From 499a214ca2765522d6a59ff73825d40e7bb31510 Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Sat, 28 Mar 2009 20:51:58 +0100 Subject: rt2x00: Don't free register information on suspend After suspend & resume the rt2x00 devices won't wakeup anymore due to a broken register information setup. The most important problem is the release of the EEPROM buffer which is completely cleared and never read again after the suspend. Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00pci.c | 18 +----------------- drivers/net/wireless/rt2x00/rt2x00usb.c | 18 +----------------- 2 files changed, 2 insertions(+), 34 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.c b/drivers/net/wireless/rt2x00/rt2x00pci.c index 43fa0f84900..9730b4f8fd2 100644 --- a/drivers/net/wireless/rt2x00/rt2x00pci.c +++ b/drivers/net/wireless/rt2x00/rt2x00pci.c @@ -369,8 +369,6 @@ int rt2x00pci_suspend(struct pci_dev *pci_dev, pm_message_t state) if (retval) return retval; - rt2x00pci_free_reg(rt2x00dev); - pci_save_state(pci_dev); pci_disable_device(pci_dev); return pci_set_power_state(pci_dev, pci_choose_state(pci_dev, state)); @@ -381,7 +379,6 @@ int rt2x00pci_resume(struct pci_dev *pci_dev) { struct ieee80211_hw *hw = pci_get_drvdata(pci_dev); struct rt2x00_dev *rt2x00dev = hw->priv; - int retval; if (pci_set_power_state(pci_dev, PCI_D0) || pci_enable_device(pci_dev) || @@ -390,20 +387,7 @@ int rt2x00pci_resume(struct pci_dev *pci_dev) return -EIO; } - retval = rt2x00pci_alloc_reg(rt2x00dev); - if (retval) - return retval; - - retval = rt2x00lib_resume(rt2x00dev); - if (retval) - goto exit_free_reg; - - return 0; - -exit_free_reg: - rt2x00pci_free_reg(rt2x00dev); - - return retval; + return rt2x00lib_resume(rt2x00dev); } EXPORT_SYMBOL_GPL(rt2x00pci_resume); #endif /* CONFIG_PM */ diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c index 7d50ca82375..501544882c2 100644 --- a/drivers/net/wireless/rt2x00/rt2x00usb.c +++ b/drivers/net/wireless/rt2x00/rt2x00usb.c @@ -702,8 +702,6 @@ int rt2x00usb_suspend(struct usb_interface *usb_intf, pm_message_t state) if (retval) return retval; - rt2x00usb_free_reg(rt2x00dev); - /* * Decrease usbdev refcount. */ @@ -717,24 +715,10 @@ int rt2x00usb_resume(struct usb_interface *usb_intf) { struct ieee80211_hw *hw = usb_get_intfdata(usb_intf); struct rt2x00_dev *rt2x00dev = hw->priv; - int retval; usb_get_dev(interface_to_usbdev(usb_intf)); - retval = rt2x00usb_alloc_reg(rt2x00dev); - if (retval) - return retval; - - retval = rt2x00lib_resume(rt2x00dev); - if (retval) - goto exit_free_reg; - - return 0; - -exit_free_reg: - rt2x00usb_free_reg(rt2x00dev); - - return retval; + return rt2x00lib_resume(rt2x00dev); } EXPORT_SYMBOL_GPL(rt2x00usb_resume); #endif /* CONFIG_PM */ -- cgit v1.2.3 From 125143966f02bd7366eb9040aa74392d19955da8 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Thu, 16 Apr 2009 16:23:26 -0700 Subject: iwl3945-base.c: Add missing space to debug print "not" is not printed without a space after %pM Signed-off-by: Joe Perches Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl3945-base.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index 8d738d75248..da61ecd6288 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -4075,7 +4075,7 @@ static int iwl3945_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, if (!static_key) { sta_id = iwl3945_hw_find_station(priv, addr); if (sta_id == IWL_INVALID_STATION) { - IWL_DEBUG_MAC80211(priv, "leave - %pMnot in station map.\n", + IWL_DEBUG_MAC80211(priv, "leave - %pM not in station map.\n", addr); return -EINVAL; } -- cgit v1.2.3 From c3b93c878d7912a01467890bc0785071c2dc4bc1 Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Fri, 17 Apr 2009 15:14:22 +0200 Subject: p54: deactivate broken powersave function This patch deactivates powersave in station mode. It does not work correctly yet, so the code does more harm than good. Reported-by: Johannes Berg Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville --- drivers/net/wireless/p54/p54common.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c index 0c1b0577d4e..c8f0232ee5e 100644 --- a/drivers/net/wireless/p54/p54common.c +++ b/drivers/net/wireless/p54/p54common.c @@ -2543,8 +2543,6 @@ struct ieee80211_hw *p54_init_common(size_t priv_data_len) priv->basic_rate_mask = 0x15f; skb_queue_head_init(&priv->tx_queue); dev->flags = IEEE80211_HW_RX_INCLUDES_FCS | - IEEE80211_HW_SUPPORTS_PS | - IEEE80211_HW_PS_NULLFUNC_STACK | IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_NOISE_DBM; -- cgit v1.2.3 From 230f7af0d8f6f2019e64920378b3b66e7d3e99a5 Mon Sep 17 00:00:00 2001 From: Joerg Albert Date: Sat, 18 Apr 2009 02:10:45 +0200 Subject: mwl8k: fix module re-insertion bug swap mwl8k_remove and mwl8k_shutdown functions to allow "rmmod mwl8k; modprobe mwl8k" Signed-off-by: Joerg Albert Signed-off-by: John W. Linville --- drivers/net/wireless/mwl8k.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c index 57a0268d1ba..b5dbf6d9e51 100644 --- a/drivers/net/wireless/mwl8k.c +++ b/drivers/net/wireless/mwl8k.c @@ -3720,12 +3720,12 @@ err_free_reg: return rc; } -static void __devexit mwl8k_remove(struct pci_dev *pdev) +static void __devexit mwl8k_shutdown(struct pci_dev *pdev) { printk(KERN_ERR "===>%s(%u)\n", __func__, __LINE__); } -static void __devexit mwl8k_shutdown(struct pci_dev *pdev) +static void __devexit mwl8k_remove(struct pci_dev *pdev) { struct ieee80211_hw *hw = pci_get_drvdata(pdev); struct mwl8k_priv *priv; -- cgit v1.2.3 From 18aaab15f9a9cd4f20dc596aa38408c5e5d208ed Mon Sep 17 00:00:00 2001 From: "Robert P. J. Day" Date: Sat, 18 Apr 2009 09:33:55 -0400 Subject: MAC80211: Remove unused MAC80211_VERBOSE_SPECT_MGMT_DEBUG. Remove this unused Kconfig variable, which Intel apparently once promised to make use of but never did. Signed-off-by: Robert P. J. Day Acked-by: Johannes Berg Signed-off-by: John W. Linville --- net/mac80211/Kconfig | 7 ------- 1 file changed, 7 deletions(-) diff --git a/net/mac80211/Kconfig b/net/mac80211/Kconfig index f3d9ae350fb..ecc3faf9f11 100644 --- a/net/mac80211/Kconfig +++ b/net/mac80211/Kconfig @@ -202,10 +202,3 @@ config MAC80211_DEBUG_COUNTERS and show them in debugfs. If unsure, say N. - -config MAC80211_VERBOSE_SPECT_MGMT_DEBUG - bool "Verbose Spectrum Management (IEEE 802.11h)debugging" - depends on MAC80211_DEBUG_MENU - ---help--- - Say Y here to print out verbose Spectrum Management (IEEE 802.11h) - debug messages. -- cgit v1.2.3 From e10a9dfc35ae6bd62bbb83df08297ea06b54d9ce Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Sat, 18 Apr 2009 17:12:18 +0200 Subject: ar9170usb: fix hang on resume This patch fixes a hang on resume when the filesystem is not available and request_firmware blocks. However, the device does not accept the firmware on resume. and it will exit with: > firmware part 1 upload failed (-71). > device is in a bad state. please reconnect it! Reported-by: Johannes Berg Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville --- drivers/net/wireless/ar9170/usb.c | 110 +++++++++++++++++++++++++++++++------- 1 file changed, 90 insertions(+), 20 deletions(-) diff --git a/drivers/net/wireless/ar9170/usb.c b/drivers/net/wireless/ar9170/usb.c index c9e422ead92..fddda477095 100644 --- a/drivers/net/wireless/ar9170/usb.c +++ b/drivers/net/wireless/ar9170/usb.c @@ -623,6 +623,39 @@ static int ar9170_usb_open(struct ar9170 *ar) return 0; } +static int ar9170_usb_init_device(struct ar9170_usb *aru) +{ + int err; + + err = ar9170_usb_alloc_rx_irq_urb(aru); + if (err) + goto err_out; + + err = ar9170_usb_alloc_rx_bulk_urbs(aru); + if (err) + goto err_unrx; + + err = ar9170_usb_upload_firmware(aru); + if (err) { + err = ar9170_echo_test(&aru->common, 0x60d43110); + if (err) { + /* force user invention, by disabling the device */ + err = usb_driver_set_configuration(aru->udev, -1); + dev_err(&aru->udev->dev, "device is in a bad state. " + "please reconnect it!\n"); + goto err_unrx; + } + } + + return 0; + +err_unrx: + ar9170_usb_cancel_urbs(aru); + +err_out: + return err; +} + static int ar9170_usb_probe(struct usb_interface *intf, const struct usb_device_id *id) { @@ -658,32 +691,16 @@ static int ar9170_usb_probe(struct usb_interface *intf, err = ar9170_usb_reset(aru); if (err) - goto err_unlock; + goto err_freehw; err = ar9170_usb_request_firmware(aru); if (err) - goto err_unlock; + goto err_freehw; - err = ar9170_usb_alloc_rx_irq_urb(aru); + err = ar9170_usb_init_device(aru); if (err) goto err_freefw; - err = ar9170_usb_alloc_rx_bulk_urbs(aru); - if (err) - goto err_unrx; - - err = ar9170_usb_upload_firmware(aru); - if (err) { - err = ar9170_echo_test(&aru->common, 0x60d43110); - if (err) { - /* force user invention, by disabling the device */ - err = usb_driver_set_configuration(aru->udev, -1); - dev_err(&aru->udev->dev, "device is in a bad state. " - "please reconnect it!\n"); - goto err_unrx; - } - } - err = ar9170_usb_open(ar); if (err) goto err_unrx; @@ -703,7 +720,7 @@ err_freefw: release_firmware(aru->init_values); release_firmware(aru->firmware); -err_unlock: +err_freehw: usb_set_intfdata(intf, NULL); usb_put_dev(udev); ieee80211_free_hw(ar->hw); @@ -730,12 +747,65 @@ static void ar9170_usb_disconnect(struct usb_interface *intf) ieee80211_free_hw(aru->common.hw); } +#ifdef CONFIG_PM +static int ar9170_suspend(struct usb_interface *intf, + pm_message_t message) +{ + struct ar9170_usb *aru = usb_get_intfdata(intf); + + if (!aru) + return -ENODEV; + + aru->common.state = AR9170_IDLE; + ar9170_usb_cancel_urbs(aru); + + return 0; +} + +static int ar9170_resume(struct usb_interface *intf) +{ + struct ar9170_usb *aru = usb_get_intfdata(intf); + int err; + + if (!aru) + return -ENODEV; + + usb_unpoison_anchored_urbs(&aru->rx_submitted); + usb_unpoison_anchored_urbs(&aru->tx_submitted); + + /* + * FIXME: firmware upload will fail on resume. + * but this is better than a hang! + */ + + err = ar9170_usb_init_device(aru); + if (err) + goto err_unrx; + + err = ar9170_usb_open(&aru->common); + if (err) + goto err_unrx; + + return 0; + +err_unrx: + aru->common.state = AR9170_IDLE; + ar9170_usb_cancel_urbs(aru); + + return err; +} +#endif /* CONFIG_PM */ + static struct usb_driver ar9170_driver = { .name = "ar9170usb", .probe = ar9170_usb_probe, .disconnect = ar9170_usb_disconnect, .id_table = ar9170_usb_ids, .soft_unbind = 1, +#ifdef CONFIG_PM + .suspend = ar9170_suspend, + .resume = ar9170_resume, +#endif /* CONFIG_PM */ }; static int __init ar9170_init(void) -- cgit v1.2.3 From d91c01c757bd9659ac10549504586fae610265a4 Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Sat, 18 Apr 2009 21:53:15 +0300 Subject: nl80211: Make nl80211_send_mlme_event() atomic One of the code paths sending deauth/disassoc events ends up calling this function with rcu_read_lock held, so we must use GFP_ATOMIC in allocation routines. Reported-by: Johannes Berg Signed-off-by: Jouni Malinen Signed-off-by: John W. Linville --- net/wireless/nl80211.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 353e1a4ece8..2456e4ee445 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -3334,7 +3334,7 @@ static void nl80211_send_mlme_event(struct cfg80211_registered_device *rdev, struct sk_buff *msg; void *hdr; - msg = nlmsg_new(NLMSG_GOODSIZE, GFP_KERNEL); + msg = nlmsg_new(NLMSG_GOODSIZE, GFP_ATOMIC); if (!msg) return; @@ -3353,7 +3353,7 @@ static void nl80211_send_mlme_event(struct cfg80211_registered_device *rdev, return; } - genlmsg_multicast(msg, 0, nl80211_mlme_mcgrp.id, GFP_KERNEL); + genlmsg_multicast(msg, 0, nl80211_mlme_mcgrp.id, GFP_ATOMIC); return; nla_put_failure: -- cgit v1.2.3 From ad935687dbe7307f5abd9e3f610a965a287324a9 Mon Sep 17 00:00:00 2001 From: Kalle Valo Date: Sun, 19 Apr 2009 08:47:19 +0300 Subject: mac80211: fix beacon loss detection after scan Currently beacon loss detection triggers after a scan. A probe request is sent and a message like this is printed to the log: wlan0: beacon loss from AP 00:12:17:e7:98:de - sending probe request But in fact there is no beacon loss, the beacons are just not received because of the ongoing scan. Fix it by updating last_beacon after the scan has finished. Reported-by: Jaswinder Singh Rajput Signed-off-by: Kalle Valo Acked-by: Johannes Berg Signed-off-by: John W. Linville --- net/mac80211/mlme.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 1619e0cd26e..ccfc21aa0b6 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1913,9 +1913,17 @@ static void ieee80211_sta_work(struct work_struct *work) static void ieee80211_restart_sta_timer(struct ieee80211_sub_if_data *sdata) { - if (sdata->vif.type == NL80211_IFTYPE_STATION) + if (sdata->vif.type == NL80211_IFTYPE_STATION) { + /* + * Need to update last_beacon to avoid beacon loss + * test to trigger. + */ + sdata->u.mgd.last_beacon = jiffies; + + queue_work(sdata->local->hw.workqueue, &sdata->u.mgd.work); + } } /* interface setup */ -- cgit v1.2.3 From 7e0986c17f695952ce5d61ed793ce048ba90a661 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Sun, 19 Apr 2009 13:22:11 +0200 Subject: mac80211: fix basic rate bitmap calculation "mac80211: fix basic rates setting from association response" introduced a copy/paste error. Unfortunately, this not just leads to wrong data being passed to the driver but is remotely exploitable for some hardware or driver combinations. Signed-off-by: Johannes Berg Cc: stable@kernel.org [2.6.29] Signed-off-by: John W. Linville --- net/mac80211/mlme.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index ccfc21aa0b6..132938b073d 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1366,7 +1366,7 @@ static void ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata, for (i = 0; i < elems.ext_supp_rates_len; i++) { int rate = (elems.ext_supp_rates[i] & 0x7f) * 5; - bool is_basic = !!(elems.supp_rates[i] & 0x80); + bool is_basic = !!(elems.ext_supp_rates[i] & 0x80); if (rate > 110) have_higher_than_11mbit = true; -- cgit v1.2.3