From 8bb09db375fe4f15d16315947500e827caa0fe9c Mon Sep 17 00:00:00 2001 From: Andy Walls Date: Tue, 9 Jun 2009 20:47:21 -0300 Subject: V4L/DVB (11951): cx18: Add DVB-T support for the Leadtek WinFast DVR3100 H This adds support for DVB-T on the Leadtek DVR3100 H and should also get analog TV capture from the tuner working properly as well. DVB-T 6 MHz and 8 MHz have been tested and verified to work by Terry Wu of Leadtek. DVB-T 7 MHz has also been verified working with a change developed by Terry to the tuner-xc2028.c driver. Special thanks go to Terry Wu of Leadtek who provided the needed information and testing to get digital TV working for the Leadtek DVR3100 H. Reported-by: Terry Wu Tested-by: Terry Wu Signed-off-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx18/cx18-cards.c | 18 ++++-------- drivers/media/video/cx18/cx18-dvb.c | 53 +++++++++++++++++++++++++++++++++-- 2 files changed, 57 insertions(+), 14 deletions(-) diff --git a/drivers/media/video/cx18/cx18-cards.c b/drivers/media/video/cx18/cx18-cards.c index ae631aa2cd3..c92a25036f0 100644 --- a/drivers/media/video/cx18/cx18-cards.c +++ b/drivers/media/video/cx18/cx18-cards.c @@ -369,10 +369,7 @@ static const struct cx18_card cx18_card_leadtek_pvr2100 = { }, .radio_input = { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 2 }, .ddr = { - /* - * Pointer to proper DDR config values provided by - * Terry Wu - */ + /* Pointer to proper DDR config values provided by Terry Wu */ .chip_config = 0x303, .refresh = 0x3bb, .timing1 = 0x24220e83, @@ -401,13 +398,13 @@ static const struct cx18_card_pci_info cx18_pci_leadtek_dvr3100h[] = { static const struct cx18_card cx18_card_leadtek_dvr3100h = { .type = CX18_CARD_LEADTEK_DVR3100H, .name = "Leadtek WinFast DVR3100 H", - .comment = "Experimenters and photos needed for device to work well.\n" - "\tTo help, mail the ivtv-devel list (www.ivtvdriver.org).\n", + .comment = "Simultaneous DVB-T and Analog capture supported,\n" + "\texcept when capturing Analog from the antenna input.\n", .v4l2_capabilities = CX18_CAP_ENCODER, .hw_audio_ctrl = CX18_HW_418_AV, .hw_muxer = CX18_HW_GPIO_MUX, .hw_all = CX18_HW_418_AV | CX18_HW_TUNER | CX18_HW_GPIO_MUX | - CX18_HW_GPIO_RESET_CTRL, + CX18_HW_DVB | CX18_HW_GPIO_RESET_CTRL, .video_inputs = { { CX18_CARD_INPUT_VID_TUNER, 0, CX18_AV_COMPOSITE2 }, { CX18_CARD_INPUT_SVIDEO1, 1, @@ -424,10 +421,7 @@ static const struct cx18_card cx18_card_leadtek_dvr3100h = { }, .radio_input = { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 2 }, .ddr = { - /* - * Pointer to proper DDR config values provided by - * Terry Wu - */ + /* Pointer to proper DDR config values provided by Terry Wu */ .chip_config = 0x303, .refresh = 0x3bb, .timing1 = 0x24220e83, @@ -439,7 +433,7 @@ static const struct cx18_card cx18_card_leadtek_dvr3100h = { .gpio_init.direction = 0x7, .gpio_audio_input = { .mask = 0x7, .tuner = 0x6, .linein = 0x2, .radio = 0x2 }, - .xceive_pin = 15, + .xceive_pin = 1, .pci_list = cx18_pci_leadtek_dvr3100h, .i2c = &cx18_i2c_std, }; diff --git a/drivers/media/video/cx18/cx18-dvb.c b/drivers/media/video/cx18/cx18-dvb.c index e7285a1096f..6ea3fe623ef 100644 --- a/drivers/media/video/cx18/cx18-dvb.c +++ b/drivers/media/video/cx18/cx18-dvb.c @@ -26,12 +26,17 @@ #include "cx18-queue.h" #include "cx18-streams.h" #include "cx18-cards.h" +#include "cx18-gpio.h" #include "s5h1409.h" #include "mxl5005s.h" +#include "zl10353.h" +#include "tuner-xc2028.h" DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); #define CX18_REG_DMUX_NUM_PORT_0_CONTROL 0xd5a000 +#define CX18_CLOCK_ENABLE2 0xc71024 +#define CX18_DMUX_CLK_MASK 0x0080 static struct mxl5005s_config hauppauge_hvr1600_tuner = { .i2c_address = 0xC6 >> 1, @@ -58,7 +63,15 @@ static struct s5h1409_config hauppauge_hvr1600_config = { .inversion = S5H1409_INVERSION_OFF, .status_mode = S5H1409_DEMODLOCKING, .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK +}; +/* Information/confirmation of proper config values provided by Terry Wu */ +static struct zl10353_config leadtek_dvr3100h_demod = { + .demod_address = 0x1e >> 1, /* Datasheet suggested straps */ + .if2 = 45600, /* 4.560 MHz IF from the XC3028 */ + .parallel_ts = 1, /* Not a serial TS */ + .no_tuner = 1, /* XC3028 is not behind the gate */ + .disable_i2c_gate_ctrl = 1, /* Disable the I2C gate */ }; static int dvb_register(struct cx18_stream *stream); @@ -99,6 +112,7 @@ static int cx18_dvb_start_feed(struct dvb_demux_feed *feed) cx18_write_reg(cx, v, CX18_REG_DMUX_NUM_PORT_0_CONTROL); break; + case CX18_CARD_LEADTEK_DVR3100H: default: /* Assumption - Parallel transport - Signalling * undefined or default. @@ -268,8 +282,7 @@ void cx18_dvb_unregister(struct cx18_stream *stream) } /* All the DVB attach calls go here, this function get's modified - * for each new card. No other function in this file needs - * to change. + * for each new card. cx18_dvb_start_feed() will also need changes. */ static int dvb_register(struct cx18_stream *stream) { @@ -290,6 +303,29 @@ static int dvb_register(struct cx18_stream *stream) ret = 0; } break; + case CX18_CARD_LEADTEK_DVR3100H: + dvb->fe = dvb_attach(zl10353_attach, + &leadtek_dvr3100h_demod, + &cx->i2c_adap[1]); + if (dvb->fe != NULL) { + struct dvb_frontend *fe; + struct xc2028_config cfg = { + .i2c_adap = &cx->i2c_adap[1], + .i2c_addr = 0xc2 >> 1, + .ctrl = NULL, + }; + static struct xc2028_ctrl ctrl = { + .fname = XC2028_DEFAULT_FIRMWARE, + .max_len = 64, + .demod = XC3028_FE_ZARLINK456, + .type = XC2028_AUTO, + }; + + fe = dvb_attach(xc2028_attach, dvb->fe, &cfg); + if (fe != NULL && fe->ops.tuner_ops.set_config != NULL) + fe->ops.tuner_ops.set_config(fe, &ctrl); + } + break; default: /* No Digital Tv Support */ break; @@ -300,6 +336,8 @@ static int dvb_register(struct cx18_stream *stream) return -1; } + dvb->fe->callback = cx18_reset_tuner_gpio; + ret = dvb_register_frontend(&dvb->dvb_adapter, dvb->fe); if (ret < 0) { if (dvb->fe->ops.release) @@ -307,5 +345,16 @@ static int dvb_register(struct cx18_stream *stream) return ret; } + /* + * The firmware seems to enable the TS DMUX clock + * under various circumstances. However, since we know we + * might use it, let's just turn it on ourselves here. + */ + cx18_write_reg_expect(cx, + (CX18_DMUX_CLK_MASK << 16) | CX18_DMUX_CLK_MASK, + CX18_CLOCK_ENABLE2, + CX18_DMUX_CLK_MASK, + (CX18_DMUX_CLK_MASK << 16) | CX18_DMUX_CLK_MASK); + return ret; } -- cgit v1.2.3