From ff77c352ae17768c61cfc36357f0a3904552f11c Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Daniel=20Gl=C3=B6ckner?= Date: Tue, 22 Sep 2009 16:46:38 -0700 Subject: gpiolib: allow poll() on value MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Many gpio chips allow to generate interrupts when the value of a pin changes. This patch gives usermode application the opportunity to make use of this feature by calling poll(2) on the /sys/class/gpio/gpioN/value sysfs file. The edge to trigger can be set in the edge file in the same directory. Possible values are "none", "rising", "falling", and "both". Using level triggers is not possible with current sysfs since nothing changes the GPIO value (and the IRQ keeps triggering). Edge triggering will "just work". Note that if there was an event between read() and poll(), the poll() returns immediately. Also note that this version only supports true GPIO interrupts. Some later patch might be able to synthesize this behavior by timer-driven polling; some systems seem to need that. [dbrownell@users.sourceforge.net: align ids to 16 bit ids; whitespace] Signed-off-by: Daniel Glöckner Signed-off-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/ABI/testing/sysfs-gpio | 1 + Documentation/gpio.txt | 7 ++ drivers/gpio/gpiolib.c | 208 ++++++++++++++++++++++++++++++++++- 3 files changed, 211 insertions(+), 5 deletions(-) diff --git a/Documentation/ABI/testing/sysfs-gpio b/Documentation/ABI/testing/sysfs-gpio index 8aab8092ad3..80f4c94c7be 100644 --- a/Documentation/ABI/testing/sysfs-gpio +++ b/Documentation/ABI/testing/sysfs-gpio @@ -19,6 +19,7 @@ Description: /gpioN ... for each exported GPIO #N /value ... always readable, writes fail for input GPIOs /direction ... r/w as: in, out (default low); write: high, low + /edge ... r/w as: none, falling, rising, both /gpiochipN ... for each gpiochip; #N is its first GPIO /base ... (r/o) same as N /label ... (r/o) descriptive, not necessarily unique diff --git a/Documentation/gpio.txt b/Documentation/gpio.txt index 566edaa56a5..fa4dc077ae0 100644 --- a/Documentation/gpio.txt +++ b/Documentation/gpio.txt @@ -524,6 +524,13 @@ and have the following read/write attributes: is configured as an output, this value may be written; any nonzero value is treated as high. + "edge" ... reads as either "none", "rising", "falling", or + "both". Write these strings to select the signal edge(s) + that will make poll(2) on the "value" file return. + + This file exists only if the pin can be configured as an + interrupt generating input pin. + GPIO controllers have paths like /sys/class/gpio/chipchip42/ (for the controller implementing GPIOs starting at #42) and have the following read-only attributes: diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index aef6b3d8e2c..bb11a429394 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -1,5 +1,6 @@ #include #include +#include #include #include #include @@ -7,6 +8,7 @@ #include #include #include +#include /* Optional implementation infrastructure for GPIO interfaces. @@ -49,6 +51,13 @@ struct gpio_desc { #define FLAG_RESERVED 2 #define FLAG_EXPORT 3 /* protected by sysfs_lock */ #define FLAG_SYSFS 4 /* exported via /sys/class/gpio/control */ +#define FLAG_TRIG_FALL 5 /* trigger on falling edge */ +#define FLAG_TRIG_RISE 6 /* trigger on rising edge */ + +#define PDESC_ID_SHIFT 16 /* add new flags before this one */ + +#define GPIO_FLAGS_MASK ((1 << PDESC_ID_SHIFT) - 1) +#define GPIO_TRIGGER_MASK (BIT(FLAG_TRIG_FALL) | BIT(FLAG_TRIG_RISE)) #ifdef CONFIG_DEBUG_FS const char *label; @@ -56,6 +65,15 @@ struct gpio_desc { }; static struct gpio_desc gpio_desc[ARCH_NR_GPIOS]; +#ifdef CONFIG_GPIO_SYSFS +struct poll_desc { + struct work_struct work; + struct sysfs_dirent *value_sd; +}; + +static struct idr pdesc_idr; +#endif + static inline void desc_set_label(struct gpio_desc *d, const char *label) { #ifdef CONFIG_DEBUG_FS @@ -188,10 +206,10 @@ static DEFINE_MUTEX(sysfs_lock); * /value * * always readable, subject to hardware behavior * * may be writable, as zero/nonzero - * - * REVISIT there will likely be an attribute for configuring async - * notifications, e.g. to specify polling interval or IRQ trigger type - * that would for example trigger a poll() on the "value". + * /edge + * * configures behavior of poll(2) on /value + * * available only if pin can generate IRQs on input + * * is read/write as "none", "falling", "rising", or "both" */ static ssize_t gpio_direction_show(struct device *dev, @@ -288,6 +306,175 @@ static ssize_t gpio_value_store(struct device *dev, static /*const*/ DEVICE_ATTR(value, 0644, gpio_value_show, gpio_value_store); +static irqreturn_t gpio_sysfs_irq(int irq, void *priv) +{ + struct work_struct *work = priv; + + schedule_work(work); + return IRQ_HANDLED; +} + +static void gpio_notify_sysfs(struct work_struct *work) +{ + struct poll_desc *pdesc; + + pdesc = container_of(work, struct poll_desc, work); + sysfs_notify_dirent(pdesc->value_sd); +} + +static int gpio_setup_irq(struct gpio_desc *desc, struct device *dev, + unsigned long gpio_flags) +{ + struct poll_desc *pdesc; + unsigned long irq_flags; + int ret, irq, id; + + if ((desc->flags & GPIO_TRIGGER_MASK) == gpio_flags) + return 0; + + irq = gpio_to_irq(desc - gpio_desc); + if (irq < 0) + return -EIO; + + id = desc->flags >> PDESC_ID_SHIFT; + pdesc = idr_find(&pdesc_idr, id); + if (pdesc) { + free_irq(irq, &pdesc->work); + cancel_work_sync(&pdesc->work); + } + + desc->flags &= ~GPIO_TRIGGER_MASK; + + if (!gpio_flags) { + ret = 0; + goto free_sd; + } + + irq_flags = IRQF_SHARED; + if (test_bit(FLAG_TRIG_FALL, &gpio_flags)) + irq_flags |= IRQF_TRIGGER_FALLING; + if (test_bit(FLAG_TRIG_RISE, &gpio_flags)) + irq_flags |= IRQF_TRIGGER_RISING; + + if (!pdesc) { + pdesc = kmalloc(sizeof(*pdesc), GFP_KERNEL); + if (!pdesc) { + ret = -ENOMEM; + goto err_out; + } + + do { + ret = -ENOMEM; + if (idr_pre_get(&pdesc_idr, GFP_KERNEL)) + ret = idr_get_new_above(&pdesc_idr, + pdesc, 1, &id); + } while (ret == -EAGAIN); + + if (ret) + goto free_mem; + + desc->flags &= GPIO_FLAGS_MASK; + desc->flags |= (unsigned long)id << PDESC_ID_SHIFT; + + if (desc->flags >> PDESC_ID_SHIFT != id) { + ret = -ERANGE; + goto free_id; + } + + pdesc->value_sd = sysfs_get_dirent(dev->kobj.sd, "value"); + if (!pdesc->value_sd) { + ret = -ENODEV; + goto free_id; + } + INIT_WORK(&pdesc->work, gpio_notify_sysfs); + } + + ret = request_irq(irq, gpio_sysfs_irq, irq_flags, + "gpiolib", &pdesc->work); + if (ret) + goto free_sd; + + desc->flags |= gpio_flags; + return 0; + +free_sd: + sysfs_put(pdesc->value_sd); +free_id: + idr_remove(&pdesc_idr, id); + desc->flags &= GPIO_FLAGS_MASK; +free_mem: + kfree(pdesc); +err_out: + return ret; +} + +static const struct { + const char *name; + unsigned long flags; +} trigger_types[] = { + { "none", 0 }, + { "falling", BIT(FLAG_TRIG_FALL) }, + { "rising", BIT(FLAG_TRIG_RISE) }, + { "both", BIT(FLAG_TRIG_FALL) | BIT(FLAG_TRIG_RISE) }, +}; + +static ssize_t gpio_edge_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + const struct gpio_desc *desc = dev_get_drvdata(dev); + ssize_t status; + + mutex_lock(&sysfs_lock); + + if (!test_bit(FLAG_EXPORT, &desc->flags)) + status = -EIO; + else { + int i; + + status = 0; + for (i = 0; i < ARRAY_SIZE(trigger_types); i++) + if ((desc->flags & GPIO_TRIGGER_MASK) + == trigger_types[i].flags) { + status = sprintf(buf, "%s\n", + trigger_types[i].name); + break; + } + } + + mutex_unlock(&sysfs_lock); + return status; +} + +static ssize_t gpio_edge_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t size) +{ + struct gpio_desc *desc = dev_get_drvdata(dev); + ssize_t status; + int i; + + for (i = 0; i < ARRAY_SIZE(trigger_types); i++) + if (sysfs_streq(trigger_types[i].name, buf)) + goto found; + return -EINVAL; + +found: + mutex_lock(&sysfs_lock); + + if (!test_bit(FLAG_EXPORT, &desc->flags)) + status = -EIO; + else { + status = gpio_setup_irq(desc, dev, trigger_types[i].flags); + if (!status) + status = size; + } + + mutex_unlock(&sysfs_lock); + + return status; +} + +static DEVICE_ATTR(edge, 0644, gpio_edge_show, gpio_edge_store); + static const struct attribute *gpio_attrs[] = { &dev_attr_direction.attr, &dev_attr_value.attr, @@ -473,7 +660,7 @@ int gpio_export(unsigned gpio, bool direction_may_change) struct device *dev; dev = device_create(&gpio_class, desc->chip->dev, MKDEV(0, 0), - desc, ioname ? ioname : "gpio%d", gpio); + desc, ioname ? ioname : "gpio%d", gpio); if (dev) { if (direction_may_change) status = sysfs_create_group(&dev->kobj, @@ -481,6 +668,14 @@ int gpio_export(unsigned gpio, bool direction_may_change) else status = device_create_file(dev, &dev_attr_value); + + if (!status && gpio_to_irq(gpio) >= 0 + && (direction_may_change + || !test_bit(FLAG_IS_OUT, + &desc->flags))) + status = device_create_file(dev, + &dev_attr_edge); + if (status != 0) device_unregister(dev); } else @@ -572,6 +767,7 @@ void gpio_unexport(unsigned gpio) dev = class_find_device(&gpio_class, NULL, desc, match_export); if (dev) { + gpio_setup_irq(desc, dev, 0); clear_bit(FLAG_EXPORT, &desc->flags); put_device(dev); device_unregister(dev); @@ -656,6 +852,8 @@ static int __init gpiolib_sysfs_init(void) unsigned long flags; unsigned gpio; + idr_init(&pdesc_idr); + status = class_register(&gpio_class); if (status < 0) return status; -- cgit v1.2.3