From f2783c15007468c14972e2617db51e9affc7fad9 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Thu, 20 Oct 2005 09:23:26 +1000 Subject: powerpc: Merge time.c and asm/time.h. We now use the merged time.c for both 32-bit and 64-bit compilation with ARCH=powerpc, and for ARCH=ppc64, but not for ARCH=ppc32. This removes setup_default_decr (folds its function into time_init) and moves wakeup_decrementer into time.c. This also makes an asm-powerpc/rtc.h. Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/Makefile | 4 +- arch/powerpc/kernel/misc_32.S | 27 + arch/powerpc/kernel/ppc_ksyms.c | 1 - arch/powerpc/kernel/setup_64.c | 9 - arch/powerpc/kernel/time.c | 978 ++++++++++++++++++++++++++++++ arch/powerpc/platforms/powermac/cpufreq.c | 9 - arch/powerpc/platforms/powermac/time.c | 28 +- arch/ppc/kernel/Makefile | 2 +- arch/ppc/kernel/time.c | 9 + arch/ppc64/kernel/Makefile | 2 +- arch/ppc64/kernel/pmac_time.c | 2 - arch/ppc64/kernel/setup.c | 9 - arch/ppc64/kernel/time.c | 879 --------------------------- drivers/macintosh/via-pmu.c | 11 - include/asm-powerpc/irq.h | 2 + include/asm-powerpc/rtc.h | 80 +++ include/asm-powerpc/time.h | 212 +++++++ include/asm-ppc64/time.h | 124 ---- 18 files changed, 1330 insertions(+), 1058 deletions(-) create mode 100644 arch/powerpc/kernel/time.c delete mode 100644 arch/ppc64/kernel/time.c create mode 100644 include/asm-powerpc/rtc.h create mode 100644 include/asm-powerpc/time.h delete mode 100644 include/asm-ppc64/time.h diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index 5c5d2b5f3ca..b347ac32025 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -29,7 +29,7 @@ extra-$(CONFIG_PPC64) += entry_64.o extra-$(CONFIG_PPC_FPU) += fpu.o extra-y += vmlinux.lds -obj-y += process.o init_task.o \ +obj-y += process.o init_task.o time.o \ prom.o systbl.o traps.o obj-$(CONFIG_PPC32) += entry_32.o idle_6xx.o setup_32.o misc_32.o obj-$(CONFIG_PPC64) += setup_64.o misc_64.o @@ -44,7 +44,7 @@ endif else # stuff used from here for ARCH=ppc or ARCH=ppc64 -obj-$(CONFIG_PPC64) += traps.o process.o init_task.o +obj-$(CONFIG_PPC64) += traps.o process.o init_task.o time.o fpux-$(CONFIG_PPC32) += fpu.o extra-$(CONFIG_PPC_FPU) += $(fpux-y) diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S index 0b0e908b506..303229b090b 100644 --- a/arch/powerpc/kernel/misc_32.S +++ b/arch/powerpc/kernel/misc_32.S @@ -35,6 +35,33 @@ _GLOBAL(__delay) 1: bdnz 1b blr +/* + * This returns the high 64 bits of the product of two 64-bit numbers. + */ +_GLOBAL(mulhdu) + cmpwi r6,0 + cmpwi cr1,r3,0 + mr r10,r4 + mulhwu r4,r4,r5 + beq 1f + mulhwu r0,r10,r6 + mullw r7,r10,r5 + addc r7,r0,r7 + addze r4,r4 +1: beqlr cr1 /* all done if high part of A is 0 */ + mr r10,r3 + mullw r9,r3,r5 + mulhwu r3,r3,r5 + beq 2f + mullw r0,r10,r6 + mulhwu r8,r10,r6 + addc r7,r0,r7 + adde r4,r4,r8 + addze r3,r3 +2: addc r4,r4,r9 + addze r3,r3 + blr + /* * Returns (address we're running at) - (address we were linked at) * for use before the text and data are mapped to KERNELBASE. diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c index 010554e5fe4..40c9e67e1b2 100644 --- a/arch/powerpc/kernel/ppc_ksyms.c +++ b/arch/powerpc/kernel/ppc_ksyms.c @@ -260,7 +260,6 @@ EXPORT_SYMBOL(__res); #ifdef CONFIG_PPC32 EXPORT_SYMBOL(next_mmu_context); EXPORT_SYMBOL(set_context); -EXPORT_SYMBOL(disarm_decr); #endif #ifdef CONFIG_PPC_STD_MMU_32 diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index 4fcf67575cb..6f29614c358 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -1083,15 +1083,6 @@ void ppc64_terminate_msg(unsigned int src, const char *msg) printk("[terminate]%04x %s\n", src, msg); } -/* This should only be called on processor 0 during calibrate decr */ -void __init setup_default_decr(void) -{ - struct paca_struct *lpaca = get_paca(); - - lpaca->default_decr = tb_ticks_per_jiffy; - lpaca->next_jiffy_update_tb = get_tb() + tb_ticks_per_jiffy; -} - #ifndef CONFIG_PPC_ISERIES /* * This function can be used by platforms to "find" legacy serial ports. diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c new file mode 100644 index 00000000000..d1608473075 --- /dev/null +++ b/arch/powerpc/kernel/time.c @@ -0,0 +1,978 @@ +/* + * Common time routines among all ppc machines. + * + * Written by Cort Dougan (cort@cs.nmt.edu) to merge + * Paul Mackerras' version and mine for PReP and Pmac. + * MPC8xx/MBX changes by Dan Malek (dmalek@jlc.net). + * Converted for 64-bit by Mike Corrigan (mikejc@us.ibm.com) + * + * First round of bugfixes by Gabriel Paubert (paubert@iram.es) + * to make clock more stable (2.4.0-test5). The only thing + * that this code assumes is that the timebases have been synchronized + * by firmware on SMP and are never stopped (never do sleep + * on SMP then, nap and doze are OK). + * + * Speeded up do_gettimeofday by getting rid of references to + * xtime (which required locks for consistency). (mikejc@us.ibm.com) + * + * TODO (not necessarily in this file): + * - improve precision and reproducibility of timebase frequency + * measurement at boot time. (for iSeries, we calibrate the timebase + * against the Titan chip's clock.) + * - for astronomical applications: add a new function to get + * non ambiguous timestamps even around leap seconds. This needs + * a new timestamp format and a good name. + * + * 1997-09-10 Updated NTP code according to technical memorandum Jan '96 + * "A Kernel Model for Precision Timekeeping" by Dave Mills + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#ifdef CONFIG_PPC64 +#include +#include +#endif +#ifdef CONFIG_PPC_ISERIES +#include +#include +#endif + +u64 jiffies_64 __cacheline_aligned_in_smp = INITIAL_JIFFIES; + +EXPORT_SYMBOL(jiffies_64); + +/* keep track of when we need to update the rtc */ +time_t last_rtc_update; +extern int piranha_simulator; +#ifdef CONFIG_PPC_ISERIES +unsigned long iSeries_recal_titan = 0; +unsigned long iSeries_recal_tb = 0; +static unsigned long first_settimeofday = 1; +#endif + +/* The decrementer counts down by 128 every 128ns on a 601. */ +#define DECREMENTER_COUNT_601 (1000000000 / HZ) + +#define XSEC_PER_SEC (1024*1024) + +#ifdef CONFIG_PPC64 +#define SCALE_XSEC(xsec, max) (((xsec) * max) / XSEC_PER_SEC) +#else +/* compute ((xsec << 12) * max) >> 32 */ +#define SCALE_XSEC(xsec, max) mulhwu((xsec) << 12, max) +#endif + +unsigned long tb_ticks_per_jiffy; +unsigned long tb_ticks_per_usec = 100; /* sane default */ +EXPORT_SYMBOL(tb_ticks_per_usec); +unsigned long tb_ticks_per_sec; +u64 tb_to_xs; +unsigned tb_to_us; +unsigned long processor_freq; +DEFINE_SPINLOCK(rtc_lock); +EXPORT_SYMBOL_GPL(rtc_lock); + +u64 tb_to_ns_scale; +unsigned tb_to_ns_shift; + +struct gettimeofday_struct do_gtod; + +extern unsigned long wall_jiffies; + +extern struct timezone sys_tz; +static long timezone_offset; + +void ppc_adjtimex(void); + +static unsigned adjusting_time = 0; + +unsigned long ppc_proc_freq; +unsigned long ppc_tb_freq; + +#ifdef CONFIG_PPC32 /* XXX for now */ +#define boot_cpuid 0 +#endif + +static __inline__ void timer_check_rtc(void) +{ + /* + * update the rtc when needed, this should be performed on the + * right fraction of a second. Half or full second ? + * Full second works on mk48t59 clocks, others need testing. + * Note that this update is basically only used through + * the adjtimex system calls. Setting the HW clock in + * any other way is a /dev/rtc and userland business. + * This is still wrong by -0.5/+1.5 jiffies because of the + * timer interrupt resolution and possible delay, but here we + * hit a quantization limit which can only be solved by higher + * resolution timers and decoupling time management from timer + * interrupts. This is also wrong on the clocks + * which require being written at the half second boundary. + * We should have an rtc call that only sets the minutes and + * seconds like on Intel to avoid problems with non UTC clocks. + */ + if (ntp_synced() && + xtime.tv_sec - last_rtc_update >= 659 && + abs((xtime.tv_nsec/1000) - (1000000-1000000/HZ)) < 500000/HZ && + jiffies - wall_jiffies == 1) { + struct rtc_time tm; + to_tm(xtime.tv_sec + 1 + timezone_offset, &tm); + tm.tm_year -= 1900; + tm.tm_mon -= 1; + if (ppc_md.set_rtc_time(&tm) == 0) + last_rtc_update = xtime.tv_sec + 1; + else + /* Try again one minute later */ + last_rtc_update += 60; + } +} + +/* + * This version of gettimeofday has microsecond resolution. + */ +static inline void __do_gettimeofday(struct timeval *tv, u64 tb_val) +{ + unsigned long sec, usec; + u64 tb_ticks, xsec; + struct gettimeofday_vars *temp_varp; + u64 temp_tb_to_xs, temp_stamp_xsec; + + /* + * These calculations are faster (gets rid of divides) + * if done in units of 1/2^20 rather than microseconds. + * The conversion to microseconds at the end is done + * without a divide (and in fact, without a multiply) + */ + temp_varp = do_gtod.varp; + tb_ticks = tb_val - temp_varp->tb_orig_stamp; + temp_tb_to_xs = temp_varp->tb_to_xs; + temp_stamp_xsec = temp_varp->stamp_xsec; + xsec = temp_stamp_xsec + mulhdu(tb_ticks, temp_tb_to_xs); + sec = xsec / XSEC_PER_SEC; + usec = (unsigned long)xsec & (XSEC_PER_SEC - 1); + usec = SCALE_XSEC(usec, 1000000); + + tv->tv_sec = sec; + tv->tv_usec = usec; +} + +void do_gettimeofday(struct timeval *tv) +{ + __do_gettimeofday(tv, get_tb()); +} + +EXPORT_SYMBOL(do_gettimeofday); + +/* Synchronize xtime with do_gettimeofday */ + +static inline void timer_sync_xtime(unsigned long cur_tb) +{ +#ifdef CONFIG_PPC64 + /* why do we do this? */ + struct timeval my_tv; + + __do_gettimeofday(&my_tv, cur_tb); + + if (xtime.tv_sec <= my_tv.tv_sec) { + xtime.tv_sec = my_tv.tv_sec; + xtime.tv_nsec = my_tv.tv_usec * 1000; + } +#endif +} + +/* + * There are two copies of tb_to_xs and stamp_xsec so that no + * lock is needed to access and use these values in + * do_gettimeofday. We alternate the copies and as long as a + * reasonable time elapses between changes, there will never + * be inconsistent values. ntpd has a minimum of one minute + * between updates. + */ +static inline void update_gtod(u64 new_tb_stamp, u64 new_stamp_xsec, + unsigned int new_tb_to_xs) +{ + unsigned temp_idx; + struct gettimeofday_vars *temp_varp; + + temp_idx = (do_gtod.var_idx == 0); + temp_varp = &do_gtod.vars[temp_idx]; + + temp_varp->tb_to_xs = new_tb_to_xs; + temp_varp->tb_orig_stamp = new_tb_stamp; + temp_varp->stamp_xsec = new_stamp_xsec; + smp_mb(); + do_gtod.varp = temp_varp; + do_gtod.var_idx = temp_idx; + +#ifdef CONFIG_PPC64 + /* + * tb_update_count is used to allow the userspace gettimeofday code + * to assure itself that it sees a consistent view of the tb_to_xs and + * stamp_xsec variables. It reads the tb_update_count, then reads + * tb_to_xs and stamp_xsec and then reads tb_update_count again. If + * the two values of tb_update_count match and are even then the + * tb_to_xs and stamp_xsec values are consistent. If not, then it + * loops back and reads them again until this criteria is met. + */ + ++(systemcfg->tb_update_count); + smp_wmb(); + systemcfg->tb_orig_stamp = new_tb_stamp; + systemcfg->stamp_xsec = new_stamp_xsec; + systemcfg->tb_to_xs = new_tb_to_xs; + smp_wmb(); + ++(systemcfg->tb_update_count); +#endif +} + +/* + * When the timebase - tb_orig_stamp gets too big, we do a manipulation + * between tb_orig_stamp and stamp_xsec. The goal here is to keep the + * difference tb - tb_orig_stamp small enough to always fit inside a + * 32 bits number. This is a requirement of our fast 32 bits userland + * implementation in the vdso. If we "miss" a call to this function + * (interrupt latency, CPU locked in a spinlock, ...) and we end up + * with a too big difference, then the vdso will fallback to calling + * the syscall + */ +static __inline__ void timer_recalc_offset(u64 cur_tb) +{ + unsigned long offset; + u64 new_stamp_xsec; + + offset = cur_tb - do_gtod.varp->tb_orig_stamp; + if ((offset & 0x80000000u) == 0) + return; + new_stamp_xsec = do_gtod.varp->stamp_xsec + + mulhdu(offset, do_gtod.varp->tb_to_xs); + update_gtod(cur_tb, new_stamp_xsec, do_gtod.varp->tb_to_xs); +} + +#ifdef CONFIG_SMP +unsigned long profile_pc(struct pt_regs *regs) +{ + unsigned long pc = instruction_pointer(regs); + + if (in_lock_functions(pc)) + return regs->link; + + return pc; +} +EXPORT_SYMBOL(profile_pc); +#endif + +#ifdef CONFIG_PPC_ISERIES + +/* + * This function recalibrates the timebase based on the 49-bit time-of-day + * value in the Titan chip. The Titan is much more accurate than the value + * returned by the service processor for the timebase frequency. + */ + +static void iSeries_tb_recal(void) +{ + struct div_result divres; + unsigned long titan, tb; + tb = get_tb(); + titan = HvCallXm_loadTod(); + if ( iSeries_recal_titan ) { + unsigned long tb_ticks = tb - iSeries_recal_tb; + unsigned long titan_usec = (titan - iSeries_recal_titan) >> 12; + unsigned long new_tb_ticks_per_sec = (tb_ticks * USEC_PER_SEC)/titan_usec; + unsigned long new_tb_ticks_per_jiffy = (new_tb_ticks_per_sec+(HZ/2))/HZ; + long tick_diff = new_tb_ticks_per_jiffy - tb_ticks_per_jiffy; + char sign = '+'; + /* make sure tb_ticks_per_sec and tb_ticks_per_jiffy are consistent */ + new_tb_ticks_per_sec = new_tb_ticks_per_jiffy * HZ; + + if ( tick_diff < 0 ) { + tick_diff = -tick_diff; + sign = '-'; + } + if ( tick_diff ) { + if ( tick_diff < tb_ticks_per_jiffy/25 ) { + printk( "Titan recalibrate: new tb_ticks_per_jiffy = %lu (%c%ld)\n", + new_tb_ticks_per_jiffy, sign, tick_diff ); + tb_ticks_per_jiffy = new_tb_ticks_per_jiffy; + tb_ticks_per_sec = new_tb_ticks_per_sec; + div128_by_32( XSEC_PER_SEC, 0, tb_ticks_per_sec, &divres ); + do_gtod.tb_ticks_per_sec = tb_ticks_per_sec; + tb_to_xs = divres.result_low; + do_gtod.varp->tb_to_xs = tb_to_xs; + systemcfg->tb_ticks_per_sec = tb_ticks_per_sec; + systemcfg->tb_to_xs = tb_to_xs; + } + else { + printk( "Titan recalibrate: FAILED (difference > 4 percent)\n" + " new tb_ticks_per_jiffy = %lu\n" + " old tb_ticks_per_jiffy = %lu\n", + new_tb_ticks_per_jiffy, tb_ticks_per_jiffy ); + } + } + } + iSeries_recal_titan = titan; + iSeries_recal_tb = tb; +} +#endif + +/* + * For iSeries shared processors, we have to let the hypervisor + * set the hardware decrementer. We set a virtual decrementer + * in the lppaca and call the hypervisor if the virtual + * decrementer is less than the current value in the hardware + * decrementer. (almost always the new decrementer value will + * be greater than the current hardware decementer so the hypervisor + * call will not be needed) + */ + +u64 tb_last_stamp __cacheline_aligned_in_smp; + +/* + * Note that on ppc32 this only stores the bottom 32 bits of + * the timebase value, but that's enough to tell when a jiffy + * has passed. + */ +DEFINE_PER_CPU(unsigned long, last_jiffy); + +/* + * timer_interrupt - gets called when the decrementer overflows, + * with interrupts disabled. + */ +void timer_interrupt(struct pt_regs * regs) +{ + int next_dec; + int cpu = smp_processor_id(); + unsigned long ticks; + +#ifdef CONFIG_PPC32 + if (atomic_read(&ppc_n_lost_interrupts) != 0) + do_IRQ(regs); +#endif + + irq_enter(); + + profile_tick(CPU_PROFILING, regs); + +#ifdef CONFIG_PPC_ISERIES + get_paca()->lppaca.int_dword.fields.decr_int = 0; +#endif + + while ((ticks = tb_ticks_since(per_cpu(last_jiffy, cpu))) + >= tb_ticks_per_jiffy) { + /* Update last_jiffy */ + per_cpu(last_jiffy, cpu) += tb_ticks_per_jiffy; + /* Handle RTCL overflow on 601 */ + if (__USE_RTC() && per_cpu(last_jiffy, cpu) >= 1000000000) + per_cpu(last_jiffy, cpu) -= 1000000000; + + /* + * We cannot disable the decrementer, so in the period + * between this cpu's being marked offline in cpu_online_map + * and calling stop-self, it is taking timer interrupts. + * Avoid calling into the scheduler rebalancing code if this + * is the case. + */ + if (!cpu_is_offline(cpu)) + update_process_times(user_mode(regs)); + + /* + * No need to check whether cpu is offline here; boot_cpuid + * should have been fixed up by now. + */ + if (cpu != boot_cpuid) + continue; + + write_seqlock(&xtime_lock); + tb_last_stamp += tb_ticks_per_jiffy; + timer_recalc_offset(tb_last_stamp); + do_timer(regs); + timer_sync_xtime(tb_last_stamp); + timer_check_rtc(); + write_sequnlock(&xtime_lock); + if (adjusting_time && (time_adjust == 0)) + ppc_adjtimex(); + } + + next_dec = tb_ticks_per_jiffy - ticks; + set_dec(next_dec); + +#ifdef CONFIG_PPC_ISERIES + if (hvlpevent_is_pending()) + process_hvlpevents(regs); +#endif + +#ifdef CONFIG_PPC64 + /* collect purr register values often, for accurate calculations */ + if (firmware_has_feature(FW_FEATURE_SPLPAR)) { + struct cpu_usage *cu = &__get_cpu_var(cpu_usage_array); + cu->current_tb = mfspr(SPRN_PURR); + } +#endif + + irq_exit(); +} + +void wakeup_decrementer(void) +{ + int i; + + set_dec(tb_ticks_per_jiffy); + /* + * We don't expect this to be called on a machine with a 601, + * so using get_tbl is fine. + */ + tb_last_stamp = get_tb(); + for_each_cpu(i) + per_cpu(last_jiffy, i) = tb_last_stamp; +} + +#ifdef CONFIG_SMPxxx +void __init smp_space_timers(unsigned int max_cpus) +{ + int i; + unsigned long offset = tb_ticks_per_jiffy / max_cpus; + unsigned long previous_tb = per_cpu(last_jiffy, boot_cpuid); + + for_each_cpu(i) { + if (i != boot_cpuid) { + previous_tb += offset; + per_cpu(last_jiffy, i) = previous_tb; + } + } +} +#endif + +/* + * Scheduler clock - returns current time in nanosec units. + * + * Note: mulhdu(a, b) (multiply high double unsigned) returns + * the high 64 bits of a * b, i.e. (a * b) >> 64, where a and b + * are 64-bit unsigned numbers. + */ +unsigned long long sched_clock(void) +{ + return mulhdu(get_tb(), tb_to_ns_scale) << tb_to_ns_shift; +} + +int do_settimeofday(struct timespec *tv) +{ + time_t wtm_sec, new_sec = tv->tv_sec; + long wtm_nsec, new_nsec = tv->tv_nsec; + unsigned long flags; + long int tb_delta; + u64 new_xsec; + + if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC) + return -EINVAL; + + write_seqlock_irqsave(&xtime_lock, flags); + + /* + * Updating the RTC is not the job of this code. If the time is + * stepped under NTP, the RTC will be updated after STA_UNSYNC + * is cleared. Tools like clock/hwclock either copy the RTC + * to the system time, in which case there is no point in writing + * to the RTC again, or write to the RTC but then they don't call + * settimeofday to perform this operation. + */ +#ifdef CONFIG_PPC_ISERIES + if (first_settimeofday) { + iSeries_tb_recal(); + first_settimeofday = 0; + } +#endif + tb_delta = tb_ticks_since(tb_last_stamp); + tb_delta += (jiffies - wall_jiffies) * tb_ticks_per_jiffy; + + new_nsec -= 1000 * mulhwu(tb_to_us, tb_delta); + + wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - new_sec); + wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - new_nsec); + + set_normalized_timespec(&xtime, new_sec, new_nsec); + set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec); + + /* In case of a large backwards jump in time with NTP, we want the + * clock to be updated as soon as the PLL is again in lock. + */ + last_rtc_update = new_sec - 658; + + ntp_clear(); + + new_xsec = (u64)new_nsec * XSEC_PER_SEC; + do_div(new_xsec, NSEC_PER_SEC); + new_xsec += (u64)new_sec * XSEC_PER_SEC; + update_gtod(tb_last_stamp, new_xsec, do_gtod.varp->tb_to_xs); + +#ifdef CONFIG_PPC64 + systemcfg->tz_minuteswest = sys_tz.tz_minuteswest; + systemcfg->tz_dsttime = sys_tz.tz_dsttime; +#endif + + write_sequnlock_irqrestore(&xtime_lock, flags); + clock_was_set(); + return 0; +} + +EXPORT_SYMBOL(do_settimeofday); + +#if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_MAPLE) || defined(CONFIG_PPC_BPA) || defined(CONFIG_PPC_ISERIES) +void __init generic_calibrate_decr(void) +{ + struct device_node *cpu; + struct div_result divres; + unsigned int *fp; + int node_found; + + /* + * The cpu node should have a timebase-frequency property + * to tell us the rate at which the decrementer counts. + */ + cpu = of_find_node_by_type(NULL, "cpu"); + + ppc_tb_freq = DEFAULT_TB_FREQ; /* hardcoded default */ + node_found = 0; + if (cpu != 0) { + fp = (unsigned int *)get_property(cpu, "timebase-frequency", + NULL); + if (fp != 0) { + node_found = 1; + ppc_tb_freq = *fp; + } + } + if (!node_found) + printk(KERN_ERR "WARNING: Estimating decrementer frequency " + "(not found)\n"); + + ppc_proc_freq = DEFAULT_PROC_FREQ; + node_found = 0; + if (cpu != 0) { + fp = (unsigned int *)get_property(cpu, "clock-frequency", + NULL); + if (fp != 0) { + node_found = 1; + ppc_proc_freq = *fp; + } + } + if (!node_found) + printk(KERN_ERR "WARNING: Estimating processor frequency " + "(not found)\n"); + + of_node_put(cpu); + + printk(KERN_INFO "time_init: decrementer frequency = %lu.%.6lu MHz\n", + ppc_tb_freq/1000000, ppc_tb_freq%1000000); + printk(KERN_INFO "time_init: processor frequency = %lu.%.6lu MHz\n", + ppc_proc_freq/1000000, ppc_proc_freq%1000000); + + tb_ticks_per_jiffy = ppc_tb_freq / HZ; + tb_ticks_per_sec = tb_ticks_per_jiffy * HZ; + tb_ticks_per_usec = ppc_tb_freq / 1000000; + tb_to_us = mulhwu_scale_factor(ppc_tb_freq, 1000000); + div128_by_32(1024*1024, 0, tb_ticks_per_sec, &divres); + tb_to_xs = divres.result_low; +} +#endif + +unsigned long get_boot_time(void) +{ + struct rtc_time tm; + + if (ppc_md.get_boot_time) + return ppc_md.get_boot_time(); + if (!ppc_md.get_rtc_time) + return 0; + ppc_md.get_rtc_time(&tm); + return mktime(tm.tm_year+1900, tm.tm_mon+1, tm.tm_mday, + tm.tm_hour, tm.tm_min, tm.tm_sec); +} + +/* This function is only called on the boot processor */ +void __init time_init(void) +{ + unsigned long flags; + unsigned long tm = 0; + struct div_result res; + u64 scale; + unsigned shift; + + if (ppc_md.time_init != NULL) + timezone_offset = ppc_md.time_init(); + + ppc_md.calibrate_decr(); + +#ifdef CONFIG_PPC64 + get_paca()->default_decr = tb_ticks_per_jiffy; +#endif + + /* + * Compute scale factor for sched_clock. + * The calibrate_decr() function has set tb_ticks_per_sec, + * which is the timebase frequency. + * We compute 1e9 * 2^64 / tb_ticks_per_sec and interpret + * the 128-bit result as a 64.64 fixed-point number. + * We then shift that number right until it is less than 1.0, + * giving us the scale factor and shift count to use in + * sched_clock(). + */ + div128_by_32(1000000000, 0, tb_ticks_per_sec, &res); + scale = res.result_low; + for (shift = 0; res.result_high != 0; ++shift) { + scale = (scale >> 1) | (res.result_high << 63); + res.result_high >>= 1; + } + tb_to_ns_scale = scale; + tb_to_ns_shift = shift; + +#ifdef CONFIG_PPC_ISERIES + if (!piranha_simulator) +#endif + tm = get_boot_time(); + + write_seqlock_irqsave(&xtime_lock, flags); + xtime.tv_sec = tm; + xtime.tv_nsec = 0; + tb_last_stamp = get_tb(); + do_gtod.varp = &do_gtod.vars[0]; + do_gtod.var_idx = 0; + do_gtod.varp->tb_orig_stamp = tb_last_stamp; + __get_cpu_var(last_jiffy) = tb_last_stamp; + do_gtod.varp->stamp_xsec = (u64) xtime.tv_sec * XSEC_PER_SEC; + do_gtod.tb_ticks_per_sec = tb_ticks_per_sec; + do_gtod.varp->tb_to_xs = tb_to_xs; + do_gtod.tb_to_us = tb_to_us; +#ifdef CONFIG_PPC64 + systemcfg->tb_orig_stamp = tb_last_stamp; + systemcfg->tb_update_count = 0; + systemcfg->tb_ticks_per_sec = tb_ticks_per_sec; + systemcfg->stamp_xsec = xtime.tv_sec * XSEC_PER_SEC; + systemcfg->tb_to_xs = tb_to_xs; +#endif + + time_freq = 0; + + /* If platform provided a timezone (pmac), we correct the time */ + if (timezone_offset) { + sys_tz.tz_minuteswest = -timezone_offset / 60; + sys_tz.tz_dsttime = 0; + xtime.tv_sec -= timezone_offset; + } + + last_rtc_update = xtime.tv_sec; + set_normalized_timespec(&wall_to_monotonic, + -xtime.tv_sec, -xtime.tv_nsec); + write_sequnlock_irqrestore(&xtime_lock, flags); + + /* Not exact, but the timer interrupt takes care of this */ + set_dec(tb_ticks_per_jiffy); +} + +/* + * After adjtimex is called, adjust the conversion of tb ticks + * to microseconds to keep do_gettimeofday synchronized + * with ntpd. + * + * Use the time_adjust, time_freq and time_offset computed by adjtimex to + * adjust the frequency. + */ + +/* #define DEBUG_PPC_ADJTIMEX 1 */ + +void ppc_adjtimex(void) +{ +#ifdef CONFIG_PPC64 + unsigned long den, new_tb_ticks_per_sec, tb_ticks, old_xsec, + new_tb_to_xs, new_xsec, new_stamp_xsec; + unsigned long tb_ticks_per_sec_delta; + long delta_freq, ltemp; + struct div_result divres; + unsigned long flags; + long singleshot_ppm = 0; + + /* + * Compute parts per million frequency adjustment to + * accomplish the time adjustment implied by time_offset to be + * applied over the elapsed time indicated by time_constant. + * Use SHIFT_USEC to get it into the same units as + * time_freq. + */ + if ( time_offset < 0 ) { + ltemp = -time_offset; + ltemp <<= SHIFT_USEC - SHIFT_UPDATE; + ltemp >>= SHIFT_KG + time_constant; + ltemp = -ltemp; + } else { + ltemp = time_offset; + ltemp <<= SHIFT_USEC - SHIFT_UPDATE; + ltemp >>= SHIFT_KG + time_constant; + } + + /* If there is a single shot time adjustment in progress */ + if ( time_adjust ) { +#ifdef DEBUG_PPC_ADJTIMEX + printk("ppc_adjtimex: "); + if ( adjusting_time == 0 ) + printk("starting "); + printk("single shot time_adjust = %ld\n", time_adjust); +#endif + + adjusting_time = 1; + + /* + * Compute parts per million frequency adjustment + * to match time_adjust + */ + singleshot_ppm = tickadj * HZ; + /* + * The adjustment should be tickadj*HZ to match the code in + * linux/kernel/timer.c, but experiments show that this is too + * large. 3/4 of tickadj*HZ seems about right + */ + singleshot_ppm -= singleshot_ppm / 4; + /* Use SHIFT_USEC to get it into the same units as time_freq */ + singleshot_ppm <<= SHIFT_USEC; + if ( time_adjust < 0 ) + singleshot_ppm = -singleshot_ppm; + } + else { +#ifdef DEBUG_PPC_ADJTIMEX + if ( adjusting_time ) + printk("ppc_adjtimex: ending single shot time_adjust\n"); +#endif + adjusting_time = 0; + } + + /* Add up all of the frequency adjustments */ + delta_freq = time_freq + ltemp + singleshot_ppm; + + /* + * Compute a new value for tb_ticks_per_sec based on + * the frequency adjustment + */ + den = 1000000 * (1 << (SHIFT_USEC - 8)); + if ( delta_freq < 0 ) { + tb_ticks_per_sec_delta = ( tb_ticks_per_sec * ( (-delta_freq) >> (SHIFT_USEC - 8))) / den; + new_tb_ticks_per_sec = tb_ticks_per_sec + tb_ticks_per_sec_delta; + } + else { + tb_ticks_per_sec_delta = ( tb_ticks_per_sec * ( delta_freq >> (SHIFT_USEC - 8))) / den; + new_tb_ticks_per_sec = tb_ticks_per_sec - tb_ticks_per_sec_delta; + } + +#ifdef DEBUG_PPC_ADJTIMEX + printk("ppc_adjtimex: ltemp = %ld, time_freq = %ld, singleshot_ppm = %ld\n", ltemp, time_freq, singleshot_ppm); + printk("ppc_adjtimex: tb_ticks_per_sec - base = %ld new = %ld\n", tb_ticks_per_sec, new_tb_ticks_per_sec); +#endif + + /* + * Compute a new value of tb_to_xs (used to convert tb to + * microseconds) and a new value of stamp_xsec which is the + * time (in 1/2^20 second units) corresponding to + * tb_orig_stamp. This new value of stamp_xsec compensates + * for the change in frequency (implied by the new tb_to_xs) + * which guarantees that the current time remains the same. + */ + write_seqlock_irqsave( &xtime_lock, flags ); + tb_ticks = get_tb() - do_gtod.varp->tb_orig_stamp; + div128_by_32(1024*1024, 0, new_tb_ticks_per_sec, &divres); + new_tb_to_xs = divres.result_low; + new_xsec = mulhdu(tb_ticks, new_tb_to_xs); + + old_xsec = mulhdu(tb_ticks, do_gtod.varp->tb_to_xs); + new_stamp_xsec = do_gtod.varp->stamp_xsec + old_xsec - new_xsec; + + update_gtod(do_gtod.varp->tb_orig_stamp, new_stamp_xsec, new_tb_to_xs); + + write_sequnlock_irqrestore( &xtime_lock, flags ); +#endif /* CONFIG_PPC64 */ +} + + +#define FEBRUARY 2 +#define STARTOFTIME 1970 +#define SECDAY 86400L +#define SECYR (SECDAY * 365) +#define leapyear(year) ((year) % 4 == 0 && \ + ((year) % 100 != 0 || (year) % 400 == 0)) +#define days_in_year(a) (leapyear(a) ? 366 : 365) +#define days_in_month(a) (month_days[(a) - 1]) + +static int month_days[12] = { + 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 +}; + +/* + * This only works for the Gregorian calendar - i.e. after 1752 (in the UK) + */ +void GregorianDay(struct rtc_time * tm) +{ + int leapsToDate; + int lastYear; + int day; + int MonthOffset[] = { 0, 31, 59, 90, 120, 151, 181, 212, 243, 273, 304, 334 }; + + lastYear = tm->tm_year - 1; + + /* + * Number of leap corrections to apply up to end of last year + */ + leapsToDate = lastYear / 4 - lastYear / 100 + lastYear / 400; + + /* + * This year is a leap year if it is divisible by 4 except when it is + * divisible by 100 unless it is divisible by 400 + * + * e.g. 1904 was a leap year, 1900 was not, 1996 is, and 2000 was + */ + day = tm->tm_mon > 2 && leapyear(tm->tm_year); + + day += lastYear*365 + leapsToDate + MonthOffset[tm->tm_mon-1] + + tm->tm_mday; + + tm->tm_wday = day % 7; +} + +void to_tm(int tim, struct rtc_time * tm) +{ + register int i; + register long hms, day; + + day = tim / SECDAY; + hms = tim % SECDAY; + + /* Hours, minutes, seconds are easy */ + tm->tm_hour = hms / 3600; + tm->tm_min = (hms % 3600) / 60; + tm->tm_sec = (hms % 3600) % 60; + + /* Number of years in days */ + for (i = STARTOFTIME; day >= days_in_year(i); i++) + day -= days_in_year(i); + tm->tm_year = i; + + /* Number of months in days left */ + if (leapyear(tm->tm_year)) + days_in_month(FEBRUARY) = 29; + for (i = 1; day >= days_in_month(i); i++) + day -= days_in_month(i); + days_in_month(FEBRUARY) = 28; + tm->tm_mon = i; + + /* Days are what is left over (+1) from all that. */ + tm->tm_mday = day + 1; + + /* + * Determine the day of week + */ + GregorianDay(tm); +} + +/* Auxiliary function to compute scaling factors */ +/* Actually the choice of a timebase running at 1/4 the of the bus + * frequency giving resolution of a few tens of nanoseconds is quite nice. + * It makes this computation very precise (27-28 bits typically) which + * is optimistic considering the stability of most processor clock + * oscillators and the precision with which the timebase frequency + * is measured but does not harm. + */ +unsigned mulhwu_scale_factor(unsigned inscale, unsigned outscale) +{ + unsigned mlt=0, tmp, err; + /* No concern for performance, it's done once: use a stupid + * but safe and compact method to find the multiplier. + */ + + for (tmp = 1U<<31; tmp != 0; tmp >>= 1) { + if (mulhwu(inscale, mlt|tmp) < outscale) + mlt |= tmp; + } + + /* We might still be off by 1 for the best approximation. + * A side effect of this is that if outscale is too large + * the returned value will be zero. + * Many corner cases have been checked and seem to work, + * some might have been forgotten in the test however. + */ + + err = inscale * (mlt+1); + if (err <= inscale/2) + mlt++; + return mlt; +} + +/* + * Divide a 128-bit dividend by a 32-bit divisor, leaving a 128 bit + * result. + */ +void div128_by_32(u64 dividend_high, u64 dividend_low, + unsigned divisor, struct div_result *dr) +{ + unsigned long a, b, c, d; + unsigned long w, x, y, z; + u64 ra, rb, rc; + + a = dividend_high >> 32; + b = dividend_high & 0xffffffff; + c = dividend_low >> 32; + d = dividend_low & 0xffffffff; + + w = a / divisor; + ra = ((u64)(a - (w * divisor)) << 32) + b; + +#ifdef CONFIG_PPC64 + x = ra / divisor; + rb = ((ra - (x * divisor)) << 32) + c; + + y = rb / divisor; + rc = ((rb - (y * divisor)) << 32) + d; + + z = rc / divisor; +#else + /* for 32-bit, use do_div from div64.h */ + rb = ((u64) do_div(ra, divisor) << 32) + c; + x = ra; + + rc = ((u64) do_div(rb, divisor) << 32) + d; + y = rb; + + do_div(rc, divisor); + z = rc; +#endif + + dr->result_high = ((u64)w << 32) + x; + dr->result_low = ((u64)y << 32) + z; + +} + diff --git a/arch/powerpc/platforms/powermac/cpufreq.c b/arch/powerpc/platforms/powermac/cpufreq.c index bcd9224f3f9..c47f8b69725 100644 --- a/arch/powerpc/platforms/powermac/cpufreq.c +++ b/arch/powerpc/platforms/powermac/cpufreq.c @@ -110,15 +110,6 @@ static inline void local_delay(unsigned long ms) msleep(ms); } -static inline void wakeup_decrementer(void) -{ - set_dec(tb_ticks_per_jiffy); - /* No currently-supported powerbook has a 601, - * so use get_tbl, not native - */ - last_jiffy_stamp(0) = tb_last_stamp = get_tbl(); -} - #ifdef DEBUG_FREQ static inline void debug_calc_bogomips(void) { diff --git a/arch/powerpc/platforms/powermac/time.c b/arch/powerpc/platforms/powermac/time.c index 3ee6d8aa14c..eb9969b52f9 100644 --- a/arch/powerpc/platforms/powermac/time.c +++ b/arch/powerpc/platforms/powermac/time.c @@ -6,6 +6,8 @@ * * Paul Mackerras August 1996. * Copyright (C) 1996 Paul Mackerras. + * Copyright (C) 2003-2005 Benjamin Herrenschmidt. + * */ #include #include @@ -19,7 +21,9 @@ #include #include #include +#include #include +#include #include #include @@ -30,6 +34,14 @@ #include #include +#undef DEBUG + +#ifdef DEBUG +#define DBG(x...) printk(x) +#else +#define DBG(x...) +#endif + /* Apparently the RTC stores seconds since 1 Jan 1904 */ #define RTC_OFFSET 2082844800 @@ -54,10 +66,7 @@ /* Bits in IFR and IER */ #define T1_INT 0x40 /* Timer 1 interrupt */ -extern struct timezone sys_tz; - -long __init -pmac_time_init(void) +long __init pmac_time_init(void) { #ifdef CONFIG_NVRAM s32 delta = 0; @@ -210,7 +219,7 @@ via_calibrate_decr(void) tb_ticks_per_jiffy = (dstart - dend) / ((6 * HZ)/100); tb_to_us = mulhwu_scale_factor(dstart - dend, 60000); - printk(KERN_INFO "via_calibrate_decr: ticks per jiffy = %u (%u ticks)\n", + printk(KERN_INFO "via_calibrate_decr: ticks per jiffy = %lu (%u ticks)\n", tb_ticks_per_jiffy, dstart - dend); iounmap(via); @@ -228,6 +237,7 @@ time_sleep_notify(struct pmu_sleep_notifier *self, int when) static unsigned long time_diff; unsigned long flags; unsigned long seq; + struct timespec tv; switch (when) { case PBOOK_SLEEP_NOW: @@ -237,11 +247,9 @@ time_sleep_notify(struct pmu_sleep_notifier *self, int when) } while (read_seqretry_irqrestore(&xtime_lock, seq, flags)); break; case PBOOK_WAKE: - write_seqlock_irqsave(&xtime_lock, flags); - xtime.tv_sec = pmac_get_rtc_time() + time_diff; - xtime.tv_nsec = 0; - last_rtc_update = xtime.tv_sec; - write_sequnlock_irqrestore(&xtime_lock, flags); + tv.tv_sec = pmac_get_boot_time() + time_diff; + tv.tv_nsec = 0; + do_settimeofday(&tv); break; } return PBOOK_SLEEP_OK; diff --git a/arch/ppc/kernel/Makefile b/arch/ppc/kernel/Makefile index 5a742c7b050..ccbc442c9ed 100644 --- a/arch/ppc/kernel/Makefile +++ b/arch/ppc/kernel/Makefile @@ -37,7 +37,7 @@ endif # These are here while we do the architecture merge else -obj-y := irq.o idle.o time.o \ +obj-y := irq.o idle.o \ align.o perfmon.o obj-$(CONFIG_6xx) += l2cr.o cpu_setup_6xx.o obj-$(CONFIG_SOFTWARE_SUSPEND) += swsusp.o diff --git a/arch/ppc/kernel/time.c b/arch/ppc/kernel/time.c index 22d7fd1e0ae..76f44ce4772 100644 --- a/arch/ppc/kernel/time.c +++ b/arch/ppc/kernel/time.c @@ -121,6 +121,15 @@ unsigned long profile_pc(struct pt_regs *regs) EXPORT_SYMBOL(profile_pc); #endif +void wakeup_decrementer(void) +{ + set_dec(tb_ticks_per_jiffy); + /* No currently-supported powerbook has a 601, + * so use get_tbl, not native + */ + last_jiffy_stamp(0) = tb_last_stamp = get_tbl(); +} + /* * timer_interrupt - gets called when the decrementer overflows, * with interrupts disabled. diff --git a/arch/ppc64/kernel/Makefile b/arch/ppc64/kernel/Makefile index 8c9012f0ce6..18f477fa1df 100644 --- a/arch/ppc64/kernel/Makefile +++ b/arch/ppc64/kernel/Makefile @@ -12,7 +12,7 @@ obj-y := setup.o entry.o misc.o prom.o endif obj-y += irq.o idle.o dma.o \ - time.o signal.o \ + signal.o \ align.o bitops.o pacaData.o \ udbg.o ioctl32.o \ rtc.o \ diff --git a/arch/ppc64/kernel/pmac_time.c b/arch/ppc64/kernel/pmac_time.c index c89bfefbbec..56f33511591 100644 --- a/arch/ppc64/kernel/pmac_time.c +++ b/arch/ppc64/kernel/pmac_time.c @@ -180,7 +180,5 @@ void __init pmac_calibrate_decr(void) if (fp == 0) panic("can't get cpu processor frequency"); ppc_proc_freq = *fp; - - setup_default_decr(); } diff --git a/arch/ppc64/kernel/setup.c b/arch/ppc64/kernel/setup.c index 776b55b45e1..3e6c1547b71 100644 --- a/arch/ppc64/kernel/setup.c +++ b/arch/ppc64/kernel/setup.c @@ -1083,15 +1083,6 @@ void ppc64_terminate_msg(unsigned int src, const char *msg) printk("[terminate]%04x %s\n", src, msg); } -/* This should only be called on processor 0 during calibrate decr */ -void __init setup_default_decr(void) -{ - struct paca_struct *lpaca = get_paca(); - - lpaca->default_decr = tb_ticks_per_jiffy; - lpaca->next_jiffy_update_tb = get_tb() + tb_ticks_per_jiffy; -} - #ifndef CONFIG_PPC_ISERIES /* * This function can be used by platforms to "find" legacy serial ports. diff --git a/arch/ppc64/kernel/time.c b/arch/ppc64/kernel/time.c deleted file mode 100644 index 7f63755eddf..00000000000 --- a/arch/ppc64/kernel/time.c +++ /dev/null @@ -1,879 +0,0 @@ -/* - * - * Common time routines among all ppc machines. - * - * Written by Cort Dougan (cort@cs.nmt.edu) to merge - * Paul Mackerras' version and mine for PReP and Pmac. - * MPC8xx/MBX changes by Dan Malek (dmalek@jlc.net). - * Converted for 64-bit by Mike Corrigan (mikejc@us.ibm.com) - * - * First round of bugfixes by Gabriel Paubert (paubert@iram.es) - * to make clock more stable (2.4.0-test5). The only thing - * that this code assumes is that the timebases have been synchronized - * by firmware on SMP and are never stopped (never do sleep - * on SMP then, nap and doze are OK). - * - * Speeded up do_gettimeofday by getting rid of references to - * xtime (which required locks for consistency). (mikejc@us.ibm.com) - * - * TODO (not necessarily in this file): - * - improve precision and reproducibility of timebase frequency - * measurement at boot time. (for iSeries, we calibrate the timebase - * against the Titan chip's clock.) - * - for astronomical applications: add a new function to get - * non ambiguous timestamps even around leap seconds. This needs - * a new timestamp format and a good name. - * - * 1997-09-10 Updated NTP code according to technical memorandum Jan '96 - * "A Kernel Model for Precision Timekeeping" by Dave Mills - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#ifdef CONFIG_PPC_ISERIES -#include -#include -#endif -#include -#include -#include -#include -#include -#include -#include - -u64 jiffies_64 __cacheline_aligned_in_smp = INITIAL_JIFFIES; - -EXPORT_SYMBOL(jiffies_64); - -/* keep track of when we need to update the rtc */ -time_t last_rtc_update; -extern int piranha_simulator; -#ifdef CONFIG_PPC_ISERIES -unsigned long iSeries_recal_titan = 0; -unsigned long iSeries_recal_tb = 0; -static unsigned long first_settimeofday = 1; -#endif - -#define XSEC_PER_SEC (1024*1024) - -unsigned long tb_ticks_per_jiffy; -unsigned long tb_ticks_per_usec = 100; /* sane default */ -EXPORT_SYMBOL(tb_ticks_per_usec); -unsigned long tb_ticks_per_sec; -unsigned long tb_to_xs; -unsigned tb_to_us; -unsigned long processor_freq; -DEFINE_SPINLOCK(rtc_lock); -EXPORT_SYMBOL_GPL(rtc_lock); - -unsigned long tb_to_ns_scale; -unsigned long tb_to_ns_shift; - -struct gettimeofday_struct do_gtod; - -extern unsigned long wall_jiffies; -extern int smp_tb_synchronized; - -extern struct timezone sys_tz; - -void ppc_adjtimex(void); - -static unsigned adjusting_time = 0; - -unsigned long ppc_proc_freq; -unsigned long ppc_tb_freq; - -static __inline__ void timer_check_rtc(void) -{ - /* - * update the rtc when needed, this should be performed on the - * right fraction of a second. Half or full second ? - * Full second works on mk48t59 clocks, others need testing. - * Note that this update is basically only used through - * the adjtimex system calls. Setting the HW clock in - * any other way is a /dev/rtc and userland business. - * This is still wrong by -0.5/+1.5 jiffies because of the - * timer interrupt resolution and possible delay, but here we - * hit a quantization limit which can only be solved by higher - * resolution timers and decoupling time management from timer - * interrupts. This is also wrong on the clocks - * which require being written at the half second boundary. - * We should have an rtc call that only sets the minutes and - * seconds like on Intel to avoid problems with non UTC clocks. - */ - if (ntp_synced() && - xtime.tv_sec - last_rtc_update >= 659 && - abs((xtime.tv_nsec/1000) - (1000000-1000000/HZ)) < 500000/HZ && - jiffies - wall_jiffies == 1) { - struct rtc_time tm; - to_tm(xtime.tv_sec+1, &tm); - tm.tm_year -= 1900; - tm.tm_mon -= 1; - if (ppc_md.set_rtc_time(&tm) == 0) - last_rtc_update = xtime.tv_sec+1; - else - /* Try again one minute later */ - last_rtc_update += 60; - } -} - -/* - * This version of gettimeofday has microsecond resolution. - */ -static inline void __do_gettimeofday(struct timeval *tv, unsigned long tb_val) -{ - unsigned long sec, usec, tb_ticks; - unsigned long xsec, tb_xsec; - struct gettimeofday_vars * temp_varp; - unsigned long temp_tb_to_xs, temp_stamp_xsec; - - /* - * These calculations are faster (gets rid of divides) - * if done in units of 1/2^20 rather than microseconds. - * The conversion to microseconds at the end is done - * without a divide (and in fact, without a multiply) - */ - temp_varp = do_gtod.varp; - tb_ticks = tb_val - temp_varp->tb_orig_stamp; - temp_tb_to_xs = temp_varp->tb_to_xs; - temp_stamp_xsec = temp_varp->stamp_xsec; - tb_xsec = mulhdu( tb_ticks, temp_tb_to_xs ); - xsec = temp_stamp_xsec + tb_xsec; - sec = xsec / XSEC_PER_SEC; - xsec -= sec * XSEC_PER_SEC; - usec = (xsec * USEC_PER_SEC)/XSEC_PER_SEC; - - tv->tv_sec = sec; - tv->tv_usec = usec; -} - -void do_gettimeofday(struct timeval *tv) -{ - __do_gettimeofday(tv, get_tb()); -} - -EXPORT_SYMBOL(do_gettimeofday); - -/* Synchronize xtime with do_gettimeofday */ - -static inline void timer_sync_xtime(unsigned long cur_tb) -{ - struct timeval my_tv; - - __do_gettimeofday(&my_tv, cur_tb); - - if (xtime.tv_sec <= my_tv.tv_sec) { - xtime.tv_sec = my_tv.tv_sec; - xtime.tv_nsec = my_tv.tv_usec * 1000; - } -} - -/* - * When the timebase - tb_orig_stamp gets too big, we do a manipulation - * between tb_orig_stamp and stamp_xsec. The goal here is to keep the - * difference tb - tb_orig_stamp small enough to always fit inside a - * 32 bits number. This is a requirement of our fast 32 bits userland - * implementation in the vdso. If we "miss" a call to this function - * (interrupt latency, CPU locked in a spinlock, ...) and we end up - * with a too big difference, then the vdso will fallback to calling - * the syscall - */ -static __inline__ void timer_recalc_offset(unsigned long cur_tb) -{ - struct gettimeofday_vars * temp_varp; - unsigned temp_idx; - unsigned long offset, new_stamp_xsec, new_tb_orig_stamp; - - if (((cur_tb - do_gtod.varp->tb_orig_stamp) & 0x80000000u) == 0) - return; - - temp_idx = (do_gtod.var_idx == 0); - temp_varp = &do_gtod.vars[temp_idx]; - - new_tb_orig_stamp = cur_tb; - offset = new_tb_orig_stamp - do_gtod.varp->tb_orig_stamp; - new_stamp_xsec = do_gtod.varp->stamp_xsec + mulhdu(offset, do_gtod.varp->tb_to_xs); - - temp_varp->tb_to_xs = do_gtod.varp->tb_to_xs; - temp_varp->tb_orig_stamp = new_tb_orig_stamp; - temp_varp->stamp_xsec = new_stamp_xsec; - smp_mb(); - do_gtod.varp = temp_varp; - do_gtod.var_idx = temp_idx; - - ++(systemcfg->tb_update_count); - smp_wmb(); - systemcfg->tb_orig_stamp = new_tb_orig_stamp; - systemcfg->stamp_xsec = new_stamp_xsec; - smp_wmb(); - ++(systemcfg->tb_update_count); -} - -#ifdef CONFIG_SMP -unsigned long profile_pc(struct pt_regs *regs) -{ - unsigned long pc = instruction_pointer(regs); - - if (in_lock_functions(pc)) - return regs->link; - - return pc; -} -EXPORT_SYMBOL(profile_pc); -#endif - -#ifdef CONFIG_PPC_ISERIES - -/* - * This function recalibrates the timebase based on the 49-bit time-of-day - * value in the Titan chip. The Titan is much more accurate than the value - * returned by the service processor for the timebase frequency. - */ - -static void iSeries_tb_recal(void) -{ - struct div_result divres; - unsigned long titan, tb; - tb = get_tb(); - titan = HvCallXm_loadTod(); - if ( iSeries_recal_titan ) { - unsigned long tb_ticks = tb - iSeries_recal_tb; - unsigned long titan_usec = (titan - iSeries_recal_titan) >> 12; - unsigned long new_tb_ticks_per_sec = (tb_ticks * USEC_PER_SEC)/titan_usec; - unsigned long new_tb_ticks_per_jiffy = (new_tb_ticks_per_sec+(HZ/2))/HZ; - long tick_diff = new_tb_ticks_per_jiffy - tb_ticks_per_jiffy; - char sign = '+'; - /* make sure tb_ticks_per_sec and tb_ticks_per_jiffy are consistent */ - new_tb_ticks_per_sec = new_tb_ticks_per_jiffy * HZ; - - if ( tick_diff < 0 ) { - tick_diff = -tick_diff; - sign = '-'; - } - if ( tick_diff ) { - if ( tick_diff < tb_ticks_per_jiffy/25 ) { - printk( "Titan recalibrate: new tb_ticks_per_jiffy = %lu (%c%ld)\n", - new_tb_ticks_per_jiffy, sign, tick_diff ); - tb_ticks_per_jiffy = new_tb_ticks_per_jiffy; - tb_ticks_per_sec = new_tb_ticks_per_sec; - div128_by_32( XSEC_PER_SEC, 0, tb_ticks_per_sec, &divres ); - do_gtod.tb_ticks_per_sec = tb_ticks_per_sec; - tb_to_xs = divres.result_low; - do_gtod.varp->tb_to_xs = tb_to_xs; - systemcfg->tb_ticks_per_sec = tb_ticks_per_sec; - systemcfg->tb_to_xs = tb_to_xs; - } - else { - printk( "Titan recalibrate: FAILED (difference > 4 percent)\n" - " new tb_ticks_per_jiffy = %lu\n" - " old tb_ticks_per_jiffy = %lu\n", - new_tb_ticks_per_jiffy, tb_ticks_per_jiffy ); - } - } - } - iSeries_recal_titan = titan; - iSeries_recal_tb = tb; -} -#endif - -/* - * For iSeries shared processors, we have to let the hypervisor - * set the hardware decrementer. We set a virtual decrementer - * in the lppaca and call the hypervisor if the virtual - * decrementer is less than the current value in the hardware - * decrementer. (almost always the new decrementer value will - * be greater than the current hardware decementer so the hypervisor - * call will not be needed) - */ - -unsigned long tb_last_stamp __cacheline_aligned_in_smp; - -/* - * timer_interrupt - gets called when the decrementer overflows, - * with interrupts disabled. - */ -void timer_interrupt(struct pt_regs * regs) -{ - int next_dec; - unsigned long cur_tb; - struct paca_struct *lpaca = get_paca(); - unsigned long cpu = smp_processor_id(); - - irq_enter(); - - profile_tick(CPU_PROFILING, regs); - - lpaca->lppaca.int_dword.fields.decr_int = 0; - - while (lpaca->next_jiffy_update_tb <= (cur_tb = get_tb())) { - /* - * We cannot disable the decrementer, so in the period - * between this cpu's being marked offline in cpu_online_map - * and calling stop-self, it is taking timer interrupts. - * Avoid calling into the scheduler rebalancing code if this - * is the case. - */ - if (!cpu_is_offline(cpu)) - update_process_times(user_mode(regs)); - /* - * No need to check whether cpu is offline here; boot_cpuid - * should have been fixed up by now. - */ - if (cpu == boot_cpuid) { - write_seqlock(&xtime_lock); - tb_last_stamp = lpaca->next_jiffy_update_tb; - timer_recalc_offset(lpaca->next_jiffy_update_tb); - do_timer(regs); - timer_sync_xtime(lpaca->next_jiffy_update_tb); - timer_check_rtc(); - write_sequnlock(&xtime_lock); - if ( adjusting_time && (time_adjust == 0) ) - ppc_adjtimex(); - } - lpaca->next_jiffy_update_tb += tb_ticks_per_jiffy; - } - - next_dec = lpaca->next_jiffy_update_tb - cur_tb; - if (next_dec > lpaca->default_decr) - next_dec = lpaca->default_decr; - set_dec(next_dec); - -#ifdef CONFIG_PPC_ISERIES - if (hvlpevent_is_pending()) - process_hvlpevents(regs); -#endif - - /* collect purr register values often, for accurate calculations */ - if (firmware_has_feature(FW_FEATURE_SPLPAR)) { - struct cpu_usage *cu = &__get_cpu_var(cpu_usage_array); - cu->current_tb = mfspr(SPRN_PURR); - } - - irq_exit(); -} - -/* - * Scheduler clock - returns current time in nanosec units. - * - * Note: mulhdu(a, b) (multiply high double unsigned) returns - * the high 64 bits of a * b, i.e. (a * b) >> 64, where a and b - * are 64-bit unsigned numbers. - */ -unsigned long long sched_clock(void) -{ - return mulhdu(get_tb(), tb_to_ns_scale) << tb_to_ns_shift; -} - -int do_settimeofday(struct timespec *tv) -{ - time_t wtm_sec, new_sec = tv->tv_sec; - long wtm_nsec, new_nsec = tv->tv_nsec; - unsigned long flags; - unsigned long delta_xsec; - long int tb_delta; - unsigned long new_xsec; - - if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC) - return -EINVAL; - - write_seqlock_irqsave(&xtime_lock, flags); - /* Updating the RTC is not the job of this code. If the time is - * stepped under NTP, the RTC will be update after STA_UNSYNC - * is cleared. Tool like clock/hwclock either copy the RTC - * to the system time, in which case there is no point in writing - * to the RTC again, or write to the RTC but then they don't call - * settimeofday to perform this operation. - */ -#ifdef CONFIG_PPC_ISERIES - if ( first_settimeofday ) { - iSeries_tb_recal(); - first_settimeofday = 0; - } -#endif - tb_delta = tb_ticks_since(tb_last_stamp); - tb_delta += (jiffies - wall_jiffies) * tb_ticks_per_jiffy; - - new_nsec -= tb_delta / tb_ticks_per_usec / 1000; - - wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - new_sec); - wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - new_nsec); - - set_normalized_timespec(&xtime, new_sec, new_nsec); - set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec); - - /* In case of a large backwards jump in time with NTP, we want the - * clock to be updated as soon as the PLL is again in lock. - */ - last_rtc_update = new_sec - 658; - - ntp_clear(); - - delta_xsec = mulhdu( (tb_last_stamp-do_gtod.varp->tb_orig_stamp), - do_gtod.varp->tb_to_xs ); - - new_xsec = (new_nsec * XSEC_PER_SEC) / NSEC_PER_SEC; - new_xsec += new_sec * XSEC_PER_SEC; - if ( new_xsec > delta_xsec ) { - do_gtod.varp->stamp_xsec = new_xsec - delta_xsec; - systemcfg->stamp_xsec = new_xsec - delta_xsec; - } - else { - /* This is only for the case where the user is setting the time - * way back to a time such that the boot time would have been - * before 1970 ... eg. we booted ten days ago, and we are setting - * the time to Jan 5, 1970 */ - do_gtod.varp->stamp_xsec = new_xsec; - do_gtod.varp->tb_orig_stamp = tb_last_stamp; - systemcfg->stamp_xsec = new_xsec; - systemcfg->tb_orig_stamp = tb_last_stamp; - } - - systemcfg->tz_minuteswest = sys_tz.tz_minuteswest; - systemcfg->tz_dsttime = sys_tz.tz_dsttime; - - write_sequnlock_irqrestore(&xtime_lock, flags); - clock_was_set(); - return 0; -} - -EXPORT_SYMBOL(do_settimeofday); - -#if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_MAPLE) || defined(CONFIG_PPC_BPA) || defined(CONFIG_PPC_ISERIES) -void __init generic_calibrate_decr(void) -{ - struct device_node *cpu; - struct div_result divres; - unsigned int *fp; - int node_found; - - /* - * The cpu node should have a timebase-frequency property - * to tell us the rate at which the decrementer counts. - */ - cpu = of_find_node_by_type(NULL, "cpu"); - - ppc_tb_freq = DEFAULT_TB_FREQ; /* hardcoded default */ - node_found = 0; - if (cpu != 0) { - fp = (unsigned int *)get_property(cpu, "timebase-frequency", - NULL); - if (fp != 0) { - node_found = 1; - ppc_tb_freq = *fp; - } - } - if (!node_found) - printk(KERN_ERR "WARNING: Estimating decrementer frequency " - "(not found)\n"); - - ppc_proc_freq = DEFAULT_PROC_FREQ; - node_found = 0; - if (cpu != 0) { - fp = (unsigned int *)get_property(cpu, "clock-frequency", - NULL); - if (fp != 0) { - node_found = 1; - ppc_proc_freq = *fp; - } - } - if (!node_found) - printk(KERN_ERR "WARNING: Estimating processor frequency " - "(not found)\n"); - - of_node_put(cpu); - - printk(KERN_INFO "time_init: decrementer frequency = %lu.%.6lu MHz\n", - ppc_tb_freq/1000000, ppc_tb_freq%1000000); - printk(KERN_INFO "time_init: processor frequency = %lu.%.6lu MHz\n", - ppc_proc_freq/1000000, ppc_proc_freq%1000000); - - tb_ticks_per_jiffy = ppc_tb_freq / HZ; - tb_ticks_per_sec = tb_ticks_per_jiffy * HZ; - tb_ticks_per_usec = ppc_tb_freq / 1000000; - tb_to_us = mulhwu_scale_factor(ppc_tb_freq, 1000000); - div128_by_32(1024*1024, 0, tb_ticks_per_sec, &divres); - tb_to_xs = divres.result_low; - - setup_default_decr(); -} -#endif - -void __init time_init(void) -{ - /* This function is only called on the boot processor */ - unsigned long flags; - struct rtc_time tm; - struct div_result res; - unsigned long scale, shift; - - ppc_md.calibrate_decr(); - - /* - * Compute scale factor for sched_clock. - * The calibrate_decr() function has set tb_ticks_per_sec, - * which is the timebase frequency. - * We compute 1e9 * 2^64 / tb_ticks_per_sec and interpret - * the 128-bit result as a 64.64 fixed-point number. - * We then shift that number right until it is less than 1.0, - * giving us the scale factor and shift count to use in - * sched_clock(). - */ - div128_by_32(1000000000, 0, tb_ticks_per_sec, &res); - scale = res.result_low; - for (shift = 0; res.result_high != 0; ++shift) { - scale = (scale >> 1) | (res.result_high << 63); - res.result_high >>= 1; - } - tb_to_ns_scale = scale; - tb_to_ns_shift = shift; - -#ifdef CONFIG_PPC_ISERIES - if (!piranha_simulator) -#endif - ppc_md.get_boot_time(&tm); - - write_seqlock_irqsave(&xtime_lock, flags); - xtime.tv_sec = mktime(tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday, - tm.tm_hour, tm.tm_min, tm.tm_sec); - tb_last_stamp = get_tb(); - do_gtod.varp = &do_gtod.vars[0]; - do_gtod.var_idx = 0; - do_gtod.varp->tb_orig_stamp = tb_last_stamp; - get_paca()->next_jiffy_update_tb = tb_last_stamp + tb_ticks_per_jiffy; - do_gtod.varp->stamp_xsec = xtime.tv_sec * XSEC_PER_SEC; - do_gtod.tb_ticks_per_sec = tb_ticks_per_sec; - do_gtod.varp->tb_to_xs = tb_to_xs; - do_gtod.tb_to_us = tb_to_us; - systemcfg->tb_orig_stamp = tb_last_stamp; - systemcfg->tb_update_count = 0; - systemcfg->tb_ticks_per_sec = tb_ticks_per_sec; - systemcfg->stamp_xsec = xtime.tv_sec * XSEC_PER_SEC; - systemcfg->tb_to_xs = tb_to_xs; - - time_freq = 0; - - xtime.tv_nsec = 0; - last_rtc_update = xtime.tv_sec; - set_normalized_timespec(&wall_to_monotonic, - -xtime.tv_sec, -xtime.tv_nsec); - write_sequnlock_irqrestore(&xtime_lock, flags); - - /* Not exact, but the timer interrupt takes care of this */ - set_dec(tb_ticks_per_jiffy); -} - -/* - * After adjtimex is called, adjust the conversion of tb ticks - * to microseconds to keep do_gettimeofday synchronized - * with ntpd. - * - * Use the time_adjust, time_freq and time_offset computed by adjtimex to - * adjust the frequency. - */ - -/* #define DEBUG_PPC_ADJTIMEX 1 */ - -void ppc_adjtimex(void) -{ - unsigned long den, new_tb_ticks_per_sec, tb_ticks, old_xsec, new_tb_to_xs, new_xsec, new_stamp_xsec; - unsigned long tb_ticks_per_sec_delta; - long delta_freq, ltemp; - struct div_result divres; - unsigned long flags; - struct gettimeofday_vars * temp_varp; - unsigned temp_idx; - long singleshot_ppm = 0; - - /* Compute parts per million frequency adjustment to accomplish the time adjustment - implied by time_offset to be applied over the elapsed time indicated by time_constant. - Use SHIFT_USEC to get it into the same units as time_freq. */ - if ( time_offset < 0 ) { - ltemp = -time_offset; - ltemp <<= SHIFT_USEC - SHIFT_UPDATE; - ltemp >>= SHIFT_KG + time_constant; - ltemp = -ltemp; - } - else { - ltemp = time_offset; - ltemp <<= SHIFT_USEC - SHIFT_UPDATE; - ltemp >>= SHIFT_KG + time_constant; - } - - /* If there is a single shot time adjustment in progress */ - if ( time_adjust ) { -#ifdef DEBUG_PPC_ADJTIMEX - printk("ppc_adjtimex: "); - if ( adjusting_time == 0 ) - printk("starting "); - printk("single shot time_adjust = %ld\n", time_adjust); -#endif - - adjusting_time = 1; - - /* Compute parts per million frequency adjustment to match time_adjust */ - singleshot_ppm = tickadj * HZ; - /* - * The adjustment should be tickadj*HZ to match the code in - * linux/kernel/timer.c, but experiments show that this is too - * large. 3/4 of tickadj*HZ seems about right - */ - singleshot_ppm -= singleshot_ppm / 4; - /* Use SHIFT_USEC to get it into the same units as time_freq */ - singleshot_ppm <<= SHIFT_USEC; - if ( time_adjust < 0 ) - singleshot_ppm = -singleshot_ppm; - } - else { -#ifdef DEBUG_PPC_ADJTIMEX - if ( adjusting_time ) - printk("ppc_adjtimex: ending single shot time_adjust\n"); -#endif - adjusting_time = 0; - } - - /* Add up all of the frequency adjustments */ - delta_freq = time_freq + ltemp + singleshot_ppm; - - /* Compute a new value for tb_ticks_per_sec based on the frequency adjustment */ - den = 1000000 * (1 << (SHIFT_USEC - 8)); - if ( delta_freq < 0 ) { - tb_ticks_per_sec_delta = ( tb_ticks_per_sec * ( (-delta_freq) >> (SHIFT_USEC - 8))) / den; - new_tb_ticks_per_sec = tb_ticks_per_sec + tb_ticks_per_sec_delta; - } - else { - tb_ticks_per_sec_delta = ( tb_ticks_per_sec * ( delta_freq >> (SHIFT_USEC - 8))) / den; - new_tb_ticks_per_sec = tb_ticks_per_sec - tb_ticks_per_sec_delta; - } - -#ifdef DEBUG_PPC_ADJTIMEX - printk("ppc_adjtimex: ltemp = %ld, time_freq = %ld, singleshot_ppm = %ld\n", ltemp, time_freq, singleshot_ppm); - printk("ppc_adjtimex: tb_ticks_per_sec - base = %ld new = %ld\n", tb_ticks_per_sec, new_tb_ticks_per_sec); -#endif - - /* Compute a new value of tb_to_xs (used to convert tb to microseconds and a new value of - stamp_xsec which is the time (in 1/2^20 second units) corresponding to tb_orig_stamp. This - new value of stamp_xsec compensates for the change in frequency (implied by the new tb_to_xs) - which guarantees that the current time remains the same */ - write_seqlock_irqsave( &xtime_lock, flags ); - tb_ticks = get_tb() - do_gtod.varp->tb_orig_stamp; - div128_by_32( 1024*1024, 0, new_tb_ticks_per_sec, &divres ); - new_tb_to_xs = divres.result_low; - new_xsec = mulhdu( tb_ticks, new_tb_to_xs ); - - old_xsec = mulhdu( tb_ticks, do_gtod.varp->tb_to_xs ); - new_stamp_xsec = do_gtod.varp->stamp_xsec + old_xsec - new_xsec; - - /* There are two copies of tb_to_xs and stamp_xsec so that no lock is needed to access and use these - values in do_gettimeofday. We alternate the copies and as long as a reasonable time elapses between - changes, there will never be inconsistent values. ntpd has a minimum of one minute between updates */ - - temp_idx = (do_gtod.var_idx == 0); - temp_varp = &do_gtod.vars[temp_idx]; - - temp_varp->tb_to_xs = new_tb_to_xs; - temp_varp->stamp_xsec = new_stamp_xsec; - temp_varp->tb_orig_stamp = do_gtod.varp->tb_orig_stamp; - smp_mb(); - do_gtod.varp = temp_varp; - do_gtod.var_idx = temp_idx; - - /* - * tb_update_count is used to allow the problem state gettimeofday code - * to assure itself that it sees a consistent view of the tb_to_xs and - * stamp_xsec variables. It reads the tb_update_count, then reads - * tb_to_xs and stamp_xsec and then reads tb_update_count again. If - * the two values of tb_update_count match and are even then the - * tb_to_xs and stamp_xsec values are consistent. If not, then it - * loops back and reads them again until this criteria is met. - */ - ++(systemcfg->tb_update_count); - smp_wmb(); - systemcfg->tb_to_xs = new_tb_to_xs; - systemcfg->stamp_xsec = new_stamp_xsec; - smp_wmb(); - ++(systemcfg->tb_update_count); - - write_sequnlock_irqrestore( &xtime_lock, flags ); - -} - - -#define TICK_SIZE tick -#define FEBRUARY 2 -#define STARTOFTIME 1970 -#define SECDAY 86400L -#define SECYR (SECDAY * 365) -#define leapyear(year) ((year) % 4 == 0) -#define days_in_year(a) (leapyear(a) ? 366 : 365) -#define days_in_month(a) (month_days[(a) - 1]) - -static int month_days[12] = { - 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 -}; - -/* - * This only works for the Gregorian calendar - i.e. after 1752 (in the UK) - */ -void GregorianDay(struct rtc_time * tm) -{ - int leapsToDate; - int lastYear; - int day; - int MonthOffset[] = { 0, 31, 59, 90, 120, 151, 181, 212, 243, 273, 304, 334 }; - - lastYear=tm->tm_year-1; - - /* - * Number of leap corrections to apply up to end of last year - */ - leapsToDate = lastYear/4 - lastYear/100 + lastYear/400; - - /* - * This year is a leap year if it is divisible by 4 except when it is - * divisible by 100 unless it is divisible by 400 - * - * e.g. 1904 was a leap year, 1900 was not, 1996 is, and 2000 will be - */ - if((tm->tm_year%4==0) && - ((tm->tm_year%100!=0) || (tm->tm_year%400==0)) && - (tm->tm_mon>2)) - { - /* - * We are past Feb. 29 in a leap year - */ - day=1; - } - else - { - day=0; - } - - day += lastYear*365 + leapsToDate + MonthOffset[tm->tm_mon-1] + - tm->tm_mday; - - tm->tm_wday=day%7; -} - -void to_tm(int tim, struct rtc_time * tm) -{ - register int i; - register long hms, day; - - day = tim / SECDAY; - hms = tim % SECDAY; - - /* Hours, minutes, seconds are easy */ - tm->tm_hour = hms / 3600; - tm->tm_min = (hms % 3600) / 60; - tm->tm_sec = (hms % 3600) % 60; - - /* Number of years in days */ - for (i = STARTOFTIME; day >= days_in_year(i); i++) - day -= days_in_year(i); - tm->tm_year = i; - - /* Number of months in days left */ - if (leapyear(tm->tm_year)) - days_in_month(FEBRUARY) = 29; - for (i = 1; day >= days_in_month(i); i++) - day -= days_in_month(i); - days_in_month(FEBRUARY) = 28; - tm->tm_mon = i; - - /* Days are what is left over (+1) from all that. */ - tm->tm_mday = day + 1; - - /* - * Determine the day of week - */ - GregorianDay(tm); -} - -/* Auxiliary function to compute scaling factors */ -/* Actually the choice of a timebase running at 1/4 the of the bus - * frequency giving resolution of a few tens of nanoseconds is quite nice. - * It makes this computation very precise (27-28 bits typically) which - * is optimistic considering the stability of most processor clock - * oscillators and the precision with which the timebase frequency - * is measured but does not harm. - */ -unsigned mulhwu_scale_factor(unsigned inscale, unsigned outscale) { - unsigned mlt=0, tmp, err; - /* No concern for performance, it's done once: use a stupid - * but safe and compact method to find the multiplier. - */ - - for (tmp = 1U<<31; tmp != 0; tmp >>= 1) { - if (mulhwu(inscale, mlt|tmp) < outscale) mlt|=tmp; - } - - /* We might still be off by 1 for the best approximation. - * A side effect of this is that if outscale is too large - * the returned value will be zero. - * Many corner cases have been checked and seem to work, - * some might have been forgotten in the test however. - */ - - err = inscale*(mlt+1); - if (err <= inscale/2) mlt++; - return mlt; - } - -/* - * Divide a 128-bit dividend by a 32-bit divisor, leaving a 128 bit - * result. - */ - -void div128_by_32( unsigned long dividend_high, unsigned long dividend_low, - unsigned divisor, struct div_result *dr ) -{ - unsigned long a,b,c,d, w,x,y,z, ra,rb,rc; - - a = dividend_high >> 32; - b = dividend_high & 0xffffffff; - c = dividend_low >> 32; - d = dividend_low & 0xffffffff; - - w = a/divisor; - ra = (a - (w * divisor)) << 32; - - x = (ra + b)/divisor; - rb = ((ra + b) - (x * divisor)) << 32; - - y = (rb + c)/divisor; - rc = ((rb + b) - (y * divisor)) << 32; - - z = (rc + d)/divisor; - - dr->result_high = (w << 32) + x; - dr->result_low = (y << 32) + z; - -} - diff --git a/drivers/macintosh/via-pmu.c b/drivers/macintosh/via-pmu.c index 50346188452..91920a1140f 100644 --- a/drivers/macintosh/via-pmu.c +++ b/drivers/macintosh/via-pmu.c @@ -588,17 +588,6 @@ pmu_get_model(void) return pmu_kind; } -#ifndef CONFIG_PPC64 -static inline void wakeup_decrementer(void) -{ - set_dec(tb_ticks_per_jiffy); - /* No currently-supported powerbook has a 601, - * so use get_tbl, not native - */ - last_jiffy_stamp(0) = tb_last_stamp = get_tbl(); -} -#endif - static void pmu_set_server_mode(int server_mode) { struct adb_request req; diff --git a/include/asm-powerpc/irq.h b/include/asm-powerpc/irq.h index 980393a16be..07c2b3fc4c6 100644 --- a/include/asm-powerpc/irq.h +++ b/include/asm-powerpc/irq.h @@ -496,5 +496,7 @@ extern int call_handle_IRQ_event(int irq, struct pt_regs *regs, #endif /* CONFIG_IRQSTACKS */ +extern void do_IRQ(struct pt_regs *regs); + #endif /* _ASM_IRQ_H */ #endif /* __KERNEL__ */ diff --git a/include/asm-powerpc/rtc.h b/include/asm-powerpc/rtc.h new file mode 100644 index 00000000000..d38f2a077db --- /dev/null +++ b/include/asm-powerpc/rtc.h @@ -0,0 +1,80 @@ +/* + * Real-time clock definitions and interfaces + * + * Author: Tom Rini + * + * 2002 (c) MontaVista, Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + * + * Based on: + * include/asm-m68k/rtc.h + * + * Copyright Richard Zidlicky + * implementation details for genrtc/q40rtc driver + * + * And the old drivers/macintosh/rtc.c which was heavily based on: + * Linux/SPARC Real Time Clock Driver + * Copyright (C) 1996 Thomas K. Dyas (tdyas@eden.rutgers.edu) + * + * With additional work by Paul Mackerras and Franz Sirl. + */ + +#ifndef __ASM_POWERPC_RTC_H__ +#define __ASM_POWERPC_RTC_H__ + +#ifdef __KERNEL__ + +#include + +#include +#include + +#define RTC_PIE 0x40 /* periodic interrupt enable */ +#define RTC_AIE 0x20 /* alarm interrupt enable */ +#define RTC_UIE 0x10 /* update-finished interrupt enable */ + +/* some dummy definitions */ +#define RTC_BATT_BAD 0x100 /* battery bad */ +#define RTC_SQWE 0x08 /* enable square-wave output */ +#define RTC_DM_BINARY 0x04 /* all time/date values are BCD if clear */ +#define RTC_24H 0x02 /* 24 hour mode - else hours bit 7 means pm */ +#define RTC_DST_EN 0x01 /* auto switch DST - works f. USA only */ + +static inline unsigned int get_rtc_time(struct rtc_time *time) +{ + if (ppc_md.get_rtc_time) + ppc_md.get_rtc_time(time); + return RTC_24H; +} + +/* Set the current date and time in the real time clock. */ +static inline int set_rtc_time(struct rtc_time *time) +{ + if (ppc_md.get_rtc_time) { + ppc_md.set_rtc_time(time); + return 0; + } + return -EINVAL; +} + +static inline unsigned int get_rtc_ss(void) +{ + struct rtc_time h; + + get_rtc_time(&h); + return h.tm_sec; +} + +static inline int get_rtc_pll(struct rtc_pll_info *pll) +{ + return -EINVAL; +} +static inline int set_rtc_pll(struct rtc_pll_info *pll) +{ + return -EINVAL; +} + +#endif /* __KERNEL__ */ +#endif /* __ASM_POWERPC_RTC_H__ */ diff --git a/include/asm-powerpc/time.h b/include/asm-powerpc/time.h new file mode 100644 index 00000000000..4eecc38f709 --- /dev/null +++ b/include/asm-powerpc/time.h @@ -0,0 +1,212 @@ +/* + * Common time prototypes and such for all ppc machines. + * + * Written by Cort Dougan (cort@cs.nmt.edu) to merge + * Paul Mackerras' version and mine for PReP and Pmac. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef __POWERPC_TIME_H +#define __POWERPC_TIME_H + +#ifdef __KERNEL__ +#include +#include +#include + +#include +#ifdef CONFIG_PPC64 +#include +#include +#endif + +/* time.c */ +extern unsigned long tb_ticks_per_jiffy; +extern unsigned long tb_ticks_per_usec; +extern unsigned long tb_ticks_per_sec; +extern u64 tb_to_xs; +extern unsigned tb_to_us; +extern u64 tb_last_stamp; + +DECLARE_PER_CPU(unsigned long, last_jiffy); + +struct rtc_time; +extern void to_tm(int tim, struct rtc_time * tm); +extern time_t last_rtc_update; + +extern void generic_calibrate_decr(void); +extern void wakeup_decrementer(void); + +/* Some sane defaults: 125 MHz timebase, 1GHz processor */ +extern unsigned long ppc_proc_freq; +#define DEFAULT_PROC_FREQ (DEFAULT_TB_FREQ * 8) +extern unsigned long ppc_tb_freq; +#define DEFAULT_TB_FREQ 125000000UL + +/* + * By putting all of this stuff into a single struct we + * reduce the number of cache lines touched by do_gettimeofday. + * Both by collecting all of the data in one cache line and + * by touching only one TOC entry on ppc64. + */ +struct gettimeofday_vars { + u64 tb_to_xs; + u64 stamp_xsec; + u64 tb_orig_stamp; +}; + +struct gettimeofday_struct { + unsigned long tb_ticks_per_sec; + struct gettimeofday_vars vars[2]; + struct gettimeofday_vars * volatile varp; + unsigned var_idx; + unsigned tb_to_us; +}; + +struct div_result { + u64 result_high; + u64 result_low; +}; + +/* Accessor functions for the timebase (RTC on 601) registers. */ +/* If one day CONFIG_POWER is added just define __USE_RTC as 1 */ +#ifdef CONFIG_6xx +#define __USE_RTC() cpu_has_feature(CPU_FTR_USE_TB) +#else +#define __USE_RTC() 0 +#endif + +/* On ppc64 this gets us the whole timebase; on ppc32 just the lower half */ +static inline unsigned long get_tbl(void) +{ + unsigned long tbl; + +#if defined(CONFIG_403GCX) + asm volatile("mfspr %0, 0x3dd" : "=r" (tbl)); +#else + asm volatile("mftb %0" : "=r" (tbl)); +#endif + return tbl; +} + +static inline unsigned int get_tbu(void) +{ + unsigned int tbu; + +#if defined(CONFIG_403GCX) + asm volatile("mfspr %0, 0x3dc" : "=r" (tbu)); +#else + asm volatile("mftbu %0" : "=r" (tbu)); +#endif + return tbu; +} + +static inline unsigned int get_rtcl(void) +{ + unsigned int rtcl; + + asm volatile("mfrtcl %0" : "=r" (rtcl)); + return rtcl; +} + +#ifdef CONFIG_PPC64 +static inline u64 get_tb(void) +{ + return mftb(); +} +#else +static inline u64 get_tb(void) +{ + unsigned int tbhi, tblo, tbhi2; + + do { + tbhi = get_tbu(); + tblo = get_tbl(); + tbhi2 = get_tbu(); + } while (tbhi != tbhi2); + + return ((u64)tbhi << 32) | tblo; +} +#endif + +static inline void set_tb(unsigned int upper, unsigned int lower) +{ + mtspr(SPRN_TBWL, 0); + mtspr(SPRN_TBWU, upper); + mtspr(SPRN_TBWL, lower); +} + +/* Accessor functions for the decrementer register. + * The 4xx doesn't even have a decrementer. I tried to use the + * generic timer interrupt code, which seems OK, with the 4xx PIT + * in auto-reload mode. The problem is PIT stops counting when it + * hits zero. If it would wrap, we could use it just like a decrementer. + */ +static inline unsigned int get_dec(void) +{ +#if defined(CONFIG_40x) + return (mfspr(SPRN_PIT)); +#else + return (mfspr(SPRN_DEC)); +#endif +} + +static inline void set_dec(int val) +{ +#if defined(CONFIG_40x) + return; /* Have to let it auto-reload */ +#elif defined(CONFIG_8xx_CPU6) + set_dec_cpu6(val); +#else +#ifdef CONFIG_PPC_ISERIES + struct paca_struct *lpaca = get_paca(); + int cur_dec; + + if (lpaca->lppaca.shared_proc) { + lpaca->lppaca.virtual_decr = val; + cur_dec = get_dec(); + if (cur_dec > val) + HvCall_setVirtualDecr(); + } else +#endif + mtspr(SPRN_DEC, val); +#endif /* not 40x or 8xx_CPU6 */ +} + +static inline unsigned long tb_ticks_since(unsigned long tstamp) +{ + if (__USE_RTC()) { + int delta = get_rtcl() - (unsigned int) tstamp; + return delta < 0 ? delta + 1000000000 : delta; + } + return get_tbl() - tstamp; +} + +#define mulhwu(x,y) \ +({unsigned z; asm ("mulhwu %0,%1,%2" : "=r" (z) : "r" (x), "r" (y)); z;}) + +#ifdef CONFIG_PPC64 +#define mulhdu(x,y) \ +({unsigned long z; asm ("mulhdu %0,%1,%2" : "=r" (z) : "r" (x), "r" (y)); z;}) +#else +extern u64 mulhdu(u64, u64); +#endif + +unsigned mulhwu_scale_factor(unsigned, unsigned); +void div128_by_32(u64 dividend_high, u64 dividend_low, + unsigned divisor, struct div_result *dr); + +/* Used to store Processor Utilization register (purr) values */ + +struct cpu_usage { + u64 current_tb; /* Holds the current purr register values */ +}; + +DECLARE_PER_CPU(struct cpu_usage, cpu_usage_array); + +#endif /* __KERNEL__ */ +#endif /* __PPC64_TIME_H */ diff --git a/include/asm-ppc64/time.h b/include/asm-ppc64/time.h deleted file mode 100644 index c6c762cad8b..00000000000 --- a/include/asm-ppc64/time.h +++ /dev/null @@ -1,124 +0,0 @@ -/* - * Common time prototypes and such for all ppc machines. - * - * Written by Cort Dougan (cort@cs.nmt.edu) to merge - * Paul Mackerras' version and mine for PReP and Pmac. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef __PPC64_TIME_H -#define __PPC64_TIME_H - -#ifdef __KERNEL__ -#include -#include -#include - -#include -#include -#include - -/* time.c */ -extern unsigned long tb_ticks_per_jiffy; -extern unsigned long tb_ticks_per_usec; -extern unsigned long tb_ticks_per_sec; -extern unsigned long tb_to_xs; -extern unsigned tb_to_us; -extern unsigned long tb_last_stamp; - -struct rtc_time; -extern void to_tm(int tim, struct rtc_time * tm); -extern time_t last_rtc_update; - -void generic_calibrate_decr(void); -void setup_default_decr(void); - -/* Some sane defaults: 125 MHz timebase, 1GHz processor */ -extern unsigned long ppc_proc_freq; -#define DEFAULT_PROC_FREQ (DEFAULT_TB_FREQ * 8) -extern unsigned long ppc_tb_freq; -#define DEFAULT_TB_FREQ 125000000UL - -/* - * By putting all of this stuff into a single struct we - * reduce the number of cache lines touched by do_gettimeofday. - * Both by collecting all of the data in one cache line and - * by touching only one TOC entry - */ -struct gettimeofday_vars { - unsigned long tb_to_xs; - unsigned long stamp_xsec; - unsigned long tb_orig_stamp; -}; - -struct gettimeofday_struct { - unsigned long tb_ticks_per_sec; - struct gettimeofday_vars vars[2]; - struct gettimeofday_vars * volatile varp; - unsigned var_idx; - unsigned tb_to_us; -}; - -struct div_result { - unsigned long result_high; - unsigned long result_low; -}; - -int via_calibrate_decr(void); - -static __inline__ unsigned long get_tb(void) -{ - return mftb(); -} - -/* Accessor functions for the decrementer register. */ -static __inline__ unsigned int get_dec(void) -{ - return (mfspr(SPRN_DEC)); -} - -static __inline__ void set_dec(int val) -{ -#ifdef CONFIG_PPC_ISERIES - struct paca_struct *lpaca = get_paca(); - int cur_dec; - - if (lpaca->lppaca.shared_proc) { - lpaca->lppaca.virtual_decr = val; - cur_dec = get_dec(); - if (cur_dec > val) - HvCall_setVirtualDecr(); - } else -#endif - mtspr(SPRN_DEC, val); -} - -static inline unsigned long tb_ticks_since(unsigned long tstamp) -{ - return get_tb() - tstamp; -} - -#define mulhwu(x,y) \ -({unsigned z; asm ("mulhwu %0,%1,%2" : "=r" (z) : "r" (x), "r" (y)); z;}) -#define mulhdu(x,y) \ -({unsigned long z; asm ("mulhdu %0,%1,%2" : "=r" (z) : "r" (x), "r" (y)); z;}) - - -unsigned mulhwu_scale_factor(unsigned, unsigned); -void div128_by_32( unsigned long dividend_high, unsigned long dividend_low, - unsigned divisor, struct div_result *dr ); - -/* Used to store Processor Utilization register (purr) values */ - -struct cpu_usage { - u64 current_tb; /* Holds the current purr register values */ -}; - -DECLARE_PER_CPU(struct cpu_usage, cpu_usage_array); - -#endif /* __KERNEL__ */ -#endif /* __PPC64_TIME_H */ -- cgit v1.2.3