From 31cb45ef2600d47191d51253ec94b5e3f689260d Mon Sep 17 00:00:00 2001 From: Pekka Enberg Date: Thu, 9 Apr 2009 11:52:28 +0300 Subject: x86: unify irqinit_{32,64}.c into irqinit.c Impact: cleanup Reviewed-by Cyrill Gorcunov Signed-off-by: Pekka Enberg Signed-off-by: Ingo Molnar --- arch/x86/kernel/irqinit.c | 277 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 277 insertions(+) create mode 100644 arch/x86/kernel/irqinit.c (limited to 'arch/x86/kernel/irqinit.c') diff --git a/arch/x86/kernel/irqinit.c b/arch/x86/kernel/irqinit.c new file mode 100644 index 00000000000..f3be5e97427 --- /dev/null +++ b/arch/x86/kernel/irqinit.c @@ -0,0 +1,277 @@ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * ISA PIC or low IO-APIC triggered (INTA-cycle or APIC) interrupts: + * (these are usually mapped to vectors 0x30-0x3f) + */ + +/* + * The IO-APIC gives us many more interrupt sources. Most of these + * are unused but an SMP system is supposed to have enough memory ... + * sometimes (mostly wrt. hw bugs) we get corrupted vectors all + * across the spectrum, so we really want to be prepared to get all + * of these. Plus, more powerful systems might have more than 64 + * IO-APIC registers. + * + * (these are usually mapped into the 0x30-0xff vector range) + */ + +#ifdef CONFIG_X86_32 +/* + * Note that on a 486, we don't want to do a SIGFPE on an irq13 + * as the irq is unreliable, and exception 16 works correctly + * (ie as explained in the intel literature). On a 386, you + * can't use exception 16 due to bad IBM design, so we have to + * rely on the less exact irq13. + * + * Careful.. Not only is IRQ13 unreliable, but it is also + * leads to races. IBM designers who came up with it should + * be shot. + */ + +static irqreturn_t math_error_irq(int cpl, void *dev_id) +{ + outb(0, 0xF0); + if (ignore_fpu_irq || !boot_cpu_data.hard_math) + return IRQ_NONE; + math_error((void __user *)get_irq_regs()->ip); + return IRQ_HANDLED; +} + +/* + * New motherboards sometimes make IRQ 13 be a PCI interrupt, + * so allow interrupt sharing. + */ +static struct irqaction fpu_irq = { + .handler = math_error_irq, + .name = "fpu", +}; +#endif + +/* + * IRQ2 is cascade interrupt to second interrupt controller + */ +static struct irqaction irq2 = { + .handler = no_action, + .name = "cascade", +}; + +DEFINE_PER_CPU(vector_irq_t, vector_irq) = { + [0 ... IRQ0_VECTOR - 1] = -1, + [IRQ0_VECTOR] = 0, + [IRQ1_VECTOR] = 1, + [IRQ2_VECTOR] = 2, + [IRQ3_VECTOR] = 3, + [IRQ4_VECTOR] = 4, + [IRQ5_VECTOR] = 5, + [IRQ6_VECTOR] = 6, + [IRQ7_VECTOR] = 7, + [IRQ8_VECTOR] = 8, + [IRQ9_VECTOR] = 9, + [IRQ10_VECTOR] = 10, + [IRQ11_VECTOR] = 11, + [IRQ12_VECTOR] = 12, + [IRQ13_VECTOR] = 13, + [IRQ14_VECTOR] = 14, + [IRQ15_VECTOR] = 15, + [IRQ15_VECTOR + 1 ... NR_VECTORS - 1] = -1 +}; + +int vector_used_by_percpu_irq(unsigned int vector) +{ + int cpu; + + for_each_online_cpu(cpu) { + if (per_cpu(vector_irq, cpu)[vector] != -1) + return 1; + } + + return 0; +} + +static void __init init_ISA_irqs(void) +{ + int i; + +#if defined(CONFIG_X86_64) || defined(CONFIG_X86_LOCAL_APIC) + init_bsp_APIC(); +#endif + init_8259A(0); + + /* + * 16 old-style INTA-cycle interrupts: + */ + for (i = 0; i < NR_IRQS_LEGACY; i++) { + struct irq_desc *desc = irq_to_desc(i); + + desc->status = IRQ_DISABLED; + desc->action = NULL; + desc->depth = 1; + + set_irq_chip_and_handler_name(i, &i8259A_chip, + handle_level_irq, "XT"); + } +} + +/* Overridden in paravirt.c */ +void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ"))); + +static void __init smp_intr_init(void) +{ +#ifdef CONFIG_SMP +#if defined(CONFIG_X86_64) || defined(CONFIG_X86_LOCAL_APIC) + /* + * The reschedule interrupt is a CPU-to-CPU reschedule-helper + * IPI, driven by wakeup. + */ + alloc_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt); + + /* IPIs for invalidation */ + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+0, invalidate_interrupt0); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+1, invalidate_interrupt1); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+2, invalidate_interrupt2); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+3, invalidate_interrupt3); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+4, invalidate_interrupt4); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+5, invalidate_interrupt5); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+6, invalidate_interrupt6); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+7, invalidate_interrupt7); + + /* IPI for generic function call */ + alloc_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt); + + /* IPI for generic single function call */ + alloc_intr_gate(CALL_FUNCTION_SINGLE_VECTOR, + call_function_single_interrupt); + + /* Low priority IPI to cleanup after moving an irq */ + set_intr_gate(IRQ_MOVE_CLEANUP_VECTOR, irq_move_cleanup_interrupt); + set_bit(IRQ_MOVE_CLEANUP_VECTOR, used_vectors); +#endif +#endif /* CONFIG_SMP */ +} + +static void __init apic_intr_init(void) +{ + smp_intr_init(); + +#ifdef CONFIG_X86_64 + alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt); + alloc_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt); +#endif + +#if defined(CONFIG_X86_64) || defined(CONFIG_X86_LOCAL_APIC) + /* self generated IPI for local APIC timer */ + alloc_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt); + + /* generic IPI for platform specific use */ + alloc_intr_gate(GENERIC_INTERRUPT_VECTOR, generic_interrupt); + + /* IPI vectors for APIC spurious and error interrupts */ + alloc_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt); + alloc_intr_gate(ERROR_APIC_VECTOR, error_interrupt); +#endif + +#ifdef CONFIG_X86_32 +#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86_MCE_P4THERMAL) + /* thermal monitor LVT interrupt */ + alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt); +#endif +#endif +} + +#ifdef CONFIG_X86_32 +/** + * x86_quirk_pre_intr_init - initialisation prior to setting up interrupt vectors + * + * Description: + * Perform any necessary interrupt initialisation prior to setting up + * the "ordinary" interrupt call gates. For legacy reasons, the ISA + * interrupts should be initialised here if the machine emulates a PC + * in any way. + **/ +static void __init x86_quirk_pre_intr_init(void) +{ + if (x86_quirks->arch_pre_intr_init) { + if (x86_quirks->arch_pre_intr_init()) + return; + } + init_ISA_irqs(); +} +#endif + +void __init native_init_IRQ(void) +{ + int i; + +#ifdef CONFIG_X86_32 + /* Execute any quirks before the call gates are initialised: */ + x86_quirk_pre_intr_init(); +#else + init_ISA_irqs(); +#endif + + /* + * Cover the whole vector space, no vector can escape + * us. (some of these will be overridden and become + * 'special' SMP interrupts) + */ + for (i = FIRST_EXTERNAL_VECTOR; i < NR_VECTORS; i++) { +#ifdef CONFIG_X86_32 + /* SYSCALL_VECTOR was reserved in trap_init. */ + if (i != SYSCALL_VECTOR) + set_intr_gate(i, interrupt[i-FIRST_EXTERNAL_VECTOR]); +#else + /* IA32_SYSCALL_VECTOR was reserved in trap_init. */ + if (i != IA32_SYSCALL_VECTOR) + set_intr_gate(i, interrupt[i-FIRST_EXTERNAL_VECTOR]); +#endif + } + + apic_intr_init(); + + if (!acpi_ioapic) + setup_irq(2, &irq2); + +#ifdef CONFIG_X86_32 + /* + * Call quirks after call gates are initialised (usually add in + * the architecture specific gates): + */ + x86_quirk_intr_init(); + + /* + * External FPU? Set up irq13 if so, for + * original braindamaged IBM FERR coupling. + */ + if (boot_cpu_data.hard_math && !cpu_has_fpu) + setup_irq(FPU_IRQ, &fpu_irq); + + irq_ctx_init(smp_processor_id()); +#endif +} -- cgit v1.2.3 From ac3048dfd4740becf8d768844cf47ebee363c9f8 Mon Sep 17 00:00:00 2001 From: Pekka Enberg Date: Thu, 9 Apr 2009 11:52:29 +0300 Subject: x86: define IA32_SYSCALL_VECTOR on 32-bit to reduce ifdefs Impact: cleanup We can remove some #ifdefs if we define IA32_SYSCALL_VECTOR on 32-bit. Reviewed-by Cyrill Gorcunov Signed-off-by: Pekka Enberg Signed-off-by: Ingo Molnar --- arch/x86/kernel/irqinit.c | 6 ------ 1 file changed, 6 deletions(-) (limited to 'arch/x86/kernel/irqinit.c') diff --git a/arch/x86/kernel/irqinit.c b/arch/x86/kernel/irqinit.c index f3be5e97427..f2c60a59f47 100644 --- a/arch/x86/kernel/irqinit.c +++ b/arch/x86/kernel/irqinit.c @@ -242,15 +242,9 @@ void __init native_init_IRQ(void) * 'special' SMP interrupts) */ for (i = FIRST_EXTERNAL_VECTOR; i < NR_VECTORS; i++) { -#ifdef CONFIG_X86_32 - /* SYSCALL_VECTOR was reserved in trap_init. */ - if (i != SYSCALL_VECTOR) - set_intr_gate(i, interrupt[i-FIRST_EXTERNAL_VECTOR]); -#else /* IA32_SYSCALL_VECTOR was reserved in trap_init. */ if (i != IA32_SYSCALL_VECTOR) set_intr_gate(i, interrupt[i-FIRST_EXTERNAL_VECTOR]); -#endif } apic_intr_init(); -- cgit v1.2.3 From abdb5a5713330e17dfe91ab0d3e29c4744d95162 Mon Sep 17 00:00:00 2001 From: Pekka Enberg Date: Thu, 9 Apr 2009 11:52:30 +0300 Subject: x86: remove some ifdefs from native_init_IRQ() Impact: cleanup Reviewed-by Cyrill Gorcunov Signed-off-by: Pekka Enberg Signed-off-by: Ingo Molnar --- arch/x86/kernel/irqinit.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) (limited to 'arch/x86/kernel/irqinit.c') diff --git a/arch/x86/kernel/irqinit.c b/arch/x86/kernel/irqinit.c index f2c60a59f47..626977200a5 100644 --- a/arch/x86/kernel/irqinit.c +++ b/arch/x86/kernel/irqinit.c @@ -205,7 +205,6 @@ static void __init apic_intr_init(void) #endif } -#ifdef CONFIG_X86_32 /** * x86_quirk_pre_intr_init - initialisation prior to setting up interrupt vectors * @@ -217,24 +216,21 @@ static void __init apic_intr_init(void) **/ static void __init x86_quirk_pre_intr_init(void) { +#ifdef CONFIG_X86_32 if (x86_quirks->arch_pre_intr_init) { if (x86_quirks->arch_pre_intr_init()) return; } +#endif init_ISA_irqs(); } -#endif void __init native_init_IRQ(void) { int i; -#ifdef CONFIG_X86_32 /* Execute any quirks before the call gates are initialised: */ x86_quirk_pre_intr_init(); -#else - init_ISA_irqs(); -#endif /* * Cover the whole vector space, no vector can escape -- cgit v1.2.3 From 47f16ca7631f9c6bad8e6d968cfb1433029b09ec Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Fri, 10 Apr 2009 14:58:05 +0200 Subject: x86, irqinit: preempt merge conflicts To make the topic merge life easier for tip:perfcounters/core, include two (inactive in this topic) IRQ vector initializations here. Also fix build bug - missing kprobes.h inclusion. Signed-off-by: Ingo Molnar --- arch/x86/kernel/irqinit.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch/x86/kernel/irqinit.c') diff --git a/arch/x86/kernel/irqinit.c b/arch/x86/kernel/irqinit.c index 626977200a5..b424c32c4a0 100644 --- a/arch/x86/kernel/irqinit.c +++ b/arch/x86/kernel/irqinit.c @@ -7,6 +7,7 @@ #include #include #include +#include #include #include #include @@ -195,6 +196,13 @@ static void __init apic_intr_init(void) /* IPI vectors for APIC spurious and error interrupts */ alloc_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt); alloc_intr_gate(ERROR_APIC_VECTOR, error_interrupt); + + /* Performance monitoring interrupts: */ +# ifdef CONFIG_PERF_COUNTERS + alloc_intr_gate(LOCAL_PERF_VECTOR, perf_counter_interrupt); + alloc_intr_gate(LOCAL_PENDING_VECTOR, perf_pending_interrupt); +# endif + #endif #ifdef CONFIG_X86_32 -- cgit v1.2.3 From 77857dc07247ed5fa700a197c96ef842d8dbebdf Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Wed, 15 Apr 2009 11:57:01 -0700 Subject: x86: use used_vectors in init_IRQ() Impact: fix crash with many devices I found this crash: [ 552.616646] general protection fault: 0403 [#1] SMP [ 552.620013] last sysfs file: /sys/devices/pci0000:00/0000:00:02.0/usb1/1-1/1-1:1.0/host13/target13:0:0/13:0:0:0/block/sr0/size [ 552.620013] CPU 0 [ 552.620013] Modules linked in: [ 552.620013] Pid: 0, comm: swapper Not tainted 2.6.30-rc1-tip-01931-g8fcafd8-dirty #28 Sun Fire X4440 [ 552.620013] RIP: 0010:[] [] default_idle+0x7d/0xda [ 552.620013] RSP: 0018:ffffffff81345e68 EFLAGS: 00010246 [ 552.620013] RAX: 0000000000000000 RBX: ffffffff8133d870 RCX: ffffc20000000000 [ 552.620013] RDX: 00000000001d0620 RSI: ffffffff8023bad8 RDI: ffffffff802a3169 [ 552.620013] RBP: ffffffff81345e98 R08: 0000000000000000 R09: ffffffff812244a0 [ 552.620013] R10: ffffffff81345dc8 R11: 7ebe1b6fa0bcac50 R12: 4ec4ec4ec4ec4ec5 [ 552.620013] R13: ffffffff813a54d0 R14: ffffffff813a7a40 R15: 0000000000000000 [ 552.620013] FS: 00000000006d1880(0000) GS:ffffc20000000000(0000) knlGS:0000000000000000 [ 552.620013] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b [ 552.620013] CR2: 00007fec9d936a50 CR3: 000000007d1a9000 CR4: 00000000000006e0 [ 552.620013] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 552.620013] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 552.620013] Process swapper (pid: 0, threadinfo ffffffff81344000,task ffffffff812244a0) [ 552.620013] Stack: [ 552.620013] 0000000000000000 ffffc20000000000 00000000001d0620 7ebe1b6fa0bcac50 [ 552.620013] ffffffff8133d870 4ec4ec4ec4ec4ec5 ffffffff81345ec8 ffffffff8023bd84 [ 552.620013] 4ec4ec4ec4ec4ec5 ffffffff813a54d0 7ebe1b6fa0bcac50 ffffffff8133d870 [ 552.620013] Call Trace: [ 552.620013] [] c1e_idle+0x109/0x124 [ 552.620013] [] cpu_idle+0xb8/0x101 [ 552.620013] [] rest_init+0x7e/0x94 [ 552.620013] [] start_kernel+0x3dc/0x3fd [ 552.620013] [] x86_64_start_reservations+0xb9/0xd4 [ 552.620013] [] x86_64_start_kernel+0xee/0x109 [ 552.620013] Code: 48 8b 04 25 f8 b4 00 00 83 a0 3c e0 ff ff fb 0f ae f0 65 48 8b 04 25 f8 b4 00 00 f6 80 38 e0 ff ff 08 75 09 e8 71 76 06 00 fb f4 06 e8 68 76 06 00 fb 65 48 8b 04 25 f8 b4 00 00 83 88 3c e0 [ 552.620013] RIP [] default_idle+0x7d/0xda [ 552.620013] RSP [ 552.828646] ---[ end trace 4cbfc5c01382af7f ]--- Joerg Roedel said "The 0403 error code means that there was an external interrupt with vector 0x80. Yinghai, my theory is that the kernel on this machine has no 32bit emulation compiled in, right? In this case the selector points to a zero entry which may cause the #gpf right after the hlt. But I have no idea where the external int 0x80 comes from" it turns out that we could use 0x80 for external device on 64-bit when 32-bit emulation is disabled. But we forgot to set the gate for it. try to set gate for it by checking used_vectors. Also move apic_intr_init() early to avoid setting that gate two times. Signed-off-by: Yinghai Lu Cc: Andrew Morton Cc: Joerg Roedel LKML-Reference: <49E62DFD.6010904@kernel.org> Signed-off-by: Ingo Molnar --- arch/x86/kernel/irqinit.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch/x86/kernel/irqinit.c') diff --git a/arch/x86/kernel/irqinit.c b/arch/x86/kernel/irqinit.c index b424c32c4a0..2e08b10ad51 100644 --- a/arch/x86/kernel/irqinit.c +++ b/arch/x86/kernel/irqinit.c @@ -240,19 +240,19 @@ void __init native_init_IRQ(void) /* Execute any quirks before the call gates are initialised: */ x86_quirk_pre_intr_init(); + apic_intr_init(); + /* * Cover the whole vector space, no vector can escape * us. (some of these will be overridden and become * 'special' SMP interrupts) */ for (i = FIRST_EXTERNAL_VECTOR; i < NR_VECTORS; i++) { - /* IA32_SYSCALL_VECTOR was reserved in trap_init. */ - if (i != IA32_SYSCALL_VECTOR) + /* IA32_SYSCALL_VECTOR could be used in trap_init already. */ + if (!test_bit(i, used_vectors)) set_intr_gate(i, interrupt[i-FIRST_EXTERNAL_VECTOR]); } - apic_intr_init(); - if (!acpi_ioapic) setup_irq(2, &irq2); -- cgit v1.2.3