From e30c98758453d743fab00e45da0eac6fc581958a Mon Sep 17 00:00:00 2001 From: Tirumala R Marri Date: Thu, 21 Aug 2008 18:53:34 +0000 Subject: powerpc/44x: AMCC PPC460GT/EX PCI-E de-emphasis adjustment fix During recent tests with PCI-E , it has been found the DRV + De-Emphasis values are not optimum. These new values are tested thouroughly. Signed-off-by: Tirumala R Marri Signed-off-by: Feng Kan fkan@amcc.com Acked-by: Stefan Roese Signed-off-by: Josh Boyer --- arch/powerpc/sysdev/ppc4xx_pci.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/sysdev/ppc4xx_pci.c b/arch/powerpc/sysdev/ppc4xx_pci.c index fb368dfde5d..d5c345dbb89 100644 --- a/arch/powerpc/sysdev/ppc4xx_pci.c +++ b/arch/powerpc/sysdev/ppc4xx_pci.c @@ -810,7 +810,7 @@ static int ppc460ex_pciex_init_port_hw(struct ppc4xx_pciex_port *port) switch (port->index) { case 0: mtdcri(SDR0, PESDR0_460EX_L0CDRCTL, 0x00003230); - mtdcri(SDR0, PESDR0_460EX_L0DRV, 0x00000136); + mtdcri(SDR0, PESDR0_460EX_L0DRV, 0x00000130); mtdcri(SDR0, PESDR0_460EX_L0CLK, 0x00000006); mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST,0x10000000); @@ -821,10 +821,10 @@ static int ppc460ex_pciex_init_port_hw(struct ppc4xx_pciex_port *port) mtdcri(SDR0, PESDR1_460EX_L1CDRCTL, 0x00003230); mtdcri(SDR0, PESDR1_460EX_L2CDRCTL, 0x00003230); mtdcri(SDR0, PESDR1_460EX_L3CDRCTL, 0x00003230); - mtdcri(SDR0, PESDR1_460EX_L0DRV, 0x00000136); - mtdcri(SDR0, PESDR1_460EX_L1DRV, 0x00000136); - mtdcri(SDR0, PESDR1_460EX_L2DRV, 0x00000136); - mtdcri(SDR0, PESDR1_460EX_L3DRV, 0x00000136); + mtdcri(SDR0, PESDR1_460EX_L0DRV, 0x00000130); + mtdcri(SDR0, PESDR1_460EX_L1DRV, 0x00000130); + mtdcri(SDR0, PESDR1_460EX_L2DRV, 0x00000130); + mtdcri(SDR0, PESDR1_460EX_L3DRV, 0x00000130); mtdcri(SDR0, PESDR1_460EX_L0CLK, 0x00000006); mtdcri(SDR0, PESDR1_460EX_L1CLK, 0x00000006); mtdcri(SDR0, PESDR1_460EX_L2CLK, 0x00000006); -- cgit v1.2.3 From 775d5a110b8a0bc9a0ccf3b831a8991b6c1d84dd Mon Sep 17 00:00:00 2001 From: Josh Boyer Date: Tue, 19 Aug 2008 11:25:15 -0400 Subject: powerpc/44x: Add PowerPC 44x simple platform support This adds a common board file for almost all of the "simple" PowerPC 44x boards that exist today. This is intended to be a single place to add support for boards that do not differ in platform support from most of the evaluation boards that are used as reference platforms. Boards that have specific requirements or custom hardware setup should still have their own board.c file. Signed-off-by: Josh Boyer --- arch/powerpc/platforms/44x/Kconfig | 7 +++ arch/powerpc/platforms/44x/Makefile | 1 + arch/powerpc/platforms/44x/ppc44x_simple.c | 85 ++++++++++++++++++++++++++++++ 3 files changed, 93 insertions(+) create mode 100644 arch/powerpc/platforms/44x/ppc44x_simple.c (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig index 249ba01c667..97c634c8f9d 100644 --- a/arch/powerpc/platforms/44x/Kconfig +++ b/arch/powerpc/platforms/44x/Kconfig @@ -127,6 +127,13 @@ config XILINX_VIRTEX440_GENERIC_BOARD Most Virtex 5 designs should use this unless it needs to do some special configuration at board probe time. +config PPC44x_SIMPLE + bool "Simple PowerPC 44x board support" + depends on 44x + default n + help + This option enables the simple PowerPC 44x platform support. + # 44x specific CPU modules, selected based on the board above. config 440EP bool diff --git a/arch/powerpc/platforms/44x/Makefile b/arch/powerpc/platforms/44x/Makefile index 8d0b1a192d6..73c1df5bc05 100644 --- a/arch/powerpc/platforms/44x/Makefile +++ b/arch/powerpc/platforms/44x/Makefile @@ -1,4 +1,5 @@ obj-$(CONFIG_44x) := misc_44x.o idle.o +obj-$(CONFIG_PPC44x_SIMPLE) += ppc44x_simple.o obj-$(CONFIG_EBONY) += ebony.o obj-$(CONFIG_TAISHAN) += taishan.o obj-$(CONFIG_BAMBOO) += bamboo.o diff --git a/arch/powerpc/platforms/44x/ppc44x_simple.c b/arch/powerpc/platforms/44x/ppc44x_simple.c new file mode 100644 index 00000000000..32b0535f29f --- /dev/null +++ b/arch/powerpc/platforms/44x/ppc44x_simple.c @@ -0,0 +1,85 @@ +/* + * Generic PowerPC 44x platform support + * + * Copyright 2008 IBM Corporation + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; version 2 of the License. + * + * This implements simple platform support for PowerPC 44x chips. This is + * mostly used for eval boards or other simple and "generic" 44x boards. If + * your board has custom functions or hardware, then you will likely want to + * implement your own board.c file to accommodate it. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +static __initdata struct of_device_id ppc44x_of_bus[] = { + { .compatible = "ibm,plb4", }, + { .compatible = "ibm,opb", }, + { .compatible = "ibm,ebc", }, + { .compatible = "simple-bus", }, + {}, +}; + +static int __init ppc44x_device_probe(void) +{ + of_platform_bus_probe(NULL, ppc44x_of_bus, NULL); + + return 0; +} +machine_device_initcall(ppc44x_simple, ppc44x_device_probe); + +/* This is the list of boards that can be supported by this simple + * platform code. This does _not_ mean the boards are compatible, + * as they most certainly are not from a device tree perspective. + * However, their differences are handled by the device tree and the + * drivers and therefore they don't need custom board support files. + * + * Again, if your board needs to do things differently then create a + * board.c file for it rather than adding it to this list. + */ +static char *board[] __initdata = { + "amcc,bamboo", + "amcc,cayonlands", + "ibm,ebony", + "amcc,katmai", + "amcc,rainier", + "amcc,sequoia", + "amcc,taishan" +}; + +static int __init ppc44x_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + int i = 0; + + for (i = 0; i < ARRAY_SIZE(board); i++) { + if (of_flat_dt_is_compatible(root, board[i])) { + ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC; + return 1; + } + } + + return 0; +} + +define_machine(ppc44x_simple) { + .name = "PowerPC 44x Platform", + .probe = ppc44x_probe, + .progress = udbg_progress, + .init_IRQ = uic_init_tree, + .get_irq = uic_get_irq, + .restart = ppc4xx_reset_system, + .calibrate_decr = generic_calibrate_decr, +}; -- cgit v1.2.3 From 380c313ab301e9d35ead5cd9ead737682eba304b Mon Sep 17 00:00:00 2001 From: Josh Boyer Date: Tue, 19 Aug 2008 11:26:24 -0400 Subject: powerpc/44x: Migrate Bamboo support to ppc44x_simple Migrate the AMCC Bamboo board to use the ppc44x_simple platform file. Signed-off-by: Josh Boyer --- arch/powerpc/platforms/44x/Kconfig | 2 ++ arch/powerpc/platforms/44x/Makefile | 2 -- arch/powerpc/platforms/44x/bamboo.c | 62 ------------------------------------- 3 files changed, 2 insertions(+), 64 deletions(-) delete mode 100644 arch/powerpc/platforms/44x/bamboo.c (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig index 97c634c8f9d..0958285e110 100644 --- a/arch/powerpc/platforms/44x/Kconfig +++ b/arch/powerpc/platforms/44x/Kconfig @@ -2,6 +2,7 @@ config BAMBOO bool "Bamboo" depends on 44x default n + select PPC44x_SIMPLE select 440EP select PCI help @@ -90,6 +91,7 @@ config YOSEMITE bool "Yosemite" depends on 44x default n + select PPC44x_SIMPLE select 440EP select PCI help diff --git a/arch/powerpc/platforms/44x/Makefile b/arch/powerpc/platforms/44x/Makefile index 73c1df5bc05..ca18a326f67 100644 --- a/arch/powerpc/platforms/44x/Makefile +++ b/arch/powerpc/platforms/44x/Makefile @@ -2,8 +2,6 @@ obj-$(CONFIG_44x) := misc_44x.o idle.o obj-$(CONFIG_PPC44x_SIMPLE) += ppc44x_simple.o obj-$(CONFIG_EBONY) += ebony.o obj-$(CONFIG_TAISHAN) += taishan.o -obj-$(CONFIG_BAMBOO) += bamboo.o -obj-$(CONFIG_YOSEMITE) += bamboo.o obj-$(CONFIG_SAM440EP) += sam440ep.o obj-$(CONFIG_SEQUOIA) += sequoia.o obj-$(CONFIG_KATMAI) += katmai.o diff --git a/arch/powerpc/platforms/44x/bamboo.c b/arch/powerpc/platforms/44x/bamboo.c deleted file mode 100644 index cef169e9515..00000000000 --- a/arch/powerpc/platforms/44x/bamboo.c +++ /dev/null @@ -1,62 +0,0 @@ -/* - * Bamboo board specific routines - * - * Wade Farnsworth - * Copyright 2004 MontaVista Software Inc. - * - * Rewritten and ported to the merged powerpc tree: - * Josh Boyer - * Copyright 2007 IBM Corporation - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#include -#include - -#include -#include -#include -#include -#include -#include -#include - -static __initdata struct of_device_id bamboo_of_bus[] = { - { .compatible = "ibm,plb4", }, - { .compatible = "ibm,opb", }, - { .compatible = "ibm,ebc", }, - {}, -}; - -static int __init bamboo_device_probe(void) -{ - of_platform_bus_probe(NULL, bamboo_of_bus, NULL); - - return 0; -} -machine_device_initcall(bamboo, bamboo_device_probe); - -static int __init bamboo_probe(void) -{ - unsigned long root = of_get_flat_dt_root(); - - if (!of_flat_dt_is_compatible(root, "amcc,bamboo")) - return 0; - - ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC; - - return 1; -} - -define_machine(bamboo) { - .name = "Bamboo", - .probe = bamboo_probe, - .progress = udbg_progress, - .init_IRQ = uic_init_tree, - .get_irq = uic_get_irq, - .restart = ppc4xx_reset_system, - .calibrate_decr = generic_calibrate_decr, -}; -- cgit v1.2.3 From aaf136c29d7b1dd505256c26a191ef1ad5f0a448 Mon Sep 17 00:00:00 2001 From: Josh Boyer Date: Tue, 19 Aug 2008 11:26:35 -0400 Subject: powerpc/44x: Migrate Canyonlands support to ppc44x_simple Migrate the AMCC Canyonlands board to use the ppc44x_simple platform file. Signed-off-by: Josh Boyer --- arch/powerpc/platforms/44x/Kconfig | 1 + arch/powerpc/platforms/44x/Makefile | 1 - arch/powerpc/platforms/44x/canyonlands.c | 63 -------------------------------- 3 files changed, 1 insertion(+), 64 deletions(-) delete mode 100644 arch/powerpc/platforms/44x/canyonlands.c (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig index 0958285e110..92ba2d87f2f 100644 --- a/arch/powerpc/platforms/44x/Kconfig +++ b/arch/powerpc/platforms/44x/Kconfig @@ -81,6 +81,7 @@ config CANYONLANDS bool "Canyonlands" depends on 44x default n + select PPC44x_SIMPLE select 460EX select PCI select PPC4xx_PCI_EXPRESS diff --git a/arch/powerpc/platforms/44x/Makefile b/arch/powerpc/platforms/44x/Makefile index ca18a326f67..0ab626d4795 100644 --- a/arch/powerpc/platforms/44x/Makefile +++ b/arch/powerpc/platforms/44x/Makefile @@ -8,5 +8,4 @@ obj-$(CONFIG_KATMAI) += katmai.o obj-$(CONFIG_RAINIER) += rainier.o obj-$(CONFIG_WARP) += warp.o obj-$(CONFIG_WARP) += warp-nand.o -obj-$(CONFIG_CANYONLANDS) += canyonlands.o obj-$(CONFIG_XILINX_VIRTEX_5_FXT) += virtex.o diff --git a/arch/powerpc/platforms/44x/canyonlands.c b/arch/powerpc/platforms/44x/canyonlands.c deleted file mode 100644 index 3949289f51d..00000000000 --- a/arch/powerpc/platforms/44x/canyonlands.c +++ /dev/null @@ -1,63 +0,0 @@ -/* - * Canyonlands board specific routines - * - * Copyright 2008 DENX Software Engineering, Stefan Roese - * - * Based on the Katmai code by - * Benjamin Herrenschmidt - * Copyright 2007 IBM Corp. - * Josh Boyer - * Copyright 2007 IBM Corporation - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#include -#include - -#include -#include -#include -#include -#include -#include -#include - -static __initdata struct of_device_id canyonlands_of_bus[] = { - { .compatible = "ibm,plb4", }, - { .compatible = "ibm,opb", }, - { .compatible = "ibm,ebc", }, - {}, -}; - -static int __init canyonlands_device_probe(void) -{ - of_platform_bus_probe(NULL, canyonlands_of_bus, NULL); - - return 0; -} -machine_device_initcall(canyonlands, canyonlands_device_probe); - -static int __init canyonlands_probe(void) -{ - unsigned long root = of_get_flat_dt_root(); - - if (!of_flat_dt_is_compatible(root, "amcc,canyonlands")) - return 0; - - ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC; - - return 1; -} - -define_machine(canyonlands) { - .name = "Canyonlands", - .probe = canyonlands_probe, - .progress = udbg_progress, - .init_IRQ = uic_init_tree, - .get_irq = uic_get_irq, - .restart = ppc4xx_reset_system, - .calibrate_decr = generic_calibrate_decr, -}; -- cgit v1.2.3 From cfcf81ba16ce67c2383daf0f7659983a9a0e3c46 Mon Sep 17 00:00:00 2001 From: Josh Boyer Date: Tue, 19 Aug 2008 11:26:40 -0400 Subject: powerpc/44x: Migrate Katmai support to ppc44x_simple Migrate the AMCC Katmai board to use the ppc44x_simple platform file. Signed-off-by: Josh Boyer --- arch/powerpc/platforms/44x/Kconfig | 1 + arch/powerpc/platforms/44x/Makefile | 1 - arch/powerpc/platforms/44x/katmai.c | 62 ------------------------------------- 3 files changed, 1 insertion(+), 63 deletions(-) delete mode 100644 arch/powerpc/platforms/44x/katmai.c (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig index 92ba2d87f2f..66d44998893 100644 --- a/arch/powerpc/platforms/44x/Kconfig +++ b/arch/powerpc/platforms/44x/Kconfig @@ -49,6 +49,7 @@ config KATMAI bool "Katmai" depends on 44x default n + select PPC44x_SIMPLE select 440SPe select PCI select PPC4xx_PCI_EXPRESS diff --git a/arch/powerpc/platforms/44x/Makefile b/arch/powerpc/platforms/44x/Makefile index 0ab626d4795..2eb1cbe9bf6 100644 --- a/arch/powerpc/platforms/44x/Makefile +++ b/arch/powerpc/platforms/44x/Makefile @@ -4,7 +4,6 @@ obj-$(CONFIG_EBONY) += ebony.o obj-$(CONFIG_TAISHAN) += taishan.o obj-$(CONFIG_SAM440EP) += sam440ep.o obj-$(CONFIG_SEQUOIA) += sequoia.o -obj-$(CONFIG_KATMAI) += katmai.o obj-$(CONFIG_RAINIER) += rainier.o obj-$(CONFIG_WARP) += warp.o obj-$(CONFIG_WARP) += warp-nand.o diff --git a/arch/powerpc/platforms/44x/katmai.c b/arch/powerpc/platforms/44x/katmai.c deleted file mode 100644 index 44f4b3a00ce..00000000000 --- a/arch/powerpc/platforms/44x/katmai.c +++ /dev/null @@ -1,62 +0,0 @@ -/* - * Katmai board specific routines - * - * Benjamin Herrenschmidt - * Copyright 2007 IBM Corp. - * - * Based on the Bamboo code by - * Josh Boyer - * Copyright 2007 IBM Corporation - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#include -#include - -#include -#include -#include -#include -#include -#include -#include - -static __initdata struct of_device_id katmai_of_bus[] = { - { .compatible = "ibm,plb4", }, - { .compatible = "ibm,opb", }, - { .compatible = "ibm,ebc", }, - {}, -}; - -static int __init katmai_device_probe(void) -{ - of_platform_bus_probe(NULL, katmai_of_bus, NULL); - - return 0; -} -machine_device_initcall(katmai, katmai_device_probe); - -static int __init katmai_probe(void) -{ - unsigned long root = of_get_flat_dt_root(); - - if (!of_flat_dt_is_compatible(root, "amcc,katmai")) - return 0; - - ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC; - - return 1; -} - -define_machine(katmai) { - .name = "Katmai", - .probe = katmai_probe, - .progress = udbg_progress, - .init_IRQ = uic_init_tree, - .get_irq = uic_get_irq, - .restart = ppc4xx_reset_system, - .calibrate_decr = generic_calibrate_decr, -}; -- cgit v1.2.3 From 5c8495d2ad3cd9d7d59dfad05bdd2a7b3c5d2e9d Mon Sep 17 00:00:00 2001 From: Josh Boyer Date: Tue, 19 Aug 2008 11:26:44 -0400 Subject: powerpc/44x: Migrate Rainier support to ppc44x_simple Migrate the AMCC Rainier board to use the ppc44x_simple platform file. Signed-off-by: Josh Boyer --- arch/powerpc/platforms/44x/Kconfig | 1 + arch/powerpc/platforms/44x/Makefile | 1 - arch/powerpc/platforms/44x/rainier.c | 62 ------------------------------------ 3 files changed, 1 insertion(+), 63 deletions(-) delete mode 100644 arch/powerpc/platforms/44x/rainier.c (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig index 66d44998893..89e7f1f2288 100644 --- a/arch/powerpc/platforms/44x/Kconfig +++ b/arch/powerpc/platforms/44x/Kconfig @@ -60,6 +60,7 @@ config RAINIER bool "Rainier" depends on 44x default n + select PPC44x_SIMPLE select 440GRX select PCI help diff --git a/arch/powerpc/platforms/44x/Makefile b/arch/powerpc/platforms/44x/Makefile index 2eb1cbe9bf6..c201af69e83 100644 --- a/arch/powerpc/platforms/44x/Makefile +++ b/arch/powerpc/platforms/44x/Makefile @@ -4,7 +4,6 @@ obj-$(CONFIG_EBONY) += ebony.o obj-$(CONFIG_TAISHAN) += taishan.o obj-$(CONFIG_SAM440EP) += sam440ep.o obj-$(CONFIG_SEQUOIA) += sequoia.o -obj-$(CONFIG_RAINIER) += rainier.o obj-$(CONFIG_WARP) += warp.o obj-$(CONFIG_WARP) += warp-nand.o obj-$(CONFIG_XILINX_VIRTEX_5_FXT) += virtex.o diff --git a/arch/powerpc/platforms/44x/rainier.c b/arch/powerpc/platforms/44x/rainier.c deleted file mode 100644 index 4f1ff84c4b6..00000000000 --- a/arch/powerpc/platforms/44x/rainier.c +++ /dev/null @@ -1,62 +0,0 @@ -/* - * Rainier board specific routines - * - * Valentine Barshak - * Copyright 2007 MontaVista Software Inc. - * - * Based on the Bamboo code by - * Josh Boyer - * Copyright 2007 IBM Corporation - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#include -#include - -#include -#include -#include -#include -#include -#include -#include - -static __initdata struct of_device_id rainier_of_bus[] = { - { .compatible = "ibm,plb4", }, - { .compatible = "ibm,opb", }, - { .compatible = "ibm,ebc", }, - {}, -}; - -static int __init rainier_device_probe(void) -{ - of_platform_bus_probe(NULL, rainier_of_bus, NULL); - - return 0; -} -machine_device_initcall(rainier, rainier_device_probe); - -static int __init rainier_probe(void) -{ - unsigned long root = of_get_flat_dt_root(); - - if (!of_flat_dt_is_compatible(root, "amcc,rainier")) - return 0; - - ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC; - - return 1; -} - -define_machine(rainier) { - .name = "Rainier", - .probe = rainier_probe, - .progress = udbg_progress, - .init_IRQ = uic_init_tree, - .get_irq = uic_get_irq, - .restart = ppc4xx_reset_system, - .calibrate_decr = generic_calibrate_decr, -}; -- cgit v1.2.3 From 427e817df459bdfad6be307456f61601e10b5845 Mon Sep 17 00:00:00 2001 From: Josh Boyer Date: Tue, 19 Aug 2008 11:26:48 -0400 Subject: powerpc/44x: Migrate Sequoia support to ppc44x_simple Migrate the AMCC Sequoia board to use the ppc44x_simple platform file. Signed-off-by: Josh Boyer --- arch/powerpc/platforms/44x/Kconfig | 1 + arch/powerpc/platforms/44x/Makefile | 1 - arch/powerpc/platforms/44x/sequoia.c | 63 ------------------------------------ 3 files changed, 1 insertion(+), 64 deletions(-) delete mode 100644 arch/powerpc/platforms/44x/sequoia.c (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig index 89e7f1f2288..84e2a703666 100644 --- a/arch/powerpc/platforms/44x/Kconfig +++ b/arch/powerpc/platforms/44x/Kconfig @@ -31,6 +31,7 @@ config SEQUOIA bool "Sequoia" depends on 44x default n + select PPC44x_SIMPLE select 440EPX help This option enables support for the AMCC PPC440EPX evaluation board. diff --git a/arch/powerpc/platforms/44x/Makefile b/arch/powerpc/platforms/44x/Makefile index c201af69e83..a8a92c17098 100644 --- a/arch/powerpc/platforms/44x/Makefile +++ b/arch/powerpc/platforms/44x/Makefile @@ -3,7 +3,6 @@ obj-$(CONFIG_PPC44x_SIMPLE) += ppc44x_simple.o obj-$(CONFIG_EBONY) += ebony.o obj-$(CONFIG_TAISHAN) += taishan.o obj-$(CONFIG_SAM440EP) += sam440ep.o -obj-$(CONFIG_SEQUOIA) += sequoia.o obj-$(CONFIG_WARP) += warp.o obj-$(CONFIG_WARP) += warp-nand.o obj-$(CONFIG_XILINX_VIRTEX_5_FXT) += virtex.o diff --git a/arch/powerpc/platforms/44x/sequoia.c b/arch/powerpc/platforms/44x/sequoia.c deleted file mode 100644 index 49eb73daacd..00000000000 --- a/arch/powerpc/platforms/44x/sequoia.c +++ /dev/null @@ -1,63 +0,0 @@ -/* - * Sequoia board specific routines - * - * Valentine Barshak - * Copyright 2007 MontaVista Software Inc. - * - * Based on the Bamboo code by - * Josh Boyer - * Copyright 2007 IBM Corporation - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#include -#include - -#include -#include -#include -#include -#include -#include - -#include - -static __initdata struct of_device_id sequoia_of_bus[] = { - { .compatible = "ibm,plb4", }, - { .compatible = "ibm,opb", }, - { .compatible = "ibm,ebc", }, - {}, -}; - -static int __init sequoia_device_probe(void) -{ - of_platform_bus_probe(NULL, sequoia_of_bus, NULL); - - return 0; -} -machine_device_initcall(sequoia, sequoia_device_probe); - -static int __init sequoia_probe(void) -{ - unsigned long root = of_get_flat_dt_root(); - - if (!of_flat_dt_is_compatible(root, "amcc,sequoia")) - return 0; - - ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC; - - return 1; -} - -define_machine(sequoia) { - .name = "Sequoia", - .probe = sequoia_probe, - .progress = udbg_progress, - .init_IRQ = uic_init_tree, - .get_irq = uic_get_irq, - .restart = ppc4xx_reset_system, - .calibrate_decr = generic_calibrate_decr, -}; -- cgit v1.2.3 From 4f19a897c740e2a2e98f40b60055d56d8e437f6f Mon Sep 17 00:00:00 2001 From: Josh Boyer Date: Tue, 19 Aug 2008 11:26:53 -0400 Subject: powerpc/44x: Migrate Taishan support to ppc44x_simple Migrate the AMCC Taishan board to use the ppc44x_simple platform file. Signed-off-by: Josh Boyer --- arch/powerpc/platforms/44x/Kconfig | 1 + arch/powerpc/platforms/44x/Makefile | 1 - arch/powerpc/platforms/44x/taishan.c | 72 ------------------------------------ 3 files changed, 1 insertion(+), 73 deletions(-) delete mode 100644 arch/powerpc/platforms/44x/taishan.c (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig index 84e2a703666..e0bea834bfe 100644 --- a/arch/powerpc/platforms/44x/Kconfig +++ b/arch/powerpc/platforms/44x/Kconfig @@ -40,6 +40,7 @@ config TAISHAN bool "Taishan" depends on 44x default n + select PPC44x_SIMPLE select 440GX select PCI help diff --git a/arch/powerpc/platforms/44x/Makefile b/arch/powerpc/platforms/44x/Makefile index a8a92c17098..698133180ae 100644 --- a/arch/powerpc/platforms/44x/Makefile +++ b/arch/powerpc/platforms/44x/Makefile @@ -1,7 +1,6 @@ obj-$(CONFIG_44x) := misc_44x.o idle.o obj-$(CONFIG_PPC44x_SIMPLE) += ppc44x_simple.o obj-$(CONFIG_EBONY) += ebony.o -obj-$(CONFIG_TAISHAN) += taishan.o obj-$(CONFIG_SAM440EP) += sam440ep.o obj-$(CONFIG_WARP) += warp.o obj-$(CONFIG_WARP) += warp-nand.o diff --git a/arch/powerpc/platforms/44x/taishan.c b/arch/powerpc/platforms/44x/taishan.c deleted file mode 100644 index 49c78b2098b..00000000000 --- a/arch/powerpc/platforms/44x/taishan.c +++ /dev/null @@ -1,72 +0,0 @@ -/* - * Taishan board specific routines based off ebony.c code - * original copyrights below - * - * Matt Porter - * Copyright 2002-2005 MontaVista Software Inc. - * - * Eugene Surovegin or - * Copyright (c) 2003-2005 Zultys Technologies - * - * Rewritten and ported to the merged powerpc tree: - * Copyright 2007 David Gibson , IBM Corporation. - * - * Modified from ebony.c for taishan: - * Copyright 2007 Hugh Blemings , IBM Corporation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include -#include - -#include -#include -#include -#include -#include -#include -#include - -static __initdata struct of_device_id taishan_of_bus[] = { - { .compatible = "ibm,plb4", }, - { .compatible = "ibm,opb", }, - { .compatible = "ibm,ebc", }, - {}, -}; - -static int __init taishan_device_probe(void) -{ - of_platform_bus_probe(NULL, taishan_of_bus, NULL); - - return 0; -} -machine_device_initcall(taishan, taishan_device_probe); - -/* - * Called very early, MMU is off, device-tree isn't unflattened - */ -static int __init taishan_probe(void) -{ - unsigned long root = of_get_flat_dt_root(); - - if (!of_flat_dt_is_compatible(root, "amcc,taishan")) - return 0; - - ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC; - - return 1; -} - -define_machine(taishan) { - .name = "Taishan", - .probe = taishan_probe, - .progress = udbg_progress, - .init_IRQ = uic_init_tree, - .get_irq = uic_get_irq, - .restart = ppc4xx_reset_system, - .calibrate_decr = generic_calibrate_decr, -}; -- cgit v1.2.3 From ded563cf458e7803536f9d7b6bc5d808a6e37f21 Mon Sep 17 00:00:00 2001 From: Josh Boyer Date: Tue, 19 Aug 2008 11:27:01 -0400 Subject: powerpc/44x: Add explicit support for AMCC Glacier Add explicit support for the AMCC Glacier eval board to Kconfig and the ppc44x_simple file. Also removes the cayonlands compatible entry from the DTS file. Signed-off-by: Josh Boyer --- arch/powerpc/boot/dts/glacier.dts | 2 +- arch/powerpc/platforms/44x/Kconfig | 11 +++++++++++ arch/powerpc/platforms/44x/ppc44x_simple.c | 1 + 3 files changed, 13 insertions(+), 1 deletion(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/boot/dts/glacier.dts b/arch/powerpc/boot/dts/glacier.dts index 24cf0dba120..f3787a27f63 100644 --- a/arch/powerpc/boot/dts/glacier.dts +++ b/arch/powerpc/boot/dts/glacier.dts @@ -14,7 +14,7 @@ #address-cells = <2>; #size-cells = <1>; model = "amcc,glacier"; - compatible = "amcc,glacier", "amcc,canyonlands"; + compatible = "amcc,glacier"; dcr-parent = <&{/cpus/cpu@0}>; aliases { diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig index e0bea834bfe..f8ef279f325 100644 --- a/arch/powerpc/platforms/44x/Kconfig +++ b/arch/powerpc/platforms/44x/Kconfig @@ -92,6 +92,17 @@ config CANYONLANDS help This option enables support for the AMCC PPC460EX evaluation board. +config GLACIER + bool "Glacier" + depends on 44x + default n + select PPC44x_SIMPLE + select 460EX # Odd since it uses 460GT but the effects are the same + select PCI + select PPC4xx_PCI_EXPRESS + help + This option enables support for the AMCC PPC460GT evaluation board. + config YOSEMITE bool "Yosemite" depends on 44x diff --git a/arch/powerpc/platforms/44x/ppc44x_simple.c b/arch/powerpc/platforms/44x/ppc44x_simple.c index 32b0535f29f..1c064b242cf 100644 --- a/arch/powerpc/platforms/44x/ppc44x_simple.c +++ b/arch/powerpc/platforms/44x/ppc44x_simple.c @@ -52,6 +52,7 @@ machine_device_initcall(ppc44x_simple, ppc44x_device_probe); static char *board[] __initdata = { "amcc,bamboo", "amcc,cayonlands", + "amcc,glacier", "ibm,ebony", "amcc,katmai", "amcc,rainier", -- cgit v1.2.3 From 38d56f1677130004497835a776feb84f068ce22a Mon Sep 17 00:00:00 2001 From: Josh Boyer Date: Tue, 19 Aug 2008 11:27:05 -0400 Subject: powerpc/44x: Add explicit Yosemite support Add the Yosemite board to the explicitly supported list for ppc44x_simple boards and remove the compatible entry for bamboo from the DTS file. Signed-off-by: Josh Boyer --- arch/powerpc/boot/dts/yosemite.dts | 2 +- arch/powerpc/platforms/44x/ppc44x_simple.c | 3 ++- 2 files changed, 3 insertions(+), 2 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/boot/dts/yosemite.dts b/arch/powerpc/boot/dts/yosemite.dts index e39422aa0d8..1fa3cb4c4eb 100644 --- a/arch/powerpc/boot/dts/yosemite.dts +++ b/arch/powerpc/boot/dts/yosemite.dts @@ -15,7 +15,7 @@ #address-cells = <2>; #size-cells = <1>; model = "amcc,yosemite"; - compatible = "amcc,yosemite","amcc,bamboo"; + compatible = "amcc,yosemite"; dcr-parent = <&{/cpus/cpu@0}>; aliases { diff --git a/arch/powerpc/platforms/44x/ppc44x_simple.c b/arch/powerpc/platforms/44x/ppc44x_simple.c index 1c064b242cf..57e71203d0f 100644 --- a/arch/powerpc/platforms/44x/ppc44x_simple.c +++ b/arch/powerpc/platforms/44x/ppc44x_simple.c @@ -57,7 +57,8 @@ static char *board[] __initdata = { "amcc,katmai", "amcc,rainier", "amcc,sequoia", - "amcc,taishan" + "amcc,taishan", + "amcc,yosemite" }; static int __init ppc44x_probe(void) -- cgit v1.2.3 From cc2e113b4bbd415d53d8bb87a446cde6b7ce8acc Mon Sep 17 00:00:00 2001 From: Ilya Yanok Date: Mon, 1 Sep 2008 17:53:22 +1000 Subject: powerpc/4xx: Necessary fixes to PCI for 4GB RAM size The declaration of total_memory removed. Now including instead. Since total_memory is a phys_addr_t which is 64-bit on 44x and is_power_of_2() works with u32 so I just inlined (size & (size-1)) != 0 instead. Also this patch fixes default initialization: res->end should be 0x7fffffff not 0x80000000. Signed-off-by: Ilya Yanok Acked-by: Stefan Roese Signed-off-by: Josh Boyer --- arch/powerpc/sysdev/ppc4xx_pci.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/sysdev/ppc4xx_pci.c b/arch/powerpc/sysdev/ppc4xx_pci.c index d5c345dbb89..5da8a44ea2f 100644 --- a/arch/powerpc/sysdev/ppc4xx_pci.c +++ b/arch/powerpc/sysdev/ppc4xx_pci.c @@ -30,14 +30,12 @@ #include #include #include +#include #include "ppc4xx_pci.h" static int dma_offset_set; -/* Move that to a useable header */ -extern unsigned long total_memory; - #define U64_TO_U32_LOW(val) ((u32)((val) & 0x00000000ffffffffULL)) #define U64_TO_U32_HIGH(val) ((u32)((val) >> 32)) @@ -105,7 +103,8 @@ static int __init ppc4xx_parse_dma_ranges(struct pci_controller *hose, /* Default */ res->start = 0; - res->end = size = 0x80000000; + size = 0x80000000; + res->end = size - 1; res->flags = IORESOURCE_MEM | IORESOURCE_PREFETCH; /* Get dma-ranges property */ @@ -167,13 +166,13 @@ static int __init ppc4xx_parse_dma_ranges(struct pci_controller *hose, */ if (size < total_memory) { printk(KERN_ERR "%s: dma-ranges too small " - "(size=%llx total_memory=%lx)\n", - hose->dn->full_name, size, total_memory); + "(size=%llx total_memory=%llx)\n", + hose->dn->full_name, size, (u64)total_memory); return -ENXIO; } /* Check we are a power of 2 size and that base is a multiple of size*/ - if (!is_power_of_2(size) || + if ((size & (size - 1)) != 0 || (res->start & (size - 1)) != 0) { printk(KERN_ERR "%s: dma-ranges unaligned\n", hose->dn->full_name); -- cgit v1.2.3 From 423da26997497f5938c0b169f1cc9762b5f3fa9f Mon Sep 17 00:00:00 2001 From: Matthias Fuchs Date: Sun, 7 Sep 2008 21:57:21 +0000 Subject: powerpc/44x: Add hwmon support to Sequoia device tree This patch adds support for the AD7414 temperature sensor on Sequoia PPC440EPx board. Signed-off-by: Matthias Fuchs Acked-by: Stefan Roese Signed-off-by: Josh Boyer --- arch/powerpc/boot/dts/sequoia.dts | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'arch/powerpc') diff --git a/arch/powerpc/boot/dts/sequoia.dts b/arch/powerpc/boot/dts/sequoia.dts index 72d15f075d3..3b295e8df53 100644 --- a/arch/powerpc/boot/dts/sequoia.dts +++ b/arch/powerpc/boot/dts/sequoia.dts @@ -246,13 +246,22 @@ }; IIC0: i2c@ef600700 { + #address-cells = <1>; + #size-cells = <0>; compatible = "ibm,iic-440epx", "ibm,iic"; reg = <0xef600700 0x00000014>; interrupt-parent = <&UIC0>; interrupts = <0x2 0x4>; + + hwmon@48 { + compatible = "adi,ad7414"; + reg = <0x48>; + }; }; IIC1: i2c@ef600800 { + #address-cells = <1>; + #size-cells = <0>; compatible = "ibm,iic-440epx", "ibm,iic"; reg = <0xef600800 0x00000014>; interrupt-parent = <&UIC0>; -- cgit v1.2.3