From ae6ead4623bfbc57f3945ff86f27e51811e2e91b Mon Sep 17 00:00:00 2001
From: Daniel Drake <dsd@gentoo.org>
Date: Sun, 11 Mar 2007 19:54:11 +0000
Subject: [PATCH] zd1211rw: Reject AL2230S devices

zd1211rw currently detects AL2230S-based devices as AL2230, and hence
programs the RF incorrectly. Transmit silently fails on this
misconfiguration.

After this patch, AL2230S devices are rejected with an error message, to
avoid any confusion with an apparent driver bug.

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/zd1211rw/zd_chip.c      | 1 +
 drivers/net/wireless/zd1211rw/zd_chip.h      | 2 +-
 drivers/net/wireless/zd1211rw/zd_rf_al2230.c | 6 ++++++
 3 files changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/zd1211rw/zd_chip.c b/drivers/net/wireless/zd1211rw/zd_chip.c
index 9c64f894b71..9d299bd1885 100644
--- a/drivers/net/wireless/zd1211rw/zd_chip.c
+++ b/drivers/net/wireless/zd1211rw/zd_chip.c
@@ -337,6 +337,7 @@ static int read_pod(struct zd_chip *chip, u8 *rf_type)
 	chip->patch_cr157 = (value >> 13) & 0x1;
 	chip->patch_6m_band_edge = (value >> 21) & 0x1;
 	chip->new_phy_layout = (value >> 31) & 0x1;
+	chip->al2230s_bit = (value >> 7) & 0x1;
 	chip->link_led = ((value >> 4) & 1) ? LED1 : LED2;
 	chip->supports_tx_led = 1;
 	if (value & (1 << 24)) { /* LED scenario */
diff --git a/drivers/net/wireless/zd1211rw/zd_chip.h b/drivers/net/wireless/zd1211rw/zd_chip.h
index b07569e391e..ae39c225bc9 100644
--- a/drivers/net/wireless/zd1211rw/zd_chip.h
+++ b/drivers/net/wireless/zd1211rw/zd_chip.h
@@ -711,7 +711,7 @@ struct zd_chip {
 	u16 link_led;
 	unsigned int pa_type:4,
 		patch_cck_gain:1, patch_cr157:1, patch_6m_band_edge:1,
-		new_phy_layout:1,
+		new_phy_layout:1, al2230s_bit:1,
 		is_zd1211b:1, supports_tx_led:1;
 };
 
diff --git a/drivers/net/wireless/zd1211rw/zd_rf_al2230.c b/drivers/net/wireless/zd1211rw/zd_rf_al2230.c
index 25323a13a3d..5235a7827ac 100644
--- a/drivers/net/wireless/zd1211rw/zd_rf_al2230.c
+++ b/drivers/net/wireless/zd1211rw/zd_rf_al2230.c
@@ -358,6 +358,12 @@ int zd_rf_init_al2230(struct zd_rf *rf)
 {
 	struct zd_chip *chip = zd_rf_to_chip(rf);
 
+	if (chip->al2230s_bit) {
+		dev_err(zd_chip_dev(chip), "AL2230S devices are not yet "
+			"supported by this driver.\n");
+		return -ENODEV;
+	}
+
 	rf->switch_radio_off = al2230_switch_radio_off;
 	if (chip->is_zd1211b) {
 		rf->init_hw = zd1211b_al2230_init_hw;
-- 
cgit v1.2.3


From 92b3e2e9253a9f4c9224071842fd263c334dece0 Mon Sep 17 00:00:00 2001
From: Daniel Drake <dsd@gentoo.org>
Date: Tue, 3 Apr 2007 23:17:37 +0100
Subject: [PATCH] zd1211rw: Fix E2P_PHY_REG patching

Due to conflicting/confusing defines in the vendor driver, we were
reading E2P_PHY_REG from the wrong location.

CR157 patching was slightly incorrect in that the vendor driver only
patches in an 8-bit value, whereas we were patching 24 bits.

Additionally, CR157 patching was happening on both zd1211 and zd1211b,
but this should only happen on zd1211.

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: Ulrich Kunitz <kune@deine-taler.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/zd1211rw/zd_chip.c | 11 +++--------
 drivers/net/wireless/zd1211rw/zd_chip.h |  2 +-
 2 files changed, 4 insertions(+), 9 deletions(-)

diff --git a/drivers/net/wireless/zd1211rw/zd_chip.c b/drivers/net/wireless/zd1211rw/zd_chip.c
index 9d299bd1885..87ee3ee020f 100644
--- a/drivers/net/wireless/zd1211rw/zd_chip.c
+++ b/drivers/net/wireless/zd1211rw/zd_chip.c
@@ -592,16 +592,16 @@ int zd_chip_unlock_phy_regs(struct zd_chip *chip)
 	return r;
 }
 
-/* CR157 can be optionally patched by the EEPROM */
+/* CR157 can be optionally patched by the EEPROM for original ZD1211 */
 static int patch_cr157(struct zd_chip *chip)
 {
 	int r;
-	u32 value;
+	u16 value;
 
 	if (!chip->patch_cr157)
 		return 0;
 
-	r = zd_ioread32_locked(chip, &value, E2P_PHY_REG);
+	r = zd_ioread16_locked(chip, &value, E2P_PHY_REG);
 	if (r)
 		return r;
 
@@ -791,11 +791,6 @@ static int zd1211b_hw_reset_phy(struct zd_chip *chip)
 		goto out;
 
 	r = zd_iowrite16a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs));
-	if (r)
-		goto unlock;
-
-	r = patch_cr157(chip);
-unlock:
 	t = zd_chip_unlock_phy_regs(chip);
 	if (t && !r)
 		r = t;
diff --git a/drivers/net/wireless/zd1211rw/zd_chip.h b/drivers/net/wireless/zd1211rw/zd_chip.h
index ae39c225bc9..e57ed75d942 100644
--- a/drivers/net/wireless/zd1211rw/zd_chip.h
+++ b/drivers/net/wireless/zd1211rw/zd_chip.h
@@ -641,8 +641,8 @@ enum {
  * also only 11 channels. */
 #define E2P_ALLOWED_CHANNEL	E2P_DATA(0x18)
 
-#define E2P_PHY_REG		E2P_DATA(0x1a)
 #define E2P_DEVICE_VER		E2P_DATA(0x20)
+#define E2P_PHY_REG		E2P_DATA(0x25)
 #define E2P_36M_CAL_VALUE1	E2P_DATA(0x28)
 #define E2P_36M_CAL_VALUE2      E2P_DATA(0x2a)
 #define E2P_36M_CAL_VALUE3      E2P_DATA(0x2c)
-- 
cgit v1.2.3


From 81e880064dd32b3efdc41ad4cc2416c4744693ee Mon Sep 17 00:00:00 2001
From: Larry Finger <Larry.Finger@lwfinger.net>
Date: Sat, 7 Apr 2007 13:54:35 -0500
Subject: [PATCH] bcm43xx: Fix 802.11b/g scan limits to match regulatory reqs

In 802.11b/g mode, bcm43xx actively scans channels 1-14 no matter what
locale has been set, either in the sprom or by the locale option. This
behaviorviolates regulatory rules everywhere in the world except
Japan. This patch changes the default range to the correct value if the
locale has been set, and to channels 1-13 if no locale has been set.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/bcm43xx/bcm43xx_main.c | 20 +++++++++++++++++++-
 1 file changed, 19 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_main.c b/drivers/net/wireless/bcm43xx/bcm43xx_main.c
index 80cb88eb98c..a38e7eec0e6 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_main.c
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_main.c
@@ -946,6 +946,7 @@ static int bcm43xx_geo_init(struct bcm43xx_private *bcm)
 	u8 channel;
 	struct bcm43xx_phyinfo *phy;
 	const char *iso_country;
+	u8 max_bg_channel;
 
 	geo = kzalloc(sizeof(*geo), GFP_KERNEL);
 	if (!geo)
@@ -967,6 +968,23 @@ static int bcm43xx_geo_init(struct bcm43xx_private *bcm)
 	}
 	iso_country = bcm43xx_locale_iso(bcm->sprom.locale);
 
+/* set the maximum channel based on locale set in sprom or witle locale option */
+	switch (bcm->sprom.locale) {
+	case BCM43xx_LOCALE_THAILAND:
+	case BCM43xx_LOCALE_ISRAEL:
+	case BCM43xx_LOCALE_JORDAN:
+	case BCM43xx_LOCALE_USA_CANADA_ANZ:
+	case BCM43xx_LOCALE_USA_LOW:
+		max_bg_channel = 11;
+		break;
+	case BCM43xx_LOCALE_JAPAN:
+	case BCM43xx_LOCALE_JAPAN_HIGH:
+		max_bg_channel = 14;
+		break;
+	default:
+		max_bg_channel = 13;
+	}
+
  	if (have_a) {
 		for (i = 0, channel = IEEE80211_52GHZ_MIN_CHANNEL;
 		      channel <= IEEE80211_52GHZ_MAX_CHANNEL; channel++) {
@@ -978,7 +996,7 @@ static int bcm43xx_geo_init(struct bcm43xx_private *bcm)
 	}
 	if (have_bg) {
 		for (i = 0, channel = IEEE80211_24GHZ_MIN_CHANNEL;
-		      channel <= IEEE80211_24GHZ_MAX_CHANNEL; channel++) {
+		      channel <= max_bg_channel; channel++) {
 			chan = &geo->bg[i++];
 			chan->freq = bcm43xx_channel_to_freq_bg(channel);
 			chan->channel = channel;
-- 
cgit v1.2.3


From ec759a2b383b50950be37fbe470c4cc2ca18e2ce Mon Sep 17 00:00:00 2001
From: Larry Finger <Larry.Finger@lwfinger.net>
Date: Sat, 7 Apr 2007 14:11:03 -0500
Subject: [PATCH] bcm43xx: Fix PPC machine checks and match loopback gain specs

The specifications for loopback_gain calculation and for G PHY
initialization have been updated. This patch implements them and
fixes a machine check error that occurs for PPC architecture with a
phy->rev of 1.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/bcm43xx/bcm43xx_phy.c | 57 +++++++++++++++++-------------
 1 file changed, 32 insertions(+), 25 deletions(-)

diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_phy.c b/drivers/net/wireless/bcm43xx/bcm43xx_phy.c
index d1e89be965c..72529a440f1 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_phy.c
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_phy.c
@@ -978,7 +978,7 @@ static void bcm43xx_calc_loopback_gain(struct bcm43xx_private *bcm)
 {
 	struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm);
 	struct bcm43xx_radioinfo *radio = bcm43xx_current_radio(bcm);
-	u16 backup_phy[15];
+	u16 backup_phy[15] = {0};
 	u16 backup_radio[3];
 	u16 backup_bband;
 	u16 i;
@@ -989,8 +989,10 @@ static void bcm43xx_calc_loopback_gain(struct bcm43xx_private *bcm)
 	backup_phy[1] = bcm43xx_phy_read(bcm, 0x0001);
 	backup_phy[2] = bcm43xx_phy_read(bcm, 0x0811);
 	backup_phy[3] = bcm43xx_phy_read(bcm, 0x0812);
-	backup_phy[4] = bcm43xx_phy_read(bcm, 0x0814);
-	backup_phy[5] = bcm43xx_phy_read(bcm, 0x0815);
+	if (phy->rev != 1) {
+		backup_phy[4] = bcm43xx_phy_read(bcm, 0x0814);
+		backup_phy[5] = bcm43xx_phy_read(bcm, 0x0815);
+	}
 	backup_phy[6] = bcm43xx_phy_read(bcm, 0x005A);
 	backup_phy[7] = bcm43xx_phy_read(bcm, 0x0059);
 	backup_phy[8] = bcm43xx_phy_read(bcm, 0x0058);
@@ -1018,14 +1020,16 @@ static void bcm43xx_calc_loopback_gain(struct bcm43xx_private *bcm)
 			  bcm43xx_phy_read(bcm, 0x0811) | 0x0001);
 	bcm43xx_phy_write(bcm, 0x0812,
 			  bcm43xx_phy_read(bcm, 0x0812) & 0xFFFE);
-	bcm43xx_phy_write(bcm, 0x0814,
-			  bcm43xx_phy_read(bcm, 0x0814) | 0x0001);
-	bcm43xx_phy_write(bcm, 0x0815,
-			  bcm43xx_phy_read(bcm, 0x0815) & 0xFFFE);
-	bcm43xx_phy_write(bcm, 0x0814,
-			  bcm43xx_phy_read(bcm, 0x0814) | 0x0002);
-	bcm43xx_phy_write(bcm, 0x0815,
-			  bcm43xx_phy_read(bcm, 0x0815) & 0xFFFD);
+	if (phy->rev != 1) {
+		bcm43xx_phy_write(bcm, 0x0814,
+				  bcm43xx_phy_read(bcm, 0x0814) | 0x0001);
+		bcm43xx_phy_write(bcm, 0x0815,
+				  bcm43xx_phy_read(bcm, 0x0815) & 0xFFFE);
+		bcm43xx_phy_write(bcm, 0x0814,
+				  bcm43xx_phy_read(bcm, 0x0814) | 0x0002);
+		bcm43xx_phy_write(bcm, 0x0815,
+				  bcm43xx_phy_read(bcm, 0x0815) & 0xFFFD);
+	}
 	bcm43xx_phy_write(bcm, 0x0811,
 			  bcm43xx_phy_read(bcm, 0x0811) | 0x000C);
 	bcm43xx_phy_write(bcm, 0x0812,
@@ -1048,10 +1052,12 @@ static void bcm43xx_calc_loopback_gain(struct bcm43xx_private *bcm)
 				  bcm43xx_phy_read(bcm, 0x000A)
 				  | 0x2000);
 	}
-	bcm43xx_phy_write(bcm, 0x0814,
-			  bcm43xx_phy_read(bcm, 0x0814) | 0x0004);
-	bcm43xx_phy_write(bcm, 0x0815,
-			  bcm43xx_phy_read(bcm, 0x0815) & 0xFFFB);
+	if (phy->rev != 1) {
+		bcm43xx_phy_write(bcm, 0x0814,
+				  bcm43xx_phy_read(bcm, 0x0814) | 0x0004);
+		bcm43xx_phy_write(bcm, 0x0815,
+				  bcm43xx_phy_read(bcm, 0x0815) & 0xFFFB);
+	}
 	bcm43xx_phy_write(bcm, 0x0003,
 			  (bcm43xx_phy_read(bcm, 0x0003)
 			   & 0xFF9F) | 0x0040);
@@ -1138,8 +1144,10 @@ static void bcm43xx_calc_loopback_gain(struct bcm43xx_private *bcm)
 		}
 	}
 
-	bcm43xx_phy_write(bcm, 0x0814, backup_phy[4]);
-	bcm43xx_phy_write(bcm, 0x0815, backup_phy[5]);
+	if (phy->rev != 1) {
+		bcm43xx_phy_write(bcm, 0x0814, backup_phy[4]);
+		bcm43xx_phy_write(bcm, 0x0815, backup_phy[5]);
+	}
 	bcm43xx_phy_write(bcm, 0x005A, backup_phy[6]);
 	bcm43xx_phy_write(bcm, 0x0059, backup_phy[7]);
 	bcm43xx_phy_write(bcm, 0x0058, backup_phy[8]);
@@ -1188,24 +1196,23 @@ static void bcm43xx_phy_initg(struct bcm43xx_private *bcm)
 		bcm43xx_phy_write(bcm, 0x0811, 0x0000);
 		bcm43xx_phy_write(bcm, 0x0015, 0x00C0);
 	}
-	if (phy->rev >= 3) {
+	if (phy->rev > 5) {
 		bcm43xx_phy_write(bcm, 0x0811, 0x0400);
 		bcm43xx_phy_write(bcm, 0x0015, 0x00C0);
 	}
 	if (phy->rev >= 2 && phy->connected) {
 		tmp = bcm43xx_phy_read(bcm, 0x0400) & 0xFF;
-		if (tmp < 6) {
+		if (tmp ==3 || tmp == 5) {
 			bcm43xx_phy_write(bcm, 0x04C2, 0x1816);
 			bcm43xx_phy_write(bcm, 0x04C3, 0x8006);
-			if (tmp != 3) {
+			if (tmp == 5) {
 				bcm43xx_phy_write(bcm, 0x04CC,
 						  (bcm43xx_phy_read(bcm, 0x04CC)
 						   & 0x00FF) | 0x1F00);
 			}
 		}
-	}
-	if (phy->rev < 3 && phy->connected)
 		bcm43xx_phy_write(bcm, 0x047E, 0x0078);
+	}
 	if (radio->revision == 8) {
 		bcm43xx_phy_write(bcm, 0x0801, bcm43xx_phy_read(bcm, 0x0801) | 0x0080);
 		bcm43xx_phy_write(bcm, 0x043E, bcm43xx_phy_read(bcm, 0x043E) | 0x0004);
@@ -1232,7 +1239,7 @@ static void bcm43xx_phy_initg(struct bcm43xx_private *bcm)
 		if (phy->rev >= 6) {
 			bcm43xx_phy_write(bcm, 0x0036,
 					  (bcm43xx_phy_read(bcm, 0x0036)
-					   & 0xF000) | (radio->txctl2 << 12));
+					   & 0x0FFF) | (radio->txctl2 << 12));
 		}
 		if (bcm->sprom.boardflags & BCM43xx_BFL_PACTRL)
 			bcm43xx_phy_write(bcm, 0x002E, 0x8075);
@@ -1243,7 +1250,7 @@ static void bcm43xx_phy_initg(struct bcm43xx_private *bcm)
 		else
 			bcm43xx_phy_write(bcm, 0x002F, 0x0202);
 	}
-	if (phy->connected) {
+	if (phy->connected || phy->rev >= 2) {
 		bcm43xx_phy_lo_adjust(bcm, 0);
 		bcm43xx_phy_write(bcm, 0x080F, 0x8078);
 	}
@@ -1257,7 +1264,7 @@ static void bcm43xx_phy_initg(struct bcm43xx_private *bcm)
 		 */
 		bcm43xx_nrssi_hw_update(bcm, 0xFFFF);
 		bcm43xx_calc_nrssi_threshold(bcm);
-	} else if (phy->connected) {
+	} else if (phy->connected || phy->rev >= 2) {
 		if (radio->nrssi[0] == -1000) {
 			assert(radio->nrssi[1] == -1000);
 			bcm43xx_calc_nrssi_slope(bcm);
-- 
cgit v1.2.3


From e5b9ddd9a0f95e133db7b43d05978f24cd6f1369 Mon Sep 17 00:00:00 2001
From: Stephen Hemminger <shemminger@linux-foundation.org>
Date: Sat, 7 Apr 2007 16:02:25 -0700
Subject: skge: turn carrier off when down

Driver needs to turn off carrier when down, otherwise it can
confuse bonding and bridging and looks like carrier is on immediately
when it is brought back up.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/net/skge.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/skge.c b/drivers/net/skge.c
index 39c6677dff5..cc907a1a5ec 100644
--- a/drivers/net/skge.c
+++ b/drivers/net/skge.c
@@ -2535,6 +2535,7 @@ static int skge_down(struct net_device *dev)
 		printk(KERN_INFO PFX "%s: disabling interface\n", dev->name);
 
 	netif_stop_queue(dev);
+	netif_carrier_off(dev);
 	if (hw->chip_id == CHIP_ID_GENESIS && hw->phy_type == SK_PHY_XMAC)
 		del_timer_sync(&skge->link_timer);
 
-- 
cgit v1.2.3


From 9a87240c67565578a9533101b930ef4a975be333 Mon Sep 17 00:00:00 2001
From: Stephen Hemminger <shemminger@linux-foundation.org>
Date: Sat, 7 Apr 2007 16:02:26 -0700
Subject: sky2: turn carrier off when down

Driver needs to turn off carrier when down.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/net/sky2.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index ab0ab92583f..45c4525a46e 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -1561,6 +1561,7 @@ static int sky2_down(struct net_device *dev)
 
 	/* Stop more packets from being queued */
 	netif_stop_queue(dev);
+	netif_carrier_off(dev);
 
 	/* Disable port IRQ */
 	imask = sky2_read32(hw, B0_IMSK);
-- 
cgit v1.2.3


From 1ad5b4a5c224c5f98f9745adbcf99899624c8138 Mon Sep 17 00:00:00 2001
From: Stephen Hemminger <shemminger@linux-foundation.org>
Date: Sat, 7 Apr 2007 16:02:27 -0700
Subject: sky2: turn on clocks when doing resume

Some of these chips are disabled until clock is enabled.
This fixes:
     http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=404107

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/net/sky2.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 45c4525a46e..b636b8a55ff 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -3770,6 +3770,11 @@ static int sky2_resume(struct pci_dev *pdev)
 		goto out;
 
 	pci_enable_wake(pdev, PCI_D0, 0);
+
+	/* Re-enable all clocks */
+	if (hw->chip_id == CHIP_ID_YUKON_EX || hw->chip_id == CHIP_ID_YUKON_EC_U)
+		sky2_pci_write32(hw, PCI_DEV_REG3, 0);
+
 	sky2_reset(hw);
 
 	sky2_write32(hw, B0_IMSK, Y2_IS_BASE);
-- 
cgit v1.2.3


From 9467a8fc89844ff2ea9c6d13460dddb3b674cc37 Mon Sep 17 00:00:00 2001
From: Stephen Hemminger <shemminger@linux-foundation.org>
Date: Sat, 7 Apr 2007 16:02:28 -0700
Subject: sky2: phy workarounds for Yukon EC-U A1

The workaround Yukon EC-U wasn't comparing with correct
version and wasn't doing correct setup. Without it, 88e8056
throws all sorts of errors.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/net/sky2.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index b636b8a55ff..4a009b7b177 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -510,9 +510,9 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
 		ledover &= ~PHY_M_LED_MO_RX;
 	}
 
-	if (hw->chip_id == CHIP_ID_YUKON_EC_U && hw->chip_rev == CHIP_REV_YU_EC_A1) {
+	if (hw->chip_id == CHIP_ID_YUKON_EC_U &&
+	    hw->chip_rev == CHIP_REV_YU_EC_U_A1) {
 		/* apply fixes in PHY AFE */
-		pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
 		gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 255);
 
 		/* increase differential signal amplitude in 10BASE-T */
@@ -524,7 +524,7 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
 		gm_phy_write(hw, port, 0x17, 0x2002);
 
 		/* set page register to 0 */
-		gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
+		gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0);
 	} else if (hw->chip_id != CHIP_ID_YUKON_EX) {
 		gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl);
 
-- 
cgit v1.2.3


From 692412b31ffb5df00197ea591dd635fc07506c02 Mon Sep 17 00:00:00 2001
From: Stephen Hemminger <shemminger@linux-foundation.org>
Date: Mon, 9 Apr 2007 15:32:45 -0700
Subject: skge: fix wake on lan

Need to rework wake on lan code to setup properly and get activated
on shutdown (and suspend), not when ethtool is run.

This does not need to go to stable queue because wake on lan
was not even included in 2.6.20 (or earlier versions).

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/net/skge.c | 94 +++++++++++++++++++++++++++++++++---------------------
 1 file changed, 58 insertions(+), 36 deletions(-)

diff --git a/drivers/net/skge.c b/drivers/net/skge.c
index cc907a1a5ec..d476a3cc2e9 100644
--- a/drivers/net/skge.c
+++ b/drivers/net/skge.c
@@ -163,27 +163,46 @@ static void skge_wol_init(struct skge_port *skge)
 {
 	struct skge_hw *hw = skge->hw;
 	int port = skge->port;
-	enum pause_control save_mode;
-	u32 ctrl;
+	u16 ctrl;
 
-	/* Bring hardware out of reset */
 	skge_write16(hw, B0_CTST, CS_RST_CLR);
 	skge_write16(hw, SK_REG(port, GMAC_LINK_CTRL), GMLC_RST_CLR);
 
-	skge_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_CLR);
-	skge_write8(hw, SK_REG(port, GMAC_CTRL), GMC_RST_CLR);
+	/* Turn on Vaux */
+	skge_write8(hw, B0_POWER_CTRL,
+		    PC_VAUX_ENA | PC_VCC_ENA | PC_VAUX_ON | PC_VCC_OFF);
 
-	/* Force to 10/100 skge_reset will re-enable on resume	 */
-	save_mode = skge->flow_control;
-	skge->flow_control = FLOW_MODE_SYMMETRIC;
+	/* WA code for COMA mode -- clear PHY reset */
+	if (hw->chip_id == CHIP_ID_YUKON_LITE &&
+	    hw->chip_rev >= CHIP_REV_YU_LITE_A3) {
+		u32 reg = skge_read32(hw, B2_GP_IO);
+		reg |= GP_DIR_9;
+		reg &= ~GP_IO_9;
+		skge_write32(hw, B2_GP_IO, reg);
+	}
 
-	ctrl = skge->advertising;
-	skge->advertising &= ~(ADVERTISED_1000baseT_Half|ADVERTISED_1000baseT_Full);
+	skge_write32(hw, SK_REG(port, GPHY_CTRL),
+		     GPC_DIS_SLEEP |
+		     GPC_HWCFG_M_3 | GPC_HWCFG_M_2 | GPC_HWCFG_M_1 | GPC_HWCFG_M_0 |
+		     GPC_ANEG_1 | GPC_RST_SET);
 
-	skge_phy_reset(skge);
+	skge_write32(hw, SK_REG(port, GPHY_CTRL),
+		     GPC_DIS_SLEEP |
+		     GPC_HWCFG_M_3 | GPC_HWCFG_M_2 | GPC_HWCFG_M_1 | GPC_HWCFG_M_0 |
+		     GPC_ANEG_1 | GPC_RST_CLR);
+
+	skge_write32(hw, SK_REG(port, GMAC_CTRL), GMC_RST_CLR);
+
+	/* Force to 10/100 skge_reset will re-enable on resume	 */
+	gm_phy_write(hw, port, PHY_MARV_AUNE_ADV,
+		     PHY_AN_100FULL | PHY_AN_100HALF |
+		     PHY_AN_10FULL | PHY_AN_10HALF| PHY_AN_CSMA);
+	/* no 1000 HD/FD */
+	gm_phy_write(hw, port, PHY_MARV_1000T_CTRL, 0);
+	gm_phy_write(hw, port, PHY_MARV_CTRL,
+		     PHY_CT_RESET | PHY_CT_SPS_LSB | PHY_CT_ANE |
+		     PHY_CT_RE_CFG | PHY_CT_DUP_MD);
 
-	skge->flow_control = save_mode;
-	skge->advertising = ctrl;
 
 	/* Set GMAC to no flow control and auto update for speed/duplex */
 	gma_write16(hw, port, GM_GP_CTRL,
@@ -227,12 +246,10 @@ static int skge_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
 	struct skge_port *skge = netdev_priv(dev);
 	struct skge_hw *hw = skge->hw;
 
-	if (wol->wolopts & wol_supported(hw))
+	if (wol->wolopts & ~wol_supported(hw))
 		return -EOPNOTSUPP;
 
 	skge->wol = wol->wolopts;
-	if (!netif_running(dev))
-		skge_wol_init(skge);
 	return 0;
 }
 
@@ -2535,11 +2552,12 @@ static int skge_down(struct net_device *dev)
 		printk(KERN_INFO PFX "%s: disabling interface\n", dev->name);
 
 	netif_stop_queue(dev);
-	netif_carrier_off(dev);
+
 	if (hw->chip_id == CHIP_ID_GENESIS && hw->phy_type == SK_PHY_XMAC)
 		del_timer_sync(&skge->link_timer);
 
 	netif_poll_disable(dev);
+	netif_carrier_off(dev);
 
 	spin_lock_irq(&hw->hw_lock);
 	hw->intr_mask &= ~portmask[port];
@@ -3766,21 +3784,6 @@ static void __devexit skge_remove(struct pci_dev *pdev)
 }
 
 #ifdef CONFIG_PM
-static int vaux_avail(struct pci_dev *pdev)
-{
-	int pm_cap;
-
-	pm_cap = pci_find_capability(pdev, PCI_CAP_ID_PM);
-	if (pm_cap) {
-		u16 ctl;
-		pci_read_config_word(pdev, pm_cap + PCI_PM_PMC, &ctl);
-		if (ctl & PCI_PM_CAP_AUX_POWER)
-			return 1;
-	}
-	return 0;
-}
-
-
 static int skge_suspend(struct pci_dev *pdev, pm_message_t state)
 {
 	struct skge_hw *hw  = pci_get_drvdata(pdev);
@@ -3802,10 +3805,6 @@ static int skge_suspend(struct pci_dev *pdev, pm_message_t state)
 		wol |= skge->wol;
 	}
 
-	if (wol && vaux_avail(pdev))
-		skge_write8(hw, B0_POWER_CTRL,
-			    PC_VAUX_ENA | PC_VCC_ENA | PC_VAUX_ON | PC_VCC_OFF);
-
 	skge_write32(hw, B0_IMSK, 0);
 	pci_enable_wake(pdev, pci_choose_state(pdev, state), wol);
 	pci_set_power_state(pdev, pci_choose_state(pdev, state));
@@ -3851,6 +3850,28 @@ out:
 }
 #endif
 
+static void skge_shutdown(struct pci_dev *pdev)
+{
+	struct skge_hw *hw  = pci_get_drvdata(pdev);
+	int i, wol = 0;
+
+	for (i = 0; i < hw->ports; i++) {
+		struct net_device *dev = hw->dev[i];
+		struct skge_port *skge = netdev_priv(dev);
+
+		if (skge->wol)
+			skge_wol_init(skge);
+		wol |= skge->wol;
+	}
+
+	pci_enable_wake(pdev, PCI_D3hot, wol);
+	pci_enable_wake(pdev, PCI_D3cold, wol);
+
+	pci_disable_device(pdev);
+	pci_set_power_state(pdev, PCI_D3hot);
+
+}
+
 static struct pci_driver skge_driver = {
 	.name =         DRV_NAME,
 	.id_table =     skge_id_table,
@@ -3860,6 +3881,7 @@ static struct pci_driver skge_driver = {
 	.suspend = 	skge_suspend,
 	.resume = 	skge_resume,
 #endif
+	.shutdown =	skge_shutdown,
 };
 
 static int __init skge_init_module(void)
-- 
cgit v1.2.3


From f2d961c9827bab4b64a1b4ea30c68cf5ab2b2330 Mon Sep 17 00:00:00 2001
From: Divy Le Ray <divy@chelsio.com>
Date: Mon, 9 Apr 2007 20:10:22 -0700
Subject: cxgb3 - avoid deadlock with mac watchdog

Fix a deadlock when the interface s configured down and
the watchdog tack is sleeping on rtnl_lock.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/net/cxgb3/cxgb3_main.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/cxgb3/cxgb3_main.c b/drivers/net/cxgb3/cxgb3_main.c
index 26240fd5e76..c6ebe25464c 100644
--- a/drivers/net/cxgb3/cxgb3_main.c
+++ b/drivers/net/cxgb3/cxgb3_main.c
@@ -2119,7 +2119,9 @@ static void check_t3b2_mac(struct adapter *adapter)
 {
 	int i;
 
-	rtnl_lock();                      /* synchronize with ifdown */
+	if (!rtnl_trylock())	/* synchronize with ifdown */
+		return;
+
 	for_each_port(adapter, i) {
 		struct net_device *dev = adapter->port[i];
 		struct port_info *p = netdev_priv(dev);
-- 
cgit v1.2.3


From 59cf81076a85e1df273155298c462574b49cc0fe Mon Sep 17 00:00:00 2001
From: Divy Le Ray <divy@chelsio.com>
Date: Mon, 9 Apr 2007 20:10:27 -0700
Subject: cxgb3 - MAC watchdog update

The MAC watchdog was failing if the peer interface was brought down.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/net/cxgb3/common.h     |   7 ++-
 drivers/net/cxgb3/cxgb3_main.c |  10 ++--
 drivers/net/cxgb3/xgmac.c      | 107 ++++++++++++++++++++++++++++++-----------
 3 files changed, 89 insertions(+), 35 deletions(-)

diff --git a/drivers/net/cxgb3/common.h b/drivers/net/cxgb3/common.h
index 97128d88eae..8d137963369 100644
--- a/drivers/net/cxgb3/common.h
+++ b/drivers/net/cxgb3/common.h
@@ -478,8 +478,11 @@ struct cmac {
 	struct adapter *adapter;
 	unsigned int offset;
 	unsigned int nucast;	/* # of address filters for unicast MACs */
-	unsigned int tcnt;
-	unsigned int xcnt;
+	unsigned int tx_tcnt;
+	unsigned int tx_xcnt;
+	u64 tx_mcnt;
+	unsigned int rx_xcnt;
+	u64 rx_mcnt;
 	unsigned int toggle_cnt;
 	unsigned int txen;
 	struct mac_stats stats;
diff --git a/drivers/net/cxgb3/cxgb3_main.c b/drivers/net/cxgb3/cxgb3_main.c
index c6ebe25464c..d6eb9824a10 100644
--- a/drivers/net/cxgb3/cxgb3_main.c
+++ b/drivers/net/cxgb3/cxgb3_main.c
@@ -194,15 +194,13 @@ void t3_os_link_changed(struct adapter *adapter, int port_id, int link_stat,
 
 	if (link_stat != netif_carrier_ok(dev)) {
 		if (link_stat) {
-			t3_set_reg_field(adapter,
-					 A_XGM_TXFIFO_CFG + mac->offset,
-					 F_ENDROPPKT, 0);
+			t3_mac_enable(mac, MAC_DIRECTION_RX);
 			netif_carrier_on(dev);
 		} else {
 			netif_carrier_off(dev);
-			t3_set_reg_field(adapter,
-					 A_XGM_TXFIFO_CFG + mac->offset,
-					 F_ENDROPPKT, F_ENDROPPKT);
+			pi->phy.ops->power_down(&pi->phy, 1);
+			t3_mac_disable(mac, MAC_DIRECTION_RX);
+			t3_link_start(&pi->phy, mac, &pi->link_config);
 		}
 
 		link_report(dev);
diff --git a/drivers/net/cxgb3/xgmac.c b/drivers/net/cxgb3/xgmac.c
index 94aaff005a3..a506792f957 100644
--- a/drivers/net/cxgb3/xgmac.c
+++ b/drivers/net/cxgb3/xgmac.c
@@ -367,7 +367,8 @@ int t3_mac_enable(struct cmac *mac, int which)
 	int idx = macidx(mac);
 	struct adapter *adap = mac->adapter;
 	unsigned int oft = mac->offset;
-
+	struct mac_stats *s = &mac->stats;
+	
 	if (which & MAC_DIRECTION_TX) {
 		t3_write_reg(adap, A_XGM_TX_CTRL + oft, F_TXEN);
 		t3_write_reg(adap, A_TP_PIO_ADDR, A_TP_TX_DROP_CFG_CH0 + idx);
@@ -376,10 +377,16 @@ int t3_mac_enable(struct cmac *mac, int which)
 		t3_set_reg_field(adap, A_TP_PIO_DATA, 1 << idx, 1 << idx);
 
 		t3_write_reg(adap, A_TP_PIO_ADDR, A_TP_TX_DROP_CNT_CH0 + idx);
-		mac->tcnt = (G_TXDROPCNTCH0RCVD(t3_read_reg(adap,
-							    A_TP_PIO_DATA)));
-		mac->xcnt = (G_TXSPI4SOPCNT(t3_read_reg(adap,
-						A_XGM_TX_SPI4_SOP_EOP_CNT)));
+		mac->tx_mcnt = s->tx_frames;
+		mac->tx_tcnt = (G_TXDROPCNTCH0RCVD(t3_read_reg(adap,
+							A_TP_PIO_DATA)));
+		mac->tx_xcnt = (G_TXSPI4SOPCNT(t3_read_reg(adap,
+						A_XGM_TX_SPI4_SOP_EOP_CNT +
+						oft)));
+		mac->rx_mcnt = s->rx_frames;
+		mac->rx_xcnt = (G_TXSPI4SOPCNT(t3_read_reg(adap,
+						A_XGM_RX_SPI4_SOP_EOP_CNT +
+						oft)));
 		mac->txen = F_TXEN;
 		mac->toggle_cnt = 0;
 	}
@@ -392,6 +399,7 @@ int t3_mac_disable(struct cmac *mac, int which)
 {
 	int idx = macidx(mac);
 	struct adapter *adap = mac->adapter;
+	int val;
 
 	if (which & MAC_DIRECTION_TX) {
 		t3_write_reg(adap, A_XGM_TX_CTRL + mac->offset, 0);
@@ -401,44 +409,89 @@ int t3_mac_disable(struct cmac *mac, int which)
 		t3_set_reg_field(adap, A_TP_PIO_DATA, 1 << idx, 1 << idx);
 		mac->txen = 0;
 	}
-	if (which & MAC_DIRECTION_RX)
+	if (which & MAC_DIRECTION_RX) {
+		t3_set_reg_field(mac->adapter, A_XGM_RESET_CTRL + mac->offset,
+				 F_PCS_RESET_, 0);
+		msleep(100);
 		t3_write_reg(adap, A_XGM_RX_CTRL + mac->offset, 0);
+		val = F_MAC_RESET_;
+		if (is_10G(adap))
+			val |= F_PCS_RESET_;
+		else if (uses_xaui(adap))
+			val |= F_PCS_RESET_ | F_XG2G_RESET_;
+		else
+			val |= F_RGMII_RESET_ | F_XG2G_RESET_;
+		t3_write_reg(mac->adapter, A_XGM_RESET_CTRL + mac->offset, val);
+	}
 	return 0;
 }
 
 int t3b2_mac_watchdog_task(struct cmac *mac)
 {
 	struct adapter *adap = mac->adapter;
-	unsigned int tcnt, xcnt;
+	struct mac_stats *s = &mac->stats;
+	unsigned int tx_tcnt, tx_xcnt;
+	unsigned int tx_mcnt = s->tx_frames;
+	unsigned int rx_mcnt = s->rx_frames;
+	unsigned int rx_xcnt;
 	int status;
 
-	t3_write_reg(adap, A_TP_PIO_ADDR, A_TP_TX_DROP_CNT_CH0 + macidx(mac));
-	tcnt = (G_TXDROPCNTCH0RCVD(t3_read_reg(adap, A_TP_PIO_DATA)));
-	xcnt = (G_TXSPI4SOPCNT(t3_read_reg(adap, 
-					   A_XGM_TX_SPI4_SOP_EOP_CNT +
-					   mac->offset)));
-
-	if (tcnt != mac->tcnt && xcnt == 0 && mac->xcnt == 0) {
-		if (mac->toggle_cnt > 4) {
-			t3b2_mac_reset(mac);
+	if (tx_mcnt == mac->tx_mcnt) {
+		tx_xcnt = (G_TXSPI4SOPCNT(t3_read_reg(adap,
+						A_XGM_TX_SPI4_SOP_EOP_CNT +
+					       	mac->offset)));
+		if (tx_xcnt == 0) {
+			t3_write_reg(adap, A_TP_PIO_ADDR,
+				     A_TP_TX_DROP_CNT_CH0 + macidx(mac));
+			tx_tcnt = (G_TXDROPCNTCH0RCVD(t3_read_reg(adap,
+						      A_TP_PIO_DATA)));
+		} else {
 			mac->toggle_cnt = 0;
+			return 0;
+		}
+	} else {
+		mac->toggle_cnt = 0;
+		return 0;
+	}
+
+	if (((tx_tcnt != mac->tx_tcnt) &&
+	     (tx_xcnt == 0) && (mac->tx_xcnt == 0)) ||
+	    ((mac->tx_mcnt == tx_mcnt) &&
+	     (tx_xcnt != 0) && (mac->tx_xcnt != 0))) {
+		if (mac->toggle_cnt > 4)
 			status = 2;
-		} else {
-			t3_write_reg(adap, A_XGM_TX_CTRL + mac->offset, 0);
-			t3_read_reg(adap, A_XGM_TX_CTRL + mac->offset);
-			t3_write_reg(adap, A_XGM_TX_CTRL + mac->offset,
-				     mac->txen);
-			t3_read_reg(adap, A_XGM_TX_CTRL + mac->offset);
-			mac->toggle_cnt++;
+		else 
 			status = 1;
-		}	
 	} else {
 		mac->toggle_cnt = 0;
-		status = 0;
+		return 0;
 	}
-	mac->tcnt = tcnt;
-	mac->xcnt = xcnt;
 
+	if (rx_mcnt != mac->rx_mcnt)
+		rx_xcnt = (G_TXSPI4SOPCNT(t3_read_reg(adap,
+						A_XGM_RX_SPI4_SOP_EOP_CNT +
+						mac->offset)));
+	else 
+		return 0;
+
+	if (mac->rx_mcnt != s->rx_frames && rx_xcnt == 0 && mac->rx_xcnt == 0) 
+		status = 2;
+	
+	mac->tx_tcnt = tx_tcnt;
+	mac->tx_xcnt = tx_xcnt;
+	mac->tx_mcnt = s->tx_frames;
+	mac->rx_xcnt = rx_xcnt;
+	mac->rx_mcnt = s->rx_frames;
+	if (status == 1) {
+		t3_write_reg(adap, A_XGM_TX_CTRL + mac->offset, 0);
+		t3_read_reg(adap, A_XGM_TX_CTRL + mac->offset);  /* flush */
+		t3_write_reg(adap, A_XGM_TX_CTRL + mac->offset, mac->txen);
+		t3_read_reg(adap, A_XGM_TX_CTRL + mac->offset);  /* flush */
+		mac->toggle_cnt++;
+	} else if (status == 2) {
+		t3b2_mac_reset(mac);
+		mac->toggle_cnt = 0;
+	}
 	return status;
 }
 
-- 
cgit v1.2.3


From 6cdbd77e8883aac2e24f8b19b91e5b1c839213a0 Mon Sep 17 00:00:00 2001
From: Divy Le Ray <divy@chelsio.com>
Date: Mon, 9 Apr 2007 20:10:33 -0700
Subject: cxgb3 - missing CPL hanler and register setting.

Remove specific CPL handler.
Add missing CPL handler.
Add missing register setting when the interface is brought up.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/net/cxgb3/cxgb3_main.c    |  2 ++
 drivers/net/cxgb3/cxgb3_offload.c | 14 ++------------
 drivers/net/cxgb3/regs.h          |  6 ++++++
 3 files changed, 10 insertions(+), 12 deletions(-)

diff --git a/drivers/net/cxgb3/cxgb3_main.c b/drivers/net/cxgb3/cxgb3_main.c
index d6eb9824a10..67b4b219d92 100644
--- a/drivers/net/cxgb3/cxgb3_main.c
+++ b/drivers/net/cxgb3/cxgb3_main.c
@@ -770,6 +770,8 @@ static int cxgb_up(struct adapter *adap)
 		if (err)
 			goto out;
 
+		t3_write_reg(adap, A_ULPRX_TDDP_PSZ, V_HPZ0(PAGE_SHIFT - 12));
+		
 		err = setup_sge_qsets(adap);
 		if (err)
 			goto out;
diff --git a/drivers/net/cxgb3/cxgb3_offload.c b/drivers/net/cxgb3/cxgb3_offload.c
index eed7a48e311..48649244673 100644
--- a/drivers/net/cxgb3/cxgb3_offload.c
+++ b/drivers/net/cxgb3/cxgb3_offload.c
@@ -743,17 +743,6 @@ static int do_act_establish(struct t3cdev *dev, struct sk_buff *skb)
 	}
 }
 
-static int do_set_tcb_rpl(struct t3cdev *dev, struct sk_buff *skb)
-{
-	struct cpl_set_tcb_rpl *rpl = cplhdr(skb);
-
-	if (rpl->status != CPL_ERR_NONE)
-		printk(KERN_ERR
-		       "Unexpected SET_TCB_RPL status %u for tid %u\n",
-		       rpl->status, GET_TID(rpl));
-	return CPL_RET_BUF_DONE;
-}
-
 static int do_trace(struct t3cdev *dev, struct sk_buff *skb)
 {
 	struct cpl_trace_pkt *p = cplhdr(skb);
@@ -1215,7 +1204,8 @@ void __init cxgb3_offload_init(void)
 	t3_register_cpl_handler(CPL_CLOSE_CON_RPL, do_hwtid_rpl);
 	t3_register_cpl_handler(CPL_ABORT_REQ_RSS, do_abort_req_rss);
 	t3_register_cpl_handler(CPL_ACT_ESTABLISH, do_act_establish);
-	t3_register_cpl_handler(CPL_SET_TCB_RPL, do_set_tcb_rpl);
+	t3_register_cpl_handler(CPL_SET_TCB_RPL, do_hwtid_rpl);
+	t3_register_cpl_handler(CPL_GET_TCB_RPL, do_hwtid_rpl);
 	t3_register_cpl_handler(CPL_RDMA_TERMINATE, do_term);
 	t3_register_cpl_handler(CPL_RDMA_EC_STATUS, do_hwtid_rpl);
 	t3_register_cpl_handler(CPL_TRACE_PKT, do_trace);
diff --git a/drivers/net/cxgb3/regs.h b/drivers/net/cxgb3/regs.h
index f8be41c5a08..e5a553410e2 100644
--- a/drivers/net/cxgb3/regs.h
+++ b/drivers/net/cxgb3/regs.h
@@ -1234,9 +1234,15 @@
 
 #define A_ULPRX_ISCSI_TAGMASK 0x514
 
+#define S_HPZ0    0
+#define M_HPZ0    0xf
+#define V_HPZ0(x) ((x) << S_HPZ0)
+#define G_HPZ0(x) (((x) >> S_HPZ0) & M_HPZ0)
+
 #define A_ULPRX_TDDP_LLIMIT 0x51c
 
 #define A_ULPRX_TDDP_ULIMIT 0x520
+#define A_ULPRX_TDDP_PSZ 0x528
 
 #define A_ULPRX_STAG_LLIMIT 0x52c
 
-- 
cgit v1.2.3


From ae8509b1876e6e1074edc9846296e80983e30502 Mon Sep 17 00:00:00 2001
From: Brice Goglin <brice@myri.com>
Date: Tue, 10 Apr 2007 21:21:08 +0200
Subject: myri10ge: fix management of the firmware 4KB boundary crossing
 restriction

Simpler way of dealing with the firmware 4KB boundary crossing
restriction for rx buffers.  This fixes a variety of memory
corruption issues when using an "uncommon" MTU with a 16KB
page size.

Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/net/myri10ge/myri10ge.c | 19 ++++++++-----------
 1 file changed, 8 insertions(+), 11 deletions(-)

diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c
index c216e6a5d23..1e7fa2facbe 100644
--- a/drivers/net/myri10ge/myri10ge.c
+++ b/drivers/net/myri10ge/myri10ge.c
@@ -900,19 +900,9 @@ myri10ge_alloc_rx_pages(struct myri10ge_priv *mgp, struct myri10ge_rx_buf *rx,
 	/* try to refill entire ring */
 	while (rx->fill_cnt != (rx->cnt + rx->mask + 1)) {
 		idx = rx->fill_cnt & rx->mask;
-
-		if ((bytes < MYRI10GE_ALLOC_SIZE / 2) &&
-		    (rx->page_offset + bytes <= MYRI10GE_ALLOC_SIZE)) {
+		if (rx->page_offset + bytes <= MYRI10GE_ALLOC_SIZE) {
 			/* we can use part of previous page */
 			get_page(rx->page);
-#if MYRI10GE_ALLOC_SIZE > 4096
-			/* Firmware cannot cross 4K boundary.. */
-			if ((rx->page_offset >> 12) !=
-			    ((rx->page_offset + bytes - 1) >> 12)) {
-				rx->page_offset =
-				    (rx->page_offset + bytes) & ~4095;
-			}
-#endif
 		} else {
 			/* we need a new page */
 			page =
@@ -941,6 +931,13 @@ myri10ge_alloc_rx_pages(struct myri10ge_priv *mgp, struct myri10ge_rx_buf *rx,
 
 		/* start next packet on a cacheline boundary */
 		rx->page_offset += SKB_DATA_ALIGN(bytes);
+
+#if MYRI10GE_ALLOC_SIZE > 4096
+		/* don't cross a 4KB boundary */
+		if ((rx->page_offset >> 12) !=
+		    ((rx->page_offset + bytes - 1) >> 12))
+			rx->page_offset = (rx->page_offset + 4096) & ~4095;
+#endif
 		rx->fill_cnt++;
 
 		/* copy 8 descriptors to the firmware at a time */
-- 
cgit v1.2.3


From f19baaeaadf9d77bcc6c122500c70b27c5bbc7a4 Mon Sep 17 00:00:00 2001
From: Brice Goglin <brice@myri.com>
Date: Tue, 10 Apr 2007 21:21:39 +0200
Subject: myri10ge: more Intel chipsets providing aligned PCIe completions

Add the Intel 5000 southbridge (aka Intel 6310/6311/6321ESB) PCIe ports
and the Intel E30x0 chipsets to the whitelist of aligned PCIe completion.

Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/net/myri10ge/myri10ge.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c
index 1e7fa2facbe..756855930f3 100644
--- a/drivers/net/myri10ge/myri10ge.c
+++ b/drivers/net/myri10ge/myri10ge.c
@@ -2487,6 +2487,10 @@ static void myri10ge_enable_ecrc(struct myri10ge_priv *mgp)
 
 #define PCI_DEVICE_ID_INTEL_E5000_PCIE23 0x25f7
 #define PCI_DEVICE_ID_INTEL_E5000_PCIE47 0x25fa
+#define PCI_DEVICE_ID_INTEL_6300ESB_PCIEE1 0x3510
+#define PCI_DEVICE_ID_INTEL_6300ESB_PCIEE4 0x351b
+#define PCI_DEVICE_ID_INTEL_E3000_PCIE	0x2779
+#define PCI_DEVICE_ID_INTEL_E3010_PCIE	0x277a
 #define PCI_DEVICE_ID_SERVERWORKS_HT2100_PCIE_FIRST 0x140
 #define PCI_DEVICE_ID_SERVERWORKS_HT2100_PCIE_LAST 0x142
 
@@ -2526,6 +2530,18 @@ static void myri10ge_select_firmware(struct myri10ge_priv *mgp)
 				PCI_DEVICE_ID_SERVERWORKS_HT2100_PCIE_FIRST
 				&& bridge->device <=
 				PCI_DEVICE_ID_SERVERWORKS_HT2100_PCIE_LAST)
+			    /* All Intel E3000/E3010 PCIE ports */
+			    || (bridge->vendor == PCI_VENDOR_ID_INTEL
+				&& (bridge->device ==
+				    PCI_DEVICE_ID_INTEL_E3000_PCIE
+				    || bridge->device ==
+				    PCI_DEVICE_ID_INTEL_E3010_PCIE))
+			    /* All Intel 6310/6311/6321ESB PCIE ports */
+			    || (bridge->vendor == PCI_VENDOR_ID_INTEL
+				&& bridge->device >=
+				PCI_DEVICE_ID_INTEL_6300ESB_PCIEE1
+				&& bridge->device <=
+				PCI_DEVICE_ID_INTEL_6300ESB_PCIEE4)
 			    /* All Intel E5000 PCIE ports */
 			    || (bridge->vendor == PCI_VENDOR_ID_INTEL
 				&& bridge->device >=
-- 
cgit v1.2.3


From 4b2281c7aa6a6e2615b35f8cebd93656dc6d714c Mon Sep 17 00:00:00 2001
From: Brice Goglin <brice@myri.com>
Date: Tue, 10 Apr 2007 21:22:19 +0200
Subject: myri10ge: update driver version to 1.3.0-1.233

Update the myri10ge driver version number to 1.3.0-1.233.

Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---
 drivers/net/myri10ge/myri10ge.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c
index 756855930f3..f8efe0e70a6 100644
--- a/drivers/net/myri10ge/myri10ge.c
+++ b/drivers/net/myri10ge/myri10ge.c
@@ -71,7 +71,7 @@
 #include "myri10ge_mcp.h"
 #include "myri10ge_mcp_gen_header.h"
 
-#define MYRI10GE_VERSION_STR "1.3.0-1.227"
+#define MYRI10GE_VERSION_STR "1.3.0-1.233"
 
 MODULE_DESCRIPTION("Myricom 10G driver (10GbE)");
 MODULE_AUTHOR("Maintainer: help@myri.com");
-- 
cgit v1.2.3