From 5711fe900dfef8d9afdbbb6d0f9c9720919d1d66 Mon Sep 17 00:00:00 2001
From: Jeremy Kerr <jk@ozlabs.org>
Date: Fri, 4 Apr 2008 17:55:28 +1100
Subject: [POWERPC] cell: Fix lost interrupts due to fasteoi handler

We may currently lose interrupts during SPE context switch, as we alter
the INT_Route register. Because the IIC uses a per-thread priority
status, changing the interrupt routing to a different thread means that
the IRQ is no longer masked by the priority status, so we end up with
two fasteoi IRQ handlers executing for the one irq_desc. The fasteoi
handler doesn't handle multiple IRQs, so drops the second one.

Fix this by using our own flow handler. This is based on
handle_edge_irq, but issues an eoi after IRQs are handled, and doesn't
do any mask/unmasking.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
---
 arch/powerpc/platforms/cell/interrupt.c | 53 +++++++++++++++++++++++++++++++--
 1 file changed, 51 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/platforms/cell/interrupt.c b/arch/powerpc/platforms/cell/interrupt.c
index 04f74f9f9ab..5bf7df14602 100644
--- a/arch/powerpc/platforms/cell/interrupt.c
+++ b/arch/powerpc/platforms/cell/interrupt.c
@@ -35,6 +35,7 @@
 #include <linux/percpu.h>
 #include <linux/types.h>
 #include <linux/ioport.h>
+#include <linux/kernel_stat.h>
 
 #include <asm/io.h>
 #include <asm/pgtable.h>
@@ -231,6 +232,54 @@ static int iic_host_match(struct irq_host *h, struct device_node *node)
 				    "IBM,CBEA-Internal-Interrupt-Controller");
 }
 
+extern int noirqdebug;
+
+static void handle_iic_irq(unsigned int irq, struct irq_desc *desc)
+{
+	const unsigned int cpu = smp_processor_id();
+
+	spin_lock(&desc->lock);
+
+	desc->status &= ~(IRQ_REPLAY | IRQ_WAITING);
+
+	/*
+	 * If we're currently running this IRQ, or its disabled,
+	 * we shouldn't process the IRQ. Mark it pending, handle
+	 * the necessary masking and go out
+	 */
+	if (unlikely((desc->status & (IRQ_INPROGRESS | IRQ_DISABLED)) ||
+		    !desc->action)) {
+		desc->status |= IRQ_PENDING;
+		goto out_eoi;
+	}
+
+	kstat_cpu(cpu).irqs[irq]++;
+
+	/* Mark the IRQ currently in progress.*/
+	desc->status |= IRQ_INPROGRESS;
+
+	do {
+		struct irqaction *action = desc->action;
+		irqreturn_t action_ret;
+
+		if (unlikely(!action))
+			goto out_eoi;
+
+		desc->status &= ~IRQ_PENDING;
+		spin_unlock(&desc->lock);
+		action_ret = handle_IRQ_event(irq, action);
+		if (!noirqdebug)
+			note_interrupt(irq, desc, action_ret);
+		spin_lock(&desc->lock);
+
+	} while ((desc->status & (IRQ_PENDING | IRQ_DISABLED)) == IRQ_PENDING);
+
+	desc->status &= ~IRQ_INPROGRESS;
+out_eoi:
+	desc->chip->eoi(irq);
+	spin_unlock(&desc->lock);
+}
+
 static int iic_host_map(struct irq_host *h, unsigned int virq,
 			irq_hw_number_t hw)
 {
@@ -240,10 +289,10 @@ static int iic_host_map(struct irq_host *h, unsigned int virq,
 		break;
 	case IIC_IRQ_TYPE_IOEXC:
 		set_irq_chip_and_handler(virq, &iic_ioexc_chip,
-					 handle_fasteoi_irq);
+					 handle_iic_irq);
 		break;
 	default:
-		set_irq_chip_and_handler(virq, &iic_chip, handle_fasteoi_irq);
+		set_irq_chip_and_handler(virq, &iic_chip, handle_iic_irq);
 	}
 	return 0;
 }
-- 
cgit v1.2.3


From 943906ba4bebf629d5cd770e48b8ec0ddc433869 Mon Sep 17 00:00:00 2001
From: Jeremy Kerr <jk@ozlabs.org>
Date: Mon, 7 Apr 2008 17:42:36 +1000
Subject: [POWERPC] spufs: don't touch suspend bits when purging DMA queue

When we issue a MFC purge request, we may inadvertantly clear the
suspended status.

This change adds the MFC_CNTL_SUSPEND_MASK when we issue a purge
request, so that the suspend bit is masked out.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
---
 arch/powerpc/platforms/cell/spufs/switch.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/platforms/cell/spufs/switch.c b/arch/powerpc/platforms/cell/spufs/switch.c
index d2a1249d36d..65b423b6da4 100644
--- a/arch/powerpc/platforms/cell/spufs/switch.c
+++ b/arch/powerpc/platforms/cell/spufs/switch.c
@@ -462,7 +462,9 @@ static inline void purge_mfc_queue(struct spu_state *csa, struct spu *spu)
 	 * Restore, Step 14.
 	 *     Write MFC_CNTL[Pc]=1 (purge queue).
 	 */
-	out_be64(&priv2->mfc_control_RW, MFC_CNTL_PURGE_DMA_REQUEST);
+	out_be64(&priv2->mfc_control_RW,
+			MFC_CNTL_PURGE_DMA_REQUEST |
+			MFC_CNTL_SUSPEND_MASK);
 	eieio();
 }
 
-- 
cgit v1.2.3


From 1ca4264ee17745779c341966c5e61ac69bfd17a6 Mon Sep 17 00:00:00 2001
From: Jeremy Kerr <jk@ozlabs.org>
Date: Wed, 9 Apr 2008 15:24:22 +1000
Subject: [POWERPC] spufs: fix save of mfc_cntl register

Currently, we can introduce invalid entries into the MFC queues:

1) context starts a DMA

2) context gets scheduled out during a DMA
  - kernel saves MFC queue to CSA
  - kernel saves 0x0 in csa->mfc_control_RW

3) context gets scheduled in
  - csa->mfc_control[Q] ('queues empty') isn't set, so DMA queues are
    restored from the CSA

4) context's DMA is completed

5) context gets scheduled out again, no DMA occuring this time
  - kernel sees that MFC_CNTL[Q] ('queues empty') is set, so doesn't
    touch saved queue data in CSA
  - kernel saves 0x0 in csa->mfc_control_RW

6) context gets scheduled in
  - csa->mfc_control[Q] ('queues empty') isn't set (we saved is as 0!),
    so DMA queues are restored from the CSA

In this last restore, we've restored the queue status from step 2,
which are now invalid.

This change makes save_mfc_cntl() closer to the save/restore sequence,
as specified in the CBE handbook.

With changes from Luke Browning.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
---
 arch/powerpc/platforms/cell/spufs/switch.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/arch/powerpc/platforms/cell/spufs/switch.c b/arch/powerpc/platforms/cell/spufs/switch.c
index 65b423b6da4..4131784216b 100644
--- a/arch/powerpc/platforms/cell/spufs/switch.c
+++ b/arch/powerpc/platforms/cell/spufs/switch.c
@@ -186,20 +186,21 @@ static inline void save_mfc_cntl(struct spu_state *csa, struct spu *spu)
 				 MFC_CNTL_SUSPEND_COMPLETE);
 		/* fall through */
 	case MFC_CNTL_SUSPEND_COMPLETE:
-		if (csa) {
+		if (csa)
 			csa->priv2.mfc_control_RW =
-				MFC_CNTL_SUSPEND_MASK |
+				in_be64(&priv2->mfc_control_RW) |
 				MFC_CNTL_SUSPEND_DMA_QUEUE;
-		}
 		break;
 	case MFC_CNTL_NORMAL_DMA_QUEUE_OPERATION:
 		out_be64(&priv2->mfc_control_RW, MFC_CNTL_SUSPEND_DMA_QUEUE);
 		POLL_WHILE_FALSE((in_be64(&priv2->mfc_control_RW) &
 				  MFC_CNTL_SUSPEND_DMA_STATUS_MASK) ==
 				 MFC_CNTL_SUSPEND_COMPLETE);
-		if (csa) {
-			csa->priv2.mfc_control_RW = 0;
-		}
+		if (csa)
+			csa->priv2.mfc_control_RW =
+				in_be64(&priv2->mfc_control_RW) &
+				~MFC_CNTL_SUSPEND_DMA_QUEUE &
+				~MFC_CNTL_SUSPEND_MASK;
 		break;
 	}
 }
-- 
cgit v1.2.3


From 55d7cd74d44e7e0597f95db25c12f3e6c5e7916f Mon Sep 17 00:00:00 2001
From: Jeremy Kerr <jk@ozlabs.org>
Date: Thu, 24 Apr 2008 18:15:40 +1000
Subject: [POWERPC] spufs: fix post-stopped update of MFC_CNTL register

We currently have two issues with the MFC save code:

 * save_mfc_decr doesn't handle a transition of 1 -> 0 of the Ds bit
 * The Q bit may be stale in the CSA

This change fixes the first issue by clearing the relevant bits from
the MFC_CNTL value in the CSA before or-ing in the updated status.
Also, we add the Q bit to the updated status.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
---
 arch/powerpc/platforms/cell/spufs/switch.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/arch/powerpc/platforms/cell/spufs/switch.c b/arch/powerpc/platforms/cell/spufs/switch.c
index 4131784216b..53361d0c070 100644
--- a/arch/powerpc/platforms/cell/spufs/switch.c
+++ b/arch/powerpc/platforms/cell/spufs/switch.c
@@ -250,16 +250,21 @@ static inline void save_spu_status(struct spu_state *csa, struct spu *spu)
 	}
 }
 
-static inline void save_mfc_decr(struct spu_state *csa, struct spu *spu)
+static inline void save_mfc_stopped_status(struct spu_state *csa,
+		struct spu *spu)
 {
 	struct spu_priv2 __iomem *priv2 = spu->priv2;
+	const u64 mask = MFC_CNTL_DECREMENTER_RUNNING |
+			MFC_CNTL_DMA_QUEUES_EMPTY;
 
 	/* Save, Step 12:
 	 *     Read MFC_CNTL[Ds].  Update saved copy of
 	 *     CSA.MFC_CNTL[Ds].
+	 *
+	 * update: do the same with MFC_CNTL[Q].
 	 */
-	csa->priv2.mfc_control_RW |=
-		in_be64(&priv2->mfc_control_RW) & MFC_CNTL_DECREMENTER_RUNNING;
+	csa->priv2.mfc_control_RW &= ~mask;
+	csa->priv2.mfc_control_RW |= in_be64(&priv2->mfc_control_RW) & mask;
 }
 
 static inline void halt_mfc_decr(struct spu_state *csa, struct spu *spu)
@@ -1791,7 +1796,7 @@ static int quiece_spu(struct spu_state *prev, struct spu *spu)
 	save_spu_runcntl(prev, spu);	        /* Step 9. */
 	save_mfc_sr1(prev, spu);	        /* Step 10. */
 	save_spu_status(prev, spu);	        /* Step 11. */
-	save_mfc_decr(prev, spu);	        /* Step 12. */
+	save_mfc_stopped_status(prev, spu);     /* Step 12. */
 	halt_mfc_decr(prev, spu);	        /* Step 13. */
 	save_timebase(prev, spu);		/* Step 14. */
 	remove_other_spu_access(prev, spu);	/* Step 15. */
-- 
cgit v1.2.3


From c0bace5c7029ef7cbb6e6ffaa0469a3c042e5029 Mon Sep 17 00:00:00 2001
From: Jeremy Kerr <jk@ozlabs.org>
Date: Wed, 23 Apr 2008 14:24:27 +1000
Subject: [POWERPC] spufs: update master runcntl with context lock held

Currently, we update the SPU master run control bit (ie,
spu_enable_spu) in spufs_run_spu before we grab the context mutex. This
can result in races with other processes accessing this context's
resources.

This change moves the spu_enable_spu to after we have acquired the
context lock.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
---
 arch/powerpc/platforms/cell/spufs/run.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/platforms/cell/spufs/run.c b/arch/powerpc/platforms/cell/spufs/run.c
index a9c35b7b719..0634fecfe54 100644
--- a/arch/powerpc/platforms/cell/spufs/run.c
+++ b/arch/powerpc/platforms/cell/spufs/run.c
@@ -343,13 +343,14 @@ long spufs_run_spu(struct spu_context *ctx, u32 *npc, u32 *event)
 	if (mutex_lock_interruptible(&ctx->run_mutex))
 		return -ERESTARTSYS;
 
-	spu_enable_spu(ctx);
 	ctx->event_return = 0;
 
 	ret = spu_acquire(ctx);
 	if (ret)
 		goto out_unlock;
 
+	spu_enable_spu(ctx);
+
 	spu_update_sched_info(ctx);
 
 	ret = spu_run_init(ctx, npc);
-- 
cgit v1.2.3


From d29694f0681e188cf75477f20904041744e78ef7 Mon Sep 17 00:00:00 2001
From: Jeremy Kerr <jk@ozlabs.org>
Date: Wed, 23 Apr 2008 16:02:10 +1000
Subject: [POWERPC] spufs: don't acquire state_mutex interruptible while
 performing callback

There's currently no way to tell if spu_process_callback has
returned with the state mutex held, as -EINTR may be returned
by either the syscall or the spu_acquire fail case.

Instead, just do a non-interruptible mutex_lock here.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
---
 arch/powerpc/platforms/cell/spufs/run.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/arch/powerpc/platforms/cell/spufs/run.c b/arch/powerpc/platforms/cell/spufs/run.c
index 0634fecfe54..e764a43b544 100644
--- a/arch/powerpc/platforms/cell/spufs/run.c
+++ b/arch/powerpc/platforms/cell/spufs/run.c
@@ -294,7 +294,7 @@ static int spu_process_callback(struct spu_context *ctx)
 	u32 ls_pointer, npc;
 	void __iomem *ls;
 	long spu_ret;
-	int ret, ret2;
+	int ret;
 
 	/* get syscall block from local store */
 	npc = ctx->ops->npc_read(ctx) & ~3;
@@ -316,11 +316,9 @@ static int spu_process_callback(struct spu_context *ctx)
 		if (spu_ret <= -ERESTARTSYS) {
 			ret = spu_handle_restartsys(ctx, &spu_ret, &npc);
 		}
-		ret2 = spu_acquire(ctx);
+		mutex_lock(&ctx->state_mutex);
 		if (ret == -ERESTARTSYS)
 			return ret;
-		if (ret2)
-			return -EINTR;
 	}
 
 	/* need to re-get the ls, as it may have changed when we released the
-- 
cgit v1.2.3


From 093c16bf9b107433643cbf0843ca7808df90823b Mon Sep 17 00:00:00 2001
From: Luke Browning <lukebr@linux.vnet.ibm.com>
Date: Fri, 25 Apr 2008 14:00:00 +1000
Subject: [POWERPC] spufs: set SPU_CONTEXT_SWITCH_PENDING before synchronising
 SPU irqs

synchronize_irq() provides the serialization for
SPU_CONTEXT_SWITCH_PENDING which is read with a simple load. This
routine guarantees that the relevant interrupt handlers are not running,
so that the next time they do run they will see the update
memory value.

This must be done correctly so that exception handling code does not
restart the mfc in the middle of a context switch while we are trying
to atomically stop it and save state.

Signed-off-by: Luke Browning <lukebr@linux.vnet.ibm.com>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
---
 arch/powerpc/platforms/cell/spufs/switch.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/platforms/cell/spufs/switch.c b/arch/powerpc/platforms/cell/spufs/switch.c
index 53361d0c070..9748808b0f1 100644
--- a/arch/powerpc/platforms/cell/spufs/switch.c
+++ b/arch/powerpc/platforms/cell/spufs/switch.c
@@ -132,6 +132,13 @@ static inline void disable_interrupts(struct spu_state *csa, struct spu *spu)
 	spu_int_mask_set(spu, 2, 0ul);
 	eieio();
 	spin_unlock_irq(&spu->register_lock);
+
+	/*
+	 * This flag needs to be set before calling synchronize_irq so
+	 * that the update will be visible to the relevant handlers
+	 * via a simple load.
+	 */
+	set_bit(SPU_CONTEXT_SWITCH_PENDING, &spu->flags);
 	synchronize_irq(spu->irqs[0]);
 	synchronize_irq(spu->irqs[1]);
 	synchronize_irq(spu->irqs[2]);
@@ -166,9 +173,8 @@ static inline void set_switch_pending(struct spu_state *csa, struct spu *spu)
 	/* Save, Step 7:
 	 * Restore, Step 5:
 	 *     Set a software context switch pending flag.
+	 *     Done above in Step 3 - disable_interrupts().
 	 */
-	set_bit(SPU_CONTEXT_SWITCH_PENDING, &spu->flags);
-	mb();
 }
 
 static inline void save_mfc_cntl(struct spu_state *csa, struct spu *spu)
-- 
cgit v1.2.3


From 7a2142002f29a7b398c49da9bdec712dc57087c7 Mon Sep 17 00:00:00 2001
From: Luke Browning <lukebr@linux.vnet.ibm.com>
Date: Mon, 28 Apr 2008 14:32:34 +1000
Subject: [POWERPC] spufs: try to route SPU interrupts to local node

Currently, we re-route SPU interrupts to the current cpu, which may be
on a remote node. In the case of time slicing, all spu interrupts will
end up routed to the same cpu, where the spusched_tick occurs.

This change routes mfc interrupts to the cpu where the controlling
thread last ran, provided that cpu is on the same node as the spu
(otherwise don't reroute interrupts).

This should improve performance and provide a more predictable
environment for processing spu exceptions. In the past we have seen
concurrent delivery of spu exceptions to two cpus. This eliminates that
concern.

Signed-off-by: Luke Browning <lukebr@linux.vnet.ibm.com>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
---
 arch/powerpc/platforms/cell/spu_priv1_mmio.c | 16 ++++++++++++++--
 arch/powerpc/platforms/cell/spufs/sched.c    |  4 +++-
 arch/powerpc/platforms/cell/spufs/spufs.h    |  1 +
 arch/powerpc/platforms/cell/spufs/switch.c   |  8 ++++++++
 4 files changed, 26 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/platforms/cell/spu_priv1_mmio.c b/arch/powerpc/platforms/cell/spu_priv1_mmio.c
index 67fa7247b80..906a0a2a9fe 100644
--- a/arch/powerpc/platforms/cell/spu_priv1_mmio.c
+++ b/arch/powerpc/platforms/cell/spu_priv1_mmio.c
@@ -28,6 +28,7 @@
 #include <linux/io.h>
 #include <linux/mutex.h>
 #include <linux/device.h>
+#include <linux/sched.h>
 
 #include <asm/spu.h>
 #include <asm/spu_priv1.h>
@@ -75,8 +76,19 @@ static u64 int_stat_get(struct spu *spu, int class)
 
 static void cpu_affinity_set(struct spu *spu, int cpu)
 {
-	u64 target = iic_get_target_id(cpu);
-	u64 route = target << 48 | target << 32 | target << 16;
+	u64 target;
+	u64 route;
+
+	if (nr_cpus_node(spu->node)) {
+		cpumask_t spumask = node_to_cpumask(spu->node);
+		cpumask_t cpumask = node_to_cpumask(cpu_to_node(cpu));
+
+		if (!cpus_intersects(spumask, cpumask))
+			return;
+	}
+
+	target = iic_get_target_id(cpu);
+	route = target << 48 | target << 32 | target << 16;
 	out_be64(&spu->priv1->int_route_RW, route);
 }
 
diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c
index 62280c292aa..1df7d6d152c 100644
--- a/arch/powerpc/platforms/cell/spufs/sched.c
+++ b/arch/powerpc/platforms/cell/spufs/sched.c
@@ -140,6 +140,9 @@ void __spu_update_sched_info(struct spu_context *ctx)
 	 * if it is timesliced or preempted.
 	 */
 	ctx->cpus_allowed = current->cpus_allowed;
+
+	/* Save the current cpu id for spu interrupt routing. */
+	ctx->last_ran = raw_smp_processor_id();
 }
 
 void spu_update_sched_info(struct spu_context *ctx)
@@ -243,7 +246,6 @@ static void spu_bind_context(struct spu *spu, struct spu_context *ctx)
 	spu_switch_log_notify(spu, ctx, SWITCH_LOG_START, 0);
 	spu_restore(&ctx->csa, spu);
 	spu->timestamp = jiffies;
-	spu_cpu_affinity_set(spu, raw_smp_processor_id());
 	spu_switch_notify(spu, ctx);
 	ctx->state = SPU_STATE_RUNNABLE;
 
diff --git a/arch/powerpc/platforms/cell/spufs/spufs.h b/arch/powerpc/platforms/cell/spufs/spufs.h
index 7312745b754..dc3a215a6a2 100644
--- a/arch/powerpc/platforms/cell/spufs/spufs.h
+++ b/arch/powerpc/platforms/cell/spufs/spufs.h
@@ -121,6 +121,7 @@ struct spu_context {
 	cpumask_t cpus_allowed;
 	int policy;
 	int prio;
+	int last_ran;
 
 	/* statistics */
 	struct {
diff --git a/arch/powerpc/platforms/cell/spufs/switch.c b/arch/powerpc/platforms/cell/spufs/switch.c
index 9748808b0f1..47c658051fc 100644
--- a/arch/powerpc/platforms/cell/spufs/switch.c
+++ b/arch/powerpc/platforms/cell/spufs/switch.c
@@ -1704,6 +1704,13 @@ static inline void restore_mfc_sr1(struct spu_state *csa, struct spu *spu)
 	eieio();
 }
 
+static inline void set_int_route(struct spu_state *csa, struct spu *spu)
+{
+	struct spu_context *ctx = spu->ctx;
+
+	spu_cpu_affinity_set(spu, ctx->last_ran);
+}
+
 static inline void restore_other_spu_access(struct spu_state *csa,
 					    struct spu *spu)
 {
@@ -2014,6 +2021,7 @@ static void restore_csa(struct spu_state *next, struct spu *spu)
 	check_ppuint_mb_stat(next, spu);	/* Step 67. */
 	spu_invalidate_slbs(spu);		/* Modified Step 68. */
 	restore_mfc_sr1(next, spu);	        /* Step 69. */
+	set_int_route(next, spu);		/* NEW      */
 	restore_other_spu_access(next, spu);	/* Step 70. */
 	restore_spu_runcntl(next, spu);	        /* Step 71. */
 	restore_mfc_cntl(next, spu);	        /* Step 72. */
-- 
cgit v1.2.3


From f3d69e0507f84903059d456c5d19f10b2df3ac69 Mon Sep 17 00:00:00 2001
From: Luke Browning <lukebr@linux.vnet.ibm.com>
Date: Sun, 27 Apr 2008 18:41:55 +0000
Subject: [POWERPC] spufs: fix concurrent delivery of class 0 & 1 exceptions

SPU class 0 & 1 exceptions may occur in parallel, so we may end up
overwriting csa.dsisr.

This change adds dedicated fields for each class to the spu and the spu
context so that fault data is not overwritten.

Signed-off-by: Luke Browning <lukebr@linux.vnet.ibm.com>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
---
 arch/powerpc/platforms/cell/spu_base.c    | 27 ++++++++++++++++++---------
 arch/powerpc/platforms/cell/spufs/fault.c | 17 +++++++++++------
 arch/powerpc/platforms/cell/spufs/run.c   | 29 +++++++++++++++++++----------
 arch/powerpc/platforms/cell/spufs/spufs.h |  2 +-
 arch/powerpc/xmon/xmon.c                  |  6 ++++--
 include/asm-powerpc/spu.h                 |  8 +++++---
 include/asm-powerpc/spu_csa.h             |  3 ++-
 7 files changed, 60 insertions(+), 32 deletions(-)

diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c
index 6bab44b7716..b9ae675640d 100644
--- a/arch/powerpc/platforms/cell/spu_base.c
+++ b/arch/powerpc/platforms/cell/spu_base.c
@@ -226,11 +226,13 @@ static int __spu_trap_data_map(struct spu *spu, unsigned long ea, u64 dsisr)
 		return 0;
 	}
 
-	spu->class_0_pending = 0;
-	spu->dar = ea;
-	spu->dsisr = dsisr;
+	spu->class_1_dar = ea;
+	spu->class_1_dsisr = dsisr;
+
+	spu->stop_callback(spu, 1);
 
-	spu->stop_callback(spu);
+	spu->class_1_dar = 0;
+	spu->class_1_dsisr = 0;
 
 	return 0;
 }
@@ -318,11 +320,15 @@ spu_irq_class_0(int irq, void *data)
 	stat = spu_int_stat_get(spu, 0) & mask;
 
 	spu->class_0_pending |= stat;
-	spu->dsisr = spu_mfc_dsisr_get(spu);
-	spu->dar = spu_mfc_dar_get(spu);
+	spu->class_0_dsisr = spu_mfc_dsisr_get(spu);
+	spu->class_0_dar = spu_mfc_dar_get(spu);
 	spin_unlock(&spu->register_lock);
 
-	spu->stop_callback(spu);
+	spu->stop_callback(spu, 0);
+
+	spu->class_0_pending = 0;
+	spu->class_0_dsisr = 0;
+	spu->class_0_dar = 0;
 
 	spu_int_stat_clear(spu, 0, stat);
 
@@ -363,6 +369,9 @@ spu_irq_class_1(int irq, void *data)
 	if (stat & CLASS1_LS_COMPARE_SUSPEND_ON_PUT_INTR)
 		;
 
+	spu->class_1_dsisr = 0;
+	spu->class_1_dar = 0;
+
 	return stat ? IRQ_HANDLED : IRQ_NONE;
 }
 
@@ -396,10 +405,10 @@ spu_irq_class_2(int irq, void *data)
 		spu->ibox_callback(spu);
 
 	if (stat & CLASS2_SPU_STOP_INTR)
-		spu->stop_callback(spu);
+		spu->stop_callback(spu, 2);
 
 	if (stat & CLASS2_SPU_HALT_INTR)
-		spu->stop_callback(spu);
+		spu->stop_callback(spu, 2);
 
 	if (stat & CLASS2_SPU_DMA_TAG_GROUP_COMPLETE_INTR)
 		spu->mfc_callback(spu);
diff --git a/arch/powerpc/platforms/cell/spufs/fault.c b/arch/powerpc/platforms/cell/spufs/fault.c
index e46d300e21a..f093a581ac7 100644
--- a/arch/powerpc/platforms/cell/spufs/fault.c
+++ b/arch/powerpc/platforms/cell/spufs/fault.c
@@ -83,13 +83,18 @@ int spufs_handle_class0(struct spu_context *ctx)
 		return 0;
 
 	if (stat & CLASS0_DMA_ALIGNMENT_INTR)
-		spufs_handle_event(ctx, ctx->csa.dar, SPE_EVENT_DMA_ALIGNMENT);
+		spufs_handle_event(ctx, ctx->csa.class_0_dar,
+			SPE_EVENT_DMA_ALIGNMENT);
 
 	if (stat & CLASS0_INVALID_DMA_COMMAND_INTR)
-		spufs_handle_event(ctx, ctx->csa.dar, SPE_EVENT_INVALID_DMA);
+		spufs_handle_event(ctx, ctx->csa.class_0_dar,
+			SPE_EVENT_INVALID_DMA);
 
 	if (stat & CLASS0_SPU_ERROR_INTR)
-		spufs_handle_event(ctx, ctx->csa.dar, SPE_EVENT_SPE_ERROR);
+		spufs_handle_event(ctx, ctx->csa.class_0_dar,
+			SPE_EVENT_SPE_ERROR);
+
+	ctx->csa.class_0_pending = 0;
 
 	return -EIO;
 }
@@ -119,8 +124,8 @@ int spufs_handle_class1(struct spu_context *ctx)
 	 * in time, we can still expect to get the same fault
 	 * the immediately after the context restore.
 	 */
-	ea = ctx->csa.dar;
-	dsisr = ctx->csa.dsisr;
+	ea = ctx->csa.class_1_dar;
+	dsisr = ctx->csa.class_1_dsisr;
 
 	if (!(dsisr & (MFC_DSISR_PTE_NOT_FOUND | MFC_DSISR_ACCESS_DENIED)))
 		return 0;
@@ -158,7 +163,7 @@ int spufs_handle_class1(struct spu_context *ctx)
 	 * time slicing will not preempt the context while the page fault
 	 * handler is running. Context switch code removes mappings.
 	 */
-	ctx->csa.dar = ctx->csa.dsisr = 0;
+	ctx->csa.class_1_dar = ctx->csa.class_1_dsisr = 0;
 
 	/*
 	 * If we handled the fault successfully and are in runnable
diff --git a/arch/powerpc/platforms/cell/spufs/run.c b/arch/powerpc/platforms/cell/spufs/run.c
index e764a43b544..b7493b86581 100644
--- a/arch/powerpc/platforms/cell/spufs/run.c
+++ b/arch/powerpc/platforms/cell/spufs/run.c
@@ -11,7 +11,7 @@
 #include "spufs.h"
 
 /* interrupt-level stop callback function. */
-void spufs_stop_callback(struct spu *spu)
+void spufs_stop_callback(struct spu *spu, int irq)
 {
 	struct spu_context *ctx = spu->ctx;
 
@@ -24,9 +24,19 @@ void spufs_stop_callback(struct spu *spu)
 	 */
 	if (ctx) {
 		/* Copy exception arguments into module specific structure */
-		ctx->csa.class_0_pending = spu->class_0_pending;
-		ctx->csa.dsisr = spu->dsisr;
-		ctx->csa.dar = spu->dar;
+		switch(irq) {
+		case 0 :
+			ctx->csa.class_0_pending = spu->class_0_pending;
+			ctx->csa.class_0_dsisr = spu->class_0_dsisr;
+			ctx->csa.class_0_dar = spu->class_0_dar;
+			break;
+		case 1 :
+			ctx->csa.class_1_dsisr = spu->class_1_dsisr;
+			ctx->csa.class_1_dar = spu->class_1_dar;
+			break;
+		case 2 :
+			break;
+		}
 
 		/* ensure that the exception status has hit memory before a
 		 * thread waiting on the context's stop queue is woken */
@@ -34,11 +44,6 @@ void spufs_stop_callback(struct spu *spu)
 
 		wake_up_all(&ctx->stop_wq);
 	}
-
-	/* Clear callback arguments from spu structure */
-	spu->class_0_pending = 0;
-	spu->dsisr = 0;
-	spu->dar = 0;
 }
 
 int spu_stopped(struct spu_context *ctx, u32 *stat)
@@ -56,7 +61,11 @@ int spu_stopped(struct spu_context *ctx, u32 *stat)
 	if (!(*stat & SPU_STATUS_RUNNING) && (*stat & stopped))
 		return 1;
 
-	dsisr = ctx->csa.dsisr;
+	dsisr = ctx->csa.class_0_dsisr;
+	if (dsisr & (MFC_DSISR_PTE_NOT_FOUND | MFC_DSISR_ACCESS_DENIED))
+		return 1;
+
+	dsisr = ctx->csa.class_1_dsisr;
 	if (dsisr & (MFC_DSISR_PTE_NOT_FOUND | MFC_DSISR_ACCESS_DENIED))
 		return 1;
 
diff --git a/arch/powerpc/platforms/cell/spufs/spufs.h b/arch/powerpc/platforms/cell/spufs/spufs.h
index dc3a215a6a2..454c277c145 100644
--- a/arch/powerpc/platforms/cell/spufs/spufs.h
+++ b/arch/powerpc/platforms/cell/spufs/spufs.h
@@ -332,7 +332,7 @@ size_t spu_ibox_read(struct spu_context *ctx, u32 *data);
 /* irq callback funcs. */
 void spufs_ibox_callback(struct spu *spu);
 void spufs_wbox_callback(struct spu *spu);
-void spufs_stop_callback(struct spu *spu);
+void spufs_stop_callback(struct spu *spu, int irq);
 void spufs_mfc_callback(struct spu *spu);
 void spufs_dma_callback(struct spu *spu, int type);
 
diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index 52c74780f40..1702de9395e 100644
--- a/arch/powerpc/xmon/xmon.c
+++ b/arch/powerpc/xmon/xmon.c
@@ -2842,9 +2842,11 @@ static void dump_spu_fields(struct spu *spu)
 	DUMP_FIELD(spu, "0x%lx", ls_size);
 	DUMP_FIELD(spu, "0x%x", node);
 	DUMP_FIELD(spu, "0x%lx", flags);
-	DUMP_FIELD(spu, "0x%lx", dar);
-	DUMP_FIELD(spu, "0x%lx", dsisr);
 	DUMP_FIELD(spu, "%d", class_0_pending);
+	DUMP_FIELD(spu, "0x%lx", class_0_dar);
+	DUMP_FIELD(spu, "0x%lx", class_0_dsisr);
+	DUMP_FIELD(spu, "0x%lx", class_1_dar);
+	DUMP_FIELD(spu, "0x%lx", class_1_dsisr);
 	DUMP_FIELD(spu, "0x%lx", irqs[0]);
 	DUMP_FIELD(spu, "0x%lx", irqs[1]);
 	DUMP_FIELD(spu, "0x%lx", irqs[2]);
diff --git a/include/asm-powerpc/spu.h b/include/asm-powerpc/spu.h
index e3c845b0f76..882aa953968 100644
--- a/include/asm-powerpc/spu.h
+++ b/include/asm-powerpc/spu.h
@@ -128,9 +128,11 @@ struct spu {
 	unsigned int irqs[3];
 	u32 node;
 	u64 flags;
-	u64 dar;
-	u64 dsisr;
 	u64 class_0_pending;
+	u64 class_0_dar;
+	u64 class_0_dsisr;
+	u64 class_1_dar;
+	u64 class_1_dsisr;
 	size_t ls_size;
 	unsigned int slb_replace;
 	struct mm_struct *mm;
@@ -143,7 +145,7 @@ struct spu {
 
 	void (* wbox_callback)(struct spu *spu);
 	void (* ibox_callback)(struct spu *spu);
-	void (* stop_callback)(struct spu *spu);
+	void (* stop_callback)(struct spu *spu, int irq);
 	void (* mfc_callback)(struct spu *spu);
 
 	char irq_c0[8];
diff --git a/include/asm-powerpc/spu_csa.h b/include/asm-powerpc/spu_csa.h
index 0ab6bff8607..129ec148d45 100644
--- a/include/asm-powerpc/spu_csa.h
+++ b/include/asm-powerpc/spu_csa.h
@@ -254,7 +254,8 @@ struct spu_state {
 	u64 spu_chnldata_RW[32];
 	u32 spu_mailbox_data[4];
 	u32 pu_mailbox_data[1];
-	u64 dar, dsisr, class_0_pending;
+	u64 class_0_dar, class_0_dsisr, class_0_pending;
+	u64 class_1_dar, class_1_dsisr;
 	unsigned long suspend_time;
 	spinlock_t register_lock;
 };
-- 
cgit v1.2.3


From de1028927ae3487e2e450dacf50fbf32042aee18 Mon Sep 17 00:00:00 2001
From: Luke Browning <lukebr@linux.vnet.ibm.com>
Date: Mon, 28 Apr 2008 17:35:56 +1000
Subject: [POWERPC] spufs: handle faults while the context switch pending flag
 is set

Currently, page fault handlers don't issue a mfc restart if the context
switch pending flag is set, which can leave us with a hanging DMA after
a context restore.

This patch introduces fault pending flag that is set by the fault
handler and read by the context switch code, so that the latter can add
the restart bit at the right spot, after it has successfuly saved the
state of the mfc control register.

Signed-off-by: Luke Browning <lukebr@linux.vnet.ibm.com>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
---
 arch/powerpc/platforms/cell/spu_base.c     |  4 ++++
 arch/powerpc/platforms/cell/spufs/switch.c | 23 ++++++++++++++---------
 include/asm-powerpc/spu.h                  |  1 +
 3 files changed, 19 insertions(+), 9 deletions(-)

diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c
index b9ae675640d..70c660121ec 100644
--- a/arch/powerpc/platforms/cell/spu_base.c
+++ b/arch/powerpc/platforms/cell/spu_base.c
@@ -141,6 +141,10 @@ static void spu_restart_dma(struct spu *spu)
 
 	if (!test_bit(SPU_CONTEXT_SWITCH_PENDING, &spu->flags))
 		out_be64(&priv2->mfc_control_RW, MFC_CNTL_RESTART_DMA_COMMAND);
+	else {
+		set_bit(SPU_CONTEXT_FAULT_PENDING, &spu->flags);
+		mb();
+	}
 }
 
 static inline void spu_load_slb(struct spu *spu, int slbe, struct spu_slb *slb)
diff --git a/arch/powerpc/platforms/cell/spufs/switch.c b/arch/powerpc/platforms/cell/spufs/switch.c
index 47c658051fc..3df9a36eb2f 100644
--- a/arch/powerpc/platforms/cell/spufs/switch.c
+++ b/arch/powerpc/platforms/cell/spufs/switch.c
@@ -139,6 +139,7 @@ static inline void disable_interrupts(struct spu_state *csa, struct spu *spu)
 	 * via a simple load.
 	 */
 	set_bit(SPU_CONTEXT_SWITCH_PENDING, &spu->flags);
+	clear_bit(SPU_CONTEXT_FAULT_PENDING, &spu->flags);
 	synchronize_irq(spu->irqs[0]);
 	synchronize_irq(spu->irqs[1]);
 	synchronize_irq(spu->irqs[2]);
@@ -739,10 +740,14 @@ static inline void set_switch_active(struct spu_state *csa, struct spu *spu)
 	/* Save, Step 48:
 	 * Restore, Step 23.
 	 *     Change the software context switch pending flag
-	 *     to context switch active.
+	 *     to context switch active.  This implementation does
+	 *     not uses a switch active flag.
 	 *
-	 *     This implementation does not uses a switch active flag.
+	 * Now that we have saved the mfc in the csa, we can add in the
+	 * restart command if an exception occurred.
 	 */
+	if (test_bit(SPU_CONTEXT_FAULT_PENDING, &spu->flags))
+		csa->priv2.mfc_control_RW |= MFC_CNTL_RESTART_DMA_COMMAND;
 	clear_bit(SPU_CONTEXT_SWITCH_PENDING, &spu->flags);
 	mb();
 }
@@ -1742,15 +1747,15 @@ static inline void restore_mfc_cntl(struct spu_state *csa, struct spu *spu)
 	 */
 	out_be64(&priv2->mfc_control_RW, csa->priv2.mfc_control_RW);
 	eieio();
+
 	/*
-	 * FIXME: this is to restart a DMA that we were processing
-	 *        before the save. better remember the fault information
-	 *        in the csa instead.
+	 * The queue is put back into the same state that was evident prior to
+	 * the context switch. The suspend flag is added to the saved state in
+	 * the csa, if the operational state was suspending or suspended. In
+	 * this case, the code that suspended the mfc is responsible for
+	 * continuing it. Note that SPE faults do not change the operational
+	 * state of the spu.
 	 */
-	if ((csa->priv2.mfc_control_RW & MFC_CNTL_SUSPEND_DMA_QUEUE_MASK)) {
-		out_be64(&priv2->mfc_control_RW, MFC_CNTL_RESTART_DMA_COMMAND);
-		eieio();
-	}
 }
 
 static inline void enable_user_access(struct spu_state *csa, struct spu *spu)
diff --git a/include/asm-powerpc/spu.h b/include/asm-powerpc/spu.h
index 882aa953968..6abead6e681 100644
--- a/include/asm-powerpc/spu.h
+++ b/include/asm-powerpc/spu.h
@@ -100,6 +100,7 @@
 
 /* Flag indicating progress during context switch. */
 #define SPU_CONTEXT_SWITCH_PENDING	0UL
+#define SPU_CONTEXT_FAULT_PENDING	1UL
 
 struct spu_context;
 struct spu_runqueue;
-- 
cgit v1.2.3


From 826be063eee9b4c2703fd86cfc9723bc391ff1cb Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@lst.de>
Date: Tue, 6 May 2008 09:24:24 +1000
Subject: [POWERPC] spufs: spu_create should send inotify IM_CREATE event

Creating a spufs context or gand using spu_create should send an inotify
event so that things like performance monitors have an easy way to find
out about newly created contexts.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
---
 arch/powerpc/platforms/cell/spufs/inode.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/platforms/cell/spufs/inode.c b/arch/powerpc/platforms/cell/spufs/inode.c
index 0c32a05ab06..5faedf5a09a 100644
--- a/arch/powerpc/platforms/cell/spufs/inode.c
+++ b/arch/powerpc/platforms/cell/spufs/inode.c
@@ -23,6 +23,7 @@
 
 #include <linux/file.h>
 #include <linux/fs.h>
+#include <linux/fsnotify.h>
 #include <linux/backing-dev.h>
 #include <linux/init.h>
 #include <linux/ioctl.h>
@@ -618,12 +619,15 @@ long spufs_create(struct nameidata *nd, unsigned int flags, mode_t mode,
 	mode &= ~current->fs->umask;
 
 	if (flags & SPU_CREATE_GANG)
-		return spufs_create_gang(nd->path.dentry->d_inode,
+		ret = spufs_create_gang(nd->path.dentry->d_inode,
 					 dentry, nd->path.mnt, mode);
 	else
-		return spufs_create_context(nd->path.dentry->d_inode,
+		ret = spufs_create_context(nd->path.dentry->d_inode,
 					    dentry, nd->path.mnt, flags, mode,
 					    filp);
+	if (ret >= 0)
+		fsnotify_mkdir(nd->path.dentry->d_inode, dentry);
+	return ret;
 
 out_dput:
 	dput(dentry);
-- 
cgit v1.2.3


From a96df496ed1496f3e52a9b3c860cf967aa48adda Mon Sep 17 00:00:00 2001
From: Stefan Roese <sr@denx.de>
Date: Mon, 5 May 2008 16:53:19 +1000
Subject: [POWERPC] 4xx: Fix problem with new TLB storage attibute fields on
 440x6 core

The new 440x6 core used on AMCC 460EX/GT introduces new storage attibure
fields to the TLB2 word. Those are:

Bit  11   12   13   14   15
     WL1  IL1I IL1D IL2I IL2D

With these bits the cache (L1 and L2) can be configured in a more flexible
way, instruction- and data-cache independently now. The "old" I and W bits
are still available and setting these old bits will automically set these
new bits too (for backward compatibilty).

The current code does not clear these fields resulting in disabling the cache
by chance. This patch now makes sure that these new bits are cleared when
the TLB2 word is written.

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
---
 arch/powerpc/kernel/head_44x.S      | 9 ++++++++-
 include/asm-powerpc/pgtable-ppc32.h | 7 +++++++
 2 files changed, 15 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/kernel/head_44x.S b/arch/powerpc/kernel/head_44x.S
index b84ec6a2fc9..c2b9dc4fce5 100644
--- a/arch/powerpc/kernel/head_44x.S
+++ b/arch/powerpc/kernel/head_44x.S
@@ -653,7 +653,14 @@ finish_tlb_load:
 	rlwimi	r10, r11, 0, 26, 26		/* UX = HWEXEC & USER */
 
 	rlwimi	r12, r10, 0, 26, 31		/* Insert static perms */
-	rlwinm	r12, r12, 0, 20, 15		/* Clear U0-U3 */
+
+	/*
+	 * Clear U0-U3 and WL1 IL1I IL1D IL2I IL2D bits which are added
+	 * on newer 440 cores like the 440x6 used on AMCC 460EX/460GT (see
+	 * include/asm-powerpc/pgtable-ppc32.h for details).
+	 */
+	rlwinm	r12, r12, 0, 20, 10
+
 	tlbwe	r12, r13, PPC44x_TLB_ATTRIB	/* Write ATTRIB */
 
 	/* Done...restore registers and get out of here.
diff --git a/include/asm-powerpc/pgtable-ppc32.h b/include/asm-powerpc/pgtable-ppc32.h
index 7c97b5a08d0..c08e714d0c4 100644
--- a/include/asm-powerpc/pgtable-ppc32.h
+++ b/include/asm-powerpc/pgtable-ppc32.h
@@ -209,6 +209,13 @@ extern int icache_44x_need_flush;
  *   0  1  2  3  4  ... 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
  *   -  -  -  -  -    - U0 U1 U2 U3 W  I  M  G  E   - UX UW UR SX SW SR
  *
+ * Newer 440 cores (440x6 as used on AMCC 460EX/460GT) have additional
+ * TLB2 storage attibute fields. Those are:
+ *
+ *   TLB2:
+ *   0...10    11   12   13   14   15   16...31
+ *   no change WL1  IL1I IL1D IL2I IL2D no change
+ *
  * There are some constrains and options, to decide mapping software bits
  * into TLB entry.
  *
-- 
cgit v1.2.3


From 80daac3f86d4f5aafc9d3e79addb90fa118244e2 Mon Sep 17 00:00:00 2001
From: Stefan Roese <sr@denx.de>
Date: Tue, 22 Apr 2008 00:54:30 +1000
Subject: [POWERPC] 4xx: Add endpoint support to 4xx PCIe driver

This patch adds basic endpoint support to the 4xx PCIe driver.

This is done by checking the device_type property of the PCIe
device node ("pci" for root-complex and "pci-endpoint" for endpoint
configuration).

Note: Currently we map a fixed 64MByte window to PLB address 0 (SDRAM).
This should probably be configurable via a dts property.

Signed-off-by: Stefan Roese <sr@denx.de>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
---
 arch/powerpc/sysdev/ppc4xx_pci.c | 180 ++++++++++++++++++++++++++++-----------
 1 file changed, 131 insertions(+), 49 deletions(-)

diff --git a/arch/powerpc/sysdev/ppc4xx_pci.c b/arch/powerpc/sysdev/ppc4xx_pci.c
index 1814adbd223..b4a54c52e88 100644
--- a/arch/powerpc/sysdev/ppc4xx_pci.c
+++ b/arch/powerpc/sysdev/ppc4xx_pci.c
@@ -1387,28 +1387,59 @@ static void __init ppc4xx_configure_pciex_PIMs(struct ppc4xx_pciex_port *port,
 	resource_size_t size = res->end - res->start + 1;
 	u64 sa;
 
-	/* Calculate window size */
-	sa = (0xffffffffffffffffull << ilog2(size));;
-	if (res->flags & IORESOURCE_PREFETCH)
-		sa |= 0x8;
+	if (port->endpoint) {
+		resource_size_t ep_addr = 0;
+		resource_size_t ep_size = 32 << 20;
+
+		/* Currently we map a fixed 64MByte window to PLB address
+		 * 0 (SDRAM). This should probably be configurable via a dts
+		 * property.
+		 */
+
+		/* Calculate window size */
+		sa = (0xffffffffffffffffull << ilog2(ep_size));;
+
+		/* Setup BAR0 */
+		out_le32(mbase + PECFG_BAR0HMPA, RES_TO_U32_HIGH(sa));
+		out_le32(mbase + PECFG_BAR0LMPA, RES_TO_U32_LOW(sa) |
+			 PCI_BASE_ADDRESS_MEM_TYPE_64);
 
-	out_le32(mbase + PECFG_BAR0HMPA, RES_TO_U32_HIGH(sa));
-	out_le32(mbase + PECFG_BAR0LMPA, RES_TO_U32_LOW(sa));
+		/* Disable BAR1 & BAR2 */
+		out_le32(mbase + PECFG_BAR1MPA, 0);
+		out_le32(mbase + PECFG_BAR2HMPA, 0);
+		out_le32(mbase + PECFG_BAR2LMPA, 0);
 
-	/* The setup of the split looks weird to me ... let's see if it works */
-	out_le32(mbase + PECFG_PIM0LAL, 0x00000000);
-	out_le32(mbase + PECFG_PIM0LAH, 0x00000000);
-	out_le32(mbase + PECFG_PIM1LAL, 0x00000000);
-	out_le32(mbase + PECFG_PIM1LAH, 0x00000000);
-	out_le32(mbase + PECFG_PIM01SAH, 0xffff0000);
-	out_le32(mbase + PECFG_PIM01SAL, 0x00000000);
+		out_le32(mbase + PECFG_PIM01SAH, RES_TO_U32_HIGH(sa));
+		out_le32(mbase + PECFG_PIM01SAL, RES_TO_U32_LOW(sa));
+
+		out_le32(mbase + PCI_BASE_ADDRESS_0, RES_TO_U32_LOW(ep_addr));
+		out_le32(mbase + PCI_BASE_ADDRESS_1, RES_TO_U32_HIGH(ep_addr));
+	} else {
+		/* Calculate window size */
+		sa = (0xffffffffffffffffull << ilog2(size));;
+		if (res->flags & IORESOURCE_PREFETCH)
+			sa |= 0x8;
+
+		out_le32(mbase + PECFG_BAR0HMPA, RES_TO_U32_HIGH(sa));
+		out_le32(mbase + PECFG_BAR0LMPA, RES_TO_U32_LOW(sa));
+
+		/* The setup of the split looks weird to me ... let's see
+		 * if it works
+		 */
+		out_le32(mbase + PECFG_PIM0LAL, 0x00000000);
+		out_le32(mbase + PECFG_PIM0LAH, 0x00000000);
+		out_le32(mbase + PECFG_PIM1LAL, 0x00000000);
+		out_le32(mbase + PECFG_PIM1LAH, 0x00000000);
+		out_le32(mbase + PECFG_PIM01SAH, 0xffff0000);
+		out_le32(mbase + PECFG_PIM01SAL, 0x00000000);
+
+		out_le32(mbase + PCI_BASE_ADDRESS_0, RES_TO_U32_LOW(res->start));
+		out_le32(mbase + PCI_BASE_ADDRESS_1, RES_TO_U32_HIGH(res->start));
+	}
 
 	/* Enable inbound mapping */
 	out_le32(mbase + PECFG_PIMEN, 0x1);
 
-	out_le32(mbase + PCI_BASE_ADDRESS_0, RES_TO_U32_LOW(res->start));
-	out_le32(mbase + PCI_BASE_ADDRESS_1, RES_TO_U32_HIGH(res->start));
-
 	/* Enable I/O, Mem, and Busmaster cycles */
 	out_le16(mbase + PCI_COMMAND,
 		 in_le16(mbase + PCI_COMMAND) |
@@ -1422,13 +1453,8 @@ static void __init ppc4xx_pciex_port_setup_hose(struct ppc4xx_pciex_port *port)
 	const int *bus_range;
 	int primary = 0, busses;
 	void __iomem *mbase = NULL, *cfg_data = NULL;
-
-	/* XXX FIXME: Handle endpoint mode properly */
-	if (port->endpoint) {
-		printk(KERN_WARNING "PCIE%d: Port in endpoint mode !\n",
-		       port->index);
-		return;
-	}
+	const u32 *pval;
+	u32 val;
 
 	/* Check if primary bridge */
 	if (of_get_property(port->node, "primary", NULL))
@@ -1462,21 +1488,30 @@ static void __init ppc4xx_pciex_port_setup_hose(struct ppc4xx_pciex_port *port)
 		hose->last_busno = hose->first_busno + busses;
 	}
 
-	/* We map the external config space in cfg_data and the host config
-	 * space in cfg_addr. External space is 1M per bus, internal space
-	 * is 4K
+	if (!port->endpoint) {
+		/* Only map the external config space in cfg_data for
+		 * PCIe root-complexes. External space is 1M per bus
+		 */
+		cfg_data = ioremap(port->cfg_space.start +
+				   (hose->first_busno + 1) * 0x100000,
+				   busses * 0x100000);
+		if (cfg_data == NULL) {
+			printk(KERN_ERR "%s: Can't map external config space !",
+			       port->node->full_name);
+			goto fail;
+		}
+		hose->cfg_data = cfg_data;
+	}
+
+	/* Always map the host config space in cfg_addr.
+	 * Internal space is 4K
 	 */
-	cfg_data = ioremap(port->cfg_space.start +
-				 (hose->first_busno + 1) * 0x100000,
-				 busses * 0x100000);
 	mbase = ioremap(port->cfg_space.start + 0x10000000, 0x1000);
-	if (cfg_data == NULL || mbase == NULL) {
-		printk(KERN_ERR "%s: Can't map config space !",
+	if (mbase == NULL) {
+		printk(KERN_ERR "%s: Can't map internal config space !",
 		       port->node->full_name);
 		goto fail;
 	}
-
-	hose->cfg_data = cfg_data;
 	hose->cfg_addr = mbase;
 
 	pr_debug("PCIE %s, bus %d..%d\n", port->node->full_name,
@@ -1489,12 +1524,14 @@ static void __init ppc4xx_pciex_port_setup_hose(struct ppc4xx_pciex_port *port)
 	port->hose = hose;
 	mbase = (void __iomem *)hose->cfg_addr;
 
-	/*
-	 * Set bus numbers on our root port
-	 */
-	out_8(mbase + PCI_PRIMARY_BUS, hose->first_busno);
-	out_8(mbase + PCI_SECONDARY_BUS, hose->first_busno + 1);
-	out_8(mbase + PCI_SUBORDINATE_BUS, hose->last_busno);
+	if (!port->endpoint) {
+		/*
+		 * Set bus numbers on our root port
+		 */
+		out_8(mbase + PCI_PRIMARY_BUS, hose->first_busno);
+		out_8(mbase + PCI_SECONDARY_BUS, hose->first_busno + 1);
+		out_8(mbase + PCI_SUBORDINATE_BUS, hose->last_busno);
+	}
 
 	/*
 	 * OMRs are already reset, also disable PIMs
@@ -1515,17 +1552,49 @@ static void __init ppc4xx_pciex_port_setup_hose(struct ppc4xx_pciex_port *port)
 	ppc4xx_configure_pciex_PIMs(port, hose, mbase, &dma_window);
 
 	/* The root complex doesn't show up if we don't set some vendor
-	 * and device IDs into it. Those are the same bogus one that the
-	 * initial code in arch/ppc add. We might want to change that.
+	 * and device IDs into it. The defaults below are the same bogus
+	 * one that the initial code in arch/ppc had. This can be
+	 * overwritten by setting the "vendor-id/device-id" properties
+	 * in the pciex node.
 	 */
-	out_le16(mbase + 0x200, 0xaaa0 + port->index);
-	out_le16(mbase + 0x202, 0xbed0 + port->index);
 
-	/* Set Class Code to PCI-PCI bridge and Revision Id to 1 */
-	out_le32(mbase + 0x208, 0x06040001);
+	/* Get the (optional) vendor-/device-id from the device-tree */
+	pval = of_get_property(port->node, "vendor-id", NULL);
+	if (pval) {
+		val = *pval;
+	} else {
+		if (!port->endpoint)
+			val = 0xaaa0 + port->index;
+		else
+			val = 0xeee0 + port->index;
+	}
+	out_le16(mbase + 0x200, val);
+
+	pval = of_get_property(port->node, "device-id", NULL);
+	if (pval) {
+		val = *pval;
+	} else {
+		if (!port->endpoint)
+			val = 0xbed0 + port->index;
+		else
+			val = 0xfed0 + port->index;
+	}
+	out_le16(mbase + 0x202, val);
+
+	if (!port->endpoint) {
+		/* Set Class Code to PCI-PCI bridge and Revision Id to 1 */
+		out_le32(mbase + 0x208, 0x06040001);
+
+		printk(KERN_INFO "PCIE%d: successfully set as root-complex\n",
+		       port->index);
+	} else {
+		/* Set Class Code to Processor/PPC */
+		out_le32(mbase + 0x208, 0x0b200001);
+
+		printk(KERN_INFO "PCIE%d: successfully set as endpoint\n",
+		       port->index);
+	}
 
-	printk(KERN_INFO "PCIE%d: successfully set as root-complex\n",
-	       port->index);
 	return;
  fail:
 	if (hose)
@@ -1542,6 +1611,7 @@ static void __init ppc4xx_probe_pciex_bridge(struct device_node *np)
 	const u32 *pval;
 	int portno;
 	unsigned int dcrs;
+	const char *val;
 
 	/* First, proceed to core initialization as we assume there's
 	 * only one PCIe core in the system
@@ -1573,8 +1643,20 @@ static void __init ppc4xx_probe_pciex_bridge(struct device_node *np)
 	}
 	port->sdr_base = *pval;
 
-	/* XXX Currently, we only support root complex mode */
-	port->endpoint = 0;
+	/* Check if device_type property is set to "pci" or "pci-endpoint".
+	 * Resulting from this setup this PCIe port will be configured
+	 * as root-complex or as endpoint.
+	 */
+	val = of_get_property(port->node, "device_type", NULL);
+	if (!strcmp(val, "pci-endpoint")) {
+		port->endpoint = 1;
+	} else if (!strcmp(val, "pci")) {
+		port->endpoint = 0;
+	} else {
+		printk(KERN_ERR "PCIE: missing or incorrect device_type for %s\n",
+		       np->full_name);
+		return;
+	}
 
 	/* Fetch config space registers address */
 	if (of_address_to_resource(np, 0, &port->cfg_space)) {
-- 
cgit v1.2.3


From 78be76476a34a77f0ea9db2f78ba46a2b0fd5ab5 Mon Sep 17 00:00:00 2001
From: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
Date: Tue, 6 May 2008 12:37:15 -0500
Subject: [POWERPC] 4xx: Fix PCI mem in sequoia DTS

This patch is fixes the sequoia.dts device tree file to use the values defined
in the 440Epx data sheet from AMCC.

That fixes an issue where some devices, including graphics cards, would not
initialize properly because the PCI resource space was not big enough.

Signed-off-by: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
---
 arch/powerpc/boot/dts/sequoia.dts | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/boot/dts/sequoia.dts b/arch/powerpc/boot/dts/sequoia.dts
index a1ae4d6ec99..72d67564bdf 100644
--- a/arch/powerpc/boot/dts/sequoia.dts
+++ b/arch/powerpc/boot/dts/sequoia.dts
@@ -342,9 +342,14 @@
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed. Chip supports a second
 			 * IO range but we don't use it for now
+			 * From the 440EPx user manual:
+			 * PCI 1 Memory     1 8000 0000     1 BFFF FFFF     1GB
+			 * I/O              1 E800 0000     1 E800 FFFF     64KB
+			 * I/O              1 E880 0000     1 EBFF FFFF     56MB
 			 */
-			ranges = <02000000 0 80000000 1 80000000 0 10000000
-				01000000 0 00000000 1 e8000000 0 00100000>;
+			ranges = <02000000 0 80000000 1 80000000 0 40000000
+				01000000 0 00000000 1 e8000000 0 00010000
+				01000000 0 00000000 1 e8800000 0 03800000>;
 
 			/* Inbound 2GB range starting at 0 */
 			dma-ranges = <42000000 0 0 0 0 0 80000000>;
-- 
cgit v1.2.3


From 7a28a1549f9514f3b0dd3dde5c7337ba5d44fba3 Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@lst.de>
Date: Thu, 8 May 2008 15:26:32 +1000
Subject: [POWERPC] spufs: don't requeue victim contex in find_victim if it's
 not in spu_run

We should not requeue the victim context in find_victim if the owner is
not in spu_run. It's first not needed because leaving the context on
the spu is an optimization and second is harmful because it means the
owner could re-enter spu_run when the context is on the runqueue and
trip the BUG_ON in __spu_update_sched_info.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
---
 arch/powerpc/platforms/cell/spufs/sched.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c
index 1df7d6d152c..8a05ac863a2 100644
--- a/arch/powerpc/platforms/cell/spufs/sched.c
+++ b/arch/powerpc/platforms/cell/spufs/sched.c
@@ -659,7 +659,8 @@ static struct spu *find_victim(struct spu_context *ctx)
 
 			victim->stats.invol_ctx_switch++;
 			spu->stats.invol_ctx_switch++;
-			spu_add_to_rq(victim);
+			if (test_bit(SPU_SCHED_SPU_RUN, &ctx->sched_flags))
+				spu_add_to_rq(victim);
 
 			mutex_unlock(&victim->state_mutex);
 
-- 
cgit v1.2.3


From 02539d71fa98d5737bb668b02286c76241e4bac9 Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@lst.de>
Date: Thu, 8 May 2008 15:29:12 +1000
Subject: [POWERPC] spufs: lockdep annotations for spufs_dir_close

We need to acquire the parent i_mutex with I_MUTEX_PARENT to keep
lockdep happy.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
---
 arch/powerpc/platforms/cell/spufs/inode.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/platforms/cell/spufs/inode.c b/arch/powerpc/platforms/cell/spufs/inode.c
index 5faedf5a09a..f407b247185 100644
--- a/arch/powerpc/platforms/cell/spufs/inode.c
+++ b/arch/powerpc/platforms/cell/spufs/inode.c
@@ -224,7 +224,7 @@ static int spufs_dir_close(struct inode *inode, struct file *file)
 	parent = dir->d_parent->d_inode;
 	ctx = SPUFS_I(dir->d_inode)->i_ctx;
 
-	mutex_lock(&parent->i_mutex);
+	mutex_lock_nested(&parent->i_mutex, I_MUTEX_PARENT);
 	ret = spufs_rmdir(parent, dir);
 	mutex_unlock(&parent->i_mutex);
 	WARN_ON(ret);
-- 
cgit v1.2.3


From 76bc080ef5a34aedb63e1691f28c6b42f3468e4e Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Mon, 5 May 2008 15:22:27 +1000
Subject: [POWERPC] Make default cputable entries reflect selected CPU family

Changes the cputable so that various CPU families that have an exclusive
CONFIG_ option have a more sensible default entry to use if the specific
processor hasn't been identified.

This makes the kernel more generally useful when booted on an unknown
PVR for things like new 4xx variants.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 arch/powerpc/kernel/cputable.c | 53 ++++++++++++++++++++++++++++++++++--------
 1 file changed, 43 insertions(+), 10 deletions(-)

diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index 36080d4d192..81738a4b3c3 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -1208,6 +1208,18 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.machine_check		= machine_check_4xx,
 		.platform		= "ppc405",
 	},
+	{	/* default match */
+		.pvr_mask		= 0x00000000,
+		.pvr_value		= 0x00000000,
+		.cpu_name		= "(generic 40x PPC)",
+		.cpu_features		= CPU_FTRS_40X,
+		.cpu_user_features	= PPC_FEATURE_32 |
+			PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+		.machine_check		= machine_check_4xx,
+		.platform		= "ppc405",
+	}
 
 #endif /* CONFIG_40x */
 #ifdef CONFIG_44x
@@ -1421,8 +1433,18 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.machine_check		= machine_check_440A,
 		.platform		= "ppc440",
 	},
+	{	/* default match */
+		.pvr_mask		= 0x00000000,
+		.pvr_value		= 0x00000000,
+		.cpu_name		= "(generic 44x PPC)",
+		.cpu_features		= CPU_FTRS_44X,
+		.cpu_user_features	= COMMON_USER_BOOKE,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+		.machine_check		= machine_check_4xx,
+		.platform		= "ppc440",
+	}
 #endif /* CONFIG_44x */
-#ifdef CONFIG_FSL_BOOKE
 #ifdef CONFIG_E200
 	{	/* e200z5 */
 		.pvr_mask		= 0xfff00000,
@@ -1451,7 +1473,19 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.machine_check		= machine_check_e200,
 		.platform		= "ppc5554",
 	},
-#elif defined(CONFIG_E500)
+	{	/* default match */
+		.pvr_mask		= 0x00000000,
+		.pvr_value		= 0x00000000,
+		.cpu_name		= "(generic E200 PPC)",
+		.cpu_features		= CPU_FTRS_E200,
+		.cpu_user_features	= COMMON_USER_BOOKE |
+			PPC_FEATURE_HAS_EFP_SINGLE |
+			PPC_FEATURE_UNIFIED_CACHE,
+		.dcache_bsize		= 32,
+		.machine_check		= machine_check_e200,
+		.platform		= "ppc5554",
+#endif /* CONFIG_E200 */
+#ifdef CONFIG_E500
 	{	/* e500 */
 		.pvr_mask		= 0xffff0000,
 		.pvr_value		= 0x80200000,
@@ -1487,20 +1521,19 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.machine_check		= machine_check_e500,
 		.platform		= "ppc8548",
 	},
-#endif
-#endif
-#if !CLASSIC_PPC
 	{	/* default match */
 		.pvr_mask		= 0x00000000,
 		.pvr_value		= 0x00000000,
-		.cpu_name		= "(generic PPC)",
-		.cpu_features		= CPU_FTRS_GENERIC_32,
-		.cpu_user_features	= PPC_FEATURE_32,
+		.cpu_name		= "(generic E500 PPC)",
+		.cpu_features		= CPU_FTRS_E500,
+		.cpu_user_features	= COMMON_USER_BOOKE |
+			PPC_FEATURE_HAS_SPE_COMP |
+			PPC_FEATURE_HAS_EFP_SINGLE_COMP,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
+		.machine_check		= machine_check_e500,
 		.platform		= "powerpc",
-	}
-#endif /* !CLASSIC_PPC */
+#endif /* CONFIG_E500 */
 #endif /* CONFIG_PPC32 */
 };
 
-- 
cgit v1.2.3


From 8af302e2dc91d4229968b8eedd4b45c0dd9fc717 Mon Sep 17 00:00:00 2001
From: Jochen Friedrich <jochen@scram.de>
Date: Wed, 7 May 2008 04:40:01 +1000
Subject: [POWERPC] Fix of_i2c include for module compilation

Remove #ifdef CONFIG_OF_I2C as this breaks module compilation.
Drivers using this header should depend on OF_I2C anyways, so
there's no need to make this conditional.

Signed-off-by: Jochen Friedrich <jochen@scram.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 include/linux/of_i2c.h | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/include/linux/of_i2c.h b/include/linux/of_i2c.h
index 2e5a9673204..bd2a870ec29 100644
--- a/include/linux/of_i2c.h
+++ b/include/linux/of_i2c.h
@@ -14,11 +14,7 @@
 
 #include <linux/i2c.h>
 
-#ifdef CONFIG_OF_I2C
-
 void of_register_i2c_devices(struct i2c_adapter *adap,
 			     struct device_node *adap_node);
 
-#endif /* CONFIG_OF_I2C */
-
 #endif /* __LINUX_OF_I2C_H */
-- 
cgit v1.2.3


From 1b70c5a6491dd02263e6d104b72d9b536f987021 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Wed, 7 May 2008 10:00:55 +1000
Subject: [POWERPC] Fix bogus paca->_current initialization

When doing lockdep, I had two patches to initialize paca->_current
early, one bogus, and one correct.  Unfortunately both got merged
as the bad one ended up being part of the main lockdep patch by
mistake.  This causes memory corruption at boot.  This removes
the offending code.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 arch/powerpc/kernel/head_64.S | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index 024805e1747..25e84c0e116 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -1517,10 +1517,6 @@ _INIT_STATIC(start_here_multiplatform)
 	addi	r2,r2,0x4000
 	add	r2,r2,r26
 
-	/* Set initial ptr to current */
-	LOAD_REG_IMMEDIATE(r4, init_task)
-	std	r4,PACACURRENT(r13)
-
 	/* Do very early kernel initializations, including initial hash table,
 	 * stab and slb setup before we turn on relocation.	*/
 
-- 
cgit v1.2.3


From 24d9649574fbe591fdfa6b00893d4096f513e539 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Wed, 7 May 2008 10:00:56 +1000
Subject: [POWERPC] Document when printk is useable

When debugging early boot problems, it's common to sprinkle printk's
all over the place.  However, on 64-bit powerpc, this can lead to
memory corruption if done too early due to the PACA pointer and
lockdep core not being initialized.

This adds some comments to early_setup() that document when it is
safe to do so in order to save time for whoever has to debug that
stuff next.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 arch/powerpc/kernel/setup_64.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 25e3fd8606a..f2cd82eaf49 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -170,6 +170,8 @@ void __init setup_paca(int cpu)
 
 void __init early_setup(unsigned long dt_ptr)
 {
+	/* -------- printk is _NOT_ safe to use here ! ------- */
+
 	/* Fill in any unititialised pacas */
 	initialise_pacas();
 
@@ -185,6 +187,8 @@ void __init early_setup(unsigned long dt_ptr)
 	/* Initialize lockdep early or else spinlocks will blow */
 	lockdep_init();
 
+	/* -------- printk is now safe to use ------- */
+
  	DBG(" -> early_setup(), dt_ptr: 0x%lx\n", dt_ptr);
 
 	/*
-- 
cgit v1.2.3


From f2fd25131b5a9c802faa1de1e9b5f1b06d16eec3 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Wed, 7 May 2008 10:25:34 +1000
Subject: [POWERPC] Initialize lockdep earlier

This moves lockdep_init() to before udbg_early_init() as the later
can call things that acquire spinlocks etc...  This also makes printk
safer to use earlier.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 arch/powerpc/kernel/setup_64.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index f2cd82eaf49..098fd96a394 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -181,14 +181,14 @@ void __init early_setup(unsigned long dt_ptr)
 	/* Assume we're on cpu 0 for now. Don't write to the paca yet! */
 	setup_paca(0);
 
-	/* Enable early debugging if any specified (see udbg.h) */
-	udbg_early_init();
-
 	/* Initialize lockdep early or else spinlocks will blow */
 	lockdep_init();
 
 	/* -------- printk is now safe to use ------- */
 
+	/* Enable early debugging if any specified (see udbg.h) */
+	udbg_early_init();
+
  	DBG(" -> early_setup(), dt_ptr: 0x%lx\n", dt_ptr);
 
 	/*
-- 
cgit v1.2.3


From 1c4a8119123e7e064344588d9a059bc0bb24e1ae Mon Sep 17 00:00:00 2001
From: Huang Weiyi <weiyi.huang@gmail.com>
Date: Thu, 8 May 2008 23:34:29 +1000
Subject: [POWERPC] Remove duplicate #include

Remove duplicate #include of <asm/prom.h> in
arch/powerpc/kernel/btext.c.

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 arch/powerpc/kernel/btext.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/powerpc/kernel/btext.c b/arch/powerpc/kernel/btext.c
index 9f937774549..d8f0329b134 100644
--- a/arch/powerpc/kernel/btext.c
+++ b/arch/powerpc/kernel/btext.c
@@ -16,7 +16,6 @@
 #include <asm/mmu.h>
 #include <asm/pgtable.h>
 #include <asm/io.h>
-#include <asm/prom.h>
 #include <asm/processor.h>
 #include <asm/udbg.h>
 
-- 
cgit v1.2.3


From 53962ecf6ebbdb5b15a8b35fbefe34430eb25609 Mon Sep 17 00:00:00 2001
From: Nate Case <ncase@xes-inc.com>
Date: Fri, 9 May 2008 02:41:17 +1000
Subject: [POWERPC] Remove leftover printk in isa-bridge.c

This printk() appears twice in the same function.  Only the latter one
in the inval_range: section appears to be legitimate.

Signed-off-by: Nate Case <ncase@xes-inc.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 arch/powerpc/kernel/isa-bridge.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/arch/powerpc/kernel/isa-bridge.c b/arch/powerpc/kernel/isa-bridge.c
index 289af348978..4d5731b2429 100644
--- a/arch/powerpc/kernel/isa-bridge.c
+++ b/arch/powerpc/kernel/isa-bridge.c
@@ -108,9 +108,6 @@ static void __devinit pci_process_ISA_OF_ranges(struct device_node *isa_node,
 	if (size > 0x10000)
 		size = 0x10000;
 
-	printk(KERN_ERR "no ISA IO ranges or unexpected isa range, "
-	       "mapping 64k\n");
-
 	__ioremap_at(phb_io_base_phys, (void *)ISA_IO_BASE,
 		     size, _PAGE_NO_CACHE|_PAGE_GUARDED);
 	return;
-- 
cgit v1.2.3