From d9e2d185bf01e20339158f77c3fca00b02014912 Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Wed, 30 Nov 2005 22:30:23 +0100 Subject: b44: missing netif_wake_queue() in b44_open() This patch fixes a problem plaguing Dell notebooks with built-in b44 ethernet: The driver refuses to transmit packets of any kind until after the first 5-second tx_timeout occurs. This bug causes DHCP negotiation to fail (timeout) during installation of Ubuntu Linux. Signed-off-by: Mark Lord Signed-off-by: Andrew Morton --- drivers/net/b44.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/b44.c b/drivers/net/b44.c index c53848f787e..c8d9b4d6670 100644 --- a/drivers/net/b44.c +++ b/drivers/net/b44.c @@ -1417,6 +1417,7 @@ static int b44_open(struct net_device *dev) add_timer(&bp->timer); b44_enable_ints(bp); + netif_start_queue(dev); out: return err; } @@ -2113,6 +2114,7 @@ static int b44_resume(struct pci_dev *pdev) add_timer(&bp->timer); b44_enable_ints(bp); + netif_wake_queue(dev); return 0; } -- cgit v1.2.3 From 3410572d519b6c68505f746f25033de97809eaa1 Mon Sep 17 00:00:00 2001 From: Francois Romieu Date: Wed, 30 Nov 2005 22:32:13 +0100 Subject: b44: early return in dev->do_ioctl when the device is not up The device has not gone through a whole reset/init sequence until the device is up. Accessing the mii interface before this point is not safe. Signed-off-by: Francois Romieu --- drivers/net/b44.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/net/b44.c b/drivers/net/b44.c index c8d9b4d6670..e0ec777d96d 100644 --- a/drivers/net/b44.c +++ b/drivers/net/b44.c @@ -1838,12 +1838,15 @@ static int b44_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) { struct mii_ioctl_data *data = if_mii(ifr); struct b44 *bp = netdev_priv(dev); - int err; + int err = -EINVAL; + + if (!netif_running(dev)) + goto out; spin_lock_irq(&bp->lock); err = generic_mii_ioctl(&bp->mii_if, data, cmd, NULL); spin_unlock_irq(&bp->lock); - +out: return err; } -- cgit v1.2.3 From 981d9c176dacf397d267215d44a4060c28663480 Mon Sep 17 00:00:00 2001 From: Francois Romieu Date: Wed, 30 Nov 2005 22:35:39 +0100 Subject: b44: increase version number Signed-off-by: Francois Romieu --- drivers/net/b44.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/b44.c b/drivers/net/b44.c index e0ec777d96d..7aa49b974dc 100644 --- a/drivers/net/b44.c +++ b/drivers/net/b44.c @@ -28,8 +28,8 @@ #define DRV_MODULE_NAME "b44" #define PFX DRV_MODULE_NAME ": " -#define DRV_MODULE_VERSION "0.96" -#define DRV_MODULE_RELDATE "Nov 8, 2005" +#define DRV_MODULE_VERSION "0.97" +#define DRV_MODULE_RELDATE "Nov 30, 2005" #define B44_DEF_MSG_ENABLE \ (NETIF_MSG_DRV | \ -- cgit v1.2.3 From a174fd88d2b73c1933ea24ed533354d618c7d089 Mon Sep 17 00:00:00 2001 From: Jesse Brandeburg Date: Tue, 29 Nov 2005 19:23:59 -0800 Subject: [PATCH] e1000: fix for dhcp issue Parse outgoing packets in e1000_transfer_dhcp_info as raw packet even if protocol bits are set. pump, for instance causes kernel panic on some systems, if parsed via udp header. Thanks to Derrell Lipman for reporting and testing. Signed-off-by: Jesse Brandeburg Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/e1000/e1000_main.c | 14 +------------- 1 file changed, 1 insertion(+), 13 deletions(-) diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 8b207f0e139..e0ae248b431 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -2621,19 +2621,7 @@ e1000_transfer_dhcp_info(struct e1000_adapter *adapter, struct sk_buff *skb) E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT)) ) return 0; } - if(htons(ETH_P_IP) == skb->protocol) { - const struct iphdr *ip = skb->nh.iph; - if(IPPROTO_UDP == ip->protocol) { - struct udphdr *udp = (struct udphdr *)(skb->h.uh); - if(ntohs(udp->dest) == 67) { - offset = (uint8_t *)udp + 8 - skb->data; - length = skb->len - offset; - - return e1000_mng_write_dhcp_info(hw, - (uint8_t *)udp + 8, length); - } - } - } else if((skb->len > MINIMUM_DHCP_PACKET_SIZE) && (!skb->protocol)) { + if ((skb->len > MINIMUM_DHCP_PACKET_SIZE) && (!skb->protocol)) { struct ethhdr *eth = (struct ethhdr *) skb->data; if((htons(ETH_P_IP) == eth->h_proto)) { const struct iphdr *ip = -- cgit v1.2.3 From 596f86a8d8a70005728944143f08fe5414443355 Mon Sep 17 00:00:00 2001 From: "shemminger@osdl.org" Date: Wed, 23 Nov 2005 22:00:49 -0800 Subject: [PATCH] sk98lin: fix checksumming code Remove code from sk98lin that does it's own checksum validation. This code is incorrect when dealing with nested protocols like VLAN's, and it is better to use regular receive code path to handle hardware checksum. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sk98lin/Makefile | 5 +- drivers/net/sk98lin/h/skdrv2nd.h | 4 - drivers/net/sk98lin/skcsum.c | 871 --------------------------------------- drivers/net/sk98lin/skge.c | 165 ++------ 4 files changed, 38 insertions(+), 1007 deletions(-) delete mode 100644 drivers/net/sk98lin/skcsum.c diff --git a/drivers/net/sk98lin/Makefile b/drivers/net/sk98lin/Makefile index 6783039ffb7..7653d6e33aa 100644 --- a/drivers/net/sk98lin/Makefile +++ b/drivers/net/sk98lin/Makefile @@ -27,8 +27,7 @@ sk98lin-objs := \ sktimer.o \ skvpd.o \ skxmac2.o \ - skproc.o \ - skcsum.o + skproc.o # DBGDEF = \ # -DDEBUG @@ -77,7 +76,7 @@ endif # SK_DBGCAT_DRV_INT_SRC 0x04000000 interrupts sources # SK_DBGCAT_DRV_EVENT 0x08000000 driver events -EXTRA_CFLAGS += -Idrivers/net/sk98lin -DSK_DIAG_SUPPORT -DSK_USE_CSUM -DGENESIS -DYUKON $(DBGDEF) $(SKPARAM) +EXTRA_CFLAGS += -Idrivers/net/sk98lin -DSK_DIAG_SUPPORT -DGENESIS -DYUKON $(DBGDEF) $(SKPARAM) clean: rm -f core *.o *.a *.s diff --git a/drivers/net/sk98lin/h/skdrv2nd.h b/drivers/net/sk98lin/h/skdrv2nd.h index 542cec57f86..2dc5728e3ef 100644 --- a/drivers/net/sk98lin/h/skdrv2nd.h +++ b/drivers/net/sk98lin/h/skdrv2nd.h @@ -425,10 +425,6 @@ struct s_AC { TX_PORT TxPort[SK_MAX_MACS][2]; RX_PORT RxPort[SK_MAX_MACS]; - unsigned int CsOfs1; /* for checksum calculation */ - unsigned int CsOfs2; /* for checksum calculation */ - SK_U32 CsOfs; /* for checksum calculation */ - SK_BOOL CheckQueue; /* check event queue soon */ SK_TIMER DrvCleanupTimer;/* to check for pending descriptors */ DIM_INFO DynIrqModInfo; /* all data related to DIM */ diff --git a/drivers/net/sk98lin/skcsum.c b/drivers/net/sk98lin/skcsum.c deleted file mode 100644 index 38a6e7a631f..00000000000 --- a/drivers/net/sk98lin/skcsum.c +++ /dev/null @@ -1,871 +0,0 @@ -/****************************************************************************** - * - * Name: skcsum.c - * Project: GEnesis, PCI Gigabit Ethernet Adapter - * Version: $Revision: 1.12 $ - * Date: $Date: 2003/08/20 13:55:53 $ - * Purpose: Store/verify Internet checksum in send/receive packets. - * - ******************************************************************************/ - -/****************************************************************************** - * - * (C)Copyright 1998-2003 SysKonnect GmbH. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * The information in this file is provided "AS IS" without warranty. - * - ******************************************************************************/ - -#ifdef SK_USE_CSUM /* Check if CSUM is to be used. */ - -#ifndef lint -static const char SysKonnectFileId[] = - "@(#) $Id: skcsum.c,v 1.12 2003/08/20 13:55:53 mschmid Exp $ (C) SysKonnect."; -#endif /* !lint */ - -/****************************************************************************** - * - * Description: - * - * This is the "GEnesis" common module "CSUM". - * - * This module contains the code necessary to calculate, store, and verify the - * Internet Checksum of IP, TCP, and UDP frames. - * - * "GEnesis" is an abbreviation of "Gigabit Ethernet Network System in Silicon" - * and is the code name of this SysKonnect project. - * - * Compilation Options: - * - * SK_USE_CSUM - Define if CSUM is to be used. Otherwise, CSUM will be an - * empty module. - * - * SKCS_OVERWRITE_PROTO - Define to overwrite the default protocol id - * definitions. In this case, all SKCS_PROTO_xxx definitions must be made - * external. - * - * SKCS_OVERWRITE_STATUS - Define to overwrite the default return status - * definitions. In this case, all SKCS_STATUS_xxx definitions must be made - * external. - * - * Include File Hierarchy: - * - * "h/skdrv1st.h" - * "h/skcsum.h" - * "h/sktypes.h" - * "h/skqueue.h" - * "h/skdrv2nd.h" - * - ******************************************************************************/ - -#include "h/skdrv1st.h" -#include "h/skcsum.h" -#include "h/skdrv2nd.h" - -/* defines ********************************************************************/ - -/* The size of an Ethernet MAC header. */ -#define SKCS_ETHERNET_MAC_HEADER_SIZE (6+6+2) - -/* The size of the used topology's MAC header. */ -#define SKCS_MAC_HEADER_SIZE SKCS_ETHERNET_MAC_HEADER_SIZE - -/* The size of the IP header without any option fields. */ -#define SKCS_IP_HEADER_SIZE 20 - -/* - * Field offsets within the IP header. - */ - -/* "Internet Header Version" and "Length". */ -#define SKCS_OFS_IP_HEADER_VERSION_AND_LENGTH 0 - -/* "Total Length". */ -#define SKCS_OFS_IP_TOTAL_LENGTH 2 - -/* "Flags" "Fragment Offset". */ -#define SKCS_OFS_IP_FLAGS_AND_FRAGMENT_OFFSET 6 - -/* "Next Level Protocol" identifier. */ -#define SKCS_OFS_IP_NEXT_LEVEL_PROTOCOL 9 - -/* Source IP address. */ -#define SKCS_OFS_IP_SOURCE_ADDRESS 12 - -/* Destination IP address. */ -#define SKCS_OFS_IP_DESTINATION_ADDRESS 16 - - -/* - * Field offsets within the UDP header. - */ - -/* UDP checksum. */ -#define SKCS_OFS_UDP_CHECKSUM 6 - -/* IP "Next Level Protocol" identifiers (see RFC 790). */ -#define SKCS_PROTO_ID_TCP 6 /* Transport Control Protocol */ -#define SKCS_PROTO_ID_UDP 17 /* User Datagram Protocol */ - -/* IP "Don't Fragment" bit. */ -#define SKCS_IP_DONT_FRAGMENT SKCS_HTON16(0x4000) - -/* Add a byte offset to a pointer. */ -#define SKCS_IDX(pPtr, Ofs) ((void *) ((char *) (pPtr) + (Ofs))) - -/* - * Macros that convert host to network representation and vice versa, i.e. - * little/big endian conversion on little endian machines only. - */ -#ifdef SK_LITTLE_ENDIAN -#define SKCS_HTON16(Val16) (((unsigned) (Val16) >> 8) | (((Val16) & 0xff) << 8)) -#endif /* SK_LITTLE_ENDIAN */ -#ifdef SK_BIG_ENDIAN -#define SKCS_HTON16(Val16) (Val16) -#endif /* SK_BIG_ENDIAN */ -#define SKCS_NTOH16(Val16) SKCS_HTON16(Val16) - -/* typedefs *******************************************************************/ - -/* function prototypes ********************************************************/ - -/****************************************************************************** - * - * SkCsGetSendInfo - get checksum information for a send packet - * - * Description: - * Get all checksum information necessary to send a TCP or UDP packet. The - * function checks the IP header passed to it. If the high-level protocol - * is either TCP or UDP the pseudo header checksum is calculated and - * returned. - * - * The function returns the total length of the IP header (including any - * IP option fields), which is the same as the start offset of the IP data - * which in turn is the start offset of the TCP or UDP header. - * - * The function also returns the TCP or UDP pseudo header checksum, which - * should be used as the start value for the hardware checksum calculation. - * (Note that any actual pseudo header checksum can never calculate to - * zero.) - * - * Note: - * There is a bug in the GENESIS ASIC which may lead to wrong checksums. - * - * Arguments: - * pAc - A pointer to the adapter context struct. - * - * pIpHeader - Pointer to IP header. Must be at least the IP header *not* - * including any option fields, i.e. at least 20 bytes. - * - * Note: This pointer will be used to address 8-, 16-, and 32-bit - * variables with the respective alignment offsets relative to the pointer. - * Thus, the pointer should point to a 32-bit aligned address. If the - * target system cannot address 32-bit variables on non 32-bit aligned - * addresses, then the pointer *must* point to a 32-bit aligned address. - * - * pPacketInfo - A pointer to the packet information structure for this - * packet. Before calling this SkCsGetSendInfo(), the following field must - * be initialized: - * - * ProtocolFlags - Initialize with any combination of - * SKCS_PROTO_XXX bit flags. SkCsGetSendInfo() will only work on - * the protocols specified here. Any protocol(s) not specified - * here will be ignored. - * - * Note: Only one checksum can be calculated in hardware. Thus, if - * SKCS_PROTO_IP is specified in the 'ProtocolFlags', - * SkCsGetSendInfo() must calculate the IP header checksum in - * software. It might be a better idea to have the calling - * protocol stack calculate the IP header checksum. - * - * Returns: N/A - * On return, the following fields in 'pPacketInfo' may or may not have - * been filled with information, depending on the protocol(s) found in the - * packet: - * - * ProtocolFlags - Returns the SKCS_PROTO_XXX bit flags of the protocol(s) - * that were both requested by the caller and actually found in the packet. - * Protocol(s) not specified by the caller and/or not found in the packet - * will have their respective SKCS_PROTO_XXX bit flags reset. - * - * Note: For IP fragments, TCP and UDP packet information is ignored. - * - * IpHeaderLength - The total length in bytes of the complete IP header - * including any option fields is returned here. This is the start offset - * of the IP data, i.e. the TCP or UDP header if present. - * - * IpHeaderChecksum - If IP has been specified in the 'ProtocolFlags', the - * 16-bit Internet Checksum of the IP header is returned here. This value - * is to be stored into the packet's 'IP Header Checksum' field. - * - * PseudoHeaderChecksum - If this is a TCP or UDP packet and if TCP or UDP - * has been specified in the 'ProtocolFlags', the 16-bit Internet Checksum - * of the TCP or UDP pseudo header is returned here. - */ -void SkCsGetSendInfo( -SK_AC *pAc, /* Adapter context struct. */ -void *pIpHeader, /* IP header. */ -SKCS_PACKET_INFO *pPacketInfo, /* Packet information struct. */ -int NetNumber) /* Net number */ -{ - /* Internet Header Version found in IP header. */ - unsigned InternetHeaderVersion; - - /* Length of the IP header as found in IP header. */ - unsigned IpHeaderLength; - - /* Bit field specifiying the desired/found protocols. */ - unsigned ProtocolFlags; - - /* Next level protocol identifier found in IP header. */ - unsigned NextLevelProtocol; - - /* Length of IP data portion. */ - unsigned IpDataLength; - - /* TCP/UDP pseudo header checksum. */ - unsigned long PseudoHeaderChecksum; - - /* Pointer to next level protocol statistics structure. */ - SKCS_PROTO_STATS *NextLevelProtoStats; - - /* Temporary variable. */ - unsigned Tmp; - - Tmp = *(SK_U8 *) - SKCS_IDX(pIpHeader, SKCS_OFS_IP_HEADER_VERSION_AND_LENGTH); - - /* Get the Internet Header Version (IHV). */ - /* Note: The IHV is stored in the upper four bits. */ - - InternetHeaderVersion = Tmp >> 4; - - /* Check the Internet Header Version. */ - /* Note: We currently only support IP version 4. */ - - if (InternetHeaderVersion != 4) { /* IPv4? */ - SK_DBG_MSG(pAc, SK_DBGMOD_CSUM, SK_DBGCAT_ERR | SK_DBGCAT_TX, - ("Tx: Unknown Internet Header Version %u.\n", - InternetHeaderVersion)); - pPacketInfo->ProtocolFlags = 0; - pAc->Csum.ProtoStats[NetNumber][SKCS_PROTO_STATS_IP].TxUnableCts++; - return; - } - - /* Get the IP header length (IHL). */ - /* - * Note: The IHL is stored in the lower four bits as the number of - * 4-byte words. - */ - - IpHeaderLength = (Tmp & 0xf) * 4; - pPacketInfo->IpHeaderLength = IpHeaderLength; - - /* Check the IP header length. */ - - /* 04-Aug-1998 sw - Really check the IHL? Necessary? */ - - if (IpHeaderLength < 5*4) { - SK_DBG_MSG(pAc, SK_DBGMOD_CSUM, SK_DBGCAT_ERR | SK_DBGCAT_TX, - ("Tx: Invalid IP Header Length %u.\n", IpHeaderLength)); - pPacketInfo->ProtocolFlags = 0; - pAc->Csum.ProtoStats[NetNumber][SKCS_PROTO_STATS_IP].TxUnableCts++; - return; - } - - /* This is an IPv4 frame with a header of valid length. */ - - pAc->Csum.ProtoStats[NetNumber][SKCS_PROTO_STATS_IP].TxOkCts++; - - /* Check if we should calculate the IP header checksum. */ - - ProtocolFlags = pPacketInfo->ProtocolFlags; - - if (ProtocolFlags & SKCS_PROTO_IP) { - pPacketInfo->IpHeaderChecksum = - SkCsCalculateChecksum(pIpHeader, IpHeaderLength); - } - - /* Get the next level protocol identifier. */ - - NextLevelProtocol = - *(SK_U8 *) SKCS_IDX(pIpHeader, SKCS_OFS_IP_NEXT_LEVEL_PROTOCOL); - - /* - * Check if this is a TCP or UDP frame and if we should calculate the - * TCP/UDP pseudo header checksum. - * - * Also clear all protocol bit flags of protocols not present in the - * frame. - */ - - if ((ProtocolFlags & SKCS_PROTO_TCP) != 0 && - NextLevelProtocol == SKCS_PROTO_ID_TCP) { - /* TCP/IP frame. */ - ProtocolFlags &= SKCS_PROTO_TCP | SKCS_PROTO_IP; - NextLevelProtoStats = - &pAc->Csum.ProtoStats[NetNumber][SKCS_PROTO_STATS_TCP]; - } - else if ((ProtocolFlags & SKCS_PROTO_UDP) != 0 && - NextLevelProtocol == SKCS_PROTO_ID_UDP) { - /* UDP/IP frame. */ - ProtocolFlags &= SKCS_PROTO_UDP | SKCS_PROTO_IP; - NextLevelProtoStats = - &pAc->Csum.ProtoStats[NetNumber][SKCS_PROTO_STATS_UDP]; - } - else { - /* - * Either not a TCP or UDP frame and/or TCP/UDP processing not - * specified. - */ - pPacketInfo->ProtocolFlags = ProtocolFlags & SKCS_PROTO_IP; - return; - } - - /* Check if this is an IP fragment. */ - - /* - * Note: An IP fragment has a non-zero "Fragment Offset" field and/or - * the "More Fragments" bit set. Thus, if both the "Fragment Offset" - * and the "More Fragments" are zero, it is *not* a fragment. We can - * easily check both at the same time since they are in the same 16-bit - * word. - */ - - if ((*(SK_U16 *) - SKCS_IDX(pIpHeader, SKCS_OFS_IP_FLAGS_AND_FRAGMENT_OFFSET) & - ~SKCS_IP_DONT_FRAGMENT) != 0) { - /* IP fragment; ignore all other protocols. */ - pPacketInfo->ProtocolFlags = ProtocolFlags & SKCS_PROTO_IP; - NextLevelProtoStats->TxUnableCts++; - return; - } - - /* - * Calculate the TCP/UDP pseudo header checksum. - */ - - /* Get total length of IP header and data. */ - - IpDataLength = - *(SK_U16 *) SKCS_IDX(pIpHeader, SKCS_OFS_IP_TOTAL_LENGTH); - - /* Get length of IP data portion. */ - - IpDataLength = SKCS_NTOH16(IpDataLength) - IpHeaderLength; - - /* Calculate the sum of all pseudo header fields (16-bit). */ - - PseudoHeaderChecksum = - (unsigned long) *(SK_U16 *) SKCS_IDX(pIpHeader, - SKCS_OFS_IP_SOURCE_ADDRESS + 0) + - (unsigned long) *(SK_U16 *) SKCS_IDX(pIpHeader, - SKCS_OFS_IP_SOURCE_ADDRESS + 2) + - (unsigned long) *(SK_U16 *) SKCS_IDX(pIpHeader, - SKCS_OFS_IP_DESTINATION_ADDRESS + 0) + - (unsigned long) *(SK_U16 *) SKCS_IDX(pIpHeader, - SKCS_OFS_IP_DESTINATION_ADDRESS + 2) + - (unsigned long) SKCS_HTON16(NextLevelProtocol) + - (unsigned long) SKCS_HTON16(IpDataLength); - - /* Add-in any carries. */ - - SKCS_OC_ADD(PseudoHeaderChecksum, PseudoHeaderChecksum, 0); - - /* Add-in any new carry. */ - - SKCS_OC_ADD(pPacketInfo->PseudoHeaderChecksum, PseudoHeaderChecksum, 0); - - pPacketInfo->ProtocolFlags = ProtocolFlags; - NextLevelProtoStats->TxOkCts++; /* Success. */ -} /* SkCsGetSendInfo */ - - -/****************************************************************************** - * - * SkCsGetReceiveInfo - verify checksum information for a received packet - * - * Description: - * Verify a received frame's checksum. The function returns a status code - * reflecting the result of the verification. - * - * Note: - * Before calling this function you have to verify that the frame is - * not padded and Checksum1 and Checksum2 are bigger than 1. - * - * Arguments: - * pAc - Pointer to adapter context struct. - * - * pIpHeader - Pointer to IP header. Must be at least the length in bytes - * of the received IP header including any option fields. For UDP packets, - * 8 additional bytes are needed to access the UDP checksum. - * - * Note: The actual length of the IP header is stored in the lower four - * bits of the first octet of the IP header as the number of 4-byte words, - * so it must be multiplied by four to get the length in bytes. Thus, the - * maximum IP header length is 15 * 4 = 60 bytes. - * - * Checksum1 - The first 16-bit Internet Checksum calculated by the - * hardware starting at the offset returned by SkCsSetReceiveFlags(). - * - * Checksum2 - The second 16-bit Internet Checksum calculated by the - * hardware starting at the offset returned by SkCsSetReceiveFlags(). - * - * Returns: - * SKCS_STATUS_UNKNOWN_IP_VERSION - Not an IP v4 frame. - * SKCS_STATUS_IP_CSUM_ERROR - IP checksum error. - * SKCS_STATUS_IP_CSUM_ERROR_TCP - IP checksum error in TCP frame. - * SKCS_STATUS_IP_CSUM_ERROR_UDP - IP checksum error in UDP frame - * SKCS_STATUS_IP_FRAGMENT - IP fragment (IP checksum ok). - * SKCS_STATUS_IP_CSUM_OK - IP checksum ok (not a TCP or UDP frame). - * SKCS_STATUS_TCP_CSUM_ERROR - TCP checksum error (IP checksum ok). - * SKCS_STATUS_UDP_CSUM_ERROR - UDP checksum error (IP checksum ok). - * SKCS_STATUS_TCP_CSUM_OK - IP and TCP checksum ok. - * SKCS_STATUS_UDP_CSUM_OK - IP and UDP checksum ok. - * SKCS_STATUS_IP_CSUM_OK_NO_UDP - IP checksum OK and no UDP checksum. - * - * Note: If SKCS_OVERWRITE_STATUS is defined, the SKCS_STATUS_XXX values - * returned here can be defined in some header file by the module using CSUM. - * In this way, the calling module can assign return values for its own needs, - * e.g. by assigning bit flags to the individual protocols. - */ -SKCS_STATUS SkCsGetReceiveInfo( -SK_AC *pAc, /* Adapter context struct. */ -void *pIpHeader, /* IP header. */ -unsigned Checksum1, /* Hardware checksum 1. */ -unsigned Checksum2, /* Hardware checksum 2. */ -int NetNumber) /* Net number */ -{ - /* Internet Header Version found in IP header. */ - unsigned InternetHeaderVersion; - - /* Length of the IP header as found in IP header. */ - unsigned IpHeaderLength; - - /* Length of IP data portion. */ - unsigned IpDataLength; - - /* IP header checksum. */ - unsigned IpHeaderChecksum; - - /* IP header options checksum, if any. */ - unsigned IpOptionsChecksum; - - /* IP data checksum, i.e. TCP/UDP checksum. */ - unsigned IpDataChecksum; - - /* Next level protocol identifier found in IP header. */ - unsigned NextLevelProtocol; - - /* The checksum of the "next level protocol", i.e. TCP or UDP. */ - unsigned long NextLevelProtocolChecksum; - - /* Pointer to next level protocol statistics structure. */ - SKCS_PROTO_STATS *NextLevelProtoStats; - - /* Temporary variable. */ - unsigned Tmp; - - Tmp = *(SK_U8 *) - SKCS_IDX(pIpHeader, SKCS_OFS_IP_HEADER_VERSION_AND_LENGTH); - - /* Get the Internet Header Version (IHV). */ - /* Note: The IHV is stored in the upper four bits. */ - - InternetHeaderVersion = Tmp >> 4; - - /* Check the Internet Header Version. */ - /* Note: We currently only support IP version 4. */ - - if (InternetHeaderVersion != 4) { /* IPv4? */ - SK_DBG_MSG(pAc, SK_DBGMOD_CSUM, SK_DBGCAT_ERR | SK_DBGCAT_RX, - ("Rx: Unknown Internet Header Version %u.\n", - InternetHeaderVersion)); - pAc->Csum.ProtoStats[NetNumber][SKCS_PROTO_STATS_IP].RxUnableCts++; - return (SKCS_STATUS_UNKNOWN_IP_VERSION); - } - - /* Get the IP header length (IHL). */ - /* - * Note: The IHL is stored in the lower four bits as the number of - * 4-byte words. - */ - - IpHeaderLength = (Tmp & 0xf) * 4; - - /* Check the IP header length. */ - - /* 04-Aug-1998 sw - Really check the IHL? Necessary? */ - - if (IpHeaderLength < 5*4) { - SK_DBG_MSG(pAc, SK_DBGMOD_CSUM, SK_DBGCAT_ERR | SK_DBGCAT_RX, - ("Rx: Invalid IP Header Length %u.\n", IpHeaderLength)); - pAc->Csum.ProtoStats[NetNumber][SKCS_PROTO_STATS_IP].RxErrCts++; - return (SKCS_STATUS_IP_CSUM_ERROR); - } - - /* This is an IPv4 frame with a header of valid length. */ - - /* Get the IP header and data checksum. */ - - IpDataChecksum = Checksum2; - - /* - * The IP header checksum is calculated as follows: - * - * IpHeaderChecksum = Checksum1 - Checksum2 - */ - - SKCS_OC_SUB(IpHeaderChecksum, Checksum1, Checksum2); - - /* Check if any IP header options. */ - - if (IpHeaderLength > SKCS_IP_HEADER_SIZE) { - - /* Get the IP options checksum. */ - - IpOptionsChecksum = SkCsCalculateChecksum( - SKCS_IDX(pIpHeader, SKCS_IP_HEADER_SIZE), - IpHeaderLength - SKCS_IP_HEADER_SIZE); - - /* Adjust the IP header and IP data checksums. */ - - SKCS_OC_ADD(IpHeaderChecksum, IpHeaderChecksum, IpOptionsChecksum); - - SKCS_OC_SUB(IpDataChecksum, IpDataChecksum, IpOptionsChecksum); - } - - /* - * Check if the IP header checksum is ok. - * - * NOTE: We must check the IP header checksum even if the caller just wants - * us to check upper-layer checksums, because we cannot do any further - * processing of the packet without a valid IP checksum. - */ - - /* Get the next level protocol identifier. */ - - NextLevelProtocol = *(SK_U8 *) - SKCS_IDX(pIpHeader, SKCS_OFS_IP_NEXT_LEVEL_PROTOCOL); - - if (IpHeaderChecksum != 0xffff) { - pAc->Csum.ProtoStats[NetNumber][SKCS_PROTO_STATS_IP].RxErrCts++; - /* the NDIS tester wants to know the upper level protocol too */ - if (NextLevelProtocol == SKCS_PROTO_ID_TCP) { - return(SKCS_STATUS_IP_CSUM_ERROR_TCP); - } - else if (NextLevelProtocol == SKCS_PROTO_ID_UDP) { - return(SKCS_STATUS_IP_CSUM_ERROR_UDP); - } - return (SKCS_STATUS_IP_CSUM_ERROR); - } - - /* - * Check if this is a TCP or UDP frame and if we should calculate the - * TCP/UDP pseudo header checksum. - * - * Also clear all protocol bit flags of protocols not present in the - * frame. - */ - - if ((pAc->Csum.ReceiveFlags[NetNumber] & SKCS_PROTO_TCP) != 0 && - NextLevelProtocol == SKCS_PROTO_ID_TCP) { - /* TCP/IP frame. */ - NextLevelProtoStats = - &pAc->Csum.ProtoStats[NetNumber][SKCS_PROTO_STATS_TCP]; - } - else if ((pAc->Csum.ReceiveFlags[NetNumber] & SKCS_PROTO_UDP) != 0 && - NextLevelProtocol == SKCS_PROTO_ID_UDP) { - /* UDP/IP frame. */ - NextLevelProtoStats = - &pAc->Csum.ProtoStats[NetNumber][SKCS_PROTO_STATS_UDP]; - } - else { - /* - * Either not a TCP or UDP frame and/or TCP/UDP processing not - * specified. - */ - return (SKCS_STATUS_IP_CSUM_OK); - } - - /* Check if this is an IP fragment. */ - - /* - * Note: An IP fragment has a non-zero "Fragment Offset" field and/or - * the "More Fragments" bit set. Thus, if both the "Fragment Offset" - * and the "More Fragments" are zero, it is *not* a fragment. We can - * easily check both at the same time since they are in the same 16-bit - * word. - */ - - if ((*(SK_U16 *) - SKCS_IDX(pIpHeader, SKCS_OFS_IP_FLAGS_AND_FRAGMENT_OFFSET) & - ~SKCS_IP_DONT_FRAGMENT) != 0) { - /* IP fragment; ignore all other protocols. */ - NextLevelProtoStats->RxUnableCts++; - return (SKCS_STATUS_IP_FRAGMENT); - } - - /* - * 08-May-2000 ra - * - * From RFC 768 (UDP) - * If the computed checksum is zero, it is transmitted as all ones (the - * equivalent in one's complement arithmetic). An all zero transmitted - * checksum value means that the transmitter generated no checksum (for - * debugging or for higher level protocols that don't care). - */ - - if (NextLevelProtocol == SKCS_PROTO_ID_UDP && - *(SK_U16*)SKCS_IDX(pIpHeader, IpHeaderLength + 6) == 0x0000) { - - NextLevelProtoStats->RxOkCts++; - - return (SKCS_STATUS_IP_CSUM_OK_NO_UDP); - } - - /* - * Calculate the TCP/UDP checksum. - */ - - /* Get total length of IP header and data. */ - - IpDataLength = - *(SK_U16 *) SKCS_IDX(pIpHeader, SKCS_OFS_IP_TOTAL_LENGTH); - - /* Get length of IP data portion. */ - - IpDataLength = SKCS_NTOH16(IpDataLength) - IpHeaderLength; - - NextLevelProtocolChecksum = - - /* Calculate the pseudo header checksum. */ - - (unsigned long) *(SK_U16 *) SKCS_IDX(pIpHeader, - SKCS_OFS_IP_SOURCE_ADDRESS + 0) + - (unsigned long) *(SK_U16 *) SKCS_IDX(pIpHeader, - SKCS_OFS_IP_SOURCE_ADDRESS + 2) + - (unsigned long) *(SK_U16 *) SKCS_IDX(pIpHeader, - SKCS_OFS_IP_DESTINATION_ADDRESS + 0) + - (unsigned long) *(SK_U16 *) SKCS_IDX(pIpHeader, - SKCS_OFS_IP_DESTINATION_ADDRESS + 2) + - (unsigned long) SKCS_HTON16(NextLevelProtocol) + - (unsigned long) SKCS_HTON16(IpDataLength) + - - /* Add the TCP/UDP header checksum. */ - - (unsigned long) IpDataChecksum; - - /* Add-in any carries. */ - - SKCS_OC_ADD(NextLevelProtocolChecksum, NextLevelProtocolChecksum, 0); - - /* Add-in any new carry. */ - - SKCS_OC_ADD(NextLevelProtocolChecksum, NextLevelProtocolChecksum, 0); - - /* Check if the TCP/UDP checksum is ok. */ - - if ((unsigned) NextLevelProtocolChecksum == 0xffff) { - - /* TCP/UDP checksum ok. */ - - NextLevelProtoStats->RxOkCts++; - - return (NextLevelProtocol == SKCS_PROTO_ID_TCP ? - SKCS_STATUS_TCP_CSUM_OK : SKCS_STATUS_UDP_CSUM_OK); - } - - /* TCP/UDP checksum error. */ - - NextLevelProtoStats->RxErrCts++; - - return (NextLevelProtocol == SKCS_PROTO_ID_TCP ? - SKCS_STATUS_TCP_CSUM_ERROR : SKCS_STATUS_UDP_CSUM_ERROR); -} /* SkCsGetReceiveInfo */ - - -/****************************************************************************** - * - * SkCsSetReceiveFlags - set checksum receive flags - * - * Description: - * Use this function to set the various receive flags. According to the - * protocol flags set by the caller, the start offsets within received - * packets of the two hardware checksums are returned. These offsets must - * be stored in all receive descriptors. - * - * Arguments: - * pAc - Pointer to adapter context struct. - * - * ReceiveFlags - Any combination of SK_PROTO_XXX flags of the protocols - * for which the caller wants checksum information on received frames. - * - * pChecksum1Offset - The start offset of the first receive descriptor - * hardware checksum to be calculated for received frames is returned - * here. - * - * pChecksum2Offset - The start offset of the second receive descriptor - * hardware checksum to be calculated for received frames is returned - * here. - * - * Returns: N/A - * Returns the two hardware checksum start offsets. - */ -void SkCsSetReceiveFlags( -SK_AC *pAc, /* Adapter context struct. */ -unsigned ReceiveFlags, /* New receive flags. */ -unsigned *pChecksum1Offset, /* Offset for hardware checksum 1. */ -unsigned *pChecksum2Offset, /* Offset for hardware checksum 2. */ -int NetNumber) -{ - /* Save the receive flags. */ - - pAc->Csum.ReceiveFlags[NetNumber] = ReceiveFlags; - - /* First checksum start offset is the IP header. */ - *pChecksum1Offset = SKCS_MAC_HEADER_SIZE; - - /* - * Second checksum start offset is the IP data. Note that this may vary - * if there are any IP header options in the actual packet. - */ - *pChecksum2Offset = SKCS_MAC_HEADER_SIZE + SKCS_IP_HEADER_SIZE; -} /* SkCsSetReceiveFlags */ - -#ifndef SK_CS_CALCULATE_CHECKSUM - -/****************************************************************************** - * - * SkCsCalculateChecksum - calculate checksum for specified data - * - * Description: - * Calculate and return the 16-bit Internet Checksum for the specified - * data. - * - * Arguments: - * pData - Pointer to data for which the checksum shall be calculated. - * Note: The pointer should be aligned on a 16-bit boundary. - * - * Length - Length in bytes of data to checksum. - * - * Returns: - * The 16-bit Internet Checksum for the specified data. - * - * Note: The checksum is calculated in the machine's natural byte order, - * i.e. little vs. big endian. Thus, the resulting checksum is different - * for the same input data on little and big endian machines. - * - * However, when written back to the network packet, the byte order is - * always in correct network order. - */ -unsigned SkCsCalculateChecksum( -void *pData, /* Data to checksum. */ -unsigned Length) /* Length of data. */ -{ - SK_U16 *pU16; /* Pointer to the data as 16-bit words. */ - unsigned long Checksum; /* Checksum; must be at least 32 bits. */ - - /* Sum up all 16-bit words. */ - - pU16 = (SK_U16 *) pData; - for (Checksum = 0; Length > 1; Length -= 2) { - Checksum += *pU16++; - } - - /* If this is an odd number of bytes, add-in the last byte. */ - - if (Length > 0) { -#ifdef SK_BIG_ENDIAN - /* Add the last byte as the high byte. */ - Checksum += ((unsigned) *(SK_U8 *) pU16) << 8; -#else /* !SK_BIG_ENDIAN */ - /* Add the last byte as the low byte. */ - Checksum += *(SK_U8 *) pU16; -#endif /* !SK_BIG_ENDIAN */ - } - - /* Add-in any carries. */ - - SKCS_OC_ADD(Checksum, Checksum, 0); - - /* Add-in any new carry. */ - - SKCS_OC_ADD(Checksum, Checksum, 0); - - /* Note: All bits beyond the 16-bit limit are now zero. */ - - return ((unsigned) Checksum); -} /* SkCsCalculateChecksum */ - -#endif /* SK_CS_CALCULATE_CHECKSUM */ - -/****************************************************************************** - * - * SkCsEvent - the CSUM event dispatcher - * - * Description: - * This is the event handler for the CSUM module. - * - * Arguments: - * pAc - Pointer to adapter context. - * - * Ioc - I/O context. - * - * Event - Event id. - * - * Param - Event dependent parameter. - * - * Returns: - * The 16-bit Internet Checksum for the specified data. - * - * Note: The checksum is calculated in the machine's natural byte order, - * i.e. little vs. big endian. Thus, the resulting checksum is different - * for the same input data on little and big endian machines. - * - * However, when written back to the network packet, the byte order is - * always in correct network order. - */ -int SkCsEvent( -SK_AC *pAc, /* Pointer to adapter context. */ -SK_IOC Ioc, /* I/O context. */ -SK_U32 Event, /* Event id. */ -SK_EVPARA Param) /* Event dependent parameter. */ -{ - int ProtoIndex; - int NetNumber; - - switch (Event) { - /* - * Clear protocol statistics. - * - * Param - Protocol index, or -1 for all protocols. - * - Net number. - */ - case SK_CSUM_EVENT_CLEAR_PROTO_STATS: - - ProtoIndex = (int)Param.Para32[1]; - NetNumber = (int)Param.Para32[0]; - if (ProtoIndex < 0) { /* Clear for all protocols. */ - if (NetNumber >= 0) { - SK_MEMSET(&pAc->Csum.ProtoStats[NetNumber][0], 0, - sizeof(pAc->Csum.ProtoStats[NetNumber])); - } - } - else { /* Clear for individual protocol. */ - SK_MEMSET(&pAc->Csum.ProtoStats[NetNumber][ProtoIndex], 0, - sizeof(pAc->Csum.ProtoStats[NetNumber][ProtoIndex])); - } - break; - default: - break; - } - return (0); /* Success. */ -} /* SkCsEvent */ - -#endif /* SK_USE_CSUM */ diff --git a/drivers/net/sk98lin/skge.c b/drivers/net/sk98lin/skge.c index b18c92cb629..857ade44788 100644 --- a/drivers/net/sk98lin/skge.c +++ b/drivers/net/sk98lin/skge.c @@ -101,7 +101,6 @@ * "h/skgeinit.h" * "h/skaddr.h" * "h/skgesirq.h" - * "h/skcsum.h" * "h/skrlmt.h" * ******************************************************************************/ @@ -113,6 +112,7 @@ #include #include #include +#include #include "h/skdrv1st.h" #include "h/skdrv2nd.h" @@ -601,11 +601,6 @@ SK_BOOL DualNet; return(-EAGAIN); } - SkCsSetReceiveFlags(pAC, - SKCS_PROTO_IP | SKCS_PROTO_TCP | SKCS_PROTO_UDP, - &pAC->CsOfs1, &pAC->CsOfs2, 0); - pAC->CsOfs = (pAC->CsOfs2 << 16) | pAC->CsOfs1; - BoardInitMem(pAC); /* tschilling: New common function with minimum size check. */ DualNet = SK_FALSE; @@ -823,7 +818,7 @@ uintptr_t VNextDescr; /* the virtual bus address of the next descriptor */ /* set the pointers right */ pDescr->VNextRxd = VNextDescr & 0xffffffffULL; pDescr->pNextRxd = pNextDescr; - pDescr->TcpSumStarts = pAC->CsOfs; + pDescr->TcpSumStarts = 0; /* advance one step */ pPrevDescr = pDescr; @@ -1505,8 +1500,6 @@ struct sk_buff *pMessage) /* pointer to send-message */ TXD *pOldTxd; unsigned long Flags; SK_U64 PhysAddr; - int Protocol; - int IpHeaderLength; int BytesSend = pMessage->len; SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_TX_PROGRESS, ("X")); @@ -1579,8 +1572,10 @@ struct sk_buff *pMessage) /* pointer to send-message */ pTxd->pMBuf = pMessage; if (pMessage->ip_summed == CHECKSUM_HW) { - Protocol = ((SK_U8)pMessage->data[C_OFFSET_IPPROTO] & 0xff); - if ((Protocol == C_PROTO_ID_UDP) && + u16 hdrlen = pMessage->h.raw - pMessage->data; + u16 offset = hdrlen + pMessage->csum; + + if ((pMessage->h.ipiph->protocol == IPPROTO_UDP ) && (pAC->GIni.GIChipRev == 0) && (pAC->GIni.GIChipId == CHIP_ID_YUKON)) { pTxd->TBControl = BMU_TCP_CHECK; @@ -1588,14 +1583,9 @@ struct sk_buff *pMessage) /* pointer to send-message */ pTxd->TBControl = BMU_UDP_CHECK; } - IpHeaderLength = (SK_U8)pMessage->data[C_OFFSET_IPHEADER]; - IpHeaderLength = (IpHeaderLength & 0xf) * 4; - pTxd->TcpSumOfs = 0; /* PH-Checksum already calculated */ - pTxd->TcpSumSt = C_LEN_ETHERMAC_HEADER + IpHeaderLength + - (Protocol == C_PROTO_ID_UDP ? - C_OFFSET_UDPHEADER_UDPCS : - C_OFFSET_TCPHEADER_TCPCS); - pTxd->TcpSumWr = C_LEN_ETHERMAC_HEADER + IpHeaderLength; + pTxd->TcpSumOfs = 0; + pTxd->TcpSumSt = hdrlen; + pTxd->TcpSumWr = offset; pTxd->TBControl |= BMU_OWN | BMU_STF | BMU_SW | BMU_EOF | @@ -1658,11 +1648,10 @@ struct sk_buff *pMessage) /* pointer to send-message */ TXD *pTxdLst; int CurrFrag; int BytesSend; - int IpHeaderLength; - int Protocol; skb_frag_t *sk_frag; SK_U64 PhysAddr; unsigned long Flags; + SK_U32 Control; spin_lock_irqsave(&pTxPort->TxDesRingLock, Flags); #ifndef USE_TX_COMPLETE @@ -1685,7 +1674,6 @@ struct sk_buff *pMessage) /* pointer to send-message */ pTxdFst = pTxd; pTxdLst = pTxd; BytesSend = 0; - Protocol = 0; /* ** Map the first fragment (header) into the DMA-space @@ -1703,32 +1691,31 @@ struct sk_buff *pMessage) /* pointer to send-message */ ** Does the HW need to evaluate checksum for TCP or UDP packets? */ if (pMessage->ip_summed == CHECKSUM_HW) { - pTxd->TBControl = BMU_STF | BMU_STFWD | skb_headlen(pMessage); + u16 hdrlen = pMessage->h.raw - pMessage->data; + u16 offset = hdrlen + pMessage->csum; + + Control = BMU_STFWD; + /* ** We have to use the opcode for tcp here, because the ** opcode for udp is not working in the hardware yet ** (Revision 2.0) */ - Protocol = ((SK_U8)pMessage->data[C_OFFSET_IPPROTO] & 0xff); - if ((Protocol == C_PROTO_ID_UDP) && + if ((pMessage->h.ipiph->protocol == IPPROTO_UDP ) && (pAC->GIni.GIChipRev == 0) && (pAC->GIni.GIChipId == CHIP_ID_YUKON)) { - pTxd->TBControl |= BMU_TCP_CHECK; + Control |= BMU_TCP_CHECK; } else { - pTxd->TBControl |= BMU_UDP_CHECK; + Control |= BMU_UDP_CHECK; } - IpHeaderLength = ((SK_U8)pMessage->data[C_OFFSET_IPHEADER] & 0xf)*4; - pTxd->TcpSumOfs = 0; /* PH-Checksum already claculated */ - pTxd->TcpSumSt = C_LEN_ETHERMAC_HEADER + IpHeaderLength + - (Protocol == C_PROTO_ID_UDP ? - C_OFFSET_UDPHEADER_UDPCS : - C_OFFSET_TCPHEADER_TCPCS); - pTxd->TcpSumWr = C_LEN_ETHERMAC_HEADER + IpHeaderLength; - } else { - pTxd->TBControl = BMU_CHECK | BMU_SW | BMU_STF | - skb_headlen(pMessage); - } + pTxd->TcpSumOfs = 0; + pTxd->TcpSumSt = hdrlen; + pTxd->TcpSumWr = offset; + } else + Control = BMU_CHECK | BMU_SW; + + pTxd->TBControl = BMU_STF | Control | skb_headlen(pMessage); pTxd = pTxd->pNextTxd; pTxPort->TxdRingFree--; @@ -1752,40 +1739,18 @@ struct sk_buff *pMessage) /* pointer to send-message */ pTxd->VDataHigh = (SK_U32) (PhysAddr >> 32); pTxd->pMBuf = pMessage; - /* - ** Does the HW need to evaluate checksum for TCP or UDP packets? - */ - if (pMessage->ip_summed == CHECKSUM_HW) { - pTxd->TBControl = BMU_OWN | BMU_SW | BMU_STFWD; - /* - ** We have to use the opcode for tcp here because the - ** opcode for udp is not working in the hardware yet - ** (revision 2.0) - */ - if ((Protocol == C_PROTO_ID_UDP) && - (pAC->GIni.GIChipRev == 0) && - (pAC->GIni.GIChipId == CHIP_ID_YUKON)) { - pTxd->TBControl |= BMU_TCP_CHECK; - } else { - pTxd->TBControl |= BMU_UDP_CHECK; - } - } else { - pTxd->TBControl = BMU_CHECK | BMU_SW | BMU_OWN; - } + pTxd->TBControl = Control | BMU_OWN | sk_frag->size;; /* ** Do we have the last fragment? */ if( (CurrFrag+1) == skb_shinfo(pMessage)->nr_frags ) { #ifdef USE_TX_COMPLETE - pTxd->TBControl |= BMU_EOF | BMU_IRQ_EOF | sk_frag->size; + pTxd->TBControl |= BMU_EOF | BMU_IRQ_EOF; #else - pTxd->TBControl |= BMU_EOF | sk_frag->size; + pTxd->TBControl |= BMU_EOF; #endif pTxdFst->TBControl |= BMU_OWN | BMU_SW; - - } else { - pTxd->TBControl |= sk_frag->size; } pTxdLst = pTxd; pTxd = pTxd->pNextTxd; @@ -2032,7 +1997,6 @@ SK_U32 Control; /* control field of descriptor */ struct sk_buff *pMsg; /* pointer to message holding frame */ struct sk_buff *pNewMsg; /* pointer to a new message for copying frame */ int FrameLength; /* total length of received frame */ -int IpFrameLength; SK_MBUF *pRlmtMbuf; /* ptr to a buffer for giving a frame to rlmt */ SK_EVPARA EvPara; /* an event parameter union */ unsigned long Flags; /* for spin lock */ @@ -2045,10 +2009,6 @@ SK_BOOL IsMc; SK_BOOL IsBadFrame; /* Bad frame */ SK_U32 FrameStat; -unsigned short Csum1; -unsigned short Csum2; -unsigned short Type; -int Result; SK_U64 PhysAddr; rx_start: @@ -2177,8 +2137,8 @@ rx_start: (dma_addr_t) PhysAddr, FrameLength, PCI_DMA_FROMDEVICE); - eth_copy_and_sum(pNewMsg, pMsg->data, - FrameLength, 0); + memcpy(pNewMsg->data, pMsg, FrameLength); + pci_dma_sync_single_for_device(pAC->PciDev, (dma_addr_t) PhysAddr, FrameLength, @@ -2206,69 +2166,16 @@ rx_start: /* set length in message */ skb_put(pMsg, FrameLength); - /* hardware checksum */ - Type = ntohs(*((short*)&pMsg->data[12])); + } /* frame > SK_COPY_TRESHOLD */ #ifdef USE_SK_RX_CHECKSUM - if (Type == 0x800) { - Csum1=le16_to_cpu(pRxd->TcpSums & 0xffff); - Csum2=le16_to_cpu((pRxd->TcpSums >> 16) & 0xffff); - IpFrameLength = (int) ntohs((unsigned short) - ((unsigned short *) pMsg->data)[8]); - - /* - * Test: If frame is padded, a check is not possible! - * Frame not padded? Length difference must be 14 (0xe)! - */ - if ((FrameLength - IpFrameLength) != 0xe) { - /* Frame padded => TCP offload not possible! */ - pMsg->ip_summed = CHECKSUM_NONE; - } else { - /* Frame not padded => TCP offload! */ - if ((((Csum1 & 0xfffe) && (Csum2 & 0xfffe)) && - (pAC->GIni.GIChipId == CHIP_ID_GENESIS)) || - (pAC->ChipsetType)) { - Result = SkCsGetReceiveInfo(pAC, - &pMsg->data[14], - Csum1, Csum2, pRxPort->PortIndex); - if (Result == - SKCS_STATUS_IP_FRAGMENT || - Result == - SKCS_STATUS_IP_CSUM_OK || - Result == - SKCS_STATUS_TCP_CSUM_OK || - Result == - SKCS_STATUS_UDP_CSUM_OK) { - pMsg->ip_summed = - CHECKSUM_UNNECESSARY; - } - else if (Result == - SKCS_STATUS_TCP_CSUM_ERROR || - Result == - SKCS_STATUS_UDP_CSUM_ERROR || - Result == - SKCS_STATUS_IP_CSUM_ERROR_UDP || - Result == - SKCS_STATUS_IP_CSUM_ERROR_TCP || - Result == - SKCS_STATUS_IP_CSUM_ERROR ) { - /* HW Checksum error */ - SK_DBG_MSG(NULL, SK_DBGMOD_DRV, - SK_DBGCAT_DRV_RX_PROGRESS, - ("skge: CRC error. Frame dropped!\n")); - goto rx_failed; - } else { - pMsg->ip_summed = - CHECKSUM_NONE; - } - }/* checksumControl calculation valid */ - } /* Frame length check */ - } /* IP frame */ + pMsg->csum = pRxd->TcpSums; + pMsg->ip_summed = CHECKSUM_HW; #else - pMsg->ip_summed = CHECKSUM_NONE; + pMsg->ip_summed = CHECKSUM_NONE; #endif - } /* frame > SK_COPY_TRESHOLD */ - + + SK_DBG_MSG(NULL, SK_DBGMOD_DRV, 1,("V")); ForRlmt = SK_RLMT_RX_PROTOCOL; #if 0 -- cgit v1.2.3 From 4f4c81504284c0ab66fc6d773dfb3b54aca02427 Mon Sep 17 00:00:00 2001 From: "shemminger@osdl.org" Date: Wed, 23 Nov 2005 22:00:50 -0800 Subject: [PATCH] sk98lin: add permanent address support Add permanent address and link status support via ethtool. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sk98lin/skethtool.c | 2 ++ drivers/net/sk98lin/skge.c | 3 ++- 2 files changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/sk98lin/skethtool.c b/drivers/net/sk98lin/skethtool.c index fb639959292..b71769ae460 100644 --- a/drivers/net/sk98lin/skethtool.c +++ b/drivers/net/sk98lin/skethtool.c @@ -549,4 +549,6 @@ struct ethtool_ops SkGeEthtoolOps = { .phys_id = locateDevice, .get_pauseparam = getPauseParams, .set_pauseparam = setPauseParams, + .get_link = ethtool_op_get_link, + .get_perm_addr = ethtool_op_get_perm_addr, }; diff --git a/drivers/net/sk98lin/skge.c b/drivers/net/sk98lin/skge.c index 857ade44788..6e2ffd684c2 100644 --- a/drivers/net/sk98lin/skge.c +++ b/drivers/net/sk98lin/skge.c @@ -4908,8 +4908,8 @@ static int __devinit skge_probe_one(struct pci_dev *pdev, SkGeYellowLED(pAC, pAC->IoBase, 1); - memcpy(&dev->dev_addr, &pAC->Addr.Net[0].CurrentMacAddress, 6); + memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); SkGeProcCreate(dev); @@ -4962,6 +4962,7 @@ static int __devinit skge_probe_one(struct pci_dev *pdev, SkGeProcCreate(dev); memcpy(&dev->dev_addr, &pAC->Addr.Net[1].CurrentMacAddress, 6); + memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); printk("%s: %s\n", dev->name, pAC->DeviceStr); printk(" PrefPort:B RlmtMode:Dual Check Link State\n"); -- cgit v1.2.3 From be0df20cb5ffd36ced9393d004e473d5c531b5da Mon Sep 17 00:00:00 2001 From: "shemminger@osdl.org" Date: Wed, 23 Nov 2005 22:00:51 -0800 Subject: [PATCH] sk98lin: avoid message confusion with skge Avoid possible confusion between skge and sk98lin driver by tagging messages properly. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sk98lin/skge.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/sk98lin/skge.c b/drivers/net/sk98lin/skge.c index 6e2ffd684c2..00c5d7f04c6 100644 --- a/drivers/net/sk98lin/skge.c +++ b/drivers/net/sk98lin/skge.c @@ -4853,7 +4853,7 @@ static int __devinit skge_probe_one(struct pci_dev *pdev, dev->irq = pdev->irq; error = SkGeInitPCI(pAC); if (error) { - printk("SKGE: PCI setup failed: %i\n", error); + printk(KERN_ERR "sk98lin: PCI setup failed: %i\n", error); goto out_free_netdev; } @@ -4889,7 +4889,7 @@ static int __devinit skge_probe_one(struct pci_dev *pdev, /* Register net device */ if (register_netdev(dev)) { - printk(KERN_ERR "SKGE: Could not register device.\n"); + printk(KERN_ERR "sk98lin: Could not register device.\n"); goto out_free_resources; } @@ -4955,7 +4955,7 @@ static int __devinit skge_probe_one(struct pci_dev *pdev, #endif if (register_netdev(dev)) { - printk(KERN_ERR "SKGE: Could not register device.\n"); + printk(KERN_ERR "sk98lin: Could not register device for seconf port.\n"); free_netdev(dev); pAC->dev[1] = pAC->dev[0]; } else { -- cgit v1.2.3