From 559fb51ba7e66fe298b8355fabde1275b7def35f Mon Sep 17 00:00:00 2001 From: Scott Bardone Date: Thu, 23 Jun 2005 01:40:19 -0400 Subject: Update Chelsio gige net driver. - Use extern prefix for functions required. - Removed a lot of wrappers, including t1_read/write_reg_4. - Removed various macros, using native kernel calls now. - Enumerated various #defines. - Removed a lot of shared code which is not currently used in "NIC only" mode. - Removed dead code. Documentation/networking/cxgb.txt: - Updated release notes for version 2.1.1 drivers/net/chelsio/ch_ethtool.h - removed file, no longer using ETHTOOL namespace. drivers/net/chelsio/common.h - moved code from osdep.h to common.h - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/cphy.h - removed dead code. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/cxgb2.c - use DMA_{32,64}BIT_MASK in include/linux/dma-mapping.h. - removed unused code. - use printk message for link info resembling drivers/net/mii.c. - no longer using the MODULE_xxx namespace. - no longer using "pci_" namespace. - no longer using ETHTOOL namespace. drivers/net/chelsio/cxgb2.h - removed file, merged into common.h drivers/net/chelsio/elmer0.h - removed dead code. - added various enums. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/espi.c - removed various macros, using native kernel calls now. - removed a lot of wrappers, including t1_read/write_reg_4. drivers/net/chelsio/espi.h - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/gmac.h - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/mv88x201x.c - changes to sync with Chelsio TOT. drivers/net/chelsio/osdep.h - removed file, consolidation. osdep was used to translate wrapper functions since our code supports multiple OSs. removed wrappers. drivers/net/chelsio/pm3393.c - removed various macros, using native kernel calls now. - removed a lot of wrappers, including t1_read/write_reg_4. - removed unused code. drivers/net/chelsio/regs.h - added a few register entries for future and current feature support. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/sge.c - rewrote large portion of scatter-gather engine to stabilize performance. - using u8/u16/u32 kernel types instead of __u8/__u16/__u32 compiler types. drivers/net/chelsio/sge.h - rewrote large portion of scatter-gather engine to stabilize performance. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/subr.c - merged tp.c into subr.c - removed various macros, using native kernel calls now. - removed a lot of wrappers, including t1_read/write_reg_4. - removed unused code. drivers/net/chelsio/suni1x10gexp_regs.h - modified copyright and authorship of file. - added comment to #endif indicating which symbol it closes. drivers/net/chelsio/tp.c - removed file, merged into subr.c. drivers/net/chelsio/tp.h - removed file. include/linux/pci_ids.h - patched to include PCI_VENDOR_ID_CHELSIO 0x1425, removed define from our code. --- Documentation/networking/cxgb.txt | 72 +- drivers/net/chelsio/Makefile | 3 +- drivers/net/chelsio/ch_ethtool.h | 102 -- drivers/net/chelsio/common.h | 259 +++-- drivers/net/chelsio/cphy.h | 14 +- drivers/net/chelsio/cpl5_cmd.h | 118 +- drivers/net/chelsio/cxgb2.c | 537 ++++----- drivers/net/chelsio/cxgb2.h | 122 -- drivers/net/chelsio/elmer0.h | 16 +- drivers/net/chelsio/espi.c | 168 ++- drivers/net/chelsio/espi.h | 11 +- drivers/net/chelsio/gmac.h | 11 +- drivers/net/chelsio/mv88x201x.c | 36 +- drivers/net/chelsio/osdep.h | 169 --- drivers/net/chelsio/pm3393.c | 45 +- drivers/net/chelsio/regs.h | 21 +- drivers/net/chelsio/sge.c | 1859 +++++++++++++++++-------------- drivers/net/chelsio/sge.h | 48 +- drivers/net/chelsio/subr.c | 235 ++-- drivers/net/chelsio/suni1x10gexp_regs.h | 20 +- drivers/net/chelsio/tp.c | 188 ---- drivers/net/chelsio/tp.h | 110 -- include/linux/pci_ids.h | 1 + 23 files changed, 1882 insertions(+), 2283 deletions(-) delete mode 100644 drivers/net/chelsio/ch_ethtool.h delete mode 100644 drivers/net/chelsio/cxgb2.h delete mode 100644 drivers/net/chelsio/osdep.h delete mode 100644 drivers/net/chelsio/tp.c delete mode 100644 drivers/net/chelsio/tp.h diff --git a/Documentation/networking/cxgb.txt b/Documentation/networking/cxgb.txt index 9f2eb646c6f..76324638626 100644 --- a/Documentation/networking/cxgb.txt +++ b/Documentation/networking/cxgb.txt @@ -2,9 +2,9 @@ Driver Release Notes for Linux - Version 2.1.0 + Version 2.1.1 - March 8, 2005 + June 20, 2005 CONTENTS ======== @@ -21,8 +21,7 @@ INTRODUCTION This document describes the Linux driver for Chelsio 10Gb Ethernet Network Controller. This driver supports the Chelsio N210 NIC and is backward - compatible with the Chelsio N110 model 10Gb NICs. This driver supports AMD64 - and EM64T, and x86 systems. + compatible with the Chelsio N110 model 10Gb NICs. FEATURES @@ -121,23 +120,17 @@ PERFORMANCE Disabling SACK: sysctl -w net.ipv4.tcp_sack=0 - Setting TCP read buffers (min/default/max): - sysctl -w net.ipv4.tcp_rmem="10000000 10000000 10000000" - - Setting TCP write buffers (min/pressure/max): - sysctl -w net.ipv4.tcp_wmem="10000000 10000000 10000000" - - Setting TCP buffer space (min/pressure/max): - sysctl -w net.ipv4.tcp_mem="10000000 10000000 10000000" - - Setting large number of incoming connection requests (2.6.x only): + Setting large number of incoming connection requests: sysctl -w net.ipv4.tcp_max_syn_backlog=3000 Setting maximum receive socket buffer size: - sysctl -w net.core.rmem_max=524287 + sysctl -w net.core.rmem_max=1024000 Setting maximum send socket buffer size: - sysctl -w net.core.wmem_max=524287 + sysctl -w net.core.wmem_max=1024000 + + Set smp_affinity (on a multiprocessor system) to a single CPU: + echo 1 > /proc/irq//smp_affinity Setting default receive socket buffer size: sysctl -w net.core.rmem_default=524287 @@ -151,8 +144,14 @@ PERFORMANCE Setting maximum backlog (# of unprocessed packets before kernel drops): sysctl -w net.core.netdev_max_backlog=300000 - Set smp_affinity (on a multiprocessor system) to a single CPU: - echo 00000001 > /proc/irq//smp_affinity + Setting TCP read buffers (min/default/max): + sysctl -w net.ipv4.tcp_rmem="10000000 10000000 10000000" + + Setting TCP write buffers (min/pressure/max): + sysctl -w net.ipv4.tcp_wmem="10000000 10000000 10000000" + + Setting TCP buffer space (min/pressure/max): + sysctl -w net.ipv4.tcp_mem="10000000 10000000 10000000" TCP window size for single connections: The receive buffer (RX_WINDOW) size must be at least as large as the @@ -186,7 +185,7 @@ DRIVER MESSAGES may be found in /var/log/messages. Driver up: - Chelsio Network Driver - version 2.1.0 + Chelsio Network Driver - version 2.1.1 NIC detected: eth#: Chelsio N210 1x10GBaseX NIC (rev #), PCIX 133MHz/64-bit @@ -282,13 +281,44 @@ KNOWN ISSUES the number of outstanding transactions, via BIOS configuration programming of the PCI-X card, to the following: - Data Length (bytes): 2k - Total allowed outstanding transactions: 1 + Data Length (bytes): 1k + Total allowed outstanding transactions: 2 Please refer to AMD 8131-HT/PCI-X Errata 26310 Rev 3.08 August 2004, section 56, "133-MHz Mode Split Completion Data Corruption" for more details with this bug and workarounds suggested by AMD. + It may be possible to work outside AMD's recommended PCI-X settings, try + increasing the Data Length to 2k bytes for increased performance. If you + have issues with these settings, please revert to the "safe" settings + and duplicate the problem before submitting a bug or asking for support. + + NOTE: The default setting on most systems is 8 outstanding transactions + and 2k bytes data length. + + 4. On multiprocessor systems, it has been noted that an application which + is handling 10Gb networking can switch between CPUs causing degraded + and/or unstable performance. + + If running on an SMP system and taking performance measurements, it + is suggested you either run the latest netperf-2.4.0+ or use a binding + tool such as Tim Hockin's procstate utilities (runon) + . + + Binding netserver and netperf (or other applications) to particular + CPUs will have a significant difference in performance measurements. + You may need to experiment which CPU to bind the application to in + order to achieve the best performance for your system. + + If you are developing an application designed for 10Gb networking, + please keep in mind you may want to look at kernel functions + sched_setaffinity & sched_getaffinity to bind your application. + + If you are just running user-space applications such as ftp, telnet, + etc., you may want to try the runon tool provided by Tim Hockin's + procstate utility. You could also try binding the interface to a + particular CPU: runon 0 ifup eth0 + SUPPORT ======= diff --git a/drivers/net/chelsio/Makefile b/drivers/net/chelsio/Makefile index ff8c11b3a4e..91e927827c4 100644 --- a/drivers/net/chelsio/Makefile +++ b/drivers/net/chelsio/Makefile @@ -7,6 +7,5 @@ obj-$(CONFIG_CHELSIO_T1) += cxgb.o EXTRA_CFLAGS += -I$(TOPDIR)/drivers/net/chelsio $(DEBUG_FLAGS) -cxgb-objs := cxgb2.o espi.o tp.o pm3393.o sge.o subr.o mv88x201x.o - +cxgb-objs := cxgb2.o espi.o pm3393.o sge.o subr.o mv88x201x.o diff --git a/drivers/net/chelsio/ch_ethtool.h b/drivers/net/chelsio/ch_ethtool.h deleted file mode 100644 index c523d24836b..00000000000 --- a/drivers/net/chelsio/ch_ethtool.h +++ /dev/null @@ -1,102 +0,0 @@ -/***************************************************************************** - * * - * File: ch_ethtool.h * - * $Revision: 1.5 $ * - * $Date: 2005/03/23 07:15:58 $ * - * Description: * - * part of the Chelsio 10Gb Ethernet Driver. * - * * - * This program is free software; you can redistribute it and/or modify * - * it under the terms of the GNU General Public License, version 2, as * - * published by the Free Software Foundation. * - * * - * You should have received a copy of the GNU General Public License along * - * with this program; if not, write to the Free Software Foundation, Inc., * - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * - * * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * - * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * - * * - * http://www.chelsio.com * - * * - * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * - * All rights reserved. * - * * - * Maintainers: maintainers@chelsio.com * - * * - * Authors: Dimitrios Michailidis * - * Tina Yang * - * Felix Marti * - * Scott Bardone * - * Kurt Ottaway * - * Frank DiMambro * - * * - * History: * - * * - ****************************************************************************/ - -#ifndef __CHETHTOOL_LINUX_H__ -#define __CHETHTOOL_LINUX_H__ - -/* TCB size in 32-bit words */ -#define TCB_WORDS (TCB_SIZE / 4) - -enum { - ETHTOOL_SETREG, - ETHTOOL_GETREG, - ETHTOOL_SETTPI, - ETHTOOL_GETTPI, - ETHTOOL_DEVUP, - ETHTOOL_GETMTUTAB, - ETHTOOL_SETMTUTAB, - ETHTOOL_GETMTU, - ETHTOOL_SET_PM, - ETHTOOL_GET_PM, - ETHTOOL_GET_TCAM, - ETHTOOL_SET_TCAM, - ETHTOOL_GET_TCB, - ETHTOOL_READ_TCAM_WORD, -}; - -struct ethtool_reg { - uint32_t cmd; - uint32_t addr; - uint32_t val; -}; - -struct ethtool_mtus { - uint32_t cmd; - uint16_t mtus[NMTUS]; -}; - -struct ethtool_pm { - uint32_t cmd; - uint32_t tx_pg_sz; - uint32_t tx_num_pg; - uint32_t rx_pg_sz; - uint32_t rx_num_pg; - uint32_t pm_total; -}; - -struct ethtool_tcam { - uint32_t cmd; - uint32_t tcam_size; - uint32_t nservers; - uint32_t nroutes; -}; - -struct ethtool_tcb { - uint32_t cmd; - uint32_t tcb_index; - uint32_t tcb_data[TCB_WORDS]; -}; - -struct ethtool_tcam_word { - uint32_t cmd; - uint32_t addr; - uint32_t buf[3]; -}; - -#define SIOCCHETHTOOL SIOCDEVPRIVATE -#endif diff --git a/drivers/net/chelsio/common.h b/drivers/net/chelsio/common.h index 017684ff48d..f09348802b4 100644 --- a/drivers/net/chelsio/common.h +++ b/drivers/net/chelsio/common.h @@ -1,8 +1,8 @@ /***************************************************************************** * * * File: common.h * - * $Revision: 1.5 $ * - * $Date: 2005/03/23 07:41:27 $ * + * $Revision: 1.21 $ * + * $Date: 2005/06/22 00:43:25 $ * * Description: * * part of the Chelsio 10Gb Ethernet Driver. * * * @@ -36,74 +36,101 @@ * * ****************************************************************************/ -#ifndef CHELSIO_COMMON_H -#define CHELSIO_COMMON_H +#ifndef _CXGB_COMMON_H_ +#define _CXGB_COMMON_H_ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_DESCRIPTION "Chelsio 10Gb Ethernet Driver" +#define DRV_NAME "cxgb" +#define DRV_VERSION "2.1.1" +#define PFX DRV_NAME ": " + +#define CH_ERR(fmt, ...) printk(KERN_ERR PFX fmt, ## __VA_ARGS__) +#define CH_WARN(fmt, ...) printk(KERN_WARNING PFX fmt, ## __VA_ARGS__) +#define CH_ALERT(fmt, ...) printk(KERN_ALERT PFX fmt, ## __VA_ARGS__) + +#define CH_DEVICE(devid, ssid, idx) \ + { PCI_VENDOR_ID_CHELSIO, devid, PCI_ANY_ID, ssid, 0, 0, idx } + +#define SUPPORTED_PAUSE (1 << 13) +#define SUPPORTED_LOOPBACK (1 << 15) + +#define ADVERTISED_PAUSE (1 << 13) +#define ADVERTISED_ASYM_PAUSE (1 << 14) + +typedef struct adapter adapter_t; + +void t1_elmer0_ext_intr(adapter_t *adapter); +void t1_link_changed(adapter_t *adapter, int port_id, int link_status, + int speed, int duplex, int fc); + +struct t1_rx_mode { + struct net_device *dev; + u32 idx; + struct dev_mc_list *list; +}; + +#define t1_rx_mode_promisc(rm) (rm->dev->flags & IFF_PROMISC) +#define t1_rx_mode_allmulti(rm) (rm->dev->flags & IFF_ALLMULTI) +#define t1_rx_mode_mc_cnt(rm) (rm->dev->mc_count) + +static inline u8 *t1_get_next_mcaddr(struct t1_rx_mode *rm) +{ + u8 *addr = 0; -#define DIMOF(x) (sizeof(x)/sizeof(x[0])) + if (rm->idx++ < rm->dev->mc_count) { + addr = rm->list->dmi_addr; + rm->list = rm->list->next; + } + return addr; +} + +#define MAX_NPORTS 4 -#define NMTUS 8 -#define MAX_NPORTS 4 -#define TCB_SIZE 128 +#define SPEED_INVALID 0xffff +#define DUPLEX_INVALID 0xff enum { - CHBT_BOARD_7500, - CHBT_BOARD_8000, - CHBT_BOARD_CHT101, - CHBT_BOARD_CHT110, - CHBT_BOARD_CHT210, - CHBT_BOARD_CHT204, CHBT_BOARD_N110, - CHBT_BOARD_N210, - CHBT_BOARD_COUGAR, - CHBT_BOARD_6800, - CHBT_BOARD_SIMUL + CHBT_BOARD_N210 }; enum { - CHBT_TERM_FPGA, CHBT_TERM_T1, - CHBT_TERM_T2, - CHBT_TERM_T3 + CHBT_TERM_T2 }; enum { - CHBT_MAC_CHELSIO_A, - CHBT_MAC_IXF1010, CHBT_MAC_PM3393, - CHBT_MAC_VSC7321, - CHBT_MAC_DUMMY }; enum { - CHBT_PHY_88E1041, - CHBT_PHY_88E1111, CHBT_PHY_88X2010, - CHBT_PHY_XPAK, - CHBT_PHY_MY3126, - CHBT_PHY_DUMMY }; enum { - PAUSE_RX = 1, - PAUSE_TX = 2, - PAUSE_AUTONEG = 4 + PAUSE_RX = 1 << 0, + PAUSE_TX = 1 << 1, + PAUSE_AUTONEG = 1 << 2 }; /* Revisions of T1 chip */ -#define TERM_T1A 0 -#define TERM_T1B 1 -#define TERM_T2 3 - -struct tp_params { - unsigned int pm_size; - unsigned int cm_size; - unsigned int pm_rx_base; - unsigned int pm_tx_base; - unsigned int pm_rx_pg_size; - unsigned int pm_tx_pg_size; - unsigned int pm_rx_num_pgs; - unsigned int pm_tx_num_pgs; - unsigned int use_5tuple_mode; +enum { + TERM_T1A = 0, + TERM_T1B = 1, + TERM_T2 = 3 }; struct sge_params { @@ -118,17 +145,7 @@ struct sge_params { unsigned int polling; }; -struct mc5_params { - unsigned int mode; /* selects MC5 width */ - unsigned int nservers; /* size of server region */ - unsigned int nroutes; /* size of routing region */ -}; - -/* Default MC5 region sizes */ -#define DEFAULT_SERVER_REGION_LEN 256 -#define DEFAULT_RT_REGION_LEN 1024 - -struct pci_params { +struct chelsio_pci_params { unsigned short speed; unsigned char width; unsigned char is_pcix; @@ -136,31 +153,14 @@ struct pci_params { struct adapter_params { struct sge_params sge; - struct mc5_params mc5; - struct tp_params tp; - struct pci_params pci; + struct chelsio_pci_params pci; const struct board_info *brd_info; - unsigned short mtus[NMTUS]; - unsigned int nports; /* # of ethernet ports */ + unsigned int nports; /* # of ethernet ports */ unsigned int stats_update_period; unsigned short chip_revision; unsigned char chip_version; - unsigned char is_asic; -}; - -struct pci_err_cnt { - unsigned int master_parity_err; - unsigned int sig_target_abort; - unsigned int rcv_target_abort; - unsigned int rcv_master_abort; - unsigned int sig_sys_err; - unsigned int det_parity_err; - unsigned int pio_parity_err; - unsigned int wf_parity_err; - unsigned int rf_parity_err; - unsigned int cf_parity_err; }; struct link_config { @@ -175,8 +175,60 @@ struct link_config { unsigned char autoneg; /* autonegotiating? */ }; -#define SPEED_INVALID 0xffff -#define DUPLEX_INVALID 0xff +struct cmac; +struct cphy; + +struct port_info { + struct net_device *dev; + struct cmac *mac; + struct cphy *phy; + struct link_config link_config; + struct net_device_stats netstats; +}; + +struct sge; +struct peespi; + +struct adapter { + u8 *regs; + struct pci_dev *pdev; + unsigned long registered_device_map; + unsigned long open_device_map; + unsigned long flags; + + const char *name; + int msg_enable; + u32 mmio_len; + + struct work_struct ext_intr_handler_task; + struct adapter_params params; + + struct vlan_group *vlan_grp; + + /* Terminator modules. */ + struct sge *sge; + struct peespi *espi; + + struct port_info port[MAX_NPORTS]; + struct work_struct stats_update_task; + struct timer_list stats_update_timer; + + struct semaphore mib_mutex; + spinlock_t tpi_lock; + spinlock_t work_lock; + /* guards async operations */ + spinlock_t async_lock ____cacheline_aligned; + u32 slow_intr_mask; +}; + +enum { /* adapter flags */ + FULL_INIT_DONE = 1 << 0, + TSO_CAPABLE = 1 << 2, + TCP_CSUM_CAPABLE = 1 << 3, + UDP_CSUM_CAPABLE = 1 << 4, + VLAN_ACCEL_CAPABLE = 1 << 5, + RX_CSUM_ENABLED = 1 << 6, +}; struct mdio_ops; struct gmac; @@ -205,19 +257,8 @@ struct board_info { const char *desc; }; -#include "osdep.h" - -#ifndef PCI_VENDOR_ID_CHELSIO -#define PCI_VENDOR_ID_CHELSIO 0x1425 -#endif - extern struct pci_device_id t1_pci_tbl[]; -static inline int t1_is_asic(const adapter_t *adapter) -{ - return adapter->params.is_asic; -} - static inline int adapter_matches_type(const adapter_t *adapter, int version, int revision) { @@ -245,25 +286,29 @@ static inline unsigned int core_ticks_per_usec(const adapter_t *adap) return board_info(adap)->clock_core / 1000000; } -int t1_tpi_write(adapter_t *adapter, u32 addr, u32 value); -int t1_tpi_read(adapter_t *adapter, u32 addr, u32 *value); +extern int t1_tpi_write(adapter_t *adapter, u32 addr, u32 value); +extern int t1_tpi_read(adapter_t *adapter, u32 addr, u32 *value); -void t1_interrupts_enable(adapter_t *adapter); -void t1_interrupts_disable(adapter_t *adapter); -void t1_interrupts_clear(adapter_t *adapter); -int elmer0_ext_intr_handler(adapter_t *adapter); -int t1_slow_intr_handler(adapter_t *adapter); +extern void t1_interrupts_enable(adapter_t *adapter); +extern void t1_interrupts_disable(adapter_t *adapter); +extern void t1_interrupts_clear(adapter_t *adapter); +extern int elmer0_ext_intr_handler(adapter_t *adapter); +extern int t1_slow_intr_handler(adapter_t *adapter); -int t1_link_start(struct cphy *phy, struct cmac *mac, struct link_config *lc); -const struct board_info *t1_get_board_info(unsigned int board_id); -const struct board_info *t1_get_board_info_from_ids(unsigned int devid, +extern int t1_link_start(struct cphy *phy, struct cmac *mac, struct link_config *lc); +extern const struct board_info *t1_get_board_info(unsigned int board_id); +extern const struct board_info *t1_get_board_info_from_ids(unsigned int devid, unsigned short ssid); -int t1_seeprom_read(adapter_t *adapter, u32 addr, u32 *data); -int t1_get_board_rev(adapter_t *adapter, const struct board_info *bi, +extern int t1_seeprom_read(adapter_t *adapter, u32 addr, u32 *data); +extern int t1_get_board_rev(adapter_t *adapter, const struct board_info *bi, struct adapter_params *p); -int t1_init_hw_modules(adapter_t *adapter); -int t1_init_sw_modules(adapter_t *adapter, const struct board_info *bi); -void t1_free_sw_modules(adapter_t *adapter); -void t1_fatal_err(adapter_t *adapter); -#endif +extern int t1_init_hw_modules(adapter_t *adapter); +extern int t1_init_sw_modules(adapter_t *adapter, const struct board_info *bi); +extern void t1_free_sw_modules(adapter_t *adapter); +extern void t1_fatal_err(adapter_t *adapter); + +extern void t1_tp_set_udp_checksum_offload(adapter_t *adapter, int enable); +extern void t1_tp_set_tcp_checksum_offload(adapter_t *adapter, int enable); +extern void t1_tp_set_ip_checksum_offload(adapter_t *adapter, int enable); +#endif /* _CXGB_COMMON_H_ */ diff --git a/drivers/net/chelsio/cphy.h b/drivers/net/chelsio/cphy.h index 1bc2248264c..3412342f734 100644 --- a/drivers/net/chelsio/cphy.h +++ b/drivers/net/chelsio/cphy.h @@ -1,8 +1,8 @@ /***************************************************************************** * * * File: cphy.h * - * $Revision: 1.4 $ * - * $Date: 2005/03/23 07:41:27 $ * + * $Revision: 1.7 $ * + * $Date: 2005/06/21 18:29:47 $ * * Description: * * part of the Chelsio 10Gb Ethernet Driver. * * * @@ -36,8 +36,8 @@ * * ****************************************************************************/ -#ifndef CHELSIO_CPHY_H -#define CHELSIO_CPHY_H +#ifndef _CXGB_CPHY_H_ +#define _CXGB_CPHY_H_ #include "common.h" @@ -142,9 +142,7 @@ struct gphy { int (*reset)(adapter_t *adapter); }; -extern struct gphy t1_my3126_ops; -extern struct gphy t1_mv88e1xxx_ops; -extern struct gphy t1_xpak_ops; extern struct gphy t1_mv88x201x_ops; extern struct gphy t1_dummy_phy_ops; -#endif + +#endif /* _CXGB_CPHY_H_ */ diff --git a/drivers/net/chelsio/cpl5_cmd.h b/drivers/net/chelsio/cpl5_cmd.h index 45e9248979f..27925e487bc 100644 --- a/drivers/net/chelsio/cpl5_cmd.h +++ b/drivers/net/chelsio/cpl5_cmd.h @@ -1,8 +1,8 @@ /***************************************************************************** * * * File: cpl5_cmd.h * - * $Revision: 1.4 $ * - * $Date: 2005/03/23 07:15:58 $ * + * $Revision: 1.6 $ * + * $Date: 2005/06/21 18:29:47 $ * * Description: * * part of the Chelsio 10Gb Ethernet Driver. * * * @@ -36,8 +36,8 @@ * * ****************************************************************************/ -#ifndef _CPL5_CMD_H -#define _CPL5_CMD_H +#ifndef _CXGB_CPL5_CMD_H_ +#define _CXGB_CPL5_CMD_H_ #include @@ -59,12 +59,12 @@ enum { /* TX_PKT_LSO ethernet types */ }; struct cpl_rx_data { - __u32 rsvd0; - __u32 len; - __u32 seq; - __u16 urg; - __u8 rsvd1; - __u8 status; + u32 rsvd0; + u32 len; + u32 seq; + u16 urg; + u8 rsvd1; + u8 status; }; /* @@ -73,73 +73,73 @@ struct cpl_rx_data { * used so we break it into 2 16-bit parts to easily meet our alignment needs. */ struct cpl_tx_pkt { - __u8 opcode; + u8 opcode; #if defined(__LITTLE_ENDIAN_BITFIELD) - __u8 iff:4; - __u8 ip_csum_dis:1; - __u8 l4_csum_dis:1; - __u8 vlan_valid:1; - __u8 rsvd:1; + u8 iff:4; + u8 ip_csum_dis:1; + u8 l4_csum_dis:1; + u8 vlan_valid:1; + u8 rsvd:1; #else - __u8 rsvd:1; - __u8 vlan_valid:1; - __u8 l4_csum_dis:1; - __u8 ip_csum_dis:1; - __u8 iff:4; + u8 rsvd:1; + u8 vlan_valid:1; + u8 l4_csum_dis:1; + u8 ip_csum_dis:1; + u8 iff:4; #endif - __u16 vlan; - __u16 len_hi; - __u16 len_lo; + u16 vlan; + u16 len_hi; + u16 len_lo; }; struct cpl_tx_pkt_lso { - __u8 opcode; + u8 opcode; #if defined(__LITTLE_ENDIAN_BITFIELD) - __u8 iff:4; - __u8 ip_csum_dis:1; - __u8 l4_csum_dis:1; - __u8 vlan_valid:1; - __u8 rsvd:1; + u8 iff:4; + u8 ip_csum_dis:1; + u8 l4_csum_dis:1; + u8 vlan_valid:1; + u8 rsvd:1; #else - __u8 rsvd:1; - __u8 vlan_valid:1; - __u8 l4_csum_dis:1; - __u8 ip_csum_dis:1; - __u8 iff:4; + u8 rsvd:1; + u8 vlan_valid:1; + u8 l4_csum_dis:1; + u8 ip_csum_dis:1; + u8 iff:4; #endif - __u16 vlan; - __u32 len; + u16 vlan; + u32 len; - __u32 rsvd2; - __u8 rsvd3; + u32 rsvd2; + u8 rsvd3; #if defined(__LITTLE_ENDIAN_BITFIELD) - __u8 tcp_hdr_words:4; - __u8 ip_hdr_words:4; + u8 tcp_hdr_words:4; + u8 ip_hdr_words:4; #else - __u8 ip_hdr_words:4; - __u8 tcp_hdr_words:4; + u8 ip_hdr_words:4; + u8 tcp_hdr_words:4; #endif - __u16 eth_type_mss; + u16 eth_type_mss; }; struct cpl_rx_pkt { - __u8 opcode; + u8 opcode; #if defined(__LITTLE_ENDIAN_BITFIELD) - __u8 iff:4; - __u8 csum_valid:1; - __u8 bad_pkt:1; - __u8 vlan_valid:1; - __u8 rsvd:1; + u8 iff:4; + u8 csum_valid:1; + u8 bad_pkt:1; + u8 vlan_valid:1; + u8 rsvd:1; #else - __u8 rsvd:1; - __u8 vlan_valid:1; - __u8 bad_pkt:1; - __u8 csum_valid:1; - __u8 iff:4; + u8 rsvd:1; + u8 vlan_valid:1; + u8 bad_pkt:1; + u8 csum_valid:1; + u8 iff:4; #endif - __u16 csum; - __u16 vlan; - __u16 len; + u16 csum; + u16 vlan; + u16 len; }; -#endif +#endif /* _CXGB_CPL5_CMD_H_ */ diff --git a/drivers/net/chelsio/cxgb2.c b/drivers/net/chelsio/cxgb2.c index 48c4d5acfcd..28ae478b386 100644 --- a/drivers/net/chelsio/cxgb2.c +++ b/drivers/net/chelsio/cxgb2.c @@ -1,8 +1,8 @@ /***************************************************************************** * * * File: cxgb2.c * - * $Revision: 1.11 $ * - * $Date: 2005/03/23 07:41:27 $ * + * $Revision: 1.25 $ * + * $Date: 2005/06/22 00:43:25 $ * * Description: * * Chelsio 10Gb Ethernet Driver. * * * @@ -37,7 +37,6 @@ ****************************************************************************/ #include "common.h" - #include #include #include @@ -48,44 +47,56 @@ #include #include #include -#include -#include +#include #include -#include "ch_ethtool.h" #include "cpl5_cmd.h" #include "regs.h" #include "gmac.h" #include "cphy.h" #include "sge.h" -#include "tp.h" #include "espi.h" +#ifdef work_struct +#include +#define INIT_WORK INIT_TQUEUE +#define schedule_work schedule_task +#define flush_scheduled_work flush_scheduled_tasks + static inline void schedule_mac_stats_update(struct adapter *ap, int secs) { - schedule_delayed_work(&ap->stats_update_task, secs * HZ); + mod_timer(&ap->stats_update_timer, jiffies + secs * HZ); } static inline void cancel_mac_stats_update(struct adapter *ap) { - cancel_delayed_work(&ap->stats_update_task); + del_timer_sync(&ap->stats_update_timer); + flush_scheduled_tasks(); } -#if BITS_PER_LONG == 64 && !defined(CONFIG_X86_64) -# define FMT64 "l" -#else -# define FMT64 "ll" -#endif +/* + * Stats update timer for 2.4. It schedules a task to do the actual update as + * we need to access MAC statistics in process context. + */ +static void mac_stats_timer(unsigned long data) +{ + struct adapter *ap = (struct adapter *)data; -# define DRV_TYPE "" -# define MODULE_DESC "Chelsio Network Driver" + schedule_task(&ap->stats_update_task); +} +#else +#include -static char driver_name[] = DRV_NAME; -static char driver_string[] = "Chelsio " DRV_TYPE "Network Driver"; -static char driver_version[] = "2.1.0"; +static inline void schedule_mac_stats_update(struct adapter *ap, int secs) +{ + schedule_delayed_work(&ap->stats_update_task, secs * HZ); +} -#define PCI_DMA_64BIT ~0ULL -#define PCI_DMA_32BIT 0xffffffffULL +static inline void cancel_mac_stats_update(struct adapter *ap) +{ + cancel_delayed_work(&ap->stats_update_task); +} +#endif #define MAX_CMDQ_ENTRIES 16384 #define MAX_CMDQ1_ENTRIES 1024 @@ -107,10 +118,9 @@ static char driver_version[] = "2.1.0"; */ #define EEPROM_SIZE 32 -MODULE_DESCRIPTION(MODULE_DESC); +MODULE_DESCRIPTION(DRV_DESCRIPTION); MODULE_AUTHOR("Chelsio Communications"); MODULE_LICENSE("GPL"); -MODULE_DEVICE_TABLE(pci, t1_pci_tbl); static int dflt_msg_enable = DFLT_MSG_ENABLE; @@ -140,17 +150,17 @@ static void t1_set_rxmode(struct net_device *dev) static void link_report(struct port_info *p) { if (!netif_carrier_ok(p->dev)) - printk(KERN_INFO "%s: link is down\n", p->dev->name); + printk(KERN_INFO "%s: link down\n", p->dev->name); else { - const char *s = "10 Mbps"; + const char *s = "10Mbps"; switch (p->link_config.speed) { - case SPEED_10000: s = "10 Gbps"; break; - case SPEED_1000: s = "1000 Mbps"; break; - case SPEED_100: s = "100 Mbps"; break; + case SPEED_10000: s = "10Gbps"; break; + case SPEED_1000: s = "1000Mbps"; break; + case SPEED_100: s = "100Mbps"; break; } - printk(KERN_INFO "%s: link is up at %s, %s duplex\n", + printk(KERN_INFO "%s: link up, %s, %s-duplex\n", p->dev->name, s, p->link_config.duplex == DUPLEX_FULL ? "full" : "half"); } @@ -186,10 +196,8 @@ static void link_start(struct port_info *p) static void enable_hw_csum(struct adapter *adapter) { if (adapter->flags & TSO_CAPABLE) - t1_tp_set_ip_checksum_offload(adapter->tp, 1); /* for TSO only */ - if (adapter->flags & UDP_CSUM_CAPABLE) - t1_tp_set_udp_checksum_offload(adapter->tp, 1); - t1_tp_set_tcp_checksum_offload(adapter->tp, 1); + t1_tp_set_ip_checksum_offload(adapter, 1); /* for TSO only */ + t1_tp_set_tcp_checksum_offload(adapter, 1); } /* @@ -210,15 +218,13 @@ static int cxgb_up(struct adapter *adapter) } t1_interrupts_clear(adapter); - - if ((err = request_irq(adapter->pdev->irq, &t1_interrupt, SA_SHIRQ, - adapter->name, adapter))) + if ((err = request_irq(adapter->pdev->irq, + t1_select_intr_handler(adapter), SA_SHIRQ, + adapter->name, adapter))) { goto out_err; - + } t1_sge_start(adapter->sge); t1_interrupts_enable(adapter); - - err = 0; out_err: return err; } @@ -339,47 +345,80 @@ static void set_msglevel(struct net_device *dev, u32 val) } static char stats_strings[][ETH_GSTRING_LEN] = { - "TxOctetsOK", - "TxOctetsBad", - "TxUnicastFramesOK", - "TxMulticastFramesOK", - "TxBroadcastFramesOK", - "TxPauseFrames", - "TxFramesWithDeferredXmissions", - "TxLateCollisions", - "TxTotalCollisions", - "TxFramesAbortedDueToXSCollisions", - "TxUnderrun", - "TxLengthErrors", - "TxInternalMACXmitError", - "TxFramesWithExcessiveDeferral", - "TxFCSErrors", - - "RxOctetsOK", - "RxOctetsBad", - "RxUnicastFramesOK", - "RxMulticastFramesOK", - "RxBroadcastFramesOK", - "RxPauseFrames", - "RxFCSErrors", - "RxAlignErrors", - "RxSymbolErrors", - "RxDataErrors", - "RxSequenceErrors", - "RxRuntErrors", - "RxJabberErrors", - "RxInternalMACRcvError", - "RxInRangeLengthErrors", - "RxOutOfRangeLengthField", - "RxFrameTooLongErrors" + "TxOctetsOK", + "TxOctetsBad", + "TxUnicastFramesOK", + "TxMulticastFramesOK", + "TxBroadcastFramesOK", + "TxPauseFrames", + "TxFramesWithDeferredXmissions", + "TxLateCollisions", + "TxTotalCollisions", + "TxFramesAbortedDueToXSCollisions", + "TxUnderrun", + "TxLengthErrors", + "TxInternalMACXmitError", + "TxFramesWithExcessiveDeferral", + "TxFCSErrors", + + "RxOctetsOK", + "RxOctetsBad", + "RxUnicastFramesOK", + "RxMulticastFramesOK", + "RxBroadcastFramesOK", + "RxPauseFrames", + "RxFCSErrors", + "RxAlignErrors", + "RxSymbolErrors", + "RxDataErrors", + "RxSequenceErrors", + "RxRuntErrors", + "RxJabberErrors", + "RxInternalMACRcvError", + "RxInRangeLengthErrors", + "RxOutOfRangeLengthField", + "RxFrameTooLongErrors", + + "TSO", + "VLANextractions", + "VLANinsertions", + "RxCsumGood", + "TxCsumOffload", + "RxDrops" + + "respQ_empty", + "respQ_overflow", + "freelistQ_empty", + "pkt_too_big", + "pkt_mismatch", + "cmdQ_full0", + "cmdQ_full1", + "tx_ipfrags", + "tx_reg_pkts", + "tx_lso_pkts", + "tx_do_cksum", + + "espi_DIP2ParityErr", + "espi_DIP4Err", + "espi_RxDrops", + "espi_TxDrops", + "espi_RxOvfl", + "espi_ParityErr" }; + +#define T2_REGMAP_SIZE (3 * 1024) + +static int get_regs_len(struct net_device *dev) +{ + return T2_REGMAP_SIZE; +} static void get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) { struct adapter *adapter = dev->priv; - strcpy(info->driver, driver_name); - strcpy(info->version, driver_version); + strcpy(info->driver, DRV_NAME); + strcpy(info->version, DRV_VERSION); strcpy(info->fw_version, "N/A"); strcpy(info->bus_info, pci_name(adapter->pdev)); } @@ -401,42 +440,88 @@ static void get_stats(struct net_device *dev, struct ethtool_stats *stats, struct adapter *adapter = dev->priv; struct cmac *mac = adapter->port[dev->if_port].mac; const struct cmac_statistics *s; + const struct sge_port_stats *ss; + const struct sge_intr_counts *t; s = mac->ops->statistics_update(mac, MAC_STATS_UPDATE_FULL); + ss = t1_sge_get_port_stats(adapter->sge, dev->if_port); + t = t1_sge_get_intr_counts(adapter->sge); + + *data++ = s->TxOctetsOK; + *data++ = s->TxOctetsBad; + *data++ = s->TxUnicastFramesOK; + *data++ = s->TxMulticastFramesOK; + *data++ = s->TxBroadcastFramesOK; + *data++ = s->TxPauseFrames; + *data++ = s->TxFramesWithDeferredXmissions; + *data++ = s->TxLateCollisions; + *data++ = s->TxTotalCollisions; + *data++ = s->TxFramesAbortedDueToXSCollisions; + *data++ = s->TxUnderrun; + *data++ = s->TxLengthErrors; + *data++ = s->TxInternalMACXmitError; + *data++ = s->TxFramesWithExcessiveDeferral; + *data++ = s->TxFCSErrors; + + *data++ = s->RxOctetsOK; + *data++ = s->RxOctetsBad; + *data++ = s->RxUnicastFramesOK; + *data++ = s->RxMulticastFramesOK; + *data++ = s->RxBroadcastFramesOK; + *data++ = s->RxPauseFrames; + *data++ = s->RxFCSErrors; + *data++ = s->RxAlignErrors; + *data++ = s->RxSymbolErrors; + *data++ = s->RxDataErrors; + *data++ = s->RxSequenceErrors; + *data++ = s->RxRuntErrors; + *data++ = s->RxJabberErrors; + *data++ = s->RxInternalMACRcvError; + *data++ = s->RxInRangeLengthErrors; + *data++ = s->RxOutOfRangeLengthField; + *data++ = s->RxFrameTooLongErrors; + + *data++ = ss->tso; + *data++ = ss->vlan_xtract; + *data++ = ss->vlan_insert; + *data++ = ss->rx_cso_good; + *data++ = ss->tx_cso; + *data++ = ss->rx_drops; + + *data++ = (u64)t->respQ_empty; + *data++ = (u64)t->respQ_overflow; + *data++ = (u64)t->freelistQ_empty; + *data++ = (u64)t->pkt_too_big; + *data++ = (u64)t->pkt_mismatch; + *data++ = (u64)t->cmdQ_full[0]; + *data++ = (u64)t->cmdQ_full[1]; + *data++ = (u64)t->tx_ipfrags; + *data++ = (u64)t->tx_reg_pkts; + *data++ = (u64)t->tx_lso_pkts; + *data++ = (u64)t->tx_do_cksum; +} + +static inline void reg_block_dump(struct adapter *ap, void *buf, + unsigned int start, unsigned int end) +{ + u32 *p = buf + start; + + for ( ; start <= end; start += sizeof(u32)) + *p++ = readl(ap->regs + start); +} - *data++ = s->TxOctetsOK; - *data++ = s->TxOctetsBad; - *data++ = s->TxUnicastFramesOK; - *data++ = s->TxMulticastFramesOK; - *data++ = s->TxBroadcastFramesOK; - *data++ = s->TxPauseFrames; - *data++ = s->TxFramesWithDeferredXmissions; - *data++ = s->TxLateCollisions; - *data++ = s->TxTotalCollisions; - *data++ = s->TxFramesAbortedDueToXSCollisions; - *data++ = s->TxUnderrun; - *data++ = s->TxLengthErrors; - *data++ = s->TxInternalMACXmitError; - *data++ = s->TxFramesWithExcessiveDeferral; - *data++ = s->TxFCSErrors; - - *data++ = s->RxOctetsOK; - *data++ = s->RxOctetsBad; - *data++ = s->RxUnicastFramesOK; - *data++ = s->RxMulticastFramesOK; - *data++ = s->RxBroadcastFramesOK; - *data++ = s->RxPauseFrames; - *data++ = s->RxFCSErrors; - *data++ = s->RxAlignErrors; - *data++ = s->RxSymbolErrors; - *data++ = s->RxDataErrors; - *data++ = s->RxSequenceErrors; - *data++ = s->RxRuntErrors; - *data++ = s->RxJabberErrors; - *data++ = s->RxInternalMACRcvError; - *data++ = s->RxInRangeLengthErrors; - *data++ = s->RxOutOfRangeLengthField; - *data++ = s->RxFrameTooLongErrors; +static void get_regs(struct net_device *dev, struct ethtool_regs *regs, + void *buf) +{ + struct adapter *ap = dev->priv; + + /* + * Version scheme: bits 0..9: chip version, bits 10..15: chip revision + */ + regs->version = 2; + + memset(buf, 0, T2_REGMAP_SIZE); + reg_block_dump(ap, buf, 0, A_SG_RESPACCUTIMER); } static int get_settings(struct net_device *dev, struct ethtool_cmd *cmd) @@ -455,12 +540,12 @@ static int get_settings(struct net_device *dev, struct ethtool_cmd *cmd) cmd->duplex = -1; } - cmd->port = (cmd->supported & SUPPORTED_TP) ? PORT_TP : PORT_FIBRE; - cmd->phy_address = p->phy->addr; - cmd->transceiver = XCVR_EXTERNAL; - cmd->autoneg = p->link_config.autoneg; - cmd->maxtxpkt = 0; - cmd->maxrxpkt = 0; + cmd->port = (cmd->supported & SUPPORTED_TP) ? PORT_TP : PORT_FIBRE; + cmd->phy_address = p->phy->addr; + cmd->transceiver = XCVR_EXTERNAL; + cmd->autoneg = p->link_config.autoneg; + cmd->maxtxpkt = 0; + cmd->maxrxpkt = 0; return 0; } @@ -506,7 +591,7 @@ static int set_settings(struct net_device *dev, struct ethtool_cmd *cmd) struct link_config *lc = &p->link_config; if (!(lc->supported & SUPPORTED_Autoneg)) - return -EOPNOTSUPP; /* can't change speed/duplex */ + return -EOPNOTSUPP; /* can't change speed/duplex */ if (cmd->autoneg == AUTONEG_DISABLE) { int cap = speed_duplex_to_caps(cmd->speed, cmd->duplex); @@ -631,7 +716,7 @@ static int set_sge_param(struct net_device *dev, struct ethtool_ringparam *e) return -EINVAL; if (adapter->flags & FULL_INIT_DONE) - return -EBUSY; + return -EBUSY; adapter->params.sge.freelQ_size[!jumbo_fl] = e->rx_pending; adapter->params.sge.freelQ_size[jumbo_fl] = e->rx_jumbo_pending; @@ -645,22 +730,20 @@ static int set_coalesce(struct net_device *dev, struct ethtool_coalesce *c) { struct adapter *adapter = dev->priv; - unsigned int sge_coalesce_usecs = 0; + /* + * If RX coalescing is requested we use NAPI, otherwise interrupts. + * This choice can be made only when all ports and the TOE are off. + */ + if (adapter->open_device_map == 0) + adapter->params.sge.polling = c->use_adaptive_rx_coalesce; - sge_coalesce_usecs = adapter->params.sge.last_rx_coalesce_raw; - sge_coalesce_usecs /= board_info(adapter)->clock_core / 1000000; - if ( (adapter->params.sge.coalesce_enable && !c->use_adaptive_rx_coalesce) && - (c->rx_coalesce_usecs == sge_coalesce_usecs) ) { - adapter->params.sge.rx_coalesce_usecs = - adapter->params.sge.default_rx_coalesce_usecs; + if (adapter->params.sge.polling) { + adapter->params.sge.rx_coalesce_usecs = 0; } else { adapter->params.sge.rx_coalesce_usecs = c->rx_coalesce_usecs; } - - adapter->params.sge.last_rx_coalesce_raw = adapter->params.sge.rx_coalesce_usecs; - adapter->params.sge.last_rx_coalesce_raw *= (board_info(adapter)->clock_core / 1000000); + adapter->params.sge.coalesce_enable = c->use_adaptive_rx_coalesce; adapter->params.sge.sample_interval_usecs = c->rate_sample_interval; - adapter->params.sge.coalesce_enable = c->use_adaptive_rx_coalesce; t1_sge_set_coalesce_params(adapter->sge, &adapter->params.sge); return 0; } @@ -669,12 +752,7 @@ static int get_coalesce(struct net_device *dev, struct ethtool_coalesce *c) { struct adapter *adapter = dev->priv; - if (adapter->params.sge.coalesce_enable) { /* Adaptive algorithm on */ - c->rx_coalesce_usecs = adapter->params.sge.last_rx_coalesce_raw; - c->rx_coalesce_usecs /= board_info(adapter)->clock_core / 1000000; - } else { - c->rx_coalesce_usecs = adapter->params.sge.rx_coalesce_usecs; - } + c->rx_coalesce_usecs = adapter->params.sge.rx_coalesce_usecs; c->rate_sample_interval = adapter->params.sge.sample_interval_usecs; c->use_adaptive_rx_coalesce = adapter->params.sge.coalesce_enable; return 0; @@ -682,9 +760,7 @@ static int get_coalesce(struct net_device *dev, struct ethtool_coalesce *c) static int get_eeprom_len(struct net_device *dev) { - struct adapter *adapter = dev->priv; - - return t1_is_asic(adapter) ? EEPROM_SIZE : 0; + return EEPROM_SIZE; } #define EEPROM_MAGIC(ap) \ @@ -728,118 +804,55 @@ static struct ethtool_ops t1_ethtool_ops = { .get_strings = get_strings, .get_stats_count = get_stats_count, .get_ethtool_stats = get_stats, + .get_regs_len = get_regs_len, + .get_regs = get_regs, .get_tso = ethtool_op_get_tso, .set_tso = set_tso, }; -static int ethtool_ioctl(struct net_device *dev, void *useraddr) +static void cxgb_proc_cleanup(struct adapter *adapter, + struct proc_dir_entry *dir) { - u32 cmd; - struct adapter *adapter = dev->priv; - - if (copy_from_user(&cmd, useraddr, sizeof(cmd))) - return -EFAULT; - - switch (cmd) { - case ETHTOOL_SETREG: { - struct ethtool_reg edata; - - if (!capable(CAP_NET_ADMIN)) - return -EPERM; - if (copy_from_user(&edata, useraddr, sizeof(edata))) - return -EFAULT; - if ((edata.addr & 3) != 0 || edata.addr >= adapter->mmio_len) - return -EINVAL; - if (edata.addr == A_ESPI_MISC_CONTROL) - t1_espi_set_misc_ctrl(adapter, edata.val); - else { - if (edata.addr == 0x950) - t1_sge_set_ptimeout(adapter, edata.val); - else - writel(edata.val, adapter->regs + edata.addr); - } - break; - } - case ETHTOOL_GETREG: { - struct ethtool_reg edata; - - if (copy_from_user(&edata, useraddr, sizeof(edata))) - return -EFAULT; - if ((edata.addr & 3) != 0 || edata.addr >= adapter->mmio_len) - return -EINVAL; - if (edata.addr >= 0x900 && edata.addr <= 0x93c) - edata.val = t1_espi_get_mon(adapter, edata.addr, 1); - else { - if (edata.addr == 0x950) - edata.val = t1_sge_get_ptimeout(adapter); - else - edata.val = readl(adapter->regs + edata.addr); - } - if (copy_to_user(useraddr, &edata, sizeof(edata))) - return -EFAULT; - break; - } - case ETHTOOL_SETTPI: { - struct ethtool_reg edata; - - if (!capable(CAP_NET_ADMIN)) - return -EPERM; - if (copy_from_user(&edata, useraddr, sizeof(edata))) - return -EFAULT; - if ((edata.addr & 3) != 0) - return -EINVAL; - t1_tpi_write(adapter, edata.addr, edata.val); - break; - } - case ETHTOOL_GETTPI: { - struct ethtool_reg edata; - - if (copy_from_user(&edata, useraddr, sizeof(edata))) - return -EFAULT; - if ((edata.addr & 3) != 0) - return -EINVAL; - t1_tpi_read(adapter, edata.addr, &edata.val); - if (copy_to_user(useraddr, &edata, sizeof(edata))) - return -EFAULT; - break; - } - default: - return -EOPNOTSUPP; - } - return 0; + const char *name; + name = adapter->name; + remove_proc_entry(name, dir); } +//#define chtoe_setup_toedev(adapter) NULL +#define update_mtu_tab(adapter) +#define write_smt_entry(adapter, idx) static int t1_ioctl(struct net_device *dev, struct ifreq *req, int cmd) { - struct adapter *adapter = dev->priv; - struct mii_ioctl_data *data = (struct mii_ioctl_data *)&req->ifr_data; + struct adapter *adapter = dev->priv; + struct mii_ioctl_data *data = (struct mii_ioctl_data *)&req->ifr_data; switch (cmd) { - case SIOCGMIIPHY: - data->phy_id = adapter->port[dev->if_port].phy->addr; - /* FALLTHRU */ - case SIOCGMIIREG: { + case SIOCGMIIPHY: + data->phy_id = adapter->port[dev->if_port].phy->addr; + /* FALLTHRU */ + case SIOCGMIIREG: { struct cphy *phy = adapter->port[dev->if_port].phy; u32 val; - if (!phy->mdio_read) return -EOPNOTSUPP; + if (!phy->mdio_read) + return -EOPNOTSUPP; phy->mdio_read(adapter, data->phy_id, 0, data->reg_num & 0x1f, &val); - data->val_out = val; - break; + data->val_out = val; + break; } - case SIOCSMIIREG: { + case SIOCSMIIREG: { struct cphy *phy = adapter->port[dev->if_port].phy; - if (!capable(CAP_NET_ADMIN)) return -EPERM; - if (!phy->mdio_write) return -EOPNOTSUPP; + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + if (!phy->mdio_write) + return -EOPNOTSUPP; phy->mdio_write(adapter, data->phy_id, 0, data->reg_num & 0x1f, - data->val_in); - break; + data->val_in); + break; } - case SIOCCHETHTOOL: - return ethtool_ioctl(dev, (void *)req->ifr_data); default: return -EOPNOTSUPP; } @@ -853,9 +866,9 @@ static int t1_change_mtu(struct net_device *dev, int new_mtu) struct cmac *mac = adapter->port[dev->if_port].mac; if (!mac->ops->set_mtu) - return -EOPNOTSUPP; + return -EOPNOTSUPP; if (new_mtu < 68) - return -EINVAL; + return -EINVAL; if ((ret = mac->ops->set_mtu(mac, new_mtu))) return ret; dev->mtu = new_mtu; @@ -902,9 +915,12 @@ static void vlan_rx_kill_vid(struct net_device *dev, unsigned short vid) #ifdef CONFIG_NET_POLL_CONTROLLER static void t1_netpoll(struct net_device *dev) { + unsigned long flags; struct adapter *adapter = dev->priv; - t1_interrupt(adapter->pdev->irq, adapter, NULL); + local_irq_save(flags); + t1_select_intr_handler(adapter)(adapter->pdev->irq, adapter, NULL); + local_irq_restore(flags); } #endif @@ -938,16 +954,17 @@ static void mac_stats_task(void *data) */ static void ext_intr_task(void *data) { - u32 enable; struct adapter *adapter = data; elmer0_ext_intr_handler(adapter); /* Now reenable external interrupts */ - t1_write_reg_4(adapter, A_PL_CAUSE, F_PL_INTR_EXT); - enable = t1_read_reg_4(adapter, A_PL_ENABLE); - t1_write_reg_4(adapter, A_PL_ENABLE, enable | F_PL_INTR_EXT); + spin_lock_irq(&adapter->async_lock); adapter->slow_intr_mask |= F_PL_INTR_EXT; + writel(F_PL_INTR_EXT, adapter->regs + A_PL_CAUSE); + writel(adapter->slow_intr_mask | F_PL_INTR_SGE_DATA, + adapter->regs + A_PL_ENABLE); + spin_unlock_irq(&adapter->async_lock); } /* @@ -955,15 +972,14 @@ static void ext_intr_task(void *data) */ void t1_elmer0_ext_intr(struct adapter *adapter) { - u32 enable = t1_read_reg_4(adapter, A_PL_ENABLE); - /* * Schedule a task to handle external interrupts as we require * a process context. We disable EXT interrupts in the interim * and let the task reenable them when it's done. */ adapter->slow_intr_mask &= ~F_PL_INTR_EXT; - t1_write_reg_4(adapter, A_PL_ENABLE, enable & ~F_PL_INTR_EXT); + writel(adapter->slow_intr_mask | F_PL_INTR_SGE_DATA, + adapter->regs + A_PL_ENABLE); schedule_work(&adapter->ext_intr_handler_task); } @@ -977,7 +993,6 @@ void t1_fatal_err(struct adapter *adapter) adapter->name); } - static int __devinit init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { @@ -990,14 +1005,14 @@ static int __devinit init_one(struct pci_dev *pdev, struct port_info *pi; if (!version_printed) { - printk(KERN_INFO "%s - version %s\n", driver_string, - driver_version); + printk(KERN_INFO "%s - version %s\n", DRV_DESCRIPTION, + DRV_VERSION); ++version_printed; } err = pci_enable_device(pdev); if (err) - return err; + return err; if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) { CH_ERR("%s: cannot find PCI device memory base address\n", @@ -1006,20 +1021,22 @@ static int __devinit init_one(struct pci_dev *pdev, goto out_disable_pdev; } - if (!pci_set_dma_mask(pdev, PCI_DMA_64BIT)) { + if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) { pci_using_dac = 1; - if (pci_set_consistent_dma_mask(pdev, PCI_DMA_64BIT)) { + + if (pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK)) { CH_ERR("%s: unable to obtain 64-bit DMA for" "consistent allocations\n", pci_name(pdev)); err = -ENODEV; goto out_disable_pdev; } - } else if ((err = pci_set_dma_mask(pdev, PCI_DMA_32BIT)) != 0) { + + } else if ((err = pci_set_dma_mask(pdev, DMA_32BIT_MASK)) != 0) { CH_ERR("%s: no usable DMA configuration\n", pci_name(pdev)); goto out_disable_pdev; } - err = pci_request_regions(pdev, driver_name); + err = pci_request_regions(pdev, DRV_NAME); if (err) { CH_ERR("%s: cannot obtain PCI resources\n", pci_name(pdev)); goto out_disable_pdev; @@ -1027,7 +1044,7 @@ static int __devinit init_one(struct pci_dev *pdev, pci_set_master(pdev); - mmio_start = pci_resource_start(pdev, 0); + mmio_start = pci_resource_start(pdev, 0); mmio_len = pci_resource_len(pdev, 0); bi = t1_get_board_info(ent->driver_data); @@ -1074,9 +1091,14 @@ static int __devinit init_one(struct pci_dev *pdev, ext_intr_task, adapter); INIT_WORK(&adapter->stats_update_task, mac_stats_task, adapter); +#ifdef work_struct + init_timer(&adapter->stats_update_timer); + adapter->stats_update_timer.function = mac_stats_timer; + adapter->stats_update_timer.data = + (unsigned long)adapter; +#endif pci_set_drvdata(pdev, netdev); - } pi = &adapter->port[i]; @@ -1088,11 +1110,12 @@ static int __devinit init_one(struct pci_dev *pdev, netdev->mem_end = mmio_start + mmio_len - 1; netdev->priv = adapter; netdev->features |= NETIF_F_SG | NETIF_F_IP_CSUM; + netdev->features |= NETIF_F_LLTX; + adapter->flags |= RX_CSUM_ENABLED | TCP_CSUM_CAPABLE; if (pci_using_dac) netdev->features |= NETIF_F_HIGHDMA; if (vlan_tso_capable(adapter)) { - adapter->flags |= UDP_CSUM_CAPABLE; #if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE) adapter->flags |= VLAN_ACCEL_CAPABLE; netdev->features |= @@ -1120,7 +1143,7 @@ static int __devinit init_one(struct pci_dev *pdev, #endif netdev->weight = 64; - SET_ETHTOOL_OPS(netdev, &t1_ethtool_ops); + SET_ETHTOOL_OPS(netdev, &t1_ethtool_ops); } if (t1_init_sw_modules(adapter, bi) < 0) { @@ -1147,7 +1170,7 @@ static int __devinit init_one(struct pci_dev *pdev, if (!adapter->registered_device_map) adapter->name = adapter->port[i].dev->name; - __set_bit(i, &adapter->registered_device_map); + __set_bit(i, &adapter->registered_device_map); } } if (!adapter->registered_device_map) { @@ -1166,11 +1189,12 @@ static int __devinit init_one(struct pci_dev *pdev, t1_free_sw_modules(adapter); out_free_dev: if (adapter) { - if (adapter->regs) - iounmap(adapter->regs); + if (adapter->regs) iounmap(adapter->regs); for (i = bi->port_number - 1; i >= 0; --i) - if (adapter->port[i].dev) - free_netdev(adapter->port[i].dev); + if (adapter->port[i].dev) { + cxgb_proc_cleanup(adapter, proc_root_driver); + kfree(adapter->port[i].dev); + } } pci_release_regions(pdev); out_disable_pdev: @@ -1200,8 +1224,10 @@ static void __devexit remove_one(struct pci_dev *pdev) t1_free_sw_modules(adapter); iounmap(adapter->regs); while (--i >= 0) - if (adapter->port[i].dev) - free_netdev(adapter->port[i].dev); + if (adapter->port[i].dev) { + cxgb_proc_cleanup(adapter, proc_root_driver); + kfree(adapter->port[i].dev); + } pci_release_regions(pdev); pci_disable_device(pdev); pci_set_drvdata(pdev, NULL); @@ -1210,7 +1236,7 @@ static void __devexit remove_one(struct pci_dev *pdev) } static struct pci_driver driver = { - .name = driver_name, + .name = DRV_NAME, .id_table = t1_pci_tbl, .probe = init_one, .remove = __devexit_p(remove_one), @@ -1228,4 +1254,3 @@ static void __exit t1_cleanup_module(void) module_init(t1_init_module); module_exit(t1_cleanup_module); - diff --git a/drivers/net/chelsio/cxgb2.h b/drivers/net/chelsio/cxgb2.h deleted file mode 100644 index 6ac326afcf0..00000000000 --- a/drivers/net/chelsio/cxgb2.h +++ /dev/null @@ -1,122 +0,0 @@ -/***************************************************************************** - * * - * File: cxgb2.h * - * $Revision: 1.8 $ * - * $Date: 2005/03/23 07:41:27 $ * - * Description: * - * part of the Chelsio 10Gb Ethernet Driver. * - * * - * This program is free software; you can redistribute it and/or modify * - * it under the terms of the GNU General Public License, version 2, as * - * published by the Free Software Foundation. * - * * - * You should have received a copy of the GNU General Public License along * - * with this program; if not, write to the Free Software Foundation, Inc., * - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * - * * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * - * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * - * * - * http://www.chelsio.com * - * * - * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * - * All rights reserved. * - * * - * Maintainers: maintainers@chelsio.com * - * * - * Authors: Dimitrios Michailidis * - * Tina Yang * - * Felix Marti * - * Scott Bardone * - * Kurt Ottaway * - * Frank DiMambro * - * * - * History: * - * * - ****************************************************************************/ - -#ifndef __CXGB_LINUX_H__ -#define __CXGB_LINUX_H__ - -#include -#include -#include -#include -#include - -/* This belongs in if_ether.h */ -#define ETH_P_CPL5 0xf - -struct cmac; -struct cphy; - -struct port_info { - struct net_device *dev; - struct cmac *mac; - struct cphy *phy; - struct link_config link_config; - struct net_device_stats netstats; -}; - -struct cxgbdev; -struct t1_sge; -struct pemc3; -struct pemc4; -struct pemc5; -struct peulp; -struct petp; -struct pecspi; -struct peespi; -struct work_struct; -struct vlan_group; - -enum { /* adapter flags */ - FULL_INIT_DONE = 0x1, - USING_MSI = 0x2, - TSO_CAPABLE = 0x4, - TCP_CSUM_CAPABLE = 0x8, - UDP_CSUM_CAPABLE = 0x10, - VLAN_ACCEL_CAPABLE = 0x20, - RX_CSUM_ENABLED = 0x40, -}; - -struct adapter { - u8 *regs; - struct pci_dev *pdev; - unsigned long registered_device_map; - unsigned long open_device_map; - unsigned int flags; - - const char *name; - int msg_enable; - u32 mmio_len; - - struct work_struct ext_intr_handler_task; - struct adapter_params params; - - struct vlan_group *vlan_grp; - - /* Terminator modules. */ - struct sge *sge; - struct pemc3 *mc3; - struct pemc4 *mc4; - struct pemc5 *mc5; - struct petp *tp; - struct pecspi *cspi; - struct peespi *espi; - struct peulp *ulp; - - struct port_info port[MAX_NPORTS]; - struct work_struct stats_update_task; - struct timer_list stats_update_timer; - - struct semaphore mib_mutex; - spinlock_t tpi_lock; - spinlock_t work_lock; - - spinlock_t async_lock ____cacheline_aligned; /* guards async operations */ - u32 slow_intr_mask; -}; - -#endif diff --git a/drivers/net/chelsio/elmer0.h b/drivers/net/chelsio/elmer0.h index 08f148643e7..5590cb2dac1 100644 --- a/drivers/net/chelsio/elmer0.h +++ b/drivers/net/chelsio/elmer0.h @@ -1,8 +1,8 @@ /***************************************************************************** * * * File: elmer0.h * - * $Revision: 1.3 $ * - * $Date: 2005/03/23 07:15:58 $ * + * $Revision: 1.6 $ * + * $Date: 2005/06/21 22:49:43 $ * * Description: * * part of the Chelsio 10Gb Ethernet Driver. * * * @@ -36,14 +36,8 @@ * * ****************************************************************************/ -#ifndef CHELSIO_ELMER0_H -#define CHELSIO_ELMER0_H - -/* ELMER0 flavors */ -enum { - ELMER0_XC2S300E_6FT256_C, - ELMER0_XC2S100E_6TQ144_C -}; +#ifndef _CXGB_ELMER0_H_ +#define _CXGB_ELMER0_H_ /* ELMER0 registers */ #define A_ELMER0_VERSION 0x100000 @@ -154,4 +148,4 @@ enum { #define MI1_OP_INDIRECT_READ_INC 2 #define MI1_OP_INDIRECT_READ 3 -#endif +#endif /* _CXGB_ELMER0_H_ */ diff --git a/drivers/net/chelsio/espi.c b/drivers/net/chelsio/espi.c index 7ec2dc7bafa..230642571c9 100644 --- a/drivers/net/chelsio/espi.c +++ b/drivers/net/chelsio/espi.c @@ -1,8 +1,8 @@ /***************************************************************************** * * * File: espi.c * - * $Revision: 1.9 $ * - * $Date: 2005/03/23 07:41:27 $ * + * $Revision: 1.14 $ * + * $Date: 2005/05/14 00:59:32 $ * * Description: * * Ethernet SPI functionality. * * part of the Chelsio 10Gb Ethernet Driver. * @@ -63,15 +63,16 @@ static int tricn_write(adapter_t *adapter, int bundle_addr, int module_addr, { int busy, attempts = TRICN_CMD_ATTEMPTS; - t1_write_reg_4(adapter, A_ESPI_CMD_ADDR, V_WRITE_DATA(wr_data) | - V_REGISTER_OFFSET(reg_offset) | - V_CHANNEL_ADDR(ch_addr) | V_MODULE_ADDR(module_addr) | - V_BUNDLE_ADDR(bundle_addr) | - V_SPI4_COMMAND(TRICN_CMD_WRITE)); - t1_write_reg_4(adapter, A_ESPI_GOSTAT, 0); + writel(V_WRITE_DATA(wr_data) | + V_REGISTER_OFFSET(reg_offset) | + V_CHANNEL_ADDR(ch_addr) | V_MODULE_ADDR(module_addr) | + V_BUNDLE_ADDR(bundle_addr) | + V_SPI4_COMMAND(TRICN_CMD_WRITE), + adapter->regs + A_ESPI_CMD_ADDR); + writel(0, adapter->regs + A_ESPI_GOSTAT); do { - busy = t1_read_reg_4(adapter, A_ESPI_GOSTAT) & F_ESPI_CMD_BUSY; + busy = readl(adapter->regs + A_ESPI_GOSTAT) & F_ESPI_CMD_BUSY; } while (busy && --attempts); if (busy) @@ -99,12 +100,12 @@ static int tricn_init(adapter_t *adapter) /* 1 */ timeout=1000; do { - stat = t1_read_reg_4(adapter, A_ESPI_RX_RESET); + stat = readl(adapter->regs + A_ESPI_RX_RESET); is_ready = (stat & 0x4); timeout--; udelay(5); } while (!is_ready || (timeout==0)); - t1_write_reg_4(adapter, A_ESPI_RX_RESET, 0x2); + writel(0x2, adapter->regs + A_ESPI_RX_RESET); if (timeout==0) { CH_ERR("ESPI : ERROR : Timeout tricn_init() \n"); @@ -127,14 +128,14 @@ static int tricn_init(adapter_t *adapter) for (i=8; i<= 8; i++) tricn_write(adapter, 0, 2, i, TRICN_CNFG, 0xf1); /* 3 */ - t1_write_reg_4(adapter, A_ESPI_RX_RESET, 0x3); + writel(0x3, adapter->regs + A_ESPI_RX_RESET); return 0; } void t1_espi_intr_enable(struct peespi *espi) { - u32 enable, pl_intr = t1_read_reg_4(espi->adapter, A_PL_ENABLE); + u32 enable, pl_intr = readl(espi->adapter->regs + A_PL_ENABLE); /* * Cannot enable ESPI interrupts on T1B because HW asserts the @@ -144,28 +145,28 @@ void t1_espi_intr_enable(struct peespi *espi) * cannot be cleared (HW bug). */ enable = t1_is_T1B(espi->adapter) ? 0 : ESPI_INTR_MASK; - t1_write_reg_4(espi->adapter, A_ESPI_INTR_ENABLE, enable); - t1_write_reg_4(espi->adapter, A_PL_ENABLE, pl_intr | F_PL_INTR_ESPI); + writel(enable, espi->adapter->regs + A_ESPI_INTR_ENABLE); + writel(pl_intr | F_PL_INTR_ESPI, espi->adapter->regs + A_PL_ENABLE); } void t1_espi_intr_clear(struct peespi *espi) { - t1_write_reg_4(espi->adapter, A_ESPI_INTR_STATUS, 0xffffffff); - t1_write_reg_4(espi->adapter, A_PL_CAUSE, F_PL_INTR_ESPI); + writel(0xffffffff, espi->adapter->regs + A_ESPI_INTR_STATUS); + writel(F_PL_INTR_ESPI, espi->adapter->regs + A_PL_CAUSE); } void t1_espi_intr_disable(struct peespi *espi) { - u32 pl_intr = t1_read_reg_4(espi->adapter, A_PL_ENABLE); + u32 pl_intr = readl(espi->adapter->regs + A_PL_ENABLE); - t1_write_reg_4(espi->adapter, A_ESPI_INTR_ENABLE, 0); - t1_write_reg_4(espi->adapter, A_PL_ENABLE, pl_intr & ~F_PL_INTR_ESPI); + writel(0, espi->adapter->regs + A_ESPI_INTR_ENABLE); + writel(pl_intr & ~F_PL_INTR_ESPI, espi->adapter->regs + A_PL_ENABLE); } int t1_espi_intr_handler(struct peespi *espi) { u32 cnt; - u32 status = t1_read_reg_4(espi->adapter, A_ESPI_INTR_STATUS); + u32 status = readl(espi->adapter->regs + A_ESPI_INTR_STATUS); if (status & F_DIP4ERR) espi->intr_cnt.DIP4_err++; @@ -184,7 +185,7 @@ int t1_espi_intr_handler(struct peespi *espi) * Must read the error count to clear the interrupt * that it causes. */ - cnt = t1_read_reg_4(espi->adapter, A_ESPI_DIP2_ERR_COUNT); + cnt = readl(espi->adapter->regs + A_ESPI_DIP2_ERR_COUNT); } /* @@ -193,68 +194,28 @@ int t1_espi_intr_handler(struct peespi *espi) */ if (status && t1_is_T1B(espi->adapter)) status = 1; - t1_write_reg_4(espi->adapter, A_ESPI_INTR_STATUS, status); + writel(status, espi->adapter->regs + A_ESPI_INTR_STATUS); return 0; } -static void espi_setup_for_pm3393(adapter_t *adapter) +const struct espi_intr_counts *t1_espi_get_intr_counts(struct peespi *espi) { - u32 wmark = t1_is_T1B(adapter) ? 0x4000 : 0x3200; - - t1_write_reg_4(adapter, A_ESPI_SCH_TOKEN0, 0x1f4); - t1_write_reg_4(adapter, A_ESPI_SCH_TOKEN1, 0x1f4); - t1_write_reg_4(adapter, A_ESPI_SCH_TOKEN2, 0x1f4); - t1_write_reg_4(adapter, A_ESPI_SCH_TOKEN3, 0x1f4); - t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK, 0x100); - t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK, wmark); - t1_write_reg_4(adapter, A_ESPI_CALENDAR_LENGTH, 3); - t1_write_reg_4(adapter, A_ESPI_TRAIN, 0x08000008); - t1_write_reg_4(adapter, A_PORT_CONFIG, - V_RX_NPORTS(1) | V_TX_NPORTS(1)); + return &espi->intr_cnt; } -static void espi_setup_for_vsc7321(adapter_t *adapter) +static void espi_setup_for_pm3393(adapter_t *adapter) { u32 wmark = t1_is_T1B(adapter) ? 0x4000 : 0x3200; - t1_write_reg_4(adapter, A_ESPI_SCH_TOKEN0, 0x1f4); - t1_write_reg_4(adapter, A_ESPI_SCH_TOKEN1, 0x1f4); - t1_write_reg_4(adapter, A_ESPI_SCH_TOKEN2, 0x1f4); - t1_write_reg_4(adapter, A_ESPI_SCH_TOKEN3, 0x1f4); - t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK, 0x100); - t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK, wmark); - t1_write_reg_4(adapter, A_ESPI_CALENDAR_LENGTH, 3); - t1_write_reg_4(adapter, A_ESPI_TRAIN, 0x08000008); - t1_write_reg_4(adapter, A_PORT_CONFIG, - V_RX_NPORTS(1) | V_TX_NPORTS(1)); -} - -/* - * Note that T1B requires at least 2 ports for IXF1010 due to a HW bug. - */ -static void espi_setup_for_ixf1010(adapter_t *adapter, int nports) -{ - t1_write_reg_4(adapter, A_ESPI_CALENDAR_LENGTH, 1); - if (nports == 4) { - if (is_T2(adapter)) { - t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK, - 0xf00); - t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK, - 0x3c0); - } else { - t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK, - 0x7ff); - t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK, - 0x1ff); - } - } else { - t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK, - 0x1fff); - t1_write_reg_4(adapter, A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK, - 0x7ff); - } - t1_write_reg_4(adapter, A_PORT_CONFIG, - V_RX_NPORTS(nports) | V_TX_NPORTS(nports)); + writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN0); + writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN1); + writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN2); + writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN3); + writel(0x100, adapter->regs + A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK); + writel(wmark, adapter->regs + A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK); + writel(3, adapter->regs + A_ESPI_CALENDAR_LENGTH); + writel(0x08000008, adapter->regs + A_ESPI_TRAIN); + writel(V_RX_NPORTS(1) | V_TX_NPORTS(1), adapter->regs + A_PORT_CONFIG); } /* T2 Init part -- */ @@ -263,43 +224,42 @@ static void espi_setup_for_ixf1010(adapter_t *adapter, int nports) /* 3. Init TriCN Hard Macro */ int t1_espi_init(struct peespi *espi, int mac_type, int nports) { + u32 cnt; + u32 status_enable_extra = 0; adapter_t *adapter = espi->adapter; - u32 cnt; u32 status, burstval = 0x800100; /* Disable ESPI training. MACs that can handle it enable it below. */ - t1_write_reg_4(adapter, A_ESPI_TRAIN, 0); + writel(0, adapter->regs + A_ESPI_TRAIN); if (is_T2(adapter)) { - t1_write_reg_4(adapter, A_ESPI_MISC_CONTROL, - V_OUT_OF_SYNC_COUNT(4) | - V_DIP2_PARITY_ERR_THRES(3) | V_DIP4_THRES(1)); + writel(V_OUT_OF_SYNC_COUNT(4) | + V_DIP2_PARITY_ERR_THRES(3) | + V_DIP4_THRES(1), adapter->regs + A_ESPI_MISC_CONTROL); if (nports == 4) { /* T204: maxburst1 = 0x40, maxburst2 = 0x20 */ burstval = 0x200040; } } - t1_write_reg_4(adapter, A_ESPI_MAXBURST1_MAXBURST2, burstval); + writel(burstval, adapter->regs + A_ESPI_MAXBURST1_MAXBURST2); - if (mac_type == CHBT_MAC_PM3393) + switch (mac_type) { + case CHBT_MAC_PM3393: espi_setup_for_pm3393(adapter); - else if (mac_type == CHBT_MAC_VSC7321) - espi_setup_for_vsc7321(adapter); - else if (mac_type == CHBT_MAC_IXF1010) { - status_enable_extra = F_INTEL1010MODE; - espi_setup_for_ixf1010(adapter, nports); - } else + break; + default: return -1; + } /* * Make sure any pending interrupts from the SPI are * Cleared before enabling the interrupt. */ - t1_write_reg_4(espi->adapter, A_ESPI_INTR_ENABLE, ESPI_INTR_MASK); - status = t1_read_reg_4(espi->adapter, A_ESPI_INTR_STATUS); + writel(ESPI_INTR_MASK, espi->adapter->regs + A_ESPI_INTR_ENABLE); + status = readl(espi->adapter->regs + A_ESPI_INTR_STATUS); if (status & F_DIP2PARITYERR) { - cnt = t1_read_reg_4(espi->adapter, A_ESPI_DIP2_ERR_COUNT); + cnt = readl(espi->adapter->regs + A_ESPI_DIP2_ERR_COUNT); } /* @@ -308,10 +268,10 @@ int t1_espi_init(struct peespi *espi, int mac_type, int nports) */ if (status && t1_is_T1B(espi->adapter)) status = 1; - t1_write_reg_4(espi->adapter, A_ESPI_INTR_STATUS, status); + writel(status, espi->adapter->regs + A_ESPI_INTR_STATUS); - t1_write_reg_4(adapter, A_ESPI_FIFO_STATUS_ENABLE, - status_enable_extra | F_RXSTATUSENABLE); + writel(status_enable_extra | F_RXSTATUSENABLE, + adapter->regs + A_ESPI_FIFO_STATUS_ENABLE); if (is_T2(adapter)) { tricn_init(adapter); @@ -319,10 +279,10 @@ int t1_espi_init(struct peespi *espi, int mac_type, int nports) * Always position the control at the 1st port egress IN * (sop,eop) counter to reduce PIOs for T/N210 workaround. */ - espi->misc_ctrl = (t1_read_reg_4(adapter, A_ESPI_MISC_CONTROL) + espi->misc_ctrl = (readl(adapter->regs + A_ESPI_MISC_CONTROL) & ~MON_MASK) | (F_MONITORED_DIRECTION | F_MONITORED_INTERFACE); - t1_write_reg_4(adapter, A_ESPI_MISC_CONTROL, espi->misc_ctrl); + writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL); spin_lock_init(&espi->lock); } @@ -354,15 +314,16 @@ void t1_espi_set_misc_ctrl(adapter_t *adapter, u32 val) spin_lock(&espi->lock); espi->misc_ctrl = (val & ~MON_MASK) | (espi->misc_ctrl & MON_MASK); - t1_write_reg_4(adapter, A_ESPI_MISC_CONTROL, espi->misc_ctrl); + writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL); spin_unlock(&espi->lock); } u32 t1_espi_get_mon(adapter_t *adapter, u32 addr, u8 wait) { - struct peespi *espi = adapter->espi; u32 sel; + struct peespi *espi = adapter->espi; + if (!is_T2(adapter)) return 0; sel = V_MONITORED_PORT_NUM((addr & 0x3c) >> 2); @@ -373,14 +334,13 @@ u32 t1_espi_get_mon(adapter_t *adapter, u32 addr, u8 wait) else spin_lock(&espi->lock); if ((sel != (espi->misc_ctrl & MON_MASK))) { - t1_write_reg_4(adapter, A_ESPI_MISC_CONTROL, - ((espi->misc_ctrl & ~MON_MASK) | sel)); - sel = t1_read_reg_4(adapter, A_ESPI_SCH_TOKEN3); - t1_write_reg_4(adapter, A_ESPI_MISC_CONTROL, - espi->misc_ctrl); + writel(((espi->misc_ctrl & ~MON_MASK) | sel), + adapter->regs + A_ESPI_MISC_CONTROL); + sel = readl(adapter->regs + A_ESPI_SCH_TOKEN3); + writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL); } else - sel = t1_read_reg_4(adapter, A_ESPI_SCH_TOKEN3); + sel = readl(adapter->regs + A_ESPI_SCH_TOKEN3); spin_unlock(&espi->lock); return sel; } diff --git a/drivers/net/chelsio/espi.h b/drivers/net/chelsio/espi.h index 0f84e8b6399..c90e37f8457 100644 --- a/drivers/net/chelsio/espi.h +++ b/drivers/net/chelsio/espi.h @@ -1,8 +1,8 @@ /***************************************************************************** * * * File: espi.h * - * $Revision: 1.4 $ * - * $Date: 2005/03/23 07:15:58 $ * + * $Revision: 1.7 $ * + * $Date: 2005/06/21 18:29:47 $ * * Description: * * part of the Chelsio 10Gb Ethernet Driver. * * * @@ -36,8 +36,8 @@ * * ****************************************************************************/ -#ifndef CHELSIO_ESPI_H -#define CHELSIO_ESPI_H +#ifndef _CXGB_ESPI_H_ +#define _CXGB_ESPI_H_ #include "common.h" @@ -60,8 +60,9 @@ void t1_espi_intr_enable(struct peespi *); void t1_espi_intr_clear(struct peespi *); void t1_espi_intr_disable(struct peespi *); int t1_espi_intr_handler(struct peespi *); +const struct espi_intr_counts *t1_espi_get_intr_counts(struct peespi *espi); void t1_espi_set_misc_ctrl(adapter_t *adapter, u32 val); u32 t1_espi_get_mon(adapter_t *adapter, u32 addr, u8 wait); -#endif +#endif /* _CXGB_ESPI_H_ */ diff --git a/drivers/net/chelsio/gmac.h b/drivers/net/chelsio/gmac.h index 24501e2232c..746b0eeea96 100644 --- a/drivers/net/chelsio/gmac.h +++ b/drivers/net/chelsio/gmac.h @@ -1,8 +1,8 @@ /***************************************************************************** * * * File: gmac.h * - * $Revision: 1.3 $ * - * $Date: 2005/03/23 07:15:58 $ * + * $Revision: 1.6 $ * + * $Date: 2005/06/21 18:29:47 $ * * Description: * * Generic MAC functionality. * * part of the Chelsio 10Gb Ethernet Driver. * @@ -37,8 +37,8 @@ * * ****************************************************************************/ -#ifndef CHELSIO_GMAC_H -#define CHELSIO_GMAC_H +#ifndef _CXGB_GMAC_H_ +#define _CXGB_GMAC_H_ #include "common.h" @@ -130,4 +130,5 @@ extern struct gmac t1_chelsio_mac_ops; extern struct gmac t1_vsc7321_ops; extern struct gmac t1_ixf1010_ops; extern struct gmac t1_dummy_mac_ops; -#endif + +#endif /* _CXGB_GMAC_H_ */ diff --git a/drivers/net/chelsio/mv88x201x.c b/drivers/net/chelsio/mv88x201x.c index f54133af1bc..db503428278 100644 --- a/drivers/net/chelsio/mv88x201x.c +++ b/drivers/net/chelsio/mv88x201x.c @@ -1,8 +1,8 @@ /***************************************************************************** * * * File: mv88x201x.c * - * $Revision: 1.7 $ * - * $Date: 2005/03/23 07:15:59 $ * + * $Revision: 1.12 $ * + * $Date: 2005/04/15 19:27:14 $ * * Description: * * Marvell PHY (mv88x201x) functionality. * * part of the Chelsio 10Gb Ethernet Driver. * @@ -85,33 +85,29 @@ static int mv88x201x_reset(struct cphy *cphy, int wait) static int mv88x201x_interrupt_enable(struct cphy *cphy) { + u32 elmer; + /* Enable PHY LASI interrupts. */ mdio_write(cphy, 0x1, 0x9002, 0x1); /* Enable Marvell interrupts through Elmer0. */ - if (t1_is_asic(cphy->adapter)) { - u32 elmer; - - t1_tpi_read(cphy->adapter, A_ELMER0_INT_ENABLE, &elmer); - elmer |= ELMER0_GP_BIT6; - t1_tpi_write(cphy->adapter, A_ELMER0_INT_ENABLE, elmer); - } + t1_tpi_read(cphy->adapter, A_ELMER0_INT_ENABLE, &elmer); + elmer |= ELMER0_GP_BIT6; + t1_tpi_write(cphy->adapter, A_ELMER0_INT_ENABLE, elmer); return 0; } static int mv88x201x_interrupt_disable(struct cphy *cphy) { + u32 elmer; + /* Disable PHY LASI interrupts. */ mdio_write(cphy, 0x1, 0x9002, 0x0); /* Disable Marvell interrupts through Elmer0. */ - if (t1_is_asic(cphy->adapter)) { - u32 elmer; - - t1_tpi_read(cphy->adapter, A_ELMER0_INT_ENABLE, &elmer); - elmer &= ~ELMER0_GP_BIT6; - t1_tpi_write(cphy->adapter, A_ELMER0_INT_ENABLE, elmer); - } + t1_tpi_read(cphy->adapter, A_ELMER0_INT_ENABLE, &elmer); + elmer &= ~ELMER0_GP_BIT6; + t1_tpi_write(cphy->adapter, A_ELMER0_INT_ENABLE, elmer); return 0; } @@ -144,11 +140,9 @@ static int mv88x201x_interrupt_clear(struct cphy *cphy) #endif /* Clear Marvell interrupts through Elmer0. */ - if (t1_is_asic(cphy->adapter)) { - t1_tpi_read(cphy->adapter, A_ELMER0_INT_CAUSE, &elmer); - elmer |= ELMER0_GP_BIT6; - t1_tpi_write(cphy->adapter, A_ELMER0_INT_CAUSE, elmer); - } + t1_tpi_read(cphy->adapter, A_ELMER0_INT_CAUSE, &elmer); + elmer |= ELMER0_GP_BIT6; + t1_tpi_write(cphy->adapter, A_ELMER0_INT_CAUSE, elmer); return 0; } diff --git a/drivers/net/chelsio/osdep.h b/drivers/net/chelsio/osdep.h deleted file mode 100644 index 095cb474434..00000000000 --- a/drivers/net/chelsio/osdep.h +++ /dev/null @@ -1,169 +0,0 @@ -/***************************************************************************** - * * - * File: osdep.h * - * $Revision: 1.9 $ * - * $Date: 2005/03/23 07:41:27 $ * - * Description: * - * part of the Chelsio 10Gb Ethernet Driver. * - * * - * This program is free software; you can redistribute it and/or modify * - * it under the terms of the GNU General Public License, version 2, as * - * published by the Free Software Foundation. * - * * - * You should have received a copy of the GNU General Public License along * - * with this program; if not, write to the Free Software Foundation, Inc., * - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * - * * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * - * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * - * * - * http://www.chelsio.com * - * * - * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * - * All rights reserved. * - * * - * Maintainers: maintainers@chelsio.com * - * * - * Authors: Dimitrios Michailidis * - * Tina Yang * - * Felix Marti * - * Scott Bardone * - * Kurt Ottaway * - * Frank DiMambro * - * * - * History: * - * * - ****************************************************************************/ - -#ifndef __CHELSIO_OSDEP_H -#define __CHELSIO_OSDEP_H - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "cxgb2.h" - -#define DRV_NAME "cxgb" -#define PFX DRV_NAME ": " - -#define CH_ERR(fmt, ...) printk(KERN_ERR PFX fmt, ## __VA_ARGS__) -#define CH_WARN(fmt, ...) printk(KERN_WARNING PFX fmt, ## __VA_ARGS__) -#define CH_ALERT(fmt, ...) printk(KERN_ALERT PFX fmt, ## __VA_ARGS__) - -/* - * More powerful macro that selectively prints messages based on msg_enable. - * For info and debugging messages. - */ -#define CH_MSG(adapter, level, category, fmt, ...) do { \ - if ((adapter)->msg_enable & NETIF_MSG_##category) \ - printk(KERN_##level PFX "%s: " fmt, (adapter)->name, \ - ## __VA_ARGS__); \ -} while (0) - -#ifdef DEBUG -# define CH_DBG(adapter, category, fmt, ...) \ - CH_MSG(adapter, DEBUG, category, fmt, ## __VA_ARGS__) -#else -# define CH_DBG(fmt, ...) -#endif - -/* Additional NETIF_MSG_* categories */ -#define NETIF_MSG_MMIO 0x8000000 - -#define CH_DEVICE(devid, ssid, idx) \ - { PCI_VENDOR_ID_CHELSIO, devid, PCI_ANY_ID, ssid, 0, 0, idx } - -#define SUPPORTED_PAUSE (1 << 13) -#define SUPPORTED_LOOPBACK (1 << 15) - -#define ADVERTISED_PAUSE (1 << 13) -#define ADVERTISED_ASYM_PAUSE (1 << 14) - -/* - * Now that we have included the driver's main data structure, - * we typedef it to something the rest of the system understands. - */ -typedef struct adapter adapter_t; - -#define TPI_LOCK(adapter) spin_lock(&(adapter)->tpi_lock) -#define TPI_UNLOCK(adapter) spin_unlock(&(adapter)->tpi_lock) - -void t1_elmer0_ext_intr(adapter_t *adapter); -void t1_link_changed(adapter_t *adapter, int port_id, int link_status, - int speed, int duplex, int fc); - -static inline u16 t1_read_reg_2(adapter_t *adapter, u32 reg_addr) -{ - u16 val = readw(adapter->regs + reg_addr); - - CH_DBG(adapter, MMIO, "read register 0x%x value 0x%x\n", reg_addr, - val); - return val; -} - -static inline void t1_write_reg_2(adapter_t *adapter, u32 reg_addr, u16 val) -{ - CH_DBG(adapter, MMIO, "setting register 0x%x to 0x%x\n", reg_addr, - val); - writew(val, adapter->regs + reg_addr); -} - -static inline u32 t1_read_reg_4(adapter_t *adapter, u32 reg_addr) -{ - u32 val = readl(adapter->regs + reg_addr); - - CH_DBG(adapter, MMIO, "read register 0x%x value 0x%x\n", reg_addr, - val); - return val; -} - -static inline void t1_write_reg_4(adapter_t *adapter, u32 reg_addr, u32 val) -{ - CH_DBG(adapter, MMIO, "setting register 0x%x to 0x%x\n", reg_addr, - val); - writel(val, adapter->regs + reg_addr); -} - -static inline const char *port_name(adapter_t *adapter, int port_idx) -{ - return adapter->port[port_idx].dev->name; -} - -static inline void t1_set_hw_addr(adapter_t *adapter, int port_idx, - u8 hw_addr[]) -{ - memcpy(adapter->port[port_idx].dev->dev_addr, hw_addr, ETH_ALEN); -} - -struct t1_rx_mode { - struct net_device *dev; - u32 idx; - struct dev_mc_list *list; -}; - -#define t1_rx_mode_promisc(rm) (rm->dev->flags & IFF_PROMISC) -#define t1_rx_mode_allmulti(rm) (rm->dev->flags & IFF_ALLMULTI) -#define t1_rx_mode_mc_cnt(rm) (rm->dev->mc_count) - -static inline u8 *t1_get_next_mcaddr(struct t1_rx_mode *rm) -{ - u8 *addr = 0; - - if (rm->idx++ < rm->dev->mc_count) { - addr = rm->list->dmi_addr; - rm->list = rm->list->next; - } - return addr; -} - -#endif diff --git a/drivers/net/chelsio/pm3393.c b/drivers/net/chelsio/pm3393.c index 17bd20f60d9..04a1404fc65 100644 --- a/drivers/net/chelsio/pm3393.c +++ b/drivers/net/chelsio/pm3393.c @@ -1,8 +1,8 @@ /***************************************************************************** * * * File: pm3393.c * - * $Revision: 1.9 $ * - * $Date: 2005/03/23 07:41:27 $ * + * $Revision: 1.16 $ * + * $Date: 2005/05/14 00:59:32 $ * * Description: * * PMC/SIERRA (pm3393) MAC-PHY functionality. * * part of the Chelsio 10Gb Ethernet Driver. * @@ -45,15 +45,19 @@ /* 802.3ae 10Gb/s MDIO Manageable Device(MMD) */ -#define MMD_RESERVED 0 -#define MMD_PMAPMD 1 -#define MMD_WIS 2 -#define MMD_PCS 3 -#define MMD_PHY_XGXS 4 /* XGMII Extender Sublayer */ -#define MMD_DTE_XGXS 5 +enum { + MMD_RESERVED, + MMD_PMAPMD, + MMD_WIS, + MMD_PCS, + MMD_PHY_XGXS, /* XGMII Extender Sublayer */ + MMD_DTE_XGXS, +}; -#define PHY_XGXS_CTRL_1 0 -#define PHY_XGXS_STATUS_1 1 +enum { + PHY_XGXS_CTRL_1, + PHY_XGXS_STATUS_1 +}; #define OFFSET(REG_ADDR) (REG_ADDR << 2) @@ -160,9 +164,9 @@ static int pm3393_interrupt_enable(struct cmac *cmac) 0 /*SUNI1x10GEXP_BITMSK_TOP_INTE */ ); /* TERMINATOR - PL_INTERUPTS_EXT */ - pl_intr = t1_read_reg_4(cmac->adapter, A_PL_ENABLE); + pl_intr = readl(cmac->adapter->regs + A_PL_ENABLE); pl_intr |= F_PL_INTR_EXT; - t1_write_reg_4(cmac->adapter, A_PL_ENABLE, pl_intr); + writel(pl_intr, cmac->adapter->regs + A_PL_ENABLE); return 0; } @@ -242,9 +246,9 @@ static int pm3393_interrupt_clear(struct cmac *cmac) /* TERMINATOR - PL_INTERUPTS_EXT */ - pl_intr = t1_read_reg_4(cmac->adapter, A_PL_CAUSE); + pl_intr = readl(cmac->adapter->regs + A_PL_CAUSE); pl_intr |= F_PL_INTR_EXT; - t1_write_reg_4(cmac->adapter, A_PL_CAUSE, pl_intr); + writel(pl_intr, cmac->adapter->regs + A_PL_CAUSE); return 0; } @@ -261,8 +265,6 @@ static int pm3393_interrupt_handler(struct cmac *cmac) /* Read the master interrupt status register. */ pmread(cmac, SUNI1x10GEXP_REG_MASTER_INTERRUPT_STATUS, &master_intr_status); - CH_DBG(cmac->adapter, INTR, "PM3393 intr cause 0x%x\n", - master_intr_status); /* TBD XXX Lets just clear everything for now */ pm3393_interrupt_clear(cmac); @@ -703,10 +705,9 @@ static struct cmac *pm3393_mac_create(adapter_t *adapter, int index) t1_tpi_write(adapter, OFFSET(0x3040), 0x0c32); /* # TXXG Config */ /* For T1 use timer based Mac flow control. */ - if (t1_is_T1B(adapter)) - t1_tpi_write(adapter, OFFSET(0x304d), 0x8000); + t1_tpi_write(adapter, OFFSET(0x304d), 0x8000); t1_tpi_write(adapter, OFFSET(0x2040), 0x059c); /* # RXXG Config */ - t1_tpi_write(adapter, OFFSET(0x2049), 0x0000); /* # RXXG Cut Through */ + t1_tpi_write(adapter, OFFSET(0x2049), 0x0001); /* # RXXG Cut Through */ t1_tpi_write(adapter, OFFSET(0x2070), 0x0000); /* # Disable promiscuous mode */ /* Setup Exact Match Filter 0 to allow broadcast packets. @@ -814,12 +815,6 @@ static int pm3393_mac_reset(adapter_t * adapter) successful_reset = (is_pl4_reset_finished && !is_pl4_outof_lock && is_xaui_mabc_pll_locked); - - CH_DBG(adapter, HW, - "PM3393 HW reset %d: pl4_reset 0x%x, val 0x%x, " - "is_pl4_outof_lock 0x%x, xaui_locked 0x%x\n", - i, is_pl4_reset_finished, val, is_pl4_outof_lock, - is_xaui_mabc_pll_locked); } return successful_reset ? 0 : 1; } diff --git a/drivers/net/chelsio/regs.h b/drivers/net/chelsio/regs.h index 5a70803eb1b..b90e11f40d1 100644 --- a/drivers/net/chelsio/regs.h +++ b/drivers/net/chelsio/regs.h @@ -1,8 +1,8 @@ /***************************************************************************** * * * File: regs.h * - * $Revision: 1.4 $ * - * $Date: 2005/03/23 07:15:59 $ * + * $Revision: 1.8 $ * + * $Date: 2005/06/21 18:29:48 $ * * Description: * * part of the Chelsio 10Gb Ethernet Driver. * * * @@ -36,7 +36,8 @@ * * ****************************************************************************/ -/* Do not edit this file */ +#ifndef _CXGB_REGS_H_ +#define _CXGB_REGS_H_ /* SGE registers */ #define A_SG_CONTROL 0x0 @@ -74,6 +75,14 @@ #define V_DISABLE_CMDQ1_GTS(x) ((x) << S_DISABLE_CMDQ1_GTS) #define F_DISABLE_CMDQ1_GTS V_DISABLE_CMDQ1_GTS(1U) +#define S_DISABLE_FL0_GTS 10 +#define V_DISABLE_FL0_GTS(x) ((x) << S_DISABLE_FL0_GTS) +#define F_DISABLE_FL0_GTS V_DISABLE_FL0_GTS(1U) + +#define S_DISABLE_FL1_GTS 11 +#define V_DISABLE_FL1_GTS(x) ((x) << S_DISABLE_FL1_GTS) +#define F_DISABLE_FL1_GTS V_DISABLE_FL1_GTS(1U) + #define S_ENABLE_BIG_ENDIAN 12 #define V_ENABLE_BIG_ENDIAN(x) ((x) << S_ENABLE_BIG_ENDIAN) #define F_ENABLE_BIG_ENDIAN V_ENABLE_BIG_ENDIAN(1U) @@ -132,6 +141,7 @@ #define F_PACKET_MISMATCH V_PACKET_MISMATCH(1U) #define A_SG_INT_CAUSE 0xbc +#define A_SG_RESPACCUTIMER 0xc0 /* MC3 registers */ @@ -247,6 +257,10 @@ #define V_SYN_COOKIE_PARAMETER(x) ((x) << S_SYN_COOKIE_PARAMETER) #define A_TP_PC_CONFIG 0x348 +#define S_DIS_TX_FILL_WIN_PUSH 12 +#define V_DIS_TX_FILL_WIN_PUSH(x) ((x) << S_DIS_TX_FILL_WIN_PUSH) +#define F_DIS_TX_FILL_WIN_PUSH V_DIS_TX_FILL_WIN_PUSH(1U) + #define S_TP_PC_REV 30 #define M_TP_PC_REV 0x3 #define G_TP_PC_REV(x) (((x) >> S_TP_PC_REV) & M_TP_PC_REV) @@ -451,3 +465,4 @@ #define M_PCI_MODE_CLK 0x3 #define G_PCI_MODE_CLK(x) (((x) >> S_PCI_MODE_CLK) & M_PCI_MODE_CLK) +#endif /* _CXGB_REGS_H_ */ diff --git a/drivers/net/chelsio/sge.c b/drivers/net/chelsio/sge.c index bcf8b1e939b..53b41d99b00 100644 --- a/drivers/net/chelsio/sge.c +++ b/drivers/net/chelsio/sge.c @@ -1,8 +1,8 @@ /***************************************************************************** * * * File: sge.c * - * $Revision: 1.13 $ * - * $Date: 2005/03/23 07:41:27 $ * + * $Revision: 1.26 $ * + * $Date: 2005/06/21 18:29:48 $ * * Description: * * DMA engine. * * part of the Chelsio 10Gb Ethernet Driver. * @@ -58,59 +58,62 @@ #include "regs.h" #include "espi.h" + +#ifdef NETIF_F_TSO #include +#endif #define SGE_CMDQ_N 2 #define SGE_FREELQ_N 2 -#define SGE_CMDQ0_E_N 512 +#define SGE_CMDQ0_E_N 1024 #define SGE_CMDQ1_E_N 128 #define SGE_FREEL_SIZE 4096 #define SGE_JUMBO_FREEL_SIZE 512 #define SGE_FREEL_REFILL_THRESH 16 #define SGE_RESPQ_E_N 1024 -#define SGE_INTR_BUCKETSIZE 100 -#define SGE_INTR_LATBUCKETS 5 -#define SGE_INTR_MAXBUCKETS 11 -#define SGE_INTRTIMER0 1 -#define SGE_INTRTIMER1 50 -#define SGE_INTRTIMER_NRES 10000 -#define SGE_RX_COPY_THRESHOLD 256 +#define SGE_INTRTIMER_NRES 1000 +#define SGE_RX_COPY_THRES 256 #define SGE_RX_SM_BUF_SIZE 1536 -#define SGE_RESPQ_REPLENISH_THRES ((3 * SGE_RESPQ_E_N) / 4) +# define SGE_RX_DROP_THRES 2 + +#define SGE_RESPQ_REPLENISH_THRES (SGE_RESPQ_E_N / 4) + +/* + * Period of the TX buffer reclaim timer. This timer does not need to run + * frequently as TX buffers are usually reclaimed by new TX packets. + */ +#define TX_RECLAIM_PERIOD (HZ / 4) -#define SGE_RX_OFFSET 2 #ifndef NET_IP_ALIGN -# define NET_IP_ALIGN SGE_RX_OFFSET +# define NET_IP_ALIGN 2 #endif +#define M_CMD_LEN 0x7fffffff +#define V_CMD_LEN(v) (v) +#define G_CMD_LEN(v) ((v) & M_CMD_LEN) +#define V_CMD_GEN1(v) ((v) << 31) +#define V_CMD_GEN2(v) (v) +#define F_CMD_DATAVALID (1 << 1) +#define F_CMD_SOP (1 << 2) +#define V_CMD_EOP(v) ((v) << 3) + /* - * Memory Mapped HW Command, Freelist and Response Queue Descriptors + * Command queue, receive buffer list, and response queue descriptors. */ #if defined(__BIG_ENDIAN_BITFIELD) struct cmdQ_e { - u32 AddrLow; - u32 GenerationBit : 1; - u32 BufferLength : 31; - u32 RespQueueSelector : 4; - u32 ResponseTokens : 12; - u32 CmdId : 8; - u32 Reserved : 3; - u32 TokenValid : 1; - u32 Eop : 1; - u32 Sop : 1; - u32 DataValid : 1; - u32 GenerationBit2 : 1; - u32 AddrHigh; + u32 addr_lo; + u32 len_gen; + u32 flags; + u32 addr_hi; }; struct freelQ_e { - u32 AddrLow; - u32 GenerationBit : 1; - u32 BufferLength : 31; - u32 Reserved : 31; - u32 GenerationBit2 : 1; - u32 AddrHigh; + u32 addr_lo; + u32 len_gen; + u32 gen2; + u32 addr_hi; }; struct respQ_e { @@ -128,31 +131,19 @@ struct respQ_e { u32 GenerationBit : 1; u32 BufferLength; }; - #elif defined(__LITTLE_ENDIAN_BITFIELD) struct cmdQ_e { - u32 BufferLength : 31; - u32 GenerationBit : 1; - u32 AddrLow; - u32 AddrHigh; - u32 GenerationBit2 : 1; - u32 DataValid : 1; - u32 Sop : 1; - u32 Eop : 1; - u32 TokenValid : 1; - u32 Reserved : 3; - u32 CmdId : 8; - u32 ResponseTokens : 12; - u32 RespQueueSelector : 4; + u32 len_gen; + u32 addr_lo; + u32 addr_hi; + u32 flags; }; struct freelQ_e { - u32 BufferLength : 31; - u32 GenerationBit : 1; - u32 AddrLow; - u32 AddrHigh; - u32 GenerationBit2 : 1; - u32 Reserved : 31; + u32 len_gen; + u32 addr_lo; + u32 addr_hi; + u32 gen2; }; struct respQ_e { @@ -179,7 +170,6 @@ struct cmdQ_ce { struct sk_buff *skb; DECLARE_PCI_UNMAP_ADDR(dma_addr); DECLARE_PCI_UNMAP_LEN(dma_len); - unsigned int single; }; struct freelQ_ce { @@ -189,44 +179,52 @@ struct freelQ_ce { }; /* - * SW Command, Freelist and Response Queue + * SW command, freelist and response rings */ struct cmdQ { - atomic_t asleep; /* HW DMA Fetch status */ - atomic_t credits; /* # available descriptors for TX */ - atomic_t pio_pidx; /* Variable updated on Doorbell */ - u16 entries_n; /* # descriptors for TX */ - u16 pidx; /* producer index (SW) */ - u16 cidx; /* consumer index (HW) */ - u8 genbit; /* current generation (=valid) bit */ - struct cmdQ_e *entries; /* HW command descriptor Q */ - struct cmdQ_ce *centries; /* SW command context descriptor Q */ - spinlock_t Qlock; /* Lock to protect cmdQ enqueuing */ - dma_addr_t dma_addr; /* DMA addr HW command descriptor Q */ + unsigned long status; /* HW DMA fetch status */ + unsigned int in_use; /* # of in-use command descriptors */ + unsigned int size; /* # of descriptors */ + unsigned int processed; /* total # of descs HW has processed */ + unsigned int cleaned; /* total # of descs SW has reclaimed */ + unsigned int stop_thres; /* SW TX queue suspend threshold */ + u16 pidx; /* producer index (SW) */ + u16 cidx; /* consumer index (HW) */ + u8 genbit; /* current generation (=valid) bit */ + u8 sop; /* is next entry start of packet? */ + struct cmdQ_e *entries; /* HW command descriptor Q */ + struct cmdQ_ce *centries; /* SW command context descriptor Q */ + spinlock_t lock; /* Lock to protect cmdQ enqueuing */ + dma_addr_t dma_addr; /* DMA addr HW command descriptor Q */ }; struct freelQ { - unsigned int credits; /* # of available RX buffers */ - unsigned int entries_n; /* free list capacity */ - u16 pidx; /* producer index (SW) */ - u16 cidx; /* consumer index (HW) */ + unsigned int credits; /* # of available RX buffers */ + unsigned int size; /* free list capacity */ + u16 pidx; /* producer index (SW) */ + u16 cidx; /* consumer index (HW) */ u16 rx_buffer_size; /* Buffer size on this free list */ u16 dma_offset; /* DMA offset to align IP headers */ - u8 genbit; /* current generation (=valid) bit */ - struct freelQ_e *entries; /* HW freelist descriptor Q */ - struct freelQ_ce *centries; /* SW freelist conext descriptor Q */ - dma_addr_t dma_addr; /* DMA addr HW freelist descriptor Q */ + u16 recycleq_idx; /* skb recycle q to use */ + u8 genbit; /* current generation (=valid) bit */ + struct freelQ_e *entries; /* HW freelist descriptor Q */ + struct freelQ_ce *centries; /* SW freelist context descriptor Q */ + dma_addr_t dma_addr; /* DMA addr HW freelist descriptor Q */ }; struct respQ { - u16 credits; /* # of available respQ descriptors */ - u16 credits_pend; /* # of not yet returned descriptors */ - u16 entries_n; /* # of response Q descriptors */ - u16 pidx; /* producer index (HW) */ - u16 cidx; /* consumer index (SW) */ - u8 genbit; /* current generation(=valid) bit */ + unsigned int credits; /* credits to be returned to SGE */ + unsigned int size; /* # of response Q descriptors */ + u16 cidx; /* consumer index (SW) */ + u8 genbit; /* current generation(=valid) bit */ struct respQ_e *entries; /* HW response descriptor Q */ - dma_addr_t dma_addr; /* DMA addr HW response descriptor Q */ + dma_addr_t dma_addr; /* DMA addr HW response descriptor Q */ +}; + +/* Bit flags for cmdQ.status */ +enum { + CMDQ_STAT_RUNNING = 1, /* fetch engine is running */ + CMDQ_STAT_LAST_PKT_DB = 2 /* last packet rung the doorbell */ }; /* @@ -239,134 +237,50 @@ struct respQ { */ struct sge { struct adapter *adapter; /* adapter backpointer */ - struct freelQ freelQ[SGE_FREELQ_N]; /* freelist Q(s) */ - struct respQ respQ; /* response Q instatiation */ + struct net_device *netdev; /* netdevice backpointer */ + struct freelQ freelQ[SGE_FREELQ_N]; /* buffer free lists */ + struct respQ respQ; /* response Q */ + unsigned long stopped_tx_queues; /* bitmap of suspended Tx queues */ unsigned int rx_pkt_pad; /* RX padding for L2 packets */ unsigned int jumbo_fl; /* jumbo freelist Q index */ - u32 intrtimer[SGE_INTR_MAXBUCKETS]; /* ! */ - u32 currIndex; /* current index into intrtimer[] */ - u32 intrtimer_nres; /* no resource interrupt timer value */ - u32 sge_control; /* shadow content of sge control reg */ - struct sge_intr_counts intr_cnt; - struct timer_list ptimer; - struct sk_buff *pskb; - u32 ptimeout; - struct cmdQ cmdQ[SGE_CMDQ_N] ____cacheline_aligned; /* command Q(s)*/ + unsigned int intrtimer_nres; /* no-resource interrupt timer */ + unsigned int fixed_intrtimer;/* non-adaptive interrupt timer */ + struct timer_list tx_reclaim_timer; /* reclaims TX buffers */ + struct timer_list espibug_timer; + unsigned int espibug_timeout; + struct sk_buff *espibug_skb; + u32 sge_control; /* shadow value of sge control reg */ + struct sge_intr_counts stats; + struct sge_port_stats port_stats[MAX_NPORTS]; + struct cmdQ cmdQ[SGE_CMDQ_N] ____cacheline_aligned_in_smp; }; -static unsigned int t1_sge_tx(struct sk_buff *skb, struct adapter *adapter, - unsigned int qid); - /* * PIO to indicate that memory mapped Q contains valid descriptor(s). */ -static inline void doorbell_pio(struct sge *sge, u32 val) +static inline void doorbell_pio(struct adapter *adapter, u32 val) { wmb(); - t1_write_reg_4(sge->adapter, A_SG_DOORBELL, val); -} - -/* - * Disables the DMA engine. - */ -void t1_sge_stop(struct sge *sge) -{ - t1_write_reg_4(sge->adapter, A_SG_CONTROL, 0); - t1_read_reg_4(sge->adapter, A_SG_CONTROL); /* flush write */ - if (is_T2(sge->adapter)) - del_timer_sync(&sge->ptimer); -} - -static u8 ch_mac_addr[ETH_ALEN] = {0x0, 0x7, 0x43, 0x0, 0x0, 0x0}; -static void t1_espi_workaround(void *data) -{ - struct adapter *adapter = (struct adapter *)data; - struct sge *sge = adapter->sge; - - if (netif_running(adapter->port[0].dev) && - atomic_read(&sge->cmdQ[0].asleep)) { - - u32 seop = t1_espi_get_mon(adapter, 0x930, 0); - - if ((seop & 0xfff0fff) == 0xfff && sge->pskb) { - struct sk_buff *skb = sge->pskb; - if (!skb->cb[0]) { - memcpy(skb->data+sizeof(struct cpl_tx_pkt), ch_mac_addr, ETH_ALEN); - memcpy(skb->data+skb->len-10, ch_mac_addr, ETH_ALEN); - - skb->cb[0] = 0xff; - } - t1_sge_tx(skb, adapter,0); - } - } - mod_timer(&adapter->sge->ptimer, jiffies + sge->ptimeout); -} - -/* - * Enables the DMA engine. - */ -void t1_sge_start(struct sge *sge) -{ - t1_write_reg_4(sge->adapter, A_SG_CONTROL, sge->sge_control); - t1_read_reg_4(sge->adapter, A_SG_CONTROL); /* flush write */ - if (is_T2(sge->adapter)) { - init_timer(&sge->ptimer); - sge->ptimer.function = (void *)&t1_espi_workaround; - sge->ptimer.data = (unsigned long)sge->adapter; - sge->ptimer.expires = jiffies + sge->ptimeout; - add_timer(&sge->ptimer); - } -} - -/* - * Creates a t1_sge structure and returns suggested resource parameters. - */ -struct sge * __devinit t1_sge_create(struct adapter *adapter, - struct sge_params *p) -{ - struct sge *sge = kmalloc(sizeof(*sge), GFP_KERNEL); - - if (!sge) - return NULL; - memset(sge, 0, sizeof(*sge)); - - if (is_T2(adapter)) - sge->ptimeout = 1; /* finest allowed */ - - sge->adapter = adapter; - sge->rx_pkt_pad = t1_is_T1B(adapter) ? 0 : SGE_RX_OFFSET; - sge->jumbo_fl = t1_is_T1B(adapter) ? 1 : 0; - - p->cmdQ_size[0] = SGE_CMDQ0_E_N; - p->cmdQ_size[1] = SGE_CMDQ1_E_N; - p->freelQ_size[!sge->jumbo_fl] = SGE_FREEL_SIZE; - p->freelQ_size[sge->jumbo_fl] = SGE_JUMBO_FREEL_SIZE; - p->rx_coalesce_usecs = SGE_INTRTIMER1; - p->last_rx_coalesce_raw = SGE_INTRTIMER1 * - (board_info(sge->adapter)->clock_core / 1000000); - p->default_rx_coalesce_usecs = SGE_INTRTIMER1; - p->coalesce_enable = 0; /* Turn off adaptive algorithm by default */ - p->sample_interval_usecs = 0; - return sge; + writel(val, adapter->regs + A_SG_DOORBELL); } /* * Frees all RX buffers on the freelist Q. The caller must make sure that * the SGE is turned off before calling this function. */ -static void free_freelQ_buffers(struct pci_dev *pdev, struct freelQ *Q) +static void free_freelQ_buffers(struct pci_dev *pdev, struct freelQ *q) { - unsigned int cidx = Q->cidx, credits = Q->credits; + unsigned int cidx = q->cidx; - while (credits--) { - struct freelQ_ce *ce = &Q->centries[cidx]; + while (q->credits--) { + struct freelQ_ce *ce = &q->centries[cidx]; pci_unmap_single(pdev, pci_unmap_addr(ce, dma_addr), pci_unmap_len(ce, dma_len), PCI_DMA_FROMDEVICE); dev_kfree_skb(ce->skb); ce->skb = NULL; - if (++cidx == Q->entries_n) + if (++cidx == q->size) cidx = 0; } } @@ -380,29 +294,29 @@ static void free_rx_resources(struct sge *sge) unsigned int size, i; if (sge->respQ.entries) { - size = sizeof(struct respQ_e) * sge->respQ.entries_n; + size = sizeof(struct respQ_e) * sge->respQ.size; pci_free_consistent(pdev, size, sge->respQ.entries, sge->respQ.dma_addr); } for (i = 0; i < SGE_FREELQ_N; i++) { - struct freelQ *Q = &sge->freelQ[i]; + struct freelQ *q = &sge->freelQ[i]; - if (Q->centries) { - free_freelQ_buffers(pdev, Q); - kfree(Q->centries); + if (q->centries) { + free_freelQ_buffers(pdev, q); + kfree(q->centries); } - if (Q->entries) { - size = sizeof(struct freelQ_e) * Q->entries_n; - pci_free_consistent(pdev, size, Q->entries, - Q->dma_addr); + if (q->entries) { + size = sizeof(struct freelQ_e) * q->size; + pci_free_consistent(pdev, size, q->entries, + q->dma_addr); } } } /* * Allocates basic RX resources, consisting of memory mapped freelist Qs and a - * response Q. + * response queue. */ static int alloc_rx_resources(struct sge *sge, struct sge_params *p) { @@ -410,21 +324,22 @@ static int alloc_rx_resources(struct sge *sge, struct sge_params *p) unsigned int size, i; for (i = 0; i < SGE_FREELQ_N; i++) { - struct freelQ *Q = &sge->freelQ[i]; - - Q->genbit = 1; - Q->entries_n = p->freelQ_size[i]; - Q->dma_offset = SGE_RX_OFFSET - sge->rx_pkt_pad; - size = sizeof(struct freelQ_e) * Q->entries_n; - Q->entries = (struct freelQ_e *) - pci_alloc_consistent(pdev, size, &Q->dma_addr); - if (!Q->entries) + struct freelQ *q = &sge->freelQ[i]; + + q->genbit = 1; + q->size = p->freelQ_size[i]; + q->dma_offset = sge->rx_pkt_pad ? 0 : NET_IP_ALIGN; + size = sizeof(struct freelQ_e) * q->size; + q->entries = (struct freelQ_e *) + pci_alloc_consistent(pdev, size, &q->dma_addr); + if (!q->entries) goto err_no_mem; - memset(Q->entries, 0, size); - Q->centries = kcalloc(Q->entries_n, sizeof(struct freelQ_ce), - GFP_KERNEL); - if (!Q->centries) + memset(q->entries, 0, size); + size = sizeof(struct freelQ_ce) * q->size; + q->centries = kmalloc(size, GFP_KERNEL); + if (!q->centries) goto err_no_mem; + memset(q->centries, 0, size); } /* @@ -440,10 +355,17 @@ static int alloc_rx_resources(struct sge *sge, struct sge_params *p) sge->freelQ[sge->jumbo_fl].rx_buffer_size = (16 * 1024) - SKB_DATA_ALIGN(sizeof(struct skb_shared_info)); + /* + * Setup which skb recycle Q should be used when recycling buffers from + * each free list. + */ + sge->freelQ[!sge->jumbo_fl].recycleq_idx = 0; + sge->freelQ[sge->jumbo_fl].recycleq_idx = 1; + sge->respQ.genbit = 1; - sge->respQ.entries_n = SGE_RESPQ_E_N; - sge->respQ.credits = SGE_RESPQ_E_N; - size = sizeof(struct respQ_e) * sge->respQ.entries_n; + sge->respQ.size = SGE_RESPQ_E_N; + sge->respQ.credits = 0; + size = sizeof(struct respQ_e) * sge->respQ.size; sge->respQ.entries = (struct respQ_e *) pci_alloc_consistent(pdev, size, &sge->respQ.dma_addr); if (!sge->respQ.entries) @@ -457,48 +379,37 @@ err_no_mem: } /* - * Frees 'credits_pend' TX buffers and returns the credits to Q->credits. - * - * The adaptive algorithm receives the total size of the buffers freed - * accumulated in @*totpayload. No initialization of this argument here. - * + * Reclaims n TX descriptors and frees the buffers associated with them. */ -static void free_cmdQ_buffers(struct sge *sge, struct cmdQ *Q, - unsigned int credits_pend, unsigned int *totpayload) +static void free_cmdQ_buffers(struct sge *sge, struct cmdQ *q, unsigned int n) { + struct cmdQ_ce *ce; struct pci_dev *pdev = sge->adapter->pdev; - struct sk_buff *skb; - struct cmdQ_ce *ce, *cq = Q->centries; - unsigned int entries_n = Q->entries_n, cidx = Q->cidx, - i = credits_pend; - + unsigned int cidx = q->cidx; - ce = &cq[cidx]; - while (i--) { - if (ce->single) + q->in_use -= n; + ce = &q->centries[cidx]; + while (n--) { + if (q->sop) pci_unmap_single(pdev, pci_unmap_addr(ce, dma_addr), - pci_unmap_len(ce, dma_len), + pci_unmap_len(ce, dma_len), PCI_DMA_TODEVICE); else pci_unmap_page(pdev, pci_unmap_addr(ce, dma_addr), - pci_unmap_len(ce, dma_len), + pci_unmap_len(ce, dma_len), PCI_DMA_TODEVICE); - if (totpayload) - *totpayload += pci_unmap_len(ce, dma_len); - - skb = ce->skb; - if (skb) - dev_kfree_skb_irq(skb); - + q->sop = 0; + if (ce->skb) { + dev_kfree_skb(ce->skb); + q->sop = 1; + } ce++; - if (++cidx == entries_n) { + if (++cidx == q->size) { cidx = 0; - ce = cq; + ce = q->centries; } } - - Q->cidx = cidx; - atomic_add(credits_pend, &Q->credits); + q->cidx = cidx; } /* @@ -512,20 +423,17 @@ static void free_tx_resources(struct sge *sge) unsigned int size, i; for (i = 0; i < SGE_CMDQ_N; i++) { - struct cmdQ *Q = &sge->cmdQ[i]; + struct cmdQ *q = &sge->cmdQ[i]; - if (Q->centries) { - unsigned int pending = Q->entries_n - - atomic_read(&Q->credits); - - if (pending) - free_cmdQ_buffers(sge, Q, pending, NULL); - kfree(Q->centries); + if (q->centries) { + if (q->in_use) + free_cmdQ_buffers(sge, q, q->in_use); + kfree(q->centries); } - if (Q->entries) { - size = sizeof(struct cmdQ_e) * Q->entries_n; - pci_free_consistent(pdev, size, Q->entries, - Q->dma_addr); + if (q->entries) { + size = sizeof(struct cmdQ_e) * q->size; + pci_free_consistent(pdev, size, q->entries, + q->dma_addr); } } } @@ -539,25 +447,38 @@ static int alloc_tx_resources(struct sge *sge, struct sge_params *p) unsigned int size, i; for (i = 0; i < SGE_CMDQ_N; i++) { - struct cmdQ *Q = &sge->cmdQ[i]; - - Q->genbit = 1; - Q->entries_n = p->cmdQ_size[i]; - atomic_set(&Q->credits, Q->entries_n); - atomic_set(&Q->asleep, 1); - spin_lock_init(&Q->Qlock); - size = sizeof(struct cmdQ_e) * Q->entries_n; - Q->entries = (struct cmdQ_e *) - pci_alloc_consistent(pdev, size, &Q->dma_addr); - if (!Q->entries) + struct cmdQ *q = &sge->cmdQ[i]; + + q->genbit = 1; + q->sop = 1; + q->size = p->cmdQ_size[i]; + q->in_use = 0; + q->status = 0; + q->processed = q->cleaned = 0; + q->stop_thres = 0; + spin_lock_init(&q->lock); + size = sizeof(struct cmdQ_e) * q->size; + q->entries = (struct cmdQ_e *) + pci_alloc_consistent(pdev, size, &q->dma_addr); + if (!q->entries) goto err_no_mem; - memset(Q->entries, 0, size); - Q->centries = kcalloc(Q->entries_n, sizeof(struct cmdQ_ce), - GFP_KERNEL); - if (!Q->centries) + memset(q->entries, 0, size); + size = sizeof(struct cmdQ_ce) * q->size; + q->centries = kmalloc(size, GFP_KERNEL); + if (!q->centries) goto err_no_mem; + memset(q->centries, 0, size); } + /* + * CommandQ 0 handles Ethernet and TOE packets, while queue 1 is TOE + * only. For queue 0 set the stop threshold so we can handle one more + * packet from each port, plus reserve an additional 24 entries for + * Ethernet packets only. Queue 1 never suspends nor do we reserve + * space for Ethernet packets. + */ + sge->cmdQ[0].stop_thres = sge->adapter->params.nports * + (MAX_SKB_FRAGS + 1); return 0; err_no_mem: @@ -569,9 +490,9 @@ static inline void setup_ring_params(struct adapter *adapter, u64 addr, u32 size, int base_reg_lo, int base_reg_hi, int size_reg) { - t1_write_reg_4(adapter, base_reg_lo, (u32)addr); - t1_write_reg_4(adapter, base_reg_hi, addr >> 32); - t1_write_reg_4(adapter, size_reg, size); + writel((u32)addr, adapter->regs + base_reg_lo); + writel(addr >> 32, adapter->regs + base_reg_hi); + writel(size, adapter->regs + size_reg); } /* @@ -585,29 +506,11 @@ void t1_set_vlan_accel(struct adapter *adapter, int on_off) if (on_off) sge->sge_control |= F_VLAN_XTRACT; if (adapter->open_device_map) { - t1_write_reg_4(adapter, A_SG_CONTROL, sge->sge_control); - t1_read_reg_4(adapter, A_SG_CONTROL); /* flush */ + writel(sge->sge_control, adapter->regs + A_SG_CONTROL); + readl(adapter->regs + A_SG_CONTROL); /* flush */ } } -/* - * Sets the interrupt latency timer when the adaptive Rx coalescing - * is turned off. Do nothing when it is turned on again. - * - * This routine relies on the fact that the caller has already set - * the adaptive policy in adapter->sge_params before calling it. -*/ -int t1_sge_set_coalesce_params(struct sge *sge, struct sge_params *p) -{ - if (!p->coalesce_enable) { - u32 newTimer = p->rx_coalesce_usecs * - (board_info(sge->adapter)->clock_core / 1000000); - - t1_write_reg_4(sge->adapter, A_SG_INTRTIMER, newTimer); - } - return 0; -} - /* * Programs the various SGE registers. However, the engine is not yet enabled, * but sge->sge_control is setup and ready to go. @@ -615,67 +518,40 @@ int t1_sge_set_coalesce_params(struct sge *sge, struct sge_params *p) static void configure_sge(struct sge *sge, struct sge_params *p) { struct adapter *ap = sge->adapter; - int i; - - t1_write_reg_4(ap, A_SG_CONTROL, 0); - setup_ring_params(ap, sge->cmdQ[0].dma_addr, sge->cmdQ[0].entries_n, + + writel(0, ap->regs + A_SG_CONTROL); + setup_ring_params(ap, sge->cmdQ[0].dma_addr, sge->cmdQ[0].size, A_SG_CMD0BASELWR, A_SG_CMD0BASEUPR, A_SG_CMD0SIZE); - setup_ring_params(ap, sge->cmdQ[1].dma_addr, sge->cmdQ[1].entries_n, + setup_ring_params(ap, sge->cmdQ[1].dma_addr, sge->cmdQ[1].size, A_SG_CMD1BASELWR, A_SG_CMD1BASEUPR, A_SG_CMD1SIZE); setup_ring_params(ap, sge->freelQ[0].dma_addr, - sge->freelQ[0].entries_n, A_SG_FL0BASELWR, + sge->freelQ[0].size, A_SG_FL0BASELWR, A_SG_FL0BASEUPR, A_SG_FL0SIZE); setup_ring_params(ap, sge->freelQ[1].dma_addr, - sge->freelQ[1].entries_n, A_SG_FL1BASELWR, + sge->freelQ[1].size, A_SG_FL1BASELWR, A_SG_FL1BASEUPR, A_SG_FL1SIZE); /* The threshold comparison uses <. */ - t1_write_reg_4(ap, A_SG_FLTHRESHOLD, SGE_RX_SM_BUF_SIZE + 1); + writel(SGE_RX_SM_BUF_SIZE + 1, ap->regs + A_SG_FLTHRESHOLD); - setup_ring_params(ap, sge->respQ.dma_addr, sge->respQ.entries_n, - A_SG_RSPBASELWR, A_SG_RSPBASEUPR, A_SG_RSPSIZE); - t1_write_reg_4(ap, A_SG_RSPQUEUECREDIT, (u32)sge->respQ.entries_n); + setup_ring_params(ap, sge->respQ.dma_addr, sge->respQ.size, + A_SG_RSPBASELWR, A_SG_RSPBASEUPR, A_SG_RSPSIZE); + writel((u32)sge->respQ.size - 1, ap->regs + A_SG_RSPQUEUECREDIT); sge->sge_control = F_CMDQ0_ENABLE | F_CMDQ1_ENABLE | F_FL0_ENABLE | F_FL1_ENABLE | F_CPL_ENABLE | F_RESPONSE_QUEUE_ENABLE | V_CMDQ_PRIORITY(2) | F_DISABLE_CMDQ1_GTS | F_ISCSI_COALESCE | + F_DISABLE_FL0_GTS | F_DISABLE_FL1_GTS | V_RX_PKT_OFFSET(sge->rx_pkt_pad); #if defined(__BIG_ENDIAN_BITFIELD) sge->sge_control |= F_ENABLE_BIG_ENDIAN; #endif - /* - * Initialize the SGE Interrupt Timer arrray: - * intrtimer[0] = (SGE_INTRTIMER0) usec - * intrtimer[0intrtimer[0] = board_info(sge->adapter)->clock_core / 1000000; - for (i = 1; i < SGE_INTR_LATBUCKETS; ++i) { - sge->intrtimer[i] = SGE_INTRTIMER0 + (2 * i); - sge->intrtimer[i] *= sge->intrtimer[0]; - } - for (i = SGE_INTR_LATBUCKETS; i < SGE_INTR_MAXBUCKETS - 1; ++i) { - sge->intrtimer[i] = (i - 3) * 6; - sge->intrtimer[i] *= sge->intrtimer[0]; - } - sge->intrtimer[SGE_INTR_MAXBUCKETS - 1] = - sge->intrtimer[0] * SGE_INTRTIMER1; - /* Initialize resource timer */ - sge->intrtimer_nres = sge->intrtimer[0] * SGE_INTRTIMER_NRES; - /* Finally finish initialization of intrtimer[0] */ - sge->intrtimer[0] *= SGE_INTRTIMER0; - /* Initialize for a throughput oriented workload */ - sge->currIndex = SGE_INTR_MAXBUCKETS - 1; - - if (p->coalesce_enable) - t1_write_reg_4(ap, A_SG_INTRTIMER, - sge->intrtimer[sge->currIndex]); - else - t1_sge_set_coalesce_params(sge, p); + /* Initialize no-resource timer */ + sge->intrtimer_nres = SGE_INTRTIMER_NRES * core_ticks_per_usec(ap); + + t1_sge_set_coalesce_params(sge, p); } /* @@ -684,31 +560,8 @@ static void configure_sge(struct sge *sge, struct sge_params *p) static inline unsigned int jumbo_payload_capacity(const struct sge *sge) { return sge->freelQ[sge->jumbo_fl].rx_buffer_size - - sizeof(struct cpl_rx_data) - SGE_RX_OFFSET + sge->rx_pkt_pad; -} - -/* - * Allocates both RX and TX resources and configures the SGE. However, - * the hardware is not enabled yet. - */ -int t1_sge_configure(struct sge *sge, struct sge_params *p) -{ - if (alloc_rx_resources(sge, p)) - return -ENOMEM; - if (alloc_tx_resources(sge, p)) { - free_rx_resources(sge); - return -ENOMEM; - } - configure_sge(sge, p); - - /* - * Now that we have sized the free lists calculate the payload - * capacity of the large buffers. Other parts of the driver use - * this to set the max offload coalescing size so that RX packets - * do not overflow our large buffers. - */ - p->large_buf_capacity = jumbo_payload_capacity(sge); - return 0; + sge->freelQ[sge->jumbo_fl].dma_offset - + sizeof(struct cpl_rx_data); } /* @@ -716,8 +569,9 @@ int t1_sge_configure(struct sge *sge, struct sge_params *p) */ void t1_sge_destroy(struct sge *sge) { - if (sge->pskb) - dev_kfree_skb(sge->pskb); + if (sge->espibug_skb) + kfree_skb(sge->espibug_skb); + free_tx_resources(sge); free_rx_resources(sge); kfree(sge); @@ -735,75 +589,75 @@ void t1_sge_destroy(struct sge *sge) * we specify a RX_OFFSET in order to make sure that the IP header is 4B * aligned. */ -static void refill_free_list(struct sge *sge, struct freelQ *Q) +static void refill_free_list(struct sge *sge, struct freelQ *q) { struct pci_dev *pdev = sge->adapter->pdev; - struct freelQ_ce *ce = &Q->centries[Q->pidx]; - struct freelQ_e *e = &Q->entries[Q->pidx]; - unsigned int dma_len = Q->rx_buffer_size - Q->dma_offset; + struct freelQ_ce *ce = &q->centries[q->pidx]; + struct freelQ_e *e = &q->entries[q->pidx]; + unsigned int dma_len = q->rx_buffer_size - q->dma_offset; - while (Q->credits < Q->entries_n) { - if (e->GenerationBit != Q->genbit) { - struct sk_buff *skb; - dma_addr_t mapping; + while (q->credits < q->size) { + struct sk_buff *skb; + dma_addr_t mapping; - skb = alloc_skb(Q->rx_buffer_size, GFP_ATOMIC); - if (!skb) - break; - if (Q->dma_offset) - skb_reserve(skb, Q->dma_offset); - mapping = pci_map_single(pdev, skb->data, dma_len, - PCI_DMA_FROMDEVICE); - ce->skb = skb; - pci_unmap_addr_set(ce, dma_addr, mapping); - pci_unmap_len_set(ce, dma_len, dma_len); - e->AddrLow = (u32)mapping; - e->AddrHigh = (u64)mapping >> 32; - e->BufferLength = dma_len; - e->GenerationBit = e->GenerationBit2 = Q->genbit; - } + skb = alloc_skb(q->rx_buffer_size, GFP_ATOMIC); + if (!skb) + break; + + skb_reserve(skb, q->dma_offset); + mapping = pci_map_single(pdev, skb->data, dma_len, + PCI_DMA_FROMDEVICE); + ce->skb = skb; + pci_unmap_addr_set(ce, dma_addr, mapping); + pci_unmap_len_set(ce, dma_len, dma_len); + e->addr_lo = (u32)mapping; + e->addr_hi = (u64)mapping >> 32; + e->len_gen = V_CMD_LEN(dma_len) | V_CMD_GEN1(q->genbit); + wmb(); + e->gen2 = V_CMD_GEN2(q->genbit); e++; ce++; - if (++Q->pidx == Q->entries_n) { - Q->pidx = 0; - Q->genbit ^= 1; - ce = Q->centries; - e = Q->entries; + if (++q->pidx == q->size) { + q->pidx = 0; + q->genbit ^= 1; + ce = q->centries; + e = q->entries; } - Q->credits++; + q->credits++; } } /* - * Calls refill_free_list for both freelist Qs. If we cannot - * fill at least 1/4 of both Qs, we go into 'few interrupt mode' in order - * to give the system time to free up resources. + * Calls refill_free_list for both free lists. If we cannot fill at least 1/4 + * of both rings, we go into 'few interrupt mode' in order to give the system + * time to free up resources. */ static void freelQs_empty(struct sge *sge) { - u32 irq_reg = t1_read_reg_4(sge->adapter, A_SG_INT_ENABLE); + struct adapter *adapter = sge->adapter; + u32 irq_reg = readl(adapter->regs + A_SG_INT_ENABLE); u32 irqholdoff_reg; refill_free_list(sge, &sge->freelQ[0]); refill_free_list(sge, &sge->freelQ[1]); - if (sge->freelQ[0].credits > (sge->freelQ[0].entries_n >> 2) && - sge->freelQ[1].credits > (sge->freelQ[1].entries_n >> 2)) { + if (sge->freelQ[0].credits > (sge->freelQ[0].size >> 2) && + sge->freelQ[1].credits > (sge->freelQ[1].size >> 2)) { irq_reg |= F_FL_EXHAUSTED; - irqholdoff_reg = sge->intrtimer[sge->currIndex]; + irqholdoff_reg = sge->fixed_intrtimer; } else { /* Clear the F_FL_EXHAUSTED interrupts for now */ irq_reg &= ~F_FL_EXHAUSTED; irqholdoff_reg = sge->intrtimer_nres; } - t1_write_reg_4(sge->adapter, A_SG_INTRTIMER, irqholdoff_reg); - t1_write_reg_4(sge->adapter, A_SG_INT_ENABLE, irq_reg); + writel(irqholdoff_reg, adapter->regs + A_SG_INTRTIMER); + writel(irq_reg, adapter->regs + A_SG_INT_ENABLE); /* We reenable the Qs to force a freelist GTS interrupt later */ - doorbell_pio(sge, F_FL0_ENABLE | F_FL1_ENABLE); + doorbell_pio(adapter, F_FL0_ENABLE | F_FL1_ENABLE); } #define SGE_PL_INTR_MASK (F_PL_INTR_SGE_ERR | F_PL_INTR_SGE_DATA) @@ -816,10 +670,10 @@ static void freelQs_empty(struct sge *sge) */ void t1_sge_intr_disable(struct sge *sge) { - u32 val = t1_read_reg_4(sge->adapter, A_PL_ENABLE); + u32 val = readl(sge->adapter->regs + A_PL_ENABLE); - t1_write_reg_4(sge->adapter, A_PL_ENABLE, val & ~SGE_PL_INTR_MASK); - t1_write_reg_4(sge->adapter, A_SG_INT_ENABLE, 0); + writel(val & ~SGE_PL_INTR_MASK, sge->adapter->regs + A_PL_ENABLE); + writel(0, sge->adapter->regs + A_SG_INT_ENABLE); } /* @@ -828,12 +682,12 @@ void t1_sge_intr_disable(struct sge *sge) void t1_sge_intr_enable(struct sge *sge) { u32 en = SGE_INT_ENABLE; - u32 val = t1_read_reg_4(sge->adapter, A_PL_ENABLE); + u32 val = readl(sge->adapter->regs + A_PL_ENABLE); if (sge->adapter->flags & TSO_CAPABLE) en &= ~F_PACKET_TOO_BIG; - t1_write_reg_4(sge->adapter, A_SG_INT_ENABLE, en); - t1_write_reg_4(sge->adapter, A_PL_ENABLE, val | SGE_PL_INTR_MASK); + writel(en, sge->adapter->regs + A_SG_INT_ENABLE); + writel(val | SGE_PL_INTR_MASK, sge->adapter->regs + A_PL_ENABLE); } /* @@ -841,8 +695,8 @@ void t1_sge_intr_enable(struct sge *sge) */ void t1_sge_intr_clear(struct sge *sge) { - t1_write_reg_4(sge->adapter, A_PL_CAUSE, SGE_PL_INTR_MASK); - t1_write_reg_4(sge->adapter, A_SG_INT_CAUSE, 0xffffffff); + writel(SGE_PL_INTR_MASK, sge->adapter->regs + A_PL_CAUSE); + writel(0xffffffff, sge->adapter->regs + A_SG_INT_CAUSE); } /* @@ -851,464 +705,673 @@ void t1_sge_intr_clear(struct sge *sge) int t1_sge_intr_error_handler(struct sge *sge) { struct adapter *adapter = sge->adapter; - u32 cause = t1_read_reg_4(adapter, A_SG_INT_CAUSE); + u32 cause = readl(adapter->regs + A_SG_INT_CAUSE); if (adapter->flags & TSO_CAPABLE) cause &= ~F_PACKET_TOO_BIG; if (cause & F_RESPQ_EXHAUSTED) - sge->intr_cnt.respQ_empty++; + sge->stats.respQ_empty++; if (cause & F_RESPQ_OVERFLOW) { - sge->intr_cnt.respQ_overflow++; + sge->stats.respQ_overflow++; CH_ALERT("%s: SGE response queue overflow\n", adapter->name); } if (cause & F_FL_EXHAUSTED) { - sge->intr_cnt.freelistQ_empty++; + sge->stats.freelistQ_empty++; freelQs_empty(sge); } if (cause & F_PACKET_TOO_BIG) { - sge->intr_cnt.pkt_too_big++; + sge->stats.pkt_too_big++; CH_ALERT("%s: SGE max packet size exceeded\n", adapter->name); } if (cause & F_PACKET_MISMATCH) { - sge->intr_cnt.pkt_mismatch++; + sge->stats.pkt_mismatch++; CH_ALERT("%s: SGE packet mismatch\n", adapter->name); } if (cause & SGE_INT_FATAL) t1_fatal_err(adapter); - t1_write_reg_4(adapter, A_SG_INT_CAUSE, cause); + writel(cause, adapter->regs + A_SG_INT_CAUSE); return 0; } -/* - * The following code is copied from 2.6, where the skb_pull is doing the - * right thing and only pulls ETH_HLEN. +const struct sge_intr_counts *t1_sge_get_intr_counts(struct sge *sge) +{ + return &sge->stats; +} + +const struct sge_port_stats *t1_sge_get_port_stats(struct sge *sge, int port) +{ + return &sge->port_stats[port]; +} + +/** + * recycle_fl_buf - recycle a free list buffer + * @fl: the free list + * @idx: index of buffer to recycle * - * Determine the packet's protocol ID. The rule here is that we - * assume 802.3 if the type field is short enough to be a length. - * This is normal practice and works for any 'now in use' protocol. + * Recycles the specified buffer on the given free list by adding it at + * the next available slot on the list. */ -static unsigned short sge_eth_type_trans(struct sk_buff *skb, - struct net_device *dev) +static void recycle_fl_buf(struct freelQ *fl, int idx) { - struct ethhdr *eth; - unsigned char *rawp; + struct freelQ_e *from = &fl->entries[idx]; + struct freelQ_e *to = &fl->entries[fl->pidx]; - skb->mac.raw = skb->data; - skb_pull(skb, ETH_HLEN); - eth = (struct ethhdr *)skb->mac.raw; + fl->centries[fl->pidx] = fl->centries[idx]; + to->addr_lo = from->addr_lo; + to->addr_hi = from->addr_hi; + to->len_gen = G_CMD_LEN(from->len_gen) | V_CMD_GEN1(fl->genbit); + wmb(); + to->gen2 = V_CMD_GEN2(fl->genbit); + fl->credits++; - if (*eth->h_dest&1) { - if(memcmp(eth->h_dest, dev->broadcast, ETH_ALEN) == 0) - skb->pkt_type = PACKET_BROADCAST; - else - skb->pkt_type = PACKET_MULTICAST; + if (++fl->pidx == fl->size) { + fl->pidx = 0; + fl->genbit ^= 1; } +} - /* - * This ALLMULTI check should be redundant by 1.4 - * so don't forget to remove it. - * - * Seems, you forgot to remove it. All silly devices - * seems to set IFF_PROMISC. - */ +/** + * get_packet - return the next ingress packet buffer + * @pdev: the PCI device that received the packet + * @fl: the SGE free list holding the packet + * @len: the actual packet length, excluding any SGE padding + * @dma_pad: padding at beginning of buffer left by SGE DMA + * @skb_pad: padding to be used if the packet is copied + * @copy_thres: length threshold under which a packet should be copied + * @drop_thres: # of remaining buffers before we start dropping packets + * + * Get the next packet from a free list and complete setup of the + * sk_buff. If the packet is small we make a copy and recycle the + * original buffer, otherwise we use the original buffer itself. If a + * positive drop threshold is supplied packets are dropped and their + * buffers recycled if (a) the number of remaining buffers is under the + * threshold and the packet is too big to copy, or (b) the packet should + * be copied but there is no memory for the copy. + */ +static inline struct sk_buff *get_packet(struct pci_dev *pdev, + struct freelQ *fl, unsigned int len, + int dma_pad, int skb_pad, + unsigned int copy_thres, + unsigned int drop_thres) +{ + struct sk_buff *skb; + struct freelQ_ce *ce = &fl->centries[fl->cidx]; + + if (len < copy_thres) { + skb = alloc_skb(len + skb_pad, GFP_ATOMIC); + if (likely(skb != NULL)) { + skb_reserve(skb, skb_pad); + skb_put(skb, len); + pci_dma_sync_single_for_cpu(pdev, + pci_unmap_addr(ce, dma_addr), + pci_unmap_len(ce, dma_len), + PCI_DMA_FROMDEVICE); + memcpy(skb->data, ce->skb->data + dma_pad, len); + pci_dma_sync_single_for_device(pdev, + pci_unmap_addr(ce, dma_addr), + pci_unmap_len(ce, dma_len), + PCI_DMA_FROMDEVICE); + } else if (!drop_thres) + goto use_orig_buf; - else if (1 /*dev->flags&IFF_PROMISC*/) - { - if(memcmp(eth->h_dest,dev->dev_addr, ETH_ALEN)) - skb->pkt_type=PACKET_OTHERHOST; + recycle_fl_buf(fl, fl->cidx); + return skb; } - if (ntohs(eth->h_proto) >= 1536) - return eth->h_proto; - - rawp = skb->data; + if (fl->credits < drop_thres) { + recycle_fl_buf(fl, fl->cidx); + return NULL; + } - /* - * This is a magic hack to spot IPX packets. Older Novell breaks - * the protocol design and runs IPX over 802.3 without an 802.2 LLC - * layer. We look for FFFF which isn't a used 802.2 SSAP/DSAP. This - * won't work for fault tolerant netware but does for the rest. - */ - if (*(unsigned short *)rawp == 0xFFFF) - return htons(ETH_P_802_3); +use_orig_buf: + pci_unmap_single(pdev, pci_unmap_addr(ce, dma_addr), + pci_unmap_len(ce, dma_len), PCI_DMA_FROMDEVICE); + skb = ce->skb; + skb_reserve(skb, dma_pad); + skb_put(skb, len); + return skb; +} - /* - * Real 802.2 LLC - */ - return htons(ETH_P_802_2); +/** + * unexpected_offload - handle an unexpected offload packet + * @adapter: the adapter + * @fl: the free list that received the packet + * + * Called when we receive an unexpected offload packet (e.g., the TOE + * function is disabled or the card is a NIC). Prints a message and + * recycles the buffer. + */ +static void unexpected_offload(struct adapter *adapter, struct freelQ *fl) +{ + struct freelQ_ce *ce = &fl->centries[fl->cidx]; + struct sk_buff *skb = ce->skb; + + pci_dma_sync_single_for_cpu(adapter->pdev, pci_unmap_addr(ce, dma_addr), + pci_unmap_len(ce, dma_len), PCI_DMA_FROMDEVICE); + CH_ERR("%s: unexpected offload packet, cmd %u\n", + adapter->name, *skb->data); + recycle_fl_buf(fl, fl->cidx); } /* - * Prepare the received buffer and pass it up the stack. If it is small enough - * and allocation doesn't fail, we use a new sk_buff and copy the content. + * Write the command descriptors to transmit the given skb starting at + * descriptor pidx with the given generation. */ -static unsigned int t1_sge_rx(struct sge *sge, struct freelQ *Q, - unsigned int len, unsigned int offload) +static inline void write_tx_descs(struct adapter *adapter, struct sk_buff *skb, + unsigned int pidx, unsigned int gen, + struct cmdQ *q) { - struct sk_buff *skb; - struct adapter *adapter = sge->adapter; - struct freelQ_ce *ce = &Q->centries[Q->cidx]; + dma_addr_t mapping; + struct cmdQ_e *e, *e1; + struct cmdQ_ce *ce; + unsigned int i, flags, nfrags = skb_shinfo(skb)->nr_frags; + + mapping = pci_map_single(adapter->pdev, skb->data, + skb->len - skb->data_len, PCI_DMA_TODEVICE); + ce = &q->centries[pidx]; + ce->skb = NULL; + pci_unmap_addr_set(ce, dma_addr, mapping); + pci_unmap_len_set(ce, dma_len, skb->len - skb->data_len); - if (len <= SGE_RX_COPY_THRESHOLD && - (skb = alloc_skb(len + NET_IP_ALIGN, GFP_ATOMIC))) { - struct freelQ_e *e; - char *src = ce->skb->data; + flags = F_CMD_DATAVALID | F_CMD_SOP | V_CMD_EOP(nfrags == 0) | + V_CMD_GEN2(gen); + e = &q->entries[pidx]; + e->addr_lo = (u32)mapping; + e->addr_hi = (u64)mapping >> 32; + e->len_gen = V_CMD_LEN(skb->len - skb->data_len) | V_CMD_GEN1(gen); + for (e1 = e, i = 0; nfrags--; i++) { + skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; - pci_dma_sync_single_for_cpu(adapter->pdev, - pci_unmap_addr(ce, dma_addr), - pci_unmap_len(ce, dma_len), - PCI_DMA_FROMDEVICE); - if (!offload) { - skb_reserve(skb, NET_IP_ALIGN); - src += sge->rx_pkt_pad; + ce++; + e1++; + if (++pidx == q->size) { + pidx = 0; + gen ^= 1; + ce = q->centries; + e1 = q->entries; } - memcpy(skb->data, src, len); - /* Reuse the entry. */ - e = &Q->entries[Q->cidx]; - e->GenerationBit ^= 1; - e->GenerationBit2 ^= 1; - } else { - pci_unmap_single(adapter->pdev, pci_unmap_addr(ce, dma_addr), - pci_unmap_len(ce, dma_len), - PCI_DMA_FROMDEVICE); - skb = ce->skb; - if (!offload && sge->rx_pkt_pad) - __skb_pull(skb, sge->rx_pkt_pad); + mapping = pci_map_page(adapter->pdev, frag->page, + frag->page_offset, frag->size, + PCI_DMA_TODEVICE); + ce->skb = NULL; + pci_unmap_addr_set(ce, dma_addr, mapping); + pci_unmap_len_set(ce, dma_len, frag->size); + + e1->addr_lo = (u32)mapping; + e1->addr_hi = (u64)mapping >> 32; + e1->len_gen = V_CMD_LEN(frag->size) | V_CMD_GEN1(gen); + e1->flags = F_CMD_DATAVALID | V_CMD_EOP(nfrags == 0) | + V_CMD_GEN2(gen); } - skb_put(skb, len); + ce->skb = skb; + wmb(); + e->flags = flags; +} +/* + * Clean up completed Tx buffers. + */ +static inline void reclaim_completed_tx(struct sge *sge, struct cmdQ *q) +{ + unsigned int reclaim = q->processed - q->cleaned; - if (unlikely(offload)) { - { - printk(KERN_ERR - "%s: unexpected offloaded packet, cmd %u\n", - adapter->name, *skb->data); - dev_kfree_skb_any(skb); - } - } else { - struct cpl_rx_pkt *p = (struct cpl_rx_pkt *)skb->data; - - skb_pull(skb, sizeof(*p)); - skb->dev = adapter->port[p->iff].dev; - skb->dev->last_rx = jiffies; - skb->protocol = sge_eth_type_trans(skb, skb->dev); - if ((adapter->flags & RX_CSUM_ENABLED) && p->csum == 0xffff && - skb->protocol == htons(ETH_P_IP) && - (skb->data[9] == IPPROTO_TCP || - skb->data[9] == IPPROTO_UDP)) - skb->ip_summed = CHECKSUM_UNNECESSARY; - else - skb->ip_summed = CHECKSUM_NONE; - if (adapter->vlan_grp && p->vlan_valid) - vlan_hwaccel_rx(skb, adapter->vlan_grp, - ntohs(p->vlan)); - else - netif_rx(skb); + if (reclaim) { + free_cmdQ_buffers(sge, q, reclaim); + q->cleaned += reclaim; } +} - if (++Q->cidx == Q->entries_n) - Q->cidx = 0; +#ifndef SET_ETHTOOL_OPS +# define __netif_rx_complete(dev) netif_rx_complete(dev) +#endif - if (unlikely(--Q->credits < Q->entries_n - SGE_FREEL_REFILL_THRESH)) - refill_free_list(sge, Q); - return 1; +/* + * We cannot use the standard netif_rx_schedule_prep() because we have multiple + * ports plus the TOE all multiplexing onto a single response queue, therefore + * accepting new responses cannot depend on the state of any particular port. + * So define our own equivalent that omits the netif_running() test. + */ +static inline int napi_schedule_prep(struct net_device *dev) +{ + return !test_and_set_bit(__LINK_STATE_RX_SCHED, &dev->state); } -/* - * Adaptive interrupt timer logic to keep the CPU utilization to - * manageable levels. Basically, as the Average Packet Size (APS) - * gets higher, the interrupt latency setting gets longer. Every - * SGE_INTR_BUCKETSIZE (of 100B) causes a bump of 2usec to the - * base value of SGE_INTRTIMER0. At large values of payload the - * latency hits the ceiling value of SGE_INTRTIMER1 stored at - * index SGE_INTR_MAXBUCKETS-1 in sge->intrtimer[]. +/** + * sge_rx - process an ingress ethernet packet + * @sge: the sge structure + * @fl: the free list that contains the packet buffer + * @len: the packet length * - * sge->currIndex caches the last index to save unneeded PIOs. + * Process an ingress ethernet pakcet and deliver it to the stack. */ -static inline void update_intr_timer(struct sge *sge, unsigned int avg_payload) +static int sge_rx(struct sge *sge, struct freelQ *fl, unsigned int len) { - unsigned int newIndex; + struct sk_buff *skb; + struct cpl_rx_pkt *p; + struct adapter *adapter = sge->adapter; - newIndex = avg_payload / SGE_INTR_BUCKETSIZE; - if (newIndex > SGE_INTR_MAXBUCKETS - 1) { - newIndex = SGE_INTR_MAXBUCKETS - 1; - } - /* Save a PIO with this check....maybe */ - if (newIndex != sge->currIndex) { - t1_write_reg_4(sge->adapter, A_SG_INTRTIMER, - sge->intrtimer[newIndex]); - sge->currIndex = newIndex; - sge->adapter->params.sge.last_rx_coalesce_raw = - sge->intrtimer[newIndex]; + sge->stats.ethernet_pkts++; + skb = get_packet(adapter->pdev, fl, len - sge->rx_pkt_pad, + sge->rx_pkt_pad, 2, SGE_RX_COPY_THRES, + SGE_RX_DROP_THRES); + if (!skb) { + sge->port_stats[0].rx_drops++; /* charge only port 0 for now */ + return 0; } + + p = (struct cpl_rx_pkt *)skb->data; + skb_pull(skb, sizeof(*p)); + skb->dev = adapter->port[p->iff].dev; + skb->dev->last_rx = jiffies; + skb->protocol = eth_type_trans(skb, skb->dev); + if ((adapter->flags & RX_CSUM_ENABLED) && p->csum == 0xffff && + skb->protocol == htons(ETH_P_IP) && + (skb->data[9] == IPPROTO_TCP || skb->data[9] == IPPROTO_UDP)) { + sge->port_stats[p->iff].rx_cso_good++; + skb->ip_summed = CHECKSUM_UNNECESSARY; + } else + skb->ip_summed = CHECKSUM_NONE; + + if (unlikely(adapter->vlan_grp && p->vlan_valid)) { + sge->port_stats[p->iff].vlan_xtract++; + if (adapter->params.sge.polling) + vlan_hwaccel_receive_skb(skb, adapter->vlan_grp, + ntohs(p->vlan)); + else + vlan_hwaccel_rx(skb, adapter->vlan_grp, + ntohs(p->vlan)); + } else if (adapter->params.sge.polling) + netif_receive_skb(skb); + else + netif_rx(skb); + return 0; } /* - * Returns true if command queue q_num has enough available descriptors that + * Returns true if a command queue has enough available descriptors that * we can resume Tx operation after temporarily disabling its packet queue. */ -static inline int enough_free_Tx_descs(struct sge *sge, int q_num) +static inline int enough_free_Tx_descs(const struct cmdQ *q) { - return atomic_read(&sge->cmdQ[q_num].credits) > - (sge->cmdQ[q_num].entries_n >> 2); + unsigned int r = q->processed - q->cleaned; + + return q->in_use - r < (q->size >> 1); } /* - * Main interrupt handler, optimized assuming that we took a 'DATA' - * interrupt. - * - * 1. Clear the interrupt - * 2. Loop while we find valid descriptors and process them; accumulate - * information that can be processed after the loop - * 3. Tell the SGE at which index we stopped processing descriptors - * 4. Bookkeeping; free TX buffers, ring doorbell if there are any - * outstanding TX buffers waiting, replenish RX buffers, potentially - * reenable upper layers if they were turned off due to lack of TX - * resources which are available again. - * 5. If we took an interrupt, but no valid respQ descriptors was found we - * let the slow_intr_handler run and do error handling. + * Called when sufficient space has become available in the SGE command queues + * after the Tx packet schedulers have been suspended to restart the Tx path. */ -irqreturn_t t1_interrupt(int irq, void *cookie, struct pt_regs *regs) +static void restart_tx_queues(struct sge *sge) { - struct net_device *netdev; - struct adapter *adapter = cookie; - struct sge *sge = adapter->sge; - struct respQ *Q = &sge->respQ; - unsigned int credits = Q->credits, flags = 0, ret = 0; - unsigned int tot_rxpayload = 0, tot_txpayload = 0, n_rx = 0, n_tx = 0; - unsigned int credits_pend[SGE_CMDQ_N] = { 0, 0 }; + struct adapter *adap = sge->adapter; - struct respQ_e *e = &Q->entries[Q->cidx]; - prefetch(e); + if (enough_free_Tx_descs(&sge->cmdQ[0])) { + int i; + + for_each_port(adap, i) { + struct net_device *nd = adap->port[i].dev; + + if (test_and_clear_bit(nd->if_port, + &sge->stopped_tx_queues) && + netif_running(nd)) { + sge->stats.cmdQ_restarted[3]++; + netif_wake_queue(nd); + } + } + } +} + +/* + * update_tx_info is called from the interrupt handler/NAPI to return cmdQ0 + * information. + */ +static unsigned int update_tx_info(struct adapter *adapter, + unsigned int flags, + unsigned int pr0) +{ + struct sge *sge = adapter->sge; + struct cmdQ *cmdq = &sge->cmdQ[0]; - t1_write_reg_4(adapter, A_PL_CAUSE, F_PL_INTR_SGE_DATA); + cmdq->processed += pr0; + if (flags & F_CMDQ0_ENABLE) { + clear_bit(CMDQ_STAT_RUNNING, &cmdq->status); + + if (cmdq->cleaned + cmdq->in_use != cmdq->processed && + !test_and_set_bit(CMDQ_STAT_LAST_PKT_DB, &cmdq->status)) { + set_bit(CMDQ_STAT_RUNNING, &cmdq->status); + writel(F_CMDQ0_ENABLE, adapter->regs + A_SG_DOORBELL); + } + flags &= ~F_CMDQ0_ENABLE; + } + + if (unlikely(sge->stopped_tx_queues != 0)) + restart_tx_queues(sge); - while (e->GenerationBit == Q->genbit) { - if (--credits < SGE_RESPQ_REPLENISH_THRES) { - u32 n = Q->entries_n - credits - 1; + return flags; +} - t1_write_reg_4(adapter, A_SG_RSPQUEUECREDIT, n); - credits += n; +/* + * Process SGE responses, up to the supplied budget. Returns the number of + * responses processed. A negative budget is effectively unlimited. + */ +static int process_responses(struct adapter *adapter, int budget) +{ + struct sge *sge = adapter->sge; + struct respQ *q = &sge->respQ; + struct respQ_e *e = &q->entries[q->cidx]; + int budget_left = budget; + unsigned int flags = 0; + unsigned int cmdq_processed[SGE_CMDQ_N] = {0, 0}; + + + while (likely(budget_left && e->GenerationBit == q->genbit)) { + flags |= e->Qsleeping; + + cmdq_processed[0] += e->Cmdq0CreditReturn; + cmdq_processed[1] += e->Cmdq1CreditReturn; + + /* We batch updates to the TX side to avoid cacheline + * ping-pong of TX state information on MP where the sender + * might run on a different CPU than this function... + */ + if (unlikely(flags & F_CMDQ0_ENABLE || cmdq_processed[0] > 64)) { + flags = update_tx_info(adapter, flags, cmdq_processed[0]); + cmdq_processed[0] = 0; + } + if (unlikely(cmdq_processed[1] > 16)) { + sge->cmdQ[1].processed += cmdq_processed[1]; + cmdq_processed[1] = 0; } if (likely(e->DataValid)) { - if (!e->Sop || !e->Eop) + struct freelQ *fl = &sge->freelQ[e->FreelistQid]; + + if (unlikely(!e->Sop || !e->Eop)) BUG(); - t1_sge_rx(sge, &sge->freelQ[e->FreelistQid], - e->BufferLength, e->Offload); - tot_rxpayload += e->BufferLength; - ++n_rx; - } - flags |= e->Qsleeping; - credits_pend[0] += e->Cmdq0CreditReturn; - credits_pend[1] += e->Cmdq1CreditReturn; + if (unlikely(e->Offload)) + unexpected_offload(adapter, fl); + else + sge_rx(sge, fl, e->BufferLength); + + /* + * Note: this depends on each packet consuming a + * single free-list buffer; cf. the BUG above. + */ + if (++fl->cidx == fl->size) + fl->cidx = 0; + if (unlikely(--fl->credits < + fl->size - SGE_FREEL_REFILL_THRESH)) + refill_free_list(sge, fl); + } else + sge->stats.pure_rsps++; -#ifdef CONFIG_SMP - /* - * If enough cmdQ0 buffers have finished DMAing free them so - * anyone that may be waiting for their release can continue. - * We do this only on MP systems to allow other CPUs to proceed - * promptly. UP systems can wait for the free_cmdQ_buffers() - * calls after this loop as the sole CPU is currently busy in - * this loop. - */ - if (unlikely(credits_pend[0] > SGE_FREEL_REFILL_THRESH)) { - free_cmdQ_buffers(sge, &sge->cmdQ[0], credits_pend[0], - &tot_txpayload); - n_tx += credits_pend[0]; - credits_pend[0] = 0; - } -#endif - ret++; e++; - if (unlikely(++Q->cidx == Q->entries_n)) { - Q->cidx = 0; - Q->genbit ^= 1; - e = Q->entries; + if (unlikely(++q->cidx == q->size)) { + q->cidx = 0; + q->genbit ^= 1; + e = q->entries; + } + prefetch(e); + + if (++q->credits > SGE_RESPQ_REPLENISH_THRES) { + writel(q->credits, adapter->regs + A_SG_RSPQUEUECREDIT); + q->credits = 0; } + --budget_left; } - Q->credits = credits; - t1_write_reg_4(adapter, A_SG_SLEEPING, Q->cidx); + flags = update_tx_info(adapter, flags, cmdq_processed[0]); + sge->cmdQ[1].processed += cmdq_processed[1]; - if (credits_pend[0]) - free_cmdQ_buffers(sge, &sge->cmdQ[0], credits_pend[0], &tot_txpayload); - if (credits_pend[1]) - free_cmdQ_buffers(sge, &sge->cmdQ[1], credits_pend[1], &tot_txpayload); + budget -= budget_left; + return budget; +} - /* Do any coalescing and interrupt latency timer adjustments */ - if (adapter->params.sge.coalesce_enable) { - unsigned int avg_txpayload = 0, avg_rxpayload = 0; +/* + * A simpler version of process_responses() that handles only pure (i.e., + * non data-carrying) responses. Such respones are too light-weight to justify + * calling a softirq when using NAPI, so we handle them specially in hard + * interrupt context. The function is called with a pointer to a response, + * which the caller must ensure is a valid pure response. Returns 1 if it + * encounters a valid data-carrying response, 0 otherwise. + */ +static int process_pure_responses(struct adapter *adapter, struct respQ_e *e) +{ + struct sge *sge = adapter->sge; + struct respQ *q = &sge->respQ; + unsigned int flags = 0; + unsigned int cmdq_processed[SGE_CMDQ_N] = {0, 0}; - n_tx += credits_pend[0] + credits_pend[1]; + do { + flags |= e->Qsleeping; - /* - * Choose larger avg. payload size to increase - * throughput and reduce [CPU util., intr/s.] - * - * Throughput behavior favored in mixed-mode. - */ - if (n_tx) - avg_txpayload = tot_txpayload/n_tx; - if (n_rx) - avg_rxpayload = tot_rxpayload/n_rx; - - if (n_tx && avg_txpayload > avg_rxpayload){ - update_intr_timer(sge, avg_txpayload); - } else if (n_rx) { - update_intr_timer(sge, avg_rxpayload); + cmdq_processed[0] += e->Cmdq0CreditReturn; + cmdq_processed[1] += e->Cmdq1CreditReturn; + + e++; + if (unlikely(++q->cidx == q->size)) { + q->cidx = 0; + q->genbit ^= 1; + e = q->entries; } - } - - if (flags & F_CMDQ0_ENABLE) { - struct cmdQ *cmdQ = &sge->cmdQ[0]; + prefetch(e); - atomic_set(&cmdQ->asleep, 1); - if (atomic_read(&cmdQ->pio_pidx) != cmdQ->pidx) { - doorbell_pio(sge, F_CMDQ0_ENABLE); - atomic_set(&cmdQ->pio_pidx, cmdQ->pidx); + if (++q->credits > SGE_RESPQ_REPLENISH_THRES) { + writel(q->credits, adapter->regs + A_SG_RSPQUEUECREDIT); + q->credits = 0; } - } - if (unlikely(flags & (F_FL0_ENABLE | F_FL1_ENABLE))) - freelQs_empty(sge); + sge->stats.pure_rsps++; + } while (e->GenerationBit == q->genbit && !e->DataValid); - netdev = adapter->port[0].dev; - if (unlikely(netif_queue_stopped(netdev) && netif_carrier_ok(netdev) && - enough_free_Tx_descs(sge, 0) && - enough_free_Tx_descs(sge, 1))) { - netif_wake_queue(netdev); - } - if (unlikely(!ret)) - ret = t1_slow_intr_handler(adapter); + flags = update_tx_info(adapter, flags, cmdq_processed[0]); + sge->cmdQ[1].processed += cmdq_processed[1]; - return IRQ_RETVAL(ret != 0); + return e->GenerationBit == q->genbit; } /* - * Enqueues the sk_buff onto the cmdQ[qid] and has hardware fetch it. - * - * The code figures out how many entries the sk_buff will require in the - * cmdQ and updates the cmdQ data structure with the state once the enqueue - * has complete. Then, it doesn't access the global structure anymore, but - * uses the corresponding fields on the stack. In conjuction with a spinlock - * around that code, we can make the function reentrant without holding the - * lock when we actually enqueue (which might be expensive, especially on - * architectures with IO MMUs). + * Handler for new data events when using NAPI. This does not need any locking + * or protection from interrupts as data interrupts are off at this point and + * other adapter interrupts do not interfere. */ -static unsigned int t1_sge_tx(struct sk_buff *skb, struct adapter *adapter, - unsigned int qid) +static int t1_poll(struct net_device *dev, int *budget) { - struct sge *sge = adapter->sge; - struct cmdQ *Q = &sge->cmdQ[qid]; - struct cmdQ_e *e; - struct cmdQ_ce *ce; - dma_addr_t mapping; - unsigned int credits, pidx, genbit; + struct adapter *adapter = dev->priv; + int effective_budget = min(*budget, dev->quota); + + int work_done = process_responses(adapter, effective_budget); + *budget -= work_done; + dev->quota -= work_done; - unsigned int count = 1 + skb_shinfo(skb)->nr_frags; + if (work_done >= effective_budget) + return 1; + + __netif_rx_complete(dev); /* - * Coming from the timer + * Because we don't atomically flush the following write it is + * possible that in very rare cases it can reach the device in a way + * that races with a new response being written plus an error interrupt + * causing the NAPI interrupt handler below to return unhandled status + * to the OS. To protect against this would require flushing the write + * and doing both the write and the flush with interrupts off. Way too + * expensive and unjustifiable given the rarity of the race. */ - if ((skb == sge->pskb)) { - /* - * Quit if any cmdQ activities - */ - if (!spin_trylock(&Q->Qlock)) - return 0; - if (atomic_read(&Q->credits) != Q->entries_n) { - spin_unlock(&Q->Qlock); - return 0; - } - } - else - spin_lock(&Q->Qlock); - - genbit = Q->genbit; - pidx = Q->pidx; - credits = atomic_read(&Q->credits); - - credits -= count; - atomic_sub(count, &Q->credits); - Q->pidx += count; - if (Q->pidx >= Q->entries_n) { - Q->pidx -= Q->entries_n; - Q->genbit ^= 1; - } + writel(adapter->sge->respQ.cidx, adapter->regs + A_SG_SLEEPING); + return 0; +} - if (unlikely(credits < (MAX_SKB_FRAGS + 1))) { - sge->intr_cnt.cmdQ_full[qid]++; - netif_stop_queue(adapter->port[0].dev); - } - spin_unlock(&Q->Qlock); +/* + * Returns true if the device is already scheduled for polling. + */ +static inline int napi_is_scheduled(struct net_device *dev) +{ + return test_bit(__LINK_STATE_RX_SCHED, &dev->state); +} - mapping = pci_map_single(adapter->pdev, skb->data, - skb->len - skb->data_len, PCI_DMA_TODEVICE); - ce = &Q->centries[pidx]; - ce->skb = NULL; - pci_unmap_addr_set(ce, dma_addr, mapping); - pci_unmap_len_set(ce, dma_len, skb->len - skb->data_len); - ce->single = 1; +/* + * NAPI version of the main interrupt handler. + */ +static irqreturn_t t1_interrupt_napi(int irq, void *data, struct pt_regs *regs) +{ + int handled; + struct adapter *adapter = data; + struct sge *sge = adapter->sge; + struct respQ *q = &adapter->sge->respQ; - e = &Q->entries[pidx]; - e->Sop = 1; - e->DataValid = 1; - e->BufferLength = skb->len - skb->data_len; - e->AddrHigh = (u64)mapping >> 32; - e->AddrLow = (u32)mapping; + /* + * Clear the SGE_DATA interrupt first thing. Normally the NAPI + * handler has control of the response queue and the interrupt handler + * can look at the queue reliably only once it knows NAPI is off. + * We can't wait that long to clear the SGE_DATA interrupt because we + * could race with t1_poll rearming the SGE interrupt, so we need to + * clear the interrupt speculatively and really early on. + */ + writel(F_PL_INTR_SGE_DATA, adapter->regs + A_PL_CAUSE); + + spin_lock(&adapter->async_lock); + if (!napi_is_scheduled(sge->netdev)) { + struct respQ_e *e = &q->entries[q->cidx]; + + if (e->GenerationBit == q->genbit) { + if (e->DataValid || + process_pure_responses(adapter, e)) { + if (likely(napi_schedule_prep(sge->netdev))) + __netif_rx_schedule(sge->netdev); + else + printk(KERN_CRIT + "NAPI schedule failure!\n"); + } else + writel(q->cidx, adapter->regs + A_SG_SLEEPING); + handled = 1; + goto unlock; + } else + writel(q->cidx, adapter->regs + A_SG_SLEEPING); + } else + if (readl(adapter->regs + A_PL_CAUSE) & F_PL_INTR_SGE_DATA) + printk(KERN_ERR "data interrupt while NAPI running\n"); + + handled = t1_slow_intr_handler(adapter); + if (!handled) + sge->stats.unhandled_irqs++; + unlock: + spin_unlock(&adapter->async_lock); + return IRQ_RETVAL(handled != 0); +} - if (--count > 0) { - unsigned int i; +/* + * Main interrupt handler, optimized assuming that we took a 'DATA' + * interrupt. + * + * 1. Clear the interrupt + * 2. Loop while we find valid descriptors and process them; accumulate + * information that can be processed after the loop + * 3. Tell the SGE at which index we stopped processing descriptors + * 4. Bookkeeping; free TX buffers, ring doorbell if there are any + * outstanding TX buffers waiting, replenish RX buffers, potentially + * reenable upper layers if they were turned off due to lack of TX + * resources which are available again. + * 5. If we took an interrupt, but no valid respQ descriptors was found we + * let the slow_intr_handler run and do error handling. + */ +static irqreturn_t t1_interrupt(int irq, void *cookie, struct pt_regs *regs) +{ + int work_done; + struct respQ_e *e; + struct adapter *adapter = cookie; + struct respQ *Q = &adapter->sge->respQ; - e->Eop = 0; - wmb(); - e->GenerationBit = e->GenerationBit2 = genbit; + spin_lock(&adapter->async_lock); + e = &Q->entries[Q->cidx]; + prefetch(e); - for (i = 0; i < count; i++) { - skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; + writel(F_PL_INTR_SGE_DATA, adapter->regs + A_PL_CAUSE); - ce++; e++; - if (++pidx == Q->entries_n) { - pidx = 0; - genbit ^= 1; - ce = Q->centries; - e = Q->entries; - } + if (likely(e->GenerationBit == Q->genbit)) + work_done = process_responses(adapter, -1); + else + work_done = t1_slow_intr_handler(adapter); - mapping = pci_map_page(adapter->pdev, frag->page, - frag->page_offset, - frag->size, - PCI_DMA_TODEVICE); - ce->skb = NULL; - pci_unmap_addr_set(ce, dma_addr, mapping); - pci_unmap_len_set(ce, dma_len, frag->size); - ce->single = 0; - - e->Sop = 0; - e->DataValid = 1; - e->BufferLength = frag->size; - e->AddrHigh = (u64)mapping >> 32; - e->AddrLow = (u32)mapping; - - if (i < count - 1) { - e->Eop = 0; - wmb(); - e->GenerationBit = e->GenerationBit2 = genbit; - } + /* + * The unconditional clearing of the PL_CAUSE above may have raced + * with DMA completion and the corresponding generation of a response + * to cause us to miss the resulting data interrupt. The next write + * is also unconditional to recover the missed interrupt and render + * this race harmless. + */ + writel(Q->cidx, adapter->regs + A_SG_SLEEPING); + + if (!work_done) + adapter->sge->stats.unhandled_irqs++; + spin_unlock(&adapter->async_lock); + return IRQ_RETVAL(work_done != 0); +} + +intr_handler_t t1_select_intr_handler(adapter_t *adapter) +{ + return adapter->params.sge.polling ? t1_interrupt_napi : t1_interrupt; +} + +/* + * Enqueues the sk_buff onto the cmdQ[qid] and has hardware fetch it. + * + * The code figures out how many entries the sk_buff will require in the + * cmdQ and updates the cmdQ data structure with the state once the enqueue + * has complete. Then, it doesn't access the global structure anymore, but + * uses the corresponding fields on the stack. In conjuction with a spinlock + * around that code, we can make the function reentrant without holding the + * lock when we actually enqueue (which might be expensive, especially on + * architectures with IO MMUs). + * + * This runs with softirqs disabled. + */ +unsigned int t1_sge_tx(struct sk_buff *skb, struct adapter *adapter, + unsigned int qid, struct net_device *dev) +{ + struct sge *sge = adapter->sge; + struct cmdQ *q = &sge->cmdQ[qid]; + unsigned int credits, pidx, genbit, count; + + spin_lock(&q->lock); + reclaim_completed_tx(sge, q); + + pidx = q->pidx; + credits = q->size - q->in_use; + count = 1 + skb_shinfo(skb)->nr_frags; + + { /* Ethernet packet */ + if (unlikely(credits < count)) { + netif_stop_queue(dev); + set_bit(dev->if_port, &sge->stopped_tx_queues); + sge->stats.cmdQ_full[3]++; + spin_unlock(&q->lock); + CH_ERR("%s: Tx ring full while queue awake!\n", + adapter->name); + return 1; } + if (unlikely(credits - count < q->stop_thres)) { + sge->stats.cmdQ_full[3]++; + netif_stop_queue(dev); + set_bit(dev->if_port, &sge->stopped_tx_queues); + } + } + q->in_use += count; + genbit = q->genbit; + q->pidx += count; + if (q->pidx >= q->size) { + q->pidx -= q->size; + q->genbit ^= 1; } + spin_unlock(&q->lock); - if (skb != sge->pskb) - ce->skb = skb; - e->Eop = 1; - wmb(); - e->GenerationBit = e->GenerationBit2 = genbit; + write_tx_descs(adapter, skb, pidx, genbit, q); /* * We always ring the doorbell for cmdQ1. For cmdQ0, we only ring @@ -1317,50 +1380,50 @@ static unsigned int t1_sge_tx(struct sk_buff *skb, struct adapter *adapter, * then the interrupt handler will detect the outstanding TX packet * and ring the doorbell for us. */ - if (qid) { - doorbell_pio(sge, F_CMDQ1_ENABLE); - } else if (atomic_read(&Q->asleep)) { - atomic_set(&Q->asleep, 0); - doorbell_pio(sge, F_CMDQ0_ENABLE); - atomic_set(&Q->pio_pidx, Q->pidx); + if (qid) + doorbell_pio(adapter, F_CMDQ1_ENABLE); + else { + clear_bit(CMDQ_STAT_LAST_PKT_DB, &q->status); + if (test_and_set_bit(CMDQ_STAT_RUNNING, &q->status) == 0) { + set_bit(CMDQ_STAT_LAST_PKT_DB, &q->status); + writel(F_CMDQ0_ENABLE, adapter->regs + A_SG_DOORBELL); + } } return 0; } #define MK_ETH_TYPE_MSS(type, mss) (((mss) & 0x3FFF) | ((type) << 14)) +/* + * eth_hdr_len - return the length of an Ethernet header + * @data: pointer to the start of the Ethernet header + * + * Returns the length of an Ethernet header, including optional VLAN tag. + */ +static inline int eth_hdr_len(const void *data) +{ + const struct ethhdr *e = data; + + return e->h_proto == htons(ETH_P_8021Q) ? VLAN_ETH_HLEN : ETH_HLEN; +} + /* * Adds the CPL header to the sk_buff and passes it to t1_sge_tx. */ int t1_start_xmit(struct sk_buff *skb, struct net_device *dev) { struct adapter *adapter = dev->priv; + struct sge_port_stats *st = &adapter->sge->port_stats[dev->if_port]; + struct sge *sge = adapter->sge; struct cpl_tx_pkt *cpl; - struct ethhdr *eth; - size_t max_len; - - /* - * We are using a non-standard hard_header_len and some kernel - * components, such as pktgen, do not handle it right. Complain - * when this happens but try to fix things up. - */ - if (unlikely(skb_headroom(skb) < dev->hard_header_len - ETH_HLEN)) { - struct sk_buff *orig_skb = skb; - - if (net_ratelimit()) - printk(KERN_ERR - "%s: Tx packet has inadequate headroom\n", - dev->name); - skb = skb_realloc_headroom(skb, sizeof(struct cpl_tx_pkt_lso)); - dev_kfree_skb_any(orig_skb); - if (!skb) - return -ENOMEM; - } +#ifdef NETIF_F_TSO if (skb_shinfo(skb)->tso_size) { int eth_type; struct cpl_tx_pkt_lso *hdr; + st->tso++; + eth_type = skb->nh.raw - skb->data == ETH_HLEN ? CPL_ETH_II : CPL_ETH_II_VLAN; @@ -1373,40 +1436,72 @@ int t1_start_xmit(struct sk_buff *skb, struct net_device *dev) skb_shinfo(skb)->tso_size)); hdr->len = htonl(skb->len - sizeof(*hdr)); cpl = (struct cpl_tx_pkt *)hdr; + sge->stats.tx_lso_pkts++; } else +#endif { /* - * An Ethernet packet must have at least space for - * the DIX Ethernet header and be no greater than - * the device set MTU. Otherwise trash the packet. + * Packets shorter than ETH_HLEN can break the MAC, drop them + * early. Also, we may get oversized packets because some + * parts of the kernel don't handle our unusual hard_header_len + * right, drop those too. */ - if (skb->len < ETH_HLEN) - goto t1_start_xmit_fail2; - eth = (struct ethhdr *)skb->data; - if (eth->h_proto == htons(ETH_P_8021Q)) - max_len = dev->mtu + VLAN_ETH_HLEN; - else - max_len = dev->mtu + ETH_HLEN; - if (skb->len > max_len) - goto t1_start_xmit_fail2; + if (unlikely(skb->len < ETH_HLEN || + skb->len > dev->mtu + eth_hdr_len(skb->data))) { + dev_kfree_skb_any(skb); + return NET_XMIT_SUCCESS; + } + + /* + * We are using a non-standard hard_header_len and some kernel + * components, such as pktgen, do not handle it right. + * Complain when this happens but try to fix things up. + */ + if (unlikely(skb_headroom(skb) < + dev->hard_header_len - ETH_HLEN)) { + struct sk_buff *orig_skb = skb; + + if (net_ratelimit()) + printk(KERN_ERR "%s: inadequate headroom in " + "Tx packet\n", dev->name); + skb = skb_realloc_headroom(skb, sizeof(*cpl)); + dev_kfree_skb_any(orig_skb); + if (!skb) + return -ENOMEM; + } if (!(adapter->flags & UDP_CSUM_CAPABLE) && skb->ip_summed == CHECKSUM_HW && - skb->nh.iph->protocol == IPPROTO_UDP && - skb_checksum_help(skb, 0)) - goto t1_start_xmit_fail3; - + skb->nh.iph->protocol == IPPROTO_UDP) + if (unlikely(skb_checksum_help(skb, 0))) { + dev_kfree_skb_any(skb); + return -ENOMEM; + } - if (!adapter->sge->pskb) { + /* Hmmm, assuming to catch the gratious arp... and we'll use + * it to flush out stuck espi packets... + */ + if (unlikely(!adapter->sge->espibug_skb)) { if (skb->protocol == htons(ETH_P_ARP) && - skb->nh.arph->ar_op == htons(ARPOP_REQUEST)) - adapter->sge->pskb = skb; + skb->nh.arph->ar_op == htons(ARPOP_REQUEST)) { + adapter->sge->espibug_skb = skb; + /* We want to re-use this skb later. We + * simply bump the reference count and it + * will not be freed... + */ + skb = skb_get(skb); + } } - cpl = (struct cpl_tx_pkt *)skb_push(skb, sizeof(*cpl)); + + cpl = (struct cpl_tx_pkt *)__skb_push(skb, sizeof(*cpl)); cpl->opcode = CPL_TX_PKT; cpl->ip_csum_dis = 1; /* SW calculates IP csum */ cpl->l4_csum_dis = skb->ip_summed == CHECKSUM_HW ? 0 : 1; /* the length field isn't used so don't bother setting it */ + + st->tx_cso += (skb->ip_summed == CHECKSUM_HW); + sge->stats.tx_do_cksum += (skb->ip_summed == CHECKSUM_HW); + sge->stats.tx_reg_pkts++; } cpl->iff = dev->if_port; @@ -1414,38 +1509,176 @@ int t1_start_xmit(struct sk_buff *skb, struct net_device *dev) if (adapter->vlan_grp && vlan_tx_tag_present(skb)) { cpl->vlan_valid = 1; cpl->vlan = htons(vlan_tx_tag_get(skb)); + st->vlan_insert++; } else #endif cpl->vlan_valid = 0; dev->trans_start = jiffies; - return t1_sge_tx(skb, adapter, 0); + return t1_sge_tx(skb, adapter, 0, dev); +} -t1_start_xmit_fail3: - printk(KERN_INFO "%s: Unable to complete checksum\n", dev->name); - goto t1_start_xmit_fail1; +/* + * Callback for the Tx buffer reclaim timer. Runs with softirqs disabled. + */ +static void sge_tx_reclaim_cb(unsigned long data) +{ + int i; + struct sge *sge = (struct sge *)data; + + for (i = 0; i < SGE_CMDQ_N; ++i) { + struct cmdQ *q = &sge->cmdQ[i]; + + if (!spin_trylock(&q->lock)) + continue; -t1_start_xmit_fail2: - printk(KERN_INFO "%s: Invalid packet length %d, dropping\n", - dev->name, skb->len); + reclaim_completed_tx(sge, q); + if (i == 0 && q->in_use) /* flush pending credits */ + writel(F_CMDQ0_ENABLE, + sge->adapter->regs + A_SG_DOORBELL); -t1_start_xmit_fail1: - dev_kfree_skb_any(skb); + spin_unlock(&q->lock); + } + mod_timer(&sge->tx_reclaim_timer, jiffies + TX_RECLAIM_PERIOD); +} + +/* + * Propagate changes of the SGE coalescing parameters to the HW. + */ +int t1_sge_set_coalesce_params(struct sge *sge, struct sge_params *p) +{ + sge->netdev->poll = t1_poll; + sge->fixed_intrtimer = p->rx_coalesce_usecs * + core_ticks_per_usec(sge->adapter); + writel(sge->fixed_intrtimer, sge->adapter->regs + A_SG_INTRTIMER); return 0; } -void t1_sge_set_ptimeout(adapter_t *adapter, u32 val) +/* + * Allocates both RX and TX resources and configures the SGE. However, + * the hardware is not enabled yet. + */ +int t1_sge_configure(struct sge *sge, struct sge_params *p) { - struct sge *sge = adapter->sge; + if (alloc_rx_resources(sge, p)) + return -ENOMEM; + if (alloc_tx_resources(sge, p)) { + free_rx_resources(sge); + return -ENOMEM; + } + configure_sge(sge, p); + + /* + * Now that we have sized the free lists calculate the payload + * capacity of the large buffers. Other parts of the driver use + * this to set the max offload coalescing size so that RX packets + * do not overflow our large buffers. + */ + p->large_buf_capacity = jumbo_payload_capacity(sge); + return 0; +} - if (is_T2(adapter)) - sge->ptimeout = max((u32)((HZ * val) / 1000), (u32)1); +/* + * Disables the DMA engine. + */ +void t1_sge_stop(struct sge *sge) +{ + writel(0, sge->adapter->regs + A_SG_CONTROL); + (void) readl(sge->adapter->regs + A_SG_CONTROL); /* flush */ + if (is_T2(sge->adapter)) + del_timer_sync(&sge->espibug_timer); + del_timer_sync(&sge->tx_reclaim_timer); } -u32 t1_sge_get_ptimeout(adapter_t *adapter) +/* + * Enables the DMA engine. + */ +void t1_sge_start(struct sge *sge) { + refill_free_list(sge, &sge->freelQ[0]); + refill_free_list(sge, &sge->freelQ[1]); + + writel(sge->sge_control, sge->adapter->regs + A_SG_CONTROL); + doorbell_pio(sge->adapter, F_FL0_ENABLE | F_FL1_ENABLE); + (void) readl(sge->adapter->regs + A_SG_CONTROL); /* flush */ + + mod_timer(&sge->tx_reclaim_timer, jiffies + TX_RECLAIM_PERIOD); + + if (is_T2(sge->adapter)) + mod_timer(&sge->espibug_timer, jiffies + sge->espibug_timeout); +} + +/* + * Callback for the T2 ESPI 'stuck packet feature' workaorund + */ +static void espibug_workaround(void *data) +{ + struct adapter *adapter = (struct adapter *)data; struct sge *sge = adapter->sge; - return (is_T2(adapter) ? ((sge->ptimeout * 1000) / HZ) : 0); + if (netif_running(adapter->port[0].dev)) { + struct sk_buff *skb = sge->espibug_skb; + + u32 seop = t1_espi_get_mon(adapter, 0x930, 0); + + if ((seop & 0xfff0fff) == 0xfff && skb) { + if (!skb->cb[0]) { + u8 ch_mac_addr[ETH_ALEN] = + {0x0, 0x7, 0x43, 0x0, 0x0, 0x0}; + memcpy(skb->data + sizeof(struct cpl_tx_pkt), + ch_mac_addr, ETH_ALEN); + memcpy(skb->data + skb->len - 10, ch_mac_addr, + ETH_ALEN); + skb->cb[0] = 0xff; + } + + /* bump the reference count to avoid freeing of the + * skb once the DMA has completed. + */ + skb = skb_get(skb); + t1_sge_tx(skb, adapter, 0, adapter->port[0].dev); + } + } + mod_timer(&sge->espibug_timer, jiffies + sge->espibug_timeout); } +/* + * Creates a t1_sge structure and returns suggested resource parameters. + */ +struct sge * __devinit t1_sge_create(struct adapter *adapter, + struct sge_params *p) +{ + struct sge *sge = kmalloc(sizeof(*sge), GFP_KERNEL); + + if (!sge) + return NULL; + memset(sge, 0, sizeof(*sge)); + + sge->adapter = adapter; + sge->netdev = adapter->port[0].dev; + sge->rx_pkt_pad = t1_is_T1B(adapter) ? 0 : 2; + sge->jumbo_fl = t1_is_T1B(adapter) ? 1 : 0; + + init_timer(&sge->tx_reclaim_timer); + sge->tx_reclaim_timer.data = (unsigned long)sge; + sge->tx_reclaim_timer.function = sge_tx_reclaim_cb; + + if (is_T2(sge->adapter)) { + init_timer(&sge->espibug_timer); + sge->espibug_timer.function = (void *)&espibug_workaround; + sge->espibug_timer.data = (unsigned long)sge->adapter; + sge->espibug_timeout = 1; + } + + + p->cmdQ_size[0] = SGE_CMDQ0_E_N; + p->cmdQ_size[1] = SGE_CMDQ1_E_N; + p->freelQ_size[!sge->jumbo_fl] = SGE_FREEL_SIZE; + p->freelQ_size[sge->jumbo_fl] = SGE_JUMBO_FREEL_SIZE; + p->rx_coalesce_usecs = 50; + p->coalesce_enable = 0; + p->sample_interval_usecs = 0; + p->polling = 0; + + return sge; +} diff --git a/drivers/net/chelsio/sge.h b/drivers/net/chelsio/sge.h index 140f896def6..434b2558685 100644 --- a/drivers/net/chelsio/sge.h +++ b/drivers/net/chelsio/sge.h @@ -1,8 +1,8 @@ /***************************************************************************** * * * File: sge.h * - * $Revision: 1.7 $ * - * $Date: 2005/03/23 07:15:59 $ * + * $Revision: 1.11 $ * + * $Date: 2005/06/21 22:10:55 $ * * Description: * * part of the Chelsio 10Gb Ethernet Driver. * * * @@ -36,25 +36,50 @@ * * ****************************************************************************/ -#ifndef _CHELSIO_LINUX_SGE_H_ -#define _CHELSIO_LINUX_SGE_H_ +#ifndef _CXGB_SGE_H_ +#define _CXGB_SGE_H_ #include #include #include +#ifndef IRQ_RETVAL +#define IRQ_RETVAL(x) +typedef void irqreturn_t; +#endif + +typedef irqreturn_t (*intr_handler_t)(int, void *, struct pt_regs *); + struct sge_intr_counts { unsigned int respQ_empty; /* # times respQ empty */ unsigned int respQ_overflow; /* # respQ overflow (fatal) */ unsigned int freelistQ_empty; /* # times freelist empty */ unsigned int pkt_too_big; /* packet too large (fatal) */ unsigned int pkt_mismatch; - unsigned int cmdQ_full[2]; /* not HW interrupt, host cmdQ[] full */ + unsigned int cmdQ_full[3]; /* not HW IRQ, host cmdQ[] full */ + unsigned int cmdQ_restarted[3];/* # of times cmdQ X was restarted */ + unsigned int ethernet_pkts; /* # of Ethernet packets received */ + unsigned int offload_pkts; /* # of offload packets received */ + unsigned int offload_bundles; /* # of offload pkt bundles delivered */ + unsigned int pure_rsps; /* # of non-payload responses */ + unsigned int unhandled_irqs; /* # of unhandled interrupts */ + unsigned int tx_ipfrags; + unsigned int tx_reg_pkts; + unsigned int tx_lso_pkts; + unsigned int tx_do_cksum; +}; + +struct sge_port_stats { + unsigned long rx_cso_good; /* # of successful RX csum offloads */ + unsigned long tx_cso; /* # of TX checksum offloads */ + unsigned long vlan_xtract; /* # of VLAN tag extractions */ + unsigned long vlan_insert; /* # of VLAN tag extractions */ + unsigned long tso; /* # of TSO requests */ + unsigned long rx_drops; /* # of packets dropped due to no mem */ }; struct sk_buff; struct net_device; -struct cxgbdev; struct adapter; struct sge_params; struct sge; @@ -63,7 +88,9 @@ struct sge *t1_sge_create(struct adapter *, struct sge_params *); int t1_sge_configure(struct sge *, struct sge_params *); int t1_sge_set_coalesce_params(struct sge *, struct sge_params *); void t1_sge_destroy(struct sge *); -irqreturn_t t1_interrupt(int, void *, struct pt_regs *); +intr_handler_t t1_select_intr_handler(adapter_t *adapter); +unsigned int t1_sge_tx(struct sk_buff *skb, struct adapter *adapter, + unsigned int qid, struct net_device *netdev); int t1_start_xmit(struct sk_buff *skb, struct net_device *dev); void t1_set_vlan_accel(struct adapter *adapter, int on_off); void t1_sge_start(struct sge *); @@ -72,8 +99,7 @@ int t1_sge_intr_error_handler(struct sge *); void t1_sge_intr_enable(struct sge *); void t1_sge_intr_disable(struct sge *); void t1_sge_intr_clear(struct sge *); +const struct sge_intr_counts *t1_sge_get_intr_counts(struct sge *sge); +const struct sge_port_stats *t1_sge_get_port_stats(struct sge *sge, int port); -void t1_sge_set_ptimeout(adapter_t *adapter, u32 val); -u32 t1_sge_get_ptimeout(adapter_t *adapter); - -#endif /* _CHELSIO_LINUX_SGE_H_ */ +#endif /* _CXGB_SGE_H_ */ diff --git a/drivers/net/chelsio/subr.c b/drivers/net/chelsio/subr.c index a90a3f95fca..1ebb5d149ae 100644 --- a/drivers/net/chelsio/subr.c +++ b/drivers/net/chelsio/subr.c @@ -1,8 +1,8 @@ /***************************************************************************** * * * File: subr.c * - * $Revision: 1.12 $ * - * $Date: 2005/03/23 07:41:27 $ * + * $Revision: 1.27 $ * + * $Date: 2005/06/22 01:08:36 $ * * Description: * * Various subroutines (intr,pio,etc.) used by Chelsio 10G Ethernet driver. * * part of the Chelsio 10Gb Ethernet Driver. * @@ -40,11 +40,9 @@ #include "common.h" #include "elmer0.h" #include "regs.h" - #include "gmac.h" #include "cphy.h" #include "sge.h" -#include "tp.h" #include "espi.h" /** @@ -64,7 +62,7 @@ static int t1_wait_op_done(adapter_t *adapter, int reg, u32 mask, int polarity, int attempts, int delay) { while (1) { - u32 val = t1_read_reg_4(adapter, reg) & mask; + u32 val = readl(adapter->regs + reg) & mask; if (!!val == polarity) return 0; @@ -84,9 +82,9 @@ static int __t1_tpi_write(adapter_t *adapter, u32 addr, u32 value) { int tpi_busy; - t1_write_reg_4(adapter, A_TPI_ADDR, addr); - t1_write_reg_4(adapter, A_TPI_WR_DATA, value); - t1_write_reg_4(adapter, A_TPI_CSR, F_TPIWR); + writel(addr, adapter->regs + A_TPI_ADDR); + writel(value, adapter->regs + A_TPI_WR_DATA); + writel(F_TPIWR, adapter->regs + A_TPI_CSR); tpi_busy = t1_wait_op_done(adapter, A_TPI_CSR, F_TPIRDY, 1, TPI_ATTEMPTS, 3); @@ -100,9 +98,9 @@ int t1_tpi_write(adapter_t *adapter, u32 addr, u32 value) { int ret; - TPI_LOCK(adapter); + spin_lock(&(adapter)->tpi_lock); ret = __t1_tpi_write(adapter, addr, value); - TPI_UNLOCK(adapter); + spin_unlock(&(adapter)->tpi_lock); return ret; } @@ -113,8 +111,8 @@ static int __t1_tpi_read(adapter_t *adapter, u32 addr, u32 *valp) { int tpi_busy; - t1_write_reg_4(adapter, A_TPI_ADDR, addr); - t1_write_reg_4(adapter, A_TPI_CSR, 0); + writel(addr, adapter->regs + A_TPI_ADDR); + writel(0, adapter->regs + A_TPI_CSR); tpi_busy = t1_wait_op_done(adapter, A_TPI_CSR, F_TPIRDY, 1, TPI_ATTEMPTS, 3); @@ -122,7 +120,7 @@ static int __t1_tpi_read(adapter_t *adapter, u32 addr, u32 *valp) CH_ALERT("%s: TPI read from 0x%x failed\n", adapter->name, addr); else - *valp = t1_read_reg_4(adapter, A_TPI_RD_DATA); + *valp = readl(adapter->regs + A_TPI_RD_DATA); return tpi_busy; } @@ -130,20 +128,12 @@ int t1_tpi_read(adapter_t *adapter, u32 addr, u32 *valp) { int ret; - TPI_LOCK(adapter); + spin_lock(&(adapter)->tpi_lock); ret = __t1_tpi_read(adapter, addr, valp); - TPI_UNLOCK(adapter); + spin_unlock(&(adapter)->tpi_lock); return ret; } -/* - * Set a TPI parameter. - */ -static void t1_tpi_par(adapter_t *adapter, u32 value) -{ - t1_write_reg_4(adapter, A_TPI_PAR, V_TPIPAR(value)); -} - /* * Called when a port's link settings change to propagate the new values to the * associated PHY and MAC. After performing the common tasks it invokes an @@ -227,7 +217,7 @@ static int mi1_mdio_ext_read(adapter_t *adapter, int phy_addr, int mmd_addr, { u32 addr = V_MI1_REG_ADDR(mmd_addr) | V_MI1_PHY_ADDR(phy_addr); - TPI_LOCK(adapter); + spin_lock(&(adapter)->tpi_lock); /* Write the address we want. */ __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_ADDR, addr); @@ -242,7 +232,7 @@ static int mi1_mdio_ext_read(adapter_t *adapter, int phy_addr, int mmd_addr, /* Read the data. */ __t1_tpi_read(adapter, A_ELMER0_PORT0_MI1_DATA, valp); - TPI_UNLOCK(adapter); + spin_unlock(&(adapter)->tpi_lock); return 0; } @@ -251,7 +241,7 @@ static int mi1_mdio_ext_write(adapter_t *adapter, int phy_addr, int mmd_addr, { u32 addr = V_MI1_REG_ADDR(mmd_addr) | V_MI1_PHY_ADDR(phy_addr); - TPI_LOCK(adapter); + spin_lock(&(adapter)->tpi_lock); /* Write the address we want. */ __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_ADDR, addr); @@ -264,7 +254,7 @@ static int mi1_mdio_ext_write(adapter_t *adapter, int phy_addr, int mmd_addr, __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_DATA, val); __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_OP, MI1_OP_INDIRECT_WRITE); mi1_wait_until_ready(adapter, A_ELMER0_PORT0_MI1_OP); - TPI_UNLOCK(adapter); + spin_unlock(&(adapter)->tpi_lock); return 0; } @@ -277,7 +267,6 @@ static struct mdio_ops mi1_mdio_ext_ops = { enum { CH_BRD_N110_1F, CH_BRD_N210_1F, - CH_BRD_T210_1F, }; static struct board_info t1_board[] = { @@ -308,13 +297,15 @@ struct pci_device_id t1_pci_tbl[] = { { 0, } }; +MODULE_DEVICE_TABLE(pci, t1_pci_tbl); + /* * Return the board_info structure with a given index. Out-of-range indices * return NULL. */ const struct board_info *t1_get_board_info(unsigned int board_id) { - return board_id < DIMOF(t1_board) ? &t1_board[board_id] : NULL; + return board_id < ARRAY_SIZE(t1_board) ? &t1_board[board_id] : NULL; } struct chelsio_vpd_t { @@ -436,7 +427,6 @@ int elmer0_ext_intr_handler(adapter_t *adapter) t1_tpi_read(adapter, A_ELMER0_INT_CAUSE, &cause); switch (board_info(adapter)->board) { - case CHBT_BOARD_CHT210: case CHBT_BOARD_N210: case CHBT_BOARD_N110: if (cause & ELMER0_GP_BIT6) { /* Marvell 88x2010 interrupt */ @@ -446,23 +436,6 @@ int elmer0_ext_intr_handler(adapter_t *adapter) link_changed(adapter, 0); } break; - case CHBT_BOARD_8000: - case CHBT_BOARD_CHT110: - CH_DBG(adapter, INTR, "External interrupt cause 0x%x\n", - cause); - if (cause & ELMER0_GP_BIT1) { /* PMC3393 INTB */ - struct cmac *mac = adapter->port[0].mac; - - mac->ops->interrupt_handler(mac); - } - if (cause & ELMER0_GP_BIT5) { /* XPAK MOD_DETECT */ - u32 mod_detect; - - t1_tpi_read(adapter, A_ELMER0_GPI_STAT, &mod_detect); - CH_MSG(adapter, INFO, LINK, "XPAK %s\n", - mod_detect ? "removed" : "inserted"); - } - break; } t1_tpi_write(adapter, A_ELMER0_INT_CAUSE, cause); return 0; @@ -472,11 +445,11 @@ int elmer0_ext_intr_handler(adapter_t *adapter) void t1_interrupts_enable(adapter_t *adapter) { unsigned int i; + u32 pl_intr; - adapter->slow_intr_mask = F_PL_INTR_SGE_ERR | F_PL_INTR_TP; + adapter->slow_intr_mask = F_PL_INTR_SGE_ERR; t1_sge_intr_enable(adapter->sge); - t1_tp_intr_enable(adapter->tp); if (adapter->espi) { adapter->slow_intr_mask |= F_PL_INTR_ESPI; t1_espi_intr_enable(adapter->espi); @@ -489,17 +462,15 @@ void t1_interrupts_enable(adapter_t *adapter) } /* Enable PCIX & external chip interrupts on ASIC boards. */ - if (t1_is_asic(adapter)) { - u32 pl_intr = t1_read_reg_4(adapter, A_PL_ENABLE); + pl_intr = readl(adapter->regs + A_PL_ENABLE); - /* PCI-X interrupts */ - pci_write_config_dword(adapter->pdev, A_PCICFG_INTR_ENABLE, - 0xffffffff); + /* PCI-X interrupts */ + pci_write_config_dword(adapter->pdev, A_PCICFG_INTR_ENABLE, + 0xffffffff); - adapter->slow_intr_mask |= F_PL_INTR_EXT | F_PL_INTR_PCIX; - pl_intr |= F_PL_INTR_EXT | F_PL_INTR_PCIX; - t1_write_reg_4(adapter, A_PL_ENABLE, pl_intr); - } + adapter->slow_intr_mask |= F_PL_INTR_EXT | F_PL_INTR_PCIX; + pl_intr |= F_PL_INTR_EXT | F_PL_INTR_PCIX; + writel(pl_intr, adapter->regs + A_PL_ENABLE); } /* Disables all interrupts. */ @@ -508,7 +479,6 @@ void t1_interrupts_disable(adapter_t* adapter) unsigned int i; t1_sge_intr_disable(adapter->sge); - t1_tp_intr_disable(adapter->tp); if (adapter->espi) t1_espi_intr_disable(adapter->espi); @@ -519,8 +489,7 @@ void t1_interrupts_disable(adapter_t* adapter) } /* Disable PCIX & external chip interrupts. */ - if (t1_is_asic(adapter)) - t1_write_reg_4(adapter, A_PL_ENABLE, 0); + writel(0, adapter->regs + A_PL_ENABLE); /* PCI-X interrupts */ pci_write_config_dword(adapter->pdev, A_PCICFG_INTR_ENABLE, 0); @@ -532,9 +501,10 @@ void t1_interrupts_disable(adapter_t* adapter) void t1_interrupts_clear(adapter_t* adapter) { unsigned int i; + u32 pl_intr; + t1_sge_intr_clear(adapter->sge); - t1_tp_intr_clear(adapter->tp); if (adapter->espi) t1_espi_intr_clear(adapter->espi); @@ -545,12 +515,10 @@ void t1_interrupts_clear(adapter_t* adapter) } /* Enable interrupts for external devices. */ - if (t1_is_asic(adapter)) { - u32 pl_intr = t1_read_reg_4(adapter, A_PL_CAUSE); + pl_intr = readl(adapter->regs + A_PL_CAUSE); - t1_write_reg_4(adapter, A_PL_CAUSE, - pl_intr | F_PL_INTR_EXT | F_PL_INTR_PCIX); - } + writel(pl_intr | F_PL_INTR_EXT | F_PL_INTR_PCIX, + adapter->regs + A_PL_CAUSE); /* PCI-X interrupts */ pci_write_config_dword(adapter->pdev, A_PCICFG_INTR_CAUSE, 0xffffffff); @@ -559,17 +527,15 @@ void t1_interrupts_clear(adapter_t* adapter) /* * Slow path interrupt handler for ASICs. */ -static int asic_slow_intr(adapter_t *adapter) +int t1_slow_intr_handler(adapter_t *adapter) { - u32 cause = t1_read_reg_4(adapter, A_PL_CAUSE); + u32 cause = readl(adapter->regs + A_PL_CAUSE); cause &= adapter->slow_intr_mask; if (!cause) return 0; if (cause & F_PL_INTR_SGE_ERR) t1_sge_intr_error_handler(adapter->sge); - if (cause & F_PL_INTR_TP) - t1_tp_intr_handler(adapter->tp); if (cause & F_PL_INTR_ESPI) t1_espi_intr_handler(adapter->espi); if (cause & F_PL_INTR_PCIX) @@ -578,41 +544,82 @@ static int asic_slow_intr(adapter_t *adapter) t1_elmer0_ext_intr(adapter); /* Clear the interrupts just processed. */ - t1_write_reg_4(adapter, A_PL_CAUSE, cause); - (void)t1_read_reg_4(adapter, A_PL_CAUSE); /* flush writes */ + writel(cause, adapter->regs + A_PL_CAUSE); + (void)readl(adapter->regs + A_PL_CAUSE); /* flush writes */ return 1; } -int t1_slow_intr_handler(adapter_t *adapter) +/* Pause deadlock avoidance parameters */ +#define DROP_MSEC 16 +#define DROP_PKTS_CNT 1 + +static void set_csum_offload(adapter_t *adapter, u32 csum_bit, int enable) +{ + u32 val = readl(adapter->regs + A_TP_GLOBAL_CONFIG); + + if (enable) + val |= csum_bit; + else + val &= ~csum_bit; + writel(val, adapter->regs + A_TP_GLOBAL_CONFIG); +} + +void t1_tp_set_ip_checksum_offload(adapter_t *adapter, int enable) { - return asic_slow_intr(adapter); + set_csum_offload(adapter, F_IP_CSUM, enable); } -/* Power sequencing is a work-around for Intel's XPAKs. */ -static void power_sequence_xpak(adapter_t* adapter) +void t1_tp_set_udp_checksum_offload(adapter_t *adapter, int enable) { - u32 mod_detect; - u32 gpo; + set_csum_offload(adapter, F_UDP_CSUM, enable); +} - /* Check for XPAK */ - t1_tpi_read(adapter, A_ELMER0_GPI_STAT, &mod_detect); - if (!(ELMER0_GP_BIT5 & mod_detect)) { - /* XPAK is present */ - t1_tpi_read(adapter, A_ELMER0_GPO, &gpo); - gpo |= ELMER0_GP_BIT18; - t1_tpi_write(adapter, A_ELMER0_GPO, gpo); +void t1_tp_set_tcp_checksum_offload(adapter_t *adapter, int enable) +{ + set_csum_offload(adapter, F_TCP_CSUM, enable); +} + +static void t1_tp_reset(adapter_t *adapter, unsigned int tp_clk) +{ + u32 val; + + val = F_TP_IN_CSPI_CPL | F_TP_IN_CSPI_CHECK_IP_CSUM | + F_TP_IN_CSPI_CHECK_TCP_CSUM | F_TP_IN_ESPI_ETHERNET; + val |= F_TP_IN_ESPI_CHECK_IP_CSUM | + F_TP_IN_ESPI_CHECK_TCP_CSUM; + writel(val, adapter->regs + A_TP_IN_CONFIG); + writel(F_TP_OUT_CSPI_CPL | + F_TP_OUT_ESPI_ETHERNET | + F_TP_OUT_ESPI_GENERATE_IP_CSUM | + F_TP_OUT_ESPI_GENERATE_TCP_CSUM, + adapter->regs + A_TP_OUT_CONFIG); + + val = readl(adapter->regs + A_TP_GLOBAL_CONFIG); + val &= ~(F_IP_CSUM | F_UDP_CSUM | F_TCP_CSUM); + writel(val, adapter->regs + A_TP_GLOBAL_CONFIG); + + /* + * Enable pause frame deadlock prevention. + */ + if (is_T2(adapter)) { + u32 drop_ticks = DROP_MSEC * (tp_clk / 1000); + + writel(F_ENABLE_TX_DROP | F_ENABLE_TX_ERROR | + V_DROP_TICKS_CNT(drop_ticks) | + V_NUM_PKTS_DROPPED(DROP_PKTS_CNT), + adapter->regs + A_TP_TX_DROP_CONFIG); } + + writel(F_TP_RESET, adapter->regs + A_TP_RESET); } int __devinit t1_get_board_rev(adapter_t *adapter, const struct board_info *bi, struct adapter_params *p) { p->chip_version = bi->chip_term; - p->is_asic = (p->chip_version != CHBT_TERM_FPGA); if (p->chip_version == CHBT_TERM_T1 || - p->chip_version == CHBT_TERM_T2 || - p->chip_version == CHBT_TERM_FPGA) { - u32 val = t1_read_reg_4(adapter, A_TP_PC_CONFIG); + p->chip_version == CHBT_TERM_T2) { + u32 val = readl(adapter->regs + A_TP_PC_CONFIG); val = G_TP_PC_REV(val); if (val == 2) @@ -633,23 +640,11 @@ int __devinit t1_get_board_rev(adapter_t *adapter, const struct board_info *bi, static int board_init(adapter_t *adapter, const struct board_info *bi) { switch (bi->board) { - case CHBT_BOARD_8000: case CHBT_BOARD_N110: case CHBT_BOARD_N210: - case CHBT_BOARD_CHT210: - case CHBT_BOARD_COUGAR: - t1_tpi_par(adapter, 0xf); + writel(V_TPIPAR(0xf), adapter->regs + A_TPI_PAR); t1_tpi_write(adapter, A_ELMER0_GPO, 0x800); break; - case CHBT_BOARD_CHT110: - t1_tpi_par(adapter, 0xf); - t1_tpi_write(adapter, A_ELMER0_GPO, 0x1800); - - /* TBD XXX Might not need. This fixes a problem - * described in the Intel SR XPAK errata. - */ - power_sequence_xpak(adapter); - break; } return 0; } @@ -663,20 +658,19 @@ int t1_init_hw_modules(adapter_t *adapter) int err = -EIO; const struct board_info *bi = board_info(adapter); - if (!adapter->mc4) { - u32 val = t1_read_reg_4(adapter, A_MC4_CFG); + if (!bi->clock_mc4) { + u32 val = readl(adapter->regs + A_MC4_CFG); - t1_write_reg_4(adapter, A_MC4_CFG, val | F_READY | F_MC4_SLOW); - t1_write_reg_4(adapter, A_MC5_CONFIG, - F_M_BUS_ENABLE | F_TCAM_RESET); + writel(val | F_READY | F_MC4_SLOW, adapter->regs + A_MC4_CFG); + writel(F_M_BUS_ENABLE | F_TCAM_RESET, + adapter->regs + A_MC5_CONFIG); } if (adapter->espi && t1_espi_init(adapter->espi, bi->chip_mac, bi->espi_nports)) goto out_err; - if (t1_tp_reset(adapter->tp, &adapter->params.tp, bi->clock_core)) - goto out_err; + t1_tp_reset(adapter, bi->clock_core); err = t1_sge_configure(adapter->sge, &adapter->params.sge); if (err) @@ -690,7 +684,7 @@ int t1_init_hw_modules(adapter_t *adapter) /* * Determine a card's PCI mode. */ -static void __devinit get_pci_mode(adapter_t *adapter, struct pci_params *p) +static void __devinit get_pci_mode(adapter_t *adapter, struct chelsio_pci_params *p) { static unsigned short speed_map[] = { 33, 66, 100, 133 }; u32 pci_mode; @@ -720,8 +714,6 @@ void t1_free_sw_modules(adapter_t *adapter) if (adapter->sge) t1_sge_destroy(adapter->sge); - if (adapter->tp) - t1_tp_destroy(adapter->tp); if (adapter->espi) t1_espi_destroy(adapter->espi); } @@ -764,21 +756,12 @@ int __devinit t1_init_sw_modules(adapter_t *adapter, goto error; } - - if (bi->espi_nports && !(adapter->espi = t1_espi_create(adapter))) { CH_ERR("%s: ESPI initialization failed\n", adapter->name); goto error; } - adapter->tp = t1_tp_create(adapter, &adapter->params.tp); - if (!adapter->tp) { - CH_ERR("%s: TP initialization failed\n", - adapter->name); - goto error; - } - board_init(adapter, bi); bi->mdio_ops->init(adapter, bi); if (bi->gphy->reset) @@ -810,14 +793,12 @@ int __devinit t1_init_sw_modules(adapter_t *adapter, * Get the port's MAC addresses either from the EEPROM if one * exists or the one hardcoded in the MAC. */ - if (!t1_is_asic(adapter) || bi->chip_mac == CHBT_MAC_DUMMY) - mac->ops->macaddress_get(mac, hw_addr); - else if (vpd_macaddress_get(adapter, i, hw_addr)) { + if (vpd_macaddress_get(adapter, i, hw_addr)) { CH_ERR("%s: could not read MAC address from VPD ROM\n", - port_name(adapter, i)); + adapter->port[i].dev->name); goto error; } - t1_set_hw_addr(adapter, i, hw_addr); + memcpy(adapter->port[i].dev->dev_addr, hw_addr, ETH_ALEN); init_link_config(&adapter->port[i].link_config, bi); } diff --git a/drivers/net/chelsio/suni1x10gexp_regs.h b/drivers/net/chelsio/suni1x10gexp_regs.h index 98352bdda89..81816c2b708 100644 --- a/drivers/net/chelsio/suni1x10gexp_regs.h +++ b/drivers/net/chelsio/suni1x10gexp_regs.h @@ -1,8 +1,8 @@ /***************************************************************************** * * * File: suni1x10gexp_regs.h * - * $Revision: 1.4 $ * - * $Date: 2005/03/23 07:15:59 $ * + * $Revision: 1.9 $ * + * $Date: 2005/06/22 00:17:04 $ * * Description: * * PMC/SIERRA (pm3393) MAC-PHY functionality. * * part of the Chelsio 10Gb Ethernet Driver. * @@ -21,24 +21,16 @@ * * * http://www.chelsio.com * * * - * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * - * All rights reserved. * - * * * Maintainers: maintainers@chelsio.com * * * - * Authors: Dimitrios Michailidis * - * Tina Yang * - * Felix Marti * - * Scott Bardone * - * Kurt Ottaway * - * Frank DiMambro * + * Authors: PMC/SIERRA * * * * History: * * * ****************************************************************************/ -#ifndef _SUNI1x10GEXP_REGS_H -#define _SUNI1x10GEXP_REGS_H +#ifndef _CXGB_SUNI1x10GEXP_REGS_H_ +#define _CXGB_SUNI1x10GEXP_REGS_H_ /******************************************************************************/ /** S/UNI-1x10GE-XP REGISTER ADDRESS MAP **/ @@ -217,5 +209,5 @@ #define SUNI1x10GEXP_BITMSK_TXXG_FCRX 0x0004 #define SUNI1x10GEXP_BITMSK_TXXG_PADEN 0x0002 -#endif /* _SUNI1x10GEXP_REGS_H */ +#endif /* _CXGB_SUNI1x10GEXP_REGS_H_ */ diff --git a/drivers/net/chelsio/tp.c b/drivers/net/chelsio/tp.c deleted file mode 100644 index 9ad5c539fd2..00000000000 --- a/drivers/net/chelsio/tp.c +++ /dev/null @@ -1,188 +0,0 @@ -/***************************************************************************** - * * - * File: tp.c * - * $Revision: 1.6 $ * - * $Date: 2005/03/23 07:15:59 $ * - * Description: * - * Core ASIC Management. * - * part of the Chelsio 10Gb Ethernet Driver. * - * * - * This program is free software; you can redistribute it and/or modify * - * it under the terms of the GNU General Public License, version 2, as * - * published by the Free Software Foundation. * - * * - * You should have received a copy of the GNU General Public License along * - * with this program; if not, write to the Free Software Foundation, Inc., * - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * - * * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * - * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * - * * - * http://www.chelsio.com * - * * - * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * - * All rights reserved. * - * * - * Maintainers: maintainers@chelsio.com * - * * - * Authors: Dimitrios Michailidis * - * Tina Yang * - * Felix Marti * - * Scott Bardone * - * Kurt Ottaway * - * Frank DiMambro * - * * - * History: * - * * - ****************************************************************************/ - -#include "common.h" -#include "regs.h" -#include "tp.h" - -struct petp { - adapter_t *adapter; -}; - -/* Pause deadlock avoidance parameters */ -#define DROP_MSEC 16 -#define DROP_PKTS_CNT 1 - - -static void tp_init(adapter_t *ap, const struct tp_params *p, - unsigned int tp_clk) -{ - if (t1_is_asic(ap)) { - u32 val; - - val = F_TP_IN_CSPI_CPL | F_TP_IN_CSPI_CHECK_IP_CSUM | - F_TP_IN_CSPI_CHECK_TCP_CSUM | F_TP_IN_ESPI_ETHERNET; - if (!p->pm_size) - val |= F_OFFLOAD_DISABLE; - else - val |= F_TP_IN_ESPI_CHECK_IP_CSUM | - F_TP_IN_ESPI_CHECK_TCP_CSUM; - t1_write_reg_4(ap, A_TP_IN_CONFIG, val); - t1_write_reg_4(ap, A_TP_OUT_CONFIG, F_TP_OUT_CSPI_CPL | - F_TP_OUT_ESPI_ETHERNET | - F_TP_OUT_ESPI_GENERATE_IP_CSUM | - F_TP_OUT_ESPI_GENERATE_TCP_CSUM); - t1_write_reg_4(ap, A_TP_GLOBAL_CONFIG, V_IP_TTL(64) | - F_PATH_MTU /* IP DF bit */ | - V_5TUPLE_LOOKUP(p->use_5tuple_mode) | - V_SYN_COOKIE_PARAMETER(29)); - - /* - * Enable pause frame deadlock prevention. - */ - if (is_T2(ap)) { - u32 drop_ticks = DROP_MSEC * (tp_clk / 1000); - - t1_write_reg_4(ap, A_TP_TX_DROP_CONFIG, - F_ENABLE_TX_DROP | F_ENABLE_TX_ERROR | - V_DROP_TICKS_CNT(drop_ticks) | - V_NUM_PKTS_DROPPED(DROP_PKTS_CNT)); - } - - } -} - -void t1_tp_destroy(struct petp *tp) -{ - kfree(tp); -} - -struct petp * __devinit t1_tp_create(adapter_t *adapter, struct tp_params *p) -{ - struct petp *tp = kmalloc(sizeof(*tp), GFP_KERNEL); - if (!tp) - return NULL; - memset(tp, 0, sizeof(*tp)); - tp->adapter = adapter; - - return tp; -} - -void t1_tp_intr_enable(struct petp *tp) -{ - u32 tp_intr = t1_read_reg_4(tp->adapter, A_PL_ENABLE); - - { - /* We don't use any TP interrupts */ - t1_write_reg_4(tp->adapter, A_TP_INT_ENABLE, 0); - t1_write_reg_4(tp->adapter, A_PL_ENABLE, - tp_intr | F_PL_INTR_TP); - } -} - -void t1_tp_intr_disable(struct petp *tp) -{ - u32 tp_intr = t1_read_reg_4(tp->adapter, A_PL_ENABLE); - - { - t1_write_reg_4(tp->adapter, A_TP_INT_ENABLE, 0); - t1_write_reg_4(tp->adapter, A_PL_ENABLE, - tp_intr & ~F_PL_INTR_TP); - } -} - -void t1_tp_intr_clear(struct petp *tp) -{ - t1_write_reg_4(tp->adapter, A_TP_INT_CAUSE, 0xffffffff); - t1_write_reg_4(tp->adapter, A_PL_CAUSE, F_PL_INTR_TP); -} - -int t1_tp_intr_handler(struct petp *tp) -{ - u32 cause; - - - cause = t1_read_reg_4(tp->adapter, A_TP_INT_CAUSE); - t1_write_reg_4(tp->adapter, A_TP_INT_CAUSE, cause); - return 0; -} - -static void set_csum_offload(struct petp *tp, u32 csum_bit, int enable) -{ - u32 val = t1_read_reg_4(tp->adapter, A_TP_GLOBAL_CONFIG); - - if (enable) - val |= csum_bit; - else - val &= ~csum_bit; - t1_write_reg_4(tp->adapter, A_TP_GLOBAL_CONFIG, val); -} - -void t1_tp_set_ip_checksum_offload(struct petp *tp, int enable) -{ - set_csum_offload(tp, F_IP_CSUM, enable); -} - -void t1_tp_set_udp_checksum_offload(struct petp *tp, int enable) -{ - set_csum_offload(tp, F_UDP_CSUM, enable); -} - -void t1_tp_set_tcp_checksum_offload(struct petp *tp, int enable) -{ - set_csum_offload(tp, F_TCP_CSUM, enable); -} - -/* - * Initialize TP state. tp_params contains initial settings for some TP - * parameters, particularly the one-time PM and CM settings. - */ -int t1_tp_reset(struct petp *tp, struct tp_params *p, unsigned int tp_clk) -{ - int busy = 0; - adapter_t *adapter = tp->adapter; - - tp_init(adapter, p, tp_clk); - if (!busy) - t1_write_reg_4(adapter, A_TP_RESET, F_TP_RESET); - else - CH_ERR("%s: TP initialization timed out\n", - adapter->name); - return busy; -} diff --git a/drivers/net/chelsio/tp.h b/drivers/net/chelsio/tp.h deleted file mode 100644 index 2ebc5c0d62e..00000000000 --- a/drivers/net/chelsio/tp.h +++ /dev/null @@ -1,110 +0,0 @@ -/***************************************************************************** - * * - * File: tp.h * - * $Revision: 1.3 $ * - * $Date: 2005/03/23 07:15:59 $ * - * Description: * - * part of the Chelsio 10Gb Ethernet Driver. * - * * - * This program is free software; you can redistribute it and/or modify * - * it under the terms of the GNU General Public License, version 2, as * - * published by the Free Software Foundation. * - * * - * You should have received a copy of the GNU General Public License along * - * with this program; if not, write to the Free Software Foundation, Inc., * - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * - * * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED * - * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF * - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. * - * * - * http://www.chelsio.com * - * * - * Copyright (c) 2003 - 2005 Chelsio Communications, Inc. * - * All rights reserved. * - * * - * Maintainers: maintainers@chelsio.com * - * * - * Authors: Dimitrios Michailidis * - * Tina Yang * - * Felix Marti * - * Scott Bardone * - * Kurt Ottaway * - * Frank DiMambro * - * * - * History: * - * * - ****************************************************************************/ - -#ifndef CHELSIO_TP_H -#define CHELSIO_TP_H - -#include "common.h" - -#define TP_MAX_RX_COALESCING_SIZE 16224U - -struct tp_mib_statistics { - - /* IP */ - u32 ipInReceive_hi; - u32 ipInReceive_lo; - u32 ipInHdrErrors_hi; - u32 ipInHdrErrors_lo; - u32 ipInAddrErrors_hi; - u32 ipInAddrErrors_lo; - u32 ipInUnknownProtos_hi; - u32 ipInUnknownProtos_lo; - u32 ipInDiscards_hi; - u32 ipInDiscards_lo; - u32 ipInDelivers_hi; - u32 ipInDelivers_lo; - u32 ipOutRequests_hi; - u32 ipOutRequests_lo; - u32 ipOutDiscards_hi; - u32 ipOutDiscards_lo; - u32 ipOutNoRoutes_hi; - u32 ipOutNoRoutes_lo; - u32 ipReasmTimeout; - u32 ipReasmReqds; - u32 ipReasmOKs; - u32 ipReasmFails; - - u32 reserved[8]; - - /* TCP */ - u32 tcpActiveOpens; - u32 tcpPassiveOpens; - u32 tcpAttemptFails; - u32 tcpEstabResets; - u32 tcpOutRsts; - u32 tcpCurrEstab; - u32 tcpInSegs_hi; - u32 tcpInSegs_lo; - u32 tcpOutSegs_hi; - u32 tcpOutSegs_lo; - u32 tcpRetransSeg_hi; - u32 tcpRetransSeg_lo; - u32 tcpInErrs_hi; - u32 tcpInErrs_lo; - u32 tcpRtoMin; - u32 tcpRtoMax; -}; - -struct petp; -struct tp_params; - -struct petp *t1_tp_create(adapter_t *adapter, struct tp_params *p); -void t1_tp_destroy(struct petp *tp); - -void t1_tp_intr_disable(struct petp *tp); -void t1_tp_intr_enable(struct petp *tp); -void t1_tp_intr_clear(struct petp *tp); -int t1_tp_intr_handler(struct petp *tp); - -void t1_tp_get_mib_statistics(adapter_t *adap, struct tp_mib_statistics *tps); -void t1_tp_set_udp_checksum_offload(struct petp *tp, int enable); -void t1_tp_set_tcp_checksum_offload(struct petp *tp, int enable); -void t1_tp_set_ip_checksum_offload(struct petp *tp, int enable); -int t1_tp_set_coalescing_size(struct petp *tp, unsigned int size); -int t1_tp_reset(struct petp *tp, struct tp_params *p, unsigned int tp_clk); -#endif diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 63e89e47b8e..41e35a72b96 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2120,6 +2120,7 @@ #define PCI_DEVICE_ID_ENE_1225 0x1225 #define PCI_DEVICE_ID_ENE_1410 0x1410 #define PCI_DEVICE_ID_ENE_1420 0x1420 +#define PCI_VENDOR_ID_CHELSIO 0x1425 #define PCI_VENDOR_ID_SYBA 0x1592 #define PCI_DEVICE_ID_SYBA_2P_EPP 0x0782 -- cgit v1.2.3