From 98fb1807b97e3e631b940f67544e265c64b984dc Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Wed, 17 Jun 2009 21:53:10 +1000 Subject: perf_counter: powerpc: Make powerpc perf_counter code safe for 32-bit kernels This abstracts a few things in arch/powerpc/kernel/perf_counter.c that are specific to 64-bit kernels, and provides definitions for 32-bit kernels. In particular, * Only 64-bit has MMCRA and the bits in it that give information about a PMU interrupt (sampled PR, HV, slot number etc.) * Only 64-bit has the lppaca and the lppaca->pmcregs_in_use field * Use of SDAR is confined to 64-bit for now * Only 64-bit has soft/lazy interrupt disable and therefore pseudo-NMIs (interrupts that occur while interrupts are soft-disabled) * Only 64-bit has PMC7 and PMC8 * Only 64-bit has the MSR_HV bit. This also fixes the types used in a couple of places, where we were using long types for things that need to be 64-bit. Signed-off-by: Paul Mackerras Cc: Peter Zijlstra Cc: linuxppc-dev@ozlabs.org Cc: benh@kernel.crashing.org LKML-Reference: <19000.55590.634126.876084@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar --- arch/powerpc/kernel/perf_counter.c | 193 +++++++++++++++++++++++++------------ 1 file changed, 133 insertions(+), 60 deletions(-) (limited to 'arch/powerpc/kernel') diff --git a/arch/powerpc/kernel/perf_counter.c b/arch/powerpc/kernel/perf_counter.c index 25e656c1494..809fdf94b95 100644 --- a/arch/powerpc/kernel/perf_counter.c +++ b/arch/powerpc/kernel/perf_counter.c @@ -46,6 +46,115 @@ struct power_pmu *ppmu; */ static unsigned int freeze_counters_kernel = MMCR0_FCS; +/* + * 32-bit doesn't have MMCRA but does have an MMCR2, + * and a few other names are different. + */ +#ifdef CONFIG_PPC32 + +#define MMCR0_FCHV 0 +#define MMCR0_PMCjCE MMCR0_PMCnCE + +#define SPRN_MMCRA SPRN_MMCR2 +#define MMCRA_SAMPLE_ENABLE 0 + +static inline unsigned long perf_ip_adjust(struct pt_regs *regs) +{ + return 0; +} +static inline void perf_set_pmu_inuse(int inuse) { } +static inline void perf_get_data_addr(struct pt_regs *regs, u64 *addrp) { } +static inline u32 perf_get_misc_flags(struct pt_regs *regs) +{ + return 0; +} +static inline void perf_read_regs(struct pt_regs *regs) { } +static inline int perf_intr_is_nmi(struct pt_regs *regs) +{ + return 0; +} + +#endif /* CONFIG_PPC32 */ + +/* + * Things that are specific to 64-bit implementations. + */ +#ifdef CONFIG_PPC64 + +static inline unsigned long perf_ip_adjust(struct pt_regs *regs) +{ + unsigned long mmcra = regs->dsisr; + + if ((mmcra & MMCRA_SAMPLE_ENABLE) && !(ppmu->flags & PPMU_ALT_SIPR)) { + unsigned long slot = (mmcra & MMCRA_SLOT) >> MMCRA_SLOT_SHIFT; + if (slot > 1) + return 4 * (slot - 1); + } + return 0; +} + +static inline void perf_set_pmu_inuse(int inuse) +{ + get_lppaca()->pmcregs_in_use = inuse; +} + +/* + * The user wants a data address recorded. + * If we're not doing instruction sampling, give them the SDAR + * (sampled data address). If we are doing instruction sampling, then + * only give them the SDAR if it corresponds to the instruction + * pointed to by SIAR; this is indicated by the [POWER6_]MMCRA_SDSYNC + * bit in MMCRA. + */ +static inline void perf_get_data_addr(struct pt_regs *regs, u64 *addrp) +{ + unsigned long mmcra = regs->dsisr; + unsigned long sdsync = (ppmu->flags & PPMU_ALT_SIPR) ? + POWER6_MMCRA_SDSYNC : MMCRA_SDSYNC; + + if (!(mmcra & MMCRA_SAMPLE_ENABLE) || (mmcra & sdsync)) + *addrp = mfspr(SPRN_SDAR); +} + +static inline u32 perf_get_misc_flags(struct pt_regs *regs) +{ + unsigned long mmcra = regs->dsisr; + + if (TRAP(regs) != 0xf00) + return 0; /* not a PMU interrupt */ + + if (ppmu->flags & PPMU_ALT_SIPR) { + if (mmcra & POWER6_MMCRA_SIHV) + return PERF_EVENT_MISC_HYPERVISOR; + return (mmcra & POWER6_MMCRA_SIPR) ? + PERF_EVENT_MISC_USER : PERF_EVENT_MISC_KERNEL; + } + if (mmcra & MMCRA_SIHV) + return PERF_EVENT_MISC_HYPERVISOR; + return (mmcra & MMCRA_SIPR) ? PERF_EVENT_MISC_USER : + PERF_EVENT_MISC_KERNEL; +} + +/* + * Overload regs->dsisr to store MMCRA so we only need to read it once + * on each interrupt. + */ +static inline void perf_read_regs(struct pt_regs *regs) +{ + regs->dsisr = mfspr(SPRN_MMCRA); +} + +/* + * If interrupts were soft-disabled when a PMU interrupt occurs, treat + * it as an NMI. + */ +static inline int perf_intr_is_nmi(struct pt_regs *regs) +{ + return !regs->softe; +} + +#endif /* CONFIG_PPC64 */ + static void perf_counter_interrupt(struct pt_regs *regs); void perf_counter_print_debug(void) @@ -78,12 +187,14 @@ static unsigned long read_pmc(int idx) case 6: val = mfspr(SPRN_PMC6); break; +#ifdef CONFIG_PPC64 case 7: val = mfspr(SPRN_PMC7); break; case 8: val = mfspr(SPRN_PMC8); break; +#endif /* CONFIG_PPC64 */ default: printk(KERN_ERR "oops trying to read PMC%d\n", idx); val = 0; @@ -115,12 +226,14 @@ static void write_pmc(int idx, unsigned long val) case 6: mtspr(SPRN_PMC6, val); break; +#ifdef CONFIG_PPC64 case 7: mtspr(SPRN_PMC7, val); break; case 8: mtspr(SPRN_PMC8, val); break; +#endif /* CONFIG_PPC64 */ default: printk(KERN_ERR "oops trying to write PMC%d\n", idx); } @@ -283,7 +396,7 @@ static int check_excludes(struct perf_counter **ctrs, unsigned int cflags[], static void power_pmu_read(struct perf_counter *counter) { - long val, delta, prev; + s64 val, delta, prev; if (!counter->hw.idx) return; @@ -477,7 +590,7 @@ void hw_perf_enable(void) mtspr(SPRN_MMCRA, cpuhw->mmcr[2] & ~MMCRA_SAMPLE_ENABLE); mtspr(SPRN_MMCR1, cpuhw->mmcr[1]); if (cpuhw->n_counters == 0) - get_lppaca()->pmcregs_in_use = 0; + perf_set_pmu_inuse(0); goto out_enable; } @@ -510,7 +623,7 @@ void hw_perf_enable(void) * bit set and set the hardware counters to their initial values. * Then unfreeze the counters. */ - get_lppaca()->pmcregs_in_use = 1; + perf_set_pmu_inuse(1); mtspr(SPRN_MMCRA, cpuhw->mmcr[2] & ~MMCRA_SAMPLE_ENABLE); mtspr(SPRN_MMCR1, cpuhw->mmcr[1]); mtspr(SPRN_MMCR0, (cpuhw->mmcr[0] & ~(MMCR0_PMC1CE | MMCR0_PMCjCE)) @@ -1007,11 +1120,10 @@ const struct pmu *hw_perf_counter_init(struct perf_counter *counter) * things if requested. Note that interrupts are hard-disabled * here so there is no possibility of being interrupted. */ -static void record_and_restart(struct perf_counter *counter, long val, +static void record_and_restart(struct perf_counter *counter, unsigned long val, struct pt_regs *regs, int nmi) { u64 period = counter->hw.sample_period; - unsigned long mmcra, sdsync; s64 prev, delta, left; int record = 0; @@ -1033,8 +1145,8 @@ static void record_and_restart(struct perf_counter *counter, long val, left = period; record = 1; } - if (left < 0x80000000L) - val = 0x80000000L - left; + if (left < 0x80000000LL) + val = 0x80000000LL - left; } /* @@ -1047,22 +1159,9 @@ static void record_and_restart(struct perf_counter *counter, long val, .period = counter->hw.last_period, }; - if (counter->attr.sample_type & PERF_SAMPLE_ADDR) { - /* - * The user wants a data address recorded. - * If we're not doing instruction sampling, - * give them the SDAR (sampled data address). - * If we are doing instruction sampling, then only - * give them the SDAR if it corresponds to the - * instruction pointed to by SIAR; this is indicated - * by the [POWER6_]MMCRA_SDSYNC bit in MMCRA. - */ - mmcra = regs->dsisr; - sdsync = (ppmu->flags & PPMU_ALT_SIPR) ? - POWER6_MMCRA_SDSYNC : MMCRA_SDSYNC; - if (!(mmcra & MMCRA_SAMPLE_ENABLE) || (mmcra & sdsync)) - data.addr = mfspr(SPRN_SDAR); - } + if (counter->attr.sample_type & PERF_SAMPLE_ADDR) + perf_get_data_addr(regs, &data.addr); + if (perf_counter_overflow(counter, nmi, &data)) { /* * Interrupts are coming too fast - throttle them @@ -1088,25 +1187,12 @@ static void record_and_restart(struct perf_counter *counter, long val, */ unsigned long perf_misc_flags(struct pt_regs *regs) { - unsigned long mmcra; + u32 flags = perf_get_misc_flags(regs); - if (TRAP(regs) != 0xf00) { - /* not a PMU interrupt */ - return user_mode(regs) ? PERF_EVENT_MISC_USER : - PERF_EVENT_MISC_KERNEL; - } - - mmcra = regs->dsisr; - if (ppmu->flags & PPMU_ALT_SIPR) { - if (mmcra & POWER6_MMCRA_SIHV) - return PERF_EVENT_MISC_HYPERVISOR; - return (mmcra & POWER6_MMCRA_SIPR) ? PERF_EVENT_MISC_USER : - PERF_EVENT_MISC_KERNEL; - } - if (mmcra & MMCRA_SIHV) - return PERF_EVENT_MISC_HYPERVISOR; - return (mmcra & MMCRA_SIPR) ? PERF_EVENT_MISC_USER : - PERF_EVENT_MISC_KERNEL; + if (flags) + return flags; + return user_mode(regs) ? PERF_EVENT_MISC_USER : + PERF_EVENT_MISC_KERNEL; } /* @@ -1115,20 +1201,12 @@ unsigned long perf_misc_flags(struct pt_regs *regs) */ unsigned long perf_instruction_pointer(struct pt_regs *regs) { - unsigned long mmcra; unsigned long ip; - unsigned long slot; if (TRAP(regs) != 0xf00) return regs->nip; /* not a PMU interrupt */ - ip = mfspr(SPRN_SIAR); - mmcra = regs->dsisr; - if ((mmcra & MMCRA_SAMPLE_ENABLE) && !(ppmu->flags & PPMU_ALT_SIPR)) { - slot = (mmcra & MMCRA_SLOT) >> MMCRA_SLOT_SHIFT; - if (slot > 1) - ip += 4 * (slot - 1); - } + ip = mfspr(SPRN_SIAR) + perf_ip_adjust(regs); return ip; } @@ -1140,7 +1218,7 @@ static void perf_counter_interrupt(struct pt_regs *regs) int i; struct cpu_hw_counters *cpuhw = &__get_cpu_var(cpu_hw_counters); struct perf_counter *counter; - long val; + unsigned long val; int found = 0; int nmi; @@ -1148,16 +1226,9 @@ static void perf_counter_interrupt(struct pt_regs *regs) freeze_limited_counters(cpuhw, mfspr(SPRN_PMC5), mfspr(SPRN_PMC6)); - /* - * Overload regs->dsisr to store MMCRA so we only need to read it once. - */ - regs->dsisr = mfspr(SPRN_MMCRA); + perf_read_regs(regs); - /* - * If interrupts were soft-disabled when this PMU interrupt - * occurred, treat it as an NMI. - */ - nmi = !regs->softe; + nmi = perf_intr_is_nmi(regs); if (nmi) nmi_enter(); else @@ -1223,11 +1294,13 @@ int register_power_pmu(struct power_pmu *pmu) pr_info("%s performance monitor hardware support registered\n", pmu->name); +#ifdef MSR_HV /* * Use FCHV to ignore kernel events if MSR.HV is set. */ if (mfmsr() & MSR_HV) freeze_counters_kernel = MMCR0_FCHV; +#endif /* CONFIG_PPC64 */ return 0; } -- cgit v1.2.3