From 29cfe6f4fb7d187f65564764a0ecf2caf9d8ed58 Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Fri, 16 Feb 2007 12:01:29 -0600 Subject: [POWERPC] add of_get_mac_address and update fsl_soc.c to use it Add function of_get_mac_address(), which obtains the best MAC address to use from the device tree by checking various properties in order. The order is: 'mac-address', then 'local-mac-address', then 'address'. It skips properties that contain invalid MAC addresses, which were probably not initialized by U-Boot. Update gfar_of_init() and fs_enet_of_init() in fsl_soc.c to call of_get_mac_address(). Signed-off-by: Timur Tabi Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/prom_parse.c | 40 ++++++++++++++++++++++++++++++++++++++++ arch/powerpc/sysdev/fsl_soc.c | 19 +++++++------------ 2 files changed, 47 insertions(+), 12 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/kernel/prom_parse.c b/arch/powerpc/kernel/prom_parse.c index 12c51e4ad2b..ea6fd552c7e 100644 --- a/arch/powerpc/kernel/prom_parse.c +++ b/arch/powerpc/kernel/prom_parse.c @@ -5,6 +5,7 @@ #include #include #include +#include #include #include @@ -1003,3 +1004,42 @@ int of_irq_map_one(struct device_node *device, int index, struct of_irq *out_irq return res; } EXPORT_SYMBOL_GPL(of_irq_map_one); + +/** + * Search the device tree for the best MAC address to use. 'mac-address' is + * checked first, because that is supposed to contain to "most recent" MAC + * address. If that isn't set, then 'local-mac-address' is checked next, + * because that is the default address. If that isn't set, then the obsolete + * 'address' is checked, just in case we're using an old device tree. + * + * Note that the 'address' property is supposed to contain a virtual address of + * the register set, but some DTS files have redefined that property to be the + * MAC address. + * + * All-zero MAC addresses are rejected, because those could be properties that + * exist in the device tree, but were not set by U-Boot. For example, the + * DTS could define 'mac-address' and 'local-mac-address', with zero MAC + * addresses. Some older U-Boots only initialized 'local-mac-address'. In + * this case, the real MAC is in 'local-mac-address', and 'mac-address' exists + * but is all zeros. +*/ +const void *of_get_mac_address(struct device_node *np) +{ + struct property *pp; + + pp = of_find_property(np, "mac-address", NULL); + if (pp && (pp->length == 6) && is_valid_ether_addr(pp->value)) + return pp->value; + + pp = of_find_property(np, "local-mac-address", NULL); + if (pp && (pp->length == 6) && is_valid_ether_addr(pp->value)) + return pp->value; + + pp = of_find_property(np, "address", NULL); + if (pp && (pp->length == 6) && is_valid_ether_addr(pp->value)) + return pp->value; + + return NULL; +} +EXPORT_SYMBOL(of_get_mac_address); + diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c index 34161bc5a02..d20f02927f7 100644 --- a/arch/powerpc/sysdev/fsl_soc.c +++ b/arch/powerpc/sysdev/fsl_soc.c @@ -233,14 +233,7 @@ static int __init gfar_of_init(void) goto err; } - mac_addr = get_property(np, "local-mac-address", NULL); - if (mac_addr == NULL) - mac_addr = get_property(np, "mac-address", NULL); - if (mac_addr == NULL) { - /* Obsolete */ - mac_addr = get_property(np, "address", NULL); - } - + mac_addr = of_get_mac_address(np); if (mac_addr) memcpy(gfar_data.mac_addr, mac_addr, 6); @@ -646,8 +639,9 @@ static int __init fs_enet_of_init(void) goto unreg; } - mac_addr = get_property(np, "mac-address", NULL); - memcpy(fs_enet_data.macaddr, mac_addr, 6); + mac_addr = of_get_mac_address(np); + if (mac_addr) + memcpy(fs_enet_data.macaddr, mac_addr, 6); ph = get_property(np, "phy-handle", NULL); phy = of_find_node_by_phandle(*ph); @@ -931,8 +925,9 @@ static int __init fs_enet_of_init(void) goto err; r[0].name = enet_regs; - mac_addr = (void *)get_property(np, "mac-address", NULL); - memcpy(fs_enet_data.macaddr, mac_addr, 6); + mac_addr = of_get_mac_address(np); + if (mac_addr) + memcpy(fs_enet_data.macaddr, mac_addr, 6); ph = (phandle *) get_property(np, "phy-handle", NULL); if (ph != NULL) -- cgit v1.2.3 From aebcbf39be0aadded32f4cd82c1d88a8cac4614b Mon Sep 17 00:00:00 2001 From: Olaf Hering Date: Fri, 16 Feb 2007 10:20:46 +0100 Subject: [POWERPC] use winbond libata instead of ide driver for pseries CD drives Change the default for the built-in IDE on p610/p615/p630 from ide to libata. libata has better error handling and the drive can recover when hald does its CD media polling. Signed-off-by: Olaf Hering Signed-off-by: Paul Mackerras --- arch/powerpc/configs/ppc64_defconfig | 4 ++-- arch/powerpc/configs/pseries_defconfig | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'arch/powerpc') diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig index debac66e825..a8da0aea3b8 100644 --- a/arch/powerpc/configs/ppc64_defconfig +++ b/arch/powerpc/configs/ppc64_defconfig @@ -500,7 +500,7 @@ CONFIG_BLK_DEV_AMD74XX=y # CONFIG_BLK_DEV_PDC202XX_NEW is not set # CONFIG_BLK_DEV_SVWKS is not set # CONFIG_BLK_DEV_SIIMAGE is not set -CONFIG_BLK_DEV_SL82C105=y +# CONFIG_BLK_DEV_SL82C105 is not set # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set @@ -646,7 +646,7 @@ CONFIG_SATA_SVW=y # CONFIG_PATA_SIL680 is not set # CONFIG_PATA_SIS is not set # CONFIG_PATA_VIA is not set -# CONFIG_PATA_WINBOND is not set +CONFIG_PATA_WINBOND=y # # Multi-device support (RAID and LVM) diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig index 1c794fe718f..6e96e50c362 100644 --- a/arch/powerpc/configs/pseries_defconfig +++ b/arch/powerpc/configs/pseries_defconfig @@ -483,7 +483,7 @@ CONFIG_BLK_DEV_AMD74XX=y # CONFIG_BLK_DEV_PDC202XX_NEW is not set # CONFIG_BLK_DEV_SVWKS is not set # CONFIG_BLK_DEV_SIIMAGE is not set -CONFIG_BLK_DEV_SL82C105=y +# CONFIG_BLK_DEV_SL82C105 is not set # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set @@ -628,7 +628,7 @@ CONFIG_ATA=y # CONFIG_PATA_SIL680 is not set # CONFIG_PATA_SIS is not set # CONFIG_PATA_VIA is not set -# CONFIG_PATA_WINBOND is not set +CONFIG_PATA_WINBOND=y # # Multi-device support (RAID and LVM) -- cgit v1.2.3 From 5d30bf309717a518d0c4180af41650d4dcd3bb38 Mon Sep 17 00:00:00 2001 From: Manish Ahuja Date: Thu, 8 Feb 2007 16:01:17 -0600 Subject: [POWERPC] pseries: Enabling auto poweron after power is restored. During power outages, the UPS notifies the system for a shutdown. In the current setup, it isn't possible to poweron when power is restored. This patch fixes the issue by calling the right ibm,power-off-ups token during such events. It also adds a sysfs interface so userspace can specify whether or not to power on when power is restored. Signed-off-by: Manish Ahuja Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/pseries/Makefile | 2 +- arch/powerpc/platforms/pseries/power.c | 87 ++++++++++++++++++++++++++++++++ arch/powerpc/platforms/pseries/pseries.h | 3 ++ arch/powerpc/platforms/pseries/setup.c | 30 ++++++++++- 4 files changed, 120 insertions(+), 2 deletions(-) create mode 100644 arch/powerpc/platforms/pseries/power.c (limited to 'arch/powerpc') diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile index dc0583bdbc6..2dfd05095a2 100644 --- a/arch/powerpc/platforms/pseries/Makefile +++ b/arch/powerpc/platforms/pseries/Makefile @@ -4,7 +4,7 @@ endif obj-y := pci.o lpar.o hvCall.o nvram.o reconfig.o \ setup.o iommu.o ras.o rtasd.o pci_dlpar.o \ - firmware.o + firmware.o power.o obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_XICS) += xics.o obj-$(CONFIG_SCANLOG) += scanlog.o diff --git a/arch/powerpc/platforms/pseries/power.c b/arch/powerpc/platforms/pseries/power.c new file mode 100644 index 00000000000..2624b71df73 --- /dev/null +++ b/arch/powerpc/platforms/pseries/power.c @@ -0,0 +1,87 @@ +/* + * Interface for power-management for ppc64 compliant platform + * + * Manish Ahuja + * + * Feb 2007 + * + * Copyright (C) 2007 IBM Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include + +unsigned long rtas_poweron_auto; /* default and normal state is 0 */ + +static ssize_t auto_poweron_show(struct subsystem *subsys, char *buf) +{ + return sprintf(buf, "%lu\n", rtas_poweron_auto); +} + +static ssize_t +auto_poweron_store(struct subsystem *subsys, const char *buf, size_t n) +{ + int ret; + unsigned long ups_restart; + ret = sscanf(buf, "%lu", &ups_restart); + + if ((ret == 1) && ((ups_restart == 1) || (ups_restart == 0))){ + rtas_poweron_auto = ups_restart; + return n; + } + return -EINVAL; +} + +static struct subsys_attribute auto_poweron_attr = { + .attr = { + .name = __stringify(auto_poweron), + .mode = 0644, + }, + .show = auto_poweron_show, + .store = auto_poweron_store, +}; + +#ifndef CONFIG_PM +decl_subsys(power,NULL,NULL); + +static struct attribute *g[] = { + &auto_poweron_attr.attr, + NULL, +}; + +static struct attribute_group attr_group = { + .attrs = g, +}; + +static int __init pm_init(void) +{ + int error = subsystem_register(&power_subsys); + if (!error) + error = sysfs_create_group(&power_subsys.kset.kobj,&attr_group); + return error; +} +core_initcall(pm_init); +#else +extern struct subsystem power_subsys; + +static int __init apo_pm_init(void) +{ + return (subsys_create_file(&power_subsys, &auto_poweron_attr)); +} +__initcall(apo_pm_init); +#endif diff --git a/arch/powerpc/platforms/pseries/pseries.h b/arch/powerpc/platforms/pseries/pseries.h index 35264f9af0f..22bc0198974 100644 --- a/arch/powerpc/platforms/pseries/pseries.h +++ b/arch/powerpc/platforms/pseries/pseries.h @@ -33,4 +33,7 @@ static inline void setup_kexec_cpu_down_xics(void) { } static inline void setup_kexec_cpu_down_mpic(void) { } #endif +/* Poweron flag used for enabling auto ups restart */ +extern unsigned long rtas_poweron_auto; + #endif /* _PSERIES_PSERIES_H */ diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index 435a0459652..34aff47b1f5 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -486,6 +486,34 @@ static int pSeries_pci_probe_mode(struct pci_bus *bus) return PCI_PROBE_NORMAL; } +/** + * pSeries_power_off - tell firmware about how to power off the system. + * + * This function calls either the power-off rtas token in normal cases + * or the ibm,power-off-ups token (if present & requested) in case of + * a power failure. If power-off token is used, power on will only be + * possible with power button press. If ibm,power-off-ups token is used + * it will allow auto poweron after power is restored. + */ +void pSeries_power_off(void) +{ + int rc; + int rtas_poweroff_ups_token = rtas_token("ibm,power-off-ups"); + + if (rtas_flash_term_hook) + rtas_flash_term_hook(SYS_POWER_OFF); + + if (rtas_poweron_auto == 0 || + rtas_poweroff_ups_token == RTAS_UNKNOWN_SERVICE) { + rc = rtas_call(rtas_token("power-off"), 2, 1, NULL, -1, -1); + printk(KERN_INFO "RTAS power-off returned %d\n", rc); + } else { + rc = rtas_call(rtas_poweroff_ups_token, 0, 1, NULL); + printk(KERN_INFO "RTAS ibm,power-off-ups returned %d\n", rc); + } + for (;;); +} + define_machine(pseries) { .name = "pSeries", .probe = pSeries_probe, @@ -496,7 +524,7 @@ define_machine(pseries) { .pcibios_fixup = pSeries_final_fixup, .pci_probe_mode = pSeries_pci_probe_mode, .restart = rtas_restart, - .power_off = rtas_power_off, + .power_off = pSeries_power_off, .halt = rtas_halt, .panic = rtas_os_term, .get_boot_time = rtas_get_boot_time, -- cgit v1.2.3