From 66bb74888eb4bef4ba7c87c931ecb7ecca3a240c Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Thu, 9 Apr 2009 11:40:27 +0800 Subject: tracing: consolidate documents Move kmemtrace.txt, tracepoints.txt, ftrace.txt and mmiotrace.txt to the new trace/ directory. I didnt find any references to those documents in both source files and documents, so no extra work needs to be done. Signed-off-by: Li Zefan Acked-by: Pekka Paalanen Cc: Steven Rostedt Cc: Frederic Weisbecker Cc: Mathieu Desnoyers LKML-Reference: <49DD6E2B.6090200@cn.fujitsu.com> Signed-off-by: Ingo Molnar --- Documentation/tracers/mmiotrace.txt | 163 ------------------------------------ 1 file changed, 163 deletions(-) delete mode 100644 Documentation/tracers/mmiotrace.txt (limited to 'Documentation/tracers') diff --git a/Documentation/tracers/mmiotrace.txt b/Documentation/tracers/mmiotrace.txt deleted file mode 100644 index 5731c67abc5..00000000000 --- a/Documentation/tracers/mmiotrace.txt +++ /dev/null @@ -1,163 +0,0 @@ - In-kernel memory-mapped I/O tracing - - -Home page and links to optional user space tools: - - http://nouveau.freedesktop.org/wiki/MmioTrace - -MMIO tracing was originally developed by Intel around 2003 for their Fault -Injection Test Harness. In Dec 2006 - Jan 2007, using the code from Intel, -Jeff Muizelaar created a tool for tracing MMIO accesses with the Nouveau -project in mind. Since then many people have contributed. - -Mmiotrace was built for reverse engineering any memory-mapped IO device with -the Nouveau project as the first real user. Only x86 and x86_64 architectures -are supported. - -Out-of-tree mmiotrace was originally modified for mainline inclusion and -ftrace framework by Pekka Paalanen . - - -Preparation ------------ - -Mmiotrace feature is compiled in by the CONFIG_MMIOTRACE option. Tracing is -disabled by default, so it is safe to have this set to yes. SMP systems are -supported, but tracing is unreliable and may miss events if more than one CPU -is on-line, therefore mmiotrace takes all but one CPU off-line during run-time -activation. You can re-enable CPUs by hand, but you have been warned, there -is no way to automatically detect if you are losing events due to CPUs racing. - - -Usage Quick Reference ---------------------- - -$ mount -t debugfs debugfs /debug -$ echo mmiotrace > /debug/tracing/current_tracer -$ cat /debug/tracing/trace_pipe > mydump.txt & -Start X or whatever. -$ echo "X is up" > /debug/tracing/trace_marker -$ echo nop > /debug/tracing/current_tracer -Check for lost events. - - -Usage ------ - -Make sure debugfs is mounted to /debug. If not, (requires root privileges) -$ mount -t debugfs debugfs /debug - -Check that the driver you are about to trace is not loaded. - -Activate mmiotrace (requires root privileges): -$ echo mmiotrace > /debug/tracing/current_tracer - -Start storing the trace: -$ cat /debug/tracing/trace_pipe > mydump.txt & -The 'cat' process should stay running (sleeping) in the background. - -Load the driver you want to trace and use it. Mmiotrace will only catch MMIO -accesses to areas that are ioremapped while mmiotrace is active. - -During tracing you can place comments (markers) into the trace by -$ echo "X is up" > /debug/tracing/trace_marker -This makes it easier to see which part of the (huge) trace corresponds to -which action. It is recommended to place descriptive markers about what you -do. - -Shut down mmiotrace (requires root privileges): -$ echo nop > /debug/tracing/current_tracer -The 'cat' process exits. If it does not, kill it by issuing 'fg' command and -pressing ctrl+c. - -Check that mmiotrace did not lose events due to a buffer filling up. Either -$ grep -i lost mydump.txt -which tells you exactly how many events were lost, or use -$ dmesg -to view your kernel log and look for "mmiotrace has lost events" warning. If -events were lost, the trace is incomplete. You should enlarge the buffers and -try again. Buffers are enlarged by first seeing how large the current buffers -are: -$ cat /debug/tracing/buffer_size_kb -gives you a number. Approximately double this number and write it back, for -instance: -$ echo 128000 > /debug/tracing/buffer_size_kb -Then start again from the top. - -If you are doing a trace for a driver project, e.g. Nouveau, you should also -do the following before sending your results: -$ lspci -vvv > lspci.txt -$ dmesg > dmesg.txt -$ tar zcf pciid-nick-mmiotrace.tar.gz mydump.txt lspci.txt dmesg.txt -and then send the .tar.gz file. The trace compresses considerably. Replace -"pciid" and "nick" with the PCI ID or model name of your piece of hardware -under investigation and your nick name. - - -How Mmiotrace Works -------------------- - -Access to hardware IO-memory is gained by mapping addresses from PCI bus by -calling one of the ioremap_*() functions. Mmiotrace is hooked into the -__ioremap() function and gets called whenever a mapping is created. Mapping is -an event that is recorded into the trace log. Note, that ISA range mappings -are not caught, since the mapping always exists and is returned directly. - -MMIO accesses are recorded via page faults. Just before __ioremap() returns, -the mapped pages are marked as not present. Any access to the pages causes a -fault. The page fault handler calls mmiotrace to handle the fault. Mmiotrace -marks the page present, sets TF flag to achieve single stepping and exits the -fault handler. The instruction that faulted is executed and debug trap is -entered. Here mmiotrace again marks the page as not present. The instruction -is decoded to get the type of operation (read/write), data width and the value -read or written. These are stored to the trace log. - -Setting the page present in the page fault handler has a race condition on SMP -machines. During the single stepping other CPUs may run freely on that page -and events can be missed without a notice. Re-enabling other CPUs during -tracing is discouraged. - - -Trace Log Format ----------------- - -The raw log is text and easily filtered with e.g. grep and awk. One record is -one line in the log. A record starts with a keyword, followed by keyword -dependant arguments. Arguments are separated by a space, or continue until the -end of line. The format for version 20070824 is as follows: - -Explanation Keyword Space separated arguments ---------------------------------------------------------------------------- - -read event R width, timestamp, map id, physical, value, PC, PID -write event W width, timestamp, map id, physical, value, PC, PID -ioremap event MAP timestamp, map id, physical, virtual, length, PC, PID -iounmap event UNMAP timestamp, map id, PC, PID -marker MARK timestamp, text -version VERSION the string "20070824" -info for reader LSPCI one line from lspci -v -PCI address map PCIDEV space separated /proc/bus/pci/devices data -unk. opcode UNKNOWN timestamp, map id, physical, data, PC, PID - -Timestamp is in seconds with decimals. Physical is a PCI bus address, virtual -is a kernel virtual address. Width is the data width in bytes and value is the -data value. Map id is an arbitrary id number identifying the mapping that was -used in an operation. PC is the program counter and PID is process id. PC is -zero if it is not recorded. PID is always zero as tracing MMIO accesses -originating in user space memory is not yet supported. - -For instance, the following awk filter will pass all 32-bit writes that target -physical addresses in the range [0xfb73ce40, 0xfb800000[ - -$ awk '/W 4 / { adr=strtonum($5); if (adr >= 0xfb73ce40 && -adr < 0xfb800000) print; }' - - -Tools for Developers --------------------- - -The user space tools include utilities for: -- replacing numeric addresses and values with hardware register names -- replaying MMIO logs, i.e., re-executing the recorded writes - - -- cgit v1.2.3