From f10fcd47120e80f66665567dbe17f5071c7aef52 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 13 Jan 2009 20:41:34 +0900 Subject: x86: make early_per_cpu() a lvalue and use it Make early_per_cpu() a lvalue as per_cpu() is and use it where applicable. Signed-off-by: Tejun Heo Signed-off-by: Ingo Molnar --- arch/x86/include/asm/percpu.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch/x86/include/asm/percpu.h') diff --git a/arch/x86/include/asm/percpu.h b/arch/x86/include/asm/percpu.h index ece72053ba6..df644f3e53e 100644 --- a/arch/x86/include/asm/percpu.h +++ b/arch/x86/include/asm/percpu.h @@ -195,9 +195,9 @@ do { \ #define early_per_cpu_ptr(_name) (_name##_early_ptr) #define early_per_cpu_map(_name, _idx) (_name##_early_map[_idx]) #define early_per_cpu(_name, _cpu) \ - (early_per_cpu_ptr(_name) ? \ - early_per_cpu_ptr(_name)[_cpu] : \ - per_cpu(_name, _cpu)) + *(early_per_cpu_ptr(_name) ? \ + &early_per_cpu_ptr(_name)[_cpu] : \ + &per_cpu(_name, _cpu)) #else /* !CONFIG_SMP */ #define DEFINE_EARLY_PER_CPU(_type, _name, _initvalue) \ -- cgit v1.2.3 From 1a51e3a0aed18767cf2762e95456ecfeb0bca5e6 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 13 Jan 2009 20:41:35 +0900 Subject: x86: fold pda into percpu area on SMP [ Based on original patch from Christoph Lameter and Mike Travis. ] Currently pdas and percpu areas are allocated separately. %gs points to local pda and percpu area can be reached using pda->data_offset. This patch folds pda into percpu area. Due to strange gcc requirement, pda needs to be at the beginning of the percpu area so that pda->stack_canary is at %gs:40. To achieve this, a new percpu output section macro - PERCPU_VADDR_PREALLOC() - is added and used to reserve pda sized chunk at the start of the percpu area. After this change, for boot cpu, %gs first points to pda in the data.init area and later during setup_per_cpu_areas() gets updated to point to the actual pda. This means that setup_per_cpu_areas() need to reload %gs for CPU0 while clearing pda area for other cpus as cpu0 already has modified it when control reaches setup_per_cpu_areas(). This patch also removes now unnecessary get_local_pda() and its call sites. A lot of this patch is taken from Mike Travis' "x86_64: Fold pda into per cpu area" patch. Signed-off-by: Tejun Heo Signed-off-by: Ingo Molnar --- arch/x86/include/asm/percpu.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch/x86/include/asm/percpu.h') diff --git a/arch/x86/include/asm/percpu.h b/arch/x86/include/asm/percpu.h index df644f3e53e..0ed77cf33f7 100644 --- a/arch/x86/include/asm/percpu.h +++ b/arch/x86/include/asm/percpu.h @@ -1,6 +1,14 @@ #ifndef _ASM_X86_PERCPU_H #define _ASM_X86_PERCPU_H +#ifndef __ASSEMBLY__ +#ifdef CONFIG_X86_64 +extern void load_pda_offset(int cpu); +#else +static inline void load_pda_offset(int cpu) { } +#endif +#endif + #ifdef CONFIG_X86_64 #include -- cgit v1.2.3 From 9939ddaff52787b2a7c1adf1b2afc95421aa0884 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 13 Jan 2009 20:41:35 +0900 Subject: x86: merge 64 and 32 SMP percpu handling Now that pda is allocated as part of percpu, percpu doesn't need to be accessed through pda. Unify x86_64 SMP percpu access with x86_32 SMP one. Other than the segment register, operand size and the base of percpu symbols, they behave identical now. This patch replaces now unnecessary pda->data_offset with a dummy field which is necessary to keep stack_canary at its place. This patch also moves per_cpu_offset initialization out of init_gdt() into setup_per_cpu_areas(). Note that this change also necessitates explicit per_cpu_offset initializations in voyager_smp.c. With this change, x86_OP_percpu()'s are as efficient on x86_64 as on x86_32 and also x86_64 can use assembly PER_CPU macros. Signed-off-by: Tejun Heo Signed-off-by: Ingo Molnar --- arch/x86/include/asm/percpu.h | 127 +++++++++++++----------------------------- 1 file changed, 39 insertions(+), 88 deletions(-) (limited to 'arch/x86/include/asm/percpu.h') diff --git a/arch/x86/include/asm/percpu.h b/arch/x86/include/asm/percpu.h index 0ed77cf33f7..556f84b9ea9 100644 --- a/arch/x86/include/asm/percpu.h +++ b/arch/x86/include/asm/percpu.h @@ -1,62 +1,13 @@ #ifndef _ASM_X86_PERCPU_H #define _ASM_X86_PERCPU_H -#ifndef __ASSEMBLY__ #ifdef CONFIG_X86_64 -extern void load_pda_offset(int cpu); +#define __percpu_seg gs +#define __percpu_mov_op movq #else -static inline void load_pda_offset(int cpu) { } -#endif -#endif - -#ifdef CONFIG_X86_64 -#include - -/* Same as asm-generic/percpu.h, except that we store the per cpu offset - in the PDA. Longer term the PDA and every per cpu variable - should be just put into a single section and referenced directly - from %gs */ - -#ifdef CONFIG_SMP -#include - -#define __per_cpu_offset(cpu) (cpu_pda(cpu)->data_offset) -#define __my_cpu_offset read_pda(data_offset) - -#define per_cpu_offset(x) (__per_cpu_offset(x)) - +#define __percpu_seg fs +#define __percpu_mov_op movl #endif -#include - -DECLARE_PER_CPU(struct x8664_pda, pda); - -/* - * These are supposed to be implemented as a single instruction which - * operates on the per-cpu data base segment. x86-64 doesn't have - * that yet, so this is a fairly inefficient workaround for the - * meantime. The single instruction is atomic with respect to - * preemption and interrupts, so we need to explicitly disable - * interrupts here to achieve the same effect. However, because it - * can be used from within interrupt-disable/enable, we can't actually - * disable interrupts; disabling preemption is enough. - */ -#define x86_read_percpu(var) \ - ({ \ - typeof(per_cpu_var(var)) __tmp; \ - preempt_disable(); \ - __tmp = __get_cpu_var(var); \ - preempt_enable(); \ - __tmp; \ - }) - -#define x86_write_percpu(var, val) \ - do { \ - preempt_disable(); \ - __get_cpu_var(var) = (val); \ - preempt_enable(); \ - } while(0) - -#else /* CONFIG_X86_64 */ #ifdef __ASSEMBLY__ @@ -73,42 +24,26 @@ DECLARE_PER_CPU(struct x8664_pda, pda); * PER_CPU(cpu_gdt_descr, %ebx) */ #ifdef CONFIG_SMP -#define PER_CPU(var, reg) \ - movl %fs:per_cpu__##this_cpu_off, reg; \ +#define PER_CPU(var, reg) \ + __percpu_mov_op %__percpu_seg:per_cpu__this_cpu_off, reg; \ lea per_cpu__##var(reg), reg -#define PER_CPU_VAR(var) %fs:per_cpu__##var +#define PER_CPU_VAR(var) %__percpu_seg:per_cpu__##var #else /* ! SMP */ -#define PER_CPU(var, reg) \ - movl $per_cpu__##var, reg +#define PER_CPU(var, reg) \ + __percpu_mov_op $per_cpu__##var, reg #define PER_CPU_VAR(var) per_cpu__##var #endif /* SMP */ #else /* ...!ASSEMBLY */ -/* - * PER_CPU finds an address of a per-cpu variable. - * - * Args: - * var - variable name - * cpu - 32bit register containing the current CPU number - * - * The resulting address is stored in the "cpu" argument. - * - * Example: - * PER_CPU(cpu_gdt_descr, %ebx) - */ -#ifdef CONFIG_SMP - -#define __my_cpu_offset x86_read_percpu(this_cpu_off) - -/* fs segment starts at (positive) offset == __per_cpu_offset[cpu] */ -#define __percpu_seg "%%fs:" +#include -#else /* !SMP */ - -#define __percpu_seg "" - -#endif /* SMP */ +#ifdef CONFIG_SMP +#define __percpu_seg_str "%%"__stringify(__percpu_seg)":" +#define __my_cpu_offset x86_read_percpu(this_cpu_off) +#else +#define __percpu_seg_str +#endif #include @@ -128,20 +63,25 @@ do { \ } \ switch (sizeof(var)) { \ case 1: \ - asm(op "b %1,"__percpu_seg"%0" \ + asm(op "b %1,"__percpu_seg_str"%0" \ : "+m" (var) \ : "ri" ((T__)val)); \ break; \ case 2: \ - asm(op "w %1,"__percpu_seg"%0" \ + asm(op "w %1,"__percpu_seg_str"%0" \ : "+m" (var) \ : "ri" ((T__)val)); \ break; \ case 4: \ - asm(op "l %1,"__percpu_seg"%0" \ + asm(op "l %1,"__percpu_seg_str"%0" \ : "+m" (var) \ : "ri" ((T__)val)); \ break; \ + case 8: \ + asm(op "q %1,"__percpu_seg_str"%0" \ + : "+m" (var) \ + : "r" ((T__)val)); \ + break; \ default: __bad_percpu_size(); \ } \ } while (0) @@ -151,17 +91,22 @@ do { \ typeof(var) ret__; \ switch (sizeof(var)) { \ case 1: \ - asm(op "b "__percpu_seg"%1,%0" \ + asm(op "b "__percpu_seg_str"%1,%0" \ : "=r" (ret__) \ : "m" (var)); \ break; \ case 2: \ - asm(op "w "__percpu_seg"%1,%0" \ + asm(op "w "__percpu_seg_str"%1,%0" \ : "=r" (ret__) \ : "m" (var)); \ break; \ case 4: \ - asm(op "l "__percpu_seg"%1,%0" \ + asm(op "l "__percpu_seg_str"%1,%0" \ + : "=r" (ret__) \ + : "m" (var)); \ + break; \ + case 8: \ + asm(op "q "__percpu_seg_str"%1,%0" \ : "=r" (ret__) \ : "m" (var)); \ break; \ @@ -175,8 +120,14 @@ do { \ #define x86_add_percpu(var, val) percpu_to_op("add", per_cpu__##var, val) #define x86_sub_percpu(var, val) percpu_to_op("sub", per_cpu__##var, val) #define x86_or_percpu(var, val) percpu_to_op("or", per_cpu__##var, val) + +#ifdef CONFIG_X86_64 +extern void load_pda_offset(int cpu); +#else +static inline void load_pda_offset(int cpu) { } +#endif + #endif /* !__ASSEMBLY__ */ -#endif /* !CONFIG_X86_64 */ #ifdef CONFIG_SMP -- cgit v1.2.3 From 49357d19e4fb31e28796eaff83499e7584c26878 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 13 Jan 2009 20:41:35 +0900 Subject: x86: convert pda ops to wrappers around x86 percpu accessors pda is now a percpu variable and there's no reason it can't use plain x86 percpu accessors. Add x86_test_and_clear_bit_percpu() and replace pda op implementations with wrappers around x86 percpu accessors. Signed-off-by: Tejun Heo Signed-off-by: Ingo Molnar --- arch/x86/include/asm/percpu.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'arch/x86/include/asm/percpu.h') diff --git a/arch/x86/include/asm/percpu.h b/arch/x86/include/asm/percpu.h index 556f84b9ea9..328b31a429d 100644 --- a/arch/x86/include/asm/percpu.h +++ b/arch/x86/include/asm/percpu.h @@ -121,6 +121,16 @@ do { \ #define x86_sub_percpu(var, val) percpu_to_op("sub", per_cpu__##var, val) #define x86_or_percpu(var, val) percpu_to_op("or", per_cpu__##var, val) +/* This is not atomic against other CPUs -- CPU preemption needs to be off */ +#define x86_test_and_clear_bit_percpu(bit, var) \ +({ \ + int old__; \ + asm volatile("btr %1,"__percpu_seg_str"%c2\n\tsbbl %0,%0" \ + : "=r" (old__) \ + : "dIr" (bit), "i" (&per_cpu__##var) : "memory"); \ + old__; \ +}) + #ifdef CONFIG_X86_64 extern void load_pda_offset(int cpu); #else -- cgit v1.2.3 From 6dbde3530850d4d8bfc1b6bd4006d92786a2787f Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Thu, 15 Jan 2009 22:15:53 +0900 Subject: percpu: add optimized generic percpu accessors It is an optimization and a cleanup, and adds the following new generic percpu methods: percpu_read() percpu_write() percpu_add() percpu_sub() percpu_and() percpu_or() percpu_xor() and implements support for them on x86. (other architectures will fall back to a default implementation) The advantage is that for example to read a local percpu variable, instead of this sequence: return __get_cpu_var(var); ffffffff8102ca2b: 48 8b 14 fd 80 09 74 mov -0x7e8bf680(,%rdi,8),%rdx ffffffff8102ca32: 81 ffffffff8102ca33: 48 c7 c0 d8 59 00 00 mov $0x59d8,%rax ffffffff8102ca3a: 48 8b 04 10 mov (%rax,%rdx,1),%rax We can get a single instruction by using the optimized variants: return percpu_read(var); ffffffff8102ca3f: 65 48 8b 05 91 8f fd mov %gs:0x7efd8f91(%rip),%rax I also cleaned up the x86-specific APIs and made the x86 code use these new generic percpu primitives. tj: * fixed generic percpu_sub() definition as Roel Kluin pointed out * added percpu_and() for completeness's sake * made generic percpu ops atomic against preemption Signed-off-by: Ingo Molnar Signed-off-by: Tejun Heo --- arch/x86/include/asm/percpu.h | 24 +++++++++++++----------- 1 file changed, 13 insertions(+), 11 deletions(-) (limited to 'arch/x86/include/asm/percpu.h') diff --git a/arch/x86/include/asm/percpu.h b/arch/x86/include/asm/percpu.h index 328b31a429d..03aa4b00a1c 100644 --- a/arch/x86/include/asm/percpu.h +++ b/arch/x86/include/asm/percpu.h @@ -40,16 +40,11 @@ #ifdef CONFIG_SMP #define __percpu_seg_str "%%"__stringify(__percpu_seg)":" -#define __my_cpu_offset x86_read_percpu(this_cpu_off) +#define __my_cpu_offset percpu_read(this_cpu_off) #else #define __percpu_seg_str #endif -#include - -/* We can use this directly for local CPU (faster). */ -DECLARE_PER_CPU(unsigned long, this_cpu_off); - /* For arch-specific code, we can use direct single-insn ops (they * don't give an lvalue though). */ extern void __bad_percpu_size(void); @@ -115,11 +110,13 @@ do { \ ret__; \ }) -#define x86_read_percpu(var) percpu_from_op("mov", per_cpu__##var) -#define x86_write_percpu(var, val) percpu_to_op("mov", per_cpu__##var, val) -#define x86_add_percpu(var, val) percpu_to_op("add", per_cpu__##var, val) -#define x86_sub_percpu(var, val) percpu_to_op("sub", per_cpu__##var, val) -#define x86_or_percpu(var, val) percpu_to_op("or", per_cpu__##var, val) +#define percpu_read(var) percpu_from_op("mov", per_cpu__##var) +#define percpu_write(var, val) percpu_to_op("mov", per_cpu__##var, val) +#define percpu_add(var, val) percpu_to_op("add", per_cpu__##var, val) +#define percpu_sub(var, val) percpu_to_op("sub", per_cpu__##var, val) +#define percpu_and(var, val) percpu_to_op("and", per_cpu__##var, val) +#define percpu_or(var, val) percpu_to_op("or", per_cpu__##var, val) +#define percpu_xor(var, val) percpu_to_op("xor", per_cpu__##var, val) /* This is not atomic against other CPUs -- CPU preemption needs to be off */ #define x86_test_and_clear_bit_percpu(bit, var) \ @@ -131,6 +128,11 @@ do { \ old__; \ }) +#include + +/* We can use this directly for local CPU (faster). */ +DECLARE_PER_CPU(unsigned long, this_cpu_off); + #ifdef CONFIG_X86_64 extern void load_pda_offset(int cpu); #else -- cgit v1.2.3 From 87b264065880fa696c121dad8498a60524e0f6de Mon Sep 17 00:00:00 2001 From: Brian Gerst Date: Mon, 19 Jan 2009 00:38:59 +0900 Subject: x86-64: Use absolute displacements for per-cpu accesses. Accessing memory through %gs should not use rip-relative addressing. Adding a P prefix for the argument tells gcc to not add (%rip) to the memory references. Signed-off-by: Brian Gerst Signed-off-by: Tejun Heo --- arch/x86/include/asm/percpu.h | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) (limited to 'arch/x86/include/asm/percpu.h') diff --git a/arch/x86/include/asm/percpu.h b/arch/x86/include/asm/percpu.h index 03aa4b00a1c..165d5272ece 100644 --- a/arch/x86/include/asm/percpu.h +++ b/arch/x86/include/asm/percpu.h @@ -39,10 +39,10 @@ #include #ifdef CONFIG_SMP -#define __percpu_seg_str "%%"__stringify(__percpu_seg)":" +#define __percpu_arg(x) "%%"__stringify(__percpu_seg)":%P" #x #define __my_cpu_offset percpu_read(this_cpu_off) #else -#define __percpu_seg_str +#define __percpu_arg(x) "%" #x #endif /* For arch-specific code, we can use direct single-insn ops (they @@ -58,22 +58,22 @@ do { \ } \ switch (sizeof(var)) { \ case 1: \ - asm(op "b %1,"__percpu_seg_str"%0" \ + asm(op "b %1,"__percpu_arg(0) \ : "+m" (var) \ : "ri" ((T__)val)); \ break; \ case 2: \ - asm(op "w %1,"__percpu_seg_str"%0" \ + asm(op "w %1,"__percpu_arg(0) \ : "+m" (var) \ : "ri" ((T__)val)); \ break; \ case 4: \ - asm(op "l %1,"__percpu_seg_str"%0" \ + asm(op "l %1,"__percpu_arg(0) \ : "+m" (var) \ : "ri" ((T__)val)); \ break; \ case 8: \ - asm(op "q %1,"__percpu_seg_str"%0" \ + asm(op "q %1,"__percpu_arg(0) \ : "+m" (var) \ : "r" ((T__)val)); \ break; \ @@ -86,22 +86,22 @@ do { \ typeof(var) ret__; \ switch (sizeof(var)) { \ case 1: \ - asm(op "b "__percpu_seg_str"%1,%0" \ + asm(op "b "__percpu_arg(1)",%0" \ : "=r" (ret__) \ : "m" (var)); \ break; \ case 2: \ - asm(op "w "__percpu_seg_str"%1,%0" \ + asm(op "w "__percpu_arg(1)",%0" \ : "=r" (ret__) \ : "m" (var)); \ break; \ case 4: \ - asm(op "l "__percpu_seg_str"%1,%0" \ + asm(op "l "__percpu_arg(1)",%0" \ : "=r" (ret__) \ : "m" (var)); \ break; \ case 8: \ - asm(op "q "__percpu_seg_str"%1,%0" \ + asm(op "q "__percpu_arg(1)",%0" \ : "=r" (ret__) \ : "m" (var)); \ break; \ @@ -122,9 +122,9 @@ do { \ #define x86_test_and_clear_bit_percpu(bit, var) \ ({ \ int old__; \ - asm volatile("btr %1,"__percpu_seg_str"%c2\n\tsbbl %0,%0" \ - : "=r" (old__) \ - : "dIr" (bit), "i" (&per_cpu__##var) : "memory"); \ + asm volatile("btr %2,"__percpu_arg(1)"\n\tsbbl %0,%0" \ + : "=r" (old__), "+m" (per_cpu__##var) \ + : "dIr" (bit)); \ old__; \ }) -- cgit v1.2.3 From 947e76cdc34c782fc947313d4331380686eebbad Mon Sep 17 00:00:00 2001 From: Brian Gerst Date: Mon, 19 Jan 2009 12:21:28 +0900 Subject: x86: move stack_canary into irq_stack Impact: x86_64 percpu area layout change, irq_stack now at the beginning Now that the PDA is empty except for the stack canary, it can be removed. The irqstack is moved to the start of the per-cpu section. If the stack protector is enabled, the canary overlaps the bottom 48 bytes of the irqstack. tj: * updated subject * dropped asm relocation of irq_stack_ptr * updated comments a bit * rebased on top of stack canary changes Signed-off-by: Brian Gerst Signed-off-by: Tejun Heo --- arch/x86/include/asm/percpu.h | 6 ------ 1 file changed, 6 deletions(-) (limited to 'arch/x86/include/asm/percpu.h') diff --git a/arch/x86/include/asm/percpu.h b/arch/x86/include/asm/percpu.h index 165d5272ece..ce980db5e59 100644 --- a/arch/x86/include/asm/percpu.h +++ b/arch/x86/include/asm/percpu.h @@ -133,12 +133,6 @@ do { \ /* We can use this directly for local CPU (faster). */ DECLARE_PER_CPU(unsigned long, this_cpu_off); -#ifdef CONFIG_X86_64 -extern void load_pda_offset(int cpu); -#else -static inline void load_pda_offset(int cpu) { } -#endif - #endif /* !__ASSEMBLY__ */ #ifdef CONFIG_SMP -- cgit v1.2.3 From 299e26992a737804e13e74fdb97cdab470ed19ac Mon Sep 17 00:00:00 2001 From: Brian Gerst Date: Wed, 21 Jan 2009 17:26:05 +0900 Subject: x86: fix percpu_write with 64-bit constants Impact: slightly better code generation for percpu_to_op() The processor will sign-extend 32-bit immediate values in 64-bit operations. Use the 'e' constraint ("32-bit signed integer constant, or a symbolic reference known to fit that range") for 64-bit constants. Signed-off-by: Brian Gerst Signed-off-by: Tejun Heo --- arch/x86/include/asm/percpu.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/x86/include/asm/percpu.h') diff --git a/arch/x86/include/asm/percpu.h b/arch/x86/include/asm/percpu.h index ce980db5e59..0b64af4f13a 100644 --- a/arch/x86/include/asm/percpu.h +++ b/arch/x86/include/asm/percpu.h @@ -75,7 +75,7 @@ do { \ case 8: \ asm(op "q %1,"__percpu_arg(0) \ : "+m" (var) \ - : "r" ((T__)val)); \ + : "re" ((T__)val)); \ break; \ default: __bad_percpu_size(); \ } \ -- cgit v1.2.3 From 2add8e235cbe0dcd672c33fc322754e15500238c Mon Sep 17 00:00:00 2001 From: Brian Gerst Date: Sun, 8 Feb 2009 09:58:39 -0500 Subject: x86: use linker to offset symbols by __per_cpu_load Impact: cleanup and bug fix Use the linker to create symbols for certain per-cpu variables that are offset by __per_cpu_load. This allows the removal of the runtime fixup of the GDT pointer, which fixes a bug with resume reported by Jiri Slaby. Reported-by: Jiri Slaby Signed-off-by: Brian Gerst Acked-by: Jiri Slaby Signed-off-by: Ingo Molnar --- arch/x86/include/asm/percpu.h | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) (limited to 'arch/x86/include/asm/percpu.h') diff --git a/arch/x86/include/asm/percpu.h b/arch/x86/include/asm/percpu.h index 0b64af4f13a..aee103b26d0 100644 --- a/arch/x86/include/asm/percpu.h +++ b/arch/x86/include/asm/percpu.h @@ -34,6 +34,12 @@ #define PER_CPU_VAR(var) per_cpu__##var #endif /* SMP */ +#ifdef CONFIG_X86_64_SMP +#define INIT_PER_CPU_VAR(var) init_per_cpu__##var +#else +#define INIT_PER_CPU_VAR(var) per_cpu__##var +#endif + #else /* ...!ASSEMBLY */ #include @@ -45,6 +51,22 @@ #define __percpu_arg(x) "%" #x #endif +/* + * Initialized pointers to per-cpu variables needed for the boot + * processor need to use these macros to get the proper address + * offset from __per_cpu_load on SMP. + * + * There also must be an entry in vmlinux_64.lds.S + */ +#define DECLARE_INIT_PER_CPU(var) \ + extern typeof(per_cpu_var(var)) init_per_cpu_var(var) + +#ifdef CONFIG_X86_64_SMP +#define init_per_cpu_var(var) init_per_cpu__##var +#else +#define init_per_cpu_var(var) per_cpu_var(var) +#endif + /* For arch-specific code, we can use direct single-insn ops (they * don't give an lvalue though). */ extern void __bad_percpu_size(void); -- cgit v1.2.3 From 11124411aa95827404d6bfdfc14c908e1b54513c Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 20 Feb 2009 16:29:09 +0900 Subject: x86: convert to the new dynamic percpu allocator Impact: use new dynamic allocator, unified access to static/dynamic percpu memory Convert to the new dynamic percpu allocator. * implement populate_extra_pte() for both 32 and 64 * update setup_per_cpu_areas() to use pcpu_setup_static() * define __addr_to_pcpu_ptr() and __pcpu_ptr_to_addr() * define config HAVE_DYNAMIC_PER_CPU_AREA Signed-off-by: Tejun Heo --- arch/x86/include/asm/percpu.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch/x86/include/asm/percpu.h') diff --git a/arch/x86/include/asm/percpu.h b/arch/x86/include/asm/percpu.h index aee103b26d0..8f1d2fbec1d 100644 --- a/arch/x86/include/asm/percpu.h +++ b/arch/x86/include/asm/percpu.h @@ -43,6 +43,14 @@ #else /* ...!ASSEMBLY */ #include +#include + +#define __addr_to_pcpu_ptr(addr) \ + (void *)((unsigned long)(addr) - (unsigned long)pcpu_base_addr \ + + (unsigned long)__per_cpu_start) +#define __pcpu_ptr_to_addr(ptr) \ + (void *)((unsigned long)(ptr) + (unsigned long)pcpu_base_addr \ + - (unsigned long)__per_cpu_start) #ifdef CONFIG_SMP #define __percpu_arg(x) "%%"__stringify(__percpu_seg)":%P" #x -- cgit v1.2.3