From 82736f4d1d2b7063b829cc93171a6e5aea8a9c49 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Wed, 23 Jul 2008 21:28:54 -0700 Subject: generic irqs: handle failure of irqchip->set_type in setup_irq MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit set_type returns an int indicating success or failure, but up to now setup_irq ignores that. In my case this resulted in a machine hang: gpio-keys requested IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, but arm/ns9xxx can only trigger on one direction so set_type didn't touch the configuration which happens do default to a level sensitiveness and returned -EINVAL. setup_irq ignored that and unmasked the irq. This resulted in an endless triggering of the gpio-key interrupt service routine which effectively killed the machine. With this patch applied setup_irq propagates the error to the caller. Note that before in the case chip && !chip->set_type && !chip->name a NULL pointer was feed to printk. This is fixed, too. Signed-off-by: Uwe Kleine-König Cc: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/irq/manage.c | 64 +++++++++++++++++++++++++++++++++++------------------ 1 file changed, 42 insertions(+), 22 deletions(-) diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c index 3cfc0fefb5e..5bc6e5ecc49 100644 --- a/kernel/irq/manage.c +++ b/kernel/irq/manage.c @@ -308,6 +308,30 @@ void compat_irq_chip_set_default_handler(struct irq_desc *desc) desc->handle_irq = NULL; } +static int __irq_set_trigger(struct irq_chip *chip, unsigned int irq, + unsigned long flags) +{ + int ret; + + if (!chip || !chip->set_type) { + /* + * IRQF_TRIGGER_* but the PIC does not support multiple + * flow-types? + */ + pr_warning("No set_type function for IRQ %d (%s)\n", irq, + chip ? (chip->name ? : "unknown") : "unknown"); + return 0; + } + + ret = chip->set_type(irq, flags & IRQF_TRIGGER_MASK); + + if (ret) + pr_err("setting flow type for irq %u failed (%pF)\n", + irq, chip->set_type); + + return ret; +} + /* * Internal function to register an irqaction - typically used to * allocate special interrupts that are part of the architecture. @@ -319,6 +343,7 @@ int setup_irq(unsigned int irq, struct irqaction *new) const char *old_name = NULL; unsigned long flags; int shared = 0; + int ret; if (irq >= NR_IRQS) return -EINVAL; @@ -376,35 +401,23 @@ int setup_irq(unsigned int irq, struct irqaction *new) shared = 1; } - *p = new; - - /* Exclude IRQ from balancing */ - if (new->flags & IRQF_NOBALANCING) - desc->status |= IRQ_NO_BALANCING; - if (!shared) { irq_chip_set_defaults(desc->chip); -#if defined(CONFIG_IRQ_PER_CPU) - if (new->flags & IRQF_PERCPU) - desc->status |= IRQ_PER_CPU; -#endif - /* Setup the type (level, edge polarity) if configured: */ if (new->flags & IRQF_TRIGGER_MASK) { - if (desc->chip->set_type) - desc->chip->set_type(irq, - new->flags & IRQF_TRIGGER_MASK); - else - /* - * IRQF_TRIGGER_* but the PIC does not support - * multiple flow-types? - */ - printk(KERN_WARNING "No IRQF_TRIGGER set_type " - "function for IRQ %d (%s)\n", irq, - desc->chip->name); + ret = __irq_set_trigger(desc->chip, irq, new->flags); + + if (ret) { + spin_unlock_irqrestore(&desc->lock, flags); + return ret; + } } else compat_irq_chip_set_default_handler(desc); +#if defined(CONFIG_IRQ_PER_CPU) + if (new->flags & IRQF_PERCPU) + desc->status |= IRQ_PER_CPU; +#endif desc->status &= ~(IRQ_AUTODETECT | IRQ_WAITING | IRQ_INPROGRESS | IRQ_SPURIOUS_DISABLED); @@ -423,6 +436,13 @@ int setup_irq(unsigned int irq, struct irqaction *new) /* Set default affinity mask once everything is setup */ irq_select_affinity(irq); } + + *p = new; + + /* Exclude IRQ from balancing */ + if (new->flags & IRQF_NOBALANCING) + desc->status |= IRQ_NO_BALANCING; + /* Reset broken irq detection when installing new handler */ desc->irq_count = 0; desc->irqs_unhandled = 0; -- cgit v1.2.3