From 9b9d401b8d11796f4c4bcbcabecfec9f5d85ea25 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Wed, 19 Aug 2009 03:28:21 +0400 Subject: powerpc/85xx: Add QE USB support for MPC8569E-MDS boards - Add gpio-controller node for BCSR17, it is used to control USB speed and VBUS; - Add timer node for QE GTM, needed for USB host; - Add usb node itself; - Add some probing code for BCSR GPIOs. NOTE: QE USB doesn't work on prototype boards, but should work on pilot boards if specs and schematics are correct, though we don't have the pilot boards to actually test it. Signed-off-by: Anton Vorontsov Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/mpc8569mds.dts | 45 ++++++++++++++++++++++++++++++++++++ 1 file changed, 45 insertions(+) (limited to 'arch/powerpc/boot') diff --git a/arch/powerpc/boot/dts/mpc8569mds.dts b/arch/powerpc/boot/dts/mpc8569mds.dts index 9e4ce99e161..06332d61830 100644 --- a/arch/powerpc/boot/dts/mpc8569mds.dts +++ b/arch/powerpc/boot/dts/mpc8569mds.dts @@ -99,8 +99,18 @@ }; bcsr@1,0 { + #address-cells = <1>; + #size-cells = <1>; compatible = "fsl,mpc8569mds-bcsr"; reg = <1 0 0x8000>; + ranges = <0 1 0 0x8000>; + + bcsr17: gpio-controller@11 { + #gpio-cells = <2>; + compatible = "fsl,mpc8569mds-bcsr-gpio"; + reg = <0x11 0x1>; + gpio-controller; + }; }; nand@3,0 { @@ -315,6 +325,14 @@ gpio-controller; }; + qe_pio_f: gpio-controller@a0 { + #gpio-cells = <2>; + compatible = "fsl,mpc8569-qe-pario-bank", + "fsl,mpc8323-qe-pario-bank"; + reg = <0xa0 0x18>; + gpio-controller; + }; + pio1: ucc_pin@01 { pio-map = < /* port pin dir open_drain assignment has_irq */ @@ -419,6 +437,16 @@ interrupt-parent = <&mpic>; }; + timer@440 { + compatible = "fsl,mpc8569-qe-gtm", + "fsl,qe-gtm", "fsl,gtm"; + reg = <0x440 0x40>; + interrupts = <12 13 14 15>; + interrupt-parent = <&qeic>; + /* Filled in by U-Boot */ + clock-frequency = <0>; + }; + spi@4c0 { #address-cells = <1>; #size-cells = <0>; @@ -446,6 +474,23 @@ mode = "cpu"; }; + usb@6c0 { + compatible = "fsl,mpc8569-qe-usb", + "fsl,mpc8323-qe-usb"; + reg = <0x6c0 0x40 0x8b00 0x100>; + interrupts = <11>; + interrupt-parent = <&qeic>; + fsl,fullspeed-clock = "clk5"; + fsl,lowspeed-clock = "brg10"; + gpios = <&qe_pio_f 3 0 /* USBOE */ + &qe_pio_f 4 0 /* USBTP */ + &qe_pio_f 5 0 /* USBTN */ + &qe_pio_f 6 0 /* USBRP */ + &qe_pio_f 8 0 /* USBRN */ + &bcsr17 6 0 /* SPEED */ + &bcsr17 5 1>; /* POWER */ + }; + enet0: ucc@2000 { device_type = "network"; compatible = "ucc_geth"; -- cgit v1.2.3