From 535f8d65d808421a6e1730990e39d41885b1f951 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Sat, 12 Nov 2005 12:10:54 -0800 Subject: [SPARC]: Fix RTC compat ioctl kernel log spam. On Fri, Nov 11, 2005 at 12:58:40PM -0800, David S. Miller wrote: > > This change: > > diff-tree 8ca2bdc7a98b9584ac5f640761501405154171c7 (from feee207e44d3643d19e648aAuthor: Christoph Hellwig > Date: Wed Nov 9 12:07:18 2005 -0800 > > [SPARC] sbus rtc: implement ->compat_ioctl > > Signed-off-by: Christoph Hellwig > Signed-off-by: David S. Miller > > results in the console now getting spewed on sparc64 systems > with messages like: > > [ 11.968298] ioctl32(hwclock:464): Unknown cmd fd(3) cmd(401c7014){00} arg(efc > What's happening is hwclock tries first the SBUS rtc device ioctls > then the normal rtc driver ones. > > So things actually worked better when we had the SBUS rtc compat ioctl > directly handled via the generic compat ioctl code. > > There are _so_ many rtc drivers in the kernel implementing the > generic rtc ioctls that I don't think putting a ->compat_ioctl > into all of them to fix this problem is feasible. Unless we > write a single rtc_compat_ioctl(), export it to modules, and hook > it into all of those somehow. > > But even that doesn't appear to have any pretty implementation. > > Any better ideas? We had similar problems with other ioctls where userspace did things like that. What we did there was to put the compat handler to generic code. The patch below does that, adding a big comment about what's going on and removing the COMPAT_IOCTL entires for these on powerpc that not only weren't ever useful but are duplicated now aswell. Signed-off-by: Christoph Hellwig Signed-off-by: David S. Miller --- arch/powerpc/kernel/ioctl32.c | 4 ---- 1 file changed, 4 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/ioctl32.c b/arch/powerpc/kernel/ioctl32.c index 3fa6a93adbd..0fa3d27fef0 100644 --- a/arch/powerpc/kernel/ioctl32.c +++ b/arch/powerpc/kernel/ioctl32.c @@ -40,10 +40,6 @@ IOCTL_TABLE_START #define DECLARES #include "compat_ioctl.c" -/* Little p (/dev/rtc, /dev/envctrl, etc.) */ -COMPATIBLE_IOCTL(_IOR('p', 20, int[7])) /* RTCGET */ -COMPATIBLE_IOCTL(_IOW('p', 21, int[7])) /* RTCSET */ - IOCTL_TABLE_END int ioctl_table_size = ARRAY_SIZE(ioctl_start); -- cgit v1.2.3 From 4c8d3d997ef3c0594350fba716529905b314287e Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Sun, 13 Nov 2005 16:06:30 -0800 Subject: [PATCH] Update email address for Kumar Changed jobs and the Freescale address is no longer valid. Signed-off-by: Kumar Gala Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/powerpc/kernel/head_fsl_booke.S | 2 +- arch/powerpc/mm/fsl_booke_mmu.c | 2 +- arch/powerpc/oprofile/op_model_fsl_booke.c | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S index 5063c603fad..8d60fa99fc4 100644 --- a/arch/powerpc/kernel/head_fsl_booke.S +++ b/arch/powerpc/kernel/head_fsl_booke.S @@ -24,7 +24,7 @@ * Copyright 2002-2004 MontaVista Software, Inc. * PowerPC 44x support, Matt Porter * Copyright 2004 Freescale Semiconductor, Inc - * PowerPC e500 modifications, Kumar Gala + * PowerPC e500 modifications, Kumar Gala * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the diff --git a/arch/powerpc/mm/fsl_booke_mmu.c b/arch/powerpc/mm/fsl_booke_mmu.c index af9ca0eb6d5..5d581bb3aa1 100644 --- a/arch/powerpc/mm/fsl_booke_mmu.c +++ b/arch/powerpc/mm/fsl_booke_mmu.c @@ -1,5 +1,5 @@ /* - * Modifications by Kumar Gala (kumar.gala@freescale.com) to support + * Modifications by Kumar Gala (galak@kernel.crashing.org) to support * E500 Book E processors. * * Copyright 2004 Freescale Semiconductor, Inc diff --git a/arch/powerpc/oprofile/op_model_fsl_booke.c b/arch/powerpc/oprofile/op_model_fsl_booke.c index 86124a94c9a..26539cda602 100644 --- a/arch/powerpc/oprofile/op_model_fsl_booke.c +++ b/arch/powerpc/oprofile/op_model_fsl_booke.c @@ -7,7 +7,7 @@ * Copyright (c) 2004 Freescale Semiconductor, Inc * * Author: Andy Fleming - * Maintainer: Kumar Gala + * Maintainer: Kumar Gala * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License -- cgit v1.2.3 From 4694ca02d19f42f5fd0b62cc2d0c7d3e5a0eef47 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Sun, 13 Nov 2005 16:06:50 -0800 Subject: [PATCH] powerpc-xmon-build-fix arch/powerpc/xmon/xmon.c:525: error: syntax error before "xmon_irq" arch/powerpc/xmon/xmon.c:526: warning: return type defaults to `int' arch/powerpc/xmon/xmon.c: In function `xmon_irq': arch/powerpc/xmon/xmon.c:532: error: `IRQ_HANDLED' undeclared (first use in this function) arch/powerpc/xmon/xmon.c:532: error: (Each undeclared identifier is reported only once arch/powerpc/xmon/xmon.c:532: error: for each function it appears in.) Cc: Paul Mackerras Cc: Benjamin Herrenschmidt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/powerpc/xmon/xmon.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c index ef4356b29a9..c45a6ad5f3b 100644 --- a/arch/powerpc/xmon/xmon.c +++ b/arch/powerpc/xmon/xmon.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include -- cgit v1.2.3 From d9ae2bad5c92cd116e3daedf16f79cf597e09ad7 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Thu, 10 Nov 2005 18:11:19 +1100 Subject: powerpc: make iSeries use generic virtual irq mapping Signed-off-by: Stephen Rothwell --- arch/powerpc/kernel/irq.c | 3 --- arch/powerpc/platforms/iseries/irq.c | 25 +++---------------------- 2 files changed, 3 insertions(+), 25 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index 4b7940693f3..5e5ed4441c6 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -311,7 +311,6 @@ void __init init_IRQ(void) } #ifdef CONFIG_PPC64 -#ifndef CONFIG_PPC_ISERIES /* * Virtual IRQ mapping code, used on systems with XICS interrupt controllers. */ @@ -420,8 +419,6 @@ unsigned int real_irq_to_virt_slowpath(unsigned int real_irq) } -#endif /* CONFIG_PPC_ISERIES */ - #ifdef CONFIG_IRQSTACKS struct thread_info *softirq_ctx[NR_CPUS]; struct thread_info *hardirq_ctx[NR_CPUS]; diff --git a/arch/powerpc/platforms/iseries/irq.c b/arch/powerpc/platforms/iseries/irq.c index 01090e9ce0c..a58daa15368 100644 --- a/arch/powerpc/platforms/iseries/irq.c +++ b/arch/powerpc/platforms/iseries/irq.c @@ -42,13 +42,6 @@ #include "irq.h" #include "call_pci.h" -/* This maps virtual irq numbers to real irqs */ -unsigned int virt_irq_to_real_map[NR_IRQS]; - -/* The next available virtual irq number */ -/* Note: the pcnet32 driver assumes irq numbers < 2 aren't valid. :( */ -static int next_virtual_irq = 2; - static long Pci_Interrupt_Count; static long Pci_Event_Count; @@ -350,26 +343,14 @@ static hw_irq_controller iSeries_IRQ_handler = { int __init iSeries_allocate_IRQ(HvBusNumber busNumber, HvSubBusNumber subBusNumber, HvAgentId deviceId) { - unsigned int realirq, virtirq; + int virtirq; + unsigned int realirq; u8 idsel = (deviceId >> 4); u8 function = deviceId & 7; - virtirq = next_virtual_irq++; realirq = ((busNumber - 1) << 6) + ((idsel - 1) << 3) + function; - virt_irq_to_real_map[virtirq] = realirq; + virtirq = virt_irq_create_mapping(realirq); irq_desc[virtirq].handler = &iSeries_IRQ_handler; return virtirq; } - -int virt_irq_create_mapping(unsigned int real_irq) -{ - BUG(); /* Don't call this on iSeries, yet */ - - return 0; -} - -void virt_irq_init(void) -{ - return; -} -- cgit v1.2.3 From 868accb7b9126dffdebb6b45631e145991e3535d Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Thu, 10 Nov 2005 18:38:46 +1100 Subject: powerpc: have only one definition of __irq_offset_value Signed-off-by: Stephen Rothwell --- arch/powerpc/kernel/irq.c | 6 +++++- arch/powerpc/kernel/setup_32.c | 4 ---- 2 files changed, 5 insertions(+), 5 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index 5e5ed4441c6..5a71ed9612f 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -71,6 +71,11 @@ #include #endif +int __irq_offset_value; +#ifdef CONFIG_PPC32 +EXPORT_SYMBOL(__irq_offset_value); +#endif + static int ppc_spurious_interrupts; #if defined(CONFIG_PPC_ISERIES) && defined(CONFIG_SMP) @@ -98,7 +103,6 @@ extern atomic_t ipi_sent; EXPORT_SYMBOL(irq_desc); int distribute_irqs = 1; -int __irq_offset_value; u64 ppc64_interrupt_controller; #endif /* CONFIG_PPC64 */ diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c index c98cfcc9cd9..e5694335bf1 100644 --- a/arch/powerpc/kernel/setup_32.c +++ b/arch/powerpc/kernel/setup_32.c @@ -57,10 +57,6 @@ extern void power4_idle(void); boot_infos_t *boot_infos; struct ide_machdep_calls ppc_ide_md; -/* XXX should go elsewhere */ -int __irq_offset_value; -EXPORT_SYMBOL(__irq_offset_value); - int boot_cpuid; EXPORT_SYMBOL_GPL(boot_cpuid); int boot_cpuid_phys; -- cgit v1.2.3 From c5e24354efae9f962e0e369d875d45f47e0bb9aa Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Sat, 12 Nov 2005 00:06:05 +1100 Subject: [PATCH] powerpc: Turn cpu_irq_down into kexec_cpu_down We currently have a ppc_md member called cpu_irq_down, which disables IRQs for the cpu in question. The only caller of cpu_irq_down is the kexec code. On pSeries we need to do more than just teardown IRQs at kexec time, so rename the ppc_md member to kexec_cpu_down and expand it. The pSeries code needs to know, and other platforms might too, whether we're doing a crash shutdown (ie. panicking) or a regular kexec, so add a flag for that. The pSeries implementation of kexec_cpu_down does an unregister VPA call, which tells the Hypervisor to stop writing stuff into our pacas. Without this we can get weird memory corruption bugs when we kexec, caused by the Hypervisor writing into the first kernel's pacas which happens to be somewhere interesting in the second kernel's memory. Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/pseries/setup.c | 26 ++++++++++++++++++++++++-- 1 file changed, 24 insertions(+), 2 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index 31990829310..b9d9732b2e0 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -200,14 +200,12 @@ static void __init pSeries_setup_arch(void) if (ppc64_interrupt_controller == IC_OPEN_PIC) { ppc_md.init_IRQ = pSeries_init_mpic; ppc_md.get_irq = mpic_get_irq; - ppc_md.cpu_irq_down = mpic_teardown_this_cpu; /* Allocate the mpic now, so that find_and_init_phbs() can * fill the ISUs */ pSeries_setup_mpic(); } else { ppc_md.init_IRQ = xics_init_IRQ; ppc_md.get_irq = xics_get_irq; - ppc_md.cpu_irq_down = xics_teardown_cpu; } #ifdef CONFIG_SMP @@ -595,6 +593,27 @@ static int pSeries_pci_probe_mode(struct pci_bus *bus) return PCI_PROBE_NORMAL; } +#ifdef CONFIG_KEXEC +static void pseries_kexec_cpu_down(int crash_shutdown, int secondary) +{ + /* Don't risk a hypervisor call if we're crashing */ + if (!crash_shutdown) { + unsigned long vpa = __pa(&get_paca()->lppaca); + + if (unregister_vpa(hard_smp_processor_id(), vpa)) { + printk("VPA deregistration of cpu %u (hw_cpu_id %d) " + "failed\n", smp_processor_id(), + hard_smp_processor_id()); + } + } + + if (ppc64_interrupt_controller == IC_OPEN_PIC) + mpic_teardown_this_cpu(secondary); + else + xics_teardown_cpu(secondary); +} +#endif + struct machdep_calls __initdata pSeries_md = { .probe = pSeries_probe, .setup_arch = pSeries_setup_arch, @@ -617,4 +636,7 @@ struct machdep_calls __initdata pSeries_md = { .check_legacy_ioport = pSeries_check_legacy_ioport, .system_reset_exception = pSeries_system_reset_exception, .machine_check_exception = pSeries_machine_check_exception, +#ifdef CONFIG_KEXEC + .kexec_cpu_down = pseries_kexec_cpu_down, +#endif }; -- cgit v1.2.3 From 593e537b93193d1696809817533ce5ad510445b1 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Sat, 12 Nov 2005 00:06:06 +1100 Subject: [PATCH] powerpc: Export htab start/end via device tree The userspace kexec-tools need to know the location of the htab on non-lpar machines, as well as the end of the kernel. Export via the device tree. NB. This patch has been updated to use "linux,x" property names. You may need to update your kexec-tools to match. Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/setup_64.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index fdbd9f9122f..608fee7c7e2 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -59,6 +59,7 @@ #include #include #include +#include #include "setup.h" @@ -415,6 +416,10 @@ void __init setup_system(void) */ unflatten_device_tree(); +#ifdef CONFIG_KEXEC + kexec_setup(); /* requires unflattened device tree. */ +#endif + /* * Fill the ppc64_caches & systemcfg structures with informations * retreived from the device-tree. Need to be called before -- cgit v1.2.3 From 50092b233afa96b4c9a4b24ac38199c34e0880cd Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Mon, 14 Nov 2005 11:02:20 +1100 Subject: [PATCH] powerpc: Always rebuild arch/powerpc/include/asm symlink This patch uses a FORCE dependency on the arch/powerpc/include/asm symlink so that it always gets rebuilt, thus avoiding all sort of funny errors if the .config is changed between 32 and 64 bits. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index 5bc11bd36c1..d41ad2e675d 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -187,7 +187,7 @@ archprepare: checkbin # Temporary hack until we have migrated to asm-powerpc include/asm: arch/$(ARCH)/include/asm -arch/$(ARCH)/include/asm: +arch/$(ARCH)/include/asm: FORCE $(Q)if [ ! -d arch/$(ARCH)/include ]; then mkdir -p arch/$(ARCH)/include; fi $(Q)ln -fsn $(srctree)/include/asm-$(OLDARCH) arch/$(ARCH)/include/asm -- cgit v1.2.3 From 0c37ec2aa88bd8a6aaeb284ff5c86f4c6d8e8469 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Mon, 14 Nov 2005 14:55:58 +1100 Subject: [PATCH] powerpc: vdso fixes (take #2) This fixes various errors in the new functions added in the vDSO's, I've now verified all functions on both 32 and 64 bits vDSOs. It also fix a sign extension bug getting the initial time of day at boot that could cause the monotonic clock value to be completely on bogus for 64 bits applications (with either the vDSO or the syscall) on powermacs. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/asm-offsets.c | 6 ++++-- arch/powerpc/kernel/vdso32/datapage.S | 3 ++- arch/powerpc/kernel/vdso32/gettimeofday.S | 12 ++++++++---- arch/powerpc/kernel/vdso64/datapage.S | 1 + arch/powerpc/kernel/vdso64/gettimeofday.S | 31 +++++++++++++++++++------------ arch/powerpc/platforms/powermac/time.c | 8 ++++---- 6 files changed, 38 insertions(+), 23 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c index 4550eb4f4fb..91538d2445b 100644 --- a/arch/powerpc/kernel/asm-offsets.c +++ b/arch/powerpc/kernel/asm-offsets.c @@ -270,13 +270,15 @@ int main(void) DEFINE(TVAL64_TV_USEC, offsetof(struct timeval, tv_usec)); DEFINE(TVAL32_TV_SEC, offsetof(struct compat_timeval, tv_sec)); DEFINE(TVAL32_TV_USEC, offsetof(struct compat_timeval, tv_usec)); + DEFINE(TSPC64_TV_SEC, offsetof(struct timespec, tv_sec)); + DEFINE(TSPC64_TV_NSEC, offsetof(struct timespec, tv_nsec)); DEFINE(TSPC32_TV_SEC, offsetof(struct compat_timespec, tv_sec)); DEFINE(TSPC32_TV_NSEC, offsetof(struct compat_timespec, tv_nsec)); #else DEFINE(TVAL32_TV_SEC, offsetof(struct timeval, tv_sec)); DEFINE(TVAL32_TV_USEC, offsetof(struct timeval, tv_usec)); - DEFINE(TSPEC32_TV_SEC, offsetof(struct timespec, tv_sec)); - DEFINE(TSPEC32_TV_NSEC, offsetof(struct timespec, tv_nsec)); + DEFINE(TSPC32_TV_SEC, offsetof(struct timespec, tv_sec)); + DEFINE(TSPC32_TV_NSEC, offsetof(struct timespec, tv_nsec)); #endif /* timeval/timezone offsets for use by vdso */ DEFINE(TZONE_TZ_MINWEST, offsetof(struct timezone, tz_minuteswest)); diff --git a/arch/powerpc/kernel/vdso32/datapage.S b/arch/powerpc/kernel/vdso32/datapage.S index a08c26e8783..f6b38472318 100644 --- a/arch/powerpc/kernel/vdso32/datapage.S +++ b/arch/powerpc/kernel/vdso32/datapage.S @@ -77,8 +77,9 @@ V_FUNCTION_BEGIN(__kernel_get_tbfreq) mflr r12 .cfi_register lr,r12 bl __get_datapage@local - lwz r3,CFG_TB_TICKS_PER_SEC(r3) lwz r4,(CFG_TB_TICKS_PER_SEC + 4)(r3) + lwz r3,CFG_TB_TICKS_PER_SEC(r3) mtlr r12 + blr .cfi_endproc V_FUNCTION_END(__kernel_get_tbfreq) diff --git a/arch/powerpc/kernel/vdso32/gettimeofday.S b/arch/powerpc/kernel/vdso32/gettimeofday.S index aeb5fc9b87b..0a32a41d50b 100644 --- a/arch/powerpc/kernel/vdso32/gettimeofday.S +++ b/arch/powerpc/kernel/vdso32/gettimeofday.S @@ -83,7 +83,7 @@ V_FUNCTION_BEGIN(__kernel_clock_gettime) /* Check for supported clock IDs */ cmpli cr0,r3,CLOCK_REALTIME cmpli cr1,r3,CLOCK_MONOTONIC - cror cr0,cr0,cr1 + cror cr0*4+eq,cr0*4+eq,cr1*4+eq bne cr0,99f mflr r12 /* r12 saves lr */ @@ -91,7 +91,7 @@ V_FUNCTION_BEGIN(__kernel_clock_gettime) mr r10,r3 /* r10 saves id */ mr r11,r4 /* r11 saves tp */ bl __get_datapage@local /* get data page */ - mr r9, r3 /* datapage ptr in r9 */ + mr r9,r3 /* datapage ptr in r9 */ beq cr1,50f /* if monotonic -> jump there */ /* @@ -173,10 +173,14 @@ V_FUNCTION_BEGIN(__kernel_clock_gettime) add r4,r4,r7 lis r5,NSEC_PER_SEC@h ori r5,r5,NSEC_PER_SEC@l - cmpli cr0,r4,r5 + cmpl cr0,r4,r5 + cmpli cr1,r4,0 blt 1f subf r4,r5,r4 addi r3,r3,1 +1: bge cr1,1f + addi r3,r3,-1 + add r4,r4,r5 1: stw r3,TSPC32_TV_SEC(r11) stw r4,TSPC32_TV_NSEC(r11) @@ -210,7 +214,7 @@ V_FUNCTION_BEGIN(__kernel_clock_getres) /* Check for supported clock IDs */ cmpwi cr0,r3,CLOCK_REALTIME cmpwi cr1,r3,CLOCK_MONOTONIC - cror cr0,cr0,cr1 + cror cr0*4+eq,cr0*4+eq,cr1*4+eq bne cr0,99f li r3,0 diff --git a/arch/powerpc/kernel/vdso64/datapage.S b/arch/powerpc/kernel/vdso64/datapage.S index e67eda0f8cd..6393e4137bc 100644 --- a/arch/powerpc/kernel/vdso64/datapage.S +++ b/arch/powerpc/kernel/vdso64/datapage.S @@ -80,5 +80,6 @@ V_FUNCTION_BEGIN(__kernel_get_tbfreq) bl V_LOCAL_FUNC(__get_datapage) ld r3,CFG_TB_TICKS_PER_SEC(r3) mtlr r12 + blr .cfi_endproc V_FUNCTION_END(__kernel_get_tbfreq) diff --git a/arch/powerpc/kernel/vdso64/gettimeofday.S b/arch/powerpc/kernel/vdso64/gettimeofday.S index d371c02a8c0..1a89094715c 100644 --- a/arch/powerpc/kernel/vdso64/gettimeofday.S +++ b/arch/powerpc/kernel/vdso64/gettimeofday.S @@ -1,4 +1,5 @@ -/* + + /* * Userland implementation of gettimeofday() for 64 bits processes in a * ppc64 kernel for use in the vDSO * @@ -68,7 +69,7 @@ V_FUNCTION_BEGIN(__kernel_clock_gettime) /* Check for supported clock IDs */ cmpwi cr0,r3,CLOCK_REALTIME cmpwi cr1,r3,CLOCK_MONOTONIC - cror cr0,cr0,cr1 + cror cr0*4+eq,cr0*4+eq,cr1*4+eq bne cr0,99f mflr r12 /* r12 saves lr */ @@ -84,16 +85,17 @@ V_FUNCTION_BEGIN(__kernel_clock_gettime) bl V_LOCAL_FUNC(__do_get_xsec) /* get xsec from tb & kernel */ - lis r7,0x3b9a /* r7 = 1000000000 = NSEC_PER_SEC */ - ori r7,r7,0xca00 + lis r7,15 /* r7 = 1000000 = USEC_PER_SEC */ + ori r7,r7,16960 rldicl r5,r4,44,20 /* r5 = sec = xsec / XSEC_PER_SEC */ rldicr r6,r5,20,43 /* r6 = sec * XSEC_PER_SEC */ std r5,TSPC64_TV_SEC(r11) /* store sec in tv */ subf r0,r6,r4 /* r0 = xsec = (xsec - r6) */ - mulld r0,r0,r7 /* nsec = (xsec * NSEC_PER_SEC) / + mulld r0,r0,r7 /* usec = (xsec * USEC_PER_SEC) / * XSEC_PER_SEC */ rldicl r0,r0,44,20 + mulli r0,r0,1000 /* nsec = usec * 1000 */ std r0,TSPC64_TV_NSEC(r11) /* store nsec in tp */ mtlr r12 @@ -106,15 +108,16 @@ V_FUNCTION_BEGIN(__kernel_clock_gettime) 50: bl V_LOCAL_FUNC(__do_get_xsec) /* get xsec from tb & kernel */ - lis r7,0x3b9a /* r7 = 1000000000 = NSEC_PER_SEC */ - ori r7,r7,0xca00 + lis r7,15 /* r7 = 1000000 = USEC_PER_SEC */ + ori r7,r7,16960 rldicl r5,r4,44,20 /* r5 = sec = xsec / XSEC_PER_SEC */ rldicr r6,r5,20,43 /* r6 = sec * XSEC_PER_SEC */ subf r0,r6,r4 /* r0 = xsec = (xsec - r6) */ - mulld r0,r0,r7 /* nsec = (xsec * NSEC_PER_SEC) / + mulld r0,r0,r7 /* usec = (xsec * USEC_PER_SEC) / * XSEC_PER_SEC */ rldicl r6,r0,44,20 + mulli r6,r6,1000 /* nsec = usec * 1000 */ /* now we must fixup using wall to monotonic. We need to snapshot * that value and do the counter trick again. Fortunately, we still @@ -123,8 +126,8 @@ V_FUNCTION_BEGIN(__kernel_clock_gettime) * can be used */ - lwz r4,WTOM_CLOCK_SEC(r9) - lwz r7,WTOM_CLOCK_NSEC(r9) + lwa r4,WTOM_CLOCK_SEC(r3) + lwa r7,WTOM_CLOCK_NSEC(r3) /* We now have our result in r4,r7. We create a fake dependency * on that result and re-check the counter @@ -144,10 +147,14 @@ V_FUNCTION_BEGIN(__kernel_clock_gettime) add r7,r7,r6 lis r9,NSEC_PER_SEC@h ori r9,r9,NSEC_PER_SEC@l - cmpli cr0,r7,r9 + cmpl cr0,r7,r9 + cmpli cr1,r7,0 blt 1f subf r7,r9,r7 addi r4,r4,1 +1: bge cr1,1f + addi r4,r4,-1 + add r7,r7,r9 1: std r4,TSPC64_TV_SEC(r11) std r7,TSPC64_TV_NSEC(r11) @@ -181,7 +188,7 @@ V_FUNCTION_BEGIN(__kernel_clock_getres) /* Check for supported clock IDs */ cmpwi cr0,r3,CLOCK_REALTIME cmpwi cr1,r3,CLOCK_MONOTONIC - cror cr0,cr0,cr1 + cror cr0*4+eq,cr0*4+eq,cr1*4+eq bne cr0,99f li r3,0 diff --git a/arch/powerpc/platforms/powermac/time.c b/arch/powerpc/platforms/powermac/time.c index 5947b21a858..4c7682a6522 100644 --- a/arch/powerpc/platforms/powermac/time.c +++ b/arch/powerpc/platforms/powermac/time.c @@ -102,7 +102,7 @@ static unsigned long from_rtc_time(struct rtc_time *tm) static unsigned long cuda_get_time(void) { struct adb_request req; - unsigned long now; + unsigned int now; if (cuda_request(&req, NULL, 2, CUDA_PACKET, CUDA_GET_TIME) < 0) return 0; @@ -113,7 +113,7 @@ static unsigned long cuda_get_time(void) req.reply_len); now = (req.reply[3] << 24) + (req.reply[4] << 16) + (req.reply[5] << 8) + req.reply[6]; - return now - RTC_OFFSET; + return ((unsigned long)now) - RTC_OFFSET; } #define cuda_get_rtc_time(tm) to_rtc_time(cuda_get_time(), (tm)) @@ -146,7 +146,7 @@ static int cuda_set_rtc_time(struct rtc_time *tm) static unsigned long pmu_get_time(void) { struct adb_request req; - unsigned long now; + unsigned int now; if (pmu_request(&req, NULL, 1, PMU_READ_RTC) < 0) return 0; @@ -156,7 +156,7 @@ static unsigned long pmu_get_time(void) req.reply_len); now = (req.reply[0] << 24) + (req.reply[1] << 16) + (req.reply[2] << 8) + req.reply[3]; - return now - RTC_OFFSET; + return ((unsigned long)now) - RTC_OFFSET; } #define pmu_get_rtc_time(tm) to_rtc_time(pmu_get_time(), (tm)) -- cgit v1.2.3 From 3136254ca5dfaf53486f7032c674f9b6d7fd1d53 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Mon, 14 Nov 2005 15:49:48 +1100 Subject: [PATCH] powerpc: kill ppc64 rtc.c, use genrtc instead This moves the rtas RTC callbacks to rtas-rtc.c in arch/powerpc/kernel, and kills the rest of arch/ppc64/kernel/rtc.c which was just a duplicate of the genrtc functionality. Also enable build of genrtc for CONFIG_PPC64 (it just works are we already have the required callbacks) and enable it in all defconfigs. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/configs/pseries_defconfig | 206 +++++++++++++++++++++------------ arch/powerpc/kernel/Makefile | 2 +- arch/powerpc/kernel/rtas-rtc.c | 105 +++++++++++++++++ arch/powerpc/platforms/powermac/time.c | 2 +- 4 files changed, 238 insertions(+), 77 deletions(-) create mode 100644 arch/powerpc/kernel/rtas-rtc.c (limited to 'arch/powerpc') diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig index 9f09dff9e11..913962c1dae 100644 --- a/arch/powerpc/configs/pseries_defconfig +++ b/arch/powerpc/configs/pseries_defconfig @@ -1,18 +1,33 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc4 -# Thu Oct 20 08:32:17 2005 +# Linux kernel version: 2.6.15-rc1 +# Mon Nov 14 15:27:00 2005 # +CONFIG_PPC64=y CONFIG_64BIT=y +CONFIG_PPC_MERGE=y CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_ISA_DMA=y +CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_COMPAT=y +CONFIG_SYSVIPC_COMPAT=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_FORCE_MAX_ZONEORDER=13 + +# +# Processor support +# +# CONFIG_POWER4_ONLY is not set +CONFIG_POWER3=y +CONFIG_POWER4=y +CONFIG_PPC_FPU=y +CONFIG_ALTIVEC=y +CONFIG_PPC_STD_MMU=y +CONFIG_SMP=y +CONFIG_NR_CPUS=128 # # Code maturity level options @@ -68,75 +83,103 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y CONFIG_STOP_MACHINE=y -CONFIG_SYSVIPC_COMPAT=y + +# +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" # # Platform support # -# CONFIG_PPC_ISERIES is not set CONFIG_PPC_MULTIPLATFORM=y +# CONFIG_PPC_ISERIES is not set +# CONFIG_EMBEDDED6xx is not set +# CONFIG_APUS is not set CONFIG_PPC_PSERIES=y -# CONFIG_PPC_BPA is not set # CONFIG_PPC_PMAC is not set # CONFIG_PPC_MAPLE is not set -CONFIG_PPC=y -CONFIG_PPC64=y +# CONFIG_PPC_CELL is not set CONFIG_PPC_OF=y CONFIG_XICS=y +# CONFIG_U3_DART is not set CONFIG_MPIC=y -CONFIG_ALTIVEC=y -CONFIG_PPC_SPLPAR=y -CONFIG_KEXEC=y +CONFIG_PPC_RTAS=y +CONFIG_RTAS_ERROR_LOGGING=y +CONFIG_RTAS_PROC=y +CONFIG_RTAS_FLASH=m +# CONFIG_MMIO_NVRAM is not set CONFIG_IBMVIO=y -# CONFIG_U3_DART is not set -# CONFIG_BOOTX_TEXT is not set -# CONFIG_POWER4_ONLY is not set +# CONFIG_PPC_MPC106 is not set +# CONFIG_GENERIC_TBSYNC is not set +# CONFIG_CPU_FREQ is not set +# CONFIG_WANT_EARLY_SERIAL is not set + +# +# Kernel options +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +# CONFIG_PREEMPT_BKL is not set +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_IOMMU_VMERGE=y -CONFIG_SMP=y -CONFIG_NR_CPUS=128 +CONFIG_HOTPLUG_CPU=y +CONFIG_KEXEC=y +# CONFIG_IRQ_ALL_CPUS is not set +CONFIG_PPC_SPLPAR=y +CONFIG_EEH=y +CONFIG_SCANLOG=m +CONFIG_LPARCFG=y +CONFIG_NUMA=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_ARCH_DISCONTIGMEM_ENABLE=y -CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y CONFIG_SELECT_MEMORY_MODEL=y # CONFIG_FLATMEM_MANUAL is not set -CONFIG_DISCONTIGMEM_MANUAL=y -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_DISCONTIGMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +CONFIG_SPARSEMEM_MANUAL=y +CONFIG_SPARSEMEM=y CONFIG_NEED_MULTIPLE_NODES=y +CONFIG_HAVE_MEMORY_PRESENT=y # CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPARSEMEM_EXTREME=y +# CONFIG_MEMORY_HOTPLUG is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y CONFIG_NODES_SPAN_OTHER_NODES=y -CONFIG_NUMA=y +# CONFIG_PPC_64K_PAGES is not set CONFIG_SCHED_SMT=y -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -# CONFIG_PREEMPT_BKL is not set -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_EEH=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_PPC_RTAS=y -CONFIG_RTAS_PROC=y -CONFIG_RTAS_FLASH=m -CONFIG_SCANLOG=m -CONFIG_LPARCFG=y -CONFIG_SECCOMP=y -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -CONFIG_HOTPLUG_CPU=y CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y # -# Bus Options +# Bus options # +CONFIG_GENERIC_ISA_DMA=y +CONFIG_PPC_I8259=y +# CONFIG_PPC_INDIRECT_PCI is not set CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_LEGACY_PROC=y @@ -156,6 +199,7 @@ CONFIG_HOTPLUG_PCI=m # CONFIG_HOTPLUG_PCI_SHPC is not set CONFIG_HOTPLUG_PCI_RPA=m CONFIG_HOTPLUG_PCI_RPA_DLPAR=m +CONFIG_KERNEL_START=0xc000000000000000 # # Networking @@ -197,6 +241,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# CONFIG_NETFILTER_NETLINK=y CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m @@ -299,6 +347,10 @@ CONFIG_LLC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y @@ -368,14 +420,6 @@ CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=65536 CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # @@ -473,6 +517,7 @@ CONFIG_SCSI_ISCSI_ATTRS=m # # SCSI low-level drivers # +# CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -559,6 +604,7 @@ CONFIG_DM_MULTIPATH_EMC=m # # Macintosh device drivers # +# CONFIG_WINDFARM is not set # # Network device support @@ -645,7 +691,6 @@ CONFIG_IXGB=m # CONFIG_IXGB_NAPI is not set CONFIG_S2IO=m # CONFIG_S2IO_NAPI is not set -# CONFIG_2BUFF_MODE is not set # # Token Ring devices @@ -674,6 +719,7 @@ CONFIG_PPP_ASYNC=m CONFIG_PPP_SYNC_TTY=m CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +# CONFIG_PPP_MPPE is not set CONFIG_PPPOE=m # CONFIG_SLIP is not set # CONFIG_NET_FC is not set @@ -784,6 +830,8 @@ CONFIG_HVCS=m # # CONFIG_WATCHDOG is not set # CONFIG_RTC is not set +CONFIG_GEN_RTC=y +# CONFIG_GEN_RTC_X is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -801,6 +849,7 @@ CONFIG_MAX_RAW_DEVS=1024 # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -852,6 +901,7 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set # CONFIG_SENSORS_MAX6875 is not set +# CONFIG_RTC_X1205_I2C is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -893,7 +943,6 @@ CONFIG_FB=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y -CONFIG_FB_SOFT_CURSOR=y CONFIG_FB_MACMODES=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y @@ -905,6 +954,7 @@ CONFIG_FB_OF=y # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set # CONFIG_FB_VGA16 is not set +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set CONFIG_FB_MATROX=y @@ -927,7 +977,6 @@ CONFIG_FB_RADEON_I2C=y # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_CYBLA is not set # CONFIG_FB_TRIDENT is not set -# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # @@ -936,6 +985,7 @@ CONFIG_FB_RADEON_I2C=y # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y @@ -990,12 +1040,15 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # USB Device Class drivers # -# CONFIG_USB_BLUETOOTH_TTY is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -1106,6 +1159,7 @@ CONFIG_INFINIBAND_MTHCA=m # CONFIG_INFINIBAND_MTHCA_DEBUG is not set CONFIG_INFINIBAND_IPOIB=m # CONFIG_INFINIBAND_IPOIB_DEBUG is not set +# CONFIG_INFINIBAND_SRP is not set # # SN Devices @@ -1288,10 +1342,25 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_UTF8 is not set # -# Profiling support +# Library routines +# +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m + +# +# Instrumentation Support # CONFIG_PROFILING=y CONFIG_OPROFILE=y +# CONFIG_KPROBES is not set # # Kernel hacking @@ -1308,14 +1377,15 @@ CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set CONFIG_DEBUG_FS=y +# CONFIG_DEBUG_VM is not set +# CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUG_STACKOVERFLOW=y -# CONFIG_KPROBES is not set CONFIG_DEBUG_STACK_USAGE=y CONFIG_DEBUGGER=y CONFIG_XMON=y CONFIG_XMON_DEFAULT=y -# CONFIG_PPCDBG is not set CONFIG_IRQSTACKS=y +# CONFIG_BOOTX_TEXT is not set # # Security options @@ -1355,17 +1425,3 @@ CONFIG_CRYPTO_TEST=m # # Hardware crypto devices # - -# -# Library routines -# -CONFIG_CRC_CCITT=m -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=m -CONFIG_TEXTSEARCH=y -CONFIG_TEXTSEARCH_KMP=m -CONFIG_TEXTSEARCH_BM=m -CONFIG_TEXTSEARCH_FSM=m diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index 9a74b7ab03a..046b4bf1f21 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -25,7 +25,7 @@ obj-$(CONFIG_PPC_OF) += of_device.o procfs-$(CONFIG_PPC64) := proc_ppc64.o obj-$(CONFIG_PROC_FS) += $(procfs-y) rtaspci-$(CONFIG_PPC64) := rtas_pci.o -obj-$(CONFIG_PPC_RTAS) += rtas.o $(rtaspci-y) +obj-$(CONFIG_PPC_RTAS) += rtas.o rtas-rtc.o $(rtaspci-y) obj-$(CONFIG_RTAS_FLASH) += rtas_flash.o obj-$(CONFIG_RTAS_PROC) += rtas-proc.o obj-$(CONFIG_LPARCFG) += lparcfg.o diff --git a/arch/powerpc/kernel/rtas-rtc.c b/arch/powerpc/kernel/rtas-rtc.c new file mode 100644 index 00000000000..7b948662704 --- /dev/null +++ b/arch/powerpc/kernel/rtas-rtc.c @@ -0,0 +1,105 @@ +#include +#include +#include +#include +#include +#include +#include +#include +#include + + +#define MAX_RTC_WAIT 5000 /* 5 sec */ +#define RTAS_CLOCK_BUSY (-2) +unsigned long __init rtas_get_boot_time(void) +{ + int ret[8]; + int error, wait_time; + unsigned long max_wait_tb; + + max_wait_tb = get_tb() + tb_ticks_per_usec * 1000 * MAX_RTC_WAIT; + do { + error = rtas_call(rtas_token("get-time-of-day"), 0, 8, ret); + if (error == RTAS_CLOCK_BUSY || rtas_is_extended_busy(error)) { + wait_time = rtas_extended_busy_delay_time(error); + /* This is boot time so we spin. */ + udelay(wait_time*1000); + error = RTAS_CLOCK_BUSY; + } + } while (error == RTAS_CLOCK_BUSY && (get_tb() < max_wait_tb)); + + if (error != 0 && printk_ratelimit()) { + printk(KERN_WARNING "error: reading the clock failed (%d)\n", + error); + return 0; + } + + return mktime(ret[0], ret[1], ret[2], ret[3], ret[4], ret[5]); +} + +/* NOTE: get_rtc_time will get an error if executed in interrupt context + * and if a delay is needed to read the clock. In this case we just + * silently return without updating rtc_tm. + */ +void rtas_get_rtc_time(struct rtc_time *rtc_tm) +{ + int ret[8]; + int error, wait_time; + unsigned long max_wait_tb; + + max_wait_tb = get_tb() + tb_ticks_per_usec * 1000 * MAX_RTC_WAIT; + do { + error = rtas_call(rtas_token("get-time-of-day"), 0, 8, ret); + if (error == RTAS_CLOCK_BUSY || rtas_is_extended_busy(error)) { + if (in_interrupt() && printk_ratelimit()) { + memset(&rtc_tm, 0, sizeof(struct rtc_time)); + printk(KERN_WARNING "error: reading clock" + " would delay interrupt\n"); + return; /* delay not allowed */ + } + wait_time = rtas_extended_busy_delay_time(error); + msleep(wait_time); + error = RTAS_CLOCK_BUSY; + } + } while (error == RTAS_CLOCK_BUSY && (get_tb() < max_wait_tb)); + + if (error != 0 && printk_ratelimit()) { + printk(KERN_WARNING "error: reading the clock failed (%d)\n", + error); + return; + } + + rtc_tm->tm_sec = ret[5]; + rtc_tm->tm_min = ret[4]; + rtc_tm->tm_hour = ret[3]; + rtc_tm->tm_mday = ret[2]; + rtc_tm->tm_mon = ret[1] - 1; + rtc_tm->tm_year = ret[0] - 1900; +} + +int rtas_set_rtc_time(struct rtc_time *tm) +{ + int error, wait_time; + unsigned long max_wait_tb; + + max_wait_tb = get_tb() + tb_ticks_per_usec * 1000 * MAX_RTC_WAIT; + do { + error = rtas_call(rtas_token("set-time-of-day"), 7, 1, NULL, + tm->tm_year + 1900, tm->tm_mon + 1, + tm->tm_mday, tm->tm_hour, tm->tm_min, + tm->tm_sec, 0); + if (error == RTAS_CLOCK_BUSY || rtas_is_extended_busy(error)) { + if (in_interrupt()) + return 1; /* probably decrementer */ + wait_time = rtas_extended_busy_delay_time(error); + msleep(wait_time); + error = RTAS_CLOCK_BUSY; + } + } while (error == RTAS_CLOCK_BUSY && (get_tb() < max_wait_tb)); + + if (error != 0 && printk_ratelimit()) + printk(KERN_WARNING "error: setting the clock failed (%d)\n", + error); + + return 0; +} diff --git a/arch/powerpc/platforms/powermac/time.c b/arch/powerpc/platforms/powermac/time.c index 4c7682a6522..b1714f9bd92 100644 --- a/arch/powerpc/platforms/powermac/time.c +++ b/arch/powerpc/platforms/powermac/time.c @@ -199,7 +199,7 @@ static unsigned long smu_get_time(void) #define smu_set_rtc_time(tm, spin) 0 #endif -unsigned long pmac_get_boot_time(void) +unsigned long __init pmac_get_boot_time(void) { /* Get the time from the RTC, used only at boot time */ switch (sys_ctrler) { -- cgit v1.2.3 From d7867959e7e928ab52ef204e2559937e5c9fc4ce Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Mon, 14 Nov 2005 17:14:51 +1100 Subject: powerpc: iSeries build fixes log_plpar_hcall_return is only used on PPC_PSERIES, so move it closer to its users and inside ifdef CONFIG_PPC_PSERIES. remove the last vestiges of systemcfg in iSeries. Signed-off-by: Stephen Rothwell --- arch/powerpc/kernel/lparcfg.c | 51 +++++++++++++++++----------------- arch/powerpc/platforms/iseries/setup.c | 6 ---- 2 files changed, 25 insertions(+), 32 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c index 1b3ba8a440a..9dda16ccde7 100644 --- a/arch/powerpc/kernel/lparcfg.c +++ b/arch/powerpc/kernel/lparcfg.c @@ -42,32 +42,6 @@ /* #define LPARCFG_DEBUG */ -/* find a better place for this function... */ -static void log_plpar_hcall_return(unsigned long rc, char *tag) -{ - if (rc == 0) /* success, return */ - return; -/* check for null tag ? */ - if (rc == H_Hardware) - printk(KERN_INFO - "plpar-hcall (%s) failed with hardware fault\n", tag); - else if (rc == H_Function) - printk(KERN_INFO - "plpar-hcall (%s) failed; function not allowed\n", tag); - else if (rc == H_Authority) - printk(KERN_INFO - "plpar-hcall (%s) failed; not authorized to this function\n", - tag); - else if (rc == H_Parameter) - printk(KERN_INFO "plpar-hcall (%s) failed; Bad parameter(s)\n", - tag); - else - printk(KERN_INFO - "plpar-hcall (%s) failed with unexpected rc(0x%lx)\n", - tag, rc); - -} - static struct proc_dir_entry *proc_ppc64_lparcfg; #define LPARCFG_BUFF_SIZE 4096 @@ -172,6 +146,31 @@ static int lparcfg_data(struct seq_file *m, void *v) /* * Methods used to fetch LPAR data when running on a pSeries platform. */ +/* find a better place for this function... */ +static void log_plpar_hcall_return(unsigned long rc, char *tag) +{ + if (rc == 0) /* success, return */ + return; +/* check for null tag ? */ + if (rc == H_Hardware) + printk(KERN_INFO + "plpar-hcall (%s) failed with hardware fault\n", tag); + else if (rc == H_Function) + printk(KERN_INFO + "plpar-hcall (%s) failed; function not allowed\n", tag); + else if (rc == H_Authority) + printk(KERN_INFO + "plpar-hcall (%s) failed; not authorized to this function\n", + tag); + else if (rc == H_Parameter) + printk(KERN_INFO "plpar-hcall (%s) failed; Bad parameter(s)\n", + tag); + else + printk(KERN_INFO + "plpar-hcall (%s) failed with unexpected rc(0x%lx)\n", + tag, rc); + +} /* * H_GET_PPP hcall returns info in 4 parms. diff --git a/arch/powerpc/platforms/iseries/setup.c b/arch/powerpc/platforms/iseries/setup.c index 6a29f301436..da26639190d 100644 --- a/arch/powerpc/platforms/iseries/setup.c +++ b/arch/powerpc/platforms/iseries/setup.c @@ -39,7 +39,6 @@ #include #include #include -#include #include #include #include @@ -548,8 +547,6 @@ static unsigned long __init build_iSeries_Memory_Map(void) */ static void __init iSeries_setup_arch(void) { - unsigned procIx = get_paca()->lppaca.dyn_hv_phys_proc_index; - if (get_paca()->lppaca.shared_proc) { ppc_md.idle_loop = iseries_shared_idle; printk(KERN_INFO "Using shared processor idle loop\n"); @@ -565,9 +562,6 @@ static void __init iSeries_setup_arch(void) itVpdAreas.xSlicMaxLogicalProcs); printk("Max physical processors = %d\n", itVpdAreas.xSlicMaxPhysicalProcs); - - _systemcfg->processor = xIoHriProcessorVpd[procIx].xPVR; - printk("Processor version = %x\n", _systemcfg->processor); } static void iSeries_show_cpuinfo(struct seq_file *m) -- cgit v1.2.3 From 7568cb4ef6c507164b65b01f972a3bd026898ae1 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Mon, 14 Nov 2005 17:30:17 +1100 Subject: powerpc: Move most remaining ppc64 files over to arch/powerpc Also deletes files in arch/ppc64 that are no longer used now that we don't compile with ARCH=ppc64 any more. Signed-off-by: Paul Mackerras --- arch/powerpc/Kconfig | 1 + arch/powerpc/kernel/Makefile | 18 +- arch/powerpc/kernel/dma_64.c | 151 ++++ arch/powerpc/kernel/iomap.c | 146 +++ arch/powerpc/kernel/iommu.c | 572 ++++++++++++ arch/powerpc/kernel/kprobes.c | 459 ++++++++++ arch/powerpc/kernel/machine_kexec_64.c | 358 ++++++++ arch/powerpc/kernel/module_64.c | 455 ++++++++++ arch/powerpc/kernel/pci_64.c | 1319 ++++++++++++++++++++++++++++ arch/powerpc/kernel/pci_direct_iommu.c | 94 ++ arch/powerpc/kernel/pci_dn.c | 230 +++++ arch/powerpc/kernel/pci_iommu.c | 128 +++ arch/powerpc/platforms/pseries/Makefile | 5 +- arch/powerpc/platforms/pseries/hvconsole.c | 74 ++ arch/powerpc/platforms/pseries/hvcserver.c | 251 ++++++ 15 files changed, 4255 insertions(+), 6 deletions(-) create mode 100644 arch/powerpc/kernel/dma_64.c create mode 100644 arch/powerpc/kernel/iomap.c create mode 100644 arch/powerpc/kernel/iommu.c create mode 100644 arch/powerpc/kernel/kprobes.c create mode 100644 arch/powerpc/kernel/machine_kexec_64.c create mode 100644 arch/powerpc/kernel/module_64.c create mode 100644 arch/powerpc/kernel/pci_64.c create mode 100644 arch/powerpc/kernel/pci_direct_iommu.c create mode 100644 arch/powerpc/kernel/pci_dn.c create mode 100644 arch/powerpc/kernel/pci_iommu.c create mode 100644 arch/powerpc/platforms/pseries/hvconsole.c create mode 100644 arch/powerpc/platforms/pseries/hvcserver.c (limited to 'arch/powerpc') diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index c523029674e..c5c3f4213cd 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -932,6 +932,7 @@ source "arch/powerpc/oprofile/Kconfig" config KPROBES bool "Kprobes (EXPERIMENTAL)" + depends on PPC64 help Kprobes allows you to trap at almost any kernel address and execute a callback function. register_kprobe() establishes diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index 046b4bf1f21..4970e3721a8 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -49,12 +49,23 @@ extra-y += vmlinux.lds obj-y += process.o init_task.o time.o \ prom.o traps.o setup-common.o obj-$(CONFIG_PPC32) += entry_32.o setup_32.o misc_32.o systbl.o -obj-$(CONFIG_PPC64) += misc_64.o +obj-$(CONFIG_PPC64) += misc_64.o dma_64.o iommu.o obj-$(CONFIG_PPC_OF) += prom_init.o obj-$(CONFIG_MODULES) += ppc_ksyms.o obj-$(CONFIG_BOOTX_TEXT) += btext.o obj-$(CONFIG_6xx) += idle_6xx.o obj-$(CONFIG_SMP) += smp.o +obj-$(CONFIG_KPROBES) += kprobes.o + +module-$(CONFIG_PPC64) += module_64.o +obj-$(CONFIG_MODULES) += $(module-y) + +pci64-$(CONFIG_PPC64) += pci_64.o pci_dn.o pci_iommu.o \ + pci_direct_iommu.o iomap.o +obj-$(CONFIG_PCI) += $(pci64-y) + +kexec64-$(CONFIG_PPC64) += machine_kexec_64.o +obj-$(CONFIG_KEXEC) += $(kexec64-y) ifeq ($(CONFIG_PPC_ISERIES),y) $(obj)/head_64.o: $(obj)/lparmap.s @@ -62,11 +73,8 @@ AFLAGS_head_64.o += -I$(obj) endif else -# stuff used from here for ARCH=ppc or ARCH=ppc64 +# stuff used from here for ARCH=ppc smpobj-$(CONFIG_SMP) += smp.o -obj-$(CONFIG_PPC64) += traps.o process.o init_task.o time.o \ - setup-common.o $(smpobj-y) - endif diff --git a/arch/powerpc/kernel/dma_64.c b/arch/powerpc/kernel/dma_64.c new file mode 100644 index 00000000000..7c3419656cc --- /dev/null +++ b/arch/powerpc/kernel/dma_64.c @@ -0,0 +1,151 @@ +/* + * Copyright (C) 2004 IBM Corporation + * + * Implements the generic device dma API for ppc64. Handles + * the pci and vio busses + */ + +#include +#include +/* Include the busses we support */ +#include +#include +#include +#include + +static struct dma_mapping_ops *get_dma_ops(struct device *dev) +{ +#ifdef CONFIG_PCI + if (dev->bus == &pci_bus_type) + return &pci_dma_ops; +#endif +#ifdef CONFIG_IBMVIO + if (dev->bus == &vio_bus_type) + return &vio_dma_ops; +#endif + return NULL; +} + +int dma_supported(struct device *dev, u64 mask) +{ + struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + + if (dma_ops) + return dma_ops->dma_supported(dev, mask); + BUG(); + return 0; +} +EXPORT_SYMBOL(dma_supported); + +int dma_set_mask(struct device *dev, u64 dma_mask) +{ +#ifdef CONFIG_PCI + if (dev->bus == &pci_bus_type) + return pci_set_dma_mask(to_pci_dev(dev), dma_mask); +#endif +#ifdef CONFIG_IBMVIO + if (dev->bus == &vio_bus_type) + return -EIO; +#endif /* CONFIG_IBMVIO */ + BUG(); + return 0; +} +EXPORT_SYMBOL(dma_set_mask); + +void *dma_alloc_coherent(struct device *dev, size_t size, + dma_addr_t *dma_handle, gfp_t flag) +{ + struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + + if (dma_ops) + return dma_ops->alloc_coherent(dev, size, dma_handle, flag); + BUG(); + return NULL; +} +EXPORT_SYMBOL(dma_alloc_coherent); + +void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, + dma_addr_t dma_handle) +{ + struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + + if (dma_ops) + dma_ops->free_coherent(dev, size, cpu_addr, dma_handle); + else + BUG(); +} +EXPORT_SYMBOL(dma_free_coherent); + +dma_addr_t dma_map_single(struct device *dev, void *cpu_addr, size_t size, + enum dma_data_direction direction) +{ + struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + + if (dma_ops) + return dma_ops->map_single(dev, cpu_addr, size, direction); + BUG(); + return (dma_addr_t)0; +} +EXPORT_SYMBOL(dma_map_single); + +void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size, + enum dma_data_direction direction) +{ + struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + + if (dma_ops) + dma_ops->unmap_single(dev, dma_addr, size, direction); + else + BUG(); +} +EXPORT_SYMBOL(dma_unmap_single); + +dma_addr_t dma_map_page(struct device *dev, struct page *page, + unsigned long offset, size_t size, + enum dma_data_direction direction) +{ + struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + + if (dma_ops) + return dma_ops->map_single(dev, + (page_address(page) + offset), size, direction); + BUG(); + return (dma_addr_t)0; +} +EXPORT_SYMBOL(dma_map_page); + +void dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size, + enum dma_data_direction direction) +{ + struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + + if (dma_ops) + dma_ops->unmap_single(dev, dma_address, size, direction); + else + BUG(); +} +EXPORT_SYMBOL(dma_unmap_page); + +int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, + enum dma_data_direction direction) +{ + struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + + if (dma_ops) + return dma_ops->map_sg(dev, sg, nents, direction); + BUG(); + return 0; +} +EXPORT_SYMBOL(dma_map_sg); + +void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries, + enum dma_data_direction direction) +{ + struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + + if (dma_ops) + dma_ops->unmap_sg(dev, sg, nhwentries, direction); + else + BUG(); +} +EXPORT_SYMBOL(dma_unmap_sg); diff --git a/arch/powerpc/kernel/iomap.c b/arch/powerpc/kernel/iomap.c new file mode 100644 index 00000000000..6160c8dbb7c --- /dev/null +++ b/arch/powerpc/kernel/iomap.c @@ -0,0 +1,146 @@ +/* + * arch/ppc64/kernel/iomap.c + * + * ppc64 "iomap" interface implementation. + * + * (C) Copyright 2004 Linus Torvalds + */ +#include +#include +#include +#include + +/* + * Here comes the ppc64 implementation of the IOMAP + * interfaces. + */ +unsigned int fastcall ioread8(void __iomem *addr) +{ + return readb(addr); +} +unsigned int fastcall ioread16(void __iomem *addr) +{ + return readw(addr); +} +unsigned int fastcall ioread16be(void __iomem *addr) +{ + return in_be16(addr); +} +unsigned int fastcall ioread32(void __iomem *addr) +{ + return readl(addr); +} +unsigned int fastcall ioread32be(void __iomem *addr) +{ + return in_be32(addr); +} +EXPORT_SYMBOL(ioread8); +EXPORT_SYMBOL(ioread16); +EXPORT_SYMBOL(ioread16be); +EXPORT_SYMBOL(ioread32); +EXPORT_SYMBOL(ioread32be); + +void fastcall iowrite8(u8 val, void __iomem *addr) +{ + writeb(val, addr); +} +void fastcall iowrite16(u16 val, void __iomem *addr) +{ + writew(val, addr); +} +void fastcall iowrite16be(u16 val, void __iomem *addr) +{ + out_be16(addr, val); +} +void fastcall iowrite32(u32 val, void __iomem *addr) +{ + writel(val, addr); +} +void fastcall iowrite32be(u32 val, void __iomem *addr) +{ + out_be32(addr, val); +} +EXPORT_SYMBOL(iowrite8); +EXPORT_SYMBOL(iowrite16); +EXPORT_SYMBOL(iowrite16be); +EXPORT_SYMBOL(iowrite32); +EXPORT_SYMBOL(iowrite32be); + +/* + * These are the "repeat read/write" functions. Note the + * non-CPU byte order. We do things in "IO byteorder" + * here. + * + * FIXME! We could make these do EEH handling if we really + * wanted. Not clear if we do. + */ +void ioread8_rep(void __iomem *addr, void *dst, unsigned long count) +{ + _insb((u8 __iomem *) addr, dst, count); +} +void ioread16_rep(void __iomem *addr, void *dst, unsigned long count) +{ + _insw_ns((u16 __iomem *) addr, dst, count); +} +void ioread32_rep(void __iomem *addr, void *dst, unsigned long count) +{ + _insl_ns((u32 __iomem *) addr, dst, count); +} +EXPORT_SYMBOL(ioread8_rep); +EXPORT_SYMBOL(ioread16_rep); +EXPORT_SYMBOL(ioread32_rep); + +void iowrite8_rep(void __iomem *addr, const void *src, unsigned long count) +{ + _outsb((u8 __iomem *) addr, src, count); +} +void iowrite16_rep(void __iomem *addr, const void *src, unsigned long count) +{ + _outsw_ns((u16 __iomem *) addr, src, count); +} +void iowrite32_rep(void __iomem *addr, const void *src, unsigned long count) +{ + _outsl_ns((u32 __iomem *) addr, src, count); +} +EXPORT_SYMBOL(iowrite8_rep); +EXPORT_SYMBOL(iowrite16_rep); +EXPORT_SYMBOL(iowrite32_rep); + +void __iomem *ioport_map(unsigned long port, unsigned int len) +{ + if (!_IO_IS_VALID(port)) + return NULL; + return (void __iomem *) (port+pci_io_base); +} + +void ioport_unmap(void __iomem *addr) +{ + /* Nothing to do */ +} +EXPORT_SYMBOL(ioport_map); +EXPORT_SYMBOL(ioport_unmap); + +void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max) +{ + unsigned long start = pci_resource_start(dev, bar); + unsigned long len = pci_resource_len(dev, bar); + unsigned long flags = pci_resource_flags(dev, bar); + + if (!len) + return NULL; + if (max && len > max) + len = max; + if (flags & IORESOURCE_IO) + return ioport_map(start, len); + if (flags & IORESOURCE_MEM) + return ioremap(start, len); + /* What? */ + return NULL; +} + +void pci_iounmap(struct pci_dev *dev, void __iomem *addr) +{ + /* Nothing to do */ +} +EXPORT_SYMBOL(pci_iomap); +EXPORT_SYMBOL(pci_iounmap); diff --git a/arch/powerpc/kernel/iommu.c b/arch/powerpc/kernel/iommu.c new file mode 100644 index 00000000000..4d9b4388918 --- /dev/null +++ b/arch/powerpc/kernel/iommu.c @@ -0,0 +1,572 @@ +/* + * arch/ppc64/kernel/iommu.c + * Copyright (C) 2001 Mike Corrigan & Dave Engebretsen, IBM Corporation + * + * Rewrite, cleanup, new allocation schemes, virtual merging: + * Copyright (C) 2004 Olof Johansson, IBM Corporation + * and Ben. Herrenschmidt, IBM Corporation + * + * Dynamic DMA mapping support, bus-independent parts. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DBG(...) + +#ifdef CONFIG_IOMMU_VMERGE +static int novmerge = 0; +#else +static int novmerge = 1; +#endif + +static int __init setup_iommu(char *str) +{ + if (!strcmp(str, "novmerge")) + novmerge = 1; + else if (!strcmp(str, "vmerge")) + novmerge = 0; + return 1; +} + +__setup("iommu=", setup_iommu); + +static unsigned long iommu_range_alloc(struct iommu_table *tbl, + unsigned long npages, + unsigned long *handle, + unsigned int align_order) +{ + unsigned long n, end, i, start; + unsigned long limit; + int largealloc = npages > 15; + int pass = 0; + unsigned long align_mask; + + align_mask = 0xffffffffffffffffl >> (64 - align_order); + + /* This allocator was derived from x86_64's bit string search */ + + /* Sanity check */ + if (unlikely(npages) == 0) { + if (printk_ratelimit()) + WARN_ON(1); + return DMA_ERROR_CODE; + } + + if (handle && *handle) + start = *handle; + else + start = largealloc ? tbl->it_largehint : tbl->it_hint; + + /* Use only half of the table for small allocs (15 pages or less) */ + limit = largealloc ? tbl->it_size : tbl->it_halfpoint; + + if (largealloc && start < tbl->it_halfpoint) + start = tbl->it_halfpoint; + + /* The case below can happen if we have a small segment appended + * to a large, or when the previous alloc was at the very end of + * the available space. If so, go back to the initial start. + */ + if (start >= limit) + start = largealloc ? tbl->it_largehint : tbl->it_hint; + + again: + + n = find_next_zero_bit(tbl->it_map, limit, start); + + /* Align allocation */ + n = (n + align_mask) & ~align_mask; + + end = n + npages; + + if (unlikely(end >= limit)) { + if (likely(pass < 2)) { + /* First failure, just rescan the half of the table. + * Second failure, rescan the other half of the table. + */ + start = (largealloc ^ pass) ? tbl->it_halfpoint : 0; + limit = pass ? tbl->it_size : limit; + pass++; + goto again; + } else { + /* Third failure, give up */ + return DMA_ERROR_CODE; + } + } + + for (i = n; i < end; i++) + if (test_bit(i, tbl->it_map)) { + start = i+1; + goto again; + } + + for (i = n; i < end; i++) + __set_bit(i, tbl->it_map); + + /* Bump the hint to a new block for small allocs. */ + if (largealloc) { + /* Don't bump to new block to avoid fragmentation */ + tbl->it_largehint = end; + } else { + /* Overflow will be taken care of at the next allocation */ + tbl->it_hint = (end + tbl->it_blocksize - 1) & + ~(tbl->it_blocksize - 1); + } + + /* Update handle for SG allocations */ + if (handle) + *handle = end; + + return n; +} + +static dma_addr_t iommu_alloc(struct iommu_table *tbl, void *page, + unsigned int npages, enum dma_data_direction direction, + unsigned int align_order) +{ + unsigned long entry, flags; + dma_addr_t ret = DMA_ERROR_CODE; + + spin_lock_irqsave(&(tbl->it_lock), flags); + + entry = iommu_range_alloc(tbl, npages, NULL, align_order); + + if (unlikely(entry == DMA_ERROR_CODE)) { + spin_unlock_irqrestore(&(tbl->it_lock), flags); + return DMA_ERROR_CODE; + } + + entry += tbl->it_offset; /* Offset into real TCE table */ + ret = entry << PAGE_SHIFT; /* Set the return dma address */ + + /* Put the TCEs in the HW table */ + ppc_md.tce_build(tbl, entry, npages, (unsigned long)page & PAGE_MASK, + direction); + + + /* Flush/invalidate TLB caches if necessary */ + if (ppc_md.tce_flush) + ppc_md.tce_flush(tbl); + + spin_unlock_irqrestore(&(tbl->it_lock), flags); + + /* Make sure updates are seen by hardware */ + mb(); + + return ret; +} + +static void __iommu_free(struct iommu_table *tbl, dma_addr_t dma_addr, + unsigned int npages) +{ + unsigned long entry, free_entry; + unsigned long i; + + entry = dma_addr >> PAGE_SHIFT; + free_entry = entry - tbl->it_offset; + + if (((free_entry + npages) > tbl->it_size) || + (entry < tbl->it_offset)) { + if (printk_ratelimit()) { + printk(KERN_INFO "iommu_free: invalid entry\n"); + printk(KERN_INFO "\tentry = 0x%lx\n", entry); + printk(KERN_INFO "\tdma_addr = 0x%lx\n", (u64)dma_addr); + printk(KERN_INFO "\tTable = 0x%lx\n", (u64)tbl); + printk(KERN_INFO "\tbus# = 0x%lx\n", (u64)tbl->it_busno); + printk(KERN_INFO "\tsize = 0x%lx\n", (u64)tbl->it_size); + printk(KERN_INFO "\tstartOff = 0x%lx\n", (u64)tbl->it_offset); + printk(KERN_INFO "\tindex = 0x%lx\n", (u64)tbl->it_index); + WARN_ON(1); + } + return; + } + + ppc_md.tce_free(tbl, entry, npages); + + for (i = 0; i < npages; i++) + __clear_bit(free_entry+i, tbl->it_map); +} + +static void iommu_free(struct iommu_table *tbl, dma_addr_t dma_addr, + unsigned int npages) +{ + unsigned long flags; + + spin_lock_irqsave(&(tbl->it_lock), flags); + + __iommu_free(tbl, dma_addr, npages); + + /* Make sure TLB cache is flushed if the HW needs it. We do + * not do an mb() here on purpose, it is not needed on any of + * the current platforms. + */ + if (ppc_md.tce_flush) + ppc_md.tce_flush(tbl); + + spin_unlock_irqrestore(&(tbl->it_lock), flags); +} + +int iommu_map_sg(struct device *dev, struct iommu_table *tbl, + struct scatterlist *sglist, int nelems, + enum dma_data_direction direction) +{ + dma_addr_t dma_next = 0, dma_addr; + unsigned long flags; + struct scatterlist *s, *outs, *segstart; + int outcount, incount; + unsigned long handle; + + BUG_ON(direction == DMA_NONE); + + if ((nelems == 0) || !tbl) + return 0; + + outs = s = segstart = &sglist[0]; + outcount = 1; + incount = nelems; + handle = 0; + + /* Init first segment length for backout at failure */ + outs->dma_length = 0; + + DBG("mapping %d elements:\n", nelems); + + spin_lock_irqsave(&(tbl->it_lock), flags); + + for (s = outs; nelems; nelems--, s++) { + unsigned long vaddr, npages, entry, slen; + + slen = s->length; + /* Sanity check */ + if (slen == 0) { + dma_next = 0; + continue; + } + /* Allocate iommu entries for that segment */ + vaddr = (unsigned long)page_address(s->page) + s->offset; + npages = PAGE_ALIGN(vaddr + slen) - (vaddr & PAGE_MASK); + npages >>= PAGE_SHIFT; + entry = iommu_range_alloc(tbl, npages, &handle, 0); + + DBG(" - vaddr: %lx, size: %lx\n", vaddr, slen); + + /* Handle failure */ + if (unlikely(entry == DMA_ERROR_CODE)) { + if (printk_ratelimit()) + printk(KERN_INFO "iommu_alloc failed, tbl %p vaddr %lx" + " npages %lx\n", tbl, vaddr, npages); + goto failure; + } + + /* Convert entry to a dma_addr_t */ + entry += tbl->it_offset; + dma_addr = entry << PAGE_SHIFT; + dma_addr |= s->offset; + + DBG(" - %lx pages, entry: %lx, dma_addr: %lx\n", + npages, entry, dma_addr); + + /* Insert into HW table */ + ppc_md.tce_build(tbl, entry, npages, vaddr & PAGE_MASK, direction); + + /* If we are in an open segment, try merging */ + if (segstart != s) { + DBG(" - trying merge...\n"); + /* We cannot merge if: + * - allocated dma_addr isn't contiguous to previous allocation + */ + if (novmerge || (dma_addr != dma_next)) { + /* Can't merge: create a new segment */ + segstart = s; + outcount++; outs++; + DBG(" can't merge, new segment.\n"); + } else { + outs->dma_length += s->length; + DBG(" merged, new len: %lx\n", outs->dma_length); + } + } + + if (segstart == s) { + /* This is a new segment, fill entries */ + DBG(" - filling new segment.\n"); + outs->dma_address = dma_addr; + outs->dma_length = slen; + } + + /* Calculate next page pointer for contiguous check */ + dma_next = dma_addr + slen; + + DBG(" - dma next is: %lx\n", dma_next); + } + + /* Flush/invalidate TLB caches if necessary */ + if (ppc_md.tce_flush) + ppc_md.tce_flush(tbl); + + spin_unlock_irqrestore(&(tbl->it_lock), flags); + + /* Make sure updates are seen by hardware */ + mb(); + + DBG("mapped %d elements:\n", outcount); + + /* For the sake of iommu_unmap_sg, we clear out the length in the + * next entry of the sglist if we didn't fill the list completely + */ + if (outcount < incount) { + outs++; + outs->dma_address = DMA_ERROR_CODE; + outs->dma_length = 0; + } + return outcount; + + failure: + for (s = &sglist[0]; s <= outs; s++) { + if (s->dma_length != 0) { + unsigned long vaddr, npages; + + vaddr = s->dma_address & PAGE_MASK; + npages = (PAGE_ALIGN(s->dma_address + s->dma_length) - vaddr) + >> PAGE_SHIFT; + __iommu_free(tbl, vaddr, npages); + } + } + spin_unlock_irqrestore(&(tbl->it_lock), flags); + return 0; +} + + +void iommu_unmap_sg(struct iommu_table *tbl, struct scatterlist *sglist, + int nelems, enum dma_data_direction direction) +{ + unsigned long flags; + + BUG_ON(direction == DMA_NONE); + + if (!tbl) + return; + + spin_lock_irqsave(&(tbl->it_lock), flags); + + while (nelems--) { + unsigned int npages; + dma_addr_t dma_handle = sglist->dma_address; + + if (sglist->dma_length == 0) + break; + npages = (PAGE_ALIGN(dma_handle + sglist->dma_length) + - (dma_handle & PAGE_MASK)) >> PAGE_SHIFT; + __iommu_free(tbl, dma_handle, npages); + sglist++; + } + + /* Flush/invalidate TLBs if necessary. As for iommu_free(), we + * do not do an mb() here, the affected platforms do not need it + * when freeing. + */ + if (ppc_md.tce_flush) + ppc_md.tce_flush(tbl); + + spin_unlock_irqrestore(&(tbl->it_lock), flags); +} + +/* + * Build a iommu_table structure. This contains a bit map which + * is used to manage allocation of the tce space. + */ +struct iommu_table *iommu_init_table(struct iommu_table *tbl) +{ + unsigned long sz; + static int welcomed = 0; + + /* Set aside 1/4 of the table for large allocations. */ + tbl->it_halfpoint = tbl->it_size * 3 / 4; + + /* number of bytes needed for the bitmap */ + sz = (tbl->it_size + 7) >> 3; + + tbl->it_map = (unsigned long *)__get_free_pages(GFP_ATOMIC, get_order(sz)); + if (!tbl->it_map) + panic("iommu_init_table: Can't allocate %ld bytes\n", sz); + + memset(tbl->it_map, 0, sz); + + tbl->it_hint = 0; + tbl->it_largehint = tbl->it_halfpoint; + spin_lock_init(&tbl->it_lock); + + /* Clear the hardware table in case firmware left allocations in it */ + ppc_md.tce_free(tbl, tbl->it_offset, tbl->it_size); + + if (!welcomed) { + printk(KERN_INFO "IOMMU table initialized, virtual merging %s\n", + novmerge ? "disabled" : "enabled"); + welcomed = 1; + } + + return tbl; +} + +void iommu_free_table(struct device_node *dn) +{ + struct pci_dn *pdn = dn->data; + struct iommu_table *tbl = pdn->iommu_table; + unsigned long bitmap_sz, i; + unsigned int order; + + if (!tbl || !tbl->it_map) { + printk(KERN_ERR "%s: expected TCE map for %s\n", __FUNCTION__, + dn->full_name); + return; + } + + /* verify that table contains no entries */ + /* it_size is in entries, and we're examining 64 at a time */ + for (i = 0; i < (tbl->it_size/64); i++) { + if (tbl->it_map[i] != 0) { + printk(KERN_WARNING "%s: Unexpected TCEs for %s\n", + __FUNCTION__, dn->full_name); + break; + } + } + + /* calculate bitmap size in bytes */ + bitmap_sz = (tbl->it_size + 7) / 8; + + /* free bitmap */ + order = get_order(bitmap_sz); + free_pages((unsigned long) tbl->it_map, order); + + /* free table */ + kfree(tbl); +} + +/* Creates TCEs for a user provided buffer. The user buffer must be + * contiguous real kernel storage (not vmalloc). The address of the buffer + * passed here is the kernel (virtual) address of the buffer. The buffer + * need not be page aligned, the dma_addr_t returned will point to the same + * byte within the page as vaddr. + */ +dma_addr_t iommu_map_single(struct iommu_table *tbl, void *vaddr, + size_t size, enum dma_data_direction direction) +{ + dma_addr_t dma_handle = DMA_ERROR_CODE; + unsigned long uaddr; + unsigned int npages; + + BUG_ON(direction == DMA_NONE); + + uaddr = (unsigned long)vaddr; + npages = PAGE_ALIGN(uaddr + size) - (uaddr & PAGE_MASK); + npages >>= PAGE_SHIFT; + + if (tbl) { + dma_handle = iommu_alloc(tbl, vaddr, npages, direction, 0); + if (dma_handle == DMA_ERROR_CODE) { + if (printk_ratelimit()) { + printk(KERN_INFO "iommu_alloc failed, " + "tbl %p vaddr %p npages %d\n", + tbl, vaddr, npages); + } + } else + dma_handle |= (uaddr & ~PAGE_MASK); + } + + return dma_handle; +} + +void iommu_unmap_single(struct iommu_table *tbl, dma_addr_t dma_handle, + size_t size, enum dma_data_direction direction) +{ + BUG_ON(direction == DMA_NONE); + + if (tbl) + iommu_free(tbl, dma_handle, (PAGE_ALIGN(dma_handle + size) - + (dma_handle & PAGE_MASK)) >> PAGE_SHIFT); +} + +/* Allocates a contiguous real buffer and creates mappings over it. + * Returns the virtual address of the buffer and sets dma_handle + * to the dma address (mapping) of the first page. + */ +void *iommu_alloc_coherent(struct iommu_table *tbl, size_t size, + dma_addr_t *dma_handle, gfp_t flag) +{ + void *ret = NULL; + dma_addr_t mapping; + unsigned int npages, order; + + size = PAGE_ALIGN(size); + npages = size >> PAGE_SHIFT; + order = get_order(size); + + /* + * Client asked for way too much space. This is checked later + * anyway. It is easier to debug here for the drivers than in + * the tce tables. + */ + if (order >= IOMAP_MAX_ORDER) { + printk("iommu_alloc_consistent size too large: 0x%lx\n", size); + return NULL; + } + + if (!tbl) + return NULL; + + /* Alloc enough pages (and possibly more) */ + ret = (void *)__get_free_pages(flag, order); + if (!ret) + return NULL; + memset(ret, 0, size); + + /* Set up tces to cover the allocated range */ + mapping = iommu_alloc(tbl, ret, npages, DMA_BIDIRECTIONAL, order); + if (mapping == DMA_ERROR_CODE) { + free_pages((unsigned long)ret, order); + ret = NULL; + } else + *dma_handle = mapping; + return ret; +} + +void iommu_free_coherent(struct iommu_table *tbl, size_t size, + void *vaddr, dma_addr_t dma_handle) +{ + unsigned int npages; + + if (tbl) { + size = PAGE_ALIGN(size); + npages = size >> PAGE_SHIFT; + iommu_free(tbl, dma_handle, npages); + free_pages((unsigned long)vaddr, get_order(size)); + } +} diff --git a/arch/powerpc/kernel/kprobes.c b/arch/powerpc/kernel/kprobes.c new file mode 100644 index 00000000000..511af54e623 --- /dev/null +++ b/arch/powerpc/kernel/kprobes.c @@ -0,0 +1,459 @@ +/* + * Kernel Probes (KProbes) + * arch/ppc64/kernel/kprobes.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * Copyright (C) IBM Corporation, 2002, 2004 + * + * 2002-Oct Created by Vamsi Krishna S Kernel + * Probes initial implementation ( includes contributions from + * Rusty Russell). + * 2004-July Suparna Bhattacharya added jumper probes + * interface to access function arguments. + * 2004-Nov Ananth N Mavinakayanahalli kprobes port + * for PPC64 + */ + +#include +#include +#include +#include +#include +#include +#include + +static DECLARE_MUTEX(kprobe_mutex); +DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL; +DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk); + +int __kprobes arch_prepare_kprobe(struct kprobe *p) +{ + int ret = 0; + kprobe_opcode_t insn = *p->addr; + + if ((unsigned long)p->addr & 0x03) { + printk("Attempt to register kprobe at an unaligned address\n"); + ret = -EINVAL; + } else if (IS_MTMSRD(insn) || IS_RFID(insn)) { + printk("Cannot register a kprobe on rfid or mtmsrd\n"); + ret = -EINVAL; + } + + /* insn must be on a special executable page on ppc64 */ + if (!ret) { + down(&kprobe_mutex); + p->ainsn.insn = get_insn_slot(); + up(&kprobe_mutex); + if (!p->ainsn.insn) + ret = -ENOMEM; + } + return ret; +} + +void __kprobes arch_copy_kprobe(struct kprobe *p) +{ + memcpy(p->ainsn.insn, p->addr, MAX_INSN_SIZE * sizeof(kprobe_opcode_t)); + p->opcode = *p->addr; +} + +void __kprobes arch_arm_kprobe(struct kprobe *p) +{ + *p->addr = BREAKPOINT_INSTRUCTION; + flush_icache_range((unsigned long) p->addr, + (unsigned long) p->addr + sizeof(kprobe_opcode_t)); +} + +void __kprobes arch_disarm_kprobe(struct kprobe *p) +{ + *p->addr = p->opcode; + flush_icache_range((unsigned long) p->addr, + (unsigned long) p->addr + sizeof(kprobe_opcode_t)); +} + +void __kprobes arch_remove_kprobe(struct kprobe *p) +{ + down(&kprobe_mutex); + free_insn_slot(p->ainsn.insn); + up(&kprobe_mutex); +} + +static inline void prepare_singlestep(struct kprobe *p, struct pt_regs *regs) +{ + kprobe_opcode_t insn = *p->ainsn.insn; + + regs->msr |= MSR_SE; + + /* single step inline if it is a trap variant */ + if (is_trap(insn)) + regs->nip = (unsigned long)p->addr; + else + regs->nip = (unsigned long)p->ainsn.insn; +} + +static inline void save_previous_kprobe(struct kprobe_ctlblk *kcb) +{ + kcb->prev_kprobe.kp = kprobe_running(); + kcb->prev_kprobe.status = kcb->kprobe_status; + kcb->prev_kprobe.saved_msr = kcb->kprobe_saved_msr; +} + +static inline void restore_previous_kprobe(struct kprobe_ctlblk *kcb) +{ + __get_cpu_var(current_kprobe) = kcb->prev_kprobe.kp; + kcb->kprobe_status = kcb->prev_kprobe.status; + kcb->kprobe_saved_msr = kcb->prev_kprobe.saved_msr; +} + +static inline void set_current_kprobe(struct kprobe *p, struct pt_regs *regs, + struct kprobe_ctlblk *kcb) +{ + __get_cpu_var(current_kprobe) = p; + kcb->kprobe_saved_msr = regs->msr; +} + +/* Called with kretprobe_lock held */ +void __kprobes arch_prepare_kretprobe(struct kretprobe *rp, + struct pt_regs *regs) +{ + struct kretprobe_instance *ri; + + if ((ri = get_free_rp_inst(rp)) != NULL) { + ri->rp = rp; + ri->task = current; + ri->ret_addr = (kprobe_opcode_t *)regs->link; + + /* Replace the return addr with trampoline addr */ + regs->link = (unsigned long)kretprobe_trampoline; + add_rp_inst(ri); + } else { + rp->nmissed++; + } +} + +static inline int kprobe_handler(struct pt_regs *regs) +{ + struct kprobe *p; + int ret = 0; + unsigned int *addr = (unsigned int *)regs->nip; + struct kprobe_ctlblk *kcb; + + /* + * We don't want to be preempted for the entire + * duration of kprobe processing + */ + preempt_disable(); + kcb = get_kprobe_ctlblk(); + + /* Check we're not actually recursing */ + if (kprobe_running()) { + p = get_kprobe(addr); + if (p) { + kprobe_opcode_t insn = *p->ainsn.insn; + if (kcb->kprobe_status == KPROBE_HIT_SS && + is_trap(insn)) { + regs->msr &= ~MSR_SE; + regs->msr |= kcb->kprobe_saved_msr; + goto no_kprobe; + } + /* We have reentered the kprobe_handler(), since + * another probe was hit while within the handler. + * We here save the original kprobes variables and + * just single step on the instruction of the new probe + * without calling any user handlers. + */ + save_previous_kprobe(kcb); + set_current_kprobe(p, regs, kcb); + kcb->kprobe_saved_msr = regs->msr; + p->nmissed++; + prepare_singlestep(p, regs); + kcb->kprobe_status = KPROBE_REENTER; + return 1; + } else { + p = __get_cpu_var(current_kprobe); + if (p->break_handler && p->break_handler(p, regs)) { + goto ss_probe; + } + } + goto no_kprobe; + } + + p = get_kprobe(addr); + if (!p) { + if (*addr != BREAKPOINT_INSTRUCTION) { + /* + * PowerPC has multiple variants of the "trap" + * instruction. If the current instruction is a + * trap variant, it could belong to someone else + */ + kprobe_opcode_t cur_insn = *addr; + if (is_trap(cur_insn)) + goto no_kprobe; + /* + * The breakpoint instruction was removed right + * after we hit it. Another cpu has removed + * either a probepoint or a debugger breakpoint + * at this address. In either case, no further + * handling of this interrupt is appropriate. + */ + ret = 1; + } + /* Not one of ours: let kernel handle it */ + goto no_kprobe; + } + + kcb->kprobe_status = KPROBE_HIT_ACTIVE; + set_current_kprobe(p, regs, kcb); + if (p->pre_handler && p->pre_handler(p, regs)) + /* handler has already set things up, so skip ss setup */ + return 1; + +ss_probe: + prepare_singlestep(p, regs); + kcb->kprobe_status = KPROBE_HIT_SS; + return 1; + +no_kprobe: + preempt_enable_no_resched(); + return ret; +} + +/* + * Function return probe trampoline: + * - init_kprobes() establishes a probepoint here + * - When the probed function returns, this probe + * causes the handlers to fire + */ +void kretprobe_trampoline_holder(void) +{ + asm volatile(".global kretprobe_trampoline\n" + "kretprobe_trampoline:\n" + "nop\n"); +} + +/* + * Called when the probe at kretprobe trampoline is hit + */ +int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) +{ + struct kretprobe_instance *ri = NULL; + struct hlist_head *head; + struct hlist_node *node, *tmp; + unsigned long flags, orig_ret_address = 0; + unsigned long trampoline_address =(unsigned long)&kretprobe_trampoline; + + spin_lock_irqsave(&kretprobe_lock, flags); + head = kretprobe_inst_table_head(current); + + /* + * It is possible to have multiple instances associated with a given + * task either because an multiple functions in the call path + * have a return probe installed on them, and/or more then one return + * return probe was registered for a target function. + * + * We can handle this because: + * - instances are always inserted at the head of the list + * - when multiple return probes are registered for the same + * function, the first instance's ret_addr will point to the + * real return address, and all the rest will point to + * kretprobe_trampoline + */ + hlist_for_each_entry_safe(ri, node, tmp, head, hlist) { + if (ri->task != current) + /* another task is sharing our hash bucket */ + continue; + + if (ri->rp && ri->rp->handler) + ri->rp->handler(ri, regs); + + orig_ret_address = (unsigned long)ri->ret_addr; + recycle_rp_inst(ri); + + if (orig_ret_address != trampoline_address) + /* + * This is the real return address. Any other + * instances associated with this task are for + * other calls deeper on the call stack + */ + break; + } + + BUG_ON(!orig_ret_address || (orig_ret_address == trampoline_address)); + regs->nip = orig_ret_address; + + reset_current_kprobe(); + spin_unlock_irqrestore(&kretprobe_lock, flags); + preempt_enable_no_resched(); + + /* + * By returning a non-zero value, we are telling + * kprobe_handler() that we don't want the post_handler + * to run (and have re-enabled preemption) + */ + return 1; +} + +/* + * Called after single-stepping. p->addr is the address of the + * instruction whose first byte has been replaced by the "breakpoint" + * instruction. To avoid the SMP problems that can occur when we + * temporarily put back the original opcode to single-step, we + * single-stepped a copy of the instruction. The address of this + * copy is p->ainsn.insn. + */ +static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs) +{ + int ret; + unsigned int insn = *p->ainsn.insn; + + regs->nip = (unsigned long)p->addr; + ret = emulate_step(regs, insn); + if (ret == 0) + regs->nip = (unsigned long)p->addr + 4; +} + +static inline int post_kprobe_handler(struct pt_regs *regs) +{ + struct kprobe *cur = kprobe_running(); + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + + if (!cur) + return 0; + + if ((kcb->kprobe_status != KPROBE_REENTER) && cur->post_handler) { + kcb->kprobe_status = KPROBE_HIT_SSDONE; + cur->post_handler(cur, regs, 0); + } + + resume_execution(cur, regs); + regs->msr |= kcb->kprobe_saved_msr; + + /*Restore back the original saved kprobes variables and continue. */ + if (kcb->kprobe_status == KPROBE_REENTER) { + restore_previous_kprobe(kcb); + goto out; + } + reset_current_kprobe(); +out: + preempt_enable_no_resched(); + + /* + * if somebody else is singlestepping across a probe point, msr + * will have SE set, in which case, continue the remaining processing + * of do_debug, as if this is not a probe hit. + */ + if (regs->msr & MSR_SE) + return 0; + + return 1; +} + +static inline int kprobe_fault_handler(struct pt_regs *regs, int trapnr) +{ + struct kprobe *cur = kprobe_running(); + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + + if (cur->fault_handler && cur->fault_handler(cur, regs, trapnr)) + return 1; + + if (kcb->kprobe_status & KPROBE_HIT_SS) { + resume_execution(cur, regs); + regs->msr &= ~MSR_SE; + regs->msr |= kcb->kprobe_saved_msr; + + reset_current_kprobe(); + preempt_enable_no_resched(); + } + return 0; +} + +/* + * Wrapper routine to for handling exceptions. + */ +int __kprobes kprobe_exceptions_notify(struct notifier_block *self, + unsigned long val, void *data) +{ + struct die_args *args = (struct die_args *)data; + int ret = NOTIFY_DONE; + + switch (val) { + case DIE_BPT: + if (kprobe_handler(args->regs)) + ret = NOTIFY_STOP; + break; + case DIE_SSTEP: + if (post_kprobe_handler(args->regs)) + ret = NOTIFY_STOP; + break; + case DIE_PAGE_FAULT: + /* kprobe_running() needs smp_processor_id() */ + preempt_disable(); + if (kprobe_running() && + kprobe_fault_handler(args->regs, args->trapnr)) + ret = NOTIFY_STOP; + preempt_enable(); + break; + default: + break; + } + return ret; +} + +int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) +{ + struct jprobe *jp = container_of(p, struct jprobe, kp); + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + + memcpy(&kcb->jprobe_saved_regs, regs, sizeof(struct pt_regs)); + + /* setup return addr to the jprobe handler routine */ + regs->nip = (unsigned long)(((func_descr_t *)jp->entry)->entry); + regs->gpr[2] = (unsigned long)(((func_descr_t *)jp->entry)->toc); + + return 1; +} + +void __kprobes jprobe_return(void) +{ + asm volatile("trap" ::: "memory"); +} + +void __kprobes jprobe_return_end(void) +{ +}; + +int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs) +{ + struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); + + /* + * FIXME - we should ideally be validating that we got here 'cos + * of the "trap" in jprobe_return() above, before restoring the + * saved regs... + */ + memcpy(regs, &kcb->jprobe_saved_regs, sizeof(struct pt_regs)); + preempt_enable_no_resched(); + return 1; +} + +static struct kprobe trampoline_p = { + .addr = (kprobe_opcode_t *) &kretprobe_trampoline, + .pre_handler = trampoline_probe_handler +}; + +int __init arch_init_kprobes(void) +{ + return register_kprobe(&trampoline_p); +} diff --git a/arch/powerpc/kernel/machine_kexec_64.c b/arch/powerpc/kernel/machine_kexec_64.c new file mode 100644 index 00000000000..97c51e452be --- /dev/null +++ b/arch/powerpc/kernel/machine_kexec_64.c @@ -0,0 +1,358 @@ +/* + * machine_kexec.c - handle transition of Linux booting another kernel + * + * Copyright (C) 2004-2005, IBM Corp. + * + * Created by: Milton D Miller II + * + * This source code is licensed under the GNU General Public License, + * Version 2. See the file COPYING for more details. + */ + + +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include /* _end */ +#include +#include + +#define HASH_GROUP_SIZE 0x80 /* size of each hash group, asm/mmu.h */ + +/* Have this around till we move it into crash specific file */ +note_buf_t crash_notes[NR_CPUS]; + +/* Dummy for now. Not sure if we need to have a crash shutdown in here + * and if what it will achieve. Letting it be now to compile the code + * in generic kexec environment + */ +void machine_crash_shutdown(struct pt_regs *regs) +{ + /* do nothing right now */ + /* smp_relase_cpus() if we want smp on panic kernel */ + /* cpu_irq_down to isolate us until we are ready */ +} + +int machine_kexec_prepare(struct kimage *image) +{ + int i; + unsigned long begin, end; /* limits of segment */ + unsigned long low, high; /* limits of blocked memory range */ + struct device_node *node; + unsigned long *basep; + unsigned int *sizep; + + if (!ppc_md.hpte_clear_all) + return -ENOENT; + + /* + * Since we use the kernel fault handlers and paging code to + * handle the virtual mode, we must make sure no destination + * overlaps kernel static data or bss. + */ + for (i = 0; i < image->nr_segments; i++) + if (image->segment[i].mem < __pa(_end)) + return -ETXTBSY; + + /* + * For non-LPAR, we absolutely can not overwrite the mmu hash + * table, since we are still using the bolted entries in it to + * do the copy. Check that here. + * + * It is safe if the end is below the start of the blocked + * region (end <= low), or if the beginning is after the + * end of the blocked region (begin >= high). Use the + * boolean identity !(a || b) === (!a && !b). + */ + if (htab_address) { + low = __pa(htab_address); + high = low + (htab_hash_mask + 1) * HASH_GROUP_SIZE; + + for (i = 0; i < image->nr_segments; i++) { + begin = image->segment[i].mem; + end = begin + image->segment[i].memsz; + + if ((begin < high) && (end > low)) + return -ETXTBSY; + } + } + + /* We also should not overwrite the tce tables */ + for (node = of_find_node_by_type(NULL, "pci"); node != NULL; + node = of_find_node_by_type(node, "pci")) { + basep = (unsigned long *)get_property(node, "linux,tce-base", + NULL); + sizep = (unsigned int *)get_property(node, "linux,tce-size", + NULL); + if (basep == NULL || sizep == NULL) + continue; + + low = *basep; + high = low + (*sizep); + + for (i = 0; i < image->nr_segments; i++) { + begin = image->segment[i].mem; + end = begin + image->segment[i].memsz; + + if ((begin < high) && (end > low)) + return -ETXTBSY; + } + } + + return 0; +} + +void machine_kexec_cleanup(struct kimage *image) +{ + /* we do nothing in prepare that needs to be undone */ +} + +#define IND_FLAGS (IND_DESTINATION | IND_INDIRECTION | IND_DONE | IND_SOURCE) + +static void copy_segments(unsigned long ind) +{ + unsigned long entry; + unsigned long *ptr; + void *dest; + void *addr; + + /* + * We rely on kexec_load to create a lists that properly + * initializes these pointers before they are used. + * We will still crash if the list is wrong, but at least + * the compiler will be quiet. + */ + ptr = NULL; + dest = NULL; + + for (entry = ind; !(entry & IND_DONE); entry = *ptr++) { + addr = __va(entry & PAGE_MASK); + + switch (entry & IND_FLAGS) { + case IND_DESTINATION: + dest = addr; + break; + case IND_INDIRECTION: + ptr = addr; + break; + case IND_SOURCE: + copy_page(dest, addr); + dest += PAGE_SIZE; + } + } +} + +void kexec_copy_flush(struct kimage *image) +{ + long i, nr_segments = image->nr_segments; + struct kexec_segment ranges[KEXEC_SEGMENT_MAX]; + + /* save the ranges on the stack to efficiently flush the icache */ + memcpy(ranges, image->segment, sizeof(ranges)); + + /* + * After this call we may not use anything allocated in dynamic + * memory, including *image. + * + * Only globals and the stack are allowed. + */ + copy_segments(image->head); + + /* + * we need to clear the icache for all dest pages sometime, + * including ones that were in place on the original copy + */ + for (i = 0; i < nr_segments; i++) + flush_icache_range(ranges[i].mem + KERNELBASE, + ranges[i].mem + KERNELBASE + + ranges[i].memsz); +} + +#ifdef CONFIG_SMP + +/* FIXME: we should schedule this function to be called on all cpus based + * on calling the interrupts, but we would like to call it off irq level + * so that the interrupt controller is clean. + */ +void kexec_smp_down(void *arg) +{ + if (ppc_md.kexec_cpu_down) + ppc_md.kexec_cpu_down(0, 1); + + local_irq_disable(); + kexec_smp_wait(); + /* NOTREACHED */ +} + +static void kexec_prepare_cpus(void) +{ + int my_cpu, i, notified=-1; + + smp_call_function(kexec_smp_down, NULL, 0, /* wait */0); + my_cpu = get_cpu(); + + /* check the others cpus are now down (via paca hw cpu id == -1) */ + for (i=0; i < NR_CPUS; i++) { + if (i == my_cpu) + continue; + + while (paca[i].hw_cpu_id != -1) { + barrier(); + if (!cpu_possible(i)) { + printk("kexec: cpu %d hw_cpu_id %d is not" + " possible, ignoring\n", + i, paca[i].hw_cpu_id); + break; + } + if (!cpu_online(i)) { + /* Fixme: this can be spinning in + * pSeries_secondary_wait with a paca + * waiting for it to go online. + */ + printk("kexec: cpu %d hw_cpu_id %d is not" + " online, ignoring\n", + i, paca[i].hw_cpu_id); + break; + } + if (i != notified) { + printk( "kexec: waiting for cpu %d (physical" + " %d) to go down\n", + i, paca[i].hw_cpu_id); + notified = i; + } + } + } + + /* after we tell the others to go down */ + if (ppc_md.kexec_cpu_down) + ppc_md.kexec_cpu_down(0, 0); + + put_cpu(); + + local_irq_disable(); +} + +#else /* ! SMP */ + +static void kexec_prepare_cpus(void) +{ + /* + * move the secondarys to us so that we can copy + * the new kernel 0-0x100 safely + * + * do this if kexec in setup.c ? + * + * We need to release the cpus if we are ever going from an + * UP to an SMP kernel. + */ + smp_release_cpus(); + if (ppc_md.kexec_cpu_down) + ppc_md.kexec_cpu_down(0, 0); + local_irq_disable(); +} + +#endif /* SMP */ + +/* + * kexec thread structure and stack. + * + * We need to make sure that this is 16384-byte aligned due to the + * way process stacks are handled. It also must be statically allocated + * or allocated as part of the kimage, because everything else may be + * overwritten when we copy the kexec image. We piggyback on the + * "init_task" linker section here to statically allocate a stack. + * + * We could use a smaller stack if we don't care about anything using + * current, but that audit has not been performed. + */ +union thread_union kexec_stack + __attribute__((__section__(".data.init_task"))) = { }; + +/* Our assembly helper, in kexec_stub.S */ +extern NORET_TYPE void kexec_sequence(void *newstack, unsigned long start, + void *image, void *control, + void (*clear_all)(void)) ATTRIB_NORET; + +/* too late to fail here */ +void machine_kexec(struct kimage *image) +{ + + /* prepare control code if any */ + + /* shutdown other cpus into our wait loop and quiesce interrupts */ + kexec_prepare_cpus(); + + /* switch to a staticly allocated stack. Based on irq stack code. + * XXX: the task struct will likely be invalid once we do the copy! + */ + kexec_stack.thread_info.task = current_thread_info()->task; + kexec_stack.thread_info.flags = 0; + + /* Some things are best done in assembly. Finding globals with + * a toc is easier in C, so pass in what we can. + */ + kexec_sequence(&kexec_stack, image->start, image, + page_address(image->control_code_page), + ppc_md.hpte_clear_all); + /* NOTREACHED */ +} + +/* Values we need to export to the second kernel via the device tree. */ +static unsigned long htab_base, htab_size, kernel_end; + +static struct property htab_base_prop = { + .name = "linux,htab-base", + .length = sizeof(unsigned long), + .value = (unsigned char *)&htab_base, +}; + +static struct property htab_size_prop = { + .name = "linux,htab-size", + .length = sizeof(unsigned long), + .value = (unsigned char *)&htab_size, +}; + +static struct property kernel_end_prop = { + .name = "linux,kernel-end", + .length = sizeof(unsigned long), + .value = (unsigned char *)&kernel_end, +}; + +static void __init export_htab_values(void) +{ + struct device_node *node; + + node = of_find_node_by_path("/chosen"); + if (!node) + return; + + kernel_end = __pa(_end); + prom_add_property(node, &kernel_end_prop); + + /* On machines with no htab htab_address is NULL */ + if (NULL == htab_address) + goto out; + + htab_base = __pa(htab_address); + prom_add_property(node, &htab_base_prop); + + htab_size = 1UL << ppc64_pft_size; + prom_add_property(node, &htab_size_prop); + + out: + of_node_put(node); +} + +void __init kexec_setup(void) +{ + export_htab_values(); +} diff --git a/arch/powerpc/kernel/module_64.c b/arch/powerpc/kernel/module_64.c new file mode 100644 index 00000000000..928b8581fcb --- /dev/null +++ b/arch/powerpc/kernel/module_64.c @@ -0,0 +1,455 @@ +/* Kernel module help for PPC64. + Copyright (C) 2001, 2003 Rusty Russell IBM Corporation. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ +#include +#include +#include +#include +#include +#include +#include + +/* FIXME: We don't do .init separately. To do this, we'd need to have + a separate r2 value in the init and core section, and stub between + them, too. + + Using a magic allocator which places modules within 32MB solves + this, and makes other things simpler. Anton? + --RR. */ +#if 0 +#define DEBUGP printk +#else +#define DEBUGP(fmt , ...) +#endif + +/* There's actually a third entry here, but it's unused */ +struct ppc64_opd_entry +{ + unsigned long funcaddr; + unsigned long r2; +}; + +/* Like PPC32, we need little trampolines to do > 24-bit jumps (into + the kernel itself). But on PPC64, these need to be used for every + jump, actually, to reset r2 (TOC+0x8000). */ +struct ppc64_stub_entry +{ + /* 28 byte jump instruction sequence (7 instructions) */ + unsigned char jump[28]; + unsigned char unused[4]; + /* Data for the above code */ + struct ppc64_opd_entry opd; +}; + +/* We use a stub to fix up r2 (TOC ptr) and to jump to the (external) + function which may be more than 24-bits away. We could simply + patch the new r2 value and function pointer into the stub, but it's + significantly shorter to put these values at the end of the stub + code, and patch the stub address (32-bits relative to the TOC ptr, + r2) into the stub. */ +static struct ppc64_stub_entry ppc64_stub = +{ .jump = { + 0x3d, 0x82, 0x00, 0x00, /* addis r12,r2, */ + 0x39, 0x8c, 0x00, 0x00, /* addi r12,r12, */ + /* Save current r2 value in magic place on the stack. */ + 0xf8, 0x41, 0x00, 0x28, /* std r2,40(r1) */ + 0xe9, 0x6c, 0x00, 0x20, /* ld r11,32(r12) */ + 0xe8, 0x4c, 0x00, 0x28, /* ld r2,40(r12) */ + 0x7d, 0x69, 0x03, 0xa6, /* mtctr r11 */ + 0x4e, 0x80, 0x04, 0x20 /* bctr */ +} }; + +/* Count how many different 24-bit relocations (different symbol, + different addend) */ +static unsigned int count_relocs(const Elf64_Rela *rela, unsigned int num) +{ + unsigned int i, j, ret = 0; + + /* FIXME: Only count external ones --RR */ + /* Sure, this is order(n^2), but it's usually short, and not + time critical */ + for (i = 0; i < num; i++) { + /* Only count 24-bit relocs, others don't need stubs */ + if (ELF64_R_TYPE(rela[i].r_info) != R_PPC_REL24) + continue; + for (j = 0; j < i; j++) { + /* If this addend appeared before, it's + already been counted */ + if (rela[i].r_info == rela[j].r_info + && rela[i].r_addend == rela[j].r_addend) + break; + } + if (j == i) ret++; + } + return ret; +} + +void *module_alloc(unsigned long size) +{ + if (size == 0) + return NULL; + + return vmalloc_exec(size); +} + +/* Free memory returned from module_alloc */ +void module_free(struct module *mod, void *module_region) +{ + vfree(module_region); + /* FIXME: If module_region == mod->init_region, trim exception + table entries. */ +} + +/* Get size of potential trampolines required. */ +static unsigned long get_stubs_size(const Elf64_Ehdr *hdr, + const Elf64_Shdr *sechdrs) +{ + /* One extra reloc so it's always 0-funcaddr terminated */ + unsigned long relocs = 1; + unsigned i; + + /* Every relocated section... */ + for (i = 1; i < hdr->e_shnum; i++) { + if (sechdrs[i].sh_type == SHT_RELA) { + DEBUGP("Found relocations in section %u\n", i); + DEBUGP("Ptr: %p. Number: %lu\n", + (void *)sechdrs[i].sh_addr, + sechdrs[i].sh_size / sizeof(Elf64_Rela)); + relocs += count_relocs((void *)sechdrs[i].sh_addr, + sechdrs[i].sh_size + / sizeof(Elf64_Rela)); + } + } + + DEBUGP("Looks like a total of %lu stubs, max\n", relocs); + return relocs * sizeof(struct ppc64_stub_entry); +} + +static void dedotify_versions(struct modversion_info *vers, + unsigned long size) +{ + struct modversion_info *end; + + for (end = (void *)vers + size; vers < end; vers++) + if (vers->name[0] == '.') + memmove(vers->name, vers->name+1, strlen(vers->name)); +} + +/* Undefined symbols which refer to .funcname, hack to funcname */ +static void dedotify(Elf64_Sym *syms, unsigned int numsyms, char *strtab) +{ + unsigned int i; + + for (i = 1; i < numsyms; i++) { + if (syms[i].st_shndx == SHN_UNDEF) { + char *name = strtab + syms[i].st_name; + if (name[0] == '.') + memmove(name, name+1, strlen(name)); + } + } +} + +int module_frob_arch_sections(Elf64_Ehdr *hdr, + Elf64_Shdr *sechdrs, + char *secstrings, + struct module *me) +{ + unsigned int i; + + /* Find .toc and .stubs sections, symtab and strtab */ + for (i = 1; i < hdr->e_shnum; i++) { + char *p; + if (strcmp(secstrings + sechdrs[i].sh_name, ".stubs") == 0) + me->arch.stubs_section = i; + else if (strcmp(secstrings + sechdrs[i].sh_name, ".toc") == 0) + me->arch.toc_section = i; + else if (strcmp(secstrings+sechdrs[i].sh_name,"__versions")==0) + dedotify_versions((void *)hdr + sechdrs[i].sh_offset, + sechdrs[i].sh_size); + + /* We don't handle .init for the moment: rename to _init */ + while ((p = strstr(secstrings + sechdrs[i].sh_name, ".init"))) + p[0] = '_'; + + if (sechdrs[i].sh_type == SHT_SYMTAB) + dedotify((void *)hdr + sechdrs[i].sh_offset, + sechdrs[i].sh_size / sizeof(Elf64_Sym), + (void *)hdr + + sechdrs[sechdrs[i].sh_link].sh_offset); + } + if (!me->arch.stubs_section || !me->arch.toc_section) { + printk("%s: doesn't contain .toc or .stubs.\n", me->name); + return -ENOEXEC; + } + + /* Override the stubs size */ + sechdrs[me->arch.stubs_section].sh_size = get_stubs_size(hdr, sechdrs); + return 0; +} + +int apply_relocate(Elf64_Shdr *sechdrs, + const char *strtab, + unsigned int symindex, + unsigned int relsec, + struct module *me) +{ + printk(KERN_ERR "%s: Non-ADD RELOCATION unsupported\n", me->name); + return -ENOEXEC; +} + +/* r2 is the TOC pointer: it actually points 0x8000 into the TOC (this + gives the value maximum span in an instruction which uses a signed + offset) */ +static inline unsigned long my_r2(Elf64_Shdr *sechdrs, struct module *me) +{ + return sechdrs[me->arch.toc_section].sh_addr + 0x8000; +} + +/* Both low and high 16 bits are added as SIGNED additions, so if low + 16 bits has high bit set, high 16 bits must be adjusted. These + macros do that (stolen from binutils). */ +#define PPC_LO(v) ((v) & 0xffff) +#define PPC_HI(v) (((v) >> 16) & 0xffff) +#define PPC_HA(v) PPC_HI ((v) + 0x8000) + +/* Patch stub to reference function and correct r2 value. */ +static inline int create_stub(Elf64_Shdr *sechdrs, + struct ppc64_stub_entry *entry, + struct ppc64_opd_entry *opd, + struct module *me) +{ + Elf64_Half *loc1, *loc2; + long reladdr; + + *entry = ppc64_stub; + + loc1 = (Elf64_Half *)&entry->jump[2]; + loc2 = (Elf64_Half *)&entry->jump[6]; + + /* Stub uses address relative to r2. */ + reladdr = (unsigned long)entry - my_r2(sechdrs, me); + if (reladdr > 0x7FFFFFFF || reladdr < -(0x80000000L)) { + printk("%s: Address %p of stub out of range of %p.\n", + me->name, (void *)reladdr, (void *)my_r2); + return 0; + } + DEBUGP("Stub %p get data from reladdr %li\n", entry, reladdr); + + *loc1 = PPC_HA(reladdr); + *loc2 = PPC_LO(reladdr); + entry->opd.funcaddr = opd->funcaddr; + entry->opd.r2 = opd->r2; + return 1; +} + +/* Create stub to jump to function described in this OPD: we need the + stub to set up the TOC ptr (r2) for the function. */ +static unsigned long stub_for_addr(Elf64_Shdr *sechdrs, + unsigned long opdaddr, + struct module *me) +{ + struct ppc64_stub_entry *stubs; + struct ppc64_opd_entry *opd = (void *)opdaddr; + unsigned int i, num_stubs; + + num_stubs = sechdrs[me->arch.stubs_section].sh_size / sizeof(*stubs); + + /* Find this stub, or if that fails, the next avail. entry */ + stubs = (void *)sechdrs[me->arch.stubs_section].sh_addr; + for (i = 0; stubs[i].opd.funcaddr; i++) { + BUG_ON(i >= num_stubs); + + if (stubs[i].opd.funcaddr == opd->funcaddr) + return (unsigned long)&stubs[i]; + } + + if (!create_stub(sechdrs, &stubs[i], opd, me)) + return 0; + + return (unsigned long)&stubs[i]; +} + +/* We expect a noop next: if it is, replace it with instruction to + restore r2. */ +static int restore_r2(u32 *instruction, struct module *me) +{ + if (*instruction != 0x60000000) { + printk("%s: Expect noop after relocate, got %08x\n", + me->name, *instruction); + return 0; + } + *instruction = 0xe8410028; /* ld r2,40(r1) */ + return 1; +} + +int apply_relocate_add(Elf64_Shdr *sechdrs, + const char *strtab, + unsigned int symindex, + unsigned int relsec, + struct module *me) +{ + unsigned int i; + Elf64_Rela *rela = (void *)sechdrs[relsec].sh_addr; + Elf64_Sym *sym; + unsigned long *location; + unsigned long value; + + DEBUGP("Applying ADD relocate section %u to %u\n", relsec, + sechdrs[relsec].sh_info); + for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rela); i++) { + /* This is where to make the change */ + location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr + + rela[i].r_offset; + /* This is the symbol it is referring to */ + sym = (Elf64_Sym *)sechdrs[symindex].sh_addr + + ELF64_R_SYM(rela[i].r_info); + + DEBUGP("RELOC at %p: %li-type as %s (%lu) + %li\n", + location, (long)ELF64_R_TYPE(rela[i].r_info), + strtab + sym->st_name, (unsigned long)sym->st_value, + (long)rela[i].r_addend); + + /* `Everything is relative'. */ + value = sym->st_value + rela[i].r_addend; + + switch (ELF64_R_TYPE(rela[i].r_info)) { + case R_PPC64_ADDR32: + /* Simply set it */ + *(u32 *)location = value; + break; + + case R_PPC64_ADDR64: + /* Simply set it */ + *(unsigned long *)location = value; + break; + + case R_PPC64_TOC: + *(unsigned long *)location = my_r2(sechdrs, me); + break; + + case R_PPC64_TOC16: + /* Subtact TOC pointer */ + value -= my_r2(sechdrs, me); + if (value + 0x8000 > 0xffff) { + printk("%s: bad TOC16 relocation (%lu)\n", + me->name, value); + return -ENOEXEC; + } + *((uint16_t *) location) + = (*((uint16_t *) location) & ~0xffff) + | (value & 0xffff); + break; + + case R_PPC64_TOC16_DS: + /* Subtact TOC pointer */ + value -= my_r2(sechdrs, me); + if ((value & 3) != 0 || value + 0x8000 > 0xffff) { + printk("%s: bad TOC16_DS relocation (%lu)\n", + me->name, value); + return -ENOEXEC; + } + *((uint16_t *) location) + = (*((uint16_t *) location) & ~0xfffc) + | (value & 0xfffc); + break; + + case R_PPC_REL24: + /* FIXME: Handle weak symbols here --RR */ + if (sym->st_shndx == SHN_UNDEF) { + /* External: go via stub */ + value = stub_for_addr(sechdrs, value, me); + if (!value) + return -ENOENT; + if (!restore_r2((u32 *)location + 1, me)) + return -ENOEXEC; + } + + /* Convert value to relative */ + value -= (unsigned long)location; + if (value + 0x2000000 > 0x3ffffff || (value & 3) != 0){ + printk("%s: REL24 %li out of range!\n", + me->name, (long int)value); + return -ENOEXEC; + } + + /* Only replace bits 2 through 26 */ + *(uint32_t *)location + = (*(uint32_t *)location & ~0x03fffffc) + | (value & 0x03fffffc); + break; + + default: + printk("%s: Unknown ADD relocation: %lu\n", + me->name, + (unsigned long)ELF64_R_TYPE(rela[i].r_info)); + return -ENOEXEC; + } + } + + return 0; +} + +LIST_HEAD(module_bug_list); + +int module_finalize(const Elf_Ehdr *hdr, + const Elf_Shdr *sechdrs, struct module *me) +{ + char *secstrings; + unsigned int i; + + me->arch.bug_table = NULL; + me->arch.num_bugs = 0; + + /* Find the __bug_table section, if present */ + secstrings = (char *)hdr + sechdrs[hdr->e_shstrndx].sh_offset; + for (i = 1; i < hdr->e_shnum; i++) { + if (strcmp(secstrings+sechdrs[i].sh_name, "__bug_table")) + continue; + me->arch.bug_table = (void *) sechdrs[i].sh_addr; + me->arch.num_bugs = sechdrs[i].sh_size / sizeof(struct bug_entry); + break; + } + + /* + * Strictly speaking this should have a spinlock to protect against + * traversals, but since we only traverse on BUG()s, a spinlock + * could potentially lead to deadlock and thus be counter-productive. + */ + list_add(&me->arch.bug_list, &module_bug_list); + + return 0; +} + +void module_arch_cleanup(struct module *mod) +{ + list_del(&mod->arch.bug_list); +} + +struct bug_entry *module_find_bug(unsigned long bugaddr) +{ + struct mod_arch_specific *mod; + unsigned int i; + struct bug_entry *bug; + + list_for_each_entry(mod, &module_bug_list, bug_list) { + bug = mod->bug_table; + for (i = 0; i < mod->num_bugs; ++i, ++bug) + if (bugaddr == bug->bug_addr) + return bug; + } + return NULL; +} diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c new file mode 100644 index 00000000000..3cef1b8f57f --- /dev/null +++ b/arch/powerpc/kernel/pci_64.c @@ -0,0 +1,1319 @@ +/* + * Port for PPC64 David Engebretsen, IBM Corp. + * Contains common pci routines for ppc64 platform, pSeries and iSeries brands. + * + * Copyright (C) 2003 Anton Blanchard , IBM + * Rework, based on alpha PCI code. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#undef DEBUG + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#ifdef DEBUG +#define DBG(fmt...) udbg_printf(fmt) +#else +#define DBG(fmt...) +#endif + +unsigned long pci_probe_only = 1; +unsigned long pci_assign_all_buses = 0; + +/* + * legal IO pages under MAX_ISA_PORT. This is to ensure we don't touch + * devices we don't have access to. + */ +unsigned long io_page_mask; + +EXPORT_SYMBOL(io_page_mask); + +#ifdef CONFIG_PPC_MULTIPLATFORM +static void fixup_resource(struct resource *res, struct pci_dev *dev); +static void do_bus_setup(struct pci_bus *bus); +#endif + +unsigned int pcibios_assign_all_busses(void) +{ + return pci_assign_all_buses; +} + +/* pci_io_base -- the base address from which io bars are offsets. + * This is the lowest I/O base address (so bar values are always positive), + * and it *must* be the start of ISA space if an ISA bus exists because + * ISA drivers use hard coded offsets. If no ISA bus exists a dummy + * page is mapped and isa_io_limit prevents access to it. + */ +unsigned long isa_io_base; /* NULL if no ISA bus */ +EXPORT_SYMBOL(isa_io_base); +unsigned long pci_io_base; +EXPORT_SYMBOL(pci_io_base); + +void iSeries_pcibios_init(void); + +LIST_HEAD(hose_list); + +struct dma_mapping_ops pci_dma_ops; +EXPORT_SYMBOL(pci_dma_ops); + +int global_phb_number; /* Global phb counter */ + +/* Cached ISA bridge dev. */ +struct pci_dev *ppc64_isabridge_dev = NULL; + +static void fixup_broken_pcnet32(struct pci_dev* dev) +{ + if ((dev->class>>8 == PCI_CLASS_NETWORK_ETHERNET)) { + dev->vendor = PCI_VENDOR_ID_AMD; + pci_write_config_word(dev, PCI_VENDOR_ID, PCI_VENDOR_ID_AMD); + } +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TRIDENT, PCI_ANY_ID, fixup_broken_pcnet32); + +void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, + struct resource *res) +{ + unsigned long offset = 0; + struct pci_controller *hose = pci_bus_to_host(dev->bus); + + if (!hose) + return; + + if (res->flags & IORESOURCE_IO) + offset = (unsigned long)hose->io_base_virt - pci_io_base; + + if (res->flags & IORESOURCE_MEM) + offset = hose->pci_mem_offset; + + region->start = res->start - offset; + region->end = res->end - offset; +} + +void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, + struct pci_bus_region *region) +{ + unsigned long offset = 0; + struct pci_controller *hose = pci_bus_to_host(dev->bus); + + if (!hose) + return; + + if (res->flags & IORESOURCE_IO) + offset = (unsigned long)hose->io_base_virt - pci_io_base; + + if (res->flags & IORESOURCE_MEM) + offset = hose->pci_mem_offset; + + res->start = region->start + offset; + res->end = region->end + offset; +} + +#ifdef CONFIG_HOTPLUG +EXPORT_SYMBOL(pcibios_resource_to_bus); +EXPORT_SYMBOL(pcibios_bus_to_resource); +#endif + +/* + * We need to avoid collisions with `mirrored' VGA ports + * and other strange ISA hardware, so we always want the + * addresses to be allocated in the 0x000-0x0ff region + * modulo 0x400. + * + * Why? Because some silly external IO cards only decode + * the low 10 bits of the IO address. The 0x00-0xff region + * is reserved for motherboard devices that decode all 16 + * bits, so it's ok to allocate at, say, 0x2800-0x28ff, + * but we want to try to avoid allocating at 0x2900-0x2bff + * which might have be mirrored at 0x0100-0x03ff.. + */ +void pcibios_align_resource(void *data, struct resource *res, + unsigned long size, unsigned long align) +{ + struct pci_dev *dev = data; + struct pci_controller *hose = pci_bus_to_host(dev->bus); + unsigned long start = res->start; + unsigned long alignto; + + if (res->flags & IORESOURCE_IO) { + unsigned long offset = (unsigned long)hose->io_base_virt - + pci_io_base; + /* Make sure we start at our min on all hoses */ + if (start - offset < PCIBIOS_MIN_IO) + start = PCIBIOS_MIN_IO + offset; + + /* + * Put everything into 0x00-0xff region modulo 0x400 + */ + if (start & 0x300) + start = (start + 0x3ff) & ~0x3ff; + + } else if (res->flags & IORESOURCE_MEM) { + /* Make sure we start at our min on all hoses */ + if (start - hose->pci_mem_offset < PCIBIOS_MIN_MEM) + start = PCIBIOS_MIN_MEM + hose->pci_mem_offset; + + /* Align to multiple of size of minimum base. */ + alignto = max(0x1000UL, align); + start = ALIGN(start, alignto); + } + + res->start = start; +} + +static DEFINE_SPINLOCK(hose_spinlock); + +/* + * pci_controller(phb) initialized common variables. + */ +void __devinit pci_setup_pci_controller(struct pci_controller *hose) +{ + memset(hose, 0, sizeof(struct pci_controller)); + + spin_lock(&hose_spinlock); + hose->global_number = global_phb_number++; + list_add_tail(&hose->list_node, &hose_list); + spin_unlock(&hose_spinlock); +} + +static void __init pcibios_claim_one_bus(struct pci_bus *b) +{ + struct pci_dev *dev; + struct pci_bus *child_bus; + + list_for_each_entry(dev, &b->devices, bus_list) { + int i; + + for (i = 0; i < PCI_NUM_RESOURCES; i++) { + struct resource *r = &dev->resource[i]; + + if (r->parent || !r->start || !r->flags) + continue; + pci_claim_resource(dev, i); + } + } + + list_for_each_entry(child_bus, &b->children, node) + pcibios_claim_one_bus(child_bus); +} + +#ifndef CONFIG_PPC_ISERIES +static void __init pcibios_claim_of_setup(void) +{ + struct pci_bus *b; + + list_for_each_entry(b, &pci_root_buses, node) + pcibios_claim_one_bus(b); +} +#endif + +#ifdef CONFIG_PPC_MULTIPLATFORM +static u32 get_int_prop(struct device_node *np, const char *name, u32 def) +{ + u32 *prop; + int len; + + prop = (u32 *) get_property(np, name, &len); + if (prop && len >= 4) + return *prop; + return def; +} + +static unsigned int pci_parse_of_flags(u32 addr0) +{ + unsigned int flags = 0; + + if (addr0 & 0x02000000) { + flags = IORESOURCE_MEM | PCI_BASE_ADDRESS_SPACE_MEMORY; + flags |= (addr0 >> 22) & PCI_BASE_ADDRESS_MEM_TYPE_64; + flags |= (addr0 >> 28) & PCI_BASE_ADDRESS_MEM_TYPE_1M; + if (addr0 & 0x40000000) + flags |= IORESOURCE_PREFETCH + | PCI_BASE_ADDRESS_MEM_PREFETCH; + } else if (addr0 & 0x01000000) + flags = IORESOURCE_IO | PCI_BASE_ADDRESS_SPACE_IO; + return flags; +} + +#define GET_64BIT(prop, i) ((((u64) (prop)[(i)]) << 32) | (prop)[(i)+1]) + +static void pci_parse_of_addrs(struct device_node *node, struct pci_dev *dev) +{ + u64 base, size; + unsigned int flags; + struct resource *res; + u32 *addrs, i; + int proplen; + + addrs = (u32 *) get_property(node, "assigned-addresses", &proplen); + if (!addrs) + return; + for (; proplen >= 20; proplen -= 20, addrs += 5) { + flags = pci_parse_of_flags(addrs[0]); + if (!flags) + continue; + base = GET_64BIT(addrs, 1); + size = GET_64BIT(addrs, 3); + if (!size) + continue; + i = addrs[0] & 0xff; + if (PCI_BASE_ADDRESS_0 <= i && i <= PCI_BASE_ADDRESS_5) { + res = &dev->resource[(i - PCI_BASE_ADDRESS_0) >> 2]; + } else if (i == dev->rom_base_reg) { + res = &dev->resource[PCI_ROM_RESOURCE]; + flags |= IORESOURCE_READONLY | IORESOURCE_CACHEABLE; + } else { + printk(KERN_ERR "PCI: bad cfg reg num 0x%x\n", i); + continue; + } + res->start = base; + res->end = base + size - 1; + res->flags = flags; + res->name = pci_name(dev); + fixup_resource(res, dev); + } +} + +struct pci_dev *of_create_pci_dev(struct device_node *node, + struct pci_bus *bus, int devfn) +{ + struct pci_dev *dev; + const char *type; + + dev = kmalloc(sizeof(struct pci_dev), GFP_KERNEL); + if (!dev) + return NULL; + type = get_property(node, "device_type", NULL); + if (type == NULL) + type = ""; + + memset(dev, 0, sizeof(struct pci_dev)); + dev->bus = bus; + dev->sysdata = node; + dev->dev.parent = bus->bridge; + dev->dev.bus = &pci_bus_type; + dev->devfn = devfn; + dev->multifunction = 0; /* maybe a lie? */ + + dev->vendor = get_int_prop(node, "vendor-id", 0xffff); + dev->device = get_int_prop(node, "device-id", 0xffff); + dev->subsystem_vendor = get_int_prop(node, "subsystem-vendor-id", 0); + dev->subsystem_device = get_int_prop(node, "subsystem-id", 0); + + dev->cfg_size = 256; /*pci_cfg_space_size(dev);*/ + + sprintf(pci_name(dev), "%04x:%02x:%02x.%d", pci_domain_nr(bus), + dev->bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn)); + dev->class = get_int_prop(node, "class-code", 0); + + dev->current_state = 4; /* unknown power state */ + + if (!strcmp(type, "pci")) { + /* a PCI-PCI bridge */ + dev->hdr_type = PCI_HEADER_TYPE_BRIDGE; + dev->rom_base_reg = PCI_ROM_ADDRESS1; + } else if (!strcmp(type, "cardbus")) { + dev->hdr_type = PCI_HEADER_TYPE_CARDBUS; + } else { + dev->hdr_type = PCI_HEADER_TYPE_NORMAL; + dev->rom_base_reg = PCI_ROM_ADDRESS; + dev->irq = NO_IRQ; + if (node->n_intrs > 0) { + dev->irq = node->intrs[0].line; + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, + dev->irq); + } + } + + pci_parse_of_addrs(node, dev); + + pci_device_add(dev, bus); + + /* XXX pci_scan_msi_device(dev); */ + + return dev; +} +EXPORT_SYMBOL(of_create_pci_dev); + +void __devinit of_scan_bus(struct device_node *node, + struct pci_bus *bus) +{ + struct device_node *child = NULL; + u32 *reg; + int reglen, devfn; + struct pci_dev *dev; + + while ((child = of_get_next_child(node, child)) != NULL) { + reg = (u32 *) get_property(child, "reg", ®len); + if (reg == NULL || reglen < 20) + continue; + devfn = (reg[0] >> 8) & 0xff; + /* create a new pci_dev for this device */ + dev = of_create_pci_dev(child, bus, devfn); + if (!dev) + continue; + if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE || + dev->hdr_type == PCI_HEADER_TYPE_CARDBUS) + of_scan_pci_bridge(child, dev); + } + + do_bus_setup(bus); +} +EXPORT_SYMBOL(of_scan_bus); + +void __devinit of_scan_pci_bridge(struct device_node *node, + struct pci_dev *dev) +{ + struct pci_bus *bus; + u32 *busrange, *ranges; + int len, i, mode; + struct resource *res; + unsigned int flags; + u64 size; + + /* parse bus-range property */ + busrange = (u32 *) get_property(node, "bus-range", &len); + if (busrange == NULL || len != 8) { + printk(KERN_ERR "Can't get bus-range for PCI-PCI bridge %s\n", + node->full_name); + return; + } + ranges = (u32 *) get_property(node, "ranges", &len); + if (ranges == NULL) { + printk(KERN_ERR "Can't get ranges for PCI-PCI bridge %s\n", + node->full_name); + return; + } + + bus = pci_add_new_bus(dev->bus, dev, busrange[0]); + if (!bus) { + printk(KERN_ERR "Failed to create pci bus for %s\n", + node->full_name); + return; + } + + bus->primary = dev->bus->number; + bus->subordinate = busrange[1]; + bus->bridge_ctl = 0; + bus->sysdata = node; + + /* parse ranges property */ + /* PCI #address-cells == 3 and #size-cells == 2 always */ + res = &dev->resource[PCI_BRIDGE_RESOURCES]; + for (i = 0; i < PCI_NUM_RESOURCES - PCI_BRIDGE_RESOURCES; ++i) { + res->flags = 0; + bus->resource[i] = res; + ++res; + } + i = 1; + for (; len >= 32; len -= 32, ranges += 8) { + flags = pci_parse_of_flags(ranges[0]); + size = GET_64BIT(ranges, 6); + if (flags == 0 || size == 0) + continue; + if (flags & IORESOURCE_IO) { + res = bus->resource[0]; + if (res->flags) { + printk(KERN_ERR "PCI: ignoring extra I/O range" + " for bridge %s\n", node->full_name); + continue; + } + } else { + if (i >= PCI_NUM_RESOURCES - PCI_BRIDGE_RESOURCES) { + printk(KERN_ERR "PCI: too many memory ranges" + " for bridge %s\n", node->full_name); + continue; + } + res = bus->resource[i]; + ++i; + } + res->start = GET_64BIT(ranges, 1); + res->end = res->start + size - 1; + res->flags = flags; + fixup_resource(res, dev); + } + sprintf(bus->name, "PCI Bus %04x:%02x", pci_domain_nr(bus), + bus->number); + + mode = PCI_PROBE_NORMAL; + if (ppc_md.pci_probe_mode) + mode = ppc_md.pci_probe_mode(bus); + if (mode == PCI_PROBE_DEVTREE) + of_scan_bus(node, bus); + else if (mode == PCI_PROBE_NORMAL) + pci_scan_child_bus(bus); +} +EXPORT_SYMBOL(of_scan_pci_bridge); +#endif /* CONFIG_PPC_MULTIPLATFORM */ + +void __devinit scan_phb(struct pci_controller *hose) +{ + struct pci_bus *bus; + struct device_node *node = hose->arch_data; + int i, mode; + struct resource *res; + + bus = pci_create_bus(NULL, hose->first_busno, hose->ops, node); + if (bus == NULL) { + printk(KERN_ERR "Failed to create bus for PCI domain %04x\n", + hose->global_number); + return; + } + bus->secondary = hose->first_busno; + hose->bus = bus; + + bus->resource[0] = res = &hose->io_resource; + if (res->flags && request_resource(&ioport_resource, res)) + printk(KERN_ERR "Failed to request PCI IO region " + "on PCI domain %04x\n", hose->global_number); + + for (i = 0; i < 3; ++i) { + res = &hose->mem_resources[i]; + bus->resource[i+1] = res; + if (res->flags && request_resource(&iomem_resource, res)) + printk(KERN_ERR "Failed to request PCI memory region " + "on PCI domain %04x\n", hose->global_number); + } + + mode = PCI_PROBE_NORMAL; +#ifdef CONFIG_PPC_MULTIPLATFORM + if (ppc_md.pci_probe_mode) + mode = ppc_md.pci_probe_mode(bus); + if (mode == PCI_PROBE_DEVTREE) { + bus->subordinate = hose->last_busno; + of_scan_bus(node, bus); + } +#endif /* CONFIG_PPC_MULTIPLATFORM */ + if (mode == PCI_PROBE_NORMAL) + hose->last_busno = bus->subordinate = pci_scan_child_bus(bus); + pci_bus_add_devices(bus); +} + +static int __init pcibios_init(void) +{ + struct pci_controller *hose, *tmp; + + /* For now, override phys_mem_access_prot. If we need it, + * later, we may move that initialization to each ppc_md + */ + ppc_md.phys_mem_access_prot = pci_phys_mem_access_prot; + +#ifdef CONFIG_PPC_ISERIES + iSeries_pcibios_init(); +#endif + + printk("PCI: Probing PCI hardware\n"); + + /* Scan all of the recorded PCI controllers. */ + list_for_each_entry_safe(hose, tmp, &hose_list, list_node) + scan_phb(hose); + +#ifndef CONFIG_PPC_ISERIES + if (pci_probe_only) + pcibios_claim_of_setup(); + else + /* FIXME: `else' will be removed when + pci_assign_unassigned_resources() is able to work + correctly with [partially] allocated PCI tree. */ + pci_assign_unassigned_resources(); +#endif /* !CONFIG_PPC_ISERIES */ + + /* Call machine dependent final fixup */ + if (ppc_md.pcibios_fixup) + ppc_md.pcibios_fixup(); + + /* Cache the location of the ISA bridge (if we have one) */ + ppc64_isabridge_dev = pci_get_class(PCI_CLASS_BRIDGE_ISA << 8, NULL); + if (ppc64_isabridge_dev != NULL) + printk("ISA bridge at %s\n", pci_name(ppc64_isabridge_dev)); + +#ifdef CONFIG_PPC_MULTIPLATFORM + /* map in PCI I/O space */ + phbs_remap_io(); +#endif + + printk("PCI: Probing PCI hardware done\n"); + + return 0; +} + +subsys_initcall(pcibios_init); + +char __init *pcibios_setup(char *str) +{ + return str; +} + +int pcibios_enable_device(struct pci_dev *dev, int mask) +{ + u16 cmd, oldcmd; + int i; + + pci_read_config_word(dev, PCI_COMMAND, &cmd); + oldcmd = cmd; + + for (i = 0; i < PCI_NUM_RESOURCES; i++) { + struct resource *res = &dev->resource[i]; + + /* Only set up the requested stuff */ + if (!(mask & (1<flags & IORESOURCE_IO) + cmd |= PCI_COMMAND_IO; + if (res->flags & IORESOURCE_MEM) + cmd |= PCI_COMMAND_MEMORY; + } + + if (cmd != oldcmd) { + printk(KERN_DEBUG "PCI: Enabling device: (%s), cmd %x\n", + pci_name(dev), cmd); + /* Enable the appropriate bits in the PCI command register. */ + pci_write_config_word(dev, PCI_COMMAND, cmd); + } + return 0; +} + +/* + * Return the domain number for this bus. + */ +int pci_domain_nr(struct pci_bus *bus) +{ +#ifdef CONFIG_PPC_ISERIES + return 0; +#else + struct pci_controller *hose = pci_bus_to_host(bus); + + return hose->global_number; +#endif +} + +EXPORT_SYMBOL(pci_domain_nr); + +/* Decide whether to display the domain number in /proc */ +int pci_proc_domain(struct pci_bus *bus) +{ +#ifdef CONFIG_PPC_ISERIES + return 0; +#else + struct pci_controller *hose = pci_bus_to_host(bus); + return hose->buid; +#endif +} + +/* + * Platform support for /proc/bus/pci/X/Y mmap()s, + * modelled on the sparc64 implementation by Dave Miller. + * -- paulus. + */ + +/* + * Adjust vm_pgoff of VMA such that it is the physical page offset + * corresponding to the 32-bit pci bus offset for DEV requested by the user. + * + * Basically, the user finds the base address for his device which he wishes + * to mmap. They read the 32-bit value from the config space base register, + * add whatever PAGE_SIZE multiple offset they wish, and feed this into the + * offset parameter of mmap on /proc/bus/pci/XXX for that device. + * + * Returns negative error code on failure, zero on success. + */ +static struct resource *__pci_mmap_make_offset(struct pci_dev *dev, + unsigned long *offset, + enum pci_mmap_state mmap_state) +{ + struct pci_controller *hose = pci_bus_to_host(dev->bus); + unsigned long io_offset = 0; + int i, res_bit; + + if (hose == 0) + return NULL; /* should never happen */ + + /* If memory, add on the PCI bridge address offset */ + if (mmap_state == pci_mmap_mem) { + *offset += hose->pci_mem_offset; + res_bit = IORESOURCE_MEM; + } else { + io_offset = (unsigned long)hose->io_base_virt - pci_io_base; + *offset += io_offset; + res_bit = IORESOURCE_IO; + } + + /* + * Check that the offset requested corresponds to one of the + * resources of the device. + */ + for (i = 0; i <= PCI_ROM_RESOURCE; i++) { + struct resource *rp = &dev->resource[i]; + int flags = rp->flags; + + /* treat ROM as memory (should be already) */ + if (i == PCI_ROM_RESOURCE) + flags |= IORESOURCE_MEM; + + /* Active and same type? */ + if ((flags & res_bit) == 0) + continue; + + /* In the range of this resource? */ + if (*offset < (rp->start & PAGE_MASK) || *offset > rp->end) + continue; + + /* found it! construct the final physical address */ + if (mmap_state == pci_mmap_io) + *offset += hose->io_base_phys - io_offset; + return rp; + } + + return NULL; +} + +/* + * Set vm_page_prot of VMA, as appropriate for this architecture, for a pci + * device mapping. + */ +static pgprot_t __pci_mmap_set_pgprot(struct pci_dev *dev, struct resource *rp, + pgprot_t protection, + enum pci_mmap_state mmap_state, + int write_combine) +{ + unsigned long prot = pgprot_val(protection); + + /* Write combine is always 0 on non-memory space mappings. On + * memory space, if the user didn't pass 1, we check for a + * "prefetchable" resource. This is a bit hackish, but we use + * this to workaround the inability of /sysfs to provide a write + * combine bit + */ + if (mmap_state != pci_mmap_mem) + write_combine = 0; + else if (write_combine == 0) { + if (rp->flags & IORESOURCE_PREFETCH) + write_combine = 1; + } + + /* XXX would be nice to have a way to ask for write-through */ + prot |= _PAGE_NO_CACHE; + if (write_combine) + prot &= ~_PAGE_GUARDED; + else + prot |= _PAGE_GUARDED; + + printk("PCI map for %s:%lx, prot: %lx\n", pci_name(dev), rp->start, + prot); + + return __pgprot(prot); +} + +/* + * This one is used by /dev/mem and fbdev who have no clue about the + * PCI device, it tries to find the PCI device first and calls the + * above routine + */ +pgprot_t pci_phys_mem_access_prot(struct file *file, + unsigned long pfn, + unsigned long size, + pgprot_t protection) +{ + struct pci_dev *pdev = NULL; + struct resource *found = NULL; + unsigned long prot = pgprot_val(protection); + unsigned long offset = pfn << PAGE_SHIFT; + int i; + + if (page_is_ram(pfn)) + return __pgprot(prot); + + prot |= _PAGE_NO_CACHE | _PAGE_GUARDED; + + for_each_pci_dev(pdev) { + for (i = 0; i <= PCI_ROM_RESOURCE; i++) { + struct resource *rp = &pdev->resource[i]; + int flags = rp->flags; + + /* Active and same type? */ + if ((flags & IORESOURCE_MEM) == 0) + continue; + /* In the range of this resource? */ + if (offset < (rp->start & PAGE_MASK) || + offset > rp->end) + continue; + found = rp; + break; + } + if (found) + break; + } + if (found) { + if (found->flags & IORESOURCE_PREFETCH) + prot &= ~_PAGE_GUARDED; + pci_dev_put(pdev); + } + + DBG("non-PCI map for %lx, prot: %lx\n", offset, prot); + + return __pgprot(prot); +} + + +/* + * Perform the actual remap of the pages for a PCI device mapping, as + * appropriate for this architecture. The region in the process to map + * is described by vm_start and vm_end members of VMA, the base physical + * address is found in vm_pgoff. + * The pci device structure is provided so that architectures may make mapping + * decisions on a per-device or per-bus basis. + * + * Returns a negative error code on failure, zero on success. + */ +int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, + enum pci_mmap_state mmap_state, + int write_combine) +{ + unsigned long offset = vma->vm_pgoff << PAGE_SHIFT; + struct resource *rp; + int ret; + + rp = __pci_mmap_make_offset(dev, &offset, mmap_state); + if (rp == NULL) + return -EINVAL; + + vma->vm_pgoff = offset >> PAGE_SHIFT; + vma->vm_flags |= VM_SHM | VM_LOCKED | VM_IO; + vma->vm_page_prot = __pci_mmap_set_pgprot(dev, rp, + vma->vm_page_prot, + mmap_state, write_combine); + + ret = remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff, + vma->vm_end - vma->vm_start, vma->vm_page_prot); + + return ret; +} + +#ifdef CONFIG_PPC_MULTIPLATFORM +static ssize_t pci_show_devspec(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct pci_dev *pdev; + struct device_node *np; + + pdev = to_pci_dev (dev); + np = pci_device_to_OF_node(pdev); + if (np == NULL || np->full_name == NULL) + return 0; + return sprintf(buf, "%s", np->full_name); +} +static DEVICE_ATTR(devspec, S_IRUGO, pci_show_devspec, NULL); +#endif /* CONFIG_PPC_MULTIPLATFORM */ + +void pcibios_add_platform_entries(struct pci_dev *pdev) +{ +#ifdef CONFIG_PPC_MULTIPLATFORM + device_create_file(&pdev->dev, &dev_attr_devspec); +#endif /* CONFIG_PPC_MULTIPLATFORM */ +} + +#ifdef CONFIG_PPC_MULTIPLATFORM + +#define ISA_SPACE_MASK 0x1 +#define ISA_SPACE_IO 0x1 + +static void __devinit pci_process_ISA_OF_ranges(struct device_node *isa_node, + unsigned long phb_io_base_phys, + void __iomem * phb_io_base_virt) +{ + struct isa_range *range; + unsigned long pci_addr; + unsigned int isa_addr; + unsigned int size; + int rlen = 0; + + range = (struct isa_range *) get_property(isa_node, "ranges", &rlen); + if (range == NULL || (rlen < sizeof(struct isa_range))) { + printk(KERN_ERR "no ISA ranges or unexpected isa range size," + "mapping 64k\n"); + __ioremap_explicit(phb_io_base_phys, + (unsigned long)phb_io_base_virt, + 0x10000, _PAGE_NO_CACHE | _PAGE_GUARDED); + return; + } + + /* From "ISA Binding to 1275" + * The ranges property is laid out as an array of elements, + * each of which comprises: + * cells 0 - 1: an ISA address + * cells 2 - 4: a PCI address + * (size depending on dev->n_addr_cells) + * cell 5: the size of the range + */ + if ((range->isa_addr.a_hi && ISA_SPACE_MASK) == ISA_SPACE_IO) { + isa_addr = range->isa_addr.a_lo; + pci_addr = (unsigned long) range->pci_addr.a_mid << 32 | + range->pci_addr.a_lo; + + /* Assume these are both zero */ + if ((pci_addr != 0) || (isa_addr != 0)) { + printk(KERN_ERR "unexpected isa to pci mapping: %s\n", + __FUNCTION__); + return; + } + + size = PAGE_ALIGN(range->size); + + __ioremap_explicit(phb_io_base_phys, + (unsigned long) phb_io_base_virt, + size, _PAGE_NO_CACHE | _PAGE_GUARDED); + } +} + +void __devinit pci_process_bridge_OF_ranges(struct pci_controller *hose, + struct device_node *dev, int prim) +{ + unsigned int *ranges, pci_space; + unsigned long size; + int rlen = 0; + int memno = 0; + struct resource *res; + int np, na = prom_n_addr_cells(dev); + unsigned long pci_addr, cpu_phys_addr; + + np = na + 5; + + /* From "PCI Binding to 1275" + * The ranges property is laid out as an array of elements, + * each of which comprises: + * cells 0 - 2: a PCI address + * cells 3 or 3+4: a CPU physical address + * (size depending on dev->n_addr_cells) + * cells 4+5 or 5+6: the size of the range + */ + rlen = 0; + hose->io_base_phys = 0; + ranges = (unsigned int *) get_property(dev, "ranges", &rlen); + while ((rlen -= np * sizeof(unsigned int)) >= 0) { + res = NULL; + pci_space = ranges[0]; + pci_addr = ((unsigned long)ranges[1] << 32) | ranges[2]; + + cpu_phys_addr = ranges[3]; + if (na >= 2) + cpu_phys_addr = (cpu_phys_addr << 32) | ranges[4]; + + size = ((unsigned long)ranges[na+3] << 32) | ranges[na+4]; + ranges += np; + if (size == 0) + continue; + + /* Now consume following elements while they are contiguous */ + while (rlen >= np * sizeof(unsigned int)) { + unsigned long addr, phys; + + if (ranges[0] != pci_space) + break; + addr = ((unsigned long)ranges[1] << 32) | ranges[2]; + phys = ranges[3]; + if (na >= 2) + phys = (phys << 32) | ranges[4]; + if (addr != pci_addr + size || + phys != cpu_phys_addr + size) + break; + + size += ((unsigned long)ranges[na+3] << 32) + | ranges[na+4]; + ranges += np; + rlen -= np * sizeof(unsigned int); + } + + switch ((pci_space >> 24) & 0x3) { + case 1: /* I/O space */ + hose->io_base_phys = cpu_phys_addr; + hose->pci_io_size = size; + + res = &hose->io_resource; + res->flags = IORESOURCE_IO; + res->start = pci_addr; + DBG("phb%d: IO 0x%lx -> 0x%lx\n", hose->global_number, + res->start, res->start + size - 1); + break; + case 2: /* memory space */ + memno = 0; + while (memno < 3 && hose->mem_resources[memno].flags) + ++memno; + + if (memno == 0) + hose->pci_mem_offset = cpu_phys_addr - pci_addr; + if (memno < 3) { + res = &hose->mem_resources[memno]; + res->flags = IORESOURCE_MEM; + res->start = cpu_phys_addr; + DBG("phb%d: MEM 0x%lx -> 0x%lx\n", hose->global_number, + res->start, res->start + size - 1); + } + break; + } + if (res != NULL) { + res->name = dev->full_name; + res->end = res->start + size - 1; + res->parent = NULL; + res->sibling = NULL; + res->child = NULL; + } + } +} + +void __init pci_setup_phb_io(struct pci_controller *hose, int primary) +{ + unsigned long size = hose->pci_io_size; + unsigned long io_virt_offset; + struct resource *res; + struct device_node *isa_dn; + + hose->io_base_virt = reserve_phb_iospace(size); + DBG("phb%d io_base_phys 0x%lx io_base_virt 0x%lx\n", + hose->global_number, hose->io_base_phys, + (unsigned long) hose->io_base_virt); + + if (primary) { + pci_io_base = (unsigned long)hose->io_base_virt; + isa_dn = of_find_node_by_type(NULL, "isa"); + if (isa_dn) { + isa_io_base = pci_io_base; + pci_process_ISA_OF_ranges(isa_dn, hose->io_base_phys, + hose->io_base_virt); + of_node_put(isa_dn); + /* Allow all IO */ + io_page_mask = -1; + } + } + + io_virt_offset = (unsigned long)hose->io_base_virt - pci_io_base; + res = &hose->io_resource; + res->start += io_virt_offset; + res->end += io_virt_offset; +} + +void __devinit pci_setup_phb_io_dynamic(struct pci_controller *hose, + int primary) +{ + unsigned long size = hose->pci_io_size; + unsigned long io_virt_offset; + struct resource *res; + + hose->io_base_virt = __ioremap(hose->io_base_phys, size, + _PAGE_NO_CACHE | _PAGE_GUARDED); + DBG("phb%d io_base_phys 0x%lx io_base_virt 0x%lx\n", + hose->global_number, hose->io_base_phys, + (unsigned long) hose->io_base_virt); + + if (primary) + pci_io_base = (unsigned long)hose->io_base_virt; + + io_virt_offset = (unsigned long)hose->io_base_virt - pci_io_base; + res = &hose->io_resource; + res->start += io_virt_offset; + res->end += io_virt_offset; +} + + +static int get_bus_io_range(struct pci_bus *bus, unsigned long *start_phys, + unsigned long *start_virt, unsigned long *size) +{ + struct pci_controller *hose = pci_bus_to_host(bus); + struct pci_bus_region region; + struct resource *res; + + if (bus->self) { + res = bus->resource[0]; + pcibios_resource_to_bus(bus->self, ®ion, res); + *start_phys = hose->io_base_phys + region.start; + *start_virt = (unsigned long) hose->io_base_virt + + region.start; + if (region.end > region.start) + *size = region.end - region.start + 1; + else { + printk("%s(): unexpected region 0x%lx->0x%lx\n", + __FUNCTION__, region.start, region.end); + return 1; + } + + } else { + /* Root Bus */ + res = &hose->io_resource; + *start_phys = hose->io_base_phys; + *start_virt = (unsigned long) hose->io_base_virt; + if (res->end > res->start) + *size = res->end - res->start + 1; + else { + printk("%s(): unexpected region 0x%lx->0x%lx\n", + __FUNCTION__, res->start, res->end); + return 1; + } + } + + return 0; +} + +int unmap_bus_range(struct pci_bus *bus) +{ + unsigned long start_phys; + unsigned long start_virt; + unsigned long size; + + if (!bus) { + printk(KERN_ERR "%s() expected bus\n", __FUNCTION__); + return 1; + } + + if (get_bus_io_range(bus, &start_phys, &start_virt, &size)) + return 1; + if (iounmap_explicit((void __iomem *) start_virt, size)) + return 1; + + return 0; +} +EXPORT_SYMBOL(unmap_bus_range); + +int remap_bus_range(struct pci_bus *bus) +{ + unsigned long start_phys; + unsigned long start_virt; + unsigned long size; + + if (!bus) { + printk(KERN_ERR "%s() expected bus\n", __FUNCTION__); + return 1; + } + + + if (get_bus_io_range(bus, &start_phys, &start_virt, &size)) + return 1; + printk("mapping IO %lx -> %lx, size: %lx\n", start_phys, start_virt, size); + if (__ioremap_explicit(start_phys, start_virt, size, + _PAGE_NO_CACHE | _PAGE_GUARDED)) + return 1; + + return 0; +} +EXPORT_SYMBOL(remap_bus_range); + +void phbs_remap_io(void) +{ + struct pci_controller *hose, *tmp; + + list_for_each_entry_safe(hose, tmp, &hose_list, list_node) + remap_bus_range(hose->bus); +} + +/* + * ppc64 can have multifunction devices that do not respond to function 0. + * In this case we must scan all functions. + * XXX this can go now, we use the OF device tree in all the + * cases that caused problems. -- paulus + */ +int pcibios_scan_all_fns(struct pci_bus *bus, int devfn) +{ + return 0; +} + +static void __devinit fixup_resource(struct resource *res, struct pci_dev *dev) +{ + struct pci_controller *hose = pci_bus_to_host(dev->bus); + unsigned long start, end, mask, offset; + + if (res->flags & IORESOURCE_IO) { + offset = (unsigned long)hose->io_base_virt - pci_io_base; + + start = res->start += offset; + end = res->end += offset; + + /* Need to allow IO access to pages that are in the + ISA range */ + if (start < MAX_ISA_PORT) { + if (end > MAX_ISA_PORT) + end = MAX_ISA_PORT; + + start >>= PAGE_SHIFT; + end >>= PAGE_SHIFT; + + /* get the range of pages for the map */ + mask = ((1 << (end+1)) - 1) ^ ((1 << start) - 1); + io_page_mask |= mask; + } + } else if (res->flags & IORESOURCE_MEM) { + res->start += hose->pci_mem_offset; + res->end += hose->pci_mem_offset; + } +} + +void __devinit pcibios_fixup_device_resources(struct pci_dev *dev, + struct pci_bus *bus) +{ + /* Update device resources. */ + int i; + + for (i = 0; i < PCI_NUM_RESOURCES; i++) + if (dev->resource[i].flags) + fixup_resource(&dev->resource[i], dev); +} +EXPORT_SYMBOL(pcibios_fixup_device_resources); + +static void __devinit do_bus_setup(struct pci_bus *bus) +{ + struct pci_dev *dev; + + ppc_md.iommu_bus_setup(bus); + + list_for_each_entry(dev, &bus->devices, bus_list) + ppc_md.iommu_dev_setup(dev); + + if (ppc_md.irq_bus_setup) + ppc_md.irq_bus_setup(bus); +} + +void __devinit pcibios_fixup_bus(struct pci_bus *bus) +{ + struct pci_dev *dev = bus->self; + + if (dev && pci_probe_only && + (dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) { + /* This is a subordinate bridge */ + + pci_read_bridge_bases(bus); + pcibios_fixup_device_resources(dev, bus); + } + + do_bus_setup(bus); + + if (!pci_probe_only) + return; + + list_for_each_entry(dev, &bus->devices, bus_list) + if ((dev->class >> 8) != PCI_CLASS_BRIDGE_PCI) + pcibios_fixup_device_resources(dev, bus); +} +EXPORT_SYMBOL(pcibios_fixup_bus); + +/* + * Reads the interrupt pin to determine if interrupt is use by card. + * If the interrupt is used, then gets the interrupt line from the + * openfirmware and sets it in the pci_dev and pci_config line. + */ +int pci_read_irq_line(struct pci_dev *pci_dev) +{ + u8 intpin; + struct device_node *node; + + pci_read_config_byte(pci_dev, PCI_INTERRUPT_PIN, &intpin); + if (intpin == 0) + return 0; + + node = pci_device_to_OF_node(pci_dev); + if (node == NULL) + return -1; + + if (node->n_intrs == 0) + return -1; + + pci_dev->irq = node->intrs[0].line; + + pci_write_config_byte(pci_dev, PCI_INTERRUPT_LINE, pci_dev->irq); + + return 0; +} +EXPORT_SYMBOL(pci_read_irq_line); + +void pci_resource_to_user(const struct pci_dev *dev, int bar, + const struct resource *rsrc, + u64 *start, u64 *end) +{ + struct pci_controller *hose = pci_bus_to_host(dev->bus); + unsigned long offset = 0; + + if (hose == NULL) + return; + + if (rsrc->flags & IORESOURCE_IO) + offset = pci_io_base - (unsigned long)hose->io_base_virt + + hose->io_base_phys; + + *start = rsrc->start + offset; + *end = rsrc->end + offset; +} + +#endif /* CONFIG_PPC_MULTIPLATFORM */ + + +#define IOBASE_BRIDGE_NUMBER 0 +#define IOBASE_MEMORY 1 +#define IOBASE_IO 2 +#define IOBASE_ISA_IO 3 +#define IOBASE_ISA_MEM 4 + +long sys_pciconfig_iobase(long which, unsigned long in_bus, + unsigned long in_devfn) +{ + struct pci_controller* hose; + struct list_head *ln; + struct pci_bus *bus = NULL; + struct device_node *hose_node; + + /* Argh ! Please forgive me for that hack, but that's the + * simplest way to get existing XFree to not lockup on some + * G5 machines... So when something asks for bus 0 io base + * (bus 0 is HT root), we return the AGP one instead. + */ + if (machine_is_compatible("MacRISC4")) + if (in_bus == 0) + in_bus = 0xf0; + + /* That syscall isn't quite compatible with PCI domains, but it's + * used on pre-domains setup. We return the first match + */ + + for (ln = pci_root_buses.next; ln != &pci_root_buses; ln = ln->next) { + bus = pci_bus_b(ln); + if (in_bus >= bus->number && in_bus < (bus->number + bus->subordinate)) + break; + bus = NULL; + } + if (bus == NULL || bus->sysdata == NULL) + return -ENODEV; + + hose_node = (struct device_node *)bus->sysdata; + hose = PCI_DN(hose_node)->phb; + + switch (which) { + case IOBASE_BRIDGE_NUMBER: + return (long)hose->first_busno; + case IOBASE_MEMORY: + return (long)hose->pci_mem_offset; + case IOBASE_IO: + return (long)hose->io_base_phys; + case IOBASE_ISA_IO: + return (long)isa_io_base; + case IOBASE_ISA_MEM: + return -EINVAL; + } + + return -EOPNOTSUPP; +} diff --git a/arch/powerpc/kernel/pci_direct_iommu.c b/arch/powerpc/kernel/pci_direct_iommu.c new file mode 100644 index 00000000000..e1a32f802c0 --- /dev/null +++ b/arch/powerpc/kernel/pci_direct_iommu.c @@ -0,0 +1,94 @@ +/* + * Support for DMA from PCI devices to main memory on + * machines without an iommu or with directly addressable + * RAM (typically a pmac with 2Gb of RAM or less) + * + * Copyright (C) 2003 Benjamin Herrenschmidt (benh@kernel.crashing.org) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include + +static void *pci_direct_alloc_coherent(struct device *hwdev, size_t size, + dma_addr_t *dma_handle, gfp_t flag) +{ + void *ret; + + ret = (void *)__get_free_pages(flag, get_order(size)); + if (ret != NULL) { + memset(ret, 0, size); + *dma_handle = virt_to_abs(ret); + } + return ret; +} + +static void pci_direct_free_coherent(struct device *hwdev, size_t size, + void *vaddr, dma_addr_t dma_handle) +{ + free_pages((unsigned long)vaddr, get_order(size)); +} + +static dma_addr_t pci_direct_map_single(struct device *hwdev, void *ptr, + size_t size, enum dma_data_direction direction) +{ + return virt_to_abs(ptr); +} + +static void pci_direct_unmap_single(struct device *hwdev, dma_addr_t dma_addr, + size_t size, enum dma_data_direction direction) +{ +} + +static int pci_direct_map_sg(struct device *hwdev, struct scatterlist *sg, + int nents, enum dma_data_direction direction) +{ + int i; + + for (i = 0; i < nents; i++, sg++) { + sg->dma_address = page_to_phys(sg->page) + sg->offset; + sg->dma_length = sg->length; + } + + return nents; +} + +static void pci_direct_unmap_sg(struct device *hwdev, struct scatterlist *sg, + int nents, enum dma_data_direction direction) +{ +} + +static int pci_direct_dma_supported(struct device *dev, u64 mask) +{ + return mask < 0x100000000ull; +} + +void __init pci_direct_iommu_init(void) +{ + pci_dma_ops.alloc_coherent = pci_direct_alloc_coherent; + pci_dma_ops.free_coherent = pci_direct_free_coherent; + pci_dma_ops.map_single = pci_direct_map_single; + pci_dma_ops.unmap_single = pci_direct_unmap_single; + pci_dma_ops.map_sg = pci_direct_map_sg; + pci_dma_ops.unmap_sg = pci_direct_unmap_sg; + pci_dma_ops.dma_supported = pci_direct_dma_supported; +} diff --git a/arch/powerpc/kernel/pci_dn.c b/arch/powerpc/kernel/pci_dn.c new file mode 100644 index 00000000000..12c4c9e9bbc --- /dev/null +++ b/arch/powerpc/kernel/pci_dn.c @@ -0,0 +1,230 @@ +/* + * pci_dn.c + * + * Copyright (C) 2001 Todd Inglett, IBM Corporation + * + * PCI manipulation via device_nodes. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +/* + * Traverse_func that inits the PCI fields of the device node. + * NOTE: this *must* be done before read/write config to the device. + */ +static void * __devinit update_dn_pci_info(struct device_node *dn, void *data) +{ + struct pci_controller *phb = data; + int *type = (int *)get_property(dn, "ibm,pci-config-space-type", NULL); + u32 *regs; + struct pci_dn *pdn; + + if (mem_init_done) + pdn = kmalloc(sizeof(*pdn), GFP_KERNEL); + else + pdn = alloc_bootmem(sizeof(*pdn)); + if (pdn == NULL) + return NULL; + memset(pdn, 0, sizeof(*pdn)); + dn->data = pdn; + pdn->node = dn; + pdn->phb = phb; + regs = (u32 *)get_property(dn, "reg", NULL); + if (regs) { + /* First register entry is addr (00BBSS00) */ + pdn->busno = (regs[0] >> 16) & 0xff; + pdn->devfn = (regs[0] >> 8) & 0xff; + } + + pdn->pci_ext_config_space = (type && *type == 1); + return NULL; +} + +/* + * Traverse a device tree stopping each PCI device in the tree. + * This is done depth first. As each node is processed, a "pre" + * function is called and the children are processed recursively. + * + * The "pre" func returns a value. If non-zero is returned from + * the "pre" func, the traversal stops and this value is returned. + * This return value is useful when using traverse as a method of + * finding a device. + * + * NOTE: we do not run the func for devices that do not appear to + * be PCI except for the start node which we assume (this is good + * because the start node is often a phb which may be missing PCI + * properties). + * We use the class-code as an indicator. If we run into + * one of these nodes we also assume its siblings are non-pci for + * performance. + */ +void *traverse_pci_devices(struct device_node *start, traverse_func pre, + void *data) +{ + struct device_node *dn, *nextdn; + void *ret; + + /* We started with a phb, iterate all childs */ + for (dn = start->child; dn; dn = nextdn) { + u32 *classp, class; + + nextdn = NULL; + classp = (u32 *)get_property(dn, "class-code", NULL); + class = classp ? *classp : 0; + + if (pre && ((ret = pre(dn, data)) != NULL)) + return ret; + + /* If we are a PCI bridge, go down */ + if (dn->child && ((class >> 8) == PCI_CLASS_BRIDGE_PCI || + (class >> 8) == PCI_CLASS_BRIDGE_CARDBUS)) + /* Depth first...do children */ + nextdn = dn->child; + else if (dn->sibling) + /* ok, try next sibling instead. */ + nextdn = dn->sibling; + if (!nextdn) { + /* Walk up to next valid sibling. */ + do { + dn = dn->parent; + if (dn == start) + return NULL; + } while (dn->sibling == NULL); + nextdn = dn->sibling; + } + } + return NULL; +} + +/** + * pci_devs_phb_init_dynamic - setup pci devices under this PHB + * phb: pci-to-host bridge (top-level bridge connecting to cpu) + * + * This routine is called both during boot, (before the memory + * subsystem is set up, before kmalloc is valid) and during the + * dynamic lpar operation of adding a PHB to a running system. + */ +void __devinit pci_devs_phb_init_dynamic(struct pci_controller *phb) +{ + struct device_node * dn = (struct device_node *) phb->arch_data; + struct pci_dn *pdn; + + /* PHB nodes themselves must not match */ + update_dn_pci_info(dn, phb); + pdn = dn->data; + if (pdn) { + pdn->devfn = pdn->busno = -1; + pdn->phb = phb; + } + + /* Update dn->phb ptrs for new phb and children devices */ + traverse_pci_devices(dn, update_dn_pci_info, phb); +} + +/* + * Traversal func that looks for a value. + * If found, the pci_dn is returned (thus terminating the traversal). + */ +static void *is_devfn_node(struct device_node *dn, void *data) +{ + int busno = ((unsigned long)data >> 8) & 0xff; + int devfn = ((unsigned long)data) & 0xff; + struct pci_dn *pci = dn->data; + + if (pci && (devfn == pci->devfn) && (busno == pci->busno)) + return dn; + return NULL; +} + +/* + * This is the "slow" path for looking up a device_node from a + * pci_dev. It will hunt for the device under its parent's + * phb and then update sysdata for a future fastpath. + * + * It may also do fixups on the actual device since this happens + * on the first read/write. + * + * Note that it also must deal with devices that don't exist. + * In this case it may probe for real hardware ("just in case") + * and add a device_node to the device tree if necessary. + * + */ +struct device_node *fetch_dev_dn(struct pci_dev *dev) +{ + struct device_node *orig_dn = dev->sysdata; + struct device_node *dn; + unsigned long searchval = (dev->bus->number << 8) | dev->devfn; + + dn = traverse_pci_devices(orig_dn, is_devfn_node, (void *)searchval); + if (dn) + dev->sysdata = dn; + return dn; +} +EXPORT_SYMBOL(fetch_dev_dn); + +static int pci_dn_reconfig_notifier(struct notifier_block *nb, unsigned long action, void *node) +{ + struct device_node *np = node; + struct pci_dn *pci = NULL; + int err = NOTIFY_OK; + + switch (action) { + case PSERIES_RECONFIG_ADD: + pci = np->parent->data; + if (pci) + update_dn_pci_info(np, pci->phb); + break; + default: + err = NOTIFY_DONE; + break; + } + return err; +} + +static struct notifier_block pci_dn_reconfig_nb = { + .notifier_call = pci_dn_reconfig_notifier, +}; + +/** + * pci_devs_phb_init - Initialize phbs and pci devs under them. + * + * This routine walks over all phb's (pci-host bridges) on the + * system, and sets up assorted pci-related structures + * (including pci info in the device node structs) for each + * pci device found underneath. This routine runs once, + * early in the boot sequence. + */ +void __init pci_devs_phb_init(void) +{ + struct pci_controller *phb, *tmp; + + /* This must be done first so the device nodes have valid pci info! */ + list_for_each_entry_safe(phb, tmp, &hose_list, list_node) + pci_devs_phb_init_dynamic(phb); + + pSeries_reconfig_notifier_register(&pci_dn_reconfig_nb); +} diff --git a/arch/powerpc/kernel/pci_iommu.c b/arch/powerpc/kernel/pci_iommu.c new file mode 100644 index 00000000000..bdf15dbbf4f --- /dev/null +++ b/arch/powerpc/kernel/pci_iommu.c @@ -0,0 +1,128 @@ +/* + * arch/ppc64/kernel/pci_iommu.c + * Copyright (C) 2001 Mike Corrigan & Dave Engebretsen, IBM Corporation + * + * Rewrite, cleanup, new allocation schemes: + * Copyright (C) 2004 Olof Johansson, IBM Corporation + * + * Dynamic DMA mapping support, platform-independent parts. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * We can use ->sysdata directly and avoid the extra work in + * pci_device_to_OF_node since ->sysdata will have been initialised + * in the iommu init code for all devices. + */ +#define PCI_GET_DN(dev) ((struct device_node *)((dev)->sysdata)) + +static inline struct iommu_table *devnode_table(struct device *dev) +{ + struct pci_dev *pdev; + + if (!dev) { + pdev = ppc64_isabridge_dev; + if (!pdev) + return NULL; + } else + pdev = to_pci_dev(dev); + + return PCI_DN(PCI_GET_DN(pdev))->iommu_table; +} + + +/* Allocates a contiguous real buffer and creates mappings over it. + * Returns the virtual address of the buffer and sets dma_handle + * to the dma address (mapping) of the first page. + */ +static void *pci_iommu_alloc_coherent(struct device *hwdev, size_t size, + dma_addr_t *dma_handle, gfp_t flag) +{ + return iommu_alloc_coherent(devnode_table(hwdev), size, dma_handle, + flag); +} + +static void pci_iommu_free_coherent(struct device *hwdev, size_t size, + void *vaddr, dma_addr_t dma_handle) +{ + iommu_free_coherent(devnode_table(hwdev), size, vaddr, dma_handle); +} + +/* Creates TCEs for a user provided buffer. The user buffer must be + * contiguous real kernel storage (not vmalloc). The address of the buffer + * passed here is the kernel (virtual) address of the buffer. The buffer + * need not be page aligned, the dma_addr_t returned will point to the same + * byte within the page as vaddr. + */ +static dma_addr_t pci_iommu_map_single(struct device *hwdev, void *vaddr, + size_t size, enum dma_data_direction direction) +{ + return iommu_map_single(devnode_table(hwdev), vaddr, size, direction); +} + + +static void pci_iommu_unmap_single(struct device *hwdev, dma_addr_t dma_handle, + size_t size, enum dma_data_direction direction) +{ + iommu_unmap_single(devnode_table(hwdev), dma_handle, size, direction); +} + + +static int pci_iommu_map_sg(struct device *pdev, struct scatterlist *sglist, + int nelems, enum dma_data_direction direction) +{ + return iommu_map_sg(pdev, devnode_table(pdev), sglist, + nelems, direction); +} + +static void pci_iommu_unmap_sg(struct device *pdev, struct scatterlist *sglist, + int nelems, enum dma_data_direction direction) +{ + iommu_unmap_sg(devnode_table(pdev), sglist, nelems, direction); +} + +/* We support DMA to/from any memory page via the iommu */ +static int pci_iommu_dma_supported(struct device *dev, u64 mask) +{ + return 1; +} + +void pci_iommu_init(void) +{ + pci_dma_ops.alloc_coherent = pci_iommu_alloc_coherent; + pci_dma_ops.free_coherent = pci_iommu_free_coherent; + pci_dma_ops.map_single = pci_iommu_map_single; + pci_dma_ops.unmap_single = pci_iommu_unmap_single; + pci_dma_ops.map_sg = pci_iommu_map_sg; + pci_dma_ops.unmap_sg = pci_iommu_unmap_sg; + pci_dma_ops.dma_supported = pci_iommu_dma_supported; +} diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile index e7ca5b1f591..06d5ef50121 100644 --- a/arch/powerpc/platforms/pseries/Makefile +++ b/arch/powerpc/platforms/pseries/Makefile @@ -4,4 +4,7 @@ obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_IBMVIO) += vio.o obj-$(CONFIG_XICS) += xics.o obj-$(CONFIG_SCANLOG) += scanlog.o -obj-$(CONFIG_EEH) += eeh.o eeh_event.o +obj-$(CONFIG_EEH) += eeh.o eeh_event.o + +obj-$(CONFIG_HVC_CONSOLE) += hvconsole.o +obj-$(CONFIG_HVCS) += hvcserver.o diff --git a/arch/powerpc/platforms/pseries/hvconsole.c b/arch/powerpc/platforms/pseries/hvconsole.c new file mode 100644 index 00000000000..138e128a388 --- /dev/null +++ b/arch/powerpc/platforms/pseries/hvconsole.c @@ -0,0 +1,74 @@ +/* + * hvconsole.c + * Copyright (C) 2004 Hollis Blanchard, IBM Corporation + * Copyright (C) 2004 IBM Corporation + * + * Additional Author(s): + * Ryan S. Arnold + * + * LPAR console support. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include + +/** + * hvc_get_chars - retrieve characters from firmware for denoted vterm adatper + * @vtermno: The vtermno or unit_address of the adapter from which to fetch the + * data. + * @buf: The character buffer into which to put the character data fetched from + * firmware. + * @count: not used? + */ +int hvc_get_chars(uint32_t vtermno, char *buf, int count) +{ + unsigned long got; + + if (plpar_hcall(H_GET_TERM_CHAR, vtermno, 0, 0, 0, &got, + (unsigned long *)buf, (unsigned long *)buf+1) == H_Success) + return got; + return 0; +} + +EXPORT_SYMBOL(hvc_get_chars); + + +/** + * hvc_put_chars: send characters to firmware for denoted vterm adapter + * @vtermno: The vtermno or unit_address of the adapter from which the data + * originated. + * @buf: The character buffer that contains the character data to send to + * firmware. + * @count: Send this number of characters. + */ +int hvc_put_chars(uint32_t vtermno, const char *buf, int count) +{ + unsigned long *lbuf = (unsigned long *) buf; + long ret; + + ret = plpar_hcall_norets(H_PUT_TERM_CHAR, vtermno, count, lbuf[0], + lbuf[1]); + if (ret == H_Success) + return count; + if (ret == H_Busy) + return 0; + return -EIO; +} + +EXPORT_SYMBOL(hvc_put_chars); diff --git a/arch/powerpc/platforms/pseries/hvcserver.c b/arch/powerpc/platforms/pseries/hvcserver.c new file mode 100644 index 00000000000..4d584172055 --- /dev/null +++ b/arch/powerpc/platforms/pseries/hvcserver.c @@ -0,0 +1,251 @@ +/* + * hvcserver.c + * Copyright (C) 2004 Ryan S Arnold, IBM Corporation + * + * PPC64 virtual I/O console server support. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include + +#include +#include +#include + +#define HVCS_ARCH_VERSION "1.0.0" + +MODULE_AUTHOR("Ryan S. Arnold "); +MODULE_DESCRIPTION("IBM hvcs ppc64 API"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(HVCS_ARCH_VERSION); + +/* + * Convert arch specific return codes into relevant errnos. The hvcs + * functions aren't performance sensitive, so this conversion isn't an + * issue. + */ +int hvcs_convert(long to_convert) +{ + switch (to_convert) { + case H_Success: + return 0; + case H_Parameter: + return -EINVAL; + case H_Hardware: + return -EIO; + case H_Busy: + case H_LongBusyOrder1msec: + case H_LongBusyOrder10msec: + case H_LongBusyOrder100msec: + case H_LongBusyOrder1sec: + case H_LongBusyOrder10sec: + case H_LongBusyOrder100sec: + return -EBUSY; + case H_Function: /* fall through */ + default: + return -EPERM; + } +} + +/** + * hvcs_free_partner_info - free pi allocated by hvcs_get_partner_info + * @head: list_head pointer for an allocated list of partner info structs to + * free. + * + * This function is used to free the partner info list that was returned by + * calling hvcs_get_partner_info(). + */ +int hvcs_free_partner_info(struct list_head *head) +{ + struct hvcs_partner_info *pi; + struct list_head *element; + + if (!head) + return -EINVAL; + + while (!list_empty(head)) { + element = head->next; + pi = list_entry(element, struct hvcs_partner_info, node); + list_del(element); + kfree(pi); + } + + return 0; +} +EXPORT_SYMBOL(hvcs_free_partner_info); + +/* Helper function for hvcs_get_partner_info */ +int hvcs_next_partner(uint32_t unit_address, + unsigned long last_p_partition_ID, + unsigned long last_p_unit_address, unsigned long *pi_buff) + +{ + long retval; + retval = plpar_hcall_norets(H_VTERM_PARTNER_INFO, unit_address, + last_p_partition_ID, + last_p_unit_address, virt_to_phys(pi_buff)); + return hvcs_convert(retval); +} + +/** + * hvcs_get_partner_info - Get all of the partner info for a vty-server adapter + * @unit_address: The unit_address of the vty-server adapter for which this + * function is fetching partner info. + * @head: An initialized list_head pointer to an empty list to use to return the + * list of partner info fetched from the hypervisor to the caller. + * @pi_buff: A page sized buffer pre-allocated prior to calling this function + * that is to be used to be used by firmware as an iterator to keep track + * of the partner info retrieval. + * + * This function returns non-zero on success, or if there is no partner info. + * + * The pi_buff is pre-allocated prior to calling this function because this + * function may be called with a spin_lock held and kmalloc of a page is not + * recommended as GFP_ATOMIC. + * + * The first long of this buffer is used to store a partner unit address. The + * second long is used to store a partner partition ID and starting at + * pi_buff[2] is the 79 character Converged Location Code (diff size than the + * unsigned longs, hence the casting mumbo jumbo you see later). + * + * Invocation of this function should always be followed by an invocation of + * hvcs_free_partner_info() using a pointer to the SAME list head instance + * that was passed as a parameter to this function. + */ +int hvcs_get_partner_info(uint32_t unit_address, struct list_head *head, + unsigned long *pi_buff) +{ + /* + * Dealt with as longs because of the hcall interface even though the + * values are uint32_t. + */ + unsigned long last_p_partition_ID; + unsigned long last_p_unit_address; + struct hvcs_partner_info *next_partner_info = NULL; + int more = 1; + int retval; + + memset(pi_buff, 0x00, PAGE_SIZE); + /* invalid parameters */ + if (!head || !pi_buff) + return -EINVAL; + + last_p_partition_ID = last_p_unit_address = ~0UL; + INIT_LIST_HEAD(head); + + do { + retval = hvcs_next_partner(unit_address, last_p_partition_ID, + last_p_unit_address, pi_buff); + if (retval) { + /* + * Don't indicate that we've failed if we have + * any list elements. + */ + if (!list_empty(head)) + return 0; + return retval; + } + + last_p_partition_ID = pi_buff[0]; + last_p_unit_address = pi_buff[1]; + + /* This indicates that there are no further partners */ + if (last_p_partition_ID == ~0UL + && last_p_unit_address == ~0UL) + break; + + /* This is a very small struct and will be freed soon in + * hvcs_free_partner_info(). */ + next_partner_info = kmalloc(sizeof(struct hvcs_partner_info), + GFP_ATOMIC); + + if (!next_partner_info) { + printk(KERN_WARNING "HVCONSOLE: kmalloc() failed to" + " allocate partner info struct.\n"); + hvcs_free_partner_info(head); + return -ENOMEM; + } + + next_partner_info->unit_address + = (unsigned int)last_p_unit_address; + next_partner_info->partition_ID + = (unsigned int)last_p_partition_ID; + + /* copy the Null-term char too */ + strncpy(&next_partner_info->location_code[0], + (char *)&pi_buff[2], + strlen((char *)&pi_buff[2]) + 1); + + list_add_tail(&(next_partner_info->node), head); + next_partner_info = NULL; + + } while (more); + + return 0; +} +EXPORT_SYMBOL(hvcs_get_partner_info); + +/** + * hvcs_register_connection - establish a connection between this vty-server and + * a vty. + * @unit_address: The unit address of the vty-server adapter that is to be + * establish a connection. + * @p_partition_ID: The partition ID of the vty adapter that is to be connected. + * @p_unit_address: The unit address of the vty adapter to which the vty-server + * is to be connected. + * + * If this function is called once and -EINVAL is returned it may + * indicate that the partner info needs to be refreshed for the + * target unit address at which point the caller must invoke + * hvcs_get_partner_info() and then call this function again. If, + * for a second time, -EINVAL is returned then it indicates that + * there is probably already a partner connection registered to a + * different vty-server adapter. It is also possible that a second + * -EINVAL may indicate that one of the parms is not valid, for + * instance if the link was removed between the vty-server adapter + * and the vty adapter that you are trying to open. Don't shoot the + * messenger. Firmware implemented it this way. + */ +int hvcs_register_connection( uint32_t unit_address, + uint32_t p_partition_ID, uint32_t p_unit_address) +{ + long retval; + retval = plpar_hcall_norets(H_REGISTER_VTERM, unit_address, + p_partition_ID, p_unit_address); + return hvcs_convert(retval); +} +EXPORT_SYMBOL(hvcs_register_connection); + +/** + * hvcs_free_connection - free the connection between a vty-server and vty + * @unit_address: The unit address of the vty-server that is to have its + * connection severed. + * + * This function is used to free the partner connection between a vty-server + * adapter and a vty adapter. + * + * If -EBUSY is returned continue to call this function until 0 is returned. + */ +int hvcs_free_connection(uint32_t unit_address) +{ + long retval; + retval = plpar_hcall_norets(H_FREE_VTERM, unit_address); + return hvcs_convert(retval); +} +EXPORT_SYMBOL(hvcs_free_connection); -- cgit v1.2.3 From 1dfc6772097ef4eadd39a10ce44557c782d5058e Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Mon, 14 Nov 2005 17:30:40 +1100 Subject: powerpc: Export a couple of prom functions These are needed by the TPM driver, apparently. Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/prom.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index 6a5b468edb4..3bf968e7409 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -1368,6 +1368,7 @@ prom_n_addr_cells(struct device_node* np) /* No #address-cells property for the root node, default to 1 */ return 1; } +EXPORT_SYMBOL(prom_n_addr_cells); int prom_n_size_cells(struct device_node* np) @@ -1383,6 +1384,7 @@ prom_n_size_cells(struct device_node* np) /* No #size-cells property for the root node, default to 1 */ return 1; } +EXPORT_SYMBOL(prom_n_size_cells); /** * Work out the sense (active-low level / active-high edge) -- cgit v1.2.3 From 5be396b00ca0f2f769c55cf69bbd7c77451c925e Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Mon, 14 Nov 2005 17:31:55 +1100 Subject: powerpc: Mark PREP and embedded as broken for now These machines don't have working ARCH=powerpc support yet, so make them depend on BROKEN so people don't enable them inadvertently and get compile errors. Signed-off-by: Paul Mackerras --- arch/powerpc/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index c5c3f4213cd..94df74bcc0e 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -261,7 +261,7 @@ config PPC_ISERIES config EMBEDDED6xx bool "Embedded 6xx/7xx/7xxx-based board" - depends on PPC32 + depends on PPC32 && BROKEN config APUS bool "Amiga-APUS" @@ -305,7 +305,7 @@ config PPC_PMAC64 config PPC_PREP bool " PowerPC Reference Platform (PReP) based machines" - depends on PPC_MULTIPLATFORM && PPC32 + depends on PPC_MULTIPLATFORM && PPC32 && BROKEN select PPC_I8259 select PPC_INDIRECT_PCI default y -- cgit v1.2.3 From cc657f53928997c65bf2409c45166c6ceee8d306 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Mon, 14 Nov 2005 21:55:15 +1100 Subject: powerpc: Fix clearing of the FPSCR when invoking a signal handler As pointed out by Gary Byers, we were clearing the image of the FPSCR (floating point status and control register) in the thread_struct before copying it to the user stack when invoking a signal. Thus the task would see its FPSCR getting cleared when it took a signal. While fixing it I noticed that our swapcontext system call was also clearing FPSCR. It shouldn't, so I fixed that too. Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/signal_32.c | 7 +++++-- arch/powerpc/kernel/signal_64.c | 6 +++--- 2 files changed, 8 insertions(+), 5 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c index 8bdf95b7e42..5a2eba60dd3 100644 --- a/arch/powerpc/kernel/signal_32.c +++ b/arch/powerpc/kernel/signal_32.c @@ -403,8 +403,6 @@ static int save_user_regs(struct pt_regs *regs, struct mcontext __user *frame, ELF_NFPREG * sizeof(double))) return 1; - current->thread.fpscr.val = 0; /* turn off all fp exceptions */ - #ifdef CONFIG_ALTIVEC /* save altivec registers */ if (current->thread.used_vr) { @@ -818,6 +816,9 @@ static int handle_rt_signal(unsigned long sig, struct k_sigaction *ka, goto badframe; regs->link = (unsigned long) frame->tramp; } + + current->thread.fpscr.val = 0; /* turn off all fp exceptions */ + if (put_user(regs->gpr[1], (u32 __user *)newsp)) goto badframe; regs->gpr[1] = newsp; @@ -1097,6 +1098,8 @@ static int handle_signal(unsigned long sig, struct k_sigaction *ka, regs->link = (unsigned long) frame->mctx.tramp; } + current->thread.fpscr.val = 0; /* turn off all fp exceptions */ + if (put_user(regs->gpr[1], (u32 __user *)newsp)) goto badframe; regs->gpr[1] = newsp; diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c index 58194e15071..1decf278553 100644 --- a/arch/powerpc/kernel/signal_64.c +++ b/arch/powerpc/kernel/signal_64.c @@ -131,9 +131,6 @@ static long setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs, flush_fp_to_thread(current); - /* Make sure signal doesn't get spurrious FP exceptions */ - current->thread.fpscr.val = 0; - #ifdef CONFIG_ALTIVEC err |= __put_user(v_regs, &sc->v_regs); @@ -423,6 +420,9 @@ static int setup_rt_frame(int signr, struct k_sigaction *ka, siginfo_t *info, if (err) goto badframe; + /* Make sure signal handler doesn't get spurious FP exceptions */ + current->thread.fpscr.val = 0; + /* Set up to return from userspace. */ if (vdso64_rt_sigtramp && current->thread.vdso_base) { regs->link = current->thread.vdso_base + vdso64_rt_sigtramp; -- cgit v1.2.3 From ba76cd575ffd461d83507c23cf53c78d56d1ea0a Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Mon, 14 Nov 2005 21:56:57 +1100 Subject: powerpc: Remove __init from a function used in suspend/resume. Suspend/resume on powermacs uses the pmac_get_boot_time function, so it can't be marked as __init. Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/powermac/time.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/powermac/time.c b/arch/powerpc/platforms/powermac/time.c index b1714f9bd92..feb0a94e781 100644 --- a/arch/powerpc/platforms/powermac/time.c +++ b/arch/powerpc/platforms/powermac/time.c @@ -199,7 +199,8 @@ static unsigned long smu_get_time(void) #define smu_set_rtc_time(tm, spin) 0 #endif -unsigned long __init pmac_get_boot_time(void) +/* Can't be __init, it's called when suspending and resuming */ +unsigned long pmac_get_boot_time(void) { /* Get the time from the RTC, used only at boot time */ switch (sys_ctrler) { -- cgit v1.2.3 From fa63b229829e73361900183bc1ae21b71b6c2dae Mon Sep 17 00:00:00 2001 From: Ben Collins Date: Tue, 15 Nov 2005 00:09:09 -0800 Subject: [PATCH] Add missing EXPORT_SYMBOLS() for __ide_mm_* functions on powerpc These exported symbols are in arch/ppc/ but missing from arch/powerpc/ for ppc32 builds. Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/powerpc/kernel/ppc_ksyms.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c index 5dcf4ba05ee..59846b40d52 100644 --- a/arch/powerpc/kernel/ppc_ksyms.c +++ b/arch/powerpc/kernel/ppc_ksyms.c @@ -105,6 +105,13 @@ EXPORT_SYMBOL(__clear_user); EXPORT_SYMBOL(__strncpy_from_user); EXPORT_SYMBOL(__strnlen_user); +#ifndef __powerpc64__ +EXPORT_SYMBOL(__ide_mm_insl); +EXPORT_SYMBOL(__ide_mm_outsw); +EXPORT_SYMBOL(__ide_mm_insw); +EXPORT_SYMBOL(__ide_mm_outsl); +#endif + EXPORT_SYMBOL(_insb); EXPORT_SYMBOL(_outsb); EXPORT_SYMBOL(_insw); -- cgit v1.2.3 From fb6d73d3014babb69f5cc2d1d78b31e9d09fc5df Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Wed, 16 Nov 2005 11:43:26 +1100 Subject: [PATCH] powerpc: Fix sparsemem with memory holes [was Re: ppc64 oops..] This patch should fix the crashes we have been seeing on 64-bit powerpc systems with a memory hole when sparsemem is enabled. I'd appreciate it if people who know more about NUMA and sparsemem than me could look over it. There were two bugs. The first was that if NUMA was enabled but there was no NUMA information for the machine, the setup_nonnuma() function was adding a single region, assuming memory was contiguous. The second was that the loops in mem_init() and show_mem() assumed that all pages within the span of a pgdat were valid (had a valid struct page). I also fixed the incorrect setting of num_physpages that Mike Kravetz pointed out. Signed-off-by: Paul Mackerras Signed-off-by: Linus Torvalds --- arch/powerpc/mm/mem.c | 8 ++++++-- arch/powerpc/mm/numa.c | 5 ++++- 2 files changed, 10 insertions(+), 3 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index e2c95fcb805..4bd7b0a7099 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -200,6 +200,8 @@ void show_mem(void) unsigned long flags; pgdat_resize_lock(pgdat, &flags); for (i = 0; i < pgdat->node_spanned_pages; i++) { + if (!pfn_valid(pgdat->node_start_pfn + i)) + continue; page = pgdat_page_nr(pgdat, i); total++; if (PageHighMem(page)) @@ -336,7 +338,7 @@ void __init mem_init(void) struct page *page; unsigned long reservedpages = 0, codesize, initsize, datasize, bsssize; - num_physpages = max_pfn; /* RAM is assumed contiguous */ + num_physpages = lmb.memory.size >> PAGE_SHIFT; high_memory = (void *) __va(max_low_pfn * PAGE_SIZE); #ifdef CONFIG_NEED_MULTIPLE_NODES @@ -348,11 +350,13 @@ void __init mem_init(void) } } #else - max_mapnr = num_physpages; + max_mapnr = max_pfn; totalram_pages += free_all_bootmem(); #endif for_each_pgdat(pgdat) { for (i = 0; i < pgdat->node_spanned_pages; i++) { + if (!pfn_valid(pgdat->node_start_pfn + i)) + continue; page = pgdat_page_nr(pgdat, i); if (PageReserved(page)) reservedpages++; diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index bd2cf133688..f72cf87364c 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -483,6 +483,7 @@ static void __init setup_nonnuma(void) { unsigned long top_of_ram = lmb_end_of_DRAM(); unsigned long total_ram = lmb_phys_mem_size(); + unsigned int i; printk(KERN_INFO "Top of RAM: 0x%lx, Total RAM: 0x%lx\n", top_of_ram, total_ram); @@ -490,7 +491,9 @@ static void __init setup_nonnuma(void) (top_of_ram - total_ram) >> 20); map_cpu_to_node(boot_cpuid, 0); - add_region(0, 0, lmb_end_of_DRAM() >> PAGE_SHIFT); + for (i = 0; i < lmb.memory.cnt; ++i) + add_region(0, lmb.memory.region[i].base >> PAGE_SHIFT, + lmb_size_pages(&lmb.memory, i)); node_set_online(0); } -- cgit v1.2.3 From 5444a5e9e872f599ec12534bd1bf9bc79a1c72ca Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 15 Nov 2005 14:40:25 +1100 Subject: [PATCH] powerpc: update defconfigs My patch moving ppc64 RTC to genrtc was supposed to update all defconfigs, but for some reason, the patch actually posted only had the pseries one... ouch. This patch properly updates all defconfigs. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/configs/cell_defconfig | 175 ++++++++++++++++++++++----------- arch/powerpc/configs/g5_defconfig | 53 ++++++---- arch/powerpc/configs/iseries_defconfig | 159 ++++++++++++++++++++---------- arch/powerpc/configs/maple_defconfig | 155 +++++++++++++++++++---------- arch/powerpc/configs/pseries_defconfig | 4 +- 5 files changed, 361 insertions(+), 185 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/configs/cell_defconfig b/arch/powerpc/configs/cell_defconfig index 67ffecbc05c..4b433411b9e 100644 --- a/arch/powerpc/configs/cell_defconfig +++ b/arch/powerpc/configs/cell_defconfig @@ -1,18 +1,33 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc4 -# Thu Oct 20 08:29:10 2005 +# Linux kernel version: 2.6.15-rc1 +# Tue Nov 15 14:36:20 2005 # +CONFIG_PPC64=y CONFIG_64BIT=y +CONFIG_PPC_MERGE=y CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_ISA_DMA=y +CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_COMPAT=y +CONFIG_SYSVIPC_COMPAT=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_FORCE_MAX_ZONEORDER=13 + +# +# Processor support +# +# CONFIG_POWER4_ONLY is not set +CONFIG_POWER3=y +CONFIG_POWER4=y +CONFIG_PPC_FPU=y +CONFIG_ALTIVEC=y +CONFIG_PPC_STD_MMU=y +CONFIG_SMP=y +CONFIG_NR_CPUS=4 # # Code maturity level options @@ -66,31 +81,69 @@ CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODULE_SRCVERSION_ALL is not set # CONFIG_KMOD is not set CONFIG_STOP_MACHINE=y -CONFIG_SYSVIPC_COMPAT=y + +# +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" # # Platform support # -# CONFIG_PPC_ISERIES is not set CONFIG_PPC_MULTIPLATFORM=y +# CONFIG_PPC_ISERIES is not set +# CONFIG_EMBEDDED6xx is not set +# CONFIG_APUS is not set # CONFIG_PPC_PSERIES is not set -CONFIG_PPC_BPA=y # CONFIG_PPC_PMAC is not set # CONFIG_PPC_MAPLE is not set -CONFIG_PPC=y -CONFIG_PPC64=y +CONFIG_PPC_CELL=y CONFIG_PPC_OF=y -CONFIG_BPA_IIC=y -CONFIG_ALTIVEC=y -CONFIG_KEXEC=y # CONFIG_U3_DART is not set -# CONFIG_BOOTX_TEXT is not set -# CONFIG_POWER4_ONLY is not set +CONFIG_PPC_RTAS=y +# CONFIG_RTAS_ERROR_LOGGING is not set +CONFIG_RTAS_PROC=y +CONFIG_RTAS_FLASH=y +CONFIG_MMIO_NVRAM=y +CONFIG_CELL_IIC=y +# CONFIG_PPC_MPC106 is not set +# CONFIG_GENERIC_TBSYNC is not set +# CONFIG_CPU_FREQ is not set +# CONFIG_WANT_EARLY_SERIAL is not set + +# +# Kernel options +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_PREEMPT_BKL=y +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_FORCE_MAX_ZONEORDER=13 # CONFIG_IOMMU_VMERGE is not set -CONFIG_SMP=y -CONFIG_NR_CPUS=4 +CONFIG_KEXEC=y +CONFIG_IRQ_ALL_CPUS=y +# CONFIG_NUMA is not set CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -98,30 +151,21 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_NUMA is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PPC_64K_PAGES is not set CONFIG_SCHED_SMT=y -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -CONFIG_PREEMPT_BKL=y -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_GENERIC_HARDIRQS=y -CONFIG_PPC_RTAS=y -CONFIG_RTAS_PROC=y -CONFIG_RTAS_FLASH=y -CONFIG_SECCOMP=y -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y # -# Bus Options +# Bus options # +CONFIG_GENERIC_ISA_DMA=y +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_INDIRECT_PCI is not set CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_LEGACY_PROC=y @@ -136,6 +180,7 @@ CONFIG_PCI_LEGACY_PROC=y # PCI Hotplug Support # # CONFIG_HOTPLUG_PCI is not set +CONFIG_KERNEL_START=0xc000000000000000 # # Networking @@ -183,6 +228,10 @@ CONFIG_INET6_TUNNEL=m CONFIG_IPV6_TUNNEL=m CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# # CONFIG_NETFILTER_NETLINK is not set # @@ -284,6 +333,10 @@ CONFIG_IP_NF_ARP_MANGLE=m # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y @@ -345,14 +398,6 @@ CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=131072 CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # @@ -442,6 +487,7 @@ CONFIG_IDEDMA_AUTO=y # # Macintosh device drivers # +# CONFIG_WINDFARM is not set # # Network device support @@ -495,7 +541,6 @@ CONFIG_SKGE=m # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set -# CONFIG_SPIDER_NET is not set # CONFIG_MV643XX_ETH is not set # @@ -625,7 +670,7 @@ CONFIG_WATCHDOG=y # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set -CONFIG_WATCHDOG_RTAS=y +# CONFIG_WATCHDOG_RTAS is not set # # PCI-based Watchdog Cards @@ -633,6 +678,8 @@ CONFIG_WATCHDOG_RTAS=y # CONFIG_PCIPCWATCHDOG is not set # CONFIG_WDTPCI is not set # CONFIG_RTC is not set +CONFIG_GEN_RTC=y +# CONFIG_GEN_RTC_X is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -649,6 +696,7 @@ CONFIG_WATCHDOG_RTAS=y # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -699,6 +747,7 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set # CONFIG_SENSORS_MAX6875 is not set +# CONFIG_RTC_X1205_I2C is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -756,6 +805,10 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + # # USB Gadget Support # @@ -943,9 +996,24 @@ CONFIG_NLS_ISO8859_15=m # CONFIG_NLS_UTF8 is not set # -# Profiling support +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=m +CONFIG_ZLIB_DEFLATE=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m + +# +# Instrumentation Support # # CONFIG_PROFILING is not set +# CONFIG_KPROBES is not set # # Kernel hacking @@ -962,13 +1030,14 @@ CONFIG_DEBUG_SPINLOCK_SLEEP=y # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set CONFIG_DEBUG_FS=y +# CONFIG_DEBUG_VM is not set +# CONFIG_RCU_TORTURE_TEST is not set # CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_KPROBES is not set # CONFIG_DEBUG_STACK_USAGE is not set CONFIG_DEBUGGER=y # CONFIG_XMON is not set -# CONFIG_PPCDBG is not set CONFIG_IRQSTACKS=y +# CONFIG_BOOTX_TEXT is not set # # Security options @@ -1008,17 +1077,3 @@ CONFIG_CRYPTO_DEFLATE=m # # Hardware crypto devices # - -# -# Library routines -# -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=m -CONFIG_ZLIB_DEFLATE=m -CONFIG_TEXTSEARCH=y -CONFIG_TEXTSEARCH_KMP=m -CONFIG_TEXTSEARCH_BM=m -CONFIG_TEXTSEARCH_FSM=m diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig index e76854f8c12..e7c23e3902b 100644 --- a/arch/powerpc/configs/g5_defconfig +++ b/arch/powerpc/configs/g5_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14 -# Mon Nov 7 13:37:59 2005 +# Linux kernel version: 2.6.15-rc1 +# Tue Nov 15 14:39:20 2005 # CONFIG_PPC64=y CONFIG_64BIT=y @@ -82,6 +82,23 @@ CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y CONFIG_STOP_MACHINE=y +# +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + # # Platform support # @@ -137,6 +154,7 @@ CONFIG_IRQ_ALL_CPUS=y # CONFIG_NUMA is not set CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -144,7 +162,7 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_SPLIT_PTLOCK_CPUS=4096 # CONFIG_PPC_64K_PAGES is not set # CONFIG_SCHED_SMT is not set CONFIG_PROC_DEVICETREE=y @@ -215,6 +233,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# # CONFIG_NETFILTER_NETLINK is not set # @@ -382,19 +404,6 @@ CONFIG_BLK_DEV_INITRD=y CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_ATA_OVER_ETH is not set # @@ -656,7 +665,6 @@ CONFIG_SUNGEM=y # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_NET_PCI is not set -# CONFIG_FEC_8XX is not set # # Ethernet (1000 Mbit) @@ -710,6 +718,7 @@ CONFIG_PPP_ASYNC=m CONFIG_PPP_SYNC_TTY=m CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +# CONFIG_PPP_MPPE is not set CONFIG_PPPOE=m # CONFIG_SLIP is not set # CONFIG_NET_FC is not set @@ -804,6 +813,8 @@ CONFIG_LEGACY_PTY_COUNT=256 # # CONFIG_WATCHDOG is not set # CONFIG_RTC is not set +CONFIG_GEN_RTC=y +# CONFIG_GEN_RTC_X is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -917,7 +928,6 @@ CONFIG_FB=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y -CONFIG_FB_SOFT_CURSOR=y CONFIG_FB_MACMODES=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y @@ -932,6 +942,7 @@ CONFIG_FB_OF=y # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set # CONFIG_FB_VGA16 is not set +# CONFIG_FB_S1D13XXX is not set CONFIG_FB_NVIDIA=y CONFIG_FB_NVIDIA_I2C=y # CONFIG_FB_RIVA is not set @@ -950,7 +961,6 @@ CONFIG_FB_RADEON_I2C=y # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_CYBLA is not set # CONFIG_FB_TRIDENT is not set -# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # @@ -959,6 +969,7 @@ CONFIG_FB_RADEON_I2C=y # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y @@ -1474,10 +1485,11 @@ CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m # -# Profiling support +# Instrumentation Support # CONFIG_PROFILING=y CONFIG_OPROFILE=y +# CONFIG_KPROBES is not set # # Kernel hacking @@ -1497,7 +1509,6 @@ CONFIG_DEBUG_FS=y # CONFIG_DEBUG_VM is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_KPROBES is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUGGER is not set CONFIG_IRQSTACKS=y diff --git a/arch/powerpc/configs/iseries_defconfig b/arch/powerpc/configs/iseries_defconfig index 62e92c7e9e2..5d0866707a7 100644 --- a/arch/powerpc/configs/iseries_defconfig +++ b/arch/powerpc/configs/iseries_defconfig @@ -1,18 +1,33 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc4 -# Thu Oct 20 08:30:56 2005 +# Linux kernel version: 2.6.15-rc1 +# Tue Nov 15 14:38:09 2005 # +CONFIG_PPC64=y CONFIG_64BIT=y +CONFIG_PPC_MERGE=y CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_ISA_DMA=y +CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_COMPAT=y +CONFIG_SYSVIPC_COMPAT=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_FORCE_MAX_ZONEORDER=13 + +# +# Processor support +# +# CONFIG_POWER4_ONLY is not set +CONFIG_POWER3=y +CONFIG_POWER4=y +CONFIG_PPC_FPU=y +# CONFIG_ALTIVEC is not set +CONFIG_PPC_STD_MMU=y +CONFIG_SMP=y +CONFIG_NR_CPUS=32 # # Code maturity level options @@ -68,22 +83,60 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y CONFIG_STOP_MACHINE=y -CONFIG_SYSVIPC_COMPAT=y + +# +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" # # Platform support # -CONFIG_PPC_ISERIES=y # CONFIG_PPC_MULTIPLATFORM is not set -CONFIG_PPC=y -CONFIG_PPC64=y +CONFIG_PPC_ISERIES=y +# CONFIG_EMBEDDED6xx is not set +# CONFIG_APUS is not set +# CONFIG_PPC_RTAS is not set +# CONFIG_MMIO_NVRAM is not set CONFIG_IBMVIO=y -# CONFIG_POWER4_ONLY is not set +# CONFIG_PPC_MPC106 is not set +# CONFIG_GENERIC_TBSYNC is not set +# CONFIG_CPU_FREQ is not set +# CONFIG_WANT_EARLY_SERIAL is not set + +# +# Kernel options +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +# CONFIG_PREEMPT_BKL is not set +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_IOMMU_VMERGE=y -CONFIG_SMP=y -CONFIG_NR_CPUS=32 +CONFIG_IRQ_ALL_CPUS=y +CONFIG_LPARCFG=y +# CONFIG_NUMA is not set CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -91,26 +144,20 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_NUMA is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PPC_64K_PAGES is not set # CONFIG_SCHED_SMT is not set -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -# CONFIG_PREEMPT_BKL is not set -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_GENERIC_HARDIRQS=y -CONFIG_LPARCFG=y +CONFIG_PROC_DEVICETREE=y +# CONFIG_PM is not set CONFIG_SECCOMP=y -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set CONFIG_ISA_DMA_API=y # -# Bus Options +# Bus options # +CONFIG_GENERIC_ISA_DMA=y +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_INDIRECT_PCI is not set CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_LEGACY_PROC=y @@ -125,6 +172,7 @@ CONFIG_PCI_LEGACY_PROC=y # PCI Hotplug Support # # CONFIG_HOTPLUG_PCI is not set +CONFIG_KERNEL_START=0xc000000000000000 # # Networking @@ -166,6 +214,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# # CONFIG_NETFILTER_NETLINK is not set # @@ -265,6 +317,10 @@ CONFIG_LLC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set CONFIG_NET_CLS_ROUTE=y @@ -326,14 +382,6 @@ CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=65536 CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # @@ -377,6 +425,7 @@ CONFIG_SCSI_FC_ATTRS=y # # SCSI low-level drivers # +# CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -454,6 +503,7 @@ CONFIG_DM_ZERO=m # # Macintosh device drivers # +# CONFIG_WINDFARM is not set # # Network device support @@ -561,6 +611,7 @@ CONFIG_PPP_ASYNC=m CONFIG_PPP_SYNC_TTY=m CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m +# CONFIG_PPP_MPPE is not set CONFIG_PPPOE=m # CONFIG_SLIP is not set # CONFIG_NET_FC is not set @@ -643,6 +694,8 @@ CONFIG_LEGACY_PTY_COUNT=256 # # CONFIG_WATCHDOG is not set # CONFIG_RTC is not set +CONFIG_GEN_RTC=y +# CONFIG_GEN_RTC_X is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -660,6 +713,7 @@ CONFIG_MAX_RAW_DEVS=256 # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -712,6 +766,10 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB is not set +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + # # USB Gadget Support # @@ -917,10 +975,25 @@ CONFIG_VIOTAPE=m CONFIG_VIOPATH=y # -# Profiling support +# Library routines +# +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m + +# +# Instrumentation Support # CONFIG_PROFILING=y CONFIG_OPROFILE=y +# CONFIG_KPROBES is not set # # Kernel hacking @@ -937,11 +1010,11 @@ CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set CONFIG_DEBUG_FS=y +# CONFIG_DEBUG_VM is not set +# CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUG_STACKOVERFLOW=y -# CONFIG_KPROBES is not set CONFIG_DEBUG_STACK_USAGE=y # CONFIG_DEBUGGER is not set -# CONFIG_PPCDBG is not set CONFIG_IRQSTACKS=y # @@ -982,17 +1055,3 @@ CONFIG_CRYPTO_TEST=m # # Hardware crypto devices # - -# -# Library routines -# -CONFIG_CRC_CCITT=m -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=m -CONFIG_TEXTSEARCH=y -CONFIG_TEXTSEARCH_KMP=m -CONFIG_TEXTSEARCH_BM=m -CONFIG_TEXTSEARCH_FSM=m diff --git a/arch/powerpc/configs/maple_defconfig b/arch/powerpc/configs/maple_defconfig index 7b480f3d140..92e42613ef0 100644 --- a/arch/powerpc/configs/maple_defconfig +++ b/arch/powerpc/configs/maple_defconfig @@ -1,18 +1,32 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.14-rc4 -# Thu Oct 20 08:31:24 2005 +# Linux kernel version: 2.6.15-rc1 +# Tue Nov 15 14:38:58 2005 # +CONFIG_PPC64=y CONFIG_64BIT=y +CONFIG_PPC_MERGE=y CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_ISA_DMA=y +CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_COMPAT=y +CONFIG_SYSVIPC_COMPAT=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_FORCE_MAX_ZONEORDER=13 + +# +# Processor support +# +CONFIG_POWER4_ONLY=y +CONFIG_POWER4=y +CONFIG_PPC_FPU=y +# CONFIG_ALTIVEC is not set +CONFIG_PPC_STD_MMU=y +CONFIG_SMP=y +CONFIG_NR_CPUS=2 # # Code maturity level options @@ -67,32 +81,67 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y CONFIG_STOP_MACHINE=y -CONFIG_SYSVIPC_COMPAT=y + +# +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" # # Platform support # -# CONFIG_PPC_ISERIES is not set CONFIG_PPC_MULTIPLATFORM=y +# CONFIG_PPC_ISERIES is not set +# CONFIG_EMBEDDED6xx is not set +# CONFIG_APUS is not set # CONFIG_PPC_PSERIES is not set -# CONFIG_PPC_BPA is not set # CONFIG_PPC_PMAC is not set CONFIG_PPC_MAPLE=y -CONFIG_PPC=y -CONFIG_PPC64=y +# CONFIG_PPC_CELL is not set CONFIG_PPC_OF=y -CONFIG_MPIC=y -# CONFIG_ALTIVEC is not set -CONFIG_KEXEC=y CONFIG_U3_DART=y +CONFIG_MPIC=y +# CONFIG_PPC_RTAS is not set +# CONFIG_MMIO_NVRAM is not set CONFIG_MPIC_BROKEN_U3=y -CONFIG_BOOTX_TEXT=y -CONFIG_POWER4_ONLY=y +# CONFIG_PPC_MPC106 is not set +CONFIG_GENERIC_TBSYNC=y +# CONFIG_CPU_FREQ is not set +# CONFIG_WANT_EARLY_SERIAL is not set + +# +# Kernel options +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +# CONFIG_PREEMPT_BKL is not set +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_IOMMU_VMERGE=y -CONFIG_SMP=y -CONFIG_NR_CPUS=2 +CONFIG_KEXEC=y +CONFIG_IRQ_ALL_CPUS=y +# CONFIG_NUMA is not set CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -100,27 +149,21 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_NUMA is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PPC_64K_PAGES is not set # CONFIG_SCHED_SMT is not set -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -# CONFIG_PREEMPT_BKL is not set -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_GENERIC_HARDIRQS=y -CONFIG_SECCOMP=y -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y # -# Bus Options +# Bus options # +CONFIG_GENERIC_ISA_DMA=y +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_INDIRECT_PCI is not set CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCI_LEGACY_PROC=y @@ -135,6 +178,7 @@ CONFIG_PCI_LEGACY_PROC=y # PCI Hotplug Support # # CONFIG_HOTPLUG_PCI is not set +CONFIG_KERNEL_START=0xc000000000000000 # # Networking @@ -193,6 +237,10 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# # CONFIG_NET_SCHED is not set # CONFIG_NET_CLS_ROUTE is not set @@ -254,14 +302,6 @@ CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # @@ -351,6 +391,7 @@ CONFIG_IDEDMA_AUTO=y # # Macintosh device drivers # +# CONFIG_WINDFARM is not set # # Network device support @@ -533,6 +574,8 @@ CONFIG_LEGACY_PTY_COUNT=256 # # CONFIG_WATCHDOG is not set # CONFIG_RTC is not set +CONFIG_GEN_RTC=y +# CONFIG_GEN_RTC_X is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -549,6 +592,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # TPM devices # # CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set # # I2C support @@ -599,6 +643,7 @@ CONFIG_I2C_AMD8111=y # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set # CONFIG_SENSORS_MAX6875 is not set +# CONFIG_RTC_X1205_I2C is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -681,12 +726,15 @@ CONFIG_USB_UHCI_HCD=y # # USB Device Class drivers # -# CONFIG_USB_BLUETOOTH_TTY is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information # # CONFIG_USB_STORAGE is not set @@ -776,6 +824,7 @@ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y # CONFIG_USB_SERIAL_KLSI is not set # CONFIG_USB_SERIAL_KOBIL_SCT is not set # CONFIG_USB_SERIAL_MCT_U232 is not set +# CONFIG_USB_SERIAL_NOKIA_DKU2 is not set # CONFIG_USB_SERIAL_PL2303 is not set # CONFIG_USB_SERIAL_HP4X is not set # CONFIG_USB_SERIAL_SAFE is not set @@ -985,9 +1034,19 @@ CONFIG_NLS_DEFAULT="utf-8" CONFIG_NLS_UTF8=y # -# Profiling support +# Library routines +# +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y + +# +# Instrumentation Support # # CONFIG_PROFILING is not set +# CONFIG_KPROBES is not set # # Kernel hacking @@ -1004,14 +1063,15 @@ CONFIG_DEBUG_SPINLOCK_SLEEP=y # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set CONFIG_DEBUG_FS=y +# CONFIG_DEBUG_VM is not set +# CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUG_STACKOVERFLOW=y -# CONFIG_KPROBES is not set CONFIG_DEBUG_STACK_USAGE=y CONFIG_DEBUGGER=y CONFIG_XMON=y CONFIG_XMON_DEFAULT=y -# CONFIG_PPCDBG is not set # CONFIG_IRQSTACKS is not set +CONFIG_BOOTX_TEXT=y # # Security options @@ -1051,12 +1111,3 @@ CONFIG_CRYPTO_DES=y # # Hardware crypto devices # - -# -# Library routines -# -CONFIG_CRC_CCITT=y -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig index 913962c1dae..b4745c918a4 100644 --- a/arch/powerpc/configs/pseries_defconfig +++ b/arch/powerpc/configs/pseries_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.15-rc1 -# Mon Nov 14 15:27:00 2005 +# Tue Nov 15 14:36:55 2005 # CONFIG_PPC64=y CONFIG_64BIT=y @@ -144,7 +144,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_IOMMU_VMERGE=y CONFIG_HOTPLUG_CPU=y CONFIG_KEXEC=y -# CONFIG_IRQ_ALL_CPUS is not set +CONFIG_IRQ_ALL_CPUS=y CONFIG_PPC_SPLPAR=y CONFIG_EEH=y CONFIG_SCANLOG=m -- cgit v1.2.3 From eb481899aa319cf5cbeccfd9deac907300698b57 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Tue, 15 Nov 2005 14:49:22 +1100 Subject: [PATCH] powerpc: Fixup debugging in lmb.c Somewhere we lost the include of udbg.h in lmb.c. While we're there, add a DBG macro like every other file has and use it in lmb_dump_all(). Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras --- arch/powerpc/mm/lmb.c | 33 ++++++++++++++++++--------------- 1 file changed, 18 insertions(+), 15 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/mm/lmb.c b/arch/powerpc/mm/lmb.c index 9b5aa6808eb..9584608fd76 100644 --- a/arch/powerpc/mm/lmb.c +++ b/arch/powerpc/mm/lmb.c @@ -22,35 +22,38 @@ #include "mmu_decl.h" /* for __max_low_memory */ #endif -struct lmb lmb; - #undef DEBUG +#ifdef DEBUG +#include +#define DBG(fmt...) udbg_printf(fmt) +#else +#define DBG(fmt...) +#endif + +struct lmb lmb; + void lmb_dump_all(void) { #ifdef DEBUG unsigned long i; - udbg_printf("lmb_dump_all:\n"); - udbg_printf(" memory.cnt = 0x%lx\n", - lmb.memory.cnt); - udbg_printf(" memory.size = 0x%lx\n", - lmb.memory.size); + DBG("lmb_dump_all:\n"); + DBG(" memory.cnt = 0x%lx\n", lmb.memory.cnt); + DBG(" memory.size = 0x%lx\n", lmb.memory.size); for (i=0; i < lmb.memory.cnt ;i++) { - udbg_printf(" memory.region[0x%x].base = 0x%lx\n", + DBG(" memory.region[0x%x].base = 0x%lx\n", i, lmb.memory.region[i].base); - udbg_printf(" .size = 0x%lx\n", + DBG(" .size = 0x%lx\n", lmb.memory.region[i].size); } - udbg_printf("\n reserved.cnt = 0x%lx\n", - lmb.reserved.cnt); - udbg_printf(" reserved.size = 0x%lx\n", - lmb.reserved.size); + DBG("\n reserved.cnt = 0x%lx\n", lmb.reserved.cnt); + DBG(" reserved.size = 0x%lx\n", lmb.reserved.size); for (i=0; i < lmb.reserved.cnt ;i++) { - udbg_printf(" reserved.region[0x%x].base = 0x%lx\n", + DBG(" reserved.region[0x%x].base = 0x%lx\n", i, lmb.reserved.region[i].base); - udbg_printf(" .size = 0x%lx\n", + DBG(" .size = 0x%lx\n", lmb.reserved.region[i].size); } #endif /* DEBUG */ -- cgit v1.2.3 From f9e4ec57c66586d0c165ed9373efaf9e329d5766 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Tue, 15 Nov 2005 15:16:38 +1100 Subject: [PATCH] powerpc: More debugging fixups Add a few more missing includes of udbg.h Signed-off-by: Michael Ellerman Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/pci_64.c | 2 +- arch/powerpc/kernel/setup-common.c | 1 + arch/powerpc/kernel/smp.c | 7 ++++--- arch/powerpc/platforms/pseries/smp.c | 1 + 4 files changed, 7 insertions(+), 4 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c index 3cef1b8f57f..d7de3ec0bf8 100644 --- a/arch/powerpc/kernel/pci_64.c +++ b/arch/powerpc/kernel/pci_64.c @@ -30,10 +30,10 @@ #include #include #include -#include #include #ifdef DEBUG +#include #define DBG(fmt...) udbg_printf(fmt) #else #define DBG(fmt...) diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c index 33e7f2c7f19..bd3eb4292b5 100644 --- a/arch/powerpc/kernel/setup-common.c +++ b/arch/powerpc/kernel/setup-common.c @@ -59,6 +59,7 @@ #undef DEBUG #ifdef DEBUG +#include #define DBG(fmt...) udbg_printf(fmt) #else #define DBG(fmt...) diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c index 62dfc5b8d76..30374d2f88e 100644 --- a/arch/powerpc/kernel/smp.c +++ b/arch/powerpc/kernel/smp.c @@ -49,15 +49,16 @@ #include #endif -int smp_hw_index[NR_CPUS]; -struct thread_info *secondary_ti; - #ifdef DEBUG +#include #define DBG(fmt...) udbg_printf(fmt) #else #define DBG(fmt...) #endif +int smp_hw_index[NR_CPUS]; +struct thread_info *secondary_ti; + cpumask_t cpu_possible_map = CPU_MASK_NONE; cpumask_t cpu_online_map = CPU_MASK_NONE; cpumask_t cpu_sibling_map[NR_CPUS] = { [0 ... NR_CPUS-1] = CPU_MASK_NONE }; diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c index 5800cde7d5a..25181c594d7 100644 --- a/arch/powerpc/platforms/pseries/smp.c +++ b/arch/powerpc/platforms/pseries/smp.c @@ -51,6 +51,7 @@ #include "plpar_wrappers.h" #ifdef DEBUG +#include #define DBG(fmt...) udbg_printf(fmt) #else #define DBG(fmt...) -- cgit v1.2.3 From b5166cc252190be80465f3b4f050e4a0310f71af Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 15 Nov 2005 16:05:33 +1100 Subject: [PATCH] powerpc: pci_64 fixes & cleanups I discovered that in some cases (PowerMac for example) we wouldn't properly map the PCI IO space on recent kernels. In addition, the code for initializing PCI host bridges was scattered all over the place with some duplication between platforms. This patch fixes the problem and does a small cleanup by creating a pcibios_alloc_controller() in pci_64.c that is similar to the one in pci_32.c (just takes an additional device node argument) that takes care of all the grunt allocation and initialisation work. It should work for both boot time and dynamically allocated PHBs. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/pci_64.c | 68 +++++++++++++++++++++++++++++++++-- arch/powerpc/kernel/rtas_pci.c | 68 +++-------------------------------- arch/powerpc/platforms/iseries/pci.c | 3 +- arch/powerpc/platforms/maple/pci.c | 16 +-------- arch/powerpc/platforms/powermac/pci.c | 62 ++++++++++++++++---------------- 5 files changed, 104 insertions(+), 113 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c index d7de3ec0bf8..5a5b2468508 100644 --- a/arch/powerpc/kernel/pci_64.c +++ b/arch/powerpc/kernel/pci_64.c @@ -187,7 +187,7 @@ static DEFINE_SPINLOCK(hose_spinlock); /* * pci_controller(phb) initialized common variables. */ -void __devinit pci_setup_pci_controller(struct pci_controller *hose) +static void __devinit pci_setup_pci_controller(struct pci_controller *hose) { memset(hose, 0, sizeof(struct pci_controller)); @@ -197,6 +197,65 @@ void __devinit pci_setup_pci_controller(struct pci_controller *hose) spin_unlock(&hose_spinlock); } +static void add_linux_pci_domain(struct device_node *dev, + struct pci_controller *phb) +{ + struct property *of_prop; + unsigned int size; + + of_prop = (struct property *) + get_property(dev, "linux,pci-domain", &size); + if (of_prop != NULL) + return; + WARN_ON(of_prop && size < sizeof(int)); + if (of_prop && size < sizeof(int)) + of_prop = NULL; + size = sizeof(struct property) + sizeof(int); + if (of_prop == NULL) { + if (mem_init_done) + of_prop = kmalloc(size, GFP_KERNEL); + else + of_prop = alloc_bootmem(size); + } + memset(of_prop, 0, sizeof(struct property)); + of_prop->name = "linux,pci-domain"; + of_prop->length = sizeof(int); + of_prop->value = (unsigned char *)&of_prop[1]; + *((int *)of_prop->value) = phb->global_number; + prom_add_property(dev, of_prop); +} + +struct pci_controller * pcibios_alloc_controller(struct device_node *dev) +{ + struct pci_controller *phb; + + if (mem_init_done) + phb = kmalloc(sizeof(struct pci_controller), GFP_KERNEL); + else + phb = alloc_bootmem(sizeof (struct pci_controller)); + if (phb == NULL) + return NULL; + pci_setup_pci_controller(phb); + phb->arch_data = dev; + phb->is_dynamic = mem_init_done; + if (dev) + add_linux_pci_domain(dev, phb); + return phb; +} + +void pcibios_free_controller(struct pci_controller *phb) +{ + if (phb->arch_data) { + struct device_node *np = phb->arch_data; + int *domain = (int *)get_property(np, + "linux,pci-domain", NULL); + if (domain) + *domain = -1; + } + if (phb->is_dynamic) + kfree(phb); +} + static void __init pcibios_claim_one_bus(struct pci_bus *b) { struct pci_dev *dev; @@ -907,9 +966,10 @@ void __devinit pci_process_bridge_OF_ranges(struct pci_controller *hose, * (size depending on dev->n_addr_cells) * cells 4+5 or 5+6: the size of the range */ - rlen = 0; - hose->io_base_phys = 0; ranges = (unsigned int *) get_property(dev, "ranges", &rlen); + if (ranges == NULL) + return; + hose->io_base_phys = 0; while ((rlen -= np * sizeof(unsigned int)) >= 0) { res = NULL; pci_space = ranges[0]; @@ -1107,6 +1167,8 @@ int remap_bus_range(struct pci_bus *bus) if (get_bus_io_range(bus, &start_phys, &start_virt, &size)) return 1; + if (start_phys == 0) + return 1; printk("mapping IO %lx -> %lx, size: %lx\n", start_phys, start_virt, size); if (__ioremap_explicit(start_phys, start_virt, size, _PAGE_NO_CACHE | _PAGE_GUARDED)) diff --git a/arch/powerpc/kernel/rtas_pci.c b/arch/powerpc/kernel/rtas_pci.c index 0e5a8e11665..60dec2401c2 100644 --- a/arch/powerpc/kernel/rtas_pci.c +++ b/arch/powerpc/kernel/rtas_pci.c @@ -304,75 +304,18 @@ static int __devinit setup_phb(struct device_node *dev, struct pci_controller *phb, unsigned int addr_size_words) { - pci_setup_pci_controller(phb); - if (is_python(dev)) python_countermeasures(dev, addr_size_words); if (phb_set_bus_ranges(dev, phb)) return 1; - phb->arch_data = dev; phb->ops = &rtas_pci_ops; phb->buid = get_phb_buid(dev); return 0; } -static void __devinit add_linux_pci_domain(struct device_node *dev, - struct pci_controller *phb, - struct property *of_prop) -{ - memset(of_prop, 0, sizeof(struct property)); - of_prop->name = "linux,pci-domain"; - of_prop->length = sizeof(phb->global_number); - of_prop->value = (unsigned char *)&of_prop[1]; - memcpy(of_prop->value, &phb->global_number, sizeof(phb->global_number)); - prom_add_property(dev, of_prop); -} - -static struct pci_controller * __init alloc_phb(struct device_node *dev, - unsigned int addr_size_words) -{ - struct pci_controller *phb; - struct property *of_prop; - - phb = alloc_bootmem(sizeof(struct pci_controller)); - if (phb == NULL) - return NULL; - - of_prop = alloc_bootmem(sizeof(struct property) + - sizeof(phb->global_number)); - if (!of_prop) - return NULL; - - if (setup_phb(dev, phb, addr_size_words)) - return NULL; - - add_linux_pci_domain(dev, phb, of_prop); - - return phb; -} - -static struct pci_controller * __devinit alloc_phb_dynamic(struct device_node *dev, unsigned int addr_size_words) -{ - struct pci_controller *phb; - - phb = (struct pci_controller *)kmalloc(sizeof(struct pci_controller), - GFP_KERNEL); - if (phb == NULL) - return NULL; - - if (setup_phb(dev, phb, addr_size_words)) - return NULL; - - phb->is_dynamic = 1; - - /* TODO: linux,pci-domain? */ - - return phb; -} - unsigned long __init find_and_init_phbs(void) { struct device_node *node; @@ -397,10 +340,10 @@ unsigned long __init find_and_init_phbs(void) if (node->type == NULL || strcmp(node->type, "pci") != 0) continue; - phb = alloc_phb(node, root_size_cells); + phb = pcibios_alloc_controller(node); if (!phb) continue; - + setup_phb(node, phb, root_size_cells); pci_process_bridge_OF_ranges(phb, node, 0); pci_setup_phb_io(phb, index == 0); #ifdef CONFIG_PPC_PSERIES @@ -446,10 +389,10 @@ struct pci_controller * __devinit init_phb_dynamic(struct device_node *dn) root_size_cells = prom_n_size_cells(root); primary = list_empty(&hose_list); - phb = alloc_phb_dynamic(dn, root_size_cells); + phb = pcibios_alloc_controller(dn); if (!phb) return NULL; - + setup_phb(dn, phb, root_size_cells); pci_process_bridge_OF_ranges(phb, dn, primary); pci_setup_phb_io_dynamic(phb, primary); @@ -505,8 +448,7 @@ int pcibios_remove_root_bus(struct pci_controller *phb) } list_del(&phb->list_node); - if (phb->is_dynamic) - kfree(phb); + pcibios_free_controller(phb); return 0; } diff --git a/arch/powerpc/platforms/iseries/pci.c b/arch/powerpc/platforms/iseries/pci.c index 4b75131773a..dafc518fbb8 100644 --- a/arch/powerpc/platforms/iseries/pci.c +++ b/arch/powerpc/platforms/iseries/pci.c @@ -244,10 +244,9 @@ unsigned long __init find_and_init_phbs(void) if (ret == 0) { printk("bus %d appears to exist\n", bus); - phb = (struct pci_controller *)kmalloc(sizeof(struct pci_controller), GFP_KERNEL); + phb = pcibios_alloc_controller(NULL); if (phb == NULL) return -ENOMEM; - pci_setup_pci_controller(phb); phb->pci_mem_offset = phb->local_number = bus; phb->first_busno = bus; diff --git a/arch/powerpc/platforms/maple/pci.c b/arch/powerpc/platforms/maple/pci.c index 895aeb3f75d..f40451da037 100644 --- a/arch/powerpc/platforms/maple/pci.c +++ b/arch/powerpc/platforms/maple/pci.c @@ -326,26 +326,12 @@ static int __init add_bridge(struct device_node *dev) dev->full_name); } - hose = alloc_bootmem(sizeof(struct pci_controller)); + hose = pcibios_alloc_controller(dev); if (hose == NULL) return -ENOMEM; - pci_setup_pci_controller(hose); - - hose->arch_data = dev; hose->first_busno = bus_range ? bus_range[0] : 0; hose->last_busno = bus_range ? bus_range[1] : 0xff; - of_prop = alloc_bootmem(sizeof(struct property) + - sizeof(hose->global_number)); - if (of_prop) { - memset(of_prop, 0, sizeof(struct property)); - of_prop->name = "linux,pci-domain"; - of_prop->length = sizeof(hose->global_number); - of_prop->value = (unsigned char *)&of_prop[1]; - memcpy(of_prop->value, &hose->global_number, sizeof(hose->global_number)); - prom_add_property(dev, of_prop); - } - disp_name = NULL; if (device_is_compatible(dev, "u3-agp")) { setup_u3_agp(hose); diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c index dfd41b9781a..443be526cde 100644 --- a/arch/powerpc/platforms/powermac/pci.c +++ b/arch/powerpc/platforms/powermac/pci.c @@ -640,15 +640,16 @@ static void __init setup_u3_ht(struct pci_controller* hose) * the reg address cell, we shall fix that by killing struct * reg_property and using some accessor functions instead */ - hose->cfg_data = (volatile unsigned char *)ioremap(0xf2000000, 0x02000000); + hose->cfg_data = (volatile unsigned char *)ioremap(0xf2000000, + 0x02000000); /* - * /ht node doesn't expose a "ranges" property, so we "remove" regions that - * have been allocated to AGP. So far, this version of the code doesn't assign - * any of the 0xfxxxxxxx "fine" memory regions to /ht. - * We need to fix that sooner or later by either parsing all child "ranges" - * properties or figuring out the U3 address space decoding logic and - * then read its configuration register (if any). + * /ht node doesn't expose a "ranges" property, so we "remove" + * regions that have been allocated to AGP. So far, this version of + * the code doesn't assign any of the 0xfxxxxxxx "fine" memory regions + * to /ht. We need to fix that sooner or later by either parsing all + * child "ranges" properties or figuring out the U3 address space + * decoding logic and then read its configuration register (if any). */ hose->io_base_phys = 0xf4000000; hose->pci_io_size = 0x00400000; @@ -671,10 +672,10 @@ static void __init setup_u3_ht(struct pci_controller* hose) return; } - /* We "remove" the AGP resources from the resources allocated to HT, that - * is we create "holes". However, that code does assumptions that so far - * happen to be true (cross fingers...), typically that resources in the - * AGP node are properly ordered + /* We "remove" the AGP resources from the resources allocated to HT, + * that is we create "holes". However, that code does assumptions + * that so far happen to be true (cross fingers...), typically that + * resources in the AGP node are properly ordered */ cur = 0; for (i=0; i<3; i++) { @@ -684,23 +685,30 @@ static void __init setup_u3_ht(struct pci_controller* hose) /* We don't care about "fine" resources */ if (res->start >= 0xf0000000) continue; - /* Check if it's just a matter of "shrinking" us in one direction */ + /* Check if it's just a matter of "shrinking" us in one + * direction + */ if (hose->mem_resources[cur].start == res->start) { DBG("U3/HT: shrink start of %d, %08lx -> %08lx\n", - cur, hose->mem_resources[cur].start, res->end + 1); + cur, hose->mem_resources[cur].start, + res->end + 1); hose->mem_resources[cur].start = res->end + 1; continue; } if (hose->mem_resources[cur].end == res->end) { DBG("U3/HT: shrink end of %d, %08lx -> %08lx\n", - cur, hose->mem_resources[cur].end, res->start - 1); + cur, hose->mem_resources[cur].end, + res->start - 1); hose->mem_resources[cur].end = res->start - 1; continue; } /* No, it's not the case, we need a hole */ if (cur == 2) { - /* not enough resources for a hole, we drop part of the range */ - printk(KERN_WARNING "Running out of resources for /ht host !\n"); + /* not enough resources for a hole, we drop part + * of the range + */ + printk(KERN_WARNING "Running out of resources" + " for /ht host !\n"); hose->mem_resources[cur].end = res->start - 1; continue; } @@ -714,17 +722,6 @@ static void __init setup_u3_ht(struct pci_controller* hose) hose->mem_resources[cur-1].end = res->start - 1; } } - -/* XXX this needs to be converged between ppc32 and ppc64... */ -static struct pci_controller * __init pcibios_alloc_controller(void) -{ - struct pci_controller *hose; - - hose = alloc_bootmem(sizeof(struct pci_controller)); - if (hose) - pci_setup_pci_controller(hose); - return hose; -} #endif /* @@ -756,11 +753,16 @@ static int __init add_bridge(struct device_node *dev) #endif bus_range = (int *) get_property(dev, "bus-range", &len); if (bus_range == NULL || len < 2 * sizeof(int)) { - printk(KERN_WARNING "Can't get bus-range for %s, assume bus 0\n", - dev->full_name); + printk(KERN_WARNING "Can't get bus-range for %s, assume" + " bus 0\n", dev->full_name); } + /* XXX Different prototypes, to be merged */ +#ifdef CONFIG_PPC64 + hose = pcibios_alloc_controller(dev); +#else hose = pcibios_alloc_controller(); +#endif if (!hose) return -ENOMEM; hose->arch_data = dev; @@ -768,7 +770,7 @@ static int __init add_bridge(struct device_node *dev) hose->last_busno = bus_range ? bus_range[1] : 0xff; disp_name = NULL; -#ifdef CONFIG_POWER4 +#ifdef CONFIG_PPC64 if (device_is_compatible(dev, "u3-agp")) { setup_u3_agp(hose); disp_name = "U3-AGP"; -- cgit v1.2.3 From 950fc0025f8566d1c44da04fed216513f83268af Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Tue, 15 Nov 2005 09:05:14 -0800 Subject: [PATCH] powerpc: add new powerbooks to feature table Hi, The previous PowerBook patch didn't contain the feature table updates for ARCH=powerpc. Here they are. Signed-off-by: Olof Johansson Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/powermac/feature.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/powermac/feature.c b/arch/powerpc/platforms/powermac/feature.c index 10f1d942c66..0d7fa00fcb0 100644 --- a/arch/powerpc/platforms/powermac/feature.c +++ b/arch/powerpc/platforms/powermac/feature.c @@ -2362,6 +2362,14 @@ static struct pmac_mb_def pmac_mb_defs[] = { PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, }, + { "PowerBook5,8", "PowerBook G4 15\"", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, + }, + { "PowerBook5,9", "PowerBook G4 17\"", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, + }, { "PowerBook6,1", "PowerBook G4 12\"", PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, -- cgit v1.2.3 From 94b212c29f685ca54b5689a8e89ac7671c43d651 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Wed, 16 Nov 2005 13:38:21 +1100 Subject: powerpc: Move ppc64 boot wrapper code over to arch/powerpc This also extends the code to handle 32-bit ELF vmlinux files as well as 64-bit ones. This is sufficient for booting on new-world 32-bit powermacs (i.e. all recent machines). Signed-off-by: Paul Mackerras --- arch/powerpc/Makefile | 25 +-- arch/powerpc/boot/Makefile | 149 ++++++++++++ arch/powerpc/boot/README | 11 + arch/powerpc/boot/addRamDisk.c | 311 +++++++++++++++++++++++++ arch/powerpc/boot/addnote.c | 205 +++++++++++++++++ arch/powerpc/boot/crt0.S | 59 +++++ arch/powerpc/boot/div64.S | 58 +++++ arch/powerpc/boot/elf.h | 149 ++++++++++++ arch/powerpc/boot/install.sh | 42 ++++ arch/powerpc/boot/main.c | 321 ++++++++++++++++++++++++++ arch/powerpc/boot/page.h | 34 +++ arch/powerpc/boot/ppc_asm.h | 62 +++++ arch/powerpc/boot/prom.c | 499 +++++++++++++++++++++++++++++++++++++++++ arch/powerpc/boot/prom.h | 18 ++ arch/powerpc/boot/stdio.h | 16 ++ arch/powerpc/boot/string.S | 216 ++++++++++++++++++ arch/powerpc/boot/string.h | 17 ++ arch/powerpc/boot/zImage.lds | 46 ++++ 18 files changed, 2220 insertions(+), 18 deletions(-) create mode 100644 arch/powerpc/boot/Makefile create mode 100644 arch/powerpc/boot/README create mode 100644 arch/powerpc/boot/addRamDisk.c create mode 100644 arch/powerpc/boot/addnote.c create mode 100644 arch/powerpc/boot/crt0.S create mode 100644 arch/powerpc/boot/div64.S create mode 100644 arch/powerpc/boot/elf.h create mode 100644 arch/powerpc/boot/install.sh create mode 100644 arch/powerpc/boot/main.c create mode 100644 arch/powerpc/boot/page.h create mode 100644 arch/powerpc/boot/ppc_asm.h create mode 100644 arch/powerpc/boot/prom.c create mode 100644 arch/powerpc/boot/prom.h create mode 100644 arch/powerpc/boot/stdio.h create mode 100644 arch/powerpc/boot/string.S create mode 100644 arch/powerpc/boot/string.h create mode 100644 arch/powerpc/boot/zImage.lds (limited to 'arch/powerpc') diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index d41ad2e675d..99dbea8c5c5 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -14,10 +14,6 @@ HAS_BIARCH := $(call cc-option-yn, -m32) -ifeq ($(CONFIG_PPC64),y) -OLDARCH := ppc64 -SZ := 64 - # Set default 32 bits cross compilers for vdso and boot wrapper CROSS32_COMPILE ?= @@ -37,6 +33,10 @@ endif export CROSS32CC CROSS32AS CROSS32LD CROSS32OBJCOPY +ifeq ($(CONFIG_PPC64),y) +OLDARCH := ppc64 +SZ := 64 + new_nm := $(shell if $(NM) --help 2>&1 | grep -- '--synthetic' > /dev/null; then echo y; else echo n; fi) ifeq ($(new_nm),y) @@ -139,7 +139,7 @@ drivers-$(CONFIG_CPM2) += arch/ppc/8260_io/ drivers-$(CONFIG_OPROFILE) += arch/powerpc/oprofile/ -defaultimage-$(CONFIG_PPC32) := uImage zImage +defaultimage-$(CONFIG_PPC32) := zImage defaultimage-$(CONFIG_PPC_ISERIES) := vmlinux defaultimage-$(CONFIG_PPC_PSERIES) := zImage KBUILD_IMAGE := $(defaultimage-y) @@ -154,23 +154,13 @@ BOOT_TARGETS = zImage zImage.initrd znetboot znetboot.initrd vmlinux.sm .PHONY: $(BOOT_TARGETS) -boot := arch/$(OLDARCH)/boot +boot := arch/$(ARCH)/boot -# urk -ifeq ($(CONFIG_PPC64),y) $(BOOT_TARGETS): vmlinux $(Q)$(MAKE) ARCH=ppc64 $(build)=$(boot) $(patsubst %,$(boot)/%,$@) -else -$(BOOT_TARGETS): vmlinux - $(Q)$(MAKE) ARCH=ppc $(build)=$(boot) $@ -endif - -uImage: vmlinux - $(Q)$(MAKE) ARCH=$(OLDARCH) $(build)=$(boot)/images $(boot)/images/$@ define archhelp - @echo '* zImage - Compressed kernel image (arch/$(ARCH)/boot/images/zImage.*)' - @echo ' uImage - Create a bootable image for U-Boot / PPCBoot' + @echo '* zImage - Compressed kernel image (arch/$(ARCH)/boot/zImage.*)' @echo ' install - Install kernel using' @echo ' (your) ~/bin/installkernel or' @echo ' (distribution) /sbin/installkernel or' @@ -180,7 +170,6 @@ endef archclean: $(Q)$(MAKE) $(clean)=$(boot) - # Temporary hack until we have migrated to asm-powerpc $(Q)rm -rf arch/$(ARCH)/include archprepare: checkbin diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile new file mode 100644 index 00000000000..9770f587af7 --- /dev/null +++ b/arch/powerpc/boot/Makefile @@ -0,0 +1,149 @@ +# Makefile for making ELF bootable images for booting on CHRP +# using Open Firmware. +# +# Geert Uytterhoeven September 1997 +# +# Based on coffboot by Paul Mackerras +# Simplified for ppc64 by Todd Inglett +# +# NOTE: this code is built for 32 bit in ELF32 format even though +# it packages a 64 bit kernel. We do this to simplify the +# bootloader and increase compatibility with OpenFirmware. +# +# To this end we need to define BOOTCC, etc, as the tools +# needed to build the 32 bit image. These are normally HOSTCC, +# but may be a third compiler if, for example, you are cross +# compiling from an intel box. Once the 64bit ppc gcc is +# stable it will probably simply be a compiler switch to +# compile for 32bit mode. +# To make it easier to setup a cross compiler, +# CROSS32_COMPILE is setup as a prefix just like CROSS_COMPILE +# in the toplevel makefile. + + +HOSTCC := gcc +BOOTCFLAGS := $(HOSTCFLAGS) -fno-builtin -nostdinc -isystem \ + $(shell $(CROSS32CC) -print-file-name=include) -fPIC +BOOTAFLAGS := -D__ASSEMBLY__ $(BOOTCFLAGS) -traditional -nostdinc +BOOTLFLAGS := -T $(srctree)/$(src)/zImage.lds +OBJCOPYFLAGS := contents,alloc,load,readonly,data + +zlib := infblock.c infcodes.c inffast.c inflate.c inftrees.c infutil.c +zlibheader := infblock.h infcodes.h inffast.h inftrees.h infutil.h +zliblinuxheader := zlib.h zconf.h zutil.h + +$(addprefix $(obj)/,$(zlib) main.o): $(addprefix $(obj)/,$(zliblinuxheader)) $(addprefix $(obj)/,$(zlibheader)) +#$(addprefix $(obj)/,main.o): $(addprefix $(obj)/,zlib.h) + +src-boot := string.S prom.c main.c div64.S crt0.S +src-boot += $(zlib) +src-boot := $(addprefix $(obj)/, $(src-boot)) +obj-boot := $(addsuffix .o, $(basename $(src-boot))) + +BOOTCFLAGS += -I$(obj) -I$(srctree)/$(obj) + +quiet_cmd_copy_zlib = COPY $@ + cmd_copy_zlib = sed "s@__attribute_used__@@;s@]\+\).*@\"\1\"@" $< > $@ + +quiet_cmd_copy_zlibheader = COPY $@ + cmd_copy_zlibheader = sed "s@]\+\).*@\"\1\"@" $< > $@ +# stddef.h for NULL +quiet_cmd_copy_zliblinuxheader = COPY $@ + cmd_copy_zliblinuxheader = sed "s@@\"string.h\"@;s@@@;s@]\+\).*@\"\1\"@" $< > $@ + +$(addprefix $(obj)/,$(zlib)): $(obj)/%: $(srctree)/lib/zlib_inflate/% + $(call cmd,copy_zlib) + +$(addprefix $(obj)/,$(zlibheader)): $(obj)/%: $(srctree)/lib/zlib_inflate/% + $(call cmd,copy_zlibheader) + +$(addprefix $(obj)/,$(zliblinuxheader)): $(obj)/%: $(srctree)/include/linux/% + $(call cmd,copy_zliblinuxheader) + +clean-files := $(zlib) $(zlibheader) $(zliblinuxheader) + + +quiet_cmd_bootcc = BOOTCC $@ + cmd_bootcc = $(CROSS32CC) -Wp,-MD,$(depfile) $(BOOTCFLAGS) -c -o $@ $< + +quiet_cmd_bootas = BOOTAS $@ + cmd_bootas = $(CROSS32CC) -Wp,-MD,$(depfile) $(BOOTAFLAGS) -c -o $@ $< + +quiet_cmd_bootld = BOOTLD $@ + cmd_bootld = $(CROSS32LD) $(BOOTLFLAGS) -o $@ $(2) + +$(patsubst %.c,%.o, $(filter %.c, $(src-boot))): %.o: %.c + $(call if_changed_dep,bootcc) +$(patsubst %.S,%.o, $(filter %.S, $(src-boot))): %.o: %.S + $(call if_changed_dep,bootas) + +#----------------------------------------------------------- +# ELF sections within the zImage bootloader/wrapper +#----------------------------------------------------------- +required := vmlinux.strip +initrd := initrd + +obj-sec = $(foreach section, $(1), $(patsubst %,$(obj)/kernel-%.o, $(section))) +src-sec = $(foreach section, $(1), $(patsubst %,$(obj)/kernel-%.c, $(section))) +gz-sec = $(foreach section, $(1), $(patsubst %,$(obj)/kernel-%.gz, $(section))) + +hostprogs-y := addnote addRamDisk +targets += zImage.vmode zImage.initrd.vmode zImage zImage.initrd \ + $(patsubst $(obj)/%,%, $(call obj-sec, $(required) $(initrd))) \ + $(patsubst $(obj)/%,%, $(call src-sec, $(required) $(initrd))) \ + $(patsubst $(obj)/%,%, $(call gz-sec, $(required) $(initrd))) \ + vmlinux.initrd +extra-y := initrd.o + +quiet_cmd_ramdisk = RAMDISK $@ + cmd_ramdisk = $(obj)/addRamDisk $(obj)/ramdisk.image.gz $< $@ + +quiet_cmd_stripvm = STRIP $@ + cmd_stripvm = $(STRIP) -s -R .comment $< -o $@ + +vmlinux.strip: vmlinux + $(call if_changed,stripvm) +$(obj)/vmlinux.initrd: vmlinux.strip $(obj)/addRamDisk $(obj)/ramdisk.image.gz + $(call if_changed,ramdisk) + +quiet_cmd_addsection = ADDSEC $@ + cmd_addsection = $(CROSS32OBJCOPY) $@ \ + --add-section=.kernel:$(strip $(patsubst $(obj)/kernel-%.o,%, $@))=$(patsubst %.o,%.gz, $@) \ + --set-section-flags=.kernel:$(strip $(patsubst $(obj)/kernel-%.o,%, $@))=$(OBJCOPYFLAGS) + +quiet_cmd_addnote = ADDNOTE $@ + cmd_addnote = $(obj)/addnote $@ + +$(call gz-sec, $(required)): $(obj)/kernel-%.gz: % + $(call if_changed,gzip) + +$(obj)/kernel-initrd.gz: $(obj)/ramdisk.image.gz + cp -f $(obj)/ramdisk.image.gz $@ + +$(call src-sec, $(required) $(initrd)): $(obj)/kernel-%.c: $(obj)/kernel-%.gz + @touch $@ + +$(call obj-sec, $(required) $(initrd)): $(obj)/kernel-%.o: $(obj)/kernel-%.c + $(call if_changed_dep,bootcc) + $(call cmd,addsection) + +$(obj)/zImage.vmode: obj-boot += $(call obj-sec, $(required)) +$(obj)/zImage.vmode: $(call obj-sec, $(required)) $(obj-boot) $(srctree)/$(src)/zImage.lds + $(call cmd,bootld,$(obj-boot)) + +$(obj)/zImage.initrd.vmode: obj-boot += $(call obj-sec, $(required) $(initrd)) +$(obj)/zImage.initrd.vmode: $(call obj-sec, $(required) $(initrd)) $(obj-boot) $(srctree)/$(src)/zImage.lds + $(call cmd,bootld,$(obj-boot)) + +$(obj)/zImage: $(obj)/zImage.vmode $(obj)/addnote + @cp -f $< $@ + $(call if_changed,addnote) + +$(obj)/zImage.initrd: $(obj)/zImage.initrd.vmode $(obj)/addnote + @cp -f $< $@ + $(call if_changed,addnote) + +install: $(CONFIGURE) $(BOOTIMAGE) + sh -x $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" vmlinux System.map "$(INSTALL_PATH)" "$(BOOTIMAGE)" + +clean-files := $(addprefix $(objtree)/, $(obj-boot) vmlinux.strip) diff --git a/arch/powerpc/boot/README b/arch/powerpc/boot/README new file mode 100644 index 00000000000..3e11058760e --- /dev/null +++ b/arch/powerpc/boot/README @@ -0,0 +1,11 @@ + +To extract the kernel vmlinux, System.map, .config or initrd from the zImage binary: + +objcopy -j .kernel:vmlinux -O binary zImage vmlinux.gz +objcopy -j .kernel:System.map -O binary zImage System.map.gz +objcopy -j .kernel:.config -O binary zImage config.gz +objcopy -j .kernel:initrd -O binary zImage.initrd initrd.gz + + + Peter + diff --git a/arch/powerpc/boot/addRamDisk.c b/arch/powerpc/boot/addRamDisk.c new file mode 100644 index 00000000000..c02a99952be --- /dev/null +++ b/arch/powerpc/boot/addRamDisk.c @@ -0,0 +1,311 @@ +#include +#include +#include +#include +#include +#include +#include +#include + +#define ElfHeaderSize (64 * 1024) +#define ElfPages (ElfHeaderSize / 4096) +#define KERNELBASE (0xc000000000000000) +#define _ALIGN_UP(addr,size) (((addr)+((size)-1))&(~((size)-1))) + +struct addr_range { + unsigned long long addr; + unsigned long memsize; + unsigned long offset; +}; + +static int check_elf64(void *p, int size, struct addr_range *r) +{ + Elf64_Ehdr *elf64 = p; + Elf64_Phdr *elf64ph; + + if (elf64->e_ident[EI_MAG0] != ELFMAG0 || + elf64->e_ident[EI_MAG1] != ELFMAG1 || + elf64->e_ident[EI_MAG2] != ELFMAG2 || + elf64->e_ident[EI_MAG3] != ELFMAG3 || + elf64->e_ident[EI_CLASS] != ELFCLASS64 || + elf64->e_ident[EI_DATA] != ELFDATA2MSB || + elf64->e_type != ET_EXEC || elf64->e_machine != EM_PPC64) + return 0; + + if ((elf64->e_phoff + sizeof(Elf64_Phdr)) > size) + return 0; + + elf64ph = (Elf64_Phdr *) ((unsigned long)elf64 + + (unsigned long)elf64->e_phoff); + + r->memsize = (unsigned long)elf64ph->p_memsz; + r->offset = (unsigned long)elf64ph->p_offset; + r->addr = (unsigned long long)elf64ph->p_vaddr; + +#ifdef DEBUG + printf("PPC64 ELF file, ph:\n"); + printf("p_type 0x%08x\n", elf64ph->p_type); + printf("p_flags 0x%08x\n", elf64ph->p_flags); + printf("p_offset 0x%016llx\n", elf64ph->p_offset); + printf("p_vaddr 0x%016llx\n", elf64ph->p_vaddr); + printf("p_paddr 0x%016llx\n", elf64ph->p_paddr); + printf("p_filesz 0x%016llx\n", elf64ph->p_filesz); + printf("p_memsz 0x%016llx\n", elf64ph->p_memsz); + printf("p_align 0x%016llx\n", elf64ph->p_align); + printf("... skipping 0x%08lx bytes of ELF header\n", + (unsigned long)elf64ph->p_offset); +#endif + + return 64; +} +void get4k(FILE *file, char *buf ) +{ + unsigned j; + unsigned num = fread(buf, 1, 4096, file); + for ( j=num; j<4096; ++j ) + buf[j] = 0; +} + +void put4k(FILE *file, char *buf ) +{ + fwrite(buf, 1, 4096, file); +} + +void death(const char *msg, FILE *fdesc, const char *fname) +{ + fprintf(stderr, msg); + fclose(fdesc); + unlink(fname); + exit(1); +} + +int main(int argc, char **argv) +{ + char inbuf[4096]; + struct addr_range vmlinux; + FILE *ramDisk; + FILE *inputVmlinux; + FILE *outputVmlinux; + + char *rd_name, *lx_name, *out_name; + + size_t i; + unsigned long ramFileLen; + unsigned long ramLen; + unsigned long roundR; + unsigned long offset_end; + + unsigned long kernelLen; + unsigned long actualKernelLen; + unsigned long round; + unsigned long roundedKernelLen; + unsigned long ramStartOffs; + unsigned long ramPages; + unsigned long roundedKernelPages; + unsigned long hvReleaseData; + u_int32_t eyeCatcher = 0xc8a5d9c4; + unsigned long naca; + unsigned long xRamDisk; + unsigned long xRamDiskSize; + long padPages; + + + if (argc < 2) { + fprintf(stderr, "Name of RAM disk file missing.\n"); + exit(1); + } + rd_name = argv[1]; + + if (argc < 3) { + fprintf(stderr, "Name of vmlinux file missing.\n"); + exit(1); + } + lx_name = argv[2]; + + if (argc < 4) { + fprintf(stderr, "Name of vmlinux output file missing.\n"); + exit(1); + } + out_name = argv[3]; + + + ramDisk = fopen(rd_name, "r"); + if ( ! ramDisk ) { + fprintf(stderr, "RAM disk file \"%s\" failed to open.\n", rd_name); + exit(1); + } + + inputVmlinux = fopen(lx_name, "r"); + if ( ! inputVmlinux ) { + fprintf(stderr, "vmlinux file \"%s\" failed to open.\n", lx_name); + exit(1); + } + + outputVmlinux = fopen(out_name, "w+"); + if ( ! outputVmlinux ) { + fprintf(stderr, "output vmlinux file \"%s\" failed to open.\n", out_name); + exit(1); + } + + i = fread(inbuf, 1, sizeof(inbuf), inputVmlinux); + if (i != sizeof(inbuf)) { + fprintf(stderr, "can not read vmlinux file %s: %u\n", lx_name, i); + exit(1); + } + + i = check_elf64(inbuf, sizeof(inbuf), &vmlinux); + if (i == 0) { + fprintf(stderr, "You must have a linux kernel specified as argv[2]\n"); + exit(1); + } + + /* Input Vmlinux file */ + fseek(inputVmlinux, 0, SEEK_END); + kernelLen = ftell(inputVmlinux); + fseek(inputVmlinux, 0, SEEK_SET); + printf("kernel file size = %lu\n", kernelLen); + + actualKernelLen = kernelLen - ElfHeaderSize; + + printf("actual kernel length (minus ELF header) = %lu\n", actualKernelLen); + + round = actualKernelLen % 4096; + roundedKernelLen = actualKernelLen; + if ( round ) + roundedKernelLen += (4096 - round); + printf("Vmlinux length rounded up to a 4k multiple = %ld/0x%lx \n", roundedKernelLen, roundedKernelLen); + roundedKernelPages = roundedKernelLen / 4096; + printf("Vmlinux pages to copy = %ld/0x%lx \n", roundedKernelPages, roundedKernelPages); + + offset_end = _ALIGN_UP(vmlinux.memsize, 4096); + /* calc how many pages we need to insert between the vmlinux and the start of the ram disk */ + padPages = offset_end/4096 - roundedKernelPages; + + /* Check and see if the vmlinux is already larger than _end in System.map */ + if (padPages < 0) { + /* vmlinux is larger than _end - adjust the offset to the start of the embedded ram disk */ + offset_end = roundedKernelLen; + printf("vmlinux is larger than _end indicates it needs to be - offset_end = %lx \n", offset_end); + padPages = 0; + printf("will insert %lx pages between the vmlinux and the start of the ram disk \n", padPages); + } + else { + /* _end is larger than vmlinux - use the offset to _end that we calculated from the system map */ + printf("vmlinux is smaller than _end indicates is needed - offset_end = %lx \n", offset_end); + printf("will insert %lx pages between the vmlinux and the start of the ram disk \n", padPages); + } + + + + /* Input Ram Disk file */ + // Set the offset that the ram disk will be started at. + ramStartOffs = offset_end; /* determined from the input vmlinux file and the system map */ + printf("Ram Disk will start at offset = 0x%lx \n", ramStartOffs); + + fseek(ramDisk, 0, SEEK_END); + ramFileLen = ftell(ramDisk); + fseek(ramDisk, 0, SEEK_SET); + printf("%s file size = %ld/0x%lx \n", rd_name, ramFileLen, ramFileLen); + + ramLen = ramFileLen; + + roundR = 4096 - (ramLen % 4096); + if ( roundR ) { + printf("Rounding RAM disk file up to a multiple of 4096, adding %ld/0x%lx \n", roundR, roundR); + ramLen += roundR; + } + + printf("Rounded RAM disk size is %ld/0x%lx \n", ramLen, ramLen); + ramPages = ramLen / 4096; + printf("RAM disk pages to copy = %ld/0x%lx\n", ramPages, ramPages); + + + + // Copy 64K ELF header + for (i=0; i<(ElfPages); ++i) { + get4k( inputVmlinux, inbuf ); + put4k( outputVmlinux, inbuf ); + } + + /* Copy the vmlinux (as full pages). */ + fseek(inputVmlinux, ElfHeaderSize, SEEK_SET); + for ( i=0; i +#include +#include +#include +#include + +/* CHRP note section */ +char arch[] = "PowerPC"; + +#define N_DESCR 6 +unsigned int descr[N_DESCR] = { + 0xffffffff, /* real-mode = true */ + 0x00c00000, /* real-base, i.e. where we expect OF to be */ + 0xffffffff, /* real-size */ + 0xffffffff, /* virt-base */ + 0xffffffff, /* virt-size */ + 0x4000, /* load-base */ +}; + +/* RPA note section */ +char rpaname[] = "IBM,RPA-Client-Config"; + +/* + * Note: setting ignore_my_client_config *should* mean that OF ignores + * all the other fields, but there is a firmware bug which means that + * it looks at the splpar field at least. So these values need to be + * reasonable. + */ +#define N_RPA_DESCR 8 +unsigned int rpanote[N_RPA_DESCR] = { + 0, /* lparaffinity */ + 64, /* min_rmo_size */ + 0, /* min_rmo_percent */ + 40, /* max_pft_size */ + 1, /* splpar */ + -1, /* min_load */ + 0, /* new_mem_def */ + 1, /* ignore_my_client_config */ +}; + +#define ROUNDUP(len) (((len) + 3) & ~3) + +unsigned char buf[512]; + +#define GET_16BE(off) ((buf[off] << 8) + (buf[(off)+1])) +#define GET_32BE(off) ((GET_16BE(off) << 16) + GET_16BE((off)+2)) + +#define PUT_16BE(off, v) (buf[off] = ((v) >> 8) & 0xff, \ + buf[(off) + 1] = (v) & 0xff) +#define PUT_32BE(off, v) (PUT_16BE((off), (v) >> 16), \ + PUT_16BE((off) + 2, (v))) + +/* Structure of an ELF file */ +#define E_IDENT 0 /* ELF header */ +#define E_PHOFF 28 +#define E_PHENTSIZE 42 +#define E_PHNUM 44 +#define E_HSIZE 52 /* size of ELF header */ + +#define EI_MAGIC 0 /* offsets in E_IDENT area */ +#define EI_CLASS 4 +#define EI_DATA 5 + +#define PH_TYPE 0 /* ELF program header */ +#define PH_OFFSET 4 +#define PH_FILESZ 16 +#define PH_HSIZE 32 /* size of program header */ + +#define PT_NOTE 4 /* Program header type = note */ + +#define ELFCLASS32 1 +#define ELFDATA2MSB 2 + +unsigned char elf_magic[4] = { 0x7f, 'E', 'L', 'F' }; + +int +main(int ac, char **av) +{ + int fd, n, i; + int ph, ps, np; + int nnote, nnote2, ns; + + if (ac != 2) { + fprintf(stderr, "Usage: %s elf-file\n", av[0]); + exit(1); + } + fd = open(av[1], O_RDWR); + if (fd < 0) { + perror(av[1]); + exit(1); + } + + nnote = 12 + ROUNDUP(strlen(arch) + 1) + sizeof(descr); + nnote2 = 12 + ROUNDUP(strlen(rpaname) + 1) + sizeof(rpanote); + + n = read(fd, buf, sizeof(buf)); + if (n < 0) { + perror("read"); + exit(1); + } + + if (n < E_HSIZE || memcmp(&buf[E_IDENT+EI_MAGIC], elf_magic, 4) != 0) + goto notelf; + + if (buf[E_IDENT+EI_CLASS] != ELFCLASS32 + || buf[E_IDENT+EI_DATA] != ELFDATA2MSB) { + fprintf(stderr, "%s is not a big-endian 32-bit ELF image\n", + av[1]); + exit(1); + } + + ph = GET_32BE(E_PHOFF); + ps = GET_16BE(E_PHENTSIZE); + np = GET_16BE(E_PHNUM); + if (ph < E_HSIZE || ps < PH_HSIZE || np < 1) + goto notelf; + if (ph + (np + 2) * ps + nnote + nnote2 > n) + goto nospace; + + for (i = 0; i < np; ++i) { + if (GET_32BE(ph + PH_TYPE) == PT_NOTE) { + fprintf(stderr, "%s already has a note entry\n", + av[1]); + exit(0); + } + ph += ps; + } + + /* XXX check that the area we want to use is all zeroes */ + for (i = 0; i < 2 * ps + nnote + nnote2; ++i) + if (buf[ph + i] != 0) + goto nospace; + + /* fill in the program header entry */ + ns = ph + 2 * ps; + PUT_32BE(ph + PH_TYPE, PT_NOTE); + PUT_32BE(ph + PH_OFFSET, ns); + PUT_32BE(ph + PH_FILESZ, nnote); + + /* fill in the note area we point to */ + /* XXX we should probably make this a proper section */ + PUT_32BE(ns, strlen(arch) + 1); + PUT_32BE(ns + 4, N_DESCR * 4); + PUT_32BE(ns + 8, 0x1275); + strcpy((char *) &buf[ns + 12], arch); + ns += 12 + strlen(arch) + 1; + for (i = 0; i < N_DESCR; ++i, ns += 4) + PUT_32BE(ns, descr[i]); + + /* fill in the second program header entry and the RPA note area */ + ph += ps; + PUT_32BE(ph + PH_TYPE, PT_NOTE); + PUT_32BE(ph + PH_OFFSET, ns); + PUT_32BE(ph + PH_FILESZ, nnote2); + + /* fill in the note area we point to */ + PUT_32BE(ns, strlen(rpaname) + 1); + PUT_32BE(ns + 4, sizeof(rpanote)); + PUT_32BE(ns + 8, 0x12759999); + strcpy((char *) &buf[ns + 12], rpaname); + ns += 12 + ROUNDUP(strlen(rpaname) + 1); + for (i = 0; i < N_RPA_DESCR; ++i, ns += 4) + PUT_32BE(ns, rpanote[i]); + + /* Update the number of program headers */ + PUT_16BE(E_PHNUM, np + 2); + + /* write back */ + lseek(fd, (long) 0, SEEK_SET); + i = write(fd, buf, n); + if (i < 0) { + perror("write"); + exit(1); + } + if (i < n) { + fprintf(stderr, "%s: write truncated\n", av[1]); + exit(1); + } + + exit(0); + + notelf: + fprintf(stderr, "%s does not appear to be an ELF file\n", av[1]); + exit(1); + + nospace: + fprintf(stderr, "sorry, I can't find space in %s to put the note\n", + av[1]); + exit(1); +} diff --git a/arch/powerpc/boot/crt0.S b/arch/powerpc/boot/crt0.S new file mode 100644 index 00000000000..9cc44226393 --- /dev/null +++ b/arch/powerpc/boot/crt0.S @@ -0,0 +1,59 @@ +/* + * Copyright (C) Paul Mackerras 1997. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * NOTE: this code runs in 32 bit mode and is packaged as ELF32. + */ + +#include "ppc_asm.h" + + .text + .globl _zimage_start +_zimage_start: + bl reloc_offset + +reloc_offset: + mflr r0 + lis r9,reloc_offset@ha + addi r9,r9,reloc_offset@l + subf. r0,r9,r0 + beq clear_caches + +reloc_got2: + lis r9,__got2_start@ha + addi r9,r9,__got2_start@l + lis r8,__got2_end@ha + addi r8,r8,__got2_end@l + subf. r8,r9,r8 + beq clear_caches + srwi. r8,r8,2 + mtctr r8 + add r9,r0,r9 +reloc_got2_loop: + lwz r8,0(r9) + add r8,r8,r0 + stw r8,0(r9) + addi r9,r9,4 + bdnz reloc_got2_loop + +clear_caches: + lis r9,_start@h + add r9,r0,r9 + lis r8,_etext@ha + addi r8,r8,_etext@l + add r8,r0,r8 +1: dcbf r0,r9 + icbi r0,r9 + addi r9,r9,0x20 + cmplwi 0,r9,8 + blt 1b + sync + isync + + mr r6,r1 + b start + diff --git a/arch/powerpc/boot/div64.S b/arch/powerpc/boot/div64.S new file mode 100644 index 00000000000..722f360a32a --- /dev/null +++ b/arch/powerpc/boot/div64.S @@ -0,0 +1,58 @@ +/* + * Divide a 64-bit unsigned number by a 32-bit unsigned number. + * This routine assumes that the top 32 bits of the dividend are + * non-zero to start with. + * On entry, r3 points to the dividend, which get overwritten with + * the 64-bit quotient, and r4 contains the divisor. + * On exit, r3 contains the remainder. + * + * Copyright (C) 2002 Paul Mackerras, IBM Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include "ppc_asm.h" + + .globl __div64_32 +__div64_32: + lwz r5,0(r3) # get the dividend into r5/r6 + lwz r6,4(r3) + cmplw r5,r4 + li r7,0 + li r8,0 + blt 1f + divwu r7,r5,r4 # if dividend.hi >= divisor, + mullw r0,r7,r4 # quotient.hi = dividend.hi / divisor + subf. r5,r0,r5 # dividend.hi %= divisor + beq 3f +1: mr r11,r5 # here dividend.hi != 0 + andis. r0,r5,0xc000 + bne 2f + cntlzw r0,r5 # we are shifting the dividend right + li r10,-1 # to make it < 2^32, and shifting + srw r10,r10,r0 # the divisor right the same amount, + add r9,r4,r10 # rounding up (so the estimate cannot + andc r11,r6,r10 # ever be too large, only too small) + andc r9,r9,r10 + or r11,r5,r11 + rotlw r9,r9,r0 + rotlw r11,r11,r0 + divwu r11,r11,r9 # then we divide the shifted quantities +2: mullw r10,r11,r4 # to get an estimate of the quotient, + mulhwu r9,r11,r4 # multiply the estimate by the divisor, + subfc r6,r10,r6 # take the product from the divisor, + add r8,r8,r11 # and add the estimate to the accumulated + subfe. r5,r9,r5 # quotient + bne 1b +3: cmplw r6,r4 + blt 4f + divwu r0,r6,r4 # perform the remaining 32-bit division + mullw r10,r0,r4 # and get the remainder + add r8,r8,r0 + subf r6,r10,r6 +4: stw r7,0(r3) # return the quotient in *r3 + stw r8,4(r3) + mr r3,r6 # return the remainder in r3 + blr diff --git a/arch/powerpc/boot/elf.h b/arch/powerpc/boot/elf.h new file mode 100644 index 00000000000..d4828fcf1cb --- /dev/null +++ b/arch/powerpc/boot/elf.h @@ -0,0 +1,149 @@ +#ifndef _PPC_BOOT_ELF_H_ +#define _PPC_BOOT_ELF_H_ + +/* 32-bit ELF base types. */ +typedef unsigned int Elf32_Addr; +typedef unsigned short Elf32_Half; +typedef unsigned int Elf32_Off; +typedef signed int Elf32_Sword; +typedef unsigned int Elf32_Word; + +/* 64-bit ELF base types. */ +typedef unsigned long long Elf64_Addr; +typedef unsigned short Elf64_Half; +typedef signed short Elf64_SHalf; +typedef unsigned long long Elf64_Off; +typedef signed int Elf64_Sword; +typedef unsigned int Elf64_Word; +typedef unsigned long long Elf64_Xword; +typedef signed long long Elf64_Sxword; + +/* These constants are for the segment types stored in the image headers */ +#define PT_NULL 0 +#define PT_LOAD 1 +#define PT_DYNAMIC 2 +#define PT_INTERP 3 +#define PT_NOTE 4 +#define PT_SHLIB 5 +#define PT_PHDR 6 +#define PT_TLS 7 /* Thread local storage segment */ +#define PT_LOOS 0x60000000 /* OS-specific */ +#define PT_HIOS 0x6fffffff /* OS-specific */ +#define PT_LOPROC 0x70000000 +#define PT_HIPROC 0x7fffffff +#define PT_GNU_EH_FRAME 0x6474e550 + +#define PT_GNU_STACK (PT_LOOS + 0x474e551) + +/* These constants define the different elf file types */ +#define ET_NONE 0 +#define ET_REL 1 +#define ET_EXEC 2 +#define ET_DYN 3 +#define ET_CORE 4 +#define ET_LOPROC 0xff00 +#define ET_HIPROC 0xffff + +/* These constants define the various ELF target machines */ +#define EM_NONE 0 +#define EM_PPC 20 /* PowerPC */ +#define EM_PPC64 21 /* PowerPC64 */ + +#define EI_NIDENT 16 + +typedef struct elf32_hdr { + unsigned char e_ident[EI_NIDENT]; + Elf32_Half e_type; + Elf32_Half e_machine; + Elf32_Word e_version; + Elf32_Addr e_entry; /* Entry point */ + Elf32_Off e_phoff; + Elf32_Off e_shoff; + Elf32_Word e_flags; + Elf32_Half e_ehsize; + Elf32_Half e_phentsize; + Elf32_Half e_phnum; + Elf32_Half e_shentsize; + Elf32_Half e_shnum; + Elf32_Half e_shstrndx; +} Elf32_Ehdr; + +typedef struct elf64_hdr { + unsigned char e_ident[16]; /* ELF "magic number" */ + Elf64_Half e_type; + Elf64_Half e_machine; + Elf64_Word e_version; + Elf64_Addr e_entry; /* Entry point virtual address */ + Elf64_Off e_phoff; /* Program header table file offset */ + Elf64_Off e_shoff; /* Section header table file offset */ + Elf64_Word e_flags; + Elf64_Half e_ehsize; + Elf64_Half e_phentsize; + Elf64_Half e_phnum; + Elf64_Half e_shentsize; + Elf64_Half e_shnum; + Elf64_Half e_shstrndx; +} Elf64_Ehdr; + +/* These constants define the permissions on sections in the program + header, p_flags. */ +#define PF_R 0x4 +#define PF_W 0x2 +#define PF_X 0x1 + +typedef struct elf32_phdr { + Elf32_Word p_type; + Elf32_Off p_offset; + Elf32_Addr p_vaddr; + Elf32_Addr p_paddr; + Elf32_Word p_filesz; + Elf32_Word p_memsz; + Elf32_Word p_flags; + Elf32_Word p_align; +} Elf32_Phdr; + +typedef struct elf64_phdr { + Elf64_Word p_type; + Elf64_Word p_flags; + Elf64_Off p_offset; /* Segment file offset */ + Elf64_Addr p_vaddr; /* Segment virtual address */ + Elf64_Addr p_paddr; /* Segment physical address */ + Elf64_Xword p_filesz; /* Segment size in file */ + Elf64_Xword p_memsz; /* Segment size in memory */ + Elf64_Xword p_align; /* Segment alignment, file & memory */ +} Elf64_Phdr; + +#define EI_MAG0 0 /* e_ident[] indexes */ +#define EI_MAG1 1 +#define EI_MAG2 2 +#define EI_MAG3 3 +#define EI_CLASS 4 +#define EI_DATA 5 +#define EI_VERSION 6 +#define EI_OSABI 7 +#define EI_PAD 8 + +#define ELFMAG0 0x7f /* EI_MAG */ +#define ELFMAG1 'E' +#define ELFMAG2 'L' +#define ELFMAG3 'F' +#define ELFMAG "\177ELF" +#define SELFMAG 4 + +#define ELFCLASSNONE 0 /* EI_CLASS */ +#define ELFCLASS32 1 +#define ELFCLASS64 2 +#define ELFCLASSNUM 3 + +#define ELFDATANONE 0 /* e_ident[EI_DATA] */ +#define ELFDATA2LSB 1 +#define ELFDATA2MSB 2 + +#define EV_NONE 0 /* e_version, EI_VERSION */ +#define EV_CURRENT 1 +#define EV_NUM 2 + +#define ELFOSABI_NONE 0 +#define ELFOSABI_LINUX 3 + +#endif /* _PPC_BOOT_ELF_H_ */ diff --git a/arch/powerpc/boot/install.sh b/arch/powerpc/boot/install.sh new file mode 100644 index 00000000000..eacce959081 --- /dev/null +++ b/arch/powerpc/boot/install.sh @@ -0,0 +1,42 @@ +#!/bin/sh +# +# arch/ppc64/boot/install.sh +# +# This file is subject to the terms and conditions of the GNU General Public +# License. See the file "COPYING" in the main directory of this archive +# for more details. +# +# Copyright (C) 1995 by Linus Torvalds +# +# Blatantly stolen from in arch/i386/boot/install.sh by Dave Hansen +# +# "make install" script for ppc64 architecture +# +# Arguments: +# $1 - kernel version +# $2 - kernel image file +# $3 - kernel map file +# $4 - default install path (blank if root directory) +# $5 - kernel boot file, the zImage +# + +# User may have a custom install script + +if [ -x ~/bin/${CROSS_COMPILE}installkernel ]; then exec ~/bin/${CROSS_COMPILE}installkernel "$@"; fi +if [ -x /sbin/${CROSS_COMPILE}installkernel ]; then exec /sbin/${CROSS_COMPILE}installkernel "$@"; fi + +# Default install + +# this should work for both the pSeries zImage and the iSeries vmlinux.sm +image_name=`basename $2` + +if [ -f $4/$image_name ]; then + mv $4/$image_name $4/$image_name.old +fi + +if [ -f $4/System.map ]; then + mv $4/System.map $4/System.old +fi + +cat $2 > $4/$image_name +cp $3 $4/System.map diff --git a/arch/powerpc/boot/main.c b/arch/powerpc/boot/main.c new file mode 100644 index 00000000000..64ec93116fa --- /dev/null +++ b/arch/powerpc/boot/main.c @@ -0,0 +1,321 @@ +/* + * Copyright (C) Paul Mackerras 1997. + * + * Updates for PPC64 by Todd Inglett, Dave Engebretsen & Peter Bergner. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include +#include +#include "elf.h" +#include "page.h" +#include "string.h" +#include "stdio.h" +#include "prom.h" +#include "zlib.h" + +extern void flush_cache(void *, unsigned long); + + +/* Value picked to match that used by yaboot */ +#define PROG_START 0x01400000 +#define RAM_END (512<<20) // Fixme: use OF */ +#define ONE_MB 0x100000 + +extern char _start[]; +extern char __bss_start[]; +extern char _end[]; +extern char _vmlinux_start[]; +extern char _vmlinux_end[]; +extern char _initrd_start[]; +extern char _initrd_end[]; + +struct addr_range { + unsigned long addr; + unsigned long size; + unsigned long memsize; +}; +static struct addr_range vmlinux; +static struct addr_range vmlinuz; +static struct addr_range initrd; + +static unsigned long elfoffset; + +static char scratch[46912]; /* scratch space for gunzip, from zlib_inflate_workspacesize() */ +static char elfheader[256]; + + +typedef void (*kernel_entry_t)( unsigned long, + unsigned long, + void *, + void *); + + +#undef DEBUG + +static unsigned long claim_base; + +#define HEAD_CRC 2 +#define EXTRA_FIELD 4 +#define ORIG_NAME 8 +#define COMMENT 0x10 +#define RESERVED 0xe0 + +static void gunzip(void *dst, int dstlen, unsigned char *src, int *lenp) +{ + z_stream s; + int r, i, flags; + + /* skip header */ + i = 10; + flags = src[3]; + if (src[2] != Z_DEFLATED || (flags & RESERVED) != 0) { + printf("bad gzipped data\n\r"); + exit(); + } + if ((flags & EXTRA_FIELD) != 0) + i = 12 + src[10] + (src[11] << 8); + if ((flags & ORIG_NAME) != 0) + while (src[i++] != 0) + ; + if ((flags & COMMENT) != 0) + while (src[i++] != 0) + ; + if ((flags & HEAD_CRC) != 0) + i += 2; + if (i >= *lenp) { + printf("gunzip: ran out of data in header\n\r"); + exit(); + } + + if (zlib_inflate_workspacesize() > sizeof(scratch)) { + printf("gunzip needs more mem\n"); + exit(); + } + memset(&s, 0, sizeof(s)); + s.workspace = scratch; + r = zlib_inflateInit2(&s, -MAX_WBITS); + if (r != Z_OK) { + printf("inflateInit2 returned %d\n\r", r); + exit(); + } + s.next_in = src + i; + s.avail_in = *lenp - i; + s.next_out = dst; + s.avail_out = dstlen; + r = zlib_inflate(&s, Z_FULL_FLUSH); + if (r != Z_OK && r != Z_STREAM_END) { + printf("inflate returned %d msg: %s\n\r", r, s.msg); + exit(); + } + *lenp = s.next_out - (unsigned char *) dst; + zlib_inflateEnd(&s); +} + +static unsigned long try_claim(unsigned long size) +{ + unsigned long addr = 0; + + for(; claim_base < RAM_END; claim_base += ONE_MB) { +#ifdef DEBUG + printf(" trying: 0x%08lx\n\r", claim_base); +#endif + addr = (unsigned long)claim(claim_base, size, 0); + if ((void *)addr != (void *)-1) + break; + } + if (addr == 0) + return 0; + claim_base = PAGE_ALIGN(claim_base + size); + return addr; +} + +static int is_elf64(void *hdr) +{ + Elf64_Ehdr *elf64 = hdr; + Elf64_Phdr *elf64ph; + unsigned int i; + + if (!(elf64->e_ident[EI_MAG0] == ELFMAG0 && + elf64->e_ident[EI_MAG1] == ELFMAG1 && + elf64->e_ident[EI_MAG2] == ELFMAG2 && + elf64->e_ident[EI_MAG3] == ELFMAG3 && + elf64->e_ident[EI_CLASS] == ELFCLASS64 && + elf64->e_ident[EI_DATA] == ELFDATA2MSB && + elf64->e_type == ET_EXEC && + elf64->e_machine == EM_PPC64)) + return 0; + + elf64ph = (Elf64_Phdr *)((unsigned long)elf64 + + (unsigned long)elf64->e_phoff); + for (i = 0; i < (unsigned int)elf64->e_phnum; i++, elf64ph++) + if (elf64ph->p_type == PT_LOAD && elf64ph->p_offset != 0) + break; + if (i >= (unsigned int)elf64->e_phnum) + return 0; + + elfoffset = (unsigned long)elf64ph->p_offset; + vmlinux.size = (unsigned long)elf64ph->p_filesz + elfoffset; + vmlinux.memsize = (unsigned long)elf64ph->p_memsz + elfoffset; + return 1; +} + +static int is_elf32(void *hdr) +{ + Elf32_Ehdr *elf32 = hdr; + Elf32_Phdr *elf32ph; + unsigned int i; + + if (!(elf32->e_ident[EI_MAG0] == ELFMAG0 && + elf32->e_ident[EI_MAG1] == ELFMAG1 && + elf32->e_ident[EI_MAG2] == ELFMAG2 && + elf32->e_ident[EI_MAG3] == ELFMAG3 && + elf32->e_ident[EI_CLASS] == ELFCLASS32 && + elf32->e_ident[EI_DATA] == ELFDATA2MSB && + elf32->e_type == ET_EXEC && + elf32->e_machine == EM_PPC)) + return 0; + + elf32 = (Elf32_Ehdr *)elfheader; + elf32ph = (Elf32_Phdr *) ((unsigned long)elf32 + elf32->e_phoff); + for (i = 0; i < elf32->e_phnum; i++, elf32ph++) + if (elf32ph->p_type == PT_LOAD && elf32ph->p_offset != 0) + break; + if (i >= elf32->e_phnum) + return 0; + + elfoffset = elf32ph->p_offset; + vmlinux.size = elf32ph->p_filesz + elf32ph->p_offset; + vmlinux.memsize = elf32ph->p_memsz + elf32ph->p_offset; + return 1; +} + +void start(unsigned long a1, unsigned long a2, void *promptr, void *sp) +{ + int len; + kernel_entry_t kernel_entry; + + memset(__bss_start, 0, _end - __bss_start); + + prom = (int (*)(void *)) promptr; + chosen_handle = finddevice("/chosen"); + if (chosen_handle == (void *) -1) + exit(); + if (getprop(chosen_handle, "stdout", &stdout, sizeof(stdout)) != 4) + exit(); + stderr = stdout; + if (getprop(chosen_handle, "stdin", &stdin, sizeof(stdin)) != 4) + exit(); + + printf("\n\rzImage starting: loaded at 0x%p (sp: 0x%p)\n\r", _start, sp); + + vmlinuz.addr = (unsigned long)_vmlinux_start; + vmlinuz.size = (unsigned long)(_vmlinux_end - _vmlinux_start); + + /* gunzip the ELF header of the kernel */ + if (*(unsigned short *)vmlinuz.addr == 0x1f8b) { + len = vmlinuz.size; + gunzip(elfheader, sizeof(elfheader), + (unsigned char *)vmlinuz.addr, &len); + } else + memcpy(elfheader, (const void *)vmlinuz.addr, sizeof(elfheader)); + + if (!is_elf64(elfheader) && !is_elf32(elfheader)) { + printf("Error: not a valid PPC32 or PPC64 ELF file!\n\r"); + exit(); + } + + /* + * The first available claim_base must be above the end of the + * the loaded kernel wrapper file (_start to _end includes the + * initrd image if it is present) and rounded up to a nice + * 1 MB boundary for good measure. + */ + + claim_base = _ALIGN_UP((unsigned long)_end, ONE_MB); + +#if defined(PROG_START) + /* + * Maintain a "magic" minimum address. This keeps some older + * firmware platforms running. + */ + + if (claim_base < PROG_START) + claim_base = PROG_START; +#endif + + /* We need to claim the memsize plus the file offset since gzip + * will expand the header (file offset), then the kernel, then + * possible rubbish we don't care about. But the kernel bss must + * be claimed (it will be zero'd by the kernel itself) + */ + printf("Allocating 0x%lx bytes for kernel ...\n\r", vmlinux.memsize); + vmlinux.addr = try_claim(vmlinux.memsize); + if (vmlinux.addr == 0) { + printf("Can't allocate memory for kernel image !\n\r"); + exit(); + } + + /* + * Now we try to claim memory for the initrd (and copy it there) + */ + initrd.size = (unsigned long)(_initrd_end - _initrd_start); + initrd.memsize = initrd.size; + if ( initrd.size > 0 ) { + printf("Allocating 0x%lx bytes for initrd ...\n\r", initrd.size); + initrd.addr = try_claim(initrd.size); + if (initrd.addr == 0) { + printf("Can't allocate memory for initial ramdisk !\n\r"); + exit(); + } + a1 = initrd.addr; + a2 = initrd.size; + printf("initial ramdisk moving 0x%lx <- 0x%lx (0x%lx bytes)\n\r", + initrd.addr, (unsigned long)_initrd_start, initrd.size); + memmove((void *)initrd.addr, (void *)_initrd_start, initrd.size); + printf("initrd head: 0x%lx\n\r", *((unsigned long *)initrd.addr)); + } + + /* Eventually gunzip the kernel */ + if (*(unsigned short *)vmlinuz.addr == 0x1f8b) { + printf("gunzipping (0x%lx <- 0x%lx:0x%0lx)...", + vmlinux.addr, vmlinuz.addr, vmlinuz.addr+vmlinuz.size); + len = vmlinuz.size; + gunzip((void *)vmlinux.addr, vmlinux.memsize, + (unsigned char *)vmlinuz.addr, &len); + printf("done 0x%lx bytes\n\r", len); + } else { + memmove((void *)vmlinux.addr,(void *)vmlinuz.addr,vmlinuz.size); + } + + /* Skip over the ELF header */ +#ifdef DEBUG + printf("... skipping 0x%lx bytes of ELF header\n\r", + elfoffset); +#endif + vmlinux.addr += elfoffset; + + flush_cache((void *)vmlinux.addr, vmlinux.size); + + kernel_entry = (kernel_entry_t)vmlinux.addr; +#ifdef DEBUG + printf( "kernel:\n\r" + " entry addr = 0x%lx\n\r" + " a1 = 0x%lx,\n\r" + " a2 = 0x%lx,\n\r" + " prom = 0x%lx,\n\r" + " bi_recs = 0x%lx,\n\r", + (unsigned long)kernel_entry, a1, a2, + (unsigned long)prom, NULL); +#endif + + kernel_entry(a1, a2, prom, NULL); + + printf("Error: Linux kernel returned to zImage bootloader!\n\r"); + + exit(); +} + diff --git a/arch/powerpc/boot/page.h b/arch/powerpc/boot/page.h new file mode 100644 index 00000000000..14eca30fef6 --- /dev/null +++ b/arch/powerpc/boot/page.h @@ -0,0 +1,34 @@ +#ifndef _PPC_BOOT_PAGE_H +#define _PPC_BOOT_PAGE_H +/* + * Copyright (C) 2001 PPC64 Team, IBM Corp + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifdef __ASSEMBLY__ +#define ASM_CONST(x) x +#else +#define __ASM_CONST(x) x##UL +#define ASM_CONST(x) __ASM_CONST(x) +#endif + +/* PAGE_SHIFT determines the page size */ +#define PAGE_SHIFT 12 +#define PAGE_SIZE (ASM_CONST(1) << PAGE_SHIFT) +#define PAGE_MASK (~(PAGE_SIZE-1)) + +/* align addr on a size boundary - adjust address up/down if needed */ +#define _ALIGN_UP(addr,size) (((addr)+((size)-1))&(~((size)-1))) +#define _ALIGN_DOWN(addr,size) ((addr)&(~((size)-1))) + +/* align addr on a size boundary - adjust address up if needed */ +#define _ALIGN(addr,size) _ALIGN_UP(addr,size) + +/* to align the pointer to the (next) page boundary */ +#define PAGE_ALIGN(addr) _ALIGN(addr, PAGE_SIZE) + +#endif /* _PPC_BOOT_PAGE_H */ diff --git a/arch/powerpc/boot/ppc_asm.h b/arch/powerpc/boot/ppc_asm.h new file mode 100644 index 00000000000..1c2c2817f9b --- /dev/null +++ b/arch/powerpc/boot/ppc_asm.h @@ -0,0 +1,62 @@ +#ifndef _PPC64_PPC_ASM_H +#define _PPC64_PPC_ASM_H +/* + * + * Definitions used by various bits of low-level assembly code on PowerPC. + * + * Copyright (C) 1995-1999 Gary Thomas, Paul Mackerras, Cort Dougan. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +/* Condition Register Bit Fields */ + +#define cr0 0 +#define cr1 1 +#define cr2 2 +#define cr3 3 +#define cr4 4 +#define cr5 5 +#define cr6 6 +#define cr7 7 + + +/* General Purpose Registers (GPRs) */ + +#define r0 0 +#define r1 1 +#define r2 2 +#define r3 3 +#define r4 4 +#define r5 5 +#define r6 6 +#define r7 7 +#define r8 8 +#define r9 9 +#define r10 10 +#define r11 11 +#define r12 12 +#define r13 13 +#define r14 14 +#define r15 15 +#define r16 16 +#define r17 17 +#define r18 18 +#define r19 19 +#define r20 20 +#define r21 21 +#define r22 22 +#define r23 23 +#define r24 24 +#define r25 25 +#define r26 26 +#define r27 27 +#define r28 28 +#define r29 29 +#define r30 30 +#define r31 31 + +#endif /* _PPC64_PPC_ASM_H */ diff --git a/arch/powerpc/boot/prom.c b/arch/powerpc/boot/prom.c new file mode 100644 index 00000000000..4bea2f4dcb0 --- /dev/null +++ b/arch/powerpc/boot/prom.c @@ -0,0 +1,499 @@ +/* + * Copyright (C) Paul Mackerras 1997. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include +#include +#include "string.h" +#include "stdio.h" +#include "prom.h" + +int (*prom)(void *); + +void *chosen_handle; + +void *stdin; +void *stdout; +void *stderr; + + +int +write(void *handle, void *ptr, int nb) +{ + struct prom_args { + char *service; + int nargs; + int nret; + void *ihandle; + void *addr; + int len; + int actual; + } args; + + args.service = "write"; + args.nargs = 3; + args.nret = 1; + args.ihandle = handle; + args.addr = ptr; + args.len = nb; + args.actual = -1; + (*prom)(&args); + return args.actual; +} + +int +read(void *handle, void *ptr, int nb) +{ + struct prom_args { + char *service; + int nargs; + int nret; + void *ihandle; + void *addr; + int len; + int actual; + } args; + + args.service = "read"; + args.nargs = 3; + args.nret = 1; + args.ihandle = handle; + args.addr = ptr; + args.len = nb; + args.actual = -1; + (*prom)(&args); + return args.actual; +} + +void +exit() +{ + struct prom_args { + char *service; + } args; + + for (;;) { + args.service = "exit"; + (*prom)(&args); + } +} + +void +pause(void) +{ + struct prom_args { + char *service; + } args; + + args.service = "enter"; + (*prom)(&args); +} + +void * +finddevice(const char *name) +{ + struct prom_args { + char *service; + int nargs; + int nret; + const char *devspec; + void *phandle; + } args; + + args.service = "finddevice"; + args.nargs = 1; + args.nret = 1; + args.devspec = name; + args.phandle = (void *) -1; + (*prom)(&args); + return args.phandle; +} + +void * +claim(unsigned long virt, unsigned long size, unsigned long align) +{ + struct prom_args { + char *service; + int nargs; + int nret; + unsigned int virt; + unsigned int size; + unsigned int align; + void *ret; + } args; + + args.service = "claim"; + args.nargs = 3; + args.nret = 1; + args.virt = virt; + args.size = size; + args.align = align; + (*prom)(&args); + return args.ret; +} + +int +getprop(void *phandle, const char *name, void *buf, int buflen) +{ + struct prom_args { + char *service; + int nargs; + int nret; + void *phandle; + const char *name; + void *buf; + int buflen; + int size; + } args; + + args.service = "getprop"; + args.nargs = 4; + args.nret = 1; + args.phandle = phandle; + args.name = name; + args.buf = buf; + args.buflen = buflen; + args.size = -1; + (*prom)(&args); + return args.size; +} + +int +putc(int c, void *f) +{ + char ch = c; + + if (c == '\n') + putc('\r', f); + return write(f, &ch, 1) == 1? c: -1; +} + +int +putchar(int c) +{ + return putc(c, stdout); +} + +int +fputs(char *str, void *f) +{ + int n = strlen(str); + + return write(f, str, n) == n? 0: -1; +} + +size_t strnlen(const char * s, size_t count) +{ + const char *sc; + + for (sc = s; count-- && *sc != '\0'; ++sc) + /* nothing */; + return sc - s; +} + +extern unsigned int __div64_32(unsigned long long *dividend, + unsigned int divisor); + +/* The unnecessary pointer compare is there + * to check for type safety (n must be 64bit) + */ +# define do_div(n,base) ({ \ + unsigned int __base = (base); \ + unsigned int __rem; \ + (void)(((typeof((n)) *)0) == ((unsigned long long *)0)); \ + if (((n) >> 32) == 0) { \ + __rem = (unsigned int)(n) % __base; \ + (n) = (unsigned int)(n) / __base; \ + } else \ + __rem = __div64_32(&(n), __base); \ + __rem; \ + }) + +static int skip_atoi(const char **s) +{ + int i, c; + + for (i = 0; '0' <= (c = **s) && c <= '9'; ++*s) + i = i*10 + c - '0'; + return i; +} + +#define ZEROPAD 1 /* pad with zero */ +#define SIGN 2 /* unsigned/signed long */ +#define PLUS 4 /* show plus */ +#define SPACE 8 /* space if plus */ +#define LEFT 16 /* left justified */ +#define SPECIAL 32 /* 0x */ +#define LARGE 64 /* use 'ABCDEF' instead of 'abcdef' */ + +static char * number(char * str, unsigned long long num, int base, int size, int precision, int type) +{ + char c,sign,tmp[66]; + const char *digits="0123456789abcdefghijklmnopqrstuvwxyz"; + int i; + + if (type & LARGE) + digits = "0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ"; + if (type & LEFT) + type &= ~ZEROPAD; + if (base < 2 || base > 36) + return 0; + c = (type & ZEROPAD) ? '0' : ' '; + sign = 0; + if (type & SIGN) { + if ((signed long long)num < 0) { + sign = '-'; + num = - (signed long long)num; + size--; + } else if (type & PLUS) { + sign = '+'; + size--; + } else if (type & SPACE) { + sign = ' '; + size--; + } + } + if (type & SPECIAL) { + if (base == 16) + size -= 2; + else if (base == 8) + size--; + } + i = 0; + if (num == 0) + tmp[i++]='0'; + else while (num != 0) { + tmp[i++] = digits[do_div(num, base)]; + } + if (i > precision) + precision = i; + size -= precision; + if (!(type&(ZEROPAD+LEFT))) + while(size-->0) + *str++ = ' '; + if (sign) + *str++ = sign; + if (type & SPECIAL) { + if (base==8) + *str++ = '0'; + else if (base==16) { + *str++ = '0'; + *str++ = digits[33]; + } + } + if (!(type & LEFT)) + while (size-- > 0) + *str++ = c; + while (i < precision--) + *str++ = '0'; + while (i-- > 0) + *str++ = tmp[i]; + while (size-- > 0) + *str++ = ' '; + return str; +} + +int vsprintf(char *buf, const char *fmt, va_list args) +{ + int len; + unsigned long long num; + int i, base; + char * str; + const char *s; + + int flags; /* flags to number() */ + + int field_width; /* width of output field */ + int precision; /* min. # of digits for integers; max + number of chars for from string */ + int qualifier; /* 'h', 'l', or 'L' for integer fields */ + /* 'z' support added 23/7/1999 S.H. */ + /* 'z' changed to 'Z' --davidm 1/25/99 */ + + + for (str=buf ; *fmt ; ++fmt) { + if (*fmt != '%') { + *str++ = *fmt; + continue; + } + + /* process flags */ + flags = 0; + repeat: + ++fmt; /* this also skips first '%' */ + switch (*fmt) { + case '-': flags |= LEFT; goto repeat; + case '+': flags |= PLUS; goto repeat; + case ' ': flags |= SPACE; goto repeat; + case '#': flags |= SPECIAL; goto repeat; + case '0': flags |= ZEROPAD; goto repeat; + } + + /* get field width */ + field_width = -1; + if ('0' <= *fmt && *fmt <= '9') + field_width = skip_atoi(&fmt); + else if (*fmt == '*') { + ++fmt; + /* it's the next argument */ + field_width = va_arg(args, int); + if (field_width < 0) { + field_width = -field_width; + flags |= LEFT; + } + } + + /* get the precision */ + precision = -1; + if (*fmt == '.') { + ++fmt; + if ('0' <= *fmt && *fmt <= '9') + precision = skip_atoi(&fmt); + else if (*fmt == '*') { + ++fmt; + /* it's the next argument */ + precision = va_arg(args, int); + } + if (precision < 0) + precision = 0; + } + + /* get the conversion qualifier */ + qualifier = -1; + if (*fmt == 'h' || *fmt == 'l' || *fmt == 'L' || *fmt =='Z') { + qualifier = *fmt; + ++fmt; + } + + /* default base */ + base = 10; + + switch (*fmt) { + case 'c': + if (!(flags & LEFT)) + while (--field_width > 0) + *str++ = ' '; + *str++ = (unsigned char) va_arg(args, int); + while (--field_width > 0) + *str++ = ' '; + continue; + + case 's': + s = va_arg(args, char *); + if (!s) + s = ""; + + len = strnlen(s, precision); + + if (!(flags & LEFT)) + while (len < field_width--) + *str++ = ' '; + for (i = 0; i < len; ++i) + *str++ = *s++; + while (len < field_width--) + *str++ = ' '; + continue; + + case 'p': + if (field_width == -1) { + field_width = 2*sizeof(void *); + flags |= ZEROPAD; + } + str = number(str, + (unsigned long) va_arg(args, void *), 16, + field_width, precision, flags); + continue; + + + case 'n': + if (qualifier == 'l') { + long * ip = va_arg(args, long *); + *ip = (str - buf); + } else if (qualifier == 'Z') { + size_t * ip = va_arg(args, size_t *); + *ip = (str - buf); + } else { + int * ip = va_arg(args, int *); + *ip = (str - buf); + } + continue; + + case '%': + *str++ = '%'; + continue; + + /* integer number formats - set up the flags and "break" */ + case 'o': + base = 8; + break; + + case 'X': + flags |= LARGE; + case 'x': + base = 16; + break; + + case 'd': + case 'i': + flags |= SIGN; + case 'u': + break; + + default: + *str++ = '%'; + if (*fmt) + *str++ = *fmt; + else + --fmt; + continue; + } + if (qualifier == 'l') { + num = va_arg(args, unsigned long); + if (flags & SIGN) + num = (signed long) num; + } else if (qualifier == 'Z') { + num = va_arg(args, size_t); + } else if (qualifier == 'h') { + num = (unsigned short) va_arg(args, int); + if (flags & SIGN) + num = (signed short) num; + } else { + num = va_arg(args, unsigned int); + if (flags & SIGN) + num = (signed int) num; + } + str = number(str, num, base, field_width, precision, flags); + } + *str = '\0'; + return str-buf; +} + +int sprintf(char * buf, const char *fmt, ...) +{ + va_list args; + int i; + + va_start(args, fmt); + i=vsprintf(buf,fmt,args); + va_end(args); + return i; +} + +static char sprint_buf[1024]; + +int +printf(const char *fmt, ...) +{ + va_list args; + int n; + + va_start(args, fmt); + n = vsprintf(sprint_buf, fmt, args); + va_end(args); + write(stdout, sprint_buf, n); + return n; +} diff --git a/arch/powerpc/boot/prom.h b/arch/powerpc/boot/prom.h new file mode 100644 index 00000000000..96ab5aec740 --- /dev/null +++ b/arch/powerpc/boot/prom.h @@ -0,0 +1,18 @@ +#ifndef _PPC_BOOT_PROM_H_ +#define _PPC_BOOT_PROM_H_ + +extern int (*prom) (void *); +extern void *chosen_handle; + +extern void *stdin; +extern void *stdout; +extern void *stderr; + +extern int write(void *handle, void *ptr, int nb); +extern int read(void *handle, void *ptr, int nb); +extern void exit(void); +extern void pause(void); +extern void *finddevice(const char *); +extern void *claim(unsigned long virt, unsigned long size, unsigned long align); +extern int getprop(void *phandle, const char *name, void *buf, int buflen); +#endif /* _PPC_BOOT_PROM_H_ */ diff --git a/arch/powerpc/boot/stdio.h b/arch/powerpc/boot/stdio.h new file mode 100644 index 00000000000..24bd3a8dee9 --- /dev/null +++ b/arch/powerpc/boot/stdio.h @@ -0,0 +1,16 @@ +#ifndef _PPC_BOOT_STDIO_H_ +#define _PPC_BOOT_STDIO_H_ + +extern int printf(const char *fmt, ...); + +extern int sprintf(char *buf, const char *fmt, ...); + +extern int vsprintf(char *buf, const char *fmt, va_list args); + +extern int putc(int c, void *f); +extern int putchar(int c); +extern int getchar(void); + +extern int fputs(char *str, void *f); + +#endif /* _PPC_BOOT_STDIO_H_ */ diff --git a/arch/powerpc/boot/string.S b/arch/powerpc/boot/string.S new file mode 100644 index 00000000000..b1eeaed7db1 --- /dev/null +++ b/arch/powerpc/boot/string.S @@ -0,0 +1,216 @@ +/* + * Copyright (C) Paul Mackerras 1997. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * NOTE: this code runs in 32 bit mode and is packaged as ELF32. + */ + +#include "ppc_asm.h" + + .text + .globl strcpy +strcpy: + addi r5,r3,-1 + addi r4,r4,-1 +1: lbzu r0,1(r4) + cmpwi 0,r0,0 + stbu r0,1(r5) + bne 1b + blr + + .globl strncpy +strncpy: + cmpwi 0,r5,0 + beqlr + mtctr r5 + addi r6,r3,-1 + addi r4,r4,-1 +1: lbzu r0,1(r4) + cmpwi 0,r0,0 + stbu r0,1(r6) + bdnzf 2,1b /* dec ctr, branch if ctr != 0 && !cr0.eq */ + blr + + .globl strcat +strcat: + addi r5,r3,-1 + addi r4,r4,-1 +1: lbzu r0,1(r5) + cmpwi 0,r0,0 + bne 1b + addi r5,r5,-1 +1: lbzu r0,1(r4) + cmpwi 0,r0,0 + stbu r0,1(r5) + bne 1b + blr + + .globl strcmp +strcmp: + addi r5,r3,-1 + addi r4,r4,-1 +1: lbzu r3,1(r5) + cmpwi 1,r3,0 + lbzu r0,1(r4) + subf. r3,r0,r3 + beqlr 1 + beq 1b + blr + + .globl strlen +strlen: + addi r4,r3,-1 +1: lbzu r0,1(r4) + cmpwi 0,r0,0 + bne 1b + subf r3,r3,r4 + blr + + .globl memset +memset: + rlwimi r4,r4,8,16,23 + rlwimi r4,r4,16,0,15 + addi r6,r3,-4 + cmplwi 0,r5,4 + blt 7f + stwu r4,4(r6) + beqlr + andi. r0,r6,3 + add r5,r0,r5 + subf r6,r0,r6 + rlwinm r0,r5,32-2,2,31 + mtctr r0 + bdz 6f +1: stwu r4,4(r6) + bdnz 1b +6: andi. r5,r5,3 +7: cmpwi 0,r5,0 + beqlr + mtctr r5 + addi r6,r6,3 +8: stbu r4,1(r6) + bdnz 8b + blr + + .globl memmove +memmove: + cmplw 0,r3,r4 + bgt backwards_memcpy + /* fall through */ + + .globl memcpy +memcpy: + rlwinm. r7,r5,32-3,3,31 /* r7 = r5 >> 3 */ + addi r6,r3,-4 + addi r4,r4,-4 + beq 2f /* if less than 8 bytes to do */ + andi. r0,r6,3 /* get dest word aligned */ + mtctr r7 + bne 5f +1: lwz r7,4(r4) + lwzu r8,8(r4) + stw r7,4(r6) + stwu r8,8(r6) + bdnz 1b + andi. r5,r5,7 +2: cmplwi 0,r5,4 + blt 3f + lwzu r0,4(r4) + addi r5,r5,-4 + stwu r0,4(r6) +3: cmpwi 0,r5,0 + beqlr + mtctr r5 + addi r4,r4,3 + addi r6,r6,3 +4: lbzu r0,1(r4) + stbu r0,1(r6) + bdnz 4b + blr +5: subfic r0,r0,4 + mtctr r0 +6: lbz r7,4(r4) + addi r4,r4,1 + stb r7,4(r6) + addi r6,r6,1 + bdnz 6b + subf r5,r0,r5 + rlwinm. r7,r5,32-3,3,31 + beq 2b + mtctr r7 + b 1b + + .globl backwards_memcpy +backwards_memcpy: + rlwinm. r7,r5,32-3,3,31 /* r7 = r5 >> 3 */ + add r6,r3,r5 + add r4,r4,r5 + beq 2f + andi. r0,r6,3 + mtctr r7 + bne 5f +1: lwz r7,-4(r4) + lwzu r8,-8(r4) + stw r7,-4(r6) + stwu r8,-8(r6) + bdnz 1b + andi. r5,r5,7 +2: cmplwi 0,r5,4 + blt 3f + lwzu r0,-4(r4) + subi r5,r5,4 + stwu r0,-4(r6) +3: cmpwi 0,r5,0 + beqlr + mtctr r5 +4: lbzu r0,-1(r4) + stbu r0,-1(r6) + bdnz 4b + blr +5: mtctr r0 +6: lbzu r7,-1(r4) + stbu r7,-1(r6) + bdnz 6b + subf r5,r0,r5 + rlwinm. r7,r5,32-3,3,31 + beq 2b + mtctr r7 + b 1b + + .globl memcmp +memcmp: + cmpwi 0,r5,0 + blelr + mtctr r5 + addi r6,r3,-1 + addi r4,r4,-1 +1: lbzu r3,1(r6) + lbzu r0,1(r4) + subf. r3,r0,r3 + bdnzt 2,1b + blr + + +/* + * Flush the dcache and invalidate the icache for a range of addresses. + * + * flush_cache(addr, len) + */ + .global flush_cache +flush_cache: + addi 4,4,0x1f /* len = (len + 0x1f) / 0x20 */ + rlwinm. 4,4,27,5,31 + mtctr 4 + beqlr +1: dcbf 0,3 + icbi 0,3 + addi 3,3,0x20 + bdnz 1b + sync + isync + blr + diff --git a/arch/powerpc/boot/string.h b/arch/powerpc/boot/string.h new file mode 100644 index 00000000000..9fdff1cc0d7 --- /dev/null +++ b/arch/powerpc/boot/string.h @@ -0,0 +1,17 @@ +#ifndef _PPC_BOOT_STRING_H_ +#define _PPC_BOOT_STRING_H_ +#include + +extern char *strcpy(char *dest, const char *src); +extern char *strncpy(char *dest, const char *src, size_t n); +extern char *strcat(char *dest, const char *src); +extern int strcmp(const char *s1, const char *s2); +extern size_t strlen(const char *s); +extern size_t strnlen(const char *s, size_t count); + +extern void *memset(void *s, int c, size_t n); +extern void *memmove(void *dest, const void *src, unsigned long n); +extern void *memcpy(void *dest, const void *src, unsigned long n); +extern int memcmp(const void *s1, const void *s2, size_t n); + +#endif /* _PPC_BOOT_STRING_H_ */ diff --git a/arch/powerpc/boot/zImage.lds b/arch/powerpc/boot/zImage.lds new file mode 100644 index 00000000000..4b6bb3ffe3d --- /dev/null +++ b/arch/powerpc/boot/zImage.lds @@ -0,0 +1,46 @@ +OUTPUT_ARCH(powerpc:common) +ENTRY(_zimage_start) +SECTIONS +{ + . = (4*1024*1024); + _start = .; + .text : + { + *(.text) + *(.fixup) + } + _etext = .; + . = ALIGN(4096); + .data : + { + *(.rodata*) + *(.data*) + *(.sdata*) + __got2_start = .; + *(.got2) + __got2_end = .; + } + + . = ALIGN(4096); + _vmlinux_start = .; + .kernel:vmlinux.strip : { *(.kernel:vmlinux.strip) } + _vmlinux_end = .; + + . = ALIGN(4096); + _initrd_start = .; + .kernel:initrd : { *(.kernel:initrd) } + _initrd_end = .; + + . = ALIGN(4096); + _edata = .; + + . = ALIGN(4096); + __bss_start = .; + .bss : + { + *(.sbss) + *(.bss) + } + . = ALIGN(4096); + _end = . ; +} -- cgit v1.2.3 From 5d66da3d71e6aeca80ca08dbebd8a1cd72e6ee1f Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Wed, 16 Nov 2005 13:54:32 +1100 Subject: [PATCH] powerpc: Make the vDSO functions set error code (#2) The vDSO functions should have the same calling convention as a syscall. Unfortunately, they currently don't set the cr0.so bit which is used to indicate an error. This patch makes them clear this bit unconditionally since all functions currently succeed. The syscall fallback done by some of them will eventually override this if the syscall fails. This also changes the symbol version of all vdso exports to make sure glibc can differenciate between old and fixed calls for existing ones like __kernel_gettimeofday. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/vdso32/cacheflush.S | 2 ++ arch/powerpc/kernel/vdso32/datapage.S | 3 ++- arch/powerpc/kernel/vdso32/gettimeofday.S | 4 ++++ arch/powerpc/kernel/vdso64/cacheflush.S | 2 ++ arch/powerpc/kernel/vdso64/datapage.S | 3 ++- arch/powerpc/kernel/vdso64/gettimeofday.S | 4 ++++ 6 files changed, 16 insertions(+), 2 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/vdso32/cacheflush.S b/arch/powerpc/kernel/vdso32/cacheflush.S index c8db993574e..09629aea3e4 100644 --- a/arch/powerpc/kernel/vdso32/cacheflush.S +++ b/arch/powerpc/kernel/vdso32/cacheflush.S @@ -35,6 +35,7 @@ V_FUNCTION_BEGIN(__kernel_sync_dicache) subf r8,r6,r4 /* compute length */ add r8,r8,r5 /* ensure we get enough */ srwi. r8,r8,7 /* compute line count */ + crclr cr0*4+so beqlr /* nothing to do? */ mtctr r8 mr r3,r6 @@ -58,6 +59,7 @@ V_FUNCTION_END(__kernel_sync_dicache) */ V_FUNCTION_BEGIN(__kernel_sync_dicache_p5) .cfi_startproc + crclr cr0*4+so sync isync li r3,0 diff --git a/arch/powerpc/kernel/vdso32/datapage.S b/arch/powerpc/kernel/vdso32/datapage.S index f6b38472318..4709f1d9542 100644 --- a/arch/powerpc/kernel/vdso32/datapage.S +++ b/arch/powerpc/kernel/vdso32/datapage.S @@ -54,7 +54,6 @@ V_FUNCTION_BEGIN(__kernel_get_syscall_map) .cfi_startproc mflr r12 .cfi_register lr,r12 - mr r4,r3 bl __get_datapage@local mtlr r12 @@ -63,6 +62,7 @@ V_FUNCTION_BEGIN(__kernel_get_syscall_map) beqlr li r0,__NR_syscalls stw r0,0(r4) + crclr cr0*4+so blr .cfi_endproc V_FUNCTION_END(__kernel_get_syscall_map) @@ -80,6 +80,7 @@ V_FUNCTION_BEGIN(__kernel_get_tbfreq) lwz r4,(CFG_TB_TICKS_PER_SEC + 4)(r3) lwz r3,CFG_TB_TICKS_PER_SEC(r3) mtlr r12 + crclr cr0*4+so blr .cfi_endproc V_FUNCTION_END(__kernel_get_tbfreq) diff --git a/arch/powerpc/kernel/vdso32/gettimeofday.S b/arch/powerpc/kernel/vdso32/gettimeofday.S index 0a32a41d50b..7eebff03a04 100644 --- a/arch/powerpc/kernel/vdso32/gettimeofday.S +++ b/arch/powerpc/kernel/vdso32/gettimeofday.S @@ -59,6 +59,7 @@ V_FUNCTION_BEGIN(__kernel_gettimeofday) stw r5,TZONE_TZ_DSTTIME(r11) 1: mtlr r12 + crclr cr0*4+so li r3,0 blr @@ -117,6 +118,7 @@ V_FUNCTION_BEGIN(__kernel_clock_gettime) mulli r5,r5,1000 stw r5,TSPC32_TV_NSEC(r11) mtlr r12 + crclr cr0*4+so li r3,0 blr @@ -185,6 +187,7 @@ V_FUNCTION_BEGIN(__kernel_clock_gettime) stw r4,TSPC32_TV_NSEC(r11) mtlr r12 + crclr cr0*4+so li r3,0 blr @@ -219,6 +222,7 @@ V_FUNCTION_BEGIN(__kernel_clock_getres) li r3,0 cmpli cr0,r4,0 + crclr cr0*4+so beqlr lis r5,CLOCK_REALTIME_RES@h ori r5,r5,CLOCK_REALTIME_RES@l diff --git a/arch/powerpc/kernel/vdso64/cacheflush.S b/arch/powerpc/kernel/vdso64/cacheflush.S index d4a0ad28d53..cb4ae0a5edd 100644 --- a/arch/powerpc/kernel/vdso64/cacheflush.S +++ b/arch/powerpc/kernel/vdso64/cacheflush.S @@ -35,6 +35,7 @@ V_FUNCTION_BEGIN(__kernel_sync_dicache) subf r8,r6,r4 /* compute length */ add r8,r8,r5 /* ensure we get enough */ srwi. r8,r8,7 /* compute line count */ + crclr cr0*4+so beqlr /* nothing to do? */ mtctr r8 mr r3,r6 @@ -58,6 +59,7 @@ V_FUNCTION_END(__kernel_sync_dicache) */ V_FUNCTION_BEGIN(__kernel_sync_dicache_p5) .cfi_startproc + crclr cr0*4+so sync isync li r3,0 diff --git a/arch/powerpc/kernel/vdso64/datapage.S b/arch/powerpc/kernel/vdso64/datapage.S index 6393e4137bc..3b2dd7d0c1e 100644 --- a/arch/powerpc/kernel/vdso64/datapage.S +++ b/arch/powerpc/kernel/vdso64/datapage.S @@ -54,12 +54,12 @@ V_FUNCTION_BEGIN(__kernel_get_syscall_map) .cfi_startproc mflr r12 .cfi_register lr,r12 - mr r4,r3 bl V_LOCAL_FUNC(__get_datapage) mtlr r12 addi r3,r3,CFG_SYSCALL_MAP64 cmpli cr0,r4,0 + crclr cr0*4+so beqlr li r0,__NR_syscalls stw r0,0(r4) @@ -80,6 +80,7 @@ V_FUNCTION_BEGIN(__kernel_get_tbfreq) bl V_LOCAL_FUNC(__get_datapage) ld r3,CFG_TB_TICKS_PER_SEC(r3) mtlr r12 + crclr cr0*4+so blr .cfi_endproc V_FUNCTION_END(__kernel_get_tbfreq) diff --git a/arch/powerpc/kernel/vdso64/gettimeofday.S b/arch/powerpc/kernel/vdso64/gettimeofday.S index 1a89094715c..ccaeda5136d 100644 --- a/arch/powerpc/kernel/vdso64/gettimeofday.S +++ b/arch/powerpc/kernel/vdso64/gettimeofday.S @@ -52,6 +52,7 @@ V_FUNCTION_BEGIN(__kernel_gettimeofday) stw r4,TZONE_TZ_MINWEST(r10) stw r5,TZONE_TZ_DSTTIME(r10) 1: mtlr r12 + crclr cr0*4+so li r3,0 /* always success */ blr .cfi_endproc @@ -99,6 +100,7 @@ V_FUNCTION_BEGIN(__kernel_clock_gettime) std r0,TSPC64_TV_NSEC(r11) /* store nsec in tp */ mtlr r12 + crclr cr0*4+so li r3,0 blr @@ -159,6 +161,7 @@ V_FUNCTION_BEGIN(__kernel_clock_gettime) std r7,TSPC64_TV_NSEC(r11) mtlr r12 + crclr cr0*4+so li r3,0 blr @@ -193,6 +196,7 @@ V_FUNCTION_BEGIN(__kernel_clock_getres) li r3,0 cmpli cr0,r4,0 + crclr cr0*4+so beqlr lis r5,CLOCK_REALTIME_RES@h ori r5,r5,CLOCK_REALTIME_RES@l -- cgit v1.2.3 From 1e28a7ddd3e713384e9c6768e7c502031dc205e2 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Thu, 17 Nov 2005 00:44:03 +0000 Subject: [PATCH] Avoid use of uninitialised spinlock in EEH. If the kernel supports both G5 and pSeries, and CONFIG_EEH is enabled, eeh_init() is (quite reasonably) never called when we boot on a G5. Yet eeh_check_failure() still gets called. We should avoid doing that if !eeh_subsystem_enabled. Signed-off-by: David Woodhouse Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/pseries/eeh.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c index 79de2310e70..c8d2a40dc5b 100644 --- a/arch/powerpc/platforms/pseries/eeh.c +++ b/arch/powerpc/platforms/pseries/eeh.c @@ -86,7 +86,8 @@ static int ibm_read_slot_reset_state; static int ibm_read_slot_reset_state2; static int ibm_slot_error_detail; -static int eeh_subsystem_enabled; +int eeh_subsystem_enabled; +EXPORT_SYMBOL(eeh_subsystem_enabled); /* Lock to avoid races due to multiple reports of an error */ static DEFINE_SPINLOCK(confirm_error_lock); -- cgit v1.2.3 From 68643cfb879ad8c327441f875b60981822016575 Mon Sep 17 00:00:00 2001 From: Olaf Hering Date: Thu, 17 Nov 2005 22:09:02 +0100 Subject: [PATCH] ppc boot: replace string labels with numbers Replacing the string labels with numbers saves 117 bytes in the final zImage. These local labels are not discared. Signed-off-by: Olaf Hering arch/powerpc/boot/crt0.S | 23 +++++++++++------------ 1 files changed, 11 insertions(+), 12 deletions(-) Signed-off-by: Paul Mackerras --- arch/powerpc/boot/crt0.S | 23 +++++++++++------------ 1 file changed, 11 insertions(+), 12 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/boot/crt0.S b/arch/powerpc/boot/crt0.S index 9cc44226393..d2f2ace56cd 100644 --- a/arch/powerpc/boot/crt0.S +++ b/arch/powerpc/boot/crt0.S @@ -14,43 +14,42 @@ .text .globl _zimage_start _zimage_start: - bl reloc_offset + bl 1f -reloc_offset: +1: mflr r0 - lis r9,reloc_offset@ha - addi r9,r9,reloc_offset@l + lis r9,1b@ha + addi r9,r9,1b@l subf. r0,r9,r0 - beq clear_caches + beq 3f -reloc_got2: lis r9,__got2_start@ha addi r9,r9,__got2_start@l lis r8,__got2_end@ha addi r8,r8,__got2_end@l subf. r8,r9,r8 - beq clear_caches + beq 3f srwi. r8,r8,2 mtctr r8 add r9,r0,r9 -reloc_got2_loop: +2: lwz r8,0(r9) add r8,r8,r0 stw r8,0(r9) addi r9,r9,4 - bdnz reloc_got2_loop + bdnz 2b -clear_caches: +3: lis r9,_start@h add r9,r0,r9 lis r8,_etext@ha addi r8,r8,_etext@l add r8,r0,r8 -1: dcbf r0,r9 +4: dcbf r0,r9 icbi r0,r9 addi r9,r9,0x20 cmplwi 0,r9,8 - blt 1b + blt 4b sync isync -- cgit v1.2.3 From a097a35c9a6de6316c18a3e914c64400b5a6db57 Mon Sep 17 00:00:00 2001 From: Segher Boessenkool Date: Thu, 17 Nov 2005 22:22:14 +0100 Subject: [PATCH] powerpc: Maple: request I/O resource. Reserve the Maple RTC I/O resource. Needed now we use genrtc. Signed-off-by: Segher Boessenkool Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/maple/time.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/maple/time.c b/arch/powerpc/platforms/maple/time.c index 40fc07a8e60..15846cc938a 100644 --- a/arch/powerpc/platforms/maple/time.c +++ b/arch/powerpc/platforms/maple/time.c @@ -158,6 +158,11 @@ int maple_set_rtc_time(struct rtc_time *tm) return 0; } +static struct resource rtc_iores = { + .name = "rtc", + .flags = IORESOURCE_BUSY, +}; + unsigned long __init maple_get_boot_time(void) { struct rtc_time tm; @@ -172,7 +177,11 @@ unsigned long __init maple_get_boot_time(void) printk(KERN_INFO "Maple: No device node for RTC, assuming " "legacy address (0x%x)\n", maple_rtc_addr); } - + + rtc_iores.start = maple_rtc_addr; + rtc_iores.end = maple_rtc_addr + 7; + request_resource(&ioport_resource, &rtc_iores); + maple_get_rtc_time(&tm); return mktime(tm.tm_year+1900, tm.tm_mon+1, tm.tm_mday, tm.tm_hour, tm.tm_min, tm.tm_sec); -- cgit v1.2.3 From 6defa38b3754c84cd3449447477aed81ea979407 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Fri, 18 Nov 2005 13:44:17 +1100 Subject: powerpc: Fix delay functions for 601 processors My earlier merge of delay.h introduced a timebase-based udelay for 32-bit machines but also broke the 601, which doesn't have the timebase register. This fixes it by using the 601's RTC register on the 601, and also moves __delay() and udelay() to be out-of-line in arch/powerpc/kernel/time.c. These functions aren't really performance critical, after all. Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/misc_32.S | 8 -------- arch/powerpc/kernel/time.c | 28 ++++++++++++++++++++++++++++ 2 files changed, 28 insertions(+), 8 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S index f6d84a75ed2..624a983a967 100644 --- a/arch/powerpc/kernel/misc_32.S +++ b/arch/powerpc/kernel/misc_32.S @@ -27,14 +27,6 @@ .text - .align 5 -_GLOBAL(__delay) - cmpwi 0,r3,0 - mtctr r3 - beqlr -1: bdnz 1b - blr - /* * This returns the high 64 bits of the product of two 64-bit numbers. */ diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index 070b4b458aa..de8479769bb 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -130,6 +130,34 @@ unsigned long tb_last_stamp; */ DEFINE_PER_CPU(unsigned long, last_jiffy); +void __delay(unsigned long loops) +{ + unsigned long start; + int diff; + + if (__USE_RTC()) { + start = get_rtcl(); + do { + /* the RTCL register wraps at 1000000000 */ + diff = get_rtcl() - start; + if (diff < 0) + diff += 1000000000; + } while (diff < loops); + } else { + start = get_tbl(); + while (get_tbl() - start < loops) + HMT_low(); + HMT_medium(); + } +} +EXPORT_SYMBOL(__delay); + +void udelay(unsigned long usecs) +{ + __delay(tb_ticks_per_usec * usecs); +} +EXPORT_SYMBOL(udelay); + static __inline__ void timer_check_rtc(void) { /* -- cgit v1.2.3 From 5daf9071b527089b1bd5d9cb3a5354b83121550e Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Fri, 18 Nov 2005 14:09:41 +1100 Subject: [PATCH] powerpc: merge align.c This patch merges align.c, the result isn't quite what was in ppc64 nor what was in ppc32 :) It should implement all the functionalities of both though. Kumar, since you played with that in the past, I suppose you have some test cases for verifying that it works properly before I dig out the 601 machine ? :) Since it's likely that I won't be able to test all scenario, code inspection is much welcome. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/Makefile | 2 +- arch/powerpc/kernel/align.c | 530 +++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 531 insertions(+), 1 deletion(-) create mode 100644 arch/powerpc/kernel/align.c (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index 4970e3721a8..0e679afb2e2 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -12,7 +12,7 @@ CFLAGS_btext.o += -fPIC endif obj-y := semaphore.o cputable.o ptrace.o syscalls.o \ - irq.o signal_32.o pmc.o vdso.o + irq.o align.o signal_32.o pmc.o vdso.o obj-y += vdso32/ obj-$(CONFIG_PPC64) += setup_64.o binfmt_elf32.o sys_ppc32.o \ signal_64.o ptrace32.o systbl.o \ diff --git a/arch/powerpc/kernel/align.c b/arch/powerpc/kernel/align.c new file mode 100644 index 00000000000..faaec9c6f78 --- /dev/null +++ b/arch/powerpc/kernel/align.c @@ -0,0 +1,530 @@ +/* align.c - handle alignment exceptions for the Power PC. + * + * Copyright (c) 1996 Paul Mackerras + * Copyright (c) 1998-1999 TiVo, Inc. + * PowerPC 403GCX modifications. + * Copyright (c) 1999 Grant Erickson + * PowerPC 403GCX/405GP modifications. + * Copyright (c) 2001-2002 PPC64 team, IBM Corp + * 64-bit and Power4 support + * Copyright (c) 2005 Benjamin Herrenschmidt, IBM Corp + * + * Merge ppc32 and ppc64 implementations + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include + +struct aligninfo { + unsigned char len; + unsigned char flags; +}; + +#define IS_XFORM(inst) (((inst) >> 26) == 31) +#define IS_DSFORM(inst) (((inst) >> 26) >= 56) + +#define INVALID { 0, 0 } + +#define LD 1 /* load */ +#define ST 2 /* store */ +#define SE 4 /* sign-extend value */ +#define F 8 /* to/from fp regs */ +#define U 0x10 /* update index register */ +#define M 0x20 /* multiple load/store */ +#define SW 0x40 /* byte swap int or ... */ +#define S 0x40 /* ... single-precision fp */ +#define SX 0x40 /* byte count in XER */ +#define HARD 0x80 /* string, stwcx. */ + +#define DCBZ 0x5f /* 8xx/82xx dcbz faults when cache not enabled */ + +#define SWAP(a, b) (t = (a), (a) = (b), (b) = t) + +/* + * The PowerPC stores certain bits of the instruction that caused the + * alignment exception in the DSISR register. This array maps those + * bits to information about the operand length and what the + * instruction would do. + */ +static struct aligninfo aligninfo[128] = { + { 4, LD }, /* 00 0 0000: lwz / lwarx */ + INVALID, /* 00 0 0001 */ + { 4, ST }, /* 00 0 0010: stw */ + INVALID, /* 00 0 0011 */ + { 2, LD }, /* 00 0 0100: lhz */ + { 2, LD+SE }, /* 00 0 0101: lha */ + { 2, ST }, /* 00 0 0110: sth */ + { 4, LD+M }, /* 00 0 0111: lmw */ + { 4, LD+F+S }, /* 00 0 1000: lfs */ + { 8, LD+F }, /* 00 0 1001: lfd */ + { 4, ST+F+S }, /* 00 0 1010: stfs */ + { 8, ST+F }, /* 00 0 1011: stfd */ + INVALID, /* 00 0 1100 */ + { 8, LD }, /* 00 0 1101: ld/ldu/lwa */ + INVALID, /* 00 0 1110 */ + { 8, ST }, /* 00 0 1111: std/stdu */ + { 4, LD+U }, /* 00 1 0000: lwzu */ + INVALID, /* 00 1 0001 */ + { 4, ST+U }, /* 00 1 0010: stwu */ + INVALID, /* 00 1 0011 */ + { 2, LD+U }, /* 00 1 0100: lhzu */ + { 2, LD+SE+U }, /* 00 1 0101: lhau */ + { 2, ST+U }, /* 00 1 0110: sthu */ + { 4, ST+M }, /* 00 1 0111: stmw */ + { 4, LD+F+S+U }, /* 00 1 1000: lfsu */ + { 8, LD+F+U }, /* 00 1 1001: lfdu */ + { 4, ST+F+S+U }, /* 00 1 1010: stfsu */ + { 8, ST+F+U }, /* 00 1 1011: stfdu */ + INVALID, /* 00 1 1100 */ + INVALID, /* 00 1 1101 */ + INVALID, /* 00 1 1110 */ + INVALID, /* 00 1 1111 */ + { 8, LD }, /* 01 0 0000: ldx */ + INVALID, /* 01 0 0001 */ + { 8, ST }, /* 01 0 0010: stdx */ + INVALID, /* 01 0 0011 */ + INVALID, /* 01 0 0100 */ + { 4, LD+SE }, /* 01 0 0101: lwax */ + INVALID, /* 01 0 0110 */ + INVALID, /* 01 0 0111 */ + { 4, LD+M+HARD+SX }, /* 01 0 1000: lswx */ + { 4, LD+M+HARD }, /* 01 0 1001: lswi */ + { 4, ST+M+HARD+SX }, /* 01 0 1010: stswx */ + { 4, ST+M+HARD }, /* 01 0 1011: stswi */ + INVALID, /* 01 0 1100 */ + { 8, LD+U }, /* 01 0 1101: ldu */ + INVALID, /* 01 0 1110 */ + { 8, ST+U }, /* 01 0 1111: stdu */ + { 8, LD+U }, /* 01 1 0000: ldux */ + INVALID, /* 01 1 0001 */ + { 8, ST+U }, /* 01 1 0010: stdux */ + INVALID, /* 01 1 0011 */ + INVALID, /* 01 1 0100 */ + { 4, LD+SE+U }, /* 01 1 0101: lwaux */ + INVALID, /* 01 1 0110 */ + INVALID, /* 01 1 0111 */ + INVALID, /* 01 1 1000 */ + INVALID, /* 01 1 1001 */ + INVALID, /* 01 1 1010 */ + INVALID, /* 01 1 1011 */ + INVALID, /* 01 1 1100 */ + INVALID, /* 01 1 1101 */ + INVALID, /* 01 1 1110 */ + INVALID, /* 01 1 1111 */ + INVALID, /* 10 0 0000 */ + INVALID, /* 10 0 0001 */ + INVALID, /* 10 0 0010: stwcx. */ + INVALID, /* 10 0 0011 */ + INVALID, /* 10 0 0100 */ + INVALID, /* 10 0 0101 */ + INVALID, /* 10 0 0110 */ + INVALID, /* 10 0 0111 */ + { 4, LD+SW }, /* 10 0 1000: lwbrx */ + INVALID, /* 10 0 1001 */ + { 4, ST+SW }, /* 10 0 1010: stwbrx */ + INVALID, /* 10 0 1011 */ + { 2, LD+SW }, /* 10 0 1100: lhbrx */ + { 4, LD+SE }, /* 10 0 1101 lwa */ + { 2, ST+SW }, /* 10 0 1110: sthbrx */ + INVALID, /* 10 0 1111 */ + INVALID, /* 10 1 0000 */ + INVALID, /* 10 1 0001 */ + INVALID, /* 10 1 0010 */ + INVALID, /* 10 1 0011 */ + INVALID, /* 10 1 0100 */ + INVALID, /* 10 1 0101 */ + INVALID, /* 10 1 0110 */ + INVALID, /* 10 1 0111 */ + INVALID, /* 10 1 1000 */ + INVALID, /* 10 1 1001 */ + INVALID, /* 10 1 1010 */ + INVALID, /* 10 1 1011 */ + INVALID, /* 10 1 1100 */ + INVALID, /* 10 1 1101 */ + INVALID, /* 10 1 1110 */ + { 0, ST+HARD }, /* 10 1 1111: dcbz */ + { 4, LD }, /* 11 0 0000: lwzx */ + INVALID, /* 11 0 0001 */ + { 4, ST }, /* 11 0 0010: stwx */ + INVALID, /* 11 0 0011 */ + { 2, LD }, /* 11 0 0100: lhzx */ + { 2, LD+SE }, /* 11 0 0101: lhax */ + { 2, ST }, /* 11 0 0110: sthx */ + INVALID, /* 11 0 0111 */ + { 4, LD+F+S }, /* 11 0 1000: lfsx */ + { 8, LD+F }, /* 11 0 1001: lfdx */ + { 4, ST+F+S }, /* 11 0 1010: stfsx */ + { 8, ST+F }, /* 11 0 1011: stfdx */ + INVALID, /* 11 0 1100 */ + { 8, LD+M }, /* 11 0 1101: lmd */ + INVALID, /* 11 0 1110 */ + { 8, ST+M }, /* 11 0 1111: stmd */ + { 4, LD+U }, /* 11 1 0000: lwzux */ + INVALID, /* 11 1 0001 */ + { 4, ST+U }, /* 11 1 0010: stwux */ + INVALID, /* 11 1 0011 */ + { 2, LD+U }, /* 11 1 0100: lhzux */ + { 2, LD+SE+U }, /* 11 1 0101: lhaux */ + { 2, ST+U }, /* 11 1 0110: sthux */ + INVALID, /* 11 1 0111 */ + { 4, LD+F+S+U }, /* 11 1 1000: lfsux */ + { 8, LD+F+U }, /* 11 1 1001: lfdux */ + { 4, ST+F+S+U }, /* 11 1 1010: stfsux */ + { 8, ST+F+U }, /* 11 1 1011: stfdux */ + INVALID, /* 11 1 1100 */ + INVALID, /* 11 1 1101 */ + INVALID, /* 11 1 1110 */ + INVALID, /* 11 1 1111 */ +}; + +/* + * Create a DSISR value from the instruction + */ +static inline unsigned make_dsisr(unsigned instr) +{ + unsigned dsisr; + + + /* bits 6:15 --> 22:31 */ + dsisr = (instr & 0x03ff0000) >> 16; + + if (IS_XFORM(instr)) { + /* bits 29:30 --> 15:16 */ + dsisr |= (instr & 0x00000006) << 14; + /* bit 25 --> 17 */ + dsisr |= (instr & 0x00000040) << 8; + /* bits 21:24 --> 18:21 */ + dsisr |= (instr & 0x00000780) << 3; + } else { + /* bit 5 --> 17 */ + dsisr |= (instr & 0x04000000) >> 12; + /* bits 1: 4 --> 18:21 */ + dsisr |= (instr & 0x78000000) >> 17; + /* bits 30:31 --> 12:13 */ + if (IS_DSFORM(instr)) + dsisr |= (instr & 0x00000003) << 18; + } + + return dsisr; +} + +/* + * The dcbz (data cache block zero) instruction + * gives an alignment fault if used on non-cacheable + * memory. We handle the fault mainly for the + * case when we are running with the cache disabled + * for debugging. + */ +static int emulate_dcbz(struct pt_regs *regs, unsigned char __user *addr) +{ + long __user *p; + int i, size; + +#ifdef __powerpc64__ + size = ppc64_caches.dline_size; +#else + size = L1_CACHE_BYTES; +#endif + p = (long __user *) (regs->dar & -size); + if (user_mode(regs) && !access_ok(VERIFY_WRITE, p, size)) + return -EFAULT; + for (i = 0; i < size / sizeof(long); ++i) + if (__put_user(0, p+i)) + return -EFAULT; + return 1; +} + +/* + * Emulate load & store multiple instructions + * On 64-bit machines, these instructions only affect/use the + * bottom 4 bytes of each register, and the loads clear the + * top 4 bytes of the affected register. + */ +#ifdef CONFIG_PPC64 +#define REG_BYTE(rp, i) *((u8 *)((rp) + ((i) >> 2)) + ((i) & 3) + 4) +#else +#define REG_BYTE(rp, i) *((u8 *)(rp) + (i)) +#endif + +static int emulate_multiple(struct pt_regs *regs, unsigned char __user *addr, + unsigned int reg, unsigned int nb, + unsigned int flags, unsigned int instr) +{ + unsigned long *rptr; + unsigned int nb0, i; + + /* + * We do not try to emulate 8 bytes multiple as they aren't really + * available in our operating environments and we don't try to + * emulate multiples operations in kernel land as they should never + * be used/generated there at least not on unaligned boundaries + */ + if (unlikely((nb > 4) || !user_mode(regs))) + return 0; + + /* lmw, stmw, lswi/x, stswi/x */ + nb0 = 0; + if (flags & HARD) { + if (flags & SX) { + nb = regs->xer & 127; + if (nb == 0) + return 1; + } else { + if (__get_user(instr, + (unsigned int __user *)regs->nip)) + return -EFAULT; + nb = (instr >> 11) & 0x1f; + if (nb == 0) + nb = 32; + } + if (nb + reg * 4 > 128) { + nb0 = nb + reg * 4 - 128; + nb = 128 - reg * 4; + } + } else { + /* lwm, stmw */ + nb = (32 - reg) * 4; + } + + if (!access_ok((flags & ST ? VERIFY_WRITE: VERIFY_READ), addr, nb+nb0)) + return -EFAULT; /* bad address */ + + rptr = ®s->gpr[reg]; + if (flags & LD) { + /* + * This zeroes the top 4 bytes of the affected registers + * in 64-bit mode, and also zeroes out any remaining + * bytes of the last register for lsw*. + */ + memset(rptr, 0, ((nb + 3) / 4) * sizeof(unsigned long)); + if (nb0 > 0) + memset(®s->gpr[0], 0, + ((nb0 + 3) / 4) * sizeof(unsigned long)); + + for (i = 0; i < nb; ++i) + if (__get_user(REG_BYTE(rptr, i), addr + i)) + return -EFAULT; + if (nb0 > 0) { + rptr = ®s->gpr[0]; + addr += nb; + for (i = 0; i < nb0; ++i) + if (__get_user(REG_BYTE(rptr, i), addr + i)) + return -EFAULT; + } + + } else { + for (i = 0; i < nb; ++i) + if (__put_user(REG_BYTE(rptr, i), addr + i)) + return -EFAULT; + if (nb0 > 0) { + rptr = ®s->gpr[0]; + addr += nb; + for (i = 0; i < nb0; ++i) + if (__put_user(REG_BYTE(rptr, i), addr + i)) + return -EFAULT; + } + } + return 1; +} + + +/* + * Called on alignment exception. Attempts to fixup + * + * Return 1 on success + * Return 0 if unable to handle the interrupt + * Return -EFAULT if data address is bad + */ + +int fix_alignment(struct pt_regs *regs) +{ + unsigned int instr, nb, flags; + unsigned int reg, areg; + unsigned int dsisr; + unsigned char __user *addr; + unsigned char __user *p; + int ret, t; + union { + u64 ll; + double dd; + unsigned char v[8]; + struct { + unsigned hi32; + int low32; + } x32; + struct { + unsigned char hi48[6]; + short low16; + } x16; + } data; + + /* + * We require a complete register set, if not, then our assembly + * is broken + */ + CHECK_FULL_REGS(regs); + + dsisr = regs->dsisr; + + /* Some processors don't provide us with a DSISR we can use here, + * let's make one up from the instruction + */ + if (cpu_has_feature(CPU_FTR_NODSISRALIGN)) { + unsigned int real_instr; + if (unlikely(__get_user(real_instr, + (unsigned int __user *)regs->nip))) + return -EFAULT; + dsisr = make_dsisr(real_instr); + } + + /* extract the operation and registers from the dsisr */ + reg = (dsisr >> 5) & 0x1f; /* source/dest register */ + areg = dsisr & 0x1f; /* register to update */ + instr = (dsisr >> 10) & 0x7f; + instr |= (dsisr >> 13) & 0x60; + + /* Lookup the operation in our table */ + nb = aligninfo[instr].len; + flags = aligninfo[instr].flags; + + /* DAR has the operand effective address */ + addr = (unsigned char __user *)regs->dar; + + /* A size of 0 indicates an instruction we don't support, with + * the exception of DCBZ which is handled as a special case here + */ + if (instr == DCBZ) + return emulate_dcbz(regs, addr); + if (unlikely(nb == 0)) + return 0; + + /* Load/Store Multiple instructions are handled in their own + * function + */ + if (flags & M) + return emulate_multiple(regs, addr, reg, nb, flags, instr); + + /* Verify the address of the operand */ + if (unlikely(user_mode(regs) && + !access_ok((flags & ST ? VERIFY_WRITE : VERIFY_READ), + addr, nb))) + return -EFAULT; + + /* Force the fprs into the save area so we can reference them */ + if (flags & F) { + /* userland only */ + if (unlikely(!user_mode(regs))) + return 0; + flush_fp_to_thread(current); + } + + /* If we are loading, get the data from user space, else + * get it from register values + */ + if (flags & LD) { + data.ll = 0; + ret = 0; + p = addr; + switch (nb) { + case 8: + ret |= __get_user(data.v[0], p++); + ret |= __get_user(data.v[1], p++); + ret |= __get_user(data.v[2], p++); + ret |= __get_user(data.v[3], p++); + case 4: + ret |= __get_user(data.v[4], p++); + ret |= __get_user(data.v[5], p++); + case 2: + ret |= __get_user(data.v[6], p++); + ret |= __get_user(data.v[7], p++); + if (unlikely(ret)) + return -EFAULT; + } + } else if (flags & F) + data.dd = current->thread.fpr[reg]; + else + data.ll = regs->gpr[reg]; + + /* Perform other misc operations like sign extension, byteswap, + * or floating point single precision conversion + */ + switch (flags & ~U) { + case LD+SE: /* sign extend */ + if ( nb == 2 ) + data.ll = data.x16.low16; + else /* nb must be 4 */ + data.ll = data.x32.low32; + break; + case LD+S: /* byte-swap */ + case ST+S: + if (nb == 2) { + SWAP(data.v[6], data.v[7]); + } else { + SWAP(data.v[4], data.v[7]); + SWAP(data.v[5], data.v[6]); + } + break; + + /* Single-precision FP load and store require conversions... */ + case LD+F+S: +#ifdef CONFIG_PPC_FPU + preempt_disable(); + enable_kernel_fp(); + cvt_fd((float *)&data.v[4], &data.dd, ¤t->thread); + preempt_enable(); +#else + return 0; +#endif + break; + case ST+F+S: +#ifdef CONFIG_PPC_FPU + preempt_disable(); + enable_kernel_fp(); + cvt_df(&data.dd, (float *)&data.v[4], ¤t->thread); + preempt_enable(); +#else + return 0; +#endif + break; + } + + /* Store result to memory or update registers */ + if (flags & ST) { + ret = 0; + p = addr; + switch (nb) { + case 8: + ret |= __put_user(data.v[0], p++); + ret |= __put_user(data.v[1], p++); + ret |= __put_user(data.v[2], p++); + ret |= __put_user(data.v[3], p++); + case 4: + ret |= __put_user(data.v[4], p++); + ret |= __put_user(data.v[5], p++); + case 2: + ret |= __put_user(data.v[6], p++); + ret |= __put_user(data.v[7], p++); + } + if (unlikely(ret)) + return -EFAULT; + } else if (flags & F) + current->thread.fpr[reg] = data.dd; + else + regs->gpr[reg] = data.ll; + + /* Update RA as needed */ + if (flags & U) + regs->gpr[areg] = regs->dar; + + return 1; +} -- cgit v1.2.3 From f62859bb6871c5e4a8e591c60befc8caaf54db8c Mon Sep 17 00:00:00 2001 From: Mike Kravetz Date: Mon, 14 Nov 2005 16:12:49 -0800 Subject: [PATCH] Remove SPAN_OTHER_NODES config definition The config option SPAN_OTHER_NODES was created so that we could make pSeries numa layouts work within the DISCONTIG memory model. Now that DISCONTIG has been replaced by SPARSEMEM, we can eliminate this option. I'll be sending a separate patch to Andrew to remove the arch independent code as pSeries was the only arch that needed this. Signed-off-by: Mike Kravetz Signed-off-by: Paul Mackerras --- arch/powerpc/Kconfig | 13 ------------- arch/powerpc/configs/pseries_defconfig | 1 - 2 files changed, 14 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 94df74bcc0e..bb2efdd566a 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -598,19 +598,6 @@ config ARCH_MEMORY_PROBE def_bool y depends on MEMORY_HOTPLUG -# Some NUMA nodes have memory ranges that span -# other nodes. Even though a pfn is valid and -# between a node's start and end pfns, it may not -# reside on that node. -# -# This is a relatively temporary hack that should -# be able to go away when sparsemem is fully in -# place - -config NODES_SPAN_OTHER_NODES - def_bool y - depends on NEED_MULTIPLE_NODES - config PPC_64K_PAGES bool "64k page size" depends on PPC64 diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig index b4745c918a4..b589b196eb3 100644 --- a/arch/powerpc/configs/pseries_defconfig +++ b/arch/powerpc/configs/pseries_defconfig @@ -165,7 +165,6 @@ CONFIG_SPARSEMEM_EXTREME=y # CONFIG_MEMORY_HOTPLUG is not set CONFIG_SPLIT_PTLOCK_CPUS=4096 CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y -CONFIG_NODES_SPAN_OTHER_NODES=y # CONFIG_PPC_64K_PAGES is not set CONFIG_SCHED_SMT=y CONFIG_PROC_DEVICETREE=y -- cgit v1.2.3 From 437a58db57c61385baaa1cb8b7fa590b6a2f1607 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Fri, 18 Nov 2005 15:43:34 +1100 Subject: powerpc: Move remaining .c files from arch/ppc64 to arch/powerpc This also deletes the now-unused Makefiles under arch/ppc64. Both of the files moved over could use some merging, but for now I have moved them as-is and arranged for them to be used only in 64-bit kernels. For 32-bit kernels we still use arch/ppc/kernel/idle.c and drivers/char/generic_nvram.c as before. Signed-off-by: Paul Mackerras --- arch/powerpc/Makefile | 4 +- arch/powerpc/kernel/Makefile | 5 +- arch/powerpc/kernel/idle_64.c | 121 +++++++ arch/powerpc/kernel/nvram_64.c | 742 +++++++++++++++++++++++++++++++++++++++++ 4 files changed, 869 insertions(+), 3 deletions(-) create mode 100644 arch/powerpc/kernel/idle_64.c create mode 100644 arch/powerpc/kernel/nvram_64.c (limited to 'arch/powerpc') diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index 99dbea8c5c5..987036b60c8 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -125,11 +125,11 @@ head-$(CONFIG_PPC64) += arch/powerpc/kernel/entry_64.o head-$(CONFIG_PPC_FPU) += arch/powerpc/kernel/fpu.o core-y += arch/powerpc/kernel/ \ - arch/$(OLDARCH)/kernel/ \ arch/powerpc/mm/ \ arch/powerpc/lib/ \ arch/powerpc/sysdev/ \ arch/powerpc/platforms/ +core-$(CONFIG_PPC32) += arch/ppc/kernel/ core-$(CONFIG_MATH_EMULATION) += arch/ppc/math-emu/ core-$(CONFIG_XMON) += arch/powerpc/xmon/ core-$(CONFIG_APUS) += arch/ppc/amiga/ @@ -165,7 +165,7 @@ define archhelp @echo ' (your) ~/bin/installkernel or' @echo ' (distribution) /sbin/installkernel or' @echo ' install to $$(INSTALL_PATH) and run lilo' - @echo ' *_defconfig - Select default config from arch/$(ARCH)/ppc/configs' + @echo ' *_defconfig - Select default config from arch/$(ARCH)/configs' endef archclean: diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index 0e679afb2e2..9ed551b6c17 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -17,7 +17,7 @@ obj-y += vdso32/ obj-$(CONFIG_PPC64) += setup_64.o binfmt_elf32.o sys_ppc32.o \ signal_64.o ptrace32.o systbl.o \ paca.o ioctl32.o cpu_setup_power4.o \ - firmware.o sysfs.o udbg.o + firmware.o sysfs.o udbg.o idle_64.o obj-$(CONFIG_PPC64) += vdso64/ obj-$(CONFIG_ALTIVEC) += vecemu.o vector.o obj-$(CONFIG_POWER4) += idle_power4.o @@ -35,6 +35,7 @@ obj-$(CONFIG_PPC_PSERIES) += udbg_16550.o obj-$(CONFIG_PPC_MAPLE) += udbg_16550.o udbgscc-$(CONFIG_PPC64) := udbg_scc.o obj-$(CONFIG_PPC_PMAC) += $(udbgscc-y) +obj64-$(CONFIG_PPC_MULTIPLATFORM) += nvram_64.o ifeq ($(CONFIG_PPC_MERGE),y) @@ -78,5 +79,7 @@ smpobj-$(CONFIG_SMP) += smp.o endif +obj-$(CONFIG_PPC64) += $(obj64-y) + extra-$(CONFIG_PPC_FPU) += fpu.o extra-$(CONFIG_PPC64) += entry_64.o diff --git a/arch/powerpc/kernel/idle_64.c b/arch/powerpc/kernel/idle_64.c new file mode 100644 index 00000000000..b879d3057ef --- /dev/null +++ b/arch/powerpc/kernel/idle_64.c @@ -0,0 +1,121 @@ +/* + * Idle daemon for PowerPC. Idle daemon will handle any action + * that needs to be taken when the system becomes idle. + * + * Originally Written by Cort Dougan (cort@cs.nmt.edu) + * + * iSeries supported added by Mike Corrigan + * + * Additional shared processor, SMT, and firmware support + * Copyright (c) 2003 Dave Engebretsen + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +extern void power4_idle(void); + +void default_idle(void) +{ + unsigned int cpu = smp_processor_id(); + set_thread_flag(TIF_POLLING_NRFLAG); + + while (1) { + if (!need_resched()) { + while (!need_resched() && !cpu_is_offline(cpu)) { + ppc64_runlatch_off(); + + /* + * Go into low thread priority and possibly + * low power mode. + */ + HMT_low(); + HMT_very_low(); + } + + HMT_medium(); + } + + ppc64_runlatch_on(); + preempt_enable_no_resched(); + schedule(); + preempt_disable(); + if (cpu_is_offline(cpu) && system_state == SYSTEM_RUNNING) + cpu_die(); + } +} + +void native_idle(void) +{ + while (1) { + ppc64_runlatch_off(); + + if (!need_resched()) + power4_idle(); + + if (need_resched()) { + ppc64_runlatch_on(); + preempt_enable_no_resched(); + schedule(); + preempt_disable(); + } + + if (cpu_is_offline(smp_processor_id()) && + system_state == SYSTEM_RUNNING) + cpu_die(); + } +} + +void cpu_idle(void) +{ + BUG_ON(NULL == ppc_md.idle_loop); + ppc_md.idle_loop(); +} + +int powersave_nap; + +#ifdef CONFIG_SYSCTL +/* + * Register the sysctl to set/clear powersave_nap. + */ +static ctl_table powersave_nap_ctl_table[]={ + { + .ctl_name = KERN_PPC_POWERSAVE_NAP, + .procname = "powersave-nap", + .data = &powersave_nap, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = &proc_dointvec, + }, + { 0, }, +}; +static ctl_table powersave_nap_sysctl_root[] = { + { 1, "kernel", NULL, 0, 0755, powersave_nap_ctl_table, }, + { 0,}, +}; + +static int __init +register_powersave_nap_sysctl(void) +{ + register_sysctl_table(powersave_nap_sysctl_root, 0); + + return 0; +} +__initcall(register_powersave_nap_sysctl); +#endif diff --git a/arch/powerpc/kernel/nvram_64.c b/arch/powerpc/kernel/nvram_64.c new file mode 100644 index 00000000000..c0fcd29918c --- /dev/null +++ b/arch/powerpc/kernel/nvram_64.c @@ -0,0 +1,742 @@ +/* + * c 2001 PPC 64 Team, IBM Corp + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * /dev/nvram driver for PPC64 + * + * This perhaps should live in drivers/char + * + * TODO: Split the /dev/nvram part (that one can use + * drivers/char/generic_nvram.c) from the arch & partition + * parsing code. + */ + +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#undef DEBUG_NVRAM + +static int nvram_scan_partitions(void); +static int nvram_setup_partition(void); +static int nvram_create_os_partition(void); +static int nvram_remove_os_partition(void); + +static struct nvram_partition * nvram_part; +static long nvram_error_log_index = -1; +static long nvram_error_log_size = 0; + +int no_logging = 1; /* Until we initialize everything, + * make sure we don't try logging + * anything */ + +extern volatile int error_log_cnt; + +struct err_log_info { + int error_type; + unsigned int seq_num; +}; + +static loff_t dev_nvram_llseek(struct file *file, loff_t offset, int origin) +{ + int size; + + if (ppc_md.nvram_size == NULL) + return -ENODEV; + size = ppc_md.nvram_size(); + + switch (origin) { + case 1: + offset += file->f_pos; + break; + case 2: + offset += size; + break; + } + if (offset < 0) + return -EINVAL; + file->f_pos = offset; + return file->f_pos; +} + + +static ssize_t dev_nvram_read(struct file *file, char __user *buf, + size_t count, loff_t *ppos) +{ + ssize_t len; + char *tmp_buffer; + int size; + + if (ppc_md.nvram_size == NULL) + return -ENODEV; + size = ppc_md.nvram_size(); + + if (!access_ok(VERIFY_WRITE, buf, count)) + return -EFAULT; + if (*ppos >= size) + return 0; + if (count > size) + count = size; + + tmp_buffer = (char *) kmalloc(count, GFP_KERNEL); + if (!tmp_buffer) { + printk(KERN_ERR "dev_read_nvram: kmalloc failed\n"); + return -ENOMEM; + } + + len = ppc_md.nvram_read(tmp_buffer, count, ppos); + if ((long)len <= 0) { + kfree(tmp_buffer); + return len; + } + + if (copy_to_user(buf, tmp_buffer, len)) { + kfree(tmp_buffer); + return -EFAULT; + } + + kfree(tmp_buffer); + return len; + +} + +static ssize_t dev_nvram_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) +{ + ssize_t len; + char * tmp_buffer; + int size; + + if (ppc_md.nvram_size == NULL) + return -ENODEV; + size = ppc_md.nvram_size(); + + if (!access_ok(VERIFY_READ, buf, count)) + return -EFAULT; + if (*ppos >= size) + return 0; + if (count > size) + count = size; + + tmp_buffer = (char *) kmalloc(count, GFP_KERNEL); + if (!tmp_buffer) { + printk(KERN_ERR "dev_nvram_write: kmalloc failed\n"); + return -ENOMEM; + } + + if (copy_from_user(tmp_buffer, buf, count)) { + kfree(tmp_buffer); + return -EFAULT; + } + + len = ppc_md.nvram_write(tmp_buffer, count, ppos); + if ((long)len <= 0) { + kfree(tmp_buffer); + return len; + } + + kfree(tmp_buffer); + return len; +} + +static int dev_nvram_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg) +{ + switch(cmd) { +#ifdef CONFIG_PPC_PMAC + case OBSOLETE_PMAC_NVRAM_GET_OFFSET: + printk(KERN_WARNING "nvram: Using obsolete PMAC_NVRAM_GET_OFFSET ioctl\n"); + case IOC_NVRAM_GET_OFFSET: { + int part, offset; + + if (_machine != PLATFORM_POWERMAC) + return -EINVAL; + if (copy_from_user(&part, (void __user*)arg, sizeof(part)) != 0) + return -EFAULT; + if (part < pmac_nvram_OF || part > pmac_nvram_NR) + return -EINVAL; + offset = pmac_get_partition(part); + if (offset < 0) + return offset; + if (copy_to_user((void __user*)arg, &offset, sizeof(offset)) != 0) + return -EFAULT; + return 0; + } +#endif /* CONFIG_PPC_PMAC */ + } + return -EINVAL; +} + +struct file_operations nvram_fops = { + .owner = THIS_MODULE, + .llseek = dev_nvram_llseek, + .read = dev_nvram_read, + .write = dev_nvram_write, + .ioctl = dev_nvram_ioctl, +}; + +static struct miscdevice nvram_dev = { + NVRAM_MINOR, + "nvram", + &nvram_fops +}; + + +#ifdef DEBUG_NVRAM +static void nvram_print_partitions(char * label) +{ + struct list_head * p; + struct nvram_partition * tmp_part; + + printk(KERN_WARNING "--------%s---------\n", label); + printk(KERN_WARNING "indx\t\tsig\tchks\tlen\tname\n"); + list_for_each(p, &nvram_part->partition) { + tmp_part = list_entry(p, struct nvram_partition, partition); + printk(KERN_WARNING "%d \t%02x\t%02x\t%d\t%s\n", + tmp_part->index, tmp_part->header.signature, + tmp_part->header.checksum, tmp_part->header.length, + tmp_part->header.name); + } +} +#endif + + +static int nvram_write_header(struct nvram_partition * part) +{ + loff_t tmp_index; + int rc; + + tmp_index = part->index; + rc = ppc_md.nvram_write((char *)&part->header, NVRAM_HEADER_LEN, &tmp_index); + + return rc; +} + + +static unsigned char nvram_checksum(struct nvram_header *p) +{ + unsigned int c_sum, c_sum2; + unsigned short *sp = (unsigned short *)p->name; /* assume 6 shorts */ + c_sum = p->signature + p->length + sp[0] + sp[1] + sp[2] + sp[3] + sp[4] + sp[5]; + + /* The sum may have spilled into the 3rd byte. Fold it back. */ + c_sum = ((c_sum & 0xffff) + (c_sum >> 16)) & 0xffff; + /* The sum cannot exceed 2 bytes. Fold it into a checksum */ + c_sum2 = (c_sum >> 8) + (c_sum << 8); + c_sum = ((c_sum + c_sum2) >> 8) & 0xff; + return c_sum; +} + + +/* + * Find an nvram partition, sig can be 0 for any + * partition or name can be NULL for any name, else + * tries to match both + */ +struct nvram_partition *nvram_find_partition(int sig, const char *name) +{ + struct nvram_partition * part; + struct list_head * p; + + list_for_each(p, &nvram_part->partition) { + part = list_entry(p, struct nvram_partition, partition); + + if (sig && part->header.signature != sig) + continue; + if (name && 0 != strncmp(name, part->header.name, 12)) + continue; + return part; + } + return NULL; +} +EXPORT_SYMBOL(nvram_find_partition); + + +static int nvram_remove_os_partition(void) +{ + struct list_head *i; + struct list_head *j; + struct nvram_partition * part; + struct nvram_partition * cur_part; + int rc; + + list_for_each(i, &nvram_part->partition) { + part = list_entry(i, struct nvram_partition, partition); + if (part->header.signature != NVRAM_SIG_OS) + continue; + + /* Make os partition a free partition */ + part->header.signature = NVRAM_SIG_FREE; + sprintf(part->header.name, "wwwwwwwwwwww"); + part->header.checksum = nvram_checksum(&part->header); + + /* Merge contiguous free partitions backwards */ + list_for_each_prev(j, &part->partition) { + cur_part = list_entry(j, struct nvram_partition, partition); + if (cur_part == nvram_part || cur_part->header.signature != NVRAM_SIG_FREE) { + break; + } + + part->header.length += cur_part->header.length; + part->header.checksum = nvram_checksum(&part->header); + part->index = cur_part->index; + + list_del(&cur_part->partition); + kfree(cur_part); + j = &part->partition; /* fixup our loop */ + } + + /* Merge contiguous free partitions forwards */ + list_for_each(j, &part->partition) { + cur_part = list_entry(j, struct nvram_partition, partition); + if (cur_part == nvram_part || cur_part->header.signature != NVRAM_SIG_FREE) { + break; + } + + part->header.length += cur_part->header.length; + part->header.checksum = nvram_checksum(&part->header); + + list_del(&cur_part->partition); + kfree(cur_part); + j = &part->partition; /* fixup our loop */ + } + + rc = nvram_write_header(part); + if (rc <= 0) { + printk(KERN_ERR "nvram_remove_os_partition: nvram_write failed (%d)\n", rc); + return rc; + } + + } + + return 0; +} + +/* nvram_create_os_partition + * + * Create a OS linux partition to buffer error logs. + * Will create a partition starting at the first free + * space found if space has enough room. + */ +static int nvram_create_os_partition(void) +{ + struct nvram_partition *part; + struct nvram_partition *new_part; + struct nvram_partition *free_part = NULL; + int seq_init[2] = { 0, 0 }; + loff_t tmp_index; + long size = 0; + int rc; + + /* Find a free partition that will give us the maximum needed size + If can't find one that will give us the minimum size needed */ + list_for_each_entry(part, &nvram_part->partition, partition) { + if (part->header.signature != NVRAM_SIG_FREE) + continue; + + if (part->header.length >= NVRAM_MAX_REQ) { + size = NVRAM_MAX_REQ; + free_part = part; + break; + } + if (!size && part->header.length >= NVRAM_MIN_REQ) { + size = NVRAM_MIN_REQ; + free_part = part; + } + } + if (!size) + return -ENOSPC; + + /* Create our OS partition */ + new_part = kmalloc(sizeof(*new_part), GFP_KERNEL); + if (!new_part) { + printk(KERN_ERR "nvram_create_os_partition: kmalloc failed\n"); + return -ENOMEM; + } + + new_part->index = free_part->index; + new_part->header.signature = NVRAM_SIG_OS; + new_part->header.length = size; + strcpy(new_part->header.name, "ppc64,linux"); + new_part->header.checksum = nvram_checksum(&new_part->header); + + rc = nvram_write_header(new_part); + if (rc <= 0) { + printk(KERN_ERR "nvram_create_os_partition: nvram_write_header \ + failed (%d)\n", rc); + return rc; + } + + /* make sure and initialize to zero the sequence number and the error + type logged */ + tmp_index = new_part->index + NVRAM_HEADER_LEN; + rc = ppc_md.nvram_write((char *)&seq_init, sizeof(seq_init), &tmp_index); + if (rc <= 0) { + printk(KERN_ERR "nvram_create_os_partition: nvram_write " + "failed (%d)\n", rc); + return rc; + } + + nvram_error_log_index = new_part->index + NVRAM_HEADER_LEN; + nvram_error_log_size = ((part->header.length - 1) * + NVRAM_BLOCK_LEN) - sizeof(struct err_log_info); + + list_add_tail(&new_part->partition, &free_part->partition); + + if (free_part->header.length <= size) { + list_del(&free_part->partition); + kfree(free_part); + return 0; + } + + /* Adjust the partition we stole the space from */ + free_part->index += size * NVRAM_BLOCK_LEN; + free_part->header.length -= size; + free_part->header.checksum = nvram_checksum(&free_part->header); + + rc = nvram_write_header(free_part); + if (rc <= 0) { + printk(KERN_ERR "nvram_create_os_partition: nvram_write_header " + "failed (%d)\n", rc); + return rc; + } + + return 0; +} + + +/* nvram_setup_partition + * + * This will setup the partition we need for buffering the + * error logs and cleanup partitions if needed. + * + * The general strategy is the following: + * 1.) If there is ppc64,linux partition large enough then use it. + * 2.) If there is not a ppc64,linux partition large enough, search + * for a free partition that is large enough. + * 3.) If there is not a free partition large enough remove + * _all_ OS partitions and consolidate the space. + * 4.) Will first try getting a chunk that will satisfy the maximum + * error log size (NVRAM_MAX_REQ). + * 5.) If the max chunk cannot be allocated then try finding a chunk + * that will satisfy the minum needed (NVRAM_MIN_REQ). + */ +static int nvram_setup_partition(void) +{ + struct list_head * p; + struct nvram_partition * part; + int rc; + + /* For now, we don't do any of this on pmac, until I + * have figured out if it's worth killing some unused stuffs + * in our nvram, as Apple defined partitions use pretty much + * all of the space + */ + if (_machine == PLATFORM_POWERMAC) + return -ENOSPC; + + /* see if we have an OS partition that meets our needs. + will try getting the max we need. If not we'll delete + partitions and try again. */ + list_for_each(p, &nvram_part->partition) { + part = list_entry(p, struct nvram_partition, partition); + if (part->header.signature != NVRAM_SIG_OS) + continue; + + if (strcmp(part->header.name, "ppc64,linux")) + continue; + + if (part->header.length >= NVRAM_MIN_REQ) { + /* found our partition */ + nvram_error_log_index = part->index + NVRAM_HEADER_LEN; + nvram_error_log_size = ((part->header.length - 1) * + NVRAM_BLOCK_LEN) - sizeof(struct err_log_info); + return 0; + } + } + + /* try creating a partition with the free space we have */ + rc = nvram_create_os_partition(); + if (!rc) { + return 0; + } + + /* need to free up some space */ + rc = nvram_remove_os_partition(); + if (rc) { + return rc; + } + + /* create a partition in this new space */ + rc = nvram_create_os_partition(); + if (rc) { + printk(KERN_ERR "nvram_create_os_partition: Could not find a " + "NVRAM partition large enough\n"); + return rc; + } + + return 0; +} + + +static int nvram_scan_partitions(void) +{ + loff_t cur_index = 0; + struct nvram_header phead; + struct nvram_partition * tmp_part; + unsigned char c_sum; + char * header; + int total_size; + int err; + + if (ppc_md.nvram_size == NULL) + return -ENODEV; + total_size = ppc_md.nvram_size(); + + header = (char *) kmalloc(NVRAM_HEADER_LEN, GFP_KERNEL); + if (!header) { + printk(KERN_ERR "nvram_scan_partitions: Failed kmalloc\n"); + return -ENOMEM; + } + + while (cur_index < total_size) { + + err = ppc_md.nvram_read(header, NVRAM_HEADER_LEN, &cur_index); + if (err != NVRAM_HEADER_LEN) { + printk(KERN_ERR "nvram_scan_partitions: Error parsing " + "nvram partitions\n"); + goto out; + } + + cur_index -= NVRAM_HEADER_LEN; /* nvram_read will advance us */ + + memcpy(&phead, header, NVRAM_HEADER_LEN); + + err = 0; + c_sum = nvram_checksum(&phead); + if (c_sum != phead.checksum) { + printk(KERN_WARNING "WARNING: nvram partition checksum" + " was %02x, should be %02x!\n", + phead.checksum, c_sum); + printk(KERN_WARNING "Terminating nvram partition scan\n"); + goto out; + } + if (!phead.length) { + printk(KERN_WARNING "WARNING: nvram corruption " + "detected: 0-length partition\n"); + goto out; + } + tmp_part = (struct nvram_partition *) + kmalloc(sizeof(struct nvram_partition), GFP_KERNEL); + err = -ENOMEM; + if (!tmp_part) { + printk(KERN_ERR "nvram_scan_partitions: kmalloc failed\n"); + goto out; + } + + memcpy(&tmp_part->header, &phead, NVRAM_HEADER_LEN); + tmp_part->index = cur_index; + list_add_tail(&tmp_part->partition, &nvram_part->partition); + + cur_index += phead.length * NVRAM_BLOCK_LEN; + } + err = 0; + + out: + kfree(header); + return err; +} + +static int __init nvram_init(void) +{ + int error; + int rc; + + if (ppc_md.nvram_size == NULL || ppc_md.nvram_size() <= 0) + return -ENODEV; + + rc = misc_register(&nvram_dev); + if (rc != 0) { + printk(KERN_ERR "nvram_init: failed to register device\n"); + return rc; + } + + /* initialize our anchor for the nvram partition list */ + nvram_part = (struct nvram_partition *) kmalloc(sizeof(struct nvram_partition), GFP_KERNEL); + if (!nvram_part) { + printk(KERN_ERR "nvram_init: Failed kmalloc\n"); + return -ENOMEM; + } + INIT_LIST_HEAD(&nvram_part->partition); + + /* Get all the NVRAM partitions */ + error = nvram_scan_partitions(); + if (error) { + printk(KERN_ERR "nvram_init: Failed nvram_scan_partitions\n"); + return error; + } + + if(nvram_setup_partition()) + printk(KERN_WARNING "nvram_init: Could not find nvram partition" + " for nvram buffered error logging.\n"); + +#ifdef DEBUG_NVRAM + nvram_print_partitions("NVRAM Partitions"); +#endif + + return rc; +} + +void __exit nvram_cleanup(void) +{ + misc_deregister( &nvram_dev ); +} + + +#ifdef CONFIG_PPC_PSERIES + +/* nvram_write_error_log + * + * We need to buffer the error logs into nvram to ensure that we have + * the failure information to decode. If we have a severe error there + * is no way to guarantee that the OS or the machine is in a state to + * get back to user land and write the error to disk. For example if + * the SCSI device driver causes a Machine Check by writing to a bad + * IO address, there is no way of guaranteeing that the device driver + * is in any state that is would also be able to write the error data + * captured to disk, thus we buffer it in NVRAM for analysis on the + * next boot. + * + * In NVRAM the partition containing the error log buffer will looks like: + * Header (in bytes): + * +-----------+----------+--------+------------+------------------+ + * | signature | checksum | length | name | data | + * |0 |1 |2 3|4 15|16 length-1| + * +-----------+----------+--------+------------+------------------+ + * + * The 'data' section would look like (in bytes): + * +--------------+------------+-----------------------------------+ + * | event_logged | sequence # | error log | + * |0 3|4 7|8 nvram_error_log_size-1| + * +--------------+------------+-----------------------------------+ + * + * event_logged: 0 if event has not been logged to syslog, 1 if it has + * sequence #: The unique sequence # for each event. (until it wraps) + * error log: The error log from event_scan + */ +int nvram_write_error_log(char * buff, int length, unsigned int err_type) +{ + int rc; + loff_t tmp_index; + struct err_log_info info; + + if (no_logging) { + return -EPERM; + } + + if (nvram_error_log_index == -1) { + return -ESPIPE; + } + + if (length > nvram_error_log_size) { + length = nvram_error_log_size; + } + + info.error_type = err_type; + info.seq_num = error_log_cnt; + + tmp_index = nvram_error_log_index; + + rc = ppc_md.nvram_write((char *)&info, sizeof(struct err_log_info), &tmp_index); + if (rc <= 0) { + printk(KERN_ERR "nvram_write_error_log: Failed nvram_write (%d)\n", rc); + return rc; + } + + rc = ppc_md.nvram_write(buff, length, &tmp_index); + if (rc <= 0) { + printk(KERN_ERR "nvram_write_error_log: Failed nvram_write (%d)\n", rc); + return rc; + } + + return 0; +} + +/* nvram_read_error_log + * + * Reads nvram for error log for at most 'length' + */ +int nvram_read_error_log(char * buff, int length, unsigned int * err_type) +{ + int rc; + loff_t tmp_index; + struct err_log_info info; + + if (nvram_error_log_index == -1) + return -1; + + if (length > nvram_error_log_size) + length = nvram_error_log_size; + + tmp_index = nvram_error_log_index; + + rc = ppc_md.nvram_read((char *)&info, sizeof(struct err_log_info), &tmp_index); + if (rc <= 0) { + printk(KERN_ERR "nvram_read_error_log: Failed nvram_read (%d)\n", rc); + return rc; + } + + rc = ppc_md.nvram_read(buff, length, &tmp_index); + if (rc <= 0) { + printk(KERN_ERR "nvram_read_error_log: Failed nvram_read (%d)\n", rc); + return rc; + } + + error_log_cnt = info.seq_num; + *err_type = info.error_type; + + return 0; +} + +/* This doesn't actually zero anything, but it sets the event_logged + * word to tell that this event is safely in syslog. + */ +int nvram_clear_error_log(void) +{ + loff_t tmp_index; + int clear_word = ERR_FLAG_ALREADY_LOGGED; + int rc; + + tmp_index = nvram_error_log_index; + + rc = ppc_md.nvram_write((char *)&clear_word, sizeof(int), &tmp_index); + if (rc <= 0) { + printk(KERN_ERR "nvram_clear_error_log: Failed nvram_write (%d)\n", rc); + return rc; + } + + return 0; +} + +#endif /* CONFIG_PPC_PSERIES */ + +module_init(nvram_init); +module_exit(nvram_cleanup); +MODULE_LICENSE("GPL"); -- cgit v1.2.3 From 6146eed1e972a7de93ce2e36adc5812de81e879c Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Fri, 18 Nov 2005 15:47:18 +1100 Subject: powerpc: Fix compile error on pSeries arising from delay.h changes pseries_dedicated_idle() was using __get_tb which used to be defined in asm/delay.h. Change it to use get_tb from asm/time.h, which is in fact exactly the same thing. Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/pseries/setup.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index b9d9732b2e0..4a465f067ed 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -504,7 +504,7 @@ static void pseries_dedicated_idle(void) lpaca->lppaca.idle = 1; if (!need_resched()) { - start_snooze = __get_tb() + + start_snooze = get_tb() + *smt_snooze_delay * tb_ticks_per_usec; while (!need_resched() && !cpu_is_offline(cpu)) { @@ -518,7 +518,7 @@ static void pseries_dedicated_idle(void) HMT_very_low(); if (*smt_snooze_delay != 0 && - __get_tb() > start_snooze) { + get_tb() > start_snooze) { HMT_medium(); dedicated_idle_sleep(cpu); } -- cgit v1.2.3 From 49e16b7becd6320bde51aa238c11815708f836d9 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Fri, 18 Nov 2005 15:52:38 +1100 Subject: powerpc: time-of-day fixes for 32-bit CHRP systems This makes 32-bit CHRP systems use the RTAS time-of-day routines if available. It fixes a bug in the RTAS time-of-day routines where they were storing a 64-bit timebase value in an unsigned long by making those variables u64. Also, the direct-access time-of-day routines had the wrong convention for the month and year in the struct rtc_time. Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/rtas-rtc.c | 6 +++--- arch/powerpc/platforms/chrp/setup.c | 11 ++++++++++- arch/powerpc/platforms/chrp/time.c | 3 +-- 3 files changed, 14 insertions(+), 6 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/rtas-rtc.c b/arch/powerpc/kernel/rtas-rtc.c index 7b948662704..635d3b9a881 100644 --- a/arch/powerpc/kernel/rtas-rtc.c +++ b/arch/powerpc/kernel/rtas-rtc.c @@ -15,7 +15,7 @@ unsigned long __init rtas_get_boot_time(void) { int ret[8]; int error, wait_time; - unsigned long max_wait_tb; + u64 max_wait_tb; max_wait_tb = get_tb() + tb_ticks_per_usec * 1000 * MAX_RTC_WAIT; do { @@ -45,7 +45,7 @@ void rtas_get_rtc_time(struct rtc_time *rtc_tm) { int ret[8]; int error, wait_time; - unsigned long max_wait_tb; + u64 max_wait_tb; max_wait_tb = get_tb() + tb_ticks_per_usec * 1000 * MAX_RTC_WAIT; do { @@ -80,7 +80,7 @@ void rtas_get_rtc_time(struct rtc_time *rtc_tm) int rtas_set_rtc_time(struct rtc_time *tm) { int error, wait_time; - unsigned long max_wait_tb; + u64 max_wait_tb; max_wait_tb = get_tb() + tb_ticks_per_usec * 1000 * MAX_RTC_WAIT; do { diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c index 4099ddab920..dda5f2c72c2 100644 --- a/arch/powerpc/platforms/chrp/setup.c +++ b/arch/powerpc/platforms/chrp/setup.c @@ -257,6 +257,13 @@ void __init chrp_setup_arch(void) if (rtas_token("display-character") >= 0) ppc_md.progress = rtas_progress; + /* use RTAS time-of-day routines if available */ + if (rtas_token("get-time-of-day") != RTAS_UNKNOWN_SERVICE) { + ppc_md.get_boot_time = rtas_get_boot_time; + ppc_md.get_rtc_time = rtas_get_rtc_time; + ppc_md.set_rtc_time = rtas_set_rtc_time; + } + #ifdef CONFIG_BOOTX_TEXT if (ppc_md.progress == NULL && boot_text_mapped) ppc_md.progress = btext_progress; @@ -505,9 +512,11 @@ void __init chrp_init(void) ppc_md.halt = rtas_halt; ppc_md.time_init = chrp_time_init; + ppc_md.calibrate_decr = chrp_calibrate_decr; + + /* this may get overridden with rtas routines later... */ ppc_md.set_rtc_time = chrp_set_rtc_time; ppc_md.get_rtc_time = chrp_get_rtc_time; - ppc_md.calibrate_decr = chrp_calibrate_decr; #ifdef CONFIG_SMP smp_ops = &chrp_smp_ops; diff --git a/arch/powerpc/platforms/chrp/time.c b/arch/powerpc/platforms/chrp/time.c index 9e53535ddb8..737ee5d9f0a 100644 --- a/arch/powerpc/platforms/chrp/time.c +++ b/arch/powerpc/platforms/chrp/time.c @@ -87,7 +87,6 @@ int chrp_set_rtc_time(struct rtc_time *tmarg) chrp_cmos_clock_write((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT); - tm.tm_year -= 1900; if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) { BIN_TO_BCD(tm.tm_sec); BIN_TO_BCD(tm.tm_min); @@ -156,7 +155,7 @@ void chrp_get_rtc_time(struct rtc_time *tm) BCD_TO_BIN(mon); BCD_TO_BIN(year); } - if ((year += 1900) < 1970) + if (year < 70) year += 100; tm->tm_sec = sec; tm->tm_min = min; -- cgit v1.2.3 From 44aedfe7dedb1ba9f4f9d17f55dec5727f5ff82f Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Fri, 18 Nov 2005 15:54:12 +1100 Subject: powerpc: Fix a couple of compile warnings for 32-bit compiles Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/chrp/smp.c | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/chrp/smp.c b/arch/powerpc/platforms/chrp/smp.c index bb2315997d4..b616053bc33 100644 --- a/arch/powerpc/platforms/chrp/smp.c +++ b/arch/powerpc/platforms/chrp/smp.c @@ -34,6 +34,7 @@ #include #include #include +#include static void __devinit smp_chrp_kick_cpu(int nr) { -- cgit v1.2.3 From 8a5abdf80ecf3ad3fa052878778c7185c5911a53 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Fri, 18 Nov 2005 16:39:08 +1100 Subject: powerpc: Move defconfig over and remove remaining arch/ppc64 files make defconfig will now use arch/powerpc/configs/ppc64_defconfig if running on a ppc64 system. I need to add an arch/powerpc/configs/ppc_defconfig sometime. Signed-off-by: Paul Mackerras --- arch/powerpc/Makefile | 5 +- arch/powerpc/configs/ppc64_defconfig | 1579 ++++++++++++++++++++++++++++++++++ 2 files changed, 1581 insertions(+), 3 deletions(-) create mode 100644 arch/powerpc/configs/ppc64_defconfig (limited to 'arch/powerpc') diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index 987036b60c8..98f67c78d1b 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -33,6 +33,8 @@ endif export CROSS32CC CROSS32AS CROSS32LD CROSS32OBJCOPY +KBUILD_DEFCONFIG := $(shell uname -m)_defconfig + ifeq ($(CONFIG_PPC64),y) OLDARCH := ppc64 SZ := 64 @@ -111,9 +113,6 @@ cpu-as-$(CONFIG_E200) += -Wa,-me200 AFLAGS += $(cpu-as-y) CFLAGS += $(cpu-as-y) -# Default to the common case. -KBUILD_DEFCONFIG := common_defconfig - head-y := arch/powerpc/kernel/head_32.o head-$(CONFIG_PPC64) := arch/powerpc/kernel/head_64.o head-$(CONFIG_8xx) := arch/powerpc/kernel/head_8xx.o diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig new file mode 100644 index 00000000000..b5ba3bbd96f --- /dev/null +++ b/arch/powerpc/configs/ppc64_defconfig @@ -0,0 +1,1579 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.15-rc1 +# Fri Nov 18 16:23:24 2005 +# +CONFIG_PPC64=y +CONFIG_64BIT=y +CONFIG_PPC_MERGE=y +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_COMPAT=y +CONFIG_SYSVIPC_COMPAT=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y + +# +# Processor support +# +# CONFIG_POWER4_ONLY is not set +CONFIG_POWER3=y +CONFIG_POWER4=y +CONFIG_PPC_FPU=y +CONFIG_ALTIVEC=y +CONFIG_PPC_STD_MMU=y +CONFIG_SMP=y +CONFIG_NR_CPUS=32 + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +CONFIG_HOTPLUG=y +CONFIG_KOBJECT_UEVENT=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_CPUSETS=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_EMBEDDED is not set +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_KMOD=y +CONFIG_STOP_MACHINE=y + +# +# Block layer +# + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# Platform support +# +CONFIG_PPC_MULTIPLATFORM=y +# CONFIG_PPC_ISERIES is not set +# CONFIG_EMBEDDED6xx is not set +# CONFIG_APUS is not set +CONFIG_PPC_PSERIES=y +CONFIG_PPC_PMAC=y +CONFIG_PPC_PMAC64=y +CONFIG_PPC_MAPLE=y +# CONFIG_PPC_CELL is not set +CONFIG_PPC_OF=y +CONFIG_XICS=y +CONFIG_U3_DART=y +CONFIG_MPIC=y +CONFIG_PPC_RTAS=y +CONFIG_RTAS_ERROR_LOGGING=y +CONFIG_RTAS_PROC=y +CONFIG_RTAS_FLASH=m +# CONFIG_MMIO_NVRAM is not set +CONFIG_MPIC_BROKEN_U3=y +CONFIG_IBMVIO=y +# CONFIG_PPC_MPC106 is not set +CONFIG_GENERIC_TBSYNC=y +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_TABLE=y +# CONFIG_CPU_FREQ_DEBUG is not set +CONFIG_CPU_FREQ_STAT=y +# CONFIG_CPU_FREQ_STAT_DETAILS is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +CONFIG_CPU_FREQ_GOV_POWERSAVE=y +CONFIG_CPU_FREQ_GOV_USERSPACE=y +# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_PMAC64=y +# CONFIG_WANT_EARLY_SERIAL is not set + +# +# Kernel options +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +# CONFIG_PREEMPT_BKL is not set +CONFIG_BINFMT_ELF=y +CONFIG_BINFMT_MISC=m +CONFIG_FORCE_MAX_ZONEORDER=13 +CONFIG_IOMMU_VMERGE=y +CONFIG_HOTPLUG_CPU=y +CONFIG_KEXEC=y +CONFIG_IRQ_ALL_CPUS=y +CONFIG_PPC_SPLPAR=y +CONFIG_EEH=y +CONFIG_SCANLOG=m +CONFIG_LPARCFG=y +# CONFIG_NUMA is not set +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_SELECT_MEMORY_MODEL=y +# CONFIG_FLATMEM_MANUAL is not set +# CONFIG_DISCONTIGMEM_MANUAL is not set +CONFIG_SPARSEMEM_MANUAL=y +CONFIG_SPARSEMEM=y +CONFIG_HAVE_MEMORY_PRESENT=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPARSEMEM_EXTREME=y +# CONFIG_MEMORY_HOTPLUG is not set +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PPC_64K_PAGES is not set +# CONFIG_SCHED_SMT is not set +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_GENERIC_ISA_DMA=y +CONFIG_PPC_I8259=y +# CONFIG_PPC_INDIRECT_PCI is not set +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +# CONFIG_PCI_LEGACY_PROC is not set +# CONFIG_PCI_DEBUG is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# +CONFIG_HOTPLUG_PCI=m +# CONFIG_HOTPLUG_PCI_FAKE is not set +# CONFIG_HOTPLUG_PCI_CPCI is not set +# CONFIG_HOTPLUG_PCI_SHPC is not set +CONFIG_HOTPLUG_PCI_RPA=m +CONFIG_HOTPLUG_PCI_RPA_DLPAR=m +CONFIG_KERNEL_START=0xc000000000000000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=m +CONFIG_NET_KEY=m +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +CONFIG_NET_IPIP=y +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_TUNNEL=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y + +# +# IP: Virtual Server Configuration +# +# CONFIG_IP_VS is not set +# CONFIG_IPV6 is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# +CONFIG_NETFILTER_NETLINK=y +CONFIG_NETFILTER_NETLINK_QUEUE=m +CONFIG_NETFILTER_NETLINK_LOG=m + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_CONNTRACK=m +CONFIG_IP_NF_CT_ACCT=y +CONFIG_IP_NF_CONNTRACK_MARK=y +CONFIG_IP_NF_CONNTRACK_EVENTS=y +CONFIG_IP_NF_CONNTRACK_NETLINK=m +CONFIG_IP_NF_CT_PROTO_SCTP=m +CONFIG_IP_NF_FTP=m +CONFIG_IP_NF_IRC=m +# CONFIG_IP_NF_NETBIOS_NS is not set +CONFIG_IP_NF_TFTP=m +CONFIG_IP_NF_AMANDA=m +# CONFIG_IP_NF_PPTP is not set +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_LIMIT=m +CONFIG_IP_NF_MATCH_IPRANGE=m +CONFIG_IP_NF_MATCH_MAC=m +CONFIG_IP_NF_MATCH_PKTTYPE=m +CONFIG_IP_NF_MATCH_MARK=m +CONFIG_IP_NF_MATCH_MULTIPORT=m +CONFIG_IP_NF_MATCH_TOS=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_DSCP=m +CONFIG_IP_NF_MATCH_AH_ESP=m +CONFIG_IP_NF_MATCH_LENGTH=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_TCPMSS=m +CONFIG_IP_NF_MATCH_HELPER=m +CONFIG_IP_NF_MATCH_STATE=m +CONFIG_IP_NF_MATCH_CONNTRACK=m +CONFIG_IP_NF_MATCH_OWNER=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_MATCH_REALM=m +CONFIG_IP_NF_MATCH_SCTP=m +CONFIG_IP_NF_MATCH_DCCP=m +CONFIG_IP_NF_MATCH_COMMENT=m +CONFIG_IP_NF_MATCH_CONNMARK=m +CONFIG_IP_NF_MATCH_CONNBYTES=m +CONFIG_IP_NF_MATCH_HASHLIMIT=m +CONFIG_IP_NF_MATCH_STRING=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_IP_NF_TARGET_TCPMSS=m +CONFIG_IP_NF_TARGET_NFQUEUE=m +CONFIG_IP_NF_NAT=m +CONFIG_IP_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_SAME=m +CONFIG_IP_NF_NAT_SNMP_BASIC=m +CONFIG_IP_NF_NAT_IRC=m +CONFIG_IP_NF_NAT_FTP=m +CONFIG_IP_NF_NAT_TFTP=m +CONFIG_IP_NF_NAT_AMANDA=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_TOS=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_DSCP=m +CONFIG_IP_NF_TARGET_MARK=m +CONFIG_IP_NF_TARGET_CLASSIFY=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_TARGET_CONNMARK=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_TARGET_NOTRACK=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +CONFIG_LLC=y +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set +CONFIG_NET_CLS_ROUTE=y + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +CONFIG_BLK_DEV_FD=y +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +CONFIG_BLK_DEV_NBD=m +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=65536 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_BLK_DEV_IDECD=y +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_BLK_DEV_IDESCSI is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_IDEPCI=y +CONFIG_IDEPCI_SHARE_IRQ=y +# CONFIG_BLK_DEV_OFFBOARD is not set +CONFIG_BLK_DEV_GENERIC=y +# CONFIG_BLK_DEV_OPTI621 is not set +# CONFIG_BLK_DEV_SL82C105 is not set +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_IDEDMA_FORCED is not set +CONFIG_IDEDMA_PCI_AUTO=y +# CONFIG_IDEDMA_ONLYDISK is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +CONFIG_BLK_DEV_AMD74XX=y +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +CONFIG_BLK_DEV_IDE_PMAC=y +CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y +CONFIG_BLK_DEV_IDEDMA_PMAC=y +# CONFIG_BLK_DEV_IDE_PMAC_BLINK is not set +# CONFIG_IDE_ARM is not set +CONFIG_BLK_DEV_IDEDMA=y +# CONFIG_IDEDMA_IVB is not set +CONFIG_IDEDMA_AUTO=y +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_ST=y +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=y +CONFIG_BLK_DEV_SR_VENDOR=y +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +CONFIG_SCSI_CONSTANTS=y +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transport Attributes +# +CONFIG_SCSI_SPI_ATTRS=y +CONFIG_SCSI_FC_ATTRS=y +CONFIG_SCSI_ISCSI_ATTRS=m +# CONFIG_SCSI_SAS_ATTRS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +CONFIG_SCSI_SATA=y +# CONFIG_SCSI_SATA_AHCI is not set +CONFIG_SCSI_SATA_SVW=y +# CONFIG_SCSI_ATA_PIIX is not set +# CONFIG_SCSI_SATA_MV is not set +# CONFIG_SCSI_SATA_NV is not set +# CONFIG_SCSI_PDC_ADMA is not set +# CONFIG_SCSI_SATA_QSTOR is not set +# CONFIG_SCSI_SATA_PROMISE is not set +# CONFIG_SCSI_SATA_SX4 is not set +# CONFIG_SCSI_SATA_SIL is not set +# CONFIG_SCSI_SATA_SIL24 is not set +# CONFIG_SCSI_SATA_SIS is not set +# CONFIG_SCSI_SATA_ULI is not set +# CONFIG_SCSI_SATA_VIA is not set +# CONFIG_SCSI_SATA_VITESSE is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +CONFIG_SCSI_IBMVSCSI=y +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +CONFIG_SCSI_SYM53C8XX_2=y +CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0 +CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 +CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 +# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set +CONFIG_SCSI_IPR=y +CONFIG_SCSI_IPR_TRACE=y +CONFIG_SCSI_IPR_DUMP=y +# CONFIG_SCSI_QLOGIC_FC is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +CONFIG_SCSI_QLA2XXX=y +CONFIG_SCSI_QLA21XX=m +CONFIG_SCSI_QLA22XX=m +CONFIG_SCSI_QLA2300=m +CONFIG_SCSI_QLA2322=m +CONFIG_SCSI_QLA6312=m +CONFIG_SCSI_QLA24XX=m +CONFIG_SCSI_LPFC=m +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +CONFIG_SCSI_DEBUG=m + +# +# Multi-device support (RAID and LVM) +# +CONFIG_MD=y +CONFIG_BLK_DEV_MD=y +CONFIG_MD_LINEAR=y +CONFIG_MD_RAID0=y +CONFIG_MD_RAID1=y +CONFIG_MD_RAID10=y +CONFIG_MD_RAID5=y +CONFIG_MD_RAID6=m +CONFIG_MD_MULTIPATH=m +CONFIG_MD_FAULTY=m +CONFIG_BLK_DEV_DM=y +CONFIG_DM_CRYPT=m +CONFIG_DM_SNAPSHOT=m +CONFIG_DM_MIRROR=m +CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +CONFIG_DM_MULTIPATH_EMC=m + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set + +# +# IEEE 1394 (FireWire) support +# +CONFIG_IEEE1394=y + +# +# Subsystem Options +# +# CONFIG_IEEE1394_VERBOSEDEBUG is not set +# CONFIG_IEEE1394_OUI_DB is not set +CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y +CONFIG_IEEE1394_CONFIG_ROM_IP1394=y +# CONFIG_IEEE1394_EXPORT_FULL_API is not set + +# +# Device Drivers +# +# CONFIG_IEEE1394_PCILYNX is not set +CONFIG_IEEE1394_OHCI1394=y + +# +# Protocol Drivers +# +CONFIG_IEEE1394_VIDEO1394=m +CONFIG_IEEE1394_SBP2=m +# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set +CONFIG_IEEE1394_ETH1394=m +CONFIG_IEEE1394_DV1394=m +CONFIG_IEEE1394_RAWIO=y +CONFIG_IEEE1394_CMP=m +CONFIG_IEEE1394_AMDTP=m + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Macintosh device drivers +# +CONFIG_ADB_PMU=y +CONFIG_PMAC_SMU=y +CONFIG_THERM_PM72=y +CONFIG_WINDFARM=y +CONFIG_WINDFARM_PM81=y +CONFIG_WINDFARM_PM91=y + +# +# Network device support +# +CONFIG_NETDEVICES=y +CONFIG_DUMMY=m +CONFIG_BONDING=m +# CONFIG_EQUALIZER is not set +CONFIG_TUN=m + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +CONFIG_SUNGEM=y +# CONFIG_CASSINI is not set +CONFIG_NET_VENDOR_3COM=y +CONFIG_VORTEX=y +# CONFIG_TYPHOON is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_IBMVETH=m +CONFIG_NET_PCI=y +CONFIG_PCNET32=y +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +CONFIG_E100=y +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_VIA_RHINE is not set + +# +# Ethernet (1000 Mbit) +# +CONFIG_ACENIC=y +CONFIG_ACENIC_OMIT_TIGON_I=y +# CONFIG_DL2K is not set +CONFIG_E1000=y +# CONFIG_E1000_NAPI is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +CONFIG_TIGON3=y +# CONFIG_BNX2 is not set +# CONFIG_MV643XX_ETH is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +CONFIG_IXGB=m +# CONFIG_IXGB_NAPI is not set +# CONFIG_S2IO is not set + +# +# Token Ring devices +# +CONFIG_TR=y +CONFIG_IBMOL=y +# CONFIG_3C359 is not set +# CONFIG_TMS380TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +CONFIG_PPP=m +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +# CONFIG_PPP_MPPE is not set +CONFIG_PPPOE=m +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +CONFIG_NETCONSOLE=y +CONFIG_NETPOLL=y +CONFIG_NETPOLL_RX=y +CONFIG_NETPOLL_TRAP=y +CONFIG_NET_POLL_CONTROLLER=y + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +CONFIG_INPUT_EVDEV=m +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +CONFIG_INPUT_MISC=y +CONFIG_INPUT_PCSPKR=m +# CONFIG_INPUT_UINPUT is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_I8042=y +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_PMACZILOG is not set +CONFIG_SERIAL_ICOM=m +CONFIG_SERIAL_JSM=m +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +CONFIG_HVC_CONSOLE=y +CONFIG_HVCS=m + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_RTC is not set +# CONFIG_GEN_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +CONFIG_RAW_DRIVER=y +CONFIG_MAX_RAW_DEVS=256 +# CONFIG_HANGCHECK_TIMER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=y +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +CONFIG_I2C_AMD8111=y +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +CONFIG_I2C_KEYWEST=y +CONFIG_I2C_PMAC_SMU=y +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_SCx200_ACB is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_RTC_X1205_I2C is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +CONFIG_FB_MACMODES=y +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_TILEBLITTING=y +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +CONFIG_FB_OF=y +# CONFIG_FB_CONTROL is not set +# CONFIG_FB_PLATINUM is not set +# CONFIG_FB_VALKYRIE is not set +# CONFIG_FB_CT65550 is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_VGA16 is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +CONFIG_FB_MATROX=y +CONFIG_FB_MATROX_MILLENIUM=y +CONFIG_FB_MATROX_MYSTIQUE=y +CONFIG_FB_MATROX_G=y +CONFIG_FB_MATROX_I2C=m +CONFIG_FB_MATROX_MAVEN=m +CONFIG_FB_MATROX_MULTIHEAD=y +# CONFIG_FB_RADEON_OLD is not set +CONFIG_FB_RADEON=y +CONFIG_FB_RADEON_I2C=y +# CONFIG_FB_RADEON_DEBUG is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_CYBLA is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y + +# +# Logo configuration +# +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_DEVICE=y +CONFIG_LCD_CLASS_DEVICE=y +CONFIG_LCD_DEVICE=y + +# +# Sound +# +CONFIG_SOUND=m + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +CONFIG_SND_SEQUENCER=m +CONFIG_SND_SEQ_DUMMY=m +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_SEQUENCER_OSS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +CONFIG_SND_GENERIC_DRIVER=y + +# +# Generic devices +# +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_VIRMIDI is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# PCI devices +# +# CONFIG_SND_ALI5451 is not set +# CONFIG_SND_ATIIXP is not set +# CONFIG_SND_ATIIXP_MODEM is not set +# CONFIG_SND_AU8810 is not set +# CONFIG_SND_AU8820 is not set +# CONFIG_SND_AU8830 is not set +# CONFIG_SND_AZT3328 is not set +# CONFIG_SND_BT87X is not set +# CONFIG_SND_CS46XX is not set +# CONFIG_SND_CS4281 is not set +# CONFIG_SND_EMU10K1 is not set +# CONFIG_SND_EMU10K1X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set +# CONFIG_SND_TRIDENT is not set +# CONFIG_SND_YMFPCI is not set +# CONFIG_SND_AD1889 is not set +# CONFIG_SND_ALS4000 is not set +# CONFIG_SND_CMIPCI is not set +# CONFIG_SND_ENS1370 is not set +# CONFIG_SND_ENS1371 is not set +# CONFIG_SND_ES1938 is not set +# CONFIG_SND_ES1968 is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_FM801 is not set +# CONFIG_SND_ICE1712 is not set +# CONFIG_SND_ICE1724 is not set +# CONFIG_SND_INTEL8X0 is not set +# CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VX222 is not set +# CONFIG_SND_HDA_INTEL is not set + +# +# ALSA PowerMac devices +# +CONFIG_SND_POWERMAC=m +CONFIG_SND_POWERMAC_AUTO_DRC=y + +# +# USB devices +# +# CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_USX2Y is not set + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_BANDWIDTH is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_EHCI_SPLIT_ISO is not set +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=m +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +CONFIG_USB_HIDINPUT=y +# CONFIG_HID_FF is not set +CONFIG_USB_HIDDEV=y +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_MTOUCH is not set +# CONFIG_USB_ITMTOUCH is not set +# CONFIG_USB_EGALAX is not set +# CONFIG_USB_YEALINK is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB Multimedia devices +# +# CONFIG_USB_DABUSB is not set + +# +# Video4Linux support is needed for USB Multimedia device support +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_USB_MON is not set + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGETKIT is not set +# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +CONFIG_INFINIBAND=m +# CONFIG_INFINIBAND_USER_MAD is not set +# CONFIG_INFINIBAND_USER_ACCESS is not set +CONFIG_INFINIBAND_MTHCA=m +# CONFIG_INFINIBAND_MTHCA_DEBUG is not set +CONFIG_INFINIBAND_IPOIB=m +# CONFIG_INFINIBAND_IPOIB_DEBUG is not set +# CONFIG_INFINIBAND_SRP is not set + +# +# SN Devices +# + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +CONFIG_EXT2_FS_XIP=y +CONFIG_FS_XIP=y +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +CONFIG_REISERFS_FS=y +# CONFIG_REISERFS_CHECK is not set +# CONFIG_REISERFS_PROC_INFO is not set +CONFIG_REISERFS_FS_XATTR=y +CONFIG_REISERFS_FS_POSIX_ACL=y +CONFIG_REISERFS_FS_SECURITY=y +CONFIG_JFS_FS=y +CONFIG_JFS_POSIX_ACL=y +CONFIG_JFS_SECURITY=y +# CONFIG_JFS_DEBUG is not set +# CONFIG_JFS_STATISTICS is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_XFS_FS=m +CONFIG_XFS_EXPORT=y +# CONFIG_XFS_QUOTA is not set +CONFIG_XFS_SECURITY=y +CONFIG_XFS_POSIX_ACL=y +# CONFIG_XFS_RT is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +CONFIG_AUTOFS_FS=y +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=y +# CONFIG_JOLIET is not set +# CONFIG_ZISOFS is not set +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +CONFIG_HUGETLBFS=y +CONFIG_HUGETLB_PAGE=y +CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +CONFIG_HFS_FS=m +CONFIG_HFSPLUS_FS=m +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +# CONFIG_NFS_DIRECTIO is not set +CONFIG_NFSD=m +CONFIG_NFSD_V2_ACL=y +CONFIG_NFSD_V3=y +CONFIG_NFSD_V3_ACL=y +CONFIG_NFSD_V4=y +CONFIG_NFSD_TCP=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_ACL_SUPPORT=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +CONFIG_RPCSEC_GSS_SPKM3=m +# CONFIG_SMB_FS is not set +CONFIG_CIFS=m +# CONFIG_CIFS_STATS is not set +CONFIG_CIFS_XATTR=y +CONFIG_CIFS_POSIX=y +# CONFIG_CIFS_EXPERIMENTAL is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +CONFIG_MAC_PARTITION=y +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_UTF8=m + +# +# Library routines +# +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m + +# +# Instrumentation Support +# +CONFIG_PROFILING=y +CONFIG_OPROFILE=y +# CONFIG_KPROBES is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=17 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_INFO is not set +CONFIG_DEBUG_FS=y +# CONFIG_DEBUG_VM is not set +# CONFIG_RCU_TORTURE_TEST is not set +CONFIG_DEBUG_STACKOVERFLOW=y +CONFIG_DEBUG_STACK_USAGE=y +CONFIG_DEBUGGER=y +CONFIG_XMON=y +# CONFIG_XMON_DEFAULT is not set +CONFIG_IRQSTACKS=y +CONFIG_BOOTX_TEXT=y + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_TEST=m + +# +# Hardware crypto devices +# -- cgit v1.2.3