From d90cbd469c9c7c1494fc2084af9319e6a557368b Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Fri, 12 Jun 2009 10:26:24 +0200 Subject: [S390] add mini sclp driver This adds a mini sclp device driver for very early use. The primary and probably only use will be to emit a message to the console if the cpu doesn't provide the minimum required capabilities to run the kernel. After printing the message a disabled wait will be loaded and the machine stops operating. Printing the message is also part of this patch. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/Makefile | 2 +- arch/s390/kernel/head.S | 18 ++- arch/s390/kernel/sclp.S | 327 ++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 342 insertions(+), 5 deletions(-) create mode 100644 arch/s390/kernel/sclp.S (limited to 'arch/s390') diff --git a/arch/s390/kernel/Makefile b/arch/s390/kernel/Makefile index 228e3105ded..0657de7944f 100644 --- a/arch/s390/kernel/Makefile +++ b/arch/s390/kernel/Makefile @@ -22,7 +22,7 @@ CFLAGS_sysinfo.o += -Iinclude/math-emu -Iarch/s390/math-emu -w obj-y := bitmap.o traps.o time.o process.o base.o early.o setup.o \ processor.o sys_s390.o ptrace.o signal.o cpcmd.o ebcdic.o \ s390_ext.o debug.o irq.o ipl.o dis.o diag.o mem_detect.o \ - vdso.o vtime.o sysinfo.o nmi.o + vdso.o vtime.o sysinfo.o nmi.o sclp.o obj-y += $(if $(CONFIG_64BIT),entry64.o,entry.o) obj-y += $(if $(CONFIG_64BIT),reipl64.o,reipl.o) diff --git a/arch/s390/kernel/head.S b/arch/s390/kernel/head.S index bf8cf1caeff..6d227413cbe 100644 --- a/arch/s390/kernel/head.S +++ b/arch/s390/kernel/head.S @@ -1,7 +1,5 @@ /* - * arch/s390/kernel/head.S - * - * Copyright (C) IBM Corp. 1999,2006 + * Copyright IBM Corp. 1999,2009 * * Author(s): Hartmut Penner * Martin Schwidefsky @@ -494,7 +492,19 @@ startup:basr %r13,0 # get base n %r0,2f+12-.LPG0(%r13) cl %r0,2f+12-.LPG0(%r13) je 3f -1: lpsw 2f-.LPG0(13) # machine type not good enough, crash +1: l %r15,.Lstack-.LPG0(%r13) + ahi %r15,1<<(PAGE_SHIFT+THREAD_ORDER) # init_task_union+THREAD_SIZE + ahi %r15,-96 + la %r2,.Lals_string-.LPG0(%r13) + l %r3,.Lsclp_print-.LPG0(%r13) + basr %r14,%r3 + lpsw 2f-.LPG0(%r13) # machine type not good enough, crash +.Lals_string: + .asciz "The Linux kernel requires more recent processor hardware" +.Lsclp_print: + .long _sclp_print_early +.Lstack: + .long init_thread_union .align 16 2: .long 0x000a0000,0x8badcccc #if defined(CONFIG_64BIT) diff --git a/arch/s390/kernel/sclp.S b/arch/s390/kernel/sclp.S new file mode 100644 index 00000000000..20639dfe0c4 --- /dev/null +++ b/arch/s390/kernel/sclp.S @@ -0,0 +1,327 @@ +/* + * Mini SCLP driver. + * + * Copyright IBM Corp. 2004,2009 + * + * Author(s): Peter Oberparleiter , + * Heiko Carstens , + * + */ + +LC_EXT_NEW_PSW = 0x58 # addr of ext int handler +LC_EXT_INT_PARAM = 0x80 # addr of ext int parameter +LC_EXT_INT_CODE = 0x86 # addr of ext int code + +# +# Subroutine which waits synchronously until either an external interruption +# or a timeout occurs. +# +# Parameters: +# R2 = 0 for no timeout, non-zero for timeout in (approximated) seconds +# +# Returns: +# R2 = 0 on interrupt, 2 on timeout +# R3 = external interruption parameter if R2=0 +# + +.section ".init.text","ax" + +_sclp_wait_int: + stm %r6,%r15,24(%r15) # save registers + basr %r13,0 # get base register +.LbaseS1: + ahi %r15,-96 # create stack frame + la %r8,LC_EXT_NEW_PSW # register int handler + mvc .LoldpswS1-.LbaseS1(8,%r13),0(%r8) + mvc 0(8,%r8),.LextpswS1-.LbaseS1(%r13) + lhi %r6,0x0200 # cr mask for ext int (cr0.54) + ltr %r2,%r2 + jz .LsetctS1 + ahi %r6,0x0800 # cr mask for clock int (cr0.52) + stck .LtimeS1-.LbaseS1(%r13) # initiate timeout + al %r2,.LtimeS1-.LbaseS1(%r13) + st %r2,.LtimeS1-.LbaseS1(%r13) + sckc .LtimeS1-.LbaseS1(%r13) + +.LsetctS1: + stctl %c0,%c0,.LctlS1-.LbaseS1(%r13) # enable required interrupts + l %r0,.LctlS1-.LbaseS1(%r13) + lhi %r1,~(0x200 | 0x800) # clear old values + nr %r1,%r0 + or %r1,%r6 # set new value + st %r1,.LctlS1-.LbaseS1(%r13) + lctl %c0,%c0,.LctlS1-.LbaseS1(%r13) + st %r0,.LctlS1-.LbaseS1(%r13) + lhi %r2,2 # return code for timeout +.LloopS1: + lpsw .LwaitpswS1-.LbaseS1(%r13) # wait until interrupt +.LwaitS1: + lh %r7,LC_EXT_INT_CODE + chi %r7,0x1004 # timeout? + je .LtimeoutS1 + chi %r7,0x2401 # service int? + jne .LloopS1 + sr %r2,%r2 + l %r3,LC_EXT_INT_PARAM +.LtimeoutS1: + lctl %c0,%c0,.LctlS1-.LbaseS1(%r13) # restore interrupt setting + # restore old handler + mvc 0(8,%r8),.LoldpswS1-.LbaseS1(%r13) + lm %r6,%r15,120(%r15) # restore registers + br %r14 # return to caller + + .align 8 +.LoldpswS1: + .long 0, 0 # old ext int PSW +.LextpswS1: + .long 0x00080000, 0x80000000+.LwaitS1 # PSW to handle ext int +.LwaitpswS1: + .long 0x010a0000, 0x00000000+.LloopS1 # PSW to wait for ext int +.LtimeS1: + .quad 0 # current time +.LctlS1: + .long 0 # CT0 contents + +# +# Subroutine to synchronously issue a service call. +# +# Parameters: +# R2 = command word +# R3 = sccb address +# +# Returns: +# R2 = 0 on success, 1 on failure +# R3 = sccb response code if R2 = 0 +# + +_sclp_servc: + stm %r6,%r15,24(%r15) # save registers + ahi %r15,-96 # create stack frame + lr %r6,%r2 # save command word + lr %r7,%r3 # save sccb address +.LretryS2: + lhi %r2,1 # error return code + .insn rre,0xb2200000,%r6,%r7 # servc + brc 1,.LendS2 # exit if not operational + brc 8,.LnotbusyS2 # go on if not busy + sr %r2,%r2 # wait until no longer busy + bras %r14,_sclp_wait_int + j .LretryS2 # retry +.LnotbusyS2: + sr %r2,%r2 # wait until result + bras %r14,_sclp_wait_int + sr %r2,%r2 + lh %r3,6(%r7) +.LendS2: + lm %r6,%r15,120(%r15) # restore registers + br %r14 + +# +# Subroutine to set up the SCLP interface. +# +# Parameters: +# R2 = 0 to activate, non-zero to deactivate +# +# Returns: +# R2 = 0 on success, non-zero on failure +# + +_sclp_setup: + stm %r6,%r15,24(%r15) # save registers + ahi %r15,-96 # create stack frame + basr %r13,0 # get base register +.LbaseS3: + l %r6,.LsccbS0-.LbaseS3(%r13) # prepare init mask sccb + mvc 0(.LinitendS3-.LinitsccbS3,%r6),.LinitsccbS3-.LbaseS3(%r13) + ltr %r2,%r2 # initialization? + jz .LdoinitS3 # go ahead + # clear masks + xc .LinitmaskS3-.LinitsccbS3(8,%r6),.LinitmaskS3-.LinitsccbS3(%r6) +.LdoinitS3: + l %r2,.LwritemaskS3-.LbaseS3(%r13)# get command word + lr %r3,%r6 # get sccb address + bras %r14,_sclp_servc # issue service call + ltr %r2,%r2 # servc successful? + jnz .LerrorS3 + chi %r3,0x20 # write mask successful? + jne .LerrorS3 + # check masks + la %r2,.LinitmaskS3-.LinitsccbS3(%r6) + l %r1,0(%r2) # receive mask ok? + n %r1,12(%r2) + cl %r1,0(%r2) + jne .LerrorS3 + l %r1,4(%r2) # send mask ok? + n %r1,8(%r2) + cl %r1,4(%r2) + sr %r2,%r2 + je .LendS3 +.LerrorS3: + lhi %r2,1 # error return code +.LendS3: + lm %r6,%r15,120(%r15) # restore registers + br %r14 +.LwritemaskS3: + .long 0x00780005 # SCLP command for write mask +.LinitsccbS3: + .word .LinitendS3-.LinitsccbS3 + .byte 0,0,0,0 + .word 0 + .word 0 + .word 4 +.LinitmaskS3: + .long 0x80000000 + .long 0x40000000 + .long 0 + .long 0 +.LinitendS3: + +# +# Subroutine which prints a given text to the SCLP console. +# +# Parameters: +# R2 = address of nil-terminated ASCII text +# +# Returns: +# R2 = 0 on success, 1 on failure +# + +_sclp_print: + stm %r6,%r15,24(%r15) # save registers + ahi %r15,-96 # create stack frame + basr %r13,0 # get base register +.LbaseS4: + l %r8,.LsccbS0-.LbaseS4(%r13) # prepare write data sccb + mvc 0(.LmtoS4-.LwritesccbS4,%r8),.LwritesccbS4-.LbaseS4(%r13) + la %r7,.LmtoS4-.LwritesccbS4(%r8) # current mto addr + sr %r0,%r0 + l %r10,.Lascebc-.LbaseS4(%r13) # address of translation table +.LinitmtoS4: + # initialize mto + mvc 0(.LmtoendS4-.LmtoS4,%r7),.LmtoS4-.LbaseS4(%r13) + lhi %r6,.LmtoendS4-.LmtoS4 # current mto length +.LloopS4: + ic %r0,0(%r2) # get character + ahi %r2,1 + ltr %r0,%r0 # end of string? + jz .LfinalizemtoS4 + chi %r0,0x15 # end of line (NL)? + jz .LfinalizemtoS4 + stc %r0,0(%r6,%r7) # copy to mto + la %r11,0(%r6,%r7) + tr 0(1,%r11),0(%r10) # translate to EBCDIC + ahi %r6,1 + j .LloopS4 +.LfinalizemtoS4: + sth %r6,0(%r7) # update mto length + lh %r9,.LmdbS4-.LwritesccbS4(%r8) # update mdb length + ar %r9,%r6 + sth %r9,.LmdbS4-.LwritesccbS4(%r8) + lh %r9,.LevbufS4-.LwritesccbS4(%r8)# update evbuf length + ar %r9,%r6 + sth %r9,.LevbufS4-.LwritesccbS4(%r8) + lh %r9,0(%r8) # update sccb length + ar %r9,%r6 + sth %r9,0(%r8) + ar %r7,%r6 # update current mto adress + ltr %r0,%r0 # more characters? + jnz .LinitmtoS4 + l %r2,.LwritedataS4-.LbaseS4(%r13)# write data + lr %r3,%r8 + bras %r14,_sclp_servc + ltr %r2,%r2 # servc successful? + jnz .LendS4 + chi %r3,0x20 # write data successful? + je .LendS4 + lhi %r2,1 # error return code +.LendS4: + lm %r6,%r15,120(%r15) # restore registers + br %r14 + +# +# Function which prints a given text to the SCLP console. +# +# Parameters: +# R2 = address of nil-terminated ASCII text +# +# Returns: +# R2 = 0 on success, 1 on failure +# + + .globl _sclp_print_early +_sclp_print_early: + stm %r6,%r15,24(%r15) # save registers + ahi %r15,-96 # create stack frame + lr %r10,%r2 # save string pointer + lhi %r2,0 + bras %r14,_sclp_setup # enable console + ltr %r2,%r2 + jnz .LendS5 + lr %r2,%r10 + bras %r14,_sclp_print # print string + ltr %r2,%r2 + jnz .LendS5 + lhi %r2,1 + bras %r14,_sclp_setup # disable console +.LendS5: + lm %r6,%r15,120(%r15) # restore registers + br %r14 + +.LwritedataS4: + .long 0x00760005 # SCLP command for write data +.LwritesccbS4: + # sccb + .word .LmtoS4-.LwritesccbS4 + .byte 0 + .byte 0,0,0 + .word 0 + + # evbuf +.LevbufS4: + .word .LmtoS4-.LevbufS4 + .byte 0x02 + .byte 0 + .word 0 + +.LmdbS4: + # mdb + .word .LmtoS4-.LmdbS4 + .word 1 + .long 0xd4c4c240 + .long 1 + + # go +.LgoS4: + .word .LmtoS4-.LgoS4 + .word 1 + .long 0 + .byte 0,0,0,0,0,0,0,0 + .byte 0,0,0 + .byte 0 + .byte 0,0,0,0,0,0,0 + .byte 0 + .word 0 + .byte 0,0,0,0,0,0,0,0,0,0 + .byte 0,0,0,0,0,0,0,0 + .byte 0,0,0,0,0,0,0,0 + +.LmtoS4: + .word .LmtoendS4-.LmtoS4 + .word 4 + .word 0x1000 + .byte 0 + .byte 0,0,0 +.LmtoendS4: + + # Global constants +.LsccbS0: + .long _sclp_work_area +.Lascebc: + .long _ascebc +.previous + +.section ".init.data","a" + .balign 4096 +_sclp_work_area: + .fill 4096 +.previous -- cgit v1.2.3