From 45dabf1427a0a876f733b07239ade1bdb0e06010 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Tue, 24 Jun 2008 13:30:23 +0800 Subject: sh: fix seq_file memory leak When using single_open(), single_release() should be used instead of seq_release(), otherwise there is a memory leak. Signed-off-by: Li Zefan Signed-off-by: Paul Mundt --- arch/sh/mm/cache-debugfs.c | 2 +- arch/sh/mm/pmb.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/sh/mm/cache-debugfs.c b/arch/sh/mm/cache-debugfs.c index c5b56d52b7d..0e189ccd4a7 100644 --- a/arch/sh/mm/cache-debugfs.c +++ b/arch/sh/mm/cache-debugfs.c @@ -120,7 +120,7 @@ static const struct file_operations cache_debugfs_fops = { .open = cache_debugfs_open, .read = seq_read, .llseek = seq_lseek, - .release = seq_release, + .release = single_release, }; static int __init cache_debugfs_init(void) diff --git a/arch/sh/mm/pmb.c b/arch/sh/mm/pmb.c index 46911bcbf17..cef727669c8 100644 --- a/arch/sh/mm/pmb.c +++ b/arch/sh/mm/pmb.c @@ -385,7 +385,7 @@ static const struct file_operations pmb_debugfs_fops = { .open = pmb_debugfs_open, .read = seq_read, .llseek = seq_lseek, - .release = seq_release, + .release = single_release, }; static int __init pmb_debugfs_init(void) -- cgit v1.2.3 From 82706b8f7bd1365e50478d3d0f6090f22e4571c7 Mon Sep 17 00:00:00 2001 From: Khem Raj Date: Thu, 3 Jul 2008 19:02:41 +0900 Subject: sh: Prevent leaking of CONFIG_SUPERH32 to userspace in asm/unistd.h. CONFIG_SUPERH32 is currently trickling into userspace unistd.h. Attached patch uses __SH5__ define in userspace. Signed-off-by: Khem Raj Signed-off-by: Paul Mundt --- include/asm-sh/unistd.h | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) diff --git a/include/asm-sh/unistd.h b/include/asm-sh/unistd.h index 4b21f369c28..65be656ead7 100644 --- a/include/asm-sh/unistd.h +++ b/include/asm-sh/unistd.h @@ -1,5 +1,13 @@ -#ifdef CONFIG_SUPERH32 -# include "unistd_32.h" +#ifdef __KERNEL__ +# ifdef CONFIG_SUPERH32 +# include "unistd_32.h" +# else +# include "unistd_64.h" +# endif #else -# include "unistd_64.h" +# ifdef __SH5__ +# include "unistd_64.h" +# else +# include "unistd_32.h" +# endif #endif -- cgit v1.2.3 From b19a33cabafbac56ba581e2a77ea6476db9118ab Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Wed, 18 Jun 2008 01:30:24 +0300 Subject: sh: export get_cpu_subtype This patch fixes the following build error: <-- snip --> ... MODPOST 1837 modules ERROR: "get_cpu_subtype" [arch/sh/oprofile/oprofile.ko] undefined! ... make[2]: *** [__modpost] Error 1 <-- snip --> Reported-by: Adrian Bunk Signed-off-by: Adrian Bunk Signed-off-by: Paul Mundt --- arch/sh/kernel/setup.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c index bca2bbc575d..9324cb91fd3 100644 --- a/arch/sh/kernel/setup.c +++ b/arch/sh/kernel/setup.c @@ -398,6 +398,7 @@ const char *get_cpu_subtype(struct sh_cpuinfo *c) { return cpu_name[c->type]; } +EXPORT_SYMBOL(get_cpu_subtype); #ifdef CONFIG_PROC_FS /* Symbolic CPU flags, keep in sync with asm/cpu-features.h */ -- cgit v1.2.3 From 7223ce29e8ca7313a75e8b902718c867d5997bb7 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Wed, 18 Jun 2008 01:30:40 +0300 Subject: sh dreamcast: export board_pci_channels This patch fixes the following build error: <-- snip --> ... MODPOST 1837 modules ERROR: "board_pci_channels" [drivers/pcmcia/yenta_socket.ko] undefined! ... make[2]: *** [__modpost] Error 1 <-- snip --> I freely admit that it's a pathological configuration, but as long as it is allowed it should build. Reported-by: Adrian Bunk Signed-off-by: Adrian Bunk Signed-off-by: Paul Mundt --- arch/sh/drivers/pci/ops-dreamcast.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/sh/drivers/pci/ops-dreamcast.c b/arch/sh/drivers/pci/ops-dreamcast.c index e1284fc6936..f54c291db37 100644 --- a/arch/sh/drivers/pci/ops-dreamcast.c +++ b/arch/sh/drivers/pci/ops-dreamcast.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include @@ -48,6 +49,7 @@ struct pci_channel board_pci_channels[] = { &gapspci_mem_resource, 0, 1 }, { 0, } }; +EXPORT_SYMBOL(board_pci_channels); /* * The !gapspci_config_access case really shouldn't happen, ever, unless -- cgit v1.2.3 From e3b08600902e119b34ca03c4aaf99bde4b173dde Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Wed, 18 Jun 2008 01:30:53 +0300 Subject: move arch/sh/lib/io.o to obj-y EXPORT_SYMBOL's in lib-y considered harmful: <-- snip --> ... MODPOST 1837 modules ERROR: "__raw_readsl" [drivers/ssb/ssb.ko] undefined! ERROR: "__raw_writesl" [drivers/ssb/ssb.ko] undefined! ERROR: "__raw_writesl" [drivers/net/smc91x.ko] undefined! ERROR: "__raw_readsl" [drivers/net/smc91x.ko] undefined! ERROR: "__raw_writesl" [drivers/net/3c59x.ko] undefined! ERROR: "__raw_readsl" [drivers/net/3c59x.ko] undefined! ... make[2]: *** [__modpost] Error 1 <-- snip --> Reported-by: Adrian Bunk Signed-off-by: Adrian Bunk Signed-off-by: Paul Mundt --- arch/sh/lib/Makefile | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/sh/lib/Makefile b/arch/sh/lib/Makefile index ebb55d1149f..8596cc78e18 100644 --- a/arch/sh/lib/Makefile +++ b/arch/sh/lib/Makefile @@ -2,9 +2,11 @@ # Makefile for SuperH-specific library files.. # -lib-y = delay.o io.o memset.o memmove.o memchr.o \ +lib-y = delay.o memset.o memmove.o memchr.o \ checksum.o strlen.o div64.o div64-generic.o +obj-y += io.o + memcpy-y := memcpy.o memcpy-$(CONFIG_CPU_SH4) := memcpy-sh4.o -- cgit v1.2.3 From 9b14ec35f03d89c88cba225add8b6eca15203964 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 19 May 2008 13:34:45 +0900 Subject: binfmt_elf_fdpic: Magical stack pointer index, for NEW_AUX_ENT compat. While implementing binfmt_elf_fdpic on SH it quickly became apparent that SH was the first platform to support both binfmt_elf_fdpic and binfmt_elf, as well as the only of the FDPIC platforms to make use of the auxvt. Currently binfmt_elf_fdpic uses a special version of NEW_AUX_ENT() where the first argument is the entry displacement after csp has been adjusted, being reset after each adjustment. As we have no ability to sort this out through the platform's ARCH_DLINFO, this index needs to be managed entirely in create_elf_fdpic_tables(). Presently none of the platforms that set their own auxvt entries are able to do so through their respective ARCH_DLINFOs when using binfmt_elf_fdpic. In addition to this, binfmt_elf_fdpic has been looking at DLINFO_ARCH_ITEMS for the number of architecture-specific entries in the auxvt. This is legacy cruft, and is not defined by any platforms in-tree, even those that make heavy use of the auxvt. AT_VECTOR_SIZE_ARCH is always available, and contains the number that is of interest here, so we switch to using that unconditionally as well. As this has direct bearing on how much stack is used, platforms that have configurable (or dynamically adjustable) NEW_AUX_ENT calls need to either make AT_VECTOR_SIZE_ARCH more fine-grained, or leave it as a worst-case and live with some lost stack space if those entries aren't pushed (some platforms may also need to purposely sacrifice some space here for alignment considerations, as noted in the code -- although not an issue for any FDPIC-capable platform today). Signed-off-by: Paul Mundt Acked-by: David Howells --- fs/binfmt_elf_fdpic.c | 45 +++++++++++++++++++++++++-------------------- 1 file changed, 25 insertions(+), 20 deletions(-) diff --git a/fs/binfmt_elf_fdpic.c b/fs/binfmt_elf_fdpic.c index fdeadab2f18..80c1f952ef7 100644 --- a/fs/binfmt_elf_fdpic.c +++ b/fs/binfmt_elf_fdpic.c @@ -470,6 +470,7 @@ static int create_elf_fdpic_tables(struct linux_binprm *bprm, char __user *u_platform, *p; long hwcap; int loop; + int nr; /* reset for each csp adjustment */ /* we're going to shovel a whole load of stuff onto the stack */ #ifdef CONFIG_MMU @@ -542,10 +543,7 @@ static int create_elf_fdpic_tables(struct linux_binprm *bprm, /* force 16 byte _final_ alignment here for generality */ #define DLINFO_ITEMS 13 - nitems = 1 + DLINFO_ITEMS + (k_platform ? 1 : 0); -#ifdef DLINFO_ARCH_ITEMS - nitems += DLINFO_ARCH_ITEMS; -#endif + nitems = 1 + DLINFO_ITEMS + (k_platform ? 1 : 0) + AT_VECTOR_SIZE_ARCH; csp = sp; sp -= nitems * 2 * sizeof(unsigned long); @@ -557,39 +555,46 @@ static int create_elf_fdpic_tables(struct linux_binprm *bprm, sp -= sp & 15UL; /* put the ELF interpreter info on the stack */ -#define NEW_AUX_ENT(nr, id, val) \ +#define NEW_AUX_ENT(id, val) \ do { \ struct { unsigned long _id, _val; } __user *ent; \ \ ent = (void __user *) csp; \ __put_user((id), &ent[nr]._id); \ __put_user((val), &ent[nr]._val); \ + nr++; \ } while (0) + nr = 0; csp -= 2 * sizeof(unsigned long); - NEW_AUX_ENT(0, AT_NULL, 0); + NEW_AUX_ENT(AT_NULL, 0); if (k_platform) { + nr = 0; csp -= 2 * sizeof(unsigned long); - NEW_AUX_ENT(0, AT_PLATFORM, + NEW_AUX_ENT(AT_PLATFORM, (elf_addr_t) (unsigned long) u_platform); } + nr = 0; csp -= DLINFO_ITEMS * 2 * sizeof(unsigned long); - NEW_AUX_ENT( 0, AT_HWCAP, hwcap); - NEW_AUX_ENT( 1, AT_PAGESZ, PAGE_SIZE); - NEW_AUX_ENT( 2, AT_CLKTCK, CLOCKS_PER_SEC); - NEW_AUX_ENT( 3, AT_PHDR, exec_params->ph_addr); - NEW_AUX_ENT( 4, AT_PHENT, sizeof(struct elf_phdr)); - NEW_AUX_ENT( 5, AT_PHNUM, exec_params->hdr.e_phnum); - NEW_AUX_ENT( 6, AT_BASE, interp_params->elfhdr_addr); - NEW_AUX_ENT( 7, AT_FLAGS, 0); - NEW_AUX_ENT( 8, AT_ENTRY, exec_params->entry_addr); - NEW_AUX_ENT( 9, AT_UID, (elf_addr_t) current->uid); - NEW_AUX_ENT(10, AT_EUID, (elf_addr_t) current->euid); - NEW_AUX_ENT(11, AT_GID, (elf_addr_t) current->gid); - NEW_AUX_ENT(12, AT_EGID, (elf_addr_t) current->egid); + NEW_AUX_ENT(AT_HWCAP, hwcap); + NEW_AUX_ENT(AT_PAGESZ, PAGE_SIZE); + NEW_AUX_ENT(AT_CLKTCK, CLOCKS_PER_SEC); + NEW_AUX_ENT(AT_PHDR, exec_params->ph_addr); + NEW_AUX_ENT(AT_PHENT, sizeof(struct elf_phdr)); + NEW_AUX_ENT(AT_PHNUM, exec_params->hdr.e_phnum); + NEW_AUX_ENT(AT_BASE, interp_params->elfhdr_addr); + NEW_AUX_ENT(AT_FLAGS, 0); + NEW_AUX_ENT(AT_ENTRY, exec_params->entry_addr); + NEW_AUX_ENT(AT_UID, (elf_addr_t) current->uid); + NEW_AUX_ENT(AT_EUID, (elf_addr_t) current->euid); + NEW_AUX_ENT(AT_GID, (elf_addr_t) current->gid); + NEW_AUX_ENT(AT_EGID, (elf_addr_t) current->egid); #ifdef ARCH_DLINFO + nr = 0; + csp -= AT_VECTOR_SIZE_ARCH * 2 * sizeof(unsigned long); + /* ARCH_DLINFO must come last so platform specific code can enforce * special alignment requirements on the AUXV if necessary (eg. PPC). */ -- cgit v1.2.3 From 3bc24a1a5441ef621daf737ec93b0a10e8999d59 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 19 May 2008 13:40:12 +0900 Subject: sh: Initial ELF FDPIC support. This adds initial support for ELF FDPIC on MMU-less SH, as per version 0.2 of the ABI definition at: http://www.codesourcery.com/public/docs/sh-fdpic/sh-fdpic-abi.txt Signed-off-by: Paul Mundt --- arch/sh/kernel/ptrace_32.c | 23 ++++++++++++++++++++ arch/sh/kernel/signal_32.c | 25 ++++++++++++++++++++-- fs/Kconfig.binfmt | 2 +- include/asm-sh/elf.h | 53 +++++++++++++++++++++++++++++++++++++++++++++- include/asm-sh/mmu.h | 4 ++++ include/asm-sh/ptrace.h | 5 +++++ 6 files changed, 108 insertions(+), 4 deletions(-) diff --git a/arch/sh/kernel/ptrace_32.c b/arch/sh/kernel/ptrace_32.c index fddb547f3c2..2bc72def5cf 100644 --- a/arch/sh/kernel/ptrace_32.c +++ b/arch/sh/kernel/ptrace_32.c @@ -240,6 +240,29 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) } break; } +#endif +#ifdef CONFIG_BINFMT_ELF_FDPIC + case PTRACE_GETFDPIC: { + unsigned long tmp = 0; + + switch (addr) { + case PTRACE_GETFDPIC_EXEC: + tmp = child->mm->context.exec_fdpic_loadmap; + break; + case PTRACE_GETFDPIC_INTERP: + tmp = child->mm->context.interp_fdpic_loadmap; + break; + default: + break; + } + + ret = 0; + if (put_user(tmp, (unsigned long *) data)) { + ret = -EFAULT; + break; + } + break; + } #endif default: ret = ptrace_request(child, request, addr, data); diff --git a/arch/sh/kernel/signal_32.c b/arch/sh/kernel/signal_32.c index f311551d9a0..46170a9a722 100644 --- a/arch/sh/kernel/signal_32.c +++ b/arch/sh/kernel/signal_32.c @@ -33,6 +33,11 @@ #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) +struct fdpic_func_descriptor { + unsigned long text; + unsigned long GOT; +}; + /* * Atomically swap in the new signal mask, and wait for a signal. */ @@ -378,7 +383,15 @@ static int setup_frame(int sig, struct k_sigaction *ka, regs->regs[4] = signal; /* Arg for signal handler */ regs->regs[5] = 0; regs->regs[6] = (unsigned long) &frame->sc; - regs->pc = (unsigned long) ka->sa.sa_handler; + + if (current->personality & FDPIC_FUNCPTRS) { + struct fdpic_func_descriptor __user *funcptr = + (struct fdpic_func_descriptor __user *)ka->sa.sa_handler; + + __get_user(regs->pc, &funcptr->text); + __get_user(regs->regs[12], &funcptr->GOT); + } else + regs->pc = (unsigned long)ka->sa.sa_handler; set_fs(USER_DS); @@ -458,7 +471,15 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, regs->regs[4] = signal; /* Arg for signal handler */ regs->regs[5] = (unsigned long) &frame->info; regs->regs[6] = (unsigned long) &frame->uc; - regs->pc = (unsigned long) ka->sa.sa_handler; + + if (current->personality & FDPIC_FUNCPTRS) { + struct fdpic_func_descriptor __user *funcptr = + (struct fdpic_func_descriptor __user *)ka->sa.sa_handler; + + __get_user(regs->pc, &funcptr->text); + __get_user(regs->regs[12], &funcptr->GOT); + } else + regs->pc = (unsigned long)ka->sa.sa_handler; set_fs(USER_DS); diff --git a/fs/Kconfig.binfmt b/fs/Kconfig.binfmt index 3263084eef9..4a551af6f3f 100644 --- a/fs/Kconfig.binfmt +++ b/fs/Kconfig.binfmt @@ -30,7 +30,7 @@ config COMPAT_BINFMT_ELF config BINFMT_ELF_FDPIC bool "Kernel support for FDPIC ELF binaries" default y - depends on (FRV || BLACKFIN) + depends on (FRV || BLACKFIN || (SUPERH32 && !MMU)) help ELF FDPIC binaries are based on ELF, but allow the individual load segments of a binary to be located in memory independently of each diff --git a/include/asm-sh/elf.h b/include/asm-sh/elf.h index 05092da1aa5..f01449a8d37 100644 --- a/include/asm-sh/elf.h +++ b/include/asm-sh/elf.h @@ -1,10 +1,15 @@ #ifndef __ASM_SH_ELF_H #define __ASM_SH_ELF_H +#include #include #include #include +/* ELF header e_flags defines */ +#define EF_SH_PIC 0x100 /* -fpic */ +#define EF_SH_FDPIC 0x8000 /* -mfdpic */ + /* SH (particularly SHcompact) relocation types */ #define R_SH_NONE 0 #define R_SH_DIR32 1 @@ -43,6 +48,28 @@ #define R_SH_RELATIVE 165 #define R_SH_GOTOFF 166 #define R_SH_GOTPC 167 + +/* FDPIC relocs */ +#define R_SH_GOT20 70 +#define R_SH_GOTOFF20 71 +#define R_SH_GOTFUNCDESC 72 +#define R_SH_GOTFUNCDESC20 73 +#define R_SH_GOTOFFFUNCDESC 74 +#define R_SH_GOTOFFFUNCDESC20 75 +#define R_SH_FUNCDESC 76 +#define R_SH_FUNCDESC_VALUE 77 + +#if 0 /* XXX - later .. */ +#define R_SH_GOT20 198 +#define R_SH_GOTOFF20 199 +#define R_SH_GOTFUNCDESC 200 +#define R_SH_GOTFUNCDESC20 201 +#define R_SH_GOTOFFFUNCDESC 202 +#define R_SH_GOTOFFFUNCDESC20 203 +#define R_SH_FUNCDESC 204 +#define R_SH_FUNCDESC_VALUE 205 +#endif + /* SHmedia relocs */ #define R_SH_IMM_LOW16 246 #define R_SH_IMM_LOW16_PCREL 247 @@ -77,9 +104,12 @@ typedef struct user_fpu_struct elf_fpregset_t; /* * This is used to ensure we don't load something for the wrong architecture. */ -#define elf_check_arch(x) ( (x)->e_machine == EM_SH ) +#define elf_check_arch(x) ((x)->e_machine == EM_SH) +#define elf_check_fdpic(x) ((x)->e_flags & EF_SH_FDPIC) +#define elf_check_const_displacement(x) ((x)->e_flags & EF_SH_PIC) #define USE_ELF_CORE_DUMP +#define ELF_FDPIC_CORE_EFLAGS EF_SH_FDPIC #define ELF_EXEC_PAGESIZE PAGE_SIZE /* This is the location that an ET_DYN program is loaded if exec'ed. Typical @@ -136,6 +166,27 @@ typedef struct user_fpu_struct elf_fpregset_t; _r->regs[8]=0; _r->regs[9]=0; _r->regs[10]=0; _r->regs[11]=0; \ _r->regs[12]=0; _r->regs[13]=0; _r->regs[14]=0; \ _r->sr = SR_FD; } while (0) + +#define ELF_FDPIC_PLAT_INIT(_r, _exec_map_addr, _interp_map_addr, \ + _dynamic_addr) \ +do { \ + _r->regs[0] = 0; \ + _r->regs[1] = 0; \ + _r->regs[2] = 0; \ + _r->regs[3] = 0; \ + _r->regs[4] = 0; \ + _r->regs[5] = 0; \ + _r->regs[6] = 0; \ + _r->regs[7] = 0; \ + _r->regs[8] = _exec_map_addr; \ + _r->regs[9] = _interp_map_addr; \ + _r->regs[10] = _dynamic_addr; \ + _r->regs[11] = 0; \ + _r->regs[12] = 0; \ + _r->regs[13] = 0; \ + _r->regs[14] = 0; \ + _r->sr = SR_FD; \ +} while (0) #endif #define SET_PERSONALITY(ex, ibcs2) set_personality(PER_LINUX_32BIT) diff --git a/include/asm-sh/mmu.h b/include/asm-sh/mmu.h index eb0358c097d..fdcb93bc6d1 100644 --- a/include/asm-sh/mmu.h +++ b/include/asm-sh/mmu.h @@ -12,6 +12,10 @@ typedef struct { struct vm_list_struct *vmlist; unsigned long end_brk; #endif +#ifdef CONFIG_BINFMT_ELF_FDPIC + unsigned long exec_fdpic_loadmap; + unsigned long interp_fdpic_loadmap; +#endif } mm_context_t; /* diff --git a/include/asm-sh/ptrace.h b/include/asm-sh/ptrace.h index 7d36dc3bee6..643ab5a7cf3 100644 --- a/include/asm-sh/ptrace.h +++ b/include/asm-sh/ptrace.h @@ -87,6 +87,11 @@ struct pt_dspregs { unsigned long mod; }; +#define PTRACE_GETFDPIC 31 /* get the ELF fdpic loadmap address */ + +#define PTRACE_GETFDPIC_EXEC 0 /* [addr] request the executable loadmap */ +#define PTRACE_GETFDPIC_INTERP 1 /* [addr] request the interpreter loadmap */ + #define PTRACE_GETDSPREGS 55 #define PTRACE_SETDSPREGS 56 #endif -- cgit v1.2.3 From 2cd1e31859837155033b4b731de61066d5da50ab Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 19 May 2008 14:00:44 +0900 Subject: sh: Make dump_task dependent on ELF core. Currently this is only linked in for CONFIG_BINFMT_ELF, make it dependent on CONFIG_ELF_CORE, so it's both selectable there and also linked in for CONFIG_BINFMT_ELF_FDPIC. Signed-off-by: Paul Mundt --- arch/sh/kernel/Makefile_32 | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/sh/kernel/Makefile_32 b/arch/sh/kernel/Makefile_32 index 4bbdce36b92..0e6905fe9fe 100644 --- a/arch/sh/kernel/Makefile_32 +++ b/arch/sh/kernel/Makefile_32 @@ -21,7 +21,7 @@ obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o obj-$(CONFIG_CRASH_DUMP) += crash_dump.o obj-$(CONFIG_PM) += pm.o obj-$(CONFIG_STACKTRACE) += stacktrace.o -obj-$(CONFIG_BINFMT_ELF) += dump_task.o +obj-$(CONFIG_ELF_CORE) += dump_task.o obj-$(CONFIG_IO_TRAPPED) += io_trapped.o EXTRA_CFLAGS += -Werror -- cgit v1.2.3 From 3787aa112c653b34b6f901b2eaae2b62f9582569 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 19 May 2008 16:47:56 +0900 Subject: sh: RSK+ 7203 board support. This adds initial support for the RTE RSK+ SH7203 board. Signed-off-by: Paul Mundt --- arch/sh/Kconfig | 4 + arch/sh/Makefile | 1 + arch/sh/boards/renesas/rsk7203/Makefile | 1 + arch/sh/boards/renesas/rsk7203/setup.c | 126 ++++++++++++++++++++++++++++++++ arch/sh/tools/mach-types | 1 + 5 files changed, 133 insertions(+) create mode 100644 arch/sh/boards/renesas/rsk7203/Makefile create mode 100644 arch/sh/boards/renesas/rsk7203/setup.c diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 8879938f335..83495882778 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -477,6 +477,10 @@ config SH_RTS7751R2D Select RTS7751R2D if configuring for a Renesas Technology Sales SH-Graphics board. +config SH_RSK7203 + bool "RSK7203" + depends on CPU_SUBTYPE_SH7203 + config SH_SDK7780 bool "SDK7780R3" depends on CPU_SUBTYPE_SH7780 diff --git a/arch/sh/Makefile b/arch/sh/Makefile index fb7b1b15e39..c97a779c36e 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -121,6 +121,7 @@ machdir-$(CONFIG_SH_HIGHLANDER) += renesas/r7780rp machdir-$(CONFIG_SH_MIGOR) += renesas/migor machdir-$(CONFIG_SH_SDK7780) += renesas/sdk7780 machdir-$(CONFIG_SH_X3PROTO) += renesas/x3proto +machdir-$(CONFIG_SH_RSK7203) += renesas/rsk7203 machdir-$(CONFIG_SH_SH4202_MICRODEV) += superh/microdev machdir-$(CONFIG_SH_LANDISK) += landisk machdir-$(CONFIG_SH_TITAN) += titan diff --git a/arch/sh/boards/renesas/rsk7203/Makefile b/arch/sh/boards/renesas/rsk7203/Makefile new file mode 100644 index 00000000000..f663768429f --- /dev/null +++ b/arch/sh/boards/renesas/rsk7203/Makefile @@ -0,0 +1 @@ +obj-y := setup.o diff --git a/arch/sh/boards/renesas/rsk7203/setup.c b/arch/sh/boards/renesas/rsk7203/setup.c new file mode 100644 index 00000000000..0bbda04b03b --- /dev/null +++ b/arch/sh/boards/renesas/rsk7203/setup.c @@ -0,0 +1,126 @@ +/* + * Renesas Technology Europe RSK+ 7203 Support. + * + * Copyright (C) 2008 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static struct resource smc911x_resources[] = { + [0] = { + .start = 0x24000000, + .end = 0x24000000 + 0x100, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 64, + .end = 64, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device smc911x_device = { + .name = "smc911x", + .id = -1, + .num_resources = ARRAY_SIZE(smc911x_resources), + .resource = smc911x_resources, +}; + +static const char *probes[] = { "cmdlinepart", NULL }; + +static struct mtd_partition *parsed_partitions; + +static struct mtd_partition rsk7203_partitions[] = { + { + .name = "Bootloader", + .offset = 0x00000000, + .size = 0x00040000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "Kernel", + .offset = MTDPART_OFS_NXTBLK, + .size = 0x001c0000, + }, { + .name = "Flash_FS", + .offset = MTDPART_OFS_NXTBLK, + .size = MTDPART_SIZ_FULL, + } +}; + +static struct physmap_flash_data flash_data = { + .width = 2, +}; + +static struct resource flash_resource = { + .start = 0x20000000, + .end = 0x20400000, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device flash_device = { + .name = "physmap-flash", + .id = -1, + .resource = &flash_resource, + .num_resources = 1, + .dev = { + .platform_data = &flash_data, + }, +}; + +static struct mtd_info *flash_mtd; + +static struct map_info rsk7203_flash_map = { + .name = "RSK+ Flash", + .size = 0x400000, + .bankwidth = 2, +}; + +static void __init set_mtd_partitions(void) +{ + int nr_parts = 0; + + simple_map_init(&rsk7203_flash_map); + flash_mtd = do_map_probe("cfi_probe", &rsk7203_flash_map); + nr_parts = parse_mtd_partitions(flash_mtd, probes, + &parsed_partitions, 0); + /* If there is no partition table, used the hard coded table */ + if (nr_parts <= 0) { + flash_data.parts = rsk7203_partitions; + flash_data.nr_parts = ARRAY_SIZE(rsk7203_partitions); + } else { + flash_data.nr_parts = nr_parts; + flash_data.parts = parsed_partitions; + } +} + + +static struct platform_device *rsk7203_devices[] __initdata = { + &smc911x_device, + &flash_device, +}; + +static int __init rsk7203_devices_setup(void) +{ + set_mtd_partitions(); + return platform_add_devices(rsk7203_devices, + ARRAY_SIZE(rsk7203_devices)); +} +device_initcall(rsk7203_devices_setup); + +/* + * The Machine Vector + */ +static struct sh_machine_vector mv_rsk7203 __initmv = { + .mv_name = "RSK+7203", +}; diff --git a/arch/sh/tools/mach-types b/arch/sh/tools/mach-types index 1bba7d36be9..1ae9fefed0f 100644 --- a/arch/sh/tools/mach-types +++ b/arch/sh/tools/mach-types @@ -46,3 +46,4 @@ R2D_1 RTS7751R2D_1 CAYMAN SH_CAYMAN SDK7780 SH_SDK7780 MIGOR SH_MIGOR +RSK7203 SH_RSK7203 -- cgit v1.2.3 From 02f7e627f9248a478cf790112a07ae2c612b895a Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 3 Jun 2008 18:48:54 +0900 Subject: sh: Consolidate segment modifiers across mmu/nommu systems. This moves get_fs/set_fs() and friends in to asm/segment.h. The mm_segment_t definition is likewise consolidated from the _32/_64 split. This is prepatory groundwork for using the generic address space limit and verification routines across mmu/nommu configs. Signed-off-by: Paul Mundt --- include/asm-sh/processor.h | 1 + include/asm-sh/processor_32.h | 4 ---- include/asm-sh/processor_64.h | 4 ---- include/asm-sh/segment.h | 30 +++++++++++++++++++++++++++++- include/asm-sh/uaccess_32.h | 33 +++------------------------------ 5 files changed, 33 insertions(+), 39 deletions(-) diff --git a/include/asm-sh/processor.h b/include/asm-sh/processor.h index b7c7ce80f03..15d9f92ca38 100644 --- a/include/asm-sh/processor.h +++ b/include/asm-sh/processor.h @@ -2,6 +2,7 @@ #define __ASM_SH_PROCESSOR_H #include +#include #ifndef __ASSEMBLY__ /* diff --git a/include/asm-sh/processor_32.h b/include/asm-sh/processor_32.h index c09305d6a9d..81628f144fa 100644 --- a/include/asm-sh/processor_32.h +++ b/include/asm-sh/processor_32.h @@ -113,10 +113,6 @@ struct thread_struct { union sh_fpu_union fpu; }; -typedef struct { - unsigned long seg; -} mm_segment_t; - /* Count of active tasks with UBC settings */ extern int ubc_usercnt; diff --git a/include/asm-sh/processor_64.h b/include/asm-sh/processor_64.h index 88a2edf8fa5..fc7fc685ba2 100644 --- a/include/asm-sh/processor_64.h +++ b/include/asm-sh/processor_64.h @@ -166,10 +166,6 @@ struct thread_struct { union sh_fpu_union fpu; }; -typedef struct { - unsigned long seg; -} mm_segment_t; - #define INIT_MMAP \ { &init_mm, 0, 0, NULL, PAGE_SHARED, VM_READ | VM_WRITE | VM_EXEC, 1, NULL, NULL } diff --git a/include/asm-sh/segment.h b/include/asm-sh/segment.h index e417eab4c7d..5e2725f4ac4 100644 --- a/include/asm-sh/segment.h +++ b/include/asm-sh/segment.h @@ -1,6 +1,34 @@ #ifndef __ASM_SH_SEGMENT_H #define __ASM_SH_SEGMENT_H -/* Only here because we have some old header files that expect it.. */ +#ifndef __ASSEMBLY__ +typedef struct { + unsigned long seg; +} mm_segment_t; + +#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) }) + +/* + * The fs value determines whether argument validity checking should be + * performed or not. If get_fs() == USER_DS, checking is performed, with + * get_fs() == KERNEL_DS, checking is bypassed. + * + * For historical reasons, these macros are grossly misnamed. + */ +#define KERNEL_DS MAKE_MM_SEG(0xFFFFFFFFUL) +#ifdef CONFIG_MMU +#define USER_DS MAKE_MM_SEG(PAGE_OFFSET) +#else +#define USER_DS KERNEL_DS +#endif + +#define segment_eq(a,b) ((a).seg == (b).seg) + +#define get_ds() (KERNEL_DS) + +#define get_fs() (current_thread_info()->addr_limit) +#define set_fs(x) (current_thread_info()->addr_limit = (x)) + +#endif /* __ASSEMBLY__ */ #endif /* __ASM_SH_SEGMENT_H */ diff --git a/include/asm-sh/uaccess_32.h b/include/asm-sh/uaccess_32.h index 1e41fda74bd..0795ee5919d 100644 --- a/include/asm-sh/uaccess_32.h +++ b/include/asm-sh/uaccess_32.h @@ -1,9 +1,8 @@ -/* $Id: uaccess.h,v 1.11 2003/10/13 07:21:20 lethal Exp $ - * +/* * User space memory access functions * * Copyright (C) 1999, 2002 Niibe Yutaka - * Copyright (C) 2003 Paul Mundt + * Copyright (C) 2003 - 2008 Paul Mundt * * Based on: * MIPS implementation version 1.15 by @@ -15,40 +14,16 @@ #include #include +#include #define VERIFY_READ 0 #define VERIFY_WRITE 1 -/* - * The fs value determines whether argument validity checking should be - * performed or not. If get_fs() == USER_DS, checking is performed, with - * get_fs() == KERNEL_DS, checking is bypassed. - * - * For historical reasons (Data Segment Register?), these macros are misnamed. - */ - -#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) }) - -#define KERNEL_DS MAKE_MM_SEG(0xFFFFFFFFUL) -#define USER_DS MAKE_MM_SEG(PAGE_OFFSET) - -#define segment_eq(a,b) ((a).seg == (b).seg) - -#define get_ds() (KERNEL_DS) #if !defined(CONFIG_MMU) /* NOMMU is always true */ #define __addr_ok(addr) (1) -static inline mm_segment_t get_fs(void) -{ - return USER_DS; -} - -static inline void set_fs(mm_segment_t s) -{ -} - /* * __access_ok: Check if address with size is OK or not. * @@ -64,8 +39,6 @@ static inline int __access_ok(unsigned long addr, unsigned long size) #define __addr_ok(addr) \ ((unsigned long)(addr) < (current_thread_info()->addr_limit.seg)) -#define get_fs() (current_thread_info()->addr_limit) -#define set_fs(x) (current_thread_info()->addr_limit = (x)) /* * __access_ok: Check if address with size is OK or not. -- cgit v1.2.3 From 74fcc77982e703fe85d8bd5437130fd94c61daee Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 3 Jun 2008 18:52:11 +0900 Subject: sh: Support variable page sizes on nommu. PAGE_SIZE doesn't need to be fixed at 4096 on nommu, so stub in a !MMU case for the various PAGE_SIZE Kconfig options. Signed-off-by: Paul Mundt --- arch/sh/mm/Kconfig | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig index 5fd218430b1..5267c434d6e 100644 --- a/arch/sh/mm/Kconfig +++ b/arch/sh/mm/Kconfig @@ -145,19 +145,19 @@ choice config PAGE_SIZE_4KB bool "4kB" - depends on !X2TLB + depends on !MMU || !X2TLB help This is the default page size used by all SuperH CPUs. config PAGE_SIZE_8KB bool "8kB" - depends on X2TLB + depends on !MMU || X2TLB help This enables 8kB pages as supported by SH-X2 and later MMUs. config PAGE_SIZE_64KB bool "64kB" - depends on CPU_SH4 || CPU_SH5 + depends on !MMU || CPU_SH4 || CPU_SH5 help This enables support for 64kB pages, possible on all SH-4 CPUs and later. -- cgit v1.2.3 From 66dfe18114839a7297f56f43f03125f4121de79b Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 3 Jun 2008 18:54:02 +0900 Subject: sh: Add support for 16kB PAGE_SIZE. 16kB is a useful size on nommu, while 64kB still tends to be too big to be useful. Newer MMUs are likely to support this as well, so plug it in in anticipation of those, too. Signed-off-by: Paul Mundt --- arch/sh/mm/Kconfig | 6 ++++++ include/asm-sh/page.h | 2 ++ include/asm-sh/pgtable_32.h | 4 +++- include/asm-sh/thread_info.h | 2 ++ 4 files changed, 13 insertions(+), 1 deletion(-) diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig index 5267c434d6e..29d8e3c58b3 100644 --- a/arch/sh/mm/Kconfig +++ b/arch/sh/mm/Kconfig @@ -155,6 +155,12 @@ config PAGE_SIZE_8KB help This enables 8kB pages as supported by SH-X2 and later MMUs. +config PAGE_SIZE_16KB + bool "16kB" + depends on !MMU + help + This enables 16kB pages on MMU-less SH systems. + config PAGE_SIZE_64KB bool "64kB" depends on !MMU || CPU_SH4 || CPU_SH5 diff --git a/include/asm-sh/page.h b/include/asm-sh/page.h index 5dc01d2fcc4..77fb8bf02e4 100644 --- a/include/asm-sh/page.h +++ b/include/asm-sh/page.h @@ -12,6 +12,8 @@ # define PAGE_SHIFT 12 #elif defined(CONFIG_PAGE_SIZE_8KB) # define PAGE_SHIFT 13 +#elif defined(CONFIG_PAGE_SIZE_16KB) +# define PAGE_SHIFT 14 #elif defined(CONFIG_PAGE_SIZE_64KB) # define PAGE_SHIFT 16 #else diff --git a/include/asm-sh/pgtable_32.h b/include/asm-sh/pgtable_32.h index cbc731d35c2..72ea209195b 100644 --- a/include/asm-sh/pgtable_32.h +++ b/include/asm-sh/pgtable_32.h @@ -102,7 +102,9 @@ #define _PAGE_FLAGS_HARDWARE_MASK (PHYS_ADDR_MASK & ~(_PAGE_CLEAR_FLAGS)) /* Hardware flags, page size encoding */ -#if defined(CONFIG_X2TLB) +#if !defined(CONFIG_MMU) +# define _PAGE_FLAGS_HARD 0ULL +#elif defined(CONFIG_X2TLB) # if defined(CONFIG_PAGE_SIZE_4KB) # define _PAGE_FLAGS_HARD _PAGE_EXT(_PAGE_EXT_ESZ0) # elif defined(CONFIG_PAGE_SIZE_8KB) diff --git a/include/asm-sh/thread_info.h b/include/asm-sh/thread_info.h index 5131e390752..eeb4c747119 100644 --- a/include/asm-sh/thread_info.h +++ b/include/asm-sh/thread_info.h @@ -38,6 +38,8 @@ struct thread_info { #define THREAD_SIZE_ORDER (1) #elif defined(CONFIG_PAGE_SIZE_8KB) #define THREAD_SIZE_ORDER (1) +#elif defined(CONFIG_PAGE_SIZE_16KB) +#define THREAD_SIZE_ORDER (0) #elif defined(CONFIG_PAGE_SIZE_64KB) #define THREAD_SIZE_ORDER (0) #else -- cgit v1.2.3 From 85247285ea6f6e2087193b2a720404690e9cb1b3 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 3 Jun 2008 19:37:35 +0900 Subject: sh: Use the common segment definitions for the _64 uaccess routines. Signed-off-by: Paul Mundt --- include/asm-sh/uaccess_64.h | 19 ------------------- 1 file changed, 19 deletions(-) diff --git a/include/asm-sh/uaccess_64.h b/include/asm-sh/uaccess_64.h index a9b68d09484..5833754dc74 100644 --- a/include/asm-sh/uaccess_64.h +++ b/include/asm-sh/uaccess_64.h @@ -26,25 +26,6 @@ #define VERIFY_READ 0 #define VERIFY_WRITE 1 -/* - * The fs value determines whether argument validity checking should be - * performed or not. If get_fs() == USER_DS, checking is performed, with - * get_fs() == KERNEL_DS, checking is bypassed. - * - * For historical reasons (Data Segment Register?), these macros are misnamed. - */ - -#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) }) - -#define KERNEL_DS MAKE_MM_SEG(0xFFFFFFFF) -#define USER_DS MAKE_MM_SEG(0x80000000) - -#define get_ds() (KERNEL_DS) -#define get_fs() (current_thread_info()->addr_limit) -#define set_fs(x) (current_thread_info()->addr_limit=(x)) - -#define segment_eq(a,b) ((a).seg == (b).seg) - #define __addr_ok(addr) ((unsigned long)(addr) < (current_thread_info()->addr_limit.seg)) /* -- cgit v1.2.3 From 31f6a11fe764dc580b645d7aa878854fa9e85a06 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 3 Jun 2008 19:38:22 +0900 Subject: sh: Consolidate addr/access_ok across mmu/nommu on 32bit. Signed-off-by: Paul Mundt --- include/asm-sh/uaccess_32.h | 39 +++------------------------------------ 1 file changed, 3 insertions(+), 36 deletions(-) diff --git a/include/asm-sh/uaccess_32.h b/include/asm-sh/uaccess_32.h index 0795ee5919d..44abd168232 100644 --- a/include/asm-sh/uaccess_32.h +++ b/include/asm-sh/uaccess_32.h @@ -19,26 +19,8 @@ #define VERIFY_READ 0 #define VERIFY_WRITE 1 - -#if !defined(CONFIG_MMU) -/* NOMMU is always true */ -#define __addr_ok(addr) (1) - -/* - * __access_ok: Check if address with size is OK or not. - * - * If we don't have an MMU (or if its disabled) the only thing we really have - * to look out for is if the address resides somewhere outside of what - * available RAM we have. - */ -static inline int __access_ok(unsigned long addr, unsigned long size) -{ - return 1; -} -#else /* CONFIG_MMU */ #define __addr_ok(addr) \ - ((unsigned long)(addr) < (current_thread_info()->addr_limit.seg)) - + ((unsigned long __force)(addr) < current_thread_info()->addr_limit.seg) /* * __access_ok: Check if address with size is OK or not. @@ -48,23 +30,8 @@ static inline int __access_ok(unsigned long addr, unsigned long size) * sum := addr + size; carry? --> flag = true; * if (sum >= addr_limit) flag = true; */ -static inline int __access_ok(unsigned long addr, unsigned long size) -{ - unsigned long flag, sum; - - __asm__("clrt\n\t" - "addc %3, %1\n\t" - "movt %0\n\t" - "cmp/hi %4, %1\n\t" - "rotcl %0" - :"=&r" (flag), "=r" (sum) - :"1" (addr), "r" (size), - "r" (current_thread_info()->addr_limit.seg) - :"t"); - return flag == 0; -} -#endif /* CONFIG_MMU */ - +#define __access_ok(addr, size) \ + (__addr_ok((addr) + (size))) #define access_ok(type, addr, size) \ (__chk_user_ptr(addr), \ __access_ok((unsigned long __force)(addr), (size))) -- cgit v1.2.3 From 42fd3b142d8867f5b58d6fb75592cd20fd654c1b Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 3 Jun 2008 20:05:39 +0900 Subject: sh: Initial consolidation of the _32/_64 uaccess split. This consolidates everything but the bare assembly routines, which we will sync up in a follow-up patch. Signed-off-by: Paul Mundt --- include/asm-sh/uaccess.h | 222 +++++++++++++++++++++++++++++++++++ include/asm-sh/uaccess_32.h | 277 ++++++++------------------------------------ include/asm-sh/uaccess_64.h | 187 ------------------------------ 3 files changed, 270 insertions(+), 416 deletions(-) diff --git a/include/asm-sh/uaccess.h b/include/asm-sh/uaccess.h index b3440c305b5..45c2c9b2993 100644 --- a/include/asm-sh/uaccess.h +++ b/include/asm-sh/uaccess.h @@ -1,12 +1,171 @@ #ifndef __ASM_SH_UACCESS_H #define __ASM_SH_UACCESS_H +#include +#include +#include + +#define VERIFY_READ 0 +#define VERIFY_WRITE 1 + +#define __addr_ok(addr) \ + ((unsigned long __force)(addr) < current_thread_info()->addr_limit.seg) + +/* + * __access_ok: Check if address with size is OK or not. + * + * Uhhuh, this needs 33-bit arithmetic. We have a carry.. + * + * sum := addr + size; carry? --> flag = true; + * if (sum >= addr_limit) flag = true; + */ +#define __access_ok(addr, size) \ + (__addr_ok((addr) + (size))) +#define access_ok(type, addr, size) \ + (__chk_user_ptr(addr), \ + __access_ok((unsigned long __force)(addr), (size))) + +/* + * Uh, these should become the main single-value transfer routines ... + * They automatically use the right size if we just have the right + * pointer type ... + * + * As SuperH uses the same address space for kernel and user data, we + * can just do these as direct assignments. + * + * Careful to not + * (a) re-use the arguments for side effects (sizeof is ok) + * (b) require any knowledge of processes at this stage + */ +#define put_user(x,ptr) __put_user_check((x), (ptr), sizeof(*(ptr))) +#define get_user(x,ptr) __get_user_check((x), (ptr), sizeof(*(ptr))) + +/* + * The "__xxx" versions do not do address space checking, useful when + * doing multiple accesses to the same area (the user has to do the + * checks by hand with "access_ok()") + */ +#define __put_user(x,ptr) __put_user_nocheck((x), (ptr), sizeof(*(ptr))) +#define __get_user(x,ptr) __get_user_nocheck((x), (ptr), sizeof(*(ptr))) + +struct __large_struct { unsigned long buf[100]; }; +#define __m(x) (*(struct __large_struct __user *)(x)) + +#define __get_user_nocheck(x,ptr,size) \ +({ \ + long __gu_err; \ + unsigned long __gu_val; \ + const __typeof__(*(ptr)) __user *__gu_addr = (ptr); \ + __chk_user_ptr(ptr); \ + __get_user_size(__gu_val, __gu_addr, (size), __gu_err); \ + (x) = (__typeof__(*(ptr)))__gu_val; \ + __gu_err; \ +}) + +#define __get_user_check(x,ptr,size) \ +({ \ + long __gu_err = -EFAULT; \ + unsigned long __gu_val = 0; \ + const __typeof__(*(ptr)) *__gu_addr = (ptr); \ + if (likely(access_ok(VERIFY_READ, __gu_addr, (size)))) \ + __get_user_size(__gu_val, __gu_addr, (size), __gu_err); \ + (x) = (__typeof__(*(ptr)))__gu_val; \ + __gu_err; \ +}) + +#define __put_user_nocheck(x,ptr,size) \ +({ \ + long __pu_err; \ + __typeof__(*(ptr)) __user *__pu_addr = (ptr); \ + __chk_user_ptr(ptr); \ + __put_user_size((x), __pu_addr, (size), __pu_err); \ + __pu_err; \ +}) + +#define __put_user_check(x,ptr,size) \ +({ \ + long __pu_err = -EFAULT; \ + __typeof__(*(ptr)) __user *__pu_addr = (ptr); \ + if (likely(access_ok(VERIFY_WRITE, __pu_addr, size))) \ + __put_user_size((x), __pu_addr, (size), \ + __pu_err); \ + __pu_err; \ +}) + #ifdef CONFIG_SUPERH32 # include "uaccess_32.h" #else # include "uaccess_64.h" #endif +/* Generic arbitrary sized copy. */ +/* Return the number of bytes NOT copied */ +__kernel_size_t __copy_user(void *to, const void *from, __kernel_size_t n); + +static __always_inline unsigned long +__copy_from_user(void *to, const void __user *from, unsigned long n) +{ + return __copy_user(to, (__force void *)from, n); +} + +static __always_inline unsigned long __must_check +__copy_to_user(void __user *to, const void *from, unsigned long n) +{ + return __copy_user((__force void *)to, from, n); +} + +#define __copy_to_user_inatomic __copy_to_user +#define __copy_from_user_inatomic __copy_from_user + +/* + * Clear the area and return remaining number of bytes + * (on failure. Usually it's 0.) + */ +__kernel_size_t __clear_user(void *addr, __kernel_size_t size); + +#define clear_user(addr,n) \ +({ \ + void __user * __cl_addr = (addr); \ + unsigned long __cl_size = (n); \ + \ + if (__cl_size && access_ok(VERIFY_WRITE, \ + ((unsigned long)(__cl_addr)), __cl_size)) \ + __cl_size = __clear_user(__cl_addr, __cl_size); \ + \ + __cl_size; \ +}) + +/** + * strncpy_from_user: - Copy a NUL terminated string from userspace. + * @dst: Destination address, in kernel space. This buffer must be at + * least @count bytes long. + * @src: Source address, in user space. + * @count: Maximum number of bytes to copy, including the trailing NUL. + * + * Copies a NUL-terminated string from userspace to kernel space. + * + * On success, returns the length of the string (not including the trailing + * NUL). + * + * If access to userspace fails, returns -EFAULT (some data may have been + * copied). + * + * If @count is smaller than the length of the string, copies @count bytes + * and returns @count. + */ +#define strncpy_from_user(dest,src,count) \ +({ \ + unsigned long __sfu_src = (unsigned long)(src); \ + int __sfu_count = (int)(count); \ + long __sfu_res = -EFAULT; \ + \ + if (__access_ok(__sfu_src, __sfu_count)) \ + __sfu_res = __strncpy_from_user((unsigned long)(dest), \ + __sfu_src, __sfu_count); \ + \ + __sfu_res; \ +}) + static inline unsigned long copy_from_user(void *to, const void __user *from, unsigned long n) { @@ -31,4 +190,67 @@ copy_to_user(void __user *to, const void *from, unsigned long n) return __copy_size; } +/** + * strnlen_user: - Get the size of a string in user space. + * @s: The string to measure. + * @n: The maximum valid length + * + * Context: User context only. This function may sleep. + * + * Get the size of a NUL-terminated string in user space. + * + * Returns the size of the string INCLUDING the terminating NUL. + * On exception, returns 0. + * If the string is too long, returns a value greater than @n. + */ +static inline long strnlen_user(const char __user *s, long n) +{ + if (!__addr_ok(s)) + return 0; + else + return __strnlen_user(s, n); +} + +/** + * strlen_user: - Get the size of a string in user space. + * @str: The string to measure. + * + * Context: User context only. This function may sleep. + * + * Get the size of a NUL-terminated string in user space. + * + * Returns the size of the string INCLUDING the terminating NUL. + * On exception, returns 0. + * + * If there is a limit on the length of a valid string, you may wish to + * consider using strnlen_user() instead. + */ +#define strlen_user(str) strnlen_user(str, ~0UL >> 1) + +/* + * The exception table consists of pairs of addresses: the first is the + * address of an instruction that is allowed to fault, and the second is + * the address at which the program should continue. No registers are + * modified, so it is entirely up to the continuation code to figure out + * what to do. + * + * All the routines below use bits of fixup code that are out of line + * with the main instruction path. This means when everything is well, + * we don't even have to jump over them. Further, they do not intrude + * on our cache or tlb entries. + */ +struct exception_table_entry { + unsigned long insn, fixup; +}; + +#if defined(CONFIG_SUPERH64) && defined(CONFIG_MMU) +#define ARCH_HAS_SEARCH_EXTABLE +#endif + +int fixup_exception(struct pt_regs *regs); +/* Returns 0 if exception not found and fixup.unit otherwise. */ +unsigned long search_exception_table(unsigned long addr); +const struct exception_table_entry *search_exception_tables(unsigned long addr); + + #endif /* __ASM_SH_UACCESS_H */ diff --git a/include/asm-sh/uaccess_32.h b/include/asm-sh/uaccess_32.h index 44abd168232..ae0d24f6653 100644 --- a/include/asm-sh/uaccess_32.h +++ b/include/asm-sh/uaccess_32.h @@ -12,56 +12,6 @@ #ifndef __ASM_SH_UACCESS_32_H #define __ASM_SH_UACCESS_32_H -#include -#include -#include - -#define VERIFY_READ 0 -#define VERIFY_WRITE 1 - -#define __addr_ok(addr) \ - ((unsigned long __force)(addr) < current_thread_info()->addr_limit.seg) - -/* - * __access_ok: Check if address with size is OK or not. - * - * Uhhuh, this needs 33-bit arithmetic. We have a carry.. - * - * sum := addr + size; carry? --> flag = true; - * if (sum >= addr_limit) flag = true; - */ -#define __access_ok(addr, size) \ - (__addr_ok((addr) + (size))) -#define access_ok(type, addr, size) \ - (__chk_user_ptr(addr), \ - __access_ok((unsigned long __force)(addr), (size))) - -/* - * Uh, these should become the main single-value transfer routines ... - * They automatically use the right size if we just have the right - * pointer type ... - * - * As SuperH uses the same address space for kernel and user data, we - * can just do these as direct assignments. - * - * Careful to not - * (a) re-use the arguments for side effects (sizeof is ok) - * (b) require any knowledge of processes at this stage - */ -#define put_user(x,ptr) __put_user_check((x), (ptr), sizeof(*(ptr))) -#define get_user(x,ptr) __get_user_check((x), (ptr), sizeof(*(ptr))) - -/* - * The "__xxx" versions do not do address space checking, useful when - * doing multiple accesses to the same area (the user has to do the - * checks by hand with "access_ok()") - */ -#define __put_user(x,ptr) __put_user_nocheck((x), (ptr), sizeof(*(ptr))) -#define __get_user(x,ptr) __get_user_nocheck((x), (ptr), sizeof(*(ptr))) - -struct __large_struct { unsigned long buf[100]; }; -#define __m(x) (*(struct __large_struct __user *)(x)) - #define __get_user_size(x,ptr,size,retval) \ do { \ retval = 0; \ @@ -81,28 +31,7 @@ do { \ } \ } while (0) -#define __get_user_nocheck(x,ptr,size) \ -({ \ - long __gu_err; \ - unsigned long __gu_val; \ - const __typeof__(*(ptr)) __user *__gu_addr = (ptr); \ - __chk_user_ptr(ptr); \ - __get_user_size(__gu_val, __gu_addr, (size), __gu_err); \ - (x) = (__typeof__(*(ptr)))__gu_val; \ - __gu_err; \ -}) - -#define __get_user_check(x,ptr,size) \ -({ \ - long __gu_err = -EFAULT; \ - unsigned long __gu_val = 0; \ - const __typeof__(*(ptr)) *__gu_addr = (ptr); \ - if (likely(access_ok(VERIFY_READ, __gu_addr, (size)))) \ - __get_user_size(__gu_val, __gu_addr, (size), __gu_err); \ - (x) = (__typeof__(*(ptr)))__gu_val; \ - __gu_err; \ -}) - +#ifdef CONFIG_MMU #define __get_user_asm(x, addr, err, insn) \ ({ \ __asm__ __volatile__( \ @@ -123,6 +52,16 @@ __asm__ __volatile__( \ ".previous" \ :"=&r" (err), "=&r" (x) \ :"m" (__m(addr)), "i" (-EFAULT), "0" (err)); }) +#else +#define __get_user_asm(x, addr, err, insn) \ +do { \ + __asm__ __volatile__ ( \ + "mov." insn " %1, %0\n\t" \ + : "=&r" (x) \ + : "m" (__m(addr)) \ + ); \ +} while (0) +#endif /* CONFIG_MMU */ extern void __get_user_unknown(void); @@ -147,45 +86,41 @@ do { \ } \ } while (0) -#define __put_user_nocheck(x,ptr,size) \ -({ \ - long __pu_err; \ - __typeof__(*(ptr)) __user *__pu_addr = (ptr); \ - __chk_user_ptr(ptr); \ - __put_user_size((x), __pu_addr, (size), __pu_err); \ - __pu_err; \ -}) - -#define __put_user_check(x,ptr,size) \ -({ \ - long __pu_err = -EFAULT; \ - __typeof__(*(ptr)) __user *__pu_addr = (ptr); \ - if (likely(access_ok(VERIFY_WRITE, __pu_addr, size))) \ - __put_user_size((x), __pu_addr, (size), \ - __pu_err); \ - __pu_err; \ -}) - -#define __put_user_asm(x, addr, err, insn) \ -({ \ -__asm__ __volatile__( \ - "1:\n\t" \ - "mov." insn " %1, %2\n\t" \ - "2:\n" \ - ".section .fixup,\"ax\"\n" \ - "3:\n\t" \ - "mov.l 4f, %0\n\t" \ - "jmp @%0\n\t" \ - " mov %3, %0\n\t" \ - ".balign 4\n" \ - "4: .long 2b\n\t" \ - ".previous\n" \ - ".section __ex_table,\"a\"\n\t" \ - ".long 1b, 3b\n\t" \ - ".previous" \ - :"=&r" (err) \ - :"r" (x), "m" (__m(addr)), "i" (-EFAULT), "0" (err) \ - :"memory"); }) +#ifdef CONFIG_MMU +#define __put_user_asm(x, addr, err, insn) \ +do { \ + __asm__ __volatile__ ( \ + "1:\n\t" \ + "mov." insn " %1, %2\n\t" \ + "2:\n" \ + ".section .fixup,\"ax\"\n" \ + "3:\n\t" \ + "mov.l 4f, %0\n\t" \ + "jmp @%0\n\t" \ + " mov %3, %0\n\t" \ + ".balign 4\n" \ + "4: .long 2b\n\t" \ + ".previous\n" \ + ".section __ex_table,\"a\"\n\t" \ + ".long 1b, 3b\n\t" \ + ".previous" \ + : "=&r" (err) \ + : "r" (x), "m" (__m(addr)), "i" (-EFAULT), \ + "0" (err) \ + : "memory" \ + ); \ +} while (0) +#else +#define __put_user_asm(x, addr, err, insn) \ +do { \ + __asm__ __volatile__ ( \ + "mov." insn " %0, %1\n\t" \ + : /* no outputs */ \ + : "r" (x), "m" (__m(addr)) \ + : "memory" \ + ); \ +} while (0) +#endif /* CONFIG_MMU */ #if defined(CONFIG_CPU_LITTLE_ENDIAN) #define __put_user_u64(val,addr,retval) \ @@ -235,40 +170,7 @@ __asm__ __volatile__( \ extern void __put_user_unknown(void); -/* Generic arbitrary sized copy. */ -/* Return the number of bytes NOT copied */ -__kernel_size_t __copy_user(void *to, const void *from, __kernel_size_t n); - - -static __always_inline unsigned long -__copy_from_user(void *to, const void __user *from, unsigned long n) -{ - return __copy_user(to, (__force void *)from, n); -} - -static __always_inline unsigned long __must_check -__copy_to_user(void __user *to, const void *from, unsigned long n) -{ - return __copy_user((__force void *)to, from, n); -} - -#define __copy_to_user_inatomic __copy_to_user -#define __copy_from_user_inatomic __copy_from_user - -/* - * Clear the area and return remaining number of bytes - * (on failure. Usually it's 0.) - */ -extern __kernel_size_t __clear_user(void *addr, __kernel_size_t size); - -#define clear_user(addr,n) ({ \ -void * __cl_addr = (addr); \ -unsigned long __cl_size = (n); \ -if (__cl_size && __access_ok(((unsigned long)(__cl_addr)), __cl_size)) \ -__cl_size = __clear_user(__cl_addr, __cl_size); \ -__cl_size; }) - -static __inline__ int +static inline int __strncpy_from_user(unsigned long __dest, unsigned long __user __src, int __count) { __kernel_size_t res; @@ -307,37 +209,11 @@ __strncpy_from_user(unsigned long __dest, unsigned long __user __src, int __coun return res; } -/** - * strncpy_from_user: - Copy a NUL terminated string from userspace. - * @dst: Destination address, in kernel space. This buffer must be at - * least @count bytes long. - * @src: Source address, in user space. - * @count: Maximum number of bytes to copy, including the trailing NUL. - * - * Copies a NUL-terminated string from userspace to kernel space. - * - * On success, returns the length of the string (not including the trailing - * NUL). - * - * If access to userspace fails, returns -EFAULT (some data may have been - * copied). - * - * If @count is smaller than the length of the string, copies @count bytes - * and returns @count. - */ -#define strncpy_from_user(dest,src,count) ({ \ -unsigned long __sfu_src = (unsigned long) (src); \ -int __sfu_count = (int) (count); \ -long __sfu_res = -EFAULT; \ -if(__access_ok(__sfu_src, __sfu_count)) { \ -__sfu_res = __strncpy_from_user((unsigned long) (dest), __sfu_src, __sfu_count); \ -} __sfu_res; }) - /* * Return the size of a string (including the ending 0 even when we have * exceeded the maximum string length). */ -static __inline__ long __strnlen_user(const char __user *__s, long __n) +static inline long __strnlen_user(const char __user *__s, long __n) { unsigned long res; unsigned long __dummy; @@ -369,61 +245,4 @@ static __inline__ long __strnlen_user(const char __user *__s, long __n) return res; } -/** - * strnlen_user: - Get the size of a string in user space. - * @s: The string to measure. - * @n: The maximum valid length - * - * Context: User context only. This function may sleep. - * - * Get the size of a NUL-terminated string in user space. - * - * Returns the size of the string INCLUDING the terminating NUL. - * On exception, returns 0. - * If the string is too long, returns a value greater than @n. - */ -static __inline__ long strnlen_user(const char __user *s, long n) -{ - if (!__addr_ok(s)) - return 0; - else - return __strnlen_user(s, n); -} - -/** - * strlen_user: - Get the size of a string in user space. - * @str: The string to measure. - * - * Context: User context only. This function may sleep. - * - * Get the size of a NUL-terminated string in user space. - * - * Returns the size of the string INCLUDING the terminating NUL. - * On exception, returns 0. - * - * If there is a limit on the length of a valid string, you may wish to - * consider using strnlen_user() instead. - */ -#define strlen_user(str) strnlen_user(str, ~0UL >> 1) - -/* - * The exception table consists of pairs of addresses: the first is the - * address of an instruction that is allowed to fault, and the second is - * the address at which the program should continue. No registers are - * modified, so it is entirely up to the continuation code to figure out - * what to do. - * - * All the routines below use bits of fixup code that are out of line - * with the main instruction path. This means when everything is well, - * we don't even have to jump over them. Further, they do not intrude - * on our cache or tlb entries. - */ - -struct exception_table_entry -{ - unsigned long insn, fixup; -}; - -extern int fixup_exception(struct pt_regs *regs); - #endif /* __ASM_SH_UACCESS_32_H */ diff --git a/include/asm-sh/uaccess_64.h b/include/asm-sh/uaccess_64.h index 5833754dc74..81b3d515fcb 100644 --- a/include/asm-sh/uaccess_64.h +++ b/include/asm-sh/uaccess_64.h @@ -20,68 +20,6 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. */ -#include -#include - -#define VERIFY_READ 0 -#define VERIFY_WRITE 1 - -#define __addr_ok(addr) ((unsigned long)(addr) < (current_thread_info()->addr_limit.seg)) - -/* - * Uhhuh, this needs 33-bit arithmetic. We have a carry.. - * - * sum := addr + size; carry? --> flag = true; - * if (sum >= addr_limit) flag = true; - */ -#define __range_ok(addr,size) (((unsigned long) (addr) + (size) < (current_thread_info()->addr_limit.seg)) ? 0 : 1) - -#define access_ok(type,addr,size) (__range_ok(addr,size) == 0) -#define __access_ok(addr,size) (__range_ok(addr,size) == 0) - -/* - * Uh, these should become the main single-value transfer routines ... - * They automatically use the right size if we just have the right - * pointer type ... - * - * As MIPS uses the same address space for kernel and user data, we - * can just do these as direct assignments. - * - * Careful to not - * (a) re-use the arguments for side effects (sizeof is ok) - * (b) require any knowledge of processes at this stage - */ -#define put_user(x,ptr) __put_user_check((x),(ptr),sizeof(*(ptr))) -#define get_user(x,ptr) __get_user_check((x),(ptr),sizeof(*(ptr))) - -/* - * The "__xxx" versions do not do address space checking, useful when - * doing multiple accesses to the same area (the user has to do the - * checks by hand with "access_ok()") - */ -#define __put_user(x,ptr) __put_user_nocheck((x),(ptr),sizeof(*(ptr))) -#define __get_user(x,ptr) __get_user_nocheck((x),(ptr),sizeof(*(ptr))) - -/* - * The "xxx_ret" versions return constant specified in third argument, if - * something bad happens. These macros can be optimized for the - * case of just returning from the function xxx_ret is used. - */ - -#define put_user_ret(x,ptr,ret) ({ \ -if (put_user(x,ptr)) return ret; }) - -#define get_user_ret(x,ptr,ret) ({ \ -if (get_user(x,ptr)) return ret; }) - -#define __put_user_ret(x,ptr,ret) ({ \ -if (__put_user(x,ptr)) return ret; }) - -#define __get_user_ret(x,ptr,ret) ({ \ -if (__get_user(x,ptr)) return ret; }) - -struct __large_struct { unsigned long buf[100]; }; -#define __m(x) (*(struct __large_struct *)(x)) #define __get_user_size(x,ptr,size,retval) \ do { \ @@ -105,26 +43,6 @@ do { \ } \ } while (0) -#define __get_user_nocheck(x,ptr,size) \ -({ \ - long __gu_err, __gu_val; \ - __get_user_size((void *)&__gu_val, (long)(ptr), \ - (size), __gu_err); \ - (x) = (__typeof__(*(ptr)))__gu_val; \ - __gu_err; \ -}) - -#define __get_user_check(x,ptr,size) \ -({ \ - long __gu_addr = (long)(ptr); \ - long __gu_err = -EFAULT, __gu_val; \ - if (__access_ok(__gu_addr, (size))) \ - __get_user_size((void *)&__gu_val, __gu_addr, \ - (size), __gu_err); \ - (x) = (__typeof__(*(ptr))) __gu_val; \ - __gu_err; \ -}) - extern long __get_user_asm_b(void *, long); extern long __get_user_asm_w(void *, long); extern long __get_user_asm_l(void *, long); @@ -152,115 +70,10 @@ do { \ } \ } while (0) -#define __put_user_nocheck(x,ptr,size) \ -({ \ - long __pu_err; \ - __typeof__(*(ptr)) __pu_val = (x); \ - __put_user_size((void *)&__pu_val, (long)(ptr), (size), __pu_err); \ - __pu_err; \ -}) - -#define __put_user_check(x,ptr,size) \ -({ \ - long __pu_err = -EFAULT; \ - long __pu_addr = (long)(ptr); \ - __typeof__(*(ptr)) __pu_val = (x); \ - \ - if (__access_ok(__pu_addr, (size))) \ - __put_user_size((void *)&__pu_val, __pu_addr, (size), __pu_err);\ - __pu_err; \ -}) - extern long __put_user_asm_b(void *, long); extern long __put_user_asm_w(void *, long); extern long __put_user_asm_l(void *, long); extern long __put_user_asm_q(void *, long); extern void __put_user_unknown(void); - -/* Generic arbitrary sized copy. */ -/* Return the number of bytes NOT copied */ -/* XXX: should be such that: 4byte and the rest. */ -extern __kernel_size_t __copy_user(void *__to, const void *__from, __kernel_size_t __n); - -#define copy_to_user_ret(to,from,n,retval) ({ \ -if (copy_to_user(to,from,n)) \ - return retval; \ -}) - -#define __copy_to_user(to,from,n) \ - __copy_user((void *)(to), \ - (void *)(from), n) - -#define __copy_to_user_ret(to,from,n,retval) ({ \ -if (__copy_to_user(to,from,n)) \ - return retval; \ -}) - -#define copy_from_user_ret(to,from,n,retval) ({ \ -if (copy_from_user(to,from,n)) \ - return retval; \ -}) - -#define __copy_from_user(to,from,n) \ - __copy_user((void *)(to), \ - (void *)(from), n) - -#define __copy_from_user_ret(to,from,n,retval) ({ \ -if (__copy_from_user(to,from,n)) \ - return retval; \ -}) - -#define __copy_to_user_inatomic __copy_to_user -#define __copy_from_user_inatomic __copy_from_user - -/* XXX: Not sure it works well.. - should be such that: 4byte clear and the rest. */ -extern __kernel_size_t __clear_user(void *addr, __kernel_size_t size); - -#define clear_user(addr,n) ({ \ -void * __cl_addr = (addr); \ -unsigned long __cl_size = (n); \ -if (__cl_size && __access_ok(((unsigned long)(__cl_addr)), __cl_size)) \ -__cl_size = __clear_user(__cl_addr, __cl_size); \ -__cl_size; }) - -extern int __strncpy_from_user(unsigned long __dest, unsigned long __src, int __count); - -#define strncpy_from_user(dest,src,count) ({ \ -unsigned long __sfu_src = (unsigned long) (src); \ -int __sfu_count = (int) (count); \ -long __sfu_res = -EFAULT; \ -if(__access_ok(__sfu_src, __sfu_count)) { \ -__sfu_res = __strncpy_from_user((unsigned long) (dest), __sfu_src, __sfu_count); \ -} __sfu_res; }) - -#define strlen_user(str) strnlen_user(str, ~0UL >> 1) - -/* - * Return the size of a string (including the ending 0!) - */ -extern long __strnlen_user(const char *__s, long __n); - -static inline long strnlen_user(const char *s, long n) -{ - if (!__addr_ok(s)) - return 0; - else - return __strnlen_user(s, n); -} - -struct exception_table_entry -{ - unsigned long insn, fixup; -}; - -#ifdef CONFIG_MMU -#define ARCH_HAS_SEARCH_EXTABLE -#endif - -/* Returns 0 if exception not found and fixup.unit otherwise. */ -extern unsigned long search_exception_table(unsigned long addr); -extern const struct exception_table_entry *search_exception_tables (unsigned long addr); - #endif /* __ASM_SH_UACCESS_64_H */ -- cgit v1.2.3 From 04e917b606ffe6ec10fb75c21447162cba31f6b6 Mon Sep 17 00:00:00 2001 From: Yusuke Goda Date: Fri, 6 Jun 2008 17:03:23 +0900 Subject: sh: Add support Renesas Solutions AP-325RXA board This board is SH7723 base board. This has SCIF, LCDC, USB Host controler, NOR/NAND Flash, Sound, Ether and other. This patch supports SCIF, NOR Flash. Signed-off-by: Yusuke Goda Signed-off-by: Paul Mundt --- arch/sh/Kconfig | 7 + arch/sh/Makefile | 1 + arch/sh/boards/renesas/ap325rxa/Makefile | 1 + arch/sh/boards/renesas/ap325rxa/setup.c | 108 ++++ arch/sh/configs/ap325rxa_defconfig | 947 +++++++++++++++++++++++++++++++ arch/sh/tools/mach-types | 1 + 6 files changed, 1065 insertions(+) create mode 100644 arch/sh/boards/renesas/ap325rxa/Makefile create mode 100644 arch/sh/boards/renesas/ap325rxa/setup.c create mode 100644 arch/sh/configs/ap325rxa_defconfig diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 83495882778..ca5efe64fad 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -502,6 +502,13 @@ config SH_MIGOR Select Migo-R if configuring for the SH7722 Migo-R platform by Renesas System Solutions Asia Pte. Ltd. +config SH_AP325RXA + bool "AP-325RXA" + select CPU_SUBTYPE_SH7723 + help + Renesas "AP-325RXA" support. + Compatible with ALGO SYSTEM CO.,LTD. "AP-320A" + config SH_EDOSK7705 bool "EDOSK7705" depends on CPU_SUBTYPE_SH7705 diff --git a/arch/sh/Makefile b/arch/sh/Makefile index c97a779c36e..73182d5e810 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -122,6 +122,7 @@ machdir-$(CONFIG_SH_MIGOR) += renesas/migor machdir-$(CONFIG_SH_SDK7780) += renesas/sdk7780 machdir-$(CONFIG_SH_X3PROTO) += renesas/x3proto machdir-$(CONFIG_SH_RSK7203) += renesas/rsk7203 +machdir-$(CONFIG_SH_AP325RXA) += renesas/ap325rxa machdir-$(CONFIG_SH_SH4202_MICRODEV) += superh/microdev machdir-$(CONFIG_SH_LANDISK) += landisk machdir-$(CONFIG_SH_TITAN) += titan diff --git a/arch/sh/boards/renesas/ap325rxa/Makefile b/arch/sh/boards/renesas/ap325rxa/Makefile new file mode 100644 index 00000000000..f663768429f --- /dev/null +++ b/arch/sh/boards/renesas/ap325rxa/Makefile @@ -0,0 +1 @@ +obj-y := setup.o diff --git a/arch/sh/boards/renesas/ap325rxa/setup.c b/arch/sh/boards/renesas/ap325rxa/setup.c new file mode 100644 index 00000000000..e33340cafa0 --- /dev/null +++ b/arch/sh/boards/renesas/ap325rxa/setup.c @@ -0,0 +1,108 @@ +/* + * Renesas - AP-325RXA + * (Compatible with Algo System ., LTD. - AP-320A) + * + * Copyright (C) 2008 Renesas Solutions Corp. + * Author : Yusuke Goda + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include +#include +#include +#include +#include +#include + +static struct resource smc9118_resources[] = { + [0] = { + .start = 0xb6080000, + .end = 0xb60fffff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 35, + .end = 35, + .flags = IORESOURCE_IRQ, + } +}; + +static struct platform_device smc9118_device = { + .name = "smc911x", + .id = -1, + .num_resources = ARRAY_SIZE(smc9118_resources), + .resource = smc9118_resources, +}; + +static struct mtd_partition ap325rxa_nor_flash_partitions[] = { + { + .name = "uboot", + .offset = 0, + .size = (1 * 1024 * 1024), + .mask_flags = MTD_WRITEABLE, /* Read-only */ + }, { + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = (2 * 1024 * 1024), + }, { + .name = "other", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct physmap_flash_data ap325rxa_nor_flash_data = { + .width = 2, + .parts = ap325rxa_nor_flash_partitions, + .nr_parts = ARRAY_SIZE(ap325rxa_nor_flash_partitions), +}; + +static struct resource ap325rxa_nor_flash_resources[] = { + [0] = { + .name = "NOR Flash", + .start = 0x00000000, + .end = 0x00ffffff, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device ap325rxa_nor_flash_device = { + .name = "physmap-flash", + .resource = ap325rxa_nor_flash_resources, + .num_resources = ARRAY_SIZE(ap325rxa_nor_flash_resources), + .dev = { + .platform_data = &ap325rxa_nor_flash_data, + }, +}; + +static struct platform_device *ap325rxa_devices[] __initdata = { + &smc9118_device, + &ap325rxa_nor_flash_device +}; + +static int __init ap325rxa_devices_setup(void) +{ + return platform_add_devices(ap325rxa_devices, + ARRAY_SIZE(ap325rxa_devices)); +} +device_initcall(ap325rxa_devices_setup); + +#define MSTPCR0 (0xA4150030) +#define MSTPCR2 (0xA4150038) + +static void __init ap325rxa_setup(char **cmdline_p) +{ + /* enable VEU0 + VEU1 */ + ctrl_outl(ctrl_inl(MSTPCR2) & ~0x00000044, MSTPCR2); /* bit 2 + 6 */ + + /* enable MERAM */ + ctrl_outl(ctrl_inl(MSTPCR0) & ~0x00000001, MSTPCR0); /* bit 0 */ +} + +static struct sh_machine_vector mv_ap325rxa __initmv = { + .mv_name = "AP-325RXA", + .mv_setup = ap325rxa_setup, +}; diff --git a/arch/sh/configs/ap325rxa_defconfig b/arch/sh/configs/ap325rxa_defconfig new file mode 100644 index 00000000000..5471df53753 --- /dev/null +++ b/arch/sh/configs/ap325rxa_defconfig @@ -0,0 +1,947 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.26-rc4 +# Wed Jun 4 17:30:00 2008 +# +CONFIG_SUPERH=y +CONFIG_SUPERH32=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_NO_VIRT_TO_BUS=y +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_KALLSYMS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_CLASSIC_RCU=y + +# +# System type +# +CONFIG_CPU_SH4=y +CONFIG_CPU_SH4A=y +CONFIG_CPU_SHX2=y +# CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7203 is not set +# CONFIG_CPU_SUBTYPE_SH7206 is not set +# CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set +# CONFIG_CPU_SUBTYPE_SH7705 is not set +# CONFIG_CPU_SUBTYPE_SH7706 is not set +# CONFIG_CPU_SUBTYPE_SH7707 is not set +# CONFIG_CPU_SUBTYPE_SH7708 is not set +# CONFIG_CPU_SUBTYPE_SH7709 is not set +# CONFIG_CPU_SUBTYPE_SH7710 is not set +# CONFIG_CPU_SUBTYPE_SH7712 is not set +# CONFIG_CPU_SUBTYPE_SH7720 is not set +# CONFIG_CPU_SUBTYPE_SH7721 is not set +# CONFIG_CPU_SUBTYPE_SH7750 is not set +# CONFIG_CPU_SUBTYPE_SH7091 is not set +# CONFIG_CPU_SUBTYPE_SH7750R is not set +# CONFIG_CPU_SUBTYPE_SH7750S is not set +# CONFIG_CPU_SUBTYPE_SH7751 is not set +# CONFIG_CPU_SUBTYPE_SH7751R is not set +# CONFIG_CPU_SUBTYPE_SH7760 is not set +# CONFIG_CPU_SUBTYPE_SH4_202 is not set +CONFIG_CPU_SUBTYPE_SH7723=y +# CONFIG_CPU_SUBTYPE_SH7763 is not set +# CONFIG_CPU_SUBTYPE_SH7770 is not set +# CONFIG_CPU_SUBTYPE_SH7780 is not set +# CONFIG_CPU_SUBTYPE_SH7785 is not set +# CONFIG_CPU_SUBTYPE_SHX3 is not set +# CONFIG_CPU_SUBTYPE_SH7343 is not set +# CONFIG_CPU_SUBTYPE_SH7722 is not set +# CONFIG_CPU_SUBTYPE_SH7366 is not set +# CONFIG_CPU_SUBTYPE_SH5_101 is not set +# CONFIG_CPU_SUBTYPE_SH5_103 is not set + +# +# Memory management options +# +CONFIG_QUICKLIST=y +CONFIG_MMU=y +CONFIG_PAGE_OFFSET=0x80000000 +CONFIG_MEMORY_START=0x08000000 +CONFIG_MEMORY_SIZE=0x08000000 +CONFIG_29BIT=y +# CONFIG_X2TLB is not set +CONFIG_VSYSCALL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_MAX_ACTIVE_REGIONS=1 +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set +# CONFIG_PAGE_SIZE_64KB is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_SPARSEMEM_STATIC=y +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=2 + +# +# Cache configuration +# +# CONFIG_SH_DIRECT_MAPPED is not set +CONFIG_CACHE_WRITEBACK=y +# CONFIG_CACHE_WRITETHROUGH is not set +# CONFIG_CACHE_OFF is not set + +# +# Processor features +# +CONFIG_CPU_LITTLE_ENDIAN=y +# CONFIG_CPU_BIG_ENDIAN is not set +CONFIG_SH_FPU=y +# CONFIG_SH_STORE_QUEUES is not set +CONFIG_CPU_HAS_INTEVT=y +CONFIG_CPU_HAS_SR_RB=y +CONFIG_CPU_HAS_PTEA=y +CONFIG_CPU_HAS_FPU=y + +# +# Board support +# +CONFIG_SH_AP325RXA=y + +# +# Timer and clock configuration +# +CONFIG_SH_TMU=y +CONFIG_SH_TIMER_IRQ=16 +CONFIG_SH_PCLK_FREQ=33333333 +CONFIG_TICK_ONESHOT=y +# CONFIG_NO_HZ is not set +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# DMA support +# +# CONFIG_SH_DMA is not set + +# +# Companion Chips +# + +# +# Additional SuperH Device Drivers +# +# CONFIG_HEARTBEAT is not set +# CONFIG_PUSH_SWITCH is not set + +# +# Kernel features +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set +# CONFIG_KEXEC is not set +# CONFIG_CRASH_DUMP is not set +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_PREEMPT=y +# CONFIG_PREEMPT_RCU is not set +CONFIG_GUSA=y + +# +# Boot options +# +CONFIG_ZERO_PAGE_OFFSET=0x00001000 +CONFIG_BOOT_LINK_OFFSET=0x00800000 +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="console=tty1 console=ttySC5,38400 root=/dev/nfs ip=dhcp" + +# +# Bus options +# +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_MULTIPLE_TABLES is not set +# CONFIG_IP_ROUTE_MULTIPATH is not set +# CONFIG_IP_ROUTE_VERBOSE is not set +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0xffffffff +CONFIG_MTD_PHYSMAP_LEN=0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=0 +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=4 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_STNIC is not set +# CONFIG_SMC91X is not set +CONFIG_SMC911X=y +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_NR_UARTS=6 +CONFIG_SERIAL_SH_SCI_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +CONFIG_DUMMY_CONSOLE=y + +# +# Sound +# +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_RTC_CLASS is not set +# CONFIG_UIO is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +# CONFIG_MSDOS_FS is not set +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +CONFIG_NFSD=y +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set +# CONFIG_NFSD_V4 is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +CONFIG_NLS_CODEPAGE_932=y +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_SAMPLES is not set +# CONFIG_SH_STANDARD_BIOS is not set +# CONFIG_EARLY_SCIF_CONSOLE is not set +# CONFIG_SH_KGDB is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/sh/tools/mach-types b/arch/sh/tools/mach-types index 1ae9fefed0f..3a53f04d72d 100644 --- a/arch/sh/tools/mach-types +++ b/arch/sh/tools/mach-types @@ -47,3 +47,4 @@ CAYMAN SH_CAYMAN SDK7780 SH_SDK7780 MIGOR SH_MIGOR RSK7203 SH_RSK7203 +AP325RXA SH_AP325RXA -- cgit v1.2.3 From c63847a3621d2bac054f5709783860ecabd0ee7e Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Fri, 6 Jun 2008 17:04:08 +0900 Subject: sh: Add SCIF2 support for SH7763. SH7763 has 3 SCIF device. Current code supports SCIF0 and 1. SCIF0 and 1 are same register constitution, but only SCIF2 is different. I added support of SCIF2. Signed-off-by: Nobuhiro Iwamatsu Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/sh4a/setup-sh7763.c | 10 +++++++-- drivers/serial/sh-sci.c | 17 ++++++++++++++- drivers/serial/sh-sci.h | 38 ++++++++++++++++++++++++---------- 3 files changed, 51 insertions(+), 14 deletions(-) diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c index f189a559462..3b278df8a53 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c @@ -3,6 +3,7 @@ * * Copyright (C) 2006 Paul Mundt * Copyright (C) 2007 Yoshihiro Shimoda + * Copyright (C) 2008 Nobuhiro Iwamatsu * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -55,6 +56,11 @@ static struct plat_sci_port sci_platform_data[] = { .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCIF, .irqs = { 76, 77, 79, 78 }, + }, { + .mapbase = 0xffe10000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 104, 105, 107, 106 }, }, { .flags = 0, } @@ -208,8 +214,8 @@ static struct intc_vect vectors[] __initdata = { INTC_VECT(TMU5, 0xe40), INTC_VECT(ADC, 0xe60), INTC_VECT(SSI0, 0xe80), INTC_VECT(SSI1, 0xea0), INTC_VECT(SSI2, 0xec0), INTC_VECT(SSI3, 0xee0), - INTC_VECT(SCIF1_ERI, 0xf00), INTC_VECT(SCIF1_RXI, 0xf20), - INTC_VECT(SCIF1_BRI, 0xf40), INTC_VECT(SCIF1_TXI, 0xf60), + INTC_VECT(SCIF2_ERI, 0xf00), INTC_VECT(SCIF2_RXI, 0xf20), + INTC_VECT(SCIF2_BRI, 0xf40), INTC_VECT(SCIF2_TXI, 0xf60), INTC_VECT(GPIO_CH0, 0xf80), INTC_VECT(GPIO_CH1, 0xfa0), INTC_VECT(GPIO_CH2, 0xfc0), INTC_VECT(GPIO_CH3, 0xfe0), }; diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index 208e42ba945..3df2aaec829 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -410,7 +410,6 @@ static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag) #endif #if defined(CONFIG_CPU_SUBTYPE_SH7760) || \ - defined(CONFIG_CPU_SUBTYPE_SH7763) || \ defined(CONFIG_CPU_SUBTYPE_SH7780) || \ defined(CONFIG_CPU_SUBTYPE_SH7785) static inline int scif_txroom(struct uart_port *port) @@ -422,6 +421,22 @@ static inline int scif_rxroom(struct uart_port *port) { return sci_in(port, SCRFDR) & 0xff; } +#elif defined(CONFIG_CPU_SUBTYPE_SH7763) +static inline int scif_txroom(struct uart_port *port) +{ + if((port->mapbase == 0xffe00000) || (port->mapbase == 0xffe08000)) /* SCIF0/1*/ + return SCIF_TXROOM_MAX - (sci_in(port, SCTFDR) & 0xff); + else /* SCIF2 */ + return SCIF2_TXROOM_MAX - (sci_in(port, SCFDR) >> 8); +} + +static inline int scif_rxroom(struct uart_port *port) +{ + if((port->mapbase == 0xffe00000) || (port->mapbase == 0xffe08000)) /* SCIF0/1*/ + return sci_in(port, SCRFDR) & 0xff; + else /* SCIF2 */ + return sci_in(port, SCFDR) & SCIF2_RFDC_MASK; +} #else static inline int scif_txroom(struct uart_port *port) { diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h index eb84833233f..cd728df6a01 100644 --- a/drivers/serial/sh-sci.h +++ b/drivers/serial/sh-sci.h @@ -123,8 +123,9 @@ #elif defined(CONFIG_CPU_SUBTYPE_SH7763) # define SCSPTR0 0xffe00024 /* 16 bit SCIF */ # define SCSPTR1 0xffe08024 /* 16 bit SCIF */ +# define SCSPTR2 0xffe10020 /* 16 bit SCIF/IRDA */ # define SCIF_ORER 0x0001 /* overrun error bit */ -# define SCSCR_INIT(port) 0x3a /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ +# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ # define SCIF_ONLY #elif defined(CONFIG_CPU_SUBTYPE_SH7770) # define SCSPTR0 0xff923020 /* 16 bit SCIF */ @@ -188,6 +189,7 @@ defined(CONFIG_CPU_SUBTYPE_SH7750S) || \ defined(CONFIG_CPU_SUBTYPE_SH7751) || \ defined(CONFIG_CPU_SUBTYPE_SH7751R) || \ + defined(CONFIG_CPU_SUBTYPE_SH7763) || \ defined(CONFIG_CPU_SUBTYPE_SH7780) || \ defined(CONFIG_CPU_SUBTYPE_SH7785) || \ defined(CONFIG_CPU_SUBTYPE_SHX3) @@ -225,14 +227,21 @@ #if defined(CONFIG_CPU_SUBTYPE_SH7705) || \ defined(CONFIG_CPU_SUBTYPE_SH7720) || \ defined(CONFIG_CPU_SUBTYPE_SH7721) -#define SCIF_ORER 0x0200 -#define SCIF_ERRORS ( SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK | SCIF_ORER) -#define SCIF_RFDC_MASK 0x007f -#define SCIF_TXROOM_MAX 64 +# define SCIF_ORER 0x0200 +# define SCIF_ERRORS ( SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK | SCIF_ORER) +# define SCIF_RFDC_MASK 0x007f +# define SCIF_TXROOM_MAX 64 +#elif defined(CONFIG_CPU_SUBTYPE_SH7763) +# define SCIF_ERRORS ( SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK ) +# define SCIF_RFDC_MASK 0x007f +# define SCIF_TXROOM_MAX 64 +/* SH7763 SCIF2 support */ +# define SCIF2_RFDC_MASK 0x001f +# define SCIF2_TXROOM_MAX 16 #else -#define SCIF_ERRORS ( SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK) -#define SCIF_RFDC_MASK 0x001f -#define SCIF_TXROOM_MAX 16 +# define SCIF_ERRORS ( SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK) +# define SCIF_RFDC_MASK 0x001f +# define SCIF_TXROOM_MAX 16 #endif #if defined(SCI_ONLY) @@ -445,11 +454,16 @@ SCIF_FNS(SCFCR, 0x0c, 8, 0x18, 16) defined(CONFIG_CPU_SUBTYPE_SH7763) || \ defined(CONFIG_CPU_SUBTYPE_SH7780) || \ defined(CONFIG_CPU_SUBTYPE_SH7785) -SCIF_FNS(SCFDR, 0x0e, 16, 0x1C, 16) SCIF_FNS(SCTFDR, 0x0e, 16, 0x1C, 16) SCIF_FNS(SCRFDR, 0x0e, 16, 0x20, 16) SCIF_FNS(SCSPTR, 0, 0, 0x24, 16) SCIF_FNS(SCLSR, 0, 0, 0x28, 16) +#if defined(CONFIG_CPU_SUBTYPE_SH7763) +/* SH7763 SCIF2 */ +SCIF_FNS(SCFDR, 0, 0, 0x1C, 16) +SCIF_FNS(SCSPTR2, 0, 0, 0x20, 16) +SCIF_FNS(SCLSR2, 0, 0, 0x24, 16) +#endif /* CONFIG_CPU_SUBTYPE_SH7763 */ #else SCIF_FNS(SCFDR, 0x0e, 16, 0x1C, 16) #if defined(CONFIG_CPU_SUBTYPE_SH7722) @@ -652,6 +666,9 @@ static inline int sci_rxd_in(struct uart_port *port) return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */ if (port->mapbase == 0xffe08000) return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */ + if (port->mapbase == 0xffe10000) + return ctrl_inw(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF/IRDA */ + return 1; } #elif defined(CONFIG_CPU_SUBTYPE_SH7770) @@ -764,8 +781,7 @@ static inline int sci_rxd_in(struct uart_port *port) * -- Mitch Davis - 15 Jul 2000 */ -#if defined(CONFIG_CPU_SUBTYPE_SH7763) || \ - defined(CONFIG_CPU_SUBTYPE_SH7780) || \ +#if defined(CONFIG_CPU_SUBTYPE_SH7780) || \ defined(CONFIG_CPU_SUBTYPE_SH7785) #define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(16*bps)-1) #elif defined(CONFIG_CPU_SUBTYPE_SH7705) || \ -- cgit v1.2.3 From 4cec1a37ba7d9dce6ed5d8259b95272100a98b1f Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Fri, 6 Jun 2008 17:04:56 +0900 Subject: sh: Renesas Solutions SH7763RDP board support This patch adds basic support for the SH7763RDP board. This supports a basic stuff provided in SH7763, like SCIF, NOR Flash and USB host. Signed-off-by: Nobuhiro Iwamatsu Signed-off-by: Paul Mundt --- arch/sh/Kconfig | 7 + arch/sh/Makefile | 1 + arch/sh/boards/renesas/sh7763rdp/Makefile | 1 + arch/sh/boards/renesas/sh7763rdp/irq.c | 45 ++ arch/sh/boards/renesas/sh7763rdp/setup.c | 128 ++++ arch/sh/configs/sh7763rdp_defconfig | 1052 +++++++++++++++++++++++++++++ arch/sh/tools/mach-types | 1 + include/asm-sh/sh7763rdp.h | 54 ++ 8 files changed, 1289 insertions(+) create mode 100644 arch/sh/boards/renesas/sh7763rdp/Makefile create mode 100644 arch/sh/boards/renesas/sh7763rdp/irq.c create mode 100644 arch/sh/boards/renesas/sh7763rdp/setup.c create mode 100644 arch/sh/configs/sh7763rdp_defconfig create mode 100644 include/asm-sh/sh7763rdp.h diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index ca5efe64fad..9bbb70547f5 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -509,6 +509,13 @@ config SH_AP325RXA Renesas "AP-325RXA" support. Compatible with ALGO SYSTEM CO.,LTD. "AP-320A" +config SH_SH7763RDP + bool "SH7763RDP" + depends on CPU_SUBTYPE_SH7763 + help + Select SH7763RDP if configuring for a Renesas SH7763 + evaluation board. + config SH_EDOSK7705 bool "EDOSK7705" depends on CPU_SUBTYPE_SH7705 diff --git a/arch/sh/Makefile b/arch/sh/Makefile index 73182d5e810..1452c4df7de 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -123,6 +123,7 @@ machdir-$(CONFIG_SH_SDK7780) += renesas/sdk7780 machdir-$(CONFIG_SH_X3PROTO) += renesas/x3proto machdir-$(CONFIG_SH_RSK7203) += renesas/rsk7203 machdir-$(CONFIG_SH_AP325RXA) += renesas/ap325rxa +machdir-$(CONFIG_SH_SH7763RDP) += renesas/sh7763rdp machdir-$(CONFIG_SH_SH4202_MICRODEV) += superh/microdev machdir-$(CONFIG_SH_LANDISK) += landisk machdir-$(CONFIG_SH_TITAN) += titan diff --git a/arch/sh/boards/renesas/sh7763rdp/Makefile b/arch/sh/boards/renesas/sh7763rdp/Makefile new file mode 100644 index 00000000000..f6c0b55516d --- /dev/null +++ b/arch/sh/boards/renesas/sh7763rdp/Makefile @@ -0,0 +1 @@ +obj-y := setup.o irq.o diff --git a/arch/sh/boards/renesas/sh7763rdp/irq.c b/arch/sh/boards/renesas/sh7763rdp/irq.c new file mode 100644 index 00000000000..fd850bad2de --- /dev/null +++ b/arch/sh/boards/renesas/sh7763rdp/irq.c @@ -0,0 +1,45 @@ +/* + * linux/arch/sh/boards/renesas/sh7763rdp/irq.c + * + * Renesas Solutions SH7763RDP Support. + * + * Copyright (C) 2008 Renesas Solutions Corp. + * Copyright (C) 2008 Nobuhiro Iwamatsu + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include +#include +#include +#include +#include + +#define INTC_BASE (0xFFD00000) +#define INTC_INT2PRI7 (INTC_BASE+0x4001C) +#define INTC_INT2MSKCR (INTC_BASE+0x4003C) +#define INTC_INT2MSKCR1 (INTC_BASE+0x400D4) + +/* + * Initialize IRQ setting + */ +void __init init_sh7763rdp_IRQ(void) +{ + /* GPIO enabled */ + ctrl_outl(1 << 25, INTC_INT2MSKCR); + + /* enable GPIO interrupts */ + ctrl_outl((ctrl_inl(INTC_INT2PRI7) & 0xFF00FFFF) | 0x000F0000, + INTC_INT2PRI7); + + /* USBH enabled */ + ctrl_outl(1 << 17, INTC_INT2MSKCR1); + + /* GETHER enabled */ + ctrl_outl(1 << 16, INTC_INT2MSKCR1); + + /* DMAC enabled */ + ctrl_outl(1 << 8, INTC_INT2MSKCR); +} diff --git a/arch/sh/boards/renesas/sh7763rdp/setup.c b/arch/sh/boards/renesas/sh7763rdp/setup.c new file mode 100644 index 00000000000..925f16af712 --- /dev/null +++ b/arch/sh/boards/renesas/sh7763rdp/setup.c @@ -0,0 +1,128 @@ +/* + * linux/arch/sh/boards/renesas/sh7763rdp/setup.c + * + * Renesas Solutions sh7763rdp board + * + * Copyright (C) 2008 Renesas Solutions Corp. + * Copyright (C) 2008 Nobuhiro Iwamatsu + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include +#include +#include +#include +#include +#include + +/* NOR Flash */ +static struct mtd_partition sh7763rdp_nor_flash_partitions[] = { + { + .name = "U-Boot", + .offset = 0, + .size = (2 * 128 * 1024), + .mask_flags = MTD_WRITEABLE, /* Read-only */ + }, { + .name = "Linux-Kernel", + .offset = MTDPART_OFS_APPEND, + .size = (20 * 128 * 1024), + }, { + .name = "Root Filesystem", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct physmap_flash_data sh7763rdp_nor_flash_data = { + .width = 2, + .parts = sh7763rdp_nor_flash_partitions, + .nr_parts = ARRAY_SIZE(sh7763rdp_nor_flash_partitions), +}; + +static struct resource sh7763rdp_nor_flash_resources[] = { + [0] = { + .name = "NOR Flash", + .start = 0, + .end = (64 * 1024 * 1024), + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device sh7763rdp_nor_flash_device = { + .name = "physmap-flash", + .resource = sh7763rdp_nor_flash_resources, + .num_resources = ARRAY_SIZE(sh7763rdp_nor_flash_resources), + .dev = { + .platform_data = &sh7763rdp_nor_flash_data, + }, +}; + +static struct platform_device *sh7763rdp_devices[] __initdata = { + &sh7763rdp_nor_flash_device, +}; + +static int __init sh7763rdp_devices_setup(void) +{ + return platform_add_devices(sh7763rdp_devices, + ARRAY_SIZE(sh7763rdp_devices)); +} +__initcall(sh7763rdp_devices_setup); + +static void __init sh7763rdp_setup(char **cmdline_p) +{ + /* Board version check */ + if (ctrl_inw(CPLD_BOARD_ID_ERV_REG) == 0xECB1) + printk(KERN_INFO "RTE Standard Configuration\n"); + else + printk(KERN_INFO "RTA Standard Configuration\n"); + + /* USB pin select bits (clear bit 5-2 to 0) */ + ctrl_outw((ctrl_inw(PORT_PSEL2) & 0xFFC3), PORT_PSEL2); + /* USBH setup port I controls to other (clear bits 4-9 to 0) */ + ctrl_outw(ctrl_inw(PORT_PICR) & 0xFC0F, PORT_PICR); + + /* Select USB Host controller */ + ctrl_outw(0x00, USB_USBHSC); + + /* For LCD */ + /* set PTJ7-1, bits 15-2 of PJCR to 0 */ + ctrl_outw(ctrl_inw(PORT_PJCR) & 0x0003, PORT_PJCR); + /* set PTI5, bits 11-10 of PICR to 0 */ + ctrl_outw(ctrl_inw(PORT_PICR) & 0xF3FF, PORT_PICR); + ctrl_outw(0, PORT_PKCR); + ctrl_outw(0, PORT_PLCR); + /* set PSEL2 bits 14-8, 5-4, of PSEL2 to 0 */ + ctrl_outw((ctrl_inw(PORT_PSEL2) & 0x00C0), PORT_PSEL2); + /* set PSEL3 bits 14-12, 6-4, 2-0 of PSEL3 to 0 */ + ctrl_outw((ctrl_inw(PORT_PSEL3) & 0x0700), PORT_PSEL3); + + /* For HAC */ + /* bit3-0 0100:HAC & SSI1 enable */ + ctrl_outw((ctrl_inw(PORT_PSEL1) & 0xFFF0) | 0x0004, PORT_PSEL1); + /* bit14 1:SSI_HAC_CLK enable */ + ctrl_outw(ctrl_inw(PORT_PSEL4) | 0x4000, PORT_PSEL4); + + /* SH-Ether */ + ctrl_outw((ctrl_inw(PORT_PSEL1) & ~0xff00) | 0x2400, PORT_PSEL1); + ctrl_outw(0x0, PORT_PFCR); + ctrl_outw(0x0, PORT_PFCR); + ctrl_outw(0x0, PORT_PFCR); + + /* MMC */ + /*selects SCIF and MMC other functions */ + ctrl_outw(0x0001, PORT_PSEL0); + /* MMC clock operates */ + ctrl_outl(ctrl_inl(MSTPCR1) & ~0x8, MSTPCR1); + ctrl_outw(ctrl_inw(PORT_PACR) & ~0x3000, PORT_PACR); + ctrl_outw(ctrl_inw(PORT_PCCR) & ~0xCFC3, PORT_PCCR); +} + +static struct sh_machine_vector mv_sh7763rdp __initmv = { + .mv_name = "sh7763drp", + .mv_setup = sh7763rdp_setup, + .mv_nr_irqs = 112, + .mv_init_irq = init_sh7763rdp_IRQ, +}; diff --git a/arch/sh/configs/sh7763rdp_defconfig b/arch/sh/configs/sh7763rdp_defconfig new file mode 100644 index 00000000000..83f3fe5db3e --- /dev/null +++ b/arch/sh/configs/sh7763rdp_defconfig @@ -0,0 +1,1052 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.26-rc4 +# Fri Jun 6 12:20:17 2008 +# +CONFIG_SUPERH=y +CONFIG_SUPERH32=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_NO_VIRT_TO_BUS=y +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +CONFIG_UTS_NS=y +CONFIG_IPC_NS=y +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_PROFILING=y +# CONFIG_MARKERS is not set +CONFIG_OPROFILE=y +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +# CONFIG_MODULE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_KMOD is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y + +# +# System type +# +CONFIG_CPU_SH4=y +CONFIG_CPU_SH4A=y +# CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7203 is not set +# CONFIG_CPU_SUBTYPE_SH7206 is not set +# CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set +# CONFIG_CPU_SUBTYPE_SH7705 is not set +# CONFIG_CPU_SUBTYPE_SH7706 is not set +# CONFIG_CPU_SUBTYPE_SH7707 is not set +# CONFIG_CPU_SUBTYPE_SH7708 is not set +# CONFIG_CPU_SUBTYPE_SH7709 is not set +# CONFIG_CPU_SUBTYPE_SH7710 is not set +# CONFIG_CPU_SUBTYPE_SH7712 is not set +# CONFIG_CPU_SUBTYPE_SH7720 is not set +# CONFIG_CPU_SUBTYPE_SH7721 is not set +# CONFIG_CPU_SUBTYPE_SH7750 is not set +# CONFIG_CPU_SUBTYPE_SH7091 is not set +# CONFIG_CPU_SUBTYPE_SH7750R is not set +# CONFIG_CPU_SUBTYPE_SH7750S is not set +# CONFIG_CPU_SUBTYPE_SH7751 is not set +# CONFIG_CPU_SUBTYPE_SH7751R is not set +# CONFIG_CPU_SUBTYPE_SH7760 is not set +# CONFIG_CPU_SUBTYPE_SH4_202 is not set +# CONFIG_CPU_SUBTYPE_SH7723 is not set +CONFIG_CPU_SUBTYPE_SH7763=y +# CONFIG_CPU_SUBTYPE_SH7770 is not set +# CONFIG_CPU_SUBTYPE_SH7780 is not set +# CONFIG_CPU_SUBTYPE_SH7785 is not set +# CONFIG_CPU_SUBTYPE_SHX3 is not set +# CONFIG_CPU_SUBTYPE_SH7343 is not set +# CONFIG_CPU_SUBTYPE_SH7722 is not set +# CONFIG_CPU_SUBTYPE_SH7366 is not set +# CONFIG_CPU_SUBTYPE_SH5_101 is not set +# CONFIG_CPU_SUBTYPE_SH5_103 is not set + +# +# Memory management options +# +CONFIG_QUICKLIST=y +CONFIG_MMU=y +CONFIG_PAGE_OFFSET=0x80000000 +CONFIG_MEMORY_START=0x0c000000 +CONFIG_MEMORY_SIZE=0x04000000 +CONFIG_29BIT=y +CONFIG_VSYSCALL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_MAX_ACTIVE_REGIONS=1 +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set +# CONFIG_PAGE_SIZE_64KB is not set +CONFIG_SELECT_MEMORY_MODEL=y +# CONFIG_FLATMEM_MANUAL is not set +# CONFIG_DISCONTIGMEM_MANUAL is not set +CONFIG_SPARSEMEM_MANUAL=y +CONFIG_SPARSEMEM=y +CONFIG_HAVE_MEMORY_PRESENT=y +CONFIG_SPARSEMEM_STATIC=y +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +# CONFIG_MEMORY_HOTPLUG is not set +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=2 + +# +# Cache configuration +# +# CONFIG_SH_DIRECT_MAPPED is not set +CONFIG_CACHE_WRITEBACK=y +# CONFIG_CACHE_WRITETHROUGH is not set +# CONFIG_CACHE_OFF is not set + +# +# Processor features +# +CONFIG_CPU_LITTLE_ENDIAN=y +# CONFIG_CPU_BIG_ENDIAN is not set +CONFIG_SH_FPU=y +# CONFIG_SH_STORE_QUEUES is not set +CONFIG_CPU_HAS_INTEVT=y +CONFIG_CPU_HAS_SR_RB=y +CONFIG_CPU_HAS_FPU=y + +# +# Board support +# +CONFIG_SH_SH7763RDP=y + +# +# Timer and clock configuration +# +CONFIG_SH_TMU=y +CONFIG_SH_TIMER_IRQ=28 +CONFIG_SH_PCLK_FREQ=66666666 +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# DMA support +# +# CONFIG_SH_DMA is not set + +# +# Companion Chips +# + +# +# Additional SuperH Device Drivers +# +# CONFIG_HEARTBEAT is not set +# CONFIG_PUSH_SWITCH is not set + +# +# Kernel features +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set +# CONFIG_KEXEC is not set +# CONFIG_CRASH_DUMP is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_GUSA=y + +# +# Boot options +# +CONFIG_ZERO_PAGE_OFFSET=0x00001000 +CONFIG_BOOT_LINK_OFFSET=0x00800000 +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="console=ttySC2,115200 root=/dev/sda1 rootdelay=10" + +# +# Bus options +# +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +CONFIG_WIRELESS_EXT=y +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +# CONFIG_MTD_CHAR is not set +CONFIG_MTD_BLKDEVS=y +# CONFIG_MTD_BLOCK is not set +# CONFIG_MTD_BLOCK_RO is not set +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +CONFIG_MTD_CFI_GEOMETRY=y +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_STAA=y +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x8000000 +CONFIG_MTD_PHYSMAP_LEN=0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_FIXED_PHY is not set +CONFIG_MDIO_BITBANG=y +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_STNIC is not set +# CONFIG_SMC91X is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_NR_UARTS=3 +CONFIG_SERIAL_SH_SCI_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_RTC_CLASS is not set +# CONFIG_UIO is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_AUTOFS_FS=y +CONFIG_AUTOFS4_FS=y +# CONFIG_FUSE_FS is not set +CONFIG_GENERIC_ACL=y + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_737=y +CONFIG_NLS_CODEPAGE_775=y +CONFIG_NLS_CODEPAGE_850=y +CONFIG_NLS_CODEPAGE_852=y +CONFIG_NLS_CODEPAGE_855=y +CONFIG_NLS_CODEPAGE_857=y +CONFIG_NLS_CODEPAGE_860=y +CONFIG_NLS_CODEPAGE_861=y +CONFIG_NLS_CODEPAGE_862=y +CONFIG_NLS_CODEPAGE_863=y +CONFIG_NLS_CODEPAGE_864=y +CONFIG_NLS_CODEPAGE_865=y +CONFIG_NLS_CODEPAGE_866=y +CONFIG_NLS_CODEPAGE_869=y +CONFIG_NLS_CODEPAGE_936=y +CONFIG_NLS_CODEPAGE_950=y +CONFIG_NLS_CODEPAGE_932=y +CONFIG_NLS_CODEPAGE_949=y +CONFIG_NLS_CODEPAGE_874=y +CONFIG_NLS_ISO8859_8=y +CONFIG_NLS_CODEPAGE_1250=y +CONFIG_NLS_CODEPAGE_1251=y +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_ISO8859_2=y +CONFIG_NLS_ISO8859_3=y +CONFIG_NLS_ISO8859_4=y +CONFIG_NLS_ISO8859_5=y +CONFIG_NLS_ISO8859_6=y +CONFIG_NLS_ISO8859_7=y +CONFIG_NLS_ISO8859_9=y +CONFIG_NLS_ISO8859_13=y +CONFIG_NLS_ISO8859_14=y +CONFIG_NLS_ISO8859_15=y +CONFIG_NLS_KOI8_R=y +CONFIG_NLS_KOI8_U=y +CONFIG_NLS_UTF8=y +# CONFIG_DLM is not set + +# +# Kernel hacking +# +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +# CONFIG_PRINTK_TIME is not set +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_SAMPLES is not set +# CONFIG_SH_STANDARD_BIOS is not set +# CONFIG_EARLY_SCIF_CONSOLE is not set +# CONFIG_SH_KGDB is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/sh/tools/mach-types b/arch/sh/tools/mach-types index 3a53f04d72d..4473723685c 100644 --- a/arch/sh/tools/mach-types +++ b/arch/sh/tools/mach-types @@ -48,3 +48,4 @@ SDK7780 SH_SDK7780 MIGOR SH_MIGOR RSK7203 SH_RSK7203 AP325RXA SH_AP325RXA +SH7763RDP SH_SH7763RDP diff --git a/include/asm-sh/sh7763rdp.h b/include/asm-sh/sh7763rdp.h new file mode 100644 index 00000000000..8750cc85297 --- /dev/null +++ b/include/asm-sh/sh7763rdp.h @@ -0,0 +1,54 @@ +#ifndef __ASM_SH_SH7763RDP_H +#define __ASM_SH_SH7763RDP_H + +/* + * linux/include/asm-sh/sh7763drp.h + * + * Copyright (C) 2008 Renesas Solutions + * Copyright (C) 2008 Nobuhiro Iwamatsu + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + */ +#include + +/* clock control */ +#define MSTPCR1 0xFFC80038 + +/* PORT */ +#define PORT_PSEL0 0xFFEF0070 +#define PORT_PSEL1 0xFFEF0072 +#define PORT_PSEL2 0xFFEF0074 +#define PORT_PSEL3 0xFFEF0076 +#define PORT_PSEL4 0xFFEF0078 + +#define PORT_PACR 0xFFEF0000 +#define PORT_PCCR 0xFFEF0004 +#define PORT_PFCR 0xFFEF000A +#define PORT_PGCR 0xFFEF000C +#define PORT_PHCR 0xFFEF000E +#define PORT_PICR 0xFFEF0010 +#define PORT_PJCR 0xFFEF0012 +#define PORT_PKCR 0xFFEF0014 +#define PORT_PLCR 0xFFEF0016 +#define PORT_PMCR 0xFFEF0018 +#define PORT_PNCR 0xFFEF001A + +/* FPGA */ +#define CPLD_BOARD_ID_ERV_REG 0xB1000000 +#define CPLD_CPLD_CMD_REG 0xB1000006 + +/* + * USB SH7763RDP board can use Host only. + */ +#define USB_USBHSC 0xFFEC80f0 + +/* arch/sh/boards/renesas/sh7763rdp/irq.c */ +void init_sh7763rdp_IRQ(void); +int sh7763rdp_irq_demux(int irq); +#define __IO_PREFIX sh7763rdp +#include + +#endif /* __ASM_SH_SH7763RDP_H */ -- cgit v1.2.3 From 306cfd630a4d121cf4e08b894d8b4c4cf106e57e Mon Sep 17 00:00:00 2001 From: Adrian McMenamin Date: Sun, 15 Jun 2008 20:48:09 +0100 Subject: maple: tidy maple_driver code by removing redundant connect/disconnect The connect and disconnect functions are unnecessary - everything they do can be accomplished in the initial probe - so remove them. Signed-off-by: Adrian McMenamin Signed-off-by: Paul Mundt --- include/linux/maple.h | 2 -- 1 file changed, 2 deletions(-) diff --git a/include/linux/maple.h b/include/linux/maple.h index d31e36ebb43..523a286bb47 100644 --- a/include/linux/maple.h +++ b/include/linux/maple.h @@ -61,8 +61,6 @@ struct maple_device { struct maple_driver { unsigned long function; - int (*connect) (struct maple_device * dev); - void (*disconnect) (struct maple_device * dev); struct device_driver drv; }; -- cgit v1.2.3 From 2b7bf930ae762d3124317e36f26a7567dc04e835 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Wed, 18 Jun 2008 01:30:57 +0300 Subject: sh/boards/dreamcast/rtc.c: make 2 functions static This patch makes the needlessly global aica_rtc_{get,set}timeofday() static. Signed-off-by: Adrian Bunk Signed-off-by: Paul Mundt --- arch/sh/boards/dreamcast/rtc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/sh/boards/dreamcast/rtc.c b/arch/sh/boards/dreamcast/rtc.c index b3a876a3b85..a7433685798 100644 --- a/arch/sh/boards/dreamcast/rtc.c +++ b/arch/sh/boards/dreamcast/rtc.c @@ -30,7 +30,7 @@ * * Grabs the current RTC seconds counter and adjusts it to the Unix Epoch. */ -void aica_rtc_gettimeofday(struct timespec *ts) +static void aica_rtc_gettimeofday(struct timespec *ts) { unsigned long val1, val2; @@ -54,7 +54,7 @@ void aica_rtc_gettimeofday(struct timespec *ts) * * Adjusts the given @tv to the AICA Epoch and sets the RTC seconds counter. */ -int aica_rtc_settimeofday(const time_t secs) +static int aica_rtc_settimeofday(const time_t secs) { unsigned long val1, val2; unsigned long adj = secs + TWENTY_YEARS; -- cgit v1.2.3 From 175fb09f4a770fd542947e8c3f4e6dbf07debea9 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Wed, 18 Jun 2008 01:31:03 +0300 Subject: sh: make EARLY_PCI_OP's static This patch makes the needlessly global EARLY_PCI_OP's static. Signed-off-by: Adrian Bunk Signed-off-by: Paul Mundt --- arch/sh/drivers/pci/pci-auto.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/sh/drivers/pci/pci-auto.c b/arch/sh/drivers/pci/pci-auto.c index ea404704ace..cf48b12ee58 100644 --- a/arch/sh/drivers/pci/pci-auto.c +++ b/arch/sh/drivers/pci/pci-auto.c @@ -78,7 +78,7 @@ static struct pci_dev *fake_pci_dev(struct pci_channel *hose, } #define EARLY_PCI_OP(rw, size, type) \ -int early_##rw##_config_##size(struct pci_channel *hose, \ +static int early_##rw##_config_##size(struct pci_channel *hose, \ int top_bus, int bus, int devfn, int offset, type value) \ { \ return pci_##rw##_config_##size( \ -- cgit v1.2.3 From 62410034e79d9249647d1fe6f6f35a06b3747e68 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Wed, 18 Jun 2008 01:33:40 +0300 Subject: sh: make pcibios_max_latency static This patch makes the needlessly global pcibios_max_latency static. Signed-off-by: Adrian Bunk Signed-off-by: Paul Mundt --- arch/sh/drivers/pci/pci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c index f57095a2617..d3839e609aa 100644 --- a/arch/sh/drivers/pci/pci.c +++ b/arch/sh/drivers/pci/pci.c @@ -135,7 +135,7 @@ int pcibios_enable_device(struct pci_dev *dev, int mask) * If we set up a device for bus mastering, we need to check and set * the latency timer as it may not be properly set. */ -unsigned int pcibios_max_latency = 255; +static unsigned int pcibios_max_latency = 255; void pcibios_set_master(struct pci_dev *dev) { -- cgit v1.2.3 From 4c1cfab1e0f9a41246cfdcca78f3700fb67f0a5c Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Wed, 18 Jun 2008 03:36:50 +0300 Subject: sh/kernel/ cleanups This patch contains the following cleanups: - make the following needlessly global code static: - cf-enabler.c: cf_init() - cpu/clock.c: __clk_enable() - cpu/clock.c: __clk_disable() - process_32.c: default_idle() - time_32.c: struct clocksource_sh - timers/timer-tmu.c: struct tmu_timer_ops - remove the following unused functions (no CONFIG_BLK_DEV_FD on sh): - process_{32,64}.c: disable_hlt() - process_{32,64}.c: enable_hlt() Signed-off-by: Adrian Bunk Signed-off-by: Paul Mundt --- arch/sh/kernel/cf-enabler.c | 2 +- arch/sh/kernel/cpu/clock.c | 6 ++---- arch/sh/kernel/process_32.c | 14 +------------- arch/sh/kernel/process_64.c | 10 ---------- arch/sh/kernel/time_32.c | 2 +- arch/sh/kernel/timers/timer-tmu.c | 2 +- include/asm-sh/clock.h | 3 --- include/asm-sh/system.h | 8 -------- include/asm-sh/timer.h | 1 - 9 files changed, 6 insertions(+), 42 deletions(-) diff --git a/arch/sh/kernel/cf-enabler.c b/arch/sh/kernel/cf-enabler.c index 01ff4d05aab..d3d9f320423 100644 --- a/arch/sh/kernel/cf-enabler.c +++ b/arch/sh/kernel/cf-enabler.c @@ -157,7 +157,7 @@ static int __init cf_init_se(void) } #endif -int __init cf_init(void) +static int __init cf_init(void) { if (mach_is_se() || mach_is_7722se() || mach_is_7721se()) return cf_init_se(); diff --git a/arch/sh/kernel/cpu/clock.c b/arch/sh/kernel/cpu/clock.c index b5f1e23ed57..73334c689e9 100644 --- a/arch/sh/kernel/cpu/clock.c +++ b/arch/sh/kernel/cpu/clock.c @@ -88,7 +88,7 @@ static void propagate_rate(struct clk *clk) } } -int __clk_enable(struct clk *clk) +static int __clk_enable(struct clk *clk) { /* * See if this is the first time we're enabling the clock, some @@ -111,7 +111,6 @@ int __clk_enable(struct clk *clk) return 0; } -EXPORT_SYMBOL_GPL(__clk_enable); int clk_enable(struct clk *clk) { @@ -131,7 +130,7 @@ static void clk_kref_release(struct kref *kref) /* Nothing to do */ } -void __clk_disable(struct clk *clk) +static void __clk_disable(struct clk *clk) { int count = kref_put(&clk->kref, clk_kref_release); @@ -143,7 +142,6 @@ void __clk_disable(struct clk *clk) clk->ops->disable(clk); } } -EXPORT_SYMBOL_GPL(__clk_disable); void clk_disable(struct clk *clk) { diff --git a/arch/sh/kernel/process_32.c b/arch/sh/kernel/process_32.c index 921892c351d..3326a45749d 100644 --- a/arch/sh/kernel/process_32.c +++ b/arch/sh/kernel/process_32.c @@ -34,18 +34,6 @@ void (*pm_idle)(void); void (*pm_power_off)(void); EXPORT_SYMBOL(pm_power_off); -void disable_hlt(void) -{ - hlt_counter++; -} -EXPORT_SYMBOL(disable_hlt); - -void enable_hlt(void) -{ - hlt_counter--; -} -EXPORT_SYMBOL(enable_hlt); - static int __init nohlt_setup(char *__unused) { hlt_counter = 1; @@ -60,7 +48,7 @@ static int __init hlt_setup(char *__unused) } __setup("hlt", hlt_setup); -void default_idle(void) +static void default_idle(void) { if (!hlt_counter) { clear_thread_flag(TIF_POLLING_NRFLAG); diff --git a/arch/sh/kernel/process_64.c b/arch/sh/kernel/process_64.c index 0283d813307..b9dbd2d3b4a 100644 --- a/arch/sh/kernel/process_64.c +++ b/arch/sh/kernel/process_64.c @@ -36,16 +36,6 @@ static int hlt_counter = 1; #define HARD_IDLE_TIMEOUT (HZ / 3) -void disable_hlt(void) -{ - hlt_counter++; -} - -void enable_hlt(void) -{ - hlt_counter--; -} - static int __init nohlt_setup(char *__unused) { hlt_counter = 1; diff --git a/arch/sh/kernel/time_32.c b/arch/sh/kernel/time_32.c index 7281342c044..0758b5ee818 100644 --- a/arch/sh/kernel/time_32.c +++ b/arch/sh/kernel/time_32.c @@ -211,7 +211,7 @@ unsigned long sh_hpt_frequency = 0; #define NSEC_PER_CYC_SHIFT 10 -struct clocksource clocksource_sh = { +static struct clocksource clocksource_sh = { .name = "SuperH", .rating = 200, .mask = CLOCKSOURCE_MASK(32), diff --git a/arch/sh/kernel/timers/timer-tmu.c b/arch/sh/kernel/timers/timer-tmu.c index 8935570008d..1ca9ad49b54 100644 --- a/arch/sh/kernel/timers/timer-tmu.c +++ b/arch/sh/kernel/timers/timer-tmu.c @@ -209,7 +209,7 @@ static int tmu_timer_init(void) return 0; } -struct sys_timer_ops tmu_timer_ops = { +static struct sys_timer_ops tmu_timer_ops = { .init = tmu_timer_init, .start = tmu_timer_start, .stop = tmu_timer_stop, diff --git a/include/asm-sh/clock.h b/include/asm-sh/clock.h index b550a27a704..608fda55c0e 100644 --- a/include/asm-sh/clock.h +++ b/include/asm-sh/clock.h @@ -41,9 +41,6 @@ void arch_init_clk_ops(struct clk_ops **, int type); /* arch/sh/kernel/cpu/clock.c */ int clk_init(void); -int __clk_enable(struct clk *); -void __clk_disable(struct clk *); - void clk_recalc_rate(struct clk *); int clk_register(struct clk *); diff --git a/include/asm-sh/system.h b/include/asm-sh/system.h index e65b6b822cb..056d68cd210 100644 --- a/include/asm-sh/system.h +++ b/include/asm-sh/system.h @@ -148,14 +148,6 @@ extern unsigned long cached_to_uncached; extern struct dentry *sh_debugfs_root; -/* XXX - * disable hlt during certain critical i/o operations - */ -#define HAVE_DISABLE_HLT -void disable_hlt(void); -void enable_hlt(void); - -void default_idle(void); void per_cpu_trap_init(void); asmlinkage void break_point_trap(void); diff --git a/include/asm-sh/timer.h b/include/asm-sh/timer.h index 701ba84c704..327f7eb8976 100644 --- a/include/asm-sh/timer.h +++ b/include/asm-sh/timer.h @@ -40,6 +40,5 @@ struct sys_timer *get_sys_timer(void); /* arch/sh/kernel/time.c */ void handle_timer_tick(void); extern unsigned long sh_hpt_frequency; -extern struct clocksource clocksource_sh; #endif /* __ASM_SH_TIMER_H */ -- cgit v1.2.3 From ffb91ad2751723bcc9925cd38e37013e2169e256 Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Wed, 18 Jun 2008 18:29:06 +0900 Subject: sh: Solution Enginge 7710/7712 SH-Ether support Add support SH-Ether for Hitachi Solution Engine. Signed-off-by: Nobuhiro Iwamatsu Signed-off-by: Paul Mundt --- arch/sh/boards/se/770x/setup.c | 49 ++++++++++++++++++++++++++++++++++++++++++ include/asm-sh/se.h | 15 +++++++++++++ 2 files changed, 64 insertions(+) diff --git a/arch/sh/boards/se/770x/setup.c b/arch/sh/boards/se/770x/setup.c index 318bc8a3969..25767cc3a50 100644 --- a/arch/sh/boards/se/770x/setup.c +++ b/arch/sh/boards/se/770x/setup.c @@ -115,9 +115,58 @@ static struct platform_device heartbeat_device = { .resource = heartbeat_resources, }; +/* SH771X Ethernet driver */ +static struct resource sh_eth0_resources[] = { + [0] = { + .start = SH_ETH0_BASE, + .end = SH_ETH0_BASE + 0x1B8, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = SH_ETH0_IRQ, + .end = SH_ETH0_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device sh_eth0_device = { + .name = "sh-eth", + .id = 0, + .dev = { + .platform_data = PHY_ID, + }, + .num_resources = ARRAY_SIZE(sh_eth0_resources), + .resource = sh_eth0_resources, +}; + +static struct resource sh_eth1_resources[] = { + [0] = { + .start = SH_ETH1_BASE, + .end = SH_ETH1_BASE + 0x1B8, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = SH_ETH1_IRQ, + .end = SH_ETH1_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device sh_eth1_device = { + .name = "sh-eth", + .id = 1, + .dev = { + .platform_data = PHY_ID, + }, + .num_resources = ARRAY_SIZE(sh_eth1_resources), + .resource = sh_eth1_resources, +}; + static struct platform_device *se_devices[] __initdata = { &heartbeat_device, &cf_ide_device, + &sh_eth0_device, + &sh_eth1_device, }; static int __init se_devices_setup(void) diff --git a/include/asm-sh/se.h b/include/asm-sh/se.h index bd2596c014a..0e2f720b966 100644 --- a/include/asm-sh/se.h +++ b/include/asm-sh/se.h @@ -76,6 +76,21 @@ #define IRQ_CFCARD 7 #endif +/* SH Ether support (SH7710/SH7712) */ +/* Base address */ +#define SH_ETH0_BASE 0xA7000000 +#define SH_ETH1_BASE 0xA7000400 +/* PHY ID */ +#if defined(CONFIG_CPU_SUBTYPE_SH7710) +# define PHY_ID 0x00 +#elif defined(CONFIG_CPU_SUBTYPE_SH7712) +# define PHY_ID 0x01 +#endif +/* Ether IRQ */ +#define SH_ETH0_IRQ 80 +#define SH_ETH1_IRQ 81 +#define SH_TSU_IRQ 82 + #define __IO_PREFIX se #include -- cgit v1.2.3 From b2e4c109a8a49d1df37572a12e3261e9c7361cc7 Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Wed, 18 Jun 2008 18:31:46 +0900 Subject: sh: Update Solution Enginge 7712 defconfig Enable SH-Ether support and NFS userland support. Signed-off-by: Nobuhiro Iwamatsu Signed-off-by: Paul Mundt --- arch/sh/configs/se7712_defconfig | 659 +++++++++++++++++---------------------- 1 file changed, 285 insertions(+), 374 deletions(-) diff --git a/arch/sh/configs/se7712_defconfig b/arch/sh/configs/se7712_defconfig index 2dd83af988f..7be79cd04eb 100644 --- a/arch/sh/configs/se7712_defconfig +++ b/arch/sh/configs/se7712_defconfig @@ -1,53 +1,57 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.21-rc4 -# Wed Mar 28 10:19:02 2007 +# Linux kernel version: 2.6.26-rc6 +# Wed Jun 18 16:36:08 2008 # CONFIG_SUPERH=y +CONFIG_SUPERH32=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_CALIBRATE_DELAY=y -# CONFIG_GENERIC_TIME is not set +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_NO_VIRT_TO_BUS=y +CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" # CONFIG_LOCALVERSION_AUTO is not set # CONFIG_SWAP is not set CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -55,33 +59,41 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y # CONFIG_BUG is not set CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y # CONFIG_BASE_FULL is not set CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y # CONFIG_SHMEM is not set -CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=1 -# CONFIG_SLOB is not set - -# -# Loadable module support -# CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set # CONFIG_MODULE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set # CONFIG_KMOD is not set - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set # # IO Schedulers @@ -95,57 +107,17 @@ CONFIG_IOSCHED_NOOP=y # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" +CONFIG_CLASSIC_RCU=y # # System type # -CONFIG_SOLUTION_ENGINE=y -CONFIG_SH_SOLUTION_ENGINE=y -# CONFIG_SH_7751_SOLUTION_ENGINE is not set -# CONFIG_SH_7300_SOLUTION_ENGINE is not set -# CONFIG_SH_7343_SOLUTION_ENGINE is not set -# CONFIG_SH_73180_SOLUTION_ENGINE is not set -# CONFIG_SH_7751_SYSTEMH is not set -# CONFIG_SH_HP6XX is not set -# CONFIG_SH_SATURN is not set -# CONFIG_SH_DREAMCAST is not set -# CONFIG_SH_MPC1211 is not set -# CONFIG_SH_SH03 is not set -# CONFIG_SH_SECUREEDGE5410 is not set -# CONFIG_SH_HS7751RVOIP is not set -# CONFIG_SH_7710VOIPGW is not set -# CONFIG_SH_RTS7751R2D is not set -# CONFIG_SH_HIGHLANDER is not set -# CONFIG_SH_EDOSK7705 is not set -# CONFIG_SH_SH4202_MICRODEV is not set -# CONFIG_SH_LANDISK is not set -# CONFIG_SH_TITAN is not set -# CONFIG_SH_SHMIN is not set -# CONFIG_SH_7206_SOLUTION_ENGINE is not set -# CONFIG_SH_7619_SOLUTION_ENGINE is not set -# CONFIG_SH_LBOX_RE2 is not set -# CONFIG_SH_UNKNOWN is not set - -# -# Processor selection -# CONFIG_CPU_SH3=y - -# -# SH-2 Processor Support -# -# CONFIG_CPU_SUBTYPE_SH7604 is not set # CONFIG_CPU_SUBTYPE_SH7619 is not set - -# -# SH-2A Processor Support -# +# CONFIG_CPU_SUBTYPE_SH7203 is not set # CONFIG_CPU_SUBTYPE_SH7206 is not set - -# -# SH-3 Processor Support -# -# CONFIG_CPU_SUBTYPE_SH7300 is not set +# CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set # CONFIG_CPU_SUBTYPE_SH7705 is not set # CONFIG_CPU_SUBTYPE_SH7706 is not set # CONFIG_CPU_SUBTYPE_SH7707 is not set @@ -153,10 +125,8 @@ CONFIG_CPU_SH3=y # CONFIG_CPU_SUBTYPE_SH7709 is not set # CONFIG_CPU_SUBTYPE_SH7710 is not set CONFIG_CPU_SUBTYPE_SH7712=y - -# -# SH-4 Processor Support -# +# CONFIG_CPU_SUBTYPE_SH7720 is not set +# CONFIG_CPU_SUBTYPE_SH7721 is not set # CONFIG_CPU_SUBTYPE_SH7750 is not set # CONFIG_CPU_SUBTYPE_SH7091 is not set # CONFIG_CPU_SUBTYPE_SH7750R is not set @@ -165,37 +135,37 @@ CONFIG_CPU_SUBTYPE_SH7712=y # CONFIG_CPU_SUBTYPE_SH7751R is not set # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set - -# -# ST40 Processor Support -# -# CONFIG_CPU_SUBTYPE_ST40STB1 is not set -# CONFIG_CPU_SUBTYPE_ST40GX1 is not set - -# -# SH-4A Processor Support -# +# CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set # CONFIG_CPU_SUBTYPE_SH7785 is not set - -# -# SH4AL-DSP Processor Support -# -# CONFIG_CPU_SUBTYPE_SH73180 is not set +# CONFIG_CPU_SUBTYPE_SHX3 is not set # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set +# CONFIG_CPU_SUBTYPE_SH7366 is not set +# CONFIG_CPU_SUBTYPE_SH5_101 is not set +# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options # +CONFIG_QUICKLIST=y CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 CONFIG_MEMORY_START=0x0c000000 CONFIG_MEMORY_SIZE=0x02000000 +CONFIG_29BIT=y CONFIG_VSYSCALL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_MAX_ACTIVE_REGIONS=1 +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y @@ -203,21 +173,21 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPARSEMEM_STATIC=y +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=2 # # Cache configuration # # CONFIG_SH_DIRECT_MAPPED is not set -# CONFIG_SH_WRITETHROUGH is not set -# CONFIG_SH_OCRAM is not set -CONFIG_CF_ENABLER=y -# CONFIG_CF_AREA5 is not set -CONFIG_CF_AREA6=y -CONFIG_CF_BASE_ADDR=0xb8000000 +CONFIG_CACHE_WRITEBACK=y +# CONFIG_CACHE_WRITETHROUGH is not set +# CONFIG_CACHE_OFF is not set # # Processor features @@ -230,6 +200,14 @@ CONFIG_CPU_LITTLE_ENDIAN=y CONFIG_CPU_HAS_INTEVT=y CONFIG_CPU_HAS_IPR_IRQ=y CONFIG_CPU_HAS_SR_RB=y +CONFIG_CPU_HAS_DSP=y + +# +# Board support +# +CONFIG_SOLUTION_ENGINE=y +CONFIG_SH_SOLUTION_ENGINE=y +# CONFIG_SH_AP325RXA is not set # # Timer and clock configuration @@ -237,6 +215,10 @@ CONFIG_CPU_HAS_SR_RB=y CONFIG_SH_TMU=y CONFIG_SH_TIMER_IRQ=16 CONFIG_SH_PCLK_FREQ=66666666 +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # # CPU Frequency scaling @@ -251,7 +233,6 @@ CONFIG_SH_PCLK_FREQ=66666666 # # Companion Chips # -# CONFIG_HD6446X_SERIES is not set # # Additional SuperH Device Drivers @@ -267,47 +248,39 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set # CONFIG_KEXEC is not set -# CONFIG_SMP is not set +# CONFIG_CRASH_DUMP is not set # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set +CONFIG_GUSA=y +# CONFIG_GUSA_RB is not set # # Boot options # CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x00800000 -# CONFIG_UBC_WAKEUP is not set CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1" # # Bus options # -# CONFIG_PCI is not set - -# -# PCCARD (PCMCIA/CardBus) support -# +CONFIG_CF_ENABLER=y +# CONFIG_CF_AREA5 is not set +CONFIG_CF_AREA6=y +CONFIG_CF_BASE_ADDR=0xb8000000 +# CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set -# -# PCI Hotplug Support -# - # # Executable file formats # CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_FLAT is not set # CONFIG_BINFMT_MISC is not set -# -# Power management options (EXPERIMENTAL) -# -# CONFIG_PM is not set - # # Networking # @@ -316,7 +289,6 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -324,6 +296,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set CONFIG_NET_KEY=y # CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y @@ -334,11 +307,10 @@ CONFIG_ASK_IP_FIB_HASH=y CONFIG_IP_FIB_HASH=y CONFIG_IP_MULTIPLE_TABLES=y CONFIG_IP_ROUTE_MULTIPATH=y -# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set CONFIG_IP_ROUTE_VERBOSE=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set +CONFIG_IP_PNP_BOOTP=y # CONFIG_IP_PNP_RARP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set @@ -355,30 +327,17 @@ CONFIG_INET_TUNNEL=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set # CONFIG_INET_DIAG is not set # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -391,15 +350,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# CONFIG_NET_SCHED=y -CONFIG_NET_SCH_FIFO=y -CONFIG_NET_SCH_CLK_JIFFIES=y -# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set -# CONFIG_NET_SCH_CLK_CPU is not set # # Queueing/Scheduling @@ -408,6 +359,7 @@ CONFIG_NET_SCH_CBQ=y CONFIG_NET_SCH_HTB=y CONFIG_NET_SCH_HFSC=y CONFIG_NET_SCH_PRIO=y +# CONFIG_NET_SCH_RR is not set CONFIG_NET_SCH_RED=y CONFIG_NET_SCH_SFQ=y CONFIG_NET_SCH_TEQL=y @@ -415,7 +367,6 @@ CONFIG_NET_SCH_TBF=y CONFIG_NET_SCH_GRED=y CONFIG_NET_SCH_DSMARK=y CONFIG_NET_SCH_NETEM=y -CONFIG_NET_SCH_INGRESS=y # # Classification @@ -429,22 +380,33 @@ CONFIG_NET_CLS_FW=y # CONFIG_NET_CLS_U32 is not set # CONFIG_NET_CLS_RSVP is not set # CONFIG_NET_CLS_RSVP6 is not set +# CONFIG_NET_CLS_FLOW is not set # CONFIG_NET_EMATCH is not set # CONFIG_NET_CLS_ACT is not set -# CONFIG_NET_CLS_POLICE is not set CONFIG_NET_CLS_IND=y -CONFIG_NET_ESTIMATOR=y +CONFIG_NET_SCH_FIFO=y # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set -# CONFIG_IEEE80211 is not set +# CONFIG_AF_RXRPC is not set CONFIG_FIB_RULES=y +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + # # Device Drivers # @@ -452,27 +414,21 @@ CONFIG_FIB_RULES=y # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -485,6 +441,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -510,7 +467,6 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access @@ -533,44 +489,25 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# # CONFIG_MTD_NAND is not set - -# -# OneNAND Flash Device Drivers -# # CONFIG_MTD_ONENAND is not set # -# Parallel port support +# UBI - Unsorted block images # +# CONFIG_MTD_UBI is not set # CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNPACPI is not set - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# Misc devices -# - -# -# ATA/ATAPI/MFM/RLL support -# +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -578,6 +515,7 @@ CONFIG_MTD_CFI_UTIL=y # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y +CONFIG_SCSI_DMA=y # CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y @@ -599,6 +537,7 @@ CONFIG_BLK_DEV_SD=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports @@ -606,94 +545,72 @@ CONFIG_BLK_DEV_SD=y # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_DEBUG is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y +CONFIG_ATA_SFF=y +# CONFIG_SATA_MV is not set CONFIG_PATA_PLATFORM=y - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Network device support -# CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# PHY device support -# - -# -# Ethernet (10 or 100Mbit) -# -# CONFIG_NET_ETHERNET is not set - -# -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_FIXED_PHY is not set +CONFIG_MDIO_BITBANG=y +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_STNIC is not set +CONFIG_SH_ETH=y +# CONFIG_SMC91X is not set +# CONFIG_SMC911X is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +CONFIG_NETDEV_1000=y +# CONFIG_E1000E_ENABLED is not set +CONFIG_NETDEV_10000=y + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -711,6 +628,7 @@ CONFIG_NETDEVICES=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -728,99 +646,78 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=m -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set - -# -# I2C support -# # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# # CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set # -# Hardware Monitoring support +# Sonics Silicon Backplane # -# CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set # -# Digital Video Broadcasting Devices +# Multimedia drivers # -# CONFIG_DVB is not set +# CONFIG_DAB is not set # # Graphics support # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set # CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Sound +# Display device support # -# CONFIG_SOUND is not set +# CONFIG_DISPLAY_SUPPORT is not set # -# USB support +# Sound # -# CONFIG_USB_ARCH_HAS_HCD is not set +# CONFIG_SOUND is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# # CONFIG_MMC is not set - -# -# LED devices -# +# CONFIG_MEMSTICK is not set CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y @@ -834,40 +731,10 @@ CONFIG_LEDS_CLASS=y CONFIG_LEDS_TRIGGERS=y # CONFIG_LEDS_TRIGGER_TIMER is not set # CONFIG_LEDS_TRIGGER_HEARTBEAT is not set - -# -# InfiniBand support -# - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# +# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# Auxiliary Display support -# - -# -# Virtualization -# +# CONFIG_UIO is not set # # File systems @@ -877,20 +744,21 @@ CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y # CONFIG_EXT2_FS_XIP is not set -# CONFIG_EXT3_FS is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set # CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +# CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set # CONFIG_QUOTA is not set -# CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -919,7 +787,6 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -935,68 +802,67 @@ CONFIG_RAMFS=y CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set # CONFIG_JFFS2_SUMMARY is not set # CONFIG_JFFS2_FS_XATTR is not set # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# -# CONFIG_NFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_V4 is not set # CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# # CONFIG_NLS is not set - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set -# -# Profiling support -# -# CONFIG_PROFILING is not set - # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set -CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DETECT_SOFTLOCKUP is not set +CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set @@ -1004,21 +870,28 @@ CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_MUTEXES is not set # CONFIG_DEBUG_LOCK_ALLOC is not set # CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set CONFIG_FRAME_POINTER=y -# CONFIG_FORCED_INLINING is not set +# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set +# CONFIG_DEBUG_BOOTMEM is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_4KSTACKS is not set +# CONFIG_IRQSTACKS is not set # CONFIG_SH_KGDB is not set # @@ -1026,62 +899,100 @@ CONFIG_FRAME_POINTER=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y # -# Cryptographic options +# Crypto core or helper # -CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_AUTHENC=y +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set CONFIG_CRYPTO_SHA1=y # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -CONFIG_CRYPTO_DEFLATE=y -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set # -# Hardware crypto devices +# Compression # +CONFIG_CRYPTO_DEFLATE=y +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y # # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y -- cgit v1.2.3 From 787d9d7e89c3952db12d9e4bb02ba5c5a85f6b7f Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Wed, 18 Jun 2008 18:32:03 +0900 Subject: sh: Clean up code of Solution Engine 770x Signed-off-by: Nobuhiro Iwamatsu Signed-off-by: Paul Mundt --- arch/sh/boards/se/770x/setup.c | 4 +--- include/asm-sh/se.h | 2 ++ 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/sh/boards/se/770x/setup.c b/arch/sh/boards/se/770x/setup.c index 25767cc3a50..cf4a5ba12df 100644 --- a/arch/sh/boards/se/770x/setup.c +++ b/arch/sh/boards/se/770x/setup.c @@ -14,8 +14,6 @@ #include #include -void init_se_IRQ(void); - /* * Configure the Super I/O chip */ @@ -73,7 +71,7 @@ static struct resource cf_ide_resources[] = { }, [1] = { .start = PA_MRSHPC_IO + 0x1f0 + 0x206, - .end = PA_MRSHPC_IO + 0x1f0 +8 + 0x206 + 8, + .end = PA_MRSHPC_IO + 0x1f0 + 8 + 0x206 + 8, .flags = IORESOURCE_MEM, }, [2] = { diff --git a/include/asm-sh/se.h b/include/asm-sh/se.h index 0e2f720b966..eb23000e1bb 100644 --- a/include/asm-sh/se.h +++ b/include/asm-sh/se.h @@ -91,6 +91,8 @@ #define SH_ETH1_IRQ 81 #define SH_TSU_IRQ 82 +void init_se_IRQ(void); + #define __IO_PREFIX se #include -- cgit v1.2.3 From 7c93d87d09813e32724b572530abe5b5405ab1d1 Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Thu, 19 Jun 2008 19:27:55 +0900 Subject: sh: Fix Kconfig of AP-325RXA The CPU of AP-325RXA is SH7723, but a CPU becomes selectable. This patch fixes this problem. Signed-off-by: Nobuhiro Iwamatsu Signed-off-by: Paul Mundt --- arch/sh/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 9bbb70547f5..5f84552ecb7 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -504,7 +504,7 @@ config SH_MIGOR config SH_AP325RXA bool "AP-325RXA" - select CPU_SUBTYPE_SH7723 + depends on CPU_SUBTYPE_SH7723 help Renesas "AP-325RXA" support. Compatible with ALGO SYSTEM CO.,LTD. "AP-320A" -- cgit v1.2.3 From fafb7a97de73a917a875048801bd81cf64f79e4a Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Tue, 24 Jun 2008 13:00:52 +0900 Subject: sh: Remove sh_pcic_io_xxx function from Solution Engine IO code sh_pcic_io_xxx function are very old. In linux-2.4, mrshpc_ss socket driver used this function. But there is not this driver to the present kernel. I deleted these cords and checked operation. Signed-off-by: Nobuhiro Iwamatsu Signed-off-by: Paul Mundt --- arch/sh/boards/se/770x/io.c | 59 +++++++++++---------------------------------- 1 file changed, 14 insertions(+), 45 deletions(-) diff --git a/arch/sh/boards/se/770x/io.c b/arch/sh/boards/se/770x/io.c index c4550473d4c..b1ec085b867 100644 --- a/arch/sh/boards/se/770x/io.c +++ b/arch/sh/boards/se/770x/io.c @@ -1,25 +1,13 @@ -/* $Id: io.c,v 1.7 2006/02/05 21:55:29 lethal Exp $ - * - * linux/arch/sh/kernel/io_se.c - * +/* * Copyright (C) 2000 Kazumoto Kojima * * I/O routine for Hitachi SolutionEngine. - * */ - #include #include #include #include -/* SH pcmcia io window base, start and end. */ -int sh_pcic_io_wbase = 0xb8400000; -int sh_pcic_io_start; -int sh_pcic_io_stop; -int sh_pcic_io_type; -int sh_pcic_io_dummy; - /* MS7750 requires special versions of in*, out* routines, since PC-like io ports are located at upper half byte of 16-bit word which can be accessed only with 16-bit wide. */ @@ -33,8 +21,6 @@ port2adr(unsigned int port) return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000)); else if (port >= 0x1000) return (volatile __u16 *) (PA_83902 + (port << 1)); - else if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop) - return (volatile __u16 *) (sh_pcic_io_wbase + (port &~ 1)); else return (volatile __u16 *) (PA_SUPERIO + (port << 1)); } @@ -51,32 +37,27 @@ shifted_port(unsigned long port) unsigned char se_inb(unsigned long port) { - if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop) - return *(__u8 *) (sh_pcic_io_wbase + 0x40000 + port); - else if (shifted_port(port)) - return (*port2adr(port) >> 8); + if (shifted_port(port)) + return (*port2adr(port) >> 8); else - return (*port2adr(port))&0xff; + return (*port2adr(port))&0xff; } unsigned char se_inb_p(unsigned long port) { unsigned long v; - if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop) - v = *(__u8 *) (sh_pcic_io_wbase + 0x40000 + port); - else if (shifted_port(port)) - v = (*port2adr(port) >> 8); + if (shifted_port(port)) + v = (*port2adr(port) >> 8); else - v = (*port2adr(port))&0xff; + v = (*port2adr(port))&0xff; ctrl_delay(); return v; } unsigned short se_inw(unsigned long port) { - if (port >= 0x2000 || - (sh_pcic_io_start <= port && port <= sh_pcic_io_stop)) + if (port >= 0x2000) return *port2adr(port); else maybebadio(port); @@ -91,9 +72,7 @@ unsigned int se_inl(unsigned long port) void se_outb(unsigned char value, unsigned long port) { - if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop) - *(__u8 *)(sh_pcic_io_wbase + port) = value; - else if (shifted_port(port)) + if (shifted_port(port)) *(port2adr(port)) = value << 8; else *(port2adr(port)) = value; @@ -101,9 +80,7 @@ void se_outb(unsigned char value, unsigned long port) void se_outb_p(unsigned char value, unsigned long port) { - if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop) - *(__u8 *)(sh_pcic_io_wbase + port) = value; - else if (shifted_port(port)) + if (shifted_port(port)) *(port2adr(port)) = value << 8; else *(port2adr(port)) = value; @@ -112,8 +89,7 @@ void se_outb_p(unsigned char value, unsigned long port) void se_outw(unsigned short value, unsigned long port) { - if (port >= 0x2000 || - (sh_pcic_io_start <= port && port <= sh_pcic_io_stop)) + if (port >= 0x2000) *port2adr(port) = value; else maybebadio(port); @@ -129,11 +105,7 @@ void se_insb(unsigned long port, void *addr, unsigned long count) volatile __u16 *p = port2adr(port); __u8 *ap = addr; - if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop) { - volatile __u8 *bp = (__u8 *) (sh_pcic_io_wbase + 0x40000 + port); - while (count--) - *ap++ = *bp; - } else if (shifted_port(port)) { + if (shifted_port(port)) { while (count--) *ap++ = *p >> 8; } else { @@ -160,11 +132,7 @@ void se_outsb(unsigned long port, const void *addr, unsigned long count) volatile __u16 *p = port2adr(port); const __u8 *ap = addr; - if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop) { - volatile __u8 *bp = (__u8 *) (sh_pcic_io_wbase + port); - while (count--) - *bp = *ap++; - } else if (shifted_port(port)) { + if (shifted_port(port)) { while (count--) *p = *ap++ << 8; } else { @@ -177,6 +145,7 @@ void se_outsw(unsigned long port, const void *addr, unsigned long count) { volatile __u16 *p = port2adr(port); const __u16 *ap = addr; + while (count--) *p = *ap++; } -- cgit v1.2.3 From d88a3ea6fa4c98d482240a6a85945ed448b7671d Mon Sep 17 00:00:00 2001 From: Yoshinori Sato Date: Tue, 1 Jul 2008 22:20:24 -0400 Subject: SH7619 add ethernet controler support - Add EtherC + PHY resource define. Signed-off-by: Yoshinori Sato Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/sh2/setup-sh7619.c | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) diff --git a/arch/sh/kernel/cpu/sh2/setup-sh7619.c b/arch/sh/kernel/cpu/sh2/setup-sh7619.c index cc530f4d84d..56e5878e551 100644 --- a/arch/sh/kernel/cpu/sh2/setup-sh7619.c +++ b/arch/sh/kernel/cpu/sh2/setup-sh7619.c @@ -96,8 +96,32 @@ static struct platform_device sci_device = { }, }; +static struct resource eth_resources[] = { + [0] = { + .start = 0xfb000000, + .end = 0xfb0001c8, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 85, + .end = 85, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device eth_device = { + .name = "sh-eth", + .id = -1, + .dev = { + .platform_data = (void *)1, + }, + .num_resources = ARRAY_SIZE(eth_resources), + .resource = eth_resources, +}; + static struct platform_device *sh7619_devices[] __initdata = { &sci_device, + ð_device, }; static int __init sh7619_devices_setup(void) -- cgit v1.2.3 From ef9247ef89be79ffbd9faaf722e05b7bed14fc1e Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 2 Jul 2008 13:58:38 +0900 Subject: sh: Tidy up the SH-3 exception vector table. Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/sh3/ex.S | 38 +++++++++++++++++++------------------- 1 file changed, 19 insertions(+), 19 deletions(-) diff --git a/arch/sh/kernel/cpu/sh3/ex.S b/arch/sh/kernel/cpu/sh3/ex.S index 11b6d9c6eda..dac42972689 100644 --- a/arch/sh/kernel/cpu/sh3/ex.S +++ b/arch/sh/kernel/cpu/sh3/ex.S @@ -4,7 +4,7 @@ * The SH-3 and SH-4 exception vector table. * Copyright (C) 1999, 2000, 2002 Niibe Yutaka - * Copyright (C) 2003 - 2006 Paul Mundt + * Copyright (C) 2003 - 2008 Paul Mundt * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -12,13 +12,30 @@ */ #include +#if !defined(CONFIG_MMU) +#define tlb_miss_load exception_error +#define tlb_miss_store exception_error +#define initial_page_write exception_error +#define tlb_protection_violation_load exception_error +#define tlb_protection_violation_store exception_error +#define address_error_load exception_error +#define address_error_store exception_error +#endif + +#if !defined(CONFIG_SH_FPU) +#define fpu_error_trap_handler exception_error +#endif + +#if !defined(CONFIG_KGDB_NMI) +#define kgdb_handle_exception exception_error +#endif + .align 2 .data ENTRY(exception_handling_table) .long exception_error /* 000 */ .long exception_error -#if defined(CONFIG_MMU) .long tlb_miss_load /* 040 */ .long tlb_miss_store .long initial_page_write @@ -26,30 +43,13 @@ ENTRY(exception_handling_table) .long tlb_protection_violation_store .long address_error_load .long address_error_store /* 100 */ -#else - .long exception_error ! tlb miss load /* 040 */ - .long exception_error ! tlb miss store - .long exception_error ! initial page write - .long exception_error ! tlb prot violation load - .long exception_error ! tlb prot violation store - .long exception_error ! address error load - .long exception_error ! address error store /* 100 */ -#endif -#if defined(CONFIG_SH_FPU) .long fpu_error_trap_handler /* 120 */ -#else - .long exception_error /* 120 */ -#endif .long exception_error /* 140 */ .long system_call ! Unconditional Trap /* 160 */ .long exception_error ! reserved_instruction (filled by trap_init) /* 180 */ .long exception_error ! illegal_slot_instruction (filled by trap_init) /*1A0*/ ENTRY(nmi_slot) -#if defined (CONFIG_KGDB_NMI) .long kgdb_handle_exception /* 1C0 */ ! Allow trap to debugger -#else - .long exception_none /* 1C0 */ ! Not implemented yet -#endif ENTRY(user_break_point_trap) .long break_point_trap /* 1E0 */ -- cgit v1.2.3 From 3611ee7acc113e5e482b7d20d5133935226f3129 Mon Sep 17 00:00:00 2001 From: Stuart Menefy Date: Wed, 2 Jul 2008 15:15:09 +0900 Subject: sh: Stub in silicon cut in CPU info. Signed-off-by: Stuart Menefy Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/sh4/probe.c | 3 +++ arch/sh/kernel/setup.c | 6 ++++++ include/asm-sh/processor_32.h | 1 + 3 files changed, 10 insertions(+) diff --git a/arch/sh/kernel/cpu/sh4/probe.c b/arch/sh/kernel/cpu/sh4/probe.c index be492696918..db442f37852 100644 --- a/arch/sh/kernel/cpu/sh4/probe.c +++ b/arch/sh/kernel/cpu/sh4/probe.c @@ -64,6 +64,9 @@ int __init detect_cpu_and_cache_system(void) if ((cvr & 0x20000000) == 1) boot_cpu_data.flags |= CPU_HAS_FPU; + /* We don't know the chip cut */ + boot_cpu_data.cut_major = boot_cpu_data.cut_minor = -1; + /* Mask off the upper chip ID */ pvr &= 0xffff; diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c index 9324cb91fd3..6339d0c9571 100644 --- a/arch/sh/kernel/setup.c +++ b/arch/sh/kernel/setup.c @@ -453,6 +453,12 @@ static int show_cpuinfo(struct seq_file *m, void *v) seq_printf(m, "processor\t: %d\n", cpu); seq_printf(m, "cpu family\t: %s\n", init_utsname()->machine); seq_printf(m, "cpu type\t: %s\n", get_cpu_subtype(c)); + if (c->cut_major == -1) + seq_printf(m, "cut\t\t: unknown\n"); + else if (c->cut_minor == -1) + seq_printf(m, "cut\t\t: %d.x\n", c->cut_major); + else + seq_printf(m, "cut\t\t: %d.%d\n", c->cut_major, c->cut_minor); show_cpuflags(m, c); diff --git a/include/asm-sh/processor_32.h b/include/asm-sh/processor_32.h index 81628f144fa..c6583f26707 100644 --- a/include/asm-sh/processor_32.h +++ b/include/asm-sh/processor_32.h @@ -28,6 +28,7 @@ struct sh_cpuinfo { unsigned int type; + int cut_major, cut_minor; unsigned long loops_per_jiffy; unsigned long asid_cache; -- cgit v1.2.3 From 09b5a10c1944214a6008712bfa92b29f00b84a1a Mon Sep 17 00:00:00 2001 From: Chris Smith Date: Wed, 2 Jul 2008 15:17:11 +0900 Subject: sh: Optimized flush_icache_range() implementation. Add implementation of flush_icache_range() suitable for signal handler and kprobes. Remove flush_cache_sigtramp() and change signal.c to use flush_icache_range(). Signed-off-by: Chris Smith Signed-off-by: Paul Mundt --- arch/sh/kernel/signal_32.c | 10 ++---- arch/sh/mm/cache-sh4.c | 67 ++++++++++++++++++++----------------- include/asm-sh/cpu-sh4/cacheflush.h | 1 - 3 files changed, 38 insertions(+), 40 deletions(-) diff --git a/arch/sh/kernel/signal_32.c b/arch/sh/kernel/signal_32.c index 46170a9a722..eee29257a8a 100644 --- a/arch/sh/kernel/signal_32.c +++ b/arch/sh/kernel/signal_32.c @@ -398,10 +398,7 @@ static int setup_frame(int sig, struct k_sigaction *ka, pr_debug("SIG deliver (%s:%d): sp=%p pc=%08lx pr=%08lx\n", current->comm, task_pid_nr(current), frame, regs->pc, regs->pr); - flush_cache_sigtramp(regs->pr); - - if ((-regs->pr & (L1_CACHE_BYTES-1)) < sizeof(frame->retcode)) - flush_cache_sigtramp(regs->pr + L1_CACHE_BYTES); + flush_icache_range(regs->pr, regs->pr + sizeof(frame->retcode)); return 0; @@ -486,10 +483,7 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, pr_debug("SIG deliver (%s:%d): sp=%p pc=%08lx pr=%08lx\n", current->comm, task_pid_nr(current), frame, regs->pc, regs->pr); - flush_cache_sigtramp(regs->pr); - - if ((-regs->pr & (L1_CACHE_BYTES-1)) < sizeof(frame->retcode)) - flush_cache_sigtramp(regs->pr + L1_CACHE_BYTES); + flush_icache_range(regs->pr, regs->pr + sizeof(frame->retcode)); return 0; diff --git a/arch/sh/mm/cache-sh4.c b/arch/sh/mm/cache-sh4.c index 43d7ff6b6ec..1fdc8d90254 100644 --- a/arch/sh/mm/cache-sh4.c +++ b/arch/sh/mm/cache-sh4.c @@ -4,6 +4,7 @@ * Copyright (C) 1999, 2000, 2002 Niibe Yutaka * Copyright (C) 2001 - 2007 Paul Mundt * Copyright (C) 2003 Richard Curnow + * Copyright (c) 2007 STMicroelectronics (R&D) Ltd. * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -22,6 +23,7 @@ * entirety. */ #define MAX_DCACHE_PAGES 64 /* XXX: Tune for ways */ +#define MAX_ICACHE_PAGES 32 static void __flush_dcache_segment_1way(unsigned long start, unsigned long extent); @@ -178,42 +180,45 @@ void __flush_invalidate_region(void *start, int size) /* * Write back the range of D-cache, and purge the I-cache. * - * Called from kernel/module.c:sys_init_module and routine for a.out format. + * Called from kernel/module.c:sys_init_module and routine for a.out format, + * signal handler code and kprobes code */ void flush_icache_range(unsigned long start, unsigned long end) { - flush_cache_all(); -} - -/* - * Write back the D-cache and purge the I-cache for signal trampoline. - * .. which happens to be the same behavior as flush_icache_range(). - * So, we simply flush out a line. - */ -void __uses_jump_to_uncached flush_cache_sigtramp(unsigned long addr) -{ - unsigned long v, index; - unsigned long flags; + int icacheaddr; + unsigned long flags, v; int i; - v = addr & ~(L1_CACHE_BYTES-1); - asm volatile("ocbwb %0" - : /* no output */ - : "m" (__m(v))); - - index = CACHE_IC_ADDRESS_ARRAY | - (v & boot_cpu_data.icache.entry_mask); - - local_irq_save(flags); - jump_to_uncached(); - - for (i = 0; i < boot_cpu_data.icache.ways; - i++, index += boot_cpu_data.icache.way_incr) - ctrl_outl(0, index); /* Clear out Valid-bit */ - - back_to_cached(); - wmb(); - local_irq_restore(flags); + /* If there are too many pages then just blow the caches */ + if (((end - start) >> PAGE_SHIFT) >= MAX_ICACHE_PAGES) { + flush_cache_all(); + } else { + /* selectively flush d-cache then invalidate the i-cache */ + /* this is inefficient, so only use for small ranges */ + start &= ~(L1_CACHE_BYTES-1); + end += L1_CACHE_BYTES-1; + end &= ~(L1_CACHE_BYTES-1); + + local_irq_save(flags); + jump_to_uncached(); + + for (v = start; v < end; v+=L1_CACHE_BYTES) { + asm volatile("ocbwb %0" + : /* no output */ + : "m" (__m(v))); + + icacheaddr = CACHE_IC_ADDRESS_ARRAY | ( + v & cpu_data->icache.entry_mask); + + for (i = 0; i < cpu_data->icache.ways; + i++, icacheaddr += cpu_data->icache.way_incr) + /* Clear i-cache line valid-bit */ + ctrl_outl(0, icacheaddr); + } + + back_to_cached(); + local_irq_restore(flags); + } } static inline void flush_cache_4096(unsigned long start, diff --git a/include/asm-sh/cpu-sh4/cacheflush.h b/include/asm-sh/cpu-sh4/cacheflush.h index 5fd5c89ef86..065306d376e 100644 --- a/include/asm-sh/cpu-sh4/cacheflush.h +++ b/include/asm-sh/cpu-sh4/cacheflush.h @@ -30,7 +30,6 @@ void flush_dcache_page(struct page *pg); #define flush_dcache_mmap_unlock(mapping) do { } while (0) void flush_icache_range(unsigned long start, unsigned long end); -void flush_cache_sigtramp(unsigned long addr); void flush_icache_user_range(struct vm_area_struct *vma, struct page *page, unsigned long addr, int len); -- cgit v1.2.3 From 068f59143d821553e7a55cdbd69142b05e245d47 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Wed, 2 Jul 2008 17:46:40 +0900 Subject: sh: Record the major cut revision for probed SH-4A parts. Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/sh4/probe.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/arch/sh/kernel/cpu/sh4/probe.c b/arch/sh/kernel/cpu/sh4/probe.c index db442f37852..2e42572b1b1 100644 --- a/arch/sh/kernel/cpu/sh4/probe.c +++ b/arch/sh/kernel/cpu/sh4/probe.c @@ -50,23 +50,24 @@ int __init detect_cpu_and_cache_system(void) boot_cpu_data.dcache.ways = 1; boot_cpu_data.dcache.linesz = L1_CACHE_BYTES; + /* We don't know the chip cut */ + boot_cpu_data.cut_major = boot_cpu_data.cut_minor = -1; + /* * Setup some generic flags we can probe on SH-4A parts */ - if (((pvr >> 24) & 0xff) == 0x10) { + if (((pvr >> 16) & 0xff) == 0x10) { if ((cvr & 0x10000000) == 0) boot_cpu_data.flags |= CPU_HAS_DSP; boot_cpu_data.flags |= CPU_HAS_LLSC; + boot_cpu_data.cut_major = pvr & 0x7f; } /* FPU detection works for everyone */ if ((cvr & 0x20000000) == 1) boot_cpu_data.flags |= CPU_HAS_FPU; - /* We don't know the chip cut */ - boot_cpu_data.cut_major = boot_cpu_data.cut_minor = -1; - /* Mask off the upper chip ID */ pvr &= 0xffff; -- cgit v1.2.3 From f2fb4e4f647dabf1177d3ce164988e73482d76b1 Mon Sep 17 00:00:00 2001 From: Stuart Menefy Date: Wed, 2 Jul 2008 17:51:23 +0900 Subject: sh: Conditionally re-enable IRQs in fault path. The current kernel behaviour is to reenable interrupts unconditionally when taking a page fault. This patch changes this to only enable them if interrupts were previously enabled. It also fixes a problem seen with this fix in place: the kernel previously flushed the vsyscall page when handling a signal, which is not only unncessary, but caused a possible sleep with interrupts disabled. Signed-off-by: Stuart Menefy Signed-off-by: Paul Mundt --- arch/sh/kernel/signal_32.c | 3 +-- arch/sh/mm/fault_32.c | 12 ++++++++---- 2 files changed, 9 insertions(+), 6 deletions(-) diff --git a/arch/sh/kernel/signal_32.c b/arch/sh/kernel/signal_32.c index eee29257a8a..4bbbde895a5 100644 --- a/arch/sh/kernel/signal_32.c +++ b/arch/sh/kernel/signal_32.c @@ -373,6 +373,7 @@ static int setup_frame(int sig, struct k_sigaction *ka, err |= __put_user(OR_R0_R0, &frame->retcode[6]); err |= __put_user((__NR_sigreturn), &frame->retcode[7]); regs->pr = (unsigned long) frame->retcode; + flush_icache_range(regs->pr, regs->pr + sizeof(frame->retcode)); } if (err) @@ -398,8 +399,6 @@ static int setup_frame(int sig, struct k_sigaction *ka, pr_debug("SIG deliver (%s:%d): sp=%p pc=%08lx pr=%08lx\n", current->comm, task_pid_nr(current), frame, regs->pc, regs->pr); - flush_icache_range(regs->pr, regs->pr + sizeof(frame->retcode)); - return 0; give_sigsegv: diff --git a/arch/sh/mm/fault_32.c b/arch/sh/mm/fault_32.c index d1fa27594c6..0c776fdfbdd 100644 --- a/arch/sh/mm/fault_32.c +++ b/arch/sh/mm/fault_32.c @@ -37,16 +37,12 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs, int fault; siginfo_t info; - trace_hardirqs_on(); - local_irq_enable(); - #ifdef CONFIG_SH_KGDB if (kgdb_nofault && kgdb_bus_err_hook) kgdb_bus_err_hook(); #endif tsk = current; - mm = tsk->mm; si_code = SEGV_MAPERR; if (unlikely(address >= TASK_SIZE)) { @@ -88,6 +84,14 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs, return; } + /* Only enable interrupts if they were on before the fault */ + if ((regs->sr & SR_IMASK) != SR_IMASK) { + trace_hardirqs_on(); + local_irq_enable(); + } + + mm = tsk->mm; + /* * If we're in an interrupt or have no user * context, we must not take the fault.. -- cgit v1.2.3 From f12ae6bc4ad0054386b380dbf90e63617cd5ab92 Mon Sep 17 00:00:00 2001 From: Yoshinori Sato Date: Fri, 4 Jul 2008 12:54:51 +0900 Subject: sh: Fix up link error on SH-2 zImage with older binutils. Signed-off-by: Yoshinori Sato Signed-off-by: Paul Mundt --- arch/sh/boot/compressed/Makefile_32 | 5 ++--- arch/sh/boot/compressed/Makefile_64 | 5 ++--- arch/sh/boot/compressed/piggy.S | 8 ++++++++ arch/sh/boot/compressed/vmlinux.scr | 9 --------- 4 files changed, 12 insertions(+), 15 deletions(-) create mode 100644 arch/sh/boot/compressed/piggy.S delete mode 100644 arch/sh/boot/compressed/vmlinux.scr diff --git a/arch/sh/boot/compressed/Makefile_32 b/arch/sh/boot/compressed/Makefile_32 index c0d25fb1aa6..47685f618ae 100644 --- a/arch/sh/boot/compressed/Makefile_32 +++ b/arch/sh/boot/compressed/Makefile_32 @@ -35,8 +35,7 @@ $(obj)/vmlinux.bin: vmlinux FORCE $(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE $(call if_changed,gzip) -LDFLAGS_piggy.o := -r --format binary --oformat elf32-sh-linux -T OBJCOPYFLAGS += -R .empty_zero_page -$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.gz FORCE - $(call if_changed,ld) +$(obj)/piggy.o: $(obj)/piggy.S $(obj)/vmlinux.bin.gz FORCE + $(call if_changed,as_o_S) diff --git a/arch/sh/boot/compressed/Makefile_64 b/arch/sh/boot/compressed/Makefile_64 index 912f3e205a0..658d4f91555 100644 --- a/arch/sh/boot/compressed/Makefile_64 +++ b/arch/sh/boot/compressed/Makefile_64 @@ -37,8 +37,7 @@ $(obj)/vmlinux.bin: vmlinux FORCE $(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE $(call if_changed,gzip) -LDFLAGS_piggy.o := -r --format binary --oformat elf32-sh64-linux -T OBJCOPYFLAGS += -R .empty_zero_page -$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.gz FORCE - $(call if_changed,ld) +$(obj)/piggy.o: $(obj)/piggy.S $(obj)/vmlinux.bin.gz FORCE + $(call if_changed,as_o_S) diff --git a/arch/sh/boot/compressed/piggy.S b/arch/sh/boot/compressed/piggy.S new file mode 100644 index 00000000000..566071926b1 --- /dev/null +++ b/arch/sh/boot/compressed/piggy.S @@ -0,0 +1,8 @@ + .global input_len, input_data + .data +input_len: + .long input_data_end - input_data +input_data: + .incbin "arch/sh/boot/compressed/vmlinux.bin.gz" +input_data_end: + .end diff --git a/arch/sh/boot/compressed/vmlinux.scr b/arch/sh/boot/compressed/vmlinux.scr deleted file mode 100644 index 1ed9d791f86..00000000000 --- a/arch/sh/boot/compressed/vmlinux.scr +++ /dev/null @@ -1,9 +0,0 @@ -SECTIONS -{ - .data : { - input_len = .; - LONG(input_data_end - input_data) input_data = .; - *(.data) - input_data_end = .; - } -} -- cgit v1.2.3 From 6bdfb22a8e1ffa37ae4ad35b87cb02958d1901e5 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Fri, 4 Jul 2008 12:37:12 +0900 Subject: sh: add interrupt ack code to sh4a This patch is based on interrupt acknowledge code for external interrupt sources on sh3 processors and adds on sh4a processors. Signed-off-by: Yoshihiro Shimoda Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/irq/intc.c | 31 +++++++++++++++++++++++-------- arch/sh/kernel/cpu/sh4a/setup-sh7366.c | 10 ++++++++-- arch/sh/kernel/cpu/sh4a/setup-sh7722.c | 10 ++++++++-- arch/sh/kernel/cpu/sh4a/setup-sh7723.c | 10 ++++++++-- arch/sh/kernel/cpu/sh4a/setup-sh7763.c | 11 ++++++++--- arch/sh/kernel/cpu/sh4a/setup-sh7780.c | 11 ++++++++--- arch/sh/kernel/cpu/sh4a/setup-sh7785.c | 17 +++++++++++------ include/asm-sh/hw_irq.h | 4 ++-- 8 files changed, 76 insertions(+), 28 deletions(-) diff --git a/arch/sh/kernel/cpu/irq/intc.c b/arch/sh/kernel/cpu/irq/intc.c index da5dae78788..8c70e201bde 100644 --- a/arch/sh/kernel/cpu/irq/intc.c +++ b/arch/sh/kernel/cpu/irq/intc.c @@ -62,7 +62,7 @@ struct intc_desc_int { #endif static unsigned int intc_prio_level[NR_IRQS]; /* for now */ -#ifdef CONFIG_CPU_SH3 +#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A) static unsigned long ack_handle[NR_IRQS]; #endif @@ -231,7 +231,7 @@ static void intc_disable(unsigned int irq) } } -#ifdef CONFIG_CPU_SH3 +#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A) static void intc_mask_ack(unsigned int irq) { struct intc_desc_int *d = get_intc_desc(irq); @@ -244,8 +244,23 @@ static void intc_mask_ack(unsigned int irq) if (handle) { addr = INTC_REG(d, _INTC_ADDR_D(handle), 0); - ctrl_inb(addr); - ctrl_outb(0x3f ^ set_field(0, 1, handle), addr); + switch (_INTC_FN(handle)) { + case REG_FN_MODIFY_BASE + 0: /* 8bit */ + ctrl_inb(addr); + ctrl_outb(0xff ^ set_field(0, 1, handle), addr); + break; + case REG_FN_MODIFY_BASE + 1: /* 16bit */ + ctrl_inw(addr); + ctrl_outw(0xffff ^ set_field(0, 1, handle), addr); + break; + case REG_FN_MODIFY_BASE + 3: /* 32bit */ + ctrl_inl(addr); + ctrl_outl(0xffffffff ^ set_field(0, 1, handle), addr); + break; + default: + BUG(); + break; + } } } #endif @@ -466,7 +481,7 @@ static unsigned int __init intc_prio_data(struct intc_desc *desc, return 0; } -#ifdef CONFIG_CPU_SH3 +#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A) static unsigned int __init intc_ack_data(struct intc_desc *desc, struct intc_desc_int *d, intc_enum enum_id) @@ -601,7 +616,7 @@ static void __init intc_register_irq(struct intc_desc *desc, /* irq should be disabled by default */ d->chip.mask(irq); -#ifdef CONFIG_CPU_SH3 +#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A) if (desc->ack_regs) ack_handle[irq] = intc_ack_data(desc, d, enum_id); #endif @@ -635,7 +650,7 @@ void __init register_intc_controller(struct intc_desc *desc) d->nr_reg += desc->prio_regs ? desc->nr_prio_regs * 2 : 0; d->nr_reg += desc->sense_regs ? desc->nr_sense_regs : 0; -#ifdef CONFIG_CPU_SH3 +#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A) d->nr_reg += desc->ack_regs ? desc->nr_ack_regs : 0; #endif d->reg = alloc_bootmem(d->nr_reg * sizeof(*d->reg)); @@ -676,7 +691,7 @@ void __init register_intc_controller(struct intc_desc *desc) d->chip.mask_ack = intc_disable; d->chip.set_type = intc_set_sense; -#ifdef CONFIG_CPU_SH3 +#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A) if (desc->ack_regs) { for (i = 0; i < desc->nr_ack_regs; i++) k += save_reg(d, k, desc->ack_regs[i].set_reg, 0); diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c index f26b5cdad0d..f97ea8e0acf 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c @@ -163,8 +163,14 @@ static struct intc_sense_reg sense_registers[] __initdata = { { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } }, }; -static DECLARE_INTC_DESC(intc_desc, "sh7366", vectors, groups, - mask_registers, prio_registers, sense_registers); +static struct intc_mask_reg ack_registers[] __initdata = { + { 0xa4140024, 0, 8, /* INTREQ00 */ + { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } }, +}; + +static DECLARE_INTC_DESC_ACK(intc_desc, "sh7366", vectors, groups, + mask_registers, prio_registers, sense_registers, + ack_registers); void __init plat_irq_setup(void) { diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c index 62ebccf18b3..d8617b669fa 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c @@ -229,8 +229,14 @@ static struct intc_sense_reg sense_registers[] __initdata = { { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } }, }; -static DECLARE_INTC_DESC(intc_desc, "sh7722", vectors, groups, - mask_registers, prio_registers, sense_registers); +static struct intc_mask_reg ack_registers[] __initdata = { + { 0xa4140024, 0, 8, /* INTREQ00 */ + { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } }, +}; + +static DECLARE_INTC_DESC_ACK(intc_desc, "sh7722", vectors, groups, + mask_registers, prio_registers, sense_registers, + ack_registers); void __init plat_irq_setup(void) { diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c index a0470f2f547..abd1ca03f39 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c @@ -326,8 +326,14 @@ static struct intc_sense_reg sense_registers[] __initdata = { { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } }, }; -static DECLARE_INTC_DESC(intc_desc, "sh7723", vectors, groups, - mask_registers, prio_registers, sense_registers); +static struct intc_mask_reg ack_registers[] __initdata = { + { 0xa4140024, 0, 8, /* INTREQ00 */ + { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } }, +}; + +static DECLARE_INTC_DESC_ACK(intc_desc, "sh7723", vectors, groups, + mask_registers, prio_registers, sense_registers, + ack_registers); void __init plat_irq_setup(void) { diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c index 3b278df8a53..3c5b629887a 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c @@ -296,9 +296,14 @@ static struct intc_sense_reg irq_sense_registers[] __initdata = { IRQ4, IRQ5, IRQ6, IRQ7 } }, }; -static DECLARE_INTC_DESC(intc_irq_desc, "sh7763-irq", irq_vectors, - NULL, irq_mask_registers, irq_prio_registers, - irq_sense_registers); +static struct intc_mask_reg irq_ack_registers[] __initdata = { + { 0xffd00024, 0, 32, /* INTREQ */ + { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } }, +}; + +static DECLARE_INTC_DESC_ACK(intc_irq_desc, "sh7763-irq", irq_vectors, + NULL, irq_mask_registers, irq_prio_registers, + irq_sense_registers, irq_ack_registers); /* External interrupt pins in IRL mode */ diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c index 18dbbe23fea..fb8200cc744 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c @@ -217,9 +217,14 @@ static struct intc_sense_reg irq_sense_registers[] __initdata = { IRQ4, IRQ5, IRQ6, IRQ7 } }, }; -static DECLARE_INTC_DESC(intc_irq_desc, "sh7780-irq", irq_vectors, - NULL, irq_mask_registers, irq_prio_registers, - irq_sense_registers); +static struct intc_mask_reg irq_ack_registers[] __initdata = { + { 0xffd00024, 0, 32, /* INTREQ */ + { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } }, +}; + +static DECLARE_INTC_DESC_ACK(intc_irq_desc, "sh7780-irq", irq_vectors, + NULL, irq_mask_registers, irq_prio_registers, + irq_sense_registers, irq_ack_registers); /* External interrupt pins in IRL mode */ diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c index 621e7329ec6..30baa63b24c 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c @@ -238,13 +238,18 @@ static struct intc_sense_reg sense_registers[] __initdata = { IRQ4, IRQ5, IRQ6, IRQ7 } }, }; -static DECLARE_INTC_DESC(intc_desc_irq0123, "sh7785-irq0123", vectors_irq0123, - NULL, mask_registers, prio_registers, - sense_registers); +static struct intc_mask_reg ack_registers[] __initdata = { + { 0xffd00024, 0, 32, /* INTREQ */ + { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } }, +}; + +static DECLARE_INTC_DESC_ACK(intc_desc_irq0123, "sh7785-irq0123", + vectors_irq0123, NULL, mask_registers, + prio_registers, sense_registers, ack_registers); -static DECLARE_INTC_DESC(intc_desc_irq4567, "sh7785-irq4567", vectors_irq4567, - NULL, mask_registers, prio_registers, - sense_registers); +static DECLARE_INTC_DESC_ACK(intc_desc_irq4567, "sh7785-irq4567", + vectors_irq4567, NULL, mask_registers, + prio_registers, sense_registers, ack_registers); /* External interrupt pins in IRL mode */ diff --git a/include/asm-sh/hw_irq.h b/include/asm-sh/hw_irq.h index 7438d1e21bc..d557b00111b 100644 --- a/include/asm-sh/hw_irq.h +++ b/include/asm-sh/hw_irq.h @@ -79,7 +79,7 @@ struct intc_desc { struct intc_sense_reg *sense_regs; unsigned int nr_sense_regs; char *name; -#ifdef CONFIG_CPU_SH3 +#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A) struct intc_mask_reg *ack_regs; unsigned int nr_ack_regs; #endif @@ -95,7 +95,7 @@ struct intc_desc symbol __initdata = { \ chipname, \ } -#ifdef CONFIG_CPU_SH3 +#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A) #define DECLARE_INTC_DESC_ACK(symbol, chipname, vectors, groups, \ mask_regs, prio_regs, sense_regs, ack_regs) \ struct intc_desc symbol __initdata = { \ -- cgit v1.2.3 From 7549079d846651ee24150a24f9bb3b6e06ae67db Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Sat, 5 Jul 2008 12:31:46 +0900 Subject: sh: add SuperH Mobile I2C platform data to sh7343 This patch adds platform data for two I2C channels to the sh7343. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/sh4a/setup-sh7343.c | 42 ++++++++++++++++++++++++++++++++++ 1 file changed, 42 insertions(+) diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c index 6d4f50cd4aa..612002e9b26 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c @@ -12,6 +12,46 @@ #include #include +static struct resource iic0_resources[] = { + [0] = { + .name = "IIC0", + .start = 0x04470000, + .end = 0x04470017, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 96, + .end = 99, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device iic0_device = { + .name = "i2c-sh_mobile", + .num_resources = ARRAY_SIZE(iic0_resources), + .resource = iic0_resources, +}; + +static struct resource iic1_resources[] = { + [0] = { + .name = "IIC1", + .start = 0x04750000, + .end = 0x04750017, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 44, + .end = 47, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device iic1_device = { + .name = "i2c-sh_mobile", + .num_resources = ARRAY_SIZE(iic1_resources), + .resource = iic1_resources, +}; + static struct plat_sci_port sci_platform_data[] = { { .mapbase = 0xffe00000, @@ -32,6 +72,8 @@ static struct platform_device sci_device = { }; static struct platform_device *sh7343_devices[] __initdata = { + &iic0_device, + &iic1_device, &sci_device, }; -- cgit v1.2.3 From da7d3029d1bbcd3d6489f4524056598ec030d3b0 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Sat, 5 Jul 2008 12:32:06 +0900 Subject: sh: add SuperH Mobile I2C platform data to sh7723 This patch adds platform data for the single I2C channel on sh7723. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/sh4a/setup-sh7723.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c index abd1ca03f39..1b4533bfdae 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c @@ -113,9 +113,30 @@ static struct platform_device sh7723_usb_host_device = { .resource = sh7723_usb_host_resources, }; +static struct resource iic_resources[] = { + [0] = { + .name = "IIC", + .start = 0x04470000, + .end = 0x04470017, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 96, + .end = 99, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device iic_device = { + .name = "i2c-sh_mobile", + .num_resources = ARRAY_SIZE(iic_resources), + .resource = iic_resources, +}; + static struct platform_device *sh7723_devices[] __initdata = { &sci_device, &rtc_device, + &iic_device, &sh7723_usb_host_device, }; -- cgit v1.2.3 From 0fff76f2da9dd0cd1918822cdc99d0191f9b78cf Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Sat, 5 Jul 2008 12:32:23 +0900 Subject: sh: add SuperH Mobile I2C platform data to sh7366 This patch adds platform data for the single I2C channel on sh7366. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/sh4a/setup-sh7366.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c index f97ea8e0acf..add99e4f335 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c @@ -14,6 +14,26 @@ #include #include +static struct resource iic_resources[] = { + [0] = { + .name = "IIC", + .start = 0x04470000, + .end = 0x04470017, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 96, + .end = 99, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device iic_device = { + .name = "i2c-sh_mobile", + .num_resources = ARRAY_SIZE(iic_resources), + .resource = iic_resources, +}; + static struct plat_sci_port sci_platform_data[] = { { .mapbase = 0xffe00000, @@ -34,6 +54,7 @@ static struct platform_device sci_device = { }; static struct platform_device *sh7366_devices[] __initdata = { + &iic_device, &sci_device, }; -- cgit v1.2.3 From 026953db56e6244c8c80be8e211e244ff6015992 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Sat, 5 Jul 2008 12:32:44 +0900 Subject: sh: enable I2C on the ap325rxa board This patch enables I2C on the sh7723-based ap325rxa board. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/boards/renesas/ap325rxa/setup.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/arch/sh/boards/renesas/ap325rxa/setup.c b/arch/sh/boards/renesas/ap325rxa/setup.c index e33340cafa0..f8d6d41893a 100644 --- a/arch/sh/boards/renesas/ap325rxa/setup.c +++ b/arch/sh/boards/renesas/ap325rxa/setup.c @@ -15,6 +15,7 @@ #include #include #include +#include #include static struct resource smc9118_resources[] = { @@ -83,14 +84,21 @@ static struct platform_device *ap325rxa_devices[] __initdata = { &ap325rxa_nor_flash_device }; +static struct i2c_board_info __initdata ap325rxa_i2c_devices[] = { +}; + static int __init ap325rxa_devices_setup(void) { + i2c_register_board_info(0, ap325rxa_i2c_devices, + ARRAY_SIZE(ap325rxa_i2c_devices)); + return platform_add_devices(ap325rxa_devices, ARRAY_SIZE(ap325rxa_devices)); } device_initcall(ap325rxa_devices_setup); #define MSTPCR0 (0xA4150030) +#define MSTPCR1 (0xA4150034) #define MSTPCR2 (0xA4150038) static void __init ap325rxa_setup(char **cmdline_p) @@ -100,6 +108,9 @@ static void __init ap325rxa_setup(char **cmdline_p) /* enable MERAM */ ctrl_outl(ctrl_inl(MSTPCR0) & ~0x00000001, MSTPCR0); /* bit 0 */ + + /* I2C */ + ctrl_outl(ctrl_inl(MSTPCR1) & ~0x00000200, MSTPCR1); } static struct sh_machine_vector mv_ap325rxa __initmv = { -- cgit v1.2.3 From 73382f710b83b84b3cffb1f4850f5292c12edfd2 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Sat, 5 Jul 2008 12:33:30 +0900 Subject: sh: fix pg-sh4.c build breakage in linux-next Remove inline from ptep_get_and_clean() to match with header file prototype. Makes linux-next build. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/mm/pg-sh4.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/sh/mm/pg-sh4.c b/arch/sh/mm/pg-sh4.c index 8c7a9ca7987..38870e0fc18 100644 --- a/arch/sh/mm/pg-sh4.c +++ b/arch/sh/mm/pg-sh4.c @@ -111,7 +111,7 @@ EXPORT_SYMBOL(copy_user_highpage); /* * For SH-4, we have our own implementation for ptep_get_and_clear */ -inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) +pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) { pte_t pte = *ptep; -- cgit v1.2.3 From a4e1d08491b06b17eb77c92caacd40b330ca8146 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Mon, 7 Jul 2008 21:11:51 +0900 Subject: sh: update sh7343 code updated the following codes for SH7343: - add register_intc_controller() - add EARLY_SCIF_CONSOLE_PORT - add define of CPG register Signed-off-by: Yoshihiro Shimoda Signed-off-by: Paul Mundt --- arch/sh/Kconfig.debug | 3 +- arch/sh/kernel/cpu/sh4a/setup-sh7343.c | 135 +++++++++++++++++++++++++++++++++ include/asm-sh/cpu-sh4/freq.h | 1 + 3 files changed, 138 insertions(+), 1 deletion(-) diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug index 0f454986022..36f4b1f7066 100644 --- a/arch/sh/Kconfig.debug +++ b/arch/sh/Kconfig.debug @@ -36,7 +36,8 @@ config EARLY_SCIF_CONSOLE_PORT default "0xff804000" if CPU_SUBTYPE_MXG default "0xffc30000" if CPU_SUBTYPE_SHX3 default "0xffe00000" if CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7763 || \ - CPU_SUBTYPE_SH7722 || CPU_SUBTYPE_SH7366 + CPU_SUBTYPE_SH7722 || CPU_SUBTYPE_SH7366 || \ + CPU_SUBTYPE_SH7343 default "0xffe80000" if CPU_SH4 default "0xffea0000" if CPU_SUBTYPE_SH7785 default "0xfffe8000" if CPU_SUBTYPE_SH7203 diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c index 612002e9b26..3e3b5029599 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c @@ -84,6 +84,141 @@ static int __init sh7343_devices_setup(void) } __initcall(sh7343_devices_setup); +enum { + UNUSED = 0, + + /* interrupt sources */ + IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7, + DMAC0, DMAC1, DMAC2, DMAC3, + VIO_CEUI, VIO_BEUI, VIO_VEUI, VOU, + MFI, VPU, TPU, Z3D4, USBI0, USBI1, + MMC_ERR, MMC_TRAN, MMC_FSTAT, MMC_FRDY, + DMAC4, DMAC5, DMAC_DADERR, + KEYSC, + SCIF, SCIF1, SCIF2, SCIF3, SCIF4, + SIOF0, SIOF1, SIO, + FLCTL_FLSTEI, FLCTL_FLENDI, FLCTL_FLTREQ0I, FLCTL_FLTREQ1I, + I2C0_ALI, I2C0_TACKI, I2C0_WAITI, I2C0_DTEI, + I2C1_ALI, I2C1_TACKI, I2C1_WAITI, I2C1_DTEI, + SIM_TEI, SIM_TXI, SIM_RXI, SIM_ERI, + IRDA, + SDHI0, SDHI1, SDHI2, SDHI3, + CMT, TSIF, SIU, + TMU0, TMU1, TMU2, + JPU, LCDC, + + /* interrupt groups */ + + DMAC0123, VIOVOU, MMC, DMAC45, FLCTL, I2C0, I2C1, SIM, SDHI, USB, +}; + +static struct intc_vect vectors[] __initdata = { + INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620), + INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660), + INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0), + INTC_VECT(IRQ6, 0x6c0), INTC_VECT(IRQ7, 0x6e0), + INTC_VECT(I2C1_ALI, 0x780), INTC_VECT(I2C1_TACKI, 0x7a0), + INTC_VECT(I2C1_WAITI, 0x7c0), INTC_VECT(I2C1_DTEI, 0x7e0), + INTC_VECT(DMAC0, 0x800), INTC_VECT(DMAC1, 0x820), + INTC_VECT(DMAC2, 0x840), INTC_VECT(DMAC3, 0x860), + INTC_VECT(VIO_CEUI, 0x880), INTC_VECT(VIO_BEUI, 0x8a0), + INTC_VECT(VIO_VEUI, 0x8c0), INTC_VECT(VOU, 0x8e0), + INTC_VECT(MFI, 0x900), INTC_VECT(VPU, 0x980), + INTC_VECT(TPU, 0x9a0), INTC_VECT(Z3D4, 0x9e0), + INTC_VECT(USBI0, 0xa20), INTC_VECT(USBI1, 0xa40), + INTC_VECT(MMC_ERR, 0xb00), INTC_VECT(MMC_TRAN, 0xb20), + INTC_VECT(MMC_FSTAT, 0xb40), INTC_VECT(MMC_FRDY, 0xb60), + INTC_VECT(DMAC4, 0xb80), INTC_VECT(DMAC5, 0xba0), + INTC_VECT(DMAC_DADERR, 0xbc0), INTC_VECT(KEYSC, 0xbe0), + INTC_VECT(SCIF, 0xc00), INTC_VECT(SCIF1, 0xc20), + INTC_VECT(SCIF2, 0xc40), INTC_VECT(SCIF3, 0xc60), + INTC_VECT(SIOF0, 0xc80), INTC_VECT(SIOF1, 0xca0), + INTC_VECT(SIO, 0xd00), + INTC_VECT(FLCTL_FLSTEI, 0xd80), INTC_VECT(FLCTL_FLENDI, 0xda0), + INTC_VECT(FLCTL_FLTREQ0I, 0xdc0), INTC_VECT(FLCTL_FLTREQ1I, 0xde0), + INTC_VECT(I2C0_ALI, 0xe00), INTC_VECT(I2C0_TACKI, 0xe20), + INTC_VECT(I2C0_WAITI, 0xe40), INTC_VECT(I2C0_DTEI, 0xe60), + INTC_VECT(SDHI0, 0xe80), INTC_VECT(SDHI1, 0xea0), + INTC_VECT(SDHI2, 0xec0), INTC_VECT(SDHI3, 0xee0), + INTC_VECT(CMT, 0xf00), INTC_VECT(TSIF, 0xf20), + INTC_VECT(SIU, 0xf80), + INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420), + INTC_VECT(TMU2, 0x440), + INTC_VECT(JPU, 0x560), INTC_VECT(LCDC, 0x580), +}; + +static struct intc_group groups[] __initdata = { + INTC_GROUP(DMAC0123, DMAC0, DMAC1, DMAC2, DMAC3), + INTC_GROUP(VIOVOU, VIO_CEUI, VIO_BEUI, VIO_VEUI, VOU), + INTC_GROUP(MMC, MMC_FRDY, MMC_FSTAT, MMC_TRAN, MMC_ERR), + INTC_GROUP(DMAC45, DMAC4, DMAC5, DMAC_DADERR), + INTC_GROUP(FLCTL, FLCTL_FLSTEI, FLCTL_FLENDI, + FLCTL_FLTREQ0I, FLCTL_FLTREQ1I), + INTC_GROUP(I2C0, I2C0_ALI, I2C0_TACKI, I2C0_WAITI, I2C0_DTEI), + INTC_GROUP(I2C1, I2C1_ALI, I2C1_TACKI, I2C1_WAITI, I2C1_DTEI), + INTC_GROUP(SIM, SIM_TEI, SIM_TXI, SIM_RXI, SIM_ERI), + INTC_GROUP(SDHI, SDHI0, SDHI1, SDHI2, SDHI3), + INTC_GROUP(USB, USBI0, USBI1), +}; + +static struct intc_mask_reg mask_registers[] __initdata = { + { 0xa4080084, 0xa40800c4, 8, /* IMR1 / IMCR1 */ + { VOU, VIO_VEUI, VIO_BEUI, VIO_CEUI, DMAC3, DMAC2, DMAC1, DMAC0 } }, + { 0xa4080088, 0xa40800c8, 8, /* IMR2 / IMCR2 */ + { 0, 0, 0, VPU, 0, 0, 0, MFI } }, + { 0xa408008c, 0xa40800cc, 8, /* IMR3 / IMCR3 */ + { SIM_TEI, SIM_TXI, SIM_RXI, SIM_ERI, 0, 0, 0, IRDA } }, + { 0xa4080090, 0xa40800d0, 8, /* IMR4 / IMCR4 */ + { 0, TMU2, TMU1, TMU0, JPU, 0, 0, LCDC } }, + { 0xa4080094, 0xa40800d4, 8, /* IMR5 / IMCR5 */ + { KEYSC, DMAC_DADERR, DMAC5, DMAC4, SCIF3, SCIF2, SCIF1, SCIF } }, + { 0xa4080098, 0xa40800d8, 8, /* IMR6 / IMCR6 */ + { 0, 0, 0, SIO, Z3D4, 0, SIOF1, SIOF0 } }, + { 0xa408009c, 0xa40800dc, 8, /* IMR7 / IMCR7 */ + { I2C0_DTEI, I2C0_WAITI, I2C0_TACKI, I2C0_ALI, + FLCTL_FLTREQ1I, FLCTL_FLTREQ0I, FLCTL_FLENDI, FLCTL_FLSTEI } }, + { 0xa40800a0, 0xa40800e0, 8, /* IMR8 / IMCR8 */ + { SDHI3, SDHI2, SDHI1, SDHI0, 0, 0, 0, SIU } }, + { 0xa40800a4, 0xa40800e4, 8, /* IMR9 / IMCR9 */ + { 0, 0, 0, CMT, 0, USBI1, USBI0 } }, + { 0xa40800a8, 0xa40800e8, 8, /* IMR10 / IMCR10 */ + { MMC_FRDY, MMC_FSTAT, MMC_TRAN, MMC_ERR } }, + { 0xa40800ac, 0xa40800ec, 8, /* IMR11 / IMCR11 */ + { I2C1_DTEI, I2C1_WAITI, I2C1_TACKI, I2C1_ALI, TPU, 0, 0, TSIF } }, + { 0xa4140044, 0xa4140064, 8, /* INTMSK00 / INTMSKCLR00 */ + { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } }, +}; + +static struct intc_prio_reg prio_registers[] __initdata = { + { 0xa4080000, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2 } }, + { 0xa4080004, 0, 16, 4, /* IPRB */ { JPU, LCDC, SIM } }, + { 0xa4080010, 0, 16, 4, /* IPRE */ { DMAC0123, VIOVOU, MFI, VPU } }, + { 0xa4080014, 0, 16, 4, /* IPRF */ { KEYSC, DMAC45, USB, CMT } }, + { 0xa4080018, 0, 16, 4, /* IPRG */ { SCIF, SCIF1, SCIF2, SCIF3 } }, + { 0xa408001c, 0, 16, 4, /* IPRH */ { SIOF0, SIOF1, FLCTL, I2C0 } }, + { 0xa4080020, 0, 16, 4, /* IPRI */ { SIO, 0, TSIF, I2C1 } }, + { 0xa4080024, 0, 16, 4, /* IPRJ */ { Z3D4, 0, SIU } }, + { 0xa4080028, 0, 16, 4, /* IPRK */ { 0, MMC, 0, SDHI } }, + { 0xa408002c, 0, 16, 4, /* IPRL */ { 0, 0, TPU } }, + { 0xa4140010, 0, 32, 4, /* INTPRI00 */ + { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } }, +}; + +static struct intc_sense_reg sense_registers[] __initdata = { + { 0xa414001c, 16, 2, /* ICR1 */ + { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } }, +}; + +static struct intc_mask_reg ack_registers[] __initdata = { + { 0xa4140024, 0, 8, /* INTREQ00 */ + { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } }, +}; + +static DECLARE_INTC_DESC_ACK(intc_desc, "sh7343", vectors, groups, + mask_registers, prio_registers, sense_registers, + ack_registers); + void __init plat_irq_setup(void) { + register_intc_controller(&intc_desc); } diff --git a/include/asm-sh/cpu-sh4/freq.h b/include/asm-sh/cpu-sh4/freq.h index da46e67ae26..a898105ebab 100644 --- a/include/asm-sh/cpu-sh4/freq.h +++ b/include/asm-sh/cpu-sh4/freq.h @@ -12,6 +12,7 @@ #if defined(CONFIG_CPU_SUBTYPE_SH7722) || \ defined(CONFIG_CPU_SUBTYPE_SH7723) || \ + defined(CONFIG_CPU_SUBTYPE_SH7343) || \ defined(CONFIG_CPU_SUBTYPE_SH7366) #define FRQCR 0xa4150000 #define VCLKCR 0xa4150004 -- cgit v1.2.3 From cafd63b0076b78bc8f114abbeb724c7e5f5bfe5d Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Mon, 7 Jul 2008 21:11:54 +0900 Subject: sh: update Solution Engine 7343 updated the following codes for Solution Endine 7343: - fix compile error in arch/sh/boards/se/7343/irq.c - add nor flash physmaps - update defconfig Signed-off-by: Yoshihiro Shimoda Signed-off-by: Paul Mundt --- arch/sh/boards/se/7343/irq.c | 232 +++--------- arch/sh/boards/se/7343/setup.c | 74 +++- arch/sh/configs/se7343_defconfig | 735 +++++++++++++++++++-------------------- include/asm-sh/se7343.h | 97 +++++- 4 files changed, 561 insertions(+), 577 deletions(-) diff --git a/arch/sh/boards/se/7343/irq.c b/arch/sh/boards/se/7343/irq.c index 763f6deba81..1112e86aa93 100644 --- a/arch/sh/boards/se/7343/irq.c +++ b/arch/sh/boards/se/7343/irq.c @@ -1,202 +1,80 @@ /* - * arch/sh/boards/se/7343/irq.c + * linux/arch/sh/boards/se/7343/irq.c * + * Copyright (C) 2008 Yoshihiro Shimoda + * + * Based on linux/arch/sh/boards/se/7722/irq.c + * Copyright (C) 2007 Nobuhiro Iwamatsu + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. */ #include -#include #include +#include #include #include -#include +#include -static void -disable_intreq_irq(unsigned int irq) +static void disable_se7343_irq(unsigned int irq) { - int bit = irq - OFFCHIP_IRQ_BASE; - u16 val; - - val = ctrl_inw(PA_CPLD_IMSK); - val |= 1 << bit; - ctrl_outw(val, PA_CPLD_IMSK); + unsigned int bit = irq - SE7343_FPGA_IRQ_BASE; + ctrl_outw(ctrl_inw(PA_CPLD_IMSK) | 1 << bit, PA_CPLD_IMSK); } -static void -enable_intreq_irq(unsigned int irq) +static void enable_se7343_irq(unsigned int irq) { - int bit = irq - OFFCHIP_IRQ_BASE; - u16 val; - - val = ctrl_inw(PA_CPLD_IMSK); - val &= ~(1 << bit); - ctrl_outw(val, PA_CPLD_IMSK); + unsigned int bit = irq - SE7343_FPGA_IRQ_BASE; + ctrl_outw(ctrl_inw(PA_CPLD_IMSK) & ~(1 << bit), PA_CPLD_IMSK); } -static void -mask_and_ack_intreq_irq(unsigned int irq) -{ - disable_intreq_irq(irq); -} - -static unsigned int -startup_intreq_irq(unsigned int irq) -{ - enable_intreq_irq(irq); - return 0; -} - -static void -shutdown_intreq_irq(unsigned int irq) -{ - disable_intreq_irq(irq); -} - -static void -end_intreq_irq(unsigned int irq) -{ - if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) - enable_intreq_irq(irq); -} - -static struct hw_interrupt_type intreq_irq_type = { - .typename = "FPGA-IRQ", - .startup = startup_intreq_irq, - .shutdown = shutdown_intreq_irq, - .enable = enable_intreq_irq, - .disable = disable_intreq_irq, - .ack = mask_and_ack_intreq_irq, - .end = end_intreq_irq +static struct irq_chip se7343_irq_chip __read_mostly = { + .name = "SE7343-FPGA", + .mask = disable_se7343_irq, + .unmask = enable_se7343_irq, + .mask_ack = disable_se7343_irq, }; -static void -make_intreq_irq(unsigned int irq) -{ - disable_irq_nosync(irq); - irq_desc[irq].chip = &intreq_irq_type; - disable_intreq_irq(irq); -} - -int -shmse_irq_demux(int irq) +static void se7343_irq_demux(unsigned int irq, struct irq_desc *desc) { - int bit; - volatile u16 val; - - if (irq == IRQ5_IRQ) { - /* Read status Register */ - val = ctrl_inw(PA_CPLD_ST); - bit = ffs(val); - if (bit != 0) - return OFFCHIP_IRQ_BASE + bit - 1; + unsigned short intv = ctrl_inw(PA_CPLD_ST); + struct irq_desc *ext_desc; + unsigned int ext_irq = SE7343_FPGA_IRQ_BASE; + + intv &= (1 << SE7343_FPGA_IRQ_NR) - 1; + + while (intv) { + if (intv & 1) { + ext_desc = irq_desc + ext_irq; + handle_level_irq(ext_irq, ext_desc); + } + intv >>= 1; + ext_irq++; } - return irq; } -/* IRQ5 is multiplexed between the following sources: - * 1. PC Card socket - * 2. Extension slot - * 3. USB Controller - * 4. Serial Controller - * - * We configure IRQ5 as a cascade IRQ. - */ -static struct irqaction irq5 = { - .handler = no_action, - .mask = CPU_MASK_NONE, - .name = "IRQ5-cascade", -}; - -static struct ipr_data se7343_irq5_ipr_map[] = { - { IRQ5_IRQ, IRQ5_IPR_ADDR+2, IRQ5_IPR_POS, IRQ5_PRIORITY }, -}; -static struct ipr_data se7343_siof0_vpu_ipr_map[] = { - { SIOF0_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY }, - { VPU_IRQ, VPU_IPR_ADDR, VPU_IPR_POS, 8 }, -}; -static struct ipr_data se7343_other_ipr_map[] = { - { DMTE0_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY }, - { DMTE1_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY }, - { DMTE2_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY }, - { DMTE3_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY }, - { DMTE4_IRQ, DMA2_IPR_ADDR, DMA2_IPR_POS, DMA2_PRIORITY }, - { DMTE5_IRQ, DMA2_IPR_ADDR, DMA2_IPR_POS, DMA2_PRIORITY }, - - /* I2C block */ - { IIC0_ALI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY }, - { IIC0_TACKI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY }, - { IIC0_WAITI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY }, - { IIC0_DTEI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY }, - - { IIC1_ALI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, IIC1_PRIORITY }, - { IIC1_TACKI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, IIC1_PRIORITY }, - { IIC1_WAITI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, IIC1_PRIORITY }, - { IIC1_DTEI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, IIC1_PRIORITY }, - - /* SIOF */ - { SIOF0_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY }, - - /* SIU */ - { SIU_IRQ, SIU_IPR_ADDR, SIU_IPR_POS, SIU_PRIORITY }, - - /* VIO interrupt */ - { CEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY }, - { BEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY }, - { VEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY }, - - /*MFI interrupt*/ - - { MFI_IRQ, MFI_IPR_ADDR, MFI_IPR_POS, MFI_PRIORITY }, - - /* LCD controller */ - { LCDC_IRQ, LCDC_IPR_ADDR, LCDC_IPR_POS, LCDC_PRIORITY }, -}; - /* * Initialize IRQ setting */ -void __init -init_7343se_IRQ(void) +void __init init_7343se_IRQ(void) { - /* Setup Multiplexed interrupts */ - ctrl_outw(8, PA_CPLD_MODESET); /* Set all CPLD interrupts to active - * low. - */ - /* Mask all CPLD controller interrupts */ - ctrl_outw(0x0fff, PA_CPLD_IMSK); - - /* PC Card interrupts */ - make_intreq_irq(PC_IRQ0); - make_intreq_irq(PC_IRQ1); - make_intreq_irq(PC_IRQ2); - make_intreq_irq(PC_IRQ3); - - /* Extension Slot Interrupts */ - make_intreq_irq(EXT_IRQ0); - make_intreq_irq(EXT_IRQ1); - make_intreq_irq(EXT_IRQ2); - make_intreq_irq(EXT_IRQ3); - - /* USB Controller interrupts */ - make_intreq_irq(USB_IRQ0); - make_intreq_irq(USB_IRQ1); - - /* Serial Controller interrupts */ - make_intreq_irq(UART_IRQ0); - make_intreq_irq(UART_IRQ1); - - /* Setup all external interrupts to be active low */ - ctrl_outw(0xaaaa, INTC_ICR1); - - make_ipr_irq(se7343_irq5_ipr_map, ARRAY_SIZE(se7343_irq5_ipr_map)); - - setup_irq(IRQ5_IRQ, &irq5); - /* Set port control to use IRQ5 */ - *(u16 *)0xA4050108 &= ~0xc; - - make_ipr_irq(se7343_siof0_vpu_ipr_map, ARRAY_SIZE(se7343_siof0_vpu_ipr_map)); - - ctrl_outb(0x0f, INTC_IMCR5); /* enable SCIF IRQ */ - - make_ipr_irq(se7343_other_ipr_map, ARRAY_SIZE(se7343_other_ipr_map)); - - ctrl_outw(0x2000, PA_MRSHPC + 0x0c); /* mrshpc irq enable */ + int i; + + ctrl_outw(0, PA_CPLD_IMSK); /* disable all irqs */ + ctrl_outw(0x2000, 0xb03fffec); /* mrshpc irq enable */ + + for (i = 0; i < SE7343_FPGA_IRQ_NR; i++) + set_irq_chip_and_handler_name(SE7343_FPGA_IRQ_BASE + i, + &se7343_irq_chip, + handle_level_irq, "level"); + + set_irq_chained_handler(IRQ0_IRQ, se7343_irq_demux); + set_irq_type(IRQ0_IRQ, IRQ_TYPE_LEVEL_LOW); + set_irq_chained_handler(IRQ1_IRQ, se7343_irq_demux); + set_irq_type(IRQ1_IRQ, IRQ_TYPE_LEVEL_LOW); + set_irq_chained_handler(IRQ4_IRQ, se7343_irq_demux); + set_irq_type(IRQ4_IRQ, IRQ_TYPE_LEVEL_LOW); + set_irq_chained_handler(IRQ5_IRQ, se7343_irq_demux); + set_irq_type(IRQ5_IRQ, IRQ_TYPE_LEVEL_LOW); } diff --git a/arch/sh/boards/se/7343/setup.c b/arch/sh/boards/se/7343/setup.c index c9431b3a051..59d8d94a8c2 100644 --- a/arch/sh/boards/se/7343/setup.c +++ b/arch/sh/boards/se/7343/setup.c @@ -1,10 +1,11 @@ #include #include +#include #include #include +#include #include - -void init_7343se_IRQ(void); +#include static struct resource smc91x_resources[] = { [0] = { @@ -17,8 +18,8 @@ static struct resource smc91x_resources[] = { * shared with other devices via externel * interrupt controller in FPGA... */ - .start = EXT_IRQ2, - .end = EXT_IRQ2, + .start = SMC_IRQ, + .end = SMC_IRQ, .flags = IORESOURCE_IRQ, }, }; @@ -38,16 +39,65 @@ static struct resource heartbeat_resources[] = { }, }; +static struct heartbeat_data heartbeat_data = { + .regsize = 16, +}; + static struct platform_device heartbeat_device = { .name = "heartbeat", .id = -1, + .dev = { + .platform_data = &heartbeat_data, + }, .num_resources = ARRAY_SIZE(heartbeat_resources), .resource = heartbeat_resources, }; +static struct mtd_partition nor_flash_partitions[] = { + { + .name = "loader", + .offset = 0x00000000, + .size = 128 * 1024, + }, + { + .name = "rootfs", + .offset = MTDPART_OFS_APPEND, + .size = 31 * 1024 * 1024, + }, + { + .name = "data", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct physmap_flash_data nor_flash_data = { + .width = 2, + .parts = nor_flash_partitions, + .nr_parts = ARRAY_SIZE(nor_flash_partitions), +}; + +static struct resource nor_flash_resources[] = { + [0] = { + .start = 0x00000000, + .end = 0x01ffffff, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device nor_flash_device = { + .name = "physmap-flash", + .dev = { + .platform_data = &nor_flash_data, + }, + .num_resources = ARRAY_SIZE(nor_flash_resources), + .resource = nor_flash_resources, +}; + static struct platform_device *sh7343se_platform_devices[] __initdata = { &smc91x_device, &heartbeat_device, + &nor_flash_device, }; static int __init sh7343se_devices_setup(void) @@ -55,10 +105,23 @@ static int __init sh7343se_devices_setup(void) return platform_add_devices(sh7343se_platform_devices, ARRAY_SIZE(sh7343se_platform_devices)); } +device_initcall(sh7343se_devices_setup); +/* + * Initialize the board + */ static void __init sh7343se_setup(char **cmdline_p) { - device_initcall(sh7343se_devices_setup); + ctrl_outw(0xf900, FPGA_OUT); /* FPGA */ + + ctrl_outl(0x00001001, MSTPCR0); + ctrl_outl(0x00000000, MSTPCR1); + ctrl_outl(0xffffbfC0, MSTPCR2); /* LCDC, BEU, CEU, VEU, KEYSC */ + + ctrl_outw(0x0002, PORT_PECR); /* PORT E 1 = IRQ5 */ + ctrl_outw(0x0020, PORT_PSELD); + + printk(KERN_INFO "MS7343CP01 Setup...done\n"); } /* @@ -90,5 +153,4 @@ static struct sh_machine_vector mv_7343se __initmv = { .mv_outsl = sh7343se_outsl, .mv_init_irq = init_7343se_IRQ, - .mv_irq_demux = shmse_irq_demux, }; diff --git a/arch/sh/configs/se7343_defconfig b/arch/sh/configs/se7343_defconfig index 84c0075e2ad..7b727363844 100644 --- a/arch/sh/configs/se7343_defconfig +++ b/arch/sh/configs/se7343_defconfig @@ -1,40 +1,55 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18 -# Tue Oct 3 11:46:17 2006 +# Linux kernel version: 2.6.26-rc8 +# Mon Jul 7 13:12:45 2008 # CONFIG_SUPERH=y +CONFIG_SUPERH32=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_NO_VIRT_TO_BUS=y +CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y # CONFIG_SWAP is not set CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set -CONFIG_INITRAMFS_SOURCE="" +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_EMBEDDED=y @@ -46,33 +61,41 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set +CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y # CONFIG_SHMEM is not set -CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set # CONFIG_KMOD is not set - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set # # IO Schedulers @@ -86,62 +109,28 @@ CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" +CONFIG_CLASSIC_RCU=y # # System type # -CONFIG_SOLUTION_ENGINE=y -# CONFIG_SH_SOLUTION_ENGINE is not set -# CONFIG_SH_7751_SOLUTION_ENGINE is not set -# CONFIG_SH_7300_SOLUTION_ENGINE is not set -CONFIG_SH_7343_SOLUTION_ENGINE=y -# CONFIG_SH_73180_SOLUTION_ENGINE is not set -# CONFIG_SH_7751_SYSTEMH is not set -# CONFIG_SH_HP6XX is not set -# CONFIG_SH_EC3104 is not set -# CONFIG_SH_SATURN is not set -# CONFIG_SH_DREAMCAST is not set -# CONFIG_SH_BIGSUR is not set -# CONFIG_SH_MPC1211 is not set -# CONFIG_SH_SH03 is not set -# CONFIG_SH_SECUREEDGE5410 is not set -# CONFIG_SH_HS7751RVOIP is not set -# CONFIG_SH_7710VOIPGW is not set -# CONFIG_SH_RTS7751R2D is not set -# CONFIG_SH_R7780RP is not set -# CONFIG_SH_EDOSK7705 is not set -# CONFIG_SH_SH4202_MICRODEV is not set -# CONFIG_SH_LANDISK is not set -# CONFIG_SH_TITAN is not set -# CONFIG_SH_SHMIN is not set -# CONFIG_SH_UNKNOWN is not set - -# -# Processor selection -# CONFIG_CPU_SH4=y CONFIG_CPU_SH4A=y CONFIG_CPU_SH4AL_DSP=y - -# -# SH-2 Processor Support -# -# CONFIG_CPU_SUBTYPE_SH7604 is not set - -# -# SH-3 Processor Support -# -# CONFIG_CPU_SUBTYPE_SH7300 is not set +# CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7203 is not set +# CONFIG_CPU_SUBTYPE_SH7206 is not set +# CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set # CONFIG_CPU_SUBTYPE_SH7705 is not set # CONFIG_CPU_SUBTYPE_SH7706 is not set # CONFIG_CPU_SUBTYPE_SH7707 is not set # CONFIG_CPU_SUBTYPE_SH7708 is not set # CONFIG_CPU_SUBTYPE_SH7709 is not set # CONFIG_CPU_SUBTYPE_SH7710 is not set - -# -# SH-4 Processor Support -# +# CONFIG_CPU_SUBTYPE_SH7712 is not set +# CONFIG_CPU_SUBTYPE_SH7720 is not set +# CONFIG_CPU_SUBTYPE_SH7721 is not set # CONFIG_CPU_SUBTYPE_SH7750 is not set # CONFIG_CPU_SUBTYPE_SH7091 is not set # CONFIG_CPU_SUBTYPE_SH7750R is not set @@ -150,67 +139,88 @@ CONFIG_CPU_SH4AL_DSP=y # CONFIG_CPU_SUBTYPE_SH7751R is not set # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set - -# -# ST40 Processor Support -# -# CONFIG_CPU_SUBTYPE_ST40STB1 is not set -# CONFIG_CPU_SUBTYPE_ST40GX1 is not set - -# -# SH-4A Processor Support -# +# CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set - -# -# SH4AL-DSP Processor Support -# -# CONFIG_CPU_SUBTYPE_SH73180 is not set +# CONFIG_CPU_SUBTYPE_SH7785 is not set +# CONFIG_CPU_SUBTYPE_SHX3 is not set CONFIG_CPU_SUBTYPE_SH7343=y +# CONFIG_CPU_SUBTYPE_SH7722 is not set +# CONFIG_CPU_SUBTYPE_SH7366 is not set +# CONFIG_CPU_SUBTYPE_SH5_101 is not set +# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options # +CONFIG_QUICKLIST=y CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 CONFIG_MEMORY_START=0x0c000000 CONFIG_MEMORY_SIZE=0x01000000 -CONFIG_32BIT=y +CONFIG_29BIT=y CONFIG_VSYSCALL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_MAX_ACTIVE_REGIONS=1 +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set +# CONFIG_PAGE_SIZE_64KB is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPARSEMEM_STATIC=y +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=2 # # Cache configuration # # CONFIG_SH_DIRECT_MAPPED is not set -# CONFIG_SH_WRITETHROUGH is not set -# CONFIG_SH_OCRAM is not set +CONFIG_CACHE_WRITEBACK=y +# CONFIG_CACHE_WRITETHROUGH is not set +# CONFIG_CACHE_OFF is not set # # Processor features # CONFIG_CPU_LITTLE_ENDIAN=y -# CONFIG_SH_FPU is not set +# CONFIG_CPU_BIG_ENDIAN is not set # CONFIG_SH_FPU_EMU is not set CONFIG_SH_DSP=y # CONFIG_SH_STORE_QUEUES is not set CONFIG_CPU_HAS_INTEVT=y CONFIG_CPU_HAS_SR_RB=y +CONFIG_CPU_HAS_DSP=y + +# +# Board support +# +CONFIG_SOLUTION_ENGINE=y +CONFIG_SH_7343_SOLUTION_ENGINE=y # -# Timer support +# Timer and clock configuration # CONFIG_SH_TMU=y +CONFIG_SH_TIMER_IRQ=16 CONFIG_SH_PCLK_FREQ=27000000 +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # # CPU Frequency scaling @@ -225,56 +235,49 @@ CONFIG_SH_PCLK_FREQ=27000000 # # Companion Chips # -# CONFIG_HD6446X_SERIES is not set + +# +# Additional SuperH Device Drivers +# CONFIG_HEARTBEAT=y +# CONFIG_PUSH_SWITCH is not set # # Kernel features # # CONFIG_HZ_100 is not set CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set # CONFIG_KEXEC is not set -# CONFIG_SMP is not set +# CONFIG_CRASH_DUMP is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +CONFIG_GUSA=y # # Boot options # CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x00800000 -# CONFIG_UBC_WAKEUP is not set # CONFIG_CMDLINE_BOOL is not set # # Bus options # -# CONFIG_PCI is not set - -# -# PCCARD (PCMCIA/CardBus) support -# +# CONFIG_CF_ENABLER is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set -# -# PCI Hotplug Support -# - # # Executable file formats # CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_FLAT is not set # CONFIG_BINFMT_MISC is not set -# -# Power management options (EXPERIMENTAL) -# -# CONFIG_PM is not set - # # Networking # @@ -283,22 +286,20 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set +# CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_ARPD is not set @@ -310,29 +311,18 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_TUNNEL is not set CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set # CONFIG_INET_DIAG is not set # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -345,10 +335,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -356,9 +342,20 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -367,36 +364,32 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers # CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -422,13 +415,15 @@ CONFIG_MTD_CFI_UTIL=y CONFIG_MTD_RAM=y # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access # # CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x0 +CONFIG_MTD_PHYSMAP_LEN=0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=0 # CONFIG_MTD_PLATRAM is not set # @@ -445,130 +440,101 @@ CONFIG_MTD_RAM=y # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# # CONFIG_MTD_NAND is not set - -# -# OneNAND Flash Device Drivers -# # CONFIG_MTD_ONENAND is not set # -# Parallel port support +# UBI - Unsorted block images # +# CONFIG_MTD_UBI is not set # CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set -# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # # SCSI device support # # CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y # -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# -# CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support +# SCSI support type (disk, tape, CD-ROM) # +# CONFIG_BLK_DEV_SD is not set +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set # -# I2O device support +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs # +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m # -# Network device support +# SCSI Transports # +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# PHY device support -# +# CONFIG_VETH is not set # CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_AX88796 is not set # CONFIG_STNIC is not set CONFIG_SMC91X=y +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +CONFIG_NETDEV_1000=y +# CONFIG_E1000E_ENABLED is not set +CONFIG_NETDEV_10000=y # -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -576,13 +542,13 @@ CONFIG_SMC91X=y # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces # # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -592,6 +558,7 @@ CONFIG_INPUT=y # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -608,6 +575,7 @@ CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -626,147 +594,102 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_UNIX98_PTYS is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=y -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set - -# -# I2C support -# -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y - -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_PCA_ISA is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# +# CONFIG_I2C is not set # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set # -# Dallas's 1-wire bus +# Sonics Silicon Backplane # +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # -# Hardware Monitoring support +# Multifunction device drivers # -# CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # -# Misc devices +# Multimedia devices # # -# Multimedia devices +# Multimedia core support # CONFIG_VIDEO_DEV=y -CONFIG_VIDEO_V4L1=y +CONFIG_VIDEO_V4L2_COMMON=y +CONFIG_VIDEO_ALLOW_V4L1=y CONFIG_VIDEO_V4L1_COMPAT=y -CONFIG_VIDEO_V4L2=y - -# -# Video Capture Adapters -# +# CONFIG_DVB_CORE is not set +CONFIG_VIDEO_MEDIA=y # -# Video Capture Adapters +# Multimedia drivers # +# CONFIG_MEDIA_ATTACH is not set +CONFIG_VIDEO_V4L2=y +CONFIG_VIDEO_V4L1=y +CONFIG_VIDEO_CAPTURE_DRIVERS=y # CONFIG_VIDEO_ADV_DEBUG is not set CONFIG_VIDEO_HELPER_CHIPS_AUTO=y # CONFIG_VIDEO_VIVI is not set # CONFIG_VIDEO_CPIA is not set -# CONFIG_VIDEO_SAA5246A is not set -# CONFIG_VIDEO_SAA5249 is not set -# CONFIG_TUNER_3036 is not set - -# -# Radio Adapters -# - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set +# CONFIG_SOC_CAMERA is not set +CONFIG_RADIO_ADAPTERS=y +# CONFIG_DAB is not set # # Graphics support # -CONFIG_FIRMWARE_EDID=y +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set CONFIG_FB=y +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB_DDC is not set # CONFIG_FB_CFB_FILLRECT is not set # CONFIG_FB_CFB_COPYAREA is not set # CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set -# CONFIG_FB_EPSON1355 is not set + +# +# Frame buffer hardware drivers +# # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Console display driver support +# Display device support # -CONFIG_DUMMY_CONSOLE=y -# CONFIG_FRAMEBUFFER_CONSOLE is not set +# CONFIG_DISPLAY_SUPPORT is not set # -# Logo configuration +# Console display driver support # +CONFIG_DUMMY_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE is not set # CONFIG_LOGO is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -802,85 +725,63 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_MPU401 is not set # -# Open Sound System +# SUPERH devices # -# CONFIG_SOUND_PRIME is not set # -# USB support +# System on Chip audio support # -# CONFIG_USB_ARCH_HAS_HCD is not set -# CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_SND_SOC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# SoC Audio support for SuperH # # -# USB Gadget Support +# ALSA SoC audio for Freescale SOCs # -# CONFIG_USB_GADGET is not set # -# MMC/SD Card support +# SoC Audio for the Texas Instruments OMAP # -# CONFIG_MMC is not set # -# LED devices +# Open Sound System # +# CONFIG_SOUND_PRIME is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# +# CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# +# CONFIG_UIO is not set # # File systems # -# CONFIG_EXT2_FS is not set -# CONFIG_EXT3_FS is not set +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +# CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set # CONFIG_QUOTA is not set -# CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -909,7 +810,6 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -922,40 +822,39 @@ CONFIG_RAMFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set # CONFIG_JFFS2_SUMMARY is not set # CONFIG_JFFS2_FS_XATTR is not set # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set -# CONFIG_CRAMFS is not set +CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=y # CONFIG_NFSD_V3 is not set -# CONFIG_NFSD_TCP is not set -CONFIG_ROOT_NFS=y +# CONFIG_NFSD_V4 is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -963,56 +862,130 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# # CONFIG_NLS is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set +# CONFIG_DLM is not set # # Kernel hacking # +CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_FS is not set +# CONFIG_SAMPLES is not set # CONFIG_SH_STANDARD_BIOS is not set -# CONFIG_EARLY_SCIF_CONSOLE is not set -# CONFIG_KGDB is not set +CONFIG_EARLY_SCIF_CONSOLE=y +CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe00000 +CONFIG_EARLY_PRINTK=y +# CONFIG_SH_KGDB is not set # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set # -# Cryptographic options +# Compression # -# CONFIG_CRYPTO is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y # # Library routines # +CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/include/asm-sh/se7343.h b/include/asm-sh/se7343.h index e7914a54aa9..8d2af779fbc 100644 --- a/include/asm-sh/se7343.h +++ b/include/asm-sh/se7343.h @@ -59,24 +59,95 @@ #define PA_LCD1 0xb8000000 #define PA_LCD2 0xb8800000 +#define PORT_PACR 0xA4050100 +#define PORT_PBCR 0xA4050102 +#define PORT_PCCR 0xA4050104 +#define PORT_PDCR 0xA4050106 +#define PORT_PECR 0xA4050108 +#define PORT_PFCR 0xA405010A +#define PORT_PGCR 0xA405010C +#define PORT_PHCR 0xA405010E +#define PORT_PJCR 0xA4050110 +#define PORT_PKCR 0xA4050112 +#define PORT_PLCR 0xA4050114 +#define PORT_PMCR 0xA4050116 +#define PORT_PNCR 0xA4050118 +#define PORT_PQCR 0xA405011A +#define PORT_PRCR 0xA405011C +#define PORT_PSCR 0xA405011E +#define PORT_PTCR 0xA4050140 +#define PORT_PUCR 0xA4050142 +#define PORT_PVCR 0xA4050144 +#define PORT_PWCR 0xA4050146 +#define PORT_PYCR 0xA4050148 +#define PORT_PZCR 0xA405014A + +#define PORT_PSELA 0xA405014C +#define PORT_PSELB 0xA405014E +#define PORT_PSELC 0xA4050150 +#define PORT_PSELD 0xA4050152 +#define PORT_PSELE 0xA4050154 + +#define PORT_HIZCRA 0xA4050156 +#define PORT_HIZCRB 0xA4050158 +#define PORT_HIZCRC 0xA405015C + +#define PORT_DRVCR 0xA4050180 + +#define PORT_PADR 0xA4050120 +#define PORT_PBDR 0xA4050122 +#define PORT_PCDR 0xA4050124 +#define PORT_PDDR 0xA4050126 +#define PORT_PEDR 0xA4050128 +#define PORT_PFDR 0xA405012A +#define PORT_PGDR 0xA405012C +#define PORT_PHDR 0xA405012E +#define PORT_PJDR 0xA4050130 +#define PORT_PKDR 0xA4050132 +#define PORT_PLDR 0xA4050134 +#define PORT_PMDR 0xA4050136 +#define PORT_PNDR 0xA4050138 +#define PORT_PQDR 0xA405013A +#define PORT_PRDR 0xA405013C +#define PORT_PTDR 0xA4050160 +#define PORT_PUDR 0xA4050162 +#define PORT_PVDR 0xA4050164 +#define PORT_PWDR 0xA4050166 +#define PORT_PYDR 0xA4050168 + +#define MSTPCR0 0xA4150030 +#define MSTPCR1 0xA4150034 +#define MSTPCR2 0xA4150038 + +#define FPGA_IN 0xb1400000 +#define FPGA_OUT 0xb1400002 + #define __IO_PREFIX sh7343se #include -/* External Multiplexed interrupts */ -#define PC_IRQ0 OFFCHIP_IRQ_BASE -#define PC_IRQ1 (PC_IRQ0 + 1) -#define PC_IRQ2 (PC_IRQ1 + 1) -#define PC_IRQ3 (PC_IRQ2 + 1) +#define IRQ0_IRQ 32 +#define IRQ1_IRQ 33 +#define IRQ4_IRQ 36 +#define IRQ5_IRQ 37 + +#define SE7343_FPGA_IRQ_MRSHPC0 0 +#define SE7343_FPGA_IRQ_MRSHPC1 1 +#define SE7343_FPGA_IRQ_MRSHPC2 2 +#define SE7343_FPGA_IRQ_MRSHPC3 3 +#define SE7343_FPGA_IRQ_SMC 6 /* EXT_IRQ2 */ +#define SE7343_FPGA_IRQ_USB 8 -#define EXT_IRQ0 (PC_IRQ3 + 1) -#define EXT_IRQ1 (EXT_IRQ0 + 1) -#define EXT_IRQ2 (EXT_IRQ1 + 1) -#define EXT_IRQ3 (EXT_IRQ2 + 1) +#define SE7343_FPGA_IRQ_NR 11 +#define SE7343_FPGA_IRQ_BASE 120 -#define USB_IRQ0 (EXT_IRQ3 + 1) -#define USB_IRQ1 (USB_IRQ0 + 1) +#define MRSHPC_IRQ3 (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_MRSHPC3) +#define MRSHPC_IRQ2 (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_MRSHPC2) +#define MRSHPC_IRQ1 (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_MRSHPC1) +#define MRSHPC_IRQ0 (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_MRSHPC0) +#define SMC_IRQ (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_SMC) +#define USB_IRQ (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_USB) -#define UART_IRQ0 (USB_IRQ1 + 1) -#define UART_IRQ1 (UART_IRQ0 + 1) +/* arch/sh/boards/se/7343/irq.c */ +void init_7343se_IRQ(void); #endif /* __ASM_SH_HITACHI_SE7343_H */ -- cgit v1.2.3 From 6e80f5e8c4c685eb7bc34c3916e3d986b03f9981 Mon Sep 17 00:00:00 2001 From: Yoshinori Sato Date: Thu, 10 Jul 2008 01:20:03 +0900 Subject: sh2(A) exception handler update This patch is By sh2 - Remove duplicate code - Reduce stack usage - Cleanup and little optimize By sh2a - Add missing handler(256 to 511) - Use sh2a instructions handler Signed-off-by: Yoshinori Sato Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/sh2/entry.S | 133 ++++++++------------- arch/sh/kernel/cpu/sh2/ex.S | 15 +-- arch/sh/kernel/cpu/sh2a/Makefile | 2 +- arch/sh/kernel/cpu/sh2a/entry.S | 249 +++++++++++++++++++++++++++++++++++++++ arch/sh/kernel/cpu/sh2a/ex.S | 72 +++++++++++ arch/sh/kernel/traps_32.c | 4 + 6 files changed, 385 insertions(+), 90 deletions(-) create mode 100644 arch/sh/kernel/cpu/sh2a/entry.S create mode 100644 arch/sh/kernel/cpu/sh2a/ex.S diff --git a/arch/sh/kernel/cpu/sh2/entry.S b/arch/sh/kernel/cpu/sh2/entry.S index 0fc89069d8c..ee894e5a45e 100644 --- a/arch/sh/kernel/cpu/sh2/entry.S +++ b/arch/sh/kernel/cpu/sh2/entry.S @@ -3,7 +3,7 @@ * * The SH-2 exception entry * - * Copyright (C) 2005,2006 Yoshinori Sato + * Copyright (C) 2005-2008 Yoshinori Sato * Copyright (C) 2005 AXE,Inc. * * This file is subject to the terms and conditions of the GNU General Public @@ -36,43 +36,41 @@ OFF_TRA = (16*4+6*4) #include ENTRY(exception_handler) - ! already saved r0/r1 + ! stack + ! r0 <- point sp + ! r1 + ! pc + ! sr + ! r0 = temporary + ! r1 = vector (pseudo EXPEVT / INTEVT / TRA) mov.l r2,@-sp mov.l r3,@-sp - mov r0,r1 cli mov.l $cpu_mode,r2 mov.l @r2,r0 mov.l @(5*4,r15),r3 ! previous SR - shll2 r3 ! set "S" flag - rotl r0 ! T <- "S" flag - rotl r0 ! "S" flag is LSB - rotcr r3 ! T -> r3:b30 - shlr r3 - shlr r0 - bt/s 1f - mov.l r3,@(5*4,r15) ! copy cpu mode to SR + or r0,r3 ! set MD + tst r0,r0 + bf/s 1f ! previous mode check + mov.l r3,@(5*4,r15) ! update SR ! switch to kernel mode - mov #1,r0 - rotr r0 - rotr r0 + mov.l __md_bit,r0 mov.l r0,@r2 ! enter kernel mode mov.l $current_thread_info,r2 mov.l @r2,r2 - mov #0x20,r0 + mov #(THREAD_SIZE >> 8),r0 shll8 r0 add r2,r0 mov r15,r2 ! r2 = user stack top mov r0,r15 ! switch kernel stack - add #-4,r15 ! dummy mov.l r1,@-r15 ! TRA sts.l macl, @-r15 sts.l mach, @-r15 stc.l gbr, @-r15 - mov.l @(4*4,r2),r0 - mov.l @(5*4,r2),r1 - mov.l r1,@-r15 ! original SR + mov.l @(5*4,r2),r0 + mov.l r0,@-r15 ! original SR sts.l pr,@-r15 + mov.l @(4*4,r2),r0 mov.l r0,@-r15 ! original PC mov r2,r3 add #(4+2)*4,r3 ! rewind r0 - r3 + exception frame @@ -88,14 +86,15 @@ ENTRY(exception_handler) mov.l r6,@-r15 mov.l r5,@-r15 mov.l r4,@-r15 + mov r1,r9 ! save TRA mov r2,r8 ! copy user -> kernel stack - mov.l @r8+,r3 + mov.l @(0,r8),r3 mov.l r3,@-r15 - mov.l @r8+,r2 + mov.l @(4,r8),r2 mov.l r2,@-r15 - mov.l @r8+,r1 + mov.l @(12,r8),r1 mov.l r1,@-r15 - mov.l @r8+,r0 + mov.l @(8,r8),r0 bra 2f mov.l r0,@-r15 1: @@ -107,10 +106,11 @@ ENTRY(exception_handler) mov.l r0,@-r15 mov.l @r2+,r0 ! old R2 mov.l r0,@-r15 - mov.l @r2+,r0 ! old R1 - mov.l r0,@-r15 - mov.l @r2+,r0 ! old R0 + mov.l @(4,r2),r0 ! old R1 mov.l r0,@-r15 + mov.l @r2,r0 ! old R0 + mov.l r0,@-r15 + add #8,r2 mov.l @r2+,r3 ! old PC mov.l @r2+,r0 ! old SR add #-4,r2 ! exception frame stub (sr) @@ -135,14 +135,12 @@ ENTRY(exception_handler) mov.l r6,@-r2 mov.l r5,@-r2 mov.l r4,@-r2 + mov r1,r9 mov.l @(OFF_R0,r15),r0 mov.l @(OFF_R1,r15),r1 mov.l @(OFF_R2,r15),r2 mov.l @(OFF_R3,r15),r3 2: - mov #OFF_TRA,r8 - add r15,r8 - mov.l @r8,r9 mov #64,r8 cmp/hs r8,r9 bt interrupt_entry ! vec >= 64 is interrupt @@ -150,26 +148,14 @@ ENTRY(exception_handler) cmp/hs r8,r9 bt trap_entry ! 64 > vec >= 32 is trap -#if defined(CONFIG_SH_FPU) - mov #13,r8 - cmp/eq r8,r9 - bt 10f ! fpu - nop -#endif - mov.l 4f,r8 mov r9,r4 shll2 r9 add r9,r8 - mov.l @r8,r8 - mov #0,r9 - cmp/eq r9,r8 + mov.l @r8,r8 ! exception handler address + tst r8,r8 bf 3f mov.l 8f,r8 ! unhandled exception -#if defined(CONFIG_SH_FPU) -10: - mov.l 9f, r8 ! unhandled exception -#endif 3: mov.l 5f,r10 jmp @r8 @@ -188,10 +174,7 @@ interrupt_entry: 5: .long ret_from_exception 6: .long ret_from_irq 7: .long do_IRQ -8: .long do_exception_error -#ifdef CONFIG_SH_FPU -9: .long fpu_error_trap_handler -#endif +8: .long exception_error trap_entry: mov #0x30,r8 @@ -200,24 +183,9 @@ trap_entry: add #-0x10,r9 ! convert SH2 to SH3/4 ABI 1: shll2 r9 ! TRA - mov #OFF_TRA,r8 - add r15,r8 - mov.l r9,@r8 - mov r9,r8 -#ifdef CONFIG_TRACE_IRQFLAGS - mov.l 2f, r9 - jsr @r9 - nop -#endif - sti - bra system_call - nop + bra system_call ! jump common systemcall entry + mov r9,r8 - .align 2 -#ifdef CONFIG_TRACE_IRQFLAGS -2: .long trace_hardirqs_on -#endif - #if defined(CONFIG_SH_STANDARD_BIOS) /* Unwind the stack and jmp to the debug entry */ ENTRY(sh_bios_handler) @@ -240,7 +208,7 @@ ENTRY(sh_bios_handler) mov.l @r2,r2 stc sr,r3 mov.l r2,@r0 - mov.l r3,@r0 + mov.l r3,@(4,r0) mov.l r1,@(8,r0) mov.l @r15+, r0 mov.l @r15+, r1 @@ -272,22 +240,30 @@ ENTRY(address_error_trap_handler) mov.l 1f,r0 jmp @r0 mov #0,r5 ! writeaccess is unknown - .align 2 + .align 2 1: .long do_address_error restore_all: - cli -#ifdef CONFIG_TRACE_IRQFLAGS - mov.l 1f, r0 - jsr @r0 - nop -#endif + stc sr,r0 + or #0xf0,r0 + ldc r0,sr ! all interrupt block (same BL = 1) + ! restore special register + ! overlap exception frame + mov r15,r0 + add #17*4,r0 + lds.l @r0+,pr + add #4,r0 + ldc.l @r0+,gbr + lds.l @r0+,mach + lds.l @r0+,macl mov r15,r0 mov.l $cpu_mode,r2 mov #OFF_SR,r3 mov.l @(r0,r3),r1 - mov.l r1,@r2 + mov.l __md_bit,r3 + and r1,r3 ! copy MD bit + mov.l r3,@r2 shll2 r1 ! clear MD bit shlr2 r1 mov.l @(OFF_SP,r0),r2 @@ -297,12 +273,6 @@ restore_all: mov #OFF_PC,r3 mov.l @(r0,r3),r1 mov.l r1,@r2 ! set pc - add #4*16+4,r0 - lds.l @r0+,pr - add #4,r0 ! skip sr - ldc.l @r0+,gbr - lds.l @r0+,mach - lds.l @r0+,macl get_current_thread_info r0, r1 mov.l $current_thread_info,r1 mov.l r0,@r1 @@ -326,9 +296,8 @@ restore_all: nop .align 2 -#ifdef CONFIG_TRACE_IRQFLAGS -1: .long trace_hardirqs_off -#endif +__md_bit: + .long 0x40000000 $current_thread_info: .long __current_thread_info $cpu_mode: diff --git a/arch/sh/kernel/cpu/sh2/ex.S b/arch/sh/kernel/cpu/sh2/ex.S index 6d285af7846..85b0bf81fc1 100644 --- a/arch/sh/kernel/cpu/sh2/ex.S +++ b/arch/sh/kernel/cpu/sh2/ex.S @@ -18,16 +18,17 @@ exception_entry: no = 0 .rept 256 - mov.l r0,@-sp - mov #no,r0 + mov.l r1,@-sp bra exception_trampoline - and #0xff,r0 + mov #no,r1 no = no + 1 .endr exception_trampoline: - mov.l r1,@-sp - mov.l $exception_handler,r1 - jmp @r1 + mov.l r0,@-sp + mov.l $exception_handler,r0 + extu.b r1,r1 + jmp @r0 + extu.w r1,r1 .align 2 $exception_entry: @@ -41,6 +42,6 @@ $exception_handler: ENTRY(vbr_base) vector = 0 .rept 256 - .long exception_entry + vector * 8 + .long exception_entry + vector * 6 vector = vector + 1 .endr diff --git a/arch/sh/kernel/cpu/sh2a/Makefile b/arch/sh/kernel/cpu/sh2a/Makefile index 7e2b90cfa7b..1ab1ecf4c76 100644 --- a/arch/sh/kernel/cpu/sh2a/Makefile +++ b/arch/sh/kernel/cpu/sh2a/Makefile @@ -4,7 +4,7 @@ obj-y := common.o probe.o opcode_helper.o -common-y += $(addprefix ../sh2/, ex.o entry.o) +common-y += ex.o entry.o obj-$(CONFIG_SH_FPU) += fpu.o diff --git a/arch/sh/kernel/cpu/sh2a/entry.S b/arch/sh/kernel/cpu/sh2a/entry.S new file mode 100644 index 00000000000..47096dc3d20 --- /dev/null +++ b/arch/sh/kernel/cpu/sh2a/entry.S @@ -0,0 +1,249 @@ +/* + * arch/sh/kernel/cpu/sh2a/entry.S + * + * The SH-2A exception entry + * + * Copyright (C) 2008 Yoshinori Sato + * Based on arch/sh/kernel/cpu/sh2/entry.S + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include +#include +#include +#include +#include +#include +#include + +/* Offsets to the stack */ +OFF_R0 = 0 /* Return value. New ABI also arg4 */ +OFF_R1 = 4 /* New ABI: arg5 */ +OFF_R2 = 8 /* New ABI: arg6 */ +OFF_R3 = 12 /* New ABI: syscall_nr */ +OFF_R4 = 16 /* New ABI: arg0 */ +OFF_R5 = 20 /* New ABI: arg1 */ +OFF_R6 = 24 /* New ABI: arg2 */ +OFF_R7 = 28 /* New ABI: arg3 */ +OFF_SP = (15*4) +OFF_PC = (16*4) +OFF_SR = (16*4+2*4) +OFF_TRA = (16*4+6*4) + +#include + +ENTRY(exception_handler) + ! stack + ! r0 <- point sp + ! r1 + ! pc + ! sr + ! r0 = temporary + ! r1 = vector (pseudo EXPEVT / INTEVT / TRA) + mov.l r2,@-sp + cli + mov.l $cpu_mode,r2 + bld.b #6,@(0,r2) !previus SR.MD + bst.b #6,@(4*4,r15) !set cpu mode to SR.MD + bt 1f + ! switch to kernel mode + bset.b #6,@(0,r2) !set SR.MD + mov.l $current_thread_info,r2 + mov.l @r2,r2 + mov #(THREAD_SIZE >> 8),r0 + shll8 r0 + add r2,r0 ! r0 = kernel stack tail + mov r15,r2 ! r2 = user stack top + mov r0,r15 ! switch kernel stack + mov.l r1,@-r15 ! TRA + sts.l macl, @-r15 + sts.l mach, @-r15 + stc.l gbr, @-r15 + mov.l @(4*4,r2),r0 + mov.l r0,@-r15 ! original SR + sts.l pr,@-r15 + mov.l @(3*4,r2),r0 + mov.l r0,@-r15 ! original PC + mov r2,r0 + add #(3+2)*4,r0 ! rewind r0 - r3 + exception frame + lds r0,pr ! pr = original SP + movmu.l r3,@-r15 ! save regs + mov r2,r8 ! r8 = previus stack top + mov r1,r9 ! r9 = interrupt vector + ! restore previous stack + mov.l @r8+,r2 + mov.l @r8+,r0 + mov.l @r8+,r1 + bra 2f + movml.l r2,@-r15 +1: + ! in kernel exception + mov r15,r2 + add #-((OFF_TRA + 4) - OFF_PC) + 5*4,r15 + movmu.l r3,@-r15 + mov r2,r8 ! r8 = previous stack top + mov r1,r9 ! r9 = interrupt vector + ! restore exception frame & regs + mov.l @r8+,r2 ! old R2 + mov.l @r8+,r0 ! old R0 + mov.l @r8+,r1 ! old R1 + mov.l @r8+,r10 ! old PC + mov.l @r8+,r11 ! old SR + movml.l r2,@-r15 + mov.l r10,@(OFF_PC,r15) + mov.l r11,@(OFF_SR,r15) + mov.l r8,@(OFF_SP,r15) ! save old sp + mov r15,r8 + add #OFF_TRA + 4,r8 + mov.l r9,@-r8 + sts.l macl,@-r8 + sts.l mach,@-r8 + stc.l gbr,@-r8 + add #-4,r8 + sts.l pr,@-r8 +2: + ! dispatch exception / interrupt + mov #64,r8 + cmp/hs r8,r9 + bt interrupt_entry ! vec >= 64 is interrupt + mov #32,r8 + cmp/hs r8,r9 + bt trap_entry ! 64 > vec >= 32 is trap + + mov.l 4f,r8 + mov r9,r4 + shll2 r9 + add r9,r8 + mov.l @r8,r8 ! exception handler address + tst r8,r8 + bf 3f + mov.l 8f,r8 ! unhandled exception +3: + mov.l 5f,r10 + jmp @r8 + lds r10,pr + +interrupt_entry: + mov r9,r4 + mov r15,r5 + mov.l 7f,r8 + mov.l 6f,r9 + jmp @r8 + lds r9,pr + + .align 2 +4: .long exception_handling_table +5: .long ret_from_exception +6: .long ret_from_irq +7: .long do_IRQ +8: .long exception_error + +trap_entry: + mov #0x30,r8 + cmp/ge r8,r9 ! vector 0x20-0x2f is systemcall + bt 1f + add #-0x10,r9 ! convert SH2 to SH3/4 ABI +1: + shll2 r9 ! TRA + bra system_call ! jump common systemcall entry + mov r9,r8 + +#if defined(CONFIG_SH_STANDARD_BIOS) + /* Unwind the stack and jmp to the debug entry */ +ENTRY(sh_bios_handler) + mov r15,r0 + add #(22-4)*4-4,r0 + ldc.l @r0+,gbr + lds.l @r0+,mach + lds.l @r0+,macl + mov r15,r0 + mov.l @(OFF_SP,r0),r1 + mov.l @(OFF_SR,r2),r3 + mov.l r3,@-r1 + mov.l @(OFF_SP,r2),r3 + mov.l r3,@-r1 + mov r15,r0 + add #(22-4)*4-8,r0 + mov.l 1f,r2 + mov.l @r2,r2 + stc sr,r3 + mov.l r2,@r0 + mov.l r3,@(4,r0) + mov.l r1,@(8,r0) + movml.l @r15+,r14 + add #8,r15 + lds.l @r15+, pr + rte + mov.l @r15+,r15 + .align 2 +1: .long gdb_vbr_vector +#endif /* CONFIG_SH_STANDARD_BIOS */ + +ENTRY(address_error_trap_handler) + mov r15,r4 ! regs + mov.l @(OFF_PC,r15),r6 ! pc + mov.l 1f,r0 + jmp @r0 + mov #0,r5 ! writeaccess is unknown + + .align 2 +1: .long do_address_error + +restore_all: + stc sr,r0 + or #0xf0,r0 + ldc r0,sr ! all interrupt block (same BL = 1) + ! restore special register + ! overlap exception frame + mov r15,r0 + add #17*4,r0 + lds.l @r0+,pr + add #4,r0 + ldc.l @r0+,gbr + lds.l @r0+,mach + lds.l @r0+,macl + mov r15,r0 + mov.l $cpu_mode,r2 + bld.b #6,@(OFF_SR,r15) + bst.b #6,@(0,r2) ! save CPU mode + mov.l @(OFF_SR,r0),r1 + shll2 r1 + shlr2 r1 ! clear MD bit + mov.l @(OFF_SP,r0),r2 + add #-8,r2 + mov.l r2,@(OFF_SP,r0) ! point exception frame top + mov.l r1,@(4,r2) ! set sr + mov.l @(OFF_PC,r0),r1 + mov.l r1,@r2 ! set pc + get_current_thread_info r0, r1 + mov.l $current_thread_info,r1 + mov.l r0,@r1 + movml.l @r15+,r14 + mov.l @r15,r15 + rte + nop + + .align 2 +$current_thread_info: + .long __current_thread_info +$cpu_mode: + .long __cpu_mode + +! common exception handler +#include "../../entry-common.S" + + .data +! cpu operation mode +! bit30 = MD (compatible SH3/4) +__cpu_mode: + .long 0x40000000 + + .section .bss +__current_thread_info: + .long 0 + +ENTRY(exception_handling_table) + .space 4*32 diff --git a/arch/sh/kernel/cpu/sh2a/ex.S b/arch/sh/kernel/cpu/sh2a/ex.S new file mode 100644 index 00000000000..3ead9e63965 --- /dev/null +++ b/arch/sh/kernel/cpu/sh2a/ex.S @@ -0,0 +1,72 @@ +/* + * arch/sh/kernel/cpu/sh2a/ex.S + * + * The SH-2A exception vector table + * + * Copyright (C) 2008 Yoshinori Sato + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include + +! +! convert Exception Vector to Exception Number +! + +! exception no 0 to 255 +exception_entry0: +no = 0 + .rept 256 + mov.l r1,@-sp + bra exception_trampoline0 + mov #no,r1 +no = no + 1 + .endr +exception_trampoline0: + mov.l r0,@-sp + mov.l 1f,r0 + extu.b r1,r1 + jmp @r0 + extu.w r1,r1 + + .align 2 +1: .long exception_handler + +! exception no 256 to 511 +exception_entry1: +no = 0 + .rept 256 + mov.l r1,@-sp + bra exception_trampoline1 + mov #no,r1 +no = no + 1 + .endr +exception_trampoline1: + mov.l r0,@-sp + extu.b r1,r1 + movi20 #0x100,r0 + add r0,r1 + mov.l 1f,r0 + jmp @r0 + extu.w r1,r1 + + .align 2 +1: .long exception_handler + + ! +! Exception Vector Base +! + .align 2 +ENTRY(vbr_base) +vector = 0 + .rept 256 + .long exception_entry0 + vector * 6 +vector = vector + 1 + .endr + .rept 256 + .long exception_entry1 + vector * 6 +vector = vector + 1 + .endr diff --git a/arch/sh/kernel/traps_32.c b/arch/sh/kernel/traps_32.c index e08b3bfeb65..511a9426cec 100644 --- a/arch/sh/kernel/traps_32.c +++ b/arch/sh/kernel/traps_32.c @@ -43,6 +43,7 @@ # define TRAP_ILLEGAL_SLOT_INST 6 # define TRAP_ADDRESS_ERROR 9 # ifdef CONFIG_CPU_SH2A +# define TRAP_FPU_ERROR 13 # define TRAP_DIVZERO_ERROR 17 # define TRAP_DIVOVF_ERROR 18 # endif @@ -851,6 +852,9 @@ void __init trap_init(void) #ifdef CONFIG_CPU_SH2A set_exception_table_vec(TRAP_DIVZERO_ERROR, do_divide_error); set_exception_table_vec(TRAP_DIVOVF_ERROR, do_divide_error); +#ifdef CONFIG_SH_FPU + set_exception_table_vec(TRAP_FPU_ERROR, fpu_error_trap_handler); +#endif #endif /* Setup VBR for boot cpu */ -- cgit v1.2.3 From c901c96cc25f6143a7d2fb59c3287f868e84a69e Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 15 Jul 2008 21:51:39 +0900 Subject: sh: Export sh7343 VPU and VEU using uio_pdrv_genirq This patch exports the VPU and VEU blocks of the sh7343 to user space using the uio_pdrv_genirq platform driver. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/sh4a/setup-sh7343.c | 53 ++++++++++++++++++++++++++++++++++ 1 file changed, 53 insertions(+) diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c index 3e3b5029599..bcc4255acd8 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c @@ -11,6 +11,7 @@ #include #include #include +#include static struct resource iic0_resources[] = { [0] = { @@ -52,6 +53,56 @@ static struct platform_device iic1_device = { .resource = iic1_resources, }; +static struct uio_info vpu_platform_data = { + .name = "VPU4", + .version = "0", + .irq = 60, +}; + +static struct resource vpu_resources[] = { + [0] = { + .name = "VPU", + .start = 0xfe900000, + .end = 0xfe9022eb, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device vpu_device = { + .name = "uio_pdrv_genirq", + .id = 0, + .dev = { + .platform_data = &vpu_platform_data, + }, + .resource = vpu_resources, + .num_resources = ARRAY_SIZE(vpu_resources), +}; + +static struct uio_info veu_platform_data = { + .name = "VEU", + .version = "0", + .irq = 54, +}; + +static struct resource veu_resources[] = { + [0] = { + .name = "VEU", + .start = 0xfe920000, + .end = 0xfe9200b7, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device veu_device = { + .name = "uio_pdrv_genirq", + .id = 1, + .dev = { + .platform_data = &veu_platform_data, + }, + .resource = veu_resources, + .num_resources = ARRAY_SIZE(veu_resources), +}; + static struct plat_sci_port sci_platform_data[] = { { .mapbase = 0xffe00000, @@ -75,6 +126,8 @@ static struct platform_device *sh7343_devices[] __initdata = { &iic0_device, &iic1_device, &sci_device, + &vpu_device, + &veu_device, }; static int __init sh7343_devices_setup(void) -- cgit v1.2.3 From a55f6d2567008699d705a006f2432bf3e872b743 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 15 Jul 2008 21:52:19 +0900 Subject: sh: Export sh7722 VPU and VEU using uio_pdrv_genirq This patch exports the VPU and VEU blocks of the sh7722 to user space using the uio_pdrv_genirq platform driver. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/sh4a/setup-sh7722.c | 53 ++++++++++++++++++++++++++++++++++ 1 file changed, 53 insertions(+) diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c index d8617b669fa..39854d9413c 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c @@ -12,6 +12,7 @@ #include #include #include +#include #include static struct resource usbf_resources[] = { @@ -59,6 +60,56 @@ static struct platform_device iic_device = { .resource = iic_resources, }; +static struct uio_info vpu_platform_data = { + .name = "VPU4", + .version = "0", + .irq = 60, +}; + +static struct resource vpu_resources[] = { + [0] = { + .name = "VPU", + .start = 0xfe900000, + .end = 0xfe9022eb, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device vpu_device = { + .name = "uio_pdrv_genirq", + .id = 0, + .dev = { + .platform_data = &vpu_platform_data, + }, + .resource = vpu_resources, + .num_resources = ARRAY_SIZE(vpu_resources), +}; + +static struct uio_info veu_platform_data = { + .name = "VEU", + .version = "0", + .irq = 54, +}; + +static struct resource veu_resources[] = { + [0] = { + .name = "VEU", + .start = 0xfe920000, + .end = 0xfe9200b7, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device veu_device = { + .name = "uio_pdrv_genirq", + .id = 1, + .dev = { + .platform_data = &veu_platform_data, + }, + .resource = veu_resources, + .num_resources = ARRAY_SIZE(veu_resources), +}; + static struct plat_sci_port sci_platform_data[] = { { .mapbase = 0xffe00000, @@ -95,6 +146,8 @@ static struct platform_device *sh7722_devices[] __initdata = { &usbf_device, &iic_device, &sci_device, + &vpu_device, + &veu_device, }; static int __init sh7722_devices_setup(void) -- cgit v1.2.3 From 6874548c69d02fabb8bea12d8c0f5600c1176769 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 15 Jul 2008 21:53:33 +0900 Subject: sh: Export sh7723 VPU, VEU2H0, VEU2H1 using uio_pdrv_genirq This patch exports the VPU, VEU2H0 and VEU2H1 blocks of the sh7723 to user space using the uio_pdrv_genirq platform driver. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/sh4a/setup-sh7723.c | 79 ++++++++++++++++++++++++++++++++++ 1 file changed, 79 insertions(+) diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c index 1b4533bfdae..1f3137ad013 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c @@ -12,8 +12,84 @@ #include #include #include +#include #include +static struct uio_info vpu_platform_data = { + .name = "VPU5", + .version = "0", + .irq = 60, +}; + +static struct resource vpu_resources[] = { + [0] = { + .name = "VPU", + .start = 0xfe900000, + .end = 0xfe902807, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device vpu_device = { + .name = "uio_pdrv_genirq", + .id = 0, + .dev = { + .platform_data = &vpu_platform_data, + }, + .resource = vpu_resources, + .num_resources = ARRAY_SIZE(vpu_resources), +}; + +static struct uio_info veu0_platform_data = { + .name = "VEU", + .version = "0", + .irq = 54, +}; + +static struct resource veu0_resources[] = { + [0] = { + .name = "VEU2H0", + .start = 0xfe920000, + .end = 0xfe92027b, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device veu0_device = { + .name = "uio_pdrv_genirq", + .id = 1, + .dev = { + .platform_data = &veu0_platform_data, + }, + .resource = veu0_resources, + .num_resources = ARRAY_SIZE(veu0_resources), +}; + +static struct uio_info veu1_platform_data = { + .name = "VEU", + .version = "0", + .irq = 27, +}; + +static struct resource veu1_resources[] = { + [0] = { + .name = "VEU2H1", + .start = 0xfe924000, + .end = 0xfe92427b, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device veu1_device = { + .name = "uio_pdrv_genirq", + .id = 2, + .dev = { + .platform_data = &veu1_platform_data, + }, + .resource = veu1_resources, + .num_resources = ARRAY_SIZE(veu1_resources), +}; + static struct plat_sci_port sci_platform_data[] = { { .mapbase = 0xffe00000, @@ -138,6 +214,9 @@ static struct platform_device *sh7723_devices[] __initdata = { &rtc_device, &iic_device, &sh7723_usb_host_device, + &vpu_device, + &veu0_device, + &veu1_device, }; static int __init sh7723_devices_setup(void) -- cgit v1.2.3 From 714750dd5c6aef8e204d35ba28c1be9641418671 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 15 Jul 2008 21:55:03 +0900 Subject: sh: Export sh7366 VPU, VEU(1), VEU(2) using uio_pdrv_genirq This patch exports the VPU, VEU(1) and VEU(2) blocks of the sh7366 to user space using the uio_pdrv_genirq platform driver. While at it, fix up the VEU(2) interrupt vector. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/sh4a/setup-sh7366.c | 81 +++++++++++++++++++++++++++++++++- 1 file changed, 80 insertions(+), 1 deletion(-) diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c index add99e4f335..2a0fbc3ed9c 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c @@ -13,6 +13,7 @@ #include #include #include +#include static struct resource iic_resources[] = { [0] = { @@ -34,6 +35,81 @@ static struct platform_device iic_device = { .resource = iic_resources, }; +static struct uio_info vpu_platform_data = { + .name = "VPU5", + .version = "0", + .irq = 60, +}; + +static struct resource vpu_resources[] = { + [0] = { + .name = "VPU", + .start = 0xfe900000, + .end = 0xfe902807, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device vpu_device = { + .name = "uio_pdrv_genirq", + .id = 0, + .dev = { + .platform_data = &vpu_platform_data, + }, + .resource = vpu_resources, + .num_resources = ARRAY_SIZE(vpu_resources), +}; + +static struct uio_info veu0_platform_data = { + .name = "VEU", + .version = "0", + .irq = 54, +}; + +static struct resource veu0_resources[] = { + [0] = { + .name = "VEU(1)", + .start = 0xfe920000, + .end = 0xfe9200b7, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device veu0_device = { + .name = "uio_pdrv_genirq", + .id = 1, + .dev = { + .platform_data = &veu0_platform_data, + }, + .resource = veu0_resources, + .num_resources = ARRAY_SIZE(veu0_resources), +}; + +static struct uio_info veu1_platform_data = { + .name = "VEU", + .version = "0", + .irq = 27, +}; + +static struct resource veu1_resources[] = { + [0] = { + .name = "VEU(2)", + .start = 0xfe924000, + .end = 0xfe9240b7, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device veu1_device = { + .name = "uio_pdrv_genirq", + .id = 2, + .dev = { + .platform_data = &veu1_platform_data, + }, + .resource = veu1_resources, + .num_resources = ARRAY_SIZE(veu1_resources), +}; + static struct plat_sci_port sci_platform_data[] = { { .mapbase = 0xffe00000, @@ -56,6 +132,9 @@ static struct platform_device sci_device = { static struct platform_device *sh7366_devices[] __initdata = { &iic_device, &sci_device, + &vpu_device, + &veu0_device, + &veu1_device, }; static int __init sh7366_devices_setup(void) @@ -118,7 +197,7 @@ static struct intc_vect vectors[] __initdata = { INTC_VECT(SIU, 0xf80), INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420), INTC_VECT(TMU2, 0x440), - INTC_VECT(VEU2, 0x580), INTC_VECT(LCDC, 0x580), + INTC_VECT(VEU2, 0x560), INTC_VECT(LCDC, 0x580), }; static struct intc_group groups[] __initdata = { -- cgit v1.2.3 From 1eca5c92729a83f64826d15a9ecb1652dda54bcb Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 16 Jul 2008 19:02:54 +0900 Subject: sh: Add memory chunks to SH-Mobile UIO devices This patch adds physically contiguous memory chunks to the UIO devices. The same strategy can be used in the future for the CEU as well. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/sh4a/setup-sh7343.c | 8 ++++++++ arch/sh/kernel/cpu/sh4a/setup-sh7366.c | 12 ++++++++++++ arch/sh/kernel/cpu/sh4a/setup-sh7722.c | 8 ++++++++ arch/sh/kernel/cpu/sh4a/setup-sh7723.c | 12 ++++++++++++ arch/sh/mm/consistent.c | 30 ++++++++++++++++++++++++++++++ include/asm-sh/device.h | 5 +++++ 6 files changed, 75 insertions(+) diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c index bcc4255acd8..79ce34e19a2 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c @@ -66,6 +66,9 @@ static struct resource vpu_resources[] = { .end = 0xfe9022eb, .flags = IORESOURCE_MEM, }, + [1] = { + /* place holder for contiguous memory */ + }, }; static struct platform_device vpu_device = { @@ -91,6 +94,9 @@ static struct resource veu_resources[] = { .end = 0xfe9200b7, .flags = IORESOURCE_MEM, }, + [1] = { + /* place holder for contiguous memory */ + }, }; static struct platform_device veu_device = { @@ -132,6 +138,8 @@ static struct platform_device *sh7343_devices[] __initdata = { static int __init sh7343_devices_setup(void) { + platform_resource_setup_memory(&vpu_device, "vpu", 1 << 20); + platform_resource_setup_memory(&veu_device, "veu", 2 << 20); return platform_add_devices(sh7343_devices, ARRAY_SIZE(sh7343_devices)); } diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c index 2a0fbc3ed9c..7ee01757f3f 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c @@ -48,6 +48,9 @@ static struct resource vpu_resources[] = { .end = 0xfe902807, .flags = IORESOURCE_MEM, }, + [1] = { + /* place holder for contiguous memory */ + }, }; static struct platform_device vpu_device = { @@ -73,6 +76,9 @@ static struct resource veu0_resources[] = { .end = 0xfe9200b7, .flags = IORESOURCE_MEM, }, + [1] = { + /* place holder for contiguous memory */ + }, }; static struct platform_device veu0_device = { @@ -98,6 +104,9 @@ static struct resource veu1_resources[] = { .end = 0xfe9240b7, .flags = IORESOURCE_MEM, }, + [1] = { + /* place holder for contiguous memory */ + }, }; static struct platform_device veu1_device = { @@ -139,6 +148,9 @@ static struct platform_device *sh7366_devices[] __initdata = { static int __init sh7366_devices_setup(void) { + platform_resource_setup_memory(&vpu_device, "vpu", 2 << 20); + platform_resource_setup_memory(&veu0_device, "veu0", 2 << 20); + platform_resource_setup_memory(&veu1_device, "veu1", 2 << 20); return platform_add_devices(sh7366_devices, ARRAY_SIZE(sh7366_devices)); } diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c index 39854d9413c..6015f842eda 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c @@ -73,6 +73,9 @@ static struct resource vpu_resources[] = { .end = 0xfe9022eb, .flags = IORESOURCE_MEM, }, + [1] = { + /* place holder for contiguous memory */ + }, }; static struct platform_device vpu_device = { @@ -98,6 +101,9 @@ static struct resource veu_resources[] = { .end = 0xfe9200b7, .flags = IORESOURCE_MEM, }, + [1] = { + /* place holder for contiguous memory */ + }, }; static struct platform_device veu_device = { @@ -152,6 +158,8 @@ static struct platform_device *sh7722_devices[] __initdata = { static int __init sh7722_devices_setup(void) { + platform_resource_setup_memory(&vpu_device, "vpu", 1 << 20); + platform_resource_setup_memory(&veu_device, "veu", 2 << 20); return platform_add_devices(sh7722_devices, ARRAY_SIZE(sh7722_devices)); } diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c index 1f3137ad013..cb5e6f822e6 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c @@ -28,6 +28,9 @@ static struct resource vpu_resources[] = { .end = 0xfe902807, .flags = IORESOURCE_MEM, }, + [1] = { + /* place holder for contiguous memory */ + }, }; static struct platform_device vpu_device = { @@ -53,6 +56,9 @@ static struct resource veu0_resources[] = { .end = 0xfe92027b, .flags = IORESOURCE_MEM, }, + [1] = { + /* place holder for contiguous memory */ + }, }; static struct platform_device veu0_device = { @@ -78,6 +84,9 @@ static struct resource veu1_resources[] = { .end = 0xfe92427b, .flags = IORESOURCE_MEM, }, + [1] = { + /* place holder for contiguous memory */ + }, }; static struct platform_device veu1_device = { @@ -221,6 +230,9 @@ static struct platform_device *sh7723_devices[] __initdata = { static int __init sh7723_devices_setup(void) { + platform_resource_setup_memory(&vpu_device, "vpu", 2 << 20); + platform_resource_setup_memory(&veu0_device, "veu0", 2 << 20); + platform_resource_setup_memory(&veu1_device, "veu1", 2 << 20); return platform_add_devices(sh7723_devices, ARRAY_SIZE(sh7723_devices)); } diff --git a/arch/sh/mm/consistent.c b/arch/sh/mm/consistent.c index d3c33fc5b1c..8277982d093 100644 --- a/arch/sh/mm/consistent.c +++ b/arch/sh/mm/consistent.c @@ -10,6 +10,7 @@ * for more details. */ #include +#include #include #include #include @@ -185,3 +186,32 @@ void dma_cache_sync(struct device *dev, void *vaddr, size_t size, } } EXPORT_SYMBOL(dma_cache_sync); + +int platform_resource_setup_memory(struct platform_device *pdev, + char *name, unsigned long memsize) +{ + struct resource *r; + dma_addr_t dma_handle; + void *buf; + + r = pdev->resource + pdev->num_resources - 1; + if (r->flags) { + pr_warning("%s: unable to find empty space for resource\n", + name); + return -EINVAL; + } + + buf = dma_alloc_coherent(NULL, memsize, &dma_handle, GFP_KERNEL); + if (!buf) { + pr_warning("%s: unable to allocate memory\n", name); + return -ENOMEM; + } + + memset(buf, 0, memsize); + + r->flags = IORESOURCE_MEM; + r->start = dma_handle; + r->end = r->start + memsize - 1; + r->name = name; + return 0; +} diff --git a/include/asm-sh/device.h b/include/asm-sh/device.h index d8f9872b0e2..efd511d0803 100644 --- a/include/asm-sh/device.h +++ b/include/asm-sh/device.h @@ -5,3 +5,8 @@ */ #include +struct platform_device; +/* allocate contiguous memory chunk and fill in struct resource */ +int platform_resource_setup_memory(struct platform_device *pdev, + char *name, unsigned long memsize); + -- cgit v1.2.3 From cbe9da029d9cc4fff59d559789885079a84a0af8 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Wed, 16 Jul 2008 20:21:09 +0900 Subject: sh: Renesas R0P7785LC0011RL board support This adds initial support for the Renesas R0P7785LC0011RL board. This patch supports 29bit address mode only. Signed-off-by: Yoshihiro Shimoda Signed-off-by: Paul Mundt --- arch/sh/Kconfig | 15 + arch/sh/Makefile | 1 + arch/sh/boards/renesas/sh7785lcr/Makefile | 1 + arch/sh/boards/renesas/sh7785lcr/setup.c | 302 +++++++ arch/sh/configs/sh7785lcr_defconfig | 1388 +++++++++++++++++++++++++++++ arch/sh/drivers/pci/Makefile | 1 + arch/sh/drivers/pci/fixups-sh7785lcr.c | 46 + arch/sh/drivers/pci/ops-sh7785lcr.c | 66 ++ arch/sh/tools/mach-types | 1 + include/asm-sh/sh7785lcr.h | 55 ++ 10 files changed, 1876 insertions(+) create mode 100644 arch/sh/boards/renesas/sh7785lcr/Makefile create mode 100644 arch/sh/boards/renesas/sh7785lcr/setup.c create mode 100644 arch/sh/configs/sh7785lcr_defconfig create mode 100644 arch/sh/drivers/pci/fixups-sh7785lcr.c create mode 100644 arch/sh/drivers/pci/ops-sh7785lcr.c create mode 100644 include/asm-sh/sh7785lcr.h diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 5f84552ecb7..a90b73f72f3 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -495,6 +495,21 @@ config SH_HIGHLANDER select SYS_SUPPORTS_PCI select IO_TRAPPED +config SH_SH7785LCR + bool "SH7785LCR" + depends on CPU_SUBTYPE_SH7785 + select SYS_SUPPORTS_PCI + select IO_TRAPPED + +config SH_SH7785LCR_29BIT_PHYSMAPS + bool "SH7785LCR 29bit physmaps" + depends on SH_SH7785LCR + default y + help + This board has 2 physical memory maps. It can be changed with + DIP switch(S2-5). If you set the DIP switch for S2-5 = ON, + you can access all on-board device in 29bit address mode. + config SH_MIGOR bool "Migo-R" depends on CPU_SUBTYPE_SH7722 diff --git a/arch/sh/Makefile b/arch/sh/Makefile index 1452c4df7de..c627e45c4df 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -124,6 +124,7 @@ machdir-$(CONFIG_SH_X3PROTO) += renesas/x3proto machdir-$(CONFIG_SH_RSK7203) += renesas/rsk7203 machdir-$(CONFIG_SH_AP325RXA) += renesas/ap325rxa machdir-$(CONFIG_SH_SH7763RDP) += renesas/sh7763rdp +machdir-$(CONFIG_SH_SH7785LCR) += renesas/sh7785lcr machdir-$(CONFIG_SH_SH4202_MICRODEV) += superh/microdev machdir-$(CONFIG_SH_LANDISK) += landisk machdir-$(CONFIG_SH_TITAN) += titan diff --git a/arch/sh/boards/renesas/sh7785lcr/Makefile b/arch/sh/boards/renesas/sh7785lcr/Makefile new file mode 100644 index 00000000000..77037567633 --- /dev/null +++ b/arch/sh/boards/renesas/sh7785lcr/Makefile @@ -0,0 +1 @@ +obj-y := setup.o diff --git a/arch/sh/boards/renesas/sh7785lcr/setup.c b/arch/sh/boards/renesas/sh7785lcr/setup.c new file mode 100644 index 00000000000..b95d674ee70 --- /dev/null +++ b/arch/sh/boards/renesas/sh7785lcr/setup.c @@ -0,0 +1,302 @@ +/* + * Renesas Technology Corp. R0P7785LC0011RL Support. + * + * Copyright (C) 2008 Yoshihiro Shimoda + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * NOTE: This board has 2 physical memory maps. + * Please look at include/asm-sh/sh7785lcr.h or hardware manual. + */ +static struct resource heartbeat_resources[] = { + [0] = { + .start = PLD_LEDCR, + .end = PLD_LEDCR, + .flags = IORESOURCE_MEM, + }, +}; + +static struct heartbeat_data heartbeat_data = { + .regsize = 8, +}; + +static struct platform_device heartbeat_device = { + .name = "heartbeat", + .id = -1, + .dev = { + .platform_data = &heartbeat_data, + }, + .num_resources = ARRAY_SIZE(heartbeat_resources), + .resource = heartbeat_resources, +}; + +static struct mtd_partition nor_flash_partitions[] = { + { + .name = "loader", + .offset = 0x00000000, + .size = 512 * 1024, + }, + { + .name = "bootenv", + .offset = MTDPART_OFS_APPEND, + .size = 512 * 1024, + }, + { + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = 4 * 1024 * 1024, + }, + { + .name = "data", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct physmap_flash_data nor_flash_data = { + .width = 4, + .parts = nor_flash_partitions, + .nr_parts = ARRAY_SIZE(nor_flash_partitions), +}; + +static struct resource nor_flash_resources[] = { + [0] = { + .start = NOR_FLASH_ADDR, + .end = NOR_FLASH_ADDR + NOR_FLASH_SIZE - 1, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device nor_flash_device = { + .name = "physmap-flash", + .dev = { + .platform_data = &nor_flash_data, + }, + .num_resources = ARRAY_SIZE(nor_flash_resources), + .resource = nor_flash_resources, +}; + +static struct resource r8a66597_usb_host_resources[] = { + [0] = { + .name = "r8a66597_hcd", + .start = R8A66597_ADDR, + .end = R8A66597_ADDR + R8A66597_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .name = "r8a66597_hcd", + .start = 2, + .end = 2, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device r8a66597_usb_host_device = { + .name = "r8a66597_hcd", + .id = -1, + .dev = { + .dma_mask = NULL, + .coherent_dma_mask = 0xffffffff, + }, + .num_resources = ARRAY_SIZE(r8a66597_usb_host_resources), + .resource = r8a66597_usb_host_resources, +}; + +static struct resource sm501_resources[] = { + [0] = { + .start = SM107_MEM_ADDR, + .end = SM107_MEM_ADDR + SM107_MEM_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = SM107_REG_ADDR, + .end = SM107_REG_ADDR + SM107_REG_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + [2] = { + .start = 10, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct fb_videomode sm501_default_mode_crt = { + .pixclock = 35714, /* 28MHz */ + .xres = 640, + .yres = 480, + .left_margin = 105, + .right_margin = 16, + .upper_margin = 33, + .lower_margin = 10, + .hsync_len = 39, + .vsync_len = 2, + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, +}; + +static struct fb_videomode sm501_default_mode_pnl = { + .pixclock = 40000, /* 25MHz */ + .xres = 640, + .yres = 480, + .left_margin = 2, + .right_margin = 16, + .upper_margin = 33, + .lower_margin = 10, + .hsync_len = 39, + .vsync_len = 2, + .sync = 0, +}; + +static struct sm501_platdata_fbsub sm501_pdata_fbsub_pnl = { + .def_bpp = 16, + .def_mode = &sm501_default_mode_pnl, + .flags = SM501FB_FLAG_USE_INIT_MODE | + SM501FB_FLAG_USE_HWCURSOR | + SM501FB_FLAG_USE_HWACCEL | + SM501FB_FLAG_DISABLE_AT_EXIT | + SM501FB_FLAG_PANEL_NO_VBIASEN, +}; + +static struct sm501_platdata_fbsub sm501_pdata_fbsub_crt = { + .def_bpp = 16, + .def_mode = &sm501_default_mode_crt, + .flags = SM501FB_FLAG_USE_INIT_MODE | + SM501FB_FLAG_USE_HWCURSOR | + SM501FB_FLAG_USE_HWACCEL | + SM501FB_FLAG_DISABLE_AT_EXIT, +}; + +static struct sm501_platdata_fb sm501_fb_pdata = { + .fb_route = SM501_FB_OWN, + .fb_crt = &sm501_pdata_fbsub_crt, + .fb_pnl = &sm501_pdata_fbsub_pnl, +}; + +static struct sm501_initdata sm501_initdata = { + .gpio_high = { + .set = 0x00001fe0, + .mask = 0x0, + }, + .devices = 0, + .mclk = 84 * 1000000, + .m1xclk = 112 * 1000000, +}; + +static struct sm501_platdata sm501_platform_data = { + .init = &sm501_initdata, + .fb = &sm501_fb_pdata, +}; + +static struct platform_device sm501_device = { + .name = "sm501", + .id = -1, + .dev = { + .platform_data = &sm501_platform_data, + }, + .num_resources = ARRAY_SIZE(sm501_resources), + .resource = sm501_resources, +}; + +static struct resource i2c_resources[] = { + [0] = { + .start = PCA9564_ADDR, + .end = PCA9564_ADDR + PCA9564_SIZE - 1, + .flags = IORESOURCE_MEM | IORESOURCE_MEM_8BIT, + }, + [1] = { + .start = 12, + .end = 12, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct i2c_pca9564_pf_platform_data i2c_platform_data = { + .gpio = 0, + .i2c_clock_speed = I2C_PCA_CON_330kHz, + .timeout = 100, +}; + +static struct platform_device i2c_device = { + .name = "i2c-pca-platform", + .id = -1, + .dev = { + .platform_data = &i2c_platform_data, + }, + .num_resources = ARRAY_SIZE(i2c_resources), + .resource = i2c_resources, +}; + +static struct platform_device *sh7785lcr_devices[] __initdata = { + &heartbeat_device, + &nor_flash_device, + &r8a66597_usb_host_device, + &sm501_device, + &i2c_device, +}; + +static struct i2c_board_info __initdata sh7785lcr_i2c_devices[] = { + { + I2C_BOARD_INFO("r2025sd", 0x32), + }, +}; + +static int __init sh7785lcr_devices_setup(void) +{ + i2c_register_board_info(0, sh7785lcr_i2c_devices, + ARRAY_SIZE(sh7785lcr_i2c_devices)); + + return platform_add_devices(sh7785lcr_devices, + ARRAY_SIZE(sh7785lcr_devices)); +} +__initcall(sh7785lcr_devices_setup); + +/* Initialize IRQ setting */ +void __init init_sh7785lcr_IRQ(void) +{ + plat_irq_setup_pins(IRQ_MODE_IRQ7654); + plat_irq_setup_pins(IRQ_MODE_IRQ3210); +} + +static void sh7785lcr_power_off(void) +{ + ctrl_outb(0x01, P2SEGADDR(PLD_POFCR)); +} + +/* Initialize the board */ +static void __init sh7785lcr_setup(char **cmdline_p) +{ + void __iomem *sm501_reg; + + printk(KERN_INFO "Renesas Technology Corp. R0P7785LC0011RL support.\n"); + + pm_power_off = sh7785lcr_power_off; + + /* sm501 DRAM configuration */ + sm501_reg = (void __iomem *)0xb3e00000 + SM501_DRAM_CONTROL; + writel(0x000307c2, sm501_reg); +} + +/* + * The Machine Vector + */ +static struct sh_machine_vector mv_sh7785lcr __initmv = { + .mv_name = "SH7785LCR", + .mv_setup = sh7785lcr_setup, + .mv_init_irq = init_sh7785lcr_IRQ, +}; + diff --git a/arch/sh/configs/sh7785lcr_defconfig b/arch/sh/configs/sh7785lcr_defconfig new file mode 100644 index 00000000000..ff72697365d --- /dev/null +++ b/arch/sh/configs/sh7785lcr_defconfig @@ -0,0 +1,1388 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.26-rc8 +# Tue Jul 15 21:37:59 2008 +# +CONFIG_SUPERH=y +CONFIG_SUPERH32=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_SYS_SUPPORTS_NUMA=y +CONFIG_SYS_SUPPORTS_PCI=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_NO_VIRT_TO_BUS=y +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_IO_TRAPPED=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_PROFILING=y +# CONFIG_MARKERS is not set +# CONFIG_OPROFILE is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_CLASSIC_RCU=y + +# +# System type +# +CONFIG_CPU_SH4=y +CONFIG_CPU_SH4A=y +CONFIG_CPU_SHX2=y +# CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7203 is not set +# CONFIG_CPU_SUBTYPE_SH7206 is not set +# CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set +# CONFIG_CPU_SUBTYPE_SH7705 is not set +# CONFIG_CPU_SUBTYPE_SH7706 is not set +# CONFIG_CPU_SUBTYPE_SH7707 is not set +# CONFIG_CPU_SUBTYPE_SH7708 is not set +# CONFIG_CPU_SUBTYPE_SH7709 is not set +# CONFIG_CPU_SUBTYPE_SH7710 is not set +# CONFIG_CPU_SUBTYPE_SH7712 is not set +# CONFIG_CPU_SUBTYPE_SH7720 is not set +# CONFIG_CPU_SUBTYPE_SH7721 is not set +# CONFIG_CPU_SUBTYPE_SH7750 is not set +# CONFIG_CPU_SUBTYPE_SH7091 is not set +# CONFIG_CPU_SUBTYPE_SH7750R is not set +# CONFIG_CPU_SUBTYPE_SH7750S is not set +# CONFIG_CPU_SUBTYPE_SH7751 is not set +# CONFIG_CPU_SUBTYPE_SH7751R is not set +# CONFIG_CPU_SUBTYPE_SH7760 is not set +# CONFIG_CPU_SUBTYPE_SH4_202 is not set +# CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7763 is not set +# CONFIG_CPU_SUBTYPE_SH7770 is not set +# CONFIG_CPU_SUBTYPE_SH7780 is not set +CONFIG_CPU_SUBTYPE_SH7785=y +# CONFIG_CPU_SUBTYPE_SHX3 is not set +# CONFIG_CPU_SUBTYPE_SH7343 is not set +# CONFIG_CPU_SUBTYPE_SH7722 is not set +# CONFIG_CPU_SUBTYPE_SH7366 is not set +# CONFIG_CPU_SUBTYPE_SH5_101 is not set +# CONFIG_CPU_SUBTYPE_SH5_103 is not set + +# +# Memory management options +# +CONFIG_QUICKLIST=y +CONFIG_MMU=y +CONFIG_PAGE_OFFSET=0x80000000 +CONFIG_MEMORY_START=0x08000000 +CONFIG_MEMORY_SIZE=0x08000000 +CONFIG_29BIT=y +# CONFIG_PMB is not set +# CONFIG_X2TLB is not set +CONFIG_VSYSCALL=y +# CONFIG_NUMA is not set +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_MAX_ACTIVE_REGIONS=2 +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set +# CONFIG_PAGE_SIZE_64KB is not set +CONFIG_SELECT_MEMORY_MODEL=y +# CONFIG_FLATMEM_MANUAL is not set +# CONFIG_DISCONTIGMEM_MANUAL is not set +CONFIG_SPARSEMEM_MANUAL=y +CONFIG_SPARSEMEM=y +CONFIG_HAVE_MEMORY_PRESENT=y +CONFIG_SPARSEMEM_STATIC=y +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +# CONFIG_MEMORY_HOTPLUG is not set +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=2 + +# +# Cache configuration +# +# CONFIG_SH_DIRECT_MAPPED is not set +CONFIG_CACHE_WRITEBACK=y +# CONFIG_CACHE_WRITETHROUGH is not set +# CONFIG_CACHE_OFF is not set + +# +# Processor features +# +CONFIG_CPU_LITTLE_ENDIAN=y +# CONFIG_CPU_BIG_ENDIAN is not set +CONFIG_SH_FPU=y +CONFIG_SH_STORE_QUEUES=y +CONFIG_CPU_HAS_INTEVT=y +CONFIG_CPU_HAS_SR_RB=y +CONFIG_CPU_HAS_PTEA=y +CONFIG_CPU_HAS_FPU=y + +# +# Board support +# +# CONFIG_SH_HIGHLANDER is not set +CONFIG_SH_SH7785LCR=y +CONFIG_SH_SH7785LCR_29BIT_PHYSMAPS=y + +# +# Timer and clock configuration +# +CONFIG_SH_TMU=y +CONFIG_SH_TIMER_IRQ=28 +CONFIG_SH_PCLK_FREQ=50000000 +CONFIG_TICK_ONESHOT=y +# CONFIG_NO_HZ is not set +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# DMA support +# +# CONFIG_SH_DMA is not set + +# +# Companion Chips +# + +# +# Additional SuperH Device Drivers +# +CONFIG_HEARTBEAT=y +# CONFIG_PUSH_SWITCH is not set + +# +# Kernel features +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set +CONFIG_KEXEC=y +# CONFIG_CRASH_DUMP is not set +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_PREEMPT=y +# CONFIG_PREEMPT_RCU is not set +CONFIG_GUSA=y + +# +# Boot options +# +CONFIG_ZERO_PAGE_OFFSET=0x00001000 +CONFIG_BOOT_LINK_OFFSET=0x00800000 +# CONFIG_CMDLINE_BOOL is not set + +# +# Bus options +# +CONFIG_PCI=y +CONFIG_SH_PCIDMA_NONCOHERENT=y +CONFIG_PCI_AUTO=y +CONFIG_PCI_AUTO_UPDATE_RESOURCES=y +# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCI_LEGACY=y +# CONFIG_PCI_DEBUG is not set +# CONFIG_PCCARD is not set +# CONFIG_HOTPLUG_PCI is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_MULTIPLE_TABLES is not set +# CONFIG_IP_ROUTE_MULTIPATH is not set +# CONFIG_IP_ROUTE_VERBOSE is not set +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +CONFIG_WIRELESS_EXT=y +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x00000000 +CONFIG_MTD_PHYSMAP_LEN=0x0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=0 +# CONFIG_MTD_INTEL_VR_NOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y +# CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SIL24 is not set +CONFIG_ATA_SFF=y +# CONFIG_SATA_SVW is not set +# CONFIG_ATA_PIIX is not set +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SX4 is not set +CONFIG_SATA_SIL=y +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set +# CONFIG_SATA_INIC162X is not set +# CONFIG_PATA_ALI is not set +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_CMD640_PCI is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CS5520 is not set +# CONFIG_PATA_CS5530 is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_ATA_GENERIC is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_IT8213 is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_MARVELL is not set +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_NS87415 is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RZ1000 is not set +# CONFIG_PATA_SC1200 is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set +# CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_SCH is not set +# CONFIG_MD is not set +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# Enable only one of the two stacks, unless you know what you are doing +# +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set +# CONFIG_I2O is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_ARCNET is not set +# CONFIG_NET_ETHERNET is not set +CONFIG_NETDEV_1000=y +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +CONFIG_R8169=y +# CONFIG_R8169_NAPI is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +# CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_TR is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SH_KEYSC is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_NR_UARTS=6 +CONFIG_SERIAL_SH_SCI_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +# CONFIG_I2C_CHARDEV is not set +CONFIG_I2C_ALGOPCA=y + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +CONFIG_I2C_PCA_PLATFORM=y +# CONFIG_I2C_SH_MOBILE is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_SPI is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +CONFIG_MFD_SM501=y +# CONFIG_HTC_PASIC3 is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_RADEON is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_S3 is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_PM3 is not set +CONFIG_FB_SM501=y +# CONFIG_FB_VIRTUAL is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_LOGO_LINUX_CLUT224=y +# CONFIG_LOGO_SUPERH_MONO is not set +# CONFIG_LOGO_SUPERH_VGA16 is not set +# CONFIG_LOGO_SUPERH_CLUT224 is not set + +# +# Sound +# +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +CONFIG_USB_EHCI_HCD=m +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +CONFIG_USB_OHCI_HCD=m +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +CONFIG_USB_R8A66597_HCD=y + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +CONFIG_USB_TEST=m +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_INFINIBAND is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +CONFIG_RTC_DRV_RS5C372=y +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_RTC_DRV_SH is not set +# CONFIG_UIO is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +CONFIG_NTFS_FS=y +# CONFIG_NTFS_DEBUG is not set +CONFIG_NTFS_RW=y + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +CONFIG_MINIX_FS=y +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +CONFIG_NFSD=y +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set +CONFIG_NFSD_V4=y +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_BIND34 is not set +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +CONFIG_NLS_CODEPAGE_932=y +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +# CONFIG_PRINTK_TIME is not set +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_FRAME_POINTER is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set +# CONFIG_SH_STANDARD_BIOS is not set +# CONFIG_EARLY_SCIF_CONSOLE is not set +# CONFIG_DEBUG_BOOTMEM is not set +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_4KSTACKS is not set +# CONFIG_IRQSTACKS is not set +# CONFIG_SH_KGDB is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set +# CONFIG_CRYPTO_HW is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/sh/drivers/pci/Makefile b/arch/sh/drivers/pci/Makefile index 0718805774e..847e90894d1 100644 --- a/arch/sh/drivers/pci/Makefile +++ b/arch/sh/drivers/pci/Makefile @@ -23,3 +23,4 @@ obj-$(CONFIG_SH_LANDISK) += ops-landisk.o obj-$(CONFIG_SH_LBOX_RE2) += ops-lboxre2.o fixups-lboxre2.o obj-$(CONFIG_SH_7780_SOLUTION_ENGINE) += ops-se7780.o fixups-se7780.o obj-$(CONFIG_SH_CAYMAN) += ops-cayman.o +obj-$(CONFIG_SH_SH7785LCR) += ops-sh7785lcr.o fixups-sh7785lcr.o diff --git a/arch/sh/drivers/pci/fixups-sh7785lcr.c b/arch/sh/drivers/pci/fixups-sh7785lcr.c new file mode 100644 index 00000000000..4949e601387 --- /dev/null +++ b/arch/sh/drivers/pci/fixups-sh7785lcr.c @@ -0,0 +1,46 @@ +/* + * arch/sh/drivers/pci/fixups-sh7785lcr.c + * + * R0P7785LC0011RL PCI fixups + * Copyright (C) 2008 Yoshihiro Shimoda + * + * Based on arch/sh/drivers/pci/fixups-r7780rp.c + * Copyright (C) 2003 Lineo uSolutions, Inc. + * Copyright (C) 2004 - 2006 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include +#include "pci-sh4.h" + +int pci_fixup_pcic(void) +{ + pci_write_reg(0x000043ff, SH4_PCIINTM); + pci_write_reg(0x0000380f, SH4_PCIAINTM); + + pci_write_reg(0xfbb00047, SH7780_PCICMD); + pci_write_reg(0x00000000, SH7780_PCIIBAR); + + pci_write_reg(0x00011912, SH7780_PCISVID); + pci_write_reg(0x08000000, SH7780_PCICSCR0); + pci_write_reg(0x0000001b, SH7780_PCICSAR0); + pci_write_reg(0xfd000000, SH7780_PCICSCR1); + pci_write_reg(0x0000000f, SH7780_PCICSAR1); + + pci_write_reg(0xfd000000, SH7780_PCIMBR0); + pci_write_reg(0x00fc0000, SH7780_PCIMBMR0); + +#ifdef CONFIG_32BIT + pci_write_reg(0xc0000000, SH7780_PCIMBR2); + pci_write_reg(0x20000000 - SH7780_PCI_IO_SIZE, SH7780_PCIMBMR2); +#endif + + /* Set IOBR for windows containing area specified in pci.h */ + pci_write_reg((PCIBIOS_MIN_IO & ~(SH7780_PCI_IO_SIZE - 1)), + SH7780_PCIIOBR); + pci_write_reg(((SH7780_PCI_IO_SIZE - 1) & (7 << 18)), SH7780_PCIIOBMR); + + return 0; +} diff --git a/arch/sh/drivers/pci/ops-sh7785lcr.c b/arch/sh/drivers/pci/ops-sh7785lcr.c new file mode 100644 index 00000000000..b3bd6870205 --- /dev/null +++ b/arch/sh/drivers/pci/ops-sh7785lcr.c @@ -0,0 +1,66 @@ +/* + * Author: Ian DaSilva (idasilva@mvista.com) + * + * Highly leveraged from pci-bigsur.c, written by Dustin McIntire. + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * PCI initialization for the Renesas R0P7785LC0011RL board + * Based on arch/sh/drivers/pci/ops-r7780rp.c + * + */ +#include +#include +#include +#include +#include +#include "pci-sh4.h" + +static char irq_tab[] __initdata = { + 65, 66, 67, 68, +}; + +int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) +{ + return irq_tab[slot]; +} + +static struct resource sh7785_io_resource = { + .name = "SH7785_IO", + .start = SH7780_PCI_IO_BASE, + .end = SH7780_PCI_IO_BASE + SH7780_PCI_IO_SIZE - 1, + .flags = IORESOURCE_IO +}; + +static struct resource sh7785_mem_resource = { + .name = "SH7785_mem", + .start = SH7780_PCI_MEMORY_BASE, + .end = SH7780_PCI_MEMORY_BASE + SH7780_PCI_MEM_SIZE - 1, + .flags = IORESOURCE_MEM +}; + +struct pci_channel board_pci_channels[] = { + { &sh4_pci_ops, &sh7785_io_resource, &sh7785_mem_resource, 0, 0xff }, + { NULL, NULL, NULL, 0, 0 }, +}; +EXPORT_SYMBOL(board_pci_channels); + +static struct sh4_pci_address_map sh7785_pci_map = { + .window0 = { + .base = SH7780_CS2_BASE_ADDR, + .size = 0x04000000, + }, + + .window1 = { + .base = SH7780_CS3_BASE_ADDR, + .size = 0x04000000, + }, + + .flags = SH4_PCIC_NO_RESET, +}; + +int __init pcibios_init_platform(void) +{ + return sh7780_pcic_init(&sh7785_pci_map); +} diff --git a/arch/sh/tools/mach-types b/arch/sh/tools/mach-types index 4473723685c..0a11cc08f0a 100644 --- a/arch/sh/tools/mach-types +++ b/arch/sh/tools/mach-types @@ -49,3 +49,4 @@ MIGOR SH_MIGOR RSK7203 SH_RSK7203 AP325RXA SH_AP325RXA SH7763RDP SH_SH7763RDP +SH7785LCR SH_SH7785LCR diff --git a/include/asm-sh/sh7785lcr.h b/include/asm-sh/sh7785lcr.h new file mode 100644 index 00000000000..1ce27d5c749 --- /dev/null +++ b/include/asm-sh/sh7785lcr.h @@ -0,0 +1,55 @@ +#ifndef __ASM_SH_RENESAS_SH7785LCR_H +#define __ASM_SH_RENESAS_SH7785LCR_H + +/* + * This board has 2 physical memory maps. + * It can be changed with DIP switch(S2-5). + * + * phys address | S2-5 = OFF | S2-5 = ON + * -----------------------------+---------------+--------------- + * 0x00000000 - 0x03ffffff(CS0) | NOR Flash | NOR Flash + * 0x04000000 - 0x05ffffff(CS1) | PLD | PLD + * 0x06000000 - 0x07ffffff(CS1) | reserved | I2C + * 0x08000000 - 0x0bffffff(CS2) | USB | DDR SDRAM + * 0x0c000000 - 0x0fffffff(CS3) | SD | DDR SDRAM + * 0x10000000 - 0x13ffffff(CS4) | SM107 | SM107 + * 0x14000000 - 0x17ffffff(CS5) | I2C | USB + * 0x18000000 - 0x1bffffff(CS6) | reserved | SD + * 0x40000000 - 0x5fffffff | DDR SDRAM | (cannot use) + * + */ + +#define NOR_FLASH_ADDR 0x00000000 +#define NOR_FLASH_SIZE 0x04000000 + +#define PLD_BASE_ADDR 0x04000000 +#define PLD_PCICR (PLD_BASE_ADDR + 0x00) +#define PLD_LCD_BK_CONTR (PLD_BASE_ADDR + 0x02) +#define PLD_LOCALCR (PLD_BASE_ADDR + 0x04) +#define PLD_POFCR (PLD_BASE_ADDR + 0x06) +#define PLD_LEDCR (PLD_BASE_ADDR + 0x08) +#define PLD_SWSR (PLD_BASE_ADDR + 0x0a) +#define PLD_VERSR (PLD_BASE_ADDR + 0x0c) +#define PLD_MMSR (PLD_BASE_ADDR + 0x0e) + +#define SM107_MEM_ADDR 0x10000000 +#define SM107_MEM_SIZE 0x00e00000 +#define SM107_REG_ADDR 0x13e00000 +#define SM107_REG_SIZE 0x00200000 + +#if defined(CONFIG_SH_SH7785LCR_29BIT_PHYSMAPS) +#define R8A66597_ADDR 0x14000000 /* USB */ +#define CG200_ADDR 0x18000000 /* SD */ +#define PCA9564_ADDR 0x06000000 /* I2C */ +#else +#define R8A66597_ADDR 0x08000000 +#define CG200_ADDR 0x0c000000 +#define PCA9564_ADDR 0x14000000 +#endif + +#define R8A66597_SIZE 0x00000100 +#define CG200_SIZE 0x00010000 +#define PCA9564_SIZE 0x00000100 + +#endif /* __ASM_SH_RENESAS_SH7785LCR_H */ + -- cgit v1.2.3 From c46acb8e2093779bda393f028099477f98cfef3c Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Wed, 16 Jul 2008 19:45:40 +0300 Subject: fix sh ptep_get_and_clear breakage Commit 1ea0704e0da65b2b46f9142ff1391163aac24060 (mm: add a ptep_modify_prot transaction abstraction) triggered on sh build errors like the following: <-- snip --> ... CC arch/sh/mm/pg-sh4.o cc1: warnings being treated as errors include2/asm/pgtable.h:139: error: 'ptep_get_and_clear' declared inline after being called include2/asm/pgtable.h:139: error: previous declaration of 'ptep_get_and_clear' was here make[2]: *** [arch/sh/mm/pg-sh4.o] Error 1 <-- snip --> Since there's no good reason for marking these global functions as "inline" this patch therefore removes the inline's. Signed-off-by: Adrian Bunk Signed-off-by: Paul Mundt --- arch/sh/mm/pg-sh7705.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/sh/mm/pg-sh7705.c b/arch/sh/mm/pg-sh7705.c index 7f885b7f8af..eaf25147194 100644 --- a/arch/sh/mm/pg-sh7705.c +++ b/arch/sh/mm/pg-sh7705.c @@ -118,7 +118,7 @@ void copy_user_page(void *to, void *from, unsigned long address, struct page *pg * For SH7705, we have our own implementation for ptep_get_and_clear * Copied from pg-sh4.c */ -inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) +pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) { pte_t pte = *ptep; -- cgit v1.2.3 From 5c8f9d94fea98596db255a579f5d02a0195abda7 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 17 Jul 2008 18:48:57 +0900 Subject: sh: Add arch_flags to struct clk Add arch_flags to struct clk so we can keep per-clock private data somewhere and share code between multiple clocks. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- include/asm-sh/clock.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/asm-sh/clock.h b/include/asm-sh/clock.h index 608fda55c0e..252f15540dd 100644 --- a/include/asm-sh/clock.h +++ b/include/asm-sh/clock.h @@ -30,6 +30,7 @@ struct clk { unsigned long rate; unsigned long flags; + unsigned long arch_flags; }; #define CLK_ALWAYS_ENABLED (1 << 0) -- cgit v1.2.3 From 3fec18bd603c3a55aeb325121a3e752f647641be Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 17 Jul 2008 18:52:19 +0900 Subject: sh: Use arch_flags to simplify sh7722 siu clock code Make use of arch_flags to simplify the SIU clock code. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/sh4a/clock-sh7722.c | 47 +++++++--------------------------- 1 file changed, 9 insertions(+), 38 deletions(-) diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7722.c b/arch/sh/kernel/cpu/sh4a/clock-sh7722.c index 299138ebe16..d7b14660f73 100644 --- a/arch/sh/kernel/cpu/sh4a/clock-sh7722.c +++ b/arch/sh/kernel/cpu/sh4a/clock-sh7722.c @@ -411,40 +411,16 @@ static struct clk_ops sh7722_frqcr_clk_ops = { * clock ops methods for SIU A/B and IrDA clock * */ -static int sh7722_siu_which(struct clk *clk) -{ - if (!strcmp(clk->name, "siu_a_clk")) - return 0; - if (!strcmp(clk->name, "siu_b_clk")) - return 1; -#if defined(CONFIG_CPU_SUBTYPE_SH7722) - if (!strcmp(clk->name, "irda_clk")) - return 2; -#endif - return -EINVAL; -} - -static unsigned long sh7722_siu_regs[] = { - [0] = SCLKACR, - [1] = SCLKBCR, -#if defined(CONFIG_CPU_SUBTYPE_SH7722) - [2] = IrDACLKCR, -#endif -}; static int sh7722_siu_start_stop(struct clk *clk, int enable) { - int siu = sh7722_siu_which(clk); unsigned long r; - if (siu < 0) - return siu; - BUG_ON(siu > 2); - r = ctrl_inl(sh7722_siu_regs[siu]); + r = ctrl_inl(clk->arch_flags); if (enable) - ctrl_outl(r & ~(1 << 8), sh7722_siu_regs[siu]); + ctrl_outl(r & ~(1 << 8), clk->arch_flags); else - ctrl_outl(r | (1 << 8), sh7722_siu_regs[siu]); + ctrl_outl(r | (1 << 8), clk->arch_flags); return 0; } @@ -496,31 +472,23 @@ static void sh7722_video_recalc(struct clk *clk) static int sh7722_siu_set_rate(struct clk *clk, unsigned long rate, int algo_id) { - int siu = sh7722_siu_which(clk); unsigned long r; int div; - if (siu < 0) - return siu; - BUG_ON(siu > 2); - r = ctrl_inl(sh7722_siu_regs[siu]); + r = ctrl_inl(clk->arch_flags); div = sh7722_find_divisors(clk->parent->rate, rate); if (div < 0) return div; r = (r & ~0xF) | div; - ctrl_outl(r, sh7722_siu_regs[siu]); + ctrl_outl(r, clk->arch_flags); return 0; } static void sh7722_siu_recalc(struct clk *clk) { - int siu = sh7722_siu_which(clk); unsigned long r; - if (siu < 0) - return /* siu */ ; - BUG_ON(siu > 2); - r = ctrl_inl(sh7722_siu_regs[siu]); + r = ctrl_inl(clk->arch_flags); clk->rate = clk->parent->rate * 2 / divisors2[r & 0xF]; } @@ -567,17 +535,20 @@ static struct clk sh7722_sdram_clock = { */ static struct clk sh7722_siu_a_clock = { .name = "siu_a_clk", + .arch_flags = SCLKACR, .ops = &sh7722_siu_clk_ops, }; static struct clk sh7722_siu_b_clock = { .name = "siu_b_clk", + .arch_flags = SCLKBCR, .ops = &sh7722_siu_clk_ops, }; #if defined(CONFIG_CPU_SUBTYPE_SH7722) static struct clk sh7722_irda_clock = { .name = "irda_clk", + .arch_flags = IrDACLKCR, .ops = &sh7722_siu_clk_ops, }; #endif -- cgit v1.2.3 From aea167cbb5c9056295109e5e171d27e30e2be5bc Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 17 Jul 2008 18:56:15 +0900 Subject: sh: Add SuperH Mobile MSTPCR bits to clock framework Handle module stop clock bits in MSTPCRn through the clock framework. The clocks are named after the bits in the data sheet. The association between bit number and hardware block is processor specific. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/sh4a/clock-sh7722.c | 116 +++++++++++++++++++++++++++++++++ include/asm-sh/cpu-sh4/freq.h | 3 + 2 files changed, 119 insertions(+) diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7722.c b/arch/sh/kernel/cpu/sh4a/clock-sh7722.c index d7b14660f73..2f50f8a1f87 100644 --- a/arch/sh/kernel/cpu/sh4a/clock-sh7722.c +++ b/arch/sh/kernel/cpu/sh4a/clock-sh7722.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include @@ -558,6 +559,115 @@ static struct clk sh7722_video_clock = { .ops = &sh7722_video_clk_ops, }; +static int sh7722_mstpcr_start_stop(struct clk *clk, unsigned long reg, + int enable) +{ + unsigned long bit = clk->arch_flags; + unsigned long r; + + r = ctrl_inl(reg); + + if (enable) + r &= ~(1 << bit); + else + r |= (1 << bit); + + ctrl_outl(r, reg); + return 0; +} + +static void sh7722_mstpcr0_enable(struct clk *clk) +{ + sh7722_mstpcr_start_stop(clk, MSTPCR0, 1); +} + +static void sh7722_mstpcr0_disable(struct clk *clk) +{ + sh7722_mstpcr_start_stop(clk, MSTPCR0, 0); +} + +static void sh7722_mstpcr1_enable(struct clk *clk) +{ + sh7722_mstpcr_start_stop(clk, MSTPCR1, 1); +} + +static void sh7722_mstpcr1_disable(struct clk *clk) +{ + sh7722_mstpcr_start_stop(clk, MSTPCR1, 0); +} + +static void sh7722_mstpcr2_enable(struct clk *clk) +{ + sh7722_mstpcr_start_stop(clk, MSTPCR2, 1); +} + +static void sh7722_mstpcr2_disable(struct clk *clk) +{ + sh7722_mstpcr_start_stop(clk, MSTPCR2, 0); +} + +static struct clk_ops sh7722_mstpcr0_clk_ops = { + .enable = sh7722_mstpcr0_enable, + .disable = sh7722_mstpcr0_disable, +}; + +static struct clk_ops sh7722_mstpcr1_clk_ops = { + .enable = sh7722_mstpcr1_enable, + .disable = sh7722_mstpcr1_disable, +}; + +static struct clk_ops sh7722_mstpcr2_clk_ops = { + .enable = sh7722_mstpcr2_enable, + .disable = sh7722_mstpcr2_disable, +}; + +#define DECLARE_MSTPCRN(regnr, bitnr, bitstr) \ +{ \ + .name = "mstp" __stringify(regnr) bitstr, \ + .arch_flags = bitnr, \ + .ops = &sh7722_mstpcr ## regnr ## _clk_ops, \ +} + +#define DECLARE_MSTPCR(regnr) \ + DECLARE_MSTPCRN(regnr, 31, "31"), \ + DECLARE_MSTPCRN(regnr, 30, "30"), \ + DECLARE_MSTPCRN(regnr, 29, "29"), \ + DECLARE_MSTPCRN(regnr, 28, "28"), \ + DECLARE_MSTPCRN(regnr, 27, "27"), \ + DECLARE_MSTPCRN(regnr, 26, "26"), \ + DECLARE_MSTPCRN(regnr, 25, "25"), \ + DECLARE_MSTPCRN(regnr, 24, "24"), \ + DECLARE_MSTPCRN(regnr, 23, "23"), \ + DECLARE_MSTPCRN(regnr, 22, "22"), \ + DECLARE_MSTPCRN(regnr, 21, "21"), \ + DECLARE_MSTPCRN(regnr, 20, "20"), \ + DECLARE_MSTPCRN(regnr, 19, "19"), \ + DECLARE_MSTPCRN(regnr, 18, "18"), \ + DECLARE_MSTPCRN(regnr, 17, "17"), \ + DECLARE_MSTPCRN(regnr, 16, "16"), \ + DECLARE_MSTPCRN(regnr, 15, "15"), \ + DECLARE_MSTPCRN(regnr, 14, "14"), \ + DECLARE_MSTPCRN(regnr, 13, "13"), \ + DECLARE_MSTPCRN(regnr, 12, "12"), \ + DECLARE_MSTPCRN(regnr, 11, "11"), \ + DECLARE_MSTPCRN(regnr, 10, "10"), \ + DECLARE_MSTPCRN(regnr, 9, "09"), \ + DECLARE_MSTPCRN(regnr, 8, "08"), \ + DECLARE_MSTPCRN(regnr, 7, "07"), \ + DECLARE_MSTPCRN(regnr, 6, "06"), \ + DECLARE_MSTPCRN(regnr, 5, "05"), \ + DECLARE_MSTPCRN(regnr, 4, "04"), \ + DECLARE_MSTPCRN(regnr, 3, "03"), \ + DECLARE_MSTPCRN(regnr, 2, "02"), \ + DECLARE_MSTPCRN(regnr, 1, "01"), \ + DECLARE_MSTPCRN(regnr, 0, "00") + +static struct clk sh7722_mstpcr[] = { + DECLARE_MSTPCR(0), + DECLARE_MSTPCR(1), + DECLARE_MSTPCR(2), +}; + static struct clk *sh7722_clocks[] = { &sh7722_umem_clock, &sh7722_sh_clock, @@ -600,5 +710,11 @@ int __init arch_clk_init(void) clk_register(sh7722_clocks[i]); } clk_put(master); + + for (i = 0; i < ARRAY_SIZE(sh7722_mstpcr); i++) { + pr_debug( "Registering mstpcr '%s'\n", sh7722_mstpcr[i].name); + clk_register(&sh7722_mstpcr[i]); + } + return 0; } diff --git a/include/asm-sh/cpu-sh4/freq.h b/include/asm-sh/cpu-sh4/freq.h index a898105ebab..c23af81c2e7 100644 --- a/include/asm-sh/cpu-sh4/freq.h +++ b/include/asm-sh/cpu-sh4/freq.h @@ -19,6 +19,9 @@ #define SCLKACR 0xa4150008 #define SCLKBCR 0xa415000c #define IrDACLKCR 0xa4150010 +#define MSTPCR0 0xa4150030 +#define MSTPCR1 0xa4150034 +#define MSTPCR2 0xa4150038 #elif defined(CONFIG_CPU_SUBTYPE_SH7763) || \ defined(CONFIG_CPU_SUBTYPE_SH7780) #define FRQCR 0xffc80000 -- cgit v1.2.3 From 1312994c8008d66806d9452c15d50df86a031437 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 17 Jul 2008 19:02:23 +0900 Subject: sh: Merge sh7343 and sh7722 clock code This code makes sh7343 share the sh7722 clock code. Instead of just using the good and very old sh7343 clock implmentation, switch to the new MSTPCR enabled clock code. SIU clocks are disabled on sh7343 for now. With this change all SuperH Mobile devices now use the same clock code. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/sh4a/Makefile | 2 +- arch/sh/kernel/cpu/sh4a/clock-sh7343.c | 99 ---------------------------------- arch/sh/kernel/cpu/sh4a/clock-sh7722.c | 70 +++++++++++++----------- 3 files changed, 41 insertions(+), 130 deletions(-) delete mode 100644 arch/sh/kernel/cpu/sh4a/clock-sh7343.c diff --git a/arch/sh/kernel/cpu/sh4a/Makefile b/arch/sh/kernel/cpu/sh4a/Makefile index a880e796875..9381ad8da26 100644 --- a/arch/sh/kernel/cpu/sh4a/Makefile +++ b/arch/sh/kernel/cpu/sh4a/Makefile @@ -21,7 +21,7 @@ clock-$(CONFIG_CPU_SUBTYPE_SH7763) := clock-sh7763.o clock-$(CONFIG_CPU_SUBTYPE_SH7770) := clock-sh7770.o clock-$(CONFIG_CPU_SUBTYPE_SH7780) := clock-sh7780.o clock-$(CONFIG_CPU_SUBTYPE_SH7785) := clock-sh7785.o -clock-$(CONFIG_CPU_SUBTYPE_SH7343) := clock-sh7343.o +clock-$(CONFIG_CPU_SUBTYPE_SH7343) := clock-sh7722.o clock-$(CONFIG_CPU_SUBTYPE_SH7722) := clock-sh7722.o clock-$(CONFIG_CPU_SUBTYPE_SH7723) := clock-sh7722.o clock-$(CONFIG_CPU_SUBTYPE_SH7366) := clock-sh7722.o diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7343.c b/arch/sh/kernel/cpu/sh4a/clock-sh7343.c deleted file mode 100644 index 7adc4f16e95..00000000000 --- a/arch/sh/kernel/cpu/sh4a/clock-sh7343.c +++ /dev/null @@ -1,99 +0,0 @@ -/* - * arch/sh/kernel/cpu/sh4a/clock-sh7343.c - * - * SH7343/SH7722 support for the clock framework - * - * Copyright (C) 2006 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include -#include -#include -#include -#include - -/* - * SH7343/SH7722 uses a common set of multipliers and divisors, so this - * is quite simple.. - */ -static int multipliers[] = { 1, 2, 1, 2, 1, 1, 1, 1, 1, 1, 1, 1, 1 }; -static int divisors[] = { 1, 3, 2, 5, 3, 4, 5, 6, 8, 10, 12, 16, 20 }; - -#define pll_calc() (((ctrl_inl(FRQCR) >> 24) & 0x1f) + 1) - -static void master_clk_init(struct clk *clk) -{ - clk->parent = clk_get(NULL, "cpu_clk"); -} - -static void master_clk_recalc(struct clk *clk) -{ - int idx = (ctrl_inl(FRQCR) & 0x000f); - clk->rate *= clk->parent->rate * multipliers[idx] / divisors[idx]; -} - -static struct clk_ops sh7343_master_clk_ops = { - .init = master_clk_init, - .recalc = master_clk_recalc, -}; - -static void module_clk_init(struct clk *clk) -{ - clk->parent = NULL; - clk->rate = CONFIG_SH_PCLK_FREQ; -} - -static struct clk_ops sh7343_module_clk_ops = { - .init = module_clk_init, -}; - -static void bus_clk_init(struct clk *clk) -{ - clk->parent = clk_get(NULL, "cpu_clk"); -} - -static void bus_clk_recalc(struct clk *clk) -{ - int idx = (ctrl_inl(FRQCR) >> 8) & 0x000f; - clk->rate = clk->parent->rate * multipliers[idx] / divisors[idx]; -} - -static struct clk_ops sh7343_bus_clk_ops = { - .init = bus_clk_init, - .recalc = bus_clk_recalc, -}; - -static void cpu_clk_init(struct clk *clk) -{ - clk->parent = clk_get(NULL, "module_clk"); - clk->flags |= CLK_RATE_PROPAGATES; - clk_set_rate(clk, clk_get_rate(clk)); -} - -static void cpu_clk_recalc(struct clk *clk) -{ - int idx = (ctrl_inl(FRQCR) >> 20) & 0x000f; - clk->rate = clk->parent->rate * pll_calc() * - multipliers[idx] / divisors[idx]; -} - -static struct clk_ops sh7343_cpu_clk_ops = { - .init = cpu_clk_init, - .recalc = cpu_clk_recalc, -}; - -static struct clk_ops *sh7343_clk_ops[] = { - &sh7343_master_clk_ops, - &sh7343_module_clk_ops, - &sh7343_bus_clk_ops, - &sh7343_cpu_clk_ops, -}; - -void __init arch_init_clk_ops(struct clk_ops **ops, int idx) -{ - if (idx < ARRAY_SIZE(sh7343_clk_ops)) - *ops = sh7343_clk_ops[idx]; -} diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7722.c b/arch/sh/kernel/cpu/sh4a/clock-sh7722.c index 2f50f8a1f87..db913855c2f 100644 --- a/arch/sh/kernel/cpu/sh4a/clock-sh7722.c +++ b/arch/sh/kernel/cpu/sh4a/clock-sh7722.c @@ -1,7 +1,7 @@ /* * arch/sh/kernel/cpu/sh4a/clock-sh7722.c * - * SH7722 & SH7366 support for the clock framework + * SH7343, SH7722, SH7723 & SH7366 support for the clock framework * * Copyright (c) 2006-2007 Nomad Global Solutions Inc * Based on code for sh7343 by Paul Mundt @@ -413,6 +413,30 @@ static struct clk_ops sh7722_frqcr_clk_ops = { * */ +#ifndef CONFIG_CPU_SUBTYPE_SH7343 + +static int sh7722_siu_set_rate(struct clk *clk, unsigned long rate, int algo_id) +{ + unsigned long r; + int div; + + r = ctrl_inl(clk->arch_flags); + div = sh7722_find_divisors(clk->parent->rate, rate); + if (div < 0) + return div; + r = (r & ~0xF) | div; + ctrl_outl(r, clk->arch_flags); + return 0; +} + +static void sh7722_siu_recalc(struct clk *clk) +{ + unsigned long r; + + r = ctrl_inl(clk->arch_flags); + clk->rate = clk->parent->rate * 2 / divisors2[r & 0xF]; +} + static int sh7722_siu_start_stop(struct clk *clk, int enable) { unsigned long r; @@ -435,6 +459,15 @@ static void sh7722_siu_disable(struct clk *clk) sh7722_siu_start_stop(clk, 0); } +static struct clk_ops sh7722_siu_clk_ops = { + .recalc = sh7722_siu_recalc, + .set_rate = sh7722_siu_set_rate, + .enable = sh7722_siu_enable, + .disable = sh7722_siu_disable, +}; + +#endif /* CONFIG_CPU_SUBTYPE_SH7343 */ + static void sh7722_video_enable(struct clk *clk) { unsigned long r; @@ -471,35 +504,6 @@ static void sh7722_video_recalc(struct clk *clk) clk->rate = clk->parent->rate / ((r & 0x3F) + 1); } -static int sh7722_siu_set_rate(struct clk *clk, unsigned long rate, int algo_id) -{ - unsigned long r; - int div; - - r = ctrl_inl(clk->arch_flags); - div = sh7722_find_divisors(clk->parent->rate, rate); - if (div < 0) - return div; - r = (r & ~0xF) | div; - ctrl_outl(r, clk->arch_flags); - return 0; -} - -static void sh7722_siu_recalc(struct clk *clk) -{ - unsigned long r; - - r = ctrl_inl(clk->arch_flags); - clk->rate = clk->parent->rate * 2 / divisors2[r & 0xF]; -} - -static struct clk_ops sh7722_siu_clk_ops = { - .recalc = sh7722_siu_recalc, - .set_rate = sh7722_siu_set_rate, - .enable = sh7722_siu_enable, - .disable = sh7722_siu_disable, -}; - static struct clk_ops sh7722_video_clk_ops = { .recalc = sh7722_video_recalc, .set_rate = sh7722_video_set_rate, @@ -529,6 +533,9 @@ static struct clk sh7722_sdram_clock = { .ops = &sh7722_frqcr_clk_ops, }; + +#ifndef CONFIG_CPU_SUBTYPE_SH7343 + /* * these three clocks - SIU A, SIU B, IrDA - share the same clk_ops * methods of clk_ops determine which register they should access by @@ -553,6 +560,7 @@ static struct clk sh7722_irda_clock = { .ops = &sh7722_siu_clk_ops, }; #endif +#endif /* CONFIG_CPU_SUBTYPE_SH7343 */ static struct clk sh7722_video_clock = { .name = "video_clk", @@ -673,10 +681,12 @@ static struct clk *sh7722_clocks[] = { &sh7722_sh_clock, &sh7722_peripheral_clock, &sh7722_sdram_clock, +#ifndef CONFIG_CPU_SUBTYPE_SH7343 &sh7722_siu_a_clock, &sh7722_siu_b_clock, #if defined(CONFIG_CPU_SUBTYPE_SH7722) &sh7722_irda_clock, +#endif #endif &sh7722_video_clock, }; -- cgit v1.2.3 From 152fe36ebee82b63a9c6e510c52aaa82f4b1940d Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 17 Jul 2008 19:05:54 +0900 Subject: sh: Show all clocks and their state in /proc/clocks Show all clocks in /proc/clocks, and also show if they are enabled or disabled. This is useful to show MSTPCR bits on SuperH Mobile processors. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/clock.c | 14 +++++--------- 1 file changed, 5 insertions(+), 9 deletions(-) diff --git a/arch/sh/kernel/cpu/clock.c b/arch/sh/kernel/cpu/clock.c index 73334c689e9..f5eb56e6bc5 100644 --- a/arch/sh/kernel/cpu/clock.c +++ b/arch/sh/kernel/cpu/clock.c @@ -308,15 +308,11 @@ static int show_clocks(char *buf, char **start, off_t off, list_for_each_entry_reverse(clk, &clock_list, node) { unsigned long rate = clk_get_rate(clk); - /* - * Don't bother listing dummy clocks with no ancestry - * that only support enable and disable ops. - */ - if (unlikely(!rate && !clk->parent)) - continue; - - p += sprintf(p, "%-12s\t: %ld.%02ldMHz\n", clk->name, - rate / 1000000, (rate % 1000000) / 10000); + p += sprintf(p, "%-12s\t: %ld.%02ldMHz\t%s\n", clk->name, + rate / 1000000, (rate % 1000000) / 10000, + ((clk->flags & CLK_ALWAYS_ENABLED) || + (atomic_read(&clk->kref.refcount) != 1)) ? + "enabled" : "disabled"); } return p - buf; -- cgit v1.2.3 From de9254263b8c8b1809520a1009dd516e41976519 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 17 Jul 2008 19:09:51 +0900 Subject: sh: Introduce clk_always_enable() function Add SuperH specific funcion clk_always_enable(), useful to enable MSTPCR bits in processor or board specific code. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- include/asm-sh/clock.h | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/include/asm-sh/clock.h b/include/asm-sh/clock.h index 252f15540dd..720dfab7b15 100644 --- a/include/asm-sh/clock.h +++ b/include/asm-sh/clock.h @@ -5,6 +5,7 @@ #include #include #include +#include struct clk; @@ -47,6 +48,22 @@ void clk_recalc_rate(struct clk *); int clk_register(struct clk *); void clk_unregister(struct clk *); +static inline int clk_always_enable(const char *id) +{ + struct clk *clk; + int ret; + + clk = clk_get(NULL, id); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + ret = clk_enable(clk); + if (ret) + clk_put(clk); + + return ret; +} + /* the exported API, in addition to clk_set_rate */ /** * clk_set_rate_ex - set the clock rate for a clock source, with additional parameter -- cgit v1.2.3 From 9ca6ecac505002d0c34b47b394f39aa14b0e6fb6 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 17 Jul 2008 19:13:34 +0900 Subject: sh: Use clk_always_enable() on sh7723 / ap325rxa Use clk_always_enable() on the sh7723 processor and in the ap325rxa board code. Remove duplicate MSTPCR register definitions. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/boards/renesas/ap325rxa/setup.c | 12 ------------ arch/sh/kernel/cpu/sh4a/setup-sh7723.c | 16 ++++++++++++++++ 2 files changed, 16 insertions(+), 12 deletions(-) diff --git a/arch/sh/boards/renesas/ap325rxa/setup.c b/arch/sh/boards/renesas/ap325rxa/setup.c index f8d6d41893a..333b15cd795 100644 --- a/arch/sh/boards/renesas/ap325rxa/setup.c +++ b/arch/sh/boards/renesas/ap325rxa/setup.c @@ -97,20 +97,8 @@ static int __init ap325rxa_devices_setup(void) } device_initcall(ap325rxa_devices_setup); -#define MSTPCR0 (0xA4150030) -#define MSTPCR1 (0xA4150034) -#define MSTPCR2 (0xA4150038) - static void __init ap325rxa_setup(char **cmdline_p) { - /* enable VEU0 + VEU1 */ - ctrl_outl(ctrl_inl(MSTPCR2) & ~0x00000044, MSTPCR2); /* bit 2 + 6 */ - - /* enable MERAM */ - ctrl_outl(ctrl_inl(MSTPCR0) & ~0x00000001, MSTPCR0); /* bit 0 */ - - /* I2C */ - ctrl_outl(ctrl_inl(MSTPCR1) & ~0x00000200, MSTPCR1); } static struct sh_machine_vector mv_ap325rxa __initmv = { diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c index cb5e6f822e6..cd6baffdc89 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c @@ -13,6 +13,7 @@ #include #include #include +#include #include static struct uio_info vpu_platform_data = { @@ -230,9 +231,24 @@ static struct platform_device *sh7723_devices[] __initdata = { static int __init sh7723_devices_setup(void) { + clk_always_enable("mstp031"); /* TLB */ + clk_always_enable("mstp030"); /* IC */ + clk_always_enable("mstp029"); /* OC */ + clk_always_enable("mstp024"); /* FPU */ + clk_always_enable("mstp022"); /* INTC */ + clk_always_enable("mstp020"); /* SuperHyway */ + clk_always_enable("mstp000"); /* MERAM */ + clk_always_enable("mstp109"); /* I2C */ + clk_always_enable("mstp108"); /* RTC */ + clk_always_enable("mstp211"); /* USB */ + clk_always_enable("mstp206"); /* VEU2H1 */ + clk_always_enable("mstp202"); /* VEU2H0 */ + clk_always_enable("mstp201"); /* VPU */ + platform_resource_setup_memory(&vpu_device, "vpu", 2 << 20); platform_resource_setup_memory(&veu0_device, "veu0", 2 << 20); platform_resource_setup_memory(&veu1_device, "veu1", 2 << 20); + return platform_add_devices(sh7723_devices, ARRAY_SIZE(sh7723_devices)); } -- cgit v1.2.3 From 6c7d826cf6ff05264f9af04410aee82a08edfb9f Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 17 Jul 2008 19:16:11 +0900 Subject: sh: Use clk_always_enable() on sh7722 / Migo-R / SE7722 Use clk_always_enable() on the sh7722 processor and in the board code for Migo-R and Solution Engine 7722. Remove duplicate MSTPCR register definitions. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/boards/renesas/migor/setup.c | 7 +++---- arch/sh/boards/se/7722/setup.c | 8 +++----- arch/sh/kernel/cpu/sh4a/setup-sh7722.c | 14 ++++++++++++++ include/asm-sh/migor.h | 4 ---- include/asm-sh/se7722.h | 4 ---- 5 files changed, 20 insertions(+), 17 deletions(-) diff --git a/arch/sh/boards/renesas/migor/setup.c b/arch/sh/boards/renesas/migor/setup.c index 963c9932209..91819fb61b3 100644 --- a/arch/sh/boards/renesas/migor/setup.c +++ b/arch/sh/boards/renesas/migor/setup.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #include #include @@ -217,6 +218,8 @@ static struct i2c_board_info __initdata migor_i2c_devices[] = { static int __init migor_devices_setup(void) { + clk_always_enable("mstp214"); /* KEYSC */ + i2c_register_board_info(0, migor_i2c_devices, ARRAY_SIZE(migor_i2c_devices)); @@ -235,16 +238,12 @@ static void __init migor_setup(char **cmdline_p) ctrl_outw(ctrl_inw(PORT_PSELA) & ~0x4100, PORT_PSELA); ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x4000, PORT_HIZCRA); ctrl_outw(ctrl_inw(PORT_HIZCRC) & ~0xc000, PORT_HIZCRC); - ctrl_outl(ctrl_inl(MSTPCR2) & ~0x00004000, MSTPCR2); /* NAND Flash */ ctrl_outw(ctrl_inw(PORT_PXCR) & 0x0fff, PORT_PXCR); ctrl_outl((ctrl_inl(BSC_CS6ABCR) & ~0x00000600) | 0x00000200, BSC_CS6ABCR); - /* I2C */ - ctrl_outl(ctrl_inl(MSTPCR1) & ~0x00000200, MSTPCR1); - /* Touch Panel - Enable IRQ6 */ ctrl_outw(ctrl_inw(PORT_PZCR) & ~0xc, PORT_PZCR); ctrl_outw((ctrl_inw(PORT_PSELA) | 0x8000), PORT_PSELA); diff --git a/arch/sh/boards/se/7722/setup.c b/arch/sh/boards/se/7722/setup.c index ede3957fc14..6e228ea5978 100644 --- a/arch/sh/boards/se/7722/setup.c +++ b/arch/sh/boards/se/7722/setup.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include #include @@ -145,6 +146,8 @@ static struct platform_device *se7722_devices[] __initdata = { static int __init se7722_devices_setup(void) { + clk_always_enable("mstp214"); /* KEYSC */ + return platform_add_devices(se7722_devices, ARRAY_SIZE(se7722_devices)); } @@ -154,11 +157,6 @@ static void __init se7722_setup(char **cmdline_p) { ctrl_outw(0x010D, FPGA_OUT); /* FPGA */ - ctrl_outl(0x00051001, MSTPCR0); - ctrl_outl(0x00000000, MSTPCR1); - /* KEYSC, VOU, BEU, CEU, VEU, VPU, LCDC, USB */ - ctrl_outl(0xffffb7c0, MSTPCR2); - ctrl_outw(0x0000, PORT_PECR); /* PORT E 1 = IRQ5 ,E 0 = BS */ ctrl_outw(0x1000, PORT_PJCR); /* PORT J 1 = IRQ1,J 0 =IRQ0 */ diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c index 6015f842eda..de1ede92176 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c @@ -13,6 +13,7 @@ #include #include #include +#include #include static struct resource usbf_resources[] = { @@ -158,8 +159,21 @@ static struct platform_device *sh7722_devices[] __initdata = { static int __init sh7722_devices_setup(void) { + clk_always_enable("mstp031"); /* TLB */ + clk_always_enable("mstp030"); /* IC */ + clk_always_enable("mstp029"); /* OC */ + clk_always_enable("mstp028"); /* URAM */ + clk_always_enable("mstp026"); /* XYMEM */ + clk_always_enable("mstp022"); /* INTC */ + clk_always_enable("mstp020"); /* SuperHyway */ + clk_always_enable("mstp109"); /* I2C */ + clk_always_enable("mstp211"); /* USB */ + clk_always_enable("mstp202"); /* VEU */ + clk_always_enable("mstp201"); /* VPU */ + platform_resource_setup_memory(&vpu_device, "vpu", 1 << 20); platform_resource_setup_memory(&veu_device, "veu", 2 << 20); + return platform_add_devices(sh7722_devices, ARRAY_SIZE(sh7722_devices)); } diff --git a/include/asm-sh/migor.h b/include/asm-sh/migor.h index 2329363afdc..4c409a6dcfb 100644 --- a/include/asm-sh/migor.h +++ b/include/asm-sh/migor.h @@ -16,10 +16,6 @@ #include /* GPIO */ -#define MSTPCR0 0xa4150030 -#define MSTPCR1 0xa4150034 -#define MSTPCR2 0xa4150038 - #define PORT_PACR 0xa4050100 #define PORT_PDCR 0xa4050106 #define PORT_PECR 0xa4050108 diff --git a/include/asm-sh/se7722.h b/include/asm-sh/se7722.h index 3690fe5857a..e971d9a82f4 100644 --- a/include/asm-sh/se7722.h +++ b/include/asm-sh/se7722.h @@ -55,10 +55,6 @@ #define PA_LAN (PA_AREA6_IO + 0) /* SMC LAN91C111 */ /* GPIO */ -#define MSTPCR0 0xA4150030UL -#define MSTPCR1 0xA4150034UL -#define MSTPCR2 0xA4150038UL - #define FPGA_IN 0xb1840000UL #define FPGA_OUT 0xb1840004UL -- cgit v1.2.3 From 8fa509ab915f668093c270151f884220232bfb25 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 17 Jul 2008 19:18:24 +0900 Subject: sh: Use clk_always_enable() on sh7343 / SE77343 Use clk_always_enable() on the sh7343 processor and in the board code for Solution Engine 7343. Remove duplicate MSTPCR register definitions. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/boards/se/7343/setup.c | 4 ---- arch/sh/kernel/cpu/sh4a/setup-sh7343.c | 15 +++++++++++++++ include/asm-sh/se7343.h | 4 ---- 3 files changed, 15 insertions(+), 8 deletions(-) diff --git a/arch/sh/boards/se/7343/setup.c b/arch/sh/boards/se/7343/setup.c index 59d8d94a8c2..8ae718d6c71 100644 --- a/arch/sh/boards/se/7343/setup.c +++ b/arch/sh/boards/se/7343/setup.c @@ -114,10 +114,6 @@ static void __init sh7343se_setup(char **cmdline_p) { ctrl_outw(0xf900, FPGA_OUT); /* FPGA */ - ctrl_outl(0x00001001, MSTPCR0); - ctrl_outl(0x00000000, MSTPCR1); - ctrl_outl(0xffffbfC0, MSTPCR2); /* LCDC, BEU, CEU, VEU, KEYSC */ - ctrl_outw(0x0002, PORT_PECR); /* PORT E 1 = IRQ5 */ ctrl_outw(0x0020, PORT_PSELD); diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c index 79ce34e19a2..78881b4214d 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c @@ -12,6 +12,7 @@ #include #include #include +#include static struct resource iic0_resources[] = { [0] = { @@ -138,8 +139,22 @@ static struct platform_device *sh7343_devices[] __initdata = { static int __init sh7343_devices_setup(void) { + clk_always_enable("mstp031"); /* TLB */ + clk_always_enable("mstp030"); /* IC */ + clk_always_enable("mstp029"); /* OC */ + clk_always_enable("mstp028"); /* URAM */ + clk_always_enable("mstp026"); /* XYMEM */ + clk_always_enable("mstp023"); /* INTC3 */ + clk_always_enable("mstp022"); /* INTC */ + clk_always_enable("mstp020"); /* SuperHyway */ + clk_always_enable("mstp109"); /* I2C0 */ + clk_always_enable("mstp108"); /* I2C1 */ + clk_always_enable("mstp202"); /* VEU */ + clk_always_enable("mstp201"); /* VPU */ + platform_resource_setup_memory(&vpu_device, "vpu", 1 << 20); platform_resource_setup_memory(&veu_device, "veu", 2 << 20); + return platform_add_devices(sh7343_devices, ARRAY_SIZE(sh7343_devices)); } diff --git a/include/asm-sh/se7343.h b/include/asm-sh/se7343.h index 8d2af779fbc..98458460e63 100644 --- a/include/asm-sh/se7343.h +++ b/include/asm-sh/se7343.h @@ -115,10 +115,6 @@ #define PORT_PWDR 0xA4050166 #define PORT_PYDR 0xA4050168 -#define MSTPCR0 0xA4150030 -#define MSTPCR1 0xA4150034 -#define MSTPCR2 0xA4150038 - #define FPGA_IN 0xb1400000 #define FPGA_OUT 0xb1400002 -- cgit v1.2.3 From d7f1a9adc0e34ad4aa4fe246b264add4646ae064 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 17 Jul 2008 19:20:11 +0900 Subject: sh: Use clk_always_enable() on sh7366 Use clk_always_enable() in the sh7366 processor code. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/sh4a/setup-sh7366.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c index 7ee01757f3f..6851dba02f3 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c @@ -14,6 +14,7 @@ #include #include #include +#include static struct resource iic_resources[] = { [0] = { @@ -148,9 +149,23 @@ static struct platform_device *sh7366_devices[] __initdata = { static int __init sh7366_devices_setup(void) { + clk_always_enable("mstp031"); /* TLB */ + clk_always_enable("mstp030"); /* IC */ + clk_always_enable("mstp029"); /* OC */ + clk_always_enable("mstp028"); /* RSMEM */ + clk_always_enable("mstp026"); /* XYMEM */ + clk_always_enable("mstp023"); /* INTC3 */ + clk_always_enable("mstp022"); /* INTC */ + clk_always_enable("mstp020"); /* SuperHyway */ + clk_always_enable("mstp109"); /* I2C */ + clk_always_enable("mstp207"); /* VEU-2 */ + clk_always_enable("mstp202"); /* VEU-1 */ + clk_always_enable("mstp201"); /* VPU */ + platform_resource_setup_memory(&vpu_device, "vpu", 2 << 20); platform_resource_setup_memory(&veu0_device, "veu0", 2 << 20); platform_resource_setup_memory(&veu1_device, "veu1", 2 << 20); + return platform_add_devices(sh7366_devices, ARRAY_SIZE(sh7366_devices)); } -- cgit v1.2.3 From 0b1689cfbbc5e81a121f550782a201962c1e0ce0 Mon Sep 17 00:00:00 2001 From: Stuart MENEFY Date: Thu, 17 Jul 2008 13:08:40 +0100 Subject: sh: Don't miss pending signals returning to user mode after signal processing Without this patch, signals sent during architecture specific signal handling (typically as a result of the user's stack being inaccessible) are ignored. This is the SH version of commit c3ff8ec31c1249d268cd11390649768a12bec1b9 which was for the i386. Signed-off-by: Stuart Menefy Signed-off-by: Paul Mundt --- arch/sh/kernel/entry-common.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/sh/kernel/entry-common.S b/arch/sh/kernel/entry-common.S index 718bd2356b3..5e0dd193384 100644 --- a/arch/sh/kernel/entry-common.S +++ b/arch/sh/kernel/entry-common.S @@ -192,7 +192,7 @@ work_resched: .align 2 1: .long schedule 2: .long do_notify_resume -3: .long restore_all +3: .long resume_userspace #ifdef CONFIG_TRACE_IRQFLAGS 4: .long trace_hardirqs_on 5: .long trace_hardirqs_off -- cgit v1.2.3 From d3aa43a9db3b18e65f91985b5b91f2450d8b4048 Mon Sep 17 00:00:00 2001 From: Tetsuya Mukawa Date: Sat, 19 Jul 2008 07:46:53 +0900 Subject: sh_keysc: remove request_mem_region() and release_mem_region() Remove request_mem_region() and release_mem_region() from sh_keysc driver. Those functions can find resource conflict, but it is already checked in platform_device_add(). Signed-off-by: Tetsuya Mukawa Signed-off-by: Magnus Damm Signed-off-by: Andrew Morton Cc: Dmitry Torokhov Signed-off-by: Paul Mundt --- drivers/input/keyboard/sh_keysc.c | 27 +++++++-------------------- 1 file changed, 7 insertions(+), 20 deletions(-) diff --git a/drivers/input/keyboard/sh_keysc.c b/drivers/input/keyboard/sh_keysc.c index 8486abc457e..c600ab7f93e 100644 --- a/drivers/input/keyboard/sh_keysc.c +++ b/drivers/input/keyboard/sh_keysc.c @@ -158,25 +158,18 @@ static int __devinit sh_keysc_probe(struct platform_device *pdev) memcpy(&priv->pdata, pdev->dev.platform_data, sizeof(priv->pdata)); pdata = &priv->pdata; - res = request_mem_region(res->start, res_size(res), pdev->name); - if (res == NULL) { - dev_err(&pdev->dev, "failed to request I/O memory\n"); - error = -EBUSY; - goto err1; - } - priv->iomem_base = ioremap_nocache(res->start, res_size(res)); if (priv->iomem_base == NULL) { dev_err(&pdev->dev, "failed to remap I/O memory\n"); error = -ENXIO; - goto err2; + goto err1; } priv->input = input_allocate_device(); if (!priv->input) { dev_err(&pdev->dev, "failed to allocate input device\n"); error = -ENOMEM; - goto err3; + goto err2; } input = priv->input; @@ -194,7 +187,7 @@ static int __devinit sh_keysc_probe(struct platform_device *pdev) error = request_irq(irq, sh_keysc_isr, 0, pdev->name, pdev); if (error) { dev_err(&pdev->dev, "failed to request IRQ\n"); - goto err4; + goto err3; } for (i = 0; i < SH_KEYSC_MAXKEYS; i++) { @@ -206,7 +199,7 @@ static int __devinit sh_keysc_probe(struct platform_device *pdev) error = input_register_device(input); if (error) { dev_err(&pdev->dev, "failed to register input device\n"); - goto err5; + goto err4; } iowrite16((sh_keysc_mode[pdata->mode].kymd << 8) | @@ -214,14 +207,12 @@ static int __devinit sh_keysc_probe(struct platform_device *pdev) iowrite16(0, priv->iomem_base + KYOUTDR_OFFS); iowrite16(KYCR2_IRQ_LEVEL, priv->iomem_base + KYCR2_OFFS); return 0; - err5: - free_irq(irq, pdev); err4: - input_free_device(input); + free_irq(irq, pdev); err3: - iounmap(priv->iomem_base); + input_free_device(input); err2: - release_mem_region(res->start, res_size(res)); + iounmap(priv->iomem_base); err1: platform_set_drvdata(pdev, NULL); kfree(priv); @@ -232,7 +223,6 @@ static int __devinit sh_keysc_probe(struct platform_device *pdev) static int __devexit sh_keysc_remove(struct platform_device *pdev) { struct sh_keysc_priv *priv = platform_get_drvdata(pdev); - struct resource *res; iowrite16(KYCR2_IRQ_DISABLED, priv->iomem_base + KYCR2_OFFS); @@ -240,9 +230,6 @@ static int __devexit sh_keysc_remove(struct platform_device *pdev) free_irq(platform_get_irq(pdev, 0), pdev); iounmap(priv->iomem_base); - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - release_mem_region(res->start, res_size(res)); - platform_set_drvdata(pdev, NULL); kfree(priv); return 0; -- cgit v1.2.3 From 82cb1f6fb3f69518eaa4ab9c0fa7eabc253ad26f Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Wed, 23 Jul 2008 16:49:06 +0900 Subject: sh: fix uImage Entry Point fix the problem that cannot boot using uImage when PAGE_SIZE is 8kbyte or 64kbyte. Signed-off-by: Yoshihiro Shimoda Signed-off-by: Paul Mundt --- arch/sh/boot/Makefile | 2 +- arch/sh/mm/Kconfig | 8 ++++++++ 2 files changed, 9 insertions(+), 1 deletion(-) diff --git a/arch/sh/boot/Makefile b/arch/sh/boot/Makefile index 89b408620dc..8b37869a822 100644 --- a/arch/sh/boot/Makefile +++ b/arch/sh/boot/Makefile @@ -40,7 +40,7 @@ KERNEL_LOAD := $(shell /bin/bash -c 'printf "0x%08x" \ KERNEL_ENTRY := $(shell /bin/bash -c 'printf "0x%08x" \ $$[$(CONFIG_PAGE_OFFSET) + \ $(CONFIG_MEMORY_START) + \ - $(CONFIG_ZERO_PAGE_OFFSET)+0x1000]') + $(CONFIG_ZERO_PAGE_OFFSET) + $(CONFIG_ENTRY_OFFSET)]') quiet_cmd_uimage = UIMAGE $@ cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A sh -O linux -T kernel \ diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig index 29d8e3c58b3..56d0a7daa34 100644 --- a/arch/sh/mm/Kconfig +++ b/arch/sh/mm/Kconfig @@ -170,6 +170,14 @@ config PAGE_SIZE_64KB endchoice +config ENTRY_OFFSET + hex + default "0x00001000" if PAGE_SIZE_4KB + default "0x00002000" if PAGE_SIZE_8KB + default "0x00004000" if PAGE_SIZE_16KB + default "0x00010000" if PAGE_SIZE_64KB + default "0x00000000" + choice prompt "HugeTLB page size" depends on HUGETLB_PAGE && (CPU_SH4 || CPU_SH5) && MMU -- cgit v1.2.3 From 44f95989525c48f6c79fe1c6ad07860765f987cd Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 28 Jul 2008 18:34:45 +0900 Subject: sh: Wire up new syscalls. This wires up the signalfd4, eventfd2, epoll_create1, dup3, pipe2, and inotify_init1 syscalls. Signed-off-by: Paul Mundt --- arch/sh/kernel/syscalls_32.S | 6 ++++++ arch/sh/kernel/syscalls_64.S | 6 ++++++ include/asm-sh/unistd_32.h | 8 +++++++- include/asm-sh/unistd_64.h | 8 +++++++- 4 files changed, 26 insertions(+), 2 deletions(-) diff --git a/arch/sh/kernel/syscalls_32.S b/arch/sh/kernel/syscalls_32.S index a46cc3a4114..0af693e6576 100644 --- a/arch/sh/kernel/syscalls_32.S +++ b/arch/sh/kernel/syscalls_32.S @@ -343,3 +343,9 @@ ENTRY(sys_call_table) .long sys_fallocate .long sys_timerfd_settime /* 325 */ .long sys_timerfd_gettime + .long sys_signalfd4 + .long sys_eventfd2 + .long sys_epoll_create1 + .long sys_dup3 /* 330 */ + .long sys_pipe2 + .long sys_inotify_init1 diff --git a/arch/sh/kernel/syscalls_64.S b/arch/sh/kernel/syscalls_64.S index d5d7843aad9..0b436aa3cad 100644 --- a/arch/sh/kernel/syscalls_64.S +++ b/arch/sh/kernel/syscalls_64.S @@ -381,3 +381,9 @@ sys_call_table: .long sys_fallocate .long sys_timerfd_settime .long sys_timerfd_gettime + .long sys_signalfd4 /* 355 */ + .long sys_eventfd2 + .long sys_epoll_create1 + .long sys_dup3 + .long sys_pipe2 + .long sys_inotify_init1 /* 360 */ diff --git a/include/asm-sh/unistd_32.h b/include/asm-sh/unistd_32.h index 0b07212ec65..d52c000cf92 100644 --- a/include/asm-sh/unistd_32.h +++ b/include/asm-sh/unistd_32.h @@ -335,8 +335,14 @@ #define __NR_fallocate 324 #define __NR_timerfd_settime 325 #define __NR_timerfd_gettime 326 +#define __NR_signalfd4 327 +#define __NR_eventfd2 328 +#define __NR_epoll_create1 329 +#define __NR_dup3 330 +#define __NR_pipe2 331 +#define __NR_inotify_init1 332 -#define NR_syscalls 327 +#define NR_syscalls 333 #ifdef __KERNEL__ diff --git a/include/asm-sh/unistd_64.h b/include/asm-sh/unistd_64.h index 9d21eab5242..7c54e91753c 100644 --- a/include/asm-sh/unistd_64.h +++ b/include/asm-sh/unistd_64.h @@ -375,10 +375,16 @@ #define __NR_fallocate 352 #define __NR_timerfd_settime 353 #define __NR_timerfd_gettime 354 +#define __NR_signalfd4 355 +#define __NR_eventfd2 356 +#define __NR_epoll_create1 357 +#define __NR_dup3 358 +#define __NR_pipe2 359 +#define __NR_inotify_init1 360 #ifdef __KERNEL__ -#define NR_syscalls 353 +#define NR_syscalls 361 #define __ARCH_WANT_IPC_PARSE_VERSION #define __ARCH_WANT_OLD_READDIR -- cgit v1.2.3 From 2b4b2bb42137c779ef0084de5df66ff21b4cd86e Mon Sep 17 00:00:00 2001 From: Yoshinori Sato Date: Mon, 28 Jul 2008 18:36:13 +0900 Subject: sh: Workaround for __put_user_asm() bug with gcc 4.x on big-endian. I think this problem is GCC(4.1.2) bug. Syscall "getdents" returned "dirent->d_off" is always 0. I think other EB enviroment have same problem. Problem code 0c03c954 : : c03c97a: 58 f7 mov.l @(28,r15),r8 !-> offset (high) c03c97c: 59 f8 mov.l @(32,r15),r9 !-> offset (low) c03c97e: 53 f9 mov.l @(36,r15),r3 c03c980: 54 fa mov.l @(40,r15),r4 : c03c9a0: 21 82 mov.l r8,@r1 !offset(high) -> dirent->d_off It's workaround patch. Signed-off-by: Yoshinori Sato Signed-off-by: Paul Mundt --- include/asm-sh/uaccess_32.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/include/asm-sh/uaccess_32.h b/include/asm-sh/uaccess_32.h index ae0d24f6653..892fd6dea9d 100644 --- a/include/asm-sh/uaccess_32.h +++ b/include/asm-sh/uaccess_32.h @@ -76,7 +76,8 @@ do { \ __put_user_asm(x, ptr, retval, "w"); \ break; \ case 4: \ - __put_user_asm(x, ptr, retval, "l"); \ + __put_user_asm((u32)x, ptr, \ + retval, "l"); \ break; \ case 8: \ __put_user_u64(x, ptr, retval); \ -- cgit v1.2.3 From 761656e6beecb38c723f207d7408c753d3103ba8 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 28 Jul 2008 18:39:25 +0900 Subject: sh: Move asid_cache() out of ifdef to fix SH-3/4 nommu build. Signed-off-by: Paul Mundt --- include/asm-sh/mmu_context.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/include/asm-sh/mmu_context.h b/include/asm-sh/mmu_context.h index 87e812f68bb..8589a50febd 100644 --- a/include/asm-sh/mmu_context.h +++ b/include/asm-sh/mmu_context.h @@ -27,8 +27,9 @@ /* ASID is 8-bit value, so it can't be 0x100 */ #define MMU_NO_ASID 0x100 -#ifdef CONFIG_MMU #define asid_cache(cpu) (cpu_data[cpu].asid_cache) + +#ifdef CONFIG_MMU #define cpu_context(cpu, mm) ((mm)->context.id[cpu]) #define cpu_asid(cpu, mm) \ -- cgit v1.2.3 From 8b1285f1c192e7e84ba28cc25eb0e9bcf2dadb17 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Mon, 28 Jul 2008 18:47:30 +0900 Subject: sh: Add SuperH Mobile LCDC platform data for Migo-R Add WVGA and QVGA LCD panel support to Migo-R. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/Kconfig | 1 + arch/sh/boards/renesas/migor/Kconfig | 15 +++ arch/sh/boards/renesas/migor/Makefile | 1 + arch/sh/boards/renesas/migor/lcd_qvga.c | 165 ++++++++++++++++++++++++++++++++ arch/sh/boards/renesas/migor/setup.c | 96 +++++++++++++++++++ include/asm-sh/migor.h | 6 ++ 6 files changed, 284 insertions(+) create mode 100644 arch/sh/boards/renesas/migor/Kconfig create mode 100644 arch/sh/boards/renesas/migor/lcd_qvga.c diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index a90b73f72f3..7bfb0d219d6 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -592,6 +592,7 @@ endmenu source "arch/sh/boards/renesas/rts7751r2d/Kconfig" source "arch/sh/boards/renesas/r7780rp/Kconfig" source "arch/sh/boards/renesas/sdk7780/Kconfig" +source "arch/sh/boards/renesas/migor/Kconfig" source "arch/sh/boards/magicpanelr2/Kconfig" menu "Timer and clock configuration" diff --git a/arch/sh/boards/renesas/migor/Kconfig b/arch/sh/boards/renesas/migor/Kconfig new file mode 100644 index 00000000000..a7b3b728ec3 --- /dev/null +++ b/arch/sh/boards/renesas/migor/Kconfig @@ -0,0 +1,15 @@ +if SH_MIGOR + +choice + prompt "Migo-R LCD Panel Board Selection" + default SH_MIGOR_QVGA + +config SH_MIGOR_QVGA + bool "QVGA (320x240)" + +config SH_MIGOR_RTA_WVGA + bool "RTA WVGA (800x480)" + +endchoice + +endif diff --git a/arch/sh/boards/renesas/migor/Makefile b/arch/sh/boards/renesas/migor/Makefile index 77037567633..5f231dd25c0 100644 --- a/arch/sh/boards/renesas/migor/Makefile +++ b/arch/sh/boards/renesas/migor/Makefile @@ -1 +1,2 @@ obj-y := setup.o +obj-$(CONFIG_SH_MIGOR_QVGA) += lcd_qvga.o diff --git a/arch/sh/boards/renesas/migor/lcd_qvga.c b/arch/sh/boards/renesas/migor/lcd_qvga.c new file mode 100644 index 00000000000..6e960959644 --- /dev/null +++ b/arch/sh/boards/renesas/migor/lcd_qvga.c @@ -0,0 +1,165 @@ +/* + * Support for SuperH MigoR Quarter VGA LCD Panel + * + * Copyright (C) 2008 Magnus Damm + * + * Based on lcd_powertip.c from Kenati Technologies Pvt Ltd. + * Copyright (c) 2007 Ujjwal Pande , + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +/* LCD Module is a PH240320T according to board schematics. This module + * is made up of a 240x320 LCD hooked up to a R61505U (or HX8347-A01?) + * Driver IC. This IC is connected to the SH7722 built-in LCDC using a + * SYS-80 interface configured in 16 bit mode. + * + * Index 0: "Device Code Read" returns 0x1505. + */ + +static void reset_lcd_module(void) +{ + ctrl_outb(ctrl_inb(PORT_PHDR) & ~0x04, PORT_PHDR); + mdelay(2); + ctrl_outb(ctrl_inb(PORT_PHDR) | 0x04, PORT_PHDR); + mdelay(1); +} + +/* DB0-DB7 are connected to D1-D8, and DB8-DB15 to D10-D17 */ + +static unsigned long adjust_reg18(unsigned short data) +{ + unsigned long tmp1, tmp2; + + tmp1 = (data<<1 | 0x00000001) & 0x000001FF; + tmp2 = (data<<2 | 0x00000200) & 0x0003FE00; + return tmp1 | tmp2; +} + +static void write_reg(void *sys_ops_handle, + struct sh_mobile_lcdc_sys_bus_ops *sys_ops, + unsigned short reg, unsigned short data) +{ + sys_ops->write_index(sys_ops_handle, adjust_reg18(reg << 8 | data)); +} + +static void write_reg16(void *sys_ops_handle, + struct sh_mobile_lcdc_sys_bus_ops *sys_ops, + unsigned short reg, unsigned short data) +{ + sys_ops->write_index(sys_ops_handle, adjust_reg18(reg)); + sys_ops->write_data(sys_ops_handle, adjust_reg18(data)); +} + +static unsigned long read_reg16(void *sys_ops_handle, + struct sh_mobile_lcdc_sys_bus_ops *sys_ops, + unsigned short reg) +{ + unsigned long data; + + sys_ops->write_index(sys_ops_handle, adjust_reg18(reg)); + data = sys_ops->read_data(sys_ops_handle); + return ((data >> 1) & 0xff) | ((data >> 2) & 0xff00); +} + +static void migor_lcd_qvga_seq(void *sys_ops_handle, + struct sh_mobile_lcdc_sys_bus_ops *sys_ops, + unsigned short const *data, int no_data) +{ + int i; + + for (i = 0; i < no_data; i += 2) + write_reg16(sys_ops_handle, sys_ops, data[i], data[i + 1]); +} + +static const unsigned short sync_data[] = { + 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, +}; + +static const unsigned short magic0_data[] = { + 0x0060, 0x2700, 0x0008, 0x0808, 0x0090, 0x001A, 0x0007, 0x0001, + 0x0017, 0x0001, 0x0019, 0x0000, 0x0010, 0x17B0, 0x0011, 0x0116, + 0x0012, 0x0198, 0x0013, 0x1400, 0x0029, 0x000C, 0x0012, 0x01B8, +}; + +static const unsigned short magic1_data[] = { + 0x0030, 0x0307, 0x0031, 0x0303, 0x0032, 0x0603, 0x0033, 0x0202, + 0x0034, 0x0202, 0x0035, 0x0202, 0x0036, 0x1F1F, 0x0037, 0x0303, + 0x0038, 0x0303, 0x0039, 0x0603, 0x003A, 0x0202, 0x003B, 0x0102, + 0x003C, 0x0204, 0x003D, 0x0000, 0x0001, 0x0100, 0x0002, 0x0300, + 0x0003, 0x5028, 0x0020, 0x00ef, 0x0021, 0x0000, 0x0004, 0x0000, + 0x0009, 0x0000, 0x000A, 0x0008, 0x000C, 0x0000, 0x000D, 0x0000, + 0x0015, 0x8000, +}; + +static const unsigned short magic2_data[] = { + 0x0061, 0x0001, 0x0092, 0x0100, 0x0093, 0x0001, 0x0007, 0x0021, +}; + +static const unsigned short magic3_data[] = { + 0x0010, 0x16B0, 0x0011, 0x0111, 0x0007, 0x0061, +}; + +int migor_lcd_qvga_setup(void *board_data, void *sohandle, + struct sh_mobile_lcdc_sys_bus_ops *so) +{ + unsigned long xres = 320; + unsigned long yres = 240; + int k; + + reset_lcd_module(); + migor_lcd_qvga_seq(sohandle, so, sync_data, ARRAY_SIZE(sync_data)); + + if (read_reg16(sohandle, so, 0) != 0x1505) + return -ENODEV; + + pr_info("Migo-R QVGA LCD Module detected.\n"); + + migor_lcd_qvga_seq(sohandle, so, sync_data, ARRAY_SIZE(sync_data)); + write_reg16(sohandle, so, 0x00A4, 0x0001); + mdelay(10); + + migor_lcd_qvga_seq(sohandle, so, magic0_data, ARRAY_SIZE(magic0_data)); + mdelay(100); + + migor_lcd_qvga_seq(sohandle, so, magic1_data, ARRAY_SIZE(magic1_data)); + write_reg16(sohandle, so, 0x0050, 0xef - (yres - 1)); + write_reg16(sohandle, so, 0x0051, 0x00ef); + write_reg16(sohandle, so, 0x0052, 0x0000); + write_reg16(sohandle, so, 0x0053, xres - 1); + + migor_lcd_qvga_seq(sohandle, so, magic2_data, ARRAY_SIZE(magic2_data)); + mdelay(10); + + migor_lcd_qvga_seq(sohandle, so, magic3_data, ARRAY_SIZE(magic3_data)); + mdelay(40); + + /* clear GRAM to avoid displaying garbage */ + + write_reg16(sohandle, so, 0x0020, 0x0000); /* horiz addr */ + write_reg16(sohandle, so, 0x0021, 0x0000); /* vert addr */ + + for (k = 0; k < (xres * 256); k++) /* yes, 256 words per line */ + write_reg16(sohandle, so, 0x0022, 0x0000); + + write_reg16(sohandle, so, 0x0020, 0x0000); /* reset horiz addr */ + write_reg16(sohandle, so, 0x0021, 0x0000); /* reset vert addr */ + write_reg16(sohandle, so, 0x0007, 0x0173); + mdelay(40); + + /* enable display */ + write_reg(sohandle, so, 0x00, 0x22); + mdelay(100); + return 0; +} diff --git a/arch/sh/boards/renesas/migor/setup.c b/arch/sh/boards/renesas/migor/setup.c index 91819fb61b3..28f7ab489c4 100644 --- a/arch/sh/boards/renesas/migor/setup.c +++ b/arch/sh/boards/renesas/migor/setup.c @@ -19,6 +19,7 @@ #include #include #include +#include #include /* Address IRQ Size Bus Description @@ -199,9 +200,80 @@ static struct platform_device migor_nand_flash_device = { } }; +static struct sh_mobile_lcdc_info sh_mobile_lcdc_info = { +#ifdef CONFIG_SH_MIGOR_RTA_WVGA + .clock_source = LCDC_CLK_BUS, + .ch[0] = { + .chan = LCDC_CHAN_MAINLCD, + .bpp = 16, + .interface_type = RGB16, + .clock_divider = 2, + .lcd_cfg = { + .name = "LB070WV1", + .xres = 800, + .yres = 480, + .left_margin = 64, + .right_margin = 16, + .hsync_len = 120, + .upper_margin = 1, + .lower_margin = 17, + .vsync_len = 2, + .sync = 0, + }, + } +#endif +#ifdef CONFIG_SH_MIGOR_QVGA + .clock_source = LCDC_CLK_PERIPHERAL, + .ch[0] = { + .chan = LCDC_CHAN_MAINLCD, + .bpp = 16, + .interface_type = SYS16A, + .clock_divider = 10, + .lcd_cfg = { + .name = "PH240320T", + .xres = 320, + .yres = 240, + .left_margin = 0, + .right_margin = 16, + .hsync_len = 8, + .upper_margin = 1, + .lower_margin = 17, + .vsync_len = 2, + .sync = FB_SYNC_HOR_HIGH_ACT, + }, + .board_cfg = { + .setup_sys = migor_lcd_qvga_setup, + }, + .sys_bus_cfg = { + .ldmt2r = 0x06000a09, + .ldmt3r = 0x180e3418, + }, + } +#endif +}; + +static struct resource migor_lcdc_resources[] = { + [0] = { + .name = "LCDC", + .start = 0xfe940000, /* P4-only space */ + .end = 0xfe941fff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device migor_lcdc_device = { + .name = "sh_mobile_lcdc_fb", + .num_resources = ARRAY_SIZE(migor_lcdc_resources), + .resource = migor_lcdc_resources, + .dev = { + .platform_data = &sh_mobile_lcdc_info, + }, +}; + static struct platform_device *migor_devices[] __initdata = { &smc91x_eth_device, &sh_keysc_device, + &migor_lcdc_device, &migor_nor_flash_device, &migor_nand_flash_device, }; @@ -219,6 +291,7 @@ static struct i2c_board_info __initdata migor_i2c_devices[] = { static int __init migor_devices_setup(void) { clk_always_enable("mstp214"); /* KEYSC */ + clk_always_enable("mstp200"); /* LCDC */ i2c_register_board_info(0, migor_i2c_devices, ARRAY_SIZE(migor_i2c_devices)); @@ -248,6 +321,29 @@ static void __init migor_setup(char **cmdline_p) ctrl_outw(ctrl_inw(PORT_PZCR) & ~0xc, PORT_PZCR); ctrl_outw((ctrl_inw(PORT_PSELA) | 0x8000), PORT_PSELA); ctrl_outw((ctrl_inw(PORT_HIZCRC) & ~0x4000), PORT_HIZCRC); + +#ifdef CONFIG_SH_MIGOR_RTA_WVGA + /* LCDC - WVGA - Enable RGB Interface signals */ + ctrl_outw(ctrl_inw(PORT_PACR) & ~0x0003, PORT_PACR); + ctrl_outw(0x0000, PORT_PHCR); + ctrl_outw(0x0000, PORT_PLCR); + ctrl_outw(0x0000, PORT_PMCR); + ctrl_outw(ctrl_inw(PORT_PRCR) & ~0x000f, PORT_PRCR); + ctrl_outw((ctrl_inw(PORT_PSELD) & ~0x000d) | 0x0400, PORT_PSELD); + ctrl_outw(ctrl_inw(PORT_MSELCRB) & ~0x0100, PORT_MSELCRB); + ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x01e0, PORT_HIZCRA); +#endif +#ifdef CONFIG_SH_MIGOR_QVGA + /* LCDC - QVGA - Enable SYS Interface signals */ + ctrl_outw(ctrl_inw(PORT_PACR) & ~0x0003, PORT_PACR); + ctrl_outw((ctrl_inw(PORT_PHCR) & ~0xcfff) | 0x0010, PORT_PHCR); + ctrl_outw(0x0000, PORT_PLCR); + ctrl_outw(0x0000, PORT_PMCR); + ctrl_outw(ctrl_inw(PORT_PRCR) & ~0x030f, PORT_PRCR); + ctrl_outw((ctrl_inw(PORT_PSELD) & ~0x0001) | 0x0420, PORT_PSELD); + ctrl_outw(ctrl_inw(PORT_MSELCRB) | 0x0100, PORT_MSELCRB); + ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x01e0, PORT_HIZCRA); +#endif } static struct sh_machine_vector mv_migor __initmv = { diff --git a/include/asm-sh/migor.h b/include/asm-sh/migor.h index 4c409a6dcfb..e9f8e9b15f4 100644 --- a/include/asm-sh/migor.h +++ b/include/asm-sh/migor.h @@ -30,6 +30,7 @@ #define PORT_PYCR 0xa405014a #define PORT_PZCR 0xa405014c #define PORT_PADR 0xa4050120 +#define PORT_PHDR 0xa405012e #define PORT_PWDR 0xa4050166 #define PORT_HIZCRA 0xa4050158 @@ -51,4 +52,9 @@ #define BSC_CS6ABCR 0xfec1001c +#include + +int migor_lcd_qvga_setup(void *board_data, void *sys_ops_handle, + struct sh_mobile_lcdc_sys_bus_ops *sys_ops); + #endif /* __ASM_SH_MIGOR_H */ -- cgit v1.2.3 From 1765534c23596794385f309609c09642f33846e4 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Mon, 28 Jul 2008 18:51:01 +0900 Subject: sh: Add SuperH Mobile CEU platform data for Migo-R Add Migo-R specific platform data for on-chip sh7722 CEU and ov772x camera. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/boards/renesas/migor/setup.c | 173 ++++++++++++++++++++++++++++++++++- include/asm-sh/migor.h | 5 + 2 files changed, 177 insertions(+), 1 deletion(-) diff --git a/arch/sh/boards/renesas/migor/setup.c b/arch/sh/boards/renesas/migor/setup.c index 28f7ab489c4..7bd365ad2d0 100644 --- a/arch/sh/boards/renesas/migor/setup.c +++ b/arch/sh/boards/renesas/migor/setup.c @@ -15,6 +15,10 @@ #include #include #include +#include +#include +#include +#include #include #include #include @@ -270,15 +274,167 @@ static struct platform_device migor_lcdc_device = { }, }; +static struct clk *camera_clk; + +static void camera_power_on(void) +{ + unsigned char value; + + camera_clk = clk_get(NULL, "video_clk"); + clk_set_rate(camera_clk, 24000000); + clk_enable(camera_clk); /* start VIO_CKO */ + + mdelay(10); + value = ctrl_inb(PORT_PTDR); + value &= ~0x09; +#ifndef CONFIG_SH_MIGOR_RTA_WVGA + value |= 0x01; +#endif + ctrl_outb(value, PORT_PTDR); + mdelay(10); + + ctrl_outb(value | 8, PORT_PTDR); +} + +static void camera_power_off(void) +{ + clk_disable(camera_clk); /* stop VIO_CKO */ + clk_put(camera_clk); + + ctrl_outb(ctrl_inb(PORT_PTDR) & ~0x08, PORT_PTDR); +} + +static unsigned char camera_ov772x_magic[] = +{ + 0x09, 0x01, 0x0c, 0x10, 0x0d, 0x41, 0x0e, 0x01, + 0x12, 0x00, 0x13, 0x8F, 0x14, 0x4A, 0x15, 0x00, + 0x16, 0x00, 0x17, 0x23, 0x18, 0xa0, 0x19, 0x07, + 0x1a, 0xf0, 0x1b, 0x40, 0x1f, 0x00, 0x20, 0x10, + 0x22, 0xff, 0x23, 0x01, 0x28, 0x00, 0x29, 0xa0, + 0x2a, 0x00, 0x2b, 0x00, 0x2c, 0xf0, 0x2d, 0x00, + 0x2e, 0x00, 0x30, 0x80, 0x31, 0x60, 0x32, 0x00, + 0x33, 0x00, 0x34, 0x00, 0x3d, 0x80, 0x3e, 0xe2, + 0x3f, 0x1f, 0x42, 0x80, 0x43, 0x80, 0x44, 0x80, + 0x45, 0x80, 0x46, 0x00, 0x47, 0x00, 0x48, 0x00, + 0x49, 0x50, 0x4a, 0x30, 0x4b, 0x50, 0x4c, 0x50, + 0x4d, 0x00, 0x4e, 0xef, 0x4f, 0x10, 0x50, 0x60, + 0x51, 0x00, 0x52, 0x00, 0x53, 0x24, 0x54, 0x7a, + 0x55, 0xfc, 0x62, 0xff, 0x63, 0xf0, 0x64, 0x1f, + 0x65, 0x00, 0x66, 0x10, 0x67, 0x00, 0x68, 0x00, + 0x69, 0x5c, 0x6a, 0x11, 0x6b, 0xa2, 0x6c, 0x01, + 0x6d, 0x50, 0x6e, 0x80, 0x6f, 0x80, 0x70, 0x0f, + 0x71, 0x00, 0x72, 0x00, 0x73, 0x0f, 0x74, 0x0f, + 0x75, 0xff, 0x78, 0x10, 0x79, 0x70, 0x7a, 0x70, + 0x7b, 0xf0, 0x7c, 0xf0, 0x7d, 0xf0, 0x7e, 0x0e, + 0x7f, 0x1a, 0x80, 0x31, 0x81, 0x5a, 0x82, 0x69, + 0x83, 0x75, 0x84, 0x7e, 0x85, 0x88, 0x86, 0x8f, + 0x87, 0x96, 0x88, 0xa3, 0x89, 0xaf, 0x8a, 0xc4, + 0x8b, 0xd7, 0x8c, 0xe8, 0x8d, 0x20, 0x8e, 0x00, + 0x8f, 0x00, 0x90, 0x08, 0x91, 0x10, 0x92, 0x1f, + 0x93, 0x01, 0x94, 0x2c, 0x95, 0x24, 0x96, 0x08, + 0x97, 0x14, 0x98, 0x24, 0x99, 0x38, 0x9a, 0x9e, + 0x9b, 0x00, 0x9c, 0x40, 0x9e, 0x11, 0x9f, 0x02, + 0xa0, 0x00, 0xa1, 0x40, 0xa2, 0x40, 0xa3, 0x06, + 0xa4, 0x00, 0xa6, 0x00, 0xa7, 0x40, 0xa8, 0x40, + 0xa9, 0x80, 0xaa, 0x80, 0xab, 0x06, 0xac, 0xff, + 0x12, 0x06, 0x64, 0x3f, 0x12, 0x46, 0x17, 0x3f, + 0x18, 0x50, 0x19, 0x03, 0x1a, 0x78, 0x29, 0x50, + 0x2c, 0x78, +}; + +static int ov772x_set_capture(struct soc_camera_platform_info *info, + int enable) +{ + struct i2c_adapter *a = i2c_get_adapter(0); + struct i2c_msg msg; + int ret = 0; + int i; + + if (!enable) + return 0; /* camera_power_off() is enough */ + + for (i = 0; i < ARRAY_SIZE(camera_ov772x_magic); i += 2) { + u_int8_t buf[8]; + + msg.addr = 0x21; + msg.buf = buf; + msg.len = 2; + msg.flags = 0; + + buf[0] = camera_ov772x_magic[i]; + buf[1] = camera_ov772x_magic[i + 1]; + + ret = (ret < 0) ? ret : i2c_transfer(a, &msg, 1); + } + + return ret; +} + +static struct soc_camera_platform_info ov772x_info = { + .iface = 0, + .format_name = "RGB565", + .format_depth = 16, + .format = { + .pixelformat = V4L2_PIX_FMT_RGB565, + .colorspace = V4L2_COLORSPACE_SRGB, + .width = 320, + .height = 240, + }, + .bus_param = SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH | + SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_DATAWIDTH_8, + .set_capture = ov772x_set_capture, +}; + +static struct platform_device migor_camera_device = { + .name = "soc_camera_platform", + .dev = { + .platform_data = &ov772x_info, + }, +}; + +static struct sh_mobile_ceu_info sh_mobile_ceu_info = { + .flags = SOCAM_MASTER | SOCAM_DATAWIDTH_8 | SOCAM_PCLK_SAMPLE_RISING \ + | SOCAM_HSYNC_ACTIVE_HIGH | SOCAM_VSYNC_ACTIVE_HIGH, + .enable_camera = camera_power_on, + .disable_camera = camera_power_off, +}; + +static struct resource migor_ceu_resources[] = { + [0] = { + .name = "CEU", + .start = 0xfe910000, + .end = 0xfe91009f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 52, + .flags = IORESOURCE_IRQ, + }, + [2] = { + /* place holder for contiguous memory */ + }, +}; + +static struct platform_device migor_ceu_device = { + .name = "sh_mobile_ceu", + .num_resources = ARRAY_SIZE(migor_ceu_resources), + .resource = migor_ceu_resources, + .dev = { + .platform_data = &sh_mobile_ceu_info, + }, +}; + static struct platform_device *migor_devices[] __initdata = { &smc91x_eth_device, &sh_keysc_device, &migor_lcdc_device, + &migor_ceu_device, + &migor_camera_device, &migor_nor_flash_device, &migor_nand_flash_device, }; -static struct i2c_board_info __initdata migor_i2c_devices[] = { +static struct i2c_board_info migor_i2c_devices[] = { { I2C_BOARD_INFO("rs5c372b", 0x32), }, @@ -292,6 +448,9 @@ static int __init migor_devices_setup(void) { clk_always_enable("mstp214"); /* KEYSC */ clk_always_enable("mstp200"); /* LCDC */ + clk_always_enable("mstp203"); /* CEU */ + + platform_resource_setup_memory(&migor_ceu_device, "ceu", 4 << 20); i2c_register_board_info(0, migor_i2c_devices, ARRAY_SIZE(migor_i2c_devices)); @@ -344,6 +503,18 @@ static void __init migor_setup(char **cmdline_p) ctrl_outw(ctrl_inw(PORT_MSELCRB) | 0x0100, PORT_MSELCRB); ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x01e0, PORT_HIZCRA); #endif + + /* CEU */ + ctrl_outw((ctrl_inw(PORT_PTCR) & ~0x03c3) | 0x0051, PORT_PTCR); + ctrl_outw(ctrl_inw(PORT_PUCR) & ~0x03ff, PORT_PUCR); + ctrl_outw(ctrl_inw(PORT_PVCR) & ~0x03ff, PORT_PVCR); + ctrl_outw(ctrl_inw(PORT_PWCR) & ~0x3c00, PORT_PWCR); + ctrl_outw(ctrl_inw(PORT_PSELC) | 0x0001, PORT_PSELC); + ctrl_outw(ctrl_inw(PORT_PSELD) & ~0x2000, PORT_PSELD); + ctrl_outw(ctrl_inw(PORT_PSELE) | 0x000f, PORT_PSELE); + ctrl_outw(ctrl_inw(PORT_MSELCRB) | 0x2200, PORT_MSELCRB); + ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x0a00, PORT_HIZCRA); + ctrl_outw(ctrl_inw(PORT_HIZCRB) & ~0x0003, PORT_HIZCRB); } static struct sh_machine_vector mv_migor __initmv = { diff --git a/include/asm-sh/migor.h b/include/asm-sh/migor.h index e9f8e9b15f4..10016e0f4a4 100644 --- a/include/asm-sh/migor.h +++ b/include/asm-sh/migor.h @@ -25,12 +25,16 @@ #define PORT_PLCR 0xa4050114 #define PORT_PMCR 0xa4050116 #define PORT_PRCR 0xa405011c +#define PORT_PTCR 0xa4050140 +#define PORT_PUCR 0xa4050142 +#define PORT_PVCR 0xa4050144 #define PORT_PWCR 0xa4050146 #define PORT_PXCR 0xa4050148 #define PORT_PYCR 0xa405014a #define PORT_PZCR 0xa405014c #define PORT_PADR 0xa4050120 #define PORT_PHDR 0xa405012e +#define PORT_PTDR 0xa4050160 #define PORT_PWDR 0xa4050166 #define PORT_HIZCRA 0xa4050158 @@ -45,6 +49,7 @@ #define PORT_PSELB 0xa4050150 #define PORT_PSELC 0xa4050152 #define PORT_PSELD 0xa4050154 +#define PORT_PSELE 0xa4050156 #define PORT_HIZCRA 0xa4050158 #define PORT_HIZCRB 0xa405015a -- cgit v1.2.3 From 6968980a1bc0ba56dd8ef21c14577af3f2f9992b Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Mon, 28 Jul 2008 19:07:04 +0900 Subject: sh: SuperH Mobile LCDC platform data for AP325RXA Add LCD panel platform data for the AP325RXA board. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/boards/renesas/ap325rxa/setup.c | 81 ++++++++++++++++++++++++++++++++- 1 file changed, 80 insertions(+), 1 deletion(-) diff --git a/arch/sh/boards/renesas/ap325rxa/setup.c b/arch/sh/boards/renesas/ap325rxa/setup.c index 333b15cd795..db4e37d9c5b 100644 --- a/arch/sh/boards/renesas/ap325rxa/setup.c +++ b/arch/sh/boards/renesas/ap325rxa/setup.c @@ -16,7 +16,10 @@ #include #include #include +#include +#include #include +#include static struct resource smc9118_resources[] = { [0] = { @@ -79,9 +82,77 @@ static struct platform_device ap325rxa_nor_flash_device = { }, }; +#define FPGA_LCDREG 0xB4100180 +#define FPGA_BKLREG 0xB4100212 +#define FPGA_LCDREG_VAL 0x0018 +#define PORT_PHCR 0xA405010E +#define PORT_PLCR 0xA4050114 +#define PORT_PMCR 0xA4050116 +#define PORT_PRCR 0xA405011C +#define PORT_HIZCRA 0xA4050158 +#define PORT_PSCR 0xA405011E +#define PORT_PSDR 0xA405013E + +static void ap320_wvga_power_on(void *board_data) +{ + msleep(100); + + /* ASD AP-320/325 LCD ON */ + ctrl_outw(FPGA_LCDREG_VAL, FPGA_LCDREG); + + /* backlight */ + ctrl_outw((ctrl_inw(PORT_PSCR) & ~0x00C0) | 0x40, PORT_PSCR); + ctrl_outb(ctrl_inb(PORT_PSDR) & ~0x08, PORT_PSDR); + ctrl_outw(0x100, FPGA_BKLREG); +} + +static struct sh_mobile_lcdc_info lcdc_info = { + .clock_source = LCDC_CLK_EXTERNAL, + .ch[0] = { + .chan = LCDC_CHAN_MAINLCD, + .bpp = 16, + .interface_type = RGB18, + .clock_divider = 1, + .lcd_cfg = { + .name = "LB070WV1", + .xres = 800, + .yres = 480, + .left_margin = 40, + .right_margin = 160, + .hsync_len = 8, + .upper_margin = 63, + .lower_margin = 80, + .vsync_len = 1, + .sync = 0, /* hsync and vsync are active low */ + }, + .board_cfg = { + .display_on = ap320_wvga_power_on, + }, + } +}; + +static struct resource lcdc_resources[] = { + [0] = { + .name = "LCDC", + .start = 0xfe940000, /* P4-only space */ + .end = 0xfe941fff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device lcdc_device = { + .name = "sh_mobile_lcdc_fb", + .num_resources = ARRAY_SIZE(lcdc_resources), + .resource = lcdc_resources, + .dev = { + .platform_data = &lcdc_info, + }, +}; + static struct platform_device *ap325rxa_devices[] __initdata = { &smc9118_device, - &ap325rxa_nor_flash_device + &ap325rxa_nor_flash_device, + &lcdc_device, }; static struct i2c_board_info __initdata ap325rxa_i2c_devices[] = { @@ -89,6 +160,8 @@ static struct i2c_board_info __initdata ap325rxa_i2c_devices[] = { static int __init ap325rxa_devices_setup(void) { + clk_always_enable("mstp200"); /* LCDC */ + i2c_register_board_info(0, ap325rxa_i2c_devices, ARRAY_SIZE(ap325rxa_i2c_devices)); @@ -99,6 +172,12 @@ device_initcall(ap325rxa_devices_setup); static void __init ap325rxa_setup(char **cmdline_p) { + /* LCDC configuration */ + ctrl_outw(ctrl_inw(PORT_PHCR) & ~0xffff, PORT_PHCR); + ctrl_outw(ctrl_inw(PORT_PLCR) & ~0xffff, PORT_PLCR); + ctrl_outw(ctrl_inw(PORT_PMCR) & ~0xffff, PORT_PMCR); + ctrl_outw(ctrl_inw(PORT_PRCR) & ~0x03ff, PORT_PRCR); + ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x01C0, PORT_HIZCRA); } static struct sh_machine_vector mv_ap325rxa __initmv = { -- cgit v1.2.3 From 4875ea224af0215635f18c2c1b060fb023c7602f Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Mon, 28 Jul 2008 19:11:07 +0900 Subject: sh: Update smc911x platform data for AP325RXA Pass board specific smc911x parameters using struct smc911x_platdata. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/boards/renesas/ap325rxa/setup.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/sh/boards/renesas/ap325rxa/setup.c b/arch/sh/boards/renesas/ap325rxa/setup.c index db4e37d9c5b..f8b7859bbdc 100644 --- a/arch/sh/boards/renesas/ap325rxa/setup.c +++ b/arch/sh/boards/renesas/ap325rxa/setup.c @@ -12,15 +12,22 @@ #include #include +#include #include #include #include #include #include +#include #include #include #include +static struct smc911x_platdata smc911x_info = { + .flags = SMC911X_USE_32BIT, + .irq_flags = IRQF_TRIGGER_LOW, +}; + static struct resource smc9118_resources[] = { [0] = { .start = 0xb6080000, @@ -39,6 +46,9 @@ static struct platform_device smc9118_device = { .id = -1, .num_resources = ARRAY_SIZE(smc9118_resources), .resource = smc9118_resources, + .dev = { + .platform_data = &smc911x_info, + }, }; static struct mtd_partition ap325rxa_nor_flash_partitions[] = { -- cgit v1.2.3 From 8b2224dc6a5b46cfa1d54ab1fe82107351c66443 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Mon, 28 Jul 2008 19:14:35 +0900 Subject: sh: SuperH Mobile CEU and camera platform data for AP325RXA Add AP325RXA specific platform data for on-chip sh7723 CEU and ncm03j camera. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/boards/renesas/ap325rxa/setup.c | 119 +++++++++++++++++++++++++++++++- 1 file changed, 118 insertions(+), 1 deletion(-) diff --git a/arch/sh/boards/renesas/ap325rxa/setup.c b/arch/sh/boards/renesas/ap325rxa/setup.c index f8b7859bbdc..7fa74462bd9 100644 --- a/arch/sh/boards/renesas/ap325rxa/setup.c +++ b/arch/sh/boards/renesas/ap325rxa/setup.c @@ -19,6 +19,8 @@ #include #include #include +#include +#include #include #include #include @@ -99,9 +101,13 @@ static struct platform_device ap325rxa_nor_flash_device = { #define PORT_PLCR 0xA4050114 #define PORT_PMCR 0xA4050116 #define PORT_PRCR 0xA405011C -#define PORT_HIZCRA 0xA4050158 #define PORT_PSCR 0xA405011E +#define PORT_PZCR 0xA405014C +#define PORT_HIZCRA 0xA4050158 +#define PORT_MSELCRB 0xA4050182 #define PORT_PSDR 0xA405013E +#define PORT_PZDR 0xA405016C +#define PORT_PSELD 0xA4050154 static void ap320_wvga_power_on(void *board_data) { @@ -159,10 +165,112 @@ static struct platform_device lcdc_device = { }, }; +static unsigned char camera_ncm03j_magic[] = +{ + 0x87, 0x00, 0x88, 0x08, 0x89, 0x01, 0x8A, 0xE8, + 0x1D, 0x00, 0x1E, 0x8A, 0x21, 0x00, 0x33, 0x36, + 0x36, 0x60, 0x37, 0x08, 0x3B, 0x31, 0x44, 0x0F, + 0x46, 0xF0, 0x4B, 0x28, 0x4C, 0x21, 0x4D, 0x55, + 0x4E, 0x1B, 0x4F, 0xC7, 0x50, 0xFC, 0x51, 0x12, + 0x58, 0x02, 0x66, 0xC0, 0x67, 0x46, 0x6B, 0xA0, + 0x6C, 0x34, 0x7E, 0x25, 0x7F, 0x25, 0x8D, 0x0F, + 0x92, 0x40, 0x93, 0x04, 0x94, 0x26, 0x95, 0x0A, + 0x99, 0x03, 0x9A, 0xF0, 0x9B, 0x14, 0x9D, 0x7A, + 0xC5, 0x02, 0xD6, 0x07, 0x59, 0x00, 0x5A, 0x1A, + 0x5B, 0x2A, 0x5C, 0x37, 0x5D, 0x42, 0x5E, 0x56, + 0xC8, 0x00, 0xC9, 0x1A, 0xCA, 0x2A, 0xCB, 0x37, + 0xCC, 0x42, 0xCD, 0x56, 0xCE, 0x00, 0xCF, 0x1A, + 0xD0, 0x2A, 0xD1, 0x37, 0xD2, 0x42, 0xD3, 0x56, + 0x5F, 0x68, 0x60, 0x87, 0x61, 0xA3, 0x62, 0xBC, + 0x63, 0xD4, 0x64, 0xEA, 0xD6, 0x0F, +}; + +static int camera_set_capture(struct soc_camera_platform_info *info, + int enable) +{ + struct i2c_adapter *a = i2c_get_adapter(0); + struct i2c_msg msg; + int ret = 0; + int i; + + if (!enable) + return 0; /* no disable for now */ + + for (i = 0; i < ARRAY_SIZE(camera_ncm03j_magic); i += 2) { + u_int8_t buf[8]; + + msg.addr = 0x6e; + msg.buf = buf; + msg.len = 2; + msg.flags = 0; + + buf[0] = camera_ncm03j_magic[i]; + buf[1] = camera_ncm03j_magic[i + 1]; + + ret = (ret < 0) ? ret : i2c_transfer(a, &msg, 1); + } + + return ret; +} + +static struct soc_camera_platform_info camera_info = { + .iface = 0, + .format_name = "UYVY", + .format_depth = 16, + .format = { + .pixelformat = V4L2_PIX_FMT_UYVY, + .colorspace = V4L2_COLORSPACE_SMPTE170M, + .width = 640, + .height = 480, + }, + .bus_param = SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH | + SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_DATAWIDTH_8, + .set_capture = camera_set_capture, +}; + +static struct platform_device camera_device = { + .name = "soc_camera_platform", + .dev = { + .platform_data = &camera_info, + }, +}; + +static struct sh_mobile_ceu_info sh_mobile_ceu_info = { + .flags = SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH | + SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_DATAWIDTH_8, +}; + +static struct resource ceu_resources[] = { + [0] = { + .name = "CEU", + .start = 0xfe910000, + .end = 0xfe91009f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 52, + .flags = IORESOURCE_IRQ, + }, + [2] = { + /* place holder for contiguous memory */ + }, +}; + +static struct platform_device ceu_device = { + .name = "sh_mobile_ceu", + .num_resources = ARRAY_SIZE(ceu_resources), + .resource = ceu_resources, + .dev = { + .platform_data = &sh_mobile_ceu_info, + }, +}; + static struct platform_device *ap325rxa_devices[] __initdata = { &smc9118_device, &ap325rxa_nor_flash_device, &lcdc_device, + &ceu_device, + &camera_device, }; static struct i2c_board_info __initdata ap325rxa_i2c_devices[] = { @@ -171,6 +279,9 @@ static struct i2c_board_info __initdata ap325rxa_i2c_devices[] = { static int __init ap325rxa_devices_setup(void) { clk_always_enable("mstp200"); /* LCDC */ + clk_always_enable("mstp203"); /* CEU */ + + platform_resource_setup_memory(&ceu_device, "ceu", 4 << 20); i2c_register_board_info(0, ap325rxa_i2c_devices, ARRAY_SIZE(ap325rxa_i2c_devices)); @@ -188,6 +299,12 @@ static void __init ap325rxa_setup(char **cmdline_p) ctrl_outw(ctrl_inw(PORT_PMCR) & ~0xffff, PORT_PMCR); ctrl_outw(ctrl_inw(PORT_PRCR) & ~0x03ff, PORT_PRCR); ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x01C0, PORT_HIZCRA); + + /* CEU */ + ctrl_outw(ctrl_inw(PORT_MSELCRB) & ~0x0001, PORT_MSELCRB); + ctrl_outw(ctrl_inw(PORT_PSELD) & ~0x0003, PORT_PSELD); + ctrl_outw((ctrl_inw(PORT_PZCR) & ~0xff00) | 0x5500, PORT_PZCR); + ctrl_outb((ctrl_inb(PORT_PZDR) & ~0xf0) | 0x20, PORT_PZDR); } static struct sh_machine_vector mv_ap325rxa __initmv = { -- cgit v1.2.3