From 6f4347c969674ed45de7d08d4b26d6326a95b959 Mon Sep 17 00:00:00 2001 From: Olaf Hering Date: Thu, 10 Jan 2008 01:06:08 +1100 Subject: [POWERPC] efika: add phy-handle property for fec_mpc52xx The new network driver fec_mpc52xx will not work on efika because the firmware does not provide all required properties. http://www.powerdeveloper.org/asset/by-id/46 has a Forth script to create more properties. But only the phy stuff is required to get a working network. This should go into the kernel because its appearently impossible to boot the script via tftp and then load the real boot binary (yaboot or zimage). Signed-off-by: Olaf Hering Signed-off-by: Grant Likely Acked-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/prom_init.c | 39 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 39 insertions(+) diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index 1add6efdb31..5d89a21dd0d 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -2216,6 +2216,45 @@ static void __init fixup_device_tree_efika(void) prom_printf("fixup_device_tree_efika: ", "skipped entry %x - setprop error\n", i); } + + /* Make sure ethernet mdio bus node exists */ + node = call_prom("finddevice", 1, 1, ADDR("/builtin/mdio")); + if (!PHANDLE_VALID(node)) { + prom_printf("Adding Ethernet MDIO node\n"); + call_prom("interpret", 1, 1, + " s\" /builtin\" find-device" + " new-device" + " 1 encode-int s\" #address-cells\" property" + " 0 encode-int s\" #size-cells\" property" + " s\" mdio\" 2dup device-name device-type" + " s\" mpc5200b-fec-phy\" encode-string" + " s\" compatible\" property" + " 0xf0003000 0x400 reg" + " 0x2 encode-int" + " 0x5 encode-int encode+" + " 0x3 encode-int encode+" + " s\" interrupts\" property" + " finish-device"); + }; + + /* Make sure ethernet phy device node exist */ + node = call_prom("finddevice", 1, 1, ADDR("/builtin/mdio/ethernet-phy")); + if (!PHANDLE_VALID(node)) { + prom_printf("Adding Ethernet PHY node\n"); + call_prom("interpret", 1, 1, + " s\" /builtin/mdio\" find-device" + " new-device" + " s\" ethernet-phy\" device-name" + " 0x10 encode-int s\" reg\" property" + " my-self" + " ihandle>phandle" + " finish-device" + " s\" /builtin/ethernet\" find-device" + " encode-int" + " s\" phy-handle\" property" + " device-end"); + } + } #else #define fixup_device_tree_efika() -- cgit v1.2.3