From e0589bf83d9cb9afd87be5c8404381892b6fdc30 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Thu, 5 Nov 2009 23:04:42 +0100 Subject: S3C: Allow to completly disable low-level messages In some cases it is desirable to completly disable low-level messages. For example if you have no uart available for a serial console. With this patch it is possible to disable low-level messages by setting CONFIG_S3C_LOWLEVEL_UART_PORT to less then zero. Signed-off-by: Lars-Peter Clausen --- arch/arm/boot/compressed/head.S | 2 +- arch/arm/plat-s3c/include/plat/uncompress.h | 19 +++++++++++++++---- 2 files changed, 16 insertions(+), 5 deletions(-) diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 4515728c534..858feeacd05 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -58,7 +58,7 @@ add \rb, \rb, #0x00010000 @ Ser1 #endif .endm -#elif defined(CONFIG_ARCH_S3C2410) +#elif defined(CONFIG_ARCH_S3C2410) && CONFIG_S3C_LOWLEVEL_UART_PORT >= 0 .macro loadsp, rb mov \rb, #0x50000000 add \rb, \rb, #0x4000 * CONFIG_S3C_LOWLEVEL_UART_PORT diff --git a/arch/arm/plat-s3c/include/plat/uncompress.h b/arch/arm/plat-s3c/include/plat/uncompress.h index dc66a477f62..8e02073e307 100644 --- a/arch/arm/plat-s3c/include/plat/uncompress.h +++ b/arch/arm/plat-s3c/include/plat/uncompress.h @@ -37,6 +37,8 @@ static void arch_detect_cpu(void); /* how many bytes we allow into the FIFO at a time in FIFO mode */ #define FIFO_MAX (14) +#if CONFIG_S3C_LOWLEVEL_UART_PORT >= 0 + #define uart_base S3C_PA_UART + (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT) static __inline__ void @@ -86,10 +88,6 @@ static void putc(int ch) uart_wr(S3C2410_UTXH, ch); } -static inline void flush(void) -{ -} - #define __raw_writel(d, ad) \ do { \ *((volatile unsigned int __force *)(ad)) = (d); \ @@ -163,6 +161,19 @@ static inline void arch_enable_uart_fifo(void) #define arch_enable_uart_fifo() do { } while(0) #endif +#else +static inline void putc(int ch) +{ +} + +#define arch_enable_uart_fifo() do { } while(0) +#define arch_decomp_wdog_start() +#define arch_decomp_wdog() +#endif + +static inline void flush(void) +{ +} static void arch_decomp_setup(void) -- cgit v1.2.3