From bdf82b59c5dcf04bbdbd1938eefca14dd9cb44d3 Mon Sep 17 00:00:00 2001 From: Deepak Saxena Date: Mon, 29 Aug 2005 22:46:30 +0100 Subject: [ARM] 2836/1: Cleanup IXP4xx GPIO code Patch from Deepak Saxena This patch implements the set_irq_type() hooks for configuring GPIO IRQ type and updates all the platforms to use it instead of the gpio_line_config() function which is now used to configure input vs. output on the pins. Signed-off-by: Deepak Saxena Signed-off-by: Russell King --- arch/arm/mach-ixp4xx/common.c | 155 +++++++++++++++--------------------- arch/arm/mach-ixp4xx/coyote-pci.c | 7 +- arch/arm/mach-ixp4xx/gtwx5715-pci.c | 28 +++---- arch/arm/mach-ixp4xx/ixdp425-pci.c | 12 +-- arch/arm/mach-ixp4xx/ixdpg425-pci.c | 4 +- 5 files changed, 84 insertions(+), 122 deletions(-) (limited to 'arch/arm/mach-ixp4xx') diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c index 04490a9f8f6..0422e906cc9 100644 --- a/arch/arm/mach-ixp4xx/common.c +++ b/arch/arm/mach-ixp4xx/common.c @@ -38,90 +38,6 @@ #include #include -enum ixp4xx_irq_type { - IXP4XX_IRQ_LEVEL, IXP4XX_IRQ_EDGE -}; -static void ixp4xx_config_irq(unsigned irq, enum ixp4xx_irq_type type); - -/************************************************************************* - * GPIO acces functions - *************************************************************************/ - -/* - * Configure GPIO line for input, interrupt, or output operation - * - * TODO: Enable/disable the irq_desc based on interrupt or output mode. - * TODO: Should these be named ixp4xx_gpio_? - */ -void gpio_line_config(u8 line, u32 style) -{ - static const int gpio2irq[] = { - 6, 7, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29 - }; - u32 enable; - volatile u32 *int_reg; - u32 int_style; - enum ixp4xx_irq_type irq_type; - - enable = *IXP4XX_GPIO_GPOER; - - if (style & IXP4XX_GPIO_OUT) { - enable &= ~((1) << line); - } else if (style & IXP4XX_GPIO_IN) { - enable |= ((1) << line); - - switch (style & IXP4XX_GPIO_INTSTYLE_MASK) - { - case (IXP4XX_GPIO_ACTIVE_HIGH): - int_style = IXP4XX_GPIO_STYLE_ACTIVE_HIGH; - irq_type = IXP4XX_IRQ_LEVEL; - break; - case (IXP4XX_GPIO_ACTIVE_LOW): - int_style = IXP4XX_GPIO_STYLE_ACTIVE_LOW; - irq_type = IXP4XX_IRQ_LEVEL; - break; - case (IXP4XX_GPIO_RISING_EDGE): - int_style = IXP4XX_GPIO_STYLE_RISING_EDGE; - irq_type = IXP4XX_IRQ_EDGE; - break; - case (IXP4XX_GPIO_FALLING_EDGE): - int_style = IXP4XX_GPIO_STYLE_FALLING_EDGE; - irq_type = IXP4XX_IRQ_EDGE; - break; - case (IXP4XX_GPIO_TRANSITIONAL): - int_style = IXP4XX_GPIO_STYLE_TRANSITIONAL; - irq_type = IXP4XX_IRQ_EDGE; - break; - default: - int_style = IXP4XX_GPIO_STYLE_ACTIVE_HIGH; - irq_type = IXP4XX_IRQ_LEVEL; - break; - } - - if (style & IXP4XX_GPIO_INTSTYLE_MASK) - ixp4xx_config_irq(gpio2irq[line], irq_type); - - if (line >= 8) { /* pins 8-15 */ - line -= 8; - int_reg = IXP4XX_GPIO_GPIT2R; - } - else { /* pins 0-7 */ - int_reg = IXP4XX_GPIO_GPIT1R; - } - - /* Clear the style for the appropriate pin */ - *int_reg &= ~(IXP4XX_GPIO_STYLE_CLEAR << - (line * IXP4XX_GPIO_STYLE_SIZE)); - - /* Set the new style */ - *int_reg |= (int_style << (line * IXP4XX_GPIO_STYLE_SIZE)); - } - - *IXP4XX_GPIO_GPOER = enable; -} - -EXPORT_SYMBOL(gpio_line_config); - /************************************************************************* * IXP4xx chipset I/O mapping *************************************************************************/ @@ -165,6 +81,69 @@ void __init ixp4xx_map_io(void) * (be it PCI or something else) configures that GPIO line * as an IRQ. **************************************************************************/ +enum ixp4xx_irq_type { + IXP4XX_IRQ_LEVEL, IXP4XX_IRQ_EDGE +}; + +static void ixp4xx_config_irq(unsigned irq, enum ixp4xx_irq_type type); + +/* + * IRQ -> GPIO mapping table + */ +static int irq2gpio[32] = { + -1, -1, -1, -1, -1, -1, 0, 1, + -1, -1, -1, -1, -1, -1, -1, -1, + -1, -1, -1, 2, 3, 4, 5, 6, + 7, 8, 9, 10, 11, 12, -1, -1, +}; + +static int ixp4xx_set_irq_type(unsigned int irq, unsigned int type) +{ + int line = irq2gpio[irq]; + u32 int_style; + enum ixp4xx_irq_type irq_type; + volatile u32 *int_reg; + + /* + * Only for GPIO IRQs + */ + if (line < 0) + return -EINVAL; + + if (type & IRQT_BOTHEDGE) { + int_style = IXP4XX_GPIO_STYLE_TRANSITIONAL; + irq_type = IXP4XX_IRQ_EDGE; + } else if (type & IRQT_RISING) { + int_style = IXP4XX_GPIO_STYLE_RISING_EDGE; + irq_type = IXP4XX_IRQ_EDGE; + } else if (type & IRQT_FALLING) { + int_style = IXP4XX_GPIO_STYLE_FALLING_EDGE; + irq_type = IXP4XX_IRQ_EDGE; + } else if (type & IRQT_HIGH) { + int_style = IXP4XX_GPIO_STYLE_ACTIVE_HIGH; + irq_type = IXP4XX_IRQ_LEVEL; + } else if (type & IRQT_LOW) { + int_style = IXP4XX_GPIO_STYLE_ACTIVE_LOW; + irq_type = IXP4XX_IRQ_LEVEL; + } + + ixp4xx_config_irq(irq, irq_type); + + if (line >= 8) { /* pins 8-15 */ + line -= 8; + int_reg = IXP4XX_GPIO_GPIT2R; + } else { /* pins 0-7 */ + int_reg = IXP4XX_GPIO_GPIT1R; + } + + /* Clear the style for the appropriate pin */ + *int_reg &= ~(IXP4XX_GPIO_STYLE_CLEAR << + (line * IXP4XX_GPIO_STYLE_SIZE)); + + /* Set the new style */ + *int_reg |= (int_style << (line * IXP4XX_GPIO_STYLE_SIZE)); +} + static void ixp4xx_irq_mask(unsigned int irq) { if (cpu_is_ixp46x() && irq >= 32) @@ -183,12 +162,6 @@ static void ixp4xx_irq_unmask(unsigned int irq) static void ixp4xx_irq_ack(unsigned int irq) { - static int irq2gpio[32] = { - -1, -1, -1, -1, -1, -1, 0, 1, - -1, -1, -1, -1, -1, -1, -1, -1, - -1, -1, -1, 2, 3, 4, 5, 6, - 7, 8, 9, 10, 11, 12, -1, -1, - }; int line = (irq < 32) ? irq2gpio[irq] : -1; if (line >= 0) @@ -209,12 +182,14 @@ static struct irqchip ixp4xx_irq_level_chip = { .ack = ixp4xx_irq_mask, .mask = ixp4xx_irq_mask, .unmask = ixp4xx_irq_level_unmask, + .type = ixp4xx_set_irq_type }; static struct irqchip ixp4xx_irq_edge_chip = { .ack = ixp4xx_irq_ack, .mask = ixp4xx_irq_mask, .unmask = ixp4xx_irq_unmask, + .type = ixp4xx_set_irq_type }; static void ixp4xx_config_irq(unsigned irq, enum ixp4xx_irq_type type) diff --git a/arch/arm/mach-ixp4xx/coyote-pci.c b/arch/arm/mach-ixp4xx/coyote-pci.c index afafb42ae12..60de8a94cff 100644 --- a/arch/arm/mach-ixp4xx/coyote-pci.c +++ b/arch/arm/mach-ixp4xx/coyote-pci.c @@ -30,11 +30,8 @@ extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys); void __init coyote_pci_preinit(void) { - gpio_line_config(COYOTE_PCI_SLOT0_PIN, - IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_LOW); - - gpio_line_config(COYOTE_PCI_SLOT1_PIN, - IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_LOW); + set_irq_type(IRQ_COYOTE_PCI_SLOT0, IRQT_LOW); + set_irq_type(IRQ_COYOTE_PCI_SLOT1, IRQT_LOW); gpio_line_isr_clear(COYOTE_PCI_SLOT0_PIN); gpio_line_isr_clear(COYOTE_PCI_SLOT1_PIN); diff --git a/arch/arm/mach-ixp4xx/gtwx5715-pci.c b/arch/arm/mach-ixp4xx/gtwx5715-pci.c index b18035824e3..a66484b63d3 100644 --- a/arch/arm/mach-ixp4xx/gtwx5715-pci.c +++ b/arch/arm/mach-ixp4xx/gtwx5715-pci.c @@ -35,26 +35,20 @@ extern void ixp4xx_pci_preinit(void); extern int ixp4xx_setup(int nr, struct pci_sys_data *sys); extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys); - /* - * The exact GPIO pins and IRQs are defined in arch-ixp4xx/gtwx5715.h - * Slot 0 isn't actually populated with a card connector but - * we initialize it anyway in case a future version has the - * slot populated or someone with good soldering skills has - * some free time. - */ - - -static void gtwx5715_init_gpio(u8 pin, u32 style) -{ - gpio_line_config(pin, style | IXP4XX_GPIO_ACTIVE_LOW); - - if (style & IXP4XX_GPIO_IN) gpio_line_isr_clear(pin); -} +/* + * The exact GPIO pins and IRQs are defined in arch-ixp4xx/gtwx5715.h + * Slot 0 isn't actually populated with a card connector but + * we initialize it anyway in case a future version has the + * slot populated or someone with good soldering skills has + * some free time. + */ void __init gtwx5715_pci_preinit(void) { - gtwx5715_init_gpio(GTWX5715_PCI_SLOT0_INTA_GPIO, IXP4XX_GPIO_IN); - gtwx5715_init_gpio(GTWX5715_PCI_SLOT1_INTA_GPIO, IXP4XX_GPIO_IN); + set_irq_type(GTWX5715_PCI_SLOT0_INTA_IRQ, IRQT_LOW); + set_irq_type(GTWX5715_PCI_SLOT0_INTB_IRQ, IRQT_LOW); + set_irq_type(GTWX5715_PCI_SLOT1_INTA_IRQ, IRQT_LOW); + set_irq_type(GTWX5715_PCI_SLOT1_INTB_IRQ, IRQT_LOW); ixp4xx_pci_preinit(); } diff --git a/arch/arm/mach-ixp4xx/ixdp425-pci.c b/arch/arm/mach-ixp4xx/ixdp425-pci.c index c2ab9ebb598..f9a1d3e7d69 100644 --- a/arch/arm/mach-ixp4xx/ixdp425-pci.c +++ b/arch/arm/mach-ixp4xx/ixdp425-pci.c @@ -27,14 +27,10 @@ void __init ixdp425_pci_preinit(void) { - gpio_line_config(IXDP425_PCI_INTA_PIN, - IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_LOW); - gpio_line_config(IXDP425_PCI_INTB_PIN, - IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_LOW); - gpio_line_config(IXDP425_PCI_INTC_PIN, - IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_LOW); - gpio_line_config(IXDP425_PCI_INTD_PIN, - IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_LOW); + set_irq_type(IRQ_IXDP425_PCI_INTA, IRQT_LOW); + set_irq_type(IRQ_IXDP425_PCI_INTB, IRQT_LOW); + set_irq_type(IRQ_IXDP425_PCI_INTC, IRQT_LOW); + set_irq_type(IRQ_IXDP425_PCI_INTD, IRQT_LOW); gpio_line_isr_clear(IXDP425_PCI_INTA_PIN); gpio_line_isr_clear(IXDP425_PCI_INTB_PIN); diff --git a/arch/arm/mach-ixp4xx/ixdpg425-pci.c b/arch/arm/mach-ixp4xx/ixdpg425-pci.c index ce4563f0067..fe5e7660de1 100644 --- a/arch/arm/mach-ixp4xx/ixdpg425-pci.c +++ b/arch/arm/mach-ixp4xx/ixdpg425-pci.c @@ -29,8 +29,8 @@ extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys); void __init ixdpg425_pci_preinit(void) { - gpio_line_config(6, IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_LOW); - gpio_line_config(7, IXP4XX_GPIO_IN | IXP4XX_GPIO_ACTIVE_LOW); + set_irq_type(IRQ_IXP4XX_GPIO6, IRQT_LOW); + set_irq_type(IRQ_IXP4XX_GPIO7, IRQT_LOW); gpio_line_isr_clear(6); gpio_line_isr_clear(7); -- cgit v1.2.3