From 8056c6cb2bb1632aa9221dce0e43a61db37b420f Mon Sep 17 00:00:00 2001 From: David Brownell Date: Sat, 13 Oct 2007 23:56:30 +0200 Subject: i2c/tps65010: New-style driver updates, part 2 Switch the tps65010 driver into a "new-style" I2C driver, and convert all of its in-tree users (board support for OSK, H2, H3) accordingly. That accounts for most of the board-specific code in this driver; the rest of that code is now moved into board-specific initcalls. Also remove some of the many now-superfluous #includes. Signed-off-by: David Brownell Signed-off-by: Jean Delvare --- arch/arm/mach-omap1/board-h2.c | 45 +++++++++++++++++++++++++++-- arch/arm/mach-omap1/board-h3.c | 39 ++++++++++++++++++++++++- arch/arm/mach-omap1/board-osk.c | 64 ++++++++++++++++++++++++++++++++++++++++- 3 files changed, 143 insertions(+), 5 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index 48c8c9195dc..2f8f6ecf111 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -20,22 +20,23 @@ */ #include -#include #include #include +#include #include #include #include #include -#include #include +#include + #include #include #include #include -#include +#include #include #include #include @@ -277,6 +278,20 @@ static struct platform_device *h2_devices[] __initdata = { &h2_mcbsp1_device, }; +static struct i2c_board_info __initdata h2_i2c_board_info[] = { + { + I2C_BOARD_INFO("tps65010", 0x48), + .type = "tps65010", + .irq = OMAP_GPIO_IRQ(58), + }, + /* TODO when driver support is ready: + * - isp1301 OTG transceiver + * - optional ov9640 camera sensor at 0x30 + * - pcf9754 for aGPS control + * - ... etc + */ +}; + static void __init h2_init_smc91x(void) { if ((omap_request_gpio(0)) < 0) { @@ -367,6 +382,14 @@ static void __init h2_init(void) omap_board_config = h2_config; omap_board_config_size = ARRAY_SIZE(h2_config); omap_serial_init(); + + /* irq for tps65010 chip */ + omap_cfg_reg(W4_GPIO58); + if (gpio_request(58, "tps65010") == 0) + gpio_direction_input(58); + + i2c_register_board_info(1, h2_i2c_board_info, + ARRAY_SIZE(h2_i2c_board_info)); } static void __init h2_map_io(void) @@ -374,6 +397,22 @@ static void __init h2_map_io(void) omap1_map_common_io(); } +#ifdef CONFIG_TPS65010 +static int __init h2_tps_init(void) +{ + if (!machine_is_omap_h2()) + return 0; + + /* gpio3 for SD, gpio4 for VDD_DSP */ + /* FIXME send power to DSP iff it's configured */ + + /* Enable LOW_PWR */ + tps65010_set_low_pwr(ON); + return 0; +} +fs_initcall(h2_tps_init); +#endif + MACHINE_START(OMAP_H2, "TI-H2") /* Maintainer: Imre Deak */ .phys_io = 0xfff00000, diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index 79d4ef4c54d..add2f703204 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include #include @@ -29,12 +30,14 @@ #include #include #include +#include + #include #include #include #include -#include +#include #include #include #include @@ -413,6 +416,19 @@ static struct omap_board_config_kernel h3_config[] = { { OMAP_TAG_LCD, &h3_lcd_config }, }; +static struct i2c_board_info __initdata h3_i2c_board_info[] = { + { + I2C_BOARD_INFO("tps65010", 0x48), + .type = "tps65013", + /* .irq = OMAP_GPIO_IRQ(??), */ + }, + /* TODO when driver support is ready: + * - isp1301 OTG transceiver + * - optional ov9640 camera sensor at 0x30 + * - ... + */ +}; + #define H3_NAND_RB_GPIO_PIN 10 static int nand_dev_ready(struct nand_platform_data *data) @@ -446,6 +462,10 @@ static void __init h3_init(void) omap_board_config = h3_config; omap_board_config_size = ARRAY_SIZE(h3_config); omap_serial_init(); + + /* FIXME setup irq for tps65013 chip */ + i2c_register_board_info(1, h3_i2c_board_info, + ARRAY_SIZE(h3_i2c_board_info)); } static void __init h3_init_smc91x(void) @@ -470,6 +490,23 @@ static void __init h3_map_io(void) omap1_map_common_io(); } +#ifdef CONFIG_TPS65010 +static int __init h3_tps_init(void) +{ + if (!machine_is_omap_h3()) + return 0; + + /* gpio4 for SD, gpio3 for VDD_DSP */ + /* FIXME send power to DSP iff it's configured */ + + /* Enable LOW_PWR */ + tps65013_set_low_pwr(ON); + + return 0; +} +fs_initcall(h3_tps_init); +#endif + MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board") /* Maintainer: Texas Instruments, Inc. */ .phys_io = 0xfff00000, diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index e7130293a03..a61bf455ee0 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -31,18 +31,21 @@ #include #include #include +#include #include #include #include +#include + #include #include #include #include -#include #include +#include #include #include #include @@ -179,6 +182,19 @@ static struct platform_device *osk5912_devices[] __initdata = { &osk5912_mcbsp1_device, }; +static struct i2c_board_info __initdata osk_i2c_board_info[] = { + { + I2C_BOARD_INFO("tps65010", 0x48), + .type = "tps65010", + .irq = OMAP_GPIO_IRQ(OMAP_MPUIO(1)), + }, + /* TODO when driver support is ready: + * - aic23 audio chip at 0x1a + * - on Mistral, 24c04 eeprom at 0x50 + * - optionally on Mistral, ov9640 camera sensor at 0x30 + */ +}; + static void __init osk_init_smc91x(void) { if ((omap_request_gpio(0)) < 0) { @@ -397,6 +413,14 @@ static void __init osk_init(void) omap_board_config_size = ARRAY_SIZE(osk_config); USB_TRANSCEIVER_CTRL_REG |= (3 << 1); + /* irq for tps65010 chip */ + /* bootloader effectively does: omap_cfg_reg(U19_1610_MPUIO1); */ + if (gpio_request(OMAP_MPUIO(1), "tps65010") == 0) + gpio_direction_input(OMAP_MPUIO(1)); + + i2c_register_board_info(1, osk_i2c_board_info, + ARRAY_SIZE(osk_i2c_board_info)); + omap_serial_init(); osk_mistral_init(); } @@ -406,6 +430,44 @@ static void __init osk_map_io(void) omap1_map_common_io(); } +#ifdef CONFIG_TPS65010 +static int __init osk_tps_init(void) +{ + if (!machine_is_omap_osk()) + return 0; + + /* Let LED1 (D9) blink */ + tps65010_set_led(LED1, BLINK); + + /* Disable LED 2 (D2) */ + tps65010_set_led(LED2, OFF); + + /* Set GPIO 1 HIGH to disable VBUS power supply; + * OHCI driver powers it up/down as needed. + */ + tps65010_set_gpio_out_value(GPIO1, HIGH); + + /* Set GPIO 2 low to turn on LED D3 */ + tps65010_set_gpio_out_value(GPIO2, HIGH); + + /* Set GPIO 3 low to take ethernet out of reset */ + tps65010_set_gpio_out_value(GPIO3, LOW); + + /* gpio4 for VDD_DSP */ + /* FIXME send power to DSP iff it's configured */ + + /* Enable LOW_PWR */ + tps65010_set_low_pwr(ON); + + /* Switch VLDO2 to 3.0V for AIC23 */ + tps65010_config_vregs1(TPS_LDO2_ENABLE | TPS_VLDO2_3_0V + | TPS_LDO1_ENABLE); + + return 0; +} +fs_initcall(osk_tps_init); +#endif + MACHINE_START(OMAP_OSK, "TI-OSK") /* Maintainer: Dirk Behme */ .phys_io = 0xfff00000, -- cgit v1.2.3