From cb4cf8056ead24ef0595859952319e2a608d5e07 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Wed, 28 Sep 2005 02:54:39 +1000 Subject: powerpc: Move iSeries_irq.c to powerpc/platorms/iseries And rename it to irq.c. Signed-off-by: Stephen Rothwell --- arch/powerpc/platforms/iseries/irq.c | 365 +++++++++++++++++++++++++++++++++++ 1 file changed, 365 insertions(+) create mode 100644 arch/powerpc/platforms/iseries/irq.c (limited to 'arch/powerpc/platforms/iseries/irq.c') diff --git a/arch/powerpc/platforms/iseries/irq.c b/arch/powerpc/platforms/iseries/irq.c new file mode 100644 index 00000000000..5a8a0056b31 --- /dev/null +++ b/arch/powerpc/platforms/iseries/irq.c @@ -0,0 +1,365 @@ +/* + * This module supports the iSeries PCI bus interrupt handling + * Copyright (C) 20yy + * Copyright (C) 2004-2005 IBM Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the: + * Free Software Foundation, Inc., + * 59 Temple Place, Suite 330, + * Boston, MA 02111-1307 USA + * + * Change Activity: + * Created, December 13, 2000 by Wayne Holm + * End Change Activity + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +/* This maps virtual irq numbers to real irqs */ +unsigned int virt_irq_to_real_map[NR_IRQS]; + +/* The next available virtual irq number */ +/* Note: the pcnet32 driver assumes irq numbers < 2 aren't valid. :( */ +static int next_virtual_irq = 2; + +static long Pci_Interrupt_Count; +static long Pci_Event_Count; + +enum XmPciLpEvent_Subtype { + XmPciLpEvent_BusCreated = 0, // PHB has been created + XmPciLpEvent_BusError = 1, // PHB has failed + XmPciLpEvent_BusFailed = 2, // Msg to Secondary, Primary failed bus + XmPciLpEvent_NodeFailed = 4, // Multi-adapter bridge has failed + XmPciLpEvent_NodeRecovered = 5, // Multi-adapter bridge has recovered + XmPciLpEvent_BusRecovered = 12, // PHB has been recovered + XmPciLpEvent_UnQuiesceBus = 18, // Secondary bus unqiescing + XmPciLpEvent_BridgeError = 21, // Bridge Error + XmPciLpEvent_SlotInterrupt = 22 // Slot interrupt +}; + +struct XmPciLpEvent_BusInterrupt { + HvBusNumber busNumber; + HvSubBusNumber subBusNumber; +}; + +struct XmPciLpEvent_NodeInterrupt { + HvBusNumber busNumber; + HvSubBusNumber subBusNumber; + HvAgentId deviceId; +}; + +struct XmPciLpEvent { + struct HvLpEvent hvLpEvent; + + union { + u64 alignData; // Align on an 8-byte boundary + + struct { + u32 fisr; + HvBusNumber busNumber; + HvSubBusNumber subBusNumber; + HvAgentId deviceId; + } slotInterrupt; + + struct XmPciLpEvent_BusInterrupt busFailed; + struct XmPciLpEvent_BusInterrupt busRecovered; + struct XmPciLpEvent_BusInterrupt busCreated; + + struct XmPciLpEvent_NodeInterrupt nodeFailed; + struct XmPciLpEvent_NodeInterrupt nodeRecovered; + + } eventData; + +}; + +static void intReceived(struct XmPciLpEvent *eventParm, + struct pt_regs *regsParm) +{ + int irq; + + ++Pci_Interrupt_Count; + + switch (eventParm->hvLpEvent.xSubtype) { + case XmPciLpEvent_SlotInterrupt: + irq = eventParm->hvLpEvent.xCorrelationToken; + /* Dispatch the interrupt handlers for this irq */ + ppc_irq_dispatch_handler(regsParm, irq); + HvCallPci_eoi(eventParm->eventData.slotInterrupt.busNumber, + eventParm->eventData.slotInterrupt.subBusNumber, + eventParm->eventData.slotInterrupt.deviceId); + break; + /* Ignore error recovery events for now */ + case XmPciLpEvent_BusCreated: + printk(KERN_INFO "intReceived: system bus %d created\n", + eventParm->eventData.busCreated.busNumber); + break; + case XmPciLpEvent_BusError: + case XmPciLpEvent_BusFailed: + printk(KERN_INFO "intReceived: system bus %d failed\n", + eventParm->eventData.busFailed.busNumber); + break; + case XmPciLpEvent_BusRecovered: + case XmPciLpEvent_UnQuiesceBus: + printk(KERN_INFO "intReceived: system bus %d recovered\n", + eventParm->eventData.busRecovered.busNumber); + break; + case XmPciLpEvent_NodeFailed: + case XmPciLpEvent_BridgeError: + printk(KERN_INFO + "intReceived: multi-adapter bridge %d/%d/%d failed\n", + eventParm->eventData.nodeFailed.busNumber, + eventParm->eventData.nodeFailed.subBusNumber, + eventParm->eventData.nodeFailed.deviceId); + break; + case XmPciLpEvent_NodeRecovered: + printk(KERN_INFO + "intReceived: multi-adapter bridge %d/%d/%d recovered\n", + eventParm->eventData.nodeRecovered.busNumber, + eventParm->eventData.nodeRecovered.subBusNumber, + eventParm->eventData.nodeRecovered.deviceId); + break; + default: + printk(KERN_ERR + "intReceived: unrecognized event subtype 0x%x\n", + eventParm->hvLpEvent.xSubtype); + break; + } +} + +static void XmPciLpEvent_handler(struct HvLpEvent *eventParm, + struct pt_regs *regsParm) +{ +#ifdef CONFIG_PCI + ++Pci_Event_Count; + + if (eventParm && (eventParm->xType == HvLpEvent_Type_PciIo)) { + switch (eventParm->xFlags.xFunction) { + case HvLpEvent_Function_Int: + intReceived((struct XmPciLpEvent *)eventParm, regsParm); + break; + case HvLpEvent_Function_Ack: + printk(KERN_ERR + "XmPciLpEvent_handler: unexpected ack received\n"); + break; + default: + printk(KERN_ERR + "XmPciLpEvent_handler: unexpected event function %d\n", + (int)eventParm->xFlags.xFunction); + break; + } + } else if (eventParm) + printk(KERN_ERR + "XmPciLpEvent_handler: Unrecognized PCI event type 0x%x\n", + (int)eventParm->xType); + else + printk(KERN_ERR "XmPciLpEvent_handler: NULL event received\n"); +#endif +} + +/* + * This is called by init_IRQ. set in ppc_md.init_IRQ by iSeries_setup.c + * It must be called before the bus walk. + */ +void __init iSeries_init_IRQ(void) +{ + /* Register PCI event handler and open an event path */ + int xRc; + + xRc = HvLpEvent_registerHandler(HvLpEvent_Type_PciIo, + &XmPciLpEvent_handler); + if (xRc == 0) { + xRc = HvLpEvent_openPath(HvLpEvent_Type_PciIo, 0); + if (xRc != 0) + printk(KERN_ERR "iSeries_init_IRQ: open event path " + "failed with rc 0x%x\n", xRc); + } else + printk(KERN_ERR "iSeries_init_IRQ: register handler " + "failed with rc 0x%x\n", xRc); +} + +#define REAL_IRQ_TO_BUS(irq) ((((irq) >> 6) & 0xff) + 1) +#define REAL_IRQ_TO_IDSEL(irq) ((((irq) >> 3) & 7) + 1) +#define REAL_IRQ_TO_FUNC(irq) ((irq) & 7) + +/* + * This will be called by device drivers (via enable_IRQ) + * to enable INTA in the bridge interrupt status register. + */ +static void iSeries_enable_IRQ(unsigned int irq) +{ + u32 bus, deviceId, function, mask; + const u32 subBus = 0; + unsigned int rirq = virt_irq_to_real_map[irq]; + + /* The IRQ has already been locked by the caller */ + bus = REAL_IRQ_TO_BUS(rirq); + function = REAL_IRQ_TO_FUNC(rirq); + deviceId = (REAL_IRQ_TO_IDSEL(rirq) << 4) + function; + + /* Unmask secondary INTA */ + mask = 0x80000000; + HvCallPci_unmaskInterrupts(bus, subBus, deviceId, mask); + PPCDBG(PPCDBG_BUSWALK, "iSeries_enable_IRQ 0x%02X.%02X.%02X 0x%04X\n", + bus, subBus, deviceId, irq); +} + +/* This is called by iSeries_activate_IRQs */ +static unsigned int iSeries_startup_IRQ(unsigned int irq) +{ + u32 bus, deviceId, function, mask; + const u32 subBus = 0; + unsigned int rirq = virt_irq_to_real_map[irq]; + + bus = REAL_IRQ_TO_BUS(rirq); + function = REAL_IRQ_TO_FUNC(rirq); + deviceId = (REAL_IRQ_TO_IDSEL(rirq) << 4) + function; + + /* Link the IRQ number to the bridge */ + HvCallXm_connectBusUnit(bus, subBus, deviceId, irq); + + /* Unmask bridge interrupts in the FISR */ + mask = 0x01010000 << function; + HvCallPci_unmaskFisr(bus, subBus, deviceId, mask); + iSeries_enable_IRQ(irq); + return 0; +} + +/* + * This is called out of iSeries_fixup to activate interrupt + * generation for usable slots + */ +void __init iSeries_activate_IRQs() +{ + int irq; + unsigned long flags; + + for_each_irq (irq) { + irq_desc_t *desc = get_irq_desc(irq); + + if (desc && desc->handler && desc->handler->startup) { + spin_lock_irqsave(&desc->lock, flags); + desc->handler->startup(irq); + spin_unlock_irqrestore(&desc->lock, flags); + } + } +} + +/* this is not called anywhere currently */ +static void iSeries_shutdown_IRQ(unsigned int irq) +{ + u32 bus, deviceId, function, mask; + const u32 subBus = 0; + unsigned int rirq = virt_irq_to_real_map[irq]; + + /* irq should be locked by the caller */ + bus = REAL_IRQ_TO_BUS(rirq); + function = REAL_IRQ_TO_FUNC(rirq); + deviceId = (REAL_IRQ_TO_IDSEL(rirq) << 4) + function; + + /* Invalidate the IRQ number in the bridge */ + HvCallXm_connectBusUnit(bus, subBus, deviceId, 0); + + /* Mask bridge interrupts in the FISR */ + mask = 0x01010000 << function; + HvCallPci_maskFisr(bus, subBus, deviceId, mask); +} + +/* + * This will be called by device drivers (via disable_IRQ) + * to disable INTA in the bridge interrupt status register. + */ +static void iSeries_disable_IRQ(unsigned int irq) +{ + u32 bus, deviceId, function, mask; + const u32 subBus = 0; + unsigned int rirq = virt_irq_to_real_map[irq]; + + /* The IRQ has already been locked by the caller */ + bus = REAL_IRQ_TO_BUS(rirq); + function = REAL_IRQ_TO_FUNC(rirq); + deviceId = (REAL_IRQ_TO_IDSEL(rirq) << 4) + function; + + /* Mask secondary INTA */ + mask = 0x80000000; + HvCallPci_maskInterrupts(bus, subBus, deviceId, mask); + PPCDBG(PPCDBG_BUSWALK, "iSeries_disable_IRQ 0x%02X.%02X.%02X 0x%04X\n", + bus, subBus, deviceId, irq); +} + +/* + * Need to define this so ppc_irq_dispatch_handler will NOT call + * enable_IRQ at the end of interrupt handling. However, this does + * nothing because there is not enough information provided to do + * the EOI HvCall. This is done by XmPciLpEvent.c + */ +static void iSeries_end_IRQ(unsigned int irq) +{ +} + +static hw_irq_controller iSeries_IRQ_handler = { + .typename = "iSeries irq controller", + .startup = iSeries_startup_IRQ, + .shutdown = iSeries_shutdown_IRQ, + .enable = iSeries_enable_IRQ, + .disable = iSeries_disable_IRQ, + .end = iSeries_end_IRQ +}; + +/* + * This is called out of iSeries_scan_slot to allocate an IRQ for an EADS slot + * It calculates the irq value for the slot. + * Note that subBusNumber is always 0 (at the moment at least). + */ +int __init iSeries_allocate_IRQ(HvBusNumber busNumber, + HvSubBusNumber subBusNumber, HvAgentId deviceId) +{ + unsigned int realirq, virtirq; + u8 idsel = (deviceId >> 4); + u8 function = deviceId & 7; + + virtirq = next_virtual_irq++; + realirq = ((busNumber - 1) << 6) + ((idsel - 1) << 3) + function; + virt_irq_to_real_map[virtirq] = realirq; + + irq_desc[virtirq].handler = &iSeries_IRQ_handler; + return virtirq; +} + +int virt_irq_create_mapping(unsigned int real_irq) +{ + BUG(); /* Don't call this on iSeries, yet */ + + return 0; +} + +void virt_irq_init(void) +{ + return; +} -- cgit v1.2.3