From 47572387d58a9584c60ebbbdee56fc92c627f16f Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Thu, 25 Oct 2007 21:04:16 +0200 Subject: x86: move i386 and x86_64 Kconfig files to x86 directory After a small change in kconfig Makefile we could move all x86 Kconfig files to x86 directory. Signed-off-by: Sam Ravnborg --- arch/x86/Kconfig.cpu | 372 +++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 372 insertions(+) create mode 100644 arch/x86/Kconfig.cpu (limited to 'arch/x86/Kconfig.cpu') diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu new file mode 100644 index 00000000000..0e2adadf590 --- /dev/null +++ b/arch/x86/Kconfig.cpu @@ -0,0 +1,372 @@ +# Put here option for CPU selection and depending optimization +if !X86_ELAN + +choice + prompt "Processor family" + default M686 + +config M386 + bool "386" + depends on !UML + ---help--- + This is the processor type of your CPU. This information is used for + optimizing purposes. In order to compile a kernel that can run on + all x86 CPU types (albeit not optimally fast), you can specify + "386" here. + + The kernel will not necessarily run on earlier architectures than + the one you have chosen, e.g. a Pentium optimized kernel will run on + a PPro, but not necessarily on a i486. + + Here are the settings recommended for greatest speed: + - "386" for the AMD/Cyrix/Intel 386DX/DXL/SL/SLC/SX, Cyrix/TI + 486DLC/DLC2, UMC 486SX-S and NexGen Nx586. Only "386" kernels + will run on a 386 class machine. + - "486" for the AMD/Cyrix/IBM/Intel 486DX/DX2/DX4 or + SL/SLC/SLC2/SLC3/SX/SX2 and UMC U5D or U5S. + - "586" for generic Pentium CPUs lacking the TSC + (time stamp counter) register. + - "Pentium-Classic" for the Intel Pentium. + - "Pentium-MMX" for the Intel Pentium MMX. + - "Pentium-Pro" for the Intel Pentium Pro. + - "Pentium-II" for the Intel Pentium II or pre-Coppermine Celeron. + - "Pentium-III" for the Intel Pentium III or Coppermine Celeron. + - "Pentium-4" for the Intel Pentium 4 or P4-based Celeron. + - "K6" for the AMD K6, K6-II and K6-III (aka K6-3D). + - "Athlon" for the AMD K7 family (Athlon/Duron/Thunderbird). + - "Crusoe" for the Transmeta Crusoe series. + - "Efficeon" for the Transmeta Efficeon series. + - "Winchip-C6" for original IDT Winchip. + - "Winchip-2" for IDT Winchip 2. + - "Winchip-2A" for IDT Winchips with 3dNow! capabilities. + - "GeodeGX1" for Geode GX1 (Cyrix MediaGX). + - "Geode GX/LX" For AMD Geode GX and LX processors. + - "CyrixIII/VIA C3" for VIA Cyrix III or VIA C3. + - "VIA C3-2" for VIA C3-2 "Nehemiah" (model 9 and above). + - "VIA C7" for VIA C7. + + If you don't know what to do, choose "386". + +config M486 + bool "486" + help + Select this for a 486 series processor, either Intel or one of the + compatible processors from AMD, Cyrix, IBM, or Intel. Includes DX, + DX2, and DX4 variants; also SL/SLC/SLC2/SLC3/SX/SX2 and UMC U5D or + U5S. + +config M586 + bool "586/K5/5x86/6x86/6x86MX" + help + Select this for an 586 or 686 series processor such as the AMD K5, + the Cyrix 5x86, 6x86 and 6x86MX. This choice does not + assume the RDTSC (Read Time Stamp Counter) instruction. + +config M586TSC + bool "Pentium-Classic" + help + Select this for a Pentium Classic processor with the RDTSC (Read + Time Stamp Counter) instruction for benchmarking. + +config M586MMX + bool "Pentium-MMX" + help + Select this for a Pentium with the MMX graphics/multimedia + extended instructions. + +config M686 + bool "Pentium-Pro" + help + Select this for Intel Pentium Pro chips. This enables the use of + Pentium Pro extended instructions, and disables the init-time guard + against the f00f bug found in earlier Pentiums. + +config MPENTIUMII + bool "Pentium-II/Celeron(pre-Coppermine)" + help + Select this for Intel chips based on the Pentium-II and + pre-Coppermine Celeron core. This option enables an unaligned + copy optimization, compiles the kernel with optimization flags + tailored for the chip, and applies any applicable Pentium Pro + optimizations. + +config MPENTIUMIII + bool "Pentium-III/Celeron(Coppermine)/Pentium-III Xeon" + help + Select this for Intel chips based on the Pentium-III and + Celeron-Coppermine core. This option enables use of some + extended prefetch instructions in addition to the Pentium II + extensions. + +config MPENTIUMM + bool "Pentium M" + help + Select this for Intel Pentium M (not Pentium-4 M) + notebook chips. + +config MCORE2 + bool "Core 2/newer Xeon" + help + Select this for Intel Core 2 and newer Core 2 Xeons (Xeon 51xx and 53xx) + CPUs. You can distinguish newer from older Xeons by the CPU family + in /proc/cpuinfo. Newer ones have 6 and older ones 15 (not a typo) + +config MPENTIUM4 + bool "Pentium-4/Celeron(P4-based)/Pentium-4 M/older Xeon" + help + Select this for Intel Pentium 4 chips. This includes the + Pentium 4, Pentium D, P4-based Celeron and Xeon, and + Pentium-4 M (not Pentium M) chips. This option enables compile + flags optimized for the chip, uses the correct cache line size, and + applies any applicable optimizations. + + CPUIDs: F[0-6][1-A] (in /proc/cpuinfo show = cpu family : 15 ) + + Select this for: + Pentiums (Pentium 4, Pentium D, Celeron, Celeron D) corename: + -Willamette + -Northwood + -Mobile Pentium 4 + -Mobile Pentium 4 M + -Extreme Edition (Gallatin) + -Prescott + -Prescott 2M + -Cedar Mill + -Presler + -Smithfiled + Xeons (Intel Xeon, Xeon MP, Xeon LV, Xeon MV) corename: + -Foster + -Prestonia + -Gallatin + -Nocona + -Irwindale + -Cranford + -Potomac + -Paxville + -Dempsey + + +config MK6 + bool "K6/K6-II/K6-III" + help + Select this for an AMD K6-family processor. Enables use of + some extended instructions, and passes appropriate optimization + flags to GCC. + +config MK7 + bool "Athlon/Duron/K7" + help + Select this for an AMD Athlon K7-family processor. Enables use of + some extended instructions, and passes appropriate optimization + flags to GCC. + +config MK8 + bool "Opteron/Athlon64/Hammer/K8" + help + Select this for an AMD Opteron or Athlon64 Hammer-family processor. Enables + use of some extended instructions, and passes appropriate optimization + flags to GCC. + +config MCRUSOE + bool "Crusoe" + help + Select this for a Transmeta Crusoe processor. Treats the processor + like a 586 with TSC, and sets some GCC optimization flags (like a + Pentium Pro with no alignment requirements). + +config MEFFICEON + bool "Efficeon" + help + Select this for a Transmeta Efficeon processor. + +config MWINCHIPC6 + bool "Winchip-C6" + help + Select this for an IDT Winchip C6 chip. Linux and GCC + treat this chip as a 586TSC with some extended instructions + and alignment requirements. + +config MWINCHIP2 + bool "Winchip-2" + help + Select this for an IDT Winchip-2. Linux and GCC + treat this chip as a 586TSC with some extended instructions + and alignment requirements. + +config MWINCHIP3D + bool "Winchip-2A/Winchip-3" + help + Select this for an IDT Winchip-2A or 3. Linux and GCC + treat this chip as a 586TSC with some extended instructions + and alignment requirements. Also enable out of order memory + stores for this CPU, which can increase performance of some + operations. + +config MGEODEGX1 + bool "GeodeGX1" + help + Select this for a Geode GX1 (Cyrix MediaGX) chip. + +config MGEODE_LX + bool "Geode GX/LX" + help + Select this for AMD Geode GX and LX processors. + +config MCYRIXIII + bool "CyrixIII/VIA-C3" + help + Select this for a Cyrix III or C3 chip. Presently Linux and GCC + treat this chip as a generic 586. Whilst the CPU is 686 class, + it lacks the cmov extension which gcc assumes is present when + generating 686 code. + Note that Nehemiah (Model 9) and above will not boot with this + kernel due to them lacking the 3DNow! instructions used in earlier + incarnations of the CPU. + +config MVIAC3_2 + bool "VIA C3-2 (Nehemiah)" + help + Select this for a VIA C3 "Nehemiah". Selecting this enables usage + of SSE and tells gcc to treat the CPU as a 686. + Note, this kernel will not boot on older (pre model 9) C3s. + +config MVIAC7 + bool "VIA C7" + help + Select this for a VIA C7. Selecting this uses the correct cache + shift and tells gcc to treat the CPU as a 686. + +endchoice + +config X86_GENERIC + bool "Generic x86 support" + help + Instead of just including optimizations for the selected + x86 variant (e.g. PII, Crusoe or Athlon), include some more + generic optimizations as well. This will make the kernel + perform better on x86 CPUs other than that selected. + + This is really intended for distributors who need more + generic optimizations. + +endif + +# +# Define implied options from the CPU selection here +# +config X86_CMPXCHG + bool + depends on !M386 + default y + +config X86_L1_CACHE_SHIFT + int + default "7" if MPENTIUM4 || X86_GENERIC + default "4" if X86_ELAN || M486 || M386 || MGEODEGX1 + default "5" if MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCRUSOE || MEFFICEON || MCYRIXIII || MK6 || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || M586 || MVIAC3_2 || MGEODE_LX + default "6" if MK7 || MK8 || MPENTIUMM || MCORE2 || MVIAC7 + +config X86_XADD + bool + depends on !M386 + default y + +config RWSEM_GENERIC_SPINLOCK + bool + depends on !X86_XADD + default y + +config RWSEM_XCHGADD_ALGORITHM + bool + depends on X86_XADD + default y + +config ARCH_HAS_ILOG2_U32 + bool + default n + +config ARCH_HAS_ILOG2_U64 + bool + default n + +config GENERIC_CALIBRATE_DELAY + bool + default y + +config X86_PPRO_FENCE + bool + depends on M686 || M586MMX || M586TSC || M586 || M486 || M386 || MGEODEGX1 + default y + +config X86_F00F_BUG + bool + depends on M586MMX || M586TSC || M586 || M486 || M386 + default y + +config X86_WP_WORKS_OK + bool + depends on !M386 + default y + +config X86_INVLPG + bool + depends on !M386 + default y + +config X86_BSWAP + bool + depends on !M386 + default y + +config X86_POPAD_OK + bool + depends on !M386 + default y + +config X86_ALIGNMENT_16 + bool + depends on MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCYRIXIII || X86_ELAN || MK6 || M586MMX || M586TSC || M586 || M486 || MVIAC3_2 || MGEODEGX1 + default y + +config X86_GOOD_APIC + bool + depends on MK7 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || MK8 || MEFFICEON || MCORE2 || MVIAC7 + default y + +config X86_INTEL_USERCOPY + bool + depends on MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M586MMX || X86_GENERIC || MK8 || MK7 || MEFFICEON || MCORE2 + default y + +config X86_USE_PPRO_CHECKSUM + bool + depends on MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MK8 || MVIAC3_2 || MEFFICEON || MGEODE_LX || MCORE2 + default y + +config X86_USE_3DNOW + bool + depends on (MCYRIXIII || MK7 || MGEODE_LX) && !UML + default y + +config X86_OOSTORE + bool + depends on (MWINCHIP3D || MWINCHIP2 || MWINCHIPC6) && MTRR + default y + +config X86_TSC + bool + depends on (MWINCHIP3D || MWINCHIP2 || MCRUSOE || MEFFICEON || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MVIAC3_2 || MVIAC7 || MGEODEGX1 || MGEODE_LX || MCORE2) && !X86_NUMAQ + default y + +# this should be set for all -march=.. options where the compiler +# generates cmov. +config X86_CMOV + bool + depends on (MK7 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MVIAC3_2 || MVIAC7) + default y + +config X86_MINIMUM_CPU_FAMILY + int + default "4" if X86_XADD || X86_CMPXCHG || X86_BSWAP || X86_WP_WORKS_OK + default "3" + -- cgit v1.2.3