From 51cb21a9cd2e3bba8a69948794eb9480facdef45 Mon Sep 17 00:00:00 2001 From: Marc Singer Date: Tue, 16 May 2006 11:41:43 +0100 Subject: [ARM] 3407/1: lpd7x: documetation update Patch from Marc Singer New documentation for the touchscreen controllers and LCD panels. Signed-off-by: Marc Singer Signed-off-by: Russell King --- Documentation/arm/Sharp-LH/ADC-LH7-Touchscreen | 61 ++++++++++++++++++++++++++ Documentation/arm/Sharp-LH/LCDPanels | 59 +++++++++++++++++++++++++ 2 files changed, 120 insertions(+) create mode 100644 Documentation/arm/Sharp-LH/ADC-LH7-Touchscreen create mode 100644 Documentation/arm/Sharp-LH/LCDPanels (limited to 'Documentation') diff --git a/Documentation/arm/Sharp-LH/ADC-LH7-Touchscreen b/Documentation/arm/Sharp-LH/ADC-LH7-Touchscreen new file mode 100644 index 00000000000..1e6a23fdf2f --- /dev/null +++ b/Documentation/arm/Sharp-LH/ADC-LH7-Touchscreen @@ -0,0 +1,61 @@ +README on the ADC/Touchscreen Controller +======================================== + +The LH79524 and LH7A404 include a built-in Analog to Digital +controller (ADC) that is used to process input from a touchscreen. +The driver only implements a four-wire touch panel protocol. + +The touchscreen driver is maintenance free except for the pen-down or +touch threshold. Some resistive displays and board combinations may +require tuning of this threshold. The driver exposes some of it's +internal state in the sys filesystem. If the kernel is configured +with it, CONFIG_SYSFS, and sysfs is mounted at /sys, there will be a +directory + + /sys/devices/platform/adc-lh7.0 + +containing these files. + + -r--r--r-- 1 root root 4096 Jan 1 00:00 samples + -rw-r--r-- 1 root root 4096 Jan 1 00:00 threshold + -r--r--r-- 1 root root 4096 Jan 1 00:00 threshold_range + +The threshold is the current touch threshold. It defaults to 750 on +most targets. + + # cat threshold + 750 + +The threshold_range contains the range of valid values for the +threshold. Values outside of this range will be silently ignored. + + # cat threshold_range + 0 1023 + +To change the threshold, write a value to the threshold file. + + # echo 500 > threshold + # cat threshold + 500 + +The samples file contains the most recently sampled values from the +ADC. There are 12. Below are typical of the last sampled values when +the pen has been released. The first two and last two samples are for +detecting whether or not the pen is down. The third through sixth are +X coordinate samples. The seventh through tenth are Y coordinate +samples. + + # cat samples + 1023 1023 0 0 0 0 530 529 530 529 1023 1023 + +To determine a reasonable threshold, press on the touch panel with an +appropriate stylus and read the values from samples. + + # cat samples + 1023 676 92 103 101 102 855 919 922 922 1023 679 + +The first and eleventh samples are discarded. Thus, the important +values are the second and twelfth which are used to determine if the +pen is down. When both are below the threshold, the driver registers +that the pen is down. When either is above the threshold, it +registers then pen is up. diff --git a/Documentation/arm/Sharp-LH/LCDPanels b/Documentation/arm/Sharp-LH/LCDPanels new file mode 100644 index 00000000000..fb1b21c2f2f --- /dev/null +++ b/Documentation/arm/Sharp-LH/LCDPanels @@ -0,0 +1,59 @@ +README on the LCD Panels +======================== + +Configuration options for several LCD panels, available from Logic PD, +are included in the kernel source. This README will help you +understand the configuration data and give you some guidance for +adding support for other panels if you wish. + + +lcd-panels.h +------------ + +There is no way, at present, to detect which panel is attached to the +system at runtime. Thus the kernel configuration is static. The file +arch/arm/mach-ld7a40x/lcd-panels.h (or similar) defines all of the +panel specific parameters. + +It should be possible for this data to be shared among several device +families. The current layout may be insufficiently general, but it is +amenable to improvement. + + +PIXEL_CLOCK +----------- + +The panel data sheets will give a range of acceptable pixel clocks. +The fundamental LCDCLK input frequency is divided down by a PCD +constant in field '.tim2'. It may happen that it is impossible to set +the pixel clock within this range. A clock which is too slow will +tend to flicker. For the highest quality image, set the clock as high +as possible. + + +MARGINS +------- + +These values may be difficult to glean from the panel data sheet. In +the case of the Sharp panels, the upper margin is explicitly called +out as a specific number of lines from the top of the frame. The +other values may not matter as much as the panels tend to +automatically center the image. + + +Sync Sense +---------- + +The sense of the hsync and vsync pulses may be called out in the data +sheet. On one panel, the sense of these pulses determine the height +of the visible region on the panel. Most of the Sharp panels use +negative sense sync pulses set by the TIM2_IHS and TIM2_IVS bits in +'.tim2'. + + +Pel Layout +---------- + +The Sharp color TFT panels are all configured for 16 bit direct color +modes. The amba-lcd driver sets the pel mode to 565 for 5 bits of +each red and blue and 6 bits of green. -- cgit v1.2.3 From 0edce197db00094d04c7fb147903add814c9db67 Mon Sep 17 00:00:00 2001 From: Amy Griffis Date: Thu, 1 Jun 2006 13:11:07 -0700 Subject: [PATCH] inotify (5/5): update kernel documentation Update kernel documentation to include a description of the inotify kernel API. Signed-off-by: Amy Griffis Acked-by: Robert Love Acked-by: John McCutchan Signed-off-by: Al Viro --- Documentation/filesystems/inotify.txt | 130 ++++++++++++++++++++++++++++++++-- 1 file changed, 124 insertions(+), 6 deletions(-) (limited to 'Documentation') diff --git a/Documentation/filesystems/inotify.txt b/Documentation/filesystems/inotify.txt index 6d501903f68..59a919f1614 100644 --- a/Documentation/filesystems/inotify.txt +++ b/Documentation/filesystems/inotify.txt @@ -69,17 +69,135 @@ Prototypes: int inotify_rm_watch (int fd, __u32 mask); -(iii) Internal Kernel Implementation +(iii) Kernel Interface -Each inotify instance is associated with an inotify_device structure. +Inotify's kernel API consists a set of functions for managing watches and an +event callback. + +To use the kernel API, you must first initialize an inotify instance with a set +of inotify_operations. You are given an opaque inotify_handle, which you use +for any further calls to inotify. + + struct inotify_handle *ih = inotify_init(my_event_handler); + +You must provide a function for processing events and a function for destroying +the inotify watch. + + void handle_event(struct inotify_watch *watch, u32 wd, u32 mask, + u32 cookie, const char *name, struct inode *inode) + + watch - the pointer to the inotify_watch that triggered this call + wd - the watch descriptor + mask - describes the event that occurred + cookie - an identifier for synchronizing events + name - the dentry name for affected files in a directory-based event + inode - the affected inode in a directory-based event + + void destroy_watch(struct inotify_watch *watch) + +You may add watches by providing a pre-allocated and initialized inotify_watch +structure and specifying the inode to watch along with an inotify event mask. +You must pin the inode during the call. You will likely wish to embed the +inotify_watch structure in a structure of your own which contains other +information about the watch. Once you add an inotify watch, it is immediately +subject to removal depending on filesystem events. You must grab a reference if +you depend on the watch hanging around after the call. + + inotify_init_watch(&my_watch->iwatch); + inotify_get_watch(&my_watch->iwatch); // optional + s32 wd = inotify_add_watch(ih, &my_watch->iwatch, inode, mask); + inotify_put_watch(&my_watch->iwatch); // optional + +You may use the watch descriptor (wd) or the address of the inotify_watch for +other inotify operations. You must not directly read or manipulate data in the +inotify_watch. Additionally, you must not call inotify_add_watch() more than +once for a given inotify_watch structure, unless you have first called either +inotify_rm_watch() or inotify_rm_wd(). + +To determine if you have already registered a watch for a given inode, you may +call inotify_find_watch(), which gives you both the wd and the watch pointer for +the inotify_watch, or an error if the watch does not exist. + + wd = inotify_find_watch(ih, inode, &watchp); + +You may use container_of() on the watch pointer to access your own data +associated with a given watch. When an existing watch is found, +inotify_find_watch() bumps the refcount before releasing its locks. You must +put that reference with: + + put_inotify_watch(watchp); + +Call inotify_find_update_watch() to update the event mask for an existing watch. +inotify_find_update_watch() returns the wd of the updated watch, or an error if +the watch does not exist. + + wd = inotify_find_update_watch(ih, inode, mask); + +An existing watch may be removed by calling either inotify_rm_watch() or +inotify_rm_wd(). + + int ret = inotify_rm_watch(ih, &my_watch->iwatch); + int ret = inotify_rm_wd(ih, wd); + +A watch may be removed while executing your event handler with the following: + + inotify_remove_watch_locked(ih, iwatch); + +Call inotify_destroy() to remove all watches from your inotify instance and +release it. If there are no outstanding references, inotify_destroy() will call +your destroy_watch op for each watch. + + inotify_destroy(ih); + +When inotify removes a watch, it sends an IN_IGNORED event to your callback. +You may use this event as an indication to free the watch memory. Note that +inotify may remove a watch due to filesystem events, as well as by your request. +If you use IN_ONESHOT, inotify will remove the watch after the first event, at +which point you may call the final inotify_put_watch. + +(iv) Kernel Interface Prototypes + + struct inotify_handle *inotify_init(struct inotify_operations *ops); + + inotify_init_watch(struct inotify_watch *watch); + + s32 inotify_add_watch(struct inotify_handle *ih, + struct inotify_watch *watch, + struct inode *inode, u32 mask); + + s32 inotify_find_watch(struct inotify_handle *ih, struct inode *inode, + struct inotify_watch **watchp); + + s32 inotify_find_update_watch(struct inotify_handle *ih, + struct inode *inode, u32 mask); + + int inotify_rm_wd(struct inotify_handle *ih, u32 wd); + + int inotify_rm_watch(struct inotify_handle *ih, + struct inotify_watch *watch); + + void inotify_remove_watch_locked(struct inotify_handle *ih, + struct inotify_watch *watch); + + void inotify_destroy(struct inotify_handle *ih); + + void get_inotify_watch(struct inotify_watch *watch); + void put_inotify_watch(struct inotify_watch *watch); + + +(v) Internal Kernel Implementation + +Each inotify instance is represented by an inotify_handle structure. +Inotify's userspace consumers also have an inotify_device which is +associated with the inotify_handle, and on which events are queued. Each watch is associated with an inotify_watch structure. Watches are chained -off of each associated device and each associated inode. +off of each associated inotify_handle and each associated inode. -See fs/inotify.c for the locking and lifetime rules. +See fs/inotify.c and fs/inotify_user.c for the locking and lifetime rules. -(iv) Rationale +(vi) Rationale Q: What is the design decision behind not tying the watch to the open fd of the watched object? @@ -145,7 +263,7 @@ A: The poor user-space interface is the second biggest problem with dnotify. file descriptor-based one that allows basic file I/O and poll/select. Obtaining the fd and managing the watches could have been done either via a device file or a family of new system calls. We decided to implement a - family of system calls because that is the preffered approach for new kernel + family of system calls because that is the preferred approach for new kernel interfaces. The only real difference was whether we wanted to use open(2) and ioctl(2) or a couple of new system calls. System calls beat ioctls. -- cgit v1.2.3