From 9fa126da4a9addec77db4663933ed592188a0741 Mon Sep 17 00:00:00 2001 From: Niklaus Giger Date: Wed, 1 Oct 2008 19:23:23 +0000 Subject: powerpc/40x: Add support for Netstal HCU4 board Adds support for a HCU4 PPC405GPr based board from Netstal Maschinen AG. Signed-off-by: Niklaus Giger Signed-off-by: Josh Boyer --- arch/powerpc/boot/dts/hcu4.dts | 168 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 168 insertions(+) create mode 100644 arch/powerpc/boot/dts/hcu4.dts (limited to 'arch/powerpc/boot/dts/hcu4.dts') diff --git a/arch/powerpc/boot/dts/hcu4.dts b/arch/powerpc/boot/dts/hcu4.dts new file mode 100644 index 00000000000..7988598da4c --- /dev/null +++ b/arch/powerpc/boot/dts/hcu4.dts @@ -0,0 +1,168 @@ +/* +* Device Tree Source for Netstal Maschinen HCU4 +* based on the IBM Walnut +* +* Copyright 2008 +* Niklaus Giger +* +* Copyright 2007 IBM Corp. +* Josh Boyer +* +* This file is licensed under the terms of the GNU General Public +* License version 2. This program is licensed "as is" without +* any warranty of any kind, whether express or implied. +*/ + +/dts-v1/; + +/ { + #address-cells = <0x1>; + #size-cells = <0x1>; + model = "netstal,hcu4"; + compatible = "netstal,hcu4"; + dcr-parent = <0x1>; + + aliases { + ethernet0 = "/plb/opb/ethernet@ef600800"; + serial0 = "/plb/opb/serial@ef600300"; + }; + + cpus { + #address-cells = <0x1>; + #size-cells = <0x0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,405GPr"; + reg = <0x0>; + clock-frequency = <0>; /* Filled in by U-Boot */ + timebase-frequency = <0x0>; /* Filled in by U-Boot */ + i-cache-line-size = <0x20>; + d-cache-line-size = <0x20>; + i-cache-size = <0x4000>; + d-cache-size = <0x4000>; + dcr-controller; + dcr-access-method = "native"; + linux,phandle = <0x1>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x0>; /* Filled in by U-Boot */ + }; + + UIC0: interrupt-controller { + compatible = "ibm,uic"; + interrupt-controller; + cell-index = <0x0>; + dcr-reg = <0xc0 0x9>; + #address-cells = <0x0>; + #size-cells = <0x0>; + #interrupt-cells = <0x2>; + linux,phandle = <0x2>; + }; + + plb { + compatible = "ibm,plb3"; + #address-cells = <0x1>; + #size-cells = <0x1>; + ranges; + clock-frequency = <0x0>; /* Filled in by U-Boot */ + + SDRAM0: memory-controller { + compatible = "ibm,sdram-405gp"; + dcr-reg = <0x10 0x2>; + }; + + MAL: mcmal { + compatible = "ibm,mcmal-405gp", "ibm,mcmal"; + dcr-reg = <0x180 0x62>; + num-tx-chans = <0x1>; + num-rx-chans = <0x1>; + interrupt-parent = <0x2>; + interrupts = <0xb 0x4 0xc 0x4 0xa 0x4 0xd 0x4 0xe 0x4>; + linux,phandle = <0x3>; + }; + + POB0: opb { + compatible = "ibm,opb-405gp", "ibm,opb"; + #address-cells = <0x1>; + #size-cells = <0x1>; + ranges = <0xef600000 0xef600000 0xa00000>; + dcr-reg = <0xa0 0x5>; + clock-frequency = <0x0>; /* Filled in by U-Boot */ + + UART0: serial@ef600300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600300 0x8>; + virtual-reg = <0xef600300>; + clock-frequency = <0x0>;/* Filled in by U-Boot */ + current-speed = <0>; /* Filled in by U-Boot */ + interrupt-parent = <0x2>; + interrupts = <0x0 0x4>; + }; + + IIC: i2c@ef600500 { + compatible = "ibm,iic-405gp", "ibm,iic"; + reg = <0xef600500 0x11>; + interrupt-parent = <0x2>; + interrupts = <0x2 0x4>; + }; + + GPIO: gpio@ef600700 { + compatible = "ibm,gpio-405gp"; + reg = <0xef600700 0x20>; + }; + + EMAC: ethernet@ef600800 { + device_type = "network"; + compatible = "ibm,emac-405gp", "ibm,emac"; + interrupt-parent = <0x2>; + interrupts = <0xf 0x4 0x9 0x4>; + local-mac-address = [00 00 00 00 00 00]; + reg = <0xef600800 0x70>; + mal-device = <0x3>; + mal-tx-channel = <0x0>; + mal-rx-channel = <0x0>; + cell-index = <0x0>; + max-frame-size = <0x5dc>; + rx-fifo-size = <0x1000>; + tx-fifo-size = <0x800>; + phy-mode = "rmii"; + phy-map = <0x1>; + }; + }; + + EBC0: ebc { + compatible = "ibm,ebc-405gp", "ibm,ebc"; + dcr-reg = <0x12 0x2>; + #address-cells = <0x2>; + #size-cells = <0x1>; + clock-frequency = <0x0>; /* Filled in by U-Boot */ + + sram@0,0 { + reg = <0x0 0x0 0x80000>; + }; + + flash@0,80000 { + compatible = "jedec-flash"; + bank-width = <0x1>; + reg = <0x0 0x80000 0x80000>; + #address-cells = <0x1>; + #size-cells = <0x1>; + + partition@0 { + label = "OpenBIOS"; + reg = <0x0 0x80000>; + read-only; + }; + }; + }; + }; + + chosen { + linux,stdout-path = "/plb/opb/serial@ef600300"; + }; +}; -- cgit v1.2.3