From bbd0abda9cc689a54df509aae00000bbb2a1a7d1 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Wed, 26 Oct 2005 21:45:56 +1000 Subject: powerpc: Merge 32-bit CHRP support. SMP still needs more work but UP gets as far as starting userspace at least. This uses the 64-bit-style code for spinning up the cpus. Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/chrp/setup.c | 523 ++++++++++++++++++++++++++++++++++++ 1 file changed, 523 insertions(+) create mode 100644 arch/powerpc/platforms/chrp/setup.c (limited to 'arch/powerpc/platforms/chrp/setup.c') diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c new file mode 100644 index 00000000000..5145990e6a0 --- /dev/null +++ b/arch/powerpc/platforms/chrp/setup.c @@ -0,0 +1,523 @@ +/* + * arch/ppc/platforms/setup.c + * + * Copyright (C) 1995 Linus Torvalds + * Adapted from 'alpha' version by Gary Thomas + * Modified by Cort Dougan (cort@cs.nmt.edu) + */ + +/* + * bootup setup stuff.. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +void chrp_get_rtc_time(struct rtc_time *); +int chrp_set_rtc_time(struct rtc_time *); +void chrp_calibrate_decr(void); +long chrp_time_init(void); + +void chrp_find_bridges(void); +void chrp_event_scan(void); +void rtas_indicator_progress(char *, unsigned short); +void btext_progress(char *, unsigned short); + +int _chrp_type; +EXPORT_SYMBOL(_chrp_type); + +struct mpic *chrp_mpic; + +/* + * XXX this should be in xmon.h, but putting it there means xmon.h + * has to include (to get irqreturn_t), which + * causes all sorts of problems. -- paulus + */ +extern irqreturn_t xmon_irq(int, void *, struct pt_regs *); + +extern unsigned long loops_per_jiffy; + +#ifdef CONFIG_SMP +extern struct smp_ops_t chrp_smp_ops; +#endif + +static const char *gg2_memtypes[4] = { + "FPM", "SDRAM", "EDO", "BEDO" +}; +static const char *gg2_cachesizes[4] = { + "256 KB", "512 KB", "1 MB", "Reserved" +}; +static const char *gg2_cachetypes[4] = { + "Asynchronous", "Reserved", "Flow-Through Synchronous", + "Pipelined Synchronous" +}; +static const char *gg2_cachemodes[4] = { + "Disabled", "Write-Through", "Copy-Back", "Transparent Mode" +}; + +void chrp_show_cpuinfo(struct seq_file *m) +{ + int i, sdramen; + unsigned int t; + struct device_node *root; + const char *model = ""; + + root = find_path_device("/"); + if (root) + model = get_property(root, "model", NULL); + seq_printf(m, "machine\t\t: CHRP %s\n", model); + + /* longtrail (goldengate) stuff */ + if (!strncmp(model, "IBM,LongTrail", 13)) { + /* VLSI VAS96011/12 `Golden Gate 2' */ + /* Memory banks */ + sdramen = (in_le32(gg2_pci_config_base + GG2_PCI_DRAM_CTRL) + >>31) & 1; + for (i = 0; i < (sdramen ? 4 : 6); i++) { + t = in_le32(gg2_pci_config_base+ + GG2_PCI_DRAM_BANK0+ + i*4); + if (!(t & 1)) + continue; + switch ((t>>8) & 0x1f) { + case 0x1f: + model = "4 MB"; + break; + case 0x1e: + model = "8 MB"; + break; + case 0x1c: + model = "16 MB"; + break; + case 0x18: + model = "32 MB"; + break; + case 0x10: + model = "64 MB"; + break; + case 0x00: + model = "128 MB"; + break; + default: + model = "Reserved"; + break; + } + seq_printf(m, "memory bank %d\t: %s %s\n", i, model, + gg2_memtypes[sdramen ? 1 : ((t>>1) & 3)]); + } + /* L2 cache */ + t = in_le32(gg2_pci_config_base+GG2_PCI_CC_CTRL); + seq_printf(m, "board l2\t: %s %s (%s)\n", + gg2_cachesizes[(t>>7) & 3], + gg2_cachetypes[(t>>2) & 3], + gg2_cachemodes[t & 3]); + } +} + +/* + * Fixes for the National Semiconductor PC78308VUL SuperI/O + * + * Some versions of Open Firmware incorrectly initialize the IRQ settings + * for keyboard and mouse + */ +static inline void __init sio_write(u8 val, u8 index) +{ + outb(index, 0x15c); + outb(val, 0x15d); +} + +static inline u8 __init sio_read(u8 index) +{ + outb(index, 0x15c); + return inb(0x15d); +} + +static void __init sio_fixup_irq(const char *name, u8 device, u8 level, + u8 type) +{ + u8 level0, type0, active; + + /* select logical device */ + sio_write(device, 0x07); + active = sio_read(0x30); + level0 = sio_read(0x70); + type0 = sio_read(0x71); + if (level0 != level || type0 != type || !active) { + printk(KERN_WARNING "sio: %s irq level %d, type %d, %sactive: " + "remapping to level %d, type %d, active\n", + name, level0, type0, !active ? "in" : "", level, type); + sio_write(0x01, 0x30); + sio_write(level, 0x70); + sio_write(type, 0x71); + } +} + +static void __init sio_init(void) +{ + struct device_node *root; + + if ((root = find_path_device("/")) && + !strncmp(get_property(root, "model", NULL), "IBM,LongTrail", 13)) { + /* logical device 0 (KBC/Keyboard) */ + sio_fixup_irq("keyboard", 0, 1, 2); + /* select logical device 1 (KBC/Mouse) */ + sio_fixup_irq("mouse", 1, 12, 2); + } +} + + +static void __init pegasos_set_l2cr(void) +{ + struct device_node *np; + + /* On Pegasos, enable the l2 cache if needed, as the OF forgets it */ + if (_chrp_type != _CHRP_Pegasos) + return; + + /* Enable L2 cache if needed */ + np = find_type_devices("cpu"); + if (np != NULL) { + unsigned int *l2cr = (unsigned int *) + get_property (np, "l2cr", NULL); + if (l2cr == NULL) { + printk ("Pegasos l2cr : no cpu l2cr property found\n"); + return; + } + if (!((*l2cr) & 0x80000000)) { + printk ("Pegasos l2cr : L2 cache was not active, " + "activating\n"); + _set_L2CR(0); + _set_L2CR((*l2cr) | 0x80000000); + } + } +} + +void __init chrp_setup_arch(void) +{ + struct device_node *root = find_path_device ("/"); + char *machine = NULL; + struct device_node *device; + unsigned int *p = NULL; + + /* init to some ~sane value until calibrate_delay() runs */ + loops_per_jiffy = 50000000/HZ; + + if (root) + machine = get_property(root, "model", NULL); + if (machine && strncmp(machine, "Pegasos", 7) == 0) { + _chrp_type = _CHRP_Pegasos; + } else if (machine && strncmp(machine, "IBM", 3) == 0) { + _chrp_type = _CHRP_IBM; + } else if (machine && strncmp(machine, "MOT", 3) == 0) { + _chrp_type = _CHRP_Motorola; + } else { + /* Let's assume it is an IBM chrp if all else fails */ + _chrp_type = _CHRP_IBM; + } + printk("chrp type = %x\n", _chrp_type); + + rtas_initialize(); + if (rtas_token("display-character") >= 0) + ppc_md.progress = rtas_progress; + +#ifdef CONFIG_BOOTX_TEXT + if (ppc_md.progress == NULL && boot_text_mapped) + ppc_md.progress = btext_progress; +#endif + +#ifdef CONFIG_BLK_DEV_INITRD + /* this is fine for chrp */ + initrd_below_start_ok = 1; + + if (initrd_start) + ROOT_DEV = Root_RAM0; + else +#endif + ROOT_DEV = Root_SDA2; /* sda2 (sda1 is for the kernel) */ + + /* On pegasos, enable the L2 cache if not already done by OF */ + pegasos_set_l2cr(); + + /* Lookup PCI host bridges */ + chrp_find_bridges(); + + /* + * Temporary fixes for PCI devices. + * -- Geert + */ + hydra_init(); /* Mac I/O */ + + /* + * Fix the Super I/O configuration + */ + sio_init(); + + /* Get the event scan rate for the rtas so we know how + * often it expects a heartbeat. -- Cort + */ + device = find_devices("rtas"); + if (device) + p = (unsigned int *) get_property + (device, "rtas-event-scan-rate", NULL); + if (p && *p) { + ppc_md.heartbeat = chrp_event_scan; + ppc_md.heartbeat_reset = HZ / (*p * 30) - 1; + ppc_md.heartbeat_count = 1; + printk("RTAS Event Scan Rate: %u (%lu jiffies)\n", + *p, ppc_md.heartbeat_reset); + } + + pci_create_OF_bus_map(); + + /* + * Print the banner, then scroll down so boot progress + * can be printed. -- Cort + */ + if (ppc_md.progress) ppc_md.progress("Linux/PPC "UTS_RELEASE"\n", 0x0); +} + +void +chrp_event_scan(void) +{ + unsigned char log[1024]; + int ret = 0; + + /* XXX: we should loop until the hardware says no more error logs -- Cort */ + rtas_call(rtas_token("event-scan"), 4, 1, &ret, 0xffffffff, 0, + __pa(log), 1024); + ppc_md.heartbeat_count = ppc_md.heartbeat_reset; +} + +/* + * Finds the open-pic node and sets up the mpic driver. + */ +static void __init chrp_find_openpic(void) +{ + struct device_node *np, *root; + int len, i, j, irq_count; + int isu_size, idu_size; + unsigned int *iranges, *opprop = NULL; + int oplen = 0; + unsigned long opaddr; + int na = 1; + unsigned char init_senses[NR_IRQS - NUM_8259_INTERRUPTS]; + + np = find_type_devices("open-pic"); + if (np == NULL) + return; + root = find_path_device("/"); + if (root) { + opprop = (unsigned int *) get_property + (root, "platform-open-pic", &oplen); + na = prom_n_addr_cells(root); + } + if (opprop && oplen >= na * sizeof(unsigned int)) { + opaddr = opprop[na-1]; /* assume 32-bit */ + oplen /= na * sizeof(unsigned int); + } else { + if (np->n_addrs == 0) + return; + opaddr = np->addrs[0].address; + oplen = 0; + } + + printk(KERN_INFO "OpenPIC at %lx\n", opaddr); + + irq_count = NR_IRQS - NUM_ISA_INTERRUPTS - 4; /* leave room for IPIs */ + prom_get_irq_senses(init_senses, NUM_8259_INTERRUPTS, NR_IRQS - 4); + + iranges = (unsigned int *) get_property(np, "interrupt-ranges", &len); + if (iranges == NULL) + len = 0; /* non-distributed mpic */ + else + len /= 2 * sizeof(unsigned int); + + /* + * The first pair of cells in interrupt-ranges refers to the + * IDU; subsequent pairs refer to the ISUs. + */ + if (oplen < len) { + printk(KERN_ERR "Insufficient addresses for distributed" + " OpenPIC (%d < %d)\n", np->n_addrs, len); + len = oplen; + } + + isu_size = 0; + idu_size = 0; + if (len > 0 && iranges[1] != 0) { + printk(KERN_INFO "OpenPIC irqs %d..%d in IDU\n", + iranges[0], iranges[0] + iranges[1] - 1); + idu_size = iranges[1]; + } + if (len > 1) + isu_size = iranges[3]; + + chrp_mpic = mpic_alloc(opaddr, MPIC_PRIMARY, + isu_size, NUM_ISA_INTERRUPTS, irq_count, + NR_IRQS - 4, init_senses, irq_count, + " MPIC "); + if (chrp_mpic == NULL) { + printk(KERN_ERR "Failed to allocate MPIC structure\n"); + return; + } + + j = na - 1; + for (i = 1; i < len; ++i) { + iranges += 2; + j += na; + printk(KERN_INFO "OpenPIC irqs %d..%d in ISU at %x\n", + iranges[0], iranges[0] + iranges[1] - 1, + opprop[j]); + mpic_assign_isu(chrp_mpic, i - 1, opprop[j]); + } + + mpic_init(chrp_mpic); + mpic_setup_cascade(NUM_ISA_INTERRUPTS, i8259_irq_cascade, NULL); +} + +#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(XMON) +static struct irqaction xmon_irqaction = { + .handler = xmon_irq, + .mask = CPU_MASK_NONE, + .name = "XMON break", +}; +#endif + +void __init chrp_init_IRQ(void) +{ + struct device_node *np; + unsigned long chrp_int_ack = 0; +#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(XMON) + struct device_node *kbd; +#endif + + for (np = find_devices("pci"); np != NULL; np = np->next) { + unsigned int *addrp = (unsigned int *) + get_property(np, "8259-interrupt-acknowledge", NULL); + + if (addrp == NULL) + continue; + chrp_int_ack = addrp[prom_n_addr_cells(np)-1]; + break; + } + if (np == NULL) + printk(KERN_ERR "Cannot find PCI interrupt acknowledge address\n"); + + chrp_find_openpic(); + + i8259_init(chrp_int_ack, 0); + + if (_chrp_type == _CHRP_Pegasos) + ppc_md.get_irq = i8259_irq; + else + ppc_md.get_irq = mpic_get_irq; + +#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(XMON) + /* see if there is a keyboard in the device tree + with a parent of type "adb" */ + for (kbd = find_devices("keyboard"); kbd; kbd = kbd->next) + if (kbd->parent && kbd->parent->type + && strcmp(kbd->parent->type, "adb") == 0) + break; + if (kbd) + setup_irq(HYDRA_INT_ADB_NMI, &xmon_irqaction); +#endif +} + +void __init +chrp_init2(void) +{ + request_region(0x20,0x20,"pic1"); + request_region(0xa0,0x20,"pic2"); + request_region(0x00,0x20,"dma1"); + request_region(0x40,0x20,"timer"); + request_region(0x80,0x10,"dma page reg"); + request_region(0xc0,0x20,"dma2"); + + if (ppc_md.progress) + ppc_md.progress(" Have fun! ", 0x7777); +} + +void __init chrp_init(void) +{ + ISA_DMA_THRESHOLD = ~0L; + DMA_MODE_READ = 0x44; + DMA_MODE_WRITE = 0x48; + isa_io_base = CHRP_ISA_IO_BASE; /* default value */ + ppc_do_canonicalize_irqs = 1; + + /* Assume we have an 8259... */ + __irq_offset_value = NUM_ISA_INTERRUPTS; + + ppc_md.setup_arch = chrp_setup_arch; + ppc_md.show_cpuinfo = chrp_show_cpuinfo; + + ppc_md.init_IRQ = chrp_init_IRQ; + ppc_md.init = chrp_init2; + + ppc_md.phys_mem_access_prot = pci_phys_mem_access_prot; + + ppc_md.restart = rtas_restart; + ppc_md.power_off = rtas_power_off; + ppc_md.halt = rtas_halt; + + ppc_md.time_init = chrp_time_init; + ppc_md.set_rtc_time = chrp_set_rtc_time; + ppc_md.get_rtc_time = chrp_get_rtc_time; + ppc_md.calibrate_decr = chrp_calibrate_decr; + +#ifdef CONFIG_SMP + smp_ops = &chrp_smp_ops; +#endif /* CONFIG_SMP */ +} + +#ifdef CONFIG_BOOTX_TEXT +void +btext_progress(char *s, unsigned short hex) +{ + btext_drawstring(s); + btext_drawstring("\n"); +} +#endif /* CONFIG_BOOTX_TEXT */ -- cgit v1.2.3