From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- arch/arm/mm/proc-xscale.S | 934 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 934 insertions(+) create mode 100644 arch/arm/mm/proc-xscale.S (limited to 'arch/arm/mm/proc-xscale.S') diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S new file mode 100644 index 00000000000..2d977b4eeea --- /dev/null +++ b/arch/arm/mm/proc-xscale.S @@ -0,0 +1,934 @@ +/* + * linux/arch/arm/mm/proc-xscale.S + * + * Author: Nicolas Pitre + * Created: November 2000 + * Copyright: (C) 2000, 2001 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * MMU functions for the Intel XScale CPUs + * + * 2001 Aug 21: + * some contributions by Brett Gaines + * Copyright 2001 by Intel Corp. + * + * 2001 Sep 08: + * Completely revisited, many important fixes + * Nicolas Pitre + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include "proc-macros.S" + +/* + * This is the maximum size of an area which will be flushed. If the area + * is larger than this, then we flush the whole cache + */ +#define MAX_AREA_SIZE 32768 + +/* + * the cache line size of the I and D cache + */ +#define CACHELINESIZE 32 + +/* + * the size of the data cache + */ +#define CACHESIZE 32768 + +/* + * Virtual address used to allocate the cache when flushed + * + * This must be an address range which is _never_ used. It should + * apparently have a mapping in the corresponding page table for + * compatibility with future CPUs that _could_ require it. For instance we + * don't care. + * + * This must be aligned on a 2*CACHESIZE boundary. The code selects one of + * the 2 areas in alternance each time the clean_d_cache macro is used. + * Without this the XScale core exhibits cache eviction problems and no one + * knows why. + * + * Reminder: the vector table is located at 0xffff0000-0xffff0fff. + */ +#define CLEAN_ADDR 0xfffe0000 + +/* + * This macro is used to wait for a CP15 write and is needed + * when we have to ensure that the last operation to the co-pro + * was completed before continuing with operation. + */ + .macro cpwait, rd + mrc p15, 0, \rd, c2, c0, 0 @ arbitrary read of cp15 + mov \rd, \rd @ wait for completion + sub pc, pc, #4 @ flush instruction pipeline + .endm + + .macro cpwait_ret, lr, rd + mrc p15, 0, \rd, c2, c0, 0 @ arbitrary read of cp15 + sub pc, \lr, \rd, LSR #32 @ wait for completion and + @ flush instruction pipeline + .endm + +/* + * This macro cleans the entire dcache using line allocate. + * The main loop has been unrolled to reduce loop overhead. + * rd and rs are two scratch registers. + */ + .macro clean_d_cache, rd, rs + ldr \rs, =clean_addr + ldr \rd, [\rs] + eor \rd, \rd, #CACHESIZE + str \rd, [\rs] + add \rs, \rd, #CACHESIZE +1: mcr p15, 0, \rd, c7, c2, 5 @ allocate D cache line + add \rd, \rd, #CACHELINESIZE + mcr p15, 0, \rd, c7, c2, 5 @ allocate D cache line + add \rd, \rd, #CACHELINESIZE + mcr p15, 0, \rd, c7, c2, 5 @ allocate D cache line + add \rd, \rd, #CACHELINESIZE + mcr p15, 0, \rd, c7, c2, 5 @ allocate D cache line + add \rd, \rd, #CACHELINESIZE + teq \rd, \rs + bne 1b + .endm + + .data +clean_addr: .word CLEAN_ADDR + + .text + +/* + * cpu_xscale_proc_init() + * + * Nothing too exciting at the moment + */ +ENTRY(cpu_xscale_proc_init) + mov pc, lr + +/* + * cpu_xscale_proc_fin() + */ +ENTRY(cpu_xscale_proc_fin) + str lr, [sp, #-4]! + mov r0, #PSR_F_BIT|PSR_I_BIT|SVC_MODE + msr cpsr_c, r0 + bl xscale_flush_kern_cache_all @ clean caches + mrc p15, 0, r0, c1, c0, 0 @ ctrl register + bic r0, r0, #0x1800 @ ...IZ........... + bic r0, r0, #0x0006 @ .............CA. + mcr p15, 0, r0, c1, c0, 0 @ disable caches + ldr pc, [sp], #4 + +/* + * cpu_xscale_reset(loc) + * + * Perform a soft reset of the system. Put the CPU into the + * same state as it would be if it had been reset, and branch + * to what would be the reset vector. + * + * loc: location to jump to for soft reset + */ + .align 5 +ENTRY(cpu_xscale_reset) + mov r1, #PSR_F_BIT|PSR_I_BIT|SVC_MODE + msr cpsr_c, r1 @ reset CPSR + mrc p15, 0, r1, c1, c0, 0 @ ctrl register + bic r1, r1, #0x0086 @ ........B....CA. + bic r1, r1, #0x3900 @ ..VIZ..S........ + mcr p15, 0, r1, c1, c0, 0 @ ctrl register + mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches & BTB + bic r1, r1, #0x0001 @ ...............M + mcr p15, 0, r1, c1, c0, 0 @ ctrl register + @ CAUTION: MMU turned off from this point. We count on the pipeline + @ already containing those two last instructions to survive. + mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs + mov pc, r0 + +/* + * cpu_xscale_do_idle() + * + * Cause the processor to idle + * + * For now we do nothing but go to idle mode for every case + * + * XScale supports clock switching, but using idle mode support + * allows external hardware to react to system state changes. + */ + .align 5 + +ENTRY(cpu_xscale_do_idle) + mov r0, #1 + mcr p14, 0, r0, c7, c0, 0 @ Go to IDLE + mov pc, lr + +/* ================================= CACHE ================================ */ + +/* + * flush_user_cache_all() + * + * Invalidate all cache entries in a particular address + * space. + */ +ENTRY(xscale_flush_user_cache_all) + /* FALLTHROUGH */ + +/* + * flush_kern_cache_all() + * + * Clean and invalidate the entire cache. + */ +ENTRY(xscale_flush_kern_cache_all) + mov r2, #VM_EXEC + mov ip, #0 +__flush_whole_cache: + clean_d_cache r0, r1 + tst r2, #VM_EXEC + mcrne p15, 0, ip, c7, c5, 0 @ Invalidate I cache & BTB + mcrne p15, 0, ip, c7, c10, 4 @ Drain Write (& Fill) Buffer + mov pc, lr + +/* + * flush_user_cache_range(start, end, vm_flags) + * + * Invalidate a range of cache entries in the specified + * address space. + * + * - start - start address (may not be aligned) + * - end - end address (exclusive, may not be aligned) + * - vma - vma_area_struct describing address space + */ + .align 5 +ENTRY(xscale_flush_user_cache_range) + mov ip, #0 + sub r3, r1, r0 @ calculate total size + cmp r3, #MAX_AREA_SIZE + bhs __flush_whole_cache + +1: tst r2, #VM_EXEC + mcrne p15, 0, r0, c7, c5, 1 @ Invalidate I cache line + mcr p15, 0, r0, c7, c10, 1 @ Clean D cache line + mcr p15, 0, r0, c7, c6, 1 @ Invalidate D cache line + add r0, r0, #CACHELINESIZE + cmp r0, r1 + blo 1b + tst r2, #VM_EXEC + mcrne p15, 0, ip, c7, c5, 6 @ Invalidate BTB + mcrne p15, 0, ip, c7, c10, 4 @ Drain Write (& Fill) Buffer + mov pc, lr + +/* + * coherent_kern_range(start, end) + * + * Ensure coherency between the Icache and the Dcache in the + * region described by start. If you have non-snooping + * Harvard caches, you need to implement this function. + * + * - start - virtual start address + * - end - virtual end address + * + * Note: single I-cache line invalidation isn't used here since + * it also trashes the mini I-cache used by JTAG debuggers. + */ +ENTRY(xscale_coherent_kern_range) + /* FALLTHROUGH */ + +/* + * coherent_user_range(start, end) + * + * Ensure coherency between the Icache and the Dcache in the + * region described by start. If you have non-snooping + * Harvard caches, you need to implement this function. + * + * - start - virtual start address + * - end - virtual end address + * + * Note: single I-cache line invalidation isn't used here since + * it also trashes the mini I-cache used by JTAG debuggers. + */ +ENTRY(xscale_coherent_user_range) + bic r0, r0, #CACHELINESIZE - 1 +1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry + add r0, r0, #CACHELINESIZE + cmp r0, r1 + blo 1b + mov r0, #0 + mcr p15, 0, r0, c7, c5, 0 @ Invalidate I cache & BTB + mcr p15, 0, r0, c7, c10, 4 @ Drain Write (& Fill) Buffer + mov pc, lr + +/* + * flush_kern_dcache_page(void *page) + * + * Ensure no D cache aliasing occurs, either with itself or + * the I cache + * + * - addr - page aligned address + */ +ENTRY(xscale_flush_kern_dcache_page) + add r1, r0, #PAGE_SZ +1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry + mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry + add r0, r0, #CACHELINESIZE + cmp r0, r1 + blo 1b + mov r0, #0 + mcr p15, 0, r0, c7, c5, 0 @ Invalidate I cache & BTB + mcr p15, 0, r0, c7, c10, 4 @ Drain Write (& Fill) Buffer + mov pc, lr + +/* + * dma_inv_range(start, end) + * + * Invalidate (discard) the specified virtual address range. + * May not write back any entries. If 'start' or 'end' + * are not cache line aligned, those lines must be written + * back. + * + * - start - virtual start address + * - end - virtual end address + */ +ENTRY(xscale_dma_inv_range) + mrc p15, 0, r2, c0, c0, 0 @ read ID + eor r2, r2, #0x69000000 + eor r2, r2, #0x00052000 + bics r2, r2, #1 + beq xscale_dma_flush_range + + tst r0, #CACHELINESIZE - 1 + bic r0, r0, #CACHELINESIZE - 1 + mcrne p15, 0, r0, c7, c10, 1 @ clean D entry + tst r1, #CACHELINESIZE - 1 + mcrne p15, 0, r1, c7, c10, 1 @ clean D entry +1: mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry + add r0, r0, #CACHELINESIZE + cmp r0, r1 + blo 1b + mcr p15, 0, r0, c7, c10, 4 @ Drain Write (& Fill) Buffer + mov pc, lr + +/* + * dma_clean_range(start, end) + * + * Clean the specified virtual address range. + * + * - start - virtual start address + * - end - virtual end address + */ +ENTRY(xscale_dma_clean_range) + bic r0, r0, #CACHELINESIZE - 1 +1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry + add r0, r0, #CACHELINESIZE + cmp r0, r1 + blo 1b + mcr p15, 0, r0, c7, c10, 4 @ Drain Write (& Fill) Buffer + mov pc, lr + +/* + * dma_flush_range(start, end) + * + * Clean and invalidate the specified virtual address range. + * + * - start - virtual start address + * - end - virtual end address + */ +ENTRY(xscale_dma_flush_range) + bic r0, r0, #CACHELINESIZE - 1 +1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry + mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry + add r0, r0, #CACHELINESIZE + cmp r0, r1 + blo 1b + mcr p15, 0, r0, c7, c10, 4 @ Drain Write (& Fill) Buffer + mov pc, lr + +ENTRY(xscale_cache_fns) + .long xscale_flush_kern_cache_all + .long xscale_flush_user_cache_all + .long xscale_flush_user_cache_range + .long xscale_coherent_kern_range + .long xscale_coherent_user_range + .long xscale_flush_kern_dcache_page + .long xscale_dma_inv_range + .long xscale_dma_clean_range + .long xscale_dma_flush_range + +ENTRY(cpu_xscale_dcache_clean_area) +1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry + add r0, r0, #CACHELINESIZE + subs r1, r1, #CACHELINESIZE + bhi 1b + mov pc, lr + +/* ================================ CACHE LOCKING============================ + * + * The XScale MicroArchitecture implements support for locking entries into + * the data and instruction cache. The following functions implement the core + * low level instructions needed to accomplish the locking. The developer's + * manual states that the code that performs the locking must be in non-cached + * memory. To accomplish this, the code in xscale-cache-lock.c copies the + * following functions from the cache into a non-cached memory region that + * is allocated through consistent_alloc(). + * + */ + .align 5 +/* + * xscale_icache_lock + * + * r0: starting address to lock + * r1: end address to lock + */ +ENTRY(xscale_icache_lock) + +iLockLoop: + bic r0, r0, #CACHELINESIZE - 1 + mcr p15, 0, r0, c9, c1, 0 @ lock into cache + cmp r0, r1 @ are we done? + add r0, r0, #CACHELINESIZE @ advance to next cache line + bls iLockLoop + mov pc, lr + +/* + * xscale_icache_unlock + */ +ENTRY(xscale_icache_unlock) + mcr p15, 0, r0, c9, c1, 1 @ Unlock icache + mov pc, lr + +/* + * xscale_dcache_lock + * + * r0: starting address to lock + * r1: end address to lock + */ +ENTRY(xscale_dcache_lock) + mcr p15, 0, ip, c7, c10, 4 @ Drain Write (& Fill) Buffer + mov r2, #1 + mcr p15, 0, r2, c9, c2, 0 @ Put dcache in lock mode + cpwait ip @ Wait for completion + + mrs r2, cpsr + orr r3, r2, #PSR_F_BIT | PSR_I_BIT +dLockLoop: + msr cpsr_c, r3 + mcr p15, 0, r0, c7, c10, 1 @ Write back line if it is dirty + mcr p15, 0, r0, c7, c6, 1 @ Flush/invalidate line + msr cpsr_c, r2 + ldr ip, [r0], #CACHELINESIZE @ Preload 32 bytes into cache from + @ location [r0]. Post-increment + @ r3 to next cache line + cmp r0, r1 @ Are we done? + bls dLockLoop + + mcr p15, 0, ip, c7, c10, 4 @ Drain Write (& Fill) Buffer + mov r2, #0 + mcr p15, 0, r2, c9, c2, 0 @ Get out of lock mode + cpwait_ret lr, ip + +/* + * xscale_dcache_unlock + */ +ENTRY(xscale_dcache_unlock) + mcr p15, 0, ip, c7, c10, 4 @ Drain Write (& Fill) Buffer + mcr p15, 0, ip, c9, c2, 1 @ Unlock cache + mov pc, lr + +/* + * Needed to determine the length of the code that needs to be copied. + */ + .align 5 +ENTRY(xscale_cache_dummy) + mov pc, lr + +/* ================================ TLB LOCKING============================== + * + * The XScale MicroArchitecture implements support for locking entries into + * the Instruction and Data TLBs. The following functions provide the + * low level support for supporting these under Linux. xscale-lock.c + * implements some higher level management code. Most of the following + * is taken straight out of the Developer's Manual. + */ + +/* + * Lock I-TLB entry + * + * r0: Virtual address to translate and lock + */ + .align 5 +ENTRY(xscale_itlb_lock) + mrs r2, cpsr + orr r3, r2, #PSR_F_BIT | PSR_I_BIT + msr cpsr_c, r3 @ Disable interrupts + mcr p15, 0, r0, c8, c5, 1 @ Invalidate I-TLB entry + mcr p15, 0, r0, c10, c4, 0 @ Translate and lock + msr cpsr_c, r2 @ Restore interrupts + cpwait_ret lr, ip + +/* + * Lock D-TLB entry + * + * r0: Virtual address to translate and lock + */ + .align 5 +ENTRY(xscale_dtlb_lock) + mrs r2, cpsr + orr r3, r2, #PSR_F_BIT | PSR_I_BIT + msr cpsr_c, r3 @ Disable interrupts + mcr p15, 0, r0, c8, c6, 1 @ Invalidate D-TLB entry + mcr p15, 0, r0, c10, c8, 0 @ Translate and lock + msr cpsr_c, r2 @ Restore interrupts + cpwait_ret lr, ip + +/* + * Unlock all I-TLB entries + */ + .align 5 +ENTRY(xscale_itlb_unlock) + mcr p15, 0, ip, c10, c4, 1 @ Unlock I-TLB + mcr p15, 0, ip, c8, c5, 0 @ Invalidate I-TLB + cpwait_ret lr, ip + +/* + * Unlock all D-TLB entries + */ +ENTRY(xscale_dtlb_unlock) + mcr p15, 0, ip, c10, c8, 1 @ Unlock D-TBL + mcr p15, 0, ip, c8, c6, 0 @ Invalidate D-TLB + cpwait_ret lr, ip + +/* =============================== PageTable ============================== */ + +#define PTE_CACHE_WRITE_ALLOCATE 0 + +/* + * cpu_xscale_switch_mm(pgd) + * + * Set the translation base pointer to be as described by pgd. + * + * pgd: new page tables + */ + .align 5 +ENTRY(cpu_xscale_switch_mm) + clean_d_cache r1, r2 + mcr p15, 0, ip, c7, c5, 0 @ Invalidate I cache & BTB + mcr p15, 0, ip, c7, c10, 4 @ Drain Write (& Fill) Buffer + mcr p15, 0, r0, c2, c0, 0 @ load page table pointer + mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs + cpwait_ret lr, ip + +/* + * cpu_xscale_set_pte(ptep, pte) + * + * Set a PTE and flush it out + * + * Errata 40: must set memory to write-through for user read-only pages. + */ + .align 5 +ENTRY(cpu_xscale_set_pte) + str r1, [r0], #-2048 @ linux version + + bic r2, r1, #0xff0 + orr r2, r2, #PTE_TYPE_EXT @ extended page + + eor r3, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY + + tst r3, #L_PTE_USER @ User? + orrne r2, r2, #PTE_EXT_AP_URO_SRW @ yes -> user r/o, system r/w + + tst r3, #L_PTE_WRITE | L_PTE_DIRTY @ Write and Dirty? + orreq r2, r2, #PTE_EXT_AP_UNO_SRW @ yes -> user n/a, system r/w + @ combined with user -> user r/w + + @ + @ Handle the X bit. We want to set this bit for the minicache + @ (U = E = B = W = 0, C = 1) or when write allocate is enabled, + @ and we have a writeable, cacheable region. If we ignore the + @ U and E bits, we can allow user space to use the minicache as + @ well. + @ + @ X = (C & ~W & ~B) | (C & W & B & write_allocate) + @ + eor ip, r1, #L_PTE_CACHEABLE + tst ip, #L_PTE_CACHEABLE | L_PTE_WRITE | L_PTE_BUFFERABLE +#if PTE_CACHE_WRITE_ALLOCATE + eorne ip, r1, #L_PTE_CACHEABLE | L_PTE_WRITE | L_PTE_BUFFERABLE + tstne ip, #L_PTE_CACHEABLE | L_PTE_WRITE | L_PTE_BUFFERABLE +#endif + orreq r2, r2, #PTE_EXT_TEX(1) + + @ + @ Erratum 40: The B bit must be cleared for a user read-only + @ cacheable page. + @ + @ B = B & ~(U & C & ~W) + @ + and ip, r1, #L_PTE_USER | L_PTE_WRITE | L_PTE_CACHEABLE + teq ip, #L_PTE_USER | L_PTE_CACHEABLE + biceq r2, r2, #PTE_BUFFERABLE + + tst r3, #L_PTE_PRESENT | L_PTE_YOUNG @ Present and Young? + movne r2, #0 @ no -> fault + + str r2, [r0] @ hardware version + mov ip, #0 + mcr p15, 0, r0, c7, c10, 1 @ Clean D cache line + mcr p15, 0, ip, c7, c10, 4 @ Drain Write (& Fill) Buffer + mov pc, lr + + + .ltorg + + .align + + __INIT + + .type __xscale_setup, #function +__xscale_setup: + mcr p15, 0, ip, c7, c7, 0 @ invalidate I, D caches & BTB + mcr p15, 0, ip, c7, c10, 4 @ Drain Write (& Fill) Buffer + mcr p15, 0, ip, c8, c7, 0 @ invalidate I, D TLBs +#ifdef CONFIG_IWMMXT + mov r0, #0 @ initially disallow access to CP0/CP1 +#else + mov r0, #1 @ Allow access to CP0 +#endif + orr r0, r0, #1 << 6 @ cp6 for IOP3xx and Bulverde + orr r0, r0, #1 << 13 @ Its undefined whether this + mcr p15, 0, r0, c15, c1, 0 @ affects USR or SVC modes + mrc p15, 0, r0, c1, c0, 0 @ get control register + ldr r5, xscale_cr1_clear + bic r0, r0, r5 + ldr r5, xscale_cr1_set + orr r0, r0, r5 + mov pc, lr + .size __xscale_setup, . - __xscale_setup + + /* + * R + * .RVI ZFRS BLDP WCAM + * ..11 1.01 .... .101 + * + */ + .type xscale_cr1_clear, #object + .type xscale_cr1_set, #object +xscale_cr1_clear: + .word 0x3b07 +xscale_cr1_set: + .word 0x3905 + + __INITDATA + +/* + * Purpose : Function pointers used to access above functions - all calls + * come through these + */ + + .type xscale_processor_functions, #object +ENTRY(xscale_processor_functions) + .word v5t_early_abort + .word cpu_xscale_proc_init + .word cpu_xscale_proc_fin + .word cpu_xscale_reset + .word cpu_xscale_do_idle + .word cpu_xscale_dcache_clean_area + .word cpu_xscale_switch_mm + .word cpu_xscale_set_pte + .size xscale_processor_functions, . - xscale_processor_functions + + .section ".rodata" + + .type cpu_arch_name, #object +cpu_arch_name: + .asciz "armv5te" + .size cpu_arch_name, . - cpu_arch_name + + .type cpu_elf_name, #object +cpu_elf_name: + .asciz "v5" + .size cpu_elf_name, . - cpu_elf_name + + .type cpu_80200_name, #object +cpu_80200_name: + .asciz "XScale-80200" + .size cpu_80200_name, . - cpu_80200_name + + .type cpu_8032x_name, #object +cpu_8032x_name: + .asciz "XScale-IOP8032x Family" + .size cpu_8032x_name, . - cpu_8032x_name + + .type cpu_8033x_name, #object +cpu_8033x_name: + .asciz "XScale-IOP8033x Family" + .size cpu_8033x_name, . - cpu_8033x_name + + .type cpu_pxa250_name, #object +cpu_pxa250_name: + .asciz "XScale-PXA250" + .size cpu_pxa250_name, . - cpu_pxa250_name + + .type cpu_pxa210_name, #object +cpu_pxa210_name: + .asciz "XScale-PXA210" + .size cpu_pxa210_name, . - cpu_pxa210_name + + .type cpu_ixp42x_name, #object +cpu_ixp42x_name: + .asciz "XScale-IXP42x Family" + .size cpu_ixp42x_name, . - cpu_ixp42x_name + + .type cpu_ixp46x_name, #object +cpu_ixp46x_name: + .asciz "XScale-IXP46x Family" + .size cpu_ixp46x_name, . - cpu_ixp46x_name + + .type cpu_ixp2400_name, #object +cpu_ixp2400_name: + .asciz "XScale-IXP2400" + .size cpu_ixp2400_name, . - cpu_ixp2400_name + + .type cpu_ixp2800_name, #object +cpu_ixp2800_name: + .asciz "XScale-IXP2800" + .size cpu_ixp2800_name, . - cpu_ixp2800_name + + .type cpu_pxa255_name, #object +cpu_pxa255_name: + .asciz "XScale-PXA255" + .size cpu_pxa255_name, . - cpu_pxa255_name + + .type cpu_pxa270_name, #object +cpu_pxa270_name: + .asciz "XScale-PXA270" + .size cpu_pxa270_name, . - cpu_pxa270_name + + .align + + .section ".proc.info", #alloc, #execinstr + + .type __80200_proc_info,#object +__80200_proc_info: + .long 0x69052000 + .long 0xfffffff0 + .long PMD_TYPE_SECT | \ + PMD_SECT_BUFFERABLE | \ + PMD_SECT_CACHEABLE | \ + PMD_SECT_AP_WRITE | \ + PMD_SECT_AP_READ + b __xscale_setup + .long cpu_arch_name + .long cpu_elf_name + .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP + .long cpu_80200_name + .long xscale_processor_functions + .long v4wbi_tlb_fns + .long xscale_mc_user_fns + .long xscale_cache_fns + .size __80200_proc_info, . - __80200_proc_info + + .type __8032x_proc_info,#object +__8032x_proc_info: + .long 0x69052420 + .long 0xfffff5e0 @ mask should accomodate IOP80219 also + .long PMD_TYPE_SECT | \ + PMD_SECT_BUFFERABLE | \ + PMD_SECT_CACHEABLE | \ + PMD_SECT_AP_WRITE | \ + PMD_SECT_AP_READ + b __xscale_setup + .long cpu_arch_name + .long cpu_elf_name + .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP + .long cpu_8032x_name + .long xscale_processor_functions + .long v4wbi_tlb_fns + .long xscale_mc_user_fns + .long xscale_cache_fns + .size __8032x_proc_info, . - __8032x_proc_info + + .type __8033x_proc_info,#object +__8033x_proc_info: + .long 0x69054010 + .long 0xffffff30 + .long PMD_TYPE_SECT | \ + PMD_SECT_BUFFERABLE | \ + PMD_SECT_CACHEABLE | \ + PMD_SECT_AP_WRITE | \ + PMD_SECT_AP_READ + b __xscale_setup + .long cpu_arch_name + .long cpu_elf_name + .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP + .long cpu_8033x_name + .long xscale_processor_functions + .long v4wbi_tlb_fns + .long xscale_mc_user_fns + .long xscale_cache_fns + .size __8033x_proc_info, . - __8033x_proc_info + + .type __pxa250_proc_info,#object +__pxa250_proc_info: + .long 0x69052100 + .long 0xfffff7f0 + .long PMD_TYPE_SECT | \ + PMD_SECT_BUFFERABLE | \ + PMD_SECT_CACHEABLE | \ + PMD_SECT_AP_WRITE | \ + PMD_SECT_AP_READ + b __xscale_setup + .long cpu_arch_name + .long cpu_elf_name + .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP + .long cpu_pxa250_name + .long xscale_processor_functions + .long v4wbi_tlb_fns + .long xscale_mc_user_fns + .long xscale_cache_fns + .size __pxa250_proc_info, . - __pxa250_proc_info + + .type __pxa210_proc_info,#object +__pxa210_proc_info: + .long 0x69052120 + .long 0xfffff3f0 + .long PMD_TYPE_SECT | \ + PMD_SECT_BUFFERABLE | \ + PMD_SECT_CACHEABLE | \ + PMD_SECT_AP_WRITE | \ + PMD_SECT_AP_READ + b __xscale_setup + .long cpu_arch_name + .long cpu_elf_name + .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP + .long cpu_pxa210_name + .long xscale_processor_functions + .long v4wbi_tlb_fns + .long xscale_mc_user_fns + .long xscale_cache_fns + .size __pxa210_proc_info, . - __pxa210_proc_info + + .type __ixp2400_proc_info, #object +__ixp2400_proc_info: + .long 0x69054190 + .long 0xfffffff0 + .long PMD_TYPE_SECT | \ + PMD_SECT_BUFFERABLE | \ + PMD_SECT_CACHEABLE | \ + PMD_SECT_AP_WRITE | \ + PMD_SECT_AP_READ + b __xscale_setup + .long cpu_arch_name + .long cpu_elf_name + .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP + .long cpu_ixp2400_name + .long xscale_processor_functions + .long v4wbi_tlb_fns + .long xscale_mc_user_fns + .long xscale_cache_fns + .size __ixp2400_proc_info, . - __ixp2400_proc_info + + .type __ixp2800_proc_info, #object +__ixp2800_proc_info: + .long 0x690541a0 + .long 0xfffffff0 + .long PMD_TYPE_SECT | \ + PMD_SECT_BUFFERABLE | \ + PMD_SECT_CACHEABLE | \ + PMD_SECT_AP_WRITE | \ + PMD_SECT_AP_READ + b __xscale_setup + .long cpu_arch_name + .long cpu_elf_name + .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP + .long cpu_ixp2800_name + .long xscale_processor_functions + .long v4wbi_tlb_fns + .long xscale_mc_user_fns + .long xscale_cache_fns + .size __ixp2800_proc_info, . - __ixp2800_proc_info + + .type __ixp42x_proc_info, #object +__ixp42x_proc_info: + .long 0x690541c0 + .long 0xffffffc0 + .long PMD_TYPE_SECT | \ + PMD_SECT_BUFFERABLE | \ + PMD_SECT_CACHEABLE | \ + PMD_SECT_AP_WRITE | \ + PMD_SECT_AP_READ + b __xscale_setup + .long cpu_arch_name + .long cpu_elf_name + .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP + .long cpu_ixp42x_name + .long xscale_processor_functions + .long v4wbi_tlb_fns + .long xscale_mc_user_fns + .long xscale_cache_fns + .size __ixp42x_proc_info, . - __ixp42x_proc_info + + .type __ixp46x_proc_info, #object +__ixp46x_proc_info: + .long 0x69054200 + .long 0xffffff00 + .long 0x00000c0e + b __xscale_setup + .long cpu_arch_name + .long cpu_elf_name + .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP + .long cpu_ixp46x_name + .long xscale_processor_functions + .long v4wbi_tlb_fns + .long xscale_mc_user_fns + .long xscale_cache_fns + .size __ixp46x_proc_info, . - __ixp46x_proc_info + + .type __pxa255_proc_info,#object +__pxa255_proc_info: + .long 0x69052d00 + .long 0xfffffff0 + .long PMD_TYPE_SECT | \ + PMD_SECT_BUFFERABLE | \ + PMD_SECT_CACHEABLE | \ + PMD_SECT_AP_WRITE | \ + PMD_SECT_AP_READ + b __xscale_setup + .long cpu_arch_name + .long cpu_elf_name + .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP + .long cpu_pxa255_name + .long xscale_processor_functions + .long v4wbi_tlb_fns + .long xscale_mc_user_fns + .long xscale_cache_fns + .size __pxa255_proc_info, . - __pxa255_proc_info + + .type __pxa270_proc_info,#object +__pxa270_proc_info: + .long 0x69054110 + .long 0xfffffff0 + .long PMD_TYPE_SECT | \ + PMD_SECT_BUFFERABLE | \ + PMD_SECT_CACHEABLE | \ + PMD_SECT_AP_WRITE | \ + PMD_SECT_AP_READ + b __xscale_setup + .long cpu_arch_name + .long cpu_elf_name + .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP + .long cpu_pxa270_name + .long xscale_processor_functions + .long v4wbi_tlb_fns + .long xscale_mc_user_fns + .long xscale_cache_fns + .size __pxa270_proc_info, . - __pxa270_proc_info + -- cgit v1.2.3