From 1bb8c6216f08519c16ce20b82e6f6a59fe0ce717 Mon Sep 17 00:00:00 2001 From: Nathan Lynch Date: Fri, 10 Aug 2007 05:18:40 +1000 Subject: [POWERPC] pa_pxp_ops: Use named structure member initializers Signed-off-by: Nathan Lynch Acked-by: Olof Johansson Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/pasemi/pci.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/powerpc/platforms/pasemi') diff --git a/arch/powerpc/platforms/pasemi/pci.c b/arch/powerpc/platforms/pasemi/pci.c index ab1f5f62bcd..882b571ba92 100644 --- a/arch/powerpc/platforms/pasemi/pci.c +++ b/arch/powerpc/platforms/pasemi/pci.c @@ -122,8 +122,8 @@ static int pa_pxp_write_config(struct pci_bus *bus, unsigned int devfn, } static struct pci_ops pa_pxp_ops = { - pa_pxp_read_config, - pa_pxp_write_config, + .read = pa_pxp_read_config, + .write = pa_pxp_write_config, }; static void __init setup_pa_pxp(struct pci_controller *hose) -- cgit v1.2.3 From b139f1fb0f1e4bfe06f2c88ba8c9a55d9513d871 Mon Sep 17 00:00:00 2001 From: Nathan Lynch Date: Fri, 10 Aug 2007 07:37:27 +1000 Subject: [POWERPC] Remove gratuitous reads from pasemi pci config space methods The pasemi pci configuration space write method reads the written location immediately after the write is performed, presumably in order to flush the write. However, configuration space writes are not allowed to be posted, making these reads gratuitous. Furthermore, this behavior potentially causes us to violate the PCI PM spec when changing between e.g. D0 and D3 states, because a delay of up to 10ms may be required before the OS accesses configuration space after the write which initiates the transition. Remove the unnecessary reads from pa_pxp_write_config. Signed-off-by: Nathan Lynch Acked-by: Olof Johansson Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/pasemi/pci.c | 3 --- 1 file changed, 3 deletions(-) (limited to 'arch/powerpc/platforms/pasemi') diff --git a/arch/powerpc/platforms/pasemi/pci.c b/arch/powerpc/platforms/pasemi/pci.c index 882b571ba92..03d1d07aa2a 100644 --- a/arch/powerpc/platforms/pasemi/pci.c +++ b/arch/powerpc/platforms/pasemi/pci.c @@ -107,15 +107,12 @@ static int pa_pxp_write_config(struct pci_bus *bus, unsigned int devfn, switch (len) { case 1: out_8(addr, val); - (void) in_8(addr); break; case 2: out_le16(addr, val); - (void) in_le16(addr); break; default: out_le32(addr, val); - (void) in_le32(addr); break; } return PCIBIOS_SUCCESSFUL; -- cgit v1.2.3 From 750d1d1ca1d2e94e15393927fd3c30222d1c5203 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Wed, 15 Aug 2007 20:58:23 +1000 Subject: [POWERPC] Fix section mismatch in pasemi/iommu.c These functions are only called by __init functions. WARNING: vmlinux.o(.text+0x56aa0): Section mismatch: reference to .init.text:.lmb_alloc (between '.iob_init' and '.iommu_init_early_pasemi') Signed-off-by: Stephen Rothwell Acked-by: Olof Johansson Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/pasemi/iommu.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/powerpc/platforms/pasemi') diff --git a/arch/powerpc/platforms/pasemi/iommu.c b/arch/powerpc/platforms/pasemi/iommu.c index f33b21b9f5d..c910ec9c2bd 100644 --- a/arch/powerpc/platforms/pasemi/iommu.c +++ b/arch/powerpc/platforms/pasemi/iommu.c @@ -187,7 +187,7 @@ static void pci_dma_dev_setup_pasemi(struct pci_dev *dev) static void pci_dma_bus_setup_null(struct pci_bus *b) { } static void pci_dma_dev_setup_null(struct pci_dev *d) { } -int iob_init(struct device_node *dn) +int __init iob_init(struct device_node *dn) { unsigned long tmp; u32 regword; @@ -233,7 +233,7 @@ int iob_init(struct device_node *dn) /* These are called very early. */ -void iommu_init_early_pasemi(void) +void __init iommu_init_early_pasemi(void) { int iommu_off; -- cgit v1.2.3 From dc559f7cd5d6d11a99b6c29402b31fbb3f3a1db0 Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Wed, 22 Aug 2007 12:26:43 +1000 Subject: [POWERPC] Rework SMP timebase handoff for pasemi Rework timebase handoff to play nice with configurations with more than 2 cores, as well as with CPU hotplug. Previous scheme just pushed out the current timebase from the giving core to all cores without caring if they wanted it or not, nor checking if they'd taken it. The taking side didn't make sure the giving side had provided a value yet either. In other words, it was completely broken. Signed-off-by: Olof Johansson Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/pasemi/setup.c | 24 ++++++++++++++---------- 1 file changed, 14 insertions(+), 10 deletions(-) (limited to 'arch/powerpc/platforms/pasemi') diff --git a/arch/powerpc/platforms/pasemi/setup.c b/arch/powerpc/platforms/pasemi/setup.c index ffe6528048b..05def6282f8 100644 --- a/arch/powerpc/platforms/pasemi/setup.c +++ b/arch/powerpc/platforms/pasemi/setup.c @@ -50,26 +50,30 @@ static void pas_restart(char *cmd) #ifdef CONFIG_SMP static DEFINE_SPINLOCK(timebase_lock); +static unsigned long timebase; static void __devinit pas_give_timebase(void) { - unsigned long tb; - spin_lock(&timebase_lock); mtspr(SPRN_TBCTL, TBCTL_FREEZE); - tb = mftb(); - mtspr(SPRN_TBCTL, TBCTL_UPDATE_LOWER | (tb & 0xffffffff)); - mtspr(SPRN_TBCTL, TBCTL_UPDATE_UPPER | (tb >> 32)); - mtspr(SPRN_TBCTL, TBCTL_RESTART); + isync(); + timebase = get_tb(); spin_unlock(&timebase_lock); - pr_debug("pas_give_timebase: cpu %d gave tb %lx\n", - smp_processor_id(), tb); + + while (timebase) + barrier(); + mtspr(SPRN_TBCTL, TBCTL_RESTART); } static void __devinit pas_take_timebase(void) { - pr_debug("pas_take_timebase: cpu %d has tb %lx\n", - smp_processor_id(), mftb()); + while (!timebase) + smp_rmb(); + + spin_lock(&timebase_lock); + set_tb(timebase >> 32, timebase & 0xffffffff); + timebase = 0; + spin_unlock(&timebase_lock); } struct smp_ops_t pas_smp_ops = { -- cgit v1.2.3 From 68c8404c742fdda2151b4bf6bd98419bf8118481 Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Wed, 5 Sep 2007 12:08:30 +1000 Subject: [POWERPC] pasemi: Add pasemi_pci_getcfgaddr() Add pasemi_pci_getcfgaddr(), to get the remapped address of a specific config register for a PCI device. Signed-off-by: Olof Johansson Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/pasemi/pasemi.h | 2 ++ arch/powerpc/platforms/pasemi/pci.c | 9 +++++++++ 2 files changed, 11 insertions(+) (limited to 'arch/powerpc/platforms/pasemi') diff --git a/arch/powerpc/platforms/pasemi/pasemi.h b/arch/powerpc/platforms/pasemi/pasemi.h index be849549761..6fd2fe75a60 100644 --- a/arch/powerpc/platforms/pasemi/pasemi.h +++ b/arch/powerpc/platforms/pasemi/pasemi.h @@ -6,6 +6,8 @@ extern void pas_pci_init(void); extern void __devinit pas_pci_irq_fixup(struct pci_dev *dev); extern void __devinit pas_pci_dma_dev_setup(struct pci_dev *dev); +extern void __iomem *pasemi_pci_getcfgaddr(struct pci_dev *dev, int offset); + extern void __init alloc_iobmap_l2(void); extern void __init pasemi_idle_init(void); diff --git a/arch/powerpc/platforms/pasemi/pci.c b/arch/powerpc/platforms/pasemi/pci.c index 03d1d07aa2a..fcfb3df3f1a 100644 --- a/arch/powerpc/platforms/pasemi/pci.c +++ b/arch/powerpc/platforms/pasemi/pci.c @@ -175,3 +175,12 @@ void __init pas_pci_init(void) /* Use the common resource allocation mechanism */ pci_probe_only = 1; } + +void __iomem *pasemi_pci_getcfgaddr(struct pci_dev *dev, int offset) +{ + struct pci_controller *hose; + + hose = pci_bus_to_host(bus); + + return pa_pxp_cfg_addr(hose, hose->number, dev->devfn, int offset) +} -- cgit v1.2.3 From 4d442331e57b7bbc28b5a20f7d069bc12e9c503e Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Wed, 5 Sep 2007 12:08:50 +1000 Subject: [POWERPC] pasemi: Add workaround for erratum 5945 Erratum 5945 causes some of the registers on the PCIe root ports to not read correctly. Do a small dance to avoid this: Write an unused register, read the value and write it back. Thankfully this is not in a hot code path. Signed-off-by: Olof Johansson Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/pasemi/pci.c | 62 +++++++++++++++++++++++++++++++++++-- 1 file changed, 60 insertions(+), 2 deletions(-) (limited to 'arch/powerpc/platforms/pasemi') diff --git a/arch/powerpc/platforms/pasemi/pci.c b/arch/powerpc/platforms/pasemi/pci.c index fcfb3df3f1a..b6a0ec45c69 100644 --- a/arch/powerpc/platforms/pasemi/pci.c +++ b/arch/powerpc/platforms/pasemi/pci.c @@ -51,6 +51,61 @@ static void volatile __iomem *pa_pxp_cfg_addr(struct pci_controller *hose, return hose->cfg_data + PA_PXP_CFA(bus, devfn, offset); } +static inline int is_root_port(int busno, int devfn) +{ + return ((busno == 0) && (PCI_FUNC(devfn) < 4) && + ((PCI_SLOT(devfn) == 16) || (PCI_SLOT(devfn) == 17))); +} + +static inline int is_5945_reg(int reg) +{ + return (((reg >= 0x18) && (reg < 0x34)) || + ((reg >= 0x158) && (reg < 0x178))); +} + +static int workaround_5945(struct pci_bus *bus, unsigned int devfn, + int offset, int len, u32 *val) +{ + struct pci_controller *hose; + void volatile __iomem *addr, *dummy; + int byte; + u32 tmp; + + if (!is_root_port(bus->number, devfn) || !is_5945_reg(offset)) + return 0; + + hose = pci_bus_to_host(bus); + + addr = pa_pxp_cfg_addr(hose, bus->number, devfn, offset & ~0x3); + byte = offset & 0x3; + + /* Workaround bug 5945: write 0 to a dummy register before reading, + * and write back what we read. We must read/write the full 32-bit + * contents so we need to shift and mask by hand. + */ + dummy = pa_pxp_cfg_addr(hose, bus->number, devfn, 0x10); + out_le32(dummy, 0); + tmp = in_le32(addr); + out_le32(addr, tmp); + + switch (len) { + case 1: + *val = (tmp >> (8*byte)) & 0xff; + break; + case 2: + if (byte == 0) + *val = tmp & 0xffff; + else + *val = (tmp >> 16) & 0xffff; + break; + default: + *val = tmp; + break; + } + + return 1; +} + static int pa_pxp_read_config(struct pci_bus *bus, unsigned int devfn, int offset, int len, u32 *val) { @@ -64,6 +119,9 @@ static int pa_pxp_read_config(struct pci_bus *bus, unsigned int devfn, if (!pa_pxp_offset_valid(bus->number, devfn, offset)) return PCIBIOS_BAD_REGISTER_NUMBER; + if (workaround_5945(bus, devfn, offset, len, val)) + return PCIBIOS_SUCCESSFUL; + addr = pa_pxp_cfg_addr(hose, bus->number, devfn, offset); /* @@ -180,7 +238,7 @@ void __iomem *pasemi_pci_getcfgaddr(struct pci_dev *dev, int offset) { struct pci_controller *hose; - hose = pci_bus_to_host(bus); + hose = pci_bus_to_host(dev->bus); - return pa_pxp_cfg_addr(hose, hose->number, dev->devfn, int offset) + return (void __iomem *)pa_pxp_cfg_addr(hose, dev->bus->number, dev->devfn, offset); } -- cgit v1.2.3 From cd7834167ffb66b470e4d9edb10efb5c1a2dfe7f Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Wed, 5 Sep 2007 12:09:23 +1000 Subject: [POWERPC] pasemi: Print more information at machine check Add printout of some SoC error status registers, and dump the SLB contents for those machine check events where it makes sense. Since we can't go about and ioremap registers at machine check time, and we generally want to do as little as possible to print out the information, pre-build a table of the registers to dump and their address in the common PCI config space range. Signed-off-by: Olof Johansson Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/pasemi/setup.c | 110 ++++++++++++++++++++++++++++++++-- 1 file changed, 106 insertions(+), 4 deletions(-) (limited to 'arch/powerpc/platforms/pasemi') diff --git a/arch/powerpc/platforms/pasemi/setup.c b/arch/powerpc/platforms/pasemi/setup.c index 05def6282f8..fe9a5d63143 100644 --- a/arch/powerpc/platforms/pasemi/setup.c +++ b/arch/powerpc/platforms/pasemi/setup.c @@ -39,8 +39,21 @@ #include "pasemi.h" +/* SDC reset register, must be pre-mapped at reset time */ static void __iomem *reset_reg; +/* Various error status registers, must be pre-mapped at MCE time */ + +#define MAX_MCE_REGS 32 +struct mce_regs { + char *name; + void __iomem *addr; +}; + +static struct mce_regs mce_regs[MAX_MCE_REGS]; +static int num_mce_regs; + + static void pas_restart(char *cmd) { printk("Restarting...\n"); @@ -106,6 +119,59 @@ void __init pas_setup_arch(void) pasemi_idle_init(); } +static int __init pas_setup_mce_regs(void) +{ + struct pci_dev *dev; + int reg; + + if (!machine_is(pasemi)) + return -ENODEV; + + /* Remap various SoC status registers for use by the MCE handler */ + + reg = 0; + + dev = pci_get_device(PCI_VENDOR_ID_PASEMI, 0xa00a, NULL); + while (dev && reg < MAX_MCE_REGS) { + mce_regs[reg].name = kasprintf(GFP_KERNEL, + "mc%d_mcdebug_errsta", reg); + mce_regs[reg].addr = pasemi_pci_getcfgaddr(dev, 0x730); + dev = pci_get_device(PCI_VENDOR_ID_PASEMI, 0xa00a, dev); + reg++; + } + + dev = pci_get_device(PCI_VENDOR_ID_PASEMI, 0xa001, NULL); + if (dev && reg+4 < MAX_MCE_REGS) { + mce_regs[reg].name = "iobdbg_IntStatus1"; + mce_regs[reg].addr = pasemi_pci_getcfgaddr(dev, 0x438); + reg++; + mce_regs[reg].name = "iobdbg_IOCTbusIntDbgReg"; + mce_regs[reg].addr = pasemi_pci_getcfgaddr(dev, 0x454); + reg++; + mce_regs[reg].name = "iobiom_IntStatus"; + mce_regs[reg].addr = pasemi_pci_getcfgaddr(dev, 0xc10); + reg++; + mce_regs[reg].name = "iobiom_IntDbgReg"; + mce_regs[reg].addr = pasemi_pci_getcfgaddr(dev, 0xc1c); + reg++; + } + + dev = pci_get_device(PCI_VENDOR_ID_PASEMI, 0xa009, NULL); + if (dev && reg+2 < MAX_MCE_REGS) { + mce_regs[reg].name = "l2csts_IntStatus"; + mce_regs[reg].addr = pasemi_pci_getcfgaddr(dev, 0x200); + reg++; + mce_regs[reg].name = "l2csts_Cnt"; + mce_regs[reg].addr = pasemi_pci_getcfgaddr(dev, 0x214); + reg++; + } + + num_mce_regs = reg; + + return 0; +} +device_initcall(pas_setup_mce_regs); + static __init void pas_init_IRQ(void) { struct device_node *np; @@ -166,25 +232,34 @@ static int pas_machine_check_handler(struct pt_regs *regs) { int cpu = smp_processor_id(); unsigned long srr0, srr1, dsisr; + int dump_slb = 0; + int i; srr0 = regs->nip; srr1 = regs->msr; dsisr = mfspr(SPRN_DSISR); printk(KERN_ERR "Machine Check on CPU %d\n", cpu); - printk(KERN_ERR "SRR0 0x%016lx SRR1 0x%016lx\n", srr0, srr1); - printk(KERN_ERR "DSISR 0x%016lx DAR 0x%016lx\n", dsisr, regs->dar); + printk(KERN_ERR "SRR0 0x%016lx SRR1 0x%016lx\n", srr0, srr1); + printk(KERN_ERR "DSISR 0x%016lx DAR 0x%016lx\n", dsisr, regs->dar); + printk(KERN_ERR "BER 0x%016lx MER 0x%016lx\n", mfspr(SPRN_PA6T_BER), + mfspr(SPRN_PA6T_MER)); + printk(KERN_ERR "IER 0x%016lx DER 0x%016lx\n", mfspr(SPRN_PA6T_IER), + mfspr(SPRN_PA6T_DER)); printk(KERN_ERR "Cause:\n"); if (srr1 & 0x200000) printk(KERN_ERR "Signalled by SDC\n"); + if (srr1 & 0x100000) { printk(KERN_ERR "Load/Store detected error:\n"); if (dsisr & 0x8000) printk(KERN_ERR "D-cache ECC double-bit error or bus error\n"); if (dsisr & 0x4000) printk(KERN_ERR "LSU snoop response error\n"); - if (dsisr & 0x2000) + if (dsisr & 0x2000) { printk(KERN_ERR "MMU SLB multi-hit or invalid B field\n"); + dump_slb = 1; + } if (dsisr & 0x1000) printk(KERN_ERR "Recoverable Duptags\n"); if (dsisr & 0x800) @@ -192,13 +267,40 @@ static int pas_machine_check_handler(struct pt_regs *regs) if (dsisr & 0x400) printk(KERN_ERR "TLB parity error count overflow\n"); } + if (srr1 & 0x80000) printk(KERN_ERR "Bus Error\n"); - if (srr1 & 0x40000) + + if (srr1 & 0x40000) { printk(KERN_ERR "I-side SLB multiple hit\n"); + dump_slb = 1; + } + if (srr1 & 0x20000) printk(KERN_ERR "I-cache parity error hit\n"); + if (num_mce_regs == 0) + printk(KERN_ERR "No MCE registers mapped yet, can't dump\n"); + else + printk(KERN_ERR "SoC debug registers:\n"); + + for (i = 0; i < num_mce_regs; i++) + printk(KERN_ERR "%s: 0x%08x\n", mce_regs[i].name, + in_le32(mce_regs[i].addr)); + + if (dump_slb) { + unsigned long e, v; + int i; + + printk(KERN_ERR "slb contents:\n"); + for (i = 0; i < SLB_NUM_ENTRIES; i++) { + asm volatile("slbmfee %0,%1" : "=r" (e) : "r" (i)); + asm volatile("slbmfev %0,%1" : "=r" (v) : "r" (i)); + printk(KERN_ERR "%02d %016lx %016lx\n", i, e, v); + } + } + + /* SRR1[62] is from MSR[62] if recoverable, so pass that back */ return !!(srr1 & 0x2); } -- cgit v1.2.3 From 3850169dbddcc9e53fd550eb093af7da5dfcefa9 Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Wed, 5 Sep 2007 12:09:45 +1000 Subject: [POWERPC] pasemi: Move pasemi_idle_init() to late_initcall() Move pasemi_idle_init() to be a late_initcall instead of being called from setup_arch(). This way the cpufreq driver has a chance to initialize and save away the boot time astate before we go to idle for the first time. Signed-off-by: Olof Johansson Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/pasemi/idle.c | 8 +++++++- arch/powerpc/platforms/pasemi/pasemi.h | 2 -- arch/powerpc/platforms/pasemi/setup.c | 2 -- 3 files changed, 7 insertions(+), 5 deletions(-) (limited to 'arch/powerpc/platforms/pasemi') diff --git a/arch/powerpc/platforms/pasemi/idle.c b/arch/powerpc/platforms/pasemi/idle.c index 3c962d5757b..d8e1fcc7851 100644 --- a/arch/powerpc/platforms/pasemi/idle.c +++ b/arch/powerpc/platforms/pasemi/idle.c @@ -72,8 +72,11 @@ static int pasemi_system_reset_exception(struct pt_regs *regs) return 1; } -void __init pasemi_idle_init(void) +static int __init pasemi_idle_init(void) { + if (!machine_is(pasemi)) + return -ENODEV; + #ifndef CONFIG_PPC_PASEMI_CPUFREQ printk(KERN_WARNING "No cpufreq driver, powersavings modes disabled\n"); current_mode = 0; @@ -82,7 +85,10 @@ void __init pasemi_idle_init(void) ppc_md.system_reset_exception = pasemi_system_reset_exception; ppc_md.power_save = modes[current_mode].entry; printk(KERN_INFO "Using PA6T idle loop (%s)\n", modes[current_mode].name); + + return 0; } +late_initcall(pasemi_idle_init); static int __init idle_param(char *p) { diff --git a/arch/powerpc/platforms/pasemi/pasemi.h b/arch/powerpc/platforms/pasemi/pasemi.h index 6fd2fe75a60..516acabb4e9 100644 --- a/arch/powerpc/platforms/pasemi/pasemi.h +++ b/arch/powerpc/platforms/pasemi/pasemi.h @@ -10,8 +10,6 @@ extern void __iomem *pasemi_pci_getcfgaddr(struct pci_dev *dev, int offset); extern void __init alloc_iobmap_l2(void); -extern void __init pasemi_idle_init(void); - /* Power savings modes, implemented in asm */ extern void idle_spin(void); extern void idle_doze(void); diff --git a/arch/powerpc/platforms/pasemi/setup.c b/arch/powerpc/platforms/pasemi/setup.c index fe9a5d63143..5ddf40a66ae 100644 --- a/arch/powerpc/platforms/pasemi/setup.c +++ b/arch/powerpc/platforms/pasemi/setup.c @@ -115,8 +115,6 @@ void __init pas_setup_arch(void) /* Remap SDC register for doing reset */ /* XXXOJN This should maybe come out of the device tree */ reset_reg = ioremap(0xfc101100, 4); - - pasemi_idle_init(); } static int __init pas_setup_mce_regs(void) -- cgit v1.2.3 From 0d72ba930cbc9140a584af7e4e65041b6c7a7d18 Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Sat, 8 Sep 2007 05:13:19 +1000 Subject: [POWERPC] Add workaround for MPICs with broken register reads Some versions of PWRficient 1682M have an interrupt controller in which the first register in each pair for interrupt sources doesn't always read with the right polarity/sense values. To work around this, keep a software copy of the register instead. Since it's not modified from the mpic itself, it's a feasible solution. Still, keep it under a config option to avoid wasting memory on other platforms. Signed-off-by: Olof Johansson Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/pasemi/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/powerpc/platforms/pasemi') diff --git a/arch/powerpc/platforms/pasemi/Kconfig b/arch/powerpc/platforms/pasemi/Kconfig index 95cd90fd81c..117d90aa500 100644 --- a/arch/powerpc/platforms/pasemi/Kconfig +++ b/arch/powerpc/platforms/pasemi/Kconfig @@ -5,6 +5,7 @@ config PPC_PASEMI select MPIC select PPC_UDBG_16550 select PPC_NATIVE + select MPIC_BROKEN_REGREAD help This option enables support for PA Semi's PWRficient line of SoC processors, including PA6T-1682M -- cgit v1.2.3 From 84dd4676f5519b86aee3bfaf1b230be2cb43f69b Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Thu, 11 Oct 2007 15:19:03 +1000 Subject: [POWERPC] Move of_platform_driver initialisations: arch/powerpc We no longer initialise the name and owner fields of the of_platform_driver, but use the fields of the embedded device_driver's name field instead. Signed-off-by: Stephen Rothwell Acked-by: Olof Johansson Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/pasemi/gpio_mdio.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'arch/powerpc/platforms/pasemi') diff --git a/arch/powerpc/platforms/pasemi/gpio_mdio.c b/arch/powerpc/platforms/pasemi/gpio_mdio.c index c91a33593bb..dae9f658122 100644 --- a/arch/powerpc/platforms/pasemi/gpio_mdio.c +++ b/arch/powerpc/platforms/pasemi/gpio_mdio.c @@ -320,10 +320,12 @@ static struct of_device_id gpio_mdio_match[] = static struct of_platform_driver gpio_mdio_driver = { - .name = "gpio-mdio-bitbang", .match_table = gpio_mdio_match, .probe = gpio_mdio_probe, .remove = gpio_mdio_remove, + .driver = { + .name = "gpio-mdio-bitbang", + }, }; int gpio_mdio_init(void) -- cgit v1.2.3