From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- arch/sh/boards/overdrive/galileo.c | 588 +++++++++++++++++++++++++++++++++++++ 1 file changed, 588 insertions(+) create mode 100644 arch/sh/boards/overdrive/galileo.c (limited to 'arch/sh/boards/overdrive/galileo.c') diff --git a/arch/sh/boards/overdrive/galileo.c b/arch/sh/boards/overdrive/galileo.c new file mode 100644 index 00000000000..276fa11ee4c --- /dev/null +++ b/arch/sh/boards/overdrive/galileo.c @@ -0,0 +1,588 @@ +/* + * Copyright (C) 2000 David J. Mckay (david.mckay@st.com) + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * This file contains the PCI routines required for the Galileo GT6411 + * PCI bridge as used on the Orion and Overdrive boards. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + + +/* After boot, we shift the Galileo registers so that they appear + * in BANK6, along with IO space. This means we can have one contingous + * lump of PCI address space without these registers appearing in the + * middle of them + */ + +#define GT64111_BASE_ADDRESS 0xbb000000 +#define GT64111_IO_BASE_ADDRESS 0x1000 +/* The GT64111 registers appear at this address to the SH4 after reset */ +#define RESET_GT64111_BASE_ADDRESS 0xb4000000 + +/* Macros used to access the Galileo registers */ +#define RESET_GT64111_REG(x) (RESET_GT64111_BASE_ADDRESS+x) +#define GT64111_REG(x) (GT64111_BASE_ADDRESS+x) + +#define RESET_GT_WRITE(x,v) writel((v),RESET_GT64111_REG(x)) + +#define RESET_GT_READ(x) readl(RESET_GT64111_REG(x)) + +#define GT_WRITE(x,v) writel((v),GT64111_REG(x)) +#define GT_WRITE_BYTE(x,v) writeb((v),GT64111_REG(x)) +#define GT_WRITE_SHORT(x,v) writew((v),GT64111_REG(x)) + +#define GT_READ(x) readl(GT64111_REG(x)) +#define GT_READ_BYTE(x) readb(GT64111_REG(x)) +#define GT_READ_SHORT(x) readw(GT64111_REG(x)) + + +/* Where the various SH banks start at */ +#define SH_BANK4_ADR 0xb0000000 +#define SH_BANK5_ADR 0xb4000000 +#define SH_BANK6_ADR 0xb8000000 + +/* Masks out everything but lines 28,27,26 */ +#define BANK_SELECT_MASK 0x1c000000 + +#define SH4_TO_BANK(x) ( (x) & BANK_SELECT_MASK) + +/* + * Masks used for address conversaion. Bank 6 is used for IO and + * has all the address bits zeroed by the FPGA. Special case this + */ +#define MEMORY_BANK_MASK 0x1fffffff +#define IO_BANK_MASK 0x03ffffff + +/* Mark bank 6 as the bank used for IO. You can change this in the FPGA code + * if you want + */ +#define IO_BANK_ADR PCI_GTIO_BASE + +/* Will select the correct mask to apply depending on the SH$ address */ +#define SELECT_BANK_MASK(x) \ + ( (SH4_TO_BANK(x)==SH4_TO_BANK(IO_BANK_ADR)) ? IO_BANK_MASK : MEMORY_BANK_MASK) + +/* Converts between PCI space and P2 region */ +#define SH4_TO_PCI(x) ((x)&SELECT_BANK_MASK(x)) + +/* Various macros for figuring out what to stick in the Galileo registers. + * You *really* don't want to figure this stuff out by hand, you always get + * it wrong + */ +#define GT_MEM_LO_ADR(x) ((((unsigned)((x)&SELECT_BANK_MASK(x)))>>21)&0x7ff) +#define GT_MEM_HI_ADR(x) ((((unsigned)((x)&SELECT_BANK_MASK(x)))>>21)&0x7f) +#define GT_MEM_SUB_ADR(x) ((((unsigned)((x)&SELECT_BANK_MASK(x)))>>20)&0xff) + +#define PROGRAM_HI_LO(block,a,s) \ + GT_WRITE(block##_LO_DEC_ADR,GT_MEM_LO_ADR(a));\ + GT_WRITE(block##_HI_DEC_ADR,GT_MEM_HI_ADR(a+s-1)) + +#define PROGRAM_SUB_HI_LO(block,a,s) \ + GT_WRITE(block##_LO_DEC_ADR,GT_MEM_SUB_ADR(a));\ + GT_WRITE(block##_HI_DEC_ADR,GT_MEM_SUB_ADR(a+s-1)) + +/* We need to set the size, and the offset register */ + +#define GT_BAR_MASK(x) ((x)&~0xfff) + +/* Macro to set up the BAR in the Galileo. Essentially used for the DRAM */ +#define PROGRAM_GT_BAR(block,a,s) \ + GT_WRITE(PCI_##block##_BANK_SIZE,GT_BAR_MASK((s-1)));\ + write_config_to_galileo(PCI_CONFIG_##block##_BASE_ADR,\ + GT_BAR_MASK(a)) + +#define DISABLE_GT_BAR(block) \ + GT_WRITE(PCI_##block##_BANK_SIZE,0),\ + GT_CONFIG_WRITE(PCI_CONFIG_##block##_BASE_ADR,\ + 0x80000000) + +/* Macros to disable things we are not going to use */ +#define DISABLE_DECODE(x) GT_WRITE(x##_LO_DEC_ADR,0x7ff);\ + GT_WRITE(x##_HI_DEC_ADR,0x00) + +#define DISABLE_SUB_DECODE(x) GT_WRITE(x##_LO_DEC_ADR,0xff);\ + GT_WRITE(x##_HI_DEC_ADR,0x00) + +static void __init reset_pci(void) +{ + /* Set RESET_PCI bit high */ + writeb(readb(OVERDRIVE_CTRL) | ENABLE_PCI_BIT, OVERDRIVE_CTRL); + udelay(250); + + /* Set RESET_PCI bit low */ + writeb(readb(OVERDRIVE_CTRL) & RESET_PCI_MASK, OVERDRIVE_CTRL); + udelay(250); + + writeb(readb(OVERDRIVE_CTRL) | ENABLE_PCI_BIT, OVERDRIVE_CTRL); + udelay(250); +} + +static int write_config_to_galileo(int where, u32 val); +#define GT_CONFIG_WRITE(where,val) write_config_to_galileo(where,val) + +#define ENABLE_PCI_DRAM + + +#ifdef TEST_DRAM +/* Test function to check out if the PCI DRAM is working OK */ +static int /* __init */ test_dram(unsigned *base, unsigned size) +{ + unsigned *p = base; + unsigned *end = (unsigned *) (((unsigned) base) + size); + unsigned w; + + for (p = base; p < end; p++) { + *p = 0xffffffff; + if (*p != 0xffffffff) { + printk("AAARGH -write failed!!! at %p is %x\n", p, + *p); + return 0; + } + *p = 0x0; + if (*p != 0x0) { + printk("AAARGH -write failed!!!\n"); + return 0; + } + } + + for (p = base; p < end; p++) { + *p = (unsigned) p; + if (*p != (unsigned) p) { + printk("Failed at 0x%p, actually is 0x%x\n", p, + *p); + return 0; + } + } + + for (p = base; p < end; p++) { + w = ((unsigned) p & 0xffff0000); + *p = w | (w >> 16); + } + + for (p = base; p < end; p++) { + w = ((unsigned) p & 0xffff0000); + w |= (w >> 16); + if (*p != w) { + printk + ("Failed at 0x%p, should be 0x%x actually is 0x%x\n", + p, w, *p); + return 0; + } + } + + return 1; +} +#endif + + +/* Function to set up and initialise the galileo. This sets up the BARS, + * maps the DRAM into the address space etc,etc + */ +int __init galileo_init(void) +{ + reset_pci(); + + /* Now shift the galileo regs into this block */ + RESET_GT_WRITE(INTERNAL_SPACE_DEC, + GT_MEM_LO_ADR(GT64111_BASE_ADDRESS)); + + /* Should have a sanity check here, that you can read back at the new + * address what you just wrote + */ + + /* Disable decode for all regions */ + DISABLE_DECODE(RAS10); + DISABLE_DECODE(RAS32); + DISABLE_DECODE(CS20); + DISABLE_DECODE(CS3); + DISABLE_DECODE(PCI_IO); + DISABLE_DECODE(PCI_MEM0); + DISABLE_DECODE(PCI_MEM1); + + /* Disable all BARS */ + GT_WRITE(BAR_ENABLE_ADR, 0x1ff); + DISABLE_GT_BAR(RAS10); + DISABLE_GT_BAR(RAS32); + DISABLE_GT_BAR(CS20); + DISABLE_GT_BAR(CS3); + + /* Tell the BAR where the IO registers now are */ + GT_CONFIG_WRITE(PCI_CONFIG_INT_REG_IO_ADR,GT_BAR_MASK( + (GT64111_IO_BASE_ADDRESS & + IO_BANK_MASK))); + /* set up a 112 Mb decode */ + PROGRAM_HI_LO(PCI_MEM0, SH_BANK4_ADR, 112 * 1024 * 1024); + + /* Set up a 32 MB io space decode */ + PROGRAM_HI_LO(PCI_IO, IO_BANK_ADR, 32 * 1024 * 1024); + +#ifdef ENABLE_PCI_DRAM + /* Program up the DRAM configuration - there is DRAM only in bank 0 */ + /* Now set up the DRAM decode */ + PROGRAM_HI_LO(RAS10, PCI_DRAM_BASE, PCI_DRAM_SIZE); + /* And the sub decode */ + PROGRAM_SUB_HI_LO(RAS0, PCI_DRAM_BASE, PCI_DRAM_SIZE); + + DISABLE_SUB_DECODE(RAS1); + + /* Set refresh rate */ + GT_WRITE(DRAM_BANK0_PARMS, 0x3f); + GT_WRITE(DRAM_CFG, 0x100); + + /* we have to lob off the top bits rememeber!! */ + PROGRAM_GT_BAR(RAS10, SH4_TO_PCI(PCI_DRAM_BASE), PCI_DRAM_SIZE); + +#endif + + /* We are only interested in decoding RAS10 and the Galileo's internal + * registers (as IO) on the PCI bus + */ +#ifdef ENABLE_PCI_DRAM + GT_WRITE(BAR_ENABLE_ADR, (~((1 << 8) | (1 << 3))) & 0x1ff); +#else + GT_WRITE(BAR_ENABLE_ADR, (~(1 << 3)) & 0x1ff); +#endif + + /* Change the class code to host bridge, it actually powers up + * as a memory controller + */ + GT_CONFIG_WRITE(8, 0x06000011); + + /* Allow the galileo to master the PCI bus */ + GT_CONFIG_WRITE(PCI_COMMAND, + PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | + PCI_COMMAND_IO); + + +#if 0 + printk("Testing PCI DRAM - "); + if(test_dram(PCI_DRAM_BASE,PCI_DRAM_SIZE)) { + printk("Passed\n"); + }else { + printk("FAILED\n"); + } +#endif + return 0; + +} + + +#define SET_CONFIG_BITS(bus,devfn,where)\ + ((1<<31) | ((bus) << 16) | ((devfn) << 8) | ((where) & ~3)) + +#define CONFIG_CMD(dev, where) SET_CONFIG_BITS((dev)->bus->number,(dev)->devfn,where) + +/* This write to the galileo config registers, unlike the functions below, can + * be used before the PCI subsystem has started up + */ +static int __init write_config_to_galileo(int where, u32 val) +{ + GT_WRITE(PCI_CFG_ADR, SET_CONFIG_BITS(0, 0, where)); + + GT_WRITE(PCI_CFG_DATA, val); + return 0; +} + +/* We exclude the galileo and slot 31, the galileo because I don't know how to stop + * the setup code shagging up the setup I have done on it, and 31 because the whole + * thing locks up if you try to access that slot (which doesn't exist of course anyway + */ + +#define EXCLUDED_DEV(dev) ((dev->bus->number==0) && ((PCI_SLOT(dev->devfn)==0) || (PCI_SLOT(dev->devfn) == 31))) + +static int galileo_read_config_byte(struct pci_dev *dev, int where, + u8 * val) +{ + + + /* I suspect this doesn't work because this drives a special cycle ? */ + if (EXCLUDED_DEV(dev)) { + *val = 0xff; + return PCIBIOS_SUCCESSFUL; + } + /* Start the config cycle */ + GT_WRITE(PCI_CFG_ADR, CONFIG_CMD(dev, where)); + /* Read back the result */ + *val = GT_READ_BYTE(PCI_CFG_DATA + (where & 3)); + + return PCIBIOS_SUCCESSFUL; +} + + +static int galileo_read_config_word(struct pci_dev *dev, int where, + u16 * val) +{ + + if (EXCLUDED_DEV(dev)) { + *val = 0xffff; + return PCIBIOS_SUCCESSFUL; + } + + GT_WRITE(PCI_CFG_ADR, CONFIG_CMD(dev, where)); + *val = GT_READ_SHORT(PCI_CFG_DATA + (where & 2)); + + return PCIBIOS_SUCCESSFUL; +} + + +static int galileo_read_config_dword(struct pci_dev *dev, int where, + u32 * val) +{ + if (EXCLUDED_DEV(dev)) { + *val = 0xffffffff; + return PCIBIOS_SUCCESSFUL; + } + + GT_WRITE(PCI_CFG_ADR, CONFIG_CMD(dev, where)); + *val = GT_READ(PCI_CFG_DATA); + + return PCIBIOS_SUCCESSFUL; +} + +static int galileo_write_config_byte(struct pci_dev *dev, int where, + u8 val) +{ + GT_WRITE(PCI_CFG_ADR, CONFIG_CMD(dev, where)); + + GT_WRITE_BYTE(PCI_CFG_DATA + (where & 3), val); + + return PCIBIOS_SUCCESSFUL; +} + + +static int galileo_write_config_word(struct pci_dev *dev, int where, + u16 val) +{ + GT_WRITE(PCI_CFG_ADR, CONFIG_CMD(dev, where)); + + GT_WRITE_SHORT(PCI_CFG_DATA + (where & 2), val); + + return PCIBIOS_SUCCESSFUL; +} + +static int galileo_write_config_dword(struct pci_dev *dev, int where, + u32 val) +{ + GT_WRITE(PCI_CFG_ADR, CONFIG_CMD(dev, where)); + + GT_WRITE(PCI_CFG_DATA, val); + + return PCIBIOS_SUCCESSFUL; +} + +static struct pci_ops pci_config_ops = { + galileo_read_config_byte, + galileo_read_config_word, + galileo_read_config_dword, + galileo_write_config_byte, + galileo_write_config_word, + galileo_write_config_dword +}; + + +/* Everything hangs off this */ +static struct pci_bus *pci_root_bus; + + +static u8 __init no_swizzle(struct pci_dev *dev, u8 * pin) +{ + return PCI_SLOT(dev->devfn); +} + +static int __init map_od_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + /* Slot 1: Galileo + * Slot 2: PCI Slot 1 + * Slot 3: PCI Slot 2 + * Slot 4: ESS + */ + switch (slot) { + case 2: + return OVERDRIVE_PCI_IRQ1; + case 3: + /* Note this assumes you have a hacked card in slot 2 */ + return OVERDRIVE_PCI_IRQ2; + case 4: + return OVERDRIVE_ESS_IRQ; + default: + /* printk("PCI: Unexpected IRQ mapping request for slot %d\n", slot); */ + return -1; + } +} + + + +void __init +pcibios_fixup_pbus_ranges(struct pci_bus *bus, struct pbus_set_ranges_data *ranges) +{ + ranges->io_start -= bus->resource[0]->start; + ranges->io_end -= bus->resource[0]->start; + ranges->mem_start -= bus->resource[1]->start; + ranges->mem_end -= bus->resource[1]->start; +} + +static void __init pci_fixup_ide_bases(struct pci_dev *d) +{ + int i; + + /* + * PCI IDE controllers use non-standard I/O port decoding, respect it. + */ + if ((d->class >> 8) != PCI_CLASS_STORAGE_IDE) + return; + printk("PCI: IDE base address fixup for %s\n", pci_name(d)); + for(i=0; i<4; i++) { + struct resource *r = &d->resource[i]; + if ((r->start & ~0x80) == 0x374) { + r->start |= 2; + r->end = r->start; + } + } +} +DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_ide_bases); + +void __init pcibios_init(void) +{ + static struct resource galio,galmem; + + /* Allocate the registers used by the Galileo */ + galio.flags = IORESOURCE_IO; + galio.name = "Galileo GT64011"; + galmem.flags = IORESOURCE_MEM|IORESOURCE_PREFETCH; + galmem.name = "Galileo GT64011 DRAM"; + + allocate_resource(&ioport_resource, &galio, 256, + GT64111_IO_BASE_ADDRESS,GT64111_IO_BASE_ADDRESS+256, 256, NULL, NULL); + allocate_resource(&iomem_resource, &galmem,PCI_DRAM_SIZE, + PHYSADDR(PCI_DRAM_BASE), PHYSADDR(PCI_DRAM_BASE)+PCI_DRAM_SIZE, + PCI_DRAM_SIZE, NULL, NULL); + + /* ok, do the scan man */ + pci_root_bus = pci_scan_bus(0, &pci_config_ops, NULL); + + pci_assign_unassigned_resources(); + pci_fixup_irqs(no_swizzle, map_od_irq); + +#ifdef TEST_DRAM + printk("Testing PCI DRAM - "); + if(test_dram(PCI_DRAM_BASE,PCI_DRAM_SIZE)) { + printk("Passed\n"); + }else { + printk("FAILED\n"); + } +#endif + +} + +char * __init pcibios_setup(char *str) +{ + return str; +} + + + +int pcibios_enable_device(struct pci_dev *dev) +{ + + u16 cmd, old_cmd; + int idx; + struct resource *r; + + pci_read_config_word(dev, PCI_COMMAND, &cmd); + old_cmd = cmd; + for (idx = 0; idx < 6; idx++) { + r = dev->resource + idx; + if (!r->start && r->end) { + printk(KERN_ERR + "PCI: Device %s not available because" + " of resource collisions\n", + pci_name(dev)); + return -EINVAL; + } + if (r->flags & IORESOURCE_IO) + cmd |= PCI_COMMAND_IO; + if (r->flags & IORESOURCE_MEM) + cmd |= PCI_COMMAND_MEMORY; + } + if (cmd != old_cmd) { + printk("PCI: enabling device %s (%04x -> %04x)\n", + pci_name(dev), old_cmd, cmd); + pci_write_config_word(dev, PCI_COMMAND, cmd); + } + return 0; + +} + +/* We should do some optimisation work here I think. Ok for now though */ +void __init pcibios_fixup_bus(struct pci_bus *bus) +{ + +} + +void pcibios_align_resource(void *data, struct resource *res, + unsigned long size) +{ +} + +void __init pcibios_update_resource(struct pci_dev *dev, struct resource *root, + struct resource *res, int resource) +{ + + unsigned long where, size; + u32 reg; + + + printk("PCI: Assigning %3s %08lx to %s\n", + res->flags & IORESOURCE_IO ? "IO" : "MEM", + res->start, dev->name); + + where = PCI_BASE_ADDRESS_0 + resource * 4; + size = res->end - res->start; + + pci_read_config_dword(dev, where, ®); + reg = (reg & size) | (((u32) (res->start - root->start)) & ~size); + pci_write_config_dword(dev, where, reg); +} + + +void __init pcibios_update_irq(struct pci_dev *dev, int irq) +{ + printk("PCI: Assigning IRQ %02d to %s\n", irq, dev->name); + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq); +} + +/* + * If we set up a device for bus mastering, we need to check the latency + * timer as certain crappy BIOSes forget to set it properly. + */ +unsigned int pcibios_max_latency = 255; + +void pcibios_set_master(struct pci_dev *dev) +{ + u8 lat; + pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat); + if (lat < 16) + lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency; + else if (lat > pcibios_max_latency) + lat = pcibios_max_latency; + else + return; + printk("PCI: Setting latency timer of device %s to %d\n", pci_name(dev), lat); + pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat); +} -- cgit v1.2.3