From 9d0412680e6c7b685ee466842047bcfb924d6dc5 Mon Sep 17 00:00:00 2001 From: Andrew Victor Date: Mon, 5 Feb 2007 11:42:07 +0100 Subject: [ARM] 4124/1: Rename mach-at91rm9200 and arch-at91rm9200 directories Now that Linux includes support for the Atmel AT91SAM9260 and AT91SAM9261 processors in addition to the original Atmel AT91RM9200 (with support for more AT91 processors pending), the "mach-at91rm9200" and "arch-at91rm9200" directories should be renamed to indicate their more generic nature. The following git commands should be run BEFORE applying this patch: git-mv arch/arm/mach-at91rm9200 arch/arm/mach-at91 git-mv include/asm-arm/arch-at91rm9200 include/asm-arm/arch-at91 Signed-off-by: Andrew Victor Signed-off-by: Russell King --- arch/arm/mach-at91/gpio.c | 414 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 414 insertions(+) create mode 100644 arch/arm/mach-at91/gpio.c (limited to 'arch/arm/mach-at91/gpio.c') diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c new file mode 100644 index 00000000000..9b7495cd555 --- /dev/null +++ b/arch/arm/mach-at91/gpio.c @@ -0,0 +1,414 @@ +/* + * linux/arch/arm/mach-at91/gpio.c + * + * Copyright (C) 2005 HP Labs + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include "generic.h" + + +static struct at91_gpio_bank *gpio; +static int gpio_banks; + + +static inline void __iomem *pin_to_controller(unsigned pin) +{ + void __iomem *sys_base = (void __iomem *) AT91_VA_BASE_SYS; + + pin -= PIN_BASE; + pin /= 32; + if (likely(pin < gpio_banks)) + return sys_base + gpio[pin].offset; + + return NULL; +} + +static inline unsigned pin_to_mask(unsigned pin) +{ + pin -= PIN_BASE; + return 1 << (pin % 32); +} + + +/*--------------------------------------------------------------------------*/ + +/* Not all hardware capabilities are exposed through these calls; they + * only encapsulate the most common features and modes. (So if you + * want to change signals in groups, do it directly.) + * + * Bootloaders will usually handle some of the pin multiplexing setup. + * The intent is certainly that by the time Linux is fully booted, all + * pins should have been fully initialized. These setup calls should + * only be used by board setup routines, or possibly in driver probe(). + * + * For bootloaders doing all that setup, these calls could be inlined + * as NOPs so Linux won't duplicate any setup code + */ + + +/* + * mux the pin to the "A" internal peripheral role. + */ +int __init_or_module at91_set_A_periph(unsigned pin, int use_pullup) +{ + void __iomem *pio = pin_to_controller(pin); + unsigned mask = pin_to_mask(pin); + + if (!pio) + return -EINVAL; + + __raw_writel(mask, pio + PIO_IDR); + __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR)); + __raw_writel(mask, pio + PIO_ASR); + __raw_writel(mask, pio + PIO_PDR); + return 0; +} +EXPORT_SYMBOL(at91_set_A_periph); + + +/* + * mux the pin to the "B" internal peripheral role. + */ +int __init_or_module at91_set_B_periph(unsigned pin, int use_pullup) +{ + void __iomem *pio = pin_to_controller(pin); + unsigned mask = pin_to_mask(pin); + + if (!pio) + return -EINVAL; + + __raw_writel(mask, pio + PIO_IDR); + __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR)); + __raw_writel(mask, pio + PIO_BSR); + __raw_writel(mask, pio + PIO_PDR); + return 0; +} +EXPORT_SYMBOL(at91_set_B_periph); + + +/* + * mux the pin to the gpio controller (instead of "A" or "B" peripheral), and + * configure it for an input. + */ +int __init_or_module at91_set_gpio_input(unsigned pin, int use_pullup) +{ + void __iomem *pio = pin_to_controller(pin); + unsigned mask = pin_to_mask(pin); + + if (!pio) + return -EINVAL; + + __raw_writel(mask, pio + PIO_IDR); + __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR)); + __raw_writel(mask, pio + PIO_ODR); + __raw_writel(mask, pio + PIO_PER); + return 0; +} +EXPORT_SYMBOL(at91_set_gpio_input); + + +/* + * mux the pin to the gpio controller (instead of "A" or "B" peripheral), + * and configure it for an output. + */ +int __init_or_module at91_set_gpio_output(unsigned pin, int value) +{ + void __iomem *pio = pin_to_controller(pin); + unsigned mask = pin_to_mask(pin); + + if (!pio) + return -EINVAL; + + __raw_writel(mask, pio + PIO_IDR); + __raw_writel(mask, pio + PIO_PUDR); + __raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR)); + __raw_writel(mask, pio + PIO_OER); + __raw_writel(mask, pio + PIO_PER); + return 0; +} +EXPORT_SYMBOL(at91_set_gpio_output); + + +/* + * enable/disable the glitch filter; mostly used with IRQ handling. + */ +int __init_or_module at91_set_deglitch(unsigned pin, int is_on) +{ + void __iomem *pio = pin_to_controller(pin); + unsigned mask = pin_to_mask(pin); + + if (!pio) + return -EINVAL; + __raw_writel(mask, pio + (is_on ? PIO_IFER : PIO_IFDR)); + return 0; +} +EXPORT_SYMBOL(at91_set_deglitch); + +/* + * enable/disable the multi-driver; This is only valid for output and + * allows the output pin to run as an open collector output. + */ +int __init_or_module at91_set_multi_drive(unsigned pin, int is_on) +{ + void __iomem *pio = pin_to_controller(pin); + unsigned mask = pin_to_mask(pin); + + if (!pio) + return -EINVAL; + + __raw_writel(mask, pio + (is_on ? PIO_MDER : PIO_MDDR)); + return 0; +} +EXPORT_SYMBOL(at91_set_multi_drive); + +/*--------------------------------------------------------------------------*/ + +/* + * assuming the pin is muxed as a gpio output, set its value. + */ +int at91_set_gpio_value(unsigned pin, int value) +{ + void __iomem *pio = pin_to_controller(pin); + unsigned mask = pin_to_mask(pin); + + if (!pio) + return -EINVAL; + __raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR)); + return 0; +} +EXPORT_SYMBOL(at91_set_gpio_value); + + +/* + * read the pin's value (works even if it's not muxed as a gpio). + */ +int at91_get_gpio_value(unsigned pin) +{ + void __iomem *pio = pin_to_controller(pin); + unsigned mask = pin_to_mask(pin); + u32 pdsr; + + if (!pio) + return -EINVAL; + pdsr = __raw_readl(pio + PIO_PDSR); + return (pdsr & mask) != 0; +} +EXPORT_SYMBOL(at91_get_gpio_value); + +/*--------------------------------------------------------------------------*/ + +#ifdef CONFIG_PM + +static u32 wakeups[MAX_GPIO_BANKS]; +static u32 backups[MAX_GPIO_BANKS]; + +static int gpio_irq_set_wake(unsigned pin, unsigned state) +{ + unsigned mask = pin_to_mask(pin); + unsigned bank = (pin - PIN_BASE) / 32; + + if (unlikely(bank >= MAX_GPIO_BANKS)) + return -EINVAL; + + if (state) + wakeups[bank] |= mask; + else + wakeups[bank] &= ~mask; + + set_irq_wake(gpio[bank].id, state); + + return 0; +} + +void at91_gpio_suspend(void) +{ + int i; + + for (i = 0; i < gpio_banks; i++) { + u32 pio = gpio[i].offset; + + backups[i] = at91_sys_read(pio + PIO_IMR); + at91_sys_write(pio + PIO_IDR, backups[i]); + at91_sys_write(pio + PIO_IER, wakeups[i]); + + if (!wakeups[i]) + clk_disable(gpio[i].clock); + else { +#ifdef CONFIG_PM_DEBUG + printk(KERN_DEBUG "GPIO-%c may wake for %08x\n", 'A'+i, wakeups[i]); +#endif + } + } +} + +void at91_gpio_resume(void) +{ + int i; + + for (i = 0; i < gpio_banks; i++) { + u32 pio = gpio[i].offset; + + if (!wakeups[i]) + clk_enable(gpio[i].clock); + + at91_sys_write(pio + PIO_IDR, wakeups[i]); + at91_sys_write(pio + PIO_IER, backups[i]); + } +} + +#else +#define gpio_irq_set_wake NULL +#endif + + +/* Several AIC controller irqs are dispatched through this GPIO handler. + * To use any AT91_PIN_* as an externally triggered IRQ, first call + * at91_set_gpio_input() then maybe enable its glitch filter. + * Then just request_irq() with the pin ID; it works like any ARM IRQ + * handler, though it always triggers on rising and falling edges. + * + * Alternatively, certain pins may be used directly as IRQ0..IRQ6 after + * configuring them with at91_set_a_periph() or at91_set_b_periph(). + * IRQ0..IRQ6 should be configurable, e.g. level vs edge triggering. + */ + +static void gpio_irq_mask(unsigned pin) +{ + void __iomem *pio = pin_to_controller(pin); + unsigned mask = pin_to_mask(pin); + + if (pio) + __raw_writel(mask, pio + PIO_IDR); +} + +static void gpio_irq_unmask(unsigned pin) +{ + void __iomem *pio = pin_to_controller(pin); + unsigned mask = pin_to_mask(pin); + + if (pio) + __raw_writel(mask, pio + PIO_IER); +} + +static int gpio_irq_type(unsigned pin, unsigned type) +{ + return (type == IRQT_BOTHEDGE) ? 0 : -EINVAL; +} + +static struct irq_chip gpio_irqchip = { + .name = "GPIO", + .mask = gpio_irq_mask, + .unmask = gpio_irq_unmask, + .set_type = gpio_irq_type, + .set_wake = gpio_irq_set_wake, +}; + +static void gpio_irq_handler(unsigned irq, struct irq_desc *desc) +{ + unsigned pin; + struct irq_desc *gpio; + void __iomem *pio; + u32 isr; + + pio = get_irq_chip_data(irq); + + /* temporarily mask (level sensitive) parent IRQ */ + desc->chip->ack(irq); + for (;;) { + /* reading ISR acks the pending (edge triggered) GPIO interrupt */ + isr = __raw_readl(pio + PIO_ISR) & __raw_readl(pio + PIO_IMR); + if (!isr) + break; + + pin = (unsigned) get_irq_data(irq); + gpio = &irq_desc[pin]; + + while (isr) { + if (isr & 1) { + if (unlikely(gpio->depth)) { + /* + * The core ARM interrupt handler lazily disables IRQs so + * another IRQ must be generated before it actually gets + * here to be disabled on the GPIO controller. + */ + gpio_irq_mask(pin); + } + else + desc_handle_irq(pin, gpio); + } + pin++; + gpio++; + isr >>= 1; + } + } + desc->chip->unmask(irq); + /* now it may re-trigger */ +} + +/*--------------------------------------------------------------------------*/ + +/* + * Called from the processor-specific init to enable GPIO interrupt support. + */ +void __init at91_gpio_irq_setup(void) +{ + unsigned pioc, pin; + + for (pioc = 0, pin = PIN_BASE; + pioc < gpio_banks; + pioc++) { + void __iomem *controller; + unsigned id = gpio[pioc].id; + unsigned i; + + clk_enable(gpio[pioc].clock); /* enable PIO controller's clock */ + + controller = (void __iomem *) AT91_VA_BASE_SYS + gpio[pioc].offset; + __raw_writel(~0, controller + PIO_IDR); + + set_irq_data(id, (void *) pin); + set_irq_chip_data(id, controller); + + for (i = 0; i < 32; i++, pin++) { + /* + * Can use the "simple" and not "edge" handler since it's + * shorter, and the AIC handles interupts sanely. + */ + set_irq_chip(pin, &gpio_irqchip); + set_irq_handler(pin, handle_simple_irq); + set_irq_flags(pin, IRQF_VALID); + } + + set_irq_chained_handler(id, gpio_irq_handler); + } + pr_info("AT91: %d gpio irqs in %d banks\n", pin - PIN_BASE, gpio_banks); +} + +/* + * Called from the processor-specific init to enable GPIO pin support. + */ +void __init at91_gpio_init(struct at91_gpio_bank *data, int nr_banks) +{ + BUG_ON(nr_banks > MAX_GPIO_BANKS); + + gpio = data; + gpio_banks = nr_banks; +} -- cgit v1.2.3