From cfb0810eab39d1162f45b73fc96f45ab1cbcbe8b Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 30 Jun 2005 11:06:49 +0100 Subject: [PATCH] ARM: Don't try to send a signal to pid0 If we receive an unrecognised abort during boot, don't try to send a signal to pid0, but instead report the current state. This leads to less confusing debug reports. Signed-off-by: Russell King --- arch/arm/kernel/traps.c | 12 ++------ arch/arm/mm/fault.c | 75 ++++++++++++++++++++++++++----------------------- 2 files changed, 42 insertions(+), 45 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 2fb0a4cfb37..df2cb06ce42 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -230,16 +230,8 @@ NORET_TYPE void die(const char *str, struct pt_regs *regs, int err) do_exit(SIGSEGV); } -void die_if_kernel(const char *str, struct pt_regs *regs, int err) -{ - if (user_mode(regs)) - return; - - die(str, regs, err); -} - -static void notify_die(const char *str, struct pt_regs *regs, siginfo_t *info, - unsigned long err, unsigned long trap) +void notify_die(const char *str, struct pt_regs *regs, struct siginfo *info, + unsigned long err, unsigned long trap) { if (user_mode(regs)) { current->thread.error_code = err; diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c index e25b4fd8412..65bfe84b6d6 100644 --- a/arch/arm/mm/fault.c +++ b/arch/arm/mm/fault.c @@ -372,49 +372,50 @@ do_bad(unsigned long addr, unsigned int fsr, struct pt_regs *regs) static struct fsr_info { int (*fn)(unsigned long addr, unsigned int fsr, struct pt_regs *regs); int sig; + int code; const char *name; } fsr_info[] = { /* * The following are the standard ARMv3 and ARMv4 aborts. ARMv5 * defines these to be "precise" aborts. */ - { do_bad, SIGSEGV, "vector exception" }, - { do_bad, SIGILL, "alignment exception" }, - { do_bad, SIGKILL, "terminal exception" }, - { do_bad, SIGILL, "alignment exception" }, - { do_bad, SIGBUS, "external abort on linefetch" }, - { do_translation_fault, SIGSEGV, "section translation fault" }, - { do_bad, SIGBUS, "external abort on linefetch" }, - { do_page_fault, SIGSEGV, "page translation fault" }, - { do_bad, SIGBUS, "external abort on non-linefetch" }, - { do_bad, SIGSEGV, "section domain fault" }, - { do_bad, SIGBUS, "external abort on non-linefetch" }, - { do_bad, SIGSEGV, "page domain fault" }, - { do_bad, SIGBUS, "external abort on translation" }, - { do_sect_fault, SIGSEGV, "section permission fault" }, - { do_bad, SIGBUS, "external abort on translation" }, - { do_page_fault, SIGSEGV, "page permission fault" }, + { do_bad, SIGSEGV, 0, "vector exception" }, + { do_bad, SIGILL, BUS_ADRALN, "alignment exception" }, + { do_bad, SIGKILL, 0, "terminal exception" }, + { do_bad, SIGILL, BUS_ADRALN, "alignment exception" }, + { do_bad, SIGBUS, 0, "external abort on linefetch" }, + { do_translation_fault, SIGSEGV, SEGV_MAPERR, "section translation fault" }, + { do_bad, SIGBUS, 0, "external abort on linefetch" }, + { do_page_fault, SIGSEGV, SEGV_MAPERR, "page translation fault" }, + { do_bad, SIGBUS, 0, "external abort on non-linefetch" }, + { do_bad, SIGSEGV, SEGV_ACCERR, "section domain fault" }, + { do_bad, SIGBUS, 0, "external abort on non-linefetch" }, + { do_bad, SIGSEGV, SEGV_ACCERR, "page domain fault" }, + { do_bad, SIGBUS, 0, "external abort on translation" }, + { do_sect_fault, SIGSEGV, SEGV_ACCERR, "section permission fault" }, + { do_bad, SIGBUS, 0, "external abort on translation" }, + { do_page_fault, SIGSEGV, SEGV_ACCERR, "page permission fault" }, /* * The following are "imprecise" aborts, which are signalled by bit * 10 of the FSR, and may not be recoverable. These are only * supported if the CPU abort handler supports bit 10. */ - { do_bad, SIGBUS, "unknown 16" }, - { do_bad, SIGBUS, "unknown 17" }, - { do_bad, SIGBUS, "unknown 18" }, - { do_bad, SIGBUS, "unknown 19" }, - { do_bad, SIGBUS, "lock abort" }, /* xscale */ - { do_bad, SIGBUS, "unknown 21" }, - { do_bad, SIGBUS, "imprecise external abort" }, /* xscale */ - { do_bad, SIGBUS, "unknown 23" }, - { do_bad, SIGBUS, "dcache parity error" }, /* xscale */ - { do_bad, SIGBUS, "unknown 25" }, - { do_bad, SIGBUS, "unknown 26" }, - { do_bad, SIGBUS, "unknown 27" }, - { do_bad, SIGBUS, "unknown 28" }, - { do_bad, SIGBUS, "unknown 29" }, - { do_bad, SIGBUS, "unknown 30" }, - { do_bad, SIGBUS, "unknown 31" } + { do_bad, SIGBUS, 0, "unknown 16" }, + { do_bad, SIGBUS, 0, "unknown 17" }, + { do_bad, SIGBUS, 0, "unknown 18" }, + { do_bad, SIGBUS, 0, "unknown 19" }, + { do_bad, SIGBUS, 0, "lock abort" }, /* xscale */ + { do_bad, SIGBUS, 0, "unknown 21" }, + { do_bad, SIGBUS, BUS_OBJERR, "imprecise external abort" }, /* xscale */ + { do_bad, SIGBUS, 0, "unknown 23" }, + { do_bad, SIGBUS, 0, "dcache parity error" }, /* xscale */ + { do_bad, SIGBUS, 0, "unknown 25" }, + { do_bad, SIGBUS, 0, "unknown 26" }, + { do_bad, SIGBUS, 0, "unknown 27" }, + { do_bad, SIGBUS, 0, "unknown 28" }, + { do_bad, SIGBUS, 0, "unknown 29" }, + { do_bad, SIGBUS, 0, "unknown 30" }, + { do_bad, SIGBUS, 0, "unknown 31" } }; void __init @@ -435,15 +436,19 @@ asmlinkage void do_DataAbort(unsigned long addr, unsigned int fsr, struct pt_regs *regs) { const struct fsr_info *inf = fsr_info + (fsr & 15) + ((fsr & (1 << 10)) >> 6); + struct siginfo info; if (!inf->fn(addr, fsr, regs)) return; printk(KERN_ALERT "Unhandled fault: %s (0x%03x) at 0x%08lx\n", inf->name, fsr, addr); - force_sig(inf->sig, current); - show_pte(current->mm, addr); - die_if_kernel("Oops", regs, 0); + + info.si_signo = inf->sig; + info.si_errno = 0; + info.si_code = inf->code; + info.si_addr = (void __user *)addr; + notify_die("", regs, &info, fsr, 0); } asmlinkage void -- cgit v1.2.3 From c19cb1df809dcf343dd1eb6fe60d53639dafcb8c Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Thu, 30 Jun 2005 17:04:13 +0100 Subject: [PATCH] ARM: 2777/1: Fix broken comment arch/arm/mm/proc-arm1020.S Patch from Catalin Marinas This patch fixes a broken comment in the proc-arm1020.S file which prevents the file compilation Signed-off-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/mm/proc-arm1020.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S index 1f325231b9e..e69f1940ab3 100644 --- a/arch/arm/mm/proc-arm1020.S +++ b/arch/arm/mm/proc-arm1020.S @@ -445,7 +445,7 @@ __arm1020_setup: /* * R * .RVI ZFRS BLDP WCAM - * .0.1 1001 ..11 0101 /* FIXME: why no V bit? */ + * .0.1 1001 ..11 0101 FIXME: why no V bit? */ .type arm1020_cr1_clear, #object .type arm1020_cr1_set, #object -- cgit v1.2.3 From c28a814f25d48f193565003223df0ae617796892 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Thu, 30 Jun 2005 17:04:14 +0100 Subject: [PATCH] ARM: 2778/1: Add -mno-thumb-interwork to CFLAGS_ABI Patch from Catalin Marinas The new EABI gcc adds -mthumb-interwork by default, even if -mabi=apcs-gnu is passed. This causes a warning for every compiled C file when -march=armv4 is used. The patch adds -mno-thumb-interwork if the option is supported. This is also useful since we don't need any ARM/Thumb interworking in the kernel Signed-off-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 8330495e244..eb933dcafba 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -56,7 +56,7 @@ tune-$(CONFIG_CPU_XSCALE) :=$(call cc-option,-mtune=xscale,-mtune=strongarm110) tune-$(CONFIG_CPU_V6) :=-mtune=strongarm # Need -Uarm for gcc < 3.x -CFLAGS_ABI :=$(call cc-option,-mapcs-32,-mabi=apcs-gnu) +CFLAGS_ABI :=$(call cc-option,-mapcs-32,-mabi=apcs-gnu) $(call cc-option,-mno-thumb-interwork,) CFLAGS +=$(CFLAGS_ABI) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm AFLAGS +=$(CFLAGS_ABI) $(arch-y) $(tune-y) -msoft-float -- cgit v1.2.3 From abaf48a05a8f097654e746af2a5afb2ab95861a1 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Thu, 30 Jun 2005 17:04:14 +0100 Subject: [PATCH] ARM: 2779/1: Fix the V bit setting for the ARM1020x CPUs Patch from Catalin Marinas This patch fixes the V bit setting for the ARM1020x processors. At reset, this bit is automatically set to the value of the HIVECSINIT input signal which just happened to be 1 but it is not mandatory. Signed-off-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/mm/proc-arm1020.S | 4 ++-- arch/arm/mm/proc-arm1020e.S | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S index e69f1940ab3..5c0ae5260d1 100644 --- a/arch/arm/mm/proc-arm1020.S +++ b/arch/arm/mm/proc-arm1020.S @@ -445,14 +445,14 @@ __arm1020_setup: /* * R * .RVI ZFRS BLDP WCAM - * .0.1 1001 ..11 0101 FIXME: why no V bit? + * .011 1001 ..11 0101 */ .type arm1020_cr1_clear, #object .type arm1020_cr1_set, #object arm1020_cr1_clear: .word 0x593f arm1020_cr1_set: - .word 0x1935 + .word 0x3935 __INITDATA diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S index 142a2c2d6f0..d69389c4d4b 100644 --- a/arch/arm/mm/proc-arm1020e.S +++ b/arch/arm/mm/proc-arm1020e.S @@ -427,14 +427,14 @@ __arm1020e_setup: /* * R * .RVI ZFRS BLDP WCAM - * .0.1 1001 ..11 0101 /* FIXME: why no V bit? */ + * .011 1001 ..11 0101 */ .type arm1020e_cr1_clear, #object .type arm1020e_cr1_set, #object arm1020e_cr1_clear: .word 0x5f3f arm1020e_cr1_set: - .word 0x1935 + .word 0x3935 __INITDATA -- cgit v1.2.3 From 26705ca46bdf81113cc6729eb12b9eee2263bbfc Mon Sep 17 00:00:00 2001 From: Todd Poynor Date: Fri, 1 Jul 2005 11:27:05 +0100 Subject: [PATCH] ARM: 2781/2: PXA27x Standby mode take 2 Patch from Todd Poynor Add support for PXA27x Standby mode, a low-power mode that retains CPU and some peripheral state (the existing "sleep" mode is a power-power mode that retains less state). Activated via: echo -n standby > /sys/power/state From: David Burrage and Todd Poynor Signed-off-by: Todd Poynor Signed-off-by: Russell King --- arch/arm/mach-pxa/Makefile | 4 ++++ arch/arm/mach-pxa/pxa27x.c | 9 ++++++++- arch/arm/mach-pxa/standby.S | 32 ++++++++++++++++++++++++++++++++ 3 files changed, 44 insertions(+), 1 deletion(-) create mode 100644 arch/arm/mach-pxa/standby.S (limited to 'arch/arm') diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index c4e6d252358..efc2f657184 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -24,3 +24,7 @@ obj-$(CONFIG_LEDS) += $(led-y) # Misc features obj-$(CONFIG_PM) += pm.o sleep.o + +ifeq ($(CONFIG_PXA27x),y) +obj-$(CONFIG_PM) += standby.o +endif diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index 893964fb965..9a791b07118 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -126,6 +126,7 @@ int pxa_cpu_pm_prepare(suspend_state_t state) { switch (state) { case PM_SUSPEND_MEM: + case PM_SUSPEND_STANDBY: return 0; default: return -EINVAL; @@ -138,7 +139,10 @@ void pxa_cpu_pm_enter(suspend_state_t state) extern void pxa_cpu_suspend(unsigned int); extern void pxa_cpu_resume(void); - CKEN = CKEN22_MEMC | CKEN9_OSTIMER; + if (state == PM_SUSPEND_STANDBY) + CKEN = CKEN22_MEMC | CKEN9_OSTIMER | CKEN16_LCD |CKEN0_PWM0; + else + CKEN = CKEN22_MEMC | CKEN9_OSTIMER; /* ensure voltage-change sequencer not initiated, which hangs */ PCFR &= ~PCFR_FVC; @@ -147,6 +151,9 @@ void pxa_cpu_pm_enter(suspend_state_t state) PEDR = 0xDF12FE1B; switch (state) { + case PM_SUSPEND_STANDBY: + pxa_cpu_standby(); + break; case PM_SUSPEND_MEM: /* set resume return address */ PSPR = virt_to_phys(pxa_cpu_resume); diff --git a/arch/arm/mach-pxa/standby.S b/arch/arm/mach-pxa/standby.S new file mode 100644 index 00000000000..8a3f27b7678 --- /dev/null +++ b/arch/arm/mach-pxa/standby.S @@ -0,0 +1,32 @@ +/* + * PXA27x standby mode + * + * Author: David Burrage + * + * 2005 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ + +#include +#include +#include +#include + +#include + + .text + +ENTRY(pxa_cpu_standby) + ldr r0, =PSSR + mov r1, #(PSSR_PH | PSSR_STS) + mov r2, #2 + mov r3, #UNCACHED_PHYS_0 @ Read mem context in. + ldr ip, [r3] + b 1f + + .align 5 +1: mcr p14, 0, r2, c7, c0, 0 @ put the system into Standby + str r1, [r0] @ make sure PSSR_PH/STS are clear + mov pc, lr -- cgit v1.2.3 From e695f60454f665604fe1b6e473f25b098203965a Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 1 Jul 2005 11:27:06 +0100 Subject: [PATCH] ARM: 2783/1: Remove omnimeter_defconfig as there is no kernel support Patch from Ben Dooks The omnimeter_defconfig does not define any machines and seems to have no other support in the current kernel. This patch removes the config file, as this is the only thing currently mentioning the ominmeter. Signed-off-by: Ben Dooks Signed-off-by: Russell King --- arch/arm/configs/omnimeter_defconfig | 803 ----------------------------------- 1 file changed, 803 deletions(-) delete mode 100644 arch/arm/configs/omnimeter_defconfig (limited to 'arch/arm') diff --git a/arch/arm/configs/omnimeter_defconfig b/arch/arm/configs/omnimeter_defconfig deleted file mode 100644 index 78fdb4a428b..00000000000 --- a/arch/arm/configs/omnimeter_defconfig +++ /dev/null @@ -1,803 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc1-bk2 -# Sun Mar 27 21:31:45 2005 -# -CONFIG_ARM=y -CONFIG_MMU=y -CONFIG_UID16=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_IOMAP=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_BROKEN_ON_SMP=y - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y -# CONFIG_IKCONFIG is not set -# CONFIG_EMBEDDED is not set -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# -CONFIG_MODULES=y -# CONFIG_MODULE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y - -# -# System Type -# -# CONFIG_ARCH_CLPS7500 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_IOP3XX is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_IXP2000 is not set -# CONFIG_ARCH_L7200 is not set -# CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_RPC is not set -CONFIG_ARCH_SA1100=y -# CONFIG_ARCH_S3C2410 is not set -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_LH7A40X is not set -# CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_H720X is not set - -# -# SA11x0 Implementations -# -# CONFIG_SA1100_ASSABET is not set -# CONFIG_SA1100_CERF is not set -# CONFIG_SA1100_COLLIE is not set -# CONFIG_SA1100_H3100 is not set -# CONFIG_SA1100_H3600 is not set -# CONFIG_SA1100_H3800 is not set -# CONFIG_SA1100_BADGE4 is not set -# CONFIG_SA1100_JORNADA720 is not set -# CONFIG_SA1100_HACKKIT is not set -# CONFIG_SA1100_LART is not set -# CONFIG_SA1100_PLEB is not set -# CONFIG_SA1100_SHANNON is not set -# CONFIG_SA1100_SIMPAD is not set -# CONFIG_SA1100_SSP is not set - -# -# Processor Type -# -CONFIG_CPU_32=y -CONFIG_CPU_SA1100=y -CONFIG_CPU_32v4=y -CONFIG_CPU_ABRT_EV4=y -CONFIG_CPU_CACHE_V4WB=y -CONFIG_CPU_CACHE_VIVT=y -CONFIG_CPU_TLB_V4WB=y -CONFIG_CPU_MINICACHE=y - -# -# Processor Features -# - -# -# Bus support -# -CONFIG_ISA=y - -# -# PCCARD (PCMCIA/CardBus) support -# -CONFIG_PCCARD=y -# CONFIG_PCMCIA_DEBUG is not set -CONFIG_PCMCIA=y - -# -# PC-card bridges -# -CONFIG_I82365=y -# CONFIG_TCIC is not set -CONFIG_PCMCIA_SA1100=y -CONFIG_PCCARD_NONSTATIC=y - -# -# Kernel Features -# -# CONFIG_PREEMPT is not set -CONFIG_DISCONTIGMEM=y -# CONFIG_LEDS is not set -CONFIG_ALIGNMENT_TRAP=y - -# -# Boot options -# -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="keepinitrd mem=16M root=/dev/ram ramdisk=8192 initrd=0xd0000000,4M" -# CONFIG_XIP_KERNEL is not set - -# -# CPU Frequency scaling -# -# CONFIG_CPU_FREQ is not set - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# -# CONFIG_FPE_NWFPE is not set -# CONFIG_FPE_FASTFPE is not set - -# -# Userspace binary formats -# -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_AOUT=y -# CONFIG_BINFMT_MISC is not set -# CONFIG_ARTHUR is not set - -# -# Power management options -# -# CONFIG_PM is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNP is not set - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_DEV_XD is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=m -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -CONFIG_BLK_DEV_NBD=m -# CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -# CONFIG_BLK_DEV_IDECS is not set -# CONFIG_BLK_DEV_IDECD is not set -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_IDE_TASK_IOCTL is not set - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -# CONFIG_IDE_ARM is not set -# CONFIG_IDE_CHIPSETS is not set -# CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_IDEDMA_AUTO is not set -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI device support -# -# CONFIG_SCSI is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -# CONFIG_NETLINK_DEV is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set - -# -# IP: Virtual Server Configuration -# -# CONFIG_IP_VS is not set -# CONFIG_IPV6 is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set - -# -# IP: Netfilter Configuration -# -# CONFIG_IP_NF_CONNTRACK is not set -# CONFIG_IP_NF_CONNTRACK_MARK is not set -# CONFIG_IP_NF_QUEUE is not set -# CONFIG_IP_NF_IPTABLES is not set -# CONFIG_IP_NF_ARPTABLES is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -# CONFIG_MII is not set -# CONFIG_NET_VENDOR_3COM is not set -# CONFIG_LANCE is not set -# CONFIG_NET_VENDOR_SMC is not set -# CONFIG_SMC91X is not set -# CONFIG_NET_VENDOR_RACAL is not set -# CONFIG_AT1700 is not set -# CONFIG_DEPCA is not set -# CONFIG_HP100 is not set -# CONFIG_NET_ISA is not set -# CONFIG_NET_PCI is not set -# CONFIG_NET_POCKET is not set - -# -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -CONFIG_NET_RADIO=y - -# -# Obsolete Wireless cards support (pre-802.11) -# -# CONFIG_STRIP is not set -# CONFIG_ARLAN is not set -# CONFIG_WAVELAN is not set -CONFIG_PCMCIA_WAVELAN=y -# CONFIG_PCMCIA_NETWAVE is not set - -# -# Wireless 802.11 Frequency Hopping cards support -# -# CONFIG_PCMCIA_RAYCS is not set - -# -# Wireless 802.11b ISA/PCI cards support -# -# CONFIG_HERMES is not set -# CONFIG_ATMEL is not set - -# -# Wireless 802.11b Pcmcia/Cardbus cards support -# -CONFIG_AIRO_CS=y -CONFIG_PCMCIA_WL3501=y -CONFIG_NET_WIRELESS=y - -# -# PCMCIA network device support -# -CONFIG_NET_PCMCIA=y -CONFIG_PCMCIA_3C589=y -# CONFIG_PCMCIA_3C574 is not set -# CONFIG_PCMCIA_FMVJ18X is not set -CONFIG_PCMCIA_PCNET=y -# CONFIG_PCMCIA_NMCLAN is not set -# CONFIG_PCMCIA_SMC91C92 is not set -# CONFIG_PCMCIA_XIRC2PS is not set -# CONFIG_PCMCIA_AXNET is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -CONFIG_KEYBOARD_ATKBD=y -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -CONFIG_INPUT_MOUSE=y -CONFIG_MOUSE_PS2=y -# CONFIG_MOUSE_SERIAL is not set -# CONFIG_MOUSE_INPORT is not set -# CONFIG_MOUSE_LOGIBM is not set -# CONFIG_MOUSE_PC110PAD is not set -# CONFIG_MOUSE_VSXXXAA is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -CONFIG_SERIO_SERPORT=y -CONFIG_SERIO_LIBPS2=y -# CONFIG_SERIO_RAW is not set -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_SA1100=y -CONFIG_SERIAL_SA1100_CONSOLE=y -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_NVRAM is not set -# CONFIG_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_DRM is not set - -# -# PCMCIA character devices -# -# CONFIG_SYNCLINK_CS is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# Misc devices -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -CONFIG_FB=y -CONFIG_FB_CFB_FILLRECT=y -CONFIG_FB_CFB_COPYAREA=y -CONFIG_FB_CFB_IMAGEBLIT=y -CONFIG_FB_SOFT_CURSOR=y -# CONFIG_FB_MODE_HELPERS is not set -# CONFIG_FB_TILEBLITTING is not set -CONFIG_FB_SA1100=y -# CONFIG_FB_VIRTUAL is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -# CONFIG_MDA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_FONTS=y -CONFIG_FONT_8x8=y -# CONFIG_FONT_8x16 is not set -# CONFIG_FONT_6x11 is not set -# CONFIG_FONT_PEARL_8x8 is not set -# CONFIG_FONT_ACORN_8x8 is not set -# CONFIG_FONT_MINI_4x6 is not set -# CONFIG_FONT_SUN8x16 is not set -# CONFIG_FONT_SUN12x22 is not set - -# -# Logo configuration -# -# CONFIG_LOGO is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -# CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USB is not set - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT3_FS is not set -# CONFIG_JBD is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set - -# -# XFS support -# -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=y -CONFIG_MSDOS_FS=y -# CONFIG_VFAT_FS is not set -CONFIG_FAT_DEFAULT_CODEPAGE=437 -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set -# CONFIG_DEVPTS_FS_XATTR is not set -# CONFIG_TMPFS is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_LOCKD=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -# CONFIG_NLS_CODEPAGE_437 is not set -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set -# CONFIG_NLS_ISO8859_1 is not set -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_DEBUG_BUGVERBOSE=y -CONFIG_FRAME_POINTER=y -# CONFIG_DEBUG_USER is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set - -# -# Hardware crypto devices -# - -# -# Library routines -# -# CONFIG_CRC_CCITT is not set -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set -- cgit v1.2.3 From c77b042700ae1fc4d661d7d62787899e755160d5 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 1 Jul 2005 11:56:55 +0100 Subject: [PATCH] ARM: Make the magic values in head.S more obvious Make the magic address values in head.S more obvious as to where they came from. Wrap all debug code in CONFIG_DEBUG_LL. Signed-off-by: Russell King --- arch/arm/kernel/head.S | 20 ++++++++------------ 1 file changed, 8 insertions(+), 12 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index bd4823c7464..1155cf07c87 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -344,9 +344,9 @@ __create_page_tables: str r6, [r0] #endif +#ifdef CONFIG_DEBUG_LL bic r7, r7, #0x0c @ turn off cacheable @ and bufferable bits -#ifdef CONFIG_DEBUG_LL /* * Map in IO space for serial debugging. * This allows debug messages to be output @@ -372,27 +372,23 @@ __create_page_tables: teq r1, #MACH_TYPE_NETWINDER teqne r1, #MACH_TYPE_CATS bne 1f - add r0, r4, #0x3fc0 @ ff000000 - mov r3, #0x7c000000 - orr r3, r3, r7 - str r3, [r0], #4 - add r3, r3, #1 << 20 - str r3, [r0], #4 + add r0, r4, #0xff000000 >> 18 + orr r3, r7, #0x7c000000 + str r3, [r0] 1: #endif -#endif #ifdef CONFIG_ARCH_RPC /* * Map in screen at 0x02000000 & SCREEN2_BASE * Similar reasons here - for debug. This is * only for Acorn RiscPC architectures. */ - add r0, r4, #0x80 @ 02000000 - mov r3, #0x02000000 - orr r3, r3, r7 + add r0, r4, #0x02000000 >> 18 + orr r3, r7, #0x02000000 str r3, [r0] - add r0, r4, #0x3600 @ d8000000 + add r0, r4, #0xd8000000 >> 18 str r3, [r0] +#endif #endif mov pc, lr .ltorg -- cgit v1.2.3 From db5795547694cf68388aaf8f59723e850f7466f6 Mon Sep 17 00:00:00 2001 From: Nishanth Aravamudan Date: Fri, 1 Jul 2005 12:11:51 +0100 Subject: [PATCH] ARM: replace schedule_timeout() with msleep() Use msleep() instead of schedule_timeout() to guarantee the task delays as expected. Neither signals nor wait-queue events are important at this point in the code, I believe. Signed-off-by: Nishanth Aravamudan Signed-off-by: Domen Puncer Signed-off-by: Russell King --- arch/arm/mach-sa1100/cpu-sa1110.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-sa1100/cpu-sa1110.c b/arch/arm/mach-sa1100/cpu-sa1110.c index 8d2a89a2ea0..04c94ab6c18 100644 --- a/arch/arm/mach-sa1100/cpu-sa1110.c +++ b/arch/arm/mach-sa1100/cpu-sa1110.c @@ -271,8 +271,7 @@ static int sa1110_target(struct cpufreq_policy *policy, */ sdram_set_refresh(2); if (!irqs_disabled()) { - set_current_state(TASK_UNINTERRUPTIBLE); - schedule_timeout(20 * HZ / 1000); + msleep(20); } else { mdelay(20); } -- cgit v1.2.3 From e9dea0c65d2de6981356c055781fb99d7191b14e Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 3 Jul 2005 17:38:58 +0100 Subject: [PATCH] ARM: Remove machine description macros Remove the pointless machine description macros, favouring C99 initialisers instead. Signed-off-by: Russell King --- arch/arm/mach-aaec2000/aaed2000.c | 10 +++--- arch/arm/mach-clps711x/autcpu12.c | 12 ++++--- arch/arm/mach-clps711x/cdb89712.c | 12 ++++--- arch/arm/mach-clps711x/ceiva.c | 12 ++++--- arch/arm/mach-clps711x/clep7312.c | 14 ++++---- arch/arm/mach-clps711x/edb7211-arch.c | 14 ++++---- arch/arm/mach-clps711x/fortunet.c | 14 ++++---- arch/arm/mach-clps711x/p720t.c | 14 ++++---- arch/arm/mach-clps7500/core.c | 14 ++++---- arch/arm/mach-ebsa110/core.c | 18 +++++----- arch/arm/mach-epxa10db/arch.c | 10 +++--- arch/arm/mach-footbridge/cats-hw.c | 16 +++++---- arch/arm/mach-footbridge/co285.c | 12 ++++--- arch/arm/mach-footbridge/ebsa285.c | 15 ++++---- arch/arm/mach-footbridge/netwinder-hw.c | 21 ++++++----- arch/arm/mach-footbridge/personal.c | 12 ++++--- arch/arm/mach-h720x/h7201-eval.c | 14 ++++---- arch/arm/mach-h720x/h7202-eval.c | 16 +++++---- arch/arm/mach-imx/mx1ads.c | 14 ++++---- arch/arm/mach-integrator/integrator_ap.c | 14 ++++---- arch/arm/mach-integrator/integrator_cp.c | 14 ++++---- arch/arm/mach-iop3xx/iop321-setup.c | 28 ++++++++------- arch/arm/mach-iop3xx/iop331-setup.c | 30 ++++++++-------- arch/arm/mach-ixp2000/enp2611.c | 14 ++++---- arch/arm/mach-ixp2000/ixdp2400.c | 14 ++++---- arch/arm/mach-ixp2000/ixdp2800.c | 14 ++++---- arch/arm/mach-ixp2000/ixdp2x01.c | 28 ++++++++------- arch/arm/mach-ixp4xx/coyote-setup.c | 30 ++++++++-------- arch/arm/mach-ixp4xx/gtwx5715-setup.c | 17 ++++----- arch/arm/mach-ixp4xx/ixdp425-setup.c | 60 +++++++++++++++++--------------- arch/arm/mach-l7200/core.c | 10 +++--- arch/arm/mach-lh7a40x/arch-kev7a400.c | 12 ++++--- arch/arm/mach-lh7a40x/arch-lpd7a40x.c | 28 ++++++++------- arch/arm/mach-omap/board-generic.c | 14 ++++---- arch/arm/mach-omap/board-h2.c | 14 ++++---- arch/arm/mach-omap/board-h3.c | 14 ++++---- arch/arm/mach-omap/board-innovator.c | 14 ++++---- arch/arm/mach-omap/board-netstar.c | 16 +++++---- arch/arm/mach-omap/board-osk.c | 14 ++++---- arch/arm/mach-omap/board-perseus2.c | 14 ++++---- arch/arm/mach-omap/board-voiceblue.c | 16 +++++---- arch/arm/mach-omap/usb.c | 1 - arch/arm/mach-pxa/corgi.c | 42 ++++++++++++---------- arch/arm/mach-pxa/idp.c | 12 ++++--- arch/arm/mach-pxa/lubbock.c | 12 ++++--- arch/arm/mach-pxa/mainstone.c | 12 ++++--- arch/arm/mach-pxa/poodle.c | 14 ++++---- arch/arm/mach-rpc/riscpc.c | 16 +++++---- arch/arm/mach-s3c2410/mach-bast.c | 9 ++--- arch/arm/mach-s3c2410/mach-h1940.c | 12 ++++--- arch/arm/mach-s3c2410/mach-n30.c | 9 ++--- arch/arm/mach-s3c2410/mach-nexcoder.c | 8 +++-- arch/arm/mach-s3c2410/mach-otom.c | 8 +++-- arch/arm/mach-s3c2410/mach-rx3715.c | 14 ++++---- arch/arm/mach-s3c2410/mach-smdk2410.c | 12 ++++--- arch/arm/mach-s3c2410/mach-smdk2440.c | 8 +++-- arch/arm/mach-s3c2410/mach-vr1000.c | 8 +++-- arch/arm/mach-sa1100/assabet.c | 12 ++++--- arch/arm/mach-sa1100/badge4.c | 10 +++--- arch/arm/mach-sa1100/cerf.c | 10 +++--- arch/arm/mach-sa1100/collie.c | 8 +++-- arch/arm/mach-sa1100/h3600.c | 30 +++++++++------- arch/arm/mach-sa1100/hackkit.c | 10 +++--- arch/arm/mach-sa1100/jornada720.c | 10 +++--- arch/arm/mach-sa1100/lart.c | 10 +++--- arch/arm/mach-sa1100/pleb.c | 8 +++-- arch/arm/mach-sa1100/shannon.c | 10 +++--- arch/arm/mach-sa1100/simpad.c | 12 ++++--- arch/arm/mach-shark/core.c | 12 ++++--- arch/arm/mach-versatile/versatile_ab.c | 14 ++++---- arch/arm/mach-versatile/versatile_pb.c | 14 ++++---- 71 files changed, 607 insertions(+), 453 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-aaec2000/aaed2000.c b/arch/arm/mach-aaec2000/aaed2000.c index 5417ca3f462..c9d89988664 100644 --- a/arch/arm/mach-aaec2000/aaed2000.c +++ b/arch/arm/mach-aaec2000/aaed2000.c @@ -40,9 +40,11 @@ static void __init aaed2000_map_io(void) } MACHINE_START(AAED2000, "Agilent AAED-2000 Development Platform") - MAINTAINER("Nicolas Bellido Y Ortega") - BOOT_MEM(0xf0000000, PIO_BASE, VIO_BASE) - MAPIO(aaed2000_map_io) - INITIRQ(aaed2000_init_irq) + /* Maintainer: Nicolas Bellido Y Ortega */ + .phys_ram = 0xf0000000, + .phys_io = PIO_BASE, + .io_pg_offst = ((VIO_BASE) >> 18) & 0xfffc, + .map_io = aaed2000_map_io, + .init_irq = aaed2000_init_irq, .timer = &aaec2000_timer, MACHINE_END diff --git a/arch/arm/mach-clps711x/autcpu12.c b/arch/arm/mach-clps711x/autcpu12.c index c106704a2c3..dc73feb1ffb 100644 --- a/arch/arm/mach-clps711x/autcpu12.c +++ b/arch/arm/mach-clps711x/autcpu12.c @@ -59,11 +59,13 @@ void __init autcpu12_map_io(void) } MACHINE_START(AUTCPU12, "autronix autcpu12") - MAINTAINER("Thomas Gleixner") - BOOT_MEM(0xc0000000, 0x80000000, 0xff000000) - BOOT_PARAMS(0xc0020000) - MAPIO(autcpu12_map_io) - INITIRQ(clps711x_init_irq) + /* Maintainer: Thomas Gleixner */ + .phys_ram = 0xc0000000, + .phys_io = 0x80000000, + .io_pg_offst = ((0xff000000) >> 18) & 0xfffc, + .boot_params = 0xc0020000, + .map_io = autcpu12_map_io, + .init_irq = clps711x_init_irq, .timer = &clps711x_timer, MACHINE_END diff --git a/arch/arm/mach-clps711x/cdb89712.c b/arch/arm/mach-clps711x/cdb89712.c index 7664f9cf83b..a46c82cd271 100644 --- a/arch/arm/mach-clps711x/cdb89712.c +++ b/arch/arm/mach-clps711x/cdb89712.c @@ -49,10 +49,12 @@ static void __init cdb89712_map_io(void) } MACHINE_START(CDB89712, "Cirrus-CDB89712") - MAINTAINER("Ray Lehtiniemi") - BOOT_MEM(0xc0000000, 0x80000000, 0xff000000) - BOOT_PARAMS(0xc0000100) - MAPIO(cdb89712_map_io) - INITIRQ(clps711x_init_irq) + /* Maintainer: Ray Lehtiniemi */ + .phys_ram = 0xc0000000, + .phys_io = 0x80000000, + .io_pg_offst = ((0xff000000) >> 18) & 0xfffc, + .boot_params = 0xc0000100, + .map_io = cdb89712_map_io, + .init_irq = clps711x_init_irq, .timer = &clps711x_timer, MACHINE_END diff --git a/arch/arm/mach-clps711x/ceiva.c b/arch/arm/mach-clps711x/ceiva.c index e4093be3c4c..780d9180598 100644 --- a/arch/arm/mach-clps711x/ceiva.c +++ b/arch/arm/mach-clps711x/ceiva.c @@ -53,10 +53,12 @@ static void __init ceiva_map_io(void) MACHINE_START(CEIVA, "CEIVA/Polaroid Photo MAX Digital Picture Frame") - MAINTAINER("Rob Scott") - BOOT_MEM(0xc0000000, 0x80000000, 0xff000000) - BOOT_PARAMS(0xc0000100) - MAPIO(ceiva_map_io) - INITIRQ(clps711x_init_irq) + /* Maintainer: Rob Scott */ + .phys_ram = 0xc0000000, + .phys_io = 0x80000000, + .io_pg_offst = ((0xff000000) >> 18) & 0xfffc, + .boot_params = 0xc0000100, + .map_io = ceiva_map_io, + .init_irq = clps711x_init_irq, .timer = &clps711x_timer, MACHINE_END diff --git a/arch/arm/mach-clps711x/clep7312.c b/arch/arm/mach-clps711x/clep7312.c index 9ca21cb481b..c83f3fd68fc 100644 --- a/arch/arm/mach-clps711x/clep7312.c +++ b/arch/arm/mach-clps711x/clep7312.c @@ -37,12 +37,14 @@ fixup_clep7312(struct machine_desc *desc, struct tag *tags, MACHINE_START(CLEP7212, "Cirrus Logic 7212/7312") - MAINTAINER("Nobody") - BOOT_MEM(0xc0000000, 0x80000000, 0xff000000) - BOOT_PARAMS(0xc0000100) - FIXUP(fixup_clep7312) - MAPIO(clps711x_map_io) - INITIRQ(clps711x_init_irq) + /* Maintainer: Nobody */ + .phys_ram = 0xc0000000, + .phys_io = 0x80000000, + .io_pg_offst = ((0xff000000) >> 18) & 0xfffc, + .boot_params = 0xc0000100, + .fixup = fixup_clep7312, + .map_io = clps711x_map_io, + .init_irq = clps711x_init_irq, .timer = &clps711x_timer, MACHINE_END diff --git a/arch/arm/mach-clps711x/edb7211-arch.c b/arch/arm/mach-clps711x/edb7211-arch.c index c6c46324a2e..255c98b63e1 100644 --- a/arch/arm/mach-clps711x/edb7211-arch.c +++ b/arch/arm/mach-clps711x/edb7211-arch.c @@ -51,11 +51,13 @@ fixup_edb7211(struct machine_desc *desc, struct tag *tags, } MACHINE_START(EDB7211, "CL-EDB7211 (EP7211 eval board)") - MAINTAINER("Jon McClintock") - BOOT_MEM(0xc0000000, 0x80000000, 0xff000000) - BOOT_PARAMS(0xc0020100) /* 0xc0000000 - 0xc001ffff can be video RAM */ - FIXUP(fixup_edb7211) - MAPIO(edb7211_map_io) - INITIRQ(clps711x_init_irq) + /* Maintainer: Jon McClintock */ + .phys_ram = 0xc0000000, + .phys_io = 0x80000000, + .io_pg_offst = ((0xff000000) >> 18) & 0xfffc, + .boot_params = 0xc0020100, /* 0xc0000000 - 0xc001ffff can be video RAM */ + .fixup = fixup_edb7211, + .map_io = edb7211_map_io, + .init_irq = clps711x_init_irq, .timer = &clps711x_timer, MACHINE_END diff --git a/arch/arm/mach-clps711x/fortunet.c b/arch/arm/mach-clps711x/fortunet.c index c1c5b8e0154..f83a59761e0 100644 --- a/arch/arm/mach-clps711x/fortunet.c +++ b/arch/arm/mach-clps711x/fortunet.c @@ -75,11 +75,13 @@ fortunet_fixup(struct machine_desc *desc, struct tag *tags, } MACHINE_START(FORTUNET, "ARM-FortuNet") - MAINTAINER("FortuNet Inc.") - BOOT_MEM(0xc0000000, 0x80000000, 0xf0000000) - BOOT_PARAMS(0x00000000) - FIXUP(fortunet_fixup) - MAPIO(clps711x_map_io) - INITIRQ(clps711x_init_irq) + /* Maintainer: FortuNet Inc. */ + .phys_ram = 0xc0000000, + .phys_io = 0x80000000, + .io_pg_offst = ((0xf0000000) >> 18) & 0xfffc, + .boot_params = 0x00000000, + .fixup = fortunet_fixup, + .map_io = clps711x_map_io, + .init_irq = clps711x_init_irq, .timer = &clps711x_timer, MACHINE_END diff --git a/arch/arm/mach-clps711x/p720t.c b/arch/arm/mach-clps711x/p720t.c index 29269df054f..5bdb90edf99 100644 --- a/arch/arm/mach-clps711x/p720t.c +++ b/arch/arm/mach-clps711x/p720t.c @@ -79,12 +79,14 @@ static void __init p720t_map_io(void) } MACHINE_START(P720T, "ARM-Prospector720T") - MAINTAINER("ARM Ltd/Deep Blue Solutions Ltd") - BOOT_MEM(0xc0000000, 0x80000000, 0xff000000) - BOOT_PARAMS(0xc0000100) - FIXUP(fixup_p720t) - MAPIO(p720t_map_io) - INITIRQ(clps711x_init_irq) + /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ + .phys_ram = 0xc0000000, + .phys_io = 0x80000000, + .io_pg_offst = ((0xff000000) >> 18) & 0xfffc, + .boot_params = 0xc0000100, + .fixup = fixup_p720t, + .map_io = p720t_map_io, + .init_irq = clps711x_init_irq, .timer = &clps711x_timer, MACHINE_END diff --git a/arch/arm/mach-clps7500/core.c b/arch/arm/mach-clps7500/core.c index 90e85f434f6..112f1d68fb2 100644 --- a/arch/arm/mach-clps7500/core.c +++ b/arch/arm/mach-clps7500/core.c @@ -366,11 +366,13 @@ static void __init clps7500_init(void) } MACHINE_START(CLPS7500, "CL-PS7500") - MAINTAINER("Philip Blundell") - BOOT_MEM(0x10000000, 0x03000000, 0xe0000000) - MAPIO(clps7500_map_io) - INITIRQ(clps7500_init_irq) - .init_machine = clps7500_init, - .timer = &clps7500_timer, + /* Maintainer: Philip Blundell */ + .phys_ram = 0x10000000, + .phys_io = 0x03000000, + .io_pg_offst = ((0xe0000000) >> 18) & 0xfffc, + .map_io = clps7500_map_io, + .init_irq = clps7500_init_irq, + .init_machine = clps7500_init, + .timer = &clps7500_timer, MACHINE_END diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c index 86ffdbb5626..23c4da10101 100644 --- a/arch/arm/mach-ebsa110/core.c +++ b/arch/arm/mach-ebsa110/core.c @@ -233,13 +233,15 @@ static int __init ebsa110_init(void) arch_initcall(ebsa110_init); MACHINE_START(EBSA110, "EBSA110") - MAINTAINER("Russell King") - BOOT_MEM(0x00000000, 0xe0000000, 0xe0000000) - BOOT_PARAMS(0x00000400) - DISABLE_PARPORT(0) - DISABLE_PARPORT(2) - SOFT_REBOOT - MAPIO(ebsa110_map_io) - INITIRQ(ebsa110_init_irq) + /* Maintainer: Russell King */ + .phys_ram = 0x00000000, + .phys_io = 0xe0000000, + .io_pg_offst = ((0xe0000000) >> 18) & 0xfffc, + .boot_params = 0x00000400, + .reserve_lp0 = 1, + .reserve_lp2 = 1, + .soft_reboot = 1, + .map_io = ebsa110_map_io, + .init_irq = ebsa110_init_irq, .timer = &ebsa110_timer, MACHINE_END diff --git a/arch/arm/mach-epxa10db/arch.c b/arch/arm/mach-epxa10db/arch.c index 1b40340e8a2..7daa021676d 100644 --- a/arch/arm/mach-epxa10db/arch.c +++ b/arch/arm/mach-epxa10db/arch.c @@ -63,10 +63,12 @@ extern void epxa10db_init_irq(void); extern struct sys_timer epxa10db_timer; MACHINE_START(CAMELOT, "Altera Epxa10db") - MAINTAINER("Altera Corporation") - BOOT_MEM(0x00000000, 0x7fffc000, 0xffffc000) - MAPIO(epxa10db_map_io) - INITIRQ(epxa10db_init_irq) + /* Maintainer: Altera Corporation */ + .phys_ram = 0x00000000, + .phys_io = 0x7fffc000, + .io_pg_offst = ((0xffffc000) >> 18) & 0xfffc, + .map_io = epxa10db_map_io, + .init_irq = epxa10db_init_irq, .timer = &epxa10db_timer, MACHINE_END diff --git a/arch/arm/mach-footbridge/cats-hw.c b/arch/arm/mach-footbridge/cats-hw.c index d1ced86c379..49b898af003 100644 --- a/arch/arm/mach-footbridge/cats-hw.c +++ b/arch/arm/mach-footbridge/cats-hw.c @@ -84,12 +84,14 @@ fixup_cats(struct machine_desc *desc, struct tag *tags, } MACHINE_START(CATS, "Chalice-CATS") - MAINTAINER("Philip Blundell") - BOOT_MEM(0x00000000, DC21285_ARMCSR_BASE, 0xfe000000) - BOOT_PARAMS(0x00000100) - SOFT_REBOOT - FIXUP(fixup_cats) - MAPIO(footbridge_map_io) - INITIRQ(footbridge_init_irq) + /* Maintainer: Philip Blundell */ + .phys_ram = 0x00000000, + .phys_io = DC21285_ARMCSR_BASE, + .io_pg_offst = ((0xfe000000) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .soft_reboot = 1, + .fixup = fixup_cats, + .map_io = footbridge_map_io, + .init_irq = footbridge_init_irq, .timer = &isa_timer, MACHINE_END diff --git a/arch/arm/mach-footbridge/co285.c b/arch/arm/mach-footbridge/co285.c index e1541914fdc..548a7908168 100644 --- a/arch/arm/mach-footbridge/co285.c +++ b/arch/arm/mach-footbridge/co285.c @@ -28,11 +28,13 @@ fixup_coebsa285(struct machine_desc *desc, struct tag *tags, } MACHINE_START(CO285, "co-EBSA285") - MAINTAINER("Mark van Doesburg") - BOOT_MEM(0x00000000, DC21285_ARMCSR_BASE, 0x7cf00000) - FIXUP(fixup_coebsa285) - MAPIO(footbridge_map_io) - INITIRQ(footbridge_init_irq) + /* Maintainer: Mark van Doesburg */ + .phys_ram = 0x00000000, + .phys_io = DC21285_ARMCSR_BASE, + .io_pg_offst = ((0x7cf00000) >> 18) & 0xfffc, + .fixup = fixup_coebsa285, + .map_io = footbridge_map_io, + .init_irq = footbridge_init_irq, .timer = &footbridge_timer, MACHINE_END diff --git a/arch/arm/mach-footbridge/ebsa285.c b/arch/arm/mach-footbridge/ebsa285.c index d0931f5a63c..1c37605268d 100644 --- a/arch/arm/mach-footbridge/ebsa285.c +++ b/arch/arm/mach-footbridge/ebsa285.c @@ -13,12 +13,15 @@ #include "common.h" MACHINE_START(EBSA285, "EBSA285") - MAINTAINER("Russell King") - BOOT_MEM(0x00000000, DC21285_ARMCSR_BASE, 0xfe000000) - BOOT_PARAMS(0x00000100) - VIDEO(0x000a0000, 0x000bffff) - MAPIO(footbridge_map_io) - INITIRQ(footbridge_init_irq) + /* Maintainer: Russell King */ + .phys_ram = 0x00000000, + .phys_io = DC21285_ARMCSR_BASE, + .io_pg_offst = ((0xfe000000) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .video_start = 0x000a0000, + .video_end = 0x000bffff, + .map_io = footbridge_map_io, + .init_irq = footbridge_init_irq, .timer = &footbridge_timer, MACHINE_END diff --git a/arch/arm/mach-footbridge/netwinder-hw.c b/arch/arm/mach-footbridge/netwinder-hw.c index 1e1dfd79f4f..775f85fc851 100644 --- a/arch/arm/mach-footbridge/netwinder-hw.c +++ b/arch/arm/mach-footbridge/netwinder-hw.c @@ -647,14 +647,17 @@ fixup_netwinder(struct machine_desc *desc, struct tag *tags, } MACHINE_START(NETWINDER, "Rebel-NetWinder") - MAINTAINER("Russell King/Rebel.com") - BOOT_MEM(0x00000000, DC21285_ARMCSR_BASE, 0xfe000000) - BOOT_PARAMS(0x00000100) - VIDEO(0x000a0000, 0x000bffff) - DISABLE_PARPORT(0) - DISABLE_PARPORT(2) - FIXUP(fixup_netwinder) - MAPIO(footbridge_map_io) - INITIRQ(footbridge_init_irq) + /* Maintainer: Russell King/Rebel.com */ + .phys_ram = 0x00000000, + .phys_io = DC21285_ARMCSR_BASE, + .io_pg_offst = ((0xfe000000) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .video_start = 0x000a0000, + .video_end = 0x000bffff, + .reserve_lp0 = 1, + .reserve_lp2 = 1, + .fixup = fixup_netwinder, + .map_io = footbridge_map_io, + .init_irq = footbridge_init_irq, .timer = &isa_timer, MACHINE_END diff --git a/arch/arm/mach-footbridge/personal.c b/arch/arm/mach-footbridge/personal.c index 415086d7bbe..0146b8bb59d 100644 --- a/arch/arm/mach-footbridge/personal.c +++ b/arch/arm/mach-footbridge/personal.c @@ -13,11 +13,13 @@ #include "common.h" MACHINE_START(PERSONAL_SERVER, "Compaq-PersonalServer") - MAINTAINER("Jamey Hicks / George France") - BOOT_MEM(0x00000000, DC21285_ARMCSR_BASE, 0xfe000000) - BOOT_PARAMS(0x00000100) - MAPIO(footbridge_map_io) - INITIRQ(footbridge_init_irq) + /* Maintainer: Jamey Hicks / George France */ + .phys_ram = 0x00000000, + .phys_io = DC21285_ARMCSR_BASE, + .io_pg_offst = ((0xfe000000) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .map_io = footbridge_map_io, + .init_irq = footbridge_init_irq, .timer = &footbridge_timer, MACHINE_END diff --git a/arch/arm/mach-h720x/h7201-eval.c b/arch/arm/mach-h720x/h7201-eval.c index 9b24b9b0db1..fa59e9e2a5c 100644 --- a/arch/arm/mach-h720x/h7201-eval.c +++ b/arch/arm/mach-h720x/h7201-eval.c @@ -30,10 +30,12 @@ #include "common.h" MACHINE_START(H7201, "Hynix GMS30C7201") - MAINTAINER("Robert Schwebel, Pengutronix") - BOOT_MEM(0x40000000, 0x80000000, 0xf0000000) - BOOT_PARAMS(0xc0001000) - MAPIO(h720x_map_io) - INITIRQ(h720x_init_irq) - .timer = &h7201_timer, + /* Maintainer: Robert Schwebel, Pengutronix */ + .phys_ram = 0x40000000, + .phys_io = 0x80000000, + .io_pg_offst = ((0xf0000000) >> 18) & 0xfffc, + .boot_params = 0xc0001000, + .map_io = h720x_map_io, + .init_irq = h720x_init_irq, + .timer = &h7201_timer, MACHINE_END diff --git a/arch/arm/mach-h720x/h7202-eval.c b/arch/arm/mach-h720x/h7202-eval.c index 3456a00d5f5..db9078ad008 100644 --- a/arch/arm/mach-h720x/h7202-eval.c +++ b/arch/arm/mach-h720x/h7202-eval.c @@ -71,11 +71,13 @@ static void __init init_eval_h7202(void) } MACHINE_START(H7202, "Hynix HMS30C7202") - MAINTAINER("Robert Schwebel, Pengutronix") - BOOT_MEM(0x40000000, 0x80000000, 0xf0000000) - BOOT_PARAMS(0x40000100) - MAPIO(h720x_map_io) - INITIRQ(h7202_init_irq) - .timer = &h7202_timer, - INIT_MACHINE(init_eval_h7202) + /* Maintainer: Robert Schwebel, Pengutronix */ + .phys_ram = 0x40000000, + .phys_io = 0x80000000, + .io_pg_offst = ((0xf0000000) >> 18) & 0xfffc, + .boot_params = 0x40000100, + .map_io = h720x_map_io, + .init_irq = h7202_init_irq, + .timer = &h7202_timer, + .init_machine = init_eval_h7202, MACHINE_END diff --git a/arch/arm/mach-imx/mx1ads.c b/arch/arm/mach-imx/mx1ads.c index 625dd01c257..5d25434d332 100644 --- a/arch/arm/mach-imx/mx1ads.c +++ b/arch/arm/mach-imx/mx1ads.c @@ -78,11 +78,13 @@ mx1ads_map_io(void) } MACHINE_START(MX1ADS, "Motorola MX1ADS") - MAINTAINER("Sascha Hauer, Pengutronix") - BOOT_MEM(0x08000000, 0x00200000, 0xe0200000) - BOOT_PARAMS(0x08000100) - MAPIO(mx1ads_map_io) - INITIRQ(imx_init_irq) + /* Maintainer: Sascha Hauer, Pengutronix */ + .phys_ram = 0x08000000, + .phys_io = 0x00200000, + .io_pg_offst = ((0xe0200000) >> 18) & 0xfffc, + .boot_params = 0x08000100, + .map_io = mx1ads_map_io, + .init_irq = imx_init_irq, .timer = &imx_timer, - INIT_MACHINE(mx1ads_init) + .init_machine = mx1ads_init, MACHINE_END diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index 91ba9fd79c8..36e2b6eb67b 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -292,11 +292,13 @@ static struct sys_timer ap_timer = { }; MACHINE_START(INTEGRATOR, "ARM-Integrator") - MAINTAINER("ARM Ltd/Deep Blue Solutions Ltd") - BOOT_MEM(0x00000000, 0x16000000, 0xf1600000) - BOOT_PARAMS(0x00000100) - MAPIO(ap_map_io) - INITIRQ(ap_init_irq) + /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ + .phys_ram = 0x00000000, + .phys_io = 0x16000000, + .io_pg_offst = ((0xf1600000) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .map_io = ap_map_io, + .init_irq = ap_init_irq, .timer = &ap_timer, - INIT_MACHINE(ap_init) + .init_machine = ap_init, MACHINE_END diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c index e0a01eef099..569f328c479 100644 --- a/arch/arm/mach-integrator/integrator_cp.c +++ b/arch/arm/mach-integrator/integrator_cp.c @@ -532,11 +532,13 @@ static struct sys_timer cp_timer = { }; MACHINE_START(CINTEGRATOR, "ARM-IntegratorCP") - MAINTAINER("ARM Ltd/Deep Blue Solutions Ltd") - BOOT_MEM(0x00000000, 0x16000000, 0xf1600000) - BOOT_PARAMS(0x00000100) - MAPIO(intcp_map_io) - INITIRQ(intcp_init_irq) + /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ + .phys_ram = 0x00000000, + .phys_io = 0x16000000, + .io_pg_offst = ((0xf1600000) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .map_io = intcp_map_io, + .init_irq = intcp_init_irq, .timer = &cp_timer, - INIT_MACHINE(intcp_init) + .init_machine = intcp_init, MACHINE_END diff --git a/arch/arm/mach-iop3xx/iop321-setup.c b/arch/arm/mach-iop3xx/iop321-setup.c index bf23e0fd284..0f921ba2750 100644 --- a/arch/arm/mach-iop3xx/iop321-setup.c +++ b/arch/arm/mach-iop3xx/iop321-setup.c @@ -146,23 +146,27 @@ extern void iop321_init_time(void); #if defined(CONFIG_ARCH_IQ80321) MACHINE_START(IQ80321, "Intel IQ80321") - MAINTAINER("Intel Corporation") - BOOT_MEM(PHYS_OFFSET, IQ80321_UART, IQ80321_UART) - MAPIO(iq80321_map_io) - INITIRQ(iop321_init_irq) + /* Maintainer: Intel Corporation */ + .phys_ram = PHYS_OFFSET, + .phys_io = IQ80321_UART, + .io_pg_offst = ((IQ80321_UART) >> 18) & 0xfffc, + .map_io = iq80321_map_io, + .init_irq = iop321_init_irq, .timer = &iop321_timer, - BOOT_PARAMS(0xa0000100) - INIT_MACHINE(iop32x_init) + .boot_params = 0xa0000100, + .init_machine = iop32x_init, MACHINE_END #elif defined(CONFIG_ARCH_IQ31244) MACHINE_START(IQ31244, "Intel IQ31244") - MAINTAINER("Intel Corp.") - BOOT_MEM(PHYS_OFFSET, IQ31244_UART, IQ31244_UART) - MAPIO(iq31244_map_io) - INITIRQ(iop321_init_irq) + /* Maintainer: Intel Corp. */ + .phys_ram = PHYS_OFFSET, + .phys_io = IQ31244_UART, + .io_pg_offst = ((IQ31244_UART) >> 18) & 0xfffc, + .map_io = iq31244_map_io, + .init_irq = iop321_init_irq, .timer = &iop321_timer, - BOOT_PARAMS(0xa0000100) - INIT_MACHINE(iop32x_init) + .boot_params = 0xa0000100, + .init_machine = iop32x_init, MACHINE_END #else #error No machine descriptor defined for this IOP3XX implementation diff --git a/arch/arm/mach-iop3xx/iop331-setup.c b/arch/arm/mach-iop3xx/iop331-setup.c index 622e7914819..fc74b722f72 100644 --- a/arch/arm/mach-iop3xx/iop331-setup.c +++ b/arch/arm/mach-iop3xx/iop331-setup.c @@ -148,26 +148,28 @@ extern void iq80332_map_io(void); #if defined(CONFIG_ARCH_IQ80331) MACHINE_START(IQ80331, "Intel IQ80331") - MAINTAINER("Intel Corp.") - BOOT_MEM(PHYS_OFFSET, 0xfefff000, 0xfffff000) // virtual, physical - //BOOT_MEM(PHYS_OFFSET, IOP331_UART0_VIRT, IOP331_UART0_PHYS) - MAPIO(iq80331_map_io) - INITIRQ(iop331_init_irq) + /* Maintainer: Intel Corp. */ + .phys_ram = PHYS_OFFSET, + .phys_io = 0xfefff000, + .io_pg_offst = ((0xfffff000) >> 18) & 0xfffc, // virtual, physical + .map_io = iq80331_map_io, + .init_irq = iop331_init_irq, .timer = &iop331_timer, - BOOT_PARAMS(0x0100) - INIT_MACHINE(iop33x_init) + .boot_params = 0x0100, + .init_machine = iop33x_init, MACHINE_END #elif defined(CONFIG_MACH_IQ80332) MACHINE_START(IQ80332, "Intel IQ80332") - MAINTAINER("Intel Corp.") - BOOT_MEM(PHYS_OFFSET, 0xfefff000, 0xfffff000) // virtual, physical - //BOOT_MEM(PHYS_OFFSET, IOP331_UART0_VIRT, IOP331_UART0_PHYS) - MAPIO(iq80332_map_io) - INITIRQ(iop331_init_irq) + /* Maintainer: Intel Corp. */ + .phys_ram = PHYS_OFFSET, + .phys_io = 0xfefff000, + .io_pg_offst = ((0xfffff000) >> 18) & 0xfffc, // virtual, physical + .map_io = iq80332_map_io, + .init_irq = iop331_init_irq, .timer = &iop331_timer, - BOOT_PARAMS(0x0100) - INIT_MACHINE(iop33x_init) + .boot_params = 0x0100, + .init_machine = iop33x_init, MACHINE_END #else diff --git a/arch/arm/mach-ixp2000/enp2611.c b/arch/arm/mach-ixp2000/enp2611.c index f3a291b6a9f..b7ebf3898fc 100644 --- a/arch/arm/mach-ixp2000/enp2611.c +++ b/arch/arm/mach-ixp2000/enp2611.c @@ -223,13 +223,15 @@ static void __init enp2611_init_machine(void) MACHINE_START(ENP2611, "Radisys ENP-2611 PCI network processor board") - MAINTAINER("Lennert Buytenhek ") - BOOT_MEM(0x00000000, IXP2000_UART_PHYS_BASE, IXP2000_UART_VIRT_BASE) - BOOT_PARAMS(0x00000100) - MAPIO(ixp2000_map_io) - INITIRQ(ixp2000_init_irq) + /* Maintainer: Lennert Buytenhek */ + .phys_ram = 0x00000000, + .phys_io = IXP2000_UART_PHYS_BASE, + .io_pg_offst = ((IXP2000_UART_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .map_io = ixp2000_map_io, + .init_irq = ixp2000_init_irq, .timer = &enp2611_timer, - INIT_MACHINE(enp2611_init_machine) + .init_machine = enp2611_init_machine, MACHINE_END diff --git a/arch/arm/mach-ixp2000/ixdp2400.c b/arch/arm/mach-ixp2000/ixdp2400.c index df3ff26c8cd..fd280a93637 100644 --- a/arch/arm/mach-ixp2000/ixdp2400.c +++ b/arch/arm/mach-ixp2000/ixdp2400.c @@ -168,12 +168,14 @@ void ixdp2400_init_irq(void) } MACHINE_START(IXDP2400, "Intel IXDP2400 Development Platform") - MAINTAINER("MontaVista Software, Inc.") - BOOT_MEM(0x00000000, IXP2000_UART_PHYS_BASE, IXP2000_UART_VIRT_BASE) - BOOT_PARAMS(0x00000100) - MAPIO(ixdp2x00_map_io) - INITIRQ(ixdp2400_init_irq) + /* Maintainer: MontaVista Software, Inc. */ + .phys_ram = 0x00000000, + .phys_io = IXP2000_UART_PHYS_BASE, + .io_pg_offst = ((IXP2000_UART_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .map_io = ixdp2x00_map_io, + .init_irq = ixdp2400_init_irq, .timer = &ixdp2400_timer, - INIT_MACHINE(ixdp2x00_init_machine) + .init_machine = ixdp2x00_init_machine, MACHINE_END diff --git a/arch/arm/mach-ixp2000/ixdp2800.c b/arch/arm/mach-ixp2000/ixdp2800.c index 468a4bbfb72..f9073aa2861 100644 --- a/arch/arm/mach-ixp2000/ixdp2800.c +++ b/arch/arm/mach-ixp2000/ixdp2800.c @@ -284,12 +284,14 @@ void ixdp2800_init_irq(void) } MACHINE_START(IXDP2800, "Intel IXDP2800 Development Platform") - MAINTAINER("MontaVista Software, Inc.") - BOOT_MEM(0x00000000, IXP2000_UART_PHYS_BASE, IXP2000_UART_VIRT_BASE) - BOOT_PARAMS(0x00000100) - MAPIO(ixdp2x00_map_io) - INITIRQ(ixdp2800_init_irq) + /* Maintainer: MontaVista Software, Inc. */ + .phys_ram = 0x00000000, + .phys_io = IXP2000_UART_PHYS_BASE, + .io_pg_offst = ((IXP2000_UART_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .map_io = ixdp2x00_map_io, + .init_irq = ixdp2800_init_irq, .timer = &ixdp2800_timer, - INIT_MACHINE(ixdp2x00_init_machine) + .init_machine = ixdp2x00_init_machine, MACHINE_END diff --git a/arch/arm/mach-ixp2000/ixdp2x01.c b/arch/arm/mach-ixp2000/ixdp2x01.c index e94dace3d41..c73588743ee 100644 --- a/arch/arm/mach-ixp2000/ixdp2x01.c +++ b/arch/arm/mach-ixp2000/ixdp2x01.c @@ -375,25 +375,29 @@ static void __init ixdp2x01_init_machine(void) #ifdef CONFIG_ARCH_IXDP2401 MACHINE_START(IXDP2401, "Intel IXDP2401 Development Platform") - MAINTAINER("MontaVista Software, Inc.") - BOOT_MEM(0x00000000, IXP2000_UART_PHYS_BASE, IXP2000_UART_VIRT_BASE) - BOOT_PARAMS(0x00000100) - MAPIO(ixdp2x01_map_io) - INITIRQ(ixdp2x01_init_irq) + /* Maintainer: MontaVista Software, Inc. */ + .phys_ram = 0x00000000, + .phys_io = IXP2000_UART_PHYS_BASE, + .io_pg_offst = ((IXP2000_UART_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .map_io = ixdp2x01_map_io, + .init_irq = ixdp2x01_init_irq, .timer = &ixdp2x01_timer, - INIT_MACHINE(ixdp2x01_init_machine) + .init_machine = ixdp2x01_init_machine, MACHINE_END #endif #ifdef CONFIG_ARCH_IXDP2801 MACHINE_START(IXDP2801, "Intel IXDP2801 Development Platform") - MAINTAINER("MontaVista Software, Inc.") - BOOT_MEM(0x00000000, IXP2000_UART_PHYS_BASE, IXP2000_UART_VIRT_BASE) - BOOT_PARAMS(0x00000100) - MAPIO(ixdp2x01_map_io) - INITIRQ(ixdp2x01_init_irq) + /* Maintainer: MontaVista Software, Inc. */ + .phys_ram = 0x00000000, + .phys_io = IXP2000_UART_PHYS_BASE, + .io_pg_offst = ((IXP2000_UART_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .map_io = ixdp2x01_map_io, + .init_irq = ixdp2x01_init_irq, .timer = &ixdp2x01_timer, - INIT_MACHINE(ixdp2x01_init_machine) + .init_machine = ixdp2x01_init_machine, MACHINE_END #endif diff --git a/arch/arm/mach-ixp4xx/coyote-setup.c b/arch/arm/mach-ixp4xx/coyote-setup.c index 8a05a1227e5..c6335f51907 100644 --- a/arch/arm/mach-ixp4xx/coyote-setup.c +++ b/arch/arm/mach-ixp4xx/coyote-setup.c @@ -100,14 +100,15 @@ static void __init coyote_init(void) #ifdef CONFIG_ARCH_ADI_COYOTE MACHINE_START(ADI_COYOTE, "ADI Engineering Coyote") - MAINTAINER("MontaVista Software, Inc.") - BOOT_MEM(PHYS_OFFSET, IXP4XX_PERIPHERAL_BASE_PHYS, - IXP4XX_PERIPHERAL_BASE_VIRT) - MAPIO(coyote_map_io) - INITIRQ(ixp4xx_init_irq) + /* Maintainer: MontaVista Software, Inc. */ + .phys_ram = PHYS_OFFSET, + .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, + .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, + .map_io = coyote_map_io, + .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, - BOOT_PARAMS(0x0100) - INIT_MACHINE(coyote_init) + .boot_params = 0x0100, + .init_machine = coyote_init, MACHINE_END #endif @@ -117,14 +118,15 @@ MACHINE_END */ #ifdef CONFIG_MACH_IXDPG425 MACHINE_START(IXDPG425, "Intel IXDPG425") - MAINTAINER("MontaVista Software, Inc.") - BOOT_MEM(PHYS_OFFSET, IXP4XX_PERIPHERAL_BASE_PHYS, - IXP4XX_PERIPHERAL_BASE_VIRT) - MAPIO(coyote_map_io) - INITIRQ(ixp4xx_init_irq) + /* Maintainer: MontaVista Software, Inc. */ + .phys_ram = PHYS_OFFSET, + .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, + .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, + .map_io = coyote_map_io, + .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, - BOOT_PARAMS(0x0100) - INIT_MACHINE(coyote_init) + .boot_params = 0x0100, + .init_machine = coyote_init, MACHINE_END #endif diff --git a/arch/arm/mach-ixp4xx/gtwx5715-setup.c b/arch/arm/mach-ixp4xx/gtwx5715-setup.c index e77c86efd21..8ba1cd9406e 100644 --- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c +++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c @@ -140,14 +140,15 @@ static void __init gtwx5715_init(void) MACHINE_START(GTWX5715, "Gemtek GTWX5715 (Linksys WRV54G)") - MAINTAINER("George Joseph") - BOOT_MEM(PHYS_OFFSET, IXP4XX_UART2_BASE_PHYS, - IXP4XX_UART2_BASE_VIRT) - MAPIO(gtwx5715_map_io) - INITIRQ(ixp4xx_init_irq) - .timer = &ixp4xx_timer, - BOOT_PARAMS(0x0100) - INIT_MACHINE(gtwx5715_init) + /* Maintainer: George Joseph */ + .phys_ram = PHYS_OFFSET, + .phys_io = IXP4XX_UART2_BASE_PHYS, + .io_pg_offst = ((IXP4XX_UART2_BASE_VIRT) >> 18) & 0xfffc, + .map_io = gtwx5715_map_io, + .init_irq = ixp4xx_init_irq, + .timer = &ixp4xx_timer, + .boot_params = 0x0100, + .init_machine = gtwx5715_init, MACHINE_END diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c index 77346c1f676..f2e9c0ea050 100644 --- a/arch/arm/mach-ixp4xx/ixdp425-setup.c +++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c @@ -128,36 +128,39 @@ static void __init ixdp425_init(void) } MACHINE_START(IXDP425, "Intel IXDP425 Development Platform") - MAINTAINER("MontaVista Software, Inc.") - BOOT_MEM(PHYS_OFFSET, IXP4XX_PERIPHERAL_BASE_PHYS, - IXP4XX_PERIPHERAL_BASE_VIRT) - MAPIO(ixdp425_map_io) - INITIRQ(ixp4xx_init_irq) + /* Maintainer: MontaVista Software, Inc. */ + .phys_ram = PHYS_OFFSET, + .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, + .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, + .map_io = ixdp425_map_io, + .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, - BOOT_PARAMS(0x0100) - INIT_MACHINE(ixdp425_init) + .boot_params = 0x0100, + .init_machine = ixdp425_init, MACHINE_END MACHINE_START(IXDP465, "Intel IXDP465 Development Platform") - MAINTAINER("MontaVista Software, Inc.") - BOOT_MEM(PHYS_OFFSET, IXP4XX_PERIPHERAL_BASE_PHYS, - IXP4XX_PERIPHERAL_BASE_VIRT) - MAPIO(ixdp425_map_io) - INITIRQ(ixp4xx_init_irq) + /* Maintainer: MontaVista Software, Inc. */ + .phys_ram = PHYS_OFFSET, + .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, + .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, + .map_io = ixdp425_map_io, + .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, - BOOT_PARAMS(0x0100) - INIT_MACHINE(ixdp425_init) + .boot_params = 0x0100, + .init_machine = ixdp425_init, MACHINE_END MACHINE_START(IXCDP1100, "Intel IXCDP1100 Development Platform") - MAINTAINER("MontaVista Software, Inc.") - BOOT_MEM(PHYS_OFFSET, IXP4XX_PERIPHERAL_BASE_PHYS, - IXP4XX_PERIPHERAL_BASE_VIRT) - MAPIO(ixdp425_map_io) - INITIRQ(ixp4xx_init_irq) + /* Maintainer: MontaVista Software, Inc. */ + .phys_ram = PHYS_OFFSET, + .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, + .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, + .map_io = ixdp425_map_io, + .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, - BOOT_PARAMS(0x0100) - INIT_MACHINE(ixdp425_init) + .boot_params = 0x0100, + .init_machine = ixdp425_init, MACHINE_END /* @@ -168,14 +171,15 @@ MACHINE_END */ #ifdef CONFIG_ARCH_AVILA MACHINE_START(AVILA, "Gateworks Avila Network Platform") - MAINTAINER("Deepak Saxena ") - BOOT_MEM(PHYS_OFFSET, IXP4XX_PERIPHERAL_BASE_PHYS, - IXP4XX_PERIPHERAL_BASE_VIRT) - MAPIO(ixdp425_map_io) - INITIRQ(ixp4xx_init_irq) + /* Maintainer: Deepak Saxena */ + .phys_ram = PHYS_OFFSET, + .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, + .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, + .map_io = ixdp425_map_io, + .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, - BOOT_PARAMS(0x0100) - INIT_MACHINE(ixdp425_init) + .boot_params = 0x0100, + .init_machine = ixdp425_init, MACHINE_END #endif diff --git a/arch/arm/mach-l7200/core.c b/arch/arm/mach-l7200/core.c index 606ca95f821..2a7fee2a763 100644 --- a/arch/arm/mach-l7200/core.c +++ b/arch/arm/mach-l7200/core.c @@ -81,9 +81,11 @@ static void __init l7200_map_io(void) } MACHINE_START(L7200, "LinkUp Systems L7200") - MAINTAINER("Steve Hill / Scott McConnell") - BOOT_MEM(0xf0000000, 0x80040000, 0xd0000000) - MAPIO(l7200_map_io) - INITIRQ(l7200_init_irq) + /* Maintainer: Steve Hill / Scott McConnell */ + .phys_ram = 0xf0000000, + .phys_io = 0x80040000, + .io_pg_offst = ((0xd0000000) >> 18) & 0xfffc, + .map_io = l7200_map_io, + .init_irq = l7200_init_irq, MACHINE_END diff --git a/arch/arm/mach-lh7a40x/arch-kev7a400.c b/arch/arm/mach-lh7a40x/arch-kev7a400.c index be5d17fe9dc..cb3dcd3bd00 100644 --- a/arch/arm/mach-lh7a40x/arch-kev7a400.c +++ b/arch/arm/mach-lh7a40x/arch-kev7a400.c @@ -102,10 +102,12 @@ void __init lh7a40x_init_board_irq (void) } MACHINE_START (KEV7A400, "Sharp KEV7a400") - MAINTAINER ("Marc Singer") - BOOT_MEM (0xc0000000, 0x80000000, io_p2v (0x80000000)) - BOOT_PARAMS (0xc0000100) - MAPIO (kev7a400_map_io) - INITIRQ (lh7a400_init_irq) + /* Maintainer: Marc Singer */ + .phys_ram = 0xc0000000, + .phys_io = 0x80000000, + .io_pg_offst = ((io_p2v (0x80000000))>>18) & 0xfffc, + .boot_params = 0xc0000100, + .map_io = kev7a400_map_io, + .init_irq = lh7a400_init_irq, .timer = &lh7a40x_timer, MACHINE_END diff --git a/arch/arm/mach-lh7a40x/arch-lpd7a40x.c b/arch/arm/mach-lh7a40x/arch-lpd7a40x.c index c823447a150..6eb61a17c63 100644 --- a/arch/arm/mach-lh7a40x/arch-lpd7a40x.c +++ b/arch/arm/mach-lh7a40x/arch-lpd7a40x.c @@ -260,13 +260,15 @@ lpd7a400_map_io(void) #ifdef CONFIG_MACH_LPD7A400 MACHINE_START (LPD7A400, "Logic Product Development LPD7A400-10") - MAINTAINER ("Marc Singer") - BOOT_MEM (0xc0000000, 0x80000000, io_p2v (0x80000000)) - BOOT_PARAMS (0xc0000100) - MAPIO (lpd7a400_map_io) - INITIRQ (lh7a400_init_irq) + /* Maintainer: Marc Singer */ + .phys_ram = 0xc0000000, + .phys_io = 0x80000000, + .io_pg_offst = ((io_p2v (0x80000000))>>18) & 0xfffc, + .boot_params = 0xc0000100, + .map_io = lpd7a400_map_io, + .init_irq = lh7a400_init_irq, .timer = &lh7a40x_timer, - INIT_MACHINE (lpd7a40x_init) + .init_machine = lpd7a40x_init, MACHINE_END #endif @@ -274,13 +276,15 @@ MACHINE_END #ifdef CONFIG_MACH_LPD7A404 MACHINE_START (LPD7A404, "Logic Product Development LPD7A404-10") - MAINTAINER ("Marc Singer") - BOOT_MEM (0xc0000000, 0x80000000, io_p2v (0x80000000)) - BOOT_PARAMS (0xc0000100) - MAPIO (lpd7a400_map_io) - INITIRQ (lh7a404_init_irq) + /* Maintainer: Marc Singer */ + .phys_ram = 0xc0000000, + .phys_io = 0x80000000, + .io_pg_offst = ((io_p2v (0x80000000))>>18) & 0xfffc, + .boot_params = 0xc0000100, + .map_io = lpd7a400_map_io, + .init_irq = lh7a404_init_irq, .timer = &lh7a40x_timer, - INIT_MACHINE (lpd7a40x_init) + .init_machine = lpd7a40x_init, MACHINE_END #endif diff --git a/arch/arm/mach-omap/board-generic.c b/arch/arm/mach-omap/board-generic.c index 2102a2cd101..384bc7cec1d 100644 --- a/arch/arm/mach-omap/board-generic.c +++ b/arch/arm/mach-omap/board-generic.c @@ -88,11 +88,13 @@ static void __init omap_generic_map_io(void) } MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710") - MAINTAINER("Tony Lindgren ") - BOOT_MEM(0x10000000, 0xfff00000, 0xfef00000) - BOOT_PARAMS(0x10000100) - MAPIO(omap_generic_map_io) - INITIRQ(omap_generic_init_irq) - INIT_MACHINE(omap_generic_init) + /* Maintainer: Tony Lindgren */ + .phys_ram = 0x10000000, + .phys_io = 0xfff00000, + .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, + .boot_params = 0x10000100, + .map_io = omap_generic_map_io, + .init_irq = omap_generic_init_irq, + .init_machine = omap_generic_init, .timer = &omap_timer, MACHINE_END diff --git a/arch/arm/mach-omap/board-h2.c b/arch/arm/mach-omap/board-h2.c index 1f067830d1f..f37c76a9b16 100644 --- a/arch/arm/mach-omap/board-h2.c +++ b/arch/arm/mach-omap/board-h2.c @@ -177,11 +177,13 @@ static void __init h2_map_io(void) } MACHINE_START(OMAP_H2, "TI-H2") - MAINTAINER("Imre Deak ") - BOOT_MEM(0x10000000, 0xfff00000, 0xfef00000) - BOOT_PARAMS(0x10000100) - MAPIO(h2_map_io) - INITIRQ(h2_init_irq) - INIT_MACHINE(h2_init) + /* Maintainer: Imre Deak */ + .phys_ram = 0x10000000, + .phys_io = 0xfff00000, + .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, + .boot_params = 0x10000100, + .map_io = h2_map_io, + .init_irq = h2_init_irq, + .init_machine = h2_init, .timer = &omap_timer, MACHINE_END diff --git a/arch/arm/mach-omap/board-h3.c b/arch/arm/mach-omap/board-h3.c index 486a5a006c9..705e48594e9 100644 --- a/arch/arm/mach-omap/board-h3.c +++ b/arch/arm/mach-omap/board-h3.c @@ -195,11 +195,13 @@ static void __init h3_map_io(void) } MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board") - MAINTAINER("Texas Instruments, Inc.") - BOOT_MEM(0x10000000, 0xfff00000, 0xfef00000) - BOOT_PARAMS(0x10000100) - MAPIO(h3_map_io) - INITIRQ(h3_init_irq) - INIT_MACHINE(h3_init) + /* Maintainer: Texas Instruments, Inc. */ + .phys_ram = 0x10000000, + .phys_io = 0xfff00000, + .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, + .boot_params = 0x10000100, + .map_io = h3_map_io, + .init_irq = h3_init_irq, + .init_machine = h3_init, .timer = &omap_timer, MACHINE_END diff --git a/arch/arm/mach-omap/board-innovator.c b/arch/arm/mach-omap/board-innovator.c index 57cf4da88d5..523363f18cc 100644 --- a/arch/arm/mach-omap/board-innovator.c +++ b/arch/arm/mach-omap/board-innovator.c @@ -270,11 +270,13 @@ static void __init innovator_map_io(void) } MACHINE_START(OMAP_INNOVATOR, "TI-Innovator") - MAINTAINER("MontaVista Software, Inc.") - BOOT_MEM(0x10000000, 0xfff00000, 0xfef00000) - BOOT_PARAMS(0x10000100) - MAPIO(innovator_map_io) - INITIRQ(innovator_init_irq) - INIT_MACHINE(innovator_init) + /* Maintainer: MontaVista Software, Inc. */ + .phys_ram = 0x10000000, + .phys_io = 0xfff00000, + .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, + .boot_params = 0x10000100, + .map_io = innovator_map_io, + .init_irq = innovator_init_irq, + .init_machine = innovator_init, .timer = &omap_timer, MACHINE_END diff --git a/arch/arm/mach-omap/board-netstar.c b/arch/arm/mach-omap/board-netstar.c index 54acbd215c4..8c653734d5a 100644 --- a/arch/arm/mach-omap/board-netstar.c +++ b/arch/arm/mach-omap/board-netstar.c @@ -141,11 +141,13 @@ static int __init netstar_late_init(void) postcore_initcall(netstar_late_init); MACHINE_START(NETSTAR, "NetStar OMAP5910") - MAINTAINER("Ladislav Michl ") - BOOT_MEM(0x10000000, 0xfff00000, 0xfef00000) - BOOT_PARAMS(0x10000100) - MAPIO(netstar_map_io) - INITIRQ(netstar_init_irq) - INIT_MACHINE(netstar_init) - .timer = &omap_timer, + /* Maintainer: Ladislav Michl */ + .phys_ram = 0x10000000, + .phys_io = 0xfff00000, + .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, + .boot_params = 0x10000100, + .map_io = netstar_map_io, + .init_irq = netstar_init_irq, + .init_machine = netstar_init, + .timer = &omap_timer, MACHINE_END diff --git a/arch/arm/mach-omap/board-osk.c b/arch/arm/mach-omap/board-osk.c index a951fc82459..cb433436aa0 100644 --- a/arch/arm/mach-omap/board-osk.c +++ b/arch/arm/mach-omap/board-osk.c @@ -159,11 +159,13 @@ static void __init osk_map_io(void) } MACHINE_START(OMAP_OSK, "TI-OSK") - MAINTAINER("Dirk Behme ") - BOOT_MEM(0x10000000, 0xfff00000, 0xfef00000) - BOOT_PARAMS(0x10000100) - MAPIO(osk_map_io) - INITIRQ(osk_init_irq) - INIT_MACHINE(osk_init) + /* Maintainer: Dirk Behme */ + .phys_ram = 0x10000000, + .phys_io = 0xfff00000, + .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, + .boot_params = 0x10000100, + .map_io = osk_map_io, + .init_irq = osk_init_irq, + .init_machine = osk_init, .timer = &omap_timer, MACHINE_END diff --git a/arch/arm/mach-omap/board-perseus2.c b/arch/arm/mach-omap/board-perseus2.c index 64515aeb49c..d5342043d48 100644 --- a/arch/arm/mach-omap/board-perseus2.c +++ b/arch/arm/mach-omap/board-perseus2.c @@ -179,11 +179,13 @@ static void __init omap_perseus2_map_io(void) } MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2") - MAINTAINER("Kevin Hilman ") - BOOT_MEM(0x10000000, 0xfff00000, 0xfef00000) - BOOT_PARAMS(0x10000100) - MAPIO(omap_perseus2_map_io) - INITIRQ(omap_perseus2_init_irq) - INIT_MACHINE(omap_perseus2_init) + /* Maintainer: Kevin Hilman */ + .phys_ram = 0x10000000, + .phys_io = 0xfff00000, + .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, + .boot_params = 0x10000100, + .map_io = omap_perseus2_map_io, + .init_irq = omap_perseus2_init_irq, + .init_machine = omap_perseus2_init, .timer = &omap_timer, MACHINE_END diff --git a/arch/arm/mach-omap/board-voiceblue.c b/arch/arm/mach-omap/board-voiceblue.c index f1a5bffac66..6b0c5003d71 100644 --- a/arch/arm/mach-omap/board-voiceblue.c +++ b/arch/arm/mach-omap/board-voiceblue.c @@ -246,11 +246,13 @@ EXPORT_SYMBOL(voiceblue_wdt_disable); EXPORT_SYMBOL(voiceblue_wdt_ping); MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910") - MAINTAINER("Ladislav Michl ") - BOOT_MEM(0x10000000, 0xfff00000, 0xfef00000) - BOOT_PARAMS(0x10000100) - MAPIO(voiceblue_map_io) - INITIRQ(voiceblue_init_irq) - INIT_MACHINE(voiceblue_init) - .timer = &omap_timer, + /* Maintainer: Ladislav Michl */ + .phys_ram = 0x10000000, + .phys_io = 0xfff00000, + .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, + .boot_params = 0x10000100, + .map_io = voiceblue_map_io, + .init_irq = voiceblue_init_irq, + .init_machine = voiceblue_init, + .timer = &omap_timer, MACHINE_END diff --git a/arch/arm/mach-omap/usb.c b/arch/arm/mach-omap/usb.c index 7f37857b1a2..fd483ff9f8f 100644 --- a/arch/arm/mach-omap/usb.c +++ b/arch/arm/mach-omap/usb.c @@ -41,7 +41,6 @@ /* These routines should handle the standard chip-specific modes * for usb0/1/2 ports, covering basic mux and transceiver setup. - * Call omap_usb_init() once, from INIT_MACHINE(). * * Some board-*.c files will need to set up additional mux options, * like for suspend handling, vbus sensing, GPIOs, and the D+ pullup. diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index f691cf77d39..276431bf1ce 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -287,34 +287,40 @@ static void __init corgi_map_io(void) #ifdef CONFIG_MACH_CORGI MACHINE_START(CORGI, "SHARP Corgi") - BOOT_MEM(0xa0000000, 0x40000000, io_p2v(0x40000000)) - FIXUP(fixup_corgi) - MAPIO(corgi_map_io) - INITIRQ(corgi_init_irq) - .init_machine = corgi_init, - .timer = &pxa_timer, + .phys_ram = 0xa0000000, + .phys_io = 0x40000000, + .io_pg_offst = ((io_p2v(0x40000000) >> 18) & 0xfffc,) + .fixup = fixup_corgi, + .map_io = corgi_map_io, + .init_irq = corgi_init_irq, + .init_machine = corgi_init, + .timer = &pxa_timer, MACHINE_END #endif #ifdef CONFIG_MACH_SHEPHERD MACHINE_START(SHEPHERD, "SHARP Shepherd") - BOOT_MEM(0xa0000000, 0x40000000, io_p2v(0x40000000)) - FIXUP(fixup_corgi) - MAPIO(corgi_map_io) - INITIRQ(corgi_init_irq) - .init_machine = corgi_init, - .timer = &pxa_timer, + .phys_ram = 0xa0000000, + .phys_io = 0x40000000, + .io_pg_offst = ((io_p2v(0x40000000) >> 18) & 0xfffc,) + .fixup = fixup_corgi, + .map_io = corgi_map_io, + .init_irq = corgi_init_irq, + .init_machine = corgi_init, + .timer = &pxa_timer, MACHINE_END #endif #ifdef CONFIG_MACH_HUSKY MACHINE_START(HUSKY, "SHARP Husky") - BOOT_MEM(0xa0000000, 0x40000000, io_p2v(0x40000000)) - FIXUP(fixup_corgi) - MAPIO(corgi_map_io) - INITIRQ(corgi_init_irq) - .init_machine = corgi_init, - .timer = &pxa_timer, + .phys_ram = 0xa0000000, + .phys_io = 0x40000000, + .io_pg_offst = ((io_p2v(0x40000000) >> 18) & 0xfffc,) + .fixup = fixup_corgi, + .map_io = corgi_map_io, + .init_irq = corgi_init_irq, + .init_machine = corgi_init, + .timer = &pxa_timer, MACHINE_END #endif diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c index c5a66bf4d3d..f82f5aad560 100644 --- a/arch/arm/mach-pxa/idp.c +++ b/arch/arm/mach-pxa/idp.c @@ -181,10 +181,12 @@ static void __init idp_map_io(void) MACHINE_START(PXA_IDP, "Vibren PXA255 IDP") - MAINTAINER("Vibren Technologies") - BOOT_MEM(0xa0000000, 0x40000000, io_p2v(0x40000000)) - MAPIO(idp_map_io) - INITIRQ(idp_init_irq) + /* Maintainer: Vibren Technologies */ + .phys_ram = 0xa0000000, + .phys_io = 0x40000000, + .io_pg_offst = ((io_p2v(0x40000000) >> 18) & 0xfffc,) + .map_io = idp_map_io, + .init_irq = idp_init_irq, .timer = &pxa_timer, - INIT_MACHINE(idp_init) + .init_machine = idp_init, MACHINE_END diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index f2c9e0d2b24..e30b7c62270 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -268,10 +268,12 @@ static void __init lubbock_map_io(void) } MACHINE_START(LUBBOCK, "Intel DBPXA250 Development Platform (aka Lubbock)") - MAINTAINER("MontaVista Software Inc.") - BOOT_MEM(0xa0000000, 0x40000000, io_p2v(0x40000000)) - MAPIO(lubbock_map_io) - INITIRQ(lubbock_init_irq) + /* Maintainer: MontaVista Software Inc. */ + .phys_ram = 0xa0000000, + .phys_io = 0x40000000, + .io_pg_offst = ((io_p2v(0x40000000) >> 18) & 0xfffc,) + .map_io = lubbock_map_io, + .init_irq = lubbock_init_irq, .timer = &pxa_timer, - INIT_MACHINE(lubbock_init) + .init_machine = lubbock_init, MACHINE_END diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index 9896afca751..5d2f76b6df0 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -345,10 +345,12 @@ static void __init mainstone_map_io(void) } MACHINE_START(MAINSTONE, "Intel HCDDBBVA0 Development Platform (aka Mainstone)") - MAINTAINER("MontaVista Software Inc.") - BOOT_MEM(0xa0000000, 0x40000000, io_p2v(0x40000000)) - MAPIO(mainstone_map_io) - INITIRQ(mainstone_init_irq) + /* Maintainer: MontaVista Software Inc. */ + .phys_ram = 0xa0000000, + .phys_io = 0x40000000, + .io_pg_offst = ((io_p2v(0x40000000) >> 18) & 0xfffc,) + .map_io = mainstone_map_io, + .init_irq = mainstone_init_irq, .timer = &pxa_timer, - INIT_MACHINE(mainstone_init) + .init_machine = mainstone_init, MACHINE_END diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index b6c746ea383..ebae969e883 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -180,10 +180,12 @@ static void __init poodle_map_io(void) } MACHINE_START(POODLE, "SHARP Poodle") - BOOT_MEM(0xa0000000, 0x40000000, io_p2v(0x40000000)) - FIXUP(fixup_poodle) - MAPIO(poodle_map_io) - INITIRQ(pxa_init_irq) - .timer = &pxa_timer, - .init_machine = poodle_init, + .phys_ram = 0xa0000000, + .phys_io = 0x40000000, + .io_pg_offst = ((io_p2v(0x40000000) >> 18) & 0xfffc,) + .fixup = fixup_poodle, + .map_io = poodle_map_io, + .init_irq = pxa_init_irq, + .timer = &pxa_timer, + .init_machine = poodle_init, MACHINE_END diff --git a/arch/arm/mach-rpc/riscpc.c b/arch/arm/mach-rpc/riscpc.c index 43710688143..a10268618f7 100644 --- a/arch/arm/mach-rpc/riscpc.c +++ b/arch/arm/mach-rpc/riscpc.c @@ -163,12 +163,14 @@ arch_initcall(rpc_init); extern struct sys_timer ioc_timer; MACHINE_START(RISCPC, "Acorn-RiscPC") - MAINTAINER("Russell King") - BOOT_MEM(0x10000000, 0x03000000, 0xe0000000) - BOOT_PARAMS(0x10000100) - DISABLE_PARPORT(0) - DISABLE_PARPORT(1) - MAPIO(rpc_map_io) - INITIRQ(rpc_init_irq) + /* Maintainer: Russell King */ + .phys_ram = 0x10000000, + .phys_io = 0x03000000, + .io_pg_offst = ((0xe0000000) >> 18) & 0xfffc, + .boot_params = 0x10000100, + .reserve_lp0 = 1, + .reserve_lp1 = 1, + .map_io = rpc_map_io, + .init_irq = rpc_init_irq, .timer = &ioc_timer, MACHINE_END diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c index 549bcb1f32c..ccb6bcefa46 100644 --- a/arch/arm/mach-s3c2410/mach-bast.c +++ b/arch/arm/mach-s3c2410/mach-bast.c @@ -407,10 +407,11 @@ void __init bast_map_io(void) MACHINE_START(BAST, "Simtec-BAST") - MAINTAINER("Ben Dooks ") - BOOT_MEM(S3C2410_SDRAM_PA, S3C2410_PA_UART, (u32)S3C24XX_VA_UART) - BOOT_PARAMS(S3C2410_SDRAM_PA + 0x100) - + /* Maintainer: Ben Dooks */ + .phys_ram = S3C2410_SDRAM_PA, + .phys_io = S3C2410_PA_UART, + .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, + .boot_params = S3C2410_SDRAM_PA + 0x100, .map_io = bast_map_io, .init_irq = s3c24xx_init_irq, .timer = &s3c24xx_timer, diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c index 2924afc068a..ea4fb1a97a5 100644 --- a/arch/arm/mach-s3c2410/mach-h1940.c +++ b/arch/arm/mach-s3c2410/mach-h1940.c @@ -117,10 +117,12 @@ void __init h1940_init_irq(void) } MACHINE_START(H1940, "IPAQ-H1940") - MAINTAINER("Ben Dooks ") - BOOT_MEM(S3C2410_SDRAM_PA, S3C2410_PA_UART, (u32)S3C24XX_VA_UART) - BOOT_PARAMS(S3C2410_SDRAM_PA + 0x100) - MAPIO(h1940_map_io) - INITIRQ(h1940_init_irq) + /* Maintainer: Ben Dooks */ + .phys_ram = S3C2410_SDRAM_PA, + .phys_io = S3C2410_PA_UART, + .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, + .boot_params = S3C2410_SDRAM_PA + 0x100, + .map_io = h1940_map_io, + .init_irq = h1940_init_irq, .timer = &s3c24xx_timer, MACHINE_END diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c index bd15998c129..79044d9bce3 100644 --- a/arch/arm/mach-s3c2410/mach-n30.c +++ b/arch/arm/mach-s3c2410/mach-n30.c @@ -137,10 +137,11 @@ void __init n30_init(void) } MACHINE_START(N30, "Acer-N30") - MAINTAINER("Christer Weinigel , Ben Dooks ") - BOOT_MEM(S3C2410_SDRAM_PA, S3C2410_PA_UART, (u32)S3C24XX_VA_UART) - BOOT_PARAMS(S3C2410_SDRAM_PA + 0x100) - + /* Maintainer: Christer Weinigel , Ben Dooks */ + .phys_ram = S3C2410_SDRAM_PA, + .phys_io = S3C2410_PA_UART, + .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, + .boot_params = S3C2410_SDRAM_PA + 0x100, .timer = &s3c24xx_timer, .init_machine = n30_init, .init_irq = n30_init_irq, diff --git a/arch/arm/mach-s3c2410/mach-nexcoder.c b/arch/arm/mach-s3c2410/mach-nexcoder.c index 70487bf4b71..d24c242414c 100644 --- a/arch/arm/mach-s3c2410/mach-nexcoder.c +++ b/arch/arm/mach-s3c2410/mach-nexcoder.c @@ -147,9 +147,11 @@ void __init nexcoder_map_io(void) MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440") - MAINTAINER("Guillaume GOURAT ") - BOOT_MEM(S3C2410_SDRAM_PA, S3C2410_PA_UART, (u32)S3C24XX_VA_UART) - BOOT_PARAMS(S3C2410_SDRAM_PA + 0x100) + /* Maintainer: Guillaume GOURAT */ + .phys_ram = S3C2410_SDRAM_PA, + .phys_io = S3C2410_PA_UART, + .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, + .boot_params = S3C2410_SDRAM_PA + 0x100, .map_io = nexcoder_map_io, .init_irq = s3c24xx_init_irq, .timer = &s3c24xx_timer, diff --git a/arch/arm/mach-s3c2410/mach-otom.c b/arch/arm/mach-s3c2410/mach-otom.c index 67d8ce8fb00..d901ed492ff 100644 --- a/arch/arm/mach-s3c2410/mach-otom.c +++ b/arch/arm/mach-s3c2410/mach-otom.c @@ -115,9 +115,11 @@ void __init otom11_map_io(void) MACHINE_START(OTOM, "Nex Vision - Otom 1.1") - MAINTAINER("Guillaume GOURAT ") - BOOT_MEM(S3C2410_SDRAM_PA, S3C2410_PA_UART, (u32)S3C24XX_VA_UART) - BOOT_PARAMS(S3C2410_SDRAM_PA + 0x100) + /* Maintainer: Guillaume GOURAT */ + .phys_ram = S3C2410_SDRAM_PA, + .phys_io = S3C2410_PA_UART, + .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, + .boot_params = S3C2410_SDRAM_PA + 0x100, .map_io = otom11_map_io, .init_irq = s3c24xx_init_irq, .timer = &s3c24xx_timer, diff --git a/arch/arm/mach-s3c2410/mach-rx3715.c b/arch/arm/mach-s3c2410/mach-rx3715.c index f8d3a9784e7..a73d61c1de4 100644 --- a/arch/arm/mach-s3c2410/mach-rx3715.c +++ b/arch/arm/mach-s3c2410/mach-rx3715.c @@ -131,11 +131,13 @@ static void __init rx3715_init_machine(void) #endif MACHINE_START(RX3715, "IPAQ-RX3715") - MAINTAINER("Ben Dooks ") - BOOT_MEM(S3C2410_SDRAM_PA, S3C2410_PA_UART, (u32)S3C24XX_VA_UART) - BOOT_PARAMS(S3C2410_SDRAM_PA + 0x100) - MAPIO(rx3715_map_io) - INITIRQ(rx3715_init_irq) - INIT_MACHINE(rx3715_init_machine) + /* Maintainer: Ben Dooks */ + .phys_ram = S3C2410_SDRAM_PA, + .phys_io = S3C2410_PA_UART, + .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, + .boot_params = S3C2410_SDRAM_PA + 0x100, + .map_io = rx3715_map_io, + .init_irq = rx3715_init_irq, + .init_machine = rx3715_init_machine, .timer = &s3c24xx_timer, MACHINE_END diff --git a/arch/arm/mach-s3c2410/mach-smdk2410.c b/arch/arm/mach-s3c2410/mach-smdk2410.c index c1a4a1420ea..67e903a700d 100644 --- a/arch/arm/mach-s3c2410/mach-smdk2410.c +++ b/arch/arm/mach-s3c2410/mach-smdk2410.c @@ -112,11 +112,13 @@ void __init smdk2410_init_irq(void) MACHINE_START(SMDK2410, "SMDK2410") /* @TODO: request a new identifier and switch * to SMDK2410 */ - MAINTAINER("Jonas Dietsche") - BOOT_MEM(S3C2410_SDRAM_PA, S3C2410_PA_UART, (u32)S3C24XX_VA_UART) - BOOT_PARAMS(S3C2410_SDRAM_PA + 0x100) - MAPIO(smdk2410_map_io) - INITIRQ(smdk2410_init_irq) + /* Maintainer: Jonas Dietsche */ + .phys_ram = S3C2410_SDRAM_PA, + .phys_io = S3C2410_PA_UART, + .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, + .boot_params = S3C2410_SDRAM_PA + 0x100, + .map_io = smdk2410_map_io, + .init_irq = smdk2410_init_irq, .timer = &s3c24xx_timer, MACHINE_END diff --git a/arch/arm/mach-s3c2410/mach-smdk2440.c b/arch/arm/mach-s3c2410/mach-smdk2440.c index 7857176d9bc..357522106f6 100644 --- a/arch/arm/mach-s3c2410/mach-smdk2440.c +++ b/arch/arm/mach-s3c2410/mach-smdk2440.c @@ -124,9 +124,11 @@ void __init smdk2440_machine_init(void) } MACHINE_START(S3C2440, "SMDK2440") - MAINTAINER("Ben Dooks ") - BOOT_MEM(S3C2410_SDRAM_PA, S3C2410_PA_UART, (u32)S3C24XX_VA_UART) - BOOT_PARAMS(S3C2410_SDRAM_PA + 0x100) + /* Maintainer: Ben Dooks */ + .phys_ram = S3C2410_SDRAM_PA, + .phys_io = S3C2410_PA_UART, + .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, + .boot_params = S3C2410_SDRAM_PA + 0x100, .init_irq = s3c24xx_init_irq, .map_io = smdk2440_map_io, diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c index 1db2855e3e5..924e8464c21 100644 --- a/arch/arm/mach-s3c2410/mach-vr1000.c +++ b/arch/arm/mach-s3c2410/mach-vr1000.c @@ -373,9 +373,11 @@ void __init vr1000_map_io(void) MACHINE_START(VR1000, "Thorcom-VR1000") - MAINTAINER("Ben Dooks ") - BOOT_MEM(S3C2410_SDRAM_PA, S3C2410_PA_UART, (u32)S3C24XX_VA_UART) - BOOT_PARAMS(S3C2410_SDRAM_PA + 0x100) + /* Maintainer: Ben Dooks */ + .phys_ram = S3C2410_SDRAM_PA, + .phys_io = S3C2410_PA_UART, + .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, + .boot_params = S3C2410_SDRAM_PA + 0x100, .map_io = vr1000_map_io, .init_irq = s3c24xx_init_irq, .timer = &s3c24xx_timer, diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c index bedf88fafe0..4d4d303ee3a 100644 --- a/arch/arm/mach-sa1100/assabet.c +++ b/arch/arm/mach-sa1100/assabet.c @@ -431,11 +431,13 @@ static void __init assabet_map_io(void) MACHINE_START(ASSABET, "Intel-Assabet") - BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000) - BOOT_PARAMS(0xc0000100) - FIXUP(fixup_assabet) - MAPIO(assabet_map_io) - INITIRQ(sa1100_init_irq) + .phys_ram = 0xc0000000, + .phys_io = 0x80000000, + .io_pg_offst = ((0xf8000000) >> 18) & 0xfffc, + .boot_params = 0xc0000100, + .fixup = fixup_assabet, + .map_io = assabet_map_io, + .init_irq = sa1100_init_irq, .timer = &sa1100_timer, .init_machine = assabet_init, MACHINE_END diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c index 6a60b497ab4..b6169cb0919 100644 --- a/arch/arm/mach-sa1100/badge4.c +++ b/arch/arm/mach-sa1100/badge4.c @@ -285,9 +285,11 @@ static void __init badge4_map_io(void) } MACHINE_START(BADGE4, "Hewlett-Packard Laboratories BadgePAD 4") - BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000) - BOOT_PARAMS(0xc0000100) - MAPIO(badge4_map_io) - INITIRQ(sa1100_init_irq) + .phys_ram = 0xc0000000, + .phys_io = 0x80000000, + .io_pg_offst = ((0xf8000000) >> 18) & 0xfffc, + .boot_params = 0xc0000100, + .map_io = badge4_map_io, + .init_irq = sa1100_init_irq, .timer = &sa1100_timer, MACHINE_END diff --git a/arch/arm/mach-sa1100/cerf.c b/arch/arm/mach-sa1100/cerf.c index f8edde5e7cb..0aa918e24c3 100644 --- a/arch/arm/mach-sa1100/cerf.c +++ b/arch/arm/mach-sa1100/cerf.c @@ -123,10 +123,12 @@ static void __init cerf_init(void) } MACHINE_START(CERF, "Intrinsyc CerfBoard/CerfCube") - MAINTAINER("support@intrinsyc.com") - BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000) - MAPIO(cerf_map_io) - INITIRQ(cerf_init_irq) + /* Maintainer: support@intrinsyc.com */ + .phys_ram = 0xc0000000, + .phys_io = 0x80000000, + .io_pg_offst = ((0xf8000000) >> 18) & 0xfffc, + .map_io = cerf_map_io, + .init_irq = cerf_init_irq, .timer = &sa1100_timer, .init_machine = cerf_init, MACHINE_END diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c index 99287890d39..8cb69113a57 100644 --- a/arch/arm/mach-sa1100/collie.c +++ b/arch/arm/mach-sa1100/collie.c @@ -184,9 +184,11 @@ static void __init collie_map_io(void) } MACHINE_START(COLLIE, "Sharp-Collie") - BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000) - MAPIO(collie_map_io) - INITIRQ(sa1100_init_irq) + .phys_ram = 0xc0000000, + .phys_io = 0x80000000, + .io_pg_offst = ((0xf8000000) >> 18) & 0xfffc, + .map_io = collie_map_io, + .init_irq = sa1100_init_irq, .timer = &sa1100_timer, .init_machine = collie_init, MACHINE_END diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c index 65dbe991426..e7aa2681ca6 100644 --- a/arch/arm/mach-sa1100/h3600.c +++ b/arch/arm/mach-sa1100/h3600.c @@ -380,10 +380,12 @@ static void __init h3100_map_io(void) } MACHINE_START(H3100, "Compaq iPAQ H3100") - BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000) - BOOT_PARAMS(0xc0000100) - MAPIO(h3100_map_io) - INITIRQ(sa1100_init_irq) + .phys_ram = 0xc0000000, + .phys_io = 0x80000000, + .io_pg_offst = ((0xf8000000) >> 18) & 0xfffc, + .boot_params = 0xc0000100, + .map_io = h3100_map_io, + .init_irq = sa1100_init_irq, .timer = &sa1100_timer, .init_machine = h3xxx_mach_init, MACHINE_END @@ -496,10 +498,12 @@ static void __init h3600_map_io(void) } MACHINE_START(H3600, "Compaq iPAQ H3600") - BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000) - BOOT_PARAMS(0xc0000100) - MAPIO(h3600_map_io) - INITIRQ(sa1100_init_irq) + .phys_ram = 0xc0000000, + .phys_io = 0x80000000, + .io_pg_offst = ((0xf8000000) >> 18) & 0xfffc, + .boot_params = 0xc0000100, + .map_io = h3600_map_io, + .init_irq = sa1100_init_irq, .timer = &sa1100_timer, .init_machine = h3xxx_mach_init, MACHINE_END @@ -881,10 +885,12 @@ static void __init h3800_map_io(void) } MACHINE_START(H3800, "Compaq iPAQ H3800") - BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000) - BOOT_PARAMS(0xc0000100) - MAPIO(h3800_map_io) - INITIRQ(h3800_init_irq) + .phys_ram = 0xc0000000, + .phys_io = 0x80000000, + .io_pg_offst = ((0xf8000000) >> 18) & 0xfffc, + .boot_params = 0xc0000100, + .map_io = h3800_map_io, + .init_irq = h3800_init_irq, .timer = &sa1100_timer, .init_machine = h3xxx_mach_init, MACHINE_END diff --git a/arch/arm/mach-sa1100/hackkit.c b/arch/arm/mach-sa1100/hackkit.c index 57084177971..502d65cfe65 100644 --- a/arch/arm/mach-sa1100/hackkit.c +++ b/arch/arm/mach-sa1100/hackkit.c @@ -191,10 +191,12 @@ static void __init hackkit_init(void) */ MACHINE_START(HACKKIT, "HackKit Cpu Board") - BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000) - BOOT_PARAMS(0xc0000100) - MAPIO(hackkit_map_io) - INITIRQ(sa1100_init_irq) + .phys_ram = 0xc0000000, + .phys_io = 0x80000000, + .io_pg_offst = ((0xf8000000) >> 18) & 0xfffc, + .boot_params = 0xc0000100, + .map_io = hackkit_map_io, + .init_irq = sa1100_init_irq, .timer = &sa1100_timer, .init_machine = hackkit_init, MACHINE_END diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c index 6be78291a87..eee3cbc5ec4 100644 --- a/arch/arm/mach-sa1100/jornada720.c +++ b/arch/arm/mach-sa1100/jornada720.c @@ -97,9 +97,11 @@ static void __init jornada720_map_io(void) } MACHINE_START(JORNADA720, "HP Jornada 720") - BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000) - BOOT_PARAMS(0xc0000100) - MAPIO(jornada720_map_io) - INITIRQ(sa1100_init_irq) + .phys_ram = 0xc0000000, + .phys_io = 0x80000000, + .io_pg_offst = ((0xf8000000) >> 18) & 0xfffc, + .boot_params = 0xc0000100, + .map_io = jornada720_map_io, + .init_irq = sa1100_init_irq, .timer = &sa1100_timer, MACHINE_END diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c index 51c08ccfb8d..870b488aeda 100644 --- a/arch/arm/mach-sa1100/lart.c +++ b/arch/arm/mach-sa1100/lart.c @@ -41,9 +41,11 @@ static void __init lart_map_io(void) } MACHINE_START(LART, "LART") - BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000) - BOOT_PARAMS(0xc0000100) - MAPIO(lart_map_io) - INITIRQ(sa1100_init_irq) + .phys_ram = 0xc0000000, + .phys_io = 0x80000000, + .io_pg_offst = ((0xf8000000) >> 18) & 0xfffc, + .boot_params = 0xc0000100, + .map_io = lart_map_io, + .init_irq = sa1100_init_irq, .timer = &sa1100_timer, MACHINE_END diff --git a/arch/arm/mach-sa1100/pleb.c b/arch/arm/mach-sa1100/pleb.c index 5606bd71b02..e17b58fb9c9 100644 --- a/arch/arm/mach-sa1100/pleb.c +++ b/arch/arm/mach-sa1100/pleb.c @@ -146,9 +146,11 @@ static void __init pleb_map_io(void) } MACHINE_START(PLEB, "PLEB") - BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000) - MAPIO(pleb_map_io) - INITIRQ(sa1100_init_irq) + .phys_ram = 0xc0000000, + .phys_io = 0x80000000, + .io_pg_offst = ((0xf8000000) >> 18) & 0xfffc, + .map_io = pleb_map_io, + .init_irq = sa1100_init_irq, .timer = &sa1100_timer, .init_machine = pleb_init, MACHINE_END diff --git a/arch/arm/mach-sa1100/shannon.c b/arch/arm/mach-sa1100/shannon.c index edddd559be0..43a00359fcd 100644 --- a/arch/arm/mach-sa1100/shannon.c +++ b/arch/arm/mach-sa1100/shannon.c @@ -76,10 +76,12 @@ static void __init shannon_map_io(void) } MACHINE_START(SHANNON, "Shannon (AKA: Tuxscreen)") - BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000) - BOOT_PARAMS(0xc0000100) - MAPIO(shannon_map_io) - INITIRQ(sa1100_init_irq) + .phys_ram = 0xc0000000, + .phys_io = 0x80000000, + .io_pg_offst = ((0xf8000000) >> 18) & 0xfffc, + .boot_params = 0xc0000100, + .map_io = shannon_map_io, + .init_irq = sa1100_init_irq, .timer = &sa1100_timer, .init_machine = shannon_init, MACHINE_END diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c index 8d113d62986..77978586b12 100644 --- a/arch/arm/mach-sa1100/simpad.c +++ b/arch/arm/mach-sa1100/simpad.c @@ -215,10 +215,12 @@ arch_initcall(simpad_init); MACHINE_START(SIMPAD, "Simpad") - MAINTAINER("Holger Freyther") - BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000) - BOOT_PARAMS(0xc0000100) - MAPIO(simpad_map_io) - INITIRQ(sa1100_init_irq) + /* Maintainer: Holger Freyther */ + .phys_ram = 0xc0000000, + .phys_io = 0x80000000, + .io_pg_offst = ((0xf8000000) >> 18) & 0xfffc, + .boot_params = 0xc0000100, + .map_io = simpad_map_io, + .init_irq = sa1100_init_irq, .timer = &sa1100_timer, MACHINE_END diff --git a/arch/arm/mach-shark/core.c b/arch/arm/mach-shark/core.c index aa0e2f6e02f..726445895b5 100644 --- a/arch/arm/mach-shark/core.c +++ b/arch/arm/mach-shark/core.c @@ -105,10 +105,12 @@ static struct sys_timer shark_timer = { }; MACHINE_START(SHARK, "Shark") - MAINTAINER("Alexander Schulz") - BOOT_MEM(0x08000000, 0x40000000, 0xe0000000) - BOOT_PARAMS(0x08003000) - MAPIO(shark_map_io) - INITIRQ(shark_init_irq) + /* Maintainer: Alexander Schulz */ + .phys_ram = 0x08000000, + .phys_io = 0x40000000, + .io_pg_offst = ((0xe0000000) >> 18) & 0xfffc, + .boot_params = 0x08003000, + .map_io = shark_map_io, + .init_irq = shark_init_irq, .timer = &shark_timer, MACHINE_END diff --git a/arch/arm/mach-versatile/versatile_ab.c b/arch/arm/mach-versatile/versatile_ab.c index d332084586c..8b0b3bef24a 100644 --- a/arch/arm/mach-versatile/versatile_ab.c +++ b/arch/arm/mach-versatile/versatile_ab.c @@ -35,11 +35,13 @@ #include "core.h" MACHINE_START(VERSATILE_AB, "ARM-Versatile AB") - MAINTAINER("ARM Ltd/Deep Blue Solutions Ltd") - BOOT_MEM(0x00000000, 0x101f1000, 0xf11f1000) - BOOT_PARAMS(0x00000100) - MAPIO(versatile_map_io) - INITIRQ(versatile_init_irq) + /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ + .phys_ram = 0x00000000, + .phys_io = 0x101f1000, + .io_pg_offst = ((0xf11f1000) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .map_io = versatile_map_io, + .init_irq = versatile_init_irq, .timer = &versatile_timer, - INIT_MACHINE(versatile_init) + .init_machine = versatile_init, MACHINE_END diff --git a/arch/arm/mach-versatile/versatile_pb.c b/arch/arm/mach-versatile/versatile_pb.c index 2702099a68f..7c3078c3891 100644 --- a/arch/arm/mach-versatile/versatile_pb.c +++ b/arch/arm/mach-versatile/versatile_pb.c @@ -99,11 +99,13 @@ static int __init versatile_pb_init(void) arch_initcall(versatile_pb_init); MACHINE_START(VERSATILE_PB, "ARM-Versatile PB") - MAINTAINER("ARM Ltd/Deep Blue Solutions Ltd") - BOOT_MEM(0x00000000, 0x101f1000, 0xf11f1000) - BOOT_PARAMS(0x00000100) - MAPIO(versatile_map_io) - INITIRQ(versatile_init_irq) + /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ + .phys_ram = 0x00000000, + .phys_io = 0x101f1000, + .io_pg_offst = ((0xf11f1000) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .map_io = versatile_map_io, + .init_irq = versatile_init_irq, .timer = &versatile_timer, - INIT_MACHINE(versatile_init) + .init_machine = versatile_init, MACHINE_END -- cgit v1.2.3 From 0d670b413f042eccdffc45bafb9840244752707f Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Sun, 3 Jul 2005 17:53:25 +0100 Subject: [PATCH] ARM: 2784/1: Fix the block cache flush operation range Patch from Catalin Marinas The range for the ARMv6 block cache operations is inclusive but the kernel doesn't re-calculate the end address, causing a page fault when used (this only happens with support for cache aliasing, otherwise the blk_flush_kern_dcache_page() is not called). This patch subtracts L1_CACHE_BYTES from the end address. Signed-off-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/mm/blockops.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mm/blockops.c b/arch/arm/mm/blockops.c index 806c6eeb1b0..4f5ee2d0899 100644 --- a/arch/arm/mm/blockops.c +++ b/arch/arm/mm/blockops.c @@ -25,13 +25,14 @@ blk_flush_kern_dcache_page(void *kaddr) { asm( "add r1, r0, %0 \n\ + sub r1, r1, %1 \n\ 1: .word 0xec401f0e @ mcrr p15, 0, r0, r1, c14, 0 @ blocking \n\ mov r0, #0 \n\ mcr p15, 0, r0, c7, c5, 0 \n\ mcr p15, 0, r0, c7, c10, 4 \n\ mov pc, lr" : - : "I" (PAGE_SIZE)); + : "I" (PAGE_SIZE), "I" (L1_CACHE_BYTES)); } /* -- cgit v1.2.3 From f9bd6ea446946b97208f9e1528eb5f9ef8f931cb Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 4 Jul 2005 10:43:36 +0100 Subject: [PATCH] ARM: Change 'param_offset' to 'boot_params' Signed-off-by: Russell King --- arch/arm/kernel/setup.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 35b7273cfdb..c9b69771f92 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -737,8 +737,8 @@ void __init setup_arch(char **cmdline_p) if (mdesc->soft_reboot) reboot_setup("s"); - if (mdesc->param_offset) - tags = phys_to_virt(mdesc->param_offset); + if (mdesc->boot_params) + tags = phys_to_virt(mdesc->boot_params); /* * If we have the old style parameters, convert them to -- cgit v1.2.3 From 68070bdeeca7b7af6a42c0b3e5b1247e83c22ff9 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 4 Jul 2005 10:44:34 +0100 Subject: [PATCH] ARM: Fix non-standard PXA io_pg_offst initialisers These didn't match my sed expression correctly, fix them up manually. Signed-off-by: Russell King --- arch/arm/mach-pxa/corgi.c | 6 +++--- arch/arm/mach-pxa/idp.c | 2 +- arch/arm/mach-pxa/lubbock.c | 2 +- arch/arm/mach-pxa/mainstone.c | 2 +- arch/arm/mach-pxa/poodle.c | 2 +- 5 files changed, 7 insertions(+), 7 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index 276431bf1ce..86b862f56e7 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -289,7 +289,7 @@ static void __init corgi_map_io(void) MACHINE_START(CORGI, "SHARP Corgi") .phys_ram = 0xa0000000, .phys_io = 0x40000000, - .io_pg_offst = ((io_p2v(0x40000000) >> 18) & 0xfffc,) + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .fixup = fixup_corgi, .map_io = corgi_map_io, .init_irq = corgi_init_irq, @@ -302,7 +302,7 @@ MACHINE_END MACHINE_START(SHEPHERD, "SHARP Shepherd") .phys_ram = 0xa0000000, .phys_io = 0x40000000, - .io_pg_offst = ((io_p2v(0x40000000) >> 18) & 0xfffc,) + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .fixup = fixup_corgi, .map_io = corgi_map_io, .init_irq = corgi_init_irq, @@ -315,7 +315,7 @@ MACHINE_END MACHINE_START(HUSKY, "SHARP Husky") .phys_ram = 0xa0000000, .phys_io = 0x40000000, - .io_pg_offst = ((io_p2v(0x40000000) >> 18) & 0xfffc,) + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .fixup = fixup_corgi, .map_io = corgi_map_io, .init_irq = corgi_init_irq, diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c index f82f5aad560..386e107b53c 100644 --- a/arch/arm/mach-pxa/idp.c +++ b/arch/arm/mach-pxa/idp.c @@ -184,7 +184,7 @@ MACHINE_START(PXA_IDP, "Vibren PXA255 IDP") /* Maintainer: Vibren Technologies */ .phys_ram = 0xa0000000, .phys_io = 0x40000000, - .io_pg_offst = ((io_p2v(0x40000000) >> 18) & 0xfffc,) + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .map_io = idp_map_io, .init_irq = idp_init_irq, .timer = &pxa_timer, diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index e30b7c62270..6309853b59b 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -271,7 +271,7 @@ MACHINE_START(LUBBOCK, "Intel DBPXA250 Development Platform (aka Lubbock)") /* Maintainer: MontaVista Software Inc. */ .phys_ram = 0xa0000000, .phys_io = 0x40000000, - .io_pg_offst = ((io_p2v(0x40000000) >> 18) & 0xfffc,) + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .map_io = lubbock_map_io, .init_irq = lubbock_init_irq, .timer = &pxa_timer, diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index 5d2f76b6df0..827b7b5a5be 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -348,7 +348,7 @@ MACHINE_START(MAINSTONE, "Intel HCDDBBVA0 Development Platform (aka Mainstone)") /* Maintainer: MontaVista Software Inc. */ .phys_ram = 0xa0000000, .phys_io = 0x40000000, - .io_pg_offst = ((io_p2v(0x40000000) >> 18) & 0xfffc,) + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .map_io = mainstone_map_io, .init_irq = mainstone_init_irq, .timer = &pxa_timer, diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index ebae969e883..0e4f6fab100 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -182,7 +182,7 @@ static void __init poodle_map_io(void) MACHINE_START(POODLE, "SHARP Poodle") .phys_ram = 0xa0000000, .phys_io = 0x40000000, - .io_pg_offst = ((io_p2v(0x40000000) >> 18) & 0xfffc,) + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .fixup = fixup_poodle, .map_io = poodle_map_io, .init_irq = pxa_init_irq, -- cgit v1.2.3