From 98f32602d42951e61a059685f842aa7d778ffab0 Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Thu, 21 May 2009 20:33:58 +0100 Subject: hugh: update email address My old address will shut down in a few days time: remove it from the tree, and add a tmpfs (shmem filesystem) maintainer entry with the new address. Signed-off-by: Hugh Dickins Signed-off-by: Hugh Dickins Signed-off-by: Linus Torvalds --- Documentation/filesystems/tmpfs.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/filesystems/tmpfs.txt b/Documentation/filesystems/tmpfs.txt index 222437efd75..3015da0c6b2 100644 --- a/Documentation/filesystems/tmpfs.txt +++ b/Documentation/filesystems/tmpfs.txt @@ -133,4 +133,4 @@ RAM/SWAP in 10240 inodes and it is only accessible by root. Author: Christoph Rohland , 1.12.01 Updated: - Hugh Dickins , 4 June 2007 + Hugh Dickins, 4 June 2007 -- cgit v1.2.3 From 0c752a93353d9b17dbe148312d732fbe06d235e1 Mon Sep 17 00:00:00 2001 From: Suresh Siddha Date: Fri, 22 May 2009 12:17:45 -0700 Subject: x86: introduce noxsave boot parameter Introduce "noxsave" boot parameter which will disable the cpu's xsave/xrstor capabilities. Useful for debugging and working around xsave related issues. [ Impact: make it possible to debug problems in the field ] Signed-off-by: Suresh Siddha Signed-off-by: H. Peter Anvin --- Documentation/kernel-parameters.txt | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'Documentation') diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index e87bdbfbcc7..fd5cac01303 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1535,6 +1535,10 @@ and is between 256 and 4096 characters. It is defined in the file register save and restore. The kernel will only save legacy floating-point registers on task switch. + noxsave [BUGS=X86] Disables x86 extended register state save + and restore using xsave. The kernel will fallback to + enabling legacy floating-point and sse state. + nohlt [BUGS=ARM,SH] Tells the kernel that the sleep(SH) or wfi(ARM) instruction doesn't work correctly and not to use it. This is also useful when using JTAG debugger. -- cgit v1.2.3 From f9fcfc3b4627a1ec9b50411060f1b384926d6610 Mon Sep 17 00:00:00 2001 From: Henrik Rydberg Date: Sat, 23 May 2009 09:51:21 -0700 Subject: Input: multitouch - augment event semantics documentation MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Through the collaboration to adapt the N-trig and Stantum HID drivers to the MT protocol, some semantic clarifications to the protocol have been made. This patch adds them to the MT documentation. Signed-off-by: Henrik Rydberg Tested-by: Stéphane Chatty Signed-off-by: Dmitry Torokhov --- Documentation/input/multi-touch-protocol.txt | 103 ++++++++++++++++++++------- 1 file changed, 79 insertions(+), 24 deletions(-) (limited to 'Documentation') diff --git a/Documentation/input/multi-touch-protocol.txt b/Documentation/input/multi-touch-protocol.txt index 9f09557aea3..a12ea3b586e 100644 --- a/Documentation/input/multi-touch-protocol.txt +++ b/Documentation/input/multi-touch-protocol.txt @@ -18,8 +18,12 @@ Usage Anonymous finger details are sent sequentially as separate packets of ABS events. Only the ABS_MT events are recognized as part of a finger packet. The end of a packet is marked by calling the input_mt_sync() -function, which generates a SYN_MT_REPORT event. The end of multi-touch -transfer is marked by calling the usual input_sync() function. +function, which generates a SYN_MT_REPORT event. This instructs the +receiver to accept the data for the current finger and prepare to receive +another. The end of a multi-touch transfer is marked by calling the usual +input_sync() function. This instructs the receiver to act upon events +accumulated since last EV_SYN/SYN_REPORT and prepare to receive a new +set of events/packets. A set of ABS_MT events with the desired properties is defined. The events are divided into categories, to allow for partial implementation. The @@ -27,11 +31,26 @@ minimum set consists of ABS_MT_TOUCH_MAJOR, ABS_MT_POSITION_X and ABS_MT_POSITION_Y, which allows for multiple fingers to be tracked. If the device supports it, the ABS_MT_WIDTH_MAJOR may be used to provide the size of the approaching finger. Anisotropy and direction may be specified with -ABS_MT_TOUCH_MINOR, ABS_MT_WIDTH_MINOR and ABS_MT_ORIENTATION. Devices with -more granular information may specify general shapes as blobs, i.e., as a -sequence of rectangular shapes grouped together by an -ABS_MT_BLOB_ID. Finally, the ABS_MT_TOOL_TYPE may be used to specify -whether the touching tool is a finger or a pen or something else. +ABS_MT_TOUCH_MINOR, ABS_MT_WIDTH_MINOR and ABS_MT_ORIENTATION. The +ABS_MT_TOOL_TYPE may be used to specify whether the touching tool is a +finger or a pen or something else. Devices with more granular information +may specify general shapes as blobs, i.e., as a sequence of rectangular +shapes grouped together by an ABS_MT_BLOB_ID. Finally, for the few devices +that currently support it, the ABS_MT_TRACKING_ID event may be used to +report finger tracking from hardware [5]. + +Here is what a minimal event sequence for a two-finger touch would look +like: + + ABS_MT_TOUCH_MAJOR + ABS_MT_POSITION_X + ABS_MT_POSITION_Y + SYN_MT_REPORT + ABS_MT_TOUCH_MAJOR + ABS_MT_POSITION_X + ABS_MT_POSITION_Y + SYN_MT_REPORT + SYN_REPORT Event Semantics @@ -44,24 +63,24 @@ ABS_MT_TOUCH_MAJOR The length of the major axis of the contact. The length should be given in surface units. If the surface has an X times Y resolution, the largest -possible value of ABS_MT_TOUCH_MAJOR is sqrt(X^2 + Y^2), the diagonal. +possible value of ABS_MT_TOUCH_MAJOR is sqrt(X^2 + Y^2), the diagonal [4]. ABS_MT_TOUCH_MINOR The length, in surface units, of the minor axis of the contact. If the -contact is circular, this event can be omitted. +contact is circular, this event can be omitted [4]. ABS_MT_WIDTH_MAJOR The length, in surface units, of the major axis of the approaching tool. This should be understood as the size of the tool itself. The orientation of the contact and the approaching tool are assumed to be the -same. +same [4]. ABS_MT_WIDTH_MINOR The length, in surface units, of the minor axis of the approaching -tool. Omit if circular. +tool. Omit if circular [4]. The above four values can be used to derive additional information about the contact. The ratio ABS_MT_TOUCH_MAJOR / ABS_MT_WIDTH_MAJOR approximates @@ -70,14 +89,17 @@ different characteristic widths [1]. ABS_MT_ORIENTATION -The orientation of the ellipse. The value should describe half a revolution -clockwise around the touch center. The scale of the value is arbitrary, but -zero should be returned for an ellipse aligned along the Y axis of the -surface. As an example, an index finger placed straight onto the axis could -return zero orientation, something negative when twisted to the left, and -something positive when twisted to the right. This value can be omitted if -the touching object is circular, or if the information is not available in -the kernel driver. +The orientation of the ellipse. The value should describe a signed quarter +of a revolution clockwise around the touch center. The signed value range +is arbitrary, but zero should be returned for a finger aligned along the Y +axis of the surface, a negative value when finger is turned to the left, and +a positive value when finger turned to the right. When completely aligned with +the X axis, the range max should be returned. Orientation can be omitted +if the touching object is circular, or if the information is not available +in the kernel driver. Partial orientation support is possible if the device +can distinguish between the two axis, but not (uniquely) any values in +between. In such cases, the range of ABS_MT_ORIENTATION should be [0, 1] +[4]. ABS_MT_POSITION_X @@ -98,8 +120,35 @@ ABS_MT_BLOB_ID The BLOB_ID groups several packets together into one arbitrarily shaped contact. This is a low-level anonymous grouping, and should not be confused -with the high-level contactID, explained below. Most kernel drivers will -not have this capability, and can safely omit the event. +with the high-level trackingID [5]. Most kernel drivers will not have blob +capability, and can safely omit the event. + +ABS_MT_TRACKING_ID + +The TRACKING_ID identifies an initiated contact throughout its life cycle +[5]. There are currently only a few devices that support it, so this event +should normally be omitted. + + +Event Computation +----------------- + +The flora of different hardware unavoidably leads to some devices fitting +better to the MT protocol than others. To simplify and unify the mapping, +this section gives recipes for how to compute certain events. + +For devices reporting contacts as rectangular shapes, signed orientation +cannot be obtained. Assuming X and Y are the lengths of the sides of the +touching rectangle, here is a simple formula that retains the most +information possible: + + ABS_MT_TOUCH_MAJOR := max(X, Y) + ABS_MT_TOUCH_MINOR := min(X, Y) + ABS_MT_ORIENTATION := bool(X > Y) + +The range of ABS_MT_ORIENTATION should be set to [0, 1], to indicate that +the device can distinguish between a finger along the Y axis (0) and a +finger along the X axis (1). Finger Tracking @@ -109,14 +158,18 @@ The kernel driver should generate an arbitrary enumeration of the set of anonymous contacts currently on the surface. The order in which the packets appear in the event stream is not important. -The process of finger tracking, i.e., to assign a unique contactID to each +The process of finger tracking, i.e., to assign a unique trackingID to each initiated contact on the surface, is left to user space; preferably the -multi-touch X driver [3]. In that driver, the contactID stays the same and +multi-touch X driver [3]. In that driver, the trackingID stays the same and unique until the contact vanishes (when the finger leaves the surface). The problem of assigning a set of anonymous fingers to a set of identified fingers is a euclidian bipartite matching problem at each event update, and relies on a sufficiently rapid update rate. +There are a few devices that support trackingID in hardware. User space can +make use of these native identifiers to reduce bandwidth and cpu usage. + + Notes ----- @@ -136,5 +189,7 @@ could be used to derive tilt. time of writing (April 2009), the MT protocol is not yet merged, and the prototype implements finger matching, basic mouse support and two-finger scrolling. The project aims at improving the quality of current multi-touch -functionality available in the synaptics X driver, and in addition +functionality available in the Synaptics X driver, and in addition implement more advanced gestures. +[4] See the section on event computation. +[5] See the section on finger tracking. -- cgit v1.2.3 From 679d92ed1403b6cf9a19aa42ec62b81cae1aa017 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Sun, 24 May 2009 19:00:08 +0200 Subject: ALSA: hda - Add 5stack-no-fp model for STAC927x The recent fix for the headphone volume control on IDT/STAC codecs resulted in the removal of invalid "Side" volume eventually. But, if the front panel doesn't exist, this setup could be regarded as a sort of regression, as reported in kernel bug #13250. Now as a workaround, a new model 5stack-no-fp is added so that the user without the front panel can choose this one explicitly. Reference: bko#13250 http://bugzilla.kernel.org/show_bug.cgi?id=13250 Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/HD-Audio-Models.txt | 1 + 1 file changed, 1 insertion(+) (limited to 'Documentation') diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt index 8eec05bc079..322869fc8a9 100644 --- a/Documentation/sound/alsa/HD-Audio-Models.txt +++ b/Documentation/sound/alsa/HD-Audio-Models.txt @@ -334,6 +334,7 @@ STAC9227/9228/9229/927x ref-no-jd Reference board without HP/Mic jack detection 3stack D965 3stack 5stack D965 5stack + SPDIF + 5stack-no-fp D965 5stack without front panel dell-3stack Dell Dimension E520 dell-bios Fixes with Dell BIOS setup auto BIOS setup (default) -- cgit v1.2.3 From c87d9732004b3f8fd82d729f12ccfb96c0df279e Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 27 May 2009 10:53:33 +0200 Subject: ALSA: Enable PCM hw_ptr_jiffies check only in xrun_debug mode The PCM hw_ptr jiffies check results sometimes in problems when a hardware doesn't give smooth hw_ptr updates. So far, au88x0 and some other drivers appear not working due to this strict check. However, this check is a nice debug tool, and the capability should be still kept. Hence, we disable this check now as default unless the user enables it by setting the xrun_debug mode to the specific stream via a proc file. Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/Procfile.txt | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'Documentation') diff --git a/Documentation/sound/alsa/Procfile.txt b/Documentation/sound/alsa/Procfile.txt index bba2dbb79d8..cfac20cf9e3 100644 --- a/Documentation/sound/alsa/Procfile.txt +++ b/Documentation/sound/alsa/Procfile.txt @@ -104,6 +104,11 @@ card*/pcm*/xrun_debug When this value is greater than 1, the driver will show the stack trace additionally. This may help the debugging. + Since 2.6.30, this option also enables the hwptr check using + jiffies. This detects spontaneous invalid pointer callback + values, but can be lead to too much corrections for a (mostly + buggy) hardware that doesn't give smooth pointer updates. + card*/pcm*/sub*/info The general information of this PCM sub-stream. -- cgit v1.2.3 From d54d462472a16fc07adb53a2fcd6c0c2a9a8dd1d Mon Sep 17 00:00:00 2001 From: Christian Engelmayer Date: Mon, 1 Jun 2009 13:46:50 +0200 Subject: hwmon: Update documentation on fan_max Add fan_max description. Add fan limit alarm 'max_alarm' to the alarm section. Signed-off-by: Christian Engelmayer Acked-by: Hans de Goede Signed-off-by: Jean Delvare --- Documentation/hwmon/sysfs-interface | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'Documentation') diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface index 2f10ce6a879..004ee161721 100644 --- a/Documentation/hwmon/sysfs-interface +++ b/Documentation/hwmon/sysfs-interface @@ -150,6 +150,11 @@ fan[1-*]_min Fan minimum value Unit: revolution/min (RPM) RW +fan[1-*]_max Fan maximum value + Unit: revolution/min (RPM) + Only rarely supported by the hardware. + RW + fan[1-*]_input Fan input value. Unit: revolution/min (RPM) RO @@ -390,6 +395,7 @@ OR in[0-*]_min_alarm in[0-*]_max_alarm fan[1-*]_min_alarm +fan[1-*]_max_alarm temp[1-*]_min_alarm temp[1-*]_max_alarm temp[1-*]_crit_alarm -- cgit v1.2.3