From 50db9d8e4ca17974595e3848cb65f9371a304de4 Mon Sep 17 00:00:00 2001 From: Philippe De Muyter Date: Thu, 2 Apr 2009 16:58:53 -0700 Subject: parport: netmos 9845 & 9855 1P4S fixes netmos serial/parallel adapters come in different flavour differing only by the number of parallel and serial ports, which are encoded in the subdevice ID. Last fix of Christian Pellegrin for 9855 2P2S broke support for 9855 1P4S, and works only by side-effect for the first parallel port of a 2P2S, as this first parallel port is found by reading the second addr entry of (struct parport_pc_pci) cards[netmos_9855], which is not initialized, and hence has value 0, which happens to be the BAR of the first parallel port. netmos_9xx5_combo entry in (struct parport_pc_pci) cards[], which is used for a 9845 1P4S must also be fixed for the parallel port support when there are 4 serial ports because this entry currently gives 2 as BAR index for the parallel port. Actually, in this case, BAR 2 is the 3rd serial port while the parallel port is at BAR 4. I fixed 9845 1P4S and 9855 1P4S support, while preserving 9855 2P2S support, - by creating a netmos_9855_2p entry and using it for 9855 boards with 2 parallel ports : 9855 2P2S and 9855 2P0S boards, - and by allowing netmos_parallel_init to change not only the number of parallel ports (0 or 1), but making it also change the BAR index of the parallel port when the serial ports are before the parallel port. PS: the netmos_9855_2p entry in (struct pciserial_board) pci_parport_serial_boards[] is needed because netmos_parallel_init has no clean way to replace FL_BASE2 by FL_BASE4 in the description of the serial ports in function of the number of parallel ports on the card. Tested with 9845 1P4S, 9855 1P4S and 9855 2P2S boards. Signed-off-by: Philippe De Muyter Tested-by: Christian Pellegrin Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/parport/parport_serial.c | 30 +++++++++++++++++++++++++----- 1 file changed, 25 insertions(+), 5 deletions(-) diff --git a/drivers/parport/parport_serial.c b/drivers/parport/parport_serial.c index 032db815b0f..f3492110b1a 100644 --- a/drivers/parport/parport_serial.c +++ b/drivers/parport/parport_serial.c @@ -30,6 +30,7 @@ enum parport_pc_pci_cards { titan_210l, netmos_9xx5_combo, netmos_9855, + netmos_9855_2p, avlab_1s1p, avlab_1s2p, avlab_2s1p, @@ -62,7 +63,7 @@ struct parport_pc_pci { struct parport_pc_pci *card, int failed); }; -static int __devinit netmos_parallel_init(struct pci_dev *dev, struct parport_pc_pci *card, int autoirq, int autodma) +static int __devinit netmos_parallel_init(struct pci_dev *dev, struct parport_pc_pci *par, int autoirq, int autodma) { /* the rule described below doesn't hold for this device */ if (dev->device == PCI_DEVICE_ID_NETMOS_9835 && @@ -74,9 +75,17 @@ static int __devinit netmos_parallel_init(struct pci_dev *dev, struct parport_pc * and serial ports. The form is 0x00PS, where

is the number of * parallel ports and is the number of serial ports. */ - card->numports = (dev->subsystem_device & 0xf0) >> 4; - if (card->numports > ARRAY_SIZE(card->addr)) - card->numports = ARRAY_SIZE(card->addr); + par->numports = (dev->subsystem_device & 0xf0) >> 4; + if (par->numports > ARRAY_SIZE(par->addr)) + par->numports = ARRAY_SIZE(par->addr); + /* + * This function is currently only called for cards with up to + * one parallel port. + * Parallel port BAR is either before or after serial ports BARS; + * hence, lo should be either 0 or equal to the number of serial ports. + */ + if (par->addr[0].lo != 0) + par->addr[0].lo = dev->subsystem_device & 0xf; return 0; } @@ -84,7 +93,8 @@ static struct parport_pc_pci cards[] __devinitdata = { /* titan_110l */ { 1, { { 3, -1 }, } }, /* titan_210l */ { 1, { { 3, -1 }, } }, /* netmos_9xx5_combo */ { 1, { { 2, -1 }, }, netmos_parallel_init }, - /* netmos_9855 */ { 1, { { 2, -1 }, }, netmos_parallel_init }, + /* netmos_9855 */ { 1, { { 0, -1 }, }, netmos_parallel_init }, + /* netmos_9855_2p */ { 2, { { 0, -1 }, { 2, -1 }, } }, /* avlab_1s1p */ { 1, { { 1, 2}, } }, /* avlab_1s2p */ { 2, { { 1, 2}, { 3, 4 },} }, /* avlab_2s1p */ { 1, { { 2, 3}, } }, @@ -109,6 +119,10 @@ static struct pci_device_id parport_serial_pci_tbl[] = { PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9xx5_combo }, { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9845, PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9xx5_combo }, + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9855, + 0x1000, 0x0020, 0, 0, netmos_9855_2p }, + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9855, + 0x1000, 0x0022, 0, 0, netmos_9855_2p }, { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9855, PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9855 }, /* PCI_VENDOR_ID_AVLAB/Intek21 has another bunch of cards ...*/ @@ -192,6 +206,12 @@ static struct pciserial_board pci_parport_serial_boards[] __devinitdata = { .uart_offset = 8, }, [netmos_9855] = { + .flags = FL_BASE2 | FL_BASE_BARS, + .num_ports = 1, + .base_baud = 115200, + .uart_offset = 8, + }, + [netmos_9855_2p] = { .flags = FL_BASE4 | FL_BASE_BARS, .num_ports = 1, .base_baud = 115200, -- cgit v1.2.3