From d82ad6d6833ee8248e6c34e1b9fc3c4e61e3f035 Mon Sep 17 00:00:00 2001 From: Andrei Birjukov Date: Sun, 22 Feb 2009 22:37:21 +0000 Subject: [ARM] at91: fix for Atmel AT91 powersaving We've discovered that our AT91SAM9260 board consumed too much power when returning from a slowclock low-power mode. RAM self-refresh is enabled in a bootloader in our case, this is how we saw a difference. Estimated ca. 30mA more on 4V battery than the same state before powersaving. After a small research we found that there seems to be a bogus sdram_selfrefresh_disable() call at the end of at91_pm_enter() call, which overwrites the LPR register with uninitialized value. Please find the suggested patch attached. This patch fixes correct restoring of LPR register of the Atmel AT91 SDRAM controller when returning from a power saving mode. Signed-off-by: Andrei Birjukov Acked-by: Andrew Victor Signed-off-by: Andrew Morton Signed-off-by: Russell King --- arch/arm/mach-at91/pm.c | 1 - 1 file changed, 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 9bb4f043aa2..7ac812dc055 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -332,7 +332,6 @@ static int at91_pm_enter(suspend_state_t state) at91_sys_read(AT91_AIC_IPR) & at91_sys_read(AT91_AIC_IMR)); error: - sdram_selfrefresh_disable(); target_state = PM_SUSPEND_ON; at91_irq_resume(); at91_gpio_resume(); -- cgit v1.2.3 From c8532db7f2661b63f658b9a08cf4053a3e6abb78 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 24 Feb 2009 15:55:48 +0100 Subject: [ARM] 5411/1: S3C64XX: Fix EINT unmask Currently the unmask function for EINT interrupts was setting the mask bit rather than clearing it. This was also previously reported and fixed by Kyungmin Park and others. Acked-By: Ben Dooks Signed-off-by: Mark Brown Signed-off-by: Russell King --- arch/arm/plat-s3c64xx/irq-eint.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/plat-s3c64xx/irq-eint.c b/arch/arm/plat-s3c64xx/irq-eint.c index 1f7cc0067f5..ebb305ce768 100644 --- a/arch/arm/plat-s3c64xx/irq-eint.c +++ b/arch/arm/plat-s3c64xx/irq-eint.c @@ -55,7 +55,7 @@ static void s3c_irq_eint_unmask(unsigned int irq) u32 mask; mask = __raw_readl(S3C64XX_EINT0MASK); - mask |= eint_irq_to_bit(irq); + mask &= ~eint_irq_to_bit(irq); __raw_writel(mask, S3C64XX_EINT0MASK); } -- cgit v1.2.3 From 07555c9880da3e2e96e5eae00a03b44cc076deaf Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 2 Mar 2009 22:29:37 -0800 Subject: OMAP: enable smc911x support for LDP platform The following patch enables SMC911x support to work on the OMAP LDP board. Although the SMC911x driver will eventually be obsoleted, the smsc911x patches are rather invasive for the -rc kernels. Rather than risk destablising smsc911x, this simpler patch is preferred to allow the network interface to work. Signed-off-by: Russell King Acked-by: Tony Lindgren Signed-off-by: David S. Miller --- arch/arm/mach-omap2/board-ldp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index f6a13451d1f..6031e179926 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -81,7 +81,7 @@ static inline void __init ldp_init_smc911x(void) } ldp_smc911x_resources[0].start = cs_mem_base + 0x0; - ldp_smc911x_resources[0].end = cs_mem_base + 0xf; + ldp_smc911x_resources[0].end = cs_mem_base + 0xff; udelay(100); eth_gpio = LDP_SMC911X_GPIO; -- cgit v1.2.3 From 25ef4a67e78e1322d55f0a38783537ed89addc02 Mon Sep 17 00:00:00 2001 From: Seth Forshee Date: Mon, 2 Mar 2009 22:39:36 +0100 Subject: [ARM] 5416/1: Use unused address in v6_early_abort The target of the strex instruction to clear the exlusive monitor is currently the top of the stack. If the store succeeeds this corrupts r0 in pt_regs. Use the next stack location instead of the current one to prevent any chance of corrupting an in-use address. Signed-off-by: Seth Forshee Signed-off-by: Russell King --- arch/arm/mm/abort-ev6.S | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mm/abort-ev6.S b/arch/arm/mm/abort-ev6.S index 8a7f65ba14b..94077fbd96b 100644 --- a/arch/arm/mm/abort-ev6.S +++ b/arch/arm/mm/abort-ev6.S @@ -23,7 +23,8 @@ ENTRY(v6_early_abort) #ifdef CONFIG_CPU_32v6K clrex #else - strex r0, r1, [sp] @ Clear the exclusive monitor + sub r1, sp, #4 @ Get unused stack location + strex r0, r1, [r1] @ Clear the exclusive monitor #endif mrc p15, 0, r1, c5, c0, 0 @ get FSR mrc p15, 0, r0, c6, c0, 0 @ get FAR -- cgit v1.2.3 From b57ee99fab25dbc12150fe66fe54dc52bc6de784 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Tue, 3 Mar 2009 11:44:12 +0100 Subject: [ARM] 5417/1: Set the correct cacheid for ARMv6 CPUs with ARMv7 style MMU The cacheid_init() function assumes that if cpu_architecture() returns 7, the caches are VIPT_NONALIASING. The cpu_architecture() function returns the version of the supported MMU features (e.g. TEX remapping) but it doesn't make any assumptions about the cache type. The patch adds the checking of the Cache Type Register for the ARMv7 format. Signed-off-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/kernel/setup.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 7049815d66d..68d6494c038 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -233,12 +233,13 @@ static void __init cacheid_init(void) unsigned int cachetype = read_cpuid_cachetype(); unsigned int arch = cpu_architecture(); - if (arch >= CPU_ARCH_ARMv7) { - cacheid = CACHEID_VIPT_NONALIASING; - if ((cachetype & (3 << 14)) == 1 << 14) - cacheid |= CACHEID_ASID_TAGGED; - } else if (arch >= CPU_ARCH_ARMv6) { - if (cachetype & (1 << 23)) + if (arch >= CPU_ARCH_ARMv6) { + if ((cachetype & (7 << 29)) == 4 << 29) { + /* ARMv7 register format */ + cacheid = CACHEID_VIPT_NONALIASING; + if ((cachetype & (3 << 14)) == 1 << 14) + cacheid |= CACHEID_ASID_TAGGED; + } else if (cachetype & (1 << 23)) cacheid = CACHEID_VIPT_ALIASING; else cacheid = CACHEID_VIPT_NONALIASING; -- cgit v1.2.3