From 36e9dc469b1300d8bec6f2ab48b4556e2c4241ba Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sat, 2 Feb 2008 19:56:28 +0100 Subject: dtc2278: fix ->io_32bit handling On DTC2278 32-bit I/O has to be enabled for both devices on the port so always enable it during init time and disallow further changes. Cc: Alan Cox Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide.c | 4 ---- drivers/ide/legacy/dtc2278.c | 12 ++++++------ 2 files changed, 6 insertions(+), 10 deletions(-) diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index ab9ca2b5b66..fb0c47c8819 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -791,10 +791,6 @@ int set_io_32bit(ide_drive_t *drive, int arg) return -EBUSY; drive->io_32bit = arg; -#ifdef CONFIG_BLK_DEV_DTC2278 - if (HWIF(drive)->chipset == ide_dtc2278) - HWIF(drive)->drives[!drive->select.b.unit].io_32bit = arg; -#endif /* CONFIG_BLK_DEV_DTC2278 */ spin_unlock_irq(&ide_lock); diff --git a/drivers/ide/legacy/dtc2278.c b/drivers/ide/legacy/dtc2278.c index 611c9705a3a..092c04abbe7 100644 --- a/drivers/ide/legacy/dtc2278.c +++ b/drivers/ide/legacy/dtc2278.c @@ -84,12 +84,6 @@ static void dtc2278_set_pio_mode(ide_drive_t *drive, const u8 pio) /* Actually we do - there is a data sheet available for the Winbond but does anyone actually care */ } - - /* - * 32bit I/O has to be enabled for *both* drives at the same time. - */ - drive->io_32bit = 1; - HWIF(drive)->drives[!drive->select.b.unit].io_32bit = 1; } static int __init dtc2278_probe(void) @@ -123,18 +117,24 @@ static int __init dtc2278_probe(void) local_irq_restore(flags); hwif->serialized = 1; + hwif->no_io_32bit = 1; /* disallow ->io_32bit changes */ hwif->chipset = ide_dtc2278; hwif->pio_mask = ATA_PIO4; hwif->set_pio_mode = &dtc2278_set_pio_mode; hwif->drives[0].no_unmask = 1; hwif->drives[1].no_unmask = 1; + hwif->drives[0].io_32bit = 1; + hwif->drives[1].io_32bit = 1; hwif->mate = mate; mate->serialized = 1; + mate->no_io_32bit = 1; mate->chipset = ide_dtc2278; mate->pio_mask = ATA_PIO4; mate->drives[0].no_unmask = 1; mate->drives[1].no_unmask = 1; + mate->drives[0].io_32bit = 1; + mate->drives[1].io_32bit = 1; mate->mate = hwif; mate->channel = 1; -- cgit v1.2.3 From bd38dd3c13c143c60d6284d145bf1273a0f64004 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sat, 2 Feb 2008 19:56:29 +0100 Subject: au1xxx-ide: fix ->io_32bit handling The host driver must set hwif's ->no_io_32bit setting not drive's one (ide_port_tune_devices() overrides drive's setting). Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/mips/au1xxx-ide.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/ide/mips/au1xxx-ide.c b/drivers/ide/mips/au1xxx-ide.c index cd42b30a7a3..6e98662b119 100644 --- a/drivers/ide/mips/au1xxx-ide.c +++ b/drivers/ide/mips/au1xxx-ide.c @@ -658,8 +658,7 @@ static int au_ide_probe(struct device *dev) hwif->drives[0].autotune = 1; /* 1=autotune, 2=noautotune, 0=default */ hwif->drives[1].autotune = 1; - hwif->drives[0].no_io_32bit = 1; - hwif->drives[1].no_io_32bit = 1; + hwif->no_io_32bit = 1; auide_hwif.hwif = hwif; hwif->hwif_data = &auide_hwif; -- cgit v1.2.3 From b4d1c73dcd2b3575921df06f42217bc281b83a9b Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sat, 2 Feb 2008 19:56:29 +0100 Subject: atiixp/cs5535/scc_pata: fix "idex=ata66" parameter handling Don't override the cable type if the "idex=ata66" parameter was used. While at it: * atiixp.c: factor out cable detection to atiixp_cable_detect() from init_hwif_atiixp(). * cs5535.c: pass 'ide_hwif_t *hwif' instead of 'struct pci_dev *dev' to cs5535_cable_detect(). * scc_pata.c: factor out cable detection to scc_cable_detect() from init_hwif_scc() and remove incorrect comment. Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/pci/atiixp.c | 24 +++++++++++++++--------- drivers/ide/pci/cs5535.c | 8 ++++---- drivers/ide/pci/scc_pata.c | 9 +++++++-- 3 files changed, 26 insertions(+), 15 deletions(-) diff --git a/drivers/ide/pci/atiixp.c b/drivers/ide/pci/atiixp.c index b56274af178..648fdf30cdf 100644 --- a/drivers/ide/pci/atiixp.c +++ b/drivers/ide/pci/atiixp.c @@ -121,6 +121,19 @@ static void atiixp_set_dma_mode(ide_drive_t *drive, const u8 speed) spin_unlock_irqrestore(&atiixp_lock, flags); } +static u8 __devinit atiixp_cable_detect(ide_hwif_t *hwif) +{ + struct pci_dev *pdev = to_pci_dev(hwif->dev); + u8 udma_mode = 0, ch = hwif->channel; + + pci_read_config_byte(pdev, ATIIXP_IDE_UDMA_MODE + ch, &udma_mode); + + if ((udma_mode & 0x07) >= 0x04 || (udma_mode & 0x70) >= 0x40) + return ATA_CBL_PATA80; + else + return ATA_CBL_PATA40; +} + /** * init_hwif_atiixp - fill in the hwif for the ATIIXP * @hwif: IDE interface @@ -131,21 +144,14 @@ static void atiixp_set_dma_mode(ide_drive_t *drive, const u8 speed) static void __devinit init_hwif_atiixp(ide_hwif_t *hwif) { - struct pci_dev *pdev = to_pci_dev(hwif->dev); - u8 udma_mode = 0, ch = hwif->channel; - hwif->set_pio_mode = &atiixp_set_pio_mode; hwif->set_dma_mode = &atiixp_set_dma_mode; if (!hwif->dma_base) return; - pci_read_config_byte(pdev, ATIIXP_IDE_UDMA_MODE + ch, &udma_mode); - - if ((udma_mode & 0x07) >= 0x04 || (udma_mode & 0x70) >= 0x40) - hwif->cbl = ATA_CBL_PATA80; - else - hwif->cbl = ATA_CBL_PATA40; + if (hwif->cbl != ATA_CBL_PATA40_SHORT) + hwif->cbl = atiixp_cable_detect(hwif); } static const struct ide_port_info atiixp_pci_info[] __devinitdata = { diff --git a/drivers/ide/pci/cs5535.c b/drivers/ide/pci/cs5535.c index 66433aa53f5..50046436a56 100644 --- a/drivers/ide/pci/cs5535.c +++ b/drivers/ide/pci/cs5535.c @@ -155,8 +155,9 @@ static void cs5535_set_pio_mode(ide_drive_t *drive, const u8 pio) cs5535_set_speed(drive, XFER_PIO_0 + pio); } -static u8 __devinit cs5535_cable_detect(struct pci_dev *dev) +static u8 __devinit cs5535_cable_detect(ide_hwif_t *hwif) { + struct pci_dev *dev = to_pci_dev(hwif->dev); u8 bit; /* if a 80 wire cable was detected */ @@ -175,15 +176,14 @@ static u8 __devinit cs5535_cable_detect(struct pci_dev *dev) */ static void __devinit init_hwif_cs5535(ide_hwif_t *hwif) { - struct pci_dev *dev = to_pci_dev(hwif->dev); - hwif->set_pio_mode = &cs5535_set_pio_mode; hwif->set_dma_mode = &cs5535_set_dma_mode; if (hwif->dma_base == 0) return; - hwif->cbl = cs5535_cable_detect(dev); + if (hwif->cbl != ATA_CBL_PATA40_SHORT) + hwif->cbl = cs5535_cable_detect(hwif); } static const struct ide_port_info cs5535_chipset __devinitdata = { diff --git a/drivers/ide/pci/scc_pata.c b/drivers/ide/pci/scc_pata.c index 7694969b02c..dcd44d7c084 100644 --- a/drivers/ide/pci/scc_pata.c +++ b/drivers/ide/pci/scc_pata.c @@ -644,6 +644,11 @@ static void __devinit init_iops_scc(ide_hwif_t *hwif) init_mmio_iops_scc(hwif); } +static u8 __devinit scc_cable_detect(ide_hwif_t *hwif) +{ + return ATA_CBL_PATA80; +} + /** * init_hwif_scc - set up hwif * @hwif: interface to set up @@ -678,8 +683,8 @@ static void __devinit init_hwif_scc(ide_hwif_t *hwif) else hwif->ultra_mask = ATA_UDMA5; /* 100MHz */ - /* we support 80c cable only. */ - hwif->cbl = ATA_CBL_PATA80; + if (hwif->cbl != ATA_CBL_PATA40_SHORT) + hwif->cbl = scc_cable_detect(hwif); } #define DECLARE_SCC_DEV(name_str) \ -- cgit v1.2.3 From d4e6d4eb164bc0a110e2e0ba031e713e6226a27a Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sat, 2 Feb 2008 19:56:30 +0100 Subject: macide: remove drive->capacity64 quirk Nowadays IDE core always provides drive ID and ide-disk always setups drive->capacity64 so this quirk is no longer needed. Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/legacy/macide.c | 10 ---------- 1 file changed, 10 deletions(-) diff --git a/drivers/ide/legacy/macide.c b/drivers/ide/legacy/macide.c index c54d07ff64f..12cd26d0aa2 100644 --- a/drivers/ide/legacy/macide.c +++ b/drivers/ide/legacy/macide.c @@ -123,16 +123,6 @@ static int __init macide_init(void) ide_init_port_data(hwif, index); ide_init_port_hw(hwif, &hw); - if (macintosh_config->ide_type == MAC_IDE_BABOON && - macintosh_config->ident == MAC_MODEL_PB190) { - /* Fix breakage in ide-disk.c: drive capacity */ - /* is not initialized for drives without a */ - /* hardware ID, and we can't get that without */ - /* probing the drive which freezes a 190. */ - ide_drive_t *drive = &hwif->drives[0]; - drive->capacity64 = drive->cyl*drive->head*drive->sect; - } - hwif->mmio = 1; ide_device_add(idx); -- cgit v1.2.3 From bf77c5317168eb73894bcc9a455429c4589a179d Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sat, 2 Feb 2008 19:56:30 +0100 Subject: ide: always set DMA masks in ide_pci_setup_ports() Always set DMA masks in ide_pci_setup_ports() to make sure that the valid masks for a host are set. Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/setup-pci.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c index 05db429a7da..acef85d1c58 100644 --- a/drivers/ide/setup-pci.c +++ b/drivers/ide/setup-pci.c @@ -558,10 +558,15 @@ void ide_pci_setup_ports(struct pci_dev *dev, const struct ide_port_info *d, int hwif->drives[1].unmask = 1; } - if (hwif->dma_base) { - hwif->swdma_mask = d->swdma_mask; - hwif->mwdma_mask = d->mwdma_mask; - hwif->ultra_mask = d->udma_mask; + hwif->swdma_mask = d->swdma_mask; + hwif->mwdma_mask = d->mwdma_mask; + hwif->ultra_mask = d->udma_mask; + + if ((d->host_flags && IDE_HFLAG_NO_DMA) == 0 && + hwif->dma_base == 0) { + hwif->swdma_mask = 0; + hwif->mwdma_mask = 0; + hwif->ultra_mask = 0; } hwif->drives[0].autotune = 1; -- cgit v1.2.3 From 1ebf74936b1fccb5b65940f99ccddd74ec4d1fef Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sat, 2 Feb 2008 19:56:30 +0100 Subject: ide: separate PCI specific init from generic init in ide_pci_setup_ports() * Setup ->mate and ->channel in ide_pci_setup_ports() instead of in ide_hwif_configure(). * Make 'port' parameter for ide_hwif_configure() 'unsigned int'. * Separate PCI specific init from generic init in ide_pci_setup_ports(). Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/setup-pci.c | 29 +++++++++++++++++++++-------- 1 file changed, 21 insertions(+), 8 deletions(-) diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c index acef85d1c58..53d9979edc7 100644 --- a/drivers/ide/setup-pci.c +++ b/drivers/ide/setup-pci.c @@ -339,7 +339,8 @@ static int ide_pci_check_iomem(struct pci_dev *dev, const struct ide_port_info * * ide_hwif_configure - configure an IDE interface * @dev: PCI device holding interface * @d: IDE port info - * @mate: Paired interface if any + * @port: port number + * @irq: PCI IRQ * * Perform the initial set up for the hardware interface structure. This * is done per interface port rather than per PCI device. There may be @@ -348,7 +349,9 @@ static int ide_pci_check_iomem(struct pci_dev *dev, const struct ide_port_info * * Returns the new hardware interface structure, or NULL on a failure */ -static ide_hwif_t *ide_hwif_configure(struct pci_dev *dev, const struct ide_port_info *d, ide_hwif_t *mate, int port, int irq) +static ide_hwif_t *ide_hwif_configure(struct pci_dev *dev, + const struct ide_port_info *d, + unsigned int port, int irq) { unsigned long ctl = 0, base = 0; ide_hwif_t *hwif; @@ -394,12 +397,7 @@ static ide_hwif_t *ide_hwif_configure(struct pci_dev *dev, const struct ide_port hwif->dev = &dev->dev; hwif->cds = d; - hwif->channel = port; - if (mate) { - hwif->mate = mate; - mate->mate = hwif; - } return hwif; } @@ -527,10 +525,25 @@ void ide_pci_setup_ports(struct pci_dev *dev, const struct ide_port_info *d, int continue; /* port not enabled */ } - if ((hwif = ide_hwif_configure(dev, d, mate, port, pciirq)) == NULL) + hwif = ide_hwif_configure(dev, d, port, pciirq); + if (hwif == NULL) continue; *(idx + port) = hwif->index; + } + + for (port = 0; port < channels; ++port) { + if (*(idx + port) == 0xff) + continue; + + hwif = &ide_hwifs[*(idx + port)]; + + if (mate) { + hwif->mate = mate; + mate->mate = hwif; + } + + hwif->channel = port; if (d->init_iops) d->init_iops(hwif); -- cgit v1.2.3 From c413b9b94d9a8e7548cc4b2e04b7df0439ce76fd Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sat, 2 Feb 2008 19:56:31 +0100 Subject: ide: add struct ide_port_info instances to legacy host drivers * Remove 'struct pci_dev *dev' argument from ide_hwif_setup_dma(). * Un-static ide_hwif_setup_dma() and add CONFIG_BLK_DEV_IDEDMA_PCI=n version. * Add 'const struct ide_port_info *d' argument to ide_device_add[_all](). * Factor out generic ports init from ide_pci_setup_ports() to ide_init_port(), move it to ide-probe.c and call it in in ide_device_add_all() instead of ide_pci_setup_ports(). * Move ->mate setup to ide_device_add_all() from ide_port_init(). * Add IDE_HFLAG_NO_AUTOTUNE host flag for host drivers that don't enable ->autotune currently. * Setup hwif->chipset in ide_init_port() but iff pi->chipset is set (to not override setup done by ide_hwif_configure()). * Add ETRAX host handling to ide_device_add_all(). * cmd640.c: set IDE_HFLAG_ABUSE_* also for CONFIG_BLK_DEV_CMD640_ENHANCED=n. * pmac.c: make pmac_ide_setup_dma() return an error value and move DMA masks setup to pmac_ide_setup_device(). * Add 'struct ide_port_info' instances to legacy host drivers, pass them to ide_device_add() calls and then remove open-coded ports initialization. Reviewed-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/arm/icside.c | 25 ++++++------ drivers/ide/arm/ide_arm.c | 2 +- drivers/ide/arm/rapide.c | 2 +- drivers/ide/cris/ide-cris.c | 18 +++++---- drivers/ide/h8300/ide-h8300.c | 2 +- drivers/ide/ide-generic.c | 2 +- drivers/ide/ide-pnp.c | 2 +- drivers/ide/ide-probe.c | 82 ++++++++++++++++++++++++++++++++++++-- drivers/ide/ide.c | 2 +- drivers/ide/legacy/ali14xx.c | 24 +++++------ drivers/ide/legacy/buddha.c | 2 +- drivers/ide/legacy/dtc2278.c | 24 +++++------ drivers/ide/legacy/falconide.c | 2 +- drivers/ide/legacy/gayle.c | 2 +- drivers/ide/legacy/ht6560b.c | 22 +++++----- drivers/ide/legacy/ide_platform.c | 2 +- drivers/ide/legacy/macide.c | 2 +- drivers/ide/legacy/q40ide.c | 2 +- drivers/ide/legacy/qd65xx.c | 23 ++++++----- drivers/ide/legacy/umc8672.c | 24 +++++------ drivers/ide/mips/au1xxx-ide.c | 31 +++++---------- drivers/ide/mips/swarm.c | 2 +- drivers/ide/pci/cmd640.c | 29 +++++++------- drivers/ide/pci/cs5520.c | 2 +- drivers/ide/pci/sgiioc4.c | 18 ++++++--- drivers/ide/ppc/mpc8xx.c | 2 +- drivers/ide/ppc/pmac.c | 84 ++++++++++++++++----------------------- drivers/ide/setup-pci.c | 81 ++++--------------------------------- include/linux/ide.h | 13 +++++- 29 files changed, 258 insertions(+), 270 deletions(-) diff --git a/drivers/ide/arm/icside.c b/drivers/ide/arm/icside.c index 8d2cc47a362..fb00f3827ec 100644 --- a/drivers/ide/arm/icside.c +++ b/drivers/ide/arm/icside.c @@ -377,9 +377,6 @@ static void icside_dma_lost_irq(ide_drive_t *drive) static void icside_dma_init(ide_hwif_t *hwif) { - hwif->mwdma_mask = 7; /* MW0..2 */ - hwif->swdma_mask = 7; /* SW0..2 */ - hwif->dmatable_cpu = NULL; hwif->dmatable_dma = 0; hwif->set_dma_mode = icside_set_dma_mode; @@ -459,11 +456,19 @@ icside_register_v5(struct icside_state *state, struct expansion_card *ec) idx[0] = hwif->index; - ide_device_add(idx); + ide_device_add(idx, NULL); return 0; } +static const struct ide_port_info icside_v6_port_info __initdata = { + .host_flags = IDE_HFLAG_SERIALIZE | + IDE_HFLAG_NO_DMA | /* no SFF-style DMA */ + IDE_HFLAG_NO_AUTOTUNE, + .mwdma_mask = ATA_MWDMA2, + .swdma_mask = ATA_SWDMA2, +}; + static int __init icside_register_v6(struct icside_state *state, struct expansion_card *ec) { @@ -472,6 +477,7 @@ icside_register_v6(struct icside_state *state, struct expansion_card *ec) unsigned int sel = 0; int ret; u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; + struct ide_port_info d = icside_v6_port_info; ioc_base = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, 0); if (!ioc_base) { @@ -521,30 +527,25 @@ icside_register_v6(struct icside_state *state, struct expansion_card *ec) state->hwif[1] = mate; hwif->maskproc = icside_maskproc; - hwif->channel = 0; hwif->hwif_data = state; - hwif->mate = mate; - hwif->serialized = 1; hwif->config_data = (unsigned long)ioc_base; hwif->select_data = sel; mate->maskproc = icside_maskproc; - mate->channel = 1; mate->hwif_data = state; - mate->mate = hwif; - mate->serialized = 1; mate->config_data = (unsigned long)ioc_base; mate->select_data = sel | 1; if (ec->dma != NO_DMA && !request_dma(ec->dma, hwif->name)) { icside_dma_init(hwif); icside_dma_init(mate); - } + } else + d.mwdma_mask = d.swdma_mask = 0; idx[0] = hwif->index; idx[1] = mate->index; - ide_device_add(idx); + ide_device_add(idx, &d); return 0; diff --git a/drivers/ide/arm/ide_arm.c b/drivers/ide/arm/ide_arm.c index 60f2497542c..43a70e91363 100644 --- a/drivers/ide/arm/ide_arm.c +++ b/drivers/ide/arm/ide_arm.c @@ -39,7 +39,7 @@ static int __init ide_arm_init(void) ide_init_port_hw(hwif, &hw); idx[0] = hwif->index; - ide_device_add(idx); + ide_device_add(idx, NULL); } return 0; diff --git a/drivers/ide/arm/rapide.c b/drivers/ide/arm/rapide.c index c8b6581e624..b30adcf321c 100644 --- a/drivers/ide/arm/rapide.c +++ b/drivers/ide/arm/rapide.c @@ -58,7 +58,7 @@ rapide_probe(struct expansion_card *ec, const struct ecard_id *id) idx[0] = hwif->index; - ide_device_add(idx); + ide_device_add(idx, NULL); ecard_set_drvdata(ec, hwif); goto out; diff --git a/drivers/ide/cris/ide-cris.c b/drivers/ide/cris/ide-cris.c index 0640a38ff12..ac645263fd0 100644 --- a/drivers/ide/cris/ide-cris.c +++ b/drivers/ide/cris/ide-cris.c @@ -753,6 +753,15 @@ static void cris_set_dma_mode(ide_drive_t *drive, const u8 speed) cris_ide_set_speed(TYPE_DMA, 0, strobe, hold); } +static const struct ide_port_info cris_port_info __initdata = { + .chipset = ide_etrax100, + .host_flags = IDE_HFLAG_NO_ATAPI_DMA | + IDE_HFLAG_NO_DMA, /* no SFF-style DMA */ + .pio_mask = ATA_PIO4, + .udma_mask = cris_ultra_mask, + .mwdma_mask = ATA_MWDMA2, +}; + static int __init init_e100_ide(void) { hw_regs_t hw; @@ -780,7 +789,6 @@ static int __init init_e100_ide(void) ide_init_port_data(hwif, hwif->index); ide_init_port_hw(hwif, &hw); hwif->mmio = 1; - hwif->chipset = ide_etrax100; hwif->set_pio_mode = &cris_set_pio_mode; hwif->set_dma_mode = &cris_set_dma_mode; hwif->ata_input_data = &cris_ide_input_data; @@ -799,12 +807,6 @@ static int __init init_e100_ide(void) hwif->INB = &cris_ide_inb; hwif->INW = &cris_ide_inw; hwif->cbl = ATA_CBL_PATA40; - hwif->host_flags |= IDE_HFLAG_NO_ATAPI_DMA; - hwif->pio_mask = ATA_PIO4, - hwif->drives[0].autotune = 1; - hwif->drives[1].autotune = 1; - hwif->ultra_mask = cris_ultra_mask; - hwif->mwdma_mask = 0x07; /* Multiword DMA 0-2 */ idx[h] = hwif->index; } @@ -820,7 +822,7 @@ static int __init init_e100_ide(void) cris_ide_set_speed(TYPE_DMA, 0, ATA_DMA2_STROBE, ATA_DMA2_HOLD); cris_ide_set_speed(TYPE_UDMA, ATA_UDMA2_CYC, ATA_UDMA2_DVS, 0); - ide_device_add(idx); + ide_device_add(idx, &cris_port_info); return 0; } diff --git a/drivers/ide/h8300/ide-h8300.c b/drivers/ide/h8300/ide-h8300.c index 02432958dfe..520aec07570 100644 --- a/drivers/ide/h8300/ide-h8300.c +++ b/drivers/ide/h8300/ide-h8300.c @@ -114,7 +114,7 @@ static int __init h8300_ide_init(void) idx[0] = index; - ide_device_add(idx); + ide_device_add(idx, NULL); return 0; diff --git a/drivers/ide/ide-generic.c b/drivers/ide/ide-generic.c index bb30c29f6ec..be469dbbe8f 100644 --- a/drivers/ide/ide-generic.c +++ b/drivers/ide/ide-generic.c @@ -23,7 +23,7 @@ static int __init ide_generic_init(void) for (i = 0; i < MAX_HWIFS; i++) idx[i] = ide_hwifs[i].present ? 0xff : i; - ide_device_add_all(idx); + ide_device_add_all(idx, NULL); if (ide_hwifs[0].io_ports[IDE_DATA_OFFSET]) ide_release_lock(); /* for atari only */ diff --git a/drivers/ide/ide-pnp.c b/drivers/ide/ide-pnp.c index 4bda5cf2be3..61c33ef64bd 100644 --- a/drivers/ide/ide-pnp.c +++ b/drivers/ide/ide-pnp.c @@ -49,7 +49,7 @@ static int idepnp_probe(struct pnp_dev * dev, const struct pnp_device_id *dev_id printk(KERN_INFO "ide%d: generic PnP IDE interface\n", index); pnp_set_drvdata(dev,hwif); - ide_device_add(idx); + ide_device_add(idx, NULL); return 0; } diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 98a8af44bf6..4c3d2cf3be5 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -1289,11 +1289,85 @@ static void hwif_register_devices(ide_hwif_t *hwif) } } -int ide_device_add_all(u8 *idx) +static void ide_init_port(ide_hwif_t *hwif, unsigned int port, + const struct ide_port_info *d) { - ide_hwif_t *hwif; + if (d->chipset != ide_etrax100) + hwif->channel = port; + + if (d->chipset) + hwif->chipset = d->chipset; + + if (d->init_iops) + d->init_iops(hwif); + + if ((d->host_flags & IDE_HFLAG_NO_DMA) == 0) + ide_hwif_setup_dma(hwif, d); + + if ((!hwif->irq && (d->host_flags & IDE_HFLAG_LEGACY_IRQS)) || + (d->host_flags & IDE_HFLAG_FORCE_LEGACY_IRQS)) + hwif->irq = port ? 15 : 14; + + hwif->host_flags = d->host_flags; + hwif->pio_mask = d->pio_mask; + + if ((d->host_flags & IDE_HFLAG_SERIALIZE) && hwif->mate) + hwif->mate->serialized = hwif->serialized = 1; + + if (d->host_flags & IDE_HFLAG_IO_32BIT) { + hwif->drives[0].io_32bit = 1; + hwif->drives[1].io_32bit = 1; + } + + if (d->host_flags & IDE_HFLAG_UNMASK_IRQS) { + hwif->drives[0].unmask = 1; + hwif->drives[1].unmask = 1; + } + + hwif->swdma_mask = d->swdma_mask; + hwif->mwdma_mask = d->mwdma_mask; + hwif->ultra_mask = d->udma_mask; + + /* reset DMA masks only for SFF-style DMA controllers */ + if ((d->host_flags && IDE_HFLAG_NO_DMA) == 0 && hwif->dma_base == 0) + hwif->swdma_mask = hwif->mwdma_mask = hwif->ultra_mask = 0; + + if ((d->host_flags & IDE_HFLAG_NO_AUTOTUNE) == 0) { + hwif->drives[0].autotune = 1; + hwif->drives[1].autotune = 1; + } + + if (d->host_flags & IDE_HFLAG_RQSIZE_256) + hwif->rqsize = 256; + + /* call chipset specific routine for each enabled port */ + if (d->init_hwif) + d->init_hwif(hwif); +} + +int ide_device_add_all(u8 *idx, const struct ide_port_info *d) +{ + ide_hwif_t *hwif, *mate = NULL; int i, rc = 0; + for (i = 0; i < MAX_HWIFS; i++) { + if (d == NULL || idx[i] == 0xff) { + mate = NULL; + continue; + } + + hwif = &ide_hwifs[idx[i]]; + + if (d->chipset != ide_etrax100 && (i & 1) && mate) { + hwif->mate = mate; + mate->mate = hwif; + } + + mate = (i & 1) ? NULL : hwif; + + ide_init_port(hwif, i & 1, d); + } + for (i = 0; i < MAX_HWIFS; i++) { if (idx[i] == 0xff) continue; @@ -1362,7 +1436,7 @@ int ide_device_add_all(u8 *idx) } EXPORT_SYMBOL_GPL(ide_device_add_all); -int ide_device_add(u8 idx[4]) +int ide_device_add(u8 idx[4], const struct ide_port_info *d) { u8 idx_all[MAX_HWIFS]; int i; @@ -1370,6 +1444,6 @@ int ide_device_add(u8 idx[4]) for (i = 0; i < MAX_HWIFS; i++) idx_all[i] = (i < 4) ? idx[i] : 0xff; - return ide_device_add_all(idx_all); + return ide_device_add_all(idx_all, d); } EXPORT_SYMBOL_GPL(ide_device_add); diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index fb0c47c8819..eeb0e6a77f5 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -728,7 +728,7 @@ found: idx[0] = index; - ide_device_add(idx); + ide_device_add(idx, NULL); if (hwifp) *hwifp = hwif; diff --git a/drivers/ide/legacy/ali14xx.c b/drivers/ide/legacy/ali14xx.c index e3ea2096804..d4d1a6bea59 100644 --- a/drivers/ide/legacy/ali14xx.c +++ b/drivers/ide/legacy/ali14xx.c @@ -191,9 +191,14 @@ static int __init initRegisters (void) { return t; } +static const struct ide_port_info ali14xx_port_info = { + .chipset = ide_ali14xx, + .host_flags = IDE_HFLAG_NO_DMA | IDE_HFLAG_NO_AUTOTUNE, + .pio_mask = ATA_PIO4, +}; + static int __init ali14xx_probe(void) { - ide_hwif_t *hwif, *mate; static u8 idx[4] = { 0, 1, 0xff, 0xff }; printk(KERN_DEBUG "ali14xx: base=0x%03x, regOn=0x%02x.\n", @@ -205,21 +210,10 @@ static int __init ali14xx_probe(void) return 1; } - hwif = &ide_hwifs[0]; - mate = &ide_hwifs[1]; - - hwif->chipset = ide_ali14xx; - hwif->pio_mask = ATA_PIO4; - hwif->set_pio_mode = &ali14xx_set_pio_mode; - hwif->mate = mate; - - mate->chipset = ide_ali14xx; - mate->pio_mask = ATA_PIO4; - mate->set_pio_mode = &ali14xx_set_pio_mode; - mate->mate = hwif; - mate->channel = 1; + ide_hwifs[0].set_pio_mode = &ali14xx_set_pio_mode; + ide_hwifs[1].set_pio_mode = &ali14xx_set_pio_mode; - ide_device_add(idx); + ide_device_add(idx, &ali14xx_port_info); return 0; } diff --git a/drivers/ide/legacy/buddha.c b/drivers/ide/legacy/buddha.c index dd3d198ade4..8bdb79da17e 100644 --- a/drivers/ide/legacy/buddha.c +++ b/drivers/ide/legacy/buddha.c @@ -232,7 +232,7 @@ fail_base2: } } - ide_device_add(idx); + ide_device_add(idx, NULL); } return 0; diff --git a/drivers/ide/legacy/dtc2278.c b/drivers/ide/legacy/dtc2278.c index 092c04abbe7..7cbf2f1f35f 100644 --- a/drivers/ide/legacy/dtc2278.c +++ b/drivers/ide/legacy/dtc2278.c @@ -86,6 +86,15 @@ static void dtc2278_set_pio_mode(ide_drive_t *drive, const u8 pio) } } +static const struct ide_port_info dtc2278_port_info __initdata = { + .chipset = ide_dtc2278, + .host_flags = IDE_HFLAG_SERIALIZE | + IDE_HFLAG_IO_32BIT | + IDE_HFLAG_NO_DMA | + IDE_HFLAG_NO_AUTOTUNE, + .pio_mask = ATA_PIO4, +}; + static int __init dtc2278_probe(void) { unsigned long flags; @@ -116,29 +125,16 @@ static int __init dtc2278_probe(void) #endif local_irq_restore(flags); - hwif->serialized = 1; hwif->no_io_32bit = 1; /* disallow ->io_32bit changes */ - hwif->chipset = ide_dtc2278; - hwif->pio_mask = ATA_PIO4; hwif->set_pio_mode = &dtc2278_set_pio_mode; hwif->drives[0].no_unmask = 1; hwif->drives[1].no_unmask = 1; - hwif->drives[0].io_32bit = 1; - hwif->drives[1].io_32bit = 1; - hwif->mate = mate; - mate->serialized = 1; mate->no_io_32bit = 1; - mate->chipset = ide_dtc2278; - mate->pio_mask = ATA_PIO4; mate->drives[0].no_unmask = 1; mate->drives[1].no_unmask = 1; - mate->drives[0].io_32bit = 1; - mate->drives[1].io_32bit = 1; - mate->mate = hwif; - mate->channel = 1; - ide_device_add(idx); + ide_device_add(idx, &dtc2278_port_info); return 0; } diff --git a/drivers/ide/legacy/falconide.c b/drivers/ide/legacy/falconide.c index c9bd6bfb1f3..85b69a82825 100644 --- a/drivers/ide/legacy/falconide.c +++ b/drivers/ide/legacy/falconide.c @@ -83,7 +83,7 @@ static int __init falconide_init(void) ide_init_port_data(hwif, index); ide_init_port_hw(hwif, &hw); - ide_device_add(idx); + ide_device_add(idx, NULL); } } diff --git a/drivers/ide/legacy/gayle.c b/drivers/ide/legacy/gayle.c index f67c51a2c84..fc29ce75aff 100644 --- a/drivers/ide/legacy/gayle.c +++ b/drivers/ide/legacy/gayle.c @@ -186,7 +186,7 @@ found: release_mem_region(res_start, res_n); } - ide_device_add(idx); + ide_device_add(idx, NULL); return 0; } diff --git a/drivers/ide/legacy/ht6560b.c b/drivers/ide/legacy/ht6560b.c index 57bc15cddca..a89cd80d812 100644 --- a/drivers/ide/legacy/ht6560b.c +++ b/drivers/ide/legacy/ht6560b.c @@ -305,6 +305,15 @@ int probe_ht6560b = 0; module_param_named(probe, probe_ht6560b, bool, 0); MODULE_PARM_DESC(probe, "probe for HT6560B chipset"); +static const struct ide_port_info ht6560b_port_info __initdata = { + .chipset = ide_ht6560b, + .host_flags = IDE_HFLAG_SERIALIZE | /* is this needed? */ + IDE_HFLAG_NO_DMA | + IDE_HFLAG_NO_AUTOTUNE | + IDE_HFLAG_ABUSE_PREFETCH, + .pio_mask = ATA_PIO5, +}; + static int __init ht6560b_init(void) { ide_hwif_t *hwif, *mate; @@ -328,22 +337,11 @@ static int __init ht6560b_init(void) goto release_region; } - hwif->chipset = ide_ht6560b; hwif->selectproc = &ht6560b_selectproc; - hwif->host_flags = IDE_HFLAG_ABUSE_PREFETCH; - hwif->pio_mask = ATA_PIO5; hwif->set_pio_mode = &ht6560b_set_pio_mode; - hwif->serialized = 1; /* is this needed? */ - hwif->mate = mate; - mate->chipset = ide_ht6560b; mate->selectproc = &ht6560b_selectproc; - mate->host_flags = IDE_HFLAG_ABUSE_PREFETCH; - mate->pio_mask = ATA_PIO5; mate->set_pio_mode = &ht6560b_set_pio_mode; - mate->serialized = 1; /* is this needed? */ - mate->mate = hwif; - mate->channel = 1; /* * Setting default configurations for drives @@ -357,7 +355,7 @@ static int __init ht6560b_init(void) mate->drives[0].drive_data = t; mate->drives[1].drive_data = t; - ide_device_add(idx); + ide_device_add(idx, &ht6560b_port_info); return 0; diff --git a/drivers/ide/legacy/ide_platform.c b/drivers/ide/legacy/ide_platform.c index 7c3231a21d1..7c7f42a1fff 100644 --- a/drivers/ide/legacy/ide_platform.c +++ b/drivers/ide/legacy/ide_platform.c @@ -108,7 +108,7 @@ static int __devinit plat_ide_probe(struct platform_device *pdev) idx[0] = hwif->index; - ide_device_add(idx); + ide_device_add(idx, NULL); platform_set_drvdata(pdev, hwif); diff --git a/drivers/ide/legacy/macide.c b/drivers/ide/legacy/macide.c index 12cd26d0aa2..06df8df857a 100644 --- a/drivers/ide/legacy/macide.c +++ b/drivers/ide/legacy/macide.c @@ -125,7 +125,7 @@ static int __init macide_init(void) hwif->mmio = 1; - ide_device_add(idx); + ide_device_add(idx, NULL); } return 0; diff --git a/drivers/ide/legacy/q40ide.c b/drivers/ide/legacy/q40ide.c index a9c6b0609c5..2f0b34d892a 100644 --- a/drivers/ide/legacy/q40ide.c +++ b/drivers/ide/legacy/q40ide.c @@ -154,7 +154,7 @@ static int __init q40ide_init(void) } } - ide_device_add(idx); + ide_device_add(idx, NULL); return 0; } diff --git a/drivers/ide/legacy/qd65xx.c b/drivers/ide/legacy/qd65xx.c index 37534bb483a..60a6ed1088d 100644 --- a/drivers/ide/legacy/qd65xx.c +++ b/drivers/ide/legacy/qd65xx.c @@ -308,15 +308,10 @@ static int __init qd_testreg(int port) static void __init qd_setup(ide_hwif_t *hwif, int base, int config, unsigned int data0, unsigned int data1) { - hwif->chipset = ide_qd65xx; - hwif->channel = hwif->index; hwif->select_data = base; hwif->config_data = config; hwif->drives[0].drive_data = data0; hwif->drives[1].drive_data = data1; - hwif->drives[0].io_32bit = - hwif->drives[1].io_32bit = 1; - hwif->pio_mask = ATA_PIO4; } /* @@ -356,6 +351,14 @@ static void __exit qd_unsetup(ide_hwif_t *hwif) } */ +static const struct ide_port_info qd65xx_port_info __initdata = { + .chipset = ide_qd65xx, + .host_flags = IDE_HFLAG_IO_32BIT | + IDE_HFLAG_NO_DMA | + IDE_HFLAG_NO_AUTOTUNE, + .pio_mask = ATA_PIO4, +}; + /* * qd_probe: * @@ -397,9 +400,9 @@ static int __init qd_probe(int base) hwif->set_pio_mode = &qd6500_set_pio_mode; - idx[0] = unit; + idx[unit] = unit; - ide_device_add(idx); + ide_device_add(idx, &qd65xx_port_info); return 1; } @@ -431,9 +434,9 @@ static int __init qd_probe(int base) hwif->set_pio_mode = &qd6580_set_pio_mode; - idx[0] = unit; + idx[unit] = unit; - ide_device_add(idx); + ide_device_add(idx, &qd65xx_port_info); outb(QD_DEF_CONTR, QD_CONTROL_PORT); @@ -460,7 +463,7 @@ static int __init qd_probe(int base) idx[0] = 0; idx[1] = 1; - ide_device_add(idx); + ide_device_add(idx, &qd65xx_port_info); outb(QD_DEF_CONTR, QD_CONTROL_PORT); diff --git a/drivers/ide/legacy/umc8672.c b/drivers/ide/legacy/umc8672.c index 26f38ce5877..5696ba02600 100644 --- a/drivers/ide/legacy/umc8672.c +++ b/drivers/ide/legacy/umc8672.c @@ -120,9 +120,14 @@ static void umc_set_pio_mode(ide_drive_t *drive, const u8 pio) spin_unlock_irqrestore(&ide_lock, flags); } +static const struct ide_port_info umc8672_port_info __initdata = { + .chipset = ide_umc8672, + .host_flags = IDE_HFLAG_NO_DMA | IDE_HFLAG_NO_AUTOTUNE, + .pio_mask = ATA_PIO4, +}; + static int __init umc8672_probe(void) { - ide_hwif_t *hwif, *mate; unsigned long flags; static u8 idx[4] = { 0, 1, 0xff, 0xff }; @@ -143,21 +148,10 @@ static int __init umc8672_probe(void) umc_set_speeds (current_speeds); local_irq_restore(flags); - hwif = &ide_hwifs[0]; - mate = &ide_hwifs[1]; - - hwif->chipset = ide_umc8672; - hwif->pio_mask = ATA_PIO4; - hwif->set_pio_mode = &umc_set_pio_mode; - hwif->mate = mate; - - mate->chipset = ide_umc8672; - mate->pio_mask = ATA_PIO4; - mate->set_pio_mode = &umc_set_pio_mode; - mate->mate = hwif; - mate->channel = 1; + ide_hwifs[0].set_pio_mode = &umc_set_pio_mode; + ide_hwifs[1].set_pio_mode = &umc_set_pio_mode; - ide_device_add(idx); + ide_device_add(idx, &umc8672_port_info); return 0; } diff --git a/drivers/ide/mips/au1xxx-ide.c b/drivers/ide/mips/au1xxx-ide.c index 6e98662b119..b80d77a260d 100644 --- a/drivers/ide/mips/au1xxx-ide.c +++ b/drivers/ide/mips/au1xxx-ide.c @@ -548,6 +548,16 @@ static void auide_setup_ports(hw_regs_t *hw, _auide_hwif *ahwif) *ata_regs = ahwif->regbase + (14 << AU1XXX_ATA_REG_OFFSET); } +static const struct ide_port_info au1xxx_port_info = { + .host_flags = IDE_HFLAG_POST_SET_MODE | + IDE_HFLAG_NO_DMA | /* no SFF-style DMA */ + IDE_HFLAG_UNMASK_IRQS, + .pio_mask = ATA_PIO4, +#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA + .mwdma_mask = ATA_MWDMA2, +#endif +}; + static int au_ide_probe(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); @@ -606,21 +616,6 @@ static int au_ide_probe(struct device *dev) hwif->dev = dev; - hwif->ultra_mask = 0x0; /* Disable Ultra DMA */ -#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA - hwif->mwdma_mask = 0x07; /* Multimode-2 DMA */ - hwif->swdma_mask = 0x00; -#else - hwif->mwdma_mask = 0x0; - hwif->swdma_mask = 0x0; -#endif - - hwif->pio_mask = ATA_PIO4; - hwif->host_flags = IDE_HFLAG_POST_SET_MODE; - - hwif->drives[0].unmask = 1; - hwif->drives[1].unmask = 1; - /* hold should be on in all cases */ hwif->hold = 1; @@ -651,13 +646,9 @@ static int au_ide_probe(struct device *dev) hwif->ide_dma_test_irq = &auide_dma_test_irq; hwif->dma_lost_irq = &auide_dma_lost_irq; #endif - hwif->channel = 0; hwif->select_data = 0; /* no chipset-specific code */ hwif->config_data = 0; /* no chipset-specific code */ - hwif->drives[0].autotune = 1; /* 1=autotune, 2=noautotune, 0=default */ - hwif->drives[1].autotune = 1; - hwif->no_io_32bit = 1; auide_hwif.hwif = hwif; @@ -670,7 +661,7 @@ static int au_ide_probe(struct device *dev) idx[0] = hwif->index; - ide_device_add(idx); + ide_device_add(idx, &au1xxx_port_info); dev_set_drvdata(dev, hwif); diff --git a/drivers/ide/mips/swarm.c b/drivers/ide/mips/swarm.c index 8b3959dfa2b..956259fc09b 100644 --- a/drivers/ide/mips/swarm.c +++ b/drivers/ide/mips/swarm.c @@ -129,7 +129,7 @@ static int __devinit swarm_ide_probe(struct device *dev) idx[0] = hwif->index; - ide_device_add(idx); + ide_device_add(idx, NULL); dev_set_drvdata(dev, hwif); diff --git a/drivers/ide/pci/cmd640.c b/drivers/ide/pci/cmd640.c index 7240c20b959..ea0cb500df6 100644 --- a/drivers/ide/pci/cmd640.c +++ b/drivers/ide/pci/cmd640.c @@ -703,6 +703,18 @@ static int pci_conf2(void) return 0; } +static const struct ide_port_info cmd640_port_info __initdata = { + .chipset = ide_cmd640, + .host_flags = IDE_HFLAG_SERIALIZE | + IDE_HFLAG_NO_DMA | + IDE_HFLAG_NO_AUTOTUNE | + IDE_HFLAG_ABUSE_PREFETCH | + IDE_HFLAG_ABUSE_FAST_DEVSEL, +#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED + .pio_mask = ATA_PIO5, +#endif +}; + /* * Probe for a cmd640 chipset, and initialize it if found. */ @@ -760,11 +772,7 @@ static int __init cmd640x_init(void) setup_device_ptrs (); printk("%s: buggy cmd640%c interface on %s, config=0x%02x\n", cmd_hwif0->name, 'a' + cmd640_chip_version - 1, bus_type, cfr); - cmd_hwif0->chipset = ide_cmd640; #ifdef CONFIG_BLK_DEV_CMD640_ENHANCED - cmd_hwif0->host_flags = IDE_HFLAG_ABUSE_PREFETCH | - IDE_HFLAG_ABUSE_FAST_DEVSEL; - cmd_hwif0->pio_mask = ATA_PIO5; cmd_hwif0->set_pio_mode = &cmd640_set_pio_mode; #endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */ @@ -815,23 +823,14 @@ static int __init cmd640x_init(void) * Initialize data for secondary cmd640 port, if enabled */ if (second_port_cmd640) { - cmd_hwif0->serialized = 1; - cmd_hwif1->serialized = 1; - cmd_hwif1->chipset = ide_cmd640; - cmd_hwif0->mate = cmd_hwif1; - cmd_hwif1->mate = cmd_hwif0; - cmd_hwif1->channel = 1; #ifdef CONFIG_BLK_DEV_CMD640_ENHANCED - cmd_hwif1->host_flags = IDE_HFLAG_ABUSE_PREFETCH | - IDE_HFLAG_ABUSE_FAST_DEVSEL; - cmd_hwif1->pio_mask = ATA_PIO5; cmd_hwif1->set_pio_mode = &cmd640_set_pio_mode; #endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */ idx[1] = cmd_hwif1->index; } printk(KERN_INFO "%s: %sserialized, secondary interface %s\n", cmd_hwif1->name, - cmd_hwif0->serialized ? "" : "not ", port2); + second_port_cmd640 ? "" : "not ", port2); /* * Establish initial timings/prefetch for all drives. @@ -876,7 +875,7 @@ static int __init cmd640x_init(void) cmd640_dump_regs(); #endif - ide_device_add(idx); + ide_device_add(idx, &cmd640_port_info); return 1; } diff --git a/drivers/ide/pci/cs5520.c b/drivers/ide/pci/cs5520.c index eb68a9ad0c9..79352866667 100644 --- a/drivers/ide/pci/cs5520.c +++ b/drivers/ide/pci/cs5520.c @@ -180,7 +180,7 @@ static int __devinit cs5520_init_one(struct pci_dev *dev, const struct pci_devic ide_pci_setup_ports(dev, d, 14, &idx[0]); - ide_device_add(idx); + ide_device_add(idx, d); return 0; } diff --git a/drivers/ide/pci/sgiioc4.c b/drivers/ide/pci/sgiioc4.c index 85902074b1f..651845bf1ae 100644 --- a/drivers/ide/pci/sgiioc4.c +++ b/drivers/ide/pci/sgiioc4.c @@ -555,7 +555,6 @@ static void __devinit ide_init_sgiioc4(ide_hwif_t * hwif) { hwif->mmio = 1; - hwif->pio_mask = 0x00; hwif->set_pio_mode = NULL; /* Sets timing for PIO mode */ hwif->set_dma_mode = &sgiioc4_set_dma_mode; hwif->selectproc = NULL;/* Use the default routine to select drive */ @@ -572,8 +571,6 @@ ide_init_sgiioc4(ide_hwif_t * hwif) if (hwif->dma_base == 0) return; - hwif->mwdma_mask = ATA_MWDMA2_ONLY; - hwif->dma_host_set = &sgiioc4_dma_host_set; hwif->dma_setup = &sgiioc4_ide_dma_setup; hwif->dma_start = &sgiioc4_ide_dma_start; @@ -583,6 +580,13 @@ ide_init_sgiioc4(ide_hwif_t * hwif) hwif->dma_timeout = &ide_dma_timeout; } +static const struct ide_port_info sgiioc4_port_info __devinitdata = { + .chipset = ide_pci, + .host_flags = IDE_HFLAG_NO_DMA | /* no SFF-style DMA */ + IDE_HFLAG_NO_AUTOTUNE, + .mwdma_mask = ATA_MWDMA2_ONLY, +}; + static int __devinit sgiioc4_ide_setup_pci_device(struct pci_dev *dev) { @@ -593,6 +597,7 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev) int h; u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; hw_regs_t hw; + struct ide_port_info d = sgiioc4_port_info; /* * Find an empty HWIF; if none available, return -ENOMEM. @@ -641,7 +646,6 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev) ide_init_port_hw(hwif, &hw); hwif->dev = &dev->dev; - hwif->channel = 0; /* Single Channel chip */ /* The IOC4 uses MMIO rather than Port IO. */ default_hwif_mmiops(hwif); @@ -649,15 +653,17 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev) /* Initializing chipset IRQ Registers */ writel(0x03, (void __iomem *)(irqport + IOC4_INTR_SET * 4)); - if (dma_base == 0 || ide_dma_sgiioc4(hwif, dma_base)) + if (dma_base == 0 || ide_dma_sgiioc4(hwif, dma_base)) { printk(KERN_INFO "%s: %s Bus-Master DMA disabled\n", hwif->name, DRV_NAME); + d.mwdma_mask = 0; + } ide_init_sgiioc4(hwif); idx[0] = hwif->index; - if (ide_device_add(idx)) + if (ide_device_add(idx, &d)) return -EIO; return 0; diff --git a/drivers/ide/ppc/mpc8xx.c b/drivers/ide/ppc/mpc8xx.c index 45c1d55e60d..06190b1c4ec 100644 --- a/drivers/ide/ppc/mpc8xx.c +++ b/drivers/ide/ppc/mpc8xx.c @@ -848,7 +848,7 @@ static int __init mpc8xx_ide_probe(void) #endif #endif - ide_device_add(idx); + ide_device_add(idx, NULL); return 0; } diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c index 23112ef68f6..12ac3bfb4f9 100644 --- a/drivers/ide/ppc/pmac.c +++ b/drivers/ide/ppc/pmac.c @@ -412,7 +412,7 @@ kauai_lookup_timing(struct kauai_timing* table, int cycle_time) */ #define IDE_WAKEUP_DELAY (1*HZ) -static void pmac_ide_setup_dma(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif); +static int pmac_ide_setup_dma(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif); static int pmac_ide_build_dmatable(ide_drive_t *drive, struct request *rq); static void pmac_ide_selectproc(ide_drive_t *drive); static void pmac_ide_kauai_selectproc(ide_drive_t *drive); @@ -1003,6 +1003,17 @@ pmac_ide_do_resume(ide_hwif_t *hwif) return 0; } +static const struct ide_port_info pmac_port_info = { + .chipset = ide_pmac, + .host_flags = IDE_HFLAG_SET_PIO_MODE_KEEP_DMA | + IDE_HFLAG_PIO_NO_DOWNGRADE | + IDE_HFLAG_POST_SET_MODE | + IDE_HFLAG_NO_DMA | /* no SFF-style DMA */ + IDE_HFLAG_UNMASK_IRQS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, +}; + /* * Setup, register & probe an IDE channel driven by this driver, this is * called by one of the 2 probe functions (macio or PCI). Note that a channel @@ -1016,23 +1027,28 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif, hw_regs_t *hw) struct device_node *np = pmif->node; const int *bidp; u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; + struct ide_port_info d = pmac_port_info; pmif->cable_80 = 0; pmif->broken_dma = pmif->broken_dma_warn = 0; - if (of_device_is_compatible(np, "shasta-ata")) + if (of_device_is_compatible(np, "shasta-ata")) { pmif->kind = controller_sh_ata6; - else if (of_device_is_compatible(np, "kauai-ata")) + d.udma_mask = ATA_UDMA6; + } else if (of_device_is_compatible(np, "kauai-ata")) { pmif->kind = controller_un_ata6; - else if (of_device_is_compatible(np, "K2-UATA")) + d.udma_mask = ATA_UDMA5; + } else if (of_device_is_compatible(np, "K2-UATA")) { pmif->kind = controller_k2_ata6; - else if (of_device_is_compatible(np, "keylargo-ata")) { - if (strcmp(np->name, "ata-4") == 0) + d.udma_mask = ATA_UDMA5; + } else if (of_device_is_compatible(np, "keylargo-ata")) { + if (strcmp(np->name, "ata-4") == 0) { pmif->kind = controller_kl_ata4; - else + d.udma_mask = ATA_UDMA4; + } else pmif->kind = controller_kl_ata3; - } else if (of_device_is_compatible(np, "heathrow-ata")) + } else if (of_device_is_compatible(np, "heathrow-ata")) { pmif->kind = controller_heathrow; - else { + } else { pmif->kind = controller_ohare; pmif->broken_dma = 1; } @@ -1101,19 +1117,10 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif, hw_regs_t *hw) /* Tell common code _not_ to mess with resources */ hwif->mmio = 1; hwif->hwif_data = pmif; - hw->chipset = ide_pmac; ide_init_port_hw(hwif, hw); hwif->noprobe = pmif->mediabay; hwif->hold = pmif->mediabay; hwif->cbl = pmif->cable_80 ? ATA_CBL_PATA80 : ATA_CBL_PATA40; - hwif->drives[0].unmask = 1; - hwif->drives[1].unmask = 1; - hwif->drives[0].autotune = IDE_TUNE_AUTO; - hwif->drives[1].autotune = IDE_TUNE_AUTO; - hwif->host_flags = IDE_HFLAG_SET_PIO_MODE_KEEP_DMA | - IDE_HFLAG_PIO_NO_DOWNGRADE | - IDE_HFLAG_POST_SET_MODE; - hwif->pio_mask = ATA_PIO4; hwif->set_pio_mode = pmac_ide_set_pio_mode; if (pmif->kind == controller_un_ata6 || pmif->kind == controller_k2_ata6 @@ -1133,14 +1140,16 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif, hw_regs_t *hw) #endif /* CONFIG_PMAC_MEDIABAY */ #ifdef CONFIG_BLK_DEV_IDEDMA_PMAC + if (pmif->cable_80 == 0) + d.udma_mask &= ATA_UDMA2; /* has a DBDMA controller channel */ - if (pmif->dma_regs) - pmac_ide_setup_dma(pmif, hwif); -#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */ + if (pmif->dma_regs == 0 || pmac_ide_setup_dma(pmif, hwif) < 0) +#endif + d.udma_mask = d.mwdma_mask = 0; idx[0] = hwif->index; - ide_device_add(idx); + ide_device_add(idx, &d); return 0; } @@ -1721,8 +1730,7 @@ pmac_ide_dma_lost_irq (ide_drive_t *drive) * Allocate the data structures needed for using DMA with an interface * and fill the proper list of functions pointers */ -static void __devinit -pmac_ide_setup_dma(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif) +static int __devinit pmac_ide_setup_dma(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif) { struct pci_dev *dev = to_pci_dev(hwif->dev); @@ -1730,7 +1738,7 @@ pmac_ide_setup_dma(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif) * DMA routines ... */ if (dev == NULL) - return; + return -ENODEV; /* * Allocate space for the DBDMA commands. * The +2 is +1 for the stop command and +1 to allow for @@ -1743,7 +1751,7 @@ pmac_ide_setup_dma(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif) if (pmif->dma_table_cpu == NULL) { printk(KERN_ERR "%s: unable to allocate DMA command list\n", hwif->name); - return; + return -ENOMEM; } hwif->sg_max_nents = MAX_DCMDS; @@ -1757,29 +1765,7 @@ pmac_ide_setup_dma(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif) hwif->dma_timeout = &ide_dma_timeout; hwif->dma_lost_irq = &pmac_ide_dma_lost_irq; - switch(pmif->kind) { - case controller_sh_ata6: - hwif->ultra_mask = pmif->cable_80 ? 0x7f : 0x07; - hwif->mwdma_mask = 0x07; - hwif->swdma_mask = 0x00; - break; - case controller_un_ata6: - case controller_k2_ata6: - hwif->ultra_mask = pmif->cable_80 ? 0x3f : 0x07; - hwif->mwdma_mask = 0x07; - hwif->swdma_mask = 0x00; - break; - case controller_kl_ata4: - hwif->ultra_mask = pmif->cable_80 ? 0x1f : 0x07; - hwif->mwdma_mask = 0x07; - hwif->swdma_mask = 0x00; - break; - default: - hwif->ultra_mask = 0x00; - hwif->mwdma_mask = 0x07; - hwif->swdma_mask = 0x00; - break; - } + return 0; } #endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */ diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c index 53d9979edc7..634e3f6a960 100644 --- a/drivers/ide/setup-pci.c +++ b/drivers/ide/setup-pci.c @@ -401,20 +401,20 @@ static ide_hwif_t *ide_hwif_configure(struct pci_dev *dev, return hwif; } +#ifdef CONFIG_BLK_DEV_IDEDMA_PCI /** * ide_hwif_setup_dma - configure DMA interface - * @dev: PCI device - * @d: IDE port info * @hwif: IDE interface + * @d: IDE port info * * Set up the DMA base for the interface. Enable the master bits as * necessary and attempt to bring the device DMA into a ready to use * state */ -static void ide_hwif_setup_dma(struct pci_dev *dev, const struct ide_port_info *d, ide_hwif_t *hwif) +void ide_hwif_setup_dma(ide_hwif_t *hwif, const struct ide_port_info *d) { -#ifdef CONFIG_BLK_DEV_IDEDMA_PCI + struct pci_dev *dev = to_pci_dev(hwif->dev); u16 pcicmd; pci_read_config_word(dev, PCI_COMMAND, &pcicmd); @@ -446,8 +446,8 @@ static void ide_hwif_setup_dma(struct pci_dev *dev, const struct ide_port_info * "(BIOS)\n", hwif->name, d->name); } } -#endif /* CONFIG_BLK_DEV_IDEDMA_PCI*/ } +#endif /* CONFIG_BLK_DEV_IDEDMA_PCI */ /** * ide_setup_pci_controller - set up IDE PCI @@ -509,7 +509,7 @@ out: void ide_pci_setup_ports(struct pci_dev *dev, const struct ide_port_info *d, int pciirq, u8 *idx) { int channels = (d->host_flags & IDE_HFLAG_SINGLE) ? 1 : 2, port; - ide_hwif_t *hwif, *mate = NULL; + ide_hwif_t *hwif; u8 tmp; /* @@ -531,71 +531,6 @@ void ide_pci_setup_ports(struct pci_dev *dev, const struct ide_port_info *d, int *(idx + port) = hwif->index; } - - for (port = 0; port < channels; ++port) { - if (*(idx + port) == 0xff) - continue; - - hwif = &ide_hwifs[*(idx + port)]; - - if (mate) { - hwif->mate = mate; - mate->mate = hwif; - } - - hwif->channel = port; - - if (d->init_iops) - d->init_iops(hwif); - - if ((d->host_flags & IDE_HFLAG_NO_DMA) == 0) - ide_hwif_setup_dma(dev, d, hwif); - - if ((!hwif->irq && (d->host_flags & IDE_HFLAG_LEGACY_IRQS)) || - (d->host_flags & IDE_HFLAG_FORCE_LEGACY_IRQS)) - hwif->irq = port ? 15 : 14; - - hwif->host_flags = d->host_flags; - hwif->pio_mask = d->pio_mask; - - if ((d->host_flags & IDE_HFLAG_SERIALIZE) && hwif->mate) - hwif->mate->serialized = hwif->serialized = 1; - - if (d->host_flags & IDE_HFLAG_IO_32BIT) { - hwif->drives[0].io_32bit = 1; - hwif->drives[1].io_32bit = 1; - } - - if (d->host_flags & IDE_HFLAG_UNMASK_IRQS) { - hwif->drives[0].unmask = 1; - hwif->drives[1].unmask = 1; - } - - hwif->swdma_mask = d->swdma_mask; - hwif->mwdma_mask = d->mwdma_mask; - hwif->ultra_mask = d->udma_mask; - - if ((d->host_flags && IDE_HFLAG_NO_DMA) == 0 && - hwif->dma_base == 0) { - hwif->swdma_mask = 0; - hwif->mwdma_mask = 0; - hwif->ultra_mask = 0; - } - - hwif->drives[0].autotune = 1; - hwif->drives[1].autotune = 1; - - if (d->host_flags & IDE_HFLAG_RQSIZE_256) - hwif->rqsize = 256; - - if (d->init_hwif) - /* Call chipset-specific routine - * for each enabled hwif - */ - d->init_hwif(hwif); - - mate = hwif; - } } EXPORT_SYMBOL_GPL(ide_pci_setup_ports); @@ -676,7 +611,7 @@ int ide_setup_pci_device(struct pci_dev *dev, const struct ide_port_info *d) ret = do_ide_setup_pci_device(dev, d, &idx[0], 1); if (ret >= 0) - ide_device_add(idx); + ide_device_add(idx, d); return ret; } @@ -700,7 +635,7 @@ int ide_setup_pci_devices(struct pci_dev *dev1, struct pci_dev *dev2, goto out; } - ide_device_add(idx); + ide_device_add(idx, d); out: return ret; } diff --git a/include/linux/ide.h b/include/linux/ide.h index ec10b2a3bb6..508f7e435cc 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -1016,6 +1016,13 @@ extern int __ide_pci_register_driver(struct pci_driver *driver, struct module *o void ide_pci_setup_ports(struct pci_dev *, const struct ide_port_info *, int, u8 *); void ide_setup_pci_noise(struct pci_dev *, const struct ide_port_info *); +#ifdef CONFIG_BLK_DEV_IDEDMA_PCI +void ide_hwif_setup_dma(ide_hwif_t *, const struct ide_port_info *); +#else +static inline void ide_hwif_setup_dma(ide_hwif_t *hwif, + const struct ide_port_info *d) { } +#endif + extern void default_hwif_iops(ide_hwif_t *); extern void default_hwif_mmiops(ide_hwif_t *); extern void default_hwif_transport(ide_hwif_t *); @@ -1089,6 +1096,8 @@ enum { IDE_HFLAG_CLEAR_SIMPLEX = (1 << 28), /* DSC overlap is unsupported */ IDE_HFLAG_NO_DSC = (1 << 29), + /* don't autotune PIO */ + IDE_HFLAG_NO_AUTOTUNE = (1 << 30), }; #ifdef CONFIG_BLK_DEV_OFFBOARD @@ -1201,8 +1210,8 @@ void ide_unregister_region(struct gendisk *); void ide_undecoded_slave(ide_drive_t *); -int ide_device_add_all(u8 *idx); -int ide_device_add(u8 idx[4]); +int ide_device_add_all(u8 *idx, const struct ide_port_info *); +int ide_device_add(u8 idx[4], const struct ide_port_info *); static inline void *ide_get_hwifdata (ide_hwif_t * hwif) { -- cgit v1.2.3 From bfa14b42a3bd671f0287b3db42e703e86ef27b48 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sat, 2 Feb 2008 19:56:31 +0100 Subject: ide: add ->cable_detect method to ide_hwif_t * Add ->cable_detect method to ide_hwif_t. * Call the new method in ide_init_port() if: - the host supports UDMA modes > UDMA2 ('hwif->ultra_mask & 78') - DMA initialization was successful (if hwif->dma_base is not set ide_init_port() sets hwif->ultra_mask to zero) - "idex=ata66" is not used ('hwif->cbl != ATA_CBL_PATA40_SHORT') * Convert PCI host drivers to use ->cable_detect method. While at it: * Factor out cable detection to separate functions (if not already done). * hpt366.c/it8213.c/slc90e66.c: - don't check cable type if "idex=ata66" is used * pdc202xx_new.c: - add __devinit tag to pdcnew_cable_detect() * pdc202xx_old.c: - rename pdc202xx_old_cable_detect() to pdc2026x_old_cable_detect() - add __devinit tag to pdc2026x_old_cable_detect() Reviewed-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-probe.c | 5 +++ drivers/ide/pci/aec62xx.c | 25 ++++++------- drivers/ide/pci/alim15x3.c | 5 +-- drivers/ide/pci/amd74xx.c | 18 ++++----- drivers/ide/pci/atiixp.c | 6 +-- drivers/ide/pci/cmd64x.c | 5 +-- drivers/ide/pci/cs5535.c | 6 +-- drivers/ide/pci/hpt366.c | 84 +++++++++++++++++++++++------------------- drivers/ide/pci/it8213.c | 21 ++++++----- drivers/ide/pci/it821x.c | 5 +-- drivers/ide/pci/jmicron.c | 6 +-- drivers/ide/pci/pdc202xx_new.c | 8 +--- drivers/ide/pci/pdc202xx_old.c | 10 ++--- drivers/ide/pci/piix.c | 7 +--- drivers/ide/pci/scc_pata.c | 3 +- drivers/ide/pci/serverworks.c | 9 +---- drivers/ide/pci/siimage.c | 5 +-- drivers/ide/pci/sis5513.c | 5 +-- drivers/ide/pci/slc90e66.c | 22 +++++------ drivers/ide/pci/tc86c001.c | 24 +++++++----- drivers/ide/pci/via82cxxx.c | 6 +-- include/linux/ide.h | 2 + 22 files changed, 137 insertions(+), 150 deletions(-) diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 4c3d2cf3be5..c25df65b51f 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -1343,6 +1343,11 @@ static void ide_init_port(ide_hwif_t *hwif, unsigned int port, /* call chipset specific routine for each enabled port */ if (d->init_hwif) d->init_hwif(hwif); + + if (hwif->cable_detect && (hwif->ultra_mask & 0x78)) { + if (hwif->cbl != ATA_CBL_PATA40_SHORT) + hwif->cbl = hwif->cable_detect(hwif); + } } int ide_device_add_all(u8 *idx, const struct ide_port_info *d) diff --git a/drivers/ide/pci/aec62xx.c b/drivers/ide/pci/aec62xx.c index 824df78c701..ca302fcba3a 100644 --- a/drivers/ide/pci/aec62xx.c +++ b/drivers/ide/pci/aec62xx.c @@ -166,6 +166,16 @@ static unsigned int __devinit init_chipset_aec62xx(struct pci_dev *dev, const ch return dev->irq; } +static u8 __devinit atp86x_cable_detect(ide_hwif_t *hwif) +{ + struct pci_dev *dev = to_pci_dev(hwif->dev); + u8 ata66 = 0, mask = hwif->channel ? 0x02 : 0x01; + + pci_read_config_byte(dev, 0x49, &ata66); + + return (ata66 & mask) ? ATA_CBL_PATA40 : ATA_CBL_PATA80; +} + static void __devinit init_hwif_aec62xx(ide_hwif_t *hwif) { struct pci_dev *dev = to_pci_dev(hwif->dev); @@ -174,21 +184,10 @@ static void __devinit init_hwif_aec62xx(ide_hwif_t *hwif) if (dev->device == PCI_DEVICE_ID_ARTOP_ATP850UF) hwif->set_dma_mode = &aec6210_set_mode; - else + else { hwif->set_dma_mode = &aec6260_set_mode; - if (hwif->dma_base == 0) - return; - - if (dev->device == PCI_DEVICE_ID_ARTOP_ATP850UF) - return; - - if (hwif->cbl != ATA_CBL_PATA40_SHORT) { - u8 ata66 = 0, mask = hwif->channel ? 0x02 : 0x01; - - pci_read_config_byte(dev, 0x49, &ata66); - - hwif->cbl = (ata66 & mask) ? ATA_CBL_PATA40 : ATA_CBL_PATA80; + hwif->cable_detect = atp86x_cable_detect; } } diff --git a/drivers/ide/pci/alim15x3.c b/drivers/ide/pci/alim15x3.c index 130cc6e784e..91db990ab75 100644 --- a/drivers/ide/pci/alim15x3.c +++ b/drivers/ide/pci/alim15x3.c @@ -666,13 +666,12 @@ static void __devinit init_hwif_common_ali15x3 (ide_hwif_t *hwif) hwif->set_dma_mode = &ali_set_dma_mode; hwif->udma_filter = &ali_udma_filter; + hwif->cable_detect = ata66_ali15x3; + if (hwif->dma_base == 0) return; hwif->dma_setup = &ali15x3_dma_setup; - - if (hwif->cbl != ATA_CBL_PATA40_SHORT) - hwif->cbl = ata66_ali15x3(hwif); } /** diff --git a/drivers/ide/pci/amd74xx.c b/drivers/ide/pci/amd74xx.c index 8c52bc9eaa5..d6d58d21714 100644 --- a/drivers/ide/pci/amd74xx.c +++ b/drivers/ide/pci/amd74xx.c @@ -199,6 +199,14 @@ static unsigned int __devinit init_chipset_amd74xx(struct pci_dev *dev, return dev->irq; } +static u8 __devinit amd_cable_detect(ide_hwif_t *hwif) +{ + if ((amd_80w >> hwif->channel) & 1) + return ATA_CBL_PATA80; + else + return ATA_CBL_PATA40; +} + static void __devinit init_hwif_amd74xx(ide_hwif_t *hwif) { struct pci_dev *dev = to_pci_dev(hwif->dev); @@ -209,15 +217,7 @@ static void __devinit init_hwif_amd74xx(ide_hwif_t *hwif) hwif->set_pio_mode = &amd_set_pio_mode; hwif->set_dma_mode = &amd_set_drive; - if (!hwif->dma_base) - return; - - if (hwif->cbl != ATA_CBL_PATA40_SHORT) { - if ((amd_80w >> hwif->channel) & 1) - hwif->cbl = ATA_CBL_PATA80; - else - hwif->cbl = ATA_CBL_PATA40; - } + hwif->cable_detect = amd_cable_detect; } #define IDE_HFLAGS_AMD \ diff --git a/drivers/ide/pci/atiixp.c b/drivers/ide/pci/atiixp.c index 648fdf30cdf..b84185b4b68 100644 --- a/drivers/ide/pci/atiixp.c +++ b/drivers/ide/pci/atiixp.c @@ -147,11 +147,7 @@ static void __devinit init_hwif_atiixp(ide_hwif_t *hwif) hwif->set_pio_mode = &atiixp_set_pio_mode; hwif->set_dma_mode = &atiixp_set_dma_mode; - if (!hwif->dma_base) - return; - - if (hwif->cbl != ATA_CBL_PATA40_SHORT) - hwif->cbl = atiixp_cable_detect(hwif); + hwif->cable_detect = atiixp_cable_detect; } static const struct ide_port_info atiixp_pci_info[] __devinitdata = { diff --git a/drivers/ide/pci/cmd64x.c b/drivers/ide/pci/cmd64x.c index 04aa9e59670..181506340d9 100644 --- a/drivers/ide/pci/cmd64x.c +++ b/drivers/ide/pci/cmd64x.c @@ -393,6 +393,8 @@ static void __devinit init_hwif_cmd64x(ide_hwif_t *hwif) hwif->set_pio_mode = &cmd64x_set_pio_mode; hwif->set_dma_mode = &cmd64x_set_dma_mode; + hwif->cable_detect = ata66_cmd64x; + if (!hwif->dma_base) return; @@ -411,9 +413,6 @@ static void __devinit init_hwif_cmd64x(ide_hwif_t *hwif) if (dev->device == PCI_DEVICE_ID_CMD_646 && dev->revision < 5) hwif->ultra_mask = 0x00; - if (hwif->cbl != ATA_CBL_PATA40_SHORT) - hwif->cbl = ata66_cmd64x(hwif); - switch (dev->device) { case PCI_DEVICE_ID_CMD_648: case PCI_DEVICE_ID_CMD_649: diff --git a/drivers/ide/pci/cs5535.c b/drivers/ide/pci/cs5535.c index 50046436a56..d7b5ea992e9 100644 --- a/drivers/ide/pci/cs5535.c +++ b/drivers/ide/pci/cs5535.c @@ -179,11 +179,7 @@ static void __devinit init_hwif_cs5535(ide_hwif_t *hwif) hwif->set_pio_mode = &cs5535_set_pio_mode; hwif->set_dma_mode = &cs5535_set_dma_mode; - if (hwif->dma_base == 0) - return; - - if (hwif->cbl != ATA_CBL_PATA40_SHORT) - hwif->cbl = cs5535_cable_detect(hwif); + hwif->cable_detect = cs5535_cable_detect; } static const struct ide_port_info cs5535_chipset __devinitdata = { diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c index 5623cad569d..7a8c8c7a8b9 100644 --- a/drivers/ide/pci/hpt366.c +++ b/drivers/ide/pci/hpt366.c @@ -1279,12 +1279,55 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const cha return dev->irq; } +static u8 __devinit hpt3xx_cable_detect(ide_hwif_t *hwif) +{ + struct pci_dev *dev = to_pci_dev(hwif->dev); + struct hpt_info *info = pci_get_drvdata(dev); + u8 chip_type = info->chip_type; + u8 scr1 = 0, ata66 = hwif->channel ? 0x01 : 0x02; + + /* + * The HPT37x uses the CBLID pins as outputs for MA15/MA16 + * address lines to access an external EEPROM. To read valid + * cable detect state the pins must be enabled as inputs. + */ + if (chip_type == HPT374 && (PCI_FUNC(dev->devfn) & 1)) { + /* + * HPT374 PCI function 1 + * - set bit 15 of reg 0x52 to enable TCBLID as input + * - set bit 15 of reg 0x56 to enable FCBLID as input + */ + u8 mcr_addr = hwif->select_data + 2; + u16 mcr; + + pci_read_config_word(dev, mcr_addr, &mcr); + pci_write_config_word(dev, mcr_addr, (mcr | 0x8000)); + /* now read cable id register */ + pci_read_config_byte(dev, 0x5a, &scr1); + pci_write_config_word(dev, mcr_addr, mcr); + } else if (chip_type >= HPT370) { + /* + * HPT370/372 and 374 pcifn 0 + * - clear bit 0 of reg 0x5b to enable P/SCBLID as inputs + */ + u8 scr2 = 0; + + pci_read_config_byte(dev, 0x5b, &scr2); + pci_write_config_byte(dev, 0x5b, (scr2 & ~1)); + /* now read cable id register */ + pci_read_config_byte(dev, 0x5a, &scr1); + pci_write_config_byte(dev, 0x5b, scr2); + } else + pci_read_config_byte(dev, 0x5a, &scr1); + + return (scr1 & ata66) ? ATA_CBL_PATA40 : ATA_CBL_PATA80; +} + static void __devinit init_hwif_hpt366(ide_hwif_t *hwif) { struct pci_dev *dev = to_pci_dev(hwif->dev); struct hpt_info *info = pci_get_drvdata(dev); int serialize = HPT_SERIALIZE_IO; - u8 scr1 = 0, ata66 = hwif->channel ? 0x01 : 0x02; u8 chip_type = info->chip_type; u8 new_mcr, old_mcr = 0; @@ -1301,6 +1344,8 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif) hwif->udma_filter = &hpt3xx_udma_filter; hwif->mdma_filter = &hpt3xx_mdma_filter; + hwif->cable_detect = hpt3xx_cable_detect; + /* * HPT3xxN chips have some complications: * @@ -1346,43 +1391,6 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif) if (hwif->dma_base == 0) return; - /* - * The HPT37x uses the CBLID pins as outputs for MA15/MA16 - * address lines to access an external EEPROM. To read valid - * cable detect state the pins must be enabled as inputs. - */ - if (chip_type == HPT374 && (PCI_FUNC(dev->devfn) & 1)) { - /* - * HPT374 PCI function 1 - * - set bit 15 of reg 0x52 to enable TCBLID as input - * - set bit 15 of reg 0x56 to enable FCBLID as input - */ - u8 mcr_addr = hwif->select_data + 2; - u16 mcr; - - pci_read_config_word (dev, mcr_addr, &mcr); - pci_write_config_word(dev, mcr_addr, (mcr | 0x8000)); - /* now read cable id register */ - pci_read_config_byte (dev, 0x5a, &scr1); - pci_write_config_word(dev, mcr_addr, mcr); - } else if (chip_type >= HPT370) { - /* - * HPT370/372 and 374 pcifn 0 - * - clear bit 0 of reg 0x5b to enable P/SCBLID as inputs - */ - u8 scr2 = 0; - - pci_read_config_byte (dev, 0x5b, &scr2); - pci_write_config_byte(dev, 0x5b, (scr2 & ~1)); - /* now read cable id register */ - pci_read_config_byte (dev, 0x5a, &scr1); - pci_write_config_byte(dev, 0x5b, scr2); - } else - pci_read_config_byte (dev, 0x5a, &scr1); - - if (hwif->cbl != ATA_CBL_PATA40_SHORT) - hwif->cbl = (scr1 & ata66) ? ATA_CBL_PATA40 : ATA_CBL_PATA80; - if (chip_type >= HPT374) { hwif->ide_dma_test_irq = &hpt374_ide_dma_test_irq; hwif->ide_dma_end = &hpt374_ide_dma_end; diff --git a/drivers/ide/pci/it8213.c b/drivers/ide/pci/it8213.c index df74e588a53..c781ea6502d 100644 --- a/drivers/ide/pci/it8213.c +++ b/drivers/ide/pci/it8213.c @@ -143,6 +143,16 @@ static void it8213_set_dma_mode(ide_drive_t *drive, const u8 speed) } } +static u8 __devinit it8213_cable_detect(ide_hwif_t *hwif) +{ + struct pci_dev *dev = to_pci_dev(hwif->dev); + u8 reg42h = 0; + + pci_read_config_byte(dev, 0x42, ®42h); + + return (reg42h & 0x02) ? ATA_CBL_PATA40 : ATA_CBL_PATA80; +} + /** * init_hwif_it8213 - set up hwif structs * @hwif: interface to set up @@ -152,19 +162,10 @@ static void it8213_set_dma_mode(ide_drive_t *drive, const u8 speed) static void __devinit init_hwif_it8213(ide_hwif_t *hwif) { - struct pci_dev *dev = to_pci_dev(hwif->dev); - u8 reg42h = 0; - hwif->set_dma_mode = &it8213_set_dma_mode; hwif->set_pio_mode = &it8213_set_pio_mode; - if (!hwif->dma_base) - return; - - pci_read_config_byte(dev, 0x42, ®42h); - - if (hwif->cbl != ATA_CBL_PATA40_SHORT) - hwif->cbl = (reg42h & 0x02) ? ATA_CBL_PATA40 : ATA_CBL_PATA80; + hwif->cable_detect = it8213_cable_detect; } diff --git a/drivers/ide/pci/it821x.c b/drivers/ide/pci/it821x.c index 938d35f35c8..79232c6c1f0 100644 --- a/drivers/ide/pci/it821x.c +++ b/drivers/ide/pci/it821x.c @@ -579,14 +579,13 @@ static void __devinit init_hwif_it821x(ide_hwif_t *hwif) } else hwif->host_flags |= IDE_HFLAG_NO_SET_MODE; + hwif->cable_detect = ata66_it821x; + if (hwif->dma_base == 0) return; hwif->ultra_mask = ATA_UDMA6; hwif->mwdma_mask = ATA_MWDMA2; - - if (hwif->cbl != ATA_CBL_PATA40_SHORT) - hwif->cbl = ata66_it821x(hwif); } static void __devinit it8212_disable_raid(struct pci_dev *dev) diff --git a/drivers/ide/pci/jmicron.c b/drivers/ide/pci/jmicron.c index 8b40f6479c5..ff53c2df7a1 100644 --- a/drivers/ide/pci/jmicron.c +++ b/drivers/ide/pci/jmicron.c @@ -111,11 +111,7 @@ static void __devinit init_hwif_jmicron(ide_hwif_t *hwif) hwif->set_pio_mode = &jmicron_set_pio_mode; hwif->set_dma_mode = &jmicron_set_dma_mode; - if (hwif->dma_base == 0) - return; - - if (hwif->cbl != ATA_CBL_PATA40_SHORT) - hwif->cbl = ata66_jmicron(hwif); + hwif->cable_detect = ata66_jmicron; } static const struct ide_port_info jmicron_chipset __devinitdata = { diff --git a/drivers/ide/pci/pdc202xx_new.c b/drivers/ide/pci/pdc202xx_new.c index bb29db03540..b552960dc1c 100644 --- a/drivers/ide/pci/pdc202xx_new.c +++ b/drivers/ide/pci/pdc202xx_new.c @@ -197,7 +197,7 @@ static void pdcnew_set_pio_mode(ide_drive_t *drive, const u8 pio) } } -static u8 pdcnew_cable_detect(ide_hwif_t *hwif) +static u8 __devinit pdcnew_cable_detect(ide_hwif_t *hwif) { if (get_indexed_reg(hwif, 0x0b) & 0x04) return ATA_CBL_PATA40; @@ -456,11 +456,7 @@ static void __devinit init_hwif_pdc202new(ide_hwif_t *hwif) hwif->quirkproc = &pdcnew_quirkproc; hwif->resetproc = &pdcnew_reset; - if (hwif->dma_base == 0) - return; - - if (hwif->cbl != ATA_CBL_PATA40_SHORT) - hwif->cbl = pdcnew_cable_detect(hwif); + hwif->cable_detect = pdcnew_cable_detect; } static struct pci_dev * __devinit pdc20270_get_dev2(struct pci_dev *dev) diff --git a/drivers/ide/pci/pdc202xx_old.c b/drivers/ide/pci/pdc202xx_old.c index 31a1308414a..41853a1bc91 100644 --- a/drivers/ide/pci/pdc202xx_old.c +++ b/drivers/ide/pci/pdc202xx_old.c @@ -140,7 +140,7 @@ static void pdc202xx_set_pio_mode(ide_drive_t *drive, const u8 pio) pdc202xx_set_mode(drive, XFER_PIO_0 + pio); } -static u8 pdc202xx_old_cable_detect (ide_hwif_t *hwif) +static u8 __devinit pdc2026x_old_cable_detect(ide_hwif_t *hwif) { struct pci_dev *dev = to_pci_dev(hwif->dev); u16 CIS = 0, mask = (hwif->channel) ? (1<<11) : (1<<10); @@ -311,9 +311,12 @@ static void __devinit init_hwif_pdc202xx(ide_hwif_t *hwif) hwif->quirkproc = &pdc202xx_quirkproc; - if (dev->device != PCI_DEVICE_ID_PROMISE_20246) + if (dev->device != PCI_DEVICE_ID_PROMISE_20246) { hwif->resetproc = &pdc202xx_reset; + hwif->cable_detect = pdc2026x_old_cable_detect; + } + if (hwif->dma_base == 0) return; @@ -321,9 +324,6 @@ static void __devinit init_hwif_pdc202xx(ide_hwif_t *hwif) hwif->dma_timeout = &pdc202xx_dma_timeout; if (dev->device != PCI_DEVICE_ID_PROMISE_20246) { - if (hwif->cbl != ATA_CBL_PATA40_SHORT) - hwif->cbl = pdc202xx_old_cable_detect(hwif); - hwif->dma_start = &pdc202xx_old_ide_dma_start; hwif->ide_dma_end = &pdc202xx_old_ide_dma_end; } diff --git a/drivers/ide/pci/piix.c b/drivers/ide/pci/piix.c index c1a6b68337d..039f442c9ea 100644 --- a/drivers/ide/pci/piix.c +++ b/drivers/ide/pci/piix.c @@ -290,14 +290,11 @@ static void __devinit init_hwif_piix(ide_hwif_t *hwif) hwif->set_pio_mode = &piix_set_pio_mode; hwif->set_dma_mode = &piix_set_dma_mode; + hwif->cable_detect = piix_cable_detect; + if (!hwif->dma_base) return; - if (hwif->ultra_mask & 0x78) { - if (hwif->cbl != ATA_CBL_PATA40_SHORT) - hwif->cbl = piix_cable_detect(hwif); - } - if (no_piix_dma) hwif->ultra_mask = hwif->mwdma_mask = hwif->swdma_mask = 0; } diff --git a/drivers/ide/pci/scc_pata.c b/drivers/ide/pci/scc_pata.c index dcd44d7c084..085c1b58a99 100644 --- a/drivers/ide/pci/scc_pata.c +++ b/drivers/ide/pci/scc_pata.c @@ -683,8 +683,7 @@ static void __devinit init_hwif_scc(ide_hwif_t *hwif) else hwif->ultra_mask = ATA_UDMA5; /* 100MHz */ - if (hwif->cbl != ATA_CBL_PATA40_SHORT) - hwif->cbl = scc_cable_detect(hwif); + hwif->cable_detect = scc_cable_detect; } #define DECLARE_SCC_DEV(name_str) \ diff --git a/drivers/ide/pci/serverworks.c b/drivers/ide/pci/serverworks.c index f495253b7d4..d9687a431c5 100644 --- a/drivers/ide/pci/serverworks.c +++ b/drivers/ide/pci/serverworks.c @@ -346,13 +346,8 @@ static void __devinit init_hwif_svwks (ide_hwif_t *hwif) hwif->set_dma_mode = &svwks_set_dma_mode; hwif->udma_filter = &svwks_udma_filter; - if (!hwif->dma_base) - return; - - if (dev->device != PCI_DEVICE_ID_SERVERWORKS_OSB4IDE) { - if (hwif->cbl != ATA_CBL_PATA40_SHORT) - hwif->cbl = ata66_svwks(hwif); - } + if (dev->device != PCI_DEVICE_ID_SERVERWORKS_OSB4IDE) + hwif->cable_detect = ata66_svwks; } #define IDE_HFLAGS_SVWKS \ diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c index 4877bc8cd59..accac8342e1 100644 --- a/drivers/ide/pci/siimage.c +++ b/drivers/ide/pci/siimage.c @@ -827,15 +827,14 @@ static void __devinit init_hwif_siimage(ide_hwif_t *hwif) } else hwif->udma_filter = &sil_pata_udma_filter; + hwif->cable_detect = ata66_siimage; + if (hwif->dma_base == 0) return; if (sata) hwif->host_flags |= IDE_HFLAG_NO_ATAPI_DMA; - if (hwif->cbl != ATA_CBL_PATA40_SHORT) - hwif->cbl = ata66_siimage(hwif); - if (hwif->mmio) { hwif->ide_dma_test_irq = &siimage_mmio_ide_dma_test_irq; } else { diff --git a/drivers/ide/pci/sis5513.c b/drivers/ide/pci/sis5513.c index 2a461de22aa..cb5c6fc6f3f 100644 --- a/drivers/ide/pci/sis5513.c +++ b/drivers/ide/pci/sis5513.c @@ -565,13 +565,12 @@ static void __devinit init_hwif_sis5513 (ide_hwif_t *hwif) if (chipset_family >= ATA_133) hwif->udma_filter = sis5513_ata133_udma_filter; + hwif->cable_detect = ata66_sis5513; + if (hwif->dma_base == 0) return; hwif->ultra_mask = udma_rates[chipset_family]; - - if (hwif->cbl != ATA_CBL_PATA40_SHORT) - hwif->cbl = ata66_sis5513(hwif); } static const struct ide_port_info sis5513_chipset __devinitdata = { diff --git a/drivers/ide/pci/slc90e66.c b/drivers/ide/pci/slc90e66.c index a6cf810c469..427f95b25fd 100644 --- a/drivers/ide/pci/slc90e66.c +++ b/drivers/ide/pci/slc90e66.c @@ -118,23 +118,23 @@ static void slc90e66_set_dma_mode(ide_drive_t *drive, const u8 speed) } } -static void __devinit init_hwif_slc90e66 (ide_hwif_t *hwif) +static u8 __devinit slc90e66_cable_detect(ide_hwif_t *hwif) { struct pci_dev *dev = to_pci_dev(hwif->dev); - u8 reg47 = 0; - u8 mask = hwif->channel ? 0x01 : 0x02; /* bit0:Primary */ - - hwif->set_pio_mode = &slc90e66_set_pio_mode; - hwif->set_dma_mode = &slc90e66_set_dma_mode; + u8 reg47 = 0, mask = hwif->channel ? 0x01 : 0x02; pci_read_config_byte(dev, 0x47, ®47); - if (hwif->dma_base == 0) - return; + /* bit[0(1)]: 0:80, 1:40 */ + return (reg47 & mask) ? ATA_CBL_PATA40 : ATA_CBL_PATA80; +} + +static void __devinit init_hwif_slc90e66(ide_hwif_t *hwif) +{ + hwif->set_pio_mode = &slc90e66_set_pio_mode; + hwif->set_dma_mode = &slc90e66_set_dma_mode; - if (hwif->cbl != ATA_CBL_PATA40_SHORT) - /* bit[0(1)]: 0:80, 1:40 */ - hwif->cbl = (reg47 & mask) ? ATA_CBL_PATA40 : ATA_CBL_PATA80; + hwif->cable_detect = slc90e66_cable_detect; } static const struct ide_port_info slc90e66_chipset __devinitdata = { diff --git a/drivers/ide/pci/tc86c001.c b/drivers/ide/pci/tc86c001.c index 9fbbb4f2dd5..2ef2ed2f2b3 100644 --- a/drivers/ide/pci/tc86c001.c +++ b/drivers/ide/pci/tc86c001.c @@ -160,6 +160,19 @@ static int tc86c001_busproc(ide_drive_t *drive, int state) return 0; } +static u8 __devinit tc86c001_cable_detect(ide_hwif_t *hwif) +{ + struct pci_dev *dev = to_pci_dev(hwif->dev); + unsigned long sc_base = pci_resource_start(dev, 5); + u16 scr1 = inw(sc_base + 0x00); + + /* + * System Control 1 Register bit 13 (PDIAGN): + * 0=80-pin cable, 1=40-pin cable + */ + return (scr1 & 0x2000) ? ATA_CBL_PATA40 : ATA_CBL_PATA80; +} + static void __devinit init_hwif_tc86c001(ide_hwif_t *hwif) { struct pci_dev *dev = to_pci_dev(hwif->dev); @@ -183,6 +196,8 @@ static void __devinit init_hwif_tc86c001(ide_hwif_t *hwif) hwif->busproc = &tc86c001_busproc; + hwif->cable_detect = tc86c001_cable_detect; + if (!hwif->dma_base) return; @@ -196,15 +211,6 @@ static void __devinit init_hwif_tc86c001(ide_hwif_t *hwif) hwif->rqsize = 0xffff; hwif->dma_start = &tc86c001_dma_start; - - if (hwif->cbl != ATA_CBL_PATA40_SHORT) { - /* - * System Control 1 Register bit 13 (PDIAGN): - * 0=80-pin cable, 1=40-pin cable - */ - scr1 = inw(sc_base + 0x00); - hwif->cbl = (scr1 & 0x2000) ? ATA_CBL_PATA40 : ATA_CBL_PATA80; - } } static unsigned int __devinit init_chipset_tc86c001(struct pci_dev *dev, diff --git a/drivers/ide/pci/via82cxxx.c b/drivers/ide/pci/via82cxxx.c index 24cb9047fb4..c58a279d6b2 100644 --- a/drivers/ide/pci/via82cxxx.c +++ b/drivers/ide/pci/via82cxxx.c @@ -424,11 +424,7 @@ static void __devinit init_hwif_via82cxxx(ide_hwif_t *hwif) hwif->set_pio_mode = &via_set_pio_mode; hwif->set_dma_mode = &via_set_drive; - if (!hwif->dma_base) - return; - - if (hwif->cbl != ATA_CBL_PATA40_SHORT) - hwif->cbl = via82cxxx_cable_detect(hwif); + hwif->cable_detect = via82cxxx_cable_detect; } static const struct ide_port_info via82cxxx_chipset __devinitdata = { diff --git a/include/linux/ide.h b/include/linux/ide.h index 508f7e435cc..29e35980d7e 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -535,6 +535,8 @@ typedef struct hwif_s { u8 (*mdma_filter)(ide_drive_t *); u8 (*udma_filter)(ide_drive_t *); + u8 (*cable_detect)(struct hwif_s *); + void (*ata_input_data)(ide_drive_t *, void *, u32); void (*ata_output_data)(ide_drive_t *, void *, u32); -- cgit v1.2.3 From 78829dd9224b62e2092a681afaee1bda4d0cb93b Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sat, 2 Feb 2008 19:56:33 +0100 Subject: ide: remove needless includes from PCI host drivers Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/pci/aec62xx.c | 1 - drivers/ide/pci/alim15x3.c | 1 - drivers/ide/pci/amd74xx.c | 3 --- drivers/ide/pci/atiixp.c | 4 ---- drivers/ide/pci/cmd640.c | 4 ---- drivers/ide/pci/cmd64x.c | 1 - drivers/ide/pci/cs5520.c | 10 ---------- drivers/ide/pci/cs5530.c | 8 +------- drivers/ide/pci/cy82c693.c | 1 - drivers/ide/pci/delkin_cb.c | 5 ++--- drivers/ide/pci/generic.c | 7 ------- drivers/ide/pci/hpt34x.c | 7 ------- drivers/ide/pci/hpt366.c | 5 ----- drivers/ide/pci/it8213.c | 3 --- drivers/ide/pci/it821x.c | 3 --- drivers/ide/pci/jmicron.c | 3 --- drivers/ide/pci/ns87415.c | 4 ---- drivers/ide/pci/opti621.c | 5 ----- drivers/ide/pci/pdc202xx_new.c | 6 ------ drivers/ide/pci/pdc202xx_old.c | 5 ----- drivers/ide/pci/piix.c | 2 -- drivers/ide/pci/rz1000.c | 7 ------- drivers/ide/pci/sc1200.c | 8 +------- drivers/ide/pci/serverworks.c | 2 -- drivers/ide/pci/sgiioc4.c | 2 -- drivers/ide/pci/siimage.c | 1 - drivers/ide/pci/sis5513.c | 9 --------- drivers/ide/pci/sl82c105.c | 6 ------ drivers/ide/pci/slc90e66.c | 4 ---- drivers/ide/pci/triflex.c | 5 ----- drivers/ide/pci/trm290.c | 2 -- drivers/ide/pci/via82cxxx.c | 4 ---- 32 files changed, 4 insertions(+), 134 deletions(-) diff --git a/drivers/ide/pci/aec62xx.c b/drivers/ide/pci/aec62xx.c index ca302fcba3a..cfb3265bc1a 100644 --- a/drivers/ide/pci/aec62xx.c +++ b/drivers/ide/pci/aec62xx.c @@ -7,7 +7,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/ide/pci/alim15x3.c b/drivers/ide/pci/alim15x3.c index 91db990ab75..b3b6f514ce2 100644 --- a/drivers/ide/pci/alim15x3.c +++ b/drivers/ide/pci/alim15x3.c @@ -31,7 +31,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/ide/pci/amd74xx.c b/drivers/ide/pci/amd74xx.c index d6d58d21714..2ef890ce809 100644 --- a/drivers/ide/pci/amd74xx.c +++ b/drivers/ide/pci/amd74xx.c @@ -17,12 +17,9 @@ #include #include -#include -#include #include #include #include -#include #include "ide-timing.h" diff --git a/drivers/ide/pci/atiixp.c b/drivers/ide/pci/atiixp.c index b84185b4b68..7e037c880cb 100644 --- a/drivers/ide/pci/atiixp.c +++ b/drivers/ide/pci/atiixp.c @@ -6,15 +6,11 @@ #include #include #include -#include #include #include #include -#include #include -#include - #define ATIIXP_IDE_PIO_TIMING 0x40 #define ATIIXP_IDE_MDMA_TIMING 0x44 #define ATIIXP_IDE_PIO_CONTROL 0x48 diff --git a/drivers/ide/pci/cmd640.c b/drivers/ide/pci/cmd640.c index ea0cb500df6..bd24dad3cfc 100644 --- a/drivers/ide/pci/cmd640.c +++ b/drivers/ide/pci/cmd640.c @@ -103,10 +103,6 @@ #include #include #include -#include -#include -#include -#include #include #include #include diff --git a/drivers/ide/pci/cmd64x.c b/drivers/ide/pci/cmd64x.c index 181506340d9..edabe6299ef 100644 --- a/drivers/ide/pci/cmd64x.c +++ b/drivers/ide/pci/cmd64x.c @@ -13,7 +13,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/ide/pci/cs5520.c b/drivers/ide/pci/cs5520.c index 79352866667..0be1a824102 100644 --- a/drivers/ide/pci/cs5520.c +++ b/drivers/ide/pci/cs5520.c @@ -35,22 +35,12 @@ #include #include #include -#include -#include -#include -#include -#include #include - -#include #include #include #include #include -#include -#include - struct pio_clocks { int address; diff --git a/drivers/ide/pci/cs5530.c b/drivers/ide/pci/cs5530.c index 765aac397ce..941a1344820 100644 --- a/drivers/ide/pci/cs5530.c +++ b/drivers/ide/pci/cs5530.c @@ -15,18 +15,12 @@ #include #include #include -#include -#include -#include -#include -#include #include -#include #include #include #include + #include -#include /* * Here are the standard PIO mode 0-4 timings for each "format". diff --git a/drivers/ide/pci/cy82c693.c b/drivers/ide/pci/cy82c693.c index 50100ac8770..724cbacf4e5 100644 --- a/drivers/ide/pci/cy82c693.c +++ b/drivers/ide/pci/cy82c693.c @@ -45,7 +45,6 @@ #include #include #include -#include #include #include diff --git a/drivers/ide/pci/delkin_cb.c b/drivers/ide/pci/delkin_cb.c index 27e47fc9710..3fdf5e5a6fb 100644 --- a/drivers/ide/pci/delkin_cb.c +++ b/drivers/ide/pci/delkin_cb.c @@ -16,15 +16,14 @@ * License. See the file COPYING in the main directory of this archive for * more details. */ -#include + #include #include -#include -#include #include #include #include #include + #include /* diff --git a/drivers/ide/pci/generic.c b/drivers/ide/pci/generic.c index 59ebe84f105..9262a9174b4 100644 --- a/drivers/ide/pci/generic.c +++ b/drivers/ide/pci/generic.c @@ -22,18 +22,11 @@ #include #include #include -#include -#include -#include -#include -#include #include #include #include #include -#include - static int ide_generic_all; /* Set to claim all devices */ /* diff --git a/drivers/ide/pci/hpt34x.c b/drivers/ide/pci/hpt34x.c index 25dbb814822..9f01da46b01 100644 --- a/drivers/ide/pci/hpt34x.c +++ b/drivers/ide/pci/hpt34x.c @@ -26,20 +26,13 @@ #include #include #include -#include -#include -#include #include -#include #include #include #include #include #include -#include -#include - #define HPT343_DEBUG_DRIVE_INFO 0 static void hpt34x_set_mode(ide_drive_t *drive, const u8 speed) diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c index 7a8c8c7a8b9..d0f7bb8b8ad 100644 --- a/drivers/ide/pci/hpt366.c +++ b/drivers/ide/pci/hpt366.c @@ -121,12 +121,8 @@ #include #include #include -#include -#include -#include #include #include - #include #include #include @@ -134,7 +130,6 @@ #include #include -#include /* various tuning parameters */ #define HPT_RESET_STATE_ENGINE diff --git a/drivers/ide/pci/it8213.c b/drivers/ide/pci/it8213.c index c781ea6502d..e3427eaab43 100644 --- a/drivers/ide/pci/it8213.c +++ b/drivers/ide/pci/it8213.c @@ -10,13 +10,10 @@ #include #include #include -#include #include #include #include -#include - /** * it8213_set_pio_mode - set host controller for PIO mode * @drive: drive diff --git a/drivers/ide/pci/it821x.c b/drivers/ide/pci/it821x.c index 79232c6c1f0..1597f0cc1bf 100644 --- a/drivers/ide/pci/it821x.c +++ b/drivers/ide/pci/it821x.c @@ -63,13 +63,10 @@ #include #include #include -#include #include #include #include -#include - struct it821x_dev { unsigned int smart:1, /* Are we in smart raid mode */ diff --git a/drivers/ide/pci/jmicron.c b/drivers/ide/pci/jmicron.c index ff53c2df7a1..a56bcb4f22f 100644 --- a/drivers/ide/pci/jmicron.c +++ b/drivers/ide/pci/jmicron.c @@ -8,13 +8,10 @@ #include #include #include -#include #include #include #include -#include - typedef enum { PORT_PATA0 = 0, PORT_PATA1 = 1, diff --git a/drivers/ide/pci/ns87415.c b/drivers/ide/pci/ns87415.c index fc9eee9ccac..bf0d3b2931f 100644 --- a/drivers/ide/pci/ns87415.c +++ b/drivers/ide/pci/ns87415.c @@ -10,11 +10,7 @@ #include #include #include -#include -#include -#include #include -#include #include #include #include diff --git a/drivers/ide/pci/opti621.c b/drivers/ide/pci/opti621.c index 0ce92d32303..1e532c9a97f 100644 --- a/drivers/ide/pci/opti621.c +++ b/drivers/ide/pci/opti621.c @@ -87,11 +87,6 @@ #include #include #include -#include -#include -#include -#include -#include #include #include #include diff --git a/drivers/ide/pci/pdc202xx_new.c b/drivers/ide/pci/pdc202xx_new.c index b552960dc1c..1c8cb7797a4 100644 --- a/drivers/ide/pci/pdc202xx_new.c +++ b/drivers/ide/pci/pdc202xx_new.c @@ -19,18 +19,12 @@ #include #include #include -#include -#include -#include -#include #include -#include #include #include #include #include -#include #ifdef CONFIG_PPC_PMAC #include diff --git a/drivers/ide/pci/pdc202xx_old.c b/drivers/ide/pci/pdc202xx_old.c index 41853a1bc91..9ee72c99d08 100644 --- a/drivers/ide/pci/pdc202xx_old.c +++ b/drivers/ide/pci/pdc202xx_old.c @@ -32,18 +32,13 @@ #include #include #include -#include -#include -#include #include #include -#include #include #include #include #include -#include #define PDC202XX_DEBUG_DRIVE_INFO 0 diff --git a/drivers/ide/pci/piix.c b/drivers/ide/pci/piix.c index 039f442c9ea..decef0f4767 100644 --- a/drivers/ide/pci/piix.c +++ b/drivers/ide/pci/piix.c @@ -47,11 +47,9 @@ #include #include #include -#include #include #include #include -#include #include #include diff --git a/drivers/ide/pci/rz1000.c b/drivers/ide/pci/rz1000.c index 7ed6625819d..dd0d18ba002 100644 --- a/drivers/ide/pci/rz1000.c +++ b/drivers/ide/pci/rz1000.c @@ -16,18 +16,11 @@ #include #include #include -#include -#include -#include -#include -#include #include #include #include #include -#include - static void __devinit init_hwif_rz1000 (ide_hwif_t *hwif) { struct pci_dev *dev = to_pci_dev(hwif->dev); diff --git a/drivers/ide/pci/sc1200.c b/drivers/ide/pci/sc1200.c index af499a60eb3..561aa47c772 100644 --- a/drivers/ide/pci/sc1200.c +++ b/drivers/ide/pci/sc1200.c @@ -14,19 +14,13 @@ #include #include #include -#include -#include -#include -#include -#include #include -#include #include #include #include #include + #include -#include #define SC1200_REV_A 0x00 #define SC1200_REV_B1 0x01 diff --git a/drivers/ide/pci/serverworks.c b/drivers/ide/pci/serverworks.c index d9687a431c5..c11880b0709 100644 --- a/drivers/ide/pci/serverworks.c +++ b/drivers/ide/pci/serverworks.c @@ -31,12 +31,10 @@ #include #include #include -#include #include #include #include #include -#include #include diff --git a/drivers/ide/pci/sgiioc4.c b/drivers/ide/pci/sgiioc4.c index 651845bf1ae..054626497be 100644 --- a/drivers/ide/pci/sgiioc4.c +++ b/drivers/ide/pci/sgiioc4.c @@ -25,8 +25,6 @@ #include #include #include -#include -#include #include #include #include diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c index accac8342e1..5c1bd7928c2 100644 --- a/drivers/ide/pci/siimage.c +++ b/drivers/ide/pci/siimage.c @@ -39,7 +39,6 @@ #include #include #include -#include #include #include #include diff --git a/drivers/ide/pci/sis5513.c b/drivers/ide/pci/sis5513.c index cb5c6fc6f3f..512bb4c1fd5 100644 --- a/drivers/ide/pci/sis5513.c +++ b/drivers/ide/pci/sis5513.c @@ -47,20 +47,11 @@ #include #include #include -#include -#include -#include -#include -#include #include - -#include #include #include #include -#include - #include "ide-timing.h" /* registers layout and init values are chipset family dependant */ diff --git a/drivers/ide/pci/sl82c105.c b/drivers/ide/pci/sl82c105.c index da13a1298ad..ee261ae15b6 100644 --- a/drivers/ide/pci/sl82c105.c +++ b/drivers/ide/pci/sl82c105.c @@ -17,17 +17,11 @@ #include #include #include -#include -#include -#include -#include -#include #include #include #include #include -#include #undef DEBUG diff --git a/drivers/ide/pci/slc90e66.c b/drivers/ide/pci/slc90e66.c index 427f95b25fd..65f4c2ffaa5 100644 --- a/drivers/ide/pci/slc90e66.c +++ b/drivers/ide/pci/slc90e66.c @@ -10,15 +10,11 @@ #include #include #include -#include #include #include #include -#include #include -#include - static DEFINE_SPINLOCK(slc90e66_lock); static void slc90e66_set_pio_mode(ide_drive_t *drive, const u8 pio) diff --git a/drivers/ide/pci/triflex.c b/drivers/ide/pci/triflex.c index 852b7269373..a67d02a3f96 100644 --- a/drivers/ide/pci/triflex.c +++ b/drivers/ide/pci/triflex.c @@ -28,11 +28,6 @@ #include #include #include -#include -#include -#include -#include -#include #include #include #include diff --git a/drivers/ide/pci/trm290.c b/drivers/ide/pci/trm290.c index d9ebb698953..e3d58c9f05e 100644 --- a/drivers/ide/pci/trm290.c +++ b/drivers/ide/pci/trm290.c @@ -131,14 +131,12 @@ #include #include #include -#include #include #include #include #include #include #include -#include #include #include diff --git a/drivers/ide/pci/via82cxxx.c b/drivers/ide/pci/via82cxxx.c index c58a279d6b2..f3f79f80581 100644 --- a/drivers/ide/pci/via82cxxx.c +++ b/drivers/ide/pci/via82cxxx.c @@ -26,15 +26,11 @@ #include #include -#include -#include #include #include #include #include -#include - #ifdef CONFIG_PPC_CHRP #include #endif -- cgit v1.2.3 From 30d67099385dd837b252a604f1593735c5559e13 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Sat, 2 Feb 2008 19:56:33 +0100 Subject: ide-floppy: convert to generic packet commands Replace the ide-floppy packet commands opcode defines with the generic ones. Add a missing GPCMD_WRITE_12 (opcode 0xaa) to the generic ones in cdrom.h. The last one can be found in the current version of INF-8090, p.905. [ Bart: Tejun's libata patch also adding GPCMD_WRITE_12 got merged first ] Signed-off-by: Borislav Petkov Cc: Jens Axboe Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-floppy.c | 44 ++++++++++++-------------------------------- 1 file changed, 12 insertions(+), 32 deletions(-) diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 3512637ae8d..e4ebb216654 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -272,26 +272,6 @@ typedef struct ide_floppy_obj { #define IDEFLOPPY_CLIK_DRIVE 4 /* Avoid commands not supported in Clik drive */ #define IDEFLOPPY_ZIP_DRIVE 5 /* Requires BH algorithm for packets */ -/* - * ATAPI floppy drive packet commands - */ -#define IDEFLOPPY_FORMAT_UNIT_CMD 0x04 -#define IDEFLOPPY_INQUIRY_CMD 0x12 -#define IDEFLOPPY_MODE_SELECT_CMD 0x55 -#define IDEFLOPPY_MODE_SENSE_CMD 0x5a -#define IDEFLOPPY_READ10_CMD 0x28 -#define IDEFLOPPY_READ12_CMD 0xa8 -#define IDEFLOPPY_READ_CAPACITY_CMD 0x23 -#define IDEFLOPPY_REQUEST_SENSE_CMD 0x03 -#define IDEFLOPPY_PREVENT_REMOVAL_CMD 0x1e -#define IDEFLOPPY_SEEK_CMD 0x2b -#define IDEFLOPPY_START_STOP_CMD 0x1b -#define IDEFLOPPY_TEST_UNIT_READY_CMD 0x00 -#define IDEFLOPPY_VERIFY_CMD 0x2f -#define IDEFLOPPY_WRITE10_CMD 0x2a -#define IDEFLOPPY_WRITE12_CMD 0xaa -#define IDEFLOPPY_WRITE_VERIFY_CMD 0x2e - /* * Defines for the mode sense command */ @@ -696,8 +676,8 @@ static void idefloppy_init_pc (idefloppy_pc_t *pc) static void idefloppy_create_request_sense_cmd (idefloppy_pc_t *pc) { - idefloppy_init_pc(pc); - pc->c[0] = IDEFLOPPY_REQUEST_SENSE_CMD; + idefloppy_init_pc(pc); + pc->c[0] = GPCMD_REQUEST_SENSE; pc->c[4] = 255; pc->request_transfer = 18; pc->callback = &idefloppy_request_sense_callback; @@ -762,7 +742,7 @@ static ide_startstop_t idefloppy_pc_intr (ide_drive_t *drive) debug_log(KERN_INFO "ide-floppy: %s: I/O error\n", drive->name); rq->errors++; - if (pc->c[0] == IDEFLOPPY_REQUEST_SENSE_CMD) { + if (pc->c[0] == GPCMD_REQUEST_SENSE) { printk(KERN_ERR "ide-floppy: I/O error in " "request sense command\n"); return ide_do_reset(drive); @@ -962,7 +942,7 @@ static ide_startstop_t idefloppy_issue_pc (ide_drive_t *drive, idefloppy_pc_t *p u8 dma; if (floppy->failed_pc == NULL && - pc->c[0] != IDEFLOPPY_REQUEST_SENSE_CMD) + pc->c[0] != GPCMD_REQUEST_SENSE) floppy->failed_pc = pc; /* Set the current packet command */ floppy->pc = pc; @@ -1052,14 +1032,14 @@ static void idefloppy_create_prevent_cmd (idefloppy_pc_t *pc, int prevent) "prevent = %d\n", prevent); idefloppy_init_pc(pc); - pc->c[0] = IDEFLOPPY_PREVENT_REMOVAL_CMD; + pc->c[0] = GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL; pc->c[4] = prevent; } static void idefloppy_create_read_capacity_cmd (idefloppy_pc_t *pc) { idefloppy_init_pc(pc); - pc->c[0] = IDEFLOPPY_READ_CAPACITY_CMD; + pc->c[0] = GPCMD_READ_FORMAT_CAPACITIES; pc->c[7] = 255; pc->c[8] = 255; pc->request_transfer = 255; @@ -1069,7 +1049,7 @@ static void idefloppy_create_format_unit_cmd (idefloppy_pc_t *pc, int b, int l, int flags) { idefloppy_init_pc(pc); - pc->c[0] = IDEFLOPPY_FORMAT_UNIT_CMD; + pc->c[0] = GPCMD_FORMAT_UNIT; pc->c[1] = 0x17; memset(pc->buffer, 0, 12); @@ -1094,7 +1074,7 @@ static void idefloppy_create_mode_sense_cmd (idefloppy_pc_t *pc, u8 page_code, u u16 length = sizeof(idefloppy_mode_parameter_header_t); idefloppy_init_pc(pc); - pc->c[0] = IDEFLOPPY_MODE_SENSE_CMD; + pc->c[0] = GPCMD_MODE_SENSE_10; pc->c[1] = 0; pc->c[2] = page_code + (type << 6); @@ -1116,14 +1096,14 @@ static void idefloppy_create_mode_sense_cmd (idefloppy_pc_t *pc, u8 page_code, u static void idefloppy_create_start_stop_cmd (idefloppy_pc_t *pc, int start) { idefloppy_init_pc(pc); - pc->c[0] = IDEFLOPPY_START_STOP_CMD; + pc->c[0] = GPCMD_START_STOP_UNIT; pc->c[4] = start; } static void idefloppy_create_test_unit_ready_cmd(idefloppy_pc_t *pc) { idefloppy_init_pc(pc); - pc->c[0] = IDEFLOPPY_TEST_UNIT_READY_CMD; + pc->c[0] = GPCMD_TEST_UNIT_READY; } static void idefloppy_create_rw_cmd (idefloppy_floppy_t *floppy, idefloppy_pc_t *pc, struct request *rq, unsigned long sector) @@ -1138,10 +1118,10 @@ static void idefloppy_create_rw_cmd (idefloppy_floppy_t *floppy, idefloppy_pc_t idefloppy_init_pc(pc); if (test_bit(IDEFLOPPY_USE_READ12, &floppy->flags)) { - pc->c[0] = cmd == READ ? IDEFLOPPY_READ12_CMD : IDEFLOPPY_WRITE12_CMD; + pc->c[0] = cmd == READ ? GPCMD_READ_12 : GPCMD_WRITE_12; put_unaligned(htonl(blocks), (unsigned int *) &pc->c[6]); } else { - pc->c[0] = cmd == READ ? IDEFLOPPY_READ10_CMD : IDEFLOPPY_WRITE10_CMD; + pc->c[0] = cmd == READ ? GPCMD_READ_10 : GPCMD_WRITE_10; put_unaligned(htons(blocks), (unsigned short *) &pc->c[7]); } put_unaligned(htonl(block), (unsigned int *) &pc->c[2]); -- cgit v1.2.3 From 8f6224308bb5642506af62b88e1b38582220524d Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Sat, 2 Feb 2008 19:56:33 +0100 Subject: ide-floppy: replace ntoh{s,l} and hton{s,l} calls with the generic byteorder Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-floppy.c | 28 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 14 deletions(-) diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index e4ebb216654..e63758a7896 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -1060,8 +1060,8 @@ static void idefloppy_create_format_unit_cmd (idefloppy_pc_t *pc, int b, int l, pc->buffer[1] ^= 0x20; /* ... turn off DCRT bit */ pc->buffer[3] = 8; - put_unaligned(htonl(b), (unsigned int *)(&pc->buffer[4])); - put_unaligned(htonl(l), (unsigned int *)(&pc->buffer[8])); + put_unaligned(cpu_to_be32(b), (unsigned int *)(&pc->buffer[4])); + put_unaligned(cpu_to_be32(l), (unsigned int *)(&pc->buffer[8])); pc->buffer_size=12; set_bit(PC_WRITING, &pc->flags); } @@ -1089,7 +1089,7 @@ static void idefloppy_create_mode_sense_cmd (idefloppy_pc_t *pc, u8 page_code, u printk(KERN_ERR "ide-floppy: unsupported page code " "in create_mode_sense_cmd\n"); } - put_unaligned(htons(length), (u16 *) &pc->c[7]); + put_unaligned(cpu_to_be16(length), (u16 *) &pc->c[7]); pc->request_transfer = length; } @@ -1119,12 +1119,12 @@ static void idefloppy_create_rw_cmd (idefloppy_floppy_t *floppy, idefloppy_pc_t idefloppy_init_pc(pc); if (test_bit(IDEFLOPPY_USE_READ12, &floppy->flags)) { pc->c[0] = cmd == READ ? GPCMD_READ_12 : GPCMD_WRITE_12; - put_unaligned(htonl(blocks), (unsigned int *) &pc->c[6]); + put_unaligned(cpu_to_be32(blocks), (unsigned int *) &pc->c[6]); } else { pc->c[0] = cmd == READ ? GPCMD_READ_10 : GPCMD_WRITE_10; - put_unaligned(htons(blocks), (unsigned short *) &pc->c[7]); + put_unaligned(cpu_to_be16(blocks), (unsigned short *)&pc->c[7]); } - put_unaligned(htonl(block), (unsigned int *) &pc->c[2]); + put_unaligned(cpu_to_be32(block), (unsigned int *) &pc->c[2]); pc->callback = &idefloppy_rw_callback; pc->rq = rq; pc->b_count = cmd == READ ? 0 : rq->bio->bi_size; @@ -1252,10 +1252,10 @@ static int idefloppy_get_flexible_disk_page (ide_drive_t *drive) set_disk_ro(floppy->disk, floppy->wp); page = (idefloppy_flexible_disk_page_t *) (header + 1); - page->transfer_rate = ntohs(page->transfer_rate); - page->sector_size = ntohs(page->sector_size); - page->cyls = ntohs(page->cyls); - page->rpm = ntohs(page->rpm); + page->transfer_rate = be16_to_cpu(page->transfer_rate); + page->sector_size = be16_to_cpu(page->sector_size); + page->cyls = be16_to_cpu(page->cyls); + page->rpm = be16_to_cpu(page->rpm); capacity = page->cyls * page->heads * page->sectors * page->sector_size; if (memcmp (page, &floppy->flexible_disk_page, sizeof (idefloppy_flexible_disk_page_t))) printk(KERN_INFO "%s: %dkB, %d/%d/%d CHS, %d kBps, " @@ -1328,8 +1328,8 @@ static int idefloppy_get_capacity (ide_drive_t *drive) descriptor = (idefloppy_capacity_descriptor_t *) (header + 1); for (i = 0; i < descriptors; i++, descriptor++) { - blocks = descriptor->blocks = ntohl(descriptor->blocks); - length = descriptor->length = ntohs(descriptor->length); + blocks = descriptor->blocks = be32_to_cpu(descriptor->blocks); + length = descriptor->length = be16_to_cpu(descriptor->length); if (!i) { @@ -1456,8 +1456,8 @@ static int idefloppy_get_format_capacities(ide_drive_t *drive, int __user *arg) if (i == 0) continue; /* Skip the first descriptor */ - blocks = ntohl(descriptor->blocks); - length = ntohs(descriptor->length); + blocks = be32_to_cpu(descriptor->blocks); + length = be16_to_cpu(descriptor->length); if (put_user(blocks, argp)) return(-EFAULT); -- cgit v1.2.3 From 0078df2ece5a752e878410e39eb31e075183b4e7 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Sat, 2 Feb 2008 19:56:33 +0100 Subject: ide-floppy: remove unnecessary ->handler != NULL check This BUG_ON is unneeded since the ->handler != NULL check is performed in ide_set_handler(). Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-floppy.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index e63758a7896..66dfd181110 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -794,7 +794,7 @@ static ide_startstop_t idefloppy_pc_intr (ide_drive_t *drive) "to send us more data than expected " "- discarding data\n"); idefloppy_discard_data(drive, bcount); - BUG_ON(HWGROUP(drive)->handler != NULL); + ide_set_handler(drive, &idefloppy_pc_intr, IDEFLOPPY_WAIT_CMD, @@ -825,7 +825,6 @@ static ide_startstop_t idefloppy_pc_intr (ide_drive_t *drive) pc->actually_transferred += bcount; pc->current_position += bcount; - BUG_ON(HWGROUP(drive)->handler != NULL); ide_set_handler(drive, &idefloppy_pc_intr, IDEFLOPPY_WAIT_CMD, NULL); /* And set the interrupt handler again */ return ide_started; } @@ -852,7 +851,7 @@ static ide_startstop_t idefloppy_transfer_pc (ide_drive_t *drive) "issuing a packet command\n"); return ide_do_reset(drive); } - BUG_ON(HWGROUP(drive)->handler != NULL); + /* Set the interrupt routine */ ide_set_handler(drive, &idefloppy_pc_intr, IDEFLOPPY_WAIT_CMD, NULL); /* Send the actual packet */ @@ -908,7 +907,7 @@ static ide_startstop_t idefloppy_transfer_pc1 (ide_drive_t *drive) * 40 and 50msec work well. idefloppy_pc_intr will not be actually * used until after the packet is moved in about 50 msec. */ - BUG_ON(HWGROUP(drive)->handler != NULL); + ide_set_handler(drive, &idefloppy_pc_intr, /* service routine for packet command */ floppy->ticks, /* wait this long before "failing" */ -- cgit v1.2.3 From 9a24b63db06a4b9389367ebafd9b0cfb5dd1b39f Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Sat, 2 Feb 2008 19:56:33 +0100 Subject: ide-floppy: disambiguate function names There were two almost identical function names in ide-floppy.c, which makes their distinction almost impossible. While ide_floppy_release() cleans up the object after the last reference to it has been dropped, idefloppy_release() is the blkdev .release method from struct block_device_operations which releases that last reference. Rename ide_floppy_release() to idefloppy_cleanup_obj() in order to make its purpose more clear. There should be no functionality change resulting from this patch. Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-floppy.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 66dfd181110..771bfaff93b 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -438,12 +438,12 @@ static struct ide_floppy_obj *ide_floppy_get(struct gendisk *disk) return floppy; } -static void ide_floppy_release(struct kref *); +static void idefloppy_cleanup_obj(struct kref *); static void ide_floppy_put(struct ide_floppy_obj *floppy) { mutex_lock(&idefloppy_ref_mutex); - kref_put(&floppy->kref, ide_floppy_release); + kref_put(&floppy->kref, idefloppy_cleanup_obj); mutex_unlock(&idefloppy_ref_mutex); } @@ -1713,7 +1713,7 @@ static void ide_floppy_remove(ide_drive_t *drive) ide_floppy_put(floppy); } -static void ide_floppy_release(struct kref *kref) +static void idefloppy_cleanup_obj(struct kref *kref) { struct ide_floppy_obj *floppy = to_ide_floppy(kref); ide_drive_t *drive = floppy->drive; -- cgit v1.2.3 From 7e8b163b253499c6c82f921f8cb5b85e9431518c Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Sat, 2 Feb 2008 19:56:34 +0100 Subject: ide-floppy: include the proper headers Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-floppy.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 771bfaff93b..51b36b8dd96 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -42,9 +42,9 @@ #include #include -#include -#include -#include +#include +#include +#include #include /* -- cgit v1.2.3 From bcc77d9cc12f5fd3e54ea01a6ef8f09e4d7b54a8 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Sat, 2 Feb 2008 19:56:34 +0100 Subject: ide-floppy: cleanup and unify debugging macro calls * some debug_log() calls were not using "ide-floppy: " prefix * a few used printk levels different than KERN_INFO (KERN_NOTICE and KERN_ERR, which is the default one if no level is given) Bart: - fix build issues for IDEFLOPPY_DEBUG_LOG set to 1 while at it - s/__FUNCTION__/__func__/ Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-floppy.c | 68 ++++++++++++++++++++++-------------------------- 1 file changed, 31 insertions(+), 37 deletions(-) diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 51b36b8dd96..2860398b193 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -58,7 +58,8 @@ #define IDEFLOPPY_DEBUG( fmt, args... ) #if IDEFLOPPY_DEBUG_LOG -#define debug_log printk +#define debug_log(fmt, args...) \ + printk(KERN_INFO "ide-floppy: " fmt, ## args) #else #define debug_log(fmt, args... ) do {} while(0) #endif @@ -478,7 +479,7 @@ static int idefloppy_do_end_request(ide_drive_t *drive, int uptodate, int nsecs) struct request *rq = HWGROUP(drive)->rq; int error; - debug_log(KERN_INFO "Reached idefloppy_end_request\n"); + debug_log("Reached %s\n", __func__); switch (uptodate) { case 0: error = IDEFLOPPY_ERROR_GENERAL; break; @@ -624,21 +625,20 @@ static void idefloppy_analyze_error (ide_drive_t *drive,idefloppy_request_sense_ floppy->progress_indication = result->sksv[0] & 0x80 ? (u16)get_unaligned((u16 *)(result->sksv+1)):0x10000; if (floppy->failed_pc) - debug_log(KERN_INFO "ide-floppy: pc = %x, sense key = %x, " - "asc = %x, ascq = %x\n", floppy->failed_pc->c[0], - result->sense_key, result->asc, result->ascq); + debug_log("pc = %x, sense key = %x, asc = %x, ascq = %x\n", + floppy->failed_pc->c[0], result->sense_key, + result->asc, result->ascq); else - debug_log(KERN_INFO "ide-floppy: sense key = %x, asc = %x, " - "ascq = %x\n", result->sense_key, - result->asc, result->ascq); + debug_log("sense key = %x, asc = %x, ascq = %x\n", + result->sense_key, result->asc, result->ascq); } static void idefloppy_request_sense_callback (ide_drive_t *drive) { idefloppy_floppy_t *floppy = drive->driver_data; - debug_log(KERN_INFO "ide-floppy: Reached %s\n", __FUNCTION__); - + debug_log("Reached %s\n", __func__); + if (!floppy->pc->error) { idefloppy_analyze_error(drive,(idefloppy_request_sense_result_t *) floppy->pc->buffer); idefloppy_do_end_request(drive, 1, 0); @@ -654,8 +654,8 @@ static void idefloppy_request_sense_callback (ide_drive_t *drive) static void idefloppy_pc_callback (ide_drive_t *drive) { idefloppy_floppy_t *floppy = drive->driver_data; - - debug_log(KERN_INFO "ide-floppy: Reached %s\n", __FUNCTION__); + + debug_log("Reached %s\n", __func__); idefloppy_do_end_request(drive, floppy->pc->error ? 0 : 1, 0); } @@ -714,8 +714,7 @@ static ide_startstop_t idefloppy_pc_intr (ide_drive_t *drive) u16 bcount; u8 stat, ireason; - debug_log(KERN_INFO "ide-floppy: Reached %s interrupt handler\n", - __FUNCTION__); + debug_log("Reached %s interrupt handler\n", __func__); if (test_bit(PC_DMA_IN_PROGRESS, &pc->flags)) { if (HWIF(drive)->ide_dma_end(drive)) { @@ -724,23 +723,22 @@ static ide_startstop_t idefloppy_pc_intr (ide_drive_t *drive) pc->actually_transferred = pc->request_transfer; idefloppy_update_buffers(drive, pc); } - debug_log(KERN_INFO "ide-floppy: DMA finished\n"); + debug_log("DMA finished\n"); } /* Clear the interrupt */ stat = drive->hwif->INB(IDE_STATUS_REG); if ((stat & DRQ_STAT) == 0) { /* No more interrupts */ - debug_log(KERN_INFO "Packet command completed, %d bytes " - "transferred\n", pc->actually_transferred); + debug_log("Packet command completed, %d bytes transferred\n", + pc->actually_transferred); clear_bit(PC_DMA_IN_PROGRESS, &pc->flags); local_irq_enable_in_hardirq(); if ((stat & ERR_STAT) || test_bit(PC_DMA_ERROR, &pc->flags)) { /* Error detected */ - debug_log(KERN_INFO "ide-floppy: %s: I/O error\n", - drive->name); + debug_log("%s: I/O error\n", drive->name); rq->errors++; if (pc->c[0] == GPCMD_REQUEST_SENSE) { printk(KERN_ERR "ide-floppy: I/O error in " @@ -801,9 +799,8 @@ static ide_startstop_t idefloppy_pc_intr (ide_drive_t *drive) NULL); return ide_started; } - debug_log(KERN_NOTICE "ide-floppy: The floppy wants to " - "send us more data than expected - " - "allowing transfer\n"); + debug_log("The floppy wants to send us more data than" + " expected - allowing transfer\n"); } } if (test_bit(PC_WRITING, &pc->flags)) { @@ -970,7 +967,7 @@ static ide_startstop_t idefloppy_issue_pc (ide_drive_t *drive, idefloppy_pc_t *p return ide_stopped; } - debug_log(KERN_INFO "Retry number - %d\n",pc->retries); + debug_log("Retry number - %d\n", pc->retries); pc->retries++; /* We haven't transferred any data yet */ @@ -1019,7 +1016,7 @@ static ide_startstop_t idefloppy_issue_pc (ide_drive_t *drive, idefloppy_pc_t *p static void idefloppy_rw_callback (ide_drive_t *drive) { - debug_log(KERN_INFO "ide-floppy: Reached idefloppy_rw_callback\n"); + debug_log("Reached %s\n", __func__); idefloppy_do_end_request(drive, 1, 0); return; @@ -1027,8 +1024,7 @@ static void idefloppy_rw_callback (ide_drive_t *drive) static void idefloppy_create_prevent_cmd (idefloppy_pc_t *pc, int prevent) { - debug_log(KERN_INFO "ide-floppy: creating prevent removal command, " - "prevent = %d\n", prevent); + debug_log("creating prevent removal command, prevent = %d\n", prevent); idefloppy_init_pc(pc); pc->c[0] = GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL; @@ -1164,10 +1160,10 @@ static ide_startstop_t idefloppy_do_request (ide_drive_t *drive, struct request idefloppy_pc_t *pc; unsigned long block = (unsigned long)block_s; - debug_log(KERN_INFO "dev: %s, flags: %lx, errors: %d\n", + debug_log("dev: %s, cmd_type: %x, errors: %d\n", rq->rq_disk ? rq->rq_disk->disk_name : "?", - rq->flags, rq->errors); - debug_log(KERN_INFO "sector: %ld, nr_sectors: %ld, " + rq->cmd_type, rq->errors); + debug_log("sector: %ld, nr_sectors: %ld, " "current_nr_sectors: %d\n", (long)rq->sector, rq->nr_sectors, rq->current_nr_sectors); @@ -1376,12 +1372,10 @@ static int idefloppy_get_capacity (ide_drive_t *drive) } } if (!i) { - debug_log( "Descriptor 0 Code: %d\n", - descriptor->dc); + debug_log("Descriptor 0 Code: %d\n", descriptor->dc); } - debug_log( "Descriptor %d: %dkB, %d blocks, %d " - "sector size\n", i, blocks * length / 1024, blocks, - length); + debug_log("Descriptor %d: %dkB, %d blocks, %d sector size\n", + i, blocks * length / 1024, blocks, length); } /* Clik! disk does not support get_flexible_disk_page */ @@ -1773,7 +1767,7 @@ static int idefloppy_open(struct inode *inode, struct file *filp) idefloppy_pc_t pc; int ret = 0; - debug_log(KERN_INFO "Reached idefloppy_open\n"); + debug_log("Reached %s\n", __func__); if (!(floppy = ide_floppy_get(disk))) return -ENXIO; @@ -1833,8 +1827,8 @@ static int idefloppy_release(struct inode *inode, struct file *filp) struct ide_floppy_obj *floppy = ide_floppy_g(disk); ide_drive_t *drive = floppy->drive; idefloppy_pc_t pc; - - debug_log(KERN_INFO "Reached idefloppy_release\n"); + + debug_log("Reached %s\n", __func__); if (floppy->openers == 1) { /* IOMEGA Clik! drives do not support lock/unlock commands */ -- cgit v1.2.3 From 948391d17c34b87811e1ddbe1fa96b670510e5e1 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Sat, 2 Feb 2008 19:56:34 +0100 Subject: ide-floppy: remove struct idefloppy_capabilities_page This change is rather temporary and is in preparation of using generic commands as is the case with ide-cd and the uniform cdrom layer (i.e. init_cdrom_command()) However, before this happens, we'll have to remove all typedefs and teach idefloppy_create_mode_sense_cmd() to work directly on u8 buffers. Also, since idefloppy_get_capability_page() was used to read only the sfrp bit, rename the latter so that the name reflects what it does. Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-floppy.c | 55 ++++++------------------------------------------ 1 file changed, 6 insertions(+), 49 deletions(-) diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 2860398b193..13cb08f5eb9 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -119,44 +119,6 @@ typedef struct idefloppy_packet_command_s { #define PC_SUPPRESS_ERROR 6 /* Suppress error reporting */ -/* - * Removable Block Access Capabilities Page - */ -typedef struct { -#if defined(__LITTLE_ENDIAN_BITFIELD) - unsigned page_code :6; /* Page code - Should be 0x1b */ - unsigned reserved1_6 :1; /* Reserved */ - unsigned ps :1; /* Should be 0 */ -#elif defined(__BIG_ENDIAN_BITFIELD) - unsigned ps :1; /* Should be 0 */ - unsigned reserved1_6 :1; /* Reserved */ - unsigned page_code :6; /* Page code - Should be 0x1b */ -#else -#error "Bitfield endianness not defined! Check your byteorder.h" -#endif - u8 page_length; /* Page Length - Should be 0xa */ -#if defined(__LITTLE_ENDIAN_BITFIELD) - unsigned reserved2 :6; - unsigned srfp :1; /* Supports reporting progress of format */ - unsigned sflp :1; /* System floppy type device */ - unsigned tlun :3; /* Total logical units supported by the device */ - unsigned reserved3 :3; - unsigned sml :1; /* Single / Multiple lun supported */ - unsigned ncd :1; /* Non cd optical device */ -#elif defined(__BIG_ENDIAN_BITFIELD) - unsigned sflp :1; /* System floppy type device */ - unsigned srfp :1; /* Supports reporting progress of format */ - unsigned reserved2 :6; - unsigned ncd :1; /* Non cd optical device */ - unsigned sml :1; /* Single / Multiple lun supported */ - unsigned reserved3 :3; - unsigned tlun :3; /* Total logical units supported by the device */ -#else -#error "Bitfield endianness not defined! Check your byteorder.h" -#endif - u8 reserved[8]; -} idefloppy_capabilities_page_t; - /* * Flexible disk page. */ @@ -397,7 +359,8 @@ typedef struct { } idefloppy_request_sense_result_t; /* - * Pages of the SELECT SENSE / MODE SENSE packet commands. + * Pages of the SELECT SENSE / MODE SENSE packet commands. + * See SFF-8070i spec. */ #define IDEFLOPPY_CAPABILITIES_PAGE 0x1b #define IDEFLOPPY_FLEXIBLE_DISK_PAGE 0x05 @@ -1273,25 +1236,20 @@ static int idefloppy_get_flexible_disk_page (ide_drive_t *drive) return 0; } -static int idefloppy_get_capability_page(ide_drive_t *drive) +static int idefloppy_get_sfrp_bit(ide_drive_t *drive) { idefloppy_floppy_t *floppy = drive->driver_data; idefloppy_pc_t pc; - idefloppy_mode_parameter_header_t *header; - idefloppy_capabilities_page_t *page; floppy->srfp = 0; idefloppy_create_mode_sense_cmd(&pc, IDEFLOPPY_CAPABILITIES_PAGE, MODE_SENSE_CURRENT); set_bit(PC_SUPPRESS_ERROR, &pc.flags); - if (idefloppy_queue_pc_tail(drive,&pc)) { + if (idefloppy_queue_pc_tail(drive, &pc)) return 1; - } - header = (idefloppy_mode_parameter_header_t *) pc.buffer; - page= (idefloppy_capabilities_page_t *)(header+1); - floppy->srfp = page->srfp; + floppy->srfp = pc.buffer[8 + 2] & 0x40; return (0); } @@ -1497,8 +1455,7 @@ static int idefloppy_begin_format(ide_drive_t *drive, int __user *arg) return (-EFAULT); } - /* Get the SFRP bit */ - (void) idefloppy_get_capability_page(drive); + (void) idefloppy_get_sfrp_bit(drive); idefloppy_create_format_unit_cmd(&pc, blocks, length, flags); if (idefloppy_queue_pc_tail(drive, &pc)) { return (-EIO); -- cgit v1.2.3 From 4d37d32e4ab5241554ab4a60ff8ee159ba48851c Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Sat, 2 Feb 2008 19:56:34 +0100 Subject: ide-floppy: remove struct idefloppy_inquiry_result Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-floppy.c | 41 ----------------------------------------- 1 file changed, 41 deletions(-) diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 13cb08f5eb9..c346c2174d0 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -284,47 +284,6 @@ struct idefloppy_id_gcw { #endif }; -/* - * INQUIRY packet command - Data Format - */ -typedef struct { -#if defined(__LITTLE_ENDIAN_BITFIELD) - unsigned device_type :5; /* Peripheral Device Type */ - unsigned reserved0_765 :3; /* Peripheral Qualifier - Reserved */ - unsigned reserved1_6t0 :7; /* Reserved */ - unsigned rmb :1; /* Removable Medium Bit */ - unsigned ansi_version :3; /* ANSI Version */ - unsigned ecma_version :3; /* ECMA Version */ - unsigned iso_version :2; /* ISO Version */ - unsigned response_format :4; /* Response Data Format */ - unsigned reserved3_45 :2; /* Reserved */ - unsigned reserved3_6 :1; /* TrmIOP - Reserved */ - unsigned reserved3_7 :1; /* AENC - Reserved */ -#elif defined(__BIG_ENDIAN_BITFIELD) - unsigned reserved0_765 :3; /* Peripheral Qualifier - Reserved */ - unsigned device_type :5; /* Peripheral Device Type */ - unsigned rmb :1; /* Removable Medium Bit */ - unsigned reserved1_6t0 :7; /* Reserved */ - unsigned iso_version :2; /* ISO Version */ - unsigned ecma_version :3; /* ECMA Version */ - unsigned ansi_version :3; /* ANSI Version */ - unsigned reserved3_7 :1; /* AENC - Reserved */ - unsigned reserved3_6 :1; /* TrmIOP - Reserved */ - unsigned reserved3_45 :2; /* Reserved */ - unsigned response_format :4; /* Response Data Format */ -#else -#error "Bitfield endianness not defined! Check your byteorder.h" -#endif - u8 additional_length; /* Additional Length (total_length-4) */ - u8 rsv5, rsv6, rsv7; /* Reserved */ - u8 vendor_id[8]; /* Vendor Identification */ - u8 product_id[16]; /* Product Identification */ - u8 revision_level[4]; /* Revision Level */ - u8 vendor_specific[20]; /* Vendor Specific - Optional */ - u8 reserved56t95[40]; /* Reserved - Optional */ - /* Additional information may be returned */ -} idefloppy_inquiry_result_t; - /* * REQUEST SENSE packet command result - Data Format. */ -- cgit v1.2.3 From a6ff2d3b08fe0780063bb159c7beab9c4ecda3b8 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Sat, 2 Feb 2008 19:56:34 +0100 Subject: ide-floppy: remove struct idefloppy_request_sense_result While at it, collapse idefloppy_analyze_error() into idefloppy_request_sense_callback() since the latter was its only user. Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-floppy.c | 82 ++++++++++++++---------------------------------- 1 file changed, 24 insertions(+), 58 deletions(-) diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index c346c2174d0..98df4023ecd 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -284,39 +284,6 @@ struct idefloppy_id_gcw { #endif }; -/* - * REQUEST SENSE packet command result - Data Format. - */ -typedef struct { -#if defined(__LITTLE_ENDIAN_BITFIELD) - unsigned error_code :7; /* Current error (0x70) */ - unsigned valid :1; /* The information field conforms to SFF-8070i */ - u8 reserved1 :8; /* Reserved */ - unsigned sense_key :4; /* Sense Key */ - unsigned reserved2_4 :1; /* Reserved */ - unsigned ili :1; /* Incorrect Length Indicator */ - unsigned reserved2_67 :2; -#elif defined(__BIG_ENDIAN_BITFIELD) - unsigned valid :1; /* The information field conforms to SFF-8070i */ - unsigned error_code :7; /* Current error (0x70) */ - u8 reserved1 :8; /* Reserved */ - unsigned reserved2_67 :2; - unsigned ili :1; /* Incorrect Length Indicator */ - unsigned reserved2_4 :1; /* Reserved */ - unsigned sense_key :4; /* Sense Key */ -#else -#error "Bitfield endianness not defined! Check your byteorder.h" -#endif - u32 information __attribute__ ((packed)); - u8 asl; /* Additional sense length (n-7) */ - u32 command_specific; /* Additional command specific information */ - u8 asc; /* Additional Sense Code */ - u8 ascq; /* Additional Sense Code Qualifier */ - u8 replaceable_unit_code; /* Field Replaceable Unit Code */ - u8 sksv[3]; - u8 pad[2]; /* Padding to 20 bytes */ -} idefloppy_request_sense_result_t; - /* * Pages of the SELECT SENSE / MODE SENSE packet commands. * See SFF-8070i spec. @@ -533,39 +500,38 @@ static struct request *idefloppy_next_rq_storage (ide_drive_t *drive) return (&floppy->rq_stack[floppy->rq_stack_index++]); } -/* - * idefloppy_analyze_error is called on each failed packet command retry - * to analyze the request sense. - */ -static void idefloppy_analyze_error (ide_drive_t *drive,idefloppy_request_sense_result_t *result) -{ - idefloppy_floppy_t *floppy = drive->driver_data; - - floppy->sense_key = result->sense_key; - floppy->asc = result->asc; - floppy->ascq = result->ascq; - floppy->progress_indication = result->sksv[0] & 0x80 ? - (u16)get_unaligned((u16 *)(result->sksv+1)):0x10000; - if (floppy->failed_pc) - debug_log("pc = %x, sense key = %x, asc = %x, ascq = %x\n", - floppy->failed_pc->c[0], result->sense_key, - result->asc, result->ascq); - else - debug_log("sense key = %x, asc = %x, ascq = %x\n", - result->sense_key, result->asc, result->ascq); -} - -static void idefloppy_request_sense_callback (ide_drive_t *drive) +static void idefloppy_request_sense_callback(ide_drive_t *drive) { idefloppy_floppy_t *floppy = drive->driver_data; + u8 *buf = floppy->pc->buffer; debug_log("Reached %s\n", __func__); if (!floppy->pc->error) { - idefloppy_analyze_error(drive,(idefloppy_request_sense_result_t *) floppy->pc->buffer); + floppy->sense_key = buf[2] & 0x0F; + floppy->asc = buf[12]; + floppy->ascq = buf[13]; + floppy->progress_indication = buf[15] & 0x80 ? + (u16)get_unaligned((u16 *)&buf[16]) : 0x10000; + + if (floppy->failed_pc) + debug_log("pc = %x, sense key = %x, asc = %x," + " ascq = %x\n", + floppy->failed_pc->c[0], + floppy->sense_key, + floppy->asc, + floppy->ascq); + else + debug_log("sense key = %x, asc = %x, ascq = %x\n", + floppy->sense_key, + floppy->asc, + floppy->ascq); + + idefloppy_do_end_request(drive, 1, 0); } else { - printk(KERN_ERR "Error in REQUEST SENSE itself - Aborting request!\n"); + printk(KERN_ERR "Error in REQUEST SENSE itself - Aborting" + " request!\n"); idefloppy_do_end_request(drive, 0, 0); } } -- cgit v1.2.3 From 24a5d7033bd38cbbc73766d3b567bc337b84d1a0 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Sat, 2 Feb 2008 19:56:34 +0100 Subject: ide-floppy: remove struct idefloppy_mode_parameter_header Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-floppy.c | 26 +++----------------------- 1 file changed, 3 insertions(+), 23 deletions(-) diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 98df4023ecd..e9d11faec9b 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -291,24 +291,6 @@ struct idefloppy_id_gcw { #define IDEFLOPPY_CAPABILITIES_PAGE 0x1b #define IDEFLOPPY_FLEXIBLE_DISK_PAGE 0x05 -/* - * Mode Parameter Header for the MODE SENSE packet command - */ -typedef struct { - u16 mode_data_length; /* Length of the following data transfer */ - u8 medium_type; /* Medium Type */ -#if defined(__LITTLE_ENDIAN_BITFIELD) - unsigned reserved3 :7; - unsigned wp :1; /* Write protect */ -#elif defined(__BIG_ENDIAN_BITFIELD) - unsigned wp :1; /* Write protect */ - unsigned reserved3 :7; -#else -#error "Bitfield endianness not defined! Check your byteorder.h" -#endif - u8 reserved[4]; -} idefloppy_mode_parameter_header_t; - static DEFINE_MUTEX(idefloppy_ref_mutex); #define to_ide_floppy(obj) container_of(obj, struct ide_floppy_obj, kref) @@ -954,7 +936,7 @@ static void idefloppy_create_format_unit_cmd (idefloppy_pc_t *pc, int b, int l, */ static void idefloppy_create_mode_sense_cmd (idefloppy_pc_t *pc, u8 page_code, u8 type) { - u16 length = sizeof(idefloppy_mode_parameter_header_t); + u16 length = 8; /* sizeof(Mode Parameter Header) = 8 Bytes */ idefloppy_init_pc(pc); pc->c[0] = GPCMD_MODE_SENSE_10; @@ -1120,7 +1102,6 @@ static int idefloppy_get_flexible_disk_page (ide_drive_t *drive) { idefloppy_floppy_t *floppy = drive->driver_data; idefloppy_pc_t pc; - idefloppy_mode_parameter_header_t *header; idefloppy_flexible_disk_page_t *page; int capacity, lba_capacity; @@ -1130,10 +1111,9 @@ static int idefloppy_get_flexible_disk_page (ide_drive_t *drive) "page parameters\n"); return 1; } - header = (idefloppy_mode_parameter_header_t *) pc.buffer; - floppy->wp = header->wp; + floppy->wp = !!(pc.buffer[3] & 0x80); set_disk_ro(floppy->disk, floppy->wp); - page = (idefloppy_flexible_disk_page_t *) (header + 1); + page = (idefloppy_flexible_disk_page_t *) &pc.buffer[8]; page->transfer_rate = be16_to_cpu(page->transfer_rate); page->sector_size = be16_to_cpu(page->sector_size); -- cgit v1.2.3 From 8e81bbba72453b74e4ceb1480546b1092184c11c Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Sat, 2 Feb 2008 19:56:35 +0100 Subject: ide-floppy: remove struct idefloppy_flexible_disk_page Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-floppy.c | 90 +++++++++++++++++++----------------------------- 1 file changed, 36 insertions(+), 54 deletions(-) diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index e9d11faec9b..5d84fa5f3dc 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -119,33 +119,6 @@ typedef struct idefloppy_packet_command_s { #define PC_SUPPRESS_ERROR 6 /* Suppress error reporting */ -/* - * Flexible disk page. - */ -typedef struct { -#if defined(__LITTLE_ENDIAN_BITFIELD) - unsigned page_code :6; /* Page code - Should be 0x5 */ - unsigned reserved1_6 :1; /* Reserved */ - unsigned ps :1; /* The device is capable of saving the page */ -#elif defined(__BIG_ENDIAN_BITFIELD) - unsigned ps :1; /* The device is capable of saving the page */ - unsigned reserved1_6 :1; /* Reserved */ - unsigned page_code :6; /* Page code - Should be 0x5 */ -#else -#error "Bitfield endianness not defined! Check your byteorder.h" -#endif - u8 page_length; /* Page Length - Should be 0x1e */ - u16 transfer_rate; /* In kilobits per second */ - u8 heads, sectors; /* Number of heads, Number of sectors per track */ - u16 sector_size; /* Byes per sector */ - u16 cyls; /* Number of cylinders */ - u8 reserved10[10]; - u8 motor_delay; /* Motor off delay */ - u8 reserved21[7]; - u16 rpm; /* Rotations per minute */ - u8 reserved30[2]; -} idefloppy_flexible_disk_page_t; - /* * Format capacity */ @@ -214,7 +187,7 @@ typedef struct ide_floppy_obj { /* Last format capacity */ idefloppy_capacity_descriptor_t capacity; /* Copy of the flexible disk page */ - idefloppy_flexible_disk_page_t flexible_disk_page; + u8 flexible_disk_page[32]; /* Write protect */ int wp; /* Supports format progress report */ @@ -1095,48 +1068,57 @@ static int idefloppy_queue_pc_tail (ide_drive_t *drive,idefloppy_pc_t *pc) } /* - * Look at the flexible disk page parameters. We will ignore the CHS - * capacity parameters and use the LBA parameters instead. + * Look at the flexible disk page parameters. We ignore the CHS capacity + * parameters and use the LBA parameters instead. */ -static int idefloppy_get_flexible_disk_page (ide_drive_t *drive) +static int ide_floppy_get_flexible_disk_page(ide_drive_t *drive) { idefloppy_floppy_t *floppy = drive->driver_data; idefloppy_pc_t pc; - idefloppy_flexible_disk_page_t *page; + u8 *page; int capacity, lba_capacity; + u16 transfer_rate, sector_size, cyls, rpm; + u8 heads, sectors; - idefloppy_create_mode_sense_cmd(&pc, IDEFLOPPY_FLEXIBLE_DISK_PAGE, MODE_SENSE_CURRENT); - if (idefloppy_queue_pc_tail(drive,&pc)) { - printk(KERN_ERR "ide-floppy: Can't get flexible disk " - "page parameters\n"); + idefloppy_create_mode_sense_cmd(&pc, IDEFLOPPY_FLEXIBLE_DISK_PAGE, + MODE_SENSE_CURRENT); + + if (idefloppy_queue_pc_tail(drive, &pc)) { + printk(KERN_ERR "ide-floppy: Can't get flexible disk page" + " parameters\n"); return 1; } floppy->wp = !!(pc.buffer[3] & 0x80); set_disk_ro(floppy->disk, floppy->wp); - page = (idefloppy_flexible_disk_page_t *) &pc.buffer[8]; - - page->transfer_rate = be16_to_cpu(page->transfer_rate); - page->sector_size = be16_to_cpu(page->sector_size); - page->cyls = be16_to_cpu(page->cyls); - page->rpm = be16_to_cpu(page->rpm); - capacity = page->cyls * page->heads * page->sectors * page->sector_size; - if (memcmp (page, &floppy->flexible_disk_page, sizeof (idefloppy_flexible_disk_page_t))) + page = &pc.buffer[8]; + + transfer_rate = be16_to_cpu(*(u16 *)&pc.buffer[8 + 2]); + sector_size = be16_to_cpu(*(u16 *)&pc.buffer[8 + 6]); + cyls = be16_to_cpu(*(u16 *)&pc.buffer[8 + 8]); + rpm = be16_to_cpu(*(u16 *)&pc.buffer[8 + 28]); + heads = pc.buffer[8 + 4]; + sectors = pc.buffer[8 + 5]; + + capacity = cyls * heads * sectors * sector_size; + + if (memcmp(page, &floppy->flexible_disk_page, 32)) printk(KERN_INFO "%s: %dkB, %d/%d/%d CHS, %d kBps, " "%d sector size, %d rpm\n", - drive->name, capacity / 1024, page->cyls, - page->heads, page->sectors, - page->transfer_rate / 8, page->sector_size, page->rpm); - - floppy->flexible_disk_page = *page; - drive->bios_cyl = page->cyls; - drive->bios_head = page->heads; - drive->bios_sect = page->sectors; + drive->name, capacity / 1024, cyls, heads, + sectors, transfer_rate / 8, sector_size, rpm); + + memcpy(&floppy->flexible_disk_page, page, 32); + drive->bios_cyl = cyls; + drive->bios_head = heads; + drive->bios_sect = sectors; lba_capacity = floppy->blocks * floppy->block_size; + if (capacity < lba_capacity) { printk(KERN_NOTICE "%s: The disk reports a capacity of %d " "bytes, but the drive only handles %d\n", drive->name, lba_capacity, capacity); - floppy->blocks = floppy->block_size ? capacity / floppy->block_size : 0; + floppy->blocks = floppy->block_size ? + capacity / floppy->block_size : 0; } return 0; } @@ -1243,7 +1225,7 @@ static int idefloppy_get_capacity (ide_drive_t *drive) /* Clik! disk does not support get_flexible_disk_page */ if (!test_bit(IDEFLOPPY_CLIK_DRIVE, &floppy->flags)) { - (void) idefloppy_get_flexible_disk_page(drive); + (void) ide_floppy_get_flexible_disk_page(drive); } set_capacity(floppy->disk, floppy->blocks * floppy->bs_factor); -- cgit v1.2.3 From 194ec0c07895d8f8bf3ca8e50d5225f7968ad2d0 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Sat, 2 Feb 2008 19:56:35 +0100 Subject: ide-floppy: remove struct idefloppy_capacity_descriptor Also, - remove the accompanying 4 byte idefloppy_capacity_header. - rename functions from idefloppy_... to ide_floppy_... after cleanup. - simplify loop in ide_floppy_get_capacity() by reversing if-test condition logically. - finally, fix white space and checkpatch.pl issues Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-floppy.c | 176 ++++++++++++++++++++--------------------------- 1 file changed, 76 insertions(+), 100 deletions(-) diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 5d84fa5f3dc..28a0bae94e8 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -119,29 +119,7 @@ typedef struct idefloppy_packet_command_s { #define PC_SUPPRESS_ERROR 6 /* Suppress error reporting */ -/* - * Format capacity - */ -typedef struct { - u8 reserved[3]; - u8 length; /* Length of the following descriptors in bytes */ -} idefloppy_capacity_header_t; - -typedef struct { - u32 blocks; /* Number of blocks */ -#if defined(__LITTLE_ENDIAN_BITFIELD) - unsigned dc :2; /* Descriptor Code */ - unsigned reserved :6; -#elif defined(__BIG_ENDIAN_BITFIELD) - unsigned reserved :6; - unsigned dc :2; /* Descriptor Code */ -#else -#error "Bitfield endianness not defined! Check your byteorder.h" -#endif - u8 length_msb; /* Block Length (MSB)*/ - u16 length; /* Block Length */ -} idefloppy_capacity_descriptor_t; - +/* format capacities descriptor codes */ #define CAPACITY_INVALID 0x00 #define CAPACITY_UNFORMATTED 0x01 #define CAPACITY_CURRENT 0x02 @@ -184,8 +162,8 @@ typedef struct ide_floppy_obj { */ /* Current format */ int blocks, block_size, bs_factor; - /* Last format capacity */ - idefloppy_capacity_descriptor_t capacity; + /* Last format capacity descriptor */ + u8 cap_desc[8]; /* Copy of the flexible disk page */ u8 flexible_disk_page[32]; /* Write protect */ @@ -1141,17 +1119,17 @@ static int idefloppy_get_sfrp_bit(ide_drive_t *drive) } /* - * Determine if a media is present in the floppy drive, and if so, - * its LBA capacity. + * Determine if a media is present in the floppy drive, and if so, its LBA + * capacity. */ -static int idefloppy_get_capacity (ide_drive_t *drive) +static int ide_floppy_get_capacity(ide_drive_t *drive) { idefloppy_floppy_t *floppy = drive->driver_data; idefloppy_pc_t pc; - idefloppy_capacity_header_t *header; - idefloppy_capacity_descriptor_t *descriptor; - int i, descriptors, rc = 1, blocks, length; - + u8 *cap_desc; + u8 header_len, desc_cnt; + int i, rc = 1, blocks, length; + drive->bios_cyl = 0; drive->bios_head = drive->bios_sect = 0; floppy->blocks = 0; @@ -1163,17 +1141,26 @@ static int idefloppy_get_capacity (ide_drive_t *drive) printk(KERN_ERR "ide-floppy: Can't get floppy parameters\n"); return 1; } - header = (idefloppy_capacity_header_t *) pc.buffer; - descriptors = header->length / sizeof(idefloppy_capacity_descriptor_t); - descriptor = (idefloppy_capacity_descriptor_t *) (header + 1); + header_len = pc.buffer[3]; + cap_desc = &pc.buffer[4]; + desc_cnt = header_len / 8; /* capacity descriptor of 8 bytes */ + + for (i = 0; i < desc_cnt; i++) { + unsigned int desc_start = 4 + i*8; + + blocks = be32_to_cpu(*(u32 *)&pc.buffer[desc_start]); + length = be16_to_cpu(*(u16 *)&pc.buffer[desc_start + 6]); + + debug_log("Descriptor %d: %dkB, %d blocks, %d sector size\n", + i, blocks * length / 1024, blocks, length); - for (i = 0; i < descriptors; i++, descriptor++) { - blocks = descriptor->blocks = be32_to_cpu(descriptor->blocks); - length = descriptor->length = be16_to_cpu(descriptor->length); + if (i) + continue; + /* + * the code below is valid only for the 1st descriptor, ie i=0 + */ - if (!i) - { - switch (descriptor->dc) { + switch (pc.buffer[desc_start + 4] & 0x03) { /* Clik! drive returns this instead of CAPACITY_CURRENT */ case CAPACITY_UNFORMATTED: if (!test_bit(IDEFLOPPY_CLIK_DRIVE, &floppy->flags)) @@ -1184,23 +1171,25 @@ static int idefloppy_get_capacity (ide_drive_t *drive) break; case CAPACITY_CURRENT: /* Normal Zip/LS-120 disks */ - if (memcmp(descriptor, &floppy->capacity, sizeof (idefloppy_capacity_descriptor_t))) + if (memcmp(cap_desc, &floppy->cap_desc, 8)) printk(KERN_INFO "%s: %dkB, %d blocks, %d " "sector size\n", drive->name, blocks * length / 1024, blocks, length); - floppy->capacity = *descriptor; + memcpy(&floppy->cap_desc, cap_desc, 8); + if (!length || length % 512) { printk(KERN_NOTICE "%s: %d bytes block size " "not supported\n", drive->name, length); } else { - floppy->blocks = blocks; - floppy->block_size = length; - if ((floppy->bs_factor = length / 512) != 1) - printk(KERN_NOTICE "%s: warning: non " + floppy->blocks = blocks; + floppy->block_size = length; + floppy->bs_factor = length / 512; + if (floppy->bs_factor != 1) + printk(KERN_NOTICE "%s: warning: non " "512 bytes block size not " "fully supported\n", drive->name); - rc = 0; + rc = 0; } break; case CAPACITY_NO_CARTRIDGE: @@ -1215,52 +1204,42 @@ static int idefloppy_get_capacity (ide_drive_t *drive) "in drive\n", drive->name); break; } - } - if (!i) { - debug_log("Descriptor 0 Code: %d\n", descriptor->dc); - } - debug_log("Descriptor %d: %dkB, %d blocks, %d sector size\n", - i, blocks * length / 1024, blocks, length); + debug_log("Descriptor 0 Code: %d\n", + pc.buffer[desc_start + 4] & 0x03); } /* Clik! disk does not support get_flexible_disk_page */ - if (!test_bit(IDEFLOPPY_CLIK_DRIVE, &floppy->flags)) { + if (!test_bit(IDEFLOPPY_CLIK_DRIVE, &floppy->flags)) (void) ide_floppy_get_flexible_disk_page(drive); - } set_capacity(floppy->disk, floppy->blocks * floppy->bs_factor); return rc; } /* -** Obtain the list of formattable capacities. -** Very similar to idefloppy_get_capacity, except that we push the capacity -** descriptors to userland, instead of our own structures. -** -** Userland gives us the following structure: -** -** struct idefloppy_format_capacities { -** int nformats; -** struct { -** int nblocks; -** int blocksize; -** } formats[]; -** } ; -** -** userland initializes nformats to the number of allocated formats[] -** records. On exit we set nformats to the number of records we've -** actually initialized. -** -*/ + * Obtain the list of formattable capacities. + * Very similar to ide_floppy_get_capacity, except that we push the capacity + * descriptors to userland, instead of our own structures. + * + * Userland gives us the following structure: + * + * struct idefloppy_format_capacities { + * int nformats; + * struct { + * int nblocks; + * int blocksize; + * } formats[]; + * }; + * + * userland initializes nformats to the number of allocated formats[] records. + * On exit we set nformats to the number of records we've actually initialized. + */ -static int idefloppy_get_format_capacities(ide_drive_t *drive, int __user *arg) +static int ide_floppy_get_format_capacities(ide_drive_t *drive, int __user *arg) { - idefloppy_pc_t pc; - idefloppy_capacity_header_t *header; - idefloppy_capacity_descriptor_t *descriptor; - int i, descriptors, blocks, length; - int u_array_size; - int u_index; + idefloppy_pc_t pc; + u8 header_len, desc_cnt; + int i, blocks, length, u_array_size, u_index; int __user *argp; if (get_user(u_array_size, arg)) @@ -1272,30 +1251,27 @@ static int idefloppy_get_format_capacities(ide_drive_t *drive, int __user *arg) idefloppy_create_read_capacity_cmd(&pc); if (idefloppy_queue_pc_tail(drive, &pc)) { printk(KERN_ERR "ide-floppy: Can't get floppy parameters\n"); - return (-EIO); - } - header = (idefloppy_capacity_header_t *) pc.buffer; - descriptors = header->length / - sizeof(idefloppy_capacity_descriptor_t); - descriptor = (idefloppy_capacity_descriptor_t *) (header + 1); + return (-EIO); + } + header_len = pc.buffer[3]; + desc_cnt = header_len / 8; /* capacity descriptor of 8 bytes */ u_index = 0; argp = arg + 1; /* - ** We always skip the first capacity descriptor. That's the - ** current capacity. We are interested in the remaining descriptors, - ** the formattable capacities. - */ + * We always skip the first capacity descriptor. That's the current + * capacity. We are interested in the remaining descriptors, the + * formattable capacities. + */ + for (i = 1; i < desc_cnt; i++) { + unsigned int desc_start = 4 + i*8; - for (i=0; i= u_array_size) break; /* User-supplied buffer too small */ - if (i == 0) - continue; /* Skip the first descriptor */ - blocks = be32_to_cpu(descriptor->blocks); - length = be16_to_cpu(descriptor->length); + blocks = be32_to_cpu(*(u32 *)&pc.buffer[desc_start]); + length = be16_to_cpu(*(u16 *)&pc.buffer[desc_start + 6]); if (put_user(blocks, argp)) return(-EFAULT); @@ -1535,7 +1511,7 @@ static void idefloppy_setup (ide_drive_t *drive, idefloppy_floppy_t *floppy) } - (void) idefloppy_get_capacity(drive); + (void) ide_floppy_get_capacity(drive); idefloppy_add_settings(drive); } @@ -1630,7 +1606,7 @@ static int idefloppy_open(struct inode *inode, struct file *filp) (void) idefloppy_queue_pc_tail(drive, &pc); } - if (idefloppy_get_capacity (drive) + if (ide_floppy_get_capacity(drive) && (filp->f_flags & O_NDELAY) == 0 /* ** Allow O_NDELAY to open a drive without a disk, or with @@ -1734,7 +1710,7 @@ static int idefloppy_ioctl(struct inode *inode, struct file *file, case IDEFLOPPY_IOCTL_FORMAT_SUPPORTED: return 0; case IDEFLOPPY_IOCTL_FORMAT_GET_CAPACITY: - return idefloppy_get_format_capacities(drive, argp); + return ide_floppy_get_format_capacities(drive, argp); case IDEFLOPPY_IOCTL_FORMAT_START: if (!(file->f_mode & 2)) -- cgit v1.2.3 From 20bf7bdad443d473826832674230834654b31d0b Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Sat, 2 Feb 2008 19:56:35 +0100 Subject: ide-floppy: factor out ioctl handlers from idefloppy_ioctl() By passing idefloppy_floppy_t *floppy to the factored out functions, we get rid of (almost) all local vars so stack usage should be at minimum here. Also, we merge idefloppy_begin_format() into idefloppy_format_start() since it is its only user. Also, rename idefloppy_format_start() to idefloppy_format_unit(). Finally, rename the reworked functions to ide_floppy..(). Bart - minor CodingStyle fixup Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-floppy.c | 153 ++++++++++++++++++++++++----------------------- 1 file changed, 78 insertions(+), 75 deletions(-) diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 28a0bae94e8..af4b633fa3d 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -1289,44 +1289,6 @@ static int ide_floppy_get_format_capacities(ide_drive_t *drive, int __user *arg) return (0); } -/* -** Send ATAPI_FORMAT_UNIT to the drive. -** -** Userland gives us the following structure: -** -** struct idefloppy_format_command { -** int nblocks; -** int blocksize; -** int flags; -** } ; -** -** flags is a bitmask, currently, the only defined flag is: -** -** 0x01 - verify media after format. -*/ - -static int idefloppy_begin_format(ide_drive_t *drive, int __user *arg) -{ - int blocks; - int length; - int flags; - idefloppy_pc_t pc; - - if (get_user(blocks, arg) || - get_user(length, arg+1) || - get_user(flags, arg+2)) { - return (-EFAULT); - } - - (void) idefloppy_get_sfrp_bit(drive); - idefloppy_create_format_unit_cmd(&pc, blocks, length, flags); - if (idefloppy_queue_pc_tail(drive, &pc)) { - return (-EIO); - } - - return (0); -} - /* ** Get ATAPI_FORMAT_UNIT progress indication. ** @@ -1678,64 +1640,105 @@ static int idefloppy_getgeo(struct block_device *bdev, struct hd_geometry *geo) return 0; } +static int ide_floppy_lockdoor(idefloppy_floppy_t *floppy, idefloppy_pc_t *pc, + unsigned long arg, unsigned int cmd) +{ + if (floppy->openers > 1) + return -EBUSY; + + /* The IOMEGA Clik! Drive doesn't support this command - + * no room for an eject mechanism */ + if (!test_bit(IDEFLOPPY_CLIK_DRIVE, &floppy->flags)) { + int prevent = arg ? 1 : 0; + + if (cmd == CDROMEJECT) + prevent = 0; + + idefloppy_create_prevent_cmd(pc, prevent); + (void) idefloppy_queue_pc_tail(floppy->drive, pc); + } + + if (cmd == CDROMEJECT) { + idefloppy_create_start_stop_cmd(pc, 2); + (void) idefloppy_queue_pc_tail(floppy->drive, pc); + } + + return 0; +} + +static int ide_floppy_format_unit(idefloppy_floppy_t *floppy, + int __user *arg) +{ + int blocks, length, flags, err = 0; + idefloppy_pc_t pc; + + if (floppy->openers > 1) { + /* Don't format if someone is using the disk */ + clear_bit(IDEFLOPPY_FORMAT_IN_PROGRESS, &floppy->flags); + return -EBUSY; + } + + set_bit(IDEFLOPPY_FORMAT_IN_PROGRESS, &floppy->flags); + + /* + * Send ATAPI_FORMAT_UNIT to the drive. + * + * Userland gives us the following structure: + * + * struct idefloppy_format_command { + * int nblocks; + * int blocksize; + * int flags; + * } ; + * + * flags is a bitmask, currently, the only defined flag is: + * + * 0x01 - verify media after format. + */ + if (get_user(blocks, arg) || + get_user(length, arg+1) || + get_user(flags, arg+2)) { + err = -EFAULT; + goto out; + } + + (void) idefloppy_get_sfrp_bit(floppy->drive); + idefloppy_create_format_unit_cmd(&pc, blocks, length, flags); + + if (idefloppy_queue_pc_tail(floppy->drive, &pc)) + err = -EIO; + +out: + if (err) + clear_bit(IDEFLOPPY_FORMAT_IN_PROGRESS, &floppy->flags); + return err; +} + + static int idefloppy_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) { struct block_device *bdev = inode->i_bdev; struct ide_floppy_obj *floppy = ide_floppy_g(bdev->bd_disk); ide_drive_t *drive = floppy->drive; + idefloppy_pc_t pc; void __user *argp = (void __user *)arg; int err; - int prevent = (arg) ? 1 : 0; - idefloppy_pc_t pc; switch (cmd) { case CDROMEJECT: - prevent = 0; /* fall through */ case CDROM_LOCKDOOR: - if (floppy->openers > 1) - return -EBUSY; - - /* The IOMEGA Clik! Drive doesn't support this command - no room for an eject mechanism */ - if (!test_bit(IDEFLOPPY_CLIK_DRIVE, &floppy->flags)) { - idefloppy_create_prevent_cmd(&pc, prevent); - (void) idefloppy_queue_pc_tail(drive, &pc); - } - if (cmd == CDROMEJECT) { - idefloppy_create_start_stop_cmd(&pc, 2); - (void) idefloppy_queue_pc_tail(drive, &pc); - } - return 0; + return ide_floppy_lockdoor(floppy, &pc, arg, cmd); case IDEFLOPPY_IOCTL_FORMAT_SUPPORTED: return 0; case IDEFLOPPY_IOCTL_FORMAT_GET_CAPACITY: return ide_floppy_get_format_capacities(drive, argp); case IDEFLOPPY_IOCTL_FORMAT_START: - if (!(file->f_mode & 2)) return -EPERM; - if (floppy->openers > 1) { - /* Don't format if someone is using the disk */ - - clear_bit(IDEFLOPPY_FORMAT_IN_PROGRESS, - &floppy->flags); - return -EBUSY; - } - - set_bit(IDEFLOPPY_FORMAT_IN_PROGRESS, &floppy->flags); - - err = idefloppy_begin_format(drive, argp); - if (err) - clear_bit(IDEFLOPPY_FORMAT_IN_PROGRESS, &floppy->flags); - return err; - /* - ** Note, the bit will be cleared when the device is - ** closed. This is the cleanest way to handle the - ** situation where the drive does not support - ** format progress reporting. - */ + return ide_floppy_format_unit(floppy, (int __user *)arg); case IDEFLOPPY_IOCTL_FORMAT_GET_PROGRESS: return idefloppy_get_format_progress(drive, argp); } -- cgit v1.2.3 From d30a7fba4380901b6a33fd798a0d0f9794a70ccc Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Sat, 2 Feb 2008 19:56:35 +0100 Subject: ide-floppy: report DMA handling in idefloppy_pc_intr() properly Bart: - use 'hwif' instead of 'HWIF(drive)' - minor CodingStyle fixup Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-floppy.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index af4b633fa3d..5c32d0cda4a 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -532,13 +532,17 @@ static ide_startstop_t idefloppy_pc_intr (ide_drive_t *drive) idefloppy_pc_t *pc = floppy->pc; struct request *rq = pc->rq; unsigned int temp; + int dma_error = 0; u16 bcount; u8 stat, ireason; debug_log("Reached %s interrupt handler\n", __func__); if (test_bit(PC_DMA_IN_PROGRESS, &pc->flags)) { - if (HWIF(drive)->ide_dma_end(drive)) { + dma_error = hwif->ide_dma_end(drive); + if (dma_error) { + printk(KERN_ERR "%s: DMA %s error\n", drive->name, + rq_data_dir(rq) ? "write" : "read"); set_bit(PC_DMA_ERROR, &pc->flags); } else { pc->actually_transferred = pc->request_transfer; -- cgit v1.2.3 From d652c1380870228dfe05a2f00ce4edec3f5bd42d Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Sat, 2 Feb 2008 19:56:35 +0100 Subject: ide-floppy: mv idefloppy_{should_,}report_error In addition to shortening the function name, move the printk-call into the function thereby saving some code lines. Also, make the function out_of_line since it is not on a performance critical path. Finally, rename the reworked function to ide_floppy..(). Bart: - minor CodingStyle fixup Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-floppy.c | 38 ++++++++++++++------------------------ 1 file changed, 14 insertions(+), 24 deletions(-) diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 5c32d0cda4a..416719c1718 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -737,18 +737,20 @@ static ide_startstop_t idefloppy_transfer_pc1 (ide_drive_t *drive) return ide_started; } -/** - * idefloppy_should_report_error() - * - * Supresses error messages resulting from Medium not present - */ -static inline int idefloppy_should_report_error(idefloppy_floppy_t *floppy) +static void ide_floppy_report_error(idefloppy_floppy_t *floppy, + idefloppy_pc_t *pc) { + /* supress error messages resulting from Medium not present */ if (floppy->sense_key == 0x02 && floppy->asc == 0x3a && floppy->ascq == 0x00) - return 0; - return 1; + return; + + printk(KERN_ERR "ide-floppy: %s: I/O error, pc = %2x, key = %2x, " + "asc = %2x, ascq = %2x\n", + floppy->drive->name, pc->c[0], floppy->sense_key, + floppy->asc, floppy->ascq); + } /* @@ -775,15 +777,8 @@ static ide_startstop_t idefloppy_issue_pc (ide_drive_t *drive, idefloppy_pc_t *p * a legitimate error code was received. */ if (!test_bit(PC_ABORT, &pc->flags)) { - if (!test_bit(PC_SUPPRESS_ERROR, &pc->flags)) { - if (idefloppy_should_report_error(floppy)) - printk(KERN_ERR "ide-floppy: %s: I/O error, " - "pc = %2x, key = %2x, " - "asc = %2x, ascq = %2x\n", - drive->name, pc->c[0], - floppy->sense_key, - floppy->asc, floppy->ascq); - } + if (!test_bit(PC_SUPPRESS_ERROR, &pc->flags)) + ide_floppy_report_error(floppy, pc); /* Giving up */ pc->error = IDEFLOPPY_ERROR_GENERAL; } @@ -993,13 +988,8 @@ static ide_startstop_t idefloppy_do_request (ide_drive_t *drive, struct request rq->nr_sectors, rq->current_nr_sectors); if (rq->errors >= ERROR_MAX) { - if (floppy->failed_pc != NULL) { - if (idefloppy_should_report_error(floppy)) - printk(KERN_ERR "ide-floppy: %s: I/O error, pc = %2x," - " key = %2x, asc = %2x, ascq = %2x\n", - drive->name, floppy->failed_pc->c[0], - floppy->sense_key, floppy->asc, floppy->ascq); - } + if (floppy->failed_pc) + ide_floppy_report_error(floppy, floppy->failed_pc); else printk(KERN_ERR "ide-floppy: %s: I/O error\n", drive->name); -- cgit v1.2.3 From 0bf399e69c365a71c230014af90966faea92e0a3 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Sat, 2 Feb 2008 19:56:36 +0100 Subject: ide-floppy: remove IDEFLOPPY_DEBUG_BUGS macro Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-floppy.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 416719c1718..5ea1b1b86c4 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -52,7 +52,6 @@ */ #define IDEFLOPPY_DEBUG_LOG 0 #define IDEFLOPPY_DEBUG_INFO 0 -#define IDEFLOPPY_DEBUG_BUGS 1 /* #define IDEFLOPPY_DEBUG(fmt, args...) printk(KERN_INFO fmt, ## args) */ #define IDEFLOPPY_DEBUG( fmt, args... ) @@ -280,13 +279,11 @@ static void idefloppy_discard_data (ide_drive_t *drive, unsigned int bcount) (void) HWIF(drive)->INB(IDE_DATA_REG); } -#if IDEFLOPPY_DEBUG_BUGS -static void idefloppy_write_zeros (ide_drive_t *drive, unsigned int bcount) +static void idefloppy_write_zeros(ide_drive_t *drive, unsigned int bcount) { while (bcount--) HWIF(drive)->OUTB(0, IDE_DATA_REG); } -#endif /* IDEFLOPPY_DEBUG_BUGS */ /* @@ -382,12 +379,10 @@ static void idefloppy_output_buffers (ide_drive_t *drive, idefloppy_pc_t *pc, un idefloppy_do_end_request(drive, 1, done >> 9); -#if IDEFLOPPY_DEBUG_BUGS if (bcount) { printk(KERN_ERR "%s: leftover data in idefloppy_output_buffers, bcount == %d\n", drive->name, bcount); idefloppy_write_zeros(drive, bcount); } -#endif } static void idefloppy_update_buffers (ide_drive_t *drive, idefloppy_pc_t *pc) -- cgit v1.2.3 From 0eea6458c04a1cbb2e8e5c2cdbef736d882d200c Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Sat, 2 Feb 2008 19:56:36 +0100 Subject: ide-floppy: use an xfer_func_t and io_buf_t typedefs in order to unify rw Also, move xfer_func_t typedef to the ide.h since it is used by two drivers now (more coming). Bart: - use __func__ while at it Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-cd.c | 2 -- drivers/ide/ide-floppy.c | 33 ++++++++++++++++----------------- include/linux/ide.h | 3 +++ 3 files changed, 19 insertions(+), 19 deletions(-) diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 23074e84472..ee4d458e2bb 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -604,8 +604,6 @@ static ide_startstop_t cdrom_transfer_packet_command (ide_drive_t *drive, * Block read functions. */ -typedef void (xfer_func_t)(ide_drive_t *, void *, u32); - static void ide_cd_pad_transfer(ide_drive_t *drive, xfer_func_t *xf, int len) { while (len > 0) { diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 5ea1b1b86c4..78afc493e1f 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -516,16 +516,17 @@ static void idefloppy_retry_pc (ide_drive_t *drive) idefloppy_queue_pc_head(drive, pc, rq); } -/* - * idefloppy_pc_intr is the usual interrupt handler which will be called - * during a packet command. - */ +typedef void (io_buf_t)(ide_drive_t *, idefloppy_pc_t *, unsigned int); + +/* The usual interrupt handler called during a packet command. */ static ide_startstop_t idefloppy_pc_intr (ide_drive_t *drive) { idefloppy_floppy_t *floppy = drive->driver_data; ide_hwif_t *hwif = drive->hwif; idefloppy_pc_t *pc = floppy->pc; struct request *rq = pc->rq; + xfer_func_t *xferfunc; + io_buf_t *iobuf_func; unsigned int temp; int dma_error = 0; u16 bcount; @@ -592,7 +593,7 @@ static ide_startstop_t idefloppy_pc_intr (ide_drive_t *drive) ireason = hwif->INB(IDE_IREASON_REG); if (ireason & CD) { - printk(KERN_ERR "ide-floppy: CoD != 0 in idefloppy_pc_intr\n"); + printk(KERN_ERR "ide-floppy: CoD != 0 in %s\n", __func__); return ide_do_reset(drive); } if (((ireason & IO) == IO) == test_bit(PC_WRITING, &pc->flags)) { @@ -624,20 +625,18 @@ static ide_startstop_t idefloppy_pc_intr (ide_drive_t *drive) } } if (test_bit(PC_WRITING, &pc->flags)) { - if (pc->buffer != NULL) - /* Write the current buffer */ - hwif->atapi_output_bytes(drive, pc->current_position, - bcount); - else - idefloppy_output_buffers(drive, pc, bcount); + xferfunc = hwif->atapi_output_bytes; + iobuf_func = &idefloppy_output_buffers; } else { - if (pc->buffer != NULL) - /* Read the current buffer */ - hwif->atapi_input_bytes(drive, pc->current_position, - bcount); - else - idefloppy_input_buffers(drive, pc, bcount); + xferfunc = hwif->atapi_input_bytes; + iobuf_func = &idefloppy_input_buffers; } + + if (pc->buffer) + xferfunc(drive, pc->current_position, bcount); + else + iobuf_func(drive, pc, bcount); + /* Update the current position */ pc->actually_transferred += bcount; pc->current_position += bcount; diff --git a/include/linux/ide.h b/include/linux/ide.h index 29e35980d7e..f7fe8b1fe68 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -627,6 +627,9 @@ typedef struct hwif_s { typedef ide_startstop_t (ide_handler_t)(ide_drive_t *); typedef int (ide_expiry_t)(ide_drive_t *); +/* used by ide-cd, ide-floppy, etc. */ +typedef void (xfer_func_t)(ide_drive_t *, void *, u32); + typedef struct hwgroup_s { /* irq handler, if active */ ide_startstop_t (*handler)(ide_drive_t *); -- cgit v1.2.3 From 32925e1a16d7bdb4b56b4194b7c48f687538d330 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Sat, 2 Feb 2008 19:56:36 +0100 Subject: ide-floppy: merge idefloppy_{input,output}_buffers We merge idefloppy_{input,output}_buffers() into idefloppy_io_buffers() by introducing a 4th arg. called direction. According to its value we atapi_input_bytes() or atapi_output_bytes(). Also, this simplifies the interrupt handler logic a bit. Finally, rename idefloppy_io_buffers() to ide_floppy_io_buffers(). Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-floppy.c | 65 ++++++++++++++---------------------------------- 1 file changed, 19 insertions(+), 46 deletions(-) diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 78afc493e1f..0b22933e258 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -321,39 +321,8 @@ static int idefloppy_do_end_request(ide_drive_t *drive, int uptodate, int nsecs) return 0; } -static void idefloppy_input_buffers (ide_drive_t *drive, idefloppy_pc_t *pc, unsigned int bcount) -{ - struct request *rq = pc->rq; - struct bio_vec *bvec; - struct req_iterator iter; - unsigned long flags; - char *data; - int count, done = 0; - - rq_for_each_segment(bvec, rq, iter) { - if (!bcount) - break; - - count = min(bvec->bv_len, bcount); - - data = bvec_kmap_irq(bvec, &flags); - drive->hwif->atapi_input_bytes(drive, data, count); - bvec_kunmap_irq(data, &flags); - - bcount -= count; - pc->b_count += count; - done += count; - } - - idefloppy_do_end_request(drive, 1, done >> 9); - - if (bcount) { - printk(KERN_ERR "%s: leftover data in idefloppy_input_buffers, bcount == %d\n", drive->name, bcount); - idefloppy_discard_data(drive, bcount); - } -} - -static void idefloppy_output_buffers (ide_drive_t *drive, idefloppy_pc_t *pc, unsigned int bcount) +static void ide_floppy_io_buffers(ide_drive_t *drive, idefloppy_pc_t *pc, + unsigned int bcount, int direction) { struct request *rq = pc->rq; struct req_iterator iter; @@ -369,7 +338,10 @@ static void idefloppy_output_buffers (ide_drive_t *drive, idefloppy_pc_t *pc, un count = min(bvec->bv_len, bcount); data = bvec_kmap_irq(bvec, &flags); - drive->hwif->atapi_output_bytes(drive, data, count); + if (direction) + drive->hwif->atapi_output_bytes(drive, data, count); + else + drive->hwif->atapi_input_bytes(drive, data, count); bvec_kunmap_irq(data, &flags); bcount -= count; @@ -380,8 +352,13 @@ static void idefloppy_output_buffers (ide_drive_t *drive, idefloppy_pc_t *pc, un idefloppy_do_end_request(drive, 1, done >> 9); if (bcount) { - printk(KERN_ERR "%s: leftover data in idefloppy_output_buffers, bcount == %d\n", drive->name, bcount); - idefloppy_write_zeros(drive, bcount); + printk(KERN_ERR "%s: leftover data in %s, bcount == %d\n", + drive->name, __func__, bcount); + if (direction) + idefloppy_write_zeros(drive, bcount); + else + idefloppy_discard_data(drive, bcount); + } } @@ -516,8 +493,6 @@ static void idefloppy_retry_pc (ide_drive_t *drive) idefloppy_queue_pc_head(drive, pc, rq); } -typedef void (io_buf_t)(ide_drive_t *, idefloppy_pc_t *, unsigned int); - /* The usual interrupt handler called during a packet command. */ static ide_startstop_t idefloppy_pc_intr (ide_drive_t *drive) { @@ -526,7 +501,6 @@ static ide_startstop_t idefloppy_pc_intr (ide_drive_t *drive) idefloppy_pc_t *pc = floppy->pc; struct request *rq = pc->rq; xfer_func_t *xferfunc; - io_buf_t *iobuf_func; unsigned int temp; int dma_error = 0; u16 bcount; @@ -624,24 +598,23 @@ static ide_startstop_t idefloppy_pc_intr (ide_drive_t *drive) " expected - allowing transfer\n"); } } - if (test_bit(PC_WRITING, &pc->flags)) { + if (test_bit(PC_WRITING, &pc->flags)) xferfunc = hwif->atapi_output_bytes; - iobuf_func = &idefloppy_output_buffers; - } else { + else xferfunc = hwif->atapi_input_bytes; - iobuf_func = &idefloppy_input_buffers; - } if (pc->buffer) xferfunc(drive, pc->current_position, bcount); else - iobuf_func(drive, pc, bcount); + ide_floppy_io_buffers(drive, pc, bcount, + test_bit(PC_WRITING, &pc->flags)); /* Update the current position */ pc->actually_transferred += bcount; pc->current_position += bcount; - ide_set_handler(drive, &idefloppy_pc_intr, IDEFLOPPY_WAIT_CMD, NULL); /* And set the interrupt handler again */ + /* And set the interrupt handler again */ + ide_set_handler(drive, &idefloppy_pc_intr, IDEFLOPPY_WAIT_CMD, NULL); return ide_started; } -- cgit v1.2.3 From ae7e8ddc34d8cd302886a1f8d1db8a3400532d1f Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Sat, 2 Feb 2008 19:56:36 +0100 Subject: ide-floppy: remove unused IDEFLOPPY_USE_READ12 This flag is not being set anywhere in the driver so it can go. Bart: - minor CodingStyle fixup Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-floppy.c | 18 +++++++----------- 1 file changed, 7 insertions(+), 11 deletions(-) diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 0b22933e258..1a28b2e7bbb 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -180,7 +180,6 @@ typedef struct ide_floppy_obj { */ #define IDEFLOPPY_DRQ_INTERRUPT 0 /* DRQ interrupt device */ #define IDEFLOPPY_MEDIA_CHANGED 1 /* Media may have changed */ -#define IDEFLOPPY_USE_READ12 2 /* Use READ12/WRITE12 or READ10/WRITE10 */ #define IDEFLOPPY_FORMAT_IN_PROGRESS 3 /* Format in progress */ #define IDEFLOPPY_CLIK_DRIVE 4 /* Avoid commands not supported in Clik drive */ #define IDEFLOPPY_ZIP_DRIVE 5 /* Requires BH algorithm for packets */ @@ -888,25 +887,22 @@ static void idefloppy_create_test_unit_ready_cmd(idefloppy_pc_t *pc) pc->c[0] = GPCMD_TEST_UNIT_READY; } -static void idefloppy_create_rw_cmd (idefloppy_floppy_t *floppy, idefloppy_pc_t *pc, struct request *rq, unsigned long sector) +static void idefloppy_create_rw_cmd(idefloppy_floppy_t *floppy, + idefloppy_pc_t *pc, struct request *rq, + unsigned long sector) { int block = sector / floppy->bs_factor; int blocks = rq->nr_sectors / floppy->bs_factor; int cmd = rq_data_dir(rq); - debug_log("create_rw1%d_cmd: block == %d, blocks == %d\n", - 2 * test_bit (IDEFLOPPY_USE_READ12, &floppy->flags), + debug_log("create_rw10_cmd: block == %d, blocks == %d\n", block, blocks); idefloppy_init_pc(pc); - if (test_bit(IDEFLOPPY_USE_READ12, &floppy->flags)) { - pc->c[0] = cmd == READ ? GPCMD_READ_12 : GPCMD_WRITE_12; - put_unaligned(cpu_to_be32(blocks), (unsigned int *) &pc->c[6]); - } else { - pc->c[0] = cmd == READ ? GPCMD_READ_10 : GPCMD_WRITE_10; - put_unaligned(cpu_to_be16(blocks), (unsigned short *)&pc->c[7]); - } + pc->c[0] = cmd == READ ? GPCMD_READ_10 : GPCMD_WRITE_10; + put_unaligned(cpu_to_be16(blocks), (unsigned short *)&pc->c[7]); put_unaligned(cpu_to_be32(block), (unsigned int *) &pc->c[2]); + pc->callback = &idefloppy_rw_callback; pc->rq = rq; pc->b_count = cmd == READ ? 0 : rq->bio->bi_size; -- cgit v1.2.3 From f373bd820dd80ae079537afb9db511b8802bb9f7 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Sat, 2 Feb 2008 19:56:36 +0100 Subject: ide-floppy: remove IDEFLOPPY_DEBUG_INFO This info is already available through ioctl() and /proc Bart: - dump 'gcw.packet_size' for unsupported packet sizes Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-floppy.c | 63 ++++++++++-------------------------------------- 1 file changed, 13 insertions(+), 50 deletions(-) diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 1a28b2e7bbb..b56e37d0159 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -47,11 +47,8 @@ #include #include -/* - * The following are used to debug the driver. - */ +/* define to see debug info */ #define IDEFLOPPY_DEBUG_LOG 0 -#define IDEFLOPPY_DEBUG_INFO 0 /* #define IDEFLOPPY_DEBUG(fmt, args...) printk(KERN_INFO fmt, ## args) */ #define IDEFLOPPY_DEBUG( fmt, args... ) @@ -1303,15 +1300,12 @@ static sector_t idefloppy_capacity (ide_drive_t *drive) } /* - * idefloppy_identify_device checks if we can support a drive, - * based on the ATAPI IDENTIFY command results. + * Check whether we can support a drive, based on the ATAPI IDENTIFY command + * results. */ -static int idefloppy_identify_device (ide_drive_t *drive,struct hd_driveid *id) +static int idefloppy_identify_device(ide_drive_t *drive, struct hd_driveid *id) { struct idefloppy_id_gcw gcw; -#if IDEFLOPPY_DEBUG_INFO - char buffer[80]; -#endif /* IDEFLOPPY_DEBUG_INFO */ *((u16 *) &gcw) = id->config; @@ -1320,54 +1314,23 @@ static int idefloppy_identify_device (ide_drive_t *drive,struct hd_driveid *id) if ((gcw.device_type == 5) && !strstr(id->model, "CD-ROM") && strstr(id->model, "ZIP")) - gcw.device_type = 0; + gcw.device_type = 0; #endif -#if IDEFLOPPY_DEBUG_INFO - printk(KERN_INFO "Dumping ATAPI Identify Device floppy parameters\n"); - switch (gcw.protocol) { - case 0: case 1: sprintf(buffer, "ATA");break; - case 2: sprintf(buffer, "ATAPI");break; - case 3: sprintf(buffer, "Reserved (Unknown to ide-floppy)");break; - } - printk(KERN_INFO "Protocol Type: %s\n", buffer); - switch (gcw.device_type) { - case 0: sprintf(buffer, "Direct-access Device");break; - case 1: sprintf(buffer, "Streaming Tape Device");break; - case 2: case 3: case 4: sprintf (buffer, "Reserved");break; - case 5: sprintf(buffer, "CD-ROM Device");break; - case 6: sprintf(buffer, "Reserved"); - case 7: sprintf(buffer, "Optical memory Device");break; - case 0x1f: sprintf(buffer, "Unknown or no Device type");break; - default: sprintf(buffer, "Reserved"); - } - printk(KERN_INFO "Device Type: %x - %s\n", gcw.device_type, buffer); - printk(KERN_INFO "Removable: %s\n",gcw.removable ? "Yes":"No"); - switch (gcw.drq_type) { - case 0: sprintf(buffer, "Microprocessor DRQ");break; - case 1: sprintf(buffer, "Interrupt DRQ");break; - case 2: sprintf(buffer, "Accelerated DRQ");break; - case 3: sprintf(buffer, "Reserved");break; - } - printk(KERN_INFO "Command Packet DRQ Type: %s\n", buffer); - switch (gcw.packet_size) { - case 0: sprintf(buffer, "12 bytes");break; - case 1: sprintf(buffer, "16 bytes");break; - default: sprintf(buffer, "Reserved");break; - } - printk(KERN_INFO "Command Packet Size: %s\n", buffer); -#endif /* IDEFLOPPY_DEBUG_INFO */ - if (gcw.protocol != 2) - printk(KERN_ERR "ide-floppy: Protocol is not ATAPI\n"); + printk(KERN_ERR "ide-floppy: Protocol (0x%02x) is not ATAPI\n", + gcw.protocol); else if (gcw.device_type != 0) - printk(KERN_ERR "ide-floppy: Device type is not set to floppy\n"); + printk(KERN_ERR "ide-floppy: Device type (0x%02x) is not set " + "to floppy\n", gcw.device_type); else if (!gcw.removable) printk(KERN_ERR "ide-floppy: The removable flag is not set\n"); else if (gcw.drq_type == 3) { - printk(KERN_ERR "ide-floppy: Sorry, DRQ type %d not supported\n", gcw.drq_type); + printk(KERN_ERR "ide-floppy: Sorry, DRQ type (0x%02x) not " + "supported\n", gcw.drq_type); } else if (gcw.packet_size != 0) { - printk(KERN_ERR "ide-floppy: Packet size is not 12 bytes long\n"); + printk(KERN_ERR "ide-floppy: Packet size (0x%02x) is not 12 " + "bytes long\n", gcw.packet_size); } else return 1; return 0; -- cgit v1.2.3 From 757ced8983a0b8d1bb353128605cec0f7a6f633e Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Sat, 2 Feb 2008 19:56:37 +0100 Subject: ide-floppy: remove unused flag PC_ABORT This flag was never being set in the code so remove it. By the way, the code in the second patch was being executed unconditionally, i.e. in case pc->retries > IDEFLOPPY_MAX_PC_RETRIES is true (actually that is the only case when the outer if-test passed), !test_bit(PC_ABORT, &pc->flags) was always true so the comment is now incorrect and has to go. Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-floppy.c | 19 ++++++------------- 1 file changed, 6 insertions(+), 13 deletions(-) diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index b56e37d0159..01701ca9520 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -107,7 +107,6 @@ typedef struct idefloppy_packet_command_s { /* * Packet command flag bits. */ -#define PC_ABORT 0 /* Set when an error is considered normal - We won't retry */ #define PC_DMA_RECOMMENDED 2 /* 1 when we prefer to use DMA if possible */ #define PC_DMA_IN_PROGRESS 3 /* 1 while DMA in progress */ #define PC_DMA_ERROR 4 /* 1 when encountered problem during DMA */ @@ -733,18 +732,12 @@ static ide_startstop_t idefloppy_issue_pc (ide_drive_t *drive, idefloppy_pc_t *p /* Set the current packet command */ floppy->pc = pc; - if (pc->retries > IDEFLOPPY_MAX_PC_RETRIES || - test_bit(PC_ABORT, &pc->flags)) { - /* - * We will "abort" retrying a packet command in case - * a legitimate error code was received. - */ - if (!test_bit(PC_ABORT, &pc->flags)) { - if (!test_bit(PC_SUPPRESS_ERROR, &pc->flags)) - ide_floppy_report_error(floppy, pc); - /* Giving up */ - pc->error = IDEFLOPPY_ERROR_GENERAL; - } + if (pc->retries > IDEFLOPPY_MAX_PC_RETRIES) { + if (!test_bit(PC_SUPPRESS_ERROR, &pc->flags)) + ide_floppy_report_error(floppy, pc); + /* Giving up */ + pc->error = IDEFLOPPY_ERROR_GENERAL; + floppy->failed_pc = NULL; pc->callback(drive); return ide_stopped; -- cgit v1.2.3 From 6e5fa7b88c376b9d33228888f2ccd71fc79b2a17 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Sat, 2 Feb 2008 19:56:37 +0100 Subject: ide-floppy: remove atomic test_*bit macros ..and replace them with flag enums. Bart: - fix idefloppy_media_changed() return value Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-floppy.c | 125 ++++++++++++++++++++++++++--------------------- 1 file changed, 69 insertions(+), 56 deletions(-) diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 01701ca9520..ac66622a357 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -104,15 +104,19 @@ typedef struct idefloppy_packet_command_s { unsigned long flags; /* Status/Action bit flags: long for set_bit */ } idefloppy_pc_t; -/* - * Packet command flag bits. - */ -#define PC_DMA_RECOMMENDED 2 /* 1 when we prefer to use DMA if possible */ -#define PC_DMA_IN_PROGRESS 3 /* 1 while DMA in progress */ -#define PC_DMA_ERROR 4 /* 1 when encountered problem during DMA */ -#define PC_WRITING 5 /* Data direction */ - -#define PC_SUPPRESS_ERROR 6 /* Suppress error reporting */ +/* Packet command flag bits. */ +enum { + /* 1 when we prefer to use DMA if possible */ + PC_FLAG_DMA_RECOMMENDED = (1 << 0), + /* 1 while DMA in progress */ + PC_FLAG_DMA_IN_PROGRESS = (1 << 1), + /* 1 when encountered problem during DMA */ + PC_FLAG_DMA_ERROR = (1 << 2), + /* Data direction */ + PC_FLAG_WRITING = (1 << 3), + /* Suppress error reporting */ + PC_FLAG_SUPPRESS_ERROR = (1 << 4), +}; /* format capacities descriptor codes */ #define CAPACITY_INVALID 0x00 @@ -171,14 +175,19 @@ typedef struct ide_floppy_obj { #define IDEFLOPPY_TICKS_DELAY HZ/20 /* default delay for ZIP 100 (50ms) */ -/* - * Floppy flag bits values. - */ -#define IDEFLOPPY_DRQ_INTERRUPT 0 /* DRQ interrupt device */ -#define IDEFLOPPY_MEDIA_CHANGED 1 /* Media may have changed */ -#define IDEFLOPPY_FORMAT_IN_PROGRESS 3 /* Format in progress */ -#define IDEFLOPPY_CLIK_DRIVE 4 /* Avoid commands not supported in Clik drive */ -#define IDEFLOPPY_ZIP_DRIVE 5 /* Requires BH algorithm for packets */ +/* Floppy flag bits values. */ +enum { + /* DRQ interrupt device */ + IDEFLOPPY_FLAG_DRQ_INTERRUPT = (1 << 0), + /* Media may have changed */ + IDEFLOPPY_FLAG_MEDIA_CHANGED = (1 << 1), + /* Format in progress */ + IDEFLOPPY_FLAG_FORMAT_IN_PROGRESS = (1 << 2), + /* Avoid commands not supported in Clik drive */ + IDEFLOPPY_FLAG_CLIK_DRIVE = (1 << 3), + /* Requires BH algorithm for packets */ + IDEFLOPPY_FLAG_ZIP_DRIVE = (1 << 4), +}; /* * Defines for the mode sense command @@ -503,12 +512,12 @@ static ide_startstop_t idefloppy_pc_intr (ide_drive_t *drive) debug_log("Reached %s interrupt handler\n", __func__); - if (test_bit(PC_DMA_IN_PROGRESS, &pc->flags)) { + if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) { dma_error = hwif->ide_dma_end(drive); if (dma_error) { printk(KERN_ERR "%s: DMA %s error\n", drive->name, rq_data_dir(rq) ? "write" : "read"); - set_bit(PC_DMA_ERROR, &pc->flags); + pc->flags |= PC_FLAG_DMA_ERROR; } else { pc->actually_transferred = pc->request_transfer; idefloppy_update_buffers(drive, pc); @@ -522,11 +531,11 @@ static ide_startstop_t idefloppy_pc_intr (ide_drive_t *drive) if ((stat & DRQ_STAT) == 0) { /* No more interrupts */ debug_log("Packet command completed, %d bytes transferred\n", pc->actually_transferred); - clear_bit(PC_DMA_IN_PROGRESS, &pc->flags); + pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS; local_irq_enable_in_hardirq(); - if ((stat & ERR_STAT) || test_bit(PC_DMA_ERROR, &pc->flags)) { + if ((stat & ERR_STAT) || (pc->flags & PC_FLAG_DMA_ERROR)) { /* Error detected */ debug_log("%s: I/O error\n", drive->name); rq->errors++; @@ -548,7 +557,8 @@ static ide_startstop_t idefloppy_pc_intr (ide_drive_t *drive) return ide_stopped; } - if (test_and_clear_bit(PC_DMA_IN_PROGRESS, &pc->flags)) { + if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) { + pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS; printk(KERN_ERR "ide-floppy: The floppy wants to issue " "more interrupts in DMA mode\n"); ide_dma_off(drive); @@ -565,7 +575,7 @@ static ide_startstop_t idefloppy_pc_intr (ide_drive_t *drive) printk(KERN_ERR "ide-floppy: CoD != 0 in %s\n", __func__); return ide_do_reset(drive); } - if (((ireason & IO) == IO) == test_bit(PC_WRITING, &pc->flags)) { + if (((ireason & IO) == IO) == !!(pc->flags & PC_FLAG_WRITING)) { /* Hopefully, we will never get here */ printk(KERN_ERR "ide-floppy: We wanted to %s, ", (ireason & IO) ? "Write" : "Read"); @@ -573,7 +583,7 @@ static ide_startstop_t idefloppy_pc_intr (ide_drive_t *drive) (ireason & IO) ? "Read" : "Write"); return ide_do_reset(drive); } - if (!test_bit(PC_WRITING, &pc->flags)) { + if (!(pc->flags & PC_FLAG_WRITING)) { /* Reading - Check that we have enough space */ temp = pc->actually_transferred + bcount; if (temp > pc->request_transfer) { @@ -593,7 +603,7 @@ static ide_startstop_t idefloppy_pc_intr (ide_drive_t *drive) " expected - allowing transfer\n"); } } - if (test_bit(PC_WRITING, &pc->flags)) + if (pc->flags & PC_FLAG_WRITING) xferfunc = hwif->atapi_output_bytes; else xferfunc = hwif->atapi_input_bytes; @@ -602,7 +612,7 @@ static ide_startstop_t idefloppy_pc_intr (ide_drive_t *drive) xferfunc(drive, pc->current_position, bcount); else ide_floppy_io_buffers(drive, pc, bcount, - test_bit(PC_WRITING, &pc->flags)); + !!(pc->flags & PC_FLAG_WRITING)); /* Update the current position */ pc->actually_transferred += bcount; @@ -733,7 +743,7 @@ static ide_startstop_t idefloppy_issue_pc (ide_drive_t *drive, idefloppy_pc_t *p floppy->pc = pc; if (pc->retries > IDEFLOPPY_MAX_PC_RETRIES) { - if (!test_bit(PC_SUPPRESS_ERROR, &pc->flags)) + if (!(pc->flags & PC_FLAG_SUPPRESS_ERROR)) ide_floppy_report_error(floppy, pc); /* Giving up */ pc->error = IDEFLOPPY_ERROR_GENERAL; @@ -751,24 +761,25 @@ static ide_startstop_t idefloppy_issue_pc (ide_drive_t *drive, idefloppy_pc_t *p pc->current_position = pc->buffer; bcount = min(pc->request_transfer, 63 * 1024); - if (test_and_clear_bit(PC_DMA_ERROR, &pc->flags)) + if (pc->flags & PC_FLAG_DMA_ERROR) { + pc->flags &= ~PC_FLAG_DMA_ERROR; ide_dma_off(drive); - + } dma = 0; - if (test_bit(PC_DMA_RECOMMENDED, &pc->flags) && drive->using_dma) + if ((pc->flags & PC_FLAG_DMA_RECOMMENDED) && drive->using_dma) dma = !hwif->dma_setup(drive); ide_pktcmd_tf_load(drive, IDE_TFLAG_NO_SELECT_MASK | IDE_TFLAG_OUT_DEVICE, bcount, dma); if (dma) { /* Begin DMA, if necessary */ - set_bit(PC_DMA_IN_PROGRESS, &pc->flags); + pc->flags |= PC_FLAG_DMA_IN_PROGRESS; hwif->dma_start(drive); } /* Can we transfer the packet when we get the interrupt or wait? */ - if (test_bit(IDEFLOPPY_ZIP_DRIVE, &floppy->flags)) { + if (floppy->flags & IDEFLOPPY_FLAG_ZIP_DRIVE) { /* wait */ pkt_xfer_routine = &idefloppy_transfer_pc1; } else { @@ -776,7 +787,7 @@ static ide_startstop_t idefloppy_issue_pc (ide_drive_t *drive, idefloppy_pc_t *p pkt_xfer_routine = &idefloppy_transfer_pc; } - if (test_bit (IDEFLOPPY_DRQ_INTERRUPT, &floppy->flags)) { + if (floppy->flags & IDEFLOPPY_FLAG_DRQ_INTERRUPT) { /* Issue the packet command */ ide_execute_command(drive, WIN_PACKETCMD, pkt_xfer_routine, @@ -834,7 +845,7 @@ static void idefloppy_create_format_unit_cmd (idefloppy_pc_t *pc, int b, int l, put_unaligned(cpu_to_be32(b), (unsigned int *)(&pc->buffer[4])); put_unaligned(cpu_to_be32(l), (unsigned int *)(&pc->buffer[8])); pc->buffer_size=12; - set_bit(PC_WRITING, &pc->flags); + pc->flags |= PC_FLAG_WRITING; } /* @@ -897,10 +908,10 @@ static void idefloppy_create_rw_cmd(idefloppy_floppy_t *floppy, pc->rq = rq; pc->b_count = cmd == READ ? 0 : rq->bio->bi_size; if (rq->cmd_flags & REQ_RW) - set_bit(PC_WRITING, &pc->flags); + pc->flags |= PC_FLAG_WRITING; pc->buffer = NULL; pc->request_transfer = pc->buffer_size = blocks * floppy->block_size; - set_bit(PC_DMA_RECOMMENDED, &pc->flags); + pc->flags |= PC_FLAG_DMA_RECOMMENDED; } static void @@ -912,11 +923,10 @@ idefloppy_blockpc_cmd(idefloppy_floppy_t *floppy, idefloppy_pc_t *pc, struct req pc->rq = rq; pc->b_count = rq->data_len; if (rq->data_len && rq_data_dir(rq) == WRITE) - set_bit(PC_WRITING, &pc->flags); + pc->flags |= PC_FLAG_WRITING; pc->buffer = rq->data; if (rq->bio) - set_bit(PC_DMA_RECOMMENDED, &pc->flags); - + pc->flags |= PC_FLAG_DMA_RECOMMENDED; /* * possibly problematic, doesn't look like ide-floppy correctly * handled scattered requests if dma fails... @@ -1057,7 +1067,7 @@ static int idefloppy_get_sfrp_bit(ide_drive_t *drive) idefloppy_create_mode_sense_cmd(&pc, IDEFLOPPY_CAPABILITIES_PAGE, MODE_SENSE_CURRENT); - set_bit(PC_SUPPRESS_ERROR, &pc.flags); + pc.flags |= PC_FLAG_SUPPRESS_ERROR; if (idefloppy_queue_pc_tail(drive, &pc)) return 1; @@ -1110,7 +1120,7 @@ static int ide_floppy_get_capacity(ide_drive_t *drive) switch (pc.buffer[desc_start + 4] & 0x03) { /* Clik! drive returns this instead of CAPACITY_CURRENT */ case CAPACITY_UNFORMATTED: - if (!test_bit(IDEFLOPPY_CLIK_DRIVE, &floppy->flags)) + if (!(floppy->flags & IDEFLOPPY_FLAG_CLIK_DRIVE)) /* * If it is not a clik drive, break out * (maintains previous driver behaviour) @@ -1156,7 +1166,7 @@ static int ide_floppy_get_capacity(ide_drive_t *drive) } /* Clik! disk does not support get_flexible_disk_page */ - if (!test_bit(IDEFLOPPY_CLIK_DRIVE, &floppy->flags)) + if (!(floppy->flags & IDEFLOPPY_FLAG_CLIK_DRIVE)) (void) ide_floppy_get_flexible_disk_page(drive); set_capacity(floppy->disk, floppy->blocks * floppy->bs_factor); @@ -1356,7 +1366,7 @@ static void idefloppy_setup (ide_drive_t *drive, idefloppy_floppy_t *floppy) *((u16 *) &gcw) = drive->id->config; floppy->pc = floppy->pc_stack; if (gcw.drq_type == 1) - set_bit(IDEFLOPPY_DRQ_INTERRUPT, &floppy->flags); + floppy->flags |= IDEFLOPPY_FLAG_DRQ_INTERRUPT; /* * We used to check revisions here. At this point however * I'm giving up. Just assume they are all broken, its easier. @@ -1369,7 +1379,7 @@ static void idefloppy_setup (ide_drive_t *drive, idefloppy_floppy_t *floppy) */ if (!strncmp(drive->id->model, "IOMEGA ZIP 100 ATAPI", 20)) { - set_bit(IDEFLOPPY_ZIP_DRIVE, &floppy->flags); + floppy->flags |= IDEFLOPPY_FLAG_ZIP_DRIVE; /* This value will be visible in the /proc/ide/hdx/settings */ floppy->ticks = IDEFLOPPY_TICKS_DELAY; blk_queue_max_sectors(drive->queue, 64); @@ -1382,7 +1392,7 @@ static void idefloppy_setup (ide_drive_t *drive, idefloppy_floppy_t *floppy) */ if (strncmp(drive->id->model, "IOMEGA Clik!", 11) == 0) { blk_queue_max_sectors(drive->queue, 64); - set_bit(IDEFLOPPY_CLIK_DRIVE, &floppy->flags); + floppy->flags |= IDEFLOPPY_FLAG_CLIK_DRIVE; } @@ -1472,7 +1482,7 @@ static int idefloppy_open(struct inode *inode, struct file *filp) floppy->openers++; if (floppy->openers == 1) { - clear_bit(IDEFLOPPY_FORMAT_IN_PROGRESS, &floppy->flags); + floppy->flags &= ~IDEFLOPPY_FLAG_FORMAT_IN_PROGRESS; /* Just in case */ idefloppy_create_test_unit_ready_cmd(&pc); @@ -1497,14 +1507,14 @@ static int idefloppy_open(struct inode *inode, struct file *filp) ret = -EROFS; goto out_put_floppy; } - set_bit(IDEFLOPPY_MEDIA_CHANGED, &floppy->flags); + floppy->flags |= IDEFLOPPY_FLAG_MEDIA_CHANGED; /* IOMEGA Clik! drives do not support lock/unlock commands */ - if (!test_bit(IDEFLOPPY_CLIK_DRIVE, &floppy->flags)) { + if (!(floppy->flags & IDEFLOPPY_FLAG_CLIK_DRIVE)) { idefloppy_create_prevent_cmd(&pc, 1); (void) idefloppy_queue_pc_tail(drive, &pc); } check_disk_change(inode->i_bdev); - } else if (test_bit(IDEFLOPPY_FORMAT_IN_PROGRESS, &floppy->flags)) { + } else if (floppy->flags & IDEFLOPPY_FLAG_FORMAT_IN_PROGRESS) { ret = -EBUSY; goto out_put_floppy; } @@ -1527,12 +1537,12 @@ static int idefloppy_release(struct inode *inode, struct file *filp) if (floppy->openers == 1) { /* IOMEGA Clik! drives do not support lock/unlock commands */ - if (!test_bit(IDEFLOPPY_CLIK_DRIVE, &floppy->flags)) { + if (!(floppy->flags & IDEFLOPPY_FLAG_CLIK_DRIVE)) { idefloppy_create_prevent_cmd(&pc, 0); (void) idefloppy_queue_pc_tail(drive, &pc); } - clear_bit(IDEFLOPPY_FORMAT_IN_PROGRESS, &floppy->flags); + floppy->flags &= ~IDEFLOPPY_FLAG_FORMAT_IN_PROGRESS; } floppy->openers--; @@ -1561,7 +1571,7 @@ static int ide_floppy_lockdoor(idefloppy_floppy_t *floppy, idefloppy_pc_t *pc, /* The IOMEGA Clik! Drive doesn't support this command - * no room for an eject mechanism */ - if (!test_bit(IDEFLOPPY_CLIK_DRIVE, &floppy->flags)) { + if (!(floppy->flags & IDEFLOPPY_FLAG_CLIK_DRIVE)) { int prevent = arg ? 1 : 0; if (cmd == CDROMEJECT) @@ -1587,11 +1597,11 @@ static int ide_floppy_format_unit(idefloppy_floppy_t *floppy, if (floppy->openers > 1) { /* Don't format if someone is using the disk */ - clear_bit(IDEFLOPPY_FORMAT_IN_PROGRESS, &floppy->flags); + floppy->flags &= ~IDEFLOPPY_FLAG_FORMAT_IN_PROGRESS; return -EBUSY; } - set_bit(IDEFLOPPY_FORMAT_IN_PROGRESS, &floppy->flags); + floppy->flags |= IDEFLOPPY_FLAG_FORMAT_IN_PROGRESS; /* * Send ATAPI_FORMAT_UNIT to the drive. @@ -1623,7 +1633,7 @@ static int ide_floppy_format_unit(idefloppy_floppy_t *floppy, out: if (err) - clear_bit(IDEFLOPPY_FORMAT_IN_PROGRESS, &floppy->flags); + floppy->flags &= ~IDEFLOPPY_FLAG_FORMAT_IN_PROGRESS; return err; } @@ -1676,13 +1686,16 @@ static int idefloppy_media_changed(struct gendisk *disk) { struct ide_floppy_obj *floppy = ide_floppy_g(disk); ide_drive_t *drive = floppy->drive; + int ret; /* do not scan partitions twice if this is a removable device */ if (drive->attach) { drive->attach = 0; return 0; } - return test_and_clear_bit(IDEFLOPPY_MEDIA_CHANGED, &floppy->flags); + ret = !!(floppy->flags & IDEFLOPPY_FLAG_MEDIA_CHANGED); + floppy->flags &= ~IDEFLOPPY_FLAG_MEDIA_CHANGED; + return ret; } static int idefloppy_revalidate_disk(struct gendisk *disk) -- cgit v1.2.3 From 0571c7a4f58fc6070fb9d556e4896de864c2a593 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Sat, 2 Feb 2008 19:56:38 +0100 Subject: ide-floppy: fix most of the remaining checkpatch.pl issues such as ERROR: switch and case should be at the same indent ERROR: need spaces around that '=' (ctx:VxV) ERROR: trailing statements should be on next line WARNING: no space between function name and open parenthesis '(' WARNING: printk() should include KERN_ facility level ERROR: That open brace { should be on the previous line ERROR: use tabs not spaces ERROR: do not use assignment in if condition WARNING: braces {} are not necessary for single statement blocks ERROR: need space after that ',' (ctx:VxV) WARNING: line over 80 characters ERROR: do not use assignment in if condition ... and so on. Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-floppy.c | 355 +++++++++++++++++++++-------------------------- 1 file changed, 160 insertions(+), 195 deletions(-) diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index ac66622a357..864ccd1caba 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -4,9 +4,7 @@ * Copyright (C) 1996-1999 Gadi Oxman * Copyright (C) 2000-2002 Paul Bristow * Copyright (C) 2005 Bartlomiej Zolnierkiewicz - */ - -/* + * * The driver currently doesn't have any fancy features, just the bare * minimum read/write support. * @@ -51,57 +49,56 @@ #define IDEFLOPPY_DEBUG_LOG 0 /* #define IDEFLOPPY_DEBUG(fmt, args...) printk(KERN_INFO fmt, ## args) */ -#define IDEFLOPPY_DEBUG( fmt, args... ) +#define IDEFLOPPY_DEBUG(fmt, args...) #if IDEFLOPPY_DEBUG_LOG #define debug_log(fmt, args...) \ printk(KERN_INFO "ide-floppy: " fmt, ## args) #else -#define debug_log(fmt, args... ) do {} while(0) +#define debug_log(fmt, args...) do {} while (0) #endif -/* - * Some drives require a longer irq timeout. - */ +/* Some drives require a longer irq timeout. */ #define IDEFLOPPY_WAIT_CMD (5 * WAIT_CMD) /* - * After each failed packet command we issue a request sense command - * and retry the packet command IDEFLOPPY_MAX_PC_RETRIES times. + * After each failed packet command we issue a request sense command and retry + * the packet command IDEFLOPPY_MAX_PC_RETRIES times. */ #define IDEFLOPPY_MAX_PC_RETRIES 3 /* - * With each packet command, we allocate a buffer of - * IDEFLOPPY_PC_BUFFER_SIZE bytes. + * With each packet command, we allocate a buffer of IDEFLOPPY_PC_BUFFER_SIZE + * bytes. */ #define IDEFLOPPY_PC_BUFFER_SIZE 256 /* - * In various places in the driver, we need to allocate storage - * for packet commands and requests, which will remain valid while - * we leave the driver to wait for an interrupt or a timeout event. + * In various places in the driver, we need to allocate storage for packet + * commands and requests, which will remain valid while we leave the driver to + * wait for an interrupt or a timeout event. */ #define IDEFLOPPY_PC_STACK (10 + IDEFLOPPY_MAX_PC_RETRIES) -/* - * Our view of a packet command. - */ typedef struct idefloppy_packet_command_s { u8 c[12]; /* Actual packet bytes */ - int retries; /* On each retry, we increment retries */ + int retries; /* On each retry, we increment + retries */ int error; /* Error code */ int request_transfer; /* Bytes to transfer */ int actually_transferred; /* Bytes actually transferred */ int buffer_size; /* Size of our data buffer */ - int b_count; /* Missing/Available data on the current buffer */ + int b_count; /* Missing/Available data on + the current buffer */ struct request *rq; /* The corresponding request */ u8 *buffer; /* Data buffer */ - u8 *current_position; /* Pointer into the above buffer */ - void (*callback) (ide_drive_t *); /* Called when this packet command is completed */ + u8 *current_position; /* Pointer into above buffer */ + void (*callback) (ide_drive_t *); /* Called when this packet + command is completed */ u8 pc_buffer[IDEFLOPPY_PC_BUFFER_SIZE]; /* Temporary buffer */ - unsigned long flags; /* Status/Action bit flags: long for set_bit */ + unsigned long flags; /* Status/Action bit flags: long + for set_bit */ } idefloppy_pc_t; /* Packet command flag bits. */ @@ -125,9 +122,9 @@ enum { #define CAPACITY_NO_CARTRIDGE 0x03 /* - * Most of our global data which we need to save even as we leave the - * driver due to an interrupt or a timer event is stored in a variable - * of type idefloppy_floppy_t, defined below. + * Most of our global data which we need to save even as we leave the driver + * due to an interrupt or a timer event is stored in a variable of type + * idefloppy_floppy_t, defined below. */ typedef struct ide_floppy_obj { ide_drive_t *drive; @@ -148,17 +145,13 @@ typedef struct ide_floppy_obj { /* We implement a circular array */ int rq_stack_index; - /* - * Last error information - */ + /* Last error information */ u8 sense_key, asc, ascq; /* delay this long before sending packet command */ u8 ticks; int progress_indication; - /* - * Device information - */ + /* Device information */ /* Current format */ int blocks, block_size, bs_factor; /* Last format capacity descriptor */ @@ -189,34 +182,26 @@ enum { IDEFLOPPY_FLAG_ZIP_DRIVE = (1 << 4), }; -/* - * Defines for the mode sense command - */ +/* Defines for the MODE SENSE command */ #define MODE_SENSE_CURRENT 0x00 #define MODE_SENSE_CHANGEABLE 0x01 -#define MODE_SENSE_DEFAULT 0x02 +#define MODE_SENSE_DEFAULT 0x02 #define MODE_SENSE_SAVED 0x03 -/* - * IOCTLs used in low-level formatting. - */ - +/* IOCTLs used in low-level formatting. */ #define IDEFLOPPY_IOCTL_FORMAT_SUPPORTED 0x4600 #define IDEFLOPPY_IOCTL_FORMAT_GET_CAPACITY 0x4601 #define IDEFLOPPY_IOCTL_FORMAT_START 0x4602 #define IDEFLOPPY_IOCTL_FORMAT_GET_PROGRESS 0x4603 -/* - * Error codes which are returned in rq->errors to the higher part - * of the driver. - */ +/* Error code returned in rq->errors to the higher part of the driver. */ #define IDEFLOPPY_ERROR_GENERAL 101 /* - * The following is used to format the general configuration word of - * the ATAPI IDENTIFY DEVICE command. + * The following is used to format the general configuration word of the + * ATAPI IDENTIFY DEVICE command. */ -struct idefloppy_id_gcw { +struct idefloppy_id_gcw { #if defined(__LITTLE_ENDIAN_BITFIELD) unsigned packet_size :2; /* Packet Size */ unsigned reserved234 :3; /* Reserved */ @@ -274,10 +259,10 @@ static void ide_floppy_put(struct ide_floppy_obj *floppy) } /* - * Too bad. The drive wants to send us data which we are not ready to accept. - * Just throw it away. + * Too bad. The drive wants to send us data which we are not ready to accept. + * Just throw it away. */ -static void idefloppy_discard_data (ide_drive_t *drive, unsigned int bcount) +static void idefloppy_discard_data(ide_drive_t *drive, unsigned int bcount) { while (bcount--) (void) HWIF(drive)->INB(IDE_DATA_REG); @@ -291,10 +276,8 @@ static void idefloppy_write_zeros(ide_drive_t *drive, unsigned int bcount) /* - * idefloppy_do_end_request is used to finish servicing a request. - * - * For read/write requests, we will call ide_end_request to pass to the - * next buffer. + * Used to finish servicing a request. For read/write requests, we will call + * ide_end_request to pass to the next buffer. */ static int idefloppy_do_end_request(ide_drive_t *drive, int uptodate, int nsecs) { @@ -305,9 +288,9 @@ static int idefloppy_do_end_request(ide_drive_t *drive, int uptodate, int nsecs) debug_log("Reached %s\n", __func__); switch (uptodate) { - case 0: error = IDEFLOPPY_ERROR_GENERAL; break; - case 1: error = 0; break; - default: error = uptodate; + case 0: error = IDEFLOPPY_ERROR_GENERAL; break; + case 1: error = 0; break; + default: error = uptodate; } if (error) floppy->failed_pc = NULL; @@ -366,7 +349,7 @@ static void ide_floppy_io_buffers(ide_drive_t *drive, idefloppy_pc_t *pc, } } -static void idefloppy_update_buffers (ide_drive_t *drive, idefloppy_pc_t *pc) +static void idefloppy_update_buffers(ide_drive_t *drive, idefloppy_pc_t *pc) { struct request *rq = pc->rq; struct bio *bio = rq->bio; @@ -376,11 +359,12 @@ static void idefloppy_update_buffers (ide_drive_t *drive, idefloppy_pc_t *pc) } /* - * idefloppy_queue_pc_head generates a new packet command request in front - * of the request queue, before the current request, so that it will be - * processed immediately, on the next pass through the driver. + * Generate a new packet command request in front of the request queue, before + * the current request so that it will be processed immediately, on the next + * pass through the driver. */ -static void idefloppy_queue_pc_head (ide_drive_t *drive,idefloppy_pc_t *pc,struct request *rq) +static void idefloppy_queue_pc_head(ide_drive_t *drive, idefloppy_pc_t *pc, + struct request *rq) { struct ide_floppy_obj *floppy = drive->driver_data; @@ -391,16 +375,16 @@ static void idefloppy_queue_pc_head (ide_drive_t *drive,idefloppy_pc_t *pc,struc (void) ide_do_drive_cmd(drive, rq, ide_preempt); } -static idefloppy_pc_t *idefloppy_next_pc_storage (ide_drive_t *drive) +static idefloppy_pc_t *idefloppy_next_pc_storage(ide_drive_t *drive) { idefloppy_floppy_t *floppy = drive->driver_data; if (floppy->pc_stack_index == IDEFLOPPY_PC_STACK) - floppy->pc_stack_index=0; + floppy->pc_stack_index = 0; return (&floppy->pc_stack[floppy->pc_stack_index++]); } -static struct request *idefloppy_next_rq_storage (ide_drive_t *drive) +static struct request *idefloppy_next_rq_storage(ide_drive_t *drive) { idefloppy_floppy_t *floppy = drive->driver_data; @@ -445,10 +429,8 @@ static void idefloppy_request_sense_callback(ide_drive_t *drive) } } -/* - * General packet command callback function. - */ -static void idefloppy_pc_callback (ide_drive_t *drive) +/* General packet command callback function. */ +static void idefloppy_pc_callback(ide_drive_t *drive) { idefloppy_floppy_t *floppy = drive->driver_data; @@ -457,10 +439,7 @@ static void idefloppy_pc_callback (ide_drive_t *drive) idefloppy_do_end_request(drive, floppy->pc->error ? 0 : 1, 0); } -/* - * idefloppy_init_pc initializes a packet command. - */ -static void idefloppy_init_pc (idefloppy_pc_t *pc) +static void idefloppy_init_pc(idefloppy_pc_t *pc) { memset(pc->c, 0, 12); pc->retries = 0; @@ -471,7 +450,7 @@ static void idefloppy_init_pc (idefloppy_pc_t *pc) pc->callback = &idefloppy_pc_callback; } -static void idefloppy_create_request_sense_cmd (idefloppy_pc_t *pc) +static void idefloppy_create_request_sense_cmd(idefloppy_pc_t *pc) { idefloppy_init_pc(pc); pc->c[0] = GPCMD_REQUEST_SENSE; @@ -481,11 +460,10 @@ static void idefloppy_create_request_sense_cmd (idefloppy_pc_t *pc) } /* - * idefloppy_retry_pc is called when an error was detected during the - * last packet command. We queue a request sense packet command in - * the head of the request list. + * Called when an error was detected during the last packet command. We queue a + * request sense packet command in the head of the request list. */ -static void idefloppy_retry_pc (ide_drive_t *drive) +static void idefloppy_retry_pc(ide_drive_t *drive) { idefloppy_pc_t *pc; struct request *rq; @@ -528,7 +506,8 @@ static ide_startstop_t idefloppy_pc_intr (ide_drive_t *drive) /* Clear the interrupt */ stat = drive->hwif->INB(IDE_STATUS_REG); - if ((stat & DRQ_STAT) == 0) { /* No more interrupts */ + /* No more interrupts */ + if ((stat & DRQ_STAT) == 0) { debug_log("Packet command completed, %d bytes transferred\n", pc->actually_transferred); pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS; @@ -628,7 +607,7 @@ static ide_startstop_t idefloppy_pc_intr (ide_drive_t *drive) * It fails at high speeds on the Iomega ZIP drive, so there's a slower version * for that drive below. The algorithm is chosen based on drive type */ -static ide_startstop_t idefloppy_transfer_pc (ide_drive_t *drive) +static ide_startstop_t idefloppy_transfer_pc(ide_drive_t *drive) { ide_startstop_t startstop; idefloppy_floppy_t *floppy = drive->driver_data; @@ -655,18 +634,16 @@ static ide_startstop_t idefloppy_transfer_pc (ide_drive_t *drive) /* - * What we have here is a classic case of a top half / bottom half - * interrupt service routine. In interrupt mode, the device sends - * an interrupt to signal it's ready to receive a packet. However, - * we need to delay about 2-3 ticks before issuing the packet or we - * gets in trouble. + * What we have here is a classic case of a top half / bottom half interrupt + * service routine. In interrupt mode, the device sends an interrupt to signal + * that it is ready to receive a packet. However, we need to delay about 2-3 + * ticks before issuing the packet or we gets in trouble. * - * So, follow carefully. transfer_pc1 is called as an interrupt (or - * directly). In either case, when the device says it's ready for a - * packet, we schedule the packet transfer to occur about 2-3 ticks - * later in transfer_pc2. + * So, follow carefully. transfer_pc1 is called as an interrupt (or directly). + * In either case, when the device says it's ready for a packet, we schedule + * the packet transfer to occur about 2-3 ticks later in transfer_pc2. */ -static int idefloppy_transfer_pc2 (ide_drive_t *drive) +static int idefloppy_transfer_pc2(ide_drive_t *drive) { idefloppy_floppy_t *floppy = drive->driver_data; @@ -676,7 +653,7 @@ static int idefloppy_transfer_pc2 (ide_drive_t *drive) return IDEFLOPPY_WAIT_CMD; } -static ide_startstop_t idefloppy_transfer_pc1 (ide_drive_t *drive) +static ide_startstop_t idefloppy_transfer_pc1(ide_drive_t *drive) { idefloppy_floppy_t *floppy = drive->driver_data; ide_startstop_t startstop; @@ -693,7 +670,7 @@ static ide_startstop_t idefloppy_transfer_pc1 (ide_drive_t *drive) "while issuing a packet command\n"); return ide_do_reset(drive); } - /* + /* * The following delay solves a problem with ATAPI Zip 100 drives * where the Busy flag was apparently being deasserted before the * unit was ready to receive data. This was happening on a @@ -702,10 +679,8 @@ static ide_startstop_t idefloppy_transfer_pc1 (ide_drive_t *drive) * used until after the packet is moved in about 50 msec. */ - ide_set_handler(drive, - &idefloppy_pc_intr, /* service routine for packet command */ - floppy->ticks, /* wait this long before "failing" */ - &idefloppy_transfer_pc2); /* fail == transfer_pc2 */ + ide_set_handler(drive, &idefloppy_pc_intr, floppy->ticks, + &idefloppy_transfer_pc2); return ide_started; } @@ -725,10 +700,8 @@ static void ide_floppy_report_error(idefloppy_floppy_t *floppy, } -/* - * Issue a packet command - */ -static ide_startstop_t idefloppy_issue_pc (ide_drive_t *drive, idefloppy_pc_t *pc) +static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive, + idefloppy_pc_t *pc) { idefloppy_floppy_t *floppy = drive->driver_data; ide_hwif_t *hwif = drive->hwif; @@ -773,7 +746,8 @@ static ide_startstop_t idefloppy_issue_pc (ide_drive_t *drive, idefloppy_pc_t *p ide_pktcmd_tf_load(drive, IDE_TFLAG_NO_SELECT_MASK | IDE_TFLAG_OUT_DEVICE, bcount, dma); - if (dma) { /* Begin DMA, if necessary */ + if (dma) { + /* Begin DMA, if necessary */ pc->flags |= PC_FLAG_DMA_IN_PROGRESS; hwif->dma_start(drive); } @@ -801,7 +775,7 @@ static ide_startstop_t idefloppy_issue_pc (ide_drive_t *drive, idefloppy_pc_t *p } } -static void idefloppy_rw_callback (ide_drive_t *drive) +static void idefloppy_rw_callback(ide_drive_t *drive) { debug_log("Reached %s\n", __func__); @@ -809,7 +783,7 @@ static void idefloppy_rw_callback (ide_drive_t *drive) return; } -static void idefloppy_create_prevent_cmd (idefloppy_pc_t *pc, int prevent) +static void idefloppy_create_prevent_cmd(idefloppy_pc_t *pc, int prevent) { debug_log("creating prevent removal command, prevent = %d\n", prevent); @@ -818,7 +792,7 @@ static void idefloppy_create_prevent_cmd (idefloppy_pc_t *pc, int prevent) pc->c[4] = prevent; } -static void idefloppy_create_read_capacity_cmd (idefloppy_pc_t *pc) +static void idefloppy_create_read_capacity_cmd(idefloppy_pc_t *pc) { idefloppy_init_pc(pc); pc->c[0] = GPCMD_READ_FORMAT_CAPACITIES; @@ -827,7 +801,7 @@ static void idefloppy_create_read_capacity_cmd (idefloppy_pc_t *pc) pc->request_transfer = 255; } -static void idefloppy_create_format_unit_cmd (idefloppy_pc_t *pc, int b, int l, +static void idefloppy_create_format_unit_cmd(idefloppy_pc_t *pc, int b, int l, int flags) { idefloppy_init_pc(pc); @@ -844,38 +818,37 @@ static void idefloppy_create_format_unit_cmd (idefloppy_pc_t *pc, int b, int l, put_unaligned(cpu_to_be32(b), (unsigned int *)(&pc->buffer[4])); put_unaligned(cpu_to_be32(l), (unsigned int *)(&pc->buffer[8])); - pc->buffer_size=12; + pc->buffer_size = 12; pc->flags |= PC_FLAG_WRITING; } -/* - * A mode sense command is used to "sense" floppy parameters. - */ -static void idefloppy_create_mode_sense_cmd (idefloppy_pc_t *pc, u8 page_code, u8 type) +/* A mode sense command is used to "sense" floppy parameters. */ +static void idefloppy_create_mode_sense_cmd(idefloppy_pc_t *pc, u8 page_code, + u8 type) { u16 length = 8; /* sizeof(Mode Parameter Header) = 8 Bytes */ - + idefloppy_init_pc(pc); pc->c[0] = GPCMD_MODE_SENSE_10; pc->c[1] = 0; pc->c[2] = page_code + (type << 6); switch (page_code) { - case IDEFLOPPY_CAPABILITIES_PAGE: - length += 12; - break; - case IDEFLOPPY_FLEXIBLE_DISK_PAGE: - length += 32; - break; - default: - printk(KERN_ERR "ide-floppy: unsupported page code " + case IDEFLOPPY_CAPABILITIES_PAGE: + length += 12; + break; + case IDEFLOPPY_FLEXIBLE_DISK_PAGE: + length += 32; + break; + default: + printk(KERN_ERR "ide-floppy: unsupported page code " "in create_mode_sense_cmd\n"); } put_unaligned(cpu_to_be16(length), (u16 *) &pc->c[7]); pc->request_transfer = length; } -static void idefloppy_create_start_stop_cmd (idefloppy_pc_t *pc, int start) +static void idefloppy_create_start_stop_cmd(idefloppy_pc_t *pc, int start) { idefloppy_init_pc(pc); pc->c[0] = GPCMD_START_STOP_UNIT; @@ -914,8 +887,8 @@ static void idefloppy_create_rw_cmd(idefloppy_floppy_t *floppy, pc->flags |= PC_FLAG_DMA_RECOMMENDED; } -static void -idefloppy_blockpc_cmd(idefloppy_floppy_t *floppy, idefloppy_pc_t *pc, struct request *rq) +static void idefloppy_blockpc_cmd(idefloppy_floppy_t *floppy, + idefloppy_pc_t *pc, struct request *rq) { idefloppy_init_pc(pc); pc->callback = &idefloppy_rw_callback; @@ -934,10 +907,8 @@ idefloppy_blockpc_cmd(idefloppy_floppy_t *floppy, idefloppy_pc_t *pc, struct req pc->request_transfer = pc->buffer_size = rq->data_len; } -/* - * idefloppy_do_request is our request handling function. - */ -static ide_startstop_t idefloppy_do_request (ide_drive_t *drive, struct request *rq, sector_t block_s) +static ide_startstop_t idefloppy_do_request(ide_drive_t *drive, + struct request *rq, sector_t block_s) { idefloppy_floppy_t *floppy = drive->driver_data; idefloppy_pc_t *pc; @@ -962,8 +933,8 @@ static ide_startstop_t idefloppy_do_request (ide_drive_t *drive, struct request if (blk_fs_request(rq)) { if (((long)rq->sector % floppy->bs_factor) || (rq->nr_sectors % floppy->bs_factor)) { - printk("%s: unsupported r/w request size\n", - drive->name); + printk(KERN_ERR "%s: unsupported r/w request size\n", + drive->name); idefloppy_do_end_request(drive, 0, 0); return ide_stopped; } @@ -986,15 +957,15 @@ static ide_startstop_t idefloppy_do_request (ide_drive_t *drive, struct request } /* - * idefloppy_queue_pc_tail adds a special packet command request to the - * tail of the request queue, and waits for it to be serviced. + * Add a special packet command request to the tail of the request queue, + * and wait for it to be serviced. */ -static int idefloppy_queue_pc_tail (ide_drive_t *drive,idefloppy_pc_t *pc) +static int idefloppy_queue_pc_tail(ide_drive_t *drive, idefloppy_pc_t *pc) { struct ide_floppy_obj *floppy = drive->driver_data; struct request rq; - ide_init_drive_cmd (&rq); + ide_init_drive_cmd(&rq); rq.buffer = (char *) pc; rq.cmd_type = REQ_TYPE_SPECIAL; rq.rq_disk = floppy->disk; @@ -1121,7 +1092,7 @@ static int ide_floppy_get_capacity(ide_drive_t *drive) /* Clik! drive returns this instead of CAPACITY_CURRENT */ case CAPACITY_UNFORMATTED: if (!(floppy->flags & IDEFLOPPY_FLAG_CLIK_DRIVE)) - /* + /* * If it is not a clik drive, break out * (maintains previous driver behaviour) */ @@ -1247,14 +1218,14 @@ static int ide_floppy_get_format_capacities(ide_drive_t *drive, int __user *arg) } /* -** Get ATAPI_FORMAT_UNIT progress indication. -** -** Userland gives a pointer to an int. The int is set to a progress -** indicator 0-65536, with 65536=100%. -** -** If the drive does not support format progress indication, we just check -** the dsc bit, and return either 0 or 65536. -*/ + * Get ATAPI_FORMAT_UNIT progress indication. + * + * Userland gives a pointer to an int. The int is set to a progress + * indicator 0-65536, with 65536=100%. + * + * If the drive does not support format progress indication, we just check + * the dsc bit, and return either 0 or 65536. + */ static int idefloppy_get_format_progress(ide_drive_t *drive, int __user *arg) { @@ -1264,17 +1235,15 @@ static int idefloppy_get_format_progress(ide_drive_t *drive, int __user *arg) if (floppy->srfp) { idefloppy_create_request_sense_cmd(&pc); - if (idefloppy_queue_pc_tail(drive, &pc)) { + if (idefloppy_queue_pc_tail(drive, &pc)) return (-EIO); - } if (floppy->sense_key == 2 && floppy->asc == 4 && - floppy->ascq == 4) { + floppy->ascq == 4) progress_indication = floppy->progress_indication; - } - /* Else assume format_unit has finished, and we're - ** at 0x10000 */ + + /* Else assume format_unit has finished, and we're at 0x10000 */ } else { unsigned long flags; u8 stat; @@ -1291,10 +1260,7 @@ static int idefloppy_get_format_progress(ide_drive_t *drive, int __user *arg) return (0); } -/* - * Return the current floppy capacity. - */ -static sector_t idefloppy_capacity (ide_drive_t *drive) +static sector_t idefloppy_capacity(ide_drive_t *drive) { idefloppy_floppy_t *floppy = drive->driver_data; unsigned long capacity = floppy->blocks * floppy->bs_factor; @@ -1344,22 +1310,20 @@ static void idefloppy_add_settings(ide_drive_t *drive) { idefloppy_floppy_t *floppy = drive->driver_data; -/* - * drive setting name read/write data type min max mul_factor div_factor data pointer set function - */ - ide_add_setting(drive, "bios_cyl", SETTING_RW, TYPE_INT, 0, 1023, 1, 1, &drive->bios_cyl, NULL); - ide_add_setting(drive, "bios_head", SETTING_RW, TYPE_BYTE, 0, 255, 1, 1, &drive->bios_head, NULL); - ide_add_setting(drive, "bios_sect", SETTING_RW, TYPE_BYTE, 0, 63, 1, 1, &drive->bios_sect, NULL); - ide_add_setting(drive, "ticks", SETTING_RW, TYPE_BYTE, 0, 255, 1, 1, &floppy->ticks, NULL); + ide_add_setting(drive, "bios_cyl", SETTING_RW, TYPE_INT, 0, 1023, 1, 1, + &drive->bios_cyl, NULL); + ide_add_setting(drive, "bios_head", SETTING_RW, TYPE_BYTE, 0, 255, 1, 1, + &drive->bios_head, NULL); + ide_add_setting(drive, "bios_sect", SETTING_RW, TYPE_BYTE, 0, 63, 1, 1, + &drive->bios_sect, NULL); + ide_add_setting(drive, "ticks", SETTING_RW, TYPE_BYTE, 0, 255, 1, 1, + &floppy->ticks, NULL); } #else static inline void idefloppy_add_settings(ide_drive_t *drive) { ; } #endif -/* - * Driver initialization. - */ -static void idefloppy_setup (ide_drive_t *drive, idefloppy_floppy_t *floppy) +static void idefloppy_setup(ide_drive_t *drive, idefloppy_floppy_t *floppy) { struct idefloppy_id_gcw gcw; @@ -1368,16 +1332,14 @@ static void idefloppy_setup (ide_drive_t *drive, idefloppy_floppy_t *floppy) if (gcw.drq_type == 1) floppy->flags |= IDEFLOPPY_FLAG_DRQ_INTERRUPT; /* - * We used to check revisions here. At this point however - * I'm giving up. Just assume they are all broken, its easier. + * We used to check revisions here. At this point however I'm giving up. + * Just assume they are all broken, its easier. * - * The actual reason for the workarounds was likely - * a driver bug after all rather than a firmware bug, - * and the workaround below used to hide it. It should - * be fixed as of version 1.9, but to be on the safe side - * we'll leave the limitation below for the 2.2.x tree. + * The actual reason for the workarounds was likely a driver bug after + * all rather than a firmware bug, and the workaround below used to hide + * it. It should be fixed as of version 1.9, but to be on the safe side + * we'll leave the limitation below for the 2.2.x tree. */ - if (!strncmp(drive->id->model, "IOMEGA ZIP 100 ATAPI", 20)) { floppy->flags |= IDEFLOPPY_FLAG_ZIP_DRIVE; /* This value will be visible in the /proc/ide/hdx/settings */ @@ -1386,16 +1348,14 @@ static void idefloppy_setup (ide_drive_t *drive, idefloppy_floppy_t *floppy) } /* - * Guess what? The IOMEGA Clik! drive also needs the - * above fix. It makes nasty clicking noises without - * it, so please don't remove this. - */ + * Guess what? The IOMEGA Clik! drive also needs the above fix. It makes + * nasty clicking noises without it, so please don't remove this. + */ if (strncmp(drive->id->model, "IOMEGA Clik!", 11) == 0) { blk_queue_max_sectors(drive->queue, 64); floppy->flags |= IDEFLOPPY_FLAG_CLIK_DRIVE; } - (void) ide_floppy_get_capacity(drive); idefloppy_add_settings(drive); } @@ -1425,19 +1385,19 @@ static void idefloppy_cleanup_obj(struct kref *kref) } #ifdef CONFIG_IDE_PROC_FS -static int proc_idefloppy_read_capacity - (char *page, char **start, off_t off, int count, int *eof, void *data) +static int proc_idefloppy_read_capacity(char *page, char **start, off_t off, + int count, int *eof, void *data) { ide_drive_t*drive = (ide_drive_t *)data; int len; - len = sprintf(page,"%llu\n", (long long)idefloppy_capacity(drive)); - PROC_IDE_READ_RETURN(page,start,off,count,eof,len); + len = sprintf(page, "%llu\n", (long long)idefloppy_capacity(drive)); + PROC_IDE_READ_RETURN(page, start, off, count, eof, len); } static ide_proc_entry_t idefloppy_proc[] = { - { "capacity", S_IFREG|S_IRUGO, proc_idefloppy_read_capacity, NULL }, - { "geometry", S_IFREG|S_IRUGO, proc_ide_read_geometry, NULL }, + { "capacity", S_IFREG|S_IRUGO, proc_idefloppy_read_capacity, NULL }, + { "geometry", S_IFREG|S_IRUGO, proc_ide_read_geometry, NULL }, { NULL, 0, NULL, NULL } }; #endif /* CONFIG_IDE_PROC_FS */ @@ -1474,7 +1434,8 @@ static int idefloppy_open(struct inode *inode, struct file *filp) debug_log("Reached %s\n", __func__); - if (!(floppy = ide_floppy_get(disk))) + floppy = ide_floppy_get(disk); + if (!floppy) return -ENXIO; drive = floppy->drive; @@ -1494,10 +1455,10 @@ static int idefloppy_open(struct inode *inode, struct file *filp) if (ide_floppy_get_capacity(drive) && (filp->f_flags & O_NDELAY) == 0 /* - ** Allow O_NDELAY to open a drive without a disk, or with - ** an unreadable disk, so that we can get the format - ** capacity of the drive or begin the format - Sam - */ + * Allow O_NDELAY to open a drive without a disk, or with an + * unreadable disk, so that we can get the format capacity + * of the drive or begin the format - Sam + */ ) { ret = -EIO; goto out_put_floppy; @@ -1726,16 +1687,20 @@ static int ide_floppy_probe(ide_drive_t *drive) goto failed; if (drive->media != ide_floppy) goto failed; - if (!idefloppy_identify_device (drive, drive->id)) { - printk (KERN_ERR "ide-floppy: %s: not supported by this version of ide-floppy\n", drive->name); + if (!idefloppy_identify_device(drive, drive->id)) { + printk(KERN_ERR "ide-floppy: %s: not supported by this version" + " of ide-floppy\n", drive->name); goto failed; } if (drive->scsi) { - printk("ide-floppy: passing drive %s to ide-scsi emulation.\n", drive->name); + printk(KERN_INFO "ide-floppy: passing drive %s to ide-scsi" + " emulation.\n", drive->name); goto failed; } - if ((floppy = kzalloc(sizeof (idefloppy_floppy_t), GFP_KERNEL)) == NULL) { - printk (KERN_ERR "ide-floppy: %s: Can't allocate a floppy structure\n", drive->name); + floppy = kzalloc(sizeof(idefloppy_floppy_t), GFP_KERNEL); + if (!floppy) { + printk(KERN_ERR "ide-floppy: %s: Can't allocate a floppy" + " structure\n", drive->name); goto failed; } @@ -1757,7 +1722,7 @@ static int ide_floppy_probe(ide_drive_t *drive) drive->driver_data = floppy; - idefloppy_setup (drive, floppy); + idefloppy_setup(drive, floppy); g->minors = 1 << PARTN_BITS; g->driverfs_dev = &drive->gendev; @@ -1773,9 +1738,7 @@ failed: return -ENODEV; } -MODULE_DESCRIPTION("ATAPI FLOPPY Driver"); - -static void __exit idefloppy_exit (void) +static void __exit idefloppy_exit(void) { driver_unregister(&idefloppy_driver.gen_driver); } @@ -1790,3 +1753,5 @@ MODULE_ALIAS("ide:*m-floppy*"); module_init(idefloppy_init); module_exit(idefloppy_exit); MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("ATAPI FLOPPY Driver"); + -- cgit v1.2.3 From fc6c5bc7c158d7ee7bb6e9ac1c64ae80da3d1580 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Sat, 2 Feb 2008 19:56:38 +0100 Subject: ide-floppy: bump driver version number Acknowledge major ide-floppy code refactoring and cleanup by bumping the driver version number. Also, remove a wrong comment. Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-floppy.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index 864ccd1caba..f8fe6ee128f 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -5,9 +5,6 @@ * Copyright (C) 2000-2002 Paul Bristow * Copyright (C) 2005 Bartlomiej Zolnierkiewicz * - * The driver currently doesn't have any fancy features, just the bare - * minimum read/write support. - * * This driver supports the following IDE floppy drives: * * LS-120/240 SuperDisk @@ -18,7 +15,7 @@ * Documentation/ide/ChangeLog.ide-floppy.1996-2002 */ -#define IDEFLOPPY_VERSION "0.99.newide" +#define IDEFLOPPY_VERSION "1.00" #include #include -- cgit v1.2.3 From 1bee4d1dce2d76bcf0bf9565298c62666de0fa1d Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Sat, 2 Feb 2008 19:56:38 +0100 Subject: pdc202xx_old: remove surplus initialiser Bart: - drive-by CodingStyle fixups Signed-off-by: Alan Cox Cc: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/pci/pdc202xx_old.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ide/pci/pdc202xx_old.c b/drivers/ide/pci/pdc202xx_old.c index 9ee72c99d08..da432979038 100644 --- a/drivers/ide/pci/pdc202xx_old.c +++ b/drivers/ide/pci/pdc202xx_old.c @@ -138,7 +138,7 @@ static void pdc202xx_set_pio_mode(ide_drive_t *drive, const u8 pio) static u8 __devinit pdc2026x_old_cable_detect(ide_hwif_t *hwif) { struct pci_dev *dev = to_pci_dev(hwif->dev); - u16 CIS = 0, mask = (hwif->channel) ? (1<<11) : (1<<10); + u16 CIS, mask = hwif->channel ? (1 << 11) : (1 << 10); pci_read_config_word(dev, 0x50, &CIS); -- cgit v1.2.3 From 2244e850632f82466d7c041546326c7055fc7159 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sat, 2 Feb 2008 19:56:38 +0100 Subject: ide: remove redundant hwif->present check from ide_register_hw() We check earlier for hwif->present and call ide_unregister() if necessary (after ide_unregister() hwif->present will be always cleared). Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index eeb0e6a77f5..a71591ab0c5 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -720,8 +720,6 @@ found: ide_init_port_data(hwif, index); init_hwif_default(hwif, index); } - if (hwif->present) - return -1; ide_init_port_hw(hwif, hw); hwif->quirkproc = quirkproc; -- cgit v1.2.3 From ead741df385607ab74876afdb05fd8ac27da9906 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sat, 2 Feb 2008 19:56:38 +0100 Subject: ide: remove redundant init_hwif_default() call from ide_register_hw() ide_init_port_hw() call overrides setup done by init_hwif_default(). Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index a71591ab0c5..4b130e7102e 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -716,10 +716,8 @@ int ide_register_hw(hw_regs_t *hw, void (*quirkproc)(ide_drive_t *), found: if (hwif->present) ide_unregister(index); - else if (!hwif->hold) { + else if (!hwif->hold) ide_init_port_data(hwif, index); - init_hwif_default(hwif, index); - } ide_init_port_hw(hwif, hw); hwif->quirkproc = quirkproc; -- cgit v1.2.3 From f82c2b171905b6d5af92395d8159546351ab602f Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sat, 2 Feb 2008 19:56:39 +0100 Subject: ide: add 'init_default' and 'restore' arguments to ide_unregister() * Add 'init_default' (flag for calling init_hwif_default()) and 'restore' (flag for calling ide_hwif_restore()) arguments to ide_unregister(). * Update ide_unregister() users to set 'init_default' and 'restore' flags. * No need to set 'init_default' flag in ide_register_hw() if the setup done by init_hwif_default() is going to be overridden by ide_init_port_hw(). * No need to set 'init_default' and 'restore' flags in cleanup_module(). There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/arm/rapide.c | 2 +- drivers/ide/ide-pnp.c | 7 ++++--- drivers/ide/ide.c | 19 ++++++++++++------- drivers/ide/legacy/ide-cs.c | 2 +- drivers/ide/legacy/ide_platform.c | 2 +- drivers/ide/mips/au1xxx-ide.c | 2 +- drivers/ide/pci/delkin_cb.c | 3 ++- drivers/ide/pci/scc_pata.c | 2 +- drivers/macintosh/mediabay.c | 2 +- include/linux/ide.h | 2 +- 10 files changed, 25 insertions(+), 18 deletions(-) diff --git a/drivers/ide/arm/rapide.c b/drivers/ide/arm/rapide.c index b30adcf321c..823d3331318 100644 --- a/drivers/ide/arm/rapide.c +++ b/drivers/ide/arm/rapide.c @@ -76,7 +76,7 @@ static void __devexit rapide_remove(struct expansion_card *ec) ecard_set_drvdata(ec, NULL); - ide_unregister(hwif->index); + ide_unregister(hwif->index, 1, 1); ecard_release_resources(ec); } diff --git a/drivers/ide/ide-pnp.c b/drivers/ide/ide-pnp.c index 61c33ef64bd..a766bdbbad3 100644 --- a/drivers/ide/ide-pnp.c +++ b/drivers/ide/ide-pnp.c @@ -60,9 +60,10 @@ static int idepnp_probe(struct pnp_dev * dev, const struct pnp_device_id *dev_id static void idepnp_remove(struct pnp_dev * dev) { ide_hwif_t *hwif = pnp_get_drvdata(dev); - if (hwif) { - ide_unregister(hwif->index); - } else + + if (hwif) + ide_unregister(hwif->index, 1, 1); + else printk(KERN_ERR "idepnp: Unable to remove device, please report.\n"); } diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index 4b130e7102e..166acd513d5 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -499,6 +499,8 @@ void ide_remove_port_from_hwgroup(ide_hwif_t *hwif) /** * ide_unregister - free an IDE interface * @index: index of interface (will change soon to a pointer) + * @init_default: init default hwif flag + * @restore: restore hwif flag * * Perform the final unregister of an IDE interface. At the moment * we don't refcount interfaces so this will also get split up. @@ -518,7 +520,7 @@ void ide_remove_port_from_hwgroup(ide_hwif_t *hwif) * This is raving bonkers. */ -void ide_unregister(unsigned int index) +void ide_unregister(unsigned int index, int init_default, int restore) { ide_drive_t *drive; ide_hwif_t *hwif, *g; @@ -602,9 +604,12 @@ void ide_unregister(unsigned int index) /* restore hwif data to pristine status */ ide_init_port_data(hwif, index); - init_hwif_default(hwif, index); - ide_hwif_restore(hwif, &tmp_hwif); + if (init_default) + init_hwif_default(hwif, index); + + if (restore) + ide_hwif_restore(hwif, &tmp_hwif); abort: spin_unlock_irq(&ide_lock); @@ -710,12 +715,12 @@ int ide_register_hw(hw_regs_t *hw, void (*quirkproc)(ide_drive_t *), goto found; } for (index = 0; index < MAX_HWIFS; index++) - ide_unregister(index); + ide_unregister(index, 1, 1); } while (retry--); return -1; found: if (hwif->present) - ide_unregister(index); + ide_unregister(index, 0, 1); else if (!hwif->hold) ide_init_port_data(hwif, index); @@ -1058,7 +1063,7 @@ int generic_ide_ioctl(ide_drive_t *drive, struct file *file, struct block_device case HDIO_UNREGISTER_HWIF: if (!capable(CAP_SYS_RAWIO)) return -EACCES; /* (arg > MAX_HWIFS) checked in function */ - ide_unregister(arg); + ide_unregister(arg, 1, 1); return 0; case HDIO_SET_NICE: if (!capable(CAP_SYS_ADMIN)) return -EACCES; @@ -1703,7 +1708,7 @@ void __exit cleanup_module (void) int index; for (index = 0; index < MAX_HWIFS; ++index) - ide_unregister(index); + ide_unregister(index, 0, 0); proc_ide_destroy(); diff --git a/drivers/ide/legacy/ide-cs.c b/drivers/ide/legacy/ide-cs.c index 3bd29676ef6..2d772e2bebb 100644 --- a/drivers/ide/legacy/ide-cs.c +++ b/drivers/ide/legacy/ide-cs.c @@ -337,7 +337,7 @@ void ide_release(struct pcmcia_device *link) if (info->ndev) { /* FIXME: if this fails we need to queue the cleanup somehow -- need to investigate the required PCMCIA magic */ - ide_unregister(info->hd); + ide_unregister(info->hd, 1, 1); } info->ndev = 0; diff --git a/drivers/ide/legacy/ide_platform.c b/drivers/ide/legacy/ide_platform.c index 7c7f42a1fff..c0dd67f4af3 100644 --- a/drivers/ide/legacy/ide_platform.c +++ b/drivers/ide/legacy/ide_platform.c @@ -122,7 +122,7 @@ static int __devexit plat_ide_remove(struct platform_device *pdev) { ide_hwif_t *hwif = pdev->dev.driver_data; - ide_unregister(hwif->index); + ide_unregister(hwif->index, 1, 1); return 0; } diff --git a/drivers/ide/mips/au1xxx-ide.c b/drivers/ide/mips/au1xxx-ide.c index b80d77a260d..66a675a10f1 100644 --- a/drivers/ide/mips/au1xxx-ide.c +++ b/drivers/ide/mips/au1xxx-ide.c @@ -678,7 +678,7 @@ static int au_ide_remove(struct device *dev) ide_hwif_t *hwif = dev_get_drvdata(dev); _auide_hwif *ahwif = &auide_hwif; - ide_unregister(hwif->index); + ide_unregister(hwif->index, 1, 1); iounmap((void *)ahwif->regbase); diff --git a/drivers/ide/pci/delkin_cb.c b/drivers/ide/pci/delkin_cb.c index 3fdf5e5a6fb..4e9ebaa7962 100644 --- a/drivers/ide/pci/delkin_cb.c +++ b/drivers/ide/pci/delkin_cb.c @@ -99,7 +99,8 @@ delkin_cb_remove (struct pci_dev *dev) ide_hwif_t *hwif = pci_get_drvdata(dev); if (hwif) - ide_unregister(hwif->index); + ide_unregister(hwif->index, 1, 1); + pci_disable_device(dev); } diff --git a/drivers/ide/pci/scc_pata.c b/drivers/ide/pci/scc_pata.c index 085c1b58a99..7e52a55c86c 100644 --- a/drivers/ide/pci/scc_pata.c +++ b/drivers/ide/pci/scc_pata.c @@ -736,7 +736,7 @@ static void __devexit scc_remove(struct pci_dev *dev) hwif->dmatable_cpu = NULL; } - ide_unregister(hwif->index); + ide_unregister(hwif->index, 1, 1); hwif->chipset = ide_unknown; iounmap((void*)ports->dma); diff --git a/drivers/macintosh/mediabay.c b/drivers/macintosh/mediabay.c index 18dde2a2720..de9ebbfbf12 100644 --- a/drivers/macintosh/mediabay.c +++ b/drivers/macintosh/mediabay.c @@ -595,7 +595,7 @@ static void media_bay_step(int i) if (bay->cd_index >= 0) { printk(KERN_DEBUG "Unregistering mb %d ide, index:%d\n", i, bay->cd_index); - ide_unregister(bay->cd_index); + ide_unregister(bay->cd_index, 1, 1); bay->cd_index = -1; } if (bay->cd_retry) { diff --git a/include/linux/ide.h b/include/linux/ide.h index f7fe8b1fe68..8ae0480af00 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -1208,7 +1208,7 @@ static inline void ide_acpi_set_state(ide_hwif_t *hwif, int on) {} void ide_remove_port_from_hwgroup(ide_hwif_t *); extern int ide_hwif_request_regions(ide_hwif_t *hwif); extern void ide_hwif_release_regions(ide_hwif_t* hwif); -extern void ide_unregister (unsigned int index); +void ide_unregister(unsigned int, int, int); void ide_register_region(struct gendisk *); void ide_unregister_region(struct gendisk *); -- cgit v1.2.3 From 9e016a719209d95338e314b46c3012cc7feaaeec Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sat, 2 Feb 2008 19:56:39 +0100 Subject: ide: add ide_deprecated_find_port() helper * Factor out code for finding ide_hwifs[] slot from ide_register_hw() to ide_deprecated_find_port(). * Convert bast-ide, ide-cs and delkin_cb host drivers to use ide_device_add() instead of ide_register_hw() (while at it drop doing "ide_unregister()" loop which tries to unregister _all_ IDE interfaces if useable ide_hwifs[] slot cannot be find). This patch leaves us with only two ide_register_hw() users: - drivers/macintosh/mediabay.c - drivers/ide/ide.c Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/arm/bast-ide.c | 20 +++++++++++++++++++- drivers/ide/ide.c | 41 +++++++++++++++++++++++++++++------------ drivers/ide/legacy/ide-cs.c | 25 ++++++++++++++++++++++++- drivers/ide/pci/delkin_cb.c | 33 +++++++++++++++++++++++++++------ include/linux/ide.h | 1 + 5 files changed, 100 insertions(+), 20 deletions(-) diff --git a/drivers/ide/arm/bast-ide.c b/drivers/ide/arm/bast-ide.c index 037300fa284..2864f5aca3f 100644 --- a/drivers/ide/arm/bast-ide.c +++ b/drivers/ide/arm/bast-ide.c @@ -28,8 +28,10 @@ static int __init bastide_register(unsigned int base, unsigned int aux, int irq, ide_hwif_t **hwif) { + ide_hwif_t *hwif; hw_regs_t hw; int i; + u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; memset(&hw, 0, sizeof(hw)); @@ -44,8 +46,24 @@ bastide_register(unsigned int base, unsigned int aux, int irq, hw.io_ports[IDE_CONTROL_OFFSET] = aux + (6 * 0x20); hw.irq = irq; - ide_register_hw(&hw, NULL, hwif); + hwif = ide_deprecated_find_port(hw.io_ports[IDE_DATA_OFFSET]); + if (hwif == NULL) + goto out; + i = hwif->index; + + if (hwif->present) + ide_unregister(i, 0, 1); + else if (!hwif->hold) + ide_init_port_data(hwif, i); + + ide_init_port_hw(hwif, &hw); + hwif->quirkproc = NULL; + + idx[0] = i; + + ide_device_add(idx, NULL); +out: return 0; } diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index 166acd513d5..d42216b52a7 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -683,6 +683,31 @@ void ide_init_port_hw(ide_hwif_t *hwif, hw_regs_t *hw) } EXPORT_SYMBOL_GPL(ide_init_port_hw); +ide_hwif_t *ide_deprecated_find_port(unsigned long base) +{ + ide_hwif_t *hwif; + int i; + + for (i = 0; i < MAX_HWIFS; i++) { + hwif = &ide_hwifs[i]; + if (hwif->io_ports[IDE_DATA_OFFSET] == base) + goto found; + } + + for (i = 0; i < MAX_HWIFS; i++) { + hwif = &ide_hwifs[i]; + if (hwif->hold) + continue; + if (!hwif->present && hwif->mate == NULL) + goto found; + } + + hwif = NULL; +found: + return hwif; +} +EXPORT_SYMBOL_GPL(ide_deprecated_find_port); + /** * ide_register_hw - register IDE interface * @hw: hardware registers @@ -702,18 +727,10 @@ int ide_register_hw(hw_regs_t *hw, void (*quirkproc)(ide_drive_t *), u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; do { - for (index = 0; index < MAX_HWIFS; ++index) { - hwif = &ide_hwifs[index]; - if (hwif->io_ports[IDE_DATA_OFFSET] == hw->io_ports[IDE_DATA_OFFSET]) - goto found; - } - for (index = 0; index < MAX_HWIFS; ++index) { - hwif = &ide_hwifs[index]; - if (hwif->hold) - continue; - if (!hwif->present && hwif->mate == NULL) - goto found; - } + hwif = ide_deprecated_find_port(hw->io_ports[IDE_DATA_OFFSET]); + index = hwif->index; + if (hwif) + goto found; for (index = 0; index < MAX_HWIFS; index++) ide_unregister(index, 1, 1); } while (retry--); diff --git a/drivers/ide/legacy/ide-cs.c b/drivers/ide/legacy/ide-cs.c index 2d772e2bebb..38e87ad211e 100644 --- a/drivers/ide/legacy/ide-cs.c +++ b/drivers/ide/legacy/ide-cs.c @@ -145,13 +145,36 @@ static void ide_detach(struct pcmcia_device *link) static int idecs_register(unsigned long io, unsigned long ctl, unsigned long irq, struct pcmcia_device *handle) { + ide_hwif_t *hwif; hw_regs_t hw; + int i; + u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; + memset(&hw, 0, sizeof(hw)); ide_init_hwif_ports(&hw, io, ctl, NULL); hw.irq = irq; hw.chipset = ide_pci; hw.dev = &handle->dev; - return ide_register_hw(&hw, &ide_undecoded_slave, NULL); + + hwif = ide_deprecated_find_port(hw.io_ports[IDE_DATA_OFFSET]); + if (hwif == NULL) + return -1; + + i = hwif->index; + + if (hwif->present) + ide_unregister(i, 0, 1); + else if (!hwif->hold) + ide_init_port_data(hwif, i); + + ide_init_port_hw(hwif, &hw); + hwif->quirkproc = &ide_undecoded_slave; + + idx[0] = i; + + ide_device_add(idx, NULL); + + return hwif->present ? i : -1; } /*====================================================================== diff --git a/drivers/ide/pci/delkin_cb.c b/drivers/ide/pci/delkin_cb.c index 4e9ebaa7962..15670801a67 100644 --- a/drivers/ide/pci/delkin_cb.c +++ b/drivers/ide/pci/delkin_cb.c @@ -51,6 +51,7 @@ delkin_cb_probe (struct pci_dev *dev, const struct pci_device_id *id) ide_hwif_t *hwif = NULL; ide_drive_t *drive; int i, rc; + u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; rc = pci_enable_device(dev); if (rc) { @@ -77,12 +78,27 @@ delkin_cb_probe (struct pci_dev *dev, const struct pci_device_id *id) hw.irq = dev->irq; hw.chipset = ide_pci; /* this enables IRQ sharing */ - rc = ide_register_hw(&hw, &ide_undecoded_slave, &hwif); - if (rc < 0) { - printk(KERN_ERR "delkin_cb: ide_register_hw failed (%d)\n", rc); - pci_disable_device(dev); - return -ENODEV; - } + hwif = ide_deprecated_find_port(hw.io_ports[IDE_DATA_OFFSET]); + if (hwif == NULL) + goto out_disable; + + i = hwif->index; + + if (hwif->present) + ide_unregister(i, 0, 1); + else if (!hwif->hold) + ide_init_port_data(hwif, i); + + ide_init_port_hw(hwif, &hw); + hwif->quirkproc = &ide_undecoded_slave; + + idx[0] = i; + + ide_device_add(idx, NULL); + + if (!hwif->present) + goto out_disable; + pci_set_drvdata(dev, hwif); hwif->dev = &dev->dev; drive = &hwif->drives[0]; @@ -91,6 +107,11 @@ delkin_cb_probe (struct pci_dev *dev, const struct pci_device_id *id) drive->unmask = 1; } return 0; + +out_disable: + printk(KERN_ERR "delkin_cb: no IDE devices found\n"); + pci_disable_device(dev); + return -ENODEV; } static void diff --git a/include/linux/ide.h b/include/linux/ide.h index 8ae0480af00..04422e5e6dd 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -196,6 +196,7 @@ typedef struct hw_regs_s { } hw_regs_t; struct hwif_s * ide_find_port(unsigned long); +struct hwif_s *ide_deprecated_find_port(unsigned long); void ide_init_port_data(struct hwif_s *, unsigned int); void ide_init_port_hw(struct hwif_s *, hw_regs_t *); -- cgit v1.2.3 From 909f4369bca30f9a186316a3bf2b4a9c1e702a25 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sat, 2 Feb 2008 19:56:39 +0100 Subject: ide: fix ide_unregister() usage in host drivers bast-ide.c/ide-cs.c/delkin_cb.c: * Don't set 'restore' flag for ide_unregister() when initializing new interface. rapide.c/ide-pnp.c/ide-cs.c/ide_platform.c/au1xxx-ide.c/delkin_cb.c/scc_pata.c: * Don't set 'init_default' and 'restore' flags for ide_unregister() when removing interface. Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/arm/bast-ide.c | 2 +- drivers/ide/arm/rapide.c | 2 +- drivers/ide/ide-pnp.c | 2 +- drivers/ide/legacy/ide-cs.c | 4 ++-- drivers/ide/legacy/ide_platform.c | 2 +- drivers/ide/mips/au1xxx-ide.c | 2 +- drivers/ide/pci/delkin_cb.c | 4 ++-- drivers/ide/pci/scc_pata.c | 2 +- 8 files changed, 10 insertions(+), 10 deletions(-) diff --git a/drivers/ide/arm/bast-ide.c b/drivers/ide/arm/bast-ide.c index 2864f5aca3f..0e7574c0ee6 100644 --- a/drivers/ide/arm/bast-ide.c +++ b/drivers/ide/arm/bast-ide.c @@ -53,7 +53,7 @@ bastide_register(unsigned int base, unsigned int aux, int irq, i = hwif->index; if (hwif->present) - ide_unregister(i, 0, 1); + ide_unregister(i, 0, 0); else if (!hwif->hold) ide_init_port_data(hwif, i); diff --git a/drivers/ide/arm/rapide.c b/drivers/ide/arm/rapide.c index 823d3331318..efba00d2fc3 100644 --- a/drivers/ide/arm/rapide.c +++ b/drivers/ide/arm/rapide.c @@ -76,7 +76,7 @@ static void __devexit rapide_remove(struct expansion_card *ec) ecard_set_drvdata(ec, NULL); - ide_unregister(hwif->index, 1, 1); + ide_unregister(hwif->index, 0, 0); ecard_release_resources(ec); } diff --git a/drivers/ide/ide-pnp.c b/drivers/ide/ide-pnp.c index a766bdbbad3..b163b2e5221 100644 --- a/drivers/ide/ide-pnp.c +++ b/drivers/ide/ide-pnp.c @@ -62,7 +62,7 @@ static void idepnp_remove(struct pnp_dev * dev) ide_hwif_t *hwif = pnp_get_drvdata(dev); if (hwif) - ide_unregister(hwif->index, 1, 1); + ide_unregister(hwif->index, 0, 0); else printk(KERN_ERR "idepnp: Unable to remove device, please report.\n"); } diff --git a/drivers/ide/legacy/ide-cs.c b/drivers/ide/legacy/ide-cs.c index 38e87ad211e..7c4aa6c79a9 100644 --- a/drivers/ide/legacy/ide-cs.c +++ b/drivers/ide/legacy/ide-cs.c @@ -163,7 +163,7 @@ static int idecs_register(unsigned long io, unsigned long ctl, unsigned long irq i = hwif->index; if (hwif->present) - ide_unregister(i, 0, 1); + ide_unregister(i, 0, 0); else if (!hwif->hold) ide_init_port_data(hwif, i); @@ -360,7 +360,7 @@ void ide_release(struct pcmcia_device *link) if (info->ndev) { /* FIXME: if this fails we need to queue the cleanup somehow -- need to investigate the required PCMCIA magic */ - ide_unregister(info->hd, 1, 1); + ide_unregister(info->hd, 0, 0); } info->ndev = 0; diff --git a/drivers/ide/legacy/ide_platform.c b/drivers/ide/legacy/ide_platform.c index c0dd67f4af3..26c82ce602d 100644 --- a/drivers/ide/legacy/ide_platform.c +++ b/drivers/ide/legacy/ide_platform.c @@ -122,7 +122,7 @@ static int __devexit plat_ide_remove(struct platform_device *pdev) { ide_hwif_t *hwif = pdev->dev.driver_data; - ide_unregister(hwif->index, 1, 1); + ide_unregister(hwif->index, 0, 0); return 0; } diff --git a/drivers/ide/mips/au1xxx-ide.c b/drivers/ide/mips/au1xxx-ide.c index 66a675a10f1..484a9287bf8 100644 --- a/drivers/ide/mips/au1xxx-ide.c +++ b/drivers/ide/mips/au1xxx-ide.c @@ -678,7 +678,7 @@ static int au_ide_remove(struct device *dev) ide_hwif_t *hwif = dev_get_drvdata(dev); _auide_hwif *ahwif = &auide_hwif; - ide_unregister(hwif->index, 1, 1); + ide_unregister(hwif->index, 0, 0); iounmap((void *)ahwif->regbase); diff --git a/drivers/ide/pci/delkin_cb.c b/drivers/ide/pci/delkin_cb.c index 15670801a67..3f9cd64c26a 100644 --- a/drivers/ide/pci/delkin_cb.c +++ b/drivers/ide/pci/delkin_cb.c @@ -85,7 +85,7 @@ delkin_cb_probe (struct pci_dev *dev, const struct pci_device_id *id) i = hwif->index; if (hwif->present) - ide_unregister(i, 0, 1); + ide_unregister(i, 0, 0); else if (!hwif->hold) ide_init_port_data(hwif, i); @@ -120,7 +120,7 @@ delkin_cb_remove (struct pci_dev *dev) ide_hwif_t *hwif = pci_get_drvdata(dev); if (hwif) - ide_unregister(hwif->index, 1, 1); + ide_unregister(hwif->index, 0, 0); pci_disable_device(dev); } diff --git a/drivers/ide/pci/scc_pata.c b/drivers/ide/pci/scc_pata.c index 7e52a55c86c..238e3e181e8 100644 --- a/drivers/ide/pci/scc_pata.c +++ b/drivers/ide/pci/scc_pata.c @@ -736,7 +736,7 @@ static void __devexit scc_remove(struct pci_dev *dev) hwif->dmatable_cpu = NULL; } - ide_unregister(hwif->index, 1, 1); + ide_unregister(hwif->index, 0, 0); hwif->chipset = ide_unknown; iounmap((void*)ports->dma); -- cgit v1.2.3 From 7704ca2a3ee4b3690c5dcc99ea4f8dcf10d7bbdb Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sat, 2 Feb 2008 19:56:39 +0100 Subject: ide: factor out code initializing devices from ide_init_port() * Factor out code initializing devices from ide_init_port() to ide_port_init_devices(). * Call the new function from ide_device_add_all(). There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-probe.c | 32 +++++++++++++++++--------------- 1 file changed, 17 insertions(+), 15 deletions(-) diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index c25df65b51f..802a04ad602 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -1289,6 +1289,22 @@ static void hwif_register_devices(ide_hwif_t *hwif) } } +static void ide_port_init_devices(ide_hwif_t *hwif) +{ + int i; + + for (i = 0; i < MAX_DRIVES; i++) { + ide_drive_t *drive = &hwif->drives[i]; + + if (hwif->host_flags & IDE_HFLAG_IO_32BIT) + drive->io_32bit = 1; + if (hwif->host_flags & IDE_HFLAG_UNMASK_IRQS) + drive->unmask = 1; + if ((hwif->host_flags & IDE_HFLAG_NO_AUTOTUNE) == 0) + drive->autotune = 1; + } +} + static void ide_init_port(ide_hwif_t *hwif, unsigned int port, const struct ide_port_info *d) { @@ -1314,16 +1330,6 @@ static void ide_init_port(ide_hwif_t *hwif, unsigned int port, if ((d->host_flags & IDE_HFLAG_SERIALIZE) && hwif->mate) hwif->mate->serialized = hwif->serialized = 1; - if (d->host_flags & IDE_HFLAG_IO_32BIT) { - hwif->drives[0].io_32bit = 1; - hwif->drives[1].io_32bit = 1; - } - - if (d->host_flags & IDE_HFLAG_UNMASK_IRQS) { - hwif->drives[0].unmask = 1; - hwif->drives[1].unmask = 1; - } - hwif->swdma_mask = d->swdma_mask; hwif->mwdma_mask = d->mwdma_mask; hwif->ultra_mask = d->udma_mask; @@ -1332,11 +1338,6 @@ static void ide_init_port(ide_hwif_t *hwif, unsigned int port, if ((d->host_flags && IDE_HFLAG_NO_DMA) == 0 && hwif->dma_base == 0) hwif->swdma_mask = hwif->mwdma_mask = hwif->ultra_mask = 0; - if ((d->host_flags & IDE_HFLAG_NO_AUTOTUNE) == 0) { - hwif->drives[0].autotune = 1; - hwif->drives[1].autotune = 1; - } - if (d->host_flags & IDE_HFLAG_RQSIZE_256) hwif->rqsize = 256; @@ -1371,6 +1372,7 @@ int ide_device_add_all(u8 *idx, const struct ide_port_info *d) mate = (i & 1) ? NULL : hwif; ide_init_port(hwif, i & 1, d); + ide_port_init_devices(hwif); } for (i = 0; i < MAX_HWIFS; i++) { -- cgit v1.2.3 From 807b90d0be23b8d088d4369b02539dada70f03f4 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sat, 2 Feb 2008 19:56:40 +0100 Subject: ide: add IDE_HFLAG_NO_{IO32_BIT,UNMASK_IRQS} host flags * Use the same bit for IDE_HFLAG_CS5520 and IDE_HFLAG_VDMA host flags (both are used only by cs5520 host driver currently). * Add IDE_HFLAG_NO_IO32_BIT host flag and use it instead of ->no_io_32bit ide_hwif_t field. * Add IDE_HFLAG_NO_UNMASK_IRQS host flag, then convert dtc2278 and rz1000 host drivers to use it. There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-probe.c | 4 +++- drivers/ide/legacy/dtc2278.c | 10 +++------- drivers/ide/mips/au1xxx-ide.c | 3 +-- drivers/ide/pci/rz1000.c | 3 +-- include/linux/ide.h | 13 ++++++++----- 5 files changed, 16 insertions(+), 17 deletions(-) diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 802a04ad602..fee898c4a77 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -822,7 +822,7 @@ static void ide_port_tune_devices(ide_hwif_t *hwif) for (unit = 0; unit < MAX_DRIVES; ++unit) { ide_drive_t *drive = &hwif->drives[unit]; - if (hwif->no_io_32bit) + if (hwif->host_flags & IDE_HFLAG_NO_IO_32BIT) drive->no_io_32bit = 1; else drive->no_io_32bit = drive->id->dword_io ? 1 : 0; @@ -1300,6 +1300,8 @@ static void ide_port_init_devices(ide_hwif_t *hwif) drive->io_32bit = 1; if (hwif->host_flags & IDE_HFLAG_UNMASK_IRQS) drive->unmask = 1; + if (hwif->host_flags & IDE_HFLAG_NO_UNMASK_IRQS) + drive->no_unmask = 1; if ((hwif->host_flags & IDE_HFLAG_NO_AUTOTUNE) == 0) drive->autotune = 1; } diff --git a/drivers/ide/legacy/dtc2278.c b/drivers/ide/legacy/dtc2278.c index 7cbf2f1f35f..73396f70f2b 100644 --- a/drivers/ide/legacy/dtc2278.c +++ b/drivers/ide/legacy/dtc2278.c @@ -89,7 +89,10 @@ static void dtc2278_set_pio_mode(ide_drive_t *drive, const u8 pio) static const struct ide_port_info dtc2278_port_info __initdata = { .chipset = ide_dtc2278, .host_flags = IDE_HFLAG_SERIALIZE | + IDE_HFLAG_NO_UNMASK_IRQS | IDE_HFLAG_IO_32BIT | + /* disallow ->io_32bit changes */ + IDE_HFLAG_NO_IO_32BIT | IDE_HFLAG_NO_DMA | IDE_HFLAG_NO_AUTOTUNE, .pio_mask = ATA_PIO4, @@ -125,14 +128,7 @@ static int __init dtc2278_probe(void) #endif local_irq_restore(flags); - hwif->no_io_32bit = 1; /* disallow ->io_32bit changes */ hwif->set_pio_mode = &dtc2278_set_pio_mode; - hwif->drives[0].no_unmask = 1; - hwif->drives[1].no_unmask = 1; - - mate->no_io_32bit = 1; - mate->drives[0].no_unmask = 1; - mate->drives[1].no_unmask = 1; ide_device_add(idx, &dtc2278_port_info); diff --git a/drivers/ide/mips/au1xxx-ide.c b/drivers/ide/mips/au1xxx-ide.c index 484a9287bf8..0f4bf5d7283 100644 --- a/drivers/ide/mips/au1xxx-ide.c +++ b/drivers/ide/mips/au1xxx-ide.c @@ -551,6 +551,7 @@ static void auide_setup_ports(hw_regs_t *hw, _auide_hwif *ahwif) static const struct ide_port_info au1xxx_port_info = { .host_flags = IDE_HFLAG_POST_SET_MODE | IDE_HFLAG_NO_DMA | /* no SFF-style DMA */ + IDE_HFLAG_NO_IO_32BIT | IDE_HFLAG_UNMASK_IRQS, .pio_mask = ATA_PIO4, #ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA @@ -649,8 +650,6 @@ static int au_ide_probe(struct device *dev) hwif->select_data = 0; /* no chipset-specific code */ hwif->config_data = 0; /* no chipset-specific code */ - hwif->no_io_32bit = 1; - auide_hwif.hwif = hwif; hwif->hwif_data = &auide_hwif; diff --git a/drivers/ide/pci/rz1000.c b/drivers/ide/pci/rz1000.c index dd0d18ba002..51676612f78 100644 --- a/drivers/ide/pci/rz1000.c +++ b/drivers/ide/pci/rz1000.c @@ -33,8 +33,7 @@ static void __devinit init_hwif_rz1000 (ide_hwif_t *hwif) } else { if (hwif->mate) hwif->mate->serialized = hwif->serialized = 1; - hwif->drives[0].no_unmask = 1; - hwif->drives[1].no_unmask = 1; + hwif->host_flags |= IDE_HFLAG_NO_UNMASK_IRQS; printk(KERN_INFO "%s: serialized, disabled unmasking " "(buggy RZ1000/RZ1001)\n", hwif->name); } diff --git a/include/linux/ide.h b/include/linux/ide.h index 04422e5e6dd..7b24358a6f8 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -607,7 +607,6 @@ typedef struct hwif_s { unsigned reset : 1; /* reset after probe */ unsigned auto_poll : 1; /* supports nop auto-poll */ unsigned sg_mapped : 1; /* sg_table and sg_nents are ready */ - unsigned no_io_32bit : 1; /* 1 = can not do 32-bit IO ops */ unsigned mmio : 1; /* host uses MMIO */ struct device gendev; @@ -1065,7 +1064,7 @@ enum { IDE_HFLAG_NO_SET_MODE = (1 << 9), /* trust BIOS for programming chipset/device for DMA */ IDE_HFLAG_TRUST_BIOS_FOR_DMA = (1 << 10), - /* host uses VDMA */ + /* host uses VDMA (tied with IDE_HFLAG_CS5520 for now) */ IDE_HFLAG_VDMA = (1 << 11), /* ATAPI DMA is unsupported */ IDE_HFLAG_NO_ATAPI_DMA = (1 << 12), @@ -1075,8 +1074,10 @@ enum { IDE_HFLAG_NO_DMA = (1 << 14), /* check if host is PCI IDE device before allowing DMA */ IDE_HFLAG_NO_AUTODMA = (1 << 15), + /* don't autotune PIO */ + IDE_HFLAG_NO_AUTOTUNE = (1 << 16), /* host is CS5510/CS5520 */ - IDE_HFLAG_CS5520 = (1 << 16), + IDE_HFLAG_CS5520 = IDE_HFLAG_VDMA, /* no LBA48 */ IDE_HFLAG_NO_LBA48 = (1 << 17), /* no LBA48 DMA */ @@ -1102,8 +1103,10 @@ enum { IDE_HFLAG_CLEAR_SIMPLEX = (1 << 28), /* DSC overlap is unsupported */ IDE_HFLAG_NO_DSC = (1 << 29), - /* don't autotune PIO */ - IDE_HFLAG_NO_AUTOTUNE = (1 << 30), + /* never use 32-bit I/O ops */ + IDE_HFLAG_NO_IO_32BIT = (1 << 30), + /* never unmask IRQs */ + IDE_HFLAG_NO_UNMASK_IRQS = (1 << 31), }; #ifdef CONFIG_BLK_DEV_OFFBOARD -- cgit v1.2.3 From 1f2cf8b0014fdfa3141449b508aca25e78c078a7 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sat, 2 Feb 2008 19:56:40 +0100 Subject: ide: add ->port_init_devs method to ide_hwif_t * Add ->port_init_devs method to ide_hwif_t for a host specific initialization of devices on a port. Call the new method from ide_port_init_devices(). * Convert ht6560b, qd65xx and opti621 host drivers to use the new ->port_init_devs method. There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-probe.c | 3 +++ drivers/ide/legacy/ht6560b.c | 26 ++++++++++++++------------ drivers/ide/legacy/qd65xx.c | 44 +++++++++++++++++++++++++++++++++----------- drivers/ide/pci/opti621.c | 10 +++++++--- include/linux/ide.h | 2 ++ 5 files changed, 59 insertions(+), 26 deletions(-) diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index fee898c4a77..174c81d8793 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -1305,6 +1305,9 @@ static void ide_port_init_devices(ide_hwif_t *hwif) if ((hwif->host_flags & IDE_HFLAG_NO_AUTOTUNE) == 0) drive->autotune = 1; } + + if (hwif->port_init_devs) + hwif->port_init_devs(hwif); } static void ide_init_port(ide_hwif_t *hwif, unsigned int port, diff --git a/drivers/ide/legacy/ht6560b.c b/drivers/ide/legacy/ht6560b.c index a89cd80d812..02d12c74764 100644 --- a/drivers/ide/legacy/ht6560b.c +++ b/drivers/ide/legacy/ht6560b.c @@ -300,6 +300,18 @@ static void ht6560b_set_pio_mode(ide_drive_t *drive, const u8 pio) #endif } +static void __init ht6560b_port_init_devs(ide_hwif_t *hwif) +{ + /* Setting default configurations for drives. */ + int t = (HT_CONFIG_DEFAULT << 8) | HT_TIMING_DEFAULT; + + if (hwif->channel) + t |= (HT_SECONDARY_IF << 8); + + hwif->drives[0].drive_data = t; + hwif->drives[1].drive_data = t; +} + int probe_ht6560b = 0; module_param_named(probe, probe_ht6560b, bool, 0); @@ -318,7 +330,6 @@ static int __init ht6560b_init(void) { ide_hwif_t *hwif, *mate; static u8 idx[4] = { 0, 1, 0xff, 0xff }; - int t; if (probe_ht6560b == 0) return -ENODEV; @@ -343,17 +354,8 @@ static int __init ht6560b_init(void) mate->selectproc = &ht6560b_selectproc; mate->set_pio_mode = &ht6560b_set_pio_mode; - /* - * Setting default configurations for drives - */ - t = (HT_CONFIG_DEFAULT << 8); - t |= HT_TIMING_DEFAULT; - hwif->drives[0].drive_data = t; - hwif->drives[1].drive_data = t; - - t |= (HT_SECONDARY_IF << 8); - mate->drives[0].drive_data = t; - mate->drives[1].drive_data = t; + hwif->port_init_devs = ht6560b_port_init_devs; + mate->port_init_devs = ht6560b_port_init_devs; ide_device_add(idx, &ht6560b_port_info); diff --git a/drivers/ide/legacy/qd65xx.c b/drivers/ide/legacy/qd65xx.c index 60a6ed1088d..bba29df5f21 100644 --- a/drivers/ide/legacy/qd65xx.c +++ b/drivers/ide/legacy/qd65xx.c @@ -305,13 +305,33 @@ static int __init qd_testreg(int port) * called to setup an ata channel : adjusts attributes & links for tuning */ -static void __init qd_setup(ide_hwif_t *hwif, int base, int config, - unsigned int data0, unsigned int data1) +static void __init qd_setup(ide_hwif_t *hwif, int base, int config) { hwif->select_data = base; hwif->config_data = config; - hwif->drives[0].drive_data = data0; - hwif->drives[1].drive_data = data1; +} + +static void __init qd6500_port_init_devs(ide_hwif_t *hwif) +{ + u8 base = hwif->select_data, config = QD_CONFIG(hwif); + + hwif->drives[0].drive_data = QD6500_DEF_DATA; + hwif->drives[1].drive_data = QD6500_DEF_DATA; +} + +static void __init qd6580_port_init_devs(ide_hwif_t *hwif) +{ + u16 t1, t2; + u8 base = hwif->select_data, config = QD_CONFIG(hwif); + + if (QD_CONTROL(hwif) & QD_CONTR_SEC_DISABLED) { + t1 = QD6580_DEF_DATA; + t2 = QD6580_DEF_DATA2; + } else + t2 = t1 = hwif->channel ? QD6580_DEF_DATA2 : QD6580_DEF_DATA; + + hwif->drives[0].drive_data = t1; + hwif->drives[1].drive_data = t2; } /* @@ -396,8 +416,9 @@ static int __init qd_probe(int base) return 1; } - qd_setup(hwif, base, config, QD6500_DEF_DATA, QD6500_DEF_DATA); + qd_setup(hwif, base, config); + hwif->port_init_devs = qd6500_port_init_devs; hwif->set_pio_mode = &qd6500_set_pio_mode; idx[unit] = unit; @@ -429,9 +450,10 @@ static int __init qd_probe(int base) hwif = &ide_hwifs[unit]; printk(KERN_INFO "%s: qd6580: single IDE board\n", hwif->name); - qd_setup(hwif, base, config | (control << 8), - QD6580_DEF_DATA, QD6580_DEF_DATA2); + qd_setup(hwif, base, config | (control << 8)); + + hwif->port_init_devs = qd6580_port_init_devs; hwif->set_pio_mode = &qd6580_set_pio_mode; idx[unit] = unit; @@ -450,14 +472,14 @@ static int __init qd_probe(int base) printk(KERN_INFO "%s&%s: qd6580: dual IDE board\n", hwif->name, mate->name); - qd_setup(hwif, base, config | (control << 8), - QD6580_DEF_DATA, QD6580_DEF_DATA); + qd_setup(hwif, base, config | (control << 8)); + hwif->port_init_devs = qd6580_port_init_devs; hwif->set_pio_mode = &qd6580_set_pio_mode; - qd_setup(mate, base, config | (control << 8), - QD6580_DEF_DATA2, QD6580_DEF_DATA2); + qd_setup(mate, base, config | (control << 8)); + mate->port_init_devs = qd6580_port_init_devs; mate->set_pio_mode = &qd6580_set_pio_mode; idx[0] = 0; diff --git a/drivers/ide/pci/opti621.c b/drivers/ide/pci/opti621.c index 1e532c9a97f..46e8748f507 100644 --- a/drivers/ide/pci/opti621.c +++ b/drivers/ide/pci/opti621.c @@ -315,14 +315,18 @@ static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio) spin_unlock_irqrestore(&opti621_lock, flags); } +static void __devinit opti621_port_init_devs(ide_hwif_t *hwif) +{ + hwif->drives[0].drive_data = PIO_DONT_KNOW; + hwif->drives[1].drive_data = PIO_DONT_KNOW; +} + /* * init_hwif_opti621() is called once for each hwif found at boot. */ static void __devinit init_hwif_opti621 (ide_hwif_t *hwif) { - hwif->drives[0].drive_data = PIO_DONT_KNOW; - hwif->drives[1].drive_data = PIO_DONT_KNOW; - + hwif->port_init_devs = opti621_port_init_devs; hwif->set_pio_mode = &opti621_set_pio_mode; } diff --git a/include/linux/ide.h b/include/linux/ide.h index 7b24358a6f8..9f195078ff9 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -514,6 +514,8 @@ typedef struct hwif_s { #if 0 ide_hwif_ops_t *hwifops; #else + /* host specific initialization of devices on a port */ + void (*port_init_devs)(struct hwif_s *); /* routine to program host for PIO mode */ void (*set_pio_mode)(ide_drive_t *, const u8); /* routine to program host for DMA mode */ -- cgit v1.2.3 From 521fd1e8d1d9ee7121e5c792ad4b955043fb5ffd Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sat, 2 Feb 2008 19:56:40 +0100 Subject: ide: remove incorrect init_gendisk() comment Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-probe.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 174c81d8793..f4baedf7d02 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -1182,12 +1182,6 @@ static void drive_release_dev (struct device *dev) complete(&drive->gendev_rel_comp); } -/* - * init_gendisk() (as opposed to ide_geninit) is called for each major device, - * after probing for drives, to allocate partition tables and other data - * structures needed for the routines in genhd.c. ide_geninit() gets called - * somewhat later, during the partition check. - */ static void init_gendisk (ide_hwif_t *hwif) { unsigned int unit; -- cgit v1.2.3 From 5c2854e62ce1dfb2cd86968f0d7b0d45e07c14db Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sat, 2 Feb 2008 19:56:40 +0100 Subject: ide: skip not present devices in init_gendisk() No need to initialize drive->gendev and waste memory on IDE settings for not present devices. Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-probe.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index f4baedf7d02..4d5291c33fa 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -1188,6 +1188,10 @@ static void init_gendisk (ide_hwif_t *hwif) for (unit = 0; unit < MAX_DRIVES; ++unit) { ide_drive_t * drive = &hwif->drives[unit]; + + if (!drive->present) + continue; + ide_add_generic_settings(drive); snprintf(drive->gendev.bus_id,BUS_ID_SIZE,"%u.%u", hwif->index,unit); -- cgit v1.2.3 From 3a4e7c96d6bce25b102115c267c8ebfe13187925 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sat, 2 Feb 2008 19:56:40 +0100 Subject: ide: move blk_register_region() call out from init_gendisk() Move blk_register_region() call out from init_gendisk() to hwif_init(). There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-probe.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 4d5291c33fa..74b024519af 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -1200,8 +1200,6 @@ static void init_gendisk (ide_hwif_t *hwif) drive->gendev.driver_data = drive; drive->gendev.release = drive_release_dev; } - blk_register_region(MKDEV(hwif->major, 0), MAX_DRIVES << PARTN_BITS, - THIS_MODULE, ata_probe, ata_lock, hwif); } static int hwif_init(ide_hwif_t *hwif) @@ -1261,6 +1259,8 @@ static int hwif_init(ide_hwif_t *hwif) done: init_gendisk(hwif); + blk_register_region(MKDEV(hwif->major, 0), MAX_DRIVES << PARTN_BITS, + THIS_MODULE, ata_probe, ata_lock, hwif); ide_acpi_init(hwif); return 1; -- cgit v1.2.3 From 346d49969b1ba2c95bec56d319fe4a455c00b174 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sat, 2 Feb 2008 19:56:40 +0100 Subject: ide: call init_gendisk() after ide_acpi_init() There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-probe.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 74b024519af..5ccd691b0bd 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -1258,10 +1258,10 @@ static int hwif_init(ide_hwif_t *hwif) hwif->name, hwif->irq); done: - init_gendisk(hwif); blk_register_region(MKDEV(hwif->major, 0), MAX_DRIVES << PARTN_BITS, THIS_MODULE, ata_probe, ata_lock, hwif); ide_acpi_init(hwif); + init_gendisk(hwif); return 1; out: -- cgit v1.2.3 From c5d70cc73ac3fd796a900da4c109d20b038b8037 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sat, 2 Feb 2008 19:56:41 +0100 Subject: ide: merge init_gendisk() into hwif_register_devices() There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-probe.c | 44 ++++++++++++++++---------------------------- 1 file changed, 16 insertions(+), 28 deletions(-) diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 5ccd691b0bd..2cccfe9d39f 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -1182,26 +1182,6 @@ static void drive_release_dev (struct device *dev) complete(&drive->gendev_rel_comp); } -static void init_gendisk (ide_hwif_t *hwif) -{ - unsigned int unit; - - for (unit = 0; unit < MAX_DRIVES; ++unit) { - ide_drive_t * drive = &hwif->drives[unit]; - - if (!drive->present) - continue; - - ide_add_generic_settings(drive); - snprintf(drive->gendev.bus_id,BUS_ID_SIZE,"%u.%u", - hwif->index,unit); - drive->gendev.parent = &hwif->gendev; - drive->gendev.bus = &ide_bus_type; - drive->gendev.driver_data = drive; - drive->gendev.release = drive_release_dev; - } -} - static int hwif_init(ide_hwif_t *hwif) { int old_irq; @@ -1261,7 +1241,6 @@ done: blk_register_region(MKDEV(hwif->major, 0), MAX_DRIVES << PARTN_BITS, THIS_MODULE, ata_probe, ata_lock, hwif); ide_acpi_init(hwif); - init_gendisk(hwif); return 1; out: @@ -1275,15 +1254,24 @@ static void hwif_register_devices(ide_hwif_t *hwif) for (i = 0; i < MAX_DRIVES; i++) { ide_drive_t *drive = &hwif->drives[i]; + struct device *dev = &drive->gendev; + int ret; - if (drive->present) { - int ret = device_register(&drive->gendev); + if (!drive->present) + continue; - if (ret < 0) - printk(KERN_WARNING "IDE: %s: " - "device_register error: %d\n", - __FUNCTION__, ret); - } + ide_add_generic_settings(drive); + + snprintf(dev->bus_id, BUS_ID_SIZE, "%u.%u", hwif->index, i); + dev->parent = &hwif->gendev; + dev->bus = &ide_bus_type; + dev->driver_data = drive; + dev->release = drive_release_dev; + + ret = device_register(dev); + if (ret < 0) + printk(KERN_WARNING "IDE: %s: device_register error: " + "%d\n", __func__, ret); } } -- cgit v1.2.3 From 8a0e7e14a28b1084e90f8828d35530019c645969 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sat, 2 Feb 2008 19:56:41 +0100 Subject: ide: move hwif->rqsize init from ide_init_queue() to init_irq() Move hwif->rqsize init from ide_init_queue() to init_irq(). There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-probe.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 2cccfe9d39f..e7067c20e33 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -881,13 +881,6 @@ static int ide_init_queue(ide_drive_t *drive) q->queuedata = drive; blk_queue_segment_boundary(q, 0xffff); - if (!hwif->rqsize) { - if ((hwif->host_flags & IDE_HFLAG_NO_LBA48) || - (hwif->host_flags & IDE_HFLAG_NO_LBA48_DMA)) - hwif->rqsize = 256; - else - hwif->rqsize = 65536; - } if (hwif->rqsize < max_sectors) max_sectors = hwif->rqsize; blk_queue_max_sectors(q, max_sectors); @@ -1019,6 +1012,14 @@ static int init_irq (ide_hwif_t *hwif) goto out_unlink; } + if (!hwif->rqsize) { + if ((hwif->host_flags & IDE_HFLAG_NO_LBA48) || + (hwif->host_flags & IDE_HFLAG_NO_LBA48_DMA)) + hwif->rqsize = 256; + else + hwif->rqsize = 65536; + } + /* * For any present drive: * - allocate the block device queue -- cgit v1.2.3 From 0947e0dcd62c15c67dba71561624d87b2d0cf131 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sat, 2 Feb 2008 19:56:41 +0100 Subject: ide: factor out adding drive to hwgroup from init_irq() Factor out adding drive to hwgroup from init_irq() to ide_add_drive_to_hwgroup(). There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-probe.c | 29 ++++++++++++++++++----------- 1 file changed, 18 insertions(+), 11 deletions(-) diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index e7067c20e33..4d940d1a80e 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -911,6 +911,23 @@ static int ide_init_queue(ide_drive_t *drive) return 0; } +static void ide_add_drive_to_hwgroup(ide_drive_t *drive) +{ + ide_hwgroup_t *hwgroup = drive->hwif->hwgroup; + + spin_lock_irq(&ide_lock); + if (!hwgroup->drive) { + /* first drive for hwgroup. */ + drive->next = drive; + hwgroup->drive = drive; + hwgroup->hwif = HWIF(hwgroup->drive); + } else { + drive->next = hwgroup->drive->next; + hwgroup->drive->next = drive; + } + spin_unlock_irq(&ide_lock); +} + /* * This routine sets up the irq for an ide interface, and creates a new * hwgroup for the irq/hwif if none was previously assigned. @@ -1033,17 +1050,7 @@ static int init_irq (ide_hwif_t *hwif) printk(KERN_ERR "ide: failed to init %s\n",drive->name); continue; } - spin_lock_irq(&ide_lock); - if (!hwgroup->drive) { - /* first drive for hwgroup. */ - drive->next = drive; - hwgroup->drive = drive; - hwgroup->hwif = HWIF(hwgroup->drive); - } else { - drive->next = hwgroup->drive->next; - hwgroup->drive->next = drive; - } - spin_unlock_irq(&ide_lock); + ide_add_drive_to_hwgroup(drive); } #if !defined(__mc68000__) && !defined(CONFIG_APUS) -- cgit v1.2.3 From d5bc6592df85dbbb300e0d62af89645602c97551 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sat, 2 Feb 2008 19:56:41 +0100 Subject: ide: factor out devices setup from init_irq() * Factor out devices setup from init_irq() to ide_port_setup_devices(). While at it: * Do devices setup after printing port information. Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-probe.c | 44 ++++++++++++++++++++++++++++---------------- 1 file changed, 28 insertions(+), 16 deletions(-) diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 4d940d1a80e..91c352c8272 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -928,6 +928,31 @@ static void ide_add_drive_to_hwgroup(ide_drive_t *drive) spin_unlock_irq(&ide_lock); } +/* + * For any present drive: + * - allocate the block device queue + * - link drive into the hwgroup + */ +static void ide_port_setup_devices(ide_hwif_t *hwif) +{ + int i; + + for (i = 0; i < MAX_DRIVES; i++) { + ide_drive_t *drive = &hwif->drives[i]; + + if (!drive->present) + continue; + + if (ide_init_queue(drive)) { + printk(KERN_ERR "ide: failed to init %s\n", + drive->name); + continue; + } + + ide_add_drive_to_hwgroup(drive); + } +} + /* * This routine sets up the irq for an ide interface, and creates a new * hwgroup for the irq/hwif if none was previously assigned. @@ -1037,22 +1062,6 @@ static int init_irq (ide_hwif_t *hwif) hwif->rqsize = 65536; } - /* - * For any present drive: - * - allocate the block device queue - * - link drive into the hwgroup - */ - for (index = 0; index < MAX_DRIVES; ++index) { - ide_drive_t *drive = &hwif->drives[index]; - if (!drive->present) - continue; - if (ide_init_queue(drive)) { - printk(KERN_ERR "ide: failed to init %s\n",drive->name); - continue; - } - ide_add_drive_to_hwgroup(drive); - } - #if !defined(__mc68000__) && !defined(CONFIG_APUS) printk("%s at 0x%03lx-0x%03lx,0x%03lx on irq %d", hwif->name, hwif->io_ports[IDE_DATA_OFFSET], @@ -1066,6 +1075,9 @@ static int init_irq (ide_hwif_t *hwif) printk(" (%sed with %s)", hwif->sharing_irq ? "shar" : "serializ", match->name); printk("\n"); + + ide_port_setup_devices(hwif); + mutex_unlock(&ide_cfg_mtx); return 0; out_unlink: -- cgit v1.2.3 From decdc3f0d664c87761fa1c90733a840b3ca4eccb Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sat, 2 Feb 2008 19:56:41 +0100 Subject: ide: move ide_acpi_init() call to ide_device_add_all() There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-probe.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 91c352c8272..cab06ac9522 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -1260,7 +1260,6 @@ static int hwif_init(ide_hwif_t *hwif) done: blk_register_region(MKDEV(hwif->major, 0), MAX_DRIVES << PARTN_BITS, THIS_MODULE, ata_probe, ata_lock, hwif); - ide_acpi_init(hwif); return 1; out: @@ -1429,6 +1428,8 @@ int ide_device_add_all(u8 *idx, const struct ide_port_info *d) rc = -1; continue; } + + ide_acpi_init(hwif); } for (i = 0; i < MAX_HWIFS; i++) { -- cgit v1.2.3 From 4484d80388b4a70250f590c5a3631c91f088fe18 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sat, 2 Feb 2008 19:56:42 +0100 Subject: ide-acpi: remove needless exports Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-acpi.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/ide/ide-acpi.c b/drivers/ide/ide-acpi.c index 68bc6184478..6dfe1036e6f 100644 --- a/drivers/ide/ide-acpi.c +++ b/drivers/ide/ide-acpi.c @@ -494,7 +494,6 @@ int ide_acpi_exec_tfs(ide_drive_t *drive) return ret; } -EXPORT_SYMBOL_GPL(ide_acpi_exec_tfs); /** * ide_acpi_get_timing - get the channel (controller) timings @@ -580,7 +579,6 @@ void ide_acpi_get_timing(ide_hwif_t *hwif) kfree(output.pointer); } -EXPORT_SYMBOL_GPL(ide_acpi_get_timing); /** * ide_acpi_push_timing - set the channel (controller) timings @@ -634,7 +632,6 @@ void ide_acpi_push_timing(ide_hwif_t *hwif) } DEBPRINT("_STM status: %d\n", status); } -EXPORT_SYMBOL_GPL(ide_acpi_push_timing); /** * ide_acpi_set_state - set the channel power state @@ -762,4 +759,3 @@ void ide_acpi_init(ide_hwif_t *hwif) } } } -EXPORT_SYMBOL_GPL(ide_acpi_init); -- cgit v1.2.3 From 070ecb841c4f15817f4e2365785173eea56ab3e6 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sat, 2 Feb 2008 19:56:43 +0100 Subject: ide-acpi: remove dead code from do_drive_get_GTF() These pointers are always setup in ide_acpi_init(). Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-acpi.c | 10 ---------- 1 file changed, 10 deletions(-) diff --git a/drivers/ide/ide-acpi.c b/drivers/ide/ide-acpi.c index 6dfe1036e6f..ac12d30f210 100644 --- a/drivers/ide/ide-acpi.c +++ b/drivers/ide/ide-acpi.c @@ -280,16 +280,6 @@ static int do_drive_get_GTF(ide_drive_t *drive, port = hwif->channel ? drive->dn - 2: drive->dn; - if (!drive->acpidata) { - if (port == 0) { - drive->acpidata = &hwif->acpidata->master; - hwif->acpidata->master.drive = drive; - } else { - drive->acpidata = &hwif->acpidata->slave; - hwif->acpidata->slave.drive = drive; - } - } - DEBPRINT("ENTER: %s at %s, port#: %d, hard_port#: %d\n", hwif->name, dev->bus_id, port, hwif->channel); -- cgit v1.2.3 From eafd88a3b5d86ba2dd515d430b57a01349d0867b Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sat, 2 Feb 2008 19:56:43 +0100 Subject: ide: factor out devices setup from ide_acpi_init() * Factor out devices setup from ide_acpi_init() to ide_acpi_port_init_devices(). * Call ide_acpi_port_init_devices() in ide_device_add_all(). While at it: * Remove no longer needed 'drive' field from struct ide_acpi_drive_link. There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-acpi.c | 49 ++++++++++++++++++++----------------------------- drivers/ide/ide-probe.c | 1 + include/linux/ide.h | 2 ++ 3 files changed, 23 insertions(+), 29 deletions(-) diff --git a/drivers/ide/ide-acpi.c b/drivers/ide/ide-acpi.c index ac12d30f210..25aaeae1e83 100644 --- a/drivers/ide/ide-acpi.c +++ b/drivers/ide/ide-acpi.c @@ -39,7 +39,6 @@ struct GTM_buffer { }; struct ide_acpi_drive_link { - ide_drive_t *drive; acpi_handle obj_handle; u8 idbuff[512]; }; @@ -675,11 +674,6 @@ void ide_acpi_set_state(ide_hwif_t *hwif, int on) */ void ide_acpi_init(ide_hwif_t *hwif) { - int unit; - int err; - struct ide_acpi_drive_link *master; - struct ide_acpi_drive_link *slave; - ide_acpi_blacklist(); hwif->acpidata = kzalloc(sizeof(struct ide_acpi_hwif_link), GFP_KERNEL); @@ -691,40 +685,38 @@ void ide_acpi_init(ide_hwif_t *hwif) DEBPRINT("no ACPI object for %s found\n", hwif->name); kfree(hwif->acpidata); hwif->acpidata = NULL; - return; } +} + +void ide_acpi_port_init_devices(ide_hwif_t *hwif) +{ + ide_drive_t *drive; + int i, err; + + if (hwif->acpidata == NULL) + return; /* * The ACPI spec mandates that we send information * for both drives, regardless whether they are connected * or not. */ - hwif->acpidata->master.drive = &hwif->drives[0]; hwif->drives[0].acpidata = &hwif->acpidata->master; - master = &hwif->acpidata->master; - - hwif->acpidata->slave.drive = &hwif->drives[1]; hwif->drives[1].acpidata = &hwif->acpidata->slave; - slave = &hwif->acpidata->slave; - /* * Send IDENTIFY for each drive */ - if (master->drive->present) { - err = taskfile_lib_get_identify(master->drive, master->idbuff); - if (err) { - DEBPRINT("identify device %s failed (%d)\n", - master->drive->name, err); - } - } + for (i = 0; i < MAX_DRIVES; i++) { + drive = &hwif->drives[i]; + + if (!drive->present) + continue; - if (slave->drive->present) { - err = taskfile_lib_get_identify(slave->drive, slave->idbuff); - if (err) { + err = taskfile_lib_get_identify(drive, drive->acpidata->idbuff); + if (err) DEBPRINT("identify device %s failed (%d)\n", - slave->drive->name, err); - } + drive->name, err); } if (ide_noacpionboot) { @@ -740,12 +732,11 @@ void ide_acpi_init(ide_hwif_t *hwif) ide_acpi_get_timing(hwif); ide_acpi_push_timing(hwif); - for (unit = 0; unit < MAX_DRIVES; ++unit) { - ide_drive_t *drive = &hwif->drives[unit]; + for (i = 0; i < MAX_DRIVES; i++) { + drive = &hwif->drives[i]; - if (drive->present) { + if (drive->present) /* Execute ACPI startup code */ ide_acpi_exec_tfs(drive); - } } } diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index cab06ac9522..abb695aa021 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -1430,6 +1430,7 @@ int ide_device_add_all(u8 *idx, const struct ide_port_info *d) } ide_acpi_init(hwif); + ide_acpi_port_init_devices(hwif); } for (i = 0; i < MAX_HWIFS; i++) { diff --git a/include/linux/ide.h b/include/linux/ide.h index 9f195078ff9..e33e307d941 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -1202,12 +1202,14 @@ extern int ide_acpi_exec_tfs(ide_drive_t *drive); extern void ide_acpi_get_timing(ide_hwif_t *hwif); extern void ide_acpi_push_timing(ide_hwif_t *hwif); extern void ide_acpi_init(ide_hwif_t *hwif); +void ide_acpi_port_init_devices(ide_hwif_t *); extern void ide_acpi_set_state(ide_hwif_t *hwif, int on); #else static inline int ide_acpi_exec_tfs(ide_drive_t *drive) { return 0; } static inline void ide_acpi_get_timing(ide_hwif_t *hwif) { ; } static inline void ide_acpi_push_timing(ide_hwif_t *hwif) { ; } static inline void ide_acpi_init(ide_hwif_t *hwif) { ; } +static inline void ide_acpi_port_init_devices(ide_hwif_t *hwif) { ; } static inline void ide_acpi_set_state(ide_hwif_t *hwif, int on) {} #endif -- cgit v1.2.3 From 327617e1da15c3f04bfc50018b0319bd40849022 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sat, 2 Feb 2008 19:56:43 +0100 Subject: ide: move hwif->present check out from ide_proc_register_port() Move hwif->present check out from ide_proc_register_port() to ide_device_add_all(). There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-probe.c | 9 +++++++-- drivers/ide/ide-proc.c | 3 --- 2 files changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index abb695aa021..1ef29375704 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -1448,8 +1448,13 @@ int ide_device_add_all(u8 *idx, const struct ide_port_info *d) } for (i = 0; i < MAX_HWIFS; i++) { - if (idx[i] != 0xff) - ide_proc_register_port(&ide_hwifs[idx[i]]); + if (idx[i] == 0xff) + continue; + + hwif = &ide_hwifs[idx[i]]; + + if (hwif->present) + ide_proc_register_port(hwif); } return rc; diff --git a/drivers/ide/ide-proc.c b/drivers/ide/ide-proc.c index 00c249cba23..c6ed84b84e8 100644 --- a/drivers/ide/ide-proc.c +++ b/drivers/ide/ide-proc.c @@ -793,9 +793,6 @@ static ide_proc_entry_t hwif_entries[] = { void ide_proc_register_port(ide_hwif_t *hwif) { - if (!hwif->present) - return; - if (!hwif->proc) { hwif->proc = proc_mkdir(hwif->name, proc_ide_root); -- cgit v1.2.3 From d9270a3f1d5b6f9de58250e8ecdba4c48c54c20b Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sat, 2 Feb 2008 19:56:43 +0100 Subject: ide: move create_proc_ide_drives() call to ide_device_add_all() * Un-static create_proc_ide_drives() and call it from ide_device_add_all(). While at it: * Rename create_proc_ide_drives() to ide_proc_port_register_devices(). Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-probe.c | 4 +++- drivers/ide/ide-proc.c | 4 +--- include/linux/ide.h | 2 ++ 3 files changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 1ef29375704..c8d533a1015 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -1453,8 +1453,10 @@ int ide_device_add_all(u8 *idx, const struct ide_port_info *d) hwif = &ide_hwifs[idx[i]]; - if (hwif->present) + if (hwif->present) { ide_proc_register_port(hwif); + ide_proc_port_register_devices(hwif); + } } return rc; diff --git a/drivers/ide/ide-proc.c b/drivers/ide/ide-proc.c index c6ed84b84e8..975c0ff0f43 100644 --- a/drivers/ide/ide-proc.c +++ b/drivers/ide/ide-proc.c @@ -739,7 +739,7 @@ void ide_proc_unregister_driver(ide_drive_t *drive, ide_driver_t *driver) EXPORT_SYMBOL(ide_proc_unregister_driver); -static void create_proc_ide_drives(ide_hwif_t *hwif) +void ide_proc_port_register_devices(ide_hwif_t *hwif) { int d; struct proc_dir_entry *ent; @@ -801,8 +801,6 @@ void ide_proc_register_port(ide_hwif_t *hwif) ide_add_proc_entries(hwif->proc, hwif_entries, hwif); } - - create_proc_ide_drives(hwif); } #ifdef CONFIG_BLK_DEV_IDEPCI diff --git a/include/linux/ide.h b/include/linux/ide.h index e33e307d941..70209148ef5 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -715,6 +715,7 @@ typedef struct { void proc_ide_create(void); void proc_ide_destroy(void); void ide_proc_register_port(ide_hwif_t *); +void ide_proc_port_register_devices(ide_hwif_t *); void ide_proc_unregister_port(ide_hwif_t *); void ide_proc_register_driver(ide_drive_t *, ide_driver_t *); void ide_proc_unregister_driver(ide_drive_t *, ide_driver_t *); @@ -747,6 +748,7 @@ void ide_pci_create_host_proc(const char *, get_info_t *); static inline void proc_ide_create(void) { ; } static inline void proc_ide_destroy(void) { ; } static inline void ide_proc_register_port(ide_hwif_t *hwif) { ; } +static inline void ide_proc_port_register_devices(ide_hwif_t *hwif) { ; } static inline void ide_proc_unregister_port(ide_hwif_t *hwif) { ; } static inline void ide_proc_register_driver(ide_drive_t *drive, ide_driver_t *driver) { ; } static inline void ide_proc_unregister_driver(ide_drive_t *drive, ide_driver_t *driver) { ; } -- cgit v1.2.3 From c1c9dbc849c2d9d7cddd58a1de4f3bdd632c161f Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sat, 2 Feb 2008 19:56:44 +0100 Subject: ide-tape: use ide_execute_command() Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-tape.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 5aef63acf1e..eff118ba217 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -2181,8 +2181,8 @@ static ide_startstop_t idetape_issue_packet_command (ide_drive_t *drive, idetape if (dma_ok) /* Will begin DMA later */ set_bit(PC_DMA_IN_PROGRESS, &pc->flags); if (test_bit(IDETAPE_DRQ_INTERRUPT, &tape->flags)) { - ide_set_handler(drive, &idetape_transfer_pc, IDETAPE_WAIT_CMD, NULL); - hwif->OUTB(WIN_PACKETCMD, IDE_COMMAND_REG); + ide_execute_command(drive, WIN_PACKETCMD, &idetape_transfer_pc, + IDETAPE_WAIT_CMD, NULL); return ide_started; } else { hwif->OUTB(WIN_PACKETCMD, IDE_COMMAND_REG); -- cgit v1.2.3 From 2d6027f0877518c2ca8f3492e57ed5b182904a0c Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sat, 2 Feb 2008 19:56:44 +0100 Subject: ide-scsi: use ide_execute_command() Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/scsi/ide-scsi.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c index 5ed00069846..7901272d9b3 100644 --- a/drivers/scsi/ide-scsi.c +++ b/drivers/scsi/ide-scsi.c @@ -596,11 +596,8 @@ static ide_startstop_t idescsi_issue_pc (ide_drive_t *drive, idescsi_pc_t *pc) set_bit(PC_DMA_OK, &pc->flags); if (test_bit(IDESCSI_DRQ_INTERRUPT, &scsi->flags)) { - BUG_ON(HWGROUP(drive)->handler != NULL); - ide_set_handler(drive, &idescsi_transfer_pc, - get_timeout(pc), idescsi_expiry); - /* Issue the packet command */ - HWIF(drive)->OUTB(WIN_PACKETCMD, IDE_COMMAND_REG); + ide_execute_command(drive, WIN_PACKETCMD, &idescsi_transfer_pc, + get_timeout(pc), idescsi_expiry); return ide_started; } else { /* Issue the packet command */ -- cgit v1.2.3 From c78d717210619c4312f791fb1da4dc1985630785 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sat, 2 Feb 2008 19:56:44 +0100 Subject: trm290: use ide_execute_command() Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/pci/trm290.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/drivers/ide/pci/trm290.c b/drivers/ide/pci/trm290.c index e3d58c9f05e..de750f7a43e 100644 --- a/drivers/ide/pci/trm290.c +++ b/drivers/ide/pci/trm290.c @@ -177,10 +177,7 @@ static void trm290_selectproc (ide_drive_t *drive) static void trm290_dma_exec_cmd(ide_drive_t *drive, u8 command) { - BUG_ON(HWGROUP(drive)->handler != NULL); /* paranoia check */ - ide_set_handler(drive, &ide_dma_intr, WAIT_CMD, NULL); - /* issue cmd to drive */ - outb(command, IDE_COMMAND_REG); + ide_execute_command(drive, command, &ide_dma_intr, WAIT_CMD, NULL); } static int trm290_dma_setup(ide_drive_t *drive) -- cgit v1.2.3 From b187dfeed3be2fc879e904ed0b01d490d8866760 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sat, 2 Feb 2008 19:56:44 +0100 Subject: ide-cris: use ide_execute_command() Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/cris/ide-cris.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/drivers/ide/cris/ide-cris.c b/drivers/ide/cris/ide-cris.c index ac645263fd0..00587a8c2ba 100644 --- a/drivers/ide/cris/ide-cris.c +++ b/drivers/ide/cris/ide-cris.c @@ -1034,11 +1034,7 @@ static int cris_dma_setup(ide_drive_t *drive) static void cris_dma_exec_cmd(ide_drive_t *drive, u8 command) { - /* set the irq handler which will finish the request when DMA is done */ - ide_set_handler(drive, &cris_dma_intr, WAIT_CMD, NULL); - - /* issue cmd to drive */ - cris_ide_outb(command, IDE_COMMAND_REG); + ide_execute_command(drive, command, &cris_dma_intr, WAIT_CMD, NULL); } static void cris_dma_start(ide_drive_t *drive) -- cgit v1.2.3 From 57b552757314cf3f2253f07629f49016be6fa6c3 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sat, 2 Feb 2008 19:56:45 +0100 Subject: ide-probe: remove needless Status register reads * Cache value read from the Status register in 'stat' variable in do_probe() and enable_nest(), then remove remove needless Status register reads. While at it: * Add proper KERN_* levels to printk() calls. Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-probe.c | 35 +++++++++++++++++++++-------------- 1 file changed, 21 insertions(+), 14 deletions(-) diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index c8d533a1015..9c07bdb68d1 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -423,8 +423,9 @@ static int ide_busy_sleep(ide_hwif_t *hwif) static int do_probe (ide_drive_t *drive, u8 cmd) { - int rc; ide_hwif_t *hwif = HWIF(drive); + int rc; + u8 stat; if (drive->present) { /* avoid waiting for inappropriate probes */ @@ -461,15 +462,17 @@ static int do_probe (ide_drive_t *drive, u8 cmd) /* failed: try again */ rc = try_to_identify(drive,cmd); } - if (hwif->INB(IDE_STATUS_REG) == (BUSY_STAT|READY_STAT)) + + stat = hwif->INB(IDE_STATUS_REG); + + if (stat == (BUSY_STAT | READY_STAT)) return 4; if ((rc == 1 && cmd == WIN_PIDENTIFY) && ((drive->autotune == IDE_TUNE_DEFAULT) || (drive->autotune == IDE_TUNE_AUTO))) { - printk("%s: no response (status = 0x%02x), " - "resetting drive\n", drive->name, - hwif->INB(IDE_STATUS_REG)); + printk(KERN_ERR "%s: no response (status = 0x%02x), " + "resetting drive\n", drive->name, stat); msleep(50); hwif->OUTB(drive->select.all, IDE_SELECT_REG); msleep(50); @@ -477,11 +480,13 @@ static int do_probe (ide_drive_t *drive, u8 cmd) (void)ide_busy_sleep(hwif); rc = try_to_identify(drive, cmd); } + + /* ensure drive IRQ is clear */ + stat = hwif->INB(IDE_STATUS_REG); + if (rc == 1) - printk("%s: no response (status = 0x%02x)\n", - drive->name, hwif->INB(IDE_STATUS_REG)); - /* ensure drive irq is clear */ - (void) hwif->INB(IDE_STATUS_REG); + printk(KERN_ERR "%s: no response (status = 0x%02x)\n", + drive->name, stat); } else { /* not present or maybe ATAPI */ rc = 3; @@ -502,6 +507,7 @@ static int do_probe (ide_drive_t *drive, u8 cmd) static void enable_nest (ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); + u8 stat; printk("%s: enabling %s -- ", hwif->name, drive->id->model); SELECT_DRIVE(drive); @@ -515,11 +521,12 @@ static void enable_nest (ide_drive_t *drive) msleep(50); - if (!OK_STAT((hwif->INB(IDE_STATUS_REG)), 0, BAD_STAT)) { - printk("failed (status = 0x%02x)\n", hwif->INB(IDE_STATUS_REG)); - } else { - printk("success\n"); - } + stat = hwif->INB(IDE_STATUS_REG); + + if (!OK_STAT(stat, 0, BAD_STAT)) + printk(KERN_CONT "failed (status = 0x%02x)\n", stat); + else + printk(KERN_CONT "success\n"); /* if !(success||timed-out) */ if (do_probe(drive, WIN_IDENTIFY) >= 2) { -- cgit v1.2.3 From b60acab1e74734fc60ee5efd281ecff93f8e993b Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sat, 2 Feb 2008 19:56:45 +0100 Subject: ide: remove unused ->auto_poll field from ide_hwif_t Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- include/linux/ide.h | 1 - 1 file changed, 1 deletion(-) diff --git a/include/linux/ide.h b/include/linux/ide.h index 70209148ef5..7f53c6c6df7 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -607,7 +607,6 @@ typedef struct hwif_s { unsigned serialized : 1; /* serialized all channel operation */ unsigned sharing_irq: 1; /* 1 = sharing irq with another hwif */ unsigned reset : 1; /* reset after probe */ - unsigned auto_poll : 1; /* supports nop auto-poll */ unsigned sg_mapped : 1; /* sg_table and sg_nents are ready */ unsigned mmio : 1; /* host uses MMIO */ -- cgit v1.2.3 From b034304a28d15f019ca914e954c3de20df28065e Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sat, 2 Feb 2008 19:56:45 +0100 Subject: ide: convert ->straight8 field in ide_hwif_t to bit flag Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- include/linux/ide.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/ide.h b/include/linux/ide.h index 7f53c6c6df7..3b31da89200 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -488,7 +488,6 @@ typedef struct hwif_s { u8 major; /* our major number */ u8 index; /* 0 for ide0; 1 for ide1; ... */ u8 channel; /* for dual-port chips: 0=primary, 1=secondary */ - u8 straight8; /* Alan's straight 8 check */ u8 bus_state; /* power state of the IDE bus */ u32 host_flags; @@ -609,6 +608,7 @@ typedef struct hwif_s { unsigned reset : 1; /* reset after probe */ unsigned sg_mapped : 1; /* sg_table and sg_nents are ready */ unsigned mmio : 1; /* host uses MMIO */ + unsigned straight8 : 1; /* Alan's straight 8 check */ struct device gendev; struct completion gendev_rel_comp; /* To deal with device release() */ -- cgit v1.2.3 From 92b83c8f3219c36d61a6600ceb422e65c409be59 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sat, 2 Feb 2008 19:56:45 +0100 Subject: ide: remove ->nice0 and ->nice2 fields from ide_drive_t * ->nice0 and ->nice2 ide_drive_t fields are always zero so remove them. * IDE_NICE_0 and IDE_NICE_2 defines from are no longer used by any kernel code so cover them with #ifndef/#endif __KERNEL__. Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide.c | 5 +---- include/linux/hdreg.h | 4 +++- include/linux/ide.h | 2 -- 3 files changed, 4 insertions(+), 7 deletions(-) diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index d42216b52a7..ac613600161 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -1035,11 +1035,8 @@ int generic_ide_ioctl(ide_drive_t *drive, struct file *file, struct block_device case HDIO_GET_NICE: return put_user(drive->dsc_overlap << IDE_NICE_DSC_OVERLAP | drive->atapi_overlap << IDE_NICE_ATAPI_OVERLAP | - drive->nice0 << IDE_NICE_0 | - drive->nice1 << IDE_NICE_1 | - drive->nice2 << IDE_NICE_2, + drive->nice1 << IDE_NICE_1, (long __user *) arg); - #ifdef CONFIG_IDE_TASK_IOCTL case HDIO_DRIVE_TASKFILE: if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO)) diff --git a/include/linux/hdreg.h b/include/linux/hdreg.h index ff43f8d6b5b..3882013d29e 100644 --- a/include/linux/hdreg.h +++ b/include/linux/hdreg.h @@ -706,8 +706,10 @@ struct hd_driveid { */ #define IDE_NICE_DSC_OVERLAP (0) /* per the DSC overlap protocol */ #define IDE_NICE_ATAPI_OVERLAP (1) /* not supported yet */ -#define IDE_NICE_0 (2) /* when sure that it won't affect us */ #define IDE_NICE_1 (3) /* when probably won't affect us much */ +#ifndef __KERNEL__ +#define IDE_NICE_0 (2) /* when sure that it won't affect us */ #define IDE_NICE_2 (4) /* when we know it's on our expense */ +#endif #endif /* _LINUX_HDREG_H */ diff --git a/include/linux/ide.h b/include/linux/ide.h index 3b31da89200..4871437a52b 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -407,8 +407,6 @@ typedef struct ide_drive_s { unsigned no_unmask : 1; /* disallow setting unmask bit */ unsigned no_io_32bit : 1; /* disallow enabling 32bit I/O */ unsigned atapi_overlap : 1; /* ATAPI overlap (not supported) */ - unsigned nice0 : 1; /* give obvious excess bandwidth */ - unsigned nice2 : 1; /* give a share in our own bandwidth */ unsigned doorlocking : 1; /* for removable only: door lock/unlock works */ unsigned nodma : 1; /* disallow DMA */ unsigned autotune : 2; /* 0=default, 1=autotune, 2=noautotune */ -- cgit v1.2.3 From 835457def90c86fe84d7729c0531fd551fb14eda Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sat, 2 Feb 2008 19:56:45 +0100 Subject: ide: remove SATA_*_REG macros * siimage.c: use hwif->sata_scr[SATA_{ERROR,STATUS}_OFFSET] instead of SATA_{ERROR,STATUS}_REG macros. * Remove no longer needed SATA_*_REG macros. While at it: * Remove needless SATA Status register read from sil_sata_reset_poll(). Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/pci/siimage.c | 25 ++++++++++++++++--------- include/linux/ide.h | 6 ------ 2 files changed, 16 insertions(+), 15 deletions(-) diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c index 5c1bd7928c2..ef5b39fa042 100644 --- a/drivers/ide/pci/siimage.c +++ b/drivers/ide/pci/siimage.c @@ -331,15 +331,18 @@ static int siimage_mmio_ide_dma_test_irq (ide_drive_t *drive) { ide_hwif_t *hwif = HWIF(drive); unsigned long addr = siimage_selreg(hwif, 0x1); + void __iomem *sata_error_addr + = (void __iomem *)hwif->sata_scr[SATA_ERROR_OFFSET]; - if (SATA_ERROR_REG) { + if (sata_error_addr) { unsigned long base = (unsigned long)hwif->hwif_data; - u32 ext_stat = readl((void __iomem *)(base + 0x10)); u8 watchdog = 0; + if (ext_stat & ((hwif->channel) ? 0x40 : 0x10)) { - u32 sata_error = readl((void __iomem *)SATA_ERROR_REG); - writel(sata_error, (void __iomem *)SATA_ERROR_REG); + u32 sata_error = readl(sata_error_addr); + + writel(sata_error, sata_error_addr); watchdog = (sata_error & 0x00680000) ? 1 : 0; printk(KERN_WARNING "%s: sata_error = 0x%08x, " "watchdog = %d, %s\n", @@ -418,13 +421,17 @@ static int sil_sata_busproc(ide_drive_t * drive, int state) static int sil_sata_reset_poll(ide_drive_t *drive) { - if (SATA_STATUS_REG) { - ide_hwif_t *hwif = HWIF(drive); + ide_hwif_t *hwif = drive->hwif; + void __iomem *sata_status_addr + = (void __iomem *)hwif->sata_scr[SATA_STATUS_OFFSET]; + + if (sata_status_addr) { + /* SATA Status is available only when in MMIO mode */ + u32 sata_stat = readl(sata_status_addr); - /* SATA_STATUS_REG is valid only when in MMIO mode */ - if ((readl((void __iomem *)SATA_STATUS_REG) & 0x03) != 0x03) { + if ((sata_stat & 0x03) != 0x03) { printk(KERN_WARNING "%s: reset phy dead, status=0x%08x\n", - hwif->name, readl((void __iomem *)SATA_STATUS_REG)); + hwif->name, sata_stat); HWGROUP(drive)->polling = 0; return ide_started; } diff --git a/include/linux/ide.h b/include/linux/ide.h index 4871437a52b..e2048d2ca64 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -112,18 +112,12 @@ typedef unsigned char byte; /* used everywhere */ #define SATA_NR_PORTS (3) /* 16 possible ?? */ #define SATA_STATUS_OFFSET (0) -#define SATA_STATUS_REG (HWIF(drive)->sata_scr[SATA_STATUS_OFFSET]) #define SATA_ERROR_OFFSET (1) -#define SATA_ERROR_REG (HWIF(drive)->sata_scr[SATA_ERROR_OFFSET]) #define SATA_CONTROL_OFFSET (2) -#define SATA_CONTROL_REG (HWIF(drive)->sata_scr[SATA_CONTROL_OFFSET]) #define SATA_MISC_OFFSET (0) -#define SATA_MISC_REG (HWIF(drive)->sata_misc[SATA_MISC_OFFSET]) #define SATA_PHY_OFFSET (1) -#define SATA_PHY_REG (HWIF(drive)->sata_misc[SATA_PHY_OFFSET]) #define SATA_IEN_OFFSET (2) -#define SATA_IEN_REG (HWIF(drive)->sata_misc[SATA_IEN_OFFSET]) /* * Our Physical Region Descriptor (PRD) table should be large enough -- cgit v1.2.3 From 629f944bb18c9deccce89ad833f1211c0036a632 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sat, 2 Feb 2008 19:56:46 +0100 Subject: ide: use __ide_set_handler() in ide_execute_command() * Use __ide_set_handler() in ide_execute_command(). While at it: * Fix whitespace damage in ide_execute_command(). Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-iops.c | 21 ++++++++------------- 1 file changed, 8 insertions(+), 13 deletions(-) diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index 16b1f6e1278..44689f5cc95 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -882,22 +882,17 @@ void ide_execute_command(ide_drive_t *drive, u8 cmd, ide_handler_t *handler, unsigned long flags; ide_hwgroup_t *hwgroup = HWGROUP(drive); ide_hwif_t *hwif = HWIF(drive); - + spin_lock_irqsave(&ide_lock, flags); - BUG_ON(hwgroup->handler); - hwgroup->handler = handler; - hwgroup->expiry = expiry; - hwgroup->timer.expires = jiffies + timeout; - hwgroup->req_gen_timer = hwgroup->req_gen; - add_timer(&hwgroup->timer); + __ide_set_handler(drive, handler, timeout, expiry); hwif->OUTBSYNC(drive, cmd, IDE_COMMAND_REG); - /* Drive takes 400nS to respond, we must avoid the IRQ being - serviced before that. - - FIXME: we could skip this delay with care on non shared - devices - */ + /* + * Drive takes 400nS to respond, we must avoid the IRQ being + * serviced before that. + * + * FIXME: we could skip this delay with care on non shared devices + */ ndelay(400); spin_unlock_irqrestore(&ide_lock, flags); } -- cgit v1.2.3 From 98d2a7aad1cbeb6e75e054bfb09d172b9a175df5 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sat, 2 Feb 2008 19:56:46 +0100 Subject: ide-scsi: remove needless SELECT_DRIVE() call SELECT_DRIVE() is called by IDE core code in start_request() before device driver's ->do_request method. In ide-scsi case ->do_request is implemented by idescsi_do_request() which is also the only user of idescsi_issue_pc(). Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/scsi/ide-scsi.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c index 7901272d9b3..6c4f0f08178 100644 --- a/drivers/scsi/ide-scsi.c +++ b/drivers/scsi/ide-scsi.c @@ -588,8 +588,6 @@ static ide_startstop_t idescsi_issue_pc (ide_drive_t *drive, idescsi_pc_t *pc) hwif->sg_mapped = 0; } - SELECT_DRIVE(drive); - ide_pktcmd_tf_load(drive, IDE_TFLAG_NO_SELECT_MASK, bcount, dma); if (dma) -- cgit v1.2.3 From fa017176f7144028aa23c1adcebb1792c891320c Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sat, 2 Feb 2008 19:56:46 +0100 Subject: ide: unexport SELECT_DRIVE() Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-iops.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index 44689f5cc95..09069da2274 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -163,8 +163,6 @@ void SELECT_DRIVE (ide_drive_t *drive) HWIF(drive)->OUTB(drive->select.all, IDE_SELECT_REG); } -EXPORT_SYMBOL(SELECT_DRIVE); - void SELECT_MASK (ide_drive_t *drive, int mask) { if (HWIF(drive)->maskproc) -- cgit v1.2.3 From 5efe7c540ec6021905d443dfe23cc44a11345edd Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sat, 2 Feb 2008 19:56:46 +0100 Subject: ide: remove set_transfer() Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-iops.c | 18 ------------------ drivers/ide/ide-taskfile.c | 6 +++++- include/linux/ide.h | 1 - 3 files changed, 5 insertions(+), 20 deletions(-) diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index 09069da2274..99fe50e941b 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -627,24 +627,6 @@ int ide_ata66_check (ide_drive_t *drive, ide_task_t *args) return 0; } -/* - * Backside of HDIO_DRIVE_CMD call of SETFEATURES_XFER. - * 1 : Safe to update drive->id DMA registers. - * 0 : OOPs not allowed. - */ -int set_transfer (ide_drive_t *drive, ide_task_t *args) -{ - if (args->tf.command == WIN_SETFEATURES && - args->tf.nsect >= XFER_SW_DMA_0 && - args->tf.feature == SETFEATURES_XFER && - (drive->id->dma_ultra || - drive->id->dma_mword || - drive->id->dma_1word)) - return 1; - - return 0; -} - #ifdef CONFIG_BLK_DEV_IDEDMA static u8 ide_auto_reduce_xfer (ide_drive_t *drive) { diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c index 16a9a581d08..bf72b6d9f68 100644 --- a/drivers/ide/ide-taskfile.c +++ b/drivers/ide/ide-taskfile.c @@ -755,6 +755,7 @@ int ide_cmd_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg) u8 args[4], xfer_rate = 0; ide_task_t tfargs; struct ide_taskfile *tf = &tfargs.tf; + struct hd_driveid *id = drive->id; if (NULL == (void *) arg) { struct request rq; @@ -792,7 +793,10 @@ int ide_cmd_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg) return -ENOMEM; } - if (set_transfer(drive, &tfargs)) { + if (tf->command == WIN_SETFEATURES && + tf->feature == SETFEATURES_XFER && + tf->nsect >= XFER_SW_DMA_0 && + (id->dma_ultra || id->dma_mword || id->dma_1word)) { xfer_rate = args[1]; if (ide_ata66_check(drive, &tfargs)) goto abort; diff --git a/include/linux/ide.h b/include/linux/ide.h index e2048d2ca64..b41eb7d12cd 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -991,7 +991,6 @@ extern int ide_driveid_update(ide_drive_t *); extern int ide_ata66_check(ide_drive_t *, ide_task_t *); extern int ide_config_drive_speed(ide_drive_t *, u8); extern u8 eighty_ninty_three (ide_drive_t *); -extern int set_transfer(ide_drive_t *, ide_task_t *); extern int taskfile_lib_get_identify(ide_drive_t *drive, u8 *); extern int ide_wait_not_busy(ide_hwif_t *hwif, unsigned long timeout); -- cgit v1.2.3 From af10f77390f6c7c5cf6f53e6b3cdaa38562b03af Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sat, 2 Feb 2008 19:56:46 +0100 Subject: ide: remove ide_ata66_check() Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-iops.c | 15 --------------- drivers/ide/ide-taskfile.c | 5 ++++- include/linux/ide.h | 1 - 3 files changed, 4 insertions(+), 17 deletions(-) diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index 99fe50e941b..e00fbbb423b 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -612,21 +612,6 @@ no_80w: return 0; } -int ide_ata66_check (ide_drive_t *drive, ide_task_t *args) -{ - if (args->tf.command == WIN_SETFEATURES && - args->tf.nsect > XFER_UDMA_2 && - args->tf.feature == SETFEATURES_XFER) { - if (eighty_ninty_three(drive) == 0) { - printk(KERN_WARNING "%s: UDMA speeds >UDMA33 cannot " - "be set\n", drive->name); - return 1; - } - } - - return 0; -} - #ifdef CONFIG_BLK_DEV_IDEDMA static u8 ide_auto_reduce_xfer (ide_drive_t *drive) { diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c index bf72b6d9f68..4e1da1c78cb 100644 --- a/drivers/ide/ide-taskfile.c +++ b/drivers/ide/ide-taskfile.c @@ -798,8 +798,11 @@ int ide_cmd_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg) tf->nsect >= XFER_SW_DMA_0 && (id->dma_ultra || id->dma_mword || id->dma_1word)) { xfer_rate = args[1]; - if (ide_ata66_check(drive, &tfargs)) + if (tf->nsect > XFER_UDMA_2 && !eighty_ninty_three(drive)) { + printk(KERN_WARNING "%s: UDMA speeds >UDMA33 cannot " + "be set\n", drive->name); goto abort; + } } err = ide_raw_taskfile(drive, &tfargs, buf, args[3]); diff --git a/include/linux/ide.h b/include/linux/ide.h index b41eb7d12cd..748af8dc089 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -988,7 +988,6 @@ int ide_task_ioctl(ide_drive_t *, unsigned int, unsigned long); extern int system_bus_clock(void); extern int ide_driveid_update(ide_drive_t *); -extern int ide_ata66_check(ide_drive_t *, ide_task_t *); extern int ide_config_drive_speed(ide_drive_t *, u8); extern u8 eighty_ninty_three (ide_drive_t *); extern int taskfile_lib_get_identify(ide_drive_t *drive, u8 *); -- cgit v1.2.3 From 99ffbe0e9713c89798c90bde7a462645e098b76b Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sat, 2 Feb 2008 19:56:47 +0100 Subject: ide: move drive->crc_count check out from check_dma_crc() Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-iops.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index e00fbbb423b..955bac2166a 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -968,13 +968,10 @@ static ide_startstop_t reset_pollfunc (ide_drive_t *drive) static void check_dma_crc(ide_drive_t *drive) { #ifdef CONFIG_BLK_DEV_IDEDMA - if (drive->crc_count) { - ide_dma_off_quietly(drive); - ide_set_xfer_rate(drive, ide_auto_reduce_xfer(drive)); - if (drive->current_speed >= XFER_SW_DMA_0) - ide_dma_on(drive); - } else - ide_dma_off(drive); + ide_dma_off_quietly(drive); + ide_set_xfer_rate(drive, ide_auto_reduce_xfer(drive)); + if (drive->current_speed >= XFER_SW_DMA_0) + ide_dma_on(drive); #endif } @@ -999,17 +996,20 @@ static void pre_reset(ide_drive_t *drive) else drive->post_reset = 1; - if (!drive->keep_settings) { - if (drive->using_dma) { + if (drive->using_dma) { + if (drive->crc_count) check_dma_crc(drive); - } else { + else + ide_dma_off(drive); + } + + if (!drive->keep_settings) { + if (!drive->using_dma) { drive->unmask = 0; drive->io_32bit = 0; } return; } - if (drive->using_dma) - check_dma_crc(drive); if (HWIF(drive)->pre_reset != NULL) HWIF(drive)->pre_reset(drive); -- cgit v1.2.3 From 296921a4ca01612cb1d9a43343b33a33eb7697ff Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sat, 2 Feb 2008 19:56:47 +0100 Subject: ide: remove ide_auto_reduce_xfer() While at it: * Remove needless '!drive->crc_count' check. Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-iops.c | 41 +++++++++++++---------------------------- 1 file changed, 13 insertions(+), 28 deletions(-) diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index 955bac2166a..b7da44c9e91 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -612,33 +612,6 @@ no_80w: return 0; } -#ifdef CONFIG_BLK_DEV_IDEDMA -static u8 ide_auto_reduce_xfer (ide_drive_t *drive) -{ - if (!drive->crc_count) - return drive->current_speed; - drive->crc_count = 0; - - switch(drive->current_speed) { - case XFER_UDMA_7: return XFER_UDMA_6; - case XFER_UDMA_6: return XFER_UDMA_5; - case XFER_UDMA_5: return XFER_UDMA_4; - case XFER_UDMA_4: return XFER_UDMA_3; - case XFER_UDMA_3: return XFER_UDMA_2; - case XFER_UDMA_2: return XFER_UDMA_1; - case XFER_UDMA_1: return XFER_UDMA_0; - /* - * OOPS we do not goto non Ultra DMA modes - * without iCRC's available we force - * the system to PIO and make the user - * invoke the ATA-1 ATA-2 DMA modes. - */ - case XFER_UDMA_0: - default: return XFER_PIO_4; - } -} -#endif /* CONFIG_BLK_DEV_IDEDMA */ - int ide_driveid_update(ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; @@ -968,8 +941,20 @@ static ide_startstop_t reset_pollfunc (ide_drive_t *drive) static void check_dma_crc(ide_drive_t *drive) { #ifdef CONFIG_BLK_DEV_IDEDMA + u8 mode; + ide_dma_off_quietly(drive); - ide_set_xfer_rate(drive, ide_auto_reduce_xfer(drive)); + drive->crc_count = 0; + mode = drive->current_speed; + /* + * Don't try non Ultra-DMA modes without iCRC's. Force the + * device to PIO and make the user enable SWDMA/MWDMA modes. + */ + if (mode > XFER_UDMA_0 && mode <= XFER_UDMA_7) + mode--; + else + mode = XFER_PIO_4; + ide_set_xfer_rate(drive, mode); if (drive->current_speed >= XFER_SW_DMA_0) ide_dma_on(drive); #endif -- cgit v1.2.3 From 578cfa0d72f81526b2fcb1dd2463c47bbf633989 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sat, 2 Feb 2008 19:56:47 +0100 Subject: ide: move check_dma_crc() to ide-dma.c * Move check_dma_crc() to ide-dma.c and add inline version for CONFIG_BLK_DEV_IDEDMA=n case. * Rename check_dma_crc() to ide_check_dma_crc(). Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-dma.c | 20 ++++++++++++++++++++ drivers/ide/ide-iops.c | 24 +----------------------- include/linux/ide.h | 2 ++ 3 files changed, 23 insertions(+), 23 deletions(-) diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c index 7beaf1e9be1..3cf59f2c392 100644 --- a/drivers/ide/ide-dma.c +++ b/drivers/ide/ide-dma.c @@ -819,6 +819,26 @@ int ide_set_dma(ide_drive_t *drive) return 0; } +void ide_check_dma_crc(ide_drive_t *drive) +{ + u8 mode; + + ide_dma_off_quietly(drive); + drive->crc_count = 0; + mode = drive->current_speed; + /* + * Don't try non Ultra-DMA modes without iCRC's. Force the + * device to PIO and make the user enable SWDMA/MWDMA modes. + */ + if (mode > XFER_UDMA_0 && mode <= XFER_UDMA_7) + mode--; + else + mode = XFER_PIO_4; + ide_set_xfer_rate(drive, mode); + if (drive->current_speed >= XFER_SW_DMA_0) + ide_dma_on(drive); +} + #ifdef CONFIG_BLK_DEV_IDEDMA_PCI void ide_dma_lost_irq (ide_drive_t *drive) { diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index b7da44c9e91..a95178f5e1b 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -938,28 +938,6 @@ static ide_startstop_t reset_pollfunc (ide_drive_t *drive) return ide_stopped; } -static void check_dma_crc(ide_drive_t *drive) -{ -#ifdef CONFIG_BLK_DEV_IDEDMA - u8 mode; - - ide_dma_off_quietly(drive); - drive->crc_count = 0; - mode = drive->current_speed; - /* - * Don't try non Ultra-DMA modes without iCRC's. Force the - * device to PIO and make the user enable SWDMA/MWDMA modes. - */ - if (mode > XFER_UDMA_0 && mode <= XFER_UDMA_7) - mode--; - else - mode = XFER_PIO_4; - ide_set_xfer_rate(drive, mode); - if (drive->current_speed >= XFER_SW_DMA_0) - ide_dma_on(drive); -#endif -} - static void ide_disk_pre_reset(ide_drive_t *drive) { int legacy = (drive->id->cfs_enable_2 & 0x0400) ? 0 : 1; @@ -983,7 +961,7 @@ static void pre_reset(ide_drive_t *drive) if (drive->using_dma) { if (drive->crc_count) - check_dma_crc(drive); + ide_check_dma_crc(drive); else ide_dma_off(drive); } diff --git a/include/linux/ide.h b/include/linux/ide.h index 748af8dc089..367c17084a2 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -1155,6 +1155,7 @@ void ide_dma_off_quietly(ide_drive_t *); void ide_dma_off(ide_drive_t *); void ide_dma_on(ide_drive_t *); int ide_set_dma(ide_drive_t *); +void ide_check_dma_crc(ide_drive_t *); ide_startstop_t ide_dma_intr(ide_drive_t *); int ide_build_sglist(ide_drive_t *, struct request *); @@ -1182,6 +1183,7 @@ static inline void ide_dma_off(ide_drive_t *drive) { ; } static inline void ide_dma_on(ide_drive_t *drive) { ; } static inline void ide_dma_verbose(ide_drive_t *drive) { ; } static inline int ide_set_dma(ide_drive_t *drive) { return 1; } +static inline void ide_check_dma_crc(ide_drive_t *drive) { ; } #endif /* CONFIG_BLK_DEV_IDEDMA */ #ifndef CONFIG_BLK_DEV_IDEDMA_PCI -- cgit v1.2.3 From dcb425f557eb01e73614f2292f0a92ce02e40e2a Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sat, 2 Feb 2008 19:56:47 +0100 Subject: ide-cs: use ide_std_init_ports() No reason to use ide_init_hwif_ports() in ide-cs (as a nice side-effect this makes ide-cs work on archs that don't define IDE_ARCH_OBSOLETE_INIT). Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/legacy/ide-cs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ide/legacy/ide-cs.c b/drivers/ide/legacy/ide-cs.c index 7c4aa6c79a9..15ccf6944ae 100644 --- a/drivers/ide/legacy/ide-cs.c +++ b/drivers/ide/legacy/ide-cs.c @@ -151,7 +151,7 @@ static int idecs_register(unsigned long io, unsigned long ctl, unsigned long irq u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; memset(&hw, 0, sizeof(hw)); - ide_init_hwif_ports(&hw, io, ctl, NULL); + ide_std_init_ports(&hw, io, ctl); hw.irq = irq; hw.chipset = ide_pci; hw.dev = &handle->dev; -- cgit v1.2.3 From 5ce78af4beeca6c80d8a4834f74297a8fa2e2253 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Sat, 2 Feb 2008 19:56:48 +0100 Subject: ide-tape: move historical changelog to Documentation/ide/ChangeLog.ide-tape.1995-2002 Also, cleanup whitespace and update comments. Bart: - remove reference to drivers/block/ide.c - move driver documentation to Documentation/ide/ide-tape.txt Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- Documentation/ide/ChangeLog.ide-tape.1995-2002 | 257 +++++++++++++++ Documentation/ide/ide-tape.txt | 146 +++++++++ drivers/ide/ide-tape.c | 414 +------------------------ 3 files changed, 407 insertions(+), 410 deletions(-) create mode 100644 Documentation/ide/ChangeLog.ide-tape.1995-2002 create mode 100644 Documentation/ide/ide-tape.txt diff --git a/Documentation/ide/ChangeLog.ide-tape.1995-2002 b/Documentation/ide/ChangeLog.ide-tape.1995-2002 new file mode 100644 index 00000000000..877fac8770b --- /dev/null +++ b/Documentation/ide/ChangeLog.ide-tape.1995-2002 @@ -0,0 +1,257 @@ +/* + * Ver 0.1 Nov 1 95 Pre-working code :-) + * Ver 0.2 Nov 23 95 A short backup (few megabytes) and restore procedure + * was successful ! (Using tar cvf ... on the block + * device interface). + * A longer backup resulted in major swapping, bad + * overall Linux performance and eventually failed as + * we received non serial read-ahead requests from the + * buffer cache. + * Ver 0.3 Nov 28 95 Long backups are now possible, thanks to the + * character device interface. Linux's responsiveness + * and performance doesn't seem to be much affected + * from the background backup procedure. + * Some general mtio.h magnetic tape operations are + * now supported by our character device. As a result, + * popular tape utilities are starting to work with + * ide tapes :-) + * The following configurations were tested: + * 1. An IDE ATAPI TAPE shares the same interface + * and irq with an IDE ATAPI CDROM. + * 2. An IDE ATAPI TAPE shares the same interface + * and irq with a normal IDE disk. + * Both configurations seemed to work just fine ! + * However, to be on the safe side, it is meanwhile + * recommended to give the IDE TAPE its own interface + * and irq. + * The one thing which needs to be done here is to + * add a "request postpone" feature to ide.c, + * so that we won't have to wait for the tape to finish + * performing a long media access (DSC) request (such + * as a rewind) before we can access the other device + * on the same interface. This effect doesn't disturb + * normal operation most of the time because read/write + * requests are relatively fast, and once we are + * performing one tape r/w request, a lot of requests + * from the other device can be queued and ide.c will + * service all of them after this single tape request. + * Ver 1.0 Dec 11 95 Integrated into Linux 1.3.46 development tree. + * On each read / write request, we now ask the drive + * if we can transfer a constant number of bytes + * (a parameter of the drive) only to its buffers, + * without causing actual media access. If we can't, + * we just wait until we can by polling the DSC bit. + * This ensures that while we are not transferring + * more bytes than the constant referred to above, the + * interrupt latency will not become too high and + * we won't cause an interrupt timeout, as happened + * occasionally in the previous version. + * While polling for DSC, the current request is + * postponed and ide.c is free to handle requests from + * the other device. This is handled transparently to + * ide.c. The hwgroup locking method which was used + * in the previous version was removed. + * Use of new general features which are provided by + * ide.c for use with atapi devices. + * (Programming done by Mark Lord) + * Few potential bug fixes (Again, suggested by Mark) + * Single character device data transfers are now + * not limited in size, as they were before. + * We are asking the tape about its recommended + * transfer unit and send a larger data transfer + * as several transfers of the above size. + * For best results, use an integral number of this + * basic unit (which is shown during driver + * initialization). I will soon add an ioctl to get + * this important parameter. + * Our data transfer buffer is allocated on startup, + * rather than before each data transfer. This should + * ensure that we will indeed have a data buffer. + * Ver 1.1 Dec 14 95 Fixed random problems which occurred when the tape + * shared an interface with another device. + * (poll_for_dsc was a complete mess). + * Removed some old (non-active) code which had + * to do with supporting buffer cache originated + * requests. + * The block device interface can now be opened, so + * that general ide driver features like the unmask + * interrupts flag can be selected with an ioctl. + * This is the only use of the block device interface. + * New fast pipelined operation mode (currently only on + * writes). When using the pipelined mode, the + * throughput can potentially reach the maximum + * tape supported throughput, regardless of the + * user backup program. On my tape drive, it sometimes + * boosted performance by a factor of 2. Pipelined + * mode is enabled by default, but since it has a few + * downfalls as well, you may want to disable it. + * A short explanation of the pipelined operation mode + * is available below. + * Ver 1.2 Jan 1 96 Eliminated pipelined mode race condition. + * Added pipeline read mode. As a result, restores + * are now as fast as backups. + * Optimized shared interface behavior. The new behavior + * typically results in better IDE bus efficiency and + * higher tape throughput. + * Pre-calculation of the expected read/write request + * service time, based on the tape's parameters. In + * the pipelined operation mode, this allows us to + * adjust our polling frequency to a much lower value, + * and thus to dramatically reduce our load on Linux, + * without any decrease in performance. + * Implemented additional mtio.h operations. + * The recommended user block size is returned by + * the MTIOCGET ioctl. + * Additional minor changes. + * Ver 1.3 Feb 9 96 Fixed pipelined read mode bug which prevented the + * use of some block sizes during a restore procedure. + * The character device interface will now present a + * continuous view of the media - any mix of block sizes + * during a backup/restore procedure is supported. The + * driver will buffer the requests internally and + * convert them to the tape's recommended transfer + * unit, making performance almost independent of the + * chosen user block size. + * Some improvements in error recovery. + * By cooperating with ide-dma.c, bus mastering DMA can + * now sometimes be used with IDE tape drives as well. + * Bus mastering DMA has the potential to dramatically + * reduce the CPU's overhead when accessing the device, + * and can be enabled by using hdparm -d1 on the tape's + * block device interface. For more info, read the + * comments in ide-dma.c. + * Ver 1.4 Mar 13 96 Fixed serialize support. + * Ver 1.5 Apr 12 96 Fixed shared interface operation, broken in 1.3.85. + * Fixed pipelined read mode inefficiency. + * Fixed nasty null dereferencing bug. + * Ver 1.6 Aug 16 96 Fixed FPU usage in the driver. + * Fixed end of media bug. + * Ver 1.7 Sep 10 96 Minor changes for the CONNER CTT8000-A model. + * Ver 1.8 Sep 26 96 Attempt to find a better balance between good + * interactive response and high system throughput. + * Ver 1.9 Nov 5 96 Automatically cross encountered filemarks rather + * than requiring an explicit FSF command. + * Abort pending requests at end of media. + * MTTELL was sometimes returning incorrect results. + * Return the real block size in the MTIOCGET ioctl. + * Some error recovery bug fixes. + * Ver 1.10 Nov 5 96 Major reorganization. + * Reduced CPU overhead a bit by eliminating internal + * bounce buffers. + * Added module support. + * Added multiple tape drives support. + * Added partition support. + * Rewrote DSC handling. + * Some portability fixes. + * Removed ide-tape.h. + * Additional minor changes. + * Ver 1.11 Dec 2 96 Bug fix in previous DSC timeout handling. + * Use ide_stall_queue() for DSC overlap. + * Use the maximum speed rather than the current speed + * to compute the request service time. + * Ver 1.12 Dec 7 97 Fix random memory overwriting and/or last block data + * corruption, which could occur if the total number + * of bytes written to the tape was not an integral + * number of tape blocks. + * Add support for INTERRUPT DRQ devices. + * Ver 1.13 Jan 2 98 Add "speed == 0" work-around for HP COLORADO 5GB + * Ver 1.14 Dec 30 98 Partial fixes for the Sony/AIWA tape drives. + * Replace cli()/sti() with hwgroup spinlocks. + * Ver 1.15 Mar 25 99 Fix SMP race condition by replacing hwgroup + * spinlock with private per-tape spinlock. + * Ver 1.16 Sep 1 99 Add OnStream tape support. + * Abort read pipeline on EOD. + * Wait for the tape to become ready in case it returns + * "in the process of becoming ready" on open(). + * Fix zero padding of the last written block in + * case the tape block size is larger than PAGE_SIZE. + * Decrease the default disconnection time to tn. + * Ver 1.16e Oct 3 99 Minor fixes. + * Ver 1.16e1 Oct 13 99 Patches by Arnold Niessen, + * niessen@iae.nl / arnold.niessen@philips.com + * GO-1) Undefined code in idetape_read_position + * according to Gadi's email + * AJN-1) Minor fix asc == 11 should be asc == 0x11 + * in idetape_issue_packet_command (did effect + * debugging output only) + * AJN-2) Added more debugging output, and + * added ide-tape: where missing. I would also + * like to add tape->name where possible + * AJN-3) Added different debug_level's + * via /proc/ide/hdc/settings + * "debug_level" determines amount of debugging output; + * can be changed using /proc/ide/hdx/settings + * 0 : almost no debugging output + * 1 : 0+output errors only + * 2 : 1+output all sensekey/asc + * 3 : 2+follow all chrdev related procedures + * 4 : 3+follow all procedures + * 5 : 4+include pc_stack rq_stack info + * 6 : 5+USE_COUNT updates + * AJN-4) Fixed timeout for retension in idetape_queue_pc_tail + * from 5 to 10 minutes + * AJN-5) Changed maximum number of blocks to skip when + * reading tapes with multiple consecutive write + * errors from 100 to 1000 in idetape_get_logical_blk + * Proposed changes to code: + * 1) output "logical_blk_num" via /proc + * 2) output "current_operation" via /proc + * 3) Either solve or document the fact that `mt rewind' is + * required after reading from /dev/nhtx to be + * able to rmmod the idetape module; + * Also, sometimes an application finishes but the + * device remains `busy' for some time. Same cause ? + * Proposed changes to release-notes: + * 4) write a simple `quickstart' section in the + * release notes; I volunteer if you don't want to + * 5) include a pointer to video4linux in the doc + * to stimulate video applications + * 6) release notes lines 331 and 362: explain what happens + * if the application data rate is higher than 1100 KB/s; + * similar approach to lower-than-500 kB/s ? + * 7) 6.6 Comparison; wouldn't it be better to allow different + * strategies for read and write ? + * Wouldn't it be better to control the tape buffer + * contents instead of the bandwidth ? + * 8) line 536: replace will by would (if I understand + * this section correctly, a hypothetical and unwanted situation + * is being described) + * Ver 1.16f Dec 15 99 Change place of the secondary OnStream header frames. + * Ver 1.17 Nov 2000 / Jan 2001 Marcel Mol, marcel@mesa.nl + * - Add idetape_onstream_mode_sense_tape_parameter_page + * function to get tape capacity in frames: tape->capacity. + * - Add support for DI-50 drives( or any DI- drive). + * - 'workaround' for read error/blank block around block 3000. + * - Implement Early warning for end of media for Onstream. + * - Cosmetic code changes for readability. + * - Idetape_position_tape should not use SKIP bit during + * Onstream read recovery. + * - Add capacity, logical_blk_num and first/last_frame_position + * to /proc/ide/hd?/settings. + * - Module use count was gone in the Linux 2.4 driver. + * Ver 1.17a Apr 2001 Willem Riede osst@riede.org + * - Get drive's actual block size from mode sense block descriptor + * - Limit size of pipeline + * Ver 1.17b Oct 2002 Alan Stern + * Changed IDETAPE_MIN_PIPELINE_STAGES to 1 and actually used + * it in the code! + * Actually removed aborted stages in idetape_abort_pipeline + * instead of just changing the command code. + * Made the transfer byte count for Request Sense equal to the + * actual length of the data transfer. + * Changed handling of partial data transfers: they do not + * cause DMA errors. + * Moved initiation of DMA transfers to the correct place. + * Removed reference to unallocated memory. + * Made __idetape_discard_read_pipeline return the number of + * sectors skipped, not the number of stages. + * Replaced errant kfree() calls with __idetape_kfree_stage(). + * Fixed off-by-one error in testing the pipeline length. + * Fixed handling of filemarks in the read pipeline. + * Small code optimization for MTBSF and MTBSFM ioctls. + * Don't try to unlock the door during device close if is + * already unlocked! + * Cosmetic fixes to miscellaneous debugging output messages. + * Set the minimum /proc/ide/hd?/settings values for "pipeline", + * "pipeline_min", and "pipeline_max" to 1. + */ diff --git a/Documentation/ide/ide-tape.txt b/Documentation/ide/ide-tape.txt new file mode 100644 index 00000000000..658f271a373 --- /dev/null +++ b/Documentation/ide/ide-tape.txt @@ -0,0 +1,146 @@ +/* + * IDE ATAPI streaming tape driver. + * + * This driver is a part of the Linux ide driver. + * + * The driver, in co-operation with ide.c, basically traverses the + * request-list for the block device interface. The character device + * interface, on the other hand, creates new requests, adds them + * to the request-list of the block device, and waits for their completion. + * + * Pipelined operation mode is now supported on both reads and writes. + * + * The block device major and minor numbers are determined from the + * tape's relative position in the ide interfaces, as explained in ide.c. + * + * The character device interface consists of the following devices: + * + * ht0 major 37, minor 0 first IDE tape, rewind on close. + * ht1 major 37, minor 1 second IDE tape, rewind on close. + * ... + * nht0 major 37, minor 128 first IDE tape, no rewind on close. + * nht1 major 37, minor 129 second IDE tape, no rewind on close. + * ... + * + * The general magnetic tape commands compatible interface, as defined by + * include/linux/mtio.h, is accessible through the character device. + * + * General ide driver configuration options, such as the interrupt-unmask + * flag, can be configured by issuing an ioctl to the block device interface, + * as any other ide device. + * + * Our own ide-tape ioctl's can be issued to either the block device or + * the character device interface. + * + * Maximal throughput with minimal bus load will usually be achieved in the + * following scenario: + * + * 1. ide-tape is operating in the pipelined operation mode. + * 2. No buffering is performed by the user backup program. + * + * Testing was done with a 2 GB CONNER CTMA 4000 IDE ATAPI Streaming Tape Drive. + * + * Here are some words from the first releases of hd.c, which are quoted + * in ide.c and apply here as well: + * + * | Special care is recommended. Have Fun! + * + * + * An overview of the pipelined operation mode. + * + * In the pipelined write mode, we will usually just add requests to our + * pipeline and return immediately, before we even start to service them. The + * user program will then have enough time to prepare the next request while + * we are still busy servicing previous requests. In the pipelined read mode, + * the situation is similar - we add read-ahead requests into the pipeline, + * before the user even requested them. + * + * The pipeline can be viewed as a "safety net" which will be activated when + * the system load is high and prevents the user backup program from keeping up + * with the current tape speed. At this point, the pipeline will get + * shorter and shorter but the tape will still be streaming at the same speed. + * Assuming we have enough pipeline stages, the system load will hopefully + * decrease before the pipeline is completely empty, and the backup program + * will be able to "catch up" and refill the pipeline again. + * + * When using the pipelined mode, it would be best to disable any type of + * buffering done by the user program, as ide-tape already provides all the + * benefits in the kernel, where it can be done in a more efficient way. + * As we will usually not block the user program on a request, the most + * efficient user code will then be a simple read-write-read-... cycle. + * Any additional logic will usually just slow down the backup process. + * + * Using the pipelined mode, I get a constant over 400 KBps throughput, + * which seems to be the maximum throughput supported by my tape. + * + * However, there are some downfalls: + * + * 1. We use memory (for data buffers) in proportional to the number + * of pipeline stages (each stage is about 26 KB with my tape). + * 2. In the pipelined write mode, we cheat and postpone error codes + * to the user task. In read mode, the actual tape position + * will be a bit further than the last requested block. + * + * Concerning (1): + * + * 1. We allocate stages dynamically only when we need them. When + * we don't need them, we don't consume additional memory. In + * case we can't allocate stages, we just manage without them + * (at the expense of decreased throughput) so when Linux is + * tight in memory, we will not pose additional difficulties. + * + * 2. The maximum number of stages (which is, in fact, the maximum + * amount of memory) which we allocate is limited by the compile + * time parameter IDETAPE_MAX_PIPELINE_STAGES. + * + * 3. The maximum number of stages is a controlled parameter - We + * don't start from the user defined maximum number of stages + * but from the lower IDETAPE_MIN_PIPELINE_STAGES (again, we + * will not even allocate this amount of stages if the user + * program can't handle the speed). We then implement a feedback + * loop which checks if the pipeline is empty, and if it is, we + * increase the maximum number of stages as necessary until we + * reach the optimum value which just manages to keep the tape + * busy with minimum allocated memory or until we reach + * IDETAPE_MAX_PIPELINE_STAGES. + * + * Concerning (2): + * + * In pipelined write mode, ide-tape can not return accurate error codes + * to the user program since we usually just add the request to the + * pipeline without waiting for it to be serviced. In case an error + * occurs, I will report it on the next user request. + * + * In the pipelined read mode, subsequent read requests or forward + * filemark spacing will perform correctly, as we preserve all blocks + * and filemarks which we encountered during our excess read-ahead. + * + * For accurate tape positioning and error reporting, disabling + * pipelined mode might be the best option. + * + * You can enable/disable/tune the pipelined operation mode by adjusting + * the compile time parameters below. + * + * + * Possible improvements. + * + * 1. Support for the ATAPI overlap protocol. + * + * In order to maximize bus throughput, we currently use the DSC + * overlap method which enables ide.c to service requests from the + * other device while the tape is busy executing a command. The + * DSC overlap method involves polling the tape's status register + * for the DSC bit, and servicing the other device while the tape + * isn't ready. + * + * In the current QIC development standard (December 1995), + * it is recommended that new tape drives will *in addition* + * implement the ATAPI overlap protocol, which is used for the + * same purpose - efficient use of the IDE bus, but is interrupt + * driven and thus has much less CPU overhead. + * + * ATAPI overlap is likely to be supported in most new ATAPI + * devices, including new ATAPI cdroms, and thus provides us + * a method by which we can achieve higher throughput when + * sharing a (fast) ATA-2 disk with any (slow) new ATAPI device. + */ diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index eff118ba217..045bd2ae0c0 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -1,424 +1,18 @@ /* + * IDE ATAPI streaming tape driver. + * * Copyright (C) 1995-1999 Gadi Oxman * Copyright (C) 2003-2005 Bartlomiej Zolnierkiewicz * - * $Header$ - * * This driver was constructed as a student project in the software laboratory * of the faculty of electrical engineering in the Technion - Israel's * Institute Of Technology, with the guide of Avner Lottem and Dr. Ilana David. * * It is hereby placed under the terms of the GNU general public license. * (See linux/COPYING). - */ - -/* - * IDE ATAPI streaming tape driver. - * - * This driver is a part of the Linux ide driver and works in co-operation - * with linux/drivers/block/ide.c. - * - * The driver, in co-operation with ide.c, basically traverses the - * request-list for the block device interface. The character device - * interface, on the other hand, creates new requests, adds them - * to the request-list of the block device, and waits for their completion. - * - * Pipelined operation mode is now supported on both reads and writes. - * - * The block device major and minor numbers are determined from the - * tape's relative position in the ide interfaces, as explained in ide.c. - * - * The character device interface consists of the following devices: - * - * ht0 major 37, minor 0 first IDE tape, rewind on close. - * ht1 major 37, minor 1 second IDE tape, rewind on close. - * ... - * nht0 major 37, minor 128 first IDE tape, no rewind on close. - * nht1 major 37, minor 129 second IDE tape, no rewind on close. - * ... - * - * Run linux/scripts/MAKEDEV.ide to create the above entries. - * - * The general magnetic tape commands compatible interface, as defined by - * include/linux/mtio.h, is accessible through the character device. - * - * General ide driver configuration options, such as the interrupt-unmask - * flag, can be configured by issuing an ioctl to the block device interface, - * as any other ide device. - * - * Our own ide-tape ioctl's can be issued to either the block device or - * the character device interface. - * - * Maximal throughput with minimal bus load will usually be achieved in the - * following scenario: - * - * 1. ide-tape is operating in the pipelined operation mode. - * 2. No buffering is performed by the user backup program. - * - * Testing was done with a 2 GB CONNER CTMA 4000 IDE ATAPI Streaming Tape Drive. - * - * Ver 0.1 Nov 1 95 Pre-working code :-) - * Ver 0.2 Nov 23 95 A short backup (few megabytes) and restore procedure - * was successful ! (Using tar cvf ... on the block - * device interface). - * A longer backup resulted in major swapping, bad - * overall Linux performance and eventually failed as - * we received non serial read-ahead requests from the - * buffer cache. - * Ver 0.3 Nov 28 95 Long backups are now possible, thanks to the - * character device interface. Linux's responsiveness - * and performance doesn't seem to be much affected - * from the background backup procedure. - * Some general mtio.h magnetic tape operations are - * now supported by our character device. As a result, - * popular tape utilities are starting to work with - * ide tapes :-) - * The following configurations were tested: - * 1. An IDE ATAPI TAPE shares the same interface - * and irq with an IDE ATAPI CDROM. - * 2. An IDE ATAPI TAPE shares the same interface - * and irq with a normal IDE disk. - * Both configurations seemed to work just fine ! - * However, to be on the safe side, it is meanwhile - * recommended to give the IDE TAPE its own interface - * and irq. - * The one thing which needs to be done here is to - * add a "request postpone" feature to ide.c, - * so that we won't have to wait for the tape to finish - * performing a long media access (DSC) request (such - * as a rewind) before we can access the other device - * on the same interface. This effect doesn't disturb - * normal operation most of the time because read/write - * requests are relatively fast, and once we are - * performing one tape r/w request, a lot of requests - * from the other device can be queued and ide.c will - * service all of them after this single tape request. - * Ver 1.0 Dec 11 95 Integrated into Linux 1.3.46 development tree. - * On each read / write request, we now ask the drive - * if we can transfer a constant number of bytes - * (a parameter of the drive) only to its buffers, - * without causing actual media access. If we can't, - * we just wait until we can by polling the DSC bit. - * This ensures that while we are not transferring - * more bytes than the constant referred to above, the - * interrupt latency will not become too high and - * we won't cause an interrupt timeout, as happened - * occasionally in the previous version. - * While polling for DSC, the current request is - * postponed and ide.c is free to handle requests from - * the other device. This is handled transparently to - * ide.c. The hwgroup locking method which was used - * in the previous version was removed. - * Use of new general features which are provided by - * ide.c for use with atapi devices. - * (Programming done by Mark Lord) - * Few potential bug fixes (Again, suggested by Mark) - * Single character device data transfers are now - * not limited in size, as they were before. - * We are asking the tape about its recommended - * transfer unit and send a larger data transfer - * as several transfers of the above size. - * For best results, use an integral number of this - * basic unit (which is shown during driver - * initialization). I will soon add an ioctl to get - * this important parameter. - * Our data transfer buffer is allocated on startup, - * rather than before each data transfer. This should - * ensure that we will indeed have a data buffer. - * Ver 1.1 Dec 14 95 Fixed random problems which occurred when the tape - * shared an interface with another device. - * (poll_for_dsc was a complete mess). - * Removed some old (non-active) code which had - * to do with supporting buffer cache originated - * requests. - * The block device interface can now be opened, so - * that general ide driver features like the unmask - * interrupts flag can be selected with an ioctl. - * This is the only use of the block device interface. - * New fast pipelined operation mode (currently only on - * writes). When using the pipelined mode, the - * throughput can potentially reach the maximum - * tape supported throughput, regardless of the - * user backup program. On my tape drive, it sometimes - * boosted performance by a factor of 2. Pipelined - * mode is enabled by default, but since it has a few - * downfalls as well, you may want to disable it. - * A short explanation of the pipelined operation mode - * is available below. - * Ver 1.2 Jan 1 96 Eliminated pipelined mode race condition. - * Added pipeline read mode. As a result, restores - * are now as fast as backups. - * Optimized shared interface behavior. The new behavior - * typically results in better IDE bus efficiency and - * higher tape throughput. - * Pre-calculation of the expected read/write request - * service time, based on the tape's parameters. In - * the pipelined operation mode, this allows us to - * adjust our polling frequency to a much lower value, - * and thus to dramatically reduce our load on Linux, - * without any decrease in performance. - * Implemented additional mtio.h operations. - * The recommended user block size is returned by - * the MTIOCGET ioctl. - * Additional minor changes. - * Ver 1.3 Feb 9 96 Fixed pipelined read mode bug which prevented the - * use of some block sizes during a restore procedure. - * The character device interface will now present a - * continuous view of the media - any mix of block sizes - * during a backup/restore procedure is supported. The - * driver will buffer the requests internally and - * convert them to the tape's recommended transfer - * unit, making performance almost independent of the - * chosen user block size. - * Some improvements in error recovery. - * By cooperating with ide-dma.c, bus mastering DMA can - * now sometimes be used with IDE tape drives as well. - * Bus mastering DMA has the potential to dramatically - * reduce the CPU's overhead when accessing the device, - * and can be enabled by using hdparm -d1 on the tape's - * block device interface. For more info, read the - * comments in ide-dma.c. - * Ver 1.4 Mar 13 96 Fixed serialize support. - * Ver 1.5 Apr 12 96 Fixed shared interface operation, broken in 1.3.85. - * Fixed pipelined read mode inefficiency. - * Fixed nasty null dereferencing bug. - * Ver 1.6 Aug 16 96 Fixed FPU usage in the driver. - * Fixed end of media bug. - * Ver 1.7 Sep 10 96 Minor changes for the CONNER CTT8000-A model. - * Ver 1.8 Sep 26 96 Attempt to find a better balance between good - * interactive response and high system throughput. - * Ver 1.9 Nov 5 96 Automatically cross encountered filemarks rather - * than requiring an explicit FSF command. - * Abort pending requests at end of media. - * MTTELL was sometimes returning incorrect results. - * Return the real block size in the MTIOCGET ioctl. - * Some error recovery bug fixes. - * Ver 1.10 Nov 5 96 Major reorganization. - * Reduced CPU overhead a bit by eliminating internal - * bounce buffers. - * Added module support. - * Added multiple tape drives support. - * Added partition support. - * Rewrote DSC handling. - * Some portability fixes. - * Removed ide-tape.h. - * Additional minor changes. - * Ver 1.11 Dec 2 96 Bug fix in previous DSC timeout handling. - * Use ide_stall_queue() for DSC overlap. - * Use the maximum speed rather than the current speed - * to compute the request service time. - * Ver 1.12 Dec 7 97 Fix random memory overwriting and/or last block data - * corruption, which could occur if the total number - * of bytes written to the tape was not an integral - * number of tape blocks. - * Add support for INTERRUPT DRQ devices. - * Ver 1.13 Jan 2 98 Add "speed == 0" work-around for HP COLORADO 5GB - * Ver 1.14 Dec 30 98 Partial fixes for the Sony/AIWA tape drives. - * Replace cli()/sti() with hwgroup spinlocks. - * Ver 1.15 Mar 25 99 Fix SMP race condition by replacing hwgroup - * spinlock with private per-tape spinlock. - * Ver 1.16 Sep 1 99 Add OnStream tape support. - * Abort read pipeline on EOD. - * Wait for the tape to become ready in case it returns - * "in the process of becoming ready" on open(). - * Fix zero padding of the last written block in - * case the tape block size is larger than PAGE_SIZE. - * Decrease the default disconnection time to tn. - * Ver 1.16e Oct 3 99 Minor fixes. - * Ver 1.16e1 Oct 13 99 Patches by Arnold Niessen, - * niessen@iae.nl / arnold.niessen@philips.com - * GO-1) Undefined code in idetape_read_position - * according to Gadi's email - * AJN-1) Minor fix asc == 11 should be asc == 0x11 - * in idetape_issue_packet_command (did effect - * debugging output only) - * AJN-2) Added more debugging output, and - * added ide-tape: where missing. I would also - * like to add tape->name where possible - * AJN-3) Added different debug_level's - * via /proc/ide/hdc/settings - * "debug_level" determines amount of debugging output; - * can be changed using /proc/ide/hdx/settings - * 0 : almost no debugging output - * 1 : 0+output errors only - * 2 : 1+output all sensekey/asc - * 3 : 2+follow all chrdev related procedures - * 4 : 3+follow all procedures - * 5 : 4+include pc_stack rq_stack info - * 6 : 5+USE_COUNT updates - * AJN-4) Fixed timeout for retension in idetape_queue_pc_tail - * from 5 to 10 minutes - * AJN-5) Changed maximum number of blocks to skip when - * reading tapes with multiple consecutive write - * errors from 100 to 1000 in idetape_get_logical_blk - * Proposed changes to code: - * 1) output "logical_blk_num" via /proc - * 2) output "current_operation" via /proc - * 3) Either solve or document the fact that `mt rewind' is - * required after reading from /dev/nhtx to be - * able to rmmod the idetape module; - * Also, sometimes an application finishes but the - * device remains `busy' for some time. Same cause ? - * Proposed changes to release-notes: - * 4) write a simple `quickstart' section in the - * release notes; I volunteer if you don't want to - * 5) include a pointer to video4linux in the doc - * to stimulate video applications - * 6) release notes lines 331 and 362: explain what happens - * if the application data rate is higher than 1100 KB/s; - * similar approach to lower-than-500 kB/s ? - * 7) 6.6 Comparison; wouldn't it be better to allow different - * strategies for read and write ? - * Wouldn't it be better to control the tape buffer - * contents instead of the bandwidth ? - * 8) line 536: replace will by would (if I understand - * this section correctly, a hypothetical and unwanted situation - * is being described) - * Ver 1.16f Dec 15 99 Change place of the secondary OnStream header frames. - * Ver 1.17 Nov 2000 / Jan 2001 Marcel Mol, marcel@mesa.nl - * - Add idetape_onstream_mode_sense_tape_parameter_page - * function to get tape capacity in frames: tape->capacity. - * - Add support for DI-50 drives( or any DI- drive). - * - 'workaround' for read error/blank block around block 3000. - * - Implement Early warning for end of media for Onstream. - * - Cosmetic code changes for readability. - * - Idetape_position_tape should not use SKIP bit during - * Onstream read recovery. - * - Add capacity, logical_blk_num and first/last_frame_position - * to /proc/ide/hd?/settings. - * - Module use count was gone in the Linux 2.4 driver. - * Ver 1.17a Apr 2001 Willem Riede osst@riede.org - * - Get drive's actual block size from mode sense block descriptor - * - Limit size of pipeline - * Ver 1.17b Oct 2002 Alan Stern - * Changed IDETAPE_MIN_PIPELINE_STAGES to 1 and actually used - * it in the code! - * Actually removed aborted stages in idetape_abort_pipeline - * instead of just changing the command code. - * Made the transfer byte count for Request Sense equal to the - * actual length of the data transfer. - * Changed handling of partial data transfers: they do not - * cause DMA errors. - * Moved initiation of DMA transfers to the correct place. - * Removed reference to unallocated memory. - * Made __idetape_discard_read_pipeline return the number of - * sectors skipped, not the number of stages. - * Replaced errant kfree() calls with __idetape_kfree_stage(). - * Fixed off-by-one error in testing the pipeline length. - * Fixed handling of filemarks in the read pipeline. - * Small code optimization for MTBSF and MTBSFM ioctls. - * Don't try to unlock the door during device close if is - * already unlocked! - * Cosmetic fixes to miscellaneous debugging output messages. - * Set the minimum /proc/ide/hd?/settings values for "pipeline", - * "pipeline_min", and "pipeline_max" to 1. - * - * Here are some words from the first releases of hd.c, which are quoted - * in ide.c and apply here as well: - * - * | Special care is recommended. Have Fun! - * - */ - -/* - * An overview of the pipelined operation mode. - * - * In the pipelined write mode, we will usually just add requests to our - * pipeline and return immediately, before we even start to service them. The - * user program will then have enough time to prepare the next request while - * we are still busy servicing previous requests. In the pipelined read mode, - * the situation is similar - we add read-ahead requests into the pipeline, - * before the user even requested them. - * - * The pipeline can be viewed as a "safety net" which will be activated when - * the system load is high and prevents the user backup program from keeping up - * with the current tape speed. At this point, the pipeline will get - * shorter and shorter but the tape will still be streaming at the same speed. - * Assuming we have enough pipeline stages, the system load will hopefully - * decrease before the pipeline is completely empty, and the backup program - * will be able to "catch up" and refill the pipeline again. - * - * When using the pipelined mode, it would be best to disable any type of - * buffering done by the user program, as ide-tape already provides all the - * benefits in the kernel, where it can be done in a more efficient way. - * As we will usually not block the user program on a request, the most - * efficient user code will then be a simple read-write-read-... cycle. - * Any additional logic will usually just slow down the backup process. - * - * Using the pipelined mode, I get a constant over 400 KBps throughput, - * which seems to be the maximum throughput supported by my tape. - * - * However, there are some downfalls: - * - * 1. We use memory (for data buffers) in proportional to the number - * of pipeline stages (each stage is about 26 KB with my tape). - * 2. In the pipelined write mode, we cheat and postpone error codes - * to the user task. In read mode, the actual tape position - * will be a bit further than the last requested block. - * - * Concerning (1): - * - * 1. We allocate stages dynamically only when we need them. When - * we don't need them, we don't consume additional memory. In - * case we can't allocate stages, we just manage without them - * (at the expense of decreased throughput) so when Linux is - * tight in memory, we will not pose additional difficulties. - * - * 2. The maximum number of stages (which is, in fact, the maximum - * amount of memory) which we allocate is limited by the compile - * time parameter IDETAPE_MAX_PIPELINE_STAGES. - * - * 3. The maximum number of stages is a controlled parameter - We - * don't start from the user defined maximum number of stages - * but from the lower IDETAPE_MIN_PIPELINE_STAGES (again, we - * will not even allocate this amount of stages if the user - * program can't handle the speed). We then implement a feedback - * loop which checks if the pipeline is empty, and if it is, we - * increase the maximum number of stages as necessary until we - * reach the optimum value which just manages to keep the tape - * busy with minimum allocated memory or until we reach - * IDETAPE_MAX_PIPELINE_STAGES. - * - * Concerning (2): - * - * In pipelined write mode, ide-tape can not return accurate error codes - * to the user program since we usually just add the request to the - * pipeline without waiting for it to be serviced. In case an error - * occurs, I will report it on the next user request. - * - * In the pipelined read mode, subsequent read requests or forward - * filemark spacing will perform correctly, as we preserve all blocks - * and filemarks which we encountered during our excess read-ahead. - * - * For accurate tape positioning and error reporting, disabling - * pipelined mode might be the best option. - * - * You can enable/disable/tune the pipelined operation mode by adjusting - * the compile time parameters below. - */ - -/* - * Possible improvements. - * - * 1. Support for the ATAPI overlap protocol. - * - * In order to maximize bus throughput, we currently use the DSC - * overlap method which enables ide.c to service requests from the - * other device while the tape is busy executing a command. The - * DSC overlap method involves polling the tape's status register - * for the DSC bit, and servicing the other device while the tape - * isn't ready. - * - * In the current QIC development standard (December 1995), - * it is recommended that new tape drives will *in addition* - * implement the ATAPI overlap protocol, which is used for the - * same purpose - efficient use of the IDE bus, but is interrupt - * driven and thus has much less CPU overhead. * - * ATAPI overlap is likely to be supported in most new ATAPI - * devices, including new ATAPI cdroms, and thus provides us - * a method by which we can achieve higher throughput when - * sharing a (fast) ATA-2 disk with any (slow) new ATAPI device. + * For a historical changelog see + * Documentation/ide/ChangeLog.ide-tape.1995-2002 */ #define IDETAPE_VERSION "1.19" -- cgit v1.2.3 From c7ea8a1b36487cb3002c2a626261c99a9f30790c Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Sat, 2 Feb 2008 19:56:48 +0100 Subject: ide-tape: remove dead code Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-tape.c | 34 ---------------------------------- 1 file changed, 34 deletions(-) diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 045bd2ae0c0..58c4c1bc35c 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -784,21 +784,6 @@ typedef struct { __u8 medium_type; /* Medium Type */ __u8 dsp; /* Device Specific Parameter */ __u8 bdl; /* Block Descriptor Length */ -#if 0 - /* data transfer page */ - __u8 page_code :6; - __u8 reserved0_6 :1; - __u8 ps :1; /* parameters saveable */ - __u8 page_length; /* page Length == 0x02 */ - __u8 reserved2; - __u8 read32k :1; /* 32k blk size (data only) */ - __u8 read32k5 :1; /* 32.5k blk size (data&AUX) */ - __u8 reserved3_23 :2; - __u8 write32k :1; /* 32k blk size (data only) */ - __u8 write32k5 :1; /* 32.5k blk size (data&AUX) */ - __u8 reserved3_6 :1; - __u8 streaming :1; /* streaming mode enable */ -#endif } idetape_mode_parameter_header_t; /* @@ -2006,12 +1991,6 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive, u8 stat; #if IDETAPE_DEBUG_LOG -#if 0 - if (tape->debug_level >= 5) - printk(KERN_INFO "ide-tape: %d, " - "dev: %s, cmd: %ld, errors: %d\n", - rq->rq_disk->disk_name, rq->cmd[0], rq->errors); -#endif if (tape->debug_level >= 2) printk(KERN_INFO "ide-tape: sector: %ld, " "nr_sectors: %ld, current_nr_sectors: %d\n", @@ -2723,19 +2702,6 @@ static void idetape_create_rewind_cmd (ide_drive_t *drive, idetape_pc_t *pc) pc->callback = &idetape_pc_callback; } -#if 0 -static void idetape_create_mode_select_cmd (idetape_pc_t *pc, int length) -{ - idetape_init_pc(pc); - set_bit(PC_WRITING, &pc->flags); - pc->c[0] = IDETAPE_MODE_SELECT_CMD; - pc->c[1] = 0x10; - put_unaligned(htons(length), (unsigned short *) &pc->c[3]); - pc->request_transfer = 255; - pc->callback = &idetape_pc_callback; -} -#endif - static void idetape_create_erase_cmd (idetape_pc_t *pc) { idetape_init_pc(pc); -- cgit v1.2.3 From 1b5db434f4a1f2c5e01de7d525d8f3c92a813f51 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Sat, 2 Feb 2008 19:56:48 +0100 Subject: ide-tape: remove struct idetape_request_sense_result_t Bart: - remove unnecessary comment change - remove two needless "!!" Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-tape.c | 75 +++++++++++++++----------------------------------- 1 file changed, 22 insertions(+), 53 deletions(-) diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 58c4c1bc35c..a7670fbd470 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -332,32 +332,6 @@ typedef struct idetape_stage_s { struct idetape_stage_s *next; /* Pointer to the next stage */ } idetape_stage_t; -/* - * REQUEST SENSE packet command result - Data Format. - */ -typedef struct { - unsigned error_code :7; /* Current of deferred errors */ - unsigned valid :1; /* The information field conforms to QIC-157C */ - __u8 reserved1 :8; /* Segment Number - Reserved */ - unsigned sense_key :4; /* Sense Key */ - unsigned reserved2_4 :1; /* Reserved */ - unsigned ili :1; /* Incorrect Length Indicator */ - unsigned eom :1; /* End Of Medium */ - unsigned filemark :1; /* Filemark */ - __u32 information __attribute__ ((packed)); - __u8 asl; /* Additional sense length (n-7) */ - __u32 command_specific; /* Additional command specific information */ - __u8 asc; /* Additional Sense Code */ - __u8 ascq; /* Additional Sense Code Qualifier */ - __u8 replaceable_unit_code; /* Field Replaceable Unit Code */ - unsigned sk_specific1 :7; /* Sense Key Specific */ - unsigned sksv :1; /* Sense Key Specific information is valid */ - __u8 sk_specific2; /* Sense Key Specific */ - __u8 sk_specific3; /* Sense Key Specific */ - __u8 pad[2]; /* Padding to 20 bytes */ -} idetape_request_sense_result_t; - - /* * Most of our global data which we need to save even as we leave the * driver due to an interrupt or a timer event is stored in a variable @@ -512,9 +486,6 @@ typedef struct ide_tape_obj { int avg_size; int avg_speed; - /* last sense information */ - idetape_request_sense_result_t sense; - char vendor_id[10]; char product_id[18]; char firmware_revision[6]; @@ -1025,36 +996,34 @@ static void idetape_init_pc (idetape_pc_t *pc) } /* - * idetape_analyze_error is called on each failed packet command retry - * to analyze the request sense. We currently do not utilize this - * information. + * called on each failed packet command retry to analyze the request sense. We + * currently do not utilize this information. */ -static void idetape_analyze_error (ide_drive_t *drive, idetape_request_sense_result_t *result) +static void idetape_analyze_error(ide_drive_t *drive, u8 *sense) { idetape_tape_t *tape = drive->driver_data; idetape_pc_t *pc = tape->failed_pc; - tape->sense = *result; - tape->sense_key = result->sense_key; - tape->asc = result->asc; - tape->ascq = result->ascq; + tape->sense_key = sense[2] & 0xF; + tape->asc = sense[12]; + tape->ascq = sense[13]; #if IDETAPE_DEBUG_LOG /* - * Without debugging, we only log an error if we decided to - * give up retrying. + * Without debugging, we only log an error if we decided to give up + * retrying. */ if (tape->debug_level >= 1) printk(KERN_INFO "ide-tape: pc = %x, sense key = %x, " "asc = %x, ascq = %x\n", - pc->c[0], result->sense_key, - result->asc, result->ascq); + pc->c[0], tape->sense_key, + tape->asc, tape->ascq); #endif /* IDETAPE_DEBUG_LOG */ - /* - * Correct pc->actually_transferred by asking the tape. - */ + /* Correct pc->actually_transferred by asking the tape. */ if (test_bit(PC_DMA_ERROR, &pc->flags)) { - pc->actually_transferred = pc->request_transfer - tape->tape_block_size * ntohl(get_unaligned(&result->information)); + pc->actually_transferred = pc->request_transfer - + tape->tape_block_size * + ntohl(get_unaligned((u32 *)&sense[3])); idetape_update_buffers(pc); } @@ -1064,28 +1033,28 @@ static void idetape_analyze_error (ide_drive_t *drive, idetape_request_sense_res * (i.e. Seagate STT3401A Travan) don't support 0-length read/writes. */ if ((pc->c[0] == IDETAPE_READ_CMD || pc->c[0] == IDETAPE_WRITE_CMD) - && pc->c[4] == 0 && pc->c[3] == 0 && pc->c[2] == 0) { /* length==0 */ - if (result->sense_key == 5) { + /* length == 0 */ + && pc->c[4] == 0 && pc->c[3] == 0 && pc->c[2] == 0) { + if (tape->sense_key == 5) { /* don't report an error, everything's ok */ pc->error = 0; /* don't retry read/write */ set_bit(PC_ABORT, &pc->flags); } } - if (pc->c[0] == IDETAPE_READ_CMD && result->filemark) { + if (pc->c[0] == IDETAPE_READ_CMD && (sense[2] & 0x80)) { pc->error = IDETAPE_ERROR_FILEMARK; set_bit(PC_ABORT, &pc->flags); } if (pc->c[0] == IDETAPE_WRITE_CMD) { - if (result->eom || - (result->sense_key == 0xd && result->asc == 0x0 && - result->ascq == 0x2)) { + if ((sense[2] & 0x40) || (tape->sense_key == 0xd + && tape->asc == 0x0 && tape->ascq == 0x2)) { pc->error = IDETAPE_ERROR_EOD; set_bit(PC_ABORT, &pc->flags); } } if (pc->c[0] == IDETAPE_READ_CMD || pc->c[0] == IDETAPE_WRITE_CMD) { - if (result->sense_key == 8) { + if (tape->sense_key == 8) { pc->error = IDETAPE_ERROR_EOD; set_bit(PC_ABORT, &pc->flags); } @@ -1327,7 +1296,7 @@ static ide_startstop_t idetape_request_sense_callback (ide_drive_t *drive) printk(KERN_INFO "ide-tape: Reached idetape_request_sense_callback\n"); #endif /* IDETAPE_DEBUG_LOG */ if (!tape->pc->error) { - idetape_analyze_error(drive, (idetape_request_sense_result_t *) tape->pc->buffer); + idetape_analyze_error(drive, tape->pc->buffer); idetape_end_request(drive, 1, 0); } else { printk(KERN_ERR "ide-tape: Error in REQUEST SENSE itself - Aborting request!\n"); -- cgit v1.2.3 From 47314fa4298cf77aa155393e09ffc8199dd2b581 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Sat, 2 Feb 2008 19:56:48 +0100 Subject: ide-tape: remove struct idetape_mode_parameter_header_t Bart: - remove 'capabilities->speed' chunk - re-add brackets to block_descrp assignment Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-tape.c | 37 +++++++++++++------------------------ 1 file changed, 13 insertions(+), 24 deletions(-) diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index a7670fbd470..ee92ff1fb74 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -747,16 +747,6 @@ typedef struct { #define IDETAPE_BLOCK_SIZE_PAGE 0x30 #define IDETAPE_BUFFER_FILLING_PAGE 0x33 -/* - * Mode Parameter Header for the MODE SENSE packet command - */ -typedef struct { - __u8 mode_data_length; /* Length of the following data transfer */ - __u8 medium_type; /* Medium Type */ - __u8 dsp; /* Device Specific Parameter */ - __u8 bdl; /* Block Descriptor Length */ -} idetape_mode_parameter_header_t; - /* * Mode Parameter Block Descriptor the MODE SENSE packet command * @@ -3914,9 +3904,8 @@ static void idetape_get_mode_sense_results (ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; idetape_pc_t pc; - idetape_mode_parameter_header_t *header; idetape_capabilities_page_t *capabilities; - + idetape_create_mode_sense_cmd(&pc, IDETAPE_CAPABILITIES_PAGE); if (idetape_queue_pc_tail(drive, &pc)) { printk(KERN_ERR "ide-tape: Can't get tape parameters - assuming some default values\n"); @@ -3926,8 +3915,8 @@ static void idetape_get_mode_sense_results (ide_drive_t *drive) tape->capabilities.buffer_size = 6 * 52; return; } - header = (idetape_mode_parameter_header_t *) pc.buffer; - capabilities = (idetape_capabilities_page_t *) (pc.buffer + sizeof(idetape_mode_parameter_header_t) + header->bdl); + capabilities = (idetape_capabilities_page_t *) + (pc.buffer + 4 + pc.buffer[3]); capabilities->max_speed = ntohs(capabilities->max_speed); capabilities->ctl = ntohs(capabilities->ctl); @@ -3952,11 +3941,13 @@ static void idetape_get_mode_sense_results (ide_drive_t *drive) #if IDETAPE_DEBUG_INFO printk(KERN_INFO "ide-tape: Dumping the results of the MODE SENSE packet command\n"); printk(KERN_INFO "ide-tape: Mode Parameter Header:\n"); - printk(KERN_INFO "ide-tape: Mode Data Length - %d\n",header->mode_data_length); - printk(KERN_INFO "ide-tape: Medium Type - %d\n",header->medium_type); - printk(KERN_INFO "ide-tape: Device Specific Parameter - %d\n",header->dsp); - printk(KERN_INFO "ide-tape: Block Descriptor Length - %d\n",header->bdl); - + printk(KERN_INFO "ide-tape: Mode Data Length - %d\n", pc.buffer[0]); + printk(KERN_INFO "ide-tape: Medium Type - %d\n", pc.buffer[1]); + printk(KERN_INFO "ide-tape: Device Specific Parameter - %d\n", + pc.buffer[2]); + printk(KERN_INFO "ide-tape: Block Descriptor Length - %d\n", + pc.buffer[3]); + printk(KERN_INFO "ide-tape: Capabilities and Mechanical Status Page:\n"); printk(KERN_INFO "ide-tape: Page code - %d\n",capabilities->page_code); printk(KERN_INFO "ide-tape: Page length - %d\n",capabilities->page_length); @@ -3989,9 +3980,8 @@ static void idetape_get_blocksize_from_block_descriptor(ide_drive_t *drive) idetape_tape_t *tape = drive->driver_data; idetape_pc_t pc; - idetape_mode_parameter_header_t *header; idetape_parameter_block_descriptor_t *block_descrp; - + idetape_create_mode_sense_cmd(&pc, IDETAPE_BLOCK_DESCRIPTOR); if (idetape_queue_pc_tail(drive, &pc)) { printk(KERN_ERR "ide-tape: Can't get block descriptor\n"); @@ -4001,10 +3991,9 @@ static void idetape_get_blocksize_from_block_descriptor(ide_drive_t *drive) } return; } - header = (idetape_mode_parameter_header_t *) pc.buffer; - block_descrp = (idetape_parameter_block_descriptor_t *) (pc.buffer + sizeof(idetape_mode_parameter_header_t)); + block_descrp = (idetape_parameter_block_descriptor_t *)(pc.buffer + 4); tape->tape_block_size =( block_descrp->length[0]<<16) + (block_descrp->length[1]<<8) + block_descrp->length[2]; - tape->drv_write_prot = (header->dsp & 0x80) >> 7; + tape->drv_write_prot = (pc.buffer[2] & 0x80) >> 7; #if IDETAPE_DEBUG_INFO printk(KERN_INFO "ide-tape: Adjusted block size - %d\n", tape->tape_block_size); -- cgit v1.2.3 From 16422de3579d1debf0b502fc94cac6327db29c4d Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sat, 2 Feb 2008 19:56:48 +0100 Subject: ide-tape: dump gcw fields on error in idetape_identify_device() Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-tape.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index ee92ff1fb74..bbf60ee582b 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -3852,16 +3852,17 @@ static int idetape_identify_device (ide_drive_t *drive) /* Check that we can support this device */ - if (gcw.protocol !=2 ) - printk(KERN_ERR "ide-tape: Protocol is not ATAPI\n"); + if (gcw.protocol != 2) + printk(KERN_ERR "ide-tape: Protocol (0x%02x) is not ATAPI\n", + gcw.protocol); else if (gcw.device_type != 1) - printk(KERN_ERR "ide-tape: Device type is not set to tape\n"); + printk(KERN_ERR "ide-tape: Device type (0x%02x) is not set " + "to tape\n", gcw.device_type); else if (!gcw.removable) printk(KERN_ERR "ide-tape: The removable flag is not set\n"); else if (gcw.packet_size != 0) { - printk(KERN_ERR "ide-tape: Packet size is not 12 bytes long\n"); - if (gcw.packet_size == 1) - printk(KERN_ERR "ide-tape: Sorry, padding to 16 bytes is still not supported\n"); + printk(KERN_ERR "ide-tape: Packet size (0x%02x) is not 12 " + "bytes long\n", gcw.packet_size); } else return 1; return 0; -- cgit v1.2.3 From f79f93a2f32ed4df8ccbf82db2e8ad283ee60495 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Sat, 2 Feb 2008 19:56:49 +0100 Subject: ide-tape: remove IDETAPE_DEBUG_INFO The device capabilities are probed for during device initialization so this info is available through proc/ioctl() und it is redundant here. Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-tape.c | 73 -------------------------------------------------- 1 file changed, 73 deletions(-) diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index bbf60ee582b..99084663a7c 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -106,7 +106,6 @@ typedef struct os_dat_s { /* * The following are used to debug the driver: * - * Setting IDETAPE_DEBUG_INFO to 1 will report device capabilities. * Setting IDETAPE_DEBUG_LOG to 1 will log driver flow control. * Setting IDETAPE_DEBUG_BUGS to 1 will enable self-sanity checks in * some places. @@ -121,7 +120,6 @@ typedef struct os_dat_s { * is verified to be stable enough. This will make it much more * esthetic. */ -#define IDETAPE_DEBUG_INFO 0 #define IDETAPE_DEBUG_LOG 0 #define IDETAPE_DEBUG_BUGS 1 @@ -3815,41 +3813,6 @@ static int idetape_identify_device (ide_drive_t *drive) *((unsigned short *) &gcw) = id->config; -#if IDETAPE_DEBUG_INFO - printk(KERN_INFO "ide-tape: Dumping ATAPI Identify Device tape parameters\n"); - printk(KERN_INFO "ide-tape: Protocol Type: "); - switch (gcw.protocol) { - case 0: case 1: printk("ATA\n");break; - case 2: printk("ATAPI\n");break; - case 3: printk("Reserved (Unknown to ide-tape)\n");break; - } - printk(KERN_INFO "ide-tape: Device Type: %x - ",gcw.device_type); - switch (gcw.device_type) { - case 0: printk("Direct-access Device\n");break; - case 1: printk("Streaming Tape Device\n");break; - case 2: case 3: case 4: printk("Reserved\n");break; - case 5: printk("CD-ROM Device\n");break; - case 6: printk("Reserved\n"); - case 7: printk("Optical memory Device\n");break; - case 0x1f: printk("Unknown or no Device type\n");break; - default: printk("Reserved\n"); - } - printk(KERN_INFO "ide-tape: Removable: %s",gcw.removable ? "Yes\n":"No\n"); - printk(KERN_INFO "ide-tape: Command Packet DRQ Type: "); - switch (gcw.drq_type) { - case 0: printk("Microprocessor DRQ\n");break; - case 1: printk("Interrupt DRQ\n");break; - case 2: printk("Accelerated DRQ\n");break; - case 3: printk("Reserved\n");break; - } - printk(KERN_INFO "ide-tape: Command Packet Size: "); - switch (gcw.packet_size) { - case 0: printk("12 bytes\n");break; - case 1: printk("16 bytes\n");break; - default: printk("Reserved\n");break; - } -#endif /* IDETAPE_DEBUG_INFO */ - /* Check that we can support this device */ if (gcw.protocol != 2) @@ -3938,38 +3901,6 @@ static void idetape_get_mode_sense_results (ide_drive_t *drive) tape->tape_block_size = 512; else if (capabilities->blk1024) tape->tape_block_size = 1024; - -#if IDETAPE_DEBUG_INFO - printk(KERN_INFO "ide-tape: Dumping the results of the MODE SENSE packet command\n"); - printk(KERN_INFO "ide-tape: Mode Parameter Header:\n"); - printk(KERN_INFO "ide-tape: Mode Data Length - %d\n", pc.buffer[0]); - printk(KERN_INFO "ide-tape: Medium Type - %d\n", pc.buffer[1]); - printk(KERN_INFO "ide-tape: Device Specific Parameter - %d\n", - pc.buffer[2]); - printk(KERN_INFO "ide-tape: Block Descriptor Length - %d\n", - pc.buffer[3]); - - printk(KERN_INFO "ide-tape: Capabilities and Mechanical Status Page:\n"); - printk(KERN_INFO "ide-tape: Page code - %d\n",capabilities->page_code); - printk(KERN_INFO "ide-tape: Page length - %d\n",capabilities->page_length); - printk(KERN_INFO "ide-tape: Read only - %s\n",capabilities->ro ? "Yes":"No"); - printk(KERN_INFO "ide-tape: Supports reverse space - %s\n",capabilities->sprev ? "Yes":"No"); - printk(KERN_INFO "ide-tape: Supports erase initiated formatting - %s\n",capabilities->efmt ? "Yes":"No"); - printk(KERN_INFO "ide-tape: Supports QFA two Partition format - %s\n",capabilities->qfa ? "Yes":"No"); - printk(KERN_INFO "ide-tape: Supports locking the medium - %s\n",capabilities->lock ? "Yes":"No"); - printk(KERN_INFO "ide-tape: The volume is currently locked - %s\n",capabilities->locked ? "Yes":"No"); - printk(KERN_INFO "ide-tape: The device defaults in the prevent state - %s\n",capabilities->prevent ? "Yes":"No"); - printk(KERN_INFO "ide-tape: Supports ejecting the medium - %s\n",capabilities->eject ? "Yes":"No"); - printk(KERN_INFO "ide-tape: Supports error correction - %s\n",capabilities->ecc ? "Yes":"No"); - printk(KERN_INFO "ide-tape: Supports data compression - %s\n",capabilities->cmprs ? "Yes":"No"); - printk(KERN_INFO "ide-tape: Supports 512 bytes block size - %s\n",capabilities->blk512 ? "Yes":"No"); - printk(KERN_INFO "ide-tape: Supports 1024 bytes block size - %s\n",capabilities->blk1024 ? "Yes":"No"); - printk(KERN_INFO "ide-tape: Supports 32768 bytes block size / Restricted byte count for PIO transfers - %s\n",capabilities->blk32768 ? "Yes":"No"); - printk(KERN_INFO "ide-tape: Maximum supported speed in KBps - %d\n",capabilities->max_speed); - printk(KERN_INFO "ide-tape: Continuous transfer limits in blocks - %d\n",capabilities->ctl); - printk(KERN_INFO "ide-tape: Current speed in KBps - %d\n",capabilities->speed); - printk(KERN_INFO "ide-tape: Buffer size - %d\n",capabilities->buffer_size*512); -#endif /* IDETAPE_DEBUG_INFO */ } /* @@ -3995,10 +3926,6 @@ static void idetape_get_blocksize_from_block_descriptor(ide_drive_t *drive) block_descrp = (idetape_parameter_block_descriptor_t *)(pc.buffer + 4); tape->tape_block_size =( block_descrp->length[0]<<16) + (block_descrp->length[1]<<8) + block_descrp->length[2]; tape->drv_write_prot = (pc.buffer[2] & 0x80) >> 7; - -#if IDETAPE_DEBUG_INFO - printk(KERN_INFO "ide-tape: Adjusted block size - %d\n", tape->tape_block_size); -#endif /* IDETAPE_DEBUG_INFO */ } #ifdef CONFIG_IDE_PROC_FS -- cgit v1.2.3 From 55a5d291fd6235edaab2dad974b236adf2ffbeae Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Sat, 2 Feb 2008 19:56:49 +0100 Subject: ide-tape: remove IDETAPE_DEBUG_BUGS Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-tape.c | 43 ++----------------------------------------- 1 file changed, 2 insertions(+), 41 deletions(-) diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 99084663a7c..3d15e8e729e 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -107,8 +107,6 @@ typedef struct os_dat_s { * The following are used to debug the driver: * * Setting IDETAPE_DEBUG_LOG to 1 will log driver flow control. - * Setting IDETAPE_DEBUG_BUGS to 1 will enable self-sanity checks in - * some places. * * Setting them to 0 will restore normal operation mode: * @@ -121,7 +119,6 @@ typedef struct os_dat_s { * esthetic. */ #define IDETAPE_DEBUG_LOG 0 -#define IDETAPE_DEBUG_BUGS 1 /* * After each failed packet command we issue a request sense command @@ -847,14 +844,12 @@ static void idetape_input_buffers (ide_drive_t *drive, idetape_pc_t *pc, unsigne int count; while (bcount) { -#if IDETAPE_DEBUG_BUGS if (bh == NULL) { printk(KERN_ERR "ide-tape: bh == NULL in " "idetape_input_buffers\n"); idetape_discard_data(drive, bcount); return; } -#endif /* IDETAPE_DEBUG_BUGS */ count = min((unsigned int)(bh->b_size - atomic_read(&bh->b_count)), bcount); HWIF(drive)->atapi_input_bytes(drive, bh->b_data + atomic_read(&bh->b_count), count); bcount -= count; @@ -874,13 +869,11 @@ static void idetape_output_buffers (ide_drive_t *drive, idetape_pc_t *pc, unsign int count; while (bcount) { -#if IDETAPE_DEBUG_BUGS if (bh == NULL) { printk(KERN_ERR "ide-tape: bh == NULL in " "idetape_output_buffers\n"); return; } -#endif /* IDETAPE_DEBUG_BUGS */ count = min((unsigned int)pc->b_count, (unsigned int)bcount); HWIF(drive)->atapi_output_bytes(drive, pc->b_data, count); bcount -= count; @@ -905,13 +898,11 @@ static void idetape_update_buffers (idetape_pc_t *pc) if (test_bit(PC_WRITING, &pc->flags)) return; while (bcount) { -#if IDETAPE_DEBUG_BUGS if (bh == NULL) { printk(KERN_ERR "ide-tape: bh == NULL in " "idetape_update_buffers\n"); return; } -#endif /* IDETAPE_DEBUG_BUGS */ count = min((unsigned int)bh->b_size, (unsigned int)bcount); atomic_set(&bh->b_count, count); if (atomic_read(&bh->b_count) == bh->b_size) @@ -1065,12 +1056,10 @@ static void idetape_active_next_stage (ide_drive_t *drive) if (tape->debug_level >= 4) printk(KERN_INFO "ide-tape: Reached idetape_active_next_stage\n"); #endif /* IDETAPE_DEBUG_LOG */ -#if IDETAPE_DEBUG_BUGS if (stage == NULL) { printk(KERN_ERR "ide-tape: bug: Trying to activate a non existing stage\n"); return; } -#endif /* IDETAPE_DEBUG_BUGS */ rq->rq_disk = tape->disk; rq->buffer = NULL; @@ -1145,28 +1134,24 @@ static void idetape_remove_stage_head (ide_drive_t *drive) if (tape->debug_level >= 4) printk(KERN_INFO "ide-tape: Reached idetape_remove_stage_head\n"); #endif /* IDETAPE_DEBUG_LOG */ -#if IDETAPE_DEBUG_BUGS if (tape->first_stage == NULL) { printk(KERN_ERR "ide-tape: bug: tape->first_stage is NULL\n"); - return; + return; } if (tape->active_stage == tape->first_stage) { printk(KERN_ERR "ide-tape: bug: Trying to free our active pipeline stage\n"); return; } -#endif /* IDETAPE_DEBUG_BUGS */ stage = tape->first_stage; tape->first_stage = stage->next; idetape_kfree_stage(tape, stage); tape->nr_stages--; if (tape->first_stage == NULL) { tape->last_stage = NULL; -#if IDETAPE_DEBUG_BUGS if (tape->next_stage != NULL) printk(KERN_ERR "ide-tape: bug: tape->next_stage != NULL\n"); if (tape->nr_stages) printk(KERN_ERR "ide-tape: bug: nr_stages should be 0 now\n"); -#endif /* IDETAPE_DEBUG_BUGS */ } } @@ -1654,13 +1639,11 @@ static ide_startstop_t idetape_issue_packet_command (ide_drive_t *drive, idetape int dma_ok = 0; u16 bcount; -#if IDETAPE_DEBUG_BUGS if (tape->pc->c[0] == IDETAPE_REQUEST_SENSE_CMD && pc->c[0] == IDETAPE_REQUEST_SENSE_CMD) { printk(KERN_ERR "ide-tape: possible ide-tape.c bug - " "Two request sense in serial were issued\n"); } -#endif /* IDETAPE_DEBUG_BUGS */ if (tape->failed_pc == NULL && pc->c[0] != IDETAPE_REQUEST_SENSE_CMD) tape->failed_pc = pc; @@ -1971,7 +1954,6 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive, tape->pc->c[0] == IDETAPE_REQUEST_SENSE_CMD) { return idetape_issue_packet_command(drive, tape->failed_pc); } -#if IDETAPE_DEBUG_BUGS if (postponed_rq != NULL) if (rq != postponed_rq) { printk(KERN_ERR "ide-tape: ide-tape.c bug - " @@ -1979,7 +1961,6 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive, idetape_end_request(drive, 0, 0); return ide_stopped; } -#endif /* IDETAPE_DEBUG_BUGS */ tape->postponed_rq = NULL; @@ -2166,13 +2147,11 @@ static int idetape_copy_stage_from_user (idetape_tape_t *tape, idetape_stage_t * int ret = 0; while (n) { -#if IDETAPE_DEBUG_BUGS if (bh == NULL) { printk(KERN_ERR "ide-tape: bh == NULL in " "idetape_copy_stage_from_user\n"); return 1; } -#endif /* IDETAPE_DEBUG_BUGS */ count = min((unsigned int)(bh->b_size - atomic_read(&bh->b_count)), (unsigned int)n); if (copy_from_user(bh->b_data + atomic_read(&bh->b_count), buf, count)) ret = 1; @@ -2196,13 +2175,11 @@ static int idetape_copy_stage_to_user (idetape_tape_t *tape, char __user *buf, i int ret = 0; while (n) { -#if IDETAPE_DEBUG_BUGS if (bh == NULL) { printk(KERN_ERR "ide-tape: bh == NULL in " "idetape_copy_stage_to_user\n"); return 1; } -#endif /* IDETAPE_DEBUG_BUGS */ count = min(tape->b_count, n); if (copy_to_user(buf, tape->b_data, count)) ret = 1; @@ -2282,12 +2259,10 @@ static void idetape_wait_for_request (ide_drive_t *drive, struct request *rq) DECLARE_COMPLETION_ONSTACK(wait); idetape_tape_t *tape = drive->driver_data; -#if IDETAPE_DEBUG_BUGS if (rq == NULL || !blk_special_request(rq)) { printk (KERN_ERR "ide-tape: bug: Trying to sleep on non-valid request\n"); return; } -#endif /* IDETAPE_DEBUG_BUGS */ rq->end_io_data = &wait; rq->end_io = blk_end_sync_rq; spin_unlock_irq(&tape->spinlock); @@ -2602,12 +2577,10 @@ static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks, struct if (tape->debug_level >= 2) printk(KERN_INFO "ide-tape: idetape_queue_rw_tail: cmd=%d\n",cmd); #endif /* IDETAPE_DEBUG_LOG */ -#if IDETAPE_DEBUG_BUGS if (idetape_pipeline_active(tape)) { printk(KERN_ERR "ide-tape: bug: the pipeline is active in idetape_queue_rw_tail\n"); return (0); } -#endif /* IDETAPE_DEBUG_BUGS */ idetape_init_rq(&rq, cmd); rq.rq_disk = tape->disk; @@ -2792,8 +2765,7 @@ static void idetape_empty_write_pipeline (ide_drive_t *drive) idetape_tape_t *tape = drive->driver_data; int blocks, min; struct idetape_bh *bh; - -#if IDETAPE_DEBUG_BUGS + if (tape->chrdev_direction != idetape_direction_write) { printk(KERN_ERR "ide-tape: bug: Trying to empty write pipeline, but we are not writing.\n"); return; @@ -2802,7 +2774,6 @@ static void idetape_empty_write_pipeline (ide_drive_t *drive) printk(KERN_ERR "ide-tape: bug: merge_buffer too big\n"); tape->merge_stage_size = tape->stage_size; } -#endif /* IDETAPE_DEBUG_BUGS */ if (tape->merge_stage_size) { blocks = tape->merge_stage_size / tape->tape_block_size; if (tape->merge_stage_size % tape->tape_block_size) { @@ -2847,7 +2818,6 @@ static void idetape_empty_write_pipeline (ide_drive_t *drive) * can be totally different on the next backup). */ tape->max_stages = tape->min_pipeline; -#if IDETAPE_DEBUG_BUGS if (tape->first_stage != NULL || tape->next_stage != NULL || tape->last_stage != NULL || @@ -2858,7 +2828,6 @@ static void idetape_empty_write_pipeline (ide_drive_t *drive) tape->first_stage, tape->next_stage, tape->last_stage, tape->nr_stages); } -#endif /* IDETAPE_DEBUG_BUGS */ } static void idetape_restart_speed_control (ide_drive_t *drive) @@ -2889,12 +2858,10 @@ static int idetape_initiate_read (ide_drive_t *drive, int max_stages) idetape_empty_write_pipeline(drive); idetape_flush_tape_buffers(drive); } -#if IDETAPE_DEBUG_BUGS if (tape->merge_stage || tape->merge_stage_size) { printk (KERN_ERR "ide-tape: merge_stage_size should be 0 now\n"); tape->merge_stage_size = 0; } -#endif /* IDETAPE_DEBUG_BUGS */ if ((tape->merge_stage = __idetape_kmalloc_stage(tape, 0, 0)) == NULL) return -ENOMEM; tape->chrdev_direction = idetape_direction_read; @@ -2995,12 +2962,10 @@ static int idetape_add_chrdev_read_request (ide_drive_t *drive,int blocks) tape->pipeline_head++; calculate_speeds(drive); } -#if IDETAPE_DEBUG_BUGS if (bytes_read > blocks * tape->tape_block_size) { printk(KERN_ERR "ide-tape: bug: trying to return more bytes than requested\n"); bytes_read = blocks * tape->tape_block_size; } -#endif /* IDETAPE_DEBUG_BUGS */ return (bytes_read); } @@ -3299,13 +3264,11 @@ static ssize_t idetape_chrdev_write (struct file *file, const char __user *buf, if (tape->chrdev_direction != idetape_direction_write) { if (tape->chrdev_direction == idetape_direction_read) idetape_discard_read_pipeline(drive, 1); -#if IDETAPE_DEBUG_BUGS if (tape->merge_stage || tape->merge_stage_size) { printk(KERN_ERR "ide-tape: merge_stage_size " "should be 0 now\n"); tape->merge_stage_size = 0; } -#endif /* IDETAPE_DEBUG_BUGS */ if ((tape->merge_stage = __idetape_kmalloc_stage(tape, 0, 0)) == NULL) return -ENOMEM; tape->chrdev_direction = idetape_direction_write; @@ -3333,12 +3296,10 @@ static ssize_t idetape_chrdev_write (struct file *file, const char __user *buf, if (tape->restart_speed_control_req) idetape_restart_speed_control(drive); if (tape->merge_stage_size) { -#if IDETAPE_DEBUG_BUGS if (tape->merge_stage_size >= tape->stage_size) { printk(KERN_ERR "ide-tape: bug: merge buffer too big\n"); tape->merge_stage_size = 0; } -#endif /* IDETAPE_DEBUG_BUGS */ actually_written = min((unsigned int)(tape->stage_size - tape->merge_stage_size), (unsigned int)count); if (idetape_copy_stage_from_user(tape, tape->merge_stage, buf, actually_written)) ret = -EFAULT; -- cgit v1.2.3 From b64220132640001438e4e9812e5f26a27993bf4d Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Sat, 2 Feb 2008 19:56:49 +0100 Subject: ide-tape: remove struct idetape_capabilities_page_t All those 2-byte values denoting the different capabilities are being written to the local copy of the caps buffer without being converted to big endian for simplicity of usage and shorter code later. Also, we add some comments stating which are the fields of the caps page in question in order to alleviate the cryptic pointer casting exercises as in e.g. idetape_get_mode_sense_results(). There should be no functional changes resulting from this patch. Bart: - remove two needless "!!" Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-tape.c | 142 +++++++++++++++++++------------------------------ 1 file changed, 56 insertions(+), 86 deletions(-) diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 3d15e8e729e..6fa6a38d811 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -259,47 +259,6 @@ typedef struct idetape_packet_command_s { /* Data direction */ #define PC_WRITING 5 -/* - * Capabilities and Mechanical Status Page - */ -typedef struct { - unsigned page_code :6; /* Page code - Should be 0x2a */ - __u8 reserved0_6 :1; - __u8 ps :1; /* parameters saveable */ - __u8 page_length; /* Page Length - Should be 0x12 */ - __u8 reserved2, reserved3; - unsigned ro :1; /* Read Only Mode */ - unsigned reserved4_1234 :4; - unsigned sprev :1; /* Supports SPACE in the reverse direction */ - unsigned reserved4_67 :2; - unsigned reserved5_012 :3; - unsigned efmt :1; /* Supports ERASE command initiated formatting */ - unsigned reserved5_4 :1; - unsigned qfa :1; /* Supports the QFA two partition formats */ - unsigned reserved5_67 :2; - unsigned lock :1; /* Supports locking the volume */ - unsigned locked :1; /* The volume is locked */ - unsigned prevent :1; /* The device defaults in the prevent state after power up */ - unsigned eject :1; /* The device can eject the volume */ - __u8 disconnect :1; /* The device can break request > ctl */ - __u8 reserved6_5 :1; - unsigned ecc :1; /* Supports error correction */ - unsigned cmprs :1; /* Supports data compression */ - unsigned reserved7_0 :1; - unsigned blk512 :1; /* Supports 512 bytes block size */ - unsigned blk1024 :1; /* Supports 1024 bytes block size */ - unsigned reserved7_3_6 :4; - unsigned blk32768 :1; /* slowb - the device restricts the byte count for PIO */ - /* transfers for slow buffer memory ??? */ - /* Also 32768 block size in some cases */ - __u16 max_speed; /* Maximum speed supported in KBps */ - __u8 reserved10, reserved11; - __u16 ctl; /* Continuous Transfer Limit in blocks */ - __u16 speed; /* Current Speed, in KBps */ - __u16 buffer_size; /* Buffer Size, in 512 bytes */ - __u8 reserved18, reserved19; -} idetape_capabilities_page_t; - /* * Block Size Page */ @@ -417,8 +376,9 @@ typedef struct ide_tape_obj { /* Usually 512 or 1024 bytes */ unsigned short tape_block_size; int user_bs_factor; + /* Copy of the tape's Capabilities and Mechanical Page */ - idetape_capabilities_page_t capabilities; + u8 caps[20]; /* * Active data transfer request parameters. @@ -2464,7 +2424,8 @@ static int idetape_create_prevent_cmd (ide_drive_t *drive, idetape_pc_t *pc, int { idetape_tape_t *tape = drive->driver_data; - if (!tape->capabilities.lock) + /* device supports locking according to capabilities page */ + if (!(tape->caps[6] & 0x01)) return 0; idetape_init_pc(pc); @@ -2850,7 +2811,7 @@ static int idetape_initiate_read (ide_drive_t *drive, int max_stages) idetape_stage_t *new_stage; struct request rq; int bytes_read; - int blocks = tape->capabilities.ctl; + u16 blocks = *(u16 *)&tape->caps[12]; /* Initialize read operation */ if (tape->chrdev_direction != idetape_direction_read) { @@ -3090,11 +3051,12 @@ static int idetape_space_over_filemarks (ide_drive_t *drive,short mt_op,int mt_c idetape_pc_t pc; unsigned long flags; int retval,count=0; + int sprev = !!(tape->caps[4] & 0x20); if (mt_count == 0) return 0; if (MTBSF == mt_op || MTBSFM == mt_op) { - if (!tape->capabilities.sprev) + if (!sprev) return -EIO; mt_count = - mt_count; } @@ -3148,7 +3110,7 @@ static int idetape_space_over_filemarks (ide_drive_t *drive,short mt_op,int mt_c return (idetape_queue_pc_tail(drive, &pc)); case MTFSFM: case MTBSFM: - if (!tape->capabilities.sprev) + if (!sprev) return (-EIO); retval = idetape_space_over_filemarks(drive, MTFSF, mt_count-count); if (retval) return (retval); @@ -3185,6 +3147,7 @@ static ssize_t idetape_chrdev_read (struct file *file, char __user *buf, ide_drive_t *drive = tape->drive; ssize_t bytes_read,temp, actually_read = 0, rc; ssize_t ret = 0; + u16 ctl = *(u16 *)&tape->caps[12]; #if IDETAPE_DEBUG_LOG if (tape->debug_level >= 3) @@ -3210,7 +3173,7 @@ static ssize_t idetape_chrdev_read (struct file *file, char __user *buf, count -= actually_read; } while (count >= tape->stage_size) { - bytes_read = idetape_add_chrdev_read_request(drive, tape->capabilities.ctl); + bytes_read = idetape_add_chrdev_read_request(drive, ctl); if (bytes_read <= 0) goto finish; if (idetape_copy_stage_to_user(tape, buf, tape->merge_stage, bytes_read)) @@ -3220,7 +3183,7 @@ static ssize_t idetape_chrdev_read (struct file *file, char __user *buf, actually_read += bytes_read; } if (count) { - bytes_read = idetape_add_chrdev_read_request(drive, tape->capabilities.ctl); + bytes_read = idetape_add_chrdev_read_request(drive, ctl); if (bytes_read <= 0) goto finish; temp = min((unsigned long)count, (unsigned long)bytes_read); @@ -3249,6 +3212,7 @@ static ssize_t idetape_chrdev_write (struct file *file, const char __user *buf, ide_drive_t *drive = tape->drive; ssize_t actually_written = 0; ssize_t ret = 0; + u16 ctl = *(u16 *)&tape->caps[12]; /* The drive is write protected. */ if (tape->write_prot) @@ -3310,7 +3274,7 @@ static ssize_t idetape_chrdev_write (struct file *file, const char __user *buf, if (tape->merge_stage_size == tape->stage_size) { ssize_t retval; tape->merge_stage_size = 0; - retval = idetape_add_chrdev_write_request(drive, tape->capabilities.ctl); + retval = idetape_add_chrdev_write_request(drive, ctl); if (retval <= 0) return (retval); } @@ -3321,7 +3285,7 @@ static ssize_t idetape_chrdev_write (struct file *file, const char __user *buf, ret = -EFAULT; buf += tape->stage_size; count -= tape->stage_size; - retval = idetape_add_chrdev_write_request(drive, tape->capabilities.ctl); + retval = idetape_add_chrdev_write_request(drive, ctl); actually_written += tape->stage_size; if (retval <= 0) return (retval); @@ -3821,46 +3785,52 @@ static void idetape_get_inquiry_results (ide_drive_t *drive) } /* - * idetape_get_mode_sense_results asks the tape about its various - * parameters. In particular, we will adjust our data transfer buffer - * size to the recommended value as returned by the tape. + * Ask the tape about its various parameters. In particular, we will adjust our + * data transfer buffer size to the recommended value as returned by the tape. */ static void idetape_get_mode_sense_results (ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; idetape_pc_t pc; - idetape_capabilities_page_t *capabilities; + u8 *caps; + u8 speed, max_speed; idetape_create_mode_sense_cmd(&pc, IDETAPE_CAPABILITIES_PAGE); if (idetape_queue_pc_tail(drive, &pc)) { - printk(KERN_ERR "ide-tape: Can't get tape parameters - assuming some default values\n"); + printk(KERN_ERR "ide-tape: Can't get tape parameters - assuming" + " some default values\n"); tape->tape_block_size = 512; - tape->capabilities.ctl = 52; - tape->capabilities.speed = 450; - tape->capabilities.buffer_size = 6 * 52; + put_unaligned(52, (u16 *)&tape->caps[12]); + put_unaligned(540, (u16 *)&tape->caps[14]); + put_unaligned(6*52, (u16 *)&tape->caps[16]); return; } - capabilities = (idetape_capabilities_page_t *) - (pc.buffer + 4 + pc.buffer[3]); + caps = pc.buffer + 4 + pc.buffer[3]; + + /* convert to host order and save for later use */ + speed = be16_to_cpu(*(u16 *)&caps[14]); + max_speed = be16_to_cpu(*(u16 *)&caps[8]); - capabilities->max_speed = ntohs(capabilities->max_speed); - capabilities->ctl = ntohs(capabilities->ctl); - capabilities->speed = ntohs(capabilities->speed); - capabilities->buffer_size = ntohs(capabilities->buffer_size); + put_unaligned(max_speed, (u16 *)&caps[8]); + put_unaligned(be16_to_cpu(*(u16 *)&caps[12]), (u16 *)&caps[12]); + put_unaligned(speed, (u16 *)&caps[14]); + put_unaligned(be16_to_cpu(*(u16 *)&caps[16]), (u16 *)&caps[16]); - if (!capabilities->speed) { - printk(KERN_INFO "ide-tape: %s: overriding capabilities->speed (assuming 650KB/sec)\n", drive->name); - capabilities->speed = 650; + if (!speed) { + printk(KERN_INFO "ide-tape: %s: invalid tape speed " + "(assuming 650KB/sec)\n", drive->name); + put_unaligned(650, (u16 *)&caps[14]); } - if (!capabilities->max_speed) { - printk(KERN_INFO "ide-tape: %s: overriding capabilities->max_speed (assuming 650KB/sec)\n", drive->name); - capabilities->max_speed = 650; + if (!max_speed) { + printk(KERN_INFO "ide-tape: %s: invalid max_speed " + "(assuming 650KB/sec)\n", drive->name); + put_unaligned(650, (u16 *)&caps[8]); } - tape->capabilities = *capabilities; /* Save us a copy */ - if (capabilities->blk512) + memcpy(&tape->caps, caps, 20); + if (caps[7] & 0x02) tape->tape_block_size = 512; - else if (capabilities->blk1024) + else if (caps[7] & 0x04) tape->tape_block_size = 1024; } @@ -3897,13 +3867,15 @@ static void idetape_add_settings (ide_drive_t *drive) /* * drive setting name read/write data type min max mul_factor div_factor data pointer set function */ - ide_add_setting(drive, "buffer", SETTING_READ, TYPE_SHORT, 0, 0xffff, 1, 2, &tape->capabilities.buffer_size, NULL); + ide_add_setting(drive, "buffer", SETTING_READ, TYPE_SHORT, 0, 0xffff, + 1, 2, (u16 *)&tape->caps[16], NULL); ide_add_setting(drive, "pipeline_min", SETTING_RW, TYPE_INT, 1, 0xffff, tape->stage_size / 1024, 1, &tape->min_pipeline, NULL); ide_add_setting(drive, "pipeline", SETTING_RW, TYPE_INT, 1, 0xffff, tape->stage_size / 1024, 1, &tape->max_stages, NULL); ide_add_setting(drive, "pipeline_max", SETTING_RW, TYPE_INT, 1, 0xffff, tape->stage_size / 1024, 1, &tape->max_pipeline, NULL); ide_add_setting(drive, "pipeline_used", SETTING_READ, TYPE_INT, 0, 0xffff, tape->stage_size / 1024, 1, &tape->nr_stages, NULL); ide_add_setting(drive, "pipeline_pending", SETTING_READ, TYPE_INT, 0, 0xffff, tape->stage_size / 1024, 1, &tape->nr_pending_stages, NULL); - ide_add_setting(drive, "speed", SETTING_READ, TYPE_SHORT, 0, 0xffff, 1, 1, &tape->capabilities.speed, NULL); + ide_add_setting(drive, "speed", SETTING_READ, TYPE_SHORT, 0, 0xffff, + 1, 1, (u16 *)&tape->caps[14], NULL); ide_add_setting(drive, "stage", SETTING_READ, TYPE_INT, 0, 0xffff, 1, 1024, &tape->stage_size, NULL); ide_add_setting(drive, "tdsc", SETTING_RW, TYPE_INT, IDETAPE_DSC_RW_MIN, IDETAPE_DSC_RW_MAX, 1000, HZ, &tape->best_dsc_rw_frequency, NULL); ide_add_setting(drive, "dsc_overlap", SETTING_RW, TYPE_BYTE, 0, 1, 1, 1, &drive->dsc_overlap, NULL); @@ -3935,6 +3907,7 @@ static void idetape_setup (ide_drive_t *drive, idetape_tape_t *tape, int minor) struct idetape_id_gcw gcw; int stage_size; struct sysinfo si; + u16 *ctl = (u16 *)&tape->caps[12]; spin_lock_init(&tape->spinlock); drive->dsc_overlap = 1; @@ -3964,11 +3937,11 @@ static void idetape_setup (ide_drive_t *drive, idetape_tape_t *tape, int minor) idetape_get_mode_sense_results(drive); idetape_get_blocksize_from_block_descriptor(drive); tape->user_bs_factor = 1; - tape->stage_size = tape->capabilities.ctl * tape->tape_block_size; + tape->stage_size = *ctl * tape->tape_block_size; while (tape->stage_size > 0xffff) { printk(KERN_NOTICE "ide-tape: decreasing stage size\n"); - tape->capabilities.ctl /= 2; - tape->stage_size = tape->capabilities.ctl * tape->tape_block_size; + *ctl /= 2; + tape->stage_size = *ctl * tape->tape_block_size; } stage_size = tape->stage_size; tape->pages_per_stage = stage_size / PAGE_SIZE; @@ -3977,11 +3950,8 @@ static void idetape_setup (ide_drive_t *drive, idetape_tape_t *tape, int minor) tape->excess_bh_size = PAGE_SIZE - stage_size % PAGE_SIZE; } - /* - * Select the "best" DSC read/write polling frequency - * and pipeline size. - */ - speed = max(tape->capabilities.speed, tape->capabilities.max_speed); + /* Select the "best" DSC read/write polling freq and pipeline size. */ + speed = max(*(u16 *)&tape->caps[14], *(u16 *)&tape->caps[8]); tape->max_stages = speed * 1000 * 10 / tape->stage_size; @@ -3998,7 +3968,7 @@ static void idetape_setup (ide_drive_t *drive, idetape_tape_t *tape, int minor) tape->max_stages = tape->min_pipeline = tape->max_pipeline = 1; t1 = (tape->stage_size * HZ) / (speed * 1000); - tmid = (tape->capabilities.buffer_size * 32 * HZ) / (speed * 125); + tmid = (*(u16 *)&tape->caps[16] * 32 * HZ) / (speed * 125); tn = (IDETAPE_FIFO_THRESHOLD * tape->stage_size * HZ) / (speed * 1000); if (tape->max_stages) @@ -4013,8 +3983,8 @@ static void idetape_setup (ide_drive_t *drive, idetape_tape_t *tape, int minor) tape->best_dsc_rw_frequency = max_t(unsigned long, min_t(unsigned long, t, IDETAPE_DSC_RW_MAX), IDETAPE_DSC_RW_MIN); printk(KERN_INFO "ide-tape: %s <-> %s: %dKBps, %d*%dkB buffer, " "%dkB pipeline, %lums tDSC%s\n", - drive->name, tape->name, tape->capabilities.speed, - (tape->capabilities.buffer_size * 512) / tape->stage_size, + drive->name, tape->name, *(u16 *)&tape->caps[14], + (*(u16 *)&tape->caps[16] * 512) / tape->stage_size, tape->stage_size / 1024, tape->max_stages * tape->stage_size / 1024, tape->best_dsc_rw_frequency * 1000 / HZ, -- cgit v1.2.3 From 6d29c8f0abc52c6e4643a04a9885d0c736528419 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Sat, 2 Feb 2008 19:56:49 +0100 Subject: ide-tape: remove struct idetape_inquiry_result_t There should be no functional changes resulting from this patch. Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-tape.c | 51 +++++++++++++------------------------------------- 1 file changed, 13 insertions(+), 38 deletions(-) diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 6fa6a38d811..5d23b70c685 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -648,31 +648,6 @@ struct idetape_id_gcw { unsigned protocol :2; /* Protocol type */ }; -/* - * INQUIRY packet command - Data Format (From Table 6-8 of QIC-157C) - */ -typedef struct { - unsigned device_type :5; /* Peripheral Device Type */ - unsigned reserved0_765 :3; /* Peripheral Qualifier - Reserved */ - unsigned reserved1_6t0 :7; /* Reserved */ - unsigned rmb :1; /* Removable Medium Bit */ - unsigned ansi_version :3; /* ANSI Version */ - unsigned ecma_version :3; /* ECMA Version */ - unsigned iso_version :2; /* ISO Version */ - unsigned response_format :4; /* Response Data Format */ - unsigned reserved3_45 :2; /* Reserved */ - unsigned reserved3_6 :1; /* TrmIOP - Reserved */ - unsigned reserved3_7 :1; /* AENC - Reserved */ - __u8 additional_length; /* Additional Length (total_length-4) */ - __u8 rsv5, rsv6, rsv7; /* Reserved */ - __u8 vendor_id[8]; /* Vendor Identification */ - __u8 product_id[16]; /* Product Identification */ - __u8 revision_level[4]; /* Revision Level */ - __u8 vendor_specific[20]; /* Vendor Specific - Optional */ - __u8 reserved56t95[40]; /* Reserved - Optional */ - /* Additional information may be returned */ -} idetape_inquiry_result_t; - /* * READ POSITION packet command - Data Format (From Table 6-57) */ @@ -3756,32 +3731,32 @@ static int idetape_identify_device (ide_drive_t *drive) return 0; } -/* - * Use INQUIRY to get the firmware revision - */ -static void idetape_get_inquiry_results (ide_drive_t *drive) +static void idetape_get_inquiry_results(ide_drive_t *drive) { char *r; idetape_tape_t *tape = drive->driver_data; idetape_pc_t pc; - idetape_inquiry_result_t *inquiry; - + idetape_create_inquiry_cmd(&pc); if (idetape_queue_pc_tail(drive, &pc)) { - printk(KERN_ERR "ide-tape: %s: can't get INQUIRY results\n", tape->name); + printk(KERN_ERR "ide-tape: %s: can't get INQUIRY results\n", + tape->name); return; } - inquiry = (idetape_inquiry_result_t *) pc.buffer; - memcpy(tape->vendor_id, inquiry->vendor_id, 8); - memcpy(tape->product_id, inquiry->product_id, 16); - memcpy(tape->firmware_revision, inquiry->revision_level, 4); + memcpy(tape->vendor_id, &pc.buffer[8], 8); + memcpy(tape->product_id, &pc.buffer[16], 16); + memcpy(tape->firmware_revision, &pc.buffer[32], 4); + ide_fixstring(tape->vendor_id, 10, 0); ide_fixstring(tape->product_id, 18, 0); ide_fixstring(tape->firmware_revision, 6, 0); r = tape->firmware_revision; if (*(r + 1) == '.') - tape->firmware_revision_num = (*r - '0') * 100 + (*(r + 2) - '0') * 10 + *(r + 3) - '0'; - printk(KERN_INFO "ide-tape: %s <-> %s: %s %s rev %s\n", drive->name, tape->name, tape->vendor_id, tape->product_id, tape->firmware_revision); + tape->firmware_revision_num = (*r - '0') * 100 + + (*(r + 2) - '0') * 10 + *(r + 3) - '0'; + printk(KERN_INFO "ide-tape: %s <-> %s: %s %s rev %s\n", + drive->name, tape->name, tape->vendor_id, + tape->product_id, tape->firmware_revision); } /* -- cgit v1.2.3 From 64a0e08682fc9b7b32ebf1add5e6ade09960dfab Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Sat, 2 Feb 2008 19:56:49 +0100 Subject: ide-tape: remove struct idetape_data_compression_page_t There should be no functional changes resulting from this patch. Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-tape.c | 19 ------------------- 1 file changed, 19 deletions(-) diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 5d23b70c685..b9ba7901f71 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -689,25 +689,6 @@ typedef struct { __u8 length[3]; /* Block Length */ } idetape_parameter_block_descriptor_t; -/* - * The Data Compression Page, as returned by the MODE SENSE packet command. - */ -typedef struct { - unsigned page_code :6; /* Page Code - Should be 0xf */ - unsigned reserved0 :1; /* Reserved */ - unsigned ps :1; - __u8 page_length; /* Page Length - Should be 14 */ - unsigned reserved2 :6; /* Reserved */ - unsigned dcc :1; /* Data Compression Capable */ - unsigned dce :1; /* Data Compression Enable */ - unsigned reserved3 :5; /* Reserved */ - unsigned red :2; /* Report Exception on Decompression */ - unsigned dde :1; /* Data Decompression Enable */ - __u32 ca; /* Compression Algorithm */ - __u32 da; /* Decompression Algorithm */ - __u8 reserved[4]; /* Reserved */ -} idetape_data_compression_page_t; - /* * The Medium Partition Page, as returned by the MODE SENSE packet command. */ -- cgit v1.2.3 From 496b92e65d8158bbcb978e3f746478cfa4c8542c Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Sat, 2 Feb 2008 19:56:49 +0100 Subject: ide-tape: remove struct idetape_medium_partition_page_t There should be no functional changes resulting from this patch. Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-tape.c | 19 ------------------- 1 file changed, 19 deletions(-) diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index b9ba7901f71..32f56eeb1ef 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -689,25 +689,6 @@ typedef struct { __u8 length[3]; /* Block Length */ } idetape_parameter_block_descriptor_t; -/* - * The Medium Partition Page, as returned by the MODE SENSE packet command. - */ -typedef struct { - unsigned page_code :6; /* Page Code - Should be 0x11 */ - unsigned reserved1_6 :1; /* Reserved */ - unsigned ps :1; - __u8 page_length; /* Page Length - Should be 6 */ - __u8 map; /* Maximum Additional Partitions - Should be 0 */ - __u8 apd; /* Additional Partitions Defined - Should be 0 */ - unsigned reserved4_012 :3; /* Reserved */ - unsigned psum :2; /* Should be 0 */ - unsigned idp :1; /* Should be 0 */ - unsigned sdp :1; /* Should be 0 */ - unsigned fdp :1; /* Fixed Data Partitions */ - __u8 mfr; /* Medium Format Recognition */ - __u8 reserved[2]; /* Reserved */ -} idetape_medium_partition_page_t; - /* * Run time configurable parameters. */ -- cgit v1.2.3 From 3cffb9ce476f492bab194892decc7bf1834ff96b Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Sat, 2 Feb 2008 19:56:50 +0100 Subject: ide-tape: remove struct idetape_parameter_block_descriptor_t Also, shorten function name idetape_get_blocksize_from_block_descriptor() and move its definition up thereby getting rid of its forward declaration. Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-tape.c | 66 ++++++++++++++++++++------------------------------ 1 file changed, 26 insertions(+), 40 deletions(-) diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 32f56eeb1ef..2a4a652e308 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -677,18 +677,6 @@ typedef struct { #define IDETAPE_BLOCK_SIZE_PAGE 0x30 #define IDETAPE_BUFFER_FILLING_PAGE 0x33 -/* - * Mode Parameter Block Descriptor the MODE SENSE packet command - * - * Support for block descriptors is optional. - */ -typedef struct { - __u8 density_code; /* Medium density code */ - __u8 blocks[3]; /* Number of blocks */ - __u8 reserved4; /* Reserved */ - __u8 length[3]; /* Block Length */ -} idetape_parameter_block_descriptor_t; - /* * Run time configurable parameters. */ @@ -3503,7 +3491,30 @@ static int idetape_chrdev_ioctl (struct inode *inode, struct file *file, unsigne } } -static void idetape_get_blocksize_from_block_descriptor(ide_drive_t *drive); +/* + * Do a mode sense page 0 with block descriptor and if it succeeds set the tape + * block size with the reported value. + */ +static void ide_tape_get_bsize_from_bdesc(ide_drive_t *drive) +{ + idetape_tape_t *tape = drive->driver_data; + idetape_pc_t pc; + + idetape_create_mode_sense_cmd(&pc, IDETAPE_BLOCK_DESCRIPTOR); + if (idetape_queue_pc_tail(drive, &pc)) { + printk(KERN_ERR "ide-tape: Can't get block descriptor\n"); + if (tape->tape_block_size == 0) { + printk(KERN_WARNING "ide-tape: Cannot deal with zero " + "block size, assuming 32k\n"); + tape->tape_block_size = 32768; + } + return; + } + tape->tape_block_size = (pc.buffer[4 + 5] << 16) + + (pc.buffer[4 + 6] << 8) + + pc.buffer[4 + 7]; + tape->drv_write_prot = (pc.buffer[2] & 0x80) >> 7; +} /* * Our character device open function. @@ -3557,7 +3568,7 @@ static int idetape_chrdev_open (struct inode *inode, struct file *filp) clear_bit(IDETAPE_PIPELINE_ERROR, &tape->flags); /* Read block size and write protect status from drive. */ - idetape_get_blocksize_from_block_descriptor(drive); + ide_tape_get_bsize_from_bdesc(drive); /* Set write protect flag if device is opened as read-only. */ if ((filp->f_flags & O_ACCMODE) == O_RDONLY) @@ -3771,31 +3782,6 @@ static void idetape_get_mode_sense_results (ide_drive_t *drive) tape->tape_block_size = 1024; } -/* - * ide_get_blocksize_from_block_descriptor does a mode sense page 0 with block descriptor - * and if it succeeds sets the tape block size with the reported value - */ -static void idetape_get_blocksize_from_block_descriptor(ide_drive_t *drive) -{ - - idetape_tape_t *tape = drive->driver_data; - idetape_pc_t pc; - idetape_parameter_block_descriptor_t *block_descrp; - - idetape_create_mode_sense_cmd(&pc, IDETAPE_BLOCK_DESCRIPTOR); - if (idetape_queue_pc_tail(drive, &pc)) { - printk(KERN_ERR "ide-tape: Can't get block descriptor\n"); - if (tape->tape_block_size == 0) { - printk(KERN_WARNING "ide-tape: Cannot deal with zero block size, assume 32k\n"); - tape->tape_block_size = 32768; - } - return; - } - block_descrp = (idetape_parameter_block_descriptor_t *)(pc.buffer + 4); - tape->tape_block_size =( block_descrp->length[0]<<16) + (block_descrp->length[1]<<8) + block_descrp->length[2]; - tape->drv_write_prot = (pc.buffer[2] & 0x80) >> 7; -} - #ifdef CONFIG_IDE_PROC_FS static void idetape_add_settings (ide_drive_t *drive) { @@ -3872,7 +3858,7 @@ static void idetape_setup (ide_drive_t *drive, idetape_tape_t *tape, int minor) idetape_get_inquiry_results(drive); idetape_get_mode_sense_results(drive); - idetape_get_blocksize_from_block_descriptor(drive); + ide_tape_get_bsize_from_bdesc(drive); tape->user_bs_factor = 1; tape->stage_size = *ctl * tape->tape_block_size; while (tape->stage_size > 0xffff) { -- cgit v1.2.3 From 323875549f3f3afd8cfedc6d6b73eccf055000e7 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Sat, 2 Feb 2008 19:56:50 +0100 Subject: ide-tape: remove structs os_partition_t, os_dat_entry_t, os_dat_t They seem just to sit there completely unused. Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-tape.c | 37 ------------------------------------- 1 file changed, 37 deletions(-) diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 2a4a652e308..8aa68d3735d 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -42,43 +42,6 @@ #include #include #include - -/* - * partition - */ -typedef struct os_partition_s { - __u8 partition_num; - __u8 par_desc_ver; - __u16 wrt_pass_cntr; - __u32 first_frame_addr; - __u32 last_frame_addr; - __u32 eod_frame_addr; -} os_partition_t; - -/* - * DAT entry - */ -typedef struct os_dat_entry_s { - __u32 blk_sz; - __u16 blk_cnt; - __u8 flags; - __u8 reserved; -} os_dat_entry_t; - -/* - * DAT - */ -#define OS_DAT_FLAGS_DATA (0xc) -#define OS_DAT_FLAGS_MARK (0x1) - -typedef struct os_dat_s { - __u8 dat_sz; - __u8 reserved1; - __u8 entry_cnt; - __u8 reserved3; - os_dat_entry_t dat_list[16]; -} os_dat_t; - #include /**************************** Tunable parameters *****************************/ -- cgit v1.2.3 From f011889d1df5c51daee3a93d3b3c4b134c751cc0 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Sat, 2 Feb 2008 19:56:50 +0100 Subject: ide-tape: remove struct idetape_block_size_page_t Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-tape.c | 18 ------------------ 1 file changed, 18 deletions(-) diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 8aa68d3735d..e7f25ff978d 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -222,24 +222,6 @@ typedef struct idetape_packet_command_s { /* Data direction */ #define PC_WRITING 5 -/* - * Block Size Page - */ -typedef struct { - unsigned page_code :6; /* Page code - Should be 0x30 */ - unsigned reserved1_6 :1; - unsigned ps :1; - __u8 page_length; /* Page Length - Should be 2 */ - __u8 reserved2; - unsigned play32 :1; - unsigned play32_5 :1; - unsigned reserved2_23 :2; - unsigned record32 :1; - unsigned record32_5 :1; - unsigned reserved2_6 :1; - unsigned one :1; -} idetape_block_size_page_t; - /* * A pipeline stage. */ -- cgit v1.2.3 From 90699ce2b28ec263651a4a0935a4651c57d68303 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Sat, 2 Feb 2008 19:56:50 +0100 Subject: ide-tape: use generic scsi commands Also, remove those which weren't used. Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-tape.c | 79 ++++++++++++++++++-------------------------------- 1 file changed, 29 insertions(+), 50 deletions(-) diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index e7f25ff978d..502ca06bcc0 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -36,6 +36,7 @@ #include #include #include +#include #include #include @@ -516,27 +517,6 @@ static void ide_tape_put(struct ide_tape_obj *tape) /* 0 = no tape is loaded, so we don't rewind after ejecting */ #define IDETAPE_MEDIUM_PRESENT 9 -/* - * Supported ATAPI tape drives packet commands - */ -#define IDETAPE_TEST_UNIT_READY_CMD 0x00 -#define IDETAPE_REWIND_CMD 0x01 -#define IDETAPE_REQUEST_SENSE_CMD 0x03 -#define IDETAPE_READ_CMD 0x08 -#define IDETAPE_WRITE_CMD 0x0a -#define IDETAPE_WRITE_FILEMARK_CMD 0x10 -#define IDETAPE_SPACE_CMD 0x11 -#define IDETAPE_INQUIRY_CMD 0x12 -#define IDETAPE_ERASE_CMD 0x19 -#define IDETAPE_MODE_SENSE_CMD 0x1a -#define IDETAPE_MODE_SELECT_CMD 0x15 -#define IDETAPE_LOAD_UNLOAD_CMD 0x1b -#define IDETAPE_PREVENT_CMD 0x1e -#define IDETAPE_LOCATE_CMD 0x2b -#define IDETAPE_READ_POSITION_CMD 0x34 -#define IDETAPE_READ_BUFFER_CMD 0x3c -#define IDETAPE_SET_SPEED_CMD 0xbb - /* * Some defines for the READ BUFFER command */ @@ -841,7 +821,7 @@ static void idetape_analyze_error(ide_drive_t *drive, u8 *sense) * with sense key=5, asc=0x22, ascq=0, let it slide. Some drives * (i.e. Seagate STT3401A Travan) don't support 0-length read/writes. */ - if ((pc->c[0] == IDETAPE_READ_CMD || pc->c[0] == IDETAPE_WRITE_CMD) + if ((pc->c[0] == READ_6 || pc->c[0] == WRITE_6) /* length == 0 */ && pc->c[4] == 0 && pc->c[3] == 0 && pc->c[2] == 0) { if (tape->sense_key == 5) { @@ -851,18 +831,18 @@ static void idetape_analyze_error(ide_drive_t *drive, u8 *sense) set_bit(PC_ABORT, &pc->flags); } } - if (pc->c[0] == IDETAPE_READ_CMD && (sense[2] & 0x80)) { + if (pc->c[0] == READ_6 && (sense[2] & 0x80)) { pc->error = IDETAPE_ERROR_FILEMARK; set_bit(PC_ABORT, &pc->flags); } - if (pc->c[0] == IDETAPE_WRITE_CMD) { + if (pc->c[0] == WRITE_6) { if ((sense[2] & 0x40) || (tape->sense_key == 0xd && tape->asc == 0x0 && tape->ascq == 0x2)) { pc->error = IDETAPE_ERROR_EOD; set_bit(PC_ABORT, &pc->flags); } } - if (pc->c[0] == IDETAPE_READ_CMD || pc->c[0] == IDETAPE_WRITE_CMD) { + if (pc->c[0] == READ_6 || pc->c[0] == WRITE_6) { if (tape->sense_key == 8) { pc->error = IDETAPE_ERROR_EOD; set_bit(PC_ABORT, &pc->flags); @@ -1111,7 +1091,7 @@ static ide_startstop_t idetape_request_sense_callback (ide_drive_t *drive) static void idetape_create_request_sense_cmd (idetape_pc_t *pc) { idetape_init_pc(pc); - pc->c[0] = IDETAPE_REQUEST_SENSE_CMD; + pc->c[0] = REQUEST_SENSE; pc->c[4] = 20; pc->request_transfer = 20; pc->callback = &idetape_request_sense_callback; @@ -1264,15 +1244,14 @@ static ide_startstop_t idetape_pc_intr (ide_drive_t *drive) local_irq_enable(); #if SIMULATE_ERRORS - if ((pc->c[0] == IDETAPE_WRITE_CMD || - pc->c[0] == IDETAPE_READ_CMD) && + if ((pc->c[0] == WRITE_6 || pc->c[0] == READ_6) && (++error_sim_count % 100) == 0) { printk(KERN_INFO "ide-tape: %s: simulating error\n", tape->name); stat |= ERR_STAT; } #endif - if ((stat & ERR_STAT) && pc->c[0] == IDETAPE_REQUEST_SENSE_CMD) + if ((stat & ERR_STAT) && pc->c[0] == REQUEST_SENSE) stat &= ~ERR_STAT; if ((stat & ERR_STAT) || test_bit(PC_DMA_ERROR, &pc->flags)) { /* Error detected */ @@ -1281,7 +1260,7 @@ static ide_startstop_t idetape_pc_intr (ide_drive_t *drive) printk(KERN_INFO "ide-tape: %s: I/O error\n", tape->name); #endif /* IDETAPE_DEBUG_LOG */ - if (pc->c[0] == IDETAPE_REQUEST_SENSE_CMD) { + if (pc->c[0] == REQUEST_SENSE) { printk(KERN_ERR "ide-tape: I/O error in request sense command\n"); return ide_do_reset(drive); } @@ -1469,13 +1448,13 @@ static ide_startstop_t idetape_issue_packet_command (ide_drive_t *drive, idetape int dma_ok = 0; u16 bcount; - if (tape->pc->c[0] == IDETAPE_REQUEST_SENSE_CMD && - pc->c[0] == IDETAPE_REQUEST_SENSE_CMD) { + if (tape->pc->c[0] == REQUEST_SENSE && + pc->c[0] == REQUEST_SENSE) { printk(KERN_ERR "ide-tape: possible ide-tape.c bug - " "Two request sense in serial were issued\n"); } - if (tape->failed_pc == NULL && pc->c[0] != IDETAPE_REQUEST_SENSE_CMD) + if (tape->failed_pc == NULL && pc->c[0] != REQUEST_SENSE) tape->failed_pc = pc; /* Set the current packet command */ tape->pc = pc; @@ -1488,7 +1467,7 @@ static ide_startstop_t idetape_issue_packet_command (ide_drive_t *drive, idetape * filemark, or end of the media, for example). */ if (!test_bit(PC_ABORT, &pc->flags)) { - if (!(pc->c[0] == IDETAPE_TEST_UNIT_READY_CMD && + if (!(pc->c[0] == TEST_UNIT_READY && tape->sense_key == 2 && tape->asc == 4 && (tape->ascq == 1 || tape->ascq == 8))) { printk(KERN_ERR "ide-tape: %s: I/O error, " @@ -1561,7 +1540,7 @@ static ide_startstop_t idetape_pc_callback (ide_drive_t *drive) static void idetape_create_mode_sense_cmd (idetape_pc_t *pc, u8 page_code) { idetape_init_pc(pc); - pc->c[0] = IDETAPE_MODE_SENSE_CMD; + pc->c[0] = MODE_SENSE; if (page_code != IDETAPE_BLOCK_DESCRIPTOR) pc->c[1] = 8; /* DBD = 1 - Don't return block descriptors */ pc->c[2] = page_code; @@ -1642,7 +1621,7 @@ static ide_startstop_t idetape_media_access_finished (ide_drive_t *drive) if (stat & SEEK_STAT) { if (stat & ERR_STAT) { /* Error detected */ - if (pc->c[0] != IDETAPE_TEST_UNIT_READY_CMD) + if (pc->c[0] != TEST_UNIT_READY) printk(KERN_ERR "ide-tape: %s: I/O error, ", tape->name); /* Retry operation */ @@ -1699,7 +1678,7 @@ static ide_startstop_t idetape_rw_callback (ide_drive_t *drive) static void idetape_create_read_cmd(idetape_tape_t *tape, idetape_pc_t *pc, unsigned int length, struct idetape_bh *bh) { idetape_init_pc(pc); - pc->c[0] = IDETAPE_READ_CMD; + pc->c[0] = READ_6; put_unaligned(htonl(length), (unsigned int *) &pc->c[1]); pc->c[1] = 1; pc->callback = &idetape_rw_callback; @@ -1717,7 +1696,7 @@ static void idetape_create_read_buffer_cmd(idetape_tape_t *tape, idetape_pc_t *p struct idetape_bh *p = bh; idetape_init_pc(pc); - pc->c[0] = IDETAPE_READ_BUFFER_CMD; + pc->c[0] = READ_BUFFER; pc->c[1] = IDETAPE_RETRIEVE_FAULTY_BLOCK; pc->c[7] = size >> 8; pc->c[8] = size & 0xff; @@ -1735,7 +1714,7 @@ static void idetape_create_read_buffer_cmd(idetape_tape_t *tape, idetape_pc_t *p static void idetape_create_write_cmd(idetape_tape_t *tape, idetape_pc_t *pc, unsigned int length, struct idetape_bh *bh) { idetape_init_pc(pc); - pc->c[0] = IDETAPE_WRITE_CMD; + pc->c[0] = WRITE_6; put_unaligned(htonl(length), (unsigned int *) &pc->c[1]); pc->c[1] = 1; pc->callback = &idetape_rw_callback; @@ -1781,7 +1760,7 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive, * Retry a failed packet command */ if (tape->failed_pc != NULL && - tape->pc->c[0] == IDETAPE_REQUEST_SENSE_CMD) { + tape->pc->c[0] == REQUEST_SENSE) { return idetape_issue_packet_command(drive, tape->failed_pc); } if (postponed_rq != NULL) @@ -2152,7 +2131,7 @@ static ide_startstop_t idetape_read_position_callback (ide_drive_t *drive) static void idetape_create_write_filemark_cmd (ide_drive_t *drive, idetape_pc_t *pc,int write_filemark) { idetape_init_pc(pc); - pc->c[0] = IDETAPE_WRITE_FILEMARK_CMD; + pc->c[0] = WRITE_FILEMARKS; pc->c[4] = write_filemark; set_bit(PC_WAIT_FOR_DSC, &pc->flags); pc->callback = &idetape_pc_callback; @@ -2161,7 +2140,7 @@ static void idetape_create_write_filemark_cmd (ide_drive_t *drive, idetape_pc_t static void idetape_create_test_unit_ready_cmd(idetape_pc_t *pc) { idetape_init_pc(pc); - pc->c[0] = IDETAPE_TEST_UNIT_READY_CMD; + pc->c[0] = TEST_UNIT_READY; pc->callback = &idetape_pc_callback; } @@ -2199,7 +2178,7 @@ static int __idetape_queue_pc_tail (ide_drive_t *drive, idetape_pc_t *pc) static void idetape_create_load_unload_cmd (ide_drive_t *drive, idetape_pc_t *pc,int cmd) { idetape_init_pc(pc); - pc->c[0] = IDETAPE_LOAD_UNLOAD_CMD; + pc->c[0] = START_STOP; pc->c[4] = cmd; set_bit(PC_WAIT_FOR_DSC, &pc->flags); pc->callback = &idetape_pc_callback; @@ -2256,7 +2235,7 @@ static int idetape_flush_tape_buffers (ide_drive_t *drive) static void idetape_create_read_position_cmd (idetape_pc_t *pc) { idetape_init_pc(pc); - pc->c[0] = IDETAPE_READ_POSITION_CMD; + pc->c[0] = READ_POSITION; pc->request_transfer = 20; pc->callback = &idetape_read_position_callback; } @@ -2282,7 +2261,7 @@ static int idetape_read_position (ide_drive_t *drive) static void idetape_create_locate_cmd (ide_drive_t *drive, idetape_pc_t *pc, unsigned int block, u8 partition, int skip) { idetape_init_pc(pc); - pc->c[0] = IDETAPE_LOCATE_CMD; + pc->c[0] = POSITION_TO_ELEMENT; pc->c[1] = 2; put_unaligned(htonl(block), (unsigned int *) &pc->c[3]); pc->c[8] = partition; @@ -2299,7 +2278,7 @@ static int idetape_create_prevent_cmd (ide_drive_t *drive, idetape_pc_t *pc, int return 0; idetape_init_pc(pc); - pc->c[0] = IDETAPE_PREVENT_CMD; + pc->c[0] = ALLOW_MEDIUM_REMOVAL; pc->c[4] = prevent; pc->callback = &idetape_pc_callback; return 1; @@ -2450,7 +2429,7 @@ static void idetape_insert_pipeline_into_queue (ide_drive_t *drive) static void idetape_create_inquiry_cmd (idetape_pc_t *pc) { idetape_init_pc(pc); - pc->c[0] = IDETAPE_INQUIRY_CMD; + pc->c[0] = INQUIRY; pc->c[4] = pc->request_transfer = 254; pc->callback = &idetape_pc_callback; } @@ -2458,7 +2437,7 @@ static void idetape_create_inquiry_cmd (idetape_pc_t *pc) static void idetape_create_rewind_cmd (ide_drive_t *drive, idetape_pc_t *pc) { idetape_init_pc(pc); - pc->c[0] = IDETAPE_REWIND_CMD; + pc->c[0] = REZERO_UNIT; set_bit(PC_WAIT_FOR_DSC, &pc->flags); pc->callback = &idetape_pc_callback; } @@ -2466,7 +2445,7 @@ static void idetape_create_rewind_cmd (ide_drive_t *drive, idetape_pc_t *pc) static void idetape_create_erase_cmd (idetape_pc_t *pc) { idetape_init_pc(pc); - pc->c[0] = IDETAPE_ERASE_CMD; + pc->c[0] = ERASE; pc->c[1] = 1; set_bit(PC_WAIT_FOR_DSC, &pc->flags); pc->callback = &idetape_pc_callback; @@ -2475,7 +2454,7 @@ static void idetape_create_erase_cmd (idetape_pc_t *pc) static void idetape_create_space_cmd (idetape_pc_t *pc,int count, u8 cmd) { idetape_init_pc(pc); - pc->c[0] = IDETAPE_SPACE_CMD; + pc->c[0] = SPACE; put_unaligned(htonl(count), (unsigned int *) &pc->c[1]); pc->c[1] = cmd; set_bit(PC_WAIT_FOR_DSC, &pc->flags); -- cgit v1.2.3 From 4278c2d5ba867f427d823e31947a6fb97508a1ce Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Sat, 2 Feb 2008 19:56:50 +0100 Subject: ide-tape: remove EXPERIMENTAL driver status ide-tape has depended on EXPERIMENTAL for ages. Change that since the driver is being only maintained now. Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/Kconfig | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index e42a465f571..45b26ed351c 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -216,8 +216,7 @@ config BLK_DEV_IDECD_VERBOSE_ERRORS memory, though. config BLK_DEV_IDETAPE - tristate "Include IDE/ATAPI TAPE support (EXPERIMENTAL)" - depends on EXPERIMENTAL + tristate "Include IDE/ATAPI TAPE support" help If you have an IDE tape drive using the ATAPI protocol, say Y. ATAPI is a newer protocol used by IDE tape and CD-ROM drives, -- cgit v1.2.3 From 860ff5ecbf352ee7a97685bf01fcd91f44b0ac72 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Sat, 2 Feb 2008 19:56:50 +0100 Subject: ide-tape: use generic byteorder macros This is not a network driver. Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-tape.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 502ca06bcc0..620cba04b1b 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -812,7 +812,7 @@ static void idetape_analyze_error(ide_drive_t *drive, u8 *sense) if (test_bit(PC_DMA_ERROR, &pc->flags)) { pc->actually_transferred = pc->request_transfer - tape->tape_block_size * - ntohl(get_unaligned((u32 *)&sense[3])); + be32_to_cpu(get_unaligned((u32 *)&sense[3])); idetape_update_buffers(pc); } @@ -1679,7 +1679,7 @@ static void idetape_create_read_cmd(idetape_tape_t *tape, idetape_pc_t *pc, unsi { idetape_init_pc(pc); pc->c[0] = READ_6; - put_unaligned(htonl(length), (unsigned int *) &pc->c[1]); + put_unaligned(cpu_to_be32(length), (unsigned int *) &pc->c[1]); pc->c[1] = 1; pc->callback = &idetape_rw_callback; pc->bh = bh; @@ -1715,7 +1715,7 @@ static void idetape_create_write_cmd(idetape_tape_t *tape, idetape_pc_t *pc, uns { idetape_init_pc(pc); pc->c[0] = WRITE_6; - put_unaligned(htonl(length), (unsigned int *) &pc->c[1]); + put_unaligned(cpu_to_be32(length), (unsigned int *) &pc->c[1]); pc->c[1] = 1; pc->callback = &idetape_rw_callback; set_bit(PC_WRITING, &pc->flags); @@ -2263,7 +2263,7 @@ static void idetape_create_locate_cmd (ide_drive_t *drive, idetape_pc_t *pc, uns idetape_init_pc(pc); pc->c[0] = POSITION_TO_ELEMENT; pc->c[1] = 2; - put_unaligned(htonl(block), (unsigned int *) &pc->c[3]); + put_unaligned(cpu_to_be32(block), (unsigned int *) &pc->c[3]); pc->c[8] = partition; set_bit(PC_WAIT_FOR_DSC, &pc->flags); pc->callback = &idetape_pc_callback; @@ -2455,7 +2455,7 @@ static void idetape_create_space_cmd (idetape_pc_t *pc,int count, u8 cmd) { idetape_init_pc(pc); pc->c[0] = SPACE; - put_unaligned(htonl(count), (unsigned int *) &pc->c[1]); + put_unaligned(cpu_to_be32(count), (unsigned int *) &pc->c[1]); pc->c[1] = cmd; set_bit(PC_WAIT_FOR_DSC, &pc->flags); pc->callback = &idetape_pc_callback; -- cgit v1.2.3 From fa36625bf7cb4f5ea5314b550898542f83cb5d4f Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Sat, 2 Feb 2008 19:56:51 +0100 Subject: ide-tape: remove unused sense packet commands. Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-tape.c | 9 +-------- 1 file changed, 1 insertion(+), 8 deletions(-) diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 620cba04b1b..2d4d2827110 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -591,16 +591,9 @@ typedef struct { u32 bytes_in_buffer; /* Bytes In Buffer (Optional) */ } idetape_read_position_result_t; -/* - * Follows structures which are related to the SELECT SENSE / MODE SENSE - * packet commands. Those packet commands are still not supported - * by ide-tape. - */ +/* Structures related to the SELECT SENSE / MODE SENSE packet commands. */ #define IDETAPE_BLOCK_DESCRIPTOR 0 #define IDETAPE_CAPABILITIES_PAGE 0x2a -#define IDETAPE_PARAMTR_PAGE 0x2b /* Onstream DI-x0 only */ -#define IDETAPE_BLOCK_SIZE_PAGE 0x30 -#define IDETAPE_BUFFER_FILLING_PAGE 0x33 /* * Run time configurable parameters. -- cgit v1.2.3 From 419d4741ce108a56ce59e9dc064730af59b7e843 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Sat, 2 Feb 2008 19:56:51 +0100 Subject: ide-tape: make function name more accurate idetape_active_next_stage() was rather ambiguous wrt its purpose. Make that more explicit and remove superfluous comment. Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-tape.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 2d4d2827110..8b9da8bb5cc 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -846,10 +846,7 @@ static void idetape_analyze_error(ide_drive_t *drive, u8 *sense) } } -/* - * idetape_active_next_stage will declare the next stage as "active". - */ -static void idetape_active_next_stage (ide_drive_t *drive) +static void idetape_activate_next_stage(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; idetape_stage_t *stage = tape->next_stage; @@ -1040,7 +1037,7 @@ static int idetape_end_request(ide_drive_t *drive, int uptodate, int nr_sects) } } if (tape->next_stage != NULL) { - idetape_active_next_stage(drive); + idetape_activate_next_stage(drive); /* * Insert the next request into the request queue. @@ -2414,7 +2411,7 @@ static void idetape_insert_pipeline_into_queue (ide_drive_t *drive) return; if (!idetape_pipeline_active(tape)) { set_bit(IDETAPE_PIPELINE_ACTIVE, &tape->flags); - idetape_active_next_stage(drive); + idetape_activate_next_stage(drive); (void) ide_do_drive_cmd(drive, tape->active_data_request, ide_end); } } -- cgit v1.2.3 From d99c9da2159fedac30b9a105a64af91dc572571b Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Sat, 2 Feb 2008 19:56:51 +0100 Subject: ide-tape: remove mtio.h related comments Those are already in mtio.h. Bart: - undo 'unsigned int/unsigned long' -> 'uint/ulong' conversion Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-tape.c | 96 ++++++++------------------------------------------ 1 file changed, 15 insertions(+), 81 deletions(-) diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 8b9da8bb5cc..06d21bba4ea 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -3152,69 +3152,20 @@ static int idetape_write_filemark (ide_drive_t *drive) } /* - * idetape_mtioctop is called from idetape_chrdev_ioctl when - * the general mtio MTIOCTOP ioctl is requested. + * Called from idetape_chrdev_ioctl when the general mtio MTIOCTOP ioctl is + * requested. * - * We currently support the following mtio.h operations: + * Note: MTBSF and MTBSFM are not supported when the tape doesn't support + * spacing over filemarks in the reverse direction. In this case, MTFSFM is also + * usually not supported (it is supported in the rare case in which we crossed + * the filemark during our read-ahead pipelined operation mode). * - * MTFSF - Space over mt_count filemarks in the positive direction. - * The tape is positioned after the last spaced filemark. + * The following commands are currently not supported: * - * MTFSFM - Same as MTFSF, but the tape is positioned before the - * last filemark. - * - * MTBSF - Steps background over mt_count filemarks, tape is - * positioned before the last filemark. - * - * MTBSFM - Like MTBSF, only tape is positioned after the last filemark. - * - * Note: - * - * MTBSF and MTBSFM are not supported when the tape doesn't - * support spacing over filemarks in the reverse direction. - * In this case, MTFSFM is also usually not supported (it is - * supported in the rare case in which we crossed the filemark - * during our read-ahead pipelined operation mode). - * - * MTWEOF - Writes mt_count filemarks. Tape is positioned after - * the last written filemark. - * - * MTREW - Rewinds tape. - * - * MTLOAD - Loads the tape. - * - * MTOFFL - Puts the tape drive "Offline": Rewinds the tape and - * MTUNLOAD prevents further access until the media is replaced. - * - * MTNOP - Flushes tape buffers. - * - * MTRETEN - Retension media. This typically consists of one end - * to end pass on the media. - * - * MTEOM - Moves to the end of recorded data. - * - * MTERASE - Erases tape. - * - * MTSETBLK - Sets the user block size to mt_count bytes. If - * mt_count is 0, we will attempt to autodetect - * the block size. - * - * MTSEEK - Positions the tape in a specific block number, where - * each block is assumed to contain which user_block_size - * bytes. - * - * MTSETPART - Switches to another tape partition. - * - * MTLOCK - Locks the tape door. - * - * MTUNLOCK - Unlocks the tape door. - * - * The following commands are currently not supported: - * - * MTFSS, MTBSS, MTWSM, MTSETDENSITY, - * MTSETDRVBUFFER, MT_ST_BOOLEANS, MT_ST_WRITE_THRESHOLD. + * MTFSS, MTBSS, MTWSM, MTSETDENSITY, MTSETDRVBUFFER, MT_ST_BOOLEANS, + * MT_ST_WRITE_THRESHOLD. */ -static int idetape_mtioctop (ide_drive_t *drive,short mt_op,int mt_count) +static int idetape_mtioctop(ide_drive_t *drive, short mt_op, int mt_count) { idetape_tape_t *tape = drive->driver_data; idetape_pc_t pc; @@ -3329,29 +3280,12 @@ static int idetape_mtioctop (ide_drive_t *drive,short mt_op,int mt_count) } /* - * Our character device ioctls. - * - * General mtio.h magnetic io commands are supported here, and not in - * the corresponding block interface. - * - * The following ioctls are supported: - * - * MTIOCTOP - Refer to idetape_mtioctop for detailed description. - * - * MTIOCGET - The mt_dsreg field in the returned mtget structure - * will be set to (user block size in bytes << - * MT_ST_BLKSIZE_SHIFT) & MT_ST_BLKSIZE_MASK. - * - * The mt_blkno is set to the current user block number. - * The other mtget fields are not supported. - * - * MTIOCPOS - The current tape "block position" is returned. We - * assume that each block contains user_block_size - * bytes. - * - * Our own ide-tape ioctls are supported on both interfaces. + * Our character device ioctls. General mtio.h magnetic io commands are + * supported here, and not in the corresponding block interface. Our own + * ide-tape ioctls are supported on both interfaces. */ -static int idetape_chrdev_ioctl (struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) +static int idetape_chrdev_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg) { struct ide_tape_obj *tape = ide_tape_f(file); ide_drive_t *drive = tape->drive; -- cgit v1.2.3 From d59823fa44f7d9babf586b3c705db314aa0f9822 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Sat, 2 Feb 2008 19:56:51 +0100 Subject: ide-tape: remove idetape_config_t typedef Since this is used only in idetape_blkdev_ioctl(), remove the typedef and make the struct function-local. Bart: - s/sizeof(struct idetape_config)/sizeof(config)/ Signed-off-by: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-tape.c | 20 ++++++++------------ 1 file changed, 8 insertions(+), 12 deletions(-) diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 06d21bba4ea..bf40d8c824a 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -595,15 +595,6 @@ typedef struct { #define IDETAPE_BLOCK_DESCRIPTOR 0 #define IDETAPE_CAPABILITIES_PAGE 0x2a -/* - * Run time configurable parameters. - */ -typedef struct { - int dsc_rw_frequency; - int dsc_media_access_frequency; - int nr_stages; -} idetape_config_t; - /* * The variables below are used for the character device interface. * Additional state variables are defined in our ide_drive_t structure. @@ -2849,16 +2840,21 @@ static int idetape_rewind_tape (ide_drive_t *drive) static int idetape_blkdev_ioctl(ide_drive_t *drive, unsigned int cmd, unsigned long arg) { idetape_tape_t *tape = drive->driver_data; - idetape_config_t config; void __user *argp = (void __user *)arg; + struct idetape_config { + int dsc_rw_frequency; + int dsc_media_access_frequency; + int nr_stages; + } config; + #if IDETAPE_DEBUG_LOG if (tape->debug_level >= 4) printk(KERN_INFO "ide-tape: Reached idetape_blkdev_ioctl\n"); #endif /* IDETAPE_DEBUG_LOG */ switch (cmd) { case 0x0340: - if (copy_from_user(&config, argp, sizeof (idetape_config_t))) + if (copy_from_user(&config, argp, sizeof(config))) return -EFAULT; tape->best_dsc_rw_frequency = config.dsc_rw_frequency; tape->max_stages = config.nr_stages; @@ -2866,7 +2862,7 @@ static int idetape_blkdev_ioctl(ide_drive_t *drive, unsigned int cmd, unsigned l case 0x0350: config.dsc_rw_frequency = (int) tape->best_dsc_rw_frequency; config.nr_stages = tape->max_stages; - if (copy_to_user(argp, &config, sizeof (idetape_config_t))) + if (copy_to_user(argp, &config, sizeof(config))) return -EFAULT; break; default: -- cgit v1.2.3