From ea23d1ac7e380aefc00d691c7c9a3e747bc2531f Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Sat, 25 Jun 2005 16:58:21 +0100 Subject: [PATCH] ARM: 2750/1: add i2c platform device for enp2611 on-board i2c bus Patch from Lennert Buytenhek On the enp2611, GPIO 7 and 6 are connected to an on-board i2c bus that attaches to the SODIMM module slot (for SPD) and an LM84 temperature sensor. Add a platform device for this i2c bus. Signed-off-by: Lennert Buytenhek Signed-off-by: Russell King --- arch/arm/mach-ixp2000/enp2611.c | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-) (limited to 'arch/arm/mach-ixp2000') diff --git a/arch/arm/mach-ixp2000/enp2611.c b/arch/arm/mach-ixp2000/enp2611.c index 04b38bcf9aa..f3a291b6a9f 100644 --- a/arch/arm/mach-ixp2000/enp2611.c +++ b/arch/arm/mach-ixp2000/enp2611.c @@ -197,8 +197,23 @@ static struct platform_device enp2611_flash = { .resource = &enp2611_flash_resource, }; +static struct ixp2000_i2c_pins enp2611_i2c_gpio_pins = { + .sda_pin = ENP2611_GPIO_SDA, + .scl_pin = ENP2611_GPIO_SCL, +}; + +static struct platform_device enp2611_i2c_controller = { + .name = "IXP2000-I2C", + .id = 0, + .dev = { + .platform_data = &enp2611_i2c_gpio_pins + }, + .num_resources = 0 +}; + static struct platform_device *enp2611_devices[] __initdata = { - &enp2611_flash + &enp2611_flash, + &enp2611_i2c_controller }; static void __init enp2611_init_machine(void) -- cgit v1.2.3