From 76f58584824c61eb5b3bdbf019236815921d2e7c Mon Sep 17 00:00:00 2001 From: Len Brown Date: Wed, 24 Aug 2005 12:10:49 -0400 Subject: [ACPI] delete CONFIG_ACPI_BUS it is a synonym for CONFIG_ACPI Signed-off-by: Len Brown --- arch/i386/defconfig | 1 - arch/i386/kernel/acpi/boot.c | 6 ------ arch/i386/kernel/mpparse.c | 4 ---- arch/ia64/configs/bigsur_defconfig | 1 - arch/ia64/configs/sn2_defconfig | 1 - arch/ia64/configs/tiger_defconfig | 1 - arch/ia64/configs/zx1_defconfig | 1 - arch/ia64/defconfig | 1 - arch/x86_64/defconfig | 1 - arch/x86_64/kernel/genapic.c | 4 ++-- arch/x86_64/kernel/mpparse.c | 4 ---- drivers/acpi/Kconfig | 4 ---- drivers/acpi/Makefile | 6 +++--- drivers/char/tpm/Kconfig | 2 +- drivers/pci/hotplug/Kconfig | 4 ++-- drivers/pci/hotplug/Makefile | 4 ++-- drivers/pnp/Kconfig | 2 +- drivers/pnp/pnpacpi/Kconfig | 2 +- drivers/serial/Kconfig | 2 +- include/acpi/acpi_bus.h | 4 ++-- 20 files changed, 15 insertions(+), 40 deletions(-) diff --git a/arch/i386/defconfig b/arch/i386/defconfig index f137a32634a..1a387856c87 100644 --- a/arch/i386/defconfig +++ b/arch/i386/defconfig @@ -142,7 +142,6 @@ CONFIG_ACPI_THERMAL=y # CONFIG_ACPI_ASUS is not set # CONFIG_ACPI_TOSHIBA is not set # CONFIG_ACPI_DEBUG is not set -CONFIG_ACPI_BUS=y CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_PCI=y diff --git a/arch/i386/kernel/acpi/boot.c b/arch/i386/kernel/acpi/boot.c index 84befaecedf..552fc85691a 100644 --- a/arch/i386/kernel/acpi/boot.c +++ b/arch/i386/kernel/acpi/boot.c @@ -408,8 +408,6 @@ acpi_parse_nmi_src(acpi_table_entry_header * header, const unsigned long end) #endif /* CONFIG_X86_IO_APIC */ -#ifdef CONFIG_ACPI_BUS - /* * acpi_pic_sci_set_trigger() * @@ -460,8 +458,6 @@ void __init acpi_pic_sci_set_trigger(unsigned int irq, u16 trigger) outb(new >> 8, 0x4d1); } -#endif /* CONFIG_ACPI_BUS */ - int acpi_gsi_to_irq(u32 gsi, unsigned int *irq) { #ifdef CONFIG_X86_IO_APIC @@ -637,12 +633,10 @@ static int __init acpi_parse_fadt(unsigned long phys, unsigned long size) /* initialize sci_int early for INT_SRC_OVR MADT parsing */ acpi_fadt.sci_int = fadt->sci_int; -#ifdef CONFIG_ACPI_BUS /* initialize rev and apic_phys_dest_mode for x86_64 genapic */ acpi_fadt.revision = fadt->revision; acpi_fadt.force_apic_physical_destination_mode = fadt->force_apic_physical_destination_mode; -#endif #ifdef CONFIG_X86_PM_TIMER /* detect the location of the ACPI PM Timer */ diff --git a/arch/i386/kernel/mpparse.c b/arch/i386/kernel/mpparse.c index db90d141481..97dbf289dbd 100644 --- a/arch/i386/kernel/mpparse.c +++ b/arch/i386/kernel/mpparse.c @@ -1069,11 +1069,9 @@ int mp_register_gsi (u32 gsi, int edge_level, int active_high_low) */ static int gsi_to_irq[MAX_GSI_NUM]; -#ifdef CONFIG_ACPI_BUS /* Don't set up the ACPI SCI because it's already set up */ if (acpi_fadt.sci_int == gsi) return gsi; -#endif ioapic = mp_find_ioapic(gsi); if (ioapic < 0) { @@ -1116,13 +1114,11 @@ int mp_register_gsi (u32 gsi, int edge_level, int active_high_low) if (gsi < MAX_GSI_NUM) { if (gsi > 15) gsi = pci_irq++; -#ifdef CONFIG_ACPI_BUS /* * Don't assign IRQ used by ACPI SCI */ if (gsi == acpi_fadt.sci_int) gsi = pci_irq++; -#endif gsi_to_irq[irq] = gsi; } else { printk(KERN_ERR "GSI %u is too high\n", gsi); diff --git a/arch/ia64/configs/bigsur_defconfig b/arch/ia64/configs/bigsur_defconfig index 2c3ba6a6ec7..996144e840d 100644 --- a/arch/ia64/configs/bigsur_defconfig +++ b/arch/ia64/configs/bigsur_defconfig @@ -114,7 +114,6 @@ CONFIG_ACPI_PROCESSOR=m CONFIG_ACPI_THERMAL=m CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set -CONFIG_ACPI_BUS=y CONFIG_ACPI_POWER=y CONFIG_ACPI_PCI=y CONFIG_ACPI_SYSTEM=y diff --git a/arch/ia64/configs/sn2_defconfig b/arch/ia64/configs/sn2_defconfig index 6a0c114e086..4644ebea8ea 100644 --- a/arch/ia64/configs/sn2_defconfig +++ b/arch/ia64/configs/sn2_defconfig @@ -138,7 +138,6 @@ CONFIG_ACPI_HOTKEY=m CONFIG_ACPI_NUMA=y CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set -CONFIG_ACPI_BUS=y CONFIG_ACPI_POWER=y CONFIG_ACPI_PCI=y CONFIG_ACPI_SYSTEM=y diff --git a/arch/ia64/configs/tiger_defconfig b/arch/ia64/configs/tiger_defconfig index dec24a6de6a..f5fa113f302 100644 --- a/arch/ia64/configs/tiger_defconfig +++ b/arch/ia64/configs/tiger_defconfig @@ -137,7 +137,6 @@ CONFIG_ACPI_PROCESSOR=m CONFIG_ACPI_THERMAL=m CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set -CONFIG_ACPI_BUS=y CONFIG_ACPI_POWER=y CONFIG_ACPI_PCI=y CONFIG_ACPI_SYSTEM=y diff --git a/arch/ia64/configs/zx1_defconfig b/arch/ia64/configs/zx1_defconfig index d318087bfcb..1e6d286ad0f 100644 --- a/arch/ia64/configs/zx1_defconfig +++ b/arch/ia64/configs/zx1_defconfig @@ -136,7 +136,6 @@ CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_THERMAL=y CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set -CONFIG_ACPI_BUS=y CONFIG_ACPI_POWER=y CONFIG_ACPI_PCI=y CONFIG_ACPI_SYSTEM=y diff --git a/arch/ia64/defconfig b/arch/ia64/defconfig index e6d34df7d2f..163ef12641b 100644 --- a/arch/ia64/defconfig +++ b/arch/ia64/defconfig @@ -127,7 +127,6 @@ CONFIG_ACPI_THERMAL=m CONFIG_ACPI_NUMA=y CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set -CONFIG_ACPI_BUS=y CONFIG_ACPI_POWER=y CONFIG_ACPI_PCI=y CONFIG_ACPI_SYSTEM=y diff --git a/arch/x86_64/defconfig b/arch/x86_64/defconfig index 8ccb4a12eed..62abdc0adab 100644 --- a/arch/x86_64/defconfig +++ b/arch/x86_64/defconfig @@ -149,7 +149,6 @@ CONFIG_ACPI_NUMA=y CONFIG_ACPI_TOSHIBA=y CONFIG_ACPI_BLACKLIST_YEAR=2001 # CONFIG_ACPI_DEBUG is not set -CONFIG_ACPI_BUS=y CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_PCI=y diff --git a/arch/x86_64/kernel/genapic.c b/arch/x86_64/kernel/genapic.c index 30c843a5efd..f031358906f 100644 --- a/arch/x86_64/kernel/genapic.c +++ b/arch/x86_64/kernel/genapic.c @@ -20,7 +20,7 @@ #include #include -#if defined(CONFIG_ACPI_BUS) +#if defined(CONFIG_ACPI) #include #endif @@ -47,7 +47,7 @@ void __init clustered_apic_check(void) u8 cluster_cnt[NUM_APIC_CLUSTERS]; int num_cpus = 0; -#if defined(CONFIG_ACPI_BUS) +#if defined(CONFIG_ACPI) /* * Some x86_64 machines use physical APIC mode regardless of how many * procs/clusters are present (x86_64 ES7000 is an example). diff --git a/arch/x86_64/kernel/mpparse.c b/arch/x86_64/kernel/mpparse.c index 86445f320d8..8d8ed6ae1d0 100644 --- a/arch/x86_64/kernel/mpparse.c +++ b/arch/x86_64/kernel/mpparse.c @@ -927,11 +927,9 @@ int mp_register_gsi(u32 gsi, int edge_level, int active_high_low) if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC) return gsi; -#ifdef CONFIG_ACPI_BUS /* Don't set up the ACPI SCI because it's already set up */ if (acpi_fadt.sci_int == gsi) return gsi; -#endif ioapic = mp_find_ioapic(gsi); if (ioapic < 0) { @@ -971,13 +969,11 @@ int mp_register_gsi(u32 gsi, int edge_level, int active_high_low) if (gsi < MAX_GSI_NUM) { if (gsi > 15) gsi = pci_irq++; -#ifdef CONFIG_ACPI_BUS /* * Don't assign IRQ used by ACPI SCI */ if (gsi == acpi_fadt.sci_int) gsi = pci_irq++; -#endif gsi_to_irq[irq] = gsi; } else { printk(KERN_ERR "GSI %u is too high\n", gsi); diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index f023a88ca39..8cafa4adcf4 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -267,10 +267,6 @@ config ACPI_DEBUG of verbosity. Saying Y enables these statements. This will increase your kernel size by around 50K. -config ACPI_BUS - bool - default y - config ACPI_EC bool depends on X86 diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile index 060afaf962a..b6a3c919238 100644 --- a/drivers/acpi/Makefile +++ b/drivers/acpi/Makefile @@ -35,8 +35,8 @@ ifdef CONFIG_CPU_FREQ processor-objs += processor_perflib.o endif -obj-$(CONFIG_ACPI_BUS) += sleep/ -obj-$(CONFIG_ACPI_BUS) += bus.o glue.o +obj-y += sleep/ +obj-y += bus.o glue.o obj-$(CONFIG_ACPI_AC) += ac.o obj-$(CONFIG_ACPI_BATTERY) += battery.o obj-$(CONFIG_ACPI_BUTTON) += button.o @@ -55,5 +55,5 @@ obj-$(CONFIG_ACPI_NUMA) += numa.o obj-$(CONFIG_ACPI_ASUS) += asus_acpi.o obj-$(CONFIG_ACPI_IBM) += ibm_acpi.o obj-$(CONFIG_ACPI_TOSHIBA) += toshiba_acpi.o -obj-$(CONFIG_ACPI_BUS) += scan.o motherboard.o +obj-y += scan.o motherboard.o obj-$(CONFIG_ACPI_HOTPLUG_MEMORY) += acpi_memhotplug.o diff --git a/drivers/char/tpm/Kconfig b/drivers/char/tpm/Kconfig index 79e9832ef1f..b58adfe3ed1 100644 --- a/drivers/char/tpm/Kconfig +++ b/drivers/char/tpm/Kconfig @@ -17,7 +17,7 @@ config TCG_TPM obtained at: . To compile this driver as a module, choose M here; the module will be called tpm. If unsure, say N. - Note: For more TPM drivers enable CONFIG_PNP, CONFIG_ACPI_BUS + Note: For more TPM drivers enable CONFIG_PNP, CONFIG_ACPI and CONFIG_PNPACPI. config TCG_NSC diff --git a/drivers/pci/hotplug/Kconfig b/drivers/pci/hotplug/Kconfig index 9c4a39ee89b..2f1289eebb3 100644 --- a/drivers/pci/hotplug/Kconfig +++ b/drivers/pci/hotplug/Kconfig @@ -78,7 +78,7 @@ config HOTPLUG_PCI_IBM config HOTPLUG_PCI_ACPI tristate "ACPI PCI Hotplug driver" - depends on ACPI_BUS && HOTPLUG_PCI + depends on ACPI && HOTPLUG_PCI help Say Y here if you have a system that supports PCI Hotplug using ACPI. @@ -157,7 +157,7 @@ config HOTPLUG_PCI_SHPC_POLL_EVENT_MODE config HOTPLUG_PCI_SHPC_PHPRM_LEGACY bool "For AMD SHPC only: Use $HRT for resource/configuration" - depends on HOTPLUG_PCI_SHPC && !ACPI_BUS + depends on HOTPLUG_PCI_SHPC && !ACPI help Say Y here for AMD SHPC. You have to select this option if you are using this driver on platform with AMD SHPC. diff --git a/drivers/pci/hotplug/Makefile b/drivers/pci/hotplug/Makefile index 31a307004b9..246586a3d91 100644 --- a/drivers/pci/hotplug/Makefile +++ b/drivers/pci/hotplug/Makefile @@ -51,7 +51,7 @@ pciehp-objs := pciehp_core.o \ pciehp_ctrl.o \ pciehp_pci.o \ pciehp_hpc.o -ifdef CONFIG_ACPI_BUS +ifdef CONFIG_ACPI pciehp-objs += pciehprm_acpi.o else pciehp-objs += pciehprm_nonacpi.o @@ -62,7 +62,7 @@ shpchp-objs := shpchp_core.o \ shpchp_pci.o \ shpchp_sysfs.o \ shpchp_hpc.o -ifdef CONFIG_ACPI_BUS +ifdef CONFIG_ACPI shpchp-objs += shpchprm_acpi.o else ifdef CONFIG_HOTPLUG_PCI_SHPC_PHPRM_LEGACY diff --git a/drivers/pnp/Kconfig b/drivers/pnp/Kconfig index 6776308a1fe..c5143201419 100644 --- a/drivers/pnp/Kconfig +++ b/drivers/pnp/Kconfig @@ -6,7 +6,7 @@ menu "Plug and Play support" config PNP bool "Plug and Play support" - depends on ISA || ACPI_BUS + depends on ISA || ACPI ---help--- Plug and Play (PnP) is a standard for peripherals which allows those peripherals to be configured by software, e.g. assign IRQ's or other diff --git a/drivers/pnp/pnpacpi/Kconfig b/drivers/pnp/pnpacpi/Kconfig index 0782cdc5009..b1854171b96 100644 --- a/drivers/pnp/pnpacpi/Kconfig +++ b/drivers/pnp/pnpacpi/Kconfig @@ -3,7 +3,7 @@ # config PNPACPI bool "Plug and Play ACPI support (EXPERIMENTAL)" - depends on PNP && ACPI_BUS && EXPERIMENTAL + depends on PNP && ACPI && EXPERIMENTAL default y ---help--- Linux uses the PNPACPI to autodetect built-in diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 97034d3937f..56de409f486 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -80,7 +80,7 @@ config SERIAL_8250_CS config SERIAL_8250_ACPI bool "8250/16550 device discovery via ACPI namespace" default y if IA64 - depends on ACPI_BUS && SERIAL_8250 + depends on ACPI && SERIAL_8250 ---help--- If you wish to enable serial port discovery via the ACPI namespace, say Y here. If unsure, say N. diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h index 4f4b2baa717..0b54e9a4a8a 100644 --- a/include/acpi/acpi_bus.h +++ b/include/acpi/acpi_bus.h @@ -53,7 +53,7 @@ acpi_evaluate_reference(acpi_handle handle, struct acpi_object_list *arguments, struct acpi_handle_list *list); -#ifdef CONFIG_ACPI_BUS +#ifdef CONFIG_ACPI #include @@ -356,6 +356,6 @@ acpi_handle acpi_get_child(acpi_handle, acpi_integer); acpi_handle acpi_get_pci_rootbridge_handle(unsigned int, unsigned int); #define DEVICE_ACPI_HANDLE(dev) ((acpi_handle)((dev)->firmware_data)) -#endif /*CONFIG_ACPI_BUS */ +#endif /* CONFIG_ACPI */ #endif /*__ACPI_BUS_H__*/ -- cgit v1.2.3