From a3f66351b3cc89011e8a34068c245b413ce696d6 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 12 Dec 2008 00:24:05 +0000 Subject: [ARM] S3C: Nove from plat-s3c24xx to plat-s3fc Move the header to plat-s3c as preparation for moving parts of the s3c24xx pm support which are common into the plat-s3c support. Signed-off-by: Ben Dooks --- arch/arm/plat-s3c/include/plat/pm.h | 73 +++++++++++++++++++++++++++++++++ arch/arm/plat-s3c24xx/include/plat/pm.h | 73 --------------------------------- 2 files changed, 73 insertions(+), 73 deletions(-) create mode 100644 arch/arm/plat-s3c/include/plat/pm.h delete mode 100644 arch/arm/plat-s3c24xx/include/plat/pm.h (limited to 'arch/arm') diff --git a/arch/arm/plat-s3c/include/plat/pm.h b/arch/arm/plat-s3c/include/plat/pm.h new file mode 100644 index 00000000000..cc623667e48 --- /dev/null +++ b/arch/arm/plat-s3c/include/plat/pm.h @@ -0,0 +1,73 @@ +/* linux/include/asm-arm/plat-s3c24xx/pm.h + * + * Copyright (c) 2004 Simtec Electronics + * Written by Ben Dooks, + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* s3c2410_pm_init + * + * called from board at initialisation time to setup the power + * management +*/ + +#ifdef CONFIG_PM + +extern __init int s3c2410_pm_init(void); + +#else + +static inline int s3c2410_pm_init(void) +{ + return 0; +} +#endif + +/* configuration for the IRQ mask over sleep */ +extern unsigned long s3c_irqwake_intmask; +extern unsigned long s3c_irqwake_eintmask; + +/* IRQ masks for IRQs allowed to go to sleep (see irq.c) */ +extern unsigned long s3c_irqwake_intallow; +extern unsigned long s3c_irqwake_eintallow; + +/* per-cpu sleep functions */ + +extern void (*pm_cpu_prep)(void); +extern void (*pm_cpu_sleep)(void); + +/* Flags for PM Control */ + +extern unsigned long s3c_pm_flags; + +/* from sleep.S */ + +extern int s3c2410_cpu_save(unsigned long *saveblk); +extern void s3c2410_cpu_suspend(void); +extern void s3c2410_cpu_resume(void); + +extern unsigned long s3c2410_sleep_save_phys; + +/* sleep save info */ + +struct sleep_save { + void __iomem *reg; + unsigned long val; +}; + +#define SAVE_ITEM(x) \ + { .reg = (x) } + +extern void s3c2410_pm_do_save(struct sleep_save *ptr, int count); +extern void s3c2410_pm_do_restore(struct sleep_save *ptr, int count); + +#ifdef CONFIG_PM +extern int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state); +extern int s3c24xx_irq_resume(struct sys_device *dev); +#else +#define s3c24xx_irq_suspend NULL +#define s3c24xx_irq_resume NULL +#endif diff --git a/arch/arm/plat-s3c24xx/include/plat/pm.h b/arch/arm/plat-s3c24xx/include/plat/pm.h deleted file mode 100644 index cc623667e48..00000000000 --- a/arch/arm/plat-s3c24xx/include/plat/pm.h +++ /dev/null @@ -1,73 +0,0 @@ -/* linux/include/asm-arm/plat-s3c24xx/pm.h - * - * Copyright (c) 2004 Simtec Electronics - * Written by Ben Dooks, - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* s3c2410_pm_init - * - * called from board at initialisation time to setup the power - * management -*/ - -#ifdef CONFIG_PM - -extern __init int s3c2410_pm_init(void); - -#else - -static inline int s3c2410_pm_init(void) -{ - return 0; -} -#endif - -/* configuration for the IRQ mask over sleep */ -extern unsigned long s3c_irqwake_intmask; -extern unsigned long s3c_irqwake_eintmask; - -/* IRQ masks for IRQs allowed to go to sleep (see irq.c) */ -extern unsigned long s3c_irqwake_intallow; -extern unsigned long s3c_irqwake_eintallow; - -/* per-cpu sleep functions */ - -extern void (*pm_cpu_prep)(void); -extern void (*pm_cpu_sleep)(void); - -/* Flags for PM Control */ - -extern unsigned long s3c_pm_flags; - -/* from sleep.S */ - -extern int s3c2410_cpu_save(unsigned long *saveblk); -extern void s3c2410_cpu_suspend(void); -extern void s3c2410_cpu_resume(void); - -extern unsigned long s3c2410_sleep_save_phys; - -/* sleep save info */ - -struct sleep_save { - void __iomem *reg; - unsigned long val; -}; - -#define SAVE_ITEM(x) \ - { .reg = (x) } - -extern void s3c2410_pm_do_save(struct sleep_save *ptr, int count); -extern void s3c2410_pm_do_restore(struct sleep_save *ptr, int count); - -#ifdef CONFIG_PM -extern int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state); -extern int s3c24xx_irq_resume(struct sys_device *dev); -#else -#define s3c24xx_irq_suspend NULL -#define s3c24xx_irq_resume NULL -#endif -- cgit v1.2.3 From 6419711a164ba1304fa8fbb75ae9485455e04dcd Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 12 Dec 2008 00:24:06 +0000 Subject: [ARM] S3C: Move PM support functions to common location Start moving the PM code by moving all the common support functions to a common location in arch/arm/plat-s3c. With the move we rename the functions from s3cxxx_ to s3c_ to fit the new location. Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2410/pm.c | 11 +--- arch/arm/mach-s3c2412/pm.c | 4 +- arch/arm/plat-s3c/Makefile | 4 ++ arch/arm/plat-s3c/include/plat/pm.h | 36 +++++++++++- arch/arm/plat-s3c/pm.c | 97 +++++++++++++++++++++++++++++++ arch/arm/plat-s3c24xx/irq.c | 4 +- arch/arm/plat-s3c24xx/pm.c | 113 ++++++++---------------------------- arch/arm/plat-s3c24xx/s3c244x.c | 4 +- arch/arm/plat-s3c24xx/sleep.S | 8 +-- 9 files changed, 171 insertions(+), 110 deletions(-) create mode 100644 arch/arm/plat-s3c/pm.c (limited to 'arch/arm') diff --git a/arch/arm/mach-s3c2410/pm.c b/arch/arm/mach-s3c2410/pm.c index a6970f61319..72f96869aa9 100644 --- a/arch/arm/mach-s3c2410/pm.c +++ b/arch/arm/mach-s3c2410/pm.c @@ -37,21 +37,14 @@ #include #include -#ifdef CONFIG_S3C2410_PM_DEBUG -extern void pm_dbg(const char *fmt, ...); -#define DBG(fmt...) pm_dbg(fmt) -#else -#define DBG(fmt...) printk(KERN_DEBUG fmt) -#endif - static void s3c2410_pm_prepare(void) { /* ensure at least GSTATUS3 has the resume address */ __raw_writel(virt_to_phys(s3c2410_cpu_resume), S3C2410_GSTATUS3); - DBG("GSTATUS3 0x%08x\n", __raw_readl(S3C2410_GSTATUS3)); - DBG("GSTATUS4 0x%08x\n", __raw_readl(S3C2410_GSTATUS4)); + S3C_PMDBG("GSTATUS3 0x%08x\n", __raw_readl(S3C2410_GSTATUS3)); + S3C_PMDBG("GSTATUS4 0x%08x\n", __raw_readl(S3C2410_GSTATUS4)); if (machine_is_h1940()) { void *base = phys_to_virt(H1940_SUSPEND_CHECK); diff --git a/arch/arm/mach-s3c2412/pm.c b/arch/arm/mach-s3c2412/pm.c index 217e9e4ed45..c9cfe40e21f 100644 --- a/arch/arm/mach-s3c2412/pm.c +++ b/arch/arm/mach-s3c2412/pm.c @@ -85,7 +85,7 @@ static struct sleep_save s3c2412_sleep[] = { static int s3c2412_pm_suspend(struct sys_device *dev, pm_message_t state) { - s3c2410_pm_do_save(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep)); + s3c_pm_do_save(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep)); return 0; } @@ -98,7 +98,7 @@ static int s3c2412_pm_resume(struct sys_device *dev) tmp |= S3C2412_PWRCFG_STANDBYWFI_IDLE; __raw_writel(tmp, S3C2412_PWRCFG); - s3c2410_pm_do_restore(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep)); + s3c_pm_do_restore(s3c2412_sleep, ARRAY_SIZE(s3c2412_sleep)); return 0; } diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile index 39195f972d5..afd8d089ba1 100644 --- a/arch/arm/plat-s3c/Makefile +++ b/arch/arm/plat-s3c/Makefile @@ -18,6 +18,10 @@ obj-y += pwm-clock.o obj-y += gpio.o obj-y += gpio-config.o +# PM support + +obj-$(CONFIG_PM) += pm.o + # devices obj-$(CONFIG_S3C_DEV_HSMMC) += dev-hsmmc.o diff --git a/arch/arm/plat-s3c/include/plat/pm.h b/arch/arm/plat-s3c/include/plat/pm.h index cc623667e48..a1520997ab8 100644 --- a/arch/arm/plat-s3c/include/plat/pm.h +++ b/arch/arm/plat-s3c/include/plat/pm.h @@ -1,6 +1,7 @@ /* linux/include/asm-arm/plat-s3c24xx/pm.h * * Copyright (c) 2004 Simtec Electronics + * http://armlinux.simtec.co.uk/ * Written by Ben Dooks, * * This program is free software; you can redistribute it and/or modify @@ -49,10 +50,18 @@ extern int s3c2410_cpu_save(unsigned long *saveblk); extern void s3c2410_cpu_suspend(void); extern void s3c2410_cpu_resume(void); -extern unsigned long s3c2410_sleep_save_phys; +extern unsigned long s3c_sleep_save_phys; /* sleep save info */ +/** + * struct sleep_save - save information for shared peripherals. + * @reg: Pointer to the register to save. + * @val: Holder for the value saved from reg. + * + * This describes a list of registers which is used by the pm core and + * other subsystem to save and restore register values over suspend. + */ struct sleep_save { void __iomem *reg; unsigned long val; @@ -61,8 +70,11 @@ struct sleep_save { #define SAVE_ITEM(x) \ { .reg = (x) } -extern void s3c2410_pm_do_save(struct sleep_save *ptr, int count); -extern void s3c2410_pm_do_restore(struct sleep_save *ptr, int count); +/* helper functions to save/restore lists of registers. */ + +extern void s3c_pm_do_save(struct sleep_save *ptr, int count); +extern void s3c_pm_do_restore(struct sleep_save *ptr, int count); +extern void s3c_pm_do_restore_core(struct sleep_save *ptr, int count); #ifdef CONFIG_PM extern int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state); @@ -71,3 +83,21 @@ extern int s3c24xx_irq_resume(struct sys_device *dev); #define s3c24xx_irq_suspend NULL #define s3c24xx_irq_resume NULL #endif + +/* PM debug functions */ + +#ifdef CONFIG_S3C2410_PM_DEBUG +/** + * s3c_pm_dbg() - low level debug function for use in suspend/resume. + * @msg: The message to print. + * + * This function is used mainly to debug the resume process before the system + * can rely on printk/console output. It uses the low-level debugging output + * routine printascii() to do its work. + */ +extern void s3c_pm_dbg(const char *msg, ...); + +#define S3C_PMDBG(fmt...) s3c_pm_dbg(fmt) +#else +#define S3C_PMDBG(fmt...) printk(KERN_DEBUG fmt) +#endif diff --git a/arch/arm/plat-s3c/pm.c b/arch/arm/plat-s3c/pm.c new file mode 100644 index 00000000000..122e9b91a7f --- /dev/null +++ b/arch/arm/plat-s3c/pm.c @@ -0,0 +1,97 @@ +/* linux/arch/arm/plat-s3c/pm.c + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2004,2006,2008 Simtec Electronics + * Ben Dooks + * http://armlinux.simtec.co.uk/ + * + * S3C common power management (suspend to ram) support. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include +#include +#include + +#include + +/* for external use */ + +unsigned long s3c_pm_flags; + +#ifdef CONFIG_S3C2410_PM_DEBUG +extern void printascii(const char *); + +void s3c_pm_dbg(const char *fmt, ...) +{ + va_list va; + char buff[256]; + + va_start(va, fmt); + vsprintf(buff, fmt, va); + va_end(va); + + printascii(buff); +} +#endif /* CONFIG_S3C2410_PM_DEBUG */ + + +/* helper functions to save and restore register state */ + +/** + * s3c_pm_do_save() - save a set of registers for restoration on resume. + * @ptr: Pointer to an array of registers. + * @count: Size of the ptr array. + * + * Run through the list of registers given, saving their contents in the + * array for later restoration when we wakeup. + */ +void s3c_pm_do_save(struct sleep_save *ptr, int count) +{ + for (; count > 0; count--, ptr++) { + ptr->val = __raw_readl(ptr->reg); + S3C_PMDBG("saved %p value %08lx\n", ptr->reg, ptr->val); + } +} + +/** + * s3c_pm_do_restore() - restore register values from the save list. + * @ptr: Pointer to an array of registers. + * @count: Size of the ptr array. + * + * Restore the register values saved from s3c_pm_do_save(). + * + * Note, we do not use S3C_PMDBG() in here, as the system may not have + * restore the UARTs state yet +*/ + +void s3c_pm_do_restore(struct sleep_save *ptr, int count) +{ + for (; count > 0; count--, ptr++) { + printk(KERN_DEBUG "restore %p (restore %08lx, was %08x)\n", + ptr->reg, ptr->val, __raw_readl(ptr->reg)); + + __raw_writel(ptr->val, ptr->reg); + } +} + +/** + * s3c_pm_do_restore_core() - early restore register values from save list. + * + * This is similar to s3c_pm_do_restore() except we try and minimise the + * side effects of the function in case registers that hardware might need + * to work has been restored. + * + * WARNING: Do not put any debug in here that may effect memory or use + * peripherals, as things may be changing! +*/ + +void s3c_pm_do_restore_core(struct sleep_save *ptr, int count) +{ + for (; count > 0; count--, ptr++) + __raw_writel(ptr->val, ptr->reg); +} diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c index 0192ecdc144..2fa8c9f4b35 100644 --- a/arch/arm/plat-s3c24xx/irq.c +++ b/arch/arm/plat-s3c24xx/irq.c @@ -616,7 +616,7 @@ int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state) for (i = 0; i < ARRAY_SIZE(save_eintflt); i++) save_eintflt[i] = __raw_readl(S3C24XX_EINFLT0 + (i*4)); - s3c2410_pm_do_save(irq_save, ARRAY_SIZE(irq_save)); + s3c_pm_do_save(irq_save, ARRAY_SIZE(irq_save)); save_eintmask = __raw_readl(S3C24XX_EINTMASK); return 0; @@ -632,7 +632,7 @@ int s3c24xx_irq_resume(struct sys_device *dev) for (i = 0; i < ARRAY_SIZE(save_eintflt); i++) __raw_writel(save_eintflt[i], S3C24XX_EINFLT0 + (i*4)); - s3c2410_pm_do_restore(irq_save, ARRAY_SIZE(irq_save)); + s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save)); __raw_writel(save_eintmask, S3C24XX_EINTMASK); return 0; diff --git a/arch/arm/plat-s3c24xx/pm.c b/arch/arm/plat-s3c24xx/pm.c index 34ef18e5b2a..c161f9c9a1d 100644 --- a/arch/arm/plat-s3c24xx/pm.c +++ b/arch/arm/plat-s3c24xx/pm.c @@ -49,9 +49,6 @@ #include -/* for external use */ - -unsigned long s3c_pm_flags; #define PFX "s3c24xx-pm: " @@ -143,20 +140,6 @@ static struct sleep_save uart_save[] = { * system never wakes up from the sleep */ -extern void printascii(const char *); - -void pm_dbg(const char *fmt, ...) -{ - va_list va; - char buff[256]; - - va_start(va, fmt); - vsprintf(buff, fmt, va); - va_end(va); - - printascii(buff); -} - static void s3c2410_pm_debug_init(void) { unsigned long tmp = __raw_readl(S3C2410_CLKCON); @@ -170,10 +153,7 @@ static void s3c2410_pm_debug_init(void) udelay(10); } -#define DBG(fmt...) pm_dbg(fmt) #else -#define DBG(fmt...) printk(KERN_DEBUG fmt) - #define s3c2410_pm_debug_init() do { } while(0) static struct sleep_save uart_save[] = {}; @@ -211,7 +191,7 @@ static void s3c2410_pm_run_res(struct resource *ptr, run_fn_t fn, u32 *arg) if ((ptr->flags & IORESOURCE_MEM) && strcmp(ptr->name, "System RAM") == 0) { - DBG("Found system RAM at %08lx..%08lx\n", + S3C_PMDBG("Found system RAM at %08lx..%08lx\n", ptr->start, ptr->end); arg = (fn)(ptr, arg); } @@ -232,7 +212,7 @@ static u32 *s3c2410_pm_countram(struct resource *res, u32 *val) size += CHECK_CHUNKSIZE-1; size /= CHECK_CHUNKSIZE; - DBG("Area %08lx..%08lx, %d blocks\n", res->start, res->end, size); + S3C_PMDBG("Area %08lx..%08lx, %d blocks\n", res->start, res->end, size); *val += size * sizeof(u32); return val; @@ -252,7 +232,7 @@ static void s3c2410_pm_check_prepare(void) s3c2410_pm_run_sysram(s3c2410_pm_countram, &crc_size); - DBG("s3c2410_pm_prepare_check: %u checks needed\n", crc_size); + S3C_PMDBG("s3c2410_pm_prepare_check: %u checks needed\n", crc_size); crcs = kmalloc(crc_size+4, GFP_KERNEL); if (crcs == NULL) @@ -308,7 +288,7 @@ static inline int in_region(void *ptr, int size, void *what, size_t whatsz) static u32 *s3c2410_pm_runcheck(struct resource *res, u32 *val) { - void *save_at = phys_to_virt(s3c2410_sleep_save_phys); + void *save_at = phys_to_virt(s3c_sleep_save_phys); unsigned long addr; unsigned long left; void *ptr; @@ -324,12 +304,12 @@ static u32 *s3c2410_pm_runcheck(struct resource *res, u32 *val) ptr = phys_to_virt(addr); if (in_region(ptr, left, crcs, crc_size)) { - DBG("skipping %08lx, has crc block in\n", addr); + S3C_PMDBG("skipping %08lx, has crc block in\n", addr); goto skip_check; } if (in_region(ptr, left, save_at, 32*4 )) { - DBG("skipping %08lx, has save block in\n", addr); + S3C_PMDBG("skipping %08lx, has save block in\n", addr); goto skip_check; } @@ -340,7 +320,7 @@ static u32 *s3c2410_pm_runcheck(struct resource *res, u32 *val) printk(KERN_ERR PFX "Restore CRC error at " "%08lx (%08x vs %08x)\n", addr, calc, *val); - DBG("Restore CRC error at %08lx (%08x vs %08x)\n", + S3C_PMDBG("Restore CRC error at %08lx (%08x vs %08x)\n", addr, calc, *val); } @@ -373,49 +353,6 @@ static void s3c2410_pm_check_restore(void) #define s3c2410_pm_check_store() do { } while(0) #endif -/* helper functions to save and restore register state */ - -void s3c2410_pm_do_save(struct sleep_save *ptr, int count) -{ - for (; count > 0; count--, ptr++) { - ptr->val = __raw_readl(ptr->reg); - DBG("saved %p value %08lx\n", ptr->reg, ptr->val); - } -} - -/* s3c2410_pm_do_restore - * - * restore the system from the given list of saved registers - * - * Note, we do not use DBG() in here, as the system may not have - * restore the UARTs state yet -*/ - -void s3c2410_pm_do_restore(struct sleep_save *ptr, int count) -{ - for (; count > 0; count--, ptr++) { - printk(KERN_DEBUG "restore %p (restore %08lx, was %08x)\n", - ptr->reg, ptr->val, __raw_readl(ptr->reg)); - - __raw_writel(ptr->val, ptr->reg); - } -} - -/* s3c2410_pm_do_restore_core - * - * similar to s3c2410_pm_do_restore_core - * - * WARNING: Do not put any debug in here that may effect memory or use - * peripherals, as things may be changing! -*/ - -static void s3c2410_pm_do_restore_core(struct sleep_save *ptr, int count) -{ - for (; count > 0; count--, ptr++) { - __raw_writel(ptr->val, ptr->reg); - } -} - /* s3c2410_pm_show_resume_irqs * * print any IRQs asserted at resume time (ie, we woke from) @@ -430,7 +367,7 @@ static void s3c2410_pm_show_resume_irqs(int start, unsigned long which, for (i = 0; i <= 31; i++) { if ((which) & (1L<gpup, base + OFFS_UP); } - DBG("GPIO[%d] CON %08lx => %08lx, DAT %08lx => %08lx\n", - index, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat); + S3C_PMDBG("GPIO[%d] CON %08lx => %08lx, DAT %08lx => %08lx\n", + index, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat); } @@ -684,7 +621,7 @@ static int s3c2410_pm_enter(suspend_state_t state) s3c2410_pm_debug_init(); - DBG("s3c2410_pm_enter(%d)\n", state); + S3C_PMDBG("s3c2410_pm_enter(%d)\n", state); if (pm_cpu_prep == NULL || pm_cpu_sleep == NULL) { printk(KERN_ERR PFX "error: no cpu sleep functions set\n"); @@ -709,22 +646,22 @@ static int s3c2410_pm_enter(suspend_state_t state) /* store the physical address of the register recovery block */ - s3c2410_sleep_save_phys = virt_to_phys(regs_save); + s3c_sleep_save_phys = virt_to_phys(regs_save); - DBG("s3c2410_sleep_save_phys=0x%08lx\n", s3c2410_sleep_save_phys); + S3C_PMDBG("s3c_sleep_save_phys=0x%08lx\n", s3c_sleep_save_phys); /* save all necessary core registers not covered by the drivers */ s3c2410_pm_save_gpios(); - s3c2410_pm_do_save(misc_save, ARRAY_SIZE(misc_save)); - s3c2410_pm_do_save(core_save, ARRAY_SIZE(core_save)); - s3c2410_pm_do_save(uart_save, ARRAY_SIZE(uart_save)); + s3c_pm_do_save(misc_save, ARRAY_SIZE(misc_save)); + s3c_pm_do_save(core_save, ARRAY_SIZE(core_save)); + s3c_pm_do_save(uart_save, ARRAY_SIZE(uart_save)); /* set the irq configuration for wake */ s3c2410_pm_configure_extint(); - DBG("sleep: irq wakeup masks: %08lx,%08lx\n", + S3C_PMDBG("sleep: irq wakeup masks: %08lx,%08lx\n", s3c_irqwake_intmask, s3c_irqwake_eintmask); __raw_writel(s3c_irqwake_intmask, S3C2410_INTMSK); @@ -765,16 +702,16 @@ static int s3c2410_pm_enter(suspend_state_t state) /* restore the system state */ - s3c2410_pm_do_restore_core(core_save, ARRAY_SIZE(core_save)); - s3c2410_pm_do_restore(misc_save, ARRAY_SIZE(misc_save)); - s3c2410_pm_do_restore(uart_save, ARRAY_SIZE(uart_save)); + s3c_pm_do_restore_core(core_save, ARRAY_SIZE(core_save)); + s3c_pm_do_restore(misc_save, ARRAY_SIZE(misc_save)); + s3c_pm_do_restore(uart_save, ARRAY_SIZE(uart_save)); s3c2410_pm_restore_gpios(); s3c2410_pm_debug_init(); /* check what irq (if any) restored the system */ - DBG("post sleep: IRQs 0x%08x, 0x%08x\n", + S3C_PMDBG("post sleep: IRQs 0x%08x, 0x%08x\n", __raw_readl(S3C2410_SRCPND), __raw_readl(S3C2410_EINTPEND)); @@ -784,13 +721,13 @@ static int s3c2410_pm_enter(suspend_state_t state) s3c2410_pm_show_resume_irqs(IRQ_EINT4-4, __raw_readl(S3C2410_EINTPEND), s3c_irqwake_eintmask); - DBG("post sleep, preparing to return\n"); + S3C_PMDBG("post sleep, preparing to return\n"); s3c2410_pm_check_restore(); /* ok, let's return from sleep */ - DBG("S3C2410 PM Resume (post-restore)\n"); + S3C_PMDBG("S3C2410 PM Resume (post-restore)\n"); return 0; } diff --git a/arch/arm/plat-s3c24xx/s3c244x.c b/arch/arm/plat-s3c24xx/s3c244x.c index c1de6bb0101..1364317d421 100644 --- a/arch/arm/plat-s3c24xx/s3c244x.c +++ b/arch/arm/plat-s3c24xx/s3c244x.c @@ -145,13 +145,13 @@ static struct sleep_save s3c244x_sleep[] = { static int s3c244x_suspend(struct sys_device *dev, pm_message_t state) { - s3c2410_pm_do_save(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep)); + s3c_pm_do_save(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep)); return 0; } static int s3c244x_resume(struct sys_device *dev) { - s3c2410_pm_do_restore(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep)); + s3c_pm_do_restore(s3c244x_sleep, ARRAY_SIZE(s3c244x_sleep)); return 0; } diff --git a/arch/arm/plat-s3c24xx/sleep.S b/arch/arm/plat-s3c24xx/sleep.S index 76594b21280..7c1955ff317 100644 --- a/arch/arm/plat-s3c24xx/sleep.S +++ b/arch/arm/plat-s3c24xx/sleep.S @@ -84,7 +84,7 @@ resume_with_mmu: .ltorg @@ the next bits sit in the .data segment, even though they - @@ happen to be code... the s3c2410_sleep_save_phys needs to be + @@ happen to be code... the s3c_sleep_save_phys needs to be @@ accessed by the resume code before it can restore the MMU. @@ This means that the variable has to be close enough for the @@ code to read it... since the .text segment needs to be RO, @@ -92,8 +92,8 @@ resume_with_mmu: .data - .global s3c2410_sleep_save_phys -s3c2410_sleep_save_phys: + .global s3c_sleep_save_phys +s3c_sleep_save_phys: .word 0 @@ -145,7 +145,7 @@ ENTRY(s3c2410_cpu_resume) mcr p15, 0, r1, c8, c7, 0 @@ invalidate I & D TLBs mcr p15, 0, r1, c7, c7, 0 @@ invalidate I & D caches - ldr r0, s3c2410_sleep_save_phys @ address of restore block + ldr r0, s3c_sleep_save_phys @ address of restore block ldmia r0, { r4 - r13 } mcr p15, 0, r4, c13, c0, 0 @ PID -- cgit v1.2.3 From 549c7e33aeb9bfe441ecf68639d2227bb90978e7 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 12 Dec 2008 00:24:07 +0000 Subject: [ARM] S3C: Split the resume memory check code from pm.c Split the optional memory check code out of the pm.c file as it is quite a big #ifdef block and as-such can be moved out and simply compiled when the configuration is set. Signed-off-by: Ben Dooks --- arch/arm/plat-s3c/Makefile | 1 + arch/arm/plat-s3c/include/plat/pm.h | 12 ++ arch/arm/plat-s3c/pm-check.c | 220 ++++++++++++++++++++++++++++++++++++ arch/arm/plat-s3c24xx/pm.c | 210 ++-------------------------------- 4 files changed, 240 insertions(+), 203 deletions(-) create mode 100644 arch/arm/plat-s3c/pm-check.c (limited to 'arch/arm') diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile index afd8d089ba1..8d7815d25a5 100644 --- a/arch/arm/plat-s3c/Makefile +++ b/arch/arm/plat-s3c/Makefile @@ -21,6 +21,7 @@ obj-y += gpio-config.o # PM support obj-$(CONFIG_PM) += pm.o +obj-$(CONFIG_S3C2410_PM_CHECK) += pm-check.o # devices diff --git a/arch/arm/plat-s3c/include/plat/pm.h b/arch/arm/plat-s3c/include/plat/pm.h index a1520997ab8..95c2612d497 100644 --- a/arch/arm/plat-s3c/include/plat/pm.h +++ b/arch/arm/plat-s3c/include/plat/pm.h @@ -101,3 +101,15 @@ extern void s3c_pm_dbg(const char *msg, ...); #else #define S3C_PMDBG(fmt...) printk(KERN_DEBUG fmt) #endif + +/* suspend memory checking */ + +#ifdef CONFIG_S3C2410_PM_CHECK +extern void s3c_pm_check_prepare(void); +extern void s3c_pm_check_restore(void); +extern void s3c_pm_check_store(void); +#else +#define s3c_pm_check_prepare() do { } while(0) +#define s3c_pm_check_restore() do { } while(0) +#define s3c_pm_check_store() do { } while(0) +#endif diff --git a/arch/arm/plat-s3c/pm-check.c b/arch/arm/plat-s3c/pm-check.c new file mode 100644 index 00000000000..95ba7693b5a --- /dev/null +++ b/arch/arm/plat-s3c/pm-check.c @@ -0,0 +1,220 @@ +/* linux/arch/arm/plat-s3c/pm-check.c + * originally in linux/arch/arm/plat-s3c24xx/pm.c + * + * Copyright (c) 2004,2006,2008 Simtec Electronics + * http://armlinux.simtec.co.uk + * Ben Dooks + * + * S3C Power Mangament - suspend/resume memory corruptiuon check. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include +#include +#include +#include + +#include + +#if CONFIG_S3C2410_PM_CHECK_CHUNKSIZE < 1 +#error CONFIG_S3C2410_PM_CHECK_CHUNKSIZE must be a positive non-zero value +#endif + +/* suspend checking code... + * + * this next area does a set of crc checks over all the installed + * memory, so the system can verify if the resume was ok. + * + * CONFIG_S3C2410_PM_CHECK_CHUNKSIZE defines the block-size for the CRC, + * increasing it will mean that the area corrupted will be less easy to spot, + * and reducing the size will cause the CRC save area to grow +*/ + +#define CHECK_CHUNKSIZE (CONFIG_S3C2410_PM_CHECK_CHUNKSIZE * 1024) + +static u32 crc_size; /* size needed for the crc block */ +static u32 *crcs; /* allocated over suspend/resume */ + +typedef u32 *(run_fn_t)(struct resource *ptr, u32 *arg); + +/* s3c_pm_run_res + * + * go through the given resource list, and look for system ram +*/ + +static void s3c_pm_run_res(struct resource *ptr, run_fn_t fn, u32 *arg) +{ + while (ptr != NULL) { + if (ptr->child != NULL) + s3c_pm_run_res(ptr->child, fn, arg); + + if ((ptr->flags & IORESOURCE_MEM) && + strcmp(ptr->name, "System RAM") == 0) { + S3C_PMDBG("Found system RAM at %08lx..%08lx\n", + ptr->start, ptr->end); + arg = (fn)(ptr, arg); + } + + ptr = ptr->sibling; + } +} + +static void s3c_pm_run_sysram(run_fn_t fn, u32 *arg) +{ + s3c_pm_run_res(&iomem_resource, fn, arg); +} + +static u32 *s3c_pm_countram(struct resource *res, u32 *val) +{ + u32 size = (u32)(res->end - res->start)+1; + + size += CHECK_CHUNKSIZE-1; + size /= CHECK_CHUNKSIZE; + + S3C_PMDBG("Area %08lx..%08lx, %d blocks\n", res->start, res->end, size); + + *val += size * sizeof(u32); + return val; +} + +/* s3c_pm_prepare_check + * + * prepare the necessary information for creating the CRCs. This + * must be done before the final save, as it will require memory + * allocating, and thus touching bits of the kernel we do not + * know about. +*/ + +void s3c_pm_check_prepare(void) +{ + crc_size = 0; + + s3c_pm_run_sysram(s3c_pm_countram, &crc_size); + + S3C_PMDBG("s3c_pm_prepare_check: %u checks needed\n", crc_size); + + crcs = kmalloc(crc_size+4, GFP_KERNEL); + if (crcs == NULL) + printk(KERN_ERR "Cannot allocated CRC save area\n"); +} + +static u32 *s3c_pm_makecheck(struct resource *res, u32 *val) +{ + unsigned long addr, left; + + for (addr = res->start; addr < res->end; + addr += CHECK_CHUNKSIZE) { + left = res->end - addr; + + if (left > CHECK_CHUNKSIZE) + left = CHECK_CHUNKSIZE; + + *val = crc32_le(~0, phys_to_virt(addr), left); + val++; + } + + return val; +} + +/* s3c_pm_check_store + * + * compute the CRC values for the memory blocks before the final + * sleep. +*/ + +void s3c_pm_check_store(void) +{ + if (crcs != NULL) + s3c_pm_run_sysram(s3c_pm_makecheck, crcs); +} + +/* in_region + * + * return TRUE if the area defined by ptr..ptr+size contains the + * what..what+whatsz +*/ + +static inline int in_region(void *ptr, int size, void *what, size_t whatsz) +{ + if ((what+whatsz) < ptr) + return 0; + + if (what > (ptr+size)) + return 0; + + return 1; +} + +/** + * s3c_pm_runcheck*() - helper to check a resource on restore. + * @res: The resource to check + * @vak: Pointer to list of CRC32 values to check. + * + * Called from the s3c_pm_check_restore() via s3c_pm_run_sysram(), this + * function runs the given memory resource checking it against the stored + * CRC to ensure that memory is restored. The function tries to skip as + * many of the areas used during the suspend process. + */ +static u32 *s3c_pm_runcheck(struct resource *res, u32 *val) +{ + void *save_at = phys_to_virt(s3c_sleep_save_phys); + unsigned long addr; + unsigned long left; + void *ptr; + u32 calc; + + for (addr = res->start; addr < res->end; + addr += CHECK_CHUNKSIZE) { + left = res->end - addr; + + if (left > CHECK_CHUNKSIZE) + left = CHECK_CHUNKSIZE; + + ptr = phys_to_virt(addr); + + if (in_region(ptr, left, crcs, crc_size)) { + S3C_PMDBG("skipping %08lx, has crc block in\n", addr); + goto skip_check; + } + + if (in_region(ptr, left, save_at, 32*4 )) { + S3C_PMDBG("skipping %08lx, has save block in\n", addr); + goto skip_check; + } + + /* calculate and check the checksum */ + + calc = crc32_le(~0, ptr, left); + if (calc != *val) { + printk(KERN_ERR "Restore CRC error at " + "%08lx (%08x vs %08x)\n", addr, calc, *val); + + S3C_PMDBG("Restore CRC error at %08lx (%08x vs %08x)\n", + addr, calc, *val); + } + + skip_check: + val++; + } + + return val; +} + +/** + * s3c_pm_check_restore() - memory check called on resume + * + * check the CRCs after the restore event and free the memory used + * to hold them +*/ +void s3c_pm_check_restore(void) +{ + if (crcs != NULL) { + s3c_pm_run_sysram(s3c_pm_runcheck, crcs); + kfree(crcs); + crcs = NULL; + } +} diff --git a/arch/arm/plat-s3c24xx/pm.c b/arch/arm/plat-s3c24xx/pm.c index c161f9c9a1d..e2ae12da16e 100644 --- a/arch/arm/plat-s3c24xx/pm.c +++ b/arch/arm/plat-s3c24xx/pm.c @@ -31,8 +31,6 @@ #include #include #include -#include -#include #include #include @@ -159,200 +157,6 @@ static void s3c2410_pm_debug_init(void) static struct sleep_save uart_save[] = {}; #endif -#if defined(CONFIG_S3C2410_PM_CHECK) && CONFIG_S3C2410_PM_CHECK_CHUNKSIZE != 0 - -/* suspend checking code... - * - * this next area does a set of crc checks over all the installed - * memory, so the system can verify if the resume was ok. - * - * CONFIG_S3C2410_PM_CHECK_CHUNKSIZE defines the block-size for the CRC, - * increasing it will mean that the area corrupted will be less easy to spot, - * and reducing the size will cause the CRC save area to grow -*/ - -#define CHECK_CHUNKSIZE (CONFIG_S3C2410_PM_CHECK_CHUNKSIZE * 1024) - -static u32 crc_size; /* size needed for the crc block */ -static u32 *crcs; /* allocated over suspend/resume */ - -typedef u32 *(run_fn_t)(struct resource *ptr, u32 *arg); - -/* s3c2410_pm_run_res - * - * go thorugh the given resource list, and look for system ram -*/ - -static void s3c2410_pm_run_res(struct resource *ptr, run_fn_t fn, u32 *arg) -{ - while (ptr != NULL) { - if (ptr->child != NULL) - s3c2410_pm_run_res(ptr->child, fn, arg); - - if ((ptr->flags & IORESOURCE_MEM) && - strcmp(ptr->name, "System RAM") == 0) { - S3C_PMDBG("Found system RAM at %08lx..%08lx\n", - ptr->start, ptr->end); - arg = (fn)(ptr, arg); - } - - ptr = ptr->sibling; - } -} - -static void s3c2410_pm_run_sysram(run_fn_t fn, u32 *arg) -{ - s3c2410_pm_run_res(&iomem_resource, fn, arg); -} - -static u32 *s3c2410_pm_countram(struct resource *res, u32 *val) -{ - u32 size = (u32)(res->end - res->start)+1; - - size += CHECK_CHUNKSIZE-1; - size /= CHECK_CHUNKSIZE; - - S3C_PMDBG("Area %08lx..%08lx, %d blocks\n", res->start, res->end, size); - - *val += size * sizeof(u32); - return val; -} - -/* s3c2410_pm_prepare_check - * - * prepare the necessary information for creating the CRCs. This - * must be done before the final save, as it will require memory - * allocating, and thus touching bits of the kernel we do not - * know about. -*/ - -static void s3c2410_pm_check_prepare(void) -{ - crc_size = 0; - - s3c2410_pm_run_sysram(s3c2410_pm_countram, &crc_size); - - S3C_PMDBG("s3c2410_pm_prepare_check: %u checks needed\n", crc_size); - - crcs = kmalloc(crc_size+4, GFP_KERNEL); - if (crcs == NULL) - printk(KERN_ERR "Cannot allocated CRC save area\n"); -} - -static u32 *s3c2410_pm_makecheck(struct resource *res, u32 *val) -{ - unsigned long addr, left; - - for (addr = res->start; addr < res->end; - addr += CHECK_CHUNKSIZE) { - left = res->end - addr; - - if (left > CHECK_CHUNKSIZE) - left = CHECK_CHUNKSIZE; - - *val = crc32_le(~0, phys_to_virt(addr), left); - val++; - } - - return val; -} - -/* s3c2410_pm_check_store - * - * compute the CRC values for the memory blocks before the final - * sleep. -*/ - -static void s3c2410_pm_check_store(void) -{ - if (crcs != NULL) - s3c2410_pm_run_sysram(s3c2410_pm_makecheck, crcs); -} - -/* in_region - * - * return TRUE if the area defined by ptr..ptr+size contatins the - * what..what+whatsz -*/ - -static inline int in_region(void *ptr, int size, void *what, size_t whatsz) -{ - if ((what+whatsz) < ptr) - return 0; - - if (what > (ptr+size)) - return 0; - - return 1; -} - -static u32 *s3c2410_pm_runcheck(struct resource *res, u32 *val) -{ - void *save_at = phys_to_virt(s3c_sleep_save_phys); - unsigned long addr; - unsigned long left; - void *ptr; - u32 calc; - - for (addr = res->start; addr < res->end; - addr += CHECK_CHUNKSIZE) { - left = res->end - addr; - - if (left > CHECK_CHUNKSIZE) - left = CHECK_CHUNKSIZE; - - ptr = phys_to_virt(addr); - - if (in_region(ptr, left, crcs, crc_size)) { - S3C_PMDBG("skipping %08lx, has crc block in\n", addr); - goto skip_check; - } - - if (in_region(ptr, left, save_at, 32*4 )) { - S3C_PMDBG("skipping %08lx, has save block in\n", addr); - goto skip_check; - } - - /* calculate and check the checksum */ - - calc = crc32_le(~0, ptr, left); - if (calc != *val) { - printk(KERN_ERR PFX "Restore CRC error at " - "%08lx (%08x vs %08x)\n", addr, calc, *val); - - S3C_PMDBG("Restore CRC error at %08lx (%08x vs %08x)\n", - addr, calc, *val); - } - - skip_check: - val++; - } - - return val; -} - -/* s3c2410_pm_check_restore - * - * check the CRCs after the restore event and free the memory used - * to hold them -*/ - -static void s3c2410_pm_check_restore(void) -{ - if (crcs != NULL) { - s3c2410_pm_run_sysram(s3c2410_pm_runcheck, crcs); - kfree(crcs); - crcs = NULL; - } -} - -#else - -#define s3c2410_pm_check_prepare() do { } while(0) -#define s3c2410_pm_check_restore() do { } while(0) -#define s3c2410_pm_check_store() do { } while(0) -#endif - /* s3c2410_pm_show_resume_irqs * * print any IRQs asserted at resume time (ie, we woke from) @@ -372,13 +176,13 @@ static void s3c2410_pm_show_resume_irqs(int start, unsigned long which, } } -/* s3c2410_pm_check_resume_pin +/* s3c_pm_check_resume_pin * * check to see if the pin is configured correctly for sleep mode, and * make any necessary adjustments if it is not */ -static void s3c2410_pm_check_resume_pin(unsigned int pin, unsigned int irqoffs) +static void s3c_pm_check_resume_pin(unsigned int pin, unsigned int irqoffs) { unsigned long irqstate; unsigned long pinstate; @@ -417,11 +221,11 @@ static void s3c2410_pm_configure_extint(void) */ for (pin = S3C2410_GPF0; pin <= S3C2410_GPF7; pin++) { - s3c2410_pm_check_resume_pin(pin, pin - S3C2410_GPF0); + s3c_pm_check_resume_pin(pin, pin - S3C2410_GPF0); } for (pin = S3C2410_GPG0; pin <= S3C2410_GPG7; pin++) { - s3c2410_pm_check_resume_pin(pin, (pin - S3C2410_GPG0)+8); + s3c_pm_check_resume_pin(pin, (pin - S3C2410_GPG0)+8); } } @@ -642,7 +446,7 @@ static int s3c2410_pm_enter(suspend_state_t state) /* prepare check area if configured */ - s3c2410_pm_check_prepare(); + s3c_pm_check_prepare(); /* store the physical address of the register recovery block */ @@ -681,7 +485,7 @@ static int s3c2410_pm_enter(suspend_state_t state) flush_cache_all(); - s3c2410_pm_check_store(); + s3c_pm_check_store(); /* send the cpu to sleep... */ @@ -723,7 +527,7 @@ static int s3c2410_pm_enter(suspend_state_t state) S3C_PMDBG("post sleep, preparing to return\n"); - s3c2410_pm_check_restore(); + s3c_pm_check_restore(); /* ok, let's return from sleep */ -- cgit v1.2.3 From 2261e0e6e3991d4c5f33e9fedadfc465eedc05a7 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 12 Dec 2008 00:24:08 +0000 Subject: [ARM] S3C: Move plat-s3c24xx pm.c support into plat-s3c Move parts of the core and debug suspend code into the plat-s3c for use with the new s3c64xx code. Signed-off-by: Ben Dooks --- arch/arm/plat-s3c/include/plat/pm.h | 27 ++++ arch/arm/plat-s3c/pm.c | 211 +++++++++++++++++++++++++ arch/arm/plat-s3c24xx/include/plat/pm-core.h | 59 +++++++ arch/arm/plat-s3c24xx/pm.c | 224 ++------------------------- 4 files changed, 311 insertions(+), 210 deletions(-) create mode 100644 arch/arm/plat-s3c24xx/include/plat/pm-core.h (limited to 'arch/arm') diff --git a/arch/arm/plat-s3c/include/plat/pm.h b/arch/arm/plat-s3c/include/plat/pm.h index 95c2612d497..42c75e6d2ba 100644 --- a/arch/arm/plat-s3c/include/plat/pm.h +++ b/arch/arm/plat-s3c/include/plat/pm.h @@ -113,3 +113,30 @@ extern void s3c_pm_check_store(void); #define s3c_pm_check_restore() do { } while(0) #define s3c_pm_check_store() do { } while(0) #endif + +/** + * s3c_pm_configure_extint() - ensure pins are correctly set for IRQ + * + * Setup all the necessary GPIO pins for waking the system on external + * interrupt. + */ +extern void s3c_pm_configure_extint(void); + +/** + * s3c_pm_restore_gpios() - restore the state of the gpios after sleep. + * + * Restore the state of the GPIO pins after sleep, which may involve ensuring + * that we do not glitch the state of the pins from that the bootloader's + * resume code has done. +*/ +extern void s3c_pm_restore_gpios(void); + +/** + * s3c_pm_save_gpios() - save the state of the GPIOs for restoring after sleep. + * + * Save the GPIO states for resotration on resume. See s3c_pm_restore_gpios(). + */ +extern void s3c_pm_save_gpios(void); + +extern void s3c_pm_save_core(void); +extern void s3c_pm_restore_core(void); diff --git a/arch/arm/plat-s3c/pm.c b/arch/arm/plat-s3c/pm.c index 122e9b91a7f..fea58bea973 100644 --- a/arch/arm/plat-s3c/pm.c +++ b/arch/arm/plat-s3c/pm.c @@ -15,14 +15,32 @@ #include #include #include +#include +#include #include +#include +#include + +#include +#include +#include +#include +#include + #include +#include /* for external use */ unsigned long s3c_pm_flags; +/* Debug code: + * + * This code supports debug output to the low level UARTs for use on + * resume before the console layer is available. +*/ + #ifdef CONFIG_S3C2410_PM_DEBUG extern void printascii(const char *); @@ -37,8 +55,51 @@ void s3c_pm_dbg(const char *fmt, ...) printascii(buff); } + +static inline void s3c_pm_debug_init(void) +{ + /* restart uart clocks so we can use them to output */ + s3c_pm_debug_init_uart(); +} + +#else +#define s3c_pm_debug_init() do { } while(0) + #endif /* CONFIG_S3C2410_PM_DEBUG */ +/* Save the UART configurations if we are configured for debug. */ + +#ifdef CONFIG_S3C2410_PM_DEBUG + +#define SAVE_UART(va) \ + SAVE_ITEM((va) + S3C2410_ULCON), \ + SAVE_ITEM((va) + S3C2410_UCON), \ + SAVE_ITEM((va) + S3C2410_UFCON), \ + SAVE_ITEM((va) + S3C2410_UMCON), \ + SAVE_ITEM((va) + S3C2410_UBRDIV) + +static struct sleep_save uart_save[] = { + SAVE_UART(S3C_VA_UART0), + SAVE_UART(S3C_VA_UART1), +#ifndef CONFIG_CPU_S3C2400 + SAVE_UART(S3C_VA_UART2), +#endif +}; + +static void s3c_pm_save_uart(void) +{ + s3c_pm_do_save(uart_save, ARRAY_SIZE(uart_save)); +} + +static void s3c_pm_restore_uart(void) +{ + s3c_pm_do_restore(uart_save, ARRAY_SIZE(uart_save)); +} +#else +static void s3c_pm_save_uart(void) { } +static void s3c_pm_restore_uart(void) { } +#endif + /* helper functions to save and restore register state */ @@ -95,3 +156,153 @@ void s3c_pm_do_restore_core(struct sleep_save *ptr, int count) for (; count > 0; count--, ptr++) __raw_writel(ptr->val, ptr->reg); } + +/* s3c2410_pm_show_resume_irqs + * + * print any IRQs asserted at resume time (ie, we woke from) +*/ +static void s3c_pm_show_resume_irqs(int start, unsigned long which, + unsigned long mask) +{ + int i; + + which &= ~mask; + + for (i = 0; i <= 31; i++) { + if (which & (1L< + * http://armlinux.simtec.co.uk/ + * + * S3C24xx - PM core support for arch/arm/plat-s3c/pm.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +static inline void s3c_pm_debug_init_uart(void) +{ + unsigned long tmp = __raw_readl(S3C2410_CLKCON); + + /* re-start uart clocks */ + tmp |= S3C2410_CLKCON_UART0; + tmp |= S3C2410_CLKCON_UART1; + tmp |= S3C2410_CLKCON_UART2; + + __raw_writel(tmp, S3C2410_CLKCON); + udelay(10); +} + +static inline void s3c_pm_arch_prepare_irqs(void) +{ + __raw_writel(s3c_irqwake_intmask, S3C2410_INTMSK); + __raw_writel(s3c_irqwake_eintmask, S3C2410_EINTMASK); + + /* ack any outstanding external interrupts before we go to sleep */ + + __raw_writel(__raw_readl(S3C2410_EINTPEND), S3C2410_EINTPEND); + __raw_writel(__raw_readl(S3C2410_INTPND), S3C2410_INTPND); + __raw_writel(__raw_readl(S3C2410_SRCPND), S3C2410_SRCPND); + +} + +static inline void s3c_pm_arch_stop_clocks(void) +{ + __raw_writel(0x00, S3C2410_CLKCON); /* turn off clocks over sleep */ +} + +static void s3c_pm_show_resume_irqs(int start, unsigned long which, + unsigned long mask); + +static inline void s3c_pm_arch_show_resume_irqs(void) +{ + S3C_PMDBG("post sleep: IRQs 0x%08x, 0x%08x\n", + __raw_readl(S3C2410_SRCPND), + __raw_readl(S3C2410_EINTPEND)); + + s3c_pm_show_resume_irqs(IRQ_EINT0, __raw_readl(S3C2410_SRCPND), + s3c_irqwake_intmask); + + s3c_pm_show_resume_irqs(IRQ_EINT4-4, __raw_readl(S3C2410_EINTPEND), + s3c_irqwake_eintmask); +} diff --git a/arch/arm/plat-s3c24xx/pm.c b/arch/arm/plat-s3c24xx/pm.c index e2ae12da16e..062a29339a9 100644 --- a/arch/arm/plat-s3c24xx/pm.c +++ b/arch/arm/plat-s3c24xx/pm.c @@ -34,9 +34,6 @@ #include #include -#include -#include - #include #include #include @@ -47,7 +44,6 @@ #include - #define PFX "s3c24xx-pm: " static struct sleep_save core_save[] = { @@ -115,66 +111,6 @@ static struct sleep_save misc_save[] = { SAVE_ITEM(S3C2410_DCLKCON), }; -#ifdef CONFIG_S3C2410_PM_DEBUG - -#define SAVE_UART(va) \ - SAVE_ITEM((va) + S3C2410_ULCON), \ - SAVE_ITEM((va) + S3C2410_UCON), \ - SAVE_ITEM((va) + S3C2410_UFCON), \ - SAVE_ITEM((va) + S3C2410_UMCON), \ - SAVE_ITEM((va) + S3C2410_UBRDIV) - -static struct sleep_save uart_save[] = { - SAVE_UART(S3C24XX_VA_UART0), - SAVE_UART(S3C24XX_VA_UART1), -#ifndef CONFIG_CPU_S3C2400 - SAVE_UART(S3C24XX_VA_UART2), -#endif -}; - -/* debug - * - * we send the debug to printascii() to allow it to be seen if the - * system never wakes up from the sleep -*/ - -static void s3c2410_pm_debug_init(void) -{ - unsigned long tmp = __raw_readl(S3C2410_CLKCON); - - /* re-start uart clocks */ - tmp |= S3C2410_CLKCON_UART0; - tmp |= S3C2410_CLKCON_UART1; - tmp |= S3C2410_CLKCON_UART2; - - __raw_writel(tmp, S3C2410_CLKCON); - udelay(10); -} - -#else -#define s3c2410_pm_debug_init() do { } while(0) - -static struct sleep_save uart_save[] = {}; -#endif - -/* s3c2410_pm_show_resume_irqs - * - * print any IRQs asserted at resume time (ie, we woke from) -*/ - -static void s3c2410_pm_show_resume_irqs(int start, unsigned long which, - unsigned long mask) -{ - int i; - - which &= ~mask; - - for (i = 0; i <= 31; i++) { - if ((which) & (1L< Date: Fri, 12 Dec 2008 00:24:09 +0000 Subject: [ARM] S3C: Fix warnings in the PM memory CRC code Fix warnings from struct resource being bigger than unsigned long by forcing the type. We are only a 32bit platform so no physical memory addresses will be too big to fit in this. Signed-off-by: Ben Dooks --- arch/arm/plat-s3c/pm-check.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/plat-s3c/pm-check.c b/arch/arm/plat-s3c/pm-check.c index 95ba7693b5a..b221470e3bf 100644 --- a/arch/arm/plat-s3c/pm-check.c +++ b/arch/arm/plat-s3c/pm-check.c @@ -55,7 +55,8 @@ static void s3c_pm_run_res(struct resource *ptr, run_fn_t fn, u32 *arg) if ((ptr->flags & IORESOURCE_MEM) && strcmp(ptr->name, "System RAM") == 0) { S3C_PMDBG("Found system RAM at %08lx..%08lx\n", - ptr->start, ptr->end); + (unsigned long)ptr->start, + (unsigned long)ptr->end); arg = (fn)(ptr, arg); } @@ -75,7 +76,8 @@ static u32 *s3c_pm_countram(struct resource *res, u32 *val) size += CHECK_CHUNKSIZE-1; size /= CHECK_CHUNKSIZE; - S3C_PMDBG("Area %08lx..%08lx, %d blocks\n", res->start, res->end, size); + S3C_PMDBG("Area %08lx..%08lx, %d blocks\n", + (unsigned long)res->start, (unsigned long)res->end, size); *val += size * sizeof(u32); return val; -- cgit v1.2.3 From 65fa22b73f95c481db125ba9a34de1553c638548 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 12 Dec 2008 00:24:10 +0000 Subject: [ARM] S3C24XX: Split PM code from arch/arm/plat-s3c24xx/irq.c Split the PM code out of arch/arm/plat-s3c24xx/irq.c to remove some of the #ifdefs being used. Also fix a couple of places where the absecnce of a function was redefined to the same thing. Signed-off-by: Ben Dooks --- arch/arm/plat-s3c24xx/Makefile | 1 + arch/arm/plat-s3c24xx/include/plat/irq.h | 8 +++ arch/arm/plat-s3c24xx/irq-pm.c | 116 ++++++++++++++++++++++++++++++ arch/arm/plat-s3c24xx/irq.c | 118 ------------------------------- 4 files changed, 125 insertions(+), 118 deletions(-) create mode 100644 arch/arm/plat-s3c24xx/irq-pm.c (limited to 'arch/arm') diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile index 1e0767b266b..636cb12711d 100644 --- a/arch/arm/plat-s3c24xx/Makefile +++ b/arch/arm/plat-s3c24xx/Makefile @@ -27,6 +27,7 @@ obj-$(CONFIG_CPU_S3C244X) += s3c244x-irq.o obj-$(CONFIG_CPU_S3C244X) += s3c244x-clock.o obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o obj-$(CONFIG_PM) += pm.o +obj-$(CONFIG_PM) += irq-pm.o obj-$(CONFIG_PM) += sleep.o obj-$(CONFIG_HAVE_PWM) += pwm.o obj-$(CONFIG_S3C2410_CLOCK) += s3c2410-clock.o diff --git a/arch/arm/plat-s3c24xx/include/plat/irq.h b/arch/arm/plat-s3c24xx/include/plat/irq.h index 45746a99534..97b6884ea0d 100644 --- a/arch/arm/plat-s3c24xx/include/plat/irq.h +++ b/arch/arm/plat-s3c24xx/include/plat/irq.h @@ -10,6 +10,12 @@ * published by the Free Software Foundation. */ +#include + +#include +#include +#include + #define irqdbf(x...) #define irqdbf2(x...) @@ -102,7 +108,9 @@ s3c_irqsub_ack(unsigned int irqno, unsigned int parentmask, unsigned int group) #ifdef CONFIG_PM extern int s3c_irq_wake(unsigned int irqno, unsigned int state); +extern int s3c_irqext_wake(unsigned int irqno, unsigned int state); #else +#define s3c_irqext_wake NULL #define s3c_irq_wake NULL #endif diff --git a/arch/arm/plat-s3c24xx/irq-pm.c b/arch/arm/plat-s3c24xx/irq-pm.c new file mode 100644 index 00000000000..86c68804f09 --- /dev/null +++ b/arch/arm/plat-s3c24xx/irq-pm.c @@ -0,0 +1,116 @@ +/* linux/arch/arm/plat-s3c24xx/irq-om.c + * + * Copyright (c) 2003,2004 Simtec Electronics + * Ben Dooks + * http://armlinux.simtec.co.uk/ + * + * S3C24XX - IRQ PM code + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include + +#include +#include +#include + +/* state for IRQs over sleep */ + +/* default is to allow for EINT0..EINT15, and IRQ_RTC as wakeup sources + * + * set bit to 1 in allow bitfield to enable the wakeup settings on it +*/ + +unsigned long s3c_irqwake_intallow = 1L << (IRQ_RTC - IRQ_EINT0) | 0xfL; +unsigned long s3c_irqwake_intmask = 0xffffffffL; +unsigned long s3c_irqwake_eintallow = 0x0000fff0L; +unsigned long s3c_irqwake_eintmask = 0xffffffffL; + +int +s3c_irq_wake(unsigned int irqno, unsigned int state) +{ + unsigned long irqbit = 1 << (irqno - IRQ_EINT0); + + if (!(s3c_irqwake_intallow & irqbit)) + return -ENOENT; + + printk(KERN_INFO "wake %s for irq %d\n", + state ? "enabled" : "disabled", irqno); + + if (!state) + s3c_irqwake_intmask |= irqbit; + else + s3c_irqwake_intmask &= ~irqbit; + + return 0; +} + +int s3c_irqext_wake(unsigned int irqno, unsigned int state) +{ + unsigned long bit = 1L << (irqno - EXTINT_OFF); + + if (!(s3c_irqwake_eintallow & bit)) + return -ENOENT; + + printk(KERN_INFO "wake %s for irq %d\n", + state ? "enabled" : "disabled", irqno); + + if (!state) + s3c_irqwake_eintmask |= bit; + else + s3c_irqwake_eintmask &= ~bit; + + return 0; +} + +static struct sleep_save irq_save[] = { + SAVE_ITEM(S3C2410_INTMSK), + SAVE_ITEM(S3C2410_INTSUBMSK), +}; + +/* the extint values move between the s3c2410/s3c2440 and the s3c2412 + * so we use an array to hold them, and to calculate the address of + * the register at run-time +*/ + +static unsigned long save_extint[3]; +static unsigned long save_eintflt[4]; +static unsigned long save_eintmask; + +int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state) +{ + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(save_extint); i++) + save_extint[i] = __raw_readl(S3C24XX_EXTINT0 + (i*4)); + + for (i = 0; i < ARRAY_SIZE(save_eintflt); i++) + save_eintflt[i] = __raw_readl(S3C24XX_EINFLT0 + (i*4)); + + s3c_pm_do_save(irq_save, ARRAY_SIZE(irq_save)); + save_eintmask = __raw_readl(S3C24XX_EINTMASK); + + return 0; +} + +int s3c24xx_irq_resume(struct sys_device *dev) +{ + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(save_extint); i++) + __raw_writel(save_extint[i], S3C24XX_EXTINT0 + (i*4)); + + for (i = 0; i < ARRAY_SIZE(save_eintflt); i++) + __raw_writel(save_eintflt[i], S3C24XX_EINFLT0 + (i*4)); + + s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save)); + __raw_writel(save_eintmask, S3C24XX_EINTMASK); + + return 0; +} diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c index 2fa8c9f4b35..33fde662ce6 100644 --- a/arch/arm/plat-s3c24xx/irq.c +++ b/arch/arm/plat-s3c24xx/irq.c @@ -55,81 +55,16 @@ #include #include #include -#include -#include #include - #include #include -#include -#include #include #include #include -/* wakeup irq control */ - -#ifdef CONFIG_PM - -/* state for IRQs over sleep */ - -/* default is to allow for EINT0..EINT15, and IRQ_RTC as wakeup sources - * - * set bit to 1 in allow bitfield to enable the wakeup settings on it -*/ - -unsigned long s3c_irqwake_intallow = 1L << (IRQ_RTC - IRQ_EINT0) | 0xfL; -unsigned long s3c_irqwake_intmask = 0xffffffffL; -unsigned long s3c_irqwake_eintallow = 0x0000fff0L; -unsigned long s3c_irqwake_eintmask = 0xffffffffL; - -int -s3c_irq_wake(unsigned int irqno, unsigned int state) -{ - unsigned long irqbit = 1 << (irqno - IRQ_EINT0); - - if (!(s3c_irqwake_intallow & irqbit)) - return -ENOENT; - - printk(KERN_INFO "wake %s for irq %d\n", - state ? "enabled" : "disabled", irqno); - - if (!state) - s3c_irqwake_intmask |= irqbit; - else - s3c_irqwake_intmask &= ~irqbit; - - return 0; -} - -static int -s3c_irqext_wake(unsigned int irqno, unsigned int state) -{ - unsigned long bit = 1L << (irqno - EXTINT_OFF); - - if (!(s3c_irqwake_eintallow & bit)) - return -ENOENT; - - printk(KERN_INFO "wake %s for irq %d\n", - state ? "enabled" : "disabled", irqno); - - if (!state) - s3c_irqwake_eintmask |= bit; - else - s3c_irqwake_eintmask &= ~bit; - - return 0; -} - -#else -#define s3c_irqext_wake NULL -#define s3c_irq_wake NULL -#endif - - static void s3c_irq_mask(unsigned int irqno) { @@ -590,59 +525,6 @@ s3c_irq_demux_extint4t7(unsigned int irq, } } -#ifdef CONFIG_PM - -static struct sleep_save irq_save[] = { - SAVE_ITEM(S3C2410_INTMSK), - SAVE_ITEM(S3C2410_INTSUBMSK), -}; - -/* the extint values move between the s3c2410/s3c2440 and the s3c2412 - * so we use an array to hold them, and to calculate the address of - * the register at run-time -*/ - -static unsigned long save_extint[3]; -static unsigned long save_eintflt[4]; -static unsigned long save_eintmask; - -int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state) -{ - unsigned int i; - - for (i = 0; i < ARRAY_SIZE(save_extint); i++) - save_extint[i] = __raw_readl(S3C24XX_EXTINT0 + (i*4)); - - for (i = 0; i < ARRAY_SIZE(save_eintflt); i++) - save_eintflt[i] = __raw_readl(S3C24XX_EINFLT0 + (i*4)); - - s3c_pm_do_save(irq_save, ARRAY_SIZE(irq_save)); - save_eintmask = __raw_readl(S3C24XX_EINTMASK); - - return 0; -} - -int s3c24xx_irq_resume(struct sys_device *dev) -{ - unsigned int i; - - for (i = 0; i < ARRAY_SIZE(save_extint); i++) - __raw_writel(save_extint[i], S3C24XX_EXTINT0 + (i*4)); - - for (i = 0; i < ARRAY_SIZE(save_eintflt); i++) - __raw_writel(save_eintflt[i], S3C24XX_EINFLT0 + (i*4)); - - s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save)); - __raw_writel(save_eintmask, S3C24XX_EINTMASK); - - return 0; -} - -#else -#define s3c24xx_irq_suspend NULL -#define s3c24xx_irq_resume NULL -#endif - /* s3c24xx_init_irq * * Initialise S3C2410 IRQ system -- cgit v1.2.3 From 7299a40918e15d5f9b4bc7fcb02163c335d92e43 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 12 Dec 2008 00:24:11 +0000 Subject: [ARM] S3C24XX: Remove changelog from arch/arm/plat-s3c24xx/irq.c Remove the changelog, this file is in version control. Signed-off-by: Ben Dooks --- arch/arm/plat-s3c24xx/irq.c | 34 +--------------------------------- 1 file changed, 1 insertion(+), 33 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c index 33fde662ce6..958737775ad 100644 --- a/arch/arm/plat-s3c24xx/irq.c +++ b/arch/arm/plat-s3c24xx/irq.c @@ -1,6 +1,6 @@ /* linux/arch/arm/plat-s3c24xx/irq.c * - * Copyright (c) 2003,2004 Simtec Electronics + * Copyright (c) 2003,2004 Simtec Electronics * Ben Dooks * * This program is free software; you can redistribute it and/or modify @@ -16,38 +16,6 @@ * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * Changelog: - * - * 22-Jul-2004 Ben Dooks - * Fixed compile warnings - * - * 22-Jul-2004 Roc Wu - * Fixed s3c_extirq_type - * - * 21-Jul-2004 Arnaud Patard (Rtp) - * Addition of ADC/TC demux - * - * 04-Oct-2004 Klaus Fetscher - * Fix for set_irq_type() on low EINT numbers - * - * 05-Oct-2004 Ben Dooks - * Tidy up KF's patch and sort out new release - * - * 05-Oct-2004 Ben Dooks - * Add support for power management controls - * - * 04-Nov-2004 Ben Dooks - * Fix standard IRQ wake for EINT0..4 and RTC - * - * 22-Feb-2005 Ben Dooks - * Fixed edge-triggering on ADC IRQ - * - * 28-Jun-2005 Ben Dooks - * Mark IRQ_LCD valid - * - * 25-Jul-2005 Ben Dooks - * Split the S3C2440 IRQ code to separate file */ #include -- cgit v1.2.3 From 56b34426888d35b3b6367c216bbfb17b82b4f0ac Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 12 Dec 2008 00:24:12 +0000 Subject: [ARM] S3C: Make IRQ_EINT sleep control common Move the IRQ_EINT sleep control to be available to all s3c impelmentations. Since s3c_irqext_wake is not large, place it in arch/arm/plat-s3c/pm.c as adding it to a new file would be a waste of compile time. Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2410/include/mach/irqs.h | 2 +- arch/arm/mach-s3c24a0/include/mach/irqs.h | 2 ++ arch/arm/plat-s3c/include/plat/pm.h | 2 ++ arch/arm/plat-s3c/pm.c | 24 ++++++++++++++++++++++++ arch/arm/plat-s3c24xx/include/plat/irq.h | 2 -- arch/arm/plat-s3c24xx/irq-pm.c | 23 +---------------------- 6 files changed, 30 insertions(+), 25 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-s3c2410/include/mach/irqs.h b/arch/arm/mach-s3c2410/include/mach/irqs.h index 49efce8cd4a..0cd89b73577 100644 --- a/arch/arm/mach-s3c2410/include/mach/irqs.h +++ b/arch/arm/mach-s3c2410/include/mach/irqs.h @@ -80,7 +80,7 @@ #define IRQ_EINT22 S3C2410_IRQ(50) #define IRQ_EINT23 S3C2410_IRQ(51) - +#define IRQ_EINT_BIT(x) ((x) - (IRQ_EINT4 + 4)) #define IRQ_EINT(x) (((x) >= 4) ? (IRQ_EINT4 + (x) - 4) : (IRQ_EINT0 + (x))) #define IRQ_LCD_FIFO S3C2410_IRQ(52) diff --git a/arch/arm/mach-s3c24a0/include/mach/irqs.h b/arch/arm/mach-s3c24a0/include/mach/irqs.h index ae8c0e35978..83ce2a7a9da 100644 --- a/arch/arm/mach-s3c24a0/include/mach/irqs.h +++ b/arch/arm/mach-s3c24a0/include/mach/irqs.h @@ -70,6 +70,8 @@ #define IRQ_EINT17 S3C2410_IRQ(49) #define IRQ_EINT18 S3C2410_IRQ(50) +#define IRQ_EINT_BIT(x) ((x) - IRQ_EINT00) + /* SUB IRQS */ #define IRQ_S3CUART_RX0 S3C2410_IRQ(51) /* 67 */ #define IRQ_S3CUART_TX0 S3C2410_IRQ(52) diff --git a/arch/arm/plat-s3c/include/plat/pm.h b/arch/arm/plat-s3c/include/plat/pm.h index 42c75e6d2ba..5e27de955da 100644 --- a/arch/arm/plat-s3c/include/plat/pm.h +++ b/arch/arm/plat-s3c/include/plat/pm.h @@ -77,9 +77,11 @@ extern void s3c_pm_do_restore(struct sleep_save *ptr, int count); extern void s3c_pm_do_restore_core(struct sleep_save *ptr, int count); #ifdef CONFIG_PM +extern int s3c_irqext_wake(unsigned int irqno, unsigned int state); extern int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state); extern int s3c24xx_irq_resume(struct sys_device *dev); #else +#define s3c_irqext_wake NULL #define s3c24xx_irq_suspend NULL #define s3c24xx_irq_resume NULL #endif diff --git a/arch/arm/plat-s3c/pm.c b/arch/arm/plat-s3c/pm.c index fea58bea973..7c736deff8a 100644 --- a/arch/arm/plat-s3c/pm.c +++ b/arch/arm/plat-s3c/pm.c @@ -27,6 +27,7 @@ #include #include #include +#include #include #include @@ -100,6 +101,29 @@ static void s3c_pm_save_uart(void) { } static void s3c_pm_restore_uart(void) { } #endif +/* The IRQ ext-int code goes here, it is too small to currently bother + * with its own file. */ + +unsigned long s3c_irqwake_intmask = 0xffffffffL; +unsigned long s3c_irqwake_eintmask = 0xffffffffL; + +int s3c_irqext_wake(unsigned int irqno, unsigned int state) +{ + unsigned long bit = 1L << IRQ_EINT_BIT(irqno); + + if (!(s3c_irqwake_eintallow & bit)) + return -ENOENT; + + printk(KERN_INFO "wake %s for irq %d\n", + state ? "enabled" : "disabled", irqno); + + if (!state) + s3c_irqwake_eintmask |= bit; + else + s3c_irqwake_eintmask &= ~bit; + + return 0; +} /* helper functions to save and restore register state */ diff --git a/arch/arm/plat-s3c24xx/include/plat/irq.h b/arch/arm/plat-s3c24xx/include/plat/irq.h index 97b6884ea0d..69e1be8bec3 100644 --- a/arch/arm/plat-s3c24xx/include/plat/irq.h +++ b/arch/arm/plat-s3c24xx/include/plat/irq.h @@ -108,9 +108,7 @@ s3c_irqsub_ack(unsigned int irqno, unsigned int parentmask, unsigned int group) #ifdef CONFIG_PM extern int s3c_irq_wake(unsigned int irqno, unsigned int state); -extern int s3c_irqext_wake(unsigned int irqno, unsigned int state); #else -#define s3c_irqext_wake NULL #define s3c_irq_wake NULL #endif diff --git a/arch/arm/plat-s3c24xx/irq-pm.c b/arch/arm/plat-s3c24xx/irq-pm.c index 86c68804f09..b7acf1a8ecd 100644 --- a/arch/arm/plat-s3c24xx/irq-pm.c +++ b/arch/arm/plat-s3c24xx/irq-pm.c @@ -28,12 +28,9 @@ */ unsigned long s3c_irqwake_intallow = 1L << (IRQ_RTC - IRQ_EINT0) | 0xfL; -unsigned long s3c_irqwake_intmask = 0xffffffffL; unsigned long s3c_irqwake_eintallow = 0x0000fff0L; -unsigned long s3c_irqwake_eintmask = 0xffffffffL; -int -s3c_irq_wake(unsigned int irqno, unsigned int state) +int s3c_irq_wake(unsigned int irqno, unsigned int state) { unsigned long irqbit = 1 << (irqno - IRQ_EINT0); @@ -51,24 +48,6 @@ s3c_irq_wake(unsigned int irqno, unsigned int state) return 0; } -int s3c_irqext_wake(unsigned int irqno, unsigned int state) -{ - unsigned long bit = 1L << (irqno - EXTINT_OFF); - - if (!(s3c_irqwake_eintallow & bit)) - return -ENOENT; - - printk(KERN_INFO "wake %s for irq %d\n", - state ? "enabled" : "disabled", irqno); - - if (!state) - s3c_irqwake_eintmask |= bit; - else - s3c_irqwake_eintmask &= ~bit; - - return 0; -} - static struct sleep_save irq_save[] = { SAVE_ITEM(S3C2410_INTMSK), SAVE_ITEM(S3C2410_INTSUBMSK), -- cgit v1.2.3 From 598ee00207a561572e011c49e39144a321ef3979 Mon Sep 17 00:00:00 2001 From: Andy Green Date: Fri, 12 Dec 2008 00:24:13 +0000 Subject: [ARM] S3C24XX: Fix bug in IRQ_EINT_BIT() calculation There's a bug in calculation of IRQ_EINT_BIT introduced on the test branch for pm changes for s3c by Ben Dooks fixed in this patch. There's also a bit of a mystery about how wake gets to wake EINT set of interrupts, I added a couple of lines that make it work for EINT4+ but not sure what's meant to be there for EINT0-3. Still, this gets GTA02 resume working again. Signed-off-by: Andy Green [ben-linux@fluff.org: remove irq-pm.c change] Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2410/include/mach/irqs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-s3c2410/include/mach/irqs.h b/arch/arm/mach-s3c2410/include/mach/irqs.h index 0cd89b73577..2a2384ffa7b 100644 --- a/arch/arm/mach-s3c2410/include/mach/irqs.h +++ b/arch/arm/mach-s3c2410/include/mach/irqs.h @@ -80,7 +80,7 @@ #define IRQ_EINT22 S3C2410_IRQ(50) #define IRQ_EINT23 S3C2410_IRQ(51) -#define IRQ_EINT_BIT(x) ((x) - (IRQ_EINT4 + 4)) +#define IRQ_EINT_BIT(x) ((x) - IRQ_EINT4 + 4) #define IRQ_EINT(x) (((x) >= 4) ? (IRQ_EINT4 + (x) - 4) : (IRQ_EINT0 + (x))) #define IRQ_LCD_FIFO S3C2410_IRQ(52) -- cgit v1.2.3 From 4e59c25dcbc1f033d043f1009a7f6aaa1f2aef26 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 12 Dec 2008 00:24:18 +0000 Subject: [ARM] S3C: Rename s3c2410_pm_init to s3c_pm_init. Since we have moved a large proportion of the PM code to the common support area, remove the cpu specific name from the initialisation function. Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2410/mach-h1940.c | 2 +- arch/arm/mach-s3c2410/mach-qt2410.c | 2 +- arch/arm/mach-s3c2412/mach-jive.c | 2 +- arch/arm/mach-s3c2440/mach-rx3715.c | 2 +- arch/arm/plat-s3c/include/plat/pm.h | 6 +++--- arch/arm/plat-s3c/pm.c | 4 ++-- arch/arm/plat-s3c24xx/common-smdk.c | 2 +- arch/arm/plat-s3c24xx/pm-simtec.c | 2 +- 8 files changed, 11 insertions(+), 11 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c index 821a1668c3a..7a7c4da4c25 100644 --- a/arch/arm/mach-s3c2410/mach-h1940.c +++ b/arch/arm/mach-s3c2410/mach-h1940.c @@ -203,7 +203,7 @@ static void __init h1940_map_io(void) #ifdef CONFIG_PM_H1940 memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024); #endif - s3c2410_pm_init(); + s3c_pm_init(); } static void __init h1940_init_irq(void) diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c index 9678a53ceeb..9f1ba9b63f7 100644 --- a/arch/arm/mach-s3c2410/mach-qt2410.c +++ b/arch/arm/mach-s3c2410/mach-qt2410.c @@ -355,7 +355,7 @@ static void __init qt2410_machine_init(void) s3c2410_gpio_cfgpin(S3C2410_GPB5, S3C2410_GPIO_OUTPUT); platform_add_devices(qt2410_devices, ARRAY_SIZE(qt2410_devices)); - s3c2410_pm_init(); + s3c_pm_init(); } MACHINE_START(QT2410, "QT2410") diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c index ecddbbb3483..50d8054292c 100644 --- a/arch/arm/mach-s3c2412/mach-jive.c +++ b/arch/arm/mach-s3c2412/mach-jive.c @@ -630,7 +630,7 @@ static void __init jive_machine_init(void) /* initialise the power management now we've setup everything. */ - s3c2410_pm_init(); + s3c_pm_init(); s3c_device_nand.dev.platform_data = &jive_nand_info; diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c index 12d378f84ad..bc8d8d1ebd1 100644 --- a/arch/arm/mach-s3c2440/mach-rx3715.c +++ b/arch/arm/mach-s3c2440/mach-rx3715.c @@ -203,7 +203,7 @@ static void __init rx3715_init_machine(void) #ifdef CONFIG_PM_H1940 memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024); #endif - s3c2410_pm_init(); + s3c_pm_init(); s3c24xx_fb_set_platdata(&rx3715_fb_info); platform_add_devices(rx3715_devices, ARRAY_SIZE(rx3715_devices)); diff --git a/arch/arm/plat-s3c/include/plat/pm.h b/arch/arm/plat-s3c/include/plat/pm.h index 5e27de955da..a6104c8055f 100644 --- a/arch/arm/plat-s3c/include/plat/pm.h +++ b/arch/arm/plat-s3c/include/plat/pm.h @@ -9,7 +9,7 @@ * published by the Free Software Foundation. */ -/* s3c2410_pm_init +/* s3c_pm_init * * called from board at initialisation time to setup the power * management @@ -17,11 +17,11 @@ #ifdef CONFIG_PM -extern __init int s3c2410_pm_init(void); +extern __init int s3c_pm_init(void); #else -static inline int s3c2410_pm_init(void) +static inline int s3c_pm_init(void) { return 0; } diff --git a/arch/arm/plat-s3c/pm.c b/arch/arm/plat-s3c/pm.c index 7c736deff8a..e82ec628ced 100644 --- a/arch/arm/plat-s3c/pm.c +++ b/arch/arm/plat-s3c/pm.c @@ -316,14 +316,14 @@ static struct platform_suspend_ops s3c_pm_ops = { .valid = suspend_valid_only_mem, }; -/* s3c2410_pm_init +/* s3c_pm_init * * Attach the power management functions. This should be called * from the board specific initialisation if the board supports * it. */ -int __init s3c2410_pm_init(void) +int __init s3c_pm_init(void) { printk("S3C Power Management, Copyright 2004 Simtec Electronics\n"); diff --git a/arch/arm/plat-s3c24xx/common-smdk.c b/arch/arm/plat-s3c24xx/common-smdk.c index 3d4837021ac..1a8347cec20 100644 --- a/arch/arm/plat-s3c24xx/common-smdk.c +++ b/arch/arm/plat-s3c24xx/common-smdk.c @@ -201,5 +201,5 @@ void __init smdk_machine_init(void) platform_add_devices(smdk_devs, ARRAY_SIZE(smdk_devs)); - s3c2410_pm_init(); + s3c_pm_init(); } diff --git a/arch/arm/plat-s3c24xx/pm-simtec.c b/arch/arm/plat-s3c24xx/pm-simtec.c index 21dfa74773d..da0d3217d3e 100644 --- a/arch/arm/plat-s3c24xx/pm-simtec.c +++ b/arch/arm/plat-s3c24xx/pm-simtec.c @@ -61,7 +61,7 @@ static __init int pm_simtec_init(void) __raw_writel(gstatus4, S3C2410_GSTATUS4); - return s3c2410_pm_init(); + return s3c_pm_init(); } arch_initcall(pm_simtec_init); -- cgit v1.2.3 From ef30e14420df546bc6576b00f9caf3379b6699d1 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 12 Dec 2008 00:24:19 +0000 Subject: [ARM] S3C: Rename sleep.S functions to be non-cpu specific Rename s3c2410_cpu_resume to s3c_cpu_resume and s3c2410_cpu_save to s3c_cpu_save to remove the CPU specific naming of these functions which are now in the generic PM code. Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2410/pm.c | 2 +- arch/arm/mach-s3c2412/mach-jive.c | 2 +- arch/arm/plat-s3c/include/plat/pm.h | 5 +++-- arch/arm/plat-s3c/pm.c | 3 ++- arch/arm/plat-s3c24xx/sleep.S | 10 +++++----- 5 files changed, 12 insertions(+), 10 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/mach-s3c2410/pm.c b/arch/arm/mach-s3c2410/pm.c index 72f96869aa9..87fc481d92d 100644 --- a/arch/arm/mach-s3c2410/pm.c +++ b/arch/arm/mach-s3c2410/pm.c @@ -41,7 +41,7 @@ static void s3c2410_pm_prepare(void) { /* ensure at least GSTATUS3 has the resume address */ - __raw_writel(virt_to_phys(s3c2410_cpu_resume), S3C2410_GSTATUS3); + __raw_writel(virt_to_phys(s3c_cpu_resume), S3C2410_GSTATUS3); S3C_PMDBG("GSTATUS3 0x%08x\n", __raw_readl(S3C2410_GSTATUS3)); S3C_PMDBG("GSTATUS4 0x%08x\n", __raw_readl(S3C2410_GSTATUS4)); diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c index 50d8054292c..72c266aee14 100644 --- a/arch/arm/mach-s3c2412/mach-jive.c +++ b/arch/arm/mach-s3c2412/mach-jive.c @@ -494,7 +494,7 @@ static int jive_pm_suspend(struct sys_device *sd, pm_message_t state) * correct address to resume from. */ __raw_writel(0x2BED, S3C2412_INFORM0); - __raw_writel(virt_to_phys(s3c2410_cpu_resume), S3C2412_INFORM1); + __raw_writel(virt_to_phys(s3c_cpu_resume), S3C2412_INFORM1); return 0; } diff --git a/arch/arm/plat-s3c/include/plat/pm.h b/arch/arm/plat-s3c/include/plat/pm.h index a6104c8055f..f121a5ac742 100644 --- a/arch/arm/plat-s3c/include/plat/pm.h +++ b/arch/arm/plat-s3c/include/plat/pm.h @@ -46,9 +46,10 @@ extern unsigned long s3c_pm_flags; /* from sleep.S */ -extern int s3c2410_cpu_save(unsigned long *saveblk); +extern int s3c_cpu_save(unsigned long *saveblk); +extern void s3c_cpu_resume(void); + extern void s3c2410_cpu_suspend(void); -extern void s3c2410_cpu_resume(void); extern unsigned long s3c_sleep_save_phys; diff --git a/arch/arm/plat-s3c/pm.c b/arch/arm/plat-s3c/pm.c index e82ec628ced..e320b0ff385 100644 --- a/arch/arm/plat-s3c/pm.c +++ b/arch/arm/plat-s3c/pm.c @@ -280,8 +280,9 @@ static int s3c_pm_enter(suspend_state_t state) * we resume as it saves its own register state, so use the return * code to differentiate return from save and return from sleep */ - if (s3c2410_cpu_save(regs_save) == 0) { + if (s3c_cpu_save(regs_save) == 0) { flush_cache_all(); + S3C_PMDBG("preparing to sleep\n"); pm_cpu_sleep(); } diff --git a/arch/arm/plat-s3c24xx/sleep.S b/arch/arm/plat-s3c24xx/sleep.S index 7c1955ff317..ecb830be67d 100644 --- a/arch/arm/plat-s3c24xx/sleep.S +++ b/arch/arm/plat-s3c24xx/sleep.S @@ -41,7 +41,7 @@ .text - /* s3c2410_cpu_save + /* s3c_cpu_save * * save enough of the CPU state to allow us to re-start * pm.c code. as we store items like the sp/lr, we will @@ -59,7 +59,7 @@ * 1 => resumed from sleep */ -ENTRY(s3c2410_cpu_save) +ENTRY(s3c_cpu_save) stmfd sp!, { r4 - r12, lr } @@ store co-processor registers @@ -99,12 +99,12 @@ s3c_sleep_save_phys: /* sleep magic, to allow the bootloader to check for an valid * image to resume to. Must be the first word before the - * s3c2410_cpu_resume entry. + * s3c_cpu_resume entry. */ .word 0x2bedf00d - /* s3c2410_cpu_resume + /* s3c_cpu_resume * * resume code entry for bootloader to call * @@ -113,7 +113,7 @@ s3c_sleep_save_phys: * must not write to the code segment (code is read-only) */ -ENTRY(s3c2410_cpu_resume) +ENTRY(s3c_cpu_resume) mov r0, #PSR_I_BIT | PSR_F_BIT | SVC_MODE msr cpsr_c, r0 -- cgit v1.2.3 From d2b07fe2a3e35d8e58cceb63ab58831d706da939 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 12 Dec 2008 00:24:20 +0000 Subject: [ARM] S3C: Update UART save over PM suspend/resume Change the way the UART state is saved over suspend to allow the s3c64xx code to modify the settings on resume to avoid any illegal state changes to the UART clocks. This will also allow us to save the UDIVSLOT register on newer SoCs. Move to using a structure for the UART use the extant Kconfig configuration specifying the number of UARTs. Signed-off-by: Ben Dooks --- arch/arm/plat-s3c/include/plat/pm.h | 19 ++++++++++ arch/arm/plat-s3c/pm.c | 61 ++++++++++++++++++++------------ arch/arm/plat-s3c24xx/include/plat/map.h | 2 ++ 3 files changed, 60 insertions(+), 22 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/plat-s3c/include/plat/pm.h b/arch/arm/plat-s3c/include/plat/pm.h index f121a5ac742..c27b8cf5d89 100644 --- a/arch/arm/plat-s3c/include/plat/pm.h +++ b/arch/arm/plat-s3c/include/plat/pm.h @@ -71,6 +71,25 @@ struct sleep_save { #define SAVE_ITEM(x) \ { .reg = (x) } +/** + * struct pm_uart_save - save block for core UART + * @ulcon: Save value for S3C2410_ULCON + * @ucon: Save value for S3C2410_UCON + * @ufcon: Save value for S3C2410_UFCON + * @umcon: Save value for S3C2410_UMCON + * @ubrdiv: Save value for S3C2410_UBRDIV + * + * Save block for UART registers to be held over sleep and restored if they + * are needed (say by debug). +*/ +struct pm_uart_save { + u32 ulcon; + u32 ucon; + u32 ufcon; + u32 umcon; + u32 ubrdiv; +}; + /* helper functions to save/restore lists of registers. */ extern void s3c_pm_do_save(struct sleep_save *ptr, int count); diff --git a/arch/arm/plat-s3c/pm.c b/arch/arm/plat-s3c/pm.c index e320b0ff385..78bf50a1402 100644 --- a/arch/arm/plat-s3c/pm.c +++ b/arch/arm/plat-s3c/pm.c @@ -72,33 +72,50 @@ static inline void s3c_pm_debug_init(void) #ifdef CONFIG_S3C2410_PM_DEBUG -#define SAVE_UART(va) \ - SAVE_ITEM((va) + S3C2410_ULCON), \ - SAVE_ITEM((va) + S3C2410_UCON), \ - SAVE_ITEM((va) + S3C2410_UFCON), \ - SAVE_ITEM((va) + S3C2410_UMCON), \ - SAVE_ITEM((va) + S3C2410_UBRDIV) - -static struct sleep_save uart_save[] = { - SAVE_UART(S3C_VA_UART0), - SAVE_UART(S3C_VA_UART1), -#ifndef CONFIG_CPU_S3C2400 - SAVE_UART(S3C_VA_UART2), -#endif -}; +struct pm_uart_save uart_save[CONFIG_SERIAL_SAMSUNG_UARTS]; + +static void s3c_pm_save_uart(unsigned int uart, struct pm_uart_save *save) +{ + void __iomem *regs = S3C_VA_UARTx(uart); + + save->ulcon = __raw_readl(regs + S3C2410_ULCON); + save->ucon = __raw_readl(regs + S3C2410_UCON); + save->ufcon = __raw_readl(regs + S3C2410_UFCON); + save->umcon = __raw_readl(regs + S3C2410_UMCON); + save->ubrdiv = __raw_readl(regs + S3C2410_UBRDIV); +} -static void s3c_pm_save_uart(void) +static void s3c_pm_save_uarts(void) { - s3c_pm_do_save(uart_save, ARRAY_SIZE(uart_save)); + struct pm_uart_save *save = uart_save; + unsigned int uart; + + for (uart = 0; uart < CONFIG_SERIAL_SAMSUNG_UARTS; uart++, save++) + s3c_pm_save_uart(uart, save); +} + +static void s3c_pm_restore_uart(unsigned int uart, struct pm_uart_save *save) +{ + void __iomem *regs = S3C_VA_UARTx(uart); + + __raw_writel(save->ulcon, regs + S3C2410_ULCON); + __raw_writel(save->ucon, regs + S3C2410_UCON); + __raw_writel(save->ufcon, regs + S3C2410_UFCON); + __raw_writel(save->umcon, regs + S3C2410_UMCON); + __raw_writel(save->ubrdiv, regs + S3C2410_UBRDIV); } -static void s3c_pm_restore_uart(void) +static void s3c_pm_restore_uarts(void) { - s3c_pm_do_restore(uart_save, ARRAY_SIZE(uart_save)); + struct pm_uart_save *save = uart_save; + unsigned int uart; + + for (uart = 0; uart < CONFIG_SERIAL_SAMSUNG_UARTS; uart++, save++) + s3c_pm_restore_uart(uart, save); } #else -static void s3c_pm_save_uart(void) { } -static void s3c_pm_restore_uart(void) { } +static void s3c_pm_save_uarts(void) { } +static void s3c_pm_restore_uarts(void) { } #endif /* The IRQ ext-int code goes here, it is too small to currently bother @@ -250,7 +267,7 @@ static int s3c_pm_enter(suspend_state_t state) /* save all necessary core registers not covered by the drivers */ s3c_pm_save_gpios(); - s3c_pm_save_uart(); + s3c_pm_save_uarts(); s3c_pm_save_core(); /* set the irq configuration for wake */ @@ -293,7 +310,7 @@ static int s3c_pm_enter(suspend_state_t state) /* restore the system state */ s3c_pm_restore_core(); - s3c_pm_restore_uart(); + s3c_pm_restore_uarts(); s3c_pm_restore_gpios(); s3c_pm_debug_init(); diff --git a/arch/arm/plat-s3c24xx/include/plat/map.h b/arch/arm/plat-s3c24xx/include/plat/map.h index fef8ea8b8e1..eed8f78e759 100644 --- a/arch/arm/plat-s3c24xx/include/plat/map.h +++ b/arch/arm/plat-s3c24xx/include/plat/map.h @@ -31,6 +31,8 @@ #define S3C24XX_SZ_UART SZ_1M #define S3C_UART_OFFSET (0x4000) +#define S3C_VA_UARTx(uart) (S3C_VA_UART + ((uart * S3C_UART_OFFSET))) + /* Timers */ #define S3C24XX_VA_TIMER S3C_VA_TIMER #define S3C2410_PA_TIMER (0x51000000) -- cgit v1.2.3 From 67c2addcb08df4827fbb7af88b57cce2ba71e34b Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 12 Dec 2008 00:24:29 +0000 Subject: [ARM] S3C24XX: Add S3C_GPIO_END definition Add the definition for S3C_GPIO_END to allow the PM code to build. This means moving the GPIO bank numbers to a separate file to allow the gpio and regs-gpio to include them. Including regs-gpio.h into gpio.h causes too many build problems and adding gpio.h would mean editing a large number of files. Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2410/include/mach/gpio-nrs.h | 23 +++++++++++++++++++++++ arch/arm/mach-s3c2410/include/mach/gpio.h | 3 +++ arch/arm/mach-s3c2410/include/mach/regs-gpio.h | 11 +---------- 3 files changed, 27 insertions(+), 10 deletions(-) create mode 100644 arch/arm/mach-s3c2410/include/mach/gpio-nrs.h (limited to 'arch/arm') diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h b/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h new file mode 100644 index 00000000000..ce1ec69806a --- /dev/null +++ b/arch/arm/mach-s3c2410/include/mach/gpio-nrs.h @@ -0,0 +1,23 @@ +/* arch/arm/mach-s3c2410/include/mach/gpio-nrs.h + * + * Copyright (c) 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks + * + * S3C2410 - GPIO bank numbering + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#define S3C2410_GPIONO(bank,offset) ((bank) + (offset)) + +#define S3C2410_GPIO_BANKA (32*0) +#define S3C2410_GPIO_BANKB (32*1) +#define S3C2410_GPIO_BANKC (32*2) +#define S3C2410_GPIO_BANKD (32*3) +#define S3C2410_GPIO_BANKE (32*4) +#define S3C2410_GPIO_BANKF (32*5) +#define S3C2410_GPIO_BANKG (32*6) +#define S3C2410_GPIO_BANKH (32*7) diff --git a/arch/arm/mach-s3c2410/include/mach/gpio.h b/arch/arm/mach-s3c2410/include/mach/gpio.h index 00476a573bb..51a88cf9526 100644 --- a/arch/arm/mach-s3c2410/include/mach/gpio.h +++ b/arch/arm/mach-s3c2410/include/mach/gpio.h @@ -23,3 +23,6 @@ #define ARCH_NR_GPIOS (256 + CONFIG_S3C24XX_GPIO_EXTRA) #include +#include + +#define S3C_GPIO_END (S3C2410_GPIO_BANKH + 32) diff --git a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h index 32107761306..35a03df473f 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h +++ b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h @@ -14,16 +14,7 @@ #ifndef __ASM_ARCH_REGS_GPIO_H #define __ASM_ARCH_REGS_GPIO_H -#define S3C2410_GPIONO(bank,offset) ((bank) + (offset)) - -#define S3C2410_GPIO_BANKA (32*0) -#define S3C2410_GPIO_BANKB (32*1) -#define S3C2410_GPIO_BANKC (32*2) -#define S3C2410_GPIO_BANKD (32*3) -#define S3C2410_GPIO_BANKE (32*4) -#define S3C2410_GPIO_BANKF (32*5) -#define S3C2410_GPIO_BANKG (32*6) -#define S3C2410_GPIO_BANKH (32*7) +#include #ifdef CONFIG_CPU_S3C2400 #define S3C24XX_GPIO_BASE(x) S3C2400_GPIO_BASE(x) -- cgit v1.2.3 From 663a83048c602d5176c23489b4e29598d753e42b Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 12 Dec 2008 00:24:36 +0000 Subject: [ARM] S3C: Avoid checking the task stackpage in pm-check When doing the CRC check of the memory, avoid checking the page that our stack is residing in as this changes during the execution of the suspend and resume. Signed-off-by: Ben Dooks --- arch/arm/plat-s3c/pm-check.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) (limited to 'arch/arm') diff --git a/arch/arm/plat-s3c/pm-check.c b/arch/arm/plat-s3c/pm-check.c index b221470e3bf..183f1304bf5 100644 --- a/arch/arm/plat-s3c/pm-check.c +++ b/arch/arm/plat-s3c/pm-check.c @@ -152,7 +152,7 @@ static inline int in_region(void *ptr, int size, void *what, size_t whatsz) } /** - * s3c_pm_runcheck*() - helper to check a resource on restore. + * s3c_pm_runcheck() - helper to check a resource on restore. * @res: The resource to check * @vak: Pointer to list of CRC32 values to check. * @@ -166,9 +166,12 @@ static u32 *s3c_pm_runcheck(struct resource *res, u32 *val) void *save_at = phys_to_virt(s3c_sleep_save_phys); unsigned long addr; unsigned long left; + void *stkpage; void *ptr; u32 calc; + stkpage = (void *)((u32)&calc & ~PAGE_MASK); + for (addr = res->start; addr < res->end; addr += CHECK_CHUNKSIZE) { left = res->end - addr; @@ -178,6 +181,11 @@ static u32 *s3c_pm_runcheck(struct resource *res, u32 *val) ptr = phys_to_virt(addr); + if (in_region(ptr, left, stkpage, 4096)) { + S3C_PMDBG("skipping %08lx, has stack in\n", addr); + goto skip_check; + } + if (in_region(ptr, left, crcs, crc_size)) { S3C_PMDBG("skipping %08lx, has crc block in\n", addr); goto skip_check; -- cgit v1.2.3 From aa8aba6944203a17a7e941b42d8415153c649660 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 12 Dec 2008 00:24:34 +0000 Subject: [ARM] S3C: Do not kmalloc/kfree during inner suspend code. The PM CRC checking code kmallocs an area to save a set of CRC values during suspend. This triggers a warning due to the call of a function that might sleep whilst the system is not in a valid state to do so. Move the allocation and free to points in the suspend and resume process where they can call a function that might-sleep. Signed-off-by: Ben Dooks --- arch/arm/plat-s3c/include/plat/pm.h | 2 ++ arch/arm/plat-s3c/pm-check.c | 20 ++++++++++++++++---- arch/arm/plat-s3c/pm.c | 19 +++++++++++++++---- 3 files changed, 33 insertions(+), 8 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/plat-s3c/include/plat/pm.h b/arch/arm/plat-s3c/include/plat/pm.h index c27b8cf5d89..5ee26da2702 100644 --- a/arch/arm/plat-s3c/include/plat/pm.h +++ b/arch/arm/plat-s3c/include/plat/pm.h @@ -129,10 +129,12 @@ extern void s3c_pm_dbg(const char *msg, ...); #ifdef CONFIG_S3C2410_PM_CHECK extern void s3c_pm_check_prepare(void); extern void s3c_pm_check_restore(void); +extern void s3c_pm_check_cleanup(void); extern void s3c_pm_check_store(void); #else #define s3c_pm_check_prepare() do { } while(0) #define s3c_pm_check_restore() do { } while(0) +#define s3c_pm_check_cleanup() do { } while(0) #define s3c_pm_check_store() do { } while(0) #endif diff --git a/arch/arm/plat-s3c/pm-check.c b/arch/arm/plat-s3c/pm-check.c index 183f1304bf5..39f2555564d 100644 --- a/arch/arm/plat-s3c/pm-check.c +++ b/arch/arm/plat-s3c/pm-check.c @@ -222,9 +222,21 @@ static u32 *s3c_pm_runcheck(struct resource *res, u32 *val) */ void s3c_pm_check_restore(void) { - if (crcs != NULL) { + if (crcs != NULL) s3c_pm_run_sysram(s3c_pm_runcheck, crcs); - kfree(crcs); - crcs = NULL; - } } + +/** + * s3c_pm_check_cleanup() - free memory resources + * + * Free the resources that where allocated by the suspend + * memory check code. We do this separately from the + * s3c_pm_check_restore() function as we cannot call any + * functions that might sleep during that resume. + */ +void s3c_pm_check_cleanup(void) +{ + kfree(crcs); + crcs = NULL; +} + diff --git a/arch/arm/plat-s3c/pm.c b/arch/arm/plat-s3c/pm.c index 78bf50a1402..a0ca18a75b0 100644 --- a/arch/arm/plat-s3c/pm.c +++ b/arch/arm/plat-s3c/pm.c @@ -254,10 +254,6 @@ static int s3c_pm_enter(suspend_state_t state) return -EINVAL; } - /* prepare check area if configured */ - - s3c_pm_check_prepare(); - /* store the physical address of the register recovery block */ s3c_sleep_save_phys = virt_to_phys(regs_save); @@ -329,8 +325,23 @@ static int s3c_pm_enter(suspend_state_t state) return 0; } +static int s3c_pm_prepare(void) +{ + /* prepare check area if configured */ + + s3c_pm_check_prepare(); + return 0; +} + +static void s3c_pm_finish(void) +{ + s3c_pm_check_cleanup(); +} + static struct platform_suspend_ops s3c_pm_ops = { .enter = s3c_pm_enter, + .prepare = s3c_pm_prepare, + .finish = s3c_pm_finish, .valid = suspend_valid_only_mem, }; -- cgit v1.2.3 From fff94cd9f5527bbba13aa5ea5719d16531ca8e65 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 10 Mar 2009 11:48:07 +0000 Subject: [ARM] S3C: Tidy sleep code path to fix call flow As noted by Russell King, the sleep code path is not elegant and makes use of leaving items on the stack between calls. Change the code that does the following: if (s3c_cpu_save(regs_save) == 0) { flush_cache_all(); S3C_PMDBG("preparing to sleep\n"); pm_cpu_sleep(); } to simply call s3c_cpu_save, and let that do the necessary calls to quiesce and sleep the system. Signed-off-by: Ben Dooks --- arch/arm/plat-s3c/include/plat/pm.h | 8 ++++++++ arch/arm/plat-s3c/pm.c | 20 +++++++++++--------- arch/arm/plat-s3c24xx/sleep.S | 25 +++++++++---------------- 3 files changed, 28 insertions(+), 25 deletions(-) (limited to 'arch/arm') diff --git a/arch/arm/plat-s3c/include/plat/pm.h b/arch/arm/plat-s3c/include/plat/pm.h index 5ee26da2702..3779775133a 100644 --- a/arch/arm/plat-s3c/include/plat/pm.h +++ b/arch/arm/plat-s3c/include/plat/pm.h @@ -162,5 +162,13 @@ extern void s3c_pm_restore_gpios(void); */ extern void s3c_pm_save_gpios(void); +/** + * s3c_pm_cb_flushcache - callback for assembly code + * + * Callback to issue flush_cache_all() as this call is + * not a directly callable object. + */ +extern void s3c_pm_cb_flushcache(void); + extern void s3c_pm_save_core(void); extern void s3c_pm_restore_core(void); diff --git a/arch/arm/plat-s3c/pm.c b/arch/arm/plat-s3c/pm.c index a0ca18a75b0..061182ca66e 100644 --- a/arch/arm/plat-s3c/pm.c +++ b/arch/arm/plat-s3c/pm.c @@ -229,7 +229,7 @@ void (*pm_cpu_sleep)(void); static int s3c_pm_enter(suspend_state_t state) { - unsigned long regs_save[16]; + static unsigned long regs_save[16]; /* ensure the debug is initialised (if enabled) */ @@ -289,15 +289,11 @@ static int s3c_pm_enter(suspend_state_t state) s3c_pm_arch_stop_clocks(); - /* s3c2410_cpu_save will also act as our return point from when - * we resume as it saves its own register state, so use the return - * code to differentiate return from save and return from sleep */ + /* s3c_cpu_save will also act as our return point from when + * we resume as it saves its own register state and restores it + * during the resume. */ - if (s3c_cpu_save(regs_save) == 0) { - flush_cache_all(); - S3C_PMDBG("preparing to sleep\n"); - pm_cpu_sleep(); - } + s3c_cpu_save(regs_save); /* restore the cpu state using the kernel's cpu init code. */ @@ -325,6 +321,12 @@ static int s3c_pm_enter(suspend_state_t state) return 0; } +/* callback from assembly code */ +void s3c_pm_cb_flushcache(void) +{ + flush_cache_all(); +} + static int s3c_pm_prepare(void) { /* prepare check area if configured */ diff --git a/arch/arm/plat-s3c24xx/sleep.S b/arch/arm/plat-s3c24xx/sleep.S index ecb830be67d..e73e3b6e88d 100644 --- a/arch/arm/plat-s3c24xx/sleep.S +++ b/arch/arm/plat-s3c24xx/sleep.S @@ -42,21 +42,9 @@ .text /* s3c_cpu_save - * - * save enough of the CPU state to allow us to re-start - * pm.c code. as we store items like the sp/lr, we will - * end up returning from this function when the cpu resumes - * so the return value is set to mark this. - * - * This arangement means we avoid having to flush the cache - * from this code. * * entry: - * r0 = pointer to save block - * - * exit: - * r0 = 0 => we stored everything - * 1 => resumed from sleep + * r0 = save address (virtual addr of s3c_sleep_save_phys) */ ENTRY(s3c_cpu_save) @@ -71,14 +59,19 @@ ENTRY(s3c_cpu_save) stmia r0, { r4 - r13 } - mov r0, #0 - ldmfd sp, { r4 - r12, pc } + @@ write our state back to RAM + bl s3c_pm_cb_flushcache + @@ jump to final code to send system to sleep + ldr r0, =pm_cpu_sleep + @@ldr pc, [ r0 ] + ldr r0, [ r0 ] + mov pc, r0 + @@ return to the caller, after having the MMU @@ turned on, this restores the last bits from the @@ stack resume_with_mmu: - mov r0, #1 ldmfd sp!, { r4 - r12, pc } .ltorg -- cgit v1.2.3