From b2aaee33fbb354a2f08121aa1c1be55841102761 Mon Sep 17 00:00:00 2001 From: Markus Lidel Date: Thu, 23 Jun 2005 22:02:19 -0700 Subject: [PATCH] I2O: Adaptec specific SG_IO access, firmware access through sysfs and 2400A workaround Changes: - Provide SG_IO access to BLOCK and EXECUTIVE class on Adaptec controllers - Use PRIVATE messages in SCSI-OSM because on some controllers normal SCSI class commands like READ or READ CAPACITY cause errors - Use new DMA and SG list creation function - Added workaround to limit sectors per request for Adaptec 2400A controllers Signed-off-by: Markus Lidel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/message/i2o/Kconfig | 18 +++ drivers/message/i2o/i2o_block.h | 6 + drivers/message/i2o/i2o_config.c | 4 + drivers/message/i2o/i2o_scsi.c | 263 +++++++++++++++++++++++---------------- drivers/message/i2o/pci.c | 22 ++++ include/linux/i2o-dev.h | 22 ++++ include/linux/i2o.h | 37 ++++-- include/scsi/sg_request.h | 26 ++++ 8 files changed, 282 insertions(+), 116 deletions(-) create mode 100644 include/scsi/sg_request.h diff --git a/drivers/message/i2o/Kconfig b/drivers/message/i2o/Kconfig index ce278e060ac..94b6d676c5c 100644 --- a/drivers/message/i2o/Kconfig +++ b/drivers/message/i2o/Kconfig @@ -24,6 +24,24 @@ config I2O If unsure, say N. +config I2O_EXT_ADAPTEC + bool "Enable Adaptec extensions" + depends on I2O + default y + ---help--- + Say Y for support of raidutils for Adaptec I2O controllers. You also + have to say Y to "I2O Configuration support", "I2O SCSI OSM" below + and to "SCSI generic support" under "SCSI device configuration". + +config I2O_EXT_ADAPTEC_DMA64 + bool "Enable 64-bit DMA" + depends on I2O_EXT_ADAPTEC && ( 64BIT || HIGHMEM64G ) + default y + ---help--- + Say Y for support of 64-bit DMA transfer mode on Adaptec I2O + controllers. + Note: You need at least firmware version 3709. + config I2O_CONFIG tristate "I2O Configuration support" depends on PCI && I2O diff --git a/drivers/message/i2o/i2o_block.h b/drivers/message/i2o/i2o_block.h index 9e1a95fb083..e45cc40ce38 100644 --- a/drivers/message/i2o/i2o_block.h +++ b/drivers/message/i2o/i2o_block.h @@ -56,6 +56,12 @@ #define I2O_BLOCK_RETRY_TIME HZ/4 #define I2O_BLOCK_MAX_OPEN_REQUESTS 50 +/* request queue sizes */ +#define I2O_BLOCK_REQ_MEMPOOL_SIZE 32 + +#define KERNEL_SECTOR_SHIFT 9 +#define KERNEL_SECTOR_SIZE (1 << KERNEL_SECTOR_SHIFT) + /* I2O Block OSM mempool struct */ struct i2o_block_mempool { kmem_cache_t *slab; diff --git a/drivers/message/i2o/i2o_config.c b/drivers/message/i2o/i2o_config.c index 849d90aad77..7636833b462 100644 --- a/drivers/message/i2o/i2o_config.c +++ b/drivers/message/i2o/i2o_config.c @@ -515,6 +515,7 @@ static int i2o_cfg_evt_get(unsigned long arg, struct file *fp) return 0; } +#ifdef CONFIG_I2O_EXT_ADAPTEC #ifdef CONFIG_COMPAT static int i2o_cfg_passthru32(struct file *file, unsigned cmnd, unsigned long arg) { @@ -964,6 +965,7 @@ static int i2o_cfg_passthru(unsigned long arg) kfree(reply); return rcode; } +#endif /* * IOCTL Handler @@ -1018,9 +1020,11 @@ static int i2o_cfg_ioctl(struct inode *inode, struct file *fp, unsigned int cmd, ret = i2o_cfg_evt_get(arg, fp); break; +#ifdef CONFIG_I2O_EXT_ADAPTEC case I2OPASSTHRU: ret = i2o_cfg_passthru(arg); break; +#endif default: osm_debug("unknown ioctl called!\n"); diff --git a/drivers/message/i2o/i2o_scsi.c b/drivers/message/i2o/i2o_scsi.c index c3b0c29ac02..fef53b509a6 100644 --- a/drivers/message/i2o/i2o_scsi.c +++ b/drivers/message/i2o/i2o_scsi.c @@ -55,6 +55,7 @@ #include #include #include +#include #include #include @@ -65,19 +66,23 @@ #include #include #include +#include +#include +#include #define OSM_NAME "scsi-osm" -#define OSM_VERSION "$Rev$" +#define OSM_VERSION "1.282" #define OSM_DESCRIPTION "I2O SCSI Peripheral OSM" static struct i2o_driver i2o_scsi_driver; -static int i2o_scsi_max_id = 16; -static int i2o_scsi_max_lun = 8; +static unsigned int i2o_scsi_max_id = 16; +static unsigned int i2o_scsi_max_lun = 255; struct i2o_scsi_host { struct Scsi_Host *scsi_host; /* pointer to the SCSI host */ struct i2o_controller *iop; /* pointer to the I2O controller */ + unsigned int lun; /* lun's used for block devices */ struct i2o_device *channel[0]; /* channel->i2o_dev mapping table */ }; @@ -100,12 +105,17 @@ static struct i2o_scsi_host *i2o_scsi_host_alloc(struct i2o_controller *c) u8 type; int i; size_t size; - i2o_status_block *sb; + u16 body_size = 6; + +#ifdef CONFIG_I2O_EXT_ADAPTEC + if (c->adaptec) + body_size = 8; +#endif list_for_each_entry(i2o_dev, &c->devices, list) if (i2o_dev->lct_data.class_id == I2O_CLASS_BUS_ADAPTER) { if (i2o_parm_field_get(i2o_dev, 0x0000, 0, &type, 1) - && (type == 0x01)) /* SCSI bus */ + && (type == 0x01)) /* SCSI bus */ max_channel++; } @@ -127,20 +137,18 @@ static struct i2o_scsi_host *i2o_scsi_host_alloc(struct i2o_controller *c) scsi_host->max_id = i2o_scsi_max_id; scsi_host->max_lun = i2o_scsi_max_lun; scsi_host->this_id = c->unit; - - sb = c->status_block.virt; - - scsi_host->sg_tablesize = (sb->inbound_frame_size - - sizeof(struct i2o_message) / 4 - 6) / 2; + scsi_host->sg_tablesize = i2o_sg_tablesize(c, body_size); i2o_shost = (struct i2o_scsi_host *)scsi_host->hostdata; i2o_shost->scsi_host = scsi_host; i2o_shost->iop = c; + i2o_shost->lun = 1; i = 0; list_for_each_entry(i2o_dev, &c->devices, list) if (i2o_dev->lct_data.class_id == I2O_CLASS_BUS_ADAPTER) { - if (i2o_parm_field_get(i2o_dev, 0x0000, 0, &type, 1) || (type == 1)) /* only SCSI bus */ + if (i2o_parm_field_get(i2o_dev, 0x0000, 0, &type, 1) + && (type == 0x01)) /* only SCSI bus */ i2o_shost->channel[i++] = i2o_dev; if (i >= max_channel) @@ -212,8 +220,8 @@ static int i2o_scsi_probe(struct device *dev) struct Scsi_Host *scsi_host; struct i2o_device *parent; struct scsi_device *scsi_dev; - u32 id; - u64 lun; + u32 id = -1; + u64 lun = -1; int channel = -1; int i; @@ -223,8 +231,56 @@ static int i2o_scsi_probe(struct device *dev) scsi_host = i2o_shost->scsi_host; - if (i2o_parm_field_get(i2o_dev, 0, 3, &id, 4) < 0) + switch (i2o_dev->lct_data.class_id) { + case I2O_CLASS_RANDOM_BLOCK_STORAGE: + case I2O_CLASS_EXECUTIVE: +#ifdef CONFIG_I2O_EXT_ADAPTEC + if (c->adaptec) { + u8 type; + struct i2o_device *d = i2o_shost->channel[0]; + + if (i2o_parm_field_get(d, 0x0000, 0, &type, 1) + && (type == 0x01)) /* SCSI bus */ + if (i2o_parm_field_get(d, 0x0200, 4, &id, 4)) { + channel = 0; + if (i2o_dev->lct_data.class_id == + I2O_CLASS_RANDOM_BLOCK_STORAGE) + lun = i2o_shost->lun++; + else + lun = 0; + } + } +#endif + break; + + case I2O_CLASS_SCSI_PERIPHERAL: + if (i2o_parm_field_get(i2o_dev, 0x0000, 3, &id, 4) < 0) + return -EFAULT; + + if (i2o_parm_field_get(i2o_dev, 0x0000, 4, &lun, 8) < 0) + return -EFAULT; + + parent = i2o_iop_find_device(c, i2o_dev->lct_data.parent_tid); + if (!parent) { + osm_warn("can not find parent of device %03x\n", + i2o_dev->lct_data.tid); + return -EFAULT; + } + + for (i = 0; i <= i2o_shost->scsi_host->max_channel; i++) + if (i2o_shost->channel[i] == parent) + channel = i; + break; + + default: + return -EFAULT; + } + + if (channel == -1) { + osm_warn("can not find channel of device %03x\n", + i2o_dev->lct_data.tid); return -EFAULT; + } if (id >= scsi_host->max_id) { osm_warn("SCSI device id (%d) >= max_id of I2O host (%d)", id, @@ -232,31 +288,12 @@ static int i2o_scsi_probe(struct device *dev) return -EFAULT; } - if (i2o_parm_field_get(i2o_dev, 0, 4, &lun, 8) < 0) - return -EFAULT; if (lun >= scsi_host->max_lun) { osm_warn("SCSI device id (%d) >= max_lun of I2O host (%d)", (unsigned int)lun, scsi_host->max_lun); return -EFAULT; } - parent = i2o_iop_find_device(c, i2o_dev->lct_data.parent_tid); - if (!parent) { - osm_warn("can not find parent of device %03x\n", - i2o_dev->lct_data.tid); - return -EFAULT; - } - - for (i = 0; i <= i2o_shost->scsi_host->max_channel; i++) - if (i2o_shost->channel[i] == parent) - channel = i; - - if (channel == -1) { - osm_warn("can not find channel of device %03x\n", - i2o_dev->lct_data.tid); - return -EFAULT; - } - scsi_dev = __scsi_add_device(i2o_shost->scsi_host, channel, id, lun, i2o_dev); @@ -266,7 +303,8 @@ static int i2o_scsi_probe(struct device *dev) return PTR_ERR(scsi_dev); } - sysfs_create_link(&i2o_dev->device.kobj, &scsi_dev->sdev_gendev.kobj, "scsi"); + sysfs_create_link(&i2o_dev->device.kobj, &scsi_dev->sdev_gendev.kobj, + "scsi"); osm_info("device added (TID: %03x) channel: %d, id: %d, lun: %d\n", i2o_dev->lct_data.tid, channel, id, (unsigned int)lun); @@ -542,9 +580,7 @@ static int i2o_scsi_queuecommand(struct scsi_cmnd *SCpnt, void (*done) (struct scsi_cmnd *)) { struct i2o_controller *c; - struct Scsi_Host *host; struct i2o_device *i2o_dev; - struct device *dev; int tid; struct i2o_message __iomem *msg; u32 m; @@ -554,20 +590,16 @@ static int i2o_scsi_queuecommand(struct scsi_cmnd *SCpnt, * RETURN_SENSE_DATA_IN_REPLY_MESSAGE_FRAME */ u32 scsi_flags = 0x20a00000; - u32 sg_flags; + u32 sgl_offset; u32 __iomem *mptr; - u32 __iomem *lenptr; - u32 len; - int i; + u32 cmd = I2O_CMD_SCSI_EXEC << 24; + int rc = 0; /* * Do the incoming paperwork */ - i2o_dev = SCpnt->device->hostdata; - host = SCpnt->device->host; c = i2o_dev->iop; - dev = &c->pdev->dev; SCpnt->scsi_done = done; @@ -575,7 +607,7 @@ static int i2o_scsi_queuecommand(struct scsi_cmnd *SCpnt, osm_warn("no I2O device in request\n"); SCpnt->result = DID_NO_CONNECT << 16; done(SCpnt); - return 0; + goto exit; } tid = i2o_dev->lct_data.tid; @@ -583,47 +615,86 @@ static int i2o_scsi_queuecommand(struct scsi_cmnd *SCpnt, osm_debug("qcmd: Tid = %03x\n", tid); osm_debug("Real scsi messages.\n"); - /* - * Obtain an I2O message. If there are none free then - * throw it back to the scsi layer - */ - - m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET); - if (m == I2O_QUEUE_EMPTY) - return SCSI_MLQUEUE_HOST_BUSY; - - mptr = &msg->body[0]; - /* * Put together a scsi execscb message */ - switch (SCpnt->sc_data_direction) { case PCI_DMA_NONE: /* DATA NO XFER */ - sg_flags = 0x00000000; + sgl_offset = SGL_OFFSET_0; break; case PCI_DMA_TODEVICE: /* DATA OUT (iop-->dev) */ scsi_flags |= 0x80000000; - sg_flags = 0x14000000; + sgl_offset = SGL_OFFSET_10; break; case PCI_DMA_FROMDEVICE: /* DATA IN (iop<--dev) */ scsi_flags |= 0x40000000; - sg_flags = 0x10000000; + sgl_offset = SGL_OFFSET_10; break; default: /* Unknown - kill the command */ SCpnt->result = DID_NO_CONNECT << 16; done(SCpnt); - return 0; + goto exit; } - writel(I2O_CMD_SCSI_EXEC << 24 | HOST_TID << 12 | tid, &msg->u.head[1]); + /* + * Obtain an I2O message. If there are none free then + * throw it back to the scsi layer + */ + + m = i2o_msg_get_wait(c, &msg, I2O_TIMEOUT_MESSAGE_GET); + if (m == I2O_QUEUE_EMPTY) { + rc = SCSI_MLQUEUE_HOST_BUSY; + goto exit; + } + + mptr = &msg->body[0]; + +#ifdef CONFIG_I2O_EXT_ADAPTEC + if (c->adaptec) { + u32 adpt_flags = 0; + + if (SCpnt->sc_request && SCpnt->sc_request->upper_private_data) { + i2o_sg_io_hdr_t __user *usr_ptr = + ((Sg_request *) (SCpnt->sc_request-> + upper_private_data))->header. + usr_ptr; + + if (usr_ptr) + get_user(adpt_flags, &usr_ptr->flags); + } + + switch (i2o_dev->lct_data.class_id) { + case I2O_CLASS_EXECUTIVE: + case I2O_CLASS_RANDOM_BLOCK_STORAGE: + /* interpret flag has to be set for executive */ + adpt_flags ^= I2O_DPT_SG_FLAG_INTERPRET; + break; + + default: + break; + } + + /* + * for Adaptec controllers we use the PRIVATE command, because + * the normal SCSI EXEC doesn't support all SCSI commands on + * all controllers (for example READ CAPACITY). + */ + if (sgl_offset == SGL_OFFSET_10) + sgl_offset = SGL_OFFSET_12; + cmd = I2O_CMD_PRIVATE << 24; + writel(I2O_VENDOR_DPT << 16 | I2O_CMD_SCSI_EXEC, mptr++); + writel(adpt_flags | tid, mptr++); + } +#endif + + writel(cmd | HOST_TID << 12 | tid, &msg->u.head[1]); writel(i2o_scsi_driver.context, &msg->u.s.icntxt); /* We want the SCSI control block back */ @@ -655,55 +726,30 @@ static int i2o_scsi_queuecommand(struct scsi_cmnd *SCpnt, /* Write SCSI command into the message - always 16 byte block */ memcpy_toio(mptr, SCpnt->cmnd, 16); mptr += 4; - lenptr = mptr++; /* Remember me - fill in when we know */ - - /* Now fill in the SGList and command */ - if (SCpnt->use_sg) { - struct scatterlist *sg; - int sg_count; - - sg = SCpnt->request_buffer; - len = 0; - sg_count = dma_map_sg(dev, sg, SCpnt->use_sg, - SCpnt->sc_data_direction); - - if (unlikely(sg_count <= 0)) - return -ENOMEM; - - for (i = SCpnt->use_sg; i > 0; i--) { - if (i == 1) - sg_flags |= 0xC0000000; - writel(sg_flags | sg_dma_len(sg), mptr++); - writel(sg_dma_address(sg), mptr++); - len += sg_dma_len(sg); - sg++; - } - - writel(len, lenptr); - } else { - len = SCpnt->request_bufflen; - - writel(len, lenptr); - - if (len > 0) { - dma_addr_t dma_addr; - - dma_addr = dma_map_single(dev, SCpnt->request_buffer, - SCpnt->request_bufflen, - SCpnt->sc_data_direction); - if (!dma_addr) - return -ENOMEM; - - SCpnt->SCp.ptr = (void *)(unsigned long)dma_addr; - sg_flags |= 0xC0000000; - writel(sg_flags | SCpnt->request_bufflen, mptr++); - writel(dma_addr, mptr++); + if (sgl_offset != SGL_OFFSET_0) { + /* write size of data addressed by SGL */ + writel(SCpnt->request_bufflen, mptr++); + + /* Now fill in the SGList and command */ + if (SCpnt->use_sg) { + if (!i2o_dma_map_sg(c, SCpnt->request_buffer, + SCpnt->use_sg, + SCpnt->sc_data_direction, &mptr)) + goto nomem; + } else { + SCpnt->SCp.dma_handle = + i2o_dma_map_single(c, SCpnt->request_buffer, + SCpnt->request_bufflen, + SCpnt->sc_data_direction, &mptr); + if (dma_mapping_error(SCpnt->SCp.dma_handle)) + goto nomem; } } /* Stick the headers on */ - writel((mptr - &msg->u.head[0]) << 16 | SGL_OFFSET_10, &msg->u.head[0]); + writel(I2O_MESSAGE_SIZE(mptr - &msg->u.head[0]) | sgl_offset, + &msg->u.head[0]); /* Queue the message */ i2o_msg_post(c, m); @@ -711,6 +757,13 @@ static int i2o_scsi_queuecommand(struct scsi_cmnd *SCpnt, osm_debug("Issued %ld\n", SCpnt->serial_number); return 0; + + nomem: + rc = -ENOMEM; + i2o_msg_nop(c, m); + + exit: + return rc; }; /** diff --git a/drivers/message/i2o/pci.c b/drivers/message/i2o/pci.c index a499af096a6..964fe481849 100644 --- a/drivers/message/i2o/pci.c +++ b/drivers/message/i2o/pci.c @@ -362,11 +362,33 @@ static int __devinit i2o_pci_probe(struct pci_dev *pdev, c->promise = 1; } + if (pdev->subsystem_vendor == PCI_VENDOR_ID_DPT) + c->adaptec = 1; + /* Cards that go bananas if you quiesce them before you reset them. */ if (pdev->vendor == PCI_VENDOR_ID_DPT) { c->no_quiesce = 1; if (pdev->device == 0xa511) c->raptor = 1; + + if (pdev->subsystem_device == 0xc05a) { + c->limit_sectors = 1; + printk(KERN_INFO + "%s: limit sectors per request to %d\n", c->name, + I2O_MAX_SECTORS_LIMITED); + } +#ifdef CONFIG_I2O_EXT_ADAPTEC_DMA64 + if (sizeof(dma_addr_t) > 4) { + if (pci_set_dma_mask(pdev, DMA_64BIT_MASK)) + printk(KERN_INFO "%s: 64-bit DMA unavailable\n", + c->name); + else { + c->pae_support = 1; + printk(KERN_INFO "%s: using 64-bit DMA\n", + c->name); + } + } +#endif } if ((rc = i2o_pci_alloc(c))) { diff --git a/include/linux/i2o-dev.h b/include/linux/i2o-dev.h index 90c984ecd52..d4a08d29e36 100644 --- a/include/linux/i2o-dev.h +++ b/include/linux/i2o-dev.h @@ -32,6 +32,13 @@ typedef unsigned int u32; #endif /* __KERNEL__ */ +/* + * Software module types + */ +#define I2O_SOFTWARE_MODULE_IRTOS 0x11 +#define I2O_SOFTWARE_MODULE_IOP_PRIVATE 0x22 +#define I2O_SOFTWARE_MODULE_IOP_CONFIG 0x23 + /* * Vendors */ @@ -125,6 +132,10 @@ struct i2o_evt_get { int lost; }; +typedef struct i2o_sg_io_hdr { + unsigned int flags; /* see I2O_DPT_SG_IO_FLAGS */ +} i2o_sg_io_hdr_t; + /************************************************************************** * HRT related constants and structures **************************************************************************/ @@ -403,4 +414,15 @@ typedef struct _i2o_status_block { #define ADAPTER_STATE_FAILED 0x10 #define ADAPTER_STATE_FAULTED 0x11 + +/* + * DPT / Adaptec specific values for i2o_sg_io_hdr flags. + */ +#define I2O_DPT_SG_FLAG_INTERPRET 0x00010000 +#define I2O_DPT_SG_FLAG_PHYSICAL 0x00020000 + +#define I2O_DPT_FLASH_FRAG_SIZE 0x10000 +#define I2O_DPT_FLASH_READ 0x0101 +#define I2O_DPT_FLASH_WRITE 0x0102 + #endif /* _I2O_DEV_H */ diff --git a/include/linux/i2o.h b/include/linux/i2o.h index 497ea574f96..2039a87c2b9 100644 --- a/include/linux/i2o.h +++ b/include/linux/i2o.h @@ -147,10 +147,13 @@ struct i2o_controller { struct pci_dev *pdev; /* PCI device */ - unsigned int short_req:1; /* use small block sizes */ - unsigned int no_quiesce:1; /* dont quiesce before reset */ - unsigned int raptor:1; /* split bar */ unsigned int promise:1; /* Promise controller */ + unsigned int adaptec:1; /* DPT / Adaptec controller */ + unsigned int raptor:1; /* split bar */ + unsigned int no_quiesce:1; /* dont quiesce before reset */ + unsigned int short_req:1; /* use small block sizes */ + unsigned int limit_sectors:1; /* limit number of sectors / request */ + unsigned int pae_support:1; /* controller has 64-bit SGL support */ struct list_head devices; /* list of I2O devices */ struct list_head list; /* Controller list */ @@ -746,7 +749,21 @@ static inline struct i2o_message __iomem *i2o_msg_in_to_virt(struct i2o_controll static inline int i2o_dma_alloc(struct device *dev, struct i2o_dma *addr, size_t len, unsigned int gfp_mask) { + struct pci_dev *pdev = to_pci_dev(dev); + int dma_64 = 0; + + if ((sizeof(dma_addr_t) > 4) && (pdev->dma_mask == DMA_64BIT_MASK)) { + dma_64 = 1; + if(pci_set_dma_mask(pdev, DMA_32BIT_MASK)) + return -ENOMEM; + } + addr->virt = dma_alloc_coherent(dev, len, &addr->phys, gfp_mask); + + if ((sizeof(dma_addr_t) > 4) && dma_64) + if(pci_set_dma_mask(pdev, DMA_64BIT_MASK)) + printk(KERN_WARNING "i2o: unable to set 64-bit DMA"); + if (!addr->virt) return -ENOMEM; @@ -946,7 +963,7 @@ extern void i2o_debug_state(struct i2o_controller *c); #define I2O_CMD_BLOCK_MEJECT 0x43 #define I2O_CMD_BLOCK_POWER 0x70 -#define I2O_PRIVATE_MSG 0xFF +#define I2O_CMD_PRIVATE 0xFF /* Command status values */ @@ -1095,9 +1112,9 @@ extern void i2o_debug_state(struct i2o_controller *c); #define SGL_OFFSET_8 (0x0080 | I2OVERSION) #define SGL_OFFSET_9 (0x0090 | I2OVERSION) #define SGL_OFFSET_10 (0x00A0 | I2OVERSION) - -#define TRL_OFFSET_5 (0x0050 | I2OVERSION) -#define TRL_OFFSET_6 (0x0060 | I2OVERSION) +#define SGL_OFFSET_11 (0x00B0 | I2OVERSION) +#define SGL_OFFSET_12 (0x00C0 | I2OVERSION) +#define SGL_OFFSET(x) (((x)<<4) | I2OVERSION) /* Transaction Reply Lists (TRL) Control Word structure */ #define TRL_SINGLE_FIXED_LENGTH 0x00 @@ -1130,7 +1147,6 @@ extern void i2o_debug_state(struct i2o_controller *c); #define HOST_TID 1 #define MSG_FRAME_SIZE 128 /* i2o_scsi assumes >= 32 */ -#define REPLY_FRAME_SIZE 17 #define SG_TABLESIZE 30 #define NMBR_MSG_FRAMES 128 @@ -1155,11 +1171,10 @@ extern void i2o_debug_state(struct i2o_controller *c); #define I2O_HRT_GET_TRIES 3 #define I2O_LCT_GET_TRIES 3 -/* request queue sizes */ +/* defines for max_sectors and max_phys_segments */ #define I2O_MAX_SECTORS 1024 +#define I2O_MAX_SECTORS_LIMITED 256 #define I2O_MAX_PHYS_SEGMENTS MAX_PHYS_SEGMENTS -#define I2O_REQ_MEMPOOL_SIZE 32 - #endif /* __KERNEL__ */ #endif /* _I2O_H */ diff --git a/include/scsi/sg_request.h b/include/scsi/sg_request.h new file mode 100644 index 00000000000..57ff525bdd3 --- /dev/null +++ b/include/scsi/sg_request.h @@ -0,0 +1,26 @@ +typedef struct scsi_request Scsi_Request; + +static Scsi_Request *dummy_cmdp; /* only used for sizeof */ + +typedef struct sg_scatter_hold { /* holding area for scsi scatter gather info */ + unsigned short k_use_sg; /* Count of kernel scatter-gather pieces */ + unsigned short sglist_len; /* size of malloc'd scatter-gather list ++ */ + unsigned bufflen; /* Size of (aggregate) data buffer */ + unsigned b_malloc_len; /* actual len malloc'ed in buffer */ + void *buffer; /* Data buffer or scatter list (k_use_sg>0) */ + char dio_in_use; /* 0->indirect IO (or mmap), 1->dio */ + unsigned char cmd_opcode; /* first byte of command */ +} Sg_scatter_hold; + +typedef struct sg_request { /* SG_MAX_QUEUE requests outstanding per file */ + Scsi_Request *my_cmdp; /* != 0 when request with lower levels */ + struct sg_request *nextrp; /* NULL -> tail request (slist) */ + struct sg_fd *parentfp; /* NULL -> not in use */ + Sg_scatter_hold data; /* hold buffer, perhaps scatter list */ + sg_io_hdr_t header; /* scsi command+info, see */ + unsigned char sense_b[sizeof (dummy_cmdp->sr_sense_buffer)]; + char res_used; /* 1 -> using reserve buffer, 0 -> not ... */ + char orphan; /* 1 -> drop on sight, 0 -> normal */ + char sg_io_owned; /* 1 -> packet belongs to SG_IO */ + volatile char done; /* 0->before bh, 1->before read, 2->read */ +} Sg_request; -- cgit v1.2.3