From bf6ee0ae494596aaf311e8430684db85d1d2f25c Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Tue, 3 Oct 2006 22:17:48 +0200 Subject: remove mentionings of devfs in documentation Now that devfs is removed, there's no longer any need to document how to do this or that with devfs. This patch includes some improvements by Joe Perches. Signed-off-by: Adrian Bunk --- Documentation/usb/acm.txt | 14 -------------- Documentation/usb/usb-serial.txt | 5 ----- 2 files changed, 19 deletions(-) (limited to 'Documentation/usb') diff --git a/Documentation/usb/acm.txt b/Documentation/usb/acm.txt index 8ef45ea8f69..737d6104c3f 100644 --- a/Documentation/usb/acm.txt +++ b/Documentation/usb/acm.txt @@ -49,20 +49,6 @@ Abstract Control Model (USB CDC ACM) specification. Unfortunately many modems and most ISDN TAs use proprietary interfaces and thus won't work with this drivers. Check for ACM compliance before buying. - The driver (with devfs) creates these devices in /dev/usb/acm: - - crw-r--r-- 1 root root 166, 0 Apr 1 10:49 0 - crw-r--r-- 1 root root 166, 1 Apr 1 10:49 1 - crw-r--r-- 1 root root 166, 2 Apr 1 10:49 2 - - And so on, up to 31, with the limit being possible to change in acm.c to up -to 256, so you can use up to 256 USB modems with one computer (you'll need -three USB cards for that, though). - - If you don't use devfs, then you can create device nodes with the same -minor/major numbers anywhere you want, but either the above location or -/dev/usb/ttyACM0 is preferred. - To use the modems you need these modules loaded: usbcore.ko diff --git a/Documentation/usb/usb-serial.txt b/Documentation/usb/usb-serial.txt index a2dee6e6190..eca85f37341 100644 --- a/Documentation/usb/usb-serial.txt +++ b/Documentation/usb/usb-serial.txt @@ -13,7 +13,6 @@ CONFIGURATION Currently the driver can handle up to 256 different serial interfaces at one time. - If you are not using devfs: The major number that the driver uses is 188 so to use the driver, create the following nodes: mknod /dev/ttyUSB0 c 188 0 @@ -26,10 +25,6 @@ CONFIGURATION mknod /dev/ttyUSB254 c 188 254 mknod /dev/ttyUSB255 c 188 255 - If you are using devfs: - The devices supported by this driver will show up as - /dev/usb/tts/{0,1,...} - When the device is connected and recognized by the driver, the driver will print to the system log, which node(s) the device has been bound to. -- cgit v1.2.3