_irqrestore(io_lock, flags); + } + } + +} + +static void fnic_block_error_handler(struct scsi_cmnd *sc) +{ + struct Scsi_Host *shost = sc->device->host; + struct fc_rport *rport = starget_to_rport(scsi_target(sc->device)); + unsigned long flags; + + spin_lock_irqsave(shost->host_lock, flags); + while (rport->port_state == FC_PORTSTATE_BLOCKED) { + spin_unlock_irqrestore(shost->host_lock, flags); + msleep(1000); + spin_lock_irqsave(shost->host_lock, flags); + } + spin_unlock_irqrestore(shost->host_lock, flags); + +} + +/* + * This function is exported to SCSI for sending abort cmnds. + * A SCSI IO is represented by a io_req in the driver. + * The ioreq is linked to the SCSI Cmd, thus a link with the ULP's IO. + */ +int fnic_abort_cmd(struct scsi_cmnd *sc) +{ + struct fc_lport *lp; + struct fnic *fnic; + struct fnic_io_req *io_req; + struct fc_rport *rport; + spinlock_t *io_lock; + unsigned long flags; + int ret = SUCCESS; + u32 task_req; + struct scsi_lun fc_lun; + DECLARE_COMPLETION_ONSTACK(tm_done); + + /* Wait for rport to unblock */ + fnic_block_error_handler(sc); + + /* Get local-port, check ready and link up */ + lp = shost_priv(sc->device->host); + + fnic = lport_priv(lp); + FNIC_SCSI_DBG(KERN_DEBUG, + fnic->lport->host, + "Abort Cmd called FCID 0x%x, LUN 0x%x TAG %d\n", + (starget_to_rport(scsi_target(sc->device)))->port_id, + sc->device->lun, sc->request->tag); + + if (lp->state != LPORT_ST_READY || !(lp->link_up)) { + ret = FAILED; + goto fnic_abort_cmd_end; + } + + /* + * Avoid a race between SCSI issuing the abort and the device + * completing the command. + * + * If the command is already completed by the fw cmpl code, + * we just return SUCCESS from here. This means that the abort + * succeeded. In the SCSI ML, since the timeout for command has + * happened, the completion wont actually complete the command + * and it will be considered as an aborted command + * + * The CMD_SP will not be cleared except while holding io_req_lock. + */ + io_lock = fnic_io_lock_hash(fnic, sc); + spin_lock_irqsave(io_lock, flags); + io_req = (struct fnic_io_req *)CMD_SP(sc); + if (!io_req) { + spin_unlock_irqrestore(io_lock, flags); + goto fnic_abort_cmd_end; + } + + io_req->abts_done = &tm_done; + + if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING) { + spin_unlock_irqrestore(io_lock, flags); + goto wait_pending; + } + /* + * Command is still pending, need to abort it + * If the firmware completes the command after this point, + * the completion wont be done till mid-layer, since abort + * has already started. + */ + CMD_STATE(sc) = FNIC_IOREQ_ABTS_PENDING; + CMD_ABTS_STATUS(sc) = FCPIO_INVALID_CODE; + + spin_unlock_irqrestore(io_lock, flags); + + /* + * Check readiness of the remote port. If the path to remote + * port is up, then send abts to the remote port to terminate + * the IO. Else, just locally terminate the IO in the firmware + */ + rport = starget_to_rport(scsi_target(sc->device)); + if (fc_remote_port_chkready(rport) == 0) + task_req = FCPIO_ITMF_ABT_TASK; + else + task_req = FCPIO_ITMF_ABT_TASK_TERM; + + /* Now queue the abort command to firmware */ + int_to_scsilun(sc->device->lun, &fc_lun); + + if (fnic_queue_abort_io_req(fnic, sc->request->tag, task_req, + fc_lun.scsi_lun, io_req)) { + spin_lock_irqsave(io_lock, flags); + io_req = (struct fnic_io_req *)CMD_SP(sc); + if (io_req) + io_req->abts_done = NULL; + spin_unlock_irqrestore(io_lock, flags); + ret = FAILED; + goto fnic_abort_cmd_end; + } + + /* + * We queued an abort IO, wait for its completion. + * Once the firmware completes the abort command, it will + * wake up this thread. + */ + wait_pending: + wait_for_completion_timeout(&tm_done, + msecs_to_jiffies + (2 * fnic->config.ra_tov + + fnic->config.ed_tov)); + + /* Check the abort status */ + spin_lock_irqsave(io_lock, flags); + + io_req = (struct fnic_io_req *)CMD_SP(sc); + if (!io_req) { + spin_unlock_irqrestore(io_lock, flags); + ret = FAILED; + goto fnic_abort_cmd_end; + } + io_req->abts_done = NULL; + + /* fw did not complete abort, timed out */ + if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING) { + spin_unlock_irqrestore(io_lock, flags); + ret = FAILED; + goto fnic_abort_cmd_end; + } + + /* + * firmware completed the abort, check the status, + * free the io_req irrespective of failure or success + */ + if (CMD_ABTS_STATUS(sc) != FCPIO_SUCCESS) + ret = FAILED; + + CMD_SP(sc) = NULL; + + spin_unlock_irqrestore(io_lock, flags); + + fnic_release_ioreq_buf(fnic, io_req, sc); + mempool_free(io_req, fnic->io_req_pool); + +fnic_abort_cmd_end: + FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, + "Returning from abort cmd %s\n", + (ret == SUCCESS) ? + "SUCCESS" : "FAILED"); + return ret; +} + +static inline int fnic_queue_dr_io_req(struct fnic *fnic, + struct scsi_cmnd *sc, + struct fnic_io_req *io_req) +{ + struct vnic_wq_copy *wq = &fnic->wq_copy[0]; + struct scsi_lun fc_lun; + int ret = 0; + unsigned long intr_flags; + + spin_lock_irqsave(&fnic->wq_copy_lock[0], intr_flags); + + if (vnic_wq_copy_desc_avail(wq) <= fnic->wq_copy_desc_low[0]) + free_wq_copy_descs(fnic, wq); + + if (!vnic_wq_copy_desc_avail(wq)) { + ret = -EAGAIN; + goto lr_io_req_end; + } + + /* fill in the lun info */ + int_to_scsilun(sc->device->lun, &fc_lun); + + fnic_queue_wq_copy_desc_itmf(wq, sc->request->tag | FNIC_TAG_DEV_RST, + 0, FCPIO_ITMF_LUN_RESET, SCSI_NO_TAG, + fc_lun.scsi_lun, io_req->port_id, + fnic->config.ra_tov, fnic->config.ed_tov); + +lr_io_req_end: + spin_unlock_irqrestore(&fnic->wq_copy_lock[0], intr_flags); + + return ret; +} + +/* + * Clean up any pending aborts on the lun + * For each outstanding IO on this lun, whose abort is not completed by fw, + * issue a local abort. Wait for abort to complete. Return 0 if all commands + * successfully aborted, 1 otherwise + */ +static int fnic_clean_pending_aborts(struct fnic *fnic, + struct scsi_cmnd *lr_sc) +{ + int tag; + struct fnic_io_req *io_req; + spinlock_t *io_lock; + unsigned long flags; + int ret = 0; + struct scsi_cmnd *sc; + struct fc_rport *rport; + struct scsi_lun fc_lun; + struct scsi_device *lun_dev = lr_sc->device; + DECLARE_COMPLETION_ONSTACK(tm_done); + + for (tag = 0; tag < FNIC_MAX_IO_REQ; tag++) { + sc = scsi_host_find_tag(fnic->lport->host, tag); + /* + * ignore this lun reset cmd or cmds that do not belong to + * this lun + */ + if (!sc || sc == lr_sc || sc->device != lun_dev) + continue; + + io_lock = fnic_io_lock_hash(fnic, sc); + spin_lock_irqsave(io_lock, flags); + + io_req = (struct fnic_io_req *)CMD_SP(sc); + + if (!io_req || sc->device != lun_dev) { + spin_unlock_irqrestore(io_lock, flags); + continue; + } + + /* + * Found IO that is still pending with firmware and + * belongs to the LUN that we are resetting + */ + FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, + "Found IO in %s on lun\n", + fnic_ioreq_state_to_str(CMD_STATE(sc))); + + BUG_ON(CMD_STATE(sc) != FNIC_IOREQ_ABTS_PENDING); + + CMD_ABTS_STATUS(sc) = FCPIO_INVALID_CODE; + io_req->abts_done = &tm_done; + spin_unlock_irqrestore(io_lock, flags); + + /* Now queue the abort command to firmware */ + int_to_scsilun(sc->device->lun, &fc_lun); + rport = starget_to_rport(scsi_target(sc->device)); + + if (fnic_queue_abort_io_req(fnic, tag, + FCPIO_ITMF_ABT_TASK_TERM, + fc_lun.scsi_lun, io_req)) { + spin_lock_irqsave(io_lock, flags); + io_req = (struct fnic_io_req *)CMD_SP(sc); + if (io_req) + io_req->abts_done = NULL; + spin_unlock_irqrestore(io_lock, flags); + ret = 1; + goto clean_pending_aborts_end; + } + + wait_for_completion_timeout(&tm_done, + msecs_to_jiffies + (fnic->config.ed_tov)); + + /* Recheck cmd state to check if it is now aborted */ + spin_lock_irqsave(io_lock, flags); + io_req = (struct fnic_io_req *)CMD_SP(sc); + if (!io_req) { + spin_unlock_irqrestore(io_lock, flags); + ret = 1; + goto clean_pending_aborts_end; + } + + io_req->abts_done = NULL; + + /* if abort is still pending with fw, fail */ + if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING) { + spin_unlock_irqrestore(io_lock, flags); + ret = 1; + goto clean_pending_aborts_end; + } + CMD_SP(sc) = NULL; + spin_unlock_irqrestore(io_lock, flags); + + fnic_release_ioreq_buf(fnic, io_req, sc); + mempool_free(io_req, fnic->io_req_pool); + } + +clean_pending_aborts_end: + return ret; +} + +/* + * SCSI Eh thread issues a Lun Reset when one or more commands on a LUN + * fail to get aborted. It calls driver's eh_device_reset with a SCSI command + * on the LUN. + */ +int fnic_device_reset(struct scsi_cmnd *sc) +{ + struct fc_lport *lp; + struct fnic *fnic; + struct fnic_io_req *io_req; + struct fc_rport *rport; + int status; + int ret = FAILED; + spinlock_t *io_lock; + unsigned long flags; + DECLARE_COMPLETION_ONSTACK(tm_done); + + /* Wait for rport to unblock */ + fnic_block_error_handler(sc); + + /* Get local-port, check ready and link up */ + lp = shost_priv(sc->device->host); + + fnic = lport_priv(lp); + FNIC_SCSI_DBG(KERN_DEBUG, + fnic->lport->host, + "Device reset called FCID 0x%x, LUN 0x%x\n", + (starget_to_rport(scsi_target(sc->device)))->port_id, + sc->device->lun); + + + if (lp->state != LPORT_ST_READY || !(lp->link_up)) + goto fnic_device_reset_end; + + /* Check if remote port up */ + rport = starget_to_rport(scsi_target(sc->device)); + if (fc_remote_port_chkready(rport)) + goto fnic_device_reset_end; + + io_lock = fnic_io_lock_hash(fnic, sc); + spin_lock_irqsave(io_lock, flags); + io_req = (struct fnic_io_req *)CMD_SP(sc); + + /* + * If there is a io_req attached to this command, then use it, + * else allocate a new one. + */ + if (!io_req) { + io_req = mempool_alloc(fnic->io_req_pool, GFP_ATOMIC); + if (!io_req) { + spin_unlock_irqrestore(io_lock, flags); + goto fnic_device_reset_end; + } + memset(io_req, 0, sizeof(*io_req)); + io_req->port_id = rport->port_id; + CMD_SP(sc) = (char *)io_req; + } + io_req->dr_done = &tm_done; + CMD_STATE(sc) = FNIC_IOREQ_CMD_PENDING; + CMD_LR_STATUS(sc) = FCPIO_INVALID_CODE; + spin_unlock_irqrestore(io_lock, flags); + + FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, "TAG %d\n", + sc->request->tag); + + /* + * issue the device reset, if enqueue failed, clean up the ioreq + * and break assoc with scsi cmd + */ + if (fnic_queue_dr_io_req(fnic, sc, io_req)) { + spin_lock_irqsave(io_lock, flags); + io_req = (struct fnic_io_req *)CMD_SP(sc); + if (io_req) + io_req->dr_done = NULL; + goto fnic_device_reset_clean; + } + + /* + * Wait on the local completion for LUN reset. The io_req may be + * freed while we wait since we hold no lock. + */ + wait_for_completion_timeout(&tm_done, + msecs_to_jiffies(FNIC_LUN_RESET_TIMEOUT)); + + spin_lock_irqsave(io_lock, flags); + io_req = (struct fnic_io_req *)CMD_SP(sc); + if (!io_req) { + spin_unlock_irqrestore(io_lock, flags); + goto fnic_device_reset_end; + } + io_req->dr_done = NULL; + + status = CMD_LR_STATUS(sc); + spin_unlock_irqrestore(io_lock, flags); + + /* + * If lun reset not completed, bail out with failed. io_req + * gets cleaned up during higher levels of EH + */ + if (status == FCPIO_INVALID_CODE) { + FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, + "Device reset timed out\n"); + goto fnic_device_reset_end; + } + + /* Completed, but not successful, clean up the io_req, return fail */ + if (status != FCPIO_SUCCESS) { + spin_lock_irqsave(io_lock, flags); + FNIC_SCSI_DBG(KERN_DEBUG, + fnic->lport->host, + "Device reset completed - failed\n"); + io_req = (struct fnic_io_req *)CMD_SP(sc); + goto fnic_device_reset_clean; + } + + /* + * Clean up any aborts on this lun that have still not + * completed. If any of these fail, then LUN reset fails. + * clean_pending_aborts cleans all cmds on this lun except + * the lun reset cmd. If all cmds get cleaned, the lun reset + * succeeds + */ + if (fnic_clean_pending_aborts(fnic, sc)) { + spin_lock_irqsave(io_lock, flags); + io_req = (struct fnic_io_req *)CMD_SP(sc); + FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, + "Device reset failed" + " since could not abort all IOs\n"); + goto fnic_device_reset_clean; + } + + /* Clean lun reset command */ + spin_lock_irqsave(io_lock, flags); + io_req = (struct fnic_io_req *)CMD_SP(sc); + if (io_req) + /* Completed, and successful */ + ret = SUCCESS; + +fnic_device_reset_clean: + if (io_req) + CMD_SP(sc) = NULL; + + spin_unlock_irqrestore(io_lock, flags); + + if (io_req) { + fnic_release_ioreq_buf(fnic, io_req, sc); + mempool_free(io_req, fnic->io_req_pool); + } + +fnic_device_reset_end: + FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, + "Returning from device reset %s\n", + (ret == SUCCESS) ? + "SUCCESS" : "FAILED"); + return ret; +} + +/* Clean up all IOs, clean up libFC local port */ +int fnic_reset(struct Scsi_Host *shost) +{ + struct fc_lport *lp; + struct fnic *fnic; + int ret = SUCCESS; + + lp = shost_priv(shost); + fnic = lport_priv(lp); + + FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, + "fnic_reset called\n"); + + /* + * Reset local port, this will clean up libFC exchanges, + * reset remote port sessions, and if link is up, begin flogi + */ + if (lp->tt.lport_reset(lp)) + ret = FAILED; + + FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, + "Returning from fnic reset %s\n", + (ret == SUCCESS) ? + "SUCCESS" : "FAILED"); + + return ret; +} + +/* + * SCSI Error handling calls driver's eh_host_reset if all prior + * error handling levels return FAILED. If host reset completes + * successfully, and if link is up, then Fabric login begins. + * + * Host Reset is the highest level of error recovery. If this fails, then + * host is offlined by SCSI. + * + */ +int fnic_host_reset(struct scsi_cmnd *sc) +{ + int ret; + unsigned long wait_host_tmo; + struct Scsi_Host *shost = sc->device->host; + struct fc_lport *lp = shost_priv(shost); + + /* + * If fnic_reset is successful, wait for fabric login to complete + * scsi-ml tries to send a TUR to every device if host reset is + * successful, so before returning to scsi, fabric should be up + */ + ret = fnic_reset(shost); + if (ret == SUCCESS) { + wait_host_tmo = jiffies + FNIC_HOST_RESET_SETTLE_TIME * HZ; + ret = FAILED; + while (time_before(jiffies, wait_host_tmo)) { + if ((lp->state == LPORT_ST_READY) && + (lp->link_up)) { + ret = SUCCESS; + break; + } + ssleep(1); + } + } + + return ret; +} + +/* + * This fxn is called from libFC when host is removed + */ +void fnic_scsi_abort_io(struct fc_lport *lp) +{ + int err = 0; + unsigned long flags; + enum fnic_state old_state; + struct fnic *fnic = lport_priv(lp); + DECLARE_COMPLETION_ONSTACK(remove_wait); + + /* Issue firmware reset for fnic, wait for reset to complete */ + spin_lock_irqsave(&fnic->fnic_lock, flags); + fnic->remove_wait = &remove_wait; + old_state = fnic->state; + fnic->state = FNIC_IN_FC_TRANS_ETH_MODE; + vnic_dev_del_addr(fnic->vdev, fnic->data_src_addr); + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + + err = fnic_fw_reset_handler(fnic); + if (err) { + spin_lock_irqsave(&fnic->fnic_lock, flags); + if (fnic->state == FNIC_IN_FC_TRANS_ETH_MODE) + fnic->state = old_state; + fnic->remove_wait = NULL; + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + return; + } + + /* Wait for firmware reset to complete */ + wait_for_completion_timeout(&remove_wait, + msecs_to_jiffies(FNIC_RMDEVICE_TIMEOUT)); + + spin_lock_irqsave(&fnic->fnic_lock, flags); + fnic->remove_wait = NULL; + FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, + "fnic_scsi_abort_io %s\n", + (fnic->state == FNIC_IN_ETH_MODE) ? + "SUCCESS" : "FAILED"); + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + +} + +/* + * This fxn called from libFC to clean up driver IO state on link down + */ +void fnic_scsi_cleanup(struct fc_lport *lp) +{ + unsigned long flags; + enum fnic_state old_state; + struct fnic *fnic = lport_priv(lp); + + /* issue fw reset */ + spin_lock_irqsave(&fnic->fnic_lock, flags); + old_state = fnic->state; + fnic->state = FNIC_IN_FC_TRANS_ETH_MODE; + vnic_dev_del_addr(fnic->vdev, fnic->data_src_addr); + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + + if (fnic_fw_reset_handler(fnic)) { + spin_lock_irqsave(&fnic->fnic_lock, flags); + if (fnic->state == FNIC_IN_FC_TRANS_ETH_MODE) + fnic->state = old_state; + spin_unlock_irqrestore(&fnic->fnic_lock, flags); + } + +} + +void fnic_empty_scsi_cleanup(struct fc_lport *lp) +{ +} + +void fnic_exch_mgr_reset(struct fc_lport *lp, u32 sid, u32 did) +{ + struct fnic *fnic = lport_priv(lp); + + /* Non-zero sid, nothing to do */ + if (sid) + goto call_fc_exch_mgr_reset; + + if (did) { + fnic_rport_exch_reset(fnic, did); + goto call_fc_exch_mgr_reset; + } + + /* + * sid = 0, did = 0 + * link down or device being removed + */ + if (!fnic->in_remove) + fnic_scsi_cleanup(lp); + else + fnic_scsi_abort_io(lp); + + /* call libFC exch mgr reset to reset its exchanges */ +call_fc_exch_mgr_reset: + fc_exch_mgr_reset(lp, sid, did); + +} diff --git a/drivers/scsi/fnic/rq_enet_desc.h b/drivers/scsi/fnic/rq_enet_desc.h new file mode 100644 index 00000000000..92e80ae6b72 --- /dev/null +++ b/drivers/scsi/fnic/rq_enet_desc.h @@ -0,0 +1,58 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef _RQ_ENET_DESC_H_ +#define _RQ_ENET_DESC_H_ + +/* Ethernet receive queue descriptor: 16B */ +struct rq_enet_desc { + __le64 address; + __le16 length_type; + u8 reserved[6]; +}; + +enum rq_enet_type_types { + RQ_ENET_TYPE_ONLY_SOP = 0, + RQ_ENET_TYPE_NOT_SOP = 1, + RQ_ENET_TYPE_RESV2 = 2, + RQ_ENET_TYPE_RESV3 = 3, +}; + +#define RQ_ENET_ADDR_BITS 64 +#define RQ_ENET_LEN_BITS 14 +#define RQ_ENET_LEN_MASK ((1 << RQ_ENET_LEN_BITS) - 1) +#define RQ_ENET_TYPE_BITS 2 +#define RQ_ENET_TYPE_MASK ((1 << RQ_ENET_TYPE_BITS) - 1) + +static inline void rq_enet_desc_enc(struct rq_enet_desc *desc, + u64 address, u8 type, u16 length) +{ + desc->address = cpu_to_le64(address); + desc->length_type = cpu_to_le16((length & RQ_ENET_LEN_MASK) | + ((type & RQ_ENET_TYPE_MASK) << RQ_ENET_LEN_BITS)); +} + +static inline void rq_enet_desc_dec(struct rq_enet_desc *desc, + u64 *address, u8 *type, u16 *length) +{ + *address = le64_to_cpu(desc->address); + *length = le16_to_cpu(desc->length_type) & RQ_ENET_LEN_MASK; + *type = (u8)((le16_to_cpu(desc->length_type) >> RQ_ENET_LEN_BITS) & + RQ_ENET_TYPE_MASK); +} + +#endif /* _RQ_ENET_DESC_H_ */ diff --git a/drivers/scsi/fnic/vnic_cq.c b/drivers/scsi/fnic/vnic_cq.c new file mode 100644 index 00000000000..c5db32eda5e --- /dev/null +++ b/drivers/scsi/fnic/vnic_cq.c @@ -0,0 +1,85 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#include +#include +#include +#include "vnic_dev.h" +#include "vnic_cq.h" + +void vnic_cq_free(struct vnic_cq *cq) +{ + vnic_dev_free_desc_ring(cq->vdev, &cq->ring); + + cq->ctrl = NULL; +} + +int vnic_cq_alloc(struct vnic_dev *vdev, struct vnic_cq *cq, unsigned int index, + unsigned int desc_count, unsigned int desc_size) +{ + int err; + + cq->index = index; + cq->vdev = vdev; + + cq->ctrl = vnic_dev_get_res(vdev, RES_TYPE_CQ, index); + if (!cq->ctrl) { + printk(KERN_ERR "Failed to hook CQ[%d] resource\n", index); + return -EINVAL; + } + + err = vnic_dev_alloc_desc_ring(vdev, &cq->ring, desc_count, desc_size); + if (err) + return err; + + return 0; +} + +void vnic_cq_init(struct vnic_cq *cq, unsigned int flow_control_enable, + unsigned int color_enable, unsigned int cq_head, unsigned int cq_tail, + unsigned int cq_tail_color, unsigned int interrupt_enable, + unsigned int cq_entry_enable, unsigned int cq_message_enable, + unsigned int interrupt_offset, u64 cq_message_addr) +{ + u64 paddr; + + paddr = (u64)cq->ring.base_addr | VNIC_PADDR_TARGET; + writeq(paddr, &cq->ctrl->ring_base); + iowrite32(cq->ring.desc_count, &cq->ctrl->ring_size); + iowrite32(flow_control_enable, &cq->ctrl->flow_control_enable); + iowrite32(color_enable, &cq->ctrl->color_enable); + iowrite32(cq_head, &cq->ctrl->cq_head); + iowrite32(cq_tail, &cq->ctrl->cq_tail); + iowrite32(cq_tail_color, &cq->ctrl->cq_tail_color); + iowrite32(interrupt_enable, &cq->ctrl->interrupt_enable); + iowrite32(cq_entry_enable, &cq->ctrl->cq_entry_enable); + iowrite32(cq_message_enable, &cq->ctrl->cq_message_enable); + iowrite32(interrupt_offset, &cq->ctrl->interrupt_offset); + writeq(cq_message_addr, &cq->ctrl->cq_message_addr); +} + +void vnic_cq_clean(struct vnic_cq *cq) +{ + cq->to_clean = 0; + cq->last_color = 0; + + iowrite32(0, &cq->ctrl->cq_head); + iowrite32(0, &cq->ctrl->cq_tail); + iowrite32(1, &cq->ctrl->cq_tail_color); + + vnic_dev_clear_desc_ring(&cq->ring); +} diff --git a/drivers/scsi/fnic/vnic_cq.h b/drivers/scsi/fnic/vnic_cq.h new file mode 100644 index 00000000000..4ede6809fb1 --- /dev/null +++ b/drivers/scsi/fnic/vnic_cq.h @@ -0,0 +1,121 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef _VNIC_CQ_H_ +#define _VNIC_CQ_H_ + +#include "cq_desc.h" +#include "vnic_dev.h" + +/* + * These defines avoid symbol clash between fnic and enic (Cisco 10G Eth + * Driver) when both are built with CONFIG options =y + */ +#define vnic_cq_service fnic_cq_service +#define vnic_cq_free fnic_cq_free +#define vnic_cq_alloc fnic_cq_alloc +#define vnic_cq_init fnic_cq_init +#define vnic_cq_clean fnic_cq_clean + +/* Completion queue control */ +struct vnic_cq_ctrl { + u64 ring_base; /* 0x00 */ + u32 ring_size; /* 0x08 */ + u32 pad0; + u32 flow_control_enable; /* 0x10 */ + u32 pad1; + u32 color_enable; /* 0x18 */ + u32 pad2; + u32 cq_head; /* 0x20 */ + u32 pad3; + u32 cq_tail; /* 0x28 */ + u32 pad4; + u32 cq_tail_color; /* 0x30 */ + u32 pad5; + u32 interrupt_enable; /* 0x38 */ + u32 pad6; + u32 cq_entry_enable; /* 0x40 */ + u32 pad7; + u32 cq_message_enable; /* 0x48 */ + u32 pad8; + u32 interrupt_offset; /* 0x50 */ + u32 pad9; + u64 cq_message_addr; /* 0x58 */ + u32 pad10; +}; + +struct vnic_cq { + unsigned int index; + struct vnic_dev *vdev; + struct vnic_cq_ctrl __iomem *ctrl; /* memory-mapped */ + struct vnic_dev_ring ring; + unsigned int to_clean; + unsigned int last_color; +}; + +static inline unsigned int vnic_cq_service(struct vnic_cq *cq, + unsigned int work_to_do, + int (*q_service)(struct vnic_dev *vdev, struct cq_desc *cq_desc, + u8 type, u16 q_number, u16 completed_index, void *opaque), + void *opaque) +{ + struct cq_desc *cq_desc; + unsigned int work_done = 0; + u16 q_number, completed_index; + u8 type, color; + + cq_desc = (struct cq_desc *)((u8 *)cq->ring.descs + + cq->ring.desc_size * cq->to_clean); + cq_desc_dec(cq_desc, &type, &color, + &q_number, &completed_index); + + while (color != cq->last_color) { + + if ((*q_service)(cq->vdev, cq_desc, type, + q_number, completed_index, opaque)) + break; + + cq->to_clean++; + if (cq->to_clean == cq->ring.desc_count) { + cq->to_clean = 0; + cq->last_color = cq->last_color ? 0 : 1; + } + + cq_desc = (struct cq_desc *)((u8 *)cq->ring.descs + + cq->ring.desc_size * cq->to_clean); + cq_desc_dec(cq_desc, &type, &color, + &q_number, &completed_index); + + work_done++; + if (work_done >= work_to_do) + break; + } + + return work_done; +} + +void vnic_cq_free(struct vnic_cq *cq); +int vnic_cq_alloc(struct vnic_dev *vdev, struct vnic_cq *cq, unsigned int index, + unsigned int desc_count, unsigned int desc_size); +void vnic_cq_init(struct vnic_cq *cq, unsigned int flow_control_enable, + unsigned int color_enable, unsigned int cq_head, unsigned int cq_tail, + unsigned int cq_tail_color, unsigned int interrupt_enable, + unsigned int cq_entry_enable, unsigned int message_enable, + unsigned int interrupt_offset, u64 message_addr); +void vnic_cq_clean(struct vnic_cq *cq); + +#endif /* _VNIC_CQ_H_ */ diff --git a/drivers/scsi/fnic/vnic_cq_copy.h b/drivers/scsi/fnic/vnic_cq_copy.h new file mode 100644 index 00000000000..7901ce255a8 --- /dev/null +++ b/drivers/scsi/fnic/vnic_cq_copy.h @@ -0,0 +1,62 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef _VNIC_CQ_COPY_H_ +#define _VNIC_CQ_COPY_H_ + +#include "fcpio.h" + +static inline unsigned int vnic_cq_copy_service( + struct vnic_cq *cq, + int (*q_service)(struct vnic_dev *vdev, + unsigned int index, + struct fcpio_fw_req *desc), + unsigned int work_to_do) + +{ + struct fcpio_fw_req *desc; + unsigned int work_done = 0; + u8 color; + + desc = (struct fcpio_fw_req *)((u8 *)cq->ring.descs + + cq->ring.desc_size * cq->to_clean); + fcpio_color_dec(desc, &color); + + while (color != cq->last_color) { + + if ((*q_service)(cq->vdev, cq->index, desc)) + break; + + cq->to_clean++; + if (cq->to_clean == cq->ring.desc_count) { + cq->to_clean = 0; + cq->last_color = cq->last_color ? 0 : 1; + } + + desc = (struct fcpio_fw_req *)((u8 *)cq->ring.descs + + cq->ring.desc_size * cq->to_clean); + fcpio_color_dec(desc, &color); + + work_done++; + if (work_done >= work_to_do) + break; + } + + return work_done; +} + +#endif /* _VNIC_CQ_COPY_H_ */ diff --git a/drivers/scsi/fnic/vnic_dev.c b/drivers/scsi/fnic/vnic_dev.c new file mode 100644 index 00000000000..56677064508 --- /dev/null +++ b/drivers/scsi/fnic/vnic_dev.c @@ -0,0 +1,690 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#include +#include +#include +#include +#include +#include +#include "vnic_resource.h" +#include "vnic_devcmd.h" +#include "vnic_dev.h" +#include "vnic_stats.h" + +struct vnic_res { + void __iomem *vaddr; + unsigned int count; +}; + +struct vnic_dev { + void *priv; + struct pci_dev *pdev; + struct vnic_res res[RES_TYPE_MAX]; + enum vnic_dev_intr_mode intr_mode; + struct vnic_devcmd __iomem *devcmd; + struct vnic_devcmd_notify *notify; + struct vnic_devcmd_notify notify_copy; + dma_addr_t notify_pa; + u32 *linkstatus; + dma_addr_t linkstatus_pa; + struct vnic_stats *stats; + dma_addr_t stats_pa; + struct vnic_devcmd_fw_info *fw_info; + dma_addr_t fw_info_pa; +}; + +#define VNIC_MAX_RES_HDR_SIZE \ + (sizeof(struct vnic_resource_header) + \ + sizeof(struct vnic_resource) * RES_TYPE_MAX) +#define VNIC_RES_STRIDE 128 + +void *vnic_dev_priv(struct vnic_dev *vdev) +{ + return vdev->priv; +} + +static int vnic_dev_discover_res(struct vnic_dev *vdev, + struct vnic_dev_bar *bar) +{ + struct vnic_resource_header __iomem *rh; + struct vnic_resource __iomem *r; + u8 type; + + if (bar->len < VNIC_MAX_RES_HDR_SIZE) { + printk(KERN_ERR "vNIC BAR0 res hdr length error\n"); + return -EINVAL; + } + + rh = bar->vaddr; + if (!rh) { + printk(KERN_ERR "vNIC BAR0 res hdr not mem-mapped\n"); + return -EINVAL; + } + + if (ioread32(&rh->magic) != VNIC_RES_MAGIC || + ioread32(&rh->version) != VNIC_RES_VERSION) { + printk(KERN_ERR "vNIC BAR0 res magic/version error " + "exp (%lx/%lx) curr (%x/%x)\n", + VNIC_RES_MAGIC, VNIC_RES_VERSION, + ioread32(&rh->magic), ioread32(&rh->version)); + return -EINVAL; + } + + r = (struct vnic_resource __iomem *)(rh + 1); + + while ((type = ioread8(&r->type)) != RES_TYPE_EOL) { + + u8 bar_num = ioread8(&r->bar); + u32 bar_offset = ioread32(&r->bar_offset); + u32 count = ioread32(&r->count); + u32 len; + + r++; + + if (bar_num != 0) /* only mapping in BAR0 resources */ + continue; + + switch (type) { + case RES_TYPE_WQ: + case RES_TYPE_RQ: + case RES_TYPE_CQ: + case RES_TYPE_INTR_CTRL: + /* each count is stride bytes long */ + len = count * VNIC_RES_STRIDE; + if (len + bar_offset > bar->len) { + printk(KERN_ERR "vNIC BAR0 resource %d " + "out-of-bounds, offset 0x%x + " + "size 0x%x > bar len 0x%lx\n", + type, bar_offset, + len, + bar->len); + return -EINVAL; + } + break; + case RES_TYPE_INTR_PBA_LEGACY: + case RES_TYPE_DEVCMD: + len = count; + break; + default: + continue; + } + + vdev->res[type].count = count; + vdev->res[type].vaddr = (char __iomem *)bar->vaddr + bar_offset; + } + + return 0; +} + +unsigned int vnic_dev_get_res_count(struct vnic_dev *vdev, + enum vnic_res_type type) +{ + return vdev->res[type].count; +} + +void __iomem *vnic_dev_get_res(struct vnic_dev *vdev, enum vnic_res_type type, + unsigned int index) +{ + if (!vdev->res[type].vaddr) + return NULL; + + switch (type) { + case RES_TYPE_WQ: + case RES_TYPE_RQ: + case RES_TYPE_CQ: + case RES_TYPE_INTR_CTRL: + return (char __iomem *)vdev->res[type].vaddr + + index * VNIC_RES_STRIDE; + default: + return (char __iomem *)vdev->res[type].vaddr; + } +} + +unsigned int vnic_dev_desc_ring_size(struct vnic_dev_ring *ring, + unsigned int desc_count, + unsigned int desc_size) +{ + /* The base address of the desc rings must be 512 byte aligned. + * Descriptor count is aligned to groups of 32 descriptors. A + * count of 0 means the maximum 4096 descriptors. Descriptor + * size is aligned to 16 bytes. + */ + + unsigned int count_align = 32; + unsigned int desc_align = 16; + + ring->base_align = 512; + + if (desc_count == 0) + desc_count = 4096; + + ring->desc_count = ALIGN(desc_count, count_align); + + ring->desc_size = ALIGN(desc_size, desc_align); + + ring->size = ring->desc_count * ring->desc_size; + ring->size_unaligned = ring->size + ring->base_align; + + return ring->size_unaligned; +} + +void vnic_dev_clear_desc_ring(struct vnic_dev_ring *ring) +{ + memset(ring->descs, 0, ring->size); +} + +int vnic_dev_alloc_desc_ring(struct vnic_dev *vdev, struct vnic_dev_ring *ring, + unsigned int desc_count, unsigned int desc_size) +{ + vnic_dev_desc_ring_size(ring, desc_count, desc_size); + + ring->descs_unaligned = pci_alloc_consistent(vdev->pdev, + ring->size_unaligned, + &ring->base_addr_unaligned); + + if (!ring->descs_unaligned) { + printk(KERN_ERR + "Failed to allocate ring (size=%d), aborting\n", + (int)ring->size); + return -ENOMEM; + } + + ring->base_addr = ALIGN(ring->base_addr_unaligned, + ring->base_align); + ring->descs = (u8 *)ring->descs_unaligned + + (ring->base_addr - ring->base_addr_unaligned); + + vnic_dev_clear_desc_ring(ring); + + ring->desc_avail = ring->desc_count - 1; + + return 0; +} + +void vnic_dev_free_desc_ring(struct vnic_dev *vdev, struct vnic_dev_ring *ring) +{ + if (ring->descs) { + pci_free_consistent(vdev->pdev, + ring->size_unaligned, + ring->descs_unaligned, + ring->base_addr_unaligned); + ring->descs = NULL; + } +} + +int vnic_dev_cmd(struct vnic_dev *vdev, enum vnic_devcmd_cmd cmd, + u64 *a0, u64 *a1, int wait) +{ + struct vnic_devcmd __iomem *devcmd = vdev->devcmd; + int delay; + u32 status; + int dev_cmd_err[] = { + /* convert from fw's version of error.h to host's version */ + 0, /* ERR_SUCCESS */ + EINVAL, /* ERR_EINVAL */ + EFAULT, /* ERR_EFAULT */ + EPERM, /* ERR_EPERM */ + EBUSY, /* ERR_EBUSY */ + }; + int err; + + status = ioread32(&devcmd->status); + if (status & STAT_BUSY) { + printk(KERN_ERR "Busy devcmd %d\n", _CMD_N(cmd)); + return -EBUSY; + } + + if (_CMD_DIR(cmd) & _CMD_DIR_WRITE) { + writeq(*a0, &devcmd->args[0]); + writeq(*a1, &devcmd->args[1]); + wmb(); + } + + iowrite32(cmd, &devcmd->cmd); + + if ((_CMD_FLAGS(cmd) & _CMD_FLAGS_NOWAIT)) + return 0; + + for (delay = 0; delay < wait; delay++) { + + udelay(100); + + status = ioread32(&devcmd->status); + if (!(status & STAT_BUSY)) { + + if (status & STAT_ERROR) { + err = dev_cmd_err[(int)readq(&devcmd->args[0])]; + printk(KERN_ERR "Error %d devcmd %d\n", + err, _CMD_N(cmd)); + return -err; + } + + if (_CMD_DIR(cmd) & _CMD_DIR_READ) { + rmb(); + *a0 = readq(&devcmd->args[0]); + *a1 = readq(&devcmd->args[1]); + } + + return 0; + } + } + + printk(KERN_ERR "Timedout devcmd %d\n", _CMD_N(cmd)); + return -ETIMEDOUT; +} + +int vnic_dev_fw_info(struct vnic_dev *vdev, + struct vnic_devcmd_fw_info **fw_info) +{ + u64 a0, a1 = 0; + int wait = 1000; + int err = 0; + + if (!vdev->fw_info) { + vdev->fw_info = pci_alloc_consistent(vdev->pdev, + sizeof(struct vnic_devcmd_fw_info), + &vdev->fw_info_pa); + if (!vdev->fw_info) + return -ENOMEM; + + a0 = vdev->fw_info_pa; + + /* only get fw_info once and cache it */ + err = vnic_dev_cmd(vdev, CMD_MCPU_FW_INFO, &a0, &a1, wait); + } + + *fw_info = vdev->fw_info; + + return err; +} + +int vnic_dev_spec(struct vnic_dev *vdev, unsigned int offset, unsigned int size, + void *value) +{ + u64 a0, a1; + int wait = 1000; + int err; + + a0 = offset; + a1 = size; + + err = vnic_dev_cmd(vdev, CMD_DEV_SPEC, &a0, &a1, wait); + + switch (size) { + case 1: + *(u8 *)value = (u8)a0; + break; + case 2: + *(u16 *)value = (u16)a0; + break; + case 4: + *(u32 *)value = (u32)a0; + break; + case 8: + *(u64 *)value = a0; + break; + default: + BUG(); + break; + } + + return err; +} + +int vnic_dev_stats_clear(struct vnic_dev *vdev) +{ + u64 a0 = 0, a1 = 0; + int wait = 1000; + return vnic_dev_cmd(vdev, CMD_STATS_CLEAR, &a0, &a1, wait); +} + +int vnic_dev_stats_dump(struct vnic_dev *vdev, struct vnic_stats **stats) +{ + u64 a0, a1; + int wait = 1000; + + if (!vdev->stats) { + vdev->stats = pci_alloc_consistent(vdev->pdev, + sizeof(struct vnic_stats), &vdev->stats_pa); + if (!vdev->stats) + return -ENOMEM; + } + + *stats = vdev->stats; + a0 = vdev->stats_pa; + a1 = sizeof(struct vnic_stats); + + return vnic_dev_cmd(vdev, CMD_STATS_DUMP, &a0, &a1, wait); +} + +int vnic_dev_close(struct vnic_dev *vdev) +{ + u64 a0 = 0, a1 = 0; + int wait = 1000; + return vnic_dev_cmd(vdev, CMD_CLOSE, &a0, &a1, wait); +} + +int vnic_dev_enable(struct vnic_dev *vdev) +{ + u64 a0 = 0, a1 = 0; + int wait = 1000; + return vnic_dev_cmd(vdev, CMD_ENABLE, &a0, &a1, wait); +} + +int vnic_dev_disable(struct vnic_dev *vdev) +{ + u64 a0 = 0, a1 = 0; + int wait = 1000; + return vnic_dev_cmd(vdev, CMD_DISABLE, &a0, &a1, wait); +} + +int vnic_dev_open(struct vnic_dev *vdev, int arg) +{ + u64 a0 = (u32)arg, a1 = 0; + int wait = 1000; + return vnic_dev_cmd(vdev, CMD_OPEN, &a0, &a1, wait); +} + +int vnic_dev_open_done(struct vnic_dev *vdev, int *done) +{ + u64 a0 = 0, a1 = 0; + int wait = 1000; + int err; + + *done = 0; + + err = vnic_dev_cmd(vdev, CMD_OPEN_STATUS, &a0, &a1, wait); + if (err) + return err; + + *done = (a0 == 0); + + return 0; +} + +int vnic_dev_soft_reset(struct vnic_dev *vdev, int arg) +{ + u64 a0 = (u32)arg, a1 = 0; + int wait = 1000; + return vnic_dev_cmd(vdev, CMD_SOFT_RESET, &a0, &a1, wait); +} + +int vnic_dev_soft_reset_done(struct vnic_dev *vdev, int *done) +{ + u64 a0 = 0, a1 = 0; + int wait = 1000; + int err; + + *done = 0; + + err = vnic_dev_cmd(vdev, CMD_SOFT_RESET_STATUS, &a0, &a1, wait); + if (err) + return err; + + *done = (a0 == 0); + + return 0; +} + +int vnic_dev_hang_notify(struct vnic_dev *vdev) +{ + u64 a0, a1; + int wait = 1000; + return vnic_dev_cmd(vdev, CMD_HANG_NOTIFY, &a0, &a1, wait); +} + +int vnic_dev_mac_addr(struct vnic_dev *vdev, u8 *mac_addr) +{ + u64 a0, a1; + int wait = 1000; + int err, i; + + for (i = 0; i < ETH_ALEN; i++) + mac_addr[i] = 0; + + err = vnic_dev_cmd(vdev, CMD_MAC_ADDR, &a0, &a1, wait); + if (err) + return err; + + for (i = 0; i < ETH_ALEN; i++) + mac_addr[i] = ((u8 *)&a0)[i]; + + return 0; +} + +void vnic_dev_packet_filter(struct vnic_dev *vdev, int directed, int multicast, + int broadcast, int promisc, int allmulti) +{ + u64 a0, a1 = 0; + int wait = 1000; + int err; + + a0 = (directed ? CMD_PFILTER_DIRECTED : 0) | + (multicast ? CMD_PFILTER_MULTICAST : 0) | + (broadcast ? CMD_PFILTER_BROADCAST : 0) | + (promisc ? CMD_PFILTER_PROMISCUOUS : 0) | + (allmulti ? CMD_PFILTER_ALL_MULTICAST : 0); + + err = vnic_dev_cmd(vdev, CMD_PACKET_FILTER, &a0, &a1, wait); + if (err) + printk(KERN_ERR "Can't set packet filter\n"); +} + +void vnic_dev_add_addr(struct vnic_dev *vdev, u8 *addr) +{ + u64 a0 = 0, a1 = 0; + int wait = 1000; + int err; + int i; + + for (i = 0; i < ETH_ALEN; i++) + ((u8 *)&a0)[i] = addr[i]; + + err = vnic_dev_cmd(vdev, CMD_ADDR_ADD, &a0, &a1, wait); + if (err) + printk(KERN_ERR + "Can't add addr [%02x:%02x:%02x:%02x:%02x:%02x], %d\n", + addr[0], addr[1], addr[2], addr[3], addr[4], addr[5], + err); +} + +void vnic_dev_del_addr(struct vnic_dev *vdev, u8 *addr) +{ + u64 a0 = 0, a1 = 0; + int wait = 1000; + int err; + int i; + + for (i = 0; i < ETH_ALEN; i++) + ((u8 *)&a0)[i] = addr[i]; + + err = vnic_dev_cmd(vdev, CMD_ADDR_DEL, &a0, &a1, wait); + if (err) + printk(KERN_ERR + "Can't del addr [%02x:%02x:%02x:%02x:%02x:%02x], %d\n", + addr[0], addr[1], addr[2], addr[3], addr[4], addr[5], + err); +} + +int vnic_dev_notify_set(struct vnic_dev *vdev, u16 intr) +{ + u64 a0, a1; + int wait = 1000; + + if (!vdev->notify) { + vdev->notify = pci_alloc_consistent(vdev->pdev, + sizeof(struct vnic_devcmd_notify), + &vdev->notify_pa); + if (!vdev->notify) + return -ENOMEM; + } + + a0 = vdev->notify_pa; + a1 = ((u64)intr << 32) & 0x0000ffff00000000ULL; + a1 += sizeof(struct vnic_devcmd_notify); + + return vnic_dev_cmd(vdev, CMD_NOTIFY, &a0, &a1, wait); +} + +void vnic_dev_notify_unset(struct vnic_dev *vdev) +{ + u64 a0, a1; + int wait = 1000; + + a0 = 0; /* paddr = 0 to unset notify buffer */ + a1 = 0x0000ffff00000000ULL; /* intr num = -1 to unreg for intr */ + a1 += sizeof(struct vnic_devcmd_notify); + + vnic_dev_cmd(vdev, CMD_NOTIFY, &a0, &a1, wait); +} + +static int vnic_dev_notify_ready(struct vnic_dev *vdev) +{ + u32 *words; + unsigned int nwords = sizeof(struct vnic_devcmd_notify) / 4; + unsigned int i; + u32 csum; + + if (!vdev->notify) + return 0; + + do { + csum = 0; + memcpy(&vdev->notify_copy, vdev->notify, + sizeof(struct vnic_devcmd_notify)); + words = (u32 *)&vdev->notify_copy; + for (i = 1; i < nwords; i++) + csum += words[i]; + } while (csum != words[0]); + + return 1; +} + +int vnic_dev_init(struct vnic_dev *vdev, int arg) +{ + u64 a0 = (u32)arg, a1 = 0; + int wait = 1000; + return vnic_dev_cmd(vdev, CMD_INIT, &a0, &a1, wait); +} + +int vnic_dev_link_status(struct vnic_dev *vdev) +{ + if (vdev->linkstatus) + return *vdev->linkstatus; + + if (!vnic_dev_notify_ready(vdev)) + return 0; + + return vdev->notify_copy.link_state; +} + +u32 vnic_dev_port_speed(struct vnic_dev *vdev) +{ + if (!vnic_dev_notify_ready(vdev)) + return 0; + + return vdev->notify_copy.port_speed; +} + +u32 vnic_dev_msg_lvl(struct vnic_dev *vdev) +{ + if (!vnic_dev_notify_ready(vdev)) + return 0; + + return vdev->notify_copy.msglvl; +} + +u32 vnic_dev_mtu(struct vnic_dev *vdev) +{ + if (!vnic_dev_notify_ready(vdev)) + return 0; + + return vdev->notify_copy.mtu; +} + +u32 vnic_dev_link_down_cnt(struct vnic_dev *vdev) +{ + if (!vnic_dev_notify_ready(vdev)) + return 0; + + return vdev->notify_copy.link_down_cnt; +} + +void vnic_dev_set_intr_mode(struct vnic_dev *vdev, + enum vnic_dev_intr_mode intr_mode) +{ + vdev->intr_mode = intr_mode; +} + +enum vnic_dev_intr_mode vnic_dev_get_intr_mode( + struct vnic_dev *vdev) +{ + return vdev->intr_mode; +} + +void vnic_dev_unregister(struct vnic_dev *vdev) +{ + if (vdev) { + if (vdev->notify) + pci_free_consistent(vdev->pdev, + sizeof(struct vnic_devcmd_notify), + vdev->notify, + vdev->notify_pa); + if (vdev->linkstatus) + pci_free_consistent(vdev->pdev, + sizeof(u32), + vdev->linkstatus, + vdev->linkstatus_pa); + if (vdev->stats) + pci_free_consistent(vdev->pdev, + sizeof(struct vnic_dev), + vdev->stats, vdev->stats_pa); + if (vdev->fw_info) + pci_free_consistent(vdev->pdev, + sizeof(struct vnic_devcmd_fw_info), + vdev->fw_info, vdev->fw_info_pa); + kfree(vdev); + } +} + +struct vnic_dev *vnic_dev_register(struct vnic_dev *vdev, + void *priv, struct pci_dev *pdev, struct vnic_dev_bar *bar) +{ + if (!vdev) { + vdev = kzalloc(sizeof(struct vnic_dev), GFP_KERNEL); + if (!vdev) + return NULL; + } + + vdev->priv = priv; + vdev->pdev = pdev; + + if (vnic_dev_discover_res(vdev, bar)) + goto err_out; + + vdev->devcmd = vnic_dev_get_res(vdev, RES_TYPE_DEVCMD, 0); + if (!vdev->devcmd) + goto err_out; + + return vdev; + +err_out: + vnic_dev_unregister(vdev); + return NULL; +} diff --git a/drivers/scsi/fnic/vnic_dev.h b/drivers/scsi/fnic/vnic_dev.h new file mode 100644 index 00000000000..f9935a8a5a0 --- /dev/null +++ b/drivers/scsi/fnic/vnic_dev.h @@ -0,0 +1,161 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef _VNIC_DEV_H_ +#define _VNIC_DEV_H_ + +#include "vnic_resource.h" +#include "vnic_devcmd.h" + +/* + * These defines avoid symbol clash between fnic and enic (Cisco 10G Eth + * Driver) when both are built with CONFIG options =y + */ +#define vnic_dev_priv fnic_dev_priv +#define vnic_dev_get_res_count fnic_dev_get_res_count +#define vnic_dev_get_res fnic_dev_get_res +#define vnic_dev_desc_ring_size fnic_dev_desc_ring_siz +#define vnic_dev_clear_desc_ring fnic_dev_clear_desc_ring +#define vnic_dev_alloc_desc_ring fnic_dev_alloc_desc_ring +#define vnic_dev_free_desc_ring fnic_dev_free_desc_ring +#define vnic_dev_cmd fnic_dev_cmd +#define vnic_dev_fw_info fnic_dev_fw_info +#define vnic_dev_spec fnic_dev_spec +#define vnic_dev_stats_clear fnic_dev_stats_clear +#define vnic_dev_stats_dump fnic_dev_stats_dump +#define vnic_dev_hang_notify fnic_dev_hang_notify +#define vnic_dev_packet_filter fnic_dev_packet_filter +#define vnic_dev_add_addr fnic_dev_add_addr +#define vnic_dev_del_addr fnic_dev_del_addr +#define vnic_dev_mac_addr fnic_dev_mac_addr +#define vnic_dev_notify_set fnic_dev_notify_set +#define vnic_dev_notify_unset fnic_dev_notify_unset +#define vnic_dev_link_status fnic_dev_link_status +#define vnic_dev_port_speed fnic_dev_port_speed +#define vnic_dev_msg_lvl fnic_dev_msg_lvl +#define vnic_dev_mtu fnic_dev_mtu +#define vnic_dev_link_down_cnt fnic_dev_link_down_cnt +#define vnic_dev_close fnic_dev_close +#define vnic_dev_enable fnic_dev_enable +#define vnic_dev_disable fnic_dev_disable +#define vnic_dev_open fnic_dev_open +#define vnic_dev_open_done fnic_dev_open_done +#define vnic_dev_init fnic_dev_init +#define vnic_dev_soft_reset fnic_dev_soft_reset +#define vnic_dev_soft_reset_done fnic_dev_soft_reset_done +#define vnic_dev_set_intr_mode fnic_dev_set_intr_mode +#define vnic_dev_get_intr_mode fnic_dev_get_intr_mode +#define vnic_dev_unregister fnic_dev_unregister +#define vnic_dev_register fnic_dev_register + +#ifndef VNIC_PADDR_TARGET +#define VNIC_PADDR_TARGET 0x0000000000000000ULL +#endif + +#ifndef readq +static inline u64 readq(void __iomem *reg) +{ + return ((u64)readl(reg + 0x4UL) << 32) | (u64)readl(reg); +} + +static inline void writeq(u64 val, void __iomem *reg) +{ + writel(val & 0xffffffff, reg); + writel(val >> 32, reg + 0x4UL); +} +#endif + +enum vnic_dev_intr_mode { + VNIC_DEV_INTR_MODE_UNKNOWN, + VNIC_DEV_INTR_MODE_INTX, + VNIC_DEV_INTR_MODE_MSI, + VNIC_DEV_INTR_MODE_MSIX, +}; + +struct vnic_dev_bar { + void __iomem *vaddr; + dma_addr_t bus_addr; + unsigned long len; +}; + +struct vnic_dev_ring { + void *descs; + size_t size; + dma_addr_t base_addr; + size_t base_align; + void *descs_unaligned; + size_t size_unaligned; + dma_addr_t base_addr_unaligned; + unsigned int desc_size; + unsigned int desc_count; + unsigned int desc_avail; +}; + +struct vnic_dev; +struct vnic_stats; + +void *vnic_dev_priv(struct vnic_dev *vdev); +unsigned int vnic_dev_get_res_count(struct vnic_dev *vdev, + enum vnic_res_type type); +void __iomem *vnic_dev_get_res(struct vnic_dev *vdev, enum vnic_res_type type, + unsigned int index); +unsigned int vnic_dev_desc_ring_size(struct vnic_dev_ring *ring, + unsigned int desc_count, + unsigned int desc_size); +void vnic_dev_clear_desc_ring(struct vnic_dev_ring *ring); +int vnic_dev_alloc_desc_ring(struct vnic_dev *vdev, struct vnic_dev_ring *ring, + unsigned int desc_count, unsigned int desc_size); +void vnic_dev_free_desc_ring(struct vnic_dev *vdev, + struct vnic_dev_ring *ring); +int vnic_dev_cmd(struct vnic_dev *vdev, enum vnic_devcmd_cmd cmd, + u64 *a0, u64 *a1, int wait); +int vnic_dev_fw_info(struct vnic_dev *vdev, + struct vnic_devcmd_fw_info **fw_info); +int vnic_dev_spec(struct vnic_dev *vdev, unsigned int offset, + unsigned int size, void *value); +int vnic_dev_stats_clear(struct vnic_dev *vdev); +int vnic_dev_stats_dump(struct vnic_dev *vdev, struct vnic_stats **stats); +int vnic_dev_hang_notify(struct vnic_dev *vdev); +void vnic_dev_packet_filter(struct vnic_dev *vdev, int directed, int multicast, + int broadcast, int promisc, int allmulti); +void vnic_dev_add_addr(struct vnic_dev *vdev, u8 *addr); +void vnic_dev_del_addr(struct vnic_dev *vdev, u8 *addr); +int vnic_dev_mac_addr(struct vnic_dev *vdev, u8 *mac_addr); +int vnic_dev_notify_set(struct vnic_dev *vdev, u16 intr); +void vnic_dev_notify_unset(struct vnic_dev *vdev); +int vnic_dev_link_status(struct vnic_dev *vdev); +u32 vnic_dev_port_speed(struct vnic_dev *vdev); +u32 vnic_dev_msg_lvl(struct vnic_dev *vdev); +u32 vnic_dev_mtu(struct vnic_dev *vdev); +u32 vnic_dev_link_down_cnt(struct vnic_dev *vdev); +int vnic_dev_close(struct vnic_dev *vdev); +int vnic_dev_enable(struct vnic_dev *vdev); +int vnic_dev_disable(struct vnic_dev *vdev); +int vnic_dev_open(struct vnic_dev *vdev, int arg); +int vnic_dev_open_done(struct vnic_dev *vdev, int *done); +int vnic_dev_init(struct vnic_dev *vdev, int arg); +int vnic_dev_soft_reset(struct vnic_dev *vdev, int arg); +int vnic_dev_soft_reset_done(struct vnic_dev *vdev, int *done); +void vnic_dev_set_intr_mode(struct vnic_dev *vdev, + enum vnic_dev_intr_mode intr_mode); +enum vnic_dev_intr_mode vnic_dev_get_intr_mode(struct vnic_dev *vdev); +void vnic_dev_unregister(struct vnic_dev *vdev); +struct vnic_dev *vnic_dev_register(struct vnic_dev *vdev, + void *priv, struct pci_dev *pdev, + struct vnic_dev_bar *bar); + +#endif /* _VNIC_DEV_H_ */ diff --git a/drivers/scsi/fnic/vnic_devcmd.h b/drivers/scsi/fnic/vnic_devcmd.h new file mode 100644 index 00000000000..d62b9061bf1 --- /dev/null +++ b/drivers/scsi/fnic/vnic_devcmd.h @@ -0,0 +1,281 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef _VNIC_DEVCMD_H_ +#define _VNIC_DEVCMD_H_ + +#define _CMD_NBITS 14 +#define _CMD_VTYPEBITS 10 +#define _CMD_FLAGSBITS 6 +#define _CMD_DIRBITS 2 + +#define _CMD_NMASK ((1 << _CMD_NBITS)-1) +#define _CMD_VTYPEMASK ((1 << _CMD_VTYPEBITS)-1) +#define _CMD_FLAGSMASK ((1 << _CMD_FLAGSBITS)-1) +#define _CMD_DIRMASK ((1 << _CMD_DIRBITS)-1) + +#define _CMD_NSHIFT 0 +#define _CMD_VTYPESHIFT (_CMD_NSHIFT+_CMD_NBITS) +#define _CMD_FLAGSSHIFT (_CMD_VTYPESHIFT+_CMD_VTYPEBITS) +#define _CMD_DIRSHIFT (_CMD_FLAGSSHIFT+_CMD_FLAGSBITS) + +/* + * Direction bits (from host perspective). + */ +#define _CMD_DIR_NONE 0U +#define _CMD_DIR_WRITE 1U +#define _CMD_DIR_READ 2U +#define _CMD_DIR_RW (_CMD_DIR_WRITE | _CMD_DIR_READ) + +/* + * Flag bits. + */ +#define _CMD_FLAGS_NONE 0U +#define _CMD_FLAGS_NOWAIT 1U + +/* + * vNIC type bits. + */ +#define _CMD_VTYPE_NONE 0U +#define _CMD_VTYPE_ENET 1U +#define _CMD_VTYPE_FC 2U +#define _CMD_VTYPE_SCSI 4U +#define _CMD_VTYPE_ALL (_CMD_VTYPE_ENET | _CMD_VTYPE_FC | _CMD_VTYPE_SCSI) + +/* + * Used to create cmds.. +*/ +#define _CMDCF(dir, flags, vtype, nr) \ + (((dir) << _CMD_DIRSHIFT) | \ + ((flags) << _CMD_FLAGSSHIFT) | \ + ((vtype) << _CMD_VTYPESHIFT) | \ + ((nr) << _CMD_NSHIFT)) +#define _CMDC(dir, vtype, nr) _CMDCF(dir, 0, vtype, nr) +#define _CMDCNW(dir, vtype, nr) _CMDCF(dir, _CMD_FLAGS_NOWAIT, vtype, nr) + +/* + * Used to decode cmds.. +*/ +#define _CMD_DIR(cmd) (((cmd) >> _CMD_DIRSHIFT) & _CMD_DIRMASK) +#define _CMD_FLAGS(cmd) (((cmd) >> _CMD_FLAGSSHIFT) & _CMD_FLAGSMASK) +#define _CMD_VTYPE(cmd) (((cmd) >> _CMD_VTYPESHIFT) & _CMD_VTYPEMASK) +#define _CMD_N(cmd) (((cmd) >> _CMD_NSHIFT) & _CMD_NMASK) + +enum vnic_devcmd_cmd { + CMD_NONE = _CMDC(_CMD_DIR_NONE, _CMD_VTYPE_NONE, 0), + + /* mcpu fw info in mem: (u64)a0=paddr to struct vnic_devcmd_fw_info */ + CMD_MCPU_FW_INFO = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 1), + + /* dev-specific block member: + * in: (u16)a0=offset,(u8)a1=size + * out: a0=value */ + CMD_DEV_SPEC = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 2), + + /* stats clear */ + CMD_STATS_CLEAR = _CMDCNW(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 3), + + /* stats dump in mem: (u64)a0=paddr to stats area, + * (u16)a1=sizeof stats area */ + CMD_STATS_DUMP = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 4), + + /* set Rx packet filter: (u32)a0=filters (see CMD_PFILTER_*) */ + CMD_PACKET_FILTER = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 7), + + /* hang detection notification */ + CMD_HANG_NOTIFY = _CMDC(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 8), + + /* MAC address in (u48)a0 */ + CMD_MAC_ADDR = _CMDC(_CMD_DIR_READ, + _CMD_VTYPE_ENET | _CMD_VTYPE_FC, 9), + + /* disable/enable promisc mode: (u8)a0=0/1 */ +/***** XXX DEPRECATED *****/ + CMD_PROMISC_MODE = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 10), + + /* disable/enable all-multi mode: (u8)a0=0/1 */ +/***** XXX DEPRECATED *****/ + CMD_ALLMULTI_MODE = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 11), + + /* add addr from (u48)a0 */ + CMD_ADDR_ADD = _CMDCNW(_CMD_DIR_WRITE, + _CMD_VTYPE_ENET | _CMD_VTYPE_FC, 12), + + /* del addr from (u48)a0 */ + CMD_ADDR_DEL = _CMDCNW(_CMD_DIR_WRITE, + _CMD_VTYPE_ENET | _CMD_VTYPE_FC, 13), + + /* add VLAN id in (u16)a0 */ + CMD_VLAN_ADD = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 14), + + /* del VLAN id in (u16)a0 */ + CMD_VLAN_DEL = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 15), + + /* nic_cfg in (u32)a0 */ + CMD_NIC_CFG = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 16), + + /* union vnic_rss_key in mem: (u64)a0=paddr, (u16)a1=len */ + CMD_RSS_KEY = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 17), + + /* union vnic_rss_cpu in mem: (u64)a0=paddr, (u16)a1=len */ + CMD_RSS_CPU = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 18), + + /* initiate softreset */ + CMD_SOFT_RESET = _CMDCNW(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 19), + + /* softreset status: + * out: a0=0 reset complete, a0=1 reset in progress */ + CMD_SOFT_RESET_STATUS = _CMDC(_CMD_DIR_READ, _CMD_VTYPE_ALL, 20), + + /* set struct vnic_devcmd_notify buffer in mem: + * in: + * (u64)a0=paddr to notify (set paddr=0 to unset) + * (u32)a1 & 0x00000000ffffffff=sizeof(struct vnic_devcmd_notify) + * (u16)a1 & 0x0000ffff00000000=intr num (-1 for no intr) + * out: + * (u32)a1 = effective size + */ + CMD_NOTIFY = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 21), + + /* UNDI API: (u64)a0=paddr to s_PXENV_UNDI_ struct, + * (u8)a1=PXENV_UNDI_xxx */ + CMD_UNDI = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 22), + + /* initiate open sequence (u32)a0=flags (see CMD_OPENF_*) */ + CMD_OPEN = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 23), + + /* open status: + * out: a0=0 open complete, a0=1 open in progress */ + CMD_OPEN_STATUS = _CMDC(_CMD_DIR_READ, _CMD_VTYPE_ALL, 24), + + /* close vnic */ + CMD_CLOSE = _CMDC(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 25), + + /* initialize virtual link: (u32)a0=flags (see CMD_INITF_*) */ + CMD_INIT = _CMDCNW(_CMD_DIR_READ, _CMD_VTYPE_ALL, 26), + + /* variant of CMD_INIT, with provisioning info + * (u64)a0=paddr of vnic_devcmd_provinfo + * (u32)a1=sizeof provision info */ + CMD_INIT_PROV_INFO = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 27), + + /* enable virtual link */ + CMD_ENABLE = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 28), + + /* disable virtual link */ + CMD_DISABLE = _CMDC(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 29), + + /* stats dump all vnics on uplink in mem: (u64)a0=paddr (u32)a1=uif */ + CMD_STATS_DUMP_ALL = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 30), + + /* init status: + * out: a0=0 init complete, a0=1 init in progress + * if a0=0, a1=errno */ + CMD_INIT_STATUS = _CMDC(_CMD_DIR_READ, _CMD_VTYPE_ALL, 31), + + /* INT13 API: (u64)a0=paddr to vnic_int13_params struct + * (u8)a1=INT13_CMD_xxx */ + CMD_INT13 = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_FC, 32), + + /* logical uplink enable/disable: (u64)a0: 0/1=disable/enable */ + CMD_LOGICAL_UPLINK = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 33), + + /* undo initialize of virtual link */ + CMD_DEINIT = _CMDCNW(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 34), +}; + +/* flags for CMD_OPEN */ +#define CMD_OPENF_OPROM 0x1 /* open coming from option rom */ + +/* flags for CMD_INIT */ +#define CMD_INITF_DEFAULT_MAC 0x1 /* init with default mac addr */ + +/* flags for CMD_PACKET_FILTER */ +#define CMD_PFILTER_DIRECTED 0x01 +#define CMD_PFILTER_MULTICAST 0x02 +#define CMD_PFILTER_BROADCAST 0x04 +#define CMD_PFILTER_PROMISCUOUS 0x08 +#define CMD_PFILTER_ALL_MULTICAST 0x10 + +enum vnic_devcmd_status { + STAT_NONE = 0, + STAT_BUSY = 1 << 0, /* cmd in progress */ + STAT_ERROR = 1 << 1, /* last cmd caused error (code in a0) */ +}; + +enum vnic_devcmd_error { + ERR_SUCCESS = 0, + ERR_EINVAL = 1, + ERR_EFAULT = 2, + ERR_EPERM = 3, + ERR_EBUSY = 4, + ERR_ECMDUNKNOWN = 5, + ERR_EBADSTATE = 6, + ERR_ENOMEM = 7, + ERR_ETIMEDOUT = 8, + ERR_ELINKDOWN = 9, +}; + +struct vnic_devcmd_fw_info { + char fw_version[32]; + char fw_build[32]; + char hw_version[32]; + char hw_serial_number[32]; +}; + +struct vnic_devcmd_notify { + u32 csum; /* checksum over following words */ + + u32 link_state; /* link up == 1 */ + u32 port_speed; /* effective port speed (rate limit) */ + u32 mtu; /* MTU */ + u32 msglvl; /* requested driver msg lvl */ + u32 uif; /* uplink interface */ + u32 status; /* status bits (see VNIC_STF_*) */ + u32 error; /* error code (see ERR_*) for first ERR */ + u32 link_down_cnt; /* running count of link down transitions */ +}; +#define VNIC_STF_FATAL_ERR 0x0001 /* fatal fw error */ + +struct vnic_devcmd_provinfo { + u8 oui[3]; + u8 type; + u8 data[0]; +}; + +/* + * Writing cmd register causes STAT_BUSY to get set in status register. + * When cmd completes, STAT_BUSY will be cleared. + * + * If cmd completed successfully STAT_ERROR will be clear + * and args registers contain cmd-specific results. + * + * If cmd error, STAT_ERROR will be set and args[0] contains error code. + * + * status register is read-only. While STAT_BUSY is set, + * all other register contents are read-only. + */ + +/* Make sizeof(vnic_devcmd) a power-of-2 for I/O BAR. */ +#define VNIC_DEVCMD_NARGS 15 +struct vnic_devcmd { + u32 status; /* RO */ + u32 cmd; /* RW */ + u64 args[VNIC_DEVCMD_NARGS]; /* RW cmd args (little-endian) */ +}; + +#endif /* _VNIC_DEVCMD_H_ */ diff --git a/drivers/scsi/fnic/vnic_intr.c b/drivers/scsi/fnic/vnic_intr.c new file mode 100644 index 00000000000..4f4dc8793d2 --- /dev/null +++ b/drivers/scsi/fnic/vnic_intr.c @@ -0,0 +1,60 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#include +#include +#include +#include +#include +#include "vnic_dev.h" +#include "vnic_intr.h" + +void vnic_intr_free(struct vnic_intr *intr) +{ + intr->ctrl = NULL; +} + +int vnic_intr_alloc(struct vnic_dev *vdev, struct vnic_intr *intr, + unsigned int index) +{ + intr->index = index; + intr->vdev = vdev; + + intr->ctrl = vnic_dev_get_res(vdev, RES_TYPE_INTR_CTRL, index); + if (!intr->ctrl) { + printk(KERN_ERR "Failed to hook INTR[%d].ctrl resource\n", + index); + return -EINVAL; + } + + return 0; +} + +void vnic_intr_init(struct vnic_intr *intr, unsigned int coalescing_timer, + unsigned int coalescing_type, unsigned int mask_on_assertion) +{ + iowrite32(coalescing_timer, &intr->ctrl->coalescing_timer); + iowrite32(coalescing_type, &intr->ctrl->coalescing_type); + iowrite32(mask_on_assertion, &intr->ctrl->mask_on_assertion); + iowrite32(0, &intr->ctrl->int_credits); +} + +void vnic_intr_clean(struct vnic_intr *intr) +{ + iowrite32(0, &intr->ctrl->int_credits); +} diff --git a/drivers/scsi/fnic/vnic_intr.h b/drivers/scsi/fnic/vnic_intr.h new file mode 100644 index 00000000000..d5fb40e7c98 --- /dev/null +++ b/drivers/scsi/fnic/vnic_intr.h @@ -0,0 +1,118 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef _VNIC_INTR_H_ +#define _VNIC_INTR_H_ + +#include +#include "vnic_dev.h" + +/* + * These defines avoid symbol clash between fnic and enic (Cisco 10G Eth + * Driver) when both are built with CONFIG options =y + */ +#define vnic_intr_unmask fnic_intr_unmask +#define vnic_intr_mask fnic_intr_mask +#define vnic_intr_return_credits fnic_intr_return_credits +#define vnic_intr_credits fnic_intr_credits +#define vnic_intr_return_all_credits fnic_intr_return_all_credits +#define vnic_intr_legacy_pba fnic_intr_legacy_pba +#define vnic_intr_free fnic_intr_free +#define vnic_intr_alloc fnic_intr_alloc +#define vnic_intr_init fnic_intr_init +#define vnic_intr_clean fnic_intr_clean + +#define VNIC_INTR_TIMER_MAX 0xffff + +#define VNIC_INTR_TIMER_TYPE_ABS 0 +#define VNIC_INTR_TIMER_TYPE_QUIET 1 + +/* Interrupt control */ +struct vnic_intr_ctrl { + u32 coalescing_timer; /* 0x00 */ + u32 pad0; + u32 coalescing_value; /* 0x08 */ + u32 pad1; + u32 coalescing_type; /* 0x10 */ + u32 pad2; + u32 mask_on_assertion; /* 0x18 */ + u32 pad3; + u32 mask; /* 0x20 */ + u32 pad4; + u32 int_credits; /* 0x28 */ + u32 pad5; + u32 int_credit_return; /* 0x30 */ + u32 pad6; +}; + +struct vnic_intr { + unsigned int index; + struct vnic_dev *vdev; + struct vnic_intr_ctrl __iomem *ctrl; /* memory-mapped */ +}; + +static inline void vnic_intr_unmask(struct vnic_intr *intr) +{ + iowrite32(0, &intr->ctrl->mask); +} + +static inline void vnic_intr_mask(struct vnic_intr *intr) +{ + iowrite32(1, &intr->ctrl->mask); +} + +static inline void vnic_intr_return_credits(struct vnic_intr *intr, + unsigned int credits, int unmask, int reset_timer) +{ +#define VNIC_INTR_UNMASK_SHIFT 16 +#define VNIC_INTR_RESET_TIMER_SHIFT 17 + + u32 int_credit_return = (credits & 0xffff) | + (unmask ? (1 << VNIC_INTR_UNMASK_SHIFT) : 0) | + (reset_timer ? (1 << VNIC_INTR_RESET_TIMER_SHIFT) : 0); + + iowrite32(int_credit_return, &intr->ctrl->int_credit_return); +} + +static inline unsigned int vnic_intr_credits(struct vnic_intr *intr) +{ + return ioread32(&intr->ctrl->int_credits); +} + +static inline void vnic_intr_return_all_credits(struct vnic_intr *intr) +{ + unsigned int credits = vnic_intr_credits(intr); + int unmask = 1; + int reset_timer = 1; + + vnic_intr_return_credits(intr, credits, unmask, reset_timer); +} + +static inline u32 vnic_intr_legacy_pba(u32 __iomem *legacy_pba) +{ + /* read PBA without clearing */ + return ioread32(legacy_pba); +} + +void vnic_intr_free(struct vnic_intr *intr); +int vnic_intr_alloc(struct vnic_dev *vdev, struct vnic_intr *intr, + unsigned int index); +void vnic_intr_init(struct vnic_intr *intr, unsigned int coalescing_timer, + unsigned int coalescing_type, unsigned int mask_on_assertion); +void vnic_intr_clean(struct vnic_intr *intr); + +#endif /* _VNIC_INTR_H_ */ diff --git a/drivers/scsi/fnic/vnic_nic.h b/drivers/scsi/fnic/vnic_nic.h new file mode 100644 index 00000000000..f15b83eeace --- /dev/null +++ b/drivers/scsi/fnic/vnic_nic.h @@ -0,0 +1,69 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef _VNIC_NIC_H_ +#define _VNIC_NIC_H_ + +/* + * These defines avoid symbol clash between fnic and enic (Cisco 10G Eth + * Driver) when both are built with CONFIG options =y + */ +#define vnic_set_nic_cfg fnic_set_nic_cfg + +#define NIC_CFG_RSS_DEFAULT_CPU_MASK_FIELD 0xffUL +#define NIC_CFG_RSS_DEFAULT_CPU_SHIFT 0 +#define NIC_CFG_RSS_HASH_TYPE (0xffUL << 8) +#define NIC_CFG_RSS_HASH_TYPE_MASK_FIELD 0xffUL +#define NIC_CFG_RSS_HASH_TYPE_SHIFT 8 +#define NIC_CFG_RSS_HASH_BITS (7UL << 16) +#define NIC_CFG_RSS_HASH_BITS_MASK_FIELD 7UL +#define NIC_CFG_RSS_HASH_BITS_SHIFT 16 +#define NIC_CFG_RSS_BASE_CPU (7UL << 19) +#define NIC_CFG_RSS_BASE_CPU_MASK_FIELD 7UL +#define NIC_CFG_RSS_BASE_CPU_SHIFT 19 +#define NIC_CFG_RSS_ENABLE (1UL << 22) +#define NIC_CFG_RSS_ENABLE_MASK_FIELD 1UL +#define NIC_CFG_RSS_ENABLE_SHIFT 22 +#define NIC_CFG_TSO_IPID_SPLIT_EN (1UL << 23) +#define NIC_CFG_TSO_IPID_SPLIT_EN_MASK_FIELD 1UL +#define NIC_CFG_TSO_IPID_SPLIT_EN_SHIFT 23 +#define NIC_CFG_IG_VLAN_STRIP_EN (1UL << 24) +#define NIC_CFG_IG_VLAN_STRIP_EN_MASK_FIELD 1UL +#define NIC_CFG_IG_VLAN_STRIP_EN_SHIFT 24 + +static inline void vnic_set_nic_cfg(u32 *nic_cfg, + u8 rss_default_cpu, u8 rss_hash_type, + u8 rss_hash_bits, u8 rss_base_cpu, + u8 rss_enable, u8 tso_ipid_split_en, + u8 ig_vlan_strip_en) +{ + *nic_cfg = (rss_default_cpu & NIC_CFG_RSS_DEFAULT_CPU_MASK_FIELD) | + ((rss_hash_type & NIC_CFG_RSS_HASH_TYPE_MASK_FIELD) + << NIC_CFG_RSS_HASH_TYPE_SHIFT) | + ((rss_hash_bits & NIC_CFG_RSS_HASH_BITS_MASK_FIELD) + << NIC_CFG_RSS_HASH_BITS_SHIFT) | + ((rss_base_cpu & NIC_CFG_RSS_BASE_CPU_MASK_FIELD) + << NIC_CFG_RSS_BASE_CPU_SHIFT) | + ((rss_enable & NIC_CFG_RSS_ENABLE_MASK_FIELD) + << NIC_CFG_RSS_ENABLE_SHIFT) | + ((tso_ipid_split_en & NIC_CFG_TSO_IPID_SPLIT_EN_MASK_FIELD) + << NIC_CFG_TSO_IPID_SPLIT_EN_SHIFT) | + ((ig_vlan_strip_en & NIC_CFG_IG_VLAN_STRIP_EN_MASK_FIELD) + << NIC_CFG_IG_VLAN_STRIP_EN_SHIFT); +} + +#endif /* _VNIC_NIC_H_ */ diff --git a/drivers/scsi/fnic/vnic_resource.h b/drivers/scsi/fnic/vnic_resource.h new file mode 100644 index 00000000000..2d842f79d41 --- /dev/null +++ b/drivers/scsi/fnic/vnic_resource.h @@ -0,0 +1,61 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef _VNIC_RESOURCE_H_ +#define _VNIC_RESOURCE_H_ + +#define VNIC_RES_MAGIC 0x766E6963L /* 'vnic' */ +#define VNIC_RES_VERSION 0x00000000L + +/* vNIC resource types */ +enum vnic_res_type { + RES_TYPE_EOL, /* End-of-list */ + RES_TYPE_WQ, /* Work queues */ + RES_TYPE_RQ, /* Receive queues */ + RES_TYPE_CQ, /* Completion queues */ + RES_TYPE_RSVD1, + RES_TYPE_NIC_CFG, /* Enet NIC config registers */ + RES_TYPE_RSVD2, + RES_TYPE_RSVD3, + RES_TYPE_RSVD4, + RES_TYPE_RSVD5, + RES_TYPE_INTR_CTRL, /* Interrupt ctrl table */ + RES_TYPE_INTR_TABLE, /* MSI/MSI-X Interrupt table */ + RES_TYPE_INTR_PBA, /* MSI/MSI-X PBA table */ + RES_TYPE_INTR_PBA_LEGACY, /* Legacy intr status */ + RES_TYPE_RSVD6, + RES_TYPE_RSVD7, + RES_TYPE_DEVCMD, /* Device command region */ + RES_TYPE_PASS_THRU_PAGE, /* Pass-thru page */ + + RES_TYPE_MAX, /* Count of resource types */ +}; + +struct vnic_resource_header { + u32 magic; + u32 version; +}; + +struct vnic_resource { + u8 type; + u8 bar; + u8 pad[2]; + u32 bar_offset; + u32 count; +}; + +#endif /* _VNIC_RESOURCE_H_ */ diff --git a/drivers/scsi/fnic/vnic_rq.c b/drivers/scsi/fnic/vnic_rq.c new file mode 100644 index 00000000000..bedd0d28563 --- /dev/null +++ b/drivers/scsi/fnic/vnic_rq.c @@ -0,0 +1,196 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#include +#include +#include +#include +#include "vnic_dev.h" +#include "vnic_rq.h" + +static int vnic_rq_alloc_bufs(struct vnic_rq *rq) +{ + struct vnic_rq_buf *buf; + struct vnic_dev *vdev; + unsigned int i, j, count = rq->ring.desc_count; + unsigned int blks = VNIC_RQ_BUF_BLKS_NEEDED(count); + + vdev = rq->vdev; + + for (i = 0; i < blks; i++) { + rq->bufs[i] = kzalloc(VNIC_RQ_BUF_BLK_SZ, GFP_ATOMIC); + if (!rq->bufs[i]) { + printk(KERN_ERR "Failed to alloc rq_bufs\n"); + return -ENOMEM; + } + } + + for (i = 0; i < blks; i++) { + buf = rq->bufs[i]; + for (j = 0; j < VNIC_RQ_BUF_BLK_ENTRIES; j++) { + buf->index = i * VNIC_RQ_BUF_BLK_ENTRIES + j; + buf->desc = (u8 *)rq->ring.descs + + rq->ring.desc_size * buf->index; + if (buf->index + 1 == count) { + buf->next = rq->bufs[0]; + break; + } else if (j + 1 == VNIC_RQ_BUF_BLK_ENTRIES) { + buf->next = rq->bufs[i + 1]; + } else { + buf->next = buf + 1; + buf++; + } + } + } + + rq->to_use = rq->to_clean = rq->bufs[0]; + rq->buf_index = 0; + + return 0; +} + +void vnic_rq_free(struct vnic_rq *rq) +{ + struct vnic_dev *vdev; + unsigned int i; + + vdev = rq->vdev; + + vnic_dev_free_desc_ring(vdev, &rq->ring); + + for (i = 0; i < VNIC_RQ_BUF_BLKS_MAX; i++) { + kfree(rq->bufs[i]); + rq->bufs[i] = NULL; + } + + rq->ctrl = NULL; +} + +int vnic_rq_alloc(struct vnic_dev *vdev, struct vnic_rq *rq, unsigned int index, + unsigned int desc_count, unsigned int desc_size) +{ + int err; + + rq->index = index; + rq->vdev = vdev; + + rq->ctrl = vnic_dev_get_res(vdev, RES_TYPE_RQ, index); + if (!rq->ctrl) { + printk(KERN_ERR "Failed to hook RQ[%d] resource\n", index); + return -EINVAL; + } + + vnic_rq_disable(rq); + + err = vnic_dev_alloc_desc_ring(vdev, &rq->ring, desc_count, desc_size); + if (err) + return err; + + err = vnic_rq_alloc_bufs(rq); + if (err) { + vnic_rq_free(rq); + return err; + } + + return 0; +} + +void vnic_rq_init(struct vnic_rq *rq, unsigned int cq_index, + unsigned int error_interrupt_enable, + unsigned int error_interrupt_offset) +{ + u64 paddr; + u32 fetch_index; + + paddr = (u64)rq->ring.base_addr | VNIC_PADDR_TARGET; + writeq(paddr, &rq->ctrl->ring_base); + iowrite32(rq->ring.desc_count, &rq->ctrl->ring_size); + iowrite32(cq_index, &rq->ctrl->cq_index); + iowrite32(error_interrupt_enable, &rq->ctrl->error_interrupt_enable); + iowrite32(error_interrupt_offset, &rq->ctrl->error_interrupt_offset); + iowrite32(0, &rq->ctrl->dropped_packet_count); + iowrite32(0, &rq->ctrl->error_status); + + /* Use current fetch_index as the ring starting point */ + fetch_index = ioread32(&rq->ctrl->fetch_index); + rq->to_use = rq->to_clean = + &rq->bufs[fetch_index / VNIC_RQ_BUF_BLK_ENTRIES] + [fetch_index % VNIC_RQ_BUF_BLK_ENTRIES]; + iowrite32(fetch_index, &rq->ctrl->posted_index); + + rq->buf_index = 0; +} + +unsigned int vnic_rq_error_status(struct vnic_rq *rq) +{ + return ioread32(&rq->ctrl->error_status); +} + +void vnic_rq_enable(struct vnic_rq *rq) +{ + iowrite32(1, &rq->ctrl->enable); +} + +int vnic_rq_disable(struct vnic_rq *rq) +{ + unsigned int wait; + + iowrite32(0, &rq->ctrl->enable); + + /* Wait for HW to ACK disable request */ + for (wait = 0; wait < 100; wait++) { + if (!(ioread32(&rq->ctrl->running))) + return 0; + udelay(1); + } + + printk(KERN_ERR "Failed to disable RQ[%d]\n", rq->index); + + return -ETIMEDOUT; +} + +void vnic_rq_clean(struct vnic_rq *rq, + void (*buf_clean)(struct vnic_rq *rq, struct vnic_rq_buf *buf)) +{ + struct vnic_rq_buf *buf; + u32 fetch_index; + + BUG_ON(ioread32(&rq->ctrl->enable)); + + buf = rq->to_clean; + + while (vnic_rq_desc_used(rq) > 0) { + + (*buf_clean)(rq, buf); + + buf = rq->to_clean = buf->next; + rq->ring.desc_avail++; + } + + /* Use current fetch_index as the ring starting point */ + fetch_index = ioread32(&rq->ctrl->fetch_index); + rq->to_use = rq->to_clean = + &rq->bufs[fetch_index / VNIC_RQ_BUF_BLK_ENTRIES] + [fetch_index % VNIC_RQ_BUF_BLK_ENTRIES]; + iowrite32(fetch_index, &rq->ctrl->posted_index); + + rq->buf_index = 0; + + vnic_dev_clear_desc_ring(&rq->ring); +} + diff --git a/drivers/scsi/fnic/vnic_rq.h b/drivers/scsi/fnic/vnic_rq.h new file mode 100644 index 00000000000..aebdfbd6ad3 --- /dev/null +++ b/drivers/scsi/fnic/vnic_rq.h @@ -0,0 +1,235 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef _VNIC_RQ_H_ +#define _VNIC_RQ_H_ + +#include +#include "vnic_dev.h" +#include "vnic_cq.h" + +/* + * These defines avoid symbol clash between fnic and enic (Cisco 10G Eth + * Driver) when both are built with CONFIG options =y + */ +#define vnic_rq_desc_avail fnic_rq_desc_avail +#define vnic_rq_desc_used fnic_rq_desc_used +#define vnic_rq_next_desc fnic_rq_next_desc +#define vnic_rq_next_index fnic_rq_next_index +#define vnic_rq_next_buf_index fnic_rq_next_buf_index +#define vnic_rq_post fnic_rq_post +#define vnic_rq_posting_soon fnic_rq_posting_soon +#define vnic_rq_return_descs fnic_rq_return_descs +#define vnic_rq_service fnic_rq_service +#define vnic_rq_fill fnic_rq_fill +#define vnic_rq_free fnic_rq_free +#define vnic_rq_alloc fnic_rq_alloc +#define vnic_rq_init fnic_rq_init +#define vnic_rq_error_status fnic_rq_error_status +#define vnic_rq_enable fnic_rq_enable +#define vnic_rq_disable fnic_rq_disable +#define vnic_rq_clean fnic_rq_clean + +/* Receive queue control */ +struct vnic_rq_ctrl { + u64 ring_base; /* 0x00 */ + u32 ring_size; /* 0x08 */ + u32 pad0; + u32 posted_index; /* 0x10 */ + u32 pad1; + u32 cq_index; /* 0x18 */ + u32 pad2; + u32 enable; /* 0x20 */ + u32 pad3; + u32 running; /* 0x28 */ + u32 pad4; + u32 fetch_index; /* 0x30 */ + u32 pad5; + u32 error_interrupt_enable; /* 0x38 */ + u32 pad6; + u32 error_interrupt_offset; /* 0x40 */ + u32 pad7; + u32 error_status; /* 0x48 */ + u32 pad8; + u32 dropped_packet_count; /* 0x50 */ + u32 pad9; + u32 dropped_packet_count_rc; /* 0x58 */ + u32 pad10; +}; + +/* Break the vnic_rq_buf allocations into blocks of 64 entries */ +#define VNIC_RQ_BUF_BLK_ENTRIES 64 +#define VNIC_RQ_BUF_BLK_SZ \ + (VNIC_RQ_BUF_BLK_ENTRIES * sizeof(struct vnic_rq_buf)) +#define VNIC_RQ_BUF_BLKS_NEEDED(entries) \ + DIV_ROUND_UP(entries, VNIC_RQ_BUF_BLK_ENTRIES) +#define VNIC_RQ_BUF_BLKS_MAX VNIC_RQ_BUF_BLKS_NEEDED(4096) + +struct vnic_rq_buf { + struct vnic_rq_buf *next; + dma_addr_t dma_addr; + void *os_buf; + unsigned int os_buf_index; + unsigned int len; + unsigned int index; + void *desc; +}; + +struct vnic_rq { + unsigned int index; + struct vnic_dev *vdev; + struct vnic_rq_ctrl __iomem *ctrl; /* memory-mapped */ + struct vnic_dev_ring ring; + struct vnic_rq_buf *bufs[VNIC_RQ_BUF_BLKS_MAX]; + struct vnic_rq_buf *to_use; + struct vnic_rq_buf *to_clean; + void *os_buf_head; + unsigned int buf_index; + unsigned int pkts_outstanding; +}; + +static inline unsigned int vnic_rq_desc_avail(struct vnic_rq *rq) +{ + /* how many does SW own? */ + return rq->ring.desc_avail; +} + +static inline unsigned int vnic_rq_desc_used(struct vnic_rq *rq) +{ + /* how many does HW own? */ + return rq->ring.desc_count - rq->ring.desc_avail - 1; +} + +static inline void *vnic_rq_next_desc(struct vnic_rq *rq) +{ + return rq->to_use->desc; +} + +static inline unsigned int vnic_rq_next_index(struct vnic_rq *rq) +{ + return rq->to_use->index; +} + +static inline unsigned int vnic_rq_next_buf_index(struct vnic_rq *rq) +{ + return rq->buf_index++; +} + +static inline void vnic_rq_post(struct vnic_rq *rq, + void *os_buf, unsigned int os_buf_index, + dma_addr_t dma_addr, unsigned int len) +{ + struct vnic_rq_buf *buf = rq->to_use; + + buf->os_buf = os_buf; + buf->os_buf_index = os_buf_index; + buf->dma_addr = dma_addr; + buf->len = len; + + buf = buf->next; + rq->to_use = buf; + rq->ring.desc_avail--; + + /* Move the posted_index every nth descriptor + */ + +#ifndef VNIC_RQ_RETURN_RATE +#define VNIC_RQ_RETURN_RATE 0xf /* keep 2^n - 1 */ +#endif + + if ((buf->index & VNIC_RQ_RETURN_RATE) == 0) { + /* Adding write memory barrier prevents compiler and/or CPU + * reordering, thus avoiding descriptor posting before + * descriptor is initialized. Otherwise, hardware can read + * stale descriptor fields. + */ + wmb(); + iowrite32(buf->index, &rq->ctrl->posted_index); + } +} + +static inline int vnic_rq_posting_soon(struct vnic_rq *rq) +{ + return (rq->to_use->index & VNIC_RQ_RETURN_RATE) == 0; +} + +static inline void vnic_rq_return_descs(struct vnic_rq *rq, unsigned int count) +{ + rq->ring.desc_avail += count; +} + +enum desc_return_options { + VNIC_RQ_RETURN_DESC, + VNIC_RQ_DEFER_RETURN_DESC, +}; + +static inline void vnic_rq_service(struct vnic_rq *rq, + struct cq_desc *cq_desc, u16 completed_index, + int desc_return, void (*buf_service)(struct vnic_rq *rq, + struct cq_desc *cq_desc, struct vnic_rq_buf *buf, + int skipped, void *opaque), void *opaque) +{ + struct vnic_rq_buf *buf; + int skipped; + + buf = rq->to_clean; + while (1) { + + skipped = (buf->index != completed_index); + + (*buf_service)(rq, cq_desc, buf, skipped, opaque); + + if (desc_return == VNIC_RQ_RETURN_DESC) + rq->ring.desc_avail++; + + rq->to_clean = buf->next; + + if (!skipped) + break; + + buf = rq->to_clean; + } +} + +static inline int vnic_rq_fill(struct vnic_rq *rq, + int (*buf_fill)(struct vnic_rq *rq)) +{ + int err; + + while (vnic_rq_desc_avail(rq) > 1) { + + err = (*buf_fill)(rq); + if (err) + return err; + } + + return 0; +} + +void vnic_rq_free(struct vnic_rq *rq); +int vnic_rq_alloc(struct vnic_dev *vdev, struct vnic_rq *rq, unsigned int index, + unsigned int desc_count, unsigned int desc_size); +void vnic_rq_init(struct vnic_rq *rq, unsigned int cq_index, + unsigned int error_interrupt_enable, + unsigned int error_interrupt_offset); +unsigned int vnic_rq_error_status(struct vnic_rq *rq); +void vnic_rq_enable(struct vnic_rq *rq); +int vnic_rq_disable(struct vnic_rq *rq); +void vnic_rq_clean(struct vnic_rq *rq, + void (*buf_clean)(struct vnic_rq *rq, struct vnic_rq_buf *buf)); + +#endif /* _VNIC_RQ_H_ */ diff --git a/drivers/scsi/fnic/vnic_scsi.h b/drivers/scsi/fnic/vnic_scsi.h new file mode 100644 index 00000000000..46baa525400 --- /dev/null +++ b/drivers/scsi/fnic/vnic_scsi.h @@ -0,0 +1,99 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef _VNIC_SCSI_H_ +#define _VNIC_SCSI_H_ + +#define VNIC_FNIC_WQ_COPY_COUNT_MIN 1 +#define VNIC_FNIC_WQ_COPY_COUNT_MAX 1 + +#define VNIC_FNIC_WQ_DESCS_MIN 64 +#define VNIC_FNIC_WQ_DESCS_MAX 128 + +#define VNIC_FNIC_WQ_COPY_DESCS_MIN 64 +#define VNIC_FNIC_WQ_COPY_DESCS_MAX 512 + +#define VNIC_FNIC_RQ_DESCS_MIN 64 +#define VNIC_FNIC_RQ_DESCS_MAX 128 + +#define VNIC_FNIC_EDTOV_MIN 1000 +#define VNIC_FNIC_EDTOV_MAX 255000 +#define VNIC_FNIC_EDTOV_DEF 2000 + +#define VNIC_FNIC_RATOV_MIN 1000 +#define VNIC_FNIC_RATOV_MAX 255000 + +#define VNIC_FNIC_MAXDATAFIELDSIZE_MIN 256 +#define VNIC_FNIC_MAXDATAFIELDSIZE_MAX 2112 + +#define VNIC_FNIC_FLOGI_RETRIES_MIN 0 +#define VNIC_FNIC_FLOGI_RETRIES_MAX 0xffffffff +#define VNIC_FNIC_FLOGI_RETRIES_DEF 0xffffffff + +#define VNIC_FNIC_FLOGI_TIMEOUT_MIN 1000 +#define VNIC_FNIC_FLOGI_TIMEOUT_MAX 255000 + +#define VNIC_FNIC_PLOGI_RETRIES_MIN 0 +#define VNIC_FNIC_PLOGI_RETRIES_MAX 255 +#define VNIC_FNIC_PLOGI_RETRIES_DEF 8 + +#define VNIC_FNIC_PLOGI_TIMEOUT_MIN 1000 +#define VNIC_FNIC_PLOGI_TIMEOUT_MAX 255000 + +#define VNIC_FNIC_IO_THROTTLE_COUNT_MIN 256 +#define VNIC_FNIC_IO_THROTTLE_COUNT_MAX 4096 + +#define VNIC_FNIC_LINK_DOWN_TIMEOUT_MIN 0 +#define VNIC_FNIC_LINK_DOWN_TIMEOUT_MAX 240000 + +#define VNIC_FNIC_PORT_DOWN_TIMEOUT_MIN 0 +#define VNIC_FNIC_PORT_DOWN_TIMEOUT_MAX 240000 + +#define VNIC_FNIC_PORT_DOWN_IO_RETRIES_MIN 0 +#define VNIC_FNIC_PORT_DOWN_IO_RETRIES_MAX 255 + +#define VNIC_FNIC_LUNS_PER_TARGET_MIN 1 +#define VNIC_FNIC_LUNS_PER_TARGET_MAX 1024 + +/* Device-specific region: scsi configuration */ +struct vnic_fc_config { + u64 node_wwn; + u64 port_wwn; + u32 flags; + u32 wq_enet_desc_count; + u32 wq_copy_desc_count; + u32 rq_desc_count; + u32 flogi_retries; + u32 flogi_timeout; + u32 plogi_retries; + u32 plogi_timeout; + u32 io_throttle_count; + u32 link_down_timeout; + u32 port_down_timeout; + u32 port_down_io_retries; + u32 luns_per_tgt; + u16 maxdatafieldsize; + u16 ed_tov; + u16 ra_tov; + u16 intr_timer; + u8 intr_timer_type; +}; + +#define VFCF_FCP_SEQ_LVL_ERR 0x1 /* Enable FCP-2 Error Recovery */ +#define VFCF_PERBI 0x2 /* persistent binding info available */ + +#endif /* _VNIC_SCSI_H_ */ diff --git a/drivers/scsi/fnic/vnic_stats.h b/drivers/scsi/fnic/vnic_stats.h new file mode 100644 index 00000000000..5372e23c1cb --- /dev/null +++ b/drivers/scsi/fnic/vnic_stats.h @@ -0,0 +1,68 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef _VNIC_STATS_H_ +#define _VNIC_STATS_H_ + +/* Tx statistics */ +struct vnic_tx_stats { + u64 tx_frames_ok; + u64 tx_unicast_frames_ok; + u64 tx_multicast_frames_ok; + u64 tx_broadcast_frames_ok; + u64 tx_bytes_ok; + u64 tx_unicast_bytes_ok; + u64 tx_multicast_bytes_ok; + u64 tx_broadcast_bytes_ok; + u64 tx_drops; + u64 tx_errors; + u64 tx_tso; + u64 rsvd[16]; +}; + +/* Rx statistics */ +struct vnic_rx_stats { + u64 rx_frames_ok; + u64 rx_frames_total; + u64 rx_unicast_frames_ok; + u64 rx_multicast_frames_ok; + u64 rx_broadcast_frames_ok; + u64 rx_bytes_ok; + u64 rx_unicast_bytes_ok; + u64 rx_multicast_bytes_ok; + u64 rx_broadcast_bytes_ok; + u64 rx_drop; + u64 rx_no_bufs; + u64 rx_errors; + u64 rx_rss; + u64 rx_crc_errors; + u64 rx_frames_64; + u64 rx_frames_127; + u64 rx_frames_255; + u64 rx_frames_511; + u64 rx_frames_1023; + u64 rx_frames_1518; + u64 rx_frames_to_max; + u64 rsvd[16]; +}; + +struct vnic_stats { + struct vnic_tx_stats tx; + struct vnic_rx_stats rx; +}; + +#endif /* _VNIC_STATS_H_ */ diff --git a/drivers/scsi/fnic/vnic_wq.c b/drivers/scsi/fnic/vnic_wq.c new file mode 100644 index 00000000000..1f9ea790d13 --- /dev/null +++ b/drivers/scsi/fnic/vnic_wq.c @@ -0,0 +1,182 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#include +#include +#include +#include +#include "vnic_dev.h" +#include "vnic_wq.h" + +static int vnic_wq_alloc_bufs(struct vnic_wq *wq) +{ + struct vnic_wq_buf *buf; + struct vnic_dev *vdev; + unsigned int i, j, count = wq->ring.desc_count; + unsigned int blks = VNIC_WQ_BUF_BLKS_NEEDED(count); + + vdev = wq->vdev; + + for (i = 0; i < blks; i++) { + wq->bufs[i] = kzalloc(VNIC_WQ_BUF_BLK_SZ, GFP_ATOMIC); + if (!wq->bufs[i]) { + printk(KERN_ERR "Failed to alloc wq_bufs\n"); + return -ENOMEM; + } + } + + for (i = 0; i < blks; i++) { + buf = wq->bufs[i]; + for (j = 0; j < VNIC_WQ_BUF_BLK_ENTRIES; j++) { + buf->index = i * VNIC_WQ_BUF_BLK_ENTRIES + j; + buf->desc = (u8 *)wq->ring.descs + + wq->ring.desc_size * buf->index; + if (buf->index + 1 == count) { + buf->next = wq->bufs[0]; + break; + } else if (j + 1 == VNIC_WQ_BUF_BLK_ENTRIES) { + buf->next = wq->bufs[i + 1]; + } else { + buf->next = buf + 1; + buf++; + } + } + } + + wq->to_use = wq->to_clean = wq->bufs[0]; + + return 0; +} + +void vnic_wq_free(struct vnic_wq *wq) +{ + struct vnic_dev *vdev; + unsigned int i; + + vdev = wq->vdev; + + vnic_dev_free_desc_ring(vdev, &wq->ring); + + for (i = 0; i < VNIC_WQ_BUF_BLKS_MAX; i++) { + kfree(wq->bufs[i]); + wq->bufs[i] = NULL; + } + + wq->ctrl = NULL; + +} + +int vnic_wq_alloc(struct vnic_dev *vdev, struct vnic_wq *wq, unsigned int index, + unsigned int desc_count, unsigned int desc_size) +{ + int err; + + wq->index = index; + wq->vdev = vdev; + + wq->ctrl = vnic_dev_get_res(vdev, RES_TYPE_WQ, index); + if (!wq->ctrl) { + printk(KERN_ERR "Failed to hook WQ[%d] resource\n", index); + return -EINVAL; + } + + vnic_wq_disable(wq); + + err = vnic_dev_alloc_desc_ring(vdev, &wq->ring, desc_count, desc_size); + if (err) + return err; + + err = vnic_wq_alloc_bufs(wq); + if (err) { + vnic_wq_free(wq); + return err; + } + + return 0; +} + +void vnic_wq_init(struct vnic_wq *wq, unsigned int cq_index, + unsigned int error_interrupt_enable, + unsigned int error_interrupt_offset) +{ + u64 paddr; + + paddr = (u64)wq->ring.base_addr | VNIC_PADDR_TARGET; + writeq(paddr, &wq->ctrl->ring_base); + iowrite32(wq->ring.desc_count, &wq->ctrl->ring_size); + iowrite32(0, &wq->ctrl->fetch_index); + iowrite32(0, &wq->ctrl->posted_index); + iowrite32(cq_index, &wq->ctrl->cq_index); + iowrite32(error_interrupt_enable, &wq->ctrl->error_interrupt_enable); + iowrite32(error_interrupt_offset, &wq->ctrl->error_interrupt_offset); + iowrite32(0, &wq->ctrl->error_status); +} + +unsigned int vnic_wq_error_status(struct vnic_wq *wq) +{ + return ioread32(&wq->ctrl->error_status); +} + +void vnic_wq_enable(struct vnic_wq *wq) +{ + iowrite32(1, &wq->ctrl->enable); +} + +int vnic_wq_disable(struct vnic_wq *wq) +{ + unsigned int wait; + + iowrite32(0, &wq->ctrl->enable); + + /* Wait for HW to ACK disable request */ + for (wait = 0; wait < 100; wait++) { + if (!(ioread32(&wq->ctrl->running))) + return 0; + udelay(1); + } + + printk(KERN_ERR "Failed to disable WQ[%d]\n", wq->index); + + return -ETIMEDOUT; +} + +void vnic_wq_clean(struct vnic_wq *wq, + void (*buf_clean)(struct vnic_wq *wq, struct vnic_wq_buf *buf)) +{ + struct vnic_wq_buf *buf; + + BUG_ON(ioread32(&wq->ctrl->enable)); + + buf = wq->to_clean; + + while (vnic_wq_desc_used(wq) > 0) { + + (*buf_clean)(wq, buf); + + buf = wq->to_clean = buf->next; + wq->ring.desc_avail++; + } + + wq->to_use = wq->to_clean = wq->bufs[0]; + + iowrite32(0, &wq->ctrl->fetch_index); + iowrite32(0, &wq->ctrl->posted_index); + iowrite32(0, &wq->ctrl->error_status); + + vnic_dev_clear_desc_ring(&wq->ring); +} diff --git a/drivers/scsi/fnic/vnic_wq.h b/drivers/scsi/fnic/vnic_wq.h new file mode 100644 index 00000000000..5cd094f7928 --- /dev/null +++ b/drivers/scsi/fnic/vnic_wq.h @@ -0,0 +1,175 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef _VNIC_WQ_H_ +#define _VNIC_WQ_H_ + +#include +#include "vnic_dev.h" +#include "vnic_cq.h" + +/* + * These defines avoid symbol clash between fnic and enic (Cisco 10G Eth + * Driver) when both are built with CONFIG options =y + */ +#define vnic_wq_desc_avail fnic_wq_desc_avail +#define vnic_wq_desc_used fnic_wq_desc_used +#define vnic_wq_next_desc fni_cwq_next_desc +#define vnic_wq_post fnic_wq_post +#define vnic_wq_service fnic_wq_service +#define vnic_wq_free fnic_wq_free +#define vnic_wq_alloc fnic_wq_alloc +#define vnic_wq_init fnic_wq_init +#define vnic_wq_error_status fnic_wq_error_status +#define vnic_wq_enable fnic_wq_enable +#define vnic_wq_disable fnic_wq_disable +#define vnic_wq_clean fnic_wq_clean + +/* Work queue control */ +struct vnic_wq_ctrl { + u64 ring_base; /* 0x00 */ + u32 ring_size; /* 0x08 */ + u32 pad0; + u32 posted_index; /* 0x10 */ + u32 pad1; + u32 cq_index; /* 0x18 */ + u32 pad2; + u32 enable; /* 0x20 */ + u32 pad3; + u32 running; /* 0x28 */ + u32 pad4; + u32 fetch_index; /* 0x30 */ + u32 pad5; + u32 dca_value; /* 0x38 */ + u32 pad6; + u32 error_interrupt_enable; /* 0x40 */ + u32 pad7; + u32 error_interrupt_offset; /* 0x48 */ + u32 pad8; + u32 error_status; /* 0x50 */ + u32 pad9; +}; + +struct vnic_wq_buf { + struct vnic_wq_buf *next; + dma_addr_t dma_addr; + void *os_buf; + unsigned int len; + unsigned int index; + int sop; + void *desc; +}; + +/* Break the vnic_wq_buf allocations into blocks of 64 entries */ +#define VNIC_WQ_BUF_BLK_ENTRIES 64 +#define VNIC_WQ_BUF_BLK_SZ \ + (VNIC_WQ_BUF_BLK_ENTRIES * sizeof(struct vnic_wq_buf)) +#define VNIC_WQ_BUF_BLKS_NEEDED(entries) \ + DIV_ROUND_UP(entries, VNIC_WQ_BUF_BLK_ENTRIES) +#define VNIC_WQ_BUF_BLKS_MAX VNIC_WQ_BUF_BLKS_NEEDED(4096) + +struct vnic_wq { + unsigned int index; + struct vnic_dev *vdev; + struct vnic_wq_ctrl __iomem *ctrl; /* memory-mapped */ + struct vnic_dev_ring ring; + struct vnic_wq_buf *bufs[VNIC_WQ_BUF_BLKS_MAX]; + struct vnic_wq_buf *to_use; + struct vnic_wq_buf *to_clean; + unsigned int pkts_outstanding; +}; + +static inline unsigned int vnic_wq_desc_avail(struct vnic_wq *wq) +{ + /* how many does SW own? */ + return wq->ring.desc_avail; +} + +static inline unsigned int vnic_wq_desc_used(struct vnic_wq *wq) +{ + /* how many does HW own? */ + return wq->ring.desc_count - wq->ring.desc_avail - 1; +} + +static inline void *vnic_wq_next_desc(struct vnic_wq *wq) +{ + return wq->to_use->desc; +} + +static inline void vnic_wq_post(struct vnic_wq *wq, + void *os_buf, dma_addr_t dma_addr, + unsigned int len, int sop, int eop) +{ + struct vnic_wq_buf *buf = wq->to_use; + + buf->sop = sop; + buf->os_buf = eop ? os_buf : NULL; + buf->dma_addr = dma_addr; + buf->len = len; + + buf = buf->next; + if (eop) { + /* Adding write memory barrier prevents compiler and/or CPU + * reordering, thus avoiding descriptor posting before + * descriptor is initialized. Otherwise, hardware can read + * stale descriptor fields. + */ + wmb(); + iowrite32(buf->index, &wq->ctrl->posted_index); + } + wq->to_use = buf; + + wq->ring.desc_avail--; +} + +static inline void vnic_wq_service(struct vnic_wq *wq, + struct cq_desc *cq_desc, u16 completed_index, + void (*buf_service)(struct vnic_wq *wq, + struct cq_desc *cq_desc, struct vnic_wq_buf *buf, void *opaque), + void *opaque) +{ + struct vnic_wq_buf *buf; + + buf = wq->to_clean; + while (1) { + + (*buf_service)(wq, cq_desc, buf, opaque); + + wq->ring.desc_avail++; + + wq->to_clean = buf->next; + + if (buf->index == completed_index) + break; + + buf = wq->to_clean; + } +} + +void vnic_wq_free(struct vnic_wq *wq); +int vnic_wq_alloc(struct vnic_dev *vdev, struct vnic_wq *wq, unsigned int index, + unsigned int desc_count, unsigned int desc_size); +void vnic_wq_init(struct vnic_wq *wq, unsigned int cq_index, + unsigned int error_interrupt_enable, + unsigned int error_interrupt_offset); +unsigned int vnic_wq_error_status(struct vnic_wq *wq); +void vnic_wq_enable(struct vnic_wq *wq); +int vnic_wq_disable(struct vnic_wq *wq); +void vnic_wq_clean(struct vnic_wq *wq, + void (*buf_clean)(struct vnic_wq *wq, struct vnic_wq_buf *buf)); + +#endif /* _VNIC_WQ_H_ */ diff --git a/drivers/scsi/fnic/vnic_wq_copy.c b/drivers/scsi/fnic/vnic_wq_copy.c new file mode 100644 index 00000000000..9eab7e7caf3 --- /dev/null +++ b/drivers/scsi/fnic/vnic_wq_copy.c @@ -0,0 +1,117 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#include +#include +#include +#include +#include "vnic_wq_copy.h" + +void vnic_wq_copy_enable(struct vnic_wq_copy *wq) +{ + iowrite32(1, &wq->ctrl->enable); +} + +int vnic_wq_copy_disable(struct vnic_wq_copy *wq) +{ + unsigned int wait; + + iowrite32(0, &wq->ctrl->enable); + + /* Wait for HW to ACK disable request */ + for (wait = 0; wait < 100; wait++) { + if (!(ioread32(&wq->ctrl->running))) + return 0; + udelay(1); + } + + printk(KERN_ERR "Failed to disable Copy WQ[%d]," + " fetch index=%d, posted_index=%d\n", + wq->index, ioread32(&wq->ctrl->fetch_index), + ioread32(&wq->ctrl->posted_index)); + + return -ENODEV; +} + +void vnic_wq_copy_clean(struct vnic_wq_copy *wq, + void (*q_clean)(struct vnic_wq_copy *wq, + struct fcpio_host_req *wq_desc)) +{ + BUG_ON(ioread32(&wq->ctrl->enable)); + + if (vnic_wq_copy_desc_in_use(wq)) + vnic_wq_copy_service(wq, -1, q_clean); + + wq->to_use_index = wq->to_clean_index = 0; + + iowrite32(0, &wq->ctrl->fetch_index); + iowrite32(0, &wq->ctrl->posted_index); + iowrite32(0, &wq->ctrl->error_status); + + vnic_dev_clear_desc_ring(&wq->ring); +} + +void vnic_wq_copy_free(struct vnic_wq_copy *wq) +{ + struct vnic_dev *vdev; + + vdev = wq->vdev; + vnic_dev_free_desc_ring(vdev, &wq->ring); + wq->ctrl = NULL; +} + +int vnic_wq_copy_alloc(struct vnic_dev *vdev, struct vnic_wq_copy *wq, + unsigned int index, unsigned int desc_count, + unsigned int desc_size) +{ + int err; + + wq->index = index; + wq->vdev = vdev; + wq->to_use_index = wq->to_clean_index = 0; + wq->ctrl = vnic_dev_get_res(vdev, RES_TYPE_WQ, index); + if (!wq->ctrl) { + printk(KERN_ERR "Failed to hook COPY WQ[%d] resource\n", index); + return -EINVAL; + } + + vnic_wq_copy_disable(wq); + + err = vnic_dev_alloc_desc_ring(vdev, &wq->ring, desc_count, desc_size); + if (err) + return err; + + return 0; +} + +void vnic_wq_copy_init(struct vnic_wq_copy *wq, unsigned int cq_index, + unsigned int error_interrupt_enable, + unsigned int error_interrupt_offset) +{ + u64 paddr; + + paddr = (u64)wq->ring.base_addr | VNIC_PADDR_TARGET; + writeq(paddr, &wq->ctrl->ring_base); + iowrite32(wq->ring.desc_count, &wq->ctrl->ring_size); + iowrite32(0, &wq->ctrl->fetch_index); + iowrite32(0, &wq->ctrl->posted_index); + iowrite32(cq_index, &wq->ctrl->cq_index); + iowrite32(error_interrupt_enable, &wq->ctrl->error_interrupt_enable); + iowrite32(error_interrupt_offset, &wq->ctrl->error_interrupt_offset); +} + diff --git a/drivers/scsi/fnic/vnic_wq_copy.h b/drivers/scsi/fnic/vnic_wq_copy.h new file mode 100644 index 00000000000..6aff9740c3d --- /dev/null +++ b/drivers/scsi/fnic/vnic_wq_copy.h @@ -0,0 +1,128 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef _VNIC_WQ_COPY_H_ +#define _VNIC_WQ_COPY_H_ + +#include +#include "vnic_wq.h" +#include "fcpio.h" + +#define VNIC_WQ_COPY_MAX 1 + +struct vnic_wq_copy { + unsigned int index; + struct vnic_dev *vdev; + struct vnic_wq_ctrl __iomem *ctrl; /* memory-mapped */ + struct vnic_dev_ring ring; + unsigned to_use_index; + unsigned to_clean_index; +}; + +static inline unsigned int vnic_wq_copy_desc_avail(struct vnic_wq_copy *wq) +{ + return wq->ring.desc_avail; +} + +static inline unsigned int vnic_wq_copy_desc_in_use(struct vnic_wq_copy *wq) +{ + return wq->ring.desc_count - 1 - wq->ring.desc_avail; +} + +static inline void *vnic_wq_copy_next_desc(struct vnic_wq_copy *wq) +{ + struct fcpio_host_req *desc = wq->ring.descs; + return &desc[wq->to_use_index]; +} + +static inline void vnic_wq_copy_post(struct vnic_wq_copy *wq) +{ + + ((wq->to_use_index + 1) == wq->ring.desc_count) ? + (wq->to_use_index = 0) : (wq->to_use_index++); + wq->ring.desc_avail--; + + /* Adding write memory barrier prevents compiler and/or CPU + * reordering, thus avoiding descriptor posting before + * descriptor is initialized. Otherwise, hardware can read + * stale descriptor fields. + */ + wmb(); + + iowrite32(wq->to_use_index, &wq->ctrl->posted_index); +} + +static inline void vnic_wq_copy_desc_process(struct vnic_wq_copy *wq, u16 index) +{ + unsigned int cnt; + + if (wq->to_clean_index <= index) + cnt = (index - wq->to_clean_index) + 1; + else + cnt = wq->ring.desc_count - wq->to_clean_index + index + 1; + + wq->to_clean_index = ((index + 1) % wq->ring.desc_count); + wq->ring.desc_avail += cnt; + +} + +static inline void vnic_wq_copy_service(struct vnic_wq_copy *wq, + u16 completed_index, + void (*q_service)(struct vnic_wq_copy *wq, + struct fcpio_host_req *wq_desc)) +{ + struct fcpio_host_req *wq_desc = wq->ring.descs; + unsigned int curr_index; + + while (1) { + + if (q_service) + (*q_service)(wq, &wq_desc[wq->to_clean_index]); + + wq->ring.desc_avail++; + + curr_index = wq->to_clean_index; + + /* increment the to-clean index so that we start + * with an unprocessed index next time we enter the loop + */ + ((wq->to_clean_index + 1) == wq->ring.desc_count) ? + (wq->to_clean_index = 0) : (wq->to_clean_index++); + + if (curr_index == completed_index) + break; + + /* we have cleaned all the entries */ + if ((completed_index == (u16)-1) && + (wq->to_clean_index == wq->to_use_index)) + break; + } +} + +void vnic_wq_copy_enable(struct vnic_wq_copy *wq); +int vnic_wq_copy_disable(struct vnic_wq_copy *wq); +void vnic_wq_copy_free(struct vnic_wq_copy *wq); +int vnic_wq_copy_alloc(struct vnic_dev *vdev, struct vnic_wq_copy *wq, + unsigned int index, unsigned int desc_count, unsigned int desc_size); +void vnic_wq_copy_init(struct vnic_wq_copy *wq, unsigned int cq_index, + unsigned int error_interrupt_enable, + unsigned int error_interrupt_offset); +void vnic_wq_copy_clean(struct vnic_wq_copy *wq, + void (*q_clean)(struct vnic_wq_copy *wq, + struct fcpio_host_req *wq_desc)); + +#endif /* _VNIC_WQ_COPY_H_ */ diff --git a/drivers/scsi/fnic/wq_enet_desc.h b/drivers/scsi/fnic/wq_enet_desc.h new file mode 100644 index 00000000000..b121cbad18b --- /dev/null +++ b/drivers/scsi/fnic/wq_enet_desc.h @@ -0,0 +1,96 @@ +/* + * Copyright 2008 Cisco Systems, Inc. All rights reserved. + * Copyright 2007 Nuova Systems, Inc. All rights reserved. + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +#ifndef _WQ_ENET_DESC_H_ +#define _WQ_ENET_DESC_H_ + +/* Ethernet work queue descriptor: 16B */ +struct wq_enet_desc { + __le64 address; + __le16 length; + __le16 mss_loopback; + __le16 header_length_flags; + __le16 vlan_tag; +}; + +#define WQ_ENET_ADDR_BITS 64 +#define WQ_ENET_LEN_BITS 14 +#define WQ_ENET_LEN_MASK ((1 << WQ_ENET_LEN_BITS) - 1) +#define WQ_ENET_MSS_BITS 14 +#define WQ_ENET_MSS_MASK ((1 << WQ_ENET_MSS_BITS) - 1) +#define WQ_ENET_MSS_SHIFT 2 +#define WQ_ENET_LOOPBACK_SHIFT 1 +#define WQ_ENET_HDRLEN_BITS 10 +#define WQ_ENET_HDRLEN_MASK ((1 << WQ_ENET_HDRLEN_BITS) - 1) +#define WQ_ENET_FLAGS_OM_BITS 2 +#define WQ_ENET_FLAGS_OM_MASK ((1 << WQ_ENET_FLAGS_OM_BITS) - 1) +#define WQ_ENET_FLAGS_EOP_SHIFT 12 +#define WQ_ENET_FLAGS_CQ_ENTRY_SHIFT 13 +#define WQ_ENET_FLAGS_FCOE_ENCAP_SHIFT 14 +#define WQ_ENET_FLAGS_VLAN_TAG_INSERT_SHIFT 15 + +#define WQ_ENET_OFFLOAD_MODE_CSUM 0 +#define WQ_ENET_OFFLOAD_MODE_RESERVED 1 +#define WQ_ENET_OFFLOAD_MODE_CSUM_L4 2 +#define WQ_ENET_OFFLOAD_MODE_TSO 3 + +static inline void wq_enet_desc_enc(struct wq_enet_desc *desc, + u64 address, u16 length, u16 mss, u16 header_length, + u8 offload_mode, u8 eop, u8 cq_entry, u8 fcoe_encap, + u8 vlan_tag_insert, u16 vlan_tag, u8 loopback) +{ + desc->address = cpu_to_le64(address); + desc->length = cpu_to_le16(length & WQ_ENET_LEN_MASK); + desc->mss_loopback = cpu_to_le16((mss & WQ_ENET_MSS_MASK) << + WQ_ENET_MSS_SHIFT | (loopback & 1) << WQ_ENET_LOOPBACK_SHIFT); + desc->header_length_flags = cpu_to_le16( + (header_length & WQ_ENET_HDRLEN_MASK) | + (offload_mode & WQ_ENET_FLAGS_OM_MASK) << WQ_ENET_HDRLEN_BITS | + (eop & 1) << WQ_ENET_FLAGS_EOP_SHIFT | + (cq_entry & 1) << WQ_ENET_FLAGS_CQ_ENTRY_SHIFT | + (fcoe_encap & 1) << WQ_ENET_FLAGS_FCOE_ENCAP_SHIFT | + (vlan_tag_insert & 1) << WQ_ENET_FLAGS_VLAN_TAG_INSERT_SHIFT); + desc->vlan_tag = cpu_to_le16(vlan_tag); +} + +static inline void wq_enet_desc_dec(struct wq_enet_desc *desc, + u64 *address, u16 *length, u16 *mss, u16 *header_length, + u8 *offload_mode, u8 *eop, u8 *cq_entry, u8 *fcoe_encap, + u8 *vlan_tag_insert, u16 *vlan_tag, u8 *loopback) +{ + *address = le64_to_cpu(desc->address); + *length = le16_to_cpu(desc->length) & WQ_ENET_LEN_MASK; + *mss = (le16_to_cpu(desc->mss_loopback) >> WQ_ENET_MSS_SHIFT) & + WQ_ENET_MSS_MASK; + *loopback = (u8)((le16_to_cpu(desc->mss_loopback) >> + WQ_ENET_LOOPBACK_SHIFT) & 1); + *header_length = le16_to_cpu(desc->header_length_flags) & + WQ_ENET_HDRLEN_MASK; + *offload_mode = (u8)((le16_to_cpu(desc->header_length_flags) >> + WQ_ENET_HDRLEN_BITS) & WQ_ENET_FLAGS_OM_MASK); + *eop = (u8)((le16_to_cpu(desc->header_length_flags) >> + WQ_ENET_FLAGS_EOP_SHIFT) & 1); + *cq_entry = (u8)((le16_to_cpu(desc->header_length_flags) >> + WQ_ENET_FLAGS_CQ_ENTRY_SHIFT) & 1); + *fcoe_encap = (u8)((le16_to_cpu(desc->header_length_flags) >> + WQ_ENET_FLAGS_FCOE_ENCAP_SHIFT) & 1); + *vlan_tag_insert = (u8)((le16_to_cpu(desc->header_length_flags) >> + WQ_ENET_FLAGS_VLAN_TAG_INSERT_SHIFT) & 1); + *vlan_tag = le16_to_cpu(desc->vlan_tag); +} + +#endif /* _WQ_ENET_DESC_H_ */ -- cgit v1.2.3 From fbc97e4c5c31ea198f912196b1379d7493362800 Mon Sep 17 00:00:00 2001 From: Alan Jenkins Date: Mon, 27 Apr 2009 09:23:37 +0200 Subject: eeepc-laptop: fix wlan rfkill state change during init When an rfkill device is registered, the rfkill core will change its state to the system default. So we need to prepare for state changes *before* we register it. That means installing the eeepc-specific ACPI callback which handles the hotplug of the wireless network adaptor. This problem doesn't occur during normal operation. You have to 1) Boot with wireless enabled. eeepc-laptop should load automatically. 2) modprobe -r eeepc-laptop 3) modprobe eeepc-laptop On boot, the default rfkill state will be set to enabled. With the current core code, step 2) will disable the wireless. Therefore in step 3), the wireless will change state during registration, from disabled to enabled. But without this fix, the PCI device for the wireless adaptor will not appear. Signed-off-by: Alan Jenkins Acked-by: Matthew Garrett Signed-off-by: Corentin Chary Signed-off-by: Len Brown --- drivers/platform/x86/eeepc-laptop.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c index 6f54fd1757c..e21f7cd72e4 100644 --- a/drivers/platform/x86/eeepc-laptop.c +++ b/drivers/platform/x86/eeepc-laptop.c @@ -649,6 +649,9 @@ static int eeepc_hotk_add(struct acpi_device *device) if (ACPI_FAILURE(status)) printk(EEEPC_ERR "Error installing notify handler\n"); + eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P6"); + eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P7"); + if (get_acpi(CM_ASL_WLAN) != -1) { ehotk->eeepc_wlan_rfkill = rfkill_allocate(&device->dev, RFKILL_TYPE_WLAN); @@ -704,9 +707,6 @@ static int eeepc_hotk_add(struct acpi_device *device) goto bluetooth_fail; } - eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P6"); - eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P7"); - return 0; bluetooth_fail: -- cgit v1.2.3 From 64b86b6583db832b28bb54575e32b9e2a1a7d84f Mon Sep 17 00:00:00 2001 From: Darren Salt Date: Mon, 27 Apr 2009 09:23:38 +0200 Subject: eeepc-laptop: report brightness control events via the input layer This maps the brightness control events to one of two keys, either KEY_BRIGHTNESSDOWN or KEY_BRIGHTNESSUP, as needed. Some mapping has to be done due to the fact that the BIOS reports them as + ; the selection is done according to the sign of the change in brightness (if this is 0, no keypress is reported). (Ref. http://lists.alioth.debian.org/pipermail/debian-eeepc-devel/2009-April/002001.html) Signed-off-by: Darren Salt Signed-off-by: Corentin Chary Signed-off-by: Len Brown --- drivers/platform/x86/eeepc-laptop.c | 29 ++++++++++++++++++++++++++--- 1 file changed, 26 insertions(+), 3 deletions(-) diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c index e21f7cd72e4..f54cfeac522 100644 --- a/drivers/platform/x86/eeepc-laptop.c +++ b/drivers/platform/x86/eeepc-laptop.c @@ -166,6 +166,8 @@ static struct key_entry eeepc_keymap[] = { {KE_KEY, 0x1b, KEY_ZOOM }, {KE_KEY, 0x1c, KEY_PROG2 }, {KE_KEY, 0x1d, KEY_PROG3 }, + {KE_KEY, NOTIFY_BRN_MIN, KEY_BRIGHTNESSDOWN }, + {KE_KEY, NOTIFY_BRN_MIN + 2, KEY_BRIGHTNESSUP }, {KE_KEY, 0x30, KEY_SWITCHVIDEOMODE }, {KE_KEY, 0x31, KEY_SWITCHVIDEOMODE }, {KE_KEY, 0x32, KEY_SWITCHVIDEOMODE }, @@ -512,11 +514,16 @@ static int eeepc_hotk_check(void) return 0; } -static void notify_brn(void) +static int notify_brn(void) { + /* returns the *previous* brightness, or -1 */ struct backlight_device *bd = eeepc_backlight_device; - if (bd) + if (bd) { + int old = bd->props.brightness; bd->props.brightness = read_brightness(bd); + return old; + } + return -1; } static void eeepc_rfkill_notify(acpi_handle handle, u32 event, void *data) @@ -558,17 +565,33 @@ static void eeepc_hotk_notify(acpi_handle handle, u32 event, void *data) { static struct key_entry *key; u16 count; + int brn = -ENODEV; if (!ehotk) return; if (event >= NOTIFY_BRN_MIN && event <= NOTIFY_BRN_MAX) - notify_brn(); + brn = notify_brn(); count = ehotk->event_count[event % 128]++; acpi_bus_generate_proc_event(ehotk->device, event, count); acpi_bus_generate_netlink_event(ehotk->device->pnp.device_class, dev_name(&ehotk->device->dev), event, count); if (ehotk->inputdev) { + if (brn != -ENODEV) { + /* brightness-change events need special + * handling for conversion to key events + */ + if (brn < 0) + brn = event; + else + brn += NOTIFY_BRN_MIN; + if (event < brn) + event = NOTIFY_BRN_MIN; /* brightness down */ + else if (event > brn) + event = NOTIFY_BRN_MIN + 2; /* ... up */ + else + event = NOTIFY_BRN_MIN + 1; /* ... unchanged */ + } key = eepc_get_entry_by_scancode(event); if (key) { switch (key->type) { -- cgit v1.2.3 From 978605c4fd8e7470f225eec7b5aab69d8796afcc Mon Sep 17 00:00:00 2001 From: Alan Jenkins Date: Mon, 27 Apr 2009 09:23:39 +0200 Subject: eeepc-laptop: Work around rfkill firmware bug 1) Buggy firmware can change the RFKILL state by itself. This is easily detected. The RFKILL API states that in such cases, we should call rfkill_force_state() to notify the core. I have reported the bug to Asus. I believe this is the right thing to do for robustness, even if this particular firmware bug is fixed. 2) The same bug causes the wireless toggle key to be reported as 0x11 instead of 0x10. 0x11 is otherwise unused, so it should be safe to add this as a new keycode. The bug is triggered by removing the laptop battery while hibernated. On resume, the wireless toggle key causes the firmware to toggle the wireless state itself. (Also, the key is reported as 0x11 when the current wireless state is OFF). This is very poor behaviour because the OS can't predict whether the firmware is controlling the RFKILL state. Without this workaround, the bug means users have to press the wireless toggle key twice to enable, due to the OS/firmware conflict. (Assuming rfkill-input or equivalent is being used). The workaround avoids this. I believe that acpid scripts which toggle the value of the sysfs state file when the toggle key is pressed will be rendered ineffective by the bug, regardless of this workaround. If they simply toggle the state, when the firmware has already toggled it, then you will never see a state change. Tested on "EEEPC 4G" only. Signed-off-by: Alan Jenkins Signed-off-by: Corentin Chary Signed-off-by: Len Brown --- drivers/platform/x86/eeepc-laptop.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c index f54cfeac522..57f21f0a565 100644 --- a/drivers/platform/x86/eeepc-laptop.c +++ b/drivers/platform/x86/eeepc-laptop.c @@ -158,6 +158,7 @@ enum { KE_KEY, KE_END }; static struct key_entry eeepc_keymap[] = { /* Sleep already handled via generic ACPI code */ {KE_KEY, 0x10, KEY_WLAN }, + {KE_KEY, 0x11, KEY_WLAN }, {KE_KEY, 0x12, KEY_PROG1 }, {KE_KEY, 0x13, KEY_MUTE }, {KE_KEY, 0x14, KEY_VOLUMEDOWN }, @@ -528,6 +529,7 @@ static int notify_brn(void) static void eeepc_rfkill_notify(acpi_handle handle, u32 event, void *data) { + enum rfkill_state state; struct pci_dev *dev; struct pci_bus *bus = pci_find_bus(0, 1); @@ -539,7 +541,9 @@ static void eeepc_rfkill_notify(acpi_handle handle, u32 event, void *data) return; } - if (get_acpi(CM_ASL_WLAN) == 1) { + eeepc_wlan_rfkill_state(ehotk->eeepc_wlan_rfkill, &state); + + if (state == RFKILL_STATE_UNBLOCKED) { dev = pci_get_slot(bus, 0); if (dev) { /* Device already present */ @@ -559,6 +563,8 @@ static void eeepc_rfkill_notify(acpi_handle handle, u32 event, void *data) pci_dev_put(dev); } } + + rfkill_force_state(ehotk->eeepc_wlan_rfkill, state); } static void eeepc_hotk_notify(acpi_handle handle, u32 event, void *data) -- cgit v1.2.3 From 158ca1d75dd0d6223f3b1dd741d30777da62ab80 Mon Sep 17 00:00:00 2001 From: Grigori Goronzy Date: Mon, 27 Apr 2009 09:23:40 +0200 Subject: eeepc-laptop: support for super hybrid engine (SHE) The older eeepc-acpi driver allowed to control the SHE performance preset through a ACPI function for just this purpose. SHE underclocks and undervolts the FSB and undervolts the CPU (at preset 2, "powersave"), or slightly overclocks the CPU (at preset 0, "performance"). Preset 1 is the default setting with default clocks and voltage. The new eeepc-laptop driver doesn't support it anymore. The attached patch adds support for it to eeepc-laptop. It's very straight-forward and almost trivial. Signed-off-by: Grigori Goronzy Signed-off-by: Corentin Chary Signed-off-by: Len Brown --- drivers/platform/x86/eeepc-laptop.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c index 57f21f0a565..7aaf5879f66 100644 --- a/drivers/platform/x86/eeepc-laptop.c +++ b/drivers/platform/x86/eeepc-laptop.c @@ -384,11 +384,13 @@ static ssize_t show_sys_acpi(int cm, char *buf) EEEPC_CREATE_DEVICE_ATTR(camera, CM_ASL_CAMERA); EEEPC_CREATE_DEVICE_ATTR(cardr, CM_ASL_CARDREADER); EEEPC_CREATE_DEVICE_ATTR(disp, CM_ASL_DISPLAYSWITCH); +EEEPC_CREATE_DEVICE_ATTR(cpufv, CM_ASL_CPUFV); static struct attribute *platform_attributes[] = { &dev_attr_camera.attr, &dev_attr_cardr.attr, &dev_attr_disp.attr, + &dev_attr_cpufv.attr, NULL }; -- cgit v1.2.3 From 309f5fbda37d5e8f1233e8b80b8e9de77262e864 Mon Sep 17 00:00:00 2001 From: Corentin Chary Date: Mon, 27 Apr 2009 09:23:42 +0200 Subject: asus-laptop: fix input keycode KEY_STOP is now KEY_STOPCD It's the correct key to stop a media BTN_EXTRA is now KEY_SCREENLOCK: The laptop manual tells us that this key is for screenlock KEY_TV is now KEY_PROG1 So it can be reported to X server Ref: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/361505 Signed-off-by: Corentin Chary Signed-off-by: Len Brown --- drivers/platform/x86/asus-laptop.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/platform/x86/asus-laptop.c b/drivers/platform/x86/asus-laptop.c index eeafc6c0160..bfc1a8892a3 100644 --- a/drivers/platform/x86/asus-laptop.c +++ b/drivers/platform/x86/asus-laptop.c @@ -269,16 +269,16 @@ static struct key_entry asus_keymap[] = { {KE_KEY, 0x34, KEY_SWITCHVIDEOMODE}, {KE_KEY, 0x40, KEY_PREVIOUSSONG}, {KE_KEY, 0x41, KEY_NEXTSONG}, - {KE_KEY, 0x43, KEY_STOP}, + {KE_KEY, 0x43, KEY_STOPCD}, {KE_KEY, 0x45, KEY_PLAYPAUSE}, {KE_KEY, 0x50, KEY_EMAIL}, {KE_KEY, 0x51, KEY_WWW}, - {KE_KEY, 0x5C, BTN_EXTRA}, /* Performance */ + {KE_KEY, 0x5C, KEY_SCREENLOCK}, /* Screenlock */ {KE_KEY, 0x5D, KEY_WLAN}, {KE_KEY, 0x61, KEY_SWITCHVIDEOMODE}, {KE_KEY, 0x6B, BTN_TOUCH}, /* Lock Mouse */ {KE_KEY, 0x82, KEY_CAMERA}, - {KE_KEY, 0x8A, KEY_TV}, + {KE_KEY, 0x8A, KEY_PROG1}, {KE_KEY, 0x95, KEY_MEDIA}, {KE_KEY, 0x99, KEY_PHONE}, {KE_END, 0}, -- cgit v1.2.3 From bd32005e126a465deda5d046a62f6bb842f4d9cf Mon Sep 17 00:00:00 2001 From: Corentin Chary Date: Mon, 27 Apr 2009 09:23:43 +0200 Subject: eeepc-laptop: unregister_rfkill_notifier on failure If there is a failure during eeepc_hotk_add() we need to remove the acpi_notify_handler. Signed-off-by: Corentin Chary Signed-off-by: Len Brown --- drivers/platform/x86/eeepc-laptop.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c index 7aaf5879f66..353a898c369 100644 --- a/drivers/platform/x86/eeepc-laptop.c +++ b/drivers/platform/x86/eeepc-laptop.c @@ -748,6 +748,8 @@ static int eeepc_hotk_add(struct acpi_device *device) wlan_fail: if (ehotk->eeepc_wlan_rfkill) rfkill_free(ehotk->eeepc_wlan_rfkill); + eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P6"); + eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P7"); ehotk_fail: kfree(ehotk); ehotk = NULL; -- cgit v1.2.3 From 29321357ac6db54eeb8574da1f6c3e0ce8cfbb60 Mon Sep 17 00:00:00 2001 From: Vladimir Zajac Date: Wed, 6 May 2009 19:34:21 +0200 Subject: thermal: fix off-by-1 error in trip point trigger condition This patch fixes a regression caused by commit b1569e99c795bf83b4ddf41c4f1c42761ab7f75e "ACPI: move thermal trip handling to generic thermal layer" which accidentally changed trip point trigger condition to temp > trip_temp This patch changes the trigger condition back to temp >= trip_temp Signed-off-by: Vladimir Zajac Acked-by: Zhang Rui Acked-by: Matthew Garrett Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- drivers/thermal/thermal_sys.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c index d0b093b66ad..5e38ba10a3a 100644 --- a/drivers/thermal/thermal_sys.c +++ b/drivers/thermal/thermal_sys.c @@ -961,7 +961,7 @@ void thermal_zone_device_update(struct thermal_zone_device *tz) switch (trip_type) { case THERMAL_TRIP_CRITICAL: - if (temp > trip_temp) { + if (temp >= trip_temp) { if (tz->ops->notify) ret = tz->ops->notify(tz, count, trip_type); @@ -974,7 +974,7 @@ void thermal_zone_device_update(struct thermal_zone_device *tz) } break; case THERMAL_TRIP_HOT: - if (temp > trip_temp) + if (temp >= trip_temp) if (tz->ops->notify) tz->ops->notify(tz, count, trip_type); break; @@ -986,14 +986,14 @@ void thermal_zone_device_update(struct thermal_zone_device *tz) cdev = instance->cdev; - if (temp > trip_temp) + if (temp >= trip_temp) cdev->ops->set_cur_state(cdev, 1); else cdev->ops->set_cur_state(cdev, 0); } break; case THERMAL_TRIP_PASSIVE: - if (temp > trip_temp || tz->passive) + if (temp >= trip_temp || tz->passive) thermal_zone_device_passive(tz, temp, trip_temp, count); break; -- cgit v1.2.3 From c53a284f8be23735dc6b53929640a987055f2933 Mon Sep 17 00:00:00 2001 From: Edward Goggin Date: Thu, 9 Apr 2009 10:02:22 -0700 Subject: [SCSI] initialize max_target_blocked in scsi_alloc_target This patch initializes the max_target_blocked field of a scsi target structure so that a queuecommand return value of SCSI_MLQUEUE_TARGET_BUSY will actually result in having the scsi_queue_insert blocking the device queue before requeuing the command and running the queue. Otherwise, can and does cause livelock on single CPU configurations if/when open-iSCSI software initiator's command PDU window fills. Signed-off-by: Ed Goggin Signed-off-by: James Bottomley --- drivers/scsi/scsi_scan.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c index 6f51ca485f3..e2b50d8f57a 100644 --- a/drivers/scsi/scsi_scan.c +++ b/drivers/scsi/scsi_scan.c @@ -425,6 +425,7 @@ static struct scsi_target *scsi_alloc_target(struct device *parent, INIT_LIST_HEAD(&starget->devices); starget->state = STARGET_CREATED; starget->scsi_level = SCSI_2; + starget->max_target_blocked = SCSI_DEFAULT_TARGET_BLOCKED; retry: spin_lock_irqsave(shost->host_lock, flags); -- cgit v1.2.3 From 4e5b6d006b61b6b998e15da850d959520f811b4c Mon Sep 17 00:00:00 2001 From: Inaky Perez-Gonzalez Date: Fri, 8 May 2009 14:02:32 -0700 Subject: wimax/i2400m: fix device crash: fix optimization in _roq_queue_update_ws When the i2400m receives data and the device indicates there has to be reordering, we keep an sliding window implementation to sort the packets before sending them to the network stack. One of the "operations" that the device indicates is "queue a packet and update the window start". When the queue is empty, this is equivalent to "deliver the packet and update the window start". That case was optimized in i2400m_roq_queue_update_ws() so that we would not pointlessly queue and dequeue a packet. However, when the optimization was active, it wasn't updating the window start. That caused the reorder management code to get confused later on with what seemed to be wrong reorder requests from the device. Thus the fix implemented is to do the right thing and update the window start in both cases, when the queue is empty (and the optimization is done) and when not. Signed-off-by: Inaky Perez-Gonzalez --- drivers/net/wimax/i2400m/rx.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/net/wimax/i2400m/rx.c b/drivers/net/wimax/i2400m/rx.c index 02419bfd64b..f9fc3890232 100644 --- a/drivers/net/wimax/i2400m/rx.c +++ b/drivers/net/wimax/i2400m/rx.c @@ -819,10 +819,9 @@ void i2400m_roq_queue_update_ws(struct i2400m *i2400m, struct i2400m_roq *roq, roq_data = (struct i2400m_roq_data *) &skb->cb; i2400m_net_erx(i2400m, skb, roq_data->cs); } - else { + else __i2400m_roq_queue(i2400m, roq, skb, sn, nsn); - __i2400m_roq_update_ws(i2400m, roq, sn + 1); - } + __i2400m_roq_update_ws(i2400m, roq, sn + 1); i2400m_roq_log_add(i2400m, roq, I2400M_RO_TYPE_PACKET_WS, old_ws, len, sn, nsn, roq->ws); } -- cgit v1.2.3 From ceec1c33c36e4783cba41416f327f4bbc05218c3 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 17 Apr 2009 12:29:22 +0100 Subject: [ARM] nwfpe: Add decleration for ExtendedCPDO Add header file decleration for 'ExtendedCPDO' in fpa11.h to stop the following sparse warning: extended_cpdo.c:90:14: warning: symbol 'ExtendedCPDO' was not declared. Should it be static? Signed-off-by: Ben Dooks --- arch/arm/nwfpe/fpa11.h | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/nwfpe/fpa11.h b/arch/arm/nwfpe/fpa11.h index 386cbd13eaf..d3a6f9298e9 100644 --- a/arch/arm/nwfpe/fpa11.h +++ b/arch/arm/nwfpe/fpa11.h @@ -114,4 +114,8 @@ extern unsigned int SingleCPDO(struct roundingData *roundData, extern unsigned int DoubleCPDO(struct roundingData *roundData, const unsigned int opcode, FPREG * rFd); +/* extneded_cpdo.c */ +extern unsigned int ExtendedCPDO(struct roundingData *roundData, + const unsigned int opcode, FPREG * rFd); + #endif -- cgit v1.2.3 From 3ea385f061d08a9509a884e347ad1007bb6c3c66 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 17 Apr 2009 12:21:56 +0100 Subject: [ARM] nwfpe: fix 'floatx80_is_nan' sparse warning The symbol 'floatx80_is_nan' prototype was defined locally in fpa11_cprt.c when it was built outside the file in softfloat-specialisze. Move this into softfloat.h to fix the following sparse warning: softfloat-specialize:276:6: warning: symbol 'floatx80_is_nan' was not declared. Should it be static? Signed-off-by: Ben Dooks --- arch/arm/nwfpe/fpa11_cprt.c | 4 ---- arch/arm/nwfpe/softfloat.h | 2 ++ 2 files changed, 2 insertions(+), 4 deletions(-) diff --git a/arch/arm/nwfpe/fpa11_cprt.c b/arch/arm/nwfpe/fpa11_cprt.c index 9843dc53304..31c4eeec18b 100644 --- a/arch/arm/nwfpe/fpa11_cprt.c +++ b/arch/arm/nwfpe/fpa11_cprt.c @@ -27,10 +27,6 @@ #include "fpmodule.inl" #include "softfloat.h" -#ifdef CONFIG_FPE_NWFPE_XP -extern flag floatx80_is_nan(floatx80); -#endif - unsigned int PerformFLT(const unsigned int opcode); unsigned int PerformFIX(const unsigned int opcode); diff --git a/arch/arm/nwfpe/softfloat.h b/arch/arm/nwfpe/softfloat.h index 260fe29d73f..13e479c5da5 100644 --- a/arch/arm/nwfpe/softfloat.h +++ b/arch/arm/nwfpe/softfloat.h @@ -226,6 +226,8 @@ char floatx80_le_quiet( floatx80, floatx80 ); char floatx80_lt_quiet( floatx80, floatx80 ); char floatx80_is_signaling_nan( floatx80 ); +extern flag floatx80_is_nan(floatx80); + #endif static inline flag extractFloat32Sign(float32 a) -- cgit v1.2.3 From f36dd6e7c0c04a056d3441185a17e5d4e3723192 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Thu, 7 May 2009 15:07:47 +0200 Subject: [ARM] S3C64XX: GPIO include cleanup Cleanup arm/plat-s3c64xx/include/plat/gpio-bank-h.h include file. Using shift-left operation with value >32 is a bad habit. Reviewed-by: Kyungmin Park Signed-off-by: Marek Szyprowski Signed-off-by: Ben Dooks --- arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h index 81549516572..2ba1767512d 100644 --- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h +++ b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h @@ -61,14 +61,14 @@ #define S3C64XX_GPH7_ADDR_CF1 (0x06 << 28) #define S3C64XX_GPH7_EINT_G6_7 (0x07 << 28) -#define S3C64XX_GPH8_MMC1_DATA6 (0x02 << 32) -#define S3C64XX_GPH8_MMC2_DATA2 (0x03 << 32) -#define S3C64XX_GPH8_I2S_V40_LRCLK (0x05 << 32) -#define S3C64XX_GPH8_ADDR_CF2 (0x06 << 32) -#define S3C64XX_GPH8_EINT_G6_8 (0x07 << 32) - -#define S3C64XX_GPH9_MMC1_DATA7 (0x02 << 36) -#define S3C64XX_GPH9_MMC2_DATA3 (0x03 << 36) -#define S3C64XX_GPH9_I2S_V40_DI (0x05 << 36) -#define S3C64XX_GPH9_EINT_G6_9 (0x07 << 36) +#define S3C64XX_GPH8_MMC1_DATA6 (0x02 << 0) +#define S3C64XX_GPH8_MMC2_DATA2 (0x03 << 0) +#define S3C64XX_GPH8_I2S_V40_LRCLK (0x05 << 0) +#define S3C64XX_GPH8_ADDR_CF2 (0x06 << 0) +#define S3C64XX_GPH8_EINT_G6_8 (0x07 << 0) +#define S3C64XX_GPH9_OUTPUT (0x01 << 4) +#define S3C64XX_GPH9_MMC1_DATA7 (0x02 << 4) +#define S3C64XX_GPH9_MMC2_DATA3 (0x03 << 4) +#define S3C64XX_GPH9_I2S_V40_DI (0x05 << 4) +#define S3C64XX_GPH9_EINT_G6_9 (0x07 << 4) -- cgit v1.2.3 From beb9f4ed22ee618ffcf5064ff7d5ca4cfc83104b Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Thu, 7 May 2009 15:07:41 +0200 Subject: [ARM] S3C64XX: fix GPIO debug Fix compilation bug when debug was enabled Reviewed-by: Kyungmin Park Signed-off-by: Marek Szyprowski Signed-off-by: Ben Dooks --- arch/arm/plat-s3c64xx/gpiolib.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/plat-s3c64xx/gpiolib.c b/arch/arm/plat-s3c64xx/gpiolib.c index ee9188add8f..78ee52cffc9 100644 --- a/arch/arm/plat-s3c64xx/gpiolib.c +++ b/arch/arm/plat-s3c64xx/gpiolib.c @@ -57,7 +57,7 @@ #if 1 #define gpio_dbg(x...) do { } while(0) #else -#define gpio_dbg(x...) printk(KERN_DEBUG ## x) +#define gpio_dbg(x...) printk(KERN_DEBUG x) #endif /* The s3c64xx_gpiolib_4bit routines are to control the gpio banks where -- cgit v1.2.3 From 871fcd7cf791b853ae044f813db94caefbf66725 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 15 May 2009 14:20:53 +0100 Subject: [ARM] S3C24XX: Fix unused code warning in arch/arm/plat-s3c24xx/dma.c Fix unused code warning in arch/arm/plat-s3c24xx/dma.c if there is no PM support enabled. The function to_dma_chan() should be marked inline so that the compiler will eliminate it without warning if it isn't used. arch/arm/plat-s3c24xx/dma.c:1239: warning: 'to_dma_chan' defined but not used Signed-off-by: Ben Dooks --- arch/arm/plat-s3c24xx/dma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c index aee2aeb46c6..07326f63236 100644 --- a/arch/arm/plat-s3c24xx/dma.c +++ b/arch/arm/plat-s3c24xx/dma.c @@ -1235,7 +1235,7 @@ int s3c2410_dma_getposition(unsigned int channel, dma_addr_t *src, dma_addr_t *d EXPORT_SYMBOL(s3c2410_dma_getposition); -static struct s3c2410_dma_chan *to_dma_chan(struct sys_device *dev) +static inline struct s3c2410_dma_chan *to_dma_chan(struct sys_device *dev) { return container_of(dev, struct s3c2410_dma_chan, dev); } -- cgit v1.2.3 From a8af6de00fafed316fea8f39d87c7e8e19ec1ea0 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 15 May 2009 14:57:09 +0100 Subject: [ARM] S3C2410: mach-bast.c registering i2c data too early The BAST support code is calling s3c_i2c0_set_platdata() from the map_io() entry, instead of the bast_init() code. This causes the registration to fail due to kmalloc() not being available at the time. This fixes the following error: s3c_i2c0_set_platdata: no memory for platform data Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2410/mach-bast.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c index 4389c160f7d..8637dea5e15 100644 --- a/arch/arm/mach-s3c2410/mach-bast.c +++ b/arch/arm/mach-s3c2410/mach-bast.c @@ -588,8 +588,6 @@ static void __init bast_map_io(void) s3c_device_nand.dev.platform_data = &bast_nand_info; - s3c_i2c0_set_platdata(&bast_i2c_info); - s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc)); s3c24xx_init_clocks(0); s3c24xx_init_uarts(bast_uartcfgs, ARRAY_SIZE(bast_uartcfgs)); @@ -602,6 +600,7 @@ static void __init bast_init(void) sysdev_class_register(&bast_pm_sysclass); sysdev_register(&bast_pm_sysdev); + s3c_i2c0_set_platdata(&bast_i2c_info); s3c24xx_fb_set_platdata(&bast_fb_info); platform_add_devices(bast_devices, ARRAY_SIZE(bast_devices)); -- cgit v1.2.3 From 3ac19bb443255579b30f05af5e688b6c73b1bb91 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 15 May 2009 15:21:57 +0100 Subject: [ARM] S3C: Do not set clk->owner field if unset The s3c24xx_register_clock() function has been doing a test on clk->owner to see if it is NULL, and then setting itself as the owner if clk->owner == NULL. This is not needed, arch/arm/plat-s3c/clock.c cannot be compiled as a module, and even if it was, it should not be playing with this field if it being registered from somewhere else. The best course of action is to remove this bit of code completely. Signed-off-by: Ben Dooks --- arch/arm/plat-s3c/clock.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/arm/plat-s3c/clock.c b/arch/arm/plat-s3c/clock.c index b6be76e2fe5..4d01ef1a25d 100644 --- a/arch/arm/plat-s3c/clock.c +++ b/arch/arm/plat-s3c/clock.c @@ -306,8 +306,6 @@ struct clk s3c24xx_uclk = { int s3c24xx_register_clock(struct clk *clk) { - clk->owner = THIS_MODULE; - if (clk->enable == NULL) clk->enable = clk_null_enable; -- cgit v1.2.3 From 9a1a69a1f41cbefebf3172761f197db6aba71e68 Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Wed, 29 Apr 2009 13:12:39 -0500 Subject: [SCSI] fc-transport: Close state transition-window during rport deletion. Andrew Vasquez wrote: > fc-transport: Close state transition-window during rport deletion. > > After an rport's state has transitioned to FC_PORTSTATE_BLOCKED, > but, prior to making the upcall to 'block' the scsi-target > associated with an rport, queued commands can recycle and > ultimately run out of retries causing failures to propagate to > upper-level drivers. Close this transition-window by returning > the non-'retries' modifying DID_IMM_RETRY status for submitted > I/Os. The same can happen for iscsi when transitioning from logged in to failed and blocking the sdevs. This patch converts iscsi and fc's transitions back to use DID_IMM_RETRY instead of DID_TRANSPORT_DISRUPTED which has a limited number of retries that we do not want to use for handling this race. Signed-off-by: Andrew Vasquez [Addition of iscsi and fc port online devloss case conversion by Mike Christie] Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/scsi_transport_iscsi.c | 2 +- include/scsi/scsi_transport_fc.h | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c index 09479545529..0a2ce7b6325 100644 --- a/drivers/scsi/scsi_transport_iscsi.c +++ b/drivers/scsi/scsi_transport_iscsi.c @@ -357,7 +357,7 @@ int iscsi_session_chkready(struct iscsi_cls_session *session) err = 0; break; case ISCSI_SESSION_FAILED: - err = DID_TRANSPORT_DISRUPTED << 16; + err = DID_IMM_RETRY << 16; break; case ISCSI_SESSION_FREE: err = DID_TRANSPORT_FAILFAST << 16; diff --git a/include/scsi/scsi_transport_fc.h b/include/scsi/scsi_transport_fc.h index c9184f756ca..68a8d873bbd 100644 --- a/include/scsi/scsi_transport_fc.h +++ b/include/scsi/scsi_transport_fc.h @@ -680,7 +680,7 @@ fc_remote_port_chkready(struct fc_rport *rport) if (rport->roles & FC_PORT_ROLE_FCP_TARGET) result = 0; else if (rport->flags & FC_RPORT_DEVLOSS_PENDING) - result = DID_TRANSPORT_DISRUPTED << 16; + result = DID_IMM_RETRY << 16; else result = DID_NO_CONNECT << 16; break; @@ -688,7 +688,7 @@ fc_remote_port_chkready(struct fc_rport *rport) if (rport->flags & FC_RPORT_FAST_FAIL_TIMEDOUT) result = DID_TRANSPORT_FAILFAST << 16; else - result = DID_TRANSPORT_DISRUPTED << 16; + result = DID_IMM_RETRY << 16; break; default: result = DID_NO_CONNECT << 16; -- cgit v1.2.3 From 5e43754fd949193252ecb470d7fb08b547a1e310 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Thu, 30 Apr 2009 19:13:41 -0700 Subject: [SCSI] ses: fix problems caused by empty SES provided name We use the name provided by SES to name objects. An empty name is legal in SES but causes problems in our generic device hierarchy. Fix this by falling back to a number if the name is either NULL or empty. Also fix a secondary bug spotted in that dev_set_name(dev, name) uses a string format and so would go wrong if name contained a '%'. Signed-off-by: Yinghai Lu Signed-off-by: James Bottomley --- drivers/misc/enclosure.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/misc/enclosure.c b/drivers/misc/enclosure.c index 3cf61ece71d..348443bdb23 100644 --- a/drivers/misc/enclosure.c +++ b/drivers/misc/enclosure.c @@ -119,7 +119,7 @@ enclosure_register(struct device *dev, const char *name, int components, edev->edev.class = &enclosure_class; edev->edev.parent = get_device(dev); edev->cb = cb; - dev_set_name(&edev->edev, name); + dev_set_name(&edev->edev, "%s", name); err = device_register(&edev->edev); if (err) goto err; @@ -255,8 +255,8 @@ enclosure_component_register(struct enclosure_device *edev, ecomp->number = number; cdev = &ecomp->cdev; cdev->parent = get_device(&edev->edev); - if (name) - dev_set_name(cdev, name); + if (name && name[0]) + dev_set_name(cdev, "%s", name); else dev_set_name(cdev, "%u", number); -- cgit v1.2.3 From 8454e9888cb0316dd296fd5d47c612248ed5e1d1 Mon Sep 17 00:00:00 2001 From: adam radford Date: Tue, 5 May 2009 11:45:37 -0700 Subject: [SCSI] 3w-9xxx: scsi_dma_unmap fix This patch fixes the following regression the occurred during the scsi_dma_map()/unmap() changes: 3w-9xxx 0001:45:00.0: DMA-API: device driver tries to free DMA memory it has not allocated [device address=0x0000000000000000] [size=36 bytes] Signed-off-by: Adam Radford Signed-off-by: James Bottomley --- drivers/scsi/3w-9xxx.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/3w-9xxx.c b/drivers/scsi/3w-9xxx.c index 8b7983aba8f..36c21b19e5d 100644 --- a/drivers/scsi/3w-9xxx.c +++ b/drivers/scsi/3w-9xxx.c @@ -1978,7 +1978,8 @@ static void twa_unmap_scsi_data(TW_Device_Extension *tw_dev, int request_id) { struct scsi_cmnd *cmd = tw_dev->srb[request_id]; - scsi_dma_unmap(cmd); + if (cmd->SCp.phase == TW_PHASE_SGLIST) + scsi_dma_unmap(cmd); } /* End twa_unmap_scsi_data() */ /* scsi_host_template initializer */ -- cgit v1.2.3 From 7b14f58ad65f9d74e4273fb45360cfea824495aa Mon Sep 17 00:00:00 2001 From: adam radford Date: Mon, 11 May 2009 14:55:55 -0700 Subject: [SCSI] 3w-xxxx: scsi_dma_unmap fix This patch fixes the following regression that occurred during the scsi_dma_map()/unmap() changes when compiling with CONFIG_DMA_API_DEBUG=y : WARNING: at lib/dma-debug.c:496 check_unmap+0x142/0x542() Hardware name: 3w-xxxx 0000:02:02.0: DMA-API: device driver tries to free DMA memory it has not allocated [device address=0x0000000000000000] [size=36 bytes] Signed-off-by: Adam Radford Signed-off-by: James Bottomley --- drivers/scsi/3w-xxxx.c | 5 +++-- drivers/scsi/3w-xxxx.h | 2 +- 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/3w-xxxx.c b/drivers/scsi/3w-xxxx.c index c03f1d2c9e2..faa0fcfed71 100644 --- a/drivers/scsi/3w-xxxx.c +++ b/drivers/scsi/3w-xxxx.c @@ -6,7 +6,7 @@ Arnaldo Carvalho de Melo Brad Strand - Copyright (C) 1999-2007 3ware Inc. + Copyright (C) 1999-2009 3ware Inc. Kernel compatiblity By: Andre Hedrick Non-Copyright (C) 2000 Andre Hedrick @@ -1294,7 +1294,8 @@ static void tw_unmap_scsi_data(struct pci_dev *pdev, struct scsi_cmnd *cmd) { dprintk(KERN_WARNING "3w-xxxx: tw_unmap_scsi_data()\n"); - scsi_dma_unmap(cmd); + if (cmd->SCp.phase == TW_PHASE_SGLIST) + scsi_dma_unmap(cmd); } /* End tw_unmap_scsi_data() */ /* This function will reset a device extension */ diff --git a/drivers/scsi/3w-xxxx.h b/drivers/scsi/3w-xxxx.h index 8e71e5e122b..a5a2ba2561d 100644 --- a/drivers/scsi/3w-xxxx.h +++ b/drivers/scsi/3w-xxxx.h @@ -6,7 +6,7 @@ Arnaldo Carvalho de Melo Brad Strand - Copyright (C) 1999-2007 3ware Inc. + Copyright (C) 1999-2009 3ware Inc. Kernel compatiblity By: Andre Hedrick Non-Copyright (C) 2000 Andre Hedrick -- cgit v1.2.3 From 88fc86c283d9c3854e67e4155808027bc2519eb6 Mon Sep 17 00:00:00 2001 From: GeunSik Lim Date: Thu, 14 May 2009 17:23:38 +0900 Subject: tracing: Append prompt in /debug/tracing/README file append prompt in /debug/tracing/README file. This is trivial issue. Fix typo Mini Howto file(README) for ftrace. [ Impact: cleanup ] Signed-off-by: GeunSik Lim Acked-by: Steven Rostedt Cc: williams LKML-Reference: <1242289418.31161.45.camel@centos51> Signed-off-by: Ingo Molnar --- kernel/trace/trace.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index a884c09006c..cda81ec58d9 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -2380,7 +2380,7 @@ static const char readme_msg[] = "# echo print-parent > /debug/tracing/trace_options\n" "# echo 1 > /debug/tracing/tracing_enabled\n" "# cat /debug/tracing/trace > /tmp/trace.txt\n" - "echo 0 > /debug/tracing/tracing_enabled\n" + "# echo 0 > /debug/tracing/tracing_enabled\n" ; static ssize_t -- cgit v1.2.3 From b4ecc126991b30fe5f9a59dfacda046aeac124b2 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Wed, 13 May 2009 17:16:55 -0700 Subject: x86: Fix performance regression caused by paravirt_ops on native kernels Xiaohui Xin and some other folks at Intel have been looking into what's behind the performance hit of paravirt_ops when running native. It appears that the hit is entirely due to the paravirtualized spinlocks introduced by: | commit 8efcbab674de2bee45a2e4cdf97de16b8e609ac8 | Date: Mon Jul 7 12:07:51 2008 -0700 | | paravirt: introduce a "lock-byte" spinlock implementation The extra call/return in the spinlock path is somehow causing an increase in the cycles/instruction of somewhere around 2-7% (seems to vary quite a lot from test to test). The working theory is that the CPU's pipeline is getting upset about the call->call->locked-op->return->return, and seems to be failing to speculate (though I haven't seen anything definitive about the precise reasons). This doesn't entirely make sense, because the performance hit is also visible on unlock and other operations which don't involve locked instructions. But spinlock operations clearly swamp all the other pvops operations, even though I can't imagine that they're nearly as common (there's only a .05% increase in instructions executed). If I disable just the pv-spinlock calls, my tests show that pvops is identical to non-pvops performance on native (my measurements show that it is actually about .1% faster, but Xiaohui shows a .05% slowdown). Summary of results, averaging 10 runs of the "mmperf" test, using a no-pvops build as baseline: nopv Pv-nospin Pv-spin CPU cycles 100.00% 99.89% 102.18% instructions 100.00% 100.10% 100.15% CPI 100.00% 99.79% 102.03% cache ref 100.00% 100.84% 100.28% cache miss 100.00% 90.47% 88.56% cache miss rate 100.00% 89.72% 88.31% branches 100.00% 99.93% 100.04% branch miss 100.00% 103.66% 107.72% branch miss rt 100.00% 103.73% 107.67% wallclock 100.00% 99.90% 102.20% The clear effect here is that the 2% increase in CPI is directly reflected in the final wallclock time. (The other interesting effect is that the more ops are out of line calls via pvops, the lower the cache access and miss rates. Not too surprising, but it suggests that the non-pvops kernel is over-inlined. On the flipside, the branch misses go up correspondingly...) So, what's the fix? Paravirt patching turns all the pvops calls into direct calls, so _spin_lock etc do end up having direct calls. For example, the compiler generated code for paravirtualized _spin_lock is: <_spin_lock+0>: mov %gs:0xb4c8,%rax <_spin_lock+9>: incl 0xffffffffffffe044(%rax) <_spin_lock+15>: callq *0xffffffff805a5b30 <_spin_lock+22>: retq The indirect call will get patched to: <_spin_lock+0>: mov %gs:0xb4c8,%rax <_spin_lock+9>: incl 0xffffffffffffe044(%rax) <_spin_lock+15>: callq <__ticket_spin_lock> <_spin_lock+20>: nop; nop /* or whatever 2-byte nop */ <_spin_lock+22>: retq One possibility is to inline _spin_lock, etc, when building an optimised kernel (ie, when there's no spinlock/preempt instrumentation/debugging enabled). That will remove the outer call/return pair, returning the instruction stream to a single call/return, which will presumably execute the same as the non-pvops case. The downsides arel 1) it will replicate the preempt_disable/enable code at eack lock/unlock callsite; this code is fairly small, but not nothing; and 2) the spinlock definitions are already a very heavily tangled mass of #ifdefs and other preprocessor magic, and making any changes will be non-trivial. The other obvious answer is to disable pv-spinlocks. Making them a separate config option is fairly easy, and it would be trivial to enable them only when Xen is enabled (as the only non-default user). But it doesn't really address the common case of a distro build which is going to have Xen support enabled, and leaves the open question of whether the native performance cost of pv-spinlocks is worth the performance improvement on a loaded Xen system (10% saving of overall system CPU when guests block rather than spin). Still it is a reasonable short-term workaround. [ Impact: fix pvops performance regression when running native ] Analysed-by: "Xin Xiaohui" Analysed-by: "Li Xin" Analysed-by: "Nakajima Jun" Signed-off-by: Jeremy Fitzhardinge Acked-by: H. Peter Anvin Cc: Nick Piggin Cc: Xen-devel LKML-Reference: <4A0B62F7.5030802@goop.org> [ fixed the help text ] Signed-off-by: Ingo Molnar --- arch/x86/Kconfig | 13 +++++++++++++ arch/x86/include/asm/paravirt.h | 2 +- arch/x86/include/asm/spinlock.h | 4 ++-- arch/x86/kernel/Makefile | 3 ++- arch/x86/kernel/paravirt.c | 2 ++ arch/x86/xen/Makefile | 5 +++-- arch/x86/xen/xen-ops.h | 19 +++++++++++++++---- 7 files changed, 38 insertions(+), 10 deletions(-) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index df9e885eee1..a6efe0a2e9a 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -498,6 +498,19 @@ config PARAVIRT over full virtualization. However, when run without a hypervisor the kernel is theoretically slower and slightly larger. +config PARAVIRT_SPINLOCKS + bool "Paravirtualization layer for spinlocks" + depends on PARAVIRT && SMP && EXPERIMENTAL + ---help--- + Paravirtualized spinlocks allow a pvops backend to replace the + spinlock implementation with something virtualization-friendly + (for example, block the virtual CPU rather than spinning). + + Unfortunately the downside is an up to 5% performance hit on + native kernels, with various workloads. + + If you are unsure how to answer this question, answer N. + config PARAVIRT_CLOCK bool default n diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h index 378e3691c08..a53da004e08 100644 --- a/arch/x86/include/asm/paravirt.h +++ b/arch/x86/include/asm/paravirt.h @@ -1443,7 +1443,7 @@ u64 _paravirt_ident_64(u64); #define paravirt_nop ((void *)_paravirt_nop) -#ifdef CONFIG_SMP +#if defined(CONFIG_SMP) && defined(CONFIG_PARAVIRT_SPINLOCKS) static inline int __raw_spin_is_locked(struct raw_spinlock *lock) { diff --git a/arch/x86/include/asm/spinlock.h b/arch/x86/include/asm/spinlock.h index e5e6caffec8..b7e5db87639 100644 --- a/arch/x86/include/asm/spinlock.h +++ b/arch/x86/include/asm/spinlock.h @@ -172,7 +172,7 @@ static inline int __ticket_spin_is_contended(raw_spinlock_t *lock) return (((tmp >> TICKET_SHIFT) - tmp) & ((1 << TICKET_SHIFT) - 1)) > 1; } -#ifndef CONFIG_PARAVIRT +#ifndef CONFIG_PARAVIRT_SPINLOCKS static inline int __raw_spin_is_locked(raw_spinlock_t *lock) { @@ -206,7 +206,7 @@ static __always_inline void __raw_spin_lock_flags(raw_spinlock_t *lock, __raw_spin_lock(lock); } -#endif +#endif /* CONFIG_PARAVIRT_SPINLOCKS */ static inline void __raw_spin_unlock_wait(raw_spinlock_t *lock) { diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index 145cce75cda..88d1bfc847d 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -89,7 +89,8 @@ obj-$(CONFIG_DEBUG_NX_TEST) += test_nx.o obj-$(CONFIG_VMI) += vmi_32.o vmiclock_32.o obj-$(CONFIG_KVM_GUEST) += kvm.o obj-$(CONFIG_KVM_CLOCK) += kvmclock.o -obj-$(CONFIG_PARAVIRT) += paravirt.o paravirt_patch_$(BITS).o paravirt-spinlocks.o +obj-$(CONFIG_PARAVIRT) += paravirt.o paravirt_patch_$(BITS).o +obj-$(CONFIG_PARAVIRT_SPINLOCKS)+= paravirt-spinlocks.o obj-$(CONFIG_PARAVIRT_CLOCK) += pvclock.o obj-$(CONFIG_PCSPKR_PLATFORM) += pcspeaker.o diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c index 8e45f446488..9faf43bea33 100644 --- a/arch/x86/kernel/paravirt.c +++ b/arch/x86/kernel/paravirt.c @@ -134,7 +134,9 @@ static void *get_call_destination(u8 type) .pv_irq_ops = pv_irq_ops, .pv_apic_ops = pv_apic_ops, .pv_mmu_ops = pv_mmu_ops, +#ifdef CONFIG_PARAVIRT_SPINLOCKS .pv_lock_ops = pv_lock_ops, +#endif }; return *((void **)&tmpl + type); } diff --git a/arch/x86/xen/Makefile b/arch/x86/xen/Makefile index 3b767d03fd6..172438f86a0 100644 --- a/arch/x86/xen/Makefile +++ b/arch/x86/xen/Makefile @@ -9,5 +9,6 @@ obj-y := enlighten.o setup.o multicalls.o mmu.o irq.o \ time.o xen-asm.o xen-asm_$(BITS).o \ grant-table.o suspend.o -obj-$(CONFIG_SMP) += smp.o spinlock.o -obj-$(CONFIG_XEN_DEBUG_FS) += debugfs.o \ No newline at end of file +obj-$(CONFIG_SMP) += smp.o +obj-$(CONFIG_PARAVIRT_SPINLOCKS)+= spinlock.o +obj-$(CONFIG_XEN_DEBUG_FS) += debugfs.o diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h index 20139464943..ca6596b05d5 100644 --- a/arch/x86/xen/xen-ops.h +++ b/arch/x86/xen/xen-ops.h @@ -62,15 +62,26 @@ void xen_setup_vcpu_info_placement(void); #ifdef CONFIG_SMP void xen_smp_init(void); -void __init xen_init_spinlocks(void); -__cpuinit void xen_init_lock_cpu(int cpu); -void xen_uninit_lock_cpu(int cpu); - extern cpumask_var_t xen_cpu_initialized_map; #else static inline void xen_smp_init(void) {} #endif +#ifdef CONFIG_PARAVIRT_SPINLOCKS +void __init xen_init_spinlocks(void); +__cpuinit void xen_init_lock_cpu(int cpu); +void xen_uninit_lock_cpu(int cpu); +#else +static inline void xen_init_spinlocks(void) +{ +} +static inline void xen_init_lock_cpu(int cpu) +{ +} +static inline void xen_uninit_lock_cpu(int cpu) +{ +} +#endif /* Declare an asm function, along with symbols needed to make it inlineable */ -- cgit v1.2.3 From 4484079d517c2b6521621be0b1ea246ccc55c7d7 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Fri, 15 May 2009 23:30:50 +0200 Subject: PM: check sysdev_suspend(PMSG_FREEZE) return value Check the return value of sysdev_suspend(). I think this was a typo. Without this change, the following "if" check is always false. I also changed the error message so it's distinguishable from the similar message a few lines above. Signed-off-by: Bjorn Helgaas Acked-by: Pavel Machek Signed-off-by: Rafael J. Wysocki --- kernel/power/disk.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/kernel/power/disk.c b/kernel/power/disk.c index e71ca9cd81b..b0dc9e7a0d1 100644 --- a/kernel/power/disk.c +++ b/kernel/power/disk.c @@ -241,9 +241,9 @@ static int create_image(int platform_mode) local_irq_disable(); - sysdev_suspend(PMSG_FREEZE); + error = sysdev_suspend(PMSG_FREEZE); if (error) { - printk(KERN_ERR "PM: Some devices failed to power down, " + printk(KERN_ERR "PM: Some system devices failed to power down, " "aborting hibernation\n"); goto Enable_irqs; } -- cgit v1.2.3 From 975b3c474c13d29337eaf7da8f5f5c0299e4943f Mon Sep 17 00:00:00 2001 From: Lin Ming Date: Fri, 15 May 2009 22:27:49 -0400 Subject: ACPI: resume: re-enable SCI-enable workaround The BIOS bug workaround mistakenly got disabled when we followed the ACPI specification more closely by ignoring OS updates to that bit. (The BIOS is supposed to update SCI_EN, not the OS) http://bugzilla.kernel.org/show_bug.cgi?id=13289 Signed-off-by: Lin Ming Signed-off-by: Len Brown --- drivers/acpi/acpica/aclocal.h | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/acpi/acpica/aclocal.h b/drivers/acpi/acpica/aclocal.h index 772ee5c4ccc..2ec394a328e 100644 --- a/drivers/acpi/acpica/aclocal.h +++ b/drivers/acpi/acpica/aclocal.h @@ -787,7 +787,12 @@ struct acpi_bit_register_info { /* For control registers, both ignored and reserved bits must be preserved */ -#define ACPI_PM1_CONTROL_IGNORED_BITS 0x0201 /* Bits 9, 0(SCI_EN) */ +/* + * The ACPI spec says to ignore PM1_CTL.SCI_EN (bit 0) + * but we need to be able to write ACPI_BITREG_SCI_ENABLE directly + * as a BIOS workaround on some machines. + */ +#define ACPI_PM1_CONTROL_IGNORED_BITS 0x0200 /* Bits 9 */ #define ACPI_PM1_CONTROL_RESERVED_BITS 0xC1F8 /* Bits 14-15, 3-8 */ #define ACPI_PM1_CONTROL_PRESERVED_BITS \ (ACPI_PM1_CONTROL_IGNORED_BITS | ACPI_PM1_CONTROL_RESERVED_BITS) -- cgit v1.2.3 From 815ab0fd40579ad2aa42058298073503648762b9 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Thu, 7 May 2009 22:19:45 -0400 Subject: ACPI: suspend: restore BM_RLD on resume In 2.6.29, 31878dd86b7df9a147f5e6cc6e07092b4308782b "ACPI: remove BM_RLD access from idle entry path" moved BM_RLD initialization to init-time from run time. But we discovered that some BIOS do not restore BM_RLD after suspend, causing device errors on C3 and C4 after resume. So now the kernel restores BM_RLD. http://bugzilla.kernel.org/show_bug.cgi?id=13032 Signed-off-by: Len Brown --- drivers/acpi/processor_idle.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index f7ca8c55956..c1d59cfdb5f 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -202,15 +202,38 @@ static void acpi_state_timer_broadcast(struct acpi_processor *pr, * Suspend / resume control */ static int acpi_idle_suspend; +static u32 saved_bm_rld; + +static void acpi_idle_bm_rld_save(void) +{ + acpi_read_bit_register(ACPI_BITREG_BUS_MASTER_RLD, &saved_bm_rld); +} +static void acpi_idle_bm_rld_restore(void) +{ + u32 resumed_bm_rld; + + acpi_read_bit_register(ACPI_BITREG_BUS_MASTER_RLD, &resumed_bm_rld); + + if (resumed_bm_rld != saved_bm_rld) + acpi_write_bit_register(ACPI_BITREG_BUS_MASTER_RLD, saved_bm_rld); +} int acpi_processor_suspend(struct acpi_device * device, pm_message_t state) { + if (acpi_idle_suspend == 1) + return 0; + + acpi_idle_bm_rld_save(); acpi_idle_suspend = 1; return 0; } int acpi_processor_resume(struct acpi_device * device) { + if (acpi_idle_suspend == 0) + return 0; + + acpi_idle_bm_rld_restore(); acpi_idle_suspend = 0; return 0; } -- cgit v1.2.3 From ecb4aed78dcf09e48c8c34c8c2fa7f5c69344be6 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Fri, 24 Apr 2009 11:33:47 -0400 Subject: ACPI, i915: build fix drivers/built-in.o: In function `intel_opregion_init': (.text+0x9d540): undefined reference to `acpi_video_register' http://bugzilla.kernel.org/show_bug.cgi?id=13165 Signed-off-by: Len Brown --- drivers/gpu/drm/Kconfig | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig index 3a22eb9be37..f33d2527991 100644 --- a/drivers/gpu/drm/Kconfig +++ b/drivers/gpu/drm/Kconfig @@ -83,6 +83,12 @@ config DRM_I915 config DRM_I915_KMS bool "Enable modesetting on intel by default" depends on DRM_I915 + # i915 KMS depends on ACPI_VIDEO when ACPI is enabled + # but for select to work, need to select ACPI_VIDEO's dependencies, ick + select VIDEO_OUTPUT_CONTROL if ACPI + select BACKLIGHT_CLASS_DEVICE if ACPI + select INPUT if ACPI + select ACPI_VIDEO if ACPI help Choose this option if you want kernel modesetting enabled by default, and you have a new enough userspace to support this. Running old -- cgit v1.2.3 From 56c213fa012f2bad9eff908292ff2500f840b020 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Mon, 11 May 2009 09:35:57 +0800 Subject: ACPI processor: introduce module parameter processor.ignore_tpc Introduce module parameter processor.ignore_tpc. Some laptops are shipped with buggy _TPC, this module parameter is used to to disable the buggy support. http://bugzilla.kernel.org/show_bug.cgi?id=13259 Signed-off-by: Zhang Rui Tested-by: James Ettle Signed-off-by: Len Brown --- drivers/acpi/processor_throttling.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c index d0d1f4d5043..5f09fb8c0e0 100644 --- a/drivers/acpi/processor_throttling.c +++ b/drivers/acpi/processor_throttling.c @@ -45,6 +45,14 @@ #define _COMPONENT ACPI_PROCESSOR_COMPONENT ACPI_MODULE_NAME("processor_throttling"); +/* ignore_tpc: + * 0 -> acpi processor driver doesn't ignore _TPC values + * 1 -> acpi processor driver ignores _TPC values + */ +static int ignore_tpc; +module_param(ignore_tpc, int, 0644); +MODULE_PARM_DESC(ignore_tpc, "Disable broken BIOS _TPC throttling support"); + struct throttling_tstate { unsigned int cpu; /* cpu nr */ int target_state; /* target T-state */ @@ -283,6 +291,10 @@ static int acpi_processor_get_platform_limit(struct acpi_processor *pr) if (!pr) return -EINVAL; + + if (ignore_tpc) + goto end; + status = acpi_evaluate_integer(pr->handle, "_TPC", NULL, &tpc); if (ACPI_FAILURE(status)) { if (status != AE_NOT_FOUND) { @@ -290,6 +302,8 @@ static int acpi_processor_get_platform_limit(struct acpi_processor *pr) } return -ENODEV; } + +end: pr->throttling_platform_limit = (int)tpc; return 0; } @@ -302,6 +316,9 @@ int acpi_processor_tstate_has_changed(struct acpi_processor *pr) struct acpi_processor_limit *limit; int target_state; + if (ignore_tpc) + return 0; + result = acpi_processor_get_platform_limit(pr); if (result) { /* Throttling Limit is unsupported */ -- cgit v1.2.3 From 4973b22aa8c70fe036e3e0039f104cf5bb7fe2b1 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Mon, 11 May 2009 09:36:01 +0800 Subject: ACPI processor: reset the throttling state once it's invalid If the BIOS hands us an invalid throttling state, write a valid state. http://bugzilla.kernel.org/show_bug.cgi?id=13259 Signed-off-by: Zhang Rui Tested-by: James Ettle Signed-off-by: Len Brown --- drivers/acpi/processor_throttling.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c index 5f09fb8c0e0..7f16f5f8e7d 100644 --- a/drivers/acpi/processor_throttling.c +++ b/drivers/acpi/processor_throttling.c @@ -838,6 +838,14 @@ static int acpi_processor_get_throttling_ptc(struct acpi_processor *pr) ret = acpi_read_throttling_status(pr, &value); if (ret >= 0) { state = acpi_get_throttling_state(pr, value); + if (state == -1) { + ACPI_WARNING((AE_INFO, + "Invalid throttling state, reset\n")); + state = 0; + ret = acpi_processor_set_throttling(pr, state); + if (ret) + return ret; + } pr->throttling.state = state; } -- cgit v1.2.3 From 520daf7217bc1806c02eb4cfa7805447a3da2f66 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Thu, 14 May 2009 17:27:38 -0400 Subject: ACPI: idle: fix init-time TSC check regression A previous 2.6.30 patch, a71e4917dc0ebbcb5a0ecb7ca3486643c1c9a6e2, (ACPI: idle: mark_tsc_unstable() at init-time, not run-time) erroneously disabled the TSC on systems that did not actually have valid deep C-states. Move the check after the deep-C-states are validated, via new helper, tsc_check_state(), hich replaces tsc_halts_in_c(). Signed-off-by: Len Brown Acked-by: Venkatesh Pallipadi Acked-by: Thomas Gleixner Tested-by: Frans Pop --- drivers/acpi/processor_idle.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index f7ca8c55956..e39a40a2cea 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -216,7 +216,7 @@ int acpi_processor_resume(struct acpi_device * device) } #if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86) -static int tsc_halts_in_c(int state) +static void tsc_check_state(int state) { switch (boot_cpu_data.x86_vendor) { case X86_VENDOR_AMD: @@ -226,13 +226,17 @@ static int tsc_halts_in_c(int state) * C/P/S0/S1 states when this bit is set. */ if (boot_cpu_has(X86_FEATURE_NONSTOP_TSC)) - return 0; + return; /*FALL THROUGH*/ default: - return state > ACPI_STATE_C1; + /* TSC could halt in idle, so notify users */ + if (state > ACPI_STATE_C1) + mark_tsc_unstable("TSC halts in idle"); } } +#else +static void tsc_check_state(int state) { return; } #endif static int acpi_processor_get_power_info_fadt(struct acpi_processor *pr) @@ -581,11 +585,6 @@ static int acpi_processor_power_verify(struct acpi_processor *pr) for (i = 1; i < ACPI_PROCESSOR_MAX_POWER; i++) { struct acpi_processor_cx *cx = &pr->power.states[i]; -#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86) - /* TSC could halt in idle, so notify users */ - if (tsc_halts_in_c(cx->type)) - mark_tsc_unstable("TSC halts in idle");; -#endif switch (cx->type) { case ACPI_STATE_C1: cx->valid = 1; @@ -603,6 +602,8 @@ static int acpi_processor_power_verify(struct acpi_processor *pr) acpi_timer_check_state(i, pr, cx); break; } + if (cx->valid) + tsc_check_state(cx->type); if (cx->valid) working++; -- cgit v1.2.3 From a0bf284bfedd6dc95bbee7ebf5ccf3b5f753a008 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Fri, 15 May 2009 01:29:31 -0400 Subject: ACPI: Idle C-states disabled by max_cstate should not disable the TSC Processor idle power states C2 and C3 stop the TSC on many machines. Linux recognizes this situation and marks the TSC as unstable: Marking TSC unstable due to TSC halts in idle But if those same machines are booted with "processor.max_cstate=1", then there is no need to validate C2 and C3, and no need to disable the TSC, which can be reliably used as a clocksource. Signed-off-by: Len Brown Acked-by: Thomas Gleixner --- drivers/acpi/processor_idle.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index e39a40a2cea..e65476fdf40 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -582,7 +582,7 @@ static int acpi_processor_power_verify(struct acpi_processor *pr) pr->power.timer_broadcast_on_state = INT_MAX; - for (i = 1; i < ACPI_PROCESSOR_MAX_POWER; i++) { + for (i = 1; i < ACPI_PROCESSOR_MAX_POWER && i <= max_cstate; i++) { struct acpi_processor_cx *cx = &pr->power.states[i]; switch (cx->type) { -- cgit v1.2.3 From e102657ed16bbed49820d9c58509220fc8d9289a Mon Sep 17 00:00:00 2001 From: Vikram Pandita Date: Sat, 16 May 2009 08:28:16 -0700 Subject: ARM: OMAP3: Fix number of GPIO lines for 34xx As per 3430 TRM, there are 6 banks [0 to 191] Signed-off-by: Tom Rix Signed-off-by: Vikram Pandita Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/gpio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 17d7afe42b8..ee0b21f5b09 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -307,7 +307,7 @@ static inline int gpio_valid(int gpio) return 0; if (cpu_is_omap24xx() && gpio < 128) return 0; - if (cpu_is_omap34xx() && gpio < 160) + if (cpu_is_omap34xx() && gpio < 192) return 0; return -1; } -- cgit v1.2.3 From 8dbe43930a4e9bede88eb67a9c613773a2747caf Mon Sep 17 00:00:00 2001 From: Kalle Jokiniemi Date: Sat, 16 May 2009 08:28:17 -0700 Subject: ARM: OMAP3: Fix HW SAVEANDRESTORE shift define The OMAP3430ES2_SAVEANDRESTORE_SHIFT macro is used by powerdomain code in "1 << OMAP3430ES2_SAVEANDRESTORE_SHIFT" manner, but the definition was also (1 << 4), meaning we actually modified bit 16. So the definition needs to be 4. This fixes also a cold reset HW bug in OMAP3430 ES3.x where some of the efuse bits are not isolated during wake-up from off mode. This can cause randomish cold resets with off mode. Enabling the USBTLL hardware SAVEANDRESTORE causes the core power up assert to be delayed in a way that we will not get faulty values when boot ROM is reading the unisolated registers. Signed-off-by: Kalle Jokiniemi Acked-by: Kevin Hilman Acked-by: Paul Walmsley Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/prm-regbits-34xx.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/prm-regbits-34xx.h b/arch/arm/mach-omap2/prm-regbits-34xx.h index c6a7940f428..9fd03a2ec95 100644 --- a/arch/arm/mach-omap2/prm-regbits-34xx.h +++ b/arch/arm/mach-omap2/prm-regbits-34xx.h @@ -409,7 +409,7 @@ /* PM_PREPWSTST_CAM specific bits */ /* PM_PWSTCTRL_USBHOST specific bits */ -#define OMAP3430ES2_SAVEANDRESTORE_SHIFT (1 << 4) +#define OMAP3430ES2_SAVEANDRESTORE_SHIFT 4 /* RM_RSTST_PER specific bits */ -- cgit v1.2.3 From 005187eecaa400b4b43d9f640fbde9fcc50f37c1 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Sat, 16 May 2009 08:28:17 -0700 Subject: ARM: OMAP2/3: Change omapfb to use clkdev for dispc and rfbi, v2 This makes the framebuffer work on omap3. Also fix the clk_get usage for checkpatch.pl "ERROR: do not use assignment in if condition". Cc: Imre Deak Cc: linux-fbdev-devel@lists.sourceforge.net Acked-by: Krzysztof Helt Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/clock24xx.c | 8 ++++---- arch/arm/mach-omap2/clock34xx.c | 10 +++++----- drivers/video/omap/dispc.c | 14 ++++++++------ drivers/video/omap/rfbi.c | 8 +++++--- 4 files changed, 22 insertions(+), 18 deletions(-) diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c index ff9b4c0b00a..e4cef333e29 100644 --- a/arch/arm/mach-omap2/clock24xx.c +++ b/arch/arm/mach-omap2/clock24xx.c @@ -103,10 +103,10 @@ static struct omap_clk omap24xx_clks[] = { CLK(NULL, "mdm_ick", &mdm_ick, CK_243X), CLK(NULL, "mdm_osc_ck", &mdm_osc_ck, CK_243X), /* DSS domain clocks */ - CLK(NULL, "dss_ick", &dss_ick, CK_243X | CK_242X), - CLK(NULL, "dss1_fck", &dss1_fck, CK_243X | CK_242X), - CLK(NULL, "dss2_fck", &dss2_fck, CK_243X | CK_242X), - CLK(NULL, "dss_54m_fck", &dss_54m_fck, CK_243X | CK_242X), + CLK("omapfb", "ick", &dss_ick, CK_243X | CK_242X), + CLK("omapfb", "dss1_fck", &dss1_fck, CK_243X | CK_242X), + CLK("omapfb", "dss2_fck", &dss2_fck, CK_243X | CK_242X), + CLK("omapfb", "tv_fck", &dss_54m_fck, CK_243X | CK_242X), /* L3 domain clocks */ CLK(NULL, "core_l3_ck", &core_l3_ck, CK_243X | CK_242X), CLK(NULL, "ssi_fck", &ssi_ssr_sst_fck, CK_243X | CK_242X), diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c index a0575393d0e..ba05aa42bd8 100644 --- a/arch/arm/mach-omap2/clock34xx.c +++ b/arch/arm/mach-omap2/clock34xx.c @@ -197,11 +197,11 @@ static struct omap_clk omap34xx_clks[] = { CLK("omap_rng", "ick", &rng_ick, CK_343X), CLK(NULL, "sha11_ick", &sha11_ick, CK_343X), CLK(NULL, "des1_ick", &des1_ick, CK_343X), - CLK(NULL, "dss1_alwon_fck", &dss1_alwon_fck, CK_343X), - CLK(NULL, "dss_tv_fck", &dss_tv_fck, CK_343X), - CLK(NULL, "dss_96m_fck", &dss_96m_fck, CK_343X), - CLK(NULL, "dss2_alwon_fck", &dss2_alwon_fck, CK_343X), - CLK(NULL, "dss_ick", &dss_ick, CK_343X), + CLK("omapfb", "dss1_fck", &dss1_alwon_fck, CK_343X), + CLK("omapfb", "tv_fck", &dss_tv_fck, CK_343X), + CLK("omapfb", "video_fck", &dss_96m_fck, CK_343X), + CLK("omapfb", "dss2_fck", &dss2_alwon_fck, CK_343X), + CLK("omapfb", "ick", &dss_ick, CK_343X), CLK(NULL, "cam_mclk", &cam_mclk, CK_343X), CLK(NULL, "cam_ick", &cam_ick, CK_343X), CLK(NULL, "csi2_96m_fck", &csi2_96m_fck, CK_343X), diff --git a/drivers/video/omap/dispc.c b/drivers/video/omap/dispc.c index dfb72f5e4c9..148cbcc3960 100644 --- a/drivers/video/omap/dispc.c +++ b/drivers/video/omap/dispc.c @@ -880,20 +880,22 @@ static irqreturn_t omap_dispc_irq_handler(int irq, void *dev) static int get_dss_clocks(void) { - if (IS_ERR((dispc.dss_ick = clk_get(dispc.fbdev->dev, "dss_ick")))) { - dev_err(dispc.fbdev->dev, "can't get dss_ick\n"); + dispc.dss_ick = clk_get(dispc.fbdev->dev, "ick"); + if (IS_ERR(dispc.dss_ick)) { + dev_err(dispc.fbdev->dev, "can't get ick\n"); return PTR_ERR(dispc.dss_ick); } - if (IS_ERR((dispc.dss1_fck = clk_get(dispc.fbdev->dev, "dss1_fck")))) { + dispc.dss1_fck = clk_get(dispc.fbdev->dev, "dss1_fck"); + if (IS_ERR(dispc.dss1_fck)) { dev_err(dispc.fbdev->dev, "can't get dss1_fck\n"); clk_put(dispc.dss_ick); return PTR_ERR(dispc.dss1_fck); } - if (IS_ERR((dispc.dss_54m_fck = - clk_get(dispc.fbdev->dev, "dss_54m_fck")))) { - dev_err(dispc.fbdev->dev, "can't get dss_54m_fck\n"); + dispc.dss_54m_fck = clk_get(dispc.fbdev->dev, "tv_fck"); + if (IS_ERR(dispc.dss_54m_fck)) { + dev_err(dispc.fbdev->dev, "can't get tv_fck\n"); clk_put(dispc.dss_ick); clk_put(dispc.dss1_fck); return PTR_ERR(dispc.dss_54m_fck); diff --git a/drivers/video/omap/rfbi.c b/drivers/video/omap/rfbi.c index a13c8dcad2a..9332d6ca645 100644 --- a/drivers/video/omap/rfbi.c +++ b/drivers/video/omap/rfbi.c @@ -83,12 +83,14 @@ static inline u32 rfbi_read_reg(int idx) static int rfbi_get_clocks(void) { - if (IS_ERR((rfbi.dss_ick = clk_get(rfbi.fbdev->dev, "dss_ick")))) { - dev_err(rfbi.fbdev->dev, "can't get dss_ick\n"); + rfbi.dss_ick = clk_get(rfbi.fbdev->dev, "ick"); + if (IS_ERR(rfbi.dss_ick)) { + dev_err(rfbi.fbdev->dev, "can't get ick\n"); return PTR_ERR(rfbi.dss_ick); } - if (IS_ERR((rfbi.dss1_fck = clk_get(rfbi.fbdev->dev, "dss1_fck")))) { + rfbi.dss1_fck = clk_get(rfbi.fbdev->dev, "dss1_fck"); + if (IS_ERR(rfbi.dss1_fck)) { dev_err(rfbi.fbdev->dev, "can't get dss1_fck\n"); clk_put(rfbi.dss_ick); return PTR_ERR(rfbi.dss1_fck); -- cgit v1.2.3 From 36999a5af1b6c5379e59f0ddf434db08d03c19e4 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 19 Apr 2009 07:00:41 +0900 Subject: ide-tape: remove back-to-back REQUEST_SENSE detection Impact: fix an oops which always triggers ide_tape_issue_pc() assumed drive->pc isn't NULL on invocation when checking for back-to-back request sense issues but drive->pc can be NULL and even when it's not NULL, it's not safe to dereference it once the previous command is complete because pc could have been freed or was on stack. Kill back-to-back REQUEST_SENSE detection. Signed-off-by: Tejun Heo Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-tape.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index cb942a9b580..3a53e0834cf 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -614,12 +614,6 @@ static ide_startstop_t ide_tape_issue_pc(ide_drive_t *drive, { idetape_tape_t *tape = drive->driver_data; - if (drive->pc->c[0] == REQUEST_SENSE && - pc->c[0] == REQUEST_SENSE) { - printk(KERN_ERR "ide-tape: possible ide-tape.c bug - " - "Two request sense in serial were issued\n"); - } - if (drive->failed_pc == NULL && pc->c[0] != REQUEST_SENSE) drive->failed_pc = pc; -- cgit v1.2.3 From b019447ce73513432af052f30fa239d6dc93e111 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Sat, 16 May 2009 19:03:36 +0200 Subject: icside: register second channel of version 6 PCB The second IDE channel of version 6 PCB is not being registered anymore since the commit 48c3c1072651922ed153bcf0a33ea82cf20df390 (ide: add struct ide_host (take 3)). Signed-off-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/icside.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ide/icside.c b/drivers/ide/icside.c index 4e16ce68b06..36da913cc55 100644 --- a/drivers/ide/icside.c +++ b/drivers/ide/icside.c @@ -466,7 +466,7 @@ icside_register_v6(struct icside_state *state, struct expansion_card *ec) struct ide_host *host; unsigned int sel = 0; int ret; - hw_regs_t hw[2], *hws[] = { &hw[0], NULL, NULL, NULL }; + hw_regs_t hw[2], *hws[] = { &hw[0], &hw[1], NULL, NULL }; struct ide_port_info d = icside_v6_port_info; ioc_base = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, 0); -- cgit v1.2.3 From d8788298d491ee5026981eb751b0341a996b22e4 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Sat, 16 May 2009 19:03:36 +0200 Subject: piix: The Sony TZ90 needs the cable type hardcoding The Sony TZ90 needs the cable type hardcoding. See bug #12734 Signed-off-by: Alan Cox Reported-by: Jonathan E. Snow [bart: port it from ata_piix to piix and give reporter the proper credit] Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/piix.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/ide/piix.c b/drivers/ide/piix.c index 2aa69993306..69860dea382 100644 --- a/drivers/ide/piix.c +++ b/drivers/ide/piix.c @@ -263,6 +263,7 @@ static const struct ich_laptop ich_laptop[] = { { 0x24CA, 0x1025, 0x003d }, /* ICH4 on ACER TM290 */ { 0x266F, 0x1025, 0x0066 }, /* ICH6 on ACER Aspire 1694WLMi */ { 0x2653, 0x1043, 0x82D8 }, /* ICH6M on Asus Eee 701 */ + { 0x27df, 0x104d, 0x900e }, /* ICH7 on Sony TZ-90 */ /* end marker */ { 0, } }; -- cgit v1.2.3 From ff05c0330b9880f9ccbb7fa40f2ed3b5842f5693 Mon Sep 17 00:00:00 2001 From: Hartley Sweeten Date: Thu, 7 May 2009 18:41:47 +0100 Subject: [ARM] 5509/1: ep93xx: clkdev enable UARTS Fix the clkdev API support for the ep93xx uart clocks. The uarts available in the ep93xx have individual clock controls. The current implementation assumes that the bootloader has enabled the clocks before the kernel has booted. It also assumes that the bootloader has set the UARTBAUD bit indicating that the uarts are running off the 14.7456MHz external crystal. This fixes both issues. It also allows the uart clocks to be stopped when there are no users. Tested-by: Matthias Kaehlcke Cc: Ryan Mallon Signed-off-by: H Hartley Sweeten Signed-off-by: Russell King --- arch/arm/mach-ep93xx/clock.c | 69 ++++++++++++++++++++++--- arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h | 5 +- 2 files changed, 65 insertions(+), 9 deletions(-) diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c index e8ebeaea6c4..b2eede5531c 100644 --- a/arch/arm/mach-ep93xx/clock.c +++ b/arch/arm/mach-ep93xx/clock.c @@ -21,15 +21,50 @@ #include #include + +/* + * The EP93xx has two external crystal oscillators. To generate the + * required high-frequency clocks, the processor uses two phase-locked- + * loops (PLLs) to multiply the incoming external clock signal to much + * higher frequencies that are then divided down by programmable dividers + * to produce the needed clocks. The PLLs operate independently of one + * another. + */ +#define EP93XX_EXT_CLK_RATE 14745600 +#define EP93XX_EXT_RTC_RATE 32768 + + struct clk { unsigned long rate; int users; + int sw_locked; u32 enable_reg; u32 enable_mask; + + unsigned long (*get_rate)(struct clk *clk); }; -static struct clk clk_uart = { - .rate = 14745600, + +static unsigned long get_uart_rate(struct clk *clk); + + +static struct clk clk_uart1 = { + .sw_locked = 1, + .enable_reg = EP93XX_SYSCON_DEVICE_CONFIG, + .enable_mask = EP93XX_SYSCON_DEVICE_CONFIG_U1EN, + .get_rate = get_uart_rate, +}; +static struct clk clk_uart2 = { + .sw_locked = 1, + .enable_reg = EP93XX_SYSCON_DEVICE_CONFIG, + .enable_mask = EP93XX_SYSCON_DEVICE_CONFIG_U2EN, + .get_rate = get_uart_rate, +}; +static struct clk clk_uart3 = { + .sw_locked = 1, + .enable_reg = EP93XX_SYSCON_DEVICE_CONFIG, + .enable_mask = EP93XX_SYSCON_DEVICE_CONFIG_U3EN, + .get_rate = get_uart_rate, }; static struct clk clk_pll1; static struct clk clk_f; @@ -95,9 +130,9 @@ static struct clk clk_m2m1 = { { .dev_id = dev, .con_id = con, .clk = ck } static struct clk_lookup clocks[] = { - INIT_CK("apb:uart1", NULL, &clk_uart), - INIT_CK("apb:uart2", NULL, &clk_uart), - INIT_CK("apb:uart3", NULL, &clk_uart), + INIT_CK("apb:uart1", NULL, &clk_uart1), + INIT_CK("apb:uart2", NULL, &clk_uart2), + INIT_CK("apb:uart3", NULL, &clk_uart3), INIT_CK(NULL, "pll1", &clk_pll1), INIT_CK(NULL, "fclk", &clk_f), INIT_CK(NULL, "hclk", &clk_h), @@ -125,6 +160,8 @@ int clk_enable(struct clk *clk) u32 value; value = __raw_readl(clk->enable_reg); + if (clk->sw_locked) + __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK); __raw_writel(value | clk->enable_mask, clk->enable_reg); } @@ -138,13 +175,29 @@ void clk_disable(struct clk *clk) u32 value; value = __raw_readl(clk->enable_reg); + if (clk->sw_locked) + __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK); __raw_writel(value & ~clk->enable_mask, clk->enable_reg); } } EXPORT_SYMBOL(clk_disable); +static unsigned long get_uart_rate(struct clk *clk) +{ + u32 value; + + value = __raw_readl(EP93XX_SYSCON_CLOCK_CONTROL); + if (value & EP93XX_SYSCON_CLOCK_UARTBAUD) + return EP93XX_EXT_CLK_RATE; + else + return EP93XX_EXT_CLK_RATE / 2; +} + unsigned long clk_get_rate(struct clk *clk) { + if (clk->get_rate) + return clk->get_rate(clk); + return clk->rate; } EXPORT_SYMBOL(clk_get_rate); @@ -162,7 +215,7 @@ static unsigned long calc_pll_rate(u32 config_word) unsigned long long rate; int i; - rate = 14745600; + rate = EP93XX_EXT_CLK_RATE; rate *= ((config_word >> 11) & 0x1f) + 1; /* X1FBD */ rate *= ((config_word >> 5) & 0x3f) + 1; /* X2FBD */ do_div(rate, (config_word & 0x1f) + 1); /* X2IPD */ @@ -195,7 +248,7 @@ static int __init ep93xx_clock_init(void) value = __raw_readl(EP93XX_SYSCON_CLOCK_SET1); if (!(value & 0x00800000)) { /* PLL1 bypassed? */ - clk_pll1.rate = 14745600; + clk_pll1.rate = EP93XX_EXT_CLK_RATE; } else { clk_pll1.rate = calc_pll_rate(value); } @@ -206,7 +259,7 @@ static int __init ep93xx_clock_init(void) value = __raw_readl(EP93XX_SYSCON_CLOCK_SET2); if (!(value & 0x00080000)) { /* PLL2 bypassed? */ - clk_pll2.rate = 14745600; + clk_pll2.rate = EP93XX_EXT_CLK_RATE; } else if (value & 0x00040000) { /* PLL2 enabled? */ clk_pll2.rate = calc_pll_rate(value); } else { diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h index f66be12b856..1732de7629a 100644 --- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h +++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h @@ -159,7 +159,10 @@ #define EP93XX_SYSCON_CLOCK_SET1 EP93XX_SYSCON_REG(0x20) #define EP93XX_SYSCON_CLOCK_SET2 EP93XX_SYSCON_REG(0x24) #define EP93XX_SYSCON_DEVICE_CONFIG EP93XX_SYSCON_REG(0x80) -#define EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE 0x00800000 +#define EP93XX_SYSCON_DEVICE_CONFIG_U3EN (1<<24) +#define EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE (1<<23) +#define EP93XX_SYSCON_DEVICE_CONFIG_U2EN (1<<20) +#define EP93XX_SYSCON_DEVICE_CONFIG_U1EN (1<<18) #define EP93XX_SYSCON_SWLOCK EP93XX_SYSCON_REG(0xc0) #define EP93XX_WATCHDOG_BASE (EP93XX_APB_VIRT_BASE + 0x00140000) -- cgit v1.2.3 From 776abac81764847338a6a02c34609d4b8dfb4918 Mon Sep 17 00:00:00 2001 From: Ricardo Martins Date: Mon, 11 May 2009 00:15:08 +0100 Subject: [ARM] 5513/1: Eurotech VIPER SBC: fix compilation error Compilation for this board yields the following errors: arch/arm/mach-pxa/viper.c:511: error: 'FFUART' undeclared here (not in a function) arch/arm/mach-pxa/viper.c:520: error: 'BTUART' undeclared here (not in a function) arch/arm/mach-pxa/viper.c:529: error: 'STUART' undeclared here (not in a function) Fix them by including the necessary header. Signed-off-by: Ricardo Martins Signed-off-by: Russell King --- arch/arm/mach-pxa/viper.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c index 0e65344e9f5..dd031cc4184 100644 --- a/arch/arm/mach-pxa/viper.c +++ b/arch/arm/mach-pxa/viper.c @@ -46,6 +46,7 @@ #include #include #include +#include #include #include -- cgit v1.2.3 From 0f6f49a8cd0163fdb1723ed29f01fc65177108dc Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 May 2009 13:41:28 -0700 Subject: Fix caller information for warn_slowpath_null Ian Campbell noticed that since "Eliminate thousands of warnings with gcc 3.2 build" (commit 57adc4d2dbf968fdbe516359688094eef4d46581) all WARN_ON()'s currently appear to come from warn_slowpath_null(), eg: WARNING: at kernel/softirq.c:143 warn_slowpath_null+0x1c/0x20() because now that warn_slowpath_null() is in the call path, the __builtin_return_address(0) returns that, rather than the place that caused the warning. Fix this by splitting up the warn_slowpath_null/fmt cases differently, using a common helper function, and getting the return address in the right place. This also happens to avoid the unnecessary stack usage for the non-stdargs case, and just generally cleans things up. Make the function name printout use %pS while at it. Cc: Ian Campbell Cc: Jesper Nilsson Cc: Johannes Weiner Cc: Arjan van de Ven Cc: Andi Kleen Cc: Hugh Dickins Cc: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/panic.c | 35 ++++++++++++++++++++--------------- 1 file changed, 20 insertions(+), 15 deletions(-) diff --git a/kernel/panic.c b/kernel/panic.c index 874ecf1307a..984b3ecbd72 100644 --- a/kernel/panic.c +++ b/kernel/panic.c @@ -340,39 +340,44 @@ void oops_exit(void) } #ifdef WANT_WARN_ON_SLOWPATH -void warn_slowpath_fmt(const char *file, int line, const char *fmt, ...) -{ +struct slowpath_args { + const char *fmt; va_list args; - char function[KSYM_SYMBOL_LEN]; - unsigned long caller = (unsigned long)__builtin_return_address(0); - const char *board; +}; - sprint_symbol(function, caller); +static void warn_slowpath_common(const char *file, int line, void *caller, struct slowpath_args *args) +{ + const char *board; printk(KERN_WARNING "------------[ cut here ]------------\n"); - printk(KERN_WARNING "WARNING: at %s:%d %s()\n", file, - line, function); + printk(KERN_WARNING "WARNING: at %s:%d %pS()\n", file, line, caller); board = dmi_get_system_info(DMI_PRODUCT_NAME); if (board) printk(KERN_WARNING "Hardware name: %s\n", board); - if (*fmt) { - va_start(args, fmt); - vprintk(fmt, args); - va_end(args); - } + if (args) + vprintk(args->fmt, args->args); print_modules(); dump_stack(); print_oops_end_marker(); add_taint(TAINT_WARN); } + +void warn_slowpath_fmt(const char *file, int line, const char *fmt, ...) +{ + struct slowpath_args args; + + args.fmt = fmt; + va_start(args.args, fmt); + warn_slowpath_common(file, line, __builtin_return_address(0), &args); + va_end(args.args); +} EXPORT_SYMBOL(warn_slowpath_fmt); void warn_slowpath_null(const char *file, int line) { - static const char *empty = ""; - warn_slowpath_fmt(file, line, empty); + warn_slowpath_common(file, line, __builtin_return_address(0), NULL); } EXPORT_SYMBOL(warn_slowpath_null); #endif -- cgit v1.2.3 From 826681043d7184b4d650cab5b007b9a86b628eb5 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 17 May 2009 16:20:18 +0100 Subject: [ARM] smp: fix cpumask usage in ARM SMP code The ARM SMP code wasn't properly updated for the cpumask changes, which results in smp_timer_broadcast() broadcasting ticks to non-online CPUs. Signed-off-by: Russell King --- arch/arm/common/gic.c | 4 +-- arch/arm/include/asm/hardware/gic.h | 2 +- arch/arm/include/asm/smp.h | 12 +++----- arch/arm/kernel/smp.c | 46 +++++++++++-------------------- arch/arm/mach-realview/include/mach/smp.h | 6 ++-- arch/arm/mach-realview/platsmp.c | 4 +-- 6 files changed, 28 insertions(+), 46 deletions(-) diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c index c6884ba1d5e..3e1714c6523 100644 --- a/arch/arm/common/gic.c +++ b/arch/arm/common/gic.c @@ -253,9 +253,9 @@ void __cpuinit gic_cpu_init(unsigned int gic_nr, void __iomem *base) } #ifdef CONFIG_SMP -void gic_raise_softirq(cpumask_t cpumask, unsigned int irq) +void gic_raise_softirq(const struct cpumask *mask, unsigned int irq) { - unsigned long map = *cpus_addr(cpumask); + unsigned long map = *cpus_addr(*mask); /* this always happens on GIC0 */ writel(map << 16 | irq, gic_data[0].dist_base + GIC_DIST_SOFTINT); diff --git a/arch/arm/include/asm/hardware/gic.h b/arch/arm/include/asm/hardware/gic.h index 4924914af18..7f34333bb54 100644 --- a/arch/arm/include/asm/hardware/gic.h +++ b/arch/arm/include/asm/hardware/gic.h @@ -36,7 +36,7 @@ void gic_dist_init(unsigned int gic_nr, void __iomem *base, unsigned int irq_start); void gic_cpu_init(unsigned int gic_nr, void __iomem *base); void gic_cascade_irq(unsigned int gic_nr, unsigned int irq); -void gic_raise_softirq(cpumask_t cpumask, unsigned int irq); +void gic_raise_softirq(const struct cpumask *mask, unsigned int irq); #endif #endif diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h index fad70da5911..5995935338e 100644 --- a/arch/arm/include/asm/smp.h +++ b/arch/arm/include/asm/smp.h @@ -53,17 +53,12 @@ extern void smp_store_cpu_info(unsigned int cpuid); /* * Raise an IPI cross call on CPUs in callmap. */ -extern void smp_cross_call(cpumask_t callmap); - -/* - * Broadcast a timer interrupt to the other CPUs. - */ -extern void smp_send_timer(void); +extern void smp_cross_call(const struct cpumask *mask); /* * Broadcast a clock event to other CPUs. */ -extern void smp_timer_broadcast(cpumask_t mask); +extern void smp_timer_broadcast(const struct cpumask *mask); /* * Boot a secondary CPU, and assign it the specified idle task. @@ -102,7 +97,8 @@ extern int platform_cpu_kill(unsigned int cpu); extern void platform_cpu_enable(unsigned int cpu); extern void arch_send_call_function_single_ipi(int cpu); -extern void arch_send_call_function_ipi(cpumask_t mask); +extern void arch_send_call_function_ipi_mask(const struct cpumask *mask); +#define arch_send_call_function_ipi_mask arch_send_call_function_ipi_mask /* * Local timer interrupt handling function (can be IPI'ed). diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 7801aac3c04..6014dfd22af 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -326,14 +326,14 @@ void __init smp_prepare_boot_cpu(void) per_cpu(cpu_data, cpu).idle = current; } -static void send_ipi_message(cpumask_t callmap, enum ipi_msg_type msg) +static void send_ipi_message(const struct cpumask *mask, enum ipi_msg_type msg) { unsigned long flags; unsigned int cpu; local_irq_save(flags); - for_each_cpu_mask(cpu, callmap) { + for_each_cpu(cpu, mask) { struct ipi_data *ipi = &per_cpu(ipi_data, cpu); spin_lock(&ipi->lock); @@ -344,19 +344,19 @@ static void send_ipi_message(cpumask_t callmap, enum ipi_msg_type msg) /* * Call the platform specific cross-CPU call function. */ - smp_cross_call(callmap); + smp_cross_call(mask); local_irq_restore(flags); } -void arch_send_call_function_ipi(cpumask_t mask) +void arch_send_call_function_ipi_mask(const struct cpumask *mask) { send_ipi_message(mask, IPI_CALL_FUNC); } void arch_send_call_function_single_ipi(int cpu) { - send_ipi_message(cpumask_of_cpu(cpu), IPI_CALL_FUNC_SINGLE); + send_ipi_message(cpumask_of(cpu), IPI_CALL_FUNC_SINGLE); } void show_ipi_list(struct seq_file *p) @@ -498,17 +498,10 @@ asmlinkage void __exception do_IPI(struct pt_regs *regs) void smp_send_reschedule(int cpu) { - send_ipi_message(cpumask_of_cpu(cpu), IPI_RESCHEDULE); + send_ipi_message(cpumask_of(cpu), IPI_RESCHEDULE); } -void smp_send_timer(void) -{ - cpumask_t mask = cpu_online_map; - cpu_clear(smp_processor_id(), mask); - send_ipi_message(mask, IPI_TIMER); -} - -void smp_timer_broadcast(cpumask_t mask) +void smp_timer_broadcast(const struct cpumask *mask) { send_ipi_message(mask, IPI_TIMER); } @@ -517,7 +510,7 @@ void smp_send_stop(void) { cpumask_t mask = cpu_online_map; cpu_clear(smp_processor_id(), mask); - send_ipi_message(mask, IPI_CPU_STOP); + send_ipi_message(&mask, IPI_CPU_STOP); } /* @@ -528,20 +521,17 @@ int setup_profiling_timer(unsigned int multiplier) return -EINVAL; } -static int -on_each_cpu_mask(void (*func)(void *), void *info, int wait, cpumask_t mask) +static void +on_each_cpu_mask(void (*func)(void *), void *info, int wait, + const struct cpumask *mask) { - int ret = 0; - preempt_disable(); - ret = smp_call_function_mask(mask, func, info, wait); - if (cpu_isset(smp_processor_id(), mask)) + smp_call_function_many(mask, func, info, wait); + if (cpumask_test_cpu(smp_processor_id(), mask)) func(info); preempt_enable(); - - return ret; } /**********************************************************************/ @@ -602,20 +592,17 @@ void flush_tlb_all(void) void flush_tlb_mm(struct mm_struct *mm) { - cpumask_t mask = mm->cpu_vm_mask; - - on_each_cpu_mask(ipi_flush_tlb_mm, mm, 1, mask); + on_each_cpu_mask(ipi_flush_tlb_mm, mm, 1, &mm->cpu_vm_mask); } void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr) { - cpumask_t mask = vma->vm_mm->cpu_vm_mask; struct tlb_args ta; ta.ta_vma = vma; ta.ta_start = uaddr; - on_each_cpu_mask(ipi_flush_tlb_page, &ta, 1, mask); + on_each_cpu_mask(ipi_flush_tlb_page, &ta, 1, &vma->vm_mm->cpu_vm_mask); } void flush_tlb_kernel_page(unsigned long kaddr) @@ -630,14 +617,13 @@ void flush_tlb_kernel_page(unsigned long kaddr) void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, unsigned long end) { - cpumask_t mask = vma->vm_mm->cpu_vm_mask; struct tlb_args ta; ta.ta_vma = vma; ta.ta_start = start; ta.ta_end = end; - on_each_cpu_mask(ipi_flush_tlb_range, &ta, 1, mask); + on_each_cpu_mask(ipi_flush_tlb_range, &ta, 1, &vma->vm_mm->cpu_vm_mask); } void flush_tlb_kernel_range(unsigned long start, unsigned long end) diff --git a/arch/arm/mach-realview/include/mach/smp.h b/arch/arm/mach-realview/include/mach/smp.h index 515819efd04..e2ff53402f8 100644 --- a/arch/arm/mach-realview/include/mach/smp.h +++ b/arch/arm/mach-realview/include/mach/smp.h @@ -15,15 +15,15 @@ /* * We use IRQ1 as the IPI */ -static inline void smp_cross_call(cpumask_t callmap) +static inline void smp_cross_call(const struct cpumask *mask) { - gic_raise_softirq(callmap, 1); + gic_raise_softirq(mask, 1); } /* * Do nothing on MPcore. */ -static inline void smp_cross_call_done(cpumask_t callmap) +static inline void smp_cross_call_done(const struct cpumask *mask) { } diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c index ea3c75595fa..a5730466dff 100644 --- a/arch/arm/mach-realview/platsmp.c +++ b/arch/arm/mach-realview/platsmp.c @@ -82,7 +82,7 @@ void __cpuinit platform_secondary_init(unsigned int cpu) * to get this processor out of WFI in the BootMonitor - make * sure that we are no longer being sent this soft interrupt */ - smp_cross_call_done(cpumask_of_cpu(cpu)); + smp_cross_call_done(cpumask_of(cpu)); /* * if any interrupts are already enabled for the primary @@ -136,7 +136,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) * Use smp_cross_call() for this, since there's little * point duplicating the code here */ - smp_cross_call(cpumask_of_cpu(cpu)); + smp_cross_call(cpumask_of(cpu)); timeout = jiffies + (1 * HZ); while (time_before(jiffies, timeout)) { -- cgit v1.2.3 From 78d236c2b30d4712c1fd8c9768b163c94b39e77d Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 17 May 2009 16:23:45 +0100 Subject: [ARM] realview: remove useless smp_cross_call_done() smp_cross_call_done() is a no-op for MPCore, and since it's only used by platform code, there's no point in having it unless it's doing something. Signed-off-by: Russell King --- arch/arm/mach-realview/include/mach/smp.h | 7 ------- arch/arm/mach-realview/platsmp.c | 7 ------- 2 files changed, 14 deletions(-) diff --git a/arch/arm/mach-realview/include/mach/smp.h b/arch/arm/mach-realview/include/mach/smp.h index e2ff53402f8..dd53892d44a 100644 --- a/arch/arm/mach-realview/include/mach/smp.h +++ b/arch/arm/mach-realview/include/mach/smp.h @@ -20,11 +20,4 @@ static inline void smp_cross_call(const struct cpumask *mask) gic_raise_softirq(mask, 1); } -/* - * Do nothing on MPcore. - */ -static inline void smp_cross_call_done(const struct cpumask *mask) -{ -} - #endif diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c index a5730466dff..b037fd6c82d 100644 --- a/arch/arm/mach-realview/platsmp.c +++ b/arch/arm/mach-realview/platsmp.c @@ -77,13 +77,6 @@ void __cpuinit platform_secondary_init(unsigned int cpu) { trace_hardirqs_off(); - /* - * the primary core may have used a "cross call" soft interrupt - * to get this processor out of WFI in the BootMonitor - make - * sure that we are no longer being sent this soft interrupt - */ - smp_cross_call_done(cpumask_of(cpu)); - /* * if any interrupts are already enabled for the primary * core (e.g. timer irq), then they will not have been enabled -- cgit v1.2.3 From ee348d5a1d810bc9958cabb7c27302aab235d36e Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 17 May 2009 17:00:47 +0100 Subject: [ARM] realview: fix broadcast tick support Having discussed broadcast tick support with Thomas Glexiner, the broadcast tick devices should be registered with a higher rating than the global tick device, and it should have the ONESHOT and PERIODIC feature flags set. Signed-off-by: Russell King Acked-by: Thomas Glexiner --- arch/arm/mach-realview/core.c | 8 -------- arch/arm/mach-realview/localtimer.c | 6 ++++-- arch/arm/mach-realview/platsmp.c | 6 ++---- 3 files changed, 6 insertions(+), 14 deletions(-) diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index 942e1a7eb9b..076acbc5070 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -750,14 +750,6 @@ void __init realview_timer_init(unsigned int timer_irq) { u32 val; -#ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST - /* - * The dummy clock device has to be registered before the main device - * so that the latter will broadcast the clock events - */ - local_timer_setup(); -#endif - /* * set clock frequency: * REALVIEW_REFCLK is 32KHz diff --git a/arch/arm/mach-realview/localtimer.c b/arch/arm/mach-realview/localtimer.c index d0d39adf640..1c01d13460f 100644 --- a/arch/arm/mach-realview/localtimer.c +++ b/arch/arm/mach-realview/localtimer.c @@ -189,8 +189,10 @@ void __cpuinit local_timer_setup(void) struct clock_event_device *clk = &per_cpu(local_clockevent, cpu); clk->name = "dummy_timer"; - clk->features = CLOCK_EVT_FEAT_DUMMY; - clk->rating = 200; + clk->features = CLOCK_EVT_FEAT_ONESHOT | + CLOCK_EVT_FEAT_PERIODIC | + CLOCK_EVT_FEAT_DUMMY; + clk->rating = 400; clk->mult = 1; clk->set_mode = dummy_timer_set_mode; clk->broadcast = smp_timer_broadcast; diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c index b037fd6c82d..30a9c68591f 100644 --- a/arch/arm/mach-realview/platsmp.c +++ b/arch/arm/mach-realview/platsmp.c @@ -217,11 +217,9 @@ void __init smp_prepare_cpus(unsigned int max_cpus) if (max_cpus > ncores) max_cpus = ncores; -#ifdef CONFIG_LOCAL_TIMERS +#if defined(CONFIG_LOCAL_TIMERS) || defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST) /* - * Enable the local timer for primary CPU. If the device is - * dummy (!CONFIG_LOCAL_TIMERS), it was already registers in - * realview_timer_init + * Enable the local timer or broadcast device for the boot CPU. */ local_timer_setup(); #endif -- cgit v1.2.3 From 12abb35a03e32c97235fcefdcf2d851be9f82dc2 Mon Sep 17 00:00:00 2001 From: Jeff Mahoney Date: Sun, 17 May 2009 01:02:01 -0400 Subject: reiserfs: clean up ifdefs With xattr cleanup even with xattrs disabled, much of the initial setup is still performed. Some #ifdefs are just not needed since the options they protect wouldn't be available anyway. This cleans those up. Signed-off-by: Jeff Mahoney Signed-off-by: Linus Torvalds --- fs/reiserfs/xattr.c | 45 ++++++++++++++++++++++----------------------- 1 file changed, 22 insertions(+), 23 deletions(-) diff --git a/fs/reiserfs/xattr.c b/fs/reiserfs/xattr.c index 2237e10c7c7..cf949646dd5 100644 --- a/fs/reiserfs/xattr.c +++ b/fs/reiserfs/xattr.c @@ -685,20 +685,6 @@ out: return err; } -/* Actual operations that are exported to VFS-land */ -struct xattr_handler *reiserfs_xattr_handlers[] = { - &reiserfs_xattr_user_handler, - &reiserfs_xattr_trusted_handler, -#ifdef CONFIG_REISERFS_FS_SECURITY - &reiserfs_xattr_security_handler, -#endif -#ifdef CONFIG_REISERFS_FS_POSIX_ACL - &reiserfs_posix_acl_access_handler, - &reiserfs_posix_acl_default_handler, -#endif - NULL -}; - /* * In order to implement different sets of xattr operations for each xattr * prefix with the generic xattr API, a filesystem should create a @@ -922,6 +908,28 @@ static int create_privroot(struct dentry *dentry) return 0; } +#else +int __init reiserfs_xattr_register_handlers(void) { return 0; } +void reiserfs_xattr_unregister_handlers(void) {} +static int create_privroot(struct dentry *dentry) { return 0; } +#endif + +/* Actual operations that are exported to VFS-land */ +struct xattr_handler *reiserfs_xattr_handlers[] = { +#ifdef CONFIG_REISERFS_FS_XATTR + &reiserfs_xattr_user_handler, + &reiserfs_xattr_trusted_handler, +#endif +#ifdef CONFIG_REISERFS_FS_SECURITY + &reiserfs_xattr_security_handler, +#endif +#ifdef CONFIG_REISERFS_FS_POSIX_ACL + &reiserfs_posix_acl_access_handler, + &reiserfs_posix_acl_default_handler, +#endif + NULL +}; + static int xattr_mount_check(struct super_block *s) { /* We need generation numbers to ensure that the oid mapping is correct @@ -941,11 +949,6 @@ static int xattr_mount_check(struct super_block *s) return 0; } -#else -int __init reiserfs_xattr_register_handlers(void) { return 0; } -void reiserfs_xattr_unregister_handlers(void) {} -#endif - /* This will catch lookups from the fs root to .reiserfs_priv */ static int xattr_lookup_poison(struct dentry *dentry, struct qstr *q1, struct qstr *name) @@ -992,7 +995,6 @@ int reiserfs_xattr_init(struct super_block *s, int mount_flags) int err = 0; struct dentry *privroot = REISERFS_SB(s)->priv_root; -#ifdef CONFIG_REISERFS_FS_XATTR err = xattr_mount_check(s); if (err) goto error; @@ -1023,14 +1025,11 @@ error: clear_bit(REISERFS_XATTRS_USER, &(REISERFS_SB(s)->s_mount_opt)); clear_bit(REISERFS_POSIXACL, &(REISERFS_SB(s)->s_mount_opt)); } -#endif /* The super_block MS_POSIXACL must mirror the (no)acl mount option. */ -#ifdef CONFIG_REISERFS_FS_POSIX_ACL if (reiserfs_posixacl(s)) s->s_flags |= MS_POSIXACL; else -#endif s->s_flags &= ~MS_POSIXACL; return err; -- cgit v1.2.3 From ceb5edc457f07956c82dccfb54ca8ae7e2a399f0 Mon Sep 17 00:00:00 2001 From: Jeff Mahoney Date: Sun, 17 May 2009 01:02:02 -0400 Subject: reiserfs: deal with NULL xattr root w/ xattrs disabled This avoids an Oops in open_xa_root that can occur when deleting a file with xattrs disabled. It assumes that the xattr root will be there, and that is not guaranteed. Signed-off-by: Jeff Mahoney Signed-off-by: Linus Torvalds --- fs/reiserfs/super.c | 2 -- fs/reiserfs/xattr.c | 4 +++- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/fs/reiserfs/super.c b/fs/reiserfs/super.c index 1215a4f50cd..3567fb9e3fb 100644 --- a/fs/reiserfs/super.c +++ b/fs/reiserfs/super.c @@ -448,13 +448,11 @@ int remove_save_link(struct inode *inode, int truncate) static void reiserfs_kill_sb(struct super_block *s) { if (REISERFS_SB(s)) { -#ifdef CONFIG_REISERFS_FS_XATTR if (REISERFS_SB(s)->xattr_root) { d_invalidate(REISERFS_SB(s)->xattr_root); dput(REISERFS_SB(s)->xattr_root); REISERFS_SB(s)->xattr_root = NULL; } -#endif if (REISERFS_SB(s)->priv_root) { d_invalidate(REISERFS_SB(s)->priv_root); dput(REISERFS_SB(s)->priv_root); diff --git a/fs/reiserfs/xattr.c b/fs/reiserfs/xattr.c index cf949646dd5..628075ca82c 100644 --- a/fs/reiserfs/xattr.c +++ b/fs/reiserfs/xattr.c @@ -123,7 +123,9 @@ static struct dentry *open_xa_root(struct super_block *sb, int flags) mutex_lock_nested(&privroot->d_inode->i_mutex, I_MUTEX_XATTR); xaroot = dget(REISERFS_SB(sb)->xattr_root); - if (!xaroot->d_inode) { + if (!xaroot) + xaroot = ERR_PTR(-ENODATA); + else if (!xaroot->d_inode) { int err = -ENODATA; if (xattr_may_create(flags)) err = xattr_mkdir(privroot->d_inode, xaroot, 0700); -- cgit v1.2.3 From b83674c0da6558e357c6b482ccf299eeea77d8ef Mon Sep 17 00:00:00 2001 From: Jeff Mahoney Date: Sun, 17 May 2009 01:02:03 -0400 Subject: reiserfs: fixup perms when xattrs are disabled This adds CONFIG_REISERFS_FS_XATTR protection from reiserfs_permission. This is needed to avoid warnings during file deletions and chowns with xattrs disabled. Signed-off-by: Jeff Mahoney Signed-off-by: Linus Torvalds --- fs/reiserfs/xattr.c | 36 +++++++++++++++++++----------------- include/linux/reiserfs_xattr.h | 4 +--- 2 files changed, 20 insertions(+), 20 deletions(-) diff --git a/fs/reiserfs/xattr.c b/fs/reiserfs/xattr.c index 628075ca82c..8e7deb0e696 100644 --- a/fs/reiserfs/xattr.c +++ b/fs/reiserfs/xattr.c @@ -871,23 +871,6 @@ static int reiserfs_check_acl(struct inode *inode, int mask) return error; } -int reiserfs_permission(struct inode *inode, int mask) -{ - /* - * We don't do permission checks on the internal objects. - * Permissions are determined by the "owning" object. - */ - if (IS_PRIVATE(inode)) - return 0; - /* - * Stat data v1 doesn't support ACLs. - */ - if (get_inode_sd_version(inode) == STAT_DATA_V1) - return generic_permission(inode, mask, NULL); - else - return generic_permission(inode, mask, reiserfs_check_acl); -} - static int create_privroot(struct dentry *dentry) { int err; @@ -951,6 +934,25 @@ static int xattr_mount_check(struct super_block *s) return 0; } +int reiserfs_permission(struct inode *inode, int mask) +{ + /* + * We don't do permission checks on the internal objects. + * Permissions are determined by the "owning" object. + */ + if (IS_PRIVATE(inode)) + return 0; + +#ifdef CONFIG_REISERFS_FS_XATTR + /* + * Stat data v1 doesn't support ACLs. + */ + if (get_inode_sd_version(inode) != STAT_DATA_V1) + return generic_permission(inode, mask, reiserfs_check_acl); +#endif + return generic_permission(inode, mask, NULL); +} + /* This will catch lookups from the fs root to .reiserfs_priv */ static int xattr_lookup_poison(struct dentry *dentry, struct qstr *q1, struct qstr *name) diff --git a/include/linux/reiserfs_xattr.h b/include/linux/reiserfs_xattr.h index cdedc01036e..99928dce37e 100644 --- a/include/linux/reiserfs_xattr.h +++ b/include/linux/reiserfs_xattr.h @@ -41,6 +41,7 @@ int reiserfs_xattr_init(struct super_block *sb, int mount_flags); int reiserfs_lookup_privroot(struct super_block *sb); int reiserfs_delete_xattrs(struct inode *inode); int reiserfs_chown_xattrs(struct inode *inode, struct iattr *attrs); +int reiserfs_permission(struct inode *inode, int mask); #ifdef CONFIG_REISERFS_FS_XATTR #define has_xattr_dir(inode) (REISERFS_I(inode)->i_flags & i_has_xattr_dir) @@ -50,7 +51,6 @@ int reiserfs_setxattr(struct dentry *dentry, const char *name, const void *value, size_t size, int flags); ssize_t reiserfs_listxattr(struct dentry *dentry, char *buffer, size_t size); int reiserfs_removexattr(struct dentry *dentry, const char *name); -int reiserfs_permission(struct inode *inode, int mask); int reiserfs_xattr_get(struct inode *, const char *, void *, size_t); int reiserfs_xattr_set(struct inode *, const char *, const void *, size_t, int); @@ -117,8 +117,6 @@ static inline void reiserfs_init_xattr_rwsem(struct inode *inode) #define reiserfs_listxattr NULL #define reiserfs_removexattr NULL -#define reiserfs_permission NULL - static inline void reiserfs_init_xattr_rwsem(struct inode *inode) { } -- cgit v1.2.3 From 22ef37eed673587ac984965dc88ba94c68873291 Mon Sep 17 00:00:00 2001 From: Toshiyuki Okajima Date: Sat, 16 May 2009 22:56:28 -0700 Subject: page-writeback: fix the calculation of the oldest_jif in wb_kupdate() wb_kupdate() function has a bug on linux-2.6.30-rc5. This bug causes generic_sync_sb_inodes() to start to write inodes back much earlier than our expectations because it miscalculates oldest_jif in wb_kupdate(). This bug was introduced in 704503d836042d4a4c7685b7036e7de0418fbc0f ('mm: fix proc_dointvec_userhz_jiffies "breakage"'). Signed-off-by: Toshiyuki Okajima Cc: Alexey Dobriyan Cc: Peter Zijlstra Cc: Nick Piggin Cc: Al Viro Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/page-writeback.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/mm/page-writeback.c b/mm/page-writeback.c index 30351f0063a..bb553c3e955 100644 --- a/mm/page-writeback.c +++ b/mm/page-writeback.c @@ -94,12 +94,12 @@ unsigned long vm_dirty_bytes; /* * The interval between `kupdate'-style writebacks */ -unsigned int dirty_writeback_interval = 5 * 100; /* sentiseconds */ +unsigned int dirty_writeback_interval = 5 * 100; /* centiseconds */ /* * The longest time for which data is allowed to remain dirty */ -unsigned int dirty_expire_interval = 30 * 100; /* sentiseconds */ +unsigned int dirty_expire_interval = 30 * 100; /* centiseconds */ /* * Flag that makes the machine dump writes/reads and block dirtyings. @@ -770,7 +770,7 @@ static void wb_kupdate(unsigned long arg) sync_supers(); - oldest_jif = jiffies - msecs_to_jiffies(dirty_expire_interval); + oldest_jif = jiffies - msecs_to_jiffies(dirty_expire_interval * 10); start_jif = jiffies; next_jif = start_jif + msecs_to_jiffies(dirty_writeback_interval * 10); nr_to_write = global_page_state(NR_FILE_DIRTY) + -- cgit v1.2.3 From 5e392739d6ab72f7c35040aa07f4097904bce6e7 Mon Sep 17 00:00:00 2001 From: Pavel Emelyanov Date: Mon, 11 May 2009 00:36:35 +0000 Subject: netpoll: don't dereference NULL dev from np It looks like the dev in netpoll_poll can be NULL - at lease it's checked at the function beginning. Thus the dev->netde_ops dereference looks dangerous. Signed-off-by: Pavel Emelyanov Signed-off-by: David S. Miller --- net/core/netpoll.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/net/core/netpoll.c b/net/core/netpoll.c index b5873bdff61..64f51eec657 100644 --- a/net/core/netpoll.c +++ b/net/core/netpoll.c @@ -175,9 +175,13 @@ static void service_arp_queue(struct netpoll_info *npi) void netpoll_poll(struct netpoll *np) { struct net_device *dev = np->dev; - const struct net_device_ops *ops = dev->netdev_ops; + const struct net_device_ops *ops; + + if (!dev || !netif_running(dev)) + return; - if (!dev || !netif_running(dev) || !ops->ndo_poll_controller) + ops = dev->netdev_ops; + if (!ops->ndo_poll_controller) return; /* Process pending work on NIC */ -- cgit v1.2.3 From 2513dfb83fc775364fe85803d3a84d7ebe5763a5 Mon Sep 17 00:00:00 2001 From: Chris Friesen Date: Sun, 17 May 2009 20:39:33 -0700 Subject: ipconfig: handle case of delayed DHCP server If a DHCP server is delayed, it's possible for the client to receive the DHCPOFFER after it has already sent out a new DHCPDISCOVER message from a second interface. The client then sends out a DHCPREQUEST from the second interface, but the server doesn't recognize the device and rejects the request. This patch simply tracks the current device being configured and throws away the OFFER if it is not intended for the current device. A more sophisticated approach would be to put the OFFER information into the struct ic_device rather than storing it globally. Signed-off-by: Chris Friesen Signed-off-by: David S. Miller --- net/ipv4/ipconfig.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/net/ipv4/ipconfig.c b/net/ipv4/ipconfig.c index 90d22ae0a41..88bf051d0cb 100644 --- a/net/ipv4/ipconfig.c +++ b/net/ipv4/ipconfig.c @@ -139,6 +139,8 @@ __be32 ic_servaddr = NONE; /* Boot server IP address */ __be32 root_server_addr = NONE; /* Address of NFS server */ u8 root_server_path[256] = { 0, }; /* Path to mount as root */ +u32 ic_dev_xid; /* Device under configuration */ + /* vendor class identifier */ static char vendor_class_identifier[253] __initdata; @@ -932,6 +934,13 @@ static int __init ic_bootp_recv(struct sk_buff *skb, struct net_device *dev, str goto drop_unlock; } + /* Is it a reply for the device we are configuring? */ + if (b->xid != ic_dev_xid) { + if (net_ratelimit()) + printk(KERN_ERR "DHCP/BOOTP: Ignoring delayed packet \n"); + goto drop_unlock; + } + /* Parse extensions */ if (ext_len >= 4 && !memcmp(b->exten, ic_bootp_cookie, 4)) { /* Check magic cookie */ @@ -1115,6 +1124,9 @@ static int __init ic_dynamic(void) get_random_bytes(&timeout, sizeof(timeout)); timeout = CONF_BASE_TIMEOUT + (timeout % (unsigned) CONF_TIMEOUT_RANDOM); for (;;) { + /* Track the device we are configuring */ + ic_dev_xid = d->xid; + #ifdef IPCONFIG_BOOTP if (do_bootp && (d->able & IC_BOOTP)) ic_bootp_send_if(d, jiffies - start_jiffies); -- cgit v1.2.3 From 72876a603422d3767273ffb3918033fa1bfda0f3 Mon Sep 17 00:00:00 2001 From: Yevgeny Petrilin Date: Sun, 17 May 2009 20:48:59 -0700 Subject: mlx4_en: Fix not deleted napi structures Napi structures are being created each time we open a port, but when the port is closed the napi structure is only disabled but not removed. This bug caused hang while removing the driver. Signed-off-by: Yevgeny Petrilin Signed-off-by: David S. Miller --- drivers/net/mlx4/en_cq.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/mlx4/en_cq.c b/drivers/net/mlx4/en_cq.c index 91f50de84be..a276125b709 100644 --- a/drivers/net/mlx4/en_cq.c +++ b/drivers/net/mlx4/en_cq.c @@ -125,8 +125,10 @@ void mlx4_en_deactivate_cq(struct mlx4_en_priv *priv, struct mlx4_en_cq *cq) if (cq->is_tx) del_timer(&cq->timer); - else + else { napi_disable(&cq->napi); + netif_napi_del(&cq->napi); + } mlx4_cq_free(mdev->dev, &cq->mcq); } -- cgit v1.2.3 From a8f492c6ac6072d6c5bce4b2f13dc44612991051 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sat, 16 May 2009 01:21:58 +0000 Subject: NET: Meth: Fix unsafe mix of irq and non-irq spinlocks. Mixing of normal and irq spinlocks results in the following lockdep messages on bootup on IP32: [...] Sending DHCP requests . ====================================================== [ INFO: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected ] 2.6.30-rc5-00164-g41baeef #30 ------------------------------------------------------ swapper/1 [HC0[0]:SC0[1]:HE0:SE0] is trying to acquire: (&priv->meth_lock){+.+...}, at: [] meth_tx+0x48/0x43c and this task is already holding: (_xmit_ETHER#2){+.-...}, at: [] __qdisc_run+0x118/0x30c which would create a new lock dependency: (_xmit_ETHER#2){+.-...} -> (&priv->meth_lock){+.+...} but this new dependency connects a SOFTIRQ-irq-safe lock: (_xmit_ETHER#2){+.-...} ... which became SOFTIRQ-irq-safe at: [] __lock_acquire+0x784/0x1a14 [] lock_acquire+0xf8/0x150 [] _spin_lock+0x30/0x44 [] dev_watchdog+0x70/0x398 [] run_timer_softirq+0x1a8/0x248 [] __do_softirq+0xec/0x208 [] do_softirq+0x60/0xe4 [] irq_exit+0x54/0x9c [] ret_from_irq+0x0/0x4 [] r4k_wait+0x20/0x40 [] cpu_idle+0x30/0x60 [] start_kernel+0x3ec/0x404 to a SOFTIRQ-irq-unsafe lock: (&priv->meth_lock){+.+...} ... which became SOFTIRQ-irq-unsafe at: ... [] __lock_acquire+0x824/0x1a14 [] lock_acquire+0xf8/0x150 [] _spin_lock+0x30/0x44 [] meth_reset+0x118/0x2d8 [] meth_open+0x28/0x140 [] dev_open+0xe0/0x18c [] dev_change_flags+0xd8/0x1d4 [] ip_auto_config+0x1d4/0xf28 [] do_one_initcall+0x58/0x170 [] kernel_init+0x98/0x104 [] kernel_thread_helper+0x10/0x18 other info that might help us debug this: 2 locks held by swapper/1: #0: (rcu_read_lock){.+.+..}, at: [] dev_queue_xmit+0x1e0/0x4b0 #1: (_xmit_ETHER#2){+.-...}, at: [] __qdisc_run+0x118/0x30c the SOFTIRQ-irq-safe lock's dependencies: -> (_xmit_ETHER#2){+.-...} ops: 0 { HARDIRQ-ON-W at: [] __lock_acquire+0x7fc/0x1a14 [] lock_acquire+0xf8/0x150 [] _spin_lock+0x30/0x44 [] dev_watchdog+0x70/0x398 [] run_timer_softirq+0x1a8/0x248 [] __do_softirq+0xec/0x208 [] do_softirq+0x60/0xe4 [] irq_exit+0x54/0x9c [] ret_from_irq+0x0/0x4 [] r4k_wait+0x20/0x40 [] cpu_idle+0x30/0x60 [] start_kernel+0x3ec/0x404 IN-SOFTIRQ-W at: [] __lock_acquire+0x784/0x1a14 [] lock_acquire+0xf8/0x150 [] _spin_lock+0x30/0x44 [] dev_watchdog+0x70/0x398 [] run_timer_softirq+0x1a8/0x248 [] __do_softirq+0xec/0x208 [] do_softirq+0x60/0xe4 [] irq_exit+0x54/0x9c [] ret_from_irq+0x0/0x4 [] r4k_wait+0x20/0x40 [] cpu_idle+0x30/0x60 [] start_kernel+0x3ec/0x404 INITIAL USE at: [] __lock_acquire+0x89c/0x1a14 [] lock_acquire+0xf8/0x150 [] _spin_lock+0x30/0x44 [] dev_watchdog+0x70/0x398 [] run_timer_softirq+0x1a8/0x248 [] __do_softirq+0xec/0x208 [] do_softirq+0x60/0xe4 [] irq_exit+0x54/0x9c [] ret_from_irq+0x0/0x4 [] r4k_wait+0x20/0x40 [] cpu_idle+0x30/0x60 [] start_kernel+0x3ec/0x404 } ... key at: [] netdev_xmit_lock_key+0x8/0x1c8 the SOFTIRQ-irq-unsafe lock's dependencies: -> (&priv->meth_lock){+.+...} ops: 0 { HARDIRQ-ON-W at: [] __lock_acquire+0x7fc/0x1a14 [] lock_acquire+0xf8/0x150 [] _spin_lock+0x30/0x44 [] meth_reset+0x118/0x2d8 [] meth_open+0x28/0x140 [] dev_open+0xe0/0x18c [] dev_change_flags+0xd8/0x1d4 [] ip_auto_config+0x1d4/0xf28 [] do_one_initcall+0x58/0x170 [] kernel_init+0x98/0x104 [] kernel_thread_helper+0x10/0x18 SOFTIRQ-ON-W at: [] __lock_acquire+0x824/0x1a14 [] lock_acquire+0xf8/0x150 [] _spin_lock+0x30/0x44 [] meth_reset+0x118/0x2d8 [] meth_open+0x28/0x140 [] dev_open+0xe0/0x18c [] dev_change_flags+0xd8/0x1d4 [] ip_auto_config+0x1d4/0xf28 [] do_one_initcall+0x58/0x170 [] kernel_init+0x98/0x104 [] kernel_thread_helper+0x10/0x18 INITIAL USE at: [] __lock_acquire+0x89c/0x1a14 [] lock_acquire+0xf8/0x150 [] _spin_lock+0x30/0x44 [] meth_reset+0x118/0x2d8 [] meth_open+0x28/0x140 [] dev_open+0xe0/0x18c [] dev_change_flags+0xd8/0x1d4 [] ip_auto_config+0x1d4/0xf28 [] do_one_initcall+0x58/0x170 [] kernel_init+0x98/0x104 [] kernel_thread_helper+0x10/0x18 } ... key at: [] __key.32424+0x0/0x8 stack backtrace: Call Trace: [] dump_stack+0x8/0x34 [] check_usage+0x470/0x4a0 [] check_irq_usage+0x90/0x130 [] __lock_acquire+0x12a4/0x1a14 [] lock_acquire+0xf8/0x150 [] _spin_lock_irqsave+0x60/0x84 [] meth_tx+0x48/0x43c [] __qdisc_run+0x150/0x30c [] dev_queue_xmit+0x334/0x4b0 [] ip_auto_config+0x8d0/0xf28 [] do_one_initcall+0x58/0x170 [] kernel_init+0x98/0x104 [] kernel_thread_helper+0x10/0x18 ..... timed out! IP-Config: Retrying forever (NFS root)... Sending DHCP requests ., OK [...] Fixed by converting all locks to irq locks. Signed-off-by: Ralf Baechle Tested-by: Andrew Randrianasulu Signed-off-by: David S. Miller --- drivers/net/meth.c | 27 ++++++++++++++------------- 1 file changed, 14 insertions(+), 13 deletions(-) diff --git a/drivers/net/meth.c b/drivers/net/meth.c index aa08987f6e8..dbd3436912b 100644 --- a/drivers/net/meth.c +++ b/drivers/net/meth.c @@ -127,11 +127,11 @@ static unsigned long mdio_read(struct meth_private *priv, unsigned long phyreg) static int mdio_probe(struct meth_private *priv) { int i; - unsigned long p2, p3; + unsigned long p2, p3, flags; /* check if phy is detected already */ if(priv->phy_addr>=0&&priv->phy_addr<32) return 0; - spin_lock(&priv->meth_lock); + spin_lock_irqsave(&priv->meth_lock, flags); for (i=0;i<32;++i){ priv->phy_addr=i; p2=mdio_read(priv,2); @@ -157,7 +157,7 @@ static int mdio_probe(struct meth_private *priv) break; } } - spin_unlock(&priv->meth_lock); + spin_unlock_irqrestore(&priv->meth_lock, flags); if(priv->phy_addr<32) { return 0; } @@ -373,14 +373,14 @@ static int meth_release(struct net_device *dev) static void meth_rx(struct net_device* dev, unsigned long int_status) { struct sk_buff *skb; - unsigned long status; + unsigned long status, flags; struct meth_private *priv = netdev_priv(dev); unsigned long fifo_rptr = (int_status & METH_INT_RX_RPTR_MASK) >> 8; - spin_lock(&priv->meth_lock); + spin_lock_irqsave(&priv->meth_lock, flags); priv->dma_ctrl &= ~METH_DMA_RX_INT_EN; mace->eth.dma_ctrl = priv->dma_ctrl; - spin_unlock(&priv->meth_lock); + spin_unlock_irqrestore(&priv->meth_lock, flags); if (int_status & METH_INT_RX_UNDERFLOW) { fifo_rptr = (fifo_rptr - 1) & 0x0f; @@ -452,12 +452,12 @@ static void meth_rx(struct net_device* dev, unsigned long int_status) mace->eth.rx_fifo = priv->rx_ring_dmas[priv->rx_write]; ADVANCE_RX_PTR(priv->rx_write); } - spin_lock(&priv->meth_lock); + spin_lock_irqsave(&priv->meth_lock, flags); /* In case there was underflow, and Rx DMA was disabled */ priv->dma_ctrl |= METH_DMA_RX_INT_EN | METH_DMA_RX_EN; mace->eth.dma_ctrl = priv->dma_ctrl; mace->eth.int_stat = METH_INT_RX_THRESHOLD; - spin_unlock(&priv->meth_lock); + spin_unlock_irqrestore(&priv->meth_lock, flags); } static int meth_tx_full(struct net_device *dev) @@ -470,11 +470,11 @@ static int meth_tx_full(struct net_device *dev) static void meth_tx_cleanup(struct net_device* dev, unsigned long int_status) { struct meth_private *priv = netdev_priv(dev); - unsigned long status; + unsigned long status, flags; struct sk_buff *skb; unsigned long rptr = (int_status&TX_INFO_RPTR) >> 16; - spin_lock(&priv->meth_lock); + spin_lock_irqsave(&priv->meth_lock, flags); /* Stop DMA notification */ priv->dma_ctrl &= ~(METH_DMA_TX_INT_EN); @@ -527,12 +527,13 @@ static void meth_tx_cleanup(struct net_device* dev, unsigned long int_status) } mace->eth.int_stat = METH_INT_TX_EMPTY | METH_INT_TX_PKT; - spin_unlock(&priv->meth_lock); + spin_unlock_irqrestore(&priv->meth_lock, flags); } static void meth_error(struct net_device* dev, unsigned status) { struct meth_private *priv = netdev_priv(dev); + unsigned long flags; printk(KERN_WARNING "meth: error status: 0x%08x\n",status); /* check for errors too... */ @@ -547,7 +548,7 @@ static void meth_error(struct net_device* dev, unsigned status) printk(KERN_WARNING "meth: Rx overflow\n"); if (status & (METH_INT_RX_UNDERFLOW)) { printk(KERN_WARNING "meth: Rx underflow\n"); - spin_lock(&priv->meth_lock); + spin_lock_irqsave(&priv->meth_lock, flags); mace->eth.int_stat = METH_INT_RX_UNDERFLOW; /* more underflow interrupts will be delivered, * effectively throwing us into an infinite loop. @@ -555,7 +556,7 @@ static void meth_error(struct net_device* dev, unsigned status) priv->dma_ctrl &= ~METH_DMA_RX_EN; mace->eth.dma_ctrl = priv->dma_ctrl; DPRINTK("Disabled meth Rx DMA temporarily\n"); - spin_unlock(&priv->meth_lock); + spin_unlock_irqrestore(&priv->meth_lock, flags); } mace->eth.int_stat = METH_INT_ERROR; } -- cgit v1.2.3 From a598f6aebea2481531b0757ed90cfb0d8cf1d8f5 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Fri, 15 May 2009 06:10:13 +0000 Subject: bridge: relay bridge multicast pkgs if !STP Currently the bridge catches all STP packets; even if STP is turned off. This prevents other systems (which do have STP turned on) from being able to detect loops in the network. With this patch, if STP is off, then any packet sent to the STP multicast group address is forwarded to all ports. Based on earlier patch by Joakim Tjernlund with changes to go through forwarding (not local chain), and optimization that only last octet needs to be checked. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- net/bridge/br_input.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/net/bridge/br_input.c b/net/bridge/br_input.c index 30b88777c3d..5ee1a3682bf 100644 --- a/net/bridge/br_input.c +++ b/net/bridge/br_input.c @@ -134,6 +134,10 @@ struct sk_buff *br_handle_frame(struct net_bridge_port *p, struct sk_buff *skb) if (skb->protocol == htons(ETH_P_PAUSE)) goto drop; + /* If STP is turned off, then forward */ + if (p->br->stp_enabled == BR_NO_STP && dest[5] == 0) + goto forward; + if (NF_HOOK(PF_BRIDGE, NF_BR_LOCAL_IN, skb, skb->dev, NULL, br_handle_local_finish)) return NULL; /* frame consumed by filter */ @@ -141,6 +145,7 @@ struct sk_buff *br_handle_frame(struct net_bridge_port *p, struct sk_buff *skb) return skb; /* continue processing */ } +forward: switch (p->state) { case BR_STATE_FORWARDING: rhook = rcu_dereference(br_should_route_hook); -- cgit v1.2.3 From 4f0611af47e25807cf18cd2b4d4e94206c75b29e Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Fri, 15 May 2009 06:11:58 +0000 Subject: bridge: fix initial packet flood if !STP If bridge is configured with no STP and forwarding delay of 0 (which is typical for virtualization) then when link starts it will flood all packets for the first 20 seconds. This bug was introduced by a combination of earlier changes: * forwarding database uses hold time of zero to indicate user wants to always flood packets * optimzation of the case of forwarding delay of 0 avoids the initial timer tick The fix is to just skip all the topology change detection code if kernel STP is not being used. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- net/bridge/br_stp.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/bridge/br_stp.c b/net/bridge/br_stp.c index 6e63ec3f1fc..0660515f399 100644 --- a/net/bridge/br_stp.c +++ b/net/bridge/br_stp.c @@ -297,6 +297,9 @@ void br_topology_change_detection(struct net_bridge *br) { int isroot = br_is_root_bridge(br); + if (br->stp_enabled != BR_KERNEL_STP) + return; + pr_info("%s: topology change detected, %s\n", br->dev->name, isroot ? "propagating" : "sending tcn bpdu"); -- cgit v1.2.3 From 4cd6fe1c6483cde93e2ec91f58b7af9c9eea51ad Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Fri, 15 May 2009 08:44:32 +0000 Subject: bonding: fix link down handling in 802.3ad mode One of the purposes of bonding is to allow for redundant links, and failover correctly if the cable is pulled. If all the members of a bonded device have no carrier present, the bonded device itself needs to report no carrier present to user space so management tools (like routing daemons) can respond. Bonding in 802.3ad mode does not work correctly for this because it incorrectly chooses a link that is down as a possible aggregator. Signed-off-by: Stephen Hemminger Signed-off-by: Jay Vosburgh Signed-off-by: David S. Miller --- drivers/net/bonding/bond_3ad.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c index 8c2e5ab51f0..faf094abef7 100644 --- a/drivers/net/bonding/bond_3ad.c +++ b/drivers/net/bonding/bond_3ad.c @@ -1465,6 +1465,12 @@ static struct aggregator *ad_agg_selection_test(struct aggregator *best, return best; } +static int agg_device_up(const struct aggregator *agg) +{ + return (netif_running(agg->slave->dev) && + netif_carrier_ok(agg->slave->dev)); +} + /** * ad_agg_selection_logic - select an aggregation group for a team * @aggregator: the aggregator we're looking at @@ -1496,14 +1502,13 @@ static void ad_agg_selection_logic(struct aggregator *agg) struct port *port; origin = agg; - active = __get_active_agg(agg); - best = active; + best = (active && agg_device_up(active)) ? active : NULL; do { agg->is_active = 0; - if (agg->num_of_ports) + if (agg->num_of_ports && agg_device_up(agg)) best = ad_agg_selection_test(best, agg); } while ((agg = __get_next_agg(agg))); -- cgit v1.2.3 From eb0519b5a1cf07d5a1b919cffa0304cdaaa97a7e Mon Sep 17 00:00:00 2001 From: Gabriel Paubert Date: Sun, 17 May 2009 21:16:47 -0700 Subject: mv643xx_eth: fix PPC DMA breakage After 2.6.29, PPC no more admits passing NULL to the dev parameter of the DMA API. The result is a BUG followed by solid lock-up when the mv643xx_eth driver brings an interface up. The following patch makes the driver work on my Pegasos again; it is mostly a search and replace of NULL by mp->dev->dev.parent in dma allocation/freeing/mapping/unmapping functions. Signed-off-by: Gabriel Paubert Acked-by: Lennert Buytenhek Signed-off-by: David S. Miller --- drivers/net/mv643xx_eth.c | 41 ++++++++++++++++++++++------------------- 1 file changed, 22 insertions(+), 19 deletions(-) diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index a400d7115f7..6bb5af35eda 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -569,7 +569,7 @@ static int rxq_process(struct rx_queue *rxq, int budget) if (rxq->rx_curr_desc == rxq->rx_ring_size) rxq->rx_curr_desc = 0; - dma_unmap_single(NULL, rx_desc->buf_ptr, + dma_unmap_single(mp->dev->dev.parent, rx_desc->buf_ptr, rx_desc->buf_size, DMA_FROM_DEVICE); rxq->rx_desc_count--; rx++; @@ -678,8 +678,9 @@ static int rxq_refill(struct rx_queue *rxq, int budget) rx_desc = rxq->rx_desc_area + rx; - rx_desc->buf_ptr = dma_map_single(NULL, skb->data, - mp->skb_size, DMA_FROM_DEVICE); + rx_desc->buf_ptr = dma_map_single(mp->dev->dev.parent, + skb->data, mp->skb_size, + DMA_FROM_DEVICE); rx_desc->buf_size = mp->skb_size; rxq->rx_skb[rx] = skb; wmb(); @@ -718,6 +719,7 @@ static inline unsigned int has_tiny_unaligned_frags(struct sk_buff *skb) static void txq_submit_frag_skb(struct tx_queue *txq, struct sk_buff *skb) { + struct mv643xx_eth_private *mp = txq_to_mp(txq); int nr_frags = skb_shinfo(skb)->nr_frags; int frag; @@ -746,10 +748,10 @@ static void txq_submit_frag_skb(struct tx_queue *txq, struct sk_buff *skb) desc->l4i_chk = 0; desc->byte_cnt = this_frag->size; - desc->buf_ptr = dma_map_page(NULL, this_frag->page, - this_frag->page_offset, - this_frag->size, - DMA_TO_DEVICE); + desc->buf_ptr = dma_map_page(mp->dev->dev.parent, + this_frag->page, + this_frag->page_offset, + this_frag->size, DMA_TO_DEVICE); } } @@ -826,7 +828,8 @@ no_csum: desc->l4i_chk = l4i_chk; desc->byte_cnt = length; - desc->buf_ptr = dma_map_single(NULL, skb->data, length, DMA_TO_DEVICE); + desc->buf_ptr = dma_map_single(mp->dev->dev.parent, skb->data, + length, DMA_TO_DEVICE); __skb_queue_tail(&txq->tx_skb, skb); @@ -956,10 +959,10 @@ static int txq_reclaim(struct tx_queue *txq, int budget, int force) } if (cmd_sts & TX_FIRST_DESC) { - dma_unmap_single(NULL, desc->buf_ptr, + dma_unmap_single(mp->dev->dev.parent, desc->buf_ptr, desc->byte_cnt, DMA_TO_DEVICE); } else { - dma_unmap_page(NULL, desc->buf_ptr, + dma_unmap_page(mp->dev->dev.parent, desc->buf_ptr, desc->byte_cnt, DMA_TO_DEVICE); } @@ -1894,9 +1897,9 @@ static int rxq_init(struct mv643xx_eth_private *mp, int index) mp->rx_desc_sram_size); rxq->rx_desc_dma = mp->rx_desc_sram_addr; } else { - rxq->rx_desc_area = dma_alloc_coherent(NULL, size, - &rxq->rx_desc_dma, - GFP_KERNEL); + rxq->rx_desc_area = dma_alloc_coherent(mp->dev->dev.parent, + size, &rxq->rx_desc_dma, + GFP_KERNEL); } if (rxq->rx_desc_area == NULL) { @@ -1947,7 +1950,7 @@ out_free: if (index == 0 && size <= mp->rx_desc_sram_size) iounmap(rxq->rx_desc_area); else - dma_free_coherent(NULL, size, + dma_free_coherent(mp->dev->dev.parent, size, rxq->rx_desc_area, rxq->rx_desc_dma); @@ -1979,7 +1982,7 @@ static void rxq_deinit(struct rx_queue *rxq) rxq->rx_desc_area_size <= mp->rx_desc_sram_size) iounmap(rxq->rx_desc_area); else - dma_free_coherent(NULL, rxq->rx_desc_area_size, + dma_free_coherent(mp->dev->dev.parent, rxq->rx_desc_area_size, rxq->rx_desc_area, rxq->rx_desc_dma); kfree(rxq->rx_skb); @@ -2007,9 +2010,9 @@ static int txq_init(struct mv643xx_eth_private *mp, int index) mp->tx_desc_sram_size); txq->tx_desc_dma = mp->tx_desc_sram_addr; } else { - txq->tx_desc_area = dma_alloc_coherent(NULL, size, - &txq->tx_desc_dma, - GFP_KERNEL); + txq->tx_desc_area = dma_alloc_coherent(mp->dev->dev.parent, + size, &txq->tx_desc_dma, + GFP_KERNEL); } if (txq->tx_desc_area == NULL) { @@ -2053,7 +2056,7 @@ static void txq_deinit(struct tx_queue *txq) txq->tx_desc_area_size <= mp->tx_desc_sram_size) iounmap(txq->tx_desc_area); else - dma_free_coherent(NULL, txq->tx_desc_area_size, + dma_free_coherent(mp->dev->dev.parent, txq->tx_desc_area_size, txq->tx_desc_area, txq->tx_desc_dma); } -- cgit v1.2.3 From d77dd8d27e73a9277096453eb901aae0bfd4ca3c Mon Sep 17 00:00:00 2001 From: roel kluin Date: Fri, 15 May 2009 10:19:51 +0000 Subject: Neterion: *FIFO1_DMA_ERR set twice, should 2nd be *FIFO2_DMA_ERR? FIFO1_DMA_ERR is set twice, the second should be FIFO2_DMA_ERR. Signed-off-by: Roel Kluin Acked-by: Ram Vepa Signed-off-by: David S. Miller --- drivers/net/vxge/vxge-traffic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/vxge/vxge-traffic.c b/drivers/net/vxge/vxge-traffic.c index 7be0ae10d69..c2eeac4125f 100644 --- a/drivers/net/vxge/vxge-traffic.c +++ b/drivers/net/vxge/vxge-traffic.c @@ -115,7 +115,7 @@ enum vxge_hw_status vxge_hw_vpath_intr_enable(struct __vxge_hw_vpath_handle *vp) VXGE_HW_KDFCCTL_ERRORS_REG_KDFCCTL_FIFO1_POISON| VXGE_HW_KDFCCTL_ERRORS_REG_KDFCCTL_FIFO2_POISON| VXGE_HW_KDFCCTL_ERRORS_REG_KDFCCTL_FIFO1_DMA_ERR| - VXGE_HW_KDFCCTL_ERRORS_REG_KDFCCTL_FIFO1_DMA_ERR), 0, 32), + VXGE_HW_KDFCCTL_ERRORS_REG_KDFCCTL_FIFO2_DMA_ERR), 0, 32), &vp_reg->kdfcctl_errors_mask); __vxge_hw_pio_mem_write32_upper(0, &vp_reg->vpath_ppif_int_mask); -- cgit v1.2.3 From 705efc3b03cbee449e4d83b230423894152f7982 Mon Sep 17 00:00:00 2001 From: Wang Tinggong Date: Thu, 14 May 2009 22:49:36 +0000 Subject: Doc: fixed descriptions on /proc/sys/net/core/* and /proc/sys/net/unix/* Signed-off-by: Wang Tinggong Signed-off-by: David S. Miller --- Documentation/networking/ip-sysctl.txt | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index ec5de02f543..b121c5db707 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -1266,13 +1266,22 @@ sctp_rmem - vector of 3 INTEGERs: min, default, max sctp_wmem - vector of 3 INTEGERs: min, default, max See tcp_wmem for a description. -UNDOCUMENTED: /proc/sys/net/core/* - dev_weight FIXME +dev_weight - INTEGER + The maximum number of packets that kernel can handle on a NAPI + interrupt, it's a Per-CPU variable. + + Default: 64 /proc/sys/net/unix/* - max_dgram_qlen FIXME +max_dgram_qlen - INTEGER + The maximum length of dgram socket receive queue + + Default: 10 + + +UNDOCUMENTED: /proc/sys/net/irda/* fast_poll_increase FIXME -- cgit v1.2.3 From af3e4aca47d2e05a545a5e10ba5c7193e0b665e0 Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Thu, 30 Apr 2009 10:59:19 +0000 Subject: powerpc: Do not assert pte_locked for hugepage PTE entries With CONFIG_DEBUG_VM, an assertion is made when changing the protection flags of a PTE that the PTE is locked. Huge pages use a different pagetable format and the assertion is bogus and will always trigger with a bug looking something like Unable to handle kernel paging request for data at address 0xf1a00235800006f8 Faulting instruction address: 0xc000000000034a80 Oops: Kernel access of bad area, sig: 11 [#1] SMP NR_CPUS=32 NUMA Maple Modules linked in: dm_snapshot dm_mirror dm_region_hash dm_log dm_mod loop evdev ext3 jbd mbcache sg sd_mod ide_pci_generic pata_amd ata_generic ipr libata tg3 libphy scsi_mod windfarm_pid windfarm_smu_sat windfarm_max6690_sensor windfarm_lm75_sensor windfarm_cpufreq_clamp windfarm_core i2c_powermac NIP: c000000000034a80 LR: c000000000034b18 CTR: 0000000000000003 REGS: c000000003037600 TRAP: 0300 Not tainted (2.6.30-rc3-autokern1) MSR: 9000000000009032 CR: 28002484 XER: 200fffff DAR: f1a00235800006f8, DSISR: 0000000040010000 TASK = c0000002e54cc740[2960] 'map_high_trunca' THREAD: c000000003034000 CPU: 2 GPR00: 4000000000000000 c000000003037880 c000000000895d30 c0000002e5a2e500 GPR04: 00000000a0000000 c0000002edc40880 0000005700000393 0000000000000001 GPR08: f000000011ac0000 01a00235800006e8 00000000000000f5 f1a00235800006e8 GPR12: 0000000028000484 c0000000008dd780 0000000000001000 0000000000000000 GPR16: fffffffffffff000 0000000000000000 00000000a0000000 c000000003037a20 GPR20: c0000002e5f4ece8 0000000000001000 c0000002edc40880 0000000000000000 GPR24: c0000002e5f4ece8 0000000000000000 00000000a0000000 c0000002e5f4ece8 GPR28: 0000005700000393 c0000002e5a2e500 00000000a0000000 c000000003037880 NIP [c000000000034a80] .assert_pte_locked+0xa4/0xd0 LR [c000000000034b18] .ptep_set_access_flags+0x6c/0xb4 Call Trace: [c000000003037880] [c000000003037990] 0xc000000003037990 (unreliable) [c000000003037910] [c000000000034b18] .ptep_set_access_flags+0x6c/0xb4 [c0000000030379b0] [c00000000014bef8] .hugetlb_cow+0x124/0x674 [c000000003037b00] [c00000000014c930] .hugetlb_fault+0x4e8/0x6f8 [c000000003037c00] [c00000000013443c] .handle_mm_fault+0xac/0x828 [c000000003037cf0] [c0000000000340a8] .do_page_fault+0x39c/0x584 [c000000003037e30] [c0000000000057b0] handle_page_fault+0x20/0x5c Instruction dump: 7d29582a 7d200074 7800d182 0b000000 3c004000 3960ffff 780007c6 796b00c4 7d290214 7929a302 1d290068 7d6b4a14 <800b0010> 7c000074 7800d182 0b000000 This patch fixes the problem by not asseting the PTE is locked for VMAs backed by huge pages. Signed-off-by: Mel Gorman Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/mm/pgtable.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/mm/pgtable.c b/arch/powerpc/mm/pgtable.c index f5c6fd42265..ae1d67cc090 100644 --- a/arch/powerpc/mm/pgtable.c +++ b/arch/powerpc/mm/pgtable.c @@ -219,7 +219,8 @@ int ptep_set_access_flags(struct vm_area_struct *vma, unsigned long address, entry = do_dcache_icache_coherency(entry); changed = !pte_same(*(ptep), entry); if (changed) { - assert_pte_locked(vma->vm_mm, address); + if (!(vma->vm_flags & VM_HUGETLB)) + assert_pte_locked(vma->vm_mm, address); __ptep_set_access_flags(ptep, entry); flush_tlb_page_nohash(vma, address); } -- cgit v1.2.3 From 021376a3b655364c92c10be544a3319946a792e8 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Wed, 13 May 2009 20:30:24 +0000 Subject: powerpc/ftrace: Use pr_devel() in ftrace.c pr_debug() can now result in code being generated even when #DEBUG is not defined. That's not really desirable in the ftrace code which we want to be snappy. With CONFIG_DYNAMIC_DEBUG=y: size before: text data bss dec hex filename 3334 672 4 4010 faa arch/powerpc/kernel/ftrace.o size after: text data bss dec hex filename 2616 360 4 2980 ba4 arch/powerpc/kernel/ftrace.o Signed-off-by: Michael Ellerman Acked-by: Steven Rostedt Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/ftrace.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/arch/powerpc/kernel/ftrace.c b/arch/powerpc/kernel/ftrace.c index 70e2a736be1..5b078ee391f 100644 --- a/arch/powerpc/kernel/ftrace.c +++ b/arch/powerpc/kernel/ftrace.c @@ -157,7 +157,7 @@ __ftrace_make_nop(struct module *mod, * 0xe8, 0x4c, 0x00, 0x28, ld r2,40(r12) */ - pr_debug("ip:%lx jumps to %lx r2: %lx", ip, tramp, mod->arch.toc); + pr_devel("ip:%lx jumps to %lx r2: %lx", ip, tramp, mod->arch.toc); /* Find where the trampoline jumps to */ if (probe_kernel_read(jmp, (void *)tramp, sizeof(jmp))) { @@ -165,7 +165,7 @@ __ftrace_make_nop(struct module *mod, return -EFAULT; } - pr_debug(" %08x %08x", jmp[0], jmp[1]); + pr_devel(" %08x %08x", jmp[0], jmp[1]); /* verify that this is what we expect it to be */ if (((jmp[0] & 0xffff0000) != 0x3d820000) || @@ -181,18 +181,18 @@ __ftrace_make_nop(struct module *mod, offset = ((unsigned)((unsigned short)jmp[0]) << 16) + (int)((short)jmp[1]); - pr_debug(" %x ", offset); + pr_devel(" %x ", offset); /* get the address this jumps too */ tramp = mod->arch.toc + offset + 32; - pr_debug("toc: %lx", tramp); + pr_devel("toc: %lx", tramp); if (probe_kernel_read(jmp, (void *)tramp, 8)) { printk(KERN_ERR "Failed to read %lx\n", tramp); return -EFAULT; } - pr_debug(" %08x %08x\n", jmp[0], jmp[1]); + pr_devel(" %08x %08x\n", jmp[0], jmp[1]); ptr = ((unsigned long)jmp[0] << 32) + jmp[1]; @@ -269,7 +269,7 @@ __ftrace_make_nop(struct module *mod, * 0x4e, 0x80, 0x04, 0x20 bctr */ - pr_debug("ip:%lx jumps to %lx", ip, tramp); + pr_devel("ip:%lx jumps to %lx", ip, tramp); /* Find where the trampoline jumps to */ if (probe_kernel_read(jmp, (void *)tramp, sizeof(jmp))) { @@ -277,7 +277,7 @@ __ftrace_make_nop(struct module *mod, return -EFAULT; } - pr_debug(" %08x %08x ", jmp[0], jmp[1]); + pr_devel(" %08x %08x ", jmp[0], jmp[1]); /* verify that this is what we expect it to be */ if (((jmp[0] & 0xffff0000) != 0x3d600000) || @@ -293,7 +293,7 @@ __ftrace_make_nop(struct module *mod, if (tramp & 0x8000) tramp -= 0x10000; - pr_debug(" %lx ", tramp); + pr_devel(" %lx ", tramp); if (tramp != addr) { printk(KERN_ERR @@ -402,7 +402,7 @@ __ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr) /* ld r2,40(r1) */ op[1] = 0xe8410028; - pr_debug("write to %lx\n", rec->ip); + pr_devel("write to %lx\n", rec->ip); if (probe_kernel_write((void *)ip, op, MCOUNT_INSN_SIZE * 2)) return -EPERM; @@ -442,7 +442,7 @@ __ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr) return -EINVAL; } - pr_debug("write to %lx\n", rec->ip); + pr_devel("write to %lx\n", rec->ip); if (probe_kernel_write((void *)ip, &op, MCOUNT_INSN_SIZE)) return -EPERM; -- cgit v1.2.3 From c3cf8667ed7db58c1960958cbb0a9098d513cc60 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Fri, 15 May 2009 04:33:54 +0000 Subject: powerpc/ftrace: Fix constraint to be early clobber After upgrading my distcc boxes from gcc 4.2.2 to 4.4.0, the function graph tracer broke. This was discovered on my x86 boxes. The issue is that gcc used the same register for an output as it did for an input in an asm statement. I first thought this was a bug in gcc and reported it. I was notified that gcc was correct and that the output had to be flagged as an "early clobber". I noticed that powerpc had the same issue and this patch fixes it. Signed-off-by: Steven Rostedt Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/ftrace.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/kernel/ftrace.c b/arch/powerpc/kernel/ftrace.c index 5b078ee391f..2d182f119d1 100644 --- a/arch/powerpc/kernel/ftrace.c +++ b/arch/powerpc/kernel/ftrace.c @@ -594,7 +594,7 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr) PPC_LONG "2b,4b\n" ".previous" - : [old] "=r" (old), [faulted] "=r" (faulted) + : [old] "=&r" (old), [faulted] "=r" (faulted) : [parent] "r" (parent), [return_hooker] "r" (return_hooker) : "memory" ); -- cgit v1.2.3 From dc892288f42661a140124ecbf9d44850a95de222 Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Fri, 15 May 2009 08:01:59 +0000 Subject: powerpc/ps3: Update ps3_defconfig Refresh and set these options: CONFIG_SYSFS_DEPRECATED_V2: y -> n CONFIG_INPUT_JOYSTICK: y -> n CONFIG_HID_SONY: n -> m CONFIG_RTC_DRV_PS3: - -> m Signed-off-by: Geoff Levand Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/configs/ps3_defconfig | 105 ++++++++++++++++++++++--------------- 1 file changed, 62 insertions(+), 43 deletions(-) diff --git a/arch/powerpc/configs/ps3_defconfig b/arch/powerpc/configs/ps3_defconfig index ac14f5245d2..e28e65e7a0e 100644 --- a/arch/powerpc/configs/ps3_defconfig +++ b/arch/powerpc/configs/ps3_defconfig @@ -1,13 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc8 -# Fri Mar 13 09:28:45 2009 +# Linux kernel version: 2.6.30-rc5 +# Fri May 15 10:37:00 2009 # CONFIG_PPC64=y # # Processor support # +CONFIG_PPC_BOOK3S=y # CONFIG_POWER4_ONLY is not set CONFIG_POWER3=y CONFIG_POWER4=y @@ -55,9 +56,11 @@ CONFIG_OF=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -72,6 +75,7 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set @@ -88,8 +92,7 @@ CONFIG_CLASSIC_RCU=y CONFIG_LOG_BUF_SHIFT=17 # CONFIG_GROUP_SCHED is not set # CONFIG_CGROUPS is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set CONFIG_NAMESPACES=y # CONFIG_UTS_NS is not set @@ -99,6 +102,9 @@ CONFIG_NAMESPACES=y # CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -107,6 +113,7 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -138,6 +145,7 @@ CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_DMA_ATTRS=y CONFIG_USE_GENERIC_SMP_HELPERS=y +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -150,7 +158,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y -# CONFIG_BLK_DEV_IO_TRACE is not set CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set CONFIG_BLOCK_COMPAT=y @@ -172,7 +179,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y # CONFIG_PPC_PSERIES is not set # CONFIG_PPC_ISERIES is not set # CONFIG_PPC_PMAC is not set @@ -209,6 +215,7 @@ CONFIG_SPU_FS_64K_LS=y # CONFIG_SPU_TRACE is not set CONFIG_SPU_BASE=y # CONFIG_PQ2ADS is not set +# CONFIG_PPC_OF_BOOT_TRAMPOLINE is not set # CONFIG_IPIC is not set # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set @@ -279,11 +286,14 @@ CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_ARCH_MEMORY_PROBE=y CONFIG_PPC_HAS_HASH_64K=y CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_SCHED_SMT=y CONFIG_PROC_DEVICETREE=y @@ -316,7 +326,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -389,6 +398,7 @@ CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -396,6 +406,7 @@ CONFIG_IPV6_NDISC_NODETYPE=y # Network testing # # CONFIG_NET_PKTGEN is not set +# CONFIG_NET_DROP_MONITOR is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set @@ -419,11 +430,9 @@ CONFIG_BT_HCIBTUSB=m # CONFIG_BT_HCIBFUSB is not set # CONFIG_BT_HCIVHCI is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y CONFIG_CFG80211=m # CONFIG_CFG80211_REG_DEBUG is not set -CONFIG_NL80211=y # CONFIG_WIRELESS_OLD_REGULATORY is not set CONFIG_WIRELESS_EXT=y # CONFIG_WIRELESS_EXT_SYSFS is not set @@ -602,6 +611,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set # CONFIG_SCSI_LOWLEVEL is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set CONFIG_MD=y # CONFIG_BLK_DEV_MD is not set @@ -616,6 +626,7 @@ CONFIG_BLK_DEV_DM=m # CONFIG_DM_UEVENT is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -625,6 +636,8 @@ CONFIG_NETDEVICES=y # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y CONFIG_MII=m +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -646,12 +659,13 @@ CONFIG_GELIC_WIRELESS_OLD_PSK_INTERFACE=y CONFIG_WLAN_80211=y # CONFIG_LIBERTAS is not set # CONFIG_LIBERTAS_THINFIRM is not set +# CONFIG_AT76C50X_USB is not set # CONFIG_USB_ZD1201 is not set # CONFIG_USB_NET_RNDIS_WLAN is not set # CONFIG_RTL8187 is not set # CONFIG_MAC80211_HWSIM is not set # CONFIG_P54_COMMON is not set -# CONFIG_IWLWIFI_LEDS is not set +# CONFIG_AR9170_USB is not set # CONFIG_HOSTAP is not set # CONFIG_B43 is not set # CONFIG_B43LEGACY is not set @@ -673,6 +687,7 @@ CONFIG_USB_PEGASUS=m CONFIG_USB_USBNET=m CONFIG_USB_NET_AX8817X=m # CONFIG_USB_NET_CDCETHER is not set +# CONFIG_USB_NET_CDC_EEM is not set # CONFIG_USB_NET_DM9601 is not set # CONFIG_USB_NET_SMSC95XX is not set # CONFIG_USB_NET_GL620A is not set @@ -724,28 +739,7 @@ CONFIG_INPUT_EVDEV=m # # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set -CONFIG_INPUT_JOYSTICK=y -# CONFIG_JOYSTICK_ANALOG is not set -# CONFIG_JOYSTICK_A3D is not set -# CONFIG_JOYSTICK_ADI is not set -# CONFIG_JOYSTICK_COBRA is not set -# CONFIG_JOYSTICK_GF2K is not set -# CONFIG_JOYSTICK_GRIP is not set -# CONFIG_JOYSTICK_GRIP_MP is not set -# CONFIG_JOYSTICK_GUILLEMOT is not set -# CONFIG_JOYSTICK_INTERACT is not set -# CONFIG_JOYSTICK_SIDEWINDER is not set -# CONFIG_JOYSTICK_TMDC is not set -# CONFIG_JOYSTICK_IFORCE is not set -# CONFIG_JOYSTICK_WARRIOR is not set -# CONFIG_JOYSTICK_MAGELLAN is not set -# CONFIG_JOYSTICK_SPACEORB is not set -# CONFIG_JOYSTICK_SPACEBALL is not set -# CONFIG_JOYSTICK_STINGER is not set -# CONFIG_JOYSTICK_TWIDJOY is not set -# CONFIG_JOYSTICK_ZHENHUA is not set -# CONFIG_JOYSTICK_JOYDUMP is not set -# CONFIG_JOYSTICK_XPAD is not set +# CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -864,6 +858,7 @@ CONFIG_FB_PS3_DEFAULT_SIZE_M=9 # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -934,15 +929,17 @@ CONFIG_USB_HIDDEV=y # # Special HID drivers # -# CONFIG_HID_COMPAT is not set # CONFIG_HID_A4TECH is not set # CONFIG_HID_APPLE is not set # CONFIG_HID_BELKIN is not set # CONFIG_HID_CHERRY is not set # CONFIG_HID_CHICONY is not set # CONFIG_HID_CYPRESS is not set +# CONFIG_DRAGONRISE_FF is not set # CONFIG_HID_EZKEY is not set +# CONFIG_HID_KYE is not set # CONFIG_HID_GYRATION is not set +# CONFIG_HID_KENSINGTON is not set # CONFIG_HID_LOGITECH is not set # CONFIG_HID_MICROSOFT is not set # CONFIG_HID_MONTEREY is not set @@ -950,7 +947,7 @@ CONFIG_USB_HIDDEV=y # CONFIG_HID_PANTHERLORD is not set # CONFIG_HID_PETALYNX is not set # CONFIG_HID_SAMSUNG is not set -# CONFIG_HID_SONY is not set +CONFIG_HID_SONY=m # CONFIG_HID_SUNPLUS is not set # CONFIG_GREENASIA_FF is not set # CONFIG_HID_TOPSEED is not set @@ -1012,11 +1009,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set @@ -1058,7 +1055,6 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1074,6 +1070,7 @@ CONFIG_USB_STORAGE=m # # OTG and related infrastructure # +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1113,8 +1110,10 @@ CONFIG_RTC_INTF_DEV=y # # on-CPU RTC drivers # -CONFIG_RTC_DRV_PPC=m +# CONFIG_RTC_DRV_GENERIC is not set +CONFIG_RTC_DRV_PS3=m # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1125,6 +1124,7 @@ CONFIG_EXT2_FS=m # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=m +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set @@ -1160,6 +1160,11 @@ CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1211,6 +1216,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1223,7 +1229,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1283,6 +1288,7 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set +CONFIG_BINARY_PRINTF=y # # Library routines @@ -1296,15 +1302,16 @@ CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=m +CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m CONFIG_LZO_COMPRESS=m CONFIG_LZO_DECOMPRESS=m -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1322,6 +1329,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1357,12 +1367,15 @@ CONFIG_DEBUG_LIST=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_NOP_TRACER=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_RING_BUFFER=y CONFIG_TRACING=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1371,18 +1384,21 @@ CONFIG_TRACING=y # CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_FTRACE_STARTUP_TEST is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_PRINT_STACK_DEPTH=64 CONFIG_DEBUG_STACKOVERFLOW=y # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_CODE_PATCHING_SELFTEST is not set # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set @@ -1415,10 +1431,12 @@ CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG=m CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_GF128MUL=m # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1487,6 +1505,7 @@ CONFIG_CRYPTO_SALSA20=m # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set CONFIG_CRYPTO_LZO=m # -- cgit v1.2.3 From 0e337b42d620ca7c45fe64e64dd71957c56216c9 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Sun, 17 May 2009 18:29:03 +0000 Subject: powerpc: Explicit alignment for .data.cacheline_aligned I don't think anything guarantees that the objects in data.page_aligned are a multiple of PAGE_SIZE, thus the section may end on any boundary. So the following section, .data.cacheline_aligned needs an explicit alignment. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/vmlinux.lds.S | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S index a047a6cfca4..8ef8a14abc9 100644 --- a/arch/powerpc/kernel/vmlinux.lds.S +++ b/arch/powerpc/kernel/vmlinux.lds.S @@ -264,6 +264,7 @@ SECTIONS *(.data.page_aligned) } + . = ALIGN(L1_CACHE_BYTES); .data.cacheline_aligned : AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET) { *(.data.cacheline_aligned) } -- cgit v1.2.3 From 5b4662f098b47f68d7fcea9b065d1513547fef12 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Fri, 15 May 2009 14:50:33 -0400 Subject: regulator: da903x: add missing __devexit_p() The remove function uses __devexit, so the .remove assignment needs __devexit_p() to fix a build error with hotplug disabled. Signed-off-by: Mike Frysinger CC: Liam Girdwood CC: Mike Rapoport CC: Eric Miao Acked-by: Eric Miao Signed-off-by: Liam Girdwood --- drivers/regulator/da903x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/regulator/da903x.c b/drivers/regulator/da903x.c index 72b15495183..c6628f5a0af 100644 --- a/drivers/regulator/da903x.c +++ b/drivers/regulator/da903x.c @@ -497,7 +497,7 @@ static struct platform_driver da903x_regulator_driver = { .owner = THIS_MODULE, }, .probe = da903x_regulator_probe, - .remove = da903x_regulator_remove, + .remove = __devexit_p(da903x_regulator_remove), }; static int __init da903x_regulator_init(void) -- cgit v1.2.3 From eb33575cf67d3f35fa2510210ef92631266e2465 Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Wed, 13 May 2009 17:34:48 +0100 Subject: [ARM] Double check memmap is actually valid with a memmap has unexpected holes V2 pfn_valid() is meant to be able to tell if a given PFN has valid memmap associated with it or not. In FLATMEM, it is expected that holes always have valid memmap as long as there is valid PFNs either side of the hole. In SPARSEMEM, it is assumed that a valid section has a memmap for the entire section. However, ARM and maybe other embedded architectures in the future free memmap backing holes to save memory on the assumption the memmap is never used. The page_zone linkages are then broken even though pfn_valid() returns true. A walker of the full memmap must then do this additional check to ensure the memmap they are looking at is sane by making sure the zone and PFN linkages are still valid. This is expensive, but walkers of the full memmap are extremely rare. This was caught before for FLATMEM and hacked around but it hits again for SPARSEMEM because the page_zone linkages can look ok where the PFN linkages are totally screwed. This looks like a hatchet job but the reality is that any clean solution would end up consumning all the memory saved by punching these unexpected holes in the memmap. For example, we tried marking the memmap within the section invalid but the section size exceeds the size of the hole in most cases so pfn_valid() starts returning false where valid memmap exists. Shrinking the size of the section would increase memory consumption offsetting the gains. This patch identifies when an architecture is punching unexpected holes in the memmap that the memory model cannot automatically detect and sets ARCH_HAS_HOLES_MEMORYMODEL. At the moment, this is restricted to EP93xx which is the model sub-architecture this has been reported on but may expand later. When set, walkers of the full memmap must call memmap_valid_within() for each PFN and passing in what it expects the page and zone to be for that PFN. If it finds the linkages to be broken, it assumes the memmap is invalid for that PFN. Signed-off-by: Mel Gorman Signed-off-by: Russell King --- arch/arm/Kconfig | 6 +++--- include/linux/mmzone.h | 26 ++++++++++++++++++++++++++ mm/mmzone.c | 15 +++++++++++++++ mm/vmstat.c | 19 ++++--------------- 4 files changed, 48 insertions(+), 18 deletions(-) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index e60ec54df33..9d02cdb15b2 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -273,6 +273,7 @@ config ARCH_EP93XX select HAVE_CLK select COMMON_CLKDEV select ARCH_REQUIRE_GPIOLIB + select ARCH_HAS_HOLES_MEMORYMODEL help This enables support for the Cirrus EP93xx series of CPUs. @@ -976,10 +977,9 @@ config OABI_COMPAT UNPREDICTABLE (in fact it can be predicted that it won't work at all). If in doubt say Y. -config ARCH_FLATMEM_HAS_HOLES +config ARCH_HAS_HOLES_MEMORYMODEL bool - default y - depends on FLATMEM + default n # Discontigmem is deprecated config ARCH_DISCONTIGMEM_ENABLE diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h index 186ec6ab334..a47c879e130 100644 --- a/include/linux/mmzone.h +++ b/include/linux/mmzone.h @@ -1097,6 +1097,32 @@ unsigned long __init node_memmap_size_bytes(int, unsigned long, unsigned long); #define pfn_valid_within(pfn) (1) #endif +#ifdef CONFIG_ARCH_HAS_HOLES_MEMORYMODEL +/* + * pfn_valid() is meant to be able to tell if a given PFN has valid memmap + * associated with it or not. In FLATMEM, it is expected that holes always + * have valid memmap as long as there is valid PFNs either side of the hole. + * In SPARSEMEM, it is assumed that a valid section has a memmap for the + * entire section. + * + * However, an ARM, and maybe other embedded architectures in the future + * free memmap backing holes to save memory on the assumption the memmap is + * never used. The page_zone linkages are then broken even though pfn_valid() + * returns true. A walker of the full memmap must then do this additional + * check to ensure the memmap they are looking at is sane by making sure + * the zone and PFN linkages are still valid. This is expensive, but walkers + * of the full memmap are extremely rare. + */ +int memmap_valid_within(unsigned long pfn, + struct page *page, struct zone *zone); +#else +static inline int memmap_valid_within(unsigned long pfn, + struct page *page, struct zone *zone) +{ + return 1; +} +#endif /* CONFIG_ARCH_HAS_HOLES_MEMORYMODEL */ + #endif /* !__GENERATING_BOUNDS.H */ #endif /* !__ASSEMBLY__ */ #endif /* _LINUX_MMZONE_H */ diff --git a/mm/mmzone.c b/mm/mmzone.c index 16ce8b955dc..f5b7d176021 100644 --- a/mm/mmzone.c +++ b/mm/mmzone.c @@ -6,6 +6,7 @@ #include +#include #include #include @@ -72,3 +73,17 @@ struct zoneref *next_zones_zonelist(struct zoneref *z, *zone = zonelist_zone(z); return z; } + +#ifdef CONFIG_ARCH_HAS_HOLES_MEMORYMODEL +int memmap_valid_within(unsigned long pfn, + struct page *page, struct zone *zone) +{ + if (page_to_pfn(page) != pfn) + return 0; + + if (page_zone(page) != zone) + return 0; + + return 1; +} +#endif /* CONFIG_ARCH_HAS_HOLES_MEMORYMODEL */ diff --git a/mm/vmstat.c b/mm/vmstat.c index 66f6130976c..74d66dba0cb 100644 --- a/mm/vmstat.c +++ b/mm/vmstat.c @@ -509,22 +509,11 @@ static void pagetypeinfo_showblockcount_print(struct seq_file *m, continue; page = pfn_to_page(pfn); -#ifdef CONFIG_ARCH_FLATMEM_HAS_HOLES - /* - * Ordinarily, memory holes in flatmem still have a valid - * memmap for the PFN range. However, an architecture for - * embedded systems (e.g. ARM) can free up the memmap backing - * holes to save memory on the assumption the memmap is - * never used. The page_zone linkages are then broken even - * though pfn_valid() returns true. Skip the page if the - * linkages are broken. Even if this test passed, the impact - * is that the counters for the movable type are off but - * fragmentation monitoring is likely meaningless on small - * systems. - */ - if (page_zone(page) != zone) + + /* Watch for unexpected holes punched in the memmap */ + if (!memmap_valid_within(pfn, page, zone)) continue; -#endif + mtype = get_pageblock_migratetype(page); if (mtype < MIGRATE_TYPES) -- cgit v1.2.3 From 8190b37f6483fedc530110d8c7d710d1c0317ba4 Mon Sep 17 00:00:00 2001 From: Pavel Roskin Date: Tue, 12 May 2009 13:36:46 -0700 Subject: [ARM] mach-l7200: fix spelling of SYS_CLOCK_OFF Signed-off-by: Pavel Roskin Signed-off-by: Andrew Morton Signed-off-by: Russell King --- arch/arm/mach-l7200/include/mach/sys-clock.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-l7200/include/mach/sys-clock.h b/arch/arm/mach-l7200/include/mach/sys-clock.h index 2d7722be60e..e9729a35751 100644 --- a/arch/arm/mach-l7200/include/mach/sys-clock.h +++ b/arch/arm/mach-l7200/include/mach/sys-clock.h @@ -18,7 +18,7 @@ /* IO_START and IO_BASE are defined in hardware.h */ -#define SYS_CLOCK_START (IO_START + SYS_CLCOK_OFF) /* Physical address */ +#define SYS_CLOCK_START (IO_START + SYS_CLOCK_OFF) /* Physical address */ #define SYS_CLOCK_BASE (IO_BASE + SYS_CLOCK_OFF) /* Virtual address */ /* Define the interface to the SYS_CLOCK */ -- cgit v1.2.3 From 3026589c1bc17b0c389b95afec127e92e2a745e2 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Mon, 11 May 2009 09:24:47 +0200 Subject: microblaze: Update Microblaze defconfig Signed-off-by: Michal Simek --- arch/microblaze/configs/nommu_defconfig | 50 +++++++++++++++++++++------------ 1 file changed, 32 insertions(+), 18 deletions(-) diff --git a/arch/microblaze/configs/nommu_defconfig b/arch/microblaze/configs/nommu_defconfig index beb7ecd7279..4ef6af0a8f3 100644 --- a/arch/microblaze/configs/nommu_defconfig +++ b/arch/microblaze/configs/nommu_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29 -# Tue Mar 24 10:23:20 2009 +# Linux kernel version: 2.6.30-rc5 +# Mon May 11 09:01:02 2009 # CONFIG_MICROBLAZE=y # CONFIG_SWAP is not set @@ -32,6 +32,7 @@ CONFIG_LOCALVERSION_AUTO=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_BSD_PROCESS_ACCT_V3=y # CONFIG_TASKSTATS is not set @@ -63,6 +64,7 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y @@ -80,6 +82,8 @@ CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +# CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -92,7 +96,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -166,6 +169,8 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_NOMMU_INITIAL_TRIM_EXCESS=1 # # Exectuable file formats @@ -180,7 +185,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -232,6 +236,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -244,7 +249,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y @@ -379,6 +383,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -388,6 +393,7 @@ CONFIG_NETDEVICES=y # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y # CONFIG_MII is not set +# CONFIG_ETHOC is not set # CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set @@ -405,7 +411,6 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -455,6 +460,7 @@ CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_RTC is not set # CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set @@ -525,7 +531,7 @@ CONFIG_USB_SUPPORT=y # # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # CONFIG_USB_GADGET is not set @@ -538,6 +544,7 @@ CONFIG_USB_SUPPORT=y # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -562,6 +569,11 @@ CONFIG_FILE_LOCKING=y # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -601,8 +613,13 @@ CONFIG_CRAMFS=y # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set CONFIG_ROMFS_FS=y +CONFIG_ROMFS_BACKED_BY_BLOCK=y +# CONFIG_ROMFS_BACKED_BY_MTD is not set +# CONFIG_ROMFS_BACKED_BY_BOTH is not set +CONFIG_ROMFS_ON_BLOCK=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -614,7 +631,6 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_ACL_SUPPORT=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -647,6 +663,9 @@ CONFIG_DEBUG_SHIRQ=y CONFIG_DETECT_SOFTLOCKUP=y CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y CONFIG_SCHEDSTATS=y CONFIG_TIMER_STATS=y @@ -678,15 +697,8 @@ CONFIG_DEBUG_SG=y # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set CONFIG_SYSCTL_SYSCALL_CHECK=y - -# -# Tracers -# -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_PAGE_POISONING is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_EARLY_PRINTK=y CONFIG_HEART_BEAT=y @@ -777,6 +789,7 @@ CONFIG_CRYPTO=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # @@ -784,6 +797,7 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -797,8 +811,8 @@ CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y -- cgit v1.2.3 From 7b7210d7a9d260becef4dba98b9075e2c9b41f93 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Thu, 14 May 2009 13:35:52 +0200 Subject: microblaze: Fix kind-of-intr checking against number of interrupts + Fix typographic fault. Signed-off-by: Michal Simek --- arch/microblaze/kernel/intc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/microblaze/kernel/intc.c b/arch/microblaze/kernel/intc.c index a69d3e3c2fd..b15605299a5 100644 --- a/arch/microblaze/kernel/intc.c +++ b/arch/microblaze/kernel/intc.c @@ -137,8 +137,8 @@ void __init init_IRQ(void) intr_type = *(int *) of_get_property(intc, "xlnx,kind-of-intr", NULL); - if (intr_type >= (1 << nr_irq)) - printk(KERN_INFO " ERROR: Mishmash in king-of-intr param\n"); + if (intr_type >= (1 << (nr_irq + 1))) + printk(KERN_INFO " ERROR: Mismatch in kind-of-intr param\n"); #ifdef CONFIG_SELFMOD_INTC selfmod_function((int *) arr_func, intc_baseaddr); -- cgit v1.2.3 From bac9caf016bf147af7d3afbe7580a7f773cb1566 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Sun, 17 May 2009 18:18:58 -0700 Subject: asm-generic: fix local_add_unless macro `local_add_unless(x, y, z)' will be expanded to `(&(x)->y, (y), (x))', but `&(x)->y' should be `&(x)->a' Signed-off-by: Roel Kluin Cc: Mathieu Desnoyers Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/asm-generic/local.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/asm-generic/local.h b/include/asm-generic/local.h index dbd6150763e..fc218444e31 100644 --- a/include/asm-generic/local.h +++ b/include/asm-generic/local.h @@ -42,7 +42,7 @@ typedef struct #define local_cmpxchg(l, o, n) atomic_long_cmpxchg((&(l)->a), (o), (n)) #define local_xchg(l, n) atomic_long_xchg((&(l)->a), (n)) -#define local_add_unless(l, a, u) atomic_long_add_unless((&(l)->a), (a), (u)) +#define local_add_unless(l, _a, u) atomic_long_add_unless((&(l)->a), (_a), (u)) #define local_inc_not_zero(l) atomic_long_inc_not_zero(&(l)->a) /* Non-atomic variants, ie. preemption disabled and won't be touched -- cgit v1.2.3 From dbf8c11f821b6ff83302c34f2403b4f7231f50ae Mon Sep 17 00:00:00 2001 From: Peter Korsgaard Date: Mon, 18 May 2009 11:13:54 +0100 Subject: mtd_dataflash: unbreak erase support Commit 5b7f3a50 (fix dataflash 64-bit divisions) unfortunately introduced a typo. Erase addr and len were swapped in the pageaddr calculation, causing the wrong sectors to get erased. Signed-off-by: Peter Korsgaard Acked-by: Artem Bityutskiy Signed-off-by: David Woodhouse Signed-off-by: Linus Torvalds --- drivers/mtd/devices/mtd_dataflash.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c index 62dee54af0a..43976aa4dbb 100644 --- a/drivers/mtd/devices/mtd_dataflash.c +++ b/drivers/mtd/devices/mtd_dataflash.c @@ -178,7 +178,7 @@ static int dataflash_erase(struct mtd_info *mtd, struct erase_info *instr) /* Calculate flash page address; use block erase (for speed) if * we're at a block boundary and need to erase the whole block. */ - pageaddr = div_u64(instr->len, priv->page_size); + pageaddr = div_u64(instr->addr, priv->page_size); do_block = (pageaddr & 0x7) == 0 && instr->len >= blocksize; pageaddr = pageaddr << priv->page_offset; -- cgit v1.2.3 From 80193195f87ebca6d7417516d6edeb3969631c15 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Mon, 18 May 2009 13:07:35 +0100 Subject: Fix oops on close of hot-unplugged FTDI serial converter Commit c45d6320 ("fix reference counting of ftdi_private") stopped ftdi_sio_port_remove() from directly freeing the port-private data, with the intention if the port was still open, it would be freed when ftdi_close() is eventually called and releases the last refcount on the structure. That's all very well, but ftdi_sio_port_remove() still contains a call to usb_set_serial_port_data(port, NULL) -- so by the time we get to ftdi_close() for the port which was unplugged, it _still_ oopses on dereferencing that NULL pointer, as it did before (and does in 2.6.29). The fix is just not to clear the private data in ftdi_sio_port_remove(). Then the refcount is properly reduced to zero when the final kref_put() happens in ftdi_close(). Remove a bogus comment too, while we're at it. And stop doing things inside "if (priv)" -- it must _always_ be there. Based loosely on an earlier patch by Daniel Mack, and suggestions by Alan Stern. Signed-off-by: David Woodhouse Tested-by: Daniel Mack Cc: stable@kernel.org Signed-off-by: Linus Torvalds --- drivers/usb/serial/ftdi_sio.c | 9 +-------- 1 file changed, 1 insertion(+), 8 deletions(-) diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 0ab8474b00c..d9fcdaedf38 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -1487,14 +1487,7 @@ static int ftdi_sio_port_remove(struct usb_serial_port *port) remove_sysfs_attrs(port); - /* all open ports are closed at this point - * (by usbserial.c:__serial_close, which calls ftdi_close) - */ - - if (priv) { - usb_set_serial_port_data(port, NULL); - kref_put(&priv->kref, ftdi_sio_priv_release); - } + kref_put(&priv->kref, ftdi_sio_priv_release); return 0; } -- cgit v1.2.3 From 982db66352d31892f624390cfb64a1cea5df765a Mon Sep 17 00:00:00 2001 From: Rabin Vincent Date: Mon, 18 May 2009 17:29:30 +0100 Subject: [ARM] 5518/1: versatile: don't put clock lookups in __initdata Remove the __initdata annotation for the clock lookups, since they will be needed when loading modules which use clk_get(). Signed-off-by: Rabin Vincent Signed-off-by: Russell King --- arch/arm/mach-versatile/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index 1f929c391af..b3bebcc5623 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -413,7 +413,7 @@ static struct clk ref24_clk = { .rate = 24000000, }; -static struct clk_lookup lookups[] __initdata = { +static struct clk_lookup lookups[] = { { /* UART0 */ .dev_id = "dev:f1", .clk = &ref24_clk, -- cgit v1.2.3 From a93ea9b357a4d4fce9a1f65bf9c152fb67c30716 Mon Sep 17 00:00:00 2001 From: Rabin Vincent Date: Mon, 18 May 2009 17:26:08 +0100 Subject: [ARM] 5517/1: integrator: don't put clock lookups in __initdata Remove the __initdata annotation for the clock lookups, since they will be needed when loading modules which use clk_get(). Signed-off-by: Rabin Vincent Signed-off-by: Russell King --- arch/arm/mach-integrator/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c index 6f887291307..a0f60e55da6 100644 --- a/arch/arm/mach-integrator/core.c +++ b/arch/arm/mach-integrator/core.c @@ -121,7 +121,7 @@ static struct clk uartclk = { .rate = 14745600, }; -static struct clk_lookup lookups[] __initdata = { +static struct clk_lookup lookups[] = { { /* UART0 */ .dev_id = "mb:16", .clk = &uartclk, -- cgit v1.2.3 From 2b69a8a2b6e5f5d26a038a6494a88a1a776ac88f Mon Sep 17 00:00:00 2001 From: Eric Moore Date: Mon, 18 May 2009 12:57:24 -0600 Subject: [SCSI] mpt2sas: fix driver version inconsistency In Commit commit 3b8b5c9b1f08660583e5dfe095c24170df62f1d2 Author: Eric Moore Date: Tue Apr 21 15:44:27 2009 -0600 [SCSI] mpt2sas : bump driver version to 01.100.02.00 The MPT2SAS_MAJOR_VERSION didn't get bumped from 00 to 01 so applications will see it incorrectly as 00.100.02.00 driver instead of 01.100.02.00. Fix by making MPT2SAS_MAJOR_VERSION match the major number in MPT2SAS_DRIVER_VERSION Signed-off-by: Eric Moore Signed-off-by: James Bottomley --- drivers/scsi/mpt2sas/mpt2sas_base.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.h b/drivers/scsi/mpt2sas/mpt2sas_base.h index babd4cc0cb2..36b1d1052ba 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_base.h +++ b/drivers/scsi/mpt2sas/mpt2sas_base.h @@ -69,7 +69,7 @@ #define MPT2SAS_AUTHOR "LSI Corporation " #define MPT2SAS_DESCRIPTION "LSI MPT Fusion SAS 2.0 Device Driver" #define MPT2SAS_DRIVER_VERSION "01.100.02.00" -#define MPT2SAS_MAJOR_VERSION 00 +#define MPT2SAS_MAJOR_VERSION 01 #define MPT2SAS_MINOR_VERSION 100 #define MPT2SAS_BUILD_VERSION 02 #define MPT2SAS_RELEASE_VERSION 00 -- cgit v1.2.3 From 775273131810caa41dfc7f9e552ea5d8508caf40 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ilpo=20J=C3=A4rvinen?= Date: Sun, 10 May 2009 20:32:34 +0000 Subject: tcp: fix MSG_PEEK race check MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit 518a09ef11 (tcp: Fix recvmsg MSG_PEEK influence of blocking behavior) lets the loop run longer than the race check did previously expect, so we need to be more careful with this check and consider the work we have been doing. I tried my best to deal with urg hole madness too which happens here: if (!sock_flag(sk, SOCK_URGINLINE)) { ++*seq; ... by using additional offset by one but I certainly have very little interest in testing that part. Signed-off-by: Ilpo Järvinen Tested-by: Frans Pop Tested-by: Ian Zimmermann Signed-off-by: David S. Miller --- net/ipv4/tcp.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index 1d7f49c6f0c..7a0f0b27bf1 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -1321,6 +1321,7 @@ int tcp_recvmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg, struct task_struct *user_recv = NULL; int copied_early = 0; struct sk_buff *skb; + u32 urg_hole = 0; lock_sock(sk); @@ -1532,7 +1533,8 @@ do_prequeue: } } } - if ((flags & MSG_PEEK) && peek_seq != tp->copied_seq) { + if ((flags & MSG_PEEK) && + (peek_seq - copied - urg_hole != tp->copied_seq)) { if (net_ratelimit()) printk(KERN_DEBUG "TCP(%s:%d): Application bug, race in MSG_PEEK.\n", current->comm, task_pid_nr(current)); @@ -1553,6 +1555,7 @@ do_prequeue: if (!urg_offset) { if (!sock_flag(sk, SOCK_URGINLINE)) { ++*seq; + urg_hole++; offset++; used--; if (!used) -- cgit v1.2.3 From c0f84d0d4be3f7d818b4ffb04d27f9bae64397f0 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 18 May 2009 15:12:31 -0700 Subject: sch_teql: should not dereference skb after ndo_start_xmit() It is illegal to dereference a skb after a successful ndo_start_xmit() call. We must store skb length in a local variable instead. Bug was introduced in 2.6.27 by commit 0abf77e55a2459aa9905be4b226e4729d5b4f0cb (net_sched: Add accessor function for packet length for qdiscs) Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/sched/sch_teql.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/net/sched/sch_teql.c b/net/sched/sch_teql.c index ec697cebb63..3b641829723 100644 --- a/net/sched/sch_teql.c +++ b/net/sched/sch_teql.c @@ -303,6 +303,8 @@ restart: switch (teql_resolve(skb, skb_res, slave)) { case 0: if (__netif_tx_trylock(slave_txq)) { + unsigned int length = qdisc_pkt_len(skb); + if (!netif_tx_queue_stopped(slave_txq) && !netif_tx_queue_frozen(slave_txq) && slave_ops->ndo_start_xmit(skb, slave) == 0) { @@ -310,8 +312,7 @@ restart: master->slaves = NEXT_SLAVE(q); netif_wake_queue(dev); master->stats.tx_packets++; - master->stats.tx_bytes += - qdisc_pkt_len(skb); + master->stats.tx_bytes += length; return 0; } __netif_tx_unlock(slave_txq); -- cgit v1.2.3 From c4ca2374312b4de819dd700e72a68395eddb5fcb Mon Sep 17 00:00:00 2001 From: Ajit Khaparde Date: Mon, 18 May 2009 15:38:55 -0700 Subject: be2net: add two new pci device ids to pci device table Signed-off-by: Ajit Khaparde Signed-off-by: David S. Miller --- drivers/net/benet/be.h | 14 ++++++++++++++ drivers/net/benet/be_main.c | 10 +++++----- 2 files changed, 19 insertions(+), 5 deletions(-) diff --git a/drivers/net/benet/be.h b/drivers/net/benet/be.h index c49ddd08b2a..b4bb06fdf30 100644 --- a/drivers/net/benet/be.h +++ b/drivers/net/benet/be.h @@ -35,8 +35,22 @@ #define DRV_VER "2.0.348" #define DRV_NAME "be2net" #define BE_NAME "ServerEngines BladeEngine2 10Gbps NIC" +#define OC_NAME "Emulex OneConnect 10Gbps NIC" #define DRV_DESC BE_NAME "Driver" +#define BE_VENDOR_ID 0x19a2 +#define BE_DEVICE_ID1 0x211 +#define OC_DEVICE_ID1 0x700 +#define OC_DEVICE_ID2 0x701 + +static inline char *nic_name(struct pci_dev *pdev) +{ + if (pdev->device == OC_DEVICE_ID1 || pdev->device == OC_DEVICE_ID2) + return OC_NAME; + else + return BE_NAME; +} + /* Number of bytes of an RX frame that are copied to skb->data */ #define BE_HDR_LEN 64 #define BE_MAX_JUMBO_FRAME_SIZE 9018 diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c index 30d0c81c989..5c378b5e8e4 100644 --- a/drivers/net/benet/be_main.c +++ b/drivers/net/benet/be_main.c @@ -28,10 +28,10 @@ static unsigned int rx_frag_size = 2048; module_param(rx_frag_size, uint, S_IRUGO); MODULE_PARM_DESC(rx_frag_size, "Size of a fragment that holds rcvd data."); -#define BE_VENDOR_ID 0x19a2 -#define BE2_DEVICE_ID_1 0x0211 static DEFINE_PCI_DEVICE_TABLE(be_dev_ids) = { - { PCI_DEVICE(BE_VENDOR_ID, BE2_DEVICE_ID_1) }, + { PCI_DEVICE(BE_VENDOR_ID, BE_DEVICE_ID1) }, + { PCI_DEVICE(BE_VENDOR_ID, OC_DEVICE_ID1) }, + { PCI_DEVICE(BE_VENDOR_ID, OC_DEVICE_ID2) }, { 0 } }; MODULE_DEVICE_TABLE(pci, be_dev_ids); @@ -1859,7 +1859,7 @@ static int __devinit be_probe(struct pci_dev *pdev, if (status != 0) goto stats_clean; - dev_info(&pdev->dev, BE_NAME " port %d\n", adapter->port_num); + dev_info(&pdev->dev, "%s port %d\n", nic_name(pdev), adapter->port_num); return 0; stats_clean: @@ -1873,7 +1873,7 @@ rel_reg: disable_dev: pci_disable_device(pdev); do_none: - dev_warn(&pdev->dev, BE_NAME " initialization failed\n"); + dev_err(&pdev->dev, "%s initialization failed\n", nic_name(pdev)); return status; } -- cgit v1.2.3 From 511e11e396dc596825ce04d53d7f6d579404bc01 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 18 May 2009 19:26:37 -0700 Subject: pkt_sched: gen_estimator: use 64 bit intermediate counters for bps gen_estimator can overflow bps (bytes per second) with Gb links, while it was designed with a u32 API, with a theorical limit of 34360Mbit (2^32 bytes) Using 64 bit intermediate avbps/brate counters can allow us to reach this theorical limit. Signed-off-by: Eric Dumazet Signed-off-by: Jarek Poplawski Signed-off-by: David S. Miller --- net/core/gen_estimator.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/net/core/gen_estimator.c b/net/core/gen_estimator.c index 9cc9f95b109..6d62d4618cf 100644 --- a/net/core/gen_estimator.c +++ b/net/core/gen_estimator.c @@ -66,9 +66,9 @@ NOTES. - * The stored value for avbps is scaled by 2^5, so that maximal - rate is ~1Gbit, avpps is scaled by 2^10. - + * avbps is scaled by 2^5, avpps is scaled by 2^10. + * both values are reported as 32 bit unsigned values. bps can + overflow for fast links : max speed being 34360Mbit/sec * Minimal interval is HZ/4=250msec (it is the greatest common divisor for HZ=100 and HZ=1024 8)), maximal interval is (HZ*2^EST_MAX_INTERVAL)/4 = 8sec. Shorter intervals @@ -86,9 +86,9 @@ struct gen_estimator spinlock_t *stats_lock; int ewma_log; u64 last_bytes; + u64 avbps; u32 last_packets; u32 avpps; - u32 avbps; struct rcu_head e_rcu; struct rb_node node; }; @@ -115,6 +115,7 @@ static void est_timer(unsigned long arg) rcu_read_lock(); list_for_each_entry_rcu(e, &elist[idx].list, list) { u64 nbytes; + u64 brate; u32 npackets; u32 rate; @@ -125,9 +126,9 @@ static void est_timer(unsigned long arg) nbytes = e->bstats->bytes; npackets = e->bstats->packets; - rate = (nbytes - e->last_bytes)<<(7 - idx); + brate = (nbytes - e->last_bytes)<<(7 - idx); e->last_bytes = nbytes; - e->avbps += ((long)rate - (long)e->avbps) >> e->ewma_log; + e->avbps += ((s64)(brate - e->avbps)) >> e->ewma_log; e->rate_est->bps = (e->avbps+0xF)>>5; rate = (npackets - e->last_packets)<<(12 - idx); -- cgit v1.2.3 From 7ee2cb7f32b299c2b06a31fde155457203e4b7dd Mon Sep 17 00:00:00 2001 From: Frank Filz Date: Mon, 18 May 2009 17:41:40 -0400 Subject: nfs: Fix NFS v4 client handling of MAY_EXEC in nfs_permission. The problem is that permission checking is skipped if atomic open is possible, but when exec opens a file, it just opens it O_READONLY which means EXEC permission will not be checked at that time. This problem is observed by the following sequence (executed as root): mount -t nfs4 server:/ /mnt4 echo "ls" >/mnt4/foo chmod 744 /mnt4/foo su guest -c "mnt4/foo" Signed-off-by: Frank Filz Signed-off-by: Trond Myklebust Cc: stable@kernel.org Tested-by: Eugene Teo Signed-off-by: Linus Torvalds --- fs/nfs/dir.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c index 370b190a09d..89f98e9a024 100644 --- a/fs/nfs/dir.c +++ b/fs/nfs/dir.c @@ -1943,7 +1943,8 @@ int nfs_permission(struct inode *inode, int mask) case S_IFREG: /* NFSv4 has atomic_open... */ if (nfs_server_capable(inode, NFS_CAP_ATOMIC_OPEN) - && (mask & MAY_OPEN)) + && (mask & MAY_OPEN) + && !(mask & MAY_EXEC)) goto out; break; case S_IFDIR: -- cgit v1.2.3 From 995b337952cdf7e05d288eede580257b632a8343 Mon Sep 17 00:00:00 2001 From: Thomas Chenault Date: Mon, 18 May 2009 21:43:27 -0700 Subject: net: fix skb_seq_read returning wrong offset/length for page frag data When called with a consumed value that is less than skb_headlen(skb) bytes into a page frag, skb_seq_read() incorrectly returns an offset/length relative to skb->data. Ensure that data which should come from a page frag does. Signed-off-by: Thomas Chenault Tested-by: Shyam Iyer Signed-off-by: David S. Miller --- net/core/skbuff.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/core/skbuff.c b/net/core/skbuff.c index d152394b261..e505b5392e1 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -2288,7 +2288,7 @@ unsigned int skb_seq_read(unsigned int consumed, const u8 **data, next_skb: block_limit = skb_headlen(st->cur_skb) + st->stepped_offset; - if (abs_offset < block_limit) { + if (abs_offset < block_limit && !st->frag_data) { *data = st->cur_skb->data + (abs_offset - st->stepped_offset); return block_limit - abs_offset; } -- cgit v1.2.3 From bc8a5397433e4effbaddfa7e462d10b3c060cabb Mon Sep 17 00:00:00 2001 From: Frans Pop Date: Mon, 18 May 2009 21:48:38 -0700 Subject: ipv4: make default for INET_LRO consistent with help text Commit e81963b1 ("ipv4: Make INET_LRO a bool instead of tristate.") changed this config from tristate to bool. Add default so that it is consistent with the help text. Signed-off-by: Frans Pop Signed-off-by: David S. Miller --- net/ipv4/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv4/Kconfig b/net/ipv4/Kconfig index 9d26a3da37e..5b919f7b45d 100644 --- a/net/ipv4/Kconfig +++ b/net/ipv4/Kconfig @@ -408,7 +408,7 @@ config INET_XFRM_MODE_BEET config INET_LRO bool "Large Receive Offload (ipv4/tcp)" - + default y ---help--- Support for Large Receive Offload (ipv4/tcp). -- cgit v1.2.3 From 28afea5b2ffaa48f4f43d22ae8edcc384c05df80 Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Tue, 19 May 2009 08:25:48 +0200 Subject: xen/blkfront: allow xenbus state transition to Closing->Closed when not Connected This situation can occur when attempting to attach a block device whose backend is an empty physical CD-ROM driver. The backend in this case will go directly from the Initialising state to Closing->Closed. Previously this would result in a NULL pointer deref on info->gd (xenbus_dev_fatal does not return as a1a15ac5 seems to expect) Cc: stable@kernel.org Signed-off-by: Ian Campbell Acked-by: Jeremy Fitzhardinge Signed-off-by: Jens Axboe --- drivers/block/xen-blkfront.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c index 8f905089b72..6971a12e8b9 100644 --- a/drivers/block/xen-blkfront.c +++ b/drivers/block/xen-blkfront.c @@ -977,8 +977,10 @@ static void backend_changed(struct xenbus_device *dev, break; case XenbusStateClosing: - if (info->gd == NULL) - xenbus_dev_fatal(dev, -ENODEV, "gd is NULL"); + if (info->gd == NULL) { + xenbus_frontend_closed(dev); + break; + } bd = bdget_disk(info->gd, 0); if (bd == NULL) xenbus_dev_fatal(dev, -ENODEV, "bdget failed"); -- cgit v1.2.3 From 31a14400e8f365e5d4d1a0b2a1ef4d5405d6091e Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Tue, 19 May 2009 08:27:42 +0200 Subject: xen/blkfront: fix warning when deleting gendisk on unplug/shutdown Currently blkfront gives a warning when hot unplugging due to calling del_gendisk() with interrupts disabled (due to blkif_io_lock). WARNING: at kernel/softirq.c:124 local_bh_enable+0x36/0x84() Modules linked in: xenfs xen_netfront ext3 jbd mbcache xen_blkfront Pid: 13, comm: xenwatch Not tainted 2.6.29-xs5.5.0.13 #3 Call Trace: [] warn_slowpath+0x80/0xb6 [] xen_sched_clock+0x16/0x63 [] xen_force_evtchn_callback+0xc/0x10 [] check_events+0x8/0xe [] xen_restore_fl_direct_end+0x0/0x1 [] xen_mc_flush+0x10a/0x13f [] __switch_to+0x114/0x14e [] dequeue_task+0x62/0x70 [] finish_task_switch+0x2b/0x84 [] schedule+0x66d/0x6e7 [] xen_force_evtchn_callback+0xc/0x10 [] xen_force_evtchn_callback+0xc/0x10 [] local_bh_enable+0x36/0x84 [] sk_filter+0x57/0x5c [] netlink_broadcast+0x1d5/0x315 [] kobject_uevent_env+0x28d/0x331 [] device_del+0x10f/0x120 [] device_unregister+0x8/0x10 [] bdi_unregister+0x2d/0x39 [] unlink_gendisk+0x23/0x3e [] del_gendisk+0x7b/0xe7 [] blkfront_closing+0x28/0x6e [xen_blkfront] [] backend_changed+0x3ad/0x41d [xen_blkfront] We can fix this by calling del_gendisk() later in blkfront_closing, after releasing blkif_io_lock. Since the queue is stopped during the interrupts disabled phase I don't think there is any danger of an event occuring between releasing the blkif_io_lock and deleting the disk. Signed-off-by: Ian Campbell Cc: Jeremy Fitzhardinge Signed-off-by: Jens Axboe --- drivers/block/xen-blkfront.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c index 6971a12e8b9..a6cbf7b808e 100644 --- a/drivers/block/xen-blkfront.c +++ b/drivers/block/xen-blkfront.c @@ -934,8 +934,6 @@ static void blkfront_closing(struct xenbus_device *dev) spin_lock_irqsave(&blkif_io_lock, flags); - del_gendisk(info->gd); - /* No more blkif_request(). */ blk_stop_queue(info->rq); @@ -949,6 +947,8 @@ static void blkfront_closing(struct xenbus_device *dev) blk_cleanup_queue(info->rq); info->rq = NULL; + del_gendisk(info->gd); + out: xenbus_frontend_closed(dev); } -- cgit v1.2.3 From 8b6427a2a8f7dd43e9208fb33a3b116d66db4979 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Tue, 19 May 2009 09:57:03 -0400 Subject: cifs: fix pointer initialization and checks in cifs_follow_symlink (try #4) This is the third respin of the patch posted yesterday to fix the error handling in cifs_follow_symlink. It also includes a fix for a bogus NULL pointer check in CIFSSMBQueryUnixSymLink that Jeff Moyer spotted. It's possible for CIFSSMBQueryUnixSymLink to return without setting target_path to a valid pointer. If that happens then the current value to which we're initializing this pointer could cause an oops when it's kfree'd. This patch is a little more comprehensive than the last patches. It reorganizes cifs_follow_link a bit for (hopefully) better readability. It should also eliminate the uneeded allocation of full_path on servers without unix extensions (assuming they can get to this point anyway, of which I'm not convinced). On a side note, I'm not sure I agree with the logic of enabling this query even when unix extensions are disabled on the client. It seems like that should disable this as well. But, changing that is outside the scope of this fix, so I've left it alone for now. Reported-by: Jeff Moyer Signed-off-by: Jeff Layton Reviewed-by: Jeff Moyer Reviewed-by: Christoph Hellwig Signed-off-by: Steve French --- fs/cifs/cifssmb.c | 2 +- fs/cifs/link.c | 52 ++++++++++++++++++++++++++-------------------------- 2 files changed, 27 insertions(+), 27 deletions(-) diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c index 5759ba53dc9..d06260251c3 100644 --- a/fs/cifs/cifssmb.c +++ b/fs/cifs/cifssmb.c @@ -2475,7 +2475,7 @@ querySymLinkRetry: /* BB FIXME investigate remapping reserved chars here */ *symlinkinfo = cifs_strndup_from_ucs(data_start, count, is_unicode, nls_codepage); - if (!symlinkinfo) + if (!*symlinkinfo) rc = -ENOMEM; } } diff --git a/fs/cifs/link.c b/fs/cifs/link.c index ea9d11e3dcb..cd83c53fcbb 100644 --- a/fs/cifs/link.c +++ b/fs/cifs/link.c @@ -107,48 +107,48 @@ void * cifs_follow_link(struct dentry *direntry, struct nameidata *nd) { struct inode *inode = direntry->d_inode; - int rc = -EACCES; + int rc = -ENOMEM; int xid; char *full_path = NULL; - char *target_path = ERR_PTR(-ENOMEM); - struct cifs_sb_info *cifs_sb; - struct cifsTconInfo *pTcon; + char *target_path = NULL; + struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb); + struct cifsTconInfo *tcon = cifs_sb->tcon; xid = GetXid(); - full_path = build_path_from_dentry(direntry); + /* + * For now, we just handle symlinks with unix extensions enabled. + * Eventually we should handle NTFS reparse points, and MacOS + * symlink support. For instance... + * + * rc = CIFSSMBQueryReparseLinkInfo(...) + * + * For now, just return -EACCES when the server doesn't support posix + * extensions. Note that we still allow querying symlinks when posix + * extensions are manually disabled. We could disable these as well + * but there doesn't seem to be any harm in allowing the client to + * read them. + */ + if (!(tcon->ses->capabilities & CAP_UNIX)) { + rc = -EACCES; + goto out; + } + full_path = build_path_from_dentry(direntry); if (!full_path) goto out; cFYI(1, ("Full path: %s inode = 0x%p", full_path, inode)); - cifs_sb = CIFS_SB(inode->i_sb); - pTcon = cifs_sb->tcon; - - /* We could change this to: - if (pTcon->unix_ext) - but there does not seem any point in refusing to - get symlink info if we can, even if unix extensions - turned off for this mount */ - - if (pTcon->ses->capabilities & CAP_UNIX) - rc = CIFSSMBUnixQuerySymLink(xid, pTcon, full_path, - &target_path, - cifs_sb->local_nls); - else { - /* BB add read reparse point symlink code here */ - /* rc = CIFSSMBQueryReparseLinkInfo */ - /* BB Add code to Query ReparsePoint info */ - /* BB Add MAC style xsymlink check here if enabled */ - } + rc = CIFSSMBUnixQuerySymLink(xid, tcon, full_path, &target_path, + cifs_sb->local_nls); + kfree(full_path); +out: if (rc != 0) { kfree(target_path); target_path = ERR_PTR(rc); } - kfree(full_path); -out: FreeXid(xid); nd_set_link(nd, target_path); return NULL; -- cgit v1.2.3 From 26a9a418237c0b06528941bca693c49c8d97edbe Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 19 May 2009 11:25:35 -0700 Subject: Avoid ICE in get_random_int() with gcc-3.4.5 Martin Knoblauch reports that trying to build 2.6.30-rc6-git3 with RHEL4.3 userspace (gcc (GCC) 3.4.5 20051201 (Red Hat 3.4.5-2)) causes an internal compiler error (ICE): drivers/char/random.c: In function `get_random_int': drivers/char/random.c:1672: error: unrecognizable insn: (insn 202 148 150 0 /scratch/build/linux-2.6.30-rc6-git3/arch/x86/include/asm/tsc.h:23 (set (reg:SI 0 ax [91]) (subreg:SI (plus:DI (plus:DI (reg:DI 0 ax [88]) (subreg:DI (reg:SI 6 bp) 0)) (const_int -4 [0xfffffffffffffffc])) 0)) -1 (nil) (nil)) drivers/char/random.c:1672: internal compiler error: in extract_insn, at recog.c:2083 and after some debugging it turns out that it's due to the code trying to figure out the rough value of the current stack pointer by taking an address of an uninitialized variable and casting that to an integer. This is clearly a compiler bug, but it's not worth fighting - while the current stack kernel pointer might be somewhat hard to predict in user space, it's also not generally going to change for a lot of the call chains for a particular process. So just drop it, and mumble some incoherent curses at the compiler. Tested-by: Martin Knoblauch Cc: Matt Mackall Cc: Ingo Molnar Signed-off-by: Linus Torvalds --- drivers/char/random.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/char/random.c b/drivers/char/random.c index b2ced39d76b..8c7444857a4 100644 --- a/drivers/char/random.c +++ b/drivers/char/random.c @@ -1673,7 +1673,7 @@ unsigned int get_random_int(void) int ret; keyptr = get_keyptr(); - hash[0] += current->pid + jiffies + get_cycles() + (int)(long)&ret; + hash[0] += current->pid + jiffies + get_cycles(); ret = half_md4_transform(hash, keyptr->secret); put_cpu_var(get_random_int_hash); -- cgit v1.2.3 From b126d113484886d900179b4ae55ea7fabe15f936 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 30 Apr 2009 14:48:36 +0100 Subject: mfd: Keep a cache of WM8350 volatile values Due to the way that the WM8350 audio driver handles CODEC_ENA many of the WM8350 audio registers are marked as volatile when they aren't actually so. Allow the audio driver to see a cache of these values for inspection during interrupt context. To do this we need to stop satisfying any bits from volatile registers from cache - there's no real benefit from doing so anyway, we did the read already. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/wm8350-core.c | 8 -------- 1 file changed, 8 deletions(-) diff --git a/drivers/mfd/wm8350-core.c b/drivers/mfd/wm8350-core.c index c2be3088e2e..fe24079387c 100644 --- a/drivers/mfd/wm8350-core.c +++ b/drivers/mfd/wm8350-core.c @@ -79,10 +79,6 @@ static int wm8350_phys_read(struct wm8350 *wm8350, u8 reg, int num_regs, /* Cache is CPU endian */ dest[i - reg] = be16_to_cpu(dest[i - reg]); - /* Satisfy non-volatile bits from cache */ - dest[i - reg] &= wm8350_reg_io_map[i].vol; - dest[i - reg] |= wm8350->reg_cache[i]; - /* Mask out non-readable bits */ dest[i - reg] &= wm8350_reg_io_map[i].readable; } @@ -182,9 +178,6 @@ static int wm8350_write(struct wm8350 *wm8350, u8 reg, int num_regs, u16 *src) (wm8350->reg_cache[i] & ~wm8350_reg_io_map[i].writable) | src[i - reg]; - /* Don't store volatile bits */ - wm8350->reg_cache[i] &= ~wm8350_reg_io_map[i].vol; - src[i - reg] = cpu_to_be16(src[i - reg]); } @@ -1261,7 +1254,6 @@ static int wm8350_create_cache(struct wm8350 *wm8350, int type, int mode) (i < WM8350_CLOCK_CONTROL_1 || i > WM8350_AIF_TEST)) { value = be16_to_cpu(wm8350->reg_cache[i]); value &= wm8350_reg_io_map[i].readable; - value &= ~wm8350_reg_io_map[i].vol; wm8350->reg_cache[i] = value; } else wm8350->reg_cache[i] = reg_map[i]; -- cgit v1.2.3 From f43ab901005c2bb3c5440e91b6efae9f5db02e7c Mon Sep 17 00:00:00 2001 From: Nelson Castillo Date: Tue, 12 May 2009 13:26:47 -0700 Subject: mfd: pcf50633: fix unsafe disable_irq() Without this change Openmoko Freerunner (GTA02) bootstrap will deadlock. As pointed out in other patches this issue is in the wild since the merge of: : commit 3aa551c9b4c40018f0e261a178e3d25478dc04a9 : Author: Thomas Gleixner : Date: Mon Mar 23 18:28:15 2009 +0100 : : genirq: add threaded interrupt handler support : : Add support for threaded interrupt handlers Signed-off-by: Nelson Castillo Cc: Ingo Molnar Cc: Cc: Thomas Gleixner Signed-off-by: Andrew Morton Signed-off-by: Samuel Ortiz --- drivers/mfd/pcf50633-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mfd/pcf50633-core.c b/drivers/mfd/pcf50633-core.c index 7793932a513..11a6248cc1c 100644 --- a/drivers/mfd/pcf50633-core.c +++ b/drivers/mfd/pcf50633-core.c @@ -443,7 +443,7 @@ static irqreturn_t pcf50633_irq(int irq, void *data) dev_dbg(pcf->dev, "pcf50633_irq\n"); get_device(pcf->dev); - disable_irq(pcf->irq); + disable_irq_nosync(pcf->irq); schedule_work(&pcf->irq_work); return IRQ_HANDLED; -- cgit v1.2.3 From 33252572e727ccdcc54efdb67157e7ab3d6942db Mon Sep 17 00:00:00 2001 From: Nico Schottelius Date: Sat, 16 May 2009 14:00:56 +0200 Subject: Fix scripts/setlocalversion with tagged git commit Produce correct output for - tagged commit (v2.6.30-rc6) - past tagged commit (v2.6.30-rc5-299-g7c7327d) - no tag Signed-off-by: Linus Torvalds --- scripts/setlocalversion | 30 +++++++++++++++++++++++------- 1 file changed, 23 insertions(+), 7 deletions(-) diff --git a/scripts/setlocalversion b/scripts/setlocalversion index 32c8554f394..00790472f64 100755 --- a/scripts/setlocalversion +++ b/scripts/setlocalversion @@ -1,5 +1,13 @@ #!/bin/sh -# Print additional version information for non-release trees. +# +# This scripts adds local version information from the version +# control systems git, mercurial (hg) and subversion (svn). +# +# If something goes wrong, send a mail the kernel build mailinglist +# (see MAINTAINERS) and CC Nico Schottelius +# . +# +# usage() { echo "Usage: $0 [srctree]" >&2 @@ -10,12 +18,20 @@ cd "${1:-.}" || usage # Check for git and a git repo. if head=`git rev-parse --verify --short HEAD 2>/dev/null`; then - # Do we have an untagged tag? - if atag=`git describe 2>/dev/null`; then - echo "$atag" | awk -F- '{printf("-%05d-%s", $(NF-1),$(NF))}' - # add -g${head}, if there is no usable tag - else - printf '%s%s' -g $head + + # If we are at a tagged commit (like "v2.6.30-rc6"), we ignore it, + # because this version is defined in the top level Makefile. + if [ -z "`git describe --exact-match 2>/dev/null`" ]; then + + # If we are past a tagged commit (like "v2.6.30-rc5-302-g72357d5"), + # we pretty print it. + if atag="`git describe 2>/dev/null`"; then + echo "$atag" | awk -F- '{printf("-%05d-%s", $(NF-1),$(NF))}' + + # If we don't have a tag at all we print -g{commitish}. + else + printf '%s%s' -g $head + fi fi # Is this git on svn? -- cgit v1.2.3 From 64d1304a64477629cb16b75491a77bafe6f86963 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 18 May 2009 21:20:10 +0200 Subject: futex: setup writeable mapping for futex ops which modify user space data The futex code installs a read only mapping via get_user_pages_fast() even if the futex op function has to modify user space data. The eventual fault was fixed up by futex_handle_fault() which walked the VMA with mmap_sem held. After the cleanup patches which removed the mmap_sem dependency of the futex code commit 4dc5b7a36a49eff97050894cf1b3a9a02523717 (futex: clean up fault logic) removed the private VMA walk logic from the futex code. This change results in a stale RO mapping which is not fixed up. Instead of reintroducing the previous fault logic we set up the mapping in get_user_pages_fast() read/write for all operations which modify user space data. Also handle private futexes in the same way and make the current unconditional access_ok(VERIFY_WRITE) depend on the futex op. Reported-by: Andreas Schwab Signed-off-by: Thomas Gleixner CC: stable@kernel.org --- kernel/futex.c | 24 +++++++++++++----------- 1 file changed, 13 insertions(+), 11 deletions(-) diff --git a/kernel/futex.c b/kernel/futex.c index eef8cd26b5e..d546b2d53a6 100644 --- a/kernel/futex.c +++ b/kernel/futex.c @@ -193,6 +193,7 @@ static void drop_futex_key_refs(union futex_key *key) * @uaddr: virtual address of the futex * @fshared: 0 for a PROCESS_PRIVATE futex, 1 for PROCESS_SHARED * @key: address where result is stored. + * @rw: mapping needs to be read/write (values: VERIFY_READ, VERIFY_WRITE) * * Returns a negative error code or 0 * The key words are stored in *key on success. @@ -203,7 +204,8 @@ static void drop_futex_key_refs(union futex_key *key) * * lock_page() might sleep, the caller should not hold a spinlock. */ -static int get_futex_key(u32 __user *uaddr, int fshared, union futex_key *key) +static int +get_futex_key(u32 __user *uaddr, int fshared, union futex_key *key, int rw) { unsigned long address = (unsigned long)uaddr; struct mm_struct *mm = current->mm; @@ -226,7 +228,7 @@ static int get_futex_key(u32 __user *uaddr, int fshared, union futex_key *key) * but access_ok() should be faster than find_vma() */ if (!fshared) { - if (unlikely(!access_ok(VERIFY_WRITE, uaddr, sizeof(u32)))) + if (unlikely(!access_ok(rw, uaddr, sizeof(u32)))) return -EFAULT; key->private.mm = mm; key->private.address = address; @@ -235,7 +237,7 @@ static int get_futex_key(u32 __user *uaddr, int fshared, union futex_key *key) } again: - err = get_user_pages_fast(address, 1, 0, &page); + err = get_user_pages_fast(address, 1, rw == VERIFY_WRITE, &page); if (err < 0) return err; @@ -677,7 +679,7 @@ static int futex_wake(u32 __user *uaddr, int fshared, int nr_wake, u32 bitset) if (!bitset) return -EINVAL; - ret = get_futex_key(uaddr, fshared, &key); + ret = get_futex_key(uaddr, fshared, &key, VERIFY_READ); if (unlikely(ret != 0)) goto out; @@ -723,10 +725,10 @@ futex_wake_op(u32 __user *uaddr1, int fshared, u32 __user *uaddr2, int ret, op_ret; retry: - ret = get_futex_key(uaddr1, fshared, &key1); + ret = get_futex_key(uaddr1, fshared, &key1, VERIFY_READ); if (unlikely(ret != 0)) goto out; - ret = get_futex_key(uaddr2, fshared, &key2); + ret = get_futex_key(uaddr2, fshared, &key2, VERIFY_WRITE); if (unlikely(ret != 0)) goto out_put_key1; @@ -814,10 +816,10 @@ static int futex_requeue(u32 __user *uaddr1, int fshared, u32 __user *uaddr2, int ret, drop_count = 0; retry: - ret = get_futex_key(uaddr1, fshared, &key1); + ret = get_futex_key(uaddr1, fshared, &key1, VERIFY_READ); if (unlikely(ret != 0)) goto out; - ret = get_futex_key(uaddr2, fshared, &key2); + ret = get_futex_key(uaddr2, fshared, &key2, VERIFY_READ); if (unlikely(ret != 0)) goto out_put_key1; @@ -1140,7 +1142,7 @@ static int futex_wait(u32 __user *uaddr, int fshared, q.bitset = bitset; retry: q.key = FUTEX_KEY_INIT; - ret = get_futex_key(uaddr, fshared, &q.key); + ret = get_futex_key(uaddr, fshared, &q.key, VERIFY_READ); if (unlikely(ret != 0)) goto out; @@ -1330,7 +1332,7 @@ static int futex_lock_pi(u32 __user *uaddr, int fshared, q.pi_state = NULL; retry: q.key = FUTEX_KEY_INIT; - ret = get_futex_key(uaddr, fshared, &q.key); + ret = get_futex_key(uaddr, fshared, &q.key, VERIFY_WRITE); if (unlikely(ret != 0)) goto out; @@ -1594,7 +1596,7 @@ retry: if ((uval & FUTEX_TID_MASK) != task_pid_vnr(current)) return -EPERM; - ret = get_futex_key(uaddr, fshared, &key); + ret = get_futex_key(uaddr, fshared, &key, VERIFY_WRITE); if (unlikely(ret != 0)) goto out; -- cgit v1.2.3 From b3bad72e494fb2ff0c81be4ca2ddb94adf6a47c2 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sun, 17 May 2009 20:17:06 +0200 Subject: PCI PM: Fix initialization and kexec breakage for some devices Recent PCI PM changes introduced a bug that causes some devices to be mishandled after kexec and during early initialization. The failure scenario in the kexec case is the following: * Assume a PCI device is not power-manageable by the platform and has PCI_PM_CTRL_NO_SOFT_RESET set in PMCSR. * The device is put into D3 before kexec (using the native PCI PM). * After kexec, pci_setup_device() sets the device's power state to PCI_UNKNOWN. * pci_set_power_state(dev, PCI_D0) is called by the device's driver. * __pci_start_power_transition(dev, PCI_D0) is called and since the device is not power-manageable by the platform, it causes pci_update_current_state(dev, PCI_D0) to be called. As a result the device's current_state field is updated to PCI_D3, in accordance with the contents of its PCI PM registers. * pci_raw_set_power_state() is called and it changes the device power state to D0. *However*, it should also call pci_restore_bars() to reinitialize the device, but it doesn't, because the device's current_state field has been modified earlier. To prevent this from happening, modify pci_platform_power_transition() so that it doesn't use pci_update_current_state() to update the current_state field for devices that aren't power-manageable by the platform. Instead, this field should be updated directly for devices that don't support the native PCI PM. Signed-off-by: Rafael J. Wysocki Signed-off-by: Jesse Barnes --- drivers/pci/pci.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 34bf0fdf504..1a91bf9687a 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -557,7 +557,8 @@ static int pci_platform_power_transition(struct pci_dev *dev, pci_power_t state) } else { error = -ENODEV; /* Fall back to PCI_D0 if native PM is not supported */ - pci_update_current_state(dev, PCI_D0); + if (!dev->pm_cap) + dev->current_state = PCI_D0; } return error; -- cgit v1.2.3 From fbaa58696cef848de818768783ef185bd3f05158 Mon Sep 17 00:00:00 2001 From: Eric Paris Date: Wed, 13 May 2009 12:50:40 -0400 Subject: TPM: get_event_name stack corruption get_event_name uses sprintf to fill a buffer declared on the stack. It fills the buffer 2 bytes at a time. What the code doesn't take into account is that sprintf(buf, "%02x", data) actually writes 3 bytes. 2 bytes for the data and then it nul terminates the string. Since we declare buf to be 40 characters long and then we write 40 bytes of data into buf sprintf is going to write 41 characters. The fix is to leave room in buf for the nul terminator. Signed-off-by: Eric Paris Signed-off-by: James Morris --- drivers/char/tpm/tpm_bios.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/char/tpm/tpm_bios.c b/drivers/char/tpm/tpm_bios.c index ed306eb1057..0c2f55a38b9 100644 --- a/drivers/char/tpm/tpm_bios.c +++ b/drivers/char/tpm/tpm_bios.c @@ -212,7 +212,8 @@ static int get_event_name(char *dest, struct tcpa_event *event, unsigned char * event_entry) { const char *name = ""; - char data[40] = ""; + /* 41 so there is room for 40 data and 1 nul */ + char data[41] = ""; int i, n_len = 0, d_len = 0; struct tcpa_pc_event *pc_event; -- cgit v1.2.3 From b674137755bbe2750f997a2a1264db3cdf8abcb3 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Mon, 18 May 2009 11:56:16 +1000 Subject: drm: Round size of SHM maps to PAGE_SIZE Currently, userspace can fail to obtain the SAREA mapping (among other reasons) if it passes SAREA_MAX to drmAddMap without aligning it to the page size. This breaks for example on PowerPC with 64K pages and radeon despite the kernel radeon actually doing the right rouding in the first place. The way SAREA_MAX is defined with a bunch of ifdef's and duplicated between libdrm and the X server is gross, ultimately it should be retrieved by userspace from the kernel, but in the meantime, we have plenty of existing userspace built with bad values that need to work. This patch works around broken userspace by rounding the requested size in drm_addmap_core() of any SHM map to the page size. Since the backing memory for SHM maps is also allocated within addmap_core, there is no danger of adjacent memory being exposed due to the increased map size. The only side effect is that drivers that previously tried to create or access SHM maps using a size < PAGE_SIZE and failed (getting -EINVAL), will now succeed at the cost of a little bit more memory used if that happens to be when the map is created. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Jesse Barnes --- drivers/gpu/drm/drm_bufs.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/gpu/drm/drm_bufs.c b/drivers/gpu/drm/drm_bufs.c index 6d80d17f1e9..0411d912d82 100644 --- a/drivers/gpu/drm/drm_bufs.c +++ b/drivers/gpu/drm/drm_bufs.c @@ -170,6 +170,14 @@ static int drm_addmap_core(struct drm_device * dev, resource_size_t offset, } DRM_DEBUG("offset = 0x%08llx, size = 0x%08lx, type = %d\n", (unsigned long long)map->offset, map->size, map->type); + + /* page-align _DRM_SHM maps. They are allocated here so there is no security + * hole created by that and it works around various broken drivers that use + * a non-aligned quantity to map the SAREA. --BenH + */ + if (map->type == _DRM_SHM) + map->size = PAGE_ALIGN(map->size); + if ((map->offset & (~(resource_size_t)PAGE_MASK)) || (map->size & (~PAGE_MASK))) { drm_free(map, sizeof(*map), DRM_MEM_MAPS); return -EINVAL; -- cgit v1.2.3 From d3375ea7213d09284ee3683d8bc075b9d3786a03 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Wed, 20 May 2009 08:42:06 +0200 Subject: cdrom: beyond ARRAY_SIZE of viocd_diskinfo Do not go beyond ARRAY_SIZE of viocd_diskinfo Signed-off-by: Roel Kluin Signed-off-by: Jens Axboe --- drivers/cdrom/viocd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/cdrom/viocd.c b/drivers/cdrom/viocd.c index 13929356135..9b1624e0dde 100644 --- a/drivers/cdrom/viocd.c +++ b/drivers/cdrom/viocd.c @@ -587,7 +587,7 @@ static int viocd_probe(struct vio_dev *vdev, const struct vio_device_id *id) struct device_node *node = vdev->dev.archdata.of_node; deviceno = vdev->unit_address; - if (deviceno > VIOCD_MAX_CD) + if (deviceno >= VIOCD_MAX_CD) return -ENODEV; if (!node) return -ENODEV; -- cgit v1.2.3 From b3b778b387ed3849ebc4a51baf8617be90df6625 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 20 May 2009 17:05:52 +0200 Subject: ALSA: pcsp - fix printk format warning again The commit 5a641bcd6398841cc4606b0a732d41a09256fd94 changed the printk format to '%lu', but the value passed seems to be dependent on the architecture. On x86-64, I got a new warning now because an int value is passed actaully. As a workaround, just cast the value always to unsigned long. Signed-off-by: Takashi Iwai --- sound/drivers/pcsp/pcsp_mixer.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/drivers/pcsp/pcsp_mixer.c b/sound/drivers/pcsp/pcsp_mixer.c index 771955a9be7..199b0337714 100644 --- a/sound/drivers/pcsp/pcsp_mixer.c +++ b/sound/drivers/pcsp/pcsp_mixer.c @@ -51,7 +51,7 @@ static int pcsp_treble_info(struct snd_kcontrol *kcontrol, if (uinfo->value.enumerated.item > chip->max_treble) uinfo->value.enumerated.item = chip->max_treble; sprintf(uinfo->value.enumerated.name, "%lu", - PCSP_CALC_RATE(uinfo->value.enumerated.item)); + (unsigned long)PCSP_CALC_RATE(uinfo->value.enumerated.item)); return 0; } -- cgit v1.2.3 From 950312ce22696ddfa42a957bdadaa9c24151e679 Mon Sep 17 00:00:00 2001 From: Andrew Randrianasulu Date: Thu, 14 May 2009 11:29:27 -0700 Subject: MIPS: IP32: Fix hang on shutdown in power button interrupt handler. The hang was caused by the use of disable_irq() from the interrupt handler itself. Fixed by the use of disable_irq_nosync(). The issue was triggered by: commit 3aa551c9b4c40018f0e261a178e3d25478dc04a9 Author: Thomas Gleixner Date: Mon Mar 23 18:28:15 2009 +0100 genirq: add threaded interrupt handler support Signed-off-by: Ralf Baechle --- arch/mips/sgi-ip32/ip32-reset.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/sgi-ip32/ip32-reset.c b/arch/mips/sgi-ip32/ip32-reset.c index b6cab089561..667da932b7b 100644 --- a/arch/mips/sgi-ip32/ip32-reset.c +++ b/arch/mips/sgi-ip32/ip32-reset.c @@ -145,7 +145,7 @@ static irqreturn_t ip32_rtc_int(int irq, void *dev_id) "%s: RTC IRQ without RTC_IRQF\n", __func__); } /* Wait until interrupt goes away */ - disable_irq(MACEISA_RTC_IRQ); + disable_irq_nosync(MACEISA_RTC_IRQ); init_timer(&debounce_timer); debounce_timer.function = debounce; debounce_timer.expires = jiffies + 50; -- cgit v1.2.3 From 7e9e05cad94217498e4d9bd6ef7137b4e9e7ed64 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sat, 16 May 2009 12:23:45 +0100 Subject: MIPS: IP22: Fix hang in power button interrupt handler The hang was caused by the use of disable_irq() from the interrupt handler itself. Fixed by the use of disable_irq_nosync(). The issue was triggered by: commit 3aa551c9b4c40018f0e261a178e3d25478dc04a9 Author: Thomas Gleixner Date: Mon Mar 23 18:28:15 2009 +0100 genirq: add threaded interrupt handler support Signed-off-by: Ralf Baechle --- arch/mips/sgi-ip22/ip22-reset.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/sgi-ip22/ip22-reset.c b/arch/mips/sgi-ip22/ip22-reset.c index 4ad5c3393fd..45b6694c207 100644 --- a/arch/mips/sgi-ip22/ip22-reset.c +++ b/arch/mips/sgi-ip22/ip22-reset.c @@ -148,7 +148,7 @@ static irqreturn_t panel_int(int irq, void *dev_id) if (sgint->istat1 & SGINT_ISTAT1_PWR) { /* Wait until interrupt goes away */ - disable_irq(SGI_PANEL_IRQ); + disable_irq_nosync(SGI_PANEL_IRQ); init_timer(&debounce_timer); debounce_timer.function = debounce; debounce_timer.expires = jiffies + 5; -- cgit v1.2.3 From 195d1a96ae5fdfbedb8dc4b97afee578921fa99e Mon Sep 17 00:00:00 2001 From: peter fuerst Date: Sun, 17 May 2009 23:49:45 +0200 Subject: MIPS: IP28: Change to build with -mr10k-cache-barrier=store Richard Sandiford's new code for inserting the cache-barriers, for GCC 4.3 and above and already incorporated in the current GCC-release, uses a slightly different option-syntax. Signed-off-by: peter fuerst Signed-off-by: Ralf Baechle --- arch/mips/Makefile | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 26947ab8526..c4cae9e6b80 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -473,12 +473,12 @@ endif # Simplified: what IP22 does at 128MB+ in ksegN, IP28 does at 512MB+ in xkphys # ifdef CONFIG_SGI_IP28 - ifeq ($(call cc-option-yn,-mr10k-cache-barrier=1), n) - $(error gcc doesn't support needed option -mr10k-cache-barrier=1) + ifeq ($(call cc-option-yn,-mr10k-cache-barrier=store), n) + $(error gcc doesn't support needed option -mr10k-cache-barrier=store) endif endif core-$(CONFIG_SGI_IP28) += arch/mips/sgi-ip22/ -cflags-$(CONFIG_SGI_IP28) += -mr10k-cache-barrier=1 -I$(srctree)/arch/mips/include/asm/mach-ip28 +cflags-$(CONFIG_SGI_IP28) += -mr10k-cache-barrier=store -I$(srctree)/arch/mips/include/asm/mach-ip28 load-$(CONFIG_SGI_IP28) += 0xa800000020004000 # -- cgit v1.2.3 From a5e696e5d0f1377ff6beb10d2f40edb6a3d1de18 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Wed, 20 May 2009 16:12:32 +1000 Subject: MIPS: 64-bit: Fix system lockup. The address range size calculation inside local_flush_tlb_kernel_range() is being truncated by a too small size variable holder on 64-bit systems. The truncated size can result in an erroneous tlbsize check that means we sit spinning inside a loop trying to flush a hige number of TLB entries. This is for all intents and purposes a system hang. Fix by using an appropriately sized valiable to hold the size. [Ralf: Greg's original patch submission identified the issue and fixed one instance in tlb-r4k.c but there there were several more. For consistency I also modified tlb-r3k.c even though that file is only used on 32-bit.] Signed-off-by: Greg Ungerer Signed-off-by: Ralf Baechle --- arch/mips/mm/tlb-r3k.c | 6 ++---- arch/mips/mm/tlb-r4k.c | 6 ++---- arch/mips/mm/tlb-r8k.c | 3 +-- 3 files changed, 5 insertions(+), 10 deletions(-) diff --git a/arch/mips/mm/tlb-r3k.c b/arch/mips/mm/tlb-r3k.c index f0cf46adb97..1c0048a6f5c 100644 --- a/arch/mips/mm/tlb-r3k.c +++ b/arch/mips/mm/tlb-r3k.c @@ -82,8 +82,7 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start, int cpu = smp_processor_id(); if (cpu_context(cpu, mm) != 0) { - unsigned long flags; - int size; + unsigned long size, flags; #ifdef DEBUG_TLB printk("[tlbrange<%lu,0x%08lx,0x%08lx>]", @@ -121,8 +120,7 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start, void local_flush_tlb_kernel_range(unsigned long start, unsigned long end) { - unsigned long flags; - int size; + unsigned long size, flags; #ifdef DEBUG_TLB printk("[tlbrange<%lu,0x%08lx,0x%08lx>]", start, end); diff --git a/arch/mips/mm/tlb-r4k.c b/arch/mips/mm/tlb-r4k.c index 9619f66e531..892be426787 100644 --- a/arch/mips/mm/tlb-r4k.c +++ b/arch/mips/mm/tlb-r4k.c @@ -117,8 +117,7 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start, int cpu = smp_processor_id(); if (cpu_context(cpu, mm) != 0) { - unsigned long flags; - int size; + unsigned long size, flags; ENTER_CRITICAL(flags); size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT; @@ -160,8 +159,7 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start, void local_flush_tlb_kernel_range(unsigned long start, unsigned long end) { - unsigned long flags; - int size; + unsigned long size, flags; ENTER_CRITICAL(flags); size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT; diff --git a/arch/mips/mm/tlb-r8k.c b/arch/mips/mm/tlb-r8k.c index 4f01a3be215..4ec95cc2df2 100644 --- a/arch/mips/mm/tlb-r8k.c +++ b/arch/mips/mm/tlb-r8k.c @@ -111,8 +111,7 @@ out_restore: /* Usable for KV1 addresses only! */ void local_flush_tlb_kernel_range(unsigned long start, unsigned long end) { - unsigned long flags; - int size; + unsigned long size, flags; size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT; size = (size + 1) >> 1; -- cgit v1.2.3 From 9b6fe313bfce27d4a261257da70196be0ac2bef5 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Michel=20D=C3=A4nzer?= Date: Wed, 20 May 2009 13:32:00 +0200 Subject: drm: Copy back ioctl data to userspace regardless of return code. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fixes a regression from commit 9d5b3ffc42f7820e8ee07705496955e4c2c38dd9 ('drm: fixup some of the ioctl function exit paths'): The vblank ioctl needs to update the userspace parameters when interrupted by a signal, which was prevented by the return code check. This could cause the X server to hang in drmWaitVBlank(). Signed-off-by: Michel Dänzer Signed-off-by: Jesse Barnes --- drivers/gpu/drm/drm_drv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/drm_drv.c b/drivers/gpu/drm/drm_drv.c index f01def16a66..019b7c57823 100644 --- a/drivers/gpu/drm/drm_drv.c +++ b/drivers/gpu/drm/drm_drv.c @@ -481,7 +481,7 @@ int drm_ioctl(struct inode *inode, struct file *filp, } retcode = func(dev, kdata, file_priv); - if ((retcode == 0) && (cmd & IOC_OUT)) { + if (cmd & IOC_OUT) { if (copy_to_user((void __user *)arg, kdata, _IOC_SIZE(cmd)) != 0) retcode = -EFAULT; -- cgit v1.2.3 From 03fbdb15c14e9746c63168e3ff2c64b9c8336d33 Mon Sep 17 00:00:00 2001 From: Alessandro Rubini Date: Wed, 20 May 2009 22:39:08 +0100 Subject: [ARM] 5519/1: amba probe: pass "struct amba_id *" instead of void * The second argument of the probe method points to the amba_id structure, so it's better passed with the correct type. None of the current in-tree drivers uses the pointer, so they have only been checked for a clean compile. Change suggested by Russell King. Signed-off-by: Alessandro Rubini Signed-off-by: Russell King --- drivers/input/serio/ambakmi.c | 2 +- drivers/mmc/host/mmci.c | 2 +- drivers/rtc/rtc-pl030.c | 2 +- drivers/rtc/rtc-pl031.c | 2 +- drivers/serial/amba-pl010.c | 2 +- drivers/serial/amba-pl011.c | 2 +- drivers/video/amba-clcd.c | 2 +- include/linux/amba/bus.h | 2 +- sound/arm/aaci.c | 2 +- 9 files changed, 9 insertions(+), 9 deletions(-) diff --git a/drivers/input/serio/ambakmi.c b/drivers/input/serio/ambakmi.c index e29cdc13a19..a28c06d686e 100644 --- a/drivers/input/serio/ambakmi.c +++ b/drivers/input/serio/ambakmi.c @@ -107,7 +107,7 @@ static void amba_kmi_close(struct serio *io) clk_disable(kmi->clk); } -static int amba_kmi_probe(struct amba_device *dev, void *id) +static int amba_kmi_probe(struct amba_device *dev, struct amba_id *id) { struct amba_kmi_port *kmi; struct serio *io; diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 36875dcfa49..7d4febdab28 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -490,7 +490,7 @@ static void mmci_check_status(unsigned long data) mod_timer(&host->timer, jiffies + HZ); } -static int __devinit mmci_probe(struct amba_device *dev, void *id) +static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id) { struct mmc_platform_data *plat = dev->dev.platform_data; struct mmci_host *host; diff --git a/drivers/rtc/rtc-pl030.c b/drivers/rtc/rtc-pl030.c index 82615355215..aaf1f75fa29 100644 --- a/drivers/rtc/rtc-pl030.c +++ b/drivers/rtc/rtc-pl030.c @@ -102,7 +102,7 @@ static const struct rtc_class_ops pl030_ops = { .set_alarm = pl030_set_alarm, }; -static int pl030_probe(struct amba_device *dev, void *id) +static int pl030_probe(struct amba_device *dev, struct amba_id *id) { struct pl030_rtc *rtc; int ret; diff --git a/drivers/rtc/rtc-pl031.c b/drivers/rtc/rtc-pl031.c index 333eec689d2..451fc13784d 100644 --- a/drivers/rtc/rtc-pl031.c +++ b/drivers/rtc/rtc-pl031.c @@ -127,7 +127,7 @@ static int pl031_remove(struct amba_device *adev) return 0; } -static int pl031_probe(struct amba_device *adev, void *id) +static int pl031_probe(struct amba_device *adev, struct amba_id *id) { int ret; struct pl031_local *ldata; diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c index e3a5ad5ef1d..cdc049d4350 100644 --- a/drivers/serial/amba-pl010.c +++ b/drivers/serial/amba-pl010.c @@ -665,7 +665,7 @@ static struct uart_driver amba_reg = { .cons = AMBA_CONSOLE, }; -static int pl010_probe(struct amba_device *dev, void *id) +static int pl010_probe(struct amba_device *dev, struct amba_id *id) { struct uart_amba_port *uap; void __iomem *base; diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c index 8b2b9700f3e..88fdac51b6c 100644 --- a/drivers/serial/amba-pl011.c +++ b/drivers/serial/amba-pl011.c @@ -729,7 +729,7 @@ static struct uart_driver amba_reg = { .cons = AMBA_CONSOLE, }; -static int pl011_probe(struct amba_device *dev, void *id) +static int pl011_probe(struct amba_device *dev, struct amba_id *id) { struct uart_amba_port *uap; void __iomem *base; diff --git a/drivers/video/amba-clcd.c b/drivers/video/amba-clcd.c index 61050ab1412..d1f80bac54f 100644 --- a/drivers/video/amba-clcd.c +++ b/drivers/video/amba-clcd.c @@ -437,7 +437,7 @@ static int clcdfb_register(struct clcd_fb *fb) return ret; } -static int clcdfb_probe(struct amba_device *dev, void *id) +static int clcdfb_probe(struct amba_device *dev, struct amba_id *id) { struct clcd_board *board = dev->dev.platform_data; struct clcd_fb *fb; diff --git a/include/linux/amba/bus.h b/include/linux/amba/bus.h index 51e6e54b2aa..9b93cafa82a 100644 --- a/include/linux/amba/bus.h +++ b/include/linux/amba/bus.h @@ -28,7 +28,7 @@ struct amba_id { struct amba_driver { struct device_driver drv; - int (*probe)(struct amba_device *, void *); + int (*probe)(struct amba_device *, struct amba_id *); int (*remove)(struct amba_device *); void (*shutdown)(struct amba_device *); int (*suspend)(struct amba_device *, pm_message_t); diff --git a/sound/arm/aaci.c b/sound/arm/aaci.c index 7fbd68fab94..5c48e36038f 100644 --- a/sound/arm/aaci.c +++ b/sound/arm/aaci.c @@ -1074,7 +1074,7 @@ static unsigned int __devinit aaci_size_fifo(struct aaci *aaci) return i; } -static int __devinit aaci_probe(struct amba_device *dev, void *id) +static int __devinit aaci_probe(struct amba_device *dev, struct amba_id *id) { struct aaci *aaci; int ret, i; -- cgit v1.2.3 From 98f32602d42951e61a059685f842aa7d778ffab0 Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Thu, 21 May 2009 20:33:58 +0100 Subject: hugh: update email address My old address will shut down in a few days time: remove it from the tree, and add a tmpfs (shmem filesystem) maintainer entry with the new address. Signed-off-by: Hugh Dickins Signed-off-by: Hugh Dickins Signed-off-by: Linus Torvalds --- Documentation/filesystems/tmpfs.txt | 2 +- MAINTAINERS | 8 ++++++++ mm/rmap.c | 2 +- 3 files changed, 10 insertions(+), 2 deletions(-) diff --git a/Documentation/filesystems/tmpfs.txt b/Documentation/filesystems/tmpfs.txt index 222437efd75..3015da0c6b2 100644 --- a/Documentation/filesystems/tmpfs.txt +++ b/Documentation/filesystems/tmpfs.txt @@ -133,4 +133,4 @@ RAM/SWAP in 10240 inodes and it is only accessible by root. Author: Christoph Rohland , 1.12.01 Updated: - Hugh Dickins , 4 June 2007 + Hugh Dickins, 4 June 2007 diff --git a/MAINTAINERS b/MAINTAINERS index 2b349ba4add..64ea80e45e3 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5579,6 +5579,14 @@ M: ian@mnementh.co.uk S: Maintained F: drivers/mmc/host/tmio_mmc.* +TMPFS (SHMEM FILESYSTEM) +P: Hugh Dickins +M: hugh.dickins@tiscali.co.uk +L: linux-mm@kvack.org +S: Maintained +F: include/linux/shmem_fs.h +F: mm/shmem.c + TPM DEVICE DRIVER P: Debora Velarde M: debora@linux.vnet.ibm.com diff --git a/mm/rmap.c b/mm/rmap.c index 16521664010..23122af3261 100644 --- a/mm/rmap.c +++ b/mm/rmap.c @@ -14,7 +14,7 @@ * Original design by Rik van Riel 2001 * File methods by Dave McCracken 2003, 2004 * Anonymous methods by Andrea Arcangeli 2004 - * Contributions by Hugh Dickins 2003, 2004 + * Contributions by Hugh Dickins 2003, 2004 */ /* -- cgit v1.2.3 From 703a3b8e5c01cf6fb33c6d8dc99905f889a4e992 Mon Sep 17 00:00:00 2001 From: Steve French Date: Thu, 21 May 2009 22:21:53 +0000 Subject: [CIFS] fix posix open regression Posix open code was not properly adding the file to the list of open files. Fix allocating cifsFileInfo more than once, and adding twice to flist and tlist. Also fix mode setting to be done in one place in these paths. Signed-off-by: Steve French Reviewed-by: Shirish Pargaonkar Tested-by: Jeff Layton Tested-by: Luca Tettamanti --- fs/cifs/dir.c | 14 ++++++------- fs/cifs/file.c | 66 ++++++++++++++++++++++++++++++++-------------------------- 2 files changed, 44 insertions(+), 36 deletions(-) diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c index 11431ed72a7..f49d684edd9 100644 --- a/fs/cifs/dir.c +++ b/fs/cifs/dir.c @@ -225,6 +225,7 @@ int cifs_posix_open(char *full_path, struct inode **pinode, if (!(oflags & FMODE_READ)) write_only = true; + mode &= ~current_umask(); rc = CIFSPOSIXCreate(xid, cifs_sb->tcon, posix_flags, mode, pnetfid, presp_data, &oplock, full_path, cifs_sb->local_nls, cifs_sb->mnt_cifs_flags & @@ -310,7 +311,6 @@ cifs_create(struct inode *inode, struct dentry *direntry, int mode, return -ENOMEM; } - mode &= ~current_umask(); if (oplockEnabled) oplock = REQ_OPLOCK; @@ -336,7 +336,7 @@ cifs_create(struct inode *inode, struct dentry *direntry, int mode, else /* success, no need to query */ goto cifs_create_set_dentry; } else if ((rc != -EIO) && (rc != -EREMOTE) && - (rc != -EOPNOTSUPP)) /* path not found or net err */ + (rc != -EOPNOTSUPP) && (rc != -EINVAL)) goto cifs_create_out; /* else fallthrough to retry, using older open call, this is case where server does not support this SMB level, and @@ -609,7 +609,6 @@ cifs_lookup(struct inode *parent_dir_inode, struct dentry *direntry, int xid; int rc = 0; /* to get around spurious gcc warning, set to zero here */ int oplock = 0; - int mode; __u16 fileHandle = 0; bool posix_open = false; struct cifs_sb_info *cifs_sb; @@ -660,13 +659,12 @@ cifs_lookup(struct inode *parent_dir_inode, struct dentry *direntry, if (pTcon->unix_ext) { if (!(nd->flags & (LOOKUP_PARENT | LOOKUP_DIRECTORY)) && - (nd->flags & LOOKUP_OPEN)) { + (nd->flags & LOOKUP_OPEN) && !pTcon->broken_posix_open) { if (!((nd->intent.open.flags & O_CREAT) && (nd->intent.open.flags & O_EXCL))) { - mode = nd->intent.open.create_mode & - ~current_umask(); rc = cifs_posix_open(full_path, &newInode, - parent_dir_inode->i_sb, mode, + parent_dir_inode->i_sb, + nd->intent.open.create_mode, nd->intent.open.flags, &oplock, &fileHandle, xid); /* @@ -681,6 +679,8 @@ cifs_lookup(struct inode *parent_dir_inode, struct dentry *direntry, */ if ((rc != -EINVAL) && (rc != -EOPNOTSUPP)) posix_open = true; + else + pTcon->broken_posix_open = true; } } if (!posix_open) diff --git a/fs/cifs/file.c b/fs/cifs/file.c index 38c06f82657..302ea15f02e 100644 --- a/fs/cifs/file.c +++ b/fs/cifs/file.c @@ -130,10 +130,6 @@ static inline int cifs_posix_open_inode_helper(struct inode *inode, struct cifsFileInfo *pCifsFile, int oplock, u16 netfid) { - file->private_data = kmalloc(sizeof(struct cifsFileInfo), GFP_KERNEL); - if (file->private_data == NULL) - return -ENOMEM; - pCifsFile = cifs_init_private(file->private_data, inode, file, netfid); write_lock(&GlobalSMBSeslock); pCifsInode = CIFS_I(file->f_path.dentry->d_inode); @@ -184,6 +180,38 @@ psx_client_can_cache: return 0; } +static struct cifsFileInfo * +cifs_fill_filedata(struct file *file) +{ + struct list_head *tmp; + struct cifsFileInfo *pCifsFile = NULL; + struct cifsInodeInfo *pCifsInode = NULL; + + /* search inode for this file and fill in file->private_data */ + pCifsInode = CIFS_I(file->f_path.dentry->d_inode); + read_lock(&GlobalSMBSeslock); + list_for_each(tmp, &pCifsInode->openFileList) { + pCifsFile = list_entry(tmp, struct cifsFileInfo, flist); + if ((pCifsFile->pfile == NULL) && + (pCifsFile->pid == current->tgid)) { + /* mode set in cifs_create */ + + /* needed for writepage */ + pCifsFile->pfile = file; + file->private_data = pCifsFile; + break; + } + } + read_unlock(&GlobalSMBSeslock); + + if (file->private_data != NULL) { + return pCifsFile; + } else if ((file->f_flags & O_CREAT) && (file->f_flags & O_EXCL)) + cERROR(1, ("could not find file instance for " + "new file %p", file)); + return NULL; +} + /* all arguments to this function must be checked for validity in caller */ static inline int cifs_open_inode_helper(struct inode *inode, struct file *file, struct cifsInodeInfo *pCifsInode, struct cifsFileInfo *pCifsFile, @@ -258,7 +286,6 @@ int cifs_open(struct inode *inode, struct file *file) struct cifsTconInfo *tcon; struct cifsFileInfo *pCifsFile; struct cifsInodeInfo *pCifsInode; - struct list_head *tmp; char *full_path = NULL; int desiredAccess; int disposition; @@ -270,32 +297,12 @@ int cifs_open(struct inode *inode, struct file *file) cifs_sb = CIFS_SB(inode->i_sb); tcon = cifs_sb->tcon; - /* search inode for this file and fill in file->private_data */ pCifsInode = CIFS_I(file->f_path.dentry->d_inode); - read_lock(&GlobalSMBSeslock); - list_for_each(tmp, &pCifsInode->openFileList) { - pCifsFile = list_entry(tmp, struct cifsFileInfo, - flist); - if ((pCifsFile->pfile == NULL) && - (pCifsFile->pid == current->tgid)) { - /* mode set in cifs_create */ - - /* needed for writepage */ - pCifsFile->pfile = file; - - file->private_data = pCifsFile; - break; - } - } - read_unlock(&GlobalSMBSeslock); - - if (file->private_data != NULL) { - rc = 0; + pCifsFile = cifs_fill_filedata(file); + if (pCifsFile) { FreeXid(xid); - return rc; - } else if ((file->f_flags & O_CREAT) && (file->f_flags & O_EXCL)) - cERROR(1, ("could not find file instance for " - "new file %p", file)); + return 0; + } full_path = build_path_from_dentry(file->f_path.dentry); if (full_path == NULL) { @@ -325,6 +332,7 @@ int cifs_open(struct inode *inode, struct file *file) /* no need for special case handling of setting mode on read only files needed here */ + pCifsFile = cifs_fill_filedata(file); cifs_posix_open_inode_helper(inode, file, pCifsInode, pCifsFile, oplock, netfid); goto out; -- cgit v1.2.3 From 37869fa2da1a952ed736858f8b9e45c0b9131ae9 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 20 May 2009 14:30:06 +0000 Subject: sh: ap325 camera without i2c driver fix This patch fixes the ap325rxa ncm03j camera code to handle the case where no i2c driver is present. Without this fix i2c_transfer() may be passed NULL as adapter which results in a crash. Triggered when i2c-sh_mobile.c failed to probe() due to missing MSTP clocks. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/boards/board-ap325rxa.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/sh/boards/board-ap325rxa.c b/arch/sh/boards/board-ap325rxa.c index 39e46919df1..f2a29641b6a 100644 --- a/arch/sh/boards/board-ap325rxa.c +++ b/arch/sh/boards/board-ap325rxa.c @@ -263,6 +263,9 @@ static int camera_probe(void) struct i2c_msg msg; int ret; + if (!a) + return -ENODEV; + camera_power(1); msg.addr = 0x6e; msg.buf = camera_ncm03j_magic; -- cgit v1.2.3 From 8e9bb19ef97d6594e735bee64b6d72103e350854 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 20 May 2009 14:34:43 +0000 Subject: video: stop sh_mobile_lcdcfb only if started This patch fixes the LCDC driver to avoid calling the function sh_mobile_lcdc_start_stop(priv, 0) unless the same function has been called before to start the LCDC hardware. Triggered when sh_mobile_lcdcfb.c failed to probe() due to missing MSTP clocks. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- drivers/video/sh_mobile_lcdcfb.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c index 92ea0ab44ce..f10d2fbeda0 100644 --- a/drivers/video/sh_mobile_lcdcfb.c +++ b/drivers/video/sh_mobile_lcdcfb.c @@ -47,6 +47,7 @@ struct sh_mobile_lcdc_priv { #endif unsigned long lddckr; struct sh_mobile_lcdc_chan ch[2]; + int started; }; /* shared registers */ @@ -451,6 +452,7 @@ static int sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv) /* start the lcdc */ sh_mobile_lcdc_start_stop(priv, 1); + priv->started = 1; /* tell the board code to enable the panel */ for (k = 0; k < ARRAY_SIZE(priv->ch); k++) { @@ -493,7 +495,10 @@ static void sh_mobile_lcdc_stop(struct sh_mobile_lcdc_priv *priv) } /* stop the lcdc */ - sh_mobile_lcdc_start_stop(priv, 0); + if (priv->started) { + sh_mobile_lcdc_start_stop(priv, 0); + priv->started = 0; + } /* stop clocks */ for (k = 0; k < ARRAY_SIZE(priv->ch); k++) -- cgit v1.2.3 From 6eb0ac03899a1363ba176abe0830a9e6698c0503 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Thu, 21 May 2009 19:10:23 +0000 Subject: powerpc/maple: Add a quirk to disable MSI for IPR on Bimini Something in the HW or FW setup is busted and MSIs aren't working with IPR on Bimini, so until we figure out exaxtly what's up, we quirk them out Signed-off-by: Michael Ellerman Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/maple/pci.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/arch/powerpc/platforms/maple/pci.c b/arch/powerpc/platforms/maple/pci.c index 301855263b8..04296ffff8b 100644 --- a/arch/powerpc/platforms/maple/pci.c +++ b/arch/powerpc/platforms/maple/pci.c @@ -592,3 +592,17 @@ int maple_pci_get_legacy_ide_irq(struct pci_dev *pdev, int channel) } return irq; } + +static void __devinit quirk_ipr_msi(struct pci_dev *dev) +{ + /* Something prevents MSIs from the IPR from working on Bimini, + * and the driver has no smarts to recover. So disable MSI + * on it for now. */ + + if (machine_is(maple)) { + dev->no_msi = 1; + dev_info(&dev->dev, "Quirk disabled MSI\n"); + } +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN, + quirk_ipr_msi); -- cgit v1.2.3 From 87488957a68293357a94c8142de7d0ae17914912 Mon Sep 17 00:00:00 2001 From: Adam Williamson Date: Thu, 21 May 2009 18:32:59 -0400 Subject: ALSA: hda - fix audio on HP TX25xx series notebooks Fixes https://bugtrack.alsa-project.org/alsa-bug/view.php?id=4121 Taken from https://bugzilla.redhat.com/show_bug.cgi?id=498060 Signed-off-by: Adam Williamson Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index b8a0d3e7927..bcbb736f94f 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -12058,6 +12058,7 @@ static struct snd_pci_quirk alc268_cfg_tbl[] = { SND_PCI_QUIRK(0x1028, 0x0253, "Dell OEM", ALC268_DELL), SND_PCI_QUIRK(0x1028, 0x02b0, "Dell Inspiron Mini9", ALC268_DELL), SND_PCI_QUIRK(0x103c, 0x30cc, "TOSHIBA", ALC268_TOSHIBA), + SND_PCI_QUIRK(0x103c, 0x30f1, "HP TX25xx series", ALC268_TOSHIBA), SND_PCI_QUIRK(0x1043, 0x1205, "ASUS W7J", ALC268_3ST), SND_PCI_QUIRK(0x1179, 0xff10, "TOSHIBA A205", ALC268_TOSHIBA), SND_PCI_QUIRK(0x1179, 0xff50, "TOSHIBA A305", ALC268_TOSHIBA), -- cgit v1.2.3 From d5046853634a8d73f28bad3cf68d182c4a99035d Mon Sep 17 00:00:00 2001 From: Ryusuke Konishi Date: Fri, 22 May 2009 20:36:21 +0900 Subject: nilfs2: fix memory leak in nilfs_ioctl_clean_segments This fixes a new memory leak problem in garbage collection. The problem was brought by the bugfix patch ("nilfs2: fix lock order reversal in nilfs_clean_segments ioctl"). Thanks to Kentaro Suzuki for finding this problem. Reported-by: Kentaro Suzuki Signed-off-by: Ryusuke Konishi --- fs/nilfs2/ioctl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/nilfs2/ioctl.c b/fs/nilfs2/ioctl.c index 50ff3f2cdf2..d6759b92006 100644 --- a/fs/nilfs2/ioctl.c +++ b/fs/nilfs2/ioctl.c @@ -576,7 +576,7 @@ static int nilfs_ioctl_clean_segments(struct inode *inode, struct file *filp, ret = nilfs_clean_segments(inode->i_sb, argv, kbufs); out_free: - while (--n > 0) + while (--n >= 0) vfree(kbufs[n]); kfree(kbufs[4]); return ret; -- cgit v1.2.3 From 63d3892379f93b73ef905fb3449f4e4438a53b40 Mon Sep 17 00:00:00 2001 From: Wu Zhangjin Date: Thu, 21 May 2009 05:50:01 +0800 Subject: MIPS: Fix sparse warning in incompatiable argument type of clear_user. The type of the second argument of access_ok should be (void __user *). The unnecessary conversion of the clear_user address argument was causing sparse to emit warnings on the __chk_user_ptr check. Signed-off-by: Wu Zhangjin Signed-off-by: Ralf Baechle --- arch/mips/include/asm/uaccess.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/include/asm/uaccess.h b/arch/mips/include/asm/uaccess.h index 8de858f5449..c2d53c18fd3 100644 --- a/arch/mips/include/asm/uaccess.h +++ b/arch/mips/include/asm/uaccess.h @@ -956,7 +956,7 @@ __clear_user(void __user *addr, __kernel_size_t size) void __user * __cl_addr = (addr); \ unsigned long __cl_size = (n); \ if (__cl_size && access_ok(VERIFY_WRITE, \ - ((unsigned long)(__cl_addr)), __cl_size)) \ + __cl_addr, __cl_size)) \ __cl_size = __clear_user(__cl_addr, __cl_size); \ __cl_size; \ }) -- cgit v1.2.3 From 63c901c7e6fb878805cd2f8f14fa3eee8c03ee84 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Fri, 22 May 2009 10:48:17 +0100 Subject: MIPS: IP32: Fix build error due to uninitialized variable. CC arch/mips/sgi-ip32/ip32-reset.o cc1: warnings being treated as errors arch/mips/sgi-ip32/ip32-reset.c: In function 'debounce': arch/mips/sgi-ip32/ip32-reset.c:97: error: 'reg_a' is used uninitialized in this function The issues is old but due to the volatile keyword gcc older than 4.4 did not warn about this obvious bug. Signed-off-by: Ralf Baechle --- arch/mips/sgi-ip32/ip32-reset.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/mips/sgi-ip32/ip32-reset.c b/arch/mips/sgi-ip32/ip32-reset.c index 667da932b7b..cc549a9a99e 100644 --- a/arch/mips/sgi-ip32/ip32-reset.c +++ b/arch/mips/sgi-ip32/ip32-reset.c @@ -94,6 +94,7 @@ static void debounce(unsigned long data) volatile unsigned char reg_a, reg_c, xctrl_a; reg_c = CMOS_READ(RTC_INTR_FLAGS); + reg_a = CMOS_READ(RTC_REG_A); CMOS_WRITE(reg_a | DS_REGA_DV0, RTC_REG_A); wbflush(); xctrl_a = CMOS_READ(DS_B1_XCTRL4A); -- cgit v1.2.3 From d2f82c2f70d56ba4623de25edb383fec01f43b89 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Fri, 22 May 2009 10:58:43 +0100 Subject: MIPS: IP32: Remove unnecessary if not even harmful volatile keywords. They are unneeded and as the issue fixed in lmo commit 63f7ec59053e3f850ab67a9938e631bcba64c6ce shows even harmful. Signed-off-by: Ralf Baechle --- arch/mips/sgi-ip32/ip32-reset.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/mips/sgi-ip32/ip32-reset.c b/arch/mips/sgi-ip32/ip32-reset.c index cc549a9a99e..9b95d80ebc6 100644 --- a/arch/mips/sgi-ip32/ip32-reset.c +++ b/arch/mips/sgi-ip32/ip32-reset.c @@ -53,7 +53,7 @@ static inline void ip32_machine_halt(void) static void ip32_machine_power_off(void) { - volatile unsigned char reg_a, xctrl_a, xctrl_b; + unsigned char reg_a, xctrl_a, xctrl_b; disable_irq(MACEISA_RTC_IRQ); reg_a = CMOS_READ(RTC_REG_A); @@ -91,7 +91,7 @@ static void blink_timeout(unsigned long data) static void debounce(unsigned long data) { - volatile unsigned char reg_a, reg_c, xctrl_a; + unsigned char reg_a, reg_c, xctrl_a; reg_c = CMOS_READ(RTC_INTR_FLAGS); reg_a = CMOS_READ(RTC_REG_A); @@ -138,7 +138,7 @@ static inline void ip32_power_button(void) static irqreturn_t ip32_rtc_int(int irq, void *dev_id) { - volatile unsigned char reg_c; + unsigned char reg_c; reg_c = CMOS_READ(RTC_INTR_FLAGS); if (!(reg_c & RTC_IRQF)) { -- cgit v1.2.3 From 8369d5fa63260cc54464b4687aa6a0f78402d98e Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 22 May 2009 16:23:36 +0200 Subject: ide: fix 40-wire cable detection for TSST SH-S202* ATAPI devices (v2) Since 2.6.26 we support UDMA66 on ATAPI devices requiring IVB quirk: commit 8588a2b732928b343233af9b1855705b8286bed4 ("ide: add SH-S202J to ivb_list[]") We also later added support for more such devices in: commit e97564f362a93f8c248246c19828895950341252 ("ide: More TSST drives with broken cable detection") and in: commit 3ced5c49bd2d1f2c7f769e3a54385883de63a652 ("ide: add TSSTcorp CDDVDW SH-S202H to ivb_list[]") It turns out that such devices lack cable detection altogether (which in turn results in incorrect detection of 40-wire cables by our current cable detection strategy) so always handle them by trusting host-side cable detection only. v2: Model detection fixup from Martin. Reported-and-tested-by: Martin Lottermoser Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-iops.c | 21 +++++++++++++++++---- 1 file changed, 17 insertions(+), 4 deletions(-) diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index c19a221b1e1..06fe002116e 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -206,8 +206,6 @@ EXPORT_SYMBOL_GPL(ide_in_drive_list); /* * Early UDMA66 devices don't set bit14 to 1, only bit13 is valid. - * We list them here and depend on the device side cable detection for them. - * * Some optical devices with the buggy firmwares have the same problem. */ static const struct drive_list_entry ivb_list[] = { @@ -251,10 +249,25 @@ u8 eighty_ninty_three(ide_drive_t *drive) * - force bit13 (80c cable present) check also for !ivb devices * (unless the slave device is pre-ATA3) */ - if ((id[ATA_ID_HW_CONFIG] & 0x4000) || - (ivb && (id[ATA_ID_HW_CONFIG] & 0x2000))) + if (id[ATA_ID_HW_CONFIG] & 0x4000) return 1; + if (ivb) { + const char *model = (char *)&id[ATA_ID_PROD]; + + if (strstr(model, "TSSTcorp CDDVDW SH-S202")) { + /* + * These ATAPI devices always report 80c cable + * so we have to depend on the host in this case. + */ + if (hwif->cbl == ATA_CBL_PATA80) + return 1; + } else { + /* Depend on the device side cable detection. */ + if (id[ATA_ID_HW_CONFIG] & 0x2000) + return 1; + } + } no_80w: if (drive->dev_flags & IDE_DFLAG_UDMA33_WARNED) return 0; -- cgit v1.2.3 From e3b29f05124b07303088795396ff858811d2acb8 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 22 May 2009 16:23:37 +0200 Subject: ide: fix OOPS during ide-cd error recovery On Tuesday 19 May 2009 20:29:28 Martin Lottermoser wrote: > hdc: cdrom_decode_status: error=0x40 <3>{ LastFailedSense=0x04 } > ide: failed opcode was: unknown > hdc: DMA disabled > ------------[ cut here ]------------ > kernel BUG at drivers/ide/ide-io.c:872! It is possible for ide-cd to ignore ide_error()'s return value under some circumstances. Workaround it in ide_intr() and ide_timer_expiry() by checking if there is a device/port reset pending currently. Fixes bug #13345: http://bugzilla.kernel.org/show_bug.cgi?id=13345 Reported-by: Martin Lottermoser Reported-and-tested-by: Modestas Vainius Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-io.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 35dc38d3b2c..6415a2e2ba8 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -696,7 +696,7 @@ void ide_timer_expiry (unsigned long data) } spin_lock_irq(&hwif->lock); enable_irq(hwif->irq); - if (startstop == ide_stopped) { + if (startstop == ide_stopped && hwif->polling == 0) { ide_unlock_port(hwif); plug_device = 1; } @@ -868,7 +868,7 @@ irqreturn_t ide_intr (int irq, void *dev_id) * same irq as is currently being serviced here, and Linux * won't allow another of the same (on any CPU) until we return. */ - if (startstop == ide_stopped) { + if (startstop == ide_stopped && hwif->polling == 0) { BUG_ON(hwif->handler); ide_unlock_port(hwif); plug_device = 1; -- cgit v1.2.3 From 26bfcf21e25fa090f099fa0ccf201424989cbd7b Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 22 May 2009 16:23:37 +0200 Subject: ide: fix printk() levels in ide_dump_ata[pi]_error() Fixes "<3>" in error messages like this one: hdc: cdrom_decode_status: error=0x40 <3>{ LastFailedSense=0x04 } Reported-by: Martin Lottermoser Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-lib.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c index 56ff8c46c7d..85b9bae111f 100644 --- a/drivers/ide/ide-lib.c +++ b/drivers/ide/ide-lib.c @@ -91,7 +91,7 @@ static void ide_dump_sector(ide_drive_t *drive) static void ide_dump_ata_error(ide_drive_t *drive, u8 err) { - printk(KERN_ERR "{ "); + printk(KERN_CONT "{ "); if (err & ATA_ABORTED) printk(KERN_CONT "DriveStatusError "); if (err & ATA_ICRC) @@ -121,7 +121,7 @@ static void ide_dump_ata_error(ide_drive_t *drive, u8 err) static void ide_dump_atapi_error(ide_drive_t *drive, u8 err) { - printk(KERN_ERR "{ "); + printk(KERN_CONT "{ "); if (err & ATAPI_ILI) printk(KERN_CONT "IllegalLengthIndication "); if (err & ATAPI_EOM) -- cgit v1.2.3 From cc30137a221372c67a943ad9ea68121a2bd57a6e Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 22 May 2009 16:23:38 +0200 Subject: ide: improve failed opcode reporting Nowadays we (almost) always store the currently executing command in hwif->cmd so we can use it for the failed opcode reporting. Cc: Martin Lottermoser Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-lib.c | 23 ++++------------------- 1 file changed, 4 insertions(+), 19 deletions(-) diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c index 85b9bae111f..2148df836ce 100644 --- a/drivers/ide/ide-lib.c +++ b/drivers/ide/ide-lib.c @@ -31,24 +31,6 @@ void ide_toggle_bounce(ide_drive_t *drive, int on) blk_queue_bounce_limit(drive->queue, addr); } -static void ide_dump_opcode(ide_drive_t *drive) -{ - struct request *rq = drive->hwif->rq; - struct ide_cmd *cmd = NULL; - - if (!rq) - return; - - if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE) - cmd = rq->special; - - printk(KERN_ERR "ide: failed opcode was: "); - if (cmd == NULL) - printk(KERN_CONT "unknown\n"); - else - printk(KERN_CONT "0x%02x\n", cmd->tf.command); -} - u64 ide_get_lba_addr(struct ide_cmd *cmd, int lba48) { struct ide_taskfile *tf = &cmd->tf; @@ -179,7 +161,10 @@ u8 ide_dump_status(ide_drive_t *drive, const char *msg, u8 stat) else ide_dump_atapi_error(drive, err); } - ide_dump_opcode(drive); + + printk(KERN_ERR "%s: possibly failed opcode: 0x%02x\n", + drive->name, drive->hwif->cmd.tf.command); + return err; } EXPORT_SYMBOL(ide_dump_status); -- cgit v1.2.3 From 28ee9bc5cc42776e0364399b401a64906ac1ac8e Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 22 May 2009 16:23:38 +0200 Subject: ide: report timeouts in ide_busy_sleep() * change 'hwif' argument to 'drive' * report an error on timeout Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-probe.c | 9 ++++++--- include/linux/ide.h | 2 +- 2 files changed, 7 insertions(+), 4 deletions(-) diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 7f264ed1141..c895ed52b2e 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -295,7 +295,7 @@ int ide_dev_read_id(ide_drive_t *drive, u8 cmd, u16 *id) timeout = ((cmd == ATA_CMD_ID_ATA) ? WAIT_WORSTCASE : WAIT_PIDENTIFY) / 2; - if (ide_busy_sleep(hwif, timeout, use_altstatus)) + if (ide_busy_sleep(drive, timeout, use_altstatus)) return 1; /* wait for IRQ and ATA_DRQ */ @@ -316,8 +316,9 @@ int ide_dev_read_id(ide_drive_t *drive, u8 cmd, u16 *id) return rc; } -int ide_busy_sleep(ide_hwif_t *hwif, unsigned long timeout, int altstatus) +int ide_busy_sleep(ide_drive_t *drive, unsigned long timeout, int altstatus) { + ide_hwif_t *hwif = drive->hwif; u8 stat; timeout += jiffies; @@ -330,6 +331,8 @@ int ide_busy_sleep(ide_hwif_t *hwif, unsigned long timeout, int altstatus) return 0; } while (time_before(jiffies, timeout)); + printk(KERN_ERR "%s: timeout in %s\n", drive->name, __func__); + return 1; /* drive timed-out */ } @@ -420,7 +423,7 @@ static int do_probe (ide_drive_t *drive, u8 cmd) tp_ops->dev_select(drive); msleep(50); tp_ops->exec_command(hwif, ATA_CMD_DEV_RESET); - (void)ide_busy_sleep(hwif, WAIT_WORSTCASE, 0); + (void)ide_busy_sleep(drive, WAIT_WORSTCASE, 0); rc = ide_dev_read_id(drive, cmd, id); } diff --git a/include/linux/ide.h b/include/linux/ide.h index ff65fffb078..9fed365a598 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -1109,7 +1109,7 @@ void ide_fix_driveid(u16 *); extern void ide_fixstring(u8 *, const int, const int); -int ide_busy_sleep(ide_hwif_t *, unsigned long, int); +int ide_busy_sleep(ide_drive_t *, unsigned long, int); int ide_wait_stat(ide_startstop_t *, ide_drive_t *, u8, u8, unsigned long); -- cgit v1.2.3 From 5993856e53fbc4b4f28e2d481deaebeb715b1267 Mon Sep 17 00:00:00 2001 From: Harald Welte Date: Fri, 22 May 2009 16:23:39 +0200 Subject: via82cxxx: Add VIA VX855 PCI Device ID This patch adds the PCI Device ID 0xc409 to the PCI ID table of via82cxxx.c, as well as the 0x8409 south bridge ID. This is required to make the IDE driver work on the VX855/VX875 integrated chipset. Signed-off-by: Harald Welte Cc: Joseph Chan Cc: Bruce Chang Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/via82cxxx.c | 2 ++ include/linux/pci_ids.h | 2 +- 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/ide/via82cxxx.c b/drivers/ide/via82cxxx.c index 3ff7231e485..028de26a25f 100644 --- a/drivers/ide/via82cxxx.c +++ b/drivers/ide/via82cxxx.c @@ -67,6 +67,7 @@ static struct via_isa_bridge { u8 udma_mask; u8 flags; } via_isa_bridges[] = { + { "vx855", PCI_DEVICE_ID_VIA_VX855, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, { "vx800", PCI_DEVICE_ID_VIA_VX800, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, { "cx700", PCI_DEVICE_ID_VIA_CX700, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, { "vt8237s", PCI_DEVICE_ID_VIA_8237S, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, @@ -474,6 +475,7 @@ static const struct pci_device_id via_pci_tbl[] = { { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C576_1), 0 }, { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C586_1), 0 }, { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_CX700_IDE), 0 }, + { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_VX855_IDE), 0 }, { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_6410), 1 }, { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_SATA_EIDE), 1 }, { 0, }, diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 06ba90c211a..0f71812d67d 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -1406,7 +1406,7 @@ #define PCI_DEVICE_ID_VIA_82C598_1 0x8598 #define PCI_DEVICE_ID_VIA_838X_1 0xB188 #define PCI_DEVICE_ID_VIA_83_87XX_1 0xB198 -#define PCI_DEVICE_ID_VIA_C409_IDE 0XC409 +#define PCI_DEVICE_ID_VIA_VX855_IDE 0xC409 #define PCI_DEVICE_ID_VIA_ANON 0xFFFF #define PCI_VENDOR_ID_SIEMENS 0x110A -- cgit v1.2.3 From 9a2845c453d170e4e9b1437fa671dbf39b0e7bd8 Mon Sep 17 00:00:00 2001 From: Corey Minyard Date: Wed, 20 May 2009 13:36:17 -0500 Subject: ipmi: fix ipmi_si modprobe hang Instead of queuing IPMB messages before channel initialization, just throw them away. Nobody will be listening for them at this point, anyway, and they will clog up the queue and nothing will be delivered if we queue them. Also set the current channel to the number of channels, as this value is used to tell if the channel information has been initialized. Signed-off-by: Corey Minyard Cc: Ferenc Wagner Cc: Dan Frazier Signed-off-by: Linus Torvalds --- drivers/char/ipmi/ipmi_msghandler.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c index aa83a0865ec..09050797c76 100644 --- a/drivers/char/ipmi/ipmi_msghandler.c +++ b/drivers/char/ipmi/ipmi_msghandler.c @@ -2856,6 +2856,7 @@ int ipmi_register_smi(struct ipmi_smi_handlers *handlers, /* Assume a single IPMB channel at zero. */ intf->channels[0].medium = IPMI_CHANNEL_MEDIUM_IPMB; intf->channels[0].protocol = IPMI_CHANNEL_PROTOCOL_IPMB; + intf->curr_channel = IPMI_MAX_CHANNELS; } if (rv == 0) @@ -3648,13 +3649,13 @@ static int handle_new_recv_msg(ipmi_smi_t intf, } /* - ** We need to make sure the channels have been initialized. - ** The channel_handler routine will set the "curr_channel" - ** equal to or greater than IPMI_MAX_CHANNELS when all the - ** channels for this interface have been initialized. - */ + * We need to make sure the channels have been initialized. + * The channel_handler routine will set the "curr_channel" + * equal to or greater than IPMI_MAX_CHANNELS when all the + * channels for this interface have been initialized. + */ if (intf->curr_channel < IPMI_MAX_CHANNELS) { - requeue = 1; /* Just put the message back for now */ + requeue = 0; /* Throw the message away */ goto out; } -- cgit v1.2.3 From afe6d7e3c4a9aba020637f4ae15527a89ba31f21 Mon Sep 17 00:00:00 2001 From: Andreas Mohr Date: Fri, 22 May 2009 17:48:58 +0200 Subject: ALSA: Kill truncate warning by shortening Sigmatel-specific AC97 control name ALSA sound/core/control.c:232: Control name 'Sigmatel Surround Phase Inversion Playback Switch' truncated to 'Sigmatel Surround Phase Inversion Playback ' bootup message by omitting weird Sigmatel prefix in this case; also fix up the related ca0106 mixer control removal part by using identical naming there. Signed-off-by: Andreas Mohr Signed-off-by: Takashi Iwai --- sound/pci/ac97/ac97_patch.c | 7 +++++-- sound/pci/ca0106/ca0106_mixer.c | 2 +- 2 files changed, 6 insertions(+), 3 deletions(-) diff --git a/sound/pci/ac97/ac97_patch.c b/sound/pci/ac97/ac97_patch.c index 81bc93e5f1e..7337abdbe4e 100644 --- a/sound/pci/ac97/ac97_patch.c +++ b/sound/pci/ac97/ac97_patch.c @@ -958,10 +958,13 @@ static int patch_sigmatel_stac9708_3d(struct snd_ac97 * ac97) } static const struct snd_kcontrol_new snd_ac97_sigmatel_4speaker = -AC97_SINGLE("Sigmatel 4-Speaker Stereo Playback Switch", AC97_SIGMATEL_DAC2INVERT, 2, 1, 0); +AC97_SINGLE("Sigmatel 4-Speaker Stereo Playback Switch", + AC97_SIGMATEL_DAC2INVERT, 2, 1, 0); +/* "Sigmatel " removed due to excessive name length: */ static const struct snd_kcontrol_new snd_ac97_sigmatel_phaseinvert = -AC97_SINGLE("Sigmatel Surround Phase Inversion Playback Switch", AC97_SIGMATEL_DAC2INVERT, 3, 1, 0); +AC97_SINGLE("Surround Phase Inversion Playback Switch", + AC97_SIGMATEL_DAC2INVERT, 3, 1, 0); static const struct snd_kcontrol_new snd_ac97_sigmatel_controls[] = { AC97_SINGLE("Sigmatel DAC 6dB Attenuate", AC97_SIGMATEL_ANALOG, 1, 1, 0), diff --git a/sound/pci/ca0106/ca0106_mixer.c b/sound/pci/ca0106/ca0106_mixer.c index ad2888705d2..c111efe61c3 100644 --- a/sound/pci/ca0106/ca0106_mixer.c +++ b/sound/pci/ca0106/ca0106_mixer.c @@ -800,7 +800,7 @@ int __devinit snd_ca0106_mixer(struct snd_ca0106 *emu) "Capture Volume", "External Amplifier", "Sigmatel 4-Speaker Stereo Playback Switch", - "Sigmatel Surround Phase Inversion Playback ", + "Surround Phase Inversion Playback Switch", NULL }; static char *ca0106_rename_ctls[] = { -- cgit v1.2.3 From 95caa0a9bdaf93607bd0cc8932f53112496f2f22 Mon Sep 17 00:00:00 2001 From: Breno Leitao Date: Fri, 22 May 2009 21:30:39 -0300 Subject: icom: fix rmmod crash Actually the icom driver is crashing when is being removed because the driver is kfreeing the adapter structure before calling pci_release_regions(), which result in the following error: Unable to handle kernel paging request for data at address 0x6b6b6b6b6b6b6d33 Faulting instruction address: 0xc000000000246b80 Oops: Kernel access of bad area, sig: 11 [#1] .... [c000000012d436a0] [c0000000001002d0] .kfree+0x120/0x34c (unreliable) [c000000012d43730] [c000000000246d60] .pci_release_selected_regions+0x3c/0x68 [c000000012d437c0] [d000000002d54700] .icom_kref_release+0xf4/0x118 [icom] [c000000012d43850] [c000000000232e50] .kref_put+0x74/0x94 [c000000012d438d0] [d000000002d56c58] .icom_remove+0x40/0xa4 [icom] [c000000012d43960] [c000000000249e48] .pci_device_remove+0x50/0x90 [c000000012d439e0] [c0000000002d68d8] .__device_release_driver+0x94/0xd4 [c000000012d43a70] [c0000000002d7104] .driver_detach+0xf8/0x12c [c000000012d43b00] [c0000000002d549c] .bus_remove_driver+0xbc/0x11c [c000000012d43b90] [c0000000002d71dc] .driver_unregister+0x60/0x80 [c000000012d43c20] [c00000000024a07c] .pci_unregister_driver+0x44/0xe8 [c000000012d43cb0] [d000000002d56bf4] .icom_exit+0x1c/0x40 [icom] [c000000012d43d30] [c000000000095fa8] .SyS_delete_module+0x214/0x2a8 [c000000012d43e30] [c00000000000852c] syscall_exit+0x0/0x40 Signed-off-by: Breno Leitao Cc: stable@kernel.org Cc: Alan Cox Signed-off-by: Linus Torvalds --- drivers/serial/icom.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/serial/icom.c b/drivers/serial/icom.c index 6579e2be1dd..a461b3b2c72 100644 --- a/drivers/serial/icom.c +++ b/drivers/serial/icom.c @@ -1472,8 +1472,8 @@ static void icom_remove_adapter(struct icom_adapter *icom_adapter) free_irq(icom_adapter->pci_dev->irq, (void *) icom_adapter); iounmap(icom_adapter->base_addr); - icom_free_adapter(icom_adapter); pci_release_regions(icom_adapter->pci_dev); + icom_free_adapter(icom_adapter); } static void icom_kref_release(struct kref *kref) -- cgit v1.2.3 From 8db14ca12569fe885694bd3d5ff84c2d973d3cb0 Mon Sep 17 00:00:00 2001 From: Steve French Date: Sat, 23 May 2009 18:57:25 +0000 Subject: [CIFS] Avoid open on possible directories since Samba now rejects them Small change (mostly formatting) to limit lookup based open calls to file create only. After discussion yesteday on samba-technical about the posix lookup regression, and looking at a problem with cifs posix open to one particular Samba version, Jeff and JRA realized that Samba server's behavior changed in this area (posix open behavior on files vs. directories). To make this behavior consistent, JRA just made a fix to Samba server to alter how it handles open of directories (now returning the equivalent of EISDIR instead of success). Since we don't know at lookup time whether the inode is a directory or file (and thus whether posix open will succeed with most current Samba server), this change avoids the posix open code on lookup open (just issues posix open on creates). This gets the semantic benefits we want (atomicity, posix byte range locks, improved write semantics on newly created files) and file create still is fast, and we avoid the problem that Jeff noticed yesterday with "openat" (and some open directory calls) of non-cached directories to one version of Samba server, and will work with future Samba versions (which include the fix jra just pushed into Samba server). I confirmed this approach with jra yesterday and with Shirish today. Posix open is only called (at lookup time) for file create now. For opens (rather than creates), because we do not know if it is a file or directory yet, and current Samba no longer allows us to do posix open on dirs, we could end up wasting an open call on what turns out to be a dir. For file opens, we wait to call posix open till cifs_open. It could be added here (lookup) in the future but the performance tradeoff of the extra network request when EISDIR or EACCES is returned would have to be weighed against the 50% reduction in network traffic in the other paths. Reviewed-by: Shirish Pargaonkar Tested-by: Jeff Layton CC: Jeremy Allison Signed-off-by: Steve French --- fs/cifs/dir.c | 43 ++++++++++++++++++++++++------------------- 1 file changed, 24 insertions(+), 19 deletions(-) diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c index f49d684edd9..3758965d73d 100644 --- a/fs/cifs/dir.c +++ b/fs/cifs/dir.c @@ -657,31 +657,36 @@ cifs_lookup(struct inode *parent_dir_inode, struct dentry *direntry, } cFYI(1, ("Full path: %s inode = 0x%p", full_path, direntry->d_inode)); + /* Posix open is only called (at lookup time) for file create now. + * For opens (rather than creates), because we do not know if it + * is a file or directory yet, and current Samba no longer allows + * us to do posix open on dirs, we could end up wasting an open call + * on what turns out to be a dir. For file opens, we wait to call posix + * open till cifs_open. It could be added here (lookup) in the future + * but the performance tradeoff of the extra network request when EISDIR + * or EACCES is returned would have to be weighed against the 50% + * reduction in network traffic in the other paths. + */ if (pTcon->unix_ext) { if (!(nd->flags & (LOOKUP_PARENT | LOOKUP_DIRECTORY)) && - (nd->flags & LOOKUP_OPEN) && !pTcon->broken_posix_open) { - if (!((nd->intent.open.flags & O_CREAT) && - (nd->intent.open.flags & O_EXCL))) { - rc = cifs_posix_open(full_path, &newInode, + (nd->flags & LOOKUP_OPEN) && !pTcon->broken_posix_open && + (nd->intent.open.flags & O_CREAT)) { + rc = cifs_posix_open(full_path, &newInode, parent_dir_inode->i_sb, nd->intent.open.create_mode, nd->intent.open.flags, &oplock, &fileHandle, xid); - /* - * This code works around a bug in - * samba posix open in samba versions 3.3.1 - * and earlier where create works - * but open fails with invalid parameter. - * If either of these error codes are - * returned, follow the normal lookup. - * Otherwise, the error during posix open - * is handled. - */ - if ((rc != -EINVAL) && (rc != -EOPNOTSUPP)) - posix_open = true; - else - pTcon->broken_posix_open = true; - } + /* + * The check below works around a bug in POSIX + * open in samba versions 3.3.1 and earlier where + * open could incorrectly fail with invalid parameter. + * If either that or op not supported returned, follow + * the normal lookup. + */ + if ((rc == 0) || (rc == -ENOENT)) + posix_open = true; + else if ((rc == -EINVAL) || (rc != -EOPNOTSUPP)) + pTcon->broken_posix_open = true; } if (!posix_open) rc = cifs_get_inode_info_unix(&newInode, full_path, -- cgit v1.2.3 From 59a3759d0fe8d969888c741bb33f4946e4d3750d Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 23 May 2009 14:47:00 -0700 Subject: Linux 2.6.30-rc7 --- Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Makefile b/Makefile index b57e1f539e8..739fd34a72a 100644 --- a/Makefile +++ b/Makefile @@ -1,8 +1,8 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 30 -EXTRAVERSION = -rc6 -NAME = Vindictive Armadillo +EXTRAVERSION = -rc7 +NAME = Man-Eating Seals of Antiquity # *DOCUMENTATION* # To see a list of typical targets execute "make help" -- cgit v1.2.3 From df4aab46a8256ac0f0c2701b3fe23b7dd05e6b48 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Mon, 4 May 2009 13:14:27 -0700 Subject: davinci: gpio irq enable tweaks Fix two IRQ triggering bugs affecting GPIO IRQs: - Make sure enabling with IRQ_TYPE_NONE ("default, unspecified") isn't a NOP ... default to both edges, at least one must work. - As noted by Kevin Hilman, setting the irq trigger type for a banked gpio interrupt shouldn't enable irqs that are disabled. Since GPIO IRQs haven't been used much yet, it's not clear these bugs could have affected anything. The few current users don't seem to have been obviously suffering from these issues. Signed-off-by: David Brownell Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/gpio.c | 20 ++++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-) diff --git a/arch/arm/mach-davinci/gpio.c b/arch/arm/mach-davinci/gpio.c index 1aba41c6351..34ba4ceda34 100644 --- a/arch/arm/mach-davinci/gpio.c +++ b/arch/arm/mach-davinci/gpio.c @@ -187,10 +187,15 @@ static void gpio_irq_enable(unsigned irq) { struct gpio_controller *__iomem g = get_irq_chip_data(irq); u32 mask = __gpio_mask(irq_to_gpio(irq)); + unsigned status = irq_desc[irq].status; - if (irq_desc[irq].status & IRQ_TYPE_EDGE_FALLING) + status &= IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING; + if (!status) + status = IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING; + + if (status & IRQ_TYPE_EDGE_FALLING) __raw_writel(mask, &g->set_falling); - if (irq_desc[irq].status & IRQ_TYPE_EDGE_RISING) + if (status & IRQ_TYPE_EDGE_RISING) __raw_writel(mask, &g->set_rising); } @@ -205,10 +210,13 @@ static int gpio_irq_type(unsigned irq, unsigned trigger) irq_desc[irq].status &= ~IRQ_TYPE_SENSE_MASK; irq_desc[irq].status |= trigger; - __raw_writel(mask, (trigger & IRQ_TYPE_EDGE_FALLING) - ? &g->set_falling : &g->clr_falling); - __raw_writel(mask, (trigger & IRQ_TYPE_EDGE_RISING) - ? &g->set_rising : &g->clr_rising); + /* don't enable the IRQ if it's currently disabled */ + if (irq_desc[irq].depth == 0) { + __raw_writel(mask, (trigger & IRQ_TYPE_EDGE_FALLING) + ? &g->set_falling : &g->clr_falling); + __raw_writel(mask, (trigger & IRQ_TYPE_EDGE_RISING) + ? &g->set_rising : &g->clr_rising); + } return 0; } -- cgit v1.2.3 From dc75602628472d7fbc4cb43f010bf0257e95ab71 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Mon, 11 May 2009 11:04:53 -0700 Subject: davinci: fixups for banked GPIO interrupt handling This patch seems to get me much more reliable performance using the GPIO banked interrupts on dm355 for the dm9000 driver. Changes include: - init GPIO handling along with normal GPIO init - mask the level-sensitive bank IRQ during handling Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/gpio.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-davinci/gpio.c b/arch/arm/mach-davinci/gpio.c index 34ba4ceda34..40327b557d7 100644 --- a/arch/arm/mach-davinci/gpio.c +++ b/arch/arm/mach-davinci/gpio.c @@ -45,6 +45,7 @@ static struct gpio_controller __iomem * __init gpio2controller(unsigned gpio) return __gpio_to_controller(gpio); } +static int __init davinci_gpio_irq_setup(void); /*--------------------------------------------------------------------------*/ @@ -157,6 +158,7 @@ static int __init davinci_gpio_setup(void) gpiochip_add(&chips[i].chip); } + davinci_gpio_irq_setup(); return 0; } pure_initcall(davinci_gpio_setup); @@ -238,6 +240,7 @@ gpio_irq_handler(unsigned irq, struct irq_desc *desc) mask <<= 16; /* temporarily mask (level sensitive) parent IRQ */ + desc->chip->mask(irq); desc->chip->ack(irq); while (1) { u32 status; @@ -333,4 +336,3 @@ static int __init davinci_gpio_irq_setup(void) return 0; } -arch_initcall(davinci_gpio_irq_setup); -- cgit v1.2.3 From 17eb15704142dc1b302a3f0cd632c426ee326b6d Mon Sep 17 00:00:00 2001 From: Chaithrika U S Date: Mon, 19 Jan 2009 14:13:05 +0530 Subject: davinci: use 32-bit accesses for low-level debug macros This patch defines debug macros for low-level debugging for Davinci based platforms Tested on : - DM644x DaVinci EVM - DM646X DaVinciHD EVM - DM355 EVM This patch attempts to solve the low-level debug issue in DM646x. The UART on DM646x SoC allows only 32-bit access. The existing debug-macro.S uses the macros from debug-8250.S file. This led to garbage serial out in the case of DM646x. The inclusion of debug-8250.S does not allow for run time fix for this issue. There are compile time errors due to multiple definitions of the macros. Also when building a single image for multiple DaVinci Platforms, the ifdefs cannot be relied upon. The solution below does not include the debug-8250.S file and defines the necessary macros. This solution was arrived at after observing that word access does not affect the low-level debug messages on DM644x/DM355. The other approach to this issue is to use the UART module information available in the peripheral registers to decide the access mechanism. But this will have to be done for every access of UART specifically for DM646x. Also this calls for a modification of the debug-8250.S file. Signed-off-by: Chaithrika U S Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/include/mach/debug-macro.S | 31 ++++++++++++++++++++++-- 1 file changed, 29 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-davinci/include/mach/debug-macro.S b/arch/arm/mach-davinci/include/mach/debug-macro.S index e6c0f0d5d06..de3fc2182b4 100644 --- a/arch/arm/mach-davinci/include/mach/debug-macro.S +++ b/arch/arm/mach-davinci/include/mach/debug-macro.S @@ -9,6 +9,16 @@ * or implied. */ +/* Modifications + * Jan 2009 Chaithrika U S Added senduart, busyuart, waituart + * macros, based on debug-8250.S file + * but using 32-bit accesses required for + * some davinci devices. + */ + +#include +#define UART_SHIFT 2 + .macro addruart, rx mrc p15, 0, \rx, c1, c0 tst \rx, #1 @ MMU enabled? @@ -17,5 +27,22 @@ orr \rx, \rx, #0x00c20000 @ UART 0 .endm -#define UART_SHIFT 2 -#include + .macro senduart,rd,rx + str \rd, [\rx, #UART_TX << UART_SHIFT] + .endm + + .macro busyuart,rd,rx +1002: ldr \rd, [\rx, #UART_LSR << UART_SHIFT] + and \rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE + teq \rd, #UART_LSR_TEMT | UART_LSR_THRE + bne 1002b + .endm + + .macro waituart,rd,rx +#ifdef FLOW_CONTROL +1001: ldr \rd, [\rx, #UART_MSR << UART_SHIFT] + tst \rd, #UART_MSR_CTS + beq 1001b +#endif + .endm + -- cgit v1.2.3 From ce8ccaf0efeb43cd23393a9590365587ad879b2a Mon Sep 17 00:00:00 2001 From: Troy Kisky Date: Mon, 11 Feb 2008 14:44:07 -0700 Subject: davinci: interrupts: get_irqnr_and_base: save an instruction Signed-off-by: Troy Kisky Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/include/mach/entry-macro.S | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/arm/mach-davinci/include/mach/entry-macro.S b/arch/arm/mach-davinci/include/mach/entry-macro.S index 039b84f933b..0ebb4454505 100644 --- a/arch/arm/mach-davinci/include/mach/entry-macro.S +++ b/arch/arm/mach-davinci/include/mach/entry-macro.S @@ -23,9 +23,8 @@ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp ldr \tmp, [\base, #0x14] - mov \tmp, \tmp, lsr #2 + movs \tmp, \tmp, lsr #2 sub \irqnr, \tmp, #1 - cmp \tmp, #0 .endm .macro irq_prio_table -- cgit v1.2.3 From 27428e39da8e45f861c79e7dcec32d38965afeb3 Mon Sep 17 00:00:00 2001 From: "Mark A. Greer" Date: Wed, 18 Feb 2009 14:00:36 -0700 Subject: davinci: support different UART bases for zImage uncompress The davinci pre-kernel boot code assumes that all platforms use the same UART base address for the console. That assumption is not longer valid with some newer SoCs so determine the console UART base address from the machine number passed in from bootloader. Signed-off-by: Mark A. Greer Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/include/mach/uncompress.h | 19 +++++++++++++++++-- 1 file changed, 17 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-davinci/include/mach/uncompress.h b/arch/arm/mach-davinci/include/mach/uncompress.h index 8c165def37b..1e27475f9a2 100644 --- a/arch/arm/mach-davinci/include/mach/uncompress.h +++ b/arch/arm/mach-davinci/include/mach/uncompress.h @@ -13,11 +13,24 @@ #include #include +#include + +extern unsigned int __machine_arch_type; + +static u32 *uart; + +static u32 *get_uart_base(void) +{ + /* Add logic here for new platforms, using __macine_arch_type */ + return (u32 *)DAVINCI_UART0_BASE; +} + /* PORT_16C550A, in polled non-fifo mode */ static void putc(char c) { - volatile u32 *uart = (volatile void *) DAVINCI_UART0_BASE; + if (!uart) + uart = get_uart_base(); while (!(uart[UART_LSR] & UART_LSR_THRE)) barrier(); @@ -26,7 +39,9 @@ static void putc(char c) static inline void flush(void) { - volatile u32 *uart = (volatile void *) DAVINCI_UART0_BASE; + if (!uart) + uart = get_uart_base(); + while (!(uart[UART_LSR] & UART_LSR_THRE)) barrier(); } -- cgit v1.2.3 From 0521444d497ee1f8a31314d2ce3c6b9edab25b51 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Wed, 11 Mar 2009 19:49:05 +0400 Subject: davinci: INTC: add support for TI cp_intc Add support for Texas Instuments Common Platform Interrupt Controller (cp_intc) used on DA830/OMAP-L137. Signed-off-by: Steve Chen Signed-off-by: Mark Greer Signed-off-by: Sergei Shtylyov Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/Kconfig | 3 + arch/arm/mach-davinci/Makefile | 1 + arch/arm/mach-davinci/cp_intc.c | 161 +++++++++++++++++++++++++++ arch/arm/mach-davinci/include/mach/cp_intc.h | 57 ++++++++++ 4 files changed, 222 insertions(+) create mode 100644 arch/arm/mach-davinci/cp_intc.c create mode 100644 arch/arm/mach-davinci/include/mach/cp_intc.h diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index a9c78bc72b8..56cd03f908e 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -1,5 +1,8 @@ if ARCH_DAVINCI +config CP_INTC + bool + menu "TI DaVinci Implementations" comment "DaVinci Core Type" diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile index 1674661942f..9a696ae60fc 100644 --- a/arch/arm/mach-davinci/Makefile +++ b/arch/arm/mach-davinci/Makefile @@ -8,6 +8,7 @@ obj-y := time.o irq.o clock.o serial.o io.o id.o psc.o \ gpio.o devices.o dma.o usb.o obj-$(CONFIG_DAVINCI_MUX) += mux.o +obj-$(CONFIG_CP_INTC) += cp_intc.o # Chip specific obj-$(CONFIG_ARCH_DAVINCI_DM644x) += dm644x.o diff --git a/arch/arm/mach-davinci/cp_intc.c b/arch/arm/mach-davinci/cp_intc.c new file mode 100644 index 00000000000..96c8e97a7de --- /dev/null +++ b/arch/arm/mach-davinci/cp_intc.c @@ -0,0 +1,161 @@ +/* + * TI Common Platform Interrupt Controller (cp_intc) driver + * + * Author: Steve Chen + * Copyright (C) 2008-2009, MontaVista Software, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include + +#include + +static void __iomem *cp_intc_base; + +static inline unsigned int cp_intc_read(unsigned offset) +{ + return __raw_readl(cp_intc_base + offset); +} + +static inline void cp_intc_write(unsigned long value, unsigned offset) +{ + __raw_writel(value, cp_intc_base + offset); +} + +static void cp_intc_ack_irq(unsigned int irq) +{ + cp_intc_write(irq, CP_INTC_SYS_STAT_IDX_CLR); +} + +/* Disable interrupt */ +static void cp_intc_mask_irq(unsigned int irq) +{ + /* XXX don't know why we need to disable nIRQ here... */ + cp_intc_write(1, CP_INTC_HOST_ENABLE_IDX_CLR); + cp_intc_write(irq, CP_INTC_SYS_ENABLE_IDX_CLR); + cp_intc_write(1, CP_INTC_HOST_ENABLE_IDX_SET); +} + +/* Enable interrupt */ +static void cp_intc_unmask_irq(unsigned int irq) +{ + cp_intc_write(irq, CP_INTC_SYS_ENABLE_IDX_SET); +} + +static int cp_intc_set_irq_type(unsigned int irq, unsigned int flow_type) +{ + unsigned reg = BIT_WORD(irq); + unsigned mask = BIT_MASK(irq); + unsigned polarity = cp_intc_read(CP_INTC_SYS_POLARITY(reg)); + unsigned type = cp_intc_read(CP_INTC_SYS_TYPE(reg)); + + switch (flow_type) { + case IRQ_TYPE_EDGE_RISING: + polarity |= mask; + type |= mask; + break; + case IRQ_TYPE_EDGE_FALLING: + polarity &= ~mask; + type |= mask; + break; + case IRQ_TYPE_LEVEL_HIGH: + polarity |= mask; + type &= ~mask; + break; + case IRQ_TYPE_LEVEL_LOW: + polarity &= ~mask; + type &= ~mask; + break; + default: + return -EINVAL; + } + + cp_intc_write(polarity, CP_INTC_SYS_POLARITY(reg)); + cp_intc_write(type, CP_INTC_SYS_TYPE(reg)); + + return 0; +} + +static struct irq_chip cp_intc_irq_chip = { + .name = "cp_intc", + .ack = cp_intc_ack_irq, + .mask = cp_intc_mask_irq, + .unmask = cp_intc_unmask_irq, + .set_type = cp_intc_set_irq_type, +}; + +void __init cp_intc_init(void __iomem *base, unsigned short num_irq, + u8 *irq_prio) +{ + unsigned num_reg = BITS_TO_LONGS(num_irq); + int i; + + cp_intc_base = base; + + cp_intc_write(0, CP_INTC_GLOBAL_ENABLE); + + /* Disable all host interrupts */ + cp_intc_write(0, CP_INTC_HOST_ENABLE(0)); + + /* Disable system interrupts */ + for (i = 0; i < num_reg; i++) + cp_intc_write(~0, CP_INTC_SYS_ENABLE_CLR(i)); + + /* Set to normal mode, no nesting, no priority hold */ + cp_intc_write(0, CP_INTC_CTRL); + cp_intc_write(0, CP_INTC_HOST_CTRL); + + /* Clear system interrupt status */ + for (i = 0; i < num_reg; i++) + cp_intc_write(~0, CP_INTC_SYS_STAT_CLR(i)); + + /* Enable nIRQ (what about nFIQ?) */ + cp_intc_write(1, CP_INTC_HOST_ENABLE_IDX_SET); + + /* + * Priority is determined by host channel: lower channel number has + * higher priority i.e. channel 0 has highest priority and channel 31 + * had the lowest priority. + */ + num_reg = (num_irq + 3) >> 2; /* 4 channels per register */ + if (irq_prio) { + unsigned j, k; + u32 val; + + for (k = i = 0; i < num_reg; i++) { + for (val = j = 0; j < 4; j++, k++) { + val >>= 8; + if (k < num_irq) + val |= irq_prio[k] << 24; + } + + cp_intc_write(val, CP_INTC_CHAN_MAP(i)); + } + } else { + /* + * Default everything to channel 15 if priority not specified. + * Note that channel 0-1 are mapped to nFIQ and channels 2-31 + * are mapped to nIRQ. + */ + for (i = 0; i < num_reg; i++) + cp_intc_write(0x0f0f0f0f, CP_INTC_CHAN_MAP(i)); + } + + /* Set up genirq dispatching for cp_intc */ + for (i = 0; i < num_irq; i++) { + set_irq_chip(i, &cp_intc_irq_chip); + set_irq_flags(i, IRQF_VALID | IRQF_PROBE); + set_irq_handler(i, handle_edge_irq); + } + + /* Enable global interrupt */ + cp_intc_write(1, CP_INTC_GLOBAL_ENABLE); +} diff --git a/arch/arm/mach-davinci/include/mach/cp_intc.h b/arch/arm/mach-davinci/include/mach/cp_intc.h new file mode 100644 index 00000000000..c4d27eec806 --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/cp_intc.h @@ -0,0 +1,57 @@ +/* + * TI Common Platform Interrupt Controller (cp_intc) definitions + * + * Author: Steve Chen + * Copyright (C) 2008-2009, MontaVista Software, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ +#ifndef __ASM_HARDWARE_CP_INTC_H +#define __ASM_HARDWARE_CP_INTC_H + +#define CP_INTC_REV 0x00 +#define CP_INTC_CTRL 0x04 +#define CP_INTC_HOST_CTRL 0x0C +#define CP_INTC_GLOBAL_ENABLE 0x10 +#define CP_INTC_GLOBAL_NESTING_LEVEL 0x1C +#define CP_INTC_SYS_STAT_IDX_SET 0x20 +#define CP_INTC_SYS_STAT_IDX_CLR 0x24 +#define CP_INTC_SYS_ENABLE_IDX_SET 0x28 +#define CP_INTC_SYS_ENABLE_IDX_CLR 0x2C +#define CP_INTC_GLOBAL_WAKEUP_ENABLE 0x30 +#define CP_INTC_HOST_ENABLE_IDX_SET 0x34 +#define CP_INTC_HOST_ENABLE_IDX_CLR 0x38 +#define CP_INTC_PACING_PRESCALE 0x40 +#define CP_INTC_VECTOR_BASE 0x50 +#define CP_INTC_VECTOR_SIZE 0x54 +#define CP_INTC_VECTOR_NULL 0x58 +#define CP_INTC_PRIO_IDX 0x80 +#define CP_INTC_PRIO_VECTOR 0x84 +#define CP_INTC_SECURE_ENABLE 0x90 +#define CP_INTC_SECURE_PRIO_IDX 0x94 +#define CP_INTC_PACING_PARAM(n) (0x0100 + (n << 4)) +#define CP_INTC_PACING_DEC(n) (0x0104 + (n << 4)) +#define CP_INTC_PACING_MAP(n) (0x0108 + (n << 4)) +#define CP_INTC_SYS_RAW_STAT(n) (0x0200 + (n << 2)) +#define CP_INTC_SYS_STAT_CLR(n) (0x0280 + (n << 2)) +#define CP_INTC_SYS_ENABLE_SET(n) (0x0300 + (n << 2)) +#define CP_INTC_SYS_ENABLE_CLR(n) (0x0380 + (n << 2)) +#define CP_INTC_CHAN_MAP(n) (0x0400 + (n << 2)) +#define CP_INTC_HOST_MAP(n) (0x0800 + (n << 2)) +#define CP_INTC_HOST_PRIO_IDX(n) (0x0900 + (n << 2)) +#define CP_INTC_SYS_POLARITY(n) (0x0D00 + (n << 2)) +#define CP_INTC_SYS_TYPE(n) (0x0D80 + (n << 2)) +#define CP_INTC_WAKEUP_ENABLE(n) (0x0E00 + (n << 2)) +#define CP_INTC_DEBUG_SELECT(n) (0x0F00 + (n << 2)) +#define CP_INTC_SYS_SECURE_ENABLE(n) (0x1000 + (n << 2)) +#define CP_INTC_HOST_NESTING_LEVEL(n) (0x1100 + (n << 2)) +#define CP_INTC_HOST_ENABLE(n) (0x1500 + (n << 2)) +#define CP_INTC_HOST_PRIO_VECTOR(n) (0x1600 + (n << 2)) +#define CP_INTC_VECTOR_ADDR(n) (0x2000 + (n << 2)) + +void __init cp_intc_init(void __iomem *base, unsigned short num_irq, + u8 *irq_prio); + +#endif /* __ASM_HARDWARE_CP_INTC_H */ -- cgit v1.2.3 From fb6313879caa46831d71a316b97b51d37d100269 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Wed, 29 Apr 2009 16:23:59 -0700 Subject: davinci: add platform support for watchdog timer Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/clock.h | 3 +++ arch/arm/mach-davinci/devices.c | 35 +++++++++++++++++++++++++++++++++++ arch/arm/mach-davinci/time.c | 9 ++++----- 3 files changed, 42 insertions(+), 5 deletions(-) diff --git a/arch/arm/mach-davinci/clock.h b/arch/arm/mach-davinci/clock.h index 35736ec202f..584494a3207 100644 --- a/arch/arm/mach-davinci/clock.h +++ b/arch/arm/mach-davinci/clock.h @@ -93,4 +93,7 @@ struct davinci_clk { } int davinci_clk_init(struct davinci_clk *clocks); + +extern struct platform_device davinci_wdt_device; + #endif diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c index a31370b93dd..7fdc408105b 100644 --- a/arch/arm/mach-davinci/devices.c +++ b/arch/arm/mach-davinci/devices.c @@ -54,3 +54,38 @@ void __init davinci_init_i2c(struct davinci_i2c_platform_data *pdata) (void) platform_device_register(&davinci_i2c_device); } +/*-------------------------------------------------------------------------*/ + +static struct resource wdt_resources[] = { + { + .start = 0x01c21c00, + .end = 0x01c21fff, + .flags = IORESOURCE_MEM, + }, +}; + +struct platform_device davinci_wdt_device = { + .name = "watchdog", + .id = -1, + .num_resources = ARRAY_SIZE(wdt_resources), + .resource = wdt_resources, +}; + +static void davinci_init_wdt(void) +{ + platform_device_register(&davinci_wdt_device); +} + +/*-------------------------------------------------------------------------*/ + +static int __init davinci_init_devices(void) +{ + /* please keep these calls, and their implementations above, + * in alphabetical order so they're easier to sort through. + */ + davinci_init_wdt(); + + return 0; +} +arch_initcall(davinci_init_devices); + diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c index 494e01bff5c..efbbc2ac63b 100644 --- a/arch/arm/mach-davinci/time.c +++ b/arch/arm/mach-davinci/time.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include @@ -349,15 +350,13 @@ struct sys_timer davinci_timer = { /* reset board using watchdog timer */ -void davinci_watchdog_reset(void) { +void davinci_watchdog_reset(void) +{ u32 tgcr, wdtcr; void __iomem *base = IO_ADDRESS(DAVINCI_WDOG_BASE); - struct device dev; struct clk *wd_clk; - char *name = "watchdog"; - dev_set_name(&dev, name); - wd_clk = clk_get(&dev, NULL); + wd_clk = clk_get(&davinci_wdt_device.dev, NULL); if (WARN_ON(IS_ERR(wd_clk))) return; clk_enable(wd_clk); -- cgit v1.2.3 From f5ce6a67a78357da5e88782b1cf1cc10b36f102c Mon Sep 17 00:00:00 2001 From: Hugo Villeneuve Date: Wed, 29 Apr 2009 16:46:57 -0700 Subject: davinci: DM644x: add support for SFFSDR board Signed-off-by: Hugo Villeneuve Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/Kconfig | 7 ++ arch/arm/mach-davinci/Makefile | 1 + arch/arm/mach-davinci/board-sffsdr.c | 180 +++++++++++++++++++++++++++++++++++ 3 files changed, 188 insertions(+) create mode 100644 arch/arm/mach-davinci/board-sffsdr.c diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index 56cd03f908e..0d8ad593a46 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -20,6 +20,13 @@ config MACH_DAVINCI_EVM Configure this option to specify the whether the board used for development is a DM644x EVM +config MACH_SFFSDR + bool "Lyrtech SFFSDR" + default n + depends on ARCH_DAVINCI_DM644x + help + Say Y here to select the Lyrtech Small Form Factor + Software Defined Radio (SFFSDR) board. config DAVINCI_MUX bool "DAVINCI multiplexing support" diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile index 9a696ae60fc..2bb6ffa3faa 100644 --- a/arch/arm/mach-davinci/Makefile +++ b/arch/arm/mach-davinci/Makefile @@ -15,3 +15,4 @@ obj-$(CONFIG_ARCH_DAVINCI_DM644x) += dm644x.o # Board specific obj-$(CONFIG_MACH_DAVINCI_EVM) += board-dm644x-evm.o +obj-$(CONFIG_MACH_SFFSDR) += board-sffsdr.o diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c new file mode 100644 index 00000000000..c6525e43ea3 --- /dev/null +++ b/arch/arm/mach-davinci/board-sffsdr.c @@ -0,0 +1,180 @@ +/* + * Lyrtech SFFSDR board support. + * + * Copyright (C) 2008 Philip Balister, OpenSDR + * Copyright (C) 2008 Lyrtech + * + * Based on DV-EVM platform, original copyright follows: + * + * Copyright (C) 2007 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x01e00000 +#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000 + +struct mtd_partition davinci_sffsdr_nandflash_partition[] = { + /* U-Boot Environment: Block 0 + * UBL: Block 1 + * U-Boot: Blocks 6-7 (256 kb) + * Integrity Kernel: Blocks 8-31 (3 Mb) + * Integrity Data: Blocks 100-END + */ + { + .name = "Linux Kernel", + .offset = 32 * SZ_128K, + .size = 16 * SZ_128K, /* 2 Mb */ + .mask_flags = MTD_WRITEABLE, /* Force read-only */ + }, + { + .name = "Linux ROOT", + .offset = MTDPART_OFS_APPEND, + .size = 256 * SZ_128K, /* 32 Mb */ + .mask_flags = 0, /* R/W */ + }, +}; + +static struct flash_platform_data davinci_sffsdr_nandflash_data = { + .parts = davinci_sffsdr_nandflash_partition, + .nr_parts = ARRAY_SIZE(davinci_sffsdr_nandflash_partition), +}; + +static struct resource davinci_sffsdr_nandflash_resource[] = { + { + .start = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE, + .end = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1, + .flags = IORESOURCE_MEM, + }, { + .start = DAVINCI_ASYNC_EMIF_CONTROL_BASE, + .end = DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device davinci_sffsdr_nandflash_device = { + .name = "davinci_nand", /* Name of driver */ + .id = 0, + .dev = { + .platform_data = &davinci_sffsdr_nandflash_data, + }, + .num_resources = ARRAY_SIZE(davinci_sffsdr_nandflash_resource), + .resource = davinci_sffsdr_nandflash_resource, +}; + +/* Get Ethernet address from kernel boot params */ +static u8 mac_addr[6] = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF}; + +static struct at24_platform_data eeprom_info = { + .byte_len = (64*1024) / 8, + .page_size = 32, + .flags = AT24_FLAG_ADDR16, +}; + +static struct i2c_board_info __initdata i2c_info[] = { + { + I2C_BOARD_INFO("24lc64", 0x50), + .platform_data = &eeprom_info, + }, + /* Other I2C devices: + * MSP430, addr 0x23 (not used) + * PCA9543, addr 0x70 (setup done by U-Boot) + * ADS7828, addr 0x48 (ADC for voltage monitoring.) + */ +}; + +static struct davinci_i2c_platform_data i2c_pdata = { + .bus_freq = 20 /* kHz */, + .bus_delay = 100 /* usec */, +}; + +static void __init sffsdr_init_i2c(void) +{ + davinci_init_i2c(&i2c_pdata); + i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info)); +} + +static struct platform_device *davinci_sffsdr_devices[] __initdata = { + &davinci_sffsdr_nandflash_device, +}; + +static struct davinci_uart_config uart_config __initdata = { + .enabled_uarts = (1 << 0), +}; + +static void __init davinci_sffsdr_map_io(void) +{ + davinci_map_common_io(); + dm644x_init(); +} + +static __init void davinci_sffsdr_init(void) +{ + platform_add_devices(davinci_sffsdr_devices, + ARRAY_SIZE(davinci_sffsdr_devices)); + sffsdr_init_i2c(); + davinci_serial_init(&uart_config); + setup_usb(0, 0); /* We support only peripheral mode. */ + + /* mux VLYNQ pins */ + davinci_cfg_reg(DM644X_VLYNQEN); + davinci_cfg_reg(DM644X_VLYNQWD); +} + +static __init void davinci_sffsdr_irq_init(void) +{ + davinci_irq_init(); +} + +MACHINE_START(SFFSDR, "Lyrtech SFFSDR") + /* Maintainer: Hugo Villeneuve hugo.villeneuve@lyrtech.com */ + .phys_io = IO_PHYS, + .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc, + .boot_params = (DAVINCI_DDR_BASE + 0x100), + .map_io = davinci_sffsdr_map_io, + .init_irq = davinci_sffsdr_irq_init, + .timer = &davinci_timer, + .init_machine = davinci_sffsdr_init, +MACHINE_END -- cgit v1.2.3 From 95a3477fe57e0669dcb531516f2930fe1cf27e6b Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Wed, 29 Apr 2009 12:10:55 -0700 Subject: davinci: DM355: add base SoC and board support In addition, add board support for the DM355 Evaluation Module (EVM) and the DM355 Leopard board. Original DM355 EVM support done by Sandeep Paulraj, with significant updates and improvements by David Brownell. DM355 Leopord support done by Koen Kooi. Signed-off-by: Sandeep Paulraj Signed-off-by: Koen Kooi Cc: David Brownell Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/Kconfig | 19 + arch/arm/mach-davinci/Makefile | 3 + arch/arm/mach-davinci/board-dm355-evm.c | 269 ++++++++++++++ arch/arm/mach-davinci/board-dm355-leopard.c | 268 ++++++++++++++ arch/arm/mach-davinci/dm355.c | 540 ++++++++++++++++++++++++++++ arch/arm/mach-davinci/include/mach/dm355.h | 23 ++ arch/arm/mach-davinci/include/mach/serial.h | 2 +- 7 files changed, 1123 insertions(+), 1 deletion(-) create mode 100644 arch/arm/mach-davinci/board-dm355-evm.c create mode 100644 arch/arm/mach-davinci/board-dm355-leopard.c create mode 100644 arch/arm/mach-davinci/dm355.c create mode 100644 arch/arm/mach-davinci/include/mach/dm355.h diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index 0d8ad593a46..1c3ab40e2b6 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -10,6 +10,9 @@ comment "DaVinci Core Type" config ARCH_DAVINCI_DM644x bool "DaVinci 644x based system" +config ARCH_DAVINCI_DM355 + bool "DaVinci 355 based system" + comment "DaVinci Board Type" config MACH_DAVINCI_EVM @@ -28,6 +31,22 @@ config MACH_SFFSDR Say Y here to select the Lyrtech Small Form Factor Software Defined Radio (SFFSDR) board. +config MACH_DAVINCI_DM355_EVM + bool "TI DM355 EVM" + default n + depends on ARCH_DAVINCI_DM355 + help + Configure this option to specify the whether the board used + for development is a DM355 EVM + +config MACH_DM355_LEOPARD + bool "DM355 Leopard board" + default n + depends on ARCH_DAVINCI_DM355 + help + Configure this option to specify the whether the board used + for development is a DM355 Leopard board. + config DAVINCI_MUX bool "DAVINCI multiplexing support" depends on ARCH_DAVINCI diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile index 2bb6ffa3faa..381c363d98a 100644 --- a/arch/arm/mach-davinci/Makefile +++ b/arch/arm/mach-davinci/Makefile @@ -12,7 +12,10 @@ obj-$(CONFIG_CP_INTC) += cp_intc.o # Chip specific obj-$(CONFIG_ARCH_DAVINCI_DM644x) += dm644x.o +obj-$(CONFIG_ARCH_DAVINCI_DM355) += dm355.o # Board specific obj-$(CONFIG_MACH_DAVINCI_EVM) += board-dm644x-evm.o obj-$(CONFIG_MACH_SFFSDR) += board-sffsdr.o +obj-$(CONFIG_MACH_DAVINCI_DM355_EVM) += board-dm355-evm.o +obj-$(CONFIG_MACH_DM355_LEOPARD) += board-dm355-leopard.o diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c new file mode 100644 index 00000000000..6af3c6c863a --- /dev/null +++ b/arch/arm/mach-davinci/board-dm355-evm.c @@ -0,0 +1,269 @@ +/* + * TI DaVinci EVM board support + * + * Author: Kevin Hilman, Deep Root Systems, LLC + * + * 2007 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +#define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x01e10000 +#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000 + +/* NOTE: this is geared for the standard config, with a socketed + * 2 GByte Micron NAND (MT29F16G08FAA) using 128KB sectors. If you + * swap chips, maybe with a different block size, partitioning may + * need to be changed. + */ +#define NAND_BLOCK_SIZE SZ_128K + +static struct mtd_partition davinci_nand_partitions[] = { + { + /* UBL (a few copies) plus U-Boot */ + .name = "bootloader", + .offset = 0, + .size = 15 * NAND_BLOCK_SIZE, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, { + /* U-Boot environment */ + .name = "params", + .offset = MTDPART_OFS_APPEND, + .size = 1 * NAND_BLOCK_SIZE, + .mask_flags = 0, + }, { + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = SZ_4M, + .mask_flags = 0, + }, { + .name = "filesystem1", + .offset = MTDPART_OFS_APPEND, + .size = SZ_512M, + .mask_flags = 0, + }, { + .name = "filesystem2", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + .mask_flags = 0, + } + /* two blocks with bad block table (and mirror) at the end */ +}; + +static struct davinci_nand_pdata davinci_nand_data = { + .mask_chipsel = BIT(14), + .parts = davinci_nand_partitions, + .nr_parts = ARRAY_SIZE(davinci_nand_partitions), + .ecc_mode = NAND_ECC_HW_SYNDROME, + .options = NAND_USE_FLASH_BBT, +}; + +static struct resource davinci_nand_resources[] = { + { + .start = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE, + .end = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_32M - 1, + .flags = IORESOURCE_MEM, + }, { + .start = DAVINCI_ASYNC_EMIF_CONTROL_BASE, + .end = DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device davinci_nand_device = { + .name = "davinci_nand", + .id = 0, + + .num_resources = ARRAY_SIZE(davinci_nand_resources), + .resource = davinci_nand_resources, + + .dev = { + .platform_data = &davinci_nand_data, + }, +}; + +static struct davinci_i2c_platform_data i2c_pdata = { + .bus_freq = 400 /* kHz */, + .bus_delay = 0 /* usec */, +}; + +static int dm355evm_mmc_gpios = -EINVAL; + +static void dm355evm_mmcsd_gpios(unsigned gpio) +{ + gpio_request(gpio + 0, "mmc0_ro"); + gpio_request(gpio + 1, "mmc0_cd"); + gpio_request(gpio + 2, "mmc1_ro"); + gpio_request(gpio + 3, "mmc1_cd"); + + /* we "know" these are input-only so we don't + * need to call gpio_direction_input() + */ + + dm355evm_mmc_gpios = gpio; +} + +static struct i2c_board_info dm355evm_i2c_info[] = { + { I2C_BOARD_INFO("dm355evm_msp", 0x25), + .platform_data = dm355evm_mmcsd_gpios, + /* plus irq */ }, + /* { I2C_BOARD_INFO("tlv320aic3x", 0x1b), }, */ + /* { I2C_BOARD_INFO("tvp5146", 0x5d), }, */ +}; + +static void __init evm_init_i2c(void) +{ + davinci_init_i2c(&i2c_pdata); + + gpio_request(5, "dm355evm_msp"); + gpio_direction_input(5); + dm355evm_i2c_info[0].irq = gpio_to_irq(5); + + i2c_register_board_info(1, dm355evm_i2c_info, + ARRAY_SIZE(dm355evm_i2c_info)); +} + +static struct resource dm355evm_dm9000_rsrc[] = { + { + /* addr */ + .start = 0x04014000, + .end = 0x04014001, + .flags = IORESOURCE_MEM, + }, { + /* data */ + .start = 0x04014002, + .end = 0x04014003, + .flags = IORESOURCE_MEM, + }, { + .flags = IORESOURCE_IRQ + | IORESOURCE_IRQ_HIGHEDGE /* rising (active high) */, + }, +}; + +static struct platform_device dm355evm_dm9000 = { + .name = "dm9000", + .id = -1, + .resource = dm355evm_dm9000_rsrc, + .num_resources = ARRAY_SIZE(dm355evm_dm9000_rsrc), +}; + +static struct platform_device *davinci_evm_devices[] __initdata = { + &dm355evm_dm9000, + &davinci_nand_device, +}; + +static struct davinci_uart_config uart_config __initdata = { + .enabled_uarts = (1 << 0), +}; + +static void __init dm355_evm_map_io(void) +{ + davinci_map_common_io(); + dm355_init(); +} + +/* Don't connect anything to J10 unless you're only using USB host + * mode *and* have to do so with some kind of gender-bender. If + * you have proper Mini-B or Mini-A cables (or Mini-A adapters) + * the ID pin won't need any help. + */ +#ifdef CONFIG_USB_MUSB_PERIPHERAL +#define USB_ID_VALUE 0 /* ID pulled high; *should* float */ +#else +#define USB_ID_VALUE 1 /* ID pulled low */ +#endif + +static struct spi_eeprom at25640a = { + .byte_len = SZ_64K / 8, + .name = "at25640a", + .page_size = 32, + .flags = EE_ADDR2, +}; + +static struct spi_board_info dm355_evm_spi_info[] __initconst = { + { + .modalias = "at25", + .platform_data = &at25640a, + .max_speed_hz = 10 * 1000 * 1000, /* at 3v3 */ + .bus_num = 0, + .chip_select = 0, + .mode = SPI_MODE_0, + }, +}; + +static __init void dm355_evm_init(void) +{ + struct clk *aemif; + + gpio_request(1, "dm9000"); + gpio_direction_input(1); + dm355evm_dm9000_rsrc[2].start = gpio_to_irq(1); + + aemif = clk_get(&dm355evm_dm9000.dev, "aemif"); + if (IS_ERR(aemif)) + WARN("%s: unable to get AEMIF clock\n", __func__); + else + clk_enable(aemif); + + platform_add_devices(davinci_evm_devices, + ARRAY_SIZE(davinci_evm_devices)); + evm_init_i2c(); + davinci_serial_init(&uart_config); + + /* NOTE: NAND flash timings set by the UBL are slower than + * needed by MT29F16G08FAA chips ... EMIF.A1CR is 0x40400204 + * but could be 0x0400008c for about 25% faster page reads. + */ + + gpio_request(2, "usb_id_toggle"); + gpio_direction_output(2, USB_ID_VALUE); + /* irlml6401 switches over 1A in under 8 msec */ + setup_usb(500, 8); + + dm355_init_spi0(BIT(0), dm355_evm_spi_info, + ARRAY_SIZE(dm355_evm_spi_info)); +} + +static __init void dm355_evm_irq_init(void) +{ + davinci_irq_init(); +} + +MACHINE_START(DAVINCI_DM355_EVM, "DaVinci DM355 EVM") + .phys_io = IO_PHYS, + .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc, + .boot_params = (0x80000100), + .map_io = dm355_evm_map_io, + .init_irq = dm355_evm_irq_init, + .timer = &davinci_timer, + .init_machine = dm355_evm_init, +MACHINE_END diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c new file mode 100644 index 00000000000..22f16f38a0b --- /dev/null +++ b/arch/arm/mach-davinci/board-dm355-leopard.c @@ -0,0 +1,268 @@ +/* + * DM355 leopard board support + * + * Based on board-dm355-evm.c + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +#define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x01e10000 +#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000 + +/* NOTE: this is geared for the standard config, with a socketed + * 2 GByte Micron NAND (MT29F16G08FAA) using 128KB sectors. If you + * swap chips, maybe with a different block size, partitioning may + * need to be changed. + */ +#define NAND_BLOCK_SIZE SZ_128K + +static struct mtd_partition davinci_nand_partitions[] = { + { + /* UBL (a few copies) plus U-Boot */ + .name = "bootloader", + .offset = 0, + .size = 15 * NAND_BLOCK_SIZE, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, { + /* U-Boot environment */ + .name = "params", + .offset = MTDPART_OFS_APPEND, + .size = 1 * NAND_BLOCK_SIZE, + .mask_flags = 0, + }, { + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = SZ_4M, + .mask_flags = 0, + }, { + .name = "filesystem1", + .offset = MTDPART_OFS_APPEND, + .size = SZ_512M, + .mask_flags = 0, + }, { + .name = "filesystem2", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + .mask_flags = 0, + } + /* two blocks with bad block table (and mirror) at the end */ +}; + +static struct davinci_nand_pdata davinci_nand_data = { + .mask_chipsel = BIT(14), + .parts = davinci_nand_partitions, + .nr_parts = ARRAY_SIZE(davinci_nand_partitions), + .ecc_mode = NAND_ECC_HW_SYNDROME, + .options = NAND_USE_FLASH_BBT, +}; + +static struct resource davinci_nand_resources[] = { + { + .start = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE, + .end = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_32M - 1, + .flags = IORESOURCE_MEM, + }, { + .start = DAVINCI_ASYNC_EMIF_CONTROL_BASE, + .end = DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device davinci_nand_device = { + .name = "davinci_nand", + .id = 0, + + .num_resources = ARRAY_SIZE(davinci_nand_resources), + .resource = davinci_nand_resources, + + .dev = { + .platform_data = &davinci_nand_data, + }, +}; + +static struct davinci_i2c_platform_data i2c_pdata = { + .bus_freq = 400 /* kHz */, + .bus_delay = 0 /* usec */, +}; + +static int leopard_mmc_gpio = -EINVAL; + +static void dm355leopard_mmcsd_gpios(unsigned gpio) +{ + gpio_request(gpio + 0, "mmc0_ro"); + gpio_request(gpio + 1, "mmc0_cd"); + gpio_request(gpio + 2, "mmc1_ro"); + gpio_request(gpio + 3, "mmc1_cd"); + + /* we "know" these are input-only so we don't + * need to call gpio_direction_input() + */ + + leopard_mmc_gpio = gpio; +} + +static struct i2c_board_info dm355leopard_i2c_info[] = { + { I2C_BOARD_INFO("dm355leopard_msp", 0x25), + .platform_data = dm355leopard_mmcsd_gpios, + /* plus irq */ }, + /* { I2C_BOARD_INFO("tlv320aic3x", 0x1b), }, */ + /* { I2C_BOARD_INFO("tvp5146", 0x5d), }, */ +}; + +static void __init leopard_init_i2c(void) +{ + davinci_init_i2c(&i2c_pdata); + + gpio_request(5, "dm355leopard_msp"); + gpio_direction_input(5); + dm355leopard_i2c_info[0].irq = gpio_to_irq(5); + + i2c_register_board_info(1, dm355leopard_i2c_info, + ARRAY_SIZE(dm355leopard_i2c_info)); +} + +static struct resource dm355leopard_dm9000_rsrc[] = { + { + /* addr */ + .start = 0x04000000, + .end = 0x04000001, + .flags = IORESOURCE_MEM, + }, { + /* data */ + .start = 0x04000016, + .end = 0x04000017, + .flags = IORESOURCE_MEM, + }, { + .flags = IORESOURCE_IRQ + | IORESOURCE_IRQ_HIGHEDGE /* rising (active high) */, + }, +}; + +static struct platform_device dm355leopard_dm9000 = { + .name = "dm9000", + .id = -1, + .resource = dm355leopard_dm9000_rsrc, + .num_resources = ARRAY_SIZE(dm355leopard_dm9000_rsrc), +}; + +static struct platform_device *davinci_leopard_devices[] __initdata = { + &dm355leopard_dm9000, + &davinci_nand_device, +}; + +static struct davinci_uart_config uart_config __initdata = { + .enabled_uarts = (1 << 0), +}; + +static void __init dm355_leopard_map_io(void) +{ + davinci_map_common_io(); + dm355_init(); +} + +/* Don't connect anything to J10 unless you're only using USB host + * mode *and* have to do so with some kind of gender-bender. If + * you have proper Mini-B or Mini-A cables (or Mini-A adapters) + * the ID pin won't need any help. + */ +#ifdef CONFIG_USB_MUSB_PERIPHERAL +#define USB_ID_VALUE 0 /* ID pulled high; *should* float */ +#else +#define USB_ID_VALUE 1 /* ID pulled low */ +#endif + +static struct spi_eeprom at25640a = { + .byte_len = SZ_64K / 8, + .name = "at25640a", + .page_size = 32, + .flags = EE_ADDR2, +}; + +static struct spi_board_info dm355_leopard_spi_info[] __initconst = { + { + .modalias = "at25", + .platform_data = &at25640a, + .max_speed_hz = 10 * 1000 * 1000, /* at 3v3 */ + .bus_num = 0, + .chip_select = 0, + .mode = SPI_MODE_0, + }, +}; + +static __init void dm355_leopard_init(void) +{ + struct clk *aemif; + + gpio_request(9, "dm9000"); + gpio_direction_input(9); + dm355leopard_dm9000_rsrc[2].start = gpio_to_irq(9); + + aemif = clk_get(&dm355leopard_dm9000.dev, "aemif"); + if (IS_ERR(aemif)) + WARN("%s: unable to get AEMIF clock\n", __func__); + else + clk_enable(aemif); + + platform_add_devices(davinci_leopard_devices, + ARRAY_SIZE(davinci_leopard_devices)); + leopard_init_i2c(); + davinci_serial_init(&uart_config); + + /* NOTE: NAND flash timings set by the UBL are slower than + * needed by MT29F16G08FAA chips ... EMIF.A1CR is 0x40400204 + * but could be 0x0400008c for about 25% faster page reads. + */ + + gpio_request(2, "usb_id_toggle"); + gpio_direction_output(2, USB_ID_VALUE); + /* irlml6401 switches over 1A in under 8 msec */ + setup_usb(500, 8); + + dm355_init_spi0(BIT(0), dm355_leopard_spi_info, + ARRAY_SIZE(dm355_leopard_spi_info)); +} + +static __init void dm355_leopard_irq_init(void) +{ + davinci_irq_init(); +} + +MACHINE_START(DM355_LEOPARD, "DaVinci DM355 leopard") + .phys_io = IO_PHYS, + .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc, + .boot_params = (0x80000100), + .map_io = dm355_leopard_map_io, + .init_irq = dm355_leopard_irq_init, + .timer = &davinci_timer, + .init_machine = dm355_leopard_init, +MACHINE_END diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c new file mode 100644 index 00000000000..c02115f1eb9 --- /dev/null +++ b/arch/arm/mach-davinci/dm355.c @@ -0,0 +1,540 @@ +/* + * TI DaVinci DM355 chip specific setup + * + * Author: Kevin Hilman, Deep Root Systems, LLC + * + * 2007 (c) Deep Root Systems, LLC. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#include +#include +#include +#include +#include + +#include + +#include +#include +#include +#include +#include +#include +#include + +#include "clock.h" +#include "mux.h" + +/* + * Device specific clocks + */ +#define DM355_REF_FREQ 24000000 /* 24 or 36 MHz */ + +static struct pll_data pll1_data = { + .num = 1, + .phys_base = DAVINCI_PLL1_BASE, + .flags = PLL_HAS_PREDIV | PLL_HAS_POSTDIV, +}; + +static struct pll_data pll2_data = { + .num = 2, + .phys_base = DAVINCI_PLL2_BASE, + .flags = PLL_HAS_PREDIV, +}; + +static struct clk ref_clk = { + .name = "ref_clk", + /* FIXME -- crystal rate is board-specific */ + .rate = DM355_REF_FREQ, +}; + +static struct clk pll1_clk = { + .name = "pll1", + .parent = &ref_clk, + .flags = CLK_PLL, + .pll_data = &pll1_data, +}; + +static struct clk pll1_aux_clk = { + .name = "pll1_aux_clk", + .parent = &pll1_clk, + .flags = CLK_PLL | PRE_PLL, +}; + +static struct clk pll1_sysclk1 = { + .name = "pll1_sysclk1", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV1, +}; + +static struct clk pll1_sysclk2 = { + .name = "pll1_sysclk2", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV2, +}; + +static struct clk pll1_sysclk3 = { + .name = "pll1_sysclk3", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV3, +}; + +static struct clk pll1_sysclk4 = { + .name = "pll1_sysclk4", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV4, +}; + +static struct clk pll1_sysclkbp = { + .name = "pll1_sysclkbp", + .parent = &pll1_clk, + .flags = CLK_PLL | PRE_PLL, + .div_reg = BPDIV +}; + +static struct clk vpss_dac_clk = { + .name = "vpss_dac", + .parent = &pll1_sysclk3, + .lpsc = DM355_LPSC_VPSS_DAC, +}; + +static struct clk vpss_master_clk = { + .name = "vpss_master", + .parent = &pll1_sysclk4, + .lpsc = DAVINCI_LPSC_VPSSMSTR, + .flags = CLK_PSC, +}; + +static struct clk vpss_slave_clk = { + .name = "vpss_slave", + .parent = &pll1_sysclk4, + .lpsc = DAVINCI_LPSC_VPSSSLV, +}; + + +static struct clk clkout1_clk = { + .name = "clkout1", + .parent = &pll1_aux_clk, + /* NOTE: clkout1 can be externally gated by muxing GPIO-18 */ +}; + +static struct clk clkout2_clk = { + .name = "clkout2", + .parent = &pll1_sysclkbp, +}; + +static struct clk pll2_clk = { + .name = "pll2", + .parent = &ref_clk, + .flags = CLK_PLL, + .pll_data = &pll2_data, +}; + +static struct clk pll2_sysclk1 = { + .name = "pll2_sysclk1", + .parent = &pll2_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV1, +}; + +static struct clk pll2_sysclkbp = { + .name = "pll2_sysclkbp", + .parent = &pll2_clk, + .flags = CLK_PLL | PRE_PLL, + .div_reg = BPDIV +}; + +static struct clk clkout3_clk = { + .name = "clkout3", + .parent = &pll2_sysclkbp, + /* NOTE: clkout3 can be externally gated by muxing GPIO-16 */ +}; + +static struct clk arm_clk = { + .name = "arm_clk", + .parent = &pll1_sysclk1, + .lpsc = DAVINCI_LPSC_ARM, + .flags = ALWAYS_ENABLED, +}; + +/* + * NOT LISTED below, and not touched by Linux + * - in SyncReset state by default + * .lpsc = DAVINCI_LPSC_TPCC, + * .lpsc = DAVINCI_LPSC_TPTC0, + * .lpsc = DAVINCI_LPSC_TPTC1, + * .lpsc = DAVINCI_LPSC_DDR_EMIF, .parent = &sysclk2_clk, + * .lpsc = DAVINCI_LPSC_MEMSTICK, + * - in Enabled state by default + * .lpsc = DAVINCI_LPSC_SYSTEM_SUBSYS, + * .lpsc = DAVINCI_LPSC_SCR2, // "bus" + * .lpsc = DAVINCI_LPSC_SCR3, // "bus" + * .lpsc = DAVINCI_LPSC_SCR4, // "bus" + * .lpsc = DAVINCI_LPSC_CROSSBAR, // "emulation" + * .lpsc = DAVINCI_LPSC_CFG27, // "test" + * .lpsc = DAVINCI_LPSC_CFG3, // "test" + * .lpsc = DAVINCI_LPSC_CFG5, // "test" + */ + +static struct clk mjcp_clk = { + .name = "mjcp", + .parent = &pll1_sysclk1, + .lpsc = DAVINCI_LPSC_IMCOP, +}; + +static struct clk uart0_clk = { + .name = "uart0", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_UART0, +}; + +static struct clk uart1_clk = { + .name = "uart1", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_UART1, +}; + +static struct clk uart2_clk = { + .name = "uart2", + .parent = &pll1_sysclk2, + .lpsc = DAVINCI_LPSC_UART2, +}; + +static struct clk i2c_clk = { + .name = "i2c", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_I2C, +}; + +static struct clk asp0_clk = { + .name = "asp0", + .parent = &pll1_sysclk2, + .lpsc = DAVINCI_LPSC_McBSP, +}; + +static struct clk asp1_clk = { + .name = "asp1", + .parent = &pll1_sysclk2, + .lpsc = DM355_LPSC_McBSP1, +}; + +static struct clk mmcsd0_clk = { + .name = "mmcsd0", + .parent = &pll1_sysclk2, + .lpsc = DAVINCI_LPSC_MMC_SD, +}; + +static struct clk mmcsd1_clk = { + .name = "mmcsd1", + .parent = &pll1_sysclk2, + .lpsc = DM355_LPSC_MMC_SD1, +}; + +static struct clk spi0_clk = { + .name = "spi0", + .parent = &pll1_sysclk2, + .lpsc = DAVINCI_LPSC_SPI, +}; + +static struct clk spi1_clk = { + .name = "spi1", + .parent = &pll1_sysclk2, + .lpsc = DM355_LPSC_SPI1, +}; + +static struct clk spi2_clk = { + .name = "spi2", + .parent = &pll1_sysclk2, + .lpsc = DM355_LPSC_SPI2, +}; + +static struct clk gpio_clk = { + .name = "gpio", + .parent = &pll1_sysclk2, + .lpsc = DAVINCI_LPSC_GPIO, +}; + +static struct clk aemif_clk = { + .name = "aemif", + .parent = &pll1_sysclk2, + .lpsc = DAVINCI_LPSC_AEMIF, +}; + +static struct clk pwm0_clk = { + .name = "pwm0", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_PWM0, +}; + +static struct clk pwm1_clk = { + .name = "pwm1", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_PWM1, +}; + +static struct clk pwm2_clk = { + .name = "pwm2", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_PWM2, +}; + +static struct clk pwm3_clk = { + .name = "pwm3", + .parent = &pll1_aux_clk, + .lpsc = DM355_LPSC_PWM3, +}; + +static struct clk timer0_clk = { + .name = "timer0", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_TIMER0, +}; + +static struct clk timer1_clk = { + .name = "timer1", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_TIMER1, +}; + +static struct clk timer2_clk = { + .name = "timer2", + .parent = &pll1_aux_clk, + .lpsc = DAVINCI_LPSC_TIMER2, + .usecount = 1, /* REVISIT: why cant' this be disabled? */ +}; + +static struct clk timer3_clk = { + .name = "timer3", + .parent = &pll1_aux_clk, + .lpsc = DM355_LPSC_TIMER3, +}; + +static struct clk rto_clk = { + .name = "rto", + .parent = &pll1_aux_clk, + .lpsc = DM355_LPSC_RTO, +}; + +static struct clk usb_clk = { + .name = "usb", + .parent = &pll1_sysclk2, + .lpsc = DAVINCI_LPSC_USB, +}; + +static struct davinci_clk dm355_clks[] = { + CLK(NULL, "ref", &ref_clk), + CLK(NULL, "pll1", &pll1_clk), + CLK(NULL, "pll1_sysclk1", &pll1_sysclk1), + CLK(NULL, "pll1_sysclk2", &pll1_sysclk2), + CLK(NULL, "pll1_sysclk3", &pll1_sysclk3), + CLK(NULL, "pll1_sysclk4", &pll1_sysclk4), + CLK(NULL, "pll1_aux", &pll1_aux_clk), + CLK(NULL, "pll1_sysclkbp", &pll1_sysclkbp), + CLK(NULL, "vpss_dac", &vpss_dac_clk), + CLK(NULL, "vpss_master", &vpss_master_clk), + CLK(NULL, "vpss_slave", &vpss_slave_clk), + CLK(NULL, "clkout1", &clkout1_clk), + CLK(NULL, "clkout2", &clkout2_clk), + CLK(NULL, "pll2", &pll2_clk), + CLK(NULL, "pll2_sysclk1", &pll2_sysclk1), + CLK(NULL, "pll2_sysclkbp", &pll2_sysclkbp), + CLK(NULL, "clkout3", &clkout3_clk), + CLK(NULL, "arm", &arm_clk), + CLK(NULL, "mjcp", &mjcp_clk), + CLK(NULL, "uart0", &uart0_clk), + CLK(NULL, "uart1", &uart1_clk), + CLK(NULL, "uart2", &uart2_clk), + CLK("i2c_davinci.1", NULL, &i2c_clk), + CLK("soc-audio.0", NULL, &asp0_clk), + CLK("soc-audio.1", NULL, &asp1_clk), + CLK("davinci_mmc.0", NULL, &mmcsd0_clk), + CLK("davinci_mmc.1", NULL, &mmcsd1_clk), + CLK(NULL, "spi0", &spi0_clk), + CLK(NULL, "spi1", &spi1_clk), + CLK(NULL, "spi2", &spi2_clk), + CLK(NULL, "gpio", &gpio_clk), + CLK(NULL, "aemif", &aemif_clk), + CLK(NULL, "pwm0", &pwm0_clk), + CLK(NULL, "pwm1", &pwm1_clk), + CLK(NULL, "pwm2", &pwm2_clk), + CLK(NULL, "pwm3", &pwm3_clk), + CLK(NULL, "timer0", &timer0_clk), + CLK(NULL, "timer1", &timer1_clk), + CLK("watchdog", NULL, &timer2_clk), + CLK(NULL, "timer3", &timer3_clk), + CLK(NULL, "rto", &rto_clk), + CLK(NULL, "usb", &usb_clk), + CLK(NULL, NULL, NULL), +}; + +/*----------------------------------------------------------------------*/ + +static u64 dm355_spi0_dma_mask = DMA_BIT_MASK(32); + +static struct resource dm355_spi0_resources[] = { + { + .start = 0x01c66000, + .end = 0x01c667ff, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_DM355_SPINT0_1, + .flags = IORESOURCE_IRQ, + }, + /* Not yet used, so not included: + * IORESOURCE_IRQ: + * - IRQ_DM355_SPINT0_0 + * IORESOURCE_DMA: + * - DAVINCI_DMA_SPI_SPIX + * - DAVINCI_DMA_SPI_SPIR + */ +}; + +static struct platform_device dm355_spi0_device = { + .name = "spi_davinci", + .id = 0, + .dev = { + .dma_mask = &dm355_spi0_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .num_resources = ARRAY_SIZE(dm355_spi0_resources), + .resource = dm355_spi0_resources, +}; + +void __init dm355_init_spi0(unsigned chipselect_mask, + struct spi_board_info *info, unsigned len) +{ + /* for now, assume we need MISO */ + davinci_cfg_reg(DM355_SPI0_SDI); + + /* not all slaves will be wired up */ + if (chipselect_mask & BIT(0)) + davinci_cfg_reg(DM355_SPI0_SDENA0); + if (chipselect_mask & BIT(1)) + davinci_cfg_reg(DM355_SPI0_SDENA1); + + spi_register_board_info(info, len); + + platform_device_register(&dm355_spi0_device); +} + +/*----------------------------------------------------------------------*/ + +/* + * Device specific mux setup + * + * soc description mux mode mode mux dbg + * reg offset mask mode + */ +static const struct mux_config dm355_pins[] = { +MUX_CFG(DM355, MMCSD0, 4, 2, 1, 0, false) + +MUX_CFG(DM355, SD1_CLK, 3, 6, 1, 1, false) +MUX_CFG(DM355, SD1_CMD, 3, 7, 1, 1, false) +MUX_CFG(DM355, SD1_DATA3, 3, 8, 3, 1, false) +MUX_CFG(DM355, SD1_DATA2, 3, 10, 3, 1, false) +MUX_CFG(DM355, SD1_DATA1, 3, 12, 3, 1, false) +MUX_CFG(DM355, SD1_DATA0, 3, 14, 3, 1, false) + +MUX_CFG(DM355, I2C_SDA, 3, 19, 1, 1, false) +MUX_CFG(DM355, I2C_SCL, 3, 20, 1, 1, false) + +MUX_CFG(DM355, MCBSP0_BDX, 3, 0, 1, 1, false) +MUX_CFG(DM355, MCBSP0_X, 3, 1, 1, 1, false) +MUX_CFG(DM355, MCBSP0_BFSX, 3, 2, 1, 1, false) +MUX_CFG(DM355, MCBSP0_BDR, 3, 3, 1, 1, false) +MUX_CFG(DM355, MCBSP0_R, 3, 4, 1, 1, false) +MUX_CFG(DM355, MCBSP0_BFSR, 3, 5, 1, 1, false) + +MUX_CFG(DM355, SPI0_SDI, 4, 1, 1, 0, false) +MUX_CFG(DM355, SPI0_SDENA0, 4, 0, 1, 0, false) +MUX_CFG(DM355, SPI0_SDENA1, 3, 28, 1, 1, false) + +INT_CFG(DM355, INT_EDMA_CC, 2, 1, 1, false) +INT_CFG(DM355, INT_EDMA_TC0_ERR, 3, 1, 1, false) +INT_CFG(DM355, INT_EDMA_TC1_ERR, 4, 1, 1, false) + +EVT_CFG(DM355, EVT8_ASP1_TX, 0, 1, 0, false) +EVT_CFG(DM355, EVT9_ASP1_RX, 1, 1, 0, false) +EVT_CFG(DM355, EVT26_MMC0_RX, 2, 1, 0, false) +}; + +/*----------------------------------------------------------------------*/ + +static const s8 dma_chan_dm355_no_event[] = { + 12, 13, 24, 56, 57, + 58, 59, 60, 61, 62, + 63, + -1 +}; + +static struct edma_soc_info dm355_edma_info = { + .n_channel = 64, + .n_region = 4, + .n_slot = 128, + .n_tc = 2, + .noevent = dma_chan_dm355_no_event, +}; + +static struct resource edma_resources[] = { + { + .name = "edma_cc", + .start = 0x01c00000, + .end = 0x01c00000 + SZ_64K - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "edma_tc0", + .start = 0x01c10000, + .end = 0x01c10000 + SZ_1K - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "edma_tc1", + .start = 0x01c10400, + .end = 0x01c10400 + SZ_1K - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_CCINT0, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_CCERRINT, + .flags = IORESOURCE_IRQ, + }, + /* not using (or muxing) TC*_ERR */ +}; + +static struct platform_device dm355_edma_device = { + .name = "edma", + .id = -1, + .dev.platform_data = &dm355_edma_info, + .num_resources = ARRAY_SIZE(edma_resources), + .resource = edma_resources, +}; + +/*----------------------------------------------------------------------*/ + +void __init dm355_init(void) +{ + davinci_clk_init(dm355_clks); + davinci_mux_register(dm355_pins, ARRAY_SIZE(dm355_pins));; +} + +static int __init dm355_init_devices(void) +{ + if (!cpu_is_davinci_dm355()) + return 0; + + davinci_cfg_reg(DM355_INT_EDMA_CC); + platform_device_register(&dm355_edma_device); + return 0; +} +postcore_initcall(dm355_init_devices); diff --git a/arch/arm/mach-davinci/include/mach/dm355.h b/arch/arm/mach-davinci/include/mach/dm355.h new file mode 100644 index 00000000000..f7100b65899 --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/dm355.h @@ -0,0 +1,23 @@ +/* + * Chip specific defines for DM355 SoC + * + * Author: Kevin Hilman, Deep Root Systems, LLC + * + * 2007 (c) Deep Root Systems, LLC. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#ifndef __ASM_ARCH_DM355_H +#define __ASM_ARCH_DM355_H + +#include + +void __init dm355_init(void); + +struct spi_board_info; + +void dm355_init_spi0(unsigned chipselect_mask, + struct spi_board_info *info, unsigned len); + +#endif /* __ASM_ARCH_DM355_H */ diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/include/mach/serial.h index 632847d74a1..761ab2b483a 100644 --- a/arch/arm/mach-davinci/include/mach/serial.h +++ b/arch/arm/mach-davinci/include/mach/serial.h @@ -18,7 +18,7 @@ #define DAVINCI_UART1_BASE (IO_PHYS + 0x20400) #define DAVINCI_UART2_BASE (IO_PHYS + 0x20800) -#define DM355_UART2_BASE (IO_PHYS + 0x206000) +#define DM355_UART2_BASE (IO_PHYS + 0x206000) /* DaVinci UART register offsets */ #define UART_DAVINCI_PWREMU 0x0c -- cgit v1.2.3 From e38d92fdcd04c79d28679682f63a83487c4c4c05 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Wed, 29 Apr 2009 17:44:58 -0700 Subject: davinci: DM646x: add base SoC and board support Add support for DM646x SoC (a.k.a DaVinci HD) and its Evalution Module (EVM.) Original support done by Sudhakar Rajashekhara. Signed-off-by: Sudhakar Rajashekhara Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/Kconfig | 12 + arch/arm/mach-davinci/Makefile | 2 + arch/arm/mach-davinci/board-dm646x-evm.c | 280 +++++++++++++++++++ arch/arm/mach-davinci/dm646x.c | 402 ++++++++++++++++++++++++++++ arch/arm/mach-davinci/include/mach/dm646x.h | 18 ++ 5 files changed, 714 insertions(+) create mode 100644 arch/arm/mach-davinci/board-dm646x-evm.c create mode 100644 arch/arm/mach-davinci/dm646x.c create mode 100644 arch/arm/mach-davinci/include/mach/dm646x.h diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index 1c3ab40e2b6..d7614a0ab2f 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -13,6 +13,9 @@ config ARCH_DAVINCI_DM644x config ARCH_DAVINCI_DM355 bool "DaVinci 355 based system" +config ARCH_DAVINCI_DM646x + bool "DaVinci 646x based system" + comment "DaVinci Board Type" config MACH_DAVINCI_EVM @@ -47,6 +50,15 @@ config MACH_DM355_LEOPARD Configure this option to specify the whether the board used for development is a DM355 Leopard board. +config MACH_DAVINCI_DM6467_EVM + bool "TI DM6467 EVM" + default n + depends on ARCH_DAVINCI_DM646x + help + Configure this option to specify the whether the board used + for development is a DM6467 EVM + + config DAVINCI_MUX bool "DAVINCI multiplexing support" depends on ARCH_DAVINCI diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile index 381c363d98a..2873149da7f 100644 --- a/arch/arm/mach-davinci/Makefile +++ b/arch/arm/mach-davinci/Makefile @@ -13,9 +13,11 @@ obj-$(CONFIG_CP_INTC) += cp_intc.o # Chip specific obj-$(CONFIG_ARCH_DAVINCI_DM644x) += dm644x.o obj-$(CONFIG_ARCH_DAVINCI_DM355) += dm355.o +obj-$(CONFIG_ARCH_DAVINCI_DM646x) += dm646x.o # Board specific obj-$(CONFIG_MACH_DAVINCI_EVM) += board-dm644x-evm.o obj-$(CONFIG_MACH_SFFSDR) += board-sffsdr.o obj-$(CONFIG_MACH_DAVINCI_DM355_EVM) += board-dm355-evm.o obj-$(CONFIG_MACH_DM355_LEOPARD) += board-dm355-leopard.o +obj-$(CONFIG_MACH_DAVINCI_DM6467_EVM) += board-dm646x-evm.o diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c new file mode 100644 index 00000000000..94cb623b1ec --- /dev/null +++ b/arch/arm/mach-davinci/board-dm646x-evm.c @@ -0,0 +1,280 @@ +/* + * TI DaVinci DM646X EVM board + * + * Derived from: arch/arm/mach-davinci/board-evm.c + * Copyright (C) 2006 Texas Instruments. + * + * (C) 2007-2008, MontaVista Software, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + * + */ + +/************************************************************************** + * Included Files + **************************************************************************/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +static struct davinci_uart_config uart_config __initdata = { + .enabled_uarts = (1 << 0), +}; + +/* LEDS */ + +static struct gpio_led evm_leds[] = { + { .name = "DS1", .active_low = 1, }, + { .name = "DS2", .active_low = 1, }, + { .name = "DS3", .active_low = 1, }, + { .name = "DS4", .active_low = 1, }, +}; + +static __initconst struct gpio_led_platform_data evm_led_data = { + .num_leds = ARRAY_SIZE(evm_leds), + .leds = evm_leds, +}; + +static struct platform_device *evm_led_dev; + +static int evm_led_setup(struct i2c_client *client, int gpio, + unsigned int ngpio, void *c) +{ + struct gpio_led *leds = evm_leds; + int status; + + while (ngpio--) { + leds->gpio = gpio++; + leds++; + }; + + evm_led_dev = platform_device_alloc("leds-gpio", 0); + platform_device_add_data(evm_led_dev, &evm_led_data, + sizeof(evm_led_data)); + + evm_led_dev->dev.parent = &client->dev; + status = platform_device_add(evm_led_dev); + if (status < 0) { + platform_device_put(evm_led_dev); + evm_led_dev = NULL; + } + return status; +} + +static int evm_led_teardown(struct i2c_client *client, int gpio, + unsigned ngpio, void *c) +{ + if (evm_led_dev) { + platform_device_unregister(evm_led_dev); + evm_led_dev = NULL; + } + return 0; +} + +static int evm_sw_gpio[4] = { -EINVAL, -EINVAL, -EINVAL, -EINVAL }; + +static int evm_sw_setup(struct i2c_client *client, int gpio, + unsigned ngpio, void *c) +{ + int status; + int i; + char label[10]; + + for (i = 0; i < 4; ++i) { + snprintf(label, 10, "user_sw%d", i); + status = gpio_request(gpio, label); + if (status) + goto out_free; + evm_sw_gpio[i] = gpio++; + + status = gpio_direction_input(evm_sw_gpio[i]); + if (status) { + gpio_free(evm_sw_gpio[i]); + evm_sw_gpio[i] = -EINVAL; + goto out_free; + } + + status = gpio_export(evm_sw_gpio[i], 0); + if (status) { + gpio_free(evm_sw_gpio[i]); + evm_sw_gpio[i] = -EINVAL; + goto out_free; + } + } + return status; +out_free: + for (i = 0; i < 4; ++i) { + if (evm_sw_gpio[i] != -EINVAL) { + gpio_free(evm_sw_gpio[i]); + evm_sw_gpio[i] = -EINVAL; + } + } + return status; +} + +static int evm_sw_teardown(struct i2c_client *client, int gpio, + unsigned ngpio, void *c) +{ + int i; + + for (i = 0; i < 4; ++i) { + if (evm_sw_gpio[i] != -EINVAL) { + gpio_unexport(evm_sw_gpio[i]); + gpio_free(evm_sw_gpio[i]); + evm_sw_gpio[i] = -EINVAL; + } + } + return 0; +} + +static int evm_pcf_setup(struct i2c_client *client, int gpio, + unsigned int ngpio, void *c) +{ + int status; + + if (ngpio < 8) + return -EINVAL; + + status = evm_sw_setup(client, gpio, 4, c); + if (status) + return status; + + return evm_led_setup(client, gpio+4, 4, c); +} + +static int evm_pcf_teardown(struct i2c_client *client, int gpio, + unsigned int ngpio, void *c) +{ + BUG_ON(ngpio < 8); + + evm_sw_teardown(client, gpio, 4, c); + evm_led_teardown(client, gpio+4, 4, c); + + return 0; +} + +static struct pcf857x_platform_data pcf_data = { + .gpio_base = DAVINCI_N_GPIO+1, + .setup = evm_pcf_setup, + .teardown = evm_pcf_teardown, +}; + +/* Most of this EEPROM is unused, but U-Boot uses some data: + * - 0x7f00, 6 bytes Ethernet Address + * - ... newer boards may have more + */ +static struct memory_accessor *at24_mem_acc; + +static void at24_setup(struct memory_accessor *mem_acc, void *context) +{ + char mac_addr[6]; + + at24_mem_acc = mem_acc; + + /* Read MAC addr from EEPROM */ + if (at24_mem_acc->read(at24_mem_acc, mac_addr, 0x7f00, ETH_ALEN) == + ETH_ALEN) + pr_info("Read MAC addr from EEPROM: %pM\n", mac_addr); +} + +static struct at24_platform_data eeprom_info = { + .byte_len = (256*1024) / 8, + .page_size = 64, + .flags = AT24_FLAG_ADDR16, + .setup = at24_setup, +}; + +int dm646xevm_eeprom_read(void *buf, off_t off, size_t count) +{ + if (at24_mem_acc) + return at24_mem_acc->read(at24_mem_acc, buf, off, count); + return -ENODEV; +} +EXPORT_SYMBOL(dm646xevm_eeprom_read); + +int dm646xevm_eeprom_write(void *buf, off_t off, size_t count) +{ + if (at24_mem_acc) + return at24_mem_acc->write(at24_mem_acc, buf, off, count); + return -ENODEV; +} +EXPORT_SYMBOL(dm646xevm_eeprom_write); + +static struct i2c_board_info __initdata i2c_info[] = { + { + I2C_BOARD_INFO("24c256", 0x50), + .platform_data = &eeprom_info, + }, + { + I2C_BOARD_INFO("pcf8574a", 0x38), + .platform_data = &pcf_data, + }, +}; + +static struct davinci_i2c_platform_data i2c_pdata = { + .bus_freq = 100 /* kHz */, + .bus_delay = 0 /* usec */, +}; + +static void __init evm_init_i2c(void) +{ + davinci_init_i2c(&i2c_pdata); + i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info)); +} + +static void __init davinci_map_io(void) +{ + davinci_map_common_io(); + dm646x_init(); +} + +static __init void evm_init(void) +{ + evm_init_i2c(); + davinci_serial_init(&uart_config); +} + +static __init void davinci_dm646x_evm_irq_init(void) +{ + davinci_irq_init(); +} + +MACHINE_START(DAVINCI_DM6467_EVM, "DaVinci DM646x EVM") + .phys_io = IO_PHYS, + .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc, + .boot_params = (0x80000100), + .map_io = davinci_map_io, + .init_irq = davinci_dm646x_evm_irq_init, + .timer = &davinci_timer, + .init_machine = evm_init, +MACHINE_END + diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c new file mode 100644 index 00000000000..93443a6637e --- /dev/null +++ b/arch/arm/mach-davinci/dm646x.c @@ -0,0 +1,402 @@ +/* + * TI DaVinci DM644x chip specific setup + * + * Author: Kevin Hilman, Deep Root Systems, LLC + * + * 2007 (c) Deep Root Systems, LLC. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +#include "clock.h" +#include "mux.h" + +/* + * Device specific clocks + */ +#define DM646X_REF_FREQ 27000000 +#define DM646X_AUX_FREQ 24000000 + +static struct pll_data pll1_data = { + .num = 1, + .phys_base = DAVINCI_PLL1_BASE, +}; + +static struct pll_data pll2_data = { + .num = 2, + .phys_base = DAVINCI_PLL2_BASE, +}; + +static struct clk ref_clk = { + .name = "ref_clk", + .rate = DM646X_REF_FREQ, +}; + +static struct clk aux_clkin = { + .name = "aux_clkin", + .rate = DM646X_AUX_FREQ, +}; + +static struct clk pll1_clk = { + .name = "pll1", + .parent = &ref_clk, + .pll_data = &pll1_data, + .flags = CLK_PLL, +}; + +static struct clk pll1_sysclk1 = { + .name = "pll1_sysclk1", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV1, +}; + +static struct clk pll1_sysclk2 = { + .name = "pll1_sysclk2", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV2, +}; + +static struct clk pll1_sysclk3 = { + .name = "pll1_sysclk3", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV3, +}; + +static struct clk pll1_sysclk4 = { + .name = "pll1_sysclk4", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV4, +}; + +static struct clk pll1_sysclk5 = { + .name = "pll1_sysclk5", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV5, +}; + +static struct clk pll1_sysclk6 = { + .name = "pll1_sysclk6", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV6, +}; + +static struct clk pll1_sysclk8 = { + .name = "pll1_sysclk8", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV8, +}; + +static struct clk pll1_sysclk9 = { + .name = "pll1_sysclk9", + .parent = &pll1_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV9, +}; + +static struct clk pll1_sysclkbp = { + .name = "pll1_sysclkbp", + .parent = &pll1_clk, + .flags = CLK_PLL | PRE_PLL, + .div_reg = BPDIV, +}; + +static struct clk pll1_aux_clk = { + .name = "pll1_aux_clk", + .parent = &pll1_clk, + .flags = CLK_PLL | PRE_PLL, +}; + +static struct clk pll2_clk = { + .name = "pll2_clk", + .parent = &ref_clk, + .pll_data = &pll2_data, + .flags = CLK_PLL, +}; + +static struct clk pll2_sysclk1 = { + .name = "pll2_sysclk1", + .parent = &pll2_clk, + .flags = CLK_PLL, + .div_reg = PLLDIV1, +}; + +static struct clk dsp_clk = { + .name = "dsp", + .parent = &pll1_sysclk1, + .lpsc = DM646X_LPSC_C64X_CPU, + .flags = PSC_DSP, + .usecount = 1, /* REVISIT how to disable? */ +}; + +static struct clk arm_clk = { + .name = "arm", + .parent = &pll1_sysclk2, + .lpsc = DM646X_LPSC_ARM, + .flags = ALWAYS_ENABLED, +}; + +static struct clk uart0_clk = { + .name = "uart0", + .parent = &aux_clkin, + .lpsc = DM646X_LPSC_UART0, +}; + +static struct clk uart1_clk = { + .name = "uart1", + .parent = &aux_clkin, + .lpsc = DM646X_LPSC_UART1, +}; + +static struct clk uart2_clk = { + .name = "uart2", + .parent = &aux_clkin, + .lpsc = DM646X_LPSC_UART2, +}; + +static struct clk i2c_clk = { + .name = "I2CCLK", + .parent = &pll1_sysclk3, + .lpsc = DM646X_LPSC_I2C, +}; + +static struct clk gpio_clk = { + .name = "gpio", + .parent = &pll1_sysclk3, + .lpsc = DM646X_LPSC_GPIO, +}; + +static struct clk aemif_clk = { + .name = "aemif", + .parent = &pll1_sysclk3, + .lpsc = DM646X_LPSC_AEMIF, + .flags = ALWAYS_ENABLED, +}; + +static struct clk emac_clk = { + .name = "emac", + .parent = &pll1_sysclk3, + .lpsc = DM646X_LPSC_EMAC, +}; + +static struct clk pwm0_clk = { + .name = "pwm0", + .parent = &pll1_sysclk3, + .lpsc = DM646X_LPSC_PWM0, + .usecount = 1, /* REVIST: disabling hangs system */ +}; + +static struct clk pwm1_clk = { + .name = "pwm1", + .parent = &pll1_sysclk3, + .lpsc = DM646X_LPSC_PWM1, + .usecount = 1, /* REVIST: disabling hangs system */ +}; + +static struct clk timer0_clk = { + .name = "timer0", + .parent = &pll1_sysclk3, + .lpsc = DM646X_LPSC_TIMER0, +}; + +static struct clk timer1_clk = { + .name = "timer1", + .parent = &pll1_sysclk3, + .lpsc = DM646X_LPSC_TIMER1, +}; + +static struct clk timer2_clk = { + .name = "timer2", + .parent = &pll1_sysclk3, + .flags = ALWAYS_ENABLED, /* no LPSC, always enabled; c.f. spruep9a */ +}; + +static struct clk vpif0_clk = { + .name = "vpif0", + .parent = &ref_clk, + .lpsc = DM646X_LPSC_VPSSMSTR, + .flags = ALWAYS_ENABLED, +}; + +static struct clk vpif1_clk = { + .name = "vpif1", + .parent = &ref_clk, + .lpsc = DM646X_LPSC_VPSSSLV, + .flags = ALWAYS_ENABLED, +}; + +struct davinci_clk dm646x_clks[] = { + CLK(NULL, "ref", &ref_clk), + CLK(NULL, "aux", &aux_clkin), + CLK(NULL, "pll1", &pll1_clk), + CLK(NULL, "pll1_sysclk", &pll1_sysclk1), + CLK(NULL, "pll1_sysclk", &pll1_sysclk2), + CLK(NULL, "pll1_sysclk", &pll1_sysclk3), + CLK(NULL, "pll1_sysclk", &pll1_sysclk4), + CLK(NULL, "pll1_sysclk", &pll1_sysclk5), + CLK(NULL, "pll1_sysclk", &pll1_sysclk6), + CLK(NULL, "pll1_sysclk", &pll1_sysclk8), + CLK(NULL, "pll1_sysclk", &pll1_sysclk9), + CLK(NULL, "pll1_sysclk", &pll1_sysclkbp), + CLK(NULL, "pll1_aux", &pll1_aux_clk), + CLK(NULL, "pll2", &pll2_clk), + CLK(NULL, "pll2_sysclk1", &pll2_sysclk1), + CLK(NULL, "dsp", &dsp_clk), + CLK(NULL, "arm", &arm_clk), + CLK(NULL, "uart0", &uart0_clk), + CLK(NULL, "uart1", &uart1_clk), + CLK(NULL, "uart2", &uart2_clk), + CLK("i2c_davinci.1", NULL, &i2c_clk), + CLK(NULL, "gpio", &gpio_clk), + CLK(NULL, "aemif", &aemif_clk), + CLK("davinci_emac.1", NULL, &emac_clk), + CLK(NULL, "pwm0", &pwm0_clk), + CLK(NULL, "pwm1", &pwm1_clk), + CLK(NULL, "timer0", &timer0_clk), + CLK(NULL, "timer1", &timer1_clk), + CLK("watchdog", NULL, &timer2_clk), + CLK(NULL, "vpif0", &vpif0_clk), + CLK(NULL, "vpif1", &vpif1_clk), + CLK(NULL, NULL, NULL), +}; + +/* + * Device specific mux setup + * + * soc description mux mode mode mux dbg + * reg offset mask mode + */ +static const struct mux_config dm646x_pins[] = { +MUX_CFG(DM646X, ATAEN, 0, 0, 1, 1, true) + +MUX_CFG(DM646X, AUDCK1, 0, 29, 1, 0, false) + +MUX_CFG(DM646X, AUDCK0, 0, 28, 1, 0, false) + +MUX_CFG(DM646X, CRGMUX, 0, 24, 7, 5, true) + +MUX_CFG(DM646X, STSOMUX_DISABLE, 0, 22, 3, 0, true) + +MUX_CFG(DM646X, STSIMUX_DISABLE, 0, 20, 3, 0, true) + +MUX_CFG(DM646X, PTSOMUX_DISABLE, 0, 18, 3, 0, true) + +MUX_CFG(DM646X, PTSIMUX_DISABLE, 0, 16, 3, 0, true) + +MUX_CFG(DM646X, STSOMUX, 0, 22, 3, 2, true) + +MUX_CFG(DM646X, STSIMUX, 0, 20, 3, 2, true) + +MUX_CFG(DM646X, PTSOMUX_PARALLEL, 0, 18, 3, 2, true) + +MUX_CFG(DM646X, PTSIMUX_PARALLEL, 0, 16, 3, 2, true) + +MUX_CFG(DM646X, PTSOMUX_SERIAL, 0, 18, 3, 3, true) + +MUX_CFG(DM646X, PTSIMUX_SERIAL, 0, 16, 3, 3, true) +}; + +/*----------------------------------------------------------------------*/ + +static const s8 dma_chan_dm646x_no_event[] = { + 0, 1, 2, 3, 13, + 14, 15, 24, 25, 26, + 27, 30, 31, 54, 55, + 56, + -1 +}; + +static struct edma_soc_info dm646x_edma_info = { + .n_channel = 64, + .n_region = 6, /* 0-1, 4-7 */ + .n_slot = 512, + .n_tc = 4, + .noevent = dma_chan_dm646x_no_event, +}; + +static struct resource edma_resources[] = { + { + .name = "edma_cc", + .start = 0x01c00000, + .end = 0x01c00000 + SZ_64K - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "edma_tc0", + .start = 0x01c10000, + .end = 0x01c10000 + SZ_1K - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "edma_tc1", + .start = 0x01c10400, + .end = 0x01c10400 + SZ_1K - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "edma_tc2", + .start = 0x01c10800, + .end = 0x01c10800 + SZ_1K - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "edma_tc3", + .start = 0x01c10c00, + .end = 0x01c10c00 + SZ_1K - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_CCINT0, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_CCERRINT, + .flags = IORESOURCE_IRQ, + }, + /* not using TC*_ERR */ +}; + +static struct platform_device dm646x_edma_device = { + .name = "edma", + .id = -1, + .dev.platform_data = &dm646x_edma_info, + .num_resources = ARRAY_SIZE(edma_resources), + .resource = edma_resources, +}; + +/*----------------------------------------------------------------------*/ + +void __init dm646x_init(void) +{ + davinci_clk_init(dm646x_clks); + davinci_mux_register(dm646x_pins, ARRAY_SIZE(dm646x_pins)); +} + +static int __init dm646x_init_devices(void) +{ + if (!cpu_is_davinci_dm646x()) + return 0; + + platform_device_register(&dm646x_edma_device); + return 0; +} +postcore_initcall(dm646x_init_devices); diff --git a/arch/arm/mach-davinci/include/mach/dm646x.h b/arch/arm/mach-davinci/include/mach/dm646x.h new file mode 100644 index 00000000000..d917939af15 --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/dm646x.h @@ -0,0 +1,18 @@ +/* + * Chip specific defines for DM646x SoC + * + * Author: Kevin Hilman, Deep Root Systems, LLC + * + * 2007 (c) Deep Root Systems, LLC. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#ifndef __ASM_ARCH_DM646X_H +#define __ASM_ARCH_DM646X_H + +#include + +void __init dm646x_init(void); + +#endif /* __ASM_ARCH_DM646X_H */ -- cgit v1.2.3 From 35652fe1858e664707cfa32e80547b210cc41f78 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Wed, 20 May 2009 16:44:44 -0700 Subject: davinci: update davinci_all_defconfig for dm355, dm6467 Signed-off-by: Kevin Hilman --- arch/arm/configs/davinci_all_defconfig | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig index eb2738b5be5..c371c653699 100644 --- a/arch/arm/configs/davinci_all_defconfig +++ b/arch/arm/configs/davinci_all_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc2 -# Wed Apr 15 08:16:53 2009 +# Linux kernel version: 2.6.30-rc6 +# Wed May 20 17:45:58 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -188,11 +188,17 @@ CONFIG_ARCH_DAVINCI=y # DaVinci Core Type # CONFIG_ARCH_DAVINCI_DM644x=y +CONFIG_ARCH_DAVINCI_DM355=y +CONFIG_ARCH_DAVINCI_DM646x=y # # DaVinci Board Type # CONFIG_MACH_DAVINCI_EVM=y +CONFIG_MACH_SFFSDR=y +CONFIG_MACH_DAVINCI_DM355_EVM=y +CONFIG_MACH_DM355_LEOPARD=y +CONFIG_MACH_DAVINCI_DM6467_EVM=y CONFIG_DAVINCI_MUX=y CONFIG_DAVINCI_MUX_DEBUG=y CONFIG_DAVINCI_MUX_WARNINGS=y @@ -661,7 +667,9 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_AX88796 is not set # CONFIG_SMC91X is not set -# CONFIG_DM9000 is not set +CONFIG_DM9000=y +CONFIG_DM9000_DEBUGLEVEL=4 +# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set # CONFIG_ETHOC is not set # CONFIG_SMC911X is not set # CONFIG_SMSC911X is not set @@ -963,6 +971,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_MFD_ASIC3 is not set +# CONFIG_MFD_DM355EVM_MSP is not set # CONFIG_HTC_EGPIO is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_TPS65010 is not set -- cgit v1.2.3 From 2dbf56aeb7986b54651c93ed171877e8179289bc Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Mon, 11 May 2009 15:55:03 -0700 Subject: davinci: MMC platform support Add SoC and platform-specific data and init for MMC driver. Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/board-dm355-evm.c | 29 +++++ arch/arm/mach-davinci/board-dm355-leopard.c | 28 +++++ arch/arm/mach-davinci/board-dm644x-evm.c | 24 +++++ arch/arm/mach-davinci/devices.c | 157 ++++++++++++++++++++++++++++ arch/arm/mach-davinci/include/mach/mmc.h | 33 ++++++ 5 files changed, 271 insertions(+) create mode 100644 arch/arm/mach-davinci/include/mach/mmc.h diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c index 6af3c6c863a..087441313dd 100644 --- a/arch/arm/mach-davinci/board-dm355-evm.c +++ b/arch/arm/mach-davinci/board-dm355-evm.c @@ -36,6 +36,7 @@ #include #include #include +#include #define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x01e10000 #define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000 @@ -191,6 +192,31 @@ static void __init dm355_evm_map_io(void) dm355_init(); } +static int dm355evm_mmc_get_cd(int module) +{ + if (!gpio_is_valid(dm355evm_mmc_gpios)) + return -ENXIO; + /* low == card present */ + return !gpio_get_value_cansleep(dm355evm_mmc_gpios + 2 * module + 1); +} + +static int dm355evm_mmc_get_ro(int module) +{ + if (!gpio_is_valid(dm355evm_mmc_gpios)) + return -ENXIO; + /* high == card's write protect switch active */ + return gpio_get_value_cansleep(dm355evm_mmc_gpios + 2 * module + 0); +} + +static struct davinci_mmc_config dm355evm_mmc_config = { + .get_cd = dm355evm_mmc_get_cd, + .get_ro = dm355evm_mmc_get_ro, + .wires = 4, + .max_freq = 50000000, + .caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED, + .version = MMC_CTLR_VERSION_1, +}; + /* Don't connect anything to J10 unless you're only using USB host * mode *and* have to do so with some kind of gender-bender. If * you have proper Mini-B or Mini-A cables (or Mini-A adapters) @@ -249,6 +275,9 @@ static __init void dm355_evm_init(void) /* irlml6401 switches over 1A in under 8 msec */ setup_usb(500, 8); + davinci_setup_mmc(0, &dm355evm_mmc_config); + davinci_setup_mmc(1, &dm355evm_mmc_config); + dm355_init_spi0(BIT(0), dm355_evm_spi_info, ARRAY_SIZE(dm355_evm_spi_info)); } diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c index 22f16f38a0b..d4562f5ff93 100644 --- a/arch/arm/mach-davinci/board-dm355-leopard.c +++ b/arch/arm/mach-davinci/board-dm355-leopard.c @@ -35,6 +35,7 @@ #include #include #include +#include #define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x01e10000 #define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000 @@ -190,6 +191,30 @@ static void __init dm355_leopard_map_io(void) dm355_init(); } +static int dm355leopard_mmc_get_cd(int module) +{ + if (!gpio_is_valid(leopard_mmc_gpio)) + return -ENXIO; + /* low == card present */ + return !gpio_get_value_cansleep(leopard_mmc_gpio + 2 * module + 1); +} + +static int dm355leopard_mmc_get_ro(int module) +{ + if (!gpio_is_valid(leopard_mmc_gpio)) + return -ENXIO; + /* high == card's write protect switch active */ + return gpio_get_value_cansleep(leopard_mmc_gpio + 2 * module + 0); +} + +static struct davinci_mmc_config dm355leopard_mmc_config = { + .get_cd = dm355leopard_mmc_get_cd, + .get_ro = dm355leopard_mmc_get_ro, + .wires = 4, + .max_freq = 50000000, + .caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED, +}; + /* Don't connect anything to J10 unless you're only using USB host * mode *and* have to do so with some kind of gender-bender. If * you have proper Mini-B or Mini-A cables (or Mini-A adapters) @@ -248,6 +273,9 @@ static __init void dm355_leopard_init(void) /* irlml6401 switches over 1A in under 8 msec */ setup_usb(500, 8); + davinci_setup_mmc(0, &dm355leopard_mmc_config); + davinci_setup_mmc(1, &dm355leopard_mmc_config); + dm355_init_spi0(BIT(0), dm355_leopard_spi_info, ARRAY_SIZE(dm355_leopard_spi_info)); } diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index b2e7f9c63bc..9c3ce311d5d 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -44,6 +44,7 @@ #include #include #include +#include #define DM644X_EVM_PHY_MASK (0x2) #define DM644X_EVM_MDIO_FREQUENCY (2200000) /* PHY bus frequency */ @@ -545,6 +546,27 @@ static int dm6444evm_msp430_get_pins(void) return (buf[3] << 8) | buf[2]; } +static int dm6444evm_mmc_get_cd(int module) +{ + int status = dm6444evm_msp430_get_pins(); + + return (status < 0) ? status : !(status & BIT(1)); +} + +static int dm6444evm_mmc_get_ro(int module) +{ + int status = dm6444evm_msp430_get_pins(); + + return (status < 0) ? status : status & BIT(6 + 8); +} + +static struct davinci_mmc_config dm6446evm_mmc_config = { + .get_cd = dm6444evm_mmc_get_cd, + .get_ro = dm6444evm_mmc_get_ro, + .wires = 4, + .version = MMC_CTLR_VERSION_1 +}; + static struct i2c_board_info __initdata i2c_info[] = { { I2C_BOARD_INFO("dm6446evm_msp", 0x23), @@ -671,6 +693,8 @@ static __init void davinci_evm_init(void) ARRAY_SIZE(davinci_evm_devices)); evm_init_i2c(); + davinci_setup_mmc(0, &dm6446evm_mmc_config); + davinci_serial_init(&uart_config); /* Register the fixup for PHY on DaVinci */ diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c index 7fdc408105b..56c19319a7d 100644 --- a/arch/arm/mach-davinci/devices.c +++ b/arch/arm/mach-davinci/devices.c @@ -23,8 +23,13 @@ #include #include #include +#include +#include #define DAVINCI_I2C_BASE 0x01C21000 +#define DAVINCI_MMCSD0_BASE 0x01E10000 +#define DM355_MMCSD0_BASE 0x01E11000 +#define DM355_MMCSD1_BASE 0x01E00000 static struct resource i2c_resources[] = { { @@ -54,6 +59,158 @@ void __init davinci_init_i2c(struct davinci_i2c_platform_data *pdata) (void) platform_device_register(&davinci_i2c_device); } +#if defined(CONFIG_MMC_DAVINCI) || defined(CONFIG_MMC_DAVINCI_MODULE) + +static u64 mmcsd0_dma_mask = DMA_32BIT_MASK; + +static struct resource mmcsd0_resources[] = { + { + /* different on dm355 */ + .start = DAVINCI_MMCSD0_BASE, + .end = DAVINCI_MMCSD0_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + /* IRQs: MMC/SD, then SDIO */ + { + .start = IRQ_MMCINT, + .flags = IORESOURCE_IRQ, + }, { + /* different on dm355 */ + .start = IRQ_SDIOINT, + .flags = IORESOURCE_IRQ, + }, + /* DMA channels: RX, then TX */ + { + .start = DAVINCI_DMA_MMCRXEVT, + .flags = IORESOURCE_DMA, + }, { + .start = DAVINCI_DMA_MMCTXEVT, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device davinci_mmcsd0_device = { + .name = "davinci_mmc", + .id = 0, + .dev = { + .dma_mask = &mmcsd0_dma_mask, + .coherent_dma_mask = DMA_32BIT_MASK, + }, + .num_resources = ARRAY_SIZE(mmcsd0_resources), + .resource = mmcsd0_resources, +}; + +static u64 mmcsd1_dma_mask = DMA_32BIT_MASK; + +static struct resource mmcsd1_resources[] = { + { + .start = DM355_MMCSD1_BASE, + .end = DM355_MMCSD1_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + /* IRQs: MMC/SD, then SDIO */ + { + .start = IRQ_DM355_MMCINT1, + .flags = IORESOURCE_IRQ, + }, { + .start = IRQ_DM355_SDIOINT1, + .flags = IORESOURCE_IRQ, + }, + /* DMA channels: RX, then TX */ + { + .start = 30, /* rx */ + .flags = IORESOURCE_DMA, + }, { + .start = 31, /* tx */ + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device davinci_mmcsd1_device = { + .name = "davinci_mmc", + .id = 1, + .dev = { + .dma_mask = &mmcsd1_dma_mask, + .coherent_dma_mask = DMA_32BIT_MASK, + }, + .num_resources = ARRAY_SIZE(mmcsd1_resources), + .resource = mmcsd1_resources, +}; + + +void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config) +{ + struct platform_device *pdev = NULL; + + if (WARN_ON(cpu_is_davinci_dm646x())) + return; + + /* REVISIT: update PINMUX, ARM_IRQMUX, and EDMA_EVTMUX here too; + * for example if MMCSD1 is used for SDIO, maybe DAT2 is unused. + * + * FIXME dm6441 (no MMC/SD), dm357 (one), and dm335 (two) are + * not handled right here ... + */ + switch (module) { + case 1: + if (!cpu_is_davinci_dm355()) + break; + + /* REVISIT we may not need all these pins if e.g. this + * is a hard-wired SDIO device... + */ + davinci_cfg_reg(DM355_SD1_CMD); + davinci_cfg_reg(DM355_SD1_CLK); + davinci_cfg_reg(DM355_SD1_DATA0); + davinci_cfg_reg(DM355_SD1_DATA1); + davinci_cfg_reg(DM355_SD1_DATA2); + davinci_cfg_reg(DM355_SD1_DATA3); + + pdev = &davinci_mmcsd1_device; + break; + case 0: + if (cpu_is_davinci_dm355()) { + mmcsd0_resources[0].start = DM355_MMCSD0_BASE; + mmcsd0_resources[0].end = DM355_MMCSD0_BASE + SZ_4K - 1; + mmcsd0_resources[2].start = IRQ_DM355_SDIOINT0; + + /* expose all 6 MMC0 signals: CLK, CMD, DATA[0..3] */ + davinci_cfg_reg(DM355_MMCSD0); + + /* enable RX EDMA */ + davinci_cfg_reg(DM355_EVT26_MMC0_RX); + } + + else if (cpu_is_davinci_dm644x()) { + /* REVISIT: should this be in board-init code? */ + void __iomem *base = + IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE); + + /* Power-on 3.3V IO cells */ + __raw_writel(0, base + DM64XX_VDD3P3V_PWDN); + /*Set up the pull regiter for MMC */ + davinci_cfg_reg(DM644X_MSTK); + } + + pdev = &davinci_mmcsd0_device; + break; + } + + if (WARN_ON(!pdev)) + return; + + pdev->dev.platform_data = config; + platform_device_register(pdev); +} + +#else + +void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config) +{ +} + +#endif + /*-------------------------------------------------------------------------*/ static struct resource wdt_resources[] = { diff --git a/arch/arm/mach-davinci/include/mach/mmc.h b/arch/arm/mach-davinci/include/mach/mmc.h new file mode 100644 index 00000000000..5a85e24f367 --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/mmc.h @@ -0,0 +1,33 @@ +/* + * Board-specific MMC configuration + */ + +#ifndef _DAVINCI_MMC_H +#define _DAVINCI_MMC_H + +#include +#include + +struct davinci_mmc_config { + /* get_cd()/get_wp() may sleep */ + int (*get_cd)(int module); + int (*get_ro)(int module); + /* wires == 0 is equivalent to wires == 4 (4-bit parallel) */ + u8 wires; + + u32 max_freq; + + /* any additional host capabilities: OR'd in to mmc->f_caps */ + u32 caps; + + /* Version of the MMC/SD controller */ + u8 version; +}; +void davinci_setup_mmc(int module, struct davinci_mmc_config *config); + +enum { + MMC_CTLR_VERSION_1 = 0, /* DM644x and DM355 */ + MMC_CTLR_VERSION_2, /* DA830 */ +}; + +#endif -- cgit v1.2.3 From ac7b75b5bbbfd60b752869a22daa3be99b5b4f99 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Thu, 7 May 2009 06:19:40 -0700 Subject: davinci: EMAC platform support Add SoC and platform-specific data and init for DaVinci EMAC network driver. Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/board-dm644x-evm.c | 37 +++++++------------ arch/arm/mach-davinci/board-dm646x-evm.c | 17 ++++++++- arch/arm/mach-davinci/board-sffsdr.c | 11 +++++- arch/arm/mach-davinci/dm644x.c | 19 ++++++++++ arch/arm/mach-davinci/dm646x.c | 57 +++++++++++++++++++++++++++++ arch/arm/mach-davinci/include/mach/dm644x.h | 2 + arch/arm/mach-davinci/include/mach/dm646x.h | 9 +++++ arch/arm/mach-davinci/include/mach/emac.h | 36 ++++++++++++++++++ 8 files changed, 161 insertions(+), 27 deletions(-) create mode 100644 arch/arm/mach-davinci/include/mach/emac.h diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index 9c3ce311d5d..02e7cdaf8da 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -16,12 +16,11 @@ #include #include #include -#include #include #include #include - +#include #include #include #include @@ -39,6 +38,7 @@ #include #include +#include #include #include #include @@ -60,6 +60,11 @@ #define LXT971_PHY_ID (0x001378e2) #define LXT971_PHY_MASK (0xfffffff0) +static struct emac_platform_data dm644x_evm_emac_pdata = { + .phy_mask = DM644X_EVM_PHY_MASK, + .mdio_max_freq = DM644X_EVM_MDIO_FREQUENCY, +}; + static struct mtd_partition davinci_evm_norflash_partitions[] = { /* bootloader (UBL, U-Boot, etc) in first 5 sectors */ { @@ -441,15 +446,15 @@ static struct memory_accessor *at24_mem_acc; static void at24_setup(struct memory_accessor *mem_acc, void *context) { - DECLARE_MAC_BUF(mac_str); - char mac_addr[6]; + char mac_addr[ETH_ALEN]; at24_mem_acc = mem_acc; /* Read MAC addr from EEPROM */ - if (at24_mem_acc->read(at24_mem_acc, mac_addr, 0x7f00, 6) == 6) { - printk(KERN_INFO "Read MAC addr from EEPROM: %s\n", - print_mac(mac_str, mac_addr)); + if (at24_mem_acc->read(at24_mem_acc, mac_addr, 0x7f00, ETH_ALEN) == + ETH_ALEN) { + printk(KERN_INFO "Read MAC addr from EEPROM: %pM\n", mac_addr); + memcpy(dm644x_evm_emac_pdata.mac_addr, mac_addr, ETH_ALEN); } } @@ -460,22 +465,6 @@ static struct at24_platform_data eeprom_info = { .setup = at24_setup, }; -int dm6446evm_eeprom_read(void *buf, off_t off, size_t count) -{ - if (at24_mem_acc) - return at24_mem_acc->read(at24_mem_acc, buf, off, count); - return -ENODEV; -} -EXPORT_SYMBOL(dm6446evm_eeprom_read); - -int dm6446evm_eeprom_write(void *buf, off_t off, size_t count) -{ - if (at24_mem_acc) - return at24_mem_acc->write(at24_mem_acc, buf, off, count); - return -ENODEV; -} -EXPORT_SYMBOL(dm6446evm_eeprom_write); - /* * MSP430 supports RTC, card detection, input from IR remote, and * a bit more. It triggers interrupts on GPIO(7) from pressing @@ -697,6 +686,8 @@ static __init void davinci_evm_init(void) davinci_serial_init(&uart_config); + dm644x_init_emac(&dm644x_evm_emac_pdata); + /* Register the fixup for PHY on DaVinci */ phy_register_fixup_for_uid(LXT971_PHY_ID, LXT971_PHY_MASK, davinci_phy_fixup); diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c index 94cb623b1ec..aedde3cdb82 100644 --- a/arch/arm/mach-davinci/board-dm646x-evm.c +++ b/arch/arm/mach-davinci/board-dm646x-evm.c @@ -45,6 +45,16 @@ #include #include #include +#include +#include + +#define DM646X_EVM_PHY_MASK (0x2) +#define DM646X_EVM_MDIO_FREQUENCY (2200000) /* PHY bus frequency */ + +static struct emac_platform_data dm646x_evm_emac_pdata = { + .phy_mask = DM646X_EVM_PHY_MASK, + .mdio_max_freq = DM646X_EVM_MDIO_FREQUENCY, +}; static struct davinci_uart_config uart_config __initdata = { .enabled_uarts = (1 << 0), @@ -196,14 +206,16 @@ static struct memory_accessor *at24_mem_acc; static void at24_setup(struct memory_accessor *mem_acc, void *context) { - char mac_addr[6]; + char mac_addr[ETH_ALEN]; at24_mem_acc = mem_acc; /* Read MAC addr from EEPROM */ if (at24_mem_acc->read(at24_mem_acc, mac_addr, 0x7f00, ETH_ALEN) == - ETH_ALEN) + ETH_ALEN) { pr_info("Read MAC addr from EEPROM: %pM\n", mac_addr); + memcpy(dm646x_evm_emac_pdata.mac_addr, mac_addr, ETH_ALEN); + } } static struct at24_platform_data eeprom_info = { @@ -261,6 +273,7 @@ static __init void evm_init(void) { evm_init_i2c(); davinci_serial_init(&uart_config); + dm646x_init_emac(&dm646x_evm_emac_pdata); } static __init void davinci_dm646x_evm_irq_init(void) diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c index c6525e43ea3..913dad93540 100644 --- a/arch/arm/mach-davinci/board-sffsdr.c +++ b/arch/arm/mach-davinci/board-sffsdr.c @@ -48,11 +48,15 @@ #include #include +#include #include #include #include #include +#define SFFSDR_PHY_MASK (0x2) +#define SFFSDR_MDIO_FREQUENCY (2200000) /* PHY bus frequency */ + #define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x01e00000 #define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000 @@ -104,8 +108,10 @@ static struct platform_device davinci_sffsdr_nandflash_device = { .resource = davinci_sffsdr_nandflash_resource, }; -/* Get Ethernet address from kernel boot params */ -static u8 mac_addr[6] = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF}; +static struct emac_platform_data sffsdr_emac_pdata = { + .phy_mask = SFFSDR_PHY_MASK, + .mdio_max_freq = SFFSDR_MDIO_FREQUENCY, +}; static struct at24_platform_data eeprom_info = { .byte_len = (64*1024) / 8, @@ -156,6 +162,7 @@ static __init void davinci_sffsdr_init(void) ARRAY_SIZE(davinci_sffsdr_devices)); sffsdr_init_i2c(); davinci_serial_init(&uart_config); + dm644x_init_emac(&sffsdr_emac_pdata); setup_usb(0, 0); /* We support only peripheral mode. */ /* mux VLYNQ pins */ diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index d428ef192ea..0419d571bdc 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -444,6 +444,25 @@ static struct platform_device dm644x_edma_device = { }; /*----------------------------------------------------------------------*/ +#if defined(CONFIG_TI_DAVINCI_EMAC) || defined(CONFIG_TI_DAVINCI_EMAC_MODULE) + +void dm644x_init_emac(struct emac_platform_data *pdata) +{ + pdata->ctrl_reg_offset = DM644X_EMAC_CNTRL_OFFSET; + pdata->ctrl_mod_reg_offset = DM644X_EMAC_CNTRL_MOD_OFFSET; + pdata->ctrl_ram_offset = DM644X_EMAC_CNTRL_RAM_OFFSET; + pdata->mdio_reg_offset = DM644X_EMAC_MDIO_OFFSET; + pdata->ctrl_ram_size = DM644X_EMAC_CNTRL_RAM_SIZE; + pdata->version = EMAC_VERSION_1; + dm644x_emac_device.dev.platform_data = pdata; + platform_device_register(&dm644x_emac_device); +} +#else + +void dm644x_init_emac(struct emac_platform_data *unused) {} + +#endif + void __init dm644x_init(void) { davinci_clk_init(dm644x_clks); diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index 93443a6637e..975ed062ce2 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -279,6 +279,44 @@ struct davinci_clk dm646x_clks[] = { CLK(NULL, NULL, NULL), }; +#if defined(CONFIG_TI_DAVINCI_EMAC) || defined(CONFIG_TI_DAVINCI_EMAC_MODULE) +static struct resource dm646x_emac_resources[] = { + { + .start = DM646X_EMAC_BASE, + .end = DM646X_EMAC_BASE + 0x47ff, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_DM646X_EMACRXTHINT, + .end = IRQ_DM646X_EMACRXTHINT, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DM646X_EMACRXINT, + .end = IRQ_DM646X_EMACRXINT, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DM646X_EMACTXINT, + .end = IRQ_DM646X_EMACTXINT, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DM646X_EMACMISCINT, + .end = IRQ_DM646X_EMACMISCINT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device dm646x_emac_device = { + .name = "davinci_emac", + .id = 1, + .num_resources = ARRAY_SIZE(dm646x_emac_resources), + .resource = dm646x_emac_resources, +}; + +#endif + /* * Device specific mux setup * @@ -385,6 +423,25 @@ static struct platform_device dm646x_edma_device = { /*----------------------------------------------------------------------*/ +#if defined(CONFIG_TI_DAVINCI_EMAC) || defined(CONFIG_TI_DAVINCI_EMAC_MODULE) + +void dm646x_init_emac(struct emac_platform_data *pdata) +{ + pdata->ctrl_reg_offset = DM646X_EMAC_CNTRL_OFFSET; + pdata->ctrl_mod_reg_offset = DM646X_EMAC_CNTRL_MOD_OFFSET; + pdata->ctrl_ram_offset = DM646X_EMAC_CNTRL_RAM_OFFSET; + pdata->mdio_reg_offset = DM646X_EMAC_MDIO_OFFSET; + pdata->ctrl_ram_size = DM646X_EMAC_CNTRL_RAM_SIZE; + pdata->version = EMAC_VERSION_2; + dm646x_emac_device.dev.platform_data = pdata; + platform_device_register(&dm646x_emac_device); +} +#else + +void dm646x_init_emac(struct emac_platform_data *unused) {} + +#endif + void __init dm646x_init(void) { davinci_clk_init(dm646x_clks); diff --git a/arch/arm/mach-davinci/include/mach/dm644x.h b/arch/arm/mach-davinci/include/mach/dm644x.h index 3dcb9f4e58b..ace167aec46 100644 --- a/arch/arm/mach-davinci/include/mach/dm644x.h +++ b/arch/arm/mach-davinci/include/mach/dm644x.h @@ -24,6 +24,7 @@ #include #include +#include #define DM644X_EMAC_BASE (0x01C80000) #define DM644X_EMAC_CNTRL_OFFSET (0x0000) @@ -33,5 +34,6 @@ #define DM644X_EMAC_CNTRL_RAM_SIZE (0x2000) void __init dm644x_init(void); +void dm644x_init_emac(struct emac_platform_data *pdata); #endif /* __ASM_ARCH_DM644X_H */ diff --git a/arch/arm/mach-davinci/include/mach/dm646x.h b/arch/arm/mach-davinci/include/mach/dm646x.h index d917939af15..ea7b28e112f 100644 --- a/arch/arm/mach-davinci/include/mach/dm646x.h +++ b/arch/arm/mach-davinci/include/mach/dm646x.h @@ -12,7 +12,16 @@ #define __ASM_ARCH_DM646X_H #include +#include + +#define DM646X_EMAC_BASE (0x01C80000) +#define DM646X_EMAC_CNTRL_OFFSET (0x0000) +#define DM646X_EMAC_CNTRL_MOD_OFFSET (0x1000) +#define DM646X_EMAC_CNTRL_RAM_OFFSET (0x2000) +#define DM646X_EMAC_MDIO_OFFSET (0x4000) +#define DM646X_EMAC_CNTRL_RAM_SIZE (0x2000) void __init dm646x_init(void); +void dm646x_init_emac(struct emac_platform_data *pdata); #endif /* __ASM_ARCH_DM646X_H */ diff --git a/arch/arm/mach-davinci/include/mach/emac.h b/arch/arm/mach-davinci/include/mach/emac.h new file mode 100644 index 00000000000..549fcced217 --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/emac.h @@ -0,0 +1,36 @@ +/* + * TI DaVinci EMAC platform support + * + * Author: Kevin Hilman, Deep Root Systems, LLC + * + * 2007 (c) Deep Root Systems, LLC. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#ifndef _MACH_DAVINCI_EMAC_H +#define _MACH_DAVINCI_EMAC_H + +#include + +struct emac_platform_data { + char mac_addr[ETH_ALEN]; + u32 ctrl_reg_offset; + u32 ctrl_mod_reg_offset; + u32 ctrl_ram_offset; + u32 mdio_reg_offset; + u32 ctrl_ram_size; + u32 phy_mask; + u32 mdio_max_freq; + u8 rmii_en; + u8 version; +}; + +enum { + EMAC_VERSION_1, /* DM644x */ + EMAC_VERSION_2, /* DM646x */ +}; +void davinci_init_emac(struct emac_platform_data *pdata); +#endif + + -- cgit v1.2.3 From 79c3c0b729647a6246c120408f36e6804dab244e Mon Sep 17 00:00:00 2001 From: "Mark A. Greer" Date: Wed, 15 Apr 2009 12:38:58 -0700 Subject: davinci: Encapsulate SoC-specific data in a structure Create a structure to encapsulate SoC-specific information. This will assist in generalizing code so it can be used by different SoCs that have similar hardware but with minor differences such as having a different base address. The idea is that the code for each SoC fills out a structure with the correct information. The board-specific code then calls the SoC init routine which in turn will call a common init routine that makes a copy of the structure, maps in I/O regions, etc. After initialization, code can get a pointer to the structure by calling davinci_get_soc_info(). Eventually, the common init routine will make a copy of all of the data pointed to by the structure so the original data can be made __init_data. That way the data for SoC's that aren't being used won't consume memory for the entire life of the kernel. The structure will be extended in subsequent patches but initially, it holds the map_desc structure for any I/O regions the SoC/board wants statically mapped. Signed-off-by: Mark A. Greer Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/Makefile | 2 +- arch/arm/mach-davinci/board-dm355-evm.c | 2 +- arch/arm/mach-davinci/board-dm355-leopard.c | 2 +- arch/arm/mach-davinci/board-dm644x-evm.c | 2 +- arch/arm/mach-davinci/board-dm646x-evm.c | 2 +- arch/arm/mach-davinci/board-sffsdr.c | 2 +- arch/arm/mach-davinci/common.c | 55 +++++++++++++++++++++++++++++ arch/arm/mach-davinci/dm355.c | 18 ++++++++++ arch/arm/mach-davinci/dm644x.c | 18 ++++++++++ arch/arm/mach-davinci/dm646x.c | 18 ++++++++++ arch/arm/mach-davinci/include/mach/common.h | 12 ++++++- arch/arm/mach-davinci/include/mach/dm355.h | 3 +- arch/arm/mach-davinci/io.c | 38 -------------------- 13 files changed, 127 insertions(+), 47 deletions(-) create mode 100644 arch/arm/mach-davinci/common.c diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile index 2873149da7f..74d25f69934 100644 --- a/arch/arm/mach-davinci/Makefile +++ b/arch/arm/mach-davinci/Makefile @@ -5,7 +5,7 @@ # Common objects obj-y := time.o irq.o clock.o serial.o io.o id.o psc.o \ - gpio.o devices.o dma.o usb.o + gpio.o devices.o dma.o usb.o common.o obj-$(CONFIG_DAVINCI_MUX) += mux.o obj-$(CONFIG_CP_INTC) += cp_intc.o diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c index 087441313dd..5ac2f565d86 100644 --- a/arch/arm/mach-davinci/board-dm355-evm.c +++ b/arch/arm/mach-davinci/board-dm355-evm.c @@ -37,6 +37,7 @@ #include #include #include +#include #define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x01e10000 #define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000 @@ -188,7 +189,6 @@ static struct davinci_uart_config uart_config __initdata = { static void __init dm355_evm_map_io(void) { - davinci_map_common_io(); dm355_init(); } diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c index d4562f5ff93..28c9008df4f 100644 --- a/arch/arm/mach-davinci/board-dm355-leopard.c +++ b/arch/arm/mach-davinci/board-dm355-leopard.c @@ -36,6 +36,7 @@ #include #include #include +#include #define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x01e10000 #define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000 @@ -187,7 +188,6 @@ static struct davinci_uart_config uart_config __initdata = { static void __init dm355_leopard_map_io(void) { - davinci_map_common_io(); dm355_init(); } diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index 02e7cdaf8da..cfe89c40973 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -45,6 +45,7 @@ #include #include #include +#include #define DM644X_EVM_PHY_MASK (0x2) #define DM644X_EVM_MDIO_FREQUENCY (2200000) /* PHY bus frequency */ @@ -609,7 +610,6 @@ static struct davinci_uart_config uart_config __initdata = { static void __init davinci_evm_map_io(void) { - davinci_map_common_io(); dm644x_init(); } diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c index aedde3cdb82..becae51d6dd 100644 --- a/arch/arm/mach-davinci/board-dm646x-evm.c +++ b/arch/arm/mach-davinci/board-dm646x-evm.c @@ -47,6 +47,7 @@ #include #include #include +#include #define DM646X_EVM_PHY_MASK (0x2) #define DM646X_EVM_MDIO_FREQUENCY (2200000) /* PHY bus frequency */ @@ -265,7 +266,6 @@ static void __init evm_init_i2c(void) static void __init davinci_map_io(void) { - davinci_map_common_io(); dm646x_init(); } diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c index 913dad93540..938b4467809 100644 --- a/arch/arm/mach-davinci/board-sffsdr.c +++ b/arch/arm/mach-davinci/board-sffsdr.c @@ -53,6 +53,7 @@ #include #include #include +#include #define SFFSDR_PHY_MASK (0x2) #define SFFSDR_MDIO_FREQUENCY (2200000) /* PHY bus frequency */ @@ -152,7 +153,6 @@ static struct davinci_uart_config uart_config __initdata = { static void __init davinci_sffsdr_map_io(void) { - davinci_map_common_io(); dm644x_init(); } diff --git a/arch/arm/mach-davinci/common.c b/arch/arm/mach-davinci/common.c new file mode 100644 index 00000000000..9a5486f5519 --- /dev/null +++ b/arch/arm/mach-davinci/common.c @@ -0,0 +1,55 @@ +/* + * Code commons to all DaVinci SoCs. + * + * Author: Mark A. Greer + * + * 2009 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#include +#include + +#include +#include + +#include + +struct davinci_soc_info davinci_soc_info; +EXPORT_SYMBOL(davinci_soc_info); + +void __init davinci_common_init(struct davinci_soc_info *soc_info) +{ + int ret; + + if (!soc_info) { + ret = -EINVAL; + goto err; + } + + memcpy(&davinci_soc_info, soc_info, sizeof(struct davinci_soc_info)); + + if (davinci_soc_info.io_desc && (davinci_soc_info.io_desc_num > 0)) + iotable_init(davinci_soc_info.io_desc, + davinci_soc_info.io_desc_num); + + /* + * Normally devicemaps_init() would flush caches and tlb after + * mdesc->map_io(), but we must also do it here because of the CPU + * revision check below. + */ + local_flush_tlb_all(); + flush_cache_all(); + + /* + * We want to check CPU revision early for cpu_is_xxxx() macros. + * IO space mapping must be initialized before we can do that. + */ + davinci_check_revision(); + + return; + +err: + pr_err("davinci_common_init: SoC Initialization failed\n"); +} diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index c02115f1eb9..6d1abfdcfb7 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -16,6 +16,8 @@ #include +#include + #include #include #include @@ -23,6 +25,7 @@ #include #include #include +#include #include "clock.h" #include "mux.h" @@ -522,8 +525,23 @@ static struct platform_device dm355_edma_device = { /*----------------------------------------------------------------------*/ +static struct map_desc dm355_io_desc[] = { + { + .virtual = IO_VIRT, + .pfn = __phys_to_pfn(IO_PHYS), + .length = IO_SIZE, + .type = MT_DEVICE + }, +}; + +static struct davinci_soc_info davinci_soc_info_dm355 = { + .io_desc = dm355_io_desc, + .io_desc_num = ARRAY_SIZE(dm355_io_desc), +}; + void __init dm355_init(void) { + davinci_common_init(&davinci_soc_info_dm355); davinci_clk_init(dm355_clks); davinci_mux_register(dm355_pins, ARRAY_SIZE(dm355_pins));; } diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index 0419d571bdc..79f113698b0 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -13,6 +13,8 @@ #include #include +#include + #include #include #include @@ -20,6 +22,7 @@ #include #include #include +#include #include "clock.h" #include "mux.h" @@ -463,8 +466,23 @@ void dm644x_init_emac(struct emac_platform_data *unused) {} #endif +static struct map_desc dm644x_io_desc[] = { + { + .virtual = IO_VIRT, + .pfn = __phys_to_pfn(IO_PHYS), + .length = IO_SIZE, + .type = MT_DEVICE + }, +}; + +static struct davinci_soc_info davinci_soc_info_dm644x = { + .io_desc = dm644x_io_desc, + .io_desc_num = ARRAY_SIZE(dm644x_io_desc), +}; + void __init dm644x_init(void) { + davinci_common_init(&davinci_soc_info_dm644x); davinci_clk_init(dm644x_clks); davinci_mux_register(dm644x_pins, ARRAY_SIZE(dm644x_pins)); } diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index 975ed062ce2..8547ec02c9e 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -13,6 +13,8 @@ #include #include +#include + #include #include #include @@ -20,6 +22,7 @@ #include #include #include +#include #include "clock.h" #include "mux.h" @@ -442,8 +445,23 @@ void dm646x_init_emac(struct emac_platform_data *unused) {} #endif +static struct map_desc dm646x_io_desc[] = { + { + .virtual = IO_VIRT, + .pfn = __phys_to_pfn(IO_PHYS), + .length = IO_SIZE, + .type = MT_DEVICE + }, +}; + +static struct davinci_soc_info davinci_soc_info_dm646x = { + .io_desc = dm646x_io_desc, + .io_desc_num = ARRAY_SIZE(dm646x_io_desc), +}; + void __init dm646x_init(void) { + davinci_common_init(&davinci_soc_info_dm646x); davinci_clk_init(dm646x_clks); davinci_mux_register(dm646x_pins, ARRAY_SIZE(dm646x_pins)); } diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h index 19177097625..770a1baa97d 100644 --- a/arch/arm/mach-davinci/include/mach/common.h +++ b/arch/arm/mach-davinci/include/mach/common.h @@ -17,7 +17,6 @@ struct sys_timer; extern struct sys_timer davinci_timer; extern void davinci_irq_init(void); -extern void davinci_map_common_io(void); /* parameters describe VBUS sourcing for host mode */ extern void setup_usb(unsigned mA, unsigned potpgt_msec); @@ -25,4 +24,15 @@ extern void setup_usb(unsigned mA, unsigned potpgt_msec); /* parameters describe VBUS sourcing for host mode */ extern void setup_usb(unsigned mA, unsigned potpgt_msec); +/* SoC specific init support */ +struct davinci_soc_info { + struct map_desc *io_desc; + unsigned long io_desc_num; +}; + +extern struct davinci_soc_info davinci_soc_info; + +extern void davinci_common_init(struct davinci_soc_info *soc_info); +extern void davinci_check_revision(void); + #endif /* __ARCH_ARM_MACH_DAVINCI_COMMON_H */ diff --git a/arch/arm/mach-davinci/include/mach/dm355.h b/arch/arm/mach-davinci/include/mach/dm355.h index f7100b65899..54903b72438 100644 --- a/arch/arm/mach-davinci/include/mach/dm355.h +++ b/arch/arm/mach-davinci/include/mach/dm355.h @@ -13,10 +13,9 @@ #include -void __init dm355_init(void); - struct spi_board_info; +void __init dm355_init(void); void dm355_init_spi0(unsigned chipselect_mask, struct spi_board_info *info, unsigned len); diff --git a/arch/arm/mach-davinci/io.c b/arch/arm/mach-davinci/io.c index a548abb513e..49912b48b1b 100644 --- a/arch/arm/mach-davinci/io.c +++ b/arch/arm/mach-davinci/io.c @@ -9,47 +9,9 @@ */ #include -#include -#include #include #include -#include - -#include -#include - -extern void davinci_check_revision(void); - -/* - * The machine specific code may provide the extra mapping besides the - * default mapping provided here. - */ -static struct map_desc davinci_io_desc[] __initdata = { - { - .virtual = IO_VIRT, - .pfn = __phys_to_pfn(IO_PHYS), - .length = IO_SIZE, - .type = MT_DEVICE - }, -}; - -void __init davinci_map_common_io(void) -{ - iotable_init(davinci_io_desc, ARRAY_SIZE(davinci_io_desc)); - - /* Normally devicemaps_init() would flush caches and tlb after - * mdesc->map_io(), but we must also do it here because of the CPU - * revision check below. - */ - local_flush_tlb_all(); - flush_cache_all(); - - /* We want to check CPU revision early for cpu_is_xxxx() macros. - * IO space mapping must be initialized before we can do that. - */ - davinci_check_revision(); -} #define BETWEEN(p, st, sz) ((p) >= (st) && (p) < ((st) + (sz))) #define XLATE(p, pst, vst) ((void __iomem *)((p) - (pst) + (vst))) -- cgit v1.2.3 From b9ab12797e74d93a3656ea0bf5591f8b3e094fd5 Mon Sep 17 00:00:00 2001 From: "Mark A. Greer" Date: Wed, 15 Apr 2009 12:39:09 -0700 Subject: davinci: Support JTAG ID register at any address The Davinci cpu_is_davinci_*() macros use the SoC part number and variant retrieved from the JTAG ID register to determine the type of cpu that the kernel is running on. Currently, the code to read the JTAG ID register assumes that the register is always at the same base address. This isn't true on some newer SoCs. To solve this, have the SoC-specific code set the JTAG ID register base address in soc_info structure and add a 'cpu_id' member to it. 'cpu_id' will be used by the cpu_is_davinci_*() macros to match the cpu id. Also move the info used to identify the cpu type into the SoC-specific code to keep all SoC-specific code together. The common code will read the JTAG ID register, search through an array of davinci_id structures to identify the cpu type. Once identified, it will set the 'cpu_id' member of the soc_info structure to the proper value and the cpu_is_davinci_*() macros will now work. Signed-off-by: Mark A. Greer Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/Makefile | 2 +- arch/arm/mach-davinci/common.c | 29 ++++++- arch/arm/mach-davinci/dm355.c | 14 ++++ arch/arm/mach-davinci/dm644x.c | 15 +++- arch/arm/mach-davinci/dm646x.c | 14 ++++ arch/arm/mach-davinci/id.c | 116 --------------------------- arch/arm/mach-davinci/include/mach/common.h | 6 +- arch/arm/mach-davinci/include/mach/cputype.h | 29 +++++-- 8 files changed, 97 insertions(+), 128 deletions(-) delete mode 100644 arch/arm/mach-davinci/id.c diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile index 74d25f69934..a65d03bb467 100644 --- a/arch/arm/mach-davinci/Makefile +++ b/arch/arm/mach-davinci/Makefile @@ -4,7 +4,7 @@ # # Common objects -obj-y := time.o irq.o clock.o serial.o io.o id.o psc.o \ +obj-y := time.o irq.o clock.o serial.o io.o psc.o \ gpio.o devices.o dma.o usb.o common.o obj-$(CONFIG_DAVINCI_MUX) += mux.o diff --git a/arch/arm/mach-davinci/common.c b/arch/arm/mach-davinci/common.c index 9a5486f5519..29b3a8d5121 100644 --- a/arch/arm/mach-davinci/common.c +++ b/arch/arm/mach-davinci/common.c @@ -15,13 +15,31 @@ #include #include +#include struct davinci_soc_info davinci_soc_info; EXPORT_SYMBOL(davinci_soc_info); +static struct davinci_id * __init davinci_get_id(u32 jtag_id) +{ + int i; + struct davinci_id *dip; + u8 variant = (jtag_id & 0xf0000000) >> 28; + u16 part_no = (jtag_id & 0x0ffff000) >> 12; + + for (i = 0, dip = davinci_soc_info.ids; i < davinci_soc_info.ids_num; + i++, dip++) + /* Don't care about the manufacturer right now */ + if ((dip->part_no == part_no) && (dip->variant == variant)) + return dip; + + return NULL; +} + void __init davinci_common_init(struct davinci_soc_info *soc_info) { int ret; + struct davinci_id *dip; if (!soc_info) { ret = -EINVAL; @@ -46,7 +64,16 @@ void __init davinci_common_init(struct davinci_soc_info *soc_info) * We want to check CPU revision early for cpu_is_xxxx() macros. * IO space mapping must be initialized before we can do that. */ - davinci_check_revision(); + davinci_soc_info.jtag_id = __raw_readl(davinci_soc_info.jtag_id_base); + + dip = davinci_get_id(davinci_soc_info.jtag_id); + if (!dip) { + ret = -EINVAL; + goto err; + } + + davinci_soc_info.cpu_id = dip->cpu_id; + pr_info("DaVinci %s variant 0x%x\n", dip->name, dip->variant); return; diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index 6d1abfdcfb7..0f724c06008 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -534,9 +534,23 @@ static struct map_desc dm355_io_desc[] = { }, }; +/* Contents of JTAG ID register used to identify exact cpu type */ +static struct davinci_id dm355_ids[] = { + { + .variant = 0x0, + .part_no = 0xb73b, + .manufacturer = 0x00f, + .cpu_id = DAVINCI_CPU_ID_DM355, + .name = "dm355", + }, +}; + static struct davinci_soc_info davinci_soc_info_dm355 = { .io_desc = dm355_io_desc, .io_desc_num = ARRAY_SIZE(dm355_io_desc), + .jtag_id_base = IO_ADDRESS(0x01c40028), + .ids = dm355_ids, + .ids_num = ARRAY_SIZE(dm355_ids), }; void __init dm355_init(void) diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index 79f113698b0..9bcd98c6820 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -388,7 +388,6 @@ MUX_CFG(DM644X, LOEEN, 0, 24, 1, 1, true) MUX_CFG(DM644X, LFLDEN, 0, 25, 1, 1, false) }; - /*----------------------------------------------------------------------*/ static const s8 dma_chan_dm644x_no_event[] = { @@ -475,9 +474,23 @@ static struct map_desc dm644x_io_desc[] = { }, }; +/* Contents of JTAG ID register used to identify exact cpu type */ +static struct davinci_id dm644x_ids[] = { + { + .variant = 0x0, + .part_no = 0xb700, + .manufacturer = 0x017, + .cpu_id = DAVINCI_CPU_ID_DM6446, + .name = "dm6446", + }, +}; + static struct davinci_soc_info davinci_soc_info_dm644x = { .io_desc = dm644x_io_desc, .io_desc_num = ARRAY_SIZE(dm644x_io_desc), + .jtag_id_base = IO_ADDRESS(0x01c40028), + .ids = dm644x_ids, + .ids_num = ARRAY_SIZE(dm644x_ids), }; void __init dm644x_init(void) diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index 8547ec02c9e..cd86bb78e0c 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -454,9 +454,23 @@ static struct map_desc dm646x_io_desc[] = { }, }; +/* Contents of JTAG ID register used to identify exact cpu type */ +static struct davinci_id dm646x_ids[] = { + { + .variant = 0x0, + .part_no = 0xb770, + .manufacturer = 0x017, + .cpu_id = DAVINCI_CPU_ID_DM6467, + .name = "dm6467", + }, +}; + static struct davinci_soc_info davinci_soc_info_dm646x = { .io_desc = dm646x_io_desc, .io_desc_num = ARRAY_SIZE(dm646x_io_desc), + .jtag_id_base = IO_ADDRESS(0x01c40028), + .ids = dm646x_ids, + .ids_num = ARRAY_SIZE(dm646x_ids), }; void __init dm646x_init(void) diff --git a/arch/arm/mach-davinci/id.c b/arch/arm/mach-davinci/id.c deleted file mode 100644 index 018b994cd79..00000000000 --- a/arch/arm/mach-davinci/id.c +++ /dev/null @@ -1,116 +0,0 @@ -/* - * Davinci CPU identification code - * - * Copyright (C) 2006 Komal Shah - * - * Derived from OMAP1 CPU identification code. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include -#include -#include -#include - -#define JTAG_ID_BASE IO_ADDRESS(0x01c40028) - -static unsigned int davinci_revision; - -struct davinci_id { - u8 variant; /* JTAG ID bits 31:28 */ - u16 part_no; /* JTAG ID bits 27:12 */ - u32 manufacturer; /* JTAG ID bits 11:1 */ - u32 type; /* Cpu id bits [31:8], cpu class bits [7:0] */ -}; - -/* Register values to detect the DaVinci version */ -static struct davinci_id davinci_ids[] __initdata = { - { - /* DM6446 */ - .part_no = 0xb700, - .variant = 0x0, - .manufacturer = 0x017, - .type = 0x64460000, - }, - { - /* DM646X */ - .part_no = 0xb770, - .variant = 0x0, - .manufacturer = 0x017, - .type = 0x64670000, - }, - { - /* DM355 */ - .part_no = 0xb73b, - .variant = 0x0, - .manufacturer = 0x00f, - .type = 0x03550000, - }, -}; - -/* - * Get Device Part No. from JTAG ID register - */ -static u16 __init davinci_get_part_no(void) -{ - u32 dev_id, part_no; - - dev_id = __raw_readl(JTAG_ID_BASE); - - part_no = ((dev_id >> 12) & 0xffff); - - return part_no; -} - -/* - * Get Device Revision from JTAG ID register - */ -static u8 __init davinci_get_variant(void) -{ - u32 variant; - - variant = __raw_readl(JTAG_ID_BASE); - - variant = (variant >> 28) & 0xf; - - return variant; -} - -unsigned int davinci_rev(void) -{ - return davinci_revision >> 16; -} -EXPORT_SYMBOL(davinci_rev); - -void __init davinci_check_revision(void) -{ - int i; - u16 part_no; - u8 variant; - - part_no = davinci_get_part_no(); - variant = davinci_get_variant(); - - /* First check only the major version in a safe way */ - for (i = 0; i < ARRAY_SIZE(davinci_ids); i++) { - if (part_no == (davinci_ids[i].part_no)) { - davinci_revision = davinci_ids[i].type; - break; - } - } - - /* Check if we can find the dev revision */ - for (i = 0; i < ARRAY_SIZE(davinci_ids); i++) { - if (part_no == davinci_ids[i].part_no && - variant == davinci_ids[i].variant) { - davinci_revision = davinci_ids[i].type; - break; - } - } - - printk(KERN_INFO "DaVinci DM%04x variant 0x%x\n", - davinci_rev(), variant); -} diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h index 770a1baa97d..ece1cd42738 100644 --- a/arch/arm/mach-davinci/include/mach/common.h +++ b/arch/arm/mach-davinci/include/mach/common.h @@ -28,11 +28,15 @@ extern void setup_usb(unsigned mA, unsigned potpgt_msec); struct davinci_soc_info { struct map_desc *io_desc; unsigned long io_desc_num; + u32 cpu_id; + u32 jtag_id; + void __iomem *jtag_id_base; + struct davinci_id *ids; + unsigned long ids_num; }; extern struct davinci_soc_info davinci_soc_info; extern void davinci_common_init(struct davinci_soc_info *soc_info); -extern void davinci_check_revision(void); #endif /* __ARCH_ARM_MACH_DAVINCI_COMMON_H */ diff --git a/arch/arm/mach-davinci/include/mach/cputype.h b/arch/arm/mach-davinci/include/mach/cputype.h index 27cfb1b3a66..d12a5ed2959 100644 --- a/arch/arm/mach-davinci/include/mach/cputype.h +++ b/arch/arm/mach-davinci/include/mach/cputype.h @@ -16,17 +16,30 @@ #ifndef _ASM_ARCH_CPU_H #define _ASM_ARCH_CPU_H -extern unsigned int davinci_rev(void); +#include -#define IS_DAVINCI_CPU(type, id) \ -static inline int is_davinci_dm ##type(void) \ -{ \ - return (davinci_rev() == (id)) ? 1 : 0; \ +struct davinci_id { + u8 variant; /* JTAG ID bits 31:28 */ + u16 part_no; /* JTAG ID bits 27:12 */ + u16 manufacturer; /* JTAG ID bits 11:1 */ + u32 cpu_id; + char *name; +}; + +/* Can use lower 16 bits of cpu id for a variant when required */ +#define DAVINCI_CPU_ID_DM6446 0x64460000 +#define DAVINCI_CPU_ID_DM6467 0x64670000 +#define DAVINCI_CPU_ID_DM355 0x03550000 + +#define IS_DAVINCI_CPU(type, id) \ +static inline int is_davinci_ ##type(void) \ +{ \ + return (davinci_soc_info.cpu_id == (id)); \ } -IS_DAVINCI_CPU(644x, 0x6446) -IS_DAVINCI_CPU(646x, 0x6467) -IS_DAVINCI_CPU(355, 0x355) +IS_DAVINCI_CPU(dm644x, DAVINCI_CPU_ID_DM6446) +IS_DAVINCI_CPU(dm646x, DAVINCI_CPU_ID_DM6467) +IS_DAVINCI_CPU(dm355, DAVINCI_CPU_ID_DM355) #ifdef CONFIG_ARCH_DAVINCI_DM644x #define cpu_is_davinci_dm644x() is_davinci_dm644x() -- cgit v1.2.3 From 66e0c3991c5a1735dd8add77ab8aff5005f57681 Mon Sep 17 00:00:00 2001 From: "Mark A. Greer" Date: Wed, 15 Apr 2009 12:39:23 -0700 Subject: davinci: Add clock init call to common init routine All of the davinci SoCs need to call davinci_clk_init() so put the call in the common init routine. Signed-off-by: Mark A. Greer Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/common.c | 9 +++++++++ arch/arm/mach-davinci/dm355.c | 2 +- arch/arm/mach-davinci/dm644x.c | 2 +- arch/arm/mach-davinci/dm646x.c | 2 +- arch/arm/mach-davinci/include/mach/common.h | 1 + 5 files changed, 13 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-davinci/common.c b/arch/arm/mach-davinci/common.c index 29b3a8d5121..2e5b888e6ca 100644 --- a/arch/arm/mach-davinci/common.c +++ b/arch/arm/mach-davinci/common.c @@ -17,6 +17,8 @@ #include #include +#include "clock.h" + struct davinci_soc_info davinci_soc_info; EXPORT_SYMBOL(davinci_soc_info); @@ -75,6 +77,13 @@ void __init davinci_common_init(struct davinci_soc_info *soc_info) davinci_soc_info.cpu_id = dip->cpu_id; pr_info("DaVinci %s variant 0x%x\n", dip->name, dip->variant); + if (davinci_soc_info.cpu_clks) { + ret = davinci_clk_init(davinci_soc_info.cpu_clks); + + if (ret != 0) + goto err; + } + return; err: diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index 0f724c06008..e93840a814e 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -551,12 +551,12 @@ static struct davinci_soc_info davinci_soc_info_dm355 = { .jtag_id_base = IO_ADDRESS(0x01c40028), .ids = dm355_ids, .ids_num = ARRAY_SIZE(dm355_ids), + .cpu_clks = dm355_clks, }; void __init dm355_init(void) { davinci_common_init(&davinci_soc_info_dm355); - davinci_clk_init(dm355_clks); davinci_mux_register(dm355_pins, ARRAY_SIZE(dm355_pins));; } diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index 9bcd98c6820..648160c2960 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -491,12 +491,12 @@ static struct davinci_soc_info davinci_soc_info_dm644x = { .jtag_id_base = IO_ADDRESS(0x01c40028), .ids = dm644x_ids, .ids_num = ARRAY_SIZE(dm644x_ids), + .cpu_clks = dm644x_clks, }; void __init dm644x_init(void) { davinci_common_init(&davinci_soc_info_dm644x); - davinci_clk_init(dm644x_clks); davinci_mux_register(dm644x_pins, ARRAY_SIZE(dm644x_pins)); } diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index cd86bb78e0c..7cf9705be9c 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -471,12 +471,12 @@ static struct davinci_soc_info davinci_soc_info_dm646x = { .jtag_id_base = IO_ADDRESS(0x01c40028), .ids = dm646x_ids, .ids_num = ARRAY_SIZE(dm646x_ids), + .cpu_clks = dm646x_clks, }; void __init dm646x_init(void) { davinci_common_init(&davinci_soc_info_dm646x); - davinci_clk_init(dm646x_clks); davinci_mux_register(dm646x_pins, ARRAY_SIZE(dm646x_pins)); } diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h index ece1cd42738..97782a76588 100644 --- a/arch/arm/mach-davinci/include/mach/common.h +++ b/arch/arm/mach-davinci/include/mach/common.h @@ -33,6 +33,7 @@ struct davinci_soc_info { void __iomem *jtag_id_base; struct davinci_id *ids; unsigned long ids_num; + struct davinci_clk *cpu_clks; }; extern struct davinci_soc_info davinci_soc_info; -- cgit v1.2.3 From d81d188cafecbc9e01df51527ac4c84a5b19e033 Mon Sep 17 00:00:00 2001 From: "Mark A. Greer" Date: Wed, 15 Apr 2009 12:39:33 -0700 Subject: davinci: Add support for multiple PSCs The current code to support the DaVinci Power and Sleep Controller (PSC) assumes that there is only one controller. This assumption is no longer valid so expand the support to allow greater than one PSC. To accomplish this, put the base addresses for the PSCs in the SoC infrastructure so it can be referenced by the PSC code. This also requires adding an extra parameter to davinci_psc_config() to specify the PSC that is to be enabled/disabled. Signed-off-by: Mark A. Greer Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/clock.c | 10 +++++---- arch/arm/mach-davinci/clock.h | 1 + arch/arm/mach-davinci/dm355.c | 6 ++++++ arch/arm/mach-davinci/dm644x.c | 6 ++++++ arch/arm/mach-davinci/dm646x.c | 6 ++++++ arch/arm/mach-davinci/include/mach/common.h | 2 ++ arch/arm/mach-davinci/include/mach/psc.h | 8 +++++--- arch/arm/mach-davinci/psc.c | 32 ++++++++++++++++++++++------- 8 files changed, 57 insertions(+), 14 deletions(-) diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c index f0baaa15a57..39bf321d70a 100644 --- a/arch/arm/mach-davinci/clock.c +++ b/arch/arm/mach-davinci/clock.c @@ -42,7 +42,8 @@ static void __clk_enable(struct clk *clk) if (clk->parent) __clk_enable(clk->parent); if (clk->usecount++ == 0 && (clk->flags & CLK_PSC)) - davinci_psc_config(psc_domain(clk), clk->lpsc, 1); + davinci_psc_config(psc_domain(clk), clk->psc_ctlr, + clk->lpsc, 1); } static void __clk_disable(struct clk *clk) @@ -50,7 +51,8 @@ static void __clk_disable(struct clk *clk) if (WARN_ON(clk->usecount == 0)) return; if (--clk->usecount == 0 && !(clk->flags & CLK_PLL)) - davinci_psc_config(psc_domain(clk), clk->lpsc, 0); + davinci_psc_config(psc_domain(clk), clk->psc_ctlr, + clk->lpsc, 0); if (clk->parent) __clk_disable(clk->parent); } @@ -164,11 +166,11 @@ static int __init clk_disable_unused(void) continue; /* ignore if in Disabled or SwRstDisable states */ - if (!davinci_psc_is_clk_active(ck->lpsc)) + if (!davinci_psc_is_clk_active(ck->psc_ctlr, ck->lpsc)) continue; pr_info("Clocks: disable unused %s\n", ck->name); - davinci_psc_config(psc_domain(ck), ck->lpsc, 0); + davinci_psc_config(psc_domain(ck), ck->psc_ctlr, ck->lpsc, 0); } spin_unlock_irq(&clockfw_lock); diff --git a/arch/arm/mach-davinci/clock.h b/arch/arm/mach-davinci/clock.h index 584494a3207..27233cb4a2f 100644 --- a/arch/arm/mach-davinci/clock.h +++ b/arch/arm/mach-davinci/clock.h @@ -67,6 +67,7 @@ struct clk { u8 usecount; u8 flags; u8 lpsc; + u8 psc_ctlr; struct clk *parent; struct pll_data *pll_data; u32 div_reg; diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index e93840a814e..37f20a7214b 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -545,6 +545,10 @@ static struct davinci_id dm355_ids[] = { }, }; +static void __iomem *dm355_psc_bases[] = { + IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE), +}; + static struct davinci_soc_info davinci_soc_info_dm355 = { .io_desc = dm355_io_desc, .io_desc_num = ARRAY_SIZE(dm355_io_desc), @@ -552,6 +556,8 @@ static struct davinci_soc_info davinci_soc_info_dm355 = { .ids = dm355_ids, .ids_num = ARRAY_SIZE(dm355_ids), .cpu_clks = dm355_clks, + .psc_bases = dm355_psc_bases, + .psc_bases_num = ARRAY_SIZE(dm355_psc_bases), }; void __init dm355_init(void) diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index 648160c2960..7b15faba56e 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -485,6 +485,10 @@ static struct davinci_id dm644x_ids[] = { }, }; +static void __iomem *dm644x_psc_bases[] = { + IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE), +}; + static struct davinci_soc_info davinci_soc_info_dm644x = { .io_desc = dm644x_io_desc, .io_desc_num = ARRAY_SIZE(dm644x_io_desc), @@ -492,6 +496,8 @@ static struct davinci_soc_info davinci_soc_info_dm644x = { .ids = dm644x_ids, .ids_num = ARRAY_SIZE(dm644x_ids), .cpu_clks = dm644x_clks, + .psc_bases = dm644x_psc_bases, + .psc_bases_num = ARRAY_SIZE(dm644x_psc_bases), }; void __init dm644x_init(void) diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index 7cf9705be9c..3c61543c7cf 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -465,6 +465,10 @@ static struct davinci_id dm646x_ids[] = { }, }; +static void __iomem *dm646x_psc_bases[] = { + IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE), +}; + static struct davinci_soc_info davinci_soc_info_dm646x = { .io_desc = dm646x_io_desc, .io_desc_num = ARRAY_SIZE(dm646x_io_desc), @@ -472,6 +476,8 @@ static struct davinci_soc_info davinci_soc_info_dm646x = { .ids = dm646x_ids, .ids_num = ARRAY_SIZE(dm646x_ids), .cpu_clks = dm646x_clks, + .psc_bases = dm646x_psc_bases, + .psc_bases_num = ARRAY_SIZE(dm646x_psc_bases), }; void __init dm646x_init(void) diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h index 97782a76588..7851d5680c1 100644 --- a/arch/arm/mach-davinci/include/mach/common.h +++ b/arch/arm/mach-davinci/include/mach/common.h @@ -34,6 +34,8 @@ struct davinci_soc_info { struct davinci_id *ids; unsigned long ids_num; struct davinci_clk *cpu_clks; + void __iomem **psc_bases; + unsigned long psc_bases_num; }; extern struct davinci_soc_info davinci_soc_info; diff --git a/arch/arm/mach-davinci/include/mach/psc.h b/arch/arm/mach-davinci/include/mach/psc.h index 55a90d419fa..ab8a2586d1c 100644 --- a/arch/arm/mach-davinci/include/mach/psc.h +++ b/arch/arm/mach-davinci/include/mach/psc.h @@ -27,6 +27,8 @@ #ifndef __ASM_ARCH_PSC_H #define __ASM_ARCH_PSC_H +#define DAVINCI_PWR_SLEEP_CNTRL_BASE 0x01C41000 + /* Power and Sleep Controller (PSC) Domains */ #define DAVINCI_GPSC_ARMDOMAIN 0 #define DAVINCI_GPSC_DSPDOMAIN 1 @@ -116,8 +118,8 @@ #define DM646X_LPSC_TIMER1 35 #define DM646X_LPSC_ARM_INTC 45 -extern int davinci_psc_is_clk_active(unsigned int id); -extern void davinci_psc_config(unsigned int domain, unsigned int id, - char enable); +extern int davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id); +extern void davinci_psc_config(unsigned int domain, unsigned int ctlr, + unsigned int id, char enable); #endif /* __ASM_ARCH_PSC_H */ diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c index 84171abf5f7..a78b657e916 100644 --- a/arch/arm/mach-davinci/psc.c +++ b/arch/arm/mach-davinci/psc.c @@ -28,8 +28,6 @@ #include #include -#define DAVINCI_PWR_SLEEP_CNTRL_BASE 0x01C41000 - /* PSC register offsets */ #define EPCPR 0x070 #define PTCMD 0x120 @@ -42,22 +40,42 @@ #define MDSTAT_STATE_MASK 0x1f /* Return nonzero iff the domain's clock is active */ -int __init davinci_psc_is_clk_active(unsigned int id) +int __init davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id) { - void __iomem *psc_base = IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE); - u32 mdstat = __raw_readl(psc_base + MDSTAT + 4 * id); + void __iomem *psc_base; + u32 mdstat; + struct davinci_soc_info *soc_info = &davinci_soc_info; + + if (!soc_info->psc_bases || (ctlr >= soc_info->psc_bases_num)) { + pr_warning("PSC: Bad psc data: 0x%x[%d]\n", + (int)soc_info->psc_bases, ctlr); + return 0; + } + + psc_base = soc_info->psc_bases[ctlr]; + mdstat = __raw_readl(psc_base + MDSTAT + 4 * id); /* if clocked, state can be "Enable" or "SyncReset" */ return mdstat & BIT(12); } /* Enable or disable a PSC domain */ -void davinci_psc_config(unsigned int domain, unsigned int id, char enable) +void davinci_psc_config(unsigned int domain, unsigned int ctlr, + unsigned int id, char enable) { u32 epcpr, ptcmd, ptstat, pdstat, pdctl1, mdstat, mdctl; - void __iomem *psc_base = IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE); + void __iomem *psc_base; + struct davinci_soc_info *soc_info = &davinci_soc_info; u32 next_state = enable ? 0x3 : 0x2; /* 0x3 enables, 0x2 disables */ + if (!soc_info->psc_bases || (ctlr >= soc_info->psc_bases_num)) { + pr_warning("PSC: Bad psc data: 0x%x[%d]\n", + (int)soc_info->psc_bases, ctlr); + return; + } + + psc_base = soc_info->psc_bases[ctlr]; + mdctl = __raw_readl(psc_base + MDCTL + 4 * id); mdctl &= ~MDSTAT_STATE_MASK; mdctl |= next_state; -- cgit v1.2.3 From 0e585952ac6a06b3c77d6b8eadb9c359766a700d Mon Sep 17 00:00:00 2001 From: "Mark A. Greer" Date: Wed, 15 Apr 2009 12:39:48 -0700 Subject: davinci: Move pinmux setup info to SoC infrastructure The pinmux register base and setup can be different for different SoCs so move the pinmux reg base, pinmux table (and its size) to the SoC infrastructure. Signed-off-by: Mark A. Greer Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/dm355.c | 6 +++++- arch/arm/mach-davinci/dm644x.c | 6 +++++- arch/arm/mach-davinci/dm646x.c | 6 +++++- arch/arm/mach-davinci/include/mach/common.h | 3 +++ arch/arm/mach-davinci/include/mach/mux.h | 6 ------ arch/arm/mach-davinci/mux.c | 24 +++++++----------------- 6 files changed, 25 insertions(+), 26 deletions(-) diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index 37f20a7214b..f735ed9d2d1 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -436,6 +436,7 @@ void __init dm355_init_spi0(unsigned chipselect_mask, * reg offset mask mode */ static const struct mux_config dm355_pins[] = { +#ifdef CONFIG_DAVINCI_MUX MUX_CFG(DM355, MMCSD0, 4, 2, 1, 0, false) MUX_CFG(DM355, SD1_CLK, 3, 6, 1, 1, false) @@ -466,6 +467,7 @@ INT_CFG(DM355, INT_EDMA_TC1_ERR, 4, 1, 1, false) EVT_CFG(DM355, EVT8_ASP1_TX, 0, 1, 0, false) EVT_CFG(DM355, EVT9_ASP1_RX, 1, 1, 0, false) EVT_CFG(DM355, EVT26_MMC0_RX, 2, 1, 0, false) +#endif }; /*----------------------------------------------------------------------*/ @@ -558,12 +560,14 @@ static struct davinci_soc_info davinci_soc_info_dm355 = { .cpu_clks = dm355_clks, .psc_bases = dm355_psc_bases, .psc_bases_num = ARRAY_SIZE(dm355_psc_bases), + .pinmux_base = IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE), + .pinmux_pins = dm355_pins, + .pinmux_pins_num = ARRAY_SIZE(dm355_pins), }; void __init dm355_init(void) { davinci_common_init(&davinci_soc_info_dm355); - davinci_mux_register(dm355_pins, ARRAY_SIZE(dm355_pins));; } static int __init dm355_init_devices(void) diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index 7b15faba56e..b7c17dd6795 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -346,6 +346,7 @@ static struct platform_device dm644x_emac_device = { * reg offset mask mode */ static const struct mux_config dm644x_pins[] = { +#ifdef CONFIG_DAVINCI_MUX MUX_CFG(DM644X, HDIREN, 0, 16, 1, 1, true) MUX_CFG(DM644X, ATAEN, 0, 17, 1, 1, true) MUX_CFG(DM644X, ATAEN_DISABLE, 0, 17, 1, 0, true) @@ -386,6 +387,7 @@ MUX_CFG(DM644X, RGB666, 0, 22, 1, 1, true) MUX_CFG(DM644X, LOEEN, 0, 24, 1, 1, true) MUX_CFG(DM644X, LFLDEN, 0, 25, 1, 1, false) +#endif }; /*----------------------------------------------------------------------*/ @@ -498,12 +500,14 @@ static struct davinci_soc_info davinci_soc_info_dm644x = { .cpu_clks = dm644x_clks, .psc_bases = dm644x_psc_bases, .psc_bases_num = ARRAY_SIZE(dm644x_psc_bases), + .pinmux_base = IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE), + .pinmux_pins = dm644x_pins, + .pinmux_pins_num = ARRAY_SIZE(dm644x_pins), }; void __init dm644x_init(void) { davinci_common_init(&davinci_soc_info_dm644x); - davinci_mux_register(dm644x_pins, ARRAY_SIZE(dm644x_pins)); } static int __init dm644x_init_devices(void) diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index 3c61543c7cf..299d8d9d26e 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -327,6 +327,7 @@ static struct platform_device dm646x_emac_device = { * reg offset mask mode */ static const struct mux_config dm646x_pins[] = { +#ifdef CONFIG_DAVINCI_MUX MUX_CFG(DM646X, ATAEN, 0, 0, 1, 1, true) MUX_CFG(DM646X, AUDCK1, 0, 29, 1, 0, false) @@ -354,6 +355,7 @@ MUX_CFG(DM646X, PTSIMUX_PARALLEL, 0, 16, 3, 2, true) MUX_CFG(DM646X, PTSOMUX_SERIAL, 0, 18, 3, 3, true) MUX_CFG(DM646X, PTSIMUX_SERIAL, 0, 16, 3, 3, true) +#endif }; /*----------------------------------------------------------------------*/ @@ -478,12 +480,14 @@ static struct davinci_soc_info davinci_soc_info_dm646x = { .cpu_clks = dm646x_clks, .psc_bases = dm646x_psc_bases, .psc_bases_num = ARRAY_SIZE(dm646x_psc_bases), + .pinmux_base = IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE), + .pinmux_pins = dm646x_pins, + .pinmux_pins_num = ARRAY_SIZE(dm646x_pins), }; void __init dm646x_init(void) { davinci_common_init(&davinci_soc_info_dm646x); - davinci_mux_register(dm646x_pins, ARRAY_SIZE(dm646x_pins)); } static int __init dm646x_init_devices(void) diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h index 7851d5680c1..c00d375946d 100644 --- a/arch/arm/mach-davinci/include/mach/common.h +++ b/arch/arm/mach-davinci/include/mach/common.h @@ -36,6 +36,9 @@ struct davinci_soc_info { struct davinci_clk *cpu_clks; void __iomem **psc_bases; unsigned long psc_bases_num; + void __iomem *pinmux_base; + const struct mux_config *pinmux_pins; + unsigned long pinmux_pins_num; }; extern struct davinci_soc_info davinci_soc_info; diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h index bae22cb3e27..5d6efa80af6 100644 --- a/arch/arm/mach-davinci/include/mach/mux.h +++ b/arch/arm/mach-davinci/include/mach/mux.h @@ -168,15 +168,9 @@ enum davinci_dm355_index { #ifdef CONFIG_DAVINCI_MUX /* setup pin muxing */ -extern void davinci_mux_init(void); -extern int davinci_mux_register(const struct mux_config *pins, - unsigned long size); extern int davinci_cfg_reg(unsigned long reg_cfg); #else /* boot loader does it all (no warnings from CONFIG_DAVINCI_MUX_WARNINGS) */ -static inline void davinci_mux_init(void) {} -static inline int davinci_mux_register(const struct mux_config *pins, - unsigned long size) { return 0; } static inline int davinci_cfg_reg(unsigned long reg_cfg) { return 0; } #endif diff --git a/arch/arm/mach-davinci/mux.c b/arch/arm/mach-davinci/mux.c index bbba0b247a4..d310f579aa8 100644 --- a/arch/arm/mach-davinci/mux.c +++ b/arch/arm/mach-davinci/mux.c @@ -21,18 +21,7 @@ #include #include - -static const struct mux_config *mux_table; -static unsigned long pin_table_sz; - -int __init davinci_mux_register(const struct mux_config *pins, - unsigned long size) -{ - mux_table = pins; - pin_table_sz = size; - - return 0; -} +#include /* * Sets the DAVINCI MUX register based on the table @@ -40,23 +29,24 @@ int __init davinci_mux_register(const struct mux_config *pins, int __init_or_module davinci_cfg_reg(const unsigned long index) { static DEFINE_SPINLOCK(mux_spin_lock); - void __iomem *base = IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE); + struct davinci_soc_info *soc_info = &davinci_soc_info; + void __iomem *base = soc_info->pinmux_base; unsigned long flags; const struct mux_config *cfg; unsigned int reg_orig = 0, reg = 0; unsigned int mask, warn = 0; - if (!mux_table) + if (!soc_info->pinmux_pins) BUG(); - if (index >= pin_table_sz) { + if (index >= soc_info->pinmux_pins_num) { printk(KERN_ERR "Invalid pin mux index: %lu (%lu)\n", - index, pin_table_sz); + index, soc_info->pinmux_pins_num); dump_stack(); return -ENODEV; } - cfg = &mux_table[index]; + cfg = &soc_info->pinmux_pins[index]; if (cfg->name == NULL) { printk(KERN_ERR "No entry for the specified index\n"); -- cgit v1.2.3 From 673dd36f0d0cf8893d6b46d524ad80e81076b885 Mon Sep 17 00:00:00 2001 From: "Mark A. Greer" Date: Wed, 15 Apr 2009 12:40:00 -0700 Subject: davinci: Move interrupt ctlr info to SoC infrastructure Use the SoC infrastructure to hold the interrupt controller information (i.e., base address, default priorities, interrupt controller type, and the number of IRQs). The interrupt controller base, although initially put in the soc_info structure's intc_base field, is eventually put in the global 'davinci_intc_base' so the low-level interrupt code can access it without a dereference. These changes enable the SoC default irq priorities to be put in the SoC-specific files, and the interrupt controller to be at any base address. Signed-off-by: Mark A. Greer Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/common.c | 3 + arch/arm/mach-davinci/dm355.c | 69 +++++++ arch/arm/mach-davinci/dm644x.c | 72 ++++++++ arch/arm/mach-davinci/dm646x.c | 71 ++++++++ arch/arm/mach-davinci/include/mach/common.h | 5 + arch/arm/mach-davinci/include/mach/entry-macro.S | 3 +- arch/arm/mach-davinci/include/mach/irqs.h | 3 + arch/arm/mach-davinci/irq.c | 217 +---------------------- 8 files changed, 229 insertions(+), 214 deletions(-) diff --git a/arch/arm/mach-davinci/common.c b/arch/arm/mach-davinci/common.c index 2e5b888e6ca..d72d517d090 100644 --- a/arch/arm/mach-davinci/common.c +++ b/arch/arm/mach-davinci/common.c @@ -22,6 +22,8 @@ struct davinci_soc_info davinci_soc_info; EXPORT_SYMBOL(davinci_soc_info); +void __iomem *davinci_intc_base; + static struct davinci_id * __init davinci_get_id(u32 jtag_id) { int i; @@ -84,6 +86,7 @@ void __init davinci_common_init(struct davinci_soc_info *soc_info) goto err; } + davinci_intc_base = davinci_soc_info.intc_base; return; err: diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index f735ed9d2d1..e8c01ffe818 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -470,6 +470,71 @@ EVT_CFG(DM355, EVT26_MMC0_RX, 2, 1, 0, false) #endif }; +static u8 dm355_default_priorities[DAVINCI_N_AINTC_IRQ] = { + [IRQ_DM355_CCDC_VDINT0] = 2, + [IRQ_DM355_CCDC_VDINT1] = 6, + [IRQ_DM355_CCDC_VDINT2] = 6, + [IRQ_DM355_IPIPE_HST] = 6, + [IRQ_DM355_H3AINT] = 6, + [IRQ_DM355_IPIPE_SDR] = 6, + [IRQ_DM355_IPIPEIFINT] = 6, + [IRQ_DM355_OSDINT] = 7, + [IRQ_DM355_VENCINT] = 6, + [IRQ_ASQINT] = 6, + [IRQ_IMXINT] = 6, + [IRQ_USBINT] = 4, + [IRQ_DM355_RTOINT] = 4, + [IRQ_DM355_UARTINT2] = 7, + [IRQ_DM355_TINT6] = 7, + [IRQ_CCINT0] = 5, /* dma */ + [IRQ_CCERRINT] = 5, /* dma */ + [IRQ_TCERRINT0] = 5, /* dma */ + [IRQ_TCERRINT] = 5, /* dma */ + [IRQ_DM355_SPINT2_1] = 7, + [IRQ_DM355_TINT7] = 4, + [IRQ_DM355_SDIOINT0] = 7, + [IRQ_MBXINT] = 7, + [IRQ_MBRINT] = 7, + [IRQ_MMCINT] = 7, + [IRQ_DM355_MMCINT1] = 7, + [IRQ_DM355_PWMINT3] = 7, + [IRQ_DDRINT] = 7, + [IRQ_AEMIFINT] = 7, + [IRQ_DM355_SDIOINT1] = 4, + [IRQ_TINT0_TINT12] = 2, /* clockevent */ + [IRQ_TINT0_TINT34] = 2, /* clocksource */ + [IRQ_TINT1_TINT12] = 7, /* DSP timer */ + [IRQ_TINT1_TINT34] = 7, /* system tick */ + [IRQ_PWMINT0] = 7, + [IRQ_PWMINT1] = 7, + [IRQ_PWMINT2] = 7, + [IRQ_I2C] = 3, + [IRQ_UARTINT0] = 3, + [IRQ_UARTINT1] = 3, + [IRQ_DM355_SPINT0_0] = 3, + [IRQ_DM355_SPINT0_1] = 3, + [IRQ_DM355_GPIO0] = 3, + [IRQ_DM355_GPIO1] = 7, + [IRQ_DM355_GPIO2] = 4, + [IRQ_DM355_GPIO3] = 4, + [IRQ_DM355_GPIO4] = 7, + [IRQ_DM355_GPIO5] = 7, + [IRQ_DM355_GPIO6] = 7, + [IRQ_DM355_GPIO7] = 7, + [IRQ_DM355_GPIO8] = 7, + [IRQ_DM355_GPIO9] = 7, + [IRQ_DM355_GPIOBNK0] = 7, + [IRQ_DM355_GPIOBNK1] = 7, + [IRQ_DM355_GPIOBNK2] = 7, + [IRQ_DM355_GPIOBNK3] = 7, + [IRQ_DM355_GPIOBNK4] = 7, + [IRQ_DM355_GPIOBNK5] = 7, + [IRQ_DM355_GPIOBNK6] = 7, + [IRQ_COMMTX] = 7, + [IRQ_COMMRX] = 7, + [IRQ_EMUINT] = 7, +}; + /*----------------------------------------------------------------------*/ static const s8 dma_chan_dm355_no_event[] = { @@ -563,6 +628,10 @@ static struct davinci_soc_info davinci_soc_info_dm355 = { .pinmux_base = IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE), .pinmux_pins = dm355_pins, .pinmux_pins_num = ARRAY_SIZE(dm355_pins), + .intc_base = IO_ADDRESS(DAVINCI_ARM_INTC_BASE), + .intc_type = DAVINCI_INTC_TYPE_AINTC, + .intc_irq_prios = dm355_default_priorities, + .intc_irq_num = DAVINCI_N_AINTC_IRQ, }; void __init dm355_init(void) diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index b7c17dd6795..5c6a7b17578 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -390,6 +390,74 @@ MUX_CFG(DM644X, LFLDEN, 0, 25, 1, 1, false) #endif }; +/* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */ +static u8 dm644x_default_priorities[DAVINCI_N_AINTC_IRQ] = { + [IRQ_VDINT0] = 2, + [IRQ_VDINT1] = 6, + [IRQ_VDINT2] = 6, + [IRQ_HISTINT] = 6, + [IRQ_H3AINT] = 6, + [IRQ_PRVUINT] = 6, + [IRQ_RSZINT] = 6, + [7] = 7, + [IRQ_VENCINT] = 6, + [IRQ_ASQINT] = 6, + [IRQ_IMXINT] = 6, + [IRQ_VLCDINT] = 6, + [IRQ_USBINT] = 4, + [IRQ_EMACINT] = 4, + [14] = 7, + [15] = 7, + [IRQ_CCINT0] = 5, /* dma */ + [IRQ_CCERRINT] = 5, /* dma */ + [IRQ_TCERRINT0] = 5, /* dma */ + [IRQ_TCERRINT] = 5, /* dma */ + [IRQ_PSCIN] = 7, + [21] = 7, + [IRQ_IDE] = 4, + [23] = 7, + [IRQ_MBXINT] = 7, + [IRQ_MBRINT] = 7, + [IRQ_MMCINT] = 7, + [IRQ_SDIOINT] = 7, + [28] = 7, + [IRQ_DDRINT] = 7, + [IRQ_AEMIFINT] = 7, + [IRQ_VLQINT] = 4, + [IRQ_TINT0_TINT12] = 2, /* clockevent */ + [IRQ_TINT0_TINT34] = 2, /* clocksource */ + [IRQ_TINT1_TINT12] = 7, /* DSP timer */ + [IRQ_TINT1_TINT34] = 7, /* system tick */ + [IRQ_PWMINT0] = 7, + [IRQ_PWMINT1] = 7, + [IRQ_PWMINT2] = 7, + [IRQ_I2C] = 3, + [IRQ_UARTINT0] = 3, + [IRQ_UARTINT1] = 3, + [IRQ_UARTINT2] = 3, + [IRQ_SPINT0] = 3, + [IRQ_SPINT1] = 3, + [45] = 7, + [IRQ_DSP2ARM0] = 4, + [IRQ_DSP2ARM1] = 4, + [IRQ_GPIO0] = 7, + [IRQ_GPIO1] = 7, + [IRQ_GPIO2] = 7, + [IRQ_GPIO3] = 7, + [IRQ_GPIO4] = 7, + [IRQ_GPIO5] = 7, + [IRQ_GPIO6] = 7, + [IRQ_GPIO7] = 7, + [IRQ_GPIOBNK0] = 7, + [IRQ_GPIOBNK1] = 7, + [IRQ_GPIOBNK2] = 7, + [IRQ_GPIOBNK3] = 7, + [IRQ_GPIOBNK4] = 7, + [IRQ_COMMTX] = 7, + [IRQ_COMMRX] = 7, + [IRQ_EMUINT] = 7, +}; + /*----------------------------------------------------------------------*/ static const s8 dma_chan_dm644x_no_event[] = { @@ -503,6 +571,10 @@ static struct davinci_soc_info davinci_soc_info_dm644x = { .pinmux_base = IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE), .pinmux_pins = dm644x_pins, .pinmux_pins_num = ARRAY_SIZE(dm644x_pins), + .intc_base = IO_ADDRESS(DAVINCI_ARM_INTC_BASE), + .intc_type = DAVINCI_INTC_TYPE_AINTC, + .intc_irq_prios = dm644x_default_priorities, + .intc_irq_num = DAVINCI_N_AINTC_IRQ, }; void __init dm644x_init(void) diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index 299d8d9d26e..beb522e8a1a 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -358,6 +358,73 @@ MUX_CFG(DM646X, PTSIMUX_SERIAL, 0, 16, 3, 3, true) #endif }; +static u8 dm646x_default_priorities[DAVINCI_N_AINTC_IRQ] = { + [IRQ_DM646X_VP_VERTINT0] = 7, + [IRQ_DM646X_VP_VERTINT1] = 7, + [IRQ_DM646X_VP_VERTINT2] = 7, + [IRQ_DM646X_VP_VERTINT3] = 7, + [IRQ_DM646X_VP_ERRINT] = 7, + [IRQ_DM646X_RESERVED_1] = 7, + [IRQ_DM646X_RESERVED_2] = 7, + [IRQ_DM646X_WDINT] = 7, + [IRQ_DM646X_CRGENINT0] = 7, + [IRQ_DM646X_CRGENINT1] = 7, + [IRQ_DM646X_TSIFINT0] = 7, + [IRQ_DM646X_TSIFINT1] = 7, + [IRQ_DM646X_VDCEINT] = 7, + [IRQ_DM646X_USBINT] = 7, + [IRQ_DM646X_USBDMAINT] = 7, + [IRQ_DM646X_PCIINT] = 7, + [IRQ_CCINT0] = 7, /* dma */ + [IRQ_CCERRINT] = 7, /* dma */ + [IRQ_TCERRINT0] = 7, /* dma */ + [IRQ_TCERRINT] = 7, /* dma */ + [IRQ_DM646X_TCERRINT2] = 7, + [IRQ_DM646X_TCERRINT3] = 7, + [IRQ_DM646X_IDE] = 7, + [IRQ_DM646X_HPIINT] = 7, + [IRQ_DM646X_EMACRXTHINT] = 7, + [IRQ_DM646X_EMACRXINT] = 7, + [IRQ_DM646X_EMACTXINT] = 7, + [IRQ_DM646X_EMACMISCINT] = 7, + [IRQ_DM646X_MCASP0TXINT] = 7, + [IRQ_DM646X_MCASP0RXINT] = 7, + [IRQ_AEMIFINT] = 7, + [IRQ_DM646X_RESERVED_3] = 7, + [IRQ_DM646X_MCASP1TXINT] = 7, /* clockevent */ + [IRQ_TINT0_TINT34] = 7, /* clocksource */ + [IRQ_TINT1_TINT12] = 7, /* DSP timer */ + [IRQ_TINT1_TINT34] = 7, /* system tick */ + [IRQ_PWMINT0] = 7, + [IRQ_PWMINT1] = 7, + [IRQ_DM646X_VLQINT] = 7, + [IRQ_I2C] = 7, + [IRQ_UARTINT0] = 7, + [IRQ_UARTINT1] = 7, + [IRQ_DM646X_UARTINT2] = 7, + [IRQ_DM646X_SPINT0] = 7, + [IRQ_DM646X_SPINT1] = 7, + [IRQ_DM646X_DSP2ARMINT] = 7, + [IRQ_DM646X_RESERVED_4] = 7, + [IRQ_DM646X_PSCINT] = 7, + [IRQ_DM646X_GPIO0] = 7, + [IRQ_DM646X_GPIO1] = 7, + [IRQ_DM646X_GPIO2] = 7, + [IRQ_DM646X_GPIO3] = 7, + [IRQ_DM646X_GPIO4] = 7, + [IRQ_DM646X_GPIO5] = 7, + [IRQ_DM646X_GPIO6] = 7, + [IRQ_DM646X_GPIO7] = 7, + [IRQ_DM646X_GPIOBNK0] = 7, + [IRQ_DM646X_GPIOBNK1] = 7, + [IRQ_DM646X_GPIOBNK2] = 7, + [IRQ_DM646X_DDRINT] = 7, + [IRQ_DM646X_AEMIFINT] = 7, + [IRQ_COMMTX] = 7, + [IRQ_COMMRX] = 7, + [IRQ_EMUINT] = 7, +}; + /*----------------------------------------------------------------------*/ static const s8 dma_chan_dm646x_no_event[] = { @@ -483,6 +550,10 @@ static struct davinci_soc_info davinci_soc_info_dm646x = { .pinmux_base = IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE), .pinmux_pins = dm646x_pins, .pinmux_pins_num = ARRAY_SIZE(dm646x_pins), + .intc_base = IO_ADDRESS(DAVINCI_ARM_INTC_BASE), + .intc_type = DAVINCI_INTC_TYPE_AINTC, + .intc_irq_prios = dm646x_default_priorities, + .intc_irq_num = DAVINCI_N_AINTC_IRQ, }; void __init dm646x_init(void) diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h index c00d375946d..838ae13595a 100644 --- a/arch/arm/mach-davinci/include/mach/common.h +++ b/arch/arm/mach-davinci/include/mach/common.h @@ -17,6 +17,7 @@ struct sys_timer; extern struct sys_timer davinci_timer; extern void davinci_irq_init(void); +extern void __iomem *davinci_intc_base; /* parameters describe VBUS sourcing for host mode */ extern void setup_usb(unsigned mA, unsigned potpgt_msec); @@ -39,6 +40,10 @@ struct davinci_soc_info { void __iomem *pinmux_base; const struct mux_config *pinmux_pins; unsigned long pinmux_pins_num; + void __iomem *intc_base; + int intc_type; + u8 *intc_irq_prios; + unsigned long intc_irq_num; }; extern struct davinci_soc_info davinci_soc_info; diff --git a/arch/arm/mach-davinci/include/mach/entry-macro.S b/arch/arm/mach-davinci/include/mach/entry-macro.S index 0ebb4454505..ed78851fe4a 100644 --- a/arch/arm/mach-davinci/include/mach/entry-macro.S +++ b/arch/arm/mach-davinci/include/mach/entry-macro.S @@ -15,7 +15,8 @@ .endm .macro get_irqnr_preamble, base, tmp - ldr \base, =IO_ADDRESS(DAVINCI_ARM_INTC_BASE) + ldr \base, =davinci_intc_base + ldr \base, [\base] .endm .macro arch_ret_to_user, tmp1, tmp2 diff --git a/arch/arm/mach-davinci/include/mach/irqs.h b/arch/arm/mach-davinci/include/mach/irqs.h index 18066074c99..bc5d6aaa69a 100644 --- a/arch/arm/mach-davinci/include/mach/irqs.h +++ b/arch/arm/mach-davinci/include/mach/irqs.h @@ -30,6 +30,9 @@ /* Base address */ #define DAVINCI_ARM_INTC_BASE 0x01C48000 +#define DAVINCI_INTC_TYPE_AINTC 0 +#define DAVINCI_INTC_TYPE_CP_INTC 1 + /* Interrupt lines */ #define IRQ_VDINT0 0 #define IRQ_VDINT1 1 diff --git a/arch/arm/mach-davinci/irq.c b/arch/arm/mach-davinci/irq.c index 5a324c90e29..af92ffee847 100644 --- a/arch/arm/mach-davinci/irq.c +++ b/arch/arm/mach-davinci/irq.c @@ -26,6 +26,7 @@ #include #include +#include #include #define IRQ_BIT(irq) ((irq) & 0x1f) @@ -41,18 +42,14 @@ #define IRQ_INTPRI0_REG_OFFSET 0x0030 #define IRQ_INTPRI7_REG_OFFSET 0x004C -const u8 *davinci_def_priorities; - -#define INTC_BASE IO_ADDRESS(DAVINCI_ARM_INTC_BASE) - static inline unsigned int davinci_irq_readl(int offset) { - return __raw_readl(INTC_BASE + offset); + return __raw_readl(davinci_intc_base + offset); } static inline void davinci_irq_writel(unsigned long value, int offset) { - __raw_writel(value, INTC_BASE + offset); + __raw_writel(value, davinci_intc_base + offset); } /* Disable interrupt */ @@ -113,217 +110,11 @@ static struct irq_chip davinci_irq_chip_0 = { .unmask = davinci_unmask_irq, }; -/* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */ -static const u8 dm644x_default_priorities[DAVINCI_N_AINTC_IRQ] __initdata = { - [IRQ_VDINT0] = 2, - [IRQ_VDINT1] = 6, - [IRQ_VDINT2] = 6, - [IRQ_HISTINT] = 6, - [IRQ_H3AINT] = 6, - [IRQ_PRVUINT] = 6, - [IRQ_RSZINT] = 6, - [7] = 7, - [IRQ_VENCINT] = 6, - [IRQ_ASQINT] = 6, - [IRQ_IMXINT] = 6, - [IRQ_VLCDINT] = 6, - [IRQ_USBINT] = 4, - [IRQ_EMACINT] = 4, - [14] = 7, - [15] = 7, - [IRQ_CCINT0] = 5, /* dma */ - [IRQ_CCERRINT] = 5, /* dma */ - [IRQ_TCERRINT0] = 5, /* dma */ - [IRQ_TCERRINT] = 5, /* dma */ - [IRQ_PSCIN] = 7, - [21] = 7, - [IRQ_IDE] = 4, - [23] = 7, - [IRQ_MBXINT] = 7, - [IRQ_MBRINT] = 7, - [IRQ_MMCINT] = 7, - [IRQ_SDIOINT] = 7, - [28] = 7, - [IRQ_DDRINT] = 7, - [IRQ_AEMIFINT] = 7, - [IRQ_VLQINT] = 4, - [IRQ_TINT0_TINT12] = 2, /* clockevent */ - [IRQ_TINT0_TINT34] = 2, /* clocksource */ - [IRQ_TINT1_TINT12] = 7, /* DSP timer */ - [IRQ_TINT1_TINT34] = 7, /* system tick */ - [IRQ_PWMINT0] = 7, - [IRQ_PWMINT1] = 7, - [IRQ_PWMINT2] = 7, - [IRQ_I2C] = 3, - [IRQ_UARTINT0] = 3, - [IRQ_UARTINT1] = 3, - [IRQ_UARTINT2] = 3, - [IRQ_SPINT0] = 3, - [IRQ_SPINT1] = 3, - [45] = 7, - [IRQ_DSP2ARM0] = 4, - [IRQ_DSP2ARM1] = 4, - [IRQ_GPIO0] = 7, - [IRQ_GPIO1] = 7, - [IRQ_GPIO2] = 7, - [IRQ_GPIO3] = 7, - [IRQ_GPIO4] = 7, - [IRQ_GPIO5] = 7, - [IRQ_GPIO6] = 7, - [IRQ_GPIO7] = 7, - [IRQ_GPIOBNK0] = 7, - [IRQ_GPIOBNK1] = 7, - [IRQ_GPIOBNK2] = 7, - [IRQ_GPIOBNK3] = 7, - [IRQ_GPIOBNK4] = 7, - [IRQ_COMMTX] = 7, - [IRQ_COMMRX] = 7, - [IRQ_EMUINT] = 7, -}; - -static const u8 dm646x_default_priorities[DAVINCI_N_AINTC_IRQ] = { - [IRQ_DM646X_VP_VERTINT0] = 7, - [IRQ_DM646X_VP_VERTINT1] = 7, - [IRQ_DM646X_VP_VERTINT2] = 7, - [IRQ_DM646X_VP_VERTINT3] = 7, - [IRQ_DM646X_VP_ERRINT] = 7, - [IRQ_DM646X_RESERVED_1] = 7, - [IRQ_DM646X_RESERVED_2] = 7, - [IRQ_DM646X_WDINT] = 7, - [IRQ_DM646X_CRGENINT0] = 7, - [IRQ_DM646X_CRGENINT1] = 7, - [IRQ_DM646X_TSIFINT0] = 7, - [IRQ_DM646X_TSIFINT1] = 7, - [IRQ_DM646X_VDCEINT] = 7, - [IRQ_DM646X_USBINT] = 7, - [IRQ_DM646X_USBDMAINT] = 7, - [IRQ_DM646X_PCIINT] = 7, - [IRQ_CCINT0] = 7, /* dma */ - [IRQ_CCERRINT] = 7, /* dma */ - [IRQ_TCERRINT0] = 7, /* dma */ - [IRQ_TCERRINT] = 7, /* dma */ - [IRQ_DM646X_TCERRINT2] = 7, - [IRQ_DM646X_TCERRINT3] = 7, - [IRQ_DM646X_IDE] = 7, - [IRQ_DM646X_HPIINT] = 7, - [IRQ_DM646X_EMACRXTHINT] = 7, - [IRQ_DM646X_EMACRXINT] = 7, - [IRQ_DM646X_EMACTXINT] = 7, - [IRQ_DM646X_EMACMISCINT] = 7, - [IRQ_DM646X_MCASP0TXINT] = 7, - [IRQ_DM646X_MCASP0RXINT] = 7, - [IRQ_AEMIFINT] = 7, - [IRQ_DM646X_RESERVED_3] = 7, - [IRQ_DM646X_MCASP1TXINT] = 7, /* clockevent */ - [IRQ_TINT0_TINT34] = 7, /* clocksource */ - [IRQ_TINT1_TINT12] = 7, /* DSP timer */ - [IRQ_TINT1_TINT34] = 7, /* system tick */ - [IRQ_PWMINT0] = 7, - [IRQ_PWMINT1] = 7, - [IRQ_DM646X_VLQINT] = 7, - [IRQ_I2C] = 7, - [IRQ_UARTINT0] = 7, - [IRQ_UARTINT1] = 7, - [IRQ_DM646X_UARTINT2] = 7, - [IRQ_DM646X_SPINT0] = 7, - [IRQ_DM646X_SPINT1] = 7, - [IRQ_DM646X_DSP2ARMINT] = 7, - [IRQ_DM646X_RESERVED_4] = 7, - [IRQ_DM646X_PSCINT] = 7, - [IRQ_DM646X_GPIO0] = 7, - [IRQ_DM646X_GPIO1] = 7, - [IRQ_DM646X_GPIO2] = 7, - [IRQ_DM646X_GPIO3] = 7, - [IRQ_DM646X_GPIO4] = 7, - [IRQ_DM646X_GPIO5] = 7, - [IRQ_DM646X_GPIO6] = 7, - [IRQ_DM646X_GPIO7] = 7, - [IRQ_DM646X_GPIOBNK0] = 7, - [IRQ_DM646X_GPIOBNK1] = 7, - [IRQ_DM646X_GPIOBNK2] = 7, - [IRQ_DM646X_DDRINT] = 7, - [IRQ_DM646X_AEMIFINT] = 7, - [IRQ_COMMTX] = 7, - [IRQ_COMMRX] = 7, - [IRQ_EMUINT] = 7, -}; - -static const u8 dm355_default_priorities[DAVINCI_N_AINTC_IRQ] = { - [IRQ_DM355_CCDC_VDINT0] = 2, - [IRQ_DM355_CCDC_VDINT1] = 6, - [IRQ_DM355_CCDC_VDINT2] = 6, - [IRQ_DM355_IPIPE_HST] = 6, - [IRQ_DM355_H3AINT] = 6, - [IRQ_DM355_IPIPE_SDR] = 6, - [IRQ_DM355_IPIPEIFINT] = 6, - [IRQ_DM355_OSDINT] = 7, - [IRQ_DM355_VENCINT] = 6, - [IRQ_ASQINT] = 6, - [IRQ_IMXINT] = 6, - [IRQ_USBINT] = 4, - [IRQ_DM355_RTOINT] = 4, - [IRQ_DM355_UARTINT2] = 7, - [IRQ_DM355_TINT6] = 7, - [IRQ_CCINT0] = 5, /* dma */ - [IRQ_CCERRINT] = 5, /* dma */ - [IRQ_TCERRINT0] = 5, /* dma */ - [IRQ_TCERRINT] = 5, /* dma */ - [IRQ_DM355_SPINT2_1] = 7, - [IRQ_DM355_TINT7] = 4, - [IRQ_DM355_SDIOINT0] = 7, - [IRQ_MBXINT] = 7, - [IRQ_MBRINT] = 7, - [IRQ_MMCINT] = 7, - [IRQ_DM355_MMCINT1] = 7, - [IRQ_DM355_PWMINT3] = 7, - [IRQ_DDRINT] = 7, - [IRQ_AEMIFINT] = 7, - [IRQ_DM355_SDIOINT1] = 4, - [IRQ_TINT0_TINT12] = 2, /* clockevent */ - [IRQ_TINT0_TINT34] = 2, /* clocksource */ - [IRQ_TINT1_TINT12] = 7, /* DSP timer */ - [IRQ_TINT1_TINT34] = 7, /* system tick */ - [IRQ_PWMINT0] = 7, - [IRQ_PWMINT1] = 7, - [IRQ_PWMINT2] = 7, - [IRQ_I2C] = 3, - [IRQ_UARTINT0] = 3, - [IRQ_UARTINT1] = 3, - [IRQ_DM355_SPINT0_0] = 3, - [IRQ_DM355_SPINT0_1] = 3, - [IRQ_DM355_GPIO0] = 3, - [IRQ_DM355_GPIO1] = 7, - [IRQ_DM355_GPIO2] = 4, - [IRQ_DM355_GPIO3] = 4, - [IRQ_DM355_GPIO4] = 7, - [IRQ_DM355_GPIO5] = 7, - [IRQ_DM355_GPIO6] = 7, - [IRQ_DM355_GPIO7] = 7, - [IRQ_DM355_GPIO8] = 7, - [IRQ_DM355_GPIO9] = 7, - [IRQ_DM355_GPIOBNK0] = 7, - [IRQ_DM355_GPIOBNK1] = 7, - [IRQ_DM355_GPIOBNK2] = 7, - [IRQ_DM355_GPIOBNK3] = 7, - [IRQ_DM355_GPIOBNK4] = 7, - [IRQ_DM355_GPIOBNK5] = 7, - [IRQ_DM355_GPIOBNK6] = 7, - [IRQ_COMMTX] = 7, - [IRQ_COMMRX] = 7, - [IRQ_EMUINT] = 7, -}; - /* ARM Interrupt Controller Initialization */ void __init davinci_irq_init(void) { unsigned i; - - if (cpu_is_davinci_dm644x()) - davinci_def_priorities = dm644x_default_priorities; - else if (cpu_is_davinci_dm646x()) - davinci_def_priorities = dm646x_default_priorities; - else if (cpu_is_davinci_dm355()) - davinci_def_priorities = dm355_default_priorities; + const u8 *davinci_def_priorities = davinci_soc_info.intc_irq_prios; /* Clear all interrupt requests */ davinci_irq_writel(~0x0, FIQ_REG0_OFFSET); -- cgit v1.2.3 From f64691b3ab795268072e76ddb89290b6277cdf33 Mon Sep 17 00:00:00 2001 From: "Mark A. Greer" Date: Wed, 15 Apr 2009 12:40:11 -0700 Subject: davinci: Add base address and timer flexibility The davinci timer code currently hardcodes the timer register base addresses, the timer irq numbers, and the timers to use for clock events and clocksource. This won't work for some a new SoC so put those values into the soc_info structure and set them up in the SoC-specific files. Signed-off-by: Mark A. Greer Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/devices.c | 47 +++++++++++++ arch/arm/mach-davinci/dm355.c | 14 ++++ arch/arm/mach-davinci/dm644x.c | 14 ++++ arch/arm/mach-davinci/dm646x.c | 14 ++++ arch/arm/mach-davinci/include/mach/common.h | 13 ++++ arch/arm/mach-davinci/include/mach/time.h | 34 ++++++++++ arch/arm/mach-davinci/time.c | 100 +++++++++++++--------------- 7 files changed, 181 insertions(+), 55 deletions(-) create mode 100644 arch/arm/mach-davinci/include/mach/time.h diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c index 56c19319a7d..36c528ff30f 100644 --- a/arch/arm/mach-davinci/devices.c +++ b/arch/arm/mach-davinci/devices.c @@ -25,6 +25,7 @@ #include #include #include +#include #define DAVINCI_I2C_BASE 0x01C21000 #define DAVINCI_MMCSD0_BASE 0x01E10000 @@ -235,6 +236,52 @@ static void davinci_init_wdt(void) /*-------------------------------------------------------------------------*/ +struct davinci_timer_instance davinci_timer_instance[2] = { + { + .base = IO_ADDRESS(DAVINCI_TIMER0_BASE), + .bottom_irq = IRQ_TINT0_TINT12, + .top_irq = IRQ_TINT0_TINT34, + }, + { + .base = IO_ADDRESS(DAVINCI_TIMER1_BASE), + .bottom_irq = IRQ_TINT1_TINT12, + .top_irq = IRQ_TINT1_TINT34, + }, +}; + +/*-------------------------------------------------------------------------*/ + +#if defined(CONFIG_TI_DAVINCI_EMAC) || defined(CONFIG_TI_DAVINCI_EMAC_MODULE) + +void davinci_init_emac(struct emac_platform_data *pdata) +{ + DECLARE_MAC_BUF(buf); + + if (cpu_is_davinci_dm644x()) + dm644x_init_emac(pdata); + else if (cpu_is_davinci_dm646x()) + dm646x_init_emac(pdata); + + /* if valid MAC exists, don't re-register */ + if (is_valid_ether_addr(pdata->mac_addr)) + return; + else { + /* Use random MAC if none passed */ + random_ether_addr(pdata->mac_addr); + + printk(KERN_WARNING "%s: using random MAC addr: %s\n", + __func__, print_mac(buf, pdata->mac_addr)); + } +} + +#else + +void davinci_init_emac(struct emac_platform_data *unused) {} + +#endif + +/*-------------------------------------------------------------------------*/ + static int __init davinci_init_devices(void) { /* please keep these calls, and their implementations above, diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index e8c01ffe818..293a419a4a8 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -25,6 +25,7 @@ #include #include #include +#include #include #include "clock.h" @@ -616,6 +617,18 @@ static void __iomem *dm355_psc_bases[] = { IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE), }; +/* + * T0_BOT: Timer 0, bottom: clockevent source for hrtimers + * T0_TOP: Timer 0, top : clocksource for generic timekeeping + * T1_BOT: Timer 1, bottom: (used by DSP in TI DSPLink code) + * T1_TOP: Timer 1, top : + */ +struct davinci_timer_info dm355_timer_info = { + .timers = davinci_timer_instance, + .clockevent_id = T0_BOT, + .clocksource_id = T0_TOP, +}; + static struct davinci_soc_info davinci_soc_info_dm355 = { .io_desc = dm355_io_desc, .io_desc_num = ARRAY_SIZE(dm355_io_desc), @@ -632,6 +645,7 @@ static struct davinci_soc_info davinci_soc_info_dm355 = { .intc_type = DAVINCI_INTC_TYPE_AINTC, .intc_irq_prios = dm355_default_priorities, .intc_irq_num = DAVINCI_N_AINTC_IRQ, + .timer_info = &dm355_timer_info, }; void __init dm355_init(void) diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index 5c6a7b17578..8e9385c3485 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include "clock.h" @@ -559,6 +560,18 @@ static void __iomem *dm644x_psc_bases[] = { IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE), }; +/* + * T0_BOT: Timer 0, bottom: clockevent source for hrtimers + * T0_TOP: Timer 0, top : clocksource for generic timekeeping + * T1_BOT: Timer 1, bottom: (used by DSP in TI DSPLink code) + * T1_TOP: Timer 1, top : + */ +struct davinci_timer_info dm644x_timer_info = { + .timers = davinci_timer_instance, + .clockevent_id = T0_BOT, + .clocksource_id = T0_TOP, +}; + static struct davinci_soc_info davinci_soc_info_dm644x = { .io_desc = dm644x_io_desc, .io_desc_num = ARRAY_SIZE(dm644x_io_desc), @@ -575,6 +588,7 @@ static struct davinci_soc_info davinci_soc_info_dm644x = { .intc_type = DAVINCI_INTC_TYPE_AINTC, .intc_irq_prios = dm644x_default_priorities, .intc_irq_num = DAVINCI_N_AINTC_IRQ, + .timer_info = &dm644x_timer_info, }; void __init dm644x_init(void) diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index beb522e8a1a..219063f4d00 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include "clock.h" @@ -538,6 +539,18 @@ static void __iomem *dm646x_psc_bases[] = { IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE), }; +/* + * T0_BOT: Timer 0, bottom: clockevent source for hrtimers + * T0_TOP: Timer 0, top : clocksource for generic timekeeping + * T1_BOT: Timer 1, bottom: (used by DSP in TI DSPLink code) + * T1_TOP: Timer 1, top : + */ +struct davinci_timer_info dm646x_timer_info = { + .timers = davinci_timer_instance, + .clockevent_id = T0_BOT, + .clocksource_id = T0_TOP, +}; + static struct davinci_soc_info davinci_soc_info_dm646x = { .io_desc = dm646x_io_desc, .io_desc_num = ARRAY_SIZE(dm646x_io_desc), @@ -554,6 +567,7 @@ static struct davinci_soc_info davinci_soc_info_dm646x = { .intc_type = DAVINCI_INTC_TYPE_AINTC, .intc_irq_prios = dm646x_default_priorities, .intc_irq_num = DAVINCI_N_AINTC_IRQ, + .timer_info = &dm646x_timer_info, }; void __init dm646x_init(void) diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h index 838ae13595a..90b43be1174 100644 --- a/arch/arm/mach-davinci/include/mach/common.h +++ b/arch/arm/mach-davinci/include/mach/common.h @@ -25,6 +25,18 @@ extern void setup_usb(unsigned mA, unsigned potpgt_msec); /* parameters describe VBUS sourcing for host mode */ extern void setup_usb(unsigned mA, unsigned potpgt_msec); +struct davinci_timer_instance { + void __iomem *base; + u32 bottom_irq; + u32 top_irq; +}; + +struct davinci_timer_info { + struct davinci_timer_instance *timers; + unsigned int clockevent_id; + unsigned int clocksource_id; +}; + /* SoC specific init support */ struct davinci_soc_info { struct map_desc *io_desc; @@ -44,6 +56,7 @@ struct davinci_soc_info { int intc_type; u8 *intc_irq_prios; unsigned long intc_irq_num; + struct davinci_timer_info *timer_info; }; extern struct davinci_soc_info davinci_soc_info; diff --git a/arch/arm/mach-davinci/include/mach/time.h b/arch/arm/mach-davinci/include/mach/time.h new file mode 100644 index 00000000000..1428d77c989 --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/time.h @@ -0,0 +1,34 @@ +/* + * Local header file for DaVinci time code. + * + * Author: Kevin Hilman, MontaVista Software, Inc. + * + * 2007 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#ifndef __ARCH_ARM_MACH_DAVINCI_TIME_H +#define __ARCH_ARM_MACH_DAVINCI_TIME_H + +#define DAVINCI_TIMER0_BASE (IO_PHYS + 0x21400) +#define DAVINCI_TIMER1_BASE (IO_PHYS + 0x21800) + +enum { + T0_BOT, + T0_TOP, + T1_BOT, + T1_TOP, + NUM_TIMERS +}; + +#define IS_TIMER1(id) (id & 0x2) +#define IS_TIMER0(id) (!IS_TIMER1(id)) +#define IS_TIMER_TOP(id) ((id & 0x1)) +#define IS_TIMER_BOT(id) (!IS_TIMER_TOP(id)) + +#define ID_TO_TIMER(id) (IS_TIMER1(id) != 0) + +extern struct davinci_timer_instance davinci_timer_instance[]; + +#endif /* __ARCH_ARM_MACH_DAVINCI_TIME_H */ diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c index efbbc2ac63b..faafb897f4b 100644 --- a/arch/arm/mach-davinci/time.c +++ b/arch/arm/mach-davinci/time.c @@ -29,42 +29,23 @@ #include #include #include +#include #include "clock.h" static struct clock_event_device clockevent_davinci; static unsigned int davinci_clock_tick_rate; -#define DAVINCI_TIMER0_BASE (IO_PHYS + 0x21400) -#define DAVINCI_TIMER1_BASE (IO_PHYS + 0x21800) #define DAVINCI_WDOG_BASE (IO_PHYS + 0x21C00) -enum { - T0_BOT = 0, T0_TOP, T1_BOT, T1_TOP, NUM_TIMERS, -}; - -#define IS_TIMER1(id) (id & 0x2) -#define IS_TIMER0(id) (!IS_TIMER1(id)) -#define IS_TIMER_TOP(id) ((id & 0x1)) -#define IS_TIMER_BOT(id) (!IS_TIMER_TOP(id)) - -static int timer_irqs[NUM_TIMERS] = { - IRQ_TINT0_TINT12, - IRQ_TINT0_TINT34, - IRQ_TINT1_TINT12, - IRQ_TINT1_TINT34, -}; - /* * This driver configures the 2 64-bit count-up timers as 4 independent * 32-bit count-up timers used as follows: - * - * T0_BOT: Timer 0, bottom: clockevent source for hrtimers - * T0_TOP: Timer 0, top : clocksource for generic timekeeping - * T1_BOT: Timer 1, bottom: (used by DSP in TI DSPLink code) - * T1_TOP: Timer 1, top : */ -#define TID_CLOCKEVENT T0_BOT -#define TID_CLOCKSOURCE T0_TOP + +enum { + TID_CLOCKEVENT, + TID_CLOCKSOURCE, +}; /* Timer register offsets */ #define PID12 0x0 @@ -119,6 +100,13 @@ static struct timer_s timers[]; #define TIMER_OPTS_ONESHOT 0x01 #define TIMER_OPTS_PERIODIC 0x02 +static char *id_to_name[] = { + [T0_BOT] = "timer0_0", + [T0_TOP] = "timer0_1", + [T1_BOT] = "timer1_0", + [T1_TOP] = "timer1_1", +}; + static int timer32_config(struct timer_s *t) { u32 tcr = __raw_readl(t->base + TCR); @@ -183,13 +171,14 @@ static struct timer_s timers[] = { static void __init timer_init(void) { - u32 phys_bases[] = {DAVINCI_TIMER0_BASE, DAVINCI_TIMER1_BASE}; + struct davinci_soc_info *soc_info = &davinci_soc_info; + struct davinci_timer_instance *dtip = soc_info->timer_info->timers; int i; /* Global init of each 64-bit timer as a whole */ for(i=0; i<2; i++) { u32 tgcr; - void __iomem *base = IO_ADDRESS(phys_bases[i]); + void __iomem *base = dtip[i].base; /* Disabled, Internal clock source */ __raw_writel(0, base + TCR); @@ -215,33 +204,30 @@ static void __init timer_init(void) /* Init of each timer as a 32-bit timer */ for (i=0; i< ARRAY_SIZE(timers); i++) { struct timer_s *t = &timers[i]; - u32 phys_base; - - if (t->name) { - t->id = i; - phys_base = (IS_TIMER1(t->id) ? - DAVINCI_TIMER1_BASE : DAVINCI_TIMER0_BASE); - t->base = IO_ADDRESS(phys_base); - - if (IS_TIMER_BOT(t->id)) { - t->enamode_shift = 6; - t->tim_off = TIM12; - t->prd_off = PRD12; - } else { - t->enamode_shift = 22; - t->tim_off = TIM34; - t->prd_off = PRD34; - } - - /* Register interrupt */ - t->irqaction.name = t->name; - t->irqaction.dev_id = (void *)t; - if (t->irqaction.handler != NULL) { - setup_irq(timer_irqs[t->id], &t->irqaction); - } - - timer32_config(&timers[i]); + int timer = ID_TO_TIMER(t->id); + u32 irq; + + t->base = dtip[timer].base; + + if (IS_TIMER_BOT(t->id)) { + t->enamode_shift = 6; + t->tim_off = TIM12; + t->prd_off = PRD12; + irq = dtip[timer].bottom_irq; + } else { + t->enamode_shift = 22; + t->tim_off = TIM34; + t->prd_off = PRD34; + irq = dtip[timer].top_irq; } + + /* Register interrupt */ + t->irqaction.name = t->name; + t->irqaction.dev_id = (void *)t; + if (t->irqaction.handler != NULL) + setup_irq(irq, &t->irqaction); + + timer32_config(&timers[i]); } } @@ -256,7 +242,6 @@ static cycle_t read_cycles(struct clocksource *cs) } static struct clocksource clocksource_davinci = { - .name = "timer0_1", .rating = 300, .read = read_cycles, .mask = CLOCKSOURCE_MASK(32), @@ -301,7 +286,6 @@ static void davinci_set_mode(enum clock_event_mode mode, } static struct clock_event_device clockevent_davinci = { - .name = "timer0_0", .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, .shift = 32, .set_next_event = davinci_set_next_event, @@ -312,10 +296,14 @@ static struct clock_event_device clockevent_davinci = { static void __init davinci_timer_init(void) { struct clk *timer_clk; + struct davinci_soc_info *soc_info = &davinci_soc_info; static char err[] __initdata = KERN_ERR "%s: can't register clocksource!\n"; + timers[TID_CLOCKEVENT].id = soc_info->timer_info->clockevent_id; + timers[TID_CLOCKSOURCE].id = soc_info->timer_info->clocksource_id; + /* init timer hw */ timer_init(); @@ -326,6 +314,7 @@ static void __init davinci_timer_init(void) davinci_clock_tick_rate = clk_get_rate(timer_clk); /* setup clocksource */ + clocksource_davinci.name = id_to_name[timers[TID_CLOCKSOURCE].id]; clocksource_davinci.mult = clocksource_khz2mult(davinci_clock_tick_rate/1000, clocksource_davinci.shift); @@ -333,6 +322,7 @@ static void __init davinci_timer_init(void) printk(err, clocksource_davinci.name); /* setup clockevent */ + clockevent_davinci.name = id_to_name[timers[TID_CLOCKEVENT].id]; clockevent_davinci.mult = div_sc(davinci_clock_tick_rate, NSEC_PER_SEC, clockevent_davinci.shift); clockevent_davinci.max_delta_ns = -- cgit v1.2.3 From 951d6f6d703110790256abfce03ced117d2dcc6b Mon Sep 17 00:00:00 2001 From: "Mark A. Greer" Date: Wed, 15 Apr 2009 12:40:21 -0700 Subject: davinci: Add watchdog base address flexibility The watchdog code currently hardcodes the base address of the timer its using. To support new SoCs, make it support timers at any address. Use the soc_info structure to do this. Signed-off-by: Mark A. Greer Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/devices.c | 7 +++++-- arch/arm/mach-davinci/dm355.c | 1 + arch/arm/mach-davinci/dm644x.c | 1 + arch/arm/mach-davinci/dm646x.c | 1 + arch/arm/mach-davinci/include/mach/common.h | 1 + arch/arm/mach-davinci/include/mach/time.h | 1 + arch/arm/mach-davinci/time.c | 5 ++--- 7 files changed, 12 insertions(+), 5 deletions(-) diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c index 36c528ff30f..7ebf6713f6a 100644 --- a/arch/arm/mach-davinci/devices.c +++ b/arch/arm/mach-davinci/devices.c @@ -216,8 +216,6 @@ void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config) static struct resource wdt_resources[] = { { - .start = 0x01c21c00, - .end = 0x01c21fff, .flags = IORESOURCE_MEM, }, }; @@ -231,6 +229,11 @@ struct platform_device davinci_wdt_device = { static void davinci_init_wdt(void) { + struct davinci_soc_info *soc_info = &davinci_soc_info; + + wdt_resources[0].start = (resource_size_t)soc_info->wdt_base; + wdt_resources[0].end = (resource_size_t)soc_info->wdt_base + SZ_1K - 1; + platform_device_register(&davinci_wdt_device); } diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index 293a419a4a8..1b7c16cd267 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -646,6 +646,7 @@ static struct davinci_soc_info davinci_soc_info_dm355 = { .intc_irq_prios = dm355_default_priorities, .intc_irq_num = DAVINCI_N_AINTC_IRQ, .timer_info = &dm355_timer_info, + .wdt_base = IO_ADDRESS(DAVINCI_WDOG_BASE), }; void __init dm355_init(void) diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index 8e9385c3485..c66269264cc 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -589,6 +589,7 @@ static struct davinci_soc_info davinci_soc_info_dm644x = { .intc_irq_prios = dm644x_default_priorities, .intc_irq_num = DAVINCI_N_AINTC_IRQ, .timer_info = &dm644x_timer_info, + .wdt_base = IO_ADDRESS(DAVINCI_WDOG_BASE), }; void __init dm644x_init(void) diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index 219063f4d00..83d67cf6935 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -568,6 +568,7 @@ static struct davinci_soc_info davinci_soc_info_dm646x = { .intc_irq_prios = dm646x_default_priorities, .intc_irq_num = DAVINCI_N_AINTC_IRQ, .timer_info = &dm646x_timer_info, + .wdt_base = IO_ADDRESS(DAVINCI_WDOG_BASE), }; void __init dm646x_init(void) diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h index 90b43be1174..d63703826a6 100644 --- a/arch/arm/mach-davinci/include/mach/common.h +++ b/arch/arm/mach-davinci/include/mach/common.h @@ -57,6 +57,7 @@ struct davinci_soc_info { u8 *intc_irq_prios; unsigned long intc_irq_num; struct davinci_timer_info *timer_info; + void __iomem *wdt_base; }; extern struct davinci_soc_info davinci_soc_info; diff --git a/arch/arm/mach-davinci/include/mach/time.h b/arch/arm/mach-davinci/include/mach/time.h index 1428d77c989..1c971d8d8ba 100644 --- a/arch/arm/mach-davinci/include/mach/time.h +++ b/arch/arm/mach-davinci/include/mach/time.h @@ -13,6 +13,7 @@ #define DAVINCI_TIMER0_BASE (IO_PHYS + 0x21400) #define DAVINCI_TIMER1_BASE (IO_PHYS + 0x21800) +#define DAVINCI_WDOG_BASE (IO_PHYS + 0x21C00) enum { T0_BOT, diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c index faafb897f4b..f80ae25a52e 100644 --- a/arch/arm/mach-davinci/time.c +++ b/arch/arm/mach-davinci/time.c @@ -35,8 +35,6 @@ static struct clock_event_device clockevent_davinci; static unsigned int davinci_clock_tick_rate; -#define DAVINCI_WDOG_BASE (IO_PHYS + 0x21C00) - /* * This driver configures the 2 64-bit count-up timers as 4 independent * 32-bit count-up timers used as follows: @@ -343,7 +341,8 @@ struct sys_timer davinci_timer = { void davinci_watchdog_reset(void) { u32 tgcr, wdtcr; - void __iomem *base = IO_ADDRESS(DAVINCI_WDOG_BASE); + struct davinci_soc_info *soc_info = &davinci_soc_info; + void __iomem *base = soc_info->wdt_base; struct clk *wd_clk; wd_clk = clk_get(&davinci_wdt_device.dev, NULL); -- cgit v1.2.3 From a994955cc091a8a51b7d7412174d9cf6de04d26b Mon Sep 17 00:00:00 2001 From: "Mark A. Greer" Date: Wed, 15 Apr 2009 12:40:35 -0700 Subject: davinci: Make GPIO code more generic The current gpio code needs to know the number of gpio irqs there are and what the bank irq number is. To determine those values, it checks the SoC type. It also assumes that the base address and the number of irqs the interrupt controller uses is fixed. To clean up the SoC checks and make it support different base addresses and interrupt controllers, have the SoC-specific code set those values in the soc_info structure and have the gpio code reference them there. Signed-off-by: Mark A. Greer Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/dm355.c | 4 +++ arch/arm/mach-davinci/dm644x.c | 4 +++ arch/arm/mach-davinci/dm646x.c | 4 +++ arch/arm/mach-davinci/gpio.c | 39 +++++++++++------------------ arch/arm/mach-davinci/include/mach/common.h | 3 +++ arch/arm/mach-davinci/include/mach/gpio.h | 14 ++++++----- 6 files changed, 37 insertions(+), 31 deletions(-) diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index 1b7c16cd267..757def75201 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -13,6 +13,7 @@ #include #include #include +#include #include @@ -647,6 +648,9 @@ static struct davinci_soc_info davinci_soc_info_dm355 = { .intc_irq_num = DAVINCI_N_AINTC_IRQ, .timer_info = &dm355_timer_info, .wdt_base = IO_ADDRESS(DAVINCI_WDOG_BASE), + .gpio_base = IO_ADDRESS(DAVINCI_GPIO_BASE), + .gpio_num = 104, + .gpio_irq = IRQ_DM355_GPIOBNK0, }; void __init dm355_init(void) diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index c66269264cc..cfd918e41e2 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -12,6 +12,7 @@ #include #include #include +#include #include @@ -590,6 +591,9 @@ static struct davinci_soc_info davinci_soc_info_dm644x = { .intc_irq_num = DAVINCI_N_AINTC_IRQ, .timer_info = &dm644x_timer_info, .wdt_base = IO_ADDRESS(DAVINCI_WDOG_BASE), + .gpio_base = IO_ADDRESS(DAVINCI_GPIO_BASE), + .gpio_num = 71, + .gpio_irq = IRQ_GPIOBNK0, }; void __init dm644x_init(void) diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index 83d67cf6935..f980c2f95de 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -12,6 +12,7 @@ #include #include #include +#include #include @@ -569,6 +570,9 @@ static struct davinci_soc_info davinci_soc_info_dm646x = { .intc_irq_num = DAVINCI_N_AINTC_IRQ, .timer_info = &dm646x_timer_info, .wdt_base = IO_ADDRESS(DAVINCI_WDOG_BASE), + .gpio_base = IO_ADDRESS(DAVINCI_GPIO_BASE), + .gpio_num = 43, /* Only 33 usable */ + .gpio_irq = IRQ_DM646X_GPIOBNK0, }; void __init dm646x_init(void) diff --git a/arch/arm/mach-davinci/gpio.c b/arch/arm/mach-davinci/gpio.c index 40327b557d7..1b6532159c5 100644 --- a/arch/arm/mach-davinci/gpio.c +++ b/arch/arm/mach-davinci/gpio.c @@ -23,6 +23,7 @@ #include #include #include +#include #include #include @@ -37,8 +38,6 @@ struct davinci_gpio { static struct davinci_gpio chips[DIV_ROUND_UP(DAVINCI_N_GPIO, 32)]; -static unsigned __initdata ngpio; - /* create a non-inlined version */ static struct gpio_controller __iomem * __init gpio2controller(unsigned gpio) { @@ -116,23 +115,16 @@ davinci_gpio_set(struct gpio_chip *chip, unsigned offset, int value) static int __init davinci_gpio_setup(void) { int i, base; + unsigned ngpio; + struct davinci_soc_info *soc_info = &davinci_soc_info; - /* The gpio banks conceptually expose a segmented bitmap, + /* + * The gpio banks conceptually expose a segmented bitmap, * and "ngpio" is one more than the largest zero-based * bit index that's valid. */ - if (cpu_is_davinci_dm355()) { /* or dm335() */ - ngpio = 104; - } else if (cpu_is_davinci_dm644x()) { /* or dm337() */ - ngpio = 71; - } else if (cpu_is_davinci_dm646x()) { - /* NOTE: each bank has several "reserved" bits, - * unusable as GPIOs. Only 33 of the GPIO numbers - * are usable, and we're not rejecting the others. - */ - ngpio = 43; - } else { - /* if cpu_is_davinci_dm643x() ngpio = 111 */ + ngpio = soc_info->gpio_num; + if (ngpio == 0) { pr_err("GPIO setup: how many GPIOs?\n"); return -EINVAL; } @@ -279,17 +271,15 @@ gpio_irq_handler(unsigned irq, struct irq_desc *desc) static int __init davinci_gpio_irq_setup(void) { unsigned gpio, irq, bank; - unsigned bank_irq; struct clk *clk; u32 binten = 0; + unsigned ngpio, bank_irq; + struct davinci_soc_info *soc_info = &davinci_soc_info; + + ngpio = soc_info->gpio_num; - if (cpu_is_davinci_dm355()) { /* or dm335() */ - bank_irq = IRQ_DM355_GPIOBNK0; - } else if (cpu_is_davinci_dm644x()) { - bank_irq = IRQ_GPIOBNK0; - } else if (cpu_is_davinci_dm646x()) { - bank_irq = IRQ_DM646X_GPIOBNK0; - } else { + bank_irq = soc_info->gpio_irq; + if (bank_irq == 0) { printk(KERN_ERR "Don't know first GPIO bank IRQ.\n"); return -EINVAL; } @@ -329,8 +319,7 @@ static int __init davinci_gpio_irq_setup(void) /* BINTEN -- per-bank interrupt enable. genirq would also let these * bits be set/cleared dynamically. */ - __raw_writel(binten, (void *__iomem) - IO_ADDRESS(DAVINCI_GPIO_BASE + 0x08)); + __raw_writel(binten, soc_info->gpio_base + 0x08); printk(KERN_INFO "DaVinci: %d gpio irqs\n", irq - gpio_to_irq(0)); diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h index d63703826a6..06ff6d6e367 100644 --- a/arch/arm/mach-davinci/include/mach/common.h +++ b/arch/arm/mach-davinci/include/mach/common.h @@ -58,6 +58,9 @@ struct davinci_soc_info { unsigned long intc_irq_num; struct davinci_timer_info *timer_info; void __iomem *wdt_base; + void __iomem *gpio_base; + unsigned gpio_num; + unsigned gpio_irq; }; extern struct davinci_soc_info davinci_soc_info; diff --git a/arch/arm/mach-davinci/include/mach/gpio.h b/arch/arm/mach-davinci/include/mach/gpio.h index efe3281364e..ae074556831 100644 --- a/arch/arm/mach-davinci/include/mach/gpio.h +++ b/arch/arm/mach-davinci/include/mach/gpio.h @@ -17,6 +17,7 @@ #include #include +#include #define DAVINCI_GPIO_BASE 0x01C67000 @@ -67,15 +68,16 @@ static inline struct gpio_controller *__iomem __gpio_to_controller(unsigned gpio) { void *__iomem ptr; + void __iomem *base = davinci_soc_info.gpio_base; if (gpio < 32 * 1) - ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x10); + ptr = base + 0x10; else if (gpio < 32 * 2) - ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x38); + ptr = base + 0x38; else if (gpio < 32 * 3) - ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x60); + ptr = base + 0x60; else if (gpio < 32 * 4) - ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x88); + ptr = base + 0x88; else ptr = NULL; return ptr; @@ -142,13 +144,13 @@ static inline int gpio_to_irq(unsigned gpio) { if (gpio >= DAVINCI_N_GPIO) return -EINVAL; - return DAVINCI_N_AINTC_IRQ + gpio; + return davinci_soc_info.intc_irq_num + gpio; } static inline int irq_to_gpio(unsigned irq) { /* caller guarantees gpio_to_irq() succeeded */ - return irq - DAVINCI_N_AINTC_IRQ; + return irq - davinci_soc_info.intc_irq_num; } #endif /* __DAVINCI_GPIO_H */ -- cgit v1.2.3 From 65e866a9741126c678e6dcd5d4fa8c9eca18e945 Mon Sep 17 00:00:00 2001 From: "Mark A. Greer" Date: Wed, 18 Mar 2009 12:36:08 -0500 Subject: davinci: Move serial platform_device into SoC-specific files Currently, there is one set of platform_device and platform_data structures for all DaVinci SoCs. The differences in the data between the various SoCs is handled by davinci_serial_init() by checking the SoC type. However, as new SoCs appear, this routine will become more & more cluttered. To clean up the routine and make it easier to add support for new SoCs, move the platform_device and platform_data structures into the SoC-specific code and use the SoC infrastructure to provide access to the data. In the process, fix a bug where the wrong irq is used for uart2 of the dm646x. Signed-off-by: Mark A. Greer Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/dm355.c | 41 ++++++++++++++++ arch/arm/mach-davinci/dm644x.c | 41 ++++++++++++++++ arch/arm/mach-davinci/dm646x.c | 41 ++++++++++++++++ arch/arm/mach-davinci/include/mach/common.h | 1 + arch/arm/mach-davinci/include/mach/serial.h | 2 +- arch/arm/mach-davinci/serial.c | 74 ++++------------------------- 6 files changed, 135 insertions(+), 65 deletions(-) diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index 757def75201..4c3257ef5dd 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -11,6 +11,7 @@ #include #include #include +#include #include #include #include @@ -27,6 +28,7 @@ #include #include #include +#include #include #include "clock.h" @@ -630,6 +632,44 @@ struct davinci_timer_info dm355_timer_info = { .clocksource_id = T0_TOP, }; +static struct plat_serial8250_port dm355_serial_platform_data[] = { + { + .mapbase = DAVINCI_UART0_BASE, + .irq = IRQ_UARTINT0, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | + UPF_IOREMAP, + .iotype = UPIO_MEM, + .regshift = 2, + }, + { + .mapbase = DAVINCI_UART1_BASE, + .irq = IRQ_UARTINT1, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | + UPF_IOREMAP, + .iotype = UPIO_MEM, + .regshift = 2, + }, + { + .mapbase = DM355_UART2_BASE, + .irq = IRQ_DM355_UARTINT2, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | + UPF_IOREMAP, + .iotype = UPIO_MEM, + .regshift = 2, + }, + { + .flags = 0 + }, +}; + +static struct platform_device dm355_serial_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = dm355_serial_platform_data, + }, +}; + static struct davinci_soc_info davinci_soc_info_dm355 = { .io_desc = dm355_io_desc, .io_desc_num = ARRAY_SIZE(dm355_io_desc), @@ -651,6 +691,7 @@ static struct davinci_soc_info davinci_soc_info_dm355 = { .gpio_base = IO_ADDRESS(DAVINCI_GPIO_BASE), .gpio_num = 104, .gpio_irq = IRQ_DM355_GPIOBNK0, + .serial_dev = &dm355_serial_device, }; void __init dm355_init(void) diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index cfd918e41e2..a5629864d02 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -11,6 +11,7 @@ #include #include #include +#include #include #include @@ -24,6 +25,7 @@ #include #include #include +#include #include #include "clock.h" @@ -573,6 +575,44 @@ struct davinci_timer_info dm644x_timer_info = { .clocksource_id = T0_TOP, }; +static struct plat_serial8250_port dm644x_serial_platform_data[] = { + { + .mapbase = DAVINCI_UART0_BASE, + .irq = IRQ_UARTINT0, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | + UPF_IOREMAP, + .iotype = UPIO_MEM, + .regshift = 2, + }, + { + .mapbase = DAVINCI_UART1_BASE, + .irq = IRQ_UARTINT1, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | + UPF_IOREMAP, + .iotype = UPIO_MEM, + .regshift = 2, + }, + { + .mapbase = DAVINCI_UART2_BASE, + .irq = IRQ_UARTINT2, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | + UPF_IOREMAP, + .iotype = UPIO_MEM, + .regshift = 2, + }, + { + .flags = 0 + }, +}; + +static struct platform_device dm644x_serial_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = dm644x_serial_platform_data, + }, +}; + static struct davinci_soc_info davinci_soc_info_dm644x = { .io_desc = dm644x_io_desc, .io_desc_num = ARRAY_SIZE(dm644x_io_desc), @@ -594,6 +634,7 @@ static struct davinci_soc_info davinci_soc_info_dm644x = { .gpio_base = IO_ADDRESS(DAVINCI_GPIO_BASE), .gpio_num = 71, .gpio_irq = IRQ_GPIOBNK0, + .serial_dev = &dm644x_serial_device, }; void __init dm644x_init(void) diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index f980c2f95de..544658e5885 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -11,6 +11,7 @@ #include #include #include +#include #include #include @@ -24,6 +25,7 @@ #include #include #include +#include #include #include "clock.h" @@ -552,6 +554,44 @@ struct davinci_timer_info dm646x_timer_info = { .clocksource_id = T0_TOP, }; +static struct plat_serial8250_port dm646x_serial_platform_data[] = { + { + .mapbase = DAVINCI_UART0_BASE, + .irq = IRQ_UARTINT0, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | + UPF_IOREMAP, + .iotype = UPIO_MEM32, + .regshift = 2, + }, + { + .mapbase = DAVINCI_UART1_BASE, + .irq = IRQ_UARTINT1, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | + UPF_IOREMAP, + .iotype = UPIO_MEM32, + .regshift = 2, + }, + { + .mapbase = DAVINCI_UART2_BASE, + .irq = IRQ_DM646X_UARTINT2, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | + UPF_IOREMAP, + .iotype = UPIO_MEM32, + .regshift = 2, + }, + { + .flags = 0 + }, +}; + +static struct platform_device dm646x_serial_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = dm646x_serial_platform_data, + }, +}; + static struct davinci_soc_info davinci_soc_info_dm646x = { .io_desc = dm646x_io_desc, .io_desc_num = ARRAY_SIZE(dm646x_io_desc), @@ -573,6 +613,7 @@ static struct davinci_soc_info davinci_soc_info_dm646x = { .gpio_base = IO_ADDRESS(DAVINCI_GPIO_BASE), .gpio_num = 43, /* Only 33 usable */ .gpio_irq = IRQ_DM646X_GPIOBNK0, + .serial_dev = &dm646x_serial_device, }; void __init dm646x_init(void) diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h index 06ff6d6e367..9624e038253 100644 --- a/arch/arm/mach-davinci/include/mach/common.h +++ b/arch/arm/mach-davinci/include/mach/common.h @@ -61,6 +61,7 @@ struct davinci_soc_info { void __iomem *gpio_base; unsigned gpio_num; unsigned gpio_irq; + struct platform_device *serial_dev; }; extern struct davinci_soc_info davinci_soc_info; diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/include/mach/serial.h index 761ab2b483a..b0c57fa9e4e 100644 --- a/arch/arm/mach-davinci/include/mach/serial.h +++ b/arch/arm/mach-davinci/include/mach/serial.h @@ -30,6 +30,6 @@ struct davinci_uart_config { unsigned int enabled_uarts; }; -extern void davinci_serial_init(struct davinci_uart_config *); +extern int davinci_serial_init(struct davinci_uart_config *); #endif /* __ASM_ARCH_SERIAL_H */ diff --git a/arch/arm/mach-davinci/serial.c b/arch/arm/mach-davinci/serial.c index 69507579652..c530c7333d0 100644 --- a/arch/arm/mach-davinci/serial.c +++ b/arch/arm/mach-davinci/serial.c @@ -33,6 +33,8 @@ #include #include #include +#include + #include "clock.h" static inline unsigned int serial_read_reg(struct plat_serial8250_port *up, @@ -49,44 +51,6 @@ static inline void serial_write_reg(struct plat_serial8250_port *p, int offset, __raw_writel(value, IO_ADDRESS(p->mapbase) + offset); } -static struct plat_serial8250_port serial_platform_data[] = { - { - .mapbase = DAVINCI_UART0_BASE, - .irq = IRQ_UARTINT0, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | - UPF_IOREMAP, - .iotype = UPIO_MEM, - .regshift = 2, - }, - { - .mapbase = DAVINCI_UART1_BASE, - .irq = IRQ_UARTINT1, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | - UPF_IOREMAP, - .iotype = UPIO_MEM, - .regshift = 2, - }, - { - .mapbase = DAVINCI_UART2_BASE, - .irq = IRQ_UARTINT2, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | - UPF_IOREMAP, - .iotype = UPIO_MEM, - .regshift = 2, - }, - { - .flags = 0 - }, -}; - -static struct platform_device serial_device = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, - .dev = { - .platform_data = serial_platform_data, - }, -}; - static void __init davinci_serial_reset(struct plat_serial8250_port *p) { unsigned int pwremu = 0; @@ -106,35 +70,22 @@ static void __init davinci_serial_reset(struct plat_serial8250_port *p) UART_DM646X_SCR_TX_WATERMARK); } -void __init davinci_serial_init(struct davinci_uart_config *info) +int __init davinci_serial_init(struct davinci_uart_config *info) { int i; char name[16]; struct clk *uart_clk; - struct device *dev = &serial_device.dev; + struct davinci_soc_info *soc_info = &davinci_soc_info; + struct device *dev = &soc_info->serial_dev->dev; + struct plat_serial8250_port *p = dev->platform_data; /* * Make sure the serial ports are muxed on at this point. - * You have to mux them off in device drivers later on - * if not needed. + * You have to mux them off in device drivers later on if not needed. */ - for (i = 0; i < DAVINCI_MAX_NR_UARTS; i++) { - struct plat_serial8250_port *p = serial_platform_data + i; - - if (!(info->enabled_uarts & (1 << i))) { - p->flags = 0; + for (i = 0; i < DAVINCI_MAX_NR_UARTS; i++, p++) { + if (!(info->enabled_uarts & (1 << i))) continue; - } - - if (cpu_is_davinci_dm646x()) - p->iotype = UPIO_MEM32; - - if (cpu_is_davinci_dm355()) { - if (i == 2) { - p->mapbase = (unsigned long)DM355_UART2_BASE; - p->irq = IRQ_DM355_UARTINT2; - } - } sprintf(name, "uart%d", i); uart_clk = clk_get(dev, name); @@ -147,11 +98,6 @@ void __init davinci_serial_init(struct davinci_uart_config *info) davinci_serial_reset(p); } } -} -static int __init davinci_init(void) -{ - return platform_device_register(&serial_device); + return platform_device_register(soc_info->serial_dev); } - -arch_initcall(davinci_init); -- cgit v1.2.3 From 972412b648dcf0c4303dca7e515d5c24ce3cd1d5 Mon Sep 17 00:00:00 2001 From: "Mark A. Greer" Date: Wed, 15 Apr 2009 12:40:56 -0700 Subject: davinci: Move emac platform_data to SoC-specific files Since most of the emac platform_data is really SoC specific and not board specific, move it to the SoC-specific files. Put a pointer to the platform_data in the soc_info structure so the board-specific code can set some of the platform_data if it needs to. Signed-off-by: Mark A. Greer Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/board-dm644x-evm.c | 14 +++++------ arch/arm/mach-davinci/board-dm646x-evm.c | 15 ++++++------ arch/arm/mach-davinci/board-sffsdr.c | 6 +++-- arch/arm/mach-davinci/devices.c | 5 ---- arch/arm/mach-davinci/dm644x.c | 34 +++++++++++---------------- arch/arm/mach-davinci/dm646x.c | 36 +++++++++++------------------ arch/arm/mach-davinci/include/mach/common.h | 1 + arch/arm/mach-davinci/include/mach/dm644x.h | 1 - arch/arm/mach-davinci/include/mach/dm646x.h | 1 - 9 files changed, 46 insertions(+), 67 deletions(-) diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index cfe89c40973..987d27fcacb 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -38,7 +38,6 @@ #include #include -#include #include #include #include @@ -61,11 +60,6 @@ #define LXT971_PHY_ID (0x001378e2) #define LXT971_PHY_MASK (0xfffffff0) -static struct emac_platform_data dm644x_evm_emac_pdata = { - .phy_mask = DM644X_EVM_PHY_MASK, - .mdio_max_freq = DM644X_EVM_MDIO_FREQUENCY, -}; - static struct mtd_partition davinci_evm_norflash_partitions[] = { /* bootloader (UBL, U-Boot, etc) in first 5 sectors */ { @@ -448,6 +442,7 @@ static struct memory_accessor *at24_mem_acc; static void at24_setup(struct memory_accessor *mem_acc, void *context) { char mac_addr[ETH_ALEN]; + struct davinci_soc_info *soc_info = &davinci_soc_info; at24_mem_acc = mem_acc; @@ -455,7 +450,7 @@ static void at24_setup(struct memory_accessor *mem_acc, void *context) if (at24_mem_acc->read(at24_mem_acc, mac_addr, 0x7f00, ETH_ALEN) == ETH_ALEN) { printk(KERN_INFO "Read MAC addr from EEPROM: %pM\n", mac_addr); - memcpy(dm644x_evm_emac_pdata.mac_addr, mac_addr, ETH_ALEN); + memcpy(soc_info->emac_pdata->mac_addr, mac_addr, ETH_ALEN); } } @@ -650,6 +645,7 @@ static int davinci_phy_fixup(struct phy_device *phydev) static __init void davinci_evm_init(void) { struct clk *aemif_clk; + struct davinci_soc_info *soc_info = &davinci_soc_info; aemif_clk = clk_get(NULL, "aemif"); clk_enable(aemif_clk); @@ -686,7 +682,9 @@ static __init void davinci_evm_init(void) davinci_serial_init(&uart_config); - dm644x_init_emac(&dm644x_evm_emac_pdata); + soc_info->emac_pdata->phy_mask = DM644X_EVM_PHY_MASK; + soc_info->emac_pdata->mdio_max_freq = DM644X_EVM_MDIO_FREQUENCY; + dm644x_init_emac(soc_info->emac_pdata); /* Register the fixup for PHY on DaVinci */ phy_register_fixup_for_uid(LXT971_PHY_ID, LXT971_PHY_MASK, diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c index becae51d6dd..0de0637aed5 100644 --- a/arch/arm/mach-davinci/board-dm646x-evm.c +++ b/arch/arm/mach-davinci/board-dm646x-evm.c @@ -52,11 +52,6 @@ #define DM646X_EVM_PHY_MASK (0x2) #define DM646X_EVM_MDIO_FREQUENCY (2200000) /* PHY bus frequency */ -static struct emac_platform_data dm646x_evm_emac_pdata = { - .phy_mask = DM646X_EVM_PHY_MASK, - .mdio_max_freq = DM646X_EVM_MDIO_FREQUENCY, -}; - static struct davinci_uart_config uart_config __initdata = { .enabled_uarts = (1 << 0), }; @@ -208,6 +203,7 @@ static struct memory_accessor *at24_mem_acc; static void at24_setup(struct memory_accessor *mem_acc, void *context) { char mac_addr[ETH_ALEN]; + struct davinci_soc_info *soc_info = &davinci_soc_info; at24_mem_acc = mem_acc; @@ -215,7 +211,7 @@ static void at24_setup(struct memory_accessor *mem_acc, void *context) if (at24_mem_acc->read(at24_mem_acc, mac_addr, 0x7f00, ETH_ALEN) == ETH_ALEN) { pr_info("Read MAC addr from EEPROM: %pM\n", mac_addr); - memcpy(dm646x_evm_emac_pdata.mac_addr, mac_addr, ETH_ALEN); + memcpy(soc_info->emac_pdata->mac_addr, mac_addr, ETH_ALEN); } } @@ -271,9 +267,14 @@ static void __init davinci_map_io(void) static __init void evm_init(void) { + struct davinci_soc_info *soc_info = &davinci_soc_info; + evm_init_i2c(); davinci_serial_init(&uart_config); - dm646x_init_emac(&dm646x_evm_emac_pdata); + + soc_info->emac_pdata->phy_mask = DM646X_EVM_PHY_MASK; + soc_info->emac_pdata->mdio_max_freq = DM646X_EVM_MDIO_FREQUENCY; + dm646x_init_emac(soc_info->emac_pdata); } static __init void davinci_dm646x_evm_irq_init(void) diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c index 938b4467809..748a8e48541 100644 --- a/arch/arm/mach-davinci/board-sffsdr.c +++ b/arch/arm/mach-davinci/board-sffsdr.c @@ -48,7 +48,6 @@ #include #include -#include #include #include #include @@ -158,11 +157,14 @@ static void __init davinci_sffsdr_map_io(void) static __init void davinci_sffsdr_init(void) { + struct davinci_soc_info *soc_info = &davinci_soc_info; + platform_add_devices(davinci_sffsdr_devices, ARRAY_SIZE(davinci_sffsdr_devices)); sffsdr_init_i2c(); davinci_serial_init(&uart_config); - dm644x_init_emac(&sffsdr_emac_pdata); + soc_info->emac_pdata->phy_mask = SFFSDR_PHY_MASK; + soc_info->emac_pdata->mdio_max_freq = SFFSDR_MDIO_FREQUENCY; setup_usb(0, 0); /* We support only peripheral mode. */ /* mux VLYNQ pins */ diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c index 7ebf6713f6a..c0195cd3a2c 100644 --- a/arch/arm/mach-davinci/devices.c +++ b/arch/arm/mach-davinci/devices.c @@ -260,11 +260,6 @@ void davinci_init_emac(struct emac_platform_data *pdata) { DECLARE_MAC_BUF(buf); - if (cpu_is_davinci_dm644x()) - dm644x_init_emac(pdata); - else if (cpu_is_davinci_dm646x()) - dm646x_init_emac(pdata); - /* if valid MAC exists, don't re-register */ if (is_valid_ether_addr(pdata->mac_addr)) return; diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index a5629864d02..3844fc34cbb 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -319,7 +319,14 @@ struct davinci_clk dm644x_clks[] = { CLK(NULL, NULL, NULL), }; -#if defined(CONFIG_TI_DAVINCI_EMAC) || defined(CONFIG_TI_DAVINCI_EMAC_MODULE) +static struct emac_platform_data dm644x_emac_pdata = { + .ctrl_reg_offset = DM644X_EMAC_CNTRL_OFFSET, + .ctrl_mod_reg_offset = DM644X_EMAC_CNTRL_MOD_OFFSET, + .ctrl_ram_offset = DM644X_EMAC_CNTRL_RAM_OFFSET, + .mdio_reg_offset = DM644X_EMAC_MDIO_OFFSET, + .ctrl_ram_size = DM644X_EMAC_CNTRL_RAM_SIZE, + .version = EMAC_VERSION_1, +}; static struct resource dm644x_emac_resources[] = { { @@ -337,12 +344,13 @@ static struct resource dm644x_emac_resources[] = { static struct platform_device dm644x_emac_device = { .name = "davinci_emac", .id = 1, + .dev = { + .platform_data = &dm644x_emac_pdata, + }, .num_resources = ARRAY_SIZE(dm644x_emac_resources), .resource = dm644x_emac_resources, }; -#endif - /* * Device specific mux setup * @@ -520,24 +528,6 @@ static struct platform_device dm644x_edma_device = { }; /*----------------------------------------------------------------------*/ -#if defined(CONFIG_TI_DAVINCI_EMAC) || defined(CONFIG_TI_DAVINCI_EMAC_MODULE) - -void dm644x_init_emac(struct emac_platform_data *pdata) -{ - pdata->ctrl_reg_offset = DM644X_EMAC_CNTRL_OFFSET; - pdata->ctrl_mod_reg_offset = DM644X_EMAC_CNTRL_MOD_OFFSET; - pdata->ctrl_ram_offset = DM644X_EMAC_CNTRL_RAM_OFFSET; - pdata->mdio_reg_offset = DM644X_EMAC_MDIO_OFFSET; - pdata->ctrl_ram_size = DM644X_EMAC_CNTRL_RAM_SIZE; - pdata->version = EMAC_VERSION_1; - dm644x_emac_device.dev.platform_data = pdata; - platform_device_register(&dm644x_emac_device); -} -#else - -void dm644x_init_emac(struct emac_platform_data *unused) {} - -#endif static struct map_desc dm644x_io_desc[] = { { @@ -635,6 +625,7 @@ static struct davinci_soc_info davinci_soc_info_dm644x = { .gpio_num = 71, .gpio_irq = IRQ_GPIOBNK0, .serial_dev = &dm644x_serial_device, + .emac_pdata = &dm644x_emac_pdata, }; void __init dm644x_init(void) @@ -648,6 +639,7 @@ static int __init dm644x_init_devices(void) return 0; platform_device_register(&dm644x_edma_device); + platform_device_register(&dm644x_emac_device); return 0; } postcore_initcall(dm644x_init_devices); diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index 544658e5885..5185ad55fc5 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -286,7 +286,15 @@ struct davinci_clk dm646x_clks[] = { CLK(NULL, NULL, NULL), }; -#if defined(CONFIG_TI_DAVINCI_EMAC) || defined(CONFIG_TI_DAVINCI_EMAC_MODULE) +static struct emac_platform_data dm646x_emac_pdata = { + .ctrl_reg_offset = DM646X_EMAC_CNTRL_OFFSET, + .ctrl_mod_reg_offset = DM646X_EMAC_CNTRL_MOD_OFFSET, + .ctrl_ram_offset = DM646X_EMAC_CNTRL_RAM_OFFSET, + .mdio_reg_offset = DM646X_EMAC_MDIO_OFFSET, + .ctrl_ram_size = DM646X_EMAC_CNTRL_RAM_SIZE, + .version = EMAC_VERSION_2, +}; + static struct resource dm646x_emac_resources[] = { { .start = DM646X_EMAC_BASE, @@ -318,12 +326,13 @@ static struct resource dm646x_emac_resources[] = { static struct platform_device dm646x_emac_device = { .name = "davinci_emac", .id = 1, + .dev = { + .platform_data = &dm646x_emac_pdata, + }, .num_resources = ARRAY_SIZE(dm646x_emac_resources), .resource = dm646x_emac_resources, }; -#endif - /* * Device specific mux setup * @@ -499,25 +508,6 @@ static struct platform_device dm646x_edma_device = { /*----------------------------------------------------------------------*/ -#if defined(CONFIG_TI_DAVINCI_EMAC) || defined(CONFIG_TI_DAVINCI_EMAC_MODULE) - -void dm646x_init_emac(struct emac_platform_data *pdata) -{ - pdata->ctrl_reg_offset = DM646X_EMAC_CNTRL_OFFSET; - pdata->ctrl_mod_reg_offset = DM646X_EMAC_CNTRL_MOD_OFFSET; - pdata->ctrl_ram_offset = DM646X_EMAC_CNTRL_RAM_OFFSET; - pdata->mdio_reg_offset = DM646X_EMAC_MDIO_OFFSET; - pdata->ctrl_ram_size = DM646X_EMAC_CNTRL_RAM_SIZE; - pdata->version = EMAC_VERSION_2; - dm646x_emac_device.dev.platform_data = pdata; - platform_device_register(&dm646x_emac_device); -} -#else - -void dm646x_init_emac(struct emac_platform_data *unused) {} - -#endif - static struct map_desc dm646x_io_desc[] = { { .virtual = IO_VIRT, @@ -614,6 +604,7 @@ static struct davinci_soc_info davinci_soc_info_dm646x = { .gpio_num = 43, /* Only 33 usable */ .gpio_irq = IRQ_DM646X_GPIOBNK0, .serial_dev = &dm646x_serial_device, + .emac_pdata = &dm646x_emac_pdata, }; void __init dm646x_init(void) @@ -627,6 +618,7 @@ static int __init dm646x_init_devices(void) return 0; platform_device_register(&dm646x_edma_device); + platform_device_register(&dm646x_emac_device); return 0; } postcore_initcall(dm646x_init_devices); diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h index 9624e038253..b773d92e737 100644 --- a/arch/arm/mach-davinci/include/mach/common.h +++ b/arch/arm/mach-davinci/include/mach/common.h @@ -62,6 +62,7 @@ struct davinci_soc_info { unsigned gpio_num; unsigned gpio_irq; struct platform_device *serial_dev; + struct emac_platform_data *emac_pdata; }; extern struct davinci_soc_info davinci_soc_info; diff --git a/arch/arm/mach-davinci/include/mach/dm644x.h b/arch/arm/mach-davinci/include/mach/dm644x.h index ace167aec46..15d42b92a8c 100644 --- a/arch/arm/mach-davinci/include/mach/dm644x.h +++ b/arch/arm/mach-davinci/include/mach/dm644x.h @@ -34,6 +34,5 @@ #define DM644X_EMAC_CNTRL_RAM_SIZE (0x2000) void __init dm644x_init(void); -void dm644x_init_emac(struct emac_platform_data *pdata); #endif /* __ASM_ARCH_DM644X_H */ diff --git a/arch/arm/mach-davinci/include/mach/dm646x.h b/arch/arm/mach-davinci/include/mach/dm646x.h index ea7b28e112f..1fc764c8646 100644 --- a/arch/arm/mach-davinci/include/mach/dm646x.h +++ b/arch/arm/mach-davinci/include/mach/dm646x.h @@ -22,6 +22,5 @@ #define DM646X_EMAC_CNTRL_RAM_SIZE (0x2000) void __init dm646x_init(void); -void dm646x_init_emac(struct emac_platform_data *pdata); #endif /* __ASM_ARCH_DM646X_H */ -- cgit v1.2.3 From c97909fcf1611645f0fe235b332e39623588d84c Mon Sep 17 00:00:00 2001 From: "Mark A. Greer" Date: Wed, 15 Apr 2009 12:41:15 -0700 Subject: davinci: Remove unused i2c eeprom_read/write routines The dm644x and dm646x board files have i2c eeprom read and write routines but they are not used so remove them. Signed-off-by: Mark A. Greer Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/board-dm646x-evm.c | 16 ---------------- arch/arm/mach-davinci/include/mach/board-dm6446evm.h | 20 -------------------- 2 files changed, 36 deletions(-) delete mode 100644 arch/arm/mach-davinci/include/mach/board-dm6446evm.h diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c index 0de0637aed5..44e2ab665af 100644 --- a/arch/arm/mach-davinci/board-dm646x-evm.c +++ b/arch/arm/mach-davinci/board-dm646x-evm.c @@ -222,22 +222,6 @@ static struct at24_platform_data eeprom_info = { .setup = at24_setup, }; -int dm646xevm_eeprom_read(void *buf, off_t off, size_t count) -{ - if (at24_mem_acc) - return at24_mem_acc->read(at24_mem_acc, buf, off, count); - return -ENODEV; -} -EXPORT_SYMBOL(dm646xevm_eeprom_read); - -int dm646xevm_eeprom_write(void *buf, off_t off, size_t count) -{ - if (at24_mem_acc) - return at24_mem_acc->write(at24_mem_acc, buf, off, count); - return -ENODEV; -} -EXPORT_SYMBOL(dm646xevm_eeprom_write); - static struct i2c_board_info __initdata i2c_info[] = { { I2C_BOARD_INFO("24c256", 0x50), diff --git a/arch/arm/mach-davinci/include/mach/board-dm6446evm.h b/arch/arm/mach-davinci/include/mach/board-dm6446evm.h deleted file mode 100644 index 3216f21c123..00000000000 --- a/arch/arm/mach-davinci/include/mach/board-dm6446evm.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * DaVinci DM6446 EVM board specific headers - * - * Author: Kevin Hilman, Deep Root Systems, LLC - * - * 2007 (c) Deep Root Systems, LLC. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or ifndef. - */ - -#ifndef _MACH_DAVINCI_DM6446EVM_H -#define _MACH_DAVINCI_DM6446EVM_H - -#include - -int dm6446evm_eeprom_read(char *buf, off_t off, size_t count); -int dm6446evm_eeprom_write(char *buf, off_t off, size_t count); - -#endif -- cgit v1.2.3 From b14dc0f9942a9c318c6c49f29511d88b3642e2d0 Mon Sep 17 00:00:00 2001 From: "Mark A. Greer" Date: Wed, 15 Apr 2009 12:41:27 -0700 Subject: davinci: Factor out emac mac address handling Factor out the code to extract that mac address from i2c eeprom. Signed-off-by: Mark A. Greer Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/board-dm644x-evm.c | 21 +++------------------ arch/arm/mach-davinci/board-dm646x-evm.c | 20 ++------------------ arch/arm/mach-davinci/common.c | 12 ++++++++++++ arch/arm/mach-davinci/devices.c | 26 -------------------------- arch/arm/mach-davinci/include/mach/emac.h | 6 +++--- 5 files changed, 20 insertions(+), 65 deletions(-) diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index 987d27fcacb..d9d40450bdc 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -44,6 +44,7 @@ #include #include #include +#include #include #define DM644X_EVM_PHY_MASK (0x2) @@ -437,28 +438,13 @@ static struct pcf857x_platform_data pcf_data_u35 = { * - 0x0039, 1 byte NTSC vs PAL (bit 0x80 == PAL) * - ... newer boards may have more */ -static struct memory_accessor *at24_mem_acc; - -static void at24_setup(struct memory_accessor *mem_acc, void *context) -{ - char mac_addr[ETH_ALEN]; - struct davinci_soc_info *soc_info = &davinci_soc_info; - - at24_mem_acc = mem_acc; - - /* Read MAC addr from EEPROM */ - if (at24_mem_acc->read(at24_mem_acc, mac_addr, 0x7f00, ETH_ALEN) == - ETH_ALEN) { - printk(KERN_INFO "Read MAC addr from EEPROM: %pM\n", mac_addr); - memcpy(soc_info->emac_pdata->mac_addr, mac_addr, ETH_ALEN); - } -} static struct at24_platform_data eeprom_info = { .byte_len = (256*1024) / 8, .page_size = 64, .flags = AT24_FLAG_ADDR16, - .setup = at24_setup, + .setup = davinci_get_mac_addr, + .context = (void *)0x7f00, }; /* @@ -684,7 +670,6 @@ static __init void davinci_evm_init(void) soc_info->emac_pdata->phy_mask = DM644X_EVM_PHY_MASK; soc_info->emac_pdata->mdio_max_freq = DM644X_EVM_MDIO_FREQUENCY; - dm644x_init_emac(soc_info->emac_pdata); /* Register the fixup for PHY on DaVinci */ phy_register_fixup_for_uid(LXT971_PHY_ID, LXT971_PHY_MASK, diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c index 44e2ab665af..e17de635262 100644 --- a/arch/arm/mach-davinci/board-dm646x-evm.c +++ b/arch/arm/mach-davinci/board-dm646x-evm.c @@ -198,28 +198,13 @@ static struct pcf857x_platform_data pcf_data = { * - 0x7f00, 6 bytes Ethernet Address * - ... newer boards may have more */ -static struct memory_accessor *at24_mem_acc; - -static void at24_setup(struct memory_accessor *mem_acc, void *context) -{ - char mac_addr[ETH_ALEN]; - struct davinci_soc_info *soc_info = &davinci_soc_info; - - at24_mem_acc = mem_acc; - - /* Read MAC addr from EEPROM */ - if (at24_mem_acc->read(at24_mem_acc, mac_addr, 0x7f00, ETH_ALEN) == - ETH_ALEN) { - pr_info("Read MAC addr from EEPROM: %pM\n", mac_addr); - memcpy(soc_info->emac_pdata->mac_addr, mac_addr, ETH_ALEN); - } -} static struct at24_platform_data eeprom_info = { .byte_len = (256*1024) / 8, .page_size = 64, .flags = AT24_FLAG_ADDR16, - .setup = at24_setup, + .setup = davinci_get_mac_addr, + .context = (void *)0x7f00, }; static struct i2c_board_info __initdata i2c_info[] = { @@ -258,7 +243,6 @@ static __init void evm_init(void) soc_info->emac_pdata->phy_mask = DM646X_EVM_PHY_MASK; soc_info->emac_pdata->mdio_max_freq = DM646X_EVM_MDIO_FREQUENCY; - dm646x_init_emac(soc_info->emac_pdata); } static __init void davinci_dm646x_evm_irq_init(void) diff --git a/arch/arm/mach-davinci/common.c b/arch/arm/mach-davinci/common.c index d72d517d090..169ec73f8d7 100644 --- a/arch/arm/mach-davinci/common.c +++ b/arch/arm/mach-davinci/common.c @@ -10,12 +10,14 @@ */ #include #include +#include #include #include #include #include +#include #include "clock.h" @@ -24,6 +26,16 @@ EXPORT_SYMBOL(davinci_soc_info); void __iomem *davinci_intc_base; +void davinci_get_mac_addr(struct memory_accessor *mem_acc, void *context) +{ + char *mac_addr = davinci_soc_info.emac_pdata->mac_addr; + off_t offset = (off_t)context; + + /* Read MAC addr from EEPROM */ + if (mem_acc->read(mem_acc, mac_addr, offset, ETH_ALEN) == ETH_ALEN) + pr_info("Read MAC addr from EEPROM: %pM\n", mac_addr); +} + static struct davinci_id * __init davinci_get_id(u32 jtag_id) { int i; diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c index c0195cd3a2c..c85091c25d1 100644 --- a/arch/arm/mach-davinci/devices.c +++ b/arch/arm/mach-davinci/devices.c @@ -254,32 +254,6 @@ struct davinci_timer_instance davinci_timer_instance[2] = { /*-------------------------------------------------------------------------*/ -#if defined(CONFIG_TI_DAVINCI_EMAC) || defined(CONFIG_TI_DAVINCI_EMAC_MODULE) - -void davinci_init_emac(struct emac_platform_data *pdata) -{ - DECLARE_MAC_BUF(buf); - - /* if valid MAC exists, don't re-register */ - if (is_valid_ether_addr(pdata->mac_addr)) - return; - else { - /* Use random MAC if none passed */ - random_ether_addr(pdata->mac_addr); - - printk(KERN_WARNING "%s: using random MAC addr: %s\n", - __func__, print_mac(buf, pdata->mac_addr)); - } -} - -#else - -void davinci_init_emac(struct emac_platform_data *unused) {} - -#endif - -/*-------------------------------------------------------------------------*/ - static int __init davinci_init_devices(void) { /* please keep these calls, and their implementations above, diff --git a/arch/arm/mach-davinci/include/mach/emac.h b/arch/arm/mach-davinci/include/mach/emac.h index 549fcced217..beff4fb7c84 100644 --- a/arch/arm/mach-davinci/include/mach/emac.h +++ b/arch/arm/mach-davinci/include/mach/emac.h @@ -12,6 +12,7 @@ #define _MACH_DAVINCI_EMAC_H #include +#include struct emac_platform_data { char mac_addr[ETH_ALEN]; @@ -30,7 +31,6 @@ enum { EMAC_VERSION_1, /* DM644x */ EMAC_VERSION_2, /* DM646x */ }; -void davinci_init_emac(struct emac_platform_data *pdata); -#endif - +void davinci_get_mac_addr(struct memory_accessor *mem_acc, void *context); +#endif -- cgit v1.2.3 From 0b0c4c2a6974eae7b96066cb0da35b526fe58468 Mon Sep 17 00:00:00 2001 From: "Mark A. Greer" Date: Wed, 15 Apr 2009 12:41:40 -0700 Subject: davinci: Integrate cp_intc support into low-level irq code Integrate the Common Platform Interrupt Controller (cp_intc) support into the low-level irq handling for davinci and similar platforms. Do it such that support for cp_intc and the original aintc can coexist in the same kernel binary. Signed-off-by: Mark A. Greer Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/Kconfig | 6 ++++++ arch/arm/mach-davinci/Makefile | 6 ++++-- arch/arm/mach-davinci/common.c | 2 ++ arch/arm/mach-davinci/include/mach/common.h | 1 + arch/arm/mach-davinci/include/mach/entry-macro.S | 19 +++++++++++++++++++ 5 files changed, 32 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index d7614a0ab2f..76408670554 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -1,5 +1,8 @@ if ARCH_DAVINCI +config AINTC + bool + config CP_INTC bool @@ -9,12 +12,15 @@ comment "DaVinci Core Type" config ARCH_DAVINCI_DM644x bool "DaVinci 644x based system" + select AINTC config ARCH_DAVINCI_DM355 bool "DaVinci 355 based system" + select AINTC config ARCH_DAVINCI_DM646x bool "DaVinci 646x based system" + select AINTC comment "DaVinci Board Type" diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile index a65d03bb467..5b62d8a4b18 100644 --- a/arch/arm/mach-davinci/Makefile +++ b/arch/arm/mach-davinci/Makefile @@ -4,17 +4,19 @@ # # Common objects -obj-y := time.o irq.o clock.o serial.o io.o psc.o \ +obj-y := time.o clock.o serial.o io.o psc.o \ gpio.o devices.o dma.o usb.o common.o obj-$(CONFIG_DAVINCI_MUX) += mux.o -obj-$(CONFIG_CP_INTC) += cp_intc.o # Chip specific obj-$(CONFIG_ARCH_DAVINCI_DM644x) += dm644x.o obj-$(CONFIG_ARCH_DAVINCI_DM355) += dm355.o obj-$(CONFIG_ARCH_DAVINCI_DM646x) += dm646x.o +obj-$(CONFIG_AINTC) += irq.o +obj-$(CONFIG_CP_INTC) += cp_intc.o + # Board specific obj-$(CONFIG_MACH_DAVINCI_EVM) += board-dm644x-evm.o obj-$(CONFIG_MACH_SFFSDR) += board-sffsdr.o diff --git a/arch/arm/mach-davinci/common.c b/arch/arm/mach-davinci/common.c index 169ec73f8d7..61ede19c6b5 100644 --- a/arch/arm/mach-davinci/common.c +++ b/arch/arm/mach-davinci/common.c @@ -25,6 +25,7 @@ struct davinci_soc_info davinci_soc_info; EXPORT_SYMBOL(davinci_soc_info); void __iomem *davinci_intc_base; +int davinci_intc_type; void davinci_get_mac_addr(struct memory_accessor *mem_acc, void *context) { @@ -99,6 +100,7 @@ void __init davinci_common_init(struct davinci_soc_info *soc_info) } davinci_intc_base = davinci_soc_info.intc_base; + davinci_intc_type = davinci_soc_info.intc_type; return; err: diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h index b773d92e737..22db6774487 100644 --- a/arch/arm/mach-davinci/include/mach/common.h +++ b/arch/arm/mach-davinci/include/mach/common.h @@ -18,6 +18,7 @@ extern struct sys_timer davinci_timer; extern void davinci_irq_init(void); extern void __iomem *davinci_intc_base; +extern int davinci_intc_type; /* parameters describe VBUS sourcing for host mode */ extern void setup_usb(unsigned mA, unsigned potpgt_msec); diff --git a/arch/arm/mach-davinci/include/mach/entry-macro.S b/arch/arm/mach-davinci/include/mach/entry-macro.S index ed78851fe4a..fbdebc7cb40 100644 --- a/arch/arm/mach-davinci/include/mach/entry-macro.S +++ b/arch/arm/mach-davinci/include/mach/entry-macro.S @@ -23,9 +23,28 @@ .endm .macro get_irqnr_and_base, irqnr, irqstat, base, tmp +#if defined(CONFIG_AINTC) && defined(CONFIG_CP_INTC) + ldr \tmp, =davinci_intc_type + ldr \tmp, [\tmp] + cmp \tmp, #DAVINCI_INTC_TYPE_CP_INTC + beq 1001f +#endif +#if defined(CONFIG_AINTC) ldr \tmp, [\base, #0x14] movs \tmp, \tmp, lsr #2 sub \irqnr, \tmp, #1 + b 1002f +#endif +#if defined(CONFIG_CP_INTC) +1001: ldr \irqnr, [\base, #0x80] /* get irq number */ + and \irqnr, \irqnr, #0xff /* irq is in bits 0-9 */ + mov \tmp, \irqnr, lsr #3 + and \tmp, \tmp, #0xfc + add \tmp, \tmp, #0x280 /* get the register offset */ + ldr \irqstat, [\base, \tmp] /* get the intc status */ + cmp \irqstat, #0x0 +#endif +1002: .endm .macro irq_prio_table -- cgit v1.2.3 From 3abd5acfff0111809463bcfd7236a1bdf09e4e2d Mon Sep 17 00:00:00 2001 From: "Mark A. Greer" Date: Wed, 15 Apr 2009 12:41:54 -0700 Subject: davinci: Add compare register support to timer code The Timer64p timer has 8 compare registers that can be used to generate interrupts when the timer value matches the compare reg's value. They do not disturb the timer itself. This can be useful when there is only one timer available for both clock events and clocksource. When enabled, the clocksource remains a continuous 32-bit counter but the clock event will no longer support periodic interrupts. Instead only oneshot timers will be supported and implemented by setting the compare register to the current timer value plus the period that the clock event subsystem is requesting. Compare registers support is enabled automatically when the following conditions are met: 1) The same timer is being used for clock events and clocksource. 2) The timer is the bottom half (32 bits) of the 64-bit timer (hardware limitation). 3) The the compare register offset and irq are not zero. Since the timer is always running, there is a hardware race in timer32_config() between reading the current timer value, and adding the period to the current timer value and writing the compare register. Testing on a da830 evm board with the timer clocked at 24 MHz and the processor clocked at 300 MHz, showed the number of counter ticks to do this ranged from 20-53 (~1-2.2 usecs) but usually around 41 ticks. This includes some artifacts from collecting the information. So, the minimum period should be at least 5 usecs to be safe. There is also an non-critical lower limit that the period should be since there is no point in setting an event that is much shorter than the time it takes to set the event, and get & handle the timer interrupt for that event. There can also be all sorts of delays from activities occuring elsewhere in the system (including hardware activitis like cache & TLB management). These are virtually impossible to quantify so a minimum period of 50 usecs was chosen. That will certianly be enough to avoid the actual hardware race but hopefully not large enough to cause unreasonably course-grained timers. Signed-off-by: Mark A. Greer Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/include/mach/common.h | 2 + arch/arm/mach-davinci/time.c | 141 ++++++++++++++++++++-------- 2 files changed, 105 insertions(+), 38 deletions(-) diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h index 22db6774487..715528f0dbd 100644 --- a/arch/arm/mach-davinci/include/mach/common.h +++ b/arch/arm/mach-davinci/include/mach/common.h @@ -30,6 +30,8 @@ struct davinci_timer_instance { void __iomem *base; u32 bottom_irq; u32 top_irq; + unsigned long cmp_off; + unsigned int cmp_irq; }; struct davinci_timer_info { diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c index f80ae25a52e..fc90d3ee0eb 100644 --- a/arch/arm/mach-davinci/time.c +++ b/arch/arm/mach-davinci/time.c @@ -46,14 +46,24 @@ enum { }; /* Timer register offsets */ -#define PID12 0x0 -#define TIM12 0x10 -#define TIM34 0x14 -#define PRD12 0x18 -#define PRD34 0x1c -#define TCR 0x20 -#define TGCR 0x24 -#define WDTCR 0x28 +#define PID12 0x0 +#define TIM12 0x10 +#define TIM34 0x14 +#define PRD12 0x18 +#define PRD34 0x1c +#define TCR 0x20 +#define TGCR 0x24 +#define WDTCR 0x28 + +/* Offsets of the 8 compare registers */ +#define CMP12_0 0x60 +#define CMP12_1 0x64 +#define CMP12_2 0x68 +#define CMP12_3 0x6c +#define CMP12_4 0x70 +#define CMP12_5 0x74 +#define CMP12_6 0x78 +#define CMP12_7 0x7c /* Timer register bitfields */ #define TCR_ENAMODE_DISABLE 0x0 @@ -85,6 +95,7 @@ struct timer_s { unsigned int id; unsigned long period; unsigned long opts; + unsigned long flags; void __iomem *base; unsigned long tim_off; unsigned long prd_off; @@ -94,9 +105,13 @@ struct timer_s { static struct timer_s timers[]; /* values for 'opts' field of struct timer_s */ -#define TIMER_OPTS_DISABLED 0x00 -#define TIMER_OPTS_ONESHOT 0x01 -#define TIMER_OPTS_PERIODIC 0x02 +#define TIMER_OPTS_DISABLED 0x01 +#define TIMER_OPTS_ONESHOT 0x02 +#define TIMER_OPTS_PERIODIC 0x04 +#define TIMER_OPTS_STATE_MASK 0x07 + +#define TIMER_OPTS_USE_COMPARE 0x80000000 +#define USING_COMPARE(t) ((t)->opts & TIMER_OPTS_USE_COMPARE) static char *id_to_name[] = { [T0_BOT] = "timer0_0", @@ -107,24 +122,41 @@ static char *id_to_name[] = { static int timer32_config(struct timer_s *t) { - u32 tcr = __raw_readl(t->base + TCR); - - /* disable timer */ - tcr &= ~(TCR_ENAMODE_MASK << t->enamode_shift); - __raw_writel(tcr, t->base + TCR); - - /* reset counter to zero, set new period */ - __raw_writel(0, t->base + t->tim_off); - __raw_writel(t->period, t->base + t->prd_off); - - /* Set enable mode */ - if (t->opts & TIMER_OPTS_ONESHOT) { - tcr |= TCR_ENAMODE_ONESHOT << t->enamode_shift; - } else if (t->opts & TIMER_OPTS_PERIODIC) { - tcr |= TCR_ENAMODE_PERIODIC << t->enamode_shift; + u32 tcr; + struct davinci_soc_info *soc_info = davinci_get_soc_info(); + + if (USING_COMPARE(t)) { + struct davinci_timer_instance *dtip = + soc_info->timer_info->timers; + int event_timer = ID_TO_TIMER(timers[TID_CLOCKEVENT].id); + + /* + * Next interrupt should be the current time reg value plus + * the new period (using 32-bit unsigned addition/wrapping + * to 0 on overflow). This assumes that the clocksource + * is setup to count to 2^32-1 before wrapping around to 0. + */ + __raw_writel(__raw_readl(t->base + t->tim_off) + t->period, + t->base + dtip[event_timer].cmp_off); + } else { + tcr = __raw_readl(t->base + TCR); + + /* disable timer */ + tcr &= ~(TCR_ENAMODE_MASK << t->enamode_shift); + __raw_writel(tcr, t->base + TCR); + + /* reset counter to zero, set new period */ + __raw_writel(0, t->base + t->tim_off); + __raw_writel(t->period, t->base + t->prd_off); + + /* Set enable mode */ + if (t->opts & TIMER_OPTS_ONESHOT) + tcr |= TCR_ENAMODE_ONESHOT << t->enamode_shift; + else if (t->opts & TIMER_OPTS_PERIODIC) + tcr |= TCR_ENAMODE_PERIODIC << t->enamode_shift; + + __raw_writel(tcr, t->base + TCR); } - - __raw_writel(tcr, t->base + TCR); return 0; } @@ -222,8 +254,11 @@ static void __init timer_init(void) /* Register interrupt */ t->irqaction.name = t->name; t->irqaction.dev_id = (void *)t; - if (t->irqaction.handler != NULL) + + if (t->irqaction.handler != NULL) { + irq = USING_COMPARE(t) ? dtip[i].cmp_irq : irq; setup_irq(irq, &t->irqaction); + } timer32_config(&timers[i]); } @@ -268,15 +303,18 @@ static void davinci_set_mode(enum clock_event_mode mode, switch (mode) { case CLOCK_EVT_MODE_PERIODIC: t->period = davinci_clock_tick_rate / (HZ); - t->opts = TIMER_OPTS_PERIODIC; + t->opts &= ~TIMER_OPTS_STATE_MASK; + t->opts |= TIMER_OPTS_PERIODIC; timer32_config(t); break; case CLOCK_EVT_MODE_ONESHOT: - t->opts = TIMER_OPTS_ONESHOT; + t->opts &= ~TIMER_OPTS_STATE_MASK; + t->opts |= TIMER_OPTS_ONESHOT; break; case CLOCK_EVT_MODE_UNUSED: case CLOCK_EVT_MODE_SHUTDOWN: - t->opts = TIMER_OPTS_DISABLED; + t->opts &= ~TIMER_OPTS_STATE_MASK; + t->opts |= TIMER_OPTS_DISABLED; break; case CLOCK_EVT_MODE_RESUME: break; @@ -295,12 +333,40 @@ static void __init davinci_timer_init(void) { struct clk *timer_clk; struct davinci_soc_info *soc_info = &davinci_soc_info; - + unsigned int clockevent_id; + unsigned int clocksource_id; static char err[] __initdata = KERN_ERR "%s: can't register clocksource!\n"; - timers[TID_CLOCKEVENT].id = soc_info->timer_info->clockevent_id; - timers[TID_CLOCKSOURCE].id = soc_info->timer_info->clocksource_id; + clockevent_id = soc_info->timer_info->clockevent_id; + clocksource_id = soc_info->timer_info->clocksource_id; + + timers[TID_CLOCKEVENT].id = clockevent_id; + timers[TID_CLOCKSOURCE].id = clocksource_id; + + /* + * If using same timer for both clock events & clocksource, + * a compare register must be used to generate an event interrupt. + * This is equivalent to a oneshot timer only (not periodic). + */ + if (clockevent_id == clocksource_id) { + struct davinci_timer_instance *dtip = + soc_info->timer_info->timers; + int event_timer = ID_TO_TIMER(clockevent_id); + + /* Only bottom timers can use compare regs */ + if (IS_TIMER_TOP(clockevent_id)) + pr_warning("davinci_timer_init: Invalid use" + " of system timers. Results unpredictable.\n"); + else if ((dtip[event_timer].cmp_off == 0) + || (dtip[event_timer].cmp_irq == 0)) + pr_warning("davinci_timer_init: Invalid timer instance" + " setup. Results unpredictable.\n"); + else { + timers[TID_CLOCKEVENT].opts |= TIMER_OPTS_USE_COMPARE; + clockevent_davinci.features = CLOCK_EVT_FEAT_ONESHOT; + } + } /* init timer hw */ timer_init(); @@ -312,7 +378,7 @@ static void __init davinci_timer_init(void) davinci_clock_tick_rate = clk_get_rate(timer_clk); /* setup clocksource */ - clocksource_davinci.name = id_to_name[timers[TID_CLOCKSOURCE].id]; + clocksource_davinci.name = id_to_name[clocksource_id]; clocksource_davinci.mult = clocksource_khz2mult(davinci_clock_tick_rate/1000, clocksource_davinci.shift); @@ -325,8 +391,7 @@ static void __init davinci_timer_init(void) clockevent_davinci.shift); clockevent_davinci.max_delta_ns = clockevent_delta2ns(0xfffffffe, &clockevent_davinci); - clockevent_davinci.min_delta_ns = - clockevent_delta2ns(1, &clockevent_davinci); + clockevent_davinci.min_delta_ns = 50000; /* 50 usec */ clockevent_davinci.cpumask = cpumask_of(0); clockevents_register_device(&clockevent_davinci); -- cgit v1.2.3 From 5570078c0ec5ecc5df0bbd7d06f43549b7127ae7 Mon Sep 17 00:00:00 2001 From: "Mark A. Greer" Date: Wed, 15 Apr 2009 12:42:06 -0700 Subject: davinci: Move PINMUX defines to SoC files Different SoC have different numbers of pinmux registers and other resources that overlap with each other. To clean up the code and eliminate defines that overlap with each other, move the PINMUX defines to the SoC specific files. Signed-off-by: Mark A. Greer Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/dm355.c | 8 ++++++++ arch/arm/mach-davinci/dm644x.c | 3 +++ arch/arm/mach-davinci/dm646x.c | 3 +++ arch/arm/mach-davinci/include/mach/mux.h | 10 ---------- arch/arm/mach-davinci/time.c | 2 +- 5 files changed, 15 insertions(+), 11 deletions(-) diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index 4c3257ef5dd..78fc598b0bc 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -433,6 +433,14 @@ void __init dm355_init_spi0(unsigned chipselect_mask, /*----------------------------------------------------------------------*/ +#define PINMUX0 0x00 +#define PINMUX1 0x04 +#define PINMUX2 0x08 +#define PINMUX3 0x0c +#define PINMUX4 0x10 +#define INTMUX 0x18 +#define EVTMUX 0x1c + /* * Device specific mux setup * diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index 3844fc34cbb..4ab5f07ead0 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -351,6 +351,9 @@ static struct platform_device dm644x_emac_device = { .resource = dm644x_emac_resources, }; +#define PINMUX0 0x00 +#define PINMUX1 0x04 + /* * Device specific mux setup * diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index 5185ad55fc5..12189c737a3 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -333,6 +333,9 @@ static struct platform_device dm646x_emac_device = { .resource = dm646x_emac_resources, }; +#define PINMUX0 0x00 +#define PINMUX1 0x04 + /* * Device specific mux setup * diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h index 5d6efa80af6..27378458542 100644 --- a/arch/arm/mach-davinci/include/mach/mux.h +++ b/arch/arm/mach-davinci/include/mach/mux.h @@ -19,16 +19,6 @@ #ifndef __INC_MACH_MUX_H #define __INC_MACH_MUX_H -/* System module registers */ -#define PINMUX0 0x00 -#define PINMUX1 0x04 -/* dm355 only */ -#define PINMUX2 0x08 -#define PINMUX3 0x0c -#define PINMUX4 0x10 -#define INTMUX 0x18 -#define EVTMUX 0x1c - struct mux_config { const char *name; const char *mux_reg_name; diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c index fc90d3ee0eb..0884ca57bfb 100644 --- a/arch/arm/mach-davinci/time.c +++ b/arch/arm/mach-davinci/time.c @@ -123,7 +123,7 @@ static char *id_to_name[] = { static int timer32_config(struct timer_s *t) { u32 tcr; - struct davinci_soc_info *soc_info = davinci_get_soc_info(); + struct davinci_soc_info *soc_info = &davinci_soc_info; if (USING_COMPARE(t)) { struct davinci_timer_instance *dtip = -- cgit v1.2.3 From 96ed299fdb572fd694d361dc49285dddc0c87da4 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Thu, 30 Apr 2009 11:20:24 -0700 Subject: davinci: cleanup: move dm355 UART2 define to dm355.c Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/dm355.c | 2 ++ arch/arm/mach-davinci/include/mach/serial.h | 2 -- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index 78fc598b0bc..893d5ba21d5 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -34,6 +34,8 @@ #include "clock.h" #include "mux.h" +#define DM355_UART2_BASE (IO_PHYS + 0x206000) + /* * Device specific clocks */ diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/include/mach/serial.h index b0c57fa9e4e..794fa5cf93c 100644 --- a/arch/arm/mach-davinci/include/mach/serial.h +++ b/arch/arm/mach-davinci/include/mach/serial.h @@ -18,8 +18,6 @@ #define DAVINCI_UART1_BASE (IO_PHYS + 0x20400) #define DAVINCI_UART2_BASE (IO_PHYS + 0x20800) -#define DM355_UART2_BASE (IO_PHYS + 0x206000) - /* DaVinci UART register offsets */ #define UART_DAVINCI_PWREMU 0x0c #define UART_DM646X_SCR 0x10 -- cgit v1.2.3 From b79dbdefd2be0980c58b5e36fdc23eb14a7caab4 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Thu, 30 Apr 2009 17:33:27 -0700 Subject: davinci: remove remnants of IRAM allocator Remove remnants of dm6446-specific SRAM allocator, as preparation for a more generic replacement. Signed-off-by: David Brownell Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/include/mach/edma.h | 4 ---- arch/arm/mach-davinci/include/mach/memory.h | 1 - 2 files changed, 5 deletions(-) diff --git a/arch/arm/mach-davinci/include/mach/edma.h b/arch/arm/mach-davinci/include/mach/edma.h index f6fc5396daf..24a379239d7 100644 --- a/arch/arm/mach-davinci/include/mach/edma.h +++ b/arch/arm/mach-davinci/include/mach/edma.h @@ -208,10 +208,6 @@ void edma_clear_event(unsigned channel); void edma_pause(unsigned channel); void edma_resume(unsigned channel); -/* UNRELATED TO DMA */ -int davinci_alloc_iram(unsigned size); -void davinci_free_iram(unsigned addr, unsigned size); - /* platform_data for EDMA driver */ struct edma_soc_info { diff --git a/arch/arm/mach-davinci/include/mach/memory.h b/arch/arm/mach-davinci/include/mach/memory.h index 86c25c7f3ce..c712c7cdf38 100644 --- a/arch/arm/mach-davinci/include/mach/memory.h +++ b/arch/arm/mach-davinci/include/mach/memory.h @@ -21,7 +21,6 @@ * Definitions **************************************************************************/ #define DAVINCI_DDR_BASE 0x80000000 -#define DAVINCI_IRAM_BASE 0x00008000 /* ARM Internal RAM */ #define PHYS_OFFSET DAVINCI_DDR_BASE -- cgit v1.2.3 From 0d04eb47054f685b23033ed6ceadfb20db77c5b3 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Thu, 30 Apr 2009 17:35:48 -0700 Subject: davinci: soc-specific SRAM setup Package on-chip SRAM. It's always accessible from the ARM, so set up a standardized virtual address mapping into a 128 KiB area that's reserved for platform use. In some cases (dm6467) the physical addresses used for EDMA are not the same as the ones used by the ARM ... so record that info separately in the SOC data, for chips (unlike the OMAP-L137) where SRAM may be used with EDMA. Other blocks of SRAM, such as the ETB buffer or DSP L1/L2 RAM, may be unused/available on some system. They are ignored here. Signed-off-by: David Brownell Signed-off-by: Kevin Hilman --- arch/arm/mach-davinci/dm355.c | 9 +++++++++ arch/arm/mach-davinci/dm644x.c | 9 +++++++++ arch/arm/mach-davinci/dm646x.c | 9 +++++++++ arch/arm/mach-davinci/include/mach/common.h | 6 ++++++ 4 files changed, 33 insertions(+) diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index 893d5ba21d5..baaaf328de2 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -613,6 +613,13 @@ static struct map_desc dm355_io_desc[] = { .length = IO_SIZE, .type = MT_DEVICE }, + { + .virtual = SRAM_VIRT, + .pfn = __phys_to_pfn(0x00010000), + .length = SZ_32K, + /* MT_MEMORY_NONCACHED requires supersection alignment */ + .type = MT_DEVICE, + }, }; /* Contents of JTAG ID register used to identify exact cpu type */ @@ -702,6 +709,8 @@ static struct davinci_soc_info davinci_soc_info_dm355 = { .gpio_num = 104, .gpio_irq = IRQ_DM355_GPIOBNK0, .serial_dev = &dm355_serial_device, + .sram_dma = 0x00010000, + .sram_len = SZ_32K, }; void __init dm355_init(void) diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index 4ab5f07ead0..fb5449b3c97 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -539,6 +539,13 @@ static struct map_desc dm644x_io_desc[] = { .length = IO_SIZE, .type = MT_DEVICE }, + { + .virtual = SRAM_VIRT, + .pfn = __phys_to_pfn(0x00008000), + .length = SZ_16K, + /* MT_MEMORY_NONCACHED requires supersection alignment */ + .type = MT_DEVICE, + }, }; /* Contents of JTAG ID register used to identify exact cpu type */ @@ -629,6 +636,8 @@ static struct davinci_soc_info davinci_soc_info_dm644x = { .gpio_irq = IRQ_GPIOBNK0, .serial_dev = &dm644x_serial_device, .emac_pdata = &dm644x_emac_pdata, + .sram_dma = 0x00008000, + .sram_len = SZ_16K, }; void __init dm644x_init(void) diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index 12189c737a3..334f0711e0f 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -518,6 +518,13 @@ static struct map_desc dm646x_io_desc[] = { .length = IO_SIZE, .type = MT_DEVICE }, + { + .virtual = SRAM_VIRT, + .pfn = __phys_to_pfn(0x00010000), + .length = SZ_32K, + /* MT_MEMORY_NONCACHED requires supersection alignment */ + .type = MT_DEVICE, + }, }; /* Contents of JTAG ID register used to identify exact cpu type */ @@ -608,6 +615,8 @@ static struct davinci_soc_info davinci_soc_info_dm646x = { .gpio_irq = IRQ_DM646X_GPIOBNK0, .serial_dev = &dm646x_serial_device, .emac_pdata = &dm646x_emac_pdata, + .sram_dma = 0x10010000, + .sram_len = SZ_32K, }; void __init dm646x_init(void) diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h index 715528f0dbd..a1f03b606d8 100644 --- a/arch/arm/mach-davinci/include/mach/common.h +++ b/arch/arm/mach-davinci/include/mach/common.h @@ -66,10 +66,16 @@ struct davinci_soc_info { unsigned gpio_irq; struct platform_device *serial_dev; struct emac_platform_data *emac_pdata; + dma_addr_t sram_dma; + unsigned sram_len; }; extern struct davinci_soc_info davinci_soc_info; extern void davinci_common_init(struct davinci_soc_info *soc_info); +/* standard place to map on-chip SRAMs; they *may* support DMA */ +#define SRAM_VIRT 0xfffe0000 +#define SRAM_SIZE SZ_128K + #endif /* __ARCH_ARM_MACH_DAVINCI_COMMON_H */ -- cgit v1.2.3 From 20e9969b3aa5166d50c8df474967c9d80bf6d481 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Thu, 7 May 2009 09:31:42 -0700 Subject: davinci: add SRAM allocator Provide a generic SRAM allocator using genalloc, and vaguely modeled after what AVR32 uses. This builds on top of the static CPU mapping set up in the previous patch, and returns DMA mappings as requested (if possible). Compared to its OMAP cousin, there's no current support for (currently non-existent) DaVinci power management code running in SRAM; and this has ways to deallocate, instead of being allocate-only. The initial user of this should probably be the audio code, because EDMA from DDR is subject to various dropouts on at least DM355 and DM6446 chips. Signed-off-by: David Brownell Signed-off-by: Kevin Hilman --- arch/arm/Kconfig | 1 + arch/arm/mach-davinci/Makefile | 2 +- arch/arm/mach-davinci/include/mach/sram.h | 27 +++++++++++ arch/arm/mach-davinci/sram.c | 74 +++++++++++++++++++++++++++++++ 4 files changed, 103 insertions(+), 1 deletion(-) create mode 100644 arch/arm/mach-davinci/include/mach/sram.h create mode 100644 arch/arm/mach-davinci/sram.c diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 9d02cdb15b2..915b39382e6 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -587,6 +587,7 @@ config ARCH_DAVINCI select ZONE_DMA select HAVE_IDE select COMMON_CLKDEV + select GENERIC_ALLOCATOR help Support for TI's DaVinci platform. diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile index 5b62d8a4b18..059ab78084b 100644 --- a/arch/arm/mach-davinci/Makefile +++ b/arch/arm/mach-davinci/Makefile @@ -5,7 +5,7 @@ # Common objects obj-y := time.o clock.o serial.o io.o psc.o \ - gpio.o devices.o dma.o usb.o common.o + gpio.o devices.o dma.o usb.o common.o sram.o obj-$(CONFIG_DAVINCI_MUX) += mux.o diff --git a/arch/arm/mach-davinci/include/mach/sram.h b/arch/arm/mach-davinci/include/mach/sram.h new file mode 100644 index 00000000000..111f7cc71e0 --- /dev/null +++ b/arch/arm/mach-davinci/include/mach/sram.h @@ -0,0 +1,27 @@ +/* + * mach/sram.h - DaVinci simple SRAM allocator + * + * Copyright (C) 2009 David Brownell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __MACH_SRAM_H +#define __MACH_SRAM_H + +/* ARBITRARY: SRAM allocations are multiples of this 2^N size */ +#define SRAM_GRANULARITY 512 + +/* + * SRAM allocations return a CPU virtual address, or NULL on error. + * If a DMA address is requested and the SRAM supports DMA, its + * mapped address is also returned. + * + * Errors include SRAM memory not being available, and requesting + * DMA mapped SRAM on systems which don't allow that. + */ +extern void *sram_alloc(size_t len, dma_addr_t *dma); +extern void sram_free(void *addr, size_t len); + +#endif /* __MACH_SRAM_H */ diff --git a/arch/arm/mach-davinci/sram.c b/arch/arm/mach-davinci/sram.c new file mode 100644 index 00000000000..db54b2a66b4 --- /dev/null +++ b/arch/arm/mach-davinci/sram.c @@ -0,0 +1,74 @@ +/* + * mach-davinci/sram.c - DaVinci simple SRAM allocator + * + * Copyright (C) 2009 David Brownell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#include +#include +#include +#include + +#include +#include +#include + + +static struct gen_pool *sram_pool; + +void *sram_alloc(size_t len, dma_addr_t *dma) +{ + unsigned long vaddr; + dma_addr_t dma_base = davinci_soc_info.sram_dma; + + if (dma) + *dma = 0; + if (!sram_pool || (dma && !dma_base)) + return NULL; + + vaddr = gen_pool_alloc(sram_pool, len); + if (!vaddr) + return NULL; + + if (dma) + *dma = dma_base + (vaddr - SRAM_VIRT); + return (void *)vaddr; + +} +EXPORT_SYMBOL(sram_alloc); + +void sram_free(void *addr, size_t len) +{ + gen_pool_free(sram_pool, (unsigned long) addr, len); +} +EXPORT_SYMBOL(sram_free); + + +/* + * REVISIT This supports CPU and DMA access to/from SRAM, but it + * doesn't (yet?) support some other notable uses of SRAM: as TCM + * for data and/or instructions; and holding code needed to enter + * and exit suspend states (while DRAM can't be used). + */ +static int __init sram_init(void) +{ + unsigned len = davinci_soc_info.sram_len; + int status = 0; + + if (len) { + len = min(len, SRAM_SIZE); + sram_pool = gen_pool_create(ilog2(SRAM_GRANULARITY), -1); + if (!sram_pool) + status = -ENOMEM; + } + if (sram_pool) + status = gen_pool_add(sram_pool, SRAM_VIRT, len, -1); + WARN_ON(status < 0); + return status; +} +core_initcall(sram_init); + -- cgit v1.2.3 From 77bbca138c64cb80259732db6f70e1668123f2a7 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Tue, 26 May 2009 07:26:13 -0700 Subject: davinci: defconfig update: add EMAC DaVinci EMAC driver is now upstream. Enable it in default defconfig. Signed-off-by: Kevin Hilman --- arch/arm/configs/davinci_all_defconfig | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig index c371c653699..ac18662f38c 100644 --- a/arch/arm/configs/davinci_all_defconfig +++ b/arch/arm/configs/davinci_all_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc6 -# Wed May 20 17:45:58 2009 +# Linux kernel version: 2.6.30-rc7 +# Tue May 26 07:24:28 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -179,6 +179,7 @@ CONFIG_ARCH_DAVINCI=y # CONFIG_ARCH_OMAP is not set # CONFIG_ARCH_MSM is not set # CONFIG_ARCH_W90X900 is not set +CONFIG_AINTC=y # # TI DaVinci Implementations @@ -251,7 +252,7 @@ CONFIG_PREEMPT=y CONFIG_HZ=100 CONFIG_AEABI=y # CONFIG_OABI_COMPAT is not set -CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set # CONFIG_HIGHMEM is not set @@ -667,6 +668,7 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_AX88796 is not set # CONFIG_SMC91X is not set +CONFIG_TI_DAVINCI_EMAC=y CONFIG_DM9000=y CONFIG_DM9000_DEBUGLEVEL=4 # CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set @@ -1326,6 +1328,7 @@ CONFIG_MMC_BLOCK=m # MMC/SD/SDIO Host Controller Drivers # # CONFIG_MMC_SDHCI is not set +# CONFIG_MMC_DAVINCI is not set # CONFIG_MEMSTICK is not set # CONFIG_ACCESSIBILITY is not set CONFIG_NEW_LEDS=y @@ -1787,6 +1790,7 @@ CONFIG_CRC32=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m CONFIG_DECOMPRESS_GZIP=y +CONFIG_GENERIC_ALLOCATOR=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y -- cgit v1.2.3