From e4ac58afdfac792c0583af30dbd9eae53e24c78b Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 3 Apr 2006 17:56:36 +0100 Subject: [MIPS] Rewrite all the assembler interrupt handlers to C. Saves like 1,600 lines of code, is way easier to debug, compilers frequently do a better job than the cut and paste type of handlers many boards had. And finally having all the stuff done in a single place also means alot of bug potencial for the MT ASE is gone. The only surviving handler in assembler is the DECstation one; I hope Maciej will rewrite it. Signed-off-by: Ralf Baechle --- arch/mips/gt64120/momenco_ocelot/Makefile | 2 +- arch/mips/gt64120/momenco_ocelot/int-handler.S | 131 ------------------------- arch/mips/gt64120/momenco_ocelot/irq.c | 36 ++++++- 3 files changed, 33 insertions(+), 136 deletions(-) delete mode 100644 arch/mips/gt64120/momenco_ocelot/int-handler.S (limited to 'arch/mips/gt64120/momenco_ocelot') diff --git a/arch/mips/gt64120/momenco_ocelot/Makefile b/arch/mips/gt64120/momenco_ocelot/Makefile index 7b59c6567c7..6f708df8373 100644 --- a/arch/mips/gt64120/momenco_ocelot/Makefile +++ b/arch/mips/gt64120/momenco_ocelot/Makefile @@ -2,7 +2,7 @@ # Makefile for Momentum's Ocelot board. # -obj-y += int-handler.o irq.o prom.o reset.o setup.o +obj-y += irq.o prom.o reset.o setup.o obj-$(CONFIG_KGDB) += dbg_io.o diff --git a/arch/mips/gt64120/momenco_ocelot/int-handler.S b/arch/mips/gt64120/momenco_ocelot/int-handler.S deleted file mode 100644 index 808acef248c..00000000000 --- a/arch/mips/gt64120/momenco_ocelot/int-handler.S +++ /dev/null @@ -1,131 +0,0 @@ -/* - * Copyright 2001 MontaVista Software Inc. - * Author: jsun@mvista.com or jsun@junsun.net - * - * First-level interrupt dispatcher for ocelot board. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#include -#include -#include -#include -#include - -/* - * first level interrupt dispatcher for ocelot board - - * We check for the timer first, then check PCI ints A and D. - * Then check for serial IRQ and fall through. - */ - .align 5 - NESTED(ocelot_handle_int, PT_SIZE, sp) - SAVE_ALL - CLI - .set at - mfc0 t0, CP0_CAUSE - mfc0 t2, CP0_STATUS - - and t0, t2 - - andi t1, t0, STATUSF_IP2 /* int0 hardware line */ - bnez t1, ll_pri_enet_irq - andi t1, t0, STATUSF_IP3 /* int1 hardware line */ - bnez t1, ll_sec_enet_irq - andi t1, t0, STATUSF_IP4 /* int2 hardware line */ - bnez t1, ll_uart1_irq - andi t1, t0, STATUSF_IP5 /* int3 hardware line */ - bnez t1, ll_cpci_irq - andi t1, t0, STATUSF_IP6 /* int4 hardware line */ - bnez t1, ll_galileo_irq - andi t1, t0, STATUSF_IP7 /* cpu timer */ - bnez t1, ll_cputimer_irq - - /* now look at the extended interrupts */ - mfc0 t0, CP0_CAUSE - cfc0 t1, CP0_S1_INTCONTROL - - /* shift the mask 8 bits left to line up the bits */ - sll t2, t1, 8 - - and t0, t2 - srl t0, t0, 16 - - andi t1, t0, STATUSF_IP8 /* int6 hardware line */ - bnez t1, ll_pmc1_irq - andi t1, t0, STATUSF_IP9 /* int7 hardware line */ - bnez t1, ll_pmc2_irq - andi t1, t0, STATUSF_IP10 /* int8 hardware line */ - bnez t1, ll_cpci_abcd_irq - andi t1, t0, STATUSF_IP11 /* int9 hardware line */ - bnez t1, ll_uart2_irq - - .set reorder - - /* wrong alarm or masked ... */ - j spurious_interrupt - nop - END(ocelot_handle_int) - - .align 5 -ll_pri_enet_irq: - li a0, 2 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_sec_enet_irq: - li a0, 3 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_uart1_irq: - li a0, 4 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_cpci_irq: - li a0, 5 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_galileo_irq: - li a0, 6 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_cputimer_irq: - li a0, 7 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_pmc1_irq: - li a0, 8 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_pmc2_irq: - li a0, 9 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_cpci_abcd_irq: - li a0, 10 - move a1, sp - jal do_IRQ - j ret_from_irq - -ll_uart2_irq: - li a0, 11 - move a1, sp - jal do_IRQ - j ret_from_irq diff --git a/arch/mips/gt64120/momenco_ocelot/irq.c b/arch/mips/gt64120/momenco_ocelot/irq.c index 4f108da71b2..885f67f32ea 100644 --- a/arch/mips/gt64120/momenco_ocelot/irq.c +++ b/arch/mips/gt64120/momenco_ocelot/irq.c @@ -48,7 +48,38 @@ #include #include -extern asmlinkage void ocelot_handle_int(void); +asmlinkage void plat_irq_dispatch(struct pt_regs *regs) +{ + unsigned int pending = read_c0_status() & read_c0_cause(); + + if (pending & STATUSF_IP2) /* int0 hardware line */ + do_IRQ(2, regs); + else if (pending & STATUSF_IP3) /* int1 hardware line */ + do_IRQ(3, regs); + else if (pending & STATUSF_IP4) /* int2 hardware line */ + do_IRQ(4, regs); + else if (pending & STATUSF_IP5) /* int3 hardware line */ + do_IRQ(5, regs); + else if (pending & STATUSF_IP6) /* int4 hardware line */ + do_IRQ(6, regs); + else if (pending & STATUSF_IP7) /* cpu timer */ + do_IRQ(7, regs); + else { + /* + * Now look at the extended interrupts + */ + pending = (read_c0_cause() & (read_c0_intcontrol() << 8)) >> 16; + + if (pending & STATUSF_IP8) /* int6 hardware line */ + do_IRQ(8, regs); + else if (pending & STATUSF_IP9) /* int7 hardware line */ + do_IRQ(9, regs); + else if (pending & STATUSF_IP10) /* int8 hardware line */ + do_IRQ(10, regs); + else if (pending & STATUSF_IP11) /* int9 hardware line */ + do_IRQ(11, regs); + } +} void __init arch_init_irq(void) { @@ -59,9 +90,6 @@ void __init arch_init_irq(void) clear_c0_status(ST0_IM); local_irq_disable(); - /* Sets the first-level interrupt dispatcher. */ - set_except_vector(0, ocelot_handle_int); - mips_cpu_irq_init(0); rm7k_cpu_irq_init(8); } -- cgit v1.2.3