From 849620fab413355eff48232eac5a8c53c57615c5 Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Thu, 14 May 2009 17:10:52 +0200
Subject: Revert "oprofile: discover counters for op ppro too"

This reverts commit 59512900baab03c5629f2ff5efad1d5d4e682ece.

arch_perfmon_setup_counters() is actually never called for ppro, so
there is no code that changes the numbers in op_ppro_spec. The patch
as it is has no effect.

Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/op_model_ppro.c | 8 +++-----
 arch/x86/oprofile/op_x86_model.h  | 2 +-
 2 files changed, 4 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/op_model_ppro.c b/arch/x86/oprofile/op_model_ppro.c
index 10131fbdaad..2a123990a84 100644
--- a/arch/x86/oprofile/op_model_ppro.c
+++ b/arch/x86/oprofile/op_model_ppro.c
@@ -213,9 +213,9 @@ static void ppro_shutdown(struct op_msrs const * const msrs)
 }
 
 
-struct op_x86_model_spec op_ppro_spec = {
-	.num_counters		= 2,	/* can be overriden */
-	.num_controls		= 2,	/* dito */
+struct op_x86_model_spec const op_ppro_spec = {
+	.num_counters		= 2,
+	.num_controls		= 2,
 	.fill_in_addresses	= &ppro_fill_in_addresses,
 	.setup_ctrs		= &ppro_setup_ctrs,
 	.check_ctrs		= &ppro_check_ctrs,
@@ -251,8 +251,6 @@ void arch_perfmon_setup_counters(void)
 
 	op_arch_perfmon_spec.num_counters = num_counters;
 	op_arch_perfmon_spec.num_controls = num_counters;
-	op_ppro_spec.num_counters = num_counters;
-	op_ppro_spec.num_controls = num_counters;
 }
 
 struct op_x86_model_spec op_arch_perfmon_spec = {
diff --git a/arch/x86/oprofile/op_x86_model.h b/arch/x86/oprofile/op_x86_model.h
index 825e79064d6..2317149c94f 100644
--- a/arch/x86/oprofile/op_x86_model.h
+++ b/arch/x86/oprofile/op_x86_model.h
@@ -45,7 +45,7 @@ struct op_x86_model_spec {
 	void (*shutdown)(struct op_msrs const * const msrs);
 };
 
-extern struct op_x86_model_spec op_ppro_spec;
+extern struct op_x86_model_spec const op_ppro_spec;
 extern struct op_x86_model_spec const op_p4_spec;
 extern struct op_x86_model_spec const op_p4_ht2_spec;
 extern struct op_x86_model_spec const op_amd_spec;
-- 
cgit v1.2.3


From e419294ed3c98cccc145202e4fe165bfd8099d63 Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Sun, 12 Oct 2008 15:12:34 -0400
Subject: x86/oprofile: moving arch_perfmon counter setup to
 op_x86_model_spec.init

The function arch_perfmon_init() in nmi_int.c is model specific. This
patch moves it to op_model_ppro.c by using the init function pointer
in struct op_x86_model_spec.

Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/nmi_int.c       | 21 +++++++++------------
 arch/x86/oprofile/op_model_ppro.c |  9 ++++++++-
 arch/x86/oprofile/op_x86_model.h  |  2 --
 3 files changed, 17 insertions(+), 15 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index 3b285e656e2..dd8515301fb 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -427,7 +427,7 @@ static int __init ppro_init(char **cpu_type)
 		*cpu_type = "i386/core_2";
 		break;
 	case 26:
-		arch_perfmon_setup_counters();
+		model = &op_arch_perfmon_spec;
 		*cpu_type = "i386/core_i7";
 		break;
 	case 28:
@@ -442,16 +442,6 @@ static int __init ppro_init(char **cpu_type)
 	return 1;
 }
 
-static int __init arch_perfmon_init(char **cpu_type)
-{
-	if (!cpu_has_arch_perfmon)
-		return 0;
-	*cpu_type = "i386/arch_perfmon";
-	model = &op_arch_perfmon_spec;
-	arch_perfmon_setup_counters();
-	return 1;
-}
-
 /* in order to get sysfs right */
 static int using_nmi;
 
@@ -509,8 +499,15 @@ int __init op_nmi_init(struct oprofile_operations *ops)
 			break;
 		}
 
-		if (!cpu_type && !arch_perfmon_init(&cpu_type))
+		if (cpu_type)
+			break;
+
+		if (!cpu_has_arch_perfmon)
 			return -ENODEV;
+
+		/* use arch perfmon as fallback */
+		cpu_type = "i386/arch_perfmon";
+		model = &op_arch_perfmon_spec;
 		break;
 
 	default:
diff --git a/arch/x86/oprofile/op_model_ppro.c b/arch/x86/oprofile/op_model_ppro.c
index 2a123990a84..ae581196688 100644
--- a/arch/x86/oprofile/op_model_ppro.c
+++ b/arch/x86/oprofile/op_model_ppro.c
@@ -233,7 +233,7 @@ struct op_x86_model_spec const op_ppro_spec = {
  * the specific CPU.
  */
 
-void arch_perfmon_setup_counters(void)
+static void arch_perfmon_setup_counters(void)
 {
 	union cpuid10_eax eax;
 
@@ -253,7 +253,14 @@ void arch_perfmon_setup_counters(void)
 	op_arch_perfmon_spec.num_controls = num_counters;
 }
 
+static int arch_perfmon_init(struct oprofile_operations *ignore)
+{
+	arch_perfmon_setup_counters();
+	return 0;
+}
+
 struct op_x86_model_spec op_arch_perfmon_spec = {
+	.init			= &arch_perfmon_init,
 	/* num_counters/num_controls filled in at runtime */
 	.fill_in_addresses	= &ppro_fill_in_addresses,
 	/* user space does the cpuid check for available events */
diff --git a/arch/x86/oprofile/op_x86_model.h b/arch/x86/oprofile/op_x86_model.h
index 2317149c94f..ed27783bb0d 100644
--- a/arch/x86/oprofile/op_x86_model.h
+++ b/arch/x86/oprofile/op_x86_model.h
@@ -51,6 +51,4 @@ extern struct op_x86_model_spec const op_p4_ht2_spec;
 extern struct op_x86_model_spec const op_amd_spec;
 extern struct op_x86_model_spec op_arch_perfmon_spec;
 
-extern void arch_perfmon_setup_counters(void);
-
 #endif /* OP_X86_MODEL_H */
-- 
cgit v1.2.3


From 06552ccc36abeb12e37efc16c384dc7f30794f85 Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Thu, 28 May 2009 02:12:36 +0200
Subject: x86/oprofile: minor style changes in struct op_x86_model_spec

Some vertical alignments. Variables are now located in the beginning
of the struct.

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/op_x86_model.h | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/op_x86_model.h b/arch/x86/oprofile/op_x86_model.h
index ed27783bb0d..bd8157d12ff 100644
--- a/arch/x86/oprofile/op_x86_model.h
+++ b/arch/x86/oprofile/op_x86_model.h
@@ -32,17 +32,17 @@ struct pt_regs;
  * various x86 CPU models' perfctr support.
  */
 struct op_x86_model_spec {
-	int (*init)(struct oprofile_operations *ops);
-	void (*exit)(void);
-	unsigned int num_counters;
-	unsigned int num_controls;
-	void (*fill_in_addresses)(struct op_msrs * const msrs);
-	void (*setup_ctrs)(struct op_msrs const * const msrs);
-	int (*check_ctrs)(struct pt_regs * const regs,
-		struct op_msrs const * const msrs);
-	void (*start)(struct op_msrs const * const msrs);
-	void (*stop)(struct op_msrs const * const msrs);
-	void (*shutdown)(struct op_msrs const * const msrs);
+	unsigned int	num_counters;
+	unsigned int	num_controls;
+	int		(*init)(struct oprofile_operations *ops);
+	void		(*exit)(void);
+	void		(*fill_in_addresses)(struct op_msrs * const msrs);
+	void		(*setup_ctrs)(struct op_msrs const * const msrs);
+	int		(*check_ctrs)(struct pt_regs * const regs,
+				      struct op_msrs const * const msrs);
+	void		(*start)(struct op_msrs const * const msrs);
+	void		(*stop)(struct op_msrs const * const msrs);
+	void		(*shutdown)(struct op_msrs const * const msrs);
 };
 
 extern struct op_x86_model_spec const op_ppro_spec;
-- 
cgit v1.2.3


From 9063759540daac40cc1f402f83a3be6b489f8583 Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Tue, 10 Mar 2009 19:15:57 +0100
Subject: x86/oprofile: remove #ifdefs in ibs functions

IBS code is moved to separate functions. This allows the removal
of #ifdefs in functions.

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/op_model_amd.c | 80 +++++++++++++++++++++++-----------------
 1 file changed, 46 insertions(+), 34 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/op_model_amd.c b/arch/x86/oprofile/op_model_amd.c
index 8fdf06e4edf..b54c0880b7d 100644
--- a/arch/x86/oprofile/op_model_amd.c
+++ b/arch/x86/oprofile/op_model_amd.c
@@ -220,6 +220,50 @@ op_amd_handle_ibs(struct pt_regs * const regs,
 	return 1;
 }
 
+static inline void op_amd_start_ibs(void)
+{
+	unsigned int low, high;
+	if (has_ibs && ibs_config.fetch_enabled) {
+		low = (ibs_config.max_cnt_fetch >> 4) & 0xFFFF;
+		high = ((ibs_config.rand_en & 0x1) << 25) /* bit 57 */
+			+ IBS_FETCH_HIGH_ENABLE;
+		wrmsr(MSR_AMD64_IBSFETCHCTL, low, high);
+	}
+
+	if (has_ibs && ibs_config.op_enabled) {
+		low = ((ibs_config.max_cnt_op >> 4) & 0xFFFF)
+			+ ((ibs_config.dispatched_ops & 0x1) << 19) /* bit 19 */
+			+ IBS_OP_LOW_ENABLE;
+		high = 0;
+		wrmsr(MSR_AMD64_IBSOPCTL, low, high);
+	}
+}
+
+static void op_amd_stop_ibs(void)
+{
+	unsigned int low, high;
+	if (has_ibs && ibs_config.fetch_enabled) {
+		/* clear max count and enable */
+		low = 0;
+		high = 0;
+		wrmsr(MSR_AMD64_IBSFETCHCTL, low, high);
+	}
+
+	if (has_ibs && ibs_config.op_enabled) {
+		/* clear max count and enable */
+		low = 0;
+		high = 0;
+		wrmsr(MSR_AMD64_IBSOPCTL, low, high);
+	}
+}
+
+#else
+
+static inline int op_amd_handle_ibs(struct pt_regs * const regs,
+				    struct op_msrs const * const msrs) { }
+static inline void op_amd_start_ibs(void) { }
+static inline void op_amd_stop_ibs(void) { }
+
 #endif
 
 static int op_amd_check_ctrs(struct pt_regs * const regs,
@@ -238,9 +282,7 @@ static int op_amd_check_ctrs(struct pt_regs * const regs,
 		}
 	}
 
-#ifdef CONFIG_OPROFILE_IBS
 	op_amd_handle_ibs(regs, msrs);
-#endif
 
 	/* See op_model_ppro.c */
 	return 1;
@@ -258,25 +300,9 @@ static void op_amd_start(struct op_msrs const * const msrs)
 		}
 	}
 
-#ifdef CONFIG_OPROFILE_IBS
-	if (has_ibs && ibs_config.fetch_enabled) {
-		low = (ibs_config.max_cnt_fetch >> 4) & 0xFFFF;
-		high = ((ibs_config.rand_en & 0x1) << 25) /* bit 57 */
-			+ IBS_FETCH_HIGH_ENABLE;
-		wrmsr(MSR_AMD64_IBSFETCHCTL, low, high);
-	}
-
-	if (has_ibs && ibs_config.op_enabled) {
-		low = ((ibs_config.max_cnt_op >> 4) & 0xFFFF)
-			+ ((ibs_config.dispatched_ops & 0x1) << 19) /* bit 19 */
-			+ IBS_OP_LOW_ENABLE;
-		high = 0;
-		wrmsr(MSR_AMD64_IBSOPCTL, low, high);
-	}
-#endif
+	op_amd_start_ibs();
 }
 
-
 static void op_amd_stop(struct op_msrs const * const msrs)
 {
 	unsigned int low, high;
@@ -294,21 +320,7 @@ static void op_amd_stop(struct op_msrs const * const msrs)
 		CTRL_WRITE(low, high, msrs, i);
 	}
 
-#ifdef CONFIG_OPROFILE_IBS
-	if (has_ibs && ibs_config.fetch_enabled) {
-		/* clear max count and enable */
-		low = 0;
-		high = 0;
-		wrmsr(MSR_AMD64_IBSFETCHCTL, low, high);
-	}
-
-	if (has_ibs && ibs_config.op_enabled) {
-		/* clear max count and enable */
-		low = 0;
-		high = 0;
-		wrmsr(MSR_AMD64_IBSOPCTL, low, high);
-	}
-#endif
+	op_amd_stop_ibs();
 }
 
 static void op_amd_shutdown(struct op_msrs const * const msrs)
-- 
cgit v1.2.3


From d20f24c66011f8a397bca6c5d1a6a7c7e612d2d7 Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Sun, 11 Jan 2009 13:01:16 +0100
Subject: x86/oprofile: simplify AMD cpu init code

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/nmi_int.c | 15 +++++++--------
 1 file changed, 7 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index dd8515301fb..ae0ab03959b 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -460,27 +460,26 @@ int __init op_nmi_init(struct oprofile_operations *ops)
 		/* Needs to be at least an Athlon (or hammer in 32bit mode) */
 
 		switch (family) {
-		default:
-			return -ENODEV;
 		case 6:
-			model = &op_amd_spec;
 			cpu_type = "i386/athlon";
 			break;
 		case 0xf:
-			model = &op_amd_spec;
-			/* Actually it could be i386/hammer too, but give
-			 user space an consistent name. */
+			/*
+			 * Actually it could be i386/hammer too, but
+			 * give user space an consistent name.
+			 */
 			cpu_type = "x86-64/hammer";
 			break;
 		case 0x10:
-			model = &op_amd_spec;
 			cpu_type = "x86-64/family10";
 			break;
 		case 0x11:
-			model = &op_amd_spec;
 			cpu_type = "x86-64/family11h";
 			break;
+		default:
+			return -ENODEV;
 		}
+		model = &op_amd_spec;
 		break;
 
 	case X86_VENDOR_INTEL:
-- 
cgit v1.2.3


From ff9faa8b676e195476b86f03fe58db0f01bda8f3 Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Fri, 22 May 2009 15:36:29 +0200
Subject: x86/oprofile: move common macros to op_x86_model.h

There are duplicate macro implementations in model specific code. This
patch moves all common macros to op_x86_model.h.

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/op_model_amd.c  | 8 --------
 arch/x86/oprofile/op_model_p4.c   | 2 --
 arch/x86/oprofile/op_model_ppro.c | 8 --------
 arch/x86/oprofile/op_x86_model.h  | 9 +++++++++
 4 files changed, 9 insertions(+), 18 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/op_model_amd.c b/arch/x86/oprofile/op_model_amd.c
index b54c0880b7d..4b9254a67e6 100644
--- a/arch/x86/oprofile/op_model_amd.c
+++ b/arch/x86/oprofile/op_model_amd.c
@@ -26,22 +26,14 @@
 #define NUM_COUNTERS 4
 #define NUM_CONTROLS 4
 
-#define CTR_IS_RESERVED(msrs, c) (msrs->counters[(c)].addr ? 1 : 0)
 #define CTR_READ(l, h, msrs, c) do {rdmsr(msrs->counters[(c)].addr, (l), (h)); } while (0)
 #define CTR_WRITE(l, msrs, c) do {wrmsr(msrs->counters[(c)].addr, -(unsigned int)(l), -1); } while (0)
 #define CTR_OVERFLOWED(n) (!((n) & (1U<<31)))
 
-#define CTRL_IS_RESERVED(msrs, c) (msrs->controls[(c)].addr ? 1 : 0)
 #define CTRL_READ(l, h, msrs, c) do {rdmsr(msrs->controls[(c)].addr, (l), (h)); } while (0)
 #define CTRL_WRITE(l, h, msrs, c) do {wrmsr(msrs->controls[(c)].addr, (l), (h)); } while (0)
-#define CTRL_SET_ACTIVE(n) (n |= (1<<22))
-#define CTRL_SET_INACTIVE(n) (n &= ~(1<<22))
 #define CTRL_CLEAR_LO(x) (x &= (1<<21))
 #define CTRL_CLEAR_HI(x) (x &= 0xfffffcf0)
-#define CTRL_SET_ENABLE(val) (val |= 1<<20)
-#define CTRL_SET_USR(val, u) (val |= ((u & 1) << 16))
-#define CTRL_SET_KERN(val, k) (val |= ((k & 1) << 17))
-#define CTRL_SET_UM(val, m) (val |= (m << 8))
 #define CTRL_SET_EVENT_LOW(val, e) (val |= (e & 0xff))
 #define CTRL_SET_EVENT_HIGH(val, e) (val |= ((e >> 8) & 0xf))
 #define CTRL_SET_HOST_ONLY(val, h) (val |= ((h & 1) << 9))
diff --git a/arch/x86/oprofile/op_model_p4.c b/arch/x86/oprofile/op_model_p4.c
index 819b131fd75..420c15e7123 100644
--- a/arch/x86/oprofile/op_model_p4.c
+++ b/arch/x86/oprofile/op_model_p4.c
@@ -366,8 +366,6 @@ static struct p4_event_binding p4_events[NUM_EVENTS] = {
 #define CCCR_OVF_P(cccr) ((cccr) & (1U<<31))
 #define CCCR_CLEAR_OVF(cccr) ((cccr) &= (~(1U<<31)))
 
-#define CTRL_IS_RESERVED(msrs, c) (msrs->controls[(c)].addr ? 1 : 0)
-#define CTR_IS_RESERVED(msrs, c) (msrs->counters[(c)].addr ? 1 : 0)
 #define CTR_READ(l, h, i) do {rdmsr(p4_counters[(i)].counter_address, (l), (h)); } while (0)
 #define CTR_WRITE(l, i) do {wrmsr(p4_counters[(i)].counter_address, -(u32)(l), -1); } while (0)
 #define CTR_OVERFLOW_P(ctr) (!((ctr) & 0x80000000))
diff --git a/arch/x86/oprofile/op_model_ppro.c b/arch/x86/oprofile/op_model_ppro.c
index ae581196688..a922a1a815c 100644
--- a/arch/x86/oprofile/op_model_ppro.c
+++ b/arch/x86/oprofile/op_model_ppro.c
@@ -26,19 +26,11 @@
 static int num_counters = 2;
 static int counter_width = 32;
 
-#define CTR_IS_RESERVED(msrs, c) (msrs->counters[(c)].addr ? 1 : 0)
 #define CTR_OVERFLOWED(n) (!((n) & (1ULL<<(counter_width-1))))
 
-#define CTRL_IS_RESERVED(msrs, c) (msrs->controls[(c)].addr ? 1 : 0)
 #define CTRL_READ(l, h, msrs, c) do {rdmsr((msrs->controls[(c)].addr), (l), (h)); } while (0)
 #define CTRL_WRITE(l, h, msrs, c) do {wrmsr((msrs->controls[(c)].addr), (l), (h)); } while (0)
-#define CTRL_SET_ACTIVE(n) (n |= (1<<22))
-#define CTRL_SET_INACTIVE(n) (n &= ~(1<<22))
 #define CTRL_CLEAR(x) (x &= (1<<21))
-#define CTRL_SET_ENABLE(val) (val |= 1<<20)
-#define CTRL_SET_USR(val, u) (val |= ((u & 1) << 16))
-#define CTRL_SET_KERN(val, k) (val |= ((k & 1) << 17))
-#define CTRL_SET_UM(val, m) (val |= (m << 8))
 #define CTRL_SET_EVENT(val, e) (val |= e)
 
 static u64 *reset_value;
diff --git a/arch/x86/oprofile/op_x86_model.h b/arch/x86/oprofile/op_x86_model.h
index bd8157d12ff..c80ec7d0999 100644
--- a/arch/x86/oprofile/op_x86_model.h
+++ b/arch/x86/oprofile/op_x86_model.h
@@ -11,6 +11,15 @@
 #ifndef OP_X86_MODEL_H
 #define OP_X86_MODEL_H
 
+#define CTR_IS_RESERVED(msrs, c) (msrs->counters[(c)].addr ? 1 : 0)
+#define CTRL_IS_RESERVED(msrs, c) (msrs->controls[(c)].addr ? 1 : 0)
+#define CTRL_SET_ACTIVE(n) (n |= (1<<22))
+#define CTRL_SET_ENABLE(val) (val |= 1<<20)
+#define CTRL_SET_INACTIVE(n) (n &= ~(1<<22))
+#define CTRL_SET_KERN(val, k) (val |= ((k & 1) << 17))
+#define CTRL_SET_UM(val, m) (val |= (m << 8))
+#define CTRL_SET_USR(val, u) (val |= ((u & 1) << 16))
+
 struct op_saved_msr {
 	unsigned int high;
 	unsigned int low;
-- 
cgit v1.2.3


From d2731a4387ad6c6bca07abfe9ed41d450fb6d665 Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Fri, 22 May 2009 19:47:38 +0200
Subject: x86/oprofile: remove MSR macros for AMD cpus

The macros CTRL_READ() and CTRL_WRITE() make the code hard to read and
maintain. This patch replaces them by rdmsr()/wrmsr() functions and
simplifies the code.

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/op_model_amd.c | 29 ++++++++++++-----------------
 1 file changed, 12 insertions(+), 17 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/op_model_amd.c b/arch/x86/oprofile/op_model_amd.c
index 4b9254a67e6..c6181c265ae 100644
--- a/arch/x86/oprofile/op_model_amd.c
+++ b/arch/x86/oprofile/op_model_amd.c
@@ -26,12 +26,7 @@
 #define NUM_COUNTERS 4
 #define NUM_CONTROLS 4
 
-#define CTR_READ(l, h, msrs, c) do {rdmsr(msrs->counters[(c)].addr, (l), (h)); } while (0)
-#define CTR_WRITE(l, msrs, c) do {wrmsr(msrs->counters[(c)].addr, -(unsigned int)(l), -1); } while (0)
 #define CTR_OVERFLOWED(n) (!((n) & (1U<<31)))
-
-#define CTRL_READ(l, h, msrs, c) do {rdmsr(msrs->controls[(c)].addr, (l), (h)); } while (0)
-#define CTRL_WRITE(l, h, msrs, c) do {wrmsr(msrs->controls[(c)].addr, (l), (h)); } while (0)
 #define CTRL_CLEAR_LO(x) (x &= (1<<21))
 #define CTRL_CLEAR_HI(x) (x &= 0xfffffcf0)
 #define CTRL_SET_EVENT_LOW(val, e) (val |= (e & 0xff))
@@ -101,17 +96,17 @@ static void op_amd_setup_ctrs(struct op_msrs const * const msrs)
 	for (i = 0 ; i < NUM_CONTROLS; ++i) {
 		if (unlikely(!CTRL_IS_RESERVED(msrs, i)))
 			continue;
-		CTRL_READ(low, high, msrs, i);
+		rdmsr(msrs->controls[i].addr, low, high);
 		CTRL_CLEAR_LO(low);
 		CTRL_CLEAR_HI(high);
-		CTRL_WRITE(low, high, msrs, i);
+		wrmsr(msrs->controls[i].addr, low, high);
 	}
 
 	/* avoid a false detection of ctr overflows in NMI handler */
 	for (i = 0; i < NUM_COUNTERS; ++i) {
 		if (unlikely(!CTR_IS_RESERVED(msrs, i)))
 			continue;
-		CTR_WRITE(1, msrs, i);
+		wrmsr(msrs->counters[i].addr, -1, -1);
 	}
 
 	/* enable active counters */
@@ -119,9 +114,9 @@ static void op_amd_setup_ctrs(struct op_msrs const * const msrs)
 		if ((counter_config[i].enabled) && (CTR_IS_RESERVED(msrs, i))) {
 			reset_value[i] = counter_config[i].count;
 
-			CTR_WRITE(counter_config[i].count, msrs, i);
+			wrmsr(msrs->counters[i].addr, -(unsigned int)counter_config[i].count, -1);
 
-			CTRL_READ(low, high, msrs, i);
+			rdmsr(msrs->controls[i].addr, low, high);
 			CTRL_CLEAR_LO(low);
 			CTRL_CLEAR_HI(high);
 			CTRL_SET_ENABLE(low);
@@ -133,7 +128,7 @@ static void op_amd_setup_ctrs(struct op_msrs const * const msrs)
 			CTRL_SET_HOST_ONLY(high, 0);
 			CTRL_SET_GUEST_ONLY(high, 0);
 
-			CTRL_WRITE(low, high, msrs, i);
+			wrmsr(msrs->controls[i].addr, low, high);
 		} else {
 			reset_value[i] = 0;
 		}
@@ -267,10 +262,10 @@ static int op_amd_check_ctrs(struct pt_regs * const regs,
 	for (i = 0 ; i < NUM_COUNTERS; ++i) {
 		if (!reset_value[i])
 			continue;
-		CTR_READ(low, high, msrs, i);
+		rdmsr(msrs->counters[i].addr, low, high);
 		if (CTR_OVERFLOWED(low)) {
 			oprofile_add_sample(regs, i);
-			CTR_WRITE(reset_value[i], msrs, i);
+			wrmsr(msrs->counters[i].addr, -(unsigned int)reset_value[i], -1);
 		}
 	}
 
@@ -286,9 +281,9 @@ static void op_amd_start(struct op_msrs const * const msrs)
 	int i;
 	for (i = 0 ; i < NUM_COUNTERS ; ++i) {
 		if (reset_value[i]) {
-			CTRL_READ(low, high, msrs, i);
+			rdmsr(msrs->controls[i].addr, low, high);
 			CTRL_SET_ACTIVE(low);
-			CTRL_WRITE(low, high, msrs, i);
+			wrmsr(msrs->controls[i].addr, low, high);
 		}
 	}
 
@@ -307,9 +302,9 @@ static void op_amd_stop(struct op_msrs const * const msrs)
 	for (i = 0 ; i < NUM_COUNTERS ; ++i) {
 		if (!reset_value[i])
 			continue;
-		CTRL_READ(low, high, msrs, i);
+		rdmsr(msrs->controls[i].addr, low, high);
 		CTRL_SET_INACTIVE(low);
-		CTRL_WRITE(low, high, msrs, i);
+		wrmsr(msrs->controls[i].addr, low, high);
 	}
 
 	op_amd_stop_ibs();
-- 
cgit v1.2.3


From 74c9a5c341bb1f6cbb5095b07c77230f19682ce8 Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Fri, 22 May 2009 19:47:38 +0200
Subject: x86/oprofile: remove MSR macros for ppro cpus

The macros CTRL_READ() and CTRL_WRITE() make the code hard to read and
maintain. This patch replaces them by rdmsr()/wrmsr() functions and
simplifies the code.

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/op_model_ppro.c | 19 ++++++++-----------
 1 file changed, 8 insertions(+), 11 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/op_model_ppro.c b/arch/x86/oprofile/op_model_ppro.c
index a922a1a815c..6c5d288c566 100644
--- a/arch/x86/oprofile/op_model_ppro.c
+++ b/arch/x86/oprofile/op_model_ppro.c
@@ -27,9 +27,6 @@ static int num_counters = 2;
 static int counter_width = 32;
 
 #define CTR_OVERFLOWED(n) (!((n) & (1ULL<<(counter_width-1))))
-
-#define CTRL_READ(l, h, msrs, c) do {rdmsr((msrs->controls[(c)].addr), (l), (h)); } while (0)
-#define CTRL_WRITE(l, h, msrs, c) do {wrmsr((msrs->controls[(c)].addr), (l), (h)); } while (0)
 #define CTRL_CLEAR(x) (x &= (1<<21))
 #define CTRL_SET_EVENT(val, e) (val |= e)
 
@@ -88,9 +85,9 @@ static void ppro_setup_ctrs(struct op_msrs const * const msrs)
 	for (i = 0 ; i < num_counters; ++i) {
 		if (unlikely(!CTRL_IS_RESERVED(msrs, i)))
 			continue;
-		CTRL_READ(low, high, msrs, i);
+		rdmsr(msrs->controls[i].addr, low, high);
 		CTRL_CLEAR(low);
-		CTRL_WRITE(low, high, msrs, i);
+		wrmsr(msrs->controls[i].addr, low, high);
 	}
 
 	/* avoid a false detection of ctr overflows in NMI handler */
@@ -107,14 +104,14 @@ static void ppro_setup_ctrs(struct op_msrs const * const msrs)
 
 			wrmsrl(msrs->counters[i].addr, -reset_value[i]);
 
-			CTRL_READ(low, high, msrs, i);
+			rdmsr(msrs->controls[i].addr, low, high);
 			CTRL_CLEAR(low);
 			CTRL_SET_ENABLE(low);
 			CTRL_SET_USR(low, counter_config[i].user);
 			CTRL_SET_KERN(low, counter_config[i].kernel);
 			CTRL_SET_UM(low, counter_config[i].unit_mask);
 			CTRL_SET_EVENT(low, counter_config[i].event);
-			CTRL_WRITE(low, high, msrs, i);
+			wrmsr(msrs->controls[i].addr, low, high);
 		} else {
 			reset_value[i] = 0;
 		}
@@ -162,9 +159,9 @@ static void ppro_start(struct op_msrs const * const msrs)
 		return;
 	for (i = 0; i < num_counters; ++i) {
 		if (reset_value[i]) {
-			CTRL_READ(low, high, msrs, i);
+			rdmsr(msrs->controls[i].addr, low, high);
 			CTRL_SET_ACTIVE(low);
-			CTRL_WRITE(low, high, msrs, i);
+			wrmsr(msrs->controls[i].addr, low, high);
 		}
 	}
 }
@@ -180,9 +177,9 @@ static void ppro_stop(struct op_msrs const * const msrs)
 	for (i = 0; i < num_counters; ++i) {
 		if (!reset_value[i])
 			continue;
-		CTRL_READ(low, high, msrs, i);
+		rdmsr(msrs->controls[i].addr, low, high);
 		CTRL_SET_INACTIVE(low);
-		CTRL_WRITE(low, high, msrs, i);
+		wrmsr(msrs->controls[i].addr, low, high);
 	}
 }
 
-- 
cgit v1.2.3


From 1131a478245b00664ae2dbc0f68db987b51fa806 Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Mon, 25 May 2009 20:23:23 +0200
Subject: x86/oprofile: remove MSR macros for p4 cpus

The macros CTRL_READ() and CTRL_WRITE() make the code hard to read and
maintain. This patch replaces them by rdmsr()/wrmsr() functions and
simplifies the code.

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/op_model_p4.c | 39 +++++++++++++++++++--------------------
 1 file changed, 19 insertions(+), 20 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/op_model_p4.c b/arch/x86/oprofile/op_model_p4.c
index 420c15e7123..365d8a9c03d 100644
--- a/arch/x86/oprofile/op_model_p4.c
+++ b/arch/x86/oprofile/op_model_p4.c
@@ -350,8 +350,6 @@ static struct p4_event_binding p4_events[NUM_EVENTS] = {
 #define ESCR_SET_OS_1(escr, os) ((escr) |= (((os) & 1) << 1))
 #define ESCR_SET_EVENT_SELECT(escr, sel) ((escr) |= (((sel) & 0x3f) << 25))
 #define ESCR_SET_EVENT_MASK(escr, mask) ((escr) |= (((mask) & 0xffff) << 9))
-#define ESCR_READ(escr, high, ev, i) do {rdmsr(ev->bindings[(i)].escr_address, (escr), (high)); } while (0)
-#define ESCR_WRITE(escr, high, ev, i) do {wrmsr(ev->bindings[(i)].escr_address, (escr), (high)); } while (0)
 
 #define CCCR_RESERVED_BITS 0x38030FFF
 #define CCCR_CLEAR(cccr) ((cccr) &= CCCR_RESERVED_BITS)
@@ -361,13 +359,9 @@ static struct p4_event_binding p4_events[NUM_EVENTS] = {
 #define CCCR_SET_PMI_OVF_1(cccr) ((cccr) |= (1<<27))
 #define CCCR_SET_ENABLE(cccr) ((cccr) |= (1<<12))
 #define CCCR_SET_DISABLE(cccr) ((cccr) &= ~(1<<12))
-#define CCCR_READ(low, high, i) do {rdmsr(p4_counters[(i)].cccr_address, (low), (high)); } while (0)
-#define CCCR_WRITE(low, high, i) do {wrmsr(p4_counters[(i)].cccr_address, (low), (high)); } while (0)
 #define CCCR_OVF_P(cccr) ((cccr) & (1U<<31))
 #define CCCR_CLEAR_OVF(cccr) ((cccr) &= (~(1U<<31)))
 
-#define CTR_READ(l, h, i) do {rdmsr(p4_counters[(i)].counter_address, (l), (h)); } while (0)
-#define CTR_WRITE(l, i) do {wrmsr(p4_counters[(i)].counter_address, -(u32)(l), -1); } while (0)
 #define CTR_OVERFLOW_P(ctr) (!((ctr) & 0x80000000))
 
 
@@ -513,7 +507,7 @@ static void pmc_setup_one_p4_counter(unsigned int ctr)
 		if (ev->bindings[i].virt_counter & counter_bit) {
 
 			/* modify ESCR */
-			ESCR_READ(escr, high, ev, i);
+			rdmsr(ev->bindings[i].escr_address, escr, high);
 			ESCR_CLEAR(escr);
 			if (stag == 0) {
 				ESCR_SET_USR_0(escr, counter_config[ctr].user);
@@ -524,10 +518,11 @@ static void pmc_setup_one_p4_counter(unsigned int ctr)
 			}
 			ESCR_SET_EVENT_SELECT(escr, ev->event_select);
 			ESCR_SET_EVENT_MASK(escr, counter_config[ctr].unit_mask);
-			ESCR_WRITE(escr, high, ev, i);
+			wrmsr(ev->bindings[i].escr_address, escr, high);
 
 			/* modify CCCR */
-			CCCR_READ(cccr, high, VIRT_CTR(stag, ctr));
+			rdmsr(p4_counters[VIRT_CTR(stag, ctr)].cccr_address,
+			      cccr, high);
 			CCCR_CLEAR(cccr);
 			CCCR_SET_REQUIRED_BITS(cccr);
 			CCCR_SET_ESCR_SELECT(cccr, ev->escr_select);
@@ -535,7 +530,8 @@ static void pmc_setup_one_p4_counter(unsigned int ctr)
 				CCCR_SET_PMI_OVF_0(cccr);
 			else
 				CCCR_SET_PMI_OVF_1(cccr);
-			CCCR_WRITE(cccr, high, VIRT_CTR(stag, ctr));
+			wrmsr(p4_counters[VIRT_CTR(stag, ctr)].cccr_address,
+			      cccr, high);
 			return;
 		}
 	}
@@ -582,7 +578,8 @@ static void p4_setup_ctrs(struct op_msrs const * const msrs)
 		if ((counter_config[i].enabled) && (CTRL_IS_RESERVED(msrs, i))) {
 			reset_value[i] = counter_config[i].count;
 			pmc_setup_one_p4_counter(i);
-			CTR_WRITE(counter_config[i].count, VIRT_CTR(stag, i));
+			wrmsr(p4_counters[VIRT_CTR(stag, i)].counter_address,
+			      -(u32)counter_config[i].count, -1);
 		} else {
 			reset_value[i] = 0;
 		}
@@ -622,14 +619,16 @@ static int p4_check_ctrs(struct pt_regs * const regs,
 
 		real = VIRT_CTR(stag, i);
 
-		CCCR_READ(low, high, real);
-		CTR_READ(ctr, high, real);
+		rdmsr(p4_counters[real].cccr_address, low, high);
+		rdmsr(p4_counters[real].counter_address, ctr, high);
 		if (CCCR_OVF_P(low) || CTR_OVERFLOW_P(ctr)) {
 			oprofile_add_sample(regs, i);
-			CTR_WRITE(reset_value[i], real);
+			wrmsr(p4_counters[real].counter_address,
+			      -(u32)reset_value[i], -1);
 			CCCR_CLEAR_OVF(low);
-			CCCR_WRITE(low, high, real);
-			CTR_WRITE(reset_value[i], real);
+			wrmsr(p4_counters[real].cccr_address, low, high);
+			wrmsr(p4_counters[real].counter_address,
+			      -(u32)reset_value[i], -1);
 		}
 	}
 
@@ -651,9 +650,9 @@ static void p4_start(struct op_msrs const * const msrs)
 	for (i = 0; i < num_counters; ++i) {
 		if (!reset_value[i])
 			continue;
-		CCCR_READ(low, high, VIRT_CTR(stag, i));
+		rdmsr(p4_counters[VIRT_CTR(stag, i)].cccr_address, low, high);
 		CCCR_SET_ENABLE(low);
-		CCCR_WRITE(low, high, VIRT_CTR(stag, i));
+		wrmsr(p4_counters[VIRT_CTR(stag, i)].cccr_address, low, high);
 	}
 }
 
@@ -668,9 +667,9 @@ static void p4_stop(struct op_msrs const * const msrs)
 	for (i = 0; i < num_counters; ++i) {
 		if (!reset_value[i])
 			continue;
-		CCCR_READ(low, high, VIRT_CTR(stag, i));
+		rdmsr(p4_counters[VIRT_CTR(stag, i)].cccr_address, low, high);
 		CCCR_SET_DISABLE(low);
-		CCCR_WRITE(low, high, VIRT_CTR(stag, i));
+		wrmsr(p4_counters[VIRT_CTR(stag, i)].cccr_address, low, high);
 	}
 }
 
-- 
cgit v1.2.3


From ec064c093e254f4433afb17dcef7f964c76436af Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Mon, 25 May 2009 15:05:50 +0200
Subject: x86/oprofile: fix and cleanup CTRL_SET_* macros

This patch fixes missing braces around macro parameters. Macro
definitions from intel_arch_perfmon.h are used where possible.

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/op_model_ppro.c |  1 -
 arch/x86/oprofile/op_x86_model.h  | 18 ++++++++++--------
 2 files changed, 10 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/op_model_ppro.c b/arch/x86/oprofile/op_model_ppro.c
index 6c5d288c566..61ee8f64053 100644
--- a/arch/x86/oprofile/op_model_ppro.c
+++ b/arch/x86/oprofile/op_model_ppro.c
@@ -18,7 +18,6 @@
 #include <asm/msr.h>
 #include <asm/apic.h>
 #include <asm/nmi.h>
-#include <asm/intel_arch_perfmon.h>
 
 #include "op_x86_model.h"
 #include "op_counter.h"
diff --git a/arch/x86/oprofile/op_x86_model.h b/arch/x86/oprofile/op_x86_model.h
index c80ec7d0999..a207b1c46e2 100644
--- a/arch/x86/oprofile/op_x86_model.h
+++ b/arch/x86/oprofile/op_x86_model.h
@@ -11,14 +11,16 @@
 #ifndef OP_X86_MODEL_H
 #define OP_X86_MODEL_H
 
-#define CTR_IS_RESERVED(msrs, c) (msrs->counters[(c)].addr ? 1 : 0)
-#define CTRL_IS_RESERVED(msrs, c) (msrs->controls[(c)].addr ? 1 : 0)
-#define CTRL_SET_ACTIVE(n) (n |= (1<<22))
-#define CTRL_SET_ENABLE(val) (val |= 1<<20)
-#define CTRL_SET_INACTIVE(n) (n &= ~(1<<22))
-#define CTRL_SET_KERN(val, k) (val |= ((k & 1) << 17))
-#define CTRL_SET_UM(val, m) (val |= (m << 8))
-#define CTRL_SET_USR(val, u) (val |= ((u & 1) << 16))
+#include <asm/intel_arch_perfmon.h>
+
+#define CTR_IS_RESERVED(msrs, c)	((msrs)->counters[(c)].addr ? 1 : 0)
+#define CTRL_IS_RESERVED(msrs, c)	((msrs)->controls[(c)].addr ? 1 : 0)
+#define CTRL_SET_ACTIVE(val)		((val) |= ARCH_PERFMON_EVENTSEL0_ENABLE)
+#define CTRL_SET_ENABLE(val)		((val) |= ARCH_PERFMON_EVENTSEL_INT)
+#define CTRL_SET_INACTIVE(val)		((val) &= ~ARCH_PERFMON_EVENTSEL0_ENABLE)
+#define CTRL_SET_KERN(val, k)		((val) |= ((k) ? ARCH_PERFMON_EVENTSEL_OS : 0))
+#define CTRL_SET_USR(val, u)		((val) |= ((u) ? ARCH_PERFMON_EVENTSEL_USR : 0))
+#define CTRL_SET_UM(val, m)		((val) |= ((m) << 8))
 
 struct op_saved_msr {
 	unsigned int high;
-- 
cgit v1.2.3


From 9c59354b48ce9cf28048b02fea73dd0236f876ea Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Mon, 25 May 2009 18:16:43 +0200
Subject: x86/oprofile: remove unused macros for AMD virtualization profiling

The use of the macros has no effect. The oprofilefs has to be extended
first to support these features.

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/op_model_amd.c | 5 -----
 1 file changed, 5 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/op_model_amd.c b/arch/x86/oprofile/op_model_amd.c
index c6181c265ae..aaa7ffaed6b 100644
--- a/arch/x86/oprofile/op_model_amd.c
+++ b/arch/x86/oprofile/op_model_amd.c
@@ -31,8 +31,6 @@
 #define CTRL_CLEAR_HI(x) (x &= 0xfffffcf0)
 #define CTRL_SET_EVENT_LOW(val, e) (val |= (e & 0xff))
 #define CTRL_SET_EVENT_HIGH(val, e) (val |= ((e >> 8) & 0xf))
-#define CTRL_SET_HOST_ONLY(val, h) (val |= ((h & 1) << 9))
-#define CTRL_SET_GUEST_ONLY(val, h) (val |= ((h & 1) << 8))
 
 static unsigned long reset_value[NUM_COUNTERS];
 
@@ -125,9 +123,6 @@ static void op_amd_setup_ctrs(struct op_msrs const * const msrs)
 			CTRL_SET_UM(low, counter_config[i].unit_mask);
 			CTRL_SET_EVENT_LOW(low, counter_config[i].event);
 			CTRL_SET_EVENT_HIGH(high, counter_config[i].event);
-			CTRL_SET_HOST_ONLY(high, 0);
-			CTRL_SET_GUEST_ONLY(high, 0);
-
 			wrmsr(msrs->controls[i].addr, low, high);
 		} else {
 			reset_value[i] = 0;
-- 
cgit v1.2.3


From ef8828ddf828174785421af67c281144d4b8e796 Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Mon, 25 May 2009 19:31:44 +0200
Subject: x86/oprofile: pass the model to setup_ctrs() functions

In follow-on patches the setup_ctrs() functions will need data that
describes the model. This patch extends the function argument list to
pass a pointer of the model to these function.

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/nmi_int.c       | 2 +-
 arch/x86/oprofile/op_model_amd.c  | 3 ++-
 arch/x86/oprofile/op_model_p4.c   | 3 ++-
 arch/x86/oprofile/op_model_ppro.c | 3 ++-
 arch/x86/oprofile/op_x86_model.h  | 3 ++-
 5 files changed, 9 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index ae0ab03959b..c31f87bbf43 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -125,7 +125,7 @@ static void nmi_cpu_setup(void *dummy)
 	int cpu = smp_processor_id();
 	struct op_msrs *msrs = &per_cpu(cpu_msrs, cpu);
 	spin_lock(&oprofilefs_lock);
-	model->setup_ctrs(msrs);
+	model->setup_ctrs(model, msrs);
 	spin_unlock(&oprofilefs_lock);
 	per_cpu(saved_lvtpc, cpu) = apic_read(APIC_LVTPC);
 	apic_write(APIC_LVTPC, APIC_DM_NMI);
diff --git a/arch/x86/oprofile/op_model_amd.c b/arch/x86/oprofile/op_model_amd.c
index aaa7ffaed6b..86e0a01ba12 100644
--- a/arch/x86/oprofile/op_model_amd.c
+++ b/arch/x86/oprofile/op_model_amd.c
@@ -85,7 +85,8 @@ static void op_amd_fill_in_addresses(struct op_msrs * const msrs)
 }
 
 
-static void op_amd_setup_ctrs(struct op_msrs const * const msrs)
+static void op_amd_setup_ctrs(struct op_x86_model_spec const *model,
+			      struct op_msrs const * const msrs)
 {
 	unsigned int low, high;
 	int i;
diff --git a/arch/x86/oprofile/op_model_p4.c b/arch/x86/oprofile/op_model_p4.c
index 365d8a9c03d..05ba0287b1f 100644
--- a/arch/x86/oprofile/op_model_p4.c
+++ b/arch/x86/oprofile/op_model_p4.c
@@ -542,7 +542,8 @@ static void pmc_setup_one_p4_counter(unsigned int ctr)
 }
 
 
-static void p4_setup_ctrs(struct op_msrs const * const msrs)
+static void p4_setup_ctrs(struct op_x86_model_spec const *model,
+			  struct op_msrs const * const msrs)
 {
 	unsigned int i;
 	unsigned int low, high;
diff --git a/arch/x86/oprofile/op_model_ppro.c b/arch/x86/oprofile/op_model_ppro.c
index 61ee8f64053..40b44ee521d 100644
--- a/arch/x86/oprofile/op_model_ppro.c
+++ b/arch/x86/oprofile/op_model_ppro.c
@@ -51,7 +51,8 @@ static void ppro_fill_in_addresses(struct op_msrs * const msrs)
 }
 
 
-static void ppro_setup_ctrs(struct op_msrs const * const msrs)
+static void ppro_setup_ctrs(struct op_x86_model_spec const *model,
+			    struct op_msrs const * const msrs)
 {
 	unsigned int low, high;
 	int i;
diff --git a/arch/x86/oprofile/op_x86_model.h b/arch/x86/oprofile/op_x86_model.h
index a207b1c46e2..6161c7f0e7f 100644
--- a/arch/x86/oprofile/op_x86_model.h
+++ b/arch/x86/oprofile/op_x86_model.h
@@ -48,7 +48,8 @@ struct op_x86_model_spec {
 	int		(*init)(struct oprofile_operations *ops);
 	void		(*exit)(void);
 	void		(*fill_in_addresses)(struct op_msrs * const msrs);
-	void		(*setup_ctrs)(struct op_msrs const * const msrs);
+	void		(*setup_ctrs)(struct op_x86_model_spec const *model,
+				      struct op_msrs const * const msrs);
 	int		(*check_ctrs)(struct pt_regs * const regs,
 				      struct op_msrs const * const msrs);
 	void		(*start)(struct op_msrs const * const msrs);
-- 
cgit v1.2.3


From 3370d358569755625aba4d9a846a040ce691d9ed Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Mon, 25 May 2009 15:10:32 +0200
Subject: x86/oprofile: replace macros to calculate control register

This patch introduces op_x86_get_ctrl() to calculate the value of the
performance control register. This is generic code usable for all
models. The event and reserved masks are model specific and stored in
struct op_x86_model_spec. 64 bit MSR functions are used now. The patch
removes many hard to read macros used for ctrl calculation.

The function op_x86_get_ctrl() is common code and the first step to
further merge performance counter implementations for x86 models.

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/nmi_int.c       | 20 +++++++++++++++++++
 arch/x86/oprofile/op_model_amd.c  | 41 +++++++++++++++------------------------
 arch/x86/oprofile/op_model_ppro.c | 29 +++++++++++++--------------
 arch/x86/oprofile/op_x86_model.h  | 15 ++++++++++----
 4 files changed, 60 insertions(+), 45 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index c31f87bbf43..388ee15e0e4 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -31,6 +31,26 @@ static DEFINE_PER_CPU(unsigned long, saved_lvtpc);
 /* 0 == registered but off, 1 == registered and on */
 static int nmi_enabled = 0;
 
+/* common functions */
+
+u64 op_x86_get_ctrl(struct op_x86_model_spec const *model,
+		    struct op_counter_config *counter_config)
+{
+	u64 val = 0;
+	u16 event = (u16)counter_config->event;
+
+	val |= ARCH_PERFMON_EVENTSEL_INT;
+	val |= counter_config->user ? ARCH_PERFMON_EVENTSEL_USR : 0;
+	val |= counter_config->kernel ? ARCH_PERFMON_EVENTSEL_OS : 0;
+	val |= (counter_config->unit_mask & 0xFF) << 8;
+	event &= model->event_mask ? model->event_mask : 0xFF;
+	val |= event & 0xFF;
+	val |= (event & 0x0F00) << 24;
+
+	return val;
+}
+
+
 static int profile_exceptions_notify(struct notifier_block *self,
 				     unsigned long val, void *data)
 {
diff --git a/arch/x86/oprofile/op_model_amd.c b/arch/x86/oprofile/op_model_amd.c
index 86e0a01ba12..2406ab86360 100644
--- a/arch/x86/oprofile/op_model_amd.c
+++ b/arch/x86/oprofile/op_model_amd.c
@@ -25,12 +25,11 @@
 
 #define NUM_COUNTERS 4
 #define NUM_CONTROLS 4
+#define OP_EVENT_MASK			0x0FFF
+
+#define MSR_AMD_EVENTSEL_RESERVED	((0xFFFFFCF0ULL<<32)|(1ULL<<21))
 
 #define CTR_OVERFLOWED(n) (!((n) & (1U<<31)))
-#define CTRL_CLEAR_LO(x) (x &= (1<<21))
-#define CTRL_CLEAR_HI(x) (x &= 0xfffffcf0)
-#define CTRL_SET_EVENT_LOW(val, e) (val |= (e & 0xff))
-#define CTRL_SET_EVENT_HIGH(val, e) (val |= ((e >> 8) & 0xf))
 
 static unsigned long reset_value[NUM_COUNTERS];
 
@@ -84,21 +83,19 @@ static void op_amd_fill_in_addresses(struct op_msrs * const msrs)
 	}
 }
 
-
 static void op_amd_setup_ctrs(struct op_x86_model_spec const *model,
 			      struct op_msrs const * const msrs)
 {
-	unsigned int low, high;
+	u64 val;
 	int i;
 
 	/* clear all counters */
 	for (i = 0 ; i < NUM_CONTROLS; ++i) {
 		if (unlikely(!CTRL_IS_RESERVED(msrs, i)))
 			continue;
-		rdmsr(msrs->controls[i].addr, low, high);
-		CTRL_CLEAR_LO(low);
-		CTRL_CLEAR_HI(high);
-		wrmsr(msrs->controls[i].addr, low, high);
+		rdmsrl(msrs->controls[i].addr, val);
+		val &= model->reserved;
+		wrmsrl(msrs->controls[i].addr, val);
 	}
 
 	/* avoid a false detection of ctr overflows in NMI handler */
@@ -112,19 +109,11 @@ static void op_amd_setup_ctrs(struct op_x86_model_spec const *model,
 	for (i = 0; i < NUM_COUNTERS; ++i) {
 		if ((counter_config[i].enabled) && (CTR_IS_RESERVED(msrs, i))) {
 			reset_value[i] = counter_config[i].count;
-
 			wrmsr(msrs->counters[i].addr, -(unsigned int)counter_config[i].count, -1);
-
-			rdmsr(msrs->controls[i].addr, low, high);
-			CTRL_CLEAR_LO(low);
-			CTRL_CLEAR_HI(high);
-			CTRL_SET_ENABLE(low);
-			CTRL_SET_USR(low, counter_config[i].user);
-			CTRL_SET_KERN(low, counter_config[i].kernel);
-			CTRL_SET_UM(low, counter_config[i].unit_mask);
-			CTRL_SET_EVENT_LOW(low, counter_config[i].event);
-			CTRL_SET_EVENT_HIGH(high, counter_config[i].event);
-			wrmsr(msrs->controls[i].addr, low, high);
+			rdmsrl(msrs->controls[i].addr, val);
+			val &= model->reserved;
+			val |= op_x86_get_ctrl(model, &counter_config[i]);
+			wrmsrl(msrs->controls[i].addr, val);
 		} else {
 			reset_value[i] = 0;
 		}
@@ -486,14 +475,16 @@ static void op_amd_exit(void) {}
 #endif /* CONFIG_OPROFILE_IBS */
 
 struct op_x86_model_spec const op_amd_spec = {
-	.init			= op_amd_init,
-	.exit			= op_amd_exit,
 	.num_counters		= NUM_COUNTERS,
 	.num_controls		= NUM_CONTROLS,
+	.reserved		= MSR_AMD_EVENTSEL_RESERVED,
+	.event_mask		= OP_EVENT_MASK,
+	.init			= op_amd_init,
+	.exit			= op_amd_exit,
 	.fill_in_addresses	= &op_amd_fill_in_addresses,
 	.setup_ctrs		= &op_amd_setup_ctrs,
 	.check_ctrs		= &op_amd_check_ctrs,
 	.start			= &op_amd_start,
 	.stop			= &op_amd_stop,
-	.shutdown		= &op_amd_shutdown
+	.shutdown		= &op_amd_shutdown,
 };
diff --git a/arch/x86/oprofile/op_model_ppro.c b/arch/x86/oprofile/op_model_ppro.c
index 40b44ee521d..3092f998baf 100644
--- a/arch/x86/oprofile/op_model_ppro.c
+++ b/arch/x86/oprofile/op_model_ppro.c
@@ -10,6 +10,7 @@
  * @author Philippe Elie
  * @author Graydon Hoare
  * @author Andi Kleen
+ * @author Robert Richter <robert.richter@amd.com>
  */
 
 #include <linux/oprofile.h>
@@ -26,8 +27,8 @@ static int num_counters = 2;
 static int counter_width = 32;
 
 #define CTR_OVERFLOWED(n) (!((n) & (1ULL<<(counter_width-1))))
-#define CTRL_CLEAR(x) (x &= (1<<21))
-#define CTRL_SET_EVENT(val, e) (val |= e)
+
+#define MSR_PPRO_EVENTSEL_RESERVED	((0xFFFFFFFFULL<<32)|(1ULL<<21))
 
 static u64 *reset_value;
 
@@ -54,7 +55,7 @@ static void ppro_fill_in_addresses(struct op_msrs * const msrs)
 static void ppro_setup_ctrs(struct op_x86_model_spec const *model,
 			    struct op_msrs const * const msrs)
 {
-	unsigned int low, high;
+	u64 val;
 	int i;
 
 	if (!reset_value) {
@@ -85,9 +86,9 @@ static void ppro_setup_ctrs(struct op_x86_model_spec const *model,
 	for (i = 0 ; i < num_counters; ++i) {
 		if (unlikely(!CTRL_IS_RESERVED(msrs, i)))
 			continue;
-		rdmsr(msrs->controls[i].addr, low, high);
-		CTRL_CLEAR(low);
-		wrmsr(msrs->controls[i].addr, low, high);
+		rdmsrl(msrs->controls[i].addr, val);
+		val &= model->reserved;
+		wrmsrl(msrs->controls[i].addr, val);
 	}
 
 	/* avoid a false detection of ctr overflows in NMI handler */
@@ -101,17 +102,11 @@ static void ppro_setup_ctrs(struct op_x86_model_spec const *model,
 	for (i = 0; i < num_counters; ++i) {
 		if ((counter_config[i].enabled) && (CTR_IS_RESERVED(msrs, i))) {
 			reset_value[i] = counter_config[i].count;
-
 			wrmsrl(msrs->counters[i].addr, -reset_value[i]);
-
-			rdmsr(msrs->controls[i].addr, low, high);
-			CTRL_CLEAR(low);
-			CTRL_SET_ENABLE(low);
-			CTRL_SET_USR(low, counter_config[i].user);
-			CTRL_SET_KERN(low, counter_config[i].kernel);
-			CTRL_SET_UM(low, counter_config[i].unit_mask);
-			CTRL_SET_EVENT(low, counter_config[i].event);
-			wrmsr(msrs->controls[i].addr, low, high);
+			rdmsrl(msrs->controls[i].addr, val);
+			val &= model->reserved;
+			val |= op_x86_get_ctrl(model, &counter_config[i]);
+			wrmsrl(msrs->controls[i].addr, val);
 		} else {
 			reset_value[i] = 0;
 		}
@@ -205,6 +200,7 @@ static void ppro_shutdown(struct op_msrs const * const msrs)
 struct op_x86_model_spec const op_ppro_spec = {
 	.num_counters		= 2,
 	.num_controls		= 2,
+	.reserved		= MSR_PPRO_EVENTSEL_RESERVED,
 	.fill_in_addresses	= &ppro_fill_in_addresses,
 	.setup_ctrs		= &ppro_setup_ctrs,
 	.check_ctrs		= &ppro_check_ctrs,
@@ -249,6 +245,7 @@ static int arch_perfmon_init(struct oprofile_operations *ignore)
 }
 
 struct op_x86_model_spec op_arch_perfmon_spec = {
+	.reserved		= MSR_PPRO_EVENTSEL_RESERVED,
 	.init			= &arch_perfmon_init,
 	/* num_counters/num_controls filled in at runtime */
 	.fill_in_addresses	= &ppro_fill_in_addresses,
diff --git a/arch/x86/oprofile/op_x86_model.h b/arch/x86/oprofile/op_x86_model.h
index 6161c7f0e7f..3220d4ce632 100644
--- a/arch/x86/oprofile/op_x86_model.h
+++ b/arch/x86/oprofile/op_x86_model.h
@@ -6,21 +6,19 @@
  * @remark Read the file COPYING
  *
  * @author Graydon Hoare
+ * @author Robert Richter <robert.richter@amd.com>
  */
 
 #ifndef OP_X86_MODEL_H
 #define OP_X86_MODEL_H
 
+#include <asm/types.h>
 #include <asm/intel_arch_perfmon.h>
 
 #define CTR_IS_RESERVED(msrs, c)	((msrs)->counters[(c)].addr ? 1 : 0)
 #define CTRL_IS_RESERVED(msrs, c)	((msrs)->controls[(c)].addr ? 1 : 0)
 #define CTRL_SET_ACTIVE(val)		((val) |= ARCH_PERFMON_EVENTSEL0_ENABLE)
-#define CTRL_SET_ENABLE(val)		((val) |= ARCH_PERFMON_EVENTSEL_INT)
 #define CTRL_SET_INACTIVE(val)		((val) &= ~ARCH_PERFMON_EVENTSEL0_ENABLE)
-#define CTRL_SET_KERN(val, k)		((val) |= ((k) ? ARCH_PERFMON_EVENTSEL_OS : 0))
-#define CTRL_SET_USR(val, u)		((val) |= ((u) ? ARCH_PERFMON_EVENTSEL_USR : 0))
-#define CTRL_SET_UM(val, m)		((val) |= ((m) << 8))
 
 struct op_saved_msr {
 	unsigned int high;
@@ -39,12 +37,16 @@ struct op_msrs {
 
 struct pt_regs;
 
+struct oprofile_operations;
+
 /* The model vtable abstracts the differences between
  * various x86 CPU models' perfctr support.
  */
 struct op_x86_model_spec {
 	unsigned int	num_counters;
 	unsigned int	num_controls;
+	u64		reserved;
+	u16		event_mask;
 	int		(*init)(struct oprofile_operations *ops);
 	void		(*exit)(void);
 	void		(*fill_in_addresses)(struct op_msrs * const msrs);
@@ -57,6 +59,11 @@ struct op_x86_model_spec {
 	void		(*shutdown)(struct op_msrs const * const msrs);
 };
 
+struct op_counter_config;
+
+extern u64 op_x86_get_ctrl(struct op_x86_model_spec const *model,
+			   struct op_counter_config *counter_config);
+
 extern struct op_x86_model_spec const op_ppro_spec;
 extern struct op_x86_model_spec const op_p4_spec;
 extern struct op_x86_model_spec const op_p4_ht2_spec;
-- 
cgit v1.2.3


From 42399adb239d4f1413899cc618ecf640779e79df Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Mon, 25 May 2009 17:59:06 +0200
Subject: x86/oprofile: replace CTR_OVERFLOWED macros

The patch replaces all CTR_OVERFLOWED macros. 64 bit MSR functions and
64 bit counter values are used now. Thus, it will be easier to later
extend the models to use more than 32 bit width counters.

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/op_model_amd.c  | 16 ++++++++--------
 arch/x86/oprofile/op_model_p4.c   |  6 +++---
 arch/x86/oprofile/op_model_ppro.c | 10 ++++------
 3 files changed, 15 insertions(+), 17 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/op_model_amd.c b/arch/x86/oprofile/op_model_amd.c
index 2406ab86360..b5d678fbf03 100644
--- a/arch/x86/oprofile/op_model_amd.c
+++ b/arch/x86/oprofile/op_model_amd.c
@@ -26,11 +26,10 @@
 #define NUM_COUNTERS 4
 #define NUM_CONTROLS 4
 #define OP_EVENT_MASK			0x0FFF
+#define OP_CTR_OVERFLOW			(1ULL<<31)
 
 #define MSR_AMD_EVENTSEL_RESERVED	((0xFFFFFCF0ULL<<32)|(1ULL<<21))
 
-#define CTR_OVERFLOWED(n) (!((n) & (1U<<31)))
-
 static unsigned long reset_value[NUM_COUNTERS];
 
 #ifdef CONFIG_OPROFILE_IBS
@@ -241,17 +240,18 @@ static inline void op_amd_stop_ibs(void) { }
 static int op_amd_check_ctrs(struct pt_regs * const regs,
 			     struct op_msrs const * const msrs)
 {
-	unsigned int low, high;
+	u64 val;
 	int i;
 
 	for (i = 0 ; i < NUM_COUNTERS; ++i) {
 		if (!reset_value[i])
 			continue;
-		rdmsr(msrs->counters[i].addr, low, high);
-		if (CTR_OVERFLOWED(low)) {
-			oprofile_add_sample(regs, i);
-			wrmsr(msrs->counters[i].addr, -(unsigned int)reset_value[i], -1);
-		}
+		rdmsrl(msrs->counters[i].addr, val);
+		/* bit is clear if overflowed: */
+		if (val & OP_CTR_OVERFLOW)
+			continue;
+		oprofile_add_sample(regs, i);
+		wrmsr(msrs->counters[i].addr, -(unsigned int)reset_value[i], -1);
 	}
 
 	op_amd_handle_ibs(regs, msrs);
diff --git a/arch/x86/oprofile/op_model_p4.c b/arch/x86/oprofile/op_model_p4.c
index 05ba0287b1f..ac4ca28b9ed 100644
--- a/arch/x86/oprofile/op_model_p4.c
+++ b/arch/x86/oprofile/op_model_p4.c
@@ -32,6 +32,8 @@
 #define NUM_CCCRS_HT2 9
 #define NUM_CONTROLS_HT2 (NUM_ESCRS_HT2 + NUM_CCCRS_HT2)
 
+#define OP_CTR_OVERFLOW			(1ULL<<31)
+
 static unsigned int num_counters = NUM_COUNTERS_NON_HT;
 static unsigned int num_controls = NUM_CONTROLS_NON_HT;
 
@@ -362,8 +364,6 @@ static struct p4_event_binding p4_events[NUM_EVENTS] = {
 #define CCCR_OVF_P(cccr) ((cccr) & (1U<<31))
 #define CCCR_CLEAR_OVF(cccr) ((cccr) &= (~(1U<<31)))
 
-#define CTR_OVERFLOW_P(ctr) (!((ctr) & 0x80000000))
-
 
 /* this assigns a "stagger" to the current CPU, which is used throughout
    the code in this module as an extra array offset, to select the "even"
@@ -622,7 +622,7 @@ static int p4_check_ctrs(struct pt_regs * const regs,
 
 		rdmsr(p4_counters[real].cccr_address, low, high);
 		rdmsr(p4_counters[real].counter_address, ctr, high);
-		if (CCCR_OVF_P(low) || CTR_OVERFLOW_P(ctr)) {
+		if (CCCR_OVF_P(low) || !(ctr & OP_CTR_OVERFLOW)) {
 			oprofile_add_sample(regs, i);
 			wrmsr(p4_counters[real].counter_address,
 			      -(u32)reset_value[i], -1);
diff --git a/arch/x86/oprofile/op_model_ppro.c b/arch/x86/oprofile/op_model_ppro.c
index 3092f998baf..82db396dc3e 100644
--- a/arch/x86/oprofile/op_model_ppro.c
+++ b/arch/x86/oprofile/op_model_ppro.c
@@ -26,8 +26,6 @@
 static int num_counters = 2;
 static int counter_width = 32;
 
-#define CTR_OVERFLOWED(n) (!((n) & (1ULL<<(counter_width-1))))
-
 #define MSR_PPRO_EVENTSEL_RESERVED	((0xFFFFFFFFULL<<32)|(1ULL<<21))
 
 static u64 *reset_value;
@@ -124,10 +122,10 @@ static int ppro_check_ctrs(struct pt_regs * const regs,
 		if (!reset_value[i])
 			continue;
 		rdmsrl(msrs->counters[i].addr, val);
-		if (CTR_OVERFLOWED(val)) {
-			oprofile_add_sample(regs, i);
-			wrmsrl(msrs->counters[i].addr, -reset_value[i]);
-		}
+		if (val & (1ULL << (counter_width - 1)))
+			continue;
+		oprofile_add_sample(regs, i);
+		wrmsrl(msrs->counters[i].addr, -reset_value[i]);
 	}
 
 	/* Only P6 based Pentium M need to re-unmask the apic vector but it
-- 
cgit v1.2.3


From dea3766ca052a4f572b16a23a322553c064d75af Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Mon, 25 May 2009 18:11:52 +0200
Subject: x86/oprofile: replace CTRL_SET_*ACTIVE macros

The patch replaces all CTRL_SET_*ACTIVE macros. 64 bit MSR functions
and 64 bit counter values are used now. The code uses bit masks from
<asm/intel_arch_perfmon.h>.

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/op_model_amd.c  | 16 ++++++++--------
 arch/x86/oprofile/op_model_ppro.c | 16 ++++++++--------
 arch/x86/oprofile/op_x86_model.h  |  2 --
 3 files changed, 16 insertions(+), 18 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/op_model_amd.c b/arch/x86/oprofile/op_model_amd.c
index b5d678fbf03..4ac9d283e8d 100644
--- a/arch/x86/oprofile/op_model_amd.c
+++ b/arch/x86/oprofile/op_model_amd.c
@@ -262,13 +262,13 @@ static int op_amd_check_ctrs(struct pt_regs * const regs,
 
 static void op_amd_start(struct op_msrs const * const msrs)
 {
-	unsigned int low, high;
+	u64 val;
 	int i;
 	for (i = 0 ; i < NUM_COUNTERS ; ++i) {
 		if (reset_value[i]) {
-			rdmsr(msrs->controls[i].addr, low, high);
-			CTRL_SET_ACTIVE(low);
-			wrmsr(msrs->controls[i].addr, low, high);
+			rdmsrl(msrs->controls[i].addr, val);
+			val |= ARCH_PERFMON_EVENTSEL0_ENABLE;
+			wrmsrl(msrs->controls[i].addr, val);
 		}
 	}
 
@@ -277,7 +277,7 @@ static void op_amd_start(struct op_msrs const * const msrs)
 
 static void op_amd_stop(struct op_msrs const * const msrs)
 {
-	unsigned int low, high;
+	u64 val;
 	int i;
 
 	/*
@@ -287,9 +287,9 @@ static void op_amd_stop(struct op_msrs const * const msrs)
 	for (i = 0 ; i < NUM_COUNTERS ; ++i) {
 		if (!reset_value[i])
 			continue;
-		rdmsr(msrs->controls[i].addr, low, high);
-		CTRL_SET_INACTIVE(low);
-		wrmsr(msrs->controls[i].addr, low, high);
+		rdmsrl(msrs->controls[i].addr, val);
+		val &= ~ARCH_PERFMON_EVENTSEL0_ENABLE;
+		wrmsrl(msrs->controls[i].addr, val);
 	}
 
 	op_amd_stop_ibs();
diff --git a/arch/x86/oprofile/op_model_ppro.c b/arch/x86/oprofile/op_model_ppro.c
index 82db396dc3e..566b43f0b6c 100644
--- a/arch/x86/oprofile/op_model_ppro.c
+++ b/arch/x86/oprofile/op_model_ppro.c
@@ -145,16 +145,16 @@ static int ppro_check_ctrs(struct pt_regs * const regs,
 
 static void ppro_start(struct op_msrs const * const msrs)
 {
-	unsigned int low, high;
+	u64 val;
 	int i;
 
 	if (!reset_value)
 		return;
 	for (i = 0; i < num_counters; ++i) {
 		if (reset_value[i]) {
-			rdmsr(msrs->controls[i].addr, low, high);
-			CTRL_SET_ACTIVE(low);
-			wrmsr(msrs->controls[i].addr, low, high);
+			rdmsrl(msrs->controls[i].addr, val);
+			val |= ARCH_PERFMON_EVENTSEL0_ENABLE;
+			wrmsrl(msrs->controls[i].addr, val);
 		}
 	}
 }
@@ -162,7 +162,7 @@ static void ppro_start(struct op_msrs const * const msrs)
 
 static void ppro_stop(struct op_msrs const * const msrs)
 {
-	unsigned int low, high;
+	u64 val;
 	int i;
 
 	if (!reset_value)
@@ -170,9 +170,9 @@ static void ppro_stop(struct op_msrs const * const msrs)
 	for (i = 0; i < num_counters; ++i) {
 		if (!reset_value[i])
 			continue;
-		rdmsr(msrs->controls[i].addr, low, high);
-		CTRL_SET_INACTIVE(low);
-		wrmsr(msrs->controls[i].addr, low, high);
+		rdmsrl(msrs->controls[i].addr, val);
+		val &= ~ARCH_PERFMON_EVENTSEL0_ENABLE;
+		wrmsrl(msrs->controls[i].addr, val);
 	}
 }
 
diff --git a/arch/x86/oprofile/op_x86_model.h b/arch/x86/oprofile/op_x86_model.h
index 3220d4ce632..1c4577795a9 100644
--- a/arch/x86/oprofile/op_x86_model.h
+++ b/arch/x86/oprofile/op_x86_model.h
@@ -17,8 +17,6 @@
 
 #define CTR_IS_RESERVED(msrs, c)	((msrs)->counters[(c)].addr ? 1 : 0)
 #define CTRL_IS_RESERVED(msrs, c)	((msrs)->controls[(c)].addr ? 1 : 0)
-#define CTRL_SET_ACTIVE(val)		((val) |= ARCH_PERFMON_EVENTSEL0_ENABLE)
-#define CTRL_SET_INACTIVE(val)		((val) &= ~ARCH_PERFMON_EVENTSEL0_ENABLE)
 
 struct op_saved_msr {
 	unsigned int high;
-- 
cgit v1.2.3


From 217d3cfb959756cb493fc03106c0253baa420ce8 Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Thu, 4 Jun 2009 02:36:44 +0200
Subject: x86/oprofile: replace CTR*_IS_RESERVED macros

The patch replaces all CTR*_IS_RESERVED macros.

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/op_model_amd.c  | 10 +++++-----
 arch/x86/oprofile/op_model_p4.c   | 10 +++++-----
 arch/x86/oprofile/op_model_ppro.c | 10 +++++-----
 arch/x86/oprofile/op_x86_model.h  |  3 ---
 4 files changed, 15 insertions(+), 18 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/op_model_amd.c b/arch/x86/oprofile/op_model_amd.c
index 4ac9d283e8d..c5c5eec2fa7 100644
--- a/arch/x86/oprofile/op_model_amd.c
+++ b/arch/x86/oprofile/op_model_amd.c
@@ -90,7 +90,7 @@ static void op_amd_setup_ctrs(struct op_x86_model_spec const *model,
 
 	/* clear all counters */
 	for (i = 0 ; i < NUM_CONTROLS; ++i) {
-		if (unlikely(!CTRL_IS_RESERVED(msrs, i)))
+		if (unlikely(!msrs->controls[i].addr))
 			continue;
 		rdmsrl(msrs->controls[i].addr, val);
 		val &= model->reserved;
@@ -99,14 +99,14 @@ static void op_amd_setup_ctrs(struct op_x86_model_spec const *model,
 
 	/* avoid a false detection of ctr overflows in NMI handler */
 	for (i = 0; i < NUM_COUNTERS; ++i) {
-		if (unlikely(!CTR_IS_RESERVED(msrs, i)))
+		if (unlikely(!msrs->counters[i].addr))
 			continue;
 		wrmsr(msrs->counters[i].addr, -1, -1);
 	}
 
 	/* enable active counters */
 	for (i = 0; i < NUM_COUNTERS; ++i) {
-		if ((counter_config[i].enabled) && (CTR_IS_RESERVED(msrs, i))) {
+		if (counter_config[i].enabled && msrs->counters[i].addr) {
 			reset_value[i] = counter_config[i].count;
 			wrmsr(msrs->counters[i].addr, -(unsigned int)counter_config[i].count, -1);
 			rdmsrl(msrs->controls[i].addr, val);
@@ -300,11 +300,11 @@ static void op_amd_shutdown(struct op_msrs const * const msrs)
 	int i;
 
 	for (i = 0 ; i < NUM_COUNTERS ; ++i) {
-		if (CTR_IS_RESERVED(msrs, i))
+		if (msrs->counters[i].addr)
 			release_perfctr_nmi(MSR_K7_PERFCTR0 + i);
 	}
 	for (i = 0 ; i < NUM_CONTROLS ; ++i) {
-		if (CTRL_IS_RESERVED(msrs, i))
+		if (msrs->controls[i].addr)
 			release_evntsel_nmi(MSR_K7_EVNTSEL0 + i);
 	}
 }
diff --git a/arch/x86/oprofile/op_model_p4.c b/arch/x86/oprofile/op_model_p4.c
index ac4ca28b9ed..9db0ca9af76 100644
--- a/arch/x86/oprofile/op_model_p4.c
+++ b/arch/x86/oprofile/op_model_p4.c
@@ -559,7 +559,7 @@ static void p4_setup_ctrs(struct op_x86_model_spec const *model,
 
 	/* clear the cccrs we will use */
 	for (i = 0 ; i < num_counters ; i++) {
-		if (unlikely(!CTRL_IS_RESERVED(msrs, i)))
+		if (unlikely(!msrs->controls[i].addr))
 			continue;
 		rdmsr(p4_counters[VIRT_CTR(stag, i)].cccr_address, low, high);
 		CCCR_CLEAR(low);
@@ -569,14 +569,14 @@ static void p4_setup_ctrs(struct op_x86_model_spec const *model,
 
 	/* clear all escrs (including those outside our concern) */
 	for (i = num_counters; i < num_controls; i++) {
-		if (unlikely(!CTRL_IS_RESERVED(msrs, i)))
+		if (unlikely(!msrs->controls[i].addr))
 			continue;
 		wrmsr(msrs->controls[i].addr, 0, 0);
 	}
 
 	/* setup all counters */
 	for (i = 0 ; i < num_counters ; ++i) {
-		if ((counter_config[i].enabled) && (CTRL_IS_RESERVED(msrs, i))) {
+		if (counter_config[i].enabled && msrs->controls[i].addr) {
 			reset_value[i] = counter_config[i].count;
 			pmc_setup_one_p4_counter(i);
 			wrmsr(p4_counters[VIRT_CTR(stag, i)].counter_address,
@@ -679,7 +679,7 @@ static void p4_shutdown(struct op_msrs const * const msrs)
 	int i;
 
 	for (i = 0 ; i < num_counters ; ++i) {
-		if (CTR_IS_RESERVED(msrs, i))
+		if (msrs->counters[i].addr)
 			release_perfctr_nmi(msrs->counters[i].addr);
 	}
 	/*
@@ -688,7 +688,7 @@ static void p4_shutdown(struct op_msrs const * const msrs)
 	 * This saves a few bits.
 	 */
 	for (i = num_counters ; i < num_controls ; ++i) {
-		if (CTRL_IS_RESERVED(msrs, i))
+		if (msrs->controls[i].addr)
 			release_evntsel_nmi(msrs->controls[i].addr);
 	}
 }
diff --git a/arch/x86/oprofile/op_model_ppro.c b/arch/x86/oprofile/op_model_ppro.c
index 566b43f0b6c..0a261a5c696 100644
--- a/arch/x86/oprofile/op_model_ppro.c
+++ b/arch/x86/oprofile/op_model_ppro.c
@@ -82,7 +82,7 @@ static void ppro_setup_ctrs(struct op_x86_model_spec const *model,
 
 	/* clear all counters */
 	for (i = 0 ; i < num_counters; ++i) {
-		if (unlikely(!CTRL_IS_RESERVED(msrs, i)))
+		if (unlikely(!msrs->controls[i].addr))
 			continue;
 		rdmsrl(msrs->controls[i].addr, val);
 		val &= model->reserved;
@@ -91,14 +91,14 @@ static void ppro_setup_ctrs(struct op_x86_model_spec const *model,
 
 	/* avoid a false detection of ctr overflows in NMI handler */
 	for (i = 0; i < num_counters; ++i) {
-		if (unlikely(!CTR_IS_RESERVED(msrs, i)))
+		if (unlikely(!msrs->counters[i].addr))
 			continue;
 		wrmsrl(msrs->counters[i].addr, -1LL);
 	}
 
 	/* enable active counters */
 	for (i = 0; i < num_counters; ++i) {
-		if ((counter_config[i].enabled) && (CTR_IS_RESERVED(msrs, i))) {
+		if (counter_config[i].enabled && msrs->counters[i].addr) {
 			reset_value[i] = counter_config[i].count;
 			wrmsrl(msrs->counters[i].addr, -reset_value[i]);
 			rdmsrl(msrs->controls[i].addr, val);
@@ -181,11 +181,11 @@ static void ppro_shutdown(struct op_msrs const * const msrs)
 	int i;
 
 	for (i = 0 ; i < num_counters ; ++i) {
-		if (CTR_IS_RESERVED(msrs, i))
+		if (msrs->counters[i].addr)
 			release_perfctr_nmi(MSR_P6_PERFCTR0 + i);
 	}
 	for (i = 0 ; i < num_counters ; ++i) {
-		if (CTRL_IS_RESERVED(msrs, i))
+		if (msrs->controls[i].addr)
 			release_evntsel_nmi(MSR_P6_EVNTSEL0 + i);
 	}
 	if (reset_value) {
diff --git a/arch/x86/oprofile/op_x86_model.h b/arch/x86/oprofile/op_x86_model.h
index 1c4577795a9..69f1eb46e1b 100644
--- a/arch/x86/oprofile/op_x86_model.h
+++ b/arch/x86/oprofile/op_x86_model.h
@@ -15,9 +15,6 @@
 #include <asm/types.h>
 #include <asm/intel_arch_perfmon.h>
 
-#define CTR_IS_RESERVED(msrs, c)	((msrs)->counters[(c)].addr ? 1 : 0)
-#define CTRL_IS_RESERVED(msrs, c)	((msrs)->controls[(c)].addr ? 1 : 0)
-
 struct op_saved_msr {
 	unsigned int high;
 	unsigned int low;
-- 
cgit v1.2.3


From bbc5986d2db427fdd61b6116ff8b9ed988e663a8 Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Mon, 25 May 2009 17:38:19 +0200
Subject: x86/oprofile: use 64 bit wrmsr functions

This patch replaces some wrmsr() functions with wrmsrl().

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/op_model_amd.c |  7 ++++---
 arch/x86/oprofile/op_model_p4.c  | 12 ++++++------
 2 files changed, 10 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/op_model_amd.c b/arch/x86/oprofile/op_model_amd.c
index c5c5eec2fa7..9bf90176241 100644
--- a/arch/x86/oprofile/op_model_amd.c
+++ b/arch/x86/oprofile/op_model_amd.c
@@ -101,14 +101,15 @@ static void op_amd_setup_ctrs(struct op_x86_model_spec const *model,
 	for (i = 0; i < NUM_COUNTERS; ++i) {
 		if (unlikely(!msrs->counters[i].addr))
 			continue;
-		wrmsr(msrs->counters[i].addr, -1, -1);
+		wrmsrl(msrs->counters[i].addr, -1LL);
 	}
 
 	/* enable active counters */
 	for (i = 0; i < NUM_COUNTERS; ++i) {
 		if (counter_config[i].enabled && msrs->counters[i].addr) {
 			reset_value[i] = counter_config[i].count;
-			wrmsr(msrs->counters[i].addr, -(unsigned int)counter_config[i].count, -1);
+			wrmsrl(msrs->counters[i].addr,
+			       -(s64)counter_config[i].count);
 			rdmsrl(msrs->controls[i].addr, val);
 			val &= model->reserved;
 			val |= op_x86_get_ctrl(model, &counter_config[i]);
@@ -251,7 +252,7 @@ static int op_amd_check_ctrs(struct pt_regs * const regs,
 		if (val & OP_CTR_OVERFLOW)
 			continue;
 		oprofile_add_sample(regs, i);
-		wrmsr(msrs->counters[i].addr, -(unsigned int)reset_value[i], -1);
+		wrmsrl(msrs->counters[i].addr, -(s64)reset_value[i]);
 	}
 
 	op_amd_handle_ibs(regs, msrs);
diff --git a/arch/x86/oprofile/op_model_p4.c b/arch/x86/oprofile/op_model_p4.c
index 9db0ca9af76..f01e53b118f 100644
--- a/arch/x86/oprofile/op_model_p4.c
+++ b/arch/x86/oprofile/op_model_p4.c
@@ -579,8 +579,8 @@ static void p4_setup_ctrs(struct op_x86_model_spec const *model,
 		if (counter_config[i].enabled && msrs->controls[i].addr) {
 			reset_value[i] = counter_config[i].count;
 			pmc_setup_one_p4_counter(i);
-			wrmsr(p4_counters[VIRT_CTR(stag, i)].counter_address,
-			      -(u32)counter_config[i].count, -1);
+			wrmsrl(p4_counters[VIRT_CTR(stag, i)].counter_address,
+			       -(s64)counter_config[i].count);
 		} else {
 			reset_value[i] = 0;
 		}
@@ -624,12 +624,12 @@ static int p4_check_ctrs(struct pt_regs * const regs,
 		rdmsr(p4_counters[real].counter_address, ctr, high);
 		if (CCCR_OVF_P(low) || !(ctr & OP_CTR_OVERFLOW)) {
 			oprofile_add_sample(regs, i);
-			wrmsr(p4_counters[real].counter_address,
-			      -(u32)reset_value[i], -1);
+			wrmsrl(p4_counters[real].counter_address,
+			       -(s64)reset_value[i]);
 			CCCR_CLEAR_OVF(low);
 			wrmsr(p4_counters[real].cccr_address, low, high);
-			wrmsr(p4_counters[real].counter_address,
-			      -(u32)reset_value[i], -1);
+			wrmsrl(p4_counters[real].counter_address,
+			       -(s64)reset_value[i]);
 		}
 	}
 
-- 
cgit v1.2.3


From 95e74e62c1540b1115fe8cec5b592f22960f2bb2 Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Wed, 3 Jun 2009 19:09:27 +0200
Subject: x86/oprofile: use 64 bit values to save MSR states

This patch removes struct op_saved_msr and replaces it by an u64
variable. This makes code easier and it is possible to use 64 bit MSR
functions.

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/nmi_int.c      | 28 ++++++++--------------------
 arch/x86/oprofile/op_x86_model.h |  9 ++-------
 2 files changed, 10 insertions(+), 27 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index 388ee15e0e4..3b84b789de0 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -78,19 +78,13 @@ static void nmi_cpu_save_registers(struct op_msrs *msrs)
 	unsigned int i;
 
 	for (i = 0; i < nr_ctrs; ++i) {
-		if (counters[i].addr) {
-			rdmsr(counters[i].addr,
-				counters[i].saved.low,
-				counters[i].saved.high);
-		}
+		if (counters[i].addr)
+			rdmsrl(counters[i].addr, counters[i].saved);
 	}
 
 	for (i = 0; i < nr_ctrls; ++i) {
-		if (controls[i].addr) {
-			rdmsr(controls[i].addr,
-				controls[i].saved.low,
-				controls[i].saved.high);
-		}
+		if (controls[i].addr)
+			rdmsrl(controls[i].addr, controls[i].saved);
 	}
 }
 
@@ -204,19 +198,13 @@ static void nmi_restore_registers(struct op_msrs *msrs)
 	unsigned int i;
 
 	for (i = 0; i < nr_ctrls; ++i) {
-		if (controls[i].addr) {
-			wrmsr(controls[i].addr,
-				controls[i].saved.low,
-				controls[i].saved.high);
-		}
+		if (controls[i].addr)
+			wrmsrl(controls[i].addr, controls[i].saved);
 	}
 
 	for (i = 0; i < nr_ctrs; ++i) {
-		if (counters[i].addr) {
-			wrmsr(counters[i].addr,
-				counters[i].saved.low,
-				counters[i].saved.high);
-		}
+		if (counters[i].addr)
+			wrmsrl(counters[i].addr, counters[i].saved);
 	}
 }
 
diff --git a/arch/x86/oprofile/op_x86_model.h b/arch/x86/oprofile/op_x86_model.h
index 69f1eb46e1b..fda52b4c1b9 100644
--- a/arch/x86/oprofile/op_x86_model.h
+++ b/arch/x86/oprofile/op_x86_model.h
@@ -15,14 +15,9 @@
 #include <asm/types.h>
 #include <asm/intel_arch_perfmon.h>
 
-struct op_saved_msr {
-	unsigned int high;
-	unsigned int low;
-};
-
 struct op_msr {
-	unsigned long addr;
-	struct op_saved_msr saved;
+	unsigned long	addr;
+	u64		saved;
 };
 
 struct op_msrs {
-- 
cgit v1.2.3


From 1a245c45343651a87ff63afc5ddeb8e24d731835 Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Fri, 5 Jun 2009 15:54:24 +0200
Subject: x86/oprofile: remove some local variables in MSR save/restore
 functions

The patch removes some local variables in these functions.

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/nmi_int.c | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index 3b84b789de0..80b63d5db50 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -71,18 +71,16 @@ static int profile_exceptions_notify(struct notifier_block *self,
 
 static void nmi_cpu_save_registers(struct op_msrs *msrs)
 {
-	unsigned int const nr_ctrs = model->num_counters;
-	unsigned int const nr_ctrls = model->num_controls;
 	struct op_msr *counters = msrs->counters;
 	struct op_msr *controls = msrs->controls;
 	unsigned int i;
 
-	for (i = 0; i < nr_ctrs; ++i) {
+	for (i = 0; i < model->num_counters; ++i) {
 		if (counters[i].addr)
 			rdmsrl(counters[i].addr, counters[i].saved);
 	}
 
-	for (i = 0; i < nr_ctrls; ++i) {
+	for (i = 0; i < model->num_controls; ++i) {
 		if (controls[i].addr)
 			rdmsrl(controls[i].addr, controls[i].saved);
 	}
@@ -191,18 +189,16 @@ static int nmi_setup(void)
 
 static void nmi_restore_registers(struct op_msrs *msrs)
 {
-	unsigned int const nr_ctrs = model->num_counters;
-	unsigned int const nr_ctrls = model->num_controls;
 	struct op_msr *counters = msrs->counters;
 	struct op_msr *controls = msrs->controls;
 	unsigned int i;
 
-	for (i = 0; i < nr_ctrls; ++i) {
+	for (i = 0; i < model->num_controls; ++i) {
 		if (controls[i].addr)
 			wrmsrl(controls[i].addr, controls[i].saved);
 	}
 
-	for (i = 0; i < nr_ctrs; ++i) {
+	for (i = 0; i < model->num_counters; ++i) {
 		if (counters[i].addr)
 			wrmsrl(counters[i].addr, counters[i].saved);
 	}
-- 
cgit v1.2.3


From c572ae4efd1b0a5cc76c5e6aae05c1b182b6a69c Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Wed, 3 Jun 2009 20:10:39 +0200
Subject: x86/oprofile: use 64 bit values in IBS functions

The IBS code internally uses 32 bit values (a low and a high value) to
represent a 64 bit value. This patch changes this and now 64 bit
values are used instead. 64 bit MSR functions can be used now.

No functional changes.

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/op_model_amd.c | 131 ++++++++++++++++++---------------------
 1 file changed, 61 insertions(+), 70 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/op_model_amd.c b/arch/x86/oprofile/op_model_amd.c
index 9bf90176241..6493ef7ae9a 100644
--- a/arch/x86/oprofile/op_model_amd.c
+++ b/arch/x86/oprofile/op_model_amd.c
@@ -35,16 +35,18 @@ static unsigned long reset_value[NUM_COUNTERS];
 #ifdef CONFIG_OPROFILE_IBS
 
 /* IbsFetchCtl bits/masks */
-#define IBS_FETCH_HIGH_VALID_BIT	(1UL << 17)	/* bit 49 */
-#define IBS_FETCH_HIGH_ENABLE		(1UL << 16)	/* bit 48 */
-#define IBS_FETCH_LOW_MAX_CNT_MASK	0x0000FFFFUL	/* MaxCnt mask */
+#define IBS_FETCH_RAND_EN		(1ULL<<57)
+#define IBS_FETCH_VAL			(1ULL<<49)
+#define IBS_FETCH_ENABLE		(1ULL<<48)
+#define IBS_FETCH_CNT_MASK		0xFFFF0000ULL
 
 /*IbsOpCtl bits */
-#define IBS_OP_LOW_VALID_BIT		(1ULL<<18)	/* bit 18 */
-#define IBS_OP_LOW_ENABLE		(1ULL<<17)	/* bit 17 */
+#define IBS_OP_CNT_CTL			(1ULL<<19)
+#define IBS_OP_VAL			(1ULL<<18)
+#define IBS_OP_ENABLE			(1ULL<<17)
 
-#define IBS_FETCH_SIZE	6
-#define IBS_OP_SIZE	12
+#define IBS_FETCH_SIZE			6
+#define IBS_OP_SIZE			12
 
 static int has_ibs;	/* AMD Family10h and later */
 
@@ -126,66 +128,63 @@ static inline int
 op_amd_handle_ibs(struct pt_regs * const regs,
 		  struct op_msrs const * const msrs)
 {
-	u32 low, high;
-	u64 msr;
+	u64 val, ctl;
 	struct op_entry entry;
 
 	if (!has_ibs)
 		return 1;
 
 	if (ibs_config.fetch_enabled) {
-		rdmsr(MSR_AMD64_IBSFETCHCTL, low, high);
-		if (high & IBS_FETCH_HIGH_VALID_BIT) {
-			rdmsrl(MSR_AMD64_IBSFETCHLINAD, msr);
-			oprofile_write_reserve(&entry, regs, msr,
+		rdmsrl(MSR_AMD64_IBSFETCHCTL, ctl);
+		if (ctl & IBS_FETCH_VAL) {
+			rdmsrl(MSR_AMD64_IBSFETCHLINAD, val);
+			oprofile_write_reserve(&entry, regs, val,
 					       IBS_FETCH_CODE, IBS_FETCH_SIZE);
-			oprofile_add_data(&entry, (u32)msr);
-			oprofile_add_data(&entry, (u32)(msr >> 32));
-			oprofile_add_data(&entry, low);
-			oprofile_add_data(&entry, high);
-			rdmsrl(MSR_AMD64_IBSFETCHPHYSAD, msr);
-			oprofile_add_data(&entry, (u32)msr);
-			oprofile_add_data(&entry, (u32)(msr >> 32));
+			oprofile_add_data(&entry, (u32)val);
+			oprofile_add_data(&entry, (u32)(val >> 32));
+			oprofile_add_data(&entry, (u32)ctl);
+			oprofile_add_data(&entry, (u32)(ctl >> 32));
+			rdmsrl(MSR_AMD64_IBSFETCHPHYSAD, val);
+			oprofile_add_data(&entry, (u32)val);
+			oprofile_add_data(&entry, (u32)(val >> 32));
 			oprofile_write_commit(&entry);
 
 			/* reenable the IRQ */
-			high &= ~IBS_FETCH_HIGH_VALID_BIT;
-			high |= IBS_FETCH_HIGH_ENABLE;
-			low &= IBS_FETCH_LOW_MAX_CNT_MASK;
-			wrmsr(MSR_AMD64_IBSFETCHCTL, low, high);
+			ctl &= ~(IBS_FETCH_VAL | IBS_FETCH_CNT_MASK);
+			ctl |= IBS_FETCH_ENABLE;
+			wrmsrl(MSR_AMD64_IBSFETCHCTL, ctl);
 		}
 	}
 
 	if (ibs_config.op_enabled) {
-		rdmsr(MSR_AMD64_IBSOPCTL, low, high);
-		if (low & IBS_OP_LOW_VALID_BIT) {
-			rdmsrl(MSR_AMD64_IBSOPRIP, msr);
-			oprofile_write_reserve(&entry, regs, msr,
+		rdmsrl(MSR_AMD64_IBSOPCTL, ctl);
+		if (ctl & IBS_OP_VAL) {
+			rdmsrl(MSR_AMD64_IBSOPRIP, val);
+			oprofile_write_reserve(&entry, regs, val,
 					       IBS_OP_CODE, IBS_OP_SIZE);
-			oprofile_add_data(&entry, (u32)msr);
-			oprofile_add_data(&entry, (u32)(msr >> 32));
-			rdmsrl(MSR_AMD64_IBSOPDATA, msr);
-			oprofile_add_data(&entry, (u32)msr);
-			oprofile_add_data(&entry, (u32)(msr >> 32));
-			rdmsrl(MSR_AMD64_IBSOPDATA2, msr);
-			oprofile_add_data(&entry, (u32)msr);
-			oprofile_add_data(&entry, (u32)(msr >> 32));
-			rdmsrl(MSR_AMD64_IBSOPDATA3, msr);
-			oprofile_add_data(&entry, (u32)msr);
-			oprofile_add_data(&entry, (u32)(msr >> 32));
-			rdmsrl(MSR_AMD64_IBSDCLINAD, msr);
-			oprofile_add_data(&entry, (u32)msr);
-			oprofile_add_data(&entry, (u32)(msr >> 32));
-			rdmsrl(MSR_AMD64_IBSDCPHYSAD, msr);
-			oprofile_add_data(&entry, (u32)msr);
-			oprofile_add_data(&entry, (u32)(msr >> 32));
+			oprofile_add_data(&entry, (u32)val);
+			oprofile_add_data(&entry, (u32)(val >> 32));
+			rdmsrl(MSR_AMD64_IBSOPDATA, val);
+			oprofile_add_data(&entry, (u32)val);
+			oprofile_add_data(&entry, (u32)(val >> 32));
+			rdmsrl(MSR_AMD64_IBSOPDATA2, val);
+			oprofile_add_data(&entry, (u32)val);
+			oprofile_add_data(&entry, (u32)(val >> 32));
+			rdmsrl(MSR_AMD64_IBSOPDATA3, val);
+			oprofile_add_data(&entry, (u32)val);
+			oprofile_add_data(&entry, (u32)(val >> 32));
+			rdmsrl(MSR_AMD64_IBSDCLINAD, val);
+			oprofile_add_data(&entry, (u32)val);
+			oprofile_add_data(&entry, (u32)(val >> 32));
+			rdmsrl(MSR_AMD64_IBSDCPHYSAD, val);
+			oprofile_add_data(&entry, (u32)val);
+			oprofile_add_data(&entry, (u32)(val >> 32));
 			oprofile_write_commit(&entry);
 
 			/* reenable the IRQ */
-			high = 0;
-			low &= ~IBS_OP_LOW_VALID_BIT;
-			low |= IBS_OP_LOW_ENABLE;
-			wrmsr(MSR_AMD64_IBSOPCTL, low, high);
+			ctl &= ~IBS_OP_VAL & 0xFFFFFFFF;
+			ctl |= IBS_OP_ENABLE;
+			wrmsrl(MSR_AMD64_IBSOPCTL, ctl);
 		}
 	}
 
@@ -194,39 +193,31 @@ op_amd_handle_ibs(struct pt_regs * const regs,
 
 static inline void op_amd_start_ibs(void)
 {
-	unsigned int low, high;
+	u64 val;
 	if (has_ibs && ibs_config.fetch_enabled) {
-		low = (ibs_config.max_cnt_fetch >> 4) & 0xFFFF;
-		high = ((ibs_config.rand_en & 0x1) << 25) /* bit 57 */
-			+ IBS_FETCH_HIGH_ENABLE;
-		wrmsr(MSR_AMD64_IBSFETCHCTL, low, high);
+		val = (ibs_config.max_cnt_fetch >> 4) & 0xFFFF;
+		val |= ibs_config.rand_en ? IBS_FETCH_RAND_EN : 0;
+		val |= IBS_FETCH_ENABLE;
+		wrmsrl(MSR_AMD64_IBSFETCHCTL, val);
 	}
 
 	if (has_ibs && ibs_config.op_enabled) {
-		low = ((ibs_config.max_cnt_op >> 4) & 0xFFFF)
-			+ ((ibs_config.dispatched_ops & 0x1) << 19) /* bit 19 */
-			+ IBS_OP_LOW_ENABLE;
-		high = 0;
-		wrmsr(MSR_AMD64_IBSOPCTL, low, high);
+		val = (ibs_config.max_cnt_op >> 4) & 0xFFFF;
+		val |= ibs_config.dispatched_ops ? IBS_OP_CNT_CTL : 0;
+		val |= IBS_OP_ENABLE;
+		wrmsrl(MSR_AMD64_IBSOPCTL, val);
 	}
 }
 
 static void op_amd_stop_ibs(void)
 {
-	unsigned int low, high;
-	if (has_ibs && ibs_config.fetch_enabled) {
+	if (has_ibs && ibs_config.fetch_enabled)
 		/* clear max count and enable */
-		low = 0;
-		high = 0;
-		wrmsr(MSR_AMD64_IBSFETCHCTL, low, high);
-	}
+		wrmsrl(MSR_AMD64_IBSFETCHCTL, 0);
 
-	if (has_ibs && ibs_config.op_enabled) {
+	if (has_ibs && ibs_config.op_enabled)
 		/* clear max count and enable */
-		low = 0;
-		high = 0;
-		wrmsr(MSR_AMD64_IBSOPCTL, low, high);
-	}
+		wrmsrl(MSR_AMD64_IBSOPCTL, 0);
 }
 
 #else
-- 
cgit v1.2.3


From 51563a0e5650d0d76539625388d72d62b34c726e Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Wed, 3 Jun 2009 20:54:56 +0200
Subject: x86/oprofile: introduce oprofile_add_data64()

The IBS implemention writes 64 bit register values to the cpu buffer
by writing two 32 values using oprofile_add_data(). This patch
introduces oprofile_add_data64() to write a single 64 bit value to the
buffer.

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/op_model_amd.c | 27 +++++++++------------------
 1 file changed, 9 insertions(+), 18 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/op_model_amd.c b/arch/x86/oprofile/op_model_amd.c
index 6493ef7ae9a..cc930467575 100644
--- a/arch/x86/oprofile/op_model_amd.c
+++ b/arch/x86/oprofile/op_model_amd.c
@@ -140,13 +140,10 @@ op_amd_handle_ibs(struct pt_regs * const regs,
 			rdmsrl(MSR_AMD64_IBSFETCHLINAD, val);
 			oprofile_write_reserve(&entry, regs, val,
 					       IBS_FETCH_CODE, IBS_FETCH_SIZE);
-			oprofile_add_data(&entry, (u32)val);
-			oprofile_add_data(&entry, (u32)(val >> 32));
-			oprofile_add_data(&entry, (u32)ctl);
-			oprofile_add_data(&entry, (u32)(ctl >> 32));
+			oprofile_add_data64(&entry, val);
+			oprofile_add_data64(&entry, ctl);
 			rdmsrl(MSR_AMD64_IBSFETCHPHYSAD, val);
-			oprofile_add_data(&entry, (u32)val);
-			oprofile_add_data(&entry, (u32)(val >> 32));
+			oprofile_add_data64(&entry, val);
 			oprofile_write_commit(&entry);
 
 			/* reenable the IRQ */
@@ -162,23 +159,17 @@ op_amd_handle_ibs(struct pt_regs * const regs,
 			rdmsrl(MSR_AMD64_IBSOPRIP, val);
 			oprofile_write_reserve(&entry, regs, val,
 					       IBS_OP_CODE, IBS_OP_SIZE);
-			oprofile_add_data(&entry, (u32)val);
-			oprofile_add_data(&entry, (u32)(val >> 32));
+			oprofile_add_data64(&entry, val);
 			rdmsrl(MSR_AMD64_IBSOPDATA, val);
-			oprofile_add_data(&entry, (u32)val);
-			oprofile_add_data(&entry, (u32)(val >> 32));
+			oprofile_add_data64(&entry, val);
 			rdmsrl(MSR_AMD64_IBSOPDATA2, val);
-			oprofile_add_data(&entry, (u32)val);
-			oprofile_add_data(&entry, (u32)(val >> 32));
+			oprofile_add_data64(&entry, val);
 			rdmsrl(MSR_AMD64_IBSOPDATA3, val);
-			oprofile_add_data(&entry, (u32)val);
-			oprofile_add_data(&entry, (u32)(val >> 32));
+			oprofile_add_data64(&entry, val);
 			rdmsrl(MSR_AMD64_IBSDCLINAD, val);
-			oprofile_add_data(&entry, (u32)val);
-			oprofile_add_data(&entry, (u32)(val >> 32));
+			oprofile_add_data64(&entry, val);
 			rdmsrl(MSR_AMD64_IBSDCPHYSAD, val);
-			oprofile_add_data(&entry, (u32)val);
-			oprofile_add_data(&entry, (u32)(val >> 32));
+			oprofile_add_data64(&entry, val);
 			oprofile_write_commit(&entry);
 
 			/* reenable the IRQ */
-- 
cgit v1.2.3


From 802070f5474af1a49435a9528aede47bb18abd47 Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Fri, 12 Jun 2009 18:32:07 +0200
Subject: x86/oprofile: fix initialization of arch_perfmon for core_i7

Commit:

 e419294 x86/oprofile: moving arch_perfmon counter setup to op_x86_model_spec.init

introduced a bug in the initialization of core_i7 leading to the
incorrect model setup to &op_ppro_spec. This patch fixes this.

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/nmi_int.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index 7826dfcc842..28ee490c1b8 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -406,6 +406,7 @@ module_param_call(cpu_type, force_cpu_type, NULL, NULL, 0);
 static int __init ppro_init(char **cpu_type)
 {
 	__u8 cpu_model = boot_cpu_data.x86_model;
+	struct op_x86_model_spec const *spec = &op_ppro_spec;	/* default */
 
 	if (force_arch_perfmon && cpu_has_arch_perfmon)
 		return 0;
@@ -432,7 +433,7 @@ static int __init ppro_init(char **cpu_type)
 		*cpu_type = "i386/core_2";
 		break;
 	case 26:
-		model = &op_arch_perfmon_spec;
+		spec = &op_arch_perfmon_spec;
 		*cpu_type = "i386/core_i7";
 		break;
 	case 28:
@@ -443,7 +444,7 @@ static int __init ppro_init(char **cpu_type)
 		return 0;
 	}
 
-	model = &op_ppro_spec;
+	model = spec;
 	return 1;
 }
 
-- 
cgit v1.2.3


From c64b04fe6e0cb7c78e01751a44ef56cf20344e87 Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinder@kernel.org>
Date: Sun, 14 Jun 2009 00:59:50 +0530
Subject: x86, cpu: cpu/proc.c display cache alignment and address sizes for 32
 bit

32 bits can also access x86_cache_alignment, x86_phys_bits and
x86_virt_bits, make them available to user space just as on 64 bits.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
LKML-Reference: <1244921390.11733.30.camel@ht.satnam>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/kernel/cpu/proc.c | 2 --
 1 file changed, 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/proc.c b/arch/x86/kernel/cpu/proc.c
index d5e30397246..f82706a3901 100644
--- a/arch/x86/kernel/cpu/proc.c
+++ b/arch/x86/kernel/cpu/proc.c
@@ -116,11 +116,9 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 		seq_printf(m, "TLB size\t: %d 4K pages\n", c->x86_tlbsize);
 #endif
 	seq_printf(m, "clflush size\t: %u\n", c->x86_clflush_size);
-#ifdef CONFIG_X86_64
 	seq_printf(m, "cache_alignment\t: %d\n", c->x86_cache_alignment);
 	seq_printf(m, "address sizes\t: %u bits physical, %u bits virtual\n",
 		   c->x86_phys_bits, c->x86_virt_bits);
-#endif
 
 	seq_printf(m, "power management:");
 	for (i = 0; i < 32; i++) {
-- 
cgit v1.2.3


From ac5672f82c39ff2f8dce81bf3e68b1dfc41f366f Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Tue, 14 Apr 2009 14:29:44 -0700
Subject: x86/paravirt: split paravirt definitions into paravirt_types.h

Split the monolithic asm/paravirt.h into separate paravirt.h (inlines and other
"active" definitions), and paravirt_types.h (types, constants and other "passive"
definitions).  This makes it easier to use the type/constant definitions without
pulling in everything else and causing circular dependency problems.

[ Impact: cleanup ]

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/include/asm/paravirt.h       | 711 +--------------------------------
 arch/x86/include/asm/paravirt_types.h | 720 ++++++++++++++++++++++++++++++++++
 2 files changed, 721 insertions(+), 710 deletions(-)
 create mode 100644 arch/x86/include/asm/paravirt_types.h

(limited to 'arch')

diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h
index 4fb37c8a083..6a07af432c8 100644
--- a/arch/x86/include/asm/paravirt.h
+++ b/arch/x86/include/asm/paravirt.h
@@ -7,689 +7,11 @@
 #include <asm/pgtable_types.h>
 #include <asm/asm.h>
 
-/* Bitmask of what can be clobbered: usually at least eax. */
-#define CLBR_NONE 0
-#define CLBR_EAX  (1 << 0)
-#define CLBR_ECX  (1 << 1)
-#define CLBR_EDX  (1 << 2)
-#define CLBR_EDI  (1 << 3)
-
-#ifdef CONFIG_X86_32
-/* CLBR_ANY should match all regs platform has. For i386, that's just it */
-#define CLBR_ANY  ((1 << 4) - 1)
-
-#define CLBR_ARG_REGS	(CLBR_EAX | CLBR_EDX | CLBR_ECX)
-#define CLBR_RET_REG	(CLBR_EAX | CLBR_EDX)
-#define CLBR_SCRATCH	(0)
-#else
-#define CLBR_RAX  CLBR_EAX
-#define CLBR_RCX  CLBR_ECX
-#define CLBR_RDX  CLBR_EDX
-#define CLBR_RDI  CLBR_EDI
-#define CLBR_RSI  (1 << 4)
-#define CLBR_R8   (1 << 5)
-#define CLBR_R9   (1 << 6)
-#define CLBR_R10  (1 << 7)
-#define CLBR_R11  (1 << 8)
-
-#define CLBR_ANY  ((1 << 9) - 1)
-
-#define CLBR_ARG_REGS	(CLBR_RDI | CLBR_RSI | CLBR_RDX | \
-			 CLBR_RCX | CLBR_R8 | CLBR_R9)
-#define CLBR_RET_REG	(CLBR_RAX)
-#define CLBR_SCRATCH	(CLBR_R10 | CLBR_R11)
-
-#include <asm/desc_defs.h>
-#endif /* X86_64 */
-
-#define CLBR_CALLEE_SAVE ((CLBR_ARG_REGS | CLBR_SCRATCH) & ~CLBR_RET_REG)
+#include <asm/paravirt_types.h>
 
 #ifndef __ASSEMBLY__
 #include <linux/types.h>
 #include <linux/cpumask.h>
-#include <asm/kmap_types.h>
-#include <asm/desc_defs.h>
-
-struct page;
-struct thread_struct;
-struct desc_ptr;
-struct tss_struct;
-struct mm_struct;
-struct desc_struct;
-struct task_struct;
-
-/*
- * Wrapper type for pointers to code which uses the non-standard
- * calling convention.  See PV_CALL_SAVE_REGS_THUNK below.
- */
-struct paravirt_callee_save {
-	void *func;
-};
-
-/* general info */
-struct pv_info {
-	unsigned int kernel_rpl;
-	int shared_kernel_pmd;
-	int paravirt_enabled;
-	const char *name;
-};
-
-struct pv_init_ops {
-	/*
-	 * Patch may replace one of the defined code sequences with
-	 * arbitrary code, subject to the same register constraints.
-	 * This generally means the code is not free to clobber any
-	 * registers other than EAX.  The patch function should return
-	 * the number of bytes of code generated, as we nop pad the
-	 * rest in generic code.
-	 */
-	unsigned (*patch)(u8 type, u16 clobber, void *insnbuf,
-			  unsigned long addr, unsigned len);
-
-	/* Basic arch-specific setup */
-	void (*arch_setup)(void);
-	char *(*memory_setup)(void);
-	void (*post_allocator_init)(void);
-
-	/* Print a banner to identify the environment */
-	void (*banner)(void);
-};
-
-
-struct pv_lazy_ops {
-	/* Set deferred update mode, used for batching operations. */
-	void (*enter)(void);
-	void (*leave)(void);
-};
-
-struct pv_time_ops {
-	void (*time_init)(void);
-
-	/* Set and set time of day */
-	unsigned long (*get_wallclock)(void);
-	int (*set_wallclock)(unsigned long);
-
-	unsigned long long (*sched_clock)(void);
-	unsigned long (*get_tsc_khz)(void);
-};
-
-struct pv_cpu_ops {
-	/* hooks for various privileged instructions */
-	unsigned long (*get_debugreg)(int regno);
-	void (*set_debugreg)(int regno, unsigned long value);
-
-	void (*clts)(void);
-
-	unsigned long (*read_cr0)(void);
-	void (*write_cr0)(unsigned long);
-
-	unsigned long (*read_cr4_safe)(void);
-	unsigned long (*read_cr4)(void);
-	void (*write_cr4)(unsigned long);
-
-#ifdef CONFIG_X86_64
-	unsigned long (*read_cr8)(void);
-	void (*write_cr8)(unsigned long);
-#endif
-
-	/* Segment descriptor handling */
-	void (*load_tr_desc)(void);
-	void (*load_gdt)(const struct desc_ptr *);
-	void (*load_idt)(const struct desc_ptr *);
-	void (*store_gdt)(struct desc_ptr *);
-	void (*store_idt)(struct desc_ptr *);
-	void (*set_ldt)(const void *desc, unsigned entries);
-	unsigned long (*store_tr)(void);
-	void (*load_tls)(struct thread_struct *t, unsigned int cpu);
-#ifdef CONFIG_X86_64
-	void (*load_gs_index)(unsigned int idx);
-#endif
-	void (*write_ldt_entry)(struct desc_struct *ldt, int entrynum,
-				const void *desc);
-	void (*write_gdt_entry)(struct desc_struct *,
-				int entrynum, const void *desc, int size);
-	void (*write_idt_entry)(gate_desc *,
-				int entrynum, const gate_desc *gate);
-	void (*alloc_ldt)(struct desc_struct *ldt, unsigned entries);
-	void (*free_ldt)(struct desc_struct *ldt, unsigned entries);
-
-	void (*load_sp0)(struct tss_struct *tss, struct thread_struct *t);
-
-	void (*set_iopl_mask)(unsigned mask);
-
-	void (*wbinvd)(void);
-	void (*io_delay)(void);
-
-	/* cpuid emulation, mostly so that caps bits can be disabled */
-	void (*cpuid)(unsigned int *eax, unsigned int *ebx,
-		      unsigned int *ecx, unsigned int *edx);
-
-	/* MSR, PMC and TSR operations.
-	   err = 0/-EFAULT.  wrmsr returns 0/-EFAULT. */
-	u64 (*read_msr_amd)(unsigned int msr, int *err);
-	u64 (*read_msr)(unsigned int msr, int *err);
-	int (*write_msr)(unsigned int msr, unsigned low, unsigned high);
-
-	u64 (*read_tsc)(void);
-	u64 (*read_pmc)(int counter);
-	unsigned long long (*read_tscp)(unsigned int *aux);
-
-	/*
-	 * Atomically enable interrupts and return to userspace.  This
-	 * is only ever used to return to 32-bit processes; in a
-	 * 64-bit kernel, it's used for 32-on-64 compat processes, but
-	 * never native 64-bit processes.  (Jump, not call.)
-	 */
-	void (*irq_enable_sysexit)(void);
-
-	/*
-	 * Switch to usermode gs and return to 64-bit usermode using
-	 * sysret.  Only used in 64-bit kernels to return to 64-bit
-	 * processes.  Usermode register state, including %rsp, must
-	 * already be restored.
-	 */
-	void (*usergs_sysret64)(void);
-
-	/*
-	 * Switch to usermode gs and return to 32-bit usermode using
-	 * sysret.  Used to return to 32-on-64 compat processes.
-	 * Other usermode register state, including %esp, must already
-	 * be restored.
-	 */
-	void (*usergs_sysret32)(void);
-
-	/* Normal iret.  Jump to this with the standard iret stack
-	   frame set up. */
-	void (*iret)(void);
-
-	void (*swapgs)(void);
-
-	void (*start_context_switch)(struct task_struct *prev);
-	void (*end_context_switch)(struct task_struct *next);
-};
-
-struct pv_irq_ops {
-	void (*init_IRQ)(void);
-
-	/*
-	 * Get/set interrupt state.  save_fl and restore_fl are only
-	 * expected to use X86_EFLAGS_IF; all other bits
-	 * returned from save_fl are undefined, and may be ignored by
-	 * restore_fl.
-	 *
-	 * NOTE: These functions callers expect the callee to preserve
-	 * more registers than the standard C calling convention.
-	 */
-	struct paravirt_callee_save save_fl;
-	struct paravirt_callee_save restore_fl;
-	struct paravirt_callee_save irq_disable;
-	struct paravirt_callee_save irq_enable;
-
-	void (*safe_halt)(void);
-	void (*halt)(void);
-
-#ifdef CONFIG_X86_64
-	void (*adjust_exception_frame)(void);
-#endif
-};
-
-struct pv_apic_ops {
-#ifdef CONFIG_X86_LOCAL_APIC
-	void (*setup_boot_clock)(void);
-	void (*setup_secondary_clock)(void);
-
-	void (*startup_ipi_hook)(int phys_apicid,
-				 unsigned long start_eip,
-				 unsigned long start_esp);
-#endif
-};
-
-struct pv_mmu_ops {
-	/*
-	 * Called before/after init_mm pagetable setup. setup_start
-	 * may reset %cr3, and may pre-install parts of the pagetable;
-	 * pagetable setup is expected to preserve any existing
-	 * mapping.
-	 */
-	void (*pagetable_setup_start)(pgd_t *pgd_base);
-	void (*pagetable_setup_done)(pgd_t *pgd_base);
-
-	unsigned long (*read_cr2)(void);
-	void (*write_cr2)(unsigned long);
-
-	unsigned long (*read_cr3)(void);
-	void (*write_cr3)(unsigned long);
-
-	/*
-	 * Hooks for intercepting the creation/use/destruction of an
-	 * mm_struct.
-	 */
-	void (*activate_mm)(struct mm_struct *prev,
-			    struct mm_struct *next);
-	void (*dup_mmap)(struct mm_struct *oldmm,
-			 struct mm_struct *mm);
-	void (*exit_mmap)(struct mm_struct *mm);
-
-
-	/* TLB operations */
-	void (*flush_tlb_user)(void);
-	void (*flush_tlb_kernel)(void);
-	void (*flush_tlb_single)(unsigned long addr);
-	void (*flush_tlb_others)(const struct cpumask *cpus,
-				 struct mm_struct *mm,
-				 unsigned long va);
-
-	/* Hooks for allocating and freeing a pagetable top-level */
-	int  (*pgd_alloc)(struct mm_struct *mm);
-	void (*pgd_free)(struct mm_struct *mm, pgd_t *pgd);
-
-	/*
-	 * Hooks for allocating/releasing pagetable pages when they're
-	 * attached to a pagetable
-	 */
-	void (*alloc_pte)(struct mm_struct *mm, unsigned long pfn);
-	void (*alloc_pmd)(struct mm_struct *mm, unsigned long pfn);
-	void (*alloc_pmd_clone)(unsigned long pfn, unsigned long clonepfn, unsigned long start, unsigned long count);
-	void (*alloc_pud)(struct mm_struct *mm, unsigned long pfn);
-	void (*release_pte)(unsigned long pfn);
-	void (*release_pmd)(unsigned long pfn);
-	void (*release_pud)(unsigned long pfn);
-
-	/* Pagetable manipulation functions */
-	void (*set_pte)(pte_t *ptep, pte_t pteval);
-	void (*set_pte_at)(struct mm_struct *mm, unsigned long addr,
-			   pte_t *ptep, pte_t pteval);
-	void (*set_pmd)(pmd_t *pmdp, pmd_t pmdval);
-	void (*pte_update)(struct mm_struct *mm, unsigned long addr,
-			   pte_t *ptep);
-	void (*pte_update_defer)(struct mm_struct *mm,
-				 unsigned long addr, pte_t *ptep);
-
-	pte_t (*ptep_modify_prot_start)(struct mm_struct *mm, unsigned long addr,
-					pte_t *ptep);
-	void (*ptep_modify_prot_commit)(struct mm_struct *mm, unsigned long addr,
-					pte_t *ptep, pte_t pte);
-
-	struct paravirt_callee_save pte_val;
-	struct paravirt_callee_save make_pte;
-
-	struct paravirt_callee_save pgd_val;
-	struct paravirt_callee_save make_pgd;
-
-#if PAGETABLE_LEVELS >= 3
-#ifdef CONFIG_X86_PAE
-	void (*set_pte_atomic)(pte_t *ptep, pte_t pteval);
-	void (*pte_clear)(struct mm_struct *mm, unsigned long addr,
-			  pte_t *ptep);
-	void (*pmd_clear)(pmd_t *pmdp);
-
-#endif	/* CONFIG_X86_PAE */
-
-	void (*set_pud)(pud_t *pudp, pud_t pudval);
-
-	struct paravirt_callee_save pmd_val;
-	struct paravirt_callee_save make_pmd;
-
-#if PAGETABLE_LEVELS == 4
-	struct paravirt_callee_save pud_val;
-	struct paravirt_callee_save make_pud;
-
-	void (*set_pgd)(pgd_t *pudp, pgd_t pgdval);
-#endif	/* PAGETABLE_LEVELS == 4 */
-#endif	/* PAGETABLE_LEVELS >= 3 */
-
-#ifdef CONFIG_HIGHPTE
-	void *(*kmap_atomic_pte)(struct page *page, enum km_type type);
-#endif
-
-	struct pv_lazy_ops lazy_mode;
-
-	/* dom0 ops */
-
-	/* Sometimes the physical address is a pfn, and sometimes its
-	   an mfn.  We can tell which is which from the index. */
-	void (*set_fixmap)(unsigned /* enum fixed_addresses */ idx,
-			   phys_addr_t phys, pgprot_t flags);
-};
-
-struct raw_spinlock;
-struct pv_lock_ops {
-	int (*spin_is_locked)(struct raw_spinlock *lock);
-	int (*spin_is_contended)(struct raw_spinlock *lock);
-	void (*spin_lock)(struct raw_spinlock *lock);
-	void (*spin_lock_flags)(struct raw_spinlock *lock, unsigned long flags);
-	int (*spin_trylock)(struct raw_spinlock *lock);
-	void (*spin_unlock)(struct raw_spinlock *lock);
-};
-
-/* This contains all the paravirt structures: we get a convenient
- * number for each function using the offset which we use to indicate
- * what to patch. */
-struct paravirt_patch_template {
-	struct pv_init_ops pv_init_ops;
-	struct pv_time_ops pv_time_ops;
-	struct pv_cpu_ops pv_cpu_ops;
-	struct pv_irq_ops pv_irq_ops;
-	struct pv_apic_ops pv_apic_ops;
-	struct pv_mmu_ops pv_mmu_ops;
-	struct pv_lock_ops pv_lock_ops;
-};
-
-extern struct pv_info pv_info;
-extern struct pv_init_ops pv_init_ops;
-extern struct pv_time_ops pv_time_ops;
-extern struct pv_cpu_ops pv_cpu_ops;
-extern struct pv_irq_ops pv_irq_ops;
-extern struct pv_apic_ops pv_apic_ops;
-extern struct pv_mmu_ops pv_mmu_ops;
-extern struct pv_lock_ops pv_lock_ops;
-
-#define PARAVIRT_PATCH(x)					\
-	(offsetof(struct paravirt_patch_template, x) / sizeof(void *))
-
-#define paravirt_type(op)				\
-	[paravirt_typenum] "i" (PARAVIRT_PATCH(op)),	\
-	[paravirt_opptr] "i" (&(op))
-#define paravirt_clobber(clobber)		\
-	[paravirt_clobber] "i" (clobber)
-
-/*
- * Generate some code, and mark it as patchable by the
- * apply_paravirt() alternate instruction patcher.
- */
-#define _paravirt_alt(insn_string, type, clobber)	\
-	"771:\n\t" insn_string "\n" "772:\n"		\
-	".pushsection .parainstructions,\"a\"\n"	\
-	_ASM_ALIGN "\n"					\
-	_ASM_PTR " 771b\n"				\
-	"  .byte " type "\n"				\
-	"  .byte 772b-771b\n"				\
-	"  .short " clobber "\n"			\
-	".popsection\n"
-
-/* Generate patchable code, with the default asm parameters. */
-#define paravirt_alt(insn_string)					\
-	_paravirt_alt(insn_string, "%c[paravirt_typenum]", "%c[paravirt_clobber]")
-
-/* Simple instruction patching code. */
-#define DEF_NATIVE(ops, name, code) 					\
-	extern const char start_##ops##_##name[], end_##ops##_##name[];	\
-	asm("start_" #ops "_" #name ": " code "; end_" #ops "_" #name ":")
-
-unsigned paravirt_patch_nop(void);
-unsigned paravirt_patch_ident_32(void *insnbuf, unsigned len);
-unsigned paravirt_patch_ident_64(void *insnbuf, unsigned len);
-unsigned paravirt_patch_ignore(unsigned len);
-unsigned paravirt_patch_call(void *insnbuf,
-			     const void *target, u16 tgt_clobbers,
-			     unsigned long addr, u16 site_clobbers,
-			     unsigned len);
-unsigned paravirt_patch_jmp(void *insnbuf, const void *target,
-			    unsigned long addr, unsigned len);
-unsigned paravirt_patch_default(u8 type, u16 clobbers, void *insnbuf,
-				unsigned long addr, unsigned len);
-
-unsigned paravirt_patch_insns(void *insnbuf, unsigned len,
-			      const char *start, const char *end);
-
-unsigned native_patch(u8 type, u16 clobbers, void *ibuf,
-		      unsigned long addr, unsigned len);
-
-int paravirt_disable_iospace(void);
-
-/*
- * This generates an indirect call based on the operation type number.
- * The type number, computed in PARAVIRT_PATCH, is derived from the
- * offset into the paravirt_patch_template structure, and can therefore be
- * freely converted back into a structure offset.
- */
-#define PARAVIRT_CALL	"call *%c[paravirt_opptr];"
-
-/*
- * These macros are intended to wrap calls through one of the paravirt
- * ops structs, so that they can be later identified and patched at
- * runtime.
- *
- * Normally, a call to a pv_op function is a simple indirect call:
- * (pv_op_struct.operations)(args...).
- *
- * Unfortunately, this is a relatively slow operation for modern CPUs,
- * because it cannot necessarily determine what the destination
- * address is.  In this case, the address is a runtime constant, so at
- * the very least we can patch the call to e a simple direct call, or
- * ideally, patch an inline implementation into the callsite.  (Direct
- * calls are essentially free, because the call and return addresses
- * are completely predictable.)
- *
- * For i386, these macros rely on the standard gcc "regparm(3)" calling
- * convention, in which the first three arguments are placed in %eax,
- * %edx, %ecx (in that order), and the remaining arguments are placed
- * on the stack.  All caller-save registers (eax,edx,ecx) are expected
- * to be modified (either clobbered or used for return values).
- * X86_64, on the other hand, already specifies a register-based calling
- * conventions, returning at %rax, with parameteres going on %rdi, %rsi,
- * %rdx, and %rcx. Note that for this reason, x86_64 does not need any
- * special handling for dealing with 4 arguments, unlike i386.
- * However, x86_64 also have to clobber all caller saved registers, which
- * unfortunately, are quite a bit (r8 - r11)
- *
- * The call instruction itself is marked by placing its start address
- * and size into the .parainstructions section, so that
- * apply_paravirt() in arch/i386/kernel/alternative.c can do the
- * appropriate patching under the control of the backend pv_init_ops
- * implementation.
- *
- * Unfortunately there's no way to get gcc to generate the args setup
- * for the call, and then allow the call itself to be generated by an
- * inline asm.  Because of this, we must do the complete arg setup and
- * return value handling from within these macros.  This is fairly
- * cumbersome.
- *
- * There are 5 sets of PVOP_* macros for dealing with 0-4 arguments.
- * It could be extended to more arguments, but there would be little
- * to be gained from that.  For each number of arguments, there are
- * the two VCALL and CALL variants for void and non-void functions.
- *
- * When there is a return value, the invoker of the macro must specify
- * the return type.  The macro then uses sizeof() on that type to
- * determine whether its a 32 or 64 bit value, and places the return
- * in the right register(s) (just %eax for 32-bit, and %edx:%eax for
- * 64-bit). For x86_64 machines, it just returns at %rax regardless of
- * the return value size.
- *
- * 64-bit arguments are passed as a pair of adjacent 32-bit arguments
- * i386 also passes 64-bit arguments as a pair of adjacent 32-bit arguments
- * in low,high order
- *
- * Small structures are passed and returned in registers.  The macro
- * calling convention can't directly deal with this, so the wrapper
- * functions must do this.
- *
- * These PVOP_* macros are only defined within this header.  This
- * means that all uses must be wrapped in inline functions.  This also
- * makes sure the incoming and outgoing types are always correct.
- */
-#ifdef CONFIG_X86_32
-#define PVOP_VCALL_ARGS				\
-	unsigned long __eax = __eax, __edx = __edx, __ecx = __ecx
-#define PVOP_CALL_ARGS			PVOP_VCALL_ARGS
-
-#define PVOP_CALL_ARG1(x)		"a" ((unsigned long)(x))
-#define PVOP_CALL_ARG2(x)		"d" ((unsigned long)(x))
-#define PVOP_CALL_ARG3(x)		"c" ((unsigned long)(x))
-
-#define PVOP_VCALL_CLOBBERS		"=a" (__eax), "=d" (__edx),	\
-					"=c" (__ecx)
-#define PVOP_CALL_CLOBBERS		PVOP_VCALL_CLOBBERS
-
-#define PVOP_VCALLEE_CLOBBERS		"=a" (__eax), "=d" (__edx)
-#define PVOP_CALLEE_CLOBBERS		PVOP_VCALLEE_CLOBBERS
-
-#define EXTRA_CLOBBERS
-#define VEXTRA_CLOBBERS
-#else  /* CONFIG_X86_64 */
-#define PVOP_VCALL_ARGS					\
-	unsigned long __edi = __edi, __esi = __esi,	\
-		__edx = __edx, __ecx = __ecx
-#define PVOP_CALL_ARGS		PVOP_VCALL_ARGS, __eax
-
-#define PVOP_CALL_ARG1(x)		"D" ((unsigned long)(x))
-#define PVOP_CALL_ARG2(x)		"S" ((unsigned long)(x))
-#define PVOP_CALL_ARG3(x)		"d" ((unsigned long)(x))
-#define PVOP_CALL_ARG4(x)		"c" ((unsigned long)(x))
-
-#define PVOP_VCALL_CLOBBERS	"=D" (__edi),				\
-				"=S" (__esi), "=d" (__edx),		\
-				"=c" (__ecx)
-#define PVOP_CALL_CLOBBERS	PVOP_VCALL_CLOBBERS, "=a" (__eax)
-
-#define PVOP_VCALLEE_CLOBBERS	"=a" (__eax)
-#define PVOP_CALLEE_CLOBBERS	PVOP_VCALLEE_CLOBBERS
-
-#define EXTRA_CLOBBERS	 , "r8", "r9", "r10", "r11"
-#define VEXTRA_CLOBBERS	 , "rax", "r8", "r9", "r10", "r11"
-#endif	/* CONFIG_X86_32 */
-
-#ifdef CONFIG_PARAVIRT_DEBUG
-#define PVOP_TEST_NULL(op)	BUG_ON(op == NULL)
-#else
-#define PVOP_TEST_NULL(op)	((void)op)
-#endif
-
-#define ____PVOP_CALL(rettype, op, clbr, call_clbr, extra_clbr,		\
-		      pre, post, ...)					\
-	({								\
-		rettype __ret;						\
-		PVOP_CALL_ARGS;						\
-		PVOP_TEST_NULL(op);					\
-		/* This is 32-bit specific, but is okay in 64-bit */	\
-		/* since this condition will never hold */		\
-		if (sizeof(rettype) > sizeof(unsigned long)) {		\
-			asm volatile(pre				\
-				     paravirt_alt(PARAVIRT_CALL)	\
-				     post				\
-				     : call_clbr			\
-				     : paravirt_type(op),		\
-				       paravirt_clobber(clbr),		\
-				       ##__VA_ARGS__			\
-				     : "memory", "cc" extra_clbr);	\
-			__ret = (rettype)((((u64)__edx) << 32) | __eax); \
-		} else {						\
-			asm volatile(pre				\
-				     paravirt_alt(PARAVIRT_CALL)	\
-				     post				\
-				     : call_clbr			\
-				     : paravirt_type(op),		\
-				       paravirt_clobber(clbr),		\
-				       ##__VA_ARGS__			\
-				     : "memory", "cc" extra_clbr);	\
-			__ret = (rettype)__eax;				\
-		}							\
-		__ret;							\
-	})
-
-#define __PVOP_CALL(rettype, op, pre, post, ...)			\
-	____PVOP_CALL(rettype, op, CLBR_ANY, PVOP_CALL_CLOBBERS,	\
-		      EXTRA_CLOBBERS, pre, post, ##__VA_ARGS__)
-
-#define __PVOP_CALLEESAVE(rettype, op, pre, post, ...)			\
-	____PVOP_CALL(rettype, op.func, CLBR_RET_REG,			\
-		      PVOP_CALLEE_CLOBBERS, ,				\
-		      pre, post, ##__VA_ARGS__)
-
-
-#define ____PVOP_VCALL(op, clbr, call_clbr, extra_clbr, pre, post, ...)	\
-	({								\
-		PVOP_VCALL_ARGS;					\
-		PVOP_TEST_NULL(op);					\
-		asm volatile(pre					\
-			     paravirt_alt(PARAVIRT_CALL)		\
-			     post					\
-			     : call_clbr				\
-			     : paravirt_type(op),			\
-			       paravirt_clobber(clbr),			\
-			       ##__VA_ARGS__				\
-			     : "memory", "cc" extra_clbr);		\
-	})
-
-#define __PVOP_VCALL(op, pre, post, ...)				\
-	____PVOP_VCALL(op, CLBR_ANY, PVOP_VCALL_CLOBBERS,		\
-		       VEXTRA_CLOBBERS,					\
-		       pre, post, ##__VA_ARGS__)
-
-#define __PVOP_VCALLEESAVE(rettype, op, pre, post, ...)			\
-	____PVOP_CALL(rettype, op.func, CLBR_RET_REG,			\
-		      PVOP_VCALLEE_CLOBBERS, ,				\
-		      pre, post, ##__VA_ARGS__)
-
-
-
-#define PVOP_CALL0(rettype, op)						\
-	__PVOP_CALL(rettype, op, "", "")
-#define PVOP_VCALL0(op)							\
-	__PVOP_VCALL(op, "", "")
-
-#define PVOP_CALLEE0(rettype, op)					\
-	__PVOP_CALLEESAVE(rettype, op, "", "")
-#define PVOP_VCALLEE0(op)						\
-	__PVOP_VCALLEESAVE(op, "", "")
-
-
-#define PVOP_CALL1(rettype, op, arg1)					\
-	__PVOP_CALL(rettype, op, "", "", PVOP_CALL_ARG1(arg1))
-#define PVOP_VCALL1(op, arg1)						\
-	__PVOP_VCALL(op, "", "", PVOP_CALL_ARG1(arg1))
-
-#define PVOP_CALLEE1(rettype, op, arg1)					\
-	__PVOP_CALLEESAVE(rettype, op, "", "", PVOP_CALL_ARG1(arg1))
-#define PVOP_VCALLEE1(op, arg1)						\
-	__PVOP_VCALLEESAVE(op, "", "", PVOP_CALL_ARG1(arg1))
-
-
-#define PVOP_CALL2(rettype, op, arg1, arg2)				\
-	__PVOP_CALL(rettype, op, "", "", PVOP_CALL_ARG1(arg1),		\
-		    PVOP_CALL_ARG2(arg2))
-#define PVOP_VCALL2(op, arg1, arg2)					\
-	__PVOP_VCALL(op, "", "", PVOP_CALL_ARG1(arg1),			\
-		     PVOP_CALL_ARG2(arg2))
-
-#define PVOP_CALLEE2(rettype, op, arg1, arg2)				\
-	__PVOP_CALLEESAVE(rettype, op, "", "", PVOP_CALL_ARG1(arg1),	\
-			  PVOP_CALL_ARG2(arg2))
-#define PVOP_VCALLEE2(op, arg1, arg2)					\
-	__PVOP_VCALLEESAVE(op, "", "", PVOP_CALL_ARG1(arg1),		\
-			   PVOP_CALL_ARG2(arg2))
-
-
-#define PVOP_CALL3(rettype, op, arg1, arg2, arg3)			\
-	__PVOP_CALL(rettype, op, "", "", PVOP_CALL_ARG1(arg1),		\
-		    PVOP_CALL_ARG2(arg2), PVOP_CALL_ARG3(arg3))
-#define PVOP_VCALL3(op, arg1, arg2, arg3)				\
-	__PVOP_VCALL(op, "", "", PVOP_CALL_ARG1(arg1),			\
-		     PVOP_CALL_ARG2(arg2), PVOP_CALL_ARG3(arg3))
-
-/* This is the only difference in x86_64. We can make it much simpler */
-#ifdef CONFIG_X86_32
-#define PVOP_CALL4(rettype, op, arg1, arg2, arg3, arg4)			\
-	__PVOP_CALL(rettype, op,					\
-		    "push %[_arg4];", "lea 4(%%esp),%%esp;",		\
-		    PVOP_CALL_ARG1(arg1), PVOP_CALL_ARG2(arg2),		\
-		    PVOP_CALL_ARG3(arg3), [_arg4] "mr" ((u32)(arg4)))
-#define PVOP_VCALL4(op, arg1, arg2, arg3, arg4)				\
-	__PVOP_VCALL(op,						\
-		    "push %[_arg4];", "lea 4(%%esp),%%esp;",		\
-		    "0" ((u32)(arg1)), "1" ((u32)(arg2)),		\
-		    "2" ((u32)(arg3)), [_arg4] "mr" ((u32)(arg4)))
-#else
-#define PVOP_CALL4(rettype, op, arg1, arg2, arg3, arg4)			\
-	__PVOP_CALL(rettype, op, "", "",				\
-		    PVOP_CALL_ARG1(arg1), PVOP_CALL_ARG2(arg2),		\
-		    PVOP_CALL_ARG3(arg3), PVOP_CALL_ARG4(arg4))
-#define PVOP_VCALL4(op, arg1, arg2, arg3, arg4)				\
-	__PVOP_VCALL(op, "", "",					\
-		     PVOP_CALL_ARG1(arg1), PVOP_CALL_ARG2(arg2),	\
-		     PVOP_CALL_ARG3(arg3), PVOP_CALL_ARG4(arg4))
-#endif
 
 static inline int paravirt_enabled(void)
 {
@@ -1393,20 +715,6 @@ static inline void pmd_clear(pmd_t *pmdp)
 }
 #endif	/* CONFIG_X86_PAE */
 
-/* Lazy mode for batching updates / context switch */
-enum paravirt_lazy_mode {
-	PARAVIRT_LAZY_NONE,
-	PARAVIRT_LAZY_MMU,
-	PARAVIRT_LAZY_CPU,
-};
-
-enum paravirt_lazy_mode paravirt_get_lazy_mode(void);
-void paravirt_start_context_switch(struct task_struct *prev);
-void paravirt_end_context_switch(struct task_struct *next);
-
-void paravirt_enter_lazy_mmu(void);
-void paravirt_leave_lazy_mmu(void);
-
 #define  __HAVE_ARCH_START_CONTEXT_SWITCH
 static inline void arch_start_context_switch(struct task_struct *prev)
 {
@@ -1437,12 +745,6 @@ static inline void __set_fixmap(unsigned /* enum fixed_addresses */ idx,
 	pv_mmu_ops.set_fixmap(idx, phys, flags);
 }
 
-void _paravirt_nop(void);
-u32 _paravirt_ident_32(u32);
-u64 _paravirt_ident_64(u64);
-
-#define paravirt_nop	((void *)_paravirt_nop)
-
 #if defined(CONFIG_SMP) && defined(CONFIG_PARAVIRT_SPINLOCKS)
 
 static inline int __raw_spin_is_locked(struct raw_spinlock *lock)
@@ -1479,17 +781,6 @@ static __always_inline void __raw_spin_unlock(struct raw_spinlock *lock)
 
 #endif
 
-/* These all sit in the .parainstructions section to tell us what to patch. */
-struct paravirt_patch_site {
-	u8 *instr; 		/* original instructions */
-	u8 instrtype;		/* type of this instruction */
-	u8 len;			/* length of original instruction */
-	u16 clobbers;		/* what registers you may clobber */
-};
-
-extern struct paravirt_patch_site __parainstructions[],
-	__parainstructions_end[];
-
 #ifdef CONFIG_X86_32
 #define PV_SAVE_REGS "pushl %ecx; pushl %edx;"
 #define PV_RESTORE_REGS "popl %edx; popl %ecx;"
diff --git a/arch/x86/include/asm/paravirt_types.h b/arch/x86/include/asm/paravirt_types.h
new file mode 100644
index 00000000000..2b3371bae29
--- /dev/null
+++ b/arch/x86/include/asm/paravirt_types.h
@@ -0,0 +1,720 @@
+#ifndef _ASM_X86_PARAVIRT_TYPES_H
+#define _ASM_X86_PARAVIRT_TYPES_H
+
+/* Bitmask of what can be clobbered: usually at least eax. */
+#define CLBR_NONE 0
+#define CLBR_EAX  (1 << 0)
+#define CLBR_ECX  (1 << 1)
+#define CLBR_EDX  (1 << 2)
+#define CLBR_EDI  (1 << 3)
+
+#ifdef CONFIG_X86_32
+/* CLBR_ANY should match all regs platform has. For i386, that's just it */
+#define CLBR_ANY  ((1 << 4) - 1)
+
+#define CLBR_ARG_REGS	(CLBR_EAX | CLBR_EDX | CLBR_ECX)
+#define CLBR_RET_REG	(CLBR_EAX | CLBR_EDX)
+#define CLBR_SCRATCH	(0)
+#else
+#define CLBR_RAX  CLBR_EAX
+#define CLBR_RCX  CLBR_ECX
+#define CLBR_RDX  CLBR_EDX
+#define CLBR_RDI  CLBR_EDI
+#define CLBR_RSI  (1 << 4)
+#define CLBR_R8   (1 << 5)
+#define CLBR_R9   (1 << 6)
+#define CLBR_R10  (1 << 7)
+#define CLBR_R11  (1 << 8)
+
+#define CLBR_ANY  ((1 << 9) - 1)
+
+#define CLBR_ARG_REGS	(CLBR_RDI | CLBR_RSI | CLBR_RDX | \
+			 CLBR_RCX | CLBR_R8 | CLBR_R9)
+#define CLBR_RET_REG	(CLBR_RAX)
+#define CLBR_SCRATCH	(CLBR_R10 | CLBR_R11)
+
+#endif /* X86_64 */
+
+#define CLBR_CALLEE_SAVE ((CLBR_ARG_REGS | CLBR_SCRATCH) & ~CLBR_RET_REG)
+
+#ifndef __ASSEMBLY__
+
+#include <asm/desc_defs.h>
+#include <asm/kmap_types.h>
+
+struct page;
+struct thread_struct;
+struct desc_ptr;
+struct tss_struct;
+struct mm_struct;
+struct desc_struct;
+struct task_struct;
+struct cpumask;
+
+/*
+ * Wrapper type for pointers to code which uses the non-standard
+ * calling convention.  See PV_CALL_SAVE_REGS_THUNK below.
+ */
+struct paravirt_callee_save {
+	void *func;
+};
+
+/* general info */
+struct pv_info {
+	unsigned int kernel_rpl;
+	int shared_kernel_pmd;
+	int paravirt_enabled;
+	const char *name;
+};
+
+struct pv_init_ops {
+	/*
+	 * Patch may replace one of the defined code sequences with
+	 * arbitrary code, subject to the same register constraints.
+	 * This generally means the code is not free to clobber any
+	 * registers other than EAX.  The patch function should return
+	 * the number of bytes of code generated, as we nop pad the
+	 * rest in generic code.
+	 */
+	unsigned (*patch)(u8 type, u16 clobber, void *insnbuf,
+			  unsigned long addr, unsigned len);
+
+	/* Basic arch-specific setup */
+	void (*arch_setup)(void);
+	char *(*memory_setup)(void);
+	void (*post_allocator_init)(void);
+
+	/* Print a banner to identify the environment */
+	void (*banner)(void);
+};
+
+
+struct pv_lazy_ops {
+	/* Set deferred update mode, used for batching operations. */
+	void (*enter)(void);
+	void (*leave)(void);
+};
+
+struct pv_time_ops {
+	void (*time_init)(void);
+
+	/* Set and set time of day */
+	unsigned long (*get_wallclock)(void);
+	int (*set_wallclock)(unsigned long);
+
+	unsigned long long (*sched_clock)(void);
+	unsigned long (*get_tsc_khz)(void);
+};
+
+struct pv_cpu_ops {
+	/* hooks for various privileged instructions */
+	unsigned long (*get_debugreg)(int regno);
+	void (*set_debugreg)(int regno, unsigned long value);
+
+	void (*clts)(void);
+
+	unsigned long (*read_cr0)(void);
+	void (*write_cr0)(unsigned long);
+
+	unsigned long (*read_cr4_safe)(void);
+	unsigned long (*read_cr4)(void);
+	void (*write_cr4)(unsigned long);
+
+#ifdef CONFIG_X86_64
+	unsigned long (*read_cr8)(void);
+	void (*write_cr8)(unsigned long);
+#endif
+
+	/* Segment descriptor handling */
+	void (*load_tr_desc)(void);
+	void (*load_gdt)(const struct desc_ptr *);
+	void (*load_idt)(const struct desc_ptr *);
+	void (*store_gdt)(struct desc_ptr *);
+	void (*store_idt)(struct desc_ptr *);
+	void (*set_ldt)(const void *desc, unsigned entries);
+	unsigned long (*store_tr)(void);
+	void (*load_tls)(struct thread_struct *t, unsigned int cpu);
+#ifdef CONFIG_X86_64
+	void (*load_gs_index)(unsigned int idx);
+#endif
+	void (*write_ldt_entry)(struct desc_struct *ldt, int entrynum,
+				const void *desc);
+	void (*write_gdt_entry)(struct desc_struct *,
+				int entrynum, const void *desc, int size);
+	void (*write_idt_entry)(gate_desc *,
+				int entrynum, const gate_desc *gate);
+	void (*alloc_ldt)(struct desc_struct *ldt, unsigned entries);
+	void (*free_ldt)(struct desc_struct *ldt, unsigned entries);
+
+	void (*load_sp0)(struct tss_struct *tss, struct thread_struct *t);
+
+	void (*set_iopl_mask)(unsigned mask);
+
+	void (*wbinvd)(void);
+	void (*io_delay)(void);
+
+	/* cpuid emulation, mostly so that caps bits can be disabled */
+	void (*cpuid)(unsigned int *eax, unsigned int *ebx,
+		      unsigned int *ecx, unsigned int *edx);
+
+	/* MSR, PMC and TSR operations.
+	   err = 0/-EFAULT.  wrmsr returns 0/-EFAULT. */
+	u64 (*read_msr_amd)(unsigned int msr, int *err);
+	u64 (*read_msr)(unsigned int msr, int *err);
+	int (*write_msr)(unsigned int msr, unsigned low, unsigned high);
+
+	u64 (*read_tsc)(void);
+	u64 (*read_pmc)(int counter);
+	unsigned long long (*read_tscp)(unsigned int *aux);
+
+	/*
+	 * Atomically enable interrupts and return to userspace.  This
+	 * is only ever used to return to 32-bit processes; in a
+	 * 64-bit kernel, it's used for 32-on-64 compat processes, but
+	 * never native 64-bit processes.  (Jump, not call.)
+	 */
+	void (*irq_enable_sysexit)(void);
+
+	/*
+	 * Switch to usermode gs and return to 64-bit usermode using
+	 * sysret.  Only used in 64-bit kernels to return to 64-bit
+	 * processes.  Usermode register state, including %rsp, must
+	 * already be restored.
+	 */
+	void (*usergs_sysret64)(void);
+
+	/*
+	 * Switch to usermode gs and return to 32-bit usermode using
+	 * sysret.  Used to return to 32-on-64 compat processes.
+	 * Other usermode register state, including %esp, must already
+	 * be restored.
+	 */
+	void (*usergs_sysret32)(void);
+
+	/* Normal iret.  Jump to this with the standard iret stack
+	   frame set up. */
+	void (*iret)(void);
+
+	void (*swapgs)(void);
+
+	void (*start_context_switch)(struct task_struct *prev);
+	void (*end_context_switch)(struct task_struct *next);
+};
+
+struct pv_irq_ops {
+	void (*init_IRQ)(void);
+
+	/*
+	 * Get/set interrupt state.  save_fl and restore_fl are only
+	 * expected to use X86_EFLAGS_IF; all other bits
+	 * returned from save_fl are undefined, and may be ignored by
+	 * restore_fl.
+	 *
+	 * NOTE: These functions callers expect the callee to preserve
+	 * more registers than the standard C calling convention.
+	 */
+	struct paravirt_callee_save save_fl;
+	struct paravirt_callee_save restore_fl;
+	struct paravirt_callee_save irq_disable;
+	struct paravirt_callee_save irq_enable;
+
+	void (*safe_halt)(void);
+	void (*halt)(void);
+
+#ifdef CONFIG_X86_64
+	void (*adjust_exception_frame)(void);
+#endif
+};
+
+struct pv_apic_ops {
+#ifdef CONFIG_X86_LOCAL_APIC
+	void (*setup_boot_clock)(void);
+	void (*setup_secondary_clock)(void);
+
+	void (*startup_ipi_hook)(int phys_apicid,
+				 unsigned long start_eip,
+				 unsigned long start_esp);
+#endif
+};
+
+struct pv_mmu_ops {
+	/*
+	 * Called before/after init_mm pagetable setup. setup_start
+	 * may reset %cr3, and may pre-install parts of the pagetable;
+	 * pagetable setup is expected to preserve any existing
+	 * mapping.
+	 */
+	void (*pagetable_setup_start)(pgd_t *pgd_base);
+	void (*pagetable_setup_done)(pgd_t *pgd_base);
+
+	unsigned long (*read_cr2)(void);
+	void (*write_cr2)(unsigned long);
+
+	unsigned long (*read_cr3)(void);
+	void (*write_cr3)(unsigned long);
+
+	/*
+	 * Hooks for intercepting the creation/use/destruction of an
+	 * mm_struct.
+	 */
+	void (*activate_mm)(struct mm_struct *prev,
+			    struct mm_struct *next);
+	void (*dup_mmap)(struct mm_struct *oldmm,
+			 struct mm_struct *mm);
+	void (*exit_mmap)(struct mm_struct *mm);
+
+
+	/* TLB operations */
+	void (*flush_tlb_user)(void);
+	void (*flush_tlb_kernel)(void);
+	void (*flush_tlb_single)(unsigned long addr);
+	void (*flush_tlb_others)(const struct cpumask *cpus,
+				 struct mm_struct *mm,
+				 unsigned long va);
+
+	/* Hooks for allocating and freeing a pagetable top-level */
+	int  (*pgd_alloc)(struct mm_struct *mm);
+	void (*pgd_free)(struct mm_struct *mm, pgd_t *pgd);
+
+	/*
+	 * Hooks for allocating/releasing pagetable pages when they're
+	 * attached to a pagetable
+	 */
+	void (*alloc_pte)(struct mm_struct *mm, unsigned long pfn);
+	void (*alloc_pmd)(struct mm_struct *mm, unsigned long pfn);
+	void (*alloc_pmd_clone)(unsigned long pfn, unsigned long clonepfn, unsigned long start, unsigned long count);
+	void (*alloc_pud)(struct mm_struct *mm, unsigned long pfn);
+	void (*release_pte)(unsigned long pfn);
+	void (*release_pmd)(unsigned long pfn);
+	void (*release_pud)(unsigned long pfn);
+
+	/* Pagetable manipulation functions */
+	void (*set_pte)(pte_t *ptep, pte_t pteval);
+	void (*set_pte_at)(struct mm_struct *mm, unsigned long addr,
+			   pte_t *ptep, pte_t pteval);
+	void (*set_pmd)(pmd_t *pmdp, pmd_t pmdval);
+	void (*pte_update)(struct mm_struct *mm, unsigned long addr,
+			   pte_t *ptep);
+	void (*pte_update_defer)(struct mm_struct *mm,
+				 unsigned long addr, pte_t *ptep);
+
+	pte_t (*ptep_modify_prot_start)(struct mm_struct *mm, unsigned long addr,
+					pte_t *ptep);
+	void (*ptep_modify_prot_commit)(struct mm_struct *mm, unsigned long addr,
+					pte_t *ptep, pte_t pte);
+
+	struct paravirt_callee_save pte_val;
+	struct paravirt_callee_save make_pte;
+
+	struct paravirt_callee_save pgd_val;
+	struct paravirt_callee_save make_pgd;
+
+#if PAGETABLE_LEVELS >= 3
+#ifdef CONFIG_X86_PAE
+	void (*set_pte_atomic)(pte_t *ptep, pte_t pteval);
+	void (*pte_clear)(struct mm_struct *mm, unsigned long addr,
+			  pte_t *ptep);
+	void (*pmd_clear)(pmd_t *pmdp);
+
+#endif	/* CONFIG_X86_PAE */
+
+	void (*set_pud)(pud_t *pudp, pud_t pudval);
+
+	struct paravirt_callee_save pmd_val;
+	struct paravirt_callee_save make_pmd;
+
+#if PAGETABLE_LEVELS == 4
+	struct paravirt_callee_save pud_val;
+	struct paravirt_callee_save make_pud;
+
+	void (*set_pgd)(pgd_t *pudp, pgd_t pgdval);
+#endif	/* PAGETABLE_LEVELS == 4 */
+#endif	/* PAGETABLE_LEVELS >= 3 */
+
+#ifdef CONFIG_HIGHPTE
+	void *(*kmap_atomic_pte)(struct page *page, enum km_type type);
+#endif
+
+	struct pv_lazy_ops lazy_mode;
+
+	/* dom0 ops */
+
+	/* Sometimes the physical address is a pfn, and sometimes its
+	   an mfn.  We can tell which is which from the index. */
+	void (*set_fixmap)(unsigned /* enum fixed_addresses */ idx,
+			   phys_addr_t phys, pgprot_t flags);
+};
+
+struct raw_spinlock;
+struct pv_lock_ops {
+	int (*spin_is_locked)(struct raw_spinlock *lock);
+	int (*spin_is_contended)(struct raw_spinlock *lock);
+	void (*spin_lock)(struct raw_spinlock *lock);
+	void (*spin_lock_flags)(struct raw_spinlock *lock, unsigned long flags);
+	int (*spin_trylock)(struct raw_spinlock *lock);
+	void (*spin_unlock)(struct raw_spinlock *lock);
+};
+
+/* This contains all the paravirt structures: we get a convenient
+ * number for each function using the offset which we use to indicate
+ * what to patch. */
+struct paravirt_patch_template {
+	struct pv_init_ops pv_init_ops;
+	struct pv_time_ops pv_time_ops;
+	struct pv_cpu_ops pv_cpu_ops;
+	struct pv_irq_ops pv_irq_ops;
+	struct pv_apic_ops pv_apic_ops;
+	struct pv_mmu_ops pv_mmu_ops;
+	struct pv_lock_ops pv_lock_ops;
+};
+
+extern struct pv_info pv_info;
+extern struct pv_init_ops pv_init_ops;
+extern struct pv_time_ops pv_time_ops;
+extern struct pv_cpu_ops pv_cpu_ops;
+extern struct pv_irq_ops pv_irq_ops;
+extern struct pv_apic_ops pv_apic_ops;
+extern struct pv_mmu_ops pv_mmu_ops;
+extern struct pv_lock_ops pv_lock_ops;
+
+#define PARAVIRT_PATCH(x)					\
+	(offsetof(struct paravirt_patch_template, x) / sizeof(void *))
+
+#define paravirt_type(op)				\
+	[paravirt_typenum] "i" (PARAVIRT_PATCH(op)),	\
+	[paravirt_opptr] "i" (&(op))
+#define paravirt_clobber(clobber)		\
+	[paravirt_clobber] "i" (clobber)
+
+/*
+ * Generate some code, and mark it as patchable by the
+ * apply_paravirt() alternate instruction patcher.
+ */
+#define _paravirt_alt(insn_string, type, clobber)	\
+	"771:\n\t" insn_string "\n" "772:\n"		\
+	".pushsection .parainstructions,\"a\"\n"	\
+	_ASM_ALIGN "\n"					\
+	_ASM_PTR " 771b\n"				\
+	"  .byte " type "\n"				\
+	"  .byte 772b-771b\n"				\
+	"  .short " clobber "\n"			\
+	".popsection\n"
+
+/* Generate patchable code, with the default asm parameters. */
+#define paravirt_alt(insn_string)					\
+	_paravirt_alt(insn_string, "%c[paravirt_typenum]", "%c[paravirt_clobber]")
+
+/* Simple instruction patching code. */
+#define DEF_NATIVE(ops, name, code) 					\
+	extern const char start_##ops##_##name[], end_##ops##_##name[];	\
+	asm("start_" #ops "_" #name ": " code "; end_" #ops "_" #name ":")
+
+unsigned paravirt_patch_nop(void);
+unsigned paravirt_patch_ident_32(void *insnbuf, unsigned len);
+unsigned paravirt_patch_ident_64(void *insnbuf, unsigned len);
+unsigned paravirt_patch_ignore(unsigned len);
+unsigned paravirt_patch_call(void *insnbuf,
+			     const void *target, u16 tgt_clobbers,
+			     unsigned long addr, u16 site_clobbers,
+			     unsigned len);
+unsigned paravirt_patch_jmp(void *insnbuf, const void *target,
+			    unsigned long addr, unsigned len);
+unsigned paravirt_patch_default(u8 type, u16 clobbers, void *insnbuf,
+				unsigned long addr, unsigned len);
+
+unsigned paravirt_patch_insns(void *insnbuf, unsigned len,
+			      const char *start, const char *end);
+
+unsigned native_patch(u8 type, u16 clobbers, void *ibuf,
+		      unsigned long addr, unsigned len);
+
+int paravirt_disable_iospace(void);
+
+/*
+ * This generates an indirect call based on the operation type number.
+ * The type number, computed in PARAVIRT_PATCH, is derived from the
+ * offset into the paravirt_patch_template structure, and can therefore be
+ * freely converted back into a structure offset.
+ */
+#define PARAVIRT_CALL	"call *%c[paravirt_opptr];"
+
+/*
+ * These macros are intended to wrap calls through one of the paravirt
+ * ops structs, so that they can be later identified and patched at
+ * runtime.
+ *
+ * Normally, a call to a pv_op function is a simple indirect call:
+ * (pv_op_struct.operations)(args...).
+ *
+ * Unfortunately, this is a relatively slow operation for modern CPUs,
+ * because it cannot necessarily determine what the destination
+ * address is.  In this case, the address is a runtime constant, so at
+ * the very least we can patch the call to e a simple direct call, or
+ * ideally, patch an inline implementation into the callsite.  (Direct
+ * calls are essentially free, because the call and return addresses
+ * are completely predictable.)
+ *
+ * For i386, these macros rely on the standard gcc "regparm(3)" calling
+ * convention, in which the first three arguments are placed in %eax,
+ * %edx, %ecx (in that order), and the remaining arguments are placed
+ * on the stack.  All caller-save registers (eax,edx,ecx) are expected
+ * to be modified (either clobbered or used for return values).
+ * X86_64, on the other hand, already specifies a register-based calling
+ * conventions, returning at %rax, with parameteres going on %rdi, %rsi,
+ * %rdx, and %rcx. Note that for this reason, x86_64 does not need any
+ * special handling for dealing with 4 arguments, unlike i386.
+ * However, x86_64 also have to clobber all caller saved registers, which
+ * unfortunately, are quite a bit (r8 - r11)
+ *
+ * The call instruction itself is marked by placing its start address
+ * and size into the .parainstructions section, so that
+ * apply_paravirt() in arch/i386/kernel/alternative.c can do the
+ * appropriate patching under the control of the backend pv_init_ops
+ * implementation.
+ *
+ * Unfortunately there's no way to get gcc to generate the args setup
+ * for the call, and then allow the call itself to be generated by an
+ * inline asm.  Because of this, we must do the complete arg setup and
+ * return value handling from within these macros.  This is fairly
+ * cumbersome.
+ *
+ * There are 5 sets of PVOP_* macros for dealing with 0-4 arguments.
+ * It could be extended to more arguments, but there would be little
+ * to be gained from that.  For each number of arguments, there are
+ * the two VCALL and CALL variants for void and non-void functions.
+ *
+ * When there is a return value, the invoker of the macro must specify
+ * the return type.  The macro then uses sizeof() on that type to
+ * determine whether its a 32 or 64 bit value, and places the return
+ * in the right register(s) (just %eax for 32-bit, and %edx:%eax for
+ * 64-bit). For x86_64 machines, it just returns at %rax regardless of
+ * the return value size.
+ *
+ * 64-bit arguments are passed as a pair of adjacent 32-bit arguments
+ * i386 also passes 64-bit arguments as a pair of adjacent 32-bit arguments
+ * in low,high order
+ *
+ * Small structures are passed and returned in registers.  The macro
+ * calling convention can't directly deal with this, so the wrapper
+ * functions must do this.
+ *
+ * These PVOP_* macros are only defined within this header.  This
+ * means that all uses must be wrapped in inline functions.  This also
+ * makes sure the incoming and outgoing types are always correct.
+ */
+#ifdef CONFIG_X86_32
+#define PVOP_VCALL_ARGS				\
+	unsigned long __eax = __eax, __edx = __edx, __ecx = __ecx
+#define PVOP_CALL_ARGS			PVOP_VCALL_ARGS
+
+#define PVOP_CALL_ARG1(x)		"a" ((unsigned long)(x))
+#define PVOP_CALL_ARG2(x)		"d" ((unsigned long)(x))
+#define PVOP_CALL_ARG3(x)		"c" ((unsigned long)(x))
+
+#define PVOP_VCALL_CLOBBERS		"=a" (__eax), "=d" (__edx),	\
+					"=c" (__ecx)
+#define PVOP_CALL_CLOBBERS		PVOP_VCALL_CLOBBERS
+
+#define PVOP_VCALLEE_CLOBBERS		"=a" (__eax), "=d" (__edx)
+#define PVOP_CALLEE_CLOBBERS		PVOP_VCALLEE_CLOBBERS
+
+#define EXTRA_CLOBBERS
+#define VEXTRA_CLOBBERS
+#else  /* CONFIG_X86_64 */
+#define PVOP_VCALL_ARGS					\
+	unsigned long __edi = __edi, __esi = __esi,	\
+		__edx = __edx, __ecx = __ecx
+#define PVOP_CALL_ARGS		PVOP_VCALL_ARGS, __eax
+
+#define PVOP_CALL_ARG1(x)		"D" ((unsigned long)(x))
+#define PVOP_CALL_ARG2(x)		"S" ((unsigned long)(x))
+#define PVOP_CALL_ARG3(x)		"d" ((unsigned long)(x))
+#define PVOP_CALL_ARG4(x)		"c" ((unsigned long)(x))
+
+#define PVOP_VCALL_CLOBBERS	"=D" (__edi),				\
+				"=S" (__esi), "=d" (__edx),		\
+				"=c" (__ecx)
+#define PVOP_CALL_CLOBBERS	PVOP_VCALL_CLOBBERS, "=a" (__eax)
+
+#define PVOP_VCALLEE_CLOBBERS	"=a" (__eax)
+#define PVOP_CALLEE_CLOBBERS	PVOP_VCALLEE_CLOBBERS
+
+#define EXTRA_CLOBBERS	 , "r8", "r9", "r10", "r11"
+#define VEXTRA_CLOBBERS	 , "rax", "r8", "r9", "r10", "r11"
+#endif	/* CONFIG_X86_32 */
+
+#ifdef CONFIG_PARAVIRT_DEBUG
+#define PVOP_TEST_NULL(op)	BUG_ON(op == NULL)
+#else
+#define PVOP_TEST_NULL(op)	((void)op)
+#endif
+
+#define ____PVOP_CALL(rettype, op, clbr, call_clbr, extra_clbr,		\
+		      pre, post, ...)					\
+	({								\
+		rettype __ret;						\
+		PVOP_CALL_ARGS;						\
+		PVOP_TEST_NULL(op);					\
+		/* This is 32-bit specific, but is okay in 64-bit */	\
+		/* since this condition will never hold */		\
+		if (sizeof(rettype) > sizeof(unsigned long)) {		\
+			asm volatile(pre				\
+				     paravirt_alt(PARAVIRT_CALL)	\
+				     post				\
+				     : call_clbr			\
+				     : paravirt_type(op),		\
+				       paravirt_clobber(clbr),		\
+				       ##__VA_ARGS__			\
+				     : "memory", "cc" extra_clbr);	\
+			__ret = (rettype)((((u64)__edx) << 32) | __eax); \
+		} else {						\
+			asm volatile(pre				\
+				     paravirt_alt(PARAVIRT_CALL)	\
+				     post				\
+				     : call_clbr			\
+				     : paravirt_type(op),		\
+				       paravirt_clobber(clbr),		\
+				       ##__VA_ARGS__			\
+				     : "memory", "cc" extra_clbr);	\
+			__ret = (rettype)__eax;				\
+		}							\
+		__ret;							\
+	})
+
+#define __PVOP_CALL(rettype, op, pre, post, ...)			\
+	____PVOP_CALL(rettype, op, CLBR_ANY, PVOP_CALL_CLOBBERS,	\
+		      EXTRA_CLOBBERS, pre, post, ##__VA_ARGS__)
+
+#define __PVOP_CALLEESAVE(rettype, op, pre, post, ...)			\
+	____PVOP_CALL(rettype, op.func, CLBR_RET_REG,			\
+		      PVOP_CALLEE_CLOBBERS, ,				\
+		      pre, post, ##__VA_ARGS__)
+
+
+#define ____PVOP_VCALL(op, clbr, call_clbr, extra_clbr, pre, post, ...)	\
+	({								\
+		PVOP_VCALL_ARGS;					\
+		PVOP_TEST_NULL(op);					\
+		asm volatile(pre					\
+			     paravirt_alt(PARAVIRT_CALL)		\
+			     post					\
+			     : call_clbr				\
+			     : paravirt_type(op),			\
+			       paravirt_clobber(clbr),			\
+			       ##__VA_ARGS__				\
+			     : "memory", "cc" extra_clbr);		\
+	})
+
+#define __PVOP_VCALL(op, pre, post, ...)				\
+	____PVOP_VCALL(op, CLBR_ANY, PVOP_VCALL_CLOBBERS,		\
+		       VEXTRA_CLOBBERS,					\
+		       pre, post, ##__VA_ARGS__)
+
+#define __PVOP_VCALLEESAVE(rettype, op, pre, post, ...)			\
+	____PVOP_CALL(rettype, op.func, CLBR_RET_REG,			\
+		      PVOP_VCALLEE_CLOBBERS, ,				\
+		      pre, post, ##__VA_ARGS__)
+
+
+
+#define PVOP_CALL0(rettype, op)						\
+	__PVOP_CALL(rettype, op, "", "")
+#define PVOP_VCALL0(op)							\
+	__PVOP_VCALL(op, "", "")
+
+#define PVOP_CALLEE0(rettype, op)					\
+	__PVOP_CALLEESAVE(rettype, op, "", "")
+#define PVOP_VCALLEE0(op)						\
+	__PVOP_VCALLEESAVE(op, "", "")
+
+
+#define PVOP_CALL1(rettype, op, arg1)					\
+	__PVOP_CALL(rettype, op, "", "", PVOP_CALL_ARG1(arg1))
+#define PVOP_VCALL1(op, arg1)						\
+	__PVOP_VCALL(op, "", "", PVOP_CALL_ARG1(arg1))
+
+#define PVOP_CALLEE1(rettype, op, arg1)					\
+	__PVOP_CALLEESAVE(rettype, op, "", "", PVOP_CALL_ARG1(arg1))
+#define PVOP_VCALLEE1(op, arg1)						\
+	__PVOP_VCALLEESAVE(op, "", "", PVOP_CALL_ARG1(arg1))
+
+
+#define PVOP_CALL2(rettype, op, arg1, arg2)				\
+	__PVOP_CALL(rettype, op, "", "", PVOP_CALL_ARG1(arg1),		\
+		    PVOP_CALL_ARG2(arg2))
+#define PVOP_VCALL2(op, arg1, arg2)					\
+	__PVOP_VCALL(op, "", "", PVOP_CALL_ARG1(arg1),			\
+		     PVOP_CALL_ARG2(arg2))
+
+#define PVOP_CALLEE2(rettype, op, arg1, arg2)				\
+	__PVOP_CALLEESAVE(rettype, op, "", "", PVOP_CALL_ARG1(arg1),	\
+			  PVOP_CALL_ARG2(arg2))
+#define PVOP_VCALLEE2(op, arg1, arg2)					\
+	__PVOP_VCALLEESAVE(op, "", "", PVOP_CALL_ARG1(arg1),		\
+			   PVOP_CALL_ARG2(arg2))
+
+
+#define PVOP_CALL3(rettype, op, arg1, arg2, arg3)			\
+	__PVOP_CALL(rettype, op, "", "", PVOP_CALL_ARG1(arg1),		\
+		    PVOP_CALL_ARG2(arg2), PVOP_CALL_ARG3(arg3))
+#define PVOP_VCALL3(op, arg1, arg2, arg3)				\
+	__PVOP_VCALL(op, "", "", PVOP_CALL_ARG1(arg1),			\
+		     PVOP_CALL_ARG2(arg2), PVOP_CALL_ARG3(arg3))
+
+/* This is the only difference in x86_64. We can make it much simpler */
+#ifdef CONFIG_X86_32
+#define PVOP_CALL4(rettype, op, arg1, arg2, arg3, arg4)			\
+	__PVOP_CALL(rettype, op,					\
+		    "push %[_arg4];", "lea 4(%%esp),%%esp;",		\
+		    PVOP_CALL_ARG1(arg1), PVOP_CALL_ARG2(arg2),		\
+		    PVOP_CALL_ARG3(arg3), [_arg4] "mr" ((u32)(arg4)))
+#define PVOP_VCALL4(op, arg1, arg2, arg3, arg4)				\
+	__PVOP_VCALL(op,						\
+		    "push %[_arg4];", "lea 4(%%esp),%%esp;",		\
+		    "0" ((u32)(arg1)), "1" ((u32)(arg2)),		\
+		    "2" ((u32)(arg3)), [_arg4] "mr" ((u32)(arg4)))
+#else
+#define PVOP_CALL4(rettype, op, arg1, arg2, arg3, arg4)			\
+	__PVOP_CALL(rettype, op, "", "",				\
+		    PVOP_CALL_ARG1(arg1), PVOP_CALL_ARG2(arg2),		\
+		    PVOP_CALL_ARG3(arg3), PVOP_CALL_ARG4(arg4))
+#define PVOP_VCALL4(op, arg1, arg2, arg3, arg4)				\
+	__PVOP_VCALL(op, "", "",					\
+		     PVOP_CALL_ARG1(arg1), PVOP_CALL_ARG2(arg2),	\
+		     PVOP_CALL_ARG3(arg3), PVOP_CALL_ARG4(arg4))
+#endif
+
+/* Lazy mode for batching updates / context switch */
+enum paravirt_lazy_mode {
+	PARAVIRT_LAZY_NONE,
+	PARAVIRT_LAZY_MMU,
+	PARAVIRT_LAZY_CPU,
+};
+
+enum paravirt_lazy_mode paravirt_get_lazy_mode(void);
+void paravirt_start_context_switch(struct task_struct *prev);
+void paravirt_end_context_switch(struct task_struct *next);
+
+void paravirt_enter_lazy_mmu(void);
+void paravirt_leave_lazy_mmu(void);
+
+void _paravirt_nop(void);
+u32 _paravirt_ident_32(u32);
+u64 _paravirt_ident_64(u64);
+
+#define paravirt_nop	((void *)_paravirt_nop)
+
+/* These all sit in the .parainstructions section to tell us what to patch. */
+struct paravirt_patch_site {
+	u8 *instr; 		/* original instructions */
+	u8 instrtype;		/* type of this instruction */
+	u8 len;			/* length of original instruction */
+	u16 clobbers;		/* what registers you may clobber */
+};
+
+extern struct paravirt_patch_site __parainstructions[],
+	__parainstructions_end[];
+
+#endif	/* __ASSEMBLY__ */
+
+#endif	/* _ASM_X86_PARAVIRT_TYPES_H */
-- 
cgit v1.2.3


From e6e9cac8c3417b43498b243c1f8f11780e157168 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Fri, 24 Apr 2009 00:40:59 -0700
Subject: x86: split out core __math_state_restore

Split the core fpu state restoration out into __math_state_restore, which
assumes that cr0.TS is clear and that the fpu context has been initialized.

This will be used during context switch.  There are two reasons this is
desireable:

- There's a small clarification.  When __switch_to() calls math_state_restore,
  it relies on the fact that tsk_used_math() returns true, and so will
  never do a blocking init_fpu().  __math_state_restore() does not have
  (or need) that logic, so the question never arises.

- It allows the clts() to be moved earler in __switch_to() so it can be performed
  while cpu context updates are batched (will be done in a later patch).

[ Impact: refactor code to make reuse cleaner; no functional change ]

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Alok Kataria <akataria@vmware.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
---
 arch/x86/include/asm/i387.h |  1 +
 arch/x86/kernel/traps.c     | 33 +++++++++++++++++++++++----------
 2 files changed, 24 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/i387.h b/arch/x86/include/asm/i387.h
index 175adf58dd4..2e7529295f5 100644
--- a/arch/x86/include/asm/i387.h
+++ b/arch/x86/include/asm/i387.h
@@ -26,6 +26,7 @@ extern void fpu_init(void);
 extern void mxcsr_feature_mask_init(void);
 extern int init_fpu(struct task_struct *child);
 extern asmlinkage void math_state_restore(void);
+extern void __math_state_restore(void);
 extern void init_thread_xstate(void);
 extern int dump_fpu(struct pt_regs *, struct user_i387_struct *);
 
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index 5f935f0d586..71b91669ad1 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -813,6 +813,28 @@ asmlinkage void __attribute__((weak)) smp_threshold_interrupt(void)
 {
 }
 
+/*
+ * __math_state_restore assumes that cr0.TS is already clear and the
+ * fpu state is all ready for use.  Used during context switch.
+ */
+void __math_state_restore(void)
+{
+	struct thread_info *thread = current_thread_info();
+	struct task_struct *tsk = thread->task;
+
+	/*
+	 * Paranoid restore. send a SIGSEGV if we fail to restore the state.
+	 */
+	if (unlikely(restore_fpu_checking(tsk))) {
+		stts();
+		force_sig(SIGSEGV, tsk);
+		return;
+	}
+
+	thread->status |= TS_USEDFPU;	/* So we fnsave on switch_to() */
+	tsk->fpu_counter++;
+}
+
 /*
  * 'math_state_restore()' saves the current math information in the
  * old math state array, and gets the new ones from the current task
@@ -844,17 +866,8 @@ asmlinkage void math_state_restore(void)
 	}
 
 	clts();				/* Allow maths ops (or we recurse) */
-	/*
-	 * Paranoid restore. send a SIGSEGV if we fail to restore the state.
-	 */
-	if (unlikely(restore_fpu_checking(tsk))) {
-		stts();
-		force_sig(SIGSEGV, tsk);
-		return;
-	}
 
-	thread->status |= TS_USEDFPU;	/* So we fnsave on switch_to() */
-	tsk->fpu_counter++;
+	__math_state_restore();
 }
 EXPORT_SYMBOL_GPL(math_state_restore);
 
-- 
cgit v1.2.3


From 2fcddce10f6771cfa0c56fd1e826d50d67d100b7 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Fri, 24 Apr 2009 00:45:26 -0700
Subject: x86-32: make sure clts is batched during context switch

If we're preloading the fpu state during context switch, make sure the clts
happens while we're batching the cpu context update, then do the actual
__math_state_restore once the updates are flushed.

This allows more efficient context switches when running paravirtualized,
as all the hypercalls can be folded together into one.

[ Impact: optimise paravirtual FPU context switch ]

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Alok Kataria <akataria@vmware.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
---
 arch/x86/kernel/process_32.c | 27 ++++++++++++++++-----------
 1 file changed, 16 insertions(+), 11 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
index 59f4524984a..a80eddd4165 100644
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -350,14 +350,21 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 				 *next = &next_p->thread;
 	int cpu = smp_processor_id();
 	struct tss_struct *tss = &per_cpu(init_tss, cpu);
+	bool preload_fpu;
 
 	/* never put a printk in __switch_to... printk() calls wake_up*() indirectly */
 
-	__unlazy_fpu(prev_p);
+	/*
+	 * If the task has used fpu the last 5 timeslices, just do a full
+	 * restore of the math state immediately to avoid the trap; the
+	 * chances of needing FPU soon are obviously high now
+	 */
+	preload_fpu = tsk_used_math(next_p) && next_p->fpu_counter > 5;
 
+	__unlazy_fpu(prev_p);
 
 	/* we're going to use this soon, after a few expensive things */
-	if (next_p->fpu_counter > 5)
+	if (preload_fpu)
 		prefetch(next->xstate);
 
 	/*
@@ -398,6 +405,11 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 		     task_thread_info(next_p)->flags & _TIF_WORK_CTXSW_NEXT))
 		__switch_to_xtra(prev_p, next_p, tss);
 
+	/* If we're going to preload the fpu context, make sure clts
+	   is run while we're batching the cpu state updates. */
+	if (preload_fpu)
+		clts();
+
 	/*
 	 * Leave lazy mode, flushing any hypercalls made here.
 	 * This must be done before restoring TLS segments so
@@ -407,15 +419,8 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 	 */
 	arch_end_context_switch(next_p);
 
-	/* If the task has used fpu the last 5 timeslices, just do a full
-	 * restore of the math state immediately to avoid the trap; the
-	 * chances of needing FPU soon are obviously high now
-	 *
-	 * tsk_used_math() checks prevent calling math_state_restore(),
-	 * which can sleep in the case of !tsk_used_math()
-	 */
-	if (tsk_used_math(next_p) && next_p->fpu_counter > 5)
-		math_state_restore();
+	if (preload_fpu)
+		__math_state_restore();
 
 	/*
 	 * Restore %gs if needed (which is common)
-- 
cgit v1.2.3


From 16d9dbf0c2bd167fdd942b83592d59696c7b73bd Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Fri, 24 Apr 2009 00:50:27 -0700
Subject: x86-64: move unlazy_fpu() into lazy cpu state part of context switch

Make sure that unlazy_fpu()'s stts gets batched along with the other
cpu state changes during context switch.  (32-bit already does this.)

This makes sure it gets batched when running paravirtualized.

[ Impact: optimise paravirtual FPU context switch ]

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Alok Kataria <akataria@vmware.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
---
 arch/x86/kernel/process_64.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index ebefb5407b9..c9b8904736d 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -419,6 +419,9 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 
 	load_TLS(next, cpu);
 
+	/* Must be after DS reload */
+	unlazy_fpu(prev_p);
+
 	/*
 	 * Leave lazy mode, flushing any hypercalls made here.
 	 * This must be done before restoring TLS segments so
@@ -459,9 +462,6 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 		wrmsrl(MSR_KERNEL_GS_BASE, next->gs);
 	prev->gsindex = gsindex;
 
-	/* Must be after DS reload */
-	unlazy_fpu(prev_p);
-
 	/*
 	 * Switch the PDA and FPU contexts.
 	 */
-- 
cgit v1.2.3


From 17950c5b243f99cbabef173415ee988c52104d7e Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Fri, 24 Apr 2009 01:01:01 -0700
Subject: x86-64: move clts into batch cpu state updates when preloading fpu

When a task is likely to be using the fpu, we preload its state during
the context switch, rather than waiting for it to run an fpu instruction.
Make sure the clts() happens while we're doing batched fpu state updates
to optimise paravirtualized context switches.

[ Impact: optimise paravirtual FPU context switch ]

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Alok Kataria <akataria@vmware.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
---
 arch/x86/kernel/process_64.c | 27 ++++++++++++++++++---------
 1 file changed, 18 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index c9b8904736d..a28279dbb07 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -386,9 +386,17 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 	int cpu = smp_processor_id();
 	struct tss_struct *tss = &per_cpu(init_tss, cpu);
 	unsigned fsindex, gsindex;
+	bool preload_fpu;
+
+	/*
+	 * If the task has used fpu the last 5 timeslices, just do a full
+	 * restore of the math state immediately to avoid the trap; the
+	 * chances of needing FPU soon are obviously high now
+	 */
+	preload_fpu = tsk_used_math(next_p) && next_p->fpu_counter > 5;
 
 	/* we're going to use this soon, after a few expensive things */
-	if (next_p->fpu_counter > 5)
+	if (preload_fpu)
 		prefetch(next->xstate);
 
 	/*
@@ -422,6 +430,10 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 	/* Must be after DS reload */
 	unlazy_fpu(prev_p);
 
+	/* Make sure cpu is ready for new context */
+	if (preload_fpu)
+		clts();
+
 	/*
 	 * Leave lazy mode, flushing any hypercalls made here.
 	 * This must be done before restoring TLS segments so
@@ -480,15 +492,12 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 		     task_thread_info(prev_p)->flags & _TIF_WORK_CTXSW_PREV))
 		__switch_to_xtra(prev_p, next_p, tss);
 
-	/* If the task has used fpu the last 5 timeslices, just do a full
-	 * restore of the math state immediately to avoid the trap; the
-	 * chances of needing FPU soon are obviously high now
-	 *
-	 * tsk_used_math() checks prevent calling math_state_restore(),
-	 * which can sleep in the case of !tsk_used_math()
+	/*
+	 * Preload the FPU context, now that we've determined that the
+	 * task is likely to be using it. 
 	 */
-	if (tsk_used_math(next_p) && next_p->fpu_counter > 5)
-		math_state_restore();
+	if (preload_fpu)
+		__math_state_restore();
 	return prev_p;
 }
 
-- 
cgit v1.2.3


From 03b56ce54143a3a69d4fea6ff8130b1c903a47ce Mon Sep 17 00:00:00 2001
From: Jarod Wilson <jarod@redhat.com>
Date: Thu, 18 Jun 2009 19:52:59 +0800
Subject: crypto: des_s390 - Permit weak keys unless REQ_WEAK_KEY set

Just started running fips cavs test vectors through an s390x system
for giggles, and discovered that I missed patching s390's arch-specific
des3 implementation w/an earlier des3 patch to permit weak keys.

This change adds the same flag tweaks as
ad79cdd77fc1466e45cf923890f66bcfe7c43f12 (crypto: des3_ede - permit
weak keys unless REQ_WEAK_KEY set) for s390's des3 implementation,
yields expected test results now.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
---
 arch/s390/crypto/des_s390.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/crypto/des_s390.c b/arch/s390/crypto/des_s390.c
index 4aba83b3159..2bc479ab3a6 100644
--- a/arch/s390/crypto/des_s390.c
+++ b/arch/s390/crypto/des_s390.c
@@ -250,8 +250,9 @@ static int des3_128_setkey(struct crypto_tfm *tfm, const u8 *key,
 	const u8 *temp_key = key;
 	u32 *flags = &tfm->crt_flags;
 
-	if (!(memcmp(key, &key[DES_KEY_SIZE], DES_KEY_SIZE))) {
-		*flags |= CRYPTO_TFM_RES_BAD_KEY_SCHED;
+	if (!(memcmp(key, &key[DES_KEY_SIZE], DES_KEY_SIZE)) &&
+	    (*flags & CRYPTO_TFM_REQ_WEAK_KEY)) {
+		*flags |= CRYPTO_TFM_RES_WEAK_KEY;
 		return -EINVAL;
 	}
 	for (i = 0; i < 2; i++, temp_key += DES_KEY_SIZE) {
@@ -411,9 +412,9 @@ static int des3_192_setkey(struct crypto_tfm *tfm, const u8 *key,
 
 	if (!(memcmp(key, &key[DES_KEY_SIZE], DES_KEY_SIZE) &&
 	    memcmp(&key[DES_KEY_SIZE], &key[DES_KEY_SIZE * 2],
-		   DES_KEY_SIZE))) {
-
-		*flags |= CRYPTO_TFM_RES_BAD_KEY_SCHED;
+		   DES_KEY_SIZE)) &&
+	    (*flags & CRYPTO_TFM_REQ_WEAK_KEY)) {
+		*flags |= CRYPTO_TFM_RES_WEAK_KEY;
 		return -EINVAL;
 	}
 	for (i = 0; i < 3; i++, temp_key += DES_KEY_SIZE) {
-- 
cgit v1.2.3


From 21e70878215f620fe99ea7d7c74bc641aeec932f Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinder@kernel.org>
Date: Thu, 18 Jun 2009 17:09:27 +0530
Subject: x86: oprofile/op_model_amd.c set return values for
 op_amd_handle_ibs()
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

op_amd_handle_ibs() should return 0 when IBS is not present or not defined.

Fix compilation warning:
 CC [M]  arch/x86/oprofile/op_model_amd.o
 arch/x86/oprofile/op_model_amd.c: In function ‘op_amd_handle_ibs’:
 arch/x86/oprofile/op_model_amd.c:217: warning: no return statement in function returning non-void

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/op_model_amd.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/op_model_amd.c b/arch/x86/oprofile/op_model_amd.c
index cc930467575..e95268eb922 100644
--- a/arch/x86/oprofile/op_model_amd.c
+++ b/arch/x86/oprofile/op_model_amd.c
@@ -132,7 +132,7 @@ op_amd_handle_ibs(struct pt_regs * const regs,
 	struct op_entry entry;
 
 	if (!has_ibs)
-		return 1;
+		return 0;
 
 	if (ibs_config.fetch_enabled) {
 		rdmsrl(MSR_AMD64_IBSFETCHCTL, ctl);
@@ -214,7 +214,10 @@ static void op_amd_stop_ibs(void)
 #else
 
 static inline int op_amd_handle_ibs(struct pt_regs * const regs,
-				    struct op_msrs const * const msrs) { }
+				    struct op_msrs const * const msrs)
+{
+	return 0;
+}
 static inline void op_amd_start_ibs(void) { }
 static inline void op_amd_stop_ibs(void) { }
 
-- 
cgit v1.2.3


From 4adc667593f83a18a8e54ce94f250fd166a272ac Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Thu, 18 Jun 2009 21:48:16 +0200
Subject: x86: add copies of some headers to convert to asm-generic

Just an intermediate step to make reviewing easier.
These files are identical copies of the existing headers.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
LKML-Reference: <cover.1245354003.git.arnd@arndb.de>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/include/asm/generic-mman.h        | 20 ++++++++
 arch/x86/include/asm/generic-module.h      | 80 ++++++++++++++++++++++++++++++
 arch/x86/include/asm/generic-scatterlist.h | 33 ++++++++++++
 arch/x86/include/asm/generic-types.h       | 30 +++++++++++
 arch/x86/include/asm/generic-ucontext.h    | 18 +++++++
 5 files changed, 181 insertions(+)
 create mode 100644 arch/x86/include/asm/generic-mman.h
 create mode 100644 arch/x86/include/asm/generic-module.h
 create mode 100644 arch/x86/include/asm/generic-scatterlist.h
 create mode 100644 arch/x86/include/asm/generic-types.h
 create mode 100644 arch/x86/include/asm/generic-ucontext.h

(limited to 'arch')

diff --git a/arch/x86/include/asm/generic-mman.h b/arch/x86/include/asm/generic-mman.h
new file mode 100644
index 00000000000..751af2550ed
--- /dev/null
+++ b/arch/x86/include/asm/generic-mman.h
@@ -0,0 +1,20 @@
+#ifndef _ASM_X86_MMAN_H
+#define _ASM_X86_MMAN_H
+
+#include <asm-generic/mman-common.h>
+
+#define MAP_32BIT	0x40		/* only give out 32bit addresses */
+
+#define MAP_GROWSDOWN	0x0100		/* stack-like segment */
+#define MAP_DENYWRITE	0x0800		/* ETXTBSY */
+#define MAP_EXECUTABLE	0x1000		/* mark it as an executable */
+#define MAP_LOCKED	0x2000		/* pages are locked */
+#define MAP_NORESERVE	0x4000		/* don't check for reservations */
+#define MAP_POPULATE	0x8000		/* populate (prefault) pagetables */
+#define MAP_NONBLOCK	0x10000		/* do not block on IO */
+#define MAP_STACK	0x20000		/* give out an address that is best suited for process/thread stacks */
+
+#define MCL_CURRENT	1		/* lock all current mappings */
+#define MCL_FUTURE	2		/* lock all future mappings */
+
+#endif /* _ASM_X86_MMAN_H */
diff --git a/arch/x86/include/asm/generic-module.h b/arch/x86/include/asm/generic-module.h
new file mode 100644
index 00000000000..47d62743c4d
--- /dev/null
+++ b/arch/x86/include/asm/generic-module.h
@@ -0,0 +1,80 @@
+#ifndef _ASM_X86_MODULE_H
+#define _ASM_X86_MODULE_H
+
+/* x86_32/64 are simple */
+struct mod_arch_specific {};
+
+#ifdef CONFIG_X86_32
+# define Elf_Shdr Elf32_Shdr
+# define Elf_Sym Elf32_Sym
+# define Elf_Ehdr Elf32_Ehdr
+#else
+# define Elf_Shdr Elf64_Shdr
+# define Elf_Sym Elf64_Sym
+# define Elf_Ehdr Elf64_Ehdr
+#endif
+
+#ifdef CONFIG_X86_64
+/* X86_64 does not define MODULE_PROC_FAMILY */
+#elif defined CONFIG_M386
+#define MODULE_PROC_FAMILY "386 "
+#elif defined CONFIG_M486
+#define MODULE_PROC_FAMILY "486 "
+#elif defined CONFIG_M586
+#define MODULE_PROC_FAMILY "586 "
+#elif defined CONFIG_M586TSC
+#define MODULE_PROC_FAMILY "586TSC "
+#elif defined CONFIG_M586MMX
+#define MODULE_PROC_FAMILY "586MMX "
+#elif defined CONFIG_MCORE2
+#define MODULE_PROC_FAMILY "CORE2 "
+#elif defined CONFIG_M686
+#define MODULE_PROC_FAMILY "686 "
+#elif defined CONFIG_MPENTIUMII
+#define MODULE_PROC_FAMILY "PENTIUMII "
+#elif defined CONFIG_MPENTIUMIII
+#define MODULE_PROC_FAMILY "PENTIUMIII "
+#elif defined CONFIG_MPENTIUMM
+#define MODULE_PROC_FAMILY "PENTIUMM "
+#elif defined CONFIG_MPENTIUM4
+#define MODULE_PROC_FAMILY "PENTIUM4 "
+#elif defined CONFIG_MK6
+#define MODULE_PROC_FAMILY "K6 "
+#elif defined CONFIG_MK7
+#define MODULE_PROC_FAMILY "K7 "
+#elif defined CONFIG_MK8
+#define MODULE_PROC_FAMILY "K8 "
+#elif defined CONFIG_X86_ELAN
+#define MODULE_PROC_FAMILY "ELAN "
+#elif defined CONFIG_MCRUSOE
+#define MODULE_PROC_FAMILY "CRUSOE "
+#elif defined CONFIG_MEFFICEON
+#define MODULE_PROC_FAMILY "EFFICEON "
+#elif defined CONFIG_MWINCHIPC6
+#define MODULE_PROC_FAMILY "WINCHIPC6 "
+#elif defined CONFIG_MWINCHIP3D
+#define MODULE_PROC_FAMILY "WINCHIP3D "
+#elif defined CONFIG_MCYRIXIII
+#define MODULE_PROC_FAMILY "CYRIXIII "
+#elif defined CONFIG_MVIAC3_2
+#define MODULE_PROC_FAMILY "VIAC3-2 "
+#elif defined CONFIG_MVIAC7
+#define MODULE_PROC_FAMILY "VIAC7 "
+#elif defined CONFIG_MGEODEGX1
+#define MODULE_PROC_FAMILY "GEODEGX1 "
+#elif defined CONFIG_MGEODE_LX
+#define MODULE_PROC_FAMILY "GEODE "
+#else
+#error unknown processor family
+#endif
+
+#ifdef CONFIG_X86_32
+# ifdef CONFIG_4KSTACKS
+#  define MODULE_STACKSIZE "4KSTACKS "
+# else
+#  define MODULE_STACKSIZE ""
+# endif
+# define MODULE_ARCH_VERMAGIC MODULE_PROC_FAMILY MODULE_STACKSIZE
+#endif
+
+#endif /* _ASM_X86_MODULE_H */
diff --git a/arch/x86/include/asm/generic-scatterlist.h b/arch/x86/include/asm/generic-scatterlist.h
new file mode 100644
index 00000000000..263d397d2ee
--- /dev/null
+++ b/arch/x86/include/asm/generic-scatterlist.h
@@ -0,0 +1,33 @@
+#ifndef _ASM_X86_SCATTERLIST_H
+#define _ASM_X86_SCATTERLIST_H
+
+#include <asm/types.h>
+
+struct scatterlist {
+#ifdef CONFIG_DEBUG_SG
+	unsigned long	sg_magic;
+#endif
+	unsigned long	page_link;
+	unsigned int	offset;
+	unsigned int	length;
+	dma_addr_t	dma_address;
+	unsigned int	dma_length;
+};
+
+#define ARCH_HAS_SG_CHAIN
+#define ISA_DMA_THRESHOLD (0x00ffffff)
+
+/*
+ * These macros should be used after a pci_map_sg call has been done
+ * to get bus addresses of each of the SG entries and their lengths.
+ * You should only work with the number of sg entries pci_map_sg
+ * returns.
+ */
+#define sg_dma_address(sg)	((sg)->dma_address)
+#ifdef CONFIG_X86_32
+# define sg_dma_len(sg)		((sg)->length)
+#else
+# define sg_dma_len(sg)		((sg)->dma_length)
+#endif
+
+#endif /* _ASM_X86_SCATTERLIST_H */
diff --git a/arch/x86/include/asm/generic-types.h b/arch/x86/include/asm/generic-types.h
new file mode 100644
index 00000000000..09b97745772
--- /dev/null
+++ b/arch/x86/include/asm/generic-types.h
@@ -0,0 +1,30 @@
+#ifndef _ASM_X86_TYPES_H
+#define _ASM_X86_TYPES_H
+
+#include <asm-generic/int-ll64.h>
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned short umode_t;
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * These aren't exported outside the kernel to avoid name space clashes
+ */
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+
+typedef u64 dma64_addr_t;
+#if defined(CONFIG_X86_64) || defined(CONFIG_HIGHMEM64G)
+/* DMA addresses come in 32-bit and 64-bit flavours. */
+typedef u64 dma_addr_t;
+#else
+typedef u32 dma_addr_t;
+#endif
+
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_X86_TYPES_H */
diff --git a/arch/x86/include/asm/generic-ucontext.h b/arch/x86/include/asm/generic-ucontext.h
new file mode 100644
index 00000000000..87324cf439d
--- /dev/null
+++ b/arch/x86/include/asm/generic-ucontext.h
@@ -0,0 +1,18 @@
+#ifndef _ASM_X86_UCONTEXT_H
+#define _ASM_X86_UCONTEXT_H
+
+#define UC_FP_XSTATE	0x1	/* indicates the presence of extended state
+				 * information in the memory layout pointed
+				 * by the fpstate pointer in the ucontext's
+				 * sigcontext struct (uc_mcontext).
+				 */
+
+struct ucontext {
+	unsigned long	  uc_flags;
+	struct ucontext  *uc_link;
+	stack_t		  uc_stack;
+	struct sigcontext uc_mcontext;
+	sigset_t	  uc_sigmask;	/* mask last for extensibility */
+};
+
+#endif /* _ASM_X86_UCONTEXT_H */
-- 
cgit v1.2.3


From 7bfd124d6dae7d394e73753300594a81a022fe7d Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Thu, 18 Jun 2009 21:48:17 +0200
Subject: x86: convert trivial headers to asm-generic version

For these nine header files, the asm-generic version should
be semantically identical to what is in x86. Change the
contents to be binary identical, for better review.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
LKML-Reference: <cover.1245354003.git.arnd@arndb.de>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/include/asm/ioctls.h   | 40 ++++++++++++++++++++++++++++------------
 arch/x86/include/asm/ipcbuf.h   | 15 ++++++++++-----
 arch/x86/include/asm/msgbuf.h   | 30 +++++++++++++++++++-----------
 arch/x86/include/asm/param.h    |  8 +++++---
 arch/x86/include/asm/shmbuf.h   | 28 ++++++++++++++++++----------
 arch/x86/include/asm/socket.h   | 10 +++++-----
 arch/x86/include/asm/sockios.h  |  6 +++---
 arch/x86/include/asm/termbits.h |  8 ++++----
 8 files changed, 92 insertions(+), 53 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/ioctls.h b/arch/x86/include/asm/ioctls.h
index 0d5b23b7b06..a799e20a769 100644
--- a/arch/x86/include/asm/ioctls.h
+++ b/arch/x86/include/asm/ioctls.h
@@ -1,12 +1,23 @@
-#ifndef _ASM_X86_IOCTLS_H
-#define _ASM_X86_IOCTLS_H
+#ifndef __ASM_GENERIC_IOCTLS_H
+#define __ASM_GENERIC_IOCTLS_H
 
-#include <asm/ioctl.h>
+#include <linux/ioctl.h>
+
+/*
+ * These are the most common definitions for tty ioctl numbers.
+ * Most of them do not use the recommended _IOC(), but there is
+ * probably some source code out there hardcoding the number,
+ * so we might as well use them for all new platforms.
+ *
+ * The architectures that use different values here typically
+ * try to be compatible with some Unix variants for the same
+ * architecture.
+ */
 
 /* 0x54 is just a magic number to make these relatively unique ('T') */
 
 #define TCGETS		0x5401
-#define TCSETS		0x5402 /* Clashes with SNDCTL_TMR_START sound ioctl */
+#define TCSETS		0x5402
 #define TCSETSW		0x5403
 #define TCSETSF		0x5404
 #define TCGETA		0x5405
@@ -43,7 +54,6 @@
 #define TIOCSETD	0x5423
 #define TIOCGETD	0x5424
 #define TCSBRKP		0x5425	/* Needed for POSIX tcsendbreak() */
-/* #define TIOCTTYGSTRUCT 0x5426 - Former debugging-only ioctl */
 #define TIOCSBRK	0x5427  /* BSD compatibility */
 #define TIOCCBRK	0x5428  /* BSD compatibility */
 #define TIOCGSID	0x5429  /* Return the session ID of FD */
@@ -53,8 +63,7 @@
 #define TCSETSF2	_IOW('T', 0x2D, struct termios2)
 #define TIOCGRS485	0x542E
 #define TIOCSRS485	0x542F
-#define TIOCGPTN	_IOR('T', 0x30, unsigned int)
-				/* Get Pty Number (of pty-mux device) */
+#define TIOCGPTN	_IOR('T', 0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
 #define TIOCSPTLCK	_IOW('T', 0x31, int)  /* Lock/unlock Pty */
 #define TCGETX		0x5432 /* SYS5 TCGETX compatibility */
 #define TCSETX		0x5433
@@ -76,9 +85,16 @@
 
 #define TIOCMIWAIT	0x545C	/* wait for a change on serial input line(s) */
 #define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
-#define TIOCGHAYESESP   0x545E  /* Get Hayes ESP configuration */
-#define TIOCSHAYESESP   0x545F  /* Set Hayes ESP configuration */
-#define FIOQSIZE	0x5460
+
+/*
+ * some architectures define FIOQSIZE as 0x545E, which is used for
+ * TIOCGHAYESESP on others
+ */
+#ifndef FIOQSIZE
+# define TIOCGHAYESESP	0x545E  /* Get Hayes ESP configuration */
+# define TIOCSHAYESESP	0x545F  /* Set Hayes ESP configuration */
+# define FIOQSIZE	0x5460
+#endif
 
 /* Used for packet mode */
 #define TIOCPKT_DATA		 0
@@ -89,6 +105,6 @@
 #define TIOCPKT_NOSTOP		16
 #define TIOCPKT_DOSTOP		32
 
-#define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
+#define TIOCSER_TEMT	0x01	/* Transmitter physically empty */
 
-#endif /* _ASM_X86_IOCTLS_H */
+#endif /* __ASM_GENERIC_IOCTLS_H */
diff --git a/arch/x86/include/asm/ipcbuf.h b/arch/x86/include/asm/ipcbuf.h
index ee678fd5159..888ca1c8f95 100644
--- a/arch/x86/include/asm/ipcbuf.h
+++ b/arch/x86/include/asm/ipcbuf.h
@@ -1,13 +1,18 @@
-#ifndef _ASM_X86_IPCBUF_H
-#define _ASM_X86_IPCBUF_H
+#ifndef __ASM_GENERIC_IPCBUF_H
+#define __ASM_GENERIC_IPCBUF_H
 
 /*
- * The ipc64_perm structure for x86 architecture.
+ * The generic ipc64_perm structure:
  * Note extra padding because this structure is passed back and forth
  * between kernel and user space.
  *
+ * ipc64_perm was originally meant to be architecture specific, but
+ * everyone just ended up making identical copies without specific
+ * optimizations, so we may just as well all use the same one.
+ *
  * Pad space is left for:
- * - 32-bit mode_t and seq
+ * - 32-bit mode_t on architectures that only had 16 bit
+ * - 32-bit seq
  * - 2 miscellaneous 32-bit values
  */
 
@@ -25,4 +30,4 @@ struct ipc64_perm {
 	unsigned long		__unused2;
 };
 
-#endif /* _ASM_X86_IPCBUF_H */
+#endif /* __ASM_GENERIC_IPCBUF_H */
diff --git a/arch/x86/include/asm/msgbuf.h b/arch/x86/include/asm/msgbuf.h
index 7e4e9481f51..aec850d9159 100644
--- a/arch/x86/include/asm/msgbuf.h
+++ b/arch/x86/include/asm/msgbuf.h
@@ -1,30 +1,38 @@
-#ifndef _ASM_X86_MSGBUF_H
-#define _ASM_X86_MSGBUF_H
+#ifndef __ASM_GENERIC_MSGBUF_H
+#define __ASM_GENERIC_MSGBUF_H
 
+#include <asm/bitsperlong.h>
 /*
- * The msqid64_ds structure for i386 architecture.
+ * generic msqid64_ds structure.
+ *
  * Note extra padding because this structure is passed back and forth
  * between kernel and user space.
  *
- * Pad space on i386 is left for:
+ * msqid64_ds was originally meant to be architecture specific, but
+ * everyone just ended up making identical copies without specific
+ * optimizations, so we may just as well all use the same one.
+ *
+ * 64 bit architectures typically define a 64 bit __kernel_time_t,
+ * so they do not need the first three padding words.
+ * On big-endian systems, the padding is in the wrong place.
+ *
+ * Pad space is left for:
  * - 64-bit time_t to solve y2038 problem
  * - 2 miscellaneous 32-bit values
- *
- * Pad space on x8664 is left for:
- * - 2 miscellaneous 64-bit values
  */
+
 struct msqid64_ds {
 	struct ipc64_perm msg_perm;
 	__kernel_time_t msg_stime;	/* last msgsnd time */
-#ifdef __i386__
+#if __BITS_PER_LONG != 64
 	unsigned long	__unused1;
 #endif
 	__kernel_time_t msg_rtime;	/* last msgrcv time */
-#ifdef __i386__
+#if __BITS_PER_LONG != 64
 	unsigned long	__unused2;
 #endif
 	__kernel_time_t msg_ctime;	/* last change time */
-#ifdef __i386__
+#if __BITS_PER_LONG != 64
 	unsigned long	__unused3;
 #endif
 	unsigned long  msg_cbytes;	/* current number of bytes on queue */
@@ -36,4 +44,4 @@ struct msqid64_ds {
 	unsigned long  __unused5;
 };
 
-#endif /* _ASM_X86_MSGBUF_H */
+#endif /* __ASM_GENERIC_MSGBUF_H */
diff --git a/arch/x86/include/asm/param.h b/arch/x86/include/asm/param.h
index 6f0d0422f4c..cdf8251bfb6 100644
--- a/arch/x86/include/asm/param.h
+++ b/arch/x86/include/asm/param.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_PARAM_H
-#define _ASM_X86_PARAM_H
+#ifndef __ASM_GENERIC_PARAM_H
+#define __ASM_GENERIC_PARAM_H
 
 #ifdef __KERNEL__
 # define HZ		CONFIG_HZ	/* Internal kernel timer frequency */
@@ -11,7 +11,9 @@
 #define HZ 100
 #endif
 
+#ifndef EXEC_PAGESIZE
 #define EXEC_PAGESIZE	4096
+#endif
 
 #ifndef NOGROUP
 #define NOGROUP		(-1)
@@ -19,4 +21,4 @@
 
 #define MAXHOSTNAMELEN	64	/* max length of hostname */
 
-#endif /* _ASM_X86_PARAM_H */
+#endif /* __ASM_GENERIC_PARAM_H */
diff --git a/arch/x86/include/asm/shmbuf.h b/arch/x86/include/asm/shmbuf.h
index b51413b7497..5768fa60ac8 100644
--- a/arch/x86/include/asm/shmbuf.h
+++ b/arch/x86/include/asm/shmbuf.h
@@ -1,32 +1,40 @@
-#ifndef _ASM_X86_SHMBUF_H
-#define _ASM_X86_SHMBUF_H
+#ifndef __ASM_GENERIC_SHMBUF_H
+#define __ASM_GENERIC_SHMBUF_H
+
+#include <asm/bitsperlong.h>
 
 /*
  * The shmid64_ds structure for x86 architecture.
  * Note extra padding because this structure is passed back and forth
  * between kernel and user space.
  *
- * Pad space on 32 bit is left for:
+ * shmid64_ds was originally meant to be architecture specific, but
+ * everyone just ended up making identical copies without specific
+ * optimizations, so we may just as well all use the same one.
+ *
+ * 64 bit architectures typically define a 64 bit __kernel_time_t,
+ * so they do not need the first two padding words.
+ * On big-endian systems, the padding is in the wrong place.
+ *
+ *
+ * Pad space is left for:
  * - 64-bit time_t to solve y2038 problem
  * - 2 miscellaneous 32-bit values
- *
- * Pad space on 64 bit is left for:
- * - 2 miscellaneous 64-bit values
  */
 
 struct shmid64_ds {
 	struct ipc64_perm	shm_perm;	/* operation perms */
 	size_t			shm_segsz;	/* size of segment (bytes) */
 	__kernel_time_t		shm_atime;	/* last attach time */
-#ifdef __i386__
+#if __BITS_PER_LONG != 64
 	unsigned long		__unused1;
 #endif
 	__kernel_time_t		shm_dtime;	/* last detach time */
-#ifdef __i386__
+#if __BITS_PER_LONG != 64
 	unsigned long		__unused2;
 #endif
 	__kernel_time_t		shm_ctime;	/* last change time */
-#ifdef __i386__
+#if __BITS_PER_LONG != 64
 	unsigned long		__unused3;
 #endif
 	__kernel_pid_t		shm_cpid;	/* pid of creator */
@@ -48,4 +56,4 @@ struct shminfo64 {
 	unsigned long	__unused4;
 };
 
-#endif /* _ASM_X86_SHMBUF_H */
+#endif /* __ASM_GENERIC_SHMBUF_H */
diff --git a/arch/x86/include/asm/socket.h b/arch/x86/include/asm/socket.h
index ca8bf2cd0ba..d4ae42a06a2 100644
--- a/arch/x86/include/asm/socket.h
+++ b/arch/x86/include/asm/socket.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_SOCKET_H
-#define _ASM_X86_SOCKET_H
+#ifndef __ASM_GENERIC_SOCKET_H
+#define __ASM_GENERIC_SOCKET_H
 
 #include <asm/sockios.h>
 
@@ -38,8 +38,8 @@
 #define SO_BINDTODEVICE	25
 
 /* Socket filtering */
-#define SO_ATTACH_FILTER        26
-#define SO_DETACH_FILTER        27
+#define SO_ATTACH_FILTER	26
+#define SO_DETACH_FILTER	27
 
 #define SO_PEERNAME		28
 #define SO_TIMESTAMP		29
@@ -57,4 +57,4 @@
 #define SO_TIMESTAMPING		37
 #define SCM_TIMESTAMPING	SO_TIMESTAMPING
 
-#endif /* _ASM_X86_SOCKET_H */
+#endif /* __ASM_GENERIC_SOCKET_H */
diff --git a/arch/x86/include/asm/sockios.h b/arch/x86/include/asm/sockios.h
index 49cc72b5d3c..9a61a369b90 100644
--- a/arch/x86/include/asm/sockios.h
+++ b/arch/x86/include/asm/sockios.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_SOCKIOS_H
-#define _ASM_X86_SOCKIOS_H
+#ifndef __ASM_GENERIC_SOCKIOS_H
+#define __ASM_GENERIC_SOCKIOS_H
 
 /* Socket-level I/O control calls. */
 #define FIOSETOWN	0x8901
@@ -10,4 +10,4 @@
 #define SIOCGSTAMP	0x8906		/* Get stamp (timeval) */
 #define SIOCGSTAMPNS	0x8907		/* Get stamp (timespec) */
 
-#endif /* _ASM_X86_SOCKIOS_H */
+#endif /* __ASM_GENERIC_SOCKIOS_H */
diff --git a/arch/x86/include/asm/termbits.h b/arch/x86/include/asm/termbits.h
index af1b70ea440..1c9773d48cb 100644
--- a/arch/x86/include/asm/termbits.h
+++ b/arch/x86/include/asm/termbits.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_X86_TERMBITS_H
-#define _ASM_X86_TERMBITS_H
+#ifndef __ASM_GENERIC_TERMBITS_H
+#define __ASM_GENERIC_TERMBITS_H
 
 #include <linux/posix_types.h>
 
@@ -140,7 +140,7 @@ struct ktermios {
 #define HUPCL	0002000
 #define CLOCAL	0004000
 #define CBAUDEX 0010000
-#define	   BOTHER 0010000		/* non standard rate */
+#define    BOTHER 0010000
 #define    B57600 0010001
 #define   B115200 0010002
 #define   B230400 0010003
@@ -195,4 +195,4 @@ struct ktermios {
 #define	TCSADRAIN	1
 #define	TCSAFLUSH	2
 
-#endif /* _ASM_X86_TERMBITS_H */
+#endif /* __ASM_GENERIC_TERMBITS_H */
-- 
cgit v1.2.3


From 06f5013aa8eb5895ced2c71d13f5114103605555 Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Thu, 18 Jun 2009 21:48:18 +0200
Subject: x86: convert almost generic headers to asm-generic version

In x86, mman.h, module.h, scatterlist.h, types.h and ucontext.h
can use the asm-generic version by just defining the x86
specific parts locally and falling back on the generic code
for the common bits.

This patch illustrates the differences between the x86 and
asm-generic versions by changing a file that is initially
identical to the x86 version to one that is identical
to the asm-generic version.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
LKML-Reference: <cover.1245354003.git.arnd@arndb.de>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/include/asm/generic-mman.h        |  8 +--
 arch/x86/include/asm/generic-module.h      | 92 ++++++------------------------
 arch/x86/include/asm/generic-scatterlist.h | 34 +++++++----
 arch/x86/include/asm/generic-types.h       | 32 +++++++----
 arch/x86/include/asm/generic-ucontext.h    | 12 +---
 arch/x86/include/asm/mman.h                | 14 +----
 arch/x86/include/asm/module.h              | 13 +----
 arch/x86/include/asm/scatterlist.h         | 27 +--------
 arch/x86/include/asm/types.h               | 12 +---
 arch/x86/include/asm/ucontext.h            |  8 +--
 10 files changed, 73 insertions(+), 179 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/generic-mman.h b/arch/x86/include/asm/generic-mman.h
index 751af2550ed..7cab4de2bca 100644
--- a/arch/x86/include/asm/generic-mman.h
+++ b/arch/x86/include/asm/generic-mman.h
@@ -1,10 +1,8 @@
-#ifndef _ASM_X86_MMAN_H
-#define _ASM_X86_MMAN_H
+#ifndef __ASM_GENERIC_MMAN_H
+#define __ASM_GENERIC_MMAN_H
 
 #include <asm-generic/mman-common.h>
 
-#define MAP_32BIT	0x40		/* only give out 32bit addresses */
-
 #define MAP_GROWSDOWN	0x0100		/* stack-like segment */
 #define MAP_DENYWRITE	0x0800		/* ETXTBSY */
 #define MAP_EXECUTABLE	0x1000		/* mark it as an executable */
@@ -17,4 +15,4 @@
 #define MCL_CURRENT	1		/* lock all current mappings */
 #define MCL_FUTURE	2		/* lock all future mappings */
 
-#endif /* _ASM_X86_MMAN_H */
+#endif /* __ASM_GENERIC_MMAN_H */
diff --git a/arch/x86/include/asm/generic-module.h b/arch/x86/include/asm/generic-module.h
index 47d62743c4d..ed5b44de4c9 100644
--- a/arch/x86/include/asm/generic-module.h
+++ b/arch/x86/include/asm/generic-module.h
@@ -1,80 +1,22 @@
-#ifndef _ASM_X86_MODULE_H
-#define _ASM_X86_MODULE_H
+#ifndef __ASM_GENERIC_MODULE_H
+#define __ASM_GENERIC_MODULE_H
 
-/* x86_32/64 are simple */
-struct mod_arch_specific {};
+/*
+ * Many architectures just need a simple module
+ * loader without arch specific data.
+ */
+struct mod_arch_specific
+{
+};
 
-#ifdef CONFIG_X86_32
-# define Elf_Shdr Elf32_Shdr
-# define Elf_Sym Elf32_Sym
-# define Elf_Ehdr Elf32_Ehdr
+#ifdef CONFIG_64BIT
+#define Elf_Shdr Elf64_Shdr
+#define Elf_Sym Elf64_Sym
+#define Elf_Ehdr Elf64_Ehdr
 #else
-# define Elf_Shdr Elf64_Shdr
-# define Elf_Sym Elf64_Sym
-# define Elf_Ehdr Elf64_Ehdr
+#define Elf_Shdr Elf32_Shdr
+#define Elf_Sym Elf32_Sym
+#define Elf_Ehdr Elf32_Ehdr
 #endif
 
-#ifdef CONFIG_X86_64
-/* X86_64 does not define MODULE_PROC_FAMILY */
-#elif defined CONFIG_M386
-#define MODULE_PROC_FAMILY "386 "
-#elif defined CONFIG_M486
-#define MODULE_PROC_FAMILY "486 "
-#elif defined CONFIG_M586
-#define MODULE_PROC_FAMILY "586 "
-#elif defined CONFIG_M586TSC
-#define MODULE_PROC_FAMILY "586TSC "
-#elif defined CONFIG_M586MMX
-#define MODULE_PROC_FAMILY "586MMX "
-#elif defined CONFIG_MCORE2
-#define MODULE_PROC_FAMILY "CORE2 "
-#elif defined CONFIG_M686
-#define MODULE_PROC_FAMILY "686 "
-#elif defined CONFIG_MPENTIUMII
-#define MODULE_PROC_FAMILY "PENTIUMII "
-#elif defined CONFIG_MPENTIUMIII
-#define MODULE_PROC_FAMILY "PENTIUMIII "
-#elif defined CONFIG_MPENTIUMM
-#define MODULE_PROC_FAMILY "PENTIUMM "
-#elif defined CONFIG_MPENTIUM4
-#define MODULE_PROC_FAMILY "PENTIUM4 "
-#elif defined CONFIG_MK6
-#define MODULE_PROC_FAMILY "K6 "
-#elif defined CONFIG_MK7
-#define MODULE_PROC_FAMILY "K7 "
-#elif defined CONFIG_MK8
-#define MODULE_PROC_FAMILY "K8 "
-#elif defined CONFIG_X86_ELAN
-#define MODULE_PROC_FAMILY "ELAN "
-#elif defined CONFIG_MCRUSOE
-#define MODULE_PROC_FAMILY "CRUSOE "
-#elif defined CONFIG_MEFFICEON
-#define MODULE_PROC_FAMILY "EFFICEON "
-#elif defined CONFIG_MWINCHIPC6
-#define MODULE_PROC_FAMILY "WINCHIPC6 "
-#elif defined CONFIG_MWINCHIP3D
-#define MODULE_PROC_FAMILY "WINCHIP3D "
-#elif defined CONFIG_MCYRIXIII
-#define MODULE_PROC_FAMILY "CYRIXIII "
-#elif defined CONFIG_MVIAC3_2
-#define MODULE_PROC_FAMILY "VIAC3-2 "
-#elif defined CONFIG_MVIAC7
-#define MODULE_PROC_FAMILY "VIAC7 "
-#elif defined CONFIG_MGEODEGX1
-#define MODULE_PROC_FAMILY "GEODEGX1 "
-#elif defined CONFIG_MGEODE_LX
-#define MODULE_PROC_FAMILY "GEODE "
-#else
-#error unknown processor family
-#endif
-
-#ifdef CONFIG_X86_32
-# ifdef CONFIG_4KSTACKS
-#  define MODULE_STACKSIZE "4KSTACKS "
-# else
-#  define MODULE_STACKSIZE ""
-# endif
-# define MODULE_ARCH_VERMAGIC MODULE_PROC_FAMILY MODULE_STACKSIZE
-#endif
-
-#endif /* _ASM_X86_MODULE_H */
+#endif /* __ASM_GENERIC_MODULE_H */
diff --git a/arch/x86/include/asm/generic-scatterlist.h b/arch/x86/include/asm/generic-scatterlist.h
index 263d397d2ee..8b9454496a7 100644
--- a/arch/x86/include/asm/generic-scatterlist.h
+++ b/arch/x86/include/asm/generic-scatterlist.h
@@ -1,7 +1,7 @@
-#ifndef _ASM_X86_SCATTERLIST_H
-#define _ASM_X86_SCATTERLIST_H
+#ifndef __ASM_GENERIC_SCATTERLIST_H
+#define __ASM_GENERIC_SCATTERLIST_H
 
-#include <asm/types.h>
+#include <linux/types.h>
 
 struct scatterlist {
 #ifdef CONFIG_DEBUG_SG
@@ -14,20 +14,30 @@ struct scatterlist {
 	unsigned int	dma_length;
 };
 
-#define ARCH_HAS_SG_CHAIN
-#define ISA_DMA_THRESHOLD (0x00ffffff)
-
 /*
- * These macros should be used after a pci_map_sg call has been done
+ * These macros should be used after a dma_map_sg call has been done
  * to get bus addresses of each of the SG entries and their lengths.
  * You should only work with the number of sg entries pci_map_sg
- * returns.
+ * returns, or alternatively stop on the first sg_dma_len(sg) which
+ * is 0.
  */
 #define sg_dma_address(sg)	((sg)->dma_address)
-#ifdef CONFIG_X86_32
-# define sg_dma_len(sg)		((sg)->length)
+#ifndef sg_dma_len
+/*
+ * Normally, you have an iommu on 64 bit machines, but not on 32 bit
+ * machines. Architectures that are differnt should override this.
+ */
+#if __BITS_PER_LONG == 64
+#define sg_dma_len(sg)		((sg)->dma_length)
 #else
-# define sg_dma_len(sg)		((sg)->dma_length)
+#define sg_dma_len(sg)		((sg)->length)
+#endif /* 64 bit */
+#endif /* sg_dma_len */
+
+#ifndef ISA_DMA_THRESHOLD
+#define ISA_DMA_THRESHOLD	(~0UL)
 #endif
 
-#endif /* _ASM_X86_SCATTERLIST_H */
+#define ARCH_HAS_SG_CHAIN
+
+#endif /* __ASM_GENERIC_SCATTERLIST_H */
diff --git a/arch/x86/include/asm/generic-types.h b/arch/x86/include/asm/generic-types.h
index 09b97745772..fba7d33ca3f 100644
--- a/arch/x86/include/asm/generic-types.h
+++ b/arch/x86/include/asm/generic-types.h
@@ -1,6 +1,9 @@
-#ifndef _ASM_X86_TYPES_H
-#define _ASM_X86_TYPES_H
-
+#ifndef _ASM_GENERIC_TYPES_H
+#define _ASM_GENERIC_TYPES_H
+/*
+ * int-ll64 is used practically everywhere now,
+ * so use it as a reasonable default.
+ */
 #include <asm-generic/int-ll64.h>
 
 #ifndef __ASSEMBLY__
@@ -13,18 +16,27 @@ typedef unsigned short umode_t;
  * These aren't exported outside the kernel to avoid name space clashes
  */
 #ifdef __KERNEL__
-
 #ifndef __ASSEMBLY__
-
-typedef u64 dma64_addr_t;
-#if defined(CONFIG_X86_64) || defined(CONFIG_HIGHMEM64G)
-/* DMA addresses come in 32-bit and 64-bit flavours. */
+/*
+ * DMA addresses may be very different from physical addresses
+ * and pointers. i386 and powerpc may have 64 bit DMA on 32 bit
+ * systems, while sparc64 uses 32 bit DMA addresses for 64 bit
+ * physical addresses.
+ * This default defines dma_addr_t to have the same size as
+ * phys_addr_t, which is the most common way.
+ * Do not define the dma64_addr_t type, which never really
+ * worked.
+ */
+#ifndef dma_addr_t
+#ifdef CONFIG_PHYS_ADDR_T_64BIT
 typedef u64 dma_addr_t;
 #else
 typedef u32 dma_addr_t;
-#endif
+#endif /* CONFIG_PHYS_ADDR_T_64BIT */
+#endif /* dma_addr_t */
 
 #endif /* __ASSEMBLY__ */
+
 #endif /* __KERNEL__ */
 
-#endif /* _ASM_X86_TYPES_H */
+#endif /* _ASM_GENERIC_TYPES_H */
diff --git a/arch/x86/include/asm/generic-ucontext.h b/arch/x86/include/asm/generic-ucontext.h
index 87324cf439d..ad77343e8a9 100644
--- a/arch/x86/include/asm/generic-ucontext.h
+++ b/arch/x86/include/asm/generic-ucontext.h
@@ -1,11 +1,5 @@
-#ifndef _ASM_X86_UCONTEXT_H
-#define _ASM_X86_UCONTEXT_H
-
-#define UC_FP_XSTATE	0x1	/* indicates the presence of extended state
-				 * information in the memory layout pointed
-				 * by the fpstate pointer in the ucontext's
-				 * sigcontext struct (uc_mcontext).
-				 */
+#ifndef __ASM_GENERIC_UCONTEXT_H
+#define __ASM_GENERIC_UCONTEXT_H
 
 struct ucontext {
 	unsigned long	  uc_flags;
@@ -15,4 +9,4 @@ struct ucontext {
 	sigset_t	  uc_sigmask;	/* mask last for extensibility */
 };
 
-#endif /* _ASM_X86_UCONTEXT_H */
+#endif /* __ASM_GENERIC_UCONTEXT_H */
diff --git a/arch/x86/include/asm/mman.h b/arch/x86/include/asm/mman.h
index 751af2550ed..063d8c9e4d6 100644
--- a/arch/x86/include/asm/mman.h
+++ b/arch/x86/include/asm/mman.h
@@ -1,20 +1,8 @@
 #ifndef _ASM_X86_MMAN_H
 #define _ASM_X86_MMAN_H
 
-#include <asm-generic/mman-common.h>
-
 #define MAP_32BIT	0x40		/* only give out 32bit addresses */
 
-#define MAP_GROWSDOWN	0x0100		/* stack-like segment */
-#define MAP_DENYWRITE	0x0800		/* ETXTBSY */
-#define MAP_EXECUTABLE	0x1000		/* mark it as an executable */
-#define MAP_LOCKED	0x2000		/* pages are locked */
-#define MAP_NORESERVE	0x4000		/* don't check for reservations */
-#define MAP_POPULATE	0x8000		/* populate (prefault) pagetables */
-#define MAP_NONBLOCK	0x10000		/* do not block on IO */
-#define MAP_STACK	0x20000		/* give out an address that is best suited for process/thread stacks */
-
-#define MCL_CURRENT	1		/* lock all current mappings */
-#define MCL_FUTURE	2		/* lock all future mappings */
+#include <asm/generic-mman.h>
 
 #endif /* _ASM_X86_MMAN_H */
diff --git a/arch/x86/include/asm/module.h b/arch/x86/include/asm/module.h
index 47d62743c4d..4a7a192910d 100644
--- a/arch/x86/include/asm/module.h
+++ b/arch/x86/include/asm/module.h
@@ -1,18 +1,7 @@
 #ifndef _ASM_X86_MODULE_H
 #define _ASM_X86_MODULE_H
 
-/* x86_32/64 are simple */
-struct mod_arch_specific {};
-
-#ifdef CONFIG_X86_32
-# define Elf_Shdr Elf32_Shdr
-# define Elf_Sym Elf32_Sym
-# define Elf_Ehdr Elf32_Ehdr
-#else
-# define Elf_Shdr Elf64_Shdr
-# define Elf_Sym Elf64_Sym
-# define Elf_Ehdr Elf64_Ehdr
-#endif
+#include <asm/generic-module.h>
 
 #ifdef CONFIG_X86_64
 /* X86_64 does not define MODULE_PROC_FAMILY */
diff --git a/arch/x86/include/asm/scatterlist.h b/arch/x86/include/asm/scatterlist.h
index 263d397d2ee..2097d686471 100644
--- a/arch/x86/include/asm/scatterlist.h
+++ b/arch/x86/include/asm/scatterlist.h
@@ -1,33 +1,8 @@
 #ifndef _ASM_X86_SCATTERLIST_H
 #define _ASM_X86_SCATTERLIST_H
 
-#include <asm/types.h>
-
-struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
-	unsigned long	sg_magic;
-#endif
-	unsigned long	page_link;
-	unsigned int	offset;
-	unsigned int	length;
-	dma_addr_t	dma_address;
-	unsigned int	dma_length;
-};
-
-#define ARCH_HAS_SG_CHAIN
 #define ISA_DMA_THRESHOLD (0x00ffffff)
 
-/*
- * These macros should be used after a pci_map_sg call has been done
- * to get bus addresses of each of the SG entries and their lengths.
- * You should only work with the number of sg entries pci_map_sg
- * returns.
- */
-#define sg_dma_address(sg)	((sg)->dma_address)
-#ifdef CONFIG_X86_32
-# define sg_dma_len(sg)		((sg)->length)
-#else
-# define sg_dma_len(sg)		((sg)->dma_length)
-#endif
+#include <asm/generic-scatterlist.h>
 
 #endif /* _ASM_X86_SCATTERLIST_H */
diff --git a/arch/x86/include/asm/types.h b/arch/x86/include/asm/types.h
index 09b97745772..f2fe528e968 100644
--- a/arch/x86/include/asm/types.h
+++ b/arch/x86/include/asm/types.h
@@ -1,19 +1,11 @@
 #ifndef _ASM_X86_TYPES_H
 #define _ASM_X86_TYPES_H
 
-#include <asm-generic/int-ll64.h>
+#define dma_addr_t	dma_addr_t
 
-#ifndef __ASSEMBLY__
-
-typedef unsigned short umode_t;
+#include <asm/generic-types.h>
 
-#endif /* __ASSEMBLY__ */
-
-/*
- * These aren't exported outside the kernel to avoid name space clashes
- */
 #ifdef __KERNEL__
-
 #ifndef __ASSEMBLY__
 
 typedef u64 dma64_addr_t;
diff --git a/arch/x86/include/asm/ucontext.h b/arch/x86/include/asm/ucontext.h
index 87324cf439d..7cfc436f86d 100644
--- a/arch/x86/include/asm/ucontext.h
+++ b/arch/x86/include/asm/ucontext.h
@@ -7,12 +7,6 @@
 				 * sigcontext struct (uc_mcontext).
 				 */
 
-struct ucontext {
-	unsigned long	  uc_flags;
-	struct ucontext  *uc_link;
-	stack_t		  uc_stack;
-	struct sigcontext uc_mcontext;
-	sigset_t	  uc_sigmask;	/* mask last for extensibility */
-};
+#include <asm/generic-ucontext.h>
 
 #endif /* _ASM_X86_UCONTEXT_H */
-- 
cgit v1.2.3


From 69d5ffdaad7b77b97229b55c36afb20e5bebd29e Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Thu, 18 Jun 2009 21:48:19 +0200
Subject: x86: convert termios.h to the asm-generic version

This patch turned out more controversial than expected
and may get dropped in the future. I'm including it
for reference anyway.

The user_termio_to_kernel_termios and kernel_termios_to_user_termio
functions on x86 are lacking error checking from get_user and
are not portable to big-endian systems, so the asm-generic
header has to differ in this regard.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
LKML-Reference: <cover.1245354003.git.arnd@arndb.de>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/include/asm/termios.h | 86 +++++++++++++++++++++++++++++++-----------
 1 file changed, 63 insertions(+), 23 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/termios.h b/arch/x86/include/asm/termios.h
index c4ee8056bac..d0922adc56d 100644
--- a/arch/x86/include/asm/termios.h
+++ b/arch/x86/include/asm/termios.h
@@ -1,5 +1,12 @@
-#ifndef _ASM_X86_TERMIOS_H
-#define _ASM_X86_TERMIOS_H
+#ifndef _ASM_GENERIC_TERMIOS_H
+#define _ASM_GENERIC_TERMIOS_H
+/*
+ * Most architectures have straight copies of the x86 code, with
+ * varying levels of bug fixes on top. Usually it's a good idea
+ * to use this generic version instead, but be careful to avoid
+ * ABI changes.
+ * New architectures should not provide their own version.
+ */
 
 #include <asm/termbits.h>
 #include <asm/ioctls.h>
@@ -54,37 +61,57 @@ struct termio {
 /*
  * Translate a "termio" structure into a "termios". Ugh.
  */
-#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \
-	unsigned short __tmp; \
-	get_user(__tmp,&(termio)->x); \
-	*(unsigned short *) &(termios)->x = __tmp; \
-}
-
 static inline int user_termio_to_kernel_termios(struct ktermios *termios,
-						struct termio __user *termio)
+						const struct termio __user *termio)
 {
-	SET_LOW_TERMIOS_BITS(termios, termio, c_iflag);
-	SET_LOW_TERMIOS_BITS(termios, termio, c_oflag);
-	SET_LOW_TERMIOS_BITS(termios, termio, c_cflag);
-	SET_LOW_TERMIOS_BITS(termios, termio, c_lflag);
-	get_user(termios->c_line, &termio->c_line);
-	return copy_from_user(termios->c_cc, termio->c_cc, NCC);
+	unsigned short tmp;
+
+	if (get_user(tmp, &termio->c_iflag) < 0)
+		goto fault;
+	termios->c_iflag = (0xffff0000 & termios->c_iflag) | tmp;
+
+	if (get_user(tmp, &termio->c_oflag) < 0)
+		goto fault;
+	termios->c_oflag = (0xffff0000 & termios->c_oflag) | tmp;
+
+	if (get_user(tmp, &termio->c_cflag) < 0)
+		goto fault;
+	termios->c_cflag = (0xffff0000 & termios->c_cflag) | tmp;
+
+	if (get_user(tmp, &termio->c_lflag) < 0)
+		goto fault;
+	termios->c_lflag = (0xffff0000 & termios->c_lflag) | tmp;
+
+	if (get_user(termios->c_line, &termio->c_line) < 0)
+		goto fault;
+
+	if (copy_from_user(termios->c_cc, termio->c_cc, NCC) != 0)
+		goto fault;
+
+	return 0;
+
+ fault:
+	return -EFAULT;
 }
 
 /*
  * Translate a "termios" structure into a "termio". Ugh.
  */
 static inline int kernel_termios_to_user_termio(struct termio __user *termio,
-					    struct ktermios *termios)
+						struct ktermios *termios)
 {
-	put_user((termios)->c_iflag, &(termio)->c_iflag);
-	put_user((termios)->c_oflag, &(termio)->c_oflag);
-	put_user((termios)->c_cflag, &(termio)->c_cflag);
-	put_user((termios)->c_lflag, &(termio)->c_lflag);
-	put_user((termios)->c_line,  &(termio)->c_line);
-	return copy_to_user((termio)->c_cc, (termios)->c_cc, NCC);
+	if (put_user(termios->c_iflag, &termio->c_iflag) < 0 ||
+	    put_user(termios->c_oflag, &termio->c_oflag) < 0 ||
+	    put_user(termios->c_cflag, &termio->c_cflag) < 0 ||
+	    put_user(termios->c_lflag, &termio->c_lflag) < 0 ||
+	    put_user(termios->c_line,  &termio->c_line) < 0 ||
+	    copy_to_user(termio->c_cc, termios->c_cc, NCC) != 0)
+		return -EFAULT;
+
+	return 0;
 }
 
+#ifdef TCGETS2
 static inline int user_termios_to_kernel_termios(struct ktermios *k,
 						 struct termios2 __user *u)
 {
@@ -108,7 +135,20 @@ static inline int kernel_termios_to_user_termios_1(struct termios __user *u,
 {
 	return copy_to_user(u, k, sizeof(struct termios));
 }
+#else /* TCGETS2 */
+static inline int user_termios_to_kernel_termios(struct ktermios *k,
+						 struct termios __user *u)
+{
+	return copy_from_user(k, u, sizeof(struct termios));
+}
+
+static inline int kernel_termios_to_user_termios(struct termios __user *u,
+						 struct ktermios *k)
+{
+	return copy_to_user(u, k, sizeof(struct termios));
+}
+#endif /* TCGETS2 */
 
 #endif	/* __KERNEL__ */
 
-#endif /* _ASM_X86_TERMIOS_H */
+#endif /* _ASM_GENERIC_TERMIOS_H */
-- 
cgit v1.2.3


From 73a2d096fdf23aa841f7595d114a11ec85a85e4d Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Thu, 18 Jun 2009 21:48:20 +0200
Subject: x86: remove all now-duplicate header files

All files that have been made identical to the asm-generic
version in the previous patches can now be removed,
guaranteeing that this does not introduce semantic changes.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
LKML-Reference: <cover.1245354003.git.arnd@arndb.de>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/include/asm/generic-mman.h        |  18 ---
 arch/x86/include/asm/generic-module.h      |  22 ----
 arch/x86/include/asm/generic-scatterlist.h |  43 -------
 arch/x86/include/asm/generic-types.h       |  42 ------
 arch/x86/include/asm/generic-ucontext.h    |  12 --
 arch/x86/include/asm/ioctls.h              | 111 +---------------
 arch/x86/include/asm/ipcbuf.h              |  34 +----
 arch/x86/include/asm/mman.h                |   2 +-
 arch/x86/include/asm/module.h              |   2 +-
 arch/x86/include/asm/msgbuf.h              |  48 +------
 arch/x86/include/asm/param.h               |  25 +---
 arch/x86/include/asm/scatterlist.h         |   2 +-
 arch/x86/include/asm/shmbuf.h              |  60 +--------
 arch/x86/include/asm/socket.h              |  61 +--------
 arch/x86/include/asm/sockios.h             |  14 +-
 arch/x86/include/asm/termbits.h            | 199 +----------------------------
 arch/x86/include/asm/termios.h             | 155 +---------------------
 arch/x86/include/asm/types.h               |   2 +-
 arch/x86/include/asm/ucontext.h            |   2 +-
 19 files changed, 14 insertions(+), 840 deletions(-)
 delete mode 100644 arch/x86/include/asm/generic-mman.h
 delete mode 100644 arch/x86/include/asm/generic-module.h
 delete mode 100644 arch/x86/include/asm/generic-scatterlist.h
 delete mode 100644 arch/x86/include/asm/generic-types.h
 delete mode 100644 arch/x86/include/asm/generic-ucontext.h

(limited to 'arch')

diff --git a/arch/x86/include/asm/generic-mman.h b/arch/x86/include/asm/generic-mman.h
deleted file mode 100644
index 7cab4de2bca..00000000000
--- a/arch/x86/include/asm/generic-mman.h
+++ /dev/null
@@ -1,18 +0,0 @@
-#ifndef __ASM_GENERIC_MMAN_H
-#define __ASM_GENERIC_MMAN_H
-
-#include <asm-generic/mman-common.h>
-
-#define MAP_GROWSDOWN	0x0100		/* stack-like segment */
-#define MAP_DENYWRITE	0x0800		/* ETXTBSY */
-#define MAP_EXECUTABLE	0x1000		/* mark it as an executable */
-#define MAP_LOCKED	0x2000		/* pages are locked */
-#define MAP_NORESERVE	0x4000		/* don't check for reservations */
-#define MAP_POPULATE	0x8000		/* populate (prefault) pagetables */
-#define MAP_NONBLOCK	0x10000		/* do not block on IO */
-#define MAP_STACK	0x20000		/* give out an address that is best suited for process/thread stacks */
-
-#define MCL_CURRENT	1		/* lock all current mappings */
-#define MCL_FUTURE	2		/* lock all future mappings */
-
-#endif /* __ASM_GENERIC_MMAN_H */
diff --git a/arch/x86/include/asm/generic-module.h b/arch/x86/include/asm/generic-module.h
deleted file mode 100644
index ed5b44de4c9..00000000000
--- a/arch/x86/include/asm/generic-module.h
+++ /dev/null
@@ -1,22 +0,0 @@
-#ifndef __ASM_GENERIC_MODULE_H
-#define __ASM_GENERIC_MODULE_H
-
-/*
- * Many architectures just need a simple module
- * loader without arch specific data.
- */
-struct mod_arch_specific
-{
-};
-
-#ifdef CONFIG_64BIT
-#define Elf_Shdr Elf64_Shdr
-#define Elf_Sym Elf64_Sym
-#define Elf_Ehdr Elf64_Ehdr
-#else
-#define Elf_Shdr Elf32_Shdr
-#define Elf_Sym Elf32_Sym
-#define Elf_Ehdr Elf32_Ehdr
-#endif
-
-#endif /* __ASM_GENERIC_MODULE_H */
diff --git a/arch/x86/include/asm/generic-scatterlist.h b/arch/x86/include/asm/generic-scatterlist.h
deleted file mode 100644
index 8b9454496a7..00000000000
--- a/arch/x86/include/asm/generic-scatterlist.h
+++ /dev/null
@@ -1,43 +0,0 @@
-#ifndef __ASM_GENERIC_SCATTERLIST_H
-#define __ASM_GENERIC_SCATTERLIST_H
-
-#include <linux/types.h>
-
-struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
-	unsigned long	sg_magic;
-#endif
-	unsigned long	page_link;
-	unsigned int	offset;
-	unsigned int	length;
-	dma_addr_t	dma_address;
-	unsigned int	dma_length;
-};
-
-/*
- * These macros should be used after a dma_map_sg call has been done
- * to get bus addresses of each of the SG entries and their lengths.
- * You should only work with the number of sg entries pci_map_sg
- * returns, or alternatively stop on the first sg_dma_len(sg) which
- * is 0.
- */
-#define sg_dma_address(sg)	((sg)->dma_address)
-#ifndef sg_dma_len
-/*
- * Normally, you have an iommu on 64 bit machines, but not on 32 bit
- * machines. Architectures that are differnt should override this.
- */
-#if __BITS_PER_LONG == 64
-#define sg_dma_len(sg)		((sg)->dma_length)
-#else
-#define sg_dma_len(sg)		((sg)->length)
-#endif /* 64 bit */
-#endif /* sg_dma_len */
-
-#ifndef ISA_DMA_THRESHOLD
-#define ISA_DMA_THRESHOLD	(~0UL)
-#endif
-
-#define ARCH_HAS_SG_CHAIN
-
-#endif /* __ASM_GENERIC_SCATTERLIST_H */
diff --git a/arch/x86/include/asm/generic-types.h b/arch/x86/include/asm/generic-types.h
deleted file mode 100644
index fba7d33ca3f..00000000000
--- a/arch/x86/include/asm/generic-types.h
+++ /dev/null
@@ -1,42 +0,0 @@
-#ifndef _ASM_GENERIC_TYPES_H
-#define _ASM_GENERIC_TYPES_H
-/*
- * int-ll64 is used practically everywhere now,
- * so use it as a reasonable default.
- */
-#include <asm-generic/int-ll64.h>
-
-#ifndef __ASSEMBLY__
-
-typedef unsigned short umode_t;
-
-#endif /* __ASSEMBLY__ */
-
-/*
- * These aren't exported outside the kernel to avoid name space clashes
- */
-#ifdef __KERNEL__
-#ifndef __ASSEMBLY__
-/*
- * DMA addresses may be very different from physical addresses
- * and pointers. i386 and powerpc may have 64 bit DMA on 32 bit
- * systems, while sparc64 uses 32 bit DMA addresses for 64 bit
- * physical addresses.
- * This default defines dma_addr_t to have the same size as
- * phys_addr_t, which is the most common way.
- * Do not define the dma64_addr_t type, which never really
- * worked.
- */
-#ifndef dma_addr_t
-#ifdef CONFIG_PHYS_ADDR_T_64BIT
-typedef u64 dma_addr_t;
-#else
-typedef u32 dma_addr_t;
-#endif /* CONFIG_PHYS_ADDR_T_64BIT */
-#endif /* dma_addr_t */
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_GENERIC_TYPES_H */
diff --git a/arch/x86/include/asm/generic-ucontext.h b/arch/x86/include/asm/generic-ucontext.h
deleted file mode 100644
index ad77343e8a9..00000000000
--- a/arch/x86/include/asm/generic-ucontext.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef __ASM_GENERIC_UCONTEXT_H
-#define __ASM_GENERIC_UCONTEXT_H
-
-struct ucontext {
-	unsigned long	  uc_flags;
-	struct ucontext  *uc_link;
-	stack_t		  uc_stack;
-	struct sigcontext uc_mcontext;
-	sigset_t	  uc_sigmask;	/* mask last for extensibility */
-};
-
-#endif /* __ASM_GENERIC_UCONTEXT_H */
diff --git a/arch/x86/include/asm/ioctls.h b/arch/x86/include/asm/ioctls.h
index a799e20a769..ec34c760665 100644
--- a/arch/x86/include/asm/ioctls.h
+++ b/arch/x86/include/asm/ioctls.h
@@ -1,110 +1 @@
-#ifndef __ASM_GENERIC_IOCTLS_H
-#define __ASM_GENERIC_IOCTLS_H
-
-#include <linux/ioctl.h>
-
-/*
- * These are the most common definitions for tty ioctl numbers.
- * Most of them do not use the recommended _IOC(), but there is
- * probably some source code out there hardcoding the number,
- * so we might as well use them for all new platforms.
- *
- * The architectures that use different values here typically
- * try to be compatible with some Unix variants for the same
- * architecture.
- */
-
-/* 0x54 is just a magic number to make these relatively unique ('T') */
-
-#define TCGETS		0x5401
-#define TCSETS		0x5402
-#define TCSETSW		0x5403
-#define TCSETSF		0x5404
-#define TCGETA		0x5405
-#define TCSETA		0x5406
-#define TCSETAW		0x5407
-#define TCSETAF		0x5408
-#define TCSBRK		0x5409
-#define TCXONC		0x540A
-#define TCFLSH		0x540B
-#define TIOCEXCL	0x540C
-#define TIOCNXCL	0x540D
-#define TIOCSCTTY	0x540E
-#define TIOCGPGRP	0x540F
-#define TIOCSPGRP	0x5410
-#define TIOCOUTQ	0x5411
-#define TIOCSTI		0x5412
-#define TIOCGWINSZ	0x5413
-#define TIOCSWINSZ	0x5414
-#define TIOCMGET	0x5415
-#define TIOCMBIS	0x5416
-#define TIOCMBIC	0x5417
-#define TIOCMSET	0x5418
-#define TIOCGSOFTCAR	0x5419
-#define TIOCSSOFTCAR	0x541A
-#define FIONREAD	0x541B
-#define TIOCINQ		FIONREAD
-#define TIOCLINUX	0x541C
-#define TIOCCONS	0x541D
-#define TIOCGSERIAL	0x541E
-#define TIOCSSERIAL	0x541F
-#define TIOCPKT		0x5420
-#define FIONBIO		0x5421
-#define TIOCNOTTY	0x5422
-#define TIOCSETD	0x5423
-#define TIOCGETD	0x5424
-#define TCSBRKP		0x5425	/* Needed for POSIX tcsendbreak() */
-#define TIOCSBRK	0x5427  /* BSD compatibility */
-#define TIOCCBRK	0x5428  /* BSD compatibility */
-#define TIOCGSID	0x5429  /* Return the session ID of FD */
-#define TCGETS2		_IOR('T', 0x2A, struct termios2)
-#define TCSETS2		_IOW('T', 0x2B, struct termios2)
-#define TCSETSW2	_IOW('T', 0x2C, struct termios2)
-#define TCSETSF2	_IOW('T', 0x2D, struct termios2)
-#define TIOCGRS485	0x542E
-#define TIOCSRS485	0x542F
-#define TIOCGPTN	_IOR('T', 0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
-#define TIOCSPTLCK	_IOW('T', 0x31, int)  /* Lock/unlock Pty */
-#define TCGETX		0x5432 /* SYS5 TCGETX compatibility */
-#define TCSETX		0x5433
-#define TCSETXF		0x5434
-#define TCSETXW		0x5435
-
-#define FIONCLEX	0x5450
-#define FIOCLEX		0x5451
-#define FIOASYNC	0x5452
-#define TIOCSERCONFIG	0x5453
-#define TIOCSERGWILD	0x5454
-#define TIOCSERSWILD	0x5455
-#define TIOCGLCKTRMIOS	0x5456
-#define TIOCSLCKTRMIOS	0x5457
-#define TIOCSERGSTRUCT	0x5458 /* For debugging only */
-#define TIOCSERGETLSR   0x5459 /* Get line status register */
-#define TIOCSERGETMULTI 0x545A /* Get multiport config  */
-#define TIOCSERSETMULTI 0x545B /* Set multiport config */
-
-#define TIOCMIWAIT	0x545C	/* wait for a change on serial input line(s) */
-#define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
-
-/*
- * some architectures define FIOQSIZE as 0x545E, which is used for
- * TIOCGHAYESESP on others
- */
-#ifndef FIOQSIZE
-# define TIOCGHAYESESP	0x545E  /* Get Hayes ESP configuration */
-# define TIOCSHAYESESP	0x545F  /* Set Hayes ESP configuration */
-# define FIOQSIZE	0x5460
-#endif
-
-/* Used for packet mode */
-#define TIOCPKT_DATA		 0
-#define TIOCPKT_FLUSHREAD	 1
-#define TIOCPKT_FLUSHWRITE	 2
-#define TIOCPKT_STOP		 4
-#define TIOCPKT_START		 8
-#define TIOCPKT_NOSTOP		16
-#define TIOCPKT_DOSTOP		32
-
-#define TIOCSER_TEMT	0x01	/* Transmitter physically empty */
-
-#endif /* __ASM_GENERIC_IOCTLS_H */
+#include <asm-generic/ioctls.h>
diff --git a/arch/x86/include/asm/ipcbuf.h b/arch/x86/include/asm/ipcbuf.h
index 888ca1c8f95..84c7e51cb6d 100644
--- a/arch/x86/include/asm/ipcbuf.h
+++ b/arch/x86/include/asm/ipcbuf.h
@@ -1,33 +1 @@
-#ifndef __ASM_GENERIC_IPCBUF_H
-#define __ASM_GENERIC_IPCBUF_H
-
-/*
- * The generic ipc64_perm structure:
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * ipc64_perm was originally meant to be architecture specific, but
- * everyone just ended up making identical copies without specific
- * optimizations, so we may just as well all use the same one.
- *
- * Pad space is left for:
- * - 32-bit mode_t on architectures that only had 16 bit
- * - 32-bit seq
- * - 2 miscellaneous 32-bit values
- */
-
-struct ipc64_perm {
-	__kernel_key_t		key;
-	__kernel_uid32_t	uid;
-	__kernel_gid32_t	gid;
-	__kernel_uid32_t	cuid;
-	__kernel_gid32_t	cgid;
-	__kernel_mode_t		mode;
-	unsigned short		__pad1;
-	unsigned short		seq;
-	unsigned short		__pad2;
-	unsigned long		__unused1;
-	unsigned long		__unused2;
-};
-
-#endif /* __ASM_GENERIC_IPCBUF_H */
+#include <asm-generic/ipcbuf.h>
diff --git a/arch/x86/include/asm/mman.h b/arch/x86/include/asm/mman.h
index 063d8c9e4d6..593e51d4643 100644
--- a/arch/x86/include/asm/mman.h
+++ b/arch/x86/include/asm/mman.h
@@ -3,6 +3,6 @@
 
 #define MAP_32BIT	0x40		/* only give out 32bit addresses */
 
-#include <asm/generic-mman.h>
+#include <asm-generic/mman.h>
 
 #endif /* _ASM_X86_MMAN_H */
diff --git a/arch/x86/include/asm/module.h b/arch/x86/include/asm/module.h
index 4a7a192910d..555bc12bdcd 100644
--- a/arch/x86/include/asm/module.h
+++ b/arch/x86/include/asm/module.h
@@ -1,7 +1,7 @@
 #ifndef _ASM_X86_MODULE_H
 #define _ASM_X86_MODULE_H
 
-#include <asm/generic-module.h>
+#include <asm-generic/module.h>
 
 #ifdef CONFIG_X86_64
 /* X86_64 does not define MODULE_PROC_FAMILY */
diff --git a/arch/x86/include/asm/msgbuf.h b/arch/x86/include/asm/msgbuf.h
index aec850d9159..809134c644a 100644
--- a/arch/x86/include/asm/msgbuf.h
+++ b/arch/x86/include/asm/msgbuf.h
@@ -1,47 +1 @@
-#ifndef __ASM_GENERIC_MSGBUF_H
-#define __ASM_GENERIC_MSGBUF_H
-
-#include <asm/bitsperlong.h>
-/*
- * generic msqid64_ds structure.
- *
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * msqid64_ds was originally meant to be architecture specific, but
- * everyone just ended up making identical copies without specific
- * optimizations, so we may just as well all use the same one.
- *
- * 64 bit architectures typically define a 64 bit __kernel_time_t,
- * so they do not need the first three padding words.
- * On big-endian systems, the padding is in the wrong place.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct msqid64_ds {
-	struct ipc64_perm msg_perm;
-	__kernel_time_t msg_stime;	/* last msgsnd time */
-#if __BITS_PER_LONG != 64
-	unsigned long	__unused1;
-#endif
-	__kernel_time_t msg_rtime;	/* last msgrcv time */
-#if __BITS_PER_LONG != 64
-	unsigned long	__unused2;
-#endif
-	__kernel_time_t msg_ctime;	/* last change time */
-#if __BITS_PER_LONG != 64
-	unsigned long	__unused3;
-#endif
-	unsigned long  msg_cbytes;	/* current number of bytes on queue */
-	unsigned long  msg_qnum;	/* number of messages in queue */
-	unsigned long  msg_qbytes;	/* max number of bytes on queue */
-	__kernel_pid_t msg_lspid;	/* pid of last msgsnd */
-	__kernel_pid_t msg_lrpid;	/* last receive pid */
-	unsigned long  __unused4;
-	unsigned long  __unused5;
-};
-
-#endif /* __ASM_GENERIC_MSGBUF_H */
+#include <asm-generic/msgbuf.h>
diff --git a/arch/x86/include/asm/param.h b/arch/x86/include/asm/param.h
index cdf8251bfb6..965d4542797 100644
--- a/arch/x86/include/asm/param.h
+++ b/arch/x86/include/asm/param.h
@@ -1,24 +1 @@
-#ifndef __ASM_GENERIC_PARAM_H
-#define __ASM_GENERIC_PARAM_H
-
-#ifdef __KERNEL__
-# define HZ		CONFIG_HZ	/* Internal kernel timer frequency */
-# define USER_HZ	100		/* some user interfaces are */
-# define CLOCKS_PER_SEC	(USER_HZ)       /* in "ticks" like times() */
-#endif
-
-#ifndef HZ
-#define HZ 100
-#endif
-
-#ifndef EXEC_PAGESIZE
-#define EXEC_PAGESIZE	4096
-#endif
-
-#ifndef NOGROUP
-#define NOGROUP		(-1)
-#endif
-
-#define MAXHOSTNAMELEN	64	/* max length of hostname */
-
-#endif /* __ASM_GENERIC_PARAM_H */
+#include <asm-generic/param.h>
diff --git a/arch/x86/include/asm/scatterlist.h b/arch/x86/include/asm/scatterlist.h
index 2097d686471..75af592677e 100644
--- a/arch/x86/include/asm/scatterlist.h
+++ b/arch/x86/include/asm/scatterlist.h
@@ -3,6 +3,6 @@
 
 #define ISA_DMA_THRESHOLD (0x00ffffff)
 
-#include <asm/generic-scatterlist.h>
+#include <asm-generic/scatterlist.h>
 
 #endif /* _ASM_X86_SCATTERLIST_H */
diff --git a/arch/x86/include/asm/shmbuf.h b/arch/x86/include/asm/shmbuf.h
index 5768fa60ac8..83c05fc2de3 100644
--- a/arch/x86/include/asm/shmbuf.h
+++ b/arch/x86/include/asm/shmbuf.h
@@ -1,59 +1 @@
-#ifndef __ASM_GENERIC_SHMBUF_H
-#define __ASM_GENERIC_SHMBUF_H
-
-#include <asm/bitsperlong.h>
-
-/*
- * The shmid64_ds structure for x86 architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * shmid64_ds was originally meant to be architecture specific, but
- * everyone just ended up making identical copies without specific
- * optimizations, so we may just as well all use the same one.
- *
- * 64 bit architectures typically define a 64 bit __kernel_time_t,
- * so they do not need the first two padding words.
- * On big-endian systems, the padding is in the wrong place.
- *
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct shmid64_ds {
-	struct ipc64_perm	shm_perm;	/* operation perms */
-	size_t			shm_segsz;	/* size of segment (bytes) */
-	__kernel_time_t		shm_atime;	/* last attach time */
-#if __BITS_PER_LONG != 64
-	unsigned long		__unused1;
-#endif
-	__kernel_time_t		shm_dtime;	/* last detach time */
-#if __BITS_PER_LONG != 64
-	unsigned long		__unused2;
-#endif
-	__kernel_time_t		shm_ctime;	/* last change time */
-#if __BITS_PER_LONG != 64
-	unsigned long		__unused3;
-#endif
-	__kernel_pid_t		shm_cpid;	/* pid of creator */
-	__kernel_pid_t		shm_lpid;	/* pid of last operator */
-	unsigned long		shm_nattch;	/* no. of current attaches */
-	unsigned long		__unused4;
-	unsigned long		__unused5;
-};
-
-struct shminfo64 {
-	unsigned long	shmmax;
-	unsigned long	shmmin;
-	unsigned long	shmmni;
-	unsigned long	shmseg;
-	unsigned long	shmall;
-	unsigned long	__unused1;
-	unsigned long	__unused2;
-	unsigned long	__unused3;
-	unsigned long	__unused4;
-};
-
-#endif /* __ASM_GENERIC_SHMBUF_H */
+#include <asm-generic/shmbuf.h>
diff --git a/arch/x86/include/asm/socket.h b/arch/x86/include/asm/socket.h
index d4ae42a06a2..6b71384b9d8 100644
--- a/arch/x86/include/asm/socket.h
+++ b/arch/x86/include/asm/socket.h
@@ -1,60 +1 @@
-#ifndef __ASM_GENERIC_SOCKET_H
-#define __ASM_GENERIC_SOCKET_H
-
-#include <asm/sockios.h>
-
-/* For setsockopt(2) */
-#define SOL_SOCKET	1
-
-#define SO_DEBUG	1
-#define SO_REUSEADDR	2
-#define SO_TYPE		3
-#define SO_ERROR	4
-#define SO_DONTROUTE	5
-#define SO_BROADCAST	6
-#define SO_SNDBUF	7
-#define SO_RCVBUF	8
-#define SO_SNDBUFFORCE	32
-#define SO_RCVBUFFORCE	33
-#define SO_KEEPALIVE	9
-#define SO_OOBINLINE	10
-#define SO_NO_CHECK	11
-#define SO_PRIORITY	12
-#define SO_LINGER	13
-#define SO_BSDCOMPAT	14
-/* To add :#define SO_REUSEPORT 15 */
-#define SO_PASSCRED	16
-#define SO_PEERCRED	17
-#define SO_RCVLOWAT	18
-#define SO_SNDLOWAT	19
-#define SO_RCVTIMEO	20
-#define SO_SNDTIMEO	21
-
-/* Security levels - as per NRL IPv6 - don't actually do anything */
-#define SO_SECURITY_AUTHENTICATION		22
-#define SO_SECURITY_ENCRYPTION_TRANSPORT	23
-#define SO_SECURITY_ENCRYPTION_NETWORK		24
-
-#define SO_BINDTODEVICE	25
-
-/* Socket filtering */
-#define SO_ATTACH_FILTER	26
-#define SO_DETACH_FILTER	27
-
-#define SO_PEERNAME		28
-#define SO_TIMESTAMP		29
-#define SCM_TIMESTAMP		SO_TIMESTAMP
-
-#define SO_ACCEPTCONN		30
-
-#define SO_PEERSEC		31
-#define SO_PASSSEC		34
-#define SO_TIMESTAMPNS		35
-#define SCM_TIMESTAMPNS		SO_TIMESTAMPNS
-
-#define SO_MARK			36
-
-#define SO_TIMESTAMPING		37
-#define SCM_TIMESTAMPING	SO_TIMESTAMPING
-
-#endif /* __ASM_GENERIC_SOCKET_H */
+#include <asm-generic/socket.h>
diff --git a/arch/x86/include/asm/sockios.h b/arch/x86/include/asm/sockios.h
index 9a61a369b90..def6d4746ee 100644
--- a/arch/x86/include/asm/sockios.h
+++ b/arch/x86/include/asm/sockios.h
@@ -1,13 +1 @@
-#ifndef __ASM_GENERIC_SOCKIOS_H
-#define __ASM_GENERIC_SOCKIOS_H
-
-/* Socket-level I/O control calls. */
-#define FIOSETOWN	0x8901
-#define SIOCSPGRP	0x8902
-#define FIOGETOWN	0x8903
-#define SIOCGPGRP	0x8904
-#define SIOCATMARK	0x8905
-#define SIOCGSTAMP	0x8906		/* Get stamp (timeval) */
-#define SIOCGSTAMPNS	0x8907		/* Get stamp (timespec) */
-
-#endif /* __ASM_GENERIC_SOCKIOS_H */
+#include <asm-generic/sockios.h>
diff --git a/arch/x86/include/asm/termbits.h b/arch/x86/include/asm/termbits.h
index 1c9773d48cb..3935b106de7 100644
--- a/arch/x86/include/asm/termbits.h
+++ b/arch/x86/include/asm/termbits.h
@@ -1,198 +1 @@
-#ifndef __ASM_GENERIC_TERMBITS_H
-#define __ASM_GENERIC_TERMBITS_H
-
-#include <linux/posix_types.h>
-
-typedef unsigned char	cc_t;
-typedef unsigned int	speed_t;
-typedef unsigned int	tcflag_t;
-
-#define NCCS 19
-struct termios {
-	tcflag_t c_iflag;		/* input mode flags */
-	tcflag_t c_oflag;		/* output mode flags */
-	tcflag_t c_cflag;		/* control mode flags */
-	tcflag_t c_lflag;		/* local mode flags */
-	cc_t c_line;			/* line discipline */
-	cc_t c_cc[NCCS];		/* control characters */
-};
-
-struct termios2 {
-	tcflag_t c_iflag;		/* input mode flags */
-	tcflag_t c_oflag;		/* output mode flags */
-	tcflag_t c_cflag;		/* control mode flags */
-	tcflag_t c_lflag;		/* local mode flags */
-	cc_t c_line;			/* line discipline */
-	cc_t c_cc[NCCS];		/* control characters */
-	speed_t c_ispeed;		/* input speed */
-	speed_t c_ospeed;		/* output speed */
-};
-
-struct ktermios {
-	tcflag_t c_iflag;		/* input mode flags */
-	tcflag_t c_oflag;		/* output mode flags */
-	tcflag_t c_cflag;		/* control mode flags */
-	tcflag_t c_lflag;		/* local mode flags */
-	cc_t c_line;			/* line discipline */
-	cc_t c_cc[NCCS];		/* control characters */
-	speed_t c_ispeed;		/* input speed */
-	speed_t c_ospeed;		/* output speed */
-};
-
-/* c_cc characters */
-#define VINTR 0
-#define VQUIT 1
-#define VERASE 2
-#define VKILL 3
-#define VEOF 4
-#define VTIME 5
-#define VMIN 6
-#define VSWTC 7
-#define VSTART 8
-#define VSTOP 9
-#define VSUSP 10
-#define VEOL 11
-#define VREPRINT 12
-#define VDISCARD 13
-#define VWERASE 14
-#define VLNEXT 15
-#define VEOL2 16
-
-/* c_iflag bits */
-#define IGNBRK	0000001
-#define BRKINT	0000002
-#define IGNPAR	0000004
-#define PARMRK	0000010
-#define INPCK	0000020
-#define ISTRIP	0000040
-#define INLCR	0000100
-#define IGNCR	0000200
-#define ICRNL	0000400
-#define IUCLC	0001000
-#define IXON	0002000
-#define IXANY	0004000
-#define IXOFF	0010000
-#define IMAXBEL	0020000
-#define IUTF8	0040000
-
-/* c_oflag bits */
-#define OPOST	0000001
-#define OLCUC	0000002
-#define ONLCR	0000004
-#define OCRNL	0000010
-#define ONOCR	0000020
-#define ONLRET	0000040
-#define OFILL	0000100
-#define OFDEL	0000200
-#define NLDLY	0000400
-#define   NL0	0000000
-#define   NL1	0000400
-#define CRDLY	0003000
-#define   CR0	0000000
-#define   CR1	0001000
-#define   CR2	0002000
-#define   CR3	0003000
-#define TABDLY	0014000
-#define   TAB0	0000000
-#define   TAB1	0004000
-#define   TAB2	0010000
-#define   TAB3	0014000
-#define   XTABS	0014000
-#define BSDLY	0020000
-#define   BS0	0000000
-#define   BS1	0020000
-#define VTDLY	0040000
-#define   VT0	0000000
-#define   VT1	0040000
-#define FFDLY	0100000
-#define   FF0	0000000
-#define   FF1	0100000
-
-/* c_cflag bit meaning */
-#define CBAUD	0010017
-#define  B0	0000000		/* hang up */
-#define  B50	0000001
-#define  B75	0000002
-#define  B110	0000003
-#define  B134	0000004
-#define  B150	0000005
-#define  B200	0000006
-#define  B300	0000007
-#define  B600	0000010
-#define  B1200	0000011
-#define  B1800	0000012
-#define  B2400	0000013
-#define  B4800	0000014
-#define  B9600	0000015
-#define  B19200	0000016
-#define  B38400	0000017
-#define EXTA B19200
-#define EXTB B38400
-#define CSIZE	0000060
-#define   CS5	0000000
-#define   CS6	0000020
-#define   CS7	0000040
-#define   CS8	0000060
-#define CSTOPB	0000100
-#define CREAD	0000200
-#define PARENB	0000400
-#define PARODD	0001000
-#define HUPCL	0002000
-#define CLOCAL	0004000
-#define CBAUDEX 0010000
-#define    BOTHER 0010000
-#define    B57600 0010001
-#define   B115200 0010002
-#define   B230400 0010003
-#define   B460800 0010004
-#define   B500000 0010005
-#define   B576000 0010006
-#define   B921600 0010007
-#define  B1000000 0010010
-#define  B1152000 0010011
-#define  B1500000 0010012
-#define  B2000000 0010013
-#define  B2500000 0010014
-#define  B3000000 0010015
-#define  B3500000 0010016
-#define  B4000000 0010017
-#define CIBAUD	  002003600000	/* input baud rate */
-#define CMSPAR	  010000000000	/* mark or space (stick) parity */
-#define CRTSCTS	  020000000000	/* flow control */
-
-#define IBSHIFT	  16		/* Shift from CBAUD to CIBAUD */
-
-/* c_lflag bits */
-#define ISIG	0000001
-#define ICANON	0000002
-#define XCASE	0000004
-#define ECHO	0000010
-#define ECHOE	0000020
-#define ECHOK	0000040
-#define ECHONL	0000100
-#define NOFLSH	0000200
-#define TOSTOP	0000400
-#define ECHOCTL	0001000
-#define ECHOPRT	0002000
-#define ECHOKE	0004000
-#define FLUSHO	0010000
-#define PENDIN	0040000
-#define IEXTEN	0100000
-
-/* tcflow() and TCXONC use these */
-#define	TCOOFF		0
-#define	TCOON		1
-#define	TCIOFF		2
-#define	TCION		3
-
-/* tcflush() and TCFLSH use these */
-#define	TCIFLUSH	0
-#define	TCOFLUSH	1
-#define	TCIOFLUSH	2
-
-/* tcsetattr uses these */
-#define	TCSANOW		0
-#define	TCSADRAIN	1
-#define	TCSAFLUSH	2
-
-#endif /* __ASM_GENERIC_TERMBITS_H */
+#include <asm-generic/termbits.h>
diff --git a/arch/x86/include/asm/termios.h b/arch/x86/include/asm/termios.h
index d0922adc56d..280d78a9d96 100644
--- a/arch/x86/include/asm/termios.h
+++ b/arch/x86/include/asm/termios.h
@@ -1,154 +1 @@
-#ifndef _ASM_GENERIC_TERMIOS_H
-#define _ASM_GENERIC_TERMIOS_H
-/*
- * Most architectures have straight copies of the x86 code, with
- * varying levels of bug fixes on top. Usually it's a good idea
- * to use this generic version instead, but be careful to avoid
- * ABI changes.
- * New architectures should not provide their own version.
- */
-
-#include <asm/termbits.h>
-#include <asm/ioctls.h>
-
-struct winsize {
-	unsigned short ws_row;
-	unsigned short ws_col;
-	unsigned short ws_xpixel;
-	unsigned short ws_ypixel;
-};
-
-#define NCC 8
-struct termio {
-	unsigned short c_iflag;		/* input mode flags */
-	unsigned short c_oflag;		/* output mode flags */
-	unsigned short c_cflag;		/* control mode flags */
-	unsigned short c_lflag;		/* local mode flags */
-	unsigned char c_line;		/* line discipline */
-	unsigned char c_cc[NCC];	/* control characters */
-};
-
-/* modem lines */
-#define TIOCM_LE	0x001
-#define TIOCM_DTR	0x002
-#define TIOCM_RTS	0x004
-#define TIOCM_ST	0x008
-#define TIOCM_SR	0x010
-#define TIOCM_CTS	0x020
-#define TIOCM_CAR	0x040
-#define TIOCM_RNG	0x080
-#define TIOCM_DSR	0x100
-#define TIOCM_CD	TIOCM_CAR
-#define TIOCM_RI	TIOCM_RNG
-#define TIOCM_OUT1	0x2000
-#define TIOCM_OUT2	0x4000
-#define TIOCM_LOOP	0x8000
-
-/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
-
-#ifdef __KERNEL__
-
-#include <asm/uaccess.h>
-
-/*	intr=^C		quit=^\		erase=del	kill=^U
-	eof=^D		vtime=\0	vmin=\1		sxtc=\0
-	start=^Q	stop=^S		susp=^Z		eol=\0
-	reprint=^R	discard=^U	werase=^W	lnext=^V
-	eol2=\0
-*/
-#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
-
-/*
- * Translate a "termio" structure into a "termios". Ugh.
- */
-static inline int user_termio_to_kernel_termios(struct ktermios *termios,
-						const struct termio __user *termio)
-{
-	unsigned short tmp;
-
-	if (get_user(tmp, &termio->c_iflag) < 0)
-		goto fault;
-	termios->c_iflag = (0xffff0000 & termios->c_iflag) | tmp;
-
-	if (get_user(tmp, &termio->c_oflag) < 0)
-		goto fault;
-	termios->c_oflag = (0xffff0000 & termios->c_oflag) | tmp;
-
-	if (get_user(tmp, &termio->c_cflag) < 0)
-		goto fault;
-	termios->c_cflag = (0xffff0000 & termios->c_cflag) | tmp;
-
-	if (get_user(tmp, &termio->c_lflag) < 0)
-		goto fault;
-	termios->c_lflag = (0xffff0000 & termios->c_lflag) | tmp;
-
-	if (get_user(termios->c_line, &termio->c_line) < 0)
-		goto fault;
-
-	if (copy_from_user(termios->c_cc, termio->c_cc, NCC) != 0)
-		goto fault;
-
-	return 0;
-
- fault:
-	return -EFAULT;
-}
-
-/*
- * Translate a "termios" structure into a "termio". Ugh.
- */
-static inline int kernel_termios_to_user_termio(struct termio __user *termio,
-						struct ktermios *termios)
-{
-	if (put_user(termios->c_iflag, &termio->c_iflag) < 0 ||
-	    put_user(termios->c_oflag, &termio->c_oflag) < 0 ||
-	    put_user(termios->c_cflag, &termio->c_cflag) < 0 ||
-	    put_user(termios->c_lflag, &termio->c_lflag) < 0 ||
-	    put_user(termios->c_line,  &termio->c_line) < 0 ||
-	    copy_to_user(termio->c_cc, termios->c_cc, NCC) != 0)
-		return -EFAULT;
-
-	return 0;
-}
-
-#ifdef TCGETS2
-static inline int user_termios_to_kernel_termios(struct ktermios *k,
-						 struct termios2 __user *u)
-{
-	return copy_from_user(k, u, sizeof(struct termios2));
-}
-
-static inline int kernel_termios_to_user_termios(struct termios2 __user *u,
-						 struct ktermios *k)
-{
-	return copy_to_user(u, k, sizeof(struct termios2));
-}
-
-static inline int user_termios_to_kernel_termios_1(struct ktermios *k,
-						   struct termios __user *u)
-{
-	return copy_from_user(k, u, sizeof(struct termios));
-}
-
-static inline int kernel_termios_to_user_termios_1(struct termios __user *u,
-						   struct ktermios *k)
-{
-	return copy_to_user(u, k, sizeof(struct termios));
-}
-#else /* TCGETS2 */
-static inline int user_termios_to_kernel_termios(struct ktermios *k,
-						 struct termios __user *u)
-{
-	return copy_from_user(k, u, sizeof(struct termios));
-}
-
-static inline int kernel_termios_to_user_termios(struct termios __user *u,
-						 struct ktermios *k)
-{
-	return copy_to_user(u, k, sizeof(struct termios));
-}
-#endif /* TCGETS2 */
-
-#endif	/* __KERNEL__ */
-
-#endif /* _ASM_GENERIC_TERMIOS_H */
+#include <asm-generic/termios.h>
diff --git a/arch/x86/include/asm/types.h b/arch/x86/include/asm/types.h
index f2fe528e968..df1da20f453 100644
--- a/arch/x86/include/asm/types.h
+++ b/arch/x86/include/asm/types.h
@@ -3,7 +3,7 @@
 
 #define dma_addr_t	dma_addr_t
 
-#include <asm/generic-types.h>
+#include <asm-generic/types.h>
 
 #ifdef __KERNEL__
 #ifndef __ASSEMBLY__
diff --git a/arch/x86/include/asm/ucontext.h b/arch/x86/include/asm/ucontext.h
index 7cfc436f86d..b7c29c8017f 100644
--- a/arch/x86/include/asm/ucontext.h
+++ b/arch/x86/include/asm/ucontext.h
@@ -7,6 +7,6 @@
 				 * sigcontext struct (uc_mcontext).
 				 */
 
-#include <asm/generic-ucontext.h>
+#include <asm-generic/ucontext.h>
 
 #endif /* _ASM_X86_UCONTEXT_H */
-- 
cgit v1.2.3


From feaa0457ec8351cae855edc9a3052ac49322538e Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinder@kernel.org>
Date: Sat, 20 Jun 2009 16:15:40 +0530
Subject: x86: ds.c fix invalid assignment

Fixes the type mixups that cause the following sparse warnings:

  CHECK   arch/x86/kernel/ds.c
arch/x86/kernel/ds.c:549:19: warning: incorrect type in argument 2 (invalid types)
arch/x86/kernel/ds.c:549:19:    expected bad type enum bts_field field
arch/x86/kernel/ds.c:549:19:    got int
arch/x86/kernel/ds.c:514:35: error: incompatible types for operation (*)
arch/x86/kernel/ds.c:514:35:    left side has type unsigned char static [unsigned] [toplevel] sizeof_ptr_field
arch/x86/kernel/ds.c:514:35:    right side has type bad type enum bts_field field
arch/x86/kernel/ds.c:514:7: error: invalid assignment
arch/x86/kernel/ds.c:514:35: error: incompatible types for operation (*)
arch/x86/kernel/ds.c:514:35:    left side has type unsigned char static [unsigned] [toplevel] sizeof_ptr_field
arch/x86/kernel/ds.c:514:35:    right side has type bad type enum bts_field field
arch/x86/kernel/ds.c:514:7: error: invalid assignment
arch/x86/kernel/ds.c:514:35: error: incompatible types for operation (*)
arch/x86/kernel/ds.c:514:35:    left side has type unsigned char static [unsigned] [toplevel] sizeof_ptr_field
arch/x86/kernel/ds.c:514:35:    right side has type bad type enum bts_field field
arch/x86/kernel/ds.c:514:7: error: invalid assignment
arch/x86/kernel/ds.c:514:35: error: incompatible types for operation (*)
arch/x86/kernel/ds.c:514:35:    left side has type unsigned char static [unsigned] [toplevel] sizeof_ptr_field
arch/x86/kernel/ds.c:514:35:    right side has type bad type enum bts_field field
arch/x86/kernel/ds.c:514:7: error: invalid assignment
arch/x86/kernel/ds.c:514:35: error: incompatible types for operation (*)
arch/x86/kernel/ds.c:514:35:    left side has type unsigned char static [unsigned] [toplevel] sizeof_ptr_field
arch/x86/kernel/ds.c:514:35:    right side has type bad type enum bts_field field
arch/x86/kernel/ds.c:514:7: error: invalid assignment
arch/x86/kernel/ds.c:514:35: error: incompatible types for operation (*)
arch/x86/kernel/ds.c:514:35:    left side has type unsigned char static [unsigned] [toplevel] sizeof_ptr_field
arch/x86/kernel/ds.c:514:35:    right side has type bad type enum bts_field field
arch/x86/kernel/ds.c:514:7: error: invalid assignment
arch/x86/kernel/ds.c:520:35: error: incompatible types for operation (*)
arch/x86/kernel/ds.c:520:35:    left side has type unsigned char static [unsigned] [toplevel] sizeof_ptr_field
arch/x86/kernel/ds.c:520:35:    right side has type bad type enum bts_field field
arch/x86/kernel/ds.c:520:7: error: invalid assignment
arch/x86/kernel/ds.c:520:35: error: incompatible types for operation (*)

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Markus Metzger <markus.t.metzger@intel.com>
LKML-Reference: <1245494740.8613.12.camel@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/ds.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/ds.c b/arch/x86/kernel/ds.c
index 48bfe138603..ef42a038f1a 100644
--- a/arch/x86/kernel/ds.c
+++ b/arch/x86/kernel/ds.c
@@ -509,15 +509,15 @@ enum bts_field {
 	bts_escape		= ((unsigned long)-1 & ~bts_qual_mask)
 };
 
-static inline unsigned long bts_get(const char *base, enum bts_field field)
+static inline unsigned long bts_get(const char *base, unsigned long field)
 {
 	base += (ds_cfg.sizeof_ptr_field * field);
 	return *(unsigned long *)base;
 }
 
-static inline void bts_set(char *base, enum bts_field field, unsigned long val)
+static inline void bts_set(char *base, unsigned long field, unsigned long val)
 {
-	base += (ds_cfg.sizeof_ptr_field * field);;
+	base += (ds_cfg.sizeof_ptr_field * field);
 	(*(unsigned long *)base) = val;
 }
 
-- 
cgit v1.2.3


From c9944881acf02b6f25fa62a0441a98b7dc0d7ae6 Mon Sep 17 00:00:00 2001
From: Roland Dreier <rolandd@cisco.com>
Date: Wed, 24 Jun 2009 13:42:40 +0800
Subject: crypto: aes-ni - Don't print message with KERN_ERR on old system

When the aes-intel module is loaded on a system that does not have the
AES instructions, it prints

    Intel AES-NI instructions are not detected.

at level KERN_ERR.  Since aes-intel is aliased to "aes" it will be tried
whenever anything uses AES and spam the console.  This doesn't match
existing practice for how to handle "no hardware" when initializing a
module, so downgrade the message to KERN_INFO.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
---
 arch/x86/crypto/aesni-intel_glue.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/crypto/aesni-intel_glue.c b/arch/x86/crypto/aesni-intel_glue.c
index c580c5ec1ca..d3ec8d588d4 100644
--- a/arch/x86/crypto/aesni-intel_glue.c
+++ b/arch/x86/crypto/aesni-intel_glue.c
@@ -636,7 +636,7 @@ static int __init aesni_init(void)
 	int err;
 
 	if (!cpu_has_aes) {
-		printk(KERN_ERR "Intel AES-NI instructions are not detected.\n");
+		printk(KERN_INFO "Intel AES-NI instructions are not detected.\n");
 		return -ENODEV;
 	}
 	if ((err = crypto_register_alg(&aesni_alg)))
-- 
cgit v1.2.3


From e74e396204bfcb67570ba4517b08f5918e69afea Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Mon, 30 Mar 2009 19:07:44 +0900
Subject: percpu: use dynamic percpu allocator as the default percpu allocator

This patch makes most !CONFIG_HAVE_SETUP_PER_CPU_AREA archs use
dynamic percpu allocator.  The first chunk is allocated using
embedding helper and 8k is reserved for modules.  This ensures that
the new allocator behaves almost identically to the original allocator
as long as static percpu variables are concerned, so it shouldn't
introduce much breakage.

s390 and alpha use custom SHIFT_PERCPU_PTR() to work around addressing
range limit the addressing model imposes.  Unfortunately, this breaks
if the address is specified using a variable, so for now, the two
archs aren't converted.

The following architectures are affected by this change.

* sh
* arm
* cris
* mips
* sparc(32)
* blackfin
* avr32
* parisc (broken, under investigation)
* m32r
* powerpc(32)

As this change makes the dynamic allocator the default one,
CONFIG_HAVE_DYNAMIC_PER_CPU_AREA is replaced with its invert -
CONFIG_HAVE_LEGACY_PER_CPU_AREA, which is added to yet-to-be converted
archs.  These archs implement their own setup_per_cpu_areas() and the
conversion is not trivial.

* powerpc(64)
* sparc(64)
* ia64
* alpha
* s390

Boot and batch alloc/free tests on x86_32 with debug code (x86_32
doesn't use default first chunk initialization).  Compile tested on
sparc(32), powerpc(32), arm and alpha.

Kyle McMartin reported that this change breaks parisc.  The problem is
still under investigation and he is okay with pushing this patch
forward and fixing parisc later.

[ Impact: use dynamic allocator for most archs w/o custom percpu setup ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Reviewed-by: Christoph Lameter <cl@linux.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Bryan Wu <cooloney@kernel.org>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Grant Grundler <grundler@parisc-linux.org>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
---
 arch/alpha/Kconfig   | 3 +++
 arch/ia64/Kconfig    | 3 +++
 arch/powerpc/Kconfig | 3 +++
 arch/s390/Kconfig    | 3 +++
 arch/sparc/Kconfig   | 3 +++
 arch/x86/Kconfig     | 3 ---
 6 files changed, 15 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index 9fb8aae5c39..05d86407188 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -70,6 +70,9 @@ config AUTO_IRQ_AFFINITY
 	depends on SMP
 	default y
 
+config HAVE_LEGACY_PER_CPU_AREA
+	def_bool y
+
 source "init/Kconfig"
 source "kernel/Kconfig.freezer"
 
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 170042b420d..328d2f8b8c3 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -89,6 +89,9 @@ config GENERIC_TIME_VSYSCALL
 	bool
 	default y
 
+config HAVE_LEGACY_PER_CPU_AREA
+	def_bool y
+
 config HAVE_SETUP_PER_CPU_AREA
 	def_bool y
 
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index bf6cedfa05d..a774c2acbe6 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -46,6 +46,9 @@ config GENERIC_HARDIRQS_NO__DO_IRQ
 	bool
 	default y
 
+config HAVE_LEGACY_PER_CPU_AREA
+	def_bool PPC64
+
 config HAVE_SETUP_PER_CPU_AREA
 	def_bool PPC64
 
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index a14dba0e4d6..f4a3cc62d28 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -75,6 +75,9 @@ config VIRT_CPU_ACCOUNTING
 config ARCH_SUPPORTS_DEBUG_PAGEALLOC
 	def_bool y
 
+config HAVE_LEGACY_PER_CPU_AREA
+	def_bool y
+
 mainmenu "Linux Kernel Configuration"
 
 config S390
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 3f8b6a92eab..7a8698b913f 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -92,6 +92,9 @@ config AUDIT_ARCH
 	bool
 	default y
 
+config HAVE_LEGACY_PER_CPU_AREA
+	def_bool y if SPARC64
+
 config HAVE_SETUP_PER_CPU_AREA
 	def_bool y if SPARC64
 
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index d1430ef6b4f..a48a90076d8 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -149,9 +149,6 @@ config ARCH_HAS_CACHE_LINE_SIZE
 config HAVE_SETUP_PER_CPU_AREA
 	def_bool y
 
-config HAVE_DYNAMIC_PER_CPU_AREA
-	def_bool y
-
 config HAVE_CPUMASK_OF_CPU_MAP
 	def_bool X86_64_SMP
 
-- 
cgit v1.2.3


From 405d967dc70002991f8fc35c20e0d3cbc7614f63 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Wed, 24 Jun 2009 15:13:38 +0900
Subject: linker script: throw away .discard section

x86 throws away .discard section but no other archs do.  Also,
.discard is not thrown away while linking modules.  Make every arch
and module linking throw it away.  This will be used to define dummy
variables for percpu declarations and definitions.

This patch is based on Ivan Kokshaysky's alpha percpu patch.

[ Impact: always throw away everything in .discard ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Bryan Wu <cooloney@kernel.org>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Ingo Molnar <mingo@elte.hu>
---
 arch/alpha/kernel/vmlinux.lds.S      | 1 +
 arch/arm/kernel/vmlinux.lds.S        | 1 +
 arch/avr32/kernel/vmlinux.lds.S      | 1 +
 arch/blackfin/kernel/vmlinux.lds.S   | 1 +
 arch/cris/kernel/vmlinux.lds.S       | 1 +
 arch/frv/kernel/vmlinux.lds.S        | 2 ++
 arch/h8300/kernel/vmlinux.lds.S      | 1 +
 arch/ia64/kernel/vmlinux.lds.S       | 1 +
 arch/m32r/kernel/vmlinux.lds.S       | 1 +
 arch/m68k/kernel/vmlinux-std.lds     | 1 +
 arch/m68k/kernel/vmlinux-sun3.lds    | 1 +
 arch/m68knommu/kernel/vmlinux.lds.S  | 1 +
 arch/microblaze/kernel/vmlinux.lds.S | 2 ++
 arch/mips/kernel/vmlinux.lds.S       | 1 +
 arch/mn10300/kernel/vmlinux.lds.S    | 1 +
 arch/parisc/kernel/vmlinux.lds.S     | 1 +
 arch/powerpc/kernel/vmlinux.lds.S    | 1 +
 arch/s390/kernel/vmlinux.lds.S       | 1 +
 arch/sh/kernel/vmlinux.lds.S         | 1 +
 arch/sparc/kernel/vmlinux.lds.S      | 1 +
 arch/um/kernel/dyn.lds.S             | 2 ++
 arch/um/kernel/uml.lds.S             | 2 ++
 arch/xtensa/kernel/vmlinux.lds.S     | 1 +
 23 files changed, 27 insertions(+)

(limited to 'arch')

diff --git a/arch/alpha/kernel/vmlinux.lds.S b/arch/alpha/kernel/vmlinux.lds.S
index b9d6568e5f7..75fe1d6877e 100644
--- a/arch/alpha/kernel/vmlinux.lds.S
+++ b/arch/alpha/kernel/vmlinux.lds.S
@@ -139,6 +139,7 @@ SECTIONS
 		EXIT_TEXT
 		EXIT_DATA
 		*(.exitcall.exit)
+		*(.discard)
 	}
 
 	.mdebug 0 : {
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index 6c077979254..e256c57b898 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -82,6 +82,7 @@ SECTIONS
 		EXIT_TEXT
 		EXIT_DATA
 		*(.exitcall.exit)
+		*(.discard)
 		*(.ARM.exidx.exit.text)
 		*(.ARM.extab.exit.text)
 #ifndef CONFIG_MMU
diff --git a/arch/avr32/kernel/vmlinux.lds.S b/arch/avr32/kernel/vmlinux.lds.S
index 7910d41eb88..b8324608ec0 100644
--- a/arch/avr32/kernel/vmlinux.lds.S
+++ b/arch/avr32/kernel/vmlinux.lds.S
@@ -131,6 +131,7 @@ SECTIONS
 	/DISCARD/       	: {
 		EXIT_DATA
 		*(.exitcall.exit)
+		*(.discard)
 	}
 
 	DWARF_DEBUG
diff --git a/arch/blackfin/kernel/vmlinux.lds.S b/arch/blackfin/kernel/vmlinux.lds.S
index 6ac307ca0d8..6e8eabd8f0a 100644
--- a/arch/blackfin/kernel/vmlinux.lds.S
+++ b/arch/blackfin/kernel/vmlinux.lds.S
@@ -280,5 +280,6 @@ SECTIONS
 	/DISCARD/ :
 	{
 		*(.exitcall.exit)
+		*(.discard)
 	}
 }
diff --git a/arch/cris/kernel/vmlinux.lds.S b/arch/cris/kernel/vmlinux.lds.S
index 0d2adfc794d..a3175ebb38c 100644
--- a/arch/cris/kernel/vmlinux.lds.S
+++ b/arch/cris/kernel/vmlinux.lds.S
@@ -145,6 +145,7 @@ SECTIONS
 		EXIT_TEXT
 		EXIT_DATA
 		*(.exitcall.exit)
+		*(.discard)
         }
 
 	dram_end = dram_start + (CONFIG_ETRAX_DRAM_SIZE - __CONFIG_ETRAX_VMEM_SIZE)*1024*1024;
diff --git a/arch/frv/kernel/vmlinux.lds.S b/arch/frv/kernel/vmlinux.lds.S
index 22d9787406e..64b5a5e4d35 100644
--- a/arch/frv/kernel/vmlinux.lds.S
+++ b/arch/frv/kernel/vmlinux.lds.S
@@ -177,6 +177,8 @@ SECTIONS
   .debug_ranges		0 : { *(.debug_ranges) }
 
   .comment 0 : { *(.comment) }
+
+  /DISCARD/ : { *(.discard) }
 }
 
 __kernel_image_size_no_bss = __bss_start - __kernel_image_start;
diff --git a/arch/h8300/kernel/vmlinux.lds.S b/arch/h8300/kernel/vmlinux.lds.S
index 43a87b9085b..03d6c0df33d 100644
--- a/arch/h8300/kernel/vmlinux.lds.S
+++ b/arch/h8300/kernel/vmlinux.lds.S
@@ -154,6 +154,7 @@ SECTIONS
 	}
 	/DISCARD/ : {
 		*(.exitcall.exit)
+		*(.discard)
 	}
         .romfs :	
 	{
diff --git a/arch/ia64/kernel/vmlinux.lds.S b/arch/ia64/kernel/vmlinux.lds.S
index 4a95e86b9ac..13d95897587 100644
--- a/arch/ia64/kernel/vmlinux.lds.S
+++ b/arch/ia64/kernel/vmlinux.lds.S
@@ -29,6 +29,7 @@ SECTIONS
 	EXIT_TEXT
 	EXIT_DATA
 	*(.exitcall.exit)
+	*(.discard)
 	*(.IA_64.unwind.exit.text)
 	*(.IA_64.unwind_info.exit.text)
 	}
diff --git a/arch/m32r/kernel/vmlinux.lds.S b/arch/m32r/kernel/vmlinux.lds.S
index 4179adf6c62..480a49944cf 100644
--- a/arch/m32r/kernel/vmlinux.lds.S
+++ b/arch/m32r/kernel/vmlinux.lds.S
@@ -125,6 +125,7 @@ SECTIONS
 	EXIT_TEXT
 	EXIT_DATA
 	*(.exitcall.exit)
+	*(.discard)
 	}
 
   /* Stabs debugging sections.  */
diff --git a/arch/m68k/kernel/vmlinux-std.lds b/arch/m68k/kernel/vmlinux-std.lds
index 01d212bb05a..905a797ada9 100644
--- a/arch/m68k/kernel/vmlinux-std.lds
+++ b/arch/m68k/kernel/vmlinux-std.lds
@@ -87,6 +87,7 @@ SECTIONS
 	EXIT_TEXT
 	EXIT_DATA
 	*(.exitcall.exit)
+	*(.discard)
 	}
 
   /* Stabs debugging sections.  */
diff --git a/arch/m68k/kernel/vmlinux-sun3.lds b/arch/m68k/kernel/vmlinux-sun3.lds
index c192f773db9..47d04be322a 100644
--- a/arch/m68k/kernel/vmlinux-sun3.lds
+++ b/arch/m68k/kernel/vmlinux-sun3.lds
@@ -82,6 +82,7 @@ __init_begin = .;
 	EXIT_TEXT
 	EXIT_DATA
 	*(.exitcall.exit)
+	*(.discard)
 	}
 
   .crap : {
diff --git a/arch/m68knommu/kernel/vmlinux.lds.S b/arch/m68knommu/kernel/vmlinux.lds.S
index b7fe505e358..68111a61a77 100644
--- a/arch/m68knommu/kernel/vmlinux.lds.S
+++ b/arch/m68knommu/kernel/vmlinux.lds.S
@@ -188,6 +188,7 @@ SECTIONS {
 		EXIT_TEXT
 		EXIT_DATA
 		*(.exitcall.exit)
+		*(.discard)
 	}
 
 	.bss : {
diff --git a/arch/microblaze/kernel/vmlinux.lds.S b/arch/microblaze/kernel/vmlinux.lds.S
index d34d38dcd12..a207543c592 100644
--- a/arch/microblaze/kernel/vmlinux.lds.S
+++ b/arch/microblaze/kernel/vmlinux.lds.S
@@ -162,4 +162,6 @@ SECTIONS {
 	}
 	. = ALIGN(4096);
 	_end = .;
+
+	/DISCARD/ : { *(.discard) }
 }
diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S
index 58738c8d754..45901609b74 100644
--- a/arch/mips/kernel/vmlinux.lds.S
+++ b/arch/mips/kernel/vmlinux.lds.S
@@ -179,6 +179,7 @@ SECTIONS
 	/* Sections to be discarded */
 	/DISCARD/ : {
 		*(.exitcall.exit)
+		*(.discard)
 
 		/* ABI crap starts here */
 		*(.MIPS.options)
diff --git a/arch/mn10300/kernel/vmlinux.lds.S b/arch/mn10300/kernel/vmlinux.lds.S
index 24de6b90f40..5d9f2f96ad9 100644
--- a/arch/mn10300/kernel/vmlinux.lds.S
+++ b/arch/mn10300/kernel/vmlinux.lds.S
@@ -146,6 +146,7 @@ SECTIONS
   /* Sections to be discarded */
   /DISCARD/ : {
 	*(.exitcall.exit)
+	*(.discard)
 	}
 
   STABS_DEBUG
diff --git a/arch/parisc/kernel/vmlinux.lds.S b/arch/parisc/kernel/vmlinux.lds.S
index fd2cc4fd2b6..ccf58341845 100644
--- a/arch/parisc/kernel/vmlinux.lds.S
+++ b/arch/parisc/kernel/vmlinux.lds.S
@@ -240,6 +240,7 @@ SECTIONS
 	/* Sections to be discarded */
 	/DISCARD/ : {
 		*(.exitcall.exit)
+		*(.discard)
 #ifdef CONFIG_64BIT
 		/* temporary hack until binutils is fixed to not emit these
 	 	 * for static binaries
diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S
index 8ef8a14abc9..7fca9355fd3 100644
--- a/arch/powerpc/kernel/vmlinux.lds.S
+++ b/arch/powerpc/kernel/vmlinux.lds.S
@@ -40,6 +40,7 @@ SECTIONS
 	/* Sections to be discarded. */
 	/DISCARD/ : {
 	*(.exitcall.exit)
+	*(.discard)
 	EXIT_DATA
 	}
 
diff --git a/arch/s390/kernel/vmlinux.lds.S b/arch/s390/kernel/vmlinux.lds.S
index a53db23ee09..98867dfea46 100644
--- a/arch/s390/kernel/vmlinux.lds.S
+++ b/arch/s390/kernel/vmlinux.lds.S
@@ -161,6 +161,7 @@ SECTIONS
 	/DISCARD/ : {
 		EXIT_DATA
 		*(.exitcall.exit)
+		*(.discard)
 	}
 
 	/* Debugging sections.	*/
diff --git a/arch/sh/kernel/vmlinux.lds.S b/arch/sh/kernel/vmlinux.lds.S
index f53c76acaed..766976d27b2 100644
--- a/arch/sh/kernel/vmlinux.lds.S
+++ b/arch/sh/kernel/vmlinux.lds.S
@@ -171,6 +171,7 @@ SECTIONS
 	 */
 	/DISCARD/ : {
 		*(.exitcall.exit)
+		*(.discard)
 	}
 
 	STABS_DEBUG
diff --git a/arch/sparc/kernel/vmlinux.lds.S b/arch/sparc/kernel/vmlinux.lds.S
index fcbbd000ec0..d63cf914667 100644
--- a/arch/sparc/kernel/vmlinux.lds.S
+++ b/arch/sparc/kernel/vmlinux.lds.S
@@ -175,6 +175,7 @@ SECTIONS
 		EXIT_TEXT
 		EXIT_DATA
 		*(.exitcall.exit)
+		*(.discard)
 	}
 
 	STABS_DEBUG
diff --git a/arch/um/kernel/dyn.lds.S b/arch/um/kernel/dyn.lds.S
index 9975e1ab44f..2916d6eadff 100644
--- a/arch/um/kernel/dyn.lds.S
+++ b/arch/um/kernel/dyn.lds.S
@@ -156,4 +156,6 @@ SECTIONS
   STABS_DEBUG
 
   DWARF_DEBUG
+
+  /DISCARD/	: { *(.discard) }
 }
diff --git a/arch/um/kernel/uml.lds.S b/arch/um/kernel/uml.lds.S
index 11b835248b8..1f8a622cabe 100644
--- a/arch/um/kernel/uml.lds.S
+++ b/arch/um/kernel/uml.lds.S
@@ -100,4 +100,6 @@ SECTIONS
   STABS_DEBUG
 
   DWARF_DEBUG
+
+  /DISCARD/	: { *(.discard) }
 }
diff --git a/arch/xtensa/kernel/vmlinux.lds.S b/arch/xtensa/kernel/vmlinux.lds.S
index 41c159cd872..b1e24638acd 100644
--- a/arch/xtensa/kernel/vmlinux.lds.S
+++ b/arch/xtensa/kernel/vmlinux.lds.S
@@ -287,6 +287,7 @@ SECTIONS
 	EXIT_TEXT
 	EXIT_DATA
         *(.exitcall.exit)
+	*(.discard)
   }
 
   .xt.lit : { *(.xt.lit) }
-- 
cgit v1.2.3


From fe87f94f341a4b4097285b46f003059b26eb59bf Mon Sep 17 00:00:00 2001
From: Jesper Nilsson <jesper.nilsson@axis.com>
Date: Wed, 24 Jun 2009 15:13:41 +0900
Subject: CRIS: Change DEFINE_PER_CPU of current_pgd to be non volatile.

The DEFINE_PER_CPU of current_pgd was on CRIS defined using volatile,
which is not needed. Remove volatile.

Tested on an ARTPEC-3 (CRISv32) board.

tj: extern DEFINE_PER_CPU() replaced with DECLARE_PER_CPU()

[ Impact: code cleanup ]

Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/cris/include/asm/mmu_context.h | 3 ++-
 arch/cris/mm/fault.c                | 2 +-
 2 files changed, 3 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/cris/include/asm/mmu_context.h b/arch/cris/include/asm/mmu_context.h
index 72ba08dcfd1..1d45fd6365b 100644
--- a/arch/cris/include/asm/mmu_context.h
+++ b/arch/cris/include/asm/mmu_context.h
@@ -17,7 +17,8 @@ extern void switch_mm(struct mm_struct *prev, struct mm_struct *next,
  * registers like cr3 on the i386
  */
 
-extern volatile DEFINE_PER_CPU(pgd_t *,current_pgd); /* defined in arch/cris/mm/fault.c */
+/* defined in arch/cris/mm/fault.c */
+DECLARE_PER_CPU(pgd_t *, current_pgd);
 
 static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
 {
diff --git a/arch/cris/mm/fault.c b/arch/cris/mm/fault.c
index f925115e325..4a7cdd9ea1e 100644
--- a/arch/cris/mm/fault.c
+++ b/arch/cris/mm/fault.c
@@ -29,7 +29,7 @@ extern void die_if_kernel(const char *, struct pt_regs *, long);
 
 /* current active page directory */
 
-volatile DEFINE_PER_CPU(pgd_t *,current_pgd);
+DEFINE_PER_CPU(pgd_t *, current_pgd);
 unsigned long cris_signal_return_page;
 
 /*
-- 
cgit v1.2.3


From 204fba4aa303ea4a7bb726a539bf4a5b9e3203d0 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Wed, 24 Jun 2009 15:13:45 +0900
Subject: percpu: cleanup percpu array definitions

Currently, the following three different ways to define percpu arrays
are in use.

1. DEFINE_PER_CPU(elem_type[array_len], array_name);
2. DEFINE_PER_CPU(elem_type, array_name[array_len]);
3. DEFINE_PER_CPU(elem_type, array_name)[array_len];

Unify to #1 which correctly separates the roles of the two parameters
and thus allows more flexibility in the way percpu variables are
defined.

[ Impact: cleanup ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: linux-mm@kvack.org
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: David S. Miller <davem@davemloft.net>
---
 arch/ia64/kernel/smp.c               | 2 +-
 arch/ia64/sn/kernel/setup.c          | 2 +-
 arch/powerpc/mm/stab.c               | 2 +-
 arch/powerpc/platforms/ps3/smp.c     | 2 +-
 arch/x86/kernel/cpu/cpu_debug.c      | 4 ++--
 arch/x86/kernel/cpu/mcheck/mce_amd.c | 2 +-
 arch/x86/kernel/cpu/perf_counter.c   | 2 +-
 7 files changed, 8 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/ia64/kernel/smp.c b/arch/ia64/kernel/smp.c
index f0c521b0ba4..94cf78ba28f 100644
--- a/arch/ia64/kernel/smp.c
+++ b/arch/ia64/kernel/smp.c
@@ -58,7 +58,7 @@ static struct local_tlb_flush_counts {
 	unsigned int count;
 } __attribute__((__aligned__(32))) local_tlb_flush_counts[NR_CPUS];
 
-static DEFINE_PER_CPU(unsigned short, shadow_flush_counts[NR_CPUS]) ____cacheline_aligned;
+static DEFINE_PER_CPU(unsigned short [NR_CPUS], shadow_flush_counts) ____cacheline_aligned;
 
 #define IPI_CALL_FUNC		0
 #define IPI_CPU_STOP		1
diff --git a/arch/ia64/sn/kernel/setup.c b/arch/ia64/sn/kernel/setup.c
index e456f062f24..ece1bf99449 100644
--- a/arch/ia64/sn/kernel/setup.c
+++ b/arch/ia64/sn/kernel/setup.c
@@ -71,7 +71,7 @@ EXPORT_SYMBOL(sn_rtc_cycles_per_second);
 DEFINE_PER_CPU(struct sn_hub_info_s, __sn_hub_info);
 EXPORT_PER_CPU_SYMBOL(__sn_hub_info);
 
-DEFINE_PER_CPU(short, __sn_cnodeid_to_nasid[MAX_COMPACT_NODES]);
+DEFINE_PER_CPU(short [MAX_COMPACT_NODES], __sn_cnodeid_to_nasid);
 EXPORT_PER_CPU_SYMBOL(__sn_cnodeid_to_nasid);
 
 DEFINE_PER_CPU(struct nodepda_s *, __sn_nodepda);
diff --git a/arch/powerpc/mm/stab.c b/arch/powerpc/mm/stab.c
index 98cd1dc2ae7..6e9b69c9985 100644
--- a/arch/powerpc/mm/stab.c
+++ b/arch/powerpc/mm/stab.c
@@ -31,7 +31,7 @@ struct stab_entry {
 
 #define NR_STAB_CACHE_ENTRIES 8
 static DEFINE_PER_CPU(long, stab_cache_ptr);
-static DEFINE_PER_CPU(long, stab_cache[NR_STAB_CACHE_ENTRIES]);
+static DEFINE_PER_CPU(long [NR_STAB_CACHE_ENTRIES], stab_cache);
 
 /*
  * Create a segment table entry for the given esid/vsid pair.
diff --git a/arch/powerpc/platforms/ps3/smp.c b/arch/powerpc/platforms/ps3/smp.c
index f6e04bcc70e..51ffde40af2 100644
--- a/arch/powerpc/platforms/ps3/smp.c
+++ b/arch/powerpc/platforms/ps3/smp.c
@@ -37,7 +37,7 @@
   */
 
 #define MSG_COUNT 4
-static DEFINE_PER_CPU(unsigned int, ps3_ipi_virqs[MSG_COUNT]);
+static DEFINE_PER_CPU(unsigned int [MSG_COUNT], ps3_ipi_virqs);
 
 static void do_message_pass(int target, int msg)
 {
diff --git a/arch/x86/kernel/cpu/cpu_debug.c b/arch/x86/kernel/cpu/cpu_debug.c
index 6b2a52dd040..dca325c0399 100644
--- a/arch/x86/kernel/cpu/cpu_debug.c
+++ b/arch/x86/kernel/cpu/cpu_debug.c
@@ -30,8 +30,8 @@
 #include <asm/apic.h>
 #include <asm/desc.h>
 
-static DEFINE_PER_CPU(struct cpu_cpuX_base, cpu_arr[CPU_REG_ALL_BIT]);
-static DEFINE_PER_CPU(struct cpu_private *, priv_arr[MAX_CPU_FILES]);
+static DEFINE_PER_CPU(struct cpu_cpuX_base [CPU_REG_ALL_BIT], cpu_arr);
+static DEFINE_PER_CPU(struct cpu_private * [MAX_CPU_FILES], priv_arr);
 static DEFINE_PER_CPU(int, cpu_priv_count);
 
 static DEFINE_MUTEX(cpu_debug_lock);
diff --git a/arch/x86/kernel/cpu/mcheck/mce_amd.c b/arch/x86/kernel/cpu/mcheck/mce_amd.c
index ddae21620bd..bd2a2fa8462 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_amd.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_amd.c
@@ -69,7 +69,7 @@ struct threshold_bank {
 	struct threshold_block	*blocks;
 	cpumask_var_t		cpus;
 };
-static DEFINE_PER_CPU(struct threshold_bank *, threshold_banks[NR_BANKS]);
+static DEFINE_PER_CPU(struct threshold_bank * [NR_BANKS], threshold_banks);
 
 #ifdef CONFIG_SMP
 static unsigned char shared_bank[NR_BANKS] = {
diff --git a/arch/x86/kernel/cpu/perf_counter.c b/arch/x86/kernel/cpu/perf_counter.c
index 76dfef23f78..4946288d683 100644
--- a/arch/x86/kernel/cpu/perf_counter.c
+++ b/arch/x86/kernel/cpu/perf_counter.c
@@ -862,7 +862,7 @@ amd_pmu_disable_counter(struct hw_perf_counter *hwc, int idx)
 	x86_pmu_disable_counter(hwc, idx);
 }
 
-static DEFINE_PER_CPU(u64, prev_left[X86_PMC_IDX_MAX]);
+static DEFINE_PER_CPU(u64 [X86_PMC_IDX_MAX], prev_left);
 
 /*
  * Set the next IRQ period, based on the hwc->period_left value.
-- 
cgit v1.2.3


From b9bf3121af348d9255f1c917830fe8c2df52efcb Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Wed, 24 Jun 2009 15:13:47 +0900
Subject: percpu: use DEFINE_PER_CPU_SHARED_ALIGNED()

There are a few places where ___cacheline_aligned* is used with
DEFINE_PER_CPU().  Use DEFINE_PER_CPU_SHARED_ALIGNED() instead.

DEFINE_PER_CPU_SHARED_ALIGNED() applies alignment only on SMPs.  While
all other converted places used _in_smp variant or only get compiled
for SMP, net/rds used unconditional ____cacheline_aligned.  I don't
see any reason these data structures should be aligned on UP and thus
converted together.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Andy Grover <andy.grover@oracle.com>
---
 arch/blackfin/mm/sram-alloc.c | 6 +++---
 arch/ia64/kernel/smp.c        | 3 ++-
 2 files changed, 5 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/blackfin/mm/sram-alloc.c b/arch/blackfin/mm/sram-alloc.c
index 0bc3c4ef0aa..99e4dbb1dfd 100644
--- a/arch/blackfin/mm/sram-alloc.c
+++ b/arch/blackfin/mm/sram-alloc.c
@@ -42,9 +42,9 @@
 #include <asm/mem_map.h>
 #include "blackfin_sram.h"
 
-static DEFINE_PER_CPU(spinlock_t, l1sram_lock) ____cacheline_aligned_in_smp;
-static DEFINE_PER_CPU(spinlock_t, l1_data_sram_lock) ____cacheline_aligned_in_smp;
-static DEFINE_PER_CPU(spinlock_t, l1_inst_sram_lock) ____cacheline_aligned_in_smp;
+static DEFINE_PER_CPU_SHARED_ALIGNED(spinlock_t, l1sram_lock);
+static DEFINE_PER_CPU_SHARED_ALIGNED(spinlock_t, l1_data_sram_lock);
+static DEFINE_PER_CPU_SHARED_ALIGNED(spinlock_t, l1_inst_sram_lock);
 static spinlock_t l2_sram_lock ____cacheline_aligned_in_smp;
 
 /* the data structure for L1 scratchpad and DATA SRAM */
diff --git a/arch/ia64/kernel/smp.c b/arch/ia64/kernel/smp.c
index 94cf78ba28f..93ebfea43c6 100644
--- a/arch/ia64/kernel/smp.c
+++ b/arch/ia64/kernel/smp.c
@@ -58,7 +58,8 @@ static struct local_tlb_flush_counts {
 	unsigned int count;
 } __attribute__((__aligned__(32))) local_tlb_flush_counts[NR_CPUS];
 
-static DEFINE_PER_CPU(unsigned short [NR_CPUS], shadow_flush_counts) ____cacheline_aligned;
+static DEFINE_PER_CPU_SHARED_ALIGNED(unsigned short [NR_CPUS],
+				     shadow_flush_counts);
 
 #define IPI_CALL_FUNC		0
 #define IPI_CPU_STOP		1
-- 
cgit v1.2.3


From 245b2e70eabd797932adb263a65da0bab3711753 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Wed, 24 Jun 2009 15:13:48 +0900
Subject: percpu: clean up percpu variable definitions

Percpu variable definition is about to be updated such that all percpu
symbols including the static ones must be unique.  Update percpu
variable definitions accordingly.

* as,cfq: rename ioc_count uniquely

* cpufreq: rename cpu_dbs_info uniquely

* xen: move nesting_count out of xen_evtchn_do_upcall() and rename it

* mm: move ratelimits out of balance_dirty_pages_ratelimited_nr() and
  rename it

* ipv4,6: rename cookie_scratch uniquely

* x86 perf_counter: rename prev_left to pmc_prev_left, irq_entry to
  pmc_irq_entry and nmi_entry to pmc_nmi_entry

* perf_counter: rename disable_count to perf_disable_count

* ftrace: rename test_event_disable to ftrace_test_event_disable

* kmemleak: rename test_pointer to kmemleak_test_pointer

* mce: rename next_interval to mce_next_interval

[ Impact: percpu usage cleanups, no duplicate static percpu var names ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Dave Jones <davej@redhat.com>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: linux-mm <linux-mm@kvack.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <srostedt@redhat.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Andi Kleen <andi@firstfloor.org>
---
 arch/x86/kernel/cpu/mcheck/mce.c   |  8 ++++----
 arch/x86/kernel/cpu/perf_counter.c | 14 +++++++-------
 2 files changed, 11 insertions(+), 11 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index 284d1de968b..cba8cd3e957 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -1091,7 +1091,7 @@ void mce_log_therm_throt_event(__u64 status)
  */
 static int check_interval = 5 * 60; /* 5 minutes */
 
-static DEFINE_PER_CPU(int, next_interval); /* in jiffies */
+static DEFINE_PER_CPU(int, mce_next_interval); /* in jiffies */
 static DEFINE_PER_CPU(struct timer_list, mce_timer);
 
 static void mcheck_timer(unsigned long data)
@@ -1110,7 +1110,7 @@ static void mcheck_timer(unsigned long data)
 	 * Alert userspace if needed.  If we logged an MCE, reduce the
 	 * polling interval, otherwise increase the polling interval.
 	 */
-	n = &__get_cpu_var(next_interval);
+	n = &__get_cpu_var(mce_next_interval);
 	if (mce_notify_irq())
 		*n = max(*n/2, HZ/100);
 	else
@@ -1311,7 +1311,7 @@ static void mce_cpu_features(struct cpuinfo_x86 *c)
 static void mce_init_timer(void)
 {
 	struct timer_list *t = &__get_cpu_var(mce_timer);
-	int *n = &__get_cpu_var(next_interval);
+	int *n = &__get_cpu_var(mce_next_interval);
 
 	if (mce_ignore_ce)
 		return;
@@ -1914,7 +1914,7 @@ mce_cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu)
 	case CPU_DOWN_FAILED:
 	case CPU_DOWN_FAILED_FROZEN:
 		t->expires = round_jiffies(jiffies +
-						__get_cpu_var(next_interval));
+					   __get_cpu_var(mce_next_interval));
 		add_timer_on(t, cpu);
 		smp_call_function_single(cpu, mce_reenable_cpu, &action, 1);
 		break;
diff --git a/arch/x86/kernel/cpu/perf_counter.c b/arch/x86/kernel/cpu/perf_counter.c
index 4946288d683..5fdf63aaaba 100644
--- a/arch/x86/kernel/cpu/perf_counter.c
+++ b/arch/x86/kernel/cpu/perf_counter.c
@@ -862,7 +862,7 @@ amd_pmu_disable_counter(struct hw_perf_counter *hwc, int idx)
 	x86_pmu_disable_counter(hwc, idx);
 }
 
-static DEFINE_PER_CPU(u64 [X86_PMC_IDX_MAX], prev_left);
+static DEFINE_PER_CPU(u64 [X86_PMC_IDX_MAX], pmc_prev_left);
 
 /*
  * Set the next IRQ period, based on the hwc->period_left value.
@@ -901,7 +901,7 @@ x86_perf_counter_set_period(struct perf_counter *counter,
 	if (left > x86_pmu.max_period)
 		left = x86_pmu.max_period;
 
-	per_cpu(prev_left[idx], smp_processor_id()) = left;
+	per_cpu(pmc_prev_left[idx], smp_processor_id()) = left;
 
 	/*
 	 * The hw counter starts counting from this counter offset,
@@ -1089,7 +1089,7 @@ void perf_counter_print_debug(void)
 		rdmsrl(x86_pmu.eventsel + idx, pmc_ctrl);
 		rdmsrl(x86_pmu.perfctr  + idx, pmc_count);
 
-		prev_left = per_cpu(prev_left[idx], cpu);
+		prev_left = per_cpu(pmc_prev_left[idx], cpu);
 
 		pr_info("CPU#%d:   gen-PMC%d ctrl:  %016llx\n",
 			cpu, idx, pmc_ctrl);
@@ -1561,8 +1561,8 @@ void callchain_store(struct perf_callchain_entry *entry, u64 ip)
 		entry->ip[entry->nr++] = ip;
 }
 
-static DEFINE_PER_CPU(struct perf_callchain_entry, irq_entry);
-static DEFINE_PER_CPU(struct perf_callchain_entry, nmi_entry);
+static DEFINE_PER_CPU(struct perf_callchain_entry, pmc_irq_entry);
+static DEFINE_PER_CPU(struct perf_callchain_entry, pmc_nmi_entry);
 
 
 static void
@@ -1709,9 +1709,9 @@ struct perf_callchain_entry *perf_callchain(struct pt_regs *regs)
 	struct perf_callchain_entry *entry;
 
 	if (in_nmi())
-		entry = &__get_cpu_var(nmi_entry);
+		entry = &__get_cpu_var(pmc_nmi_entry);
 	else
-		entry = &__get_cpu_var(irq_entry);
+		entry = &__get_cpu_var(pmc_irq_entry);
 
 	entry->nr = 0;
 
-- 
cgit v1.2.3


From 6088464cf1ae9fb3d2ccc0ec5feb3f5b971098d8 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Wed, 24 Jun 2009 15:13:52 +0900
Subject: alpha: kill unnecessary __used attribute in PER_CPU_ATTRIBUTES

With the previous percpu variable definition change, all percpu
variables are global and there's no need to specify __used, which only
triggers on recent compilers anyway.  Kill it.

[ Impact: remove unnecessary percpu attribute ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Richard Henderson <rth@twiddle.net>
---
 arch/alpha/include/asm/percpu.h | 5 -----
 1 file changed, 5 deletions(-)

(limited to 'arch')

diff --git a/arch/alpha/include/asm/percpu.h b/arch/alpha/include/asm/percpu.h
index 06c5c7a4afd..7f0a9c4f2fd 100644
--- a/arch/alpha/include/asm/percpu.h
+++ b/arch/alpha/include/asm/percpu.h
@@ -30,7 +30,6 @@ extern unsigned long __per_cpu_offset[NR_CPUS];
 
 #ifndef MODULE
 #define SHIFT_PERCPU_PTR(var, offset) RELOC_HIDE(&per_cpu_var(var), (offset))
-#define PER_CPU_ATTRIBUTES
 #else
 /*
  * To calculate addresses of locally defined variables, GCC uses 32-bit
@@ -49,8 +48,6 @@ extern unsigned long __per_cpu_offset[NR_CPUS];
 		: "=&r"(__ptr), "=&r"(tmp_gp));		\
 	(typeof(&per_cpu_var(var)))(__ptr + (offset)); })
 
-#define PER_CPU_ATTRIBUTES	__used
-
 #endif /* MODULE */
 
 /*
@@ -71,8 +68,6 @@ extern unsigned long __per_cpu_offset[NR_CPUS];
 #define __get_cpu_var(var)		per_cpu_var(var)
 #define __raw_get_cpu_var(var)		per_cpu_var(var)
 
-#define PER_CPU_ATTRIBUTES
-
 #endif /* SMP */
 
 #ifdef CONFIG_SMP
-- 
cgit v1.2.3


From 9b7dbc7dc0365a943af2d73b1376a6f0aac5dc0d Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Wed, 24 Jun 2009 15:13:52 +0900
Subject: alpha: switch to dynamic percpu allocator

Alpha implements custom SHIFT_PERCPU_PTR for modules because percpu
area can be located far away from the 4G area where the module text is
located.  The custom SHIFT_PERCPU_PTR forces GOT usage using ldq
instruction with literal relocation; however, the relocation can't be
used with dynamically allocated percpu variables.  Fortunately,
similar result can be achieved by using weak percpu variable
definitions.

This patch makes alpha use weak definitions and switch to dynamic
percpu allocator.

asm/tlbflush.h was getting linux/sched.h via asm/percpu.h which no
longer needs it.  Include linux/sched.h directly in asm/tlbflush.h.

Compile tested.  Generation of litereal relocation verified.

This patch is based on Ivan Kokshaysky's alpha percpu patch.

[ Impact: use dynamic percpu allocator ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Richard Henderson <rth@twiddle.net>
---
 arch/alpha/Kconfig                |  3 --
 arch/alpha/include/asm/percpu.h   | 95 ++++-----------------------------------
 arch/alpha/include/asm/tlbflush.h |  1 +
 3 files changed, 9 insertions(+), 90 deletions(-)

(limited to 'arch')

diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index 05d86407188..9fb8aae5c39 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -70,9 +70,6 @@ config AUTO_IRQ_AFFINITY
 	depends on SMP
 	default y
 
-config HAVE_LEGACY_PER_CPU_AREA
-	def_bool y
-
 source "init/Kconfig"
 source "kernel/Kconfig.freezer"
 
diff --git a/arch/alpha/include/asm/percpu.h b/arch/alpha/include/asm/percpu.h
index 7f0a9c4f2fd..2c12378e3aa 100644
--- a/arch/alpha/include/asm/percpu.h
+++ b/arch/alpha/include/asm/percpu.h
@@ -1,97 +1,18 @@
 #ifndef __ALPHA_PERCPU_H
 #define __ALPHA_PERCPU_H
 
-#include <linux/compiler.h>
-#include <linux/threads.h>
-#include <linux/percpu-defs.h>
-
 /*
- * Determine the real variable name from the name visible in the
- * kernel sources.
- */
-#define per_cpu_var(var) per_cpu__##var
-
-#ifdef CONFIG_SMP
-
-/*
- * per_cpu_offset() is the offset that has to be added to a
- * percpu variable to get to the instance for a certain processor.
- */
-extern unsigned long __per_cpu_offset[NR_CPUS];
-
-#define per_cpu_offset(x) (__per_cpu_offset[x])
-
-#define __my_cpu_offset per_cpu_offset(raw_smp_processor_id())
-#ifdef CONFIG_DEBUG_PREEMPT
-#define my_cpu_offset per_cpu_offset(smp_processor_id())
-#else
-#define my_cpu_offset __my_cpu_offset
-#endif
-
-#ifndef MODULE
-#define SHIFT_PERCPU_PTR(var, offset) RELOC_HIDE(&per_cpu_var(var), (offset))
-#else
-/*
- * To calculate addresses of locally defined variables, GCC uses 32-bit
- * displacement from the GP. Which doesn't work for per cpu variables in
- * modules, as an offset to the kernel per cpu area is way above 4G.
+ * To calculate addresses of locally defined variables, GCC uses
+ * 32-bit displacement from the GP. Which doesn't work for per cpu
+ * variables in modules, as an offset to the kernel per cpu area is
+ * way above 4G.
  *
- * This forces allocation of a GOT entry for per cpu variable using
- * ldq instruction with a 'literal' relocation.
- */
-#define SHIFT_PERCPU_PTR(var, offset) ({		\
-	extern int simple_identifier_##var(void);	\
-	unsigned long __ptr, tmp_gp;			\
-	asm (  "br	%1, 1f		  	      \n\
-	1:	ldgp	%1, 0(%1)	    	      \n\
-		ldq %0, per_cpu__" #var"(%1)\t!literal"		\
-		: "=&r"(__ptr), "=&r"(tmp_gp));		\
-	(typeof(&per_cpu_var(var)))(__ptr + (offset)); })
-
-#endif /* MODULE */
-
-/*
- * A percpu variable may point to a discarded regions. The following are
- * established ways to produce a usable pointer from the percpu variable
- * offset.
+ * Always use weak definitions for percpu variables in modules.
  */
-#define per_cpu(var, cpu) \
-	(*SHIFT_PERCPU_PTR(var, per_cpu_offset(cpu)))
-#define __get_cpu_var(var) \
-	(*SHIFT_PERCPU_PTR(var, my_cpu_offset))
-#define __raw_get_cpu_var(var) \
-	(*SHIFT_PERCPU_PTR(var, __my_cpu_offset))
-
-#else /* ! SMP */
-
-#define per_cpu(var, cpu)		(*((void)(cpu), &per_cpu_var(var)))
-#define __get_cpu_var(var)		per_cpu_var(var)
-#define __raw_get_cpu_var(var)		per_cpu_var(var)
-
-#endif /* SMP */
-
-#ifdef CONFIG_SMP
-#define PER_CPU_BASE_SECTION ".data.percpu"
-#else
-#define PER_CPU_BASE_SECTION ".data"
-#endif
-
-#ifdef CONFIG_SMP
-
-#ifdef MODULE
-#define PER_CPU_SHARED_ALIGNED_SECTION ""
-#else
-#define PER_CPU_SHARED_ALIGNED_SECTION ".shared_aligned"
-#endif
-#define PER_CPU_FIRST_SECTION ".first"
-
-#else
-
-#define PER_CPU_SHARED_ALIGNED_SECTION ""
-#define PER_CPU_FIRST_SECTION ""
-
+#if defined(MODULE) && defined(CONFIG_SMP)
+#define ARCH_NEEDS_WEAK_PER_CPU
 #endif
 
-#define PER_CPU_ATTRIBUTES
+#include <asm-generic/percpu.h>
 
 #endif /* __ALPHA_PERCPU_H */
diff --git a/arch/alpha/include/asm/tlbflush.h b/arch/alpha/include/asm/tlbflush.h
index 9d87aaa08c0..e89e0c2e15b 100644
--- a/arch/alpha/include/asm/tlbflush.h
+++ b/arch/alpha/include/asm/tlbflush.h
@@ -2,6 +2,7 @@
 #define _ALPHA_TLBFLUSH_H
 
 #include <linux/mm.h>
+#include <linux/sched.h>
 #include <asm/compiler.h>
 #include <asm/pgalloc.h>
 
-- 
cgit v1.2.3


From 9a0ef2923abd2cc2c6f78d3663ac7af34c0220e8 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Wed, 24 Jun 2009 15:13:53 +0900
Subject: s390: switch to dynamic percpu allocator

64bit s390 shares the same problem with alpha regarding percpu symbol
addressing from modules.  It needs assembly magic to force GOTENT
reference when building module as the percpu address will be outside
the usual 4G range from the module text.  This can be solved by using
weak percpu variable definitions.

This patch makes s390 use weak definitions and switch to dynamic
percpu allocator.  Please note that weak attribute is not added if
!SMP as percpu variables behave exactly the same as normal variables
on UP.

Compile tested.  Generation of GOTENT reference verified.

This patch is based on Ivan Kokshaysky's alpha percpu patch.

[ Impact: use dynamic percpu allocator ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
---
 arch/s390/Kconfig              |  3 ---
 arch/s390/include/asm/percpu.h | 32 ++++++++------------------------
 2 files changed, 8 insertions(+), 27 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index f4a3cc62d28..a14dba0e4d6 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -75,9 +75,6 @@ config VIRT_CPU_ACCOUNTING
 config ARCH_SUPPORTS_DEBUG_PAGEALLOC
 	def_bool y
 
-config HAVE_LEGACY_PER_CPU_AREA
-	def_bool y
-
 mainmenu "Linux Kernel Configuration"
 
 config S390
diff --git a/arch/s390/include/asm/percpu.h b/arch/s390/include/asm/percpu.h
index 408d60b4f75..f7ad8719d02 100644
--- a/arch/s390/include/asm/percpu.h
+++ b/arch/s390/include/asm/percpu.h
@@ -1,37 +1,21 @@
 #ifndef __ARCH_S390_PERCPU__
 #define __ARCH_S390_PERCPU__
 
-#include <linux/compiler.h>
-#include <asm/lowcore.h>
-
 /*
  * s390 uses its own implementation for per cpu data, the offset of
  * the cpu local data area is cached in the cpu's lowcore memory.
- * For 64 bit module code s390 forces the use of a GOT slot for the
- * address of the per cpu variable. This is needed because the module
- * may be more than 4G above the per cpu area.
  */
-#if defined(__s390x__) && defined(MODULE)
-
-#define SHIFT_PERCPU_PTR(ptr,offset) (({			\
-	extern int simple_identifier_##var(void);	\
-	unsigned long *__ptr;				\
-	asm ( "larl %0, %1@GOTENT"		\
-	    : "=a" (__ptr) : "X" (ptr) );		\
-	(typeof(ptr))((*__ptr) + (offset));	}))
-
-#else
-
-#define SHIFT_PERCPU_PTR(ptr, offset) (({				\
-	extern int simple_identifier_##var(void);		\
-	unsigned long __ptr;					\
-	asm ( "" : "=a" (__ptr) : "0" (ptr) );			\
-	(typeof(ptr)) (__ptr + (offset)); }))
+#define __my_cpu_offset S390_lowcore.percpu_offset
 
+/*
+ * For 64 bit module code, the module may be more than 4G above the
+ * per cpu area, use weak definitions to force the compiler to
+ * generate external references.
+ */
+#if defined(CONFIG_SMP) && defined(__s390x__) && defined(MODULE)
+#define ARCH_NEEDS_WEAK_PER_CPU
 #endif
 
-#define __my_cpu_offset S390_lowcore.percpu_offset
-
 #include <asm-generic/percpu.h>
 
 #endif /* __ARCH_S390_PERCPU__ */
-- 
cgit v1.2.3


From bf4bb2b1f285ec56e7f3cbf0190761b42131871c Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Wed, 24 Jun 2009 16:57:03 +0900
Subject: sparc64: fix build breakage introduced by percpu-convert-most
 patchset

Commit e74e396204bfcb67570ba4517b08f5918e69afea incorrectly added
HAVE_LEGACY_PER_CPU_AREA to sparc64 although it already has been
converted to dynamic percpu allocator.  Drop both
HAVE_{LEGACY|DYNAMIC}_PER_CPU_AREA.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: David Miller <davem@davemloft.net>
---
 arch/sparc/Kconfig | 6 ------
 1 file changed, 6 deletions(-)

(limited to 'arch')

diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 7a8698b913f..4f6ed0f113f 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -92,15 +92,9 @@ config AUDIT_ARCH
 	bool
 	default y
 
-config HAVE_LEGACY_PER_CPU_AREA
-	def_bool y if SPARC64
-
 config HAVE_SETUP_PER_CPU_AREA
 	def_bool y if SPARC64
 
-config HAVE_DYNAMIC_PER_CPU_AREA
-	def_bool y if SPARC64
-
 config GENERIC_HARDIRQS_NO__DO_IRQ
 	bool
 	def_bool y if SPARC64
-- 
cgit v1.2.3


From 2495fbf7effa6868f5d74124ae9b22a57980755b Mon Sep 17 00:00:00 2001
From: "H. Peter Anvin" <hpa@zytor.com>
Date: Fri, 26 Jun 2009 10:53:57 -0700
Subject: x86, setup: remove obsolete pre-Kconfig CONFIG_VIDEO_ variables

There were a set of pre-Kconfig configuration variables defined in the
video code.  There is absolutely no evidence that they have been
tweaked by anybody in modern history, so just get rid of them and hope
nobody notices.  If someone does complain, these should be made real
Kconfig variables.

Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/boot/video-vesa.c |  7 +------
 arch/x86/boot/video-vga.c  | 10 ----------
 arch/x86/boot/video.c      |  5 -----
 arch/x86/boot/video.h      | 20 ++------------------
 4 files changed, 3 insertions(+), 39 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/boot/video-vesa.c b/arch/x86/boot/video-vesa.c
index c700147d6ff..d7ef26ba454 100644
--- a/arch/x86/boot/video-vesa.c
+++ b/arch/x86/boot/video-vesa.c
@@ -31,7 +31,6 @@ static inline void vesa_store_mode_params_graphics(void) {}
 
 static int vesa_probe(void)
 {
-#if defined(CONFIG_VIDEO_VESA) || defined(CONFIG_FIRMWARE_EDID)
 	struct biosregs ireg, oreg;
 	u16 mode;
 	addr_t mode_ptr;
@@ -49,8 +48,7 @@ static int vesa_probe(void)
 	    vginfo.signature != VESA_MAGIC ||
 	    vginfo.version < 0x0102)
 		return 0;	/* Not present */
-#endif /* CONFIG_VIDEO_VESA || CONFIG_FIRMWARE_EDID */
-#ifdef CONFIG_VIDEO_VESA
+
 	set_fs(vginfo.video_mode_ptr.seg);
 	mode_ptr = vginfo.video_mode_ptr.off;
 
@@ -102,9 +100,6 @@ static int vesa_probe(void)
 	}
 
 	return nmodes;
-#else
-	return 0;
-#endif /* CONFIG_VIDEO_VESA */
 }
 
 static int vesa_set_mode(struct mode_info *mode)
diff --git a/arch/x86/boot/video-vga.c b/arch/x86/boot/video-vga.c
index 8f8d827e254..819caa1f200 100644
--- a/arch/x86/boot/video-vga.c
+++ b/arch/x86/boot/video-vga.c
@@ -47,14 +47,6 @@ static u8 vga_set_basic_mode(void)
 
 	initregs(&ireg);
 
-#ifdef CONFIG_VIDEO_400_HACK
-	if (adapter >= ADAPTER_VGA) {
-		ireg.ax = 0x1202;
-		ireg.bx = 0x0030;
-		intcall(0x10, &ireg, NULL);
-	}
-#endif
-
 	ax = 0x0f00;
 	intcall(0x10, &ireg, &oreg);
 	mode = oreg.al;
@@ -62,11 +54,9 @@ static u8 vga_set_basic_mode(void)
 	set_fs(0);
 	rows = rdfs8(0x484);	/* rows minus one */
 
-#ifndef CONFIG_VIDEO_400_HACK
 	if ((oreg.ax == 0x5003 || oreg.ax == 0x5007) &&
 	    (rows == 0 || rows == 24))
 		return mode;
-#endif
 
 	if (mode != 3 && mode != 7)
 		mode = 3;
diff --git a/arch/x86/boot/video.c b/arch/x86/boot/video.c
index bad728b76fc..d42da380249 100644
--- a/arch/x86/boot/video.c
+++ b/arch/x86/boot/video.c
@@ -221,7 +221,6 @@ static unsigned int mode_menu(void)
 	}
 }
 
-#ifdef CONFIG_VIDEO_RETAIN
 /* Save screen content to the heap */
 static struct saved_screen {
 	int x, y;
@@ -299,10 +298,6 @@ static void restore_screen(void)
 	ireg.dl = saved.curx;
 	intcall(0x10, &ireg, NULL);
 }
-#else
-#define save_screen()		((void)0)
-#define restore_screen()	((void)0)
-#endif
 
 void set_video(void)
 {
diff --git a/arch/x86/boot/video.h b/arch/x86/boot/video.h
index 5bb174a997f..ff339c5db31 100644
--- a/arch/x86/boot/video.h
+++ b/arch/x86/boot/video.h
@@ -17,19 +17,8 @@
 
 #include <linux/types.h>
 
-/* Enable autodetection of SVGA adapters and modes. */
-#undef CONFIG_VIDEO_SVGA
-
-/* Enable autodetection of VESA modes */
-#define CONFIG_VIDEO_VESA
-
-/* Retain screen contents when switching modes */
-#define CONFIG_VIDEO_RETAIN
-
-/* Force 400 scan lines for standard modes (hack to fix bad BIOS behaviour */
-#undef CONFIG_VIDEO_400_HACK
-
-/* This code uses an extended set of video mode numbers. These include:
+/*
+ * This code uses an extended set of video mode numbers. These include:
  * Aliases for standard modes
  *      NORMAL_VGA (-1)
  *      EXTENDED_VGA (-2)
@@ -67,13 +56,8 @@
 /* The "recalculate timings" flag */
 #define VIDEO_RECALC 0x8000
 
-/* Define DO_STORE according to CONFIG_VIDEO_RETAIN */
-#ifdef CONFIG_VIDEO_RETAIN
 void store_screen(void);
 #define DO_STORE() store_screen()
-#else
-#define DO_STORE() ((void)0)
-#endif /* CONFIG_VIDEO_RETAIN */
 
 /*
  * Mode table structures
-- 
cgit v1.2.3


From 702b59e623c3ca80beaeab79ca5ede4ea23170e2 Mon Sep 17 00:00:00 2001
From: Hartley Sweeten <hartleys@visionengravers.com>
Date: Fri, 26 Jun 2009 21:36:36 +0100
Subject: [ARM] 5573/1: ep93xx: ensure typesafe io

ARM: ep93xx: ensure typesafe io

For the ep93xx platform, all EP93XX_*_BASE defines are based
on virtual addresses.  Ensure that all these defines are
properly typesafe for the __raw_{read/write}* macros.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h | 61 +++++++++++++------------
 arch/arm/mach-ep93xx/include/mach/io.h          | 17 ++++++-
 2 files changed, 47 insertions(+), 31 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
index 967c079180d..49b256b3ddf 100644
--- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
+++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
@@ -52,40 +52,43 @@
 #define EP93XX_AHB_VIRT_BASE		0xfef00000
 #define EP93XX_AHB_SIZE			0x00100000
 
+#define EP93XX_AHB_IOMEM(x)		IOMEM(EP93XX_AHB_VIRT_BASE + (x))
+
 #define EP93XX_APB_PHYS_BASE		0x80800000
 #define EP93XX_APB_VIRT_BASE		0xfed00000
 #define EP93XX_APB_SIZE			0x00200000
 
+#define EP93XX_APB_IOMEM(x)		IOMEM(EP93XX_APB_VIRT_BASE + (x))
+
 
 /* AHB peripherals */
-#define EP93XX_DMA_BASE			((void __iomem *)		\
-					 (EP93XX_AHB_VIRT_BASE + 0x00000000))
+#define EP93XX_DMA_BASE			EP93XX_AHB_IOMEM(0x00000000)
 
-#define EP93XX_ETHERNET_BASE		(EP93XX_AHB_VIRT_BASE + 0x00010000)
 #define EP93XX_ETHERNET_PHYS_BASE	(EP93XX_AHB_PHYS_BASE + 0x00010000)
+#define EP93XX_ETHERNET_BASE		EP93XX_AHB_IOMEM(0x00010000)
 
-#define EP93XX_USB_BASE			(EP93XX_AHB_VIRT_BASE + 0x00020000)
 #define EP93XX_USB_PHYS_BASE		(EP93XX_AHB_PHYS_BASE + 0x00020000)
+#define EP93XX_USB_BASE			EP93XX_AHB_IOMEM(0x00020000)
 
-#define EP93XX_RASTER_BASE		(EP93XX_AHB_VIRT_BASE + 0x00030000)
+#define EP93XX_RASTER_BASE		EP93XX_AHB_IOMEM(0x00030000)
 
-#define EP93XX_GRAPHICS_ACCEL_BASE	(EP93XX_AHB_VIRT_BASE + 0x00040000)
+#define EP93XX_GRAPHICS_ACCEL_BASE	EP93XX_AHB_IOMEM(0x00040000)
 
-#define EP93XX_SDRAM_CONTROLLER_BASE	(EP93XX_AHB_VIRT_BASE + 0x00060000)
+#define EP93XX_SDRAM_CONTROLLER_BASE	EP93XX_AHB_IOMEM(0x00060000)
 
-#define EP93XX_PCMCIA_CONTROLLER_BASE	(EP93XX_AHB_VIRT_BASE + 0x00080000)
+#define EP93XX_PCMCIA_CONTROLLER_BASE	EP93XX_AHB_IOMEM(0x00080000)
 
-#define EP93XX_BOOT_ROM_BASE		(EP93XX_AHB_VIRT_BASE + 0x00090000)
+#define EP93XX_BOOT_ROM_BASE		EP93XX_AHB_IOMEM(0x00090000)
 
-#define EP93XX_IDE_BASE			(EP93XX_AHB_VIRT_BASE + 0x000a0000)
+#define EP93XX_IDE_BASE			EP93XX_AHB_IOMEM(0x000a0000)
 
-#define EP93XX_VIC1_BASE		(EP93XX_AHB_VIRT_BASE + 0x000b0000)
+#define EP93XX_VIC1_BASE		EP93XX_AHB_IOMEM(0x000b0000)
 
-#define EP93XX_VIC2_BASE		(EP93XX_AHB_VIRT_BASE + 0x000c0000)
+#define EP93XX_VIC2_BASE		EP93XX_AHB_IOMEM(0x000c0000)
 
 
 /* APB peripherals */
-#define EP93XX_TIMER_BASE		(EP93XX_APB_VIRT_BASE + 0x00010000)
+#define EP93XX_TIMER_BASE		EP93XX_APB_IOMEM(0x00010000)
 #define EP93XX_TIMER_REG(x)		(EP93XX_TIMER_BASE + (x))
 #define EP93XX_TIMER1_LOAD		EP93XX_TIMER_REG(0x00)
 #define EP93XX_TIMER1_VALUE		EP93XX_TIMER_REG(0x04)
@@ -102,11 +105,11 @@
 #define EP93XX_TIMER3_CONTROL		EP93XX_TIMER_REG(0x88)
 #define EP93XX_TIMER3_CLEAR		EP93XX_TIMER_REG(0x8c)
 
-#define EP93XX_I2S_BASE			(EP93XX_APB_VIRT_BASE + 0x00020000)
+#define EP93XX_I2S_BASE			EP93XX_APB_IOMEM(0x00020000)
 
-#define EP93XX_SECURITY_BASE		(EP93XX_APB_VIRT_BASE + 0x00030000)
+#define EP93XX_SECURITY_BASE		EP93XX_APB_IOMEM(0x00030000)
 
-#define EP93XX_GPIO_BASE		(EP93XX_APB_VIRT_BASE + 0x00040000)
+#define EP93XX_GPIO_BASE		EP93XX_APB_IOMEM(0x00040000)
 #define EP93XX_GPIO_REG(x)		(EP93XX_GPIO_BASE + (x))
 #define EP93XX_GPIO_F_INT_TYPE1		EP93XX_GPIO_REG(0x4c)
 #define EP93XX_GPIO_F_INT_TYPE2		EP93XX_GPIO_REG(0x50)
@@ -124,32 +127,32 @@
 #define EP93XX_GPIO_B_INT_ENABLE	EP93XX_GPIO_REG(0xb8)
 #define EP93XX_GPIO_B_INT_STATUS	EP93XX_GPIO_REG(0xbc)
 
-#define EP93XX_AAC_BASE			(EP93XX_APB_VIRT_BASE + 0x00080000)
+#define EP93XX_AAC_BASE			EP93XX_APB_IOMEM(0x00080000)
 
-#define EP93XX_SPI_BASE			(EP93XX_APB_VIRT_BASE + 0x000a0000)
+#define EP93XX_SPI_BASE			EP93XX_APB_IOMEM(0x000a0000)
 
-#define EP93XX_IRDA_BASE		(EP93XX_APB_VIRT_BASE + 0x000b0000)
+#define EP93XX_IRDA_BASE		EP93XX_APB_IOMEM(0x000b0000)
 
-#define EP93XX_UART1_BASE		(EP93XX_APB_VIRT_BASE + 0x000c0000)
 #define EP93XX_UART1_PHYS_BASE		(EP93XX_APB_PHYS_BASE + 0x000c0000)
+#define EP93XX_UART1_BASE		EP93XX_APB_IOMEM(0x000c0000)
 
-#define EP93XX_UART2_BASE		(EP93XX_APB_VIRT_BASE + 0x000d0000)
 #define EP93XX_UART2_PHYS_BASE		(EP93XX_APB_PHYS_BASE + 0x000d0000)
+#define EP93XX_UART2_BASE		EP93XX_APB_IOMEM(0x000d0000)
 
-#define EP93XX_UART3_BASE		(EP93XX_APB_VIRT_BASE + 0x000e0000)
 #define EP93XX_UART3_PHYS_BASE		(EP93XX_APB_PHYS_BASE + 0x000e0000)
+#define EP93XX_UART3_BASE		EP93XX_APB_IOMEM(0x000e0000)
 
-#define EP93XX_KEY_MATRIX_BASE		(EP93XX_APB_VIRT_BASE + 0x000f0000)
+#define EP93XX_KEY_MATRIX_BASE		EP93XX_APB_IOMEM(0x000f0000)
 
-#define EP93XX_ADC_BASE			(EP93XX_APB_VIRT_BASE + 0x00100000)
-#define EP93XX_TOUCHSCREEN_BASE		(EP93XX_APB_VIRT_BASE + 0x00100000)
+#define EP93XX_ADC_BASE			EP93XX_APB_IOMEM(0x00100000)
+#define EP93XX_TOUCHSCREEN_BASE		EP93XX_APB_IOMEM(0x00100000)
 
-#define EP93XX_PWM_BASE			(EP93XX_APB_VIRT_BASE + 0x00110000)
+#define EP93XX_PWM_BASE			EP93XX_APB_IOMEM(0x00110000)
 
-#define EP93XX_RTC_BASE			(EP93XX_APB_VIRT_BASE + 0x00120000)
 #define EP93XX_RTC_PHYS_BASE		(EP93XX_APB_PHYS_BASE + 0x00120000)
+#define EP93XX_RTC_BASE			EP93XX_APB_IOMEM(0x00120000)
 
-#define EP93XX_SYSCON_BASE		(EP93XX_APB_VIRT_BASE + 0x00130000)
+#define EP93XX_SYSCON_BASE		EP93XX_APB_IOMEM(0x00130000)
 #define EP93XX_SYSCON_REG(x)		(EP93XX_SYSCON_BASE + (x))
 #define EP93XX_SYSCON_POWER_STATE	EP93XX_SYSCON_REG(0x00)
 #define EP93XX_SYSCON_PWRCNT		EP93XX_SYSCON_REG(0x04)
@@ -179,7 +182,7 @@
 #define EP93XX_SYSCON_DEVICE_CONFIG_U1EN		(1<<18)
 #define EP93XX_SYSCON_SWLOCK		EP93XX_SYSCON_REG(0xc0)
 
-#define EP93XX_WATCHDOG_BASE		(EP93XX_APB_VIRT_BASE + 0x00140000)
+#define EP93XX_WATCHDOG_BASE		EP93XX_APB_IOMEM(0x00140000)
 
 
 #endif
diff --git a/arch/arm/mach-ep93xx/include/mach/io.h b/arch/arm/mach-ep93xx/include/mach/io.h
index fd5f081cc8b..cebcc1c53d6 100644
--- a/arch/arm/mach-ep93xx/include/mach/io.h
+++ b/arch/arm/mach-ep93xx/include/mach/io.h
@@ -1,8 +1,21 @@
 /*
  * arch/arm/mach-ep93xx/include/mach/io.h
  */
+#ifndef __ASM_MACH_IO_H
+#define __ASM_MACH_IO_H
 
 #define IO_SPACE_LIMIT		0xffffffff
 
-#define __io(p)		__typesafe_io(p)
-#define __mem_pci(p)	(p)
+#define __io(p)			__typesafe_io(p)
+#define __mem_pci(p)		(p)
+
+/*
+ * A typesafe __io() variation for variable initialisers
+ */
+#ifdef __ASSEMBLER__
+#define IOMEM(p)		p
+#else
+#define IOMEM(p)		((void __iomem __force *)(p))
+#endif
+
+#endif /* __ASM_MACH_IO_H */
-- 
cgit v1.2.3


From ddf4f3d994651ee2924432a618d9caefed411dc1 Mon Sep 17 00:00:00 2001
From: Hartley Sweeten <hartleys@visionengravers.com>
Date: Fri, 26 Jun 2009 21:39:27 +0100
Subject: [ARM] 5574/1: ep93xx: gpio.c: fix header includes and __iomem
 pointers

Fix ep93xx gpio.c header includes and __iomem pointers.

  1. <linux/gpio.h> should be included instead of <asm/gpio.h>
  2. <mach/hardware.h> should be included instead of <mach/ep93xx-regs.h>
  3. data_reg and data_dir_reg in struct ep93xx_gpio_chip should be
     void __iomem pointers not unsigned int

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ep93xx/gpio.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-ep93xx/gpio.c b/arch/arm/mach-ep93xx/gpio.c
index 482cf3d2fbc..7b7a564916f 100644
--- a/arch/arm/mach-ep93xx/gpio.c
+++ b/arch/arm/mach-ep93xx/gpio.c
@@ -17,15 +17,15 @@
 #include <linux/module.h>
 #include <linux/seq_file.h>
 #include <linux/io.h>
+#include <linux/gpio.h>
 
-#include <mach/ep93xx-regs.h>
-#include <asm/gpio.h>
+#include <mach/hardware.h>
 
 struct ep93xx_gpio_chip {
 	struct gpio_chip	chip;
 
-	unsigned int		data_reg;
-	unsigned int		data_dir_reg;
+	void __iomem		*data_reg;
+	void __iomem		*data_dir_reg;
 };
 
 #define to_ep93xx_gpio_chip(c) container_of(c, struct ep93xx_gpio_chip, chip)
-- 
cgit v1.2.3


From f04989bbf4a40077dc7ddcc3dccde11a5f3e91f2 Mon Sep 17 00:00:00 2001
From: Hartley Sweeten <hartleys@visionengravers.com>
Date: Fri, 26 Jun 2009 21:40:34 +0100
Subject: [ARM] 5575/1: ep93xx: Show gpio interrupt type in debugfs output.

ep93xx: Show gpio interrupt type in debugfs output.

EP93xx uses a private implementation for the debugfs output.
Modify this output so it includes the interrupt type when the
gpio is configured as an interrupt

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ep93xx/gpio.c | 56 +++++++++++++++++++++++++++++++++++++++++----
 1 file changed, 51 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-ep93xx/gpio.c b/arch/arm/mach-ep93xx/gpio.c
index 7b7a564916f..2d83d69e2ee 100644
--- a/arch/arm/mach-ep93xx/gpio.c
+++ b/arch/arm/mach-ep93xx/gpio.c
@@ -111,15 +111,61 @@ static void ep93xx_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
 {
 	struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip);
 	u8 data_reg, data_dir_reg;
-	int i;
+	int gpio, i;
 
 	data_reg = __raw_readb(ep93xx_chip->data_reg);
 	data_dir_reg = __raw_readb(ep93xx_chip->data_dir_reg);
 
-	for (i = 0; i < chip->ngpio; i++)
-		seq_printf(s, "GPIO %s%d: %s %s\n", chip->label, i,
-			   (data_reg & (1 << i)) ? "set" : "clear",
-			   (data_dir_reg & (1 << i)) ? "out" : "in");
+	gpio = ep93xx_chip->chip.base;
+	for (i = 0; i < chip->ngpio; i++, gpio++) {
+		int is_out = data_dir_reg & (1 << i);
+
+		seq_printf(s, " %s%d gpio-%-3d (%-12s) %s %s",
+				chip->label, i, gpio,
+				gpiochip_is_requested(chip, i) ? : "",
+				is_out ? "out" : "in ",
+				(data_reg & (1 << i)) ? "hi" : "lo");
+
+		if (!is_out) {
+			int irq = gpio_to_irq(gpio);
+			struct irq_desc *desc = irq_desc + irq;
+
+			if (irq >= 0 && desc->action) {
+				char *trigger;
+
+				switch (desc->status & IRQ_TYPE_SENSE_MASK) {
+				case IRQ_TYPE_NONE:
+					trigger = "(default)";
+					break;
+				case IRQ_TYPE_EDGE_FALLING:
+					trigger = "edge-falling";
+					break;
+				case IRQ_TYPE_EDGE_RISING:
+					trigger = "edge-rising";
+					break;
+				case IRQ_TYPE_EDGE_BOTH:
+					trigger = "edge-both";
+					break;
+				case IRQ_TYPE_LEVEL_HIGH:
+					trigger = "level-high";
+					break;
+				case IRQ_TYPE_LEVEL_LOW:
+					trigger = "level-low";
+					break;
+				default:
+					trigger = "?trigger?";
+					break;
+				}
+
+				seq_printf(s, " irq-%d %s%s",
+						irq, trigger,
+						(desc->status & IRQ_WAKEUP)
+							? " wakeup" : "");
+			}
+		}
+
+		seq_printf(s, "\n");
+	}
 }
 
 #define EP93XX_GPIO_BANK(name, dr, ddr, base_gpio)			\
-- 
cgit v1.2.3


From 226ddb9833a3c2f1087bfac70659d8e318d3c31f Mon Sep 17 00:00:00 2001
From: Nicolas Ferre <nicolas.ferre@atmel.com>
Date: Wed, 24 Jun 2009 17:13:47 +0100
Subject: [ARM] 5564/1: at91: add gpio button and leds support for at91sam9rlek

This adds input keyboard gpio support on at91sam9rlek board. It adds button 1
and 2 (left and right click).
It also adds gpio leds ds1, ds2 and ds3.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/board-sam9rlek.c | 79 +++++++++++++++++++++++++++++++++++++
 1 file changed, 79 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index 35e12a49d1a..9120d5d3a6f 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -15,6 +15,8 @@
 #include <linux/spi/spi.h>
 #include <linux/fb.h>
 #include <linux/clk.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
 
 #include <video/atmel_lcdc.h>
 
@@ -206,6 +208,79 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data;
 #endif
 
 
+/*
+ * LEDs
+ */
+static struct gpio_led ek_leds[] = {
+	{	/* "bottom" led, green, userled1 to be defined */
+		.name			= "ds1",
+		.gpio			= AT91_PIN_PD15,
+		.active_low		= 1,
+		.default_trigger	= "none",
+	},
+	{	/* "bottom" led, green, userled2 to be defined */
+		.name			= "ds2",
+		.gpio			= AT91_PIN_PD16,
+		.active_low		= 1,
+		.default_trigger	= "none",
+	},
+	{	/* "power" led, yellow */
+		.name			= "ds3",
+		.gpio			= AT91_PIN_PD14,
+		.default_trigger	= "heartbeat",
+	}
+};
+
+
+/*
+ * GPIO Buttons
+ */
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button ek_buttons[] = {
+	{
+		.gpio		= AT91_PIN_PB0,
+		.code		= BTN_2,
+		.desc		= "Right Click",
+		.active_low	= 1,
+		.wakeup		= 1,
+	},
+	{
+		.gpio		= AT91_PIN_PB1,
+		.code		= BTN_1,
+		.desc		= "Left Click",
+		.active_low	= 1,
+		.wakeup		= 1,
+	}
+};
+
+static struct gpio_keys_platform_data ek_button_data = {
+	.buttons	= ek_buttons,
+	.nbuttons	= ARRAY_SIZE(ek_buttons),
+};
+
+static struct platform_device ek_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &ek_button_data,
+	}
+};
+
+static void __init ek_add_device_buttons(void)
+{
+	at91_set_gpio_input(AT91_PIN_PB1, 1);	/* btn1 */
+	at91_set_deglitch(AT91_PIN_PB1, 1);
+	at91_set_gpio_input(AT91_PIN_PB0, 1);	/* btn2 */
+	at91_set_deglitch(AT91_PIN_PB0, 1);
+
+	platform_device_register(&ek_button_device);
+}
+#else
+static void __init ek_add_device_buttons(void) {}
+#endif
+
+
 static void __init ek_board_init(void)
 {
 	/* Serial */
@@ -224,6 +299,10 @@ static void __init ek_board_init(void)
 	at91_add_device_lcdc(&ek_lcdc_data);
 	/* Touch Screen Controller */
 	at91_add_device_tsadcc();
+	/* LEDs */
+	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
+	/* Push Buttons */
+	ek_add_device_buttons();
 }
 
 MACHINE_START(AT91SAM9RLEK, "Atmel AT91SAM9RL-EK")
-- 
cgit v1.2.3


From 7c6425a0404399ba78852ef4108007ecf51ef3dc Mon Sep 17 00:00:00 2001
From: Ryan Mallon <ryan@bluewatersys.com>
Date: Wed, 24 Jun 2009 23:15:23 +0100
Subject: [ARM] 5566/1: Remove at91_gpiolib_request

Remove at91_gpiolib_request. It returns -EPERM if a request pin is not
in GPIO mode, however we want to be able to gpio_request alternative
function pins to reserve them, and in some cases we need to be able to
use the gpiolib functions on alternative function pins.

Signed-off-by: Ryan Mallon <ryan@bluewatersys.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/gpio.c | 15 ---------------
 1 file changed, 15 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c
index f2236f0e101..ae4772e744a 100644
--- a/arch/arm/mach-at91/gpio.c
+++ b/arch/arm/mach-at91/gpio.c
@@ -44,13 +44,11 @@ static int at91_gpiolib_direction_output(struct gpio_chip *chip,
 					 unsigned offset, int val);
 static int at91_gpiolib_direction_input(struct gpio_chip *chip,
 					unsigned offset);
-static int at91_gpiolib_request(struct gpio_chip *chip, unsigned offset);
 
 #define AT91_GPIO_CHIP(name, base_gpio, nr_gpio)			\
 	{								\
 		.chip = {						\
 			.label		  = name,			\
-			.request	  = at91_gpiolib_request,	\
 			.direction_input  = at91_gpiolib_direction_input, \
 			.direction_output = at91_gpiolib_direction_output, \
 			.get		  = at91_gpiolib_get,		\
@@ -588,19 +586,6 @@ static void at91_gpiolib_set(struct gpio_chip *chip, unsigned offset, int val)
 	__raw_writel(mask, pio + (val ? PIO_SODR : PIO_CODR));
 }
 
-static int at91_gpiolib_request(struct gpio_chip *chip, unsigned offset)
-{
-	unsigned pin = chip->base + offset;
-	void __iomem *pio = pin_to_controller(pin);
-	unsigned mask = pin_to_mask(pin);
-
-	/* Cannot request GPIOs that are in alternate function mode */
-	if (!(__raw_readl(pio + PIO_PSR) & mask))
-		return -EPERM;
-
-	return 0;
-}
-
 static void at91_gpiolib_dbg_show(struct seq_file *s, struct gpio_chip *chip)
 {
 	int i;
-- 
cgit v1.2.3


From 2ef9df7ada6b6dd53446a994ef6e3a6ad5a300ef Mon Sep 17 00:00:00 2001
From: Nicolas Ferre <nicolas.ferre@atmel.com>
Date: Fri, 26 Jun 2009 15:36:57 +0100
Subject: [ARM] 5569/1: at91: Support for at91sam9g45: clocks management

Add the at91sam9g45 series support to the AT91 generic clock file.
This takes care of the particularities of the PMC for this series.
It also takes advantage of the management by functionalities of
those PLLs and clocks.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/clock.c | 62 ++++++++++++++++++++++++++++++++++++++--------
 1 file changed, 52 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
index bac578fe0d3..6396680271e 100644
--- a/arch/arm/mach-at91/clock.c
+++ b/arch/arm/mach-at91/clock.c
@@ -47,20 +47,25 @@
  * Chips have some kind of clocks : group them by functionality
  */
 #define cpu_has_utmi()		(  cpu_is_at91cap9() \
-				|| cpu_is_at91sam9rl())
+				|| cpu_is_at91sam9rl() \
+				|| cpu_is_at91sam9g45())
 
-#define cpu_has_800M_plla()	(cpu_is_at91sam9g20())
+#define cpu_has_800M_plla()	(  cpu_is_at91sam9g20() \
+				|| cpu_is_at91sam9g45())
 
-#define cpu_has_pllb()		(!cpu_is_at91sam9rl())
+#define cpu_has_300M_plla()	(0)
 
-#define cpu_has_upll()		(0)
+#define cpu_has_pllb()		(!(cpu_is_at91sam9rl() \
+				|| cpu_is_at91sam9g45()))
+
+#define cpu_has_upll()		(cpu_is_at91sam9g45())
 
 /* USB host HS & FS */
 #define cpu_has_uhp()		(!cpu_is_at91sam9rl())
 
 /* USB device FS only */
-#define cpu_has_udpfs()		(!cpu_is_at91sam9rl())
-
+#define cpu_has_udpfs()		(!(cpu_is_at91sam9rl() \
+				|| cpu_is_at91sam9g45()))
 
 static LIST_HEAD(clocks);
 static DEFINE_SPINLOCK(clk_lock);
@@ -133,6 +138,13 @@ static void pmc_uckr_mode(struct clk *clk, int is_on)
 {
 	unsigned int uckr = at91_sys_read(AT91_CKGR_UCKR);
 
+	if (cpu_is_at91sam9g45()) {
+		if (is_on)
+			uckr |= AT91_PMC_BIASEN;
+		else
+			uckr &= ~AT91_PMC_BIASEN;
+	}
+
 	if (is_on) {
 		is_on = AT91_PMC_LOCKU;
 		at91_sys_write(AT91_CKGR_UCKR, uckr | clk->pmc_mask);
@@ -310,6 +322,7 @@ long clk_round_rate(struct clk *clk, unsigned long rate)
 	unsigned long	flags;
 	unsigned	prescale;
 	unsigned long	actual;
+	unsigned long	prev = ULONG_MAX;
 
 	if (!clk_is_programmable(clk))
 		return -EINVAL;
@@ -317,8 +330,16 @@ long clk_round_rate(struct clk *clk, unsigned long rate)
 
 	actual = clk->parent->rate_hz;
 	for (prescale = 0; prescale < 7; prescale++) {
-		if (actual && actual <= rate)
+		if (actual > rate)
+			prev = actual;
+
+		if (actual && actual <= rate) {
+			if ((prev - rate) < (rate - actual)) {
+				actual = prev;
+				prescale--;
+			}
 			break;
+		}
 		actual >>= 1;
 	}
 
@@ -373,6 +394,10 @@ int clk_set_parent(struct clk *clk, struct clk *parent)
 		return -EBUSY;
 	if (!clk_is_primary(parent) || !clk_is_programmable(clk))
 		return -EINVAL;
+
+	if (cpu_is_at91sam9rl() && parent->id == AT91_PMC_CSS_PLLB)
+		return -EINVAL;
+
 	spin_lock_irqsave(&clk_lock, flags);
 
 	clk->rate_hz = parent->rate_hz;
@@ -637,6 +662,7 @@ int __init at91_clock_init(unsigned long main_clock)
 {
 	unsigned tmp, freq, mckr;
 	int i;
+	int pll_overclock = false;
 
 	/*
 	 * When the bootloader initialized the main oscillator correctly,
@@ -654,12 +680,25 @@ int __init at91_clock_init(unsigned long main_clock)
 
 	/* report if PLLA is more than mildly overclocked */
 	plla.rate_hz = at91_pll_rate(&plla, main_clock, at91_sys_read(AT91_CKGR_PLLAR));
-	if ((!cpu_has_800M_plla() && plla.rate_hz > 209000000)
-	   || (cpu_has_800M_plla() && plla.rate_hz > 800000000))
+	if (cpu_has_300M_plla()) {
+		if (plla.rate_hz > 300000000)
+			pll_overclock = true;
+	} else if (cpu_has_800M_plla()) {
+		if (plla.rate_hz > 800000000)
+			pll_overclock = true;
+	} else {
+		if (plla.rate_hz > 209000000)
+			pll_overclock = true;
+	}
+	if (pll_overclock)
 		pr_info("Clocks: PLLA overclocked, %ld MHz\n", plla.rate_hz / 1000000);
 
+	if (cpu_is_at91sam9g45()) {
+		mckr = at91_sys_read(AT91_PMC_MCKR);
+		plla.rate_hz /= (1 << ((mckr & AT91_PMC_PLLADIV2) >> 12));	/* plla divisor by 2 */
+	}
 
-	if (cpu_has_upll() && !cpu_has_pllb()) {
+	if (!cpu_has_pllb() && cpu_has_upll()) {
 		/* setup UTMI clock as the fourth primary clock
 		 * (instead of pllb) */
 		utmi_clk.type |= CLK_TYPE_PRIMARY;
@@ -701,6 +740,9 @@ int __init at91_clock_init(unsigned long main_clock)
 			freq / ((mckr & AT91_PMC_MDIV) >> 7) : freq;	/* mdiv ; (x >> 7) = ((x >> 8) * 2) */
 		if (mckr & AT91_PMC_PDIV)
 			freq /= 2;		/* processor clock division */
+	} else if (cpu_is_at91sam9g45()) {
+		mck.rate_hz = (mckr & AT91_PMC_MDIV) == AT91SAM9_PMC_MDIV_3 ?
+			freq / 3 : freq / (1 << ((mckr & AT91_PMC_MDIV) >> 8));	/* mdiv */
 	} else {
 		mck.rate_hz = freq / (1 << ((mckr & AT91_PMC_MDIV) >> 8));      /* mdiv */
 	}
-- 
cgit v1.2.3


From fddcc0ae58edefeb7ac1e460411d7dfbe8ebdacc Mon Sep 17 00:00:00 2001
From: Nicolas Ferre <nicolas.ferre@atmel.com>
Date: Fri, 26 Jun 2009 15:36:56 +0100
Subject: [ARM] 5571/1: at91: Basic support for at91sam9g45 series: header
 files.

AT91sam9g45 series is an ARM 926ej-s SOC family clocked at 400/133MHz.
It embedds USB high speed host and device, LCD, DDR2 RAM, and a full set of
peripherals.

Here is the basic header file support for this product series.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/include/mach/at91sam9g45.h      | 138 +++++++++++++++++++
 .../mach-at91/include/mach/at91sam9g45_matrix.h    | 153 +++++++++++++++++++++
 arch/arm/mach-at91/include/mach/cpu.h              |  16 +++
 arch/arm/mach-at91/include/mach/hardware.h         |   2 +
 arch/arm/mach-at91/include/mach/timex.h            |   5 +
 5 files changed, 314 insertions(+)
 create mode 100644 arch/arm/mach-at91/include/mach/at91sam9g45.h
 create mode 100644 arch/arm/mach-at91/include/mach/at91sam9g45_matrix.h

(limited to 'arch')

diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45.h b/arch/arm/mach-at91/include/mach/at91sam9g45.h
new file mode 100644
index 00000000000..2c42cf5f0c5
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91sam9g45.h
@@ -0,0 +1,138 @@
+/*
+ * Chip-specific header file for the AT91SAM9G45 family
+ *
+ *  Copyright (C) 2008-2009 Atmel Corporation.
+ *
+ * Common definitions.
+ * Based on AT91SAM9G45 preliminary datasheet.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9G45_H
+#define AT91SAM9G45_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
+#define AT91_ID_SYS		1	/* System Controller Interrupt */
+#define AT91SAM9G45_ID_PIOA	2	/* Parallel I/O Controller A */
+#define AT91SAM9G45_ID_PIOB	3	/* Parallel I/O Controller B */
+#define AT91SAM9G45_ID_PIOC	4	/* Parallel I/O Controller C */
+#define AT91SAM9G45_ID_PIODE	5	/* Parallel I/O Controller D and E */
+#define AT91SAM9G45_ID_TRNG	6	/* True Random Number Generator */
+#define AT91SAM9G45_ID_US0	7	/* USART 0 */
+#define AT91SAM9G45_ID_US1	8	/* USART 1 */
+#define AT91SAM9G45_ID_US2	9	/* USART 2 */
+#define AT91SAM9G45_ID_US3	10	/* USART 3 */
+#define AT91SAM9G45_ID_MCI0	11	/* High Speed Multimedia Card Interface 0 */
+#define AT91SAM9G45_ID_TWI0	12	/* Two-Wire Interface 0 */
+#define AT91SAM9G45_ID_TWI1	13	/* Two-Wire Interface 1 */
+#define AT91SAM9G45_ID_SPI0	14	/* Serial Peripheral Interface 0 */
+#define AT91SAM9G45_ID_SPI1	15	/* Serial Peripheral Interface 1 */
+#define AT91SAM9G45_ID_SSC0	16	/* Synchronous Serial Controller 0 */
+#define AT91SAM9G45_ID_SSC1	17	/* Synchronous Serial Controller 1 */
+#define AT91SAM9G45_ID_TCB	18	/* Timer Counter 0, 1, 2, 3, 4 and 5 */
+#define AT91SAM9G45_ID_PWMC	19	/* Pulse Width Modulation Controller */
+#define AT91SAM9G45_ID_TSC	20	/* Touch Screen ADC Controller */
+#define AT91SAM9G45_ID_DMA	21	/* DMA Controller */
+#define AT91SAM9G45_ID_UHPHS	22	/* USB Host High Speed */
+#define AT91SAM9G45_ID_LCDC	23	/* LCD Controller */
+#define AT91SAM9G45_ID_AC97C	24	/* AC97 Controller */
+#define AT91SAM9G45_ID_EMAC	25	/* Ethernet MAC */
+#define AT91SAM9G45_ID_ISI	26	/* Image Sensor Interface */
+#define AT91SAM9G45_ID_UDPHS	27	/* USB Device High Speed */
+#define AT91SAM9G45_ID_AESTDESSHA 28	/* AES + T-DES + SHA */
+#define AT91SAM9G45_ID_MCI1	29	/* High Speed Multimedia Card Interface 1 */
+#define AT91SAM9G45_ID_VDEC	30	/* Video Decoder */
+#define AT91SAM9G45_ID_IRQ0	31	/* Advanced Interrupt Controller */
+
+/*
+ * User Peripheral physical base addresses.
+ */
+#define AT91SAM9G45_BASE_UDPHS		0xfff78000
+#define AT91SAM9G45_BASE_TCB0		0xfff7c000
+#define AT91SAM9G45_BASE_TC0		0xfff7c000
+#define AT91SAM9G45_BASE_TC1		0xfff7c040
+#define AT91SAM9G45_BASE_TC2		0xfff7c080
+#define AT91SAM9G45_BASE_MCI0		0xfff80000
+#define AT91SAM9G45_BASE_TWI0		0xfff84000
+#define AT91SAM9G45_BASE_TWI1		0xfff88000
+#define AT91SAM9G45_BASE_US0		0xfff8c000
+#define AT91SAM9G45_BASE_US1		0xfff90000
+#define AT91SAM9G45_BASE_US2		0xfff94000
+#define AT91SAM9G45_BASE_US3		0xfff98000
+#define AT91SAM9G45_BASE_SSC0		0xfff9c000
+#define AT91SAM9G45_BASE_SSC1		0xfffa0000
+#define AT91SAM9G45_BASE_SPI0		0xfffa4000
+#define AT91SAM9G45_BASE_SPI1		0xfffa8000
+#define AT91SAM9G45_BASE_AC97C		0xfffac000
+#define AT91SAM9G45_BASE_TSC		0xfffb0000
+#define AT91SAM9G45_BASE_ISI		0xfffb4000
+#define AT91SAM9G45_BASE_PWMC		0xfffb8000
+#define AT91SAM9G45_BASE_EMAC		0xfffbc000
+#define AT91SAM9G45_BASE_AES		0xfffc0000
+#define AT91SAM9G45_BASE_TDES		0xfffc4000
+#define AT91SAM9G45_BASE_SHA		0xfffc8000
+#define AT91SAM9G45_BASE_TRNG		0xfffcc000
+#define AT91SAM9G45_BASE_MCI1		0xfffd0000
+#define AT91SAM9G45_BASE_TCB1		0xfffd4000
+#define AT91SAM9G45_BASE_TC3		0xfffd4000
+#define AT91SAM9G45_BASE_TC4		0xfffd4040
+#define AT91SAM9G45_BASE_TC5		0xfffd4080
+#define AT91_BASE_SYS			0xffffe200
+
+/*
+ * System Peripherals (offset from AT91_BASE_SYS)
+ */
+#define AT91_ECC	(0xffffe200 - AT91_BASE_SYS)
+#define AT91_DDRSDRC1	(0xffffe400 - AT91_BASE_SYS)
+#define AT91_DDRSDRC0	(0xffffe600 - AT91_BASE_SYS)
+#define AT91_SMC	(0xffffe800 - AT91_BASE_SYS)
+#define AT91_MATRIX	(0xffffea00 - AT91_BASE_SYS)
+#define AT91_DMA	(0xffffec00 - AT91_BASE_SYS)
+#define AT91_DBGU	(0xffffee00 - AT91_BASE_SYS)
+#define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)
+#define AT91_PIOA	(0xfffff200 - AT91_BASE_SYS)
+#define AT91_PIOB	(0xfffff400 - AT91_BASE_SYS)
+#define AT91_PIOC	(0xfffff600 - AT91_BASE_SYS)
+#define AT91_PIOD	(0xfffff800 - AT91_BASE_SYS)
+#define AT91_PIOE	(0xfffffa00 - AT91_BASE_SYS)
+#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
+#define AT91_RSTC	(0xfffffd00 - AT91_BASE_SYS)
+#define AT91_SHDWC	(0xfffffd10 - AT91_BASE_SYS)
+#define AT91_RTT	(0xfffffd20 - AT91_BASE_SYS)
+#define AT91_PIT	(0xfffffd30 - AT91_BASE_SYS)
+#define AT91_WDT	(0xfffffd40 - AT91_BASE_SYS)
+#define AT91_GPBR	(0xfffffd60 - AT91_BASE_SYS)
+#define AT91_RTC	(0xfffffdb0 - AT91_BASE_SYS)
+
+#define AT91_USART0	AT91SAM9G45_BASE_US0
+#define AT91_USART1	AT91SAM9G45_BASE_US1
+#define AT91_USART2	AT91SAM9G45_BASE_US2
+#define AT91_USART3	AT91SAM9G45_BASE_US3
+
+/*
+ * Internal Memory.
+ */
+#define AT91SAM9G45_SRAM_BASE	0x00300000	/* Internal SRAM base address */
+#define AT91SAM9G45_SRAM_SIZE	SZ_64K		/* Internal SRAM size (64Kb) */
+
+#define AT91SAM9G45_ROM_BASE	0x00400000	/* Internal ROM base address */
+#define AT91SAM9G45_ROM_SIZE	SZ_64K		/* Internal ROM size (64Kb) */
+
+#define AT91SAM9G45_LCDC_BASE	0x00500000	/* LCD Controller */
+#define AT91SAM9G45_UDPHS_FIFO	0x00600000	/* USB Device HS controller */
+#define AT91SAM9G45_OHCI_BASE	0x00700000	/* USB Host controller (OHCI) */
+#define AT91SAM9G45_EHCI_BASE	0x00800000	/* USB Host controller (EHCI) */
+#define AT91SAM9G45_VDEC_BASE	0x00900000	/* Video Decoder Controller */
+
+#define CONFIG_DRAM_BASE	AT91_CHIPSELECT_6
+
+#define CONSISTENT_DMA_SIZE	SZ_4M
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9g45_matrix.h
new file mode 100644
index 00000000000..c972d60e0ae
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91sam9g45_matrix.h
@@ -0,0 +1,153 @@
+/*
+ * Matrix-centric header file for the AT91SAM9G45 family
+ *
+ *  Copyright (C) 2008-2009 Atmel Corporation.
+ *
+ * Memory Controllers (MATRIX, EBI) - System peripherals registers.
+ * Based on AT91SAM9G45 preliminary datasheet.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9G45_MATRIX_H
+#define AT91SAM9G45_MATRIX_H
+
+#define AT91_MATRIX_MCFG0	(AT91_MATRIX + 0x00)	/* Master Configuration Register 0 */
+#define AT91_MATRIX_MCFG1	(AT91_MATRIX + 0x04)	/* Master Configuration Register 1 */
+#define AT91_MATRIX_MCFG2	(AT91_MATRIX + 0x08)	/* Master Configuration Register 2 */
+#define AT91_MATRIX_MCFG3	(AT91_MATRIX + 0x0C)	/* Master Configuration Register 3 */
+#define AT91_MATRIX_MCFG4	(AT91_MATRIX + 0x10)	/* Master Configuration Register 4 */
+#define AT91_MATRIX_MCFG5	(AT91_MATRIX + 0x14)	/* Master Configuration Register 5 */
+#define AT91_MATRIX_MCFG6	(AT91_MATRIX + 0x18)	/* Master Configuration Register 6 */
+#define AT91_MATRIX_MCFG7	(AT91_MATRIX + 0x1C)	/* Master Configuration Register 7 */
+#define AT91_MATRIX_MCFG8	(AT91_MATRIX + 0x20)	/* Master Configuration Register 8 */
+#define AT91_MATRIX_MCFG9	(AT91_MATRIX + 0x24)	/* Master Configuration Register 9 */
+#define AT91_MATRIX_MCFG10	(AT91_MATRIX + 0x28)	/* Master Configuration Register 10 */
+#define AT91_MATRIX_MCFG11	(AT91_MATRIX + 0x2C)	/* Master Configuration Register 11 */
+#define		AT91_MATRIX_ULBT	(7 << 0)	/* Undefined Length Burst Type */
+#define			AT91_MATRIX_ULBT_INFINITE	(0 << 0)
+#define			AT91_MATRIX_ULBT_SINGLE		(1 << 0)
+#define			AT91_MATRIX_ULBT_FOUR		(2 << 0)
+#define			AT91_MATRIX_ULBT_EIGHT		(3 << 0)
+#define			AT91_MATRIX_ULBT_SIXTEEN	(4 << 0)
+#define			AT91_MATRIX_ULBT_THIRTYTWO	(5 << 0)
+#define			AT91_MATRIX_ULBT_SIXTYFOUR	(6 << 0)
+#define			AT91_MATRIX_ULBT_128		(7 << 0)
+
+#define AT91_MATRIX_SCFG0	(AT91_MATRIX + 0x40)	/* Slave Configuration Register 0 */
+#define AT91_MATRIX_SCFG1	(AT91_MATRIX + 0x44)	/* Slave Configuration Register 1 */
+#define AT91_MATRIX_SCFG2	(AT91_MATRIX + 0x48)	/* Slave Configuration Register 2 */
+#define AT91_MATRIX_SCFG3	(AT91_MATRIX + 0x4C)	/* Slave Configuration Register 3 */
+#define AT91_MATRIX_SCFG4	(AT91_MATRIX + 0x50)	/* Slave Configuration Register 4 */
+#define AT91_MATRIX_SCFG5	(AT91_MATRIX + 0x54)	/* Slave Configuration Register 5 */
+#define AT91_MATRIX_SCFG6	(AT91_MATRIX + 0x58)	/* Slave Configuration Register 6 */
+#define AT91_MATRIX_SCFG7	(AT91_MATRIX + 0x5C)	/* Slave Configuration Register 7 */
+#define		AT91_MATRIX_SLOT_CYCLE		(0x1ff << 0)	/* Maximum Number of Allowed Cycles for a Burst */
+#define		AT91_MATRIX_DEFMSTR_TYPE	(3    << 16)	/* Default Master Type */
+#define			AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
+#define			AT91_MATRIX_DEFMSTR_TYPE_LAST	(1 << 16)
+#define			AT91_MATRIX_DEFMSTR_TYPE_FIXED	(2 << 16)
+#define		AT91_MATRIX_FIXED_DEFMSTR	(0xf  << 18)	/* Fixed Index of Default Master */
+
+#define AT91_MATRIX_PRAS0	(AT91_MATRIX + 0x80)	/* Priority Register A for Slave 0 */
+#define AT91_MATRIX_PRBS0	(AT91_MATRIX + 0x84)	/* Priority Register B for Slave 0 */
+#define AT91_MATRIX_PRAS1	(AT91_MATRIX + 0x88)	/* Priority Register A for Slave 1 */
+#define AT91_MATRIX_PRBS1	(AT91_MATRIX + 0x8C)	/* Priority Register B for Slave 1 */
+#define AT91_MATRIX_PRAS2	(AT91_MATRIX + 0x90)	/* Priority Register A for Slave 2 */
+#define AT91_MATRIX_PRBS2	(AT91_MATRIX + 0x94)	/* Priority Register B for Slave 2 */
+#define AT91_MATRIX_PRAS3	(AT91_MATRIX + 0x98)	/* Priority Register A for Slave 3 */
+#define AT91_MATRIX_PRBS3	(AT91_MATRIX + 0x9C)	/* Priority Register B for Slave 3 */
+#define AT91_MATRIX_PRAS4	(AT91_MATRIX + 0xA0)	/* Priority Register A for Slave 4 */
+#define AT91_MATRIX_PRBS4	(AT91_MATRIX + 0xA4)	/* Priority Register B for Slave 4 */
+#define AT91_MATRIX_PRAS5	(AT91_MATRIX + 0xA8)	/* Priority Register A for Slave 5 */
+#define AT91_MATRIX_PRBS5	(AT91_MATRIX + 0xAC)	/* Priority Register B for Slave 5 */
+#define AT91_MATRIX_PRAS6	(AT91_MATRIX + 0xB0)	/* Priority Register A for Slave 6 */
+#define AT91_MATRIX_PRBS6	(AT91_MATRIX + 0xB4)	/* Priority Register B for Slave 6 */
+#define AT91_MATRIX_PRAS7	(AT91_MATRIX + 0xB8)	/* Priority Register A for Slave 7 */
+#define AT91_MATRIX_PRBS7	(AT91_MATRIX + 0xBC)	/* Priority Register B for Slave 7 */
+#define		AT91_MATRIX_M0PR		(3 << 0)	/* Master 0 Priority */
+#define		AT91_MATRIX_M1PR		(3 << 4)	/* Master 1 Priority */
+#define		AT91_MATRIX_M2PR		(3 << 8)	/* Master 2 Priority */
+#define		AT91_MATRIX_M3PR		(3 << 12)	/* Master 3 Priority */
+#define		AT91_MATRIX_M4PR		(3 << 16)	/* Master 4 Priority */
+#define		AT91_MATRIX_M5PR		(3 << 20)	/* Master 5 Priority */
+#define		AT91_MATRIX_M6PR		(3 << 24)	/* Master 6 Priority */
+#define		AT91_MATRIX_M7PR		(3 << 28)	/* Master 7 Priority */
+#define		AT91_MATRIX_M8PR		(3 << 0)	/* Master 8 Priority (in Register B) */
+#define		AT91_MATRIX_M9PR		(3 << 4)	/* Master 9 Priority (in Register B) */
+#define		AT91_MATRIX_M10PR		(3 << 8)	/* Master 10 Priority (in Register B) */
+#define		AT91_MATRIX_M11PR		(3 << 12)	/* Master 11 Priority (in Register B) */
+
+#define AT91_MATRIX_MRCR	(AT91_MATRIX + 0x100)	/* Master Remap Control Register */
+#define		AT91_MATRIX_RCB0		(1 << 0)	/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
+#define		AT91_MATRIX_RCB1		(1 << 1)	/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
+#define		AT91_MATRIX_RCB2		(1 << 2)
+#define		AT91_MATRIX_RCB3		(1 << 3)
+#define		AT91_MATRIX_RCB4		(1 << 4)
+#define		AT91_MATRIX_RCB5		(1 << 5)
+#define		AT91_MATRIX_RCB6		(1 << 6)
+#define		AT91_MATRIX_RCB7		(1 << 7)
+#define		AT91_MATRIX_RCB8		(1 << 8)
+#define		AT91_MATRIX_RCB9		(1 << 9)
+#define		AT91_MATRIX_RCB10		(1 << 10)
+#define		AT91_MATRIX_RCB11		(1 << 11)
+
+#define AT91_MATRIX_TCMR	(AT91_MATRIX + 0x110)	/* TCM Configuration Register */
+#define		AT91_MATRIX_ITCM_SIZE		(0xf << 0)	/* Size of ITCM enabled memory block */
+#define			AT91_MATRIX_ITCM_0		(0 << 0)
+#define			AT91_MATRIX_ITCM_32		(6 << 0)
+#define		AT91_MATRIX_DTCM_SIZE		(0xf << 4)	/* Size of DTCM enabled memory block */
+#define			AT91_MATRIX_DTCM_0		(0 << 4)
+#define			AT91_MATRIX_DTCM_32		(6 << 4)
+#define			AT91_MATRIX_DTCM_64		(7 << 4)
+#define		AT91_MATRIX_TCM_NWS		(0x1 << 11)	/* Wait state TCM register */
+#define			AT91_MATRIX_TCM_NO_WS		(0x0 << 11)
+#define			AT91_MATRIX_TCM_ONE_WS		(0x1 << 11)
+
+#define AT91_MATRIX_VIDEO	(AT91_MATRIX + 0x118)	/* Video Mode Configuration Register */
+#define		AT91C_VDEC_SEL			(0x1 <<  0) /* Video Mode Selection */
+#define			AT91C_VDEC_SEL_OFF		(0 << 0)
+#define			AT91C_VDEC_SEL_ON		(1 << 0)
+
+#define AT91_MATRIX_EBICSA	(AT91_MATRIX + 0x128)	/* EBI Chip Select Assignment Register */
+#define		AT91_MATRIX_EBI_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
+#define			AT91_MATRIX_EBI_CS1A_SMC		(0 << 1)
+#define			AT91_MATRIX_EBI_CS1A_SDRAMC		(1 << 1)
+#define		AT91_MATRIX_EBI_CS3A		(1 << 3)	/* Chip Select 3 Assignment */
+#define			AT91_MATRIX_EBI_CS3A_SMC		(0 << 3)
+#define			AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA	(1 << 3)
+#define		AT91_MATRIX_EBI_CS4A		(1 << 4)	/* Chip Select 4 Assignment */
+#define			AT91_MATRIX_EBI_CS4A_SMC		(0 << 4)
+#define			AT91_MATRIX_EBI_CS4A_SMC_CF0		(1 << 4)
+#define		AT91_MATRIX_EBI_CS5A		(1 << 5)	/* Chip Select 5 Assignment */
+#define			AT91_MATRIX_EBI_CS5A_SMC		(0 << 5)
+#define			AT91_MATRIX_EBI_CS5A_SMC_CF1		(1 << 5)
+#define		AT91_MATRIX_EBI_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
+#define			AT91_MATRIX_EBI_DBPU_ON			(0 << 8)
+#define			AT91_MATRIX_EBI_DBPU_OFF		(1 << 8)
+#define		AT91_MATRIX_EBI_VDDIOMSEL	(1 << 16)	/* Memory voltage selection */
+#define			AT91_MATRIX_EBI_VDDIOMSEL_1_8V		(0 << 16)
+#define			AT91_MATRIX_EBI_VDDIOMSEL_3_3V		(1 << 16)
+#define		AT91_MATRIX_EBI_EBI_IOSR	(1 << 17)	/* EBI I/O slew rate selection */
+#define			AT91_MATRIX_EBI_EBI_IOSR_REDUCED	(0 << 17)
+#define			AT91_MATRIX_EBI_EBI_IOSR_NORMAL		(1 << 17)
+#define		AT91_MATRIX_EBI_DDR_IOSR	(1 << 18)	/* DDR2 dedicated port I/O slew rate selection */
+#define			AT91_MATRIX_EBI_DDR_IOSR_REDUCED	(0 << 18)
+#define			AT91_MATRIX_EBI_DDR_IOSR_NORMAL		(1 << 18)
+
+#define AT91_MATRIX_WPMR	(AT91_MATRIX + 0x1E4)	/* Write Protect Mode Register */
+#define		AT91_MATRIX_WPMR_WPEN		(1 << 0)	/* Write Protect ENable */
+#define			AT91_MATRIX_WPMR_WP_WPDIS		(0 << 0)
+#define			AT91_MATRIX_WPMR_WP_WPEN		(1 << 0)
+#define		AT91_MATRIX_WPMR_WPKEY		(0xFFFFFF << 8)	/* Write Protect KEY */
+
+#define AT91_MATRIX_WPSR	(AT91_MATRIX + 0x1E8)	/* Write Protect Status Register */
+#define		AT91_MATRIX_WPSR_WPVS		(1 << 0)	/* Write Protect Violation Status */
+#define			AT91_MATRIX_WPSR_NO_WPV		(0 << 0)
+#define			AT91_MATRIX_WPSR_WPV		(1 << 0)
+#define		AT91_MATRIX_WPSR_WPVSRC		(0xFFFF << 8)	/* Write Protect Violation Source */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h
index c554c3e4d55..b73e7bf097d 100644
--- a/arch/arm/mach-at91/include/mach/cpu.h
+++ b/arch/arm/mach-at91/include/mach/cpu.h
@@ -23,6 +23,7 @@
 #define ARCH_ID_AT91SAM9263	0x019607a0
 #define ARCH_ID_AT91SAM9G20	0x019905a0
 #define ARCH_ID_AT91SAM9RL64	0x019b03a0
+#define ARCH_ID_AT91SAM9G45	0x819b05a0
 #define ARCH_ID_AT91CAP9	0x039A03A0
 
 #define ARCH_ID_AT91SAM9XE128	0x329973a0
@@ -39,6 +40,15 @@ static inline unsigned long at91_cpu_identify(void)
 	return (at91_sys_read(AT91_DBGU_CIDR) & ~AT91_CIDR_VERSION);
 }
 
+#define ARCH_EXID_AT91SAM9M11	0x00000001
+#define ARCH_EXID_AT91SAM9M10	0x00000002
+#define ARCH_EXID_AT91SAM9G45	0x00000004
+
+static inline unsigned long at91_exid_identify(void)
+{
+	return at91_sys_read(AT91_DBGU_EXID);
+}
+
 
 #define ARCH_FAMILY_AT91X92	0x09200000
 #define ARCH_FAMILY_AT91SAM9	0x01900000
@@ -99,6 +109,12 @@ static inline unsigned long at91cap9_rev_identify(void)
 #define cpu_is_at91sam9rl()	(0)
 #endif
 
+#ifdef CONFIG_ARCH_AT91SAM9G45
+#define cpu_is_at91sam9g45()	(at91_cpu_identify() == ARCH_ID_AT91SAM9G45)
+#else
+#define cpu_is_at91sam9g45()	(0)
+#endif
+
 #ifdef CONFIG_ARCH_AT91CAP9
 #define cpu_is_at91cap9()	(at91_cpu_identify() == ARCH_ID_AT91CAP9)
 #define cpu_is_at91cap9_revB()	(at91cap9_rev_identify() == ARCH_REVISION_CAP9_B)
diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h
index da0b681c652..f0869170fa0 100644
--- a/arch/arm/mach-at91/include/mach/hardware.h
+++ b/arch/arm/mach-at91/include/mach/hardware.h
@@ -26,6 +26,8 @@
 #include <mach/at91sam9263.h>
 #elif defined(CONFIG_ARCH_AT91SAM9RL)
 #include <mach/at91sam9rl.h>
+#elif defined(CONFIG_ARCH_AT91SAM9G45)
+#include <mach/at91sam9g45.h>
 #elif defined(CONFIG_ARCH_AT91CAP9)
 #include <mach/at91cap9.h>
 #elif defined(CONFIG_ARCH_AT91X40)
diff --git a/arch/arm/mach-at91/include/mach/timex.h b/arch/arm/mach-at91/include/mach/timex.h
index d84c9948bec..38f6c4250c7 100644
--- a/arch/arm/mach-at91/include/mach/timex.h
+++ b/arch/arm/mach-at91/include/mach/timex.h
@@ -62,6 +62,11 @@
 #define AT91SAM9_MASTER_CLOCK	132096000
 #define CLOCK_TICK_RATE		(AT91SAM9_MASTER_CLOCK/16)
 
+#elif defined(CONFIG_ARCH_AT91SAM9G45)
+
+#define AT91SAM9_MASTER_CLOCK	133333333
+#define CLOCK_TICK_RATE		(AT91SAM9_MASTER_CLOCK/16)
+
 #elif defined(CONFIG_ARCH_AT91CAP9)
 
 #define AT91CAP9_MASTER_CLOCK	100000000
-- 
cgit v1.2.3


From 789b23bc40a67d9a19bedc2655c6bcab79bcabd8 Mon Sep 17 00:00:00 2001
From: Nicolas Ferre <nicolas.ferre@atmel.com>
Date: Fri, 26 Jun 2009 15:36:58 +0100
Subject: [ARM] 5572/1: at91: Support for at91sam9g45 series: core chip & board
 support

Here are the at91 specific files dedicated to the at91sam9g45 series. They
mimic the traditional at91 way of managing chips & boards.

The first board that embeds at91sam9g45 chip is the AT91SAM9G45-EKES. In
the future, the main board for this 9g45 series will be the
AT91SAM9M10G45-EK (I choose this last name for the board file).

Simple drivers are enabled in _devices and board- files. Newer peripheral
support will be added in future patches.

Incuded peripherals support (for now):
- USART
- SPI
- Ethernet
- NAND flash
- LCD
- gpio/joystick/buttons
- leds and pwm

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/Kconfig               |   26 +-
 arch/arm/mach-at91/Makefile              |    4 +
 arch/arm/mach-at91/Makefile.boot         |    4 +
 arch/arm/mach-at91/at91sam9g45.c         |  360 +++++++++
 arch/arm/mach-at91/at91sam9g45_devices.c | 1230 ++++++++++++++++++++++++++++++
 arch/arm/mach-at91/board-sam9m10g45ek.c  |  389 ++++++++++
 arch/arm/mach-at91/generic.h             |    2 +
 arch/arm/mach-at91/include/mach/board.h  |    8 +-
 8 files changed, 2020 insertions(+), 3 deletions(-)
 create mode 100644 arch/arm/mach-at91/at91sam9g45.c
 create mode 100644 arch/arm/mach-at91/at91sam9g45_devices.c
 create mode 100644 arch/arm/mach-at91/board-sam9m10g45ek.c

(limited to 'arch')

diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 323b47f2b52..22309ba97fa 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -41,6 +41,12 @@ config ARCH_AT91SAM9G20
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 
+config ARCH_AT91SAM9G45
+	bool "AT91SAM9G45"
+	select CPU_ARM926T
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+
 config ARCH_AT91CAP9
 	bool "AT91CAP9"
 	select CPU_ARM926T
@@ -280,6 +286,22 @@ endif
 
 # ----------------------------------------------------------
 
+if ARCH_AT91SAM9G45
+
+comment "AT91SAM9G45 Board Type"
+
+config MACH_AT91SAM9G45EKES
+	bool "Atmel AT91SAM9G45-EKES Evaluation Kit"
+	depends on ARCH_AT91SAM9G45
+	help
+	  Select this if you are using Atmel's AT91SAM9G45-EKES Evaluation Kit.
+	  "ES" at the end of the name means that this board is an
+	  Engineering Sample.
+
+endif
+
+# ----------------------------------------------------------
+
 if ARCH_AT91CAP9
 
 comment "AT91CAP9 Board Type"
@@ -321,7 +343,7 @@ config MTD_AT91_DATAFLASH_CARD
 
 config MTD_NAND_ATMEL_BUSWIDTH_16
 	bool "Enable 16-bit data bus interface to NAND flash"
-	depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91CAP9ADK)
+	depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91SAM9G45EKES || MACH_AT91CAP9ADK)
 	help
 	  On AT91SAM926x boards both types of NAND flash can be present
 	  (8 and 16 bit data bus width).
@@ -383,7 +405,7 @@ config AT91_EARLY_USART2
 
 config AT91_EARLY_USART3
 	bool "USART3"
-	depends on (ARCH_AT91RM9200 || ARCH_AT91SAM9RL || ARCH_AT91SAM9260 || ARCH_AT91SAM9G20)
+	depends on (ARCH_AT91RM9200 || ARCH_AT91SAM9RL || ARCH_AT91SAM9260 || ARCH_AT91SAM9G20 || ARCH_AT91SAM9G45)
 
 config AT91_EARLY_USART4
 	bool "USART4"
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index c69ff237fd1..2975f9ab861 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_ARCH_AT91SAM9261)	+= at91sam9261.o at91sam926x_time.o at91sam9261_d
 obj-$(CONFIG_ARCH_AT91SAM9263)	+= at91sam9263.o at91sam926x_time.o at91sam9263_devices.o sam9_smc.o
 obj-$(CONFIG_ARCH_AT91SAM9RL)	+= at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o sam9_smc.o
 obj-$(CONFIG_ARCH_AT91SAM9G20)	+= at91sam9260.o at91sam926x_time.o at91sam9260_devices.o  sam9_smc.o
+ obj-$(CONFIG_ARCH_AT91SAM9G45)	+= at91sam9g45.o at91sam926x_time.o at91sam9g45_devices.o sam9_smc.o
 obj-$(CONFIG_ARCH_AT91CAP9)	+= at91cap9.o at91sam926x_time.o at91cap9_devices.o sam9_smc.o
 obj-$(CONFIG_ARCH_AT91X40)	+= at91x40.o at91x40_time.o
 
@@ -55,6 +56,9 @@ obj-$(CONFIG_MACH_AT91SAM9RLEK)	+= board-sam9rlek.o
 # AT91SAM9G20 board-specific support
 obj-$(CONFIG_MACH_AT91SAM9G20EK) += board-sam9g20ek.o
 
+# AT91SAM9G45 board-specific support
+obj-$(CONFIG_MACH_AT91SAM9G45EKES) += board-sam9m10g45ek.o
+
 # AT91CAP9 board-specific support
 obj-$(CONFIG_MACH_AT91CAP9ADK)	+= board-cap9adk.o
 
diff --git a/arch/arm/mach-at91/Makefile.boot b/arch/arm/mach-at91/Makefile.boot
index 071a2506a69..3462b815054 100644
--- a/arch/arm/mach-at91/Makefile.boot
+++ b/arch/arm/mach-at91/Makefile.boot
@@ -7,6 +7,10 @@ ifeq ($(CONFIG_ARCH_AT91CAP9),y)
    zreladdr-y	:= 0x70008000
 params_phys-y	:= 0x70000100
 initrd_phys-y	:= 0x70410000
+else ifeq ($(CONFIG_ARCH_AT91SAM9G45),y)
+   zreladdr-y	:= 0x70008000
+params_phys-y	:= 0x70000100
+initrd_phys-y	:= 0x70410000
 else
    zreladdr-y	:= 0x20008000
 params_phys-y	:= 0x20000100
diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
new file mode 100644
index 00000000000..85166b7e69a
--- /dev/null
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -0,0 +1,360 @@
+/*
+ *  Chip-specific setup code for the AT91SAM9G45 family
+ *
+ *  Copyright (C) 2009 Atmel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/pm.h>
+
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <mach/at91sam9g45.h>
+#include <mach/at91_pmc.h>
+#include <mach/at91_rstc.h>
+#include <mach/at91_shdwc.h>
+
+#include "generic.h"
+#include "clock.h"
+
+static struct map_desc at91sam9g45_io_desc[] __initdata = {
+	{
+		.virtual	= AT91_VA_BASE_SYS,
+		.pfn		= __phys_to_pfn(AT91_BASE_SYS),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= AT91_IO_VIRT_BASE - AT91SAM9G45_SRAM_SIZE,
+		.pfn		= __phys_to_pfn(AT91SAM9G45_SRAM_BASE),
+		.length		= AT91SAM9G45_SRAM_SIZE,
+		.type		= MT_DEVICE,
+	}
+};
+
+/* --------------------------------------------------------------------
+ *  Clocks
+ * -------------------------------------------------------------------- */
+
+/*
+ * The peripheral clocks.
+ */
+static struct clk pioA_clk = {
+	.name		= "pioA_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_PIOA,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioB_clk = {
+	.name		= "pioB_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_PIOB,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioC_clk = {
+	.name		= "pioC_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_PIOC,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioDE_clk = {
+	.name		= "pioDE_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_PIODE,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart0_clk = {
+	.name		= "usart0_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_US0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart1_clk = {
+	.name		= "usart1_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_US1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart2_clk = {
+	.name		= "usart2_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_US2,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart3_clk = {
+	.name		= "usart3_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_US3,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk mmc0_clk = {
+	.name		= "mci0_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_MCI0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk twi0_clk = {
+	.name		= "twi0_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_TWI0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk twi1_clk = {
+	.name		= "twi1_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_TWI1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi0_clk = {
+	.name		= "spi0_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_SPI0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi1_clk = {
+	.name		= "spi1_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_SPI1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk ssc0_clk = {
+	.name		= "ssc0_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_SSC0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk ssc1_clk = {
+	.name		= "ssc1_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_SSC1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tcb_clk = {
+	.name		= "tcb_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_TCB,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk pwm_clk = {
+	.name		= "pwm_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_PWMC,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tsc_clk = {
+	.name		= "tsc_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_TSC,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk dma_clk = {
+	.name		= "dma_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_DMA,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk uhphs_clk = {
+	.name		= "uhphs_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_UHPHS,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk lcdc_clk = {
+	.name		= "lcdc_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_LCDC,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk ac97_clk = {
+	.name		= "ac97_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_AC97C,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk macb_clk = {
+	.name		= "macb_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_EMAC,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk isi_clk = {
+	.name		= "isi_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_ISI,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk udphs_clk = {
+	.name		= "udphs_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_UDPHS,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk mmc1_clk = {
+	.name		= "mci1_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_MCI1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+
+/* One additional fake clock for ohci */
+static struct clk ohci_clk = {
+	.name		= "ohci_clk",
+	.pmc_mask	= 0,
+	.type		= CLK_TYPE_PERIPHERAL,
+	.parent		= &uhphs_clk,
+};
+
+static struct clk *periph_clocks[] __initdata = {
+	&pioA_clk,
+	&pioB_clk,
+	&pioC_clk,
+	&pioDE_clk,
+	&usart0_clk,
+	&usart1_clk,
+	&usart2_clk,
+	&usart3_clk,
+	&mmc0_clk,
+	&twi0_clk,
+	&twi1_clk,
+	&spi0_clk,
+	&spi1_clk,
+	&ssc0_clk,
+	&ssc1_clk,
+	&tcb_clk,
+	&pwm_clk,
+	&tsc_clk,
+	&dma_clk,
+	&uhphs_clk,
+	&lcdc_clk,
+	&ac97_clk,
+	&macb_clk,
+	&isi_clk,
+	&udphs_clk,
+	&mmc1_clk,
+	// irq0
+	&ohci_clk,
+};
+
+/*
+ * The two programmable clocks.
+ * You must configure pin multiplexing to bring these signals out.
+ */
+static struct clk pck0 = {
+	.name		= "pck0",
+	.pmc_mask	= AT91_PMC_PCK0,
+	.type		= CLK_TYPE_PROGRAMMABLE,
+	.id		= 0,
+};
+static struct clk pck1 = {
+	.name		= "pck1",
+	.pmc_mask	= AT91_PMC_PCK1,
+	.type		= CLK_TYPE_PROGRAMMABLE,
+	.id		= 1,
+};
+
+static void __init at91sam9g45_register_clocks(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
+		clk_register(periph_clocks[i]);
+
+	clk_register(&pck0);
+	clk_register(&pck1);
+}
+
+/* --------------------------------------------------------------------
+ *  GPIO
+ * -------------------------------------------------------------------- */
+
+static struct at91_gpio_bank at91sam9g45_gpio[] = {
+	{
+		.id		= AT91SAM9G45_ID_PIOA,
+		.offset		= AT91_PIOA,
+		.clock		= &pioA_clk,
+	}, {
+		.id		= AT91SAM9G45_ID_PIOB,
+		.offset		= AT91_PIOB,
+		.clock		= &pioB_clk,
+	}, {
+		.id		= AT91SAM9G45_ID_PIOC,
+		.offset		= AT91_PIOC,
+		.clock		= &pioC_clk,
+	}, {
+		.id		= AT91SAM9G45_ID_PIODE,
+		.offset		= AT91_PIOD,
+		.clock		= &pioDE_clk,
+	}, {
+		.id		= AT91SAM9G45_ID_PIODE,
+		.offset		= AT91_PIOE,
+		.clock		= &pioDE_clk,
+	}
+};
+
+static void at91sam9g45_reset(void)
+{
+	at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
+}
+
+static void at91sam9g45_poweroff(void)
+{
+	at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW);
+}
+
+
+/* --------------------------------------------------------------------
+ *  AT91SAM9G45 processor initialization
+ * -------------------------------------------------------------------- */
+
+void __init at91sam9g45_initialize(unsigned long main_clock)
+{
+	/* Map peripherals */
+	iotable_init(at91sam9g45_io_desc, ARRAY_SIZE(at91sam9g45_io_desc));
+
+	at91_arch_reset = at91sam9g45_reset;
+	pm_power_off = at91sam9g45_poweroff;
+	at91_extern_irq = (1 << AT91SAM9G45_ID_IRQ0);
+
+	/* Init clock subsystem */
+	at91_clock_init(main_clock);
+
+	/* Register the processor-specific clocks */
+	at91sam9g45_register_clocks();
+
+	/* Register GPIO subsystem */
+	at91_gpio_init(at91sam9g45_gpio, 5);
+}
+
+/* --------------------------------------------------------------------
+ *  Interrupt initialization
+ * -------------------------------------------------------------------- */
+
+/*
+ * The default interrupt priority levels (0 = lowest, 7 = highest).
+ */
+static unsigned int at91sam9g45_default_irq_priority[NR_AIC_IRQS] __initdata = {
+	7,	/* Advanced Interrupt Controller (FIQ) */
+	7,	/* System Peripherals */
+	1,	/* Parallel IO Controller A */
+	1,	/* Parallel IO Controller B */
+	1,	/* Parallel IO Controller C */
+	1,	/* Parallel IO Controller D and E */
+	0,
+	5,	/* USART 0 */
+	5,	/* USART 1 */
+	5,	/* USART 2 */
+	5,	/* USART 3 */
+	0,	/* Multimedia Card Interface 0 */
+	6,	/* Two-Wire Interface 0 */
+	6,	/* Two-Wire Interface 1 */
+	5,	/* Serial Peripheral Interface 0 */
+	5,	/* Serial Peripheral Interface 1 */
+	4,	/* Serial Synchronous Controller 0 */
+	4,	/* Serial Synchronous Controller 1 */
+	0,	/* Timer Counter 0, 1, 2, 3, 4 and 5 */
+	0,	/* Pulse Width Modulation Controller */
+	0,	/* Touch Screen Controller */
+	0,	/* DMA Controller */
+	2,	/* USB Host High Speed port */
+	3,	/* LDC Controller */
+	5,	/* AC97 Controller */
+	3,	/* Ethernet */
+	0,	/* Image Sensor Interface */
+	2,	/* USB Device High speed port */
+	0,
+	0,	/* Multimedia Card Interface 1 */
+	0,
+	0,	/* Advanced Interrupt Controller (IRQ0) */
+};
+
+void __init at91sam9g45_init_interrupts(unsigned int priority[NR_AIC_IRQS])
+{
+	if (!priority)
+		priority = at91sam9g45_default_irq_priority;
+
+	/* Initialize the AIC interrupt controller */
+	at91_aic_init(priority);
+
+	/* Enable GPIO interrupts */
+	at91_gpio_irq_setup();
+}
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
new file mode 100644
index 00000000000..d746e8621bc
--- /dev/null
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -0,0 +1,1230 @@
+/*
+ *  On-Chip devices setup code for the AT91SAM9G45 family
+ *
+ *  Copyright (C) 2009 Atmel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/i2c-gpio.h>
+
+#include <linux/fb.h>
+#include <video/atmel_lcdc.h>
+
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91sam9g45.h>
+#include <mach/at91sam9g45_matrix.h>
+#include <mach/at91sam9_smc.h>
+
+#include "generic.h"
+
+
+/* --------------------------------------------------------------------
+ *  USB Host (OHCI)
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static u64 ohci_dmamask = DMA_BIT_MASK(32);
+static struct at91_usbh_data usbh_ohci_data;
+
+static struct resource usbh_ohci_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_OHCI_BASE,
+		.end	= AT91SAM9G45_OHCI_BASE + SZ_1M - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_ID_UHPHS,
+		.end	= AT91SAM9G45_ID_UHPHS,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91_usbh_ohci_device = {
+	.name		= "at91_ohci",
+	.id		= -1,
+	.dev		= {
+				.dma_mask		= &ohci_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+				.platform_data		= &usbh_ohci_data,
+	},
+	.resource	= usbh_ohci_resources,
+	.num_resources	= ARRAY_SIZE(usbh_ohci_resources),
+};
+
+void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data)
+{
+	int i;
+
+	if (!data)
+		return;
+
+	/* Enable VBus control for UHP ports */
+	for (i = 0; i < data->ports; i++) {
+		if (data->vbus_pin[i])
+			at91_set_gpio_output(data->vbus_pin[i], 0);
+	}
+
+	usbh_ohci_data = *data;
+	platform_device_register(&at91_usbh_ohci_device);
+}
+#else
+void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  USB HS Device (Gadget)
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_USB_GADGET_ATMEL_USBA) || defined(CONFIG_USB_GADGET_ATMEL_USBA_MODULE)
+static struct resource usba_udc_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_UDPHS_FIFO,
+		.end	= AT91SAM9G45_UDPHS_FIFO + SZ_512K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_BASE_UDPHS,
+		.end	= AT91SAM9G45_BASE_UDPHS + SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2] = {
+		.start	= AT91SAM9G45_ID_UDPHS,
+		.end	= AT91SAM9G45_ID_UDPHS,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+#define EP(nam, idx, maxpkt, maxbk, dma, isoc)			\
+	[idx] = {						\
+		.name		= nam,				\
+		.index		= idx,				\
+		.fifo_size	= maxpkt,			\
+		.nr_banks	= maxbk,			\
+		.can_dma	= dma,				\
+		.can_isoc	= isoc,				\
+	}
+
+static struct usba_ep_data usba_udc_ep[] __initdata = {
+	EP("ep0", 0, 64, 1, 0, 0),
+	EP("ep1", 1, 1024, 2, 1, 1),
+	EP("ep2", 2, 1024, 2, 1, 1),
+	EP("ep3", 3, 1024, 3, 1, 0),
+	EP("ep4", 4, 1024, 3, 1, 0),
+	EP("ep5", 5, 1024, 3, 1, 1),
+	EP("ep6", 6, 1024, 3, 1, 1),
+};
+
+#undef EP
+
+/*
+ * pdata doesn't have room for any endpoints, so we need to
+ * append room for the ones we need right after it.
+ */
+static struct {
+	struct usba_platform_data pdata;
+	struct usba_ep_data ep[7];
+} usba_udc_data;
+
+static struct platform_device at91_usba_udc_device = {
+	.name		= "atmel_usba_udc",
+	.id		= -1,
+	.dev		= {
+				.platform_data	= &usba_udc_data.pdata,
+	},
+	.resource	= usba_udc_resources,
+	.num_resources	= ARRAY_SIZE(usba_udc_resources),
+};
+
+void __init at91_add_device_usba(struct usba_platform_data *data)
+{
+	usba_udc_data.pdata.vbus_pin = -EINVAL;
+	usba_udc_data.pdata.num_ep = ARRAY_SIZE(usba_udc_ep);
+	memcpy(usba_udc_data.ep, usba_udc_ep, sizeof(usba_udc_ep));;
+
+	if (data && data->vbus_pin > 0) {
+		at91_set_gpio_input(data->vbus_pin, 0);
+		at91_set_deglitch(data->vbus_pin, 1);
+		usba_udc_data.pdata.vbus_pin = data->vbus_pin;
+	}
+
+	/* Pullup pin is handled internally by USB device peripheral */
+
+	/* Clocks */
+	at91_clock_associate("utmi_clk", &at91_usba_udc_device.dev, "hclk");
+	at91_clock_associate("udphs_clk", &at91_usba_udc_device.dev, "pclk");
+
+	platform_device_register(&at91_usba_udc_device);
+}
+#else
+void __init at91_add_device_usba(struct usba_platform_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  Ethernet
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
+static u64 eth_dmamask = DMA_BIT_MASK(32);
+static struct at91_eth_data eth_data;
+
+static struct resource eth_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_BASE_EMAC,
+		.end	= AT91SAM9G45_BASE_EMAC + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_ID_EMAC,
+		.end	= AT91SAM9G45_ID_EMAC,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9g45_eth_device = {
+	.name		= "macb",
+	.id		= -1,
+	.dev		= {
+				.dma_mask		= &eth_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+				.platform_data		= &eth_data,
+	},
+	.resource	= eth_resources,
+	.num_resources	= ARRAY_SIZE(eth_resources),
+};
+
+void __init at91_add_device_eth(struct at91_eth_data *data)
+{
+	if (!data)
+		return;
+
+	if (data->phy_irq_pin) {
+		at91_set_gpio_input(data->phy_irq_pin, 0);
+		at91_set_deglitch(data->phy_irq_pin, 1);
+	}
+
+	/* Pins used for MII and RMII */
+	at91_set_A_periph(AT91_PIN_PA17, 0);	/* ETXCK_EREFCK */
+	at91_set_A_periph(AT91_PIN_PA15, 0);	/* ERXDV */
+	at91_set_A_periph(AT91_PIN_PA12, 0);	/* ERX0 */
+	at91_set_A_periph(AT91_PIN_PA13, 0);	/* ERX1 */
+	at91_set_A_periph(AT91_PIN_PA16, 0);	/* ERXER */
+	at91_set_A_periph(AT91_PIN_PA14, 0);	/* ETXEN */
+	at91_set_A_periph(AT91_PIN_PA10, 0);	/* ETX0 */
+	at91_set_A_periph(AT91_PIN_PA11, 0);	/* ETX1 */
+	at91_set_A_periph(AT91_PIN_PA19, 0);	/* EMDIO */
+	at91_set_A_periph(AT91_PIN_PA18, 0);	/* EMDC */
+
+	if (!data->is_rmii) {
+		at91_set_B_periph(AT91_PIN_PA29, 0);	/* ECRS */
+		at91_set_B_periph(AT91_PIN_PA30, 0);	/* ECOL */
+		at91_set_B_periph(AT91_PIN_PA8,  0);	/* ERX2 */
+		at91_set_B_periph(AT91_PIN_PA9,  0);	/* ERX3 */
+		at91_set_B_periph(AT91_PIN_PA28, 0);	/* ERXCK */
+		at91_set_B_periph(AT91_PIN_PA6,  0);	/* ETX2 */
+		at91_set_B_periph(AT91_PIN_PA7,  0);	/* ETX3 */
+		at91_set_B_periph(AT91_PIN_PA27, 0);	/* ETXER */
+	}
+
+	eth_data = *data;
+	platform_device_register(&at91sam9g45_eth_device);
+}
+#else
+void __init at91_add_device_eth(struct at91_eth_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  NAND / SmartMedia
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
+static struct atmel_nand_data nand_data;
+
+#define NAND_BASE	AT91_CHIPSELECT_3
+
+static struct resource nand_resources[] = {
+	[0] = {
+		.start	= NAND_BASE,
+		.end	= NAND_BASE + SZ_256M - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91_BASE_SYS + AT91_ECC,
+		.end	= AT91_BASE_SYS + AT91_ECC + SZ_512 - 1,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device at91sam9g45_nand_device = {
+	.name		= "atmel_nand",
+	.id		= -1,
+	.dev		= {
+				.platform_data	= &nand_data,
+	},
+	.resource	= nand_resources,
+	.num_resources	= ARRAY_SIZE(nand_resources),
+};
+
+void __init at91_add_device_nand(struct atmel_nand_data *data)
+{
+	unsigned long csa;
+
+	if (!data)
+		return;
+
+	csa = at91_sys_read(AT91_MATRIX_EBICSA);
+	at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA);
+
+	/* enable pin */
+	if (data->enable_pin)
+		at91_set_gpio_output(data->enable_pin, 1);
+
+	/* ready/busy pin */
+	if (data->rdy_pin)
+		at91_set_gpio_input(data->rdy_pin, 1);
+
+	/* card detect pin */
+	if (data->det_pin)
+		at91_set_gpio_input(data->det_pin, 1);
+
+	nand_data = *data;
+	platform_device_register(&at91sam9g45_nand_device);
+}
+#else
+void __init at91_add_device_nand(struct atmel_nand_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  TWI (i2c)
+ * -------------------------------------------------------------------- */
+
+/*
+ * Prefer the GPIO code since the TWI controller isn't robust
+ * (gets overruns and underruns under load) and can only issue
+ * repeated STARTs in one scenario (the driver doesn't yet handle them).
+ */
+#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+static struct i2c_gpio_platform_data pdata_i2c0 = {
+	.sda_pin		= AT91_PIN_PA20,
+	.sda_is_open_drain	= 1,
+	.scl_pin		= AT91_PIN_PA21,
+	.scl_is_open_drain	= 1,
+	.udelay			= 2,		/* ~100 kHz */
+};
+
+static struct platform_device at91sam9g45_twi0_device = {
+	.name			= "i2c-gpio",
+	.id			= 0,
+	.dev.platform_data	= &pdata_i2c0,
+};
+
+static struct i2c_gpio_platform_data pdata_i2c1 = {
+	.sda_pin		= AT91_PIN_PB10,
+	.sda_is_open_drain	= 1,
+	.scl_pin		= AT91_PIN_PB11,
+	.scl_is_open_drain	= 1,
+	.udelay			= 2,		/* ~100 kHz */
+};
+
+static struct platform_device at91sam9g45_twi1_device = {
+	.name			= "i2c-gpio",
+	.id			= 1,
+	.dev.platform_data	= &pdata_i2c1,
+};
+
+void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices)
+{
+	i2c_register_board_info(i2c_id, devices, nr_devices);
+
+	if (i2c_id == 0) {
+		at91_set_GPIO_periph(AT91_PIN_PA20, 1);		/* TWD (SDA) */
+		at91_set_multi_drive(AT91_PIN_PA20, 1);
+
+		at91_set_GPIO_periph(AT91_PIN_PA21, 1);		/* TWCK (SCL) */
+		at91_set_multi_drive(AT91_PIN_PA21, 1);
+
+		platform_device_register(&at91sam9g45_twi0_device);
+	} else {
+		at91_set_GPIO_periph(AT91_PIN_PB10, 1);		/* TWD (SDA) */
+		at91_set_multi_drive(AT91_PIN_PB10, 1);
+
+		at91_set_GPIO_periph(AT91_PIN_PB11, 1);		/* TWCK (SCL) */
+		at91_set_multi_drive(AT91_PIN_PB11, 1);
+
+		platform_device_register(&at91sam9g45_twi1_device);
+	}
+}
+
+#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
+static struct resource twi0_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_BASE_TWI0,
+		.end	= AT91SAM9G45_BASE_TWI0 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_ID_TWI0,
+		.end	= AT91SAM9G45_ID_TWI0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9g45_twi0_device = {
+	.name		= "at91_i2c",
+	.id		= 0,
+	.resource	= twi0_resources,
+	.num_resources	= ARRAY_SIZE(twi0_resources),
+};
+
+static struct resource twi1_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_BASE_TWI1,
+		.end	= AT91SAM9G45_BASE_TWI1 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_ID_TWI1,
+		.end	= AT91SAM9G45_ID_TWI1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9g45_twi1_device = {
+	.name		= "at91_i2c",
+	.id		= 1,
+	.resource	= twi1_resources,
+	.num_resources	= ARRAY_SIZE(twi1_resources),
+};
+
+void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices)
+{
+	i2c_register_board_info(i2c_id, devices, nr_devices);
+
+	/* pins used for TWI interface */
+	if (i2c_id == 0) {
+		at91_set_A_periph(AT91_PIN_PA20, 0);		/* TWD */
+		at91_set_multi_drive(AT91_PIN_PA20, 1);
+
+		at91_set_A_periph(AT91_PIN_PA21, 0);		/* TWCK */
+		at91_set_multi_drive(AT91_PIN_PA21, 1);
+
+		platform_device_register(&at91sam9g45_twi0_device);
+	} else {
+		at91_set_A_periph(AT91_PIN_PB10, 0);		/* TWD */
+		at91_set_multi_drive(AT91_PIN_PB10, 1);
+
+		at91_set_A_periph(AT91_PIN_PB11, 0);		/* TWCK */
+		at91_set_multi_drive(AT91_PIN_PB11, 1);
+
+		platform_device_register(&at91sam9g45_twi1_device);
+	}
+}
+#else
+void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  SPI
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
+static u64 spi_dmamask = DMA_BIT_MASK(32);
+
+static struct resource spi0_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_BASE_SPI0,
+		.end	= AT91SAM9G45_BASE_SPI0 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_ID_SPI0,
+		.end	= AT91SAM9G45_ID_SPI0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9g45_spi0_device = {
+	.name		= "atmel_spi",
+	.id		= 0,
+	.dev		= {
+				.dma_mask		= &spi_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.resource	= spi0_resources,
+	.num_resources	= ARRAY_SIZE(spi0_resources),
+};
+
+static const unsigned spi0_standard_cs[4] = { AT91_PIN_PB3, AT91_PIN_PB18, AT91_PIN_PB19, AT91_PIN_PD27 };
+
+static struct resource spi1_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_BASE_SPI1,
+		.end	= AT91SAM9G45_BASE_SPI1 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_ID_SPI1,
+		.end	= AT91SAM9G45_ID_SPI1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9g45_spi1_device = {
+	.name		= "atmel_spi",
+	.id		= 1,
+	.dev		= {
+				.dma_mask		= &spi_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.resource	= spi1_resources,
+	.num_resources	= ARRAY_SIZE(spi1_resources),
+};
+
+static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB17, AT91_PIN_PD28, AT91_PIN_PD18, AT91_PIN_PD19 };
+
+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
+{
+	int i;
+	unsigned long cs_pin;
+	short enable_spi0 = 0;
+	short enable_spi1 = 0;
+
+	/* Choose SPI chip-selects */
+	for (i = 0; i < nr_devices; i++) {
+		if (devices[i].controller_data)
+			cs_pin = (unsigned long) devices[i].controller_data;
+		else if (devices[i].bus_num == 0)
+			cs_pin = spi0_standard_cs[devices[i].chip_select];
+		else
+			cs_pin = spi1_standard_cs[devices[i].chip_select];
+
+		if (devices[i].bus_num == 0)
+			enable_spi0 = 1;
+		else
+			enable_spi1 = 1;
+
+		/* enable chip-select pin */
+		at91_set_gpio_output(cs_pin, 1);
+
+		/* pass chip-select pin to driver */
+		devices[i].controller_data = (void *) cs_pin;
+	}
+
+	spi_register_board_info(devices, nr_devices);
+
+	/* Configure SPI bus(es) */
+	if (enable_spi0) {
+		at91_set_A_periph(AT91_PIN_PB0, 0);	/* SPI0_MISO */
+		at91_set_A_periph(AT91_PIN_PB1, 0);	/* SPI0_MOSI */
+		at91_set_A_periph(AT91_PIN_PB2, 0);	/* SPI0_SPCK */
+
+		at91_clock_associate("spi0_clk", &at91sam9g45_spi0_device.dev, "spi_clk");
+		platform_device_register(&at91sam9g45_spi0_device);
+	}
+	if (enable_spi1) {
+		at91_set_A_periph(AT91_PIN_PB14, 0);	/* SPI1_MISO */
+		at91_set_A_periph(AT91_PIN_PB15, 0);	/* SPI1_MOSI */
+		at91_set_A_periph(AT91_PIN_PB16, 0);	/* SPI1_SPCK */
+
+		at91_clock_associate("spi1_clk", &at91sam9g45_spi1_device.dev, "spi_clk");
+		platform_device_register(&at91sam9g45_spi1_device);
+	}
+}
+#else
+void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  LCD Controller
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
+static u64 lcdc_dmamask = DMA_BIT_MASK(32);
+static struct atmel_lcdfb_info lcdc_data;
+
+static struct resource lcdc_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_LCDC_BASE,
+		.end	= AT91SAM9G45_LCDC_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_ID_LCDC,
+		.end	= AT91SAM9G45_ID_LCDC,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91_lcdc_device = {
+	.name		= "atmel_lcdfb",
+	.id		= 0,
+	.dev		= {
+				.dma_mask		= &lcdc_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+				.platform_data		= &lcdc_data,
+	},
+	.resource	= lcdc_resources,
+	.num_resources	= ARRAY_SIZE(lcdc_resources),
+};
+
+void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
+{
+	if (!data)
+		return;
+
+	at91_set_A_periph(AT91_PIN_PE0, 0);	/* LCDDPWR */
+
+	at91_set_A_periph(AT91_PIN_PE2, 0);	/* LCDCC */
+	at91_set_A_periph(AT91_PIN_PE3, 0);	/* LCDVSYNC */
+	at91_set_A_periph(AT91_PIN_PE4, 0);	/* LCDHSYNC */
+	at91_set_A_periph(AT91_PIN_PE5, 0);	/* LCDDOTCK */
+	at91_set_A_periph(AT91_PIN_PE6, 0);	/* LCDDEN */
+	at91_set_A_periph(AT91_PIN_PE7, 0);	/* LCDD0 */
+	at91_set_A_periph(AT91_PIN_PE8, 0);	/* LCDD1 */
+	at91_set_A_periph(AT91_PIN_PE9, 0);	/* LCDD2 */
+	at91_set_A_periph(AT91_PIN_PE10, 0);	/* LCDD3 */
+	at91_set_A_periph(AT91_PIN_PE11, 0);	/* LCDD4 */
+	at91_set_A_periph(AT91_PIN_PE12, 0);	/* LCDD5 */
+	at91_set_A_periph(AT91_PIN_PE13, 0);	/* LCDD6 */
+	at91_set_A_periph(AT91_PIN_PE14, 0);	/* LCDD7 */
+	at91_set_A_periph(AT91_PIN_PE15, 0);	/* LCDD8 */
+	at91_set_A_periph(AT91_PIN_PE16, 0);	/* LCDD9 */
+	at91_set_A_periph(AT91_PIN_PE17, 0);	/* LCDD10 */
+	at91_set_A_periph(AT91_PIN_PE18, 0);	/* LCDD11 */
+	at91_set_A_periph(AT91_PIN_PE19, 0);	/* LCDD12 */
+	at91_set_A_periph(AT91_PIN_PE20, 0);	/* LCDD13 */
+	at91_set_A_periph(AT91_PIN_PE21, 0);	/* LCDD14 */
+	at91_set_A_periph(AT91_PIN_PE22, 0);	/* LCDD15 */
+	at91_set_A_periph(AT91_PIN_PE23, 0);	/* LCDD16 */
+	at91_set_A_periph(AT91_PIN_PE24, 0);	/* LCDD17 */
+	at91_set_A_periph(AT91_PIN_PE25, 0);	/* LCDD18 */
+	at91_set_A_periph(AT91_PIN_PE26, 0);	/* LCDD19 */
+	at91_set_A_periph(AT91_PIN_PE27, 0);	/* LCDD20 */
+	at91_set_A_periph(AT91_PIN_PE28, 0);	/* LCDD21 */
+	at91_set_A_periph(AT91_PIN_PE29, 0);	/* LCDD22 */
+	at91_set_A_periph(AT91_PIN_PE30, 0);	/* LCDD23 */
+
+	lcdc_data = *data;
+	platform_device_register(&at91_lcdc_device);
+}
+#else
+void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  Timer/Counter block
+ * -------------------------------------------------------------------- */
+
+#ifdef CONFIG_ATMEL_TCLIB
+static struct resource tcb0_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_BASE_TCB0,
+		.end	= AT91SAM9G45_BASE_TCB0 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_ID_TCB,
+		.end	= AT91SAM9G45_ID_TCB,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9g45_tcb0_device = {
+	.name		= "atmel_tcb",
+	.id		= 0,
+	.resource	= tcb0_resources,
+	.num_resources	= ARRAY_SIZE(tcb0_resources),
+};
+
+/* TCB1 begins with TC3 */
+static struct resource tcb1_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_BASE_TCB1,
+		.end	= AT91SAM9G45_BASE_TCB1 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_ID_TCB,
+		.end	= AT91SAM9G45_ID_TCB,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9g45_tcb1_device = {
+	.name		= "atmel_tcb",
+	.id		= 1,
+	.resource	= tcb1_resources,
+	.num_resources	= ARRAY_SIZE(tcb1_resources),
+};
+
+static void __init at91_add_device_tc(void)
+{
+	/* this chip has one clock and irq for all six TC channels */
+	at91_clock_associate("tcb_clk", &at91sam9g45_tcb0_device.dev, "t0_clk");
+	platform_device_register(&at91sam9g45_tcb0_device);
+	at91_clock_associate("tcb_clk", &at91sam9g45_tcb1_device.dev, "t0_clk");
+	platform_device_register(&at91sam9g45_tcb1_device);
+}
+#else
+static void __init at91_add_device_tc(void) { }
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  RTC
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_RTC_DRV_AT91RM9200) || defined(CONFIG_RTC_DRV_AT91RM9200_MODULE)
+static struct platform_device at91sam9g45_rtc_device = {
+	.name		= "at91_rtc",
+	.id		= -1,
+	.num_resources	= 0,
+};
+
+static void __init at91_add_device_rtc(void)
+{
+	platform_device_register(&at91sam9g45_rtc_device);
+}
+#else
+static void __init at91_add_device_rtc(void) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  RTT
+ * -------------------------------------------------------------------- */
+
+static struct resource rtt_resources[] = {
+	{
+		.start	= AT91_BASE_SYS + AT91_RTT,
+		.end	= AT91_BASE_SYS + AT91_RTT + SZ_16 - 1,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device at91sam9g45_rtt_device = {
+	.name		= "at91_rtt",
+	.id		= 0,
+	.resource	= rtt_resources,
+	.num_resources	= ARRAY_SIZE(rtt_resources),
+};
+
+static void __init at91_add_device_rtt(void)
+{
+	platform_device_register(&at91sam9g45_rtt_device);
+}
+
+
+/* --------------------------------------------------------------------
+ *  Watchdog
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
+static struct platform_device at91sam9g45_wdt_device = {
+	.name		= "at91_wdt",
+	.id		= -1,
+	.num_resources	= 0,
+};
+
+static void __init at91_add_device_watchdog(void)
+{
+	platform_device_register(&at91sam9g45_wdt_device);
+}
+#else
+static void __init at91_add_device_watchdog(void) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  PWM
+ * --------------------------------------------------------------------*/
+
+#if defined(CONFIG_ATMEL_PWM) || defined(CONFIG_ATMEL_PWM_MODULE)
+static u32 pwm_mask;
+
+static struct resource pwm_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_BASE_PWMC,
+		.end	= AT91SAM9G45_BASE_PWMC + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_ID_PWMC,
+		.end	= AT91SAM9G45_ID_PWMC,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9g45_pwm0_device = {
+	.name	= "atmel_pwm",
+	.id	= -1,
+	.dev	= {
+		.platform_data		= &pwm_mask,
+	},
+	.resource	= pwm_resources,
+	.num_resources	= ARRAY_SIZE(pwm_resources),
+};
+
+void __init at91_add_device_pwm(u32 mask)
+{
+	if (mask & (1 << AT91_PWM0))
+		at91_set_B_periph(AT91_PIN_PD24, 1);	/* enable PWM0 */
+
+	if (mask & (1 << AT91_PWM1))
+		at91_set_B_periph(AT91_PIN_PD31, 1);	/* enable PWM1 */
+
+	if (mask & (1 << AT91_PWM2))
+		at91_set_B_periph(AT91_PIN_PD26, 1);	/* enable PWM2 */
+
+	if (mask & (1 << AT91_PWM3))
+		at91_set_B_periph(AT91_PIN_PD0, 1);	/* enable PWM3 */
+
+	pwm_mask = mask;
+
+	platform_device_register(&at91sam9g45_pwm0_device);
+}
+#else
+void __init at91_add_device_pwm(u32 mask) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  SSC -- Synchronous Serial Controller
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
+static u64 ssc0_dmamask = DMA_BIT_MASK(32);
+
+static struct resource ssc0_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_BASE_SSC0,
+		.end	= AT91SAM9G45_BASE_SSC0 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_ID_SSC0,
+		.end	= AT91SAM9G45_ID_SSC0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9g45_ssc0_device = {
+	.name	= "ssc",
+	.id	= 0,
+	.dev	= {
+		.dma_mask		= &ssc0_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.resource	= ssc0_resources,
+	.num_resources	= ARRAY_SIZE(ssc0_resources),
+};
+
+static inline void configure_ssc0_pins(unsigned pins)
+{
+	if (pins & ATMEL_SSC_TF)
+		at91_set_A_periph(AT91_PIN_PD1, 1);
+	if (pins & ATMEL_SSC_TK)
+		at91_set_A_periph(AT91_PIN_PD0, 1);
+	if (pins & ATMEL_SSC_TD)
+		at91_set_A_periph(AT91_PIN_PD2, 1);
+	if (pins & ATMEL_SSC_RD)
+		at91_set_A_periph(AT91_PIN_PD3, 1);
+	if (pins & ATMEL_SSC_RK)
+		at91_set_A_periph(AT91_PIN_PD4, 1);
+	if (pins & ATMEL_SSC_RF)
+		at91_set_A_periph(AT91_PIN_PD5, 1);
+}
+
+static u64 ssc1_dmamask = DMA_BIT_MASK(32);
+
+static struct resource ssc1_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_BASE_SSC1,
+		.end	= AT91SAM9G45_BASE_SSC1 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_ID_SSC1,
+		.end	= AT91SAM9G45_ID_SSC1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9g45_ssc1_device = {
+	.name	= "ssc",
+	.id	= 1,
+	.dev	= {
+		.dma_mask		= &ssc1_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.resource	= ssc1_resources,
+	.num_resources	= ARRAY_SIZE(ssc1_resources),
+};
+
+static inline void configure_ssc1_pins(unsigned pins)
+{
+	if (pins & ATMEL_SSC_TF)
+		at91_set_A_periph(AT91_PIN_PD14, 1);
+	if (pins & ATMEL_SSC_TK)
+		at91_set_A_periph(AT91_PIN_PD12, 1);
+	if (pins & ATMEL_SSC_TD)
+		at91_set_A_periph(AT91_PIN_PD10, 1);
+	if (pins & ATMEL_SSC_RD)
+		at91_set_A_periph(AT91_PIN_PD11, 1);
+	if (pins & ATMEL_SSC_RK)
+		at91_set_A_periph(AT91_PIN_PD13, 1);
+	if (pins & ATMEL_SSC_RF)
+		at91_set_A_periph(AT91_PIN_PD15, 1);
+}
+
+/*
+ * SSC controllers are accessed through library code, instead of any
+ * kind of all-singing/all-dancing driver.  For example one could be
+ * used by a particular I2S audio codec's driver, while another one
+ * on the same system might be used by a custom data capture driver.
+ */
+void __init at91_add_device_ssc(unsigned id, unsigned pins)
+{
+	struct platform_device *pdev;
+
+	/*
+	 * NOTE: caller is responsible for passing information matching
+	 * "pins" to whatever will be using each particular controller.
+	 */
+	switch (id) {
+	case AT91SAM9G45_ID_SSC0:
+		pdev = &at91sam9g45_ssc0_device;
+		configure_ssc0_pins(pins);
+		at91_clock_associate("ssc0_clk", &pdev->dev, "pclk");
+		break;
+	case AT91SAM9G45_ID_SSC1:
+		pdev = &at91sam9g45_ssc1_device;
+		configure_ssc1_pins(pins);
+		at91_clock_associate("ssc1_clk", &pdev->dev, "pclk");
+		break;
+	default:
+		return;
+	}
+
+	platform_device_register(pdev);
+}
+
+#else
+void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
+#endif
+
+
+/* --------------------------------------------------------------------
+ *  UART
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SERIAL_ATMEL)
+static struct resource dbgu_resources[] = {
+	[0] = {
+		.start	= AT91_VA_BASE_SYS + AT91_DBGU,
+		.end	= AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91_ID_SYS,
+		.end	= AT91_ID_SYS,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct atmel_uart_data dbgu_data = {
+	.use_dma_tx	= 0,
+	.use_dma_rx	= 0,
+	.regs		= (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
+};
+
+static u64 dbgu_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device at91sam9g45_dbgu_device = {
+	.name		= "atmel_usart",
+	.id		= 0,
+	.dev		= {
+				.dma_mask		= &dbgu_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+				.platform_data		= &dbgu_data,
+	},
+	.resource	= dbgu_resources,
+	.num_resources	= ARRAY_SIZE(dbgu_resources),
+};
+
+static inline void configure_dbgu_pins(void)
+{
+	at91_set_A_periph(AT91_PIN_PB12, 0);		/* DRXD */
+	at91_set_A_periph(AT91_PIN_PB13, 1);		/* DTXD */
+}
+
+static struct resource uart0_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_BASE_US0,
+		.end	= AT91SAM9G45_BASE_US0 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_ID_US0,
+		.end	= AT91SAM9G45_ID_US0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct atmel_uart_data uart0_data = {
+	.use_dma_tx	= 1,
+	.use_dma_rx	= 1,
+};
+
+static u64 uart0_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device at91sam9g45_uart0_device = {
+	.name		= "atmel_usart",
+	.id		= 1,
+	.dev		= {
+				.dma_mask		= &uart0_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+				.platform_data		= &uart0_data,
+	},
+	.resource	= uart0_resources,
+	.num_resources	= ARRAY_SIZE(uart0_resources),
+};
+
+static inline void configure_usart0_pins(unsigned pins)
+{
+	at91_set_A_periph(AT91_PIN_PB19, 1);		/* TXD0 */
+	at91_set_A_periph(AT91_PIN_PB18, 0);		/* RXD0 */
+
+	if (pins & ATMEL_UART_RTS)
+		at91_set_B_periph(AT91_PIN_PB17, 0);	/* RTS0 */
+	if (pins & ATMEL_UART_CTS)
+		at91_set_B_periph(AT91_PIN_PB15, 0);	/* CTS0 */
+}
+
+static struct resource uart1_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_BASE_US1,
+		.end	= AT91SAM9G45_BASE_US1 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_ID_US1,
+		.end	= AT91SAM9G45_ID_US1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct atmel_uart_data uart1_data = {
+	.use_dma_tx	= 1,
+	.use_dma_rx	= 1,
+};
+
+static u64 uart1_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device at91sam9g45_uart1_device = {
+	.name		= "atmel_usart",
+	.id		= 2,
+	.dev		= {
+				.dma_mask		= &uart1_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+				.platform_data		= &uart1_data,
+	},
+	.resource	= uart1_resources,
+	.num_resources	= ARRAY_SIZE(uart1_resources),
+};
+
+static inline void configure_usart1_pins(unsigned pins)
+{
+	at91_set_A_periph(AT91_PIN_PB4, 1);		/* TXD1 */
+	at91_set_A_periph(AT91_PIN_PB5, 0);		/* RXD1 */
+
+	if (pins & ATMEL_UART_RTS)
+		at91_set_A_periph(AT91_PIN_PD16, 0);	/* RTS1 */
+	if (pins & ATMEL_UART_CTS)
+		at91_set_A_periph(AT91_PIN_PD17, 0);	/* CTS1 */
+}
+
+static struct resource uart2_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_BASE_US2,
+		.end	= AT91SAM9G45_BASE_US2 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_ID_US2,
+		.end	= AT91SAM9G45_ID_US2,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct atmel_uart_data uart2_data = {
+	.use_dma_tx	= 1,
+	.use_dma_rx	= 1,
+};
+
+static u64 uart2_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device at91sam9g45_uart2_device = {
+	.name		= "atmel_usart",
+	.id		= 3,
+	.dev		= {
+				.dma_mask		= &uart2_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+				.platform_data		= &uart2_data,
+	},
+	.resource	= uart2_resources,
+	.num_resources	= ARRAY_SIZE(uart2_resources),
+};
+
+static inline void configure_usart2_pins(unsigned pins)
+{
+	at91_set_A_periph(AT91_PIN_PB6, 1);		/* TXD2 */
+	at91_set_A_periph(AT91_PIN_PB7, 0);		/* RXD2 */
+
+	if (pins & ATMEL_UART_RTS)
+		at91_set_B_periph(AT91_PIN_PC9, 0);	/* RTS2 */
+	if (pins & ATMEL_UART_CTS)
+		at91_set_B_periph(AT91_PIN_PC11, 0);	/* CTS2 */
+}
+
+static struct resource uart3_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_BASE_US3,
+		.end	= AT91SAM9G45_BASE_US3 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_ID_US3,
+		.end	= AT91SAM9G45_ID_US3,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct atmel_uart_data uart3_data = {
+	.use_dma_tx	= 1,
+	.use_dma_rx	= 1,
+};
+
+static u64 uart3_dmamask = DMA_BIT_MASK(32);
+
+static struct platform_device at91sam9g45_uart3_device = {
+	.name		= "atmel_usart",
+	.id		= 4,
+	.dev		= {
+				.dma_mask		= &uart3_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+				.platform_data		= &uart3_data,
+	},
+	.resource	= uart3_resources,
+	.num_resources	= ARRAY_SIZE(uart3_resources),
+};
+
+static inline void configure_usart3_pins(unsigned pins)
+{
+	at91_set_A_periph(AT91_PIN_PB8, 1);		/* TXD3 */
+	at91_set_A_periph(AT91_PIN_PB9, 0);		/* RXD3 */
+
+	if (pins & ATMEL_UART_RTS)
+		at91_set_B_periph(AT91_PIN_PA23, 0);	/* RTS3 */
+	if (pins & ATMEL_UART_CTS)
+		at91_set_B_periph(AT91_PIN_PA24, 0);	/* CTS3 */
+}
+
+static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
+struct platform_device *atmel_default_console_device;	/* the serial console device */
+
+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
+{
+	struct platform_device *pdev;
+
+	switch (id) {
+		case 0:		/* DBGU */
+			pdev = &at91sam9g45_dbgu_device;
+			configure_dbgu_pins();
+			at91_clock_associate("mck", &pdev->dev, "usart");
+			break;
+		case AT91SAM9G45_ID_US0:
+			pdev = &at91sam9g45_uart0_device;
+			configure_usart0_pins(pins);
+			at91_clock_associate("usart0_clk", &pdev->dev, "usart");
+			break;
+		case AT91SAM9G45_ID_US1:
+			pdev = &at91sam9g45_uart1_device;
+			configure_usart1_pins(pins);
+			at91_clock_associate("usart1_clk", &pdev->dev, "usart");
+			break;
+		case AT91SAM9G45_ID_US2:
+			pdev = &at91sam9g45_uart2_device;
+			configure_usart2_pins(pins);
+			at91_clock_associate("usart2_clk", &pdev->dev, "usart");
+			break;
+		case AT91SAM9G45_ID_US3:
+			pdev = &at91sam9g45_uart3_device;
+			configure_usart3_pins(pins);
+			at91_clock_associate("usart3_clk", &pdev->dev, "usart");
+			break;
+		default:
+			return;
+	}
+	pdev->id = portnr;		/* update to mapped ID */
+
+	if (portnr < ATMEL_MAX_UART)
+		at91_uarts[portnr] = pdev;
+}
+
+void __init at91_set_serial_console(unsigned portnr)
+{
+	if (portnr < ATMEL_MAX_UART)
+		atmel_default_console_device = at91_uarts[portnr];
+}
+
+void __init at91_add_device_serial(void)
+{
+	int i;
+
+	for (i = 0; i < ATMEL_MAX_UART; i++) {
+		if (at91_uarts[i])
+			platform_device_register(at91_uarts[i]);
+	}
+
+	if (!atmel_default_console_device)
+		printk(KERN_INFO "AT91: No default serial console defined.\n");
+}
+#else
+void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
+void __init at91_set_serial_console(unsigned portnr) {}
+void __init at91_add_device_serial(void) {}
+#endif
+
+
+/* -------------------------------------------------------------------- */
+/*
+ * These devices are always present and don't need any board-specific
+ * setup.
+ */
+static int __init at91_add_standard_devices(void)
+{
+	at91_add_device_rtc();
+	at91_add_device_rtt();
+	at91_add_device_watchdog();
+	at91_add_device_tc();
+	return 0;
+}
+
+arch_initcall(at91_add_standard_devices);
diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
new file mode 100644
index 00000000000..b8558eae522
--- /dev/null
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -0,0 +1,389 @@
+/*
+ *  Board-specific setup code for the AT91SAM9M10G45 Evaluation Kit family
+ *
+ *  Covers: * AT91SAM9G45-EKES  board
+ *          * AT91SAM9M10G45-EK board
+ *
+ *  Copyright (C) 2009 Atmel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/fb.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/leds.h>
+#include <linux/clk.h>
+
+#include <mach/hardware.h>
+#include <video/atmel_lcdc.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91sam9_smc.h>
+#include <mach/at91_shdwc.h>
+
+#include "sam9_smc.h"
+#include "generic.h"
+
+
+static void __init ek_map_io(void)
+{
+	/* Initialize processor: 12.000 MHz crystal */
+	at91sam9g45_initialize(12000000);
+
+	/* DGBU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART0 not connected on the -EK board */
+	/* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
+	at91_register_uart(AT91SAM9G45_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
+
+	/* set serial console to ttyS0 (ie, DBGU) */
+	at91_set_serial_console(0);
+}
+
+static void __init ek_init_irq(void)
+{
+	at91sam9g45_init_interrupts(NULL);
+}
+
+
+/*
+ * USB HS Host port (common to OHCI & EHCI)
+ */
+static struct at91_usbh_data __initdata ek_usbh_hs_data = {
+	.ports		= 2,
+	.vbus_pin	= {AT91_PIN_PD1, AT91_PIN_PD3},
+};
+
+
+/*
+ * USB HS Device port
+ */
+static struct usba_platform_data __initdata ek_usba_udc_data = {
+	.vbus_pin	= AT91_PIN_PB19,
+};
+
+
+/*
+ * SPI devices.
+ */
+static struct spi_board_info ek_spi_devices[] = {
+	{	/* DataFlash chip */
+		.modalias	= "mtd_dataflash",
+		.chip_select	= 0,
+		.max_speed_hz	= 15 * 1000 * 1000,
+		.bus_num	= 0,
+	},
+};
+
+
+/*
+ * MACB Ethernet device
+ */
+static struct at91_eth_data __initdata ek_macb_data = {
+	.phy_irq_pin	= AT91_PIN_PD5,
+	.is_rmii	= 1,
+};
+
+
+/*
+ * NAND flash
+ */
+static struct mtd_partition __initdata ek_nand_partition[] = {
+	{
+		.name	= "Partition 1",
+		.offset	= 0,
+		.size	= SZ_64M,
+	},
+	{
+		.name	= "Partition 2",
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
+{
+	*num_partitions = ARRAY_SIZE(ek_nand_partition);
+	return ek_nand_partition;
+}
+
+/* det_pin is not connected */
+static struct atmel_nand_data __initdata ek_nand_data = {
+	.ale		= 21,
+	.cle		= 22,
+	.rdy_pin	= AT91_PIN_PC8,
+	.enable_pin	= AT91_PIN_PC14,
+	.partition_info	= nand_partitions,
+#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+	.bus_width_16	= 1,
+#else
+	.bus_width_16	= 0,
+#endif
+};
+
+static struct sam9_smc_config __initdata ek_nand_smc_config = {
+	.ncs_read_setup		= 0,
+	.nrd_setup		= 2,
+	.ncs_write_setup	= 0,
+	.nwe_setup		= 2,
+
+	.ncs_read_pulse		= 4,
+	.nrd_pulse		= 4,
+	.ncs_write_pulse	= 4,
+	.nwe_pulse		= 4,
+
+	.read_cycle		= 7,
+	.write_cycle		= 7,
+
+	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
+	.tdf_cycles		= 3,
+};
+
+static void __init ek_add_device_nand(void)
+{
+	/* setup bus-width (8 or 16) */
+	if (ek_nand_data.bus_width_16)
+		ek_nand_smc_config.mode |= AT91_SMC_DBW_16;
+	else
+		ek_nand_smc_config.mode |= AT91_SMC_DBW_8;
+
+	/* configure chip-select 3 (NAND) */
+	sam9_smc_configure(3, &ek_nand_smc_config);
+
+	at91_add_device_nand(&ek_nand_data);
+}
+
+
+/*
+ * LCD Controller
+ */
+#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
+static struct fb_videomode at91_tft_vga_modes[] = {
+	{
+		.name           = "LG",
+		.refresh	= 60,
+		.xres		= 480,		.yres		= 272,
+		.pixclock	= KHZ2PICOS(9000),
+
+		.left_margin	= 1,		.right_margin	= 1,
+		.upper_margin	= 40,		.lower_margin	= 1,
+		.hsync_len	= 45,		.vsync_len	= 1,
+
+		.sync		= 0,
+		.vmode		= FB_VMODE_NONINTERLACED,
+	},
+};
+
+static struct fb_monspecs at91fb_default_monspecs = {
+	.manufacturer	= "LG",
+	.monitor        = "LB043WQ1",
+
+	.modedb		= at91_tft_vga_modes,
+	.modedb_len	= ARRAY_SIZE(at91_tft_vga_modes),
+	.hfmin		= 15000,
+	.hfmax		= 17640,
+	.vfmin		= 57,
+	.vfmax		= 67,
+};
+
+#define AT91SAM9G45_DEFAULT_LCDCON2 	(ATMEL_LCDC_MEMOR_LITTLE \
+					| ATMEL_LCDC_DISTYPE_TFT \
+					| ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
+
+/* Driver datas */
+static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
+	.lcdcon_is_backlight		= true,
+	.default_bpp			= 32,
+	.default_dmacon			= ATMEL_LCDC_DMAEN,
+	.default_lcdcon2		= AT91SAM9G45_DEFAULT_LCDCON2,
+	.default_monspecs		= &at91fb_default_monspecs,
+	.guard_time			= 9,
+	.lcd_wiring_mode		= ATMEL_LCDC_WIRING_RGB,
+};
+
+#else
+static struct atmel_lcdfb_info __initdata ek_lcdc_data;
+#endif
+
+
+/*
+ * GPIO Buttons
+ */
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button ek_buttons[] = {
+	{	/* BP1, "leftclic" */
+		.code		= BTN_LEFT,
+		.gpio		= AT91_PIN_PB6,
+		.active_low	= 1,
+		.desc		= "left_click",
+		.wakeup		= 1,
+	},
+	{	/* BP2, "rightclic" */
+		.code		= BTN_RIGHT,
+		.gpio		= AT91_PIN_PB7,
+		.active_low	= 1,
+		.desc		= "right_click",
+		.wakeup		= 1,
+	},
+		/* BP3, "joystick" */
+	{
+		.code		= KEY_LEFT,
+		.gpio		= AT91_PIN_PB14,
+		.active_low	= 1,
+		.desc		= "Joystick Left",
+	},
+	{
+		.code		= KEY_RIGHT,
+		.gpio		= AT91_PIN_PB15,
+		.active_low	= 1,
+		.desc		= "Joystick Right",
+	},
+	{
+		.code		= KEY_UP,
+		.gpio		= AT91_PIN_PB16,
+		.active_low	= 1,
+		.desc		= "Joystick Up",
+	},
+	{
+		.code		= KEY_DOWN,
+		.gpio		= AT91_PIN_PB17,
+		.active_low	= 1,
+		.desc		= "Joystick Down",
+	},
+	{
+		.code		= KEY_ENTER,
+		.gpio		= AT91_PIN_PB18,
+		.active_low	= 1,
+		.desc		= "Joystick Press",
+	},
+};
+
+static struct gpio_keys_platform_data ek_button_data = {
+	.buttons	= ek_buttons,
+	.nbuttons	= ARRAY_SIZE(ek_buttons),
+};
+
+static struct platform_device ek_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &ek_button_data,
+	}
+};
+
+static void __init ek_add_device_buttons(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(ek_buttons); i++) {
+		at91_set_GPIO_periph(ek_buttons[i].gpio, 1);
+		at91_set_deglitch(ek_buttons[i].gpio, 1);
+	}
+
+	platform_device_register(&ek_button_device);
+}
+#else
+static void __init ek_add_device_buttons(void) {}
+#endif
+
+
+/*
+ * LEDs ... these could all be PWM-driven, for variable brightness
+ */
+static struct gpio_led ek_leds[] = {
+	{	/* "top" led, red, powerled */
+		.name			= "d8",
+		.gpio			= AT91_PIN_PD30,
+		.default_trigger	= "heartbeat",
+	},
+	{	/* "left" led, green, userled2, pwm3 */
+		.name			= "d6",
+		.gpio			= AT91_PIN_PD0,
+		.active_low		= 1,
+		.default_trigger	= "nand-disk",
+	},
+#if !(defined(CONFIG_LEDS_ATMEL_PWM) || defined(CONFIG_LEDS_ATMEL_PWM_MODULE))
+	{	/* "right" led, green, userled1, pwm1 */
+		.name			= "d7",
+		.gpio			= AT91_PIN_PD31,
+		.active_low		= 1,
+		.default_trigger	= "mmc0",
+	},
+#endif
+};
+
+
+/*
+ * PWM Leds
+ */
+static struct gpio_led ek_pwm_led[] = {
+#if defined(CONFIG_LEDS_ATMEL_PWM) || defined(CONFIG_LEDS_ATMEL_PWM_MODULE)
+	{	/* "right" led, green, userled1, pwm1 */
+		.name			= "d7",
+		.gpio			= 1,	/* is PWM channel number */
+		.active_low		= 1,
+		.default_trigger	= "none",
+	},
+#endif
+};
+
+
+
+static void __init ek_board_init(void)
+{
+	/* Serial */
+	at91_add_device_serial();
+	/* USB HS Host */
+	at91_add_device_usbh_ohci(&ek_usbh_hs_data);
+	/* USB HS Device */
+	at91_add_device_usba(&ek_usba_udc_data);
+	/* SPI */
+	at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
+	/* Ethernet */
+	at91_add_device_eth(&ek_macb_data);
+	/* NAND */
+	ek_add_device_nand();
+	/* I2C */
+	at91_add_device_i2c(0, NULL, 0);
+	/* LCD Controller */
+	at91_add_device_lcdc(&ek_lcdc_data);
+	/* Push Buttons */
+	ek_add_device_buttons();
+	/* LEDs */
+	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
+	at91_pwm_leds(ek_pwm_led, ARRAY_SIZE(ek_pwm_led));
+}
+
+MACHINE_START(AT91SAM9G45EKES, "Atmel AT91SAM9G45-EKES")
+	/* Maintainer: Atmel */
+	.phys_io	= AT91_BASE_SYS,
+	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+	.boot_params	= AT91_SDRAM_BASE + 0x100,
+	.timer		= &at91sam926x_timer,
+	.map_io		= ek_map_io,
+	.init_irq	= ek_init_irq,
+	.init_machine	= ek_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
index b5daf7f5e01..88e413b3848 100644
--- a/arch/arm/mach-at91/generic.h
+++ b/arch/arm/mach-at91/generic.h
@@ -14,6 +14,7 @@ extern void __init at91sam9260_initialize(unsigned long main_clock);
 extern void __init at91sam9261_initialize(unsigned long main_clock);
 extern void __init at91sam9263_initialize(unsigned long main_clock);
 extern void __init at91sam9rl_initialize(unsigned long main_clock);
+extern void __init at91sam9g45_initialize(unsigned long main_clock);
 extern void __init at91x40_initialize(unsigned long main_clock);
 extern void __init at91cap9_initialize(unsigned long main_clock);
 
@@ -23,6 +24,7 @@ extern void __init at91sam9260_init_interrupts(unsigned int priority[]);
 extern void __init at91sam9261_init_interrupts(unsigned int priority[]);
 extern void __init at91sam9263_init_interrupts(unsigned int priority[]);
 extern void __init at91sam9rl_init_interrupts(unsigned int priority[]);
+extern void __init at91sam9g45_init_interrupts(unsigned int priority[]);
 extern void __init at91x40_init_interrupts(unsigned int priority[]);
 extern void __init at91cap9_init_interrupts(unsigned int priority[]);
 extern void __init at91_aic_init(unsigned int priority[]);
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index e6afff849b8..74801d275cd 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -80,7 +80,8 @@ struct at91_eth_data {
 };
 extern void __init at91_add_device_eth(struct at91_eth_data *data);
 
-#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91SAM9G20) || defined(CONFIG_ARCH_AT91CAP9)
+#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91SAM9G20) || defined(CONFIG_ARCH_AT91CAP9) \
+	|| defined(CONFIG_ARCH_AT91SAM9G45)
 #define eth_platform_data	at91_eth_data
 #endif
 
@@ -90,6 +91,7 @@ struct at91_usbh_data {
 	u8		vbus_pin[2];	/* port power-control pin */
 };
 extern void __init at91_add_device_usbh(struct at91_usbh_data *data);
+extern void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data);
 
  /* NAND / SmartMedia */
 struct atmel_nand_data {
@@ -105,7 +107,11 @@ struct atmel_nand_data {
 extern void __init at91_add_device_nand(struct atmel_nand_data *data);
 
  /* I2C*/
+#if defined(CONFIG_ARCH_AT91SAM9G45)
+extern void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices);
+#else
 extern void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices);
+#endif
 
  /* SPI */
 extern void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices);
-- 
cgit v1.2.3


From 087975b06b00af9bf888fab6f94ae113c5cd80bd Mon Sep 17 00:00:00 2001
From: Akinobu Mita <akinobu.mita@gmail.com>
Date: Sat, 27 Jun 2009 15:35:15 +0900
Subject: x86: Clean up dump_pagetable()

Use pgtable access helpers for 32-bit version dump_pagetable()
and get rid of __typeof__() operators. This needs to make
pmd_pfn() available for 2-level pgtable.

Also, remove some casts for 64-bit version dump_pagetable().

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
LKML-Reference: <20090627063514.GA2834@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/pgtable.h | 10 ++++-----
 arch/x86/mm/fault.c            | 51 +++++++++++++++++-------------------------
 2 files changed, 26 insertions(+), 35 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index 3cc06e3fceb..af5481e9486 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -134,6 +134,11 @@ static inline unsigned long pte_pfn(pte_t pte)
 	return (pte_val(pte) & PTE_PFN_MASK) >> PAGE_SHIFT;
 }
 
+static inline unsigned long pmd_pfn(pmd_t pmd)
+{
+	return (pmd_val(pmd) & PTE_PFN_MASK) >> PAGE_SHIFT;
+}
+
 #define pte_page(pte)	pfn_to_page(pte_pfn(pte))
 
 static inline int pmd_large(pmd_t pte)
@@ -422,11 +427,6 @@ static inline pmd_t *pmd_offset(pud_t *pud, unsigned long address)
 	return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(address);
 }
 
-static inline unsigned long pmd_pfn(pmd_t pmd)
-{
-	return (pmd_val(pmd) & PTE_PFN_MASK) >> PAGE_SHIFT;
-}
-
 static inline int pud_large(pud_t pud)
 {
 	return (pud_val(pud) & (_PAGE_PSE | _PAGE_PRESENT)) ==
diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index 78a5fff857b..9bf7e52c286 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -285,26 +285,25 @@ check_v8086_mode(struct pt_regs *regs, unsigned long address,
 		tsk->thread.screen_bitmap |= 1 << bit;
 }
 
-static void dump_pagetable(unsigned long address)
+static bool low_pfn(unsigned long pfn)
 {
-	__typeof__(pte_val(__pte(0))) page;
+	return pfn < max_low_pfn;
+}
 
-	page = read_cr3();
-	page = ((__typeof__(page) *) __va(page))[address >> PGDIR_SHIFT];
+static void dump_pagetable(unsigned long address)
+{
+	pgd_t *base = __va(read_cr3());
+	pgd_t *pgd = &base[pgd_index(address)];
+	pmd_t *pmd;
+	pte_t *pte;
 
 #ifdef CONFIG_X86_PAE
-	printk("*pdpt = %016Lx ", page);
-	if ((page >> PAGE_SHIFT) < max_low_pfn
-	    && page & _PAGE_PRESENT) {
-		page &= PAGE_MASK;
-		page = ((__typeof__(page) *) __va(page))[(address >> PMD_SHIFT)
-							& (PTRS_PER_PMD - 1)];
-		printk(KERN_CONT "*pde = %016Lx ", page);
-		page &= ~_PAGE_NX;
-	}
-#else
-	printk("*pde = %08lx ", page);
+	printk("*pdpt = %016Lx ", pgd_val(*pgd));
+	if (!low_pfn(pgd_val(*pgd) >> PAGE_SHIFT) || !pgd_present(*pgd))
+		goto out;
 #endif
+	pmd = pmd_offset(pud_offset(pgd, address), address);
+	printk(KERN_CONT "*pde = %0*Lx ", sizeof(*pmd) * 2, (u64)pmd_val(*pmd));
 
 	/*
 	 * We must not directly access the pte in the highpte
@@ -312,16 +311,12 @@ static void dump_pagetable(unsigned long address)
 	 * And let's rather not kmap-atomic the pte, just in case
 	 * it's allocated already:
 	 */
-	if ((page >> PAGE_SHIFT) < max_low_pfn
-	    && (page & _PAGE_PRESENT)
-	    && !(page & _PAGE_PSE)) {
-
-		page &= PAGE_MASK;
-		page = ((__typeof__(page) *) __va(page))[(address >> PAGE_SHIFT)
-							& (PTRS_PER_PTE - 1)];
-		printk("*pte = %0*Lx ", sizeof(page)*2, (u64)page);
-	}
+	if (!low_pfn(pmd_pfn(*pmd)) || !pmd_present(*pmd) || pmd_large(*pmd))
+		goto out;
 
+	pte = pte_offset_kernel(pmd, address);
+	printk("*pte = %0*Lx ", sizeof(*pte) * 2, (u64)pte_val(*pte));
+out:
 	printk("\n");
 }
 
@@ -449,16 +444,12 @@ static int bad_address(void *p)
 
 static void dump_pagetable(unsigned long address)
 {
-	pgd_t *pgd;
+	pgd_t *base = __va(read_cr3() & PHYSICAL_PAGE_MASK);
+	pgd_t *pgd = base + pgd_index(address);
 	pud_t *pud;
 	pmd_t *pmd;
 	pte_t *pte;
 
-	pgd = (pgd_t *)read_cr3();
-
-	pgd = __va((unsigned long)pgd & PHYSICAL_PAGE_MASK);
-
-	pgd += pgd_index(address);
 	if (bad_address(pgd))
 		goto bad;
 
-- 
cgit v1.2.3


From ce0c0f9eec2f377055e8b23c6fa192202381e022 Mon Sep 17 00:00:00 2001
From: "Figo.zhang" <figo1802@gmail.com>
Date: Sun, 28 Jun 2009 18:07:39 +0800
Subject: x86, pgtable.h: Clean up types

Use "unsigned long" consistently, not "unsigned".

Signed-off-by: Figo.zhang <figo1802@gmail.com>
LKML-Reference: <1246183659.2530.4.camel@myhost>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/pgtable.h | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index af5481e9486..9de8729c1c8 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -356,7 +356,7 @@ static inline unsigned long pmd_page_vaddr(pmd_t pmd)
  * this macro returns the index of the entry in the pmd page which would
  * control the given virtual address
  */
-static inline unsigned pmd_index(unsigned long address)
+static inline unsigned long pmd_index(unsigned long address)
 {
 	return (address >> PMD_SHIFT) & (PTRS_PER_PMD - 1);
 }
@@ -376,7 +376,7 @@ static inline unsigned pmd_index(unsigned long address)
  * this function returns the index of the entry in the pte page which would
  * control the given virtual address
  */
-static inline unsigned pte_index(unsigned long address)
+static inline unsigned long pte_index(unsigned long address)
 {
 	return (address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1);
 }
@@ -462,7 +462,7 @@ static inline unsigned long pgd_page_vaddr(pgd_t pgd)
 #define pgd_page(pgd)		pfn_to_page(pgd_val(pgd) >> PAGE_SHIFT)
 
 /* to find an entry in a page-table-directory. */
-static inline unsigned pud_index(unsigned long address)
+static inline unsigned long pud_index(unsigned long address)
 {
 	return (address >> PUD_SHIFT) & (PTRS_PER_PUD - 1);
 }
-- 
cgit v1.2.3


From 565b0c1f100408ccbcb04ba458a14da454cb271d Mon Sep 17 00:00:00 2001
From: "Figo.zhang" <figo1802@gmail.com>
Date: Mon, 29 Jun 2009 12:02:55 +0800
Subject: x86, highmem_32.c: Clean up comment

Signed-off-by: Figo.zhang <figo1802@gmail.com>
Cc: Andrew Morton <akpm@osdl.org>
LKML-Reference: <1246248175.5759.12.camel@myhost>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/highmem_32.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/mm/highmem_32.c b/arch/x86/mm/highmem_32.c
index 58f621e8191..0c6f43cee25 100644
--- a/arch/x86/mm/highmem_32.c
+++ b/arch/x86/mm/highmem_32.c
@@ -24,7 +24,7 @@ void kunmap(struct page *page)
  * no global lock is needed and because the kmap code must perform a global TLB
  * invalidation when the kmap pool wraps.
  *
- * However when holding an atomic kmap is is not legal to sleep, so atomic
+ * However when holding an atomic kmap it is not legal to sleep, so atomic
  * kmaps are appropriate for short, tight code paths only.
  */
 void *kmap_atomic_prot(struct page *page, enum km_type type, pgprot_t prot)
-- 
cgit v1.2.3


From eab4170865cce9b8898a813b7e8024de857a01da Mon Sep 17 00:00:00 2001
From: Nicolas Ferre <nicolas.ferre@atmel.com>
Date: Fri, 26 Jun 2009 15:37:00 +0100
Subject: [ARM] 5567/1: at91: Support for at91sam9g10: clocks management

From: Hong Xu <hong.xu@atmel.com>

Add the at91sam9g10 support to the AT91 generic clock file. It takes
advantage of the management by functionalities of those PLLs and clocks.

Signed-off-by: Hong Xu <hong.xu@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/clock.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
index 6396680271e..c042dcf4725 100644
--- a/arch/arm/mach-at91/clock.c
+++ b/arch/arm/mach-at91/clock.c
@@ -53,7 +53,7 @@
 #define cpu_has_800M_plla()	(  cpu_is_at91sam9g20() \
 				|| cpu_is_at91sam9g45())
 
-#define cpu_has_300M_plla()	(0)
+#define cpu_has_300M_plla()	(cpu_is_at91sam9g10())
 
 #define cpu_has_pllb()		(!(cpu_is_at91sam9rl() \
 				|| cpu_is_at91sam9g45()))
@@ -626,7 +626,9 @@ static void __init at91_pllb_usbfs_clock_init(unsigned long main_clock)
 		uhpck.pmc_mask = AT91RM9200_PMC_UHP;
 		udpck.pmc_mask = AT91RM9200_PMC_UDP;
 		at91_sys_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP);
-	} else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263() || cpu_is_at91sam9g20()) {
+	} else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() ||
+		   cpu_is_at91sam9263() || cpu_is_at91sam9g20() ||
+		   cpu_is_at91sam9g10()) {
 		uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
 		udpck.pmc_mask = AT91SAM926x_PMC_UDP;
 	} else if (cpu_is_at91cap9()) {
-- 
cgit v1.2.3


From b784b7c03723891876c9053c589150a4062f9455 Mon Sep 17 00:00:00 2001
From: Nicolas Ferre <nicolas.ferre@atmel.com>
Date: Fri, 26 Jun 2009 15:36:59 +0100
Subject: [ARM] 5568/1: at91: Basic support for at91sam9g10: header files

From: Hong Xu <hong.xu@atmel.com>

AT91sam9g10 is an ARM 926ej-s SOC. It is an evolution of the at91sam9261 with a
faster clock speed: 266/133MHz.

Here is the basic header file support for this product.

Signed-off-by: Hong Xu <hong.xu@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/include/mach/at91sam9261.h | 3 +++
 arch/arm/mach-at91/include/mach/cpu.h         | 7 +++++++
 arch/arm/mach-at91/include/mach/hardware.h    | 2 +-
 arch/arm/mach-at91/include/mach/timex.h       | 5 +++++
 4 files changed, 16 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-at91/include/mach/at91sam9261.h b/arch/arm/mach-at91/include/mach/at91sam9261.h
index 3a348ca2077..87de8be1748 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9261.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9261.h
@@ -95,6 +95,9 @@
 #define AT91SAM9261_SRAM_BASE	0x00300000	/* Internal SRAM base address */
 #define AT91SAM9261_SRAM_SIZE	0x00028000	/* Internal SRAM size (160Kb) */
 
+#define AT91SAM9G10_SRAM_BASE	AT91SAM9261_SRAM_BASE	/* Internal SRAM base address */
+#define AT91SAM9G10_SRAM_SIZE	0x00004000	/* Internal SRAM size (16Kb) */
+
 #define AT91SAM9261_ROM_BASE	0x00400000	/* Internal ROM base address */
 #define AT91SAM9261_ROM_SIZE	SZ_32K		/* Internal ROM size (32Kb) */
 
diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h
index b73e7bf097d..34a9502c48b 100644
--- a/arch/arm/mach-at91/include/mach/cpu.h
+++ b/arch/arm/mach-at91/include/mach/cpu.h
@@ -21,6 +21,7 @@
 #define ARCH_ID_AT91SAM9260	0x019803a0
 #define ARCH_ID_AT91SAM9261	0x019703a0
 #define ARCH_ID_AT91SAM9263	0x019607a0
+#define ARCH_ID_AT91SAM9G10	0x819903a0
 #define ARCH_ID_AT91SAM9G20	0x019905a0
 #define ARCH_ID_AT91SAM9RL64	0x019b03a0
 #define ARCH_ID_AT91SAM9G45	0x819b05a0
@@ -97,6 +98,12 @@ static inline unsigned long at91cap9_rev_identify(void)
 #define cpu_is_at91sam9261()	(0)
 #endif
 
+#ifdef CONFIG_ARCH_AT91SAM9G10
+#define cpu_is_at91sam9g10()	(at91_cpu_identify() == ARCH_ID_AT91SAM9G10)
+#else
+#define cpu_is_at91sam9g10()	(0)
+#endif
+
 #ifdef CONFIG_ARCH_AT91SAM9263
 #define cpu_is_at91sam9263()	(at91_cpu_identify() == ARCH_ID_AT91SAM9263)
 #else
diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h
index f0869170fa0..a0df8b022df 100644
--- a/arch/arm/mach-at91/include/mach/hardware.h
+++ b/arch/arm/mach-at91/include/mach/hardware.h
@@ -20,7 +20,7 @@
 #include <mach/at91rm9200.h>
 #elif defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9G20)
 #include <mach/at91sam9260.h>
-#elif defined(CONFIG_ARCH_AT91SAM9261)
+#elif defined(CONFIG_ARCH_AT91SAM9261) || defined(CONFIG_ARCH_AT91SAM9G10)
 #include <mach/at91sam9261.h>
 #elif defined(CONFIG_ARCH_AT91SAM9263)
 #include <mach/at91sam9263.h>
diff --git a/arch/arm/mach-at91/include/mach/timex.h b/arch/arm/mach-at91/include/mach/timex.h
index 38f6c4250c7..31ac2d97f14 100644
--- a/arch/arm/mach-at91/include/mach/timex.h
+++ b/arch/arm/mach-at91/include/mach/timex.h
@@ -42,6 +42,11 @@
 #define AT91SAM9_MASTER_CLOCK	99300000
 #define CLOCK_TICK_RATE		(AT91SAM9_MASTER_CLOCK/16)
 
+#elif defined(CONFIG_ARCH_AT91SAM9G10)
+
+#define AT91SAM9_MASTER_CLOCK	133000000
+#define CLOCK_TICK_RATE		(AT91SAM9_MASTER_CLOCK/16)
+
 #elif defined(CONFIG_ARCH_AT91SAM9263)
 
 #if defined(CONFIG_MACH_USB_A9263)
-- 
cgit v1.2.3


From b319ff80852e823c3a18778c839151784990f80b Mon Sep 17 00:00:00 2001
From: Nicolas Ferre <nicolas.ferre@atmel.com>
Date: Fri, 26 Jun 2009 15:37:01 +0100
Subject: [ARM] 5570/1: at91: Support for at91sam9g10: core chip & board
 support

From: Hong Xu <hong.xu@atmel.com>

Here are the modification to at91sam9261 files dedicated to the support of
at91sam9g10. This direction has been adopted to minimize code duplication.

All at91sam9261 drivers are enabled in _devices and board- files. Modificaton
to peripherals that support at91sam9g10 will be added in future patches.

Signed-off-by: Hong Xu <hong.xu@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/Kconfig           | 25 +++++++++++++++++++++++--
 arch/arm/mach-at91/Makefile          |  2 ++
 arch/arm/mach-at91/at91sam9261.c     | 22 +++++++++++++++++++++-
 arch/arm/mach-at91/board-sam9261ek.c | 14 ++++++++++++++
 arch/arm/mach-at91/pm.c              |  3 ++-
 5 files changed, 62 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 22309ba97fa..8f3e15abdb6 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -23,6 +23,12 @@ config ARCH_AT91SAM9261
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 
+config ARCH_AT91SAM9G10
+	bool "AT91SAM9G10"
+	select CPU_ARM926T
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+
 config ARCH_AT91SAM9263
 	bool "AT91SAM9263"
 	select CPU_ARM926T
@@ -230,6 +236,21 @@ endif
 
 # ----------------------------------------------------------
 
+if ARCH_AT91SAM9G10
+
+comment "AT91SAM9G10 Board Type"
+
+config MACH_AT91SAM9G10EK
+	bool "Atmel AT91SAM9G10-EK Evaluation Kit"
+	depends on ARCH_AT91SAM9G10
+	help
+	  Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit.
+	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588>
+
+endif
+
+# ----------------------------------------------------------
+
 if ARCH_AT91SAM9263
 
 comment "AT91SAM9263 Board Type"
@@ -337,13 +358,13 @@ comment "AT91 Board Options"
 
 config MTD_AT91_DATAFLASH_CARD
 	bool "Enable DataFlash Card support"
-	depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_ECBAT91 || MACH_SAM9_L9260 || MACH_AT91CAP9ADK || MACH_NEOCORE926)
+	depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_ECBAT91 || MACH_SAM9_L9260 || MACH_AT91CAP9ADK || MACH_NEOCORE926)
 	help
 	  Enable support for the DataFlash card.
 
 config MTD_NAND_ATMEL_BUSWIDTH_16
 	bool "Enable 16-bit data bus interface to NAND flash"
-	depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91SAM9G45EKES || MACH_AT91CAP9ADK)
+	depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91SAM9G45EKES || MACH_AT91CAP9ADK)
 	help
 	  On AT91SAM926x boards both types of NAND flash can be present
 	  (8 and 16 bit data bus width).
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 2975f9ab861..4eaf80abe10 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_AT91_PMC_UNIT)	+= clock.o
 obj-$(CONFIG_ARCH_AT91RM9200)	+= at91rm9200.o at91rm9200_time.o at91rm9200_devices.o
 obj-$(CONFIG_ARCH_AT91SAM9260)	+= at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o
 obj-$(CONFIG_ARCH_AT91SAM9261)	+= at91sam9261.o at91sam926x_time.o at91sam9261_devices.o sam9_smc.o
+obj-$(CONFIG_ARCH_AT91SAM9G10)	+= at91sam9261.o at91sam926x_time.o at91sam9261_devices.o sam9_smc.o
 obj-$(CONFIG_ARCH_AT91SAM9263)	+= at91sam9263.o at91sam926x_time.o at91sam9263_devices.o sam9_smc.o
 obj-$(CONFIG_ARCH_AT91SAM9RL)	+= at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o sam9_smc.o
 obj-$(CONFIG_ARCH_AT91SAM9G20)	+= at91sam9260.o at91sam926x_time.o at91sam9260_devices.o  sam9_smc.o
@@ -44,6 +45,7 @@ obj-$(CONFIG_MACH_AFEB9260)	+= board-afeb-9260v1.o
 
 # AT91SAM9261 board-specific support
 obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o
+obj-$(CONFIG_MACH_AT91SAM9G10EK) += board-sam9261ek.o
 
 # AT91SAM9263 board-specific support
 obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o
diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c
index 3acd7d7e6a4..4ecf37996c7 100644
--- a/arch/arm/mach-at91/at91sam9261.c
+++ b/arch/arm/mach-at91/at91sam9261.c
@@ -16,6 +16,7 @@
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
+#include <mach/cpu.h>
 #include <mach/at91sam9261.h>
 #include <mach/at91_pmc.h>
 #include <mach/at91_rstc.h>
@@ -30,7 +31,11 @@ static struct map_desc at91sam9261_io_desc[] __initdata = {
 		.pfn		= __phys_to_pfn(AT91_BASE_SYS),
 		.length		= SZ_16K,
 		.type		= MT_DEVICE,
-	}, {
+	},
+};
+
+static struct map_desc at91sam9261_sram_desc[] __initdata = {
+	{
 		.virtual	= AT91_IO_VIRT_BASE - AT91SAM9261_SRAM_SIZE,
 		.pfn		= __phys_to_pfn(AT91SAM9261_SRAM_BASE),
 		.length		= AT91SAM9261_SRAM_SIZE,
@@ -38,6 +43,15 @@ static struct map_desc at91sam9261_io_desc[] __initdata = {
 	},
 };
 
+static struct map_desc at91sam9g10_sram_desc[] __initdata = {
+	{
+		.virtual	= AT91_IO_VIRT_BASE - AT91SAM9G10_SRAM_SIZE,
+		.pfn		= __phys_to_pfn(AT91SAM9G10_SRAM_BASE),
+		.length		= AT91SAM9G10_SRAM_SIZE,
+		.type		= MT_DEVICE,
+	},
+};
+
 /* --------------------------------------------------------------------
  *  Clocks
  * -------------------------------------------------------------------- */
@@ -263,6 +277,12 @@ void __init at91sam9261_initialize(unsigned long main_clock)
 	/* Map peripherals */
 	iotable_init(at91sam9261_io_desc, ARRAY_SIZE(at91sam9261_io_desc));
 
+	if (cpu_is_at91sam9g10())
+		iotable_init(at91sam9g10_sram_desc, ARRAY_SIZE(at91sam9g10_sram_desc));
+	else
+		iotable_init(at91sam9261_sram_desc, ARRAY_SIZE(at91sam9261_sram_desc));
+
+
 	at91_arch_reset = at91sam9261_reset;
 	pm_power_off = at91sam9261_poweroff;
 	at91_extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1)
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index d5266da5531..f9b19993a7a 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -287,7 +287,11 @@ static void __init ek_add_device_ts(void) {}
  */
 static struct at73c213_board_info at73c213_data = {
 	.ssc_id		= 1,
+#if defined(CONFIG_MACH_AT91SAM9261EK)
 	.shortname	= "AT91SAM9261-EK external DAC",
+#else
+	.shortname	= "AT91SAM9G10-EK external DAC",
+#endif
 };
 
 #if defined(CONFIG_SND_AT73C213) || defined(CONFIG_SND_AT73C213_MODULE)
@@ -414,6 +418,9 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
 	.default_monspecs		= &at91fb_default_stn_monspecs,
 	.atmel_lcdfb_power_control	= at91_lcdc_stn_power_control,
 	.guard_time			= 1,
+#if defined(CONFIG_MACH_AT91SAM9G10EK)
+	.lcd_wiring_mode		= ATMEL_LCDC_WIRING_RGB,
+#endif
 };
 
 #else
@@ -467,6 +474,9 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
 	.default_monspecs		= &at91fb_default_tft_monspecs,
 	.atmel_lcdfb_power_control	= at91_lcdc_tft_power_control,
 	.guard_time			= 1,
+#if defined(CONFIG_MACH_AT91SAM9G10EK)
+	.lcd_wiring_mode		= ATMEL_LCDC_WIRING_RGB,
+#endif
 };
 #endif
 
@@ -600,7 +610,11 @@ static void __init ek_board_init(void)
 	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
 }
 
+#if defined(CONFIG_MACH_AT91SAM9261EK)
 MACHINE_START(AT91SAM9261EK, "Atmel AT91SAM9261-EK")
+#else
+MACHINE_START(AT91SAM9G10EK, "Atmel AT91SAM9G10-EK")
+#endif
 	/* Maintainer: Atmel */
 	.phys_io	= AT91_BASE_SYS,
 	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index e26c4fe61fa..4028724d490 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -201,7 +201,8 @@ static int at91_pm_verify_clocks(void)
 			pr_err("AT91: PM - Suspend-to-RAM with USB still active\n");
 			return 0;
 		}
-	} else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263() || cpu_is_at91sam9g20()) {
+	} else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263()
+			|| cpu_is_at91sam9g20() || cpu_is_at91sam9g10()) {
 		if ((scsr & (AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP)) != 0) {
 			pr_err("AT91: PM - Suspend-to-RAM with USB still active\n");
 			return 0;
-- 
cgit v1.2.3


From 87e8824b4588076409692b82ef4b1d98f25cd400 Mon Sep 17 00:00:00 2001
From: Alessandro Rubini <rubini@gnudd.com>
Date: Thu, 2 Jul 2009 15:28:41 +0100
Subject: [ARM] 5582/1: VIC: support ST-modified version with a split init

The Nomadik SoC (not yet merged) has a modified PL090 VIC cell. This adds
support for it by reading the PrimeCell ID at the end of the page and
calling a separate init function.

Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/common/vic.c | 88 +++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 88 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c
index 6ed89836e90..27714ab30f2 100644
--- a/arch/arm/common/vic.c
+++ b/arch/arm/common/vic.c
@@ -259,6 +259,15 @@ static struct irq_chip vic_chip = {
 	.set_wake = vic_set_wake,
 };
 
+/* The PL190 cell from ARM has been modified by ST, so handle both here */
+static void vik_init_st(void __iomem *base, unsigned int irq_start,
+			 u32 vic_sources);
+
+enum vic_vendor {
+	VENDOR_ARM = 0x41,
+	VENDOR_ST = 0x80,
+};
+
 /**
  * vic_init - initialise a vectored interrupt controller
  * @base: iomem base address
@@ -270,6 +279,28 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
 		     u32 vic_sources, u32 resume_sources)
 {
 	unsigned int i;
+	u32 cellid = 0;
+	enum vic_vendor vendor;
+
+	/* Identify which VIC cell this one is, by reading the ID */
+	for (i = 0; i < 4; i++) {
+		u32 addr = ((u32)base & PAGE_MASK) + 0xfe0 + (i * 4);
+		cellid |= (readl(addr) & 0xff) << (8 * i);
+	}
+	vendor = (cellid >> 12) & 0xff;
+	printk(KERN_INFO "VIC @%p: id 0x%08x, vendor 0x%02x\n",
+	       base, cellid, vendor);
+
+	switch(vendor) {
+	case VENDOR_ST:
+		vik_init_st(base, irq_start, vic_sources);
+		return;
+	default:
+		printk(KERN_WARNING "VIC: unknown vendor, continuing anyways\n");
+		/* fall through */
+	case VENDOR_ARM:
+		break;
+	}
 
 	/* Disable all interrupts initially. */
 
@@ -306,3 +337,60 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
 
 	vic_pm_register(base, irq_start, resume_sources);
 }
+
+/*
+ * The PL190 cell from ARM has been modified by ST to handle 64 interrupts.
+ * The original cell has 32 interrupts, while the modified one has 64,
+ * replocating two blocks 0x00..0x1f in 0x20..0x3f. In that case
+ * the probe function is called twice, with base set to offset 000
+ *  and 020 within the page. We call this "second block".
+ */
+static void __init vik_init_st(void __iomem *base, unsigned int irq_start,
+				u32 vic_sources)
+{
+	unsigned int i;
+	int vic_2nd_block = ((unsigned long)base & ~PAGE_MASK) != 0;
+
+	/* Disable all interrupts initially. */
+
+	writel(0, base + VIC_INT_SELECT);
+	writel(0, base + VIC_INT_ENABLE);
+	writel(~0, base + VIC_INT_ENABLE_CLEAR);
+	writel(0, base + VIC_IRQ_STATUS);
+	writel(0, base + VIC_ITCR);
+	writel(~0, base + VIC_INT_SOFT_CLEAR);
+
+	/*
+	 * Make sure we clear all existing interrupts. The vector registers
+	 * in this cell are after the second block of general registers,
+	 * so we can address them using standard offsets, but only from
+	 * the second base address, which is 0x20 in the page
+	 */
+	if (vic_2nd_block) {
+		writel(0, base + VIC_PL190_VECT_ADDR);
+		for (i = 0; i < 19; i++) {
+			unsigned int value;
+
+			value = readl(base + VIC_PL190_VECT_ADDR);
+			writel(value, base + VIC_PL190_VECT_ADDR);
+		}
+		/* ST has 16 vectors as well, but we don't enable them by now */
+		for (i = 0; i < 16; i++) {
+			void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4);
+			writel(0, reg);
+		}
+
+		writel(32, base + VIC_PL190_DEF_VECT_ADDR);
+	}
+
+	for (i = 0; i < 32; i++) {
+		if (vic_sources & (1 << i)) {
+			unsigned int irq = irq_start + i;
+
+			set_irq_chip(irq, &vic_chip);
+			set_irq_chip_data(irq, base);
+			set_irq_handler(irq, handle_level_irq);
+			set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+		}
+	}
+}
-- 
cgit v1.2.3


From 8c81b52422147b4b09f5adb8d0c6963342a336c6 Mon Sep 17 00:00:00 2001
From: Alessandro Rubini <rubini@gnudd.com>
Date: Thu, 2 Jul 2009 15:28:52 +0100
Subject: [ARM] 5583/1: VIC: acknowledge software interrupts

The PrimeCell Vectored Interrupt Controller offers a way to trigger
any interrupt through software. This is a useful tool for developing,
but such software interrupt can only be acked by writing a bit in the
"software clear" register, or the handler will loop forever.  This
splits ack from mask, and acks the soft irq in case it was the source.

Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/common/vic.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c
index 27714ab30f2..bc1f9ad61ff 100644
--- a/arch/arm/common/vic.c
+++ b/arch/arm/common/vic.c
@@ -26,6 +26,15 @@
 #include <asm/mach/irq.h>
 #include <asm/hardware/vic.h>
 
+static void vic_ack_irq(unsigned int irq)
+{
+	void __iomem *base = get_irq_chip_data(irq);
+	irq &= 31;
+	writel(1 << irq, base + VIC_INT_ENABLE_CLEAR);
+	/* moreover, clear the soft-triggered, in case it was the reason */
+	writel(1 << irq, base + VIC_INT_SOFT_CLEAR);
+}
+
 static void vic_mask_irq(unsigned int irq)
 {
 	void __iomem *base = get_irq_chip_data(irq);
@@ -253,7 +262,7 @@ static inline void vic_pm_register(void __iomem *base, unsigned int irq, u32 arg
 
 static struct irq_chip vic_chip = {
 	.name	= "VIC",
-	.ack	= vic_mask_irq,
+	.ack	= vic_ack_irq,
 	.mask	= vic_mask_irq,
 	.unmask	= vic_unmask_irq,
 	.set_wake = vic_set_wake,
-- 
cgit v1.2.3


From 28ad94ec61dc60207dbffdb95ff870c617fbb832 Mon Sep 17 00:00:00 2001
From: Alessandro Rubini <rubini@gnudd.com>
Date: Thu, 2 Jul 2009 19:06:47 +0100
Subject: [ARM] 5590/1: Add basic support for ST Nomadik 8815 SoC and
 evaluation board

This patch adds the basic infrastructure for the Nomadik 8815
CPU and the "Nomadik Hardware Kit" NHK8815. This patch only
includes the serial console and core stuff, no drivers.

Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/Kconfig                                 |  15 +++
 arch/arm/Makefile                                |   1 +
 arch/arm/mach-nomadik/Kconfig                    |  14 ++
 arch/arm/mach-nomadik/Makefile                   |  16 +++
 arch/arm/mach-nomadik/Makefile.boot              |   4 +
 arch/arm/mach-nomadik/board-nhk8815.c            |  75 +++++++++++
 arch/arm/mach-nomadik/clock.c                    |  45 +++++++
 arch/arm/mach-nomadik/clock.h                    |  14 ++
 arch/arm/mach-nomadik/cpu-8815.c                 |  58 ++++++++
 arch/arm/mach-nomadik/include/mach/clkdev.h      |   7 +
 arch/arm/mach-nomadik/include/mach/debug-macro.S |  22 +++
 arch/arm/mach-nomadik/include/mach/entry-macro.S |  43 ++++++
 arch/arm/mach-nomadik/include/mach/hardware.h    |  90 +++++++++++++
 arch/arm/mach-nomadik/include/mach/io.h          |  22 +++
 arch/arm/mach-nomadik/include/mach/irqs.h        |  82 ++++++++++++
 arch/arm/mach-nomadik/include/mach/memory.h      |  28 ++++
 arch/arm/mach-nomadik/include/mach/mtu.h         |  45 +++++++
 arch/arm/mach-nomadik/include/mach/setup.h       |  22 +++
 arch/arm/mach-nomadik/include/mach/system.h      |  45 +++++++
 arch/arm/mach-nomadik/include/mach/timex.h       |   6 +
 arch/arm/mach-nomadik/include/mach/uncompress.h  |  63 +++++++++
 arch/arm/mach-nomadik/include/mach/vmalloc.h     |   2 +
 arch/arm/mach-nomadik/timer.c                    | 164 +++++++++++++++++++++++
 23 files changed, 883 insertions(+)
 create mode 100644 arch/arm/mach-nomadik/Kconfig
 create mode 100644 arch/arm/mach-nomadik/Makefile
 create mode 100644 arch/arm/mach-nomadik/Makefile.boot
 create mode 100644 arch/arm/mach-nomadik/board-nhk8815.c
 create mode 100644 arch/arm/mach-nomadik/clock.c
 create mode 100644 arch/arm/mach-nomadik/clock.h
 create mode 100644 arch/arm/mach-nomadik/cpu-8815.c
 create mode 100644 arch/arm/mach-nomadik/include/mach/clkdev.h
 create mode 100644 arch/arm/mach-nomadik/include/mach/debug-macro.S
 create mode 100644 arch/arm/mach-nomadik/include/mach/entry-macro.S
 create mode 100644 arch/arm/mach-nomadik/include/mach/hardware.h
 create mode 100644 arch/arm/mach-nomadik/include/mach/io.h
 create mode 100644 arch/arm/mach-nomadik/include/mach/irqs.h
 create mode 100644 arch/arm/mach-nomadik/include/mach/memory.h
 create mode 100644 arch/arm/mach-nomadik/include/mach/mtu.h
 create mode 100644 arch/arm/mach-nomadik/include/mach/setup.h
 create mode 100644 arch/arm/mach-nomadik/include/mach/system.h
 create mode 100644 arch/arm/mach-nomadik/include/mach/timex.h
 create mode 100644 arch/arm/mach-nomadik/include/mach/uncompress.h
 create mode 100644 arch/arm/mach-nomadik/include/mach/vmalloc.h
 create mode 100644 arch/arm/mach-nomadik/timer.c

(limited to 'arch')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index aef63c8e3d2..d8cfd706501 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -327,6 +327,19 @@ config ARCH_H720X
 	help
 	  This enables support for systems based on the Hynix HMS720x
 
+config ARCH_NOMADIK
+	bool "STMicroelectronics Nomadik"
+	select ARM_AMBA
+	select ARM_VIC
+	select CPU_ARM926T
+	select HAVE_CLK
+	select COMMON_CLKDEV
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+
+	help
+	  Support for the Nomadik platform by ST-Ericsson
+
 config ARCH_IOP13XX
 	bool "IOP13xx-based"
 	depends on MMU
@@ -716,6 +729,8 @@ source "arch/arm/mach-at91/Kconfig"
 
 source "arch/arm/plat-mxc/Kconfig"
 
+source "arch/arm/mach-nomadik/Kconfig"
+
 source "arch/arm/mach-netx/Kconfig"
 
 source "arch/arm/mach-ns9xxx/Kconfig"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index c877d6df23d..97cca075d0f 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -137,6 +137,7 @@ machine-$(CONFIG_ARCH_MX1)		:= mx1
 machine-$(CONFIG_ARCH_MX2)		:= mx2
 machine-$(CONFIG_ARCH_MX3)		:= mx3
 machine-$(CONFIG_ARCH_NETX)		:= netx
+machine-$(CONFIG_ARCH_NOMADIK)		:= nomadik
 machine-$(CONFIG_ARCH_NS9XXX)		:= ns9xxx
 machine-$(CONFIG_ARCH_OMAP1)		:= omap1
 machine-$(CONFIG_ARCH_OMAP2)		:= omap2
diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig
new file mode 100644
index 00000000000..abce2346106
--- /dev/null
+++ b/arch/arm/mach-nomadik/Kconfig
@@ -0,0 +1,14 @@
+if ARCH_NOMADIK
+
+menu "Nomadik boards"
+
+config MACH_NOMADIK_8815NHK
+	bool "ST 8815 Nomadik Hardware Kit (evaluation board)"
+	select NOMADIK_8815
+
+endmenu
+
+config NOMADIK_8815
+	bool
+
+endif
diff --git a/arch/arm/mach-nomadik/Makefile b/arch/arm/mach-nomadik/Makefile
new file mode 100644
index 00000000000..fa97769fe70
--- /dev/null
+++ b/arch/arm/mach-nomadik/Makefile
@@ -0,0 +1,16 @@
+#
+# Makefile for the linux kernel.
+#
+# Note! Dependencies are done automagically by 'make dep', which also
+# removes any old dependencies. DON'T put your own dependencies here
+# unless it's something special (ie not a .c file).
+
+# Object file lists.
+
+obj-y			+= clock.o timer.o
+
+# Cpu revision
+obj-$(CONFIG_NOMADIK_8815) += cpu-8815.o
+
+# Specific board support
+obj-$(CONFIG_MACH_NOMADIK_8815NHK) += board-nhk8815.o
diff --git a/arch/arm/mach-nomadik/Makefile.boot b/arch/arm/mach-nomadik/Makefile.boot
new file mode 100644
index 00000000000..c7e75acfe6c
--- /dev/null
+++ b/arch/arm/mach-nomadik/Makefile.boot
@@ -0,0 +1,4 @@
+   zreladdr-y	:= 0x00008000
+params_phys-y	:= 0x00000100
+initrd_phys-y	:= 0x00800000
+
diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
new file mode 100644
index 00000000000..eebca614d36
--- /dev/null
+++ b/arch/arm/mach-nomadik/board-nhk8815.c
@@ -0,0 +1,75 @@
+/*
+ *  linux/arch/arm/mach-nomadik/board-8815nhk.c
+ *
+ *  Copyright (C) STMicroelectronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ *  NHK15 board specifc driver definition
+ */
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/amba/bus.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <mach/setup.h>
+#include "clock.h"
+
+#define __MEM_4K_RESOURCE(x) \
+	.res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM}
+
+static struct amba_device uart0_device = {
+	.dev = { .init_name = "uart0" },
+	__MEM_4K_RESOURCE(NOMADIK_UART0_BASE),
+	.irq = {IRQ_UART0, NO_IRQ},
+};
+
+static struct amba_device uart1_device = {
+	.dev = { .init_name = "uart1" },
+	__MEM_4K_RESOURCE(NOMADIK_UART1_BASE),
+	.irq = {IRQ_UART1, NO_IRQ},
+};
+
+static struct amba_device *amba_devs[] __initdata = {
+	&uart0_device,
+	&uart1_device,
+};
+
+/* We have a fixed clock alone, by now */
+static struct clk nhk8815_clk_48 = {
+	.rate = 48*1000*1000,
+};
+
+static struct platform_device *nhk8815_platform_devices[] __initdata = {
+	/* currently empty, will add keypad, touchscreen etc */
+};
+
+static void __init nhk8815_platform_init(void)
+{
+	int i;
+
+	cpu8815_platform_init();
+	platform_add_devices(nhk8815_platform_devices,
+			     ARRAY_SIZE(nhk8815_platform_devices));
+
+	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
+		nmdk_clk_create(&nhk8815_clk_48, amba_devs[i]->dev.init_name);
+		amba_device_register(amba_devs[i], &iomem_resource);
+	}
+}
+
+MACHINE_START(NOMADIK, "NHK8815")
+	/* Maintainer: ST MicroElectronics */
+	.phys_io	= NOMADIK_UART0_BASE,
+	.io_pg_offst	= (IO_ADDRESS(NOMADIK_UART0_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x100,
+	.map_io		= cpu8815_map_io,
+	.init_irq	= cpu8815_init_irq,
+	.timer		= &nomadik_timer,
+	.init_machine	= nhk8815_platform_init,
+MACHINE_END
diff --git a/arch/arm/mach-nomadik/clock.c b/arch/arm/mach-nomadik/clock.c
new file mode 100644
index 00000000000..9f92502a008
--- /dev/null
+++ b/arch/arm/mach-nomadik/clock.c
@@ -0,0 +1,45 @@
+/*
+ *  linux/arch/arm/mach-nomadik/clock.c
+ *
+ *  Copyright (C) 2009 Alessandro Rubini
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/clk.h>
+#include <asm/clkdev.h>
+#include "clock.h"
+
+/*
+ * The nomadik board uses generic clocks, but the serial pl011 file
+ * calls clk_enable(), clk_disable(), clk_get_rate(), so we provide them
+ */
+unsigned long clk_get_rate(struct clk *clk)
+{
+	return clk->rate;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+/* enable and disable do nothing */
+int clk_enable(struct clk *clk)
+{
+	return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_disable);
+
+/* Create a clock structure with the given name */
+int nmdk_clk_create(struct clk *clk, const char *dev_id)
+{
+	struct clk_lookup *clkdev;
+
+	clkdev = clkdev_alloc(clk, NULL, dev_id);
+	if (!clkdev)
+		return -ENOMEM;
+	clkdev_add(clkdev);
+	return 0;
+}
diff --git a/arch/arm/mach-nomadik/clock.h b/arch/arm/mach-nomadik/clock.h
new file mode 100644
index 00000000000..235faec7f62
--- /dev/null
+++ b/arch/arm/mach-nomadik/clock.h
@@ -0,0 +1,14 @@
+
+/*
+ *  linux/arch/arm/mach-nomadik/clock.h
+ *
+ *  Copyright (C) 2009 Alessandro Rubini
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+struct clk {
+	unsigned long		rate;
+};
+extern int nmdk_clk_create(struct clk *clk, const char *dev_id);
diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c
new file mode 100644
index 00000000000..dec42da6956
--- /dev/null
+++ b/arch/arm/mach-nomadik/cpu-8815.c
@@ -0,0 +1,58 @@
+/*
+ * Copyright STMicroelectronics, 2007.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/device.h>
+
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <asm/mach/map.h>
+#include <asm/hardware/vic.h>
+
+/* All SoC devices live in the same area (see hardware.h) */
+static struct map_desc nomadik_io_desc[] __initdata = {
+	{
+		.virtual =	NOMADIK_IO_VIRTUAL,
+		.pfn =		__phys_to_pfn(NOMADIK_IO_PHYSICAL),
+		.length =	NOMADIK_IO_SIZE,
+		.type = 	MT_DEVICE,
+	}
+	/* static ram and secured ram may be added later */
+};
+
+void __init cpu8815_map_io(void)
+{
+	iotable_init(nomadik_io_desc, ARRAY_SIZE(nomadik_io_desc));
+}
+
+void __init cpu8815_init_irq(void)
+{
+	/* This modified VIC cell has two register blocks, at 0 and 0x20 */
+	vic_init(io_p2v(NOMADIK_IC_BASE + 0x00), IRQ_VIC_START +  0, ~0, 0);
+	vic_init(io_p2v(NOMADIK_IC_BASE + 0x20), IRQ_VIC_START + 32, ~0, 0);
+}
+
+/*
+ * This function is called from the board init ("init_machine").
+ * Currently nothing is done as we can't register amba devs so early.
+ */
+ void __init cpu8815_platform_init(void)
+{
+	 return;
+}
diff --git a/arch/arm/mach-nomadik/include/mach/clkdev.h b/arch/arm/mach-nomadik/include/mach/clkdev.h
new file mode 100644
index 00000000000..04b37a89801
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/clkdev.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif
diff --git a/arch/arm/mach-nomadik/include/mach/debug-macro.S b/arch/arm/mach-nomadik/include/mach/debug-macro.S
new file mode 100644
index 00000000000..e876990e156
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/debug-macro.S
@@ -0,0 +1,22 @@
+/*
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx, #0x10000000	@ physical base address
+		movne	\rx, #0xf0000000	@ virtual base
+		add	\rx, \rx, #0x00100000
+		add	\rx, \rx, #0x000fb000
+		.endm
+
+#include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-nomadik/include/mach/entry-macro.S b/arch/arm/mach-nomadik/include/mach/entry-macro.S
new file mode 100644
index 00000000000..49f1aa3bb42
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/entry-macro.S
@@ -0,0 +1,43 @@
+/*
+ * Low-level IRQ helper macros for Nomadik platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+
+	.macro	disable_fiq
+	.endm
+
+	.macro	get_irqnr_preamble, base, tmp
+	ldr	\base, =IO_ADDRESS(NOMADIK_IC_BASE)
+	.endm
+
+	.macro	arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+	/* This stanza gets the irq mask from one of two status registers */
+	mov	\irqnr, #0
+	ldr	\irqstat, [\base, #VIC_REG_IRQSR0]	@ get masked status
+	cmp	\irqstat, #0
+	bne	1001f
+	add	\irqnr, \irqnr, #32
+	ldr	\irqstat, [\base, #VIC_REG_IRQSR1]	@ get masked status
+
+1001:	tst	\irqstat, #15
+	bne	1002f
+	add	\irqnr, \irqnr, #4
+	movs	\irqstat, \irqstat, lsr #4
+	bne	1001b
+1002:	tst	\irqstat, #1
+	bne	1003f
+	add	\irqnr, \irqnr, #1
+	movs	\irqstat, \irqstat, lsr #1
+	bne	1002b
+1003:	/* EQ will be set if no irqs pending */
+	.endm
diff --git a/arch/arm/mach-nomadik/include/mach/hardware.h b/arch/arm/mach-nomadik/include/mach/hardware.h
new file mode 100644
index 00000000000..6316dba3bfc
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/hardware.h
@@ -0,0 +1,90 @@
+/*
+ * This file contains the hardware definitions of the Nomadik.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * YOU should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+/* Nomadik registers live from 0x1000.0000 to 0x1023.0000 -- currently */
+#define NOMADIK_IO_VIRTUAL	0xF0000000	/* VA of IO  */
+#define NOMADIK_IO_PHYSICAL	0x10000000	/* PA of IO */
+#define NOMADIK_IO_SIZE		0x00300000	/* 3MB for all regs */
+
+/* used in C code, so cast to proper type */
+#define io_p2v(x) ((void __iomem *)(x) \
+			- NOMADIK_IO_PHYSICAL + NOMADIK_IO_VIRTUAL)
+#define io_v2p(x) ((unsigned long)(x) \
+			- NOMADIK_IO_VIRTUAL + NOMADIK_IO_PHYSICAL)
+
+/* used in asm code, so no casts */
+#define IO_ADDRESS(x) ((x) - NOMADIK_IO_PHYSICAL + NOMADIK_IO_VIRTUAL)
+
+/*
+ *   Base address defination for Nomadik Onchip Logic Block
+ */
+#define NOMADIK_FSMC_BASE	0x10100000	/* FSMC registers */
+#define NOMADIK_SDRAMC_BASE	0x10110000	/* SDRAM Controller */
+#define NOMADIK_CLCDC_BASE	0x10120000	/* CLCD Controller */
+#define NOMADIK_MDIF_BASE	0x10120000	/* MDIF */
+#define NOMADIK_DMA0_BASE	0x10130000	/* DMA0 Controller */
+#define NOMADIK_IC_BASE		0x10140000	/* Vectored Irq Controller */
+#define NOMADIK_DMA1_BASE	0x10150000	/* DMA1 Controller */
+#define NOMADIK_USB_BASE	0x10170000	/* USB-OTG conf reg base */
+#define NOMADIK_CRYP_BASE	0x10180000	/* Crypto processor */
+#define NOMADIK_SHA1_BASE	0x10190000	/* SHA-1 Processor */
+#define NOMADIK_XTI_BASE	0x101A0000	/* XTI */
+#define NOMADIK_RNG_BASE	0x101B0000	/* Random number generator */
+#define NOMADIK_SRC_BASE	0x101E0000	/* SRC base */
+#define NOMADIK_WDOG_BASE	0x101E1000	/* Watchdog */
+#define NOMADIK_MTU0_BASE	0x101E2000	/* Multiple Timer 0 */
+#define NOMADIK_MTU1_BASE	0x101E3000	/* Multiple Timer 1 */
+#define NOMADIK_GPIO0_BASE	0x101E4000	/* GPIO0 */
+#define NOMADIK_GPIO1_BASE	0x101E5000	/* GPIO1 */
+#define NOMADIK_GPIO2_BASE	0x101E6000	/* GPIO2 */
+#define NOMADIK_GPIO3_BASE	0x101E7000	/* GPIO3 */
+#define NOMADIK_RTC_BASE	0x101E8000	/* Real Time Clock base */
+#define NOMADIK_PMU_BASE	0x101E9000	/* Power Management Unit */
+#define NOMADIK_OWM_BASE	0x101EA000	/* One wire master */
+#define NOMADIK_SCR_BASE	0x101EF000	/* Secure Control registers */
+#define NOMADIK_MSP2_BASE	0x101F0000	/* MSP 2 interface */
+#define NOMADIK_MSP1_BASE	0x101F1000	/* MSP 1 interface */
+#define NOMADIK_UART2_BASE	0x101F2000	/* UART 2 interface */
+#define NOMADIK_SSIRx_BASE	0x101F3000	/* SSI 8-ch rx interface */
+#define NOMADIK_SSITx_BASE	0x101F4000	/* SSI 8-ch tx interface */
+#define NOMADIK_MSHC_BASE	0x101F5000	/* Memory Stick(Pro) Host */
+#define NOMADIK_SDI_BASE	0x101F6000	/* SD-card/MM-Card */
+#define NOMADIK_I2C1_BASE	0x101F7000	/* I2C1 interface */
+#define NOMADIK_I2C0_BASE	0x101F8000	/* I2C0 interface */
+#define NOMADIK_MSP0_BASE	0x101F9000	/* MSP 0 interface  */
+#define NOMADIK_FIRDA_BASE	0x101FA000	/* FIrDA interface  */
+#define NOMADIK_UART1_BASE	0x101FB000	/* UART 1 interface */
+#define NOMADIK_SSP_BASE	0x101FC000	/* SSP interface  */
+#define NOMADIK_UART0_BASE	0x101FD000	/* UART 0 interface */
+#define NOMADIK_SGA_BASE	0x101FE000	/* SGA interface */
+#define NOMADIK_L2CC_BASE	0x10210000	/* L2 Cache controller */
+
+/* Other ranges, not for p2v/v2p */
+#define NOMADIK_BACKUP_RAM	0x80010000
+#define NOMADIK_EBROM		0x80000000	/* Embedded boot ROM */
+#define NOMADIK_HAMACV_DMEM_BASE 0xA0100000	/* HAMACV Data Memory Start */
+#define NOMADIK_HAMACV_DMEM_END	0xA01FFFFF	/* HAMACV Data Memory End */
+#define NOMADIK_HAMACA_DMEM	0xA0200000	/* HAMACA Data Memory Space */
+
+#define NOMADIK_FSMC_VA		IO_ADDRESS(NOMADIK_FSMC_BASE)
+#define NOMADIK_MTU0_VA		IO_ADDRESS(NOMADIK_MTU0_BASE)
+#define NOMADIK_MTU1_VA		IO_ADDRESS(NOMADIK_MTU1_BASE)
+
+#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-nomadik/include/mach/io.h b/arch/arm/mach-nomadik/include/mach/io.h
new file mode 100644
index 00000000000..2e1eca1b824
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/io.h
@@ -0,0 +1,22 @@
+/*
+ * arch/arm/mach-nomadik/include/mach/io.h   (copied from mach-sa1100)
+ *
+ * Copyright (C) 1997-1999 Russell King
+ *
+ * Modifications:
+ *  06-12-1997  RMK     Created.
+ *  07-04-1999  RMK     Major cleanup
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * We don't actually have real ISA nor PCI buses, but there is so many
+ * drivers out there that might just work if we fake them...
+ */
+#define __io(a)         __typesafe_io(a)
+#define __mem_pci(a)    (a)
+
+#endif
diff --git a/arch/arm/mach-nomadik/include/mach/irqs.h b/arch/arm/mach-nomadik/include/mach/irqs.h
new file mode 100644
index 00000000000..8faabc56039
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/irqs.h
@@ -0,0 +1,82 @@
+/*
+ *  mach-nomadik/include/mach/irqs.h
+ *
+ *  Copyright (C) ST Microelectronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#include <mach/hardware.h>
+
+#define IRQ_VIC_START		0	/* first VIC interrupt is 0 */
+
+/*
+ * Interrupt numbers generic for all Nomadik Chip cuts
+ */
+#define IRQ_WATCHDOG			0
+#define IRQ_SOFTINT			1
+#define IRQ_CRYPTO			2
+#define IRQ_OWM				3
+#define IRQ_MTU0			4
+#define IRQ_MTU1			5
+#define IRQ_GPIO0			6
+#define IRQ_GPIO1			7
+#define IRQ_GPIO2			8
+#define IRQ_GPIO3			9
+#define IRQ_RTC_RTT			10
+#define IRQ_SSP				11
+#define IRQ_UART0			12
+#define IRQ_DMA1			13
+#define IRQ_CLCD_MDIF			14
+#define IRQ_DMA0			15
+#define IRQ_PWRFAIL			16
+#define IRQ_UART1			17
+#define IRQ_FIRDA			18
+#define IRQ_MSP0			19
+#define IRQ_I2C0			20
+#define IRQ_I2C1			21
+#define IRQ_SDMMC			22
+#define IRQ_USBOTG			23
+#define IRQ_SVA_IT0			24
+#define IRQ_SVA_IT1			25
+#define IRQ_SAA_IT0			26
+#define IRQ_SAA_IT1			27
+#define IRQ_UART2			28
+#define IRQ_MSP2			31
+#define IRQ_L2CC			48
+#define IRQ_HPI				49
+#define IRQ_SKE				50
+#define IRQ_KP				51
+#define IRQ_MEMST			54
+#define IRQ_SGA_IT			58
+#define IRQ_USBM			60
+#define IRQ_MSP1			62
+
+#define NOMADIK_SOC_NR_IRQS		64
+
+/* After chip-specific IRQ numbers we have the GPIO ones */
+#define NOMADIK_NR_GPIO			128 /* last 4 not wired to pins */
+#define NOMADIK_GPIO_TO_IRQ(gpio)	((gpio) + NOMADIK_SOC_NR_IRQS)
+#define NOMADIK_IRQ_TO_GPIO(irq)	((irq) - NOMADIK_SOC_NR_IRQS)
+#define NR_IRQS				NOMADIK_GPIO_TO_IRQ(NOMADIK_NR_GPIO)
+
+/* Following two are used by entry_macro.S, to access our dual-vic */
+#define VIC_REG_IRQSR0		0
+#define VIC_REG_IRQSR1		0x20
+
+#endif /* __ASM_ARCH_IRQS_H */
+
diff --git a/arch/arm/mach-nomadik/include/mach/memory.h b/arch/arm/mach-nomadik/include/mach/memory.h
new file mode 100644
index 00000000000..1e5689d98ec
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/memory.h
@@ -0,0 +1,28 @@
+/*
+ *  mach-nomadik/include/mach/memory.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET	UL(0x00000000)
+
+#endif
diff --git a/arch/arm/mach-nomadik/include/mach/mtu.h b/arch/arm/mach-nomadik/include/mach/mtu.h
new file mode 100644
index 00000000000..76da7f08533
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/mtu.h
@@ -0,0 +1,45 @@
+#ifndef __ASM_ARCH_MTU_H
+#define __ASM_ARCH_MTU_H
+
+/*
+ * The MTU device hosts four different counters, with 4 set of
+ * registers. These are register names.
+ */
+
+#define MTU_IMSC	0x00	/* Interrupt mask set/clear */
+#define MTU_RIS		0x04	/* Raw interrupt status */
+#define MTU_MIS		0x08	/* Masked interrupt status */
+#define MTU_ICR		0x0C	/* Interrupt clear register */
+
+/* per-timer registers take 0..3 as argument */
+#define MTU_LR(x)	(0x10 + 0x10 * (x) + 0x00)	/* Load value */
+#define MTU_VAL(x)	(0x10 + 0x10 * (x) + 0x04)	/* Current value */
+#define MTU_CR(x)	(0x10 + 0x10 * (x) + 0x08)	/* Control reg */
+#define MTU_BGLR(x)	(0x10 + 0x10 * (x) + 0x0c)	/* At next overflow */
+
+/* bits for the control register */
+#define MTU_CRn_ENA		0x80
+#define MTU_CRn_PERIODIC	0x40	/* if 0 = free-running */
+#define MTU_CRn_PRESCALE_MASK	0x0c
+#define MTU_CRn_PRESCALE_1		0x00
+#define MTU_CRn_PRESCALE_16		0x04
+#define MTU_CRn_PRESCALE_256		0x08
+#define MTU_CRn_32BITS		0x02
+#define MTU_CRn_ONESHOT		0x01	/* if 0 = wraps reloading from BGLR*/
+
+/* Other registers are usual amba/primecell registers, currently not used */
+#define MTU_ITCR	0xff0
+#define MTU_ITOP	0xff4
+
+#define MTU_PERIPH_ID0	0xfe0
+#define MTU_PERIPH_ID1	0xfe4
+#define MTU_PERIPH_ID2	0xfe8
+#define MTU_PERIPH_ID3	0xfeC
+
+#define MTU_PCELL0	0xff0
+#define MTU_PCELL1	0xff4
+#define MTU_PCELL2	0xff8
+#define MTU_PCELL3	0xffC
+
+#endif /* __ASM_ARCH_MTU_H */
+
diff --git a/arch/arm/mach-nomadik/include/mach/setup.h b/arch/arm/mach-nomadik/include/mach/setup.h
new file mode 100644
index 00000000000..a4e468cf63d
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/setup.h
@@ -0,0 +1,22 @@
+
+/*
+ * These symbols are needed for board-specific files to call their
+ * own cpu-specific files
+ */
+
+#ifndef __ASM_ARCH_SETUP_H
+#define __ASM_ARCH_SETUP_H
+
+#include <asm/mach/time.h>
+#include <linux/init.h>
+
+#ifdef CONFIG_NOMADIK_8815
+
+extern void cpu8815_map_io(void);
+extern void cpu8815_platform_init(void);
+extern void cpu8815_init_irq(void);
+extern struct sys_timer nomadik_timer;
+
+#endif /* NOMADIK_8815 */
+
+#endif /*  __ASM_ARCH_SETUP_H */
diff --git a/arch/arm/mach-nomadik/include/mach/system.h b/arch/arm/mach-nomadik/include/mach/system.h
new file mode 100644
index 00000000000..7119f688116
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/system.h
@@ -0,0 +1,45 @@
+/*
+ *  mach-nomadik/include/mach/system.h
+ *
+ *  Copyright (C) 2008 STMicroelectronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <linux/io.h>
+#include <mach/hardware.h>
+
+static inline void arch_idle(void)
+{
+	/*
+	 * This should do all the clock switching
+	 * and wait for interrupt tricks
+	 */
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode, const char *cmd)
+{
+	void __iomem *src_rstsr = io_p2v(NOMADIK_SRC_BASE + 0x18);
+
+	/* FIXME: use egpio when implemented */
+
+	/* Write anything to Reset status register */
+	writel(1, src_rstsr);
+}
+
+#endif
diff --git a/arch/arm/mach-nomadik/include/mach/timex.h b/arch/arm/mach-nomadik/include/mach/timex.h
new file mode 100644
index 00000000000..318b8896ce9
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/timex.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+#define CLOCK_TICK_RATE         2400000
+
+#endif
diff --git a/arch/arm/mach-nomadik/include/mach/uncompress.h b/arch/arm/mach-nomadik/include/mach/uncompress.h
new file mode 100644
index 00000000000..071003bc845
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/uncompress.h
@@ -0,0 +1,63 @@
+/*
+ *  Copyright (C) 2008 STMicroelectronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <asm/setup.h>
+#include <asm/io.h>
+#include <mach/hardware.h>
+
+/* we need the constants in amba/serial.h, but it refers to amba_device */
+struct amba_device;
+#include <linux/amba/serial.h>
+
+#define NOMADIK_UART_DR		0x101FB000
+#define NOMADIK_UART_LCRH	0x101FB02c
+#define NOMADIK_UART_CR		0x101FB030
+#define NOMADIK_UART_FR		0x101FB018
+
+static void putc(const char c)
+{
+	/* Do nothing if the UART is not enabled. */
+	if (!(readb(NOMADIK_UART_CR) & UART01x_CR_UARTEN))
+		return;
+
+	if (c == '\n')
+		putc('\r');
+
+	while (readb(NOMADIK_UART_FR) & UART01x_FR_TXFF)
+		barrier();
+	writeb(c, NOMADIK_UART_DR);
+}
+
+static void flush(void)
+{
+	if (!(readb(NOMADIK_UART_CR) & UART01x_CR_UARTEN))
+		return;
+	while (readb(NOMADIK_UART_FR) & UART01x_FR_BUSY)
+		barrier();
+}
+
+static inline void arch_decomp_setup(void)
+{
+}
+
+#define arch_decomp_wdog() /* nothing to do here */
+
+#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-nomadik/include/mach/vmalloc.h b/arch/arm/mach-nomadik/include/mach/vmalloc.h
new file mode 100644
index 00000000000..be12e31ea52
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/vmalloc.h
@@ -0,0 +1,2 @@
+
+#define VMALLOC_END       0xe8000000
diff --git a/arch/arm/mach-nomadik/timer.c b/arch/arm/mach-nomadik/timer.c
new file mode 100644
index 00000000000..d1738e7061d
--- /dev/null
+++ b/arch/arm/mach-nomadik/timer.c
@@ -0,0 +1,164 @@
+/*
+ *  linux/arch/arm/mach-nomadik/timer.c
+ *
+ * Copyright (C) 2008 STMicroelectronics
+ * Copyright (C) 2009 Alessandro Rubini, somewhat based on at91sam926x
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/clockchips.h>
+#include <linux/jiffies.h>
+#include <asm/mach/time.h>
+#include <mach/mtu.h>
+
+#define TIMER_CTRL	0x80	/* No divisor */
+#define TIMER_PERIODIC	0x40
+#define TIMER_SZ32BIT	0x02
+
+/* Initial value for SRC control register: all timers use MXTAL/8 source */
+#define SRC_CR_INIT_MASK	0x00007fff
+#define SRC_CR_INIT_VAL		0x2aaa8000
+
+static u32	nmdk_count;		/* accumulated count */
+static u32	nmdk_cycle;		/* write-once */
+static __iomem void *mtu_base;
+
+/*
+ * clocksource: the MTU device is a decrementing counters, so we negate
+ * the value being read.
+ */
+static cycle_t nmdk_read_timer(struct clocksource *cs)
+{
+	u32 count = readl(mtu_base + MTU_VAL(0));
+	return nmdk_count + nmdk_cycle - count;
+
+}
+
+static struct clocksource nmdk_clksrc = {
+	.name		= "mtu_0",
+	.rating		= 120,
+	.read		= nmdk_read_timer,
+	.shift		= 20,
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+/*
+ * Clockevent device: currently only periodic mode is supported
+ */
+static void nmdk_clkevt_mode(enum clock_event_mode mode,
+			     struct clock_event_device *dev)
+{
+	unsigned long flags;
+
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		/* enable interrupts -- and count current value? */
+		raw_local_irq_save(flags);
+		writel(readl(mtu_base + MTU_IMSC) | 1, mtu_base + MTU_IMSC);
+		raw_local_irq_restore(flags);
+		break;
+	case CLOCK_EVT_MODE_ONESHOT:
+		BUG(); /* Not supported, yet */
+		/* FALLTHROUGH */
+	case CLOCK_EVT_MODE_SHUTDOWN:
+	case CLOCK_EVT_MODE_UNUSED:
+		/* disable irq */
+		raw_local_irq_save(flags);
+		writel(readl(mtu_base + MTU_IMSC) & ~1, mtu_base + MTU_IMSC);
+		raw_local_irq_restore(flags);
+		break;
+	case CLOCK_EVT_MODE_RESUME:
+		break;
+	}
+}
+
+static struct clock_event_device nmdk_clkevt = {
+	.name		= "mtu_0",
+	.features	= CLOCK_EVT_FEAT_PERIODIC,
+	.shift		= 32,
+	.rating		= 100,
+	.set_mode	= nmdk_clkevt_mode,
+};
+
+/*
+ * IRQ Handler for the timer 0 of the MTU block. The irq is not shared
+ * as we are the only users of mtu0 by now.
+ */
+static irqreturn_t nmdk_timer_interrupt(int irq, void *dev_id)
+{
+	/* ack: "interrupt clear register" */
+	writel( 1 << 0, mtu_base + MTU_ICR);
+
+	/* we can't count lost ticks, unfortunately */
+	nmdk_count += nmdk_cycle;
+	nmdk_clkevt.event_handler(&nmdk_clkevt);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * Set up timer interrupt, and return the current time in seconds.
+ */
+static struct irqaction nmdk_timer_irq = {
+	.name		= "Nomadik Timer Tick",
+	.flags		= IRQF_DISABLED | IRQF_TIMER,
+	.handler	= nmdk_timer_interrupt,
+};
+
+static void nmdk_timer_reset(void)
+{
+	u32 cr;
+
+	writel(0, mtu_base + MTU_CR(0)); /* off */
+
+	/* configure load and background-load, and fire it up */
+	writel(nmdk_cycle, mtu_base + MTU_LR(0));
+	writel(nmdk_cycle, mtu_base + MTU_BGLR(0));
+	cr = MTU_CRn_PERIODIC | MTU_CRn_PRESCALE_1 | MTU_CRn_32BITS;
+	writel(cr, mtu_base + MTU_CR(0));
+	writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(0));
+}
+
+static void __init nmdk_timer_init(void)
+{
+	u32 src_cr;
+	unsigned long rate;
+	int bits;
+
+	rate = CLOCK_TICK_RATE; /* 2.4MHz */
+	nmdk_cycle = (rate + HZ/2) / HZ;
+
+	/* Configure timer sources in "system reset controller" ctrl reg */
+	src_cr = readl(io_p2v(NOMADIK_SRC_BASE));
+	src_cr &= SRC_CR_INIT_MASK;
+	src_cr |= SRC_CR_INIT_VAL;
+	writel(src_cr, io_p2v(NOMADIK_SRC_BASE));
+
+	/* Save global pointer to mtu, used by functions above */
+	mtu_base = io_p2v(NOMADIK_MTU0_BASE);
+
+	/* Init the timer and register clocksource */
+	nmdk_timer_reset();
+
+	nmdk_clksrc.mult = clocksource_hz2mult(rate, nmdk_clksrc.shift);
+	bits =  8*sizeof(nmdk_count);
+	nmdk_clksrc.mask = CLOCKSOURCE_MASK(bits);
+
+	clocksource_register(&nmdk_clksrc);
+
+	/* Register irq and clockevents */
+	setup_irq(IRQ_MTU0, &nmdk_timer_irq);
+	nmdk_clkevt.mult = div_sc(rate, NSEC_PER_SEC, nmdk_clkevt.shift);
+	nmdk_clkevt.cpumask = cpumask_of(0);
+	clockevents_register_device(&nmdk_clkevt);
+}
+
+struct sys_timer nomadik_timer = {
+	.init		= nmdk_timer_init,
+};
-- 
cgit v1.2.3


From 2ec1d3594563e0283873e24bb5d100dffee5d568 Mon Sep 17 00:00:00 2001
From: Alessandro Rubini <rubini@gnudd.com>
Date: Thu, 2 Jul 2009 15:29:12 +0100
Subject: [ARM] 5584/1: nomadik: add gpio driver and devices

Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/Kconfig                          |   3 +-
 arch/arm/mach-nomadik/Makefile            |   2 +-
 arch/arm/mach-nomadik/cpu-8815.c          |  75 ++++++
 arch/arm/mach-nomadik/gpio.c              | 396 ++++++++++++++++++++++++++++++
 arch/arm/mach-nomadik/include/mach/gpio.h |  71 ++++++
 5 files changed, 545 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm/mach-nomadik/gpio.c
 create mode 100644 arch/arm/mach-nomadik/include/mach/gpio.h

(limited to 'arch')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index d8cfd706501..b1093d8786b 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -336,7 +336,8 @@ config ARCH_NOMADIK
 	select COMMON_CLKDEV
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
-
+	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
 	help
 	  Support for the Nomadik platform by ST-Ericsson
 
diff --git a/arch/arm/mach-nomadik/Makefile b/arch/arm/mach-nomadik/Makefile
index fa97769fe70..3fc43543e6e 100644
--- a/arch/arm/mach-nomadik/Makefile
+++ b/arch/arm/mach-nomadik/Makefile
@@ -7,7 +7,7 @@
 
 # Object file lists.
 
-obj-y			+= clock.o timer.o
+obj-y			+= clock.o timer.o gpio.o
 
 # Cpu revision
 obj-$(CONFIG_NOMADIK_8815) += cpu-8815.o
diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c
index dec42da6956..9917a9abdb5 100644
--- a/arch/arm/mach-nomadik/cpu-8815.c
+++ b/arch/arm/mach-nomadik/cpu-8815.c
@@ -19,12 +19,87 @@
 #include <linux/types.h>
 #include <linux/init.h>
 #include <linux/device.h>
+#include <linux/amba/bus.h>
+#include <linux/gpio.h>
 
 #include <mach/hardware.h>
 #include <mach/irqs.h>
 #include <asm/mach/map.h>
 #include <asm/hardware/vic.h>
 
+/* The 8815 has 4 GPIO blocks, let's register them immediately */
+static struct nmk_gpio_platform_data cpu8815_gpio[] = {
+	{
+		.name = "GPIO-0-31",
+		.first_gpio = 0,
+		.first_irq = NOMADIK_GPIO_TO_IRQ(0),
+		.parent_irq = IRQ_GPIO0,
+	}, {
+		.name = "GPIO-32-63",
+		.first_gpio = 32,
+		.first_irq = NOMADIK_GPIO_TO_IRQ(32),
+		.parent_irq = IRQ_GPIO1,
+	}, {
+		.name = "GPIO-64-95",
+		.first_gpio = 64,
+		.first_irq = NOMADIK_GPIO_TO_IRQ(64),
+		.parent_irq = IRQ_GPIO2,
+	}, {
+		.name = "GPIO-96-127", /* 124..127 not routed to pin */
+		.first_gpio = 96,
+		.first_irq = NOMADIK_GPIO_TO_IRQ(96),
+		.parent_irq = IRQ_GPIO3,
+	}
+};
+
+#define __MEM_4K_RESOURCE(x) \
+	.res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM}
+
+static struct amba_device cpu8815_amba_gpio[] = {
+	{
+		.dev = {
+			.init_name = "gpio0",
+			.platform_data = cpu8815_gpio + 0,
+		},
+		__MEM_4K_RESOURCE(NOMADIK_GPIO0_BASE),
+	}, {
+		.dev = {
+			.init_name = "gpio1",
+			.platform_data = cpu8815_gpio + 1,
+		},
+		__MEM_4K_RESOURCE(NOMADIK_GPIO1_BASE),
+	}, {
+		.dev = {
+			.init_name = "gpio2",
+			.platform_data = cpu8815_gpio + 2,
+		},
+		__MEM_4K_RESOURCE(NOMADIK_GPIO2_BASE),
+	}, {
+		.dev = {
+			.init_name = "gpio3",
+			.platform_data = cpu8815_gpio + 3,
+		},
+		__MEM_4K_RESOURCE(NOMADIK_GPIO3_BASE),
+	},
+};
+
+static struct amba_device *amba_devs[] __initdata = {
+	cpu8815_amba_gpio + 0,
+	cpu8815_amba_gpio + 1,
+	cpu8815_amba_gpio + 2,
+	cpu8815_amba_gpio + 3,
+};
+
+static int __init cpu8815_init(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
+		amba_device_register(amba_devs[i], &iomem_resource);
+	return 0;
+}
+arch_initcall(cpu8815_init);
+
 /* All SoC devices live in the same area (see hardware.h) */
 static struct map_desc nomadik_io_desc[] __initdata = {
 	{
diff --git a/arch/arm/mach-nomadik/gpio.c b/arch/arm/mach-nomadik/gpio.c
new file mode 100644
index 00000000000..9a09b2791e0
--- /dev/null
+++ b/arch/arm/mach-nomadik/gpio.c
@@ -0,0 +1,396 @@
+/*
+ * Generic GPIO driver for logic cells found in the Nomadik SoC
+ *
+ * Copyright (C) 2008,2009 STMicroelectronics
+ * Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it>
+ *   Rewritten based on work by Prafulla WADASKAR <prafulla.wadaskar@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/amba/bus.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/gpio.h>
+
+/*
+ * The GPIO module in the Nomadik family of Systems-on-Chip is an
+ * AMBA device, managing 32 pins and alternate functions.  The logic block
+ * is currently only used in the Nomadik.
+ *
+ * Symbols in this file are called "nmk_gpio" for "nomadik gpio"
+ */
+
+#define NMK_GPIO_PER_CHIP 32
+struct nmk_gpio_chip {
+	struct gpio_chip chip;
+	void __iomem *addr;
+	unsigned int parent_irq;
+	spinlock_t *lock;
+	/* Keep track of configured edges */
+	u32 edge_rising;
+	u32 edge_falling;
+};
+
+/* Mode functions */
+int nmk_gpio_set_mode(int gpio, int gpio_mode)
+{
+	struct nmk_gpio_chip *nmk_chip;
+	unsigned long flags;
+	u32 afunc, bfunc, bit;
+
+	nmk_chip = get_irq_chip_data(NOMADIK_GPIO_TO_IRQ(gpio));
+	if (!nmk_chip)
+		return -EINVAL;
+
+	bit = 1 << (gpio - nmk_chip->chip.base);
+
+	spin_lock_irqsave(&nmk_chip->lock, flags);
+	afunc = readl(nmk_chip->addr + NMK_GPIO_AFSLA) & ~bit;
+	bfunc = readl(nmk_chip->addr + NMK_GPIO_AFSLB) & ~bit;
+	if (gpio_mode & NMK_GPIO_ALT_A)
+		afunc |= bit;
+	if (gpio_mode & NMK_GPIO_ALT_B)
+		bfunc |= bit;
+	writel(afunc, nmk_chip->addr + NMK_GPIO_AFSLA);
+	writel(bfunc, nmk_chip->addr + NMK_GPIO_AFSLB);
+	spin_unlock_irqrestore(&nmk_chip->lock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL(nmk_gpio_set_mode);
+
+int nmk_gpio_get_mode(int gpio)
+{
+	struct nmk_gpio_chip *nmk_chip;
+	u32 afunc, bfunc, bit;
+
+	nmk_chip = get_irq_chip_data(NOMADIK_GPIO_TO_IRQ(gpio));
+	if (!nmk_chip)
+		return -EINVAL;
+
+	bit = 1 << (gpio - nmk_chip->chip.base);
+
+	afunc = readl(nmk_chip->addr + NMK_GPIO_AFSLA) & bit;
+	bfunc = readl(nmk_chip->addr + NMK_GPIO_AFSLB) & bit;
+
+	return (afunc ? NMK_GPIO_ALT_A : 0) | (bfunc ? NMK_GPIO_ALT_B : 0);
+}
+EXPORT_SYMBOL(nmk_gpio_get_mode);
+
+
+/* IRQ functions */
+static inline int nmk_gpio_get_bitmask(int gpio)
+{
+	return 1 << (gpio % 32);
+}
+
+static void nmk_gpio_irq_ack(unsigned int irq)
+{
+	int gpio;
+	struct nmk_gpio_chip *nmk_chip;
+
+	gpio = NOMADIK_IRQ_TO_GPIO(irq);
+	nmk_chip = get_irq_chip_data(irq);
+	if (!nmk_chip)
+		return;
+	writel(nmk_gpio_get_bitmask(gpio), nmk_chip->addr + NMK_GPIO_IC);
+}
+
+static void nmk_gpio_irq_mask(unsigned int irq)
+{
+	int gpio;
+	struct nmk_gpio_chip *nmk_chip;
+	unsigned long flags;
+	u32 bitmask, reg;
+
+	gpio = NOMADIK_IRQ_TO_GPIO(irq);
+	nmk_chip = get_irq_chip_data(irq);
+	bitmask = nmk_gpio_get_bitmask(gpio);
+	if (!nmk_chip)
+		return;
+
+	/* we must individually clear the two edges */
+	spin_lock_irqsave(&nmk_chip->lock, flags);
+	if (nmk_chip->edge_rising & bitmask) {
+		reg = readl(nmk_chip->addr + NMK_GPIO_RWIMSC);
+		reg &= ~bitmask;
+		writel(reg, nmk_chip->addr + NMK_GPIO_RWIMSC);
+	}
+	if (nmk_chip->edge_falling & bitmask) {
+		reg = readl(nmk_chip->addr + NMK_GPIO_FWIMSC);
+		reg &= ~bitmask;
+		writel(reg, nmk_chip->addr + NMK_GPIO_FWIMSC);
+	}
+	spin_unlock_irqrestore(&nmk_chip->lock, flags);
+};
+
+static void nmk_gpio_irq_unmask(unsigned int irq)
+{
+	int gpio;
+	struct nmk_gpio_chip *nmk_chip;
+	unsigned long flags;
+	u32 bitmask, reg;
+
+	gpio = NOMADIK_IRQ_TO_GPIO(irq);
+	nmk_chip = get_irq_chip_data(irq);
+	bitmask = nmk_gpio_get_bitmask(gpio);
+	if (!nmk_chip)
+		return;
+
+	/* we must individually set the two edges */
+	spin_lock_irqsave(&nmk_chip->lock, flags);
+	if (nmk_chip->edge_rising & bitmask) {
+		reg = readl(nmk_chip->addr + NMK_GPIO_RWIMSC);
+		reg |= bitmask;
+		writel(reg, nmk_chip->addr + NMK_GPIO_RWIMSC);
+	}
+	if (nmk_chip->edge_falling & bitmask) {
+		reg = readl(nmk_chip->addr + NMK_GPIO_FWIMSC);
+		reg |= bitmask;
+		writel(reg, nmk_chip->addr + NMK_GPIO_FWIMSC);
+	}
+	spin_unlock_irqrestore(&nmk_chip->lock, flags);
+}
+
+static int nmk_gpio_irq_set_type(unsigned int irq, unsigned int type)
+{
+	int gpio;
+	struct nmk_gpio_chip *nmk_chip;
+	unsigned long flags;
+	u32 bitmask;
+
+	gpio = NOMADIK_IRQ_TO_GPIO(irq);
+	nmk_chip = get_irq_chip_data(irq);
+	bitmask = nmk_gpio_get_bitmask(gpio);
+	if (!nmk_chip)
+		return -EINVAL;
+
+	if (type & IRQ_TYPE_LEVEL_HIGH)
+		return -EINVAL;
+	if (type & IRQ_TYPE_LEVEL_LOW)
+		return -EINVAL;
+
+	spin_lock_irqsave(&nmk_chip->lock, flags);
+
+	nmk_chip->edge_rising &= ~bitmask;
+	if (type & IRQ_TYPE_EDGE_RISING)
+		nmk_chip->edge_rising |= bitmask;
+	writel(nmk_chip->edge_rising, nmk_chip->addr + NMK_GPIO_RIMSC);
+
+	nmk_chip->edge_falling &= ~bitmask;
+	if (type & IRQ_TYPE_EDGE_FALLING)
+		nmk_chip->edge_falling |= bitmask;
+	writel(nmk_chip->edge_falling, nmk_chip->addr + NMK_GPIO_FIMSC);
+
+	spin_unlock_irqrestore(&nmk_chip->lock, flags);
+
+	nmk_gpio_irq_unmask(irq);
+
+	return 0;
+}
+
+static struct irq_chip nmk_gpio_irq_chip = {
+	.name		= "Nomadik-GPIO",
+	.ack		= nmk_gpio_irq_ack,
+	.mask		= nmk_gpio_irq_mask,
+	.unmask		= nmk_gpio_irq_unmask,
+	.set_type	= nmk_gpio_irq_set_type,
+};
+
+static void nmk_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+	struct nmk_gpio_chip *nmk_chip;
+	struct irq_chip *host_chip;
+	unsigned int gpio_irq;
+	u32 pending;
+	unsigned int first_irq;
+
+	nmk_chip = get_irq_data(irq);
+	first_irq = NOMADIK_GPIO_TO_IRQ(nmk_chip->chip.base);
+	while ( (pending = readl(nmk_chip->addr + NMK_GPIO_IS)) ) {
+		gpio_irq = first_irq + __ffs(pending);
+		generic_handle_irq(gpio_irq);
+	}
+	if (0) {/* don't ack parent irq, as ack == disable */
+		host_chip = get_irq_chip(irq);
+		host_chip->ack(irq);
+	}
+}
+
+static int nmk_gpio_init_irq(struct nmk_gpio_chip *nmk_chip)
+{
+	unsigned int first_irq;
+	int i;
+
+	first_irq = NOMADIK_GPIO_TO_IRQ(nmk_chip->chip.base);
+	for (i = first_irq; i < first_irq + NMK_GPIO_PER_CHIP; i++) {
+		set_irq_chip(i, &nmk_gpio_irq_chip);
+		set_irq_handler(i, handle_edge_irq);
+		set_irq_flags(i, IRQF_VALID);
+		set_irq_chip_data(i, nmk_chip);
+	}
+	set_irq_chained_handler(nmk_chip->parent_irq, nmk_gpio_irq_handler);
+	set_irq_data(nmk_chip->parent_irq, nmk_chip);
+	return 0;
+}
+
+/* I/O Functions */
+static int nmk_gpio_make_input(struct gpio_chip *chip, unsigned offset)
+{
+	struct nmk_gpio_chip *nmk_chip =
+		container_of(chip, struct nmk_gpio_chip, chip);
+
+	writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRC);
+	return 0;
+}
+
+static int nmk_gpio_make_output(struct gpio_chip *chip, unsigned offset,
+				int val)
+{
+	struct nmk_gpio_chip *nmk_chip =
+		container_of(chip, struct nmk_gpio_chip, chip);
+
+	writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRS);
+	return 0;
+}
+
+static int nmk_gpio_get_input(struct gpio_chip *chip, unsigned offset)
+{
+	struct nmk_gpio_chip *nmk_chip =
+		container_of(chip, struct nmk_gpio_chip, chip);
+	u32 bit = 1 << offset;
+
+	return (readl(nmk_chip->addr + NMK_GPIO_DAT) & bit) != 0;
+}
+
+static void nmk_gpio_set_output(struct gpio_chip *chip, unsigned offset,
+				int val)
+{
+	struct nmk_gpio_chip *nmk_chip =
+		container_of(chip, struct nmk_gpio_chip, chip);
+	u32 bit = 1 << offset;
+
+	if (val)
+		writel(bit, nmk_chip->addr + NMK_GPIO_DATS);
+	else
+		writel(bit, nmk_chip->addr + NMK_GPIO_DATC);
+}
+
+/* This structure is replicated for each GPIO block allocated at probe time */
+static struct gpio_chip nmk_gpio_template = {
+	.direction_input	= nmk_gpio_make_input,
+	.get			= nmk_gpio_get_input,
+	.direction_output	= nmk_gpio_make_output,
+	.set			= nmk_gpio_set_output,
+	.ngpio			= NMK_GPIO_PER_CHIP,
+	.can_sleep		= 0,
+};
+
+static int __init nmk_gpio_probe(struct amba_device *dev, struct amba_id *id)
+{
+	struct nmk_gpio_platform_data *pdata;
+	struct nmk_gpio_chip *nmk_chip;
+	struct gpio_chip *chip;
+	int ret;
+
+	pdata = dev->dev.platform_data;
+	ret = amba_request_regions(dev, pdata->name);
+	if (ret)
+		return ret;
+
+	nmk_chip = kzalloc(sizeof(*nmk_chip), GFP_KERNEL);
+	if (!nmk_chip) {
+		ret = -ENOMEM;
+		goto out_amba;
+	}
+	/*
+	 * The virt address in nmk_chip->addr is in the nomadik register space,
+	 * so we can simply convert the resource address, without remapping
+	 */
+	nmk_chip->addr = io_p2v(dev->res.start);
+	nmk_chip->chip = nmk_gpio_template;
+	nmk_chip->parent_irq = pdata->parent_irq;
+
+	chip = &nmk_chip->chip;
+	chip->base = pdata->first_gpio;
+	chip->label = pdata->name;
+	chip->dev = &dev->dev;
+	chip->owner = THIS_MODULE;
+
+	ret = gpiochip_add(&nmk_chip->chip);
+	if (ret)
+		goto out_free;
+
+	amba_set_drvdata(dev, nmk_chip);
+
+	nmk_gpio_init_irq(nmk_chip);
+
+	dev_info(&dev->dev, "Bits %i-%i at address %p\n",
+		 nmk_chip->chip.base, nmk_chip->chip.base+31, nmk_chip->addr);
+	return 0;
+
+ out_free:
+	kfree(nmk_chip);
+ out_amba:
+	amba_release_regions(dev);
+	dev_err(&dev->dev, "Failure %i for GPIO %i-%i\n", ret,
+		  pdata->first_gpio, pdata->first_gpio+31);
+	return ret;
+}
+
+static int nmk_gpio_remove(struct amba_device *dev)
+{
+	struct nmk_gpio_chip *nmk_chip;
+
+	nmk_chip = amba_get_drvdata(dev);
+	gpiochip_remove(&nmk_chip->chip);
+	kfree(nmk_chip);
+	amba_release_regions(dev);
+	return 0;
+}
+
+
+/* We have 0x1f080060 and 0x1f180060, accept both using the mask */
+static struct amba_id nmk_gpio_ids[] = {
+	{
+		.id	= 0x1f080060,
+		.mask	= 0xffefffff,
+	},
+	{0, 0},
+};
+
+static struct amba_driver nmk_gpio_driver = {
+	.drv = {
+		.owner = THIS_MODULE,
+		.name = "gpio",
+		},
+	.probe = nmk_gpio_probe,
+	.remove = nmk_gpio_remove,
+	.suspend = NULL, /* to be done */
+	.resume = NULL,
+	.id_table = nmk_gpio_ids,
+};
+
+static int __init nmk_gpio_init(void)
+{
+	return amba_driver_register(&nmk_gpio_driver);
+}
+
+arch_initcall(nmk_gpio_init);
+
+MODULE_AUTHOR("Prafulla WADASKAR and Alessandro Rubini");
+MODULE_DESCRIPTION("Nomadik GPIO Driver");
+MODULE_LICENSE("GPL");
+
+
diff --git a/arch/arm/mach-nomadik/include/mach/gpio.h b/arch/arm/mach-nomadik/include/mach/gpio.h
new file mode 100644
index 00000000000..61577c9f9a7
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/gpio.h
@@ -0,0 +1,71 @@
+/*
+ * Structures and registers for GPIO access in the Nomadik SoC
+ *
+ * Copyright (C) 2008 STMicroelectronics
+ *     Author: Prafulla WADASKAR <prafulla.wadaskar@st.com>
+ * Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H
+
+#include <asm-generic/gpio.h>
+
+/*
+ * These currently cause a function call to happen, they may be optimized
+ * if needed by adding cpu-specific defines to identify blocks
+ * (see mach-pxa/include/mach/gpio.h as an example using GPLR etc)
+ */
+#define gpio_get_value  __gpio_get_value
+#define gpio_set_value  __gpio_set_value
+#define gpio_cansleep   __gpio_cansleep
+#define gpio_to_irq     __gpio_to_irq
+
+/*
+ * "nmk_gpio" and "NMK_GPIO" stand for "Nomadik GPIO", leaving
+ * the "gpio" namespace for generic and cross-machine functions
+ */
+
+/* Register in the logic block */
+#define NMK_GPIO_DAT	0x00
+#define NMK_GPIO_DATS	0x04
+#define NMK_GPIO_DATC	0x08
+#define NMK_GPIO_PDIS	0x0c
+#define NMK_GPIO_DIR	0x10
+#define NMK_GPIO_DIRS	0x14
+#define NMK_GPIO_DIRC	0x18
+#define NMK_GPIO_SLPC	0x1c
+#define NMK_GPIO_AFSLA	0x20
+#define NMK_GPIO_AFSLB	0x24
+
+#define NMK_GPIO_RIMSC	0x40
+#define NMK_GPIO_FIMSC	0x44
+#define NMK_GPIO_IS	0x48
+#define NMK_GPIO_IC	0x4c
+#define NMK_GPIO_RWIMSC	0x50
+#define NMK_GPIO_FWIMSC	0x54
+#define NMK_GPIO_WKS	0x58
+
+/* Alternate functions: function C is set in hw by setting both A and B */
+#define NMK_GPIO_ALT_GPIO	0
+#define NMK_GPIO_ALT_A	1
+#define NMK_GPIO_ALT_B	2
+#define NMK_GPIO_ALT_C	(NMK_GPIO_ALT_A | NMK_GPIO_ALT_B)
+
+extern int nmk_gpio_set_mode(int gpio, int gpio_mode);
+extern int nmk_gpio_get_mode(int gpio);
+
+/*
+ * Platform data to register a block: only the initial gpio/irq number.
+ */
+struct nmk_gpio_platform_data {
+	char *name;
+	int first_gpio;
+	int first_irq;
+	int parent_irq;
+};
+
+#endif /* __ASM_ARCH_GPIO_H */
-- 
cgit v1.2.3


From 63796b740b888b396eb0cc78917d755693cc224c Mon Sep 17 00:00:00 2001
From: Alessandro Rubini <rubini@gnudd.com>
Date: Thu, 2 Jul 2009 15:29:22 +0100
Subject: [ARM] 5585/1: nomadik: add gpio-i2c devices

Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-nomadik/Kconfig       |  7 ++++
 arch/arm/mach-nomadik/Makefile      |  3 ++
 arch/arm/mach-nomadik/i2c-8815nhk.c | 65 +++++++++++++++++++++++++++++++++++++
 3 files changed, 75 insertions(+)
 create mode 100644 arch/arm/mach-nomadik/i2c-8815nhk.c

(limited to 'arch')

diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig
index abce2346106..2a02b49c40f 100644
--- a/arch/arm/mach-nomadik/Kconfig
+++ b/arch/arm/mach-nomadik/Kconfig
@@ -11,4 +11,11 @@ endmenu
 config NOMADIK_8815
 	bool
 
+
+config I2C_BITBANG_8815NHK
+	tristate "Driver for bit-bang busses found on the 8815 NHK"
+	depends on I2C && MACH_NOMADIK_8815NHK
+	select I2C_ALGOBIT
+	default y
+
 endif
diff --git a/arch/arm/mach-nomadik/Makefile b/arch/arm/mach-nomadik/Makefile
index 3fc43543e6e..412040982a4 100644
--- a/arch/arm/mach-nomadik/Makefile
+++ b/arch/arm/mach-nomadik/Makefile
@@ -14,3 +14,6 @@ obj-$(CONFIG_NOMADIK_8815) += cpu-8815.o
 
 # Specific board support
 obj-$(CONFIG_MACH_NOMADIK_8815NHK) += board-nhk8815.o
+
+# Nomadik extra devices
+obj-$(CONFIG_I2C_BITBANG_8815NHK) += i2c-8815nhk.o
diff --git a/arch/arm/mach-nomadik/i2c-8815nhk.c b/arch/arm/mach-nomadik/i2c-8815nhk.c
new file mode 100644
index 00000000000..abfe25a08d6
--- /dev/null
+++ b/arch/arm/mach-nomadik/i2c-8815nhk.c
@@ -0,0 +1,65 @@
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+#include <linux/i2c-gpio.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+
+/*
+ * There are two busses in the 8815NHK.
+ * They could, in theory, be driven by the hardware component, but we
+ * use bit-bang through GPIO by now, to keep things simple
+ */
+
+static struct i2c_gpio_platform_data nhk8815_i2c_data0 = {
+	/* keep defaults for timeouts; pins are push-pull bidirectional */
+	.scl_pin = 62,
+	.sda_pin = 63,
+};
+
+static struct i2c_gpio_platform_data nhk8815_i2c_data1 = {
+	/* keep defaults for timeouts; pins are push-pull bidirectional */
+	.scl_pin = 53,
+	.sda_pin = 54,
+};
+
+/* first bus: GPIO XX and YY */
+static struct platform_device nhk8815_i2c_dev0 = {
+	.name	= "i2c-gpio",
+	.id	= 0,
+	.dev	= {
+		.platform_data = &nhk8815_i2c_data0,
+	},
+};
+/* second bus: GPIO XX and YY */
+static struct platform_device nhk8815_i2c_dev1 = {
+	.name	= "i2c-gpio",
+	.id	= 1,
+	.dev	= {
+		.platform_data = &nhk8815_i2c_data1,
+	},
+};
+
+static int __init nhk8815_i2c_init(void)
+{
+	nmk_gpio_set_mode(nhk8815_i2c_data0.scl_pin, NMK_GPIO_ALT_GPIO);
+	nmk_gpio_set_mode(nhk8815_i2c_data0.sda_pin, NMK_GPIO_ALT_GPIO);
+	platform_device_register(&nhk8815_i2c_dev0);
+
+	nmk_gpio_set_mode(nhk8815_i2c_data1.scl_pin, NMK_GPIO_ALT_GPIO);
+	nmk_gpio_set_mode(nhk8815_i2c_data1.sda_pin, NMK_GPIO_ALT_GPIO);
+	platform_device_register(&nhk8815_i2c_dev1);
+
+	return 0;
+}
+
+static void __exit nhk8815_i2c_exit(void)
+{
+	platform_device_unregister(&nhk8815_i2c_dev0);
+	platform_device_unregister(&nhk8815_i2c_dev1);
+	return;
+}
+
+module_init(nhk8815_i2c_init);
+module_exit(nhk8815_i2c_exit);
-- 
cgit v1.2.3


From 725b1f9d86822246e5a1237bf97d2783857d8a3a Mon Sep 17 00:00:00 2001
From: Alessandro Rubini <rubini@gnudd.com>
Date: Thu, 2 Jul 2009 15:29:32 +0100
Subject: [ARM] 5586/1: nomadik board: added ethernet

Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-nomadik/board-nhk8815.c | 38 ++++++++++++++++++++++++++++++++++-
 1 file changed, 37 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
index eebca614d36..79bdea943eb 100644
--- a/arch/arm/mach-nomadik/board-nhk8815.c
+++ b/arch/arm/mach-nomadik/board-nhk8815.c
@@ -14,6 +14,8 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/amba/bus.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/irq.h>
@@ -45,8 +47,42 @@ static struct clk nhk8815_clk_48 = {
 	.rate = 48*1000*1000,
 };
 
+static struct resource nhk8815_eth_resources[] = {
+	{
+		.name = "smc91x-regs",
+		.start = 0x34000000 + 0x300,
+		.end = 0x34000000 + SZ_64K - 1,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = NOMADIK_GPIO_TO_IRQ(115),
+		.end = NOMADIK_GPIO_TO_IRQ(115),
+		.flags = IORESOURCE_IRQ | IRQF_TRIGGER_RISING,
+	}
+};
+
+static struct platform_device nhk8815_eth_device = {
+	.name = "smc91x",
+	.resource = nhk8815_eth_resources,
+	.num_resources = ARRAY_SIZE(nhk8815_eth_resources),
+};
+
+static int __init nhk8815_eth_init(void)
+{
+	int gpio_nr = 115; /* hardwired in the board */
+	int err;
+
+	err = gpio_request(gpio_nr, "eth_irq");
+	if (!err) err = nmk_gpio_set_mode(gpio_nr, NMK_GPIO_ALT_GPIO);
+	if (!err) err = gpio_direction_input(gpio_nr);
+	if (err)
+		pr_err("Error %i in %s\n", err, __func__);
+	return err;
+}
+device_initcall(nhk8815_eth_init);
+
 static struct platform_device *nhk8815_platform_devices[] __initdata = {
-	/* currently empty, will add keypad, touchscreen etc */
+	&nhk8815_eth_device,
+	/* will add more devices */
 };
 
 static void __init nhk8815_platform_init(void)
-- 
cgit v1.2.3


From 0b260fd4b0eb7c90f9258bfa6317ae553319b5da Mon Sep 17 00:00:00 2001
From: Alessandro Rubini <rubini@gnudd.com>
Date: Thu, 2 Jul 2009 15:29:43 +0100
Subject: [ARM] 5587/1: nomadik: add l2cc

Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-nomadik/cpu-8815.c | 8 +++++++-
 arch/arm/mm/Kconfig              | 2 +-
 2 files changed, 8 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c
index 9917a9abdb5..f93c5963419 100644
--- a/arch/arm/mach-nomadik/cpu-8815.c
+++ b/arch/arm/mach-nomadik/cpu-8815.c
@@ -27,6 +27,9 @@
 #include <asm/mach/map.h>
 #include <asm/hardware/vic.h>
 
+#include <asm/cacheflush.h>
+#include <asm/hardware/cache-l2x0.h>
+
 /* The 8815 has 4 GPIO blocks, let's register them immediately */
 static struct nmk_gpio_platform_data cpu8815_gpio[] = {
 	{
@@ -125,9 +128,12 @@ void __init cpu8815_init_irq(void)
 
 /*
  * This function is called from the board init ("init_machine").
- * Currently nothing is done as we can't register amba devs so early.
  */
  void __init cpu8815_platform_init(void)
 {
+#ifdef CONFIG_CACHE_L2X0
+	/* At full speed latency must be >=2, so 0x249 in low bits */
+	l2x0_init(io_p2v(NOMADIK_L2CC_BASE), 0x00730249, 0xfe000fff);
+#endif
 	 return;
 }
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 83c025e72ce..5fe595aeba6 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -758,7 +758,7 @@ config CACHE_FEROCEON_L2_WRITETHROUGH
 config CACHE_L2X0
 	bool "Enable the L2x0 outer cache controller"
 	depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || \
-		   REALVIEW_EB_A9MP || ARCH_MX35 || ARCH_MX31 || MACH_REALVIEW_PBX
+		   REALVIEW_EB_A9MP || ARCH_MX35 || ARCH_MX31 || MACH_REALVIEW_PBX || ARCH_NOMADIK
 	default y
 	select OUTER_CACHE
 	help
-- 
cgit v1.2.3


From c2b455474e4c6bc8bab6506e2a08dbd5ad50d74d Mon Sep 17 00:00:00 2001
From: Alessandro Rubini <rubini@gnudd.com>
Date: Thu, 2 Jul 2009 15:29:53 +0100
Subject: [ARM] 5588/1: nomadik: add defconfig for nhk8815

Signed-off-by: Alessandro Rubini <rubini@unipv.it>
Acked-by: Andrea Gallo <andrea.gallo@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/configs/nhk8815_defconfig | 1316 ++++++++++++++++++++++++++++++++++++
 1 file changed, 1316 insertions(+)
 create mode 100644 arch/arm/configs/nhk8815_defconfig

(limited to 'arch')

diff --git a/arch/arm/configs/nhk8815_defconfig b/arch/arm/configs/nhk8815_defconfig
new file mode 100644
index 00000000000..9bb45b932f0
--- /dev/null
+++ b/arch/arm/configs/nhk8815_defconfig
@@ -0,0 +1,1316 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30
+# Tue Jun 23 22:57:16 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Performance Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+CONFIG_ARCH_NOMADIK=y
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Nomadik boards
+#
+CONFIG_MACH_NOMADIK_8815NHK=y
+CONFIG_NOMADIK_8815=y
+CONFIG_I2C_BITBANG_8815NHK=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+CONFIG_OUTER_CACHE=y
+CONFIG_CACHE_L2X0=y
+CONFIG_ARM_VIC=y
+CONFIG_ARM_VIC_NR=2
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+CONFIG_ARM_AMBA=y
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_MULTIPLE_TABLES is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+# CONFIG_IP_ROUTE_VERBOSE is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+CONFIG_NET_IPIP=y
+CONFIG_NET_IPGRE=y
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+# CONFIG_IP_PIMSM_V1 is not set
+# CONFIG_IP_PIMSM_V2 is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+# CONFIG_BT_HCIUART_LL is not set
+CONFIG_BT_HCIVHCI=m
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_TESTS=m
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+CONFIG_MTD_NAND_NOMADIK=y
+CONFIG_MTD_ONENAND=y
+CONFIG_MTD_ONENAND_VERIFY_WRITE=y
+CONFIG_MTD_ONENAND_GENERIC=y
+# CONFIG_MTD_ONENAND_OTP is not set
+# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
+# CONFIG_MTD_ONENAND_SIM is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=y
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=y
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+CONFIG_NETCONSOLE=m
+# CONFIG_NETCONSOLE_DYNAMIC is not set
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+CONFIG_INPUT_MOUSE=y
+# CONFIG_MOUSE_PS2 is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_AMBA_PL010 is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_GPIO=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_DEBUG_GPIO=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_PL061 is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_WACOM is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_PL030 is not set
+# CONFIG_RTC_DRV_PL031 is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=y
+# CONFIG_CUSE is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+CONFIG_CIFS_WEAK_PW_HASH=y
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=y
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=y
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
-- 
cgit v1.2.3


From 788e5abc5441e9046dd91c995c6f1f75bbd144bf Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Sat, 4 Jul 2009 08:10:58 +0900
Subject: percpu: drop @unit_size from embed first chunk allocator

The only extra feature @unit_size provides is making dead space at the
end of the first chunk which doesn't have any valid usecase.  Drop the
parameter.  This will increase consistency with generalized 4k
allocator.

James Bottomley spotted missing conversion for the default
setup_per_cpu_areas() which caused build breakage on all arcsh which
use it.

[ Impact: drop unused code path ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/setup_percpu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index 29a3eef7cf4..14728206fb5 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -342,7 +342,7 @@ static ssize_t __init setup_pcpu_embed(size_t static_size, bool chosen)
 		return -EINVAL;
 
 	return pcpu_embed_first_chunk(static_size, PERCPU_FIRST_CHUNK_RESERVE,
-				      reserve - PERCPU_FIRST_CHUNK_RESERVE, -1);
+				      reserve - PERCPU_FIRST_CHUNK_RESERVE);
 }
 
 /*
-- 
cgit v1.2.3


From d4b95f80399471e4bce5e992700ff7f06ef91f6a Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Sat, 4 Jul 2009 08:10:59 +0900
Subject: x86,percpu: generalize 4k first chunk allocator

Generalize and move x86 setup_pcpu_4k() into pcpu_4k_first_chunk().
setup_pcpu_4k() now is a simple wrapper around the generalized
version.  Other than taking size parameters and using arch supplied
callbacks to allocate/free memory, pcpu_4k_first_chunk() is identical
to the original implementation.

This simplifies arch code and will help converting more archs to
dynamic percpu allocator.

While at it, s/pcpu_populate_pte_fn_t/pcpu_fc_populate_pte_fn_t/ for
consistency.

[ Impact: code reorganization and generalization ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/setup_percpu.c | 78 ++++++++++--------------------------------
 1 file changed, 19 insertions(+), 59 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index 14728206fb5..ab896b31e80 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -123,6 +123,19 @@ static void * __init pcpu_alloc_bootmem(unsigned int cpu, unsigned long size,
 #endif
 }
 
+/*
+ * Helpers for first chunk memory allocation
+ */
+static void * __init pcpu_fc_alloc(unsigned int cpu, size_t size)
+{
+	return pcpu_alloc_bootmem(cpu, size, size);
+}
+
+static void __init pcpu_fc_free(void *ptr, size_t size)
+{
+	free_bootmem(__pa(ptr), size);
+}
+
 /*
  * Large page remap allocator
  *
@@ -346,22 +359,11 @@ static ssize_t __init setup_pcpu_embed(size_t static_size, bool chosen)
 }
 
 /*
- * 4k page allocator
+ * 4k allocator
  *
- * This is the basic allocator.  Static percpu area is allocated
- * page-by-page and most of initialization is done by the generic
- * setup function.
+ * Boring fallback 4k allocator.  This allocator puts more pressure on
+ * PTE TLBs but other than that behaves nicely on both UMA and NUMA.
  */
-static struct page **pcpu4k_pages __initdata;
-static int pcpu4k_nr_static_pages __initdata;
-
-static struct page * __init pcpu4k_get_page(unsigned int cpu, int pageno)
-{
-	if (pageno < pcpu4k_nr_static_pages)
-		return pcpu4k_pages[cpu * pcpu4k_nr_static_pages + pageno];
-	return NULL;
-}
-
 static void __init pcpu4k_populate_pte(unsigned long addr)
 {
 	populate_extra_pte(addr);
@@ -369,51 +371,9 @@ static void __init pcpu4k_populate_pte(unsigned long addr)
 
 static ssize_t __init setup_pcpu_4k(size_t static_size)
 {
-	size_t pages_size;
-	unsigned int cpu;
-	int i, j;
-	ssize_t ret;
-
-	pcpu4k_nr_static_pages = PFN_UP(static_size);
-
-	/* unaligned allocations can't be freed, round up to page size */
-	pages_size = PFN_ALIGN(pcpu4k_nr_static_pages * num_possible_cpus()
-			       * sizeof(pcpu4k_pages[0]));
-	pcpu4k_pages = alloc_bootmem(pages_size);
-
-	/* allocate and copy */
-	j = 0;
-	for_each_possible_cpu(cpu)
-		for (i = 0; i < pcpu4k_nr_static_pages; i++) {
-			void *ptr;
-
-			ptr = pcpu_alloc_bootmem(cpu, PAGE_SIZE, PAGE_SIZE);
-			if (!ptr) {
-				pr_warning("PERCPU: failed to allocate "
-					   "4k page for cpu%u\n", cpu);
-				goto enomem;
-			}
-
-			memcpy(ptr, __per_cpu_load + i * PAGE_SIZE, PAGE_SIZE);
-			pcpu4k_pages[j++] = virt_to_page(ptr);
-		}
-
-	/* we're ready, commit */
-	pr_info("PERCPU: Allocated %d 4k pages, static data %zu bytes\n",
-		pcpu4k_nr_static_pages, static_size);
-
-	ret = pcpu_setup_first_chunk(pcpu4k_get_page, static_size,
-				     PERCPU_FIRST_CHUNK_RESERVE, -1,
-				     -1, NULL, pcpu4k_populate_pte);
-	goto out_free_ar;
-
-enomem:
-	while (--j >= 0)
-		free_bootmem(__pa(page_address(pcpu4k_pages[j])), PAGE_SIZE);
-	ret = -ENOMEM;
-out_free_ar:
-	free_bootmem(__pa(pcpu4k_pages), pages_size);
-	return ret;
+	return pcpu_4k_first_chunk(static_size, PERCPU_FIRST_CHUNK_RESERVE,
+				   pcpu_fc_alloc, pcpu_fc_free,
+				   pcpu4k_populate_pte);
 }
 
 /* for explicit first chunk allocator selection */
-- 
cgit v1.2.3


From 8c4bfc6e8801616ab2e01c38140b2159b388d2ff Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Sat, 4 Jul 2009 08:10:59 +0900
Subject: x86,percpu: generalize lpage first chunk allocator

Generalize and move x86 setup_pcpu_lpage() into
pcpu_lpage_first_chunk().  setup_pcpu_lpage() now is a simple wrapper
around the generalized version.  Other than taking size parameters and
using arch supplied callbacks to allocate/free/map memory,
pcpu_lpage_first_chunk() is identical to the original implementation.

This simplifies arch code and will help converting more archs to
dynamic percpu allocator.

While at it, factor out pcpu_calc_fc_sizes() which is common to
pcpu_embed_first_chunk() and pcpu_lpage_first_chunk().

[ Impact: code reorganization and generalization ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/percpu.h  |   9 ---
 arch/x86/kernel/setup_percpu.c | 169 +++--------------------------------------
 arch/x86/mm/pageattr.c         |   1 +
 3 files changed, 12 insertions(+), 167 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/percpu.h b/arch/x86/include/asm/percpu.h
index 103f1ddb0d8..a18c038a307 100644
--- a/arch/x86/include/asm/percpu.h
+++ b/arch/x86/include/asm/percpu.h
@@ -156,15 +156,6 @@ do {							\
 /* We can use this directly for local CPU (faster). */
 DECLARE_PER_CPU(unsigned long, this_cpu_off);
 
-#ifdef CONFIG_NEED_MULTIPLE_NODES
-void *pcpu_lpage_remapped(void *kaddr);
-#else
-static inline void *pcpu_lpage_remapped(void *kaddr)
-{
-	return NULL;
-}
-#endif
-
 #endif /* !__ASSEMBLY__ */
 
 #ifdef CONFIG_SMP
diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index ab896b31e80..4f2e0ac9130 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -137,44 +137,21 @@ static void __init pcpu_fc_free(void *ptr, size_t size)
 }
 
 /*
- * Large page remap allocator
- *
- * This allocator uses PMD page as unit.  A PMD page is allocated for
- * each cpu and each is remapped into vmalloc area using PMD mapping.
- * As PMD page is quite large, only part of it is used for the first
- * chunk.  Unused part is returned to the bootmem allocator.
- *
- * So, the PMD pages are mapped twice - once to the physical mapping
- * and to the vmalloc area for the first percpu chunk.  The double
- * mapping does add one more PMD TLB entry pressure but still is much
- * better than only using 4k mappings while still being NUMA friendly.
+ * Large page remapping allocator
  */
 #ifdef CONFIG_NEED_MULTIPLE_NODES
-struct pcpul_ent {
-	unsigned int	cpu;
-	void		*ptr;
-};
-
-static size_t pcpul_size;
-static struct pcpul_ent *pcpul_map;
-static struct vm_struct pcpul_vm;
-
-static struct page * __init pcpul_get_page(unsigned int cpu, int pageno)
+static void __init pcpul_map(void *ptr, size_t size, void *addr)
 {
-	size_t off = (size_t)pageno << PAGE_SHIFT;
+	pmd_t *pmd, pmd_v;
 
-	if (off >= pcpul_size)
-		return NULL;
-
-	return virt_to_page(pcpul_map[cpu].ptr + off);
+	pmd = populate_extra_pmd((unsigned long)addr);
+	pmd_v = pfn_pmd(page_to_pfn(virt_to_page(ptr)), PAGE_KERNEL_LARGE);
+	set_pmd(pmd, pmd_v);
 }
 
 static ssize_t __init setup_pcpu_lpage(size_t static_size, bool chosen)
 {
-	size_t map_size, dyn_size;
-	unsigned int cpu;
-	int i, j;
-	ssize_t ret;
+	size_t reserve = PERCPU_MODULE_RESERVE + PERCPU_DYNAMIC_RESERVE;
 
 	if (!chosen) {
 		size_t vm_size = VMALLOC_END - VMALLOC_START;
@@ -198,134 +175,10 @@ static ssize_t __init setup_pcpu_lpage(size_t static_size, bool chosen)
 		return -EINVAL;
 	}
 
-	/*
-	 * Currently supports only single page.  Supporting multiple
-	 * pages won't be too difficult if it ever becomes necessary.
-	 */
-	pcpul_size = PFN_ALIGN(static_size + PERCPU_MODULE_RESERVE +
-			       PERCPU_DYNAMIC_RESERVE);
-	if (pcpul_size > PMD_SIZE) {
-		pr_warning("PERCPU: static data is larger than large page, "
-			   "can't use large page\n");
-		return -EINVAL;
-	}
-	dyn_size = pcpul_size - static_size - PERCPU_FIRST_CHUNK_RESERVE;
-
-	/* allocate pointer array and alloc large pages */
-	map_size = PFN_ALIGN(num_possible_cpus() * sizeof(pcpul_map[0]));
-	pcpul_map = alloc_bootmem(map_size);
-
-	for_each_possible_cpu(cpu) {
-		pcpul_map[cpu].cpu = cpu;
-		pcpul_map[cpu].ptr = pcpu_alloc_bootmem(cpu, PMD_SIZE,
-							PMD_SIZE);
-		if (!pcpul_map[cpu].ptr) {
-			pr_warning("PERCPU: failed to allocate large page "
-				   "for cpu%u\n", cpu);
-			goto enomem;
-		}
-
-		/*
-		 * Only use pcpul_size bytes and give back the rest.
-		 *
-		 * Ingo: The 2MB up-rounding bootmem is needed to make
-		 * sure the partial 2MB page is still fully RAM - it's
-		 * not well-specified to have a PAT-incompatible area
-		 * (unmapped RAM, device memory, etc.) in that hole.
-		 */
-		free_bootmem(__pa(pcpul_map[cpu].ptr + pcpul_size),
-			     PMD_SIZE - pcpul_size);
-
-		memcpy(pcpul_map[cpu].ptr, __per_cpu_load, static_size);
-	}
-
-	/* allocate address and map */
-	pcpul_vm.flags = VM_ALLOC;
-	pcpul_vm.size = num_possible_cpus() * PMD_SIZE;
-	vm_area_register_early(&pcpul_vm, PMD_SIZE);
-
-	for_each_possible_cpu(cpu) {
-		pmd_t *pmd, pmd_v;
-
-		pmd = populate_extra_pmd((unsigned long)pcpul_vm.addr +
-					 cpu * PMD_SIZE);
-		pmd_v = pfn_pmd(page_to_pfn(virt_to_page(pcpul_map[cpu].ptr)),
-				PAGE_KERNEL_LARGE);
-		set_pmd(pmd, pmd_v);
-	}
-
-	/* we're ready, commit */
-	pr_info("PERCPU: Remapped at %p with large pages, static data "
-		"%zu bytes\n", pcpul_vm.addr, static_size);
-
-	ret = pcpu_setup_first_chunk(pcpul_get_page, static_size,
-				     PERCPU_FIRST_CHUNK_RESERVE, dyn_size,
-				     PMD_SIZE, pcpul_vm.addr, NULL);
-
-	/* sort pcpul_map array for pcpu_lpage_remapped() */
-	for (i = 0; i < num_possible_cpus() - 1; i++)
-		for (j = i + 1; j < num_possible_cpus(); j++)
-			if (pcpul_map[i].ptr > pcpul_map[j].ptr) {
-				struct pcpul_ent tmp = pcpul_map[i];
-				pcpul_map[i] = pcpul_map[j];
-				pcpul_map[j] = tmp;
-			}
-
-	return ret;
-
-enomem:
-	for_each_possible_cpu(cpu)
-		if (pcpul_map[cpu].ptr)
-			free_bootmem(__pa(pcpul_map[cpu].ptr), pcpul_size);
-	free_bootmem(__pa(pcpul_map), map_size);
-	return -ENOMEM;
-}
-
-/**
- * pcpu_lpage_remapped - determine whether a kaddr is in pcpul recycled area
- * @kaddr: the kernel address in question
- *
- * Determine whether @kaddr falls in the pcpul recycled area.  This is
- * used by pageattr to detect VM aliases and break up the pcpu PMD
- * mapping such that the same physical page is not mapped under
- * different attributes.
- *
- * The recycled area is always at the tail of a partially used PMD
- * page.
- *
- * RETURNS:
- * Address of corresponding remapped pcpu address if match is found;
- * otherwise, NULL.
- */
-void *pcpu_lpage_remapped(void *kaddr)
-{
-	void *pmd_addr = (void *)((unsigned long)kaddr & PMD_MASK);
-	unsigned long offset = (unsigned long)kaddr & ~PMD_MASK;
-	int left = 0, right = num_possible_cpus() - 1;
-	int pos;
-
-	/* pcpul in use at all? */
-	if (!pcpul_map)
-		return NULL;
-
-	/* okay, perform binary search */
-	while (left <= right) {
-		pos = (left + right) / 2;
-
-		if (pcpul_map[pos].ptr < pmd_addr)
-			left = pos + 1;
-		else if (pcpul_map[pos].ptr > pmd_addr)
-			right = pos - 1;
-		else {
-			/* it shouldn't be in the area for the first chunk */
-			WARN_ON(offset < pcpul_size);
-
-			return pcpul_vm.addr +
-				pcpul_map[pos].cpu * PMD_SIZE + offset;
-		}
-	}
-
-	return NULL;
+	return pcpu_lpage_first_chunk(static_size, PERCPU_FIRST_CHUNK_RESERVE,
+				      reserve - PERCPU_FIRST_CHUNK_RESERVE,
+				      PMD_SIZE,
+				      pcpu_fc_alloc, pcpu_fc_free, pcpul_map);
 }
 #else
 static ssize_t __init setup_pcpu_lpage(size_t static_size, bool chosen)
diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index 1b734d7a896..c106f785242 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -12,6 +12,7 @@
 #include <linux/seq_file.h>
 #include <linux/debugfs.h>
 #include <linux/pfn.h>
+#include <linux/percpu.h>
 
 #include <asm/e820.h>
 #include <asm/processor.h>
-- 
cgit v1.2.3


From 38a6be525460f52ac6f2de1c3f73c5615a8853cd Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Sat, 4 Jul 2009 08:10:59 +0900
Subject: percpu: simplify pcpu_setup_first_chunk()

Now that all first chunk allocator helpers allocate and map the first
chunk themselves, there's no need to have optional default alloc/map
in pcpu_setup_first_chunk().  Drop @populate_pte_fn and only leave
@dyn_size optional and make all other params mandatory.

This makes it much easier to follow what pcpu_setup_first_chunk() is
doing and what actual differences tweaking each parameter results in.

[ Impact: drop unused code path ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
---
 arch/sparc/kernel/smp_64.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/sparc/kernel/smp_64.c b/arch/sparc/kernel/smp_64.c
index fa44eaf8d89..ccad7b20ae7 100644
--- a/arch/sparc/kernel/smp_64.c
+++ b/arch/sparc/kernel/smp_64.c
@@ -1528,7 +1528,7 @@ void __init setup_per_cpu_areas(void)
 
 	pcpu_unit_size = pcpu_setup_first_chunk(pcpur_get_page, static_size,
 						PERCPU_MODULE_RESERVE, dyn_size,
-						PCPU_CHUNK_SIZE, vm.addr, NULL);
+						PCPU_CHUNK_SIZE, vm.addr);
 
 	free_bootmem(__pa(pcpur_ptrs), ptrs_size);
 
-- 
cgit v1.2.3


From ce3141a277ff6cc37e51008b8888dc2cb7456ef1 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Sat, 4 Jul 2009 08:11:00 +0900
Subject: percpu: drop pcpu_chunk->page[]

percpu core doesn't need to tack all the allocated pages.  It needs to
know whether certain pages are populated and a way to reverse map
address to page when freeing.  This patch drops pcpu_chunk->page[] and
use populated bitmap and vmalloc_to_page() lookup instead.  Using
vmalloc_to_page() exclusively is also possible but complicates first
chunk handling, inflates cache footprint and prevents non-standard
memory allocation for percpu memory.

pcpu_chunk->page[] was used to track each page's allocation and
allowed asymmetric population which happens during failure path;
however, with single bitmap for all units, this is no longer possible.
Bite the bullet and rewrite (de)populate functions so that things are
done in clearly separated steps such that asymmetric population
doesn't happen.  This makes the (de)population process much more
modular and will also ease implementing non-standard memory usage in
the future (e.g. large pages).

This makes @get_page_fn parameter to pcpu_setup_first_chunk()
unnecessary.  The parameter is dropped and all first chunk helpers are
updated accordingly.  Please note that despite the volume most changes
to first chunk helpers are symbol renames for variables which don't
need to be referenced outside of the helper anymore.

This change reduces memory usage and cache footprint of pcpu_chunk.
Now only #unit_pages bits are necessary per chunk.

[ Impact: reduced memory usage and cache footprint for bookkeeping ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Miller <davem@davemloft.net>
---
 arch/sparc/kernel/smp_64.c | 42 +++++++++++++++---------------------------
 1 file changed, 15 insertions(+), 27 deletions(-)

(limited to 'arch')

diff --git a/arch/sparc/kernel/smp_64.c b/arch/sparc/kernel/smp_64.c
index ccad7b20ae7..f2f22ee97a7 100644
--- a/arch/sparc/kernel/smp_64.c
+++ b/arch/sparc/kernel/smp_64.c
@@ -1415,19 +1415,6 @@ static void * __init pcpu_alloc_bootmem(unsigned int cpu, unsigned long size,
 #endif
 }
 
-static size_t pcpur_size __initdata;
-static void **pcpur_ptrs __initdata;
-
-static struct page * __init pcpur_get_page(unsigned int cpu, int pageno)
-{
-	size_t off = (size_t)pageno << PAGE_SHIFT;
-
-	if (off >= pcpur_size)
-		return NULL;
-
-	return virt_to_page(pcpur_ptrs[cpu] + off);
-}
-
 #define PCPU_CHUNK_SIZE (4UL * 1024UL * 1024UL)
 
 static void __init pcpu_map_range(unsigned long start, unsigned long end,
@@ -1491,25 +1478,26 @@ void __init setup_per_cpu_areas(void)
 	size_t dyn_size, static_size = __per_cpu_end - __per_cpu_start;
 	static struct vm_struct vm;
 	unsigned long delta, cpu;
-	size_t pcpu_unit_size;
+	size_t size_sum, pcpu_unit_size;
 	size_t ptrs_size;
+	void **ptrs;
 
-	pcpur_size = PFN_ALIGN(static_size + PERCPU_MODULE_RESERVE +
-			       PERCPU_DYNAMIC_RESERVE);
-	dyn_size = pcpur_size - static_size - PERCPU_MODULE_RESERVE;
+	size_sum = PFN_ALIGN(static_size + PERCPU_MODULE_RESERVE +
+			     PERCPU_DYNAMIC_RESERVE);
+	dyn_size = size_sum - static_size - PERCPU_MODULE_RESERVE;
 
 
-	ptrs_size = PFN_ALIGN(num_possible_cpus() * sizeof(pcpur_ptrs[0]));
-	pcpur_ptrs = alloc_bootmem(ptrs_size);
+	ptrs_size = PFN_ALIGN(num_possible_cpus() * sizeof(ptrs[0]));
+	ptrs = alloc_bootmem(ptrs_size);
 
 	for_each_possible_cpu(cpu) {
-		pcpur_ptrs[cpu] = pcpu_alloc_bootmem(cpu, PCPU_CHUNK_SIZE,
-						     PCPU_CHUNK_SIZE);
+		ptrs[cpu] = pcpu_alloc_bootmem(cpu, PCPU_CHUNK_SIZE,
+					       PCPU_CHUNK_SIZE);
 
-		free_bootmem(__pa(pcpur_ptrs[cpu] + pcpur_size),
-			     PCPU_CHUNK_SIZE - pcpur_size);
+		free_bootmem(__pa(ptrs[cpu] + size_sum),
+			     PCPU_CHUNK_SIZE - size_sum);
 
-		memcpy(pcpur_ptrs[cpu], __per_cpu_load, static_size);
+		memcpy(ptrs[cpu], __per_cpu_load, static_size);
 	}
 
 	/* allocate address and map */
@@ -1523,14 +1511,14 @@ void __init setup_per_cpu_areas(void)
 
 		start += cpu * PCPU_CHUNK_SIZE;
 		end = start + PCPU_CHUNK_SIZE;
-		pcpu_map_range(start, end, virt_to_page(pcpur_ptrs[cpu]));
+		pcpu_map_range(start, end, virt_to_page(ptrs[cpu]));
 	}
 
-	pcpu_unit_size = pcpu_setup_first_chunk(pcpur_get_page, static_size,
+	pcpu_unit_size = pcpu_setup_first_chunk(static_size,
 						PERCPU_MODULE_RESERVE, dyn_size,
 						PCPU_CHUNK_SIZE, vm.addr);
 
-	free_bootmem(__pa(pcpur_ptrs), ptrs_size);
+	free_bootmem(__pa(ptrs), ptrs_size);
 
 	delta = (unsigned long)pcpu_base_addr - (unsigned long)__per_cpu_start;
 	for_each_possible_cpu(cpu) {
-- 
cgit v1.2.3


From 2f39e637ea240efb74cf807d31c93a71a0b89174 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Sat, 4 Jul 2009 08:11:00 +0900
Subject: percpu: allow non-linear / sparse cpu -> unit mapping

Currently cpu and unit are always identity mapped.  To allow more
efficient large page support on NUMA and lazy allocation for possible
but offline cpus, cpu -> unit mapping needs to be non-linear and/or
sparse.  This can be easily implemented by adding a cpu -> unit
mapping array and using it whenever looking up the matching unit for a
cpu.

The only unusal conversion is in pcpu_chunk_addr_search().  The passed
in address is unit0 based and unit0 might not be in use so it needs to
be converted to address of an in-use unit.  This is easily done by
adding the unit offset for the current processor.

[ Impact: allows non-linear/sparse cpu -> unit mapping, no visible change yet ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Miller <davem@davemloft.net>
---
 arch/sparc/kernel/smp_64.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/sparc/kernel/smp_64.c b/arch/sparc/kernel/smp_64.c
index f2f22ee97a7..6970333b48b 100644
--- a/arch/sparc/kernel/smp_64.c
+++ b/arch/sparc/kernel/smp_64.c
@@ -1516,7 +1516,7 @@ void __init setup_per_cpu_areas(void)
 
 	pcpu_unit_size = pcpu_setup_first_chunk(static_size,
 						PERCPU_MODULE_RESERVE, dyn_size,
-						PCPU_CHUNK_SIZE, vm.addr);
+						PCPU_CHUNK_SIZE, vm.addr, NULL);
 
 	free_bootmem(__pa(ptrs), ptrs_size);
 
-- 
cgit v1.2.3


From a530b7958612bafe2027e21359083dba84f0b3b4 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Sat, 4 Jul 2009 08:11:00 +0900
Subject: percpu: teach large page allocator about NUMA

Large page first chunk allocator is primarily used for NUMA machines;
however, its NUMA handling is extremely simplistic.  Regardless of
their proximity, each cpu is put into separate large page just to
return most of the allocated space back wasting large amount of
vmalloc space and increasing cache footprint.

This patch teachs NUMA details to large page allocator.  Given
processor proximity information, pcpu_lpage_build_unit_map() will find
fitting cpu -> unit mapping in which cpus in LOCAL_DISTANCE share the
same large page and not too much virtual address space is wasted.

This greatly reduces the unit and thus chunk size and wastes much less
address space for the first chunk.  For example, on 4/4 NUMA machine,
the original code occupied 16MB of virtual space for the first chunk
while the new code only uses 4MB - one 2MB page for each node.

[ Impact: much better space efficiency on NUMA machines ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jan Beulich <JBeulich@novell.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Miller <davem@davemloft.net>
---
 arch/x86/kernel/setup_percpu.c | 72 ++++++++++++++++++++++++++++++++----------
 1 file changed, 55 insertions(+), 17 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index 4f2e0ac9130..7501bb14bd5 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -149,36 +149,73 @@ static void __init pcpul_map(void *ptr, size_t size, void *addr)
 	set_pmd(pmd, pmd_v);
 }
 
+static int pcpu_lpage_cpu_distance(unsigned int from, unsigned int to)
+{
+	if (early_cpu_to_node(from) == early_cpu_to_node(to))
+		return LOCAL_DISTANCE;
+	else
+		return REMOTE_DISTANCE;
+}
+
 static ssize_t __init setup_pcpu_lpage(size_t static_size, bool chosen)
 {
 	size_t reserve = PERCPU_MODULE_RESERVE + PERCPU_DYNAMIC_RESERVE;
+	size_t dyn_size = reserve - PERCPU_FIRST_CHUNK_RESERVE;
+	size_t unit_map_size, unit_size;
+	int *unit_map;
+	int nr_units;
+	ssize_t ret;
+
+	/* on non-NUMA, embedding is better */
+	if (!chosen && !pcpu_need_numa())
+		return -EINVAL;
+
+	/* need PSE */
+	if (!cpu_has_pse) {
+		pr_warning("PERCPU: lpage allocator requires PSE\n");
+		return -EINVAL;
+	}
 
+	/* allocate and build unit_map */
+	unit_map_size = num_possible_cpus() * sizeof(int);
+	unit_map = alloc_bootmem_nopanic(unit_map_size);
+	if (!unit_map) {
+		pr_warning("PERCPU: failed to allocate unit_map\n");
+		return -ENOMEM;
+	}
+
+	ret = pcpu_lpage_build_unit_map(static_size,
+					PERCPU_FIRST_CHUNK_RESERVE,
+					&dyn_size, &unit_size, PMD_SIZE,
+					unit_map, pcpu_lpage_cpu_distance);
+	if (ret < 0) {
+		pr_warning("PERCPU: failed to build unit_map\n");
+		goto out_free;
+	}
+	nr_units = ret;
+
+	/* do the parameters look okay? */
 	if (!chosen) {
 		size_t vm_size = VMALLOC_END - VMALLOC_START;
-		size_t tot_size = num_possible_cpus() * PMD_SIZE;
-
-		/* on non-NUMA, embedding is better */
-		if (!pcpu_need_numa())
-			return -EINVAL;
+		size_t tot_size = nr_units * unit_size;
 
 		/* don't consume more than 20% of vmalloc area */
 		if (tot_size > vm_size / 5) {
 			pr_info("PERCPU: too large chunk size %zuMB for "
 				"large page remap\n", tot_size >> 20);
-			return -EINVAL;
+			ret = -EINVAL;
+			goto out_free;
 		}
 	}
 
-	/* need PSE */
-	if (!cpu_has_pse) {
-		pr_warning("PERCPU: lpage allocator requires PSE\n");
-		return -EINVAL;
-	}
-
-	return pcpu_lpage_first_chunk(static_size, PERCPU_FIRST_CHUNK_RESERVE,
-				      reserve - PERCPU_FIRST_CHUNK_RESERVE,
-				      PMD_SIZE,
-				      pcpu_fc_alloc, pcpu_fc_free, pcpul_map);
+	ret = pcpu_lpage_first_chunk(static_size, PERCPU_FIRST_CHUNK_RESERVE,
+				     dyn_size, unit_size, PMD_SIZE,
+				     unit_map, nr_units,
+				     pcpu_fc_alloc, pcpu_fc_free, pcpul_map);
+out_free:
+	if (ret < 0)
+		free_bootmem(__pa(unit_map), unit_map_size);
+	return ret;
 }
 #else
 static ssize_t __init setup_pcpu_lpage(size_t static_size, bool chosen)
@@ -299,7 +336,8 @@ void __init setup_per_cpu_areas(void)
 	/* alrighty, percpu areas up and running */
 	delta = (unsigned long)pcpu_base_addr - (unsigned long)__per_cpu_start;
 	for_each_possible_cpu(cpu) {
-		per_cpu_offset(cpu) = delta + cpu * pcpu_unit_size;
+		per_cpu_offset(cpu) =
+			delta + pcpu_unit_map[cpu] * pcpu_unit_size;
 		per_cpu(this_cpu_off, cpu) = per_cpu_offset(cpu);
 		per_cpu(cpu_number, cpu) = cpu;
 		setup_percpu_segment(cpu);
-- 
cgit v1.2.3


From 42204455f160dab0c47f19e1be23f5c927af2d17 Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinder@kernel.org>
Date: Sat, 4 Jul 2009 07:50:00 +0530
Subject: x86: Clean up mtrr/amd.c:

Fix trivial style problems :

  ERROR: trailing whitespace
  WARNING: line over 80 characters
  ERROR: do not use C99 // comments

arch/x86/kernel/cpu/mtrr/amd.o:

   text	   data	    bss	    dec	    hex	filename
    501	     32	      0	    533	    215	amd.o.before
    501	     32	      0	    533	    215	amd.o.after

md5:
   62f795eb840ee2d17b03df89e789e76c  amd.o.before.asm
   62f795eb840ee2d17b03df89e789e76c  amd.o.after.asm

Suggested-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <20090703164225.GA21447@elte.hu>
[ Also restructured comments to be standard, removed stray return,
  converted function description to DocBook style, etc. ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/mtrr/amd.c | 97 ++++++++++++++++++++++--------------------
 1 file changed, 51 insertions(+), 46 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/mtrr/amd.c b/arch/x86/kernel/cpu/mtrr/amd.c
index ee2331b0e58..33af14110df 100644
--- a/arch/x86/kernel/cpu/mtrr/amd.c
+++ b/arch/x86/kernel/cpu/mtrr/amd.c
@@ -7,15 +7,15 @@
 
 static void
 amd_get_mtrr(unsigned int reg, unsigned long *base,
-	     unsigned long *size, mtrr_type * type)
+	     unsigned long *size, mtrr_type *type)
 {
 	unsigned long low, high;
 
 	rdmsr(MSR_K6_UWCCR, low, high);
-	/*  Upper dword is region 1, lower is region 0  */
+	/* Upper dword is region 1, lower is region 0 */
 	if (reg == 1)
 		low = high;
-	/*  The base masks off on the right alignment  */
+	/* The base masks off on the right alignment */
 	*base = (low & 0xFFFE0000) >> PAGE_SHIFT;
 	*type = 0;
 	if (low & 1)
@@ -27,74 +27,81 @@ amd_get_mtrr(unsigned int reg, unsigned long *base,
 		return;
 	}
 	/*
-	 *  This needs a little explaining. The size is stored as an
-	 *  inverted mask of bits of 128K granularity 15 bits long offset
-	 *  2 bits
+	 * This needs a little explaining. The size is stored as an
+	 * inverted mask of bits of 128K granularity 15 bits long offset
+	 * 2 bits.
 	 *
-	 *  So to get a size we do invert the mask and add 1 to the lowest
-	 *  mask bit (4 as its 2 bits in). This gives us a size we then shift
-	 *  to turn into 128K blocks
+	 * So to get a size we do invert the mask and add 1 to the lowest
+	 * mask bit (4 as its 2 bits in). This gives us a size we then shift
+	 * to turn into 128K blocks.
 	 *
-	 *  eg              111 1111 1111 1100      is 512K
+	 * eg              111 1111 1111 1100      is 512K
 	 *
-	 *  invert          000 0000 0000 0011
-	 *  +1              000 0000 0000 0100
-	 *  *128K   ...
+	 * invert          000 0000 0000 0011
+	 * +1              000 0000 0000 0100
+	 * *128K   ...
 	 */
 	low = (~low) & 0x1FFFC;
 	*size = (low + 4) << (15 - PAGE_SHIFT);
-	return;
 }
 
-static void amd_set_mtrr(unsigned int reg, unsigned long base,
-			 unsigned long size, mtrr_type type)
-/*  [SUMMARY] Set variable MTRR register on the local CPU.
-    <reg> The register to set.
-    <base> The base address of the region.
-    <size> The size of the region. If this is 0 the region is disabled.
-    <type> The type of the region.
-    [RETURNS] Nothing.
-*/
+/**
+ * amd_set_mtrr - Set variable MTRR register on the local CPU.
+ *
+ * @reg The register to set.
+ * @base The base address of the region.
+ * @size The size of the region. If this is 0 the region is disabled.
+ * @type The type of the region.
+ *
+ * Returns nothing.
+ */
+static void
+amd_set_mtrr(unsigned int reg, unsigned long base, unsigned long size, mtrr_type type)
 {
 	u32 regs[2];
 
 	/*
-	 *  Low is MTRR0 , High MTRR 1
+	 * Low is MTRR0, High MTRR 1
 	 */
 	rdmsr(MSR_K6_UWCCR, regs[0], regs[1]);
 	/*
-	 *  Blank to disable
+	 * Blank to disable
 	 */
-	if (size == 0)
+	if (size == 0) {
 		regs[reg] = 0;
-	else
-		/* Set the register to the base, the type (off by one) and an
-		   inverted bitmask of the size The size is the only odd
-		   bit. We are fed say 512K We invert this and we get 111 1111
-		   1111 1011 but if you subtract one and invert you get the   
-		   desired 111 1111 1111 1100 mask
-
-		   But ~(x - 1) == ~x + 1 == -x. Two's complement rocks!  */
+	} else {
+		/*
+		 * Set the register to the base, the type (off by one) and an
+		 * inverted bitmask of the size The size is the only odd
+		 * bit. We are fed say 512K We invert this and we get 111 1111
+		 * 1111 1011 but if you subtract one and invert you get the
+		 * desired 111 1111 1111 1100 mask
+		 *
+		 *  But ~(x - 1) == ~x + 1 == -x. Two's complement rocks!
+		 */
 		regs[reg] = (-size >> (15 - PAGE_SHIFT) & 0x0001FFFC)
 		    | (base << PAGE_SHIFT) | (type + 1);
+	}
 
 	/*
-	 *  The writeback rule is quite specific. See the manual. Its
-	 *  disable local interrupts, write back the cache, set the mtrr
+	 * The writeback rule is quite specific. See the manual. Its
+	 * disable local interrupts, write back the cache, set the mtrr
 	 */
 	wbinvd();
 	wrmsr(MSR_K6_UWCCR, regs[0], regs[1]);
 }
 
-static int amd_validate_add_page(unsigned long base, unsigned long size, unsigned int type)
+static int
+amd_validate_add_page(unsigned long base, unsigned long size, unsigned int type)
 {
-	/* Apply the K6 block alignment and size rules
-	   In order
-	   o Uncached or gathering only
-	   o 128K or bigger block
-	   o Power of 2 block
-	   o base suitably aligned to the power
-	*/
+	/*
+	 * Apply the K6 block alignment and size rules
+	 * In order
+	 * o Uncached or gathering only
+	 * o 128K or bigger block
+	 * o Power of 2 block
+	 * o base suitably aligned to the power
+	 */
 	if (type > MTRR_TYPE_WRCOMB || size < (1 << (17 - PAGE_SHIFT))
 	    || (size & ~(size - 1)) - size || (base & (size - 1)))
 		return -EINVAL;
@@ -115,5 +122,3 @@ int __init amd_init_mtrr(void)
 	set_mtrr_ops(&amd_mtrr_ops);
 	return 0;
 }
-
-//arch_initcall(amd_mtrr_init);
-- 
cgit v1.2.3


From 6c4caa1ab737502190e416b76e6c10d2bf24276a Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinder@kernel.org>
Date: Sat, 4 Jul 2009 07:50:44 +0530
Subject: x86: Clean up mtrr/centaur.c

Remove dead code and fix trivial style problems:

  ERROR: trailing whitespace X 2
  WARNING: line over 80 characters X 3
  ROR: trailing whitespace
  ERROR: do not use C99 // comments X 2

arch/x86/kernel/cpu/mtrr/centaur.o:

   text	   data	    bss	    dec	    hex	filename
    605	     32	     68	    705	    2c1	centaur.o.before
    605	     32	     68	    705	    2c1	centaur.o.after

md5:
   a4865ea98ce3c163bb1d376a3949b3e3  centaur.o.before.asm
   a4865ea98ce3c163bb1d376a3949b3e3  centaur.o.after.asm

Suggested-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <20090703164225.GA21447@elte.hu>
[ Standardized comments, DocBook, curly braces, newlines. ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/mtrr/centaur.c | 168 ++++++++-----------------------------
 1 file changed, 35 insertions(+), 133 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/mtrr/centaur.c b/arch/x86/kernel/cpu/mtrr/centaur.c
index cb9aa3a7a7a..de89f14eff3 100644
--- a/arch/x86/kernel/cpu/mtrr/centaur.c
+++ b/arch/x86/kernel/cpu/mtrr/centaur.c
@@ -1,7 +1,9 @@
 #include <linux/init.h>
 #include <linux/mm.h>
+
 #include <asm/mtrr.h>
 #include <asm/msr.h>
+
 #include "mtrr.h"
 
 static struct {
@@ -12,25 +14,25 @@ static struct {
 static u8 centaur_mcr_reserved;
 static u8 centaur_mcr_type;	/* 0 for winchip, 1 for winchip2 */
 
-/*
- *	Report boot time MCR setups 
+/**
+ * centaur_get_free_region - Get a free MTRR.
+ *
+ * @base: The starting (base) address of the region.
+ * @size: The size (in bytes) of the region.
+ *
+ * Returns: the index of the region on success, else -1 on error.
  */
-
 static int
 centaur_get_free_region(unsigned long base, unsigned long size, int replace_reg)
-/*  [SUMMARY] Get a free MTRR.
-    <base> The starting (base) address of the region.
-    <size> The size (in bytes) of the region.
-    [RETURNS] The index of the region on success, else -1 on error.
-*/
 {
-	int i, max;
-	mtrr_type ltype;
 	unsigned long lbase, lsize;
+	mtrr_type ltype;
+	int i, max;
 
 	max = num_var_ranges;
 	if (replace_reg >= 0 && replace_reg < max)
 		return replace_reg;
+
 	for (i = 0; i < max; ++i) {
 		if (centaur_mcr_reserved & (1 << i))
 			continue;
@@ -38,11 +40,14 @@ centaur_get_free_region(unsigned long base, unsigned long size, int replace_reg)
 		if (lsize == 0)
 			return i;
 	}
+
 	return -ENOSPC;
 }
 
-void
-mtrr_centaur_report_mcr(int mcr, u32 lo, u32 hi)
+/*
+ * Report boot time MCR setups
+ */
+void mtrr_centaur_report_mcr(int mcr, u32 lo, u32 hi)
 {
 	centaur_mcr[mcr].low = lo;
 	centaur_mcr[mcr].high = hi;
@@ -54,33 +59,35 @@ centaur_get_mcr(unsigned int reg, unsigned long *base,
 {
 	*base = centaur_mcr[reg].high >> PAGE_SHIFT;
 	*size = -(centaur_mcr[reg].low & 0xfffff000) >> PAGE_SHIFT;
-	*type = MTRR_TYPE_WRCOMB;	/*  If it is there, it is write-combining  */
+	*type = MTRR_TYPE_WRCOMB;		/* write-combining  */
+
 	if (centaur_mcr_type == 1 && ((centaur_mcr[reg].low & 31) & 2))
 		*type = MTRR_TYPE_UNCACHABLE;
 	if (centaur_mcr_type == 1 && (centaur_mcr[reg].low & 31) == 25)
 		*type = MTRR_TYPE_WRBACK;
 	if (centaur_mcr_type == 0 && (centaur_mcr[reg].low & 31) == 31)
 		*type = MTRR_TYPE_WRBACK;
-
 }
 
-static void centaur_set_mcr(unsigned int reg, unsigned long base,
-			    unsigned long size, mtrr_type type)
+static void
+centaur_set_mcr(unsigned int reg, unsigned long base,
+		unsigned long size, mtrr_type type)
 {
 	unsigned long low, high;
 
 	if (size == 0) {
-		/*  Disable  */
+		/* Disable */
 		high = low = 0;
 	} else {
 		high = base << PAGE_SHIFT;
-		if (centaur_mcr_type == 0)
-			low = -size << PAGE_SHIFT | 0x1f;	/* only support write-combining... */
-		else {
+		if (centaur_mcr_type == 0) {
+			/* Only support write-combining... */
+			low = -size << PAGE_SHIFT | 0x1f;
+		} else {
 			if (type == MTRR_TYPE_UNCACHABLE)
-				low = -size << PAGE_SHIFT | 0x02;	/* NC */
+				low = -size << PAGE_SHIFT | 0x02; /* NC */
 			else
-				low = -size << PAGE_SHIFT | 0x09;	/* WWO,WC */
+				low = -size << PAGE_SHIFT | 0x09; /* WWO, WC */
 		}
 	}
 	centaur_mcr[reg].high = high;
@@ -88,118 +95,16 @@ static void centaur_set_mcr(unsigned int reg, unsigned long base,
 	wrmsr(MSR_IDT_MCR0 + reg, low, high);
 }
 
-#if 0
-/*
- *	Initialise the later (saner) Winchip MCR variant. In this version
- *	the BIOS can pass us the registers it has used (but not their values)
- *	and the control register is read/write
- */
-
-static void __init
-centaur_mcr1_init(void)
-{
-	unsigned i;
-	u32 lo, hi;
-
-	/* Unfortunately, MCR's are read-only, so there is no way to
-	 * find out what the bios might have done.
-	 */
-
-	rdmsr(MSR_IDT_MCR_CTRL, lo, hi);
-	if (((lo >> 17) & 7) == 1) {	/* Type 1 Winchip2 MCR */
-		lo &= ~0x1C0;	/* clear key */
-		lo |= 0x040;	/* set key to 1 */
-		wrmsr(MSR_IDT_MCR_CTRL, lo, hi);	/* unlock MCR */
-	}
-
-	centaur_mcr_type = 1;
-
-	/*
-	 *  Clear any unconfigured MCR's.
-	 */
-
-	for (i = 0; i < 8; ++i) {
-		if (centaur_mcr[i].high == 0 && centaur_mcr[i].low == 0) {
-			if (!(lo & (1 << (9 + i))))
-				wrmsr(MSR_IDT_MCR0 + i, 0, 0);
-			else
-				/*
-				 *      If the BIOS set up an MCR we cannot see it
-				 *      but we don't wish to obliterate it
-				 */
-				centaur_mcr_reserved |= (1 << i);
-		}
-	}
-	/*  
-	 *  Throw the main write-combining switch... 
-	 *  However if OOSTORE is enabled then people have already done far
-	 *  cleverer things and we should behave. 
-	 */
-
-	lo |= 15;		/* Write combine enables */
-	wrmsr(MSR_IDT_MCR_CTRL, lo, hi);
-}
-
-/*
- *	Initialise the original winchip with read only MCR registers
- *	no used bitmask for the BIOS to pass on and write only control
- */
-
-static void __init
-centaur_mcr0_init(void)
-{
-	unsigned i;
-
-	/* Unfortunately, MCR's are read-only, so there is no way to
-	 * find out what the bios might have done.
-	 */
-
-	/* Clear any unconfigured MCR's.
-	 * This way we are sure that the centaur_mcr array contains the actual
-	 * values. The disadvantage is that any BIOS tweaks are thus undone.
-	 *
-	 */
-	for (i = 0; i < 8; ++i) {
-		if (centaur_mcr[i].high == 0 && centaur_mcr[i].low == 0)
-			wrmsr(MSR_IDT_MCR0 + i, 0, 0);
-	}
-
-	wrmsr(MSR_IDT_MCR_CTRL, 0x01F0001F, 0);	/* Write only */
-}
-
-/*
- *	Initialise Winchip series MCR registers
- */
-
-static void __init
-centaur_mcr_init(void)
-{
-	struct set_mtrr_context ctxt;
-
-	set_mtrr_prepare_save(&ctxt);
-	set_mtrr_cache_disable(&ctxt);
-
-	if (boot_cpu_data.x86_model == 4)
-		centaur_mcr0_init();
-	else if (boot_cpu_data.x86_model == 8 || boot_cpu_data.x86_model == 9)
-		centaur_mcr1_init();
-
-	set_mtrr_done(&ctxt);
-}
-#endif
-
-static int centaur_validate_add_page(unsigned long base, 
-				     unsigned long size, unsigned int type)
+static int
+centaur_validate_add_page(unsigned long base, unsigned long size, unsigned int type)
 {
 	/*
-	 *  FIXME: Winchip2 supports uncached
+	 * FIXME: Winchip2 supports uncached
 	 */
-	if (type != MTRR_TYPE_WRCOMB && 
+	if (type != MTRR_TYPE_WRCOMB &&
 	    (centaur_mcr_type == 0 || type != MTRR_TYPE_UNCACHABLE)) {
-		printk(KERN_WARNING
-		       "mtrr: only write-combining%s supported\n",
-		       centaur_mcr_type ? " and uncacheable are"
-		       : " is");
+		pr_warning("mtrr: only write-combining%s supported\n",
+			   centaur_mcr_type ? " and uncacheable are" : " is");
 		return -EINVAL;
 	}
 	return 0;
@@ -207,7 +112,6 @@ static int centaur_validate_add_page(unsigned long base,
 
 static struct mtrr_ops centaur_mtrr_ops = {
 	.vendor            = X86_VENDOR_CENTAUR,
-//	.init              = centaur_mcr_init,
 	.set               = centaur_set_mcr,
 	.get               = centaur_get_mcr,
 	.get_free_region   = centaur_get_free_region,
@@ -220,5 +124,3 @@ int __init centaur_init_mtrr(void)
 	set_mtrr_ops(&centaur_mtrr_ops);
 	return 0;
 }
-
-//arch_initcall(centaur_init_mtrr);
-- 
cgit v1.2.3


From 63f9600fadb10ea739108ae93e3e842d9843c58b Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinder@kernel.org>
Date: Sat, 4 Jul 2009 07:51:32 +0530
Subject: x86: Clean up mtrr/cleanup.c

Fix trivial style problems:

  WARNING: Use #include <linux/uaccess.h> instead of <asm/uaccess.h>
  WARNING: Use #include <linux/kvm_para.h> instead of <asm/kvm_para.h>

Also, nr_mtrr_spare_reg should be unsigned long.

arch/x86/kernel/cpu/mtrr/cleanup.o:

   text	   data	    bss	    dec	    hex	filename
   6241	   8992	   2056	  17289	   4389	cleanup.o.before
   6241	   8992	   2056	  17289	   4389	cleanup.o.after

The md5 has changed:
   1a7a27513aef1825236daf29110fe657  cleanup.o.before.asm
   bcea358efa2532b6020e338e158447af  cleanup.o.after.asm

Because a WARN_ON()'s __LINE__ value changed by 3 lines.

Suggested-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <20090703164225.GA21447@elte.hu>
[ Did lots of other cleanups to make the code look more consistent. ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/mtrr/cleanup.c | 350 +++++++++++++++++++------------------
 1 file changed, 176 insertions(+), 174 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/mtrr/cleanup.c b/arch/x86/kernel/cpu/mtrr/cleanup.c
index 1d584a18a50..b8aba811b60 100644
--- a/arch/x86/kernel/cpu/mtrr/cleanup.c
+++ b/arch/x86/kernel/cpu/mtrr/cleanup.c
@@ -1,51 +1,52 @@
-/*  MTRR (Memory Type Range Register) cleanup
-
-    Copyright (C) 2009 Yinghai Lu
-
-    This library is free software; you can redistribute it and/or
-    modify it under the terms of the GNU Library General Public
-    License as published by the Free Software Foundation; either
-    version 2 of the License, or (at your option) any later version.
-
-    This library is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-    Library General Public License for more details.
-
-    You should have received a copy of the GNU Library General Public
-    License along with this library; if not, write to the Free
-    Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
+/*
+ * MTRR (Memory Type Range Register) cleanup
+ *
+ *  Copyright (C) 2009 Yinghai Lu
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Library General Public
+ * License as published by the Free Software Foundation; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * Library General Public License for more details.
+ *
+ * You should have received a copy of the GNU Library General Public
+ * License along with this library; if not, write to the Free
+ * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/smp.h>
 #include <linux/cpu.h>
-#include <linux/mutex.h>
 #include <linux/sort.h>
+#include <linux/mutex.h>
+#include <linux/uaccess.h>
+#include <linux/kvm_para.h>
 
+#include <asm/processor.h>
 #include <asm/e820.h>
 #include <asm/mtrr.h>
-#include <asm/uaccess.h>
-#include <asm/processor.h>
 #include <asm/msr.h>
-#include <asm/kvm_para.h>
+
 #include "mtrr.h"
 
-/* should be related to MTRR_VAR_RANGES nums */
+/* Should be related to MTRR_VAR_RANGES nums */
 #define RANGE_NUM 256
 
 struct res_range {
-	unsigned long start;
-	unsigned long end;
+	unsigned long	start;
+	unsigned long	end;
 };
 
 static int __init
-add_range(struct res_range *range, int nr_range, unsigned long start,
-			      unsigned long end)
+add_range(struct res_range *range, int nr_range,
+	  unsigned long start, unsigned long end)
 {
-	/* out of slots */
+	/* Out of slots: */
 	if (nr_range >= RANGE_NUM)
 		return nr_range;
 
@@ -58,12 +59,12 @@ add_range(struct res_range *range, int nr_range, unsigned long start,
 }
 
 static int __init
-add_range_with_merge(struct res_range *range, int nr_range, unsigned long start,
-			      unsigned long end)
+add_range_with_merge(struct res_range *range, int nr_range,
+		     unsigned long start, unsigned long end)
 {
 	int i;
 
-	/* try to merge it with old one */
+	/* Try to merge it with old one: */
 	for (i = 0; i < nr_range; i++) {
 		unsigned long final_start, final_end;
 		unsigned long common_start, common_end;
@@ -84,7 +85,7 @@ add_range_with_merge(struct res_range *range, int nr_range, unsigned long start,
 		return nr_range;
 	}
 
-	/* need to add that */
+	/* Need to add it: */
 	return add_range(range, nr_range, start, end);
 }
 
@@ -117,7 +118,7 @@ subtract_range(struct res_range *range, unsigned long start, unsigned long end)
 		}
 
 		if (start > range[j].start && end < range[j].end) {
-			/* find the new spare */
+			/* Find the new spare: */
 			for (i = 0; i < RANGE_NUM; i++) {
 				if (range[i].end == 0)
 					break;
@@ -147,13 +148,19 @@ static int __init cmp_range(const void *x1, const void *x2)
 }
 
 struct var_mtrr_range_state {
-	unsigned long base_pfn;
-	unsigned long size_pfn;
-	mtrr_type type;
+	unsigned long	base_pfn;
+	unsigned long	size_pfn;
+	mtrr_type	type;
 };
 
 static struct var_mtrr_range_state __initdata range_state[RANGE_NUM];
+
 static int __initdata debug_print;
+#define Dprintk(x...) do { if (debug_print) printk(KERN_DEBUG x); } while (0)
+
+
+#define BIOS_BUG_MSG KERN_WARNING \
+	"WARNING: BIOS bug: VAR MTRR %d contains strange UC entry under 1M, check with your system vendor!\n"
 
 static int __init
 x86_get_mtrr_mem_range(struct res_range *range, int nr_range,
@@ -180,7 +187,7 @@ x86_get_mtrr_mem_range(struct res_range *range, int nr_range,
 				 range[i].start, range[i].end + 1);
 	}
 
-	/* take out UC ranges */
+	/* Take out UC ranges: */
 	for (i = 0; i < num_var_ranges; i++) {
 		type = range_state[i].type;
 		if (type != MTRR_TYPE_UNCACHABLE &&
@@ -244,10 +251,9 @@ static int __initdata nr_range;
 
 static unsigned long __init sum_ranges(struct res_range *range, int nr_range)
 {
-	unsigned long sum;
+	unsigned long sum = 0;
 	int i;
 
-	sum = 0;
 	for (i = 0; i < nr_range; i++)
 		sum += range[i].end + 1 - range[i].start;
 
@@ -288,7 +294,7 @@ struct var_mtrr_state {
 
 static void __init
 set_var_mtrr(unsigned int reg, unsigned long basek, unsigned long sizek,
-		unsigned char type, unsigned int address_bits)
+	     unsigned char type, unsigned int address_bits)
 {
 	u32 base_lo, base_hi, mask_lo, mask_hi;
 	u64 base, mask;
@@ -301,7 +307,7 @@ set_var_mtrr(unsigned int reg, unsigned long basek, unsigned long sizek,
 	mask = (1ULL << address_bits) - 1;
 	mask &= ~((((u64)sizek) << 10) - 1);
 
-	base  = ((u64)basek) << 10;
+	base = ((u64)basek) << 10;
 
 	base |= type;
 	mask |= 0x800;
@@ -317,15 +323,14 @@ set_var_mtrr(unsigned int reg, unsigned long basek, unsigned long sizek,
 
 static void __init
 save_var_mtrr(unsigned int reg, unsigned long basek, unsigned long sizek,
-		unsigned char type)
+	      unsigned char type)
 {
 	range_state[reg].base_pfn = basek >> (PAGE_SHIFT - 10);
 	range_state[reg].size_pfn = sizek >> (PAGE_SHIFT - 10);
 	range_state[reg].type = type;
 }
 
-static void __init
-set_var_mtrr_all(unsigned int address_bits)
+static void __init set_var_mtrr_all(unsigned int address_bits)
 {
 	unsigned long basek, sizek;
 	unsigned char type;
@@ -342,11 +347,11 @@ set_var_mtrr_all(unsigned int address_bits)
 
 static unsigned long to_size_factor(unsigned long sizek, char *factorp)
 {
-	char factor;
 	unsigned long base = sizek;
+	char factor;
 
 	if (base & ((1<<10) - 1)) {
-		/* not MB alignment */
+		/* Not MB-aligned: */
 		factor = 'K';
 	} else if (base & ((1<<20) - 1)) {
 		factor = 'M';
@@ -372,11 +377,12 @@ range_to_mtrr(unsigned int reg, unsigned long range_startk,
 		unsigned long max_align, align;
 		unsigned long sizek;
 
-		/* Compute the maximum size I can make a range */
+		/* Compute the maximum size with which we can make a range: */
 		if (range_startk)
 			max_align = ffs(range_startk) - 1;
 		else
 			max_align = 32;
+
 		align = fls(range_sizek) - 1;
 		if (align > max_align)
 			align = max_align;
@@ -386,11 +392,10 @@ range_to_mtrr(unsigned int reg, unsigned long range_startk,
 			char start_factor = 'K', size_factor = 'K';
 			unsigned long start_base, size_base;
 
-			start_base = to_size_factor(range_startk,
-							 &start_factor),
-			size_base = to_size_factor(sizek, &size_factor),
+			start_base = to_size_factor(range_startk, &start_factor);
+			size_base = to_size_factor(sizek, &size_factor);
 
-			printk(KERN_DEBUG "Setting variable MTRR %d, "
+			Dprintk("Setting variable MTRR %d, "
 				"base: %ld%cB, range: %ld%cB, type %s\n",
 				reg, start_base, start_factor,
 				size_base, size_factor,
@@ -425,10 +430,11 @@ range_to_mtrr_with_hole(struct var_mtrr_state *state, unsigned long basek,
 	chunk_sizek = state->chunk_sizek;
 	gran_sizek = state->gran_sizek;
 
-	/* align with gran size, prevent small block used up MTRRs */
+	/* Align with gran size, prevent small block used up MTRRs: */
 	range_basek = ALIGN(state->range_startk, gran_sizek);
 	if ((range_basek > basek) && basek)
 		return second_sizek;
+
 	state->range_sizek -= (range_basek - state->range_startk);
 	range_sizek = ALIGN(state->range_sizek, gran_sizek);
 
@@ -439,22 +445,21 @@ range_to_mtrr_with_hole(struct var_mtrr_state *state, unsigned long basek,
 	}
 	state->range_sizek = range_sizek;
 
-	/* try to append some small hole */
+	/* Try to append some small hole: */
 	range0_basek = state->range_startk;
 	range0_sizek = ALIGN(state->range_sizek, chunk_sizek);
 
-	/* no increase */
+	/* No increase: */
 	if (range0_sizek == state->range_sizek) {
-		if (debug_print)
-			printk(KERN_DEBUG "rangeX: %016lx - %016lx\n",
-				range0_basek<<10,
-				(range0_basek + state->range_sizek)<<10);
+		Dprintk("rangeX: %016lx - %016lx\n",
+			range0_basek<<10,
+			(range0_basek + state->range_sizek)<<10);
 		state->reg = range_to_mtrr(state->reg, range0_basek,
 				state->range_sizek, MTRR_TYPE_WRBACK);
 		return 0;
 	}
 
-	/* only cut back, when it is not the last */
+	/* Only cut back when it is not the last: */
 	if (sizek) {
 		while (range0_basek + range0_sizek > (basek + sizek)) {
 			if (range0_sizek >= chunk_sizek)
@@ -470,16 +475,16 @@ range_to_mtrr_with_hole(struct var_mtrr_state *state, unsigned long basek,
 second_try:
 	range_basek = range0_basek + range0_sizek;
 
-	/* one hole in the middle */
+	/* One hole in the middle: */
 	if (range_basek > basek && range_basek <= (basek + sizek))
 		second_sizek = range_basek - basek;
 
 	if (range0_sizek > state->range_sizek) {
 
-		/* one hole in middle or at end */
+		/* One hole in middle or at the end: */
 		hole_sizek = range0_sizek - state->range_sizek - second_sizek;
 
-		/* hole size should be less than half of range0 size */
+		/* Hole size should be less than half of range0 size: */
 		if (hole_sizek >= (range0_sizek >> 1) &&
 		    range0_sizek >= chunk_sizek) {
 			range0_sizek -= chunk_sizek;
@@ -491,32 +496,30 @@ second_try:
 	}
 
 	if (range0_sizek) {
-		if (debug_print)
-			printk(KERN_DEBUG "range0: %016lx - %016lx\n",
-				range0_basek<<10,
-				(range0_basek + range0_sizek)<<10);
+		Dprintk("range0: %016lx - %016lx\n",
+			range0_basek<<10,
+			(range0_basek + range0_sizek)<<10);
 		state->reg = range_to_mtrr(state->reg, range0_basek,
 				range0_sizek, MTRR_TYPE_WRBACK);
 	}
 
 	if (range0_sizek < state->range_sizek) {
-		/* need to handle left over */
+		/* Need to handle left over range: */
 		range_sizek = state->range_sizek - range0_sizek;
 
-		if (debug_print)
-			printk(KERN_DEBUG "range: %016lx - %016lx\n",
-				 range_basek<<10,
-				 (range_basek + range_sizek)<<10);
+		Dprintk("range: %016lx - %016lx\n",
+			 range_basek<<10,
+			 (range_basek + range_sizek)<<10);
+
 		state->reg = range_to_mtrr(state->reg, range_basek,
 				 range_sizek, MTRR_TYPE_WRBACK);
 	}
 
 	if (hole_sizek) {
 		hole_basek = range_basek - hole_sizek - second_sizek;
-		if (debug_print)
-			printk(KERN_DEBUG "hole: %016lx - %016lx\n",
-				 hole_basek<<10,
-				 (hole_basek + hole_sizek)<<10);
+		Dprintk("hole: %016lx - %016lx\n",
+			 hole_basek<<10,
+			 (hole_basek + hole_sizek)<<10);
 		state->reg = range_to_mtrr(state->reg, hole_basek,
 				 hole_sizek, MTRR_TYPE_UNCACHABLE);
 	}
@@ -537,23 +540,23 @@ set_var_mtrr_range(struct var_mtrr_state *state, unsigned long base_pfn,
 	basek = base_pfn << (PAGE_SHIFT - 10);
 	sizek = size_pfn << (PAGE_SHIFT - 10);
 
-	/* See if I can merge with the last range */
+	/* See if I can merge with the last range: */
 	if ((basek <= 1024) ||
 	    (state->range_startk + state->range_sizek == basek)) {
 		unsigned long endk = basek + sizek;
 		state->range_sizek = endk - state->range_startk;
 		return;
 	}
-	/* Write the range mtrrs */
+	/* Write the range mtrrs: */
 	if (state->range_sizek != 0)
 		second_sizek = range_to_mtrr_with_hole(state, basek, sizek);
 
-	/* Allocate an msr */
+	/* Allocate an msr: */
 	state->range_startk = basek + second_sizek;
 	state->range_sizek  = sizek - second_sizek;
 }
 
-/* mininum size of mtrr block that can take hole */
+/* Mininum size of mtrr block that can take hole: */
 static u64 mtrr_chunk_size __initdata = (256ULL<<20);
 
 static int __init parse_mtrr_chunk_size_opt(char *p)
@@ -565,7 +568,7 @@ static int __init parse_mtrr_chunk_size_opt(char *p)
 }
 early_param("mtrr_chunk_size", parse_mtrr_chunk_size_opt);
 
-/* granity of mtrr of block */
+/* Granularity of mtrr of block: */
 static u64 mtrr_gran_size __initdata;
 
 static int __init parse_mtrr_gran_size_opt(char *p)
@@ -577,7 +580,7 @@ static int __init parse_mtrr_gran_size_opt(char *p)
 }
 early_param("mtrr_gran_size", parse_mtrr_gran_size_opt);
 
-static int nr_mtrr_spare_reg __initdata =
+static unsigned long nr_mtrr_spare_reg __initdata =
 				 CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT;
 
 static int __init parse_mtrr_spare_reg(char *arg)
@@ -586,7 +589,6 @@ static int __init parse_mtrr_spare_reg(char *arg)
 		nr_mtrr_spare_reg = simple_strtoul(arg, NULL, 0);
 	return 0;
 }
-
 early_param("mtrr_spare_reg_nr", parse_mtrr_spare_reg);
 
 static int __init
@@ -594,8 +596,8 @@ x86_setup_var_mtrrs(struct res_range *range, int nr_range,
 		    u64 chunk_size, u64 gran_size)
 {
 	struct var_mtrr_state var_state;
-	int i;
 	int num_reg;
+	int i;
 
 	var_state.range_startk	= 0;
 	var_state.range_sizek	= 0;
@@ -605,17 +607,18 @@ x86_setup_var_mtrrs(struct res_range *range, int nr_range,
 
 	memset(range_state, 0, sizeof(range_state));
 
-	/* Write the range etc */
-	for (i = 0; i < nr_range; i++)
+	/* Write the range: */
+	for (i = 0; i < nr_range; i++) {
 		set_var_mtrr_range(&var_state, range[i].start,
 				   range[i].end - range[i].start + 1);
+	}
 
-	/* Write the last range */
+	/* Write the last range: */
 	if (var_state.range_sizek != 0)
 		range_to_mtrr_with_hole(&var_state, 0, 0);
 
 	num_reg = var_state.reg;
-	/* Clear out the extra MTRR's */
+	/* Clear out the extra MTRR's: */
 	while (var_state.reg < num_var_ranges) {
 		save_var_mtrr(var_state.reg, 0, 0, 0);
 		var_state.reg++;
@@ -625,11 +628,11 @@ x86_setup_var_mtrrs(struct res_range *range, int nr_range,
 }
 
 struct mtrr_cleanup_result {
-	unsigned long gran_sizek;
-	unsigned long chunk_sizek;
-	unsigned long lose_cover_sizek;
-	unsigned int num_reg;
-	int bad;
+	unsigned long	gran_sizek;
+	unsigned long	chunk_sizek;
+	unsigned long	lose_cover_sizek;
+	unsigned int	num_reg;
+	int		bad;
 };
 
 /*
@@ -645,10 +648,10 @@ static unsigned long __initdata min_loss_pfn[RANGE_NUM];
 
 static void __init print_out_mtrr_range_state(void)
 {
-	int i;
 	char start_factor = 'K', size_factor = 'K';
 	unsigned long start_base, size_base;
 	mtrr_type type;
+	int i;
 
 	for (i = 0; i < num_var_ranges; i++) {
 
@@ -676,10 +679,10 @@ static int __init mtrr_need_cleanup(void)
 	int i;
 	mtrr_type type;
 	unsigned long size;
-	/* extra one for all 0 */
+	/* Extra one for all 0: */
 	int num[MTRR_NUM_TYPES + 1];
 
-	/* check entries number */
+	/* Check entries number: */
 	memset(num, 0, sizeof(num));
 	for (i = 0; i < num_var_ranges; i++) {
 		type = range_state[i].type;
@@ -693,88 +696,86 @@ static int __init mtrr_need_cleanup(void)
 		num[type]++;
 	}
 
-	/* check if we got UC entries */
+	/* Check if we got UC entries: */
 	if (!num[MTRR_TYPE_UNCACHABLE])
 		return 0;
 
-	/* check if we only had WB and UC */
+	/* Check if we only had WB and UC */
 	if (num[MTRR_TYPE_WRBACK] + num[MTRR_TYPE_UNCACHABLE] !=
-		num_var_ranges - num[MTRR_NUM_TYPES])
+	    num_var_ranges - num[MTRR_NUM_TYPES])
 		return 0;
 
 	return 1;
 }
 
 static unsigned long __initdata range_sums;
-static void __init mtrr_calc_range_state(u64 chunk_size, u64 gran_size,
-					 unsigned long extra_remove_base,
-					 unsigned long extra_remove_size,
-					 int i)
+
+static void __init
+mtrr_calc_range_state(u64 chunk_size, u64 gran_size,
+		      unsigned long x_remove_base,
+		      unsigned long x_remove_size, int i)
 {
-	int num_reg;
 	static struct res_range range_new[RANGE_NUM];
-	static int nr_range_new;
 	unsigned long range_sums_new;
+	static int nr_range_new;
+	int num_reg;
 
-	/* convert ranges to var ranges state */
-	num_reg = x86_setup_var_mtrrs(range, nr_range,
-						chunk_size, gran_size);
+	/* Convert ranges to var ranges state: */
+	num_reg = x86_setup_var_mtrrs(range, nr_range, chunk_size, gran_size);
 
-	/* we got new setting in range_state, check it */
+	/* We got new setting in range_state, check it: */
 	memset(range_new, 0, sizeof(range_new));
 	nr_range_new = x86_get_mtrr_mem_range(range_new, 0,
-				extra_remove_base, extra_remove_size);
+				x_remove_base, x_remove_size);
 	range_sums_new = sum_ranges(range_new, nr_range_new);
 
 	result[i].chunk_sizek = chunk_size >> 10;
 	result[i].gran_sizek = gran_size >> 10;
 	result[i].num_reg = num_reg;
+
 	if (range_sums < range_sums_new) {
-		result[i].lose_cover_sizek =
-			(range_sums_new - range_sums) << PSHIFT;
+		result[i].lose_cover_sizek = (range_sums_new - range_sums) << PSHIFT;
 		result[i].bad = 1;
-	} else
-		result[i].lose_cover_sizek =
-			(range_sums - range_sums_new) << PSHIFT;
+	} else {
+		result[i].lose_cover_sizek = (range_sums - range_sums_new) << PSHIFT;
+	}
 
-	/* double check it */
+	/* Double check it: */
 	if (!result[i].bad && !result[i].lose_cover_sizek) {
-		if (nr_range_new != nr_range ||
-			memcmp(range, range_new, sizeof(range)))
-				result[i].bad = 1;
+		if (nr_range_new != nr_range || memcmp(range, range_new, sizeof(range)))
+			result[i].bad = 1;
 	}
 
-	if (!result[i].bad && (range_sums - range_sums_new <
-				min_loss_pfn[num_reg])) {
-		min_loss_pfn[num_reg] =
-			range_sums - range_sums_new;
-	}
+	if (!result[i].bad && (range_sums - range_sums_new < min_loss_pfn[num_reg]))
+		min_loss_pfn[num_reg] = range_sums - range_sums_new;
 }
 
 static void __init mtrr_print_out_one_result(int i)
 {
-	char gran_factor, chunk_factor, lose_factor;
 	unsigned long gran_base, chunk_base, lose_base;
+	char gran_factor, chunk_factor, lose_factor;
 
 	gran_base = to_size_factor(result[i].gran_sizek, &gran_factor),
 	chunk_base = to_size_factor(result[i].chunk_sizek, &chunk_factor),
 	lose_base = to_size_factor(result[i].lose_cover_sizek, &lose_factor),
-	printk(KERN_INFO "%sgran_size: %ld%c \tchunk_size: %ld%c \t",
-			result[i].bad ? "*BAD*" : " ",
-			gran_base, gran_factor, chunk_base, chunk_factor);
-	printk(KERN_CONT "num_reg: %d  \tlose cover RAM: %s%ld%c\n",
-			result[i].num_reg, result[i].bad ? "-" : "",
-			lose_base, lose_factor);
+
+	pr_info("%sgran_size: %ld%c \tchunk_size: %ld%c \t",
+		result[i].bad ? "*BAD*" : " ",
+		gran_base, gran_factor, chunk_base, chunk_factor);
+	pr_cont("num_reg: %d  \tlose cover RAM: %s%ld%c\n",
+		result[i].num_reg, result[i].bad ? "-" : "",
+		lose_base, lose_factor);
 }
 
 static int __init mtrr_search_optimal_index(void)
 {
-	int i;
 	int num_reg_good;
 	int index_good;
+	int i;
 
 	if (nr_mtrr_spare_reg >= num_var_ranges)
 		nr_mtrr_spare_reg = num_var_ranges - 1;
+
 	num_reg_good = -1;
 	for (i = num_var_ranges - nr_mtrr_spare_reg; i > 0; i--) {
 		if (!min_loss_pfn[i])
@@ -796,24 +797,24 @@ static int __init mtrr_search_optimal_index(void)
 	return index_good;
 }
 
-
 int __init mtrr_cleanup(unsigned address_bits)
 {
-	unsigned long extra_remove_base, extra_remove_size;
+	unsigned long x_remove_base, x_remove_size;
 	unsigned long base, size, def, dummy;
-	mtrr_type type;
 	u64 chunk_size, gran_size;
+	mtrr_type type;
 	int index_good;
 	int i;
 
 	if (!is_cpu(INTEL) || enable_mtrr_cleanup < 1)
 		return 0;
+
 	rdmsr(MSR_MTRRdefType, def, dummy);
 	def &= 0xff;
 	if (def != MTRR_TYPE_UNCACHABLE)
 		return 0;
 
-	/* get it and store it aside */
+	/* Get it and store it aside: */
 	memset(range_state, 0, sizeof(range_state));
 	for (i = 0; i < num_var_ranges; i++) {
 		mtrr_if->get(i, &base, &size, &type);
@@ -822,29 +823,28 @@ int __init mtrr_cleanup(unsigned address_bits)
 		range_state[i].type = type;
 	}
 
-	/* check if we need handle it and can handle it */
+	/* Check if we need handle it and can handle it: */
 	if (!mtrr_need_cleanup())
 		return 0;
 
-	/* print original var MTRRs at first, for debugging: */
+	/* Print original var MTRRs at first, for debugging: */
 	printk(KERN_DEBUG "original variable MTRRs\n");
 	print_out_mtrr_range_state();
 
 	memset(range, 0, sizeof(range));
-	extra_remove_size = 0;
-	extra_remove_base = 1 << (32 - PAGE_SHIFT);
+	x_remove_size = 0;
+	x_remove_base = 1 << (32 - PAGE_SHIFT);
 	if (mtrr_tom2)
-		extra_remove_size =
-			(mtrr_tom2 >> PAGE_SHIFT) - extra_remove_base;
-	nr_range = x86_get_mtrr_mem_range(range, 0, extra_remove_base,
-					  extra_remove_size);
+		x_remove_size = (mtrr_tom2 >> PAGE_SHIFT) - x_remove_base;
+
+	nr_range = x86_get_mtrr_mem_range(range, 0, x_remove_base, x_remove_size);
 	/*
-	 * [0, 1M) should always be coverred by var mtrr with WB
-	 * and fixed mtrrs should take effective before var mtrr for it
+	 * [0, 1M) should always be covered by var mtrr with WB
+	 * and fixed mtrrs should take effect before var mtrr for it:
 	 */
 	nr_range = add_range_with_merge(range, nr_range, 0,
 					(1ULL<<(20 - PAGE_SHIFT)) - 1);
-	/* sort the ranges */
+	/* Sort the ranges: */
 	sort(range, nr_range, sizeof(struct res_range), cmp_range, NULL);
 
 	range_sums = sum_ranges(range, nr_range);
@@ -854,7 +854,7 @@ int __init mtrr_cleanup(unsigned address_bits)
 	if (mtrr_chunk_size && mtrr_gran_size) {
 		i = 0;
 		mtrr_calc_range_state(mtrr_chunk_size, mtrr_gran_size,
-				      extra_remove_base, extra_remove_size, i);
+				      x_remove_base, x_remove_size, i);
 
 		mtrr_print_out_one_result(i);
 
@@ -880,7 +880,7 @@ int __init mtrr_cleanup(unsigned address_bits)
 				continue;
 
 			mtrr_calc_range_state(chunk_size, gran_size,
-				      extra_remove_base, extra_remove_size, i);
+				      x_remove_base, x_remove_size, i);
 			if (debug_print) {
 				mtrr_print_out_one_result(i);
 				printk(KERN_INFO "\n");
@@ -890,7 +890,7 @@ int __init mtrr_cleanup(unsigned address_bits)
 		}
 	}
 
-	/* try to find the optimal index */
+	/* Try to find the optimal index: */
 	index_good = mtrr_search_optimal_index();
 
 	if (index_good != -1) {
@@ -898,7 +898,7 @@ int __init mtrr_cleanup(unsigned address_bits)
 		i = index_good;
 		mtrr_print_out_one_result(i);
 
-		/* convert ranges to var ranges state */
+		/* Convert ranges to var ranges state: */
 		chunk_size = result[i].chunk_sizek;
 		chunk_size <<= 10;
 		gran_size = result[i].gran_sizek;
@@ -941,8 +941,8 @@ early_param("disable_mtrr_trim", disable_mtrr_trim_setup);
  * Note this won't check if the MTRRs < 4GB where the magic bit doesn't
  * apply to are wrong, but so far we don't know of any such case in the wild.
  */
-#define Tom2Enabled (1U << 21)
-#define Tom2ForceMemTypeWB (1U << 22)
+#define Tom2Enabled		(1U << 21)
+#define Tom2ForceMemTypeWB	(1U << 22)
 
 int __init amd_special_default_mtrr(void)
 {
@@ -952,7 +952,7 @@ int __init amd_special_default_mtrr(void)
 		return 0;
 	if (boot_cpu_data.x86 < 0xf || boot_cpu_data.x86 > 0x11)
 		return 0;
-	/* In case some hypervisor doesn't pass SYSCFG through */
+	/* In case some hypervisor doesn't pass SYSCFG through: */
 	if (rdmsr_safe(MSR_K8_SYSCFG, &l, &h) < 0)
 		return 0;
 	/*
@@ -965,19 +965,21 @@ int __init amd_special_default_mtrr(void)
 	return 0;
 }
 
-static u64 __init real_trim_memory(unsigned long start_pfn,
-				   unsigned long limit_pfn)
+static u64 __init
+real_trim_memory(unsigned long start_pfn, unsigned long limit_pfn)
 {
 	u64 trim_start, trim_size;
+
 	trim_start = start_pfn;
 	trim_start <<= PAGE_SHIFT;
+
 	trim_size = limit_pfn;
 	trim_size <<= PAGE_SHIFT;
 	trim_size -= trim_start;
 
-	return e820_update_range(trim_start, trim_size, E820_RAM,
-				E820_RESERVED);
+	return e820_update_range(trim_start, trim_size, E820_RAM, E820_RESERVED);
 }
+
 /**
  * mtrr_trim_uncached_memory - trim RAM not covered by MTRRs
  * @end_pfn: ending page frame number
@@ -985,7 +987,7 @@ static u64 __init real_trim_memory(unsigned long start_pfn,
  * Some buggy BIOSes don't setup the MTRRs properly for systems with certain
  * memory configurations.  This routine checks that the highest MTRR matches
  * the end of memory, to make sure the MTRRs having a write back type cover
- * all of the memory the kernel is intending to use. If not, it'll trim any
+ * all of the memory the kernel is intending to use.  If not, it'll trim any
  * memory off the end by adjusting end_pfn, removing it from the kernel's
  * allocation pools, warning the user with an obnoxious message.
  */
@@ -994,21 +996,22 @@ int __init mtrr_trim_uncached_memory(unsigned long end_pfn)
 	unsigned long i, base, size, highest_pfn = 0, def, dummy;
 	mtrr_type type;
 	u64 total_trim_size;
-
 	/* extra one for all 0 */
 	int num[MTRR_NUM_TYPES + 1];
+
 	/*
 	 * Make sure we only trim uncachable memory on machines that
 	 * support the Intel MTRR architecture:
 	 */
 	if (!is_cpu(INTEL) || disable_mtrr_trim)
 		return 0;
+
 	rdmsr(MSR_MTRRdefType, def, dummy);
 	def &= 0xff;
 	if (def != MTRR_TYPE_UNCACHABLE)
 		return 0;
 
-	/* get it and store it aside */
+	/* Get it and store it aside: */
 	memset(range_state, 0, sizeof(range_state));
 	for (i = 0; i < num_var_ranges; i++) {
 		mtrr_if->get(i, &base, &size, &type);
@@ -1017,7 +1020,7 @@ int __init mtrr_trim_uncached_memory(unsigned long end_pfn)
 		range_state[i].type = type;
 	}
 
-	/* Find highest cached pfn */
+	/* Find highest cached pfn: */
 	for (i = 0; i < num_var_ranges; i++) {
 		type = range_state[i].type;
 		if (type != MTRR_TYPE_WRBACK)
@@ -1028,13 +1031,13 @@ int __init mtrr_trim_uncached_memory(unsigned long end_pfn)
 			highest_pfn = base + size;
 	}
 
-	/* kvm/qemu doesn't have mtrr set right, don't trim them all */
+	/* kvm/qemu doesn't have mtrr set right, don't trim them all: */
 	if (!highest_pfn) {
 		printk(KERN_INFO "CPU MTRRs all blank - virtualized system.\n");
 		return 0;
 	}
 
-	/* check entries number */
+	/* Check entries number: */
 	memset(num, 0, sizeof(num));
 	for (i = 0; i < num_var_ranges; i++) {
 		type = range_state[i].type;
@@ -1046,11 +1049,11 @@ int __init mtrr_trim_uncached_memory(unsigned long end_pfn)
 		num[type]++;
 	}
 
-	/* no entry for WB? */
+	/* No entry for WB? */
 	if (!num[MTRR_TYPE_WRBACK])
 		return 0;
 
-	/* check if we only had WB and UC */
+	/* Check if we only had WB and UC: */
 	if (num[MTRR_TYPE_WRBACK] + num[MTRR_TYPE_UNCACHABLE] !=
 		num_var_ranges - num[MTRR_NUM_TYPES])
 		return 0;
@@ -1066,31 +1069,31 @@ int __init mtrr_trim_uncached_memory(unsigned long end_pfn)
 	}
 	nr_range = x86_get_mtrr_mem_range(range, nr_range, 0, 0);
 
+	/* Check the head: */
 	total_trim_size = 0;
-	/* check the head */
 	if (range[0].start)
 		total_trim_size += real_trim_memory(0, range[0].start);
-	/* check the holes */
+
+	/* Check the holes: */
 	for (i = 0; i < nr_range - 1; i++) {
 		if (range[i].end + 1 < range[i+1].start)
 			total_trim_size += real_trim_memory(range[i].end + 1,
 							    range[i+1].start);
 	}
-	/* check the top */
+
+	/* Check the top: */
 	i = nr_range - 1;
 	if (range[i].end + 1 < end_pfn)
 		total_trim_size += real_trim_memory(range[i].end + 1,
 							 end_pfn);
 
 	if (total_trim_size) {
-		printk(KERN_WARNING "WARNING: BIOS bug: CPU MTRRs don't cover"
-			" all of memory, losing %lluMB of RAM.\n",
-			total_trim_size >> 20);
+		pr_warning("WARNING: BIOS bug: CPU MTRRs don't cover all of memory, losing %lluMB of RAM.\n", total_trim_size >> 20);
 
 		if (!changed_by_mtrr_cleanup)
 			WARN_ON(1);
 
-		printk(KERN_INFO "update e820 for mtrr\n");
+		pr_info("update e820 for mtrr\n");
 		update_e820();
 
 		return 1;
@@ -1098,4 +1101,3 @@ int __init mtrr_trim_uncached_memory(unsigned long end_pfn)
 
 	return 0;
 }
-
-- 
cgit v1.2.3


From 2311037708c170977506fbcbe0a2ba0c6d221940 Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinder@kernel.org>
Date: Sat, 4 Jul 2009 07:52:08 +0530
Subject: x86: Clean up mtrr/cyrix.c

Fix trivial style problems:

  WARNING: Use #include <linux/io.h> instead of <asm/io.h>
  WARNING: line over 80 characters
  ERROR: do not initialise statics to 0 or NULL
  ERROR: space prohibited after that open parenthesis '(' X 2
  ERROR: space prohibited before that close parenthesis ')' X 2
  ERROR: trailing whitespace X 2
  ERROR: trailing statements should be on next line
  ERROR: do not use C99 // comments X 2

arch/x86/kernel/cpu/mtrr/cyrix.o:

   text	   data	    bss	    dec	    hex	filename
   1637	     32	      8	   1677	    68d	cyrix.o.before
   1637	     32	      8	   1677	    68d	cyrix.o.after

md5:
   6f52abd06905be3f4cabb5239f9b0ff0  cyrix.o.before.asm
   6f52abd06905be3f4cabb5239f9b0ff0  cyrix.o.after.asm

Suggested-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <20090703164225.GA21447@elte.hu>
[ Made the code more consistent ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/mtrr/cyrix.c | 94 ++++++++++++++++++++++------------------
 1 file changed, 51 insertions(+), 43 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/mtrr/cyrix.c b/arch/x86/kernel/cpu/mtrr/cyrix.c
index ff14c320040..228d982ce09 100644
--- a/arch/x86/kernel/cpu/mtrr/cyrix.c
+++ b/arch/x86/kernel/cpu/mtrr/cyrix.c
@@ -1,38 +1,40 @@
 #include <linux/init.h>
+#include <linux/io.h>
 #include <linux/mm.h>
-#include <asm/mtrr.h>
-#include <asm/msr.h>
-#include <asm/io.h>
+
 #include <asm/processor-cyrix.h>
 #include <asm/processor-flags.h>
+#include <asm/mtrr.h>
+#include <asm/msr.h>
+
 #include "mtrr.h"
 
 static void
 cyrix_get_arr(unsigned int reg, unsigned long *base,
 	      unsigned long *size, mtrr_type * type)
 {
-	unsigned long flags;
 	unsigned char arr, ccr3, rcr, shift;
+	unsigned long flags;
 
 	arr = CX86_ARR_BASE + (reg << 1) + reg;	/* avoid multiplication by 3 */
 
-	/* Save flags and disable interrupts */
 	local_irq_save(flags);
 
 	ccr3 = getCx86(CX86_CCR3);
 	setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10);	/* enable MAPEN */
-	((unsigned char *) base)[3] = getCx86(arr);
-	((unsigned char *) base)[2] = getCx86(arr + 1);
-	((unsigned char *) base)[1] = getCx86(arr + 2);
+	((unsigned char *)base)[3] = getCx86(arr);
+	((unsigned char *)base)[2] = getCx86(arr + 1);
+	((unsigned char *)base)[1] = getCx86(arr + 2);
 	rcr = getCx86(CX86_RCR_BASE + reg);
-	setCx86(CX86_CCR3, ccr3);	/* disable MAPEN */
+	setCx86(CX86_CCR3, ccr3);			/* disable MAPEN */
 
-	/* Enable interrupts if it was enabled previously */
 	local_irq_restore(flags);
+
 	shift = ((unsigned char *) base)[1] & 0x0f;
 	*base >>= PAGE_SHIFT;
 
-	/* Power of two, at least 4K on ARR0-ARR6, 256K on ARR7
+	/*
+	 * Power of two, at least 4K on ARR0-ARR6, 256K on ARR7
 	 * Note: shift==0xf means 4G, this is unsupported.
 	 */
 	if (shift)
@@ -76,17 +78,20 @@ cyrix_get_arr(unsigned int reg, unsigned long *base,
 	}
 }
 
+/*
+ * cyrix_get_free_region - get a free ARR.
+ *
+ * @base: the starting (base) address of the region.
+ * @size: the size (in bytes) of the region.
+ *
+ * Returns: the index of the region on success, else -1 on error.
+*/
 static int
 cyrix_get_free_region(unsigned long base, unsigned long size, int replace_reg)
-/*  [SUMMARY] Get a free ARR.
-    <base> The starting (base) address of the region.
-    <size> The size (in bytes) of the region.
-    [RETURNS] The index of the region on success, else -1 on error.
-*/
 {
-	int i;
-	mtrr_type ltype;
 	unsigned long lbase, lsize;
+	mtrr_type ltype;
+	int i;
 
 	switch (replace_reg) {
 	case 7:
@@ -107,14 +112,17 @@ cyrix_get_free_region(unsigned long base, unsigned long size, int replace_reg)
 		cyrix_get_arr(7, &lbase, &lsize, &ltype);
 		if (lsize == 0)
 			return 7;
-		/*  Else try ARR0-ARR6 first  */
+		/* Else try ARR0-ARR6 first  */
 	} else {
 		for (i = 0; i < 7; i++) {
 			cyrix_get_arr(i, &lbase, &lsize, &ltype);
 			if (lsize == 0)
 				return i;
 		}
-		/* ARR0-ARR6 isn't free, try ARR7 but its size must be at least 256K */
+		/*
+		 * ARR0-ARR6 isn't free
+		 * try ARR7 but its size must be at least 256K
+		 */
 		cyrix_get_arr(i, &lbase, &lsize, &ltype);
 		if ((lsize == 0) && (size >= 0x40))
 			return i;
@@ -122,21 +130,22 @@ cyrix_get_free_region(unsigned long base, unsigned long size, int replace_reg)
 	return -ENOSPC;
 }
 
-static u32 cr4 = 0;
-static u32 ccr3;
+static u32 cr4, ccr3;
 
 static void prepare_set(void)
 {
 	u32 cr0;
 
 	/*  Save value of CR4 and clear Page Global Enable (bit 7)  */
-	if ( cpu_has_pge ) {
+	if (cpu_has_pge) {
 		cr4 = read_cr4();
 		write_cr4(cr4 & ~X86_CR4_PGE);
 	}
 
-	/*  Disable and flush caches. Note that wbinvd flushes the TLBs as
-	    a side-effect  */
+	/*
+	 * Disable and flush caches.
+	 * Note that wbinvd flushes the TLBs as a side-effect
+	 */
 	cr0 = read_cr0() | X86_CR0_CD;
 	wbinvd();
 	write_cr0(cr0);
@@ -147,22 +156,21 @@ static void prepare_set(void)
 
 	/* Cyrix ARRs - everything else was excluded at the top */
 	setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10);
-
 }
 
 static void post_set(void)
 {
-	/*  Flush caches and TLBs  */
+	/* Flush caches and TLBs */
 	wbinvd();
 
 	/* Cyrix ARRs - everything else was excluded at the top */
 	setCx86(CX86_CCR3, ccr3);
-		
-	/*  Enable caches  */
+
+	/* Enable caches */
 	write_cr0(read_cr0() & 0xbfffffff);
 
-	/*  Restore value of CR4  */
-	if ( cpu_has_pge )
+	/* Restore value of CR4 */
+	if (cpu_has_pge)
 		write_cr4(cr4);
 }
 
@@ -178,7 +186,8 @@ static void cyrix_set_arr(unsigned int reg, unsigned long base,
 		size >>= 6;
 
 	size &= 0x7fff;		/* make sure arr_size <= 14 */
-	for (arr_size = 0; size; arr_size++, size >>= 1) ;
+	for (arr_size = 0; size; arr_size++, size >>= 1)
+		;
 
 	if (reg < 7) {
 		switch (type) {
@@ -215,18 +224,18 @@ static void cyrix_set_arr(unsigned int reg, unsigned long base,
 	prepare_set();
 
 	base <<= PAGE_SHIFT;
-	setCx86(arr, ((unsigned char *) &base)[3]);
-	setCx86(arr + 1, ((unsigned char *) &base)[2]);
-	setCx86(arr + 2, (((unsigned char *) &base)[1]) | arr_size);
+	setCx86(arr + 0,  ((unsigned char *)&base)[3]);
+	setCx86(arr + 1,  ((unsigned char *)&base)[2]);
+	setCx86(arr + 2, (((unsigned char *)&base)[1]) | arr_size);
 	setCx86(CX86_RCR_BASE + reg, arr_type);
 
 	post_set();
 }
 
 typedef struct {
-	unsigned long base;
-	unsigned long size;
-	mtrr_type type;
+	unsigned long	base;
+	unsigned long	size;
+	mtrr_type	type;
 } arr_state_t;
 
 static arr_state_t arr_state[8] = {
@@ -247,16 +256,17 @@ static void cyrix_set_all(void)
 		setCx86(CX86_CCR0 + i, ccr_state[i]);
 	for (; i < 7; i++)
 		setCx86(CX86_CCR4 + i, ccr_state[i]);
-	for (i = 0; i < 8; i++)
-		cyrix_set_arr(i, arr_state[i].base, 
+
+	for (i = 0; i < 8; i++) {
+		cyrix_set_arr(i, arr_state[i].base,
 			      arr_state[i].size, arr_state[i].type);
+	}
 
 	post_set();
 }
 
 static struct mtrr_ops cyrix_mtrr_ops = {
 	.vendor            = X86_VENDOR_CYRIX,
-//	.init              = cyrix_arr_init,
 	.set_all	   = cyrix_set_all,
 	.set               = cyrix_set_arr,
 	.get               = cyrix_get_arr,
@@ -270,5 +280,3 @@ int __init cyrix_init_mtrr(void)
 	set_mtrr_ops(&cyrix_mtrr_ops);
 	return 0;
 }
-
-//arch_initcall(cyrix_init_mtrr);
-- 
cgit v1.2.3


From a1a499a39911fcfecbebaba1f38588088909f918 Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinder@kernel.org>
Date: Sat, 4 Jul 2009 07:53:00 +0530
Subject: x86: Clean up mtrr/generic.c

Fix following trivial style problems:

  ERROR: trailing whitespace X 4
  WARNING: Use #include <linux/io.h> instead of <asm/io.h>
  WARNING: braces {} are not necessary for single statement blocks X 3
  ERROR: "foo * bar" should be "foo *bar"
  WARNING: line over 80 characters X 6
  ERROR: "foo * bar" should be "foo *bar"
  ERROR: spaces required around that '=' (ctx:VxO)
  ERROR: space required before that '-' (ctx:OxV)
  WARNING: suspect code indent for conditional statements (8, 12)
  ERROR: spaces required around that '=' (ctx:VxV)
  ERROR: do not initialise statics to 0 or NULL
  ERROR: space prohibited after that open parenthesis '(' X 2
  ERROR: space prohibited before that close parenthesis ')' X 2
  ERROR: trailing statements should be on next line
  ERROR: return is not a function, parentheses are not required

Also use pr_debug and pr_warning where possible.

arch/x86/kernel/cpu/mtrr/generic.o:

   text	   data	    bss	    dec	    hex	filename
   5652	     77	   4224	   9953	   26e1	generic.o.before
   5652	     77	   4220	   9949	   26dd	generic.o.after

The md5 changed:
   b34d6c045f06daa4ed092b90cc760e8f  generic.o.before.asm
   a490c6251cfd8442fbffecc0e09a573d  generic.o.after.asm

Because mtrr_state moved from data to bss, changing its
offsets - and also because __LINE__ numbers changed.

Suggested-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <20090703164225.GA21447@elte.hu>
[ Further cleanups to make the code more consistent ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/mtrr/generic.c | 304 +++++++++++++++++++++----------------
 1 file changed, 169 insertions(+), 135 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/mtrr/generic.c b/arch/x86/kernel/cpu/mtrr/generic.c
index 0543f69f0b2..55da0c5f68d 100644
--- a/arch/x86/kernel/cpu/mtrr/generic.c
+++ b/arch/x86/kernel/cpu/mtrr/generic.c
@@ -1,28 +1,34 @@
-/* This only handles 32bit MTRR on 32bit hosts. This is strictly wrong
-   because MTRRs can span upto 40 bits (36bits on most modern x86) */ 
+/*
+ * This only handles 32bit MTRR on 32bit hosts. This is strictly wrong
+ * because MTRRs can span upto 40 bits (36bits on most modern x86)
+ */
+#define DEBUG
+
+#include <linux/module.h>
 #include <linux/init.h>
 #include <linux/slab.h>
+#include <linux/io.h>
 #include <linux/mm.h>
-#include <linux/module.h>
-#include <asm/io.h>
-#include <asm/mtrr.h>
-#include <asm/msr.h>
-#include <asm/system.h>
-#include <asm/cpufeature.h>
+
 #include <asm/processor-flags.h>
+#include <asm/cpufeature.h>
 #include <asm/tlbflush.h>
+#include <asm/system.h>
+#include <asm/mtrr.h>
+#include <asm/msr.h>
 #include <asm/pat.h>
+
 #include "mtrr.h"
 
 struct fixed_range_block {
-	int base_msr; /* start address of an MTRR block */
-	int ranges;   /* number of MTRRs in this block  */
+	int base_msr;		/* start address of an MTRR block */
+	int ranges;		/* number of MTRRs in this block  */
 };
 
 static struct fixed_range_block fixed_range_blocks[] = {
-	{ MSR_MTRRfix64K_00000, 1 }, /* one  64k MTRR  */
-	{ MSR_MTRRfix16K_80000, 2 }, /* two  16k MTRRs */
-	{ MSR_MTRRfix4K_C0000,  8 }, /* eight 4k MTRRs */
+	{ MSR_MTRRfix64K_00000, 1 }, /* one   64k MTRR  */
+	{ MSR_MTRRfix16K_80000, 2 }, /* two   16k MTRRs */
+	{ MSR_MTRRfix4K_C0000,  8 }, /* eight  4k MTRRs */
 	{}
 };
 
@@ -30,10 +36,10 @@ static unsigned long smp_changes_mask;
 static int mtrr_state_set;
 u64 mtrr_tom2;
 
-struct mtrr_state_type mtrr_state = {};
+struct mtrr_state_type mtrr_state;
 EXPORT_SYMBOL_GPL(mtrr_state);
 
-/**
+/*
  * BIOS is expected to clear MtrrFixDramModEn bit, see for example
  * "BIOS and Kernel Developer's Guide for the AMD Athlon 64 and AMD
  * Opteron Processors" (26094 Rev. 3.30 February 2006), section
@@ -104,9 +110,8 @@ u8 mtrr_type_lookup(u64 start, u64 end)
 	 * Look of multiple ranges matching this address and pick type
 	 * as per MTRR precedence
 	 */
-	if (!(mtrr_state.enabled & 2)) {
+	if (!(mtrr_state.enabled & 2))
 		return mtrr_state.def_type;
-	}
 
 	prev_match = 0xFF;
 	for (i = 0; i < num_var_ranges; ++i) {
@@ -125,9 +130,8 @@ u8 mtrr_type_lookup(u64 start, u64 end)
 		if (start_state != end_state)
 			return 0xFE;
 
-		if ((start & mask) != (base & mask)) {
+		if ((start & mask) != (base & mask))
 			continue;
-		}
 
 		curr_match = mtrr_state.var_ranges[i].base_lo & 0xff;
 		if (prev_match == 0xFF) {
@@ -148,9 +152,8 @@ u8 mtrr_type_lookup(u64 start, u64 end)
 			curr_match = MTRR_TYPE_WRTHROUGH;
 		}
 
-		if (prev_match != curr_match) {
+		if (prev_match != curr_match)
 			return MTRR_TYPE_UNCACHABLE;
-		}
 	}
 
 	if (mtrr_tom2) {
@@ -164,7 +167,7 @@ u8 mtrr_type_lookup(u64 start, u64 end)
 	return mtrr_state.def_type;
 }
 
-/*  Get the MSR pair relating to a var range  */
+/* Get the MSR pair relating to a var range */
 static void
 get_mtrr_var_range(unsigned int index, struct mtrr_var_range *vr)
 {
@@ -172,7 +175,7 @@ get_mtrr_var_range(unsigned int index, struct mtrr_var_range *vr)
 	rdmsr(MTRRphysMask_MSR(index), vr->mask_lo, vr->mask_hi);
 }
 
-/*  fill the MSR pair relating to a var range  */
+/* Fill the MSR pair relating to a var range */
 void fill_mtrr_var_range(unsigned int index,
 		u32 base_lo, u32 base_hi, u32 mask_lo, u32 mask_hi)
 {
@@ -186,10 +189,9 @@ void fill_mtrr_var_range(unsigned int index,
 	vr[index].mask_hi = mask_hi;
 }
 
-static void
-get_fixed_ranges(mtrr_type * frs)
+static void get_fixed_ranges(mtrr_type *frs)
 {
-	unsigned int *p = (unsigned int *) frs;
+	unsigned int *p = (unsigned int *)frs;
 	int i;
 
 	k8_check_syscfg_dram_mod_en();
@@ -217,22 +219,22 @@ static void __init print_fixed_last(void)
 	if (!last_fixed_end)
 		return;
 
-	printk(KERN_DEBUG "  %05X-%05X %s\n", last_fixed_start,
-		last_fixed_end - 1, mtrr_attrib_to_str(last_fixed_type));
+	pr_debug("  %05X-%05X %s\n", last_fixed_start,
+		 last_fixed_end - 1, mtrr_attrib_to_str(last_fixed_type));
 
 	last_fixed_end = 0;
 }
 
 static void __init update_fixed_last(unsigned base, unsigned end,
-				       mtrr_type type)
+				     mtrr_type type)
 {
 	last_fixed_start = base;
 	last_fixed_end = end;
 	last_fixed_type = type;
 }
 
-static void __init print_fixed(unsigned base, unsigned step,
-			       const mtrr_type *types)
+static void __init
+print_fixed(unsigned base, unsigned step, const mtrr_type *types)
 {
 	unsigned i;
 
@@ -259,54 +261,55 @@ static void __init print_mtrr_state(void)
 	unsigned int i;
 	int high_width;
 
-	printk(KERN_DEBUG "MTRR default type: %s\n",
-			 mtrr_attrib_to_str(mtrr_state.def_type));
+	pr_debug("MTRR default type: %s\n",
+		 mtrr_attrib_to_str(mtrr_state.def_type));
 	if (mtrr_state.have_fixed) {
-		printk(KERN_DEBUG "MTRR fixed ranges %sabled:\n",
-		       mtrr_state.enabled & 1 ? "en" : "dis");
+		pr_debug("MTRR fixed ranges %sabled:\n",
+			 mtrr_state.enabled & 1 ? "en" : "dis");
 		print_fixed(0x00000, 0x10000, mtrr_state.fixed_ranges + 0);
 		for (i = 0; i < 2; ++i)
-			print_fixed(0x80000 + i * 0x20000, 0x04000, mtrr_state.fixed_ranges + (i + 1) * 8);
+			print_fixed(0x80000 + i * 0x20000, 0x04000,
+				    mtrr_state.fixed_ranges + (i + 1) * 8);
 		for (i = 0; i < 8; ++i)
-			print_fixed(0xC0000 + i * 0x08000, 0x01000, mtrr_state.fixed_ranges + (i + 3) * 8);
+			print_fixed(0xC0000 + i * 0x08000, 0x01000,
+				    mtrr_state.fixed_ranges + (i + 3) * 8);
 
 		/* tail */
 		print_fixed_last();
 	}
-	printk(KERN_DEBUG "MTRR variable ranges %sabled:\n",
-	       mtrr_state.enabled & 2 ? "en" : "dis");
+	pr_debug("MTRR variable ranges %sabled:\n",
+		 mtrr_state.enabled & 2 ? "en" : "dis");
 	if (size_or_mask & 0xffffffffUL)
 		high_width = ffs(size_or_mask & 0xffffffffUL) - 1;
 	else
 		high_width = ffs(size_or_mask>>32) + 32 - 1;
 	high_width = (high_width - (32 - PAGE_SHIFT) + 3) / 4;
+
 	for (i = 0; i < num_var_ranges; ++i) {
 		if (mtrr_state.var_ranges[i].mask_lo & (1 << 11))
-			printk(KERN_DEBUG "  %u base %0*X%05X000 mask %0*X%05X000 %s\n",
-			       i,
-			       high_width,
-			       mtrr_state.var_ranges[i].base_hi,
-			       mtrr_state.var_ranges[i].base_lo >> 12,
-			       high_width,
-			       mtrr_state.var_ranges[i].mask_hi,
-			       mtrr_state.var_ranges[i].mask_lo >> 12,
-			       mtrr_attrib_to_str(mtrr_state.var_ranges[i].base_lo & 0xff));
+			pr_debug("  %u base %0*X%05X000 mask %0*X%05X000 %s\n",
+				 i,
+				 high_width,
+				 mtrr_state.var_ranges[i].base_hi,
+				 mtrr_state.var_ranges[i].base_lo >> 12,
+				 high_width,
+				 mtrr_state.var_ranges[i].mask_hi,
+				 mtrr_state.var_ranges[i].mask_lo >> 12,
+				 mtrr_attrib_to_str(mtrr_state.var_ranges[i].base_lo & 0xff));
 		else
-			printk(KERN_DEBUG "  %u disabled\n", i);
-	}
-	if (mtrr_tom2) {
-		printk(KERN_DEBUG "TOM2: %016llx aka %lldM\n",
-				  mtrr_tom2, mtrr_tom2>>20);
+			pr_debug("  %u disabled\n", i);
 	}
+	if (mtrr_tom2)
+		pr_debug("TOM2: %016llx aka %lldM\n", mtrr_tom2, mtrr_tom2>>20);
 }
 
-/*  Grab all of the MTRR state for this CPU into *state  */
+/* Grab all of the MTRR state for this CPU into *state */
 void __init get_mtrr_state(void)
 {
-	unsigned int i;
 	struct mtrr_var_range *vrs;
-	unsigned lo, dummy;
 	unsigned long flags;
+	unsigned lo, dummy;
+	unsigned int i;
 
 	vrs = mtrr_state.var_ranges;
 
@@ -324,6 +327,7 @@ void __init get_mtrr_state(void)
 
 	if (amd_special_default_mtrr()) {
 		unsigned low, high;
+
 		/* TOP_MEM2 */
 		rdmsr(MSR_K8_TOP_MEM2, low, high);
 		mtrr_tom2 = high;
@@ -344,10 +348,9 @@ void __init get_mtrr_state(void)
 
 	post_set();
 	local_irq_restore(flags);
-
 }
 
-/*  Some BIOS's are fucked and don't set all MTRRs the same!  */
+/* Some BIOS's are messed up and don't set all MTRRs the same! */
 void __init mtrr_state_warn(void)
 {
 	unsigned long mask = smp_changes_mask;
@@ -355,28 +358,33 @@ void __init mtrr_state_warn(void)
 	if (!mask)
 		return;
 	if (mask & MTRR_CHANGE_MASK_FIXED)
-		printk(KERN_WARNING "mtrr: your CPUs had inconsistent fixed MTRR settings\n");
+		pr_warning("mtrr: your CPUs had inconsistent fixed MTRR settings\n");
 	if (mask & MTRR_CHANGE_MASK_VARIABLE)
-		printk(KERN_WARNING "mtrr: your CPUs had inconsistent variable MTRR settings\n");
+		pr_warning("mtrr: your CPUs had inconsistent variable MTRR settings\n");
 	if (mask & MTRR_CHANGE_MASK_DEFTYPE)
-		printk(KERN_WARNING "mtrr: your CPUs had inconsistent MTRRdefType settings\n");
+		pr_warning("mtrr: your CPUs had inconsistent MTRRdefType settings\n");
+
 	printk(KERN_INFO "mtrr: probably your BIOS does not setup all CPUs.\n");
 	printk(KERN_INFO "mtrr: corrected configuration.\n");
 }
 
-/* Doesn't attempt to pass an error out to MTRR users
-   because it's quite complicated in some cases and probably not
-   worth it because the best error handling is to ignore it. */
+/*
+ * Doesn't attempt to pass an error out to MTRR users
+ * because it's quite complicated in some cases and probably not
+ * worth it because the best error handling is to ignore it.
+ */
 void mtrr_wrmsr(unsigned msr, unsigned a, unsigned b)
 {
-	if (wrmsr_safe(msr, a, b) < 0)
+	if (wrmsr_safe(msr, a, b) < 0) {
 		printk(KERN_ERR
 			"MTRR: CPU %u: Writing MSR %x to %x:%x failed\n",
 			smp_processor_id(), msr, a, b);
+	}
 }
 
 /**
- * set_fixed_range - checks & updates a fixed-range MTRR if it differs from the value it should have
+ * set_fixed_range - checks & updates a fixed-range MTRR if it
+ *		     differs from the value it should have
  * @msr: MSR address of the MTTR which should be checked and updated
  * @changed: pointer which indicates whether the MTRR needed to be changed
  * @msrwords: pointer to the MSR values which the MSR should have
@@ -401,20 +409,23 @@ static void set_fixed_range(int msr, bool *changed, unsigned int *msrwords)
  *
  * Returns: The index of the region on success, else negative on error.
  */
-int generic_get_free_region(unsigned long base, unsigned long size, int replace_reg)
+int
+generic_get_free_region(unsigned long base, unsigned long size, int replace_reg)
 {
-	int i, max;
-	mtrr_type ltype;
 	unsigned long lbase, lsize;
+	mtrr_type ltype;
+	int i, max;
 
 	max = num_var_ranges;
 	if (replace_reg >= 0 && replace_reg < max)
 		return replace_reg;
+
 	for (i = 0; i < max; ++i) {
 		mtrr_if->get(i, &lbase, &lsize, &ltype);
 		if (lsize == 0)
 			return i;
 	}
+
 	return -ENOSPC;
 }
 
@@ -434,7 +445,7 @@ static void generic_get_mtrr(unsigned int reg, unsigned long *base,
 	rdmsr(MTRRphysMask_MSR(reg), mask_lo, mask_hi);
 
 	if ((mask_lo & 0x800) == 0) {
-		/*  Invalid (i.e. free) range  */
+		/*  Invalid (i.e. free) range */
 		*base = 0;
 		*size = 0;
 		*type = 0;
@@ -471,27 +482,31 @@ out_put_cpu:
 }
 
 /**
- * set_fixed_ranges - checks & updates the fixed-range MTRRs if they differ from the saved set
+ * set_fixed_ranges - checks & updates the fixed-range MTRRs if they
+ *		      differ from the saved set
  * @frs: pointer to fixed-range MTRR values, saved by get_fixed_ranges()
  */
-static int set_fixed_ranges(mtrr_type * frs)
+static int set_fixed_ranges(mtrr_type *frs)
 {
-	unsigned long long *saved = (unsigned long long *) frs;
+	unsigned long long *saved = (unsigned long long *)frs;
 	bool changed = false;
-	int block=-1, range;
+	int block = -1, range;
 
 	k8_check_syscfg_dram_mod_en();
 
-	while (fixed_range_blocks[++block].ranges)
-	    for (range=0; range < fixed_range_blocks[block].ranges; range++)
-		set_fixed_range(fixed_range_blocks[block].base_msr + range,
-		    &changed, (unsigned int *) saved++);
+	while (fixed_range_blocks[++block].ranges) {
+		for (range = 0; range < fixed_range_blocks[block].ranges; range++)
+			set_fixed_range(fixed_range_blocks[block].base_msr + range,
+					&changed, (unsigned int *)saved++);
+	}
 
 	return changed;
 }
 
-/*  Set the MSR pair relating to a var range. Returns TRUE if
-    changes are made  */
+/*
+ * Set the MSR pair relating to a var range.
+ * Returns true if changes are made.
+ */
 static bool set_mtrr_var_ranges(unsigned int index, struct mtrr_var_range *vr)
 {
 	unsigned int lo, hi;
@@ -501,6 +516,7 @@ static bool set_mtrr_var_ranges(unsigned int index, struct mtrr_var_range *vr)
 	if ((vr->base_lo & 0xfffff0ffUL) != (lo & 0xfffff0ffUL)
 	    || (vr->base_hi & (size_and_mask >> (32 - PAGE_SHIFT))) !=
 		(hi & (size_and_mask >> (32 - PAGE_SHIFT)))) {
+
 		mtrr_wrmsr(MTRRphysBase_MSR(index), vr->base_lo, vr->base_hi);
 		changed = true;
 	}
@@ -526,21 +542,26 @@ static u32 deftype_lo, deftype_hi;
  */
 static unsigned long set_mtrr_state(void)
 {
-	unsigned int i;
 	unsigned long change_mask = 0;
+	unsigned int i;
 
-	for (i = 0; i < num_var_ranges; i++)
+	for (i = 0; i < num_var_ranges; i++) {
 		if (set_mtrr_var_ranges(i, &mtrr_state.var_ranges[i]))
 			change_mask |= MTRR_CHANGE_MASK_VARIABLE;
+	}
 
 	if (mtrr_state.have_fixed && set_fixed_ranges(mtrr_state.fixed_ranges))
 		change_mask |= MTRR_CHANGE_MASK_FIXED;
 
-	/*  Set_mtrr_restore restores the old value of MTRRdefType,
-	   so to set it we fiddle with the saved value  */
+	/*
+	 * Set_mtrr_restore restores the old value of MTRRdefType,
+	 * so to set it we fiddle with the saved value:
+	 */
 	if ((deftype_lo & 0xff) != mtrr_state.def_type
 	    || ((deftype_lo & 0xc00) >> 10) != mtrr_state.enabled) {
-		deftype_lo = (deftype_lo & ~0xcff) | mtrr_state.def_type | (mtrr_state.enabled << 10);
+
+		deftype_lo = (deftype_lo & ~0xcff) | mtrr_state.def_type |
+			     (mtrr_state.enabled << 10);
 		change_mask |= MTRR_CHANGE_MASK_DEFTYPE;
 	}
 
@@ -548,33 +569,36 @@ static unsigned long set_mtrr_state(void)
 }
 
 
-static unsigned long cr4 = 0;
+static unsigned long cr4;
 static DEFINE_SPINLOCK(set_atomicity_lock);
 
 /*
- * Since we are disabling the cache don't allow any interrupts - they
- * would run extremely slow and would only increase the pain.  The caller must
- * ensure that local interrupts are disabled and are reenabled after post_set()
- * has been called.
+ * Since we are disabling the cache don't allow any interrupts,
+ * they would run extremely slow and would only increase the pain.
+ *
+ * The caller must ensure that local interrupts are disabled and
+ * are reenabled after post_set() has been called.
  */
-
 static void prepare_set(void) __acquires(set_atomicity_lock)
 {
 	unsigned long cr0;
 
-	/*  Note that this is not ideal, since the cache is only flushed/disabled
-	   for this CPU while the MTRRs are changed, but changing this requires
-	   more invasive changes to the way the kernel boots  */
+	/*
+	 * Note that this is not ideal
+	 * since the cache is only flushed/disabled for this CPU while the
+	 * MTRRs are changed, but changing this requires more invasive
+	 * changes to the way the kernel boots
+	 */
 
 	spin_lock(&set_atomicity_lock);
 
-	/*  Enter the no-fill (CD=1, NW=0) cache mode and flush caches. */
+	/* Enter the no-fill (CD=1, NW=0) cache mode and flush caches. */
 	cr0 = read_cr0() | X86_CR0_CD;
 	write_cr0(cr0);
 	wbinvd();
 
-	/*  Save value of CR4 and clear Page Global Enable (bit 7)  */
-	if ( cpu_has_pge ) {
+	/* Save value of CR4 and clear Page Global Enable (bit 7) */
+	if (cpu_has_pge) {
 		cr4 = read_cr4();
 		write_cr4(cr4 & ~X86_CR4_PGE);
 	}
@@ -582,26 +606,26 @@ static void prepare_set(void) __acquires(set_atomicity_lock)
 	/* Flush all TLBs via a mov %cr3, %reg; mov %reg, %cr3 */
 	__flush_tlb();
 
-	/*  Save MTRR state */
+	/* Save MTRR state */
 	rdmsr(MSR_MTRRdefType, deftype_lo, deftype_hi);
 
-	/*  Disable MTRRs, and set the default type to uncached  */
+	/* Disable MTRRs, and set the default type to uncached */
 	mtrr_wrmsr(MSR_MTRRdefType, deftype_lo & ~0xcff, deftype_hi);
 }
 
 static void post_set(void) __releases(set_atomicity_lock)
 {
-	/*  Flush TLBs (no need to flush caches - they are disabled)  */
+	/* Flush TLBs (no need to flush caches - they are disabled) */
 	__flush_tlb();
 
 	/* Intel (P6) standard MTRRs */
 	mtrr_wrmsr(MSR_MTRRdefType, deftype_lo, deftype_hi);
-		
-	/*  Enable caches  */
+
+	/* Enable caches */
 	write_cr0(read_cr0() & 0xbfffffff);
 
-	/*  Restore value of CR4  */
-	if ( cpu_has_pge )
+	/* Restore value of CR4 */
+	if (cpu_has_pge)
 		write_cr4(cr4);
 	spin_unlock(&set_atomicity_lock);
 }
@@ -623,24 +647,27 @@ static void generic_set_all(void)
 	post_set();
 	local_irq_restore(flags);
 
-	/*  Use the atomic bitops to update the global mask  */
+	/* Use the atomic bitops to update the global mask */
 	for (count = 0; count < sizeof mask * 8; ++count) {
 		if (mask & 0x01)
 			set_bit(count, &smp_changes_mask);
 		mask >>= 1;
 	}
-	
+
 }
 
+/**
+ * generic_set_mtrr - set variable MTRR register on the local CPU.
+ *
+ * @reg: The register to set.
+ * @base: The base address of the region.
+ * @size: The size of the region. If this is 0 the region is disabled.
+ * @type: The type of the region.
+ *
+ * Returns nothing.
+ */
 static void generic_set_mtrr(unsigned int reg, unsigned long base,
 			     unsigned long size, mtrr_type type)
-/*  [SUMMARY] Set variable MTRR register on the local CPU.
-    <reg> The register to set.
-    <base> The base address of the region.
-    <size> The size of the region. If this is 0 the region is disabled.
-    <type> The type of the region.
-    [RETURNS] Nothing.
-*/
 {
 	unsigned long flags;
 	struct mtrr_var_range *vr;
@@ -651,8 +678,10 @@ static void generic_set_mtrr(unsigned int reg, unsigned long base,
 	prepare_set();
 
 	if (size == 0) {
-		/* The invalid bit is kept in the mask, so we simply clear the
-		   relevant mask register to disable a range. */
+		/*
+		 * The invalid bit is kept in the mask, so we simply
+		 * clear the relevant mask register to disable a range.
+		 */
 		mtrr_wrmsr(MTRRphysMask_MSR(reg), 0, 0);
 		memset(vr, 0, sizeof(struct mtrr_var_range));
 	} else {
@@ -669,46 +698,50 @@ static void generic_set_mtrr(unsigned int reg, unsigned long base,
 	local_irq_restore(flags);
 }
 
-int generic_validate_add_page(unsigned long base, unsigned long size, unsigned int type)
+int generic_validate_add_page(unsigned long base, unsigned long size,
+			      unsigned int type)
 {
 	unsigned long lbase, last;
 
-	/*  For Intel PPro stepping <= 7, must be 4 MiB aligned 
-	    and not touch 0x70000000->0x7003FFFF */
+	/*
+	 * For Intel PPro stepping <= 7
+	 * must be 4 MiB aligned and not touch 0x70000000 -> 0x7003FFFF
+	 */
 	if (is_cpu(INTEL) && boot_cpu_data.x86 == 6 &&
 	    boot_cpu_data.x86_model == 1 &&
 	    boot_cpu_data.x86_mask <= 7) {
 		if (base & ((1 << (22 - PAGE_SHIFT)) - 1)) {
-			printk(KERN_WARNING "mtrr: base(0x%lx000) is not 4 MiB aligned\n", base);
+			pr_warning("mtrr: base(0x%lx000) is not 4 MiB aligned\n", base);
 			return -EINVAL;
 		}
 		if (!(base + size < 0x70000 || base > 0x7003F) &&
 		    (type == MTRR_TYPE_WRCOMB
 		     || type == MTRR_TYPE_WRBACK)) {
-			printk(KERN_WARNING "mtrr: writable mtrr between 0x70000000 and 0x7003FFFF may hang the CPU.\n");
+			pr_warning("mtrr: writable mtrr between 0x70000000 and 0x7003FFFF may hang the CPU.\n");
 			return -EINVAL;
 		}
 	}
 
-	/*  Check upper bits of base and last are equal and lower bits are 0
-	    for base and 1 for last  */
+	/*
+	 * Check upper bits of base and last are equal and lower bits are 0
+	 * for base and 1 for last
+	 */
 	last = base + size - 1;
 	for (lbase = base; !(lbase & 1) && (last & 1);
-	     lbase = lbase >> 1, last = last >> 1) ;
+	     lbase = lbase >> 1, last = last >> 1)
+		;
 	if (lbase != last) {
-		printk(KERN_WARNING "mtrr: base(0x%lx000) is not aligned on a size(0x%lx000) boundary\n",
-		       base, size);
+		pr_warning("mtrr: base(0x%lx000) is not aligned on a size(0x%lx000) boundary\n", base, size);
 		return -EINVAL;
 	}
 	return 0;
 }
 
-
 static int generic_have_wrcomb(void)
 {
 	unsigned long config, dummy;
 	rdmsr(MSR_MTRRcap, config, dummy);
-	return (config & (1 << 10));
+	return config & (1 << 10);
 }
 
 int positive_have_wrcomb(void)
@@ -716,14 +749,15 @@ int positive_have_wrcomb(void)
 	return 1;
 }
 
-/* generic structure...
+/*
+ * Generic structure...
  */
 struct mtrr_ops generic_mtrr_ops = {
-	.use_intel_if      = 1,
-	.set_all	   = generic_set_all,
-	.get               = generic_get_mtrr,
-	.get_free_region   = generic_get_free_region,
-	.set               = generic_set_mtrr,
-	.validate_add_page = generic_validate_add_page,
-	.have_wrcomb       = generic_have_wrcomb,
+	.use_intel_if		= 1,
+	.set_all		= generic_set_all,
+	.get			= generic_get_mtrr,
+	.get_free_region	= generic_get_free_region,
+	.set			= generic_set_mtrr,
+	.validate_add_page	= generic_validate_add_page,
+	.have_wrcomb		= generic_have_wrcomb,
 };
-- 
cgit v1.2.3


From 26dc67eda19beafb7e5ef2770cec5b3ee5995a8e Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinder@kernel.org>
Date: Sat, 4 Jul 2009 07:53:40 +0530
Subject: x86: Clean up mtrr/if.c

Fix:

  WARNING: Use #include <linux/uaccess.h> instead of <asm/uaccess.h>
  ERROR: trailing whitespace X 7
  ERROR: trailing statements should be on next line X 3
  WARNING: line over 80 characters X 5
  ERROR: space required before the open parenthesis '('

arch/x86/kernel/cpu/mtrr/if.o:

   text	   data	    bss	    dec	    hex	filename
   2239	      4	      0	   2243	    8c3	if.o.before
   2239	      4	      0	   2243	    8c3	if.o.after

md5:
   78d1f2aa4843ec6509c18e2dee54bc7f  if.o.before.asm
   78d1f2aa4843ec6509c18e2dee54bc7f  if.o.after.asm

Suggested-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <20090703164225.GA21447@elte.hu>
[ More cleanups to make the code more consistent. ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/mtrr/if.c | 135 ++++++++++++++++++++++++------------------
 1 file changed, 76 insertions(+), 59 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/mtrr/if.c b/arch/x86/kernel/cpu/mtrr/if.c
index fb73a52913a..08b6ea4c62b 100644
--- a/arch/x86/kernel/cpu/mtrr/if.c
+++ b/arch/x86/kernel/cpu/mtrr/if.c
@@ -1,27 +1,28 @@
-#include <linux/init.h>
-#include <linux/proc_fs.h>
 #include <linux/capability.h>
-#include <linux/ctype.h>
-#include <linux/module.h>
 #include <linux/seq_file.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
+#include <linux/proc_fs.h>
+#include <linux/module.h>
+#include <linux/ctype.h>
+#include <linux/init.h>
 
 #define LINE_SIZE 80
 
 #include <asm/mtrr.h>
+
 #include "mtrr.h"
 
 #define FILE_FCOUNT(f) (((struct seq_file *)((f)->private_data))->private)
 
 static const char *const mtrr_strings[MTRR_NUM_TYPES] =
 {
-    "uncachable",               /* 0 */
-    "write-combining",          /* 1 */
-    "?",                        /* 2 */
-    "?",                        /* 3 */
-    "write-through",            /* 4 */
-    "write-protect",            /* 5 */
-    "write-back",               /* 6 */
+	"uncachable",		/* 0 */
+	"write-combining",	/* 1 */
+	"?",			/* 2 */
+	"?",			/* 3 */
+	"write-through",	/* 4 */
+	"write-protect",	/* 5 */
+	"write-back",		/* 6 */
 };
 
 const char *mtrr_attrib_to_str(int x)
@@ -35,8 +36,8 @@ static int
 mtrr_file_add(unsigned long base, unsigned long size,
 	      unsigned int type, bool increment, struct file *file, int page)
 {
+	unsigned int *fcount = FILE_FCOUNT(file);
 	int reg, max;
-	unsigned int *fcount = FILE_FCOUNT(file); 
 
 	max = num_var_ranges;
 	if (fcount == NULL) {
@@ -61,8 +62,8 @@ static int
 mtrr_file_del(unsigned long base, unsigned long size,
 	      struct file *file, int page)
 {
-	int reg;
 	unsigned int *fcount = FILE_FCOUNT(file);
+	int reg;
 
 	if (!page) {
 		if ((base & (PAGE_SIZE - 1)) || (size & (PAGE_SIZE - 1)))
@@ -81,13 +82,14 @@ mtrr_file_del(unsigned long base, unsigned long size,
 	return reg;
 }
 
-/* RED-PEN: seq_file can seek now. this is ignored. */
+/*
+ * seq_file can seek but we ignore it.
+ *
+ * Format of control line:
+ *    "base=%Lx size=%Lx type=%s" or "disable=%d"
+ */
 static ssize_t
 mtrr_write(struct file *file, const char __user *buf, size_t len, loff_t * ppos)
-/*  Format of control line:
-    "base=%Lx size=%Lx type=%s"     OR:
-    "disable=%d"
-*/
 {
 	int i, err;
 	unsigned long reg;
@@ -100,15 +102,18 @@ mtrr_write(struct file *file, const char __user *buf, size_t len, loff_t * ppos)
 		return -EPERM;
 	if (!len)
 		return -EINVAL;
+
 	memset(line, 0, LINE_SIZE);
 	if (len > LINE_SIZE)
 		len = LINE_SIZE;
 	if (copy_from_user(line, buf, len - 1))
 		return -EFAULT;
+
 	linelen = strlen(line);
 	ptr = line + linelen - 1;
 	if (linelen && *ptr == '\n')
 		*ptr = '\0';
+
 	if (!strncmp(line, "disable=", 8)) {
 		reg = simple_strtoul(line + 8, &ptr, 0);
 		err = mtrr_del_page(reg, 0, 0);
@@ -116,28 +121,35 @@ mtrr_write(struct file *file, const char __user *buf, size_t len, loff_t * ppos)
 			return err;
 		return len;
 	}
+
 	if (strncmp(line, "base=", 5))
 		return -EINVAL;
+
 	base = simple_strtoull(line + 5, &ptr, 0);
-	for (; isspace(*ptr); ++ptr) ;
+	for (; isspace(*ptr); ++ptr)
+		;
+
 	if (strncmp(ptr, "size=", 5))
 		return -EINVAL;
+
 	size = simple_strtoull(ptr + 5, &ptr, 0);
 	if ((base & 0xfff) || (size & 0xfff))
 		return -EINVAL;
-	for (; isspace(*ptr); ++ptr) ;
+	for (; isspace(*ptr); ++ptr)
+		;
+
 	if (strncmp(ptr, "type=", 5))
 		return -EINVAL;
 	ptr += 5;
-	for (; isspace(*ptr); ++ptr) ;
+	for (; isspace(*ptr); ++ptr)
+		;
+
 	for (i = 0; i < MTRR_NUM_TYPES; ++i) {
 		if (strcmp(ptr, mtrr_strings[i]))
 			continue;
 		base >>= PAGE_SHIFT;
 		size >>= PAGE_SHIFT;
-		err =
-		    mtrr_add_page((unsigned long) base, (unsigned long) size, i,
-				  true);
+		err = mtrr_add_page((unsigned long)base, (unsigned long)size, i, true);
 		if (err < 0)
 			return err;
 		return len;
@@ -181,7 +193,9 @@ mtrr_ioctl(struct file *file, unsigned int cmd, unsigned long __arg)
 	case MTRRIOC32_SET_PAGE_ENTRY:
 	case MTRRIOC32_DEL_PAGE_ENTRY:
 	case MTRRIOC32_KILL_PAGE_ENTRY: {
-		struct mtrr_sentry32 __user *s32 = (struct mtrr_sentry32 __user *)__arg;
+		struct mtrr_sentry32 __user *s32;
+
+		s32 = (struct mtrr_sentry32 __user *)__arg;
 		err = get_user(sentry.base, &s32->base);
 		err |= get_user(sentry.size, &s32->size);
 		err |= get_user(sentry.type, &s32->type);
@@ -191,7 +205,9 @@ mtrr_ioctl(struct file *file, unsigned int cmd, unsigned long __arg)
 	}
 	case MTRRIOC32_GET_ENTRY:
 	case MTRRIOC32_GET_PAGE_ENTRY: {
-		struct mtrr_gentry32 __user *g32 = (struct mtrr_gentry32 __user *)__arg;
+		struct mtrr_gentry32 __user *g32;
+
+		g32 = (struct mtrr_gentry32 __user *)__arg;
 		err = get_user(gentry.regnum, &g32->regnum);
 		err |= get_user(gentry.base, &g32->base);
 		err |= get_user(gentry.size, &g32->size);
@@ -314,7 +330,7 @@ mtrr_ioctl(struct file *file, unsigned int cmd, unsigned long __arg)
 	if (err)
 		return err;
 
-	switch(cmd) {
+	switch (cmd) {
 	case MTRRIOC_GET_ENTRY:
 	case MTRRIOC_GET_PAGE_ENTRY:
 		if (copy_to_user(arg, &gentry, sizeof gentry))
@@ -323,7 +339,9 @@ mtrr_ioctl(struct file *file, unsigned int cmd, unsigned long __arg)
 #ifdef CONFIG_COMPAT
 	case MTRRIOC32_GET_ENTRY:
 	case MTRRIOC32_GET_PAGE_ENTRY: {
-		struct mtrr_gentry32 __user *g32 = (struct mtrr_gentry32 __user *)__arg;
+		struct mtrr_gentry32 __user *g32;
+
+		g32 = (struct mtrr_gentry32 __user *)__arg;
 		err = put_user(gentry.base, &g32->base);
 		err |= put_user(gentry.size, &g32->size);
 		err |= put_user(gentry.regnum, &g32->regnum);
@@ -335,11 +353,10 @@ mtrr_ioctl(struct file *file, unsigned int cmd, unsigned long __arg)
 	return err;
 }
 
-static int
-mtrr_close(struct inode *ino, struct file *file)
+static int mtrr_close(struct inode *ino, struct file *file)
 {
-	int i, max;
 	unsigned int *fcount = FILE_FCOUNT(file);
+	int i, max;
 
 	if (fcount != NULL) {
 		max = num_var_ranges;
@@ -359,22 +376,22 @@ static int mtrr_seq_show(struct seq_file *seq, void *offset);
 
 static int mtrr_open(struct inode *inode, struct file *file)
 {
-	if (!mtrr_if) 
+	if (!mtrr_if)
 		return -EIO;
-	if (!mtrr_if->get) 
-		return -ENXIO; 
+	if (!mtrr_if->get)
+		return -ENXIO;
 	return single_open(file, mtrr_seq_show, NULL);
 }
 
 static const struct file_operations mtrr_fops = {
-	.owner   = THIS_MODULE,
-	.open	 = mtrr_open, 
-	.read    = seq_read,
-	.llseek  = seq_lseek,
-	.write   = mtrr_write,
-	.unlocked_ioctl = mtrr_ioctl,
-	.compat_ioctl = mtrr_ioctl,
-	.release = mtrr_close,
+	.owner			= THIS_MODULE,
+	.open			= mtrr_open,
+	.read			= seq_read,
+	.llseek			= seq_lseek,
+	.write			= mtrr_write,
+	.unlocked_ioctl		= mtrr_ioctl,
+	.compat_ioctl		= mtrr_ioctl,
+	.release		= mtrr_close,
 };
 
 static int mtrr_seq_show(struct seq_file *seq, void *offset)
@@ -388,23 +405,24 @@ static int mtrr_seq_show(struct seq_file *seq, void *offset)
 	max = num_var_ranges;
 	for (i = 0; i < max; i++) {
 		mtrr_if->get(i, &base, &size, &type);
-		if (size == 0)
+		if (size == 0) {
 			mtrr_usage_table[i] = 0;
-		else {
-			if (size < (0x100000 >> PAGE_SHIFT)) {
-				/* less than 1MB */
-				factor = 'K';
-				size <<= PAGE_SHIFT - 10;
-			} else {
-				factor = 'M';
-				size >>= 20 - PAGE_SHIFT;
-			}
-			/* RED-PEN: base can be > 32bit */ 
-			len += seq_printf(seq, 
-				   "reg%02i: base=0x%06lx000 (%5luMB), size=%5lu%cB, count=%d: %s\n",
-			     i, base, base >> (20 - PAGE_SHIFT), size, factor,
-			     mtrr_usage_table[i], mtrr_attrib_to_str(type));
+			continue;
 		}
+		if (size < (0x100000 >> PAGE_SHIFT)) {
+			/* less than 1MB */
+			factor = 'K';
+			size <<= PAGE_SHIFT - 10;
+		} else {
+			factor = 'M';
+			size >>= 20 - PAGE_SHIFT;
+		}
+		/* Base can be > 32bit */
+		len += seq_printf(seq, "reg%02i: base=0x%06lx000 "
+			"(%5luMB), size=%5lu%cB, count=%d: %s\n",
+			i, base, base >> (20 - PAGE_SHIFT), size,
+			factor, mtrr_usage_table[i],
+			mtrr_attrib_to_str(type));
 	}
 	return 0;
 }
@@ -422,6 +440,5 @@ static int __init mtrr_if_init(void)
 	proc_create("mtrr", S_IWUSR | S_IRUGO, NULL, &mtrr_fops);
 	return 0;
 }
-
 arch_initcall(mtrr_if_init);
 #endif			/*  CONFIG_PROC_FS  */
-- 
cgit v1.2.3


From 3ec8dbcb09bb6df83993ca03e88cb85e3aaa8edb Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinder@kernel.org>
Date: Sat, 4 Jul 2009 07:54:16 +0530
Subject: x86: Clean up mtrr/mtrr.h

Fix:

  ERROR: do not use C99 // comments
  ERROR: "foo * bar" should be "foo *bar" X 2

Suggested-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <20090703164225.GA21447@elte.hu>
[ More tidyups ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/mtrr/mtrr.h | 19 +++++++++----------
 1 file changed, 9 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/mtrr/mtrr.h b/arch/x86/kernel/cpu/mtrr/mtrr.h
index 7538b767f20..a501dee9a87 100644
--- a/arch/x86/kernel/cpu/mtrr/mtrr.h
+++ b/arch/x86/kernel/cpu/mtrr/mtrr.h
@@ -1,5 +1,5 @@
 /*
- * local mtrr defines.
+ * local MTRR defines.
  */
 
 #include <linux/types.h>
@@ -14,13 +14,12 @@ extern unsigned int mtrr_usage_table[MTRR_MAX_VAR_RANGES];
 struct mtrr_ops {
 	u32	vendor;
 	u32	use_intel_if;
-//	void	(*init)(void);
 	void	(*set)(unsigned int reg, unsigned long base,
 		       unsigned long size, mtrr_type type);
 	void	(*set_all)(void);
 
 	void	(*get)(unsigned int reg, unsigned long *base,
-		       unsigned long *size, mtrr_type * type);
+		       unsigned long *size, mtrr_type *type);
 	int	(*get_free_region)(unsigned long base, unsigned long size,
 				   int replace_reg);
 	int	(*validate_add_page)(unsigned long base, unsigned long size,
@@ -39,11 +38,11 @@ extern int positive_have_wrcomb(void);
 
 /* library functions for processor-specific routines */
 struct set_mtrr_context {
-	unsigned long flags;
-	unsigned long cr4val;
-	u32 deftype_lo;
-	u32 deftype_hi;
-	u32 ccr3;
+	unsigned long	flags;
+	unsigned long	cr4val;
+	u32		deftype_lo;
+	u32		deftype_hi;
+	u32		ccr3;
 };
 
 void set_mtrr_done(struct set_mtrr_context *ctxt);
@@ -54,10 +53,10 @@ void fill_mtrr_var_range(unsigned int index,
 		u32 base_lo, u32 base_hi, u32 mask_lo, u32 mask_hi);
 void get_mtrr_state(void);
 
-extern void set_mtrr_ops(struct mtrr_ops * ops);
+extern void set_mtrr_ops(struct mtrr_ops *ops);
 
 extern u64 size_or_mask, size_and_mask;
-extern struct mtrr_ops * mtrr_if;
+extern struct mtrr_ops *mtrr_if;
 
 #define is_cpu(vnd)	(mtrr_if && mtrr_if->vendor == X86_VENDOR_##vnd)
 #define use_intel()	(mtrr_if && mtrr_if->use_intel_if == 1)
-- 
cgit v1.2.3


From 09b22c85d59dd935fdfa71655a443785e3f99c18 Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinder@kernel.org>
Date: Sat, 4 Jul 2009 07:54:53 +0530
Subject: x86: Clean up mtrr/state.c

Fix:

  WARNING: Use #include <linux/io.h> instead of <asm/io.h>
  WARNING: line over 80 characters X 4

arch/x86/kernel/cpu/mtrr/state.o:

   text	   data	    bss	    dec	    hex	filename
    864	      0	      0	    864	    360	state.o.before
    864	      0	      0	    864	    360	state.o.after

md5:
   c5c4364b9aeac74d70111e1e49667a2c  state.o.before.asm
   c5c4364b9aeac74d70111e1e49667a2c  state.o.after.asm

Suggested-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <20090703164225.GA21447@elte.hu>
[ More cleanups ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/mtrr/state.c | 68 +++++++++++++++++++++++-----------------
 1 file changed, 40 insertions(+), 28 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/mtrr/state.c b/arch/x86/kernel/cpu/mtrr/state.c
index 1f5fb1588d1..dfc80b4e6b0 100644
--- a/arch/x86/kernel/cpu/mtrr/state.c
+++ b/arch/x86/kernel/cpu/mtrr/state.c
@@ -1,24 +1,25 @@
-#include <linux/mm.h>
 #include <linux/init.h>
-#include <asm/io.h>
-#include <asm/mtrr.h>
-#include <asm/msr.h>
+#include <linux/io.h>
+#include <linux/mm.h>
+
 #include <asm/processor-cyrix.h>
 #include <asm/processor-flags.h>
-#include "mtrr.h"
+#include <asm/mtrr.h>
+#include <asm/msr.h>
 
+#include "mtrr.h"
 
-/*  Put the processor into a state where MTRRs can be safely set  */
+/* Put the processor into a state where MTRRs can be safely set */
 void set_mtrr_prepare_save(struct set_mtrr_context *ctxt)
 {
 	unsigned int cr0;
 
-	/*  Disable interrupts locally  */
+	/* Disable interrupts locally */
 	local_irq_save(ctxt->flags);
 
 	if (use_intel() || is_cpu(CYRIX)) {
 
-		/*  Save value of CR4 and clear Page Global Enable (bit 7)  */
+		/* Save value of CR4 and clear Page Global Enable (bit 7) */
 		if (cpu_has_pge) {
 			ctxt->cr4val = read_cr4();
 			write_cr4(ctxt->cr4val & ~X86_CR4_PGE);
@@ -33,50 +34,61 @@ void set_mtrr_prepare_save(struct set_mtrr_context *ctxt)
 		write_cr0(cr0);
 		wbinvd();
 
-		if (use_intel())
-			/*  Save MTRR state */
+		if (use_intel()) {
+			/* Save MTRR state */
 			rdmsr(MSR_MTRRdefType, ctxt->deftype_lo, ctxt->deftype_hi);
-		else
-			/* Cyrix ARRs - everything else were excluded at the top */
+		} else {
+			/*
+			 * Cyrix ARRs -
+			 * everything else were excluded at the top
+			 */
 			ctxt->ccr3 = getCx86(CX86_CCR3);
+		}
 	}
 }
 
 void set_mtrr_cache_disable(struct set_mtrr_context *ctxt)
 {
-	if (use_intel())
-		/*  Disable MTRRs, and set the default type to uncached  */
+	if (use_intel()) {
+		/* Disable MTRRs, and set the default type to uncached */
 		mtrr_wrmsr(MSR_MTRRdefType, ctxt->deftype_lo & 0xf300UL,
 		      ctxt->deftype_hi);
-	else if (is_cpu(CYRIX))
-		/* Cyrix ARRs - everything else were excluded at the top */
-		setCx86(CX86_CCR3, (ctxt->ccr3 & 0x0f) | 0x10);
+	} else {
+		if (is_cpu(CYRIX)) {
+			/* Cyrix ARRs - everything else were excluded at the top */
+			setCx86(CX86_CCR3, (ctxt->ccr3 & 0x0f) | 0x10);
+		}
+	}
 }
 
-/*  Restore the processor after a set_mtrr_prepare  */
+/* Restore the processor after a set_mtrr_prepare */
 void set_mtrr_done(struct set_mtrr_context *ctxt)
 {
 	if (use_intel() || is_cpu(CYRIX)) {
 
-		/*  Flush caches and TLBs  */
+		/* Flush caches and TLBs */
 		wbinvd();
 
-		/*  Restore MTRRdefType  */
-		if (use_intel())
+		/* Restore MTRRdefType */
+		if (use_intel()) {
 			/* Intel (P6) standard MTRRs */
-			mtrr_wrmsr(MSR_MTRRdefType, ctxt->deftype_lo, ctxt->deftype_hi);
-		else
-			/* Cyrix ARRs - everything else was excluded at the top */
+			mtrr_wrmsr(MSR_MTRRdefType, ctxt->deftype_lo,
+				   ctxt->deftype_hi);
+		} else {
+			/*
+			 * Cyrix ARRs -
+			 * everything else was excluded at the top
+			 */
 			setCx86(CX86_CCR3, ctxt->ccr3);
+		}
 
-		/*  Enable caches  */
+		/* Enable caches */
 		write_cr0(read_cr0() & 0xbfffffff);
 
-		/*  Restore value of CR4  */
+		/* Restore value of CR4 */
 		if (cpu_has_pge)
 			write_cr4(ctxt->cr4val);
 	}
-	/*  Re-enable interrupts locally (if enabled previously)  */
+	/* Re-enable interrupts locally (if enabled previously) */
 	local_irq_restore(ctxt->flags);
 }
-
-- 
cgit v1.2.3


From dbd51be026eaf84088fdee7fab9f38fa92eef26d Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinder@kernel.org>
Date: Sat, 4 Jul 2009 07:56:28 +0530
Subject: x86: Clean up mtrr/main.c

Fix following trivial style problems:

  ERROR: trailing whitespace X 25
  WARNING: Use #include <linux/uaccess.h> instead of <asm/uaccess.h>
  WARNING: Use #include <linux/kvm_para.h> instead of <asm/kvm_para.h>
  ERROR: do not initialise externals to 0 or NULL X 2
  ERROR: "foo * bar" should be "foo *bar" X 5
  ERROR: do not use assignment in if condition X 2
  WARNING: line over 80 characters X 8
  ERROR: return is not a function, parentheses are not required
  WARNING: braces {} are not necessary for any arm of this statement
  ERROR: space required before the open parenthesis '(' X 2
  ERROR: open brace '{' following function declarations go on the next line
  ERROR: space required after that ',' (ctx:VxV) X 8
  ERROR: space required before the open parenthesis '(' X 3
  ERROR: else should follow close brace '}'
  WARNING: space prohibited between function name and open parenthesis '('
  WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable X 2

Also use pr_debug and pr_warning where possible.

total: 50 errors, 14 warnings

arch/x86/kernel/cpu/mtrr/main.o:

   text	   data	    bss	    dec	    hex	filename
   3668	    116	   4156	   7940	   1f04	main.o.before
   3668	    116	   4156	   7940	   1f04	main.o.after

md5:
   e01af2fd28deef77c8d01e71acfbd365  main.o.before.asm
   e01af2fd28deef77c8d01e71acfbd365  main.o.after.asm

Suggested-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <20090703164225.GA21447@elte.hu>
Cc: Avi Kivity <avi@redhat.com> # Avi, please have a look at the kvm_para.h bit
[ More cleanups ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/mtrr/main.c | 455 +++++++++++++++++++++-------------------
 1 file changed, 242 insertions(+), 213 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/mtrr/main.c b/arch/x86/kernel/cpu/mtrr/main.c
index 8fc248b5aea..7af0f88a416 100644
--- a/arch/x86/kernel/cpu/mtrr/main.c
+++ b/arch/x86/kernel/cpu/mtrr/main.c
@@ -25,43 +25,48 @@
     Operating System Writer's Guide" (Intel document number 242692),
     section 11.11.7
 
-    This was cleaned and made readable by Patrick Mochel <mochel@osdl.org> 
-    on 6-7 March 2002. 
-    Source: Intel Architecture Software Developers Manual, Volume 3: 
+    This was cleaned and made readable by Patrick Mochel <mochel@osdl.org>
+    on 6-7 March 2002.
+    Source: Intel Architecture Software Developers Manual, Volume 3:
     System Programming Guide; Section 9.11. (1997 edition - PPro).
 */
 
+#define DEBUG
+
+#include <linux/types.h> /* FIXME: kvm_para.h needs this */
+
+#include <linux/kvm_para.h>
+#include <linux/uaccess.h>
 #include <linux/module.h>
+#include <linux/mutex.h>
 #include <linux/init.h>
+#include <linux/sort.h>
+#include <linux/cpu.h>
 #include <linux/pci.h>
 #include <linux/smp.h>
-#include <linux/cpu.h>
-#include <linux/mutex.h>
-#include <linux/sort.h>
 
+#include <asm/processor.h>
 #include <asm/e820.h>
 #include <asm/mtrr.h>
-#include <asm/uaccess.h>
-#include <asm/processor.h>
 #include <asm/msr.h>
-#include <asm/kvm_para.h>
+
 #include "mtrr.h"
 
-u32 num_var_ranges = 0;
+u32 num_var_ranges;
 
 unsigned int mtrr_usage_table[MTRR_MAX_VAR_RANGES];
 static DEFINE_MUTEX(mtrr_mutex);
 
 u64 size_or_mask, size_and_mask;
 
-static struct mtrr_ops * mtrr_ops[X86_VENDOR_NUM] = {};
+static struct mtrr_ops *mtrr_ops[X86_VENDOR_NUM];
 
-struct mtrr_ops * mtrr_if = NULL;
+struct mtrr_ops *mtrr_if;
 
 static void set_mtrr(unsigned int reg, unsigned long base,
 		     unsigned long size, mtrr_type type);
 
-void set_mtrr_ops(struct mtrr_ops * ops)
+void set_mtrr_ops(struct mtrr_ops *ops)
 {
 	if (ops->vendor && ops->vendor < X86_VENDOR_NUM)
 		mtrr_ops[ops->vendor] = ops;
@@ -72,30 +77,36 @@ static int have_wrcomb(void)
 {
 	struct pci_dev *dev;
 	u8 rev;
-	
-	if ((dev = pci_get_class(PCI_CLASS_BRIDGE_HOST << 8, NULL)) != NULL) {
-		/* ServerWorks LE chipsets < rev 6 have problems with write-combining
-		   Don't allow it and leave room for other chipsets to be tagged */
+
+	dev = pci_get_class(PCI_CLASS_BRIDGE_HOST << 8, NULL);
+	if (dev != NULL) {
+		/*
+		 * ServerWorks LE chipsets < rev 6 have problems with
+		 * write-combining. Don't allow it and leave room for other
+		 * chipsets to be tagged
+		 */
 		if (dev->vendor == PCI_VENDOR_ID_SERVERWORKS &&
 		    dev->device == PCI_DEVICE_ID_SERVERWORKS_LE) {
 			pci_read_config_byte(dev, PCI_CLASS_REVISION, &rev);
 			if (rev <= 5) {
-				printk(KERN_INFO "mtrr: Serverworks LE rev < 6 detected. Write-combining disabled.\n");
+				pr_info("mtrr: Serverworks LE rev < 6 detected. Write-combining disabled.\n");
 				pci_dev_put(dev);
 				return 0;
 			}
 		}
-		/* Intel 450NX errata # 23. Non ascending cacheline evictions to
-		   write combining memory may resulting in data corruption */
+		/*
+		 * Intel 450NX errata # 23. Non ascending cacheline evictions to
+		 * write combining memory may resulting in data corruption
+		 */
 		if (dev->vendor == PCI_VENDOR_ID_INTEL &&
 		    dev->device == PCI_DEVICE_ID_INTEL_82451NX) {
-			printk(KERN_INFO "mtrr: Intel 450NX MMC detected. Write-combining disabled.\n");
+			pr_info("mtrr: Intel 450NX MMC detected. Write-combining disabled.\n");
 			pci_dev_put(dev);
 			return 0;
 		}
 		pci_dev_put(dev);
-	}		
-	return (mtrr_if->have_wrcomb ? mtrr_if->have_wrcomb() : 0);
+	}
+	return mtrr_if->have_wrcomb ? mtrr_if->have_wrcomb() : 0;
 }
 
 /*  This function returns the number of variable MTRRs  */
@@ -103,12 +114,13 @@ static void __init set_num_var_ranges(void)
 {
 	unsigned long config = 0, dummy;
 
-	if (use_intel()) {
+	if (use_intel())
 		rdmsr(MSR_MTRRcap, config, dummy);
-	} else if (is_cpu(AMD))
+	else if (is_cpu(AMD))
 		config = 2;
 	else if (is_cpu(CYRIX) || is_cpu(CENTAUR))
 		config = 8;
+
 	num_var_ranges = config & 0xff;
 }
 
@@ -130,10 +142,12 @@ struct set_mtrr_data {
 	mtrr_type	smp_type;
 };
 
+/**
+ * ipi_handler - Synchronisation handler. Executed by "other" CPUs.
+ *
+ * Returns nothing.
+ */
 static void ipi_handler(void *info)
-/*  [SUMMARY] Synchronisation handler. Executed by "other" CPUs.
-    [RETURNS] Nothing.
-*/
 {
 #ifdef CONFIG_SMP
 	struct set_mtrr_data *data = info;
@@ -142,18 +156,19 @@ static void ipi_handler(void *info)
 	local_irq_save(flags);
 
 	atomic_dec(&data->count);
-	while(!atomic_read(&data->gate))
+	while (!atomic_read(&data->gate))
 		cpu_relax();
 
 	/*  The master has cleared me to execute  */
-	if (data->smp_reg != ~0U) 
-		mtrr_if->set(data->smp_reg, data->smp_base, 
+	if (data->smp_reg != ~0U) {
+		mtrr_if->set(data->smp_reg, data->smp_base,
 			     data->smp_size, data->smp_type);
-	else
+	} else {
 		mtrr_if->set_all();
+	}
 
 	atomic_dec(&data->count);
-	while(atomic_read(&data->gate))
+	while (atomic_read(&data->gate))
 		cpu_relax();
 
 	atomic_dec(&data->count);
@@ -161,7 +176,8 @@ static void ipi_handler(void *info)
 #endif
 }
 
-static inline int types_compatible(mtrr_type type1, mtrr_type type2) {
+static inline int types_compatible(mtrr_type type1, mtrr_type type2)
+{
 	return type1 == MTRR_TYPE_UNCACHABLE ||
 	       type2 == MTRR_TYPE_UNCACHABLE ||
 	       (type1 == MTRR_TYPE_WRTHROUGH && type2 == MTRR_TYPE_WRBACK) ||
@@ -176,10 +192,10 @@ static inline int types_compatible(mtrr_type type1, mtrr_type type2) {
  * @type:	mtrr type
  *
  * This is kinda tricky, but fortunately, Intel spelled it out for us cleanly:
- * 
+ *
  * 1. Send IPI to do the following:
  * 2. Disable Interrupts
- * 3. Wait for all procs to do so 
+ * 3. Wait for all procs to do so
  * 4. Enter no-fill cache mode
  * 5. Flush caches
  * 6. Clear PGE bit
@@ -189,26 +205,27 @@ static inline int types_compatible(mtrr_type type1, mtrr_type type2) {
  * 10. Enable all range registers
  * 11. Flush all TLBs and caches again
  * 12. Enter normal cache mode and reenable caching
- * 13. Set PGE 
+ * 13. Set PGE
  * 14. Wait for buddies to catch up
  * 15. Enable interrupts.
- * 
+ *
  * What does that mean for us? Well, first we set data.count to the number
  * of CPUs. As each CPU disables interrupts, it'll decrement it once. We wait
  * until it hits 0 and proceed. We set the data.gate flag and reset data.count.
- * Meanwhile, they are waiting for that flag to be set. Once it's set, each 
- * CPU goes through the transition of updating MTRRs. The CPU vendors may each do it 
- * differently, so we call mtrr_if->set() callback and let them take care of it.
- * When they're done, they again decrement data->count and wait for data.gate to 
- * be reset. 
- * When we finish, we wait for data.count to hit 0 and toggle the data.gate flag.
+ * Meanwhile, they are waiting for that flag to be set. Once it's set, each
+ * CPU goes through the transition of updating MTRRs.
+ * The CPU vendors may each do it differently,
+ * so we call mtrr_if->set() callback and let them take care of it.
+ * When they're done, they again decrement data->count and wait for data.gate
+ * to be reset.
+ * When we finish, we wait for data.count to hit 0 and toggle the data.gate flag
  * Everyone then enables interrupts and we all continue on.
  *
  * Note that the mechanism is the same for UP systems, too; all the SMP stuff
  * becomes nops.
  */
-static void set_mtrr(unsigned int reg, unsigned long base,
-		     unsigned long size, mtrr_type type)
+static void
+set_mtrr(unsigned int reg, unsigned long base, unsigned long size, mtrr_type type)
 {
 	struct set_mtrr_data data;
 	unsigned long flags;
@@ -218,121 +235,122 @@ static void set_mtrr(unsigned int reg, unsigned long base,
 	data.smp_size = size;
 	data.smp_type = type;
 	atomic_set(&data.count, num_booting_cpus() - 1);
-	/* make sure data.count is visible before unleashing other CPUs */
+
+	/* Make sure data.count is visible before unleashing other CPUs */
 	smp_wmb();
-	atomic_set(&data.gate,0);
+	atomic_set(&data.gate, 0);
 
-	/*  Start the ball rolling on other CPUs  */
+	/* Start the ball rolling on other CPUs */
 	if (smp_call_function(ipi_handler, &data, 0) != 0)
 		panic("mtrr: timed out waiting for other CPUs\n");
 
 	local_irq_save(flags);
 
-	while(atomic_read(&data.count))
+	while (atomic_read(&data.count))
 		cpu_relax();
 
-	/* ok, reset count and toggle gate */
+	/* Ok, reset count and toggle gate */
 	atomic_set(&data.count, num_booting_cpus() - 1);
 	smp_wmb();
-	atomic_set(&data.gate,1);
+	atomic_set(&data.gate, 1);
 
-	/* do our MTRR business */
+	/* Do our MTRR business */
 
-	/* HACK!
+	/*
+	 * HACK!
 	 * We use this same function to initialize the mtrrs on boot.
 	 * The state of the boot cpu's mtrrs has been saved, and we want
-	 * to replicate across all the APs. 
+	 * to replicate across all the APs.
 	 * If we're doing that @reg is set to something special...
 	 */
-	if (reg != ~0U) 
-		mtrr_if->set(reg,base,size,type);
+	if (reg != ~0U)
+		mtrr_if->set(reg, base, size, type);
 
-	/* wait for the others */
-	while(atomic_read(&data.count))
+	/* Wait for the others */
+	while (atomic_read(&data.count))
 		cpu_relax();
 
 	atomic_set(&data.count, num_booting_cpus() - 1);
 	smp_wmb();
-	atomic_set(&data.gate,0);
+	atomic_set(&data.gate, 0);
 
 	/*
 	 * Wait here for everyone to have seen the gate change
 	 * So we're the last ones to touch 'data'
 	 */
-	while(atomic_read(&data.count))
+	while (atomic_read(&data.count))
 		cpu_relax();
 
 	local_irq_restore(flags);
 }
 
 /**
- *	mtrr_add_page - Add a memory type region
- *	@base: Physical base address of region in pages (in units of 4 kB!)
- *	@size: Physical size of region in pages (4 kB)
- *	@type: Type of MTRR desired
- *	@increment: If this is true do usage counting on the region
+ * mtrr_add_page - Add a memory type region
+ * @base: Physical base address of region in pages (in units of 4 kB!)
+ * @size: Physical size of region in pages (4 kB)
+ * @type: Type of MTRR desired
+ * @increment: If this is true do usage counting on the region
  *
- *	Memory type region registers control the caching on newer Intel and
- *	non Intel processors. This function allows drivers to request an
- *	MTRR is added. The details and hardware specifics of each processor's
- *	implementation are hidden from the caller, but nevertheless the 
- *	caller should expect to need to provide a power of two size on an
- *	equivalent power of two boundary.
+ * Memory type region registers control the caching on newer Intel and
+ * non Intel processors. This function allows drivers to request an
+ * MTRR is added. The details and hardware specifics of each processor's
+ * implementation are hidden from the caller, but nevertheless the
+ * caller should expect to need to provide a power of two size on an
+ * equivalent power of two boundary.
  *
- *	If the region cannot be added either because all regions are in use
- *	or the CPU cannot support it a negative value is returned. On success
- *	the register number for this entry is returned, but should be treated
- *	as a cookie only.
+ * If the region cannot be added either because all regions are in use
+ * or the CPU cannot support it a negative value is returned. On success
+ * the register number for this entry is returned, but should be treated
+ * as a cookie only.
  *
- *	On a multiprocessor machine the changes are made to all processors.
- *	This is required on x86 by the Intel processors.
+ * On a multiprocessor machine the changes are made to all processors.
+ * This is required on x86 by the Intel processors.
  *
- *	The available types are
+ * The available types are
  *
- *	%MTRR_TYPE_UNCACHABLE	-	No caching
+ * %MTRR_TYPE_UNCACHABLE - No caching
  *
- *	%MTRR_TYPE_WRBACK	-	Write data back in bursts whenever
+ * %MTRR_TYPE_WRBACK - Write data back in bursts whenever
  *
- *	%MTRR_TYPE_WRCOMB	-	Write data back soon but allow bursts
+ * %MTRR_TYPE_WRCOMB - Write data back soon but allow bursts
  *
- *	%MTRR_TYPE_WRTHROUGH	-	Cache reads but not writes
+ * %MTRR_TYPE_WRTHROUGH - Cache reads but not writes
  *
- *	BUGS: Needs a quiet flag for the cases where drivers do not mind
- *	failures and do not wish system log messages to be sent.
+ * BUGS: Needs a quiet flag for the cases where drivers do not mind
+ * failures and do not wish system log messages to be sent.
  */
-
-int mtrr_add_page(unsigned long base, unsigned long size, 
+int mtrr_add_page(unsigned long base, unsigned long size,
 		  unsigned int type, bool increment)
 {
+	unsigned long lbase, lsize;
 	int i, replace, error;
 	mtrr_type ltype;
-	unsigned long lbase, lsize;
 
 	if (!mtrr_if)
 		return -ENXIO;
-		
-	if ((error = mtrr_if->validate_add_page(base,size,type)))
+
+	error = mtrr_if->validate_add_page(base, size, type);
+	if (error)
 		return error;
 
 	if (type >= MTRR_NUM_TYPES) {
-		printk(KERN_WARNING "mtrr: type: %u invalid\n", type);
+		pr_warning("mtrr: type: %u invalid\n", type);
 		return -EINVAL;
 	}
 
-	/*  If the type is WC, check that this processor supports it  */
+	/* If the type is WC, check that this processor supports it */
 	if ((type == MTRR_TYPE_WRCOMB) && !have_wrcomb()) {
-		printk(KERN_WARNING
-		       "mtrr: your processor doesn't support write-combining\n");
+		pr_warning("mtrr: your processor doesn't support write-combining\n");
 		return -ENOSYS;
 	}
 
 	if (!size) {
-		printk(KERN_WARNING "mtrr: zero sized request\n");
+		pr_warning("mtrr: zero sized request\n");
 		return -EINVAL;
 	}
 
 	if (base & size_or_mask || size & size_or_mask) {
-		printk(KERN_WARNING "mtrr: base or size exceeds the MTRR width\n");
+		pr_warning("mtrr: base or size exceeds the MTRR width\n");
 		return -EINVAL;
 	}
 
@@ -341,36 +359,40 @@ int mtrr_add_page(unsigned long base, unsigned long size,
 
 	/* No CPU hotplug when we change MTRR entries */
 	get_online_cpus();
-	/*  Search for existing MTRR  */
+
+	/* Search for existing MTRR  */
 	mutex_lock(&mtrr_mutex);
 	for (i = 0; i < num_var_ranges; ++i) {
 		mtrr_if->get(i, &lbase, &lsize, &ltype);
-		if (!lsize || base > lbase + lsize - 1 || base + size - 1 < lbase)
+		if (!lsize || base > lbase + lsize - 1 ||
+		    base + size - 1 < lbase)
 			continue;
-		/*  At this point we know there is some kind of overlap/enclosure  */
+		/*
+		 * At this point we know there is some kind of
+		 * overlap/enclosure
+		 */
 		if (base < lbase || base + size - 1 > lbase + lsize - 1) {
-			if (base <= lbase && base + size - 1 >= lbase + lsize - 1) {
+			if (base <= lbase &&
+			    base + size - 1 >= lbase + lsize - 1) {
 				/*  New region encloses an existing region  */
 				if (type == ltype) {
 					replace = replace == -1 ? i : -2;
 					continue;
-				}
-				else if (types_compatible(type, ltype))
+				} else if (types_compatible(type, ltype))
 					continue;
 			}
-			printk(KERN_WARNING
-			       "mtrr: 0x%lx000,0x%lx000 overlaps existing"
-			       " 0x%lx000,0x%lx000\n", base, size, lbase,
-			       lsize);
+			pr_warning("mtrr: 0x%lx000,0x%lx000 overlaps existing"
+				" 0x%lx000,0x%lx000\n", base, size, lbase,
+				lsize);
 			goto out;
 		}
-		/*  New region is enclosed by an existing region  */
+		/* New region is enclosed by an existing region */
 		if (ltype != type) {
 			if (types_compatible(type, ltype))
 				continue;
-			printk (KERN_WARNING "mtrr: type mismatch for %lx000,%lx000 old: %s new: %s\n",
-			     base, size, mtrr_attrib_to_str(ltype),
-			     mtrr_attrib_to_str(type));
+			pr_warning("mtrr: type mismatch for %lx000,%lx000 old: %s new: %s\n",
+				base, size, mtrr_attrib_to_str(ltype),
+				mtrr_attrib_to_str(type));
 			goto out;
 		}
 		if (increment)
@@ -378,7 +400,7 @@ int mtrr_add_page(unsigned long base, unsigned long size,
 		error = i;
 		goto out;
 	}
-	/*  Search for an empty MTRR  */
+	/* Search for an empty MTRR */
 	i = mtrr_if->get_free_region(base, size, replace);
 	if (i >= 0) {
 		set_mtrr(i, base, size, type);
@@ -393,8 +415,9 @@ int mtrr_add_page(unsigned long base, unsigned long size,
 				mtrr_usage_table[replace] = 0;
 			}
 		}
-	} else
-		printk(KERN_INFO "mtrr: no more MTRRs available\n");
+	} else {
+		pr_info("mtrr: no more MTRRs available\n");
+	}
 	error = i;
  out:
 	mutex_unlock(&mtrr_mutex);
@@ -405,10 +428,8 @@ int mtrr_add_page(unsigned long base, unsigned long size,
 static int mtrr_check(unsigned long base, unsigned long size)
 {
 	if ((base & (PAGE_SIZE - 1)) || (size & (PAGE_SIZE - 1))) {
-		printk(KERN_WARNING
-			"mtrr: size and base must be multiples of 4 kiB\n");
-		printk(KERN_DEBUG
-			"mtrr: size: 0x%lx  base: 0x%lx\n", size, base);
+		pr_warning("mtrr: size and base must be multiples of 4 kiB\n");
+		pr_debug("mtrr: size: 0x%lx  base: 0x%lx\n", size, base);
 		dump_stack();
 		return -1;
 	}
@@ -416,66 +437,64 @@ static int mtrr_check(unsigned long base, unsigned long size)
 }
 
 /**
- *	mtrr_add - Add a memory type region
- *	@base: Physical base address of region
- *	@size: Physical size of region
- *	@type: Type of MTRR desired
- *	@increment: If this is true do usage counting on the region
+ * mtrr_add - Add a memory type region
+ * @base: Physical base address of region
+ * @size: Physical size of region
+ * @type: Type of MTRR desired
+ * @increment: If this is true do usage counting on the region
  *
- *	Memory type region registers control the caching on newer Intel and
- *	non Intel processors. This function allows drivers to request an
- *	MTRR is added. The details and hardware specifics of each processor's
- *	implementation are hidden from the caller, but nevertheless the 
- *	caller should expect to need to provide a power of two size on an
- *	equivalent power of two boundary.
+ * Memory type region registers control the caching on newer Intel and
+ * non Intel processors. This function allows drivers to request an
+ * MTRR is added. The details and hardware specifics of each processor's
+ * implementation are hidden from the caller, but nevertheless the
+ * caller should expect to need to provide a power of two size on an
+ * equivalent power of two boundary.
  *
- *	If the region cannot be added either because all regions are in use
- *	or the CPU cannot support it a negative value is returned. On success
- *	the register number for this entry is returned, but should be treated
- *	as a cookie only.
+ * If the region cannot be added either because all regions are in use
+ * or the CPU cannot support it a negative value is returned. On success
+ * the register number for this entry is returned, but should be treated
+ * as a cookie only.
  *
- *	On a multiprocessor machine the changes are made to all processors.
- *	This is required on x86 by the Intel processors.
+ * On a multiprocessor machine the changes are made to all processors.
+ * This is required on x86 by the Intel processors.
  *
- *	The available types are
+ * The available types are
  *
- *	%MTRR_TYPE_UNCACHABLE	-	No caching
+ * %MTRR_TYPE_UNCACHABLE - No caching
  *
- *	%MTRR_TYPE_WRBACK	-	Write data back in bursts whenever
+ * %MTRR_TYPE_WRBACK - Write data back in bursts whenever
  *
- *	%MTRR_TYPE_WRCOMB	-	Write data back soon but allow bursts
+ * %MTRR_TYPE_WRCOMB - Write data back soon but allow bursts
  *
- *	%MTRR_TYPE_WRTHROUGH	-	Cache reads but not writes
+ * %MTRR_TYPE_WRTHROUGH - Cache reads but not writes
  *
- *	BUGS: Needs a quiet flag for the cases where drivers do not mind
- *	failures and do not wish system log messages to be sent.
+ * BUGS: Needs a quiet flag for the cases where drivers do not mind
+ * failures and do not wish system log messages to be sent.
  */
-
-int
-mtrr_add(unsigned long base, unsigned long size, unsigned int type,
-	 bool increment)
+int mtrr_add(unsigned long base, unsigned long size, unsigned int type,
+	     bool increment)
 {
 	if (mtrr_check(base, size))
 		return -EINVAL;
 	return mtrr_add_page(base >> PAGE_SHIFT, size >> PAGE_SHIFT, type,
 			     increment);
 }
+EXPORT_SYMBOL(mtrr_add);
 
 /**
- *	mtrr_del_page - delete a memory type region
- *	@reg: Register returned by mtrr_add
- *	@base: Physical base address
- *	@size: Size of region
+ * mtrr_del_page - delete a memory type region
+ * @reg: Register returned by mtrr_add
+ * @base: Physical base address
+ * @size: Size of region
  *
- *	If register is supplied then base and size are ignored. This is
- *	how drivers should call it.
+ * If register is supplied then base and size are ignored. This is
+ * how drivers should call it.
  *
- *	Releases an MTRR region. If the usage count drops to zero the 
- *	register is freed and the region returns to default state.
- *	On success the register is returned, on failure a negative error
- *	code.
+ * Releases an MTRR region. If the usage count drops to zero the
+ * register is freed and the region returns to default state.
+ * On success the register is returned, on failure a negative error
+ * code.
  */
-
 int mtrr_del_page(int reg, unsigned long base, unsigned long size)
 {
 	int i, max;
@@ -500,22 +519,22 @@ int mtrr_del_page(int reg, unsigned long base, unsigned long size)
 			}
 		}
 		if (reg < 0) {
-			printk(KERN_DEBUG "mtrr: no MTRR for %lx000,%lx000 found\n", base,
-			       size);
+			pr_debug("mtrr: no MTRR for %lx000,%lx000 found\n",
+				 base, size);
 			goto out;
 		}
 	}
 	if (reg >= max) {
-		printk(KERN_WARNING "mtrr: register: %d too big\n", reg);
+		pr_warning("mtrr: register: %d too big\n", reg);
 		goto out;
 	}
 	mtrr_if->get(reg, &lbase, &lsize, &ltype);
 	if (lsize < 1) {
-		printk(KERN_WARNING "mtrr: MTRR %d not used\n", reg);
+		pr_warning("mtrr: MTRR %d not used\n", reg);
 		goto out;
 	}
 	if (mtrr_usage_table[reg] < 1) {
-		printk(KERN_WARNING "mtrr: reg: %d has count=0\n", reg);
+		pr_warning("mtrr: reg: %d has count=0\n", reg);
 		goto out;
 	}
 	if (--mtrr_usage_table[reg] < 1)
@@ -526,33 +545,31 @@ int mtrr_del_page(int reg, unsigned long base, unsigned long size)
 	put_online_cpus();
 	return error;
 }
+
 /**
- *	mtrr_del - delete a memory type region
- *	@reg: Register returned by mtrr_add
- *	@base: Physical base address
- *	@size: Size of region
+ * mtrr_del - delete a memory type region
+ * @reg: Register returned by mtrr_add
+ * @base: Physical base address
+ * @size: Size of region
  *
- *	If register is supplied then base and size are ignored. This is
- *	how drivers should call it.
+ * If register is supplied then base and size are ignored. This is
+ * how drivers should call it.
  *
- *	Releases an MTRR region. If the usage count drops to zero the 
- *	register is freed and the region returns to default state.
- *	On success the register is returned, on failure a negative error
- *	code.
+ * Releases an MTRR region. If the usage count drops to zero the
+ * register is freed and the region returns to default state.
+ * On success the register is returned, on failure a negative error
+ * code.
  */
-
-int
-mtrr_del(int reg, unsigned long base, unsigned long size)
+int mtrr_del(int reg, unsigned long base, unsigned long size)
 {
 	if (mtrr_check(base, size))
 		return -EINVAL;
 	return mtrr_del_page(reg, base >> PAGE_SHIFT, size >> PAGE_SHIFT);
 }
-
-EXPORT_SYMBOL(mtrr_add);
 EXPORT_SYMBOL(mtrr_del);
 
-/* HACK ALERT!
+/*
+ * HACK ALERT!
  * These should be called implicitly, but we can't yet until all the initcall
  * stuff is done...
  */
@@ -576,29 +593,28 @@ struct mtrr_value {
 
 static struct mtrr_value mtrr_value[MTRR_MAX_VAR_RANGES];
 
-static int mtrr_save(struct sys_device * sysdev, pm_message_t state)
+static int mtrr_save(struct sys_device *sysdev, pm_message_t state)
 {
 	int i;
 
 	for (i = 0; i < num_var_ranges; i++) {
-		mtrr_if->get(i,
-			     &mtrr_value[i].lbase,
-			     &mtrr_value[i].lsize,
-			     &mtrr_value[i].ltype);
+		mtrr_if->get(i, &mtrr_value[i].lbase,
+				&mtrr_value[i].lsize,
+				&mtrr_value[i].ltype);
 	}
 	return 0;
 }
 
-static int mtrr_restore(struct sys_device * sysdev)
+static int mtrr_restore(struct sys_device *sysdev)
 {
 	int i;
 
 	for (i = 0; i < num_var_ranges; i++) {
-		if (mtrr_value[i].lsize)
-			set_mtrr(i,
-				 mtrr_value[i].lbase,
-				 mtrr_value[i].lsize,
-				 mtrr_value[i].ltype);
+		if (mtrr_value[i].lsize) {
+			set_mtrr(i, mtrr_value[i].lbase,
+				    mtrr_value[i].lsize,
+				    mtrr_value[i].ltype);
+		}
 	}
 	return 0;
 }
@@ -615,26 +631,29 @@ int __initdata changed_by_mtrr_cleanup;
 /**
  * mtrr_bp_init - initialize mtrrs on the boot CPU
  *
- * This needs to be called early; before any of the other CPUs are 
+ * This needs to be called early; before any of the other CPUs are
  * initialized (i.e. before smp_init()).
- * 
+ *
  */
 void __init mtrr_bp_init(void)
 {
 	u32 phys_addr;
+
 	init_ifs();
 
 	phys_addr = 32;
 
 	if (cpu_has_mtrr) {
 		mtrr_if = &generic_mtrr_ops;
-		size_or_mask = 0xff000000;	/* 36 bits */
+		size_or_mask = 0xff000000;			/* 36 bits */
 		size_and_mask = 0x00f00000;
 		phys_addr = 36;
 
-		/* This is an AMD specific MSR, but we assume(hope?) that
-		   Intel will implement it to when they extend the address
-		   bus of the Xeon. */
+		/*
+		 * This is an AMD specific MSR, but we assume(hope?) that
+		 * Intel will implement it to when they extend the address
+		 * bus of the Xeon.
+		 */
 		if (cpuid_eax(0x80000000) >= 0x80000008) {
 			phys_addr = cpuid_eax(0x80000008) & 0xff;
 			/* CPUID workaround for Intel 0F33/0F34 CPU */
@@ -649,9 +668,11 @@ void __init mtrr_bp_init(void)
 			size_and_mask = ~size_or_mask & 0xfffff00000ULL;
 		} else if (boot_cpu_data.x86_vendor == X86_VENDOR_CENTAUR &&
 			   boot_cpu_data.x86 == 6) {
-			/* VIA C* family have Intel style MTRRs, but
-			   don't support PAE */
-			size_or_mask = 0xfff00000;	/* 32 bits */
+			/*
+			 * VIA C* family have Intel style MTRRs,
+			 * but don't support PAE
+			 */
+			size_or_mask = 0xfff00000;		/* 32 bits */
 			size_and_mask = 0;
 			phys_addr = 32;
 		}
@@ -694,7 +715,6 @@ void __init mtrr_bp_init(void)
 				changed_by_mtrr_cleanup = 1;
 				mtrr_if->set_all();
 			}
-
 		}
 	}
 }
@@ -706,12 +726,17 @@ void mtrr_ap_init(void)
 	if (!mtrr_if || !use_intel())
 		return;
 	/*
-	 * Ideally we should hold mtrr_mutex here to avoid mtrr entries changed,
-	 * but this routine will be called in cpu boot time, holding the lock
-	 * breaks it. This routine is called in two cases: 1.very earily time
-	 * of software resume, when there absolutely isn't mtrr entry changes;
-	 * 2.cpu hotadd time. We let mtrr_add/del_page hold cpuhotplug lock to
-	 * prevent mtrr entry changes
+	 * Ideally we should hold mtrr_mutex here to avoid mtrr entries
+	 * changed, but this routine will be called in cpu boot time,
+	 * holding the lock breaks it.
+	 *
+	 * This routine is called in two cases:
+	 *
+	 *   1. very earily time of software resume, when there absolutely
+	 *      isn't mtrr entry changes;
+	 *
+	 *   2. cpu hotadd time. We let mtrr_add/del_page hold cpuhotplug
+	 *      lock to prevent mtrr entry changes
 	 */
 	local_irq_save(flags);
 
@@ -732,19 +757,23 @@ static int __init mtrr_init_finialize(void)
 {
 	if (!mtrr_if)
 		return 0;
+
 	if (use_intel()) {
 		if (!changed_by_mtrr_cleanup)
 			mtrr_state_warn();
-	} else {
-		/* The CPUs haven't MTRR and seem to not support SMP. They have
-		 * specific drivers, we use a tricky method to support
-		 * suspend/resume for them.
-		 * TBD: is there any system with such CPU which supports
-		 * suspend/resume?  if no, we should remove the code.
-		 */
-		sysdev_driver_register(&cpu_sysdev_class,
-			&mtrr_sysdev_driver);
+		return 0;
 	}
+
+	/*
+	 * The CPU has no MTRR and seems to not support SMP. They have
+	 * specific drivers, we use a tricky method to support
+	 * suspend/resume for them.
+	 *
+	 * TBD: is there any system with such CPU which supports
+	 * suspend/resume? If no, we should remove the code.
+	 */
+	sysdev_driver_register(&cpu_sysdev_class, &mtrr_sysdev_driver);
+
 	return 0;
 }
 subsys_initcall(mtrr_init_finialize);
-- 
cgit v1.2.3


From e3d0e69268dffb9676bf0800a60fb3573a723480 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Sun, 5 Jul 2009 09:44:11 +0200
Subject: x86: Further clean up of mtrr/generic.c

Yinghai noticed that i defined BIOS_BUG_MSG but added no
usage for it. The usage is to clean up this turd in generic.c:

			printk(KERN_WARNING "WARNING: BIOS bug: VAR MTRR %d "
				"contains strange UC entry under 1M, check "
				"with your system vendor!\n", i);

Breaking printk lines in the middle looks ugly, is hard to read
and breaks 'git grep'. Use the BIOS_BUG_MSG instead.

Also complete the moving of structure definitions and variables
to the top of the file.

Reported-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <20090703164225.GA21447@elte.hu>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/mtrr/cleanup.c | 56 ++++++++++++++++++--------------------
 1 file changed, 27 insertions(+), 29 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/mtrr/cleanup.c b/arch/x86/kernel/cpu/mtrr/cleanup.c
index b8aba811b60..315738c74aa 100644
--- a/arch/x86/kernel/cpu/mtrr/cleanup.c
+++ b/arch/x86/kernel/cpu/mtrr/cleanup.c
@@ -34,14 +34,37 @@
 
 #include "mtrr.h"
 
-/* Should be related to MTRR_VAR_RANGES nums */
-#define RANGE_NUM 256
-
 struct res_range {
 	unsigned long	start;
 	unsigned long	end;
 };
 
+struct var_mtrr_range_state {
+	unsigned long	base_pfn;
+	unsigned long	size_pfn;
+	mtrr_type	type;
+};
+
+struct var_mtrr_state {
+	unsigned long	range_startk;
+	unsigned long	range_sizek;
+	unsigned long	chunk_sizek;
+	unsigned long	gran_sizek;
+	unsigned int	reg;
+};
+
+/* Should be related to MTRR_VAR_RANGES nums */
+#define RANGE_NUM				256
+
+static struct res_range __initdata		range[RANGE_NUM];
+static int __initdata				nr_range;
+
+static struct var_mtrr_range_state __initdata	range_state[RANGE_NUM];
+
+static int __initdata debug_print;
+#define Dprintk(x...) do { if (debug_print) printk(KERN_DEBUG x); } while (0)
+
+
 static int __init
 add_range(struct res_range *range, int nr_range,
 	  unsigned long start, unsigned long end)
@@ -147,18 +170,6 @@ static int __init cmp_range(const void *x1, const void *x2)
 	return start1 - start2;
 }
 
-struct var_mtrr_range_state {
-	unsigned long	base_pfn;
-	unsigned long	size_pfn;
-	mtrr_type	type;
-};
-
-static struct var_mtrr_range_state __initdata range_state[RANGE_NUM];
-
-static int __initdata debug_print;
-#define Dprintk(x...) do { if (debug_print) printk(KERN_DEBUG x); } while (0)
-
-
 #define BIOS_BUG_MSG KERN_WARNING \
 	"WARNING: BIOS bug: VAR MTRR %d contains strange UC entry under 1M, check with your system vendor!\n"
 
@@ -200,9 +211,7 @@ x86_get_mtrr_mem_range(struct res_range *range, int nr_range,
 		if (base < (1<<(20-PAGE_SHIFT)) && mtrr_state.have_fixed &&
 		    (mtrr_state.enabled & 1)) {
 			/* Var MTRR contains UC entry below 1M? Skip it: */
-			printk(KERN_WARNING "WARNING: BIOS bug: VAR MTRR %d "
-				"contains strange UC entry under 1M, check "
-				"with your system vendor!\n", i);
+			printk(BIOS_BUG_MSG, i);
 			if (base + size <= (1<<(20-PAGE_SHIFT)))
 				continue;
 			size -= (1<<(20-PAGE_SHIFT)) - base;
@@ -244,9 +253,6 @@ x86_get_mtrr_mem_range(struct res_range *range, int nr_range,
 	return nr_range;
 }
 
-static struct res_range __initdata range[RANGE_NUM];
-static int __initdata nr_range;
-
 #ifdef CONFIG_MTRR_SANITIZER
 
 static unsigned long __init sum_ranges(struct res_range *range, int nr_range)
@@ -284,14 +290,6 @@ static int __init mtrr_cleanup_debug_setup(char *str)
 }
 early_param("mtrr_cleanup_debug", mtrr_cleanup_debug_setup);
 
-struct var_mtrr_state {
-	unsigned long	range_startk;
-	unsigned long	range_sizek;
-	unsigned long	chunk_sizek;
-	unsigned long	gran_sizek;
-	unsigned int	reg;
-};
-
 static void __init
 set_var_mtrr(unsigned int reg, unsigned long basek, unsigned long sizek,
 	     unsigned char type, unsigned int address_bits)
-- 
cgit v1.2.3


From 6ed106549d17474ca17a16057f4c0ed4eba5a7ca Mon Sep 17 00:00:00 2001
From: Patrick McHardy <kaber@trash.net>
Date: Tue, 23 Jun 2009 06:03:08 +0000
Subject: net: use NETDEV_TX_OK instead of 0 in ndo_start_xmit() functions

This patch is the result of an automatic spatch transformation to convert
all ndo_start_xmit() return values of 0 to NETDEV_TX_OK.

Some occurences are missed by the automatic conversion, those will be
handled in a seperate patch.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/ia64/hp/sim/simeth.c  | 2 +-
 arch/um/drivers/net_kern.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/ia64/hp/sim/simeth.c b/arch/ia64/hp/sim/simeth.c
index e4d8fde6810..7e81966ce48 100644
--- a/arch/ia64/hp/sim/simeth.c
+++ b/arch/ia64/hp/sim/simeth.c
@@ -412,7 +412,7 @@ simeth_tx(struct sk_buff *skb, struct net_device *dev)
 	 */
 
 	dev_kfree_skb(skb);
-	return 0;
+	return NETDEV_TX_OK;
 }
 
 static inline struct sk_buff *
diff --git a/arch/um/drivers/net_kern.c b/arch/um/drivers/net_kern.c
index 3b44b47c7e1..4c75409bc09 100644
--- a/arch/um/drivers/net_kern.c
+++ b/arch/um/drivers/net_kern.c
@@ -245,7 +245,7 @@ static int uml_net_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	dev_kfree_skb(skb);
 
-	return 0;
+	return NETDEV_TX_OK;
 }
 
 static void uml_net_set_multicast_list(struct net_device *dev)
-- 
cgit v1.2.3


From ec634fe328182a1a098585bfc7b69e5042bdb08d Mon Sep 17 00:00:00 2001
From: Patrick McHardy <kaber@trash.net>
Date: Sun, 5 Jul 2009 19:23:38 -0700
Subject: net: convert remaining non-symbolic return values in ndo_start_xmit()
 functions

This patch converts the remaining occurences of raw return values to their
symbolic counterparts in ndo_start_xmit() functions that were missed by the
previous automatic conversion.

Additionally code that assumed the symbolic value of NETDEV_TX_OK to be zero
is changed to explicitly use NETDEV_TX_OK.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/xtensa/platforms/iss/network.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/xtensa/platforms/iss/network.c b/arch/xtensa/platforms/iss/network.c
index edad4156d89..2f0b86b37cf 100644
--- a/arch/xtensa/platforms/iss/network.c
+++ b/arch/xtensa/platforms/iss/network.c
@@ -545,7 +545,7 @@ static int iss_net_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	spin_unlock_irqrestore(&lp->lock, flags);
 
 	dev_kfree_skb(skb);
-	return 0;
+	return NETDEV_TX_OK;
 }
 
 
-- 
cgit v1.2.3


From bbeddc43e673fb6882cc55efdc3c3002c14f5d08 Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Sun, 5 Jul 2009 22:43:01 +0100
Subject: [ARM] versatile: add PL061 gpiolib support

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/Kconfig                            |  1 +
 arch/arm/mach-versatile/core.c              | 15 +++++++++++++--
 arch/arm/mach-versatile/include/mach/gpio.h |  6 ++++++
 arch/arm/mach-versatile/include/mach/irqs.h | 11 ++++++++++-
 arch/arm/mach-versatile/versatile_pb.c      | 15 +++++++++++++--
 5 files changed, 43 insertions(+), 5 deletions(-)
 create mode 100644 arch/arm/mach-versatile/include/mach/gpio.h

(limited to 'arch')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index aef63c8e3d2..e4971e4fa56 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -229,6 +229,7 @@ config ARCH_VERSATILE
 	select ICST307
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
+	select ARCH_WANT_OPTIONAL_GPIOLIB
 	help
 	  This enables support for ARM Ltd Versatile board.
 
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index 69214fc8bd1..92273c95edf 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -26,6 +26,7 @@
 #include <linux/interrupt.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/clcd.h>
+#include <linux/amba/pl061.h>
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
 #include <linux/cnt32_to_63.h>
@@ -706,6 +707,16 @@ static struct clcd_board clcd_plat_data = {
 	.remove		= versatile_clcd_remove,
 };
 
+static struct pl061_platform_data gpio0_plat_data = {
+	.gpio_base	= 0,
+	.irq_base	= IRQ_GPIO0_START,
+};
+
+static struct pl061_platform_data gpio1_plat_data = {
+	.gpio_base	= 8,
+	.irq_base	= IRQ_GPIO1_START,
+};
+
 #define AACI_IRQ	{ IRQ_AACI, NO_IRQ }
 #define AACI_DMA	{ 0x80, 0x81 }
 #define MMCI0_IRQ	{ IRQ_MMCI0A,IRQ_SIC_MMCI0B }
@@ -768,8 +779,8 @@ AMBA_DEVICE(clcd,  "dev:20",  CLCD,     &clcd_plat_data);
 AMBA_DEVICE(dmac,  "dev:30",  DMAC,     NULL);
 AMBA_DEVICE(sctl,  "dev:e0",  SCTL,     NULL);
 AMBA_DEVICE(wdog,  "dev:e1",  WATCHDOG, NULL);
-AMBA_DEVICE(gpio0, "dev:e4",  GPIO0,    NULL);
-AMBA_DEVICE(gpio1, "dev:e5",  GPIO1,    NULL);
+AMBA_DEVICE(gpio0, "dev:e4",  GPIO0,    &gpio0_plat_data);
+AMBA_DEVICE(gpio1, "dev:e5",  GPIO1,    &gpio1_plat_data);
 AMBA_DEVICE(rtc,   "dev:e8",  RTC,      NULL);
 AMBA_DEVICE(sci0,  "dev:f0",  SCI,      NULL);
 AMBA_DEVICE(uart0, "dev:f1",  UART0,    NULL);
diff --git a/arch/arm/mach-versatile/include/mach/gpio.h b/arch/arm/mach-versatile/include/mach/gpio.h
new file mode 100644
index 00000000000..94ff27678a4
--- /dev/null
+++ b/arch/arm/mach-versatile/include/mach/gpio.h
@@ -0,0 +1,6 @@
+#include <asm-generic/gpio.h>
+
+#define gpio_get_value	__gpio_get_value
+#define gpio_set_value	__gpio_set_value
+#define gpio_cansleep	__gpio_cansleep
+#define gpio_to_irq	__gpio_to_irq
diff --git a/arch/arm/mach-versatile/include/mach/irqs.h b/arch/arm/mach-versatile/include/mach/irqs.h
index 9bfdb30e1f3..bf44c61bd1f 100644
--- a/arch/arm/mach-versatile/include/mach/irqs.h
+++ b/arch/arm/mach-versatile/include/mach/irqs.h
@@ -122,4 +122,13 @@
 #define IRQ_SIC_PCI3		(IRQ_SIC_START + SIC_INT_PCI3)
 #define IRQ_SIC_END		63
 
-#define NR_IRQS			64
+#define IRQ_GPIO0_START		(IRQ_SIC_END + 1)
+#define IRQ_GPIO0_END		(IRQ_GPIO0_START + 31)
+#define IRQ_GPIO1_START		(IRQ_GPIO0_END + 1)
+#define IRQ_GPIO1_END		(IRQ_GPIO1_START + 31)
+#define IRQ_GPIO2_START		(IRQ_GPIO1_END + 1)
+#define IRQ_GPIO2_END		(IRQ_GPIO2_START + 31)
+#define IRQ_GPIO3_START		(IRQ_GPIO2_END + 1)
+#define IRQ_GPIO3_END		(IRQ_GPIO3_START + 31)
+
+#define NR_IRQS			(IRQ_GPIO3_END + 1)
diff --git a/arch/arm/mach-versatile/versatile_pb.c b/arch/arm/mach-versatile/versatile_pb.c
index aa051c0884f..7419451fdf0 100644
--- a/arch/arm/mach-versatile/versatile_pb.c
+++ b/arch/arm/mach-versatile/versatile_pb.c
@@ -23,6 +23,7 @@
 #include <linux/device.h>
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
+#include <linux/amba/pl061.h>
 #include <linux/io.h>
 
 #include <mach/hardware.h>
@@ -45,6 +46,16 @@ static struct mmc_platform_data mmc1_plat_data = {
 	.status		= mmc_status,
 };
 
+static struct pl061_platform_data gpio2_plat_data = {
+	.gpio_base	= 16,
+	.irq_base	= IRQ_GPIO2_START,
+};
+
+static struct pl061_platform_data gpio3_plat_data = {
+	.gpio_base	= 24,
+	.irq_base	= IRQ_GPIO3_START,
+};
+
 #define UART3_IRQ	{ IRQ_SIC_UART3, NO_IRQ }
 #define UART3_DMA	{ 0x86, 0x87 }
 #define SCI1_IRQ	{ IRQ_SIC_SCI3, NO_IRQ }
@@ -70,8 +81,8 @@ AMBA_DEVICE(sci1,  "fpga:0a", SCI1,     NULL);
 AMBA_DEVICE(mmc1,  "fpga:0b", MMCI1,    &mmc1_plat_data);
 
 /* DevChip Primecells */
-AMBA_DEVICE(gpio2, "dev:e6",  GPIO2,    NULL);
-AMBA_DEVICE(gpio3, "dev:e7",  GPIO3,    NULL);
+AMBA_DEVICE(gpio2, "dev:e6",  GPIO2,    &gpio2_plat_data);
+AMBA_DEVICE(gpio3, "dev:e7",  GPIO3,    &gpio3_plat_data);
 
 static struct amba_device *amba_devs[] __initdata = {
 	&uart3_device,
-- 
cgit v1.2.3


From eb7fffa39a3f114832df54a3e373d7580d8fe757 Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Sun, 5 Jul 2009 22:41:31 +0100
Subject: [ARM] realview: add PL061 gpiolib support

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/Kconfig                           |  1 +
 arch/arm/mach-realview/include/mach/gpio.h |  6 ++++++
 arch/arm/mach-realview/realview_eb.c       | 22 +++++++++++++++++++---
 arch/arm/mach-realview/realview_pb1176.c   | 22 +++++++++++++++++++---
 arch/arm/mach-realview/realview_pb11mp.c   | 22 +++++++++++++++++++---
 arch/arm/mach-realview/realview_pba8.c     | 22 +++++++++++++++++++---
 arch/arm/mach-realview/realview_pbx.c      | 22 +++++++++++++++++++---
 7 files changed, 102 insertions(+), 15 deletions(-)
 create mode 100644 arch/arm/mach-realview/include/mach/gpio.h

(limited to 'arch')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index e4971e4fa56..0dd29eb4a0e 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -217,6 +217,7 @@ config ARCH_REALVIEW
 	select ICST307
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
+	select ARCH_WANT_OPTIONAL_GPIOLIB
 	help
 	  This enables support for ARM Ltd RealView boards.
 
diff --git a/arch/arm/mach-realview/include/mach/gpio.h b/arch/arm/mach-realview/include/mach/gpio.h
new file mode 100644
index 00000000000..94ff27678a4
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/gpio.h
@@ -0,0 +1,6 @@
+#include <asm-generic/gpio.h>
+
+#define gpio_get_value	__gpio_get_value
+#define gpio_set_value	__gpio_set_value
+#define gpio_cansleep	__gpio_cansleep
+#define gpio_to_irq	__gpio_to_irq
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index 8dfa44e08a9..abd13b44867 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -23,6 +23,7 @@
 #include <linux/platform_device.h>
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
+#include <linux/amba/pl061.h>
 #include <linux/io.h>
 
 #include <mach/hardware.h>
@@ -113,6 +114,21 @@ static void __init realview_eb_map_io(void)
 		iotable_init(realview_eb11mp_io_desc, ARRAY_SIZE(realview_eb11mp_io_desc));
 }
 
+static struct pl061_platform_data gpio0_plat_data = {
+	.gpio_base	= 0,
+	.irq_base	= -1,
+};
+
+static struct pl061_platform_data gpio1_plat_data = {
+	.gpio_base	= 8,
+	.irq_base	= -1,
+};
+
+static struct pl061_platform_data gpio2_plat_data = {
+	.gpio_base	= 16,
+	.irq_base	= -1,
+};
+
 /*
  * RealView EB AMBA devices
  */
@@ -189,9 +205,9 @@ AMBA_DEVICE(clcd,  "dev:20",  EB_CLCD,  &clcd_plat_data);
 AMBA_DEVICE(dmac,  "dev:30",  DMAC,     NULL);
 AMBA_DEVICE(sctl,  "dev:e0",  SCTL,     NULL);
 AMBA_DEVICE(wdog,  "dev:e1",  EB_WATCHDOG, NULL);
-AMBA_DEVICE(gpio0, "dev:e4",  EB_GPIO0, NULL);
-AMBA_DEVICE(gpio1, "dev:e5",  GPIO1,    NULL);
-AMBA_DEVICE(gpio2, "dev:e6",  GPIO2,    NULL);
+AMBA_DEVICE(gpio0, "dev:e4",  EB_GPIO0, &gpio0_plat_data);
+AMBA_DEVICE(gpio1, "dev:e5",  GPIO1,    &gpio1_plat_data);
+AMBA_DEVICE(gpio2, "dev:e6",  GPIO2,    &gpio2_plat_data);
 AMBA_DEVICE(rtc,   "dev:e8",  EB_RTC,   NULL);
 AMBA_DEVICE(sci0,  "dev:f0",  SCI,      NULL);
 AMBA_DEVICE(uart0, "dev:f1",  EB_UART0, NULL);
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index 25efe71a67c..17fbb0e889b 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -23,6 +23,7 @@
 #include <linux/platform_device.h>
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
+#include <linux/amba/pl061.h>
 #include <linux/io.h>
 
 #include <mach/hardware.h>
@@ -107,6 +108,21 @@ static void __init realview_pb1176_map_io(void)
 	iotable_init(realview_pb1176_io_desc, ARRAY_SIZE(realview_pb1176_io_desc));
 }
 
+static struct pl061_platform_data gpio0_plat_data = {
+	.gpio_base	= 0,
+	.irq_base	= -1,
+};
+
+static struct pl061_platform_data gpio1_plat_data = {
+	.gpio_base	= 8,
+	.irq_base	= -1,
+};
+
+static struct pl061_platform_data gpio2_plat_data = {
+	.gpio_base	= 16,
+	.irq_base	= -1,
+};
+
 /*
  * RealView PB1176 AMBA devices
  */
@@ -164,9 +180,9 @@ AMBA_DEVICE(uart3,	"fpga:09",	PB1176_UART3,	NULL);
 AMBA_DEVICE(smc,	"dev:00",	PB1176_SMC,	NULL);
 AMBA_DEVICE(sctl,	"dev:e0",	SCTL,		NULL);
 AMBA_DEVICE(wdog,	"dev:e1",	PB1176_WATCHDOG,	NULL);
-AMBA_DEVICE(gpio0,	"dev:e4",	PB1176_GPIO0,	NULL);
-AMBA_DEVICE(gpio1,	"dev:e5",	GPIO1,		NULL);
-AMBA_DEVICE(gpio2,	"dev:e6",	GPIO2,		NULL);
+AMBA_DEVICE(gpio0,	"dev:e4",	PB1176_GPIO0,	&gpio0_plat_data);
+AMBA_DEVICE(gpio1,	"dev:e5",	GPIO1,		&gpio1_plat_data);
+AMBA_DEVICE(gpio2,	"dev:e6",	GPIO2,		&gpio2_plat_data);
 AMBA_DEVICE(rtc,	"dev:e8",	PB1176_RTC,	NULL);
 AMBA_DEVICE(sci0,	"dev:f0",	SCI,		NULL);
 AMBA_DEVICE(uart0,	"dev:f1",	PB1176_UART0,	NULL);
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index dc4b1694390..fdd042b85f4 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -23,6 +23,7 @@
 #include <linux/platform_device.h>
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
+#include <linux/amba/pl061.h>
 #include <linux/io.h>
 
 #include <mach/hardware.h>
@@ -108,6 +109,21 @@ static void __init realview_pb11mp_map_io(void)
 	iotable_init(realview_pb11mp_io_desc, ARRAY_SIZE(realview_pb11mp_io_desc));
 }
 
+static struct pl061_platform_data gpio0_plat_data = {
+	.gpio_base	= 0,
+	.irq_base	= -1,
+};
+
+static struct pl061_platform_data gpio1_plat_data = {
+	.gpio_base	= 8,
+	.irq_base	= -1,
+};
+
+static struct pl061_platform_data gpio2_plat_data = {
+	.gpio_base	= 16,
+	.irq_base	= -1,
+};
+
 /*
  * RealView PB11MPCore AMBA devices
  */
@@ -166,9 +182,9 @@ AMBA_DEVICE(uart3,	"fpga:09",	PB11MP_UART3,	NULL);
 AMBA_DEVICE(smc,	"dev:00",	PB11MP_SMC,	NULL);
 AMBA_DEVICE(sctl,	"dev:e0",	SCTL,		NULL);
 AMBA_DEVICE(wdog,	"dev:e1",	PB11MP_WATCHDOG, NULL);
-AMBA_DEVICE(gpio0,	"dev:e4",	PB11MP_GPIO0,	NULL);
-AMBA_DEVICE(gpio1,	"dev:e5",	GPIO1,		NULL);
-AMBA_DEVICE(gpio2,	"dev:e6",	GPIO2,		NULL);
+AMBA_DEVICE(gpio0,	"dev:e4",	PB11MP_GPIO0,	&gpio0_plat_data);
+AMBA_DEVICE(gpio1,	"dev:e5",	GPIO1,		&gpio1_plat_data);
+AMBA_DEVICE(gpio2,	"dev:e6",	GPIO2,		&gpio2_plat_data);
 AMBA_DEVICE(rtc,	"dev:e8",	PB11MP_RTC,	NULL);
 AMBA_DEVICE(sci0,	"dev:f0",	SCI,		NULL);
 AMBA_DEVICE(uart0,	"dev:f1",	PB11MP_UART0,	NULL);
diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c
index d6ac1eb8657..70bba9900d9 100644
--- a/arch/arm/mach-realview/realview_pba8.c
+++ b/arch/arm/mach-realview/realview_pba8.c
@@ -23,6 +23,7 @@
 #include <linux/platform_device.h>
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
+#include <linux/amba/pl061.h>
 #include <linux/io.h>
 
 #include <asm/irq.h>
@@ -98,6 +99,21 @@ static void __init realview_pba8_map_io(void)
 	iotable_init(realview_pba8_io_desc, ARRAY_SIZE(realview_pba8_io_desc));
 }
 
+static struct pl061_platform_data gpio0_plat_data = {
+	.gpio_base	= 0,
+	.irq_base	= -1,
+};
+
+static struct pl061_platform_data gpio1_plat_data = {
+	.gpio_base	= 8,
+	.irq_base	= -1,
+};
+
+static struct pl061_platform_data gpio2_plat_data = {
+	.gpio_base	= 16,
+	.irq_base	= -1,
+};
+
 /*
  * RealView PBA8Core AMBA devices
  */
@@ -156,9 +172,9 @@ AMBA_DEVICE(uart3,	"fpga:09",	PBA8_UART3,	NULL);
 AMBA_DEVICE(smc,	"dev:00",	PBA8_SMC,	NULL);
 AMBA_DEVICE(sctl,	"dev:e0",	SCTL,		NULL);
 AMBA_DEVICE(wdog,	"dev:e1",	PBA8_WATCHDOG, NULL);
-AMBA_DEVICE(gpio0,	"dev:e4",	PBA8_GPIO0,	NULL);
-AMBA_DEVICE(gpio1,	"dev:e5",	GPIO1,		NULL);
-AMBA_DEVICE(gpio2,	"dev:e6",	GPIO2,		NULL);
+AMBA_DEVICE(gpio0,	"dev:e4",	PBA8_GPIO0,	&gpio0_plat_data);
+AMBA_DEVICE(gpio1,	"dev:e5",	GPIO1,		&gpio1_plat_data);
+AMBA_DEVICE(gpio2,	"dev:e6",	GPIO2,		&gpio2_plat_data);
 AMBA_DEVICE(rtc,	"dev:e8",	PBA8_RTC,	NULL);
 AMBA_DEVICE(sci0,	"dev:f0",	SCI,		NULL);
 AMBA_DEVICE(uart0,	"dev:f1",	PBA8_UART0,	NULL);
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
index ede2a57240a..ce6c5d25fbe 100644
--- a/arch/arm/mach-realview/realview_pbx.c
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -22,6 +22,7 @@
 #include <linux/platform_device.h>
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
+#include <linux/amba/pl061.h>
 #include <linux/io.h>
 
 #include <asm/irq.h>
@@ -118,6 +119,21 @@ static void __init realview_pbx_map_io(void)
 		iotable_init(realview_local_io_desc, ARRAY_SIZE(realview_local_io_desc));
 }
 
+static struct pl061_platform_data gpio0_plat_data = {
+	.gpio_base	= 0,
+	.irq_base	= -1,
+};
+
+static struct pl061_platform_data gpio1_plat_data = {
+	.gpio_base	= 8,
+	.irq_base	= -1,
+};
+
+static struct pl061_platform_data gpio2_plat_data = {
+	.gpio_base	= 16,
+	.irq_base	= -1,
+};
+
 /*
  * RealView PBXCore AMBA devices
  */
@@ -176,9 +192,9 @@ AMBA_DEVICE(uart3,	"fpga:09",	PBX_UART3,	NULL);
 AMBA_DEVICE(smc,	"dev:00",	PBX_SMC,	NULL);
 AMBA_DEVICE(sctl,	"dev:e0",	SCTL,		NULL);
 AMBA_DEVICE(wdog,	"dev:e1",	PBX_WATCHDOG, 	NULL);
-AMBA_DEVICE(gpio0,	"dev:e4",	PBX_GPIO0,	NULL);
-AMBA_DEVICE(gpio1,	"dev:e5",	GPIO1,		NULL);
-AMBA_DEVICE(gpio2,	"dev:e6",	GPIO2,		NULL);
+AMBA_DEVICE(gpio0,	"dev:e4",	PBX_GPIO0,	&gpio0_plat_data);
+AMBA_DEVICE(gpio1,	"dev:e5",	GPIO1,		&gpio1_plat_data);
+AMBA_DEVICE(gpio2,	"dev:e6",	GPIO2,		&gpio2_plat_data);
 AMBA_DEVICE(rtc,	"dev:e8",	PBX_RTC,	NULL);
 AMBA_DEVICE(sci0,	"dev:f0",	SCI,		NULL);
 AMBA_DEVICE(uart0,	"dev:f1",	PBX_UART0,	NULL);
-- 
cgit v1.2.3


From 1dcdd0911b5553f0282ce8525773955b59a56919 Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Thu, 9 Jul 2009 11:27:40 +0900
Subject: microblaze: include EXIT_TEXT to _stext

Microblaze wants to throw out EXIT_TEXT during runtime too.  This
hasn't caused trouble till now because the linker script didn't
discard EXIT_TEXT and it ended up in its default output section.  As
discard definition is about to be unified, include EXIT_TEXT into
_stext explicitly and while at it replace explicit exitcall definition
to EXIT_CALL.

Signed-off-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/microblaze/kernel/vmlinux.lds.S | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/microblaze/kernel/vmlinux.lds.S b/arch/microblaze/kernel/vmlinux.lds.S
index a207543c592..81bebdcb18f 100644
--- a/arch/microblaze/kernel/vmlinux.lds.S
+++ b/arch/microblaze/kernel/vmlinux.lds.S
@@ -23,8 +23,8 @@ SECTIONS {
 		_stext = . ;
 		*(.text .text.*)
 		*(.fixup)
-
-		*(.exitcall.exit)
+               EXIT_TEXT
+               EXIT_CALL
 		SCHED_TEXT
 		LOCK_TEXT
 		KPROBES_TEXT
-- 
cgit v1.2.3


From 023bf6f1b8bf58dc4da7f0dc1cf4787b0d5297c1 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Thu, 9 Jul 2009 11:27:40 +0900
Subject: linker script: unify usage of discard definition

Discarded sections in different archs share some commonality but have
considerable differences.  This led to linker script for each arch
implementing its own /DISCARD/ definition, which makes maintaining
tedious and adding new entries error-prone.

This patch makes all linker scripts to move discard definitions to the
end of the linker script and use the common DISCARDS macro.  As ld
uses the first matching section definition, archs can include default
discarded sections by including them earlier in the linker script.

ia64 is notable because it first throws away some ia64 specific
subsections and then include the rest of the sections into the final
image, so those sections must be discarded before the inclusion.

defconfig compile tested for x86, x86-64, powerpc, powerpc64, ia64,
alpha, sparc, sparc64 and s390.  Michal Simek tested microblaze.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Tested-by: Michal Simek <monstr@monstr.eu>
Cc: linux-arch@vger.kernel.org
Cc: Michal Simek <monstr@monstr.eu>
Cc: microblaze-uclinux@itee.uq.edu.au
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Tony Luck <tony.luck@intel.com>
---
 arch/alpha/kernel/vmlinux.lds.S      | 10 ++--------
 arch/avr32/kernel/vmlinux.lds.S      | 10 +++-------
 arch/blackfin/kernel/vmlinux.lds.S   |  6 +-----
 arch/cris/kernel/vmlinux.lds.S       | 10 ++--------
 arch/frv/kernel/vmlinux.lds.S        |  2 +-
 arch/h8300/kernel/vmlinux.lds.S      |  6 ++----
 arch/ia64/kernel/vmlinux.lds.S       | 17 ++++++++---------
 arch/m32r/kernel/vmlinux.lds.S       | 11 +++--------
 arch/m68k/kernel/vmlinux-std.lds     | 11 +++--------
 arch/m68k/kernel/vmlinux-sun3.lds    | 10 ++--------
 arch/m68knommu/kernel/vmlinux.lds.S  |  8 +-------
 arch/microblaze/kernel/vmlinux.lds.S |  2 +-
 arch/mips/kernel/vmlinux.lds.S       | 22 ++++++++++------------
 arch/mn10300/kernel/vmlinux.lds.S    |  9 +++------
 arch/parisc/kernel/vmlinux.lds.S     |  9 ++++-----
 arch/powerpc/kernel/vmlinux.lds.S    | 10 +++-------
 arch/s390/kernel/vmlinux.lds.S       | 10 +++-------
 arch/sh/kernel/vmlinux.lds.S         | 11 ++++-------
 arch/sparc/kernel/vmlinux.lds.S      |  9 ++-------
 arch/um/include/asm/common.lds.S     |  5 -----
 arch/um/kernel/dyn.lds.S             |  2 +-
 arch/um/kernel/uml.lds.S             |  2 +-
 arch/x86/kernel/vmlinux.lds.S        | 11 ++++-------
 arch/xtensa/kernel/vmlinux.lds.S     | 14 ++++----------
 24 files changed, 68 insertions(+), 149 deletions(-)

(limited to 'arch')

diff --git a/arch/alpha/kernel/vmlinux.lds.S b/arch/alpha/kernel/vmlinux.lds.S
index 75fe1d6877e..6dc03c35caa 100644
--- a/arch/alpha/kernel/vmlinux.lds.S
+++ b/arch/alpha/kernel/vmlinux.lds.S
@@ -134,14 +134,6 @@ SECTIONS
 	__bss_stop = .;
 	_end = .;
 
-	/* Sections to be discarded */
-	/DISCARD/ : {
-		EXIT_TEXT
-		EXIT_DATA
-		*(.exitcall.exit)
-		*(.discard)
-	}
-
 	.mdebug 0 : {
 		*(.mdebug)
 	}
@@ -151,4 +143,6 @@ SECTIONS
 
 	STABS_DEBUG
 	DWARF_DEBUG
+
+	DISCARDS
 }
diff --git a/arch/avr32/kernel/vmlinux.lds.S b/arch/avr32/kernel/vmlinux.lds.S
index b8324608ec0..c4b56654349 100644
--- a/arch/avr32/kernel/vmlinux.lds.S
+++ b/arch/avr32/kernel/vmlinux.lds.S
@@ -124,15 +124,11 @@ SECTIONS
 		_end = .;
 	}
 
+	DWARF_DEBUG
+
 	/* When something in the kernel is NOT compiled as a module, the module
 	 * cleanup code and data are put into these segments. Both can then be
 	 * thrown away, as cleanup code is never called unless it's a module.
 	 */
-	/DISCARD/       	: {
-		EXIT_DATA
-		*(.exitcall.exit)
-		*(.discard)
-	}
-
-	DWARF_DEBUG
+	DISCARDS
 }
diff --git a/arch/blackfin/kernel/vmlinux.lds.S b/arch/blackfin/kernel/vmlinux.lds.S
index 6e8eabd8f0a..d7ffe299b97 100644
--- a/arch/blackfin/kernel/vmlinux.lds.S
+++ b/arch/blackfin/kernel/vmlinux.lds.S
@@ -277,9 +277,5 @@ SECTIONS
 
 	DWARF_DEBUG
 
-	/DISCARD/ :
-	{
-		*(.exitcall.exit)
-		*(.discard)
-	}
+	DISCARDS
 }
diff --git a/arch/cris/kernel/vmlinux.lds.S b/arch/cris/kernel/vmlinux.lds.S
index a3175ebb38c..6c81836b922 100644
--- a/arch/cris/kernel/vmlinux.lds.S
+++ b/arch/cris/kernel/vmlinux.lds.S
@@ -140,13 +140,7 @@ SECTIONS
 	_end = .;
 	__end = .;
 
-	/* Sections to be discarded */
-	/DISCARD/ : {
-		EXIT_TEXT
-		EXIT_DATA
-		*(.exitcall.exit)
-		*(.discard)
-        }
-
 	dram_end = dram_start + (CONFIG_ETRAX_DRAM_SIZE - __CONFIG_ETRAX_VMEM_SIZE)*1024*1024;
+
+	DISCARDS
 }
diff --git a/arch/frv/kernel/vmlinux.lds.S b/arch/frv/kernel/vmlinux.lds.S
index 64b5a5e4d35..7dbf41f68b5 100644
--- a/arch/frv/kernel/vmlinux.lds.S
+++ b/arch/frv/kernel/vmlinux.lds.S
@@ -178,7 +178,7 @@ SECTIONS
 
   .comment 0 : { *(.comment) }
 
-  /DISCARD/ : { *(.discard) }
+  DISCARDS
 }
 
 __kernel_image_size_no_bss = __bss_start - __kernel_image_start;
diff --git a/arch/h8300/kernel/vmlinux.lds.S b/arch/h8300/kernel/vmlinux.lds.S
index 03d6c0df33d..662b02ecb86 100644
--- a/arch/h8300/kernel/vmlinux.lds.S
+++ b/arch/h8300/kernel/vmlinux.lds.S
@@ -152,10 +152,6 @@ SECTIONS
 	__end = . ;
 	__ramstart = .;
 	}
-	/DISCARD/ : {
-		*(.exitcall.exit)
-		*(.discard)
-	}
         .romfs :	
 	{
 		*(.romfs*)
@@ -166,4 +162,6 @@ SECTIONS
 	COMMAND_START = . - 0x200 ;
 	__ramend = . ;
 	}
+
+	DISCARDS
 }
diff --git a/arch/ia64/kernel/vmlinux.lds.S b/arch/ia64/kernel/vmlinux.lds.S
index 13d95897587..eb4214d1c5a 100644
--- a/arch/ia64/kernel/vmlinux.lds.S
+++ b/arch/ia64/kernel/vmlinux.lds.S
@@ -24,15 +24,14 @@ PHDRS {
 }
 SECTIONS
 {
-  /* Sections to be discarded */
+  /* unwind exit sections must be discarded before the rest of the
+     sections get included. */
   /DISCARD/ : {
-	EXIT_TEXT
-	EXIT_DATA
-	*(.exitcall.exit)
-	*(.discard)
 	*(.IA_64.unwind.exit.text)
 	*(.IA_64.unwind_info.exit.text)
-	}
+	*(.comment)
+	*(.note)
+  }
 
   v = PAGE_OFFSET;	/* this symbol is here to make debugging easier... */
   phys_start = _start - LOAD_OFFSET;
@@ -317,7 +316,7 @@ SECTIONS
   .debug_funcnames 0 : { *(.debug_funcnames) }
   .debug_typenames 0 : { *(.debug_typenames) }
   .debug_varnames  0 : { *(.debug_varnames) }
-  /* These must appear regardless of  .  */
-  /DISCARD/ : { *(.comment) }
-  /DISCARD/ : { *(.note) }
+
+  /* Default discards */
+  DISCARDS
 }
diff --git a/arch/m32r/kernel/vmlinux.lds.S b/arch/m32r/kernel/vmlinux.lds.S
index 480a49944cf..de5e21cca6a 100644
--- a/arch/m32r/kernel/vmlinux.lds.S
+++ b/arch/m32r/kernel/vmlinux.lds.S
@@ -120,14 +120,6 @@ SECTIONS
 
   _end = . ;
 
-  /* Sections to be discarded */
-  /DISCARD/ : {
-	EXIT_TEXT
-	EXIT_DATA
-	*(.exitcall.exit)
-	*(.discard)
-	}
-
   /* Stabs debugging sections.  */
   .stab 0 : { *(.stab) }
   .stabstr 0 : { *(.stabstr) }
@@ -136,4 +128,7 @@ SECTIONS
   .stab.index 0 : { *(.stab.index) }
   .stab.indexstr 0 : { *(.stab.indexstr) }
   .comment 0 : { *(.comment) }
+
+  /* Sections to be discarded */
+  DISCARDS
 }
diff --git a/arch/m68k/kernel/vmlinux-std.lds b/arch/m68k/kernel/vmlinux-std.lds
index 905a797ada9..47eac19e8f6 100644
--- a/arch/m68k/kernel/vmlinux-std.lds
+++ b/arch/m68k/kernel/vmlinux-std.lds
@@ -82,14 +82,6 @@ SECTIONS
 
   _end = . ;
 
-  /* Sections to be discarded */
-  /DISCARD/ : {
-	EXIT_TEXT
-	EXIT_DATA
-	*(.exitcall.exit)
-	*(.discard)
-	}
-
   /* Stabs debugging sections.  */
   .stab 0 : { *(.stab) }
   .stabstr 0 : { *(.stabstr) }
@@ -98,4 +90,7 @@ SECTIONS
   .stab.index 0 : { *(.stab.index) }
   .stab.indexstr 0 : { *(.stab.indexstr) }
   .comment 0 : { *(.comment) }
+
+  /* Sections to be discarded */
+  DISCARDS
 }
diff --git a/arch/m68k/kernel/vmlinux-sun3.lds b/arch/m68k/kernel/vmlinux-sun3.lds
index 47d04be322a..03efaf04d7d 100644
--- a/arch/m68k/kernel/vmlinux-sun3.lds
+++ b/arch/m68k/kernel/vmlinux-sun3.lds
@@ -77,14 +77,6 @@ __init_begin = .;
 
   _end = . ;
 
-  /* Sections to be discarded */
-  /DISCARD/ : {
-	EXIT_TEXT
-	EXIT_DATA
-	*(.exitcall.exit)
-	*(.discard)
-	}
-
   .crap : {
 	/* Stabs debugging sections.  */
 	*(.stab)
@@ -97,4 +89,6 @@ __init_begin = .;
 	*(.note)
   }
 
+  /* Sections to be discarded */
+  DISCARDS
 }
diff --git a/arch/m68knommu/kernel/vmlinux.lds.S b/arch/m68knommu/kernel/vmlinux.lds.S
index 68111a61a77..2736a5e309c 100644
--- a/arch/m68knommu/kernel/vmlinux.lds.S
+++ b/arch/m68knommu/kernel/vmlinux.lds.S
@@ -184,13 +184,6 @@ SECTIONS {
 		__init_end = .;
 	} > INIT
 
-	/DISCARD/ : {
-		EXIT_TEXT
-		EXIT_DATA
-		*(.exitcall.exit)
-		*(.discard)
-	}
-
 	.bss : {
 		. = ALIGN(4);
 		_sbss = . ;
@@ -201,5 +194,6 @@ SECTIONS {
 	 	_end = . ;
 	} > BSS
 
+	DISCARDS
 }
 
diff --git a/arch/microblaze/kernel/vmlinux.lds.S b/arch/microblaze/kernel/vmlinux.lds.S
index 81bebdcb18f..ec5fa91a48d 100644
--- a/arch/microblaze/kernel/vmlinux.lds.S
+++ b/arch/microblaze/kernel/vmlinux.lds.S
@@ -163,5 +163,5 @@ SECTIONS {
 	. = ALIGN(4096);
 	_end = .;
 
-	/DISCARD/ : { *(.discard) }
+	DISCARDS
 }
diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S
index 45901609b74..1474c18fb77 100644
--- a/arch/mips/kernel/vmlinux.lds.S
+++ b/arch/mips/kernel/vmlinux.lds.S
@@ -176,18 +176,6 @@ SECTIONS
 
 	_end = . ;
 
-	/* Sections to be discarded */
-	/DISCARD/ : {
-		*(.exitcall.exit)
-		*(.discard)
-
-		/* ABI crap starts here */
-		*(.MIPS.options)
-		*(.options)
-		*(.pdr)
-		*(.reginfo)
-	}
-
 	/* These mark the ABI of the kernel for debuggers.  */
 	.mdebug.abi32 : {
 		KEEP(*(.mdebug.abi32))
@@ -213,4 +201,14 @@ SECTIONS
 		*(.gptab.bss)
 		*(.gptab.sbss)
 	}
+
+	/* Sections to be discarded */
+	DISCARDS
+	/DISCARD/ : {
+		/* ABI crap starts here */
+		*(.MIPS.options)
+		*(.options)
+		*(.pdr)
+		*(.reginfo)
+	}
 }
diff --git a/arch/mn10300/kernel/vmlinux.lds.S b/arch/mn10300/kernel/vmlinux.lds.S
index 5609d4962a5..8fcd0f1e21d 100644
--- a/arch/mn10300/kernel/vmlinux.lds.S
+++ b/arch/mn10300/kernel/vmlinux.lds.S
@@ -115,13 +115,10 @@ SECTIONS
   . = ALIGN(PAGE_SIZE);
   pg0 = .;
 
-  /* Sections to be discarded */
-  /DISCARD/ : {
-	EXIT_CALL
-	*(.discard)
-	}
-
   STABS_DEBUG
 
   DWARF_DEBUG
+
+  /* Sections to be discarded */
+  DISCARDS
 }
diff --git a/arch/parisc/kernel/vmlinux.lds.S b/arch/parisc/kernel/vmlinux.lds.S
index ccf58341845..aea1784edbd 100644
--- a/arch/parisc/kernel/vmlinux.lds.S
+++ b/arch/parisc/kernel/vmlinux.lds.S
@@ -237,10 +237,12 @@ SECTIONS
 	/* freed after init ends here */
 	_end = . ;
 
+	STABS_DEBUG
+	.note 0 : { *(.note) }
+
 	/* Sections to be discarded */
+	DISCARDS
 	/DISCARD/ : {
-		*(.exitcall.exit)
-		*(.discard)
 #ifdef CONFIG_64BIT
 		/* temporary hack until binutils is fixed to not emit these
 	 	 * for static binaries
@@ -253,7 +255,4 @@ SECTIONS
 		*(.gnu.hash)
 #endif
 	}
-
-	STABS_DEBUG
-	.note 0 : { *(.note) }	
 }
diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S
index 7fca9355fd3..244e3658983 100644
--- a/arch/powerpc/kernel/vmlinux.lds.S
+++ b/arch/powerpc/kernel/vmlinux.lds.S
@@ -37,13 +37,6 @@ jiffies = jiffies_64 + 4;
 #endif
 SECTIONS
 {
-	/* Sections to be discarded. */
-	/DISCARD/ : {
-	*(.exitcall.exit)
-	*(.discard)
-	EXIT_DATA
-	}
-
 	. = KERNELBASE;
 
 /*
@@ -299,4 +292,7 @@ SECTIONS
 	. = ALIGN(PAGE_SIZE);
 	_end = . ;
 	PROVIDE32 (end = .);
+
+	/* Sections to be discarded. */
+	DISCARDS
 }
diff --git a/arch/s390/kernel/vmlinux.lds.S b/arch/s390/kernel/vmlinux.lds.S
index 98867dfea46..82415c75b99 100644
--- a/arch/s390/kernel/vmlinux.lds.S
+++ b/arch/s390/kernel/vmlinux.lds.S
@@ -157,14 +157,10 @@ SECTIONS
 
 	_end = . ;
 
-	/* Sections to be discarded */
-	/DISCARD/ : {
-		EXIT_DATA
-		*(.exitcall.exit)
-		*(.discard)
-	}
-
 	/* Debugging sections.	*/
 	STABS_DEBUG
 	DWARF_DEBUG
+
+	/* Sections to be discarded */
+	DISCARDS
 }
diff --git a/arch/sh/kernel/vmlinux.lds.S b/arch/sh/kernel/vmlinux.lds.S
index 766976d27b2..0ce254bca92 100644
--- a/arch/sh/kernel/vmlinux.lds.S
+++ b/arch/sh/kernel/vmlinux.lds.S
@@ -163,17 +163,14 @@ SECTIONS
 		_end = . ;
 	}
 
+	STABS_DEBUG
+	DWARF_DEBUG
+
 	/*
 	 * When something in the kernel is NOT compiled as a module, the
 	 * module cleanup code and data are put into these segments. Both
 	 * can then be thrown away, as cleanup code is never called unless
 	 * it's a module.
 	 */
-	/DISCARD/ : {
-		*(.exitcall.exit)
-		*(.discard)
-	}
-
-	STABS_DEBUG
-	DWARF_DEBUG
+	DISCARDS
 }
diff --git a/arch/sparc/kernel/vmlinux.lds.S b/arch/sparc/kernel/vmlinux.lds.S
index d63cf914667..866390feb68 100644
--- a/arch/sparc/kernel/vmlinux.lds.S
+++ b/arch/sparc/kernel/vmlinux.lds.S
@@ -171,13 +171,8 @@ SECTIONS
 	}
 	_end = . ;
 
-	/DISCARD/ : {
-		EXIT_TEXT
-		EXIT_DATA
-		*(.exitcall.exit)
-		*(.discard)
-	}
-
 	STABS_DEBUG
 	DWARF_DEBUG
+
+	DISCARDS
 }
diff --git a/arch/um/include/asm/common.lds.S b/arch/um/include/asm/common.lds.S
index cb0248616d4..37ecc5577a9 100644
--- a/arch/um/include/asm/common.lds.S
+++ b/arch/um/include/asm/common.lds.S
@@ -123,8 +123,3 @@
 	__initramfs_end = .;
   }
 
-  /* Sections to be discarded */
-  /DISCARD/ : {
- 	*(.exitcall.exit)
-  }
-
diff --git a/arch/um/kernel/dyn.lds.S b/arch/um/kernel/dyn.lds.S
index 2916d6eadff..715a188c047 100644
--- a/arch/um/kernel/dyn.lds.S
+++ b/arch/um/kernel/dyn.lds.S
@@ -157,5 +157,5 @@ SECTIONS
 
   DWARF_DEBUG
 
-  /DISCARD/	: { *(.discard) }
+  DISCARDS
 }
diff --git a/arch/um/kernel/uml.lds.S b/arch/um/kernel/uml.lds.S
index 1f8a622cabe..2ebd39765db 100644
--- a/arch/um/kernel/uml.lds.S
+++ b/arch/um/kernel/uml.lds.S
@@ -101,5 +101,5 @@ SECTIONS
 
   DWARF_DEBUG
 
-  /DISCARD/	: { *(.discard) }
+  DISCARDS
 }
diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S
index 367e8788204..b600c843710 100644
--- a/arch/x86/kernel/vmlinux.lds.S
+++ b/arch/x86/kernel/vmlinux.lds.S
@@ -387,15 +387,12 @@ SECTIONS
 		_end = .;
 	}
 
-	/* Sections to be discarded */
-	/DISCARD/ : {
-		*(.exitcall.exit)
-		*(.eh_frame)
-		*(.discard)
-	}
-
         STABS_DEBUG
         DWARF_DEBUG
+
+	/* Sections to be discarded */
+	DISCARDS
+	/DISCARD/ : { *(.eh_frame) }
 }
 
 
diff --git a/arch/xtensa/kernel/vmlinux.lds.S b/arch/xtensa/kernel/vmlinux.lds.S
index b1e24638acd..921b6ff3b64 100644
--- a/arch/xtensa/kernel/vmlinux.lds.S
+++ b/arch/xtensa/kernel/vmlinux.lds.S
@@ -280,16 +280,6 @@ SECTIONS
     *(.ResetVector.text)
   }
 
-  /* Sections to be discarded */
-  /DISCARD/ :
-  {
-	*(.exit.literal)
-	EXIT_TEXT
-	EXIT_DATA
-        *(.exitcall.exit)
-	*(.discard)
-  }
-
   .xt.lit : { *(.xt.lit) }
   .xt.prop : { *(.xt.prop) }
 
@@ -322,4 +312,8 @@ SECTIONS
     *(.xt.lit)
     *(.gnu.linkonce.p*)
   }
+
+  /* Sections to be discarded */
+  DISCARDS
+  /DISCARD/ : { *(.exit.literal) }
 }
-- 
cgit v1.2.3


From 7fb2bbf4d9e7e62057184f1e061566459eef6c79 Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Thu, 9 Jul 2009 15:15:12 +0100
Subject: MMC: MMCI: allow GPIOs to be passed

Add and initialize the gpio_wp and gpio_cd members.  We need to
ensure that all users are covered, because GPIO 0 may be valid.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
---
 arch/arm/include/asm/mach/mmc.h          | 2 ++
 arch/arm/mach-integrator/integrator_cp.c | 2 ++
 arch/arm/mach-realview/core.c            | 4 ++++
 arch/arm/mach-u300/mmc.c                 | 2 ++
 arch/arm/mach-versatile/core.c           | 2 ++
 arch/arm/mach-versatile/versatile_pb.c   | 2 ++
 6 files changed, 14 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/include/asm/mach/mmc.h b/arch/arm/include/asm/mach/mmc.h
index 4da332b0314..b490ecc79de 100644
--- a/arch/arm/include/asm/mach/mmc.h
+++ b/arch/arm/include/asm/mach/mmc.h
@@ -10,6 +10,8 @@ struct mmc_platform_data {
 	unsigned int ocr_mask;			/* available voltages */
 	u32 (*translate_vdd)(struct device *, unsigned int);
 	unsigned int (*status)(struct device *);
+	int	gpio_wp;
+	int	gpio_cd;
 };
 
 #endif
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index 4ac04055c2e..69956cdae3c 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -403,6 +403,8 @@ static unsigned int mmc_status(struct device *dev)
 static struct mmc_platform_data mmc_data = {
 	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
 	.status		= mmc_status,
+	.gpio_wp	= -1,
+	.gpio_cd	= -1,
 };
 
 static struct amba_device mmc_device = {
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index 9ea9c05093c..17a07e6acfa 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -238,11 +238,15 @@ static unsigned int realview_mmc_status(struct device *dev)
 struct mmc_platform_data realview_mmc0_plat_data = {
 	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
 	.status		= realview_mmc_status,
+	.gpio_wp	= -1,
+	.gpio_cd	= -1,
 };
 
 struct mmc_platform_data realview_mmc1_plat_data = {
 	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
 	.status		= realview_mmc_status,
+	.gpio_wp	= -1,
+	.gpio_cd	= -1,
 };
 
 /*
diff --git a/arch/arm/mach-u300/mmc.c b/arch/arm/mach-u300/mmc.c
index 3138d3955c9..585cc013639 100644
--- a/arch/arm/mach-u300/mmc.c
+++ b/arch/arm/mach-u300/mmc.c
@@ -156,6 +156,8 @@ int __devinit mmc_init(struct amba_device *adev)
 	mmci_card->mmc0_plat_data.ocr_mask = MMC_VDD_28_29;
 	mmci_card->mmc0_plat_data.translate_vdd = mmc_translate_vdd;
 	mmci_card->mmc0_plat_data.status = mmc_status;
+	mmci_card->mmc0_plat_data.gpio_wp = -1;
+	mmci_card->mmc0_plat_data.gpio_cd = -1;
 
 	mmcsd_device->platform_data = (void *) &mmci_card->mmc0_plat_data;
 
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index 92273c95edf..afc0f87f3fa 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -373,6 +373,8 @@ unsigned int mmc_status(struct device *dev)
 static struct mmc_platform_data mmc0_plat_data = {
 	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
 	.status		= mmc_status,
+	.gpio_wp	= -1,
+	.gpio_cd	= -1,
 };
 
 /*
diff --git a/arch/arm/mach-versatile/versatile_pb.c b/arch/arm/mach-versatile/versatile_pb.c
index 7419451fdf0..9af8d8154df 100644
--- a/arch/arm/mach-versatile/versatile_pb.c
+++ b/arch/arm/mach-versatile/versatile_pb.c
@@ -44,6 +44,8 @@
 static struct mmc_platform_data mmc1_plat_data = {
 	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
 	.status		= mmc_status,
+	.gpio_wp	= -1,
+	.gpio_cd	= -1,
 };
 
 static struct pl061_platform_data gpio2_plat_data = {
-- 
cgit v1.2.3


From 02239f0a4264608686cc0015d906c7b2dead89df Mon Sep 17 00:00:00 2001
From: Hartley Sweeten <hartleys@visionengravers.com>
Date: Wed, 8 Jul 2009 02:00:49 +0100
Subject: [ARM] 5577/2: ep93xx: syscon locked register functions

Add core functions to handle writes to the ep93xx software locked
registers.

There are a number of registers in the EP93xx System Controller
that require a write to the software lock register before they
can be updated. This patch adds a number of exported functions
to the ep93xx core that handle this access.

The software locked clock divider registers, VidClkDiv, MIRClkDiv,
I2SClkDiv and KeyTchClkDiv would typically involve writing a
specific value to the register. To support this the
ep93xx_syscon_swlocked_write() function is provided.

For the DeviceCfg register it's more typical to only need to
set or clear a single bit. A generic ep93xx_devcfg_set_clear()
function is provided to handle both operations. Two inline
functions, ep93xx_devcfg_set_bits() and ep93xx_devcfg_clear_bits()
are also provided to improve code readability.

In addition, the remaining bits in the System Controller Device
Config Register have been documented and the previously defined
names shortened.

All code paths that use this functionality have been updated
except for arch/arm/kernel/crunch.c. That code is in a context
switch path, which is not reentrant, so it is safe against itself.

Cc: Lennert Buytenhek <buytenh@wantstofly.org>
Cc: Matthias Kaehlcke <matthias@kaehlcke.net>
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/kernel/crunch.c                        | 13 +++++--
 arch/arm/mach-ep93xx/clock.c                    | 24 +++++++-----
 arch/arm/mach-ep93xx/core.c                     | 52 ++++++++++++++++++++-----
 arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h | 36 ++++++++++++++---
 arch/arm/mach-ep93xx/include/mach/platform.h    | 16 ++++++++
 arch/arm/mach-ep93xx/include/mach/system.h      | 12 +++---
 6 files changed, 118 insertions(+), 35 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/kernel/crunch.c b/arch/arm/kernel/crunch.c
index 99995c2b231..769abe15cf9 100644
--- a/arch/arm/kernel/crunch.c
+++ b/arch/arm/kernel/crunch.c
@@ -31,7 +31,7 @@ void crunch_task_release(struct thread_info *thread)
 
 static int crunch_enabled(u32 devcfg)
 {
-	return !!(devcfg & EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE);
+	return !!(devcfg & EP93XX_SYSCON_DEVCFG_CPENA);
 }
 
 static int crunch_do(struct notifier_block *self, unsigned long cmd, void *t)
@@ -56,11 +56,16 @@ static int crunch_do(struct notifier_block *self, unsigned long cmd, void *t)
 		break;
 
 	case THREAD_NOTIFY_SWITCH:
-		devcfg = __raw_readl(EP93XX_SYSCON_DEVICE_CONFIG);
+		devcfg = __raw_readl(EP93XX_SYSCON_DEVCFG);
 		if (crunch_enabled(devcfg) || crunch_owner == crunch_state) {
-			devcfg ^= EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE;
+			/*
+			 * We don't use ep93xx_syscon_swlocked_write() here
+			 * because we are on the context switch path and
+			 * preemption is already disabled.
+			 */
+			devcfg ^= EP93XX_SYSCON_DEVCFG_CPENA;
 			__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
-			__raw_writel(devcfg, EP93XX_SYSCON_DEVICE_CONFIG);
+			__raw_writel(devcfg, EP93XX_SYSCON_DEVCFG);
 		}
 		break;
 	}
diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
index 6c4c1633ed1..c7642acfd02 100644
--- a/arch/arm/mach-ep93xx/clock.c
+++ b/arch/arm/mach-ep93xx/clock.c
@@ -50,20 +50,20 @@ static unsigned long get_uart_rate(struct clk *clk);
 
 static struct clk clk_uart1 = {
 	.sw_locked	= 1,
-	.enable_reg	= EP93XX_SYSCON_DEVICE_CONFIG,
-	.enable_mask	= EP93XX_SYSCON_DEVICE_CONFIG_U1EN,
+	.enable_reg	= EP93XX_SYSCON_DEVCFG,
+	.enable_mask	= EP93XX_SYSCON_DEVCFG_U1EN,
 	.get_rate	= get_uart_rate,
 };
 static struct clk clk_uart2 = {
 	.sw_locked	= 1,
-	.enable_reg	= EP93XX_SYSCON_DEVICE_CONFIG,
-	.enable_mask	= EP93XX_SYSCON_DEVICE_CONFIG_U2EN,
+	.enable_reg	= EP93XX_SYSCON_DEVCFG,
+	.enable_mask	= EP93XX_SYSCON_DEVCFG_U2EN,
 	.get_rate	= get_uart_rate,
 };
 static struct clk clk_uart3 = {
 	.sw_locked	= 1,
-	.enable_reg	= EP93XX_SYSCON_DEVICE_CONFIG,
-	.enable_mask	= EP93XX_SYSCON_DEVICE_CONFIG_U3EN,
+	.enable_reg	= EP93XX_SYSCON_DEVCFG,
+	.enable_mask	= EP93XX_SYSCON_DEVCFG_U3EN,
 	.get_rate	= get_uart_rate,
 };
 static struct clk clk_pll1;
@@ -160,9 +160,11 @@ int clk_enable(struct clk *clk)
 		u32 value;
 
 		value = __raw_readl(clk->enable_reg);
+		value |= clk->enable_mask;
 		if (clk->sw_locked)
-			__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
-		__raw_writel(value | clk->enable_mask, clk->enable_reg);
+			ep93xx_syscon_swlocked_write(value, clk->enable_reg);
+		else
+			__raw_writel(value, clk->enable_reg);
 	}
 
 	return 0;
@@ -175,9 +177,11 @@ void clk_disable(struct clk *clk)
 		u32 value;
 
 		value = __raw_readl(clk->enable_reg);
+		value &= ~clk->enable_mask;
 		if (clk->sw_locked)
-			__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
-		__raw_writel(value & ~clk->enable_mask, clk->enable_reg);
+			ep93xx_syscon_swlocked_write(value, clk->enable_reg);
+		else
+			__raw_writel(value, clk->enable_reg);
 	}
 }
 EXPORT_SYMBOL(clk_disable);
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 204dc5cbd0b..9399d3af990 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -384,6 +384,47 @@ void __init ep93xx_init_irq(void)
 }
 
 
+/*************************************************************************
+ * EP93xx System Controller Software Locked register handling
+ *************************************************************************/
+
+/*
+ * syscon_swlock prevents anything else from writing to the syscon
+ * block while a software locked register is being written.
+ */
+static DEFINE_SPINLOCK(syscon_swlock);
+
+void ep93xx_syscon_swlocked_write(unsigned int val, unsigned int reg)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&syscon_swlock, flags);
+
+	__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
+	__raw_writel(val, reg);
+
+	spin_unlock_irqrestore(&syscon_swlock, flags);
+}
+EXPORT_SYMBOL(ep93xx_syscon_swlocked_write);
+
+void ep93xx_devcfg_set_clear(unsigned int set_bits, unsigned int clear_bits)
+{
+	unsigned long flags;
+	unsigned int val;
+
+	spin_lock_irqsave(&syscon_swlock, flags);
+
+	val = __raw_readl(EP93XX_SYSCON_DEVCFG);
+	val |= set_bits;
+	val &= ~clear_bits;
+	__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
+	__raw_writel(val, EP93XX_SYSCON_DEVCFG);
+
+	spin_unlock_irqrestore(&syscon_swlock, flags);
+}
+EXPORT_SYMBOL(ep93xx_devcfg_set_clear);
+
+
 /*************************************************************************
  * EP93xx peripheral handling
  *************************************************************************/
@@ -550,15 +591,8 @@ extern void ep93xx_gpio_init(void);
 
 void __init ep93xx_init_devices(void)
 {
-	unsigned int v;
-
-	/*
-	 * Disallow access to MaverickCrunch initially.
-	 */
-	v = __raw_readl(EP93XX_SYSCON_DEVICE_CONFIG);
-	v &= ~EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE;
-	__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
-	__raw_writel(v, EP93XX_SYSCON_DEVICE_CONFIG);
+	/* Disallow access to MaverickCrunch initially */
+	ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_CPENA);
 
 	ep93xx_gpio_init();
 
diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
index 49b256b3ddf..087d22b8f35 100644
--- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
+++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
@@ -175,11 +175,37 @@
 #define EP93XX_SYSCON_STANDBY		EP93XX_SYSCON_REG(0x0c)
 #define EP93XX_SYSCON_CLOCK_SET1	EP93XX_SYSCON_REG(0x20)
 #define EP93XX_SYSCON_CLOCK_SET2	EP93XX_SYSCON_REG(0x24)
-#define EP93XX_SYSCON_DEVICE_CONFIG	EP93XX_SYSCON_REG(0x80)
-#define EP93XX_SYSCON_DEVICE_CONFIG_U3EN		(1<<24)
-#define EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE	(1<<23)
-#define EP93XX_SYSCON_DEVICE_CONFIG_U2EN		(1<<20)
-#define EP93XX_SYSCON_DEVICE_CONFIG_U1EN		(1<<18)
+#define EP93XX_SYSCON_DEVCFG		EP93XX_SYSCON_REG(0x80)
+#define EP93XX_SYSCON_DEVCFG_SWRST	(1<<31)
+#define EP93XX_SYSCON_DEVCFG_D1ONG	(1<<30)
+#define EP93XX_SYSCON_DEVCFG_D0ONG	(1<<29)
+#define EP93XX_SYSCON_DEVCFG_IONU2	(1<<28)
+#define EP93XX_SYSCON_DEVCFG_GONK	(1<<27)
+#define EP93XX_SYSCON_DEVCFG_TONG	(1<<26)
+#define EP93XX_SYSCON_DEVCFG_MONG	(1<<25)
+#define EP93XX_SYSCON_DEVCFG_U3EN	(1<<24)
+#define EP93XX_SYSCON_DEVCFG_CPENA	(1<<23)
+#define EP93XX_SYSCON_DEVCFG_A2ONG	(1<<22)
+#define EP93XX_SYSCON_DEVCFG_A1ONG	(1<<21)
+#define EP93XX_SYSCON_DEVCFG_U2EN	(1<<20)
+#define EP93XX_SYSCON_DEVCFG_EXVC	(1<<19)
+#define EP93XX_SYSCON_DEVCFG_U1EN	(1<<18)
+#define EP93XX_SYSCON_DEVCFG_TIN	(1<<17)
+#define EP93XX_SYSCON_DEVCFG_HC3IN	(1<<15)
+#define EP93XX_SYSCON_DEVCFG_HC3EN	(1<<14)
+#define EP93XX_SYSCON_DEVCFG_HC1IN	(1<<13)
+#define EP93XX_SYSCON_DEVCFG_HC1EN	(1<<12)
+#define EP93XX_SYSCON_DEVCFG_HONIDE	(1<<11)
+#define EP93XX_SYSCON_DEVCFG_GONIDE	(1<<10)
+#define EP93XX_SYSCON_DEVCFG_PONG	(1<<9)
+#define EP93XX_SYSCON_DEVCFG_EONIDE	(1<<8)
+#define EP93XX_SYSCON_DEVCFG_I2SONSSP	(1<<7)
+#define EP93XX_SYSCON_DEVCFG_I2SONAC97	(1<<6)
+#define EP93XX_SYSCON_DEVCFG_RASONP3	(1<<4)
+#define EP93XX_SYSCON_DEVCFG_RAS	(1<<3)
+#define EP93XX_SYSCON_DEVCFG_ADCPD	(1<<2)
+#define EP93XX_SYSCON_DEVCFG_KEYS	(1<<1)
+#define EP93XX_SYSCON_DEVCFG_SHENA	(1<<0)
 #define EP93XX_SYSCON_SWLOCK		EP93XX_SYSCON_REG(0xc0)
 
 #define EP93XX_WATCHDOG_BASE		EP93XX_APB_IOMEM(0x00140000)
diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h
index 05f0f4f2f3c..fb5e59a3ea0 100644
--- a/arch/arm/mach-ep93xx/include/mach/platform.h
+++ b/arch/arm/mach-ep93xx/include/mach/platform.h
@@ -15,8 +15,24 @@ struct ep93xx_eth_data
 void ep93xx_map_io(void);
 void ep93xx_init_irq(void);
 void ep93xx_init_time(unsigned long);
+
+/* EP93xx System Controller software locked register write */
+void ep93xx_syscon_swlocked_write(unsigned int val, unsigned int reg);
+void ep93xx_devcfg_set_clear(unsigned int set_bits, unsigned int clear_bits);
+
+static inline void ep93xx_devcfg_set_bits(unsigned int bits)
+{
+	ep93xx_devcfg_set_clear(bits, 0x00);
+}
+
+static inline void ep93xx_devcfg_clear_bits(unsigned int bits)
+{
+	ep93xx_devcfg_set_clear(0x00, bits);
+}
+
 void ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr);
 void ep93xx_register_i2c(struct i2c_board_info *devices, int num);
+
 void ep93xx_init_devices(void);
 extern struct sys_timer ep93xx_timer;
 
diff --git a/arch/arm/mach-ep93xx/include/mach/system.h b/arch/arm/mach-ep93xx/include/mach/system.h
index ed8f35e4f06..6d661fe9d66 100644
--- a/arch/arm/mach-ep93xx/include/mach/system.h
+++ b/arch/arm/mach-ep93xx/include/mach/system.h
@@ -11,15 +11,13 @@ static inline void arch_idle(void)
 
 static inline void arch_reset(char mode, const char *cmd)
 {
-	u32 devicecfg;
-
 	local_irq_disable();
 
-	devicecfg = __raw_readl(EP93XX_SYSCON_DEVICE_CONFIG);
-	__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
-	__raw_writel(devicecfg | 0x80000000, EP93XX_SYSCON_DEVICE_CONFIG);
-	__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
-	__raw_writel(devicecfg & ~0x80000000, EP93XX_SYSCON_DEVICE_CONFIG);
+	/*
+	 * Set then clear the SWRST bit to initiate a software reset
+	 */
+	ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_SWRST);
+	ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_SWRST);
 
 	while (1)
 		;
-- 
cgit v1.2.3


From 701fac823e24676ea42451c6597f96d81d9b6aba Mon Sep 17 00:00:00 2001
From: Hartley Sweeten <hartleys@visionengravers.com>
Date: Tue, 30 Jun 2009 23:06:43 +0100
Subject: [ARM] 5578/1: ep93xx: add ep93xx-keypad clock

Add clkdev support for the ep93xx_keypad driver.

A matrix keypad driver for the ep93xx just got merged via the
input subsystem group.  For this driver to work the keypad clock
needs to be added to the ep93xx clkdev support.  In order to
accomplish this the following changes are implemented:

  1) Move the EP93XX_EXT_*_RATE defines to mach/include/hardware.h.
  2) Add EP93XX_KEYTCHCLK_DIV{4/16} for the keypad driver.
  3) Add support for programmable clocks (set_rate() callback).
  4) Add clk_keypad for the keypad driver.
  5) tab indent the clk_lookup table for easier reading.
  6) Add the set_rate() callback to program the keypad clock.
     This callback is generalized since the ADC clock (touchscreen)
     can use the same callback.
  7) Use the ep93xx_syscon_swlocked_write() core function for updating
     the software locked register.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ep93xx/clock.c                 | 101 ++++++++++++++++++---------
 arch/arm/mach-ep93xx/include/mach/hardware.h |  14 ++++
 2 files changed, 82 insertions(+), 33 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
index c7642acfd02..207e2769941 100644
--- a/arch/arm/mach-ep93xx/clock.c
+++ b/arch/arm/mach-ep93xx/clock.c
@@ -22,18 +22,6 @@
 #include <mach/hardware.h>
 
 
-/*
- * The EP93xx has two external crystal oscillators.  To generate the
- * required high-frequency clocks, the processor uses two phase-locked-
- * loops (PLLs) to multiply the incoming external clock signal to much
- * higher frequencies that are then divided down by programmable dividers
- * to produce the needed clocks.  The PLLs operate independently of one
- * another.
- */
-#define EP93XX_EXT_CLK_RATE	14745600
-#define EP93XX_EXT_RTC_RATE	32768
-
-
 struct clk {
 	unsigned long	rate;
 	int		users;
@@ -42,11 +30,14 @@ struct clk {
 	u32		enable_mask;
 
 	unsigned long	(*get_rate)(struct clk *clk);
+	int		(*set_rate)(struct clk *clk, unsigned long rate);
 };
 
 
 static unsigned long get_uart_rate(struct clk *clk);
 
+static int set_keytchclk_rate(struct clk *clk, unsigned long rate);
+
 
 static struct clk clk_uart1 = {
 	.sw_locked	= 1,
@@ -75,6 +66,12 @@ static struct clk clk_usb_host = {
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
 	.enable_mask	= EP93XX_SYSCON_PWRCNT_USH_EN,
 };
+static struct clk clk_keypad = {
+	.sw_locked	= 1,
+	.enable_reg	= EP93XX_SYSCON_KEYTCHCLKDIV,
+	.enable_mask	= EP93XX_SYSCON_KEYTCHCLKDIV_KEN,
+	.set_rate	= set_keytchclk_rate,
+};
 
 /* DMA Clocks */
 static struct clk clk_m2p0 = {
@@ -130,27 +127,28 @@ static struct clk clk_m2m1 = {
 	{ .dev_id = dev, .con_id = con, .clk = ck }
 
 static struct clk_lookup clocks[] = {
-	INIT_CK("apb:uart1", NULL, &clk_uart1),
-	INIT_CK("apb:uart2", NULL, &clk_uart2),
-	INIT_CK("apb:uart3", NULL, &clk_uart3),
-	INIT_CK(NULL, "pll1", &clk_pll1),
-	INIT_CK(NULL, "fclk", &clk_f),
-	INIT_CK(NULL, "hclk", &clk_h),
-	INIT_CK(NULL, "pclk", &clk_p),
-	INIT_CK(NULL, "pll2", &clk_pll2),
-	INIT_CK("ep93xx-ohci", NULL, &clk_usb_host),
-	INIT_CK(NULL, "m2p0", &clk_m2p0),
-	INIT_CK(NULL, "m2p1", &clk_m2p1),
-	INIT_CK(NULL, "m2p2", &clk_m2p2),
-	INIT_CK(NULL, "m2p3", &clk_m2p3),
-	INIT_CK(NULL, "m2p4", &clk_m2p4),
-	INIT_CK(NULL, "m2p5", &clk_m2p5),
-	INIT_CK(NULL, "m2p6", &clk_m2p6),
-	INIT_CK(NULL, "m2p7", &clk_m2p7),
-	INIT_CK(NULL, "m2p8", &clk_m2p8),
-	INIT_CK(NULL, "m2p9", &clk_m2p9),
-	INIT_CK(NULL, "m2m0", &clk_m2m0),
-	INIT_CK(NULL, "m2m1", &clk_m2m1),
+	INIT_CK("apb:uart1",		NULL,		&clk_uart1),
+	INIT_CK("apb:uart2",		NULL,		&clk_uart2),
+	INIT_CK("apb:uart3",		NULL,		&clk_uart3),
+	INIT_CK(NULL,			"pll1",		&clk_pll1),
+	INIT_CK(NULL,			"fclk",		&clk_f),
+	INIT_CK(NULL,			"hclk",		&clk_h),
+	INIT_CK(NULL,			"pclk",		&clk_p),
+	INIT_CK(NULL,			"pll2",		&clk_pll2),
+	INIT_CK("ep93xx-ohci",		NULL,		&clk_usb_host),
+	INIT_CK("ep93xx-keypad",	NULL,		&clk_keypad),
+	INIT_CK(NULL,			"m2p0",		&clk_m2p0),
+	INIT_CK(NULL,			"m2p1",		&clk_m2p1),
+	INIT_CK(NULL,			"m2p2",		&clk_m2p2),
+	INIT_CK(NULL,			"m2p3",		&clk_m2p3),
+	INIT_CK(NULL,			"m2p4",		&clk_m2p4),
+	INIT_CK(NULL,			"m2p5",		&clk_m2p5),
+	INIT_CK(NULL,			"m2p6",		&clk_m2p6),
+	INIT_CK(NULL,			"m2p7",		&clk_m2p7),
+	INIT_CK(NULL,			"m2p8",		&clk_m2p8),
+	INIT_CK(NULL,			"m2p9",		&clk_m2p9),
+	INIT_CK(NULL,			"m2m0",		&clk_m2m0),
+	INIT_CK(NULL,			"m2m1",		&clk_m2m1),
 };
 
 
@@ -206,6 +204,43 @@ unsigned long clk_get_rate(struct clk *clk)
 }
 EXPORT_SYMBOL(clk_get_rate);
 
+static int set_keytchclk_rate(struct clk *clk, unsigned long rate)
+{
+	u32 val;
+	u32 div_bit;
+
+	val = __raw_readl(clk->enable_reg);
+
+	/*
+	 * The Key Matrix and ADC clocks are configured using the same
+	 * System Controller register.  The clock used will be either
+	 * 1/4 or 1/16 the external clock rate depending on the
+	 * EP93XX_SYSCON_KEYTCHCLKDIV_KDIV/EP93XX_SYSCON_KEYTCHCLKDIV_ADIV
+	 * bit being set or cleared.
+	 */
+	div_bit = clk->enable_mask >> 15;
+
+	if (rate == EP93XX_KEYTCHCLK_DIV4)
+		val |= div_bit;
+	else if (rate == EP93XX_KEYTCHCLK_DIV16)
+		val &= ~div_bit;
+	else
+		return -EINVAL;
+
+	ep93xx_syscon_swlocked_write(val, clk->enable_reg);
+	clk->rate = rate;
+	return 0;
+}
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	if (clk->set_rate)
+		return clk->set_rate(clk, rate);
+
+	return -EINVAL;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
 
 static char fclk_divisors[] = { 1, 2, 4, 8, 16, 1, 1, 1 };
 static char hclk_divisors[] = { 1, 2, 4, 5, 6, 8, 16, 32 };
diff --git a/arch/arm/mach-ep93xx/include/mach/hardware.h b/arch/arm/mach-ep93xx/include/mach/hardware.h
index 2866297310b..587c07bdec5 100644
--- a/arch/arm/mach-ep93xx/include/mach/hardware.h
+++ b/arch/arm/mach-ep93xx/include/mach/hardware.h
@@ -12,4 +12,18 @@
 
 #include "ts72xx.h"
 
+/*
+ * The EP93xx has two external crystal oscillators.  To generate the
+ * required high-frequency clocks, the processor uses two phase-locked-
+ * loops (PLLs) to multiply the incoming external clock signal to much
+ * higher frequencies that are then divided down by programmable dividers
+ * to produce the needed clocks.  The PLLs operate independently of one
+ * another.
+ */
+#define EP93XX_EXT_CLK_RATE	14745600
+#define EP93XX_EXT_RTC_RATE	32768
+
+#define EP93XX_KEYTCHCLK_DIV4	(EP93XX_EXT_CLK_RATE / 4)
+#define EP93XX_KEYTCHCLK_DIV16	(EP93XX_EXT_CLK_RATE / 16)
+
 #endif
-- 
cgit v1.2.3


From 583ddafe1787528d08b0026bb3273490a499b730 Mon Sep 17 00:00:00 2001
From: Hartley Sweeten <hartleys@visionengravers.com>
Date: Mon, 6 Jul 2009 17:39:50 +0100
Subject: [ARM] 5592/1: ep93xx: cleanup platform header includes

arch/arm/mach-ep93xx/include/mach/hardware.h
  1. Properly name the include files so that they are loaded
     from the <mach/*> directory and not the local directory.
  2. Remove including the ts72xx.h header.  This header is not
     generic to the ep93xx platform.  It should only be included
     by the ts72xx specific files that require it.  The only
     two users in the tree are arch/arm/mach-ep93xx/ts72xx.c
     and drivers/mtd/nand/ts7250.c.

arch/arm/mach-ep93xx/include/mach/ts72xx.h
  1. <linux/io.h> should already be included by any user of this
     header.  Doing the include here hides it from being needed
     by the calling source file.

arch/arm/mach-ep93xx/core.c
  1. Remove unnecessary headers.  They were probably included
     originally due to cut-and-paste from other files.
  2. <linux/io.h> should be included not <mach/gpio.h>

arch/arm/mach-ep93xx/adsphere.c
arch/arm/mach-ep93xx/edb93xx.c
arch/arm/mach-ep93xx/gesbc9312.c
arch/arm/mach-ep93xx/micro9.c
arch/arm/mach-ep93xx/ts72xx.c
  1. Remove unnecessary headers.

arch/arm/mach-ep93xx/ts72xx.c
  1. Remove unnecessary headers.
  2. Add platform specific header <mach/ts72xx.h>.

drivers/mtd/nand/ts7250.c
  1. <linux/io.h> should be included not <asm/io.h>.
  2. Add platform specific header <mach/ts72xx.h>.

Cc: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ep93xx/adssphere.c             | 11 ++++-------
 arch/arm/mach-ep93xx/core.c                  | 23 +++--------------------
 arch/arm/mach-ep93xx/edb93xx.c               | 10 ++++------
 arch/arm/mach-ep93xx/gesbc9312.c             | 11 ++++-------
 arch/arm/mach-ep93xx/include/mach/hardware.h |  7 ++-----
 arch/arm/mach-ep93xx/include/mach/ts72xx.h   |  1 -
 arch/arm/mach-ep93xx/micro9.c                | 11 +++--------
 arch/arm/mach-ep93xx/ts72xx.c                | 15 +++++++--------
 8 files changed, 27 insertions(+), 62 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-ep93xx/adssphere.c b/arch/arm/mach-ep93xx/adssphere.c
index 3fbd9b0fbe2..caf6d5154ae 100644
--- a/arch/arm/mach-ep93xx/adssphere.c
+++ b/arch/arm/mach-ep93xx/adssphere.c
@@ -12,18 +12,15 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
+#include <linux/mtd/physmap.h>
+
 #include <mach/hardware.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
+
 static struct physmap_flash_data adssphere_flash_data = {
 	.width		= 4,
 };
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 9399d3af990..ce10f5b5dfb 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -16,40 +16,23 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/sched.h>
+#include <linux/platform_device.h>
 #include <linux/interrupt.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/bitops.h>
-#include <linux/serial_8250.h>
-#include <linux/serial_core.h>
-#include <linux/device.h>
-#include <linux/mm.h>
 #include <linux/dma-mapping.h>
-#include <linux/time.h>
 #include <linux/timex.h>
-#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
 #include <linux/termios.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/serial.h>
-#include <linux/io.h>
 #include <linux/i2c.h>
 #include <linux/i2c-gpio.h>
 
-#include <asm/types.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
 #include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/system.h>
-#include <asm/tlbflush.h>
-#include <asm/pgtable.h>
 
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 #include <asm/mach/irq.h>
-#include <mach/gpio.h>
 
 #include <asm/hardware/vic.h>
 
diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c
index e9e45b92457..73145ae5d3f 100644
--- a/arch/arm/mach-ep93xx/edb93xx.c
+++ b/arch/arm/mach-ep93xx/edb93xx.c
@@ -26,18 +26,16 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
-#include <linux/io.h>
 #include <linux/i2c.h>
+#include <linux/mtd/physmap.h>
+
 #include <mach/hardware.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
+
 static struct physmap_flash_data edb93xx_flash_data;
 
 static struct resource edb93xx_flash_resource = {
diff --git a/arch/arm/mach-ep93xx/gesbc9312.c b/arch/arm/mach-ep93xx/gesbc9312.c
index 3bad500b71b..3da7ca816d1 100644
--- a/arch/arm/mach-ep93xx/gesbc9312.c
+++ b/arch/arm/mach-ep93xx/gesbc9312.c
@@ -12,18 +12,15 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
+#include <linux/mtd/physmap.h>
+
 #include <mach/hardware.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
+
 static struct physmap_flash_data gesbc9312_flash_data = {
 	.width		= 4,
 };
diff --git a/arch/arm/mach-ep93xx/include/mach/hardware.h b/arch/arm/mach-ep93xx/include/mach/hardware.h
index 587c07bdec5..349fa7cb72d 100644
--- a/arch/arm/mach-ep93xx/include/mach/hardware.h
+++ b/arch/arm/mach-ep93xx/include/mach/hardware.h
@@ -4,14 +4,11 @@
 #ifndef __ASM_ARCH_HARDWARE_H
 #define __ASM_ARCH_HARDWARE_H
 
-#include "ep93xx-regs.h"
+#include <mach/ep93xx-regs.h>
+#include <mach/platform.h>
 
 #define pcibios_assign_all_busses()	0
 
-#include "platform.h"
-
-#include "ts72xx.h"
-
 /*
  * The EP93xx has two external crystal oscillators.  To generate the
  * required high-frequency clocks, the processor uses two phase-locked-
diff --git a/arch/arm/mach-ep93xx/include/mach/ts72xx.h b/arch/arm/mach-ep93xx/include/mach/ts72xx.h
index 34ddec081c4..2737666e800 100644
--- a/arch/arm/mach-ep93xx/include/mach/ts72xx.h
+++ b/arch/arm/mach-ep93xx/include/mach/ts72xx.h
@@ -70,7 +70,6 @@
 
 
 #ifndef __ASSEMBLY__
-#include <linux/io.h>
 
 static inline int board_is_ts7200(void)
 {
diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c
index 15d6815d78c..0a313e82fb7 100644
--- a/arch/arm/mach-ep93xx/micro9.c
+++ b/arch/arm/mach-ep93xx/micro9.c
@@ -9,21 +9,16 @@
  * published by the Free Software Foundation.
  */
 
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
 #include <linux/kernel.h>
-#include <linux/mm.h>
+#include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/sched.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
 #include <linux/mtd/physmap.h>
 
 #include <mach/hardware.h>
 
-#include <asm/mach/arch.h>
 #include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
 
 static struct ep93xx_eth_data micro9_eth_data = {
 	.phy_id		= 0x1f,
diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
index 7ee024d3482..5255dddd306 100644
--- a/arch/arm/mach-ep93xx/ts72xx.c
+++ b/arch/arm/mach-ep93xx/ts72xx.c
@@ -12,19 +12,18 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
-#include <linux/m48t86.h>
 #include <linux/io.h>
-#include <linux/i2c.h>
+#include <linux/m48t86.h>
+#include <linux/mtd/physmap.h>
+
 #include <mach/hardware.h>
+#include <mach/ts72xx.h>
+
 #include <asm/mach-types.h>
-#include <asm/mach/arch.h>
 #include <asm/mach/map.h>
+#include <asm/mach/arch.h>
+
 
 static struct map_desc ts72xx_io_desc[] __initdata = {
 	{
-- 
cgit v1.2.3


From c3e3baddbc0b6636b01cb2aa3e44505ad61be17b Mon Sep 17 00:00:00 2001
From: Hartley Sweeten <hartleys@visionengravers.com>
Date: Mon, 6 Jul 2009 17:40:53 +0100
Subject: [ARM] 5593/1: ep93xx: clock.c __iomem pointer

To ensure typesafe io, the enable_reg variable should be a
void __iomem pointer not u32.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ep93xx/clock.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
index 207e2769941..b6b53447b1b 100644
--- a/arch/arm/mach-ep93xx/clock.c
+++ b/arch/arm/mach-ep93xx/clock.c
@@ -26,7 +26,7 @@ struct clk {
 	unsigned long	rate;
 	int		users;
 	int		sw_locked;
-	u32		enable_reg;
+	void __iomem	*enable_reg;
 	u32		enable_mask;
 
 	unsigned long	(*get_rate)(struct clk *clk);
-- 
cgit v1.2.3


From 19c0a7286f3f0093bbbbcdce0af4c3205421b608 Mon Sep 17 00:00:00 2001
From: wanzongshun <mcuos.com@gmail.com>
Date: Sat, 4 Jul 2009 12:26:33 +0100
Subject: [ARM] 5591/1: Add group irq enable/disable for w90p910 platform.

Add group irq enable/disable for w90p910 platform.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-w90x900/irq.c | 154 +++++++++++++++++++++++++++++++++++++++++---
 1 file changed, 146 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-w90x900/irq.c b/arch/arm/mach-w90x900/irq.c
index 0b4fc194729..a296c9b81d2 100644
--- a/arch/arm/mach-w90x900/irq.c
+++ b/arch/arm/mach-w90x900/irq.c
@@ -10,8 +10,7 @@
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * the Free Software Foundation;version 2 of the License.
  *
  */
 
@@ -29,9 +28,114 @@
 #include <mach/hardware.h>
 #include <mach/regs-irq.h>
 
+struct group_irq {
+	unsigned long		gpen;
+	unsigned int		enabled;
+	void			(*enable)(struct group_irq *, int enable);
+};
+
+static DEFINE_SPINLOCK(groupirq_lock);
+
+#define DEFINE_GROUP(_name, _ctrlbit, _num)			\
+struct group_irq group_##_name = {				\
+		.enable		= w90x900_group_enable,		\
+		.gpen		= ((2 ^ _num) - 1) << _ctrlbit,	\
+	}
+
+static void w90x900_group_enable(struct group_irq *gpirq, int enable);
+
+static DEFINE_GROUP(nirq0, 0, 4);
+static DEFINE_GROUP(nirq1, 4, 4);
+static DEFINE_GROUP(usbh, 8, 2);
+static DEFINE_GROUP(ottimer, 16, 3);
+static DEFINE_GROUP(gdma, 20, 2);
+static DEFINE_GROUP(sc, 24, 2);
+static DEFINE_GROUP(i2c, 26, 2);
+static DEFINE_GROUP(ps2, 28, 2);
+
+static int group_irq_enable(struct group_irq *group_irq)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&groupirq_lock, flags);
+	if (group_irq->enabled++ == 0)
+		(group_irq->enable)(group_irq, 1);
+	spin_unlock_irqrestore(&groupirq_lock, flags);
+
+	return 0;
+}
+
+static void group_irq_disable(struct group_irq *group_irq)
+{
+	unsigned long flags;
+
+	WARN_ON(group_irq->enabled == 0);
+
+	spin_lock_irqsave(&groupirq_lock, flags);
+	if (--group_irq->enabled == 0)
+		(group_irq->enable)(group_irq, 0);
+	spin_unlock_irqrestore(&groupirq_lock, flags);
+}
+
+static void w90x900_group_enable(struct group_irq *gpirq, int enable)
+{
+	unsigned int groupen = gpirq->gpen;
+	unsigned long regval;
+
+	regval = __raw_readl(REG_AIC_GEN);
+
+	if (enable)
+		regval |= groupen;
+	else
+		regval &= ~groupen;
+
+	__raw_writel(regval, REG_AIC_GEN);
+}
+
 static void w90x900_irq_mask(unsigned int irq)
 {
+	struct group_irq *group_irq;
+
+	group_irq = NULL;
+
 	__raw_writel(1 << irq, REG_AIC_MDCR);
+
+	switch (irq) {
+	case IRQ_GROUP0:
+		group_irq = &group_nirq0;
+		break;
+
+	case IRQ_GROUP1:
+		group_irq = &group_nirq1;
+		break;
+
+	case IRQ_USBH:
+		group_irq = &group_usbh;
+		break;
+
+	case IRQ_T_INT_GROUP:
+		group_irq = &group_ottimer;
+		break;
+
+	case IRQ_GDMAGROUP:
+		group_irq = &group_gdma;
+		break;
+
+	case IRQ_SCGROUP:
+		group_irq = &group_sc;
+		break;
+
+	case IRQ_I2CGROUP:
+		group_irq = &group_i2c;
+		break;
+
+	case IRQ_P2SGROUP:
+		group_irq = &group_ps2;
+		break;
+	}
+
+	if (group_irq)
+		group_irq_disable(group_irq);
 }
 
 /*
@@ -46,14 +150,48 @@ static void w90x900_irq_ack(unsigned int irq)
 
 static void w90x900_irq_unmask(unsigned int irq)
 {
-	unsigned long mask;
+	struct group_irq *group_irq;
+
+	group_irq = NULL;
 
-	if (irq == IRQ_T_INT_GROUP) {
-		mask = __raw_readl(REG_AIC_GEN);
-		__raw_writel(TIME_GROUP_IRQ | mask, REG_AIC_GEN);
-		__raw_writel(1 << IRQ_T_INT_GROUP, REG_AIC_MECR);
-	}
 	__raw_writel(1 << irq, REG_AIC_MECR);
+
+	switch (irq) {
+	case IRQ_GROUP0:
+		group_irq = &group_nirq0;
+		break;
+
+	case IRQ_GROUP1:
+		group_irq = &group_nirq1;
+		break;
+
+	case IRQ_USBH:
+		group_irq = &group_usbh;
+		break;
+
+	case IRQ_T_INT_GROUP:
+		group_irq = &group_ottimer;
+		break;
+
+	case IRQ_GDMAGROUP:
+		group_irq = &group_gdma;
+		break;
+
+	case IRQ_SCGROUP:
+		group_irq = &group_sc;
+		break;
+
+	case IRQ_I2CGROUP:
+		group_irq = &group_i2c;
+		break;
+
+	case IRQ_P2SGROUP:
+		group_irq = &group_ps2;
+		break;
+	}
+
+	if (group_irq)
+		group_irq_enable(group_irq);
 }
 
 static struct irq_chip w90x900_irq_chip = {
-- 
cgit v1.2.3


From d7dbf6ea40a2859adaca2dfdbbea83f3d6c73c2f Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@sirena.org.uk>
Date: Wed, 8 Jul 2009 21:12:20 +0100
Subject: [ARM] 5596/1: at91sam9g20-ek: Register WM8731 in board file

The WM8731 driver has been updated to allow registration via normal
device model methods rather than from within the ASoC driver probe
so update the AT91SAM9G20-EK to make use of this.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/board-sam9g20ek.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index cc270beadd5..4c259870088 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -221,6 +221,7 @@ static struct gpio_led ek_leds[] = {
 static struct i2c_board_info __initdata ek_i2c_devices[] = {
 	{
 		I2C_BOARD_INFO("24c512", 0x50),
+		I2C_BOARD_INFO("wm8731", 0x1b),
 	},
 };
 
-- 
cgit v1.2.3


From 13892cf95d2edf0d3c4285cc2d0113efa73be723 Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Thu, 9 Jul 2009 20:56:14 +0100
Subject: [ARM] Update mach-types

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/tools/mach-types | 37 +++++++++++++++++++++++++++++++++++--
 1 file changed, 35 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index 33026eff2aa..30af4329469 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -12,7 +12,7 @@
 #
 #   http://www.arm.linux.org.uk/developer/machines/?action=new
 #
-# Last update: Sat Jun 20 22:28:39 2009
+# Last update: Thu Jul 9 20:56:13 2009
 #
 # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
 #
@@ -1769,7 +1769,7 @@ mx31cicada		MACH_MX31CICADA		MX31CICADA		1777
 mi424wr			MACH_MI424WR		MI424WR			1778
 axs_ultrax		MACH_AXS_ULTRAX		AXS_ULTRAX		1779
 at572d940deb		MACH_AT572D940DEB	AT572D940DEB		1780
-davinci_da8xx_evm	MACH_DAVINCI_DA8XX_EVM	DAVINCI_DA8XX_EVM	1781
+davinci_da830_evm	MACH_DAVINCI_DA830_EVM	DAVINCI_DA830_EVM	1781
 ep9302			MACH_EP9302		EP9302			1782
 at572d940hfek		MACH_AT572D940HFEB	AT572D940HFEB		1783
 cybook3			MACH_CYBOOK3		CYBOOK3			1784
@@ -2280,3 +2280,36 @@ htcrhodium		MACH_HTCRHODIUM		HTCRHODIUM		2292
 htctopaz		MACH_HTCTOPAZ		HTCTOPAZ		2293
 matrix504		MACH_MATRIX504		MATRIX504		2294
 mrfsa			MACH_MRFSA		MRFSA			2295
+sc_p270			MACH_SC_P270		SC_P270			2296
+atlas5_evb		MACH_ATLAS5_EVB		ATLAS5_EVB		2297
+pelco_lobox		MACH_PELCO_LOBOX	PELCO_LOBOX		2298
+dilax_pcu200		MACH_DILAX_PCU200	DILAX_PCU200		2299
+leonardo		MACH_LEONARDO		LEONARDO		2300
+zoran_approach7		MACH_ZORAN_APPROACH7	ZORAN_APPROACH7		2301
+dp6xx			MACH_DP6XX		DP6XX			2302
+bcm2153_vesper		MACH_BCM2153_VESPER	BCM2153_VESPER		2303
+mahimahi		MACH_MAHIMAHI		MAHIMAHI		2304
+clickc			MACH_CLICKC		CLICKC			2305
+zb_gateway		MACH_ZB_GATEWAY		ZB_GATEWAY		2306
+tazcard			MACH_TAZCARD		TAZCARD			2307
+tazdev			MACH_TAZDEV		TAZDEV			2308
+annax_cb_arm		MACH_ANNAX_CB_ARM	ANNAX_CB_ARM		2309
+annax_dm3		MACH_ANNAX_DM3		ANNAX_DM3		2310
+cerebric		MACH_CEREBRIC		CEREBRIC		2311
+orca			MACH_ORCA		ORCA			2312
+pc9260			MACH_PC9260		PC9260			2313
+ems285a			MACH_EMS285A		EMS285A			2314
+gec2410			MACH_GEC2410		GEC2410			2315
+gec2440			MACH_GEC2440		GEC2440			2316
+mw903			MACH_ARCH_MW903		ARCH_MW903		2317
+mw2440			MACH_MW2440		MW2440			2318
+ecac2378		MACH_ECAC2378		ECAC2378		2319
+tazkiosk		MACH_TAZKIOSK		TAZKIOSK		2320
+whiterabbit_mch		MACH_WHITERABBIT_MCH	WHITERABBIT_MCH		2321
+sbox9263		MACH_SBOX9263		SBOX9263		2322
+oreo			MACH_OREO		OREO			2323
+smdk6442		MACH_SMDK6442		SMDK6442		2324
+openrd_base		MACH_OPENRD_BASE	OPENRD_BASE		2325
+incredible		MACH_INCREDIBLE		INCREDIBLE		2326
+incrediblec		MACH_INCREDIBLEC	INCREDIBLEC		2327
+heroct			MACH_HEROCT		HEROCT			2328
-- 
cgit v1.2.3


From 9ff80942992cd5abd0779c815f310f65b7b83860 Mon Sep 17 00:00:00 2001
From: Cyrill Gorcunov <gorcunov@openvz.org>
Date: Wed, 8 Jul 2009 22:03:53 +0400
Subject: x86: Clean up idt_descr and idt_tableby using NR_VECTORS instead of
 hardcoded number

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <20090708180353.GH5301@lenovo>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/common.c | 2 +-
 arch/x86/kernel/traps.c      | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index f1961c07af9..d6f27c92854 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -982,7 +982,7 @@ static __init int setup_disablecpuid(char *arg)
 __setup("clearcpuid=", setup_disablecpuid);
 
 #ifdef CONFIG_X86_64
-struct desc_ptr idt_descr = { 256 * 16 - 1, (unsigned long) idt_table };
+struct desc_ptr idt_descr = { NR_VECTORS * 16 - 1, (unsigned long) idt_table };
 
 DEFINE_PER_CPU_FIRST(union irq_stack_union,
 		     irq_stack_union) __aligned(PAGE_SIZE);
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index 5204332f475..7e4b1f5dec8 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -76,7 +76,7 @@ char ignore_fpu_irq;
  * F0 0F bug workaround.. We have a special link segment
  * for this.
  */
-gate_desc idt_table[256]
+gate_desc idt_table[NR_VECTORS]
 	__attribute__((__section__(".data.idt"))) = { { { { 0, 0 } } }, };
 #endif
 
-- 
cgit v1.2.3


From a1b4f1a5b7f57be2593a9f1fca465a529c95fc07 Mon Sep 17 00:00:00 2001
From: Cyrill Gorcunov <gorcunov@openvz.org>
Date: Sun, 5 Jul 2009 20:01:54 +0400
Subject: x86, ipi: Clean up safe_smp_processor_id() by using the
 cpu_has_apic() macro helper

We already use a lot of cpu_has_ helpers.
Lets do here the same for consistency.

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <20090705160154.GB4791@lenovo>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/apic/ipi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/apic/ipi.c b/arch/x86/kernel/apic/ipi.c
index dbf5445727a..e6b4f517fcf 100644
--- a/arch/x86/kernel/apic/ipi.c
+++ b/arch/x86/kernel/apic/ipi.c
@@ -150,7 +150,7 @@ int safe_smp_processor_id(void)
 {
 	int apicid, cpuid;
 
-	if (!boot_cpu_has(X86_FEATURE_APIC))
+	if (!cpu_has_apic)
 		return 0;
 
 	apicid = hard_smp_processor_id();
-- 
cgit v1.2.3


From e90476d3bab4322070c0afb3e3b55671de8664ea Mon Sep 17 00:00:00 2001
From: Huang Weiyi <weiyi.huang@gmail.com>
Date: Sat, 11 Jul 2009 09:32:46 +0800
Subject: x86: Remove duplicated #include

Remove duplicated #include in:

  arch/x86/kernel/dumpstack.c

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/dumpstack.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/dumpstack.c b/arch/x86/kernel/dumpstack.c
index c8405718a4c..2d8a371d433 100644
--- a/arch/x86/kernel/dumpstack.c
+++ b/arch/x86/kernel/dumpstack.c
@@ -15,7 +15,6 @@
 #include <linux/bug.h>
 #include <linux/nmi.h>
 #include <linux/sysfs.h>
-#include <linux/ftrace.h>
 
 #include <asm/stacktrace.h>
 
-- 
cgit v1.2.3


From 8bdbd962ecfcbdd96f9dbb02d780b4553afd2543 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@linux.intel.com>
Date: Sat, 4 Jul 2009 00:35:45 +0100
Subject: x86/cpu: Clean up various files a bit

No code changes except printk levels (although some of the K6
mtrr code might be clearer if there were a few as would
splitting out some of the intel cache code).

Signed-off-by: Alan Cox <alan@linux.intel.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/amd.c              |  37 ++++++-----
 arch/x86/kernel/cpu/bugs.c             |  10 +--
 arch/x86/kernel/cpu/bugs_64.c          |   2 +-
 arch/x86/kernel/cpu/common.c           |   8 +--
 arch/x86/kernel/cpu/cyrix.c            |  19 ++++--
 arch/x86/kernel/cpu/hypervisor.c       |   5 +-
 arch/x86/kernel/cpu/intel.c            |  11 ++--
 arch/x86/kernel/cpu/intel_cacheinfo.c  | 116 +++++++++++++++++----------------
 arch/x86/kernel/cpu/perfctr-watchdog.c |  45 ++++++-------
 arch/x86/kernel/cpu/proc.c             |   2 +-
 arch/x86/kernel/cpu/vmware.c           |  18 ++---
 11 files changed, 144 insertions(+), 129 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index 28e5f595604..c6eb02e6987 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -2,7 +2,7 @@
 #include <linux/bitops.h>
 #include <linux/mm.h>
 
-#include <asm/io.h>
+#include <linux/io.h>
 #include <asm/processor.h>
 #include <asm/apic.h>
 #include <asm/cpu.h>
@@ -45,8 +45,8 @@ static void __cpuinit init_amd_k5(struct cpuinfo_x86 *c)
 #define CBAR_ENB	(0x80000000)
 #define CBAR_KEY	(0X000000CB)
 	if (c->x86_model == 9 || c->x86_model == 10) {
-		if (inl (CBAR) & CBAR_ENB)
-			outl (0 | CBAR_KEY, CBAR);
+		if (inl(CBAR) & CBAR_ENB)
+			outl(0 | CBAR_KEY, CBAR);
 	}
 }
 
@@ -87,9 +87,10 @@ static void __cpuinit init_amd_k6(struct cpuinfo_x86 *c)
 		d = d2-d;
 
 		if (d > 20*K6_BUG_LOOP)
-			printk("system stability may be impaired when more than 32 MB are used.\n");
+			printk(KERN_CONT
+				"system stability may be impaired when more than 32 MB are used.\n");
 		else
-			printk("probably OK (after B9730xxxx).\n");
+			printk(KERN_CONT "probably OK (after B9730xxxx).\n");
 		printk(KERN_INFO "Please see http://membres.lycos.fr/poulot/k6bug.html\n");
 	}
 
@@ -219,8 +220,9 @@ static void __cpuinit init_amd_k7(struct cpuinfo_x86 *c)
 	if ((c->x86_model == 8 && c->x86_mask >= 1) || (c->x86_model > 8)) {
 		rdmsr(MSR_K7_CLK_CTL, l, h);
 		if ((l & 0xfff00000) != 0x20000000) {
-			printk ("CPU: CLK_CTL MSR was %x. Reprogramming to %x\n", l,
-				((l & 0x000fffff)|0x20000000));
+			printk(KERN_INFO
+			    "CPU: CLK_CTL MSR was %x. Reprogramming to %x\n",
+					l, ((l & 0x000fffff)|0x20000000));
 			wrmsr(MSR_K7_CLK_CTL, (l & 0x000fffff)|0x20000000, h);
 		}
 	}
@@ -398,7 +400,7 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c)
 		u32 level;
 
 		level = cpuid_eax(1);
-		if((level >= 0x0f48 && level < 0x0f50) || level >= 0x0f58)
+		if ((level >= 0x0f48 && level < 0x0f50) || level >= 0x0f58)
 			set_cpu_cap(c, X86_FEATURE_REP_GOOD);
 	}
 	if (c->x86 == 0x10 || c->x86 == 0x11)
@@ -487,27 +489,30 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c)
 		 * benefit in doing so.
 		 */
 		if (!rdmsrl_safe(MSR_K8_TSEG_ADDR, &tseg)) {
-		    printk(KERN_DEBUG "tseg: %010llx\n", tseg);
-		    if ((tseg>>PMD_SHIFT) <
+			printk(KERN_DEBUG "tseg: %010llx\n", tseg);
+			if ((tseg>>PMD_SHIFT) <
 				(max_low_pfn_mapped>>(PMD_SHIFT-PAGE_SHIFT)) ||
-			((tseg>>PMD_SHIFT) <
+				((tseg>>PMD_SHIFT) <
 				(max_pfn_mapped>>(PMD_SHIFT-PAGE_SHIFT)) &&
-			 (tseg>>PMD_SHIFT) >= (1ULL<<(32 - PMD_SHIFT))))
-			set_memory_4k((unsigned long)__va(tseg), 1);
+				(tseg>>PMD_SHIFT) >= (1ULL<<(32 - PMD_SHIFT))))
+				set_memory_4k((unsigned long)__va(tseg), 1);
 		}
 	}
 #endif
 }
 
 #ifdef CONFIG_X86_32
-static unsigned int __cpuinit amd_size_cache(struct cpuinfo_x86 *c, unsigned int size)
+static unsigned int __cpuinit amd_size_cache(struct cpuinfo_x86 *c,
+							unsigned int size)
 {
 	/* AMD errata T13 (order #21922) */
 	if ((c->x86 == 6)) {
-		if (c->x86_model == 3 && c->x86_mask == 0)	/* Duron Rev A0 */
+		/* Duron Rev A0 */
+		if (c->x86_model == 3 && c->x86_mask == 0)
 			size = 64;
+		/* Tbird rev A1/A2 */
 		if (c->x86_model == 4 &&
-		    (c->x86_mask == 0 || c->x86_mask == 1))	/* Tbird rev A1/A2 */
+			(c->x86_mask == 0 || c->x86_mask == 1))
 			size = 256;
 	}
 	return size;
diff --git a/arch/x86/kernel/cpu/bugs.c b/arch/x86/kernel/cpu/bugs.c
index c8e315f1aa8..01a26521239 100644
--- a/arch/x86/kernel/cpu/bugs.c
+++ b/arch/x86/kernel/cpu/bugs.c
@@ -81,7 +81,7 @@ static void __init check_fpu(void)
 
 	boot_cpu_data.fdiv_bug = fdiv_bug;
 	if (boot_cpu_data.fdiv_bug)
-		printk("Hmm, FPU with FDIV bug.\n");
+		printk(KERN_WARNING "Hmm, FPU with FDIV bug.\n");
 }
 
 static void __init check_hlt(void)
@@ -98,7 +98,7 @@ static void __init check_hlt(void)
 	halt();
 	halt();
 	halt();
-	printk("OK.\n");
+	printk(KERN_CONT "OK.\n");
 }
 
 /*
@@ -122,9 +122,9 @@ static void __init check_popad(void)
 	 * CPU hard. Too bad.
 	 */
 	if (res != 12345678)
-		printk("Buggy.\n");
+		printk(KERN_CONT "Buggy.\n");
 	else
-		printk("OK.\n");
+		printk(KERN_CONT "OK.\n");
 #endif
 }
 
@@ -156,7 +156,7 @@ void __init check_bugs(void)
 {
 	identify_boot_cpu();
 #ifndef CONFIG_SMP
-	printk("CPU: ");
+	printk(KERN_INFO "CPU: ");
 	print_cpu_info(&boot_cpu_data);
 #endif
 	check_config();
diff --git a/arch/x86/kernel/cpu/bugs_64.c b/arch/x86/kernel/cpu/bugs_64.c
index 9a3ed0649d4..04f0fe5af83 100644
--- a/arch/x86/kernel/cpu/bugs_64.c
+++ b/arch/x86/kernel/cpu/bugs_64.c
@@ -15,7 +15,7 @@ void __init check_bugs(void)
 {
 	identify_boot_cpu();
 #if !defined(CONFIG_SMP)
-	printk("CPU: ");
+	printk(KERN_INFO "CPU: ");
 	print_cpu_info(&boot_cpu_data);
 #endif
 	alternative_instructions();
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index d6f27c92854..c96ea44928b 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -18,8 +18,8 @@
 #include <asm/hypervisor.h>
 #include <asm/processor.h>
 #include <asm/sections.h>
-#include <asm/topology.h>
-#include <asm/cpumask.h>
+#include <linux/topology.h>
+#include <linux/cpumask.h>
 #include <asm/pgtable.h>
 #include <asm/atomic.h>
 #include <asm/proto.h>
@@ -28,13 +28,13 @@
 #include <asm/desc.h>
 #include <asm/i387.h>
 #include <asm/mtrr.h>
-#include <asm/numa.h>
+#include <linux/numa.h>
 #include <asm/asm.h>
 #include <asm/cpu.h>
 #include <asm/mce.h>
 #include <asm/msr.h>
 #include <asm/pat.h>
-#include <asm/smp.h>
+#include <linux/smp.h>
 
 #ifdef CONFIG_X86_LOCAL_APIC
 #include <asm/uv/uv.h>
diff --git a/arch/x86/kernel/cpu/cyrix.c b/arch/x86/kernel/cpu/cyrix.c
index 593171e967e..19807b89f05 100644
--- a/arch/x86/kernel/cpu/cyrix.c
+++ b/arch/x86/kernel/cpu/cyrix.c
@@ -3,10 +3,10 @@
 #include <linux/delay.h>
 #include <linux/pci.h>
 #include <asm/dma.h>
-#include <asm/io.h>
+#include <linux/io.h>
 #include <asm/processor-cyrix.h>
 #include <asm/processor-flags.h>
-#include <asm/timer.h>
+#include <linux/timer.h>
 #include <asm/pci-direct.h>
 #include <asm/tsc.h>
 
@@ -282,7 +282,8 @@ static void __cpuinit init_cyrix(struct cpuinfo_x86 *c)
 		 *  The 5510/5520 companion chips have a funky PIT.
 		 */
 		if (vendor == PCI_VENDOR_ID_CYRIX &&
-	 (device == PCI_DEVICE_ID_CYRIX_5510 || device == PCI_DEVICE_ID_CYRIX_5520))
+			(device == PCI_DEVICE_ID_CYRIX_5510 ||
+					device == PCI_DEVICE_ID_CYRIX_5520))
 			mark_tsc_unstable("cyrix 5510/5520 detected");
 	}
 #endif
@@ -299,7 +300,8 @@ static void __cpuinit init_cyrix(struct cpuinfo_x86 *c)
 			 *  ?  : 0x7x
 			 * GX1 : 0x8x          GX1  datasheet 56
 			 */
-			if ((0x30 <= dir1 && dir1 <= 0x6f) || (0x80 <= dir1 && dir1 <= 0x8f))
+			if ((0x30 <= dir1 && dir1 <= 0x6f) ||
+					(0x80 <= dir1 && dir1 <= 0x8f))
 				geode_configure();
 			return;
 		} else { /* MediaGX */
@@ -427,9 +429,12 @@ static void __cpuinit cyrix_identify(struct cpuinfo_x86 *c)
 			printk(KERN_INFO "Enabling CPUID on Cyrix processor.\n");
 			local_irq_save(flags);
 			ccr3 = getCx86(CX86_CCR3);
-			setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10);       /* enable MAPEN  */
-			setCx86_old(CX86_CCR4, getCx86_old(CX86_CCR4) | 0x80);  /* enable cpuid  */
-			setCx86(CX86_CCR3, ccr3);                       /* disable MAPEN */
+			/* enable MAPEN  */
+			setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10);
+			/* enable cpuid  */
+			setCx86_old(CX86_CCR4, getCx86_old(CX86_CCR4) | 0x80);
+			/* disable MAPEN */
+			setCx86(CX86_CCR3, ccr3);
 			local_irq_restore(flags);
 		}
 	}
diff --git a/arch/x86/kernel/cpu/hypervisor.c b/arch/x86/kernel/cpu/hypervisor.c
index fb5b86af0b0..93ba8eeb100 100644
--- a/arch/x86/kernel/cpu/hypervisor.c
+++ b/arch/x86/kernel/cpu/hypervisor.c
@@ -28,11 +28,10 @@
 static inline void __cpuinit
 detect_hypervisor_vendor(struct cpuinfo_x86 *c)
 {
-	if (vmware_platform()) {
+	if (vmware_platform())
 		c->x86_hyper_vendor = X86_HYPER_VENDOR_VMWARE;
-	} else {
+	else
 		c->x86_hyper_vendor = X86_HYPER_VENDOR_NONE;
-	}
 }
 
 unsigned long get_hypervisor_tsc_freq(void)
diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c
index 3260ab04499..80a722a071b 100644
--- a/arch/x86/kernel/cpu/intel.c
+++ b/arch/x86/kernel/cpu/intel.c
@@ -7,17 +7,17 @@
 #include <linux/sched.h>
 #include <linux/thread_info.h>
 #include <linux/module.h>
+#include <linux/uaccess.h>
 
 #include <asm/processor.h>
 #include <asm/pgtable.h>
 #include <asm/msr.h>
-#include <asm/uaccess.h>
 #include <asm/ds.h>
 #include <asm/bugs.h>
 #include <asm/cpu.h>
 
 #ifdef CONFIG_X86_64
-#include <asm/topology.h>
+#include <linux/topology.h>
 #include <asm/numa_64.h>
 #endif
 
@@ -174,7 +174,8 @@ static void __cpuinit intel_workarounds(struct cpuinfo_x86 *c)
 #ifdef CONFIG_X86_F00F_BUG
 	/*
 	 * All current models of Pentium and Pentium with MMX technology CPUs
-	 * have the F0 0F bug, which lets nonprivileged users lock up the system.
+	 * have the F0 0F bug, which lets nonprivileged users lock up the
+	 * system.
 	 * Note that the workaround only should be initialized once...
 	 */
 	c->f00f_bug = 0;
@@ -207,7 +208,7 @@ static void __cpuinit intel_workarounds(struct cpuinfo_x86 *c)
 			printk (KERN_INFO "CPU: C0 stepping P4 Xeon detected.\n");
 			printk (KERN_INFO "CPU: Disabling hardware prefetching (Errata 037)\n");
 			lo |= MSR_IA32_MISC_ENABLE_PREFETCH_DISABLE;
-			wrmsr (MSR_IA32_MISC_ENABLE, lo, hi);
+			wrmsr(MSR_IA32_MISC_ENABLE, lo, hi);
 		}
 	}
 
@@ -283,7 +284,7 @@ static int __cpuinit intel_num_cpu_cores(struct cpuinfo_x86 *c)
 	/* Intel has a non-standard dependency on %ecx for this CPUID level. */
 	cpuid_count(4, 0, &eax, &ebx, &ecx, &edx);
 	if (eax & 0x1f)
-		return ((eax >> 26) + 1);
+		return (eax >> 26) + 1;
 	else
 		return 1;
 }
diff --git a/arch/x86/kernel/cpu/intel_cacheinfo.c b/arch/x86/kernel/cpu/intel_cacheinfo.c
index 789efe217e1..306bf0dca06 100644
--- a/arch/x86/kernel/cpu/intel_cacheinfo.c
+++ b/arch/x86/kernel/cpu/intel_cacheinfo.c
@@ -3,7 +3,7 @@
  *
  *	Changes:
  *	Venkatesh Pallipadi	: Adding cache identification through cpuid(4)
- *		Ashok Raj <ashok.raj@intel.com>: Work with CPU hotplug infrastructure.
+ *	Ashok Raj <ashok.raj@intel.com>: Work with CPU hotplug infrastructure.
  *	Andi Kleen / Andreas Herrmann	: CPUID4 emulation on AMD.
  */
 
@@ -16,7 +16,7 @@
 #include <linux/pci.h>
 
 #include <asm/processor.h>
-#include <asm/smp.h>
+#include <linux/smp.h>
 #include <asm/k8.h>
 
 #define LVL_1_INST	1
@@ -25,14 +25,15 @@
 #define LVL_3		4
 #define LVL_TRACE	5
 
-struct _cache_table
-{
+struct _cache_table {
 	unsigned char descriptor;
 	char cache_type;
 	short size;
 };
 
-/* all the cache descriptor types we care about (no TLB or trace cache entries) */
+/* All the cache descriptor types we care about (no TLB or
+   trace cache entries) */
+
 static const struct _cache_table __cpuinitconst cache_table[] =
 {
 	{ 0x06, LVL_1_INST, 8 },	/* 4-way set assoc, 32 byte line size */
@@ -105,8 +106,7 @@ static const struct _cache_table __cpuinitconst cache_table[] =
 };
 
 
-enum _cache_type
-{
+enum _cache_type {
 	CACHE_TYPE_NULL	= 0,
 	CACHE_TYPE_DATA = 1,
 	CACHE_TYPE_INST = 2,
@@ -170,31 +170,31 @@ unsigned short			num_cache_leaves;
    Maybe later */
 union l1_cache {
 	struct {
-		unsigned line_size : 8;
-		unsigned lines_per_tag : 8;
-		unsigned assoc : 8;
-		unsigned size_in_kb : 8;
+		unsigned line_size:8;
+		unsigned lines_per_tag:8;
+		unsigned assoc:8;
+		unsigned size_in_kb:8;
 	};
 	unsigned val;
 };
 
 union l2_cache {
 	struct {
-		unsigned line_size : 8;
-		unsigned lines_per_tag : 4;
-		unsigned assoc : 4;
-		unsigned size_in_kb : 16;
+		unsigned line_size:8;
+		unsigned lines_per_tag:4;
+		unsigned assoc:4;
+		unsigned size_in_kb:16;
 	};
 	unsigned val;
 };
 
 union l3_cache {
 	struct {
-		unsigned line_size : 8;
-		unsigned lines_per_tag : 4;
-		unsigned assoc : 4;
-		unsigned res : 2;
-		unsigned size_encoded : 14;
+		unsigned line_size:8;
+		unsigned lines_per_tag:4;
+		unsigned assoc:4;
+		unsigned res:2;
+		unsigned size_encoded:14;
 	};
 	unsigned val;
 };
@@ -350,7 +350,8 @@ static int __cpuinit find_num_cache_leaves(void)
 
 unsigned int __cpuinit init_intel_cacheinfo(struct cpuinfo_x86 *c)
 {
-	unsigned int trace = 0, l1i = 0, l1d = 0, l2 = 0, l3 = 0; /* Cache sizes */
+	/* Cache sizes */
+	unsigned int trace = 0, l1i = 0, l1d = 0, l2 = 0, l3 = 0;
 	unsigned int new_l1d = 0, new_l1i = 0; /* Cache sizes from cpuid(4) */
 	unsigned int new_l2 = 0, new_l3 = 0, i; /* Cache sizes from cpuid(4) */
 	unsigned int l2_id = 0, l3_id = 0, num_threads_sharing, index_msb;
@@ -377,8 +378,8 @@ unsigned int __cpuinit init_intel_cacheinfo(struct cpuinfo_x86 *c)
 
 			retval = cpuid4_cache_lookup_regs(i, &this_leaf);
 			if (retval >= 0) {
-				switch(this_leaf.eax.split.level) {
-				    case 1:
+				switch (this_leaf.eax.split.level) {
+				case 1:
 					if (this_leaf.eax.split.type ==
 							CACHE_TYPE_DATA)
 						new_l1d = this_leaf.size/1024;
@@ -386,19 +387,20 @@ unsigned int __cpuinit init_intel_cacheinfo(struct cpuinfo_x86 *c)
 							CACHE_TYPE_INST)
 						new_l1i = this_leaf.size/1024;
 					break;
-				    case 2:
+				case 2:
 					new_l2 = this_leaf.size/1024;
 					num_threads_sharing = 1 + this_leaf.eax.split.num_threads_sharing;
 					index_msb = get_count_order(num_threads_sharing);
 					l2_id = c->apicid >> index_msb;
 					break;
-				    case 3:
+				case 3:
 					new_l3 = this_leaf.size/1024;
 					num_threads_sharing = 1 + this_leaf.eax.split.num_threads_sharing;
-					index_msb = get_count_order(num_threads_sharing);
+					index_msb = get_count_order(
+							num_threads_sharing);
 					l3_id = c->apicid >> index_msb;
 					break;
-				    default:
+				default:
 					break;
 				}
 			}
@@ -421,22 +423,21 @@ unsigned int __cpuinit init_intel_cacheinfo(struct cpuinfo_x86 *c)
 		/* Number of times to iterate */
 		n = cpuid_eax(2) & 0xFF;
 
-		for ( i = 0 ; i < n ; i++ ) {
+		for (i = 0 ; i < n ; i++) {
 			cpuid(2, &regs[0], &regs[1], &regs[2], &regs[3]);
 
 			/* If bit 31 is set, this is an unknown format */
-			for ( j = 0 ; j < 3 ; j++ ) {
-				if (regs[j] & (1 << 31)) regs[j] = 0;
-			}
+			for (j = 0 ; j < 3 ; j++)
+				if (regs[j] & (1 << 31))
+					regs[j] = 0;
 
 			/* Byte 0 is level count, not a descriptor */
-			for ( j = 1 ; j < 16 ; j++ ) {
+			for (j = 1 ; j < 16 ; j++) {
 				unsigned char des = dp[j];
 				unsigned char k = 0;
 
 				/* look up this descriptor in the table */
-				while (cache_table[k].descriptor != 0)
-				{
+				while (cache_table[k].descriptor != 0) {
 					if (cache_table[k].descriptor == des) {
 						if (only_trace && cache_table[k].cache_type != LVL_TRACE)
 							break;
@@ -488,14 +489,14 @@ unsigned int __cpuinit init_intel_cacheinfo(struct cpuinfo_x86 *c)
 	}
 
 	if (trace)
-		printk (KERN_INFO "CPU: Trace cache: %dK uops", trace);
-	else if ( l1i )
-		printk (KERN_INFO "CPU: L1 I cache: %dK", l1i);
+		printk(KERN_INFO "CPU: Trace cache: %dK uops", trace);
+	else if (l1i)
+		printk(KERN_INFO "CPU: L1 I cache: %dK", l1i);
 
 	if (l1d)
-		printk(", L1 D cache: %dK\n", l1d);
+		printk(KERN_CONT ", L1 D cache: %dK\n", l1d);
 	else
-		printk("\n");
+		printk(KERN_CONT "\n");
 
 	if (l2)
 		printk(KERN_INFO "CPU: L2 cache: %dK\n", l2);
@@ -558,8 +559,13 @@ static void __cpuinit cache_remove_shared_cpu_map(unsigned int cpu, int index)
 	}
 }
 #else
-static void __cpuinit cache_shared_cpu_map_setup(unsigned int cpu, int index) {}
-static void __cpuinit cache_remove_shared_cpu_map(unsigned int cpu, int index) {}
+static void __cpuinit cache_shared_cpu_map_setup(unsigned int cpu, int index)
+{
+}
+
+static void __cpuinit cache_remove_shared_cpu_map(unsigned int cpu, int index)
+{
+}
 #endif
 
 static void __cpuinit free_cache_attributes(unsigned int cpu)
@@ -645,7 +651,7 @@ static DEFINE_PER_CPU(struct _index_kobject *, index_kobject);
 static ssize_t show_##file_name						\
 			(struct _cpuid4_info *this_leaf, char *buf)	\
 {									\
-	return sprintf (buf, "%lu\n", (unsigned long)this_leaf->object + val); \
+	return sprintf(buf, "%lu\n", (unsigned long)this_leaf->object + val); \
 }
 
 show_one_plus(level, eax.split.level, 0);
@@ -656,7 +662,7 @@ show_one_plus(number_of_sets, ecx.split.number_of_sets, 1);
 
 static ssize_t show_size(struct _cpuid4_info *this_leaf, char *buf)
 {
-	return sprintf (buf, "%luK\n", this_leaf->size / 1024);
+	return sprintf(buf, "%luK\n", this_leaf->size / 1024);
 }
 
 static ssize_t show_shared_cpu_map_func(struct _cpuid4_info *this_leaf,
@@ -669,7 +675,7 @@ static ssize_t show_shared_cpu_map_func(struct _cpuid4_info *this_leaf,
 		const struct cpumask *mask;
 
 		mask = to_cpumask(this_leaf->shared_cpu_map);
-		n = type?
+		n = type ?
 			cpulist_scnprintf(buf, len-2, mask) :
 			cpumask_scnprintf(buf, len-2, mask);
 		buf[n++] = '\n';
@@ -800,7 +806,7 @@ static struct _cache_attr cache_disable_0 = __ATTR(cache_disable_0, 0644,
 static struct _cache_attr cache_disable_1 = __ATTR(cache_disable_1, 0644,
 		show_cache_disable_1, store_cache_disable_1);
 
-static struct attribute * default_attrs[] = {
+static struct attribute *default_attrs[] = {
 	&type.attr,
 	&level.attr,
 	&coherency_line_size.attr,
@@ -815,7 +821,7 @@ static struct attribute * default_attrs[] = {
 	NULL
 };
 
-static ssize_t show(struct kobject * kobj, struct attribute * attr, char * buf)
+static ssize_t show(struct kobject *kobj, struct attribute *attr, char *buf)
 {
 	struct _cache_attr *fattr = to_attr(attr);
 	struct _index_kobject *this_leaf = to_object(kobj);
@@ -828,8 +834,8 @@ static ssize_t show(struct kobject * kobj, struct attribute * attr, char * buf)
 	return ret;
 }
 
-static ssize_t store(struct kobject * kobj, struct attribute * attr,
-		     const char * buf, size_t count)
+static ssize_t store(struct kobject *kobj, struct attribute *attr,
+		     const char *buf, size_t count)
 {
 	struct _cache_attr *fattr = to_attr(attr);
 	struct _index_kobject *this_leaf = to_object(kobj);
@@ -883,7 +889,7 @@ static int __cpuinit cpuid4_cache_sysfs_init(unsigned int cpu)
 		goto err_out;
 
 	per_cpu(index_kobject, cpu) = kzalloc(
-	    sizeof(struct _index_kobject ) * num_cache_leaves, GFP_KERNEL);
+	    sizeof(struct _index_kobject) * num_cache_leaves, GFP_KERNEL);
 	if (unlikely(per_cpu(index_kobject, cpu) == NULL))
 		goto err_out;
 
@@ -917,7 +923,7 @@ static int __cpuinit cache_add_dev(struct sys_device * sys_dev)
 	}
 
 	for (i = 0; i < num_cache_leaves; i++) {
-		this_object = INDEX_KOBJECT_PTR(cpu,i);
+		this_object = INDEX_KOBJECT_PTR(cpu, i);
 		this_object->cpu = cpu;
 		this_object->index = i;
 		retval = kobject_init_and_add(&(this_object->kobj),
@@ -925,9 +931,8 @@ static int __cpuinit cache_add_dev(struct sys_device * sys_dev)
 					      per_cpu(cache_kobject, cpu),
 					      "index%1lu", i);
 		if (unlikely(retval)) {
-			for (j = 0; j < i; j++) {
-				kobject_put(&(INDEX_KOBJECT_PTR(cpu,j)->kobj));
-			}
+			for (j = 0; j < i; j++)
+				kobject_put(&(INDEX_KOBJECT_PTR(cpu, j)->kobj));
 			kobject_put(per_cpu(cache_kobject, cpu));
 			cpuid4_cache_sysfs_exit(cpu);
 			return retval;
@@ -952,7 +957,7 @@ static void __cpuinit cache_remove_dev(struct sys_device * sys_dev)
 	cpumask_clear_cpu(cpu, to_cpumask(cache_dev_map));
 
 	for (i = 0; i < num_cache_leaves; i++)
-		kobject_put(&(INDEX_KOBJECT_PTR(cpu,i)->kobj));
+		kobject_put(&(INDEX_KOBJECT_PTR(cpu, i)->kobj));
 	kobject_put(per_cpu(cache_kobject, cpu));
 	cpuid4_cache_sysfs_exit(cpu);
 }
@@ -977,8 +982,7 @@ static int __cpuinit cacheinfo_cpu_callback(struct notifier_block *nfb,
 	return NOTIFY_OK;
 }
 
-static struct notifier_block __cpuinitdata cacheinfo_cpu_notifier =
-{
+static struct notifier_block __cpuinitdata cacheinfo_cpu_notifier = {
 	.notifier_call = cacheinfo_cpu_callback,
 };
 
diff --git a/arch/x86/kernel/cpu/perfctr-watchdog.c b/arch/x86/kernel/cpu/perfctr-watchdog.c
index 5c481f6205b..8100a29c854 100644
--- a/arch/x86/kernel/cpu/perfctr-watchdog.c
+++ b/arch/x86/kernel/cpu/perfctr-watchdog.c
@@ -68,16 +68,16 @@ static inline unsigned int nmi_perfctr_msr_to_bit(unsigned int msr)
 	/* returns the bit offset of the performance counter register */
 	switch (boot_cpu_data.x86_vendor) {
 	case X86_VENDOR_AMD:
-		return (msr - MSR_K7_PERFCTR0);
+		return msr - MSR_K7_PERFCTR0;
 	case X86_VENDOR_INTEL:
 		if (cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON))
-			return (msr - MSR_ARCH_PERFMON_PERFCTR0);
+			return msr - MSR_ARCH_PERFMON_PERFCTR0;
 
 		switch (boot_cpu_data.x86) {
 		case 6:
-			return (msr - MSR_P6_PERFCTR0);
+			return msr - MSR_P6_PERFCTR0;
 		case 15:
-			return (msr - MSR_P4_BPU_PERFCTR0);
+			return msr - MSR_P4_BPU_PERFCTR0;
 		}
 	}
 	return 0;
@@ -92,16 +92,16 @@ static inline unsigned int nmi_evntsel_msr_to_bit(unsigned int msr)
 	/* returns the bit offset of the event selection register */
 	switch (boot_cpu_data.x86_vendor) {
 	case X86_VENDOR_AMD:
-		return (msr - MSR_K7_EVNTSEL0);
+		return msr - MSR_K7_EVNTSEL0;
 	case X86_VENDOR_INTEL:
 		if (cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON))
-			return (msr - MSR_ARCH_PERFMON_EVENTSEL0);
+			return msr - MSR_ARCH_PERFMON_EVENTSEL0;
 
 		switch (boot_cpu_data.x86) {
 		case 6:
-			return (msr - MSR_P6_EVNTSEL0);
+			return msr - MSR_P6_EVNTSEL0;
 		case 15:
-			return (msr - MSR_P4_BSU_ESCR0);
+			return msr - MSR_P4_BSU_ESCR0;
 		}
 	}
 	return 0;
@@ -113,7 +113,7 @@ int avail_to_resrv_perfctr_nmi_bit(unsigned int counter)
 {
 	BUG_ON(counter > NMI_MAX_COUNTER_BITS);
 
-	return (!test_bit(counter, perfctr_nmi_owner));
+	return !test_bit(counter, perfctr_nmi_owner);
 }
 
 /* checks the an msr for availability */
@@ -124,7 +124,7 @@ int avail_to_resrv_perfctr_nmi(unsigned int msr)
 	counter = nmi_perfctr_msr_to_bit(msr);
 	BUG_ON(counter > NMI_MAX_COUNTER_BITS);
 
-	return (!test_bit(counter, perfctr_nmi_owner));
+	return !test_bit(counter, perfctr_nmi_owner);
 }
 EXPORT_SYMBOL(avail_to_resrv_perfctr_nmi_bit);
 
@@ -237,7 +237,7 @@ static unsigned int adjust_for_32bit_ctr(unsigned int hz)
 	 */
 	counter_val = (u64)cpu_khz * 1000;
 	do_div(counter_val, retval);
- 	if (counter_val > 0x7fffffffULL) {
+	if (counter_val > 0x7fffffffULL) {
 		u64 count = (u64)cpu_khz * 1000;
 		do_div(count, 0x7fffffffUL);
 		retval = count + 1;
@@ -251,7 +251,7 @@ static void write_watchdog_counter(unsigned int perfctr_msr,
 	u64 count = (u64)cpu_khz * 1000;
 
 	do_div(count, nmi_hz);
-	if(descr)
+	if (descr)
 		pr_debug("setting %s to -0x%08Lx\n", descr, count);
 	wrmsrl(perfctr_msr, 0 - count);
 }
@@ -262,7 +262,7 @@ static void write_watchdog_counter32(unsigned int perfctr_msr,
 	u64 count = (u64)cpu_khz * 1000;
 
 	do_div(count, nmi_hz);
-	if(descr)
+	if (descr)
 		pr_debug("setting %s to -0x%08Lx\n", descr, count);
 	wrmsr(perfctr_msr, (u32)(-count), 0);
 }
@@ -296,7 +296,7 @@ static int setup_k7_watchdog(unsigned nmi_hz)
 
 	/* setup the timer */
 	wrmsr(evntsel_msr, evntsel, 0);
-	write_watchdog_counter(perfctr_msr, "K7_PERFCTR0",nmi_hz);
+	write_watchdog_counter(perfctr_msr, "K7_PERFCTR0", nmi_hz);
 
 	/* initialize the wd struct before enabling */
 	wd->perfctr_msr = perfctr_msr;
@@ -387,7 +387,7 @@ static int setup_p6_watchdog(unsigned nmi_hz)
 	/* setup the timer */
 	wrmsr(evntsel_msr, evntsel, 0);
 	nmi_hz = adjust_for_32bit_ctr(nmi_hz);
-	write_watchdog_counter32(perfctr_msr, "P6_PERFCTR0",nmi_hz);
+	write_watchdog_counter32(perfctr_msr, "P6_PERFCTR0", nmi_hz);
 
 	/* initialize the wd struct before enabling */
 	wd->perfctr_msr = perfctr_msr;
@@ -415,7 +415,7 @@ static void __kprobes p6_rearm(struct nmi_watchdog_ctlblk *wd, unsigned nmi_hz)
 	apic_write(APIC_LVTPC, APIC_DM_NMI);
 
 	/* P6/ARCH_PERFMON has 32 bit counter write */
-	write_watchdog_counter32(wd->perfctr_msr, NULL,nmi_hz);
+	write_watchdog_counter32(wd->perfctr_msr, NULL, nmi_hz);
 }
 
 static const struct wd_ops p6_wd_ops = {
@@ -490,9 +490,9 @@ static int setup_p4_watchdog(unsigned nmi_hz)
 	if (smp_num_siblings == 2) {
 		unsigned int ebx, apicid;
 
-        	ebx = cpuid_ebx(1);
-	        apicid = (ebx >> 24) & 0xff;
-        	ht_num = apicid & 1;
+		ebx = cpuid_ebx(1);
+		apicid = (ebx >> 24) & 0xff;
+		ht_num = apicid & 1;
 	} else
 #endif
 		ht_num = 0;
@@ -544,7 +544,7 @@ static int setup_p4_watchdog(unsigned nmi_hz)
 	}
 
 	evntsel = P4_ESCR_EVENT_SELECT(0x3F)
-	 	| P4_ESCR_OS
+		| P4_ESCR_OS
 		| P4_ESCR_USR;
 
 	cccr_val |= P4_CCCR_THRESHOLD(15)
@@ -612,7 +612,7 @@ static void __kprobes p4_rearm(struct nmi_watchdog_ctlblk *wd, unsigned nmi_hz)
 {
 	unsigned dummy;
 	/*
- 	 * P4 quirks:
+	 * P4 quirks:
 	 * - An overflown perfctr will assert its interrupt
 	 *   until the OVF flag in its CCCR is cleared.
 	 * - LVTPC is masked on interrupt and must be
@@ -662,7 +662,8 @@ static int setup_intel_arch_watchdog(unsigned nmi_hz)
 	 * NOTE: Corresponding bit = 0 in ebx indicates event present.
 	 */
 	cpuid(10, &(eax.full), &ebx, &unused, &unused);
-	if ((eax.split.mask_length < (ARCH_PERFMON_UNHALTED_CORE_CYCLES_INDEX+1)) ||
+	if ((eax.split.mask_length <
+			(ARCH_PERFMON_UNHALTED_CORE_CYCLES_INDEX+1)) ||
 	    (ebx & ARCH_PERFMON_UNHALTED_CORE_CYCLES_PRESENT))
 		return 0;
 
diff --git a/arch/x86/kernel/cpu/proc.c b/arch/x86/kernel/cpu/proc.c
index d5e30397246..1e904346bbf 100644
--- a/arch/x86/kernel/cpu/proc.c
+++ b/arch/x86/kernel/cpu/proc.c
@@ -128,7 +128,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 			if (i < ARRAY_SIZE(x86_power_flags) &&
 			    x86_power_flags[i])
 				seq_printf(m, "%s%s",
-					   x86_power_flags[i][0]?" ":"",
+					   x86_power_flags[i][0] ? " " : "",
 					   x86_power_flags[i]);
 			else
 				seq_printf(m, " [%d]", i);
diff --git a/arch/x86/kernel/cpu/vmware.c b/arch/x86/kernel/cpu/vmware.c
index 284c399e323..bc24f514ec9 100644
--- a/arch/x86/kernel/cpu/vmware.c
+++ b/arch/x86/kernel/cpu/vmware.c
@@ -49,17 +49,17 @@ static inline int __vmware_platform(void)
 
 static unsigned long __vmware_get_tsc_khz(void)
 {
-        uint64_t tsc_hz;
-        uint32_t eax, ebx, ecx, edx;
+	uint64_t tsc_hz;
+	uint32_t eax, ebx, ecx, edx;
 
-        VMWARE_PORT(GETHZ, eax, ebx, ecx, edx);
+	VMWARE_PORT(GETHZ, eax, ebx, ecx, edx);
 
-        if (ebx == UINT_MAX)
-                return 0;
-        tsc_hz = eax | (((uint64_t)ebx) << 32);
-        do_div(tsc_hz, 1000);
-        BUG_ON(tsc_hz >> 32);
-        return tsc_hz;
+	if (ebx == UINT_MAX)
+		return 0;
+	tsc_hz = eax | (((uint64_t)ebx) << 32);
+	do_div(tsc_hz, 1000);
+	BUG_ON(tsc_hz >> 32);
+	return tsc_hz;
 }
 
 /*
-- 
cgit v1.2.3


From 406f104b4172de7452702c6810807c1b0132ba22 Mon Sep 17 00:00:00 2001
From: Herbert Xu <herbert@gondor.apana.org.au>
Date: Fri, 10 Jul 2009 13:18:26 +0800
Subject: crypto: sha1-s390 - Add export/import support

This patch adds export/import support to sha1-s390.  The exported
type is defined by struct sha1_state, which is basically the entire
descriptor state of sha1_generic.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
---
 arch/s390/crypto/sha1_s390.c | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

(limited to 'arch')

diff --git a/arch/s390/crypto/sha1_s390.c b/arch/s390/crypto/sha1_s390.c
index e85ba348722..2c5ec7969e3 100644
--- a/arch/s390/crypto/sha1_s390.c
+++ b/arch/s390/crypto/sha1_s390.c
@@ -46,12 +46,38 @@ static int sha1_init(struct shash_desc *desc)
 	return 0;
 }
 
+static int sha1_export(struct shash_desc *desc, void *out)
+{
+	struct s390_sha_ctx *sctx = shash_desc_ctx(desc);
+	struct sha1_state *octx = out;
+
+	octx->count = sctx->count;
+	memcpy(octx->state, sctx->state, sizeof(octx->state));
+	memcpy(octx->buffer, sctx->buf, sizeof(octx->buffer));
+	return 0;
+}
+
+static int sha1_import(struct shash_desc *desc, const u8 *in)
+{
+	struct sha1_state *sctx = shash_desc_ctx(desc);
+	struct sha1_state *ictx = in;
+
+	sctx->count = ictx->count;
+	memcpy(sctx->state, ictx->state, sizeof(ictx->state));
+	memcpy(sctx->buf, ictx->buffer, sizeof(ictx->buffer));
+	sctx->func = KIMD_SHA_1;
+	return 0;
+}
+
 static struct shash_alg alg = {
 	.digestsize	=	SHA1_DIGEST_SIZE,
 	.init		=	sha1_init,
 	.update		=	s390_sha_update,
 	.final		=	s390_sha_final,
+	.export		=	sha1_export,
+	.import		=	sha1_import,
 	.descsize	=	sizeof(struct s390_sha_ctx),
+	.statesize	=	sizeof(struct sha1_state),
 	.base		=	{
 		.cra_name	=	"sha1",
 		.cra_driver_name=	"sha1-s390",
-- 
cgit v1.2.3


From f63559bef380a95093408691c1081f07da755b74 Mon Sep 17 00:00:00 2001
From: Herbert Xu <herbert@gondor.apana.org.au>
Date: Fri, 10 Jul 2009 13:20:32 +0800
Subject: crypto: sha256-s390 - Add export/import support

This patch adds export/import support to sha256-s390.  The exported
type is defined by struct sha256_state, which is basically the entire
descriptor state of sha256_generic.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
---
 arch/s390/crypto/sha256_s390.c | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

(limited to 'arch')

diff --git a/arch/s390/crypto/sha256_s390.c b/arch/s390/crypto/sha256_s390.c
index f9fefc56963..943a669452c 100644
--- a/arch/s390/crypto/sha256_s390.c
+++ b/arch/s390/crypto/sha256_s390.c
@@ -42,12 +42,38 @@ static int sha256_init(struct shash_desc *desc)
 	return 0;
 }
 
+static int sha256_export(struct shash_desc *desc, void *out)
+{
+	struct s390_sha_ctx *sctx = shash_desc_ctx(desc);
+	struct sha256_state *octx = out;
+
+	octx->count = sctx->count;
+	memcpy(octx->state, sctx->state, sizeof(octx->state));
+	memcpy(octx->buf, sctx->buf, sizeof(octx->buf));
+	return 0;
+}
+
+static int sha256_import(struct shash_desc *desc, const u8 *in)
+{
+	struct sha256_state *sctx = shash_desc_ctx(desc);
+	struct sha256_state *ictx = in;
+
+	sctx->count = ictx->count;
+	memcpy(sctx->state, ictx->state, sizeof(ictx->state));
+	memcpy(sctx->buf, ictx->buf, sizeof(ictx->buf));
+	sctx->func = KIMD_SHA_256;
+	return 0;
+}
+
 static struct shash_alg alg = {
 	.digestsize	=	SHA256_DIGEST_SIZE,
 	.init		=	sha256_init,
 	.update		=	s390_sha_update,
 	.final		=	s390_sha_final,
+	.export		=	sha256_export,
+	.import		=	sha256_import,
 	.descsize	=	sizeof(struct s390_sha_ctx),
+	.statesize	=	sizeof(struct sha256_state),
 	.base		=	{
 		.cra_name	=	"sha256",
 		.cra_driver_name=	"sha256-s390",
-- 
cgit v1.2.3


From ee0049d49ad2556222a7b3127be2dae11982f7b3 Mon Sep 17 00:00:00 2001
From: Huang Weiyi <weiyi.huang@gmail.com>
Date: Sat, 11 Jul 2009 09:31:58 +0800
Subject: [ARM] remove duplicated #include

Remove duplicated #include('s) in
  arch/arm/mach-mx3/devices.c
  arch/arm/mach-omap1/mcbsp.c
  arch/arm/mach-omap2/mcbsp.c
  arch/arm/plat-stmp3xxx/pinmux.c

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-mx3/devices.c     | 1 -
 arch/arm/mach-omap1/mcbsp.c     | 1 -
 arch/arm/mach-omap2/mcbsp.c     | 1 -
 arch/arm/plat-stmp3xxx/pinmux.c | 1 -
 4 files changed, 4 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
index d927eddcad4..9e87e08fb12 100644
--- a/arch/arm/mach-mx3/devices.c
+++ b/arch/arm/mach-mx3/devices.c
@@ -22,7 +22,6 @@
 #include <linux/platform_device.h>
 #include <linux/serial.h>
 #include <linux/gpio.h>
-#include <linux/dma-mapping.h>
 #include <mach/hardware.h>
 #include <mach/irqs.h>
 #include <mach/common.h>
diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c
index a2d7814896b..505d98cfe50 100644
--- a/arch/arm/mach-omap1/mcbsp.c
+++ b/arch/arm/mach-omap1/mcbsp.c
@@ -19,7 +19,6 @@
 
 #include <mach/irqs.h>
 #include <mach/dma.h>
-#include <mach/irqs.h>
 #include <mach/mux.h>
 #include <mach/cpu.h>
 #include <mach/mcbsp.h>
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index a5c0f0435cd..99b6e154631 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -19,7 +19,6 @@
 
 #include <mach/irqs.h>
 #include <mach/dma.h>
-#include <mach/irqs.h>
 #include <mach/mux.h>
 #include <mach/cpu.h>
 #include <mach/mcbsp.h>
diff --git a/arch/arm/plat-stmp3xxx/pinmux.c b/arch/arm/plat-stmp3xxx/pinmux.c
index d4120038220..6d6b1a468ed 100644
--- a/arch/arm/plat-stmp3xxx/pinmux.c
+++ b/arch/arm/plat-stmp3xxx/pinmux.c
@@ -22,7 +22,6 @@
 #include <linux/sysdev.h>
 #include <linux/string.h>
 #include <linux/bitops.h>
-#include <linux/sysdev.h>
 #include <linux/irq.h>
 
 #include <mach/hardware.h>
-- 
cgit v1.2.3


From f7a55fa6ecef8be6d15bd79a803e44a3187ce9d6 Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Sat, 11 Jul 2009 16:51:40 +0100
Subject: [ARM] remove L_PTE_BUFFERABLE and L_PTE_CACHEABLE

These old symbols are meaningless now that we have memory type
support implemented.  The entire memory type field needs to be
modified rather than just a few bits twiddled.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/pgtable.h | 2 --
 arch/arm/mm/proc-macros.S      | 6 ------
 2 files changed, 8 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
index c433c6c7311..d575666d5c4 100644
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -164,8 +164,6 @@ extern void __pgd_error(const char *file, int line, unsigned long val);
 #define L_PTE_PRESENT		(1 << 0)
 #define L_PTE_FILE		(1 << 1)	/* only when !PRESENT */
 #define L_PTE_YOUNG		(1 << 1)
-#define L_PTE_BUFFERABLE	(1 << 2)	/* obsolete, matches PTE */
-#define L_PTE_CACHEABLE		(1 << 3)	/* obsolete, matches PTE */
 #define L_PTE_DIRTY		(1 << 6)
 #define L_PTE_WRITE		(1 << 7)
 #define L_PTE_USER		(1 << 8)
diff --git a/arch/arm/mm/proc-macros.S b/arch/arm/mm/proc-macros.S
index 54b1f721dec..a0b3f36f317 100644
--- a/arch/arm/mm/proc-macros.S
+++ b/arch/arm/mm/proc-macros.S
@@ -80,12 +80,6 @@
 #if L_PTE_SHARED != PTE_EXT_SHARED
 #error PTE shared bit mismatch
 #endif
-#if L_PTE_BUFFERABLE != PTE_BUFFERABLE
-#error PTE bufferable bit mismatch
-#endif
-#if L_PTE_CACHEABLE != PTE_CACHEABLE
-#error PTE cacheable bit mismatch
-#endif
 #if (L_PTE_EXEC+L_PTE_USER+L_PTE_WRITE+L_PTE_DIRTY+L_PTE_YOUNG+\
      L_PTE_FILE+L_PTE_PRESENT) > L_PTE_SHARED
 #error Invalid Linux PTE bit settings
-- 
cgit v1.2.3


From 6a00cded91532f3d58e07729ba56269339281d8e Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Sat, 11 Jul 2009 16:57:20 +0100
Subject: [ARM] pgtable: rearrange file PTE bit allocation

For future compatibility, we need to ensure that swap and file Linux
PTEs conform with the hardware PTEs "fault" encoding.  Swap PTEs
already fit in with this, but file PTEs do not.  Shift them by one
bit to ensure that they conform, using bit 2 to distinguish between
swap and file PTEs.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/pgtable.h | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
index d575666d5c4..9655bce3d34 100644
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -162,8 +162,8 @@ extern void __pgd_error(const char *file, int line, unsigned long val);
  * entries are stored 1024 bytes below.
  */
 #define L_PTE_PRESENT		(1 << 0)
-#define L_PTE_FILE		(1 << 1)	/* only when !PRESENT */
 #define L_PTE_YOUNG		(1 << 1)
+#define L_PTE_FILE		(1 << 2)	/* only when !PRESENT */
 #define L_PTE_DIRTY		(1 << 6)
 #define L_PTE_WRITE		(1 << 7)
 #define L_PTE_USER		(1 << 8)
@@ -379,13 +379,13 @@ extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
  *
  *   3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
  *   1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- *   <--------------- offset --------------------> <--- type --> 0 0
+ *   <--------------- offset --------------------> <- type --> 0 0 0
  *
- * This gives us up to 127 swap files and 32GB per swap file.  Note that
+ * This gives us up to 63 swap files and 32GB per swap file.  Note that
  * the offset field is always non-zero.
  */
-#define __SWP_TYPE_SHIFT	2
-#define __SWP_TYPE_BITS		7
+#define __SWP_TYPE_SHIFT	3
+#define __SWP_TYPE_BITS		6
 #define __SWP_TYPE_MASK		((1 << __SWP_TYPE_BITS) - 1)
 #define __SWP_OFFSET_SHIFT	(__SWP_TYPE_BITS + __SWP_TYPE_SHIFT)
 
@@ -409,13 +409,13 @@ extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
  *
  *   3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
  *   1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- *   <------------------------ offset -------------------------> 1 0
+ *   <----------------------- offset ------------------------> 1 0 0
  */
 #define pte_file(pte)		(pte_val(pte) & L_PTE_FILE)
-#define pte_to_pgoff(x)		(pte_val(x) >> 2)
-#define pgoff_to_pte(x)		__pte(((x) << 2) | L_PTE_FILE)
+#define pte_to_pgoff(x)		(pte_val(x) >> 3)
+#define pgoff_to_pte(x)		__pte(((x) << 3) | L_PTE_FILE)
 
-#define PTE_FILE_MAX_BITS	30
+#define PTE_FILE_MAX_BITS	29
 
 /* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
 /* FIXME: this is not correct */
-- 
cgit v1.2.3


From 5396730b3caad500ceba84c9391143cafb5938a8 Mon Sep 17 00:00:00 2001
From: Hartley Sweeten <hartleys@visionengravers.com>
Date: Thu, 9 Jul 2009 23:22:07 +0100
Subject: [ARM] 5598/1: ep93xx: core.c typesafe vic_init

The EP93XX_VIC{1/2}_BASE defines are now typesafe due to
[ARM] 5573/1: ep93xx: ensure typesafe io.  The (void *) cast
is not needed when calling vic_init().

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ep93xx/core.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index ce10f5b5dfb..68ac0545f57 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -345,8 +345,8 @@ void __init ep93xx_init_irq(void)
 {
 	int gpio_irq;
 
-	vic_init((void *)EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK, 0);
-	vic_init((void *)EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK, 0);
+	vic_init(EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK, 0);
+	vic_init(EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK, 0);
 
 	for (gpio_irq = gpio_to_irq(0);
 	     gpio_irq <= gpio_to_irq(EP93XX_GPIO_LINE_MAX_IRQ); ++gpio_irq) {
-- 
cgit v1.2.3


From 8045a4c293d36c61656a20d581b11f7f0cd7acd5 Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Tue, 7 Jul 2009 19:30:25 +0200
Subject: x86/oprofile: Fix cast of counter value

When casting the counter value to a 64 bit value in 32 bit mode, sign
extension may lead to broken counter values. This patch fixes this by
casting to (u64) instead of (s64).

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/op_model_amd.c | 4 ++--
 arch/x86/oprofile/op_model_p4.c  | 6 +++---
 2 files changed, 5 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/op_model_amd.c b/arch/x86/oprofile/op_model_amd.c
index e95268eb922..7ca8306aefa 100644
--- a/arch/x86/oprofile/op_model_amd.c
+++ b/arch/x86/oprofile/op_model_amd.c
@@ -111,7 +111,7 @@ static void op_amd_setup_ctrs(struct op_x86_model_spec const *model,
 		if (counter_config[i].enabled && msrs->counters[i].addr) {
 			reset_value[i] = counter_config[i].count;
 			wrmsrl(msrs->counters[i].addr,
-			       -(s64)counter_config[i].count);
+			       -(u64)counter_config[i].count);
 			rdmsrl(msrs->controls[i].addr, val);
 			val &= model->reserved;
 			val |= op_x86_get_ctrl(model, &counter_config[i]);
@@ -237,7 +237,7 @@ static int op_amd_check_ctrs(struct pt_regs * const regs,
 		if (val & OP_CTR_OVERFLOW)
 			continue;
 		oprofile_add_sample(regs, i);
-		wrmsrl(msrs->counters[i].addr, -(s64)reset_value[i]);
+		wrmsrl(msrs->counters[i].addr, -(u64)reset_value[i]);
 	}
 
 	op_amd_handle_ibs(regs, msrs);
diff --git a/arch/x86/oprofile/op_model_p4.c b/arch/x86/oprofile/op_model_p4.c
index f01e53b118f..9db9e361182 100644
--- a/arch/x86/oprofile/op_model_p4.c
+++ b/arch/x86/oprofile/op_model_p4.c
@@ -580,7 +580,7 @@ static void p4_setup_ctrs(struct op_x86_model_spec const *model,
 			reset_value[i] = counter_config[i].count;
 			pmc_setup_one_p4_counter(i);
 			wrmsrl(p4_counters[VIRT_CTR(stag, i)].counter_address,
-			       -(s64)counter_config[i].count);
+			       -(u64)counter_config[i].count);
 		} else {
 			reset_value[i] = 0;
 		}
@@ -625,11 +625,11 @@ static int p4_check_ctrs(struct pt_regs * const regs,
 		if (CCCR_OVF_P(low) || !(ctr & OP_CTR_OVERFLOW)) {
 			oprofile_add_sample(regs, i);
 			wrmsrl(p4_counters[real].counter_address,
-			       -(s64)reset_value[i]);
+			       -(u64)reset_value[i]);
 			CCCR_CLEAR_OVF(low);
 			wrmsr(p4_counters[real].cccr_address, low, high);
 			wrmsrl(p4_counters[real].counter_address,
-			       -(s64)reset_value[i]);
+			       -(u64)reset_value[i]);
 		}
 	}
 
-- 
cgit v1.2.3


From 44ab9a6b0e909145d42615493952fe986b1ce5c2 Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Thu, 9 Jul 2009 18:33:02 +0200
Subject: x86/oprofile: Rework and simplify nmi_cpu_setup()

This patch removes the function nmi_save_registers(). Per-cpu code is
now executed only in the function nmi_cpu_setup().  Also, it renames
the per-cpu function nmi_restore_registers() to
nmi_cpu_restore_registers().

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/nmi_int.c | 13 +++----------
 1 file changed, 3 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index 93df76dd60f..25da1e17815 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -87,13 +87,6 @@ static void nmi_cpu_save_registers(struct op_msrs *msrs)
 	}
 }
 
-static void nmi_save_registers(void *dummy)
-{
-	int cpu = smp_processor_id();
-	struct op_msrs *msrs = &per_cpu(cpu_msrs, cpu);
-	nmi_cpu_save_registers(msrs);
-}
-
 static void free_msrs(void)
 {
 	int i;
@@ -137,6 +130,7 @@ static void nmi_cpu_setup(void *dummy)
 {
 	int cpu = smp_processor_id();
 	struct op_msrs *msrs = &per_cpu(cpu_msrs, cpu);
+	nmi_cpu_save_registers(msrs);
 	spin_lock(&oprofilefs_lock);
 	model->setup_ctrs(model, msrs);
 	spin_unlock(&oprofilefs_lock);
@@ -182,13 +176,12 @@ static int nmi_setup(void)
 		}
 
 	}
-	on_each_cpu(nmi_save_registers, NULL, 1);
 	on_each_cpu(nmi_cpu_setup, NULL, 1);
 	nmi_enabled = 1;
 	return 0;
 }
 
-static void nmi_restore_registers(struct op_msrs *msrs)
+static void nmi_cpu_restore_registers(struct op_msrs *msrs)
 {
 	struct op_msr *counters = msrs->counters;
 	struct op_msr *controls = msrs->controls;
@@ -220,7 +213,7 @@ static void nmi_cpu_shutdown(void *dummy)
 	apic_write(APIC_LVTERR, v | APIC_LVT_MASKED);
 	apic_write(APIC_LVTPC, per_cpu(saved_lvtpc, cpu));
 	apic_write(APIC_LVTERR, v);
-	nmi_restore_registers(msrs);
+	nmi_cpu_restore_registers(msrs);
 }
 
 static void nmi_shutdown(void)
-- 
cgit v1.2.3


From 6e63ea4b0b14ff5fb8a3ca704fcda7d28b95f079 Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Tue, 7 Jul 2009 19:25:39 +0200
Subject: x86/oprofile: Whitespaces changes only

This patch fixes whitespace changes of code that will be touched in
follow-on patches.

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/nmi_int.c       | 12 ++++++------
 arch/x86/oprofile/op_model_amd.c  | 12 ++++++------
 arch/x86/oprofile/op_model_p4.c   |  8 ++++----
 arch/x86/oprofile/op_model_ppro.c |  8 ++++----
 4 files changed, 20 insertions(+), 20 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index 25da1e17815..fca8dc94531 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -516,12 +516,12 @@ int __init op_nmi_init(struct oprofile_operations *ops)
 	register_cpu_notifier(&oprofile_cpu_nb);
 #endif
 	/* default values, can be overwritten by model */
-	ops->create_files = nmi_create_files;
-	ops->setup = nmi_setup;
-	ops->shutdown = nmi_shutdown;
-	ops->start = nmi_start;
-	ops->stop = nmi_stop;
-	ops->cpu_type = cpu_type;
+	ops->create_files	= nmi_create_files;
+	ops->setup		= nmi_setup;
+	ops->shutdown		= nmi_shutdown;
+	ops->start		= nmi_start;
+	ops->stop		= nmi_stop;
+	ops->cpu_type		= cpu_type;
 
 	if (model->init)
 		ret = model->init(ops);
diff --git a/arch/x86/oprofile/op_model_amd.c b/arch/x86/oprofile/op_model_amd.c
index 7ca8306aefa..f676f8825a3 100644
--- a/arch/x86/oprofile/op_model_amd.c
+++ b/arch/x86/oprofile/op_model_amd.c
@@ -91,7 +91,7 @@ static void op_amd_setup_ctrs(struct op_x86_model_spec const *model,
 	int i;
 
 	/* clear all counters */
-	for (i = 0 ; i < NUM_CONTROLS; ++i) {
+	for (i = 0; i < NUM_CONTROLS; ++i) {
 		if (unlikely(!msrs->controls[i].addr))
 			continue;
 		rdmsrl(msrs->controls[i].addr, val);
@@ -229,7 +229,7 @@ static int op_amd_check_ctrs(struct pt_regs * const regs,
 	u64 val;
 	int i;
 
-	for (i = 0 ; i < NUM_COUNTERS; ++i) {
+	for (i = 0; i < NUM_COUNTERS; ++i) {
 		if (!reset_value[i])
 			continue;
 		rdmsrl(msrs->counters[i].addr, val);
@@ -250,7 +250,7 @@ static void op_amd_start(struct op_msrs const * const msrs)
 {
 	u64 val;
 	int i;
-	for (i = 0 ; i < NUM_COUNTERS ; ++i) {
+	for (i = 0; i < NUM_COUNTERS; ++i) {
 		if (reset_value[i]) {
 			rdmsrl(msrs->controls[i].addr, val);
 			val |= ARCH_PERFMON_EVENTSEL0_ENABLE;
@@ -270,7 +270,7 @@ static void op_amd_stop(struct op_msrs const * const msrs)
 	 * Subtle: stop on all counters to avoid race with setting our
 	 * pm callback
 	 */
-	for (i = 0 ; i < NUM_COUNTERS ; ++i) {
+	for (i = 0; i < NUM_COUNTERS; ++i) {
 		if (!reset_value[i])
 			continue;
 		rdmsrl(msrs->controls[i].addr, val);
@@ -285,11 +285,11 @@ static void op_amd_shutdown(struct op_msrs const * const msrs)
 {
 	int i;
 
-	for (i = 0 ; i < NUM_COUNTERS ; ++i) {
+	for (i = 0; i < NUM_COUNTERS; ++i) {
 		if (msrs->counters[i].addr)
 			release_perfctr_nmi(MSR_K7_PERFCTR0 + i);
 	}
-	for (i = 0 ; i < NUM_CONTROLS ; ++i) {
+	for (i = 0; i < NUM_CONTROLS; ++i) {
 		if (msrs->controls[i].addr)
 			release_evntsel_nmi(MSR_K7_EVNTSEL0 + i);
 	}
diff --git a/arch/x86/oprofile/op_model_p4.c b/arch/x86/oprofile/op_model_p4.c
index 9db9e361182..5921b7fc724 100644
--- a/arch/x86/oprofile/op_model_p4.c
+++ b/arch/x86/oprofile/op_model_p4.c
@@ -558,7 +558,7 @@ static void p4_setup_ctrs(struct op_x86_model_spec const *model,
 	}
 
 	/* clear the cccrs we will use */
-	for (i = 0 ; i < num_counters ; i++) {
+	for (i = 0; i < num_counters; i++) {
 		if (unlikely(!msrs->controls[i].addr))
 			continue;
 		rdmsr(p4_counters[VIRT_CTR(stag, i)].cccr_address, low, high);
@@ -575,7 +575,7 @@ static void p4_setup_ctrs(struct op_x86_model_spec const *model,
 	}
 
 	/* setup all counters */
-	for (i = 0 ; i < num_counters ; ++i) {
+	for (i = 0; i < num_counters; ++i) {
 		if (counter_config[i].enabled && msrs->controls[i].addr) {
 			reset_value[i] = counter_config[i].count;
 			pmc_setup_one_p4_counter(i);
@@ -678,7 +678,7 @@ static void p4_shutdown(struct op_msrs const * const msrs)
 {
 	int i;
 
-	for (i = 0 ; i < num_counters ; ++i) {
+	for (i = 0; i < num_counters; ++i) {
 		if (msrs->counters[i].addr)
 			release_perfctr_nmi(msrs->counters[i].addr);
 	}
@@ -687,7 +687,7 @@ static void p4_shutdown(struct op_msrs const * const msrs)
 	 * conjunction with the counter registers (hence the starting offset).
 	 * This saves a few bits.
 	 */
-	for (i = num_counters ; i < num_controls ; ++i) {
+	for (i = num_counters; i < num_controls; ++i) {
 		if (msrs->controls[i].addr)
 			release_evntsel_nmi(msrs->controls[i].addr);
 	}
diff --git a/arch/x86/oprofile/op_model_ppro.c b/arch/x86/oprofile/op_model_ppro.c
index cd72d5c73b4..570d717c330 100644
--- a/arch/x86/oprofile/op_model_ppro.c
+++ b/arch/x86/oprofile/op_model_ppro.c
@@ -81,7 +81,7 @@ static void ppro_setup_ctrs(struct op_x86_model_spec const *model,
 	}
 
 	/* clear all counters */
-	for (i = 0 ; i < num_counters; ++i) {
+	for (i = 0; i < num_counters; ++i) {
 		if (unlikely(!msrs->controls[i].addr))
 			continue;
 		rdmsrl(msrs->controls[i].addr, val);
@@ -125,7 +125,7 @@ static int ppro_check_ctrs(struct pt_regs * const regs,
 	if (unlikely(!reset_value))
 		goto out;
 
-	for (i = 0 ; i < num_counters; ++i) {
+	for (i = 0; i < num_counters; ++i) {
 		if (!reset_value[i])
 			continue;
 		rdmsrl(msrs->counters[i].addr, val);
@@ -188,11 +188,11 @@ static void ppro_shutdown(struct op_msrs const * const msrs)
 {
 	int i;
 
-	for (i = 0 ; i < num_counters ; ++i) {
+	for (i = 0; i < num_counters; ++i) {
 		if (msrs->counters[i].addr)
 			release_perfctr_nmi(MSR_P6_PERFCTR0 + i);
 	}
-	for (i = 0 ; i < num_counters ; ++i) {
+	for (i = 0; i < num_counters; ++i) {
 		if (msrs->controls[i].addr)
 			release_evntsel_nmi(MSR_P6_EVNTSEL0 + i);
 	}
-- 
cgit v1.2.3


From 6b2b171a774af256082635b53ac387b1613b7b4c Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Mon, 8 Jun 2009 02:53:50 -0700
Subject: x86/acpi: acpi_parse_madt_ioapic_entries: remove redundant braces

We don't put braces around a single statement.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/kernel/acpi/boot.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 6b8ca3a0285..ce31c1af854 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -1179,9 +1179,8 @@ static int __init acpi_parse_madt_ioapic_entries(void)
 	 * If MPS is present, it will handle them,
 	 * otherwise the system will stay in PIC mode
 	 */
-	if (acpi_disabled || acpi_noirq) {
+	if (acpi_disabled || acpi_noirq)
 		return -ENODEV;
-	}
 
 	if (!cpu_has_apic)
 		return -ENODEV;
-- 
cgit v1.2.3


From 2f210deba9887dd9143b63b217506f1ac152e91c Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Mon, 8 Jun 2009 02:55:22 -0700
Subject: x86/ioapic.c: ioapic_modify_irq is too large to inline

If ioapic_modify_irq() is marked inline, it gets inlined several times.
Un-inlining it saves around 200 bytes in .text for me.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/kernel/apic/io_apic.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 90b5e6efa93..82271eb87bb 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -556,9 +556,9 @@ static void __init replace_pin_at_irq_node(struct irq_cfg *cfg, int node,
 		add_pin_to_irq_node(cfg, node, newapic, newpin);
 }
 
-static inline void io_apic_modify_irq(struct irq_cfg *cfg,
-				int mask_and, int mask_or,
-				void (*final)(struct irq_pin_list *entry))
+static void io_apic_modify_irq(struct irq_cfg *cfg,
+			       int mask_and, int mask_or,
+			       void (*final)(struct irq_pin_list *entry))
 {
 	int pin;
 	struct irq_pin_list *entry;
-- 
cgit v1.2.3


From 890aeacf64c55a7ada7054a140d249ab13899f2d Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Mon, 8 Jun 2009 02:57:43 -0700
Subject: x86/ioapic.c: unify __mask_IO_APIC_irq()

The main difference between 32 and 64-bit __mask_IO_APIC_irq() does a
readback from the I/O APIC to synchronize it.

If there's a hardware requirement to do a readback sync after updating
an APIC register, then it will be a hardware requrement regardless of
whether the kernel is compiled 32 or 64-bit.

Unify __mask_IO_APIC_irq() using the 64-bit version which always syncs
with io_apic_sync().

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/kernel/apic/io_apic.c | 7 +------
 1 file changed, 1 insertion(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 82271eb87bb..f8aa5461071 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -580,7 +580,6 @@ static void __unmask_IO_APIC_irq(struct irq_cfg *cfg)
 	io_apic_modify_irq(cfg, ~IO_APIC_REDIR_MASKED, 0, NULL);
 }
 
-#ifdef CONFIG_X86_64
 static void io_apic_sync(struct irq_pin_list *entry)
 {
 	/*
@@ -596,12 +595,8 @@ static void __mask_IO_APIC_irq(struct irq_cfg *cfg)
 {
 	io_apic_modify_irq(cfg, ~0, IO_APIC_REDIR_MASKED, &io_apic_sync);
 }
-#else /* CONFIG_X86_32 */
-static void __mask_IO_APIC_irq(struct irq_cfg *cfg)
-{
-	io_apic_modify_irq(cfg, ~0, IO_APIC_REDIR_MASKED, NULL);
-}
 
+#ifdef CONFIG_X86_32
 static void __mask_and_edge_IO_APIC_irq(struct irq_cfg *cfg)
 {
 	io_apic_modify_irq(cfg, ~IO_APIC_REDIR_LEVEL_TRIGGER,
-- 
cgit v1.2.3


From 916a0fe739f151664f7f07b42543ae6fd4caec49 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Mon, 8 Jun 2009 03:00:22 -0700
Subject: x86/ioapic.c: remove #ifdef for 82093AA workaround

While no 64-bit hardware will have a version 0x11 I/O APIC which needs
the level/edge bug workaround, that's not a particular reason to use
CONFIG_X86_32 to #ifdef the code out.  Most 32-bit machines will no
longer need the workaround either, so the test to see whether it is
necessary should be more fine-grained than "32-bit=yes, 64-bit=no".

(Also fix formatting of block comment.)

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/kernel/apic/io_apic.c | 47 +++++++++++++++++-------------------------
 1 file changed, 19 insertions(+), 28 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index f8aa5461071..1a341444258 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -596,7 +596,6 @@ static void __mask_IO_APIC_irq(struct irq_cfg *cfg)
 	io_apic_modify_irq(cfg, ~0, IO_APIC_REDIR_MASKED, &io_apic_sync);
 }
 
-#ifdef CONFIG_X86_32
 static void __mask_and_edge_IO_APIC_irq(struct irq_cfg *cfg)
 {
 	io_apic_modify_irq(cfg, ~IO_APIC_REDIR_LEVEL_TRIGGER,
@@ -608,7 +607,6 @@ static void __unmask_and_level_IO_APIC_irq(struct irq_cfg *cfg)
 	io_apic_modify_irq(cfg, ~IO_APIC_REDIR_MASKED,
 			IO_APIC_REDIR_LEVEL_TRIGGER, NULL);
 }
-#endif /* CONFIG_X86_32 */
 
 static void mask_IO_APIC_irq_desc(struct irq_desc *desc)
 {
@@ -2510,11 +2508,8 @@ atomic_t irq_mis_count;
 static void ack_apic_level(unsigned int irq)
 {
 	struct irq_desc *desc = irq_to_desc(irq);
-
-#ifdef CONFIG_X86_32
 	unsigned long v;
 	int i;
-#endif
 	struct irq_cfg *cfg;
 	int do_unmask_irq = 0;
 
@@ -2527,31 +2522,28 @@ static void ack_apic_level(unsigned int irq)
 	}
 #endif
 
-#ifdef CONFIG_X86_32
 	/*
-	* It appears there is an erratum which affects at least version 0x11
-	* of I/O APIC (that's the 82093AA and cores integrated into various
-	* chipsets).  Under certain conditions a level-triggered interrupt is
-	* erroneously delivered as edge-triggered one but the respective IRR
-	* bit gets set nevertheless.  As a result the I/O unit expects an EOI
-	* message but it will never arrive and further interrupts are blocked
-	* from the source.  The exact reason is so far unknown, but the
-	* phenomenon was observed when two consecutive interrupt requests
-	* from a given source get delivered to the same CPU and the source is
-	* temporarily disabled in between.
-	*
-	* A workaround is to simulate an EOI message manually.  We achieve it
-	* by setting the trigger mode to edge and then to level when the edge
-	* trigger mode gets detected in the TMR of a local APIC for a
-	* level-triggered interrupt.  We mask the source for the time of the
-	* operation to prevent an edge-triggered interrupt escaping meanwhile.
-	* The idea is from Manfred Spraul.  --macro
-	*/
+	 * It appears there is an erratum which affects at least version 0x11
+	 * of I/O APIC (that's the 82093AA and cores integrated into various
+	 * chipsets).  Under certain conditions a level-triggered interrupt is
+	 * erroneously delivered as edge-triggered one but the respective IRR
+	 * bit gets set nevertheless.  As a result the I/O unit expects an EOI
+	 * message but it will never arrive and further interrupts are blocked
+	 * from the source.  The exact reason is so far unknown, but the
+	 * phenomenon was observed when two consecutive interrupt requests
+	 * from a given source get delivered to the same CPU and the source is
+	 * temporarily disabled in between.
+	 *
+	 * A workaround is to simulate an EOI message manually.  We achieve it
+	 * by setting the trigger mode to edge and then to level when the edge
+	 * trigger mode gets detected in the TMR of a local APIC for a
+	 * level-triggered interrupt.  We mask the source for the time of the
+	 * operation to prevent an edge-triggered interrupt escaping meanwhile.
+	 * The idea is from Manfred Spraul.  --macro
+	 */
 	cfg = desc->chip_data;
 	i = cfg->vector;
-
 	v = apic_read(APIC_TMR + ((i & ~0x1f) >> 1));
-#endif
 
 	/*
 	 * We must acknowledge the irq before we move it or the acknowledge will
@@ -2593,7 +2585,7 @@ static void ack_apic_level(unsigned int irq)
 		unmask_IO_APIC_irq_desc(desc);
 	}
 
-#ifdef CONFIG_X86_32
+	/* Tail end of version 0x11 I/O APIC bug workaround */
 	if (!(v & (1 << (i & 0x1f)))) {
 		atomic_inc(&irq_mis_count);
 		spin_lock(&ioapic_lock);
@@ -2601,7 +2593,6 @@ static void ack_apic_level(unsigned int irq)
 		__unmask_and_level_IO_APIC_irq(cfg);
 		spin_unlock(&ioapic_lock);
 	}
-#endif
 }
 
 #ifdef CONFIG_INTR_REMAP
-- 
cgit v1.2.3


From 83c21bedf63ce92a2dd82ae2c7a96179b0aa4372 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Mon, 8 Jun 2009 03:13:04 -0700
Subject: x86/ioapic.c: remove redundant declaration of irq_pin_list

The structure is defined immediately below, so there's no need
to forward declare it.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/kernel/apic/io_apic.c | 2 --
 1 file changed, 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 1a341444258..ec52e0c045c 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -116,8 +116,6 @@ static int __init parse_noapic(char *str)
 }
 early_param("noapic", parse_noapic);
 
-struct irq_pin_list;
-
 /*
  * This is performance-critical, we want to do it O(1)
  *
-- 
cgit v1.2.3


From 8e13d697febc1ba17e70ed88789255c8bc25aa41 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Mon, 8 Jun 2009 03:14:59 -0700
Subject: x86/ioapic.c: move lost comment to what seems like appropriate place

The comment got separated from its subject, so move it to what
appears to be the right place, and update to describe the current
structure.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/kernel/apic/io_apic.c | 12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index ec52e0c045c..a097a773bc7 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -116,13 +116,6 @@ static int __init parse_noapic(char *str)
 }
 early_param("noapic", parse_noapic);
 
-/*
- * This is performance-critical, we want to do it O(1)
- *
- * the indexing order of this array favors 1:1 mappings
- * between pins and IRQs.
- */
-
 struct irq_pin_list {
 	int apic, pin;
 	struct irq_pin_list *next;
@@ -137,6 +130,11 @@ static struct irq_pin_list *get_one_free_irq_2_pin(int node)
 	return pin;
 }
 
+/*
+ * This is performance-critical, we want to do it O(1)
+ *
+ * Most irqs are mapped 1:1 with pins.
+ */
 struct irq_cfg {
 	struct irq_pin_list *irq_2_pin;
 	cpumask_var_t domain;
-- 
cgit v1.2.3


From d8c52063ed85dda61b70bc05b90711478db5dc17 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Mon, 8 Jun 2009 03:17:58 -0700
Subject: x86/ioapic.c: convert io_apic_level_ack_pending loop to normal for()
 loop

Convert the unconventional loop in io_apic_level_ack_pending() to
a conventional for() loop.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/kernel/apic/io_apic.c | 8 +-------
 1 file changed, 1 insertion(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index a097a773bc7..0d0401802d4 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -410,13 +410,10 @@ static bool io_apic_level_ack_pending(struct irq_cfg *cfg)
 	unsigned long flags;
 
 	spin_lock_irqsave(&ioapic_lock, flags);
-	entry = cfg->irq_2_pin;
-	for (;;) {
+	for (entry = cfg->irq_2_pin; entry != NULL; entry = entry->next) {
 		unsigned int reg;
 		int pin;
 
-		if (!entry)
-			break;
 		pin = entry->pin;
 		reg = io_apic_read(entry->apic, 0x10 + pin*2);
 		/* Is the remote IRR bit set? */
@@ -424,9 +421,6 @@ static bool io_apic_level_ack_pending(struct irq_cfg *cfg)
 			spin_unlock_irqrestore(&ioapic_lock, flags);
 			return true;
 		}
-		if (!entry->next)
-			break;
-		entry = entry->next;
 	}
 	spin_unlock_irqrestore(&ioapic_lock, flags);
 
-- 
cgit v1.2.3


From 875e68ec32fc5495f3edf987aaae1c52306184b7 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Mon, 8 Jun 2009 03:24:11 -0700
Subject: x86/ioapic.c: simplify add_pin_to_irq_node()

Rather than duplicating the same alloc/init code twice, restructure
the function to look for duplicates and then add an entry
if none is found.

This function is not performance critical; all but one of its callers
are __init functions, and the non-__init caller is for PCI device setup.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/kernel/apic/io_apic.c | 28 ++++++++--------------------
 1 file changed, 8 insertions(+), 20 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 0d0401802d4..d9e8f19088d 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -490,34 +490,22 @@ static void ioapic_mask_entry(int apic, int pin)
  */
 static void add_pin_to_irq_node(struct irq_cfg *cfg, int node, int apic, int pin)
 {
-	struct irq_pin_list *entry;
+	struct irq_pin_list **entryp, *entry;
 
-	entry = cfg->irq_2_pin;
-	if (!entry) {
-		entry = get_one_free_irq_2_pin(node);
-		if (!entry) {
-			printk(KERN_ERR "can not alloc irq_2_pin to add %d - %d\n",
-					apic, pin);
-			return;
-		}
-		cfg->irq_2_pin = entry;
-		entry->apic = apic;
-		entry->pin = pin;
-		return;
-	}
-
-	while (entry->next) {
+	for (entryp = &cfg->irq_2_pin;
+	     *entryp != NULL;
+	     entryp = &(*entryp)->next) {
+		entry = *entryp;
 		/* not again, please */
 		if (entry->apic == apic && entry->pin == pin)
 			return;
-
-		entry = entry->next;
 	}
 
-	entry->next = get_one_free_irq_2_pin(node);
-	entry = entry->next;
+	entry = get_one_free_irq_2_pin(node);
 	entry->apic = apic;
 	entry->pin = pin;
+
+	*entryp = entry;
 }
 
 /*
-- 
cgit v1.2.3


From 535b64291a9d1ff8bc54642494a5fce27e1e1170 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Mon, 8 Jun 2009 03:29:26 -0700
Subject: x86/ioapic.c: convert replace_pin_at_irq_node to conventional for()
 loop

Use a conventional for() loop in replace_pin_at_irq_node().

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/kernel/apic/io_apic.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index d9e8f19088d..9386976b675 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -515,10 +515,10 @@ static void __init replace_pin_at_irq_node(struct irq_cfg *cfg, int node,
 				      int oldapic, int oldpin,
 				      int newapic, int newpin)
 {
-	struct irq_pin_list *entry = cfg->irq_2_pin;
+	struct irq_pin_list *entry;
 	int replaced = 0;
 
-	while (entry) {
+	for (entry = cfg->irq_2_pin; entry != NULL; entry = entry->next) {
 		if (entry->apic == oldapic && entry->pin == oldpin) {
 			entry->apic = newapic;
 			entry->pin = newpin;
@@ -526,7 +526,6 @@ static void __init replace_pin_at_irq_node(struct irq_cfg *cfg, int node,
 			/* every one is different, right? */
 			break;
 		}
-		entry = entry->next;
 	}
 
 	/* why? call replace before add? */
-- 
cgit v1.2.3


From 4eea6fff612f54380dd642b045bf03ac0613fe3e Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Mon, 8 Jun 2009 03:32:15 -0700
Subject: x86/ioapic.c: clean up replace_pin_at_irq_node logic and comments

There's no need for a control variable in replace_pin_at_irq_node();
it can just return if it finds the old apic/pin to replace.

If the loop terminates, then it didn't find the old apic/pin, so it can
add the new ones.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/kernel/apic/io_apic.c | 13 +++++--------
 1 file changed, 5 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 9386976b675..8245e62ed93 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -512,25 +512,22 @@ static void add_pin_to_irq_node(struct irq_cfg *cfg, int node, int apic, int pin
  * Reroute an IRQ to a different pin.
  */
 static void __init replace_pin_at_irq_node(struct irq_cfg *cfg, int node,
-				      int oldapic, int oldpin,
-				      int newapic, int newpin)
+					   int oldapic, int oldpin,
+					   int newapic, int newpin)
 {
 	struct irq_pin_list *entry;
-	int replaced = 0;
 
 	for (entry = cfg->irq_2_pin; entry != NULL; entry = entry->next) {
 		if (entry->apic == oldapic && entry->pin == oldpin) {
 			entry->apic = newapic;
 			entry->pin = newpin;
-			replaced = 1;
 			/* every one is different, right? */
-			break;
+			return;
 		}
 	}
 
-	/* why? call replace before add? */
-	if (!replaced)
-		add_pin_to_irq_node(cfg, node, newapic, newpin);
+	/* old apic/pin didn't exist, so just add new ones */
+	add_pin_to_irq_node(cfg, node, newapic, newpin);
 }
 
 static void io_apic_modify_irq(struct irq_cfg *cfg,
-- 
cgit v1.2.3


From 638f2f8c52a92c15ebda9e50d84c1ab56fc42e42 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Mon, 8 Jun 2009 03:37:52 -0700
Subject: x86/ioapic.c: convert __target_IO_APIC_irq to conventional for() loop

Use a normal for() loop in __target_IO_APIC_irq().

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/kernel/apic/io_apic.c | 9 +--------
 1 file changed, 1 insertion(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 8245e62ed93..17883cd8259 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -2236,13 +2236,9 @@ static void __target_IO_APIC_irq(unsigned int irq, unsigned int dest, struct irq
 	struct irq_pin_list *entry;
 	u8 vector = cfg->vector;
 
-	entry = cfg->irq_2_pin;
-	for (;;) {
+	for (entry = cfg->irq_2_pin; entry != NULL; entry = entry->next) {
 		unsigned int reg;
 
-		if (!entry)
-			break;
-
 		apic = entry->apic;
 		pin = entry->pin;
 		/*
@@ -2255,9 +2251,6 @@ static void __target_IO_APIC_irq(unsigned int irq, unsigned int dest, struct irq
 		reg &= ~IO_APIC_REDIR_VECTOR_MASK;
 		reg |= vector;
 		io_apic_modify(apic, 0x10 + pin*2, reg);
-		if (!entry->next)
-			break;
-		entry = entry->next;
 	}
 }
 
-- 
cgit v1.2.3


From e25371d60cb06a44d7a32d7966ab9bfbeacb9390 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Mon, 8 Jun 2009 03:49:01 -0700
Subject: x86/ioapic.c: unify ioapic_retrigger_irq()

The 32 and 64-bit versions of ioapic_retrigger_irq() are identical
except the 64-bit one takes vector_lock.  vector_lock is defined and
used on 32-bit too, so just use a common ioapic_retrigger_irq().

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/kernel/apic/io_apic.c | 9 ---------
 1 file changed, 9 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 17883cd8259..cf51b0b58c5 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -2178,7 +2178,6 @@ static unsigned int startup_ioapic_irq(unsigned int irq)
 	return was_pending;
 }
 
-#ifdef CONFIG_X86_64
 static int ioapic_retrigger_irq(unsigned int irq)
 {
 
@@ -2191,14 +2190,6 @@ static int ioapic_retrigger_irq(unsigned int irq)
 
 	return 1;
 }
-#else
-static int ioapic_retrigger_irq(unsigned int irq)
-{
-	apic->send_IPI_self(irq_cfg(irq)->vector);
-
-	return 1;
-}
-#endif
 
 /*
  * Level and edge triggered IO-APIC interrupts need different handling,
-- 
cgit v1.2.3


From 872fb6dd6b07986417964e089074e7acfd025f4c Mon Sep 17 00:00:00 2001
From: Fenghua Yu <fenghua.yu@intel.com>
Date: Mon, 13 Jul 2009 13:09:43 -0700
Subject: ia64: Fix setup_per_cpu_areas() compilation error

Fix ia64 build setup_per_cpu_areas() redifinition issue in UP
configuration.  When compiling ia64 kernel in UP configuration, the
following compilation errors are reported:

arch/ia64/kernel/setup.c:860: error: redefinition of 'setup_per_cpu_areas'
include/linux/percpu.h:185: error: previous definition of 'setup_per_cpu_areas' was here

The patch fixes the issue in arch/ia64/kernel/setup.c

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/ia64/kernel/setup.c | 6 ++++++
 1 file changed, 6 insertions(+)

(limited to 'arch')

diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c
index 1b23ec126b6..1de86c96801 100644
--- a/arch/ia64/kernel/setup.c
+++ b/arch/ia64/kernel/setup.c
@@ -855,11 +855,17 @@ identify_cpu (struct cpuinfo_ia64 *c)
 	c->unimpl_pa_mask = ~((1L<<63) | ((1L << phys_addr_size) - 1));
 }
 
+/*
+ * In UP configuration, setup_per_cpu_areas() is defined in
+ * include/linux/percpu.h
+ */
+#ifdef CONFIG_SMP
 void __init
 setup_per_cpu_areas (void)
 {
 	/* start_kernel() requires this... */
 }
+#endif
 
 /*
  * Do the following calculations:
-- 
cgit v1.2.3


From 1dacc76d0014a034b8aca14237c127d7c19d7726 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes@sipsolutions.net>
Date: Wed, 1 Jul 2009 11:26:02 +0000
Subject: net/compat/wext: send different messages to compat tasks

Wireless extensions have the unfortunate problem that events
are multicast netlink messages, and are not independent of
pointer size. Thus, currently 32-bit tasks on 64-bit platforms
cannot properly receive events and fail with all kinds of
strange problems, for instance wpa_supplicant never notices
disassociations, due to the way the 64-bit event looks (to a
32-bit process), the fact that the address is all zeroes is
lost, it thinks instead it is 00:00:00:00:01:00.

The same problem existed with the ioctls, until David Miller
fixed those some time ago in an heroic effort.

A different problem caused by this is that we cannot send the
ASSOCREQIE/ASSOCRESPIE events because sending them causes a
32-bit wpa_supplicant on a 64-bit system to overwrite its
internal information, which is worse than it not getting the
information at all -- so we currently resort to sending a
custom string event that it then parses. This, however, has a
severe size limitation we are frequently hitting with modern
access points; this limitation would can be lifted after this
patch by sending the correct binary, not custom, event.

A similar problem apparently happens for some other netlink
users on x86_64 with 32-bit tasks due to the alignment for
64-bit quantities.

In order to fix these problems, I have implemented a way to
send compat messages to tasks. When sending an event, we send
the non-compat event data together with a compat event data in
skb_shinfo(main_skb)->frag_list. Then, when the event is read
from the socket, the netlink code makes sure to pass out only
the skb that is compatible with the task. This approach was
suggested by David Miller, my original approach required
always sending two skbs but that had various small problems.

To determine whether compat is needed or not, I have used the
MSG_CMSG_COMPAT flag, and adjusted the call path for recv and
recvfrom to include it, even if those calls do not have a cmsg
parameter.

I have not solved one small part of the problem, and I don't
think it is necessary to: if a 32-bit application uses read()
rather than any form of recvmsg() it will still get the wrong
(64-bit) event. However, neither do applications actually do
this, nor would it be a regression.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/mips/kernel/scall64-n32.S | 2 +-
 arch/mips/kernel/scall64-o32.S | 4 ++--
 arch/sparc/kernel/sys32.S      | 2 +-
 3 files changed, 4 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S
index 15874f9812c..7c4a94f4370 100644
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@@ -164,7 +164,7 @@ EXPORT(sysn32_call_table)
 	PTR	sys_connect
 	PTR	sys_accept
 	PTR	sys_sendto
-	PTR	sys_recvfrom
+	PTR	compat_sys_recvfrom
 	PTR	compat_sys_sendmsg		/* 6045 */
 	PTR	compat_sys_recvmsg
 	PTR	sys_shutdown
diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S
index 781e0f1e953..821fc978673 100644
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@@ -378,8 +378,8 @@ sys_call_table:
 	PTR	sys_getsockname
 	PTR	sys_getsockopt
 	PTR	sys_listen
-	PTR	sys_recv			/* 4175 */
-	PTR	sys_recvfrom
+	PTR	compat_sys_recv			/* 4175 */
+	PTR	compat_sys_recvfrom
 	PTR	compat_sys_recvmsg
 	PTR	sys_send
 	PTR	compat_sys_sendmsg
diff --git a/arch/sparc/kernel/sys32.S b/arch/sparc/kernel/sys32.S
index f061c4dda9e..3762f6c7894 100644
--- a/arch/sparc/kernel/sys32.S
+++ b/arch/sparc/kernel/sys32.S
@@ -121,7 +121,7 @@ SIGN2(sys32_syslog, sys_syslog, %o0, %o2)
 SIGN1(sys32_umask, sys_umask, %o0)
 SIGN3(sys32_tgkill, sys_tgkill, %o0, %o1, %o2)
 SIGN1(sys32_sendto, sys_sendto, %o0)
-SIGN1(sys32_recvfrom, sys_recvfrom, %o0)
+SIGN1(sys32_recvfrom, compat_sys_recvfrom, %o0)
 SIGN3(sys32_socket, sys_socket, %o0, %o1, %o2)
 SIGN2(sys32_connect, sys_connect, %o0, %o2)
 SIGN2(sys32_bind, sys_bind, %o0, %o2)
-- 
cgit v1.2.3


From 2a549c364aa11e658ae14b71861d25474e5808cf Mon Sep 17 00:00:00 2001
From: Sachin Sant <sachinp@in.ibm.com>
Date: Thu, 16 Jul 2009 19:58:42 +0800
Subject: crypto: s390 - Fix sha build failure

Use struct s390_sha_ctx instead of sha1/sha256_state struct to fix
s390 crypto build break.

Signed-off-by: Sachin Sant <sachinp@in.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
---
 arch/s390/crypto/sha1_s390.c   | 2 +-
 arch/s390/crypto/sha256_s390.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/crypto/sha1_s390.c b/arch/s390/crypto/sha1_s390.c
index 2c5ec7969e3..4a943789c20 100644
--- a/arch/s390/crypto/sha1_s390.c
+++ b/arch/s390/crypto/sha1_s390.c
@@ -59,7 +59,7 @@ static int sha1_export(struct shash_desc *desc, void *out)
 
 static int sha1_import(struct shash_desc *desc, const u8 *in)
 {
-	struct sha1_state *sctx = shash_desc_ctx(desc);
+	struct s390_sha_ctx *sctx = shash_desc_ctx(desc);
 	struct sha1_state *ictx = in;
 
 	sctx->count = ictx->count;
diff --git a/arch/s390/crypto/sha256_s390.c b/arch/s390/crypto/sha256_s390.c
index 943a669452c..2bab5197789 100644
--- a/arch/s390/crypto/sha256_s390.c
+++ b/arch/s390/crypto/sha256_s390.c
@@ -55,7 +55,7 @@ static int sha256_export(struct shash_desc *desc, void *out)
 
 static int sha256_import(struct shash_desc *desc, const u8 *in)
 {
-	struct sha256_state *sctx = shash_desc_ctx(desc);
+	struct s390_sha_ctx *sctx = shash_desc_ctx(desc);
 	struct sha256_state *ictx = in;
 
 	sctx->count = ictx->count;
-- 
cgit v1.2.3


From 5b1c3c858cff4da95b9f7091eef424e706784cab Mon Sep 17 00:00:00 2001
From: Hartley Sweeten <hartleys@visionengravers.com>
Date: Mon, 13 Jul 2009 19:50:10 +0100
Subject: [ARM] 5600/1: ep93xx: core.c remove cast when copying dev_addr

The MAC address for the ep93xx ethernet driver can be optionally
copied from registers in the controller when booting.  Due to
[ARM] 5573/1: ep93xx: ensure typesafe io, the cast for the source
address is no longer needed.

EP93XX_ETHERNET_BASE is typed as a (void __iomem __force *) so
memcpy_fromio() needs to be used instead of memcpy().

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ep93xx/core.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 68ac0545f57..4c38941a92c 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -541,10 +541,8 @@ static struct platform_device ep93xx_eth_device = {
 
 void __init ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr)
 {
-	if (copy_addr) {
-		memcpy(data->dev_addr,
-			(void *)(EP93XX_ETHERNET_BASE + 0x50), 6);
-	}
+	if (copy_addr)
+		memcpy_fromio(data->dev_addr, EP93XX_ETHERNET_BASE + 0x50, 6);
 
 	ep93xx_eth_data = *data;
 	platform_device_register(&ep93xx_eth_device);
-- 
cgit v1.2.3


From 595c050d89e91e91cca3845e48b01042677bd19e Mon Sep 17 00:00:00 2001
From: Ryan Mallon <ryan@bluewatersys.com>
Date: Wed, 15 Jul 2009 21:31:46 +0100
Subject: [ARM] 5605/1: Fix ep93xx gpio.c headers

Fix a number of build errors in ep93xx gpio.c due to to missing irq.h

Signed-off-by: Ryan Mallon <ryan@bluewatersys.com>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ep93xx/gpio.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/arm/mach-ep93xx/gpio.c b/arch/arm/mach-ep93xx/gpio.c
index 2d83d69e2ee..1ea8871e03a 100644
--- a/arch/arm/mach-ep93xx/gpio.c
+++ b/arch/arm/mach-ep93xx/gpio.c
@@ -18,6 +18,7 @@
 #include <linux/seq_file.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
+#include <linux/irq.h>
 
 #include <mach/hardware.h>
 
-- 
cgit v1.2.3


From fbeeea5386ab213bd55b223f3a75c823fccd6df5 Mon Sep 17 00:00:00 2001
From: Ryan Mallon <ryan@bluewatersys.com>
Date: Wed, 15 Jul 2009 21:51:59 +0100
Subject: [ARM] 5607/1: ep93xx: Use __iomem pointer on syscon write function

Change the reg argument of the ep93xx_syscon_swlocked_write function
to be an __iomem pointer. Fixes a number of build warnings.

Signed-off-by: Ryan Mallon <ryan@bluewatersys.com>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ep93xx/core.c                  | 2 +-
 arch/arm/mach-ep93xx/include/mach/platform.h | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 4c38941a92c..b390c35f8bc 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -377,7 +377,7 @@ void __init ep93xx_init_irq(void)
  */
 static DEFINE_SPINLOCK(syscon_swlock);
 
-void ep93xx_syscon_swlocked_write(unsigned int val, unsigned int reg)
+void ep93xx_syscon_swlocked_write(unsigned int val, void __iomem *reg)
 {
 	unsigned long flags;
 
diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h
index fb5e59a3ea0..0af0a3ba704 100644
--- a/arch/arm/mach-ep93xx/include/mach/platform.h
+++ b/arch/arm/mach-ep93xx/include/mach/platform.h
@@ -17,7 +17,7 @@ void ep93xx_init_irq(void);
 void ep93xx_init_time(unsigned long);
 
 /* EP93xx System Controller software locked register write */
-void ep93xx_syscon_swlocked_write(unsigned int val, unsigned int reg);
+void ep93xx_syscon_swlocked_write(unsigned int val, void __iomem *reg);
 void ep93xx_devcfg_set_clear(unsigned int set_bits, unsigned int clear_bits);
 
 static inline void ep93xx_devcfg_set_bits(unsigned int bits)
-- 
cgit v1.2.3


From 5d43f11bcf854d83b24c7ca6bb15d9ab9130159f Mon Sep 17 00:00:00 2001
From: Hartley Sweeten <hartleys@visionengravers.com>
Date: Thu, 16 Jul 2009 22:46:31 +0100
Subject: [ARM] 5609/1: ep93xx: add register defines for keypad support

Add missing register defines for ep93xx keypad clock support.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h | 5 +++++
 1 file changed, 5 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
index 087d22b8f35..a11ae779baa 100644
--- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
+++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
@@ -206,6 +206,11 @@
 #define EP93XX_SYSCON_DEVCFG_ADCPD	(1<<2)
 #define EP93XX_SYSCON_DEVCFG_KEYS	(1<<1)
 #define EP93XX_SYSCON_DEVCFG_SHENA	(1<<0)
+#define EP93XX_SYSCON_KEYTCHCLKDIV	EP93XX_SYSCON_REG(0x90)
+#define EP93XX_SYSCON_KEYTCHCLKDIV_TSEN	(1<<31)
+#define EP93XX_SYSCON_KEYTCHCLKDIV_ADIV	(1<<16)
+#define EP93XX_SYSCON_KEYTCHCLKDIV_KEN	(1<<15)
+#define EP93XX_SYSCON_KEYTCHCLKDIV_KDIV	(1<<0)
 #define EP93XX_SYSCON_SWLOCK		EP93XX_SYSCON_REG(0xc0)
 
 #define EP93XX_WATCHDOG_BASE		EP93XX_APB_IOMEM(0x00140000)
-- 
cgit v1.2.3


From d2c241955095b129459985a8c02d85b70984b945 Mon Sep 17 00:00:00 2001
From: wanzongshun <mcuos.com@gmail.com>
Date: Tue, 14 Jul 2009 15:09:54 +0100
Subject: [ARM] 5601/1: Add HAVE_CLK depends on for w90p910 platform

Add HAVE_CLK depends on for w90p910 platform.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/Kconfig | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index aef63c8e3d2..c3fed1ee730 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -493,6 +493,7 @@ config ARCH_W90X900
 	select CPU_ARM926T
 	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_GPIO
+	select HAVE_CLK
 	select COMMON_CLKDEV
 	help
 		Support for Nuvoton (Winbond logic dept.) ARM9 processor,You
-- 
cgit v1.2.3


From db58e90fdbe9d12b431ae8d8e856961ce75d74f0 Mon Sep 17 00:00:00 2001
From: wanzongshun <mcuos.com@gmail.com>
Date: Tue, 14 Jul 2009 15:10:43 +0100
Subject: [ARM] 5602/1: Add sub clock api for w90p910 platform

Add sub clock api for w90p910 platform.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-w90x900/clock.c   | 18 ++++++++++++++++++
 arch/arm/mach-w90x900/clock.h   |  8 ++++++++
 arch/arm/mach-w90x900/w90p910.c |  6 ++++++
 3 files changed, 32 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-w90x900/clock.c b/arch/arm/mach-w90x900/clock.c
index f420613cd39..49cf1fbc14e 100644
--- a/arch/arm/mach-w90x900/clock.c
+++ b/arch/arm/mach-w90x900/clock.c
@@ -25,6 +25,8 @@
 
 #include "clock.h"
 
+#define SUBCLK 0x24
+
 static DEFINE_SPINLOCK(clocks_lock);
 
 int clk_enable(struct clk *clk)
@@ -68,6 +70,22 @@ void w90x900_clk_enable(struct clk *clk, int enable)
 	__raw_writel(clken, W90X900_VA_CLKPWR);
 }
 
+void w90x900_subclk_enable(struct clk *clk, int enable)
+{
+	unsigned int clocks = clk->cken;
+	unsigned long clken;
+
+	clken = __raw_readl(W90X900_VA_CLKPWR + SUBCLK);
+
+	if (enable)
+		clken |= clocks;
+	else
+		clken &= ~clocks;
+
+	__raw_writel(clken, W90X900_VA_CLKPWR + SUBCLK);
+}
+
+
 void clks_register(struct clk_lookup *clks, size_t num)
 {
 	int i;
diff --git a/arch/arm/mach-w90x900/clock.h b/arch/arm/mach-w90x900/clock.h
index 4f27bda76d5..d2f0e50a70b 100644
--- a/arch/arm/mach-w90x900/clock.h
+++ b/arch/arm/mach-w90x900/clock.h
@@ -13,6 +13,7 @@
 #include <asm/clkdev.h>
 
 void w90x900_clk_enable(struct clk *clk, int enable);
+void w90x900_subclk_enable(struct clk *clk, int enable);
 void clks_register(struct clk_lookup *clks, size_t num);
 
 struct clk {
@@ -27,6 +28,13 @@ struct clk clk_##_name = {				\
 		.cken	= (1 << _ctrlbit),		\
 	}
 
+#define DEFINE_SUBCLK(_name, _ctrlbit)			\
+struct clk clk_##_name = {				\
+		.enable	= w90x900_subclk_enable,	\
+		.cken	= (1 << _ctrlbit),		\
+	}
+
+
 #define DEF_CLKLOOK(_clk, _devname, _conname)		\
 	{						\
 		.clk		= _clk,			\
diff --git a/arch/arm/mach-w90x900/w90p910.c b/arch/arm/mach-w90x900/w90p910.c
index 1c97e4930b7..1bde69eac3d 100644
--- a/arch/arm/mach-w90x900/w90p910.c
+++ b/arch/arm/mach-w90x900/w90p910.c
@@ -57,9 +57,12 @@ static struct map_desc w90p910_iodesc[] __initdata = {
 static DEFINE_CLK(lcd, 0);
 static DEFINE_CLK(audio, 1);
 static DEFINE_CLK(fmi, 4);
+static DEFINE_SUBCLK(ms, 0);
+static DEFINE_SUBCLK(sd, 1);
 static DEFINE_CLK(dmac, 5);
 static DEFINE_CLK(atapi, 6);
 static DEFINE_CLK(emc, 7);
+static DEFINE_SUBCLK(rmii, 2);
 static DEFINE_CLK(usbd, 8);
 static DEFINE_CLK(usbh, 9);
 static DEFINE_CLK(g2d, 10);;
@@ -75,9 +78,12 @@ static struct clk_lookup w90p910_clkregs[] = {
 	DEF_CLKLOOK(&clk_lcd, "w90p910-lcd", NULL),
 	DEF_CLKLOOK(&clk_audio, "w90p910-audio", NULL),
 	DEF_CLKLOOK(&clk_fmi, "w90p910-fmi", NULL),
+	DEF_CLKLOOK(&clk_ms, "w90p910-fmi", "MS"),
+	DEF_CLKLOOK(&clk_sd, "w90p910-fmi", "SD"),
 	DEF_CLKLOOK(&clk_dmac, "w90p910-dmac", NULL),
 	DEF_CLKLOOK(&clk_atapi, "w90p910-atapi", NULL),
 	DEF_CLKLOOK(&clk_emc, "w90p910-emc", NULL),
+	DEF_CLKLOOK(&clk_rmii, "w90p910-emc", "RMII"),
 	DEF_CLKLOOK(&clk_usbd, "w90p910-usbd", NULL),
 	DEF_CLKLOOK(&clk_usbh, "w90p910-usbh", NULL),
 	DEF_CLKLOOK(&clk_g2d, "w90p910-g2d", NULL),
-- 
cgit v1.2.3


From 0abe1856bdb68ef699c00949cf9f81fbec98d499 Mon Sep 17 00:00:00 2001
From: wanzongshun <mcuos.com@gmail.com>
Date: Tue, 14 Jul 2009 15:12:26 +0100
Subject: [ARM] 5604/1: Add keypad multi-function pin api for w90p910 platform

Add keypad multi-function pin api for w90p910 platform.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-w90x900/mfp-w90p910.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-w90x900/mfp-w90p910.c b/arch/arm/mach-w90x900/mfp-w90p910.c
index a3520fefb5e..8aec34b044c 100644
--- a/arch/arm/mach-w90x900/mfp-w90p910.c
+++ b/arch/arm/mach-w90x900/mfp-w90p910.c
@@ -90,7 +90,7 @@ void mfp_set_groupc(struct device *dev)
 }
 EXPORT_SYMBOL(mfp_set_groupc);
 
-void mfp_set_groupi(struct device *dev, int gpio)
+void mfp_set_groupi(struct device *dev)
 {
 	unsigned long mfpen;
 	const char *dev_id;
@@ -103,10 +103,14 @@ void mfp_set_groupi(struct device *dev, int gpio)
 
 	mfpen = __raw_readl(REG_MFSEL);
 
+	mfpen &= ~GPSELEI1;/*default gpio16*/
+
 	if (strcmp(dev_id, "w90p910-wdog") == 0)
 		mfpen |= GPSELEI1;/*enable wdog*/
 		else if (strcmp(dev_id, "w90p910-atapi") == 0)
 			mfpen |= GPSELEI0;/*enable atapi*/
+			else if (strcmp(dev_id, "w90p910-keypad") == 0)
+				mfpen &= ~GPSELEI0;/*enable keypad*/
 
 	__raw_writel(mfpen, REG_MFSEL);
 
-- 
cgit v1.2.3


From c197cec5fae7968a7154ee999f0a1b07938d1528 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Sat, 18 Jul 2009 10:12:25 +0100
Subject: ARM: S3C: Update hwmon device definition and name

Change the hwmon device name to something more generic as this
should be functional for both the s3c24xx and s3c64xx archs.

Since it has yet to have a driver, it is pretty safe to change
as there are no extant users.

Also add the necessary entry in devs.h which seems to have been
missed  out at somepoint.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c/include/plat/devs.h | 2 ++
 arch/arm/plat-s3c24xx/devs.c          | 2 +-
 2 files changed, 3 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/plat-s3c/include/plat/devs.h b/arch/arm/plat-s3c/include/plat/devs.h
index 2e170827e0b..1989ca1bb2b 100644
--- a/arch/arm/plat-s3c/include/plat/devs.h
+++ b/arch/arm/plat-s3c/include/plat/devs.h
@@ -46,6 +46,8 @@ extern struct platform_device s3c_device_hsmmc2;
 extern struct platform_device s3c_device_spi0;
 extern struct platform_device s3c_device_spi1;
 
+extern struct platform_device s3c_device_hwmon;
+
 extern struct platform_device s3c_device_nand;
 
 extern struct platform_device s3c_device_usbgadget;
diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c
index 4eb378c89a3..3489019b537 100644
--- a/arch/arm/plat-s3c24xx/devs.c
+++ b/arch/arm/plat-s3c24xx/devs.c
@@ -348,7 +348,7 @@ struct platform_device s3c_device_adc = {
 /* HWMON */
 
 struct platform_device s3c_device_hwmon = {
-	.name		= "s3c24xx-hwmon",
+	.name		= "s3c-hwmon",
 	.id		= -1,
 	.dev.parent	= &s3c_device_adc.dev,
 };
-- 
cgit v1.2.3


From 885f9ebe7554628967b6e93b284dd3021e1bb280 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Sat, 18 Jul 2009 10:12:26 +0100
Subject: ARM: BAST: Add hwmon device information

Add platform device information for the ADC channels to be exported
via HWMON. This exports all the ADCs not being used for the touchscreen
interface.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2410/mach-bast.c | 32 ++++++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index ce3baba2cd7..06670bb89ca 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -45,6 +45,7 @@
 #include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 
+#include <plat/hwmon.h>
 #include <plat/nand.h>
 #include <plat/iic.h>
 #include <mach/fb.h>
@@ -547,7 +548,35 @@ static struct i2c_board_info bast_i2c_devs[] __initdata = {
 	},
 };
 
+static struct s3c_hwmon_pdata bast_hwmon_info = {
+	/* LCD contrast (0-6.6V) */
+	.in[0] = &(struct s3c_hwmon_chcfg) {
+		.name		= "lcd-contrast",
+		.mult		= 3300,
+		.div		= 512,
+	},
+	/* LED current feedback */
+	.in[1] = &(struct s3c_hwmon_chcfg) {
+		.name		= "led-feedback",
+		.mult		= 3300,
+		.div		= 1024,
+	},
+	/* LCD feedback (0-6.6V) */
+	.in[2] = &(struct s3c_hwmon_chcfg) {
+		.name		= "lcd-feedback",
+		.mult		= 3300,
+		.div		= 512,
+	},
+	/* Vcore (1.8-2.0V), Vref 3.3V  */
+	.in[3] = &(struct s3c_hwmon_chcfg) {
+		.name		= "vcore",
+		.mult		= 3300,
+		.div		= 1024,
+	},
+};
+
 /* Standard BAST devices */
+// cat /sys/devices/platform/s3c24xx-adc/s3c-hwmon/in_0
 
 static struct platform_device *bast_devices[] __initdata = {
 	&s3c_device_usb,
@@ -556,6 +585,8 @@ static struct platform_device *bast_devices[] __initdata = {
 	&s3c_device_i2c0,
  	&s3c_device_rtc,
 	&s3c_device_nand,
+	&s3c_device_adc,
+	&s3c_device_hwmon,
 	&bast_device_dm9k,
 	&bast_device_asix,
 	&bast_device_axpp,
@@ -588,6 +619,7 @@ static void __init bast_map_io(void)
 	s3c24xx_register_clocks(bast_clocks, ARRAY_SIZE(bast_clocks));
 
 	s3c_device_nand.dev.platform_data = &bast_nand_info;
+	s3c_device_hwmon.dev.platform_data = &bast_hwmon_info;
 
 	s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
 	s3c24xx_init_clocks(0);
-- 
cgit v1.2.3


From e170adcb406504b8acd35554c69830c11916be1f Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Sat, 18 Jul 2009 10:12:27 +0100
Subject: ARM: S3C: Add ADC synchronous read call.

To add HWMON support, we need a synchronous read() call that blocks
until completion. Add the client that is being service to the select
and convert callbacks to make the code easier.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c/include/plat/adc.h |  8 +++--
 arch/arm/plat-s3c24xx/adc.c          | 64 +++++++++++++++++++++++++++++-------
 2 files changed, 59 insertions(+), 13 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-s3c/include/plat/adc.h b/arch/arm/plat-s3c/include/plat/adc.h
index d847bd476b6..5f3b1cd53b9 100644
--- a/arch/arm/plat-s3c/include/plat/adc.h
+++ b/arch/arm/plat-s3c/include/plat/adc.h
@@ -19,10 +19,14 @@ struct s3c_adc_client;
 extern int s3c_adc_start(struct s3c_adc_client *client,
 			 unsigned int channel, unsigned int nr_samples);
 
+extern int s3c_adc_read(struct s3c_adc_client *client, unsigned int ch);
+
 extern struct s3c_adc_client *
 	s3c_adc_register(struct platform_device *pdev,
-			 void (*select)(unsigned selected),
-			 void (*conv)(unsigned d0, unsigned d1,
+			 void (*select)(struct s3c_adc_client *client,
+					unsigned selected),
+			 void (*conv)(struct s3c_adc_client *client,
+				      unsigned d0, unsigned d1,
 				      unsigned *samples_left),
 			 unsigned int is_ts);
 
diff --git a/arch/arm/plat-s3c24xx/adc.c b/arch/arm/plat-s3c24xx/adc.c
index ee1baf11ad9..11117a7ba91 100644
--- a/arch/arm/plat-s3c24xx/adc.c
+++ b/arch/arm/plat-s3c24xx/adc.c
@@ -39,13 +39,16 @@
 struct s3c_adc_client {
 	struct platform_device	*pdev;
 	struct list_head	 pend;
+	wait_queue_head_t	*wait;
 
 	unsigned int		 nr_samples;
+	int			 result;
 	unsigned char		 is_ts;
 	unsigned char		 channel;
 
-	void	(*select_cb)(unsigned selected);
-	void	(*convert_cb)(unsigned val1, unsigned val2,
+	void	(*select_cb)(struct s3c_adc_client *c, unsigned selected);
+	void	(*convert_cb)(struct s3c_adc_client *c,
+			      unsigned val1, unsigned val2,
 			      unsigned *samples_left);
 };
 
@@ -81,7 +84,7 @@ static inline void s3c_adc_select(struct adc_device *adc,
 {
 	unsigned con = readl(adc->regs + S3C2410_ADCCON);
 
-	client->select_cb(1);
+	client->select_cb(client, 1);
 
 	con &= ~S3C2410_ADCCON_MUXMASK;
 	con &= ~S3C2410_ADCCON_STDBM;
@@ -153,25 +156,61 @@ int s3c_adc_start(struct s3c_adc_client *client,
 }
 EXPORT_SYMBOL_GPL(s3c_adc_start);
 
-static void s3c_adc_default_select(unsigned select)
+static void s3c_convert_done(struct s3c_adc_client *client,
+			     unsigned v, unsigned u, unsigned *left)
+{
+	client->result = v;
+	wake_up(client->wait);
+}
+
+int s3c_adc_read(struct s3c_adc_client *client, unsigned int ch)
+{
+	DECLARE_WAIT_QUEUE_HEAD_ONSTACK(wake);
+	int ret;
+
+	client->convert_cb = s3c_convert_done;
+	client->wait = &wake;
+	client->result = -1;
+
+	ret = s3c_adc_start(client, ch, 1);
+	if (ret < 0)
+		goto err;
+
+	ret = wait_event_timeout(wake, client->result >= 0, HZ / 2);
+	if (client->result < 0) {
+		ret = -ETIMEDOUT;
+		goto err;
+	}
+
+	client->convert_cb = NULL;
+	return client->result;
+
+err:
+	return ret;
+}
+EXPORT_SYMBOL_GPL(s3c_adc_convert);
+
+static void s3c_adc_default_select(struct s3c_adc_client *client,
+				   unsigned select)
 {
 }
 
 struct s3c_adc_client *s3c_adc_register(struct platform_device *pdev,
-					void (*select)(unsigned int selected),
-					void (*conv)(unsigned d0, unsigned d1,
+					void (*select)(struct s3c_adc_client *client,
+						       unsigned int selected),
+					void (*conv)(struct s3c_adc_client *client,
+						     unsigned d0, unsigned d1,
 						     unsigned *samples_left),
 					unsigned int is_ts)
 {
 	struct s3c_adc_client *client;
 
 	WARN_ON(!pdev);
-	WARN_ON(!conv);
 
 	if (!select)
 		select = s3c_adc_default_select;
 
-	if (!conv || !pdev)
+	if (!pdev)
 		return ERR_PTR(-EINVAL);
 
 	client = kzalloc(sizeof(struct s3c_adc_client), GFP_KERNEL);
@@ -230,16 +269,19 @@ static irqreturn_t s3c_adc_irq(int irq, void *pw)
 	adc_dbg(adc, "read %d: 0x%04x, 0x%04x\n", client->nr_samples, data0, data1);
 
 	client->nr_samples--;
-	(client->convert_cb)(data0 & 0x3ff, data1 & 0x3ff, &client->nr_samples);
+
+	if (client->convert_cb)
+		(client->convert_cb)(client, data0 & 0x3ff, data1 & 0x3ff,
+				     &client->nr_samples);
 
 	if (client->nr_samples > 0) {
 		/* fire another conversion for this */
 
-		client->select_cb(1);
+		client->select_cb(client, 1);
 		s3c_adc_convert(adc);
 	} else {
 		local_irq_save(flags);
-		(client->select_cb)(0);
+		(client->select_cb)(client, 0);
 		adc->cur = NULL;
 
 		s3c_adc_try(adc);
-- 
cgit v1.2.3


From bff78650a2b0ed42b8fb134b6a9b387e00027d67 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Sat, 18 Jul 2009 10:12:28 +0100
Subject: ARM: HWMON: S3C24XX series ADC driver

Add support for the ADC controller on the S3C series of processors to
drivers/hwmon for use with hardware monitoring systems.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c/include/plat/hwmon.h | 41 ++++++++++++++++++++++++++++++++++
 1 file changed, 41 insertions(+)
 create mode 100644 arch/arm/plat-s3c/include/plat/hwmon.h

(limited to 'arch')

diff --git a/arch/arm/plat-s3c/include/plat/hwmon.h b/arch/arm/plat-s3c/include/plat/hwmon.h
new file mode 100644
index 00000000000..1ba88ea0aa3
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/hwmon.h
@@ -0,0 +1,41 @@
+/* linux/arch/arm/plat-s3c/include/plat/hwmon.h
+ *
+ * Copyright 2005 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * S3C - HWMon interface for ADC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_ADC_HWMON_H
+#define __ASM_ARCH_ADC_HWMON_H __FILE__
+
+/**
+ * s3c_hwmon_chcfg - channel configuration
+ * @name: The name to give this channel.
+ * @mult: Multiply the ADC value read by this.
+ * @div: Divide the value from the ADC by this.
+ *
+ * The value read from the ADC is converted to a value that
+ * hwmon expects (mV) by result = (value_read * @mult) / @div.
+ */
+struct s3c_hwmon_chcfg {
+	const char	*name;
+	unsigned int	mult;
+	unsigned int	div;
+};
+
+/**
+ * s3c_hwmon_pdata - HWMON platform data
+ * @in: One configuration for each possible channel used.
+ */
+struct s3c_hwmon_pdata {
+	struct s3c_hwmon_chcfg	*in[8];
+};
+
+#endif /* __ASM_ARCH_ADC_HWMON_H */
+
-- 
cgit v1.2.3


From 254e0a6bff87ab8b22293c4bd1443507df698407 Mon Sep 17 00:00:00 2001
From: Akinobu Mita <akinobu.mita@gmail.com>
Date: Sun, 19 Jul 2009 00:08:54 +0900
Subject: x86: Use get_desc_base()

Use get_desc_base() to get the base address in desc_struct

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
LKML-Reference: <20090718150853.GA11294@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/doublefault_32.c | 4 +---
 arch/x86/kernel/step.c           | 9 ++++-----
 2 files changed, 5 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/doublefault_32.c b/arch/x86/kernel/doublefault_32.c
index b4f14c6c09d..37250fe490b 100644
--- a/arch/x86/kernel/doublefault_32.c
+++ b/arch/x86/kernel/doublefault_32.c
@@ -27,9 +27,7 @@ static void doublefault_fn(void)
 
 	if (ptr_ok(gdt)) {
 		gdt += GDT_ENTRY_TSS << 3;
-		tss = *(u16 *)(gdt+2);
-		tss += *(u8 *)(gdt+4) << 16;
-		tss += *(u8 *)(gdt+7) << 24;
+		tss = get_desc_base((struct desc_struct *)gdt);
 		printk(KERN_EMERG "double fault, tss at %08lx\n", tss);
 
 		if (ptr_ok(tss)) {
diff --git a/arch/x86/kernel/step.c b/arch/x86/kernel/step.c
index e8b9863ef8c..3149032ff10 100644
--- a/arch/x86/kernel/step.c
+++ b/arch/x86/kernel/step.c
@@ -4,6 +4,7 @@
 #include <linux/sched.h>
 #include <linux/mm.h>
 #include <linux/ptrace.h>
+#include <asm/desc.h>
 
 unsigned long convert_ip_to_linear(struct task_struct *child, struct pt_regs *regs)
 {
@@ -23,7 +24,7 @@ unsigned long convert_ip_to_linear(struct task_struct *child, struct pt_regs *re
 	 * and APM bios ones we just ignore here.
 	 */
 	if ((seg & SEGMENT_TI_MASK) == SEGMENT_LDT) {
-		u32 *desc;
+		struct desc_struct *desc;
 		unsigned long base;
 
 		seg &= ~7UL;
@@ -33,12 +34,10 @@ unsigned long convert_ip_to_linear(struct task_struct *child, struct pt_regs *re
 			addr = -1L; /* bogus selector, access would fault */
 		else {
 			desc = child->mm->context.ldt + seg;
-			base = ((desc[0] >> 16) |
-				((desc[1] & 0xff) << 16) |
-				(desc[1] & 0xff000000));
+			base = get_desc_base(desc);
 
 			/* 16-bit code segment? */
-			if (!((desc[1] >> 22) & 1))
+			if (!desc->d)
 				addr &= 0xffff;
 			addr += base;
 		}
-- 
cgit v1.2.3


From fde0312d01b60a3fd5dc56e69a9613defbbc7097 Mon Sep 17 00:00:00 2001
From: Akinobu Mita <akinobu.mita@gmail.com>
Date: Sun, 19 Jul 2009 00:09:56 +0900
Subject: x86: Remove unused patch_espfix_desc()

patch_espfix_desc() is not used after commit
dc4c2a0aed3b09f6e255bd5c3faa50fe6e0b2ded

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
LKML-Reference: <20090718150955.GB11294@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/traps.h |  4 +---
 arch/x86/kernel/traps.c      | 21 ---------------------
 2 files changed, 1 insertion(+), 24 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/traps.h b/arch/x86/include/asm/traps.h
index bfd74c032fc..4da91ad69e0 100644
--- a/arch/x86/include/asm/traps.h
+++ b/arch/x86/include/asm/traps.h
@@ -81,9 +81,7 @@ extern int panic_on_unrecovered_nmi;
 
 void math_error(void __user *);
 void math_emulate(struct math_emu_info *);
-#ifdef CONFIG_X86_32
-unsigned long patch_espfix_desc(unsigned long, unsigned long);
-#else
+#ifndef CONFIG_X86_32
 asmlinkage void smp_thermal_interrupt(void);
 asmlinkage void mce_threshold_interrupt(void);
 #endif
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index 5204332f475..23679411020 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -786,27 +786,6 @@ do_spurious_interrupt_bug(struct pt_regs *regs, long error_code)
 #endif
 }
 
-#ifdef CONFIG_X86_32
-unsigned long patch_espfix_desc(unsigned long uesp, unsigned long kesp)
-{
-	struct desc_struct *gdt = get_cpu_gdt_table(smp_processor_id());
-	unsigned long base = (kesp - uesp) & -THREAD_SIZE;
-	unsigned long new_kesp = kesp - base;
-	unsigned long lim_pages = (new_kesp | (THREAD_SIZE - 1)) >> PAGE_SHIFT;
-	__u64 desc = *(__u64 *)&gdt[GDT_ENTRY_ESPFIX_SS];
-
-	/* Set up base for espfix segment */
-	desc &= 0x00f0ff0000000000ULL;
-	desc |=	((((__u64)base) << 16) & 0x000000ffffff0000ULL) |
-		((((__u64)base) << 32) & 0xff00000000000000ULL) |
-		((((__u64)lim_pages) << 32) & 0x000f000000000000ULL) |
-		(lim_pages & 0xffff);
-	*(__u64 *)&gdt[GDT_ENTRY_ESPFIX_SS] = desc;
-
-	return new_kesp;
-}
-#endif
-
 asmlinkage void __attribute__((weak)) smp_thermal_interrupt(void)
 {
 }
-- 
cgit v1.2.3


From 57594742a2b545f8f114cda34f15650be8ae976d Mon Sep 17 00:00:00 2001
From: Akinobu Mita <akinobu.mita@gmail.com>
Date: Sun, 19 Jul 2009 00:11:06 +0900
Subject: x86: Introduce set_desc_base() and set_desc_limit()

Rename set_base()/set_limit to set_desc_base()/set_desc_limit()
and rewrite them in C. These are naturally introduced by the
idea of get_desc_base()/get_desc_limit().

The conversion actually found the bug in apm_32.c:
bad_bios_desc is written at run-time, but it is defined const
variable.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
LKML-Reference: <20090718151105.GC11294@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/desc.h           | 13 +++++++++++++
 arch/x86/include/asm/stackprotector.h |  4 +---
 arch/x86/include/asm/system.h         | 27 ---------------------------
 arch/x86/kernel/apm_32.c              | 18 +++++++++---------
 4 files changed, 23 insertions(+), 39 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/desc.h b/arch/x86/include/asm/desc.h
index c993e9e0fed..e8de2f6f5ca 100644
--- a/arch/x86/include/asm/desc.h
+++ b/arch/x86/include/asm/desc.h
@@ -291,11 +291,24 @@ static inline unsigned long get_desc_base(const struct desc_struct *desc)
 	return desc->base0 | ((desc->base1) << 16) | ((desc->base2) << 24);
 }
 
+static inline void set_desc_base(struct desc_struct *desc, unsigned long base)
+{
+	desc->base0 = base & 0xffff;
+	desc->base1 = (base >> 16) & 0xff;
+	desc->base2 = (base >> 24) & 0xff;
+}
+
 static inline unsigned long get_desc_limit(const struct desc_struct *desc)
 {
 	return desc->limit0 | (desc->limit << 16);
 }
 
+static inline void set_desc_limit(struct desc_struct *desc, unsigned long limit)
+{
+	desc->limit0 = limit & 0xffff;
+	desc->limit = (limit >> 16) & 0xf;
+}
+
 static inline void _set_gate(int gate, unsigned type, void *addr,
 			     unsigned dpl, unsigned ist, unsigned seg)
 {
diff --git a/arch/x86/include/asm/stackprotector.h b/arch/x86/include/asm/stackprotector.h
index c2d742c6e15..cdc5e0b126a 100644
--- a/arch/x86/include/asm/stackprotector.h
+++ b/arch/x86/include/asm/stackprotector.h
@@ -90,9 +90,7 @@ static inline void setup_stack_canary_segment(int cpu)
 	struct desc_struct desc;
 
 	desc = gdt_table[GDT_ENTRY_STACK_CANARY];
-	desc.base0 = canary & 0xffff;
-	desc.base1 = (canary >> 16) & 0xff;
-	desc.base2 = (canary >> 24) & 0xff;
+	set_desc_base(&desc, canary);
 	write_gdt_entry(gdt_table, GDT_ENTRY_STACK_CANARY, &desc, DESCTYPE_S);
 #endif
 }
diff --git a/arch/x86/include/asm/system.h b/arch/x86/include/asm/system.h
index 643c59b4bc6..75c49c782e2 100644
--- a/arch/x86/include/asm/system.h
+++ b/arch/x86/include/asm/system.h
@@ -150,33 +150,6 @@ do {									\
 #endif
 
 #ifdef __KERNEL__
-#define _set_base(addr, base) do { unsigned long __pr; \
-__asm__ __volatile__ ("movw %%dx,%1\n\t" \
-	"rorl $16,%%edx\n\t" \
-	"movb %%dl,%2\n\t" \
-	"movb %%dh,%3" \
-	:"=&d" (__pr) \
-	:"m" (*((addr)+2)), \
-	 "m" (*((addr)+4)), \
-	 "m" (*((addr)+7)), \
-	 "0" (base) \
-	); } while (0)
-
-#define _set_limit(addr, limit) do { unsigned long __lr; \
-__asm__ __volatile__ ("movw %%dx,%1\n\t" \
-	"rorl $16,%%edx\n\t" \
-	"movb %2,%%dh\n\t" \
-	"andb $0xf0,%%dh\n\t" \
-	"orb %%dh,%%dl\n\t" \
-	"movb %%dl,%2" \
-	:"=&d" (__lr) \
-	:"m" (*(addr)), \
-	 "m" (*((addr)+6)), \
-	 "0" (limit) \
-	); } while (0)
-
-#define set_base(ldt, base) _set_base(((char *)&(ldt)) , (base))
-#define set_limit(ldt, limit) _set_limit(((char *)&(ldt)) , ((limit)-1))
 
 extern void native_load_gs_index(unsigned);
 
diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c
index 79302e9a33a..b5e841bd60d 100644
--- a/arch/x86/kernel/apm_32.c
+++ b/arch/x86/kernel/apm_32.c
@@ -403,7 +403,7 @@ static DECLARE_WAIT_QUEUE_HEAD(apm_waitqueue);
 static DECLARE_WAIT_QUEUE_HEAD(apm_suspend_waitqueue);
 static struct apm_user *user_list;
 static DEFINE_SPINLOCK(user_list_lock);
-static const struct desc_struct	bad_bios_desc = { { { 0, 0x00409200 } } };
+static struct desc_struct bad_bios_desc = { { { 0, 0x00409200 } } };
 
 static const char driver_version[] = "1.16ac";	/* no spaces */
 
@@ -2337,8 +2337,8 @@ static int __init apm_init(void)
 	 * This is for buggy BIOS's that refer to (real mode) segment 0x40
 	 * even though they are called in protected mode.
 	 */
-	set_base(bad_bios_desc, __va((unsigned long)0x40 << 4));
-	_set_limit((char *)&bad_bios_desc, 4095 - (0x40 << 4));
+	set_desc_base(&bad_bios_desc, (unsigned long)__va(0x40UL << 4));
+	set_desc_limit(&bad_bios_desc, 4095 - (0x40 << 4));
 
 	/*
 	 * Set up the long jump entry point to the APM BIOS, which is called
@@ -2358,12 +2358,12 @@ static int __init apm_init(void)
 	 * code to that CPU.
 	 */
 	gdt = get_cpu_gdt_table(0);
-	set_base(gdt[APM_CS >> 3],
-		 __va((unsigned long)apm_info.bios.cseg << 4));
-	set_base(gdt[APM_CS_16 >> 3],
-		 __va((unsigned long)apm_info.bios.cseg_16 << 4));
-	set_base(gdt[APM_DS >> 3],
-		 __va((unsigned long)apm_info.bios.dseg << 4));
+	set_desc_base(&gdt[APM_CS >> 3],
+		 (unsigned long)__va((unsigned long)apm_info.bios.cseg << 4));
+	set_desc_base(&gdt[APM_CS_16 >> 3],
+		 (unsigned long)__va((unsigned long)apm_info.bios.cseg_16 << 4));
+	set_desc_base(&gdt[APM_DS >> 3],
+		 (unsigned long)__va((unsigned long)apm_info.bios.dseg << 4));
 
 	proc_create("apm", 0, NULL, &apm_file_ops);
 
-- 
cgit v1.2.3


From 4d4036e0e7299c6cbb2d2421b4b30b7a409ce61a Mon Sep 17 00:00:00 2001
From: Jason Yeh <jason.yeh@amd.com>
Date: Wed, 8 Jul 2009 13:49:38 +0200
Subject: oprofile: Implement performance counter multiplexing

The number of hardware counters is limited. The multiplexing feature
enables OProfile to gather more events than counters are provided by
the hardware. This is realized by switching between events at an user
specified time interval.

A new file (/dev/oprofile/time_slice) is added for the user to specify
the timer interval in ms. If the number of events to profile is higher
than the number of hardware counters available, the patch will
schedule a work queue that switches the event counter and re-writes
the different sets of values into it. The switching mechanism needs to
be implemented for each architecture to support multiplexing. This
patch only implements AMD CPU support, but multiplexing can be easily
extended for other models and architectures.

There are follow-on patches that rework parts of this patch.

Signed-off-by: Jason Yeh <jason.yeh@amd.com>
Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/Kconfig                      |  12 +++
 arch/x86/oprofile/nmi_int.c       | 162 ++++++++++++++++++++++++++++++++++++--
 arch/x86/oprofile/op_counter.h    |   2 +-
 arch/x86/oprofile/op_model_amd.c  | 110 ++++++++++++++++++++++----
 arch/x86/oprofile/op_model_p4.c   |   4 +
 arch/x86/oprofile/op_model_ppro.c |   2 +
 arch/x86/oprofile/op_x86_model.h  |   7 ++
 7 files changed, 279 insertions(+), 20 deletions(-)

(limited to 'arch')

diff --git a/arch/Kconfig b/arch/Kconfig
index 99193b16023..beea3ccebb5 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -30,6 +30,18 @@ config OPROFILE_IBS
 
 	  If unsure, say N.
 
+config OPROFILE_EVENT_MULTIPLEX
+	bool "OProfile multiplexing support (EXPERIMENTAL)"
+	default n
+	depends on OPROFILE && X86
+	help
+	  The number of hardware counters is limited. The multiplexing
+	  feature enables OProfile to gather more events than counters
+	  are provided by the hardware. This is realized by switching
+	  between events at an user specified time interval.
+
+	  If unsure, say N.
+
 config HAVE_OPROFILE
 	bool
 
diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index fca8dc94531..e54f6a0b35a 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -1,11 +1,14 @@
 /**
  * @file nmi_int.c
  *
- * @remark Copyright 2002-2008 OProfile authors
+ * @remark Copyright 2002-2009 OProfile authors
  * @remark Read the file COPYING
  *
  * @author John Levon <levon@movementarian.org>
  * @author Robert Richter <robert.richter@amd.com>
+ * @author Barry Kasindorf <barry.kasindorf@amd.com>
+ * @author Jason Yeh <jason.yeh@amd.com>
+ * @author Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
  */
 
 #include <linux/init.h>
@@ -24,6 +27,12 @@
 #include "op_counter.h"
 #include "op_x86_model.h"
 
+
+#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
+DEFINE_PER_CPU(int, switch_index);
+#endif
+
+
 static struct op_x86_model_spec const *model;
 static DEFINE_PER_CPU(struct op_msrs, cpu_msrs);
 static DEFINE_PER_CPU(unsigned long, saved_lvtpc);
@@ -31,6 +40,13 @@ static DEFINE_PER_CPU(unsigned long, saved_lvtpc);
 /* 0 == registered but off, 1 == registered and on */
 static int nmi_enabled = 0;
 
+
+#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
+extern atomic_t multiplex_counter;
+#endif
+
+struct op_counter_config counter_config[OP_MAX_COUNTER];
+
 /* common functions */
 
 u64 op_x86_get_ctrl(struct op_x86_model_spec const *model,
@@ -95,6 +111,11 @@ static void free_msrs(void)
 		per_cpu(cpu_msrs, i).counters = NULL;
 		kfree(per_cpu(cpu_msrs, i).controls);
 		per_cpu(cpu_msrs, i).controls = NULL;
+
+#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
+		kfree(per_cpu(cpu_msrs, i).multiplex);
+		per_cpu(cpu_msrs, i).multiplex = NULL;
+#endif
 	}
 }
 
@@ -103,6 +124,9 @@ static int allocate_msrs(void)
 	int success = 1;
 	size_t controls_size = sizeof(struct op_msr) * model->num_controls;
 	size_t counters_size = sizeof(struct op_msr) * model->num_counters;
+#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
+	size_t multiplex_size = sizeof(struct op_msr) * model->num_virt_counters;
+#endif
 
 	int i;
 	for_each_possible_cpu(i) {
@@ -118,6 +142,14 @@ static int allocate_msrs(void)
 			success = 0;
 			break;
 		}
+#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
+		per_cpu(cpu_msrs, i).multiplex =
+				kmalloc(multiplex_size, GFP_KERNEL);
+		if (!per_cpu(cpu_msrs, i).multiplex) {
+			success = 0;
+			break;
+		}
+#endif
 	}
 
 	if (!success)
@@ -126,6 +158,25 @@ static int allocate_msrs(void)
 	return success;
 }
 
+#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
+
+static void nmi_setup_cpu_mux(struct op_msrs const * const msrs)
+{
+	int i;
+	struct op_msr *multiplex = msrs->multiplex;
+
+	for (i = 0; i < model->num_virt_counters; ++i) {
+		if (counter_config[i].enabled) {
+			multiplex[i].saved = -(u64)counter_config[i].count;
+		} else {
+			multiplex[i].addr  = 0;
+			multiplex[i].saved = 0;
+		}
+	}
+}
+
+#endif
+
 static void nmi_cpu_setup(void *dummy)
 {
 	int cpu = smp_processor_id();
@@ -133,6 +184,9 @@ static void nmi_cpu_setup(void *dummy)
 	nmi_cpu_save_registers(msrs);
 	spin_lock(&oprofilefs_lock);
 	model->setup_ctrs(model, msrs);
+#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
+	nmi_setup_cpu_mux(msrs);
+#endif
 	spin_unlock(&oprofilefs_lock);
 	per_cpu(saved_lvtpc, cpu) = apic_read(APIC_LVTPC);
 	apic_write(APIC_LVTPC, APIC_DM_NMI);
@@ -173,14 +227,52 @@ static int nmi_setup(void)
 			memcpy(per_cpu(cpu_msrs, cpu).controls,
 				per_cpu(cpu_msrs, 0).controls,
 				sizeof(struct op_msr) * model->num_controls);
+#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
+			memcpy(per_cpu(cpu_msrs, cpu).multiplex,
+				per_cpu(cpu_msrs, 0).multiplex,
+				sizeof(struct op_msr) * model->num_virt_counters);
+#endif
 		}
-
 	}
 	on_each_cpu(nmi_cpu_setup, NULL, 1);
 	nmi_enabled = 1;
 	return 0;
 }
 
+#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
+
+static void nmi_cpu_save_mpx_registers(struct op_msrs *msrs)
+{
+	unsigned int si = __get_cpu_var(switch_index);
+	struct op_msr *multiplex = msrs->multiplex;
+	unsigned int i;
+
+	for (i = 0; i < model->num_counters; ++i) {
+		int offset = i + si;
+		if (multiplex[offset].addr) {
+			rdmsrl(multiplex[offset].addr,
+			       multiplex[offset].saved);
+		}
+	}
+}
+
+static void nmi_cpu_restore_mpx_registers(struct op_msrs *msrs)
+{
+	unsigned int si = __get_cpu_var(switch_index);
+	struct op_msr *multiplex = msrs->multiplex;
+	unsigned int i;
+
+	for (i = 0; i < model->num_counters; ++i) {
+		int offset = i + si;
+		if (multiplex[offset].addr) {
+			wrmsrl(multiplex[offset].addr,
+			       multiplex[offset].saved);
+		}
+	}
+}
+
+#endif
+
 static void nmi_cpu_restore_registers(struct op_msrs *msrs)
 {
 	struct op_msr *counters = msrs->counters;
@@ -214,6 +306,9 @@ static void nmi_cpu_shutdown(void *dummy)
 	apic_write(APIC_LVTPC, per_cpu(saved_lvtpc, cpu));
 	apic_write(APIC_LVTERR, v);
 	nmi_cpu_restore_registers(msrs);
+#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
+	__get_cpu_var(switch_index) = 0;
+#endif
 }
 
 static void nmi_shutdown(void)
@@ -252,16 +347,15 @@ static void nmi_stop(void)
 	on_each_cpu(nmi_cpu_stop, NULL, 1);
 }
 
-struct op_counter_config counter_config[OP_MAX_COUNTER];
-
 static int nmi_create_files(struct super_block *sb, struct dentry *root)
 {
 	unsigned int i;
 
-	for (i = 0; i < model->num_counters; ++i) {
+	for (i = 0; i < model->num_virt_counters; ++i) {
 		struct dentry *dir;
 		char buf[4];
 
+#ifndef CONFIG_OPROFILE_EVENT_MULTIPLEX
 		/* quick little hack to _not_ expose a counter if it is not
 		 * available for use.  This should protect userspace app.
 		 * NOTE:  assumes 1:1 mapping here (that counters are organized
@@ -269,6 +363,7 @@ static int nmi_create_files(struct super_block *sb, struct dentry *root)
 		 */
 		if (unlikely(!avail_to_resrv_perfctr_nmi_bit(i)))
 			continue;
+#endif /* CONFIG_OPROFILE_EVENT_MULTIPLEX */
 
 		snprintf(buf,  sizeof(buf), "%d", i);
 		dir = oprofilefs_mkdir(sb, root, buf);
@@ -283,6 +378,57 @@ static int nmi_create_files(struct super_block *sb, struct dentry *root)
 	return 0;
 }
 
+#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
+
+static void nmi_cpu_switch(void *dummy)
+{
+	int cpu = smp_processor_id();
+	int si = per_cpu(switch_index, cpu);
+	struct op_msrs *msrs = &per_cpu(cpu_msrs, cpu);
+
+	nmi_cpu_stop(NULL);
+	nmi_cpu_save_mpx_registers(msrs);
+
+	/* move to next set */
+	si += model->num_counters;
+	if ((si > model->num_virt_counters) || (counter_config[si].count == 0))
+		per_cpu(switch_index, cpu) = 0;
+	else
+		per_cpu(switch_index, cpu) = si;
+
+	model->switch_ctrl(model, msrs);
+	nmi_cpu_restore_mpx_registers(msrs);
+
+	nmi_cpu_start(NULL);
+}
+
+
+/*
+ * Quick check to see if multiplexing is necessary.
+ * The check should be sufficient since counters are used
+ * in ordre.
+ */
+static int nmi_multiplex_on(void)
+{
+	return counter_config[model->num_counters].count ? 0 : -EINVAL;
+}
+
+static int nmi_switch_event(void)
+{
+	if (!model->switch_ctrl)
+		return -ENOSYS;		/* not implemented */
+	if (nmi_multiplex_on() < 0)
+		return -EINVAL;		/* not necessary */
+
+	on_each_cpu(nmi_cpu_switch, NULL, 1);
+
+	atomic_inc(&multiplex_counter);
+
+	return 0;
+}
+
+#endif
+
 #ifdef CONFIG_SMP
 static int oprofile_cpu_notifier(struct notifier_block *b, unsigned long action,
 				 void *data)
@@ -516,12 +662,18 @@ int __init op_nmi_init(struct oprofile_operations *ops)
 	register_cpu_notifier(&oprofile_cpu_nb);
 #endif
 	/* default values, can be overwritten by model */
+#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
+	__raw_get_cpu_var(switch_index) = 0;
+#endif
 	ops->create_files	= nmi_create_files;
 	ops->setup		= nmi_setup;
 	ops->shutdown		= nmi_shutdown;
 	ops->start		= nmi_start;
 	ops->stop		= nmi_stop;
 	ops->cpu_type		= cpu_type;
+#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
+	ops->switch_events	= nmi_switch_event;
+#endif
 
 	if (model->init)
 		ret = model->init(ops);
diff --git a/arch/x86/oprofile/op_counter.h b/arch/x86/oprofile/op_counter.h
index 91b6a116165..e28398df0df 100644
--- a/arch/x86/oprofile/op_counter.h
+++ b/arch/x86/oprofile/op_counter.h
@@ -10,7 +10,7 @@
 #ifndef OP_COUNTER_H
 #define OP_COUNTER_H
 
-#define OP_MAX_COUNTER 8
+#define OP_MAX_COUNTER 32
 
 /* Per-perfctr configuration as set via
  * oprofilefs.
diff --git a/arch/x86/oprofile/op_model_amd.c b/arch/x86/oprofile/op_model_amd.c
index f676f8825a3..fdbed3a0c87 100644
--- a/arch/x86/oprofile/op_model_amd.c
+++ b/arch/x86/oprofile/op_model_amd.c
@@ -9,12 +9,15 @@
  * @author Philippe Elie
  * @author Graydon Hoare
  * @author Robert Richter <robert.richter@amd.com>
- * @author Barry Kasindorf
+ * @author Barry Kasindorf <barry.kasindorf@amd.com>
+ * @author Jason Yeh <jason.yeh@amd.com>
+ * @author Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
  */
 
 #include <linux/oprofile.h>
 #include <linux/device.h>
 #include <linux/pci.h>
+#include <linux/percpu.h>
 
 #include <asm/ptrace.h>
 #include <asm/msr.h>
@@ -25,12 +28,23 @@
 
 #define NUM_COUNTERS 4
 #define NUM_CONTROLS 4
+#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
+#define NUM_VIRT_COUNTERS 32
+#define NUM_VIRT_CONTROLS 32
+#else
+#define NUM_VIRT_COUNTERS NUM_COUNTERS
+#define NUM_VIRT_CONTROLS NUM_CONTROLS
+#endif
+
 #define OP_EVENT_MASK			0x0FFF
 #define OP_CTR_OVERFLOW			(1ULL<<31)
 
 #define MSR_AMD_EVENTSEL_RESERVED	((0xFFFFFCF0ULL<<32)|(1ULL<<21))
 
-static unsigned long reset_value[NUM_COUNTERS];
+static unsigned long reset_value[NUM_VIRT_COUNTERS];
+#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
+DECLARE_PER_CPU(int, switch_index);
+#endif
 
 #ifdef CONFIG_OPROFILE_IBS
 
@@ -82,6 +96,16 @@ static void op_amd_fill_in_addresses(struct op_msrs * const msrs)
 		else
 			msrs->controls[i].addr = 0;
 	}
+
+#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
+	for (i = 0; i < NUM_VIRT_COUNTERS; i++) {
+		int hw_counter = i % NUM_CONTROLS;
+		if (reserve_perfctr_nmi(MSR_K7_PERFCTR0 + i))
+			msrs->multiplex[i].addr = MSR_K7_PERFCTR0 + hw_counter;
+		else
+			msrs->multiplex[i].addr = 0;
+	}
+#endif
 }
 
 static void op_amd_setup_ctrs(struct op_x86_model_spec const *model,
@@ -90,6 +114,15 @@ static void op_amd_setup_ctrs(struct op_x86_model_spec const *model,
 	u64 val;
 	int i;
 
+	/* setup reset_value */
+	for (i = 0; i < NUM_VIRT_COUNTERS; ++i) {
+		if (counter_config[i].enabled) {
+			reset_value[i] = counter_config[i].count;
+		} else {
+			reset_value[i] = 0;
+		}
+	}
+
 	/* clear all counters */
 	for (i = 0; i < NUM_CONTROLS; ++i) {
 		if (unlikely(!msrs->controls[i].addr))
@@ -108,20 +141,49 @@ static void op_amd_setup_ctrs(struct op_x86_model_spec const *model,
 
 	/* enable active counters */
 	for (i = 0; i < NUM_COUNTERS; ++i) {
-		if (counter_config[i].enabled && msrs->counters[i].addr) {
-			reset_value[i] = counter_config[i].count;
-			wrmsrl(msrs->counters[i].addr,
-			       -(u64)counter_config[i].count);
+#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
+		int offset = i + __get_cpu_var(switch_index);
+#else
+		int offset = i;
+#endif
+		if (counter_config[offset].enabled && msrs->counters[i].addr) {
+			/* setup counter registers */
+			wrmsrl(msrs->counters[i].addr, -(u64)reset_value[offset]);
+
+			/* setup control registers */
 			rdmsrl(msrs->controls[i].addr, val);
 			val &= model->reserved;
-			val |= op_x86_get_ctrl(model, &counter_config[i]);
+			val |= op_x86_get_ctrl(model, &counter_config[offset]);
+			wrmsrl(msrs->controls[i].addr, val);
+		}
+	}
+}
+
+
+#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
+
+static void op_amd_switch_ctrl(struct op_x86_model_spec const *model,
+			       struct op_msrs const * const msrs)
+{
+	u64 val;
+	int i;
+
+	/* enable active counters */
+	for (i = 0; i < NUM_COUNTERS; ++i) {
+		int offset = i + __get_cpu_var(switch_index);
+		if (counter_config[offset].enabled) {
+			/* setup control registers */
+			rdmsrl(msrs->controls[i].addr, val);
+			val &= model->reserved;
+			val |= op_x86_get_ctrl(model, &counter_config[offset]);
 			wrmsrl(msrs->controls[i].addr, val);
-		} else {
-			reset_value[i] = 0;
 		}
 	}
 }
 
+#endif
+
+
 #ifdef CONFIG_OPROFILE_IBS
 
 static inline int
@@ -230,14 +292,19 @@ static int op_amd_check_ctrs(struct pt_regs * const regs,
 	int i;
 
 	for (i = 0; i < NUM_COUNTERS; ++i) {
-		if (!reset_value[i])
+#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
+		int offset = i + __get_cpu_var(switch_index);
+#else
+		int offset = i;
+#endif
+		if (!reset_value[offset])
 			continue;
 		rdmsrl(msrs->counters[i].addr, val);
 		/* bit is clear if overflowed: */
 		if (val & OP_CTR_OVERFLOW)
 			continue;
-		oprofile_add_sample(regs, i);
-		wrmsrl(msrs->counters[i].addr, -(u64)reset_value[i]);
+		oprofile_add_sample(regs, offset);
+		wrmsrl(msrs->counters[i].addr, -(u64)reset_value[offset]);
 	}
 
 	op_amd_handle_ibs(regs, msrs);
@@ -250,8 +317,14 @@ static void op_amd_start(struct op_msrs const * const msrs)
 {
 	u64 val;
 	int i;
+
 	for (i = 0; i < NUM_COUNTERS; ++i) {
-		if (reset_value[i]) {
+#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
+		int offset = i + __get_cpu_var(switch_index);
+#else
+		int offset = i;
+#endif
+		if (reset_value[offset]) {
 			rdmsrl(msrs->controls[i].addr, val);
 			val |= ARCH_PERFMON_EVENTSEL0_ENABLE;
 			wrmsrl(msrs->controls[i].addr, val);
@@ -271,7 +344,11 @@ static void op_amd_stop(struct op_msrs const * const msrs)
 	 * pm callback
 	 */
 	for (i = 0; i < NUM_COUNTERS; ++i) {
+#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
+		if (!reset_value[i + per_cpu(switch_index, smp_processor_id())])
+#else
 		if (!reset_value[i])
+#endif
 			continue;
 		rdmsrl(msrs->controls[i].addr, val);
 		val &= ~ARCH_PERFMON_EVENTSEL0_ENABLE;
@@ -289,7 +366,7 @@ static void op_amd_shutdown(struct op_msrs const * const msrs)
 		if (msrs->counters[i].addr)
 			release_perfctr_nmi(MSR_K7_PERFCTR0 + i);
 	}
-	for (i = 0; i < NUM_CONTROLS; ++i) {
+	for (i = 0; i < NUM_COUNTERS; ++i) {
 		if (msrs->controls[i].addr)
 			release_evntsel_nmi(MSR_K7_EVNTSEL0 + i);
 	}
@@ -463,6 +540,8 @@ static void op_amd_exit(void) {}
 struct op_x86_model_spec const op_amd_spec = {
 	.num_counters		= NUM_COUNTERS,
 	.num_controls		= NUM_CONTROLS,
+	.num_virt_counters	= NUM_VIRT_COUNTERS,
+	.num_virt_controls	= NUM_VIRT_CONTROLS,
 	.reserved		= MSR_AMD_EVENTSEL_RESERVED,
 	.event_mask		= OP_EVENT_MASK,
 	.init			= op_amd_init,
@@ -473,4 +552,7 @@ struct op_x86_model_spec const op_amd_spec = {
 	.start			= &op_amd_start,
 	.stop			= &op_amd_stop,
 	.shutdown		= &op_amd_shutdown,
+#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
+	.switch_ctrl		= &op_amd_switch_ctrl,
+#endif
 };
diff --git a/arch/x86/oprofile/op_model_p4.c b/arch/x86/oprofile/op_model_p4.c
index 5921b7fc724..65b9237cde8 100644
--- a/arch/x86/oprofile/op_model_p4.c
+++ b/arch/x86/oprofile/op_model_p4.c
@@ -698,6 +698,8 @@ static void p4_shutdown(struct op_msrs const * const msrs)
 struct op_x86_model_spec const op_p4_ht2_spec = {
 	.num_counters		= NUM_COUNTERS_HT2,
 	.num_controls		= NUM_CONTROLS_HT2,
+	.num_virt_counters	= NUM_COUNTERS_HT2,
+	.num_virt_controls	= NUM_CONTROLS_HT2,
 	.fill_in_addresses	= &p4_fill_in_addresses,
 	.setup_ctrs		= &p4_setup_ctrs,
 	.check_ctrs		= &p4_check_ctrs,
@@ -710,6 +712,8 @@ struct op_x86_model_spec const op_p4_ht2_spec = {
 struct op_x86_model_spec const op_p4_spec = {
 	.num_counters		= NUM_COUNTERS_NON_HT,
 	.num_controls		= NUM_CONTROLS_NON_HT,
+	.num_virt_counters	= NUM_COUNTERS_NON_HT,
+	.num_virt_controls	= NUM_CONTROLS_NON_HT,
 	.fill_in_addresses	= &p4_fill_in_addresses,
 	.setup_ctrs		= &p4_setup_ctrs,
 	.check_ctrs		= &p4_check_ctrs,
diff --git a/arch/x86/oprofile/op_model_ppro.c b/arch/x86/oprofile/op_model_ppro.c
index 570d717c330..098cbca5c0b 100644
--- a/arch/x86/oprofile/op_model_ppro.c
+++ b/arch/x86/oprofile/op_model_ppro.c
@@ -206,6 +206,8 @@ static void ppro_shutdown(struct op_msrs const * const msrs)
 struct op_x86_model_spec const op_ppro_spec = {
 	.num_counters		= 2,
 	.num_controls		= 2,
+	.num_virt_counters	= 2,
+	.num_virt_controls	= 2,
 	.reserved		= MSR_PPRO_EVENTSEL_RESERVED,
 	.fill_in_addresses	= &ppro_fill_in_addresses,
 	.setup_ctrs		= &ppro_setup_ctrs,
diff --git a/arch/x86/oprofile/op_x86_model.h b/arch/x86/oprofile/op_x86_model.h
index 505489873b9..0d07d23cb06 100644
--- a/arch/x86/oprofile/op_x86_model.h
+++ b/arch/x86/oprofile/op_x86_model.h
@@ -23,6 +23,7 @@ struct op_msr {
 struct op_msrs {
 	struct op_msr *counters;
 	struct op_msr *controls;
+	struct op_msr *multiplex;
 };
 
 struct pt_regs;
@@ -35,6 +36,8 @@ struct oprofile_operations;
 struct op_x86_model_spec {
 	unsigned int	num_counters;
 	unsigned int	num_controls;
+	unsigned int	num_virt_counters;
+	unsigned int	num_virt_controls;
 	u64		reserved;
 	u16		event_mask;
 	int		(*init)(struct oprofile_operations *ops);
@@ -47,6 +50,10 @@ struct op_x86_model_spec {
 	void		(*start)(struct op_msrs const * const msrs);
 	void		(*stop)(struct op_msrs const * const msrs);
 	void		(*shutdown)(struct op_msrs const * const msrs);
+#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
+	void		(*switch_ctrl)(struct op_x86_model_spec const *model,
+				       struct op_msrs const * const msrs);
+#endif
 };
 
 struct op_counter_config;
-- 
cgit v1.2.3


From 5e766e3e433fa2d5d2fdfd8e2432804c91393387 Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Wed, 8 Jul 2009 14:54:17 +0200
Subject: x86/oprofile: Fix usage of NUM_CONTROLS/NUM_COUNTERS macros

Use the corresponding macros when iterating over counter and control
registers. Since NUM_CONTROLS and NUM_COUNTERS are equal for AMD cpus
the fix is more a cosmetical change.

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/op_model_amd.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/op_model_amd.c b/arch/x86/oprofile/op_model_amd.c
index fdbed3a0c87..dcfd4505cac 100644
--- a/arch/x86/oprofile/op_model_amd.c
+++ b/arch/x86/oprofile/op_model_amd.c
@@ -99,7 +99,7 @@ static void op_amd_fill_in_addresses(struct op_msrs * const msrs)
 
 #ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
 	for (i = 0; i < NUM_VIRT_COUNTERS; i++) {
-		int hw_counter = i % NUM_CONTROLS;
+		int hw_counter = i % NUM_COUNTERS;
 		if (reserve_perfctr_nmi(MSR_K7_PERFCTR0 + i))
 			msrs->multiplex[i].addr = MSR_K7_PERFCTR0 + hw_counter;
 		else
@@ -366,7 +366,7 @@ static void op_amd_shutdown(struct op_msrs const * const msrs)
 		if (msrs->counters[i].addr)
 			release_perfctr_nmi(MSR_K7_PERFCTR0 + i);
 	}
-	for (i = 0; i < NUM_COUNTERS; ++i) {
+	for (i = 0; i < NUM_CONTROLS; ++i) {
 		if (msrs->controls[i].addr)
 			release_evntsel_nmi(MSR_K7_EVNTSEL0 + i);
 	}
-- 
cgit v1.2.3


From 82a225283fb0d9438549595d9e6f3ecc42b42ad6 Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Thu, 9 Jul 2009 16:29:34 +0200
Subject: x86/oprofile: Use per_cpu() instead of __get_cpu_var()

__get_cpu_var() calls smp_processor_id(). When the cpu id is already
known, instead use per_cpu() to avoid generating the id again.

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/nmi_int.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index e54f6a0b35a..8cd4658370b 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -294,7 +294,7 @@ static void nmi_cpu_shutdown(void *dummy)
 {
 	unsigned int v;
 	int cpu = smp_processor_id();
-	struct op_msrs *msrs = &__get_cpu_var(cpu_msrs);
+	struct op_msrs *msrs = &per_cpu(cpu_msrs, cpu);
 
 	/* restoring APIC_LVTPC can trigger an apic error because the delivery
 	 * mode and vector nr combination can be illegal. That's by design: on
@@ -307,7 +307,7 @@ static void nmi_cpu_shutdown(void *dummy)
 	apic_write(APIC_LVTERR, v);
 	nmi_cpu_restore_registers(msrs);
 #ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
-	__get_cpu_var(switch_index) = 0;
+	per_cpu(switch_index, cpu) = 0;
 #endif
 }
 
-- 
cgit v1.2.3


From 6bfccd099c2841e1c42530f1b6d2553bfa13be3a Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Thu, 9 Jul 2009 19:23:50 +0200
Subject: x86/oprofile: Fix initialization of switch_index

Variable switch_index must be initialized for each cpu. This patch
fixes the initialization by moving it to the per-cpu init function
nmi_cpu_setup().

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/nmi_int.c | 16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index 8cd4658370b..b211d335e07 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -160,7 +160,7 @@ static int allocate_msrs(void)
 
 #ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
 
-static void nmi_setup_cpu_mux(struct op_msrs const * const msrs)
+static void nmi_cpu_setup_mux(int cpu, struct op_msrs const * const msrs)
 {
 	int i;
 	struct op_msr *multiplex = msrs->multiplex;
@@ -173,8 +173,15 @@ static void nmi_setup_cpu_mux(struct op_msrs const * const msrs)
 			multiplex[i].saved = 0;
 		}
 	}
+
+	per_cpu(switch_index, cpu) = 0;
 }
 
+#else
+
+static inline void
+nmi_cpu_setup_mux(int cpu, struct op_msrs const * const msrs) { }
+
 #endif
 
 static void nmi_cpu_setup(void *dummy)
@@ -184,9 +191,7 @@ static void nmi_cpu_setup(void *dummy)
 	nmi_cpu_save_registers(msrs);
 	spin_lock(&oprofilefs_lock);
 	model->setup_ctrs(model, msrs);
-#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
-	nmi_setup_cpu_mux(msrs);
-#endif
+	nmi_cpu_setup_mux(cpu, msrs);
 	spin_unlock(&oprofilefs_lock);
 	per_cpu(saved_lvtpc, cpu) = apic_read(APIC_LVTPC);
 	apic_write(APIC_LVTPC, APIC_DM_NMI);
@@ -662,9 +667,6 @@ int __init op_nmi_init(struct oprofile_operations *ops)
 	register_cpu_notifier(&oprofile_cpu_nb);
 #endif
 	/* default values, can be overwritten by model */
-#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
-	__raw_get_cpu_var(switch_index) = 0;
-#endif
 	ops->create_files	= nmi_create_files;
 	ops->setup		= nmi_setup;
 	ops->shutdown		= nmi_shutdown;
-- 
cgit v1.2.3


From d8471ad3ab613a1ba7abd3aad46659de39a2871c Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Thu, 16 Jul 2009 13:04:43 +0200
Subject: oprofile: Introduce op_x86_phys_to_virt()

This new function translates physical to virtual counter numbers.

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/nmi_int.c      | 43 +++++++++++----------
 arch/x86/oprofile/op_model_amd.c | 80 ++++++++++++++++------------------------
 arch/x86/oprofile/op_x86_model.h |  1 +
 3 files changed, 55 insertions(+), 69 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index b211d335e07..02b57b8d0e6 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -27,12 +27,6 @@
 #include "op_counter.h"
 #include "op_x86_model.h"
 
-
-#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
-DEFINE_PER_CPU(int, switch_index);
-#endif
-
-
 static struct op_x86_model_spec const *model;
 static DEFINE_PER_CPU(struct op_msrs, cpu_msrs);
 static DEFINE_PER_CPU(unsigned long, saved_lvtpc);
@@ -103,6 +97,21 @@ static void nmi_cpu_save_registers(struct op_msrs *msrs)
 	}
 }
 
+#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
+
+static DEFINE_PER_CPU(int, switch_index);
+
+inline int op_x86_phys_to_virt(int phys)
+{
+	return __get_cpu_var(switch_index) + phys;
+}
+
+#else
+
+inline int op_x86_phys_to_virt(int phys) { return phys; }
+
+#endif
+
 static void free_msrs(void)
 {
 	int i;
@@ -248,31 +257,25 @@ static int nmi_setup(void)
 
 static void nmi_cpu_save_mpx_registers(struct op_msrs *msrs)
 {
-	unsigned int si = __get_cpu_var(switch_index);
 	struct op_msr *multiplex = msrs->multiplex;
-	unsigned int i;
+	int i;
 
 	for (i = 0; i < model->num_counters; ++i) {
-		int offset = i + si;
-		if (multiplex[offset].addr) {
-			rdmsrl(multiplex[offset].addr,
-			       multiplex[offset].saved);
-		}
+		int virt = op_x86_phys_to_virt(i);
+		if (multiplex[virt].addr)
+			rdmsrl(multiplex[virt].addr, multiplex[virt].saved);
 	}
 }
 
 static void nmi_cpu_restore_mpx_registers(struct op_msrs *msrs)
 {
-	unsigned int si = __get_cpu_var(switch_index);
 	struct op_msr *multiplex = msrs->multiplex;
-	unsigned int i;
+	int i;
 
 	for (i = 0; i < model->num_counters; ++i) {
-		int offset = i + si;
-		if (multiplex[offset].addr) {
-			wrmsrl(multiplex[offset].addr,
-			       multiplex[offset].saved);
-		}
+		int virt = op_x86_phys_to_virt(i);
+		if (multiplex[virt].addr)
+			wrmsrl(multiplex[virt].addr, multiplex[virt].saved);
 	}
 }
 
diff --git a/arch/x86/oprofile/op_model_amd.c b/arch/x86/oprofile/op_model_amd.c
index dcfd4505cac..67f830d12e0 100644
--- a/arch/x86/oprofile/op_model_amd.c
+++ b/arch/x86/oprofile/op_model_amd.c
@@ -42,9 +42,6 @@
 #define MSR_AMD_EVENTSEL_RESERVED	((0xFFFFFCF0ULL<<32)|(1ULL<<21))
 
 static unsigned long reset_value[NUM_VIRT_COUNTERS];
-#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
-DECLARE_PER_CPU(int, switch_index);
-#endif
 
 #ifdef CONFIG_OPROFILE_IBS
 
@@ -141,21 +138,20 @@ static void op_amd_setup_ctrs(struct op_x86_model_spec const *model,
 
 	/* enable active counters */
 	for (i = 0; i < NUM_COUNTERS; ++i) {
-#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
-		int offset = i + __get_cpu_var(switch_index);
-#else
-		int offset = i;
-#endif
-		if (counter_config[offset].enabled && msrs->counters[i].addr) {
-			/* setup counter registers */
-			wrmsrl(msrs->counters[i].addr, -(u64)reset_value[offset]);
-
-			/* setup control registers */
-			rdmsrl(msrs->controls[i].addr, val);
-			val &= model->reserved;
-			val |= op_x86_get_ctrl(model, &counter_config[offset]);
-			wrmsrl(msrs->controls[i].addr, val);
-		}
+		int virt = op_x86_phys_to_virt(i);
+		if (!counter_config[virt].enabled)
+			continue;
+		if (!msrs->counters[i].addr)
+			continue;
+
+		/* setup counter registers */
+		wrmsrl(msrs->counters[i].addr, -(u64)reset_value[virt]);
+
+		/* setup control registers */
+		rdmsrl(msrs->controls[i].addr, val);
+		val &= model->reserved;
+		val |= op_x86_get_ctrl(model, &counter_config[virt]);
+		wrmsrl(msrs->controls[i].addr, val);
 	}
 }
 
@@ -170,14 +166,13 @@ static void op_amd_switch_ctrl(struct op_x86_model_spec const *model,
 
 	/* enable active counters */
 	for (i = 0; i < NUM_COUNTERS; ++i) {
-		int offset = i + __get_cpu_var(switch_index);
-		if (counter_config[offset].enabled) {
-			/* setup control registers */
-			rdmsrl(msrs->controls[i].addr, val);
-			val &= model->reserved;
-			val |= op_x86_get_ctrl(model, &counter_config[offset]);
-			wrmsrl(msrs->controls[i].addr, val);
-		}
+		int virt = op_x86_phys_to_virt(i);
+		if (!counter_config[virt].enabled)
+			continue;
+		rdmsrl(msrs->controls[i].addr, val);
+		val &= model->reserved;
+		val |= op_x86_get_ctrl(model, &counter_config[virt]);
+		wrmsrl(msrs->controls[i].addr, val);
 	}
 }
 
@@ -292,19 +287,15 @@ static int op_amd_check_ctrs(struct pt_regs * const regs,
 	int i;
 
 	for (i = 0; i < NUM_COUNTERS; ++i) {
-#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
-		int offset = i + __get_cpu_var(switch_index);
-#else
-		int offset = i;
-#endif
-		if (!reset_value[offset])
+		int virt = op_x86_phys_to_virt(i);
+		if (!reset_value[virt])
 			continue;
 		rdmsrl(msrs->counters[i].addr, val);
 		/* bit is clear if overflowed: */
 		if (val & OP_CTR_OVERFLOW)
 			continue;
-		oprofile_add_sample(regs, offset);
-		wrmsrl(msrs->counters[i].addr, -(u64)reset_value[offset]);
+		oprofile_add_sample(regs, virt);
+		wrmsrl(msrs->counters[i].addr, -(u64)reset_value[virt]);
 	}
 
 	op_amd_handle_ibs(regs, msrs);
@@ -319,16 +310,11 @@ static void op_amd_start(struct op_msrs const * const msrs)
 	int i;
 
 	for (i = 0; i < NUM_COUNTERS; ++i) {
-#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
-		int offset = i + __get_cpu_var(switch_index);
-#else
-		int offset = i;
-#endif
-		if (reset_value[offset]) {
-			rdmsrl(msrs->controls[i].addr, val);
-			val |= ARCH_PERFMON_EVENTSEL0_ENABLE;
-			wrmsrl(msrs->controls[i].addr, val);
-		}
+		if (!reset_value[op_x86_phys_to_virt(i)])
+			continue;
+		rdmsrl(msrs->controls[i].addr, val);
+		val |= ARCH_PERFMON_EVENTSEL0_ENABLE;
+		wrmsrl(msrs->controls[i].addr, val);
 	}
 
 	op_amd_start_ibs();
@@ -344,11 +330,7 @@ static void op_amd_stop(struct op_msrs const * const msrs)
 	 * pm callback
 	 */
 	for (i = 0; i < NUM_COUNTERS; ++i) {
-#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
-		if (!reset_value[i + per_cpu(switch_index, smp_processor_id())])
-#else
-		if (!reset_value[i])
-#endif
+		if (!reset_value[op_x86_phys_to_virt(i)])
 			continue;
 		rdmsrl(msrs->controls[i].addr, val);
 		val &= ~ARCH_PERFMON_EVENTSEL0_ENABLE;
diff --git a/arch/x86/oprofile/op_x86_model.h b/arch/x86/oprofile/op_x86_model.h
index 0d07d23cb06..e874dc3565a 100644
--- a/arch/x86/oprofile/op_x86_model.h
+++ b/arch/x86/oprofile/op_x86_model.h
@@ -60,6 +60,7 @@ struct op_counter_config;
 
 extern u64 op_x86_get_ctrl(struct op_x86_model_spec const *model,
 			   struct op_counter_config *counter_config);
+extern int op_x86_phys_to_virt(int phys);
 
 extern struct op_x86_model_spec const op_ppro_spec;
 extern struct op_x86_model_spec const op_p4_spec;
-- 
cgit v1.2.3


From 7e7478c6bc0e011d2854b21f190cc3a1dba89905 Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Thu, 16 Jul 2009 13:09:53 +0200
Subject: oprofile: Grouping multiplexing code in op_model_amd.c

This patch moves some multiplexing code to the new function
op_mux_fill_in_addresses(). Also, the whole multiplexing code is now
at a single location.

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/op_model_amd.c | 75 ++++++++++++++++++++++------------------
 1 file changed, 41 insertions(+), 34 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/op_model_amd.c b/arch/x86/oprofile/op_model_amd.c
index 67f830d12e0..644980f0392 100644
--- a/arch/x86/oprofile/op_model_amd.c
+++ b/arch/x86/oprofile/op_model_amd.c
@@ -74,6 +74,45 @@ static struct op_ibs_config ibs_config;
 
 #endif
 
+#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
+
+static void op_mux_fill_in_addresses(struct op_msrs * const msrs)
+{
+	int i;
+
+	for (i = 0; i < NUM_VIRT_COUNTERS; i++) {
+		int hw_counter = i % NUM_COUNTERS;
+		if (reserve_perfctr_nmi(MSR_K7_PERFCTR0 + i))
+			msrs->multiplex[i].addr = MSR_K7_PERFCTR0 + hw_counter;
+		else
+			msrs->multiplex[i].addr = 0;
+	}
+}
+
+static void op_mux_switch_ctrl(struct op_x86_model_spec const *model,
+			       struct op_msrs const * const msrs)
+{
+	u64 val;
+	int i;
+
+	/* enable active counters */
+	for (i = 0; i < NUM_COUNTERS; ++i) {
+		int virt = op_x86_phys_to_virt(i);
+		if (!counter_config[virt].enabled)
+			continue;
+		rdmsrl(msrs->controls[i].addr, val);
+		val &= model->reserved;
+		val |= op_x86_get_ctrl(model, &counter_config[virt]);
+		wrmsrl(msrs->controls[i].addr, val);
+	}
+}
+
+#else
+
+static inline void op_mux_fill_in_addresses(struct op_msrs * const msrs) { }
+
+#endif
+
 /* functions for op_amd_spec */
 
 static void op_amd_fill_in_addresses(struct op_msrs * const msrs)
@@ -94,15 +133,7 @@ static void op_amd_fill_in_addresses(struct op_msrs * const msrs)
 			msrs->controls[i].addr = 0;
 	}
 
-#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
-	for (i = 0; i < NUM_VIRT_COUNTERS; i++) {
-		int hw_counter = i % NUM_COUNTERS;
-		if (reserve_perfctr_nmi(MSR_K7_PERFCTR0 + i))
-			msrs->multiplex[i].addr = MSR_K7_PERFCTR0 + hw_counter;
-		else
-			msrs->multiplex[i].addr = 0;
-	}
-#endif
+	op_mux_fill_in_addresses(msrs);
 }
 
 static void op_amd_setup_ctrs(struct op_x86_model_spec const *model,
@@ -155,30 +186,6 @@ static void op_amd_setup_ctrs(struct op_x86_model_spec const *model,
 	}
 }
 
-
-#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
-
-static void op_amd_switch_ctrl(struct op_x86_model_spec const *model,
-			       struct op_msrs const * const msrs)
-{
-	u64 val;
-	int i;
-
-	/* enable active counters */
-	for (i = 0; i < NUM_COUNTERS; ++i) {
-		int virt = op_x86_phys_to_virt(i);
-		if (!counter_config[virt].enabled)
-			continue;
-		rdmsrl(msrs->controls[i].addr, val);
-		val &= model->reserved;
-		val |= op_x86_get_ctrl(model, &counter_config[virt]);
-		wrmsrl(msrs->controls[i].addr, val);
-	}
-}
-
-#endif
-
-
 #ifdef CONFIG_OPROFILE_IBS
 
 static inline int
@@ -535,6 +542,6 @@ struct op_x86_model_spec const op_amd_spec = {
 	.stop			= &op_amd_stop,
 	.shutdown		= &op_amd_shutdown,
 #ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
-	.switch_ctrl		= &op_amd_switch_ctrl,
+	.switch_ctrl		= &op_mux_switch_ctrl,
 #endif
 };
-- 
cgit v1.2.3


From 6ab82f958a5dca591a6ea17a3ca6f2aca06f4f2f Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Thu, 9 Jul 2009 14:40:04 +0200
Subject: x86/oprofile: Implement multiplexing setup/shutdown functions

This patch implements nmi_setup_mux() and nmi_shutdown_mux() functions
to setup/shutdown multiplexing. Multiplexing code in nmi_int.c is now
much more separated.

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/nmi_int.c | 76 ++++++++++++++++++++++++---------------------
 1 file changed, 40 insertions(+), 36 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index 02b57b8d0e6..674fa37d150 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -106,9 +106,35 @@ inline int op_x86_phys_to_virt(int phys)
 	return __get_cpu_var(switch_index) + phys;
 }
 
+static void nmi_shutdown_mux(void)
+{
+	int i;
+	for_each_possible_cpu(i) {
+		kfree(per_cpu(cpu_msrs, i).multiplex);
+		per_cpu(cpu_msrs, i).multiplex = NULL;
+		per_cpu(switch_index, i) = 0;
+	}
+}
+
+static int nmi_setup_mux(void)
+{
+	size_t multiplex_size =
+		sizeof(struct op_msr) * model->num_virt_counters;
+	int i;
+	for_each_possible_cpu(i) {
+		per_cpu(cpu_msrs, i).multiplex =
+			kmalloc(multiplex_size, GFP_KERNEL);
+		if (!per_cpu(cpu_msrs, i).multiplex)
+			return 0;
+	}
+	return 1;
+}
+
 #else
 
 inline int op_x86_phys_to_virt(int phys) { return phys; }
+static inline void nmi_shutdown_mux(void) { }
+static inline int nmi_setup_mux(void) { return 1; }
 
 #endif
 
@@ -120,51 +146,27 @@ static void free_msrs(void)
 		per_cpu(cpu_msrs, i).counters = NULL;
 		kfree(per_cpu(cpu_msrs, i).controls);
 		per_cpu(cpu_msrs, i).controls = NULL;
-
-#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
-		kfree(per_cpu(cpu_msrs, i).multiplex);
-		per_cpu(cpu_msrs, i).multiplex = NULL;
-#endif
 	}
 }
 
 static int allocate_msrs(void)
 {
-	int success = 1;
 	size_t controls_size = sizeof(struct op_msr) * model->num_controls;
 	size_t counters_size = sizeof(struct op_msr) * model->num_counters;
-#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
-	size_t multiplex_size = sizeof(struct op_msr) * model->num_virt_counters;
-#endif
 
 	int i;
 	for_each_possible_cpu(i) {
 		per_cpu(cpu_msrs, i).counters = kmalloc(counters_size,
-								GFP_KERNEL);
-		if (!per_cpu(cpu_msrs, i).counters) {
-			success = 0;
-			break;
-		}
+							GFP_KERNEL);
+		if (!per_cpu(cpu_msrs, i).counters)
+			return 0;
 		per_cpu(cpu_msrs, i).controls = kmalloc(controls_size,
-								GFP_KERNEL);
-		if (!per_cpu(cpu_msrs, i).controls) {
-			success = 0;
-			break;
-		}
-#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
-		per_cpu(cpu_msrs, i).multiplex =
-				kmalloc(multiplex_size, GFP_KERNEL);
-		if (!per_cpu(cpu_msrs, i).multiplex) {
-			success = 0;
-			break;
-		}
-#endif
+							GFP_KERNEL);
+		if (!per_cpu(cpu_msrs, i).controls)
+			return 0;
 	}
 
-	if (!success)
-		free_msrs();
-
-	return success;
+	return 1;
 }
 
 #ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
@@ -218,11 +220,15 @@ static int nmi_setup(void)
 	int cpu;
 
 	if (!allocate_msrs())
-		return -ENOMEM;
+		err = -ENOMEM;
+	else if (!nmi_setup_mux())
+		err = -ENOMEM;
+	else
+		err = register_die_notifier(&profile_exceptions_nb);
 
-	err = register_die_notifier(&profile_exceptions_nb);
 	if (err) {
 		free_msrs();
+		nmi_shutdown_mux();
 		return err;
 	}
 
@@ -314,9 +320,6 @@ static void nmi_cpu_shutdown(void *dummy)
 	apic_write(APIC_LVTPC, per_cpu(saved_lvtpc, cpu));
 	apic_write(APIC_LVTERR, v);
 	nmi_cpu_restore_registers(msrs);
-#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
-	per_cpu(switch_index, cpu) = 0;
-#endif
 }
 
 static void nmi_shutdown(void)
@@ -326,6 +329,7 @@ static void nmi_shutdown(void)
 	nmi_enabled = 0;
 	on_each_cpu(nmi_cpu_shutdown, NULL, 1);
 	unregister_die_notifier(&profile_exceptions_nb);
+	nmi_shutdown_mux();
 	msrs = &get_cpu_var(cpu_msrs);
 	model->shutdown(msrs);
 	free_msrs();
-- 
cgit v1.2.3


From 48fb4b46712c7d3e8adc79826311abd9ccbf7f1d Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Thu, 9 Jul 2009 14:38:49 +0200
Subject: x86/oprofile: Moving nmi_setup_cpu_mux() in nmi_int.c

This patch moves some code in nmi_int.c to get a single separate
multiplexing code section.

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/nmi_int.c | 45 +++++++++++++++++++--------------------------
 1 file changed, 19 insertions(+), 26 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index 674fa37d150..b1edfc922e7 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -130,11 +130,30 @@ static int nmi_setup_mux(void)
 	return 1;
 }
 
+static void nmi_cpu_setup_mux(int cpu, struct op_msrs const * const msrs)
+{
+	int i;
+	struct op_msr *multiplex = msrs->multiplex;
+
+	for (i = 0; i < model->num_virt_counters; ++i) {
+		if (counter_config[i].enabled) {
+			multiplex[i].saved = -(u64)counter_config[i].count;
+		} else {
+			multiplex[i].addr  = 0;
+			multiplex[i].saved = 0;
+		}
+	}
+
+	per_cpu(switch_index, cpu) = 0;
+}
+
 #else
 
 inline int op_x86_phys_to_virt(int phys) { return phys; }
 static inline void nmi_shutdown_mux(void) { }
 static inline int nmi_setup_mux(void) { return 1; }
+static inline void
+nmi_cpu_setup_mux(int cpu, struct op_msrs const * const msrs) { }
 
 #endif
 
@@ -169,32 +188,6 @@ static int allocate_msrs(void)
 	return 1;
 }
 
-#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
-
-static void nmi_cpu_setup_mux(int cpu, struct op_msrs const * const msrs)
-{
-	int i;
-	struct op_msr *multiplex = msrs->multiplex;
-
-	for (i = 0; i < model->num_virt_counters; ++i) {
-		if (counter_config[i].enabled) {
-			multiplex[i].saved = -(u64)counter_config[i].count;
-		} else {
-			multiplex[i].addr  = 0;
-			multiplex[i].saved = 0;
-		}
-	}
-
-	per_cpu(switch_index, cpu) = 0;
-}
-
-#else
-
-static inline void
-nmi_cpu_setup_mux(int cpu, struct op_msrs const * const msrs) { }
-
-#endif
-
 static void nmi_cpu_setup(void *dummy)
 {
 	int cpu = smp_processor_id();
-- 
cgit v1.2.3


From d0f585dd20010f8479e56b5c6f391ef18e26877e Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Thu, 9 Jul 2009 14:38:49 +0200
Subject: x86/oprofile: Moving nmi_cpu_save/restore_mpx_registers() in
 nmi_int.c

This patch moves some code in nmi_int.c to get a single separate
multiplexing code section.

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/nmi_int.c | 52 +++++++++++++++++++++------------------------
 1 file changed, 24 insertions(+), 28 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index b1edfc922e7..f38c5cf0fdb 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -147,6 +147,30 @@ static void nmi_cpu_setup_mux(int cpu, struct op_msrs const * const msrs)
 	per_cpu(switch_index, cpu) = 0;
 }
 
+static void nmi_cpu_save_mpx_registers(struct op_msrs *msrs)
+{
+	struct op_msr *multiplex = msrs->multiplex;
+	int i;
+
+	for (i = 0; i < model->num_counters; ++i) {
+		int virt = op_x86_phys_to_virt(i);
+		if (multiplex[virt].addr)
+			rdmsrl(multiplex[virt].addr, multiplex[virt].saved);
+	}
+}
+
+static void nmi_cpu_restore_mpx_registers(struct op_msrs *msrs)
+{
+	struct op_msr *multiplex = msrs->multiplex;
+	int i;
+
+	for (i = 0; i < model->num_counters; ++i) {
+		int virt = op_x86_phys_to_virt(i);
+		if (multiplex[virt].addr)
+			wrmsrl(multiplex[virt].addr, multiplex[virt].saved);
+	}
+}
+
 #else
 
 inline int op_x86_phys_to_virt(int phys) { return phys; }
@@ -252,34 +276,6 @@ static int nmi_setup(void)
 	return 0;
 }
 
-#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
-
-static void nmi_cpu_save_mpx_registers(struct op_msrs *msrs)
-{
-	struct op_msr *multiplex = msrs->multiplex;
-	int i;
-
-	for (i = 0; i < model->num_counters; ++i) {
-		int virt = op_x86_phys_to_virt(i);
-		if (multiplex[virt].addr)
-			rdmsrl(multiplex[virt].addr, multiplex[virt].saved);
-	}
-}
-
-static void nmi_cpu_restore_mpx_registers(struct op_msrs *msrs)
-{
-	struct op_msr *multiplex = msrs->multiplex;
-	int i;
-
-	for (i = 0; i < model->num_counters; ++i) {
-		int virt = op_x86_phys_to_virt(i);
-		if (multiplex[virt].addr)
-			wrmsrl(multiplex[virt].addr, multiplex[virt].saved);
-	}
-}
-
-#endif
-
 static void nmi_cpu_restore_registers(struct op_msrs *msrs)
 {
 	struct op_msr *counters = msrs->counters;
-- 
cgit v1.2.3


From b28d1b923ab52d535c0719155dccf3b3d98bab9f Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Thu, 9 Jul 2009 14:38:49 +0200
Subject: x86/oprofile: Moving nmi_cpu_switch() in nmi_int.c

This patch moves some code in nmi_int.c to get a single separate
multiplexing code section.

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/nmi_int.c | 144 +++++++++++++++++++++-----------------------
 1 file changed, 70 insertions(+), 74 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index f38c5cf0fdb..998c7dca31e 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -97,6 +97,29 @@ static void nmi_cpu_save_registers(struct op_msrs *msrs)
 	}
 }
 
+static void nmi_cpu_start(void *dummy)
+{
+	struct op_msrs const *msrs = &__get_cpu_var(cpu_msrs);
+	model->start(msrs);
+}
+
+static int nmi_start(void)
+{
+	on_each_cpu(nmi_cpu_start, NULL, 1);
+	return 0;
+}
+
+static void nmi_cpu_stop(void *dummy)
+{
+	struct op_msrs const *msrs = &__get_cpu_var(cpu_msrs);
+	model->stop(msrs);
+}
+
+static void nmi_stop(void)
+{
+	on_each_cpu(nmi_cpu_stop, NULL, 1);
+}
+
 #ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
 
 static DEFINE_PER_CPU(int, switch_index);
@@ -171,6 +194,53 @@ static void nmi_cpu_restore_mpx_registers(struct op_msrs *msrs)
 	}
 }
 
+static void nmi_cpu_switch(void *dummy)
+{
+	int cpu = smp_processor_id();
+	int si = per_cpu(switch_index, cpu);
+	struct op_msrs *msrs = &per_cpu(cpu_msrs, cpu);
+
+	nmi_cpu_stop(NULL);
+	nmi_cpu_save_mpx_registers(msrs);
+
+	/* move to next set */
+	si += model->num_counters;
+	if ((si > model->num_virt_counters) || (counter_config[si].count == 0))
+		per_cpu(switch_index, cpu) = 0;
+	else
+		per_cpu(switch_index, cpu) = si;
+
+	model->switch_ctrl(model, msrs);
+	nmi_cpu_restore_mpx_registers(msrs);
+
+	nmi_cpu_start(NULL);
+}
+
+
+/*
+ * Quick check to see if multiplexing is necessary.
+ * The check should be sufficient since counters are used
+ * in ordre.
+ */
+static int nmi_multiplex_on(void)
+{
+	return counter_config[model->num_counters].count ? 0 : -EINVAL;
+}
+
+static int nmi_switch_event(void)
+{
+	if (!model->switch_ctrl)
+		return -ENOSYS;		/* not implemented */
+	if (nmi_multiplex_on() < 0)
+		return -EINVAL;		/* not necessary */
+
+	on_each_cpu(nmi_cpu_switch, NULL, 1);
+
+	atomic_inc(&multiplex_counter);
+
+	return 0;
+}
+
 #else
 
 inline int op_x86_phys_to_virt(int phys) { return phys; }
@@ -325,29 +395,6 @@ static void nmi_shutdown(void)
 	put_cpu_var(cpu_msrs);
 }
 
-static void nmi_cpu_start(void *dummy)
-{
-	struct op_msrs const *msrs = &__get_cpu_var(cpu_msrs);
-	model->start(msrs);
-}
-
-static int nmi_start(void)
-{
-	on_each_cpu(nmi_cpu_start, NULL, 1);
-	return 0;
-}
-
-static void nmi_cpu_stop(void *dummy)
-{
-	struct op_msrs const *msrs = &__get_cpu_var(cpu_msrs);
-	model->stop(msrs);
-}
-
-static void nmi_stop(void)
-{
-	on_each_cpu(nmi_cpu_stop, NULL, 1);
-}
-
 static int nmi_create_files(struct super_block *sb, struct dentry *root)
 {
 	unsigned int i;
@@ -379,57 +426,6 @@ static int nmi_create_files(struct super_block *sb, struct dentry *root)
 	return 0;
 }
 
-#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
-
-static void nmi_cpu_switch(void *dummy)
-{
-	int cpu = smp_processor_id();
-	int si = per_cpu(switch_index, cpu);
-	struct op_msrs *msrs = &per_cpu(cpu_msrs, cpu);
-
-	nmi_cpu_stop(NULL);
-	nmi_cpu_save_mpx_registers(msrs);
-
-	/* move to next set */
-	si += model->num_counters;
-	if ((si > model->num_virt_counters) || (counter_config[si].count == 0))
-		per_cpu(switch_index, cpu) = 0;
-	else
-		per_cpu(switch_index, cpu) = si;
-
-	model->switch_ctrl(model, msrs);
-	nmi_cpu_restore_mpx_registers(msrs);
-
-	nmi_cpu_start(NULL);
-}
-
-
-/*
- * Quick check to see if multiplexing is necessary.
- * The check should be sufficient since counters are used
- * in ordre.
- */
-static int nmi_multiplex_on(void)
-{
-	return counter_config[model->num_counters].count ? 0 : -EINVAL;
-}
-
-static int nmi_switch_event(void)
-{
-	if (!model->switch_ctrl)
-		return -ENOSYS;		/* not implemented */
-	if (nmi_multiplex_on() < 0)
-		return -EINVAL;		/* not necessary */
-
-	on_each_cpu(nmi_cpu_switch, NULL, 1);
-
-	atomic_inc(&multiplex_counter);
-
-	return 0;
-}
-
-#endif
-
 #ifdef CONFIG_SMP
 static int oprofile_cpu_notifier(struct notifier_block *b, unsigned long action,
 				 void *data)
-- 
cgit v1.2.3


From 259a83a8abdb9d2664819ec80ad12ebaeb251e32 Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Thu, 9 Jul 2009 15:12:35 +0200
Subject: x86/oprofile: Remove const qualifier from struct op_x86_model_spec

This patch removes the const qualifier from struct
op_x86_model_spec to make model parameters changable.

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/nmi_int.c       | 4 ++--
 arch/x86/oprofile/op_model_amd.c  | 2 +-
 arch/x86/oprofile/op_model_p4.c   | 4 ++--
 arch/x86/oprofile/op_model_ppro.c | 2 +-
 arch/x86/oprofile/op_x86_model.h  | 8 ++++----
 5 files changed, 10 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index 998c7dca31e..826f391b422 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -27,7 +27,7 @@
 #include "op_counter.h"
 #include "op_x86_model.h"
 
-static struct op_x86_model_spec const *model;
+static struct op_x86_model_spec *model;
 static DEFINE_PER_CPU(struct op_msrs, cpu_msrs);
 static DEFINE_PER_CPU(unsigned long, saved_lvtpc);
 
@@ -542,7 +542,7 @@ module_param_call(cpu_type, force_cpu_type, NULL, NULL, 0);
 static int __init ppro_init(char **cpu_type)
 {
 	__u8 cpu_model = boot_cpu_data.x86_model;
-	struct op_x86_model_spec const *spec = &op_ppro_spec;	/* default */
+	struct op_x86_model_spec *spec = &op_ppro_spec;	/* default */
 
 	if (force_arch_perfmon && cpu_has_arch_perfmon)
 		return 0;
diff --git a/arch/x86/oprofile/op_model_amd.c b/arch/x86/oprofile/op_model_amd.c
index 644980f0392..39604b429d6 100644
--- a/arch/x86/oprofile/op_model_amd.c
+++ b/arch/x86/oprofile/op_model_amd.c
@@ -526,7 +526,7 @@ static void op_amd_exit(void) {}
 
 #endif /* CONFIG_OPROFILE_IBS */
 
-struct op_x86_model_spec const op_amd_spec = {
+struct op_x86_model_spec op_amd_spec = {
 	.num_counters		= NUM_COUNTERS,
 	.num_controls		= NUM_CONTROLS,
 	.num_virt_counters	= NUM_VIRT_COUNTERS,
diff --git a/arch/x86/oprofile/op_model_p4.c b/arch/x86/oprofile/op_model_p4.c
index 65b9237cde8..40df028d0d9 100644
--- a/arch/x86/oprofile/op_model_p4.c
+++ b/arch/x86/oprofile/op_model_p4.c
@@ -695,7 +695,7 @@ static void p4_shutdown(struct op_msrs const * const msrs)
 
 
 #ifdef CONFIG_SMP
-struct op_x86_model_spec const op_p4_ht2_spec = {
+struct op_x86_model_spec op_p4_ht2_spec = {
 	.num_counters		= NUM_COUNTERS_HT2,
 	.num_controls		= NUM_CONTROLS_HT2,
 	.num_virt_counters	= NUM_COUNTERS_HT2,
@@ -709,7 +709,7 @@ struct op_x86_model_spec const op_p4_ht2_spec = {
 };
 #endif
 
-struct op_x86_model_spec const op_p4_spec = {
+struct op_x86_model_spec op_p4_spec = {
 	.num_counters		= NUM_COUNTERS_NON_HT,
 	.num_controls		= NUM_CONTROLS_NON_HT,
 	.num_virt_counters	= NUM_COUNTERS_NON_HT,
diff --git a/arch/x86/oprofile/op_model_ppro.c b/arch/x86/oprofile/op_model_ppro.c
index 098cbca5c0b..659f3b6f86f 100644
--- a/arch/x86/oprofile/op_model_ppro.c
+++ b/arch/x86/oprofile/op_model_ppro.c
@@ -203,7 +203,7 @@ static void ppro_shutdown(struct op_msrs const * const msrs)
 }
 
 
-struct op_x86_model_spec const op_ppro_spec = {
+struct op_x86_model_spec op_ppro_spec = {
 	.num_counters		= 2,
 	.num_controls		= 2,
 	.num_virt_counters	= 2,
diff --git a/arch/x86/oprofile/op_x86_model.h b/arch/x86/oprofile/op_x86_model.h
index e874dc3565a..0c886fa0369 100644
--- a/arch/x86/oprofile/op_x86_model.h
+++ b/arch/x86/oprofile/op_x86_model.h
@@ -62,10 +62,10 @@ extern u64 op_x86_get_ctrl(struct op_x86_model_spec const *model,
 			   struct op_counter_config *counter_config);
 extern int op_x86_phys_to_virt(int phys);
 
-extern struct op_x86_model_spec const op_ppro_spec;
-extern struct op_x86_model_spec const op_p4_spec;
-extern struct op_x86_model_spec const op_p4_ht2_spec;
-extern struct op_x86_model_spec const op_amd_spec;
+extern struct op_x86_model_spec op_ppro_spec;
+extern struct op_x86_model_spec op_p4_spec;
+extern struct op_x86_model_spec op_p4_ht2_spec;
+extern struct op_x86_model_spec op_amd_spec;
 extern struct op_x86_model_spec op_arch_perfmon_spec;
 
 #endif /* OP_X86_MODEL_H */
-- 
cgit v1.2.3


From 2904a527575344a804fdd82b1f8d09a8731d8d49 Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Thu, 9 Jul 2009 12:33:41 +0200
Subject: x86/oprofile: Remove unused num_virt_controls from struct
 op_x86_model_spec

The member num_virt_controls of struct op_x86_model_spec is not
used. This patch removes it.

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/op_model_amd.c  | 1 -
 arch/x86/oprofile/op_model_p4.c   | 2 --
 arch/x86/oprofile/op_model_ppro.c | 1 -
 arch/x86/oprofile/op_x86_model.h  | 1 -
 4 files changed, 5 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/op_model_amd.c b/arch/x86/oprofile/op_model_amd.c
index 39604b429d6..dce69b5979e 100644
--- a/arch/x86/oprofile/op_model_amd.c
+++ b/arch/x86/oprofile/op_model_amd.c
@@ -530,7 +530,6 @@ struct op_x86_model_spec op_amd_spec = {
 	.num_counters		= NUM_COUNTERS,
 	.num_controls		= NUM_CONTROLS,
 	.num_virt_counters	= NUM_VIRT_COUNTERS,
-	.num_virt_controls	= NUM_VIRT_CONTROLS,
 	.reserved		= MSR_AMD_EVENTSEL_RESERVED,
 	.event_mask		= OP_EVENT_MASK,
 	.init			= op_amd_init,
diff --git a/arch/x86/oprofile/op_model_p4.c b/arch/x86/oprofile/op_model_p4.c
index 40df028d0d9..0a4f2deb9e8 100644
--- a/arch/x86/oprofile/op_model_p4.c
+++ b/arch/x86/oprofile/op_model_p4.c
@@ -699,7 +699,6 @@ struct op_x86_model_spec op_p4_ht2_spec = {
 	.num_counters		= NUM_COUNTERS_HT2,
 	.num_controls		= NUM_CONTROLS_HT2,
 	.num_virt_counters	= NUM_COUNTERS_HT2,
-	.num_virt_controls	= NUM_CONTROLS_HT2,
 	.fill_in_addresses	= &p4_fill_in_addresses,
 	.setup_ctrs		= &p4_setup_ctrs,
 	.check_ctrs		= &p4_check_ctrs,
@@ -713,7 +712,6 @@ struct op_x86_model_spec op_p4_spec = {
 	.num_counters		= NUM_COUNTERS_NON_HT,
 	.num_controls		= NUM_CONTROLS_NON_HT,
 	.num_virt_counters	= NUM_COUNTERS_NON_HT,
-	.num_virt_controls	= NUM_CONTROLS_NON_HT,
 	.fill_in_addresses	= &p4_fill_in_addresses,
 	.setup_ctrs		= &p4_setup_ctrs,
 	.check_ctrs		= &p4_check_ctrs,
diff --git a/arch/x86/oprofile/op_model_ppro.c b/arch/x86/oprofile/op_model_ppro.c
index 659f3b6f86f..753a02ab215 100644
--- a/arch/x86/oprofile/op_model_ppro.c
+++ b/arch/x86/oprofile/op_model_ppro.c
@@ -207,7 +207,6 @@ struct op_x86_model_spec op_ppro_spec = {
 	.num_counters		= 2,
 	.num_controls		= 2,
 	.num_virt_counters	= 2,
-	.num_virt_controls	= 2,
 	.reserved		= MSR_PPRO_EVENTSEL_RESERVED,
 	.fill_in_addresses	= &ppro_fill_in_addresses,
 	.setup_ctrs		= &ppro_setup_ctrs,
diff --git a/arch/x86/oprofile/op_x86_model.h b/arch/x86/oprofile/op_x86_model.h
index 0c886fa0369..4e2e7c2c519 100644
--- a/arch/x86/oprofile/op_x86_model.h
+++ b/arch/x86/oprofile/op_x86_model.h
@@ -37,7 +37,6 @@ struct op_x86_model_spec {
 	unsigned int	num_counters;
 	unsigned int	num_controls;
 	unsigned int	num_virt_counters;
-	unsigned int	num_virt_controls;
 	u64		reserved;
 	u16		event_mask;
 	int		(*init)(struct oprofile_operations *ops);
-- 
cgit v1.2.3


From 52471c67ee2fa5ed6f700ef57bf27833c63b2192 Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Mon, 6 Jul 2009 14:43:55 +0200
Subject: x86/oprofile: Modify initialization of num_virt_counters

Models that do not yet support counter multiplexing have to setup
num_virt_counters. This patch implements the setup from num_counters
if num_virt_counters is not set. Thus, num_virt_counters must be setup
only for multiplexing support.

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/nmi_int.c       | 3 +++
 arch/x86/oprofile/op_model_p4.c   | 2 --
 arch/x86/oprofile/op_model_ppro.c | 1 -
 3 files changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index 826f391b422..82ee29517f1 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -674,6 +674,9 @@ int __init op_nmi_init(struct oprofile_operations *ops)
 	if (ret)
 		return ret;
 
+	if (!model->num_virt_counters)
+		model->num_virt_counters = model->num_counters;
+
 	init_sysfs();
 	using_nmi = 1;
 	printk(KERN_INFO "oprofile: using NMI interrupt.\n");
diff --git a/arch/x86/oprofile/op_model_p4.c b/arch/x86/oprofile/op_model_p4.c
index 0a4f2deb9e8..ac6b354becd 100644
--- a/arch/x86/oprofile/op_model_p4.c
+++ b/arch/x86/oprofile/op_model_p4.c
@@ -698,7 +698,6 @@ static void p4_shutdown(struct op_msrs const * const msrs)
 struct op_x86_model_spec op_p4_ht2_spec = {
 	.num_counters		= NUM_COUNTERS_HT2,
 	.num_controls		= NUM_CONTROLS_HT2,
-	.num_virt_counters	= NUM_COUNTERS_HT2,
 	.fill_in_addresses	= &p4_fill_in_addresses,
 	.setup_ctrs		= &p4_setup_ctrs,
 	.check_ctrs		= &p4_check_ctrs,
@@ -711,7 +710,6 @@ struct op_x86_model_spec op_p4_ht2_spec = {
 struct op_x86_model_spec op_p4_spec = {
 	.num_counters		= NUM_COUNTERS_NON_HT,
 	.num_controls		= NUM_CONTROLS_NON_HT,
-	.num_virt_counters	= NUM_COUNTERS_NON_HT,
 	.fill_in_addresses	= &p4_fill_in_addresses,
 	.setup_ctrs		= &p4_setup_ctrs,
 	.check_ctrs		= &p4_check_ctrs,
diff --git a/arch/x86/oprofile/op_model_ppro.c b/arch/x86/oprofile/op_model_ppro.c
index 753a02ab215..4899215999d 100644
--- a/arch/x86/oprofile/op_model_ppro.c
+++ b/arch/x86/oprofile/op_model_ppro.c
@@ -206,7 +206,6 @@ static void ppro_shutdown(struct op_msrs const * const msrs)
 struct op_x86_model_spec op_ppro_spec = {
 	.num_counters		= 2,
 	.num_controls		= 2,
-	.num_virt_counters	= 2,
 	.reserved		= MSR_PPRO_EVENTSEL_RESERVED,
 	.fill_in_addresses	= &ppro_fill_in_addresses,
 	.setup_ctrs		= &ppro_setup_ctrs,
-- 
cgit v1.2.3


From 39e97f40c3a5e71de0532368deaa683e09b74ba2 Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Thu, 9 Jul 2009 15:11:45 +0200
Subject: x86/oprofile: Add function has_mux() to check multiplexing support

The check is used to prevent running multiplexing code for models not
supporting multiplexing. Before, the code was running but without
effect.

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/nmi_int.c | 19 ++++++++++++++++++-
 1 file changed, 18 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index 82ee29517f1..dca7240aeb2 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -124,6 +124,11 @@ static void nmi_stop(void)
 
 static DEFINE_PER_CPU(int, switch_index);
 
+static inline int has_mux(void)
+{
+	return !!model->switch_ctrl;
+}
+
 inline int op_x86_phys_to_virt(int phys)
 {
 	return __get_cpu_var(switch_index) + phys;
@@ -132,6 +137,10 @@ inline int op_x86_phys_to_virt(int phys)
 static void nmi_shutdown_mux(void)
 {
 	int i;
+
+	if (!has_mux())
+		return;
+
 	for_each_possible_cpu(i) {
 		kfree(per_cpu(cpu_msrs, i).multiplex);
 		per_cpu(cpu_msrs, i).multiplex = NULL;
@@ -144,12 +153,17 @@ static int nmi_setup_mux(void)
 	size_t multiplex_size =
 		sizeof(struct op_msr) * model->num_virt_counters;
 	int i;
+
+	if (!has_mux())
+		return 1;
+
 	for_each_possible_cpu(i) {
 		per_cpu(cpu_msrs, i).multiplex =
 			kmalloc(multiplex_size, GFP_KERNEL);
 		if (!per_cpu(cpu_msrs, i).multiplex)
 			return 0;
 	}
+
 	return 1;
 }
 
@@ -158,6 +172,9 @@ static void nmi_cpu_setup_mux(int cpu, struct op_msrs const * const msrs)
 	int i;
 	struct op_msr *multiplex = msrs->multiplex;
 
+	if (!has_mux())
+		return;
+
 	for (i = 0; i < model->num_virt_counters; ++i) {
 		if (counter_config[i].enabled) {
 			multiplex[i].saved = -(u64)counter_config[i].count;
@@ -229,7 +246,7 @@ static int nmi_multiplex_on(void)
 
 static int nmi_switch_event(void)
 {
-	if (!model->switch_ctrl)
+	if (!has_mux())
 		return -ENOSYS;		/* not implemented */
 	if (nmi_multiplex_on() < 0)
 		return -EINVAL;		/* not necessary */
-- 
cgit v1.2.3


From 5280514471c2803776701c43c027038decac1103 Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Thu, 9 Jul 2009 16:02:44 +0200
Subject: x86/oprofile: Enable multiplexing only if the model supports it

This patch checks if the model supports multiplexing. Only then
multiplexing will be enabled. The code is added to the common x86
initialization.

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/nmi_int.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index dca7240aeb2..f0fb44725d8 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -258,6 +258,12 @@ static int nmi_switch_event(void)
 	return 0;
 }
 
+static inline void mux_init(struct oprofile_operations *ops)
+{
+	if (has_mux())
+		ops->switch_events = nmi_switch_event;
+}
+
 #else
 
 inline int op_x86_phys_to_virt(int phys) { return phys; }
@@ -265,6 +271,7 @@ static inline void nmi_shutdown_mux(void) { }
 static inline int nmi_setup_mux(void) { return 1; }
 static inline void
 nmi_cpu_setup_mux(int cpu, struct op_msrs const * const msrs) { }
+static inline void mux_init(struct oprofile_operations *ops) { }
 
 #endif
 
@@ -682,9 +689,6 @@ int __init op_nmi_init(struct oprofile_operations *ops)
 	ops->start		= nmi_start;
 	ops->stop		= nmi_stop;
 	ops->cpu_type		= cpu_type;
-#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
-	ops->switch_events	= nmi_switch_event;
-#endif
 
 	if (model->init)
 		ret = model->init(ops);
@@ -694,6 +698,8 @@ int __init op_nmi_init(struct oprofile_operations *ops)
 	if (!model->num_virt_counters)
 		model->num_virt_counters = model->num_counters;
 
+	mux_init(ops);
+
 	init_sysfs();
 	using_nmi = 1;
 	printk(KERN_INFO "oprofile: using NMI interrupt.\n");
-- 
cgit v1.2.3


From 4d015f79e972cea1761cfee8872b1c0992ccd8b2 Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Thu, 9 Jul 2009 21:42:51 +0200
Subject: x86/oprofile: Implement mux_clone()

To setup a counter for all cpus, its structure is cloned from cpu
0. This patch implements mux_clone() to do this part for multiplexing
data.

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/nmi_int.c | 37 +++++++++++++++++++++++--------------
 1 file changed, 23 insertions(+), 14 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index f0fb44725d8..da6d2ab31c6 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -264,6 +264,16 @@ static inline void mux_init(struct oprofile_operations *ops)
 		ops->switch_events = nmi_switch_event;
 }
 
+static void mux_clone(int cpu)
+{
+	if (!has_mux())
+		return;
+
+	memcpy(per_cpu(cpu_msrs, cpu).multiplex,
+	       per_cpu(cpu_msrs, 0).multiplex,
+	       sizeof(struct op_msr) * model->num_virt_counters);
+}
+
 #else
 
 inline int op_x86_phys_to_virt(int phys) { return phys; }
@@ -272,6 +282,7 @@ static inline int nmi_setup_mux(void) { return 1; }
 static inline void
 nmi_cpu_setup_mux(int cpu, struct op_msrs const * const msrs) { }
 static inline void mux_init(struct oprofile_operations *ops) { }
+static void mux_clone(int cpu) { }
 
 #endif
 
@@ -350,20 +361,18 @@ static int nmi_setup(void)
 	/* Assume saved/restored counters are the same on all CPUs */
 	model->fill_in_addresses(&per_cpu(cpu_msrs, 0));
 	for_each_possible_cpu(cpu) {
-		if (cpu != 0) {
-			memcpy(per_cpu(cpu_msrs, cpu).counters,
-				per_cpu(cpu_msrs, 0).counters,
-				sizeof(struct op_msr) * model->num_counters);
-
-			memcpy(per_cpu(cpu_msrs, cpu).controls,
-				per_cpu(cpu_msrs, 0).controls,
-				sizeof(struct op_msr) * model->num_controls);
-#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
-			memcpy(per_cpu(cpu_msrs, cpu).multiplex,
-				per_cpu(cpu_msrs, 0).multiplex,
-				sizeof(struct op_msr) * model->num_virt_counters);
-#endif
-		}
+		if (!cpu)
+			continue;
+
+		memcpy(per_cpu(cpu_msrs, cpu).counters,
+		       per_cpu(cpu_msrs, 0).counters,
+		       sizeof(struct op_msr) * model->num_counters);
+
+		memcpy(per_cpu(cpu_msrs, cpu).controls,
+		       per_cpu(cpu_msrs, 0).controls,
+		       sizeof(struct op_msr) * model->num_controls);
+
+		mux_clone(cpu);
 	}
 	on_each_cpu(nmi_cpu_setup, NULL, 1);
 	nmi_enabled = 1;
-- 
cgit v1.2.3


From 1b294f5960cd89e49eeb3e797860c552b03f2272 Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Thu, 9 Jul 2009 14:56:25 +0200
Subject: oprofile: Adding switch counter to oprofile statistic variables

This patch moves the multiplexing switch counter from x86 code to
common oprofile statistic variables. Now the value will be available
and usable for all architectures. The initialization and
incrementation also moved to common code.

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/nmi_int.c | 7 -------
 1 file changed, 7 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index da6d2ab31c6..7b3362f9abd 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -34,11 +34,6 @@ static DEFINE_PER_CPU(unsigned long, saved_lvtpc);
 /* 0 == registered but off, 1 == registered and on */
 static int nmi_enabled = 0;
 
-
-#ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
-extern atomic_t multiplex_counter;
-#endif
-
 struct op_counter_config counter_config[OP_MAX_COUNTER];
 
 /* common functions */
@@ -253,8 +248,6 @@ static int nmi_switch_event(void)
 
 	on_each_cpu(nmi_cpu_switch, NULL, 1);
 
-	atomic_inc(&multiplex_counter);
-
 	return 0;
 }
 
-- 
cgit v1.2.3


From 61d149d5248ad7428801cdede0f5fcc2b90cd61c Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Fri, 10 Jul 2009 15:47:17 +0200
Subject: x86/oprofile: Implement op_x86_virt_to_phys()

This patch implements a common x86 function to convert virtual counter
numbers to physical.

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/nmi_int.c      | 6 ++++++
 arch/x86/oprofile/op_model_amd.c | 2 +-
 arch/x86/oprofile/op_x86_model.h | 1 +
 3 files changed, 8 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index 7b3362f9abd..5856e61cb09 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -129,6 +129,11 @@ inline int op_x86_phys_to_virt(int phys)
 	return __get_cpu_var(switch_index) + phys;
 }
 
+inline int op_x86_virt_to_phys(int virt)
+{
+	return virt % model->num_counters;
+}
+
 static void nmi_shutdown_mux(void)
 {
 	int i;
@@ -270,6 +275,7 @@ static void mux_clone(int cpu)
 #else
 
 inline int op_x86_phys_to_virt(int phys) { return phys; }
+inline int op_x86_virt_to_phys(int virt) { return virt; }
 static inline void nmi_shutdown_mux(void) { }
 static inline int nmi_setup_mux(void) { return 1; }
 static inline void
diff --git a/arch/x86/oprofile/op_model_amd.c b/arch/x86/oprofile/op_model_amd.c
index dce69b5979e..1ea19829d98 100644
--- a/arch/x86/oprofile/op_model_amd.c
+++ b/arch/x86/oprofile/op_model_amd.c
@@ -81,7 +81,7 @@ static void op_mux_fill_in_addresses(struct op_msrs * const msrs)
 	int i;
 
 	for (i = 0; i < NUM_VIRT_COUNTERS; i++) {
-		int hw_counter = i % NUM_COUNTERS;
+		int hw_counter = op_x86_virt_to_phys(i);
 		if (reserve_perfctr_nmi(MSR_K7_PERFCTR0 + i))
 			msrs->multiplex[i].addr = MSR_K7_PERFCTR0 + hw_counter;
 		else
diff --git a/arch/x86/oprofile/op_x86_model.h b/arch/x86/oprofile/op_x86_model.h
index 4e2e7c2c519..b83776180c7 100644
--- a/arch/x86/oprofile/op_x86_model.h
+++ b/arch/x86/oprofile/op_x86_model.h
@@ -60,6 +60,7 @@ struct op_counter_config;
 extern u64 op_x86_get_ctrl(struct op_x86_model_spec const *model,
 			   struct op_counter_config *counter_config);
 extern int op_x86_phys_to_virt(int phys);
+extern int op_x86_virt_to_phys(int virt);
 
 extern struct op_x86_model_spec op_ppro_spec;
 extern struct op_x86_model_spec op_p4_spec;
-- 
cgit v1.2.3


From 11be1a7b54283021777f409aa983ce125945e67c Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Fri, 10 Jul 2009 18:15:21 +0200
Subject: x86/oprofile: Add counter reservation check for virtual counters

This patch adds a check for the availability of a counter. A virtual
counter is used only if its physical counter is not reserved.

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/nmi_int.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index 5856e61cb09..cb88b1a0bd5 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -435,15 +435,13 @@ static int nmi_create_files(struct super_block *sb, struct dentry *root)
 		struct dentry *dir;
 		char buf[4];
 
-#ifndef CONFIG_OPROFILE_EVENT_MULTIPLEX
 		/* quick little hack to _not_ expose a counter if it is not
 		 * available for use.  This should protect userspace app.
 		 * NOTE:  assumes 1:1 mapping here (that counters are organized
 		 *        sequentially in their struct assignment).
 		 */
-		if (unlikely(!avail_to_resrv_perfctr_nmi_bit(i)))
+		if (!avail_to_resrv_perfctr_nmi_bit(op_x86_virt_to_phys(i)))
 			continue;
-#endif /* CONFIG_OPROFILE_EVENT_MULTIPLEX */
 
 		snprintf(buf,  sizeof(buf), "%d", i);
 		dir = oprofilefs_mkdir(sb, root, buf);
-- 
cgit v1.2.3


From c550091edd6fac2ed9dac1b30d986b6c58b216fa Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Thu, 16 Jul 2009 13:11:16 +0200
Subject: x86/oprofile: Small coding style fixes

Some small coding style fixes.

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/op_model_amd.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/op_model_amd.c b/arch/x86/oprofile/op_model_amd.c
index 1ea19829d98..827beecb67a 100644
--- a/arch/x86/oprofile/op_model_amd.c
+++ b/arch/x86/oprofile/op_model_amd.c
@@ -144,11 +144,10 @@ static void op_amd_setup_ctrs(struct op_x86_model_spec const *model,
 
 	/* setup reset_value */
 	for (i = 0; i < NUM_VIRT_COUNTERS; ++i) {
-		if (counter_config[i].enabled) {
+		if (counter_config[i].enabled)
 			reset_value[i] = counter_config[i].count;
-		} else {
+		else
 			reset_value[i] = 0;
-		}
 	}
 
 	/* clear all counters */
-- 
cgit v1.2.3


From 3aa7a9a3cf8774f6701b1903a6353f9545f561ce Mon Sep 17 00:00:00 2001
From: Hartley Sweeten <hartleys@visionengravers.com>
Date: Mon, 20 Jul 2009 18:22:36 +0100
Subject: [ARM] 5612/1: ep93xx: add platform LEDs

The EP93xx has two gpio pins specifically assigned to drive
external LEDs.  Add core support for these LEDs.

On the EDB93xx development boards, the rdled is connected to
an external reset circuit.  Turning this led on for an extended
amount of time will cause the circuit to issue a manual reset.

Refer to Cirrus App Note AN258 for more information.

	http://www.cirrus.com/en/pubs/appNote/AN258REV2.pdf

This led can be safely used as the system heartbeat with the
ledtrig-heartbeat driver.

	echo heartbeat > /sys/class/leds/platform:rdled/trigger

The grled can be used for any desired purpose.

Tested-by: Matthieu Crapet <mcrapet@gmail.com>
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ep93xx/core.c | 30 ++++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index b390c35f8bc..2b58df0184c 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -22,6 +22,7 @@
 #include <linux/timex.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
+#include <linux/leds.h>
 #include <linux/termios.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/serial.h>
@@ -568,6 +569,34 @@ void __init ep93xx_register_i2c(struct i2c_board_info *devices, int num)
 	platform_device_register(&ep93xx_i2c_device);
 }
 
+
+/*************************************************************************
+ * EP93xx LEDs
+ *************************************************************************/
+static struct gpio_led ep93xx_led_pins[] = {
+	{
+		.name			= "platform:grled",
+		.gpio			= EP93XX_GPIO_LINE_GRLED,
+	}, {
+		.name			= "platform:rdled",
+		.gpio			= EP93XX_GPIO_LINE_RDLED,
+	},
+};
+
+static struct gpio_led_platform_data ep93xx_led_data = {
+	.num_leds	= ARRAY_SIZE(ep93xx_led_pins),
+	.leds		= ep93xx_led_pins,
+};
+
+static struct platform_device ep93xx_leds = {
+	.name		= "leds-gpio",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &ep93xx_led_data,
+	},
+};
+
+
 extern void ep93xx_gpio_init(void);
 
 void __init ep93xx_init_devices(void)
@@ -583,4 +612,5 @@ void __init ep93xx_init_devices(void)
 
 	platform_device_register(&ep93xx_rtc_device);
 	platform_device_register(&ep93xx_ohci_device);
+	platform_device_register(&ep93xx_leds);
 }
-- 
cgit v1.2.3


From 4bf1fa5a34aa2dd0d2cc58f0fc213a2e22d007a4 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= <u.kleine-koenig@pengutronix.de>
Date: Tue, 21 Jul 2009 09:56:27 +0100
Subject: [ARM] 5613/1: implement CALLER_ADDRESSx
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

As __builtin_return_address(n) doesn't work for ARM with n > 0, the
kernel needs its own implementation.

This fixes many warnings saying:

	warning: unsupported argument to '__builtin_return_address'

The new methods and walk_stackframe must not be instrumented because
CALLER_ADDRESSx is used in the various tracers and tracing the tracer is
a bad idea.

What's currently missing is an implementation using unwind tables.  This
is not fatal though, it's just that the tracers don't get enough
information to be really useful.

Note that if both ARM_UNWIND and FRAME_POINTER are enabled,
walk_stackframe uses unwind information.  So in this case the same
implementation is used as when FRAME_POINTER is disabled.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/ftrace.h    | 34 +++++++++++++++++++
 arch/arm/kernel/Makefile         |  4 ++-
 arch/arm/kernel/return_address.c | 71 ++++++++++++++++++++++++++++++++++++++++
 arch/arm/kernel/stacktrace.c     |  4 +--
 4 files changed, 110 insertions(+), 3 deletions(-)
 create mode 100644 arch/arm/kernel/return_address.c

(limited to 'arch')

diff --git a/arch/arm/include/asm/ftrace.h b/arch/arm/include/asm/ftrace.h
index 39c8bc1a006..d74265cffd8 100644
--- a/arch/arm/include/asm/ftrace.h
+++ b/arch/arm/include/asm/ftrace.h
@@ -11,4 +11,38 @@ extern void mcount(void);
 
 #endif
 
+#ifndef __ASSEMBLY__
+
+#if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND)
+/*
+ * return_address uses walk_stackframe to do it's work.  If both
+ * CONFIG_FRAME_POINTER=y and CONFIG_ARM_UNWIND=y walk_stackframe uses unwind
+ * information.  For this to work in the function tracer many functions would
+ * have to be marked with __notrace.  So for now just depend on
+ * !CONFIG_ARM_UNWIND.
+ */
+
+void *return_address(unsigned int);
+
+#else
+
+extern inline void *return_address(unsigned int level)
+{
+	return NULL;
+}
+
+#endif
+
+#define HAVE_ARCH_CALLER_ADDR
+
+#define CALLER_ADDR0 ((unsigned long)__builtin_return_address(0))
+#define CALLER_ADDR1 ((unsigned long)return_address(1))
+#define CALLER_ADDR2 ((unsigned long)return_address(2))
+#define CALLER_ADDR3 ((unsigned long)return_address(3))
+#define CALLER_ADDR4 ((unsigned long)return_address(4))
+#define CALLER_ADDR5 ((unsigned long)return_address(5))
+#define CALLER_ADDR6 ((unsigned long)return_address(6))
+
+#endif /* ifndef __ASSEMBLY__ */
+
 #endif /* _ASM_ARM_FTRACE */
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index ff89d0b3abc..3213c9382b1 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -8,10 +8,12 @@ ifdef CONFIG_DYNAMIC_FTRACE
 CFLAGS_REMOVE_ftrace.o = -pg
 endif
 
+CFLAGS_REMOVE_return_address.o = -pg
+
 # Object file lists.
 
 obj-y		:= compat.o elf.o entry-armv.o entry-common.o irq.o \
-		   process.o ptrace.o setup.o signal.o \
+		   process.o ptrace.o return_address.o setup.o signal.o \
 		   sys_arm.o stacktrace.o time.o traps.o
 
 obj-$(CONFIG_ISA_DMA_API)	+= dma.o
diff --git a/arch/arm/kernel/return_address.c b/arch/arm/kernel/return_address.c
new file mode 100644
index 00000000000..df246da4cec
--- /dev/null
+++ b/arch/arm/kernel/return_address.c
@@ -0,0 +1,71 @@
+/*
+ * arch/arm/kernel/return_address.c
+ *
+ * Copyright (C) 2009 Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ * for Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#include <linux/module.h>
+
+#if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND)
+#include <linux/sched.h>
+
+#include <asm/stacktrace.h>
+
+struct return_address_data {
+	unsigned int level;
+	void *addr;
+};
+
+static int save_return_addr(struct stackframe *frame, void *d)
+{
+	struct return_address_data *data = d;
+
+	if (!data->level) {
+		data->addr = (void *)frame->lr;
+
+		return 1;
+	} else {
+		--data->level;
+		return 0;
+	}
+}
+
+void *return_address(unsigned int level)
+{
+	struct return_address_data data;
+	struct stackframe frame;
+	register unsigned long current_sp asm ("sp");
+
+	data.level = level + 1;
+
+	frame.fp = (unsigned long)__builtin_frame_address(0);
+	frame.sp = current_sp;
+	frame.lr = (unsigned long)__builtin_return_address(0);
+	frame.pc = (unsigned long)return_address;
+
+	walk_stackframe(&frame, save_return_addr, &data);
+
+	if (!data.level)
+		return data.addr;
+	else
+		return NULL;
+}
+
+#else /* if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND) */
+
+#if defined(CONFIG_ARM_UNWIND)
+#warning "TODO: return_address should use unwind tables"
+#endif
+
+void *return_address(unsigned int level)
+{
+	return NULL;
+}
+
+#endif /* if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND) / else */
+
+EXPORT_SYMBOL_GPL(return_address);
diff --git a/arch/arm/kernel/stacktrace.c b/arch/arm/kernel/stacktrace.c
index 9f444e5cc16..20b7411e47f 100644
--- a/arch/arm/kernel/stacktrace.c
+++ b/arch/arm/kernel/stacktrace.c
@@ -21,7 +21,7 @@
  * Note that with framepointer enabled, even the leaf functions have the same
  * prologue and epilogue, therefore we can ignore the LR value in this case.
  */
-int unwind_frame(struct stackframe *frame)
+int notrace unwind_frame(struct stackframe *frame)
 {
 	unsigned long high, low;
 	unsigned long fp = frame->fp;
@@ -43,7 +43,7 @@ int unwind_frame(struct stackframe *frame)
 }
 #endif
 
-void walk_stackframe(struct stackframe *frame,
+void notrace walk_stackframe(struct stackframe *frame,
 		     int (*fn)(struct stackframe *, void *), void *data)
 {
 	while (1) {
-- 
cgit v1.2.3


From 3162534069597e34dd0ac9eb711be8dc23835ae7 Mon Sep 17 00:00:00 2001
From: Joseph Cihula <joseph.cihula@intel.com>
Date: Tue, 30 Jun 2009 19:30:59 -0700
Subject: x86, intel_txt: Intel TXT boot support

This patch adds kernel configuration and boot support for Intel Trusted
Execution Technology (Intel TXT).

Intel's technology for safer computing, Intel Trusted Execution
Technology (Intel TXT), defines platform-level enhancements that
provide the building blocks for creating trusted platforms.

Intel TXT was formerly known by the code name LaGrande Technology (LT).

Intel TXT in Brief:
o  Provides dynamic root of trust for measurement (DRTM)
o  Data protection in case of improper shutdown
o  Measurement and verification of launched environment

Intel TXT is part of the vPro(TM) brand and is also available some
non-vPro systems.  It is currently available on desktop systems based on
the Q35, X38, Q45, and Q43 Express chipsets (e.g. Dell Optiplex 755, HP
dc7800, etc.) and mobile systems based on the GM45, PM45, and GS45
Express chipsets.

For more information, see http://www.intel.com/technology/security/.
This site also has a link to the Intel TXT MLE Developers Manual, which
has been updated for the new released platforms.

A much more complete description of how these patches support TXT, how to
configure a system for it, etc. is in the Documentation/intel_txt.txt file
in this patch.

This patch provides the TXT support routines for complete functionality,
documentation for TXT support and for the changes to the boot_params structure,
and boot detection of a TXT launch.  Attempts to shutdown (reboot, Sx) the system
will result in platform resets; subsequent patches will support these shutdown modes
properly.

 Documentation/intel_txt.txt      |  210 +++++++++++++++++++++
 Documentation/x86/zero-page.txt  |    1
 arch/x86/include/asm/bootparam.h |    3
 arch/x86/include/asm/fixmap.h    |    3
 arch/x86/include/asm/tboot.h     |  197 ++++++++++++++++++++
 arch/x86/kernel/Makefile         |    1
 arch/x86/kernel/setup.c          |    4
 arch/x86/kernel/tboot.c          |  379 +++++++++++++++++++++++++++++++++++++++
 security/Kconfig                 |   30 +++
 9 files changed, 827 insertions(+), 1 deletion(-)

Signed-off-by: Joseph Cihula <joseph.cihula@intel.com>
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Gang Wei <gang.wei@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/include/asm/bootparam.h |   3 +-
 arch/x86/include/asm/fixmap.h    |   3 +
 arch/x86/include/asm/tboot.h     | 197 ++++++++++++++++++++
 arch/x86/kernel/Makefile         |   1 +
 arch/x86/kernel/setup.c          |   4 +
 arch/x86/kernel/tboot.c          | 379 +++++++++++++++++++++++++++++++++++++++
 6 files changed, 586 insertions(+), 1 deletion(-)
 create mode 100644 arch/x86/include/asm/tboot.h
 create mode 100644 arch/x86/kernel/tboot.c

(limited to 'arch')

diff --git a/arch/x86/include/asm/bootparam.h b/arch/x86/include/asm/bootparam.h
index 1724e8de317..6ca20218dd7 100644
--- a/arch/x86/include/asm/bootparam.h
+++ b/arch/x86/include/asm/bootparam.h
@@ -85,7 +85,8 @@ struct efi_info {
 struct boot_params {
 	struct screen_info screen_info;			/* 0x000 */
 	struct apm_bios_info apm_bios_info;		/* 0x040 */
-	__u8  _pad2[12];				/* 0x054 */
+	__u8  _pad2[4];					/* 0x054 */
+	__u64  tboot_addr;				/* 0x058 */
 	struct ist_info ist_info;			/* 0x060 */
 	__u8  _pad3[16];				/* 0x070 */
 	__u8  hd0_info[16];	/* obsolete! */		/* 0x080 */
diff --git a/arch/x86/include/asm/fixmap.h b/arch/x86/include/asm/fixmap.h
index 7b2d71df39a..14f9890eb49 100644
--- a/arch/x86/include/asm/fixmap.h
+++ b/arch/x86/include/asm/fixmap.h
@@ -131,6 +131,9 @@ enum fixed_addresses {
 #endif
 #ifdef CONFIG_X86_32
 	FIX_WP_TEST,
+#endif
+#ifdef CONFIG_INTEL_TXT
+	FIX_TBOOT_BASE,
 #endif
 	__end_of_fixed_addresses
 };
diff --git a/arch/x86/include/asm/tboot.h b/arch/x86/include/asm/tboot.h
new file mode 100644
index 00000000000..b13929d4e5f
--- /dev/null
+++ b/arch/x86/include/asm/tboot.h
@@ -0,0 +1,197 @@
+/*
+ * tboot.h: shared data structure with tboot and kernel and functions
+ *          used by kernel for runtime support of Intel(R) Trusted
+ *          Execution Technology
+ *
+ * Copyright (c) 2006-2009, Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#ifndef _ASM_TBOOT_H
+#define _ASM_TBOOT_H
+
+#include <acpi/acpi.h>
+
+/* these must have the values from 0-5 in this order */
+enum {
+	TB_SHUTDOWN_REBOOT = 0,
+	TB_SHUTDOWN_S5,
+	TB_SHUTDOWN_S4,
+	TB_SHUTDOWN_S3,
+	TB_SHUTDOWN_HALT,
+	TB_SHUTDOWN_WFS
+};
+
+#ifdef CONFIG_INTEL_TXT
+
+/* used to communicate between tboot and the launched kernel */
+
+#define TB_KEY_SIZE             64   /* 512 bits */
+
+#define MAX_TB_MAC_REGIONS      32
+
+struct tboot_mac_region {
+	u64  start;         /* must be 64 byte -aligned */
+	u32  size;          /* must be 64 byte -granular */
+} __packed;
+
+/* GAS - Generic Address Structure (ACPI 2.0+) */
+struct tboot_acpi_generic_address {
+	u8  space_id;
+	u8  bit_width;
+	u8  bit_offset;
+	u8  access_width;
+	u64 address;
+} __packed;
+
+/*
+ * combines Sx info from FADT and FACS tables per ACPI 2.0+ spec
+ * (http://www.acpi.info/)
+ */
+struct tboot_acpi_sleep_info {
+	struct tboot_acpi_generic_address pm1a_cnt_blk;
+	struct tboot_acpi_generic_address pm1b_cnt_blk;
+	struct tboot_acpi_generic_address pm1a_evt_blk;
+	struct tboot_acpi_generic_address pm1b_evt_blk;
+	u16 pm1a_cnt_val;
+	u16 pm1b_cnt_val;
+	u64 wakeup_vector;
+	u32 vector_width;
+	u64 kernel_s3_resume_vector;
+} __packed;
+
+/*
+ * shared memory page used for communication between tboot and kernel
+ */
+struct tboot {
+	/*
+	 * version 3+ fields:
+	 */
+
+	/* TBOOT_UUID */
+	u8 uuid[16];
+
+	/* version number: 5 is current */
+	u32 version;
+
+	/* physical addr of tb_log_t log */
+	u32 log_addr;
+
+	/*
+	 * physical addr of entry point for tboot shutdown and
+	 * type of shutdown (TB_SHUTDOWN_*) being requested
+	 */
+	u32 shutdown_entry;
+	u32 shutdown_type;
+
+	/* kernel-specified ACPI info for Sx shutdown */
+	struct tboot_acpi_sleep_info acpi_sinfo;
+
+	/* tboot location in memory (physical) */
+	u32 tboot_base;
+	u32 tboot_size;
+
+	/* memory regions (phys addrs) for tboot to MAC on S3 */
+	u8 num_mac_regions;
+	struct tboot_mac_region mac_regions[MAX_TB_MAC_REGIONS];
+
+
+	/*
+	 * version 4+ fields:
+	 */
+
+	/* symmetric key for use by kernel; will be encrypted on S3 */
+	u8 s3_key[TB_KEY_SIZE];
+
+
+	/*
+	 * version 5+ fields:
+	 */
+
+	/* used to 4byte-align num_in_wfs */
+	u8 reserved_align[3];
+
+	/* number of processors in wait-for-SIPI */
+	u32 num_in_wfs;
+} __packed;
+
+/*
+ * UUID for tboot data struct to facilitate matching
+ * defined as {663C8DFF-E8B3-4b82-AABF-19EA4D057A08} by tboot, which is
+ * represented as {} in the char array used here
+ */
+#define TBOOT_UUID	{0xff, 0x8d, 0x3c, 0x66, 0xb3, 0xe8, 0x82, 0x4b, 0xbf,\
+			 0xaa, 0x19, 0xea, 0x4d, 0x5, 0x7a, 0x8}
+
+extern struct tboot *tboot;
+
+static inline int tboot_enabled(void)
+{
+	return tboot != NULL;
+}
+
+extern void tboot_probe(void);
+extern void tboot_create_trampoline(void);
+extern void tboot_shutdown(u32 shutdown_type);
+extern void tboot_sleep(u8 sleep_state, u32 pm1a_control, u32 pm1b_control);
+extern int tboot_wait_for_aps(int num_aps);
+extern struct acpi_table_header *tboot_get_dmar_table(
+				      struct acpi_table_header *dmar_tbl);
+extern int tboot_force_iommu(void);
+
+#else     /* CONFIG_INTEL_TXT */
+
+static inline int tboot_enabled(void)
+{
+	return 0;
+}
+
+static inline void tboot_probe(void)
+{
+}
+
+static inline void tboot_create_trampoline(void)
+{
+}
+
+static inline void tboot_shutdown(u32 shutdown_type)
+{
+}
+
+static inline void tboot_sleep(u8 sleep_state, u32 pm1a_control,
+			       u32 pm1b_control)
+{
+}
+
+static inline int tboot_wait_for_aps(int num_aps)
+{
+	return 0;
+}
+
+static inline struct acpi_table_header *tboot_get_dmar_table(
+					struct acpi_table_header *dmar_tbl)
+{
+	return dmar_tbl;
+}
+
+static inline int tboot_force_iommu(void)
+{
+	return 0;
+}
+
+#endif /* !CONFIG_INTEL_TXT */
+
+#endif /* _ASM_TBOOT_H */
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 430d5b24af7..832cb838cb4 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -52,6 +52,7 @@ obj-$(CONFIG_X86_DS_SELFTEST)		+= ds_selftest.o
 obj-$(CONFIG_X86_32)		+= tls.o
 obj-$(CONFIG_IA32_EMULATION)	+= tls.o
 obj-y				+= step.o
+obj-$(CONFIG_INTEL_TXT)		+= tboot.o
 obj-$(CONFIG_STACKTRACE)	+= stacktrace.o
 obj-y				+= cpu/
 obj-y				+= acpi/
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index de2cab13284..80d6e9e3248 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -145,6 +145,8 @@ struct boot_params __initdata boot_params;
 struct boot_params boot_params;
 #endif
 
+#include <asm/tboot.h>
+
 /*
  * Machine setup..
  */
@@ -964,6 +966,8 @@ void __init setup_arch(char **cmdline_p)
 	paravirt_pagetable_setup_done(swapper_pg_dir);
 	paravirt_post_allocator_init();
 
+	tboot_probe();
+
 #ifdef CONFIG_X86_64
 	map_vsyscall();
 #endif
diff --git a/arch/x86/kernel/tboot.c b/arch/x86/kernel/tboot.c
new file mode 100644
index 00000000000..263591afd29
--- /dev/null
+++ b/arch/x86/kernel/tboot.c
@@ -0,0 +1,379 @@
+/*
+ * tboot.c: main implementation of helper functions used by kernel for
+ *          runtime support of Intel(R) Trusted Execution Technology
+ *
+ * Copyright (c) 2006-2009, Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#include <linux/dma_remapping.h>
+#include <linux/init_task.h>
+#include <linux/spinlock.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/dmar.h>
+#include <linux/pfn.h>
+#include <linux/mm.h>
+
+#include <asm/trampoline.h>
+#include <asm/processor.h>
+#include <asm/bootparam.h>
+#include <asm/pgtable.h>
+#include <asm/pgalloc.h>
+#include <asm/setup.h>
+#include <asm/tboot.h>
+#include <asm/e820.h>
+#include <asm/io.h>
+
+#include "acpi/realmode/wakeup.h"
+
+/* Global pointer to shared data; NULL means no measured launch. */
+struct tboot *tboot __read_mostly;
+
+/* timeout for APs (in secs) to enter wait-for-SIPI state during shutdown */
+#define AP_WAIT_TIMEOUT		1
+
+#undef pr_fmt
+#define pr_fmt(fmt)	"tboot: " fmt
+
+static u8 tboot_uuid[16] __initdata = TBOOT_UUID;
+
+void __init tboot_probe(void)
+{
+	/* Look for valid page-aligned address for shared page. */
+	if (!boot_params.tboot_addr)
+		return;
+	/*
+	 * also verify that it is mapped as we expect it before calling
+	 * set_fixmap(), to reduce chance of garbage value causing crash
+	 */
+	if (!e820_any_mapped(boot_params.tboot_addr,
+			     boot_params.tboot_addr, E820_RESERVED)) {
+		pr_warning("non-0 tboot_addr but it is not of type E820_RESERVED\n");
+		return;
+	}
+
+	/* only a natively booted kernel should be using TXT */
+	if (paravirt_enabled()) {
+		pr_warning("non-0 tboot_addr but pv_ops is enabled\n");
+		return;
+	}
+
+	/* Map and check for tboot UUID. */
+	set_fixmap(FIX_TBOOT_BASE, boot_params.tboot_addr);
+	tboot = (struct tboot *)fix_to_virt(FIX_TBOOT_BASE);
+	if (memcmp(&tboot_uuid, &tboot->uuid, sizeof(tboot->uuid))) {
+		pr_warning("tboot at 0x%llx is invalid\n",
+			   boot_params.tboot_addr);
+		tboot = NULL;
+		return;
+	}
+	if (tboot->version < 5) {
+		pr_warning("tboot version is invalid: %u\n", tboot->version);
+		tboot = NULL;
+		return;
+	}
+
+	pr_info("found shared page at phys addr 0x%llx:\n",
+		boot_params.tboot_addr);
+	pr_debug("version: %d\n", tboot->version);
+	pr_debug("log_addr: 0x%08x\n", tboot->log_addr);
+	pr_debug("shutdown_entry: 0x%x\n", tboot->shutdown_entry);
+	pr_debug("tboot_base: 0x%08x\n", tboot->tboot_base);
+	pr_debug("tboot_size: 0x%x\n", tboot->tboot_size);
+}
+
+static pgd_t *tboot_pg_dir;
+static struct mm_struct tboot_mm = {
+	.mm_rb          = RB_ROOT,
+	.pgd            = swapper_pg_dir,
+	.mm_users       = ATOMIC_INIT(2),
+	.mm_count       = ATOMIC_INIT(1),
+	.mmap_sem       = __RWSEM_INITIALIZER(init_mm.mmap_sem),
+	.page_table_lock =  __SPIN_LOCK_UNLOCKED(init_mm.page_table_lock),
+	.mmlist         = LIST_HEAD_INIT(init_mm.mmlist),
+	.cpu_vm_mask    = CPU_MASK_ALL,
+};
+
+static inline void switch_to_tboot_pt(void)
+{
+	write_cr3(virt_to_phys(tboot_pg_dir));
+}
+
+static int map_tboot_page(unsigned long vaddr, unsigned long pfn,
+			  pgprot_t prot)
+{
+	pgd_t *pgd;
+	pud_t *pud;
+	pmd_t *pmd;
+	pte_t *pte;
+
+	pgd = pgd_offset(&tboot_mm, vaddr);
+	pud = pud_alloc(&tboot_mm, pgd, vaddr);
+	if (!pud)
+		return -1;
+	pmd = pmd_alloc(&tboot_mm, pud, vaddr);
+	if (!pmd)
+		return -1;
+	pte = pte_alloc_map(&tboot_mm, pmd, vaddr);
+	if (!pte)
+		return -1;
+	set_pte_at(&tboot_mm, vaddr, pte, pfn_pte(pfn, prot));
+	pte_unmap(pte);
+	return 0;
+}
+
+static int map_tboot_pages(unsigned long vaddr, unsigned long start_pfn,
+			   unsigned long nr)
+{
+	/* Reuse the original kernel mapping */
+	tboot_pg_dir = pgd_alloc(&tboot_mm);
+	if (!tboot_pg_dir)
+		return -1;
+
+	for (; nr > 0; nr--, vaddr += PAGE_SIZE, start_pfn++) {
+		if (map_tboot_page(vaddr, start_pfn, PAGE_KERNEL_EXEC))
+			return -1;
+	}
+
+	return 0;
+}
+
+void tboot_create_trampoline(void)
+{
+	u32 map_base, map_size;
+
+	if (!tboot_enabled())
+		return;
+
+	/* Create identity map for tboot shutdown code. */
+	map_base = PFN_DOWN(tboot->tboot_base);
+	map_size = PFN_UP(tboot->tboot_size);
+	if (map_tboot_pages(map_base << PAGE_SHIFT, map_base, map_size))
+		panic("tboot: Error mapping tboot pages (mfns) @ 0x%x, 0x%x\n", map_base, map_size);
+}
+
+static void set_mac_regions(void)
+{
+	tboot->num_mac_regions = 3;
+	/* S3 resume code */
+	tboot->mac_regions[0].start = PFN_PHYS(PFN_DOWN(acpi_wakeup_address));
+	tboot->mac_regions[0].size = PFN_UP(WAKEUP_SIZE) << PAGE_SHIFT;
+	/* AP trampoline code */
+	tboot->mac_regions[1].start =
+			PFN_PHYS(PFN_DOWN(virt_to_phys(trampoline_base)));
+	tboot->mac_regions[1].size = PFN_UP(TRAMPOLINE_SIZE) << PAGE_SHIFT;
+	/* kernel code + data + bss */
+	tboot->mac_regions[2].start = PFN_PHYS(PFN_DOWN(virt_to_phys(&_text)));
+	tboot->mac_regions[2].size = PFN_PHYS(PFN_UP(virt_to_phys(&_end))) -
+				     PFN_PHYS(PFN_DOWN(virt_to_phys(&_text)));
+}
+
+void tboot_shutdown(u32 shutdown_type)
+{
+	void (*shutdown)(void);
+
+	if (!tboot_enabled())
+		return;
+
+	/*
+	 * if we're being called before the 1:1 mapping is set up then just
+	 * return and let the normal shutdown happen; this should only be
+	 * due to very early panic()
+	 */
+	if (!tboot_pg_dir)
+		return;
+
+	/* if this is S3 then set regions to MAC */
+	if (shutdown_type == TB_SHUTDOWN_S3)
+		set_mac_regions();
+
+	tboot->shutdown_type = shutdown_type;
+
+	switch_to_tboot_pt();
+
+	shutdown = (void(*)(void))(unsigned long)tboot->shutdown_entry;
+	shutdown();
+
+	/* should not reach here */
+	while (1)
+		halt();
+}
+
+static void tboot_copy_fadt(const struct acpi_table_fadt *fadt)
+{
+#define TB_COPY_GAS(tbg, g)			\
+	tbg.space_id     = g.space_id;		\
+	tbg.bit_width    = g.bit_width;		\
+	tbg.bit_offset   = g.bit_offset;	\
+	tbg.access_width = g.access_width;	\
+	tbg.address      = g.address;
+
+	TB_COPY_GAS(tboot->acpi_sinfo.pm1a_cnt_blk, fadt->xpm1a_control_block);
+	TB_COPY_GAS(tboot->acpi_sinfo.pm1b_cnt_blk, fadt->xpm1b_control_block);
+	TB_COPY_GAS(tboot->acpi_sinfo.pm1a_evt_blk, fadt->xpm1a_event_block);
+	TB_COPY_GAS(tboot->acpi_sinfo.pm1b_evt_blk, fadt->xpm1b_event_block);
+
+	/*
+	 * We need phys addr of waking vector, but can't use virt_to_phys() on
+	 * &acpi_gbl_FACS because it is ioremap'ed, so calc from FACS phys
+	 * addr.
+	 */
+	tboot->acpi_sinfo.wakeup_vector = fadt->facs +
+		offsetof(struct acpi_table_facs, firmware_waking_vector);
+}
+
+void tboot_sleep(u8 sleep_state, u32 pm1a_control, u32 pm1b_control)
+{
+	static u32 acpi_shutdown_map[ACPI_S_STATE_COUNT] = {
+		/* S0,1,2: */ -1, -1, -1,
+		/* S3: */ TB_SHUTDOWN_S3,
+		/* S4: */ TB_SHUTDOWN_S4,
+		/* S5: */ TB_SHUTDOWN_S5 };
+
+	if (!tboot_enabled())
+		return;
+
+	tboot_copy_fadt(&acpi_gbl_FADT);
+	tboot->acpi_sinfo.pm1a_cnt_val = pm1a_control;
+	tboot->acpi_sinfo.pm1b_cnt_val = pm1b_control;
+	/* we always use the 32b wakeup vector */
+	tboot->acpi_sinfo.vector_width = 32;
+	tboot->acpi_sinfo.kernel_s3_resume_vector = acpi_wakeup_address;
+
+	if (sleep_state >= ACPI_S_STATE_COUNT ||
+	    acpi_shutdown_map[sleep_state] == -1) {
+		pr_warning("unsupported sleep state 0x%x\n", sleep_state);
+		return;
+	}
+
+	tboot_shutdown(acpi_shutdown_map[sleep_state]);
+}
+
+int tboot_wait_for_aps(int num_aps)
+{
+	unsigned long timeout;
+
+	if (!tboot_enabled())
+		return 0;
+
+	timeout = jiffies + AP_WAIT_TIMEOUT*HZ;
+	while (atomic_read((atomic_t *)&tboot->num_in_wfs) != num_aps &&
+	       time_before(jiffies, timeout))
+		cpu_relax();
+
+	return time_before(jiffies, timeout) ? 0 : 1;
+}
+
+/*
+ * TXT configuration registers (offsets from TXT_{PUB, PRIV}_CONFIG_REGS_BASE)
+ */
+
+#define TXT_PUB_CONFIG_REGS_BASE       0xfed30000
+#define TXT_PRIV_CONFIG_REGS_BASE      0xfed20000
+
+/* # pages for each config regs space - used by fixmap */
+#define NR_TXT_CONFIG_PAGES     ((TXT_PUB_CONFIG_REGS_BASE -                \
+				  TXT_PRIV_CONFIG_REGS_BASE) >> PAGE_SHIFT)
+
+/* offsets from pub/priv config space */
+#define TXTCR_HEAP_BASE             0x0300
+#define TXTCR_HEAP_SIZE             0x0308
+
+#define SHA1_SIZE      20
+
+struct sha1_hash {
+	u8 hash[SHA1_SIZE];
+};
+
+struct sinit_mle_data {
+	u32               version;             /* currently 6 */
+	struct sha1_hash  bios_acm_id;
+	u32               edx_senter_flags;
+	u64               mseg_valid;
+	struct sha1_hash  sinit_hash;
+	struct sha1_hash  mle_hash;
+	struct sha1_hash  stm_hash;
+	struct sha1_hash  lcp_policy_hash;
+	u32               lcp_policy_control;
+	u32               rlp_wakeup_addr;
+	u32               reserved;
+	u32               num_mdrs;
+	u32               mdrs_off;
+	u32               num_vtd_dmars;
+	u32               vtd_dmars_off;
+} __packed;
+
+struct acpi_table_header *tboot_get_dmar_table(struct acpi_table_header *dmar_tbl)
+{
+	void *heap_base, *heap_ptr, *config;
+
+	if (!tboot_enabled())
+		return dmar_tbl;
+
+	/*
+	 * ACPI tables may not be DMA protected by tboot, so use DMAR copy
+	 * SINIT saved in SinitMleData in TXT heap (which is DMA protected)
+	 */
+
+	/* map config space in order to get heap addr */
+	config = ioremap(TXT_PUB_CONFIG_REGS_BASE, NR_TXT_CONFIG_PAGES *
+			 PAGE_SIZE);
+	if (!config)
+		return NULL;
+
+	/* now map TXT heap */
+	heap_base = ioremap(*(u64 *)(config + TXTCR_HEAP_BASE),
+			    *(u64 *)(config + TXTCR_HEAP_SIZE));
+	iounmap(config);
+	if (!heap_base)
+		return NULL;
+
+	/* walk heap to SinitMleData */
+	/* skip BiosData */
+	heap_ptr = heap_base + *(u64 *)heap_base;
+	/* skip OsMleData */
+	heap_ptr += *(u64 *)heap_ptr;
+	/* skip OsSinitData */
+	heap_ptr += *(u64 *)heap_ptr;
+	/* now points to SinitMleDataSize; set to SinitMleData */
+	heap_ptr += sizeof(u64);
+	/* get addr of DMAR table */
+	dmar_tbl = (struct acpi_table_header *)(heap_ptr +
+		   ((struct sinit_mle_data *)heap_ptr)->vtd_dmars_off -
+		   sizeof(u64));
+
+	/* don't unmap heap because dmar.c needs access to this */
+
+	return dmar_tbl;
+}
+
+int tboot_force_iommu(void)
+{
+	if (!tboot_enabled())
+		return 0;
+
+	if (no_iommu || swiotlb || dmar_disabled)
+		pr_warning("Forcing Intel-IOMMU to enabled\n");
+
+	dmar_disabled = 0;
+#ifdef CONFIG_SWIOTLB
+	swiotlb = 0;
+#endif
+	no_iommu = 0;
+
+	return 1;
+}
-- 
cgit v1.2.3


From 840c2baf2d4cdf35ecc3b7fcbba7740f97de30a4 Mon Sep 17 00:00:00 2001
From: Joseph Cihula <joseph.cihula@intel.com>
Date: Tue, 30 Jun 2009 19:31:02 -0700
Subject: x86, intel_txt: Intel TXT reboot/halt shutdown support

Support for graceful handling of kernel reboots after an Intel(R) TXT launch.

Without this patch, attempting to reboot or halt the system will cause the
TXT hardware to lock memory upon system restart because the secrets-in-memory
flag that was set on launch was never cleared.  This will in turn cause BIOS
to execute a TXT Authenticated Code Module (ACM) that will scrub all of memory
and then unlock it.  Depending on the amount of memory in the system and its type,
this may take some time.

This patch creates a 1:1 address mapping to the tboot module and then calls back
into tboot so that it may properly and securely clean up system state and clear
the secrets-in-memory flag.  When it has completed these steps, the tboot module
will reboot or halt the system.

 arch/x86/kernel/reboot.c |    8 ++++++++
 init/main.c              |    3 +++
 2 files changed, 11 insertions(+)

Signed-off-by: Joseph Cihula <joseph.cihula@intel.com>
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/kernel/reboot.c | 8 ++++++++
 1 file changed, 8 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index d2d1ce8170f..9de01c5d979 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -24,6 +24,8 @@
 # include <asm/iommu.h>
 #endif
 
+#include <asm/tboot.h>
+
 /*
  * Power off function, if any
  */
@@ -460,6 +462,8 @@ static void native_machine_emergency_restart(void)
 	if (reboot_emergency)
 		emergency_vmx_disable_all();
 
+	tboot_shutdown(TB_SHUTDOWN_REBOOT);
+
 	/* Tell the BIOS if we want cold or warm reboot */
 	*((unsigned short *)__va(0x472)) = reboot_mode;
 
@@ -586,6 +590,8 @@ static void native_machine_halt(void)
 	/* stop other cpus and apics */
 	machine_shutdown();
 
+	tboot_shutdown(TB_SHUTDOWN_HALT);
+
 	/* stop this cpu */
 	stop_this_cpu(NULL);
 }
@@ -597,6 +603,8 @@ static void native_machine_power_off(void)
 			machine_shutdown();
 		pm_power_off();
 	}
+	/* a fallback in case there is no PM info available */
+	tboot_shutdown(TB_SHUTDOWN_HALT);
 }
 
 struct machine_ops machine_ops = {
-- 
cgit v1.2.3


From 86886e55b273f565935491816c7c96b82469d4f8 Mon Sep 17 00:00:00 2001
From: Joseph Cihula <joseph.cihula@intel.com>
Date: Tue, 30 Jun 2009 19:31:07 -0700
Subject: x86, intel_txt: Intel TXT Sx shutdown support

Support for graceful handling of sleep states (S3/S4/S5) after an Intel(R) TXT launch.

Without this patch, attempting to place the system in one of the ACPI sleep
states (S3/S4/S5) will cause the TXT hardware to treat this as an attack and
will cause a system reset, with memory locked.  Not only may the subsequent
memory scrub take some time, but the platform will be unable to enter the
requested power state.

This patch calls back into the tboot so that it may properly and securely clean
up system state and clear the secrets-in-memory flag, after which it will place
the system into the requested sleep state using ACPI information passed by the kernel.

 arch/x86/kernel/smpboot.c     |    2 ++
 drivers/acpi/acpica/hwsleep.c |    3 +++
 kernel/cpu.c                  |    7 ++++++-
 3 files changed, 11 insertions(+), 1 deletion(-)

Signed-off-by: Joseph Cihula <joseph.cihula@intel.com>
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/kernel/smpboot.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 2fecda69ee6..61cc40887c4 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -62,6 +62,7 @@
 #include <asm/vmi.h>
 #include <asm/apic.h>
 #include <asm/setup.h>
+#include <asm/tboot.h>
 #include <asm/uv/uv.h>
 #include <linux/mc146818rtc.h>
 
@@ -1317,6 +1318,7 @@ void play_dead_common(void)
 void native_play_dead(void)
 {
 	play_dead_common();
+	tboot_shutdown(TB_SHUTDOWN_WFS);
 	wbinvd_halt();
 }
 
-- 
cgit v1.2.3


From d7aacaddcac3971e33cf52d7e610c06696cb347f Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Wed, 8 Jul 2009 13:21:31 +0200
Subject: Driver Core: Add platform device arch data V3

Allow architecture specific data in struct platform_device V3.

With this patch struct pdev_archdata is added to struct
platform_device, similar to struct dev_archdata in found in
struct device. Useful for architecture code that needs to
keep extra data associated with each platform device.

Struct pdev_archdata is different from dev.platform_data, the
convention is that dev.platform_data points to driver-specific
data. It may or may not be required by the driver. The format
of this depends on driver but is the same across architectures.

The structure pdev_archdata is a place for architecture specific
data. This data is handled by architecture specific code (for
example runtime PM), and since it is architecture specific it
should _never_ be touched by device driver code. Exactly like
struct dev_archdata but for platform devices.

[rjw: This change is for power management mostly and that's why it
 goes through the suspend tree.]

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Acked-by: Kevin Hilman <khilman@deeprootsystems.com>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
---
 arch/arm/include/asm/device.h        | 3 +++
 arch/ia64/include/asm/device.h       | 3 +++
 arch/microblaze/include/asm/device.h | 3 +++
 arch/powerpc/include/asm/device.h    | 3 +++
 arch/sparc/include/asm/device.h      | 3 +++
 arch/x86/include/asm/device.h        | 3 +++
 6 files changed, 18 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/include/asm/device.h b/arch/arm/include/asm/device.h
index c61642b4060..9f390ce335c 100644
--- a/arch/arm/include/asm/device.h
+++ b/arch/arm/include/asm/device.h
@@ -12,4 +12,7 @@ struct dev_archdata {
 #endif
 };
 
+struct pdev_archdata {
+};
+
 #endif
diff --git a/arch/ia64/include/asm/device.h b/arch/ia64/include/asm/device.h
index 41ab85d66f3..d66d446b127 100644
--- a/arch/ia64/include/asm/device.h
+++ b/arch/ia64/include/asm/device.h
@@ -15,4 +15,7 @@ struct dev_archdata {
 #endif
 };
 
+struct pdev_archdata {
+};
+
 #endif /* _ASM_IA64_DEVICE_H */
diff --git a/arch/microblaze/include/asm/device.h b/arch/microblaze/include/asm/device.h
index c042830793e..30286db27c1 100644
--- a/arch/microblaze/include/asm/device.h
+++ b/arch/microblaze/include/asm/device.h
@@ -16,6 +16,9 @@ struct dev_archdata {
 	struct device_node	*of_node;
 };
 
+struct pdev_archdata {
+};
+
 #endif /* _ASM_MICROBLAZE_DEVICE_H */
 
 
diff --git a/arch/powerpc/include/asm/device.h b/arch/powerpc/include/asm/device.h
index 7d2277cef09..e3e06e0f7fc 100644
--- a/arch/powerpc/include/asm/device.h
+++ b/arch/powerpc/include/asm/device.h
@@ -30,4 +30,7 @@ dev_archdata_get_node(const struct dev_archdata *ad)
 	return ad->of_node;
 }
 
+struct pdev_archdata {
+};
+
 #endif /* _ASM_POWERPC_DEVICE_H */
diff --git a/arch/sparc/include/asm/device.h b/arch/sparc/include/asm/device.h
index 3702e087df2..f3b85b6b0b7 100644
--- a/arch/sparc/include/asm/device.h
+++ b/arch/sparc/include/asm/device.h
@@ -32,4 +32,7 @@ dev_archdata_get_node(const struct dev_archdata *ad)
 	return ad->prom_node;
 }
 
+struct pdev_archdata {
+};
+
 #endif /* _ASM_SPARC_DEVICE_H */
diff --git a/arch/x86/include/asm/device.h b/arch/x86/include/asm/device.h
index 4994a20acbc..cee34e9ca45 100644
--- a/arch/x86/include/asm/device.h
+++ b/arch/x86/include/asm/device.h
@@ -13,4 +13,7 @@ struct dma_map_ops *dma_ops;
 #endif
 };
 
+struct pdev_archdata {
+};
+
 #endif /* _ASM_X86_DEVICE_H */
-- 
cgit v1.2.3


From 79ee031ff6fd23a1a2a4f783cfc3421885304ce3 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Wed, 8 Jul 2009 13:22:04 +0200
Subject: ARM: Rework omap suspend_late()/resume_early()

This patch reworks platform driver power management code
for omap drivers using late/early legacy callbacks.

The callbacks are converted for CONFIG_SUSPEND like this:
  suspend_late() -> suspend_noirq()
  resume_early() -> resume_noirq()

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
---
 arch/arm/plat-omap/debug-leds.c | 11 +++++++----
 arch/arm/plat-omap/gpio.c       | 14 ++++++++++----
 2 files changed, 17 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-omap/debug-leds.c b/arch/arm/plat-omap/debug-leds.c
index be4eefda476..9395898dd49 100644
--- a/arch/arm/plat-omap/debug-leds.c
+++ b/arch/arm/plat-omap/debug-leds.c
@@ -281,24 +281,27 @@ static int /* __init */ fpga_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int fpga_suspend_late(struct platform_device *pdev, pm_message_t mesg)
+static int fpga_suspend_noirq(struct device *dev)
 {
 	__raw_writew(~0, &fpga->leds);
 	return 0;
 }
 
-static int fpga_resume_early(struct platform_device *pdev)
+static int fpga_resume_noirq(struct device *dev)
 {
 	__raw_writew(~hw_led_state, &fpga->leds);
 	return 0;
 }
 
+static struct dev_pm_ops fpga_dev_pm_ops = {
+	.suspend_noirq = fpga_suspend_noirq,
+	.resume_noirq = fpga_resume_noirq,
+};
 
 static struct platform_driver led_driver = {
 	.driver.name	= "omap_dbg_led",
+	.driver.pm	= &fpga_dev_pm_ops,
 	.probe		= fpga_probe,
-	.suspend_late	= fpga_suspend_late,
-	.resume_early	= fpga_resume_early,
 };
 
 static int __init fpga_init(void)
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 26b387c1242..3d03337ad42 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -1264,8 +1264,9 @@ static struct irq_chip mpuio_irq_chip = {
 
 #include <linux/platform_device.h>
 
-static int omap_mpuio_suspend_late(struct platform_device *pdev, pm_message_t mesg)
+static int omap_mpuio_suspend_noirq(struct device *dev)
 {
+	struct platform_device *pdev = to_platform_device(dev);
 	struct gpio_bank	*bank = platform_get_drvdata(pdev);
 	void __iomem		*mask_reg = bank->base + OMAP_MPUIO_GPIO_MASKIT;
 	unsigned long		flags;
@@ -1278,8 +1279,9 @@ static int omap_mpuio_suspend_late(struct platform_device *pdev, pm_message_t me
 	return 0;
 }
 
-static int omap_mpuio_resume_early(struct platform_device *pdev)
+static int omap_mpuio_resume_noirq(struct device *dev)
 {
+	struct platform_device *pdev = to_platform_device(dev);
 	struct gpio_bank	*bank = platform_get_drvdata(pdev);
 	void __iomem		*mask_reg = bank->base + OMAP_MPUIO_GPIO_MASKIT;
 	unsigned long		flags;
@@ -1291,14 +1293,18 @@ static int omap_mpuio_resume_early(struct platform_device *pdev)
 	return 0;
 }
 
+static struct dev_pm_ops omap_mpuio_dev_pm_ops = {
+	.suspend_noirq = omap_mpuio_suspend_noirq,
+	.resume_noirq = omap_mpuio_resume_noirq,
+};
+
 /* use platform_driver for this, now that there's no longer any
  * point to sys_device (other than not disturbing old code).
  */
 static struct platform_driver omap_mpuio_driver = {
-	.suspend_late	= omap_mpuio_suspend_late,
-	.resume_early	= omap_mpuio_resume_early,
 	.driver		= {
 		.name	= "mpuio",
+		.pm	= &omap_mpuio_dev_pm_ops,
 	},
 };
 
-- 
cgit v1.2.3


From 9fadfd1adff28a8895de8df9e8a778c44958840f Mon Sep 17 00:00:00 2001
From: Herbert Xu <herbert@gondor.apana.org.au>
Date: Wed, 22 Jul 2009 12:29:41 +0800
Subject: crypto: sha512-s390 - Add export/import support

This patch adds export/import support to sha512-s390 (which includes
sha384-s390).  The exported type is defined by struct sha512_state,
which is basically the entire descriptor state of sha512_generic.

Since sha512-s390 only supports a 64-bit byte count the import
function will reject anything that exceeds that.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
---
 arch/s390/crypto/sha512_s390.c | 36 ++++++++++++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)

(limited to 'arch')

diff --git a/arch/s390/crypto/sha512_s390.c b/arch/s390/crypto/sha512_s390.c
index 83192bfc804..b4b3438ae77 100644
--- a/arch/s390/crypto/sha512_s390.c
+++ b/arch/s390/crypto/sha512_s390.c
@@ -13,7 +13,10 @@
  *
  */
 #include <crypto/internal/hash.h>
+#include <crypto/sha.h>
+#include <linux/errno.h>
 #include <linux/init.h>
+#include <linux/kernel.h>
 #include <linux/module.h>
 
 #include "sha.h"
@@ -37,12 +40,42 @@ static int sha512_init(struct shash_desc *desc)
 	return 0;
 }
 
+static int sha512_export(struct shash_desc *desc, void *out)
+{
+	struct s390_sha_ctx *sctx = shash_desc_ctx(desc);
+	struct sha512_state *octx = out;
+
+	octx->count[0] = sctx->count;
+	octx->count[1] = 0;
+	memcpy(octx->state, sctx->state, sizeof(octx->state));
+	memcpy(octx->buf, sctx->buf, sizeof(octx->buf));
+	return 0;
+}
+
+static int sha512_import(struct shash_desc *desc, const u8 *in)
+{
+	struct s390_sha_ctx *sctx = shash_desc_ctx(desc);
+	struct sha512_state *ictx = in;
+
+	if (unlikely(ictx->count[1]))
+		return -ERANGE;
+	sctx->count = ictx->count[0];
+
+	memcpy(sctx->state, ictx->state, sizeof(ictx->state));
+	memcpy(sctx->buf, ictx->buf, sizeof(ictx->buf));
+	sctx->func = KIMD_SHA_512;
+	return 0;
+}
+
 static struct shash_alg sha512_alg = {
 	.digestsize	=	SHA512_DIGEST_SIZE,
 	.init		=	sha512_init,
 	.update		=	s390_sha_update,
 	.final		=	s390_sha_final,
+	.export		=	sha512_export,
+	.import		=	sha512_import,
 	.descsize	=	sizeof(struct s390_sha_ctx),
+	.statesize	=	sizeof(struct sha512_state),
 	.base		=	{
 		.cra_name	=	"sha512",
 		.cra_driver_name=	"sha512-s390",
@@ -78,7 +111,10 @@ static struct shash_alg sha384_alg = {
 	.init		=	sha384_init,
 	.update		=	s390_sha_update,
 	.final		=	s390_sha_final,
+	.export		=	sha512_export,
+	.import		=	sha512_import,
 	.descsize	=	sizeof(struct s390_sha_ctx),
+	.statesize	=	sizeof(struct sha512_state),
 	.base		=	{
 		.cra_name	=	"sha384",
 		.cra_driver_name=	"sha384-s390",
-- 
cgit v1.2.3


From 52ec7752b457311f10f5a8d16faa8ac2e684eb65 Mon Sep 17 00:00:00 2001
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Date: Wed, 22 Jul 2009 21:51:40 -0700
Subject: Input: pxa27x_keypad - remove extra clk_disable

clk_disable() in remove method is not needed since we already
have clk_disable in pxa27x_keypad_close().

Also make sure the driver uses resource_size() and helpers from
include/input/matrix_keypad.h

Tested-by: Mike Rapoport <mike@compulab.co.il>
Acked-by: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 arch/arm/mach-pxa/include/mach/pxa27x_keypad.h | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/include/mach/pxa27x_keypad.h b/arch/arm/mach-pxa/include/mach/pxa27x_keypad.h
index d5a48a96dea..63e8965ad85 100644
--- a/arch/arm/mach-pxa/include/mach/pxa27x_keypad.h
+++ b/arch/arm/mach-pxa/include/mach/pxa27x_keypad.h
@@ -2,6 +2,7 @@
 #define __ASM_ARCH_PXA27x_KEYPAD_H
 
 #include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
 
 #define MAX_MATRIX_KEY_ROWS	(8)
 #define MAX_MATRIX_KEY_COLS	(8)
@@ -51,8 +52,6 @@ struct pxa27x_keypad_platform_data {
 	unsigned int	debounce_interval;
 };
 
-#define KEY(row, col, val)	(((row) << 28) | ((col) << 24) | (val))
-
 extern void pxa_set_keypad_info(struct pxa27x_keypad_platform_data *info);
 
 #endif /* __ASM_ARCH_PXA27x_KEYPAD_H */
-- 
cgit v1.2.3


From 4832958218f96f98009c5e01729fbe2b48c7124c Mon Sep 17 00:00:00 2001
From: Michael Hennerich <michael.hennerich@analog.com>
Date: Wed, 22 Jul 2009 21:51:34 -0700
Subject: Input: add Blackfin rotary input driver

This driver handles the Blackfin on-chip rotary peripheral.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 arch/blackfin/include/asm/bfin_rotary.h | 39 +++++++++++++++++++++++++++++++++
 1 file changed, 39 insertions(+)
 create mode 100644 arch/blackfin/include/asm/bfin_rotary.h

(limited to 'arch')

diff --git a/arch/blackfin/include/asm/bfin_rotary.h b/arch/blackfin/include/asm/bfin_rotary.h
new file mode 100644
index 00000000000..425ece64fd5
--- /dev/null
+++ b/arch/blackfin/include/asm/bfin_rotary.h
@@ -0,0 +1,39 @@
+/*
+ * board initialization should put one of these structures into platform_data
+ * and place the bfin-rotary onto platform_bus named "bfin-rotary".
+ */
+
+#ifndef _BFIN_ROTARY_H
+#define _BFIN_ROTARY_H
+
+/* mode bitmasks */
+#define ROT_QUAD_ENC	CNTMODE_QUADENC	/* quadrature/grey code encoder mode */
+#define ROT_BIN_ENC	CNTMODE_BINENC	/* binary encoder mode */
+#define ROT_UD_CNT	CNTMODE_UDCNT	/* rotary counter mode */
+#define ROT_DIR_CNT	CNTMODE_DIRCNT	/* direction counter mode */
+
+#define ROT_DEBE	DEBE		/* Debounce Enable */
+
+#define ROT_CDGINV	CDGINV		/* CDG Pin Polarity Invert */
+#define ROT_CUDINV	CUDINV		/* CUD Pin Polarity Invert */
+#define ROT_CZMINV	CZMINV		/* CZM Pin Polarity Invert */
+
+struct bfin_rotary_platform_data {
+	/* set rotary UP KEY_### or BTN_### in case you prefer
+	 * bfin-rotary to send EV_KEY otherwise set 0
+	 */
+	unsigned int rotary_up_key;
+	/* set rotary DOWN KEY_### or BTN_### in case you prefer
+	 * bfin-rotary to send EV_KEY otherwise set 0
+	 */
+	unsigned int rotary_down_key;
+	/* set rotary BUTTON KEY_### or BTN_### */
+	unsigned int rotary_button_key;
+	/* set rotary Relative Axis REL_### in case you prefer
+	 * bfin-rotary to send EV_REL otherwise set 0
+	 */
+	unsigned int rotary_rel_code;
+	unsigned short debounce;	/* 0..17 */
+	unsigned short mode;
+};
+#endif
-- 
cgit v1.2.3


From 42ff4cf957b695250534e540375e23507c722327 Mon Sep 17 00:00:00 2001
From: wanzongshun <mcuos.com@gmail.com>
Date: Fri, 17 Jul 2009 14:42:33 +0100
Subject: [ARM] 5610/1: Add fmi resource define for w90p910 platform

Add fmi resource define for w90p910 platform.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-w90x900/mach-w90p910evb.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-w90x900/mach-w90p910evb.c b/arch/arm/mach-w90x900/mach-w90p910evb.c
index 7a62bd348e8..3b9fa312d9f 100644
--- a/arch/arm/mach-w90x900/mach-w90p910evb.c
+++ b/arch/arm/mach-w90x900/mach-w90p910evb.c
@@ -228,6 +228,28 @@ struct platform_device w90x900_device_usbgadget = {
 };
 EXPORT_SYMBOL(w90x900_device_usbgadget);
 
+/* FMI Device */
+
+static struct resource w90p910_fmi_resource[] = {
+	[0] = {
+		.start = W90X900_PA_FMI,
+		.end   = W90X900_PA_FMI + W90X900_SZ_FMI - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_FMI,
+		.end   = IRQ_FMI,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device w90p910_device_fmi = {
+	.name		= "w90p910-fmi",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(w90p910_fmi_resource),
+	.resource	= w90p910_fmi_resource,
+};
+
 static struct map_desc w90p910_iodesc[] __initdata = {
 };
 
@@ -242,6 +264,7 @@ static struct platform_device *w90p910evb_dev[] __initdata = {
 	&w90x900_device_rtc,
 	&w90x900_device_kpi,
 	&w90x900_device_usbgadget,
+	&w90p910_device_fmi,
 };
 
 static void __init w90p910evb_map_io(void)
-- 
cgit v1.2.3


From 768db4e04b4c969cf3a9e81a79a10af6468ca56d Mon Sep 17 00:00:00 2001
From: wanzongshun <mcuos.com@gmail.com>
Date: Thu, 23 Jul 2009 08:47:57 +0100
Subject: [ARM] 5616/1: Add mac resource define for w90p910 mac driver

Add mac resource define for w90p910 mac driver.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-w90x900/mach-w90p910evb.c | 33 +++++++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-w90x900/mach-w90p910evb.c b/arch/arm/mach-w90x900/mach-w90p910evb.c
index 3b9fa312d9f..2e56d84c632 100644
--- a/arch/arm/mach-w90x900/mach-w90p910evb.c
+++ b/arch/arm/mach-w90x900/mach-w90p910evb.c
@@ -250,6 +250,38 @@ static struct platform_device w90p910_device_fmi = {
 	.resource	= w90p910_fmi_resource,
 };
 
+/* MAC device */
+
+static struct resource w90x900_emc_resource[] = {
+	[0] = {
+		.start = W90X900_PA_EMC,
+		.end   = W90X900_PA_EMC + W90X900_SZ_EMC - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_EMCTX,
+		.end   = IRQ_EMCTX,
+		.flags = IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start = IRQ_EMCRX,
+		.end   = IRQ_EMCRX,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static u64 w90x900_device_emc_dmamask = 0xffffffffUL;
+static struct platform_device w90p910_device_emc = {
+	.name		= "w90p910-emc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(w90x900_emc_resource),
+	.resource	= w90x900_emc_resource,
+	.dev              = {
+		.dma_mask = &w90x900_device_emc_dmamask,
+		.coherent_dma_mask = 0xffffffffUL
+	}
+};
+
 static struct map_desc w90p910_iodesc[] __initdata = {
 };
 
@@ -265,6 +297,7 @@ static struct platform_device *w90p910evb_dev[] __initdata = {
 	&w90x900_device_kpi,
 	&w90x900_device_usbgadget,
 	&w90p910_device_fmi,
+	&w90p910_device_emc,
 };
 
 static void __init w90p910evb_map_io(void)
-- 
cgit v1.2.3


From b48147663b2582bfb91a2bf39f9d1ffe8f209122 Mon Sep 17 00:00:00 2001
From: wanzongshun <mcuos.com@gmail.com>
Date: Thu, 23 Jul 2009 08:50:20 +0100
Subject: [ARM] 5617/1: rename this spi device as w90p910-spi

When programming clock api, I named this spi device
as w90p910-usi, now, I think named it as w90p910-spi better

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-w90x900/w90p910.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-w90x900/w90p910.c b/arch/arm/mach-w90x900/w90p910.c
index 1bde69eac3d..6ebf5cfc78d 100644
--- a/arch/arm/mach-w90x900/w90p910.c
+++ b/arch/arm/mach-w90x900/w90p910.c
@@ -93,7 +93,7 @@ static struct clk_lookup w90p910_clkregs[] = {
 	DEF_CLKLOOK(&clk_wdt, "w90p910-wdt", NULL),
 	DEF_CLKLOOK(&clk_gdma, "w90p910-gdma", NULL),
 	DEF_CLKLOOK(&clk_adc, "w90p910-adc", NULL),
-	DEF_CLKLOOK(&clk_usi, "w90p910-usi", NULL),
+	DEF_CLKLOOK(&clk_usi, "w90p910-spi", NULL),
 };
 
 /* Initial serial platform data */
-- 
cgit v1.2.3


From c16d5d5657294e782d505efd00bbf2452d6aa0ca Mon Sep 17 00:00:00 2001
From: wanzongshun <mcuos.com@gmail.com>
Date: Thu, 23 Jul 2009 08:51:46 +0100
Subject: [ARM] 5618/1: Add spi resource define for w90p910 spi driver

Add spi resource define for w90p910 spi driver.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-w90x900/mach-w90p910evb.c | 61 +++++++++++++++++++++++++++++++++
 1 file changed, 61 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-w90x900/mach-w90p910evb.c b/arch/arm/mach-w90x900/mach-w90p910evb.c
index 2e56d84c632..3e3a267b2dd 100644
--- a/arch/arm/mach-w90x900/mach-w90p910evb.c
+++ b/arch/arm/mach-w90x900/mach-w90p910evb.c
@@ -20,7 +20,13 @@
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
+
 #include <linux/mtd/physmap.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -35,6 +41,8 @@
 
 #define W90P910_FLASH_BASE	0xA0000000
 #define W90P910_FLASH_SIZE	0x400000
+#define SPIOFFSET		0x200
+#define SPIOREG_SIZE		0x100
 
 static struct mtd_partition w90p910_flash_partitions[] = {
 	{
@@ -282,6 +290,56 @@ static struct platform_device w90p910_device_emc = {
 	}
 };
 
+/* SPI device */
+
+static struct resource w90p910_spi_resource[] = {
+	[0] = {
+		.start = W90X900_PA_I2C + SPIOFFSET,
+		.end   = W90X900_PA_I2C + SPIOFFSET + SPIOREG_SIZE - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_SSP,
+		.end   = IRQ_SSP,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device w90p910_device_spi = {
+	.name		= "w90p910-spi",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(w90p910_spi_resource),
+	.resource	= w90p910_spi_resource,
+};
+
+/* spi device, spi flash info */
+
+static struct mtd_partition w90p910_spi_flash_partitions[] = {
+	{
+		.name = "bootloader(spi)",
+		.size = 0x0100000,
+		.offset = 0,
+	},
+};
+
+static struct flash_platform_data w90p910_spi_flash_data = {
+	.name = "m25p80",
+	.parts =  w90p910_spi_flash_partitions,
+	.nr_parts = ARRAY_SIZE(w90p910_spi_flash_partitions),
+	.type = "w25x16",
+};
+
+static struct spi_board_info w90p910_spi_board_info[] __initdata = {
+	{
+		.modalias = "m25p80",
+		.max_speed_hz = 20000000,
+		.bus_num = 0,
+		.chip_select = 1,
+		.platform_data = &w90p910_spi_flash_data,
+		.mode = SPI_MODE_0,
+	},
+};
+
 static struct map_desc w90p910_iodesc[] __initdata = {
 };
 
@@ -298,6 +356,7 @@ static struct platform_device *w90p910evb_dev[] __initdata = {
 	&w90x900_device_usbgadget,
 	&w90p910_device_fmi,
 	&w90p910_device_emc,
+	&w90p910_device_spi,
 };
 
 static void __init w90p910evb_map_io(void)
@@ -309,6 +368,8 @@ static void __init w90p910evb_map_io(void)
 static void __init w90p910evb_init(void)
 {
 	platform_add_devices(w90p910evb_dev, ARRAY_SIZE(w90p910evb_dev));
+	spi_register_board_info(w90p910_spi_board_info,
+					ARRAY_SIZE(w90p910_spi_board_info));
 }
 
 MACHINE_START(W90P910EVB, "W90P910EVB")
-- 
cgit v1.2.3


From 3f3f1d9d8de10a5dad0d22046cdd26dfb93d05c9 Mon Sep 17 00:00:00 2001
From: wanzongshun <mcuos.com@gmail.com>
Date: Thu, 23 Jul 2009 08:52:51 +0100
Subject: [ARM] 5619/1: Add spi mfp api for w90p910 spi driver

Add spi mfp api for w90p910 spi driver.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-w90x900/mfp-w90p910.c | 38 +++++++++++++++++++++++++++++++++++++
 1 file changed, 38 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-w90x900/mfp-w90p910.c b/arch/arm/mach-w90x900/mfp-w90p910.c
index 8aec34b044c..e11a32b6856 100644
--- a/arch/arm/mach-w90x900/mfp-w90p910.c
+++ b/arch/arm/mach-w90x900/mfp-w90p910.c
@@ -34,6 +34,12 @@
 #define GPSELEI0	(0x01 << 26)
 #define GPSELEI1	(0x01 << 27)
 
+#define GPIOG0TO1	(0x03 << 14)
+#define GPIOG2TO3	(0x03 << 16)
+#define ENSPI		(0x0a << 14)
+#define ENI2C0		(0x01 << 14)
+#define ENI2C1		(0x01 << 16)
+
 static DECLARE_MUTEX(mfp_sem);
 
 void mfp_set_groupf(struct device *dev)
@@ -118,3 +124,35 @@ void mfp_set_groupi(struct device *dev)
 }
 EXPORT_SYMBOL(mfp_set_groupi);
 
+void mfp_set_groupg(struct device *dev)
+{
+	unsigned long mfpen;
+	const char *dev_id;
+
+	BUG_ON(!dev);
+
+	down(&mfp_sem);
+
+	dev_id = dev_name(dev);
+
+	mfpen = __raw_readl(REG_MFSEL);
+
+	if (strcmp(dev_id, "w90p910-spi") == 0) {
+		mfpen &= ~(GPIOG0TO1 | GPIOG2TO3);
+		mfpen |= ENSPI;/*enable spi*/
+	} else if (strcmp(dev_id, "w90p910-i2c0") == 0) {
+		mfpen &= ~(GPIOG0TO1);
+		mfpen |= ENI2C0;/*enable i2c0*/
+	} else if (strcmp(dev_id, "w90p910-i2c1") == 0) {
+		mfpen &= ~(GPIOG2TO3);
+		mfpen |= ENI2C1;/*enable i2c1*/
+	} else {
+		mfpen &= ~(GPIOG0TO1 | GPIOG2TO3);/*GPIOG[3:0]*/
+	}
+
+	__raw_writel(mfpen, REG_MFSEL);
+
+	up(&mfp_sem);
+}
+EXPORT_SYMBOL(mfp_set_groupg);
+
-- 
cgit v1.2.3


From 4fef5f90edc80aae92efec049750de93be9e25cb Mon Sep 17 00:00:00 2001
From: Santosh Shilimkar <santosh.shilimkar@ti.com>
Date: Wed, 1 Jul 2009 20:20:23 +0530
Subject: OMAP4: sDMA: Update the request lines and new registers.

This patch updates the platform dma.h with new dma request lines
for OMAP4 peripherals. Also additional hardware register of OMAP4
sDMA module are included.

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/plat-omap/include/mach/dma.h | 88 +++++++++++++++++++++++++++++++++++
 1 file changed, 88 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/plat-omap/include/mach/dma.h b/arch/arm/plat-omap/include/mach/dma.h
index 7b939cc0196..72f680b7180 100644
--- a/arch/arm/plat-omap/include/mach/dma.h
+++ b/arch/arm/plat-omap/include/mach/dma.h
@@ -122,6 +122,11 @@
 #define OMAP_DMA4_CCFN(n)		(0x60 * (n) + 0xc0)
 #define OMAP_DMA4_COLOR(n)		(0x60 * (n) + 0xc4)
 
+/* Additional registers available on OMAP4 */
+#define OMAP_DMA4_CDP(n)		(0x60 * (n) + 0xd0)
+#define OMAP_DMA4_CNDP(n)		(0x60 * (n) + 0xd4)
+#define OMAP_DMA4_CCDN(n)		(0x60 * (n) + 0xd8)
+
 /* Dummy defines to keep multi-omap compiles happy */
 #define OMAP1_DMA_REVISION		0
 #define OMAP1_DMA_IRQSTATUS_L0		0
@@ -311,6 +316,89 @@
 #define OMAP34XX_DMA_USIM_TX		79	/* S_DMA_78 */
 #define OMAP34XX_DMA_USIM_RX		80	/* S_DMA_79 */
 
+/* DMA request lines for 44xx */
+#define OMAP44XX_DMA_DSS_DISPC_REQ	6	/* S_DMA_5 */
+#define OMAP44XX_DMA_SYS_REQ2		7	/* S_DMA_6 */
+#define OMAP44XX_DMA_ISS_REQ1		9	/* S_DMA_8 */
+#define OMAP44XX_DMA_ISS_REQ2		10	/* S_DMA_9 */
+#define OMAP44XX_DMA_ISS_REQ3		12	/* S_DMA_11 */
+#define OMAP44XX_DMA_ISS_REQ4		13	/* S_DMA_12 */
+#define OMAP44XX_DMA_DSS_RFBI_REQ	14	/* S_DMA_13 */
+#define OMAP44XX_DMA_SPI3_TX0		15	/* S_DMA_14 */
+#define OMAP44XX_DMA_SPI3_RX0		16	/* S_DMA_15 */
+#define OMAP44XX_DMA_MCBSP2_TX		17	/* S_DMA_16 */
+#define OMAP44XX_DMA_MCBSP2_RX		18	/* S_DMA_17 */
+#define OMAP44XX_DMA_MCBSP3_TX		19	/* S_DMA_18 */
+#define OMAP44XX_DMA_MCBSP3_RX		20	/* S_DMA_19 */
+#define OMAP44XX_DMA_SPI3_TX1		23	/* S_DMA_22 */
+#define OMAP44XX_DMA_SPI3_RX1		24	/* S_DMA_23 */
+#define OMAP44XX_DMA_I2C3_TX		25	/* S_DMA_24 */
+#define OMAP44XX_DMA_I2C3_RX		26	/* S_DMA_25 */
+#define OMAP44XX_DMA_I2C1_TX		27	/* S_DMA_26 */
+#define OMAP44XX_DMA_I2C1_RX		28	/* S_DMA_27 */
+#define OMAP44XX_DMA_I2C2_TX		29	/* S_DMA_28 */
+#define OMAP44XX_DMA_I2C2_RX		30	/* S_DMA_29 */
+#define OMAP44XX_DMA_MCBSP4_TX		31	/* S_DMA_30 */
+#define OMAP44XX_DMA_MCBSP4_RX		32	/* S_DMA_31 */
+#define OMAP44XX_DMA_MCBSP1_TX		33	/* S_DMA_32 */
+#define OMAP44XX_DMA_MCBSP1_RX		34	/* S_DMA_33 */
+#define OMAP44XX_DMA_SPI1_TX0		35	/* S_DMA_34 */
+#define OMAP44XX_DMA_SPI1_RX0		36	/* S_DMA_35 */
+#define OMAP44XX_DMA_SPI1_TX1		37	/* S_DMA_36 */
+#define OMAP44XX_DMA_SPI1_RX1		38	/* S_DMA_37 */
+#define OMAP44XX_DMA_SPI1_TX2		39	/* S_DMA_38 */
+#define OMAP44XX_DMA_SPI1_RX2		40	/* S_DMA_39 */
+#define OMAP44XX_DMA_SPI1_TX3		41	/* S_DMA_40 */
+#define OMAP44XX_DMA_SPI1_RX3		42	/* S_DMA_41 */
+#define OMAP44XX_DMA_SPI2_TX0		43	/* S_DMA_42 */
+#define OMAP44XX_DMA_SPI2_RX0		44	/* S_DMA_43 */
+#define OMAP44XX_DMA_SPI2_TX1		45	/* S_DMA_44 */
+#define OMAP44XX_DMA_SPI2_RX1		46	/* S_DMA_45 */
+#define OMAP44XX_DMA_MMC2_TX		47	/* S_DMA_46 */
+#define OMAP44XX_DMA_MMC2_RX		48	/* S_DMA_47 */
+#define OMAP44XX_DMA_UART1_TX		49	/* S_DMA_48 */
+#define OMAP44XX_DMA_UART1_RX		50	/* S_DMA_49 */
+#define OMAP44XX_DMA_UART2_TX		51	/* S_DMA_50 */
+#define OMAP44XX_DMA_UART2_RX		52	/* S_DMA_51 */
+#define OMAP44XX_DMA_UART3_TX		53	/* S_DMA_52 */
+#define OMAP44XX_DMA_UART3_RX		54	/* S_DMA_53 */
+#define OMAP44XX_DMA_UART4_TX		55	/* S_DMA_54 */
+#define OMAP44XX_DMA_UART4_RX		56	/* S_DMA_55 */
+#define OMAP44XX_DMA_MMC4_TX		57	/* S_DMA_56 */
+#define OMAP44XX_DMA_MMC4_RX		58	/* S_DMA_57 */
+#define OMAP44XX_DMA_MMC5_TX		59	/* S_DMA_58 */
+#define OMAP44XX_DMA_MMC5_RX		60	/* S_DMA_59 */
+#define OMAP44XX_DMA_MMC1_TX		61	/* S_DMA_60 */
+#define OMAP44XX_DMA_MMC1_RX		62	/* S_DMA_61 */
+#define OMAP44XX_DMA_SYS_REQ3		64	/* S_DMA_63 */
+#define OMAP44XX_DMA_MCPDM_UP		65	/* S_DMA_64 */
+#define OMAP44XX_DMA_MCPDM_DL		66	/* S_DMA_65 */
+#define OMAP44XX_DMA_SPI4_TX0		70	/* S_DMA_69 */
+#define OMAP44XX_DMA_SPI4_RX0		71	/* S_DMA_70 */
+#define OMAP44XX_DMA_DSS_DSI1_REQ0	72	/* S_DMA_71 */
+#define OMAP44XX_DMA_DSS_DSI1_REQ1	73	/* S_DMA_72 */
+#define OMAP44XX_DMA_DSS_DSI1_REQ2	74	/* S_DMA_73 */
+#define OMAP44XX_DMA_DSS_DSI1_REQ3	75	/* S_DMA_74 */
+#define OMAP44XX_DMA_DSS_HDMI_REQ	76	/* S_DMA_75 */
+#define OMAP44XX_DMA_MMC3_TX		77	/* S_DMA_76 */
+#define OMAP44XX_DMA_MMC3_RX		78	/* S_DMA_77 */
+#define OMAP44XX_DMA_USIM_TX		79	/* S_DMA_78 */
+#define OMAP44XX_DMA_USIM_RX		80	/* S_DMA_79 */
+#define OMAP44XX_DMA_DSS_DSI2_REQ0	81	/* S_DMA_80 */
+#define OMAP44XX_DMA_DSS_DSI2_REQ1	82	/* S_DMA_81 */
+#define OMAP44XX_DMA_DSS_DSI2_REQ2	83	/* S_DMA_82 */
+#define OMAP44XX_DMA_DSS_DSI2_REQ3	84	/* S_DMA_83 */
+#define OMAP44XX_DMA_ABE_REQ0		101	/* S_DMA_100 */
+#define OMAP44XX_DMA_ABE_REQ1		102	/* S_DMA_101 */
+#define OMAP44XX_DMA_ABE_REQ2		103	/* S_DMA_102 */
+#define OMAP44XX_DMA_ABE_REQ3		104	/* S_DMA_103 */
+#define OMAP44XX_DMA_ABE_REQ4		105	/* S_DMA_104 */
+#define OMAP44XX_DMA_ABE_REQ5		106	/* S_DMA_105 */
+#define OMAP44XX_DMA_ABE_REQ6		107	/* S_DMA_106 */
+#define OMAP44XX_DMA_ABE_REQ7		108	/* S_DMA_107 */
+#define OMAP44XX_DMA_I2C4_TX		124	/* S_DMA_123 */
+#define OMAP44XX_DMA_I2C4_RX		125	/* S_DMA_124 */
+
 /*----------------------------------------------------------------------------*/
 
 /* Hardware registers for LCD DMA */
-- 
cgit v1.2.3


From 88987ef91b99cf99bc5d167caeb31d4958fbf931 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:32:52 +0100
Subject: Thumb-2: Add some .align statements to the .S files

Since the Thumb-2 instructions can be 16-bit wide, data in the .text
sections may not be aligned to a 32-bit word and this leads to unaligned
exceptions. This patch does not affect the ARM code generation.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/boot/compressed/head.S | 3 +++
 arch/arm/kernel/entry-armv.S    | 4 ++++
 arch/arm/kernel/head-common.S   | 2 ++
 arch/arm/lib/sha1.S             | 2 ++
 arch/arm/vfp/entry.S            | 2 ++
 5 files changed, 13 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 4515728c534..82f5fcfd956 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -291,6 +291,7 @@ wont_overwrite:	mov	r0, r4
 		bl	decompress_kernel
 		b	call_kernel
 
+		.align	2
 		.type	LC0, #object
 LC0:		.word	LC0			@ r1
 		.word	__bss_start		@ r2
@@ -589,6 +590,7 @@ call_cache_fn:	adr	r12, proc_types
  * methods.  Writeback caches _must_ have the flush method
  * defined.
  */
+		.align	2
 		.type	proc_types,#object
 proc_types:
 		.word	0x41560600		@ ARM6/610
@@ -945,6 +947,7 @@ __armv3_mpu_cache_flush:
  * memory, which again must be relocatable.
  */
 #ifdef DEBUG
+		.align	2
 		.type	phexbuf,#object
 phexbuf:	.space	12
 		.size	phexbuf, . - phexbuf
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index fc8af43c500..0befd1cabf4 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -1065,6 +1065,10 @@ vector_\name:
 	ldr	lr, [pc, lr, lsl #2]
 	movs	pc, lr			@ branch to handler in SVC mode
 ENDPROC(vector_\name)
+
+	.align	2
+	@ handler addresses follow this label
+1:
 	.endm
 
 	.globl	__stubs_start
diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S
index 991952c644d..dbfaef07a1f 100644
--- a/arch/arm/kernel/head-common.S
+++ b/arch/arm/kernel/head-common.S
@@ -14,6 +14,7 @@
 #define ATAG_CORE 0x54410001
 #define ATAG_CORE_SIZE ((2*4 + 3*4) >> 2)
 
+	.align	2
 	.type	__switch_data, %object
 __switch_data:
 	.long	__mmap_switched
@@ -185,6 +186,7 @@ ENDPROC(lookup_processor_type)
  * Look in <asm/procinfo.h> and arch/arm/kernel/arch.[ch] for
  * more information about the __proc_info and __arch_info structures.
  */
+	.align	2
 	.long	__proc_info_begin
 	.long	__proc_info_end
 3:	.long	.
diff --git a/arch/arm/lib/sha1.S b/arch/arm/lib/sha1.S
index a16fb208c84..09b548cac1a 100644
--- a/arch/arm/lib/sha1.S
+++ b/arch/arm/lib/sha1.S
@@ -187,6 +187,7 @@ ENTRY(sha_transform)
 
 ENDPROC(sha_transform)
 
+	.align	2
 .L_sha_K:
 	.word	0x5a827999, 0x6ed9eba1, 0x8f1bbcdc, 0xca62c1d6
 
@@ -195,6 +196,7 @@ ENDPROC(sha_transform)
  * void sha_init(__u32 *buf)
  */
 
+	.align	2
 .L_sha_initial_digest:
 	.word	0x67452301, 0xefcdab89, 0x98badcfe, 0x10325476, 0xc3d2e1f0
 
diff --git a/arch/arm/vfp/entry.S b/arch/arm/vfp/entry.S
index a2bed62aec2..4fa9903b83c 100644
--- a/arch/arm/vfp/entry.S
+++ b/arch/arm/vfp/entry.S
@@ -42,6 +42,7 @@ ENTRY(vfp_null_entry)
 	mov	pc, lr
 ENDPROC(vfp_null_entry)
 
+	.align	2
 .LCvfp:
 	.word	vfp_vector
 
@@ -61,6 +62,7 @@ ENTRY(vfp_testing_entry)
 	mov	pc, r9			@ we have handled the fault
 ENDPROC(vfp_testing_entry)
 
+	.align	2
 VFP_arch_address:
 	.word	VFP_arch
 
-- 
cgit v1.2.3


From 0becb088501886f37ade38762c8eaaf4263572cc Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:32:53 +0100
Subject: Thumb-2: Add macros for the unified assembler syntax

This patch adds various C and assembler macros that help with using
the unified assembler syntax for compiling files to either ARM or
Thumb-2 modes.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/Kconfig               |   3 +
 arch/arm/Makefile              |   2 +-
 arch/arm/include/asm/unified.h | 126 +++++++++++++++++++++++++++++++++++++++++
 3 files changed, 130 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/include/asm/unified.h

(limited to 'arch')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index aef63c8e3d2..da28e7ba608 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -983,6 +983,9 @@ config HZ
 	default AT91_TIMER_HZ if ARCH_AT91
 	default 100
 
+config ARM_ASM_UNIFIED
+	bool
+
 config AEABI
 	bool "Use the ARM EABI to compile the kernel"
 	help
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index c877d6df23d..3505572a21e 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -95,7 +95,7 @@ endif
 
 # Need -Uarm for gcc < 3.x
 KBUILD_CFLAGS	+=$(CFLAGS_ABI) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm
-KBUILD_AFLAGS	+=$(CFLAGS_ABI) $(arch-y) $(tune-y) -msoft-float
+KBUILD_AFLAGS	+=$(CFLAGS_ABI) $(arch-y) $(tune-y) -include asm/unified.h -msoft-float
 
 CHECKFLAGS	+= -D__arm__
 
diff --git a/arch/arm/include/asm/unified.h b/arch/arm/include/asm/unified.h
new file mode 100644
index 00000000000..073e85b9b96
--- /dev/null
+++ b/arch/arm/include/asm/unified.h
@@ -0,0 +1,126 @@
+/*
+ * include/asm-arm/unified.h - Unified Assembler Syntax helper macros
+ *
+ * Copyright (C) 2008 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_UNIFIED_H
+#define __ASM_UNIFIED_H
+
+#if defined(__ASSEMBLY__) && defined(CONFIG_ARM_ASM_UNIFIED)
+	.syntax unified
+#endif
+
+#ifdef CONFIG_THUMB2_KERNEL
+
+#if __GNUC__ < 4
+#error Thumb-2 kernel requires gcc >= 4
+#endif
+
+/* The CPSR bit describing the instruction set (Thumb) */
+#define PSR_ISETSTATE	PSR_T_BIT
+
+#define ARM(x...)
+#define THUMB(x...)	x
+#define W(instr)	instr.w
+#define BSYM(sym)	sym + 1
+
+#else	/* !CONFIG_THUMB2_KERNEL */
+
+/* The CPSR bit describing the instruction set (ARM) */
+#define PSR_ISETSTATE	0
+
+#define ARM(x...)	x
+#define THUMB(x...)
+#define W(instr)	instr
+#define BSYM(sym)	sym
+
+#endif	/* CONFIG_THUMB2_KERNEL */
+
+#ifndef CONFIG_ARM_ASM_UNIFIED
+
+/*
+ * If the unified assembly syntax isn't used (in ARM mode), these
+ * macros expand to an empty string
+ */
+#ifdef __ASSEMBLY__
+	.macro	it, cond
+	.endm
+	.macro	itt, cond
+	.endm
+	.macro	ite, cond
+	.endm
+	.macro	ittt, cond
+	.endm
+	.macro	itte, cond
+	.endm
+	.macro	itet, cond
+	.endm
+	.macro	itee, cond
+	.endm
+	.macro	itttt, cond
+	.endm
+	.macro	ittte, cond
+	.endm
+	.macro	ittet, cond
+	.endm
+	.macro	ittee, cond
+	.endm
+	.macro	itett, cond
+	.endm
+	.macro	itete, cond
+	.endm
+	.macro	iteet, cond
+	.endm
+	.macro	iteee, cond
+	.endm
+#else	/* !__ASSEMBLY__ */
+__asm__(
+"	.macro	it, cond\n"
+"	.endm\n"
+"	.macro	itt, cond\n"
+"	.endm\n"
+"	.macro	ite, cond\n"
+"	.endm\n"
+"	.macro	ittt, cond\n"
+"	.endm\n"
+"	.macro	itte, cond\n"
+"	.endm\n"
+"	.macro	itet, cond\n"
+"	.endm\n"
+"	.macro	itee, cond\n"
+"	.endm\n"
+"	.macro	itttt, cond\n"
+"	.endm\n"
+"	.macro	ittte, cond\n"
+"	.endm\n"
+"	.macro	ittet, cond\n"
+"	.endm\n"
+"	.macro	ittee, cond\n"
+"	.endm\n"
+"	.macro	itett, cond\n"
+"	.endm\n"
+"	.macro	itete, cond\n"
+"	.endm\n"
+"	.macro	iteet, cond\n"
+"	.endm\n"
+"	.macro	iteee, cond\n"
+"	.endm\n");
+#endif	/* __ASSEMBLY__ */
+
+#endif	/* CONFIG_ARM_ASM_UNIFIED */
+
+#endif	/* !__ASM_UNIFIED_H */
-- 
cgit v1.2.3


From b86040a59feb255a8193173caa4d5199464433d5 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:32:54 +0100
Subject: Thumb-2: Implementation of the unified start-up and exceptions code

This patch implements the ARM/Thumb-2 unified kernel start-up and
exception handling code.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/include/asm/assembler.h |  11 +++
 arch/arm/include/asm/futex.h     |   1 +
 arch/arm/kernel/entry-armv.S     | 165 +++++++++++++++++++++++----------------
 arch/arm/kernel/entry-common.S   |  28 ++-----
 arch/arm/kernel/entry-header.S   |  92 ++++++++++++++++++++--
 arch/arm/kernel/head-common.S    |  13 +--
 arch/arm/kernel/head-nommu.S     |  11 ++-
 arch/arm/kernel/head.S           |  28 ++++---
 arch/arm/kernel/process.c        |   2 +-
 arch/arm/kernel/setup.c          |  28 +++++--
 arch/arm/kernel/unwind.c         |   4 +
 11 files changed, 263 insertions(+), 120 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h
index 15f8a092b70..1acd1da36d0 100644
--- a/arch/arm/include/asm/assembler.h
+++ b/arch/arm/include/asm/assembler.h
@@ -127,3 +127,14 @@
 #endif
 #endif
 	.endm
+
+#ifdef CONFIG_THUMB2_KERNEL
+	.macro	setmode, mode, reg
+	mov	\reg, #\mode
+	msr	cpsr_c, \reg
+	.endm
+#else
+	.macro	setmode, mode, reg
+	msr	cpsr_c, #\mode
+	.endm
+#endif
diff --git a/arch/arm/include/asm/futex.h b/arch/arm/include/asm/futex.h
index 9ee743b95de..bfcc15929a7 100644
--- a/arch/arm/include/asm/futex.h
+++ b/arch/arm/include/asm/futex.h
@@ -99,6 +99,7 @@ futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval)
 	__asm__ __volatile__("@futex_atomic_cmpxchg_inatomic\n"
 	"1:	ldrt	%0, [%3]\n"
 	"	teq	%0, %1\n"
+	"	it	eq	@ explicit IT needed for the 2b label\n"
 	"2:	streqt	%2, [%3]\n"
 	"3:\n"
 	"	.section __ex_table,\"a\"\n"
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 0befd1cabf4..468425f937d 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -34,7 +34,7 @@
 	@
 	@ routine called with r0 = irq number, r1 = struct pt_regs *
 	@
-	adrne	lr, 1b
+	adrne	lr, BSYM(1b)
 	bne	asm_do_IRQ
 
 #ifdef CONFIG_SMP
@@ -46,13 +46,13 @@
 	 */
 	test_for_ipi r0, r6, r5, lr
 	movne	r0, sp
-	adrne	lr, 1b
+	adrne	lr, BSYM(1b)
 	bne	do_IPI
 
 #ifdef CONFIG_LOCAL_TIMERS
 	test_for_ltirq r0, r6, r5, lr
 	movne	r0, sp
-	adrne	lr, 1b
+	adrne	lr, BSYM(1b)
 	bne	do_local_timer
 #endif
 #endif
@@ -70,7 +70,10 @@
  */
 	.macro	inv_entry, reason
 	sub	sp, sp, #S_FRAME_SIZE
-	stmib	sp, {r1 - lr}
+ ARM(	stmib	sp, {r1 - lr}		)
+ THUMB(	stmia	sp, {r0 - r12}		)
+ THUMB(	str	sp, [sp, #S_SP]		)
+ THUMB(	str	lr, [sp, #S_LR]		)
 	mov	r1, #\reason
 	.endm
 
@@ -126,17 +129,24 @@ ENDPROC(__und_invalid)
 	.macro	svc_entry, stack_hole=0
  UNWIND(.fnstart		)
  UNWIND(.save {r0 - pc}		)
-	sub	sp, sp, #(S_FRAME_SIZE + \stack_hole)
+	sub	sp, sp, #(S_FRAME_SIZE + \stack_hole - 4)
+#ifdef CONFIG_THUMB2_KERNEL
+ SPFIX(	str	r0, [sp]	)	@ temporarily saved
+ SPFIX(	mov	r0, sp		)
+ SPFIX(	tst	r0, #4		)	@ test original stack alignment
+ SPFIX(	ldr	r0, [sp]	)	@ restored
+#else
  SPFIX(	tst	sp, #4		)
- SPFIX(	bicne	sp, sp, #4	)
-	stmib	sp, {r1 - r12}
+#endif
+ SPFIX(	subeq	sp, sp, #4	)
+	stmia	sp, {r1 - r12}
 
 	ldmia	r0, {r1 - r3}
-	add	r5, sp, #S_SP		@ here for interlock avoidance
+	add	r5, sp, #S_SP - 4	@ here for interlock avoidance
 	mov	r4, #-1			@  ""  ""      ""       ""
-	add	r0, sp, #(S_FRAME_SIZE + \stack_hole)
- SPFIX(	addne	r0, r0, #4	)
-	str	r1, [sp]		@ save the "real" r0 copied
+	add	r0, sp, #(S_FRAME_SIZE + \stack_hole - 4)
+ SPFIX(	addeq	r0, r0, #4	)
+	str	r1, [sp, #-4]!		@ save the "real" r0 copied
 					@ from the exception stack
 
 	mov	r1, lr
@@ -196,9 +206,8 @@ __dabt_svc:
 	@
 	@ restore SPSR and restart the instruction
 	@
-	ldr	r0, [sp, #S_PSR]
-	msr	spsr_cxsf, r0
-	ldmia	sp, {r0 - pc}^			@ load r0 - pc, cpsr
+	ldr	r2, [sp, #S_PSR]
+	svc_exit r2				@ return from exception
  UNWIND(.fnend		)
 ENDPROC(__dabt_svc)
 
@@ -225,13 +234,12 @@ __irq_svc:
 	tst	r0, #_TIF_NEED_RESCHED
 	blne	svc_preempt
 #endif
-	ldr	r0, [sp, #S_PSR]		@ irqs are already disabled
-	msr	spsr_cxsf, r0
+	ldr	r4, [sp, #S_PSR]		@ irqs are already disabled
 #ifdef CONFIG_TRACE_IRQFLAGS
-	tst	r0, #PSR_I_BIT
+	tst	r4, #PSR_I_BIT
 	bleq	trace_hardirqs_on
 #endif
-	ldmia	sp, {r0 - pc}^			@ load r0 - pc, cpsr
+	svc_exit r4				@ return from exception
  UNWIND(.fnend		)
 ENDPROC(__irq_svc)
 
@@ -266,7 +274,7 @@ __und_svc:
 	@  r0 - instruction
 	@
 	ldr	r0, [r2, #-4]
-	adr	r9, 1f
+	adr	r9, BSYM(1f)
 	bl	call_fpe
 
 	mov	r0, sp				@ struct pt_regs *regs
@@ -280,9 +288,8 @@ __und_svc:
 	@
 	@ restore SPSR and restart the instruction
 	@
-	ldr	lr, [sp, #S_PSR]		@ Get SVC cpsr
-	msr	spsr_cxsf, lr
-	ldmia	sp, {r0 - pc}^			@ Restore SVC registers
+	ldr	r2, [sp, #S_PSR]		@ Get SVC cpsr
+	svc_exit r2				@ return from exception
  UNWIND(.fnend		)
 ENDPROC(__und_svc)
 
@@ -323,9 +330,8 @@ __pabt_svc:
 	@
 	@ restore SPSR and restart the instruction
 	@
-	ldr	r0, [sp, #S_PSR]
-	msr	spsr_cxsf, r0
-	ldmia	sp, {r0 - pc}^			@ load r0 - pc, cpsr
+	ldr	r2, [sp, #S_PSR]
+	svc_exit r2				@ return from exception
  UNWIND(.fnend		)
 ENDPROC(__pabt_svc)
 
@@ -353,7 +359,8 @@ ENDPROC(__pabt_svc)
  UNWIND(.fnstart	)
  UNWIND(.cantunwind	)	@ don't unwind the user space
 	sub	sp, sp, #S_FRAME_SIZE
-	stmib	sp, {r1 - r12}
+ ARM(	stmib	sp, {r1 - r12}	)
+ THUMB(	stmia	sp, {r0 - r12}	)
 
 	ldmia	r0, {r1 - r3}
 	add	r0, sp, #S_PC		@ here for interlock avoidance
@@ -372,7 +379,8 @@ ENDPROC(__pabt_svc)
 	@ Also, separately save sp_usr and lr_usr
 	@
 	stmia	r0, {r2 - r4}
-	stmdb	r0, {sp, lr}^
+ ARM(	stmdb	r0, {sp, lr}^			)
+ THUMB(	store_user_sp_lr r0, r1, S_SP - S_PC	)
 
 	@
 	@ Enable the alignment trap while in kernel mode
@@ -427,7 +435,7 @@ __dabt_usr:
 	@
 	enable_irq
 	mov	r2, sp
-	adr	lr, ret_from_exception
+	adr	lr, BSYM(ret_from_exception)
 	b	do_DataAbort
  UNWIND(.fnend		)
 ENDPROC(__dabt_usr)
@@ -452,7 +460,9 @@ __irq_usr:
 	ldr	r0, [tsk, #TI_PREEMPT]
 	str	r8, [tsk, #TI_PREEMPT]
 	teq	r0, r7
-	strne	r0, [r0, -r0]
+ ARM(	strne	r0, [r0, -r0]	)
+ THUMB(	movne	r0, #0		)
+ THUMB(	strne	r0, [r0]	)
 #endif
 #ifdef CONFIG_TRACE_IRQFLAGS
 	bl	trace_hardirqs_on
@@ -476,9 +486,10 @@ __und_usr:
 	@
 	@  r0 - instruction
 	@
-	adr	r9, ret_from_exception
-	adr	lr, __und_usr_unknown
+	adr	r9, BSYM(ret_from_exception)
+	adr	lr, BSYM(__und_usr_unknown)
 	tst	r3, #PSR_T_BIT			@ Thumb mode?
+	itet	eq				@ explicit IT needed for the 1f label
 	subeq	r4, r2, #4			@ ARM instr at LR - 4
 	subne	r4, r2, #2			@ Thumb instr at LR - 2
 1:	ldreqt	r0, [r4]
@@ -488,7 +499,10 @@ __und_usr:
 	beq	call_fpe
 	@ Thumb instruction
 #if __LINUX_ARM_ARCH__ >= 7
-2:	ldrht	r5, [r4], #2
+2:
+ ARM(	ldrht	r5, [r4], #2	)
+ THUMB(	ldrht	r5, [r4]	)
+ THUMB(	add	r4, r4, #2	)
 	and	r0, r5, #0xf800			@ mask bits 111x x... .... ....
 	cmp	r0, #0xe800			@ 32bit instruction if xx != 0
 	blo	__und_usr_unknown
@@ -577,9 +591,11 @@ call_fpe:
 	moveq	pc, lr
 	get_thread_info r10			@ get current thread
 	and	r8, r0, #0x00000f00		@ mask out CP number
+ THUMB(	lsr	r8, r8, #8		)
 	mov	r7, #1
 	add	r6, r10, #TI_USED_CP
-	strb	r7, [r6, r8, lsr #8]		@ set appropriate used_cp[]
+ ARM(	strb	r7, [r6, r8, lsr #8]	)	@ set appropriate used_cp[]
+ THUMB(	strb	r7, [r6, r8]		)	@ set appropriate used_cp[]
 #ifdef CONFIG_IWMMXT
 	@ Test if we need to give access to iWMMXt coprocessors
 	ldr	r5, [r10, #TI_FLAGS]
@@ -587,36 +603,38 @@ call_fpe:
 	movcss	r7, r5, lsr #(TIF_USING_IWMMXT + 1)
 	bcs	iwmmxt_task_enable
 #endif
-	add	pc, pc, r8, lsr #6
-	mov	r0, r0
-
-	mov	pc, lr				@ CP#0
-	b	do_fpe				@ CP#1 (FPE)
-	b	do_fpe				@ CP#2 (FPE)
-	mov	pc, lr				@ CP#3
+ ARM(	add	pc, pc, r8, lsr #6	)
+ THUMB(	lsl	r8, r8, #2		)
+ THUMB(	add	pc, r8			)
+	nop
+
+	W(mov)	pc, lr				@ CP#0
+	W(b)	do_fpe				@ CP#1 (FPE)
+	W(b)	do_fpe				@ CP#2 (FPE)
+	W(mov)	pc, lr				@ CP#3
 #ifdef CONFIG_CRUNCH
 	b	crunch_task_enable		@ CP#4 (MaverickCrunch)
 	b	crunch_task_enable		@ CP#5 (MaverickCrunch)
 	b	crunch_task_enable		@ CP#6 (MaverickCrunch)
 #else
-	mov	pc, lr				@ CP#4
-	mov	pc, lr				@ CP#5
-	mov	pc, lr				@ CP#6
+	W(mov)	pc, lr				@ CP#4
+	W(mov)	pc, lr				@ CP#5
+	W(mov)	pc, lr				@ CP#6
 #endif
-	mov	pc, lr				@ CP#7
-	mov	pc, lr				@ CP#8
-	mov	pc, lr				@ CP#9
+	W(mov)	pc, lr				@ CP#7
+	W(mov)	pc, lr				@ CP#8
+	W(mov)	pc, lr				@ CP#9
 #ifdef CONFIG_VFP
-	b	do_vfp				@ CP#10 (VFP)
-	b	do_vfp				@ CP#11 (VFP)
+	W(b)	do_vfp				@ CP#10 (VFP)
+	W(b)	do_vfp				@ CP#11 (VFP)
 #else
-	mov	pc, lr				@ CP#10 (VFP)
-	mov	pc, lr				@ CP#11 (VFP)
+	W(mov)	pc, lr				@ CP#10 (VFP)
+	W(mov)	pc, lr				@ CP#11 (VFP)
 #endif
-	mov	pc, lr				@ CP#12
-	mov	pc, lr				@ CP#13
-	mov	pc, lr				@ CP#14 (Debug)
-	mov	pc, lr				@ CP#15 (Control)
+	W(mov)	pc, lr				@ CP#12
+	W(mov)	pc, lr				@ CP#13
+	W(mov)	pc, lr				@ CP#14 (Debug)
+	W(mov)	pc, lr				@ CP#15 (Control)
 
 #ifdef CONFIG_NEON
 	.align	6
@@ -667,7 +685,7 @@ no_fp:	mov	pc, lr
 __und_usr_unknown:
 	enable_irq
 	mov	r0, sp
-	adr	lr, ret_from_exception
+	adr	lr, BSYM(ret_from_exception)
 	b	do_undefinstr
 ENDPROC(__und_usr_unknown)
 
@@ -711,7 +729,10 @@ ENTRY(__switch_to)
  UNWIND(.cantunwind	)
 	add	ip, r1, #TI_CPU_SAVE
 	ldr	r3, [r2, #TI_TP_VALUE]
-	stmia	ip!, {r4 - sl, fp, sp, lr}	@ Store most regs on stack
+ ARM(	stmia	ip!, {r4 - sl, fp, sp, lr} )	@ Store most regs on stack
+ THUMB(	stmia	ip!, {r4 - sl, fp}	   )	@ Store most regs on stack
+ THUMB(	str	sp, [ip], #4		   )
+ THUMB(	str	lr, [ip], #4		   )
 #ifdef CONFIG_MMU
 	ldr	r6, [r2, #TI_CPU_DOMAIN]
 #endif
@@ -736,8 +757,12 @@ ENTRY(__switch_to)
 	ldr	r0, =thread_notify_head
 	mov	r1, #THREAD_NOTIFY_SWITCH
 	bl	atomic_notifier_call_chain
+ THUMB(	mov	ip, r4			   )
 	mov	r0, r5
-	ldmia	r4, {r4 - sl, fp, sp, pc}	@ Load all regs saved previously
+ ARM(	ldmia	r4, {r4 - sl, fp, sp, pc}  )	@ Load all regs saved previously
+ THUMB(	ldmia	ip!, {r4 - sl, fp}	   )	@ Load all regs saved previously
+ THUMB(	ldr	sp, [ip], #4		   )
+ THUMB(	ldr	pc, [ip]		   )
  UNWIND(.fnend		)
 ENDPROC(__switch_to)
 
@@ -772,6 +797,7 @@ ENDPROC(__switch_to)
  * if your compiled code is not going to use the new instructions for other
  * purpose.
  */
+ THUMB(	.arm	)
 
 	.macro	usr_ret, reg
 #ifdef CONFIG_ARM_THUMB
@@ -1020,6 +1046,7 @@ __kuser_helper_version:				@ 0xffff0ffc
 	.globl	__kuser_helper_end
 __kuser_helper_end:
 
+ THUMB(	.thumb	)
 
 /*
  * Vector stubs.
@@ -1054,15 +1081,17 @@ vector_\name:
 	@ Prepare for SVC32 mode.  IRQs remain disabled.
 	@
 	mrs	r0, cpsr
-	eor	r0, r0, #(\mode ^ SVC_MODE)
+	eor	r0, r0, #(\mode ^ SVC_MODE | PSR_ISETSTATE)
 	msr	spsr_cxsf, r0
 
 	@
 	@ the branch table must immediately follow this code
 	@
 	and	lr, lr, #0x0f
+ THUMB(	adr	r0, 1f			)
+ THUMB(	ldr	lr, [r0, lr, lsl #2]	)
 	mov	r0, sp
-	ldr	lr, [pc, lr, lsl #2]
+ ARM(	ldr	lr, [pc, lr, lsl #2]	)
 	movs	pc, lr			@ branch to handler in SVC mode
 ENDPROC(vector_\name)
 
@@ -1206,14 +1235,16 @@ __stubs_end:
 
 	.globl	__vectors_start
 __vectors_start:
-	swi	SYS_ERROR0
-	b	vector_und + stubs_offset
-	ldr	pc, .LCvswi + stubs_offset
-	b	vector_pabt + stubs_offset
-	b	vector_dabt + stubs_offset
-	b	vector_addrexcptn + stubs_offset
-	b	vector_irq + stubs_offset
-	b	vector_fiq + stubs_offset
+ ARM(	swi	SYS_ERROR0	)
+ THUMB(	svc	#0		)
+ THUMB(	nop			)
+	W(b)	vector_und + stubs_offset
+	W(ldr)	pc, .LCvswi + stubs_offset
+	W(b)	vector_pabt + stubs_offset
+	W(b)	vector_dabt + stubs_offset
+	W(b)	vector_addrexcptn + stubs_offset
+	W(b)	vector_irq + stubs_offset
+	W(b)	vector_fiq + stubs_offset
 
 	.globl	__vectors_end
 __vectors_end:
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 366e5097a41..a0540c9f1f0 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -33,14 +33,7 @@ ret_fast_syscall:
 	/* perform architecture specific actions before user return */
 	arch_ret_to_user r1, lr
 
-	@ fast_restore_user_regs
-	ldr	r1, [sp, #S_OFF + S_PSR]	@ get calling cpsr
-	ldr	lr, [sp, #S_OFF + S_PC]!	@ get pc
-	msr	spsr_cxsf, r1			@ save in spsr_svc
-	ldmdb	sp, {r1 - lr}^			@ get calling r1 - lr
-	mov	r0, r0
-	add	sp, sp, #S_FRAME_SIZE - S_PC
-	movs	pc, lr				@ return & move spsr_svc into cpsr
+	restore_user_regs fast = 1, offset = S_OFF
  UNWIND(.fnend		)
 
 /*
@@ -73,14 +66,7 @@ no_work_pending:
 	/* perform architecture specific actions before user return */
 	arch_ret_to_user r1, lr
 
-	@ slow_restore_user_regs
-	ldr	r1, [sp, #S_PSR]		@ get calling cpsr
-	ldr	lr, [sp, #S_PC]!		@ get pc
-	msr	spsr_cxsf, r1			@ save in spsr_svc
-	ldmdb	sp, {r0 - lr}^			@ get calling r0 - lr
-	mov	r0, r0
-	add	sp, sp, #S_FRAME_SIZE - S_PC
-	movs	pc, lr				@ return & move spsr_svc into cpsr
+	restore_user_regs fast = 0, offset = 0
 ENDPROC(ret_to_user)
 
 /*
@@ -182,8 +168,10 @@ ftrace_stub:
 ENTRY(vector_swi)
 	sub	sp, sp, #S_FRAME_SIZE
 	stmia	sp, {r0 - r12}			@ Calling r0 - r12
-	add	r8, sp, #S_PC
-	stmdb	r8, {sp, lr}^			@ Calling sp, lr
+ ARM(	add	r8, sp, #S_PC		)
+ ARM(	stmdb	r8, {sp, lr}^		)	@ Calling sp, lr
+ THUMB(	mov	r8, sp			)
+ THUMB(	store_user_sp_lr r8, r10, S_SP	)	@ calling sp, lr
 	mrs	r8, spsr			@ called from non-FIQ mode, so ok.
 	str	lr, [sp, #S_PC]			@ Save calling PC
 	str	r8, [sp, #S_PSR]		@ Save CPSR
@@ -272,7 +260,7 @@ ENTRY(vector_swi)
 	bne	__sys_trace
 
 	cmp	scno, #NR_syscalls		@ check upper syscall limit
-	adr	lr, ret_fast_syscall		@ return address
+	adr	lr, BSYM(ret_fast_syscall)	@ return address
 	ldrcc	pc, [tbl, scno, lsl #2]		@ call sys_* routine
 
 	add	r1, sp, #S_OFF
@@ -293,7 +281,7 @@ __sys_trace:
 	mov	r0, #0				@ trace entry [IP = 0]
 	bl	syscall_trace
 
-	adr	lr, __sys_trace_return		@ return address
+	adr	lr, BSYM(__sys_trace_return)	@ return address
 	mov	scno, r0			@ syscall number (possibly new)
 	add	r1, sp, #S_R0 + S_OFF		@ pointer to regs
 	cmp	scno, #NR_syscalls		@ check upper syscall limit
diff --git a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S
index 87ab4e15799..a4eaf4f920c 100644
--- a/arch/arm/kernel/entry-header.S
+++ b/arch/arm/kernel/entry-header.S
@@ -36,11 +36,6 @@
 #endif
 	.endm
 
-	.macro	get_thread_info, rd
-	mov	\rd, sp, lsr #13
-	mov	\rd, \rd, lsl #13
-	.endm
-
 	.macro	alignment_trap, rtemp
 #ifdef CONFIG_ALIGNMENT_TRAP
 	ldr	\rtemp, .LCcralign
@@ -49,6 +44,93 @@
 #endif
 	.endm
 
+	@
+	@ Store/load the USER SP and LR registers by switching to the SYS
+	@ mode. Useful in Thumb-2 mode where "stm/ldm rd, {sp, lr}^" is not
+	@ available. Should only be called from SVC mode
+	@
+	.macro	store_user_sp_lr, rd, rtemp, offset = 0
+	mrs	\rtemp, cpsr
+	eor	\rtemp, \rtemp, #(SVC_MODE ^ SYSTEM_MODE)
+	msr	cpsr_c, \rtemp			@ switch to the SYS mode
+
+	str	sp, [\rd, #\offset]		@ save sp_usr
+	str	lr, [\rd, #\offset + 4]		@ save lr_usr
+
+	eor	\rtemp, \rtemp, #(SVC_MODE ^ SYSTEM_MODE)
+	msr	cpsr_c, \rtemp			@ switch back to the SVC mode
+	.endm
+
+	.macro	load_user_sp_lr, rd, rtemp, offset = 0
+	mrs	\rtemp, cpsr
+	eor	\rtemp, \rtemp, #(SVC_MODE ^ SYSTEM_MODE)
+	msr	cpsr_c, \rtemp			@ switch to the SYS mode
+
+	ldr	sp, [\rd, #\offset]		@ load sp_usr
+	ldr	lr, [\rd, #\offset + 4]		@ load lr_usr
+
+	eor	\rtemp, \rtemp, #(SVC_MODE ^ SYSTEM_MODE)
+	msr	cpsr_c, \rtemp			@ switch back to the SVC mode
+	.endm
+
+#ifndef CONFIG_THUMB2_KERNEL
+	.macro	svc_exit, rpsr
+	msr	spsr_cxsf, \rpsr
+	ldmia	sp, {r0 - pc}^			@ load r0 - pc, cpsr
+	.endm
+
+	.macro	restore_user_regs, fast = 0, offset = 0
+	ldr	r1, [sp, #\offset + S_PSR]	@ get calling cpsr
+	ldr	lr, [sp, #\offset + S_PC]!	@ get pc
+	msr	spsr_cxsf, r1			@ save in spsr_svc
+	.if	\fast
+	ldmdb	sp, {r1 - lr}^			@ get calling r1 - lr
+	.else
+	ldmdb	sp, {r0 - lr}^			@ get calling r0 - lr
+	.endif
+	add	sp, sp, #S_FRAME_SIZE - S_PC
+	movs	pc, lr				@ return & move spsr_svc into cpsr
+	.endm
+
+	.macro	get_thread_info, rd
+	mov	\rd, sp, lsr #13
+	mov	\rd, \rd, lsl #13
+	.endm
+#else	/* CONFIG_THUMB2_KERNEL */
+	.macro	svc_exit, rpsr
+	ldr	r0, [sp, #S_SP]			@ top of the stack
+	ldr	r1, [sp, #S_PC]			@ return address
+	tst	r0, #4				@ orig stack 8-byte aligned?
+	stmdb	r0, {r1, \rpsr}			@ rfe context
+	ldmia	sp, {r0 - r12}
+	ldr	lr, [sp, #S_LR]
+	addeq	sp, sp, #S_FRAME_SIZE - 8	@ aligned
+	addne	sp, sp, #S_FRAME_SIZE - 4	@ not aligned
+	rfeia	sp!
+	.endm
+
+	.macro	restore_user_regs, fast = 0, offset = 0
+	mov	r2, sp
+	load_user_sp_lr r2, r3, \offset + S_SP	@ calling sp, lr
+	ldr	r1, [sp, #\offset + S_PSR]	@ get calling cpsr
+	ldr	lr, [sp, #\offset + S_PC]	@ get pc
+	add	sp, sp, #\offset + S_SP
+	msr	spsr_cxsf, r1			@ save in spsr_svc
+	.if	\fast
+	ldmdb	sp, {r1 - r12}			@ get calling r1 - r12
+	.else
+	ldmdb	sp, {r0 - r12}			@ get calling r0 - r12
+	.endif
+	add	sp, sp, #S_FRAME_SIZE - S_SP
+	movs	pc, lr				@ return & move spsr_svc into cpsr
+	.endm
+
+	.macro	get_thread_info, rd
+	mov	\rd, sp
+	lsr	\rd, \rd, #13
+	mov	\rd, \rd, lsl #13
+	.endm
+#endif	/* !CONFIG_THUMB2_KERNEL */
 
 /*
  * These are the registers used in the syscall handler, and allow us to
diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S
index dbfaef07a1f..93ad576b2d7 100644
--- a/arch/arm/kernel/head-common.S
+++ b/arch/arm/kernel/head-common.S
@@ -52,7 +52,9 @@ __mmap_switched:
 	strcc	fp, [r6],#4
 	bcc	1b
 
-	ldmia	r3, {r4, r5, r6, r7, sp}
+ ARM(	ldmia	r3, {r4, r5, r6, r7, sp})
+ THUMB(	ldmia	r3, {r4, r5, r6, r7}	)
+ THUMB(	ldr	sp, [r3, #16]		)
 	str	r9, [r4]			@ Save processor ID
 	str	r1, [r5]			@ Save machine type
 	str	r2, [r6]			@ Save atags pointer
@@ -156,7 +158,8 @@ ENDPROC(__error)
  */
 __lookup_processor_type:
 	adr	r3, 3f
-	ldmda	r3, {r5 - r7}
+	ldmia	r3, {r5 - r7}
+	add	r3, r3, #8
 	sub	r3, r3, r7			@ get offset between virt&phys
 	add	r5, r5, r3			@ convert virt addresses to
 	add	r6, r6, r3			@ physical address space
@@ -187,9 +190,9 @@ ENDPROC(lookup_processor_type)
  * more information about the __proc_info and __arch_info structures.
  */
 	.align	2
-	.long	__proc_info_begin
+3:	.long	__proc_info_begin
 	.long	__proc_info_end
-3:	.long	.
+4:	.long	.
 	.long	__arch_info_begin
 	.long	__arch_info_end
 
@@ -205,7 +208,7 @@ ENDPROC(lookup_processor_type)
  *  r5 = mach_info pointer in physical address space
  */
 __lookup_machine_type:
-	adr	r3, 3b
+	adr	r3, 4b
 	ldmia	r3, {r4, r5, r6}
 	sub	r3, r3, r4			@ get offset between virt&phys
 	add	r5, r5, r3			@ convert virt addresses to
diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S
index cc87e1765ed..b16393d2b71 100644
--- a/arch/arm/kernel/head-nommu.S
+++ b/arch/arm/kernel/head-nommu.S
@@ -34,7 +34,7 @@
  */
 	.section ".text.head", "ax"
 ENTRY(stext)
-	msr	cpsr_c, #PSR_F_BIT | PSR_I_BIT | SVC_MODE @ ensure svc mode
+	setmode	PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9 @ ensure svc mode
 						@ and irqs disabled
 #ifndef CONFIG_CPU_CP15
 	ldr	r9, =CONFIG_PROCESSOR_ID
@@ -50,8 +50,10 @@ ENTRY(stext)
 
 	ldr	r13, __switch_data		@ address to jump to after
 						@ the initialization is done
-	adr	lr, __after_proc_init		@ return (PIC) address
-	add	pc, r10, #PROCINFO_INITFUNC
+	adr	lr, BSYM(__after_proc_init)	@ return (PIC) address
+ ARM(	add	pc, r10, #PROCINFO_INITFUNC	)
+ THUMB(	add	r12, r10, #PROCINFO_INITFUNC	)
+ THUMB(	mov	pc, r12				)
 ENDPROC(stext)
 
 /*
@@ -82,7 +84,8 @@ __after_proc_init:
 	mcr	p15, 0, r0, c1, c0, 0		@ write control reg
 #endif /* CONFIG_CPU_CP15 */
 
-	mov	pc, r13				@ clear the BSS and jump
+	mov	r3, r13
+	mov	pc, r3				@ clear the BSS and jump
 						@ to start_kernel
 ENDPROC(__after_proc_init)
 	.ltorg
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index 21e17dc94cb..38ccbe1d3b2 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -76,7 +76,7 @@
  */
 	.section ".text.head", "ax"
 ENTRY(stext)
-	msr	cpsr_c, #PSR_F_BIT | PSR_I_BIT | SVC_MODE @ ensure svc mode
+	setmode	PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9 @ ensure svc mode
 						@ and irqs disabled
 	mrc	p15, 0, r9, c0, c0		@ get processor id
 	bl	__lookup_processor_type		@ r5=procinfo r9=cpuid
@@ -97,8 +97,10 @@ ENTRY(stext)
 	 */
 	ldr	r13, __switch_data		@ address to jump to after
 						@ mmu has been enabled
-	adr	lr, __enable_mmu		@ return (PIC) address
-	add	pc, r10, #PROCINFO_INITFUNC
+	adr	lr, BSYM(__enable_mmu)		@ return (PIC) address
+ ARM(	add	pc, r10, #PROCINFO_INITFUNC	)
+ THUMB(	add	r12, r10, #PROCINFO_INITFUNC	)
+ THUMB(	mov	pc, r12				)
 ENDPROC(stext)
 
 #if defined(CONFIG_SMP)
@@ -110,7 +112,7 @@ ENTRY(secondary_startup)
 	 * the processor type - there is no need to check the machine type
 	 * as it has already been validated by the primary processor.
 	 */
-	msr	cpsr_c, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
+	setmode	PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9
 	mrc	p15, 0, r9, c0, c0		@ get processor id
 	bl	__lookup_processor_type
 	movs	r10, r5				@ invalid processor?
@@ -121,12 +123,15 @@ ENTRY(secondary_startup)
 	 * Use the page tables supplied from  __cpu_up.
 	 */
 	adr	r4, __secondary_data
-	ldmia	r4, {r5, r7, r13}		@ address to jump to after
+	ldmia	r4, {r5, r7, r12}		@ address to jump to after
 	sub	r4, r4, r5			@ mmu has been enabled
 	ldr	r4, [r7, r4]			@ get secondary_data.pgdir
-	adr	lr, __enable_mmu		@ return address
-	add	pc, r10, #PROCINFO_INITFUNC	@ initialise processor
-						@ (return control reg)
+	adr	lr, BSYM(__enable_mmu)		@ return address
+	mov	r13, r12			@ __secondary_switched address
+ ARM(	add	pc, r10, #PROCINFO_INITFUNC	) @ initialise processor
+						  @ (return control reg)
+ THUMB(	add	r12, r10, #PROCINFO_INITFUNC	)
+ THUMB(	mov	pc, r12				)
 ENDPROC(secondary_startup)
 
 	/*
@@ -193,8 +198,8 @@ __turn_mmu_on:
 	mcr	p15, 0, r0, c1, c0, 0		@ write control reg
 	mrc	p15, 0, r3, c0, c0, 0		@ read id reg
 	mov	r3, r3
-	mov	r3, r3
-	mov	pc, r13
+	mov	r3, r13
+	mov	pc, r3
 ENDPROC(__turn_mmu_on)
 
 
@@ -235,7 +240,8 @@ __create_page_tables:
 	 * will be removed by paging_init().  We use our current program
 	 * counter to determine corresponding section base address.
 	 */
-	mov	r6, pc, lsr #20			@ start of kernel section
+	mov	r6, pc
+	mov	r6, r6, lsr #20			@ start of kernel section
 	orr	r3, r7, r6, lsl #20		@ flags + kernel base
 	str	r3, [r4, r6, lsl #2]		@ identity mapping
 
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index 39196dff478..790fbee92ec 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -388,7 +388,7 @@ pid_t kernel_thread(int (*fn)(void *), void *arg, unsigned long flags)
 	regs.ARM_r2 = (unsigned long)fn;
 	regs.ARM_r3 = (unsigned long)kernel_thread_exit;
 	regs.ARM_pc = (unsigned long)kernel_thread_helper;
-	regs.ARM_cpsr = SVC_MODE | PSR_ENDSTATE;
+	regs.ARM_cpsr = SVC_MODE | PSR_ENDSTATE | PSR_ISETSTATE;
 
 	return do_fork(flags|CLONE_VM|CLONE_UNTRACED, 0, &regs, 0, NULL, NULL);
 }
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index bc5e4128f9f..d4d4f77c91b 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -25,6 +25,7 @@
 #include <linux/smp.h>
 #include <linux/fs.h>
 
+#include <asm/unified.h>
 #include <asm/cpu.h>
 #include <asm/cputype.h>
 #include <asm/elf.h>
@@ -326,26 +327,39 @@ void cpu_init(void)
 		BUG();
 	}
 
+	/*
+	 * Define the placement constraint for the inline asm directive below.
+	 * In Thumb-2, msr with an immediate value is not allowed.
+	 */
+#ifdef CONFIG_THUMB2_KERNEL
+#define PLC	"r"
+#else
+#define PLC	"I"
+#endif
+
 	/*
 	 * setup stacks for re-entrant exception handlers
 	 */
 	__asm__ (
 	"msr	cpsr_c, %1\n\t"
-	"add	sp, %0, %2\n\t"
+	"add	r14, %0, %2\n\t"
+	"mov	sp, r14\n\t"
 	"msr	cpsr_c, %3\n\t"
-	"add	sp, %0, %4\n\t"
+	"add	r14, %0, %4\n\t"
+	"mov	sp, r14\n\t"
 	"msr	cpsr_c, %5\n\t"
-	"add	sp, %0, %6\n\t"
+	"add	r14, %0, %6\n\t"
+	"mov	sp, r14\n\t"
 	"msr	cpsr_c, %7"
 	    :
 	    : "r" (stk),
-	      "I" (PSR_F_BIT | PSR_I_BIT | IRQ_MODE),
+	      PLC (PSR_F_BIT | PSR_I_BIT | IRQ_MODE),
 	      "I" (offsetof(struct stack, irq[0])),
-	      "I" (PSR_F_BIT | PSR_I_BIT | ABT_MODE),
+	      PLC (PSR_F_BIT | PSR_I_BIT | ABT_MODE),
 	      "I" (offsetof(struct stack, abt[0])),
-	      "I" (PSR_F_BIT | PSR_I_BIT | UND_MODE),
+	      PLC (PSR_F_BIT | PSR_I_BIT | UND_MODE),
 	      "I" (offsetof(struct stack, und[0])),
-	      "I" (PSR_F_BIT | PSR_I_BIT | SVC_MODE)
+	      PLC (PSR_F_BIT | PSR_I_BIT | SVC_MODE)
 	    : "r14");
 }
 
diff --git a/arch/arm/kernel/unwind.c b/arch/arm/kernel/unwind.c
index dd56e11f339..39baf1128bf 100644
--- a/arch/arm/kernel/unwind.c
+++ b/arch/arm/kernel/unwind.c
@@ -62,7 +62,11 @@ struct unwind_ctrl_block {
 };
 
 enum regs {
+#ifdef CONFIG_THUMB2_KERNEL
+	FP = 7,
+#else
 	FP = 11,
+#endif
 	SP = 13,
 	LR = 14,
 	PC = 15
-- 
cgit v1.2.3


From 347c8b70b1d5256e445e54e736f88d21877616cf Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:32:56 +0100
Subject: Thumb-2: Implement the unified arch/arm/mm support

This patch adds the ARM/Thumb-2 unified support to the arch/arm/mm/*
files.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/mm/alignment.c | 20 +++++++++++++++-----
 arch/arm/mm/cache-v7.S  | 16 +++++++++++-----
 arch/arm/mm/proc-v7.S   |  5 ++++-
 3 files changed, 30 insertions(+), 11 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c
index 03cd27d917b..b270d6228fe 100644
--- a/arch/arm/mm/alignment.c
+++ b/arch/arm/mm/alignment.c
@@ -159,7 +159,9 @@ union offset_union {
 
 #define __get8_unaligned_check(ins,val,addr,err)	\
 	__asm__(					\
-	"1:	"ins"	%1, [%2], #1\n"			\
+ ARM(	"1:	"ins"	%1, [%2], #1\n"	)		\
+ THUMB(	"1:	"ins"	%1, [%2]\n"	)		\
+ THUMB(	"	add	%2, %2, #1\n"	)		\
 	"2:\n"						\
 	"	.section .fixup,\"ax\"\n"		\
 	"	.align	2\n"				\
@@ -215,7 +217,9 @@ union offset_union {
 	do {							\
 		unsigned int err = 0, v = val, a = addr;	\
 		__asm__( FIRST_BYTE_16				\
-		"1:	"ins"	%1, [%2], #1\n"			\
+	 ARM(	"1:	"ins"	%1, [%2], #1\n"	)		\
+	 THUMB(	"1:	"ins"	%1, [%2]\n"	)		\
+	 THUMB(	"	add	%2, %2, #1\n"	)		\
 		"	mov	%1, %1, "NEXT_BYTE"\n"		\
 		"2:	"ins"	%1, [%2]\n"			\
 		"3:\n"						\
@@ -245,11 +249,17 @@ union offset_union {
 	do {							\
 		unsigned int err = 0, v = val, a = addr;	\
 		__asm__( FIRST_BYTE_32				\
-		"1:	"ins"	%1, [%2], #1\n"			\
+	 ARM(	"1:	"ins"	%1, [%2], #1\n"	)		\
+	 THUMB(	"1:	"ins"	%1, [%2]\n"	)		\
+	 THUMB(	"	add	%2, %2, #1\n"	)		\
 		"	mov	%1, %1, "NEXT_BYTE"\n"		\
-		"2:	"ins"	%1, [%2], #1\n"			\
+	 ARM(	"2:	"ins"	%1, [%2], #1\n"	)		\
+	 THUMB(	"2:	"ins"	%1, [%2]\n"	)		\
+	 THUMB(	"	add	%2, %2, #1\n"	)		\
 		"	mov	%1, %1, "NEXT_BYTE"\n"		\
-		"3:	"ins"	%1, [%2], #1\n"			\
+	 ARM(	"3:	"ins"	%1, [%2], #1\n"	)		\
+	 THUMB(	"3:	"ins"	%1, [%2]\n"	)		\
+	 THUMB(	"	add	%2, %2, #1\n"	)		\
 		"	mov	%1, %1, "NEXT_BYTE"\n"		\
 		"4:	"ins"	%1, [%2]\n"			\
 		"5:\n"						\
diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S
index be93ff02a98..bda0ec31a4e 100644
--- a/arch/arm/mm/cache-v7.S
+++ b/arch/arm/mm/cache-v7.S
@@ -21,7 +21,7 @@
  *
  *	Flush the whole D-cache.
  *
- *	Corrupted registers: r0-r5, r7, r9-r11
+ *	Corrupted registers: r0-r7, r9-r11 (r6 only in Thumb mode)
  *
  *	- mm    - mm_struct describing address space
  */
@@ -51,8 +51,12 @@ loop1:
 loop2:
 	mov	r9, r4				@ create working copy of max way size
 loop3:
-	orr	r11, r10, r9, lsl r5		@ factor way and cache number into r11
-	orr	r11, r11, r7, lsl r2		@ factor index number into r11
+ ARM(	orr	r11, r10, r9, lsl r5	)	@ factor way and cache number into r11
+ THUMB(	lsl	r6, r9, r5		)
+ THUMB(	orr	r11, r10, r6		)	@ factor way and cache number into r11
+ ARM(	orr	r11, r11, r7, lsl r2	)	@ factor index number into r11
+ THUMB(	lsl	r6, r7, r2		)
+ THUMB(	orr	r11, r11, r6		)	@ factor index number into r11
 	mcr	p15, 0, r11, c7, c14, 2		@ clean & invalidate by set/way
 	subs	r9, r9, #1			@ decrement the way
 	bge	loop3
@@ -82,11 +86,13 @@ ENDPROC(v7_flush_dcache_all)
  *
  */
 ENTRY(v7_flush_kern_cache_all)
-	stmfd	sp!, {r4-r5, r7, r9-r11, lr}
+ ARM(	stmfd	sp!, {r4-r5, r7, r9-r11, lr}	)
+ THUMB(	stmfd	sp!, {r4-r7, r9-r11, lr}	)
 	bl	v7_flush_dcache_all
 	mov	r0, #0
 	mcr	p15, 0, r0, c7, c5, 0		@ I+BTB cache invalidate
-	ldmfd	sp!, {r4-r5, r7, r9-r11, lr}
+ ARM(	ldmfd	sp!, {r4-r5, r7, r9-r11, lr}	)
+ THUMB(	ldmfd	sp!, {r4-r7, r9-r11, lr}	)
 	mov	pc, lr
 ENDPROC(v7_flush_kern_cache_all)
 
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index 180a08d03a0..c19aecdb202 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -127,7 +127,9 @@ ENDPROC(cpu_v7_switch_mm)
  */
 ENTRY(cpu_v7_set_pte_ext)
 #ifdef CONFIG_MMU
-	str	r1, [r0], #-2048		@ linux version
+ ARM(	str	r1, [r0], #-2048	)	@ linux version
+ THUMB(	str	r1, [r0]		)	@ linux version
+ THUMB(	sub	r0, r0, #2048		)
 
 	bic	r3, r1, #0x000003f0
 	bic	r3, r3, #PTE_TYPE_MASK
@@ -273,6 +275,7 @@ __v7_setup:
    	mrc	p15, 0, r0, c1, c0, 0		@ read control register
 	bic	r0, r0, r5			@ clear bits them
 	orr	r0, r0, r6			@ set them
+ THUMB(	orr	r0, r0, #1 << 30	)	@ Thumb exceptions
 	mov	pc, lr				@ return to head.S:__ret
 ENDPROC(__v7_setup)
 
-- 
cgit v1.2.3


From 8b592783a2e8b7721a99730bd549aab5208f36af Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:32:57 +0100
Subject: Thumb-2: Implement the unified arch/arm/lib functions

This patch adds the ARM/Thumb-2 unified support for the arch/arm/lib/*
files.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/include/asm/assembler.h   | 73 ++++++++++++++++++++++++++++++++++++++
 arch/arm/include/asm/uaccess.h     |  7 ++--
 arch/arm/lib/ashldi3.S             |  4 ++-
 arch/arm/lib/ashrdi3.S             |  4 ++-
 arch/arm/lib/backtrace.S           |  8 +++--
 arch/arm/lib/clear_user.S          | 15 ++++----
 arch/arm/lib/copy_from_user.S      | 19 +++++-----
 arch/arm/lib/copy_template.S       | 24 +++++++++++--
 arch/arm/lib/copy_to_user.S        | 19 +++++-----
 arch/arm/lib/csumpartialcopyuser.S | 48 +++++++------------------
 arch/arm/lib/div64.S               |  4 ++-
 arch/arm/lib/findbit.S             | 34 +++++++++++++-----
 arch/arm/lib/getuser.S             |  5 +++
 arch/arm/lib/io-writesw-armv4.S    |  5 ++-
 arch/arm/lib/lshrdi3.S             |  4 ++-
 arch/arm/lib/memcpy.S              |  7 ++--
 arch/arm/lib/memmove.S             | 28 +++++++--------
 arch/arm/lib/putuser.S             | 15 ++++++++
 arch/arm/lib/strncpy_from_user.S   |  2 +-
 arch/arm/lib/strnlen_user.S        |  2 +-
 20 files changed, 229 insertions(+), 98 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h
index 1acd1da36d0..2b60c7d0577 100644
--- a/arch/arm/include/asm/assembler.h
+++ b/arch/arm/include/asm/assembler.h
@@ -138,3 +138,76 @@
 	msr	cpsr_c, #\mode
 	.endm
 #endif
+
+/*
+ * STRT/LDRT access macros with ARM and Thumb-2 variants
+ */
+#ifdef CONFIG_THUMB2_KERNEL
+
+	.macro	usraccoff, instr, reg, ptr, inc, off, cond, abort
+9999:
+	.if	\inc == 1
+	\instr\cond\()bt \reg, [\ptr, #\off]
+	.elseif	\inc == 4
+	\instr\cond\()t \reg, [\ptr, #\off]
+	.else
+	.error	"Unsupported inc macro argument"
+	.endif
+
+	.section __ex_table,"a"
+	.align	3
+	.long	9999b, \abort
+	.previous
+	.endm
+
+	.macro	usracc, instr, reg, ptr, inc, cond, rept, abort
+	@ explicit IT instruction needed because of the label
+	@ introduced by the USER macro
+	.ifnc	\cond,al
+	.if	\rept == 1
+	itt	\cond
+	.elseif	\rept == 2
+	ittt	\cond
+	.else
+	.error	"Unsupported rept macro argument"
+	.endif
+	.endif
+
+	@ Slightly optimised to avoid incrementing the pointer twice
+	usraccoff \instr, \reg, \ptr, \inc, 0, \cond, \abort
+	.if	\rept == 2
+	usraccoff \instr, \reg, \ptr, \inc, 4, \cond, \abort
+	.endif
+
+	add\cond \ptr, #\rept * \inc
+	.endm
+
+#else	/* !CONFIG_THUMB2_KERNEL */
+
+	.macro	usracc, instr, reg, ptr, inc, cond, rept, abort
+	.rept	\rept
+9999:
+	.if	\inc == 1
+	\instr\cond\()bt \reg, [\ptr], #\inc
+	.elseif	\inc == 4
+	\instr\cond\()t \reg, [\ptr], #\inc
+	.else
+	.error	"Unsupported inc macro argument"
+	.endif
+
+	.section __ex_table,"a"
+	.align	3
+	.long	9999b, \abort
+	.previous
+	.endr
+	.endm
+
+#endif	/* CONFIG_THUMB2_KERNEL */
+
+	.macro	strusr, reg, ptr, inc, cond=al, rept=1, abort=9001f
+	usracc	str, \reg, \ptr, \inc, \cond, \rept, \abort
+	.endm
+
+	.macro	ldrusr, reg, ptr, inc, cond=al, rept=1, abort=9001f
+	usracc	ldr, \reg, \ptr, \inc, \cond, \rept, \abort
+	.endm
diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h
index 0da9bc9b3b1..1d6bd40a432 100644
--- a/arch/arm/include/asm/uaccess.h
+++ b/arch/arm/include/asm/uaccess.h
@@ -17,6 +17,7 @@
 #include <asm/memory.h>
 #include <asm/domain.h>
 #include <asm/system.h>
+#include <asm/unified.h>
 
 #define VERIFY_READ 0
 #define VERIFY_WRITE 1
@@ -365,8 +366,10 @@ do {									\
 
 #define __put_user_asm_dword(x,__pu_addr,err)			\
 	__asm__ __volatile__(					\
-	"1:	strt	" __reg_oper1 ", [%1], #4\n"		\
-	"2:	strt	" __reg_oper0 ", [%1]\n"		\
+ ARM(	"1:	strt	" __reg_oper1 ", [%1], #4\n"	)	\
+ ARM(	"2:	strt	" __reg_oper0 ", [%1]\n"	)	\
+ THUMB(	"1:	strt	" __reg_oper1 ", [%1]\n"	)	\
+ THUMB(	"2:	strt	" __reg_oper0 ", [%1, #4]\n"	)	\
 	"3:\n"							\
 	"	.section .fixup,\"ax\"\n"			\
 	"	.align	2\n"					\
diff --git a/arch/arm/lib/ashldi3.S b/arch/arm/lib/ashldi3.S
index 1154d924080..638deb13da1 100644
--- a/arch/arm/lib/ashldi3.S
+++ b/arch/arm/lib/ashldi3.S
@@ -43,7 +43,9 @@ ENTRY(__aeabi_llsl)
 	rsb	ip, r2, #32
 	movmi	ah, ah, lsl r2
 	movpl	ah, al, lsl r3
-	orrmi	ah, ah, al, lsr ip
+ ARM(	orrmi	ah, ah, al, lsr ip	)
+ THUMB(	lsrmi	r3, al, ip		)
+ THUMB(	orrmi	ah, ah, r3		)
 	mov	al, al, lsl r2
 	mov	pc, lr
 
diff --git a/arch/arm/lib/ashrdi3.S b/arch/arm/lib/ashrdi3.S
index 9f8b35572f8..015e8aa5a1d 100644
--- a/arch/arm/lib/ashrdi3.S
+++ b/arch/arm/lib/ashrdi3.S
@@ -43,7 +43,9 @@ ENTRY(__aeabi_lasr)
 	rsb	ip, r2, #32
 	movmi	al, al, lsr r2
 	movpl	al, ah, asr r3
-	orrmi	al, al, ah, lsl ip
+ ARM(	orrmi	al, al, ah, lsl ip	)
+ THUMB(	lslmi	r3, ah, ip		)
+ THUMB(	orrmi	al, al, r3		)
 	mov	ah, ah, asr r2
 	mov	pc, lr
 
diff --git a/arch/arm/lib/backtrace.S b/arch/arm/lib/backtrace.S
index b0951d0e8b2..aaf7220d9e3 100644
--- a/arch/arm/lib/backtrace.S
+++ b/arch/arm/lib/backtrace.S
@@ -38,7 +38,9 @@ ENDPROC(c_backtrace)
 		beq	no_frame		@ we have no stack frames
 
 		tst	r1, #0x10		@ 26 or 32-bit mode?
-		moveq	mask, #0xfc000003	@ mask for 26-bit
+ ARM(		moveq	mask, #0xfc000003	)
+ THUMB(		moveq	mask, #0xfc000000	)
+ THUMB(		orreq	mask, #0x03		)
 		movne	mask, #0		@ mask for 32-bit
 
 1:		stmfd	sp!, {pc}		@ calculate offset of PC stored
@@ -126,7 +128,9 @@ ENDPROC(c_backtrace)
 		mov	reg, #10
 		mov	r7, #0
 1:		mov	r3, #1
-		tst	instr, r3, lsl reg
+ ARM(		tst	instr, r3, lsl reg	)
+ THUMB(		lsl	r3, reg			)
+ THUMB(		tst	instr, r3		)
 		beq	2f
 		add	r7, r7, #1
 		teq	r7, #6
diff --git a/arch/arm/lib/clear_user.S b/arch/arm/lib/clear_user.S
index 844f56785eb..1279abd8b88 100644
--- a/arch/arm/lib/clear_user.S
+++ b/arch/arm/lib/clear_user.S
@@ -27,21 +27,20 @@ WEAK(__clear_user)
 		ands	ip, r0, #3
 		beq	1f
 		cmp	ip, #2
-USER(		strbt	r2, [r0], #1)
-USER(		strlebt	r2, [r0], #1)
-USER(		strltbt	r2, [r0], #1)
+		strusr	r2, r0, 1
+		strusr	r2, r0, 1, le
+		strusr	r2, r0, 1, lt
 		rsb	ip, ip, #4
 		sub	r1, r1, ip		@  7  6  5  4  3  2  1
 1:		subs	r1, r1, #8		@ -1 -2 -3 -4 -5 -6 -7
-USER(		strplt	r2, [r0], #4)
-USER(		strplt	r2, [r0], #4)
+		strusr	r2, r0, 4, pl, rept=2
 		bpl	1b
 		adds	r1, r1, #4		@  3  2  1  0 -1 -2 -3
-USER(		strplt	r2, [r0], #4)
+		strusr	r2, r0, 4, pl
 2:		tst	r1, #2			@ 1x 1x 0x 0x 1x 1x 0x
-USER(		strnebt	r2, [r0], #1)
-USER(		strnebt	r2, [r0], #1)
+		strusr	r2, r0, 1, ne, rept=2
 		tst	r1, #1			@ x1 x0 x1 x0 x1 x0 x1
+		it	ne			@ explicit IT needed for the label
 USER(		strnebt	r2, [r0])
 		mov	r0, #0
 		ldmfd	sp!, {r1, pc}
diff --git a/arch/arm/lib/copy_from_user.S b/arch/arm/lib/copy_from_user.S
index 56799a165cc..e4fe124aced 100644
--- a/arch/arm/lib/copy_from_user.S
+++ b/arch/arm/lib/copy_from_user.S
@@ -33,11 +33,15 @@
  *	Number of bytes NOT copied.
  */
 
+#ifndef CONFIG_THUMB2_KERNEL
+#define LDR1W_SHIFT	0
+#else
+#define LDR1W_SHIFT	1
+#endif
+#define STR1W_SHIFT	0
+
 	.macro ldr1w ptr reg abort
-100:	ldrt \reg, [\ptr], #4
-	.section __ex_table, "a"
-	.long 100b, \abort
-	.previous
+	ldrusr	\reg, \ptr, 4, abort=\abort
 	.endm
 
 	.macro ldr4w ptr reg1 reg2 reg3 reg4 abort
@@ -53,14 +57,11 @@
 	.endm
 
 	.macro ldr1b ptr reg cond=al abort
-100:	ldr\cond\()bt \reg, [\ptr], #1
-	.section __ex_table, "a"
-	.long 100b, \abort
-	.previous
+	ldrusr	\reg, \ptr, 1, \cond, abort=\abort
 	.endm
 
 	.macro str1w ptr reg abort
-	str \reg, [\ptr], #4
+	W(str) \reg, [\ptr], #4
 	.endm
 
 	.macro str8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
diff --git a/arch/arm/lib/copy_template.S b/arch/arm/lib/copy_template.S
index 139cce64605..805e3f8fb00 100644
--- a/arch/arm/lib/copy_template.S
+++ b/arch/arm/lib/copy_template.S
@@ -57,6 +57,13 @@
  *
  *	Restore registers with the values previously saved with the
  *	'preserv' macro. Called upon code termination.
+ *
+ * LDR1W_SHIFT
+ * STR1W_SHIFT
+ *
+ *	Correction to be applied to the "ip" register when branching into
+ *	the ldr1w or str1w instructions (some of these macros may expand to
+ *	than one 32bit instruction in Thumb-2)
  */
 
 
@@ -99,9 +106,15 @@
 
 5:		ands	ip, r2, #28
 		rsb	ip, ip, #32
+#if LDR1W_SHIFT > 0
+		lsl	ip, ip, #LDR1W_SHIFT
+#endif
 		addne	pc, pc, ip		@ C is always clear here
 		b	7f
-6:		nop
+6:
+		.rept	(1 << LDR1W_SHIFT)
+		W(nop)
+		.endr
 		ldr1w	r1, r3, abort=20f
 		ldr1w	r1, r4, abort=20f
 		ldr1w	r1, r5, abort=20f
@@ -110,9 +123,16 @@
 		ldr1w	r1, r8, abort=20f
 		ldr1w	r1, lr, abort=20f
 
+#if LDR1W_SHIFT < STR1W_SHIFT
+		lsl	ip, ip, #STR1W_SHIFT - LDR1W_SHIFT
+#elif LDR1W_SHIFT > STR1W_SHIFT
+		lsr	ip, ip, #LDR1W_SHIFT - STR1W_SHIFT
+#endif
 		add	pc, pc, ip
 		nop
-		nop
+		.rept	(1 << STR1W_SHIFT)
+		W(nop)
+		.endr
 		str1w	r0, r3, abort=20f
 		str1w	r0, r4, abort=20f
 		str1w	r0, r5, abort=20f
diff --git a/arch/arm/lib/copy_to_user.S b/arch/arm/lib/copy_to_user.S
index 878820f0a32..1a71e158444 100644
--- a/arch/arm/lib/copy_to_user.S
+++ b/arch/arm/lib/copy_to_user.S
@@ -33,8 +33,15 @@
  *	Number of bytes NOT copied.
  */
 
+#define LDR1W_SHIFT	0
+#ifndef CONFIG_THUMB2_KERNEL
+#define STR1W_SHIFT	0
+#else
+#define STR1W_SHIFT	1
+#endif
+
 	.macro ldr1w ptr reg abort
-	ldr \reg, [\ptr], #4
+	W(ldr) \reg, [\ptr], #4
 	.endm
 
 	.macro ldr4w ptr reg1 reg2 reg3 reg4 abort
@@ -50,10 +57,7 @@
 	.endm
 
 	.macro str1w ptr reg abort
-100:	strt \reg, [\ptr], #4
-	.section __ex_table, "a"
-	.long 100b, \abort
-	.previous
+	strusr	\reg, \ptr, 4, abort=\abort
 	.endm
 
 	.macro str8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
@@ -68,10 +72,7 @@
 	.endm
 
 	.macro str1b ptr reg cond=al abort
-100:	str\cond\()bt \reg, [\ptr], #1
-	.section __ex_table, "a"
-	.long 100b, \abort
-	.previous
+	strusr	\reg, \ptr, 1, \cond, abort=\abort
 	.endm
 
 	.macro enter reg1 reg2
diff --git a/arch/arm/lib/csumpartialcopyuser.S b/arch/arm/lib/csumpartialcopyuser.S
index 14677fb4b0c..fd0e9dcd9fd 100644
--- a/arch/arm/lib/csumpartialcopyuser.S
+++ b/arch/arm/lib/csumpartialcopyuser.S
@@ -26,50 +26,28 @@
 		.endm
 
 		.macro	load1b,	reg1
-9999:		ldrbt	\reg1, [r0], $1
-		.section __ex_table, "a"
-		.align	3
-		.long	9999b, 6001f
-		.previous
+		ldrusr	\reg1, r0, 1
 		.endm
 
 		.macro	load2b, reg1, reg2
-9999:		ldrbt	\reg1, [r0], $1
-9998:		ldrbt	\reg2, [r0], $1
-		.section __ex_table, "a"
-		.long	9999b, 6001f
-		.long	9998b, 6001f
-		.previous
+		ldrusr	\reg1, r0, 1
+		ldrusr	\reg2, r0, 1
 		.endm
 
 		.macro	load1l, reg1
-9999:		ldrt	\reg1, [r0], $4
-		.section __ex_table, "a"
-		.align	3
-		.long	9999b, 6001f
-		.previous
+		ldrusr	\reg1, r0, 4
 		.endm
 
 		.macro	load2l, reg1, reg2
-9999:		ldrt	\reg1, [r0], $4
-9998:		ldrt	\reg2, [r0], $4
-		.section __ex_table, "a"
-		.long	9999b, 6001f
-		.long	9998b, 6001f
-		.previous
+		ldrusr	\reg1, r0, 4
+		ldrusr	\reg2, r0, 4
 		.endm
 
 		.macro	load4l, reg1, reg2, reg3, reg4
-9999:		ldrt	\reg1, [r0], $4
-9998:		ldrt	\reg2, [r0], $4
-9997:		ldrt	\reg3, [r0], $4
-9996:		ldrt	\reg4, [r0], $4
-		.section __ex_table, "a"
-		.long	9999b, 6001f
-		.long	9998b, 6001f
-		.long	9997b, 6001f
-		.long	9996b, 6001f
-		.previous
+		ldrusr	\reg1, r0, 4
+		ldrusr	\reg2, r0, 4
+		ldrusr	\reg3, r0, 4
+		ldrusr	\reg4, r0, 4
 		.endm
 
 /*
@@ -92,14 +70,14 @@
  */
 		.section .fixup,"ax"
 		.align	4
-6001:		mov	r4, #-EFAULT
+9001:		mov	r4, #-EFAULT
 		ldr	r5, [fp, #4]		@ *err_ptr
 		str	r4, [r5]
 		ldmia	sp, {r1, r2}		@ retrieve dst, len
 		add	r2, r2, r1
 		mov	r0, #0			@ zero the buffer
-6002:		teq	r2, r1
+9002:		teq	r2, r1
 		strneb	r0, [r1], #1
-		bne	6002b
+		bne	9002b
 		load_regs
 		.previous
diff --git a/arch/arm/lib/div64.S b/arch/arm/lib/div64.S
index 1425e789ba8..faa7748142d 100644
--- a/arch/arm/lib/div64.S
+++ b/arch/arm/lib/div64.S
@@ -177,7 +177,9 @@ ENTRY(__do_div64)
 	mov	yh, xh, lsr ip
 	mov	yl, xl, lsr ip
 	rsb	ip, ip, #32
-	orr	yl, yl, xh, lsl ip
+ ARM(	orr	yl, yl, xh, lsl ip	)
+ THUMB(	lsl	xh, xh, ip		)
+ THUMB(	orr	yl, yl, xh		)
 	mov	xh, xl, lsl ip
 	mov	xh, xh, lsr ip
 	mov	pc, lr
diff --git a/arch/arm/lib/findbit.S b/arch/arm/lib/findbit.S
index 8c4defc4f3c..1e4cbd4e7be 100644
--- a/arch/arm/lib/findbit.S
+++ b/arch/arm/lib/findbit.S
@@ -25,7 +25,10 @@ ENTRY(_find_first_zero_bit_le)
 		teq	r1, #0	
 		beq	3f
 		mov	r2, #0
-1:		ldrb	r3, [r0, r2, lsr #3]
+1:
+ ARM(		ldrb	r3, [r0, r2, lsr #3]	)
+ THUMB(		lsr	r3, r2, #3		)
+ THUMB(		ldrb	r3, [r0, r3]		)
 		eors	r3, r3, #0xff		@ invert bits
 		bne	.L_found		@ any now set - found zero bit
 		add	r2, r2, #8		@ next bit pointer
@@ -44,7 +47,9 @@ ENTRY(_find_next_zero_bit_le)
 		beq	3b
 		ands	ip, r2, #7
 		beq	1b			@ If new byte, goto old routine
-		ldrb	r3, [r0, r2, lsr #3]
+ ARM(		ldrb	r3, [r0, r2, lsr #3]	)
+ THUMB(		lsr	r3, r2, #3		)
+ THUMB(		ldrb	r3, [r0, r3]		)
 		eor	r3, r3, #0xff		@ now looking for a 1 bit
 		movs	r3, r3, lsr ip		@ shift off unused bits
 		bne	.L_found
@@ -61,7 +66,10 @@ ENTRY(_find_first_bit_le)
 		teq	r1, #0	
 		beq	3f
 		mov	r2, #0
-1:		ldrb	r3, [r0, r2, lsr #3]
+1:
+ ARM(		ldrb	r3, [r0, r2, lsr #3]	)
+ THUMB(		lsr	r3, r2, #3		)
+ THUMB(		ldrb	r3, [r0, r3]		)
 		movs	r3, r3
 		bne	.L_found		@ any now set - found zero bit
 		add	r2, r2, #8		@ next bit pointer
@@ -80,7 +88,9 @@ ENTRY(_find_next_bit_le)
 		beq	3b
 		ands	ip, r2, #7
 		beq	1b			@ If new byte, goto old routine
-		ldrb	r3, [r0, r2, lsr #3]
+ ARM(		ldrb	r3, [r0, r2, lsr #3]	)
+ THUMB(		lsr	r3, r2, #3		)
+ THUMB(		ldrb	r3, [r0, r3]		)
 		movs	r3, r3, lsr ip		@ shift off unused bits
 		bne	.L_found
 		orr	r2, r2, #7		@ if zero, then no bits here
@@ -95,7 +105,9 @@ ENTRY(_find_first_zero_bit_be)
 		beq	3f
 		mov	r2, #0
 1:		eor	r3, r2, #0x18		@ big endian byte ordering
-		ldrb	r3, [r0, r3, lsr #3]
+ ARM(		ldrb	r3, [r0, r3, lsr #3]	)
+ THUMB(		lsr	r3, #3			)
+ THUMB(		ldrb	r3, [r0, r3]		)
 		eors	r3, r3, #0xff		@ invert bits
 		bne	.L_found		@ any now set - found zero bit
 		add	r2, r2, #8		@ next bit pointer
@@ -111,7 +123,9 @@ ENTRY(_find_next_zero_bit_be)
 		ands	ip, r2, #7
 		beq	1b			@ If new byte, goto old routine
 		eor	r3, r2, #0x18		@ big endian byte ordering
-		ldrb	r3, [r0, r3, lsr #3]
+ ARM(		ldrb	r3, [r0, r3, lsr #3]	)
+ THUMB(		lsr	r3, #3			)
+ THUMB(		ldrb	r3, [r0, r3]		)
 		eor	r3, r3, #0xff		@ now looking for a 1 bit
 		movs	r3, r3, lsr ip		@ shift off unused bits
 		bne	.L_found
@@ -125,7 +139,9 @@ ENTRY(_find_first_bit_be)
 		beq	3f
 		mov	r2, #0
 1:		eor	r3, r2, #0x18		@ big endian byte ordering
-		ldrb	r3, [r0, r3, lsr #3]
+ ARM(		ldrb	r3, [r0, r3, lsr #3]	)
+ THUMB(		lsr	r3, #3			)
+ THUMB(		ldrb	r3, [r0, r3]		)
 		movs	r3, r3
 		bne	.L_found		@ any now set - found zero bit
 		add	r2, r2, #8		@ next bit pointer
@@ -141,7 +157,9 @@ ENTRY(_find_next_bit_be)
 		ands	ip, r2, #7
 		beq	1b			@ If new byte, goto old routine
 		eor	r3, r2, #0x18		@ big endian byte ordering
-		ldrb	r3, [r0, r3, lsr #3]
+ ARM(		ldrb	r3, [r0, r3, lsr #3]	)
+ THUMB(		lsr	r3, #3			)
+ THUMB(		ldrb	r3, [r0, r3]		)
 		movs	r3, r3, lsr ip		@ shift off unused bits
 		bne	.L_found
 		orr	r2, r2, #7		@ if zero, then no bits here
diff --git a/arch/arm/lib/getuser.S b/arch/arm/lib/getuser.S
index 6763088b760..a1814d92712 100644
--- a/arch/arm/lib/getuser.S
+++ b/arch/arm/lib/getuser.S
@@ -36,8 +36,13 @@ ENTRY(__get_user_1)
 ENDPROC(__get_user_1)
 
 ENTRY(__get_user_2)
+#ifdef CONFIG_THUMB2_KERNEL
+2:	ldrbt	r2, [r0]
+3:	ldrbt	r3, [r0, #1]
+#else
 2:	ldrbt	r2, [r0], #1
 3:	ldrbt	r3, [r0]
+#endif
 #ifndef __ARMEB__
 	orr	r2, r2, r3, lsl #8
 #else
diff --git a/arch/arm/lib/io-writesw-armv4.S b/arch/arm/lib/io-writesw-armv4.S
index d6585612c86..ff4f71b579e 100644
--- a/arch/arm/lib/io-writesw-armv4.S
+++ b/arch/arm/lib/io-writesw-armv4.S
@@ -75,7 +75,10 @@ ENTRY(__raw_writesw)
 #endif
 
 .Loutsw_noalign:
-		ldr	r3, [r1, -r3]!
+ ARM(		ldr	r3, [r1, -r3]!	)
+ THUMB(		rsb	r3, r3, #0	)
+ THUMB(		ldr	r3, [r1, r3]	)
+ THUMB(		sub	r1, r3		)
 		subcs	r2, r2, #1
 		bcs	2f
 		subs	r2, r2, #2
diff --git a/arch/arm/lib/lshrdi3.S b/arch/arm/lib/lshrdi3.S
index 99ea338bf87..f83d449141f 100644
--- a/arch/arm/lib/lshrdi3.S
+++ b/arch/arm/lib/lshrdi3.S
@@ -43,7 +43,9 @@ ENTRY(__aeabi_llsr)
 	rsb	ip, r2, #32
 	movmi	al, al, lsr r2
 	movpl	al, ah, lsr r3
-	orrmi	al, al, ah, lsl ip
+ ARM(	orrmi	al, al, ah, lsl ip	)
+ THUMB(	lslmi	r3, ah, ip		)
+ THUMB(	orrmi	al, al, r3		)
 	mov	ah, ah, lsr r2
 	mov	pc, lr
 
diff --git a/arch/arm/lib/memcpy.S b/arch/arm/lib/memcpy.S
index e0d002641d3..a9b9e2287a0 100644
--- a/arch/arm/lib/memcpy.S
+++ b/arch/arm/lib/memcpy.S
@@ -13,8 +13,11 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 
+#define LDR1W_SHIFT	0
+#define STR1W_SHIFT	0
+
 	.macro ldr1w ptr reg abort
-	ldr \reg, [\ptr], #4
+	W(ldr) \reg, [\ptr], #4
 	.endm
 
 	.macro ldr4w ptr reg1 reg2 reg3 reg4 abort
@@ -30,7 +33,7 @@
 	.endm
 
 	.macro str1w ptr reg abort
-	str \reg, [\ptr], #4
+	W(str) \reg, [\ptr], #4
 	.endm
 
 	.macro str8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
diff --git a/arch/arm/lib/memmove.S b/arch/arm/lib/memmove.S
index 12549187088..5025c863713 100644
--- a/arch/arm/lib/memmove.S
+++ b/arch/arm/lib/memmove.S
@@ -75,24 +75,24 @@ ENTRY(memmove)
 		addne	pc, pc, ip		@ C is always clear here
 		b	7f
 6:		nop
-		ldr	r3, [r1, #-4]!
-		ldr	r4, [r1, #-4]!
-		ldr	r5, [r1, #-4]!
-		ldr	r6, [r1, #-4]!
-		ldr	r7, [r1, #-4]!
-		ldr	r8, [r1, #-4]!
-		ldr	lr, [r1, #-4]!
+		W(ldr)	r3, [r1, #-4]!
+		W(ldr)	r4, [r1, #-4]!
+		W(ldr)	r5, [r1, #-4]!
+		W(ldr)	r6, [r1, #-4]!
+		W(ldr)	r7, [r1, #-4]!
+		W(ldr)	r8, [r1, #-4]!
+		W(ldr)	lr, [r1, #-4]!
 
 		add	pc, pc, ip
 		nop
 		nop
-		str	r3, [r0, #-4]!
-		str	r4, [r0, #-4]!
-		str	r5, [r0, #-4]!
-		str	r6, [r0, #-4]!
-		str	r7, [r0, #-4]!
-		str	r8, [r0, #-4]!
-		str	lr, [r0, #-4]!
+		W(str)	r3, [r0, #-4]!
+		W(str)	r4, [r0, #-4]!
+		W(str)	r5, [r0, #-4]!
+		W(str)	r6, [r0, #-4]!
+		W(str)	r7, [r0, #-4]!
+		W(str)	r8, [r0, #-4]!
+		W(str)	lr, [r0, #-4]!
 
 	CALGN(	bcs	2b			)
 
diff --git a/arch/arm/lib/putuser.S b/arch/arm/lib/putuser.S
index 864f3c1c4f1..02fedbf07c0 100644
--- a/arch/arm/lib/putuser.S
+++ b/arch/arm/lib/putuser.S
@@ -37,6 +37,15 @@ ENDPROC(__put_user_1)
 
 ENTRY(__put_user_2)
 	mov	ip, r2, lsr #8
+#ifdef CONFIG_THUMB2_KERNEL
+#ifndef __ARMEB__
+2:	strbt	r2, [r0]
+3:	strbt	ip, [r0, #1]
+#else
+2:	strbt	ip, [r0]
+3:	strbt	r2, [r0, #1]
+#endif
+#else	/* !CONFIG_THUMB2_KERNEL */
 #ifndef __ARMEB__
 2:	strbt	r2, [r0], #1
 3:	strbt	ip, [r0]
@@ -44,6 +53,7 @@ ENTRY(__put_user_2)
 2:	strbt	ip, [r0], #1
 3:	strbt	r2, [r0]
 #endif
+#endif	/* CONFIG_THUMB2_KERNEL */
 	mov	r0, #0
 	mov	pc, lr
 ENDPROC(__put_user_2)
@@ -55,8 +65,13 @@ ENTRY(__put_user_4)
 ENDPROC(__put_user_4)
 
 ENTRY(__put_user_8)
+#ifdef CONFIG_THUMB2_KERNEL
+5:	strt	r2, [r0]
+6:	strt	r3, [r0, #4]
+#else
 5:	strt	r2, [r0], #4
 6:	strt	r3, [r0]
+#endif
 	mov	r0, #0
 	mov	pc, lr
 ENDPROC(__put_user_8)
diff --git a/arch/arm/lib/strncpy_from_user.S b/arch/arm/lib/strncpy_from_user.S
index 330373c26dd..1c9814f346c 100644
--- a/arch/arm/lib/strncpy_from_user.S
+++ b/arch/arm/lib/strncpy_from_user.S
@@ -23,7 +23,7 @@
 ENTRY(__strncpy_from_user)
 	mov	ip, r1
 1:	subs	r2, r2, #1
-USER(	ldrplbt	r3, [r1], #1)
+	ldrusr	r3, r1, 1, pl
 	bmi	2f
 	strb	r3, [r0], #1
 	teq	r3, #0
diff --git a/arch/arm/lib/strnlen_user.S b/arch/arm/lib/strnlen_user.S
index 90bb9d02083..7855b290665 100644
--- a/arch/arm/lib/strnlen_user.S
+++ b/arch/arm/lib/strnlen_user.S
@@ -23,7 +23,7 @@
 ENTRY(__strnlen_user)
 	mov	r2, r0
 1:
-USER(	ldrbt	r3, [r0], #1)
+	ldrusr	r3, r0, 1
 	teq	r3, #0
 	beq	2f
 	subs	r1, r1, #1
-- 
cgit v1.2.3


From 07f33a035ddda78095bed64f39db54334776841d Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:32:57 +0100
Subject: Thumb-2: Implement the unified VFP support

This patch modifies the VFP files for the ARM/Thumb-2 unified
assembly syntax.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/vfp/vfphw.S | 48 ++++++++++++++++++++++++++++++++----------------
 1 file changed, 32 insertions(+), 16 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S
index 1aeae38725d..66dc2d03b7f 100644
--- a/arch/arm/vfp/vfphw.S
+++ b/arch/arm/vfp/vfphw.S
@@ -209,40 +209,55 @@ ENDPROC(vfp_save_state)
 last_VFP_context_address:
 	.word	last_VFP_context
 
-ENTRY(vfp_get_float)
-	add	pc, pc, r0, lsl #3
+	.macro	tbl_branch, base, tmp, shift
+#ifdef CONFIG_THUMB2_KERNEL
+	adr	\tmp, 1f
+	add	\tmp, \tmp, \base, lsl \shift
+	mov	pc, \tmp
+#else
+	add	pc, pc, \base, lsl \shift
 	mov	r0, r0
+#endif
+1:
+	.endm
+
+ENTRY(vfp_get_float)
+	tbl_branch r0, r3, #3
 	.irp	dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
-	mrc	p10, 0, r0, c\dr, c0, 0	@ fmrs	r0, s0
+1:	mrc	p10, 0, r0, c\dr, c0, 0	@ fmrs	r0, s0
 	mov	pc, lr
-	mrc	p10, 0, r0, c\dr, c0, 4	@ fmrs	r0, s1
+	.org	1b + 8
+1:	mrc	p10, 0, r0, c\dr, c0, 4	@ fmrs	r0, s1
 	mov	pc, lr
+	.org	1b + 8
 	.endr
 ENDPROC(vfp_get_float)
 
 ENTRY(vfp_put_float)
-	add	pc, pc, r1, lsl #3
-	mov	r0, r0
+	tbl_branch r1, r3, #3
 	.irp	dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
-	mcr	p10, 0, r0, c\dr, c0, 0	@ fmsr	r0, s0
+1:	mcr	p10, 0, r0, c\dr, c0, 0	@ fmsr	r0, s0
 	mov	pc, lr
-	mcr	p10, 0, r0, c\dr, c0, 4	@ fmsr	r0, s1
+	.org	1b + 8
+1:	mcr	p10, 0, r0, c\dr, c0, 4	@ fmsr	r0, s1
 	mov	pc, lr
+	.org	1b + 8
 	.endr
 ENDPROC(vfp_put_float)
 
 ENTRY(vfp_get_double)
-	add	pc, pc, r0, lsl #3
-	mov	r0, r0
+	tbl_branch r0, r3, #3
 	.irp	dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
-	fmrrd	r0, r1, d\dr
+1:	fmrrd	r0, r1, d\dr
 	mov	pc, lr
+	.org	1b + 8
 	.endr
 #ifdef CONFIG_VFPv3
 	@ d16 - d31 registers
 	.irp	dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
-	mrrc	p11, 3, r0, r1, c\dr	@ fmrrd	r0, r1, d\dr
+1:	mrrc	p11, 3, r0, r1, c\dr	@ fmrrd	r0, r1, d\dr
 	mov	pc, lr
+	.org	1b + 8
 	.endr
 #endif
 
@@ -253,17 +268,18 @@ ENTRY(vfp_get_double)
 ENDPROC(vfp_get_double)
 
 ENTRY(vfp_put_double)
-	add	pc, pc, r2, lsl #3
-	mov	r0, r0
+	tbl_branch r2, r3, #3
 	.irp	dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
-	fmdrr	d\dr, r0, r1
+1:	fmdrr	d\dr, r0, r1
 	mov	pc, lr
+	.org	1b + 8
 	.endr
 #ifdef CONFIG_VFPv3
 	@ d16 - d31 registers
 	.irp	dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
-	mcrr	p11, 3, r1, r2, c\dr	@ fmdrr	r1, r2, d\dr
+1:	mcrr	p11, 3, r1, r2, c\dr	@ fmdrr	r1, r2, d\dr
 	mov	pc, lr
+	.org	1b + 8
 	.endr
 #endif
 ENDPROC(vfp_put_double)
-- 
cgit v1.2.3


From 0e056f20f18d0efa5da920f3cf8532adc56d5779 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:32:58 +0100
Subject: Thumb-2: Implement the unified boot code

This patch adds the ARM/Thumb-2 unified support for the
arch/arm/boot/* files.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/boot/compressed/head.S | 167 ++++++++++++++++++++++++----------------
 1 file changed, 99 insertions(+), 68 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 82f5fcfd956..bd60e836987 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -140,7 +140,8 @@ start:
 		tst	r2, #3			@ not user?
 		bne	not_angel
 		mov	r0, #0x17		@ angel_SWIreason_EnterSVC
-		swi	0x123456		@ angel_SWI_ARM
+ ARM(		swi	0x123456	)	@ angel_SWI_ARM
+ THUMB(		svc	0xab		)	@ angel_SWI_THUMB
 not_angel:
 		mrs	r2, cpsr		@ turn off interrupts to
 		orr	r2, r2, #0xc0		@ prevent angel from running
@@ -161,7 +162,9 @@ not_angel:
 
 		.text
 		adr	r0, LC0
-		ldmia	r0, {r1, r2, r3, r4, r5, r6, ip, sp}
+ ARM(		ldmia	r0, {r1, r2, r3, r4, r5, r6, ip, sp}	)
+ THUMB(		ldmia	r0, {r1, r2, r3, r4, r5, r6, ip}	)
+ THUMB(		ldr	sp, [r0, #28]				)
 		subs	r0, r0, r1		@ calculate the delta offset
 
 						@ if delta is zero, we are
@@ -263,22 +266,25 @@ not_relocated:	mov	r0, #0
  * r6     = processor ID
  * r7     = architecture ID
  * r8     = atags pointer
- * r9-r14 = corrupted
+ * r9-r12,r14 = corrupted
  */
 		add	r1, r5, r0		@ end of decompressed kernel
 		adr	r2, reloc_start
 		ldr	r3, LC1
 		add	r3, r2, r3
-1:		ldmia	r2!, {r9 - r14}		@ copy relocation code
-		stmia	r1!, {r9 - r14}
-		ldmia	r2!, {r9 - r14}
-		stmia	r1!, {r9 - r14}
+1:		ldmia	r2!, {r9 - r12, r14}	@ copy relocation code
+		stmia	r1!, {r9 - r12, r14}
+		ldmia	r2!, {r9 - r12, r14}
+		stmia	r1!, {r9 - r12, r14}
 		cmp	r2, r3
 		blo	1b
-		add	sp, r1, #128		@ relocate the stack
+		mov	sp, r1
+		add	sp, sp, #128		@ relocate the stack
 
 		bl	cache_clean_flush
-		add	pc, r5, r0		@ call relocation code
+ ARM(		add	pc, r5, r0		) @ call relocation code
+ THUMB(		add	r12, r5, r0		)
+ THUMB(		mov	pc, r12			) @ call relocation code
 
 /*
  * We're not in danger of overwriting ourselves.  Do this the simple way.
@@ -499,6 +505,7 @@ __arm6_mmu_cache_on:
 		mov	pc, r12
 
 __common_mmu_cache_on:
+#ifndef CONFIG_THUMB2_KERNEL
 #ifndef DEBUG
 		orr	r0, r0, #0x000d		@ Write buffer, mmu
 #endif
@@ -510,6 +517,7 @@ __common_mmu_cache_on:
 1:		mcr	p15, 0, r0, c1, c0, 0	@ load control register
 		mrc	p15, 0, r0, c1, c0, 0	@ and read it back to
 		sub	pc, lr, r0, lsr #32	@ properly flush pipeline
+#endif
 
 /*
  * All code following this line is relocatable.  It is relocated by
@@ -523,7 +531,7 @@ __common_mmu_cache_on:
  * r6     = processor ID
  * r7     = architecture ID
  * r8     = atags pointer
- * r9-r14 = corrupted
+ * r9-r12,r14 = corrupted
  */
 		.align	5
 reloc_start:	add	r9, r5, r0
@@ -532,13 +540,14 @@ reloc_start:	add	r9, r5, r0
 		mov	r1, r4
 1:
 		.rept	4
-		ldmia	r5!, {r0, r2, r3, r10 - r14}	@ relocate kernel
-		stmia	r1!, {r0, r2, r3, r10 - r14}
+		ldmia	r5!, {r0, r2, r3, r10 - r12, r14}	@ relocate kernel
+		stmia	r1!, {r0, r2, r3, r10 - r12, r14}
 		.endr
 
 		cmp	r5, r9
 		blo	1b
-		add	sp, r1, #128		@ relocate the stack
+		mov	sp, r1
+		add	sp, sp, #128		@ relocate the stack
 		debug_reloc_end
 
 call_kernel:	bl	cache_clean_flush
@@ -572,7 +581,9 @@ call_cache_fn:	adr	r12, proc_types
 		ldr	r2, [r12, #4]		@ get mask
 		eor	r1, r1, r6		@ (real ^ match)
 		tst	r1, r2			@       & mask
-		addeq	pc, r12, r3		@ call cache function
+ ARM(		addeq	pc, r12, r3		) @ call cache function
+ THUMB(		addeq	r12, r3			)
+ THUMB(		moveq	pc, r12			) @ call cache function
 		add	r12, r12, #4*5
 		b	1b
 
@@ -595,9 +606,10 @@ call_cache_fn:	adr	r12, proc_types
 proc_types:
 		.word	0x41560600		@ ARM6/610
 		.word	0xffffffe0
-		b	__arm6_mmu_cache_off	@ works, but slow
-		b	__arm6_mmu_cache_off
+		W(b)	__arm6_mmu_cache_off	@ works, but slow
+		W(b)	__arm6_mmu_cache_off
 		mov	pc, lr
+ THUMB(		nop				)
 @		b	__arm6_mmu_cache_on		@ untested
 @		b	__arm6_mmu_cache_off
 @		b	__armv3_mmu_cache_flush
@@ -605,76 +617,84 @@ proc_types:
 		.word	0x00000000		@ old ARM ID
 		.word	0x0000f000
 		mov	pc, lr
+ THUMB(		nop				)
 		mov	pc, lr
+ THUMB(		nop				)
 		mov	pc, lr
+ THUMB(		nop				)
 
 		.word	0x41007000		@ ARM7/710
 		.word	0xfff8fe00
-		b	__arm7_mmu_cache_off
-		b	__arm7_mmu_cache_off
+		W(b)	__arm7_mmu_cache_off
+		W(b)	__arm7_mmu_cache_off
 		mov	pc, lr
+ THUMB(		nop				)
 
 		.word	0x41807200		@ ARM720T (writethrough)
 		.word	0xffffff00
-		b	__armv4_mmu_cache_on
-		b	__armv4_mmu_cache_off
+		W(b)	__armv4_mmu_cache_on
+		W(b)	__armv4_mmu_cache_off
 		mov	pc, lr
+ THUMB(		nop				)
 
 		.word	0x41007400		@ ARM74x
 		.word	0xff00ff00
-		b	__armv3_mpu_cache_on
-		b	__armv3_mpu_cache_off
-		b	__armv3_mpu_cache_flush
+		W(b)	__armv3_mpu_cache_on
+		W(b)	__armv3_mpu_cache_off
+		W(b)	__armv3_mpu_cache_flush
 		
 		.word	0x41009400		@ ARM94x
 		.word	0xff00ff00
-		b	__armv4_mpu_cache_on
-		b	__armv4_mpu_cache_off
-		b	__armv4_mpu_cache_flush
+		W(b)	__armv4_mpu_cache_on
+		W(b)	__armv4_mpu_cache_off
+		W(b)	__armv4_mpu_cache_flush
 
 		.word	0x00007000		@ ARM7 IDs
 		.word	0x0000f000
 		mov	pc, lr
+ THUMB(		nop				)
 		mov	pc, lr
+ THUMB(		nop				)
 		mov	pc, lr
+ THUMB(		nop				)
 
 		@ Everything from here on will be the new ID system.
 
 		.word	0x4401a100		@ sa110 / sa1100
 		.word	0xffffffe0
-		b	__armv4_mmu_cache_on
-		b	__armv4_mmu_cache_off
-		b	__armv4_mmu_cache_flush
+		W(b)	__armv4_mmu_cache_on
+		W(b)	__armv4_mmu_cache_off
+		W(b)	__armv4_mmu_cache_flush
 
 		.word	0x6901b110		@ sa1110
 		.word	0xfffffff0
-		b	__armv4_mmu_cache_on
-		b	__armv4_mmu_cache_off
-		b	__armv4_mmu_cache_flush
+		W(b)	__armv4_mmu_cache_on
+		W(b)	__armv4_mmu_cache_off
+		W(b)	__armv4_mmu_cache_flush
 
 		.word	0x56056930
 		.word	0xff0ffff0		@ PXA935
-		b	__armv4_mmu_cache_on
-		b	__armv4_mmu_cache_off
-		b	__armv4_mmu_cache_flush
+		W(b)	__armv4_mmu_cache_on
+		W(b)	__armv4_mmu_cache_off
+		W(b)	__armv4_mmu_cache_flush
 
 		.word	0x56158000		@ PXA168
 		.word	0xfffff000
-		b __armv4_mmu_cache_on
-		b __armv4_mmu_cache_off
-		b __armv5tej_mmu_cache_flush
+		W(b)	__armv4_mmu_cache_on
+		W(b)	__armv4_mmu_cache_off
+		W(b)	__armv5tej_mmu_cache_flush
 
 		.word	0x56056930
 		.word	0xff0ffff0		@ PXA935
-		b	__armv4_mmu_cache_on
-		b	__armv4_mmu_cache_off
-		b	__armv4_mmu_cache_flush
+		W(b)	__armv4_mmu_cache_on
+		W(b)	__armv4_mmu_cache_off
+		W(b)	__armv4_mmu_cache_flush
 
 		.word	0x56050000		@ Feroceon
 		.word	0xff0f0000
-		b	__armv4_mmu_cache_on
-		b	__armv4_mmu_cache_off
-		b	__armv5tej_mmu_cache_flush
+		W(b)	__armv4_mmu_cache_on
+		W(b)	__armv4_mmu_cache_off
+		W(b)	__armv5tej_mmu_cache_flush
 
 #ifdef CONFIG_CPU_FEROCEON_OLD_ID
 		/* this conflicts with the standard ARMv5TE entry */
@@ -687,47 +707,50 @@ proc_types:
 
 		.word	0x66015261		@ FA526
 		.word	0xff01fff1
-		b	__fa526_cache_on
-		b	__armv4_mmu_cache_off
-		b	__fa526_cache_flush
+		W(b)	__fa526_cache_on
+		W(b)	__armv4_mmu_cache_off
+		W(b)	__fa526_cache_flush
 
 		@ These match on the architecture ID
 
 		.word	0x00020000		@ ARMv4T
 		.word	0x000f0000
-		b	__armv4_mmu_cache_on
-		b	__armv4_mmu_cache_off
-		b	__armv4_mmu_cache_flush
+		W(b)	__armv4_mmu_cache_on
+		W(b)	__armv4_mmu_cache_off
+		W(b)	__armv4_mmu_cache_flush
 
 		.word	0x00050000		@ ARMv5TE
 		.word	0x000f0000
-		b	__armv4_mmu_cache_on
-		b	__armv4_mmu_cache_off
-		b	__armv4_mmu_cache_flush
+		W(b)	__armv4_mmu_cache_on
+		W(b)	__armv4_mmu_cache_off
+		W(b)	__armv4_mmu_cache_flush
 
 		.word	0x00060000		@ ARMv5TEJ
 		.word	0x000f0000
-		b	__armv4_mmu_cache_on
-		b	__armv4_mmu_cache_off
-		b	__armv5tej_mmu_cache_flush
+		W(b)	__armv4_mmu_cache_on
+		W(b)	__armv4_mmu_cache_off
+		W(b)	__armv4_mmu_cache_flush
 
 		.word	0x0007b000		@ ARMv6
 		.word	0x000ff000
-		b	__armv4_mmu_cache_on
-		b	__armv4_mmu_cache_off
-		b	__armv6_mmu_cache_flush
+		W(b)	__armv4_mmu_cache_on
+		W(b)	__armv4_mmu_cache_off
+		W(b)	__armv6_mmu_cache_flush
 
 		.word	0x000f0000		@ new CPU Id
 		.word	0x000f0000
-		b	__armv7_mmu_cache_on
-		b	__armv7_mmu_cache_off
-		b	__armv7_mmu_cache_flush
+		W(b)	__armv7_mmu_cache_on
+		W(b)	__armv7_mmu_cache_off
+		W(b)	__armv7_mmu_cache_flush
 
 		.word	0			@ unrecognised type
 		.word	0
 		mov	pc, lr
+ THUMB(		nop				)
 		mov	pc, lr
+ THUMB(		nop				)
 		mov	pc, lr
+ THUMB(		nop				)
 
 		.size	proc_types, . - proc_types
 
@@ -854,7 +877,7 @@ __armv7_mmu_cache_flush:
 		b	iflush
 hierarchical:
 		mcr	p15, 0, r10, c7, c10, 5	@ DMB
-		stmfd	sp!, {r0-r5, r7, r9, r11}
+		stmfd	sp!, {r0-r7, r9-r11}
 		mrc	p15, 1, r0, c0, c0, 1	@ read clidr
 		ands	r3, r0, #0x7000000	@ extract loc from clidr
 		mov	r3, r3, lsr #23		@ left align loc bit field
@@ -879,8 +902,12 @@ loop1:
 loop2:
 		mov	r9, r4			@ create working copy of max way size
 loop3:
-		orr	r11, r10, r9, lsl r5	@ factor way and cache number into r11
-		orr	r11, r11, r7, lsl r2	@ factor index number into r11
+ ARM(		orr	r11, r10, r9, lsl r5	) @ factor way and cache number into r11
+ ARM(		orr	r11, r11, r7, lsl r2	) @ factor index number into r11
+ THUMB(		lsl	r6, r9, r5		)
+ THUMB(		orr	r11, r10, r6		) @ factor way and cache number into r11
+ THUMB(		lsl	r6, r7, r2		)
+ THUMB(		orr	r11, r11, r6		) @ factor index number into r11
 		mcr	p15, 0, r11, c7, c14, 2	@ clean & invalidate by set/way
 		subs	r9, r9, #1		@ decrement the way
 		bge	loop3
@@ -891,7 +918,7 @@ skip:
 		cmp	r3, r10
 		bgt	loop1
 finished:
-		ldmfd	sp!, {r0-r5, r7, r9, r11}
+		ldmfd	sp!, {r0-r7, r9-r11}
 		mov	r10, #0			@ swith back to cache level 0
 		mcr	p15, 2, r10, c0, c0, 0	@ select current cache level in cssr
 iflush:
@@ -925,9 +952,13 @@ __armv4_mmu_cache_flush:
 		mov	r11, #8
 		mov	r11, r11, lsl r3	@ cache line size in bytes
 no_cache_id:
-		bic	r1, pc, #63		@ align to longest cache line
+		mov	r1, pc
+		bic	r1, r1, #63		@ align to longest cache line
 		add	r2, r1, r2
-1:		ldr	r3, [r1], r11		@ s/w flush D cache
+1:
+ ARM(		ldr	r3, [r1], r11		) @ s/w flush D cache
+ THUMB(		ldr     r3, [r1]		) @ s/w flush D cache
+ THUMB(		add     r1, r1, r11		)
 		teq	r1, r2
 		bne	1b
 
-- 
cgit v1.2.3


From adca6dc23bc620ea95392659625200a252b97be3 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:32:59 +0100
Subject: Thumb-2: Add support for loadable modules

Modules compiled to Thumb-2 have two additional relocations needing to
be resolved at load time, R_ARM_THM_CALL and R_ARM_THM_JUMP24, for BL
and B.W instructions. The maximum Thumb-2 addressing range is +/-2^24
(+/-16MB) therefore the MODULES_VADDR macro in asm/memory.h is set to
(MODULES_END - 8MB) for the Thumb-2 compiled kernel.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/include/asm/elf.h    |  3 +++
 arch/arm/include/asm/memory.h |  6 +++++
 arch/arm/kernel/module.c      | 53 +++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 62 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h
index c207504de84..c3b911ee915 100644
--- a/arch/arm/include/asm/elf.h
+++ b/arch/arm/include/asm/elf.h
@@ -55,6 +55,9 @@ typedef struct user_fp elf_fpregset_t;
 #define R_ARM_MOVW_ABS_NC	43
 #define R_ARM_MOVT_ABS		44
 
+#define R_ARM_THM_CALL		10
+#define R_ARM_THM_JUMP24	30
+
 /*
  * These are used to set parameters in the core dumps.
  */
diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h
index 85763db8744..376be1a6286 100644
--- a/arch/arm/include/asm/memory.h
+++ b/arch/arm/include/asm/memory.h
@@ -44,7 +44,13 @@
  * The module space lives between the addresses given by TASK_SIZE
  * and PAGE_OFFSET - it must be within 32MB of the kernel text.
  */
+#ifndef CONFIG_THUMB2_KERNEL
 #define MODULES_VADDR		(PAGE_OFFSET - 16*1024*1024)
+#else
+/* smaller range for Thumb-2 symbols relocation (2^24)*/
+#define MODULES_VADDR		(PAGE_OFFSET - 8*1024*1024)
+#endif
+
 #if TASK_SIZE > MODULES_VADDR
 #error Top of user space clashes with start of module space
 #endif
diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c
index bac03c81489..f28c5e9c51e 100644
--- a/arch/arm/kernel/module.c
+++ b/arch/arm/kernel/module.c
@@ -102,6 +102,7 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
 		unsigned long loc;
 		Elf32_Sym *sym;
 		s32 offset;
+		u32 upper, lower, sign, j1, j2;
 
 		offset = ELF32_R_SYM(rel->r_info);
 		if (offset < 0 || offset > (symsec->sh_size / sizeof(Elf32_Sym))) {
@@ -184,6 +185,58 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
 					(offset & 0x0fff);
 			break;
 
+		case R_ARM_THM_CALL:
+		case R_ARM_THM_JUMP24:
+			upper = *(u16 *)loc;
+			lower = *(u16 *)(loc + 2);
+
+			/*
+			 * 25 bit signed address range (Thumb-2 BL and B.W
+			 * instructions):
+			 *   S:I1:I2:imm10:imm11:0
+			 * where:
+			 *   S     = upper[10]   = offset[24]
+			 *   I1    = ~(J1 ^ S)   = offset[23]
+			 *   I2    = ~(J2 ^ S)   = offset[22]
+			 *   imm10 = upper[9:0]  = offset[21:12]
+			 *   imm11 = lower[10:0] = offset[11:1]
+			 *   J1    = lower[13]
+			 *   J2    = lower[11]
+			 */
+			sign = (upper >> 10) & 1;
+			j1 = (lower >> 13) & 1;
+			j2 = (lower >> 11) & 1;
+			offset = (sign << 24) | ((~(j1 ^ sign) & 1) << 23) |
+				((~(j2 ^ sign) & 1) << 22) |
+				((upper & 0x03ff) << 12) |
+				((lower & 0x07ff) << 1);
+			if (offset & 0x01000000)
+				offset -= 0x02000000;
+			offset += sym->st_value - loc;
+
+			/* only Thumb addresses allowed (no interworking) */
+			if (!(offset & 1) ||
+			    offset <= (s32)0xff000000 ||
+			    offset >= (s32)0x01000000) {
+				printk(KERN_ERR
+				       "%s: relocation out of range, section "
+				       "%d reloc %d sym '%s'\n", module->name,
+				       relindex, i, strtab + sym->st_name);
+				return -ENOEXEC;
+			}
+
+			sign = (offset >> 24) & 1;
+			j1 = sign ^ (~(offset >> 23) & 1);
+			j2 = sign ^ (~(offset >> 22) & 1);
+			*(u16 *)loc = (u16)((upper & 0xf800) | (sign << 10) |
+					    ((offset >> 12) & 0x03ff));
+			*(u16 *)(loc + 2) = (u16)((lower & 0xd000) |
+						  (j1 << 13) | (j2 << 11) |
+						  ((offset >> 1) & 0x07ff));
+			upper = *(u16 *)loc;
+			lower = *(u16 *)(loc + 2);
+			break;
+
 		default:
 			printk(KERN_ERR "%s: unknown relocation: %u\n",
 			       module->name, ELF32_R_TYPE(rel->r_info));
-- 
cgit v1.2.3


From dff2ab16ac53d2e21c1ee5ec72f446d5740d8ca2 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:33:00 +0100
Subject: Thumb-2: Pass a Thumb-2 address to the secondary CPUs to jump to

This patch sets bit 0 in the startup address passed to the secondary
CPUs so that they branch into Thumb-2 mode.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/mach-realview/platsmp.c | 18 ++++++------------
 1 file changed, 6 insertions(+), 12 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c
index ac0e83f1cc3..a88458b4799 100644
--- a/arch/arm/mach-realview/platsmp.c
+++ b/arch/arm/mach-realview/platsmp.c
@@ -20,6 +20,7 @@
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/localtimer.h>
+#include <asm/unified.h>
 
 #include <mach/board-eb.h>
 #include <mach/board-pb11mp.h>
@@ -137,26 +138,19 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
 
 static void __init poke_milo(void)
 {
-	extern void secondary_startup(void);
-
 	/* nobody is to be released from the pen yet */
 	pen_release = -1;
 
 	/*
-	 * write the address of secondary startup into the system-wide
-	 * flags register, then clear the bottom two bits, which is what
-	 * BootMonitor is waiting for
+	 * Write the address of secondary startup into the system-wide flags
+	 * register. The BootMonitor waits for this register to become
+	 * non-zero.
 	 */
-#if 1
 #define REALVIEW_SYS_FLAGSS_OFFSET 0x30
-	__raw_writel(virt_to_phys(realview_secondary_startup),
-		     __io_address(REALVIEW_SYS_BASE) +
-		     REALVIEW_SYS_FLAGSS_OFFSET);
 #define REALVIEW_SYS_FLAGSC_OFFSET 0x34
-	__raw_writel(3,
+	__raw_writel(BSYM(virt_to_phys(realview_secondary_startup)),
 		     __io_address(REALVIEW_SYS_BASE) +
-		     REALVIEW_SYS_FLAGSC_OFFSET);
-#endif
+		     REALVIEW_SYS_FLAGSS_OFFSET);
 
 	mb();
 }
-- 
cgit v1.2.3


From e2ed3be7319f2734fcd9c7638888501934c22751 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:33:01 +0100
Subject: Thumb-2: Make the uImage entry an odd number

This allows U-Boot to branch to the kernel in Thumb-2 mode via
"mov pc, lr".

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/boot/Makefile | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile
index da226abce2d..4a590f4113e 100644
--- a/arch/arm/boot/Makefile
+++ b/arch/arm/boot/Makefile
@@ -61,7 +61,7 @@ endif
 
 quiet_cmd_uimage = UIMAGE  $@
       cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A arm -O linux -T kernel \
-		   -C none -a $(LOADADDR) -e $(LOADADDR) \
+		   -C none -a $(LOADADDR) -e $(STARTADDR) \
 		   -n 'Linux-$(KERNELRELEASE)' -d $< $@
 
 ifeq ($(CONFIG_ZBOOT_ROM),y)
@@ -70,6 +70,13 @@ else
 $(obj)/uImage: LOADADDR=$(ZRELADDR)
 endif
 
+ifeq ($(CONFIG_THUMB2_KERNEL),y)
+# Set bit 0 to 1 so that "mov pc, rx" switches to Thumb-2 mode
+$(obj)/uImage: STARTADDR=$(shell echo $(LOADADDR) | sed -e "s/.$$/1/")
+else
+$(obj)/uImage: STARTADDR=$(LOADADDR)
+endif
+
 $(obj)/uImage:	$(obj)/zImage FORCE
 	$(call if_changed,uimage)
 	@echo '  Image $@ is ready'
-- 
cgit v1.2.3


From 16c79651a5ee1ad7e4fca65a7c5309dfca89ed28 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:33:02 +0100
Subject: Thumb-2: Add Thumb-2 support to the build files

This patch adds the necessary entries to the Makefile and Kconfig
files for building the Thumb-2 kernel.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/Kconfig       | 12 ++++++++++++
 arch/arm/Kconfig.debug |  1 +
 arch/arm/Makefile      | 11 +++++++++--
 3 files changed, 22 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index da28e7ba608..a36b5a8b123 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -983,6 +983,18 @@ config HZ
 	default AT91_TIMER_HZ if ARCH_AT91
 	default 100
 
+config THUMB2_KERNEL
+	bool "Compile the kernel in Thumb-2 mode"
+	depends on CPU_V7 && EXPERIMENTAL
+	select AEABI
+	select ARM_ASM_UNIFIED
+	help
+	  By enabling this option, the kernel will be compiled in
+	  Thumb-2 mode. A compiler/assembler that understand the unified
+	  ARM-Thumb syntax is needed.
+
+	  If unsure, say N.
+
 config ARM_ASM_UNIFIED
 	bool
 
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index a89e4734b8f..1a6f70e5292 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -8,6 +8,7 @@ source "lib/Kconfig.debug"
 # n, but then RMK will have to kill you ;).
 config FRAME_POINTER
 	bool
+	depends on !THUMB2_KERNEL
 	default y if !ARM_UNWIND
 	help
 	  If you say N here, the resulting kernel will be slightly smaller and
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 3505572a21e..e150f232458 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -93,9 +93,16 @@ ifeq ($(CONFIG_ARM_UNWIND),y)
 CFLAGS_ABI	+=-funwind-tables
 endif
 
+ifeq ($(CONFIG_THUMB2_KERNEL),y)
+AFLAGS_AUTOIT	:=$(call as-option,-Wa$(comma)-mimplicit-it=thumb,-Wa$(comma)-mauto-it)
+AFLAGS_NOWARN	:=$(call as-option,-Wa$(comma)-mno-warn-deprecated,-Wa$(comma)-W)
+CFLAGS_THUMB2	:=-mthumb $(AFLAGS_AUTOIT) $(AFLAGS_NOWARN)
+AFLAGS_THUMB2	:=$(CFLAGS_THUMB2) -Wa$(comma)-mthumb
+endif
+
 # Need -Uarm for gcc < 3.x
-KBUILD_CFLAGS	+=$(CFLAGS_ABI) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm
-KBUILD_AFLAGS	+=$(CFLAGS_ABI) $(arch-y) $(tune-y) -include asm/unified.h -msoft-float
+KBUILD_CFLAGS	+=$(CFLAGS_ABI) $(CFLAGS_THUMB2) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm
+KBUILD_AFLAGS	+=$(CFLAGS_ABI) $(AFLAGS_THUMB2) $(arch-y) $(tune-y) -include asm/unified.h -msoft-float
 
 CHECKFLAGS	+= -D__arm__
 
-- 
cgit v1.2.3


From 09529f7a1a010cc364267fc5895a71c3853eb82c Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:34:55 +0100
Subject: nommu: Fix the fault processing for the MMU-less case

The patch adds the necessary ifdefs around functions that only make
sense when the MMU is enabled.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/mm/fault.c | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index 6fdcbb70982..ee01ccae3f5 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -23,6 +23,7 @@
 
 #include "fault.h"
 
+#ifdef CONFIG_MMU
 
 #ifdef CONFIG_KPROBES
 static inline int notify_page_fault(struct pt_regs *regs, unsigned int fsr)
@@ -97,6 +98,10 @@ void show_pte(struct mm_struct *mm, unsigned long addr)
 
 	printk("\n");
 }
+#else					/* CONFIG_MMU */
+void show_pte(struct mm_struct *mm, unsigned long addr)
+{ }
+#endif					/* CONFIG_MMU */
 
 /*
  * Oops.  The kernel tried to access some page that wasn't present.
@@ -171,6 +176,7 @@ void do_bad_area(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 		__do_kernel_fault(mm, addr, fsr, regs);
 }
 
+#ifdef CONFIG_MMU
 #define VM_FAULT_BADMAP		0x010000
 #define VM_FAULT_BADACCESS	0x020000
 
@@ -322,6 +328,13 @@ no_context:
 	__do_kernel_fault(mm, addr, fsr, regs);
 	return 0;
 }
+#else					/* CONFIG_MMU */
+static int
+do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
+{
+	return 0;
+}
+#endif					/* CONFIG_MMU */
 
 /*
  * First Level Translation Fault Handler
@@ -340,6 +353,7 @@ no_context:
  * interrupt or a critical region, and should only copy the information
  * from the master page table, nothing more.
  */
+#ifdef CONFIG_MMU
 static int __kprobes
 do_translation_fault(unsigned long addr, unsigned int fsr,
 		     struct pt_regs *regs)
@@ -378,6 +392,14 @@ bad_area:
 	do_bad_area(addr, fsr, regs);
 	return 0;
 }
+#else					/* CONFIG_MMU */
+static int
+do_translation_fault(unsigned long addr, unsigned int fsr,
+		     struct pt_regs *regs)
+{
+	return 0;
+}
+#endif					/* CONFIG_MMU */
 
 /*
  * Some section permission faults need to be handled gracefully.
-- 
cgit v1.2.3


From 9a45f026bb3ba720765d46f62f5c464d3317a8ab Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:34:56 +0100
Subject: nommu: Remove the context.id from asm-offsets.c when !MMU

There is no MMU context switching on MMU-less systems.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/include/asm/mmu_context.h | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/include/asm/mmu_context.h b/arch/arm/include/asm/mmu_context.h
index 263fed05ea3..bcdb9291ef0 100644
--- a/arch/arm/include/asm/mmu_context.h
+++ b/arch/arm/include/asm/mmu_context.h
@@ -62,8 +62,10 @@ static inline void check_context(struct mm_struct *mm)
 
 static inline void check_context(struct mm_struct *mm)
 {
+#ifdef CONFIG_MMU
 	if (unlikely(mm->context.kvm_seq != init_mm.context.kvm_seq))
 		__check_kvm_seq(mm);
+#endif
 }
 
 #define init_new_context(tsk,mm)	0
-- 
cgit v1.2.3


From 365f7a43497dfdfdc05ca03896a8e22ee6944179 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:34:57 +0100
Subject: nommu: Add MMU-less support for Integrator platforms

This patch redefines the IO_ADDRESS macro in
include/asm-arm/hardware.h.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/mach-integrator/include/mach/hardware.h |  4 ++++
 arch/arm/mach-integrator/integrator_cp.c         | 16 ++++++++--------
 2 files changed, 12 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-integrator/include/mach/hardware.h b/arch/arm/mach-integrator/include/mach/hardware.h
index 1251319ef9a..d795642fad2 100644
--- a/arch/arm/mach-integrator/include/mach/hardware.h
+++ b/arch/arm/mach-integrator/include/mach/hardware.h
@@ -36,8 +36,12 @@
 #define PCIO_BASE		PCI_IO_VADDR
 #define PCIMEM_BASE		PCI_MEMORY_VADDR
 
+#ifdef CONFIG_MMU
 /* macro to get at IO space when running virtually */
 #define IO_ADDRESS(x) (((x) >> 4) + IO_BASE) 
+#else
+#define IO_ADDRESS(x) (x)
+#endif
 
 #define pcibios_assign_all_busses()	1
 
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index 4ac04055c2e..452931b2690 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -49,14 +49,14 @@
 
 #define INTCP_PA_CLCD_BASE		0xc0000000
 
-#define INTCP_VA_CIC_BASE		0xf1000040
-#define INTCP_VA_PIC_BASE		0xf1400000
-#define INTCP_VA_SIC_BASE		0xfca00000
+#define INTCP_VA_CIC_BASE		IO_ADDRESS(INTEGRATOR_HDR_BASE) + 0x40
+#define INTCP_VA_PIC_BASE		IO_ADDRESS(INTEGRATOR_IC_BASE)
+#define INTCP_VA_SIC_BASE		IO_ADDRESS(0xca000000)
 
 #define INTCP_PA_ETH_BASE		0xc8000000
 #define INTCP_ETH_SIZE			0x10
 
-#define INTCP_VA_CTRL_BASE		0xfcb00000
+#define INTCP_VA_CTRL_BASE		IO_ADDRESS(0xcb000000)
 #define INTCP_FLASHPROG			0x04
 #define CINTEGRATOR_FLASHPROG_FLVPPEN	(1 << 0)
 #define CINTEGRATOR_FLASHPROG_FLWREN	(1 << 1)
@@ -121,12 +121,12 @@ static struct map_desc intcp_io_desc[] __initdata = {
 		.length		= SZ_4K,
 		.type		= MT_DEVICE
 	}, {
-		.virtual	= 0xfca00000,
+		.virtual	= IO_ADDRESS(0xca000000),
 		.pfn		= __phys_to_pfn(0xca000000),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE
 	}, {
-		.virtual	= 0xfcb00000,
+		.virtual	= IO_ADDRESS(0xcb000000),
 		.pfn		= __phys_to_pfn(0xcb000000),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE
@@ -394,8 +394,8 @@ static struct platform_device *intcp_devs[] __initdata = {
  */
 static unsigned int mmc_status(struct device *dev)
 {
-	unsigned int status = readl(0xfca00004);
-	writel(8, 0xfcb00008);
+	unsigned int status = readl(IO_ADDRESS(0xca000000) + 4);
+	writel(8, IO_ADDRESS(0xcb000000) + 8);
 
 	return status & 8;
 }
-- 
cgit v1.2.3


From 5d57795e26c413656725c26bd053dbee3711adee Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:34:57 +0100
Subject: nommu: Add MMU-less support for the RealView boards

This patch defines the IO_ADDRESS macro for the !CONFIG_MMU case.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/mach-realview/include/mach/hardware.h | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-realview/include/mach/hardware.h b/arch/arm/mach-realview/include/mach/hardware.h
index b42c14f89ac..8a638d15797 100644
--- a/arch/arm/mach-realview/include/mach/hardware.h
+++ b/arch/arm/mach-realview/include/mach/hardware.h
@@ -25,6 +25,7 @@
 #include <asm/sizes.h>
 
 /* macro to get at IO space when running virtually */
+#ifdef CONFIG_MMU
 /*
  * Statically mapped addresses:
  *
@@ -33,6 +34,9 @@
  * 1fxx xxxx -> fexx xxxx
  */
 #define IO_ADDRESS(x)		(((x) & 0x03ffffff) + 0xfb000000)
+#else
+#define IO_ADDRESS(x)		(x)
+#endif
 #define __io_address(n)		__io(IO_ADDRESS(n))
 
 #endif
-- 
cgit v1.2.3


From 68b7f7153fa58df710924fbb79722717d2d16094 Mon Sep 17 00:00:00 2001
From: Paul Brook <paul@codesourcery.com>
Date: Fri, 24 Jul 2009 12:34:58 +0100
Subject: nommu: ptrace support

The patch below adds ARM ptrace functions to get the process load address.
This is required for useful userspace debugging on mmuless systems.  These
values are obtained by reading magic offsets with PTRACE_PEEKUSR, as on other
nommu targets. I picked arbitrary large values for the offsets.

Signed-off-by: Paul Brook <paul@codesourcery.com>
---
 arch/arm/include/asm/ptrace.h | 8 ++++++++
 arch/arm/kernel/ptrace.c      | 8 +++++++-
 2 files changed, 15 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/include/asm/ptrace.h b/arch/arm/include/asm/ptrace.h
index 67b833c9b6b..bbecccda76d 100644
--- a/arch/arm/include/asm/ptrace.h
+++ b/arch/arm/include/asm/ptrace.h
@@ -82,6 +82,14 @@
 #define PSR_ENDSTATE	0
 #endif
 
+/* 
+ * These are 'magic' values for PTRACE_PEEKUSR that return info about where a
+ * process is located in memory.
+ */
+#define PT_TEXT_ADDR		0x10000
+#define PT_DATA_ADDR		0x10004
+#define PT_TEXT_END_ADDR	0x10008
+
 #ifndef __ASSEMBLY__
 
 /*
diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c
index 89882a1d018..a2ea3854cb3 100644
--- a/arch/arm/kernel/ptrace.c
+++ b/arch/arm/kernel/ptrace.c
@@ -521,7 +521,13 @@ static int ptrace_read_user(struct task_struct *tsk, unsigned long off,
 		return -EIO;
 
 	tmp = 0;
-	if (off < sizeof(struct pt_regs))
+	if (off == PT_TEXT_ADDR)
+		tmp = tsk->mm->start_code;
+	else if (off == PT_DATA_ADDR)
+		tmp = tsk->mm->start_data;
+	else if (off == PT_TEXT_END_ADDR)
+		tmp = tsk->mm->end_code;
+	else if (off < sizeof(struct pt_regs))
 		tmp = get_user_reg(tsk, off >> 2);
 
 	return put_user(tmp, ret);
-- 
cgit v1.2.3


From 05efde9d04ccc1d66a9d2225527c6ee638baa385 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:34:59 +0100
Subject: nommu: Do not override the CP15 control reg value returned from
 initfunc

The patch removes the "mrc" instruction in head-nommu.S overriding the
r0 register containing the value to be written in the CP15 system
control register.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/kernel/head-nommu.S | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S
index b16393d2b71..e5dfc2895e2 100644
--- a/arch/arm/kernel/head-nommu.S
+++ b/arch/arm/kernel/head-nommu.S
@@ -61,7 +61,10 @@ ENDPROC(stext)
  */
 __after_proc_init:
 #ifdef CONFIG_CPU_CP15
-	mrc	p15, 0, r0, c1, c0, 0		@ read control reg
+	/*
+	 * CP15 system control register value returned in r0 from
+	 * the CPU init function.
+	 */
 #ifdef CONFIG_ALIGNMENT_TRAP
 	orr	r0, r0, #CR_A
 #else
-- 
cgit v1.2.3


From 3c4279750c7d3f88a0638a44e257d7d8d10732f2 Mon Sep 17 00:00:00 2001
From: "Hyok S. Choi" <hyok.choi@samsung.com>
Date: Fri, 24 Jul 2009 12:35:00 +0100
Subject: nommu: Enables to select noMMU mode

MMU option is now selectable.

Signed-off-by: Hyok S. Choi <hyok.choi@samsung.com>
---
 arch/arm/Kconfig | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index a36b5a8b123..dc70660fe6b 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -46,10 +46,6 @@ config GENERIC_CLOCKEVENTS_BROADCAST
 	depends on GENERIC_CLOCKEVENTS
 	default y if SMP && !LOCAL_TIMERS
 
-config MMU
-	bool
-	default y
-
 config NO_IOPORT
 	bool
 
@@ -188,6 +184,13 @@ source "kernel/Kconfig.freezer"
 
 menu "System Type"
 
+config MMU
+	bool "MMU-based Paged Memory Management Support"
+	default y
+	help
+	  Select if you want MMU-based virtualised addressing space
+	  support by paged memory management. If unsure, say 'Y'.
+
 choice
 	prompt "ARM system type"
 	default ARCH_VERSATILE
-- 
cgit v1.2.3


From 2732f4b6f11689fa08e2db5689fc652d608936b5 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:35:01 +0100
Subject: nommu: Remove the memory_start/end variables from ARM page-nommu.h

These variables do not seem to be used anywhere in the kernel.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/include/asm/page-nommu.h | 3 ---
 1 file changed, 3 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/include/asm/page-nommu.h b/arch/arm/include/asm/page-nommu.h
index 3574c0deb37..d1b162a18dc 100644
--- a/arch/arm/include/asm/page-nommu.h
+++ b/arch/arm/include/asm/page-nommu.h
@@ -43,7 +43,4 @@ typedef unsigned long pgprot_t;
 #define __pmd(x)        (x)
 #define __pgprot(x)     (x)
 
-extern unsigned long memory_start;
-extern unsigned long memory_end;
-
 #endif
-- 
cgit v1.2.3


From ab6494f0c96f8953c7ad3e35301b2de2db3add57 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:35:02 +0100
Subject: nommu: Add noMMU support to the DMA API

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/mm/dma-mapping.c | 94 ++++++++++++++++++++++++++++++++++++-----------
 1 file changed, 72 insertions(+), 22 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index 510c179b0ac..b30925fcbcd 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -36,7 +36,34 @@
 #define CONSISTENT_PTE_INDEX(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PGDIR_SHIFT)
 #define NUM_CONSISTENT_PTES (CONSISTENT_DMA_SIZE >> PGDIR_SHIFT)
 
+static u64 get_coherent_dma_mask(struct device *dev)
+{
+	u64 mask = ISA_DMA_THRESHOLD;
+
+	if (dev) {
+		mask = dev->coherent_dma_mask;
+
+		/*
+		 * Sanity check the DMA mask - it must be non-zero, and
+		 * must be able to be satisfied by a DMA allocation.
+		 */
+		if (mask == 0) {
+			dev_warn(dev, "coherent DMA mask is unset\n");
+			return 0;
+		}
+
+		if ((~mask) & ISA_DMA_THRESHOLD) {
+			dev_warn(dev, "coherent DMA mask %#llx is smaller "
+				 "than system GFP_DMA mask %#llx\n",
+				 mask, (unsigned long long)ISA_DMA_THRESHOLD);
+			return 0;
+		}
+	}
 
+	return mask;
+}
+
+#ifdef CONFIG_MMU
 /*
  * These are the page tables (2MB each) covering uncached, DMA consistent allocations
  */
@@ -152,7 +179,8 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
 	struct page *page;
 	struct arm_vm_region *c;
 	unsigned long order;
-	u64 mask = ISA_DMA_THRESHOLD, limit;
+	u64 mask = get_coherent_dma_mask(dev);
+	u64 limit;
 
 	if (!consistent_pte[0]) {
 		printk(KERN_ERR "%s: not initialised\n", __func__);
@@ -160,25 +188,8 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
 		return NULL;
 	}
 
-	if (dev) {
-		mask = dev->coherent_dma_mask;
-
-		/*
-		 * Sanity check the DMA mask - it must be non-zero, and
-		 * must be able to be satisfied by a DMA allocation.
-		 */
-		if (mask == 0) {
-			dev_warn(dev, "coherent DMA mask is unset\n");
-			goto no_page;
-		}
-
-		if ((~mask) & ISA_DMA_THRESHOLD) {
-			dev_warn(dev, "coherent DMA mask %#llx is smaller "
-				 "than system GFP_DMA mask %#llx\n",
-				 mask, (unsigned long long)ISA_DMA_THRESHOLD);
-			goto no_page;
-		}
-	}
+	if (!mask)
+		goto no_page;
 
 	/*
 	 * Sanity check the allocation size.
@@ -267,6 +278,31 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
 	*handle = ~0;
 	return NULL;
 }
+#else	/* !CONFIG_MMU */
+static void *
+__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
+	    pgprot_t prot)
+{
+	void *virt;
+	u64 mask = get_coherent_dma_mask(dev);
+
+	if (!mask)
+		goto error;
+
+	if (mask != 0xffffffff)
+		gfp |= GFP_DMA;
+	virt = kmalloc(size, gfp);
+	if (!virt)
+		goto error;
+
+	*handle =  virt_to_dma(dev, virt);
+	return virt;
+
+error:
+	*handle = ~0;
+	return NULL;
+}
+#endif	/* CONFIG_MMU */
 
 /*
  * Allocate DMA-coherent memory space and return both the kernel remapped
@@ -311,9 +347,10 @@ EXPORT_SYMBOL(dma_alloc_writecombine);
 static int dma_mmap(struct device *dev, struct vm_area_struct *vma,
 		    void *cpu_addr, dma_addr_t dma_addr, size_t size)
 {
+	int ret = -ENXIO;
+#ifdef CONFIG_MMU
 	unsigned long flags, user_size, kern_size;
 	struct arm_vm_region *c;
-	int ret = -ENXIO;
 
 	user_size = (vma->vm_end - vma->vm_start) >> PAGE_SHIFT;
 
@@ -334,6 +371,7 @@ static int dma_mmap(struct device *dev, struct vm_area_struct *vma,
 					      vma->vm_page_prot);
 		}
 	}
+#endif	/* CONFIG_MMU */
 
 	return ret;
 }
@@ -358,6 +396,7 @@ EXPORT_SYMBOL(dma_mmap_writecombine);
  * free a page as defined by the above mapping.
  * Must not be called with IRQs disabled.
  */
+#ifdef CONFIG_MMU
 void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr_t handle)
 {
 	struct arm_vm_region *c;
@@ -444,6 +483,14 @@ void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr
 	       __func__, cpu_addr);
 	dump_stack();
 }
+#else	/* !CONFIG_MMU */
+void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr_t handle)
+{
+	if (dma_release_from_coherent(dev, get_order(size), cpu_addr))
+		return;
+	kfree(cpu_addr);
+}
+#endif	/* CONFIG_MMU */
 EXPORT_SYMBOL(dma_free_coherent);
 
 /*
@@ -451,10 +498,12 @@ EXPORT_SYMBOL(dma_free_coherent);
  */
 static int __init consistent_init(void)
 {
+	int ret = 0;
+#ifdef CONFIG_MMU
 	pgd_t *pgd;
 	pmd_t *pmd;
 	pte_t *pte;
-	int ret = 0, i = 0;
+	int i = 0;
 	u32 base = CONSISTENT_BASE;
 
 	do {
@@ -477,6 +526,7 @@ static int __init consistent_init(void)
 		consistent_pte[i++] = pte;
 		base += (1 << PGDIR_SHIFT);
 	} while (base < CONSISTENT_END);
+#endif	/* !CONFIG_MMU */
 
 	return ret;
 }
-- 
cgit v1.2.3


From b32f3afe3c5c4ddd1c414d41845470a99c88475f Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:35:03 +0100
Subject: nommu: Include asm/setup.h in arch/arm/mm/nommu.c

This is needed for the struct meminfo definition.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/mm/nommu.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c
index ad7bacc693b..900811cc913 100644
--- a/arch/arm/mm/nommu.c
+++ b/arch/arm/mm/nommu.c
@@ -12,6 +12,7 @@
 #include <asm/cacheflush.h>
 #include <asm/sections.h>
 #include <asm/page.h>
+#include <asm/setup.h>
 #include <asm/mach/arch.h>
 
 #include "mm.h"
-- 
cgit v1.2.3


From 8b79d5f217d7fc7d6b85ee5b10899f2bd20b64ed Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:35:04 +0100
Subject: nommu: Add #ifdef CONFIG_MMU around the PTE sanity checks

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/mm/proc-macros.S | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mm/proc-macros.S b/arch/arm/mm/proc-macros.S
index 54b1f721dec..f1559c22778 100644
--- a/arch/arm/mm/proc-macros.S
+++ b/arch/arm/mm/proc-macros.S
@@ -77,6 +77,7 @@
  * Sanity check the PTE configuration for the code below - which makes
  * certain assumptions about how these bits are layed out.
  */
+#ifdef CONFIG_MMU
 #if L_PTE_SHARED != PTE_EXT_SHARED
 #error PTE shared bit mismatch
 #endif
@@ -90,6 +91,7 @@
      L_PTE_FILE+L_PTE_PRESENT) > L_PTE_SHARED
 #error Invalid Linux PTE bit settings
 #endif
+#endif	/* CONFIG_MMU */
 
 /*
  * The ARMv6 and ARMv7 set_pte_ext translation function.
-- 
cgit v1.2.3


From 0e0fe9219d2e5426d87a0f62db445010d4aba2c7 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:35:05 +0100
Subject: nommu: Do not allow REALVIEW_HIGH_PHYS_OFFSET if !MMU

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/mach-realview/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig
index d4cfa214538..dfc9b0bc6eb 100644
--- a/arch/arm/mach-realview/Kconfig
+++ b/arch/arm/mach-realview/Kconfig
@@ -75,7 +75,7 @@ config MACH_REALVIEW_PBX
 
 config REALVIEW_HIGH_PHYS_OFFSET
 	bool "High physical base address for the RealView platform"
-	depends on !MACH_REALVIEW_PB1176
+	depends on MMU && !MACH_REALVIEW_PB1176
 	default y
 	help
 	  RealView boards other than PB1176 have the RAM available at
-- 
cgit v1.2.3


From 8bdca0ac2b1ec35091941c57b4202f7096291c5b Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:35:06 +0100
Subject: nommu: Fix compressed/head.S to not perform MMU specific operations

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/boot/compressed/head.S | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index bd60e836987..fa6fbf45cf3 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -438,6 +438,7 @@ ENDPROC(__setup_mmu)
 
 __armv4_mmu_cache_on:
 		mov	r12, lr
+#ifdef CONFIG_MMU
 		bl	__setup_mmu
 		mov	r0, #0
 		mcr	p15, 0, r0, c7, c10, 4	@ drain write buffer
@@ -451,10 +452,12 @@ __armv4_mmu_cache_on:
 		bl	__common_mmu_cache_on
 		mov	r0, #0
 		mcr	p15, 0, r0, c8, c7, 0	@ flush I,D TLBs
+#endif
 		mov	pc, r12
 
 __armv7_mmu_cache_on:
 		mov	r12, lr
+#ifdef CONFIG_MMU
 		mrc	p15, 0, r11, c0, c1, 4	@ read ID_MMFR0
 		tst	r11, #0xf		@ VMSA
 		blne	__setup_mmu
@@ -462,9 +465,11 @@ __armv7_mmu_cache_on:
 		mcr	p15, 0, r0, c7, c10, 4	@ drain write buffer
 		tst	r11, #0xf		@ VMSA
 		mcrne	p15, 0, r0, c8, c7, 0	@ flush I,D TLBs
+#endif
 		mrc	p15, 0, r0, c1, c0, 0	@ read control reg
 		orr	r0, r0, #0x5000		@ I-cache enable, RR cache replacement
 		orr	r0, r0, #0x003c		@ write buffer
+#ifdef CONFIG_MMU
 #ifdef CONFIG_CPU_ENDIAN_BE8
 		orr	r0, r0, #1 << 25	@ big-endian page tables
 #endif
@@ -472,6 +477,7 @@ __armv7_mmu_cache_on:
 		movne	r1, #-1
 		mcrne	p15, 0, r3, c2, c0, 0	@ load page table pointer
 		mcrne	p15, 0, r1, c3, c0, 0	@ load domain access control
+#endif
 		mcr	p15, 0, r0, c1, c0, 0	@ load control register
 		mrc	p15, 0, r0, c1, c0, 0	@ and read it back
 		mov	r0, #0
@@ -785,22 +791,30 @@ __armv3_mpu_cache_off:
 		mov	pc, lr
 
 __armv4_mmu_cache_off:
+#ifdef CONFIG_MMU
 		mrc	p15, 0, r0, c1, c0
 		bic	r0, r0, #0x000d
 		mcr	p15, 0, r0, c1, c0	@ turn MMU and cache off
 		mov	r0, #0
 		mcr	p15, 0, r0, c7, c7	@ invalidate whole cache v4
 		mcr	p15, 0, r0, c8, c7	@ invalidate whole TLB v4
+#endif
 		mov	pc, lr
 
 __armv7_mmu_cache_off:
 		mrc	p15, 0, r0, c1, c0
+#ifdef CONFIG_MMU
 		bic	r0, r0, #0x000d
+#else
+		bic	r0, r0, #0x000c
+#endif
 		mcr	p15, 0, r0, c1, c0	@ turn MMU and cache off
 		mov	r12, lr
 		bl	__armv7_mmu_cache_flush
 		mov	r0, #0
+#ifdef CONFIG_MMU
 		mcr	p15, 0, r0, c8, c7, 0	@ invalidate whole TLB
+#endif
 		mcr	p15, 0, r0, c7, c5, 6	@ invalidate BTC
 		mcr	p15, 0, r0, c7, c10, 4	@ DSB
 		mcr	p15, 0, r0, c7, c5, 4	@ ISB
-- 
cgit v1.2.3


From bdaaaec39792ee0035d6c5a5ad2520991e090a3c Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:35:06 +0100
Subject: nommu: Do not set PRRR and NMRR in proc-v7.S if !MMU

ARMv7-R profile CPUs do not have these registers.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/mm/proc-v7.S | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index c19aecdb202..f3fa1c32fe9 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -234,7 +234,6 @@ __v7_setup:
 	mcr	p15, 0, r4, c2, c0, 1		@ load TTB1
 	mov	r10, #0x1f			@ domains 0, 1 = manager
 	mcr	p15, 0, r10, c3, c0, 0		@ load domain access register
-#endif
 	/*
 	 * Memory region attributes with SCTLR.TRE=1
 	 *
@@ -267,6 +266,7 @@ __v7_setup:
 	ldr	r6, =0x40e040e0			@ NMRR
 	mcr	p15, 0, r5, c10, c2, 0		@ write PRRR
 	mcr	p15, 0, r6, c10, c2, 1		@ write NMRR
+#endif
 	adr	r5, v7_crval
 	ldmia	r5, {r5, r6}
 #ifdef CONFIG_CPU_ENDIAN_BE8
-- 
cgit v1.2.3


From 412bb0a6224f96661c042a109c4978649c00ed52 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Fri, 24 Jul 2009 12:37:09 +0100
Subject: Include linux/sched.h in arch/arm/mm/fault.c

When building with !MMU, task_struct is not defined. Just include the
relevant file.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
---
 arch/arm/mm/fault.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index ee01ccae3f5..556c8daf087 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -16,6 +16,7 @@
 #include <linux/kprobes.h>
 #include <linux/uaccess.h>
 #include <linux/page-flags.h>
+#include <linux/sched.h>
 
 #include <asm/system.h>
 #include <asm/pgtable.h>
-- 
cgit v1.2.3


From 4c8abb556b393b3ed73d72481ba27705294f6dc6 Mon Sep 17 00:00:00 2001
From: Nicolas Ferre <nicolas.ferre@atmel.com>
Date: Fri, 24 Jul 2009 12:16:57 +0100
Subject: ARM: 5622/1: at91: at91sam9g45 headers: DMA peripheral identifiers

It adds DMA peripheral identifiers for hardware handshaking interface. It will
be used in platform code.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/include/mach/at91sam9g45.h | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45.h b/arch/arm/mach-at91/include/mach/at91sam9g45.h
index 2c42cf5f0c5..a526869aee3 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9g45.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9g45.h
@@ -135,4 +135,21 @@
 
 #define CONSISTENT_DMA_SIZE	SZ_4M
 
+/*
+ * DMA peripheral identifiers
+ * for hardware handshaking interface
+ */
+#define AT_DMA_ID_MCI0		 0
+#define AT_DMA_ID_SPI0_TX	 1
+#define AT_DMA_ID_SPI0_RX	 2
+#define AT_DMA_ID_SPI1_TX	 3
+#define AT_DMA_ID_SPI1_RX	 4
+#define AT_DMA_ID_SSC0_TX	 5
+#define AT_DMA_ID_SSC0_RX	 6
+#define AT_DMA_ID_SSC1_TX	 7
+#define AT_DMA_ID_SSC1_RX	 8
+#define AT_DMA_ID_AC97_TX	 9
+#define AT_DMA_ID_AC97_RX	10
+#define AT_DMA_ID_MCI1		13
+
 #endif
-- 
cgit v1.2.3


From 3885123da8335dc6b67387e5e626acbffc56f664 Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Fri, 10 Jul 2009 10:04:50 +0900
Subject: swiotlb: remove unused swiotlb_alloc_boot()

Nobody uses swiotlb_alloc_boot().

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Becky Bruce <beckyb@kernel.crashing.org>
---
 arch/x86/kernel/pci-swiotlb.c | 5 -----
 1 file changed, 5 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/pci-swiotlb.c b/arch/x86/kernel/pci-swiotlb.c
index 6af96ee4420..0ac7cd52478 100644
--- a/arch/x86/kernel/pci-swiotlb.c
+++ b/arch/x86/kernel/pci-swiotlb.c
@@ -13,11 +13,6 @@
 
 int swiotlb __read_mostly;
 
-void * __init swiotlb_alloc_boot(size_t size, unsigned long nslabs)
-{
-	return alloc_bootmem_low_pages(size);
-}
-
 void *swiotlb_alloc(unsigned order, unsigned long nslabs)
 {
 	return (void *)__get_free_pages(GFP_DMA | __GFP_NOWARN, order);
-- 
cgit v1.2.3


From bb52196be37ce154ddc50b1f39496146d181cbe7 Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Fri, 10 Jul 2009 10:04:51 +0900
Subject: swiotlb: remove unused swiotlb_alloc()

Nobody uses swiotlb_alloc().

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Becky Bruce <beckyb@kernel.crashing.org>
---
 arch/x86/kernel/pci-swiotlb.c | 5 -----
 1 file changed, 5 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/pci-swiotlb.c b/arch/x86/kernel/pci-swiotlb.c
index 0ac7cd52478..ea675cfe76f 100644
--- a/arch/x86/kernel/pci-swiotlb.c
+++ b/arch/x86/kernel/pci-swiotlb.c
@@ -13,11 +13,6 @@
 
 int swiotlb __read_mostly;
 
-void *swiotlb_alloc(unsigned order, unsigned long nslabs)
-{
-	return (void *)__get_free_pages(GFP_DMA | __GFP_NOWARN, order);
-}
-
 dma_addr_t swiotlb_phys_to_bus(struct device *hwdev, phys_addr_t paddr)
 {
 	return paddr;
-- 
cgit v1.2.3


From cf56e3f2e8a8d5b7bc719980869b0e7985c256f3 Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Fri, 10 Jul 2009 10:04:52 +0900
Subject: swiotlb: remove swiotlb_arch_range_needs_mapping

Nobody uses swiotlb_arch_range_needs_mapping().

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Becky Bruce <beckyb@kernel.crashing.org>
---
 arch/x86/kernel/pci-swiotlb.c | 5 -----
 1 file changed, 5 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/pci-swiotlb.c b/arch/x86/kernel/pci-swiotlb.c
index ea675cfe76f..165bd7f93bb 100644
--- a/arch/x86/kernel/pci-swiotlb.c
+++ b/arch/x86/kernel/pci-swiotlb.c
@@ -23,11 +23,6 @@ phys_addr_t swiotlb_bus_to_phys(struct device *hwdev, dma_addr_t baddr)
 	return baddr;
 }
 
-int __weak swiotlb_arch_range_needs_mapping(phys_addr_t paddr, size_t size)
-{
-	return 0;
-}
-
 static void *x86_swiotlb_alloc_coherent(struct device *hwdev, size_t size,
 					dma_addr_t *dma_handle, gfp_t flags)
 {
-- 
cgit v1.2.3


From 02ca646e73f3cb9be69e339841b94edae675e248 Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Thu, 23 Jul 2009 11:18:49 +0900
Subject: swiotlb: remove unnecessary swiotlb_bus_to_virt

swiotlb_bus_to_virt is unncessary; we can use swiotlb_bus_to_phys and
phys_to_virt instead.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Becky Bruce <beckyb@kernel.crashing.org>
---
 arch/powerpc/kernel/dma-swiotlb.c | 10 ----------
 1 file changed, 10 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/dma-swiotlb.c b/arch/powerpc/kernel/dma-swiotlb.c
index 68ccf11e4f1..41534ae2f58 100644
--- a/arch/powerpc/kernel/dma-swiotlb.c
+++ b/arch/powerpc/kernel/dma-swiotlb.c
@@ -24,16 +24,6 @@
 int swiotlb __read_mostly;
 unsigned int ppc_swiotlb_enable;
 
-void *swiotlb_bus_to_virt(struct device *hwdev, dma_addr_t addr)
-{
-	unsigned long pfn = PFN_DOWN(swiotlb_bus_to_phys(hwdev, addr));
-	void *pageaddr = page_address(pfn_to_page(pfn));
-
-	if (pageaddr != NULL)
-		return pageaddr + (addr % PAGE_SIZE);
-	return NULL;
-}
-
 dma_addr_t swiotlb_phys_to_bus(struct device *hwdev, phys_addr_t paddr)
 {
 	return paddr + get_dma_direct_offset(hwdev);
-- 
cgit v1.2.3


From 99becaca86d184a4433e9fde879ff97303d7669f Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Fri, 10 Jul 2009 10:04:54 +0900
Subject: x86: add dma_capable() to replace is_buffer_dma_capable()

dma_capable() eventually replaces is_buffer_dma_capable(), which tells
if a memory area is dma-capable or not. The problem of
is_buffer_dma_capable() is that it doesn't take a pointer to struct
device so it doesn't work for POWERPC.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
---
 arch/x86/include/asm/dma-mapping.h | 8 ++++++++
 1 file changed, 8 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/include/asm/dma-mapping.h b/arch/x86/include/asm/dma-mapping.h
index 1c3f9435f1c..adac59c8f69 100644
--- a/arch/x86/include/asm/dma-mapping.h
+++ b/arch/x86/include/asm/dma-mapping.h
@@ -55,6 +55,14 @@ extern int dma_set_mask(struct device *dev, u64 mask);
 extern void *dma_generic_alloc_coherent(struct device *dev, size_t size,
 					dma_addr_t *dma_addr, gfp_t flag);
 
+static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size)
+{
+	if (!dev->dma_mask)
+		return 0;
+
+	return addr + size <= *dev->dma_mask;
+}
+
 static inline void
 dma_cache_sync(struct device *dev, void *vaddr, size_t size,
 	enum dma_data_direction dir)
-- 
cgit v1.2.3


From a4c2baa6e148adfb27beaf16b6fb6d465b5b3acb Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Fri, 10 Jul 2009 10:04:55 +0900
Subject: x86: replace is_buffer_dma_capable() with dma_capable

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
---
 arch/x86/kernel/pci-dma.c     | 2 +-
 arch/x86/kernel/pci-gart_64.c | 5 ++---
 arch/x86/kernel/pci-nommu.c   | 2 +-
 3 files changed, 4 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c
index 1a041bcf506..3c945c0b350 100644
--- a/arch/x86/kernel/pci-dma.c
+++ b/arch/x86/kernel/pci-dma.c
@@ -147,7 +147,7 @@ again:
 		return NULL;
 
 	addr = page_to_phys(page);
-	if (!is_buffer_dma_capable(dma_mask, addr, size)) {
+	if (addr + size > dma_mask) {
 		__free_pages(page, get_order(size));
 
 		if (dma_mask < DMA_BIT_MASK(32) && !(flag & GFP_DMA)) {
diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c
index d2e56b8f48e..98a827ee9ed 100644
--- a/arch/x86/kernel/pci-gart_64.c
+++ b/arch/x86/kernel/pci-gart_64.c
@@ -190,14 +190,13 @@ static void iommu_full(struct device *dev, size_t size, int dir)
 static inline int
 need_iommu(struct device *dev, unsigned long addr, size_t size)
 {
-	return force_iommu ||
-		!is_buffer_dma_capable(*dev->dma_mask, addr, size);
+	return force_iommu || !dma_capable(dev, addr, size);
 }
 
 static inline int
 nonforced_iommu(struct device *dev, unsigned long addr, size_t size)
 {
-	return !is_buffer_dma_capable(*dev->dma_mask, addr, size);
+	return !dma_capable(dev, addr, size);
 }
 
 /* Map a single continuous physical area into the IOMMU.
diff --git a/arch/x86/kernel/pci-nommu.c b/arch/x86/kernel/pci-nommu.c
index 71d412a09f3..c0a4222bf62 100644
--- a/arch/x86/kernel/pci-nommu.c
+++ b/arch/x86/kernel/pci-nommu.c
@@ -14,7 +14,7 @@
 static int
 check_addr(char *name, struct device *hwdev, dma_addr_t bus, size_t size)
 {
-	if (hwdev && !is_buffer_dma_capable(*hwdev->dma_mask, bus, size)) {
+	if (hwdev && !dma_capable(hwdev, bus, size)) {
 		if (*hwdev->dma_mask >= DMA_BIT_MASK(32))
 			printk(KERN_ERR
 			    "nommu_%s: overflow %Lx+%zu of device mask %Lx\n",
-- 
cgit v1.2.3


From a0b00ca84b3ecb9eebd62ad34880d8cc0d988c8a Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Fri, 10 Jul 2009 10:04:56 +0900
Subject: ia64: add dma_capable() to replace is_buffer_dma_capable()

dma_capable() eventually replaces is_buffer_dma_capable(), which tells
if a memory area is dma-capable or not. The problem of
is_buffer_dma_capable() is that it doesn't take a pointer to struct
device so it doesn't work for POWERPC.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
---
 arch/ia64/include/asm/dma-mapping.h | 8 ++++++++
 1 file changed, 8 insertions(+)

(limited to 'arch')

diff --git a/arch/ia64/include/asm/dma-mapping.h b/arch/ia64/include/asm/dma-mapping.h
index 5a61b5c2e18..88d0f860394 100644
--- a/arch/ia64/include/asm/dma-mapping.h
+++ b/arch/ia64/include/asm/dma-mapping.h
@@ -69,6 +69,14 @@ dma_set_mask (struct device *dev, u64 mask)
 	return 0;
 }
 
+static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size)
+{
+	if (!dev->dma_mask)
+		return 0;
+
+	return addr + size <= *dev->dma_mask;
+}
+
 extern int dma_get_cache_alignment(void);
 
 static inline void
-- 
cgit v1.2.3


From 9a937c91eea31c4b594ea49a2a23c57003e04987 Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Fri, 10 Jul 2009 10:04:57 +0900
Subject: powerpc: add dma_capable() to replace is_buffer_dma_capable()

dma_capable() eventually replaces is_buffer_dma_capable(), which tells
if a memory area is dma-capable or not. The problem of
is_buffer_dma_capable() is that it doesn't take a pointer to struct
device so it doesn't work for POWERPC.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Becky Bruce <beckyb@kernel.crashing.org>
---
 arch/powerpc/include/asm/dma-mapping.h | 13 +++++++++++++
 1 file changed, 13 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h
index b44aaabdd1a..6ff1f8581d7 100644
--- a/arch/powerpc/include/asm/dma-mapping.h
+++ b/arch/powerpc/include/asm/dma-mapping.h
@@ -424,6 +424,19 @@ static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
 #endif
 }
 
+static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size)
+{
+	struct dma_mapping_ops *ops = get_dma_ops(dev);
+
+	if (ops->addr_needs_map && ops->addr_needs_map(dev, addr, size))
+		return 0;
+
+	if (!dev->dma_mask)
+		return 0;
+
+	return addr + size <= *dev->dma_mask;
+}
+
 #define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
 #define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
 #ifdef CONFIG_NOT_COHERENT_CACHE
-- 
cgit v1.2.3


From 30945fdf6a08f52370dab3bc162e96c4b4e36082 Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Fri, 10 Jul 2009 10:04:59 +0900
Subject: powerpc: remove unncesary swiotlb_arch_address_needs_mapping

swiotlb doesn't use swiotlb_arch_address_needs_mapping(); it uses
dma_capalbe(). We can remove unnecessary
swiotlb_arch_address_needs_mapping().

We can remove swiotlb_addr_needs_map() and is_buffer_dma_capable() in
swiotlb_pci_addr_needs_map() too; dma_capable() handles the features
that both provide.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Becky Bruce <beckyb@kernel.crashing.org>
---
 arch/powerpc/kernel/dma-swiotlb.c | 27 +--------------------------
 1 file changed, 1 insertion(+), 26 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/dma-swiotlb.c b/arch/powerpc/kernel/dma-swiotlb.c
index 41534ae2f58..a3bbe02cda9 100644
--- a/arch/powerpc/kernel/dma-swiotlb.c
+++ b/arch/powerpc/kernel/dma-swiotlb.c
@@ -35,29 +35,12 @@ phys_addr_t swiotlb_bus_to_phys(struct device *hwdev, dma_addr_t baddr)
 	return baddr - get_dma_direct_offset(hwdev);
 }
 
-/*
- * Determine if an address needs bounce buffering via swiotlb.
- * Going forward I expect the swiotlb code to generalize on using
- * a dma_ops->addr_needs_map, and this function will move from here to the
- * generic swiotlb code.
- */
-int
-swiotlb_arch_address_needs_mapping(struct device *hwdev, dma_addr_t addr,
-				   size_t size)
-{
-	struct dma_mapping_ops *dma_ops = get_dma_ops(hwdev);
-
-	BUG_ON(!dma_ops);
-	return dma_ops->addr_needs_map(hwdev, addr, size);
-}
-
 /*
  * Determine if an address is reachable by a pci device, or if we must bounce.
  */
 static int
 swiotlb_pci_addr_needs_map(struct device *hwdev, dma_addr_t addr, size_t size)
 {
-	u64 mask = dma_get_mask(hwdev);
 	dma_addr_t max;
 	struct pci_controller *hose;
 	struct pci_dev *pdev = to_pci_dev(hwdev);
@@ -69,16 +52,9 @@ swiotlb_pci_addr_needs_map(struct device *hwdev, dma_addr_t addr, size_t size)
 	if ((addr + size > max) | (addr < hose->dma_window_base_cur))
 		return 1;
 
-	return !is_buffer_dma_capable(mask, addr, size);
-}
-
-static int
-swiotlb_addr_needs_map(struct device *hwdev, dma_addr_t addr, size_t size)
-{
-	return !is_buffer_dma_capable(dma_get_mask(hwdev), addr, size);
+	return 0;
 }
 
-
 /*
  * At the moment, all platforms that use this code only require
  * swiotlb to be used if we're operating on HIGHMEM.  Since
@@ -94,7 +70,6 @@ struct dma_mapping_ops swiotlb_dma_ops = {
 	.dma_supported = swiotlb_dma_supported,
 	.map_page = swiotlb_map_page,
 	.unmap_page = swiotlb_unmap_page,
-	.addr_needs_map = swiotlb_addr_needs_map,
 	.sync_single_range_for_cpu = swiotlb_sync_single_range_for_cpu,
 	.sync_single_range_for_device = swiotlb_sync_single_range_for_device,
 	.sync_sg_for_cpu = swiotlb_sync_sg_for_cpu,
-- 
cgit v1.2.3


From 8d4f5339d1ee4027c07e6b2a1cfa9dc41b0d383b Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Fri, 10 Jul 2009 10:05:01 +0900
Subject: x86, IA64, powerpc: add phys_to_dma() and dma_to_phys()

This adds two functions, phys_to_dma() and dma_to_phys() to x86, IA64
and powerpc. swiotlb uses them. phys_to_dma() converts a physical
address to a dma address. dma_to_phys() does the opposite.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Becky Bruce <beckyb@kernel.crashing.org>
---
 arch/ia64/include/asm/dma-mapping.h    | 10 ++++++++++
 arch/powerpc/include/asm/dma-mapping.h | 10 ++++++++++
 arch/x86/include/asm/dma-mapping.h     | 10 ++++++++++
 3 files changed, 30 insertions(+)

(limited to 'arch')

diff --git a/arch/ia64/include/asm/dma-mapping.h b/arch/ia64/include/asm/dma-mapping.h
index 88d0f860394..f91829de329 100644
--- a/arch/ia64/include/asm/dma-mapping.h
+++ b/arch/ia64/include/asm/dma-mapping.h
@@ -77,6 +77,16 @@ static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size)
 	return addr + size <= *dev->dma_mask;
 }
 
+static inline dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr)
+{
+	return paddr;
+}
+
+static inline phys_addr_t dma_to_phys(struct device *dev, dma_addr_t daddr)
+{
+	return daddr;
+}
+
 extern int dma_get_cache_alignment(void);
 
 static inline void
diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h
index 6ff1f8581d7..0c34371ec49 100644
--- a/arch/powerpc/include/asm/dma-mapping.h
+++ b/arch/powerpc/include/asm/dma-mapping.h
@@ -437,6 +437,16 @@ static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size)
 	return addr + size <= *dev->dma_mask;
 }
 
+static inline dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr)
+{
+	return paddr + get_dma_direct_offset(dev);
+}
+
+static inline phys_addr_t dma_to_phys(struct device *dev, dma_addr_t daddr)
+{
+	return daddr - get_dma_direct_offset(dev);
+}
+
 #define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
 #define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
 #ifdef CONFIG_NOT_COHERENT_CACHE
diff --git a/arch/x86/include/asm/dma-mapping.h b/arch/x86/include/asm/dma-mapping.h
index adac59c8f69..0ee770d23d0 100644
--- a/arch/x86/include/asm/dma-mapping.h
+++ b/arch/x86/include/asm/dma-mapping.h
@@ -63,6 +63,16 @@ static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size)
 	return addr + size <= *dev->dma_mask;
 }
 
+static inline dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr)
+{
+	return paddr;
+}
+
+static inline phys_addr_t dma_to_phys(struct device *dev, dma_addr_t daddr)
+{
+	return daddr;
+}
+
 static inline void
 dma_cache_sync(struct device *dev, void *vaddr, size_t size,
 	enum dma_data_direction dir)
-- 
cgit v1.2.3


From 8ab7ff42c9dd9231706a4ba7120eed22ff52a93b Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Fri, 10 Jul 2009 10:05:03 +0900
Subject: powerpc: remove unused swiotlb_phys_to_bus() and
 swiotlb_bus_to_phys()

phys_to_dma() and dma_to_phys() are used instead of
swiotlb_phys_to_bus() and swiotlb_bus_to_phys().

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Becky Bruce <beckyb@kernel.crashing.org>
---
 arch/powerpc/kernel/dma-swiotlb.c | 11 -----------
 1 file changed, 11 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/dma-swiotlb.c b/arch/powerpc/kernel/dma-swiotlb.c
index a3bbe02cda9..e8a57de85bc 100644
--- a/arch/powerpc/kernel/dma-swiotlb.c
+++ b/arch/powerpc/kernel/dma-swiotlb.c
@@ -24,17 +24,6 @@
 int swiotlb __read_mostly;
 unsigned int ppc_swiotlb_enable;
 
-dma_addr_t swiotlb_phys_to_bus(struct device *hwdev, phys_addr_t paddr)
-{
-	return paddr + get_dma_direct_offset(hwdev);
-}
-
-phys_addr_t swiotlb_bus_to_phys(struct device *hwdev, dma_addr_t baddr)
-
-{
-	return baddr - get_dma_direct_offset(hwdev);
-}
-
 /*
  * Determine if an address is reachable by a pci device, or if we must bounce.
  */
-- 
cgit v1.2.3


From b683d42693c4e92b838117f5c6f7b90bfa1525c9 Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Fri, 10 Jul 2009 10:05:04 +0900
Subject: x86: remove unused swiotlb_phys_to_bus() and swiotlb_bus_to_phys()

phys_to_dma() and dma_to_phys() are used instead of
swiotlb_phys_to_bus() and swiotlb_bus_to_phys().

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
---
 arch/x86/kernel/pci-swiotlb.c | 10 ----------
 1 file changed, 10 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/pci-swiotlb.c b/arch/x86/kernel/pci-swiotlb.c
index 165bd7f93bb..e8a35016115 100644
--- a/arch/x86/kernel/pci-swiotlb.c
+++ b/arch/x86/kernel/pci-swiotlb.c
@@ -13,16 +13,6 @@
 
 int swiotlb __read_mostly;
 
-dma_addr_t swiotlb_phys_to_bus(struct device *hwdev, phys_addr_t paddr)
-{
-	return paddr;
-}
-
-phys_addr_t swiotlb_bus_to_phys(struct device *hwdev, dma_addr_t baddr)
-{
-	return baddr;
-}
-
 static void *x86_swiotlb_alloc_coherent(struct device *hwdev, size_t size,
 					dma_addr_t *dma_handle, gfp_t flags)
 {
-- 
cgit v1.2.3


From a5b92cc348299c20be215b9f4b50853ecfbf3864 Mon Sep 17 00:00:00 2001
From: Syed Rafiuddin <rafiuddin.syed@ti.com>
Date: Tue, 28 Jul 2009 18:57:10 +0530
Subject: ARM: OMAP4: Add McBSP support

This patch creates McBSP support on OMAP4430 development platform. This patch
includes corresponding base address changes for OMAP4.

Signed-off-by: Syed Rafiuddin <rafiuddin.syed@ti.com>
---
 arch/arm/mach-omap2/mcbsp.c             | 41 +++++++++++++++++++++++++++++++++
 arch/arm/plat-omap/include/mach/mcbsp.h |  8 ++++++-
 arch/arm/plat-omap/mcbsp.c              |  2 +-
 3 files changed, 49 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index a5c0f0435cd..d49dfb5e931 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -169,6 +169,42 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 #define OMAP34XX_MCBSP_PDATA_SZ		0
 #endif
 
+static struct omap_mcbsp_platform_data omap44xx_mcbsp_pdata[] = {
+	{
+		.phys_base      = OMAP44XX_MCBSP1_BASE,
+		.dma_rx_sync    = OMAP44XX_DMA_MCBSP1_RX,
+		.dma_tx_sync    = OMAP44XX_DMA_MCBSP1_TX,
+		.rx_irq         = INT_24XX_MCBSP1_IRQ_RX,
+		.tx_irq         = INT_24XX_MCBSP1_IRQ_TX,
+		.ops            = &omap2_mcbsp_ops,
+	},
+	{
+		.phys_base      = OMAP44XX_MCBSP2_BASE,
+		.dma_rx_sync    = OMAP44XX_DMA_MCBSP2_RX,
+		.dma_tx_sync    = OMAP44XX_DMA_MCBSP2_TX,
+		.rx_irq         = INT_24XX_MCBSP2_IRQ_RX,
+		.tx_irq         = INT_24XX_MCBSP2_IRQ_TX,
+		.ops            = &omap2_mcbsp_ops,
+	},
+	{
+		.phys_base      = OMAP44XX_MCBSP3_BASE,
+		.dma_rx_sync    = OMAP44XX_DMA_MCBSP3_RX,
+		.dma_tx_sync    = OMAP44XX_DMA_MCBSP3_TX,
+		.rx_irq         = INT_24XX_MCBSP3_IRQ_RX,
+		.tx_irq         = INT_24XX_MCBSP3_IRQ_TX,
+		.ops            = &omap2_mcbsp_ops,
+	},
+	{
+		.phys_base      = OMAP44XX_MCBSP4_BASE,
+		.dma_rx_sync    = OMAP44XX_DMA_MCBSP4_RX,
+		.dma_tx_sync    = OMAP44XX_DMA_MCBSP4_TX,
+		.rx_irq         = INT_24XX_MCBSP4_IRQ_RX,
+		.tx_irq         = INT_24XX_MCBSP4_IRQ_TX,
+		.ops            = &omap2_mcbsp_ops,
+	},
+};
+#define OMAP44XX_MCBSP_PDATA_SZ		ARRAY_SIZE(omap44xx_mcbsp_pdata)
+
 static int __init omap2_mcbsp_init(void)
 {
 	if (cpu_is_omap2420())
@@ -177,6 +213,8 @@ static int __init omap2_mcbsp_init(void)
 		omap_mcbsp_count = OMAP2430_MCBSP_PDATA_SZ;
 	if (cpu_is_omap34xx())
 		omap_mcbsp_count = OMAP34XX_MCBSP_PDATA_SZ;
+	if (cpu_is_omap44xx())
+		omap_mcbsp_count = OMAP44XX_MCBSP_PDATA_SZ;
 
 	mcbsp_ptr = kzalloc(omap_mcbsp_count * sizeof(struct omap_mcbsp *),
 								GFP_KERNEL);
@@ -192,6 +230,9 @@ static int __init omap2_mcbsp_init(void)
 	if (cpu_is_omap34xx())
 		omap_mcbsp_register_board_cfg(omap34xx_mcbsp_pdata,
 						OMAP34XX_MCBSP_PDATA_SZ);
+	if (cpu_is_omap44xx())
+		omap_mcbsp_register_board_cfg(omap44xx_mcbsp_pdata,
+						OMAP44XX_MCBSP_PDATA_SZ);
 
 	return omap_mcbsp_init();
 }
diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h
index bb154ea7676..ec6f81e06d3 100644
--- a/arch/arm/plat-omap/include/mach/mcbsp.h
+++ b/arch/arm/plat-omap/include/mach/mcbsp.h
@@ -53,6 +53,11 @@
 #define OMAP34XX_MCBSP4_BASE	0x49026000
 #define OMAP34XX_MCBSP5_BASE	0x48096000
 
+#define OMAP44XX_MCBSP1_BASE	0x49022000
+#define OMAP44XX_MCBSP2_BASE	0x49024000
+#define OMAP44XX_MCBSP3_BASE	0x49026000
+#define OMAP44XX_MCBSP4_BASE	0x48074000
+
 #if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP730)
 
 #define OMAP_MCBSP_REG_DRR2	0x00
@@ -98,7 +103,8 @@
 #define AUDIO_DMA_TX		OMAP_DMA_MCBSP1_TX
 #define AUDIO_DMA_RX		OMAP_DMA_MCBSP1_RX
 
-#elif defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#elif defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+	defined(CONFIG_ARCH_OMAP4)
 
 #define OMAP_MCBSP_REG_DRR2	0x00
 #define OMAP_MCBSP_REG_DRR1	0x04
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index efa0e0111f3..e42fa7cfc79 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -191,7 +191,7 @@ void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg *config)
 	OMAP_MCBSP_WRITE(io_base, MCR2, config->mcr2);
 	OMAP_MCBSP_WRITE(io_base, MCR1, config->mcr1);
 	OMAP_MCBSP_WRITE(io_base, PCR0, config->pcr0);
-	if (cpu_is_omap2430() || cpu_is_omap34xx()) {
+	if (cpu_is_omap2430() || cpu_is_omap34xx() || cpu_is_omap44xx()) {
 		OMAP_MCBSP_WRITE(io_base, XCCR, config->xccr);
 		OMAP_MCBSP_WRITE(io_base, RCCR, config->rccr);
 	}
-- 
cgit v1.2.3


From 085b54d99b8ee999e7905b8f16e201e0da8ba369 Mon Sep 17 00:00:00 2001
From: Syed Rafiuddin <rafiuddin.syed@ti.com>
Date: Tue, 28 Jul 2009 18:57:22 +0530
Subject: ARM: OMAP4: Add UART4 support

This patch adds UART4 support on OMAP4430 development platform.

Signed-off-by: Syed Rafiuddin <rafiuddin.syed@ti.com>
---
 arch/arm/mach-omap2/board-4430sdp.c |  2 +-
 arch/arm/mach-omap2/serial.c        | 10 ++++++++++
 2 files changed, 11 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 57e477bd89c..7e1e721f032 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -39,7 +39,7 @@ static struct platform_device *sdp4430_devices[] __initdata = {
 };
 
 static struct omap_uart_config sdp4430_uart_config __initdata = {
-	.enabled_uarts	= (1 << 0) | (1 << 1) | (1 << 2),
+	.enabled_uarts	= (1 << 0) | (1 << 1) | (1 << 2) | (1 << 3),
 };
 
 static struct omap_lcd_config sdp4430_lcd_config __initdata = {
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index b094c15bfe4..c0bea75f13f 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -97,6 +97,16 @@ static struct plat_serial8250_port serial_platform_data[] = {
 		.regshift	= 2,
 		.uartclk	= OMAP24XX_BASE_BAUD * 16,
 	}, {
+#ifdef CONFIG_ARCH_OMAP4
+		.membase	= IO_ADDRESS(OMAP_UART4_BASE),
+		.mapbase	= OMAP_UART4_BASE,
+		.irq		= 70,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= OMAP24XX_BASE_BAUD * 16,
+	}, {
+#endif
 		.flags		= 0
 	}
 };
-- 
cgit v1.2.3


From 78a1a6d3411de1a8b0dc1cb92754b5f12f251912 Mon Sep 17 00:00:00 2001
From: Syed Rafiuddin <rafiuddin.syed@ti.com>
Date: Tue, 28 Jul 2009 18:57:30 +0530
Subject: ARM: OMAP4: Update the GPIO support

This patch adds GPIO support on OMAP4430 development platform.

Signed-off-by: Syed Rafiuddin <rafiuddin.syed@ti.com>
---
 arch/arm/plat-omap/gpio.c | 249 ++++++++++++++++++++++++++++++++++++----------
 1 file changed, 198 insertions(+), 51 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 26b387c1242..f0b71680ec5 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -138,6 +138,32 @@
 #define OMAP24XX_GPIO_CLEARDATAOUT	0x0090
 #define OMAP24XX_GPIO_SETDATAOUT	0x0094
 
+#define OMAP4_GPIO_REVISION		0x0000
+#define OMAP4_GPIO_SYSCONFIG		0x0010
+#define OMAP4_GPIO_EOI			0x0020
+#define OMAP4_GPIO_IRQSTATUSRAW0	0x0024
+#define OMAP4_GPIO_IRQSTATUSRAW1	0x0028
+#define OMAP4_GPIO_IRQSTATUS0		0x002c
+#define OMAP4_GPIO_IRQSTATUS1		0x0030
+#define OMAP4_GPIO_IRQSTATUSSET0	0x0034
+#define OMAP4_GPIO_IRQSTATUSSET1	0x0038
+#define OMAP4_GPIO_IRQSTATUSCLR0	0x003c
+#define OMAP4_GPIO_IRQSTATUSCLR1	0x0040
+#define OMAP4_GPIO_IRQWAKEN0		0x0044
+#define OMAP4_GPIO_IRQWAKEN1		0x0048
+#define OMAP4_GPIO_SYSSTATUS		0x0104
+#define OMAP4_GPIO_CTRL			0x0130
+#define OMAP4_GPIO_OE			0x0134
+#define OMAP4_GPIO_DATAIN		0x0138
+#define OMAP4_GPIO_DATAOUT		0x013c
+#define OMAP4_GPIO_LEVELDETECT0		0x0140
+#define OMAP4_GPIO_LEVELDETECT1		0x0144
+#define OMAP4_GPIO_RISINGDETECT		0x0148
+#define OMAP4_GPIO_FALLINGDETECT	0x014c
+#define OMAP4_GPIO_DEBOUNCENABLE	0x0150
+#define OMAP4_GPIO_DEBOUNCINGTIME	0x0154
+#define OMAP4_GPIO_CLEARDATAOUT		0x0190
+#define OMAP4_GPIO_SETDATAOUT		0x0194
 /*
  * omap34xx specific GPIO registers
  */
@@ -386,11 +412,15 @@ static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input)
 		reg += OMAP850_GPIO_DIR_CONTROL;
 		break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-			defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 	case METHOD_GPIO_24XX:
 		reg += OMAP24XX_GPIO_OE;
 		break;
+#endif
+#if defined(CONFIG_ARCH_OMAP4)
+	case METHOD_GPIO_24XX:
+		reg += OMAP4_GPIO_OE;
+		break;
 #endif
 	default:
 		WARN_ON(1);
@@ -459,8 +489,7 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
 			l &= ~(1 << gpio);
 		break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-			defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 	case METHOD_GPIO_24XX:
 		if (enable)
 			reg += OMAP24XX_GPIO_SETDATAOUT;
@@ -468,6 +497,15 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
 			reg += OMAP24XX_GPIO_CLEARDATAOUT;
 		l = 1 << gpio;
 		break;
+#endif
+#ifdef CONFIG_ARCH_OMAP4
+	case METHOD_GPIO_24XX:
+		if (enable)
+			reg += OMAP4_GPIO_SETDATAOUT;
+		else
+			reg += OMAP4_GPIO_CLEARDATAOUT;
+		l = 1 << gpio;
+		break;
 #endif
 	default:
 		WARN_ON(1);
@@ -511,11 +549,15 @@ static int __omap_get_gpio_datain(int gpio)
 		reg += OMAP850_GPIO_DATA_INPUT;
 		break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-			defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 	case METHOD_GPIO_24XX:
 		reg += OMAP24XX_GPIO_DATAIN;
 		break;
+#endif
+#ifdef CONFIG_ARCH_OMAP4
+	case METHOD_GPIO_24XX:
+		reg += OMAP4_GPIO_DATAIN;
+		break;
 #endif
 	default:
 		return -EINVAL;
@@ -544,7 +586,11 @@ void omap_set_gpio_debounce(int gpio, int enable)
 
 	bank = get_gpio_bank(gpio);
 	reg = bank->base;
+#ifdef CONFIG_ARCH_OMAP4
+	reg += OMAP4_GPIO_DEBOUNCENABLE;
+#else
 	reg += OMAP24XX_GPIO_DEBOUNCE_EN;
+#endif
 
 	spin_lock_irqsave(&bank->lock, flags);
 	val = __raw_readl(reg);
@@ -581,7 +627,11 @@ void omap_set_gpio_debounce_time(int gpio, int enc_time)
 	reg = bank->base;
 
 	enc_time &= 0xff;
+#ifdef CONFIG_ARCH_OMAP4
+	reg += OMAP4_GPIO_DEBOUNCINGTIME;
+#else
 	reg += OMAP24XX_GPIO_DEBOUNCE_VAL;
+#endif
 	__raw_writel(enc_time, reg);
 }
 EXPORT_SYMBOL(omap_set_gpio_debounce_time);
@@ -593,23 +643,46 @@ static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio,
 {
 	void __iomem *base = bank->base;
 	u32 gpio_bit = 1 << gpio;
+	u32 val;
 
-	MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT0, gpio_bit,
-		trigger & IRQ_TYPE_LEVEL_LOW);
-	MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT1, gpio_bit,
-		trigger & IRQ_TYPE_LEVEL_HIGH);
-	MOD_REG_BIT(OMAP24XX_GPIO_RISINGDETECT, gpio_bit,
-		trigger & IRQ_TYPE_EDGE_RISING);
-	MOD_REG_BIT(OMAP24XX_GPIO_FALLINGDETECT, gpio_bit,
-		trigger & IRQ_TYPE_EDGE_FALLING);
-
+	if (cpu_is_omap44xx()) {
+		MOD_REG_BIT(OMAP4_GPIO_LEVELDETECT0, gpio_bit,
+			trigger & IRQ_TYPE_LEVEL_LOW);
+		MOD_REG_BIT(OMAP4_GPIO_LEVELDETECT1, gpio_bit,
+			trigger & IRQ_TYPE_LEVEL_HIGH);
+		MOD_REG_BIT(OMAP4_GPIO_RISINGDETECT, gpio_bit,
+			trigger & IRQ_TYPE_EDGE_RISING);
+		MOD_REG_BIT(OMAP4_GPIO_FALLINGDETECT, gpio_bit,
+			trigger & IRQ_TYPE_EDGE_FALLING);
+	} else {
+		MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT0, gpio_bit,
+			trigger & IRQ_TYPE_LEVEL_LOW);
+		MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT1, gpio_bit,
+			trigger & IRQ_TYPE_LEVEL_HIGH);
+		MOD_REG_BIT(OMAP24XX_GPIO_RISINGDETECT, gpio_bit,
+			trigger & IRQ_TYPE_EDGE_RISING);
+		MOD_REG_BIT(OMAP24XX_GPIO_FALLINGDETECT, gpio_bit,
+			trigger & IRQ_TYPE_EDGE_FALLING);
+	}
 	if (likely(!(bank->non_wakeup_gpios & gpio_bit))) {
-		if (trigger != 0)
-			__raw_writel(1 << gpio, bank->base
+		if (cpu_is_omap44xx()) {
+			if (trigger != 0)
+				__raw_writel(1 << gpio, bank->base+
+						OMAP4_GPIO_IRQWAKEN0);
+			else {
+				val = __raw_readl(bank->base +
+							OMAP4_GPIO_IRQWAKEN0);
+				__raw_writel(val & (~(1 << gpio)), bank->base +
+							 OMAP4_GPIO_IRQWAKEN0);
+			}
+		} else {
+			if (trigger != 0)
+				__raw_writel(1 << gpio, bank->base
 					+ OMAP24XX_GPIO_SETWKUENA);
-		else
-			__raw_writel(1 << gpio, bank->base
+			else
+				__raw_writel(1 << gpio, bank->base
 					+ OMAP24XX_GPIO_CLEARWKUENA);
+		}
 	} else {
 		if (trigger != 0)
 			bank->enabled_non_wakeup_gpios |= gpio_bit;
@@ -617,9 +690,15 @@ static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio,
 			bank->enabled_non_wakeup_gpios &= ~gpio_bit;
 	}
 
-	bank->level_mask =
-		__raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0) |
-		__raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1);
+	if (cpu_is_omap44xx()) {
+		bank->level_mask =
+			__raw_readl(bank->base + OMAP4_GPIO_LEVELDETECT0) |
+			__raw_readl(bank->base + OMAP4_GPIO_LEVELDETECT1);
+	} else {
+		bank->level_mask =
+			__raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0) |
+			__raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1);
+	}
 }
 #endif
 
@@ -783,11 +862,15 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
 		reg += OMAP850_GPIO_INT_STATUS;
 		break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-				defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 	case METHOD_GPIO_24XX:
 		reg += OMAP24XX_GPIO_IRQSTATUS1;
 		break;
+#endif
+#if defined(CONFIG_ARCH_OMAP4)
+	case METHOD_GPIO_24XX:
+		reg += OMAP4_GPIO_IRQSTATUS0;
+		break;
 #endif
 	default:
 		WARN_ON(1);
@@ -798,12 +881,16 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
 	/* Workaround for clearing DSP GPIO interrupts to allow retention */
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 	reg = bank->base + OMAP24XX_GPIO_IRQSTATUS2;
-	if (cpu_is_omap24xx() || cpu_is_omap34xx())
+#endif
+#if defined(CONFIG_ARCH_OMAP4)
+	reg = bank->base + OMAP4_GPIO_IRQSTATUS1;
+#endif
+	if (cpu_is_omap24xx() || cpu_is_omap34xx() || cpu_is_omap44xx()) {
 		__raw_writel(gpio_mask, reg);
 
 	/* Flush posted write for the irq status to avoid spurious interrupts */
 	__raw_readl(reg);
-#endif
+	}
 }
 
 static inline void _clear_gpio_irqstatus(struct gpio_bank *bank, int gpio)
@@ -853,12 +940,17 @@ static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank)
 		inv = 1;
 		break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-				defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 	case METHOD_GPIO_24XX:
 		reg += OMAP24XX_GPIO_IRQENABLE1;
 		mask = 0xffffffff;
 		break;
+#endif
+#if defined(CONFIG_ARCH_OMAP4)
+	case METHOD_GPIO_24XX:
+		reg += OMAP4_GPIO_IRQSTATUSSET0;
+		mask = 0xffffffff;
+		break;
 #endif
 	default:
 		WARN_ON(1);
@@ -927,8 +1019,7 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab
 			l |= gpio_mask;
 		break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-		defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 	case METHOD_GPIO_24XX:
 		if (enable)
 			reg += OMAP24XX_GPIO_SETIRQENABLE1;
@@ -936,6 +1027,15 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab
 			reg += OMAP24XX_GPIO_CLEARIRQENABLE1;
 		l = gpio_mask;
 		break;
+#endif
+#ifdef CONFIG_ARCH_OMAP4
+	case METHOD_GPIO_24XX:
+		if (enable)
+			reg += OMAP4_GPIO_IRQSTATUSSET0;
+		else
+			reg += OMAP4_GPIO_IRQSTATUSCLR0;
+		l = gpio_mask;
+		break;
 #endif
 	default:
 		WARN_ON(1);
@@ -1112,10 +1212,13 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
 	if (bank->method == METHOD_GPIO_850)
 		isr_reg = bank->base + OMAP850_GPIO_INT_STATUS;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-				defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 	if (bank->method == METHOD_GPIO_24XX)
 		isr_reg = bank->base + OMAP24XX_GPIO_IRQSTATUS1;
+#endif
+#if defined(CONFIG_ARCH_OMAP4)
+	if (bank->method == METHOD_GPIO_24XX)
+		isr_reg = bank->base + OMAP4_GPIO_IRQSTATUS0;
 #endif
 	while(1) {
 		u32 isr_saved, level_mask = 0;
@@ -1547,7 +1650,7 @@ static int __init _omap_gpio_init(void)
 
 		gpio_bank_count = OMAP34XX_NR_GPIOS;
 		gpio_bank = gpio_bank_44xx;
-		rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION);
+		rev = __raw_readl(gpio_bank[0].base + OMAP4_GPIO_REVISION);
 		printk(KERN_INFO "OMAP44xx GPIO hardware version %d.%d\n",
 			(rev >> 4) & 0x0f, rev & 0x0f);
 	}
@@ -1581,7 +1684,16 @@ static int __init _omap_gpio_init(void)
 			static const u32 non_wakeup_gpios[] = {
 				0xe203ffc0, 0x08700040
 			};
-
+		if (cpu_is_omap44xx()) {
+			__raw_writel(0xffffffff, bank->base +
+						OMAP4_GPIO_IRQSTATUSCLR0);
+			__raw_writew(0x0015, bank->base +
+						OMAP4_GPIO_SYSCONFIG);
+			__raw_writel(0x00000000, bank->base +
+						 OMAP4_GPIO_DEBOUNCENABLE);
+			/* Initialize interface clock ungated, module enabled */
+			__raw_writel(0, bank->base + OMAP4_GPIO_CTRL);
+		} else {
 			__raw_writel(0x00000000, bank->base + OMAP24XX_GPIO_IRQENABLE1);
 			__raw_writel(0xffffffff, bank->base + OMAP24XX_GPIO_IRQSTATUS1);
 			__raw_writew(0x0015, bank->base + OMAP24XX_GPIO_SYSCONFIG);
@@ -1589,12 +1701,12 @@ static int __init _omap_gpio_init(void)
 
 			/* Initialize interface clock ungated, module enabled */
 			__raw_writel(0, bank->base + OMAP24XX_GPIO_CTRL);
+		}
 			if (i < ARRAY_SIZE(non_wakeup_gpios))
 				bank->non_wakeup_gpios = non_wakeup_gpios[i];
 			gpio_count = 32;
 		}
 #endif
-
 		/* REVISIT eventually switch from OMAP-specific gpio structs
 		 * over to the generic ones
 		 */
@@ -1680,13 +1792,19 @@ static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg)
 			wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
 			break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-				defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 		case METHOD_GPIO_24XX:
 			wake_status = bank->base + OMAP24XX_GPIO_WAKE_EN;
 			wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
 			wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA;
 			break;
+#endif
+#ifdef CONFIG_ARCH_OMAP4
+		case METHOD_GPIO_24XX:
+			wake_status = bank->base + OMAP4_GPIO_IRQWAKEN0;
+			wake_clear = bank->base + OMAP4_GPIO_IRQWAKEN0;
+			wake_set = bank->base + OMAP4_GPIO_IRQWAKEN0;
+			break;
 #endif
 		default:
 			continue;
@@ -1722,12 +1840,17 @@ static int omap_gpio_resume(struct sys_device *dev)
 			wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
 			break;
 #endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-			defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 		case METHOD_GPIO_24XX:
 			wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
 			wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA;
 			break;
+#endif
+#ifdef CONFIG_ARCH_OMAP4
+		case METHOD_GPIO_24XX:
+			wake_clear = bank->base + OMAP4_GPIO_IRQWAKEN0;
+			wake_set = bank->base + OMAP4_GPIO_IRQWAKEN0;
+			break;
 #endif
 		default:
 			continue;
@@ -1772,20 +1895,28 @@ void omap2_gpio_prepare_for_retention(void)
 
 		if (!(bank->enabled_non_wakeup_gpios))
 			continue;
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-				defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 		bank->saved_datain = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN);
 		l1 = __raw_readl(bank->base + OMAP24XX_GPIO_FALLINGDETECT);
 		l2 = __raw_readl(bank->base + OMAP24XX_GPIO_RISINGDETECT);
+#endif
+#ifdef CONFIG_ARCH_OMAP4
+		bank->saved_datain = __raw_readl(bank->base +
+							OMAP4_GPIO_DATAIN);
+		l1 = __raw_readl(bank->base + OMAP4_GPIO_FALLINGDETECT);
+		l2 = __raw_readl(bank->base + OMAP4_GPIO_RISINGDETECT);
 #endif
 		bank->saved_fallingdetect = l1;
 		bank->saved_risingdetect = l2;
 		l1 &= ~bank->enabled_non_wakeup_gpios;
 		l2 &= ~bank->enabled_non_wakeup_gpios;
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-			defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 		__raw_writel(l1, bank->base + OMAP24XX_GPIO_FALLINGDETECT);
 		__raw_writel(l2, bank->base + OMAP24XX_GPIO_RISINGDETECT);
+#endif
+#ifdef CONFIG_ARCH_OMAP4
+		__raw_writel(l1, bank->base + OMAP4_GPIO_FALLINGDETECT);
+		__raw_writel(l2, bank->base + OMAP4_GPIO_RISINGDETECT);
 #endif
 		c++;
 	}
@@ -1808,33 +1939,49 @@ void omap2_gpio_resume_after_retention(void)
 
 		if (!(bank->enabled_non_wakeup_gpios))
 			continue;
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-			defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 		__raw_writel(bank->saved_fallingdetect,
 				 bank->base + OMAP24XX_GPIO_FALLINGDETECT);
 		__raw_writel(bank->saved_risingdetect,
 				 bank->base + OMAP24XX_GPIO_RISINGDETECT);
+		l = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN);
+#endif
+#ifdef CONFIG_ARCH_OMAP4
+		__raw_writel(bank->saved_fallingdetect,
+				 bank->base + OMAP4_GPIO_FALLINGDETECT);
+		__raw_writel(bank->saved_risingdetect,
+				 bank->base + OMAP4_GPIO_RISINGDETECT);
+		l = __raw_readl(bank->base + OMAP4_GPIO_DATAIN);
 #endif
 		/* Check if any of the non-wakeup interrupt GPIOs have changed
 		 * state.  If so, generate an IRQ by software.  This is
 		 * horribly racy, but it's the best we can do to work around
 		 * this silicon bug. */
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-			defined(CONFIG_ARCH_OMAP4)
-		l = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN);
-#endif
 		l ^= bank->saved_datain;
 		l &= bank->non_wakeup_gpios;
 		if (l) {
 			u32 old0, old1;
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-			defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 			old0 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0);
 			old1 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1);
 			__raw_writel(old0 | l, bank->base + OMAP24XX_GPIO_LEVELDETECT0);
 			__raw_writel(old1 | l, bank->base + OMAP24XX_GPIO_LEVELDETECT1);
 			__raw_writel(old0, bank->base + OMAP24XX_GPIO_LEVELDETECT0);
 			__raw_writel(old1, bank->base + OMAP24XX_GPIO_LEVELDETECT1);
+#endif
+#ifdef CONFIG_ARCH_OMAP4
+			old0 = __raw_readl(bank->base +
+						OMAP4_GPIO_LEVELDETECT0);
+			old1 = __raw_readl(bank->base +
+						OMAP4_GPIO_LEVELDETECT1);
+			__raw_writel(old0 | l, bank->base +
+						OMAP4_GPIO_LEVELDETECT0);
+			__raw_writel(old1 | l, bank->base +
+						OMAP4_GPIO_LEVELDETECT1);
+			__raw_writel(old0, bank->base +
+						OMAP4_GPIO_LEVELDETECT0);
+			__raw_writel(old1, bank->base +
+						OMAP4_GPIO_LEVELDETECT1);
 #endif
 		}
 	}
-- 
cgit v1.2.3


From ef12379f205bed7e92434e12ddd44e62d13bebe1 Mon Sep 17 00:00:00 2001
From: Hartley Sweeten <hartleys@visionengravers.com>
Date: Wed, 29 Jul 2009 22:41:06 +0100
Subject: ARM: 5628/1: ep93xx: Introduce Pulse Width Modulator (PWM) driver

The EP93xx features two PWMs (one on the EP9307) with the following
features:

  * Configurable dual output
  * Separate input clocks for each PWM output
  * 16-bit resolution
  * Programmable pulse width (duty cycle), interval (frequency), and
    polarity

This adds the necessary core support as well as the driver.  A sysfs
interface is provided to control the PWM outputs.

Signed-off-by: Matthieu Crapet <mcrapet@gmail.com>
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ep93xx/clock.c                    |  4 ++
 arch/arm/mach-ep93xx/core.c                     | 85 +++++++++++++++++++++++++
 arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h |  1 +
 arch/arm/mach-ep93xx/include/mach/platform.h    |  4 ++
 4 files changed, 94 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
index b6b53447b1b..3dd0e2a2309 100644
--- a/arch/arm/mach-ep93xx/clock.c
+++ b/arch/arm/mach-ep93xx/clock.c
@@ -72,6 +72,9 @@ static struct clk clk_keypad = {
 	.enable_mask	= EP93XX_SYSCON_KEYTCHCLKDIV_KEN,
 	.set_rate	= set_keytchclk_rate,
 };
+static struct clk clk_pwm = {
+	.rate		= EP93XX_EXT_CLK_RATE,
+};
 
 /* DMA Clocks */
 static struct clk clk_m2p0 = {
@@ -137,6 +140,7 @@ static struct clk_lookup clocks[] = {
 	INIT_CK(NULL,			"pll2",		&clk_pll2),
 	INIT_CK("ep93xx-ohci",		NULL,		&clk_usb_host),
 	INIT_CK("ep93xx-keypad",	NULL,		&clk_keypad),
+	INIT_CK(NULL,			"pwm_clk",	&clk_pwm),
 	INIT_CK(NULL,			"m2p0",		&clk_m2p0),
 	INIT_CK(NULL,			"m2p1",		&clk_m2p1),
 	INIT_CK(NULL,			"m2p2",		&clk_m2p2),
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 2b58df0184c..40755298fa3 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -597,6 +597,91 @@ static struct platform_device ep93xx_leds = {
 };
 
 
+/*************************************************************************
+ * EP93xx pwm peripheral handling
+ *************************************************************************/
+static struct resource ep93xx_pwm0_resource[] = {
+	{
+		.start	= EP93XX_PWM_PHYS_BASE,
+		.end	= EP93XX_PWM_PHYS_BASE + 0x10 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device ep93xx_pwm0_device = {
+	.name		= "ep93xx-pwm",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(ep93xx_pwm0_resource),
+	.resource	= ep93xx_pwm0_resource,
+};
+
+static struct resource ep93xx_pwm1_resource[] = {
+	{
+		.start	= EP93XX_PWM_PHYS_BASE + 0x20,
+		.end	= EP93XX_PWM_PHYS_BASE + 0x30 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device ep93xx_pwm1_device = {
+	.name		= "ep93xx-pwm",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(ep93xx_pwm1_resource),
+	.resource	= ep93xx_pwm1_resource,
+};
+
+void __init ep93xx_register_pwm(int pwm0, int pwm1)
+{
+	if (pwm0)
+		platform_device_register(&ep93xx_pwm0_device);
+
+	/* NOTE: EP9307 does not have PWMOUT1 (pin EGPIO14) */
+	if (pwm1)
+		platform_device_register(&ep93xx_pwm1_device);
+}
+
+int ep93xx_pwm_acquire_gpio(struct platform_device *pdev)
+{
+	int err;
+
+	if (pdev->id == 0) {
+		err = 0;
+	} else if (pdev->id == 1) {
+		err = gpio_request(EP93XX_GPIO_LINE_EGPIO14,
+				   dev_name(&pdev->dev));
+		if (err)
+			return err;
+		err = gpio_direction_output(EP93XX_GPIO_LINE_EGPIO14, 0);
+		if (err)
+			goto fail;
+
+		/* PWM 1 output on EGPIO[14] */
+		ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_PONG);
+	} else {
+		err = -ENODEV;
+	}
+
+	return err;
+
+fail:
+	gpio_free(EP93XX_GPIO_LINE_EGPIO14);
+	return err;
+}
+EXPORT_SYMBOL(ep93xx_pwm_acquire_gpio);
+
+void ep93xx_pwm_release_gpio(struct platform_device *pdev)
+{
+	if (pdev->id == 1) {
+		gpio_direction_input(EP93XX_GPIO_LINE_EGPIO14);
+		gpio_free(EP93XX_GPIO_LINE_EGPIO14);
+
+		/* EGPIO[14] used for GPIO */
+		ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_PONG);
+	}
+}
+EXPORT_SYMBOL(ep93xx_pwm_release_gpio);
+
+
 extern void ep93xx_gpio_init(void);
 
 void __init ep93xx_init_devices(void)
diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
index a11ae779baa..ea78e908fc8 100644
--- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
+++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
@@ -147,6 +147,7 @@
 #define EP93XX_ADC_BASE			EP93XX_APB_IOMEM(0x00100000)
 #define EP93XX_TOUCHSCREEN_BASE		EP93XX_APB_IOMEM(0x00100000)
 
+#define EP93XX_PWM_PHYS_BASE		(EP93XX_APB_PHYS_BASE + 0x00110000)
 #define EP93XX_PWM_BASE			EP93XX_APB_IOMEM(0x00110000)
 
 #define EP93XX_RTC_PHYS_BASE		(EP93XX_APB_PHYS_BASE + 0x00120000)
diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h
index 0af0a3ba704..5f5fa6574d3 100644
--- a/arch/arm/mach-ep93xx/include/mach/platform.h
+++ b/arch/arm/mach-ep93xx/include/mach/platform.h
@@ -5,6 +5,7 @@
 #ifndef __ASSEMBLY__
 
 struct i2c_board_info;
+struct platform_device;
 
 struct ep93xx_eth_data
 {
@@ -32,6 +33,9 @@ static inline void ep93xx_devcfg_clear_bits(unsigned int bits)
 
 void ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr);
 void ep93xx_register_i2c(struct i2c_board_info *devices, int num);
+void ep93xx_register_pwm(int pwm0, int pwm1);
+int ep93xx_pwm_acquire_gpio(struct platform_device *pdev);
+void ep93xx_pwm_release_gpio(struct platform_device *pdev);
 
 void ep93xx_init_devices(void);
 extern struct sys_timer ep93xx_timer;
-- 
cgit v1.2.3


From 41a353d126ca332c20cfd97683b6261992743840 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Eric=20B=C3=A9nard?= <eric@eukrea.com>
Date: Thu, 30 Jul 2009 07:20:03 +0100
Subject: ARM: 5629/1: Add support for Eukrea's CPU9260 & CPU9G20

CPU9260 and CPU9G20 share the same PCB populated with either
Atmel's AT91SAM9260B or AT91SAM9G20B with up to 64MB Strataflash,
up to 128MB SDRAM, up to 2GB NAND and an ethernet PHY in RMII mode.

Signed-off-by: Eric Benard <eric@eukrea.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/configs/cpu9260_defconfig  | 1338 +++++++++++++++++++++++++++++++++++
 arch/arm/configs/cpu9g20_defconfig  | 1328 ++++++++++++++++++++++++++++++++++
 arch/arm/mach-at91/Kconfig          |   14 +
 arch/arm/mach-at91/Makefile         |    2 +
 arch/arm/mach-at91/board-cpu9krea.c |  385 ++++++++++
 5 files changed, 3067 insertions(+)
 create mode 100644 arch/arm/configs/cpu9260_defconfig
 create mode 100644 arch/arm/configs/cpu9g20_defconfig
 create mode 100644 arch/arm/mach-at91/board-cpu9krea.c

(limited to 'arch')

diff --git a/arch/arm/configs/cpu9260_defconfig b/arch/arm/configs/cpu9260_defconfig
new file mode 100644
index 00000000000..601e7f3d5e9
--- /dev/null
+++ b/arch/arm/configs/cpu9260_defconfig
@@ -0,0 +1,1338 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.31-rc3
+# Tue Jul 14 14:57:55 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Performance Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Atmel AT91 System-on-Chip
+#
+# CONFIG_ARCH_AT91RM9200 is not set
+CONFIG_ARCH_AT91SAM9260=y
+# CONFIG_ARCH_AT91SAM9261 is not set
+# CONFIG_ARCH_AT91SAM9263 is not set
+# CONFIG_ARCH_AT91SAM9RL is not set
+# CONFIG_ARCH_AT91SAM9G20 is not set
+# CONFIG_ARCH_AT91CAP9 is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
+
+#
+# AT91SAM9260 Variants
+#
+# CONFIG_ARCH_AT91SAM9260_SAM9XE is not set
+
+#
+# AT91SAM9260 / AT91SAM9XE Board Type
+#
+# CONFIG_MACH_AT91SAM9260EK is not set
+# CONFIG_MACH_CAM60 is not set
+# CONFIG_MACH_SAM9_L9260 is not set
+# CONFIG_MACH_AFEB9260 is not set
+# CONFIG_MACH_USB_A9260 is not set
+# CONFIG_MACH_QIL_A9260 is not set
+CONFIG_MACH_CPU9260=y
+
+#
+# AT91 Board Options
+#
+
+#
+# AT91 Feature Selections
+#
+# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
+CONFIG_AT91_TIMER_HZ=100
+CONFIG_AT91_EARLY_DBGU=y
+# CONFIG_AT91_EARLY_USART0 is not set
+# CONFIG_AT91_EARLY_USART1 is not set
+# CONFIG_AT91_EARLY_USART2 is not set
+# CONFIG_AT91_EARLY_USART3 is not set
+# CONFIG_AT91_EARLY_USART4 is not set
+# CONFIG_AT91_EARLY_USART5 is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+CONFIG_MTD_PLATRAM=y
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_NAND_ATMEL_ECC_HW=y
+# CONFIG_MTD_NAND_ATMEL_ECC_SOFT is not set
+# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=y
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_MACB=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=y
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=y
+CONFIG_PPP_BSDCOMP=y
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=32
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+CONFIG_I2C_GPIO=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_AT91SAM9X_WATCHDOG=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+CONFIG_USB_GADGET_AT91=y
+CONFIG_USB_AT91=y
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_AT91=y
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_HCTOSYS is not set
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=y
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_AT91SAM9 is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/cpu9g20_defconfig b/arch/arm/configs/cpu9g20_defconfig
new file mode 100644
index 00000000000..b5b9cbbc697
--- /dev/null
+++ b/arch/arm/configs/cpu9g20_defconfig
@@ -0,0 +1,1328 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.31-rc3
+# Tue Jul 14 15:03:43 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Performance Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Atmel AT91 System-on-Chip
+#
+# CONFIG_ARCH_AT91RM9200 is not set
+# CONFIG_ARCH_AT91SAM9260 is not set
+# CONFIG_ARCH_AT91SAM9261 is not set
+# CONFIG_ARCH_AT91SAM9263 is not set
+# CONFIG_ARCH_AT91SAM9RL is not set
+CONFIG_ARCH_AT91SAM9G20=y
+# CONFIG_ARCH_AT91CAP9 is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
+
+#
+# AT91SAM9G20 Board Type
+#
+# CONFIG_MACH_AT91SAM9G20EK is not set
+CONFIG_MACH_CPU9G20=y
+
+#
+# AT91 Board Options
+#
+
+#
+# AT91 Feature Selections
+#
+# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
+CONFIG_AT91_TIMER_HZ=100
+CONFIG_AT91_EARLY_DBGU=y
+# CONFIG_AT91_EARLY_USART0 is not set
+# CONFIG_AT91_EARLY_USART1 is not set
+# CONFIG_AT91_EARLY_USART2 is not set
+# CONFIG_AT91_EARLY_USART3 is not set
+# CONFIG_AT91_EARLY_USART4 is not set
+# CONFIG_AT91_EARLY_USART5 is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+CONFIG_MTD_PLATRAM=y
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_ATMEL=y
+# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
+CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
+# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=y
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_MACB=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=y
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=y
+CONFIG_PPP_BSDCOMP=y
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=32
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+CONFIG_I2C_GPIO=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_AT91SAM9X_WATCHDOG=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+CONFIG_USB_GADGET_AT91=y
+CONFIG_USB_AT91=y
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_AT91=y
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_HCTOSYS is not set
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=y
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_AT91SAM9 is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 8f3e15abdb6..83a89720ada 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -217,6 +217,13 @@ config MACH_QIL_A9260
 	  Select this if you are using a Calao Systems QIL-A9260 Board.
 	  <http://www.calao-systems.com>
 
+config MACH_CPU9260
+	bool "Eukrea CPU9260 board"
+	depends on ARCH_AT91SAM9260
+	help
+	  Select this if you are using a Eukrea Electromatique's
+	  CPU9260 Board <http://www.eukrea.com/>
+
 endif
 
 # ----------------------------------------------------------
@@ -303,6 +310,13 @@ config MACH_AT91SAM9G20EK
 	help
 	  Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit.
 
+config MACH_CPU9G20
+	bool "Eukrea CPU9G20 board"
+	depends on ARCH_AT91SAM9G20
+	help
+	  Select this if you are using a Eukrea Electromatique's
+	  CPU9G20 Board <http://www.eukrea.com/>
+
 endif
 
 # ----------------------------------------------------------
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 4eaf80abe10..b2ea2e5a881 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -42,6 +42,7 @@ obj-$(CONFIG_MACH_SAM9_L9260)	+= board-sam9-l9260.o
 obj-$(CONFIG_MACH_USB_A9260)	+= board-usb-a9260.o
 obj-$(CONFIG_MACH_QIL_A9260)	+= board-qil-a9260.o
 obj-$(CONFIG_MACH_AFEB9260)	+= board-afeb-9260v1.o
+obj-$(CONFIG_MACH_CPU9260)	+= board-cpu9krea.o
 
 # AT91SAM9261 board-specific support
 obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o
@@ -57,6 +58,7 @@ obj-$(CONFIG_MACH_AT91SAM9RLEK)	+= board-sam9rlek.o
 
 # AT91SAM9G20 board-specific support
 obj-$(CONFIG_MACH_AT91SAM9G20EK) += board-sam9g20ek.o
+obj-$(CONFIG_MACH_CPU9G20)	+= board-cpu9krea.o
 
 # AT91SAM9G45 board-specific support
 obj-$(CONFIG_MACH_AT91SAM9G45EKES) += board-sam9m10g45ek.o
diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c
new file mode 100644
index 00000000000..4bc2e9f6ebb
--- /dev/null
+++ b/arch/arm/mach-at91/board-cpu9krea.c
@@ -0,0 +1,385 @@
+/*
+ * linux/arch/arm/mach-at91/board-cpu9krea.c
+ *
+ *  Copyright (C) 2005 SAN People
+ *  Copyright (C) 2006 Atmel
+ *  Copyright (C) 2009 Eric Benard - eric@eukrea.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91sam9_smc.h>
+#include <mach/at91sam9260_matrix.h>
+
+#include "sam9_smc.h"
+#include "generic.h"
+
+static void __init cpu9krea_map_io(void)
+{
+	/* Initialize processor: 18.432 MHz crystal */
+	at91sam9260_initialize(18432000);
+
+	/* DGBU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS |
+		ATMEL_UART_RTS | ATMEL_UART_DTR | ATMEL_UART_DSR |
+		ATMEL_UART_DCD | ATMEL_UART_RI);
+
+	/* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
+	at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS |
+		ATMEL_UART_RTS);
+
+	/* USART2 on ttyS3. (Rx, Tx, RTS, CTS) */
+	at91_register_uart(AT91SAM9260_ID_US2, 3, ATMEL_UART_CTS |
+		ATMEL_UART_RTS);
+
+	/* USART3 on ttyS4. (Rx, Tx) */
+	at91_register_uart(AT91SAM9260_ID_US3, 4, 0);
+
+	/* USART4 on ttyS5. (Rx, Tx) */
+	at91_register_uart(AT91SAM9260_ID_US4, 5, 0);
+
+	/* USART5 on ttyS6. (Rx, Tx) */
+	at91_register_uart(AT91SAM9260_ID_US5, 6, 0);
+
+	/* set serial console to ttyS0 (ie, DBGU) */
+	at91_set_serial_console(0);
+}
+
+static void __init cpu9krea_init_irq(void)
+{
+	at91sam9260_init_interrupts(NULL);
+}
+
+/*
+ * USB Host port
+ */
+static struct at91_usbh_data __initdata cpu9krea_usbh_data = {
+	.ports		= 2,
+};
+
+/*
+ * USB Device port
+ */
+static struct at91_udc_data __initdata cpu9krea_udc_data = {
+	.vbus_pin	= AT91_PIN_PC8,
+	.pullup_pin	= 0,		/* pull-up driven by UDC */
+};
+
+/*
+ * MACB Ethernet device
+ */
+static struct at91_eth_data __initdata cpu9krea_macb_data = {
+	.is_rmii	= 1,
+};
+
+/*
+ * NAND flash
+ */
+static struct atmel_nand_data __initdata cpu9krea_nand_data = {
+	.ale		= 21,
+	.cle		= 22,
+	.rdy_pin	= AT91_PIN_PC13,
+	.enable_pin	= AT91_PIN_PC14,
+	.bus_width_16	= 0,
+};
+
+#ifdef CONFIG_MACH_CPU9260
+static struct sam9_smc_config __initdata cpu9krea_nand_smc_config = {
+	.ncs_read_setup		= 0,
+	.nrd_setup		= 1,
+	.ncs_write_setup	= 0,
+	.nwe_setup		= 1,
+
+	.ncs_read_pulse		= 3,
+	.nrd_pulse		= 3,
+	.ncs_write_pulse	= 3,
+	.nwe_pulse		= 3,
+
+	.read_cycle		= 5,
+	.write_cycle		= 5,
+
+	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE
+		| AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
+	.tdf_cycles		= 2,
+};
+#else
+static struct sam9_smc_config __initdata cpu9krea_nand_smc_config = {
+	.ncs_read_setup		= 0,
+	.nrd_setup		= 2,
+	.ncs_write_setup	= 0,
+	.nwe_setup		= 2,
+
+	.ncs_read_pulse		= 4,
+	.nrd_pulse		= 4,
+	.ncs_write_pulse	= 4,
+	.nwe_pulse		= 4,
+
+	.read_cycle		= 7,
+	.write_cycle		= 7,
+
+	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE
+		| AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
+	.tdf_cycles		= 3,
+};
+#endif
+
+static void __init cpu9krea_add_device_nand(void)
+{
+	sam9_smc_configure(3, &cpu9krea_nand_smc_config);
+	at91_add_device_nand(&cpu9krea_nand_data);
+}
+
+/*
+ * NOR flash
+ */
+static struct physmap_flash_data cpuat9260_nor_data = {
+	.width		= 2,
+};
+
+#define NOR_BASE	AT91_CHIPSELECT_0
+#define NOR_SIZE	SZ_64M
+
+static struct resource nor_flash_resources[] = {
+	{
+		.start	= NOR_BASE,
+		.end	= NOR_BASE + NOR_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device cpu9krea_nor_flash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &cpuat9260_nor_data,
+	},
+	.resource	= nor_flash_resources,
+	.num_resources	= ARRAY_SIZE(nor_flash_resources),
+};
+
+#ifdef CONFIG_MACH_CPU9260
+static struct sam9_smc_config __initdata cpu9krea_nor_smc_config = {
+	.ncs_read_setup		= 0,
+	.nrd_setup		= 1,
+	.ncs_write_setup	= 0,
+	.nwe_setup		= 1,
+
+	.ncs_read_pulse		= 10,
+	.nrd_pulse		= 10,
+	.ncs_write_pulse	= 6,
+	.nwe_pulse		= 6,
+
+	.read_cycle		= 12,
+	.write_cycle		= 8,
+
+	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE
+			| AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE
+			| AT91_SMC_DBW_16,
+	.tdf_cycles		= 2,
+};
+#else
+static struct sam9_smc_config __initdata cpu9krea_nor_smc_config = {
+	.ncs_read_setup		= 0,
+	.nrd_setup		= 1,
+	.ncs_write_setup	= 0,
+	.nwe_setup		= 1,
+
+	.ncs_read_pulse		= 13,
+	.nrd_pulse		= 13,
+	.ncs_write_pulse	= 8,
+	.nwe_pulse		= 8,
+
+	.read_cycle		= 15,
+	.write_cycle		= 10,
+
+	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE
+			| AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE
+			| AT91_SMC_DBW_16,
+	.tdf_cycles		= 2,
+};
+#endif
+
+static __init void cpu9krea_add_device_nor(void)
+{
+	unsigned long csa;
+
+	csa = at91_sys_read(AT91_MATRIX_EBICSA);
+	at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_VDDIOMSEL_3_3V);
+
+	/* configure chip-select 0 (NOR) */
+	sam9_smc_configure(0, &cpu9krea_nor_smc_config);
+
+	platform_device_register(&cpu9krea_nor_flash);
+}
+
+/*
+ * LEDs
+ */
+static struct gpio_led cpu9krea_leds[] = {
+	{	/* LED1 */
+		.name			= "LED1",
+		.gpio			= AT91_PIN_PC11,
+		.active_low		= 1,
+		.default_trigger	= "timer",
+	},
+	{	/* LED2 */
+		.name			= "LED2",
+		.gpio			= AT91_PIN_PC12,
+		.active_low		= 1,
+		.default_trigger	= "heartbeat",
+	},
+	{	/* LED3 */
+		.name			= "LED3",
+		.gpio			= AT91_PIN_PC7,
+		.active_low		= 1,
+		.default_trigger	= "none",
+	},
+	{	/* LED4 */
+		.name			= "LED4",
+		.gpio			= AT91_PIN_PC9,
+		.active_low		= 1,
+		.default_trigger	= "none",
+	}
+};
+
+static struct i2c_board_info __initdata cpu9krea_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("rtc-ds1307", 0x68),
+		.type	= "ds1339",
+	},
+};
+
+/*
+ * GPIO Buttons
+ */
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button cpu9krea_buttons[] = {
+	{
+		.gpio		= AT91_PIN_PC3,
+		.code		= BTN_0,
+		.desc		= "BP1",
+		.active_low	= 1,
+		.wakeup		= 1,
+	},
+	{
+		.gpio		= AT91_PIN_PB20,
+		.code		= BTN_1,
+		.desc		= "BP2",
+		.active_low	= 1,
+		.wakeup		= 1,
+	}
+};
+
+static struct gpio_keys_platform_data cpu9krea_button_data = {
+	.buttons	= cpu9krea_buttons,
+	.nbuttons	= ARRAY_SIZE(cpu9krea_buttons),
+};
+
+static struct platform_device cpu9krea_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &cpu9krea_button_data,
+	}
+};
+
+static void __init cpu9krea_add_device_buttons(void)
+{
+	at91_set_gpio_input(AT91_PIN_PC3, 1);	/* BP1 */
+	at91_set_deglitch(AT91_PIN_PC3, 1);
+	at91_set_gpio_input(AT91_PIN_PB20, 1);	/* BP2 */
+	at91_set_deglitch(AT91_PIN_PB20, 1);
+
+	platform_device_register(&cpu9krea_button_device);
+}
+#else
+static void __init cpu9krea_add_device_buttons(void)
+{
+}
+#endif
+
+/*
+ * MCI (SD/MMC)
+ */
+static struct at91_mmc_data __initdata cpu9krea_mmc_data = {
+	.slot_b		= 0,
+	.wire4		= 1,
+	.det_pin	= AT91_PIN_PA29,
+};
+
+static void __init cpu9krea_board_init(void)
+{
+	/* NOR */
+	cpu9krea_add_device_nor();
+	/* Serial */
+	at91_add_device_serial();
+	/* USB Host */
+	at91_add_device_usbh(&cpu9krea_usbh_data);
+	/* USB Device */
+	at91_add_device_udc(&cpu9krea_udc_data);
+	/* NAND */
+	cpu9krea_add_device_nand();
+	/* Ethernet */
+	at91_add_device_eth(&cpu9krea_macb_data);
+	/* MMC */
+	at91_add_device_mmc(0, &cpu9krea_mmc_data);
+	/* I2C */
+	at91_add_device_i2c(cpu9krea_i2c_devices,
+		ARRAY_SIZE(cpu9krea_i2c_devices));
+	/* LEDs */
+	at91_gpio_leds(cpu9krea_leds, ARRAY_SIZE(cpu9krea_leds));
+	/* Push Buttons */
+	cpu9krea_add_device_buttons();
+}
+
+#ifdef CONFIG_MACH_CPU9260
+MACHINE_START(CPUAT9260, "Eukrea CPU9260")
+#else
+MACHINE_START(CPUAT9G20, "Eukrea CPU9G20")
+#endif
+	/* Maintainer: Eric Benard - EUKREA Electromatique */
+	.phys_io	= AT91_BASE_SYS,
+	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+	.boot_params	= AT91_SDRAM_BASE + 0x100,
+	.timer		= &at91sam926x_timer,
+	.map_io		= cpu9krea_map_io,
+	.init_irq	= cpu9krea_init_irq,
+	.init_machine	= cpu9krea_board_init,
+MACHINE_END
-- 
cgit v1.2.3


From 10233a939812450e4fe07cf529585bab5b4d99ec Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Eric=20B=C3=A9nard?= <eric@eukrea.com>
Date: Thu, 30 Jul 2009 07:23:42 +0100
Subject: ARM: 5630/1: Add support for Eukrea's CPUAT91

CPUAT91 is based on Atmel's AT91RM9200 with up to 16MB Strataflash,
up to 128MB SDRAM and an ethernet PHY in RMII mode.

Signed-off-by: Eric Benard <ebenard@eukrea.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/configs/cpuat91_defconfig | 1316 ++++++++++++++++++++++++++++++++++++
 arch/arm/mach-at91/Kconfig         |    7 +
 arch/arm/mach-at91/Makefile        |    1 +
 arch/arm/mach-at91/board-cpuat91.c |  185 +++++
 4 files changed, 1509 insertions(+)
 create mode 100644 arch/arm/configs/cpuat91_defconfig
 create mode 100644 arch/arm/mach-at91/board-cpuat91.c

(limited to 'arch')

diff --git a/arch/arm/configs/cpuat91_defconfig b/arch/arm/configs/cpuat91_defconfig
new file mode 100644
index 00000000000..4901827253f
--- /dev/null
+++ b/arch/arm/configs/cpuat91_defconfig
@@ -0,0 +1,1316 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.31-rc3
+# Tue Jul 14 14:45:01 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Performance Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Atmel AT91 System-on-Chip
+#
+CONFIG_ARCH_AT91RM9200=y
+# CONFIG_ARCH_AT91SAM9260 is not set
+# CONFIG_ARCH_AT91SAM9261 is not set
+# CONFIG_ARCH_AT91SAM9263 is not set
+# CONFIG_ARCH_AT91SAM9RL is not set
+# CONFIG_ARCH_AT91SAM9G20 is not set
+# CONFIG_ARCH_AT91CAP9 is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
+
+#
+# AT91RM9200 Board Type
+#
+# CONFIG_MACH_ONEARM is not set
+# CONFIG_ARCH_AT91RM9200DK is not set
+# CONFIG_MACH_AT91RM9200EK is not set
+# CONFIG_MACH_CSB337 is not set
+# CONFIG_MACH_CSB637 is not set
+# CONFIG_MACH_CARMEVA is not set
+# CONFIG_MACH_ATEB9200 is not set
+# CONFIG_MACH_KB9200 is not set
+# CONFIG_MACH_PICOTUX2XX is not set
+# CONFIG_MACH_KAFA is not set
+# CONFIG_MACH_ECBAT91 is not set
+# CONFIG_MACH_YL9200 is not set
+CONFIG_MACH_CPUAT91=y
+
+#
+# AT91 Board Options
+#
+
+#
+# AT91 Feature Selections
+#
+# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
+CONFIG_AT91_TIMER_HZ=100
+CONFIG_AT91_EARLY_DBGU=y
+# CONFIG_AT91_EARLY_USART0 is not set
+# CONFIG_AT91_EARLY_USART1 is not set
+# CONFIG_AT91_EARLY_USART2 is not set
+# CONFIG_AT91_EARLY_USART3 is not set
+# CONFIG_AT91_EARLY_USART4 is not set
+# CONFIG_AT91_EARLY_USART5 is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM920T=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+CONFIG_MTD_PLATRAM=y
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=y
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_ARM_AT91_ETHER=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=y
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=y
+CONFIG_PPP_BSDCOMP=y
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=32
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+CONFIG_I2C_GPIO=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_AT91RM9200_WATCHDOG=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+CONFIG_USB_GADGET_AT91=y
+CONFIG_USB_AT91=y
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_AT91=y
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_HCTOSYS is not set
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=y
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+CONFIG_RTC_DRV_PCF8563=y
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_AT91RM9200 is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_FRAME_POINTER=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 83a89720ada..a24d824c428 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -156,6 +156,13 @@ config MACH_YL9200
 	help
 	  Select this if you are using the ucDragon YL-9200 board.
 
+config MACH_CPUAT91
+	bool "Eukrea CPUAT91"
+	depends on ARCH_AT91RM9200
+	help
+	  Select this if you are using the Eukrea Electromatique's
+	  CPUAT91 board <http://www.eukrea.com/>.
+
 endif
 
 # ----------------------------------------------------------
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index b2ea2e5a881..a6ed015d82e 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -34,6 +34,7 @@ obj-$(CONFIG_MACH_KAFA)		+= board-kafa.o
 obj-$(CONFIG_MACH_PICOTUX2XX)	+= board-picotux200.o
 obj-$(CONFIG_MACH_ECBAT91)	+= board-ecbat91.o
 obj-$(CONFIG_MACH_YL9200)	+= board-yl-9200.o
+obj-$(CONFIG_MACH_CPUAT91)	+= board-cpuat91.o
 
 # AT91SAM9260 board-specific support
 obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o
diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c
new file mode 100644
index 00000000000..a28d9965619
--- /dev/null
+++ b/arch/arm/mach-at91/board-cpuat91.c
@@ -0,0 +1,185 @@
+/*
+ * linux/arch/arm/mach-at91/board-cpuat91.c
+ *
+ *  Copyright (C) 2009 Eric Benard - eric@eukrea.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/plat-ram.h>
+
+#include <mach/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91rm9200_mc.h>
+
+#include "generic.h"
+
+static struct gpio_led cpuat91_leds[] = {
+	{
+		.name			= "led1",
+		.default_trigger	= "heartbeat",
+		.active_low		= 1,
+		.gpio			= AT91_PIN_PC0,
+	},
+};
+
+static void __init cpuat91_map_io(void)
+{
+	/* Initialize processor: 18.432 MHz crystal */
+	at91rm9200_initialize(18432000, AT91RM9200_PQFP);
+
+	/* DBGU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS) */
+	at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS |
+		ATMEL_UART_RTS);
+
+	/* USART1 on ttyS2. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+	at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS |
+		ATMEL_UART_RTS | ATMEL_UART_DTR | ATMEL_UART_DSR |
+		ATMEL_UART_DCD | ATMEL_UART_RI);
+
+	/* USART2 on ttyS3 (Rx, Tx) */
+	at91_register_uart(AT91RM9200_ID_US2, 3, 0);
+
+	/* USART3 on ttyS4 (Rx, Tx, CTS, RTS) */
+	at91_register_uart(AT91RM9200_ID_US3, 4, ATMEL_UART_CTS |
+		ATMEL_UART_RTS);
+
+	/* set serial console to ttyS0 (ie, DBGU) */
+	at91_set_serial_console(0);
+}
+
+static void __init cpuat91_init_irq(void)
+{
+	at91rm9200_init_interrupts(NULL);
+}
+
+static struct at91_eth_data __initdata cpuat91_eth_data = {
+	.is_rmii	= 1,
+};
+
+static struct at91_usbh_data __initdata cpuat91_usbh_data = {
+	.ports		= 1,
+};
+
+static struct at91_udc_data __initdata cpuat91_udc_data = {
+	.vbus_pin	= AT91_PIN_PC15,
+	.pullup_pin	= AT91_PIN_PC14,
+};
+
+static struct at91_mmc_data __initdata cpuat91_mmc_data = {
+	.det_pin	= AT91_PIN_PC2,
+	.wire4		= 1,
+};
+
+static struct physmap_flash_data cpuat91_flash_data = {
+	.width		= 2,
+};
+
+static struct resource cpuat91_flash_resource = {
+	.start		= AT91_CHIPSELECT_0,
+	.end		= AT91_CHIPSELECT_0 + SZ_16M - 1,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device cpuat91_norflash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev	= {
+		.platform_data	= &cpuat91_flash_data,
+	},
+	.resource	= &cpuat91_flash_resource,
+	.num_resources	= 1,
+};
+
+#ifdef CONFIG_MTD_PLATRAM
+struct platdata_mtd_ram at91_sram_pdata = {
+	.mapname	= "SRAM",
+	.bankwidth	= 2,
+};
+
+static struct resource at91_sram_resource[] = {
+	[0] = {
+		.start = AT91RM9200_SRAM_BASE,
+		.end   = AT91RM9200_SRAM_BASE + AT91RM9200_SRAM_SIZE - 1,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device at91_sram = {
+	.name		= "mtd-ram",
+	.id		= 0,
+	.resource	= at91_sram_resource,
+	.num_resources	= ARRAY_SIZE(at91_sram_resource),
+	.dev	= {
+		.platform_data = &at91_sram_pdata,
+	},
+};
+#endif /* MTD_PLATRAM */
+
+static struct platform_device *platform_devices[] __initdata = {
+	&cpuat91_norflash,
+#ifdef CONFIG_MTD_PLATRAM
+	&at91_sram,
+#endif /* CONFIG_MTD_PLATRAM */
+};
+
+static void __init cpuat91_board_init(void)
+{
+	/* Serial */
+	at91_add_device_serial();
+	/* LEDs. */
+	at91_gpio_leds(cpuat91_leds, ARRAY_SIZE(cpuat91_leds));
+	/* Ethernet */
+	at91_add_device_eth(&cpuat91_eth_data);
+	/* USB Host */
+	at91_add_device_usbh(&cpuat91_usbh_data);
+	/* USB Device */
+	at91_add_device_udc(&cpuat91_udc_data);
+	/* MMC */
+	at91_add_device_mmc(0, &cpuat91_mmc_data);
+	/* I2C */
+	at91_add_device_i2c(NULL, 0);
+	/* Platform devices */
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
+
+MACHINE_START(CPUAT91, "Eukrea")
+	/* Maintainer: Eric Benard - EUKREA Electromatique */
+	.phys_io	= AT91_BASE_SYS,
+	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+	.boot_params	= AT91_SDRAM_BASE + 0x100,
+	.timer		= &at91rm9200_timer,
+	.map_io		= cpuat91_map_io,
+	.init_irq	= cpuat91_init_irq,
+	.init_machine	= cpuat91_board_init,
+MACHINE_END
-- 
cgit v1.2.3


From b0e66522f4d86713b0450255210e26c4f11ee86b Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:20 +0100
Subject: ARM: S3C24XX: Add BWSCON per-bank information.

Add definitions and an accessor macro to deal with
reading bus information from S3C2410_BWSCON for any
given numbered bank.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2410/include/mach/regs-mem.h | 10 ++++++++++
 1 file changed, 10 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-s3c2410/include/mach/regs-mem.h b/arch/arm/mach-s3c2410/include/mach/regs-mem.h
index 57759804e2f..7f7c5294796 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-mem.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-mem.h
@@ -73,6 +73,16 @@
 #define S3C2410_BWSCON_WS7		(1<<30)
 #define S3C2410_BWSCON_ST7		(1<<31)
 
+/* accesor functions for getting BANK(n) configuration. (n != 0) */
+
+#define S3C2410_BWSCON_GET(_bwscon, _bank) (((_bwscon) >> ((_bank) * 4)) & 0xf)
+
+#define S3C2410_BWSCON_DW8		(0)
+#define S3C2410_BWSCON_DW16		(1)
+#define S3C2410_BWSCON_DW32		(2)
+#define S3C2410_BWSCON_WS		(1 << 2)
+#define S3C2410_BWSCON_ST		(1 << 3)
+
 /* memory set (rom, ram) */
 #define S3C2410_BANKCON0		S3C2410_MEMREG(0x0004)
 #define S3C2410_BANKCON1		S3C2410_MEMREG(0x0008)
-- 
cgit v1.2.3


From 2e4ea6e8209e0c1d93c69c34c32002337b3f747e Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:21 +0100
Subject: ARM: S3C24XX: CPUFREQ: Add core support.

Add the core of the support for enabling the CPUFreq driver on
all S3C24XX based systems.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c24xx/Makefile                     |   2 +
 arch/arm/plat-s3c24xx/cpu-freq.c                   | 704 +++++++++++++++++++++
 arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h | 183 ++++++
 3 files changed, 889 insertions(+)
 create mode 100644 arch/arm/plat-s3c24xx/cpu-freq.c
 create mode 100644 arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h

(limited to 'arch')

diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index 579a165c282..1f6add552bd 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -20,6 +20,8 @@ obj-y				+= gpiolib.o
 obj-y				+= clock.o
 obj-$(CONFIG_S3C24XX_DCLK)	+= clock-dclk.o
 
+obj-$(CONFIG_CPU_FREQ_S3C24XX)	+= cpu-freq.o
+
 # Architecture dependant builds
 
 obj-$(CONFIG_CPU_S3C244X)	+= s3c244x.o
diff --git a/arch/arm/plat-s3c24xx/cpu-freq.c b/arch/arm/plat-s3c24xx/cpu-freq.c
new file mode 100644
index 00000000000..40ff7e2569d
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/cpu-freq.c
@@ -0,0 +1,704 @@
+/* linux/arch/arm/plat-s3c24xx/cpu-freq.c
+ *
+ * Copyright (c) 2006,2007,2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX CPU Frequency scaling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/cpufreq.h>
+#include <linux/cpu.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+#include <linux/kobject.h>
+#include <linux/sysfs.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <plat/cpu.h>
+#include <plat/clock.h>
+#include <plat/cpu-freq-core.h>
+
+#include <mach/regs-clock.h>
+
+/* note, cpufreq support deals in kHz, no Hz */
+
+static struct cpufreq_driver s3c24xx_driver;
+static struct s3c_cpufreq_config cpu_cur;
+static struct s3c_iotimings s3c24xx_iotiming;
+static struct cpufreq_frequency_table *pll_reg;
+static unsigned int last_target = ~0;
+static unsigned int ftab_size;
+static struct cpufreq_frequency_table *ftab;
+
+static struct clk *_clk_mpll;
+static struct clk *_clk_xtal;
+static struct clk *clk_fclk;
+static struct clk *clk_hclk;
+static struct clk *clk_pclk;
+static struct clk *clk_arm;
+
+static void s3c_cpufreq_getcur(struct s3c_cpufreq_config *cfg)
+{
+	unsigned long fclk, pclk, hclk, armclk;
+
+	cfg->freq.fclk = fclk = clk_get_rate(clk_fclk);
+	cfg->freq.hclk = hclk = clk_get_rate(clk_hclk);
+	cfg->freq.pclk = pclk = clk_get_rate(clk_pclk);
+	cfg->freq.armclk = armclk = clk_get_rate(clk_arm);
+
+	cfg->pll.index = __raw_readl(S3C2410_MPLLCON);
+	cfg->pll.frequency = fclk;
+
+	cfg->freq.hclk_tns = 1000000000 / (cfg->freq.hclk / 10);
+
+	cfg->divs.h_divisor = fclk / hclk;
+	cfg->divs.p_divisor = fclk / pclk;
+}
+
+static inline void s3c_cpufreq_calc(struct s3c_cpufreq_config *cfg)
+{
+	unsigned long pll = cfg->pll.frequency;
+
+	cfg->freq.fclk = pll;
+	cfg->freq.hclk = pll / cfg->divs.h_divisor;
+	cfg->freq.pclk = pll / cfg->divs.p_divisor;
+
+	/* convert hclk into 10ths of nanoseconds for io calcs */
+	cfg->freq.hclk_tns = 1000000000 / (cfg->freq.hclk / 10);
+}
+
+static inline int closer(unsigned int target, unsigned int n, unsigned int c)
+{
+	int diff_cur = abs(target - c);
+	int diff_new = abs(target - n);
+
+	return (diff_new < diff_cur);
+}
+
+static void s3c_cpufreq_show(const char *pfx,
+				 struct s3c_cpufreq_config *cfg)
+{
+	s3c_freq_dbg("%s: Fvco=%u, F=%lu, A=%lu, H=%lu (%u), P=%lu (%u)\n",
+		     pfx, cfg->pll.frequency, cfg->freq.fclk, cfg->freq.armclk,
+		     cfg->freq.hclk, cfg->divs.h_divisor,
+		     cfg->freq.pclk, cfg->divs.p_divisor);
+}
+
+/* functions to wrapper the driver info calls to do the cpu specific work */
+
+static void s3c_cpufreq_setio(struct s3c_cpufreq_config *cfg)
+{
+	if (cfg->info->set_iotiming)
+		(cfg->info->set_iotiming)(cfg, &s3c24xx_iotiming);
+}
+
+static int s3c_cpufreq_calcio(struct s3c_cpufreq_config *cfg)
+{
+	if (cfg->info->calc_iotiming)
+		return (cfg->info->calc_iotiming)(cfg, &s3c24xx_iotiming);
+
+	return 0;
+}
+
+static void s3c_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
+{
+	(cfg->info->set_refresh)(cfg);
+}
+
+static void s3c_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
+{
+	(cfg->info->set_divs)(cfg);
+}
+
+static int s3c_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
+{
+	return (cfg->info->calc_divs)(cfg);
+}
+
+static void s3c_cpufreq_setfvco(struct s3c_cpufreq_config *cfg)
+{
+	(cfg->info->set_fvco)(cfg);
+}
+
+static inline void s3c_cpufreq_resume_clocks(void)
+{
+	cpu_cur.info->resume_clocks();
+}
+
+static inline void s3c_cpufreq_updateclk(struct clk *clk,
+					 unsigned int freq)
+{
+	clk_set_rate(clk, freq);
+}
+
+static int s3c_cpufreq_settarget(struct cpufreq_policy *policy,
+				 unsigned int target_freq,
+				 struct cpufreq_frequency_table *pll)
+{
+	struct s3c_cpufreq_freqs freqs;
+	struct s3c_cpufreq_config cpu_new;
+	unsigned long flags;
+
+	cpu_new = cpu_cur;  /* copy new from current */
+
+	s3c_cpufreq_show("cur", &cpu_cur);
+
+	/* TODO - check for DMA currently outstanding */
+
+	cpu_new.pll = pll ? *pll : cpu_cur.pll;
+
+	if (pll)
+		freqs.pll_changing = 1;
+
+	/* update our frequencies */
+
+	cpu_new.freq.armclk = target_freq;
+	cpu_new.freq.fclk = cpu_new.pll.frequency;
+
+	if (s3c_cpufreq_calcdivs(&cpu_new) < 0) {
+		printk(KERN_ERR "no divisors for %d\n", target_freq);
+		goto err_notpossible;
+	}
+
+	s3c_freq_dbg("%s: got divs\n", __func__);
+
+	s3c_cpufreq_calc(&cpu_new);
+
+	s3c_freq_dbg("%s: calculated frequencies for new\n", __func__);
+
+	if (cpu_new.freq.hclk != cpu_cur.freq.hclk) {
+		if (s3c_cpufreq_calcio(&cpu_new) < 0) {
+			printk(KERN_ERR "%s: no IO timings\n", __func__);
+			goto err_notpossible;
+		}
+	}
+
+	s3c_cpufreq_show("new", &cpu_new);
+
+	/* setup our cpufreq parameters */
+
+	freqs.old = cpu_cur.freq;
+	freqs.new = cpu_new.freq;
+
+	freqs.freqs.cpu = 0;
+	freqs.freqs.old = cpu_cur.freq.armclk / 1000;
+	freqs.freqs.new = cpu_new.freq.armclk / 1000;
+
+	/* update f/h/p clock settings before we issue the change
+	 * notification, so that drivers do not need to do anything
+	 * special if they want to recalculate on CPUFREQ_PRECHANGE. */
+
+	s3c_cpufreq_updateclk(_clk_mpll, cpu_new.pll.frequency);
+	s3c_cpufreq_updateclk(clk_fclk, cpu_new.freq.fclk);
+	s3c_cpufreq_updateclk(clk_hclk, cpu_new.freq.hclk);
+	s3c_cpufreq_updateclk(clk_pclk, cpu_new.freq.pclk);
+
+	/* start the frequency change */
+
+	if (policy)
+		cpufreq_notify_transition(&freqs.freqs, CPUFREQ_PRECHANGE);
+
+	/* If hclk is staying the same, then we do not need to
+	 * re-write the IO or the refresh timings whilst we are changing
+	 * speed. */
+
+	local_irq_save(flags);
+
+	/* is our memory clock slowing down? */
+	if (cpu_new.freq.hclk < cpu_cur.freq.hclk) {
+		s3c_cpufreq_setrefresh(&cpu_new);
+		s3c_cpufreq_setio(&cpu_new);
+	}
+
+	if (cpu_new.freq.fclk == cpu_cur.freq.fclk) {
+		/* not changing PLL, just set the divisors */
+
+		s3c_cpufreq_setdivs(&cpu_new);
+	} else {
+		if (cpu_new.freq.fclk < cpu_cur.freq.fclk) {
+			/* slow the cpu down, then set divisors */
+
+			s3c_cpufreq_setfvco(&cpu_new);
+			s3c_cpufreq_setdivs(&cpu_new);
+		} else {
+			/* set the divisors, then speed up */
+
+			s3c_cpufreq_setdivs(&cpu_new);
+			s3c_cpufreq_setfvco(&cpu_new);
+		}
+	}
+
+	/* did our memory clock speed up */
+	if (cpu_new.freq.hclk > cpu_cur.freq.hclk) {
+		s3c_cpufreq_setrefresh(&cpu_new);
+		s3c_cpufreq_setio(&cpu_new);
+	}
+
+	/* update our current settings */
+	cpu_cur = cpu_new;
+
+	local_irq_restore(flags);
+
+	/* notify everyone we've done this */
+	if (policy)
+		cpufreq_notify_transition(&freqs.freqs, CPUFREQ_POSTCHANGE);
+
+	s3c_freq_dbg("%s: finished\n", __func__);
+	return 0;
+
+ err_notpossible:
+	printk(KERN_ERR "no compatible settings for %d\n", target_freq);
+	return -EINVAL;
+}
+
+/* s3c_cpufreq_target
+ *
+ * called by the cpufreq core to adjust the frequency that the CPU
+ * is currently running at.
+ */
+
+static int s3c_cpufreq_target(struct cpufreq_policy *policy,
+			      unsigned int target_freq,
+			      unsigned int relation)
+{
+	struct cpufreq_frequency_table *pll;
+	unsigned int index;
+
+	/* avoid repeated calls which cause a needless amout of duplicated
+	 * logging output (and CPU time as the calculation process is
+	 * done) */
+	if (target_freq == last_target)
+		return 0;
+
+	last_target = target_freq;
+
+	s3c_freq_dbg("%s: policy %p, target %u, relation %u\n",
+		     __func__, policy, target_freq, relation);
+
+	if (ftab) {
+		if (cpufreq_frequency_table_target(policy, ftab,
+						   target_freq, relation,
+						   &index)) {
+			s3c_freq_dbg("%s: table failed\n", __func__);
+			return -EINVAL;
+		}
+
+		s3c_freq_dbg("%s: adjust %d to entry %d (%u)\n", __func__,
+			     target_freq, index, ftab[index].frequency);
+		target_freq = ftab[index].frequency;
+	}
+
+	target_freq *= 1000;  /* convert target to Hz */
+
+	/* find the settings for our new frequency */
+
+	if (!pll_reg || cpu_cur.lock_pll) {
+		/* either we've not got any PLL values, or we've locked
+		 * to the current one. */
+		pll = NULL;
+	} else {
+		struct cpufreq_policy tmp_policy;
+		int ret;
+
+		/* we keep the cpu pll table in Hz, to ensure we get an
+		 * accurate value for the PLL output. */
+
+		tmp_policy.min = policy->min * 1000;
+		tmp_policy.max = policy->max * 1000;
+		tmp_policy.cpu = policy->cpu;
+
+		/* cpufreq_frequency_table_target uses a pointer to 'index'
+		 * which is the number of the table entry, not the value of
+		 * the table entry's index field. */
+
+		ret = cpufreq_frequency_table_target(&tmp_policy, pll_reg,
+						     target_freq, relation,
+						     &index);
+
+		if (ret < 0) {
+			printk(KERN_ERR "%s: no PLL available\n", __func__);
+			goto err_notpossible;
+		}
+
+		pll = pll_reg + index;
+
+		s3c_freq_dbg("%s: target %u => %u\n",
+			     __func__, target_freq, pll->frequency);
+
+		target_freq = pll->frequency;
+	}
+
+	return s3c_cpufreq_settarget(policy, target_freq, pll);
+
+ err_notpossible:
+	printk(KERN_ERR "no compatible settings for %d\n", target_freq);
+	return -EINVAL;
+}
+
+static unsigned int s3c_cpufreq_get(unsigned int cpu)
+{
+	return clk_get_rate(clk_arm) / 1000;
+}
+
+struct clk *s3c_cpufreq_clk_get(struct device *dev, const char *name)
+{
+	struct clk *clk;
+
+	clk = clk_get(dev, name);
+	if (IS_ERR(clk))
+		printk(KERN_ERR "cpufreq: failed to get clock '%s'\n", name);
+
+	return clk;
+}
+
+static int s3c_cpufreq_init(struct cpufreq_policy *policy)
+{
+	printk(KERN_INFO "%s: initialising policy %p\n", __func__, policy);
+
+	if (policy->cpu != 0)
+		return -EINVAL;
+
+	policy->cur = s3c_cpufreq_get(0);
+	policy->min = policy->cpuinfo.min_freq = 0;
+	policy->max = policy->cpuinfo.max_freq = cpu_cur.info->max.fclk / 1000;
+	policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+
+	/* feed the latency information from the cpu driver */
+	policy->cpuinfo.transition_latency = cpu_cur.info->latency;
+
+	if (ftab)
+		cpufreq_frequency_table_cpuinfo(policy, ftab);
+
+	return 0;
+}
+
+static __init int s3c_cpufreq_initclks(void)
+{
+	_clk_mpll = s3c_cpufreq_clk_get(NULL, "mpll");
+	_clk_xtal = s3c_cpufreq_clk_get(NULL, "xtal");
+	clk_fclk = s3c_cpufreq_clk_get(NULL, "fclk");
+	clk_hclk = s3c_cpufreq_clk_get(NULL, "hclk");
+	clk_pclk = s3c_cpufreq_clk_get(NULL, "pclk");
+	clk_arm = s3c_cpufreq_clk_get(NULL, "armclk");
+
+	if (IS_ERR(clk_fclk) || IS_ERR(clk_hclk) || IS_ERR(clk_pclk) ||
+	    IS_ERR(_clk_mpll) || IS_ERR(clk_arm) || IS_ERR(_clk_xtal)) {
+		printk(KERN_ERR "%s: could not get clock(s)\n", __func__);
+		return -ENOENT;
+	}
+
+	printk(KERN_INFO "%s: clocks f=%lu,h=%lu,p=%lu,a=%lu\n", __func__,
+	       clk_get_rate(clk_fclk) / 1000,
+	       clk_get_rate(clk_hclk) / 1000,
+	       clk_get_rate(clk_pclk) / 1000,
+	       clk_get_rate(clk_arm) / 1000);
+
+	return 0;
+}
+
+static int s3c_cpufreq_verify(struct cpufreq_policy *policy)
+{
+	if (policy->cpu != 0)
+		return -EINVAL;
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static struct cpufreq_frequency_table suspend_pll;
+static unsigned int suspend_freq;
+
+static int s3c_cpufreq_suspend(struct cpufreq_policy *policy, pm_message_t pmsg)
+{
+	suspend_pll.frequency = clk_get_rate(_clk_mpll);
+	suspend_pll.index = __raw_readl(S3C2410_MPLLCON);
+	suspend_freq = s3c_cpufreq_get(0) * 1000;
+
+	return 0;
+}
+
+static int s3c_cpufreq_resume(struct cpufreq_policy *policy)
+{
+	int ret;
+
+	s3c_freq_dbg("%s: resuming with policy %p\n", __func__, policy);
+
+	last_target = ~0;	/* invalidate last_target setting */
+
+	/* first, find out what speed we resumed at. */
+	s3c_cpufreq_resume_clocks();
+
+	/* whilst we will be called later on, we try and re-set the
+	 * cpu frequencies as soon as possible so that we do not end
+	 * up resuming devices and then immediatley having to re-set
+	 * a number of settings once these devices have restarted.
+	 *
+	 * as a note, it is expected devices are not used until they
+	 * have been un-suspended and at that time they should have
+	 * used the updated clock settings.
+	 */
+
+	ret = s3c_cpufreq_settarget(NULL, suspend_freq, &suspend_pll);
+	if (ret) {
+		printk(KERN_ERR "%s: failed to reset pll/freq\n", __func__);
+		return ret;
+	}
+
+	return 0;
+}
+#else
+#define s3c_cpufreq_resume NULL
+#define s3c_cpufreq_suspend NULL
+#endif
+
+static struct cpufreq_driver s3c24xx_driver = {
+	.flags		= CPUFREQ_STICKY,
+	.verify		= s3c_cpufreq_verify,
+	.target		= s3c_cpufreq_target,
+	.get		= s3c_cpufreq_get,
+	.init		= s3c_cpufreq_init,
+	.suspend	= s3c_cpufreq_suspend,
+	.resume		= s3c_cpufreq_resume,
+	.name		= "s3c24xx",
+};
+
+
+int __init s3c_cpufreq_register(struct s3c_cpufreq_info *info)
+{
+	if (!info || !info->name) {
+		printk(KERN_ERR "%s: failed to pass valid information\n",
+		       __func__);
+		return -EINVAL;
+	}
+
+	printk(KERN_INFO "S3C24XX CPU Frequency driver, %s cpu support\n",
+	       info->name);
+
+	/* check our driver info has valid data */
+
+	BUG_ON(info->set_refresh == NULL);
+	BUG_ON(info->set_divs == NULL);
+	BUG_ON(info->calc_divs == NULL);
+
+	/* info->set_fvco is optional, depending on whether there
+	 * is a need to set the clock code. */
+
+	cpu_cur.info = info;
+
+	/* Note, driver registering should probably update locktime */
+
+	return 0;
+}
+
+int __init s3c_cpufreq_setboard(struct s3c_cpufreq_board *board)
+{
+	struct s3c_cpufreq_board *ours;
+
+	if (!board) {
+		printk(KERN_INFO "%s: no board data\n", __func__);
+		return -EINVAL;
+	}
+
+	/* Copy the board information so that each board can make this
+	 * initdata. */
+
+	ours = kzalloc(sizeof(struct s3c_cpufreq_board), GFP_KERNEL);
+	if (ours == NULL) {
+		printk(KERN_ERR "%s: no memory\n", __func__);
+		return -ENOMEM;
+	}
+
+	*ours = *board;
+	cpu_cur.board = ours;
+
+	return 0;
+}
+
+int __init s3c_cpufreq_auto_io(void)
+{
+	int ret;
+
+	if (!cpu_cur.info->get_iotiming) {
+		printk(KERN_ERR "%s: get_iotiming undefined\n", __func__);
+		return -ENOENT;
+	}
+
+	printk(KERN_INFO "%s: working out IO settings\n", __func__);
+
+	ret = (cpu_cur.info->get_iotiming)(&cpu_cur, &s3c24xx_iotiming);
+	if (ret)
+		printk(KERN_ERR "%s: failed to get timings\n", __func__);
+
+	return ret;
+}
+
+/* if one or is zero, then return the other, otherwise return the min */
+#define do_min(_a, _b) ((_a) == 0 ? (_b) : (_b) == 0 ? (_a) : min(_a, _b))
+
+/**
+ * s3c_cpufreq_freq_min - find the minimum settings for the given freq.
+ * @dst: The destination structure
+ * @a: One argument.
+ * @b: The other argument.
+ *
+ * Create a minimum of each frequency entry in the 'struct s3c_freq',
+ * unless the entry is zero when it is ignored and the non-zero argument
+ * used.
+ */
+static void s3c_cpufreq_freq_min(struct s3c_freq *dst,
+				 struct s3c_freq *a, struct s3c_freq *b)
+{
+	dst->fclk = do_min(a->fclk, b->fclk);
+	dst->hclk = do_min(a->hclk, b->hclk);
+	dst->pclk = do_min(a->pclk, b->pclk);
+	dst->armclk = do_min(a->armclk, b->armclk);
+}
+
+static inline u32 calc_locktime(u32 freq, u32 time_us)
+{
+	u32 result;
+
+	result = freq * time_us;
+	result = DIV_ROUND_UP(result, 1000 * 1000);
+
+	return result;
+}
+
+static void s3c_cpufreq_update_loctkime(void)
+{
+	unsigned int bits = cpu_cur.info->locktime_bits;
+	u32 rate = (u32)clk_get_rate(_clk_xtal);
+	u32 val;
+
+	if (bits == 0) {
+		WARN_ON(1);
+		return;
+	}
+
+	val = calc_locktime(rate, cpu_cur.info->locktime_u) << bits;
+	val |= calc_locktime(rate, cpu_cur.info->locktime_m);
+
+	printk(KERN_INFO "%s: new locktime is 0x%08x\n", __func__, val);
+	__raw_writel(val, S3C2410_LOCKTIME);
+}
+
+static int s3c_cpufreq_build_freq(void)
+{
+	int size, ret;
+
+	if (!cpu_cur.info->calc_freqtable)
+		return -EINVAL;
+
+	kfree(ftab);
+	ftab = NULL;
+
+	size = cpu_cur.info->calc_freqtable(&cpu_cur, NULL, 0);
+	size++;
+
+	ftab = kmalloc(sizeof(struct cpufreq_frequency_table) * size, GFP_KERNEL);
+	if (!ftab) {
+		printk(KERN_ERR "%s: no memory for tables\n", __func__);
+		return -ENOMEM;
+	}
+
+	ftab_size = size;
+
+	ret = cpu_cur.info->calc_freqtable(&cpu_cur, ftab, size);
+	s3c_cpufreq_addfreq(ftab, ret, size, CPUFREQ_TABLE_END);
+
+	return 0;
+}
+
+static int __init s3c_cpufreq_initcall(void)
+{
+	int ret = 0;
+
+	if (cpu_cur.info && cpu_cur.board) {
+		ret = s3c_cpufreq_initclks();
+		if (ret)
+			goto out;
+
+		/* get current settings */
+		s3c_cpufreq_getcur(&cpu_cur);
+		s3c_cpufreq_show("cur", &cpu_cur);
+
+		if (cpu_cur.board->auto_io) {
+			ret = s3c_cpufreq_auto_io();
+			if (ret) {
+				printk(KERN_ERR "%s: failed to get io timing\n",
+				       __func__);
+				goto out;
+			}
+		}
+
+		if (cpu_cur.board->need_io && !cpu_cur.info->set_iotiming) {
+			printk(KERN_ERR "%s: no IO support registered\n",
+			       __func__);
+			ret = -EINVAL;
+			goto out;
+		}
+
+		if (!cpu_cur.info->need_pll)
+			cpu_cur.lock_pll = 1;
+
+		s3c_cpufreq_update_loctkime();
+
+		s3c_cpufreq_freq_min(&cpu_cur.max, &cpu_cur.board->max,
+				     &cpu_cur.info->max);
+
+		if (cpu_cur.info->calc_freqtable)
+			s3c_cpufreq_build_freq();
+
+		ret = cpufreq_register_driver(&s3c24xx_driver);
+	}
+
+ out:
+	return ret;
+}
+
+late_initcall(s3c_cpufreq_initcall);
+
+/**
+ * s3c_plltab_register - register CPU PLL table.
+ * @plls: The list of PLL entries.
+ * @plls_no: The size of the PLL entries @plls.
+ *
+ * Register the given set of PLLs with the system.
+ */
+int __init s3c_plltab_register(struct cpufreq_frequency_table *plls,
+			       unsigned int plls_no)
+{
+	struct cpufreq_frequency_table *vals;
+	unsigned int size;
+
+	size = sizeof(struct cpufreq_frequency_table) * (plls_no + 1);
+
+	vals = kmalloc(size, GFP_KERNEL);
+	if (vals) {
+		memcpy(vals, plls, size);
+		pll_reg = vals;
+
+		/* write a terminating entry, we don't store it in the
+		 * table that is stored in the kernel */
+		vals += plls_no;
+		vals->frequency = CPUFREQ_TABLE_END;
+
+		printk(KERN_INFO "cpufreq: %d PLL entries\n", plls_no);
+	} else
+		printk(KERN_ERR "cpufreq: no memory for PLL tables\n");
+
+	return vals ? 0 : -ENOMEM;
+}
diff --git a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
new file mode 100644
index 00000000000..e078821b360
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
@@ -0,0 +1,183 @@
+/* arch/arm/plat-s3c/include/plat/cpu-freq.h
+ *
+ * Copyright (c) 2006,2007,2009 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C CPU frequency scaling support - core support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <plat/cpu-freq.h>
+
+#define MAX_BANKS (8)
+#define S3C2412_MAX_IO	(8)
+
+/**
+ * struct s3c2410_iobank_timing - IO bank timings for S3C2410 style timings
+ * @bankcon: The cached version of settings in this structure.
+ * @tacp:
+ * @tacs: Time from address valid to nCS asserted.
+ * @tcos: Time from nCS asserted to nOE or nWE asserted.
+ * @tacc: Time that nOE or nWE is asserted.
+ * @tcoh: Time nCS is held after nOE or nWE are released.
+ * @tcah: Time address is held for after
+ * @nwait_en: Whether nWAIT is enabled for this bank.
+ *
+ * This structure represents the IO timings for a S3C2410 style IO bank
+ * used by the CPU frequency support if it needs to change the settings
+ * of the IO.
+ */
+struct s3c2410_iobank_timing {
+	unsigned long	bankcon;
+	unsigned int	tacp;
+	unsigned int	tacs;
+	unsigned int	tcos;
+	unsigned int	tacc;
+	unsigned int	tcoh;		/* nCS hold afrer nOE/nWE */
+	unsigned int	tcah;		/* Address hold after nCS */
+	unsigned char	nwait_en;	/* nWait enabled for bank. */
+};
+
+union s3c_iobank {
+	  struct s3c2410_iobank_timing	*io_2410;
+};
+
+/**
+ * struct s3c_iotimings - Chip IO timings holder
+ * @bank: The timings for each IO bank.
+ */
+struct s3c_iotimings {
+	union s3c_iobank	bank[MAX_BANKS];
+};
+
+/**
+ * struct s3c_plltab - PLL table information.
+ * @vals: List of PLL values.
+ * @size: Size of the PLL table @vals.
+ */
+struct s3c_plltab {
+	struct s3c_pllval	*vals;
+	int			 size;
+};
+
+/**
+ * struct s3c_cpufreq_info - Information for the CPU frequency driver.
+ * @name: The name of this implementation.
+ * @max: The maximum frequencies for the system.
+ * @latency: Transition latency to give to cpufreq.
+ * @locktime_m: The lock-time in uS for the MPLL.
+ * @locktime_u: The lock-time in uS for the UPLL.
+ * @locttime_bits: The number of bits each LOCKTIME field.
+ * @need_pll: Set if this driver needs to change the PLL values to acheive
+ *	any frequency changes. This is really only need by devices like the
+ *	S3C2410 where there is no or limited divider between the PLL and the
+ *	ARMCLK.
+ * @resume_clocks: Update the clocks on resume.
+ * @get_iotiming: Get the current IO timing data, mainly for use at start.
+ * @set_iotiming: Update the IO timings from the cached copies calculated
+ *	from the @calc_iotiming entry when changing the frequency.
+ * @calc_iotiming: Calculate and update the cached copies of the IO timings
+ *	from the newly calculated frequencies.
+ * @calc_freqtable: Calculate (fill in) the given frequency table from the
+ *	current frequency configuration. If the table passed in is NULL,
+ *	then the return is the number of elements to be filled for allocation
+ *	of the table.
+ * @set_refresh: Set the memory refresh configuration.
+ * @set_fvco: Set the PLL frequencies.
+ * @set_divs: Update the clock divisors.
+ * @calc_divs: Calculate the clock divisors.
+ */
+struct s3c_cpufreq_info {
+	const char		*name;
+	struct s3c_freq		max;
+
+	unsigned int		latency;
+
+	unsigned int		locktime_m;
+	unsigned int		locktime_u;
+	unsigned char		locktime_bits;
+
+	unsigned int		need_pll:1;
+
+	/* driver routines */
+
+	void		(*resume_clocks)(void);
+
+	int		(*get_iotiming)(struct s3c_cpufreq_config *cfg,
+					struct s3c_iotimings *timings);
+
+	void		(*set_iotiming)(struct s3c_cpufreq_config *cfg,
+					struct s3c_iotimings *timings);
+
+	int		(*calc_iotiming)(struct s3c_cpufreq_config *cfg,
+					 struct s3c_iotimings *timings);
+
+	int		(*calc_freqtable)(struct s3c_cpufreq_config *cfg,
+					  struct cpufreq_frequency_table *t,
+					  size_t table_size);
+
+	void		(*set_refresh)(struct s3c_cpufreq_config *cfg);
+	void		(*set_fvco)(struct s3c_cpufreq_config *cfg);
+	void		(*set_divs)(struct s3c_cpufreq_config *cfg);
+	int		(*calc_divs)(struct s3c_cpufreq_config *cfg);
+};
+
+extern int s3c_cpufreq_register(struct s3c_cpufreq_info *info);
+
+extern int s3c_plltab_register(struct cpufreq_frequency_table *plls, unsigned int plls_no);
+
+/* Useful utility functions. */
+
+extern struct clk *s3c_cpufreq_clk_get(struct device *, const char *);
+
+/* S3C2410 and compatible exported functions */
+
+extern void s3c2410_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg);
+
+extern int s3c2410_iotiming_calc(struct s3c_cpufreq_config *cfg,
+				 struct s3c_iotimings *iot);
+
+extern int s3c2410_iotiming_get(struct s3c_cpufreq_config *cfg,
+				struct s3c_iotimings *timings);
+
+extern void s3c2410_iotiming_set(struct s3c_cpufreq_config *cfg,
+				 struct s3c_iotimings *iot);
+
+extern void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg);
+
+#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUG
+#define s3c_freq_dbg(x...) printk(KERN_INFO x)
+#else
+#define s3c_freq_dbg(x...) do { if (0) printk(x); } while (0)
+#endif /* CONFIG_CPU_FREQ_S3C24XX_DEBUG */
+
+#ifdef CONFIG_CPU_FREQ_S3C24XX_IODEBUG
+#define s3c_freq_iodbg(x...) printk(KERN_INFO x)
+#else
+#define s3c_freq_iodbg(x...) do { if (0) printk(x); } while (0)
+#endif /* CONFIG_CPU_FREQ_S3C24XX_IODEBUG */
+
+static inline int s3c_cpufreq_addfreq(struct cpufreq_frequency_table *table,
+				      int index, size_t table_size,
+				      unsigned int freq)
+{
+	if (index < 0)
+		return index;
+
+	if (table) {
+		if (index >= table_size)
+			return -ENOMEM;
+
+		s3c_freq_dbg("%s: { %d = %u kHz }\n",
+			     __func__, index, freq);
+
+		table[index].index = index;
+		table[index].frequency = freq;
+	}
+
+	return index + 1;
+}
-- 
cgit v1.2.3


From ea5fe9aedf512d20b75b7dcfd54ab99ae5c0934b Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:22 +0100
Subject: ARM: S3C: CPUFREQ: Documentation for cpufreq header

Update arch/arm/plat-s3c/include/plat/cpu-freq.h to include kerneldoc
style documentation.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c/include/plat/cpu-freq.h | 91 +++++++++++++++++++++++++++----
 1 file changed, 81 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-s3c/include/plat/cpu-freq.h b/arch/arm/plat-s3c/include/plat/cpu-freq.h
index c86a13307e9..0ba7670fd07 100644
--- a/arch/arm/plat-s3c/include/plat/cpu-freq.h
+++ b/arch/arm/plat-s3c/include/plat/cpu-freq.h
@@ -17,6 +17,21 @@ struct s3c_cpufreq_info;
 struct s3c_cpufreq_board;
 struct s3c_iotimings;
 
+/**
+ * struct s3c_freq - frequency information (mainly for core drivers)
+ * @fclk: The FCLK frequency in Hz.
+ * @armclk: The ARMCLK frequency in Hz.
+ * @hclk_tns: HCLK cycle time in 10ths of nano-seconds.
+ * @hclk: The HCLK frequency in Hz.
+ * @pclk: The PCLK frequency in Hz.
+ *
+ * This contains the frequency information about the current configuration
+ * mainly for the core drivers to ensure we do not end up passing about
+ * a large number of parameters.
+ *
+ * The @hclk_tns field is a useful cache for the parts of the drivers that
+ * need to calculate IO timings and suchlike.
+ */
 struct s3c_freq {
 	unsigned long	fclk;
 	unsigned long	armclk;
@@ -25,33 +40,75 @@ struct s3c_freq {
 	unsigned long	pclk;
 };
 
-/* wrapper 'struct cpufreq_freqs' so that any drivers receiving the
+/**
+ * struct s3c_cpufreq_freqs - s3c cpufreq notification information.
+ * @freqs: The cpufreq setting information.
+ * @old: The old clock settings.
+ * @new: The new clock settings.
+ * @pll_changing: Set if the PLL is changing.
+ *
+ * Wrapper 'struct cpufreq_freqs' so that any drivers receiving the
  * notification can use this information that is not provided by just
  * having the core frequency alone.
+ *
+ * The pll_changing flag is used to indicate if the PLL itself is
+ * being set during this change. This is important as the clocks
+ * will temporarily be set to the XTAL clock during this time, so
+ * drivers may want to close down their output during this time.
+ *
+ * Note, this is not being used by any current drivers and therefore
+ * may be removed in the future.
  */
-
 struct s3c_cpufreq_freqs {
 	struct cpufreq_freqs	freqs;
 	struct s3c_freq		old;
 	struct s3c_freq		new;
+
+	unsigned int		pll_changing:1;
 };
 
 #define to_s3c_cpufreq(_cf) container_of(_cf, struct s3c_cpufreq_freqs, freqs)
 
+/**
+ * struct s3c_clkdivs - clock divisor information
+ * @p_divisor: Divisor from FCLK to PCLK.
+ * @h_divisor: Divisor from FCLK to HCLK.
+ * @arm_divisor: Divisor from FCLK to ARMCLK (not all CPUs).
+ * @dvs: Non-zero if using DVS mode for ARMCLK.
+ *
+ * Divisor settings for the core clocks.
+ */
 struct s3c_clkdivs {
-	int		p_divisor;	/* fclk / pclk */
-	int		h_divisor;	/* fclk / hclk */
-	int		arm_divisor;	/* not all cpus have this. */
-	unsigned char	dvs;		/* using dvs mode to arm. */
+	int		p_divisor;
+	int		h_divisor;
+	int		arm_divisor;
+	unsigned char	dvs;
 };
 
 #define PLLVAL(_m, _p, _s) (((_m) << 12) | ((_p) << 4) | (_s))
 
+/**
+ * struct s3c_pllval - PLL value entry.
+ * @freq: The frequency for this entry in Hz.
+ * @pll_reg: The PLL register setting for this PLL value.
+ */
 struct s3c_pllval {
 	unsigned long		freq;
 	unsigned long		pll_reg;
 };
 
+/**
+ * struct s3c_cpufreq_config - current cpu frequency configuration
+ * @freq: The current settings for the core clocks.
+ * @pll: The PLL table entry for the current PLL settings.
+ * @divs: The divisor settings for the core clocks.
+ * @info: The current core driver information.
+ * @board: The information for the board we are running on.
+ *
+ * This is for the core drivers that need to know information about
+ * the current settings and values. It should not be needed by any
+ * device drivers.
+*/
 struct s3c_cpufreq_config {
 	struct s3c_freq		freq;
 	struct s3c_pllval	pll;
@@ -60,13 +117,27 @@ struct s3c_cpufreq_config {
 	struct s3c_cpufreq_board *board;
 };
 
-/* s3c_cpufreq_board
+/**
+ * struct s3c_cpufreq_board - per-board cpu frequency informatin
+ * @refresh: The SDRAM refresh period in nanoseconds.
+ * @auto_io: Set if the IO timing settings should be generated from the
+ *	initialisation time hardware registers.
+ * @need_io: Set if the board has external IO on any of the chipselect
+ *	lines that will require the hardware timing registers to be
+ *	updated on a clock change.
+ * @max: The maxium frequency limits for the system. Any field that
+ *	is left at zero will use the CPU's settings.
+ *
+ * This contains the board specific settings that affect how the CPU
+ * drivers chose settings. These include the memory refresh and IO
+ * timing information.
  *
- * per-board configuraton information, such as memory refresh and
- * how to initialise IO timings.
+ * Registration depends on the driver being used, the ARMCLK only
+ * implementation does not currently need this but the older style
+ * driver requires this to be available.
  */
 struct s3c_cpufreq_board {
-	unsigned int	refresh;	/* refresh period in ns */
+	unsigned int	refresh;
 	unsigned int	auto_io:1;	/* automatically init io timings. */
 	unsigned int	need_io:1;	/* set if needs io timing support. */
 
-- 
cgit v1.2.3


From d6fc87d3f7d236892e4d0003a07cd2b5171e5e27 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:23 +0100
Subject: ARM: S3C: CPUFREQ: Move struct s3c_cpufreq_config to cpu-freq-core.h

Move the structure s3c_cpufreq_config from cpu-freq.h to the
less advertised cpu-freq-core.h as it is not needed by anything
outside the core drivers.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c/include/plat/cpu-freq.h          | 20 -----------------
 arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h | 25 ++++++++++++++++++++++
 2 files changed, 25 insertions(+), 20 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-s3c/include/plat/cpu-freq.h b/arch/arm/plat-s3c/include/plat/cpu-freq.h
index 0ba7670fd07..7b982b7f28c 100644
--- a/arch/arm/plat-s3c/include/plat/cpu-freq.h
+++ b/arch/arm/plat-s3c/include/plat/cpu-freq.h
@@ -97,26 +97,6 @@ struct s3c_pllval {
 	unsigned long		pll_reg;
 };
 
-/**
- * struct s3c_cpufreq_config - current cpu frequency configuration
- * @freq: The current settings for the core clocks.
- * @pll: The PLL table entry for the current PLL settings.
- * @divs: The divisor settings for the core clocks.
- * @info: The current core driver information.
- * @board: The information for the board we are running on.
- *
- * This is for the core drivers that need to know information about
- * the current settings and values. It should not be needed by any
- * device drivers.
-*/
-struct s3c_cpufreq_config {
-	struct s3c_freq		freq;
-	struct s3c_pllval	pll;
-	struct s3c_clkdivs	divs;
-	struct s3c_cpufreq_info *info;	/* for core, not drivers */
-	struct s3c_cpufreq_board *board;
-};
-
 /**
  * struct s3c_cpufreq_board - per-board cpu frequency informatin
  * @refresh: The SDRAM refresh period in nanoseconds.
diff --git a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
index e078821b360..7938fb0bc38 100644
--- a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
+++ b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
@@ -64,6 +64,31 @@ struct s3c_plltab {
 	int			 size;
 };
 
+/**
+ * struct s3c_cpufreq_config - current cpu frequency configuration
+ * @freq: The current settings for the core clocks.
+ * @max: Maxium settings, derived from core, board and user settings.
+ * @pll: The PLL table entry for the current PLL settings.
+ * @divs: The divisor settings for the core clocks.
+ * @info: The current core driver information.
+ * @board: The information for the board we are running on.
+ * @lock_pll: Set if the PLL settings cannot be changed.
+ *
+ * This is for the core drivers that need to know information about
+ * the current settings and values. It should not be needed by any
+ * device drivers.
+*/
+struct s3c_cpufreq_config {
+	struct s3c_freq		freq;
+	struct s3c_freq		max;
+	struct cpufreq_frequency_table pll;
+	struct s3c_clkdivs	divs;
+	struct s3c_cpufreq_info *info;	/* for core, not drivers */
+	struct s3c_cpufreq_board *board;
+
+	unsigned int	lock_pll:1;
+};
+
 /**
  * struct s3c_cpufreq_info - Information for the CPU frequency driver.
  * @name: The name of this implementation.
-- 
cgit v1.2.3


From 89c52ed4687faca6bf0eabf6d46eaee4a14376b3 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:24 +0100
Subject: ARM: Add ARCH_HAS_CPUFREQ for presence of CPUFREQ driver

Add ARCH_HAS_CPUFREQ so that each machine config can select
it if they have CPUFREQ driver support. This means that the
CPUFREQ specific area does not need the if statement updating
each time a new machine is added.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/Kconfig | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index aef63c8e3d2..7dbaabd8df3 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -126,6 +126,13 @@ config ARCH_HAS_ILOG2_U32
 config ARCH_HAS_ILOG2_U64
 	bool
 
+config ARCH_HAS_CPUFREQ
+	bool
+	help
+	  Internal node to signify that the ARCH has CPUFREQ support
+	  and that the relevant menu configurations are displayed for
+	  it.
+
 config GENERIC_HWEIGHT
 	bool
 	default y
@@ -203,6 +210,7 @@ config ARCH_AAEC2000
 config ARCH_INTEGRATOR
 	bool "ARM Ltd. Integrator family"
 	select ARM_AMBA
+	select ARCH_HAS_CPUFREQ
 	select HAVE_CLK
 	select COMMON_CLKDEV
 	select ICST525
@@ -509,6 +517,7 @@ config ARCH_PXA
 	bool "PXA2xx/PXA3xx-based"
 	depends on MMU
 	select ARCH_MTD_XIP
+	select ARCH_HAS_CPUFREQ
 	select GENERIC_GPIO
 	select HAVE_CLK
 	select COMMON_CLKDEV
@@ -551,6 +560,7 @@ config ARCH_SA1100
 	select ISA
 	select ARCH_SPARSEMEM_ENABLE
 	select ARCH_MTD_XIP
+	select ARCH_HAS_CPUFREQ
 	select GENERIC_GPIO
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
@@ -573,6 +583,7 @@ config ARCH_S3C64XX
 	bool "Samsung S3C64XX"
 	select GENERIC_GPIO
 	select HAVE_CLK
+	select ARCH_HAS_CPUFREQ
 	help
 	  Samsung S3C64XX series based systems
 
@@ -632,6 +643,7 @@ config ARCH_OMAP
 	select GENERIC_GPIO
 	select HAVE_CLK
 	select ARCH_REQUIRE_GPIOLIB
+	select ARCH_HAS_CPUFREQ
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	help
@@ -1241,7 +1253,7 @@ endmenu
 
 menu "CPU Power Management"
 
-if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_PXA || ARCH_S3C64XX)
+if ARCH_HAS_CPUFREQ
 
 source "drivers/cpufreq/Kconfig"
 
-- 
cgit v1.2.3


From 9d56c02a5a171e1fdb87f3b718b418cb0522d2b1 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:25 +0100
Subject: ARM: Add S3C24XX to CPUFreq KConfig

Add the S3C24XX to the main ARM CPUFreq Kconfig support list.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/Kconfig | 41 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 41 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 7dbaabd8df3..c7a83efef0b 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -573,6 +573,7 @@ config ARCH_SA1100
 config ARCH_S3C2410
 	bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442, S3C2443"
 	select GENERIC_GPIO
+	select ARCH_HAS_CPUFREQ
 	select HAVE_CLK
 	help
 	  Samsung S3C2410X CPU based systems, such as the Simtec Electronics
@@ -1288,6 +1289,46 @@ config CPU_FREQ_S3C64XX
 	bool "CPUfreq support for Samsung S3C64XX CPUs"
 	depends on CPU_FREQ && CPU_S3C6410
 
+config CPU_FREQ_S3C
+	bool
+	help
+	  Internal configuration node for common cpufreq on Samsung SoC
+
+config CPU_FREQ_S3C24XX
+	bool "CPUfreq driver for Samsung S3C24XX series CPUs"
+	depends on ARCH_S3C2410 && CPU_FREQ && EXPERIMENTAL
+	select CPU_FREQ_S3C
+	help
+	  This enables the CPUfreq driver for the Samsung S3C24XX family
+	  of CPUs.
+
+	  For details, take a look at <file:Documentation/cpu-freq>.
+
+	  If in doubt, say N.
+
+config CPU_FREQ_S3C24XX_PLL
+	bool "Support CPUfreq changing of PLL frequency"
+	depends on CPU_FREQ_S3C24XX && EXPERIMENTAL
+	help
+	  Compile in support for changing the PLL frequency from the
+	  S3C24XX series CPUfreq driver. The PLL takes time to settle
+	  after a frequency change, so by default it is not enabled.
+
+	  This also means that the PLL tables for the selected CPU(s) will
+	  be built which may increase the size of the kernel image.
+
+config CPU_FREQ_S3C24XX_DEBUG
+	bool "Debug CPUfreq Samsung driver core"
+	depends on CPU_FREQ_S3C24XX
+	help
+	  Enable s3c_freq_dbg for the Samsung S3C CPUfreq core
+
+config CPU_FREQ_S3C24XX_IODEBUG
+	bool "Debug CPUfreq Samsung driver IO timing"
+	depends on CPU_FREQ_S3C24XX
+	help
+	  Enable s3c_freq_iodbg for the Samsung S3C CPUfreq core
+
 endif
 
 source "drivers/cpuidle/Kconfig"
-- 
cgit v1.2.3


From 831a6fcb9393960b35173fa2e0f835b710152fff Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:26 +0100
Subject: ARM: S3C2410: CPUFREQ: Add io-timing support.

Add io-timing support for frequency scaling on the S3C2410 SoC.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c24xx/Kconfig            |   9 +
 arch/arm/plat-s3c24xx/Makefile           |   1 +
 arch/arm/plat-s3c24xx/s3c2410-iotiming.c | 432 +++++++++++++++++++++++++++++++
 3 files changed, 442 insertions(+)
 create mode 100644 arch/arm/plat-s3c24xx/s3c2410-iotiming.c

(limited to 'arch')

diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index 5b0bc914f58..d82d30c2f05 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -107,6 +107,15 @@ config S3C24XX_SPI_BUS1_GPG5_GPG6_GPG7
 
 # common code for s3c24xx based machines, such as the SMDKs.
 
+# cpu frequency items common between s3c2410 and s3c2440/s3c2442
+
+config S3C2410_IOTIMING
+	bool
+	depends on CPU_FREQ_S3C24XX
+	help
+	  Internal node to select io timing code that is common to the s3c2410
+	  and s3c2440/s3c2442 cpu frequency support.
+
 config MACH_SMDK
 	bool
 	help
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index 1f6add552bd..6f9afd13ab4 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -35,6 +35,7 @@ obj-$(CONFIG_S3C24XX_PWM)	+= pwm.o
 obj-$(CONFIG_S3C2410_CLOCK)	+= s3c2410-clock.o
 obj-$(CONFIG_S3C2410_DMA)	+= dma.o
 obj-$(CONFIG_S3C24XX_ADC)	+= adc.o
+obj-$(CONFIG_S3C2410_IOTIMING)	+= s3c2410-iotiming.o
 
 # device specific setup and/or initialisation
 obj-$(CONFIG_ARCH_S3C2410)	+= setup-i2c.o
diff --git a/arch/arm/plat-s3c24xx/s3c2410-iotiming.c b/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
new file mode 100644
index 00000000000..26fe2129cf2
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
@@ -0,0 +1,432 @@
+/* linux/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
+ *
+ * Copyright (c) 2006,2008,2009 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX CPU Frequency scaling - IO timing for S3C2410/S3C2440/S3C2442
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/cpufreq.h>
+#include <linux/io.h>
+
+#include <mach/map.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-clock.h>
+
+#include <plat/cpu-freq-core.h>
+
+#define print_ns(x) ((x) / 10), ((x) % 10)
+
+/**
+ * s3c2410_print_timing - print bank timing data for debug purposes
+ * @pfx: The prefix to put on the output
+ * @timings: The timing inforamtion to print.
+*/
+static void s3c2410_print_timing(const char *pfx,
+				 struct s3c_iotimings *timings)
+{
+	struct s3c2410_iobank_timing *bt;
+	int bank;
+
+	for (bank = 0; bank < MAX_BANKS; bank++) {
+		bt = timings->bank[bank].io_2410;
+		if (!bt)
+			continue;
+
+		printk(KERN_DEBUG "%s %d: Tacs=%d.%d, Tcos=%d.%d, Tacc=%d.%d, "
+		       "Tcoh=%d.%d, Tcah=%d.%d\n", pfx, bank,
+		       print_ns(bt->tacs),
+		       print_ns(bt->tcos),
+		       print_ns(bt->tacc),
+		       print_ns(bt->tcoh),
+		       print_ns(bt->tcah));
+	}
+}
+
+/**
+ * bank_reg - convert bank number to pointer to the control register.
+ * @bank: The IO bank number.
+ */
+static inline void __iomem *bank_reg(unsigned int bank)
+{
+	return S3C2410_BANKCON0 + (bank << 2);
+}
+
+/**
+ * bank_is_io - test whether bank is used for IO
+ * @bankcon: The bank control register.
+ *
+ * This is a simplistic test to see if any BANKCON[x] is not an IO
+ * bank. It currently does not take into account whether BWSCON has
+ * an illegal width-setting in it, or if the pin connected to nCS[x]
+ * is actually being handled as a chip-select.
+ */
+static inline int bank_is_io(unsigned long bankcon)
+{
+	return !(bankcon & S3C2410_BANKCON_SDRAM);
+}
+
+/**
+ * to_div - convert cycle time to divisor
+ * @cyc: The cycle time, in 10ths of nanoseconds.
+ * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
+ *
+ * Convert the given cycle time into the divisor to use to obtain it from
+ * HCLK.
+*/
+static inline unsigned int to_div(unsigned int cyc, unsigned int hclk_tns)
+{
+	if (cyc == 0)
+		return 0;
+
+	return DIV_ROUND_UP(cyc, hclk_tns);
+}
+
+/**
+ * calc_0124 - calculate divisor control for divisors that do /0, /1. /2 and /4
+ * @cyc: The cycle time, in 10ths of nanoseconds.
+ * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
+ * @v: Pointer to register to alter.
+ * @shift: The shift to get to the control bits.
+ *
+ * Calculate the divisor, and turn it into the correct control bits to
+ * set in the result, @v.
+ */
+static unsigned int calc_0124(unsigned int cyc, unsigned long hclk_tns,
+			      unsigned long *v, int shift)
+{
+	unsigned int div = to_div(cyc, hclk_tns);
+	unsigned long val;
+
+	s3c_freq_iodbg("%s: cyc=%d, hclk=%lu, shift=%d => div %d\n",
+		       __func__, cyc, hclk_tns, shift, div);
+
+	switch (div) {
+	case 0:
+		val = 0;
+		break;
+	case 1:
+		val = 1;
+		break;
+	case 2:
+		val = 2;
+		break;
+	case 3:
+	case 4:
+		val = 3;
+		break;
+	default:
+		return -1;
+	}
+
+	*v |= val << shift;
+	return 0;
+}
+
+int calc_tacp(unsigned int cyc, unsigned long hclk, unsigned long *v)
+{
+	/* Currently no support for Tacp calculations. */
+	return 0;
+}
+
+/**
+ * calc_tacc - calculate divisor control for tacc.
+ * @cyc: The cycle time, in 10ths of nanoseconds.
+ * @nwait_en: IS nWAIT enabled for this bank.
+ * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
+ * @v: Pointer to register to alter.
+ *
+ * Calculate the divisor control for tACC, taking into account whether
+ * the bank has nWAIT enabled. The result is used to modify the value
+ * pointed to by @v.
+*/
+static int calc_tacc(unsigned int cyc, int nwait_en,
+		     unsigned long hclk_tns, unsigned long *v)
+{
+	unsigned int div = to_div(cyc, hclk_tns);
+	unsigned long val;
+
+	s3c_freq_iodbg("%s: cyc=%u, nwait=%d, hclk=%lu => div=%u\n",
+		       __func__, cyc, nwait_en, hclk_tns, div);
+
+	/* if nWait enabled on an bank, Tacc must be at-least 4 cycles. */
+	if (nwait_en && div < 4)
+		div = 4;
+
+	switch (div) {
+	case 0:
+		val = 0;
+		break;
+
+	case 1:
+	case 2:
+	case 3:
+	case 4:
+		val = div - 1;
+		break;
+
+	case 5:
+	case 6:
+		val = 4;
+		break;
+
+	case 7:
+	case 8:
+		val = 5;
+		break;
+
+	case 9:
+	case 10:
+		val = 6;
+		break;
+
+	case 11:
+	case 12:
+	case 13:
+	case 14:
+		val = 7;
+		break;
+
+	default:
+		return -1;
+	}
+
+	*v |= val << 8;
+	return 0;
+}
+
+/**
+ * s3c2410_calc_bank - calculate bank timing infromation
+ * @cfg: The configuration we need to calculate for.
+ * @bt: The bank timing information.
+ *
+ * Given the cycle timine for a bank @bt, calculate the new BANKCON
+ * setting for the @cfg timing. This updates the timing information
+ * ready for the cpu frequency change.
+ */
+static int s3c2410_calc_bank(struct s3c_cpufreq_config *cfg,
+			     struct s3c2410_iobank_timing *bt)
+{
+	unsigned long hclk = cfg->freq.hclk_tns;
+	unsigned long res;
+	int ret;
+
+	res  = bt->bankcon;
+	res &= (S3C2410_BANKCON_SDRAM | S3C2410_BANKCON_PMC16);
+
+	/* tacp: 2,3,4,5 */
+	/* tcah: 0,1,2,4 */
+	/* tcoh: 0,1,2,4 */
+	/* tacc: 1,2,3,4,6,7,10,14 (>4 for nwait) */
+	/* tcos: 0,1,2,4 */
+	/* tacs: 0,1,2,4 */
+
+	ret  = calc_0124(bt->tacs, hclk, &res, S3C2410_BANKCON_Tacs_SHIFT);
+	ret |= calc_0124(bt->tcos, hclk, &res, S3C2410_BANKCON_Tcos_SHIFT);
+	ret |= calc_0124(bt->tcah, hclk, &res, S3C2410_BANKCON_Tcah_SHIFT);
+	ret |= calc_0124(bt->tcoh, hclk, &res, S3C2410_BANKCON_Tcoh_SHIFT);
+
+	if (ret)
+		return -EINVAL;
+
+	ret |= calc_tacp(bt->tacp, hclk, &res);
+	ret |= calc_tacc(bt->tacc, bt->nwait_en, hclk, &res);
+
+	if (ret)
+		return -EINVAL;
+
+	bt->bankcon = res;
+	return 0;
+}
+
+static unsigned int tacc_tab[] = {
+	[0]	= 1,
+	[1]	= 2,
+	[2]	= 3,
+	[3]	= 4,
+	[4]	= 6,
+	[5]	= 9,
+	[6]	= 10,
+	[7]	= 14,
+};
+
+/**
+ * get_tacc - turn tACC value into cycle time
+ * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
+ * @val: The bank timing register value, shifed down.
+ */
+static unsigned int get_tacc(unsigned long hclk_tns,
+			     unsigned long val)
+{
+	val &= 7;
+	return hclk_tns * tacc_tab[val];
+}
+
+/**
+ * get_0124 - turn 0/1/2/4 divider into cycle time
+ * @hclk_tns: The cycle time for HCLK, in 10ths of nanoseconds.
+ * @val: The bank timing register value, shifed down.
+ */
+static unsigned int get_0124(unsigned long hclk_tns,
+			     unsigned long val)
+{
+	val &= 3;
+	return hclk_tns * ((val == 3) ? 4 : val);
+}
+
+/**
+ * s3c2410_iotiming_getbank - turn BANKCON into cycle time information
+ * @cfg: The frequency configuration
+ * @bt: The bank timing to fill in (uses cached BANKCON)
+ *
+ * Given the BANKCON setting in @bt and the current frequency settings
+ * in @cfg, update the cycle timing information.
+ */
+void s3c2410_iotiming_getbank(struct s3c_cpufreq_config *cfg,
+			      struct s3c2410_iobank_timing *bt)
+{
+	unsigned long bankcon = bt->bankcon;
+	unsigned long hclk = cfg->freq.hclk_tns;
+
+	bt->tcah = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcah_SHIFT);
+	bt->tcoh = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcoh_SHIFT);
+	bt->tcos = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcos_SHIFT);
+	bt->tacs = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tacs_SHIFT);
+	bt->tacc = get_tacc(hclk, bankcon >> S3C2410_BANKCON_Tacc_SHIFT);
+}
+
+/**
+ * s3c2410_iotiming_calc - Calculate bank timing for frequency change.
+ * @cfg: The frequency configuration
+ * @iot: The IO timing information to fill out.
+ *
+ * Calculate the new values for the banks in @iot based on the new
+ * frequency information in @cfg. This is then used by s3c2410_iotiming_set()
+ * to update the timing when necessary.
+ */
+int s3c2410_iotiming_calc(struct s3c_cpufreq_config *cfg,
+			  struct s3c_iotimings *iot)
+{
+	struct s3c2410_iobank_timing *bt;
+	unsigned long bankcon;
+	int bank;
+	int ret;
+
+	for (bank = 0; bank < MAX_BANKS; bank++) {
+		bankcon = __raw_readl(bank_reg(bank));
+		bt = iot->bank[bank].io_2410;
+
+		if (!bt)
+			continue;
+
+		bt->bankcon = bankcon;
+
+		ret = s3c2410_calc_bank(cfg, bt);
+		if (ret) {
+			printk(KERN_ERR "%s: cannot calculate bank %d io\n",
+			       __func__, bank);
+			goto err;
+		}
+
+		s3c_freq_iodbg("%s: bank %d: con=%08lx\n",
+			       __func__, bank, bt->bankcon);
+	}
+
+	return 0;
+ err:
+	return ret;
+}
+
+/**
+ * s3c2410_iotiming_set - set the IO timings from the given setup.
+ * @cfg: The frequency configuration
+ * @iot: The IO timing information to use.
+ *
+ * Set all the currently used IO bank timing information generated
+ * by s3c2410_iotiming_calc() once the core has validated that all
+ * the new values are within permitted bounds.
+ */
+void s3c2410_iotiming_set(struct s3c_cpufreq_config *cfg,
+			  struct s3c_iotimings *iot)
+{
+	struct s3c2410_iobank_timing *bt;
+	int bank;
+
+	/* set the io timings from the specifier */
+
+	for (bank = 0; bank < MAX_BANKS; bank++) {
+		bt = iot->bank[bank].io_2410;
+		if (!bt)
+			continue;
+
+		__raw_writel(bt->bankcon, bank_reg(bank));
+	}
+}
+
+/**
+ * s3c2410_iotiming_get - Get the timing information from current registers.
+ * @cfg: The frequency configuration
+ * @timings: The IO timing information to fill out.
+ *
+ * Calculate the @timings timing information from the current frequency
+ * information in @cfg, and the new frequency configur
+ * through all the IO banks, reading the state and then updating @iot
+ * as necessary.
+ *
+ * This is used at the moment on initialisation to get the current
+ * configuration so that boards do not have to carry their own setup
+ * if the timings are correct on initialisation.
+ */
+
+int s3c2410_iotiming_get(struct s3c_cpufreq_config *cfg,
+			 struct s3c_iotimings *timings)
+{
+	struct s3c2410_iobank_timing *bt;
+	unsigned long bankcon;
+	unsigned long bwscon;
+	int bank;
+
+	bwscon = __raw_readl(S3C2410_BWSCON);
+
+	/* look through all banks to see what is currently set. */
+
+	for (bank = 0; bank < MAX_BANKS; bank++) {
+		bankcon = __raw_readl(bank_reg(bank));
+
+		if (!bank_is_io(bankcon))
+			continue;
+
+		s3c_freq_iodbg("%s: bank %d: con %08lx\n",
+			       __func__, bank, bankcon);
+
+		bt = kzalloc(sizeof(struct s3c2410_iobank_timing), GFP_KERNEL);
+		if (!bt) {
+			printk(KERN_ERR "%s: no memory for bank\n", __func__);
+			return -ENOMEM;
+		}
+
+		/* find out in nWait is enabled for bank. */
+
+		if (bank != 0) {
+			unsigned long tmp  = S3C2410_BWSCON_GET(bwscon, bank);
+			if (tmp & S3C2410_BWSCON_WS)
+				bt->nwait_en = 1;
+		}
+
+		timings->bank[bank].io_2410 = bt;
+		bt->bankcon = bankcon;
+
+		s3c2410_iotiming_getbank(cfg, bt);
+	}
+
+	s3c2410_print_timing("get", timings);
+	return 0;
+}
-- 
cgit v1.2.3


From a24c091db988551e2c350cfde9eb80ab6e791ffb Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:27 +0100
Subject: ARM: S3C2410: CPUFREQ: Add core support.

Add core support for frequency scaling on the S3C2410 SoC.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2410/Kconfig                 |  11 ++
 arch/arm/mach-s3c2410/Makefile                |   1 +
 arch/arm/mach-s3c2410/cpu-freq.c              | 157 ++++++++++++++++++++++++++
 arch/arm/plat-s3c24xx/Kconfig                 |   7 ++
 arch/arm/plat-s3c24xx/Makefile                |   1 +
 arch/arm/plat-s3c24xx/s3c2410-cpufreq-utils.c |  64 +++++++++++
 6 files changed, 241 insertions(+)
 create mode 100644 arch/arm/mach-s3c2410/cpu-freq.c
 create mode 100644 arch/arm/plat-s3c24xx/s3c2410-cpufreq-utils.c

(limited to 'arch')

diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index 41bb65d5b91..a7f70e18ccb 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -12,6 +12,7 @@ config CPU_S3C2410
 	select S3C2410_GPIO
 	select CPU_LLSERIAL_S3C2410
 	select S3C2410_PM if PM
+	select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX
 	help
 	  Support for S3C2410 and S3C2410A family from the S3C24XX line
 	  of Samsung Mobile CPUs.
@@ -45,6 +46,15 @@ config MACH_BAST_IDE
 	  Internal node for machines with an BAST style IDE
 	  interface
 
+# cpu frequency scaling support
+
+config S3C2410_CPUFREQ
+	bool
+	depends on CPU_FREQ_S3C24XX && CPU_S3C2410
+	select S3C2410_CPUFREQ_UTILS
+	help
+	  CPU Frequency scaling support for S3C2410
+
 menu "S3C2410 Machines"
 
 config ARCH_SMDK2410
@@ -79,6 +89,7 @@ config MACH_N30
 config ARCH_BAST
 	bool "Simtec Electronics BAST (EB2410ITX)"
 	select CPU_S3C2410
+	select S3C2410_IOTIMING if S3C2410_CPUFREQ
 	select PM_SIMTEC if PM
 	select SIMTEC_NOR
 	select MACH_BAST_IDE
diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile
index fca02f82711..cc25eb0eb2c 100644
--- a/arch/arm/mach-s3c2410/Makefile
+++ b/arch/arm/mach-s3c2410/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_CPU_S3C2410_DMA)	+= dma.o
 obj-$(CONFIG_CPU_S3C2410_DMA)	+= dma.o
 obj-$(CONFIG_S3C2410_PM)	+= pm.o sleep.o
 obj-$(CONFIG_S3C2410_GPIO)	+= gpio.o
+obj-$(CONFIG_S3C2410_CPUFREQ)	+= cpu-freq.o
 
 # Machine support
 
diff --git a/arch/arm/mach-s3c2410/cpu-freq.c b/arch/arm/mach-s3c2410/cpu-freq.c
new file mode 100644
index 00000000000..f2cbdbab0df
--- /dev/null
+++ b/arch/arm/mach-s3c2410/cpu-freq.c
@@ -0,0 +1,157 @@
+/* linux/arch/arm/mach-s3c2410/cpu-freq.c
+ *
+ * Copyright (c) 2006,2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 CPU Frequency scaling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/cpufreq.h>
+#include <linux/sysdev.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/regs-clock.h>
+
+#include <plat/cpu.h>
+#include <plat/clock.h>
+#include <plat/cpu-freq-core.h>
+
+/* Note, 2410A has an extra mode for 1:4:4 ratio, bit 2 of CLKDIV */
+
+static void s3c2410_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
+{
+	u32 clkdiv = 0;
+
+	if (cfg->divs.h_divisor == 2)
+		clkdiv |= S3C2410_CLKDIVN_HDIVN;
+
+	if (cfg->divs.p_divisor != cfg->divs.h_divisor)
+		clkdiv |= S3C2410_CLKDIVN_PDIVN;
+
+	__raw_writel(clkdiv, S3C2410_CLKDIVN);
+}
+
+static int s3c2410_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
+{
+	unsigned long hclk, fclk, pclk;
+	unsigned int hdiv, pdiv;
+	unsigned long hclk_max;
+
+	fclk = cfg->freq.fclk;
+	hclk_max = cfg->max.hclk;
+
+	cfg->freq.armclk = fclk;
+
+	s3c_freq_dbg("%s: fclk is %lu, max hclk %lu\n",
+		      __func__, fclk, hclk_max);
+
+	hdiv = (fclk > cfg->max.hclk) ? 2 : 1;
+	hclk = fclk / hdiv;
+
+	if (hclk > cfg->max.hclk) {
+		s3c_freq_dbg("%s: hclk too big\n", __func__);
+		return -EINVAL;
+	}
+
+	pdiv = (hclk > cfg->max.pclk) ? 2 : 1;
+	pclk = hclk / pdiv;
+
+	if (pclk > cfg->max.pclk) {
+		s3c_freq_dbg("%s: pclk too big\n", __func__);
+		return -EINVAL;
+	}
+
+	pdiv *= hdiv;
+
+	/* record the result */
+	cfg->divs.p_divisor = pdiv;
+	cfg->divs.h_divisor = hdiv;
+
+	return 0      ;
+}
+
+static struct s3c_cpufreq_info s3c2410_cpufreq_info = {
+	.max		= {
+		.fclk	= 200000000,
+		.hclk	= 100000000,
+		.pclk	=  50000000,
+	},
+
+	/* transition latency is about 5ms worst-case, so
+	 * set 10ms to be sure */
+	.latency	= 10000000,
+
+	.locktime_m	= 150,
+	.locktime_u	= 150,
+	.locktime_bits	= 12,
+
+	.need_pll	= 1,
+
+	.name		= "s3c2410",
+	.calc_iotiming	= s3c2410_iotiming_calc,
+	.set_iotiming	= s3c2410_iotiming_set,
+	.get_iotiming	= s3c2410_iotiming_get,
+	.resume_clocks	= s3c2410_setup_clocks,
+
+	.set_fvco	= s3c2410_set_fvco,
+	.set_refresh	= s3c2410_cpufreq_setrefresh,
+	.set_divs	= s3c2410_cpufreq_setdivs,
+	.calc_divs	= s3c2410_cpufreq_calcdivs,
+};
+
+static int s3c2410_cpufreq_add(struct sys_device *sysdev)
+{
+	return s3c_cpufreq_register(&s3c2410_cpufreq_info);
+}
+
+static struct sysdev_driver s3c2410_cpufreq_driver = {
+	.add		= s3c2410_cpufreq_add,
+};
+
+static int __init s3c2410_cpufreq_init(void)
+{
+	return sysdev_driver_register(&s3c2410_sysclass,
+				      &s3c2410_cpufreq_driver);
+}
+
+arch_initcall(s3c2410_cpufreq_init);
+
+static int s3c2410a_cpufreq_add(struct sys_device *sysdev)
+{
+	/* alter the maximum freq settings for S3C2410A. If a board knows
+	 * it only has a maximum of 200, then it should register its own
+	 * limits. */
+
+	s3c2410_cpufreq_info.max.fclk = 266000000;
+	s3c2410_cpufreq_info.max.hclk = 133000000;
+	s3c2410_cpufreq_info.max.pclk =  66500000;
+	s3c2410_cpufreq_info.name = "s3c2410a";
+
+	return s3c2410_cpufreq_add(sysdev);
+}
+
+static struct sysdev_driver s3c2410a_cpufreq_driver = {
+	.add		= s3c2410a_cpufreq_add,
+};
+
+static int __init s3c2410a_cpufreq_init(void)
+{
+	return sysdev_driver_register(&s3c2410a_sysclass,
+				      &s3c2410a_cpufreq_driver);
+}
+
+arch_initcall(s3c2410a_cpufreq_init);
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index d82d30c2f05..a547c79ed6c 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -116,6 +116,13 @@ config S3C2410_IOTIMING
 	  Internal node to select io timing code that is common to the s3c2410
 	  and s3c2440/s3c2442 cpu frequency support.
 
+config S3C2410_CPUFREQ_UTILS
+	bool
+	depends on CPU_FREQ_S3C24XX
+	help
+	  Internal node to select timing code that is common to the s3c2410
+	  and s3c2440/s3c244 cpu frequency support.
+
 config MACH_SMDK
 	bool
 	help
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index 6f9afd13ab4..b28fe9cb0e5 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -36,6 +36,7 @@ obj-$(CONFIG_S3C2410_CLOCK)	+= s3c2410-clock.o
 obj-$(CONFIG_S3C2410_DMA)	+= dma.o
 obj-$(CONFIG_S3C24XX_ADC)	+= adc.o
 obj-$(CONFIG_S3C2410_IOTIMING)	+= s3c2410-iotiming.o
+obj-$(CONFIG_S3C2410_CPUFREQ_UTILS) += s3c2410-cpufreq-utils.o
 
 # device specific setup and/or initialisation
 obj-$(CONFIG_ARCH_S3C2410)	+= setup-i2c.o
diff --git a/arch/arm/plat-s3c24xx/s3c2410-cpufreq-utils.c b/arch/arm/plat-s3c24xx/s3c2410-cpufreq-utils.c
new file mode 100644
index 00000000000..43ea80190d8
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/s3c2410-cpufreq-utils.c
@@ -0,0 +1,64 @@
+/* linux/arch/arm/plat-s3c24xx/s3c2410-cpufreq-utils.c
+ *
+ * Copyright (c) 2009 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX CPU Frequency scaling - utils for S3C2410/S3C2440/S3C2442
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/cpufreq.h>
+#include <linux/io.h>
+
+#include <mach/map.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-clock.h>
+
+#include <plat/cpu-freq-core.h>
+
+/**
+ * s3c2410_cpufreq_setrefresh - set SDRAM refresh value
+ * @cfg: The frequency configuration
+ *
+ * Set the SDRAM refresh value appropriately for the configured
+ * frequency.
+ */
+void s3c2410_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
+{
+	struct s3c_cpufreq_board *board = cfg->board;
+	unsigned long refresh;
+	unsigned long refval;
+
+	/* Reduce both the refresh time (in ns) and the frequency (in MHz)
+	 * down to ensure that we do not overflow 32 bit numbers.
+	 *
+	 * This should work for HCLK up to 133MHz and refresh period up
+	 * to 30usec.
+	 */
+
+	refresh = (cfg->freq.hclk / 100) * (board->refresh / 10);
+	refresh = DIV_ROUND_UP(refresh, (1000 * 1000)); /* apply scale  */
+	refresh = (1 << 11) + 1 - refresh;
+
+	s3c_freq_dbg("%s: refresh value %lu\n", __func__, refresh);
+
+	refval = __raw_readl(S3C2410_REFRESH);
+	refval &= ~((1 << 12) - 1);
+	refval |= refresh;
+	__raw_writel(refval, S3C2410_REFRESH);
+}
+
+/**
+ * s3c2410_set_fvco - set the PLL value
+ * @cfg: The frequency configuration
+ */
+void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg)
+{
+	__raw_writel(cfg->pll.index, S3C2410_MPLLCON);
+}
-- 
cgit v1.2.3


From 438a09e1eb01c3f0d4cddde97ed9caae652f910b Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:28 +0100
Subject: ARM: S3C2410: CPUFREQ: Add PLL table

Add PLL table for the S3C2410 SoC.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2410/Kconfig  |  7 ++++
 arch/arm/mach-s3c2410/Makefile |  1 +
 arch/arm/mach-s3c2410/pll.c    | 95 ++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 103 insertions(+)
 create mode 100644 arch/arm/mach-s3c2410/pll.c

(limited to 'arch')

diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index a7f70e18ccb..d8c023d4df3 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -55,6 +55,13 @@ config S3C2410_CPUFREQ
 	help
 	  CPU Frequency scaling support for S3C2410
 
+config S3C2410_PLLTABLE
+	bool
+	depends on S3C2410_CPUFREQ && CPU_FREQ_S3C24XX_PLL
+	default y
+	help
+	  Select the PLL table for the S3C2410
+
 menu "S3C2410 Machines"
 
 config ARCH_SMDK2410
diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile
index cc25eb0eb2c..2ab5ba4b266 100644
--- a/arch/arm/mach-s3c2410/Makefile
+++ b/arch/arm/mach-s3c2410/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_CPU_S3C2410_DMA)	+= dma.o
 obj-$(CONFIG_S3C2410_PM)	+= pm.o sleep.o
 obj-$(CONFIG_S3C2410_GPIO)	+= gpio.o
 obj-$(CONFIG_S3C2410_CPUFREQ)	+= cpu-freq.o
+obj-$(CONFIG_S3C2410_PLLTABLE)	+= pll.o
 
 # Machine support
 
diff --git a/arch/arm/mach-s3c2410/pll.c b/arch/arm/mach-s3c2410/pll.c
new file mode 100644
index 00000000000..f178c2fd9d8
--- /dev/null
+++ b/arch/arm/mach-s3c2410/pll.c
@@ -0,0 +1,95 @@
+/* arch/arm/mach-s3c2410/pll.c
+ *
+ * Copyright (c) 2006,2007 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	Vincent Sanders <vince@arm.linux.org.uk>
+ *
+ * S3C2410 CPU PLL tables
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/sysdev.h>
+#include <linux/list.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <plat/cpu.h>
+#include <plat/cpu-freq-core.h>
+
+static struct cpufreq_frequency_table pll_vals_12MHz[] = {
+    { .frequency = 34000000,  .index = PLLVAL(82, 2, 3),   },
+    { .frequency = 45000000,  .index = PLLVAL(82, 1, 3),   },
+    { .frequency = 51000000,  .index = PLLVAL(161, 3, 3),  },
+    { .frequency = 48000000,  .index = PLLVAL(120, 2, 3),  },
+    { .frequency = 56000000,  .index = PLLVAL(142, 2, 3),  },
+    { .frequency = 68000000,  .index = PLLVAL(82, 2, 2),   },
+    { .frequency = 79000000,  .index = PLLVAL(71, 1, 2),   },
+    { .frequency = 85000000,  .index = PLLVAL(105, 2, 2),  },
+    { .frequency = 90000000,  .index = PLLVAL(112, 2, 2),  },
+    { .frequency = 101000000, .index = PLLVAL(127, 2, 2),  },
+    { .frequency = 113000000, .index = PLLVAL(105, 1, 2),  },
+    { .frequency = 118000000, .index = PLLVAL(150, 2, 2),  },
+    { .frequency = 124000000, .index = PLLVAL(116, 1, 2),  },
+    { .frequency = 135000000, .index = PLLVAL(82, 2, 1),   },
+    { .frequency = 147000000, .index = PLLVAL(90, 2, 1),   },
+    { .frequency = 152000000, .index = PLLVAL(68, 1, 1),   },
+    { .frequency = 158000000, .index = PLLVAL(71, 1, 1),   },
+    { .frequency = 170000000, .index = PLLVAL(77, 1, 1),   },
+    { .frequency = 180000000, .index = PLLVAL(82, 1, 1),   },
+    { .frequency = 186000000, .index = PLLVAL(85, 1, 1),   },
+    { .frequency = 192000000, .index = PLLVAL(88, 1, 1),   },
+    { .frequency = 203000000, .index = PLLVAL(161, 3, 1),  },
+
+    /* 2410A extras */
+
+    { .frequency = 210000000, .index = PLLVAL(132, 2, 1),  },
+    { .frequency = 226000000, .index = PLLVAL(105, 1, 1),  },
+    { .frequency = 266000000, .index = PLLVAL(125, 1, 1),  },
+    { .frequency = 268000000, .index = PLLVAL(126, 1, 1),  },
+    { .frequency = 270000000, .index = PLLVAL(127, 1, 1),  },
+};
+
+static int s3c2410_plls_add(struct sys_device *dev)
+{
+	return s3c_plltab_register(pll_vals_12MHz, ARRAY_SIZE(pll_vals_12MHz));
+}
+
+static struct sysdev_driver s3c2410_plls_drv = {
+	.add	= s3c2410_plls_add,
+};
+
+static int __init s3c2410_pll_init(void)
+{
+	return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_plls_drv);
+
+}
+
+arch_initcall(s3c2410_pll_init);
+
+static struct sysdev_driver s3c2410a_plls_drv = {
+	.add	= s3c2410_plls_add,
+};
+
+static int __init s3c2410a_pll_init(void)
+{
+	return sysdev_driver_register(&s3c2410a_sysclass, &s3c2410a_plls_drv);
+}
+
+arch_initcall(s3c2410a_pll_init);
-- 
cgit v1.2.3


From 342e20f10294aca4097ae2a056c72a202221a75f Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:29 +0100
Subject: ARM: S3C2440: CPUFREQ: Add core support.

Add core support for frequency scaling on the S3C2440 SoC.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c24xx/Kconfig           |   8 +
 arch/arm/plat-s3c24xx/Makefile          |   1 +
 arch/arm/plat-s3c24xx/s3c2440-cpufreq.c | 309 ++++++++++++++++++++++++++++++++
 3 files changed, 318 insertions(+)
 create mode 100644 arch/arm/plat-s3c24xx/s3c2440-cpufreq.c

(limited to 'arch')

diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index a547c79ed6c..feb9db8886b 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -34,6 +34,14 @@ config CPU_S3C244X
 	help
 	  Support for S3C2440 and S3C2442 Samsung Mobile CPU based systems.
 
+config S3C2440_CPUFREQ
+	bool "S3C2440/S3C2442 CPU Frequency scaling support"
+	depends on CPU_FREQ_S3C24XX && (CPU_S3C2440 || CPU_S3C2442)
+	select S3C2410_CPUFREQ_UTILS
+	default y
+	help
+	  CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs.
+
 config S3C24XX_PWM
 	bool "PWM device support"
 	select HAVE_PWM
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index b28fe9cb0e5..b73f2e17b16 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -27,6 +27,7 @@ obj-$(CONFIG_CPU_FREQ_S3C24XX)	+= cpu-freq.o
 obj-$(CONFIG_CPU_S3C244X)	+= s3c244x.o
 obj-$(CONFIG_CPU_S3C244X)	+= s3c244x-irq.o
 obj-$(CONFIG_CPU_S3C244X)	+= s3c244x-clock.o
+obj-$(CONFIG_S3C2440_CPUFREQ)	+= s3c2440-cpufreq.o
 obj-$(CONFIG_PM_SIMTEC)		+= pm-simtec.o
 obj-$(CONFIG_PM)		+= pm.o
 obj-$(CONFIG_PM)		+= irq-pm.o
diff --git a/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c b/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c
new file mode 100644
index 00000000000..c177a20319e
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c
@@ -0,0 +1,309 @@
+/* linux/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c
+ *
+ * Copyright (c) 2006,2008,2009 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	Vincent Sanders <vince@simtec.co.uk>
+ *
+ * S3C2440/S3C2442 CPU Frequency scaling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/cpufreq.h>
+#include <linux/sysdev.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/regs-clock.h>
+
+#include <plat/cpu.h>
+#include <plat/cpu-freq-core.h>
+#include <plat/clock.h>
+
+static struct clk *xtal;
+static struct clk *fclk;
+static struct clk *hclk;
+static struct clk *armclk;
+
+/* HDIV: 1, 2, 3, 4, 6, 8 */
+
+static inline int within_khz(unsigned long a, unsigned long b)
+{
+	long diff = a - b;
+
+	return (diff >= -1000 && diff <= 1000);
+}
+
+/**
+ * s3c2440_cpufreq_calcdivs - calculate divider settings
+ * @cfg: The cpu frequency settings.
+ *
+ * Calcualte the divider values for the given frequency settings
+ * specified in @cfg. The values are stored in @cfg for later use
+ * by the relevant set routine if the request settings can be reached.
+ */
+int s3c2440_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
+{
+	unsigned int hdiv, pdiv;
+	unsigned long hclk, fclk, armclk;
+	unsigned long hclk_max;
+
+	fclk = cfg->freq.fclk;
+	armclk = cfg->freq.armclk;
+	hclk_max = cfg->max.hclk;
+
+	s3c_freq_dbg("%s: fclk is %lu, armclk %lu, max hclk %lu\n",
+		     __func__, fclk, armclk, hclk_max);
+
+	if (armclk > fclk) {
+		printk(KERN_WARNING "%s: armclk > fclk\n", __func__);
+		armclk = fclk;
+	}
+
+	/* if we are in DVS, we need HCLK to be <= ARMCLK */
+	if (armclk < fclk && armclk < hclk_max)
+		hclk_max = armclk;
+
+	for (hdiv = 1; hdiv < 9; hdiv++) {
+		if (hdiv == 5 || hdiv == 7)
+			hdiv++;
+
+		hclk = (fclk / hdiv);
+		if (hclk <= hclk_max || within_khz(hclk, hclk_max))
+			break;
+	}
+
+	s3c_freq_dbg("%s: hclk %lu, div %d\n", __func__, hclk, hdiv);
+
+	if (hdiv > 8)
+		goto invalid;
+
+	pdiv = (hclk > cfg->max.pclk) ? 2 : 1;
+
+	if ((hclk / pdiv) > cfg->max.pclk)
+		pdiv++;
+
+	s3c_freq_dbg("%s: pdiv %d\n", __func__, pdiv);
+
+	if (pdiv > 2)
+		goto invalid;
+
+	pdiv *= hdiv;
+
+	/* calculate a valid armclk */
+
+	if (armclk < hclk)
+		armclk = hclk;
+
+	/* if we're running armclk lower than fclk, this really means
+	 * that the system should go into dvs mode, which means that
+	 * armclk is connected to hclk. */
+	if (armclk < fclk) {
+		cfg->divs.dvs = 1;
+		armclk = hclk;
+	} else
+		cfg->divs.dvs = 0;
+
+	cfg->freq.armclk = armclk;
+
+	/* store the result, and then return */
+
+	cfg->divs.h_divisor = hdiv;
+	cfg->divs.p_divisor = pdiv;
+
+	return 0;
+
+ invalid:
+	return -EINVAL;
+}
+
+#define CAMDIVN_HCLK_HALF (S3C2440_CAMDIVN_HCLK3_HALF | \
+			   S3C2440_CAMDIVN_HCLK4_HALF)
+
+/**
+ * s3c2440_cpufreq_setdivs - set the cpu frequency divider settings
+ * @cfg: The cpu frequency settings.
+ *
+ * Set the divisors from the settings in @cfg, which where generated
+ * during the calculation phase by s3c2440_cpufreq_calcdivs().
+ */
+static void s3c2440_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
+{
+	unsigned long clkdiv, camdiv;
+
+	s3c_freq_dbg("%s: divsiors: h=%d, p=%d\n", __func__,
+		     cfg->divs.h_divisor, cfg->divs.p_divisor);
+
+	clkdiv = __raw_readl(S3C2410_CLKDIVN);
+	camdiv = __raw_readl(S3C2440_CAMDIVN);
+
+	clkdiv &= ~(S3C2440_CLKDIVN_HDIVN_MASK | S3C2440_CLKDIVN_PDIVN);
+	camdiv &= ~CAMDIVN_HCLK_HALF;
+
+	switch (cfg->divs.h_divisor) {
+	case 1:
+		clkdiv |= S3C2440_CLKDIVN_HDIVN_1;
+		break;
+
+	case 2:
+		clkdiv |= S3C2440_CLKDIVN_HDIVN_2;
+		break;
+
+	case 6:
+		camdiv |= S3C2440_CAMDIVN_HCLK3_HALF;
+	case 3:
+		clkdiv |= S3C2440_CLKDIVN_HDIVN_3_6;
+		break;
+
+	case 8:
+		camdiv |= S3C2440_CAMDIVN_HCLK4_HALF;
+	case 4:
+		clkdiv |= S3C2440_CLKDIVN_HDIVN_4_8;
+		break;
+
+	default:
+		BUG();	/* we don't expect to get here. */
+	}
+
+	if (cfg->divs.p_divisor != cfg->divs.h_divisor)
+		clkdiv |= S3C2440_CLKDIVN_PDIVN;
+
+	/* todo - set pclk. */
+
+	/* Write the divisors first with hclk intentionally halved so that
+	 * when we write clkdiv we will under-frequency instead of over. We
+	 * then make a short delay and remove the hclk halving if necessary.
+	 */
+
+	__raw_writel(camdiv | CAMDIVN_HCLK_HALF, S3C2440_CAMDIVN);
+	__raw_writel(clkdiv, S3C2410_CLKDIVN);
+
+	ndelay(20);
+	__raw_writel(camdiv, S3C2440_CAMDIVN);
+
+	clk_set_parent(armclk, cfg->divs.dvs ? hclk : fclk);
+}
+
+static int run_freq_for(unsigned long max_hclk, unsigned long fclk,
+			int *divs,
+			struct cpufreq_frequency_table *table,
+			size_t table_size)
+{
+	unsigned long freq;
+	int index = 0;
+	int div;
+
+	for (div = *divs; div > 0; div = *divs++) {
+		freq = fclk / div;
+
+		if (freq > max_hclk && div != 1)
+			continue;
+
+		freq /= 1000; /* table is in kHz */
+		index = s3c_cpufreq_addfreq(table, index, table_size, freq);
+		if (index < 0)
+			break;
+	}
+
+	return index;
+}
+
+static int hclk_divs[] = { 1, 2, 3, 4, 6, 8, -1 };
+
+static int s3c2440_cpufreq_calctable(struct s3c_cpufreq_config *cfg,
+				     struct cpufreq_frequency_table *table,
+				     size_t table_size)
+{
+	int ret;
+
+	WARN_ON(cfg->info == NULL);
+	WARN_ON(cfg->board == NULL);
+
+	ret = run_freq_for(cfg->info->max.hclk,
+			   cfg->info->max.fclk,
+			   hclk_divs,
+			   table, table_size);
+
+	s3c_freq_dbg("%s: returning %d\n", __func__, ret);
+
+	return ret;
+}
+
+struct s3c_cpufreq_info s3c2440_cpufreq_info = {
+	.max		= {
+		.fclk	= 400000000,
+		.hclk	= 133333333,
+		.pclk	=  66666666,
+	},
+
+	.locktime_m	= 300,
+	.locktime_u	= 300,
+	.locktime_bits	= 16,
+
+	.name		= "s3c244x",
+	.calc_iotiming	= s3c2410_iotiming_calc,
+	.set_iotiming	= s3c2410_iotiming_set,
+	.get_iotiming	= s3c2410_iotiming_get,
+	.set_fvco	= s3c2410_set_fvco,
+
+	.set_refresh	= s3c2410_cpufreq_setrefresh,
+	.set_divs	= s3c2440_cpufreq_setdivs,
+	.calc_divs	= s3c2440_cpufreq_calcdivs,
+	.calc_freqtable	= s3c2440_cpufreq_calctable,
+
+	.resume_clocks	= s3c244x_setup_clocks,
+};
+
+static int s3c2440_cpufreq_add(struct sys_device *sysdev)
+{
+	xtal = s3c_cpufreq_clk_get(NULL, "xtal");
+	hclk = s3c_cpufreq_clk_get(NULL, "hclk");
+	fclk = s3c_cpufreq_clk_get(NULL, "fclk");
+	armclk = s3c_cpufreq_clk_get(NULL, "armclk");
+
+	if (IS_ERR(xtal) || IS_ERR(hclk) || IS_ERR(fclk) || IS_ERR(armclk)) {
+		printk(KERN_ERR "%s: failed to get clocks\n", __func__);
+		return -ENOENT;
+	}
+
+	return s3c_cpufreq_register(&s3c2440_cpufreq_info);
+}
+
+static struct sysdev_driver s3c2440_cpufreq_driver = {
+	.add		= s3c2440_cpufreq_add,
+};
+
+static int s3c2440_cpufreq_init(void)
+{
+	return sysdev_driver_register(&s3c2440_sysclass,
+				      &s3c2440_cpufreq_driver);
+}
+
+/* arch_initcall adds the clocks we need, so use subsys_initcall. */
+subsys_initcall(s3c2440_cpufreq_init);
+
+static struct sysdev_driver s3c2442_cpufreq_driver = {
+	.add		= s3c2440_cpufreq_add,
+};
+
+static int s3c2442_cpufreq_init(void)
+{
+	return sysdev_driver_register(&s3c2442_sysclass,
+				      &s3c2442_cpufreq_driver);
+}
+
+subsys_initcall(s3c2442_cpufreq_init);
-- 
cgit v1.2.3


From 78278d6a9673b487d8229dd430cacdf9964c0d3f Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:30 +0100
Subject: ARM: S3C2440: CPUFREQ: Add PLL tables

Add PLL tables for the S3C2440.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c24xx/Kconfig                |  14 +++
 arch/arm/plat-s3c24xx/Makefile               |   3 +
 arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c |  97 ++++++++++++++++++++
 arch/arm/plat-s3c24xx/s3c2440-pll-16934400.c | 127 +++++++++++++++++++++++++++
 4 files changed, 241 insertions(+)
 create mode 100644 arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c
 create mode 100644 arch/arm/plat-s3c24xx/s3c2440-pll-16934400.c

(limited to 'arch')

diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index feb9db8886b..9c449c048c7 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -42,6 +42,20 @@ config S3C2440_CPUFREQ
 	help
 	  CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs.
 
+config S3C2440_PLL_12000000
+	bool
+	depends on S3C2440_CPUFREQ
+	default y if CPU_FREQ_S3C24XX_PLL
+	help
+	  PLL tables for S3C2440 or S3C2442 CPUs with 12MHz crystals.
+
+config S3C2440_PLL_16934400
+	bool
+	depends on S3C2440_CPUFREQ
+	default y if CPU_FREQ_S3C24XX_PLL
+	help
+	  PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals.
+
 config S3C24XX_PWM
 	bool "PWM device support"
 	select HAVE_PWM
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index b73f2e17b16..c60317b3491 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -28,6 +28,9 @@ obj-$(CONFIG_CPU_S3C244X)	+= s3c244x.o
 obj-$(CONFIG_CPU_S3C244X)	+= s3c244x-irq.o
 obj-$(CONFIG_CPU_S3C244X)	+= s3c244x-clock.o
 obj-$(CONFIG_S3C2440_CPUFREQ)	+= s3c2440-cpufreq.o
+obj-$(CONFIG_S3C2440_PLL_12000000) += s3c2440-pll-12000000.o
+obj-$(CONFIG_S3C2440_PLL_16934400) += s3c2440-pll-16934400.o
+
 obj-$(CONFIG_PM_SIMTEC)		+= pm-simtec.o
 obj-$(CONFIG_PM)		+= pm.o
 obj-$(CONFIG_PM)		+= irq-pm.o
diff --git a/arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c b/arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c
new file mode 100644
index 00000000000..ff9443b233a
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c
@@ -0,0 +1,97 @@
+/* arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c
+ *
+ * Copyright (c) 2006,2007 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	Vincent Sanders <vince@arm.linux.org.uk>
+ *
+ * S3C2440/S3C2442 CPU PLL tables (12MHz Crystal)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/sysdev.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <plat/cpu.h>
+#include <plat/cpu-freq-core.h>
+
+static struct cpufreq_frequency_table s3c2440_plls_12[] __initdata = {
+	{ .frequency = 75000000,	.index = PLLVAL(0x75, 3, 3),  }, 	/* FVco 600.000000 */
+	{ .frequency = 80000000,	.index = PLLVAL(0x98, 4, 3),  }, 	/* FVco 640.000000 */
+	{ .frequency = 90000000,	.index = PLLVAL(0x70, 2, 3),  }, 	/* FVco 720.000000 */
+	{ .frequency = 100000000,	.index = PLLVAL(0x5c, 1, 3),  }, 	/* FVco 800.000000 */
+	{ .frequency = 110000000,	.index = PLLVAL(0x66, 1, 3),  }, 	/* FVco 880.000000 */
+	{ .frequency = 120000000,	.index = PLLVAL(0x70, 1, 3),  }, 	/* FVco 960.000000 */
+	{ .frequency = 150000000,	.index = PLLVAL(0x75, 3, 2),  }, 	/* FVco 600.000000 */
+	{ .frequency = 160000000,	.index = PLLVAL(0x98, 4, 2),  }, 	/* FVco 640.000000 */
+	{ .frequency = 170000000,	.index = PLLVAL(0x4d, 1, 2),  }, 	/* FVco 680.000000 */
+	{ .frequency = 180000000,	.index = PLLVAL(0x70, 2, 2),  }, 	/* FVco 720.000000 */
+	{ .frequency = 190000000,	.index = PLLVAL(0x57, 1, 2),  }, 	/* FVco 760.000000 */
+	{ .frequency = 200000000,	.index = PLLVAL(0x5c, 1, 2),  }, 	/* FVco 800.000000 */
+	{ .frequency = 210000000,	.index = PLLVAL(0x84, 2, 2),  }, 	/* FVco 840.000000 */
+	{ .frequency = 220000000,	.index = PLLVAL(0x66, 1, 2),  }, 	/* FVco 880.000000 */
+	{ .frequency = 230000000,	.index = PLLVAL(0x6b, 1, 2),  }, 	/* FVco 920.000000 */
+	{ .frequency = 240000000,	.index = PLLVAL(0x70, 1, 2),  }, 	/* FVco 960.000000 */
+	{ .frequency = 300000000,	.index = PLLVAL(0x75, 3, 1),  }, 	/* FVco 600.000000 */
+	{ .frequency = 310000000,	.index = PLLVAL(0x93, 4, 1),  }, 	/* FVco 620.000000 */
+	{ .frequency = 320000000,	.index = PLLVAL(0x98, 4, 1),  }, 	/* FVco 640.000000 */
+	{ .frequency = 330000000,	.index = PLLVAL(0x66, 2, 1),  }, 	/* FVco 660.000000 */
+	{ .frequency = 340000000,	.index = PLLVAL(0x4d, 1, 1),  }, 	/* FVco 680.000000 */
+	{ .frequency = 350000000,	.index = PLLVAL(0xa7, 4, 1),  }, 	/* FVco 700.000000 */
+	{ .frequency = 360000000,	.index = PLLVAL(0x70, 2, 1),  }, 	/* FVco 720.000000 */
+	{ .frequency = 370000000,	.index = PLLVAL(0xb1, 4, 1),  }, 	/* FVco 740.000000 */
+	{ .frequency = 380000000,	.index = PLLVAL(0x57, 1, 1),  }, 	/* FVco 760.000000 */
+	{ .frequency = 390000000,	.index = PLLVAL(0x7a, 2, 1),  }, 	/* FVco 780.000000 */
+	{ .frequency = 400000000,	.index = PLLVAL(0x5c, 1, 1),  }, 	/* FVco 800.000000 */
+};
+
+static int s3c2440_plls12_add(struct sys_device *dev)
+{
+	struct clk *xtal_clk;
+	unsigned long xtal;
+
+	xtal_clk = clk_get(NULL, "xtal");
+	if (IS_ERR(xtal_clk))
+		return PTR_ERR(xtal_clk);
+
+	xtal = clk_get_rate(xtal_clk);
+	clk_put(xtal_clk);
+
+	if (xtal == 12000000) {
+		printk(KERN_INFO "Using PLL table for 12MHz crystal\n");
+		return s3c_plltab_register(s3c2440_plls_12,
+					   ARRAY_SIZE(s3c2440_plls_12));
+	}
+
+	return 0;
+}
+
+static struct sysdev_driver s3c2440_plls12_drv = {
+	.add	= s3c2440_plls12_add,
+};
+
+static int __init s3c2440_pll_12mhz(void)
+{
+	return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_plls12_drv);
+
+}
+
+arch_initcall(s3c2440_pll_12mhz);
+
+static struct sysdev_driver s3c2442_plls12_drv = {
+	.add	= s3c2440_plls12_add,
+};
+
+static int __init s3c2442_pll_12mhz(void)
+{
+	return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_plls12_drv);
+
+}
+
+arch_initcall(s3c2442_pll_12mhz);
diff --git a/arch/arm/plat-s3c24xx/s3c2440-pll-16934400.c b/arch/arm/plat-s3c24xx/s3c2440-pll-16934400.c
new file mode 100644
index 00000000000..7679af13a94
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/s3c2440-pll-16934400.c
@@ -0,0 +1,127 @@
+/* arch/arm/plat-s3c24xx/s3c2440-pll-16934400.c
+ *
+ * Copyright (c) 2006-2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	Vincent Sanders <vince@arm.linux.org.uk>
+ *
+ * S3C2440/S3C2442 CPU PLL tables (16.93444MHz Crystal)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/sysdev.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <plat/cpu.h>
+#include <plat/cpu-freq-core.h>
+
+static struct cpufreq_frequency_table s3c2440_plls_169344[] __initdata = {
+	{ .frequency = 78019200,	.index = PLLVAL(121, 5, 3), 	}, 	/* FVco 624.153600 */
+	{ .frequency = 84067200,	.index = PLLVAL(131, 5, 3), 	}, 	/* FVco 672.537600 */
+	{ .frequency = 90115200,	.index = PLLVAL(141, 5, 3), 	}, 	/* FVco 720.921600 */
+	{ .frequency = 96163200,	.index = PLLVAL(151, 5, 3), 	}, 	/* FVco 769.305600 */
+	{ .frequency = 102135600,	.index = PLLVAL(185, 6, 3), 	}, 	/* FVco 817.084800 */
+	{ .frequency = 108259200,	.index = PLLVAL(171, 5, 3), 	}, 	/* FVco 866.073600 */
+	{ .frequency = 114307200,	.index = PLLVAL(127, 3, 3), 	}, 	/* FVco 914.457600 */
+	{ .frequency = 120234240,	.index = PLLVAL(134, 3, 3), 	}, 	/* FVco 961.873920 */
+	{ .frequency = 126161280,	.index = PLLVAL(141, 3, 3), 	}, 	/* FVco 1009.290240 */
+	{ .frequency = 132088320,	.index = PLLVAL(148, 3, 3), 	}, 	/* FVco 1056.706560 */
+	{ .frequency = 138015360,	.index = PLLVAL(155, 3, 3), 	}, 	/* FVco 1104.122880 */
+	{ .frequency = 144789120,	.index = PLLVAL(163, 3, 3), 	}, 	/* FVco 1158.312960 */
+	{ .frequency = 150100363,	.index = PLLVAL(187, 9, 2), 	}, 	/* FVco 600.401454 */
+	{ .frequency = 156038400,	.index = PLLVAL(121, 5, 2), 	}, 	/* FVco 624.153600 */
+	{ .frequency = 162086400,	.index = PLLVAL(126, 5, 2), 	}, 	/* FVco 648.345600 */
+	{ .frequency = 168134400,	.index = PLLVAL(131, 5, 2), 	}, 	/* FVco 672.537600 */
+	{ .frequency = 174048000,	.index = PLLVAL(177, 7, 2), 	}, 	/* FVco 696.192000 */
+	{ .frequency = 180230400,	.index = PLLVAL(141, 5, 2), 	}, 	/* FVco 720.921600 */
+	{ .frequency = 186278400,	.index = PLLVAL(124, 4, 2), 	}, 	/* FVco 745.113600 */
+	{ .frequency = 192326400,	.index = PLLVAL(151, 5, 2), 	}, 	/* FVco 769.305600 */
+	{ .frequency = 198132480,	.index = PLLVAL(109, 3, 2), 	}, 	/* FVco 792.529920 */
+	{ .frequency = 204271200,	.index = PLLVAL(185, 6, 2), 	}, 	/* FVco 817.084800 */
+	{ .frequency = 210268800,	.index = PLLVAL(141, 4, 2), 	}, 	/* FVco 841.075200 */
+	{ .frequency = 216518400,	.index = PLLVAL(171, 5, 2), 	}, 	/* FVco 866.073600 */
+	{ .frequency = 222264000,	.index = PLLVAL(97, 2, 2), 	}, 	/* FVco 889.056000 */
+	{ .frequency = 228614400,	.index = PLLVAL(127, 3, 2), 	}, 	/* FVco 914.457600 */
+	{ .frequency = 234259200,	.index = PLLVAL(158, 4, 2), 	}, 	/* FVco 937.036800 */
+	{ .frequency = 240468480,	.index = PLLVAL(134, 3, 2), 	}, 	/* FVco 961.873920 */
+	{ .frequency = 246960000,	.index = PLLVAL(167, 4, 2), 	}, 	/* FVco 987.840000 */
+	{ .frequency = 252322560,	.index = PLLVAL(141, 3, 2), 	}, 	/* FVco 1009.290240 */
+	{ .frequency = 258249600,	.index = PLLVAL(114, 2, 2), 	}, 	/* FVco 1032.998400 */
+	{ .frequency = 264176640,	.index = PLLVAL(148, 3, 2), 	}, 	/* FVco 1056.706560 */
+	{ .frequency = 270950400,	.index = PLLVAL(120, 2, 2), 	}, 	/* FVco 1083.801600 */
+	{ .frequency = 276030720,	.index = PLLVAL(155, 3, 2), 	}, 	/* FVco 1104.122880 */
+	{ .frequency = 282240000,	.index = PLLVAL(92, 1, 2), 	}, 	/* FVco 1128.960000 */
+	{ .frequency = 289578240,	.index = PLLVAL(163, 3, 2), 	}, 	/* FVco 1158.312960 */
+	{ .frequency = 294235200,	.index = PLLVAL(131, 2, 2), 	}, 	/* FVco 1176.940800 */
+	{ .frequency = 300200727,	.index = PLLVAL(187, 9, 1), 	}, 	/* FVco 600.401454 */
+	{ .frequency = 306358690,	.index = PLLVAL(191, 9, 1), 	}, 	/* FVco 612.717380 */
+	{ .frequency = 312076800,	.index = PLLVAL(121, 5, 1), 	}, 	/* FVco 624.153600 */
+	{ .frequency = 318366720,	.index = PLLVAL(86, 3, 1), 	}, 	/* FVco 636.733440 */
+	{ .frequency = 324172800,	.index = PLLVAL(126, 5, 1), 	}, 	/* FVco 648.345600 */
+	{ .frequency = 330220800,	.index = PLLVAL(109, 4, 1), 	}, 	/* FVco 660.441600 */
+	{ .frequency = 336268800,	.index = PLLVAL(131, 5, 1), 	}, 	/* FVco 672.537600 */
+	{ .frequency = 342074880,	.index = PLLVAL(93, 3, 1), 	}, 	/* FVco 684.149760 */
+	{ .frequency = 348096000,	.index = PLLVAL(177, 7, 1), 	}, 	/* FVco 696.192000 */
+	{ .frequency = 355622400,	.index = PLLVAL(118, 4, 1), 	}, 	/* FVco 711.244800 */
+	{ .frequency = 360460800,	.index = PLLVAL(141, 5, 1), 	}, 	/* FVco 720.921600 */
+	{ .frequency = 366206400,	.index = PLLVAL(165, 6, 1), 	}, 	/* FVco 732.412800 */
+	{ .frequency = 372556800,	.index = PLLVAL(124, 4, 1), 	}, 	/* FVco 745.113600 */
+	{ .frequency = 378201600,	.index = PLLVAL(126, 4, 1), 	}, 	/* FVco 756.403200 */
+	{ .frequency = 384652800,	.index = PLLVAL(151, 5, 1), 	}, 	/* FVco 769.305600 */
+	{ .frequency = 391608000,	.index = PLLVAL(177, 6, 1), 	}, 	/* FVco 783.216000 */
+	{ .frequency = 396264960,	.index = PLLVAL(109, 3, 1), 	}, 	/* FVco 792.529920 */
+	{ .frequency = 402192000,	.index = PLLVAL(87, 2, 1), 	}, 	/* FVco 804.384000 */
+};
+
+static int s3c2440_plls169344_add(struct sys_device *dev)
+{
+	struct clk *xtal_clk;
+	unsigned long xtal;
+
+	xtal_clk = clk_get(NULL, "xtal");
+	if (IS_ERR(xtal_clk))
+		return PTR_ERR(xtal_clk);
+
+	xtal = clk_get_rate(xtal_clk);
+	clk_put(xtal_clk);
+
+	if (xtal == 169344000) {
+		printk(KERN_INFO "Using PLL table for 16.9344MHz crystal\n");
+		return s3c_plltab_register(s3c2440_plls_169344,
+					   ARRAY_SIZE(s3c2440_plls_169344));
+	}
+
+	return 0;
+}
+
+static struct sysdev_driver s3c2440_plls169344_drv = {
+	.add	= s3c2440_plls169344_add,
+};
+
+static int __init s3c2440_pll_16934400(void)
+{
+	return sysdev_driver_register(&s3c2440_sysclass,
+				      &s3c2440_plls169344_drv);
+
+}
+
+arch_initcall(s3c2440_pll_16934400);
+
+static struct sysdev_driver s3c2442_plls169344_drv = {
+	.add	= s3c2440_plls169344_add,
+};
+
+static int __init s3c2442_pll_16934400(void)
+{
+	return sysdev_driver_register(&s3c2442_sysclass,
+				      &s3c2442_plls169344_drv);
+
+}
+
+arch_initcall(s3c2442_pll_16934400);
-- 
cgit v1.2.3


From 0345b51c6a4bfaf6c066b8055d02116432b6a0c9 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:31 +0100
Subject: ARM: S3C2440: CPUFREQ: Add crystal frequency Kconfig entries.

Add entries to select the crystal to select for each different
supported board. This information is then available for anything
else requiring this, such as the CPUFreq PLL tables.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2440/Kconfig |  6 ++++++
 arch/arm/plat-s3c24xx/Kconfig | 16 ++++++++++++++--
 2 files changed, 20 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
index 8cfeaec3730..3cb12e39e0a 100644
--- a/arch/arm/mach-s3c2440/Kconfig
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -33,6 +33,7 @@ config MACH_ANUBIS
 	select PM_SIMTEC if PM
 	select HAVE_PATA_PLATFORM
 	select S3C24XX_GPIO_EXTRA64
+	select S3C2440_XTAL_12000000
 	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the Simtec Electronics ANUBIS
@@ -44,6 +45,7 @@ config MACH_OSIRIS
 	select S3C24XX_DCLK
 	select PM_SIMTEC if PM
 	select S3C24XX_GPIO_EXTRA128
+	select S3C2440_XTAL_12000000
 	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the Simtec IM2440D20 module, also
@@ -52,6 +54,7 @@ config MACH_OSIRIS
 config MACH_RX3715
 	bool "HP iPAQ rx3715"
 	select CPU_S3C2440
+	select S3C2440_XTAL_16934400
 	select PM_H1940 if PM
 	help
 	  Say Y here if you are using the HP iPAQ rx3715.
@@ -59,6 +62,7 @@ config MACH_RX3715
 config ARCH_S3C2440
 	bool "SMDK2440"
 	select CPU_S3C2440
+	select S3C2440_XTAL_16934400
 	select MACH_SMDK
 	select S3C_DEV_USB_HOST
 	help
@@ -67,6 +71,7 @@ config ARCH_S3C2440
 config MACH_NEXCODER_2440
  	bool "NexVision NEXCODER 2440 Light Board"
  	select CPU_S3C2440
+	select S3C2440_XTAL_12000000
 	select S3C_DEV_USB_HOST
 	help
  	  Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board
@@ -75,6 +80,7 @@ config SMDK2440_CPU2440
 	bool "SMDK2440 with S3C2440 CPU module"
 	depends on ARCH_S3C2440
 	default y if ARCH_S3C2440
+	select S3C2440_XTAL_16934400
 	select CPU_S3C2440
 
 config MACH_AT2440EVB
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index 9c449c048c7..ec9921b6848 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -42,16 +42,28 @@ config S3C2440_CPUFREQ
 	help
 	  CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs.
 
+config S3C2440_XTAL_12000000
+	bool
+	help
+	  Indicate that the build needs to support 12MHz system
+	  crystal.
+
+config S3C2440_XTAL_16934400
+	bool
+	help
+	  Indicate that the build needs to support 16.9344MHz system
+	  crystal.
+
 config S3C2440_PLL_12000000
 	bool
-	depends on S3C2440_CPUFREQ
+	depends on S3C2440_CPUFREQ && S3C2440_XTAL_12000000
 	default y if CPU_FREQ_S3C24XX_PLL
 	help
 	  PLL tables for S3C2440 or S3C2442 CPUs with 12MHz crystals.
 
 config S3C2440_PLL_16934400
 	bool
-	depends on S3C2440_CPUFREQ
+	depends on S3C2440_CPUFREQ && S3C2440_XTAL_16934400
 	default y if CPU_FREQ_S3C24XX_PLL
 	help
 	  PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals.
-- 
cgit v1.2.3


From baf6b281cfa7259ab2d1148b879850f699520bc6 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:32 +0100
Subject: ARM: OSIRIS: CPUFREQ: Add CPU frequency scaling support

Add CPU frequency scalling support to the Simtec Osiris.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2440/Kconfig       | 1 +
 arch/arm/mach-s3c2440/mach-osiris.c | 9 +++++++++
 2 files changed, 10 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
index 3cb12e39e0a..8ae1b288f7f 100644
--- a/arch/arm/mach-s3c2440/Kconfig
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -46,6 +46,7 @@ config MACH_OSIRIS
 	select PM_SIMTEC if PM
 	select S3C24XX_GPIO_EXTRA128
 	select S3C2440_XTAL_12000000
+	select S3C2410_IOTIMING if S3C2440_CPUFREQ
 	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the Simtec IM2440D20 module, also
diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c
index cba064b49a6..2105a41281a 100644
--- a/arch/arm/mach-s3c2440/mach-osiris.c
+++ b/arch/arm/mach-s3c2440/mach-osiris.c
@@ -34,6 +34,7 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
+#include <plat/cpu-freq.h>
 #include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-mem.h>
@@ -351,6 +352,12 @@ static struct clk *osiris_clocks[] __initdata = {
 	&s3c24xx_uclk,
 };
 
+static struct s3c_cpufreq_board __initdata osiris_cpufreq = {
+	.refresh	= 7800, /* refresh period is 7.8usec */
+	.auto_io	= 1,
+	.need_io	= 1,
+};
+
 static void __init osiris_map_io(void)
 {
 	unsigned long flags;
@@ -402,6 +409,8 @@ static void __init osiris_init(void)
 
 	s3c_i2c0_set_platdata(NULL);
 
+	s3c_cpufreq_setboard(&osiris_cpufreq);
+
 	i2c_register_board_info(0, osiris_i2c_devs,
 				ARRAY_SIZE(osiris_i2c_devs));
 
-- 
cgit v1.2.3


From 22d4239973bbd3738b3cfe6048c55f885f3f6256 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:33 +0100
Subject: ARM: S3C2412: CPUFREQ: Add core support.

Add core support for frequency scaling on the S3C2412 SoC.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2412/Kconfig    |   6 +
 arch/arm/mach-s3c2412/Makefile   |   1 +
 arch/arm/mach-s3c2412/cpu-freq.c | 251 +++++++++++++++++++++++++++++++++++++++
 3 files changed, 258 insertions(+)
 create mode 100644 arch/arm/mach-s3c2412/cpu-freq.c

(limited to 'arch')

diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig
index 63586ffd0ae..79e18340e07 100644
--- a/arch/arm/mach-s3c2412/Kconfig
+++ b/arch/arm/mach-s3c2412/Kconfig
@@ -32,6 +32,12 @@ config S3C2412_PM
 	help
 	  Internal config node to apply S3C2412 power management
 
+config S3C2412_CPUFREQ
+	bool
+	depends on CPU_FREQ_S3C24XX && CPU_S3C2412
+	default y
+	help
+	  CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs.
 
 menu "S3C2412 Machines"
 
diff --git a/arch/arm/mach-s3c2412/Makefile b/arch/arm/mach-s3c2412/Makefile
index 20918d5dc6a..530ec46cbae 100644
--- a/arch/arm/mach-s3c2412/Makefile
+++ b/arch/arm/mach-s3c2412/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_CPU_S3C2412)	+= clock.o
 obj-$(CONFIG_CPU_S3C2412)	+= gpio.o
 obj-$(CONFIG_S3C2412_DMA)	+= dma.o
 obj-$(CONFIG_S3C2412_PM)	+= pm.o sleep.o
+obj-$(CONFIG_S3C2412_CPUFREQ)	+= cpu-freq.o
 
 # Machine support
 
diff --git a/arch/arm/mach-s3c2412/cpu-freq.c b/arch/arm/mach-s3c2412/cpu-freq.c
new file mode 100644
index 00000000000..80b20c33447
--- /dev/null
+++ b/arch/arm/mach-s3c2412/cpu-freq.c
@@ -0,0 +1,251 @@
+/* linux/arch/arm/mach-s3c2412/cpu-freq.c
+ *
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2412 CPU Frequency scalling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/cpufreq.h>
+#include <linux/sysdev.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/regs-clock.h>
+#include <mach/regs-s3c2412-mem.h>
+
+#include <plat/cpu.h>
+#include <plat/clock.h>
+#include <plat/cpu-freq-core.h>
+
+/* our clock resources. */
+static struct clk *xtal;
+static struct clk *fclk;
+static struct clk *hclk;
+static struct clk *armclk;
+
+/* HDIV: 1, 2, 3, 4, 6, 8 */
+
+static int s3c2412_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
+{
+	unsigned int hdiv, pdiv, armdiv, dvs;
+	unsigned long hclk, fclk, armclk, armdiv_clk;
+	unsigned long hclk_max;
+
+	fclk = cfg->freq.fclk;
+	armclk = cfg->freq.armclk;
+	hclk_max = cfg->max.hclk;
+
+	/* We can't run hclk above armclk as at the best we have to
+	 * have armclk and hclk in dvs mode. */
+
+	if (hclk_max > armclk)
+		hclk_max = armclk;
+
+	s3c_freq_dbg("%s: fclk=%lu, armclk=%lu, hclk_max=%lu\n",
+		     __func__, fclk, armclk, hclk_max);
+	s3c_freq_dbg("%s: want f=%lu, arm=%lu, h=%lu, p=%lu\n",
+		     __func__, cfg->freq.fclk, cfg->freq.armclk,
+		     cfg->freq.hclk, cfg->freq.pclk);
+
+	armdiv = fclk / armclk;
+
+	if (armdiv < 1)
+		armdiv = 1;
+	if (armdiv > 2)
+		armdiv = 2;
+
+	cfg->divs.arm_divisor = armdiv;
+	armdiv_clk = fclk / armdiv;
+
+	hdiv = armdiv_clk / hclk_max;
+	if (hdiv < 1)
+		hdiv = 1;
+
+	cfg->freq.hclk = hclk = armdiv_clk / hdiv;
+
+	/* set dvs depending on whether we reached armclk or not. */
+	cfg->divs.dvs = dvs = armclk < armdiv_clk;
+
+	/* update the actual armclk we achieved. */
+	cfg->freq.armclk = dvs ? hclk : armdiv_clk;
+
+	s3c_freq_dbg("%s: armclk %lu, hclk %lu, armdiv %d, hdiv %d, dvs %d\n",
+		     __func__, armclk, hclk, armdiv, hdiv, cfg->divs.dvs);
+
+	if (hdiv > 4)
+		goto invalid;
+
+	pdiv = (hclk > cfg->max.pclk) ? 2 : 1;
+
+	if ((hclk / pdiv) > cfg->max.pclk)
+		pdiv++;
+
+	cfg->freq.pclk = hclk / pdiv;
+
+	s3c_freq_dbg("%s: pdiv %d\n", __func__, pdiv);
+
+	if (pdiv > 2)
+		goto invalid;
+
+	pdiv *= hdiv;
+
+	/* store the result, and then return */
+
+	cfg->divs.h_divisor = hdiv * armdiv;
+	cfg->divs.p_divisor = pdiv * armdiv;
+
+	return 0;
+
+ invalid:
+	return -EINVAL;
+}
+
+static void s3c2412_cpufreq_setdivs(struct s3c_cpufreq_config *cfg)
+{
+	unsigned long clkdiv;
+	unsigned long olddiv;
+
+	olddiv = clkdiv = __raw_readl(S3C2410_CLKDIVN);
+
+	/* clear off current clock info */
+
+	clkdiv &= ~S3C2412_CLKDIVN_ARMDIVN;
+	clkdiv &= ~S3C2412_CLKDIVN_HDIVN_MASK;
+	clkdiv &= ~S3C2412_CLKDIVN_PDIVN;
+
+	if (cfg->divs.arm_divisor == 2)
+		clkdiv |= S3C2412_CLKDIVN_ARMDIVN;
+
+	clkdiv |= ((cfg->divs.h_divisor / cfg->divs.arm_divisor) - 1);
+
+	if (cfg->divs.p_divisor != cfg->divs.h_divisor)
+		clkdiv |= S3C2412_CLKDIVN_PDIVN;
+
+	s3c_freq_dbg("%s: div %08lx => %08lx\n", __func__, olddiv, clkdiv);
+	__raw_writel(clkdiv, S3C2410_CLKDIVN);
+
+	clk_set_parent(armclk, cfg->divs.dvs ? hclk : fclk);
+}
+
+static void s3c2412_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
+{
+	struct s3c_cpufreq_board *board = cfg->board;
+	unsigned long refresh;
+
+	s3c_freq_dbg("%s: refresh %u ns, hclk %lu\n", __func__,
+		     board->refresh, cfg->freq.hclk);
+
+	/* Reduce both the refresh time (in ns) and the frequency (in MHz)
+	 * by 10 each to ensure that we do not overflow 32 bit numbers. This
+	 * should work for HCLK up to 133MHz and refresh period up to 30usec.
+	 */
+
+	refresh = (board->refresh / 10);
+	refresh *= (cfg->freq.hclk / 100);
+	refresh /= (1 * 1000 * 1000);	/* 10^6 */
+
+	s3c_freq_dbg("%s: setting refresh 0x%08lx\n", __func__, refresh);
+	__raw_writel(refresh, S3C2412_REFRESH);
+}
+
+/* set the default cpu frequency information, based on an 200MHz part
+ * as we have no other way of detecting the speed rating in software.
+ */
+
+static struct s3c_cpufreq_info s3c2412_cpufreq_info = {
+	.max		= {
+		.fclk	= 200000000,
+		.hclk	= 100000000,
+		.pclk	=  50000000,
+	},
+
+	.latency	= 5000000, /* 5ms */
+
+	.locktime_m	= 150,
+	.locktime_u	= 150,
+	.locktime_bits	= 16,
+
+	.name		= "s3c2412",
+	.set_refresh	= s3c2412_cpufreq_setrefresh,
+	.set_divs	= s3c2412_cpufreq_setdivs,
+	.calc_divs	= s3c2412_cpufreq_calcdivs,
+
+	.resume_clocks	= s3c2412_setup_clocks,
+};
+
+static int s3c2412_cpufreq_add(struct sys_device *sysdev)
+{
+	unsigned long fclk_rate;
+
+	hclk = clk_get(NULL, "hclk");
+	if (IS_ERR(hclk)) {
+		printk(KERN_ERR "%s: cannot find hclk clock\n", __func__);
+		return -ENOENT;
+	}
+
+	fclk = clk_get(NULL, "fclk");
+	if (IS_ERR(fclk)) {
+		printk(KERN_ERR "%s: cannot find fclk clock\n", __func__);
+		goto err_fclk;
+	}
+
+	fclk_rate = clk_get_rate(fclk);
+	if (fclk_rate > 200000000) {
+		printk(KERN_INFO
+		       "%s: fclk %ld MHz, assuming 266MHz capable part\n",
+		       __func__, fclk_rate / 1000000);
+		s3c2412_cpufreq_info.max.fclk = 266000000;
+		s3c2412_cpufreq_info.max.hclk = 133000000;
+		s3c2412_cpufreq_info.max.pclk =  66000000;
+	}
+
+	armclk = clk_get(NULL, "armclk");
+	if (IS_ERR(armclk)) {
+		printk(KERN_ERR "%s: cannot find arm clock\n", __func__);
+		goto err_armclk;
+	}
+
+	xtal = clk_get(NULL, "xtal");
+	if (IS_ERR(xtal)) {
+		printk(KERN_ERR "%s: cannot find xtal clock\n", __func__);
+		goto err_xtal;
+	}
+
+	return s3c_cpufreq_register(&s3c2412_cpufreq_info);
+
+err_xtal:
+	clk_put(armclk);
+err_armclk:
+	clk_put(fclk);
+err_fclk:
+	clk_put(hclk);
+
+	return -ENOENT;
+}
+
+static struct sysdev_driver s3c2412_cpufreq_driver = {
+	.add		= s3c2412_cpufreq_add,
+};
+
+static int s3c2412_cpufreq_init(void)
+{
+	return sysdev_driver_register(&s3c2412_sysclass,
+				      &s3c2412_cpufreq_driver);
+}
+
+arch_initcall(s3c2412_cpufreq_init);
-- 
cgit v1.2.3


From e13cf03eaae3792442c401860910d40f33c89a33 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:35 +0100
Subject: ARM: S3C: Update CPU register mapping practices.

Currently map-base.h defines the main virtual address mappings made
for all the support S3C SoC series, but does not then define any base
for per-cpu mappings to be made from.

Add S3C_ADDR_CPU() macro to define an virtual address as an offset
from the last of the core mappings.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c6400/include/mach/map.h  | 4 ++--
 arch/arm/plat-s3c/include/plat/map-base.h | 8 +++++++-
 2 files changed, 9 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-s3c6400/include/mach/map.h b/arch/arm/mach-s3c6400/include/mach/map.h
index 5057d9948d3..e02e6c38a39 100644
--- a/arch/arm/mach-s3c6400/include/mach/map.h
+++ b/arch/arm/mach-s3c6400/include/mach/map.h
@@ -49,7 +49,7 @@
 #define S3C64XX_PA_IIC1		(0x7F00F000)
 
 #define S3C64XX_PA_GPIO		(0x7F008000)
-#define S3C64XX_VA_GPIO		S3C_ADDR(0x00500000)
+#define S3C64XX_VA_GPIO		S3C_ADDR_CPU(0x00000000)
 #define S3C64XX_SZ_GPIO		SZ_4K
 
 #define S3C64XX_PA_SDRAM	(0x50000000)
@@ -57,7 +57,7 @@
 #define S3C64XX_PA_VIC1		(0x71300000)
 
 #define S3C64XX_PA_MODEM	(0x74108000)
-#define S3C64XX_VA_MODEM	S3C_ADDR(0x00600000)
+#define S3C64XX_VA_MODEM	S3C_ADDR_CPU(0x00100000)
 
 #define S3C64XX_PA_USBHOST	(0x74300000)
 
diff --git a/arch/arm/plat-s3c/include/plat/map-base.h b/arch/arm/plat-s3c/include/plat/map-base.h
index b84289d32a5..250be311c85 100644
--- a/arch/arm/plat-s3c/include/plat/map-base.h
+++ b/arch/arm/plat-s3c/include/plat/map-base.h
@@ -32,9 +32,15 @@
 
 #define S3C_VA_IRQ	S3C_ADDR(0x00000000)	/* irq controller(s) */
 #define S3C_VA_SYS	S3C_ADDR(0x00100000)	/* system control */
-#define S3C_VA_MEM	S3C_ADDR(0x00200000)	/* system control */
+#define S3C_VA_MEM	S3C_ADDR(0x00200000)	/* memory control */
 #define S3C_VA_TIMER	S3C_ADDR(0x00300000)	/* timer block */
 #define S3C_VA_WATCHDOG	S3C_ADDR(0x00400000)	/* watchdog */
 #define S3C_VA_UART	S3C_ADDR(0x01000000)	/* UART */
 
+/* This is used for the CPU specific mappings that may be needed, so that
+ * they do not need to directly used S3C_ADDR() and thus make it easier to
+ * modify the space for mapping.
+ */
+#define S3C_ADDR_CPU(x)	S3C_ADDR(0x00500000 + (x))
+
 #endif /* __ASM_PLAT_MAP_H */
-- 
cgit v1.2.3


From 25400036867fa7a135fca17810555400d176acaa Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:36 +0100
Subject: ARM: S3C2412: Update memory register mapping and definitions

Update the mapping of the memory controler registers and
add the missing definitions of the register block for the
SSMC.

The register contents definitions can be found in the pl093
header.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2410/include/mach/map.h           |  7 +++++++
 .../mach-s3c2410/include/mach/regs-s3c2412-mem.h   | 23 ++++++++++++++++++++--
 arch/arm/mach-s3c2412/s3c2412.c                    | 12 +++++++++++
 3 files changed, 40 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-s3c2410/include/mach/map.h b/arch/arm/mach-s3c2410/include/mach/map.h
index e99b212cb1c..11cce097550 100644
--- a/arch/arm/mach-s3c2410/include/mach/map.h
+++ b/arch/arm/mach-s3c2410/include/mach/map.h
@@ -67,6 +67,13 @@
 #define S3C2443_PA_HSMMC   (0x4A800000)
 #define S3C2443_SZ_HSMMC   (256)
 
+/* S3C2412 memory and IO controls */
+#define S3C2412_PA_SSMC	(0x4F000000)
+#define S3C2412_VA_SSMC	S3C_ADDR_CPU(0x00000000)
+
+#define S3C2412_PA_EBI	(0x48800000)
+#define S3C2412_VA_EBI	S3C_ADDR_CPU(0x00010000)
+
 /* physical addresses of all the chip-select areas */
 
 #define S3C2410_CS0 (0x00000000)
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h b/arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h
index a4bf2712317..fb635251509 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h
@@ -14,9 +14,11 @@
 #ifndef __ASM_ARM_REGS_S3C2412_MEM
 #define __ASM_ARM_REGS_S3C2412_MEM
 
-#ifndef S3C2412_MEMREG
 #define S3C2412_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x))
-#endif
+#define S3C2412_EBIREG(x) (S3C2412_VA_EBI + (x))
+
+#define S3C2412_SSMCREG(x) (S3C2412_VA_SSMC + (x))
+#define S3C2412_SSMC(x, o) (S3C2412_SSMCREG((x * 0x20) + (o)))
 
 #define S3C2412_BANKCFG			S3C2412_MEMREG(0x00)
 #define S3C2412_BANKCON1		S3C2412_MEMREG(0x04)
@@ -26,4 +28,21 @@
 #define S3C2412_REFRESH			S3C2412_MEMREG(0x10)
 #define S3C2412_TIMEOUT			S3C2412_MEMREG(0x14)
 
+/* EBI control registers */
+
+#define S3C2412_EBI_PR			S3C2412_EBIREG(0x00)
+#define S3C2412_EBI_BANKCFG		S3C2412_EBIREG(0x04)
+
+/* SSMC control registers */
+
+#define S3C2412_SSMC_BANK(x)		S3C2412_SSMC(x, 0x00)
+#define S3C2412_SMIDCYR(x)		S3C2412_SSMC(x, 0x00)
+#define S3C2412_SMBWSTRD(x)		S3C2412_SSMC(x, 0x04)
+#define S3C2412_SMBWSTWRR(x)		S3C2412_SSMC(x, 0x08)
+#define S3C2412_SMBWSTOENR(x)		S3C2412_SSMC(x, 0x0C)
+#define S3C2412_SMBWSTWENR(x)		S3C2412_SSMC(x, 0x10)
+#define S3C2412_SMBCR(x)		S3C2412_SSMC(x, 0x14)
+#define S3C2412_SMBSR(x)		S3C2412_SSMC(x, 0x18)
+#define S3C2412_SMBWSTBRDR(x)		S3C2412_SSMC(x, 0x1C)
+
 #endif /*  __ASM_ARM_REGS_S3C2412_MEM */
diff --git a/arch/arm/mach-s3c2412/s3c2412.c b/arch/arm/mach-s3c2412/s3c2412.c
index 5b5aba69ec3..bef39f77729 100644
--- a/arch/arm/mach-s3c2412/s3c2412.c
+++ b/arch/arm/mach-s3c2412/s3c2412.c
@@ -69,6 +69,18 @@ static struct map_desc s3c2412_iodesc[] __initdata = {
 	IODESC_ENT(CLKPWR),
 	IODESC_ENT(TIMER),
 	IODESC_ENT(WATCHDOG),
+	{
+		.virtual = (unsigned long)S3C2412_VA_SSMC,
+		.pfn	 = __phys_to_pfn(S3C2412_PA_SSMC),
+		.length	 = SZ_1M,
+		.type	 = MT_DEVICE,
+	},
+	{
+		.virtual = (unsigned long)S3C2412_VA_EBI,
+		.pfn	 = __phys_to_pfn(S3C2412_PA_EBI),
+		.length	 = SZ_1M,
+		.type	 = MT_DEVICE,
+	},
 };
 
 /* uart registration process */
-- 
cgit v1.2.3


From 140780ab5a2bc04ccff77337c3a27f3b44182a91 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:37 +0100
Subject: ARM: S3C24XX: CPUFREQ: S3C2412/S3C2443 IO timing support

Add IO bank timing support for S3C2412/S3C2443.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2412/Kconfig                      |   3 +
 arch/arm/mach-s3c2412/cpu-freq.c                   |   4 +
 arch/arm/plat-s3c24xx/Kconfig                      |   9 +
 arch/arm/plat-s3c24xx/Makefile                     |   1 +
 arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h |  52 +++-
 arch/arm/plat-s3c24xx/s3c2412-iotiming.c           | 261 +++++++++++++++++++++
 6 files changed, 329 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/plat-s3c24xx/s3c2412-iotiming.c

(limited to 'arch')

diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig
index 79e18340e07..35c1bde89cf 100644
--- a/arch/arm/mach-s3c2412/Kconfig
+++ b/arch/arm/mach-s3c2412/Kconfig
@@ -32,9 +32,12 @@ config S3C2412_PM
 	help
 	  Internal config node to apply S3C2412 power management
 
+# Note, the S3C2412 IOtiming support is in plat-s3c24xx
+
 config S3C2412_CPUFREQ
 	bool
 	depends on CPU_FREQ_S3C24XX && CPU_S3C2412
+	select S3C2412_IOTIMING
 	default y
 	help
 	  CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs.
diff --git a/arch/arm/mach-s3c2412/cpu-freq.c b/arch/arm/mach-s3c2412/cpu-freq.c
index 80b20c33447..21a66178d9b 100644
--- a/arch/arm/mach-s3c2412/cpu-freq.c
+++ b/arch/arm/mach-s3c2412/cpu-freq.c
@@ -185,6 +185,10 @@ static struct s3c_cpufreq_info s3c2412_cpufreq_info = {
 	.set_divs	= s3c2412_cpufreq_setdivs,
 	.calc_divs	= s3c2412_cpufreq_calcdivs,
 
+	.calc_iotiming	= s3c2412_iotiming_calc,
+	.set_iotiming	= s3c2412_iotiming_set,
+	.get_iotiming	= s3c2412_iotiming_get,
+
 	.resume_clocks	= s3c2412_setup_clocks,
 };
 
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index ec9921b6848..f0b9c73fe00 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -157,6 +157,15 @@ config S3C2410_CPUFREQ_UTILS
 	  Internal node to select timing code that is common to the s3c2410
 	  and s3c2440/s3c244 cpu frequency support.
 
+# cpu frequency support common to s3c2412, s3c2413 and s3c2442
+
+config S3C2412_IOTIMING
+	bool
+	depends on CPU_FREQ_S3C24XX && (CPU_S3C2412 || CPU_S3C2443)
+	help
+	  Intel node to select io timing code that is common to the s3c2412
+	  and the s3c2443.
+
 config MACH_SMDK
 	bool
 	help
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index c60317b3491..8759c070fd9 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -40,6 +40,7 @@ obj-$(CONFIG_S3C2410_CLOCK)	+= s3c2410-clock.o
 obj-$(CONFIG_S3C2410_DMA)	+= dma.o
 obj-$(CONFIG_S3C24XX_ADC)	+= adc.o
 obj-$(CONFIG_S3C2410_IOTIMING)	+= s3c2410-iotiming.o
+obj-$(CONFIG_S3C2412_IOTIMING)	+= s3c2412-iotiming.o
 obj-$(CONFIG_S3C2410_CPUFREQ_UTILS) += s3c2410-cpufreq-utils.o
 
 # device specific setup and/or initialisation
diff --git a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
index 7938fb0bc38..f02b3c06c1e 100644
--- a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
+++ b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
@@ -42,8 +42,44 @@ struct s3c2410_iobank_timing {
 	unsigned char	nwait_en;	/* nWait enabled for bank. */
 };
 
+/**
+ * struct s3c2412_iobank_timing - io timings for PL092 (S3C2412) style IO
+ * @idcy: The idle cycle time between transactions.
+ * @wstrd: nCS release to end of read cycle.
+ * @wstwr: nCS release to end of write cycle.
+ * @wstoen: nCS assertion to nOE assertion time.
+ * @wstwen: nCS assertion to nWE assertion time.
+ * @wstbrd: Burst ready delay.
+ * @smbidcyr: Register cache for smbidcyr value.
+ * @smbwstrd: Register cache for smbwstrd value.
+ * @smbwstwr: Register cache for smbwstwr value.
+ * @smbwstoen: Register cache for smbwstoen value.
+ * @smbwstwen: Register cache for smbwstwen value.
+ * @smbwstbrd: Register cache for smbwstbrd value.
+ *
+ * Timing information for a IO bank on an S3C2412 or similar system which
+ * uses a PL093 block.
+ */
+struct s3c2412_iobank_timing {
+	unsigned int	idcy;
+	unsigned int	wstrd;
+	unsigned int	wstwr;
+	unsigned int	wstoen;
+	unsigned int	wstwen;
+	unsigned int	wstbrd;
+
+	/* register cache */
+	unsigned char	smbidcyr;
+	unsigned char	smbwstrd;
+	unsigned char	smbwstwr;
+	unsigned char	smbwstoen;
+	unsigned char	smbwstwen;
+	unsigned char	smbwstbrd;
+};
+
 union s3c_iobank {
-	  struct s3c2410_iobank_timing	*io_2410;
+	struct s3c2410_iobank_timing	*io_2410;
+	struct s3c2412_iobank_timing	*io_2412;
 };
 
 /**
@@ -174,6 +210,20 @@ extern void s3c2410_iotiming_set(struct s3c_cpufreq_config *cfg,
 
 extern void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg);
 
+/* S3C2412 compatible routines */
+
+extern int s3c2412_iotiming_get(struct s3c_cpufreq_config *cfg,
+				struct s3c_iotimings *timings);
+
+extern int s3c2412_iotiming_get(struct s3c_cpufreq_config *cfg,
+				struct s3c_iotimings *timings);
+
+extern int s3c2412_iotiming_calc(struct s3c_cpufreq_config *cfg,
+				 struct s3c_iotimings *iot);
+
+extern void s3c2412_iotiming_set(struct s3c_cpufreq_config *cfg,
+				 struct s3c_iotimings *iot);
+
 #ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUG
 #define s3c_freq_dbg(x...) printk(KERN_INFO x)
 #else
diff --git a/arch/arm/plat-s3c24xx/s3c2412-iotiming.c b/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
new file mode 100644
index 00000000000..a3648cba0eb
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
@@ -0,0 +1,261 @@
+/* linux/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
+ *
+ * Copyright (c) 2006,2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2412/S3C2443 (PL093 based) IO timing support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/cpufreq.h>
+#include <linux/sysdev.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <linux/amba/pl093.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/regs-s3c2412-mem.h>
+
+#include <plat/cpu.h>
+#include <plat/cpu-freq-core.h>
+#include <plat/clock.h>
+
+#define print_ns(x) ((x) / 10), ((x) % 10)
+
+/**
+ * s3c2412_print_timing - print timing infromation via printk.
+ * @pfx: The prefix to print each line with.
+ * @iot: The IO timing information
+ */
+static void s3c2412_print_timing(const char *pfx, struct s3c_iotimings *iot)
+{
+	struct s3c2412_iobank_timing *bt;
+	unsigned int bank;
+
+	for (bank = 0; bank < MAX_BANKS; bank++) {
+		bt = iot->bank[bank].io_2412;
+		if (!bt)
+			continue;
+
+		printk(KERN_DEBUG "%s: %d: idcy=%d.%d wstrd=%d.%d wstwr=%d,%d"
+		       "wstoen=%d.%d wstwen=%d.%d wstbrd=%d.%d\n", pfx, bank,
+		       print_ns(bt->idcy),
+		       print_ns(bt->wstrd),
+		       print_ns(bt->wstwr),
+		       print_ns(bt->wstoen),
+		       print_ns(bt->wstwen),
+		       print_ns(bt->wstbrd));
+	}
+}
+
+/**
+ * to_div - turn a cycle length into a divisor setting.
+ * @cyc_tns: The cycle time in 10ths of nanoseconds.
+ * @clk_tns: The clock period in 10ths of nanoseconds.
+ */
+static inline unsigned int to_div(unsigned int cyc_tns, unsigned int clk_tns)
+{
+	return cyc_tns ? DIV_ROUND_UP(cyc_tns, clk_tns) : 0;
+}
+
+/**
+ * calc_timing - calculate timing divisor value and check in range.
+ * @hwtm: The hardware timing in 10ths of nanoseconds.
+ * @clk_tns: The clock period in 10ths of nanoseconds.
+ * @err: Pointer to err variable to update in event of failure.
+ */
+static unsigned int calc_timing(unsigned int hwtm, unsigned int clk_tns,
+				unsigned int *err)
+{
+	unsigned int ret = to_div(hwtm, clk_tns);
+
+	if (ret > 0xf)
+		*err = -EINVAL;
+
+	return ret;
+}
+
+/**
+ * s3c2412_calc_bank - calculate the bank divisor settings.
+ * @cfg: The current frequency configuration.
+ * @bt: The bank timing.
+ */
+static int s3c2412_calc_bank(struct s3c_cpufreq_config *cfg,
+			     struct s3c2412_iobank_timing *bt)
+{
+	unsigned int hclk = cfg->freq.hclk_tns;
+	int err = 0;
+
+	bt->smbidcyr = calc_timing(bt->idcy, hclk, &err);
+	bt->smbwstrd = calc_timing(bt->wstrd, hclk, &err);
+	bt->smbwstwr = calc_timing(bt->wstwr, hclk, &err);
+	bt->smbwstoen = calc_timing(bt->wstoen, hclk, &err);
+	bt->smbwstwen = calc_timing(bt->wstwen, hclk, &err);
+	bt->smbwstbrd = calc_timing(bt->wstbrd, hclk, &err);
+
+	return err;
+}
+
+/**
+ * s3c2412_iotiming_calc - calculate all the bank divisor settings.
+ * @cfg: The current frequency configuration.
+ * @iot: The bank timing information.
+ *
+ * Calculate the timing information for all the banks that are
+ * configured as IO, using s3c2412_calc_bank().
+ */
+int s3c2412_iotiming_calc(struct s3c_cpufreq_config *cfg,
+			  struct s3c_iotimings *iot)
+{
+	struct s3c2412_iobank_timing *bt;
+	int bank;
+	int ret;
+
+	for (bank = 0; bank < MAX_BANKS; bank++) {
+		bt = iot->bank[bank].io_2412;
+		if (!bt)
+			continue;
+
+		ret = s3c2412_calc_bank(cfg, bt);
+		if (ret) {
+			printk(KERN_ERR "%s: cannot calculate bank %d io\n",
+			       __func__, bank);
+			goto err;
+		}
+	}
+
+	return 0;
+ err:
+	return ret;
+}
+
+/**
+ * s3c2412_iotiming_set - set the timing information
+ * @cfg: The current frequency configuration.
+ * @iot: The bank timing information.
+ *
+ * Set the IO bank information from the details calculated earlier from
+ * calling s3c2412_iotiming_calc().
+ */
+void s3c2412_iotiming_set(struct s3c_cpufreq_config *cfg,
+			  struct s3c_iotimings *iot)
+{
+	struct s3c2412_iobank_timing *bt;
+	void __iomem *regs;
+	int bank;
+
+	/* set the io timings from the specifier */
+
+	for (bank = 0; bank < MAX_BANKS; bank++) {
+		bt = iot->bank[bank].io_2412;
+		if (!bt)
+			continue;
+
+		regs = S3C2412_SSMC_BANK(bank);
+
+		__raw_writel(bt->smbidcyr, regs + SMBIDCYR);
+		__raw_writel(bt->smbwstrd, regs + SMBWSTRDR);
+		__raw_writel(bt->smbwstwr, regs + SMBWSTWRR);
+		__raw_writel(bt->smbwstoen, regs + SMBWSTOENR);
+		__raw_writel(bt->smbwstwen, regs + SMBWSTWENR);
+		__raw_writel(bt->smbwstbrd, regs + SMBWSTBRDR);
+	}
+}
+
+static inline unsigned int s3c2412_decode_timing(unsigned int clock, u32 reg)
+{
+	return (reg & 0xf) * clock;
+}
+
+static void s3c2412_iotiming_getbank(struct s3c_cpufreq_config *cfg,
+				     struct s3c2412_iobank_timing *bt,
+				     unsigned int bank)
+{
+	unsigned long clk = cfg->freq.hclk_tns;  /* ssmc clock??? */
+	void __iomem *regs = S3C2412_SSMC_BANK(bank);
+
+	bt->idcy = s3c2412_decode_timing(clk, __raw_readl(regs + SMBIDCYR));
+	bt->wstrd = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTRDR));
+	bt->wstoen = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTOENR));
+	bt->wstwen = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTWENR));
+	bt->wstbrd = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTBRDR));
+}
+
+/**
+ * bank_is_io - return true if bank is (possibly) IO.
+ * @bank: The bank number.
+ * @bankcfg: The value of S3C2412_EBI_BANKCFG.
+ */
+static inline bool bank_is_io(unsigned int bank, u32 bankcfg)
+{
+	if (bank < 2)
+		return true;
+
+	return !(bankcfg & (1 << bank));
+}
+
+int s3c2412_iotiming_get(struct s3c_cpufreq_config *cfg,
+			 struct s3c_iotimings *timings)
+{
+	struct s3c2412_iobank_timing *bt;
+	u32 bankcfg = __raw_readl(S3C2412_EBI_BANKCFG);
+	unsigned int bank;
+
+	/* look through all banks to see what is currently set. */
+
+	for (bank = 0; bank < MAX_BANKS; bank++) {
+		if (!bank_is_io(bank, bankcfg))
+			continue;
+
+		bt = kzalloc(sizeof(struct s3c2412_iobank_timing), GFP_KERNEL);
+		if (!bt) {
+			printk(KERN_ERR "%s: no memory for bank\n", __func__);
+			return -ENOMEM;
+		}
+
+		timings->bank[bank].io_2412 = bt;
+		s3c2412_iotiming_getbank(cfg, bt, bank);
+	}
+
+	s3c2412_print_timing("get", timings);
+	return 0;
+}
+
+/* this is in here as it is so small, it doesn't currently warrant a file
+ * to itself. We expect that any s3c24xx needing this is going to also
+ * need the iotiming support.
+ */
+void s3c2412_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
+{
+	struct s3c_cpufreq_board *board = cfg->board;
+	u32 refresh;
+
+	WARN_ON(board == NULL);
+
+	/* Reduce both the refresh time (in ns) and the frequency (in MHz)
+	 * down to ensure that we do not overflow 32 bit numbers.
+	 *
+	 * This should work for HCLK up to 133MHz and refresh period up
+	 * to 30usec.
+	 */
+
+	refresh = (cfg->freq.hclk / 100) * (board->refresh / 10);
+	refresh = DIV_ROUND_UP(refresh, (1000 * 1000)); /* apply scale  */
+	refresh &= ((1 << 16) - 1);
+
+	s3c_freq_dbg("%s: refresh value %u\n", __func__, (unsigned int)refresh);
+
+	__raw_writel(refresh, S3C2412_REFRESH);
+}
-- 
cgit v1.2.3


From f0176794b6abc2e5239c07a58cf11b6f43d0f185 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:38 +0100
Subject: ARM: S3C2410: Add S3C2410A sysdev.

Add a sysdev S3C2410A sysdev to allow the differentiation
of the S3C2410A from the S3C2410. This is needed for the
CPUFREQ code to enable the extra features and update cpu
specific information.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2410/dma.c                  | 11 +++++++++++
 arch/arm/mach-s3c2410/irq.c                  | 15 ++++++++++++++-
 arch/arm/mach-s3c2410/pm.c                   | 12 ++++++++++++
 arch/arm/mach-s3c2410/s3c2410.c              | 20 ++++++++++++++++++++
 arch/arm/plat-s3c/include/plat/cpu.h         |  1 +
 arch/arm/plat-s3c24xx/cpu.c                  |  2 +-
 arch/arm/plat-s3c24xx/include/plat/s3c2410.h |  1 +
 7 files changed, 60 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c
index dbf96e60d99..63b753f56c6 100644
--- a/arch/arm/mach-s3c2410/dma.c
+++ b/arch/arm/mach-s3c2410/dma.c
@@ -164,6 +164,17 @@ static int __init s3c2410_dma_drvinit(void)
 }
 
 arch_initcall(s3c2410_dma_drvinit);
+
+static struct sysdev_driver s3c2410a_dma_driver = {
+	.add	= s3c2410_dma_add,
+};
+
+static int __init s3c2410a_dma_drvinit(void)
+{
+	return sysdev_driver_register(&s3c2410a_sysclass, &s3c2410a_dma_driver);
+}
+
+arch_initcall(s3c2410a_dma_drvinit);
 #endif
 
 #if defined(CONFIG_CPU_S3C2442)
diff --git a/arch/arm/mach-s3c2410/irq.c b/arch/arm/mach-s3c2410/irq.c
index 92150399563..5e2f3533205 100644
--- a/arch/arm/mach-s3c2410/irq.c
+++ b/arch/arm/mach-s3c2410/irq.c
@@ -39,9 +39,22 @@ static struct sysdev_driver s3c2410_irq_driver = {
 	.resume		= s3c24xx_irq_resume,
 };
 
-static int s3c2410_irq_init(void)
+static int __init s3c2410_irq_init(void)
 {
 	return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_irq_driver);
 }
 
 arch_initcall(s3c2410_irq_init);
+
+static struct sysdev_driver s3c2410a_irq_driver = {
+	.add		= s3c2410_irq_add,
+	.suspend	= s3c24xx_irq_suspend,
+	.resume		= s3c24xx_irq_resume,
+};
+
+static int __init s3c2410a_irq_init(void)
+{
+	return sysdev_driver_register(&s3c2410a_sysclass, &s3c2410a_irq_driver);
+}
+
+arch_initcall(s3c2410a_irq_init);
diff --git a/arch/arm/mach-s3c2410/pm.c b/arch/arm/mach-s3c2410/pm.c
index 143e08a599d..966119c8efe 100644
--- a/arch/arm/mach-s3c2410/pm.c
+++ b/arch/arm/mach-s3c2410/pm.c
@@ -119,6 +119,18 @@ static int __init s3c2410_pm_drvinit(void)
 }
 
 arch_initcall(s3c2410_pm_drvinit);
+
+static struct sysdev_driver s3c2410a_pm_driver = {
+	.add		= s3c2410_pm_add,
+	.resume		= s3c2410_pm_resume,
+};
+
+static int __init s3c2410a_pm_drvinit(void)
+{
+	return sysdev_driver_register(&s3c2410a_sysclass, &s3c2410a_pm_driver);
+}
+
+arch_initcall(s3c2410a_pm_drvinit);
 #endif
 
 #if defined(CONFIG_CPU_S3C2440)
diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c
index feb141b1f91..e5724a22c35 100644
--- a/arch/arm/mach-s3c2410/s3c2410.c
+++ b/arch/arm/mach-s3c2410/s3c2410.c
@@ -116,6 +116,13 @@ struct sysdev_class s3c2410_sysclass = {
 	.name = "s3c2410-core",
 };
 
+/* Note, we would have liked to name this s3c2410-core, but we cannot
+ * register two sysdev_class with the same name.
+ */
+struct sysdev_class s3c2410a_sysclass = {
+	.name = "s3c2410a-core",
+};
+
 static struct sys_device s3c2410_sysdev = {
 	.cls		= &s3c2410_sysclass,
 };
@@ -133,9 +140,22 @@ static int __init s3c2410_core_init(void)
 
 core_initcall(s3c2410_core_init);
 
+static int __init s3c2410a_core_init(void)
+{
+	return sysdev_class_register(&s3c2410a_sysclass);
+}
+
+core_initcall(s3c2410a_core_init);
+
 int __init s3c2410_init(void)
 {
 	printk("S3C2410: Initialising architecture\n");
 
 	return sysdev_register(&s3c2410_sysdev);
 }
+
+int __init s3c2410a_init(void)
+{
+	s3c2410_sysdev.cls = &s3c2410a_sysclass;
+	return s3c2410_init();
+}
diff --git a/arch/arm/plat-s3c/include/plat/cpu.h b/arch/arm/plat-s3c/include/plat/cpu.h
index be541cbba07..fbc3d498e02 100644
--- a/arch/arm/plat-s3c/include/plat/cpu.h
+++ b/arch/arm/plat-s3c/include/plat/cpu.h
@@ -65,6 +65,7 @@ extern struct sys_timer s3c24xx_timer;
 /* system device classes */
 
 extern struct sysdev_class s3c2410_sysclass;
+extern struct sysdev_class s3c2410a_sysclass;
 extern struct sysdev_class s3c2412_sysclass;
 extern struct sysdev_class s3c2440_sysclass;
 extern struct sysdev_class s3c2442_sysclass;
diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c
index 1932b7e0da1..5447e60f393 100644
--- a/arch/arm/plat-s3c24xx/cpu.c
+++ b/arch/arm/plat-s3c24xx/cpu.c
@@ -81,7 +81,7 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.map_io		= s3c2410_map_io,
 		.init_clocks	= s3c2410_init_clocks,
 		.init_uarts	= s3c2410_init_uarts,
-		.init		= s3c2410_init,
+		.init		= s3c2410a_init,
 		.name		= name_s3c2410a
 	},
 	{
diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2410.h b/arch/arm/plat-s3c24xx/include/plat/s3c2410.h
index a9ac9e29759..b6deeef8f66 100644
--- a/arch/arm/plat-s3c24xx/include/plat/s3c2410.h
+++ b/arch/arm/plat-s3c24xx/include/plat/s3c2410.h
@@ -14,6 +14,7 @@
 #ifdef CONFIG_CPU_S3C2410
 
 extern  int s3c2410_init(void);
+extern  int s3c2410a_init(void);
 
 extern void s3c2410_map_io(void);
 
-- 
cgit v1.2.3


From ca0b4901d8faaf98cf254e25cd2784bcb21e46d5 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:39 +0100
Subject: ARM: BAST: CPUFREQ: Add board support

Add board support for CPUFREQ with the Simtec BAST board
registering the necessary information with the core.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2410/mach-bast.c | 9 +++++++++
 1 file changed, 9 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index ce3baba2cd7..d8a26ea92f2 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -59,6 +59,7 @@
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
+#include <plat/cpu-freq.h>
 
 #include "usb-simtec.h"
 #include "nor-simtec.h"
@@ -570,6 +571,12 @@ static struct clk *bast_clocks[] __initdata = {
 	&s3c24xx_uclk,
 };
 
+static struct s3c_cpufreq_board __initdata bast_cpufreq = {
+	.refresh	= 7800, /* 7.8usec */
+	.auto_io	= 1,
+	.need_io	= 1,
+};
+
 static void __init bast_map_io(void)
 {
 	/* initialise the clocks */
@@ -608,6 +615,8 @@ static void __init bast_init(void)
 
 	usb_simtec_init();
 	nor_simtec_init();
+
+	s3c_cpufreq_setboard(&bast_cpufreq);
 }
 
 MACHINE_START(BAST, "Simtec-BAST")
-- 
cgit v1.2.3


From ad78759529be38d6aa062233b980095cf74aa7f0 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:40 +0100
Subject: ARM: S3C2410: Add armclk for cpufreq support

Add armclk for use with the cpufreq support and anything
else that may want it. This clock is just a direct
descendant of fclk.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2410/s3c2410.c | 9 +++++++++
 1 file changed, 9 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c
index e5724a22c35..91ba42f688a 100644
--- a/arch/arm/mach-s3c2410/s3c2410.c
+++ b/arch/arm/mach-s3c2410/s3c2410.c
@@ -105,11 +105,20 @@ void __init_or_cpufreq s3c2410_setup_clocks(void)
 	s3c24xx_setup_clocks(fclk, hclk, pclk);
 }
 
+/* fake ARMCLK for use with cpufreq, etc. */
+
+static struct clk s3c2410_armclk = {
+	.name	= "armclk",
+	.parent	= &clk_f,
+	.id	= -1,
+};
+
 void __init s3c2410_init_clocks(int xtal)
 {
 	s3c24xx_register_baseclocks(xtal);
 	s3c2410_setup_clocks();
 	s3c2410_baseclk_add();
+	s3c24xx_register_clock(&s3c2410_armclk);
 }
 
 struct sysdev_class s3c2410_sysclass = {
-- 
cgit v1.2.3


From e6d197a6954c8a9ff85727c31ca61fc1da78628a Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 30 Jul 2009 23:23:42 +0100
Subject: ARM: S3C: CPUFREQ: Add debugfs support for cpufreq

Add debugfs support for the cpufreq driver to allow
information about the system state to be exported to
the user.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/Kconfig                                   |   6 +
 arch/arm/mach-s3c2410/cpu-freq.c                   |   2 +
 arch/arm/mach-s3c2412/cpu-freq.c                   |   2 +
 arch/arm/plat-s3c24xx/Makefile                     |   1 +
 arch/arm/plat-s3c24xx/cpu-freq-debugfs.c           | 199 +++++++++++++++++++++
 arch/arm/plat-s3c24xx/cpu-freq.c                   |  12 ++
 arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h |  24 +++
 arch/arm/plat-s3c24xx/s3c2410-iotiming.c           |  45 +++++
 arch/arm/plat-s3c24xx/s3c2412-iotiming.c           |  24 +++
 arch/arm/plat-s3c24xx/s3c2440-cpufreq.c            |   2 +
 10 files changed, 317 insertions(+)
 create mode 100644 arch/arm/plat-s3c24xx/cpu-freq-debugfs.c

(limited to 'arch')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index c7a83efef0b..f07a4ba281b 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1329,6 +1329,12 @@ config CPU_FREQ_S3C24XX_IODEBUG
 	help
 	  Enable s3c_freq_iodbg for the Samsung S3C CPUfreq core
 
+config CPU_FREQ_S3C24XX_DEBUGFS
+	bool "Export debugfs for CPUFreq"
+	depends on CPU_FREQ_S3C24XX && DEBUG_FS
+	help
+	  Export status information via debugfs.
+
 endif
 
 source "drivers/cpuidle/Kconfig"
diff --git a/arch/arm/mach-s3c2410/cpu-freq.c b/arch/arm/mach-s3c2410/cpu-freq.c
index f2cbdbab0df..9d1186877d0 100644
--- a/arch/arm/mach-s3c2410/cpu-freq.c
+++ b/arch/arm/mach-s3c2410/cpu-freq.c
@@ -111,6 +111,8 @@ static struct s3c_cpufreq_info s3c2410_cpufreq_info = {
 	.set_refresh	= s3c2410_cpufreq_setrefresh,
 	.set_divs	= s3c2410_cpufreq_setdivs,
 	.calc_divs	= s3c2410_cpufreq_calcdivs,
+
+	.debug_io_show	= s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs),
 };
 
 static int s3c2410_cpufreq_add(struct sys_device *sysdev)
diff --git a/arch/arm/mach-s3c2412/cpu-freq.c b/arch/arm/mach-s3c2412/cpu-freq.c
index 21a66178d9b..eb3ea172133 100644
--- a/arch/arm/mach-s3c2412/cpu-freq.c
+++ b/arch/arm/mach-s3c2412/cpu-freq.c
@@ -190,6 +190,8 @@ static struct s3c_cpufreq_info s3c2412_cpufreq_info = {
 	.get_iotiming	= s3c2412_iotiming_get,
 
 	.resume_clocks	= s3c2412_setup_clocks,
+
+	.debug_io_show  = s3c_cpufreq_debugfs_call(s3c2412_iotiming_debugfs),
 };
 
 static int s3c2412_cpufreq_add(struct sys_device *sysdev)
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index 8759c070fd9..f3493751580 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -21,6 +21,7 @@ obj-y				+= clock.o
 obj-$(CONFIG_S3C24XX_DCLK)	+= clock-dclk.o
 
 obj-$(CONFIG_CPU_FREQ_S3C24XX)	+= cpu-freq.o
+obj-$(CONFIG_CPU_FREQ_S3C24XX_DEBUGFS) += cpu-freq-debugfs.o
 
 # Architecture dependant builds
 
diff --git a/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c b/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c
new file mode 100644
index 00000000000..a9276667c2f
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c
@@ -0,0 +1,199 @@
+/* linux/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c
+ *
+ * Copyright (c) 2009 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX CPU Frequency scaling - debugfs status support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/cpufreq.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/err.h>
+
+#include <plat/cpu-freq-core.h>
+
+static struct dentry *dbgfs_root;
+static struct dentry *dbgfs_file_io;
+static struct dentry *dbgfs_file_info;
+static struct dentry *dbgfs_file_board;
+
+#define print_ns(x) ((x) / 10), ((x) % 10)
+
+static void show_max(struct seq_file *seq, struct s3c_freq *f)
+{
+	seq_printf(seq, "MAX: F=%lu, H=%lu, P=%lu, A=%lu\n",
+		   f->fclk, f->hclk, f->pclk, f->armclk);
+}
+
+static int board_show(struct seq_file *seq, void *p)
+{
+	struct s3c_cpufreq_config *cfg;
+	struct s3c_cpufreq_board *brd;
+
+	cfg = s3c_cpufreq_getconfig();
+	if (!cfg) {
+		seq_printf(seq, "no configuration registered\n");
+		return 0;
+	}
+
+	brd = cfg->board;
+	if (!brd) {
+		seq_printf(seq, "no board definition set?\n");
+		return 0;
+	}
+
+	seq_printf(seq, "SDRAM refresh %u ns\n", brd->refresh);
+	seq_printf(seq, "auto_io=%u\n", brd->auto_io);
+	seq_printf(seq, "need_io=%u\n", brd->need_io);
+
+	show_max(seq, &brd->max);
+
+
+	return 0;
+}
+
+static int fops_board_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, board_show, NULL);
+}
+
+static const struct file_operations fops_board = {
+	.open		= fops_board_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+	.owner		= THIS_MODULE,
+};
+
+static int info_show(struct seq_file *seq, void *p)
+{
+	struct s3c_cpufreq_config *cfg;
+
+	cfg = s3c_cpufreq_getconfig();
+	if (!cfg) {
+		seq_printf(seq, "no configuration registered\n");
+		return 0;
+	}
+
+	seq_printf(seq, "  FCLK %ld Hz\n", cfg->freq.fclk);
+	seq_printf(seq, "  HCLK %ld Hz (%lu.%lu ns)\n",
+		   cfg->freq.hclk, print_ns(cfg->freq.hclk_tns));
+	seq_printf(seq, "  PCLK %ld Hz\n", cfg->freq.hclk);
+	seq_printf(seq, "ARMCLK %ld Hz\n", cfg->freq.armclk);
+	seq_printf(seq, "\n");
+
+	show_max(seq, &cfg->max);
+
+	seq_printf(seq, "Divisors: P=%d, H=%d, A=%d, dvs=%s\n",
+		   cfg->divs.h_divisor, cfg->divs.p_divisor,
+		   cfg->divs.arm_divisor, cfg->divs.dvs ? "on" : "off");
+	seq_printf(seq, "\n");
+
+	seq_printf(seq, "lock_pll=%u\n", cfg->lock_pll);
+
+	return 0;
+}
+
+static int fops_info_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, info_show, NULL);
+}
+
+static const struct file_operations fops_info = {
+	.open		= fops_info_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+	.owner		= THIS_MODULE,
+};
+
+static int io_show(struct seq_file *seq, void *p)
+{
+	void (*show_bank)(struct seq_file *, struct s3c_cpufreq_config *, union s3c_iobank *);
+	struct s3c_cpufreq_config *cfg;
+	struct s3c_iotimings *iot;
+	union s3c_iobank *iob;
+	int bank;
+
+	cfg = s3c_cpufreq_getconfig();
+	if (!cfg) {
+		seq_printf(seq, "no configuration registered\n");
+		return 0;
+	}
+
+	show_bank = cfg->info->debug_io_show;
+	if (!show_bank) {
+		seq_printf(seq, "no code to show bank timing\n");
+		return 0;
+	}
+
+	iot = s3c_cpufreq_getiotimings();
+	if (!iot) {
+		seq_printf(seq, "no io timings registered\n");
+		return 0;
+	}
+
+	seq_printf(seq, "hclk period is %lu.%lu ns\n", print_ns(cfg->freq.hclk_tns));
+
+	for (bank = 0; bank < MAX_BANKS; bank++) {
+		iob = &iot->bank[bank];
+
+		seq_printf(seq, "bank %d: ", bank);
+
+		if (!iob->io_2410) {
+			seq_printf(seq, "nothing set\n");
+			continue;
+		}
+
+		show_bank(seq, cfg, iob);
+	}
+
+	return 0;
+}
+
+static int fops_io_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, io_show, NULL);
+}
+
+static const struct file_operations fops_io = {
+	.open		= fops_io_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+	.owner		= THIS_MODULE,
+};
+
+
+static int __init s3c_freq_debugfs_init(void)
+{
+	dbgfs_root = debugfs_create_dir("s3c-cpufreq", NULL);
+	if (IS_ERR(dbgfs_root)) {
+		printk(KERN_ERR "%s: error creating debugfs root\n", __func__);
+		return PTR_ERR(dbgfs_root);
+	}
+
+	dbgfs_file_io = debugfs_create_file("io-timing", S_IRUGO, dbgfs_root,
+					    NULL, &fops_io);
+
+	dbgfs_file_info = debugfs_create_file("info", S_IRUGO, dbgfs_root,
+					      NULL, &fops_info);
+
+	dbgfs_file_board = debugfs_create_file("board", S_IRUGO, dbgfs_root,
+					       NULL, &fops_board);
+
+	return 0;
+}
+
+late_initcall(s3c_freq_debugfs_init);
+
diff --git a/arch/arm/plat-s3c24xx/cpu-freq.c b/arch/arm/plat-s3c24xx/cpu-freq.c
index 40ff7e2569d..4f1b789a117 100644
--- a/arch/arm/plat-s3c24xx/cpu-freq.c
+++ b/arch/arm/plat-s3c24xx/cpu-freq.c
@@ -50,6 +50,18 @@ static struct clk *clk_hclk;
 static struct clk *clk_pclk;
 static struct clk *clk_arm;
 
+#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUGFS
+struct s3c_cpufreq_config *s3c_cpufreq_getconfig(void)
+{
+	return &cpu_cur;
+}
+
+struct s3c_iotimings *s3c_cpufreq_getiotimings(void)
+{
+	return &s3c24xx_iotiming;
+}
+#endif /* CONFIG_CPU_FREQ_S3C24XX_DEBUGFS */
+
 static void s3c_cpufreq_getcur(struct s3c_cpufreq_config *cfg)
 {
 	unsigned long fclk, pclk, hclk, armclk;
diff --git a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
index f02b3c06c1e..efeb025affc 100644
--- a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
+++ b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
@@ -13,6 +13,8 @@
 
 #include <plat/cpu-freq.h>
 
+struct seq_file;
+
 #define MAX_BANKS (8)
 #define S3C2412_MAX_IO	(8)
 
@@ -181,6 +183,10 @@ struct s3c_cpufreq_info {
 					  struct cpufreq_frequency_table *t,
 					  size_t table_size);
 
+	void		(*debug_io_show)(struct seq_file *seq,
+					 struct s3c_cpufreq_config *cfg,
+					 union s3c_iobank *iob);
+
 	void		(*set_refresh)(struct s3c_cpufreq_config *cfg);
 	void		(*set_fvco)(struct s3c_cpufreq_config *cfg);
 	void		(*set_divs)(struct s3c_cpufreq_config *cfg);
@@ -191,6 +197,24 @@ extern int s3c_cpufreq_register(struct s3c_cpufreq_info *info);
 
 extern int s3c_plltab_register(struct cpufreq_frequency_table *plls, unsigned int plls_no);
 
+/* exports and utilities for debugfs */
+extern struct s3c_cpufreq_config *s3c_cpufreq_getconfig(void);
+extern struct s3c_iotimings *s3c_cpufreq_getiotimings(void);
+
+extern void s3c2410_iotiming_debugfs(struct seq_file *seq,
+				     struct s3c_cpufreq_config *cfg,
+				     union s3c_iobank *iob);
+
+extern void s3c2412_iotiming_debugfs(struct seq_file *seq,
+				     struct s3c_cpufreq_config *cfg,
+				     union s3c_iobank *iob);
+
+#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUGFS
+#define s3c_cpufreq_debugfs_call(x) x
+#else
+#define s3c_cpufreq_debugfs_call(x) NULL
+#endif
+
 /* Useful utility functions. */
 
 extern struct clk *s3c_cpufreq_clk_get(struct device *, const char *);
diff --git a/arch/arm/plat-s3c24xx/s3c2410-iotiming.c b/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
index 26fe2129cf2..d0a3a145cd4 100644
--- a/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
+++ b/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
@@ -15,6 +15,7 @@
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/cpufreq.h>
+#include <linux/seq_file.h>
 #include <linux/io.h>
 
 #include <mach/map.h>
@@ -303,6 +304,50 @@ void s3c2410_iotiming_getbank(struct s3c_cpufreq_config *cfg,
 	bt->tacc = get_tacc(hclk, bankcon >> S3C2410_BANKCON_Tacc_SHIFT);
 }
 
+/**
+ * s3c2410_iotiming_debugfs - debugfs show io bank timing information
+ * @seq: The seq_file to write output to using seq_printf().
+ * @cfg: The current configuration.
+ * @iob: The IO bank information to decode.
+ */
+void s3c2410_iotiming_debugfs(struct seq_file *seq,
+			      struct s3c_cpufreq_config *cfg,
+			      union s3c_iobank *iob)
+{
+	struct s3c2410_iobank_timing *bt = iob->io_2410;
+	unsigned long bankcon = bt->bankcon;
+	unsigned long hclk = cfg->freq.hclk_tns;
+	unsigned int tacs;
+	unsigned int tcos;
+	unsigned int tacc;
+	unsigned int tcoh;
+	unsigned int tcah;
+
+	seq_printf(seq, "BANKCON=0x%08lx\n", bankcon);
+
+	tcah = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcah_SHIFT);
+	tcoh = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcoh_SHIFT);
+	tcos = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tcos_SHIFT);
+	tacs = get_0124(hclk, bankcon >> S3C2410_BANKCON_Tacs_SHIFT);
+	tacc = get_tacc(hclk, bankcon >> S3C2410_BANKCON_Tacc_SHIFT);
+
+	seq_printf(seq,
+		   "\tRead: Tacs=%d.%d, Tcos=%d.%d, Tacc=%d.%d, Tcoh=%d.%d, Tcah=%d.%d\n",
+		   print_ns(bt->tacs),
+		   print_ns(bt->tcos),
+		   print_ns(bt->tacc),
+		   print_ns(bt->tcoh),
+		   print_ns(bt->tcah));
+
+	seq_printf(seq,
+		   "\t Set: Tacs=%d.%d, Tcos=%d.%d, Tacc=%d.%d, Tcoh=%d.%d, Tcah=%d.%d\n",
+		   print_ns(tacs),
+		   print_ns(tcos),
+		   print_ns(tacc),
+		   print_ns(tcoh),
+		   print_ns(tcah));
+}
+
 /**
  * s3c2410_iotiming_calc - Calculate bank timing for frequency change.
  * @cfg: The frequency configuration
diff --git a/arch/arm/plat-s3c24xx/s3c2412-iotiming.c b/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
index a3648cba0eb..fd45e47facb 100644
--- a/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
+++ b/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
@@ -16,6 +16,7 @@
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
 #include <linux/cpufreq.h>
+#include <linux/seq_file.h>
 #include <linux/sysdev.h>
 #include <linux/delay.h>
 #include <linux/clk.h>
@@ -108,6 +109,29 @@ static int s3c2412_calc_bank(struct s3c_cpufreq_config *cfg,
 	return err;
 }
 
+/**
+ * s3c2412_iotiming_debugfs - debugfs show io bank timing information
+ * @seq: The seq_file to write output to using seq_printf().
+ * @cfg: The current configuration.
+ * @iob: The IO bank information to decode.
+*/
+void s3c2412_iotiming_debugfs(struct seq_file *seq,
+			      struct s3c_cpufreq_config *cfg,
+			      union s3c_iobank *iob)
+{
+	struct s3c2412_iobank_timing *bt = iob->io_2412;
+
+	seq_printf(seq,
+		   "\tRead: idcy=%d.%d wstrd=%d.%d wstwr=%d,%d"
+		   "wstoen=%d.%d wstwen=%d.%d wstbrd=%d.%d\n",
+		   print_ns(bt->idcy),
+		   print_ns(bt->wstrd),
+		   print_ns(bt->wstwr),
+		   print_ns(bt->wstoen),
+		   print_ns(bt->wstwen),
+		   print_ns(bt->wstbrd));
+}
+
 /**
  * s3c2412_iotiming_calc - calculate all the bank divisor settings.
  * @cfg: The current frequency configuration.
diff --git a/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c b/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c
index c177a20319e..ae2e6c604f2 100644
--- a/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c
+++ b/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c
@@ -266,6 +266,8 @@ struct s3c_cpufreq_info s3c2440_cpufreq_info = {
 	.calc_freqtable	= s3c2440_cpufreq_calctable,
 
 	.resume_clocks	= s3c244x_setup_clocks,
+
+	.debug_io_show  = s3c_cpufreq_debugfs_call(s3c2410_iotiming_debugfs),
 };
 
 static int s3c2440_cpufreq_add(struct sys_device *sysdev)
-- 
cgit v1.2.3


From 2896bda4824c1e4d34852e355916e34671e38a11 Mon Sep 17 00:00:00 2001
From: Peter Korsgaard <jacmet@sunsite.dk>
Date: Wed, 1 Jul 2009 17:47:09 +0200
Subject: ARM: S3C6410: airgoo hmt board support

Add support for the Airgoo HMT (home media terminal) device.
The HMT is a tablet device with a s3c6410, a 7" LCD and a number
of peripheral connections.

For more details of the hardware specs, see:
http://article.gmane.org/gmane.linux.debian.devel.embedded/4307

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[ben-linux@fluff.org: subject rewrite]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c6410/Kconfig    |  10 ++
 arch/arm/mach-s3c6410/Makefile   |   3 +-
 arch/arm/mach-s3c6410/mach-hmt.c | 276 +++++++++++++++++++++++++++++++++++++++
 3 files changed, 287 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm/mach-s3c6410/mach-hmt.c

(limited to 'arch')

diff --git a/arch/arm/mach-s3c6410/Kconfig b/arch/arm/mach-s3c6410/Kconfig
index e63aac7f4e5..f9d0f09f976 100644
--- a/arch/arm/mach-s3c6410/Kconfig
+++ b/arch/arm/mach-s3c6410/Kconfig
@@ -97,3 +97,13 @@ config MACH_NCP
 	select S3C64XX_SETUP_I2C1
 	help
           Machine support for the Samsung NCP
+
+config MACH_HMT
+	bool "Airgoo HMT"
+	select CPU_S3C6410
+	select S3C_DEV_FB
+	select S3C_DEV_USB_HOST
+	select S3C64XX_SETUP_FB_24BPP
+	select HAVE_PWM
+	help
+	  Machine support for the Airgoo HMT
diff --git a/arch/arm/mach-s3c6410/Makefile b/arch/arm/mach-s3c6410/Makefile
index 6f9deac8861..3e48c3dbf97 100644
--- a/arch/arm/mach-s3c6410/Makefile
+++ b/arch/arm/mach-s3c6410/Makefile
@@ -23,5 +23,4 @@ obj-$(CONFIG_S3C6410_SETUP_SDHCI)	+= setup-sdhci.o
 obj-$(CONFIG_MACH_ANW6410)	+= mach-anw6410.o
 obj-$(CONFIG_MACH_SMDK6410)	+= mach-smdk6410.o
 obj-$(CONFIG_MACH_NCP)		+= mach-ncp.o
-
-
+obj-$(CONFIG_MACH_HMT)		+= mach-hmt.o
diff --git a/arch/arm/mach-s3c6410/mach-hmt.c b/arch/arm/mach-s3c6410/mach-hmt.c
new file mode 100644
index 00000000000..c5741056193
--- /dev/null
+++ b/arch/arm/mach-s3c6410/mach-hmt.c
@@ -0,0 +1,276 @@
+/* mach-hmt.c - Platform code for Airgoo HMT
+ *
+ * Copyright 2009 Peter Korsgaard <jacmet@sunsite.dk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/leds.h>
+#include <linux/pwm_backlight.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-fb.h>
+#include <mach/map.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+#include <plat/iic.h>
+#include <plat/fb.h>
+#include <plat/nand.h>
+
+#include <plat/s3c6410.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+#define UCON S3C2410_UCON_DEFAULT
+#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE)
+#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
+
+static struct s3c2410_uartcfg hmt_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[2] = {
+		.hwport	     = 2,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+};
+
+static int hmt_bl_init(struct device *dev)
+{
+	int ret;
+
+	ret = gpio_request(S3C64XX_GPB(4), "lcd backlight enable");
+	if (!ret)
+		ret = gpio_direction_output(S3C64XX_GPB(4), 0);
+
+	return ret;
+}
+
+static int hmt_bl_notify(int brightness)
+{
+	/*
+	 * translate from CIELUV/CIELAB L*->brightness, E.G. from
+	 * perceived luminance to light output. Assumes range 0..25600
+	 */
+	if (brightness < 0x800) {
+		/* Y = Yn * L / 903.3 */
+		brightness = (100*256 * brightness + 231245/2) / 231245;
+	} else {
+		/* Y = Yn * ((L + 16) / 116 )^3 */
+		int t = (brightness*4 + 16*1024 + 58)/116;
+		brightness = 25 * ((t * t * t + 0x100000/2) / 0x100000);
+	}
+
+	gpio_set_value(S3C64XX_GPB(4), brightness);
+
+	return brightness;
+}
+
+static void hmt_bl_exit(struct device *dev)
+{
+	gpio_free(S3C64XX_GPB(4));
+}
+
+static struct platform_pwm_backlight_data hmt_backlight_data = {
+	.pwm_id		= 1,
+	.max_brightness	= 100 * 256,
+	.dft_brightness	= 40 * 256,
+	.pwm_period_ns	= 1000000000 / (100 * 256 * 20),
+	.init		= hmt_bl_init,
+	.notify		= hmt_bl_notify,
+	.exit		= hmt_bl_exit,
+
+};
+
+static struct platform_device hmt_backlight_device = {
+	.name		= "pwm-backlight",
+	.dev		= {
+		.parent	= &s3c_device_timer[1].dev,
+		.platform_data = &hmt_backlight_data,
+	},
+};
+
+static struct s3c_fb_pd_win hmt_fb_win0 = {
+	.win_mode	= {
+		.pixclock	= 41094,
+		.left_margin	= 8,
+		.right_margin	= 13,
+		.upper_margin	= 7,
+		.lower_margin	= 5,
+		.hsync_len	= 3,
+		.vsync_len	= 1,
+		.xres		= 800,
+		.yres		= 480,
+	},
+	.max_bpp	= 32,
+	.default_bpp	= 16,
+};
+
+/* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */
+static struct s3c_fb_platdata hmt_lcd_pdata __initdata = {
+	.setup_gpio	= s3c64xx_fb_gpio_setup_24bpp,
+	.win[0]		= &hmt_fb_win0,
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+};
+
+static struct mtd_partition hmt_nand_part[] = {
+	[0] = {
+		.name	= "uboot",
+		.size	= SZ_512K,
+		.offset	= 0,
+	},
+	[1] = {
+		.name	= "uboot-env1",
+		.size	= SZ_256K,
+		.offset	= SZ_512K,
+	},
+	[2] = {
+		.name	= "uboot-env2",
+		.size	= SZ_256K,
+		.offset	= SZ_512K + SZ_256K,
+	},
+	[3] = {
+		.name	= "kernel",
+		.size	= SZ_2M,
+		.offset	= SZ_1M,
+	},
+	[4] = {
+		.name	= "rootfs",
+		.size	= MTDPART_SIZ_FULL,
+		.offset	= SZ_1M + SZ_2M,
+	},
+};
+
+static struct s3c2410_nand_set hmt_nand_sets[] = {
+	[0] = {
+		.name		= "nand",
+		.nr_chips	= 1,
+		.nr_partitions	= ARRAY_SIZE(hmt_nand_part),
+		.partitions	= hmt_nand_part,
+	},
+};
+
+static struct s3c2410_platform_nand hmt_nand_info = {
+	.tacls		= 25,
+	.twrph0		= 55,
+	.twrph1		= 40,
+	.nr_sets	= ARRAY_SIZE(hmt_nand_sets),
+	.sets		= hmt_nand_sets,
+};
+
+static struct gpio_led hmt_leds[] = {
+	{ /* left function keys */
+		.name			= "left:blue",
+		.gpio			= S3C64XX_GPO(12),
+		.default_trigger	= "default-on",
+	},
+	{ /* right function keys - red */
+		.name			= "right:red",
+		.gpio			= S3C64XX_GPO(13),
+	},
+	{ /* right function keys - green */
+		.name			= "right:green",
+		.gpio			= S3C64XX_GPO(14),
+	},
+	{ /* right function keys - blue */
+		.name			= "right:blue",
+		.gpio			= S3C64XX_GPO(15),
+		.default_trigger	= "default-on",
+	},
+};
+
+static struct gpio_led_platform_data hmt_led_data = {
+	.num_leds = ARRAY_SIZE(hmt_leds),
+	.leds = hmt_leds,
+};
+
+static struct platform_device hmt_leds_device = {
+	.name			= "leds-gpio",
+	.id			= -1,
+	.dev.platform_data	= &hmt_led_data,
+};
+
+static struct map_desc hmt_iodesc[] = {};
+
+static struct platform_device *hmt_devices[] __initdata = {
+	&s3c_device_i2c0,
+	&s3c_device_nand,
+	&s3c_device_fb,
+	&s3c_device_usb,
+	&s3c_device_timer[1],
+	&hmt_backlight_device,
+	&hmt_leds_device,
+};
+
+static void __init hmt_map_io(void)
+{
+	s3c64xx_init_io(hmt_iodesc, ARRAY_SIZE(hmt_iodesc));
+	s3c24xx_init_clocks(12000000);
+	s3c24xx_init_uarts(hmt_uartcfgs, ARRAY_SIZE(hmt_uartcfgs));
+}
+
+static void __init hmt_machine_init(void)
+{
+	s3c_i2c0_set_platdata(NULL);
+	s3c_fb_set_platdata(&hmt_lcd_pdata);
+	s3c_device_nand.dev.platform_data = &hmt_nand_info;
+
+	gpio_request(S3C64XX_GPC(7), "usb power");
+	gpio_direction_output(S3C64XX_GPC(7), 0);
+	gpio_request(S3C64XX_GPM(0), "usb power");
+	gpio_direction_output(S3C64XX_GPM(0), 1);
+	gpio_request(S3C64XX_GPK(7), "usb power");
+	gpio_direction_output(S3C64XX_GPK(7), 1);
+	gpio_request(S3C64XX_GPF(13), "usb power");
+	gpio_direction_output(S3C64XX_GPF(13), 1);
+
+	platform_add_devices(hmt_devices, ARRAY_SIZE(hmt_devices));
+}
+
+MACHINE_START(HMT, "Airgoo-HMT")
+	/* Maintainer: Peter Korsgaard <jacmet@sunsite.dk> */
+	.phys_io	= S3C_PA_UART & 0xfff00000,
+	.io_pg_offst	= (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
+	.init_irq	= s3c6410_init_irq,
+	.map_io		= hmt_map_io,
+	.init_machine	= hmt_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
-- 
cgit v1.2.3


From 14077ea63b5aea1db0142c1085d24aa0d11b9d36 Mon Sep 17 00:00:00 2001
From: Peter Korsgaard <jacmet@sunsite.dk>
Date: Wed, 1 Jul 2009 17:47:06 +0200
Subject: ARM: S3C: move s3c_device_nand from plat-s3c24xx to plat-s3c

Move the s3c_device_nand platform device from plat-s3c24xx to plat-s3c,
now that the nand driver also support the s3c64xx devices.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2410/include/mach/map.h |  1 +
 arch/arm/mach-s3c24a0/include/mach/map.h |  1 +
 arch/arm/mach-s3c6400/include/mach/map.h |  2 ++
 arch/arm/mach-s3c6400/s3c6400.c          |  2 ++
 arch/arm/mach-s3c6410/cpu.c              |  2 ++
 arch/arm/plat-s3c/Makefile               |  1 +
 arch/arm/plat-s3c/dev-nand.c             | 30 ++++++++++++++++++++++++++++++
 arch/arm/plat-s3c24xx/devs.c             | 19 -------------------
 8 files changed, 39 insertions(+), 19 deletions(-)
 create mode 100644 arch/arm/plat-s3c/dev-nand.c

(limited to 'arch')

diff --git a/arch/arm/mach-s3c2410/include/mach/map.h b/arch/arm/mach-s3c2410/include/mach/map.h
index e99b212cb1c..e9821850065 100644
--- a/arch/arm/mach-s3c2410/include/mach/map.h
+++ b/arch/arm/mach-s3c2410/include/mach/map.h
@@ -103,5 +103,6 @@
 #define S3C_PA_UART	    S3C24XX_PA_UART
 #define S3C_PA_USBHOST	S3C2410_PA_USBHOST
 #define S3C_PA_HSMMC0	    S3C2443_PA_HSMMC
+#define S3C_PA_NAND	    S3C24XX_PA_NAND
 
 #endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s3c24a0/include/mach/map.h b/arch/arm/mach-s3c24a0/include/mach/map.h
index a01132717e3..79e4d93ea2b 100644
--- a/arch/arm/mach-s3c24a0/include/mach/map.h
+++ b/arch/arm/mach-s3c24a0/include/mach/map.h
@@ -81,5 +81,6 @@
 
 #define S3C_PA_UART		S3C24A0_PA_UART
 #define S3C_PA_IIC		S3C24A0_PA_IIC
+#define S3C_PA_NAND		S3C24XX_PA_NAND
 
 #endif /* __ASM_ARCH_24A0_MAP_H */
diff --git a/arch/arm/mach-s3c6400/include/mach/map.h b/arch/arm/mach-s3c6400/include/mach/map.h
index 5057d9948d3..fba241a7198 100644
--- a/arch/arm/mach-s3c6400/include/mach/map.h
+++ b/arch/arm/mach-s3c6400/include/mach/map.h
@@ -38,6 +38,7 @@
 #define S3C_VA_UART2		S3C_VA_UARTx(2)
 #define S3C_VA_UART3		S3C_VA_UARTx(3)
 
+#define S3C64XX_PA_NAND		(0x70200000)
 #define S3C64XX_PA_FB		(0x77100000)
 #define S3C64XX_PA_USB_HSOTG	(0x7C000000)
 #define S3C64XX_PA_WATCHDOG	(0x7E004000)
@@ -72,6 +73,7 @@
 #define S3C_PA_HSMMC2		S3C64XX_PA_HSMMC2
 #define S3C_PA_IIC		S3C64XX_PA_IIC0
 #define S3C_PA_IIC1		S3C64XX_PA_IIC1
+#define S3C_PA_NAND		S3C64XX_PA_NAND
 #define S3C_PA_FB		S3C64XX_PA_FB
 #define S3C_PA_USBHOST		S3C64XX_PA_USBHOST
 #define S3C_PA_USB_HSOTG	S3C64XX_PA_USB_HSOTG
diff --git a/arch/arm/mach-s3c6400/s3c6400.c b/arch/arm/mach-s3c6400/s3c6400.c
index 1ece887d90b..b42bdd0f213 100644
--- a/arch/arm/mach-s3c6400/s3c6400.c
+++ b/arch/arm/mach-s3c6400/s3c6400.c
@@ -48,6 +48,8 @@ void __init s3c6400_map_io(void)
 
 	/* the i2c devices are directly compatible with s3c2440 */
 	s3c_i2c0_setname("s3c2440-i2c");
+
+	s3c_device_nand.name = "s3c6400-nand";
 }
 
 void __init s3c6400_init_clocks(int xtal)
diff --git a/arch/arm/mach-s3c6410/cpu.c b/arch/arm/mach-s3c6410/cpu.c
index ade904de889..9b67c663d9d 100644
--- a/arch/arm/mach-s3c6410/cpu.c
+++ b/arch/arm/mach-s3c6410/cpu.c
@@ -62,6 +62,8 @@ void __init s3c6410_map_io(void)
 	/* the i2c devices are directly compatible with s3c2440 */
 	s3c_i2c0_setname("s3c2440-i2c");
 	s3c_i2c1_setname("s3c2440-i2c");
+
+	s3c_device_nand.name = "s3c6400-nand";
 }
 
 void __init s3c6410_init_clocks(int xtal)
diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile
index 0761766b183..d0b4a0fda5c 100644
--- a/arch/arm/plat-s3c/Makefile
+++ b/arch/arm/plat-s3c/Makefile
@@ -38,3 +38,4 @@ obj-$(CONFIG_SND_S3C64XX_SOC_I2S)	+= dev-audio.o
 obj-$(CONFIG_S3C_DEV_FB)	+= dev-fb.o
 obj-$(CONFIG_S3C_DEV_USB_HOST)	+= dev-usb.o
 obj-$(CONFIG_S3C_DEV_USB_HSOTG)	+= dev-usb-hsotg.o
+obj-y				+= dev-nand.o
diff --git a/arch/arm/plat-s3c/dev-nand.c b/arch/arm/plat-s3c/dev-nand.c
new file mode 100644
index 00000000000..4e532373243
--- /dev/null
+++ b/arch/arm/plat-s3c/dev-nand.c
@@ -0,0 +1,30 @@
+/*
+ * S3C series device definition for nand device
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+#include <mach/map.h>
+#include <plat/devs.h>
+
+static struct resource s3c_nand_resource[] = {
+	[0] = {
+		.start = S3C_PA_NAND,
+		.end   = S3C_PA_NAND + SZ_1M,
+		.flags = IORESOURCE_MEM,
+	}
+};
+
+struct platform_device s3c_device_nand = {
+	.name		  = "s3c2410-nand",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(s3c_nand_resource),
+	.resource	  = s3c_nand_resource,
+};
+
+EXPORT_SYMBOL(s3c_device_nand);
diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c
index 4eb378c89a3..20c114d6f61 100644
--- a/arch/arm/plat-s3c24xx/devs.c
+++ b/arch/arm/plat-s3c24xx/devs.c
@@ -180,25 +180,6 @@ void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *pd)
 	}
 }
 
-/* NAND Controller */
-
-static struct resource s3c_nand_resource[] = {
-	[0] = {
-		.start = S3C24XX_PA_NAND,
-		.end   = S3C24XX_PA_NAND + S3C24XX_SZ_NAND - 1,
-		.flags = IORESOURCE_MEM,
-	}
-};
-
-struct platform_device s3c_device_nand = {
-	.name		  = "s3c2410-nand",
-	.id		  = -1,
-	.num_resources	  = ARRAY_SIZE(s3c_nand_resource),
-	.resource	  = s3c_nand_resource,
-};
-
-EXPORT_SYMBOL(s3c_device_nand);
-
 /* USB Device (Gadget)*/
 
 static struct resource s3c_usbgadget_resource[] = {
-- 
cgit v1.2.3


From b5ead1cda64336b589eb4353e00f69c818fb6603 Mon Sep 17 00:00:00 2001
From: Peter Korsgaard <jacmet@sunsite.dk>
Date: Wed, 1 Jul 2009 17:47:07 +0200
Subject: ARM: S3C: move timer/pwm handling from plat-s3c24xx to plat-s3c

The s3c64xx devices use the same hardware core as s3c24xx, so move
the timer/pwm handling to plat-s3c so it can be used by both.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c/Makefile     |   4 +
 arch/arm/plat-s3c/pwm.c        | 406 +++++++++++++++++++++++++++++++++++++++++
 arch/arm/plat-s3c24xx/Makefile |   1 -
 arch/arm/plat-s3c24xx/pwm.c    | 405 ----------------------------------------
 4 files changed, 410 insertions(+), 406 deletions(-)
 create mode 100644 arch/arm/plat-s3c/pwm.c
 delete mode 100644 arch/arm/plat-s3c24xx/pwm.c

(limited to 'arch')

diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile
index d0b4a0fda5c..3e27720ae35 100644
--- a/arch/arm/plat-s3c/Makefile
+++ b/arch/arm/plat-s3c/Makefile
@@ -28,6 +28,10 @@ obj-$(CONFIG_PM)		+= pm.o
 obj-$(CONFIG_PM)		+= pm-gpio.o
 obj-$(CONFIG_S3C2410_PM_CHECK)	+= pm-check.o
 
+# PWM support
+
+obj-$(CONFIG_HAVE_PWM)		+= pwm.o
+
 # devices
 
 obj-$(CONFIG_S3C_DEV_HSMMC)	+= dev-hsmmc.o
diff --git a/arch/arm/plat-s3c/pwm.c b/arch/arm/plat-s3c/pwm.c
new file mode 100644
index 00000000000..f3d37ac5595
--- /dev/null
+++ b/arch/arm/plat-s3c/pwm.c
@@ -0,0 +1,406 @@
+/* arch/arm/plat-s3c/pwm.c
+ *
+ * Copyright (c) 2007 Ben Dooks
+ * Copyright (c) 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>, <ben-linux@fluff.org>
+ *
+ * S3C series PWM device core
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+*/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/pwm.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include <plat/devs.h>
+#include <plat/regs-timer.h>
+
+struct pwm_device {
+	struct list_head	 list;
+	struct platform_device	*pdev;
+
+	struct clk		*clk_div;
+	struct clk		*clk;
+	const char		*label;
+
+	unsigned int		 period_ns;
+	unsigned int		 duty_ns;
+
+	unsigned char		 tcon_base;
+	unsigned char		 running;
+	unsigned char		 use_count;
+	unsigned char		 pwm_id;
+};
+
+#define pwm_dbg(_pwm, msg...) dev_dbg(&(_pwm)->pdev->dev, msg)
+
+static struct clk *clk_scaler[2];
+
+/* Standard setup for a timer block. */
+
+#define TIMER_RESOURCE_SIZE (1)
+
+#define TIMER_RESOURCE(_tmr, _irq)			\
+	(struct resource [TIMER_RESOURCE_SIZE]) {	\
+		[0] = {					\
+			.start	= _irq,			\
+			.end	= _irq,			\
+			.flags	= IORESOURCE_IRQ	\
+		}					\
+	}
+
+#define DEFINE_S3C_TIMER(_tmr_no, _irq)			\
+	.name		= "s3c24xx-pwm",		\
+	.id		= _tmr_no,			\
+	.num_resources	= TIMER_RESOURCE_SIZE,		\
+	.resource	= TIMER_RESOURCE(_tmr_no, _irq),	\
+
+/* since we already have an static mapping for the timer, we do not
+ * bother setting any IO resource for the base.
+ */
+
+struct platform_device s3c_device_timer[] = {
+	[0] = { DEFINE_S3C_TIMER(0, IRQ_TIMER0) },
+	[1] = { DEFINE_S3C_TIMER(1, IRQ_TIMER1) },
+	[2] = { DEFINE_S3C_TIMER(2, IRQ_TIMER2) },
+	[3] = { DEFINE_S3C_TIMER(3, IRQ_TIMER3) },
+	[4] = { DEFINE_S3C_TIMER(4, IRQ_TIMER4) },
+};
+
+static inline int pwm_is_tdiv(struct pwm_device *pwm)
+{
+	return clk_get_parent(pwm->clk) == pwm->clk_div;
+}
+
+static DEFINE_MUTEX(pwm_lock);
+static LIST_HEAD(pwm_list);
+
+struct pwm_device *pwm_request(int pwm_id, const char *label)
+{
+	struct pwm_device *pwm;
+	int found = 0;
+
+	mutex_lock(&pwm_lock);
+
+	list_for_each_entry(pwm, &pwm_list, list) {
+		if (pwm->pwm_id == pwm_id) {
+			found = 1;
+			break;
+		}
+	}
+
+	if (found) {
+		if (pwm->use_count == 0) {
+			pwm->use_count = 1;
+			pwm->label = label;
+		} else
+			pwm = ERR_PTR(-EBUSY);
+	} else
+		pwm = ERR_PTR(-ENOENT);
+
+	mutex_unlock(&pwm_lock);
+	return pwm;
+}
+
+EXPORT_SYMBOL(pwm_request);
+
+
+void pwm_free(struct pwm_device *pwm)
+{
+	mutex_lock(&pwm_lock);
+
+	if (pwm->use_count) {
+		pwm->use_count--;
+		pwm->label = NULL;
+	} else
+		printk(KERN_ERR "PWM%d device already freed\n", pwm->pwm_id);
+
+	mutex_unlock(&pwm_lock);
+}
+
+EXPORT_SYMBOL(pwm_free);
+
+#define pwm_tcon_start(pwm) (1 << (pwm->tcon_base + 0))
+#define pwm_tcon_invert(pwm) (1 << (pwm->tcon_base + 2))
+#define pwm_tcon_autoreload(pwm) (1 << (pwm->tcon_base + 3))
+#define pwm_tcon_manulupdate(pwm) (1 << (pwm->tcon_base + 1))
+
+int pwm_enable(struct pwm_device *pwm)
+{
+	unsigned long flags;
+	unsigned long tcon;
+
+	local_irq_save(flags);
+
+	tcon = __raw_readl(S3C2410_TCON);
+	tcon |= pwm_tcon_start(pwm);
+	__raw_writel(tcon, S3C2410_TCON);
+
+	local_irq_restore(flags);
+
+	pwm->running = 1;
+	return 0;
+}
+
+EXPORT_SYMBOL(pwm_enable);
+
+void pwm_disable(struct pwm_device *pwm)
+{
+	unsigned long flags;
+	unsigned long tcon;
+
+	local_irq_save(flags);
+
+	tcon = __raw_readl(S3C2410_TCON);
+	tcon &= ~pwm_tcon_start(pwm);
+	__raw_writel(tcon, S3C2410_TCON);
+
+	local_irq_restore(flags);
+
+	pwm->running = 0;
+}
+
+EXPORT_SYMBOL(pwm_disable);
+
+static unsigned long pwm_calc_tin(struct pwm_device *pwm, unsigned long freq)
+{
+	unsigned long tin_parent_rate;
+	unsigned int div;
+
+	tin_parent_rate = clk_get_rate(clk_get_parent(pwm->clk_div));
+	pwm_dbg(pwm, "tin parent at %lu\n", tin_parent_rate);
+
+	for (div = 2; div <= 16; div *= 2) {
+		if ((tin_parent_rate / (div << 16)) < freq)
+			return tin_parent_rate / div;
+	}
+
+	return tin_parent_rate / 16;
+}
+
+#define NS_IN_HZ (1000000000UL)
+
+int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
+{
+	unsigned long tin_rate;
+	unsigned long tin_ns;
+	unsigned long period;
+	unsigned long flags;
+	unsigned long tcon;
+	unsigned long tcnt;
+	long tcmp;
+
+	/* We currently avoid using 64bit arithmetic by using the
+	 * fact that anything faster than 1Hz is easily representable
+	 * by 32bits. */
+
+	if (period_ns > NS_IN_HZ || duty_ns > NS_IN_HZ)
+		return -ERANGE;
+
+	if (duty_ns > period_ns)
+		return -EINVAL;
+
+	if (period_ns == pwm->period_ns &&
+	    duty_ns == pwm->duty_ns)
+		return 0;
+
+	/* The TCMP and TCNT can be read without a lock, they're not
+	 * shared between the timers. */
+
+	tcmp = __raw_readl(S3C2410_TCMPB(pwm->pwm_id));
+	tcnt = __raw_readl(S3C2410_TCNTB(pwm->pwm_id));
+
+	period = NS_IN_HZ / period_ns;
+
+	pwm_dbg(pwm, "duty_ns=%d, period_ns=%d (%lu)\n",
+		duty_ns, period_ns, period);
+
+	/* Check to see if we are changing the clock rate of the PWM */
+
+	if (pwm->period_ns != period_ns) {
+		if (pwm_is_tdiv(pwm)) {
+			tin_rate = pwm_calc_tin(pwm, period);
+			clk_set_rate(pwm->clk_div, tin_rate);
+		} else
+			tin_rate = clk_get_rate(pwm->clk);
+
+		pwm->period_ns = period_ns;
+
+		pwm_dbg(pwm, "tin_rate=%lu\n", tin_rate);
+
+		tin_ns = NS_IN_HZ / tin_rate;
+		tcnt = period_ns / tin_ns;
+	} else
+		tin_ns = NS_IN_HZ / clk_get_rate(pwm->clk);
+
+	/* Note, counters count down */
+
+	tcmp = duty_ns / tin_ns;
+	tcmp = tcnt - tcmp;
+
+	pwm_dbg(pwm, "tin_ns=%lu, tcmp=%ld/%lu\n", tin_ns, tcmp, tcnt);
+
+	if (tcmp < 0)
+		tcmp = 0;
+
+	/* Update the PWM register block. */
+
+	local_irq_save(flags);
+
+	__raw_writel(tcmp, S3C2410_TCMPB(pwm->pwm_id));
+	__raw_writel(tcnt, S3C2410_TCNTB(pwm->pwm_id));
+
+	tcon = __raw_readl(S3C2410_TCON);
+	tcon |= pwm_tcon_manulupdate(pwm);
+	tcon |= pwm_tcon_autoreload(pwm);
+	__raw_writel(tcon, S3C2410_TCON);
+
+	tcon &= ~pwm_tcon_manulupdate(pwm);
+	__raw_writel(tcon, S3C2410_TCON);
+
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+EXPORT_SYMBOL(pwm_config);
+
+static int pwm_register(struct pwm_device *pwm)
+{
+	pwm->duty_ns = -1;
+	pwm->period_ns = -1;
+
+	mutex_lock(&pwm_lock);
+	list_add_tail(&pwm->list, &pwm_list);
+	mutex_unlock(&pwm_lock);
+
+	return 0;
+}
+
+static int s3c_pwm_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct pwm_device *pwm;
+	unsigned long flags;
+	unsigned long tcon;
+	unsigned int id = pdev->id;
+	int ret;
+
+	if (id == 4) {
+		dev_err(dev, "TIMER4 is currently not supported\n");
+		return -ENXIO;
+	}
+
+	pwm = kzalloc(sizeof(struct pwm_device), GFP_KERNEL);
+	if (pwm == NULL) {
+		dev_err(dev, "failed to allocate pwm_device\n");
+		return -ENOMEM;
+	}
+
+	pwm->pdev = pdev;
+	pwm->pwm_id = id;
+
+	/* calculate base of control bits in TCON */
+	pwm->tcon_base = id == 0 ? 0 : (id * 4) + 4;
+
+	pwm->clk = clk_get(dev, "pwm-tin");
+	if (IS_ERR(pwm->clk)) {
+		dev_err(dev, "failed to get pwm tin clk\n");
+		ret = PTR_ERR(pwm->clk);
+		goto err_alloc;
+	}
+
+	pwm->clk_div = clk_get(dev, "pwm-tdiv");
+	if (IS_ERR(pwm->clk_div)) {
+		dev_err(dev, "failed to get pwm tdiv clk\n");
+		ret = PTR_ERR(pwm->clk_div);
+		goto err_clk_tin;
+	}
+
+	local_irq_save(flags);
+
+	tcon = __raw_readl(S3C2410_TCON);
+	tcon |= pwm_tcon_invert(pwm);
+	__raw_writel(tcon, S3C2410_TCON);
+
+	local_irq_restore(flags);
+
+
+	ret = pwm_register(pwm);
+	if (ret) {
+		dev_err(dev, "failed to register pwm\n");
+		goto err_clk_tdiv;
+	}
+
+	pwm_dbg(pwm, "config bits %02x\n",
+		(__raw_readl(S3C2410_TCON) >> pwm->tcon_base) & 0x0f);
+
+	dev_info(dev, "tin at %lu, tdiv at %lu, tin=%sclk, base %d\n",
+		 clk_get_rate(pwm->clk),
+		 clk_get_rate(pwm->clk_div),
+		 pwm_is_tdiv(pwm) ? "div" : "ext", pwm->tcon_base);
+
+	platform_set_drvdata(pdev, pwm);
+	return 0;
+
+ err_clk_tdiv:
+	clk_put(pwm->clk_div);
+
+ err_clk_tin:
+	clk_put(pwm->clk);
+
+ err_alloc:
+	kfree(pwm);
+	return ret;
+}
+
+static int s3c_pwm_remove(struct platform_device *pdev)
+{
+	struct pwm_device *pwm = platform_get_drvdata(pdev);
+
+	clk_put(pwm->clk_div);
+	clk_put(pwm->clk);
+	kfree(pwm);
+
+	return 0;
+}
+
+static struct platform_driver s3c_pwm_driver = {
+	.driver		= {
+		.name	= "s3c24xx-pwm",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= s3c_pwm_probe,
+	.remove		= __devexit_p(s3c_pwm_remove),
+};
+
+static int __init pwm_init(void)
+{
+	int ret;
+
+	clk_scaler[0] = clk_get(NULL, "pwm-scaler0");
+	clk_scaler[1] = clk_get(NULL, "pwm-scaler1");
+
+	if (IS_ERR(clk_scaler[0]) || IS_ERR(clk_scaler[1])) {
+		printk(KERN_ERR "%s: failed to get scaler clocks\n", __func__);
+		return -EINVAL;
+	}
+
+	ret = platform_driver_register(&s3c_pwm_driver);
+	if (ret)
+		printk(KERN_ERR "%s: failed to add pwm driver\n", __func__);
+
+	return ret;
+}
+
+arch_initcall(pwm_init);
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index 579a165c282..0807831c992 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -29,7 +29,6 @@ obj-$(CONFIG_PM_SIMTEC)		+= pm-simtec.o
 obj-$(CONFIG_PM)		+= pm.o
 obj-$(CONFIG_PM)		+= irq-pm.o
 obj-$(CONFIG_PM)		+= sleep.o
-obj-$(CONFIG_S3C24XX_PWM)	+= pwm.o
 obj-$(CONFIG_S3C2410_CLOCK)	+= s3c2410-clock.o
 obj-$(CONFIG_S3C2410_DMA)	+= dma.o
 obj-$(CONFIG_S3C24XX_ADC)	+= adc.o
diff --git a/arch/arm/plat-s3c24xx/pwm.c b/arch/arm/plat-s3c24xx/pwm.c
deleted file mode 100644
index 0120b760315..00000000000
--- a/arch/arm/plat-s3c24xx/pwm.c
+++ /dev/null
@@ -1,405 +0,0 @@
-/* arch/arm/plat-s3c24xx/pwm.c
- *
- * Copyright (c) 2007 Ben Dooks
- * Copyright (c) 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>, <ben-linux@fluff.org>
- *
- * S3C24XX PWM device core
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License.
-*/
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/pwm.h>
-
-#include <mach/irqs.h>
-
-#include <plat/devs.h>
-#include <plat/regs-timer.h>
-
-struct pwm_device {
-	struct list_head	 list;
-	struct platform_device	*pdev;
-
-	struct clk		*clk_div;
-	struct clk		*clk;
-	const char		*label;
-
-	unsigned int		 period_ns;
-	unsigned int		 duty_ns;
-
-	unsigned char		 tcon_base;
-	unsigned char		 running;
-	unsigned char		 use_count;
-	unsigned char		 pwm_id;
-};
-
-#define pwm_dbg(_pwm, msg...) dev_dbg(&(_pwm)->pdev->dev, msg)
-
-static struct clk *clk_scaler[2];
-
-/* Standard setup for a timer block. */
-
-#define TIMER_RESOURCE_SIZE (1)
-
-#define TIMER_RESOURCE(_tmr, _irq)			\
-	(struct resource [TIMER_RESOURCE_SIZE]) {	\
-		[0] = {					\
-			.start	= _irq,			\
-			.end	= _irq,			\
-			.flags	= IORESOURCE_IRQ	\
-		}					\
-	}
-
-#define DEFINE_S3C_TIMER(_tmr_no, _irq)			\
-	.name		= "s3c24xx-pwm",		\
-	.id		= _tmr_no,			\
-	.num_resources	= TIMER_RESOURCE_SIZE,		\
-	.resource	= TIMER_RESOURCE(_tmr_no, _irq),	\
-
-/* since we already have an static mapping for the timer, we do not
- * bother setting any IO resource for the base.
- */
-
-struct platform_device s3c_device_timer[] = {
-	[0] = { DEFINE_S3C_TIMER(0, IRQ_TIMER0) },
-	[1] = { DEFINE_S3C_TIMER(1, IRQ_TIMER1) },
-	[2] = { DEFINE_S3C_TIMER(2, IRQ_TIMER2) },
-	[3] = { DEFINE_S3C_TIMER(3, IRQ_TIMER3) },
-	[4] = { DEFINE_S3C_TIMER(4, IRQ_TIMER4) },
-};
-
-static inline int pwm_is_tdiv(struct pwm_device *pwm)
-{
-	return clk_get_parent(pwm->clk) == pwm->clk_div;
-}
-
-static DEFINE_MUTEX(pwm_lock);
-static LIST_HEAD(pwm_list);
-
-struct pwm_device *pwm_request(int pwm_id, const char *label)
-{
-	struct pwm_device *pwm;
-	int found = 0;
-
-	mutex_lock(&pwm_lock);
-
-	list_for_each_entry(pwm, &pwm_list, list) {
-		if (pwm->pwm_id == pwm_id) {
-			found = 1;
-			break;
-		}
-	}
-
-	if (found) {
-		if (pwm->use_count == 0) {
-			pwm->use_count = 1;
-			pwm->label = label;
-		} else
-			pwm = ERR_PTR(-EBUSY);
-	} else
-		pwm = ERR_PTR(-ENOENT);
-
-	mutex_unlock(&pwm_lock);
-	return pwm;
-}
-
-EXPORT_SYMBOL(pwm_request);
-
-
-void pwm_free(struct pwm_device *pwm)
-{
-	mutex_lock(&pwm_lock);
-
-	if (pwm->use_count) {
-		pwm->use_count--;
-		pwm->label = NULL;
-	} else
-		printk(KERN_ERR "PWM%d device already freed\n", pwm->pwm_id);
-
-	mutex_unlock(&pwm_lock);
-}
-
-EXPORT_SYMBOL(pwm_free);
-
-#define pwm_tcon_start(pwm) (1 << (pwm->tcon_base + 0))
-#define pwm_tcon_invert(pwm) (1 << (pwm->tcon_base + 2))
-#define pwm_tcon_autoreload(pwm) (1 << (pwm->tcon_base + 3))
-#define pwm_tcon_manulupdate(pwm) (1 << (pwm->tcon_base + 1))
-
-int pwm_enable(struct pwm_device *pwm)
-{
-	unsigned long flags;
-	unsigned long tcon;
-
-	local_irq_save(flags);
-
-	tcon = __raw_readl(S3C2410_TCON);
-	tcon |= pwm_tcon_start(pwm);
-	__raw_writel(tcon, S3C2410_TCON);
-
-	local_irq_restore(flags);
-
-	pwm->running = 1;
-	return 0;
-}
-
-EXPORT_SYMBOL(pwm_enable);
-
-void pwm_disable(struct pwm_device *pwm)
-{
-	unsigned long flags;
-	unsigned long tcon;
-
-	local_irq_save(flags);
-
-	tcon = __raw_readl(S3C2410_TCON);
-	tcon &= ~pwm_tcon_start(pwm);
-	__raw_writel(tcon, S3C2410_TCON);
-
-	local_irq_restore(flags);
-
-	pwm->running = 0;
-}
-
-EXPORT_SYMBOL(pwm_disable);
-
-static unsigned long pwm_calc_tin(struct pwm_device *pwm, unsigned long freq)
-{
-	unsigned long tin_parent_rate;
-	unsigned int div;
-
-	tin_parent_rate = clk_get_rate(clk_get_parent(pwm->clk_div));
-	pwm_dbg(pwm, "tin parent at %lu\n", tin_parent_rate);
-
-	for (div = 2; div <= 16; div *= 2) {
-		if ((tin_parent_rate / (div << 16)) < freq)
-			return tin_parent_rate / div;
-	}
-
-	return tin_parent_rate / 16;
-}
-
-#define NS_IN_HZ (1000000000UL)
-
-int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
-{
-	unsigned long tin_rate;
-	unsigned long tin_ns;
-	unsigned long period;
-	unsigned long flags;
-	unsigned long tcon;
-	unsigned long tcnt;
-	long tcmp;
-
-	/* We currently avoid using 64bit arithmetic by using the
-	 * fact that anything faster than 1Hz is easily representable
-	 * by 32bits. */
-
-	if (period_ns > NS_IN_HZ || duty_ns > NS_IN_HZ)
-		return -ERANGE;
-
-	if (duty_ns > period_ns)
-		return -EINVAL;
-
-	if (period_ns == pwm->period_ns &&
-	    duty_ns == pwm->duty_ns)
-		return 0;
-
-	/* The TCMP and TCNT can be read without a lock, they're not
-	 * shared between the timers. */
-
-	tcmp = __raw_readl(S3C2410_TCMPB(pwm->pwm_id));
-	tcnt = __raw_readl(S3C2410_TCNTB(pwm->pwm_id));
-
-	period = NS_IN_HZ / period_ns;
-
-	pwm_dbg(pwm, "duty_ns=%d, period_ns=%d (%lu)\n",
-		duty_ns, period_ns, period);
-
-	/* Check to see if we are changing the clock rate of the PWM */
-
-	if (pwm->period_ns != period_ns) {
-		if (pwm_is_tdiv(pwm)) {
-			tin_rate = pwm_calc_tin(pwm, period);
-			clk_set_rate(pwm->clk_div, tin_rate);
-		} else
-			tin_rate = clk_get_rate(pwm->clk);
-
-		pwm->period_ns = period_ns;
-
-		pwm_dbg(pwm, "tin_rate=%lu\n", tin_rate);
-
-		tin_ns = NS_IN_HZ / tin_rate;
-		tcnt = period_ns / tin_ns;
-	} else
-		tin_ns = NS_IN_HZ / clk_get_rate(pwm->clk);
-
-	/* Note, counters count down */
-
-	tcmp = duty_ns / tin_ns;
-	tcmp = tcnt - tcmp;
-
-	pwm_dbg(pwm, "tin_ns=%lu, tcmp=%ld/%lu\n", tin_ns, tcmp, tcnt);
-
-	if (tcmp < 0)
-		tcmp = 0;
-
-	/* Update the PWM register block. */
-
-	local_irq_save(flags);
-
-	__raw_writel(tcmp, S3C2410_TCMPB(pwm->pwm_id));
-	__raw_writel(tcnt, S3C2410_TCNTB(pwm->pwm_id));
-
-	tcon = __raw_readl(S3C2410_TCON);
-	tcon |= pwm_tcon_manulupdate(pwm);
-	tcon |= pwm_tcon_autoreload(pwm);
-	__raw_writel(tcon, S3C2410_TCON);
-
-	tcon &= ~pwm_tcon_manulupdate(pwm);
-	__raw_writel(tcon, S3C2410_TCON);
-
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-EXPORT_SYMBOL(pwm_config);
-
-static int pwm_register(struct pwm_device *pwm)
-{
-	pwm->duty_ns = -1;
-	pwm->period_ns = -1;
-
-	mutex_lock(&pwm_lock);
-	list_add_tail(&pwm->list, &pwm_list);
-	mutex_unlock(&pwm_lock);
-
-	return 0;
-}
-
-static int s3c_pwm_probe(struct platform_device *pdev)
-{
-	struct device *dev = &pdev->dev;
-	struct pwm_device *pwm;
-	unsigned long flags;
-	unsigned long tcon;
-	unsigned int id = pdev->id;
-	int ret;
-
-	if (id == 4) {
-		dev_err(dev, "TIMER4 is currently not supported\n");
-		return -ENXIO;
-	}
-
-	pwm = kzalloc(sizeof(struct pwm_device), GFP_KERNEL);
-	if (pwm == NULL) {
-		dev_err(dev, "failed to allocate pwm_device\n");
-		return -ENOMEM;
-	}
-
-	pwm->pdev = pdev;
-	pwm->pwm_id = id;
-
-	/* calculate base of control bits in TCON */
-	pwm->tcon_base = id == 0 ? 0 : (id * 4) + 4;
-
-	pwm->clk = clk_get(dev, "pwm-tin");
-	if (IS_ERR(pwm->clk)) {
-		dev_err(dev, "failed to get pwm tin clk\n");
-		ret = PTR_ERR(pwm->clk);
-		goto err_alloc;
-	}
-
-	pwm->clk_div = clk_get(dev, "pwm-tdiv");
-	if (IS_ERR(pwm->clk_div)) {
-		dev_err(dev, "failed to get pwm tdiv clk\n");
-		ret = PTR_ERR(pwm->clk_div);
-		goto err_clk_tin;
-	}
-
-	local_irq_save(flags);
-
-	tcon = __raw_readl(S3C2410_TCON);
-	tcon |= pwm_tcon_invert(pwm);
-	__raw_writel(tcon, S3C2410_TCON);
-
-	local_irq_restore(flags);
-
-
-	ret = pwm_register(pwm);
-	if (ret) {
-		dev_err(dev, "failed to register pwm\n");
-		goto err_clk_tdiv;
-	}
-
-	pwm_dbg(pwm, "config bits %02x\n",
-		(__raw_readl(S3C2410_TCON) >> pwm->tcon_base) & 0x0f);
-
-	dev_info(dev, "tin at %lu, tdiv at %lu, tin=%sclk, base %d\n",
-		 clk_get_rate(pwm->clk),
-		 clk_get_rate(pwm->clk_div),
-		 pwm_is_tdiv(pwm) ? "div" : "ext", pwm->tcon_base);
-
-	platform_set_drvdata(pdev, pwm);
-	return 0;
-
- err_clk_tdiv:
-	clk_put(pwm->clk_div);
-
- err_clk_tin:
-	clk_put(pwm->clk);
-
- err_alloc:
-	kfree(pwm);
-	return ret;
-}
-
-static int s3c_pwm_remove(struct platform_device *pdev)
-{
-	struct pwm_device *pwm = platform_get_drvdata(pdev);
-
-	clk_put(pwm->clk_div);
-	clk_put(pwm->clk);
-	kfree(pwm);
-
-	return 0;
-}
-
-static struct platform_driver s3c_pwm_driver = {
-	.driver		= {
-		.name	= "s3c24xx-pwm",
-		.owner	= THIS_MODULE,
-	},
-	.probe		= s3c_pwm_probe,
-	.remove		= __devexit_p(s3c_pwm_remove),
-};
-
-static int __init pwm_init(void)
-{
-	int ret;
-
-	clk_scaler[0] = clk_get(NULL, "pwm-scaler0");
-	clk_scaler[1] = clk_get(NULL, "pwm-scaler1");
-
-	if (IS_ERR(clk_scaler[0]) || IS_ERR(clk_scaler[1])) {
-		printk(KERN_ERR "%s: failed to get scaler clocks\n", __func__);
-		return -EINVAL;
-	}
-
-	ret = platform_driver_register(&s3c_pwm_driver);
-	if (ret)
-		printk(KERN_ERR "%s: failed to add pwm driver\n", __func__);
-
-	return ret;
-}
-
-arch_initcall(pwm_init);
-- 
cgit v1.2.3


From 897bd6a363770ced6b78f6ae8882325c7590ed8b Mon Sep 17 00:00:00 2001
From: wanzongshun <mcuos.com@gmail.com>
Date: Fri, 31 Jul 2009 02:29:45 +0100
Subject: ARM: 5633/1: Add wdt resource for w90p910 platform

Add wdt resource for w90p910 platform.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-w90x900/mach-w90p910evb.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-w90x900/mach-w90p910evb.c b/arch/arm/mach-w90x900/mach-w90p910evb.c
index 3e3a267b2dd..117578aed68 100644
--- a/arch/arm/mach-w90x900/mach-w90p910evb.c
+++ b/arch/arm/mach-w90x900/mach-w90p910evb.c
@@ -340,6 +340,28 @@ static struct spi_board_info w90p910_spi_board_info[] __initdata = {
 	},
 };
 
+/* WDT Device */
+
+static struct resource w90p910_wdt_resource[] = {
+	[0] = {
+		.start = W90X900_PA_TIMER,
+		.end   = W90X900_PA_TIMER + W90X900_SZ_TIMER - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_WDT,
+		.end   = IRQ_WDT,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device w90p910_device_wdt = {
+	.name		= "w90p910-wdt",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(w90p910_wdt_resource),
+	.resource	= w90p910_wdt_resource,
+};
+
 static struct map_desc w90p910_iodesc[] __initdata = {
 };
 
@@ -357,6 +379,7 @@ static struct platform_device *w90p910evb_dev[] __initdata = {
 	&w90p910_device_fmi,
 	&w90p910_device_emc,
 	&w90p910_device_spi,
+	&w90p910_device_wdt,
 };
 
 static void __init w90p910evb_map_io(void)
-- 
cgit v1.2.3


From ae45b1c618d9e645a5e1decff31b710f739745fa Mon Sep 17 00:00:00 2001
From: wanzongshun <mcuos.com@gmail.com>
Date: Fri, 31 Jul 2009 02:30:32 +0100
Subject: ARM: 5634/1: Add static setting cpu frequence for w90p910 platform

Add static setting cpu frequence for w90p910 platform.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-w90x900/Makefile                  |  2 +-
 arch/arm/mach-w90x900/clksel.c                  | 91 +++++++++++++++++++++++++
 arch/arm/mach-w90x900/cpu.h                     |  1 +
 arch/arm/mach-w90x900/include/mach/regs-clock.h | 22 ++++++
 arch/arm/mach-w90x900/include/mach/regs-ebi.h   | 33 +++++++++
 arch/arm/mach-w90x900/w90p910.c                 | 80 ++++++++++++++++++++++
 6 files changed, 228 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/mach-w90x900/clksel.c
 create mode 100644 arch/arm/mach-w90x900/include/mach/regs-ebi.h

(limited to 'arch')

diff --git a/arch/arm/mach-w90x900/Makefile b/arch/arm/mach-w90x900/Makefile
index d50c94f4dbd..3ccd625455c 100644
--- a/arch/arm/mach-w90x900/Makefile
+++ b/arch/arm/mach-w90x900/Makefile
@@ -5,7 +5,7 @@
 # Object file lists.
 
 obj-y				:= irq.o time.o mfp-w90p910.o gpio.o clock.o
-
+obj-y				+= clksel.o
 # W90X900 CPU support files
 
 obj-$(CONFIG_CPU_W90P910)	+= w90p910.o
diff --git a/arch/arm/mach-w90x900/clksel.c b/arch/arm/mach-w90x900/clksel.c
new file mode 100644
index 00000000000..5a77eb91cb1
--- /dev/null
+++ b/arch/arm/mach-w90x900/clksel.c
@@ -0,0 +1,91 @@
+/*
+ * linux/arch/arm/mach-w90x900/clksel.c
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/clk.h>
+#include <linux/mutex.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-clock.h>
+
+#define PLL0		0x00
+#define PLL1		0x01
+#define OTHER		0x02
+#define EXT		0x03
+#define MSOFFSET	0x0C
+#define ATAOFFSET	0x0a
+#define LCDOFFSET	0x06
+#define AUDOFFSET	0x04
+#define CPUOFFSET	0x00
+
+static DEFINE_MUTEX(clksel_sem);
+
+static void clock_source_select(const char *dev_id, unsigned int clkval)
+{
+	unsigned int clksel, offset;
+
+	clksel = __raw_readl(REG_CLKSEL);
+
+	if (strcmp(dev_id, "w90p910-ms") == 0)
+		offset = MSOFFSET;
+	else if (strcmp(dev_id, "w90p910-atapi") == 0)
+		offset = ATAOFFSET;
+	else if (strcmp(dev_id, "w90p910-lcd") == 0)
+		offset = LCDOFFSET;
+	else if (strcmp(dev_id, "w90p910-audio") == 0)
+		offset = AUDOFFSET;
+	else
+		offset = CPUOFFSET;
+
+	clksel &= ~(0x03 << offset);
+	clksel |= (clkval << offset);
+
+	__raw_writel(clksel, REG_CLKSEL);
+}
+
+void w90p910_clock_source(struct device *dev, unsigned char *src)
+{
+	unsigned int clkval;
+	const char *dev_id;
+
+	BUG_ON(!src);
+	clkval = 0;
+
+	mutex_lock(&clksel_sem);
+
+	if (dev)
+		dev_id = dev_name(dev);
+	else
+		dev_id = "cpufreq";
+
+	if (strcmp(src, "pll0") == 0)
+		clkval = PLL0;
+	else if (strcmp(src, "pll1") == 0)
+		clkval = PLL1;
+	else if (strcmp(src, "ext") == 0)
+		clkval = EXT;
+	else if (strcmp(src, "oth") == 0)
+		clkval = OTHER;
+
+	clock_source_select(dev_id, clkval);
+
+	mutex_unlock(&clksel_sem);
+}
+EXPORT_SYMBOL(w90p910_clock_source);
+
diff --git a/arch/arm/mach-w90x900/cpu.h b/arch/arm/mach-w90x900/cpu.h
index 57b5dbabeb4..ddde959d898 100644
--- a/arch/arm/mach-w90x900/cpu.h
+++ b/arch/arm/mach-w90x900/cpu.h
@@ -45,6 +45,7 @@ extern void w90p910_init_clocks(void);
 extern void w90p910_map_io(struct map_desc *mach_desc, int size);
 extern struct platform_device w90p910_serial_device;
 extern struct sys_timer w90x900_timer;
+extern void w90p910_clock_source(struct device *dev, unsigned char *src);
 
 #define W90X900_8250PORT(name)					\
 {								\
diff --git a/arch/arm/mach-w90x900/include/mach/regs-clock.h b/arch/arm/mach-w90x900/include/mach/regs-clock.h
index f10b6a8dc06..516d6b477b6 100644
--- a/arch/arm/mach-w90x900/include/mach/regs-clock.h
+++ b/arch/arm/mach-w90x900/include/mach/regs-clock.h
@@ -28,4 +28,26 @@
 #define REG_CLKEN1	(CLK_BA + 0x24)
 #define REG_CLKDIV1	(CLK_BA + 0x28)
 
+/* Define PLL freq setting */
+#define PLL_DISABLE		0x12B63
+#define	PLL_66MHZ		0x2B63
+#define	PLL_100MHZ		0x4F64
+#define PLL_120MHZ		0x4F63
+#define	PLL_166MHZ		0x4124
+#define	PLL_200MHZ		0x4F24
+
+/* Define AHB:CPUFREQ ratio */
+#define	AHB_CPUCLK_1_1		0x00
+#define	AHB_CPUCLK_1_2		0x01
+#define	AHB_CPUCLK_1_4		0x02
+#define	AHB_CPUCLK_1_8		0x03
+
+/* Define APB:AHB ratio */
+#define APB_AHB_1_2		0x01
+#define APB_AHB_1_4		0x02
+#define APB_AHB_1_8		0x03
+
+/* Define clock skew */
+#define DEFAULTSKEW		0x48
+
 #endif /*  __ASM_ARCH_REGS_CLOCK_H */
diff --git a/arch/arm/mach-w90x900/include/mach/regs-ebi.h b/arch/arm/mach-w90x900/include/mach/regs-ebi.h
new file mode 100644
index 00000000000..b68455e7f88
--- /dev/null
+++ b/arch/arm/mach-w90x900/include/mach/regs-ebi.h
@@ -0,0 +1,33 @@
+/*
+ * arch/arm/mach-w90x900/include/mach/regs-ebi.h
+ *
+ * Copyright (c) 2009 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#ifndef __ASM_ARCH_REGS_EBI_H
+#define __ASM_ARCH_REGS_EBI_H
+
+/* EBI Control Registers */
+
+#define EBI_BA		W90X900_VA_EBI
+#define REG_EBICON	(EBI_BA + 0x00)
+#define REG_ROMCON	(EBI_BA + 0x04)
+#define REG_SDCONF0	(EBI_BA + 0x08)
+#define REG_SDCONF1	(EBI_BA + 0x0C)
+#define REG_SDTIME0	(EBI_BA + 0x10)
+#define REG_SDTIME1	(EBI_BA + 0x14)
+#define REG_EXT0CON	(EBI_BA + 0x18)
+#define REG_EXT1CON	(EBI_BA + 0x1C)
+#define REG_EXT2CON	(EBI_BA + 0x20)
+#define REG_EXT3CON	(EBI_BA + 0x24)
+#define REG_EXT4CON	(EBI_BA + 0x28)
+#define REG_CKSKEW	(EBI_BA + 0x2C)
+
+#endif /*  __ASM_ARCH_REGS_EBI_H */
diff --git a/arch/arm/mach-w90x900/w90p910.c b/arch/arm/mach-w90x900/w90p910.c
index 6ebf5cfc78d..8444eababaa 100644
--- a/arch/arm/mach-w90x900/w90p910.c
+++ b/arch/arm/mach-w90x900/w90p910.c
@@ -24,6 +24,7 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/serial_8250.h>
+#include <linux/delay.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -32,6 +33,8 @@
 
 #include <mach/hardware.h>
 #include <mach/regs-serial.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-ebi.h>
 
 #include "cpu.h"
 #include "clock.h"
@@ -123,6 +126,83 @@ void __init w90p910_map_io(struct map_desc *mach_desc, int mach_size)
 		printk(KERN_ERR "CPU type 0x%08lx is not W90P910\n", idcode);
 }
 
+/*Set W90P910 cpu frequence*/
+static int __init w90p910_set_clkval(unsigned int cpufreq)
+{
+	unsigned int pllclk, ahbclk, apbclk, val;
+
+	pllclk = 0;
+	ahbclk = 0;
+	apbclk = 0;
+
+	switch (cpufreq) {
+	case 66:
+		pllclk = PLL_66MHZ;
+		ahbclk = AHB_CPUCLK_1_1;
+		apbclk = APB_AHB_1_2;
+		break;
+
+	case 100:
+		pllclk = PLL_100MHZ;
+		ahbclk = AHB_CPUCLK_1_1;
+		apbclk = APB_AHB_1_2;
+		break;
+
+	case 120:
+		pllclk = PLL_120MHZ;
+		ahbclk = AHB_CPUCLK_1_2;
+		apbclk = APB_AHB_1_2;
+		break;
+
+	case 166:
+		pllclk = PLL_166MHZ;
+		ahbclk = AHB_CPUCLK_1_2;
+		apbclk = APB_AHB_1_2;
+		break;
+
+	case 200:
+		pllclk = PLL_200MHZ;
+		ahbclk = AHB_CPUCLK_1_2;
+		apbclk = APB_AHB_1_2;
+		break;
+	}
+
+	__raw_writel(pllclk, REG_PLLCON0);
+
+	val = __raw_readl(REG_CLKDIV);
+	val &= ~(0x03 << 24 | 0x03 << 26);
+	val |= (ahbclk << 24 | apbclk << 26);
+	__raw_writel(val, REG_CLKDIV);
+
+	return 	0;
+}
+static int __init w90p910_set_cpufreq(char *str)
+{
+	unsigned long cpufreq, val;
+
+	if (!*str)
+		return 0;
+
+	strict_strtoul(str, 0, &cpufreq);
+
+	w90p910_clock_source(NULL, "ext");
+
+	w90p910_set_clkval(cpufreq);
+
+	mdelay(1);
+
+	val = __raw_readl(REG_CKSKEW);
+	val &= ~0xff;
+	val |= DEFAULTSKEW;
+	__raw_writel(val, REG_CKSKEW);
+
+	w90p910_clock_source(NULL, "pll0");
+
+	return 1;
+}
+
+__setup("cpufreq=", w90p910_set_cpufreq);
+
 /*Init W90P910 clock*/
 
 void __init w90p910_init_clocks(void)
-- 
cgit v1.2.3


From fb85205ada3fef98122a40b700ecb71efb33ae71 Mon Sep 17 00:00:00 2001
From: Sergey Matyukevich <geomatsi@gmail.com>
Date: Thu, 30 Jul 2009 22:23:24 +0100
Subject: ARM: 5631/1: Platform data for CF/IDE support in AT91SAM9260

This patch adds platform data for CF/IDE support
and SMC init code for AT91SAM9260 SoC.

Tested-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/at91sam9260_devices.c | 116 +++++++++++++++++++++++++++++++
 1 file changed, 116 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index d74c9ac007e..ee4ea0e720c 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -1113,6 +1113,122 @@ void __init at91_set_serial_console(unsigned portnr) {}
 void __init at91_add_device_serial(void) {}
 #endif
 
+/* --------------------------------------------------------------------
+ *  CF/IDE
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE) || \
+	defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE) || \
+	defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE)
+
+static struct at91_cf_data cf0_data;
+
+static struct resource cf0_resources[] = {
+	[0] = {
+		.start	= AT91_CHIPSELECT_4,
+		.end	= AT91_CHIPSELECT_4 + SZ_256M - 1,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device cf0_device = {
+	.id		= 0,
+	.dev		= {
+				.platform_data	= &cf0_data,
+	},
+	.resource	= cf0_resources,
+	.num_resources	= ARRAY_SIZE(cf0_resources),
+};
+
+static struct at91_cf_data cf1_data;
+
+static struct resource cf1_resources[] = {
+	[0] = {
+		.start	= AT91_CHIPSELECT_5,
+		.end	= AT91_CHIPSELECT_5 + SZ_256M - 1,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device cf1_device = {
+	.id		= 1,
+	.dev		= {
+				.platform_data	= &cf1_data,
+	},
+	.resource	= cf1_resources,
+	.num_resources	= ARRAY_SIZE(cf1_resources),
+};
+
+void __init at91_add_device_cf(struct at91_cf_data *data)
+{
+	struct platform_device *pdev;
+	unsigned long csa;
+
+	if (!data)
+		return;
+
+	csa = at91_sys_read(AT91_MATRIX_EBICSA);
+
+	switch (data->chipselect) {
+	case 4:
+		at91_set_multi_drive(AT91_PIN_PC8, 0);
+		at91_set_A_periph(AT91_PIN_PC8, 0);
+		csa |= AT91_MATRIX_CS4A_SMC_CF1;
+		cf0_data = *data;
+		pdev = &cf0_device;
+		break;
+	case 5:
+		at91_set_multi_drive(AT91_PIN_PC9, 0);
+		at91_set_A_periph(AT91_PIN_PC9, 0);
+		csa |= AT91_MATRIX_CS5A_SMC_CF2;
+		cf1_data = *data;
+		pdev = &cf1_device;
+		break;
+	default:
+		printk(KERN_ERR "AT91 CF: bad chip-select requested (%u)\n",
+		       data->chipselect);
+		return;
+	}
+
+	at91_sys_write(AT91_MATRIX_EBICSA, csa);
+
+	if (data->rst_pin) {
+		at91_set_multi_drive(data->rst_pin, 0);
+		at91_set_gpio_output(data->rst_pin, 1);
+	}
+
+	if (data->irq_pin) {
+		at91_set_gpio_input(data->irq_pin, 0);
+		at91_set_deglitch(data->irq_pin, 1);
+	}
+
+	if (data->det_pin) {
+		at91_set_gpio_input(data->det_pin, 0);
+		at91_set_deglitch(data->det_pin, 1);
+	}
+
+	at91_set_B_periph(AT91_PIN_PC6, 0);     /* CFCE1 */
+	at91_set_B_periph(AT91_PIN_PC7, 0);     /* CFCE2 */
+	at91_set_A_periph(AT91_PIN_PC10, 0);    /* CFRNW */
+	at91_set_A_periph(AT91_PIN_PC15, 1);    /* NWAIT */
+
+	if (data->flags & AT91_CF_TRUE_IDE)
+#if defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE)
+		pdev->name = "pata_at91";
+#elif defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE)
+		pdev->name = "at91_ide";
+#else
+#warning "board requires AT91_CF_TRUE_IDE: enable either at91_ide or pata_at91"
+#endif
+	else
+		pdev->name = "at91_cf";
+
+	platform_device_register(pdev);
+}
+
+#else
+void __init at91_add_device_cf(struct at91_cf_data * data) {}
+#endif
 
 /* -------------------------------------------------------------------- */
 /*
-- 
cgit v1.2.3


From 0c30df6fe0bd1e3845357e793dc1bfd908751c45 Mon Sep 17 00:00:00 2001
From: Sergey Matyukevich <geomatsi@gmail.com>
Date: Thu, 30 Jul 2009 22:29:07 +0100
Subject: ARM: 5632/1: Board-specific data for IDE support on afeb9260

This patch adds board-specific data for IDE support on afeb9260.

Depends on #5631/1

Tested-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Acked-by: Sergey Lapin <slapin@ossfans.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/board-afeb-9260v1.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c
index 970fd6b6753..61e52b66bc7 100644
--- a/arch/arm/mach-at91/board-afeb-9260v1.c
+++ b/arch/arm/mach-at91/board-afeb-9260v1.c
@@ -174,6 +174,16 @@ static struct i2c_board_info __initdata afeb9260_i2c_devices[] = {
 	},
 };
 
+/*
+ * IDE (CF True IDE mode)
+ */
+static struct at91_cf_data afeb9260_cf_data = {
+	.chipselect = 4,
+	.irq_pin    = AT91_PIN_PA6,
+	.rst_pin    = AT91_PIN_PA7,
+	.flags      = AT91_CF_TRUE_IDE,
+};
+
 static void __init afeb9260_board_init(void)
 {
 	/* Serial */
@@ -202,6 +212,8 @@ static void __init afeb9260_board_init(void)
 			ARRAY_SIZE(afeb9260_i2c_devices));
 	/* Audio */
 	at91_add_device_ssc(AT91SAM9260_ID_SSC, ATMEL_SSC_TX);
+	/* IDE */
+	at91_add_device_cf(&afeb9260_cf_data);
 }
 
 MACHINE_START(AFEB9260, "Custom afeb9260 board")
-- 
cgit v1.2.3


From a084fcfae541abc0eeecdd73ceeb01fb2453df4e Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Sat, 1 Aug 2009 16:26:03 +0100
Subject: [ARM] Update mach-types

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/tools/mach-types | 38 +++++++++++++++++++++++++++++++++++++-
 1 file changed, 37 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index 30af4329469..200d83a9828 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -12,7 +12,7 @@
 #
 #   http://www.arm.linux.org.uk/developer/machines/?action=new
 #
-# Last update: Thu Jul 9 20:56:13 2009
+# Last update: Sat Aug 1 16:26:02 2009
 #
 # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
 #
@@ -2313,3 +2313,39 @@ openrd_base		MACH_OPENRD_BASE	OPENRD_BASE		2325
 incredible		MACH_INCREDIBLE		INCREDIBLE		2326
 incrediblec		MACH_INCREDIBLEC	INCREDIBLEC		2327
 heroct			MACH_HEROCT		HEROCT			2328
+mmnet1000		MACH_MMNET1000		MMNET1000		2329
+devkit8000		MACH_DEVKIT8000		DEVKIT8000		2330
+devkit9000		MACH_DEVKIT9000		DEVKIT9000		2331
+mx31txtr		MACH_MX31TXTR		MX31TXTR		2332
+u380			MACH_U380		U380			2333
+oamp3_hualu		MACH_HUALU_BOARD	HUALU_BOARD		2334
+npcmx50			MACH_NPCMX50		NPCMX50			2335
+mx51_lange51		MACH_MX51_LANGE51	MX51_LANGE51		2336
+mx51_lange52		MACH_MX51_LANGE52	MX51_LANGE52		2337
+riom			MACH_RIOM		RIOM			2338
+comcas			MACH_COMCAS		COMCAS			2339
+wsi_mx27		MACH_WSI_MX27		WSI_MX27		2340
+cm_t35			MACH_CM_T35		CM_T35			2341
+net2big			MACH_NET2BIG		NET2BIG			2342
+motorola_a1600		MACH_MOTOROLA_A1600	MOTOROLA_A1600		2343
+igep0020		MACH_IGEP0020		IGEP0020		2344
+igep0010		MACH_IGEP0010		IGEP0010		2345
+mv6281gtwge2		MACH_MV6281GTWGE2	MV6281GTWGE2		2346
+scat100			MACH_SCAT100		SCAT100			2347
+sanmina			MACH_SANMINA		SANMINA			2348
+momento			MACH_MOMENTO		MOMENTO			2349
+nuc9xx			MACH_NUC9XX		NUC9XX			2350
+nuc910evb		MACH_NUC910EVB		NUC910EVB		2351
+nuc920evb		MACH_NUC920EVB		NUC920EVB		2352
+nuc950evb		MACH_NUC950EVB		NUC950EVB		2353
+nuc945evb		MACH_NUC945EVB		NUC945EVB		2354
+nuc960evb		MACH_NUC960EVB		NUC960EVB		2355
+nuc932evb		MACH_NUC932EVB		NUC932EVB		2356
+nuc900			MACH_NUC900		NUC900			2357
+sd1soc			MACH_SD1SOC		SD1SOC			2358
+ln2440bc		MACH_LN2440BC		LN2440BC		2359
+rsbc			MACH_RSBC		RSBC			2360
+openrd_client		MACH_OPENRD_CLIENT	OPENRD_CLIENT		2361
+hpipaq11x		MACH_HPIPAQ11X		HPIPAQ11X		2362
+wayland			MACH_WAYLAND		WAYLAND			2363
+acnbsx102		MACH_ACNBSX102		ACNBSX102		2364
-- 
cgit v1.2.3


From c1dc0b9c0c8979ce4d411caadff5c0d79dee58bc Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Sun, 2 Aug 2009 11:28:21 +0200
Subject: debug lockups: Improve lockup detection

When debugging a recent lockup bug i found various deficiencies
in how our current lockup detection helpers work:

 - SysRq-L is not very efficient as it uses a workqueue, hence
   it cannot punch through hard lockups and cannot see through
   most soft lockups either.

 - The SysRq-L code depends on the NMI watchdog - which is off
   by default.

 - We dont print backtraces from the RCU code's built-in
   'RCU state machine is stuck' debug code. This debug
   code tends to be one of the first (and only) mechanisms
   that show that a lockup has occured.

This patch changes the code so taht we:

 - Trigger the NMI backtrace code from SysRq-L instead of using
   a workqueue (which cannot punch through hard lockups)

 - Trigger print-all-CPU-backtraces from the RCU lockup detection
   code

Also decouple the backtrace printing code from the NMI watchdog:

 - Dont use variable size cpumasks (it might not be initialized
   and they are a bit more fragile anyway)

 - Trigger an NMI immediately via an IPI, instead of waiting
   for the NMI tick to occur. This is a lot faster and can
   produce more relevant backtraces. It will also work if the
   NMI watchdog is disabled.

 - Dont print the 'dazed and confused' message when we print
   a backtrace from the NMI

 - Do a show_regs() plus a dump_stack() to get maximum info
   out of the dump. Worst-case we get two stacktraces - which
   is not a big deal. Sometimes, if register content is
   corrupted, the precise stack walker in show_regs() wont
   give us a full backtrace - in this case dump_stack() will
   do it.

Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/apic/nmi.c | 18 ++++++++++++------
 1 file changed, 12 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/apic/nmi.c b/arch/x86/kernel/apic/nmi.c
index b3025b43b63..1bb1ac20e9e 100644
--- a/arch/x86/kernel/apic/nmi.c
+++ b/arch/x86/kernel/apic/nmi.c
@@ -39,7 +39,7 @@
 int unknown_nmi_panic;
 int nmi_watchdog_enabled;
 
-static cpumask_var_t backtrace_mask;
+static cpumask_t backtrace_mask __read_mostly;
 
 /* nmi_active:
  * >0: the lapic NMI watchdog is active, but can be disabled
@@ -138,7 +138,6 @@ int __init check_nmi_watchdog(void)
 	if (!prev_nmi_count)
 		goto error;
 
-	alloc_cpumask_var(&backtrace_mask, GFP_KERNEL|__GFP_ZERO);
 	printk(KERN_INFO "Testing NMI watchdog ... ");
 
 #ifdef CONFIG_SMP
@@ -415,14 +414,17 @@ nmi_watchdog_tick(struct pt_regs *regs, unsigned reason)
 	}
 
 	/* We can be called before check_nmi_watchdog, hence NULL check. */
-	if (backtrace_mask != NULL && cpumask_test_cpu(cpu, backtrace_mask)) {
+	if (cpumask_test_cpu(cpu, &backtrace_mask)) {
 		static DEFINE_SPINLOCK(lock);	/* Serialise the printks */
 
 		spin_lock(&lock);
 		printk(KERN_WARNING "NMI backtrace for cpu %d\n", cpu);
+		show_regs(regs);
 		dump_stack();
 		spin_unlock(&lock);
-		cpumask_clear_cpu(cpu, backtrace_mask);
+		cpumask_clear_cpu(cpu, &backtrace_mask);
+
+		rc = 1;
 	}
 
 	/* Could check oops_in_progress here too, but it's safer not to */
@@ -556,10 +558,14 @@ void __trigger_all_cpu_backtrace(void)
 {
 	int i;
 
-	cpumask_copy(backtrace_mask, cpu_online_mask);
+	cpumask_copy(&backtrace_mask, cpu_online_mask);
+
+	printk(KERN_INFO "sending NMI to all CPUs:\n");
+	apic->send_IPI_all(NMI_VECTOR);
+
 	/* Wait for up to 10 seconds for all CPUs to do the backtrace */
 	for (i = 0; i < 10 * 1000; i++) {
-		if (cpumask_empty(backtrace_mask))
+		if (cpumask_empty(&backtrace_mask))
 			break;
 		mdelay(1);
 	}
-- 
cgit v1.2.3


From 25f6e89bedd29cc49bfa0d55497e91a671b9ae6e Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Thu, 30 Jul 2009 23:21:18 +0200
Subject: x86: Remove superfluous NULL pointer check in destroy_irq()

This takes care of the following entry from Dan's list:

  arch/x86/kernel/apic/io_apic.c +3241 destroy_irq(11) warning: variable derefenced before check 'desc'

Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Eugene Teo <eteo@redhat.com>
Cc: Julia Lawall <julia@diku.dk>
LKML-Reference: <200907302321.19086.bzolnier@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/apic/io_apic.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index cf51b0b58c5..7e92a9212fd 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -3185,8 +3185,7 @@ void destroy_irq(unsigned int irq)
 	cfg = desc->chip_data;
 	dynamic_irq_cleanup(irq);
 	/* connect back irq_cfg */
-	if (desc)
-		desc->chip_data = cfg;
+	desc->chip_data = cfg;
 
 	free_irte(irq);
 	spin_lock_irqsave(&vector_lock, flags);
-- 
cgit v1.2.3


From 47cab6a722d44c71c4f8224017ef548522243cf4 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Mon, 3 Aug 2009 09:31:54 +0200
Subject: debug lockups: Improve lockup detection, fix generic arch fallback

As Andrew noted, my previous patch ("debug lockups: Improve lockup
detection") broke/removed SysRq-L support from architecture that do
not provide a __trigger_all_cpu_backtrace implementation.

Restore a fallback path and clean up the SysRq-L machinery a bit:

 - Rename the arch method to arch_trigger_all_cpu_backtrace()

 - Simplify the define

 - Document the method a bit - in the hope of more architectures
   adding support for it.

[ The patch touches Sparc code for the rename. ]

Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: "David S. Miller" <davem@davemloft.net>
LKML-Reference: <20090802140809.7ec4bb6b.akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/sparc/include/asm/irq_64.h | 4 ++--
 arch/sparc/kernel/process_64.c  | 4 ++--
 arch/x86/include/asm/nmi.h      | 4 ++--
 arch/x86/kernel/apic/nmi.c      | 2 +-
 4 files changed, 7 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/sparc/include/asm/irq_64.h b/arch/sparc/include/asm/irq_64.h
index 1934f2cbf51..a0b443cb3c1 100644
--- a/arch/sparc/include/asm/irq_64.h
+++ b/arch/sparc/include/asm/irq_64.h
@@ -89,8 +89,8 @@ static inline unsigned long get_softint(void)
 	return retval;
 }
 
-void __trigger_all_cpu_backtrace(void);
-#define trigger_all_cpu_backtrace() __trigger_all_cpu_backtrace()
+void arch_trigger_all_cpu_backtrace(void);
+#define arch_trigger_all_cpu_backtrace arch_trigger_all_cpu_backtrace
 
 extern void *hardirq_stack[NR_CPUS];
 extern void *softirq_stack[NR_CPUS];
diff --git a/arch/sparc/kernel/process_64.c b/arch/sparc/kernel/process_64.c
index 4041f94e772..18d67854a1b 100644
--- a/arch/sparc/kernel/process_64.c
+++ b/arch/sparc/kernel/process_64.c
@@ -251,7 +251,7 @@ static void __global_reg_poll(struct global_reg_snapshot *gp)
 	}
 }
 
-void __trigger_all_cpu_backtrace(void)
+void arch_trigger_all_cpu_backtrace(void)
 {
 	struct thread_info *tp = current_thread_info();
 	struct pt_regs *regs = get_irq_regs();
@@ -304,7 +304,7 @@ void __trigger_all_cpu_backtrace(void)
 
 static void sysrq_handle_globreg(int key, struct tty_struct *tty)
 {
-	__trigger_all_cpu_backtrace();
+	arch_trigger_all_cpu_backtrace();
 }
 
 static struct sysrq_key_op sparc_globalreg_op = {
diff --git a/arch/x86/include/asm/nmi.h b/arch/x86/include/asm/nmi.h
index c86e5ed4af5..e63cf7d441e 100644
--- a/arch/x86/include/asm/nmi.h
+++ b/arch/x86/include/asm/nmi.h
@@ -45,8 +45,8 @@ extern int proc_nmi_enabled(struct ctl_table *, int , struct file *,
 			void __user *, size_t *, loff_t *);
 extern int unknown_nmi_panic;
 
-void __trigger_all_cpu_backtrace(void);
-#define trigger_all_cpu_backtrace() __trigger_all_cpu_backtrace()
+void arch_trigger_all_cpu_backtrace(void);
+#define arch_trigger_all_cpu_backtrace arch_trigger_all_cpu_backtrace
 
 static inline void localise_nmi_watchdog(void)
 {
diff --git a/arch/x86/kernel/apic/nmi.c b/arch/x86/kernel/apic/nmi.c
index 1bb1ac20e9e..db7220220d0 100644
--- a/arch/x86/kernel/apic/nmi.c
+++ b/arch/x86/kernel/apic/nmi.c
@@ -554,7 +554,7 @@ int do_nmi_callback(struct pt_regs *regs, int cpu)
 	return 0;
 }
 
-void __trigger_all_cpu_backtrace(void)
+void arch_trigger_all_cpu_backtrace(void)
 {
 	int i;
 
-- 
cgit v1.2.3


From 6a12235c7d2d75c7d94b9afcaaecd422ff845ce0 Mon Sep 17 00:00:00 2001
From: David Woodhouse <David.Woodhouse@intel.com>
Date: Wed, 29 Jul 2009 10:25:58 +0100
Subject: agp: kill phys_to_gart() and gart_to_phys()

There seems to be no reason for these -- they're a 1:1 mapping on all
platforms.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 arch/alpha/include/asm/agp.h   | 4 ----
 arch/ia64/include/asm/agp.h    | 4 ----
 arch/parisc/include/asm/agp.h  | 4 ----
 arch/powerpc/include/asm/agp.h | 4 ----
 arch/sparc/include/asm/agp.h   | 4 ----
 arch/x86/include/asm/agp.h     | 4 ----
 6 files changed, 24 deletions(-)

(limited to 'arch')

diff --git a/arch/alpha/include/asm/agp.h b/arch/alpha/include/asm/agp.h
index 26c17913529..a94d48b8677 100644
--- a/arch/alpha/include/asm/agp.h
+++ b/arch/alpha/include/asm/agp.h
@@ -9,10 +9,6 @@
 #define unmap_page_from_agp(page) 
 #define flush_agp_cache() mb()
 
-/* Convert a physical address to an address suitable for the GART. */
-#define phys_to_gart(x) (x)
-#define gart_to_phys(x) (x)
-
 /* GATT allocation. Returns/accepts GATT kernel virtual address. */
 #define alloc_gatt_pages(order)		\
 	((char *)__get_free_pages(GFP_KERNEL, (order)))
diff --git a/arch/ia64/include/asm/agp.h b/arch/ia64/include/asm/agp.h
index c11fdd8ab4d..01d09c401c5 100644
--- a/arch/ia64/include/asm/agp.h
+++ b/arch/ia64/include/asm/agp.h
@@ -17,10 +17,6 @@
 #define unmap_page_from_agp(page)	/* nothing */
 #define flush_agp_cache()		mb()
 
-/* Convert a physical address to an address suitable for the GART. */
-#define phys_to_gart(x) (x)
-#define gart_to_phys(x) (x)
-
 /* GATT allocation. Returns/accepts GATT kernel virtual address. */
 #define alloc_gatt_pages(order)		\
 	((char *)__get_free_pages(GFP_KERNEL, (order)))
diff --git a/arch/parisc/include/asm/agp.h b/arch/parisc/include/asm/agp.h
index 9651660da63..d226ffa8fc1 100644
--- a/arch/parisc/include/asm/agp.h
+++ b/arch/parisc/include/asm/agp.h
@@ -11,10 +11,6 @@
 #define unmap_page_from_agp(page)	/* nothing */
 #define flush_agp_cache()		mb()
 
-/* Convert a physical address to an address suitable for the GART. */
-#define phys_to_gart(x) (x)
-#define gart_to_phys(x) (x)
-
 /* GATT allocation. Returns/accepts GATT kernel virtual address. */
 #define alloc_gatt_pages(order)		\
 	((char *)__get_free_pages(GFP_KERNEL, (order)))
diff --git a/arch/powerpc/include/asm/agp.h b/arch/powerpc/include/asm/agp.h
index 86455c4c31e..416e12c2d50 100644
--- a/arch/powerpc/include/asm/agp.h
+++ b/arch/powerpc/include/asm/agp.h
@@ -8,10 +8,6 @@
 #define unmap_page_from_agp(page)
 #define flush_agp_cache() mb()
 
-/* Convert a physical address to an address suitable for the GART. */
-#define phys_to_gart(x) (x)
-#define gart_to_phys(x) (x)
-
 /* GATT allocation. Returns/accepts GATT kernel virtual address. */
 #define alloc_gatt_pages(order)		\
 	((char *)__get_free_pages(GFP_KERNEL, (order)))
diff --git a/arch/sparc/include/asm/agp.h b/arch/sparc/include/asm/agp.h
index c2456870b05..70f52c1661b 100644
--- a/arch/sparc/include/asm/agp.h
+++ b/arch/sparc/include/asm/agp.h
@@ -7,10 +7,6 @@
 #define unmap_page_from_agp(page)
 #define flush_agp_cache() mb()
 
-/* Convert a physical address to an address suitable for the GART. */
-#define phys_to_gart(x) (x)
-#define gart_to_phys(x) (x)
-
 /* GATT allocation. Returns/accepts GATT kernel virtual address. */
 #define alloc_gatt_pages(order)		\
 	((char *)__get_free_pages(GFP_KERNEL, (order)))
diff --git a/arch/x86/include/asm/agp.h b/arch/x86/include/asm/agp.h
index 9825cd64c9b..eec2a70d437 100644
--- a/arch/x86/include/asm/agp.h
+++ b/arch/x86/include/asm/agp.h
@@ -22,10 +22,6 @@
  */
 #define flush_agp_cache() wbinvd()
 
-/* Convert a physical address to an address suitable for the GART. */
-#define phys_to_gart(x) (x)
-#define gart_to_phys(x) (x)
-
 /* GATT allocation. Returns/accepts GATT kernel virtual address. */
 #define alloc_gatt_pages(order)		\
 	((char *)__get_free_pages(GFP_KERNEL, (order)))
-- 
cgit v1.2.3


From af1057abd7d5f97e17ab96e34d1920746188ddcb Mon Sep 17 00:00:00 2001
From: Julia Lawall <julia@diku.dk>
Date: Mon, 3 Aug 2009 11:57:20 +0100
Subject: ARM: 5635/1: Use DIV_ROUND_CLOSEST

The kernel.h macro DIV_ROUND_CLOSEST performs the computation
(x + d/2)/d but is perhaps more readable.

The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@haskernel@
@@

@depends on haskernel@
expression x,__divisor;
@@

- (((x) + ((__divisor) / 2)) / (__divisor))
+ DIV_ROUND_CLOSEST(x,__divisor)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ep93xx/core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 40755298fa3..16b92c37ec9 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -82,7 +82,7 @@ void __init ep93xx_map_io(void)
  */
 static unsigned int last_jiffy_time;
 
-#define TIMER4_TICKS_PER_JIFFY		((CLOCK_TICK_RATE + (HZ/2)) / HZ)
+#define TIMER4_TICKS_PER_JIFFY		DIV_ROUND_CLOSEST(CLOCK_TICK_RATE, HZ)
 
 static irqreturn_t ep93xx_timer_interrupt(int irq, void *dev_id)
 {
-- 
cgit v1.2.3


From ed8d9adf357ec331603fa1049510399812cea7e5 Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Mon, 3 Aug 2009 14:08:48 +0900
Subject: x86, percpu: Add 'percpu_read_stable()' interface for cacheable
 accesses

This is very useful for some common things like 'get_current()' and
'get_thread_info()', which can be used multiple times in a function, and
where the result is cacheable.

tj: Added the magical undocumented "P" modifier to UP __percpu_arg()
    to force gcc to dereference the pointer value passed in via the
    "p" input constraint.  Without this, percpu_read_stable() returns
    the address of the percpu variable.  Also added comment explaining
    the difference between percpu_read() and percpu_read_stable().

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/include/asm/current.h     |  2 +-
 arch/x86/include/asm/percpu.h      | 26 +++++++++++++++++++-------
 arch/x86/include/asm/thread_info.h |  2 +-
 3 files changed, 21 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/current.h b/arch/x86/include/asm/current.h
index c68c361697e..4d447b732d8 100644
--- a/arch/x86/include/asm/current.h
+++ b/arch/x86/include/asm/current.h
@@ -11,7 +11,7 @@ DECLARE_PER_CPU(struct task_struct *, current_task);
 
 static __always_inline struct task_struct *get_current(void)
 {
-	return percpu_read(current_task);
+	return percpu_read_stable(current_task);
 }
 
 #define current get_current()
diff --git a/arch/x86/include/asm/percpu.h b/arch/x86/include/asm/percpu.h
index 103f1ddb0d8..04eacefcfd2 100644
--- a/arch/x86/include/asm/percpu.h
+++ b/arch/x86/include/asm/percpu.h
@@ -49,7 +49,7 @@
 #define __percpu_arg(x)		"%%"__stringify(__percpu_seg)":%P" #x
 #define __my_cpu_offset		percpu_read(this_cpu_off)
 #else
-#define __percpu_arg(x)		"%" #x
+#define __percpu_arg(x)		"%P" #x
 #endif
 
 /*
@@ -104,36 +104,48 @@ do {							\
 	}						\
 } while (0)
 
-#define percpu_from_op(op, var)				\
+#define percpu_from_op(op, var, constraint)		\
 ({							\
 	typeof(var) ret__;				\
 	switch (sizeof(var)) {				\
 	case 1:						\
 		asm(op "b "__percpu_arg(1)",%0"		\
 		    : "=q" (ret__)			\
-		    : "m" (var));			\
+		    : constraint);			\
 		break;					\
 	case 2:						\
 		asm(op "w "__percpu_arg(1)",%0"		\
 		    : "=r" (ret__)			\
-		    : "m" (var));			\
+		    : constraint);			\
 		break;					\
 	case 4:						\
 		asm(op "l "__percpu_arg(1)",%0"		\
 		    : "=r" (ret__)			\
-		    : "m" (var));			\
+		    : constraint);			\
 		break;					\
 	case 8:						\
 		asm(op "q "__percpu_arg(1)",%0"		\
 		    : "=r" (ret__)			\
-		    : "m" (var));			\
+		    : constraint);			\
 		break;					\
 	default: __bad_percpu_size();			\
 	}						\
 	ret__;						\
 })
 
-#define percpu_read(var)	percpu_from_op("mov", per_cpu__##var)
+/*
+ * percpu_read() makes gcc load the percpu variable every time it is
+ * accessed while percpu_read_stable() allows the value to be cached.
+ * percpu_read_stable() is more efficient and can be used if its value
+ * is guaranteed to be valid across cpus.  The current users include
+ * get_current() and get_thread_info() both of which are actually
+ * per-thread variables implemented as per-cpu variables and thus
+ * stable for the duration of the respective task.
+ */
+#define percpu_read(var)	percpu_from_op("mov", per_cpu__##var,	\
+					       "m" (per_cpu__##var))
+#define percpu_read_stable(var)	percpu_from_op("mov", per_cpu__##var,	\
+					       "p" (&per_cpu__##var))
 #define percpu_write(var, val)	percpu_to_op("mov", per_cpu__##var, val)
 #define percpu_add(var, val)	percpu_to_op("add", per_cpu__##var, val)
 #define percpu_sub(var, val)	percpu_to_op("sub", per_cpu__##var, val)
diff --git a/arch/x86/include/asm/thread_info.h b/arch/x86/include/asm/thread_info.h
index fad7d40b75f..a1bb5a114bf 100644
--- a/arch/x86/include/asm/thread_info.h
+++ b/arch/x86/include/asm/thread_info.h
@@ -213,7 +213,7 @@ DECLARE_PER_CPU(unsigned long, kernel_stack);
 static inline struct thread_info *current_thread_info(void)
 {
 	struct thread_info *ti;
-	ti = (void *)(percpu_read(kernel_stack) +
+	ti = (void *)(percpu_read_stable(kernel_stack) +
 		      KERNEL_STACK_OFFSET - THREAD_SIZE);
 	return ti;
 }
-- 
cgit v1.2.3


From 3e352aa8ee2bd48f1a19c7742810b3a4a7ba605e Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Mon, 3 Aug 2009 14:10:11 +0900
Subject: x86, percpu: Fix DECLARE/DEFINE_PER_CPU_PAGE_ALIGNED()

DECLARE/DEFINE_PER_CPU_PAGE_ALIGNED() put percpu variables in
.page_aligned section without adding any alignment restrictions.
Currently, this doesn't cause any problem because all users of the
macros have explicit page alignment and page-sized but it's much safer
to enforce page alignment from the macros.  After all, it's what they
claim to do.

Add __aligned(PAGE_SIZE) to DECLARE/DEFINE_PER_CPU_PAGE_ALIGNED() and
drop explicit alignment from it users.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/kernel/cpu/common.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index f1961c07af9..12493c5485e 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -1008,8 +1008,7 @@ static const unsigned int exception_stack_sizes[N_EXCEPTION_STACKS] = {
 };
 
 static DEFINE_PER_CPU_PAGE_ALIGNED(char, exception_stacks
-	[(N_EXCEPTION_STACKS - 1) * EXCEPTION_STKSZ + DEBUG_STKSZ])
-	__aligned(PAGE_SIZE);
+	[(N_EXCEPTION_STACKS - 1) * EXCEPTION_STKSZ + DEBUG_STKSZ]);
 
 /* May not be marked __init: used by software suspend */
 void syscall_init(void)
-- 
cgit v1.2.3


From bdf977b37418cdf8a2252504779a7e12a09b7575 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Mon, 3 Aug 2009 14:12:19 +0900
Subject: x86, percpu: Collect hot percpu variables into one cacheline

On x86_64, percpu variables current_task and kernel_stack are used for
get_current() and current_thread_info() respectively and thus are
often used close to each other.  Move definition of current_task to
kernel/cpu/common.c right above kernel_stack definition and align it
to cacheline so that they always fall into the same cacheline.  Two
percpu variables defined there together - irq_stack_ptr and irq_count
- are also pretty hot and will benefit from sharing the cacheline.

For consistency, current_task definition for x86_32 is also moved to
kernel/cpu/common.c.

Putting current_task and kernel_stack into the same cacheline was
suggested by Linus Torvalds.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/kernel/cpu/common.c | 15 +++++++++++++--
 arch/x86/kernel/process_32.c |  3 ---
 arch/x86/kernel/process_64.c |  3 ---
 3 files changed, 13 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 12493c5485e..1bd88ed978b 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -987,13 +987,21 @@ struct desc_ptr idt_descr = { 256 * 16 - 1, (unsigned long) idt_table };
 DEFINE_PER_CPU_FIRST(union irq_stack_union,
 		     irq_stack_union) __aligned(PAGE_SIZE);
 
-DEFINE_PER_CPU(char *, irq_stack_ptr) =
-	init_per_cpu_var(irq_stack_union.irq_stack) + IRQ_STACK_SIZE - 64;
+/*
+ * The following four percpu variables are hot.  Align current_task to
+ * cacheline size such that all four fall in the same cacheline.
+ */
+DEFINE_PER_CPU(struct task_struct *, current_task) ____cacheline_aligned =
+	&init_task;
+EXPORT_PER_CPU_SYMBOL(current_task);
 
 DEFINE_PER_CPU(unsigned long, kernel_stack) =
 	(unsigned long)&init_thread_union - KERNEL_STACK_OFFSET + THREAD_SIZE;
 EXPORT_PER_CPU_SYMBOL(kernel_stack);
 
+DEFINE_PER_CPU(char *, irq_stack_ptr) =
+	init_per_cpu_var(irq_stack_union.irq_stack) + IRQ_STACK_SIZE - 64;
+
 DEFINE_PER_CPU(unsigned int, irq_count) = -1;
 
 /*
@@ -1041,6 +1049,9 @@ DEFINE_PER_CPU(struct orig_ist, orig_ist);
 
 #else	/* CONFIG_X86_64 */
 
+DEFINE_PER_CPU(struct task_struct *, current_task) = &init_task;
+EXPORT_PER_CPU_SYMBOL(current_task);
+
 #ifdef CONFIG_CC_STACKPROTECTOR
 DEFINE_PER_CPU(unsigned long, stack_canary);
 #endif
diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
index 59f4524984a..daa4107be3b 100644
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -61,9 +61,6 @@
 
 asmlinkage void ret_from_fork(void) __asm__("ret_from_fork");
 
-DEFINE_PER_CPU(struct task_struct *, current_task) = &init_task;
-EXPORT_PER_CPU_SYMBOL(current_task);
-
 /*
  * Return saved PC of a blocked thread.
  */
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index ebefb5407b9..c4c675d5ba1 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -55,9 +55,6 @@
 
 asmlinkage extern void ret_from_fork(void);
 
-DEFINE_PER_CPU(struct task_struct *, current_task) = &init_task;
-EXPORT_PER_CPU_SYMBOL(current_task);
-
 DEFINE_PER_CPU(unsigned long, old_rsp);
 static DEFINE_PER_CPU(unsigned char, is_idle);
 
-- 
cgit v1.2.3


From c7bd0414d681706a32105895cae20fb9090db52e Mon Sep 17 00:00:00 2001
From: Frans Pop <elendil@planet.nl>
Date: Thu, 23 Jul 2009 20:56:27 +0200
Subject: x86: Simplify the Makefile in a minor way through use of cc-ifversion

Signed-off-by: Frans Pop <elendil@planet.nl>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: WANG Cong <xiyou.wangcong@gmail.com>
LKML-Reference: <200907232056.28635.elendil@planet.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/Makefile | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index 1b68659c41b..1f3851a626d 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -32,8 +32,8 @@ ifeq ($(CONFIG_X86_32),y)
 
         # Disable unit-at-a-time mode on pre-gcc-4.0 compilers, it makes gcc use
         # a lot more stack due to the lack of sharing of stacklots:
-        KBUILD_CFLAGS += $(shell if [ $(call cc-version) -lt 0400 ] ; then \
-                echo $(call cc-option,-fno-unit-at-a-time); fi ;)
+        KBUILD_CFLAGS += $(call cc-ifversion, -lt, 0400, \
+				$(call cc-option,-fno-unit-at-a-time))
 
         # CPU-specific tuning. Anything which can be shared with UML should go here.
         include $(srctree)/arch/x86/Makefile_32.cpu
-- 
cgit v1.2.3


From 54a0bf3c2cad3fd118ea725f26a493aece6ea01d Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Tue, 4 Aug 2009 15:52:38 +0200
Subject: Revert "x86: oprofile/op_model_amd.c set return values for
 op_amd_handle_ibs()"

This reverts commit 21e70878215f620fe99ea7d7c74bc641aeec932f.

Instead Andrew's patch will be applied he posted at the same time.

Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/op_model_amd.c | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/op_model_amd.c b/arch/x86/oprofile/op_model_amd.c
index 827beecb67a..37d19c768d5 100644
--- a/arch/x86/oprofile/op_model_amd.c
+++ b/arch/x86/oprofile/op_model_amd.c
@@ -195,7 +195,7 @@ op_amd_handle_ibs(struct pt_regs * const regs,
 	struct op_entry entry;
 
 	if (!has_ibs)
-		return 0;
+		return 1;
 
 	if (ibs_config.fetch_enabled) {
 		rdmsrl(MSR_AMD64_IBSFETCHCTL, ctl);
@@ -277,10 +277,7 @@ static void op_amd_stop_ibs(void)
 #else
 
 static inline int op_amd_handle_ibs(struct pt_regs * const regs,
-				    struct op_msrs const * const msrs)
-{
-	return 0;
-}
+				    struct op_msrs const * const msrs) { }
 static inline void op_amd_start_ibs(void) { }
 static inline void op_amd_stop_ibs(void) { }
 
-- 
cgit v1.2.3


From 4680e64a88c4ce2c4e736dade99233e3def13fa7 Mon Sep 17 00:00:00 2001
From: Andrew Morton <akpm@linux-foundation.org>
Date: Tue, 23 Jun 2009 12:36:08 -0700
Subject: arch/x86/oprofile/op_model_amd.c: fix op_amd_handle_ibs() return type

arch/x86/oprofile/op_model_amd.c: In function 'op_amd_handle_ibs':
arch/x86/oprofile/op_model_amd.c:217: warning: no return statement in function returning non-void

Fix this by making op_amd_handle_ibs() return void.

Cc: Robert Richter <robert.richter@amd.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Robert Richter <robert.richter@amd.com>
---
 arch/x86/oprofile/op_model_amd.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/oprofile/op_model_amd.c b/arch/x86/oprofile/op_model_amd.c
index 37d19c768d5..39686c29f03 100644
--- a/arch/x86/oprofile/op_model_amd.c
+++ b/arch/x86/oprofile/op_model_amd.c
@@ -187,7 +187,7 @@ static void op_amd_setup_ctrs(struct op_x86_model_spec const *model,
 
 #ifdef CONFIG_OPROFILE_IBS
 
-static inline int
+static inline void
 op_amd_handle_ibs(struct pt_regs * const regs,
 		  struct op_msrs const * const msrs)
 {
@@ -195,7 +195,7 @@ op_amd_handle_ibs(struct pt_regs * const regs,
 	struct op_entry entry;
 
 	if (!has_ibs)
-		return 1;
+		return;
 
 	if (ibs_config.fetch_enabled) {
 		rdmsrl(MSR_AMD64_IBSFETCHCTL, ctl);
@@ -241,8 +241,6 @@ op_amd_handle_ibs(struct pt_regs * const regs,
 			wrmsrl(MSR_AMD64_IBSOPCTL, ctl);
 		}
 	}
-
-	return 1;
 }
 
 static inline void op_amd_start_ibs(void)
@@ -276,7 +274,7 @@ static void op_amd_stop_ibs(void)
 
 #else
 
-static inline int op_amd_handle_ibs(struct pt_regs * const regs,
+static inline void op_amd_handle_ibs(struct pt_regs * const regs,
 				    struct op_msrs const * const msrs) { }
 static inline void op_amd_start_ibs(void) { }
 static inline void op_amd_stop_ibs(void) { }
-- 
cgit v1.2.3


From 2977fb3ffc8493a2f4f0a362e8660a6cde9f1bb9 Mon Sep 17 00:00:00 2001
From: Cyrill Gorcunov <gorcunov@openvz.org>
Date: Sat, 1 Aug 2009 11:47:59 +0400
Subject: x86, ioapic: Introduce for_each_irq_pin() helper

This allow us to save a few lines of code.

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: yinghai@kernel.org
LKML-Reference: <20090801075435.597863129@openvz.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/apic/io_apic.c | 43 +++++++++++++++---------------------------
 1 file changed, 15 insertions(+), 28 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 7e92a9212fd..ffd8fdfcbe4 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -66,6 +66,8 @@
 #include <asm/apic.h>
 
 #define __apicdebuginit(type) static type __init
+#define for_each_irq_pin(entry, head) \
+	for (entry = head; entry; entry = entry->next)
 
 /*
  *      Is the SiS APIC rmw bug present ?
@@ -410,7 +412,7 @@ static bool io_apic_level_ack_pending(struct irq_cfg *cfg)
 	unsigned long flags;
 
 	spin_lock_irqsave(&ioapic_lock, flags);
-	for (entry = cfg->irq_2_pin; entry != NULL; entry = entry->next) {
+	for_each_irq_pin(entry, cfg->irq_2_pin) {
 		unsigned int reg;
 		int pin;
 
@@ -490,22 +492,21 @@ static void ioapic_mask_entry(int apic, int pin)
  */
 static void add_pin_to_irq_node(struct irq_cfg *cfg, int node, int apic, int pin)
 {
-	struct irq_pin_list **entryp, *entry;
+	struct irq_pin_list **last, *entry;
 
-	for (entryp = &cfg->irq_2_pin;
-	     *entryp != NULL;
-	     entryp = &(*entryp)->next) {
-		entry = *entryp;
-		/* not again, please */
+	/* don't allow duplicates */
+	last = &cfg->irq_2_pin;
+	for_each_irq_pin(entry, cfg->irq_2_pin) {
 		if (entry->apic == apic && entry->pin == pin)
 			return;
+		last = &entry->next;
 	}
 
 	entry = get_one_free_irq_2_pin(node);
 	entry->apic = apic;
 	entry->pin = pin;
 
-	*entryp = entry;
+	*last = entry;
 }
 
 /*
@@ -517,7 +518,7 @@ static void __init replace_pin_at_irq_node(struct irq_cfg *cfg, int node,
 {
 	struct irq_pin_list *entry;
 
-	for (entry = cfg->irq_2_pin; entry != NULL; entry = entry->next) {
+	for_each_irq_pin(entry, cfg->irq_2_pin) {
 		if (entry->apic == oldapic && entry->pin == oldpin) {
 			entry->apic = newapic;
 			entry->pin = newpin;
@@ -537,7 +538,7 @@ static void io_apic_modify_irq(struct irq_cfg *cfg,
 	int pin;
 	struct irq_pin_list *entry;
 
-	for (entry = cfg->irq_2_pin; entry != NULL; entry = entry->next) {
+	for_each_irq_pin(entry, cfg->irq_2_pin) {
 		unsigned int reg;
 		pin = entry->pin;
 		reg = io_apic_read(entry->apic, 0x10 + pin * 2);
@@ -1669,12 +1670,8 @@ __apicdebuginit(void) print_IO_APIC(void)
 		if (!entry)
 			continue;
 		printk(KERN_DEBUG "IRQ%d ", irq);
-		for (;;) {
+		for_each_irq_pin(entry, cfg->irq_2_pin)
 			printk("-> %d:%d", entry->apic, entry->pin);
-			if (!entry->next)
-				break;
-			entry = entry->next;
-		}
 		printk("\n");
 	}
 
@@ -2227,7 +2224,7 @@ static void __target_IO_APIC_irq(unsigned int irq, unsigned int dest, struct irq
 	struct irq_pin_list *entry;
 	u8 vector = cfg->vector;
 
-	for (entry = cfg->irq_2_pin; entry != NULL; entry = entry->next) {
+	for_each_irq_pin(entry, cfg->irq_2_pin) {
 		unsigned int reg;
 
 		apic = entry->apic;
@@ -2556,20 +2553,10 @@ static void ack_apic_level(unsigned int irq)
 #ifdef CONFIG_INTR_REMAP
 static void __eoi_ioapic_irq(unsigned int irq, struct irq_cfg *cfg)
 {
-	int apic, pin;
 	struct irq_pin_list *entry;
 
-	entry = cfg->irq_2_pin;
-	for (;;) {
-
-		if (!entry)
-			break;
-
-		apic = entry->apic;
-		pin = entry->pin;
-		io_apic_eoi(apic, pin);
-		entry = entry->next;
-	}
+	for_each_irq_pin(entry, cfg->irq_2_pin)
+		io_apic_eoi(entry->apic, entry->pin);
 }
 
 static void
-- 
cgit v1.2.3


From a7428cd2ef77734465e36bceb43290e37e2a97c6 Mon Sep 17 00:00:00 2001
From: Cyrill Gorcunov <gorcunov@openvz.org>
Date: Sat, 1 Aug 2009 11:48:00 +0400
Subject: x86, ioapic: Throw BUG instead of NULL dereference

Instead of plain NULL deref we better throw error
message with a backtrace. Actually we need more
gracious error handling here. Meanwhile leave it
as is.

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: yinghai@kernel.org
LKML-Reference: <20090801075435.769301745@openvz.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/apic/io_apic.c | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index ffd8fdfcbe4..2a145d3a837 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -503,6 +503,10 @@ static void add_pin_to_irq_node(struct irq_cfg *cfg, int node, int apic, int pin
 	}
 
 	entry = get_one_free_irq_2_pin(node);
+	if (!entry) {
+		printk(KERN_ERR "can not alloc irq_pin_list\n");
+		BUG_ON(1);
+	}
 	entry->apic = apic;
 	entry->pin = pin;
 
-- 
cgit v1.2.3


From 9910887af84e33ba98fd6792029470ae80166208 Mon Sep 17 00:00:00 2001
From: Cyrill Gorcunov <gorcunov@gmail.com>
Date: Thu, 23 Jul 2009 00:52:59 +0400
Subject: x86, apic: Drop redundant bit assignment

cpu_has_apic has already investigated boot_cpu_data
X86_FEATURE_APIC bit for being clear if condition is
triggered.

So there is no need to clear this bit second time.

Signed-off-by: Cyrill Gorcuno v <gorcunov@openvz.org>
Cc: "Maciej W. Rozycki" <macro@linux-mips.org>
LKML-Reference: <20090722205259.GE15805@lenovo>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/apic/apic.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 0a1c2830ec6..0b021c56e82 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -1651,7 +1651,6 @@ int __init APIC_init_uniprocessor(void)
 	    APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid])) {
 		pr_err("BIOS bug, local APIC 0x%x not detected!...\n",
 			boot_cpu_physical_apicid);
-		clear_cpu_cap(&boot_cpu_data, X86_FEATURE_APIC);
 		return -1;
 	}
 #endif
-- 
cgit v1.2.3


From ce69a784504222c3ab6f1b3c357d09ec5772127a Mon Sep 17 00:00:00 2001
From: Gleb Natapov <gleb@redhat.com>
Date: Mon, 20 Jul 2009 15:24:17 +0300
Subject: x86/apic: Enable x2APIC without interrupt remapping under KVM

KVM would like to provide x2APIC interface to a guest without emulating
interrupt remapping device. The reason KVM prefers guest to use x2APIC
is that x2APIC interface is better virtualizable and provides better
performance than mmio xAPIC interface:

 - msr exits are faster than mmio (no page table walk, emulation)
 - no need to read back ICR to look at the busy bit
 - one 64 bit ICR write instead of two 32 bit writes
 - shared code with the Hyper-V paravirt interface

Included patch changes x2APIC enabling logic to enable it even if IR
initialization failed, but kernel runs under KVM and no apic id is
greater than 255 (if there is one spec requires BIOS to move to x2apic
mode before starting an OS).

-v2: fix build
-v3: fix bug causing compiler warning

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Acked-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Sheng Yang <sheng@linux.intel.com>
Cc: "avi@redhat.com" <avi@redhat.com>
LKML-Reference: <20090720122417.GR5638@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/apic.h     |  7 ++++
 arch/x86/kernel/apic/apic.c     | 83 +++++++++++++++++++++++------------------
 arch/x86/kernel/apic/probe_64.c |  6 +--
 3 files changed, 56 insertions(+), 40 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index bb7d4792584..586b7adb8e5 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -183,6 +183,10 @@ static inline int x2apic_enabled(void)
 }
 
 #define x2apic_supported()	(cpu_has_x2apic)
+static inline void x2apic_force_phys(void)
+{
+	x2apic_phys = 1;
+}
 #else
 static inline void check_x2apic(void)
 {
@@ -194,6 +198,9 @@ static inline int x2apic_enabled(void)
 {
 	return 0;
 }
+static inline void x2apic_force_phys(void)
+{
+}
 
 #define	x2apic_preenabled 0
 #define	x2apic_supported()	0
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 0b021c56e82..de039fcdd05 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -49,6 +49,7 @@
 #include <asm/mtrr.h>
 #include <asm/smp.h>
 #include <asm/mce.h>
+#include <asm/kvm_para.h>
 
 unsigned int num_processors;
 
@@ -1361,52 +1362,76 @@ void enable_x2apic(void)
 }
 #endif /* CONFIG_X86_X2APIC */
 
-void __init enable_IR_x2apic(void)
+int __init enable_IR(void)
 {
 #ifdef CONFIG_INTR_REMAP
 	int ret;
-	unsigned long flags;
-	struct IO_APIC_route_entry **ioapic_entries = NULL;
 
 	ret = dmar_table_init();
 	if (ret) {
 		pr_debug("dmar_table_init() failed with %d:\n", ret);
-		goto ir_failed;
+		return 0;
 	}
 
 	if (!intr_remapping_supported()) {
 		pr_debug("intr-remapping not supported\n");
-		goto ir_failed;
+		return 0;
 	}
 
-
 	if (!x2apic_preenabled && skip_ioapic_setup) {
 		pr_info("Skipped enabling intr-remap because of skipping "
 			"io-apic setup\n");
-		return;
+		return 0;
 	}
 
+	if (enable_intr_remapping(x2apic_supported()))
+		return 0;
+
+	pr_info("Enabled Interrupt-remapping\n");
+
+	return 1;
+
+#endif
+	return 0;
+}
+
+void __init enable_IR_x2apic(void)
+{
+	unsigned long flags;
+	struct IO_APIC_route_entry **ioapic_entries = NULL;
+	int ret, x2apic_enabled = 0;
+
 	ioapic_entries = alloc_ioapic_entries();
 	if (!ioapic_entries) {
-		pr_info("Allocate ioapic_entries failed: %d\n", ret);
-		goto end;
+		pr_err("Allocate ioapic_entries failed\n");
+		goto out;
 	}
 
 	ret = save_IO_APIC_setup(ioapic_entries);
 	if (ret) {
 		pr_info("Saving IO-APIC state failed: %d\n", ret);
-		goto end;
+		goto out;
 	}
 
 	local_irq_save(flags);
-	mask_IO_APIC_setup(ioapic_entries);
 	mask_8259A();
+	mask_IO_APIC_setup(ioapic_entries);
 
-	ret = enable_intr_remapping(x2apic_supported());
-	if (ret)
-		goto end_restore;
+	ret = enable_IR();
+	if (!ret) {
+		/* IR is required if there is APIC ID > 255 even when running
+		 * under KVM
+		 */
+		if (max_physical_apicid > 255 || !kvm_para_available())
+			goto nox2apic;
+		/*
+		 * without IR all CPUs can be addressed by IOAPIC/MSI
+		 * only in physical mode
+		 */
+		x2apic_force_phys();
+	}
 
-	pr_info("Enabled Interrupt-remapping\n");
+	x2apic_enabled = 1;
 
 	if (x2apic_supported() && !x2apic_mode) {
 		x2apic_mode = 1;
@@ -1414,41 +1439,25 @@ void __init enable_IR_x2apic(void)
 		pr_info("Enabled x2apic\n");
 	}
 
-end_restore:
-	if (ret)
-		/*
-		 * IR enabling failed
-		 */
+nox2apic:
+	if (!ret) /* IR enabling failed */
 		restore_IO_APIC_setup(ioapic_entries);
-
 	unmask_8259A();
 	local_irq_restore(flags);
 
-end:
+out:
 	if (ioapic_entries)
 		free_ioapic_entries(ioapic_entries);
 
-	if (!ret)
+	if (x2apic_enabled)
 		return;
 
-ir_failed:
 	if (x2apic_preenabled)
-		panic("x2apic enabled by bios. But IR enabling failed");
+		panic("x2apic: enabled by BIOS but kernel init failed.");
 	else if (cpu_has_x2apic)
-		pr_info("Not enabling x2apic,Intr-remapping\n");
-#else
-	if (!cpu_has_x2apic)
-		return;
-
-	if (x2apic_preenabled)
-		panic("x2apic enabled prior OS handover,"
-		      " enable CONFIG_X86_X2APIC, CONFIG_INTR_REMAP");
-#endif
-
-	return;
+		pr_info("Not enabling x2apic, Intr-remapping init failed.\n");
 }
 
-
 #ifdef CONFIG_X86_64
 /*
  * Detect and enable local APICs on non-SMP boards.
diff --git a/arch/x86/kernel/apic/probe_64.c b/arch/x86/kernel/apic/probe_64.c
index bc3e880f9b8..f3b1037076e 100644
--- a/arch/x86/kernel/apic/probe_64.c
+++ b/arch/x86/kernel/apic/probe_64.c
@@ -50,11 +50,11 @@ static struct apic *apic_probe[] __initdata = {
 void __init default_setup_apic_routing(void)
 {
 #ifdef CONFIG_X86_X2APIC
-	if (x2apic_mode && (apic != &apic_x2apic_phys &&
+	if (x2apic_mode
 #ifdef CONFIG_X86_UV
-		       apic != &apic_x2apic_uv_x &&
+		       && apic != &apic_x2apic_uv_x
 #endif
-		       apic != &apic_x2apic_cluster)) {
+		       ) {
 		if (x2apic_phys)
 			apic = &apic_x2apic_phys;
 		else
-- 
cgit v1.2.3


From 1e2c8d830a74c24ccb25601bd89dcd0dbcb4e9f5 Mon Sep 17 00:00:00 2001
From: Florian Fainelli <florian@openwrt.org>
Date: Tue, 4 Aug 2009 10:52:47 +0000
Subject: ar7: add fixed PHY support for the two on-board cpmac

This patch adds fixed PHY support for the two on-chip
cpmac Ethernet adapters.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/mips/ar7/platform.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

(limited to 'arch')

diff --git a/arch/mips/ar7/platform.c b/arch/mips/ar7/platform.c
index 54224496178..c4737ce6d29 100644
--- a/arch/mips/ar7/platform.c
+++ b/arch/mips/ar7/platform.c
@@ -33,6 +33,8 @@
 #include <linux/leds.h>
 #include <linux/string.h>
 #include <linux/etherdevice.h>
+#include <linux/phy.h>
+#include <linux/phy_fixed.h>
 
 #include <asm/addrspace.h>
 #include <asm/mach-ar7/ar7.h>
@@ -209,6 +211,12 @@ static struct physmap_flash_data physmap_flash_data = {
 	.width = 2,
 };
 
+static struct fixed_phy_status fixed_phy_status __initdata = {
+	.link = 1,
+	.speed = 100,
+	.duplex = 1,
+};
+
 static struct plat_cpmac_data cpmac_low_data = {
 	.reset_bit = 17,
 	.power_bit = 20,
@@ -530,6 +538,9 @@ static int __init ar7_register_devices(void)
 	}
 
 	if (ar7_has_high_cpmac()) {
+		res = fixed_phy_add(PHY_POLL, cpmac_high.id, &fixed_phy_status);
+		if (res && res != -ENODEV)
+			return res;
 		cpmac_get_mac(1, cpmac_high_data.dev_addr);
 		res = platform_device_register(&cpmac_high);
 		if (res)
@@ -538,6 +549,10 @@ static int __init ar7_register_devices(void)
 		cpmac_low_data.phy_mask = 0xffffffff;
 	}
 
+	res = fixed_phy_add(PHY_POLL, cpmac_low.id, &fixed_phy_status);
+	if (res && res != -ENODEV)
+		return res;
+
 	cpmac_get_mac(0, cpmac_low_data.dev_addr);
 	res = platform_device_register(&cpmac_low);
 	if (res)
-- 
cgit v1.2.3


From 49c794e94649020248e37b78db16cd25bad38b4f Mon Sep 17 00:00:00 2001
From: Jan Engelhardt <jengelh@medozas.de>
Date: Tue, 4 Aug 2009 07:28:28 +0000
Subject: net: implement a SO_PROTOCOL getsockoption

Similar to SO_TYPE returning the socket type, SO_PROTOCOL allows to
retrieve the protocol used with a given socket.

I am not quite sure why we have that-many copies of socket.h, and why
the values are not the same on all arches either, but for where hex
numbers dominate, I use 0x1029 for SO_PROTOCOL as that seems to be
the next free unused number across a bunch of operating systems, or
so Google results make me want to believe. SO_PROTOCOL for others
just uses the next free Linux number, 38.

Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/alpha/include/asm/socket.h      | 1 +
 arch/arm/include/asm/socket.h        | 2 ++
 arch/avr32/include/asm/socket.h      | 2 ++
 arch/cris/include/asm/socket.h       | 2 ++
 arch/frv/include/asm/socket.h        | 2 ++
 arch/h8300/include/asm/socket.h      | 2 ++
 arch/ia64/include/asm/socket.h       | 2 ++
 arch/m32r/include/asm/socket.h       | 2 ++
 arch/m68k/include/asm/socket.h       | 2 ++
 arch/microblaze/include/asm/socket.h | 2 ++
 arch/mips/include/asm/socket.h       | 1 +
 arch/mn10300/include/asm/socket.h    | 2 ++
 arch/parisc/include/asm/socket.h     | 1 +
 arch/powerpc/include/asm/socket.h    | 2 ++
 arch/s390/include/asm/socket.h       | 2 ++
 arch/sparc/include/asm/socket.h      | 2 ++
 arch/x86/include/asm/socket.h        | 2 ++
 arch/xtensa/include/asm/socket.h     | 2 ++
 18 files changed, 33 insertions(+)

(limited to 'arch')

diff --git a/arch/alpha/include/asm/socket.h b/arch/alpha/include/asm/socket.h
index 3641ec1452f..2f8b4d37774 100644
--- a/arch/alpha/include/asm/socket.h
+++ b/arch/alpha/include/asm/socket.h
@@ -32,6 +32,7 @@
 #define	SO_RCVTIMEO	0x1012
 #define	SO_SNDTIMEO	0x1013
 #define SO_ACCEPTCONN	0x1014
+#define SO_PROTOCOL	0x1028
 
 /* linux-specific, might as well be the same as on i386 */
 #define SO_NO_CHECK	11
diff --git a/arch/arm/include/asm/socket.h b/arch/arm/include/asm/socket.h
index 537de4e0ef5..7f47454ffbf 100644
--- a/arch/arm/include/asm/socket.h
+++ b/arch/arm/include/asm/socket.h
@@ -57,4 +57,6 @@
 #define SO_TIMESTAMPING		37
 #define SCM_TIMESTAMPING	SO_TIMESTAMPING
 
+#define SO_PROTOCOL		38
+
 #endif /* _ASM_SOCKET_H */
diff --git a/arch/avr32/include/asm/socket.h b/arch/avr32/include/asm/socket.h
index 04c86061970..6af2866a4f0 100644
--- a/arch/avr32/include/asm/socket.h
+++ b/arch/avr32/include/asm/socket.h
@@ -57,4 +57,6 @@
 #define SO_TIMESTAMPING		37
 #define SCM_TIMESTAMPING	SO_TIMESTAMPING
 
+#define SO_PROTOCOL		38
+
 #endif /* __ASM_AVR32_SOCKET_H */
diff --git a/arch/cris/include/asm/socket.h b/arch/cris/include/asm/socket.h
index d5cf7400540..f3859fb0990 100644
--- a/arch/cris/include/asm/socket.h
+++ b/arch/cris/include/asm/socket.h
@@ -59,6 +59,8 @@
 #define SO_TIMESTAMPING		37
 #define SCM_TIMESTAMPING	SO_TIMESTAMPING
 
+#define SO_PROTOCOL		38
+
 #endif /* _ASM_SOCKET_H */
 
 
diff --git a/arch/frv/include/asm/socket.h b/arch/frv/include/asm/socket.h
index 57c3d4054e8..8dab3486ffa 100644
--- a/arch/frv/include/asm/socket.h
+++ b/arch/frv/include/asm/socket.h
@@ -57,5 +57,7 @@
 #define SO_TIMESTAMPING		37
 #define SCM_TIMESTAMPING	SO_TIMESTAMPING
 
+#define SO_PROTOCOL		38
+
 #endif /* _ASM_SOCKET_H */
 
diff --git a/arch/h8300/include/asm/socket.h b/arch/h8300/include/asm/socket.h
index 602518a70a1..ba770d09cd6 100644
--- a/arch/h8300/include/asm/socket.h
+++ b/arch/h8300/include/asm/socket.h
@@ -57,4 +57,6 @@
 #define SO_TIMESTAMPING		37
 #define SCM_TIMESTAMPING	SO_TIMESTAMPING
 
+#define SO_PROTOCOL		38
+
 #endif /* _ASM_SOCKET_H */
diff --git a/arch/ia64/include/asm/socket.h b/arch/ia64/include/asm/socket.h
index 745421225ec..091cd9d47d0 100644
--- a/arch/ia64/include/asm/socket.h
+++ b/arch/ia64/include/asm/socket.h
@@ -66,4 +66,6 @@
 #define SO_TIMESTAMPING		37
 #define SCM_TIMESTAMPING	SO_TIMESTAMPING
 
+#define SO_PROTOCOL		38
+
 #endif /* _ASM_IA64_SOCKET_H */
diff --git a/arch/m32r/include/asm/socket.h b/arch/m32r/include/asm/socket.h
index be7ed589af5..d36f5928fb7 100644
--- a/arch/m32r/include/asm/socket.h
+++ b/arch/m32r/include/asm/socket.h
@@ -57,4 +57,6 @@
 #define SO_TIMESTAMPING		37
 #define SCM_TIMESTAMPING	SO_TIMESTAMPING
 
+#define SO_PROTOCOL		38
+
 #endif /* _ASM_M32R_SOCKET_H */
diff --git a/arch/m68k/include/asm/socket.h b/arch/m68k/include/asm/socket.h
index ca87f938b03..060cb7ed024 100644
--- a/arch/m68k/include/asm/socket.h
+++ b/arch/m68k/include/asm/socket.h
@@ -57,4 +57,6 @@
 #define SO_TIMESTAMPING		37
 #define SCM_TIMESTAMPING	SO_TIMESTAMPING
 
+#define SO_PROTOCOL		38
+
 #endif /* _ASM_SOCKET_H */
diff --git a/arch/microblaze/include/asm/socket.h b/arch/microblaze/include/asm/socket.h
index 82593686031..96bf8bfa935 100644
--- a/arch/microblaze/include/asm/socket.h
+++ b/arch/microblaze/include/asm/socket.h
@@ -66,4 +66,6 @@
 #define SO_TIMESTAMPING		37
 #define SCM_TIMESTAMPING	SO_TIMESTAMPING
 
+#define SO_PROTOCOL		38
+
 #endif /* _ASM_MICROBLAZE_SOCKET_H */
diff --git a/arch/mips/include/asm/socket.h b/arch/mips/include/asm/socket.h
index 2abca178016..289ce5f5f2a 100644
--- a/arch/mips/include/asm/socket.h
+++ b/arch/mips/include/asm/socket.h
@@ -42,6 +42,7 @@ To add: #define SO_REUSEPORT 0x0200	/* Allow local address and port reuse.  */
 #define SO_SNDTIMEO	0x1005	/* send timeout */
 #define SO_RCVTIMEO 	0x1006	/* receive timeout */
 #define SO_ACCEPTCONN	0x1009
+#define SO_PROTOCOL	0x1028	/* protocol type */
 
 /* linux-specific, might as well be the same as on i386 */
 #define SO_NO_CHECK	11
diff --git a/arch/mn10300/include/asm/socket.h b/arch/mn10300/include/asm/socket.h
index fb5daf438ec..19d7cf709b7 100644
--- a/arch/mn10300/include/asm/socket.h
+++ b/arch/mn10300/include/asm/socket.h
@@ -57,4 +57,6 @@
 #define SO_TIMESTAMPING		37
 #define SCM_TIMESTAMPING	SO_TIMESTAMPING
 
+#define SO_PROTOCOL		38
+
 #endif /* _ASM_SOCKET_H */
diff --git a/arch/parisc/include/asm/socket.h b/arch/parisc/include/asm/socket.h
index 885472bf7b7..a658b09df62 100644
--- a/arch/parisc/include/asm/socket.h
+++ b/arch/parisc/include/asm/socket.h
@@ -24,6 +24,7 @@
 #define SO_RCVTIMEO	0x1006
 #define SO_ERROR	0x1007
 #define SO_TYPE		0x1008
+#define SO_PROTOCOL	0x1028
 #define SO_PEERNAME	0x2000
 
 #define SO_NO_CHECK	0x400b
diff --git a/arch/powerpc/include/asm/socket.h b/arch/powerpc/include/asm/socket.h
index 1e5cfad0e3f..609049d7117 100644
--- a/arch/powerpc/include/asm/socket.h
+++ b/arch/powerpc/include/asm/socket.h
@@ -64,4 +64,6 @@
 #define SO_TIMESTAMPING		37
 #define SCM_TIMESTAMPING	SO_TIMESTAMPING
 
+#define SO_PROTOCOL		38
+
 #endif	/* _ASM_POWERPC_SOCKET_H */
diff --git a/arch/s390/include/asm/socket.h b/arch/s390/include/asm/socket.h
index 02330c50241..65baa9a83ab 100644
--- a/arch/s390/include/asm/socket.h
+++ b/arch/s390/include/asm/socket.h
@@ -65,4 +65,6 @@
 #define SO_TIMESTAMPING		37
 #define SCM_TIMESTAMPING	SO_TIMESTAMPING
 
+#define SO_PROTOCOL		38
+
 #endif /* _ASM_SOCKET_H */
diff --git a/arch/sparc/include/asm/socket.h b/arch/sparc/include/asm/socket.h
index 982a12f959f..9cbbfafd053 100644
--- a/arch/sparc/include/asm/socket.h
+++ b/arch/sparc/include/asm/socket.h
@@ -29,6 +29,8 @@
 #define SO_RCVBUFFORCE	0x100b
 #define SO_ERROR	0x1007
 #define SO_TYPE		0x1008
+#define SO_PROTOCOL	0x1028
+
 
 /* Linux specific, keep the same. */
 #define SO_NO_CHECK	0x000b
diff --git a/arch/x86/include/asm/socket.h b/arch/x86/include/asm/socket.h
index ca8bf2cd0ba..1077d2535a3 100644
--- a/arch/x86/include/asm/socket.h
+++ b/arch/x86/include/asm/socket.h
@@ -57,4 +57,6 @@
 #define SO_TIMESTAMPING		37
 #define SCM_TIMESTAMPING	SO_TIMESTAMPING
 
+#define SO_PROTOCOL		38
+
 #endif /* _ASM_X86_SOCKET_H */
diff --git a/arch/xtensa/include/asm/socket.h b/arch/xtensa/include/asm/socket.h
index dd1a7a4a1ce..e47f172142f 100644
--- a/arch/xtensa/include/asm/socket.h
+++ b/arch/xtensa/include/asm/socket.h
@@ -68,4 +68,6 @@
 #define SO_TIMESTAMPING		37
 #define SCM_TIMESTAMPING	SO_TIMESTAMPING
 
+#define SO_PROTOCOL		38
+
 #endif	/* _XTENSA_SOCKET_H */
-- 
cgit v1.2.3


From 0d6038ee76f2e06b79d0465807f67e86bf4025de Mon Sep 17 00:00:00 2001
From: Jan Engelhardt <jengelh@medozas.de>
Date: Tue, 4 Aug 2009 07:28:29 +0000
Subject: net: implement a SO_DOMAIN getsockoption
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

This sockopt goes in line with SO_TYPE and SO_PROTOCOL. It makes it
possible for userspace programs to pass around file descriptors — I
am referring to arguments-to-functions, but it may even work for the
fd passing over UNIX sockets — without needing to also pass the
auxiliary information (PF_INET6/IPPROTO_TCP).

Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/alpha/include/asm/socket.h      | 1 +
 arch/arm/include/asm/socket.h        | 1 +
 arch/avr32/include/asm/socket.h      | 1 +
 arch/cris/include/asm/socket.h       | 1 +
 arch/frv/include/asm/socket.h        | 1 +
 arch/h8300/include/asm/socket.h      | 1 +
 arch/ia64/include/asm/socket.h       | 1 +
 arch/m32r/include/asm/socket.h       | 1 +
 arch/m68k/include/asm/socket.h       | 1 +
 arch/microblaze/include/asm/socket.h | 1 +
 arch/mips/include/asm/socket.h       | 1 +
 arch/mn10300/include/asm/socket.h    | 1 +
 arch/parisc/include/asm/socket.h     | 1 +
 arch/powerpc/include/asm/socket.h    | 1 +
 arch/s390/include/asm/socket.h       | 1 +
 arch/sparc/include/asm/socket.h      | 1 +
 arch/x86/include/asm/socket.h        | 1 +
 arch/xtensa/include/asm/socket.h     | 1 +
 18 files changed, 18 insertions(+)

(limited to 'arch')

diff --git a/arch/alpha/include/asm/socket.h b/arch/alpha/include/asm/socket.h
index 2f8b4d37774..26773e3246e 100644
--- a/arch/alpha/include/asm/socket.h
+++ b/arch/alpha/include/asm/socket.h
@@ -33,6 +33,7 @@
 #define	SO_SNDTIMEO	0x1013
 #define SO_ACCEPTCONN	0x1014
 #define SO_PROTOCOL	0x1028
+#define SO_DOMAIN	0x1029
 
 /* linux-specific, might as well be the same as on i386 */
 #define SO_NO_CHECK	11
diff --git a/arch/arm/include/asm/socket.h b/arch/arm/include/asm/socket.h
index 7f47454ffbf..92ac61d294f 100644
--- a/arch/arm/include/asm/socket.h
+++ b/arch/arm/include/asm/socket.h
@@ -58,5 +58,6 @@
 #define SCM_TIMESTAMPING	SO_TIMESTAMPING
 
 #define SO_PROTOCOL		38
+#define SO_DOMAIN		39
 
 #endif /* _ASM_SOCKET_H */
diff --git a/arch/avr32/include/asm/socket.h b/arch/avr32/include/asm/socket.h
index 6af2866a4f0..fe863f9794d 100644
--- a/arch/avr32/include/asm/socket.h
+++ b/arch/avr32/include/asm/socket.h
@@ -58,5 +58,6 @@
 #define SCM_TIMESTAMPING	SO_TIMESTAMPING
 
 #define SO_PROTOCOL		38
+#define SO_DOMAIN		39
 
 #endif /* __ASM_AVR32_SOCKET_H */
diff --git a/arch/cris/include/asm/socket.h b/arch/cris/include/asm/socket.h
index f3859fb0990..45ec49bdb7b 100644
--- a/arch/cris/include/asm/socket.h
+++ b/arch/cris/include/asm/socket.h
@@ -60,6 +60,7 @@
 #define SCM_TIMESTAMPING	SO_TIMESTAMPING
 
 #define SO_PROTOCOL		38
+#define SO_DOMAIN		39
 
 #endif /* _ASM_SOCKET_H */
 
diff --git a/arch/frv/include/asm/socket.h b/arch/frv/include/asm/socket.h
index 8dab3486ffa..2dea726095c 100644
--- a/arch/frv/include/asm/socket.h
+++ b/arch/frv/include/asm/socket.h
@@ -58,6 +58,7 @@
 #define SCM_TIMESTAMPING	SO_TIMESTAMPING
 
 #define SO_PROTOCOL		38
+#define SO_DOMAIN		39
 
 #endif /* _ASM_SOCKET_H */
 
diff --git a/arch/h8300/include/asm/socket.h b/arch/h8300/include/asm/socket.h
index ba770d09cd6..1547f01c8e2 100644
--- a/arch/h8300/include/asm/socket.h
+++ b/arch/h8300/include/asm/socket.h
@@ -58,5 +58,6 @@
 #define SCM_TIMESTAMPING	SO_TIMESTAMPING
 
 #define SO_PROTOCOL		38
+#define SO_DOMAIN		39
 
 #endif /* _ASM_SOCKET_H */
diff --git a/arch/ia64/include/asm/socket.h b/arch/ia64/include/asm/socket.h
index 091cd9d47d0..0b0d5ff062e 100644
--- a/arch/ia64/include/asm/socket.h
+++ b/arch/ia64/include/asm/socket.h
@@ -67,5 +67,6 @@
 #define SCM_TIMESTAMPING	SO_TIMESTAMPING
 
 #define SO_PROTOCOL		38
+#define SO_DOMAIN		39
 
 #endif /* _ASM_IA64_SOCKET_H */
diff --git a/arch/m32r/include/asm/socket.h b/arch/m32r/include/asm/socket.h
index d36f5928fb7..3390a864f22 100644
--- a/arch/m32r/include/asm/socket.h
+++ b/arch/m32r/include/asm/socket.h
@@ -58,5 +58,6 @@
 #define SCM_TIMESTAMPING	SO_TIMESTAMPING
 
 #define SO_PROTOCOL		38
+#define SO_DOMAIN		39
 
 #endif /* _ASM_M32R_SOCKET_H */
diff --git a/arch/m68k/include/asm/socket.h b/arch/m68k/include/asm/socket.h
index 060cb7ed024..eee01cce921 100644
--- a/arch/m68k/include/asm/socket.h
+++ b/arch/m68k/include/asm/socket.h
@@ -58,5 +58,6 @@
 #define SCM_TIMESTAMPING	SO_TIMESTAMPING
 
 #define SO_PROTOCOL		38
+#define SO_DOMAIN		39
 
 #endif /* _ASM_SOCKET_H */
diff --git a/arch/microblaze/include/asm/socket.h b/arch/microblaze/include/asm/socket.h
index 96bf8bfa935..7361ae7cfcd 100644
--- a/arch/microblaze/include/asm/socket.h
+++ b/arch/microblaze/include/asm/socket.h
@@ -67,5 +67,6 @@
 #define SCM_TIMESTAMPING	SO_TIMESTAMPING
 
 #define SO_PROTOCOL		38
+#define SO_DOMAIN		39
 
 #endif /* _ASM_MICROBLAZE_SOCKET_H */
diff --git a/arch/mips/include/asm/socket.h b/arch/mips/include/asm/socket.h
index 289ce5f5f2a..ae05accd9fe 100644
--- a/arch/mips/include/asm/socket.h
+++ b/arch/mips/include/asm/socket.h
@@ -43,6 +43,7 @@ To add: #define SO_REUSEPORT 0x0200	/* Allow local address and port reuse.  */
 #define SO_RCVTIMEO 	0x1006	/* receive timeout */
 #define SO_ACCEPTCONN	0x1009
 #define SO_PROTOCOL	0x1028	/* protocol type */
+#define SO_DOMAIN	0x1029	/* domain/socket family */
 
 /* linux-specific, might as well be the same as on i386 */
 #define SO_NO_CHECK	11
diff --git a/arch/mn10300/include/asm/socket.h b/arch/mn10300/include/asm/socket.h
index 19d7cf709b7..4df75af29d7 100644
--- a/arch/mn10300/include/asm/socket.h
+++ b/arch/mn10300/include/asm/socket.h
@@ -58,5 +58,6 @@
 #define SCM_TIMESTAMPING	SO_TIMESTAMPING
 
 #define SO_PROTOCOL		38
+#define SO_DOMAIN		39
 
 #endif /* _ASM_SOCKET_H */
diff --git a/arch/parisc/include/asm/socket.h b/arch/parisc/include/asm/socket.h
index a658b09df62..960b1e5d8e1 100644
--- a/arch/parisc/include/asm/socket.h
+++ b/arch/parisc/include/asm/socket.h
@@ -25,6 +25,7 @@
 #define SO_ERROR	0x1007
 #define SO_TYPE		0x1008
 #define SO_PROTOCOL	0x1028
+#define SO_DOMAIN	0x1029
 #define SO_PEERNAME	0x2000
 
 #define SO_NO_CHECK	0x400b
diff --git a/arch/powerpc/include/asm/socket.h b/arch/powerpc/include/asm/socket.h
index 609049d7117..3ab8b3e6feb 100644
--- a/arch/powerpc/include/asm/socket.h
+++ b/arch/powerpc/include/asm/socket.h
@@ -65,5 +65,6 @@
 #define SCM_TIMESTAMPING	SO_TIMESTAMPING
 
 #define SO_PROTOCOL		38
+#define SO_DOMAIN		39
 
 #endif	/* _ASM_POWERPC_SOCKET_H */
diff --git a/arch/s390/include/asm/socket.h b/arch/s390/include/asm/socket.h
index 65baa9a83ab..e42df89a0b8 100644
--- a/arch/s390/include/asm/socket.h
+++ b/arch/s390/include/asm/socket.h
@@ -66,5 +66,6 @@
 #define SCM_TIMESTAMPING	SO_TIMESTAMPING
 
 #define SO_PROTOCOL		38
+#define SO_DOMAIN		39
 
 #endif /* _ASM_SOCKET_H */
diff --git a/arch/sparc/include/asm/socket.h b/arch/sparc/include/asm/socket.h
index 9cbbfafd053..3a5ae3d1208 100644
--- a/arch/sparc/include/asm/socket.h
+++ b/arch/sparc/include/asm/socket.h
@@ -30,6 +30,7 @@
 #define SO_ERROR	0x1007
 #define SO_TYPE		0x1008
 #define SO_PROTOCOL	0x1028
+#define SO_DOMAIN	0x1029
 
 
 /* Linux specific, keep the same. */
diff --git a/arch/x86/include/asm/socket.h b/arch/x86/include/asm/socket.h
index 1077d2535a3..b2a8c74f2d0 100644
--- a/arch/x86/include/asm/socket.h
+++ b/arch/x86/include/asm/socket.h
@@ -58,5 +58,6 @@
 #define SCM_TIMESTAMPING	SO_TIMESTAMPING
 
 #define SO_PROTOCOL		38
+#define SO_DOMAIN		39
 
 #endif /* _ASM_X86_SOCKET_H */
diff --git a/arch/xtensa/include/asm/socket.h b/arch/xtensa/include/asm/socket.h
index e47f172142f..beb3a6bdb61 100644
--- a/arch/xtensa/include/asm/socket.h
+++ b/arch/xtensa/include/asm/socket.h
@@ -69,5 +69,6 @@
 #define SCM_TIMESTAMPING	SO_TIMESTAMPING
 
 #define SO_PROTOCOL		38
+#define SO_DOMAIN		39
 
 #endif	/* _XTENSA_SOCKET_H */
-- 
cgit v1.2.3


From c12abc012e18b362204345c323536f228d65c4db Mon Sep 17 00:00:00 2001
From: Jarkko Nikula <jhnikula@gmail.com>
Date: Fri, 7 Aug 2009 09:59:47 +0300
Subject: ARM: OMAP: McBSP: Fix ASoC on OMAP1510 by fixing API of
 omap_mcbsp_start/stop

Simultaneous audio playback and capture on OMAP1510 can cause that second
stream is stalled if there is enough delay between startup of the audio
streams.

Current implementation of the omap_mcbsp_start is starting both transmitter
and receiver at the same time and it is called only for firstly started
audio stream from the OMAP McBSP based ASoC DAI driver.

Since DMA request lines on OMAP1510 are edge sensitive, the DMA request is
missed if there is no DMA transfer set up at that time when the first word
after McBSP startup is transmitted. The problem hasn't noted before since
later OMAPs are using level sensitive DMA request lines.

Fix the problem by changing API of omap_mcbsp_start and omap_mcbsp_stop by
allowing to start and stop individually McBSP transmitter and receiver
logics. Then call those functions individually for both audio playback
and capture streams. This ensures that DMA transfer is setup before
transmitter or receiver is started.

Thanks to Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> for detailed problem
analysis and Peter Ujfalusi <peter.ujfalusi@nokia.com> for info about DMA
request line behavior differences between the OMAP generations.

Reported-and-tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Jarkko Nikula <jhnikula@gmail.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 arch/arm/plat-omap/include/mach/mcbsp.h |  4 +--
 arch/arm/plat-omap/mcbsp.c              | 50 +++++++++++++++++++++------------
 2 files changed, 34 insertions(+), 20 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h
index bb154ea7676..57249bb1e9b 100644
--- a/arch/arm/plat-omap/include/mach/mcbsp.h
+++ b/arch/arm/plat-omap/include/mach/mcbsp.h
@@ -387,8 +387,8 @@ void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config,
 void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg * config);
 int omap_mcbsp_request(unsigned int id);
 void omap_mcbsp_free(unsigned int id);
-void omap_mcbsp_start(unsigned int id);
-void omap_mcbsp_stop(unsigned int id);
+void omap_mcbsp_start(unsigned int id, int tx, int rx);
+void omap_mcbsp_stop(unsigned int id, int tx, int rx);
 void omap_mcbsp_xmit_word(unsigned int id, u32 word);
 u32 omap_mcbsp_recv_word(unsigned int id);
 
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index efa0e0111f3..a3d2313460b 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -328,14 +328,15 @@ void omap_mcbsp_free(unsigned int id)
 EXPORT_SYMBOL(omap_mcbsp_free);
 
 /*
- * Here we start the McBSP, by enabling the sample
- * generator, both transmitter and receivers,
- * and the frame sync.
+ * Here we start the McBSP, by enabling transmitter, receiver or both.
+ * If no transmitter or receiver is active prior calling, then sample-rate
+ * generator and frame sync are started.
  */
-void omap_mcbsp_start(unsigned int id)
+void omap_mcbsp_start(unsigned int id, int tx, int rx)
 {
 	struct omap_mcbsp *mcbsp;
 	void __iomem *io_base;
+	int idle;
 	u16 w;
 
 	if (!omap_mcbsp_check_valid_id(id)) {
@@ -348,32 +349,40 @@ void omap_mcbsp_start(unsigned int id)
 	mcbsp->rx_word_length = (OMAP_MCBSP_READ(io_base, RCR1) >> 5) & 0x7;
 	mcbsp->tx_word_length = (OMAP_MCBSP_READ(io_base, XCR1) >> 5) & 0x7;
 
-	/* Start the sample generator */
-	w = OMAP_MCBSP_READ(io_base, SPCR2);
-	OMAP_MCBSP_WRITE(io_base, SPCR2, w | (1 << 6));
+	idle = !((OMAP_MCBSP_READ(io_base, SPCR2) |
+		  OMAP_MCBSP_READ(io_base, SPCR1)) & 1);
+
+	if (idle) {
+		/* Start the sample generator */
+		w = OMAP_MCBSP_READ(io_base, SPCR2);
+		OMAP_MCBSP_WRITE(io_base, SPCR2, w | (1 << 6));
+	}
 
 	/* Enable transmitter and receiver */
 	w = OMAP_MCBSP_READ(io_base, SPCR2);
-	OMAP_MCBSP_WRITE(io_base, SPCR2, w | 1);
+	OMAP_MCBSP_WRITE(io_base, SPCR2, w | (tx & 1));
 
 	w = OMAP_MCBSP_READ(io_base, SPCR1);
-	OMAP_MCBSP_WRITE(io_base, SPCR1, w | 1);
+	OMAP_MCBSP_WRITE(io_base, SPCR1, w | (rx & 1));
 
 	udelay(100);
 
-	/* Start frame sync */
-	w = OMAP_MCBSP_READ(io_base, SPCR2);
-	OMAP_MCBSP_WRITE(io_base, SPCR2, w | (1 << 7));
+	if (idle) {
+		/* Start frame sync */
+		w = OMAP_MCBSP_READ(io_base, SPCR2);
+		OMAP_MCBSP_WRITE(io_base, SPCR2, w | (1 << 7));
+	}
 
 	/* Dump McBSP Regs */
 	omap_mcbsp_dump_reg(id);
 }
 EXPORT_SYMBOL(omap_mcbsp_start);
 
-void omap_mcbsp_stop(unsigned int id)
+void omap_mcbsp_stop(unsigned int id, int tx, int rx)
 {
 	struct omap_mcbsp *mcbsp;
 	void __iomem *io_base;
+	int idle;
 	u16 w;
 
 	if (!omap_mcbsp_check_valid_id(id)) {
@@ -386,15 +395,20 @@ void omap_mcbsp_stop(unsigned int id)
 
 	/* Reset transmitter */
 	w = OMAP_MCBSP_READ(io_base, SPCR2);
-	OMAP_MCBSP_WRITE(io_base, SPCR2, w & ~(1));
+	OMAP_MCBSP_WRITE(io_base, SPCR2, w & ~(tx & 1));
 
 	/* Reset receiver */
 	w = OMAP_MCBSP_READ(io_base, SPCR1);
-	OMAP_MCBSP_WRITE(io_base, SPCR1, w & ~(1));
+	OMAP_MCBSP_WRITE(io_base, SPCR1, w & ~(rx & 1));
 
-	/* Reset the sample rate generator */
-	w = OMAP_MCBSP_READ(io_base, SPCR2);
-	OMAP_MCBSP_WRITE(io_base, SPCR2, w & ~(1 << 6));
+	idle = !((OMAP_MCBSP_READ(io_base, SPCR2) |
+		  OMAP_MCBSP_READ(io_base, SPCR1)) & 1);
+
+	if (idle) {
+		/* Reset the sample rate generator */
+		w = OMAP_MCBSP_READ(io_base, SPCR2);
+		OMAP_MCBSP_WRITE(io_base, SPCR2, w & ~(1 << 6));
+	}
 }
 EXPORT_SYMBOL(omap_mcbsp_stop);
 
-- 
cgit v1.2.3


From 8db5d1a64d36d0750b88c6c13feeaf0e00be2eb4 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Mon, 25 May 2009 12:21:38 +0200
Subject: MXC: pass base/irq to mxc_timer_init

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx1/clock.c               |  2 +-
 arch/arm/mach-mx2/clock_imx21.c         |  2 +-
 arch/arm/mach-mx2/clock_imx27.c         |  2 +-
 arch/arm/mach-mx3/clock-imx35.c         |  2 +-
 arch/arm/mach-mx3/clock.c               |  3 ++-
 arch/arm/plat-mxc/include/mach/common.h |  2 +-
 arch/arm/plat-mxc/time.c                | 21 ++-------------------
 7 files changed, 9 insertions(+), 25 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-mx1/clock.c b/arch/arm/mach-mx1/clock.c
index 0d0f306851d..7b739dd8700 100644
--- a/arch/arm/mach-mx1/clock.c
+++ b/arch/arm/mach-mx1/clock.c
@@ -626,7 +626,7 @@ int __init mx1_clocks_init(unsigned long fref)
 	clk_enable(&hclk);
 	clk_enable(&fclk);
 
-	mxc_timer_init(&gpt_clk);
+	mxc_timer_init(&gpt_clk, IO_ADDRESS(TIM1_BASE_ADDR), TIM1_INT);
 
 	return 0;
 }
diff --git a/arch/arm/mach-mx2/clock_imx21.c b/arch/arm/mach-mx2/clock_imx21.c
index 0850fb88ec1..eede79855f4 100644
--- a/arch/arm/mach-mx2/clock_imx21.c
+++ b/arch/arm/mach-mx2/clock_imx21.c
@@ -1004,6 +1004,6 @@ int __init mx21_clocks_init(unsigned long lref, unsigned long href)
 	clk_enable(&uart_clk[0]);
 #endif
 
-	mxc_timer_init(&gpt_clk[0]);
+	mxc_timer_init(&gpt_clk[0], IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT1);
 	return 0;
 }
diff --git a/arch/arm/mach-mx2/clock_imx27.c b/arch/arm/mach-mx2/clock_imx27.c
index 2c971442f3f..a0c577f80d4 100644
--- a/arch/arm/mach-mx2/clock_imx27.c
+++ b/arch/arm/mach-mx2/clock_imx27.c
@@ -748,7 +748,7 @@ int __init mx27_clocks_init(unsigned long fref)
 	clk_enable(&uart1_clk);
 #endif
 
-	mxc_timer_init(&gpt1_clk);
+	mxc_timer_init(&gpt1_clk, IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT1);
 
 	return 0;
 }
diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c
index 577ee83d1f6..4cf1849f552 100644
--- a/arch/arm/mach-mx3/clock-imx35.c
+++ b/arch/arm/mach-mx3/clock-imx35.c
@@ -456,7 +456,7 @@ int __init mx35_clocks_init()
 	__raw_writel((3 << 26) | ll, CCM_BASE + CCM_CGR2);
 	__raw_writel(0, CCM_BASE + CCM_CGR3);
 
-	mxc_timer_init(&gpt_clk);
+	mxc_timer_init(&ipg_clk, IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT);
 
 	return 0;
 }
diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock.c
index 8b14239724c..25b6f55bfb0 100644
--- a/arch/arm/mach-mx3/clock.c
+++ b/arch/arm/mach-mx3/clock.c
@@ -29,6 +29,7 @@
 
 #include <mach/clock.h>
 #include <mach/hardware.h>
+#include <mach/mx31.h>
 #include <mach/common.h>
 
 #include "crm_regs.h"
@@ -609,7 +610,7 @@ int __init mx31_clocks_init(unsigned long fref)
 		__raw_writel(reg, MXC_CCM_PMCR1);
 	}
 
-	mxc_timer_init(&ipg_clk);
+	mxc_timer_init(&ipg_clk, IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT);
 
 	return 0;
 }
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index 02c3cd004db..1c48aefe4b6 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -20,7 +20,7 @@ extern void mx27_map_io(void);
 extern void mx31_map_io(void);
 extern void mx35_map_io(void);
 extern void mxc_init_irq(void);
-extern void mxc_timer_init(struct clk *timer_clk);
+extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int);
 extern int mx1_clocks_init(unsigned long fref);
 extern int mx21_clocks_init(unsigned long lref, unsigned long fref);
 extern int mx27_clocks_init(unsigned long fref);
diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c
index 88fb3a57e02..7e71bb6270e 100644
--- a/arch/arm/plat-mxc/time.c
+++ b/arch/arm/plat-mxc/time.c
@@ -281,30 +281,13 @@ static int __init mxc_clockevent_init(struct clk *timer_clk)
 	return 0;
 }
 
-void __init mxc_timer_init(struct clk *timer_clk)
+void __init mxc_timer_init(struct clk *timer_clk, void __iomem *base, int irq)
 {
 	uint32_t tctl_val;
-	int irq;
 
 	clk_enable(timer_clk);
 
-	if (cpu_is_mx1()) {
-#ifdef CONFIG_ARCH_MX1
-		timer_base = IO_ADDRESS(TIM1_BASE_ADDR);
-		irq = TIM1_INT;
-#endif
-	} else if (cpu_is_mx2()) {
-#ifdef CONFIG_ARCH_MX2
-		timer_base = IO_ADDRESS(GPT1_BASE_ADDR);
-		irq = MXC_INT_GPT1;
-#endif
-	} else if (cpu_is_mx3()) {
-#ifdef CONFIG_ARCH_MX3
-		timer_base = IO_ADDRESS(GPT1_BASE_ADDR);
-		irq = MXC_INT_GPT;
-#endif
-	} else
-		BUG();
+	timer_base = base;
 
 	/*
 	 * Initialise to a known state (all timers off, and timing reset)
-- 
cgit v1.2.3


From be124c94279edf4306798100f120c386947d8724 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Thu, 4 Jun 2009 12:19:02 +0200
Subject: system.c: runtime base address

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx1/generic.c             |  1 +
 arch/arm/mach-mx2/generic.c             |  2 ++
 arch/arm/mach-mx3/mm.c                  |  2 ++
 arch/arm/plat-mxc/include/mach/common.h |  1 +
 arch/arm/plat-mxc/system.c              | 22 +++++++++++++---------
 5 files changed, 19 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-mx1/generic.c b/arch/arm/mach-mx1/generic.c
index 7622c9b38c9..bbb6c7b8766 100644
--- a/arch/arm/mach-mx1/generic.c
+++ b/arch/arm/mach-mx1/generic.c
@@ -41,6 +41,7 @@ static struct map_desc imx_io_desc[] __initdata = {
 void __init mx1_map_io(void)
 {
 	mxc_set_cpu_type(MXC_CPU_MX1);
+	mxc_arch_reset_init(IO_ADDRESS(WDT_BASE_ADDR));
 
 	iotable_init(imx_io_desc, ARRAY_SIZE(imx_io_desc));
 }
diff --git a/arch/arm/mach-mx2/generic.c b/arch/arm/mach-mx2/generic.c
index 169372f69d8..bdc5a6e67be 100644
--- a/arch/arm/mach-mx2/generic.c
+++ b/arch/arm/mach-mx2/generic.c
@@ -72,6 +72,7 @@ static struct map_desc mxc_io_desc[] __initdata = {
 void __init mx21_map_io(void)
 {
 	mxc_set_cpu_type(MXC_CPU_MX21);
+	mxc_arch_reset_init(IO_ADDRESS(WDOG_BASE_ADDR));
 
 	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
 }
@@ -79,6 +80,7 @@ void __init mx21_map_io(void)
 void __init mx27_map_io(void)
 {
 	mxc_set_cpu_type(MXC_CPU_MX27);
+	mxc_arch_reset_init(IO_ADDRESS(WDOG_BASE_ADDR));
 
 	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
 }
diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c
index 1f5fdd456cb..f0d5ae533b4 100644
--- a/arch/arm/mach-mx3/mm.c
+++ b/arch/arm/mach-mx3/mm.c
@@ -75,6 +75,7 @@ static struct map_desc mxc_io_desc[] __initdata = {
 void __init mx31_map_io(void)
 {
 	mxc_set_cpu_type(MXC_CPU_MX31);
+	mxc_arch_reset_init(IO_ADDRESS(WDOG_BASE_ADDR));
 
 	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
 }
@@ -82,6 +83,7 @@ void __init mx31_map_io(void)
 void __init mx35_map_io(void)
 {
 	mxc_set_cpu_type(MXC_CPU_MX35);
+	mxc_arch_reset_init(IO_ADDRESS(WDOG_BASE_ADDR));
 
 	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
 }
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index 1c48aefe4b6..1dc31d6dd43 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -29,5 +29,6 @@ extern int mx35_clocks_init(void);
 extern int mxc_register_gpios(void);
 extern int mxc_register_device(struct platform_device *pdev, void *data);
 extern void mxc_set_cpu_type(unsigned int type);
+extern void mxc_arch_reset_init(void __iomem *);
 
 #endif
diff --git a/arch/arm/plat-mxc/system.c b/arch/arm/plat-mxc/system.c
index 79c37577c91..15e30532f4a 100644
--- a/arch/arm/plat-mxc/system.c
+++ b/arch/arm/plat-mxc/system.c
@@ -30,29 +30,28 @@
 #include <asm/proc-fns.h>
 #include <asm/system.h>
 
-#ifdef CONFIG_ARCH_MX1
-#define WDOG_WCR_REG		IO_ADDRESS(WDT_BASE_ADDR)
-#define WDOG_WCR_ENABLE		(1 << 0)
-#else
-#define WDOG_WCR_REG		IO_ADDRESS(WDOG_BASE_ADDR)
-#define WDOG_WCR_ENABLE		(1 << 2)
-#endif
+static void __iomem *wdog_base;
 
 /*
  * Reset the system. It is called by machine_restart().
  */
 void arch_reset(char mode, const char *cmd)
 {
-	if (!cpu_is_mx1()) {
+	unsigned int wcr_enable;
+
+	if (cpu_is_mx1()) {
+		wcr_enable = (1 << 0);
+	} else {
 		struct clk *clk;
 
 		clk = clk_get_sys("imx-wdt.0", NULL);
 		if (!IS_ERR(clk))
 			clk_enable(clk);
+		wcr_enable = (1 << 2);
 	}
 
 	/* Assert SRS signal */
-	__raw_writew(WDOG_WCR_ENABLE, WDOG_WCR_REG);
+	__raw_writew(wcr_enable, wdog_base);
 
 	/* wait for reset to assert... */
 	mdelay(500);
@@ -65,3 +64,8 @@ void arch_reset(char mode, const char *cmd)
 	/* we'll take a jump through zero as a poor second */
 	cpu_reset(0);
 }
+
+void mxc_arch_reset_init(void __iomem *base)
+{
+	wdog_base = base;
+}
-- 
cgit v1.2.3


From abae61305684fffb0f1d779a1a678855ec5e8cfc Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Mon, 25 May 2009 17:22:18 +0200
Subject: mxc: remove ARCH_NR_GPIOS

Use the default value of 256 which is enough for all i.MX SoCs.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/include/mach/mx27.h | 3 ---
 arch/arm/plat-mxc/include/mach/mx3x.h | 3 ---
 2 files changed, 6 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-mxc/include/mach/mx27.h b/arch/arm/plat-mxc/include/mach/mx27.h
index 6e93f2c0b7b..063ac352465 100644
--- a/arch/arm/plat-mxc/include/mach/mx27.h
+++ b/arch/arm/plat-mxc/include/mach/mx27.h
@@ -120,7 +120,4 @@ extern int mx27_revision(void);
 
 /* Mandatory defines used globally */
 
-/* this CPU supports up to 192 GPIOs (don't forget the baseboard!) */
-#define ARCH_NR_GPIOS		(192 + 16)
-
 #endif /* __ASM_ARCH_MXC_MX27_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx3x.h b/arch/arm/plat-mxc/include/mach/mx3x.h
index b559a4bb576..44ca1b700f0 100644
--- a/arch/arm/plat-mxc/include/mach/mx3x.h
+++ b/arch/arm/plat-mxc/include/mach/mx3x.h
@@ -279,9 +279,6 @@
 
 /* Mandatory defines used globally */
 
-/* this CPU supports up to 96 GPIOs */
-#define ARCH_NR_GPIOS		96
-
 #if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
 
 extern unsigned int system_rev;
-- 
cgit v1.2.3


From d30c74a02f7652e784c32a10736a3c88db98820c Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Thu, 4 Jun 2009 13:29:57 +0200
Subject: MXC uncompress macros: determine uart base by machine type

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/include/mach/uncompress.h | 60 ++++++++++++++++++++---------
 1 file changed, 42 insertions(+), 18 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h
index de6fe036598..98c8a60214d 100644
--- a/arch/arm/plat-mxc/include/mach/uncompress.h
+++ b/arch/arm/plat-mxc/include/mach/uncompress.h
@@ -26,8 +26,11 @@
 #define __MXC_BOOT_UNCOMPRESS
 
 #include <mach/hardware.h>
+#include <asm/mach-types.h>
 
-#define UART(x) (*(volatile unsigned long *)(serial_port + (x)))
+static unsigned long uart_base;
+
+#define UART(x) (*(volatile unsigned long *)(uart_base + (x)))
 
 #define USR2 0x98
 #define USR2_TXFE (1<<14)
@@ -46,19 +49,10 @@
 
 static void putc(int ch)
 {
-	static unsigned long serial_port = 0;
-
-	if (unlikely(serial_port == 0)) {
-		do {
-			serial_port = UART1_BASE_ADDR;
-			if (UART(UCR1) & UCR1_UARTEN)
-				break;
-			serial_port = UART2_BASE_ADDR;
-			if (UART(UCR1) & UCR1_UARTEN)
-				break;
-			return;
-		} while (0);
-	}
+	if (!uart_base)
+		return;
+	if (!(UART(UCR1) & UCR1_UARTEN))
+		return;
 
 	while (!(UART(USR2) & USR2_TXFE))
 		barrier();
@@ -68,11 +62,41 @@ static void putc(int ch)
 
 #define flush() do { } while (0)
 
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
+#define MX1_UART1_BASE_ADDR	0x00206000
+#define MX2X_UART1_BASE_ADDR	0x1000a000
+#define MX3X_UART1_BASE_ADDR	0x43F90000
+
+static __inline__ void __arch_decomp_setup(unsigned long arch_id)
+{
+	switch (arch_id) {
+	case MACH_TYPE_MX1ADS:
+	case MACH_TYPE_SCB9328:
+		uart_base = MX1_UART1_BASE_ADDR;
+		break;
+	case MACH_TYPE_IMX27LITE:
+	case MACH_TYPE_MX27_3DS:
+	case MACH_TYPE_MX27ADS:
+	case MACH_TYPE_PCM038:
+	case MACH_TYPE_MX21ADS:
+		uart_base = MX2X_UART1_BASE_ADDR;
+		break;
+	case MACH_TYPE_MX31LITE:
+	case MACH_TYPE_ARMADILLO5X0:
+	case MACH_TYPE_MX31MOBOARD:
+	case MACH_TYPE_QONG:
+	case MACH_TYPE_MX31_3DS:
+	case MACH_TYPE_PCM037:
+	case MACH_TYPE_MX31ADS:
+	case MACH_TYPE_MX35_3DS:
+	case MACH_TYPE_PCM043:
+		uart_base = MX3X_UART1_BASE_ADDR;
+		break;
+	default:
+		break;
+	}
+}
 
+#define arch_decomp_setup()	__arch_decomp_setup(arch_id)
 #define arch_decomp_wdog()
 
 #endif				/* __ASM_ARCH_MXC_UNCOMPRESS_H__ */
-- 
cgit v1.2.3


From ccc1a6f8eebf0eb8a5bee16293d1dc9b5eab1be3 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Thu, 4 Jun 2009 13:45:37 +0200
Subject: MXC: remove board specific setup of MXC_LL_UART_[PV]ADDR

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 .../arm/plat-mxc/include/mach/board-armadillo5x0.h |  7 ---
 arch/arm/plat-mxc/include/mach/board-mx21ads.h     |  6 ---
 arch/arm/plat-mxc/include/mach/board-mx27ads.h     |  6 ---
 arch/arm/plat-mxc/include/mach/board-mx27lite.h    |  5 --
 arch/arm/plat-mxc/include/mach/board-mx27pdk.h     |  5 --
 arch/arm/plat-mxc/include/mach/board-mx31ads.h     |  5 --
 arch/arm/plat-mxc/include/mach/board-mx31lilly.h   |  5 --
 arch/arm/plat-mxc/include/mach/board-mx31lite.h    |  3 --
 arch/arm/plat-mxc/include/mach/board-mx31moboard.h |  5 --
 arch/arm/plat-mxc/include/mach/board-mx31pdk.h     |  5 --
 arch/arm/plat-mxc/include/mach/board-mx35pdk.h     |  5 --
 arch/arm/plat-mxc/include/mach/board-pcm037.h      |  5 --
 arch/arm/plat-mxc/include/mach/board-pcm038.h      |  5 --
 arch/arm/plat-mxc/include/mach/board-pcm043.h      |  5 --
 arch/arm/plat-mxc/include/mach/board-qong.h        |  5 --
 arch/arm/plat-mxc/include/mach/debug-macro.S       | 59 ++++++++--------------
 arch/arm/plat-mxc/include/mach/mx1.h               |  4 --
 17 files changed, 21 insertions(+), 119 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-mxc/include/mach/board-armadillo5x0.h b/arch/arm/plat-mxc/include/mach/board-armadillo5x0.h
index 8769e910e55..0376c133c9f 100644
--- a/arch/arm/plat-mxc/include/mach/board-armadillo5x0.h
+++ b/arch/arm/plat-mxc/include/mach/board-armadillo5x0.h
@@ -12,11 +12,4 @@
 #ifndef __ASM_ARCH_MXC_BOARD_ARMADILLO5X0_H__
 #define __ASM_ARCH_MXC_BOARD_ARMADILLO5X0_H__
 
-#include <mach/hardware.h>
-
-/* mandatory for CONFIG_DEBUG_LL */
-
-#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
-
 #endif
diff --git a/arch/arm/plat-mxc/include/mach/board-mx21ads.h b/arch/arm/plat-mxc/include/mach/board-mx21ads.h
index 06701df74c4..0cf4fa29510 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx21ads.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx21ads.h
@@ -14,12 +14,6 @@
 #ifndef __ASM_ARCH_MXC_BOARD_MX21ADS_H__
 #define __ASM_ARCH_MXC_BOARD_MX21ADS_H__
 
-/*
- * MXC UART EVB board level configurations
- */
-#define MXC_LL_UART_PADDR       UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR       AIPI_IO_ADDRESS(UART1_BASE_ADDR)
-
 /*
  * Memory-mapped I/O on MX21ADS base board
  */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx27ads.h b/arch/arm/plat-mxc/include/mach/board-mx27ads.h
index d42f4e6116f..7776d230327 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx27ads.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx27ads.h
@@ -25,12 +25,6 @@
 #define MXC_MAX_BOARD_INTS      (MXC_MAX_EXP_IO_LINES + \
 				MXC_MAX_VIRTUAL_INTS)
 
-/*
- * MXC UART EVB board level configurations
- */
-#define MXC_LL_UART_PADDR       UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR       AIPI_IO_ADDRESS(UART1_BASE_ADDR)
-
 /*
  * @name Memory Size parameters
  */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx27lite.h b/arch/arm/plat-mxc/include/mach/board-mx27lite.h
index a870f8ea244..ea87551d273 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx27lite.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx27lite.h
@@ -11,9 +11,4 @@
 #ifndef __ASM_ARCH_MXC_BOARD_MX27LITE_H__
 #define __ASM_ARCH_MXC_BOARD_MX27LITE_H__
 
-/* mandatory for CONFIG_DEBUG_LL */
-
-#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
-
 #endif /* __ASM_ARCH_MXC_BOARD_MX27LITE_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx27pdk.h b/arch/arm/plat-mxc/include/mach/board-mx27pdk.h
index 552b55d714d..fec1bcfa916 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx27pdk.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx27pdk.h
@@ -11,9 +11,4 @@
 #ifndef __ASM_ARCH_MXC_BOARD_MX27PDK_H__
 #define __ASM_ARCH_MXC_BOARD_MX27PDK_H__
 
-/* mandatory for CONFIG_DEBUG_LL */
-
-#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
-
 #endif /* __ASM_ARCH_MXC_BOARD_MX27PDK_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31ads.h b/arch/arm/plat-mxc/include/mach/board-mx31ads.h
index 06e6895f7f6..2cbfa35e82f 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31ads.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31ads.h
@@ -114,9 +114,4 @@
 
 #define MXC_MAX_EXP_IO_LINES	16
 
-/* mandatory for CONFIG_DEBUG_LL */
-
-#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
-
 #endif /* __ASM_ARCH_MXC_BOARD_MX31ADS_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31lilly.h b/arch/arm/plat-mxc/include/mach/board-mx31lilly.h
index 78cf31e22e4..eb5a5024622 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31lilly.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31lilly.h
@@ -22,11 +22,6 @@
 #ifndef __ASM_ARCH_MXC_BOARD_MX31LILLY_H__
 #define __ASM_ARCH_MXC_BOARD_MX31LILLY_H__
 
-/* mandatory for CONFIG_LL_DEBUG */
-
-#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR	(AIPI_BASE_ADDR_VIRT + 0x0A000)
-
 #ifndef __ASSEMBLY__
 
 enum mx31lilly_boards {
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31lite.h b/arch/arm/plat-mxc/include/mach/board-mx31lite.h
index 52fbdf2d6f2..8e64325d690 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31lite.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31lite.h
@@ -11,8 +11,5 @@
 #ifndef __ASM_ARCH_MXC_BOARD_MX31LITE_H__
 #define __ASM_ARCH_MXC_BOARD_MX31LITE_H__
 
-#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
-
 #endif /* __ASM_ARCH_MXC_BOARD_MX31LITE_H__ */
 
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31moboard.h b/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
index 303fd2434a2..d5be6b5a6ac 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31moboard.h
@@ -19,11 +19,6 @@
 #ifndef __ASM_ARCH_MXC_BOARD_MX31MOBOARD_H__
 #define __ASM_ARCH_MXC_BOARD_MX31MOBOARD_H__
 
-/* mandatory for CONFIG_DEBUG_LL */
-
-#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR	(AIPI_BASE_ADDR_VIRT + 0x0A000)
-
 #ifndef __ASSEMBLY__
 
 enum mx31moboard_boards {
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31pdk.h b/arch/arm/plat-mxc/include/mach/board-mx31pdk.h
index 519bab3eb28..2bbd6ed17f5 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31pdk.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31pdk.h
@@ -11,11 +11,6 @@
 #ifndef __ASM_ARCH_MXC_BOARD_MX31PDK_H__
 #define __ASM_ARCH_MXC_BOARD_MX31PDK_H__
 
-/* mandatory for CONFIG_DEBUG_LL */
-
-#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
-
 /* Definitions for components on the Debug board */
 
 /* Base address of CPLD controller on the Debug board */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx35pdk.h b/arch/arm/plat-mxc/include/mach/board-mx35pdk.h
index 1111037d6d9..383f1c04df0 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx35pdk.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx35pdk.h
@@ -19,9 +19,4 @@
 #ifndef __ASM_ARCH_MXC_BOARD_MX35PDK_H__
 #define __ASM_ARCH_MXC_BOARD_MX35PDK_H__
 
-/* mandatory for CONFIG_DEBUG_LL */
-
-#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
-
 #endif /* __ASM_ARCH_MXC_BOARD_MX35PDK_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-pcm037.h b/arch/arm/plat-mxc/include/mach/board-pcm037.h
index f0a1fa1938a..13411709b13 100644
--- a/arch/arm/plat-mxc/include/mach/board-pcm037.h
+++ b/arch/arm/plat-mxc/include/mach/board-pcm037.h
@@ -19,9 +19,4 @@
 #ifndef __ASM_ARCH_MXC_BOARD_PCM037_H__
 #define __ASM_ARCH_MXC_BOARD_PCM037_H__
 
-/* mandatory for CONFIG_DEBUG_LL */
-
-#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
-
 #endif /* __ASM_ARCH_MXC_BOARD_PCM037_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-pcm038.h b/arch/arm/plat-mxc/include/mach/board-pcm038.h
index 4fcd7499e09..410f9786ed2 100644
--- a/arch/arm/plat-mxc/include/mach/board-pcm038.h
+++ b/arch/arm/plat-mxc/include/mach/board-pcm038.h
@@ -19,11 +19,6 @@
 #ifndef __ASM_ARCH_MXC_BOARD_PCM038_H__
 #define __ASM_ARCH_MXC_BOARD_PCM038_H__
 
-/* mandatory for CONFIG_DEBUG_LL */
-
-#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR	(AIPI_BASE_ADDR_VIRT + 0x0A000)
-
 #ifndef __ASSEMBLY__
 /*
  * This CPU module needs a baseboard to work. After basic initializing
diff --git a/arch/arm/plat-mxc/include/mach/board-pcm043.h b/arch/arm/plat-mxc/include/mach/board-pcm043.h
index 15fbdf16abc..1ac4e1682e5 100644
--- a/arch/arm/plat-mxc/include/mach/board-pcm043.h
+++ b/arch/arm/plat-mxc/include/mach/board-pcm043.h
@@ -19,9 +19,4 @@
 #ifndef __ASM_ARCH_MXC_BOARD_PCM043_H__
 #define __ASM_ARCH_MXC_BOARD_PCM043_H__
 
-/* mandatory for CONFIG_LL_DEBUG */
-
-#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
-
 #endif /* __ASM_ARCH_MXC_BOARD_PCM043_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-qong.h b/arch/arm/plat-mxc/include/mach/board-qong.h
index 04033ec637d..6d88c7af4b2 100644
--- a/arch/arm/plat-mxc/include/mach/board-qong.h
+++ b/arch/arm/plat-mxc/include/mach/board-qong.h
@@ -11,11 +11,6 @@
 #ifndef __ASM_ARCH_MXC_BOARD_QONG_H__
 #define __ASM_ARCH_MXC_BOARD_QONG_H__
 
-/* mandatory for CONFIG_DEBUG_LL */
-
-#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
-
 /* NOR FLASH */
 #define QONG_NOR_SIZE		(128*1024*1024)
 
diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S
index bbc5f6753cf..4f85acd74af 100644
--- a/arch/arm/plat-mxc/include/mach/debug-macro.S
+++ b/arch/arm/plat-mxc/include/mach/debug-macro.S
@@ -11,52 +11,35 @@
  *
  */
 
-#include <mach/hardware.h>
-
-#ifdef CONFIG_MACH_MX31ADS
-#include <mach/board-mx31ads.h>
-#endif
-#ifdef CONFIG_MACH_PCM037
-#include <mach/board-pcm037.h>
-#endif
-#ifdef CONFIG_MACH_MX31LITE
-#include <mach/board-mx31lite.h>
-#endif
-#ifdef CONFIG_MACH_MX27ADS
-#include <mach/board-mx27ads.h>
-#endif
-#ifdef CONFIG_MACH_MX21ADS
-#include <mach/board-mx21ads.h>
-#endif
-#ifdef CONFIG_MACH_PCM038
-#include <mach/board-pcm038.h>
+#ifdef CONFIG_ARCH_MX1
+#include <mach/mx1.h>
+#define UART_PADDR	UART1_BASE_ADDR
+#define UART_VADDR	IO_ADDRESS(UART1_BASE_ADDR)
 #endif
-#ifdef CONFIG_MACH_MX31_3DS
-#include <mach/board-mx31pdk.h>
-#endif
-#ifdef CONFIG_MACH_QONG
-#include <mach/board-qong.h>
-#endif
-#ifdef CONFIG_MACH_PCM043
-#include <mach/board-pcm043.h>
-#endif
-#ifdef CONFIG_MACH_MX27_3DS
-#include <mach/board-mx27pdk.h>
+
+#ifdef CONFIG_ARCH_MX2
+#ifdef UART_PADDR
+#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
 #endif
-#ifdef CONFIG_MACH_ARMADILLO5X0
-#include <mach/board-armadillo5x0.h>
+#include <mach/mx2x.h>
+#define UART_PADDR	UART1_BASE_ADDR
+#define UART_VADDR	AIPI_IO_ADDRESS(UART1_BASE_ADDR)
 #endif
-#ifdef CONFIG_MACH_MX35_3DS
-#include <mach/board-mx35pdk.h>
+
+#ifdef CONFIG_ARCH_MX3
+#ifdef UART_PADDR
+#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
 #endif
-#ifdef CONFIG_MACH_MX27LITE
-#include <mach/board-mx27lite.h>
+#include <mach/mx3x.h>
+#define UART_PADDR	UART1_BASE_ADDR
+#define UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
 #endif
+
 		.macro	addruart,rx
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
-		ldreq	\rx, =MXC_LL_UART_PADDR	@ physical
-		ldrne	\rx, =MXC_LL_UART_VADDR	@ virtual
+		ldreq	\rx, =UART_PADDR	@ physical
+		ldrne	\rx, =UART_VADDR	@ virtual
 		.endm
 
 		.macro	senduart,rd,rx
diff --git a/arch/arm/plat-mxc/include/mach/mx1.h b/arch/arm/plat-mxc/include/mach/mx1.h
index 1000bf330bc..786836965cf 100644
--- a/arch/arm/plat-mxc/include/mach/mx1.h
+++ b/arch/arm/plat-mxc/include/mach/mx1.h
@@ -179,8 +179,4 @@
 #define DMA_REQ_UART1_T		30
 #define DMA_REQ_UART1_R		31
 
-/* mandatory for CONFIG_DEBUG_LL */
-#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
-#define MXC_LL_UART_VADDR	IO_ADDRESS(UART1_BASE_ADDR)
-
 #endif /*  __ASM_ARCH_MXC_MX1_H__ */
-- 
cgit v1.2.3


From 12308dfe3776ff5741fc675f2a352165e1628098 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Wed, 27 May 2009 18:33:58 +0200
Subject: mxc: remove do not include directly

Everyone should be free to include the files he actually needs.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/include/mach/mx1.h  | 4 ----
 arch/arm/plat-mxc/include/mach/mx21.h | 5 -----
 arch/arm/plat-mxc/include/mach/mx27.h | 4 ----
 arch/arm/plat-mxc/include/mach/mx2x.h | 4 ----
 arch/arm/plat-mxc/include/mach/mx3x.h | 4 ----
 5 files changed, 21 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-mxc/include/mach/mx1.h b/arch/arm/plat-mxc/include/mach/mx1.h
index 786836965cf..ee60d64728c 100644
--- a/arch/arm/plat-mxc/include/mach/mx1.h
+++ b/arch/arm/plat-mxc/include/mach/mx1.h
@@ -12,10 +12,6 @@
 #ifndef __ASM_ARCH_MXC_MX1_H__
 #define __ASM_ARCH_MXC_MX1_H__
 
-#ifndef __ASM_ARCH_MXC_HARDWARE_H__
-#error "Do not include directly."
-#endif
-
 #include <mach/vmalloc.h>
 
 /*
diff --git a/arch/arm/plat-mxc/include/mach/mx21.h b/arch/arm/plat-mxc/include/mach/mx21.h
index 8b070a041a9..21112c695ec 100644
--- a/arch/arm/plat-mxc/include/mach/mx21.h
+++ b/arch/arm/plat-mxc/include/mach/mx21.h
@@ -25,11 +25,6 @@
 #ifndef __ASM_ARCH_MXC_MX21_H__
 #define __ASM_ARCH_MXC_MX21_H__
 
-#ifndef __ASM_ARCH_MXC_HARDWARE_H__
-#error "Do not include directly."
-#endif
-
-
 /* Memory regions and CS */
 #define SDRAM_BASE_ADDR         0xC0000000
 #define CSD1_BASE_ADDR          0xC4000000
diff --git a/arch/arm/plat-mxc/include/mach/mx27.h b/arch/arm/plat-mxc/include/mach/mx27.h
index 063ac352465..dc3ad9aa952 100644
--- a/arch/arm/plat-mxc/include/mach/mx27.h
+++ b/arch/arm/plat-mxc/include/mach/mx27.h
@@ -24,10 +24,6 @@
 #ifndef __ASM_ARCH_MXC_MX27_H__
 #define __ASM_ARCH_MXC_MX27_H__
 
-#ifndef __ASM_ARCH_MXC_HARDWARE_H__
-#error "Do not include directly."
-#endif
-
 /* IRAM */
 #define IRAM_BASE_ADDR          0xFFFF4C00	/* internal ram */
 
diff --git a/arch/arm/plat-mxc/include/mach/mx2x.h b/arch/arm/plat-mxc/include/mach/mx2x.h
index fc40d3ab8c5..5982ae5a00d 100644
--- a/arch/arm/plat-mxc/include/mach/mx2x.h
+++ b/arch/arm/plat-mxc/include/mach/mx2x.h
@@ -23,10 +23,6 @@
 #ifndef __ASM_ARCH_MXC_MX2x_H__
 #define __ASM_ARCH_MXC_MX2x_H__
 
-#ifndef __ASM_ARCH_MXC_HARDWARE_H__
-#error "Do not include directly."
-#endif
-
 /* The following addresses are common between i.MX21 and i.MX27 */
 
 /* Register offests */
diff --git a/arch/arm/plat-mxc/include/mach/mx3x.h b/arch/arm/plat-mxc/include/mach/mx3x.h
index 44ca1b700f0..16f68e8f4cf 100644
--- a/arch/arm/plat-mxc/include/mach/mx3x.h
+++ b/arch/arm/plat-mxc/include/mach/mx3x.h
@@ -11,10 +11,6 @@
 #ifndef __ASM_ARCH_MXC_MX31_H__
 #define __ASM_ARCH_MXC_MX31_H__
 
-#ifndef __ASM_ARCH_MXC_HARDWARE_H__
-#error "Do not include directly."
-#endif
-
 /*
  * MX31 memory map:
  *
-- 
cgit v1.2.3


From c5aa0ad0c557c63dcaf8c8d75a3dd4c5e90724b3 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Mon, 25 May 2009 17:36:19 +0200
Subject: mxc: turn to soc specific init_irq functions

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx1/generic.c             |  6 ++++++
 arch/arm/mach-mx1/mx1ads.c              |  4 ++--
 arch/arm/mach-mx1/scb9328.c             |  2 +-
 arch/arm/mach-mx2/generic.c             | 10 ++++++++++
 arch/arm/mach-mx2/mx21ads.c             |  2 +-
 arch/arm/mach-mx2/mx27ads.c             |  2 +-
 arch/arm/mach-mx2/mx27lite.c            |  2 +-
 arch/arm/mach-mx2/mx27pdk.c             |  2 +-
 arch/arm/mach-mx2/pcm038.c              |  2 +-
 arch/arm/mach-mx3/armadillo5x0.c        |  2 +-
 arch/arm/mach-mx3/mm.c                  | 10 ++++++++++
 arch/arm/mach-mx3/mx31ads.c             |  2 +-
 arch/arm/mach-mx3/mx31lilly.c           |  2 +-
 arch/arm/mach-mx3/mx31lite.c            |  2 +-
 arch/arm/mach-mx3/mx31moboard.c         |  3 ++-
 arch/arm/mach-mx3/mx31pdk.c             |  2 +-
 arch/arm/mach-mx3/mx35pdk.c             |  2 +-
 arch/arm/mach-mx3/pcm037.c              |  2 +-
 arch/arm/mach-mx3/pcm043.c              |  2 +-
 arch/arm/mach-mx3/qong.c                |  2 +-
 arch/arm/plat-mxc/include/mach/common.h |  7 ++++++-
 arch/arm/plat-mxc/irq.c                 |  4 ++--
 22 files changed, 53 insertions(+), 21 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-mx1/generic.c b/arch/arm/mach-mx1/generic.c
index bbb6c7b8766..7f9fc1034c0 100644
--- a/arch/arm/mach-mx1/generic.c
+++ b/arch/arm/mach-mx1/generic.c
@@ -45,3 +45,9 @@ void __init mx1_map_io(void)
 
 	iotable_init(imx_io_desc, ARRAY_SIZE(imx_io_desc));
 }
+
+void __init mx1_init_irq(void)
+{
+	mxc_init_irq(IO_ADDRESS(AVIC_BASE_ADDR));
+}
+
diff --git a/arch/arm/mach-mx1/mx1ads.c b/arch/arm/mach-mx1/mx1ads.c
index e5b0c0a83c3..6af064d19b0 100644
--- a/arch/arm/mach-mx1/mx1ads.c
+++ b/arch/arm/mach-mx1/mx1ads.c
@@ -151,7 +151,7 @@ MACHINE_START(MX1ADS, "Freescale MX1ADS")
 	.io_pg_offst	= (IMX_IO_BASE >> 18) & 0xfffc,
 	.boot_params	= PHYS_OFFSET + 0x100,
 	.map_io		= mx1_map_io,
-	.init_irq	= mxc_init_irq,
+	.init_irq	= mx1_init_irq,
 	.timer		= &mx1ads_timer,
 	.init_machine	= mx1ads_init,
 MACHINE_END
@@ -161,7 +161,7 @@ MACHINE_START(MXLADS, "Freescale MXLADS")
 	.io_pg_offst	= (IMX_IO_BASE >> 18) & 0xfffc,
 	.boot_params	= PHYS_OFFSET + 0x100,
 	.map_io		= mx1_map_io,
-	.init_irq	= mxc_init_irq,
+	.init_irq	= mx1_init_irq,
 	.timer		= &mx1ads_timer,
 	.init_machine	= mx1ads_init,
 MACHINE_END
diff --git a/arch/arm/mach-mx1/scb9328.c b/arch/arm/mach-mx1/scb9328.c
index 20e0b5bcdff..125d495e9c7 100644
--- a/arch/arm/mach-mx1/scb9328.c
+++ b/arch/arm/mach-mx1/scb9328.c
@@ -154,7 +154,7 @@ MACHINE_START(SCB9328, "Synertronixx scb9328")
 	.io_pg_offst	= ((0xe0200000) >> 18) & 0xfffc,
 	.boot_params	= 0x08000100,
 	.map_io		= mx1_map_io,
-	.init_irq	= mxc_init_irq,
+	.init_irq	= mx1_init_irq,
 	.timer		= &scb9328_timer,
 	.init_machine	= scb9328_init,
 MACHINE_END
diff --git a/arch/arm/mach-mx2/generic.c b/arch/arm/mach-mx2/generic.c
index bdc5a6e67be..ae8f759134d 100644
--- a/arch/arm/mach-mx2/generic.c
+++ b/arch/arm/mach-mx2/generic.c
@@ -85,3 +85,13 @@ void __init mx27_map_io(void)
 	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
 }
 
+void __init mx27_init_irq(void)
+{
+	mxc_init_irq(IO_ADDRESS(AVIC_BASE_ADDR));
+}
+
+void __init mx21_init_irq(void)
+{
+	mx27_init_irq();
+}
+
diff --git a/arch/arm/mach-mx2/mx21ads.c b/arch/arm/mach-mx2/mx21ads.c
index a5ee461cb40..a525783ceea 100644
--- a/arch/arm/mach-mx2/mx21ads.c
+++ b/arch/arm/mach-mx2/mx21ads.c
@@ -280,7 +280,7 @@ MACHINE_START(MX21ADS, "Freescale i.MX21ADS")
 	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx21ads_map_io,
-	.init_irq       = mxc_init_irq,
+	.init_irq       = mx21_init_irq,
 	.init_machine   = mx21ads_board_init,
 	.timer          = &mx21ads_timer,
 MACHINE_END
diff --git a/arch/arm/mach-mx2/mx27ads.c b/arch/arm/mach-mx2/mx27ads.c
index 02daddac699..a9f69eb58b7 100644
--- a/arch/arm/mach-mx2/mx27ads.c
+++ b/arch/arm/mach-mx2/mx27ads.c
@@ -330,7 +330,7 @@ MACHINE_START(MX27ADS, "Freescale i.MX27ADS")
 	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx27ads_map_io,
-	.init_irq       = mxc_init_irq,
+	.init_irq       = mx27_init_irq,
 	.init_machine   = mx27ads_board_init,
 	.timer          = &mx27ads_timer,
 MACHINE_END
diff --git a/arch/arm/mach-mx2/mx27lite.c b/arch/arm/mach-mx2/mx27lite.c
index 3ae11cb8c04..82ea227ea0c 100644
--- a/arch/arm/mach-mx2/mx27lite.c
+++ b/arch/arm/mach-mx2/mx27lite.c
@@ -89,7 +89,7 @@ MACHINE_START(IMX27LITE, "LogicPD i.MX27LITE")
 	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx27_map_io,
-	.init_irq       = mxc_init_irq,
+	.init_irq       = mx27_init_irq,
 	.init_machine   = mx27lite_init,
 	.timer          = &mx27lite_timer,
 MACHINE_END
diff --git a/arch/arm/mach-mx2/mx27pdk.c b/arch/arm/mach-mx2/mx27pdk.c
index 1d9238c7a6c..6761d1b79e4 100644
--- a/arch/arm/mach-mx2/mx27pdk.c
+++ b/arch/arm/mach-mx2/mx27pdk.c
@@ -89,7 +89,7 @@ MACHINE_START(MX27_3DS, "Freescale MX27PDK")
 	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx27_map_io,
-	.init_irq       = mxc_init_irq,
+	.init_irq       = mx27_init_irq,
 	.init_machine   = mx27pdk_init,
 	.timer          = &mx27pdk_timer,
 MACHINE_END
diff --git a/arch/arm/mach-mx2/pcm038.c b/arch/arm/mach-mx2/pcm038.c
index a4628d00434..638d078304c 100644
--- a/arch/arm/mach-mx2/pcm038.c
+++ b/arch/arm/mach-mx2/pcm038.c
@@ -241,7 +241,7 @@ MACHINE_START(PCM038, "phyCORE-i.MX27")
 	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx27_map_io,
-	.init_irq       = mxc_init_irq,
+	.init_irq       = mx27_init_irq,
 	.init_machine   = pcm038_init,
 	.timer          = &pcm038_timer,
 MACHINE_END
diff --git a/arch/arm/mach-mx3/armadillo5x0.c b/arch/arm/mach-mx3/armadillo5x0.c
index ee331fd6b1b..776c0ee1b3c 100644
--- a/arch/arm/mach-mx3/armadillo5x0.c
+++ b/arch/arm/mach-mx3/armadillo5x0.c
@@ -352,7 +352,7 @@ MACHINE_START(ARMADILLO5X0, "Armadillo-500")
 	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params	= PHYS_OFFSET + 0x00000100,
 	.map_io		= mx31_map_io,
-	.init_irq	= mxc_init_irq,
+	.init_irq	= mx31_init_irq,
 	.timer		= &armadillo5x0_timer,
 	.init_machine	= armadillo5x0_init,
 MACHINE_END
diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c
index f0d5ae533b4..c327172159c 100644
--- a/arch/arm/mach-mx3/mm.c
+++ b/arch/arm/mach-mx3/mm.c
@@ -88,6 +88,16 @@ void __init mx35_map_io(void)
 	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
 }
 
+void __init mx31_init_irq(void)
+{
+	mxc_init_irq(IO_ADDRESS(AVIC_BASE_ADDR));
+}
+
+void __init mx35_init_irq(void)
+{
+	mx31_init_irq();
+}
+
 #ifdef CONFIG_CACHE_L2X0
 static int mxc_init_l2x0(void)
 {
diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mx31ads.c
index 30e2767a78a..0497c152be1 100644
--- a/arch/arm/mach-mx3/mx31ads.c
+++ b/arch/arm/mach-mx3/mx31ads.c
@@ -517,7 +517,7 @@ static void __init mx31ads_map_io(void)
 
 static void __init mx31ads_init_irq(void)
 {
-	mxc_init_irq();
+	mx31_init_irq();
 	mx31ads_init_expio();
 }
 
diff --git a/arch/arm/mach-mx3/mx31lilly.c b/arch/arm/mach-mx3/mx31lilly.c
index 6ab2f163cb9..423025150f6 100644
--- a/arch/arm/mach-mx3/mx31lilly.c
+++ b/arch/arm/mach-mx3/mx31lilly.c
@@ -148,7 +148,7 @@ MACHINE_START(LILLY1131, "INCO startec LILLY-1131")
 	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params	= PHYS_OFFSET + 0x100,
 	.map_io		= mx31_map_io,
-	.init_irq	= mxc_init_irq,
+	.init_irq	= mx31_init_irq,
 	.init_machine	= mx31lilly_board_init,
 	.timer		= &mx31lilly_timer,
 MACHINE_END
diff --git a/arch/arm/mach-mx3/mx31lite.c b/arch/arm/mach-mx3/mx31lite.c
index 86fe70fa3e1..b1c0afc40cf 100644
--- a/arch/arm/mach-mx3/mx31lite.c
+++ b/arch/arm/mach-mx3/mx31lite.c
@@ -162,7 +162,7 @@ MACHINE_START(MX31LITE, "LogicPD MX31 LITEKIT")
 	.io_pg_offst    = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx31lite_map_io,
-	.init_irq       = mxc_init_irq,
+	.init_irq       = mx31_init_irq,
 	.init_machine   = mxc_board_init,
 	.timer          = &mx31lite_timer,
 MACHINE_END
diff --git a/arch/arm/mach-mx3/mx31moboard.c b/arch/arm/mach-mx3/mx31moboard.c
index a17f2e41160..b86b8a757c9 100644
--- a/arch/arm/mach-mx3/mx31moboard.c
+++ b/arch/arm/mach-mx3/mx31moboard.c
@@ -36,6 +36,7 @@
 #include <mach/iomux-mx3.h>
 #include <mach/i2c.h>
 #include <mach/mmc.h>
+#include <mach/mx31.h>
 
 #include "devices.h"
 
@@ -197,7 +198,7 @@ MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard")
 	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx31_map_io,
-	.init_irq       = mxc_init_irq,
+	.init_irq       = mx31_init_irq,
 	.init_machine   = mxc_board_init,
 	.timer          = &mx31moboard_timer,
 MACHINE_END
diff --git a/arch/arm/mach-mx3/mx31pdk.c b/arch/arm/mach-mx3/mx31pdk.c
index c19838d2e36..0f7a2f06bc2 100644
--- a/arch/arm/mach-mx3/mx31pdk.c
+++ b/arch/arm/mach-mx3/mx31pdk.c
@@ -265,7 +265,7 @@ MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)")
 	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx31pdk_map_io,
-	.init_irq       = mxc_init_irq,
+	.init_irq       = mx31_init_irq,
 	.init_machine   = mxc_board_init,
 	.timer          = &mx31pdk_timer,
 MACHINE_END
diff --git a/arch/arm/mach-mx3/mx35pdk.c b/arch/arm/mach-mx3/mx35pdk.c
index 6d15374414b..6ff186e46ce 100644
--- a/arch/arm/mach-mx3/mx35pdk.c
+++ b/arch/arm/mach-mx3/mx35pdk.c
@@ -98,7 +98,7 @@ MACHINE_START(MX35_3DS, "Freescale MX35PDK")
 	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx35_map_io,
-	.init_irq       = mxc_init_irq,
+	.init_irq       = mx35_init_irq,
 	.init_machine   = mxc_board_init,
 	.timer          = &mx35pdk_timer,
 MACHINE_END
diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c
index 840cfda341d..d8472206de9 100644
--- a/arch/arm/mach-mx3/pcm037.c
+++ b/arch/arm/mach-mx3/pcm037.c
@@ -592,7 +592,7 @@ MACHINE_START(PCM037, "Phytec Phycore pcm037")
 	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx31_map_io,
-	.init_irq       = mxc_init_irq,
+	.init_irq       = mx31_init_irq,
 	.init_machine   = mxc_board_init,
 	.timer          = &pcm037_timer,
 MACHINE_END
diff --git a/arch/arm/mach-mx3/pcm043.c b/arch/arm/mach-mx3/pcm043.c
index 8d27c324abf..7c7d3cc07b8 100644
--- a/arch/arm/mach-mx3/pcm043.c
+++ b/arch/arm/mach-mx3/pcm043.c
@@ -245,7 +245,7 @@ MACHINE_START(PCM043, "Phytec Phycore pcm043")
 	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx35_map_io,
-	.init_irq       = mxc_init_irq,
+	.init_irq       = mx35_init_irq,
 	.init_machine   = mxc_board_init,
 	.timer          = &pcm043_timer,
 MACHINE_END
diff --git a/arch/arm/mach-mx3/qong.c b/arch/arm/mach-mx3/qong.c
index 82b31c4ab11..0bca4d914ab 100644
--- a/arch/arm/mach-mx3/qong.c
+++ b/arch/arm/mach-mx3/qong.c
@@ -280,7 +280,7 @@ MACHINE_START(QONG, "Dave/DENX QongEVB-LITE")
 	.io_pg_offst    = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx31_map_io,
-	.init_irq       = mxc_init_irq,
+	.init_irq       = mx31_init_irq,
 	.init_machine   = mxc_board_init,
 	.timer          = &qong_timer,
 MACHINE_END
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index 1dc31d6dd43..cd8f215c1ad 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -19,7 +19,12 @@ extern void mx21_map_io(void);
 extern void mx27_map_io(void);
 extern void mx31_map_io(void);
 extern void mx35_map_io(void);
-extern void mxc_init_irq(void);
+extern void mxc_init_irq(void __iomem *);
+extern void mx1_init_irq(void);
+extern void mx21_init_irq(void);
+extern void mx27_init_irq(void);
+extern void mx31_init_irq(void);
+extern void mx35_init_irq(void);
 extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int);
 extern int mx1_clocks_init(unsigned long fref);
 extern int mx21_clocks_init(unsigned long lref, unsigned long fref);
diff --git a/arch/arm/plat-mxc/irq.c b/arch/arm/plat-mxc/irq.c
index 8aee76304f8..618a8b24ed1 100644
--- a/arch/arm/plat-mxc/irq.c
+++ b/arch/arm/plat-mxc/irq.c
@@ -113,11 +113,11 @@ static struct irq_chip mxc_avic_chip = {
  * interrupts. It registers the interrupt enable and disable functions
  * to the kernel for each interrupt source.
  */
-void __init mxc_init_irq(void)
+void __init mxc_init_irq(void __iomem *irqbase)
 {
 	int i;
 
-	avic_base = IO_ADDRESS(AVIC_BASE_ADDR);
+	avic_base = irqbase;
 
 	/* put the AVIC into the reset value with
 	 * all interrupts disabled
-- 
cgit v1.2.3


From 997d74b18ae1d0d8f4c4469a5d1ce8d73ca8402c Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Thu, 4 Jun 2009 10:32:08 +0200
Subject: MXC iomux-v3: Fix defines for PAD_CTL registers

The old defines leaked in from an old version of the patch.
Change the defines to match the register layout of the iomuxer.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/include/mach/iomux-v3.h | 30 +++++++++++++-----------------
 1 file changed, 13 insertions(+), 17 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-mxc/include/mach/iomux-v3.h b/arch/arm/plat-mxc/include/mach/iomux-v3.h
index 7cd84547658..cd06df9370c 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-v3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-v3.h
@@ -68,28 +68,24 @@ struct pad_desc {
 /*
  * Use to set PAD control
  */
-#define PAD_CTL_DRIVE_VOLTAGE_3_3_V	0
-#define PAD_CTL_DRIVE_VOLTAGE_1_8_V	1
 
-#define PAD_CTL_NO_HYSTERESIS		0
-#define PAD_CTL_HYSTERESIS		1
+#define PAD_CTL_DVS			(1 << 13)
+#define PAD_CTL_HYS			(1 << 8)
 
-#define PAD_CTL_PULL_DISABLED		0x0
-#define PAD_CTL_PULL_KEEPER		0xa
-#define PAD_CTL_PULL_DOWN_100K		0xc
-#define PAD_CTL_PULL_UP_47K		0xd
-#define PAD_CTL_PULL_UP_100K		0xe
-#define PAD_CTL_PULL_UP_22K		0xf
+#define PAD_CTL_PKE			(1 << 7)
+#define PAD_CTL_PUE			(1 << 6)
+#define PAD_CTL_PUS_100K_DOWN		(0 << 4)
+#define PAD_CTL_PUS_47K_UP		(1 << 4)
+#define PAD_CTL_PUS_100K_UP		(2 << 4)
+#define PAD_CTL_PUS_22K_UP		(3 << 4)
 
-#define PAD_CTL_OUTPUT_CMOS		0
-#define PAD_CTL_OUTPUT_OPEN_DRAIN	1
+#define PAD_CTL_ODE			(1 << 3)
 
-#define PAD_CTL_DRIVE_STRENGTH_NORM	0
-#define PAD_CTL_DRIVE_STRENGTH_HIGH	1
-#define PAD_CTL_DRIVE_STRENGTH_MAX	2
+#define PAD_CTL_DSE_STANDARD		(0 << 1)
+#define PAD_CTL_DSE_HIGH		(1 << 1)
+#define PAD_CTL_DSE_MAX			(2 << 1)
 
-#define PAD_CTL_SLEW_RATE_SLOW		0
-#define PAD_CTL_SLEW_RATE_FAST		1
+#define PAD_CTL_SRE_FAST		(1 << 0)
 
 /*
  * setups a single pad:
-- 
cgit v1.2.3


From aa68c02777702f05ea5f075e3001288c30ffcb1c Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Tue, 23 Jun 2009 11:52:26 +0200
Subject: mx2: remove mxc_irda platform device

Irda support is handled by the normal ims serial driver, so
we do not need this device.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx2/devices.c | 24 ------------------------
 arch/arm/mach-mx2/devices.h |  1 -
 2 files changed, 25 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-mx2/devices.c b/arch/arm/mach-mx2/devices.c
index a0f1b367432..e6f0f4f1558 100644
--- a/arch/arm/mach-mx2/devices.c
+++ b/arch/arm/mach-mx2/devices.c
@@ -39,30 +39,6 @@
 
 #include "devices.h"
 
-/*
- * Resource definition for the MXC IrDA
- */
-static struct resource mxc_irda_resources[] = {
-	[0] = {
-		.start   = UART3_BASE_ADDR,
-		.end     = UART3_BASE_ADDR + SZ_4K - 1,
-		.flags   = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start   = MXC_INT_UART3,
-		.end     = MXC_INT_UART3,
-		.flags   = IORESOURCE_IRQ,
-	},
-};
-
-/* Platform Data for MXC IrDA */
-struct platform_device mxc_irda_device = {
-	.name = "mxc_irda",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(mxc_irda_resources),
-	.resource = mxc_irda_resources,
-};
-
 /*
  * General Purpose Timer
  * - i.MX1: 2 timer (slighly different register handling)
diff --git a/arch/arm/mach-mx2/devices.h b/arch/arm/mach-mx2/devices.h
index 049005bb6aa..c79ba7fed1b 100644
--- a/arch/arm/mach-mx2/devices.h
+++ b/arch/arm/mach-mx2/devices.h
@@ -4,7 +4,6 @@ extern struct platform_device mxc_gpt3;
 extern struct platform_device mxc_gpt4;
 extern struct platform_device mxc_gpt5;
 extern struct platform_device mxc_wdt;
-extern struct platform_device mxc_irda_device;
 extern struct platform_device mxc_uart_device0;
 extern struct platform_device mxc_uart_device1;
 extern struct platform_device mxc_uart_device2;
-- 
cgit v1.2.3


From bf50bcc242db7f8d2fb6bc099c1693149d9fb5d5 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Tue, 23 Jun 2009 12:04:36 +0200
Subject: mx2: Codingstyle: Let the compiler count arrays

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx2/devices.c | 165 ++++++++++++++++++++------------------------
 1 file changed, 73 insertions(+), 92 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-mx2/devices.c b/arch/arm/mach-mx2/devices.c
index e6f0f4f1558..cbf42467466 100644
--- a/arch/arm/mach-mx2/devices.c
+++ b/arch/arm/mach-mx2/devices.c
@@ -41,20 +41,18 @@
 
 /*
  * General Purpose Timer
- * - i.MX1: 2 timer (slighly different register handling)
- * - i.MX21: 3 timer
- * - i.MX27: 6 timer
+ * - i.MX21: 3 timers
+ * - i.MX27: 6 timers
  */
 
 /* We use gpt0 as system timer, so do not add a device for this one */
 
 static struct resource timer1_resources[] = {
-	[0] = {
+	{
 		.start	= GPT2_BASE_ADDR,
 		.end	= GPT2_BASE_ADDR + 0x17,
-		.flags	= IORESOURCE_MEM
-	},
-	[1] = {
+		.flags	= IORESOURCE_MEM,
+	}, {
 		.start   = MXC_INT_GPT2,
 		.end     = MXC_INT_GPT2,
 		.flags   = IORESOURCE_IRQ,
@@ -65,16 +63,15 @@ struct platform_device mxc_gpt1 = {
 	.name = "imx_gpt",
 	.id = 1,
 	.num_resources = ARRAY_SIZE(timer1_resources),
-	.resource = timer1_resources
+	.resource = timer1_resources,
 };
 
 static struct resource timer2_resources[] = {
-	[0] = {
+	{
 		.start	= GPT3_BASE_ADDR,
 		.end	= GPT3_BASE_ADDR + 0x17,
-		.flags	= IORESOURCE_MEM
-	},
-	[1] = {
+		.flags	= IORESOURCE_MEM,
+	}, {
 		.start   = MXC_INT_GPT3,
 		.end     = MXC_INT_GPT3,
 		.flags   = IORESOURCE_IRQ,
@@ -85,17 +82,16 @@ struct platform_device mxc_gpt2 = {
 	.name = "imx_gpt",
 	.id = 2,
 	.num_resources = ARRAY_SIZE(timer2_resources),
-	.resource = timer2_resources
+	.resource = timer2_resources,
 };
 
 #ifdef CONFIG_MACH_MX27
 static struct resource timer3_resources[] = {
-	[0] = {
+	{
 		.start	= GPT4_BASE_ADDR,
 		.end	= GPT4_BASE_ADDR + 0x17,
-		.flags	= IORESOURCE_MEM
-	},
-	[1] = {
+		.flags	= IORESOURCE_MEM,
+	}, {
 		.start   = MXC_INT_GPT4,
 		.end     = MXC_INT_GPT4,
 		.flags   = IORESOURCE_IRQ,
@@ -106,16 +102,15 @@ struct platform_device mxc_gpt3 = {
 	.name = "imx_gpt",
 	.id = 3,
 	.num_resources = ARRAY_SIZE(timer3_resources),
-	.resource = timer3_resources
+	.resource = timer3_resources,
 };
 
 static struct resource timer4_resources[] = {
-	[0] = {
+	{
 		.start	= GPT5_BASE_ADDR,
 		.end	= GPT5_BASE_ADDR + 0x17,
-		.flags	= IORESOURCE_MEM
-	},
-	[1] = {
+		.flags	= IORESOURCE_MEM,
+	}, {
 		.start   = MXC_INT_GPT5,
 		.end     = MXC_INT_GPT5,
 		.flags   = IORESOURCE_IRQ,
@@ -126,16 +121,15 @@ struct platform_device mxc_gpt4 = {
 	.name = "imx_gpt",
 	.id = 4,
 	.num_resources = ARRAY_SIZE(timer4_resources),
-	.resource = timer4_resources
+	.resource = timer4_resources,
 };
 
 static struct resource timer5_resources[] = {
-	[0] = {
+	{
 		.start	= GPT6_BASE_ADDR,
 		.end	= GPT6_BASE_ADDR + 0x17,
-		.flags	= IORESOURCE_MEM
-	},
-	[1] = {
+		.flags	= IORESOURCE_MEM,
+	}, {
 		.start   = MXC_INT_GPT6,
 		.end     = MXC_INT_GPT6,
 		.flags   = IORESOURCE_IRQ,
@@ -146,7 +140,7 @@ struct platform_device mxc_gpt5 = {
 	.name = "imx_gpt",
 	.id = 5,
 	.num_resources = ARRAY_SIZE(timer5_resources),
-	.resource = timer5_resources
+	.resource = timer5_resources,
 };
 #endif
 
@@ -190,11 +184,11 @@ static struct resource mxc_nand_resources[] = {
 	{
 		.start	= NFC_BASE_ADDR,
 		.end	= NFC_BASE_ADDR + 0xfff,
-		.flags	= IORESOURCE_MEM
+		.flags	= IORESOURCE_MEM,
 	}, {
 		.start	= MXC_INT_NANDFC,
 		.end	= MXC_INT_NANDFC,
-		.flags	= IORESOURCE_IRQ
+		.flags	= IORESOURCE_IRQ,
 	},
 };
 
@@ -216,8 +210,7 @@ static struct resource mxc_fb[] = {
 		.start = LCDC_BASE_ADDR,
 		.end   = LCDC_BASE_ADDR + 0xFFF,
 		.flags = IORESOURCE_MEM,
-	},
-	{
+	}, {
 		.start = MXC_INT_LCDC,
 		.end   = MXC_INT_LCDC,
 		.flags = IORESOURCE_IRQ,
@@ -240,11 +233,11 @@ static struct resource mxc_fec_resources[] = {
 	{
 		.start	= FEC_BASE_ADDR,
 		.end	= FEC_BASE_ADDR + 0xfff,
-		.flags	= IORESOURCE_MEM
+		.flags	= IORESOURCE_MEM,
 	}, {
 		.start	= MXC_INT_FEC,
 		.end	= MXC_INT_FEC,
-		.flags	= IORESOURCE_IRQ
+		.flags	= IORESOURCE_IRQ,
 	},
 };
 
@@ -257,15 +250,14 @@ struct platform_device mxc_fec_device = {
 #endif
 
 static struct resource mxc_i2c_1_resources[] = {
-	[0] = {
+	{
 		.start	= I2C_BASE_ADDR,
 		.end	= I2C_BASE_ADDR + 0x0fff,
-		.flags	= IORESOURCE_MEM
-	},
-	[1] = {
+		.flags	= IORESOURCE_MEM,
+	}, {
 		.start	= MXC_INT_I2C,
 		.end	= MXC_INT_I2C,
-		.flags	= IORESOURCE_IRQ
+		.flags	= IORESOURCE_IRQ,
 	}
 };
 
@@ -273,20 +265,19 @@ struct platform_device mxc_i2c_device0 = {
 	.name = "imx-i2c",
 	.id = 0,
 	.num_resources = ARRAY_SIZE(mxc_i2c_1_resources),
-	.resource = mxc_i2c_1_resources
+	.resource = mxc_i2c_1_resources,
 };
 
 #ifdef CONFIG_MACH_MX27
 static struct resource mxc_i2c_2_resources[] = {
-	[0] = {
+	{
 		.start	= I2C2_BASE_ADDR,
 		.end	= I2C2_BASE_ADDR + 0x0fff,
-		.flags	= IORESOURCE_MEM
-	},
-	[1] = {
+		.flags	= IORESOURCE_MEM,
+	}, {
 		.start	= MXC_INT_I2C2,
 		.end	= MXC_INT_I2C2,
-		.flags	= IORESOURCE_IRQ
+		.flags	= IORESOURCE_IRQ,
 	}
 };
 
@@ -294,17 +285,16 @@ struct platform_device mxc_i2c_device1 = {
 	.name = "imx-i2c",
 	.id = 1,
 	.num_resources = ARRAY_SIZE(mxc_i2c_2_resources),
-	.resource = mxc_i2c_2_resources
+	.resource = mxc_i2c_2_resources,
 };
 #endif
 
 static struct resource mxc_pwm_resources[] = {
-	[0] = {
+	{
 		.start	= PWM_BASE_ADDR,
 		.end	= PWM_BASE_ADDR + 0x0fff,
-		.flags	= IORESOURCE_MEM
-	},
-	[1] = {
+		.flags	= IORESOURCE_MEM,
+	}, {
 		.start   = MXC_INT_PWM,
 		.end     = MXC_INT_PWM,
 		.flags   = IORESOURCE_IRQ,
@@ -315,28 +305,26 @@ struct platform_device mxc_pwm_device = {
 	.name = "mxc_pwm",
 	.id = 0,
 	.num_resources = ARRAY_SIZE(mxc_pwm_resources),
-	.resource = mxc_pwm_resources
+	.resource = mxc_pwm_resources,
 };
 
 /*
  * Resource definition for the MXC SDHC
  */
 static struct resource mxc_sdhc1_resources[] = {
-	[0] = {
-			.start = SDHC1_BASE_ADDR,
-			.end   = SDHC1_BASE_ADDR + SZ_4K - 1,
-			.flags = IORESOURCE_MEM,
-			},
-	[1] = {
-			.start = MXC_INT_SDHC1,
-			.end   = MXC_INT_SDHC1,
-			.flags = IORESOURCE_IRQ,
-			},
-	[2] = {
-			.start  = DMA_REQ_SDHC1,
-			.end    = DMA_REQ_SDHC1,
-			.flags  = IORESOURCE_DMA
-		},
+	{
+		.start = SDHC1_BASE_ADDR,
+		.end   = SDHC1_BASE_ADDR + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC_INT_SDHC1,
+		.end   = MXC_INT_SDHC1,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		.start  = DMA_REQ_SDHC1,
+		.end    = DMA_REQ_SDHC1,
+		.flags  = IORESOURCE_DMA,
+	},
 };
 
 static u64 mxc_sdhc1_dmamask = 0xffffffffUL;
@@ -353,21 +341,19 @@ struct platform_device mxc_sdhc_device0 = {
 };
 
 static struct resource mxc_sdhc2_resources[] = {
-	[0] = {
-			.start = SDHC2_BASE_ADDR,
-			.end   = SDHC2_BASE_ADDR + SZ_4K - 1,
-			.flags = IORESOURCE_MEM,
-			},
-	[1] = {
-			.start = MXC_INT_SDHC2,
-			.end   = MXC_INT_SDHC2,
-			.flags = IORESOURCE_IRQ,
-			},
-	[2] = {
-			.start  = DMA_REQ_SDHC2,
-			.end    = DMA_REQ_SDHC2,
-			.flags  = IORESOURCE_DMA
-		},
+	{
+		.start = SDHC2_BASE_ADDR,
+		.end   = SDHC2_BASE_ADDR + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC_INT_SDHC2,
+		.end   = MXC_INT_SDHC2,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		.start  = DMA_REQ_SDHC2,
+		.end    = DMA_REQ_SDHC2,
+		.flags  = IORESOURCE_DMA,
+	},
 };
 
 static u64 mxc_sdhc2_dmamask = 0xffffffffUL;
@@ -385,33 +371,28 @@ struct platform_device mxc_sdhc_device1 = {
 
 /* GPIO port description */
 static struct mxc_gpio_port imx_gpio_ports[] = {
-	[0] = {
+	{
 		.chip.label = "gpio-0",
 		.irq = MXC_INT_GPIO,
 		.base = IO_ADDRESS(GPIO_BASE_ADDR),
 		.virtual_irq_start = MXC_GPIO_IRQ_START,
-	},
-	[1] = {
+	}, {
 		.chip.label = "gpio-1",
 		.base = IO_ADDRESS(GPIO_BASE_ADDR + 0x100),
 		.virtual_irq_start = MXC_GPIO_IRQ_START + 32,
-	},
-	[2] = {
+	}, {
 		.chip.label = "gpio-2",
 		.base = IO_ADDRESS(GPIO_BASE_ADDR + 0x200),
 		.virtual_irq_start = MXC_GPIO_IRQ_START + 64,
-	},
-	[3] = {
+	}, {
 		.chip.label = "gpio-3",
 		.base = IO_ADDRESS(GPIO_BASE_ADDR + 0x300),
 		.virtual_irq_start = MXC_GPIO_IRQ_START + 96,
-	},
-	[4] = {
+	}, {
 		.chip.label = "gpio-4",
 		.base = IO_ADDRESS(GPIO_BASE_ADDR + 0x400),
 		.virtual_irq_start = MXC_GPIO_IRQ_START + 128,
-	},
-	[5] = {
+	}, {
 		.chip.label = "gpio-5",
 		.base = IO_ADDRESS(GPIO_BASE_ADDR + 0x500),
 		.virtual_irq_start = MXC_GPIO_IRQ_START + 160,
-- 
cgit v1.2.3


From 3f4f54b4f0052e9838f6bb98535746464d0c01c3 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Tue, 23 Jun 2009 12:12:00 +0200
Subject: mx3: Codingstyle: Let the compiler count arrays

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/devices.c  | 25 ++++++++++---------------
 arch/arm/mach-mx3/mx31lite.c |  5 ++---
 arch/arm/mach-mx3/pcm037.c   |  5 ++---
 arch/arm/mach-mx3/qong.c     |  5 ++---
 4 files changed, 16 insertions(+), 24 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
index 9e87e08fb12..7a5c2ef52a4 100644
--- a/arch/arm/mach-mx3/devices.c
+++ b/arch/arm/mach-mx3/devices.c
@@ -129,19 +129,17 @@ struct platform_device mxc_uart_device4 = {
 
 /* GPIO port description */
 static struct mxc_gpio_port imx_gpio_ports[] = {
-	[0] = {
+	{
 		.chip.label = "gpio-0",
 		.base = IO_ADDRESS(GPIO1_BASE_ADDR),
 		.irq = MXC_INT_GPIO1,
 		.virtual_irq_start = MXC_GPIO_IRQ_START,
-	},
-	[1] = {
+	}, {
 		.chip.label = "gpio-1",
 		.base = IO_ADDRESS(GPIO2_BASE_ADDR),
 		.irq = MXC_INT_GPIO2,
 		.virtual_irq_start = MXC_GPIO_IRQ_START + 32,
-	},
-	[2] = {
+	}, {
 		.chip.label = "gpio-2",
 		.base = IO_ADDRESS(GPIO3_BASE_ADDR),
 		.irq = MXC_INT_GPIO3,
@@ -173,11 +171,11 @@ static struct resource mxc_nand_resources[] = {
 	{
 		.start	= 0, /* runtime dependent */
 		.end	= 0,
-		.flags	= IORESOURCE_MEM
+		.flags	= IORESOURCE_MEM,
 	}, {
 		.start	= MXC_INT_NANDFC,
 		.end	= MXC_INT_NANDFC,
-		.flags	= IORESOURCE_IRQ
+		.flags	= IORESOURCE_IRQ,
 	},
 };
 
@@ -193,8 +191,7 @@ static struct resource mxc_i2c0_resources[] = {
 		.start = I2C_BASE_ADDR,
 		.end = I2C_BASE_ADDR + SZ_4K - 1,
 		.flags = IORESOURCE_MEM,
-	},
-	{
+	}, {
 		.start = MXC_INT_I2C,
 		.end = MXC_INT_I2C,
 		.flags = IORESOURCE_IRQ,
@@ -213,8 +210,7 @@ static struct resource mxc_i2c1_resources[] = {
 		.start = I2C2_BASE_ADDR,
 		.end = I2C2_BASE_ADDR + SZ_4K - 1,
 		.flags = IORESOURCE_MEM,
-	},
-	{
+	}, {
 		.start = MXC_INT_I2C2,
 		.end = MXC_INT_I2C2,
 		.flags = IORESOURCE_IRQ,
@@ -233,8 +229,7 @@ static struct resource mxc_i2c2_resources[] = {
 		.start = I2C3_BASE_ADDR,
 		.end = I2C3_BASE_ADDR + SZ_4K - 1,
 		.flags = IORESOURCE_MEM,
-	},
-	{
+	}, {
 		.start = MXC_INT_I2C3,
 		.end = MXC_INT_I2C3,
 		.flags = IORESOURCE_IRQ,
@@ -400,11 +395,11 @@ static struct resource mxc_fec_resources[] = {
 	{
 		.start	= MXC_FEC_BASE_ADDR,
 		.end	= MXC_FEC_BASE_ADDR + 0xfff,
-		.flags	= IORESOURCE_MEM
+		.flags	= IORESOURCE_MEM,
 	}, {
 		.start	= MXC_INT_FEC,
 		.end	= MXC_INT_FEC,
-		.flags	= IORESOURCE_IRQ
+		.flags	= IORESOURCE_IRQ,
 	},
 };
 
diff --git a/arch/arm/mach-mx3/mx31lite.c b/arch/arm/mach-mx3/mx31lite.c
index b1c0afc40cf..a8d57decdfd 100644
--- a/arch/arm/mach-mx3/mx31lite.c
+++ b/arch/arm/mach-mx3/mx31lite.c
@@ -71,12 +71,11 @@ static struct smsc911x_platform_config smsc911x_config = {
 };
 
 static struct resource smsc911x_resources[] = {
-	[0] = {
+	{
 		.start		= CS4_BASE_ADDR,
 		.end		= CS4_BASE_ADDR + 0x100,
 		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
+	}, {
 		.start		= IOMUX_TO_IRQ(MX31_PIN_SFS6),
 		.end		= IOMUX_TO_IRQ(MX31_PIN_SFS6),
 		.flags		= IORESOURCE_IRQ,
diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c
index d8472206de9..c755c06b75d 100644
--- a/arch/arm/mach-mx3/pcm037.c
+++ b/arch/arm/mach-mx3/pcm037.c
@@ -244,12 +244,11 @@ static struct imxuart_platform_data uart_pdata = {
 };
 
 static struct resource smsc911x_resources[] = {
-	[0] = {
+	{
 		.start		= CS1_BASE_ADDR + 0x300,
 		.end		= CS1_BASE_ADDR + 0x300 + SZ_64K - 1,
 		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
+	}, {
 		.start		= IOMUX_TO_IRQ(MX31_PIN_GPIO3_1),
 		.end		= IOMUX_TO_IRQ(MX31_PIN_GPIO3_1),
 		.flags		= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
diff --git a/arch/arm/mach-mx3/qong.c b/arch/arm/mach-mx3/qong.c
index 0bca4d914ab..044511f1b9a 100644
--- a/arch/arm/mach-mx3/qong.c
+++ b/arch/arm/mach-mx3/qong.c
@@ -81,13 +81,12 @@ static inline void mxc_init_imx_uart(void)
 }
 
 static struct resource dnet_resources[] = {
-	[0] = {
+	{
 		.name	= "dnet-memory",
 		.start	= QONG_DNET_BASEADDR,
 		.end	= QONG_DNET_BASEADDR + QONG_DNET_SIZE - 1,
 		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
+	}, {
 		.start	= QONG_FPGA_IRQ,
 		.end	= QONG_FPGA_IRQ,
 		.flags	= IORESOURCE_IRQ,
-- 
cgit v1.2.3


From 9b0e6db0da1ea433f38b8d952108746f3fc67304 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Tue, 23 Jun 2009 12:14:39 +0200
Subject: mx1: Codingstyle: Let the compiler count arrays

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx1/devices.c | 87 +++++++++++++++++----------------------------
 arch/arm/mach-mx1/scb9328.c | 14 ++++----
 2 files changed, 39 insertions(+), 62 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-mx1/devices.c b/arch/arm/mach-mx1/devices.c
index 76d1ffb4807..b6be29d1cb0 100644
--- a/arch/arm/mach-mx1/devices.c
+++ b/arch/arm/mach-mx1/devices.c
@@ -29,12 +29,11 @@
 #include "devices.h"
 
 static struct resource imx_csi_resources[] = {
-	[0] = {
+	{
 		.start  = 0x00224000,
 		.end    = 0x00224010,
 		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
+	}, {
 		.start  = CSI_INT,
 		.end    = CSI_INT,
 		.flags  = IORESOURCE_IRQ,
@@ -55,12 +54,11 @@ struct platform_device imx_csi_device = {
 };
 
 static struct resource imx_i2c_resources[] = {
-	[0] = {
+	{
 		.start  = 0x00217000,
 		.end    = 0x00217010,
 		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
+	}, {
 		.start  = I2C_INT,
 		.end    = I2C_INT,
 		.flags  = IORESOURCE_IRQ,
@@ -75,22 +73,19 @@ struct platform_device imx_i2c_device = {
 };
 
 static struct resource imx_uart1_resources[] = {
-	[0] = {
+	{
 		.start	= UART1_BASE_ADDR,
 		.end	= UART1_BASE_ADDR + 0xD0,
 		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
+	}, {
 		.start	= UART1_MINT_RX,
 		.end	= UART1_MINT_RX,
 		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
+	}, {
 		.start	= UART1_MINT_TX,
 		.end	= UART1_MINT_TX,
 		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
+	}, {
 		.start	= UART1_MINT_RTS,
 		.end	= UART1_MINT_RTS,
 		.flags	= IORESOURCE_IRQ,
@@ -105,22 +100,19 @@ struct platform_device imx_uart1_device = {
 };
 
 static struct resource imx_uart2_resources[] = {
-	[0] = {
+	{
 		.start	= UART2_BASE_ADDR,
 		.end	= UART2_BASE_ADDR + 0xD0,
 		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
+	}, {
 		.start	= UART2_MINT_RX,
 		.end	= UART2_MINT_RX,
 		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
+	}, {
 		.start	= UART2_MINT_TX,
 		.end	= UART2_MINT_TX,
 		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
+	}, {
 		.start	= UART2_MINT_RTS,
 		.end	= UART2_MINT_RTS,
 		.flags	= IORESOURCE_IRQ,
@@ -135,17 +127,15 @@ struct platform_device imx_uart2_device = {
 };
 
 static struct resource imx_rtc_resources[] = {
-	[0] = {
+	{
 		.start  = 0x00204000,
 		.end    = 0x00204024,
 		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
+	}, {
 		.start  = RTC_INT,
 		.end    = RTC_INT,
 		.flags  = IORESOURCE_IRQ,
-	},
-	[2] = {
+	}, {
 		.start  = RTC_SAMINT,
 		.end    = RTC_SAMINT,
 		.flags  = IORESOURCE_IRQ,
@@ -160,12 +150,11 @@ struct platform_device imx_rtc_device = {
 };
 
 static struct resource imx_wdt_resources[] = {
-	[0] = {
+	{
 		.start  = 0x00201000,
 		.end    = 0x00201008,
 		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
+	}, {
 		.start  = WDT_INT,
 		.end    = WDT_INT,
 		.flags  = IORESOURCE_IRQ,
@@ -180,42 +169,35 @@ struct platform_device imx_wdt_device = {
 };
 
 static struct resource imx_usb_resources[] = {
-	[0] = {
+	{
 		.start	= 0x00212000,
 		.end	= 0x00212148,
 		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
+	}, {
 		.start	= USBD_INT0,
 		.end	= USBD_INT0,
 		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
+	}, {
 		.start	= USBD_INT1,
 		.end	= USBD_INT1,
 		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
+	}, {
 		.start	= USBD_INT2,
 		.end	= USBD_INT2,
 		.flags	= IORESOURCE_IRQ,
-	},
-	[4] = {
+	}, {
 		.start	= USBD_INT3,
 		.end	= USBD_INT3,
 		.flags	= IORESOURCE_IRQ,
-	},
-	[5] = {
+	}, {
 		.start	= USBD_INT4,
 		.end	= USBD_INT4,
 		.flags	= IORESOURCE_IRQ,
-	},
-	[6] = {
+	}, {
 		.start	= USBD_INT5,
 		.end	= USBD_INT5,
 		.flags	= IORESOURCE_IRQ,
-	},
-	[7] = {
+	}, {
 		.start	= USBD_INT6,
 		.end	= USBD_INT6,
 		.flags	= IORESOURCE_IRQ,
@@ -231,29 +213,26 @@ struct platform_device imx_usb_device = {
 
 /* GPIO port description */
 static struct mxc_gpio_port imx_gpio_ports[] = {
-	[0] = {
+	{
 		.chip.label = "gpio-0",
 		.base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR),
 		.irq = GPIO_INT_PORTA,
-		.virtual_irq_start = MXC_GPIO_IRQ_START
-	},
-	[1] = {
+		.virtual_irq_start = MXC_GPIO_IRQ_START,
+	}, {
 		.chip.label = "gpio-1",
 		.base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR + 0x100),
 		.irq = GPIO_INT_PORTB,
-		.virtual_irq_start = MXC_GPIO_IRQ_START + 32
-	},
-	[2] = {
+		.virtual_irq_start = MXC_GPIO_IRQ_START + 32,
+	}, {
 		.chip.label = "gpio-2",
 		.base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR + 0x200),
 		.irq = GPIO_INT_PORTC,
-		.virtual_irq_start = MXC_GPIO_IRQ_START + 64
-	},
-	[3] = {
+		.virtual_irq_start = MXC_GPIO_IRQ_START + 64,
+	}, {
 		.chip.label = "gpio-3",
 		.base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR + 0x300),
 		.irq = GPIO_INT_PORTD,
-		.virtual_irq_start = MXC_GPIO_IRQ_START + 96
+		.virtual_irq_start = MXC_GPIO_IRQ_START + 96,
 	}
 };
 
diff --git a/arch/arm/mach-mx1/scb9328.c b/arch/arm/mach-mx1/scb9328.c
index 125d495e9c7..325d98df605 100644
--- a/arch/arm/mach-mx1/scb9328.c
+++ b/arch/arm/mach-mx1/scb9328.c
@@ -68,22 +68,20 @@ static struct dm9000_plat_data dm9000_platdata = {
  * to gain access to address latch registers and the data path.
  */
 static struct resource dm9000x_resources[] = {
-	[0] = {
+	{
 		.name	= "address area",
 		.start	= IMX_CS5_PHYS,
 		.end	= IMX_CS5_PHYS + 1,
-		.flags	= IORESOURCE_MEM	/* address access */
-	},
-	[1] = {
+		.flags	= IORESOURCE_MEM,	/* address access */
+	}, {
 		.name	= "data area",
 		.start	= IMX_CS5_PHYS + 4,
 		.end	= IMX_CS5_PHYS + 5,
-		.flags	= IORESOURCE_MEM	/* data access */
-	},
-	[2] = {
+		.flags	= IORESOURCE_MEM,	/* data access */
+	}, {
 		.start	= IRQ_GPIOC(3),
 		.end	= IRQ_GPIOC(3),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
 	},
 };
 
-- 
cgit v1.2.3


From f497d0153a6b53b4cfd004de5f10b14bf630d852 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Wed, 18 Mar 2009 11:29:31 +0100
Subject: imxfb: calculate bpix value from bits_per_pixel

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/include/mach/imxfb.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/plat-mxc/include/mach/imxfb.h b/arch/arm/plat-mxc/include/mach/imxfb.h
index 9f0101157ec..66259f6158e 100644
--- a/arch/arm/plat-mxc/include/mach/imxfb.h
+++ b/arch/arm/plat-mxc/include/mach/imxfb.h
@@ -13,7 +13,8 @@
 #define PCR_BPIX_4	(2 << 25)
 #define PCR_BPIX_8	(3 << 25)
 #define PCR_BPIX_12	(4 << 25)
-#define PCR_BPIX_16	(4 << 25)
+#define PCR_BPIX_16	(5 << 25)
+#define PCR_BPIX_18	(6 << 25)
 #define PCR_PIXPOL	(1 << 24)
 #define PCR_FLMPOL	(1 << 23)
 #define PCR_LPPOL	(1 << 22)
-- 
cgit v1.2.3


From 343684ffb793a3c371579b7bbc16724713ee5ac7 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Thu, 19 Mar 2009 08:25:41 +0100
Subject: imxfb: Add support for multiple displays

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx2/mx27ads.c            | 36 +++++++++------
 arch/arm/mach-mx2/pcm970-baseboard.c   | 83 +++++++++++++++++++++++-----------
 arch/arm/plat-mxc/include/mach/imxfb.h | 26 ++++-------
 3 files changed, 88 insertions(+), 57 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-mx2/mx27ads.c b/arch/arm/mach-mx2/mx27ads.c
index a9f69eb58b7..83e412b713e 100644
--- a/arch/arm/mach-mx2/mx27ads.c
+++ b/arch/arm/mach-mx2/mx27ads.c
@@ -183,20 +183,29 @@ void lcd_power(int on)
 		__raw_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_CLEAR_REG);
 }
 
-static struct imx_fb_platform_data mx27ads_fb_data = {
-	.pixclock	= 188679,
-	.xres		= 240,
-	.yres		= 320,
-
-	.bpp		= 16,
-	.hsync_len	= 1,
-	.left_margin	= 9,
-	.right_margin	= 16,
+static struct imx_fb_videomode mx27ads_modes[] = {
+	{
+		.mode = {
+			.name		= "Sharp-LQ035Q7",
+			.refresh	= 60,
+			.xres		= 240,
+			.yres		= 320,
+			.pixclock	= 188679, /* in ps (5.3MHz) */
+			.hsync_len	= 1,
+			.left_margin	= 9,
+			.right_margin	= 16,
+			.vsync_len	= 1,
+			.upper_margin	= 7,
+			.lower_margin	= 9,
+		},
+		.bpp		= 16,
+		.pcr		= 0xFB008BC0,
+	},
+};
 
-	.vsync_len	= 1,
-	.upper_margin	= 7,
-	.lower_margin	= 9,
-	.fixed_screen_cpu = 0,
+static struct imx_fb_platform_data mx27ads_fb_data = {
+	.mode = mx27ads_modes,
+	.num_modes = ARRAY_SIZE(mx27ads_modes),
 
 	/*
 	 * - HSYNC active high
@@ -207,7 +216,6 @@ static struct imx_fb_platform_data mx27ads_fb_data = {
 	 * - data enable low active
 	 * - enable sharp mode
 	 */
-	.pcr		= 0xFB008BC0,
 	.pwmr		= 0x00A903FF,
 	.lscr1		= 0x00120300,
 	.dmacr		= 0x00020010,
diff --git a/arch/arm/mach-mx2/pcm970-baseboard.c b/arch/arm/mach-mx2/pcm970-baseboard.c
index 6a3acaf57dd..8e2bc94f1a0 100644
--- a/arch/arm/mach-mx2/pcm970-baseboard.c
+++ b/arch/arm/mach-mx2/pcm970-baseboard.c
@@ -125,35 +125,64 @@ static struct imxmmc_platform_data sdhc_pdata = {
 	.exit = pcm970_sdhc2_exit,
 };
 
-/*
- * Connected is a portrait Sharp-QVGA display
- * of type: LQ035Q7DH06
- */
-static struct imx_fb_platform_data pcm038_fb_data = {
-	.pixclock	= 188679, /* in ps (5.3MHz) */
-	.xres		= 240,
-	.yres		= 320,
-
-	.bpp		= 16,
-	.hsync_len	= 7,
-	.left_margin	= 5,
-	.right_margin	= 16,
+static struct imx_fb_videomode pcm970_modes[] = {
+	{
+		.mode = {
+			.name		= "Sharp-LQ035Q7",
+			.refresh	= 60,
+			.xres		= 240,
+			.yres		= 320,
+			.pixclock	= 188679, /* in ps (5.3MHz) */
+			.hsync_len	= 7,
+			.left_margin	= 5,
+			.right_margin	= 16,
+			.vsync_len	= 1,
+			.upper_margin	= 7,
+			.lower_margin	= 9,
+		},
+		/*
+		 * - HSYNC active high
+		 * - VSYNC active high
+		 * - clk notenabled while idle
+		 * - clock not inverted
+		 * - data not inverted
+		 * - data enable low active
+		 * - enable sharp mode
+		 */
+		.pcr		= 0xF00080C0,
+		.bpp		= 16,
+	}, {
+		.mode = {
+			.name		= "TX090",
+			.refresh	= 60,
+			.xres		= 240,
+			.yres		= 320,
+			.pixclock	= 38255,
+			.left_margin	= 144,
+			.right_margin	= 0,
+			.upper_margin	= 7,
+			.lower_margin	= 40,
+			.hsync_len	= 96,
+			.vsync_len	= 1,
+		},
+		/*
+		 * - HSYNC active low (1 << 22)
+		 * - VSYNC active low (1 << 23)
+		 * - clk notenabled while idle
+		 * - clock not inverted
+		 * - data not inverted
+		 * - data enable low active
+		 * - enable sharp mode
+		 */
+		.pcr = 0xF0008080 | (1<<22) | (1<<23) | (1<<19),
+		.bpp = 32,
+	},
+};
 
-	.vsync_len	= 1,
-	.upper_margin	= 7,
-	.lower_margin	= 9,
-	.fixed_screen_cpu = 0,
+static struct imx_fb_platform_data pcm038_fb_data = {
+	.mode = pcm970_modes,
+	.num_modes = ARRAY_SIZE(pcm970_modes),
 
-	/*
-	 * - HSYNC active high
-	 * - VSYNC active high
-	 * - clk notenabled while idle
-	 * - clock not inverted
-	 * - data not inverted
-	 * - data enable low active
-	 * - enable sharp mode
-	 */
-	.pcr		= 0xFA0080C0,
 	.pwmr		= 0x00A903FF,
 	.lscr1		= 0x00120300,
 	.dmacr		= 0x00020010,
diff --git a/arch/arm/plat-mxc/include/mach/imxfb.h b/arch/arm/plat-mxc/include/mach/imxfb.h
index 66259f6158e..5263506b7dd 100644
--- a/arch/arm/plat-mxc/include/mach/imxfb.h
+++ b/arch/arm/plat-mxc/include/mach/imxfb.h
@@ -2,6 +2,8 @@
  * This structure describes the machine which we are running on.
  */
 
+#include <linux/fb.h>
+
 #define PCR_TFT		(1 << 31)
 #define PCR_COLOR	(1 << 30)
 #define PCR_PBSIZ_1	(0 << 28)
@@ -47,29 +49,21 @@
 #define DMACR_HM(x)	(((x) & 0xf) << 16)
 #define DMACR_TM(x)	((x) & 0xf)
 
-struct imx_fb_platform_data {
-	u_long		pixclock;
-
-	u_short		xres;
-	u_short		yres;
-
-	u_int		nonstd;
-	u_char		bpp;
-	u_char		hsync_len;
-	u_char		left_margin;
-	u_char		right_margin;
+struct imx_fb_videomode {
+	struct fb_videomode mode;
+	u32 pcr;
+	unsigned char	bpp;
+};
 
-	u_char		vsync_len;
-	u_char		upper_margin;
-	u_char		lower_margin;
-	u_char		sync;
+struct imx_fb_platform_data {
+	struct imx_fb_videomode *mode;
+	int		num_modes;
 
 	u_int		cmap_greyscale:1,
 			cmap_inverse:1,
 			cmap_static:1,
 			unused:29;
 
-	u_int		pcr;
 	u_int		pwmr;
 	u_int		lscr1;
 	u_int		dmacr;
-- 
cgit v1.2.3


From 91bf9a2566a6f507f45ad2fb59802e528f5a9c3f Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Tue, 23 Jun 2009 13:21:28 +0200
Subject: pcm037: Add support for SJA1000 on baseboard

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/pcm037.c | 30 ++++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c
index c755c06b75d..1b9140e2303 100644
--- a/arch/arm/mach-mx3/pcm037.c
+++ b/arch/arm/mach-mx3/pcm037.c
@@ -32,6 +32,7 @@
 #include <linux/spi/spi.h>
 #include <linux/irq.h>
 #include <linux/fsl_devices.h>
+#include <linux/can/platform/sja1000.h>
 
 #include <media/soc_camera.h>
 
@@ -514,6 +515,33 @@ static struct mx3fb_platform_data mx3fb_pdata = {
 	.num_modes	= ARRAY_SIZE(fb_modedb),
 };
 
+static struct resource pcm970_sja1000_resources[] = {
+	{
+		.start   = CS5_BASE_ADDR,
+		.end     = CS5_BASE_ADDR + 0x100 - 1,
+		.flags   = IORESOURCE_MEM,
+	}, {
+		.start   = IOMUX_TO_IRQ(IOMUX_PIN(48, 105)),
+		.end     = IOMUX_TO_IRQ(IOMUX_PIN(48, 105)),
+		.flags   = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
+	},
+};
+
+struct sja1000_platform_data pcm970_sja1000_platform_data = {
+	.clock		= 16000000 / 2,
+	.ocr		= 0x40 | 0x18,
+	.cdr		= 0x40,
+};
+
+static struct platform_device pcm970_sja1000 = {
+	.name = "sja1000_platform",
+	.dev = {
+		.platform_data = &pcm970_sja1000_platform_data,
+	},
+	.resource = pcm970_sja1000_resources,
+	.num_resources = ARRAY_SIZE(pcm970_sja1000_resources),
+};
+
 /*
  * Board specific initialization.
  */
@@ -574,6 +602,8 @@ static void __init mxc_board_init(void)
 
 	if (!pcm037_camera_alloc_dma(4 * 1024 * 1024))
 		mxc_register_device(&mx3_camera, &camera_pdata);
+
+	platform_device_register(&pcm970_sja1000);
 }
 
 static void __init pcm037_timer_init(void)
-- 
cgit v1.2.3


From 61b032ef263c17bb733cfb3f87a811be52adbe22 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Tue, 23 Jun 2009 13:21:42 +0200
Subject: pcm038: Add support for SJA1000 on baseboard

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx2/pcm970-baseboard.c | 29 +++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-mx2/pcm970-baseboard.c b/arch/arm/mach-mx2/pcm970-baseboard.c
index 8e2bc94f1a0..c261f59b0b4 100644
--- a/arch/arm/mach-mx2/pcm970-baseboard.c
+++ b/arch/arm/mach-mx2/pcm970-baseboard.c
@@ -19,6 +19,7 @@
 #include <linux/gpio.h>
 #include <linux/irq.h>
 #include <linux/platform_device.h>
+#include <linux/can/platform/sja1000.h>
 
 #include <asm/mach/arch.h>
 
@@ -188,6 +189,33 @@ static struct imx_fb_platform_data pcm038_fb_data = {
 	.dmacr		= 0x00020010,
 };
 
+static struct resource pcm970_sja1000_resources[] = {
+	{
+		.start   = CS4_BASE_ADDR,
+		.end     = CS4_BASE_ADDR + 0x100 - 1,
+		.flags   = IORESOURCE_MEM,
+	}, {
+		.start   = IRQ_GPIOE(19),
+		.end     = IRQ_GPIOE(19),
+		.flags   = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
+	},
+};
+
+struct sja1000_platform_data pcm970_sja1000_platform_data = {
+	.clock		= 16000000 / 2,
+	.ocr		= 0x40 | 0x18,
+	.cdr		= 0x40,
+};
+
+static struct platform_device pcm970_sja1000 = {
+	.name = "sja1000_platform",
+	.dev = {
+		.platform_data = &pcm970_sja1000_platform_data,
+	},
+	.resource = pcm970_sja1000_resources,
+	.num_resources = ARRAY_SIZE(pcm970_sja1000_resources),
+};
+
 /*
  * system init for baseboard usage. Will be called by pcm038 init.
  *
@@ -201,4 +229,5 @@ void __init pcm970_baseboard_init(void)
 
 	mxc_register_device(&mxc_fb_device, &pcm038_fb_data);
 	mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata);
+	platform_device_register(&pcm970_sja1000);
 }
-- 
cgit v1.2.3


From 8afaada2dc9247ffcd2982be824cd290ace18f55 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Mon, 15 Jun 2009 12:36:25 +0200
Subject: mxc gpio: CONFIG_ARCH_* -> cpu_is_*()

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/gpio.c | 25 +++++++++++--------------
 1 file changed, 11 insertions(+), 14 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c
index 7506d963be4..b7071572035 100644
--- a/arch/arm/plat-mxc/gpio.c
+++ b/arch/arm/plat-mxc/gpio.c
@@ -162,7 +162,6 @@ static void mxc_gpio_irq_handler(struct mxc_gpio_port *port, u32 irq_stat)
 	}
 }
 
-#if defined(CONFIG_ARCH_MX3) || defined(CONFIG_ARCH_MX1)
 /* MX1 and MX3 has one interrupt *per* gpio port */
 static void mx3_gpio_irq_handler(u32 irq, struct irq_desc *desc)
 {
@@ -174,9 +173,7 @@ static void mx3_gpio_irq_handler(u32 irq, struct irq_desc *desc)
 
 	mxc_gpio_irq_handler(port, irq_stat);
 }
-#endif
 
-#ifdef CONFIG_ARCH_MX2
 /* MX2 has one interrupt *for all* gpio ports */
 static void mx2_gpio_irq_handler(u32 irq, struct irq_desc *desc)
 {
@@ -195,7 +192,6 @@ static void mx2_gpio_irq_handler(u32 irq, struct irq_desc *desc)
 			mxc_gpio_irq_handler(&port[i], irq_stat);
 	}
 }
-#endif
 
 static struct irq_chip gpio_irq_chip = {
 	.ack = gpio_ack_irq,
@@ -284,17 +280,18 @@ int __init mxc_gpio_init(struct mxc_gpio_port *port, int cnt)
 		/* its a serious configuration bug when it fails */
 		BUG_ON( gpiochip_add(&port[i].chip) < 0 );
 
-#if defined(CONFIG_ARCH_MX3) || defined(CONFIG_ARCH_MX1)
-		/* setup one handler for each entry */
-		set_irq_chained_handler(port[i].irq, mx3_gpio_irq_handler);
-		set_irq_data(port[i].irq, &port[i]);
-#endif
+		if (cpu_is_mx1() || cpu_is_mx3()) {
+			/* setup one handler for each entry */
+			set_irq_chained_handler(port[i].irq, mx3_gpio_irq_handler);
+			set_irq_data(port[i].irq, &port[i]);
+		}
+	}
+
+	if (cpu_is_mx2()) {
+		/* setup one handler for all GPIO interrupts */
+		set_irq_chained_handler(port[0].irq, mx2_gpio_irq_handler);
+		set_irq_data(port[0].irq, port);
 	}
 
-#ifdef CONFIG_ARCH_MX2
-	/* setup one handler for all GPIO interrupts */
-	set_irq_chained_handler(port[0].irq, mx2_gpio_irq_handler);
-	set_irq_data(port[0].irq, port);
-#endif
 	return 0;
 }
-- 
cgit v1.2.3


From 494f22dddc6308b9c35984118ff4cb1681ad8e48 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Wed, 27 May 2009 18:26:51 +0200
Subject: MXC gpio interrupt support: move register definitions to .c file

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/gpio.c              | 17 +++++++++++++++++
 arch/arm/plat-mxc/include/mach/mx1.h  | 14 --------------
 arch/arm/plat-mxc/include/mach/mx2x.h | 14 --------------
 arch/arm/plat-mxc/include/mach/mx3x.h | 14 --------------
 4 files changed, 17 insertions(+), 42 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c
index b7071572035..f0315edb3eb 100644
--- a/arch/arm/plat-mxc/gpio.c
+++ b/arch/arm/plat-mxc/gpio.c
@@ -29,6 +29,23 @@
 static struct mxc_gpio_port *mxc_gpio_ports;
 static int gpio_table_size;
 
+#define cpu_is_mx1_mx2()	(cpu_is_mx1() || cpu_is_mx2())
+
+#define GPIO_DR		(cpu_is_mx1_mx2() ? 0x1c : 0x00)
+#define GPIO_GDIR	(cpu_is_mx1_mx2() ? 0x00 : 0x04)
+#define GPIO_PSR	(cpu_is_mx1_mx2() ? 0x24 : 0x08)
+#define GPIO_ICR1	(cpu_is_mx1_mx2() ? 0x28 : 0x0C)
+#define GPIO_ICR2	(cpu_is_mx1_mx2() ? 0x2C : 0x10)
+#define GPIO_IMR	(cpu_is_mx1_mx2() ? 0x30 : 0x14)
+#define GPIO_ISR	(cpu_is_mx1_mx2() ? 0x34 : 0x18)
+#define GPIO_ISR	(cpu_is_mx1_mx2() ? 0x34 : 0x18)
+
+#define GPIO_INT_LOW_LEV	(cpu_is_mx1_mx2() ? 0x3 : 0x0)
+#define GPIO_INT_HIGH_LEV	(cpu_is_mx1_mx2() ? 0x2 : 0x1)
+#define GPIO_INT_RISE_EDGE	(cpu_is_mx1_mx2() ? 0x0 : 0x2)
+#define GPIO_INT_FALL_EDGE	(cpu_is_mx1_mx2() ? 0x1 : 0x3)
+#define GPIO_INT_NONE		0x4
+
 /* Note: This driver assumes 32 GPIOs are handled in one register */
 
 static void _clear_gpio_irqstatus(struct mxc_gpio_port *port, u32 index)
diff --git a/arch/arm/plat-mxc/include/mach/mx1.h b/arch/arm/plat-mxc/include/mach/mx1.h
index ee60d64728c..1b2890a5c45 100644
--- a/arch/arm/plat-mxc/include/mach/mx1.h
+++ b/arch/arm/plat-mxc/include/mach/mx1.h
@@ -134,20 +134,6 @@
 #define GPIO_INT_PORTD		62
 #define WDT_INT			63
 
-/* gpio and gpio based interrupt handling */
-#define GPIO_DR		 	0x1C
-#define GPIO_GDIR	 	0x00
-#define GPIO_PSR	 	0x24
-#define GPIO_ICR1	 	0x28
-#define GPIO_ICR2	 	0x2C
-#define GPIO_IMR	 	0x30
-#define GPIO_ISR	 	0x34
-#define GPIO_INT_LOW_LEV	0x3
-#define GPIO_INT_HIGH_LEV	0x2
-#define GPIO_INT_RISE_EDGE 	0x0
-#define GPIO_INT_FALL_EDGE	0x1
-#define GPIO_INT_NONE		0x4
-
 /* DMA */
 #define DMA_REQ_UART3_T		2
 #define DMA_REQ_UART3_R		3
diff --git a/arch/arm/plat-mxc/include/mach/mx2x.h b/arch/arm/plat-mxc/include/mach/mx2x.h
index 5982ae5a00d..db5d921e0fe 100644
--- a/arch/arm/plat-mxc/include/mach/mx2x.h
+++ b/arch/arm/plat-mxc/include/mach/mx2x.h
@@ -150,20 +150,6 @@
 #define MXC_INT_GPIO		8
 #define MXC_INT_CSPI3		6
 
-/* gpio and gpio based interrupt handling */
-#define GPIO_DR		 	0x1C
-#define GPIO_GDIR	 	0x00
-#define GPIO_PSR	 	0x24
-#define GPIO_ICR1	 	0x28
-#define GPIO_ICR2	 	0x2C
-#define GPIO_IMR	 	0x30
-#define GPIO_ISR	 	0x34
-#define GPIO_INT_LOW_LEV	0x3
-#define GPIO_INT_HIGH_LEV	0x2
-#define GPIO_INT_RISE_EDGE 	0x0
-#define GPIO_INT_FALL_EDGE	0x1
-#define GPIO_INT_NONE		0x4
-
 /* fixed DMA request numbers */
 #define DMA_REQ_CSI_RX          31
 #define DMA_REQ_CSI_STAT        30
diff --git a/arch/arm/plat-mxc/include/mach/mx3x.h b/arch/arm/plat-mxc/include/mach/mx3x.h
index 16f68e8f4cf..009f4440276 100644
--- a/arch/arm/plat-mxc/include/mach/mx3x.h
+++ b/arch/arm/plat-mxc/include/mach/mx3x.h
@@ -259,20 +259,6 @@
 #define SYSTEM_REV_MIN		CHIP_REV_1_0
 #define SYSTEM_REV_NUM		3
 
-/* gpio and gpio based interrupt handling */
-#define GPIO_DR		 	0x00
-#define GPIO_GDIR	 	0x04
-#define GPIO_PSR	 	0x08
-#define GPIO_ICR1	 	0x0C
-#define GPIO_ICR2	 	0x10
-#define GPIO_IMR	 	0x14
-#define GPIO_ISR	 	0x18
-#define GPIO_INT_LOW_LEV	0x0
-#define GPIO_INT_HIGH_LEV	0x1
-#define GPIO_INT_RISE_EDGE	0x2
-#define GPIO_INT_FALL_EDGE	0x3
-#define GPIO_INT_NONE		0x4
-
 /* Mandatory defines used globally */
 
 #if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
-- 
cgit v1.2.3


From 5ef881bbecc72862fa379cb286a50f2781db4cec Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Fri, 19 Jun 2009 11:35:08 +0200
Subject: MXC: pwm driver fixes

- fix off-by-one error in divider calculation
- disable pwm in pwm_disable

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/pwm.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/plat-mxc/pwm.c b/arch/arm/plat-mxc/pwm.c
index ae34198a79d..42dd17b89ff 100644
--- a/arch/arm/plat-mxc/pwm.c
+++ b/arch/arm/plat-mxc/pwm.c
@@ -72,7 +72,7 @@ int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
 
 		writel(duty_cycles, pwm->mmio_base + MX3_PWMSAR);
 		writel(period_cycles, pwm->mmio_base + MX3_PWMPR);
-		writel(MX3_PWMCR_PRESCALER(prescale - 1) |
+		writel(MX3_PWMCR_PRESCALER(prescale) |
 			MX3_PWMCR_CLKSRC_IPG_HIGH | MX3_PWMCR_EN,
 			pwm->mmio_base + MX3_PWMCR);
 	} else if (cpu_is_mx1() || cpu_is_mx21()) {
@@ -118,6 +118,8 @@ EXPORT_SYMBOL(pwm_enable);
 
 void pwm_disable(struct pwm_device *pwm)
 {
+	writel(0, pwm->mmio_base + MX3_PWMCR);
+
 	if (pwm->clk_enabled) {
 		clk_disable(pwm->clk);
 		pwm->clk_enabled = 0;
-- 
cgit v1.2.3


From 6d73665f052a8dadf6f33dfd2546e15199ad7c5f Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Wed, 3 Jun 2009 11:22:32 +0200
Subject: MXC PLL decoding: calculate mfn value with less magic

Also, use cpu_is_* macros rather than CONFIG_ARCH_*

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/clock.c | 16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-mxc/clock.c b/arch/arm/plat-mxc/clock.c
index 92e13566cd4..f653213b741 100644
--- a/arch/arm/plat-mxc/clock.c
+++ b/arch/arm/plat-mxc/clock.c
@@ -39,6 +39,7 @@
 #include <linux/string.h>
 
 #include <mach/clock.h>
+#include <mach/hardware.h>
 
 static LIST_HEAD(clocks);
 static DEFINE_MUTEX(clocks_mutex);
@@ -363,12 +364,11 @@ unsigned long mxc_decode_pll(unsigned int reg_val, u32 freq)
 
 	mfn_abs = mfn;
 
-#if !defined CONFIG_ARCH_MX1 && !defined CONFIG_ARCH_MX21
-	if (mfn >= 0x200) {
-		mfn |= 0xFFFFFE00;
-		mfn_abs = -mfn;
-	}
-#endif
+	/* On all i.MXs except i.MX1 and i.MX21 mfn is a 10bit
+	 * 2's complements number
+	 */
+	if (!cpu_is_mx1() && !cpu_is_mx21() && mfn >= 0x200)
+		mfn_abs = 0x400 - mfn;
 
 	freq *= 2;
 	freq /= pd + 1;
@@ -376,8 +376,10 @@ unsigned long mxc_decode_pll(unsigned int reg_val, u32 freq)
 	ll = (unsigned long long)freq * mfn_abs;
 
 	do_div(ll, mfd + 1);
-	if (mfn < 0)
+
+	if (!cpu_is_mx1() && !cpu_is_mx21() && mfn >= 0x200)
 		ll = -ll;
+
 	ll = (freq * mfi) + ll;
 
 	return ll;
-- 
cgit v1.2.3


From 7dae1134cd4117c1a579f8ae58ce13c1c1ff7164 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Sat, 7 Feb 2009 13:34:01 +0100
Subject: [ARM] MXC: Switch MX1 to clkdev support

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx1/clock.c | 84 ++++++++++++++++-------------------------------
 arch/arm/plat-mxc/Kconfig |  1 +
 2 files changed, 29 insertions(+), 56 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-mx1/clock.c b/arch/arm/mach-mx1/clock.c
index 7b739dd8700..d1b588519ad 100644
--- a/arch/arm/mach-mx1/clock.c
+++ b/arch/arm/mach-mx1/clock.c
@@ -18,11 +18,14 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/list.h>
 #include <linux/math64.h>
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/io.h>
 
+#include <asm/clkdev.h>
+
 #include <mach/clock.h>
 #include <mach/hardware.h>
 #include <mach/common.h>
@@ -94,7 +97,6 @@ static unsigned long clk16m_get_rate(struct clk *clk)
 }
 
 static struct clk clk16m = {
-	.name = "CLK16M",
 	.get_rate = clk16m_get_rate,
 	.enable = _clk_enable,
 	.enable_reg = CCM_CSCR,
@@ -111,7 +113,6 @@ static unsigned long clk32_get_rate(struct clk *clk)
 }
 
 static struct clk clk32 = {
-	.name = "CLK32",
 	.get_rate = clk32_get_rate,
 };
 
@@ -121,7 +122,6 @@ static unsigned long clk32_premult_get_rate(struct clk *clk)
 }
 
 static struct clk clk32_premult = {
-	.name = "CLK32_premultiplier",
 	.parent = &clk32,
 	.get_rate = clk32_premult_get_rate,
 };
@@ -156,7 +156,6 @@ static int prem_clk_set_parent(struct clk *clk, struct clk *parent)
 }
 
 static struct clk prem_clk = {
-	.name = "prem_clk",
 	.set_parent = prem_clk_set_parent,
 };
 
@@ -167,7 +166,6 @@ static unsigned long system_clk_get_rate(struct clk *clk)
 }
 
 static struct clk system_clk = {
-	.name = "system_clk",
 	.parent = &prem_clk,
 	.get_rate = system_clk_get_rate,
 };
@@ -179,7 +177,6 @@ static unsigned long mcu_clk_get_rate(struct clk *clk)
 }
 
 static struct clk mcu_clk = {
-	.name = "mcu_clk",
 	.parent = &clk32_premult,
 	.get_rate = mcu_clk_get_rate,
 };
@@ -195,7 +192,6 @@ static unsigned long fclk_get_rate(struct clk *clk)
 }
 
 static struct clk fclk = {
-	.name = "fclk",
 	.parent = &mcu_clk,
 	.get_rate = fclk_get_rate,
 };
@@ -238,7 +234,6 @@ static int hclk_set_rate(struct clk *clk, unsigned long rate)
 }
 
 static struct clk hclk = {
-	.name = "hclk",
 	.parent = &system_clk,
 	.get_rate = hclk_get_rate,
 	.round_rate = hclk_round_rate,
@@ -280,7 +275,6 @@ static int clk48m_set_rate(struct clk *clk, unsigned long rate)
 }
 
 static struct clk clk48m = {
-	.name = "CLK48M",
 	.parent = &system_clk,
 	.get_rate = clk48m_get_rate,
 	.round_rate = clk48m_round_rate,
@@ -400,21 +394,18 @@ static int perclk3_set_rate(struct clk *clk, unsigned long rate)
 
 static struct clk perclk[] = {
 	{
-		.name = "perclk",
 		.id = 0,
 		.parent = &system_clk,
 		.get_rate = perclk1_get_rate,
 		.round_rate = perclk1_round_rate,
 		.set_rate = perclk1_set_rate,
 	}, {
-		.name = "perclk",
 		.id = 1,
 		.parent = &system_clk,
 		.get_rate = perclk2_get_rate,
 		.round_rate = perclk2_round_rate,
 		.set_rate = perclk2_set_rate,
 	}, {
-		.name = "perclk",
 		.id = 2,
 		.parent = &system_clk,
 		.get_rate = perclk3_get_rate,
@@ -457,12 +448,10 @@ static int clko_set_parent(struct clk *clk, struct clk *parent)
 }
 
 static struct clk clko_clk = {
-	.name = "clko_clk",
 	.set_parent = clko_set_parent,
 };
 
 static struct clk dma_clk = {
-	.name = "dma",
 	.parent = &hclk,
 	.round_rate = _clk_parent_round_rate,
 	.set_rate = _clk_parent_set_rate,
@@ -473,7 +462,6 @@ static struct clk dma_clk = {
 };
 
 static struct clk csi_clk = {
-	.name = "csi_clk",
 	.parent = &hclk,
 	.round_rate = _clk_parent_round_rate,
 	.set_rate = _clk_parent_set_rate,
@@ -484,7 +472,6 @@ static struct clk csi_clk = {
 };
 
 static struct clk mma_clk = {
-	.name = "mma_clk",
 	.parent = &hclk,
 	.round_rate = _clk_parent_round_rate,
 	.set_rate = _clk_parent_set_rate,
@@ -495,7 +482,6 @@ static struct clk mma_clk = {
 };
 
 static struct clk usbd_clk = {
-	.name = "usbd_clk",
 	.parent = &clk48m,
 	.round_rate = _clk_parent_round_rate,
 	.set_rate = _clk_parent_set_rate,
@@ -506,99 +492,85 @@ static struct clk usbd_clk = {
 };
 
 static struct clk gpt_clk = {
-	.name = "gpt_clk",
 	.parent = &perclk[0],
 	.round_rate = _clk_parent_round_rate,
 	.set_rate = _clk_parent_set_rate,
 };
 
 static struct clk uart_clk = {
-	.name = "uart",
 	.parent = &perclk[0],
 	.round_rate = _clk_parent_round_rate,
 	.set_rate = _clk_parent_set_rate,
 };
 
 static struct clk i2c_clk = {
-	.name = "i2c_clk",
 	.parent = &hclk,
 	.round_rate = _clk_parent_round_rate,
 	.set_rate = _clk_parent_set_rate,
 };
 
 static struct clk spi_clk = {
-	.name = "spi_clk",
 	.parent = &perclk[1],
 	.round_rate = _clk_parent_round_rate,
 	.set_rate = _clk_parent_set_rate,
 };
 
 static struct clk sdhc_clk = {
-	.name = "sdhc_clk",
 	.parent = &perclk[1],
 	.round_rate = _clk_parent_round_rate,
 	.set_rate = _clk_parent_set_rate,
 };
 
 static struct clk lcdc_clk = {
-	.name = "lcdc_clk",
 	.parent = &perclk[1],
 	.round_rate = _clk_parent_round_rate,
 	.set_rate = _clk_parent_set_rate,
 };
 
 static struct clk mshc_clk = {
-	.name = "mshc_clk",
 	.parent = &hclk,
 	.round_rate = _clk_parent_round_rate,
 	.set_rate = _clk_parent_set_rate,
 };
 
 static struct clk ssi_clk = {
-	.name = "ssi_clk",
 	.parent = &perclk[2],
 	.round_rate = _clk_parent_round_rate,
 	.set_rate = _clk_parent_set_rate,
 };
 
 static struct clk rtc_clk = {
-	.name = "rtc_clk",
 	.parent = &clk32,
 };
 
-static struct clk *mxc_clks[] = {
-	&clk16m,
-	&clk32,
-	&clk32_premult,
-	&prem_clk,
-	&system_clk,
-	&mcu_clk,
-	&fclk,
-	&hclk,
-	&clk48m,
-	&perclk[0],
-	&perclk[1],
-	&perclk[2],
-	&clko_clk,
-	&dma_clk,
-	&csi_clk,
-	&mma_clk,
-	&usbd_clk,
-	&gpt_clk,
-	&uart_clk,
-	&i2c_clk,
-	&spi_clk,
-	&sdhc_clk,
-	&lcdc_clk,
-	&mshc_clk,
-	&ssi_clk,
-	&rtc_clk,
+#define _REGISTER_CLOCK(d, n, c) \
+	{ \
+		.dev_id = d, \
+		.con_id = n, \
+		.clk = &c, \
+	},
+static struct clk_lookup lookups[] __initdata = {
+	_REGISTER_CLOCK(NULL, "dma", dma_clk)
+	_REGISTER_CLOCK("mx1-camera.0", NULL, csi_clk)
+	_REGISTER_CLOCK(NULL, "mma", mma_clk)
+	_REGISTER_CLOCK("imx_udc.0", NULL, usbd_clk)
+	_REGISTER_CLOCK(NULL, "gpt", gpt_clk)
+	_REGISTER_CLOCK("imx-uart.0", NULL, uart_clk)
+	_REGISTER_CLOCK("imx-uart.1", NULL, uart_clk)
+	_REGISTER_CLOCK("imx-uart.2", NULL, uart_clk)
+	_REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk)
+	_REGISTER_CLOCK("spi_imx.0", NULL, spi_clk)
+	_REGISTER_CLOCK("imx-mmc.0", NULL, sdhc_clk)
+	_REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk)
+	_REGISTER_CLOCK(NULL, "mshc", mshc_clk)
+	_REGISTER_CLOCK(NULL, "ssi", ssi_clk)
+	_REGISTER_CLOCK("mxc_rtc.0", NULL, rtc_clk)
 };
 
 int __init mx1_clocks_init(unsigned long fref)
 {
-	struct clk **clkp;
 	unsigned int reg;
+	int i;
 
 	/* disable clocks we are able to */
 	__raw_writel(0, SCM_GCCR);
@@ -620,8 +592,8 @@ int __init mx1_clocks_init(unsigned long fref)
 	reg = (reg & CCM_CSCR_CLKO_MASK) >> CCM_CSCR_CLKO_OFFSET;
 	clko_clk.parent = (struct clk *)clko_clocks[reg];
 
-	for (clkp = mxc_clks; clkp < mxc_clks + ARRAY_SIZE(mxc_clks); clkp++)
-		clk_register(*clkp);
+	for (i = 0; i < ARRAY_SIZE(lookups); i++)
+		clkdev_add(&lookups[i]);
 
 	clk_enable(&hclk);
 	clk_enable(&fclk);
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index 8986b741223..0617c19f85c 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -9,6 +9,7 @@ choice
 config ARCH_MX1
 	bool "MX1-based"
 	select CPU_ARM920T
+	select COMMON_CLKDEV
 	help
 	  This enables support for systems based on the Freescale i.MX1 family
 
-- 
cgit v1.2.3


From 5e63ff9a973a19b78bb0eef22df8946b36e09f0f Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Sat, 7 Feb 2009 13:37:29 +0100
Subject: [ARM] MXC: remove the now unused #ifndef CONFIG_COMMON_CLKDEV

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/clock.c | 154 ----------------------------------------------
 1 file changed, 154 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-mxc/clock.c b/arch/arm/plat-mxc/clock.c
index f653213b741..9e8fbd57495 100644
--- a/arch/arm/plat-mxc/clock.c
+++ b/arch/arm/plat-mxc/clock.c
@@ -48,76 +48,6 @@ static DEFINE_MUTEX(clocks_mutex);
  * Standard clock functions defined in include/linux/clk.h
  *-------------------------------------------------------------------------*/
 
-/*
- * All the code inside #ifndef CONFIG_COMMON_CLKDEV can be removed once all
- * MXC architectures have switched to using clkdev.
- */
-#ifndef CONFIG_COMMON_CLKDEV
-/*
- * Retrieve a clock by name.
- *
- * Note that we first try to use device id on the bus
- * and clock name. If this fails, we try to use "<name>.<id>". If this fails,
- * we try to use clock name only.
- * The reference count to the clock's module owner ref count is incremented.
- */
-struct clk *clk_get(struct device *dev, const char *id)
-{
-	struct clk *p, *clk = ERR_PTR(-ENOENT);
-	int idno;
-	const char *str;
-
-	if (id == NULL)
-		return clk;
-
-	if (dev == NULL || dev->bus != &platform_bus_type)
-		idno = -1;
-	else
-		idno = to_platform_device(dev)->id;
-
-	mutex_lock(&clocks_mutex);
-
-	list_for_each_entry(p, &clocks, node) {
-		if (p->id == idno &&
-		    strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
-			clk = p;
-			goto found;
-		}
-	}
-
-	str = strrchr(id, '.');
-	if (str) {
-		int cnt = str - id;
-		str++;
-		idno = simple_strtol(str, NULL, 10);
-		list_for_each_entry(p, &clocks, node) {
-			if (p->id == idno &&
-			    strlen(p->name) == cnt &&
-			    strncmp(id, p->name, cnt) == 0 &&
-			    try_module_get(p->owner)) {
-				clk = p;
-				goto found;
-			}
-		}
-	}
-
-	list_for_each_entry(p, &clocks, node) {
-		if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
-			clk = p;
-			goto found;
-		}
-	}
-
-	printk(KERN_WARNING "clk: Unable to get requested clock: %s\n", id);
-
-found:
-	mutex_unlock(&clocks_mutex);
-
-	return clk;
-}
-EXPORT_SYMBOL(clk_get);
-#endif
-
 static void __clk_disable(struct clk *clk)
 {
 	if (clk == NULL || IS_ERR(clk))
@@ -194,16 +124,6 @@ unsigned long clk_get_rate(struct clk *clk)
 }
 EXPORT_SYMBOL(clk_get_rate);
 
-#ifndef CONFIG_COMMON_CLKDEV
-/* Decrement the clock's module reference count */
-void clk_put(struct clk *clk)
-{
-	if (clk && !IS_ERR(clk))
-		module_put(clk->owner);
-}
-EXPORT_SYMBOL(clk_put);
-#endif
-
 /* Round the requested clock rate to the nearest supported
  * rate that is less than or equal to the requested rate.
  * This is dependent on the clock's current parent.
@@ -266,80 +186,6 @@ struct clk *clk_get_parent(struct clk *clk)
 }
 EXPORT_SYMBOL(clk_get_parent);
 
-#ifndef CONFIG_COMMON_CLKDEV
-/*
- * Add a new clock to the clock tree.
- */
-int clk_register(struct clk *clk)
-{
-	if (clk == NULL || IS_ERR(clk))
-		return -EINVAL;
-
-	mutex_lock(&clocks_mutex);
-	list_add(&clk->node, &clocks);
-	mutex_unlock(&clocks_mutex);
-
-	return 0;
-}
-EXPORT_SYMBOL(clk_register);
-
-/* Remove a clock from the clock tree */
-void clk_unregister(struct clk *clk)
-{
-	if (clk == NULL || IS_ERR(clk))
-		return;
-
-	mutex_lock(&clocks_mutex);
-	list_del(&clk->node);
-	mutex_unlock(&clocks_mutex);
-}
-EXPORT_SYMBOL(clk_unregister);
-
-#ifdef CONFIG_PROC_FS
-static int mxc_clock_read_proc(char *page, char **start, off_t off,
-				int count, int *eof, void *data)
-{
-	struct clk *clkp;
-	char *p = page;
-	int len;
-
-	list_for_each_entry(clkp, &clocks, node) {
-		p += sprintf(p, "%s-%d:\t\t%lu, %d", clkp->name, clkp->id,
-				clk_get_rate(clkp), clkp->usecount);
-		if (clkp->parent)
-			p += sprintf(p, ", %s-%d\n", clkp->parent->name,
-				     clkp->parent->id);
-		else
-			p += sprintf(p, "\n");
-	}
-
-	len = (p - page) - off;
-	if (len < 0)
-		len = 0;
-
-	*eof = (len <= count) ? 1 : 0;
-	*start = page + off;
-
-	return len;
-}
-
-static int __init mxc_setup_proc_entry(void)
-{
-	struct proc_dir_entry *res;
-
-	res = create_proc_read_entry("cpu/clocks", 0, NULL,
-				     mxc_clock_read_proc, NULL);
-	if (!res) {
-		printk(KERN_ERR "Failed to create proc/cpu/clocks\n");
-		return -ENOMEM;
-	}
-	return 0;
-}
-
-late_initcall(mxc_setup_proc_entry);
-#endif /* CONFIG_PROC_FS */
-#endif
-
 /*
  * Get the resulting clock rate from a PLL register value and the input
  * frequency. PLLs with this register layout can at least be found on
-- 
cgit v1.2.3


From c13a482c43a148c2b8060b405fc39a4b214d56d2 Mon Sep 17 00:00:00 2001
From: Daniel Mack <daniel@caiaq.de>
Date: Thu, 25 Jun 2009 14:11:50 +0200
Subject: MX3: Add USB platform devices and resources

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/devices.c | 65 +++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/mach-mx3/devices.h |  3 +++
 2 files changed, 68 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
index 7a5c2ef52a4..4e728a29196 100644
--- a/arch/arm/mach-mx3/devices.c
+++ b/arch/arm/mach-mx3/devices.c
@@ -390,6 +390,71 @@ struct platform_device mxc_otg_udc_device = {
 	.num_resources	= ARRAY_SIZE(otg_resources),
 };
 
+/* OTG host */
+struct platform_device mxc_otg_host = {
+	.name = "mxc-ehci",
+	.id = 0,
+	.dev = {
+		.coherent_dma_mask = 0xffffffff,
+		.dma_mask = &otg_dmamask,
+	},
+	.resource = otg_resources,
+	.num_resources = ARRAY_SIZE(otg_resources),
+};
+
+/* USB host 1 */
+
+static u64 usbh1_dmamask = ~(u32)0;
+
+static struct resource mxc_usbh1_resources[] = {
+	{
+		.start = OTG_BASE_ADDR + 0x200,
+		.end = OTG_BASE_ADDR + 0x3ff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC_INT_USB1,
+		.end = MXC_INT_USB1,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_usbh1 = {
+	.name = "mxc-ehci",
+	.id = 1,
+	.dev = {
+		.coherent_dma_mask = 0xffffffff,
+		.dma_mask = &usbh1_dmamask,
+	},
+	.resource = mxc_usbh1_resources,
+	.num_resources = ARRAY_SIZE(mxc_usbh1_resources),
+};
+
+/* USB host 2 */
+static u64 usbh2_dmamask = ~(u32)0;
+
+static struct resource mxc_usbh2_resources[] = {
+	{
+		.start = OTG_BASE_ADDR + 0x400,
+		.end = OTG_BASE_ADDR + 0x5ff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC_INT_USB2,
+		.end = MXC_INT_USB2,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_usbh2 = {
+	.name = "mxc-ehci",
+	.id = 2,
+	.dev = {
+		.coherent_dma_mask = 0xffffffff,
+		.dma_mask = &usbh2_dmamask,
+	},
+	.resource = mxc_usbh2_resources,
+	.num_resources = ARRAY_SIZE(mxc_usbh2_resources),
+};
+
 #ifdef CONFIG_ARCH_MX35
 static struct resource mxc_fec_resources[] = {
 	{
diff --git a/arch/arm/mach-mx3/devices.h b/arch/arm/mach-mx3/devices.h
index ffd494ddd4a..81614319755 100644
--- a/arch/arm/mach-mx3/devices.h
+++ b/arch/arm/mach-mx3/devices.h
@@ -16,5 +16,8 @@ extern struct platform_device mxc_fec_device;
 extern struct platform_device mxcsdhc_device0;
 extern struct platform_device mxcsdhc_device1;
 extern struct platform_device mxc_otg_udc_device;
+extern struct platform_device mxc_otg_host;
+extern struct platform_device mxc_usbh1;
+extern struct platform_device mxc_usbh2;
 extern struct platform_device mxc_rnga_device;
 
-- 
cgit v1.2.3


From 6558f985a1ff7ab2b413f49ee8766c919495e0ac Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Thu, 25 Jun 2009 14:11:51 +0200
Subject: ehci mxc: Fix clocks

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/clock.c | 6 ++++++
 1 file changed, 6 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock.c
index 25b6f55bfb0..2b29491c22b 100644
--- a/arch/arm/mach-mx3/clock.c
+++ b/arch/arm/mach-mx3/clock.c
@@ -532,6 +532,12 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("ipu-core", NULL, ipu_clk)
 	_REGISTER_CLOCK("mx3_sdc_fb", NULL, ipu_clk)
 	_REGISTER_CLOCK(NULL, "kpp", kpp_clk)
+	_REGISTER_CLOCK("mxc-ehci.0", "usb", usb_clk1)
+	_REGISTER_CLOCK("mxc-ehci.0", "usb_ahb", usb_clk2)
+	_REGISTER_CLOCK("mxc-ehci.1", "usb", usb_clk1)
+	_REGISTER_CLOCK("mxc-ehci.1", "usb_ahb", usb_clk2)
+	_REGISTER_CLOCK("mxc-ehci.2", "usb", usb_clk1)
+	_REGISTER_CLOCK("mxc-ehci.2", "usb_ahb", usb_clk2)
 	_REGISTER_CLOCK("fsl-usb2-udc", "usb", usb_clk1)
 	_REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", usb_clk2)
 	_REGISTER_CLOCK("mx3-camera.0", NULL, csi_clk)
-- 
cgit v1.2.3


From 88e29a8d21fb9687ad6972a44571b295acaf0d74 Mon Sep 17 00:00:00 2001
From: Daniel Mack <daniel@caiaq.de>
Date: Thu, 25 Jun 2009 14:11:52 +0200
Subject: MX3: add additional USB pins to iomux

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/include/mach/iomux-mx3.h | 13 +++++++++++++
 1 file changed, 13 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
index 2eb182f7387..a3b206ce78b 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
@@ -635,6 +635,19 @@ enum iomux_pins {
 #define MX31_PIN_USBOTG_DIR__USBOTG_DIR        IOMUX_MODE(MX31_PIN_USBOTG_DIR, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_USBOTG_NXT__USBOTG_NXT        IOMUX_MODE(MX31_PIN_USBOTG_NXT, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_USBOTG_STP__USBOTG_STP        IOMUX_MODE(MX31_PIN_USBOTG_STP, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSPI1_MOSI__USBH1_RXDM        IOMUX_MODE(MX31_PIN_CSPI1_MOSI, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI1_MISO__USBH1_RXDP        IOMUX_MODE(MX31_PIN_CSPI1_MISO, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI1_SS0__USBH1_TXDM         IOMUX_MODE(MX31_PIN_CSPI1_SS0,  IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI1_SS1__USBH1_TXDP         IOMUX_MODE(MX31_PIN_CSPI1_SS1,  IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI1_SS2__USBH1_RCV          IOMUX_MODE(MX31_PIN_CSPI1_SS2,  IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI1_SCLK__USBH1_OEB         IOMUX_MODE(MX31_PIN_CSPI1_SCLK, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI1_SPI_RDY__USBH1_FS       IOMUX_MODE(MX31_PIN_CSPI1_SPI_RDY, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_USBH2_DATA0__USBH2_DATA0      IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBH2_DATA1__USBH2_DATA1      IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBH2_CLK__USBH2_CLK          IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBH2_DIR__USBH2_DIR          IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBH2_NXT__USBH2_NXT          IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBH2_STP__USBH2_STP          IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_USB_OC__GPIO1_30	IOMUX_MODE(MX31_PIN_USB_OC, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_I2C_DAT__I2C1_SDA	IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_I2C_CLK__I2C1_SCL	IOMUX_MODE(MX31_PIN_I2C_CLK, IOMUX_CONFIG_FUNC)
-- 
cgit v1.2.3


From 627fb3b9d260cb413d0ea2d179e319a20e2bd82b Mon Sep 17 00:00:00 2001
From: javier Martin <javier.martin@vista-silicon.com>
Date: Wed, 15 Jul 2009 15:26:21 +0200
Subject: MX27: Add USB platform devices and resources

This adds clocks and resources for usb in i.mx27 SoC.

Signed-off-by: Javier Martin <javier.martin@vista-silicon.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx2/clock_imx27.c |  9 +++-
 arch/arm/mach-mx2/devices.c     | 92 +++++++++++++++++++++++++++++++++++++++++
 arch/arm/mach-mx2/devices.h     |  4 ++
 3 files changed, 104 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-mx2/clock_imx27.c b/arch/arm/mach-mx2/clock_imx27.c
index a0c577f80d4..4089951acb4 100644
--- a/arch/arm/mach-mx2/clock_imx27.c
+++ b/arch/arm/mach-mx2/clock_imx27.c
@@ -643,7 +643,14 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK(NULL, "cspi3", cspi3_clk)
 	_REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk)
 	_REGISTER_CLOCK(NULL, "csi", csi_clk)
-	_REGISTER_CLOCK(NULL, "usb", usb_clk)
+	_REGISTER_CLOCK("fsl-usb2-udc", "usb", usb_clk)
+	_REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", usb_clk1)
+	_REGISTER_CLOCK("mxc-ehci.0", "usb", usb_clk)
+	_REGISTER_CLOCK("mxc-ehci.0", "usb_ahb", usb_clk1)
+	_REGISTER_CLOCK("mxc-ehci.1", "usb", usb_clk)
+	_REGISTER_CLOCK("mxc-ehci.1", "usb_ahb", usb_clk1)
+	_REGISTER_CLOCK("mxc-ehci.2", "usb", usb_clk)
+	_REGISTER_CLOCK("mxc-ehci.2", "usb_ahb", usb_clk1)
 	_REGISTER_CLOCK(NULL, "ssi1", ssi1_clk)
 	_REGISTER_CLOCK(NULL, "ssi2", ssi2_clk)
 	_REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
diff --git a/arch/arm/mach-mx2/devices.c b/arch/arm/mach-mx2/devices.c
index cbf42467466..4ecf0977beb 100644
--- a/arch/arm/mach-mx2/devices.c
+++ b/arch/arm/mach-mx2/devices.c
@@ -369,6 +369,98 @@ struct platform_device mxc_sdhc_device1 = {
        .resource       = mxc_sdhc2_resources,
 };
 
+static struct resource otg_resources[] = {
+	{
+		.start	= OTG_BASE_ADDR,
+		.end	= OTG_BASE_ADDR + 0x1ff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= MXC_INT_USB3,
+		.end	= MXC_INT_USB3,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static u64 otg_dmamask = 0xffffffffUL;
+
+/* OTG gadget device */
+struct platform_device mxc_otg_udc_device = {
+	.name		= "fsl-usb2-udc",
+	.id		= -1,
+	.dev		= {
+		.dma_mask		= &otg_dmamask,
+		.coherent_dma_mask	= 0xffffffffUL,
+	},
+	.resource	= otg_resources,
+	.num_resources	= ARRAY_SIZE(otg_resources),
+};
+
+/* OTG host */
+struct platform_device mxc_otg_host = {
+	.name = "mxc-ehci",
+	.id = 0,
+	.dev = {
+		.coherent_dma_mask = 0xffffffff,
+		.dma_mask = &otg_dmamask,
+	},
+	.resource = otg_resources,
+	.num_resources = ARRAY_SIZE(otg_resources),
+};
+
+/* USB host 1 */
+
+static u64 usbh1_dmamask = 0xffffffffUL;
+
+static struct resource mxc_usbh1_resources[] = {
+	{
+		.start = OTG_BASE_ADDR + 0x200,
+		.end = OTG_BASE_ADDR + 0x3ff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC_INT_USB1,
+		.end = MXC_INT_USB1,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_usbh1 = {
+	.name = "mxc-ehci",
+	.id = 1,
+	.dev = {
+		.coherent_dma_mask = 0xffffffff,
+		.dma_mask = &usbh1_dmamask,
+	},
+	.resource = mxc_usbh1_resources,
+	.num_resources = ARRAY_SIZE(mxc_usbh1_resources),
+};
+
+/* USB host 2 */
+static u64 usbh2_dmamask = 0xffffffffUL;
+
+static struct resource mxc_usbh2_resources[] = {
+	{
+		.start = OTG_BASE_ADDR + 0x400,
+		.end = OTG_BASE_ADDR + 0x5ff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC_INT_USB2,
+		.end = MXC_INT_USB2,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_usbh2 = {
+	.name = "mxc-ehci",
+	.id = 2,
+	.dev = {
+		.coherent_dma_mask = 0xffffffff,
+		.dma_mask = &usbh2_dmamask,
+	},
+	.resource = mxc_usbh2_resources,
+	.num_resources = ARRAY_SIZE(mxc_usbh2_resources),
+};
+
+
 /* GPIO port description */
 static struct mxc_gpio_port imx_gpio_ports[] = {
 	{
diff --git a/arch/arm/mach-mx2/devices.h b/arch/arm/mach-mx2/devices.h
index c79ba7fed1b..6e91b4e3509 100644
--- a/arch/arm/mach-mx2/devices.h
+++ b/arch/arm/mach-mx2/devices.h
@@ -19,3 +19,7 @@ extern struct platform_device mxc_i2c_device0;
 extern struct platform_device mxc_i2c_device1;
 extern struct platform_device mxc_sdhc_device0;
 extern struct platform_device mxc_sdhc_device1;
+extern struct platform_device mxc_otg_udc_device;
+extern struct platform_device mxc_otg_host;
+extern struct platform_device mxc_usbh1;
+extern struct platform_device mxc_usbh2;
-- 
cgit v1.2.3


From af5b1df7136570dae9ac4c1cd193053c61b0ed8f Mon Sep 17 00:00:00 2001
From: Eric Benard <eric@eukrea.com>
Date: Thu, 16 Jul 2009 16:26:33 +0200
Subject: Add support for Eukrea's CPUIMX27

CPUIMX27 is built around Freescale's i.MX27 and has up to 64MB of
 NOR Flash, up to 512MB of NAND Flash and up to 256MB of mDDR,
 it includes an ethernet PHY in MII mode, an I2C RTC and a
 ST16554 QuadUART on nCS3.

Signed-off-by: Eric Benard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx2/Kconfig                          |  14 ++
 arch/arm/mach-mx2/Makefile                         |   2 +-
 arch/arm/mach-mx2/eukrea_cpuimx27.c                | 235 +++++++++++++++++++++
 .../plat-mxc/include/mach/board-eukrea_cpuimx27.h  |  25 +++
 4 files changed, 275 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/mach-mx2/eukrea_cpuimx27.c
 create mode 100644 arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx27.h

(limited to 'arch')

diff --git a/arch/arm/mach-mx2/Kconfig b/arch/arm/mach-mx2/Kconfig
index c77da586b71..2c2be3953d8 100644
--- a/arch/arm/mach-mx2/Kconfig
+++ b/arch/arm/mach-mx2/Kconfig
@@ -53,6 +53,20 @@ config MACH_PCM970_BASEBOARD
 
 endchoice
 
+config MACH_EUKREA_CPUIMX27
+	bool "Eukrea CPUIMX27 module"
+	depends on MACH_MX27
+	help
+	  Include support for Eukrea CPUIMX27 platform. This includes
+	  specific configurations for the module and its peripherals.
+
+config MACH_EUKREA_CPUIMX27_USESDHC2
+	bool "CPUIMX27 integrates SDHC2 module"
+	depends on MACH_EUKREA_CPUIMX27
+	help
+	  This adds support for the internal SDHC2 used on CPUIMX27 used
+	  for wifi or eMMC.
+
 config MACH_MX27_3DS
 	bool "MX27PDK platform"
 	depends on MACH_MX27
diff --git a/arch/arm/mach-mx2/Makefile b/arch/arm/mach-mx2/Makefile
index b9b1cca4e9b..e12490f670d 100644
--- a/arch/arm/mach-mx2/Makefile
+++ b/arch/arm/mach-mx2/Makefile
@@ -17,4 +17,4 @@ obj-$(CONFIG_MACH_PCM038) += pcm038.o
 obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o
 obj-$(CONFIG_MACH_MX27_3DS) += mx27pdk.o
 obj-$(CONFIG_MACH_MX27LITE) += mx27lite.o
-
+obj-$(CONFIG_MACH_EUKREA_CPUIMX27) += eukrea_cpuimx27.o
diff --git a/arch/arm/mach-mx2/eukrea_cpuimx27.c b/arch/arm/mach-mx2/eukrea_cpuimx27.c
new file mode 100644
index 00000000000..a2c4181892c
--- /dev/null
+++ b/arch/arm/mach-mx2/eukrea_cpuimx27.c
@@ -0,0 +1,235 @@
+/*
+ * Copyright (C) 2009 Eric Benard - eric@eukrea.com
+ *
+ * Based on pcm038.c which is :
+ * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/mtd/plat-ram.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+
+#include <mach/board-eukrea_cpuimx27.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/i2c.h>
+#include <mach/iomux.h>
+#include <mach/imx-uart.h>
+#include <mach/mxc_nand.h>
+
+#include "devices.h"
+
+static int eukrea_cpuimx27_pins[] = {
+	/* UART1 */
+	PE12_PF_UART1_TXD,
+	PE13_PF_UART1_RXD,
+	PE14_PF_UART1_CTS,
+	PE15_PF_UART1_RTS,
+	/* UART4 */
+	PB26_AF_UART4_RTS,
+	PB28_AF_UART4_TXD,
+	PB29_AF_UART4_CTS,
+	PB31_AF_UART4_RXD,
+	/* FEC */
+	PD0_AIN_FEC_TXD0,
+	PD1_AIN_FEC_TXD1,
+	PD2_AIN_FEC_TXD2,
+	PD3_AIN_FEC_TXD3,
+	PD4_AOUT_FEC_RX_ER,
+	PD5_AOUT_FEC_RXD1,
+	PD6_AOUT_FEC_RXD2,
+	PD7_AOUT_FEC_RXD3,
+	PD8_AF_FEC_MDIO,
+	PD9_AIN_FEC_MDC,
+	PD10_AOUT_FEC_CRS,
+	PD11_AOUT_FEC_TX_CLK,
+	PD12_AOUT_FEC_RXD0,
+	PD13_AOUT_FEC_RX_DV,
+	PD14_AOUT_FEC_RX_CLK,
+	PD15_AOUT_FEC_COL,
+	PD16_AIN_FEC_TX_ER,
+	PF23_AIN_FEC_TX_EN,
+	/* I2C1 */
+	PD17_PF_I2C_DATA,
+	PD18_PF_I2C_CLK,
+	/* SDHC2 */
+	PB4_PF_SD2_D0,
+	PB5_PF_SD2_D1,
+	PB6_PF_SD2_D2,
+	PB7_PF_SD2_D3,
+	PB8_PF_SD2_CMD,
+	PB9_PF_SD2_CLK,
+#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+	/* Quad UART's IRQ */
+	GPIO_PORTD | 22 | GPIO_GPIO | GPIO_IN,
+	GPIO_PORTD | 23 | GPIO_GPIO | GPIO_IN,
+	GPIO_PORTD | 27 | GPIO_GPIO | GPIO_IN,
+	GPIO_PORTD | 30 | GPIO_GPIO | GPIO_IN,
+#endif
+};
+
+static struct physmap_flash_data eukrea_cpuimx27_flash_data = {
+	.width = 2,
+};
+
+static struct resource eukrea_cpuimx27_flash_resource = {
+	.start = 0xc0000000,
+	.end   = 0xc3ffffff,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device eukrea_cpuimx27_nor_mtd_device = {
+	.name = "physmap-flash",
+	.id = 0,
+	.dev = {
+		.platform_data = &eukrea_cpuimx27_flash_data,
+	},
+	.num_resources = 1,
+	.resource = &eukrea_cpuimx27_flash_resource,
+};
+
+static struct imxuart_platform_data uart_pdata[] = {
+	{
+		.flags = IMXUART_HAVE_RTSCTS,
+	}, {
+		.flags = IMXUART_HAVE_RTSCTS,
+	},
+};
+
+static struct mxc_nand_platform_data eukrea_cpuimx27_nand_board_info = {
+	.width = 1,
+	.hw_ecc = 1,
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+	&eukrea_cpuimx27_nor_mtd_device,
+	&mxc_fec_device,
+};
+
+static struct imxi2c_platform_data eukrea_cpuimx27_i2c_1_data = {
+	.bitrate = 100000,
+};
+
+static struct i2c_board_info eukrea_cpuimx27_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("rtc-pcf8563", 0x51),
+		.type = "pcf8563"
+	},
+};
+
+#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+static struct plat_serial8250_port serial_platform_data[] = {
+	{
+		.mapbase = (unsigned long)(CS3_BASE_ADDR + 0x200000),
+		.irq = IRQ_GPIOB(23),
+		.uartclk = 14745600,
+		.regshift = 1,
+		.iotype = UPIO_MEM,
+		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
+	}, {
+		.mapbase = (unsigned long)(CS3_BASE_ADDR + 0x400000),
+		.irq = IRQ_GPIOB(22),
+		.uartclk = 14745600,
+		.regshift = 1,
+		.iotype = UPIO_MEM,
+		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
+	}, {
+		.mapbase = (unsigned long)(CS3_BASE_ADDR + 0x800000),
+		.irq = IRQ_GPIOB(27),
+		.uartclk = 14745600,
+		.regshift = 1,
+		.iotype = UPIO_MEM,
+		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
+	}, {
+		.mapbase = (unsigned long)(CS3_BASE_ADDR + 0x1000000),
+		.irq = IRQ_GPIOB(30),
+		.uartclk = 14745600,
+		.regshift = 1,
+		.iotype = UPIO_MEM,
+		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
+	}, {
+	}
+};
+
+static struct platform_device serial_device = {
+	.name = "serial8250",
+	.id = 0,
+	.dev = {
+		.platform_data = serial_platform_data,
+	},
+};
+#endif
+
+static void __init eukrea_cpuimx27_init(void)
+{
+	mxc_gpio_setup_multiple_pins(eukrea_cpuimx27_pins,
+		ARRAY_SIZE(eukrea_cpuimx27_pins), "CPUIMX27");
+
+	mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
+
+	mxc_register_device(&mxc_nand_device, &eukrea_cpuimx27_nand_board_info);
+
+	i2c_register_board_info(0, eukrea_cpuimx27_i2c_devices,
+				ARRAY_SIZE(eukrea_cpuimx27_i2c_devices));
+
+	mxc_register_device(&mxc_i2c_device0, &eukrea_cpuimx27_i2c_1_data);
+
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+
+#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2)
+	/* SDHC2 can be used for Wifi */
+	mxc_register_device(&mxc_sdhc_device1, NULL);
+	/* in which case UART4 is also used for Bluetooth */
+	mxc_register_device(&mxc_uart_device3, &uart_pdata[1]);
+#endif
+
+#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+	platform_device_register(&serial_device);
+#endif
+
+#ifdef CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD
+	eukrea_mbimx27_baseboard_init();
+#endif
+}
+
+static void __init eukrea_cpuimx27_timer_init(void)
+{
+	mx27_clocks_init(26000000);
+}
+
+static struct sys_timer eukrea_cpuimx27_timer = {
+	.init = eukrea_cpuimx27_timer_init,
+};
+
+MACHINE_START(CPUIMX27, "EUKREA CPUIMX27")
+	.phys_io        = AIPI_BASE_ADDR,
+	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = PHYS_OFFSET + 0x100,
+	.map_io         = mx27_map_io,
+	.init_irq       = mx27_init_irq,
+	.init_machine   = eukrea_cpuimx27_init,
+	.timer          = &eukrea_cpuimx27_timer,
+MACHINE_END
diff --git a/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx27.h b/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx27.h
new file mode 100644
index 00000000000..91bcce65469
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx27.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2009 Eric Benard - eric@eukrea.com
+ *
+ * Based on board-pcm038.h which is :
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_EUKREA_CPUIMX27_H__
+#define __ASM_ARCH_MXC_BOARD_EUKREA_CPUIMX27_H__
+
+#endif /* __ASM_ARCH_MXC_BOARD_EUKREA_CPUIMX27_H__ */
-- 
cgit v1.2.3


From a961bf380b93741c2191f8efc8f5f1c65224b216 Mon Sep 17 00:00:00 2001
From: Eric Benard <eric@eukrea.com>
Date: Thu, 16 Jul 2009 16:26:34 +0200
Subject: Add support for Eukrea's MBIMX27

MBIMX27 is the evaluation board for CPUIMX27 and integrates : a
QVGA TFT, a SPI touchscreen controler, a SDCard connector wired to
SDHC1.

Signed-off-by: Eric Benard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx2/Kconfig                          |  14 ++
 arch/arm/mach-mx2/Makefile                         |   1 +
 arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c       | 249 +++++++++++++++++++++
 .../plat-mxc/include/mach/board-eukrea_cpuimx27.h  |  15 ++
 4 files changed, 279 insertions(+)
 create mode 100644 arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c

(limited to 'arch')

diff --git a/arch/arm/mach-mx2/Kconfig b/arch/arm/mach-mx2/Kconfig
index 2c2be3953d8..0c28a37bc14 100644
--- a/arch/arm/mach-mx2/Kconfig
+++ b/arch/arm/mach-mx2/Kconfig
@@ -67,6 +67,20 @@ config MACH_EUKREA_CPUIMX27_USESDHC2
 	  This adds support for the internal SDHC2 used on CPUIMX27 used
 	  for wifi or eMMC.
 
+choice
+	prompt "Baseboard"
+	depends on MACH_EUKREA_CPUIMX27
+	default MACH_EUKREA_MBIMX27_BASEBOARD
+
+config MACH_EUKREA_MBIMX27_BASEBOARD
+	prompt "Eukrea MBIMX27 development board"
+	bool
+	help
+	  This adds board specific devices that can be found on Eukrea's
+	  MBIMX27 evaluation board.
+
+endchoice
+
 config MACH_MX27_3DS
 	bool "MX27PDK platform"
 	depends on MACH_MX27
diff --git a/arch/arm/mach-mx2/Makefile b/arch/arm/mach-mx2/Makefile
index e12490f670d..8b6846c4226 100644
--- a/arch/arm/mach-mx2/Makefile
+++ b/arch/arm/mach-mx2/Makefile
@@ -18,3 +18,4 @@ obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o
 obj-$(CONFIG_MACH_MX27_3DS) += mx27pdk.o
 obj-$(CONFIG_MACH_MX27LITE) += mx27lite.o
 obj-$(CONFIG_MACH_EUKREA_CPUIMX27) += eukrea_cpuimx27.o
+obj-$(CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD) += eukrea_mbimx27-baseboard.o
diff --git a/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c b/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c
new file mode 100644
index 00000000000..7382b6d27ee
--- /dev/null
+++ b/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c
@@ -0,0 +1,249 @@
+/*
+ * Copyright (C) 2009 Eric Benard - eric@eukrea.com
+ *
+ * Based on pcm970-baseboard.c which is :
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+
+#include <asm/mach/arch.h>
+
+#include <mach/common.h>
+#include <mach/iomux.h>
+#include <mach/imxfb.h>
+#include <mach/hardware.h>
+#include <mach/mmc.h>
+#include <mach/imx-uart.h>
+
+#include "devices.h"
+
+static int eukrea_mbimx27_pins[] = {
+	/* UART2 */
+	PE3_PF_UART2_CTS,
+	PE4_PF_UART2_RTS,
+	PE6_PF_UART2_TXD,
+	PE7_PF_UART2_RXD,
+	/* UART3 */
+	PE8_PF_UART3_TXD,
+	PE9_PF_UART3_RXD,
+	PE10_PF_UART3_CTS,
+	PE11_PF_UART3_RTS,
+	/* UART4 */
+	PB26_AF_UART4_RTS,
+	PB28_AF_UART4_TXD,
+	PB29_AF_UART4_CTS,
+	PB31_AF_UART4_RXD,
+	/* SDHC1*/
+	PE18_PF_SD1_D0,
+	PE19_PF_SD1_D1,
+	PE20_PF_SD1_D2,
+	PE21_PF_SD1_D3,
+	PE22_PF_SD1_CMD,
+	PE23_PF_SD1_CLK,
+	/* display */
+	PA5_PF_LSCLK,
+	PA6_PF_LD0,
+	PA7_PF_LD1,
+	PA8_PF_LD2,
+	PA9_PF_LD3,
+	PA10_PF_LD4,
+	PA11_PF_LD5,
+	PA12_PF_LD6,
+	PA13_PF_LD7,
+	PA14_PF_LD8,
+	PA15_PF_LD9,
+	PA16_PF_LD10,
+	PA17_PF_LD11,
+	PA18_PF_LD12,
+	PA19_PF_LD13,
+	PA20_PF_LD14,
+	PA21_PF_LD15,
+	PA22_PF_LD16,
+	PA23_PF_LD17,
+	PA28_PF_HSYNC,
+	PA29_PF_VSYNC,
+	PA30_PF_CONTRAST,
+	PA31_PF_OE_ACD,
+	/* SPI1 */
+	PD28_PF_CSPI1_SS0,
+	PD29_PF_CSPI1_SCLK,
+	PD30_PF_CSPI1_MISO,
+	PD31_PF_CSPI1_MOSI,
+};
+
+static struct gpio_led gpio_leds[] = {
+	{
+		.name			= "led1",
+		.default_trigger	= "heartbeat",
+		.active_low		= 1,
+		.gpio			= GPIO_PORTF | 16,
+	},
+	{
+		.name			= "led2",
+		.default_trigger	= "none",
+		.active_low		= 1,
+		.gpio			= GPIO_PORTF | 19,
+	},
+	{
+		.name			= "backlight",
+		.default_trigger	= "backlight",
+		.active_low		= 0,
+		.gpio			= GPIO_PORTE | 5,
+	},
+};
+
+static struct gpio_led_platform_data gpio_led_info = {
+	.leds		= gpio_leds,
+	.num_leds	= ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device leds_gpio = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &gpio_led_info,
+	},
+};
+
+static struct imx_fb_videomode eukrea_mbimx27_modes[] = {
+	{
+		.mode = {
+			.name		= "CMO-QGVA",
+			.refresh	= 60,
+			.xres		= 320,
+			.yres		= 240,
+			.pixclock	= 156000,
+			.hsync_len	= 30,
+			.left_margin	= 38,
+			.right_margin	= 20,
+			.vsync_len	= 3,
+			.upper_margin	= 15,
+			.lower_margin	= 4,
+		},
+		.pcr		= 0xFAD08B80,
+		.bpp		= 16,
+	},
+};
+
+static struct imx_fb_platform_data eukrea_mbimx27_fb_data = {
+	.mode = eukrea_mbimx27_modes,
+	.num_modes = ARRAY_SIZE(eukrea_mbimx27_modes),
+
+	.pwmr		= 0x00A903FF,
+	.lscr1		= 0x00120300,
+	.dmacr		= 0x00040060,
+};
+
+static struct imxuart_platform_data uart_pdata[] = {
+	{
+		.flags = IMXUART_HAVE_RTSCTS,
+	},
+	{
+		.flags = IMXUART_HAVE_RTSCTS,
+	},
+};
+
+#if defined(CONFIG_TOUCHSCREEN_ADS7846)
+	|| defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+
+#define ADS7846_PENDOWN (GPIO_PORTD | 25)
+
+static void ads7846_dev_init(void)
+{
+	if (gpio_request(ADS7846_PENDOWN, "ADS7846 pendown") < 0) {
+		printk(KERN_ERR "can't get ads746 pen down GPIO\n");
+		return;
+	}
+
+	gpio_direction_input(ADS7846_PENDOWN);
+}
+
+static int ads7846_get_pendown_state(void)
+{
+	return !gpio_get_value(ADS7846_PENDOWN);
+}
+
+static struct ads7846_platform_data ads7846_config __initdata = {
+	.get_pendown_state	= ads7846_get_pendown_state,
+	.keep_vref_on		= 1,
+};
+
+static struct spi_board_info eukrea_mbimx27_spi_board_info[] __initdata = {
+	[0] = {
+		.modalias	= "ads7846",
+		.bus_num	= 0,
+		.chip_select	= 0,
+		.max_speed_hz	= 1500000,
+		.irq		= IRQ_GPIOD(25),
+		.platform_data	= &ads7846_config,
+		.mode           = SPI_MODE_2,
+	},
+};
+
+static int eukrea_mbimx27_spi_cs[] = {GPIO_PORTD | 28};
+
+static struct spi_imx_master eukrea_mbimx27_spi_0_data = {
+	.chipselect	= eukrea_mbimx27_spi_cs,
+	.num_chipselect = ARRAY_SIZE(eukrea_mbimx27_spi_cs),
+};
+#endif
+
+static struct platform_device *platform_devices[] __initdata = {
+	&leds_gpio,
+};
+
+/*
+ * system init for baseboard usage. Will be called by cpuimx27 init.
+ *
+ * Add platform devices present on this baseboard and init
+ * them from CPU side as far as required to use them later on
+ */
+void __init eukrea_mbimx27_baseboard_init(void)
+{
+	mxc_gpio_setup_multiple_pins(eukrea_mbimx27_pins,
+		ARRAY_SIZE(eukrea_mbimx27_pins), "MBIMX27");
+
+	mxc_register_device(&mxc_uart_device1, &uart_pdata[0]);
+	mxc_register_device(&mxc_uart_device2, &uart_pdata[1]);
+
+	mxc_register_device(&mxc_fb_device, &eukrea_mbimx27_fb_data);
+	mxc_register_device(&mxc_sdhc_device0, NULL);
+
+#if defined(CONFIG_TOUCHSCREEN_ADS7846)
+	|| defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+	/* SPI and ADS7846 Touchscreen controler init */
+	mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
+	mxc_gpio_mode(GPIO_PORTD | 25 | GPIO_GPIO | GPIO_IN);
+	mxc_register_device(&mxc_spi_device0, &eukrea_mbimx27_spi_0_data);
+	spi_register_board_info(eukrea_mbimx27_spi_board_info,
+			ARRAY_SIZE(eukrea_mbimx27_spi_board_info));
+	ads7846_dev_init();
+#endif
+
+	/* Leds configuration */
+	mxc_gpio_mode(GPIO_PORTF | 16 | GPIO_GPIO | GPIO_OUT);
+	mxc_gpio_mode(GPIO_PORTF | 19 | GPIO_GPIO | GPIO_OUT);
+	/* Backlight */
+	mxc_gpio_mode(GPIO_PORTE | 5 | GPIO_GPIO | GPIO_OUT);
+
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
diff --git a/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx27.h b/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx27.h
index 91bcce65469..a1fd5830af4 100644
--- a/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx27.h
+++ b/arch/arm/plat-mxc/include/mach/board-eukrea_cpuimx27.h
@@ -22,4 +22,19 @@
 #ifndef __ASM_ARCH_MXC_BOARD_EUKREA_CPUIMX27_H__
 #define __ASM_ARCH_MXC_BOARD_EUKREA_CPUIMX27_H__
 
+#ifndef __ASSEMBLY__
+/*
+ * This CPU module needs a baseboard to work. After basic initializing
+ * its own devices, it calls baseboard's init function.
+ * TODO: Add your own baseboard init function and call it from
+ * inside eukrea_cpuimx27_init().
+ *
+ * This example here is for the development board. Refer
+ * eukrea_mbimx27-baseboard.c
+ */
+
+extern void eukrea_mbimx27_baseboard_init(void);
+
+#endif
+
 #endif /* __ASM_ARCH_MXC_BOARD_EUKREA_CPUIMX27_H__ */
-- 
cgit v1.2.3


From f3d1915a8623b9248572d3ee44e19a80b7a3520b Mon Sep 17 00:00:00 2001
From: Cyrill Gorcunov <gorcunov@gmail.com>
Date: Thu, 6 Aug 2009 00:09:31 +0400
Subject: x86, ioapic: Panic on irq-pin binding only if needed

Though the most time we are to panic on irq-pin allocation
fails, for PCI interrupts it's not the case and we could
continue operate even if irq-pin allocation failed.

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <20090805200931.GB5319@lenovo>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/apic/io_apic.c | 23 ++++++++++++++++++-----
 1 file changed, 18 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 2a145d3a837..2999f3dd588 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -490,7 +490,8 @@ static void ioapic_mask_entry(int apic, int pin)
  * shared ISA-space IRQs, so we have to support them. We are super
  * fast in the common case, and fast for shared ISA-space IRQs.
  */
-static void add_pin_to_irq_node(struct irq_cfg *cfg, int node, int apic, int pin)
+static int
+add_pin_to_irq_node_nopanic(struct irq_cfg *cfg, int node, int apic, int pin)
 {
 	struct irq_pin_list **last, *entry;
 
@@ -498,19 +499,27 @@ static void add_pin_to_irq_node(struct irq_cfg *cfg, int node, int apic, int pin
 	last = &cfg->irq_2_pin;
 	for_each_irq_pin(entry, cfg->irq_2_pin) {
 		if (entry->apic == apic && entry->pin == pin)
-			return;
+			return 0;
 		last = &entry->next;
 	}
 
 	entry = get_one_free_irq_2_pin(node);
 	if (!entry) {
-		printk(KERN_ERR "can not alloc irq_pin_list\n");
-		BUG_ON(1);
+		printk(KERN_ERR "can not alloc irq_pin_list (%d,%d,%d)\n",
+				node, apic, pin);
+		return -ENOMEM;
 	}
 	entry->apic = apic;
 	entry->pin = pin;
 
 	*last = entry;
+	return 0;
+}
+
+static void add_pin_to_irq_node(struct irq_cfg *cfg, int node, int apic, int pin)
+{
+	if (add_pin_to_irq_node_nopanic(cfg, node, apic, pin))
+		panic("IO-APIC: failed to add irq-pin. Can not proceed\n");
 }
 
 /*
@@ -3843,7 +3852,11 @@ static int __io_apic_set_pci_routing(struct device *dev, int irq,
 	 */
 	if (irq >= NR_IRQS_LEGACY) {
 		cfg = desc->chip_data;
-		add_pin_to_irq_node(cfg, node, ioapic, pin);
+		if (add_pin_to_irq_node_nopanic(cfg, node, ioapic, pin)) {
+			printk(KERN_INFO "can not add pin %d for irq %d\n",
+				pin, irq);
+			return 0;
+		}
 	}
 
 	setup_IO_APIC_irq(ioapic, pin, irq, desc, trigger, polarity);
-- 
cgit v1.2.3


From 1e5de18278e6862f4198412b5059a03770fa816a Mon Sep 17 00:00:00 2001
From: Akinobu Mita <akinobu.mita@gmail.com>
Date: Sun, 19 Jul 2009 00:12:20 +0900
Subject: x86: Introduce GDT_ENTRY_INIT()

GDT_ENTRY_INIT is static initializer of desc_struct.

We already have similar macro GDT_ENTRY() but it's static
initializer for u64 and it cannot be used for desc_struct.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
LKML-Reference: <20090718151219.GD11294@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/desc_defs.h      |  6 ++++++
 arch/x86/include/asm/lguest.h         |  5 +++--
 arch/x86/include/asm/stackprotector.h |  2 +-
 arch/x86/kernel/apm_32.c              |  2 +-
 arch/x86/kernel/cpu/common.c          | 40 +++++++++++++++++------------------
 5 files changed, 31 insertions(+), 24 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/desc_defs.h b/arch/x86/include/asm/desc_defs.h
index a6adefa28b9..9d6684849fd 100644
--- a/arch/x86/include/asm/desc_defs.h
+++ b/arch/x86/include/asm/desc_defs.h
@@ -34,6 +34,12 @@ struct desc_struct {
 	};
 } __attribute__((packed));
 
+#define GDT_ENTRY_INIT(flags, base, limit) { { { \
+		.a = ((limit) & 0xffff) | (((base) & 0xffff) << 16), \
+		.b = (((base) & 0xff0000) >> 16) | (((flags) & 0xf0ff) << 8) | \
+			((limit) & 0xf0000) | ((base) & 0xff000000), \
+	} } }
+
 enum {
 	GATE_INTERRUPT = 0xE,
 	GATE_TRAP = 0xF,
diff --git a/arch/x86/include/asm/lguest.h b/arch/x86/include/asm/lguest.h
index 313389cd50d..94cd69858b1 100644
--- a/arch/x86/include/asm/lguest.h
+++ b/arch/x86/include/asm/lguest.h
@@ -91,8 +91,9 @@ static inline void lguest_set_ts(void)
 }
 
 /* Full 4G segment descriptors, suitable for CS and DS. */
-#define FULL_EXEC_SEGMENT ((struct desc_struct){ { {0x0000ffff, 0x00cf9b00} } })
-#define FULL_SEGMENT ((struct desc_struct){ { {0x0000ffff, 0x00cf9300} } })
+#define FULL_EXEC_SEGMENT \
+	((struct desc_struct)GDT_ENTRY_INIT(0xc09b, 0, 0xfffff))
+#define FULL_SEGMENT ((struct desc_struct)GDT_ENTRY_INIT(0xc093, 0, 0xfffff))
 
 #endif /* __ASSEMBLY__ */
 
diff --git a/arch/x86/include/asm/stackprotector.h b/arch/x86/include/asm/stackprotector.h
index cdc5e0b126a..44efdff3975 100644
--- a/arch/x86/include/asm/stackprotector.h
+++ b/arch/x86/include/asm/stackprotector.h
@@ -48,7 +48,7 @@
  * head_32 for boot CPU and setup_per_cpu_areas() for others.
  */
 #define GDT_STACK_CANARY_INIT						\
-	[GDT_ENTRY_STACK_CANARY] = { { { 0x00000018, 0x00409000 } } },
+	[GDT_ENTRY_STACK_CANARY] = GDT_ENTRY_INIT(0x4090, 0, 0x18),
 
 /*
  * Initialize the stackprotector canary value.
diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c
index b5e841bd60d..febb2dab254 100644
--- a/arch/x86/kernel/apm_32.c
+++ b/arch/x86/kernel/apm_32.c
@@ -403,7 +403,7 @@ static DECLARE_WAIT_QUEUE_HEAD(apm_waitqueue);
 static DECLARE_WAIT_QUEUE_HEAD(apm_suspend_waitqueue);
 static struct apm_user *user_list;
 static DEFINE_SPINLOCK(user_list_lock);
-static struct desc_struct bad_bios_desc = { { { 0, 0x00409200 } } };
+static struct desc_struct bad_bios_desc = GDT_ENTRY_INIT(0x4092, 0, 0);
 
 static const char driver_version[] = "1.16ac";	/* no spaces */
 
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index f1961c07af9..8c9bc287f8f 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -71,45 +71,45 @@ DEFINE_PER_CPU_PAGE_ALIGNED(struct gdt_page, gdt_page) = { .gdt = {
 	 * TLS descriptors are currently at a different place compared to i386.
 	 * Hopefully nobody expects them at a fixed place (Wine?)
 	 */
-	[GDT_ENTRY_KERNEL32_CS]		= { { { 0x0000ffff, 0x00cf9b00 } } },
-	[GDT_ENTRY_KERNEL_CS]		= { { { 0x0000ffff, 0x00af9b00 } } },
-	[GDT_ENTRY_KERNEL_DS]		= { { { 0x0000ffff, 0x00cf9300 } } },
-	[GDT_ENTRY_DEFAULT_USER32_CS]	= { { { 0x0000ffff, 0x00cffb00 } } },
-	[GDT_ENTRY_DEFAULT_USER_DS]	= { { { 0x0000ffff, 0x00cff300 } } },
-	[GDT_ENTRY_DEFAULT_USER_CS]	= { { { 0x0000ffff, 0x00affb00 } } },
+	[GDT_ENTRY_KERNEL32_CS]		= GDT_ENTRY_INIT(0xc09b, 0, 0xfffff),
+	[GDT_ENTRY_KERNEL_CS]		= GDT_ENTRY_INIT(0xa09b, 0, 0xfffff),
+	[GDT_ENTRY_KERNEL_DS]		= GDT_ENTRY_INIT(0xc093, 0, 0xfffff),
+	[GDT_ENTRY_DEFAULT_USER32_CS]	= GDT_ENTRY_INIT(0xc0fb, 0, 0xfffff),
+	[GDT_ENTRY_DEFAULT_USER_DS]	= GDT_ENTRY_INIT(0xc0f3, 0, 0xfffff),
+	[GDT_ENTRY_DEFAULT_USER_CS]	= GDT_ENTRY_INIT(0xa0fb, 0, 0xfffff),
 #else
-	[GDT_ENTRY_KERNEL_CS]		= { { { 0x0000ffff, 0x00cf9a00 } } },
-	[GDT_ENTRY_KERNEL_DS]		= { { { 0x0000ffff, 0x00cf9200 } } },
-	[GDT_ENTRY_DEFAULT_USER_CS]	= { { { 0x0000ffff, 0x00cffa00 } } },
-	[GDT_ENTRY_DEFAULT_USER_DS]	= { { { 0x0000ffff, 0x00cff200 } } },
+	[GDT_ENTRY_KERNEL_CS]		= GDT_ENTRY_INIT(0xc09a, 0, 0xfffff),
+	[GDT_ENTRY_KERNEL_DS]		= GDT_ENTRY_INIT(0xc092, 0, 0xfffff),
+	[GDT_ENTRY_DEFAULT_USER_CS]	= GDT_ENTRY_INIT(0xc0fa, 0, 0xfffff),
+	[GDT_ENTRY_DEFAULT_USER_DS]	= GDT_ENTRY_INIT(0xc0f2, 0, 0xfffff),
 	/*
 	 * Segments used for calling PnP BIOS have byte granularity.
 	 * They code segments and data segments have fixed 64k limits,
 	 * the transfer segment sizes are set at run time.
 	 */
 	/* 32-bit code */
-	[GDT_ENTRY_PNPBIOS_CS32]	= { { { 0x0000ffff, 0x00409a00 } } },
+	[GDT_ENTRY_PNPBIOS_CS32]	= GDT_ENTRY_INIT(0x409a, 0, 0xffff),
 	/* 16-bit code */
-	[GDT_ENTRY_PNPBIOS_CS16]	= { { { 0x0000ffff, 0x00009a00 } } },
+	[GDT_ENTRY_PNPBIOS_CS16]	= GDT_ENTRY_INIT(0x009a, 0, 0xffff),
 	/* 16-bit data */
-	[GDT_ENTRY_PNPBIOS_DS]		= { { { 0x0000ffff, 0x00009200 } } },
+	[GDT_ENTRY_PNPBIOS_DS]		= GDT_ENTRY_INIT(0x0092, 0, 0xffff),
 	/* 16-bit data */
-	[GDT_ENTRY_PNPBIOS_TS1]		= { { { 0x00000000, 0x00009200 } } },
+	[GDT_ENTRY_PNPBIOS_TS1]		= GDT_ENTRY_INIT(0x0092, 0, 0),
 	/* 16-bit data */
-	[GDT_ENTRY_PNPBIOS_TS2]		= { { { 0x00000000, 0x00009200 } } },
+	[GDT_ENTRY_PNPBIOS_TS2]		= GDT_ENTRY_INIT(0x0092, 0, 0),
 	/*
 	 * The APM segments have byte granularity and their bases
 	 * are set at run time.  All have 64k limits.
 	 */
 	/* 32-bit code */
-	[GDT_ENTRY_APMBIOS_BASE]	= { { { 0x0000ffff, 0x00409a00 } } },
+	[GDT_ENTRY_APMBIOS_BASE]	= GDT_ENTRY_INIT(0x409a, 0, 0xffff),
 	/* 16-bit code */
-	[GDT_ENTRY_APMBIOS_BASE+1]	= { { { 0x0000ffff, 0x00009a00 } } },
+	[GDT_ENTRY_APMBIOS_BASE+1]	= GDT_ENTRY_INIT(0x009a, 0, 0xffff),
 	/* data */
-	[GDT_ENTRY_APMBIOS_BASE+2]	= { { { 0x0000ffff, 0x00409200 } } },
+	[GDT_ENTRY_APMBIOS_BASE+2]	= GDT_ENTRY_INIT(0x409a, 0, 0xffff),
 
-	[GDT_ENTRY_ESPFIX_SS]		= { { { 0x0000ffff, 0x00cf9200 } } },
-	[GDT_ENTRY_PERCPU]		= { { { 0x0000ffff, 0x00cf9200 } } },
+	[GDT_ENTRY_ESPFIX_SS]		= GDT_ENTRY_INIT(0xc092, 0, 0xfffff),
+	[GDT_ENTRY_PERCPU]		= GDT_ENTRY_INIT(0xc092, 0, 0xfffff),
 	GDT_STACK_CANARY_INIT
 #endif
 } };
-- 
cgit v1.2.3


From 72c4d8530244264317a662de9a55cc47e6c8e9df Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Mon, 3 Aug 2009 08:47:07 +0200
Subject: x86: Introduce GDT_ENTRY_INIT(), fix APM

This crash:

[    0.891983] calling  cache_sysfs_init+0x0/0x1ee @ 1
[    0.897251] initcall cache_sysfs_init+0x0/0x1ee returned 0 after 405 usecs
[    0.904019] calling  mce_init_device+0x0/0x242 @ 1
[    0.909124] initcall mce_init_device+0x0/0x242 returned 0 after 347 usecs
[    0.915815] calling  apm_init+0x0/0x38d @ 1
[    0.919967] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[    0.926813] general protection fault: 0000 [#1]
[    0.927269] last sysfs file:
[    0.927269] Modules linked in:
[    0.927269]
[    0.927269] Pid: 271, comm: kapmd Not tainted (2.6.31-rc3-00100-gd520da1-dirty #311) System Product Name
[    0.927269] EIP: 00c0:[<000082b2>] EFLAGS: 00010002 CPU: 0
[    0.927269] EIP is at 0x82b2
[    0.927269] EAX: 0000530e EBX: 00000000 ECX: 00000102 EDX: 00000000
[    0.927269] ESI: 00000000 EDI: f6a4bf44 EBP: 67890000 ESP: f6a4beec
[    0.927269]  DS: 00c8 ES: 0000 FS: 0000 GS: 0000 SS: 0068
[    0.927269] Process kapmd (pid: 271, ti=f6a4a000 task=f7142280 task.ti=f6a4a000)
[    0.927269] Stack:
[    0.927269]  0000828d 02160000 00b88092 f6a4bf3c c102a63d 00000060 f6a4bf3c f6a4bf44
[    0.927269] <0> 0000007b 0000007b 00000000 00000000 00000000 00000000 560aae9e 00000000
[    0.927269] <0> 00000200 f705fd74 00000000 c102af70 f6a4bf60 c102a6ec 0000530e 00000000
[    0.927269] Call Trace:
[    0.927269]  [<c102a63d>] ? __apm_bios_call_simple+0x7d/0x110
[    0.927269]  [<c102af70>] ? apm+0x0/0x6a0
[    0.927269]  [<c102a6ec>] ? apm_bios_call_simple+0x1c/0x50
[    0.927269]  [<c102b3f5>] ? apm+0x485/0x6a0
[    0.927269]  [<c1038e7a>] ? finish_task_switch+0x2a/0xb0
[    0.927269]  [<c164a69e>] ? schedule+0x31e/0x480
[    0.927269]  [<c102af70>] ? apm+0x0/0x6a0
[    0.927269]  [<c102af70>] ? apm+0x0/0x6a0
[    0.927269]  [<c1052654>] ? kthread+0x74/0x80
[    0.927269]  [<c10525e0>] ? kthread+0x0/0x80
[    0.927269]  [<c101d627>] ? kernel_thread_helper+0x7/0x10
[    0.927269] Code:  Bad EIP value.
[    0.927269] EIP: [<000082b2>] 0x82b2 SS:ESP 0068:f6a4beec
[    0.927269] ---[ end trace a7919e7f17c0a725 ]---
[    0.927269] Kernel panic - not syncing: Fatal exception
[    0.927269] Pid: 271, comm: kapmd Tainted: G      D    2.6.31-rc3-00100-gd520da1-dirty #311

Is caused by an incorrect GDT_ENTRY_INIT() conversion in the apm
code, as noticed by hpa.

Reported-by: Ingo Molnar <mingo@elte.hu>
Noticed-by: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
LKML-Reference: <20090808094905.GA2954@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/common.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 8c9bc287f8f..b5764a26964 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -106,7 +106,7 @@ DEFINE_PER_CPU_PAGE_ALIGNED(struct gdt_page, gdt_page) = { .gdt = {
 	/* 16-bit code */
 	[GDT_ENTRY_APMBIOS_BASE+1]	= GDT_ENTRY_INIT(0x009a, 0, 0xffff),
 	/* data */
-	[GDT_ENTRY_APMBIOS_BASE+2]	= GDT_ENTRY_INIT(0x409a, 0, 0xffff),
+	[GDT_ENTRY_APMBIOS_BASE+2]	= GDT_ENTRY_INIT(0x4092, 0, 0xffff),
 
 	[GDT_ENTRY_ESPFIX_SS]		= GDT_ENTRY_INIT(0xc092, 0, 0xfffff),
 	[GDT_ENTRY_PERCPU]		= GDT_ENTRY_INIT(0xc092, 0, 0xfffff),
-- 
cgit v1.2.3


From 4c711576b90cc36c13b94816a953a8de6a53d03c Mon Sep 17 00:00:00 2001
From: Amerigo Wang <amwang@redhat.com>
Date: Thu, 6 Aug 2009 15:58:12 -0700
Subject: x86, 32-bit: Use generic sys_pipe()

As suggested by Al, it's better to use the generic sys_pipe() for ia32.

Signed-off-by: WANG Cong <amwang@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/ia32/ia32entry.S |  2 +-
 arch/x86/ia32/sys_ia32.c  | 14 --------------
 2 files changed, 1 insertion(+), 15 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S
index e590261ba05..ba331bfd111 100644
--- a/arch/x86/ia32/ia32entry.S
+++ b/arch/x86/ia32/ia32entry.S
@@ -537,7 +537,7 @@ ia32_sys_call_table:
 	.quad sys_mkdir
 	.quad sys_rmdir		/* 40 */
 	.quad sys_dup
-	.quad sys32_pipe
+	.quad sys_pipe
 	.quad compat_sys_times
 	.quad quiet_ni_syscall			/* old prof syscall holder */
 	.quad sys_brk		/* 45 */
diff --git a/arch/x86/ia32/sys_ia32.c b/arch/x86/ia32/sys_ia32.c
index 085a8c35f14..9f552719882 100644
--- a/arch/x86/ia32/sys_ia32.c
+++ b/arch/x86/ia32/sys_ia32.c
@@ -189,20 +189,6 @@ asmlinkage long sys32_mprotect(unsigned long start, size_t len,
 	return sys_mprotect(start, len, prot);
 }
 
-asmlinkage long sys32_pipe(int __user *fd)
-{
-	int retval;
-	int fds[2];
-
-	retval = do_pipe_flags(fds, 0);
-	if (retval)
-		goto out;
-	if (copy_to_user(fd, fds, sizeof(fds)))
-		retval = -EFAULT;
-out:
-	return retval;
-}
-
 asmlinkage long sys32_rt_sigaction(int sig, struct sigaction32 __user *act,
 				   struct sigaction32 __user *oact,
 				   unsigned int sigsetsize)
-- 
cgit v1.2.3


From 30dd568c912602b7dbd609a45d053e01b13422bb Mon Sep 17 00:00:00 2001
From: Markus Metzger <markus.t.metzger@intel.com>
Date: Tue, 21 Jul 2009 15:56:48 +0200
Subject: x86, perf_counter, bts: Add BTS support to perfcounters

Implement a performance counter with:

    attr.type           = PERF_TYPE_HARDWARE
    attr.config         = PERF_COUNT_HW_BRANCH_INSTRUCTIONS
    attr.sample_period  = 1

Using branch trace store (BTS) on x86 hardware, if available.

The from and to address for each branch can be sampled using:

    PERF_SAMPLE_IP      for the from address
    PERF_SAMPLE_ADDR    for the to address

[ v2: address review feedback, fix bugs ]

Signed-off-by: Markus Metzger <markus.t.metzger@intel.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/perf_counter.h |  10 ++
 arch/x86/kernel/cpu/perf_counter.c  | 325 +++++++++++++++++++++++++++++++++++-
 2 files changed, 329 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/perf_counter.h b/arch/x86/include/asm/perf_counter.h
index fa64e401589..e7b7c938ae2 100644
--- a/arch/x86/include/asm/perf_counter.h
+++ b/arch/x86/include/asm/perf_counter.h
@@ -84,6 +84,16 @@ union cpuid10_edx {
 #define MSR_ARCH_PERFMON_FIXED_CTR2			0x30b
 #define X86_PMC_IDX_FIXED_BUS_CYCLES			(X86_PMC_IDX_FIXED + 2)
 
+/*
+ * We model BTS tracing as another fixed-mode PMC.
+ *
+ * We choose a value in the middle of the fixed counter range, since lower
+ * values are used by actual fixed counters and higher values are used
+ * to indicate other overflow conditions in the PERF_GLOBAL_STATUS msr.
+ */
+#define X86_PMC_IDX_FIXED_BTS				(X86_PMC_IDX_FIXED + 16)
+
+
 #ifdef CONFIG_PERF_COUNTERS
 extern void init_hw_perf_counters(void);
 extern void perf_counters_lapic_init(void);
diff --git a/arch/x86/kernel/cpu/perf_counter.c b/arch/x86/kernel/cpu/perf_counter.c
index a7aa8f90095..b237c181aa4 100644
--- a/arch/x86/kernel/cpu/perf_counter.c
+++ b/arch/x86/kernel/cpu/perf_counter.c
@@ -6,6 +6,7 @@
  *  Copyright (C) 2009 Jaswinder Singh Rajput
  *  Copyright (C) 2009 Advanced Micro Devices, Inc., Robert Richter
  *  Copyright (C) 2008-2009 Red Hat, Inc., Peter Zijlstra <pzijlstr@redhat.com>
+ *  Copyright (C) 2009 Intel Corporation, <markus.t.metzger@intel.com>
  *
  *  For licencing details see kernel-base/COPYING
  */
@@ -20,6 +21,7 @@
 #include <linux/sched.h>
 #include <linux/uaccess.h>
 #include <linux/highmem.h>
+#include <linux/cpu.h>
 
 #include <asm/apic.h>
 #include <asm/stacktrace.h>
@@ -27,12 +29,52 @@
 
 static u64 perf_counter_mask __read_mostly;
 
+/* The maximal number of PEBS counters: */
+#define MAX_PEBS_COUNTERS	4
+
+/* The size of a BTS record in bytes: */
+#define BTS_RECORD_SIZE		24
+
+/* The size of a per-cpu BTS buffer in bytes: */
+#define BTS_BUFFER_SIZE		(BTS_RECORD_SIZE * 1024)
+
+/* The BTS overflow threshold in bytes from the end of the buffer: */
+#define BTS_OVFL_TH		(BTS_RECORD_SIZE * 64)
+
+
+/*
+ * Bits in the debugctlmsr controlling branch tracing.
+ */
+#define X86_DEBUGCTL_TR			(1 << 6)
+#define X86_DEBUGCTL_BTS		(1 << 7)
+#define X86_DEBUGCTL_BTINT		(1 << 8)
+#define X86_DEBUGCTL_BTS_OFF_OS		(1 << 9)
+#define X86_DEBUGCTL_BTS_OFF_USR	(1 << 10)
+
+/*
+ * A debug store configuration.
+ *
+ * We only support architectures that use 64bit fields.
+ */
+struct debug_store {
+	u64	bts_buffer_base;
+	u64	bts_index;
+	u64	bts_absolute_maximum;
+	u64	bts_interrupt_threshold;
+	u64	pebs_buffer_base;
+	u64	pebs_index;
+	u64	pebs_absolute_maximum;
+	u64	pebs_interrupt_threshold;
+	u64	pebs_counter_reset[MAX_PEBS_COUNTERS];
+};
+
 struct cpu_hw_counters {
 	struct perf_counter	*counters[X86_PMC_IDX_MAX];
 	unsigned long		used_mask[BITS_TO_LONGS(X86_PMC_IDX_MAX)];
 	unsigned long		active_mask[BITS_TO_LONGS(X86_PMC_IDX_MAX)];
 	unsigned long		interrupts;
 	int			enabled;
+	struct debug_store	*ds;
 };
 
 /*
@@ -57,6 +99,8 @@ struct x86_pmu {
 	u64		counter_mask;
 	u64		max_period;
 	u64		intel_ctrl;
+	void		(*enable_bts)(u64 config);
+	void		(*disable_bts)(void);
 };
 
 static struct x86_pmu x86_pmu __read_mostly;
@@ -576,6 +620,9 @@ x86_perf_counter_update(struct perf_counter *counter,
 	u64 prev_raw_count, new_raw_count;
 	s64 delta;
 
+	if (idx == X86_PMC_IDX_FIXED_BTS)
+		return 0;
+
 	/*
 	 * Careful: an NMI might modify the previous counter value.
 	 *
@@ -659,10 +706,109 @@ static void release_pmc_hardware(void)
 		enable_lapic_nmi_watchdog();
 }
 
+static inline bool bts_available(void)
+{
+	return x86_pmu.enable_bts != NULL;
+}
+
+static inline void init_debug_store_on_cpu(int cpu)
+{
+	struct debug_store *ds = per_cpu(cpu_hw_counters, cpu).ds;
+
+	if (!ds)
+		return;
+
+	wrmsr_on_cpu(cpu, MSR_IA32_DS_AREA,
+		     (u32)((u64)(long)ds), (u32)((u64)(long)ds >> 32));
+}
+
+static inline void fini_debug_store_on_cpu(int cpu)
+{
+	if (!per_cpu(cpu_hw_counters, cpu).ds)
+		return;
+
+	wrmsr_on_cpu(cpu, MSR_IA32_DS_AREA, 0, 0);
+}
+
+static void release_bts_hardware(void)
+{
+	int cpu;
+
+	if (!bts_available())
+		return;
+
+	get_online_cpus();
+
+	for_each_online_cpu(cpu)
+		fini_debug_store_on_cpu(cpu);
+
+	for_each_possible_cpu(cpu) {
+		struct debug_store *ds = per_cpu(cpu_hw_counters, cpu).ds;
+
+		if (!ds)
+			continue;
+
+		per_cpu(cpu_hw_counters, cpu).ds = NULL;
+
+		kfree((void *)(long)ds->bts_buffer_base);
+		kfree(ds);
+	}
+
+	put_online_cpus();
+}
+
+static int reserve_bts_hardware(void)
+{
+	int cpu, err = 0;
+
+	if (!bts_available())
+		return -EOPNOTSUPP;
+
+	get_online_cpus();
+
+	for_each_possible_cpu(cpu) {
+		struct debug_store *ds;
+		void *buffer;
+
+		err = -ENOMEM;
+		buffer = kzalloc(BTS_BUFFER_SIZE, GFP_KERNEL);
+		if (unlikely(!buffer))
+			break;
+
+		ds = kzalloc(sizeof(*ds), GFP_KERNEL);
+		if (unlikely(!ds)) {
+			kfree(buffer);
+			break;
+		}
+
+		ds->bts_buffer_base = (u64)(long)buffer;
+		ds->bts_index = ds->bts_buffer_base;
+		ds->bts_absolute_maximum =
+			ds->bts_buffer_base + BTS_BUFFER_SIZE;
+		ds->bts_interrupt_threshold =
+			ds->bts_absolute_maximum - BTS_OVFL_TH;
+
+		per_cpu(cpu_hw_counters, cpu).ds = ds;
+		err = 0;
+	}
+
+	if (err)
+		release_bts_hardware();
+	else {
+		for_each_online_cpu(cpu)
+			init_debug_store_on_cpu(cpu);
+	}
+
+	put_online_cpus();
+
+	return err;
+}
+
 static void hw_perf_counter_destroy(struct perf_counter *counter)
 {
 	if (atomic_dec_and_mutex_lock(&active_counters, &pmc_reserve_mutex)) {
 		release_pmc_hardware();
+		release_bts_hardware();
 		mutex_unlock(&pmc_reserve_mutex);
 	}
 }
@@ -705,6 +851,42 @@ set_ext_hw_attr(struct hw_perf_counter *hwc, struct perf_counter_attr *attr)
 	return 0;
 }
 
+static void intel_pmu_enable_bts(u64 config)
+{
+	unsigned long debugctlmsr;
+
+	debugctlmsr = get_debugctlmsr();
+
+	debugctlmsr |= X86_DEBUGCTL_TR;
+	debugctlmsr |= X86_DEBUGCTL_BTS;
+	debugctlmsr |= X86_DEBUGCTL_BTINT;
+
+	if (!(config & ARCH_PERFMON_EVENTSEL_OS))
+		debugctlmsr |= X86_DEBUGCTL_BTS_OFF_OS;
+
+	if (!(config & ARCH_PERFMON_EVENTSEL_USR))
+		debugctlmsr |= X86_DEBUGCTL_BTS_OFF_USR;
+
+	update_debugctlmsr(debugctlmsr);
+}
+
+static void intel_pmu_disable_bts(void)
+{
+	struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters);
+	unsigned long debugctlmsr;
+
+	if (!cpuc->ds)
+		return;
+
+	debugctlmsr = get_debugctlmsr();
+
+	debugctlmsr &=
+		~(X86_DEBUGCTL_TR | X86_DEBUGCTL_BTS | X86_DEBUGCTL_BTINT |
+		  X86_DEBUGCTL_BTS_OFF_OS | X86_DEBUGCTL_BTS_OFF_USR);
+
+	update_debugctlmsr(debugctlmsr);
+}
+
 /*
  * Setup the hardware configuration for a given attr_type
  */
@@ -721,9 +903,13 @@ static int __hw_perf_counter_init(struct perf_counter *counter)
 	err = 0;
 	if (!atomic_inc_not_zero(&active_counters)) {
 		mutex_lock(&pmc_reserve_mutex);
-		if (atomic_read(&active_counters) == 0 && !reserve_pmc_hardware())
-			err = -EBUSY;
-		else
+		if (atomic_read(&active_counters) == 0) {
+			if (!reserve_pmc_hardware())
+				err = -EBUSY;
+			else
+				reserve_bts_hardware();
+		}
+		if (!err)
 			atomic_inc(&active_counters);
 		mutex_unlock(&pmc_reserve_mutex);
 	}
@@ -801,7 +987,18 @@ static void p6_pmu_disable_all(void)
 
 static void intel_pmu_disable_all(void)
 {
+	struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters);
+
+	if (!cpuc->enabled)
+		return;
+
+	cpuc->enabled = 0;
+	barrier();
+
 	wrmsrl(MSR_CORE_PERF_GLOBAL_CTRL, 0);
+
+	if (test_bit(X86_PMC_IDX_FIXED_BTS, cpuc->active_mask))
+		intel_pmu_disable_bts();
 }
 
 static void amd_pmu_disable_all(void)
@@ -859,7 +1056,25 @@ static void p6_pmu_enable_all(void)
 
 static void intel_pmu_enable_all(void)
 {
+	struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters);
+
+	if (cpuc->enabled)
+		return;
+
+	cpuc->enabled = 1;
+	barrier();
+
 	wrmsrl(MSR_CORE_PERF_GLOBAL_CTRL, x86_pmu.intel_ctrl);
+
+	if (test_bit(X86_PMC_IDX_FIXED_BTS, cpuc->active_mask)) {
+		struct perf_counter *counter =
+			cpuc->counters[X86_PMC_IDX_FIXED_BTS];
+
+		if (WARN_ON_ONCE(!counter))
+			return;
+
+		intel_pmu_enable_bts(counter->hw.config);
+	}
 }
 
 static void amd_pmu_enable_all(void)
@@ -946,6 +1161,11 @@ p6_pmu_disable_counter(struct hw_perf_counter *hwc, int idx)
 static inline void
 intel_pmu_disable_counter(struct hw_perf_counter *hwc, int idx)
 {
+	if (unlikely(idx == X86_PMC_IDX_FIXED_BTS)) {
+		intel_pmu_disable_bts();
+		return;
+	}
+
 	if (unlikely(hwc->config_base == MSR_ARCH_PERFMON_FIXED_CTR_CTRL)) {
 		intel_pmu_disable_fixed(hwc, idx);
 		return;
@@ -974,6 +1194,9 @@ x86_perf_counter_set_period(struct perf_counter *counter,
 	s64 period = hwc->sample_period;
 	int err, ret = 0;
 
+	if (idx == X86_PMC_IDX_FIXED_BTS)
+		return 0;
+
 	/*
 	 * If we are way outside a reasoable range then just skip forward:
 	 */
@@ -1056,6 +1279,14 @@ static void p6_pmu_enable_counter(struct hw_perf_counter *hwc, int idx)
 
 static void intel_pmu_enable_counter(struct hw_perf_counter *hwc, int idx)
 {
+	if (unlikely(idx == X86_PMC_IDX_FIXED_BTS)) {
+		if (!__get_cpu_var(cpu_hw_counters).enabled)
+			return;
+
+		intel_pmu_enable_bts(hwc->config);
+		return;
+	}
+
 	if (unlikely(hwc->config_base == MSR_ARCH_PERFMON_FIXED_CTR_CTRL)) {
 		intel_pmu_enable_fixed(hwc, idx);
 		return;
@@ -1077,11 +1308,16 @@ fixed_mode_idx(struct perf_counter *counter, struct hw_perf_counter *hwc)
 {
 	unsigned int event;
 
+	event = hwc->config & ARCH_PERFMON_EVENT_MASK;
+
+	if (unlikely((event ==
+		      x86_pmu.event_map(PERF_COUNT_HW_BRANCH_INSTRUCTIONS)) &&
+		     (hwc->sample_period == 1)))
+		return X86_PMC_IDX_FIXED_BTS;
+
 	if (!x86_pmu.num_counters_fixed)
 		return -1;
 
-	event = hwc->config & ARCH_PERFMON_EVENT_MASK;
-
 	if (unlikely(event == x86_pmu.event_map(PERF_COUNT_HW_INSTRUCTIONS)))
 		return X86_PMC_IDX_FIXED_INSTRUCTIONS;
 	if (unlikely(event == x86_pmu.event_map(PERF_COUNT_HW_CPU_CYCLES)))
@@ -1102,7 +1338,25 @@ static int x86_pmu_enable(struct perf_counter *counter)
 	int idx;
 
 	idx = fixed_mode_idx(counter, hwc);
-	if (idx >= 0) {
+	if (idx == X86_PMC_IDX_FIXED_BTS) {
+		/*
+		 * Try to use BTS for branch tracing. If that is not
+		 * available, try to get a generic counter.
+		 */
+		if (unlikely(!cpuc->ds))
+			goto try_generic;
+
+		/*
+		 * Try to get the fixed counter, if that is already taken
+		 * then try to get a generic counter:
+		 */
+		if (test_and_set_bit(idx, cpuc->used_mask))
+			goto try_generic;
+
+		hwc->config_base	= 0;
+		hwc->counter_base	= 0;
+		hwc->idx		= idx;
+	} else if (idx >= 0) {
 		/*
 		 * Try to get the fixed counter, if that is already taken
 		 * then try to get a generic counter:
@@ -1213,6 +1467,45 @@ void perf_counter_print_debug(void)
 	local_irq_restore(flags);
 }
 
+static void intel_pmu_drain_bts_buffer(struct cpu_hw_counters *cpuc,
+				       struct perf_sample_data *data)
+{
+	struct debug_store *ds = cpuc->ds;
+	struct bts_record {
+		u64	from;
+		u64	to;
+		u64	flags;
+	};
+	struct perf_counter *counter = cpuc->counters[X86_PMC_IDX_FIXED_BTS];
+	unsigned long orig_ip = data->regs->ip;
+	u64 at;
+
+	if (!counter)
+		return;
+
+	if (!ds)
+		return;
+
+	for (at = ds->bts_buffer_base;
+	     at < ds->bts_index;
+	     at += sizeof(struct bts_record)) {
+		struct bts_record *rec = (struct bts_record *)(long)at;
+
+		data->regs->ip	= rec->from;
+		data->addr	= rec->to;
+
+		perf_counter_output(counter, 1, data);
+	}
+
+	ds->bts_index = ds->bts_buffer_base;
+
+	data->regs->ip	= orig_ip;
+	data->addr	= 0;
+
+	/* There's new data available. */
+	counter->pending_kill = POLL_IN;
+}
+
 static void x86_pmu_disable(struct perf_counter *counter)
 {
 	struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters);
@@ -1237,6 +1530,15 @@ static void x86_pmu_disable(struct perf_counter *counter)
 	 * that we are disabling:
 	 */
 	x86_perf_counter_update(counter, hwc, idx);
+
+	/* Drain the remaining BTS records. */
+	if (unlikely(idx == X86_PMC_IDX_FIXED_BTS)) {
+		struct perf_sample_data data;
+		struct pt_regs regs;
+
+		data.regs = &regs;
+		intel_pmu_drain_bts_buffer(cpuc, &data);
+	}
 	cpuc->counters[idx] = NULL;
 	clear_bit(idx, cpuc->used_mask);
 
@@ -1264,6 +1566,7 @@ static int intel_pmu_save_and_restart(struct perf_counter *counter)
 
 static void intel_pmu_reset(void)
 {
+	struct debug_store *ds = __get_cpu_var(cpu_hw_counters).ds;
 	unsigned long flags;
 	int idx;
 
@@ -1281,6 +1584,8 @@ static void intel_pmu_reset(void)
 	for (idx = 0; idx < x86_pmu.num_counters_fixed; idx++) {
 		checking_wrmsrl(MSR_ARCH_PERFMON_FIXED_CTR0 + idx, 0ull);
 	}
+	if (ds)
+		ds->bts_index = ds->bts_buffer_base;
 
 	local_irq_restore(flags);
 }
@@ -1346,6 +1651,7 @@ static int intel_pmu_handle_irq(struct pt_regs *regs)
 	cpuc = &__get_cpu_var(cpu_hw_counters);
 
 	perf_disable();
+	intel_pmu_drain_bts_buffer(cpuc, &data);
 	status = intel_pmu_get_status();
 	if (!status) {
 		perf_enable();
@@ -1547,6 +1853,8 @@ static struct x86_pmu intel_pmu = {
 	 * the generic counter period:
 	 */
 	.max_period		= (1ULL << 31) - 1,
+	.enable_bts		= intel_pmu_enable_bts,
+	.disable_bts		= intel_pmu_disable_bts,
 };
 
 static struct x86_pmu amd_pmu = {
@@ -1936,3 +2244,8 @@ struct perf_callchain_entry *perf_callchain(struct pt_regs *regs)
 
 	return entry;
 }
+
+void hw_perf_counter_setup_online(int cpu)
+{
+	init_debug_store_on_cpu(cpu);
+}
-- 
cgit v1.2.3


From 9f51e24ee8b5a1595b6a5ac0c2be278a16488e75 Mon Sep 17 00:00:00 2001
From: Marcin Slusarz <marcin.slusarz@gmail.com>
Date: Sun, 9 Aug 2009 21:54:00 +0200
Subject: x86: Use printk_once()

Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
LKML-Reference: <1249847649-11631-6-git-send-email-marcin.slusarz@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/irq_32.c | 5 ++---
 arch/x86/kvm/x86.c       | 7 +------
 2 files changed, 3 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/irq_32.c b/arch/x86/kernel/irq_32.c
index 3b09634a515..7d35d0fe232 100644
--- a/arch/x86/kernel/irq_32.c
+++ b/arch/x86/kernel/irq_32.c
@@ -218,7 +218,6 @@ bool handle_irq(unsigned irq, struct pt_regs *regs)
 void fixup_irqs(void)
 {
 	unsigned int irq;
-	static int warned;
 	struct irq_desc *desc;
 
 	for_each_irq_desc(irq, desc) {
@@ -236,8 +235,8 @@ void fixup_irqs(void)
 		}
 		if (desc->chip->set_affinity)
 			desc->chip->set_affinity(irq, affinity);
-		else if (desc->action && !(warned++))
-			printk("Cannot set affinity for irq %i\n", irq);
+		else if (desc->action)
+			printk_once("Cannot set affinity for irq %i\n", irq);
 	}
 
 #if 0
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index fe5474aec41..0572c90f0c8 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -2261,12 +2261,7 @@ static int emulator_cmpxchg_emulated(unsigned long addr,
 				     unsigned int bytes,
 				     struct kvm_vcpu *vcpu)
 {
-	static int reported;
-
-	if (!reported) {
-		reported = 1;
-		printk(KERN_WARNING "kvm: emulating exchange as write\n");
-	}
+	printk_once(KERN_WARNING "kvm: emulating exchange as write\n");
 #ifndef CONFIG_X86_64
 	/* guests cmpxchg8b have to be emulated atomically */
 	if (bytes == 8) {
-- 
cgit v1.2.3


From 4a15235e79f5160a34100b362af2c674d191d0a5 Mon Sep 17 00:00:00 2001
From: Wan ZongShun <mcuos.com@gmail.com>
Date: Sun, 9 Aug 2009 21:22:22 -0700
Subject: Input: add keypad driver for w90p910

Add keypad driver for the 4x4 keypad on an evaluation board based
on w90p910.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Reviewed-by: Trilok Soni <soni.trilok@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 arch/arm/mach-w90x900/include/mach/w90p910_keypad.h | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)
 create mode 100644 arch/arm/mach-w90x900/include/mach/w90p910_keypad.h

(limited to 'arch')

diff --git a/arch/arm/mach-w90x900/include/mach/w90p910_keypad.h b/arch/arm/mach-w90x900/include/mach/w90p910_keypad.h
new file mode 100644
index 00000000000..79462faaa18
--- /dev/null
+++ b/arch/arm/mach-w90x900/include/mach/w90p910_keypad.h
@@ -0,0 +1,18 @@
+#ifndef __ASM_ARCH_W90P910_KEYPAD_H
+#define __ASM_ARCH_W90P910_KEYPAD_H
+
+#include <linux/input/matrix_keypad.h>
+
+extern void mfp_set_groupi(struct device *dev);
+
+struct w90p910_keypad_platform_data {
+
+	unsigned int	prescale;
+	unsigned int	debounce;
+	unsigned int	matrix_key_rows;
+	unsigned int	matrix_key_cols;
+	unsigned int	*matrix_key_map;
+	int		matrix_key_map_size;
+};
+
+#endif /* __ASM_ARCH_W90P910_KEYPAD_H */
-- 
cgit v1.2.3


From 09113aea553cfaf074fd669cd0465daac4cea6e8 Mon Sep 17 00:00:00 2001
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Date: Sun, 9 Aug 2009 21:22:22 -0700
Subject: Input: w90p910_keypad - adjust to use definitions from
 matrix_keypad.h

Also have the driver send MSC_SCAN events as most keyboards do to aid
in updating keymap from userspace.

Tested-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 arch/arm/mach-w90x900/include/mach/w90p910_keypad.h | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-w90x900/include/mach/w90p910_keypad.h b/arch/arm/mach-w90x900/include/mach/w90p910_keypad.h
index 79462faaa18..556778e8dda 100644
--- a/arch/arm/mach-w90x900/include/mach/w90p910_keypad.h
+++ b/arch/arm/mach-w90x900/include/mach/w90p910_keypad.h
@@ -6,13 +6,10 @@
 extern void mfp_set_groupi(struct device *dev);
 
 struct w90p910_keypad_platform_data {
+	const struct matrix_keymap_data *keymap_data;
 
 	unsigned int	prescale;
 	unsigned int	debounce;
-	unsigned int	matrix_key_rows;
-	unsigned int	matrix_key_cols;
-	unsigned int	*matrix_key_map;
-	int		matrix_key_map_size;
 };
 
 #endif /* __ASM_ARCH_W90P910_KEYPAD_H */
-- 
cgit v1.2.3


From a8ad568dd8ca122aa8048ea067d3599820d1c1b4 Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Mon, 10 Aug 2009 11:53:10 +0900
Subject: dma-ops: Remove flush_write_buffers() in dma-mapping-common.h

This moves flush_write_buffers() in
asm-generic/dma-mapping-common.h to
arch/x86/kernel/pci-nommu.c.

The purpose of this patch is that, we can avoid defining NULL
flush_write_buffers() on IA64 and SPARC.

dma-mapping-common.h is used by X86 and IA64 (and SPARC soon)
but only X86 with CONFIG_X86_OOSTORE or CONFIG_X86_PPRO_FENCE
actually uses flush_write_buffers(). CONFIG_X86_OOSTORE or
CONFIG_X86_PPRO_FENCE is usable with only kernel/pci-nommu.c
(that is, not usable with other X86 IOMMU implementations such
as SWIOTLB, VT-d, etc) so we can safely move
flush_write_buffers() in asm-generic/dma-mapping-common.h to
arch/x86/kernel/pci-nommu.c.

The further discussion is:

  http://lkml.org/lkml/2009/6/28/104

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: davem@davemloft.net
Cc: tony.luck@intel.com
Cc: fenghua.yu@intel.com
LKML-Reference: <1249872797-1314-2-git-send-email-fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/pci-nommu.c | 27 ++++++++++++++++++++++-----
 1 file changed, 22 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/pci-nommu.c b/arch/x86/kernel/pci-nommu.c
index c0a4222bf62..a3933d4330c 100644
--- a/arch/x86/kernel/pci-nommu.c
+++ b/arch/x86/kernel/pci-nommu.c
@@ -79,12 +79,29 @@ static void nommu_free_coherent(struct device *dev, size_t size, void *vaddr,
 	free_pages((unsigned long)vaddr, get_order(size));
 }
 
+static void nommu_sync_single_for_device(struct device *dev,
+			dma_addr_t addr, size_t size,
+			enum dma_data_direction dir)
+{
+	flush_write_buffers();
+}
+
+
+static void nommu_sync_sg_for_device(struct device *dev,
+			struct scatterlist *sg, int nelems,
+			enum dma_data_direction dir)
+{
+	flush_write_buffers();
+}
+
 struct dma_map_ops nommu_dma_ops = {
-	.alloc_coherent	= dma_generic_alloc_coherent,
-	.free_coherent	= nommu_free_coherent,
-	.map_sg		= nommu_map_sg,
-	.map_page	= nommu_map_page,
-	.is_phys	= 1,
+	.alloc_coherent		= dma_generic_alloc_coherent,
+	.free_coherent		= nommu_free_coherent,
+	.map_sg			= nommu_map_sg,
+	.map_page		= nommu_map_page,
+	.sync_single_for_device = nommu_sync_single_for_device,
+	.sync_sg_for_device	= nommu_sync_sg_for_device,
+	.is_phys		= 1,
 };
 
 void __init no_iommu_init(void)
-- 
cgit v1.2.3


From be02ff9940c0106dea1470462401a07c5d52e086 Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Mon, 10 Aug 2009 11:53:11 +0900
Subject: IA64: Remove NULL flush_write_buffers

flush_write_buffers() in dma-mapping-common.h was removed so we
can remove NULL flush_write_buffers() in IA64.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: tony.luck@intel.com
Cc: fenghua.yu@intel.com
Cc: davem@davemloft.net
LKML-Reference: <1249872797-1314-3-git-send-email-fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/ia64/include/asm/dma-mapping.h | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/ia64/include/asm/dma-mapping.h b/arch/ia64/include/asm/dma-mapping.h
index f91829de329..8d3c79cd81e 100644
--- a/arch/ia64/include/asm/dma-mapping.h
+++ b/arch/ia64/include/asm/dma-mapping.h
@@ -44,7 +44,6 @@ static inline void dma_free_coherent(struct device *dev, size_t size,
 #define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
 
 #define get_dma_ops(dev) platform_dma_get_ops(dev)
-#define flush_write_buffers()
 
 #include <asm-generic/dma-mapping-common.h>
 
-- 
cgit v1.2.3


From bc0a14f154069cc4e42ea903c2c2b9984a94e4b7 Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Mon, 10 Aug 2009 11:53:12 +0900
Subject: sparc: Use dma_map_ops struct

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Tested-by: Robert Reif <reif@earthlink.net>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: tony.luck@intel.com
Cc: fenghua.yu@intel.com
LKML-Reference: <1249872797-1314-4-git-send-email-fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/sparc/include/asm/dma-mapping.h | 43 ++++++------------------------------
 arch/sparc/kernel/dma.c              | 16 +++++++++-----
 arch/sparc/kernel/iommu.c            | 16 +++++++++-----
 arch/sparc/kernel/pci_sun4v.c        | 14 +++++++-----
 4 files changed, 36 insertions(+), 53 deletions(-)

(limited to 'arch')

diff --git a/arch/sparc/include/asm/dma-mapping.h b/arch/sparc/include/asm/dma-mapping.h
index 204e4bf6443..893f3ecc975 100644
--- a/arch/sparc/include/asm/dma-mapping.h
+++ b/arch/sparc/include/asm/dma-mapping.h
@@ -13,36 +13,7 @@ extern int dma_set_mask(struct device *dev, u64 dma_mask);
 #define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
 #define dma_is_consistent(d, h)	(1)
 
-struct dma_ops {
-	void *(*alloc_coherent)(struct device *dev, size_t size,
-				dma_addr_t *dma_handle, gfp_t flag);
-	void (*free_coherent)(struct device *dev, size_t size,
-			      void *cpu_addr, dma_addr_t dma_handle);
-	dma_addr_t (*map_page)(struct device *dev, struct page *page,
-			       unsigned long offset, size_t size,
-			       enum dma_data_direction direction);
-	void (*unmap_page)(struct device *dev, dma_addr_t dma_addr,
-			   size_t size,
-			   enum dma_data_direction direction);
-	int (*map_sg)(struct device *dev, struct scatterlist *sg, int nents,
-		      enum dma_data_direction direction);
-	void (*unmap_sg)(struct device *dev, struct scatterlist *sg,
-			 int nhwentries,
-			 enum dma_data_direction direction);
-	void (*sync_single_for_cpu)(struct device *dev,
-				    dma_addr_t dma_handle, size_t size,
-				    enum dma_data_direction direction);
-	void (*sync_single_for_device)(struct device *dev,
-				       dma_addr_t dma_handle, size_t size,
-				       enum dma_data_direction direction);
-	void (*sync_sg_for_cpu)(struct device *dev, struct scatterlist *sg,
-				int nelems,
-				enum dma_data_direction direction);
-	void (*sync_sg_for_device)(struct device *dev,
-				   struct scatterlist *sg, int nents,
-				   enum dma_data_direction dir);
-};
-extern const struct dma_ops *dma_ops;
+extern const struct dma_map_ops *dma_ops;
 
 static inline void *dma_alloc_coherent(struct device *dev, size_t size,
 				       dma_addr_t *dma_handle, gfp_t flag)
@@ -62,40 +33,40 @@ static inline dma_addr_t dma_map_single(struct device *dev, void *cpu_addr,
 {
 	return dma_ops->map_page(dev, virt_to_page(cpu_addr),
 				 (unsigned long)cpu_addr & ~PAGE_MASK, size,
-				 direction);
+				 direction, NULL);
 }
 
 static inline void dma_unmap_single(struct device *dev, dma_addr_t dma_addr,
 				    size_t size,
 				    enum dma_data_direction direction)
 {
-	dma_ops->unmap_page(dev, dma_addr, size, direction);
+	dma_ops->unmap_page(dev, dma_addr, size, direction, NULL);
 }
 
 static inline dma_addr_t dma_map_page(struct device *dev, struct page *page,
 				      unsigned long offset, size_t size,
 				      enum dma_data_direction direction)
 {
-	return dma_ops->map_page(dev, page, offset, size, direction);
+	return dma_ops->map_page(dev, page, offset, size, direction, NULL);
 }
 
 static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
 				  size_t size,
 				  enum dma_data_direction direction)
 {
-	dma_ops->unmap_page(dev, dma_address, size, direction);
+	dma_ops->unmap_page(dev, dma_address, size, direction, NULL);
 }
 
 static inline int dma_map_sg(struct device *dev, struct scatterlist *sg,
 			     int nents, enum dma_data_direction direction)
 {
-	return dma_ops->map_sg(dev, sg, nents, direction);
+	return dma_ops->map_sg(dev, sg, nents, direction, NULL);
 }
 
 static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
 				int nents, enum dma_data_direction direction)
 {
-	dma_ops->unmap_sg(dev, sg, nents, direction);
+	dma_ops->unmap_sg(dev, sg, nents, direction, NULL);
 }
 
 static inline void dma_sync_single_for_cpu(struct device *dev,
diff --git a/arch/sparc/kernel/dma.c b/arch/sparc/kernel/dma.c
index 524c32f97c5..473a3fc7ab5 100644
--- a/arch/sparc/kernel/dma.c
+++ b/arch/sparc/kernel/dma.c
@@ -60,7 +60,8 @@ static void dma32_free_coherent(struct device *dev, size_t size,
 
 static dma_addr_t dma32_map_page(struct device *dev, struct page *page,
 				 unsigned long offset, size_t size,
-				 enum dma_data_direction direction)
+				 enum dma_data_direction direction,
+				 struct dma_attrs *attrs)
 {
 #ifdef CONFIG_PCI
 	if (dev->bus == &pci_bus_type)
@@ -72,7 +73,8 @@ static dma_addr_t dma32_map_page(struct device *dev, struct page *page,
 }
 
 static void dma32_unmap_page(struct device *dev, dma_addr_t dma_address,
-			     size_t size, enum dma_data_direction direction)
+			     size_t size, enum dma_data_direction direction,
+			     struct dma_attrs *attrs)
 {
 #ifdef CONFIG_PCI
 	if (dev->bus == &pci_bus_type) {
@@ -85,7 +87,8 @@ static void dma32_unmap_page(struct device *dev, dma_addr_t dma_address,
 }
 
 static int dma32_map_sg(struct device *dev, struct scatterlist *sg,
-			int nents, enum dma_data_direction direction)
+			int nents, enum dma_data_direction direction,
+			struct dma_attrs *attrs)
 {
 #ifdef CONFIG_PCI
 	if (dev->bus == &pci_bus_type)
@@ -95,7 +98,8 @@ static int dma32_map_sg(struct device *dev, struct scatterlist *sg,
 }
 
 void dma32_unmap_sg(struct device *dev, struct scatterlist *sg,
-		    int nents, enum dma_data_direction direction)
+		    int nents, enum dma_data_direction direction,
+		    struct dma_attrs *attrs)
 {
 #ifdef CONFIG_PCI
 	if (dev->bus == &pci_bus_type) {
@@ -161,7 +165,7 @@ static void dma32_sync_sg_for_device(struct device *dev,
 	BUG();
 }
 
-static const struct dma_ops dma32_dma_ops = {
+static const struct dma_map_ops dma32_dma_ops = {
 	.alloc_coherent		= dma32_alloc_coherent,
 	.free_coherent		= dma32_free_coherent,
 	.map_page		= dma32_map_page,
@@ -174,5 +178,5 @@ static const struct dma_ops dma32_dma_ops = {
 	.sync_sg_for_device	= dma32_sync_sg_for_device,
 };
 
-const struct dma_ops *dma_ops = &dma32_dma_ops;
+const struct dma_map_ops *dma_ops = &dma32_dma_ops;
 EXPORT_SYMBOL(dma_ops);
diff --git a/arch/sparc/kernel/iommu.c b/arch/sparc/kernel/iommu.c
index 0aeaefe696b..a9f0ad95518 100644
--- a/arch/sparc/kernel/iommu.c
+++ b/arch/sparc/kernel/iommu.c
@@ -353,7 +353,8 @@ static void dma_4u_free_coherent(struct device *dev, size_t size,
 
 static dma_addr_t dma_4u_map_page(struct device *dev, struct page *page,
 				  unsigned long offset, size_t sz,
-				  enum dma_data_direction direction)
+				  enum dma_data_direction direction,
+				  struct dma_attrs *attrs)
 {
 	struct iommu *iommu;
 	struct strbuf *strbuf;
@@ -474,7 +475,8 @@ do_flush_sync:
 }
 
 static void dma_4u_unmap_page(struct device *dev, dma_addr_t bus_addr,
-			      size_t sz, enum dma_data_direction direction)
+			      size_t sz, enum dma_data_direction direction,
+			      struct dma_attrs *attrs)
 {
 	struct iommu *iommu;
 	struct strbuf *strbuf;
@@ -520,7 +522,8 @@ static void dma_4u_unmap_page(struct device *dev, dma_addr_t bus_addr,
 }
 
 static int dma_4u_map_sg(struct device *dev, struct scatterlist *sglist,
-			 int nelems, enum dma_data_direction direction)
+			 int nelems, enum dma_data_direction direction,
+			 struct dma_attrs *attrs)
 {
 	struct scatterlist *s, *outs, *segstart;
 	unsigned long flags, handle, prot, ctx;
@@ -691,7 +694,8 @@ static unsigned long fetch_sg_ctx(struct iommu *iommu, struct scatterlist *sg)
 }
 
 static void dma_4u_unmap_sg(struct device *dev, struct scatterlist *sglist,
-			    int nelems, enum dma_data_direction direction)
+			    int nelems, enum dma_data_direction direction,
+			    struct dma_attrs *attrs)
 {
 	unsigned long flags, ctx;
 	struct scatterlist *sg;
@@ -822,7 +826,7 @@ static void dma_4u_sync_sg_for_cpu(struct device *dev,
 	spin_unlock_irqrestore(&iommu->lock, flags);
 }
 
-static const struct dma_ops sun4u_dma_ops = {
+static const struct dma_map_ops sun4u_dma_ops = {
 	.alloc_coherent		= dma_4u_alloc_coherent,
 	.free_coherent		= dma_4u_free_coherent,
 	.map_page		= dma_4u_map_page,
@@ -833,7 +837,7 @@ static const struct dma_ops sun4u_dma_ops = {
 	.sync_sg_for_cpu	= dma_4u_sync_sg_for_cpu,
 };
 
-const struct dma_ops *dma_ops = &sun4u_dma_ops;
+const struct dma_map_ops *dma_ops = &sun4u_dma_ops;
 EXPORT_SYMBOL(dma_ops);
 
 int dma_supported(struct device *dev, u64 device_mask)
diff --git a/arch/sparc/kernel/pci_sun4v.c b/arch/sparc/kernel/pci_sun4v.c
index 2485eaa2310..c4f7dce577d 100644
--- a/arch/sparc/kernel/pci_sun4v.c
+++ b/arch/sparc/kernel/pci_sun4v.c
@@ -232,7 +232,8 @@ static void dma_4v_free_coherent(struct device *dev, size_t size, void *cpu,
 
 static dma_addr_t dma_4v_map_page(struct device *dev, struct page *page,
 				  unsigned long offset, size_t sz,
-				  enum dma_data_direction direction)
+				  enum dma_data_direction direction,
+				  struct dma_attrs *attrs)
 {
 	struct iommu *iommu;
 	unsigned long flags, npages, oaddr;
@@ -296,7 +297,8 @@ iommu_map_fail:
 }
 
 static void dma_4v_unmap_page(struct device *dev, dma_addr_t bus_addr,
-			      size_t sz, enum dma_data_direction direction)
+			      size_t sz, enum dma_data_direction direction,
+			      struct dma_attrs *attrs)
 {
 	struct pci_pbm_info *pbm;
 	struct iommu *iommu;
@@ -336,7 +338,8 @@ static void dma_4v_unmap_page(struct device *dev, dma_addr_t bus_addr,
 }
 
 static int dma_4v_map_sg(struct device *dev, struct scatterlist *sglist,
-			 int nelems, enum dma_data_direction direction)
+			 int nelems, enum dma_data_direction direction,
+			 struct dma_attrs *attrs)
 {
 	struct scatterlist *s, *outs, *segstart;
 	unsigned long flags, handle, prot;
@@ -478,7 +481,8 @@ iommu_map_failed:
 }
 
 static void dma_4v_unmap_sg(struct device *dev, struct scatterlist *sglist,
-			    int nelems, enum dma_data_direction direction)
+			    int nelems, enum dma_data_direction direction,
+			    struct dma_attrs *attrs)
 {
 	struct pci_pbm_info *pbm;
 	struct scatterlist *sg;
@@ -535,7 +539,7 @@ static void dma_4v_sync_sg_for_cpu(struct device *dev,
 	/* Nothing to do... */
 }
 
-static const struct dma_ops sun4v_dma_ops = {
+static const struct dma_map_ops sun4v_dma_ops = {
 	.alloc_coherent			= dma_4v_alloc_coherent,
 	.free_coherent			= dma_4v_free_coherent,
 	.map_page			= dma_4v_map_page,
-- 
cgit v1.2.3


From 02f7a18935eef0e56d9180fc3c35da6aad1ff3bb Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Mon, 10 Aug 2009 11:53:13 +0900
Subject: sparc: Use asm-generic/dma-mapping-common.h

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Tested-by: Robert Reif <reif@earthlink.net>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: tony.luck@intel.com
Cc: fenghua.yu@intel.com
LKML-Reference: <1249872797-1314-5-git-send-email-fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/sparc/Kconfig                   |   1 +
 arch/sparc/include/asm/dma-mapping.h | 107 +++++------------------------------
 arch/sparc/kernel/dma.c              |   4 +-
 arch/sparc/kernel/iommu.c            |   4 +-
 arch/sparc/kernel/pci_sun4v.c        |   2 +-
 5 files changed, 19 insertions(+), 99 deletions(-)

(limited to 'arch')

diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 3f8b6a92eab..5f2df99645c 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -25,6 +25,7 @@ config SPARC
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select RTC_CLASS
 	select RTC_DRV_M48T59
+	select HAVE_DMA_ATTRS
 
 config SPARC32
 	def_bool !64BIT
diff --git a/arch/sparc/include/asm/dma-mapping.h b/arch/sparc/include/asm/dma-mapping.h
index 893f3ecc975..34c92264208 100644
--- a/arch/sparc/include/asm/dma-mapping.h
+++ b/arch/sparc/include/asm/dma-mapping.h
@@ -3,6 +3,7 @@
 
 #include <linux/scatterlist.h>
 #include <linux/mm.h>
+#include <linux/dma-debug.h>
 
 #define DMA_ERROR_CODE	(~(dma_addr_t)0x0)
 
@@ -13,113 +14,31 @@ extern int dma_set_mask(struct device *dev, u64 dma_mask);
 #define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
 #define dma_is_consistent(d, h)	(1)
 
-extern const struct dma_map_ops *dma_ops;
+extern struct dma_map_ops *dma_ops;
 
-static inline void *dma_alloc_coherent(struct device *dev, size_t size,
-				       dma_addr_t *dma_handle, gfp_t flag)
-{
-	return dma_ops->alloc_coherent(dev, size, dma_handle, flag);
-}
-
-static inline void dma_free_coherent(struct device *dev, size_t size,
-				     void *cpu_addr, dma_addr_t dma_handle)
-{
-	dma_ops->free_coherent(dev, size, cpu_addr, dma_handle);
-}
-
-static inline dma_addr_t dma_map_single(struct device *dev, void *cpu_addr,
-					size_t size,
-					enum dma_data_direction direction)
+static inline struct dma_map_ops *get_dma_ops(struct device *dev)
 {
-	return dma_ops->map_page(dev, virt_to_page(cpu_addr),
-				 (unsigned long)cpu_addr & ~PAGE_MASK, size,
-				 direction, NULL);
+	return dma_ops;
 }
 
-static inline void dma_unmap_single(struct device *dev, dma_addr_t dma_addr,
-				    size_t size,
-				    enum dma_data_direction direction)
-{
-	dma_ops->unmap_page(dev, dma_addr, size, direction, NULL);
-}
-
-static inline dma_addr_t dma_map_page(struct device *dev, struct page *page,
-				      unsigned long offset, size_t size,
-				      enum dma_data_direction direction)
-{
-	return dma_ops->map_page(dev, page, offset, size, direction, NULL);
-}
+#include <asm-generic/dma-mapping-common.h>
 
-static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
-				  size_t size,
-				  enum dma_data_direction direction)
-{
-	dma_ops->unmap_page(dev, dma_address, size, direction, NULL);
-}
-
-static inline int dma_map_sg(struct device *dev, struct scatterlist *sg,
-			     int nents, enum dma_data_direction direction)
-{
-	return dma_ops->map_sg(dev, sg, nents, direction, NULL);
-}
-
-static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
-				int nents, enum dma_data_direction direction)
-{
-	dma_ops->unmap_sg(dev, sg, nents, direction, NULL);
-}
-
-static inline void dma_sync_single_for_cpu(struct device *dev,
-					   dma_addr_t dma_handle, size_t size,
-					   enum dma_data_direction direction)
-{
-	dma_ops->sync_single_for_cpu(dev, dma_handle, size, direction);
-}
-
-static inline void dma_sync_single_for_device(struct device *dev,
-					      dma_addr_t dma_handle,
-					      size_t size,
-					      enum dma_data_direction direction)
-{
-	if (dma_ops->sync_single_for_device)
-		dma_ops->sync_single_for_device(dev, dma_handle, size,
-						direction);
-}
-
-static inline void dma_sync_sg_for_cpu(struct device *dev,
-				       struct scatterlist *sg, int nelems,
-				       enum dma_data_direction direction)
+static inline void *dma_alloc_coherent(struct device *dev, size_t size,
+				       dma_addr_t *dma_handle, gfp_t flag)
 {
-	dma_ops->sync_sg_for_cpu(dev, sg, nelems, direction);
-}
+	struct dma_map_ops *ops = get_dma_ops(dev);
 
-static inline void dma_sync_sg_for_device(struct device *dev,
-					  struct scatterlist *sg, int nelems,
-					  enum dma_data_direction direction)
-{
-	if (dma_ops->sync_sg_for_device)
-		dma_ops->sync_sg_for_device(dev, sg, nelems, direction);
+	return ops->alloc_coherent(dev, size, dma_handle, flag);
 }
 
-static inline void dma_sync_single_range_for_cpu(struct device *dev,
-						 dma_addr_t dma_handle,
-						 unsigned long offset,
-						 size_t size,
-						 enum dma_data_direction dir)
+static inline void dma_free_coherent(struct device *dev, size_t size,
+				     void *cpu_addr, dma_addr_t dma_handle)
 {
-	dma_sync_single_for_cpu(dev, dma_handle+offset, size, dir);
-}
+	struct dma_map_ops *ops = get_dma_ops(dev);
 
-static inline void dma_sync_single_range_for_device(struct device *dev,
-						    dma_addr_t dma_handle,
-						    unsigned long offset,
-						    size_t size,
-						    enum dma_data_direction dir)
-{
-	dma_sync_single_for_device(dev, dma_handle+offset, size, dir);
+	ops->free_coherent(dev, size, cpu_addr, dma_handle);
 }
 
-
 static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
 {
 	return (dma_addr == DMA_ERROR_CODE);
diff --git a/arch/sparc/kernel/dma.c b/arch/sparc/kernel/dma.c
index 473a3fc7ab5..15820a91817 100644
--- a/arch/sparc/kernel/dma.c
+++ b/arch/sparc/kernel/dma.c
@@ -165,7 +165,7 @@ static void dma32_sync_sg_for_device(struct device *dev,
 	BUG();
 }
 
-static const struct dma_map_ops dma32_dma_ops = {
+static struct dma_map_ops dma32_dma_ops = {
 	.alloc_coherent		= dma32_alloc_coherent,
 	.free_coherent		= dma32_free_coherent,
 	.map_page		= dma32_map_page,
@@ -178,5 +178,5 @@ static const struct dma_map_ops dma32_dma_ops = {
 	.sync_sg_for_device	= dma32_sync_sg_for_device,
 };
 
-const struct dma_map_ops *dma_ops = &dma32_dma_ops;
+struct dma_map_ops *dma_ops = &dma32_dma_ops;
 EXPORT_SYMBOL(dma_ops);
diff --git a/arch/sparc/kernel/iommu.c b/arch/sparc/kernel/iommu.c
index a9f0ad95518..74b289cab55 100644
--- a/arch/sparc/kernel/iommu.c
+++ b/arch/sparc/kernel/iommu.c
@@ -826,7 +826,7 @@ static void dma_4u_sync_sg_for_cpu(struct device *dev,
 	spin_unlock_irqrestore(&iommu->lock, flags);
 }
 
-static const struct dma_map_ops sun4u_dma_ops = {
+static struct dma_map_ops sun4u_dma_ops = {
 	.alloc_coherent		= dma_4u_alloc_coherent,
 	.free_coherent		= dma_4u_free_coherent,
 	.map_page		= dma_4u_map_page,
@@ -837,7 +837,7 @@ static const struct dma_map_ops sun4u_dma_ops = {
 	.sync_sg_for_cpu	= dma_4u_sync_sg_for_cpu,
 };
 
-const struct dma_map_ops *dma_ops = &sun4u_dma_ops;
+struct dma_map_ops *dma_ops = &sun4u_dma_ops;
 EXPORT_SYMBOL(dma_ops);
 
 int dma_supported(struct device *dev, u64 device_mask)
diff --git a/arch/sparc/kernel/pci_sun4v.c b/arch/sparc/kernel/pci_sun4v.c
index c4f7dce577d..ee800f92792 100644
--- a/arch/sparc/kernel/pci_sun4v.c
+++ b/arch/sparc/kernel/pci_sun4v.c
@@ -539,7 +539,7 @@ static void dma_4v_sync_sg_for_cpu(struct device *dev,
 	/* Nothing to do... */
 }
 
-static const struct dma_map_ops sun4v_dma_ops = {
+static struct dma_map_ops sun4v_dma_ops = {
 	.alloc_coherent			= dma_4v_alloc_coherent,
 	.free_coherent			= dma_4v_free_coherent,
 	.map_page			= dma_4v_map_page,
-- 
cgit v1.2.3


From 595cc8560783ea31ed1208dc1f97282a2a5606b7 Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Mon, 10 Aug 2009 11:53:14 +0900
Subject: sparc: Remove no-op dma_4v_sync_single_for_cpu and
 dma_4v_sync_sg_for_cpu

Now sparc uses include/asm-generic/dma-mapping-common.h.
pci_sun4v.c doesn't need to have no-op
dma_4v_sync_single_for_cpu and dma_4v_sync_sg_for_cpu
(dma-mapping-common.h does nothing if sync_{single|sg}_for_cpu
hook is not defined). So we can remove them safely.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Tested-by: Robert Reif <reif@earthlink.net>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: tony.luck@intel.com
Cc: fenghua.yu@intel.com
LKML-Reference: <1249872797-1314-6-git-send-email-fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/sparc/kernel/pci_sun4v.c | 16 ----------------
 1 file changed, 16 deletions(-)

(limited to 'arch')

diff --git a/arch/sparc/kernel/pci_sun4v.c b/arch/sparc/kernel/pci_sun4v.c
index ee800f92792..23c33ff9c31 100644
--- a/arch/sparc/kernel/pci_sun4v.c
+++ b/arch/sparc/kernel/pci_sun4v.c
@@ -525,20 +525,6 @@ static void dma_4v_unmap_sg(struct device *dev, struct scatterlist *sglist,
 	spin_unlock_irqrestore(&iommu->lock, flags);
 }
 
-static void dma_4v_sync_single_for_cpu(struct device *dev,
-				       dma_addr_t bus_addr, size_t sz,
-				       enum dma_data_direction direction)
-{
-	/* Nothing to do... */
-}
-
-static void dma_4v_sync_sg_for_cpu(struct device *dev,
-				   struct scatterlist *sglist, int nelems,
-				   enum dma_data_direction direction)
-{
-	/* Nothing to do... */
-}
-
 static struct dma_map_ops sun4v_dma_ops = {
 	.alloc_coherent			= dma_4v_alloc_coherent,
 	.free_coherent			= dma_4v_free_coherent,
@@ -546,8 +532,6 @@ static struct dma_map_ops sun4v_dma_ops = {
 	.unmap_page			= dma_4v_unmap_page,
 	.map_sg				= dma_4v_map_sg,
 	.unmap_sg			= dma_4v_unmap_sg,
-	.sync_single_for_cpu		= dma_4v_sync_single_for_cpu,
-	.sync_sg_for_cpu		= dma_4v_sync_sg_for_cpu,
 };
 
 static void __devinit pci_sun4v_scan_bus(struct pci_pbm_info *pbm,
-- 
cgit v1.2.3


From c2c07dbd8742a26ab3f1ee8b82237a060a0d9f61 Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Mon, 10 Aug 2009 11:53:15 +0900
Subject: sparc: Replace sbus_map_single and sbus_unmap_single with
 sbus_map_page and sbus_unmap_page

This is a preparation for using asm-generic/pci-dma-compat.h;
SPARC32 has two dma_map_ops structures for pci and sbus
(removing arch/sparc/kernel/dma.c, PCI and SBUS DMA accessor).

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Tested-by: Robert Reif <reif@earthlink.net>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: tony.luck@intel.com
Cc: fenghua.yu@intel.com
LKML-Reference: <1249872797-1314-7-git-send-email-fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/sparc/kernel/dma.c    | 5 ++---
 arch/sparc/kernel/dma.h    | 6 +++---
 arch/sparc/kernel/ioport.c | 7 +++++--
 3 files changed, 10 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/sparc/kernel/dma.c b/arch/sparc/kernel/dma.c
index 15820a91817..a5d50dac735 100644
--- a/arch/sparc/kernel/dma.c
+++ b/arch/sparc/kernel/dma.c
@@ -68,8 +68,7 @@ static dma_addr_t dma32_map_page(struct device *dev, struct page *page,
 		return pci_map_page(to_pci_dev(dev), page, offset,
 				    size, (int)direction);
 #endif
-	return sbus_map_single(dev, page_address(page) + offset,
-			       size, (int)direction);
+	return sbus_map_page(dev, page, offset, size, (int)direction);
 }
 
 static void dma32_unmap_page(struct device *dev, dma_addr_t dma_address,
@@ -83,7 +82,7 @@ static void dma32_unmap_page(struct device *dev, dma_addr_t dma_address,
 		return;
 	}
 #endif
-	sbus_unmap_single(dev, dma_address, size, (int)direction);
+	sbus_unmap_page(dev, dma_address, size, (int)direction);
 }
 
 static int dma32_map_sg(struct device *dev, struct scatterlist *sg,
diff --git a/arch/sparc/kernel/dma.h b/arch/sparc/kernel/dma.h
index f8d8951adb5..680351ee0d4 100644
--- a/arch/sparc/kernel/dma.h
+++ b/arch/sparc/kernel/dma.h
@@ -1,8 +1,8 @@
 void *sbus_alloc_consistent(struct device *dev, long len, u32 *dma_addrp);
 void sbus_free_consistent(struct device *dev, long n, void *p, u32 ba);
-dma_addr_t sbus_map_single(struct device *dev, void *va,
-			   size_t len, int direction);
-void sbus_unmap_single(struct device *dev, dma_addr_t ba,
+dma_addr_t sbus_map_page(struct device *dev, struct page *page,
+			 unsigned long offset, size_t len, int direction);
+void sbus_unmap_page(struct device *dev, dma_addr_t ba,
 		       size_t n, int direction);
 int sbus_map_sg(struct device *dev, struct scatterlist *sg,
 		int n, int direction);
diff --git a/arch/sparc/kernel/ioport.c b/arch/sparc/kernel/ioport.c
index 87ea0d03d97..39ff1e0c518 100644
--- a/arch/sparc/kernel/ioport.c
+++ b/arch/sparc/kernel/ioport.c
@@ -337,8 +337,11 @@ void sbus_free_consistent(struct device *dev, long n, void *p, u32 ba)
  * CPU view of this memory may be inconsistent with
  * a device view and explicit flushing is necessary.
  */
-dma_addr_t sbus_map_single(struct device *dev, void *va, size_t len, int direction)
+dma_addr_t sbus_map_page(struct device *dev, struct page *page,
+			 unsigned long offset, size_t len, int direction)
 {
+	void *va = page_address(page) + offset;
+
 	/* XXX why are some lengths signed, others unsigned? */
 	if (len <= 0) {
 		return 0;
@@ -350,7 +353,7 @@ dma_addr_t sbus_map_single(struct device *dev, void *va, size_t len, int directi
 	return mmu_get_scsi_one(dev, va, len);
 }
 
-void sbus_unmap_single(struct device *dev, dma_addr_t ba, size_t n, int direction)
+void sbus_unmap_page(struct device *dev, dma_addr_t ba, size_t n, int direction)
 {
 	mmu_release_scsi_one(dev, ba, n);
 }
-- 
cgit v1.2.3


From ee664a9252d24ef10317d1bba8fc8f4c6495b36c Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Mon, 10 Aug 2009 11:53:16 +0900
Subject: sparc: Use asm-generic/pci-dma-compat

This converts SPARC to use asm-generic/pci-dma-compat instead
of the homegrown mechnism.

SPARC32 has two dma_map_ops structures for pci and sbus
(removing arch/sparc/kernel/dma.c, PCI and SBUS DMA accessor).
The global 'dma_ops' is set to sbus_dma_ops and get_dma_ops()
returns pci32_dma_ops for pci devices so we can use the
appropriate dma mapping operations.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Tested-by: Robert Reif <reif@earthlink.net>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: tony.luck@intel.com
Cc: fenghua.yu@intel.com
LKML-Reference: <1249872797-1314-8-git-send-email-fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/sparc/include/asm/dma-mapping.h |   7 +-
 arch/sparc/include/asm/pci.h         |   3 +
 arch/sparc/include/asm/pci_32.h      | 105 -----------------------
 arch/sparc/include/asm/pci_64.h      |  88 -------------------
 arch/sparc/kernel/dma.c              | 155 ++-------------------------------
 arch/sparc/kernel/dma.h              |  14 ---
 arch/sparc/kernel/iommu.c            |   4 +-
 arch/sparc/kernel/ioport.c           | 162 ++++++++++++++++-------------------
 arch/sparc/kernel/pci.c              |   2 +-
 9 files changed, 96 insertions(+), 444 deletions(-)
 delete mode 100644 arch/sparc/kernel/dma.h

(limited to 'arch')

diff --git a/arch/sparc/include/asm/dma-mapping.h b/arch/sparc/include/asm/dma-mapping.h
index 34c92264208..2677818dc78 100644
--- a/arch/sparc/include/asm/dma-mapping.h
+++ b/arch/sparc/include/asm/dma-mapping.h
@@ -14,10 +14,15 @@ extern int dma_set_mask(struct device *dev, u64 dma_mask);
 #define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
 #define dma_is_consistent(d, h)	(1)
 
-extern struct dma_map_ops *dma_ops;
+extern struct dma_map_ops *dma_ops, pci32_dma_ops;
+extern struct bus_type pci_bus_type;
 
 static inline struct dma_map_ops *get_dma_ops(struct device *dev)
 {
+#if defined(CONFIG_SPARC32) && defined(CONFIG_PCI)
+	if (dev->bus == &pci_bus_type)
+		return &pci32_dma_ops;
+#endif
 	return dma_ops;
 }
 
diff --git a/arch/sparc/include/asm/pci.h b/arch/sparc/include/asm/pci.h
index 6e14fd17933..d9c031f9910 100644
--- a/arch/sparc/include/asm/pci.h
+++ b/arch/sparc/include/asm/pci.h
@@ -5,4 +5,7 @@
 #else
 #include <asm/pci_32.h>
 #endif
+
+#include <asm-generic/pci-dma-compat.h>
+
 #endif
diff --git a/arch/sparc/include/asm/pci_32.h b/arch/sparc/include/asm/pci_32.h
index b41c4c19815..ac0e8369fd9 100644
--- a/arch/sparc/include/asm/pci_32.h
+++ b/arch/sparc/include/asm/pci_32.h
@@ -31,42 +31,8 @@ static inline void pcibios_penalize_isa_irq(int irq, int active)
  */
 #define PCI_DMA_BUS_IS_PHYS	(0)
 
-#include <asm/scatterlist.h>
-
 struct pci_dev;
 
-/* Allocate and map kernel buffer using consistent mode DMA for a device.
- * hwdev should be valid struct pci_dev pointer for PCI devices.
- */
-extern void *pci_alloc_consistent(struct pci_dev *hwdev, size_t size, dma_addr_t *dma_handle);
-
-/* Free and unmap a consistent DMA buffer.
- * cpu_addr is what was returned from pci_alloc_consistent,
- * size must be the same as what as passed into pci_alloc_consistent,
- * and likewise dma_addr must be the same as what *dma_addrp was set to.
- *
- * References to the memory and mappings assosciated with cpu_addr/dma_addr
- * past this call are illegal.
- */
-extern void pci_free_consistent(struct pci_dev *hwdev, size_t size, void *vaddr, dma_addr_t dma_handle);
-
-/* Map a single buffer of the indicated size for DMA in streaming mode.
- * The 32-bit bus address to use is returned.
- *
- * Once the device is given the dma address, the device owns this memory
- * until either pci_unmap_single or pci_dma_sync_single_for_cpu is performed.
- */
-extern dma_addr_t pci_map_single(struct pci_dev *hwdev, void *ptr, size_t size, int direction);
-
-/* Unmap a single streaming mode DMA translation.  The dma_addr and size
- * must match what was provided for in a previous pci_map_single call.  All
- * other usages are undefined.
- *
- * After this call, reads by the cpu to the buffer are guaranteed to see
- * whatever the device wrote there.
- */
-extern void pci_unmap_single(struct pci_dev *hwdev, dma_addr_t dma_addr, size_t size, int direction);
-
 /* pci_unmap_{single,page} is not a nop, thus... */
 #define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	\
 	dma_addr_t ADDR_NAME;
@@ -81,69 +47,6 @@ extern void pci_unmap_single(struct pci_dev *hwdev, dma_addr_t dma_addr, size_t
 #define pci_unmap_len_set(PTR, LEN_NAME, VAL)		\
 	(((PTR)->LEN_NAME) = (VAL))
 
-/*
- * Same as above, only with pages instead of mapped addresses.
- */
-extern dma_addr_t pci_map_page(struct pci_dev *hwdev, struct page *page,
-			unsigned long offset, size_t size, int direction);
-extern void pci_unmap_page(struct pci_dev *hwdev,
-			dma_addr_t dma_address, size_t size, int direction);
-
-/* Map a set of buffers described by scatterlist in streaming
- * mode for DMA.  This is the scather-gather version of the
- * above pci_map_single interface.  Here the scatter gather list
- * elements are each tagged with the appropriate dma address
- * and length.  They are obtained via sg_dma_{address,length}(SG).
- *
- * NOTE: An implementation may be able to use a smaller number of
- *       DMA address/length pairs than there are SG table elements.
- *       (for example via virtual mapping capabilities)
- *       The routine returns the number of addr/length pairs actually
- *       used, at most nents.
- *
- * Device ownership issues as mentioned above for pci_map_single are
- * the same here.
- */
-extern int pci_map_sg(struct pci_dev *hwdev, struct scatterlist *sg, int nents, int direction);
-
-/* Unmap a set of streaming mode DMA translations.
- * Again, cpu read rules concerning calls here are the same as for
- * pci_unmap_single() above.
- */
-extern void pci_unmap_sg(struct pci_dev *hwdev, struct scatterlist *sg, int nhwents, int direction);
-
-/* Make physical memory consistent for a single
- * streaming mode DMA translation after a transfer.
- *
- * If you perform a pci_map_single() but wish to interrogate the
- * buffer using the cpu, yet do not wish to teardown the PCI dma
- * mapping, you must call this function before doing so.  At the
- * next point you give the PCI dma address back to the card, you
- * must first perform a pci_dma_sync_for_device, and then the device
- * again owns the buffer.
- */
-extern void pci_dma_sync_single_for_cpu(struct pci_dev *hwdev, dma_addr_t dma_handle, size_t size, int direction);
-extern void pci_dma_sync_single_for_device(struct pci_dev *hwdev, dma_addr_t dma_handle, size_t size, int direction);
-
-/* Make physical memory consistent for a set of streaming
- * mode DMA translations after a transfer.
- *
- * The same as pci_dma_sync_single_* but for a scatter-gather list,
- * same rules and usage.
- */
-extern void pci_dma_sync_sg_for_cpu(struct pci_dev *hwdev, struct scatterlist *sg, int nelems, int direction);
-extern void pci_dma_sync_sg_for_device(struct pci_dev *hwdev, struct scatterlist *sg, int nelems, int direction);
-
-/* Return whether the given PCI device DMA address mask can
- * be supported properly.  For example, if your device can
- * only drive the low 24-bits during PCI bus mastering, then
- * you would pass 0x00ffffff as the mask to this function.
- */
-static inline int pci_dma_supported(struct pci_dev *hwdev, u64 mask)
-{
-	return 1;
-}
-
 #ifdef CONFIG_PCI
 static inline void pci_dma_burst_advice(struct pci_dev *pdev,
 					enum pci_dma_burst_strategy *strat,
@@ -154,14 +57,6 @@ static inline void pci_dma_burst_advice(struct pci_dev *pdev,
 }
 #endif
 
-#define PCI_DMA_ERROR_CODE      (~(dma_addr_t)0x0)
-
-static inline int pci_dma_mapping_error(struct pci_dev *pdev,
-					dma_addr_t dma_addr)
-{
-        return (dma_addr == PCI_DMA_ERROR_CODE);
-}
-
 struct device_node;
 extern struct device_node *pci_device_to_OF_node(struct pci_dev *pdev);
 
diff --git a/arch/sparc/include/asm/pci_64.h b/arch/sparc/include/asm/pci_64.h
index 7a1e3566e59..5cc9f6aa549 100644
--- a/arch/sparc/include/asm/pci_64.h
+++ b/arch/sparc/include/asm/pci_64.h
@@ -35,37 +35,6 @@ static inline void pcibios_penalize_isa_irq(int irq, int active)
  */
 #define PCI_DMA_BUS_IS_PHYS	(0)
 
-static inline void *pci_alloc_consistent(struct pci_dev *pdev, size_t size,
-					 dma_addr_t *dma_handle)
-{
-	return dma_alloc_coherent(&pdev->dev, size, dma_handle, GFP_ATOMIC);
-}
-
-static inline void pci_free_consistent(struct pci_dev *pdev, size_t size,
-				       void *vaddr, dma_addr_t dma_handle)
-{
-	return dma_free_coherent(&pdev->dev, size, vaddr, dma_handle);
-}
-
-static inline dma_addr_t pci_map_single(struct pci_dev *pdev, void *ptr,
-					size_t size, int direction)
-{
-	return dma_map_single(&pdev->dev, ptr, size,
-			      (enum dma_data_direction) direction);
-}
-
-static inline void pci_unmap_single(struct pci_dev *pdev, dma_addr_t dma_addr,
-				    size_t size, int direction)
-{
-	dma_unmap_single(&pdev->dev, dma_addr, size,
-			 (enum dma_data_direction) direction);
-}
-
-#define pci_map_page(dev, page, off, size, dir) \
-	pci_map_single(dev, (page_address(page) + (off)), size, dir)
-#define pci_unmap_page(dev,addr,sz,dir) \
-	pci_unmap_single(dev,addr,sz,dir)
-
 /* pci_unmap_{single,page} is not a nop, thus... */
 #define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	\
 	dma_addr_t ADDR_NAME;
@@ -80,57 +49,6 @@ static inline void pci_unmap_single(struct pci_dev *pdev, dma_addr_t dma_addr,
 #define pci_unmap_len_set(PTR, LEN_NAME, VAL)		\
 	(((PTR)->LEN_NAME) = (VAL))
 
-static inline int pci_map_sg(struct pci_dev *pdev, struct scatterlist *sg,
-			     int nents, int direction)
-{
-	return dma_map_sg(&pdev->dev, sg, nents,
-			  (enum dma_data_direction) direction);
-}
-
-static inline void pci_unmap_sg(struct pci_dev *pdev, struct scatterlist *sg,
-				int nents, int direction)
-{
-	dma_unmap_sg(&pdev->dev, sg, nents,
-		     (enum dma_data_direction) direction);
-}
-
-static inline void pci_dma_sync_single_for_cpu(struct pci_dev *pdev,
-					       dma_addr_t dma_handle,
-					       size_t size, int direction)
-{
-	dma_sync_single_for_cpu(&pdev->dev, dma_handle, size,
-				(enum dma_data_direction) direction);
-}
-
-static inline void pci_dma_sync_single_for_device(struct pci_dev *pdev,
-						  dma_addr_t dma_handle,
-						  size_t size, int direction)
-{
-	/* No flushing needed to sync cpu writes to the device.  */
-}
-
-static inline void pci_dma_sync_sg_for_cpu(struct pci_dev *pdev,
-					   struct scatterlist *sg,
-					   int nents, int direction)
-{
-	dma_sync_sg_for_cpu(&pdev->dev, sg, nents,
-			    (enum dma_data_direction) direction);
-}
-
-static inline void pci_dma_sync_sg_for_device(struct pci_dev *pdev,
-					      struct scatterlist *sg,
-					      int nelems, int direction)
-{
-	/* No flushing needed to sync cpu writes to the device.  */
-}
-
-/* Return whether the given PCI device DMA address mask can
- * be supported properly.  For example, if your device can
- * only drive the low 24-bits during PCI bus mastering, then
- * you would pass 0x00ffffff as the mask to this function.
- */
-extern int pci_dma_supported(struct pci_dev *hwdev, u64 mask);
-
 /* PCI IOMMU mapping bypass support. */
 
 /* PCI 64-bit addressing works for all slots on all controller
@@ -140,12 +58,6 @@ extern int pci_dma_supported(struct pci_dev *hwdev, u64 mask);
 #define PCI64_REQUIRED_MASK	(~(dma64_addr_t)0)
 #define PCI64_ADDR_BASE		0xfffc000000000000UL
 
-static inline int pci_dma_mapping_error(struct pci_dev *pdev,
-					dma_addr_t dma_addr)
-{
-	return dma_mapping_error(&pdev->dev, dma_addr);
-}
-
 #ifdef CONFIG_PCI
 static inline void pci_dma_burst_advice(struct pci_dev *pdev,
 					enum pci_dma_burst_strategy *strat,
diff --git a/arch/sparc/kernel/dma.c b/arch/sparc/kernel/dma.c
index a5d50dac735..b2fa3127f60 100644
--- a/arch/sparc/kernel/dma.c
+++ b/arch/sparc/kernel/dma.c
@@ -13,13 +13,17 @@
 #include <linux/pci.h>
 #endif
 
-#include "dma.h"
-
+/*
+ * Return whether the given PCI device DMA address mask can be
+ * supported properly.  For example, if your device can only drive the
+ * low 24-bits during PCI bus mastering, then you would pass
+ * 0x00ffffff as the mask to this function.
+ */
 int dma_supported(struct device *dev, u64 mask)
 {
 #ifdef CONFIG_PCI
 	if (dev->bus == &pci_bus_type)
-		return pci_dma_supported(to_pci_dev(dev), mask);
+		return 1;
 #endif
 	return 0;
 }
@@ -34,148 +38,3 @@ int dma_set_mask(struct device *dev, u64 dma_mask)
 	return -EOPNOTSUPP;
 }
 EXPORT_SYMBOL(dma_set_mask);
-
-static void *dma32_alloc_coherent(struct device *dev, size_t size,
-				  dma_addr_t *dma_handle, gfp_t flag)
-{
-#ifdef CONFIG_PCI
-	if (dev->bus == &pci_bus_type)
-		return pci_alloc_consistent(to_pci_dev(dev), size, dma_handle);
-#endif
-	return sbus_alloc_consistent(dev, size, dma_handle);
-}
-
-static void dma32_free_coherent(struct device *dev, size_t size,
-				void *cpu_addr, dma_addr_t dma_handle)
-{
-#ifdef CONFIG_PCI
-	if (dev->bus == &pci_bus_type) {
-		pci_free_consistent(to_pci_dev(dev), size,
-				    cpu_addr, dma_handle);
-		return;
-	}
-#endif
-	sbus_free_consistent(dev, size, cpu_addr, dma_handle);
-}
-
-static dma_addr_t dma32_map_page(struct device *dev, struct page *page,
-				 unsigned long offset, size_t size,
-				 enum dma_data_direction direction,
-				 struct dma_attrs *attrs)
-{
-#ifdef CONFIG_PCI
-	if (dev->bus == &pci_bus_type)
-		return pci_map_page(to_pci_dev(dev), page, offset,
-				    size, (int)direction);
-#endif
-	return sbus_map_page(dev, page, offset, size, (int)direction);
-}
-
-static void dma32_unmap_page(struct device *dev, dma_addr_t dma_address,
-			     size_t size, enum dma_data_direction direction,
-			     struct dma_attrs *attrs)
-{
-#ifdef CONFIG_PCI
-	if (dev->bus == &pci_bus_type) {
-		pci_unmap_page(to_pci_dev(dev), dma_address,
-			       size, (int)direction);
-		return;
-	}
-#endif
-	sbus_unmap_page(dev, dma_address, size, (int)direction);
-}
-
-static int dma32_map_sg(struct device *dev, struct scatterlist *sg,
-			int nents, enum dma_data_direction direction,
-			struct dma_attrs *attrs)
-{
-#ifdef CONFIG_PCI
-	if (dev->bus == &pci_bus_type)
-		return pci_map_sg(to_pci_dev(dev), sg, nents, (int)direction);
-#endif
-	return sbus_map_sg(dev, sg, nents, direction);
-}
-
-void dma32_unmap_sg(struct device *dev, struct scatterlist *sg,
-		    int nents, enum dma_data_direction direction,
-		    struct dma_attrs *attrs)
-{
-#ifdef CONFIG_PCI
-	if (dev->bus == &pci_bus_type) {
-		pci_unmap_sg(to_pci_dev(dev), sg, nents, (int)direction);
-		return;
-	}
-#endif
-	sbus_unmap_sg(dev, sg, nents, (int)direction);
-}
-
-static void dma32_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle,
-				      size_t size,
-				      enum dma_data_direction direction)
-{
-#ifdef CONFIG_PCI
-	if (dev->bus == &pci_bus_type) {
-		pci_dma_sync_single_for_cpu(to_pci_dev(dev), dma_handle,
-					    size, (int)direction);
-		return;
-	}
-#endif
-	sbus_dma_sync_single_for_cpu(dev, dma_handle, size, (int) direction);
-}
-
-static void dma32_sync_single_for_device(struct device *dev,
-					 dma_addr_t dma_handle, size_t size,
-					 enum dma_data_direction direction)
-{
-#ifdef CONFIG_PCI
-	if (dev->bus == &pci_bus_type) {
-		pci_dma_sync_single_for_device(to_pci_dev(dev), dma_handle,
-					       size, (int)direction);
-		return;
-	}
-#endif
-	sbus_dma_sync_single_for_device(dev, dma_handle, size, (int) direction);
-}
-
-static void dma32_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
-				  int nelems, enum dma_data_direction direction)
-{
-#ifdef CONFIG_PCI
-	if (dev->bus == &pci_bus_type) {
-		pci_dma_sync_sg_for_cpu(to_pci_dev(dev), sg,
-					nelems, (int)direction);
-		return;
-	}
-#endif
-	BUG();
-}
-
-static void dma32_sync_sg_for_device(struct device *dev,
-				     struct scatterlist *sg, int nelems,
-				     enum dma_data_direction direction)
-{
-#ifdef CONFIG_PCI
-	if (dev->bus == &pci_bus_type) {
-		pci_dma_sync_sg_for_device(to_pci_dev(dev), sg,
-					   nelems, (int)direction);
-		return;
-	}
-#endif
-	BUG();
-}
-
-static struct dma_map_ops dma32_dma_ops = {
-	.alloc_coherent		= dma32_alloc_coherent,
-	.free_coherent		= dma32_free_coherent,
-	.map_page		= dma32_map_page,
-	.unmap_page		= dma32_unmap_page,
-	.map_sg			= dma32_map_sg,
-	.unmap_sg		= dma32_unmap_sg,
-	.sync_single_for_cpu	= dma32_sync_single_for_cpu,
-	.sync_single_for_device	= dma32_sync_single_for_device,
-	.sync_sg_for_cpu	= dma32_sync_sg_for_cpu,
-	.sync_sg_for_device	= dma32_sync_sg_for_device,
-};
-
-struct dma_map_ops *dma_ops = &dma32_dma_ops;
-EXPORT_SYMBOL(dma_ops);
diff --git a/arch/sparc/kernel/dma.h b/arch/sparc/kernel/dma.h
deleted file mode 100644
index 680351ee0d4..00000000000
--- a/arch/sparc/kernel/dma.h
+++ /dev/null
@@ -1,14 +0,0 @@
-void *sbus_alloc_consistent(struct device *dev, long len, u32 *dma_addrp);
-void sbus_free_consistent(struct device *dev, long n, void *p, u32 ba);
-dma_addr_t sbus_map_page(struct device *dev, struct page *page,
-			 unsigned long offset, size_t len, int direction);
-void sbus_unmap_page(struct device *dev, dma_addr_t ba,
-		       size_t n, int direction);
-int sbus_map_sg(struct device *dev, struct scatterlist *sg,
-		int n, int direction);
-void sbus_unmap_sg(struct device *dev, struct scatterlist *sg,
-		   int n, int direction);
-void sbus_dma_sync_single_for_cpu(struct device *dev, dma_addr_t ba,
-				  size_t size, int direction);
-void sbus_dma_sync_single_for_device(struct device *dev, dma_addr_t ba,
-				     size_t size, int direction);
diff --git a/arch/sparc/kernel/iommu.c b/arch/sparc/kernel/iommu.c
index 74b289cab55..7690cc219ec 100644
--- a/arch/sparc/kernel/iommu.c
+++ b/arch/sparc/kernel/iommu.c
@@ -840,6 +840,8 @@ static struct dma_map_ops sun4u_dma_ops = {
 struct dma_map_ops *dma_ops = &sun4u_dma_ops;
 EXPORT_SYMBOL(dma_ops);
 
+extern int pci64_dma_supported(struct pci_dev *pdev, u64 device_mask);
+
 int dma_supported(struct device *dev, u64 device_mask)
 {
 	struct iommu *iommu = dev->archdata.iommu;
@@ -853,7 +855,7 @@ int dma_supported(struct device *dev, u64 device_mask)
 
 #ifdef CONFIG_PCI
 	if (dev->bus == &pci_bus_type)
-		return pci_dma_supported(to_pci_dev(dev), device_mask);
+		return pci64_dma_supported(to_pci_dev(dev), device_mask);
 #endif
 
 	return 0;
diff --git a/arch/sparc/kernel/ioport.c b/arch/sparc/kernel/ioport.c
index 39ff1e0c518..1eb60438965 100644
--- a/arch/sparc/kernel/ioport.c
+++ b/arch/sparc/kernel/ioport.c
@@ -48,8 +48,6 @@
 #include <asm/iommu.h>
 #include <asm/io-unit.h>
 
-#include "dma.h"
-
 #define mmu_inval_dma_area(p, l)	/* Anton pulled it out for 2.4.0-xx */
 
 static struct resource *_sparc_find_resource(struct resource *r,
@@ -246,7 +244,8 @@ EXPORT_SYMBOL(sbus_set_sbus64);
  * Typically devices use them for control blocks.
  * CPU may access them without any explicit flushing.
  */
-void *sbus_alloc_consistent(struct device *dev, long len, u32 *dma_addrp)
+static void *sbus_alloc_coherent(struct device *dev, size_t len,
+				 dma_addr_t *dma_addrp, gfp_t gfp)
 {
 	struct of_device *op = to_of_device(dev);
 	unsigned long len_total = (len + PAGE_SIZE-1) & PAGE_MASK;
@@ -299,7 +298,8 @@ err_nopages:
 	return NULL;
 }
 
-void sbus_free_consistent(struct device *dev, long n, void *p, u32 ba)
+static void sbus_free_coherent(struct device *dev, size_t n, void *p,
+			       dma_addr_t ba)
 {
 	struct resource *res;
 	struct page *pgv;
@@ -317,7 +317,7 @@ void sbus_free_consistent(struct device *dev, long n, void *p, u32 ba)
 
 	n = (n + PAGE_SIZE-1) & PAGE_MASK;
 	if ((res->end-res->start)+1 != n) {
-		printk("sbus_free_consistent: region 0x%lx asked 0x%lx\n",
+		printk("sbus_free_consistent: region 0x%lx asked 0x%zx\n",
 		    (long)((res->end-res->start)+1), n);
 		return;
 	}
@@ -337,8 +337,10 @@ void sbus_free_consistent(struct device *dev, long n, void *p, u32 ba)
  * CPU view of this memory may be inconsistent with
  * a device view and explicit flushing is necessary.
  */
-dma_addr_t sbus_map_page(struct device *dev, struct page *page,
-			 unsigned long offset, size_t len, int direction)
+static dma_addr_t sbus_map_page(struct device *dev, struct page *page,
+				unsigned long offset, size_t len,
+				enum dma_data_direction dir,
+				struct dma_attrs *attrs)
 {
 	void *va = page_address(page) + offset;
 
@@ -353,12 +355,14 @@ dma_addr_t sbus_map_page(struct device *dev, struct page *page,
 	return mmu_get_scsi_one(dev, va, len);
 }
 
-void sbus_unmap_page(struct device *dev, dma_addr_t ba, size_t n, int direction)
+static void sbus_unmap_page(struct device *dev, dma_addr_t ba, size_t n,
+			    enum dma_data_direction dir, struct dma_attrs *attrs)
 {
 	mmu_release_scsi_one(dev, ba, n);
 }
 
-int sbus_map_sg(struct device *dev, struct scatterlist *sg, int n, int direction)
+static int sbus_map_sg(struct device *dev, struct scatterlist *sg, int n,
+		       enum dma_data_direction dir, struct dma_attrs *attrs)
 {
 	mmu_get_scsi_sgl(dev, sg, n);
 
@@ -369,19 +373,38 @@ int sbus_map_sg(struct device *dev, struct scatterlist *sg, int n, int direction
 	return n;
 }
 
-void sbus_unmap_sg(struct device *dev, struct scatterlist *sg, int n, int direction)
+static void sbus_unmap_sg(struct device *dev, struct scatterlist *sg, int n,
+			  enum dma_data_direction dir, struct dma_attrs *attrs)
 {
 	mmu_release_scsi_sgl(dev, sg, n);
 }
 
-void sbus_dma_sync_single_for_cpu(struct device *dev, dma_addr_t ba, size_t size, int direction)
+static void sbus_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
+				 int n,	enum dma_data_direction dir)
 {
+	BUG();
 }
 
-void sbus_dma_sync_single_for_device(struct device *dev, dma_addr_t ba, size_t size, int direction)
+static void sbus_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
+				    int n, enum dma_data_direction dir)
 {
+	BUG();
 }
 
+struct dma_map_ops sbus_dma_ops = {
+	.alloc_coherent		= sbus_alloc_coherent,
+	.free_coherent		= sbus_free_coherent,
+	.map_page		= sbus_map_page,
+	.unmap_page		= sbus_unmap_page,
+	.map_sg			= sbus_map_sg,
+	.unmap_sg		= sbus_unmap_sg,
+	.sync_sg_for_cpu	= sbus_sync_sg_for_cpu,
+	.sync_sg_for_device	= sbus_sync_sg_for_device,
+};
+
+struct dma_map_ops *dma_ops = &sbus_dma_ops;
+EXPORT_SYMBOL(dma_ops);
+
 static int __init sparc_register_ioport(void)
 {
 	register_proc_sparc_ioport();
@@ -398,7 +421,8 @@ arch_initcall(sparc_register_ioport);
 /* Allocate and map kernel buffer using consistent mode DMA for a device.
  * hwdev should be valid struct pci_dev pointer for PCI devices.
  */
-void *pci_alloc_consistent(struct pci_dev *pdev, size_t len, dma_addr_t *pba)
+static void *pci32_alloc_coherent(struct device *dev, size_t len,
+				  dma_addr_t *pba, gfp_t gfp)
 {
 	unsigned long len_total = (len + PAGE_SIZE-1) & PAGE_MASK;
 	unsigned long va;
@@ -442,7 +466,6 @@ void *pci_alloc_consistent(struct pci_dev *pdev, size_t len, dma_addr_t *pba)
 	*pba = virt_to_phys(va); /* equals virt_to_bus (R.I.P.) for us. */
 	return (void *) res->start;
 }
-EXPORT_SYMBOL(pci_alloc_consistent);
 
 /* Free and unmap a consistent DMA buffer.
  * cpu_addr is what was returned from pci_alloc_consistent,
@@ -452,7 +475,8 @@ EXPORT_SYMBOL(pci_alloc_consistent);
  * References to the memory and mappings associated with cpu_addr/dma_addr
  * past this call are illegal.
  */
-void pci_free_consistent(struct pci_dev *pdev, size_t n, void *p, dma_addr_t ba)
+static void pci32_free_coherent(struct device *dev, size_t n, void *p,
+				dma_addr_t ba)
 {
 	struct resource *res;
 	unsigned long pgp;
@@ -484,60 +508,18 @@ void pci_free_consistent(struct pci_dev *pdev, size_t n, void *p, dma_addr_t ba)
 
 	free_pages(pgp, get_order(n));
 }
-EXPORT_SYMBOL(pci_free_consistent);
-
-/* Map a single buffer of the indicated size for DMA in streaming mode.
- * The 32-bit bus address to use is returned.
- *
- * Once the device is given the dma address, the device owns this memory
- * until either pci_unmap_single or pci_dma_sync_single_* is performed.
- */
-dma_addr_t pci_map_single(struct pci_dev *hwdev, void *ptr, size_t size,
-    int direction)
-{
-	BUG_ON(direction == PCI_DMA_NONE);
-	/* IIep is write-through, not flushing. */
-	return virt_to_phys(ptr);
-}
-EXPORT_SYMBOL(pci_map_single);
-
-/* Unmap a single streaming mode DMA translation.  The dma_addr and size
- * must match what was provided for in a previous pci_map_single call.  All
- * other usages are undefined.
- *
- * After this call, reads by the cpu to the buffer are guaranteed to see
- * whatever the device wrote there.
- */
-void pci_unmap_single(struct pci_dev *hwdev, dma_addr_t ba, size_t size,
-    int direction)
-{
-	BUG_ON(direction == PCI_DMA_NONE);
-	if (direction != PCI_DMA_TODEVICE) {
-		mmu_inval_dma_area((unsigned long)phys_to_virt(ba),
-		    (size + PAGE_SIZE-1) & PAGE_MASK);
-	}
-}
-EXPORT_SYMBOL(pci_unmap_single);
 
 /*
  * Same as pci_map_single, but with pages.
  */
-dma_addr_t pci_map_page(struct pci_dev *hwdev, struct page *page,
-			unsigned long offset, size_t size, int direction)
+static dma_addr_t pci32_map_page(struct device *dev, struct page *page,
+				 unsigned long offset, size_t size,
+				 enum dma_data_direction dir,
+				 struct dma_attrs *attrs)
 {
-	BUG_ON(direction == PCI_DMA_NONE);
 	/* IIep is write-through, not flushing. */
 	return page_to_phys(page) + offset;
 }
-EXPORT_SYMBOL(pci_map_page);
-
-void pci_unmap_page(struct pci_dev *hwdev,
-			dma_addr_t dma_address, size_t size, int direction)
-{
-	BUG_ON(direction == PCI_DMA_NONE);
-	/* mmu_inval_dma_area XXX */
-}
-EXPORT_SYMBOL(pci_unmap_page);
 
 /* Map a set of buffers described by scatterlist in streaming
  * mode for DMA.  This is the scather-gather version of the
@@ -554,13 +536,13 @@ EXPORT_SYMBOL(pci_unmap_page);
  * Device ownership issues as mentioned above for pci_map_single are
  * the same here.
  */
-int pci_map_sg(struct pci_dev *hwdev, struct scatterlist *sgl, int nents,
-    int direction)
+static int pci32_map_sg(struct device *device, struct scatterlist *sgl,
+			int nents, enum dma_data_direction dir,
+			struct dma_attrs *attrs)
 {
 	struct scatterlist *sg;
 	int n;
 
-	BUG_ON(direction == PCI_DMA_NONE);
 	/* IIep is write-through, not flushing. */
 	for_each_sg(sgl, sg, nents, n) {
 		BUG_ON(page_address(sg_page(sg)) == NULL);
@@ -569,20 +551,19 @@ int pci_map_sg(struct pci_dev *hwdev, struct scatterlist *sgl, int nents,
 	}
 	return nents;
 }
-EXPORT_SYMBOL(pci_map_sg);
 
 /* Unmap a set of streaming mode DMA translations.
  * Again, cpu read rules concerning calls here are the same as for
  * pci_unmap_single() above.
  */
-void pci_unmap_sg(struct pci_dev *hwdev, struct scatterlist *sgl, int nents,
-    int direction)
+static void pci32_unmap_sg(struct device *dev, struct scatterlist *sgl,
+			   int nents, enum dma_data_direction dir,
+			   struct dma_attrs *attrs)
 {
 	struct scatterlist *sg;
 	int n;
 
-	BUG_ON(direction == PCI_DMA_NONE);
-	if (direction != PCI_DMA_TODEVICE) {
+	if (dir != PCI_DMA_TODEVICE) {
 		for_each_sg(sgl, sg, nents, n) {
 			BUG_ON(page_address(sg_page(sg)) == NULL);
 			mmu_inval_dma_area(
@@ -591,7 +572,6 @@ void pci_unmap_sg(struct pci_dev *hwdev, struct scatterlist *sgl, int nents,
 		}
 	}
 }
-EXPORT_SYMBOL(pci_unmap_sg);
 
 /* Make physical memory consistent for a single
  * streaming mode DMA translation before or after a transfer.
@@ -603,25 +583,23 @@ EXPORT_SYMBOL(pci_unmap_sg);
  * must first perform a pci_dma_sync_for_device, and then the
  * device again owns the buffer.
  */
-void pci_dma_sync_single_for_cpu(struct pci_dev *hwdev, dma_addr_t ba, size_t size, int direction)
+static void pci32_sync_single_for_cpu(struct device *dev, dma_addr_t ba,
+				      size_t size, enum dma_data_direction dir)
 {
-	BUG_ON(direction == PCI_DMA_NONE);
-	if (direction != PCI_DMA_TODEVICE) {
+	if (dir != PCI_DMA_TODEVICE) {
 		mmu_inval_dma_area((unsigned long)phys_to_virt(ba),
 		    (size + PAGE_SIZE-1) & PAGE_MASK);
 	}
 }
-EXPORT_SYMBOL(pci_dma_sync_single_for_cpu);
 
-void pci_dma_sync_single_for_device(struct pci_dev *hwdev, dma_addr_t ba, size_t size, int direction)
+static void pci32_sync_single_for_device(struct device *dev, dma_addr_t ba,
+					 size_t size, enum dma_data_direction dir)
 {
-	BUG_ON(direction == PCI_DMA_NONE);
-	if (direction != PCI_DMA_TODEVICE) {
+	if (dir != PCI_DMA_TODEVICE) {
 		mmu_inval_dma_area((unsigned long)phys_to_virt(ba),
 		    (size + PAGE_SIZE-1) & PAGE_MASK);
 	}
 }
-EXPORT_SYMBOL(pci_dma_sync_single_for_device);
 
 /* Make physical memory consistent for a set of streaming
  * mode DMA translations after a transfer.
@@ -629,13 +607,13 @@ EXPORT_SYMBOL(pci_dma_sync_single_for_device);
  * The same as pci_dma_sync_single_* but for a scatter-gather list,
  * same rules and usage.
  */
-void pci_dma_sync_sg_for_cpu(struct pci_dev *hwdev, struct scatterlist *sgl, int nents, int direction)
+static void pci32_sync_sg_for_cpu(struct device *dev, struct scatterlist *sgl,
+				  int nents, enum dma_data_direction dir)
 {
 	struct scatterlist *sg;
 	int n;
 
-	BUG_ON(direction == PCI_DMA_NONE);
-	if (direction != PCI_DMA_TODEVICE) {
+	if (dir != PCI_DMA_TODEVICE) {
 		for_each_sg(sgl, sg, nents, n) {
 			BUG_ON(page_address(sg_page(sg)) == NULL);
 			mmu_inval_dma_area(
@@ -644,15 +622,14 @@ void pci_dma_sync_sg_for_cpu(struct pci_dev *hwdev, struct scatterlist *sgl, int
 		}
 	}
 }
-EXPORT_SYMBOL(pci_dma_sync_sg_for_cpu);
 
-void pci_dma_sync_sg_for_device(struct pci_dev *hwdev, struct scatterlist *sgl, int nents, int direction)
+static void pci32_sync_sg_for_device(struct device *device, struct scatterlist *sgl,
+				     int nents, enum dma_data_direction dir)
 {
 	struct scatterlist *sg;
 	int n;
 
-	BUG_ON(direction == PCI_DMA_NONE);
-	if (direction != PCI_DMA_TODEVICE) {
+	if (dir != PCI_DMA_TODEVICE) {
 		for_each_sg(sgl, sg, nents, n) {
 			BUG_ON(page_address(sg_page(sg)) == NULL);
 			mmu_inval_dma_area(
@@ -661,7 +638,20 @@ void pci_dma_sync_sg_for_device(struct pci_dev *hwdev, struct scatterlist *sgl,
 		}
 	}
 }
-EXPORT_SYMBOL(pci_dma_sync_sg_for_device);
+
+struct dma_map_ops pci32_dma_ops = {
+	.alloc_coherent		= pci32_alloc_coherent,
+	.free_coherent		= pci32_free_coherent,
+	.map_page		= pci32_map_page,
+	.map_sg			= pci32_map_sg,
+	.unmap_sg		= pci32_unmap_sg,
+	.sync_single_for_cpu	= pci32_sync_single_for_cpu,
+	.sync_single_for_device	= pci32_sync_single_for_device,
+	.sync_sg_for_cpu	= pci32_sync_sg_for_cpu,
+	.sync_sg_for_device	= pci32_sync_sg_for_device,
+};
+EXPORT_SYMBOL(pci32_dma_ops);
+
 #endif /* CONFIG_PCI */
 
 #ifdef CONFIG_PROC_FS
diff --git a/arch/sparc/kernel/pci.c b/arch/sparc/kernel/pci.c
index 57859ad2354..c6864866280 100644
--- a/arch/sparc/kernel/pci.c
+++ b/arch/sparc/kernel/pci.c
@@ -1039,7 +1039,7 @@ static void ali_sound_dma_hack(struct pci_dev *pdev, int set_bit)
 	pci_dev_put(ali_isa_bridge);
 }
 
-int pci_dma_supported(struct pci_dev *pdev, u64 device_mask)
+int pci64_dma_supported(struct pci_dev *pdev, u64 device_mask)
 {
 	u64 dma_addr_mask;
 
-- 
cgit v1.2.3


From 451d7400a34cb679369e337d67f0238ed410f484 Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Mon, 10 Aug 2009 11:53:17 +0900
Subject: sparc: Add CONFIG_DMA_API_DEBUG support

All we need to do for CONFIG_DMA_API_DEBUG support is call
dma_debug_init() in DMA code common for SPARC32 and SPARC64.

Now SPARC32 uses two dma_map_ops structures for pci and sbus so
there is not much dma stuff for SPARC32 in kernel/dma.c.
kernel/ioport.c also includes dma stuff for SPARC32. So let's
put all the dma stuff for SPARC32 in kernel/ioport.c and make
kernel/dma.c common for SPARC32 and SPARC64.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Tested-by: Robert Reif <reif@earthlink.net>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: tony.luck@intel.com
Cc: fenghua.yu@intel.com
LKML-Reference: <1249872797-1314-9-git-send-email-fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/sparc/Kconfig                   |  1 +
 arch/sparc/include/asm/dma-mapping.h |  6 +++++-
 arch/sparc/kernel/Makefile           |  2 +-
 arch/sparc/kernel/dma.c              | 37 +++++-------------------------------
 arch/sparc/kernel/ioport.c           | 27 ++++++++++++++++++++++++++
 5 files changed, 39 insertions(+), 34 deletions(-)

(limited to 'arch')

diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 5f2df99645c..233cff53a62 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -26,6 +26,7 @@ config SPARC
 	select RTC_CLASS
 	select RTC_DRV_M48T59
 	select HAVE_DMA_ATTRS
+	select HAVE_DMA_API_DEBUG
 
 config SPARC32
 	def_bool !64BIT
diff --git a/arch/sparc/include/asm/dma-mapping.h b/arch/sparc/include/asm/dma-mapping.h
index 2677818dc78..5a8c308e2b5 100644
--- a/arch/sparc/include/asm/dma-mapping.h
+++ b/arch/sparc/include/asm/dma-mapping.h
@@ -32,8 +32,11 @@ static inline void *dma_alloc_coherent(struct device *dev, size_t size,
 				       dma_addr_t *dma_handle, gfp_t flag)
 {
 	struct dma_map_ops *ops = get_dma_ops(dev);
+	void *cpu_addr;
 
-	return ops->alloc_coherent(dev, size, dma_handle, flag);
+	cpu_addr = ops->alloc_coherent(dev, size, dma_handle, flag);
+	debug_dma_alloc_coherent(dev, size, *dma_handle, cpu_addr);
+	return cpu_addr;
 }
 
 static inline void dma_free_coherent(struct device *dev, size_t size,
@@ -41,6 +44,7 @@ static inline void dma_free_coherent(struct device *dev, size_t size,
 {
 	struct dma_map_ops *ops = get_dma_ops(dev);
 
+	debug_dma_free_coherent(dev, size, cpu_addr, dma_handle);
 	ops->free_coherent(dev, size, cpu_addr, dma_handle);
 }
 
diff --git a/arch/sparc/kernel/Makefile b/arch/sparc/kernel/Makefile
index 475ce4696ac..29b88a58066 100644
--- a/arch/sparc/kernel/Makefile
+++ b/arch/sparc/kernel/Makefile
@@ -61,7 +61,7 @@ obj-$(CONFIG_SPARC64_SMP) += cpumap.o
 obj-$(CONFIG_SPARC32)     += devres.o
 devres-y                  := ../../../kernel/irq/devres.o
 
-obj-$(CONFIG_SPARC32)     += dma.o
+obj-y                     += dma.o
 
 obj-$(CONFIG_SPARC32_PCI) += pcic.o
 
diff --git a/arch/sparc/kernel/dma.c b/arch/sparc/kernel/dma.c
index b2fa3127f60..e1ba8ee21b9 100644
--- a/arch/sparc/kernel/dma.c
+++ b/arch/sparc/kernel/dma.c
@@ -1,40 +1,13 @@
-/* dma.c: PCI and SBUS DMA accessors for 32-bit sparc.
- *
- * Copyright (C) 2008 David S. Miller <davem@davemloft.net>
- */
-
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/dma-mapping.h>
-#include <linux/scatterlist.h>
-#include <linux/mm.h>
+#include <linux/dma-debug.h>
 
-#ifdef CONFIG_PCI
-#include <linux/pci.h>
-#endif
+#define PREALLOC_DMA_DEBUG_ENTRIES       (1 << 15)
 
-/*
- * Return whether the given PCI device DMA address mask can be
- * supported properly.  For example, if your device can only drive the
- * low 24-bits during PCI bus mastering, then you would pass
- * 0x00ffffff as the mask to this function.
- */
-int dma_supported(struct device *dev, u64 mask)
+static int __init dma_init(void)
 {
-#ifdef CONFIG_PCI
-	if (dev->bus == &pci_bus_type)
-		return 1;
-#endif
+	dma_debug_init(PREALLOC_DMA_DEBUG_ENTRIES);
 	return 0;
 }
-EXPORT_SYMBOL(dma_supported);
-
-int dma_set_mask(struct device *dev, u64 dma_mask)
-{
-#ifdef CONFIG_PCI
-	if (dev->bus == &pci_bus_type)
-		return pci_set_dma_mask(to_pci_dev(dev), dma_mask);
-#endif
-	return -EOPNOTSUPP;
-}
-EXPORT_SYMBOL(dma_set_mask);
+fs_initcall(dma_init);
diff --git a/arch/sparc/kernel/ioport.c b/arch/sparc/kernel/ioport.c
index 1eb60438965..edbea232c61 100644
--- a/arch/sparc/kernel/ioport.c
+++ b/arch/sparc/kernel/ioport.c
@@ -654,6 +654,33 @@ EXPORT_SYMBOL(pci32_dma_ops);
 
 #endif /* CONFIG_PCI */
 
+/*
+ * Return whether the given PCI device DMA address mask can be
+ * supported properly.  For example, if your device can only drive the
+ * low 24-bits during PCI bus mastering, then you would pass
+ * 0x00ffffff as the mask to this function.
+ */
+int dma_supported(struct device *dev, u64 mask)
+{
+#ifdef CONFIG_PCI
+	if (dev->bus == &pci_bus_type)
+		return 1;
+#endif
+	return 0;
+}
+EXPORT_SYMBOL(dma_supported);
+
+int dma_set_mask(struct device *dev, u64 dma_mask)
+{
+#ifdef CONFIG_PCI
+	if (dev->bus == &pci_bus_type)
+		return pci_set_dma_mask(to_pci_dev(dev), dma_mask);
+#endif
+	return -EOPNOTSUPP;
+}
+EXPORT_SYMBOL(dma_set_mask);
+
+
 #ifdef CONFIG_PROC_FS
 
 static int
-- 
cgit v1.2.3


From c7425314c755d5f94da7c978205c85a7c6201212 Mon Sep 17 00:00:00 2001
From: Akinobu Mita <akinobu.mita@gmail.com>
Date: Sun, 9 Aug 2009 17:03:52 +0900
Subject: x86: Introduce GDT_ENTRY_INIT(), initialize bad_bios_desc statically

Fully initialize bad_bios_desc statically instead of doing some
fields statically and some dynamically.

Suggested-by: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
LKML-Reference: <20090809080350.GA4765@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/apm_32.c | 19 +++++++++----------
 1 file changed, 9 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c
index febb2dab254..39a4462ef8a 100644
--- a/arch/x86/kernel/apm_32.c
+++ b/arch/x86/kernel/apm_32.c
@@ -403,7 +403,15 @@ static DECLARE_WAIT_QUEUE_HEAD(apm_waitqueue);
 static DECLARE_WAIT_QUEUE_HEAD(apm_suspend_waitqueue);
 static struct apm_user *user_list;
 static DEFINE_SPINLOCK(user_list_lock);
-static struct desc_struct bad_bios_desc = GDT_ENTRY_INIT(0x4092, 0, 0);
+
+/*
+ * Set up a segment that references the real mode segment 0x40
+ * that extends up to the end of page zero (that we have reserved).
+ * This is for buggy BIOS's that refer to (real mode) segment 0x40
+ * even though they are called in protected mode.
+ */
+static struct desc_struct bad_bios_desc = GDT_ENTRY_INIT(0x4092,
+			(unsigned long)__va(0x400UL), PAGE_SIZE - 0x400 - 1);
 
 static const char driver_version[] = "1.16ac";	/* no spaces */
 
@@ -2331,15 +2339,6 @@ static int __init apm_init(void)
 	}
 	pm_flags |= PM_APM;
 
-	/*
-	 * Set up a segment that references the real mode segment 0x40
-	 * that extends up to the end of page zero (that we have reserved).
-	 * This is for buggy BIOS's that refer to (real mode) segment 0x40
-	 * even though they are called in protected mode.
-	 */
-	set_desc_base(&bad_bios_desc, (unsigned long)__va(0x40UL << 4));
-	set_desc_limit(&bad_bios_desc, 4095 - (0x40 << 4));
-
 	/*
 	 * Set up the long jump entry point to the APM BIOS, which is called
 	 * from inline assembly.
-- 
cgit v1.2.3


From 8f2208601f81b505710b0d13dbd80b687ccbca60 Mon Sep 17 00:00:00 2001
From: Simon Guinot <sguinot@lacie.com>
Date: Mon, 22 Jun 2009 21:45:01 +0200
Subject: [ARM] orion5x: Add LaCie NAS d2Network support

This patch add support for the d2 Network and the Big Disk Network
LaCie boards.

Signed-off-by: Simon Guinot <sguinot@lacie.com>
Acked-by: Christopher Moore <moore@free.fr>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
---
 arch/arm/mach-orion5x/Kconfig       |  14 ++
 arch/arm/mach-orion5x/Makefile      |   2 +
 arch/arm/mach-orion5x/d2net-setup.c | 365 ++++++++++++++++++++++++++++++++++++
 3 files changed, 381 insertions(+)
 create mode 100644 arch/arm/mach-orion5x/d2net-setup.c

(limited to 'arch')

diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig
index 2c7035d8dcb..5062b05b76b 100644
--- a/arch/arm/mach-orion5x/Kconfig
+++ b/arch/arm/mach-orion5x/Kconfig
@@ -89,6 +89,20 @@ config MACH_EDMINI_V2
 	  Say 'Y' here if you want your kernel to support the
 	  LaCie Ethernet Disk mini V2.
 
+config MACH_D2NET
+	bool "LaCie d2 Network"
+	select I2C_BOARDINFO
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  LaCie d2 Network NAS.
+
+config MACH_BIGDISK
+	bool "LaCie Big Disk Network"
+	select I2C_BOARDINFO
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  LaCie Big Disk Network NAS.
+
 config MACH_MSS2
 	bool "Maxtor Shared Storage II"
 	help
diff --git a/arch/arm/mach-orion5x/Makefile b/arch/arm/mach-orion5x/Makefile
index edc38e2c856..1db8a3a2708 100644
--- a/arch/arm/mach-orion5x/Makefile
+++ b/arch/arm/mach-orion5x/Makefile
@@ -12,6 +12,8 @@ obj-$(CONFIG_MACH_WRT350N_V2)	+= wrt350n-v2-setup.o
 obj-$(CONFIG_MACH_TS78XX)	+= ts78xx-setup.o
 obj-$(CONFIG_MACH_MV2120)	+= mv2120-setup.o
 obj-$(CONFIG_MACH_EDMINI_V2)	+= edmini_v2-setup.o
+obj-$(CONFIG_MACH_D2NET)	+= d2net-setup.o
+obj-$(CONFIG_MACH_BIGDISK)	+= d2net-setup.o
 obj-$(CONFIG_MACH_MSS2)		+= mss2-setup.o
 obj-$(CONFIG_MACH_WNR854T)	+= wnr854t-setup.o
 obj-$(CONFIG_MACH_RD88F5181L_GE)	+= rd88f5181l-ge-setup.o
diff --git a/arch/arm/mach-orion5x/d2net-setup.c b/arch/arm/mach-orion5x/d2net-setup.c
new file mode 100644
index 00000000000..9d4bf763f25
--- /dev/null
+++ b/arch/arm/mach-orion5x/d2net-setup.c
@@ -0,0 +1,365 @@
+/*
+ * arch/arm/mach-orion5x/d2net-setup.c
+ *
+ * LaCie d2Network and Big Disk Network NAS setup
+ *
+ * Copyright (C) 2009 Simon Guinot <sguinot@lacie.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/leds.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+#include <linux/ata_platform.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <mach/orion5x.h>
+#include "common.h"
+#include "mpp.h"
+
+/*****************************************************************************
+ * LaCie d2 Network Info
+ ****************************************************************************/
+
+/*
+ * 512KB NOR flash Device bus boot chip select
+ */
+
+#define D2NET_NOR_BOOT_BASE		0xfff80000
+#define D2NET_NOR_BOOT_SIZE		SZ_512K
+
+/*****************************************************************************
+ * 512KB NOR Flash on Boot Device
+ ****************************************************************************/
+
+/*
+ * TODO: Check write support on flash MX29LV400CBTC-70G
+ */
+
+static struct mtd_partition d2net_partitions[] = {
+	{
+		.name		= "Full512kb",
+		.size		= MTDPART_SIZ_FULL,
+		.offset		= 0,
+		.mask_flags	= MTD_WRITEABLE,
+	},
+};
+
+static struct physmap_flash_data d2net_nor_flash_data = {
+	.width		= 1,
+	.parts		= d2net_partitions,
+	.nr_parts	= ARRAY_SIZE(d2net_partitions),
+};
+
+static struct resource d2net_nor_flash_resource = {
+	.flags			= IORESOURCE_MEM,
+	.start			= D2NET_NOR_BOOT_BASE,
+	.end			= D2NET_NOR_BOOT_BASE
+					+ D2NET_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device d2net_nor_flash = {
+	.name			= "physmap-flash",
+	.id			= 0,
+	.dev		= {
+		.platform_data	= &d2net_nor_flash_data,
+	},
+	.num_resources		= 1,
+	.resource		= &d2net_nor_flash_resource,
+};
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+
+static struct mv643xx_eth_platform_data d2net_eth_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
+};
+
+/*****************************************************************************
+ * I2C devices
+ ****************************************************************************/
+
+/*
+ * i2c addr | chip         | description
+ * 0x32     | Ricoh 5C372b | RTC
+ * 0x3e     | GMT G762     | PWM fan controller
+ * 0x50     | HT24LC08     | eeprom (1kB)
+ *
+ * TODO: Add G762 support to the g760a driver.
+ */
+static struct i2c_board_info __initdata d2net_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("rs5c372b", 0x32),
+	}, {
+		I2C_BOARD_INFO("24c08", 0x50),
+	},
+};
+
+/*****************************************************************************
+ * SATA
+ ****************************************************************************/
+
+static struct mv_sata_platform_data d2net_sata_data = {
+	.n_ports	= 2,
+};
+
+#define D2NET_GPIO_SATA0_POWER	3
+#define D2NET_GPIO_SATA1_POWER	12
+
+static void __init d2net_sata_power_init(void)
+{
+	int err;
+
+	err = gpio_request(D2NET_GPIO_SATA0_POWER, "SATA0 power");
+	if (err == 0) {
+		err = gpio_direction_output(D2NET_GPIO_SATA0_POWER, 1);
+		if (err)
+			gpio_free(D2NET_GPIO_SATA0_POWER);
+	}
+	if (err)
+		pr_err("d2net: failed to configure SATA0 power GPIO\n");
+
+	err = gpio_request(D2NET_GPIO_SATA1_POWER, "SATA1 power");
+	if (err == 0) {
+		err = gpio_direction_output(D2NET_GPIO_SATA1_POWER, 1);
+		if (err)
+			gpio_free(D2NET_GPIO_SATA1_POWER);
+	}
+	if (err)
+		pr_err("d2net: failed to configure SATA1 power GPIO\n");
+}
+
+/*****************************************************************************
+ * GPIO LED's
+ ****************************************************************************/
+
+/*
+ * The blue front LED is wired to the CPLD and can blink in relation with the
+ * SATA activity. This feature is disabled to make this LED compatible with
+ * the leds-gpio driver: MPP14 and MPP15 are configured to act like output
+ * GPIO's and have to stay in an active state. This is needed to set the blue
+ * LED in a "fix on" state regardless of the SATA activity.
+ *
+ * The following array detail the different LED registers and the combination
+ * of their possible values:
+ *
+ * led_off   | blink_ctrl | SATA active | LED state
+ *           |            |             |
+ *    1      |     x      |      x      |  off
+ *    0      |     0      |      0      |  off
+ *    0      |     1      |      0      |  blink (rate 300ms)
+ *    0      |     x      |      1      |  on
+ *
+ * Notes: The blue and the red front LED's can't be on at the same time.
+ *        Red LED have priority.
+ */
+
+#define D2NET_GPIO_RED_LED		6
+#define D2NET_GPIO_BLUE_LED_BLINK_CTRL	16
+#define D2NET_GPIO_BLUE_LED_OFF		23
+#define D2NET_GPIO_SATA0_ACT		14
+#define D2NET_GPIO_SATA1_ACT		15
+
+static struct gpio_led d2net_leds[] = {
+	{
+		.name = "d2net:blue:power",
+		.gpio = D2NET_GPIO_BLUE_LED_OFF,
+		.active_low = 1,
+	},
+	{
+		.name = "d2net:red:fail",
+		.gpio = D2NET_GPIO_RED_LED,
+	},
+};
+
+static struct gpio_led_platform_data d2net_led_data = {
+	.num_leds = ARRAY_SIZE(d2net_leds),
+	.leds = d2net_leds,
+};
+
+static struct platform_device d2net_gpio_leds = {
+	.name           = "leds-gpio",
+	.id             = -1,
+	.dev            = {
+		.platform_data  = &d2net_led_data,
+	},
+};
+
+static void __init d2net_gpio_leds_init(void)
+{
+	/* Configure GPIO over MPP max number. */
+	orion_gpio_set_valid(D2NET_GPIO_BLUE_LED_OFF, 1);
+
+	if (gpio_request(D2NET_GPIO_SATA0_ACT, "LED SATA0 activity") != 0)
+		return;
+	if (gpio_direction_output(D2NET_GPIO_SATA0_ACT, 1) != 0)
+		goto err_free_1;
+	if (gpio_request(D2NET_GPIO_SATA1_ACT, "LED SATA1 activity") != 0)
+		goto err_free_1;
+	if (gpio_direction_output(D2NET_GPIO_SATA1_ACT, 1) != 0)
+		goto err_free_2;
+	platform_device_register(&d2net_gpio_leds);
+	return;
+
+err_free_2:
+	gpio_free(D2NET_GPIO_SATA1_ACT);
+err_free_1:
+	gpio_free(D2NET_GPIO_SATA0_ACT);
+	return;
+}
+
+/****************************************************************************
+ * GPIO keys
+ ****************************************************************************/
+
+#define D2NET_GPIO_PUSH_BUTTON		18
+#define D2NET_GPIO_POWER_SWITCH_ON	8
+#define D2NET_GPIO_POWER_SWITCH_OFF	9
+
+#define D2NET_SWITCH_POWER_ON		0x1
+#define D2NET_SWITCH_POWER_OFF		0x2
+
+static struct gpio_keys_button d2net_buttons[] = {
+	{
+		.type		= EV_SW,
+		.code		= D2NET_SWITCH_POWER_OFF,
+		.gpio		= D2NET_GPIO_POWER_SWITCH_OFF,
+		.desc		= "Power rocker switch (auto|off)",
+		.active_low	= 0,
+	},
+	{
+		.type		= EV_SW,
+		.code		= D2NET_SWITCH_POWER_ON,
+		.gpio		= D2NET_GPIO_POWER_SWITCH_ON,
+		.desc		= "Power rocker switch (on|auto)",
+		.active_low	= 0,
+	},
+	{
+		.type		= EV_KEY,
+		.code		= KEY_POWER,
+		.gpio		= D2NET_GPIO_PUSH_BUTTON,
+		.desc		= "Front Push Button",
+		.active_low	= 0,
+	},
+};
+
+static struct gpio_keys_platform_data d2net_button_data = {
+	.buttons	= d2net_buttons,
+	.nbuttons	= ARRAY_SIZE(d2net_buttons),
+};
+
+static struct platform_device d2net_gpio_buttons = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &d2net_button_data,
+	},
+};
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+
+static struct orion5x_mpp_mode d2net_mpp_modes[] __initdata = {
+	{  0, MPP_GPIO },	/* Board ID (bit 0) */
+	{  1, MPP_GPIO },	/* Board ID (bit 1) */
+	{  2, MPP_GPIO },	/* Board ID (bit 2) */
+	{  3, MPP_GPIO },	/* SATA 0 power */
+	{  4, MPP_UNUSED },
+	{  5, MPP_GPIO },	/* Fan fail detection */
+	{  6, MPP_GPIO },	/* Red front LED */
+	{  7, MPP_UNUSED },
+	{  8, MPP_GPIO },	/* Rear power switch (on|auto) */
+	{  9, MPP_GPIO },	/* Rear power switch (auto|off) */
+	{ 10, MPP_UNUSED },
+	{ 11, MPP_UNUSED },
+	{ 12, MPP_GPIO },	/* SATA 1 power */
+	{ 13, MPP_UNUSED },
+	{ 14, MPP_GPIO },	/* SATA 0 active */
+	{ 15, MPP_GPIO },	/* SATA 1 active */
+	{ 16, MPP_GPIO },	/* Blue front LED blink control */
+	{ 17, MPP_UNUSED },
+	{ 18, MPP_GPIO },	/* Front button (0 = Released, 1 = Pushed ) */
+	{ 19, MPP_UNUSED },
+	{ -1 }
+	/* 22: USB port 1 fuse (0 = Fail, 1 = Ok) */
+	/* 23: Blue front LED off */
+	/* 24: Inhibit board power off (0 = Disabled, 1 = Enabled) */
+};
+
+static void __init d2net_init(void)
+{
+	/*
+	 * Setup basic Orion functions. Need to be called early.
+	 */
+	orion5x_init();
+
+	orion5x_mpp_conf(d2net_mpp_modes);
+
+	/*
+	 * Configure peripherals.
+	 */
+	orion5x_ehci0_init();
+	orion5x_eth_init(&d2net_eth_data);
+	orion5x_i2c_init();
+	orion5x_uart0_init();
+
+	d2net_sata_power_init();
+	orion5x_sata_init(&d2net_sata_data);
+
+	orion5x_setup_dev_boot_win(D2NET_NOR_BOOT_BASE,
+				D2NET_NOR_BOOT_SIZE);
+	platform_device_register(&d2net_nor_flash);
+
+	platform_device_register(&d2net_gpio_buttons);
+
+	d2net_gpio_leds_init();
+
+	pr_notice("d2net: Flash write are not yet supported.\n");
+
+	i2c_register_board_info(0, d2net_i2c_devices,
+				ARRAY_SIZE(d2net_i2c_devices));
+}
+
+/* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */
+
+#ifdef CONFIG_MACH_D2NET
+MACHINE_START(D2NET, "LaCie d2 Network")
+	.phys_io	= ORION5X_REGS_PHYS_BASE,
+	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
+	.boot_params	= 0x00000100,
+	.init_machine	= d2net_init,
+	.map_io		= orion5x_map_io,
+	.init_irq	= orion5x_init_irq,
+	.timer		= &orion5x_timer,
+	.fixup		= tag_fixup_mem32,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_BIGDISK
+MACHINE_START(BIGDISK, "LaCie Big Disk Network")
+	.phys_io	= ORION5X_REGS_PHYS_BASE,
+	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
+	.boot_params	= 0x00000100,
+	.init_machine	= d2net_init,
+	.map_io		= orion5x_map_io,
+	.init_irq	= orion5x_init_irq,
+	.timer		= &orion5x_timer,
+	.fixup		= tag_fixup_mem32,
+MACHINE_END
+#endif
+
-- 
cgit v1.2.3


From aec1bad326a99a8b0860fa9d518985ee388c9391 Mon Sep 17 00:00:00 2001
From: Siddarth Gore <gores@marvell.com>
Date: Tue, 9 Jun 2009 14:41:02 +0530
Subject: [ARM] Kirkwood: Add support for 6281-A1

Signed-off-by: Siddarth Gore <gores@marvell.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
---
 arch/arm/mach-kirkwood/common.c                | 5 ++++-
 arch/arm/mach-kirkwood/include/mach/kirkwood.h | 1 +
 2 files changed, 5 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index 0f691983801..0acb61f3c10 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -838,7 +838,8 @@ int __init kirkwood_find_tclk(void)
 	u32 dev, rev;
 
 	kirkwood_pcie_id(&dev, &rev);
-	if (dev == MV88F6281_DEV_ID && rev == MV88F6281_REV_A0)
+	if (dev == MV88F6281_DEV_ID && (rev == MV88F6281_REV_A0 ||
+					rev == MV88F6281_REV_A1))
 		return 200000000;
 
 	return 166666667;
@@ -872,6 +873,8 @@ static char * __init kirkwood_id(void)
 			return "MV88F6281-Z0";
 		else if (rev == MV88F6281_REV_A0)
 			return "MV88F6281-A0";
+		else if (rev == MV88F6281_REV_A1)
+			return "MV88F6281-A1";
 		else
 			return "MV88F6281-Rev-Unsupported";
 	} else if (dev == MV88F6192_DEV_ID) {
diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
index 07af858814a..54c132731d2 100644
--- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h
+++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
@@ -101,6 +101,7 @@
 #define MV88F6281_DEV_ID	0x6281
 #define MV88F6281_REV_Z0	0
 #define MV88F6281_REV_A0	2
+#define MV88F6281_REV_A1	3
 
 #define MV88F6192_DEV_ID	0x6192
 #define MV88F6192_REV_Z0	0
-- 
cgit v1.2.3


From 7153c360ebe5bcfb1e6b7980b90584c75c8c8e4d Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Mon, 3 Aug 2009 16:25:12 +0200
Subject: =?UTF-8?q?=C2=B6ARM]=20Orion5x:=20fix=20cpu=20window=20mapping=20?=
 =?UTF-8?q?for=2088f6183?=
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

On the 88f6183, orion5x's setup_cpu_win() fails to ever program any
mbus bridge remap registers, which causes transactions for PCI/PCIe
IO/MEM space to get sent to random mbus targets.  Adding a check for
the 6183 in orion5x_cpu_win_can_remap() is necessary and sufficient
to make PCIe wlan cards work on the 6183 reference design.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
---
 arch/arm/mach-orion5x/addr-map.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-orion5x/addr-map.c b/arch/arm/mach-orion5x/addr-map.c
index d78731edebb..1a5d6a0e260 100644
--- a/arch/arm/mach-orion5x/addr-map.c
+++ b/arch/arm/mach-orion5x/addr-map.c
@@ -84,7 +84,8 @@ static int __init orion5x_cpu_win_can_remap(int win)
 	orion5x_pcie_id(&dev, &rev);
 	if ((dev == MV88F5281_DEV_ID && win < 4)
 	    || (dev == MV88F5182_DEV_ID && win < 2)
-	    || (dev == MV88F5181_DEV_ID && win < 2))
+	    || (dev == MV88F5181_DEV_ID && win < 2)
+	    || (dev == MV88F6183_DEV_ID && win < 4))
 		return 1;
 
 	return 0;
-- 
cgit v1.2.3


From 7eeae54c68e91c46ec170e764d1cceac81f35969 Mon Sep 17 00:00:00 2001
From: Dhaval Vasa <dhaval.vasa@einfochips.com>
Date: Mon, 10 Aug 2009 17:37:34 +0530
Subject: [ARM] Kirkwood: Marvell OpenRD-Base board support

reference:
http://open-rd.org
http://code.google.com/p/openrd

This patch is tested for:
1. Boot from DRAM/NAND flash
2. NAND read/write/erase
3. GbE0
4. USB read/write

FIXME:
1. SD/UART1 selection
2. MPP configuration (currently, default)
3. PEX

Signed-off-by: Dhaval Vasa <dhaval.vasa@einfochips.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
---
 arch/arm/mach-kirkwood/Kconfig             |  6 +++
 arch/arm/mach-kirkwood/Makefile            |  1 +
 arch/arm/mach-kirkwood/openrd_base-setup.c | 78 ++++++++++++++++++++++++++++++
 3 files changed, 85 insertions(+)
 create mode 100644 arch/arm/mach-kirkwood/openrd_base-setup.c

(limited to 'arch')

diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index 25100f7acf4..0aca451b216 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -38,6 +38,12 @@ config MACH_TS219
 	  Say 'Y' here if you want your kernel to support the
 	  QNAP TS-119 and TS-219 Turbo NAS devices.
 
+config MACH_OPENRD_BASE
+	bool "Marvell OpenRD Base Board"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Marvell OpenRD Base Board.
+
 endmenu
 
 endif
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index 9dd680e964d..80ab0ec90ee 100644
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -6,5 +6,6 @@ obj-$(CONFIG_MACH_RD88F6281)		+= rd88f6281-setup.o
 obj-$(CONFIG_MACH_MV88F6281GTW_GE)	+= mv88f6281gtw_ge-setup.o
 obj-$(CONFIG_MACH_SHEEVAPLUG)		+= sheevaplug-setup.o
 obj-$(CONFIG_MACH_TS219)		+= ts219-setup.o
+obj-$(CONFIG_MACH_OPENRD_BASE)		+= openrd_base-setup.o
 
 obj-$(CONFIG_CPU_IDLE)			+= cpuidle.o
diff --git a/arch/arm/mach-kirkwood/openrd_base-setup.c b/arch/arm/mach-kirkwood/openrd_base-setup.c
new file mode 100644
index 00000000000..3144bb87578
--- /dev/null
+++ b/arch/arm/mach-kirkwood/openrd_base-setup.c
@@ -0,0 +1,78 @@
+/*
+ * arch/arm/mach-kirkwood/openrd_base-setup.c
+ *
+ * Marvell OpenRD Base Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mv643xx_eth.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include <plat/mvsdio.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mtd_partition openrd_base_nand_parts[] = {
+	{
+		.name = "u-boot",
+		.offset = 0,
+		.size = SZ_1M
+	}, {
+		.name = "uImage",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = SZ_4M
+	}, {
+		.name = "root",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = MTDPART_SIZ_FULL
+	},
+};
+
+static struct mv643xx_eth_platform_data openrd_base_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
+};
+
+static struct mvsdio_platform_data openrd_base_mvsdio_data = {
+	.gpio_card_detect = 29,	/* MPP29 used as SD card detect */
+};
+
+static unsigned int openrd_base_mpp_config[] __initdata = {
+	MPP29_GPIO,
+	0
+};
+
+static void __init openrd_base_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_init();
+	kirkwood_mpp_conf(openrd_base_mpp_config);
+
+	kirkwood_uart0_init();
+	kirkwood_nand_init(ARRAY_AND_SIZE(openrd_base_nand_parts), 25);
+
+	kirkwood_ehci_init();
+
+	kirkwood_ge00_init(&openrd_base_ge00_data);
+	kirkwood_sdio_init(&openrd_base_mvsdio_data);
+}
+
+MACHINE_START(OPENRD_BASE, "Marvell OpenRD Base Board")
+	/* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
+	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
+	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.init_machine	= openrd_base_init,
+	.map_io		= kirkwood_map_io,
+	.init_irq	= kirkwood_init_irq,
+	.timer		= &kirkwood_timer,
+MACHINE_END
-- 
cgit v1.2.3


From decf77079511fc5ef832ead074bb45e4e0b099c0 Mon Sep 17 00:00:00 2001
From: Ron Lee <ron@debian.org>
Date: Mon, 10 Aug 2009 18:23:48 +0530
Subject: [ARM] Kirkwood: Initialise SATA for OpenRD-Base

Signed-off-by: Ron Lee <ron@debian.org>
Signed-off-by: Dhaval Vasa <dhaval.vasa@einfochips.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
---
 arch/arm/mach-kirkwood/openrd_base-setup.c | 6 ++++++
 1 file changed, 6 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-kirkwood/openrd_base-setup.c b/arch/arm/mach-kirkwood/openrd_base-setup.c
index 3144bb87578..947dfb8cd5b 100644
--- a/arch/arm/mach-kirkwood/openrd_base-setup.c
+++ b/arch/arm/mach-kirkwood/openrd_base-setup.c
@@ -12,6 +12,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/partitions.h>
+#include <linux/ata_platform.h>
 #include <linux/mv643xx_eth.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -40,6 +41,10 @@ static struct mv643xx_eth_platform_data openrd_base_ge00_data = {
 	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
 };
 
+static struct mv_sata_platform_data openrd_base_sata_data = {
+	.n_ports	= 2,
+};
+
 static struct mvsdio_platform_data openrd_base_mvsdio_data = {
 	.gpio_card_detect = 29,	/* MPP29 used as SD card detect */
 };
@@ -63,6 +68,7 @@ static void __init openrd_base_init(void)
 	kirkwood_ehci_init();
 
 	kirkwood_ge00_init(&openrd_base_ge00_data);
+	kirkwood_sata_init(&openrd_base_sata_data);
 	kirkwood_sdio_init(&openrd_base_mvsdio_data);
 }
 
-- 
cgit v1.2.3


From 81e2d7b30d718824434725a4a24d5864a71b1d30 Mon Sep 17 00:00:00 2001
From: "H. Peter Anvin" <hpa@zytor.com>
Date: Wed, 12 Aug 2009 05:45:34 -0700
Subject: x86, intel_txt: tboot.c needs <asm/fixmap.h>

arch/x86/kernel/tboot.c needs <asm/fixmap.h>.  In most configurations
that ends up getting implicitly included, but not in all, causing
build failures in some configurations.

Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Joseph Cihula <joseph.cihula@intel.com>
Cc: Shane Wang <shane.wang@intel.com>
---
 arch/x86/kernel/tboot.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/x86/kernel/tboot.c b/arch/x86/kernel/tboot.c
index 263591afd29..1ab80120894 100644
--- a/arch/x86/kernel/tboot.c
+++ b/arch/x86/kernel/tboot.c
@@ -33,6 +33,7 @@
 #include <asm/bootparam.h>
 #include <asm/pgtable.h>
 #include <asm/pgalloc.h>
+#include <asm/fixmap.h>
 #include <asm/setup.h>
 #include <asm/tboot.h>
 #include <asm/e820.h>
-- 
cgit v1.2.3


From b88fb83b138d4a377abea9461b2d58b9bf8ad9fe Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= <u.kleine-koenig@pengutronix.de>
Date: Thu, 13 Aug 2009 20:38:16 +0200
Subject: netx: Use get_irqnr_preamble to initialize base register
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

This patch optimizes the irq handling a bit.  Now the base register is
only computed once per irq exception instead of at least twice.
Moreover the mov+add sequence is simplified to an ldr (which might save
some cycles depending on memory timing).

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 arch/arm/mach-netx/include/mach/entry-macro.S | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-netx/include/mach/entry-macro.S b/arch/arm/mach-netx/include/mach/entry-macro.S
index a1952a0feda..844f1f9acbd 100644
--- a/arch/arm/mach-netx/include/mach/entry-macro.S
+++ b/arch/arm/mach-netx/include/mach/entry-macro.S
@@ -24,15 +24,13 @@
 		.endm
 
 		.macro  get_irqnr_preamble, base, tmp
+		ldr	\base, =io_p2v(0x001ff000)
 		.endm
 
 		.macro  arch_ret_to_user, tmp1, tmp2
 		.endm
 
 		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-		mov	\base, #io_p2v(0x00100000)
-		add	\base, \base, #0x000ff000
-
 		ldr	\irqstat, [\base, #0]
 		clz	\irqnr, \irqstat
 		rsb     \irqnr, \irqnr, #31
-- 
cgit v1.2.3


From 181f817eaaca4c1f8a9c265d339d2b96de8b245d Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= <u.kleine-koenig@pengutronix.de>
Date: Thu, 13 Aug 2009 20:38:16 +0200
Subject: [ARM] support tracing when using newer compilers
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Since gcc 4.4 the name and calling convention for function profiling
on ARM changed.  With this patch both types are supported.

See http://sourceware.org/ml/libc-ports/2008-04/msg00009.html for some
details.

Lightly-Tested-by: Anand Gadiyar <gadiyar@ti.com>
Tested-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 arch/arm/include/asm/ftrace.h  |  1 +
 arch/arm/kernel/armksyms.c     |  1 +
 arch/arm/kernel/entry-common.S | 19 +++++++++++++++++++
 3 files changed, 21 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/include/asm/ftrace.h b/arch/arm/include/asm/ftrace.h
index 39c8bc1a006..0d4c478e01b 100644
--- a/arch/arm/include/asm/ftrace.h
+++ b/arch/arm/include/asm/ftrace.h
@@ -7,6 +7,7 @@
 
 #ifndef __ASSEMBLY__
 extern void mcount(void);
+extern void __gnu_mcount_nc(void);
 #endif
 
 #endif
diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c
index 531e1860e54..0e627705f74 100644
--- a/arch/arm/kernel/armksyms.c
+++ b/arch/arm/kernel/armksyms.c
@@ -186,4 +186,5 @@ EXPORT_SYMBOL(_find_next_bit_be);
 
 #ifdef CONFIG_FUNCTION_TRACER
 EXPORT_SYMBOL(mcount);
+EXPORT_SYMBOL(__gnu_mcount_nc);
 #endif
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 366e5097a41..99208728d48 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -132,6 +132,25 @@ ftrace_call:
 
 #else
 
+ENTRY(__gnu_mcount_nc)
+	stmdb sp!, {r0-r3, lr}
+	ldr r0, =ftrace_trace_function
+	ldr r2, [r0]
+	adr r0, ftrace_stub
+	cmp r0, r2
+	bne gnu_trace
+	ldmia sp!, {r0-r3, ip, lr}
+	bx ip
+
+gnu_trace:
+	ldr r1, [sp, #20]			@ lr of instrumented routine
+	mov r0, lr
+	sub r0, r0, #MCOUNT_INSN_SIZE
+	mov lr, pc
+	mov pc, r2
+	ldmia sp!, {r0-r3, ip, lr}
+	bx ip
+
 ENTRY(mcount)
 	stmdb sp!, {r0-r3, lr}
 	ldr r0, =ftrace_trace_function
-- 
cgit v1.2.3


From 0d928b0b616d1c5c5fe76019a87cba171ca91633 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= <u.kleine-koenig@pengutronix.de>
Date: Thu, 13 Aug 2009 20:38:17 +0200
Subject: Complete irq tracing support for ARM
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Before this patch enabling and disabling irqs in assembler code and by
the hardware wasn't tracked completly.

I had to transpose two instructions in arch/arm/lib/bitops.h because
restore_irqs doesn't preserve the flags with CONFIG_TRACE_IRQFLAGS=y

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 arch/arm/include/asm/assembler.h | 49 ++++++++++++++++++++++++++++++++++++----
 arch/arm/kernel/entry-armv.S     | 10 ++++----
 arch/arm/lib/bitops.h            |  2 +-
 3 files changed, 49 insertions(+), 12 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h
index 15f8a092b70..44912cd5da1 100644
--- a/arch/arm/include/asm/assembler.h
+++ b/arch/arm/include/asm/assembler.h
@@ -74,23 +74,56 @@
  * Enable and disable interrupts
  */
 #if __LINUX_ARM_ARCH__ >= 6
-	.macro	disable_irq
+	.macro	disable_irq_notrace
 	cpsid	i
 	.endm
 
-	.macro	enable_irq
+	.macro	enable_irq_notrace
 	cpsie	i
 	.endm
 #else
-	.macro	disable_irq
+	.macro	disable_irq_notrace
 	msr	cpsr_c, #PSR_I_BIT | SVC_MODE
 	.endm
 
-	.macro	enable_irq
+	.macro	enable_irq_notrace
 	msr	cpsr_c, #SVC_MODE
 	.endm
 #endif
 
+	.macro asm_trace_hardirqs_off
+#if defined(CONFIG_TRACE_IRQFLAGS)
+	stmdb   sp!, {r0-r3, ip, lr}
+	bl	trace_hardirqs_off
+	ldmia	sp!, {r0-r3, ip, lr}
+#endif
+	.endm
+
+	.macro asm_trace_hardirqs_on_cond, cond
+#if defined(CONFIG_TRACE_IRQFLAGS)
+	/*
+	 * actually the registers should be pushed and pop'd conditionally, but
+	 * after bl the flags are certainly clobbered
+	 */
+	stmdb   sp!, {r0-r3, ip, lr}
+	bl\cond	trace_hardirqs_on
+	ldmia	sp!, {r0-r3, ip, lr}
+#endif
+	.endm
+
+	.macro asm_trace_hardirqs_on
+	asm_trace_hardirqs_on_cond al
+	.endm
+
+	.macro disable_irq
+	disable_irq_notrace
+	asm_trace_hardirqs_off
+	.endm
+
+	.macro enable_irq
+	asm_trace_hardirqs_on
+	enable_irq_notrace
+	.endm
 /*
  * Save the current IRQ state and disable IRQs.  Note that this macro
  * assumes FIQs are enabled, and that the processor is in SVC mode.
@@ -104,10 +137,16 @@
  * Restore interrupt state previously stored in a register.  We don't
  * guarantee that this will preserve the flags.
  */
-	.macro	restore_irqs, oldcpsr
+	.macro	restore_irqs_notrace, oldcpsr
 	msr	cpsr_c, \oldcpsr
 	.endm
 
+	.macro restore_irqs, oldcpsr
+	tst	\oldcpsr, #PSR_I_BIT
+	asm_trace_hardirqs_on_cond eq
+	restore_irqs_notrace \oldcpsr
+	.endm
+
 #define USER(x...)				\
 9999:	x;					\
 	.section __ex_table,"a";		\
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index fc8af43c500..792abd0dfae 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -151,6 +151,8 @@ ENDPROC(__und_invalid)
 	@  r4 - orig_r0 (see pt_regs definition in ptrace.h)
 	@
 	stmia	r5, {r0 - r4}
+
+	asm_trace_hardirqs_off
 	.endm
 
 	.align	5
@@ -206,9 +208,6 @@ ENDPROC(__dabt_svc)
 __irq_svc:
 	svc_entry
 
-#ifdef CONFIG_TRACE_IRQFLAGS
-	bl	trace_hardirqs_off
-#endif
 #ifdef CONFIG_PREEMPT
 	get_thread_info tsk
 	ldr	r8, [tsk, #TI_PREEMPT]		@ get preempt count
@@ -383,6 +382,8 @@ ENDPROC(__pabt_svc)
 	@ Clear FP to mark the first stack frame
 	@
 	zero_fp
+
+	asm_trace_hardirqs_off
 	.endm
 
 	.macro	kuser_cmpxchg_check
@@ -437,9 +438,6 @@ __irq_usr:
 	usr_entry
 	kuser_cmpxchg_check
 
-#ifdef CONFIG_TRACE_IRQFLAGS
-	bl	trace_hardirqs_off
-#endif
 	get_thread_info tsk
 #ifdef CONFIG_PREEMPT
 	ldr	r8, [tsk, #TI_PREEMPT]		@ get preempt count
diff --git a/arch/arm/lib/bitops.h b/arch/arm/lib/bitops.h
index c7f2627385e..d42252918bf 100644
--- a/arch/arm/lib/bitops.h
+++ b/arch/arm/lib/bitops.h
@@ -60,8 +60,8 @@
 	tst	r2, r0, lsl r3
 	\instr	r2, r2, r0, lsl r3
 	\store	r2, [r1]
-	restore_irqs ip
 	moveq	r0, #0
+	restore_irqs ip
 	mov	pc, lr
 	.endm
 #endif
-- 
cgit v1.2.3


From d45a398fca6b03f16d01c9253c3a8c96d804f532 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= <u.kleine-koenig@pengutronix.de>
Date: Thu, 13 Aug 2009 20:38:17 +0200
Subject: Use kernel/Kconfig.preempt for ARM
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

before this patch ARM had it's own definition of CONFIG_PREEMPT.
Instead of that use the general definition provided in
kernel/Kconfig.preempt.

This patch changes the available options in *config.  Namely PREEMPT
isn't a stand alone bool anymore, but part of a 'choice' the
following Kconfig symbols are added:

	PREEMPT_NONE
	PREEMPT_VOLUNTARY

Selecting PREEMPT_NONE now produces exactly the code as not selecting
PREEMPT before (apart from a comment in
/sys/kernel/debug/tracing/(per_cpu/cpuX/)?trace).  The only difference
PREEMPT_VOLUNTARY does is that might_resched might reschedule.  Both
should't introduce regressions.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Russell King <linux@arm.linux.org.uk>
---
 arch/arm/Kconfig | 13 +------------
 1 file changed, 1 insertion(+), 12 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index aef63c8e3d2..eac1a927ca6 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -962,18 +962,7 @@ config LOCAL_TIMERS
 	  accounting to be spread across the timer interval, preventing a
 	  "thundering herd" at every timer tick.
 
-config PREEMPT
-	bool "Preemptible Kernel (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
-	help
-	  This option reduces the latency of the kernel when reacting to
-	  real-time or interactive events by allowing a low priority process to
-	  be preempted even if it is in kernel mode executing a system call.
-	  This allows applications to run more reliably even when the system is
-	  under load.
-
-	  Say Y here if you are building a kernel for a desktop, embedded
-	  or real-time system.  Say N if you are unsure.
+source kernel/Kconfig.preempt
 
 config HZ
 	int
-- 
cgit v1.2.3


From ac25150f2c55ea26447af0fa1d4e2bb07f97384d Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= <u.kleine-koenig@pengutronix.de>
Date: Thu, 13 Aug 2009 21:09:21 +0200
Subject: [ARM] let arch/arm/Kconfig source drivers/Kconfig
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

The changes introduced by this change are:
  - drivers/mtd/Kconfig doesn't depend on ALIGNMENT_TRAP ||
    !CPU_CP15_MMU any more
  - the following files are sourced additionally:
    + drivers/macintosh/Kconfig
      completely depends on PPC || MAC || X86
    + drivers/telephony/Kconfig
      new
    + drivers/pps/Kconfig
      new
    + drivers/infiniband/Kconfig
      new
    + drivers/edac/Kconfig
      depends on X86 || PPC
    + drivers/vlynq/Kconfig
      depends on AR7 && EXPERIMENTAL (that is ARCH_MIPS)
    + drivers/xen/Kconfig
      everything depends on XEN
    + drivers/platform/Kconfig
      depends on X86
  - drivers/regulator/Kconfig is sourced later as is
    drivers/accessibility/Kconfig

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 arch/arm/Kconfig | 102 +------------------------------------------------------
 1 file changed, 1 insertion(+), 101 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index eac1a927ca6..a7eb44a1955 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1366,107 +1366,7 @@ endmenu
 
 source "net/Kconfig"
 
-menu "Device Drivers"
-
-source "drivers/base/Kconfig"
-
-source "drivers/connector/Kconfig"
-
-if ALIGNMENT_TRAP || !CPU_CP15_MMU
-source "drivers/mtd/Kconfig"
-endif
-
-source "drivers/parport/Kconfig"
-
-source "drivers/pnp/Kconfig"
-
-source "drivers/block/Kconfig"
-
-# misc before ide - BLK_DEV_SGIIOC4 depends on SGI_IOC4
-
-source "drivers/misc/Kconfig"
-
-source "drivers/ide/Kconfig"
-
-source "drivers/scsi/Kconfig"
-
-source "drivers/ata/Kconfig"
-
-source "drivers/md/Kconfig"
-
-source "drivers/message/fusion/Kconfig"
-
-source "drivers/ieee1394/Kconfig"
-
-source "drivers/message/i2o/Kconfig"
-
-source "drivers/net/Kconfig"
-
-source "drivers/isdn/Kconfig"
-
-# input before char - char/joystick depends on it. As does USB.
-
-source "drivers/input/Kconfig"
-
-source "drivers/char/Kconfig"
-
-source "drivers/i2c/Kconfig"
-
-source "drivers/spi/Kconfig"
-
-source "drivers/gpio/Kconfig"
-
-source "drivers/w1/Kconfig"
-
-source "drivers/power/Kconfig"
-
-source "drivers/hwmon/Kconfig"
-
-source "drivers/thermal/Kconfig"
-
-source "drivers/watchdog/Kconfig"
-
-source "drivers/ssb/Kconfig"
-
-#source "drivers/l3/Kconfig"
-
-source "drivers/mfd/Kconfig"
-
-source "drivers/media/Kconfig"
-
-source "drivers/video/Kconfig"
-
-source "sound/Kconfig"
-
-source "drivers/hid/Kconfig"
-
-source "drivers/usb/Kconfig"
-
-source "drivers/uwb/Kconfig"
-
-source "drivers/mmc/Kconfig"
-
-source "drivers/memstick/Kconfig"
-
-source "drivers/accessibility/Kconfig"
-
-source "drivers/leds/Kconfig"
-
-source "drivers/rtc/Kconfig"
-
-source "drivers/dma/Kconfig"
-
-source "drivers/dca/Kconfig"
-
-source "drivers/auxdisplay/Kconfig"
-
-source "drivers/regulator/Kconfig"
-
-source "drivers/uio/Kconfig"
-
-source "drivers/staging/Kconfig"
-
-endmenu
+source "drivers/Kconfig"
 
 source "fs/Kconfig"
 
-- 
cgit v1.2.3


From 4ac0478f2afaf8e778b4190d6218459a9dbf2a8f Mon Sep 17 00:00:00 2001
From: Marek Vasut <marek.vasut@gmail.com>
Date: Thu, 30 Jul 2009 02:55:01 +0200
Subject: ALSA: Allow passing platform_data for pxa2xx-ac97

This patch adds support for passing platform data to ac97 bus devices
from PXA2xx-AC97 driver..

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 arch/arm/mach-pxa/include/mach/audio.h | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/include/mach/audio.h b/arch/arm/mach-pxa/include/mach/audio.h
index 16eb02552d5..a3449e35a6f 100644
--- a/arch/arm/mach-pxa/include/mach/audio.h
+++ b/arch/arm/mach-pxa/include/mach/audio.h
@@ -3,10 +3,12 @@
 
 #include <sound/core.h>
 #include <sound/pcm.h>
+#include <sound/ac97_codec.h>
 
 /*
  * @reset_gpio: AC97 reset gpio (normally gpio113 or gpio95)
  *              a -1 value means no gpio will be used for reset
+ * @codec_pdata: AC97 codec platform_data
 
  * reset_gpio should only be specified for pxa27x CPUs where a silicon
  * bug prevents correct operation of the reset line. If not specified,
@@ -20,6 +22,7 @@ typedef struct {
 	void (*resume)(void *);
 	void *priv;
 	int reset_gpio;
+	void *codec_pdata[AC97_BUS_MAX_DEVICES];
 } pxa2xx_audio_ops_t;
 
 extern void pxa_set_ac97_info(pxa2xx_audio_ops_t *ops);
-- 
cgit v1.2.3


From 4d4e2bc268e188a8793ce96af20576374098c17b Mon Sep 17 00:00:00 2001
From: Marek Szyprowski <m.szyprowski@samsung.com>
Date: Wed, 24 Jun 2009 08:05:43 +0200
Subject: ARM: NCP: make ncp_iodesc static and move it to initdata section

Make ncp_iodesc struct static to clean a public namespace a bit and move
it to __initdata section to save memory a bit.

Reviewed-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c6410/mach-ncp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-s3c6410/mach-ncp.c b/arch/arm/mach-s3c6410/mach-ncp.c
index 6030636f854..55e9bbfaf68 100644
--- a/arch/arm/mach-s3c6410/mach-ncp.c
+++ b/arch/arm/mach-s3c6410/mach-ncp.c
@@ -79,7 +79,7 @@ static struct platform_device *ncp_devices[] __initdata = {
 	&s3c_device_i2c0,
 };
 
-struct map_desc ncp_iodesc[] = {};
+static struct map_desc ncp_iodesc[] __initdata = {};
 
 static void __init ncp_map_io(void)
 {
-- 
cgit v1.2.3


From bd258e525a40efc2c3798b76a725cd3d5c4e3d93 Mon Sep 17 00:00:00 2001
From: Matt Hsu <matt@0xlab.org>
Date: Mon, 29 Jun 2009 19:03:41 +0800
Subject: ARM: S3C64XX: Add UART2,UART3 support for SMDK6410 (resend)

Add proper uartcfg for UART port 2,3 and tidy it up on SMDK6410.

Signed-off-by: Matt Hsu <matt@0xlab.org>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c6410/mach-smdk6410.c | 26 ++++++++++++++++++++------
 1 file changed, 20 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-s3c6410/mach-smdk6410.c b/arch/arm/mach-s3c6410/mach-smdk6410.c
index bc9a7dea567..ea51dbe76e3 100644
--- a/arch/arm/mach-s3c6410/mach-smdk6410.c
+++ b/arch/arm/mach-s3c6410/mach-smdk6410.c
@@ -65,16 +65,30 @@ static struct s3c2410_uartcfg smdk6410_uartcfgs[] __initdata = {
 	[0] = {
 		.hwport	     = 0,
 		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
 	},
 	[1] = {
 		.hwport	     = 1,
 		.flags	     = 0,
-		.ucon	     = 0x3c5,
-		.ulcon	     = 0x03,
-		.ufcon	     = 0x51,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[2] = {
+		.hwport	     = 2,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[3] = {
+		.hwport	     = 3,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
 	},
 };
 
-- 
cgit v1.2.3


From 25b15da14a789846672e73d19862b5fe5ad14346 Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Tue, 4 Aug 2009 16:25:12 +0100
Subject: ARM: S3C64XX: Add mapping for IISv4 port

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c6400/include/mach/map.h | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/arm/mach-s3c6400/include/mach/map.h b/arch/arm/mach-s3c6400/include/mach/map.h
index 5057d9948d3..41d01a91a5a 100644
--- a/arch/arm/mach-s3c6400/include/mach/map.h
+++ b/arch/arm/mach-s3c6400/include/mach/map.h
@@ -46,6 +46,7 @@
 #define S3C64XX_PA_IIS1		(0x7F003000)
 #define S3C64XX_PA_TIMER	(0x7F006000)
 #define S3C64XX_PA_IIC0		(0x7F004000)
+#define S3C64XX_PA_IISV4	(0x7F00D000)
 #define S3C64XX_PA_IIC1		(0x7F00F000)
 
 #define S3C64XX_PA_GPIO		(0x7F008000)
-- 
cgit v1.2.3


From c7c8f615c8d1b49225ed86406603e7ac24d2a6d9 Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Wed, 5 Aug 2009 18:21:59 +0100
Subject: ARM: S3C64XX: Add address mapping for AC97 controller

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c6400/include/mach/map.h | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/arm/mach-s3c6400/include/mach/map.h b/arch/arm/mach-s3c6400/include/mach/map.h
index 41d01a91a5a..9fdf87ae47c 100644
--- a/arch/arm/mach-s3c6400/include/mach/map.h
+++ b/arch/arm/mach-s3c6400/include/mach/map.h
@@ -42,6 +42,7 @@
 #define S3C64XX_PA_USB_HSOTG	(0x7C000000)
 #define S3C64XX_PA_WATCHDOG	(0x7E004000)
 #define S3C64XX_PA_SYSCON	(0x7E00F000)
+#define S3C64XX_PA_AC97		(0x7F001000)
 #define S3C64XX_PA_IIS0		(0x7F002000)
 #define S3C64XX_PA_IIS1		(0x7F003000)
 #define S3C64XX_PA_TIMER	(0x7F006000)
-- 
cgit v1.2.3


From c233d94931cebc8ec805fb98856f34ad16d49e4f Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Wed, 5 Aug 2009 18:21:57 +0100
Subject: ARM: S3C: Move S3C64xx audio devices into S3C64xx directory

Allowing us to make the Kconfig a little bit saner.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c/Makefile        |  1 -
 arch/arm/plat-s3c/dev-audio.c     | 68 ---------------------------------------
 arch/arm/plat-s3c64xx/Makefile    |  3 +-
 arch/arm/plat-s3c64xx/dev-audio.c | 68 +++++++++++++++++++++++++++++++++++++++
 4 files changed, 70 insertions(+), 70 deletions(-)
 delete mode 100644 arch/arm/plat-s3c/dev-audio.c
 create mode 100644 arch/arm/plat-s3c64xx/dev-audio.c

(limited to 'arch')

diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile
index 3e27720ae35..f32d045e7e3 100644
--- a/arch/arm/plat-s3c/Makefile
+++ b/arch/arm/plat-s3c/Makefile
@@ -38,7 +38,6 @@ obj-$(CONFIG_S3C_DEV_HSMMC)	+= dev-hsmmc.o
 obj-$(CONFIG_S3C_DEV_HSMMC1)	+= dev-hsmmc1.o
 obj-y				+= dev-i2c0.o
 obj-$(CONFIG_S3C_DEV_I2C1)	+= dev-i2c1.o
-obj-$(CONFIG_SND_S3C64XX_SOC_I2S)	+= dev-audio.o
 obj-$(CONFIG_S3C_DEV_FB)	+= dev-fb.o
 obj-$(CONFIG_S3C_DEV_USB_HOST)	+= dev-usb.o
 obj-$(CONFIG_S3C_DEV_USB_HSOTG)	+= dev-usb-hsotg.o
diff --git a/arch/arm/plat-s3c/dev-audio.c b/arch/arm/plat-s3c/dev-audio.c
deleted file mode 100644
index 1322beb40dd..00000000000
--- a/arch/arm/plat-s3c/dev-audio.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/* linux/arch/arm/plat-s3c/dev-audio.c
- *
- * Copyright 2009 Wolfson Microelectronics
- *      Mark Brown <broonie@opensource.wolfsonmicro.com>
- *
-
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/platform_device.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-
-#include <plat/devs.h>
-
-
-static struct resource s3c64xx_iis0_resource[] = {
-	[0] = {
-		.start = S3C64XX_PA_IIS0,
-		.end   = S3C64XX_PA_IIS0 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-struct platform_device s3c64xx_device_iis0 = {
-	.name		  = "s3c64xx-iis",
-	.id		  = 0,
-	.num_resources	  = ARRAY_SIZE(s3c64xx_iis0_resource),
-	.resource	  = s3c64xx_iis0_resource,
-};
-EXPORT_SYMBOL(s3c64xx_device_iis0);
-
-static struct resource s3c64xx_iis1_resource[] = {
-	[0] = {
-		.start = S3C64XX_PA_IIS1,
-		.end   = S3C64XX_PA_IIS1 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-struct platform_device s3c64xx_device_iis1 = {
-	.name		  = "s3c64xx-iis",
-	.id		  = 1,
-	.num_resources	  = ARRAY_SIZE(s3c64xx_iis1_resource),
-	.resource	  = s3c64xx_iis1_resource,
-};
-EXPORT_SYMBOL(s3c64xx_device_iis1);
-
-static struct resource s3c64xx_iisv4_resource[] = {
-	[0] = {
-		.start = S3C64XX_PA_IISV4,
-		.end   = S3C64XX_PA_IISV4 + 0x100 - 1,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-struct platform_device s3c64xx_device_iisv4 = {
-	.name		  = "s3c64xx-iis-v4",
-	.id		  = -1,
-	.num_resources	  = ARRAY_SIZE(s3c64xx_iisv4_resource),
-	.resource	  = s3c64xx_iisv4_resource,
-};
-EXPORT_SYMBOL(s3c64xx_device_iisv4);
diff --git a/arch/arm/plat-s3c64xx/Makefile b/arch/arm/plat-s3c64xx/Makefile
index 3c8882cd626..b85b4359e93 100644
--- a/arch/arm/plat-s3c64xx/Makefile
+++ b/arch/arm/plat-s3c64xx/Makefile
@@ -40,4 +40,5 @@ obj-$(CONFIG_S3C64XX_DMA)	+= dma.o
 obj-$(CONFIG_S3C64XX_SETUP_I2C0) += setup-i2c0.o
 obj-$(CONFIG_S3C64XX_SETUP_I2C1) += setup-i2c1.o
 obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP) += setup-fb-24bpp.o
-obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
\ No newline at end of file
+obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
+obj-$(CONFIG_SND_S3C24XX_SOC) += dev-audio.o
diff --git a/arch/arm/plat-s3c64xx/dev-audio.c b/arch/arm/plat-s3c64xx/dev-audio.c
new file mode 100644
index 00000000000..1322beb40dd
--- /dev/null
+++ b/arch/arm/plat-s3c64xx/dev-audio.c
@@ -0,0 +1,68 @@
+/* linux/arch/arm/plat-s3c/dev-audio.c
+ *
+ * Copyright 2009 Wolfson Microelectronics
+ *      Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include <plat/devs.h>
+
+
+static struct resource s3c64xx_iis0_resource[] = {
+	[0] = {
+		.start = S3C64XX_PA_IIS0,
+		.end   = S3C64XX_PA_IIS0 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+struct platform_device s3c64xx_device_iis0 = {
+	.name		  = "s3c64xx-iis",
+	.id		  = 0,
+	.num_resources	  = ARRAY_SIZE(s3c64xx_iis0_resource),
+	.resource	  = s3c64xx_iis0_resource,
+};
+EXPORT_SYMBOL(s3c64xx_device_iis0);
+
+static struct resource s3c64xx_iis1_resource[] = {
+	[0] = {
+		.start = S3C64XX_PA_IIS1,
+		.end   = S3C64XX_PA_IIS1 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+struct platform_device s3c64xx_device_iis1 = {
+	.name		  = "s3c64xx-iis",
+	.id		  = 1,
+	.num_resources	  = ARRAY_SIZE(s3c64xx_iis1_resource),
+	.resource	  = s3c64xx_iis1_resource,
+};
+EXPORT_SYMBOL(s3c64xx_device_iis1);
+
+static struct resource s3c64xx_iisv4_resource[] = {
+	[0] = {
+		.start = S3C64XX_PA_IISV4,
+		.end   = S3C64XX_PA_IISV4 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+struct platform_device s3c64xx_device_iisv4 = {
+	.name		  = "s3c64xx-iis-v4",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(s3c64xx_iisv4_resource),
+	.resource	  = s3c64xx_iisv4_resource,
+};
+EXPORT_SYMBOL(s3c64xx_device_iisv4);
-- 
cgit v1.2.3


From 229fd8ffba57dfaea59078b9144371369ffdb0a3 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Mon, 3 Aug 2009 17:26:57 +0100
Subject: ARM: S3C24XX: Add FIQ IRQ routing support

Add support for routing an IRQ from the normal ARM IRQ mechanism to the
FIQ input of the processor.

Note, also fix a bug where the init_FIQ() function has not been called
when CONFIG_FIQ is enabled.

Signed-off-by; Ben Dooks <ben@simtec.co.uk>

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c24xx/include/plat/fiq.h | 13 ++++++++++++
 arch/arm/plat-s3c24xx/irq.c              | 36 ++++++++++++++++++++++++++++++++
 2 files changed, 49 insertions(+)
 create mode 100644 arch/arm/plat-s3c24xx/include/plat/fiq.h

(limited to 'arch')

diff --git a/arch/arm/plat-s3c24xx/include/plat/fiq.h b/arch/arm/plat-s3c24xx/include/plat/fiq.h
new file mode 100644
index 00000000000..8521b8372c5
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/include/plat/fiq.h
@@ -0,0 +1,13 @@
+/* linux/include/asm-arm/plat-s3c24xx/fiq.h
+ *
+ * Copyright (c) 2009 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for S3C24XX CPU FIQ support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+extern int s3c24xx_set_fiq(unsigned int irq, bool on);
diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c
index 958737775ad..d02f5f02045 100644
--- a/arch/arm/plat-s3c24xx/irq.c
+++ b/arch/arm/plat-s3c24xx/irq.c
@@ -493,6 +493,38 @@ s3c_irq_demux_extint4t7(unsigned int irq,
 	}
 }
 
+#ifdef CONFIG_FIQ
+/**
+ * s3c24xx_set_fiq - set the FIQ routing
+ * @irq: IRQ number to route to FIQ on processor.
+ * @on: Whether to route @irq to the FIQ, or to remove the FIQ routing.
+ *
+ * Change the state of the IRQ to FIQ routing depending on @irq and @on. If
+ * @on is true, the @irq is checked to see if it can be routed and the
+ * interrupt controller updated to route the IRQ. If @on is false, the FIQ
+ * routing is cleared, regardless of which @irq is specified.
+ */
+int s3c24xx_set_fiq(unsigned int irq, bool on)
+{
+	u32 intmod;
+	unsigned offs;
+
+	if (on) {
+		offs = irq - FIQ_START;
+		if (offs > 31)
+			return -EINVAL;
+
+		intmod = 1 << offs;
+	} else {
+		intmod = 0;
+	}
+
+	__raw_writel(intmod, S3C2410_INTMOD);
+	return 0;
+}
+#endif
+
+
 /* s3c24xx_init_irq
  *
  * Initialise S3C2410 IRQ system
@@ -505,6 +537,10 @@ void __init s3c24xx_init_irq(void)
 	int irqno;
 	int i;
 
+#ifdef CONFIG_FIQ
+	init_FIQ();
+#endif
+
 	irqdbf("s3c2410_init_irq: clearing interrupt status flags\n");
 
 	/* first, clear all interrupts pending... */
-- 
cgit v1.2.3


From d91e9a7ab93e09e5a0fbed73f3a6a330f14620a4 Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Wed, 5 Aug 2009 18:29:57 +0100
Subject: ARM: S3C24XX: Add platform device for AC97 controller

Move the definition of the "generic" IRQ in the process.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2410/include/mach/irqs.h |  6 ++++
 arch/arm/plat-s3c/include/plat/devs.h     |  1 +
 arch/arm/plat-s3c24xx/devs.c              | 50 +++++++++++++++++++++++++++++++
 3 files changed, 57 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-s3c2410/include/mach/irqs.h b/arch/arm/mach-s3c2410/include/mach/irqs.h
index 2a2384ffa7b..6c12c6312ad 100644
--- a/arch/arm/mach-s3c2410/include/mach/irqs.h
+++ b/arch/arm/mach-s3c2410/include/mach/irqs.h
@@ -164,6 +164,12 @@
 #define IRQ_S3CUART_TX3		IRQ_S3C2443_TX3
 #define IRQ_S3CUART_ERR3	IRQ_S3C2443_ERR3
 
+#ifdef CONFIG_CPU_S3C2440
+#define IRQ_S3C244x_AC97 IRQ_S3C2440_AC97
+#else
+#define IRQ_S3C244x_AC97 IRQ_S3C2443_AC97
+#endif
+
 /* Our FIQs are routable from IRQ_EINT0 to IRQ_ADCPARENT */
 #define FIQ_START		IRQ_EINT0
 
diff --git a/arch/arm/plat-s3c/include/plat/devs.h b/arch/arm/plat-s3c/include/plat/devs.h
index 2e170827e0b..2e6599411c2 100644
--- a/arch/arm/plat-s3c/include/plat/devs.h
+++ b/arch/arm/plat-s3c/include/plat/devs.h
@@ -56,5 +56,6 @@ extern struct platform_device s3c_device_usb_hsotg;
 #ifdef CONFIG_CPU_S3C2440
 
 extern struct platform_device s3c_device_camif;
+extern struct platform_device s3c_device_ac97;
 
 #endif
diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c
index 4eb378c89a3..4553ad6c7ad 100644
--- a/arch/arm/plat-s3c24xx/devs.c
+++ b/arch/arm/plat-s3c24xx/devs.c
@@ -26,6 +26,8 @@
 #include <asm/mach/irq.h>
 #include <mach/fb.h>
 #include <mach/hardware.h>
+#include <mach/dma.h>
+#include <mach/irqs.h>
 #include <asm/irq.h>
 
 #include <plat/regs-serial.h>
@@ -473,4 +475,52 @@ struct platform_device s3c_device_camif = {
 
 EXPORT_SYMBOL(s3c_device_camif);
 
+/* AC97 */
+
+static struct resource s3c_ac97_resource[] = {
+	[0] = {
+		.start = S3C2440_PA_AC97,
+		.end   = S3C2440_PA_AC97 + S3C2440_SZ_AC97 -1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_S3C244x_AC97,
+		.end   = IRQ_S3C244x_AC97,
+		.flags = IORESOURCE_IRQ,
+	},
+	[2] = {
+		.name  = "PCM out",
+		.start = DMACH_PCM_OUT,
+		.end   = DMACH_PCM_OUT,
+		.flags = IORESOURCE_DMA,
+	},
+	[3] = {
+		.name  = "PCM in",
+		.start = DMACH_PCM_IN,
+		.end   = DMACH_PCM_IN,
+		.flags = IORESOURCE_DMA,
+	},
+	[4] = {
+		.name  = "Mic in",
+		.start = DMACH_MIC_IN,
+		.end   = DMACH_MIC_IN,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static u64 s3c_device_ac97_dmamask = 0xffffffffUL;
+
+struct platform_device s3c_device_ac97 = {
+	.name		  = "s3c-ac97",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(s3c_ac97_resource),
+	.resource	  = s3c_ac97_resource,
+	.dev              = {
+		.dma_mask = &s3c_device_ac97_dmamask,
+		.coherent_dma_mask = 0xffffffffUL
+	}
+};
+
+EXPORT_SYMBOL(s3c_device_ac97);
+
 #endif // CONFIG_CPU_S32440
-- 
cgit v1.2.3


From a2c195fdde20772a90ee98ce3523dcfbda49eee6 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Mon, 3 Aug 2009 17:26:50 +0100
Subject: ARM: S3C24XX: Add SPI bus 1 on GPD8 through GPD10

Add configuration callback for SPI bus 1 on GPD[8..10] and ensure the
correct GPIO configuration register definitions in regs-gpio.h

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2410/include/mach/regs-gpio.h |  4 ++-
 arch/arm/mach-s3c2410/include/mach/spi.h       |  3 ++
 arch/arm/plat-s3c24xx/Kconfig                  |  6 ++++
 arch/arm/plat-s3c24xx/Makefile                 |  1 +
 arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c     | 38 ++++++++++++++++++++++++++
 5 files changed, 51 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c

(limited to 'arch')

diff --git a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
index b278d0c45cc..f6e8eec879c 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
@@ -328,13 +328,15 @@
 
 #define S3C2410_GPD8_VD16	(0x02 << 16)
 #define S3C2400_GPD8_TOUT3	(0x02 << 16)
+#define S3C2440_GPD8_SPIMISO1	(0x03 << 16)
 
 #define S3C2410_GPD9_VD17	(0x02 << 18)
 #define S3C2400_GPD9_TCLK0	(0x02 << 18)
-#define S3C2410_GPD9_MASK       (0x03 << 18)
+#define S3C2440_GPD9_SPIMOSI1	(0x03 << 18)
 
 #define S3C2410_GPD10_VD18	(0x02 << 20)
 #define S3C2400_GPD10_nWAIT	(0x02 << 20)
+#define S3C2440_GPD10_SPICLK1	(0x03 << 20)
 
 #define S3C2410_GPD11_VD19	(0x02 << 22)
 
diff --git a/arch/arm/mach-s3c2410/include/mach/spi.h b/arch/arm/mach-s3c2410/include/mach/spi.h
index 1d300fb112b..193b39d654e 100644
--- a/arch/arm/mach-s3c2410/include/mach/spi.h
+++ b/arch/arm/mach-s3c2410/include/mach/spi.h
@@ -30,4 +30,7 @@ extern void s3c24xx_spi_gpiocfg_bus0_gpe11_12_13(struct s3c2410_spi_info *spi,
 extern void s3c24xx_spi_gpiocfg_bus1_gpg5_6_7(struct s3c2410_spi_info *spi,
 					      int enable);
 
+extern void s3c24xx_spi_gpiocfg_bus1_gpd8_9_10(struct s3c2410_spi_info *spi,
+					       int enable);
+
 #endif /* __ASM_ARCH_SPI_H */
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index 5b0bc914f58..aaae456018b 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -105,6 +105,12 @@ config S3C24XX_SPI_BUS1_GPG5_GPG6_GPG7
 	  SPI GPIO configuration code for BUS 1 when connected to
 	  GPG5, GPG6 and GPG7.
 
+config S3C24XX_SPI_BUS1_GPD8_GPD9_GPD10
+	bool
+	help
+	  SPI GPIO configuration code for BUS 1 when connected to
+	  GPD8, GPD9 and GPD10.
+
 # common code for s3c24xx based machines, such as the SMDKs.
 
 config MACH_SMDK
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index 579a165c282..59416796fb1 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -41,6 +41,7 @@ obj-$(CONFIG_ARCH_S3C2410)	+= setup-i2c.o
 
 obj-$(CONFIG_S3C24XX_SPI_BUS0_GPE11_GPE12_GPE13) += spi-bus0-gpe11_12_13.o
 obj-$(CONFIG_S3C24XX_SPI_BUS1_GPG5_GPG6_GPG7)    += spi-bus1-gpg5_6_7.o
+obj-$(CONFIG_S3C24XX_SPI_BUS1_GPD8_GPD9_GPD10)	 += spi-bus1-gpd8_9_10.o
 
 # machine common support
 
diff --git a/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c b/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c
new file mode 100644
index 00000000000..89fcf5308cf
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c
@@ -0,0 +1,38 @@
+/* linux/arch/arm/plat-s3c24xx/spi-bus0-gpd8_9_10.c
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX SPI - gpio configuration for bus 1 on gpd8,9,10
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+*/
+
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+
+#include <mach/spi.h>
+#include <mach/regs-gpio.h>
+
+void s3c24xx_spi_gpiocfg_bus1_gpd8_9_10(struct s3c2410_spi_info *spi,
+					int enable)
+{
+
+	printk(KERN_INFO "%s(%d)\n", __func__, enable);
+	if (enable) {
+		s3c2410_gpio_cfgpin(S3C2410_GPD(10), S3C2440_GPD10_SPICLK1);
+		s3c2410_gpio_cfgpin(S3C2410_GPD(9), S3C2440_GPD9_SPIMOSI1);
+		s3c2410_gpio_cfgpin(S3C2410_GPD(8), S3C2440_GPD8_SPIMISO1);
+		s3c2410_gpio_pullup(S3C2410_GPD(10), 0);
+		s3c2410_gpio_pullup(S3C2410_GPD(9), 0);
+	} else {
+		s3c2410_gpio_cfgpin(S3C2410_GPD(8), S3C2410_GPIO_INPUT);
+		s3c2410_gpio_cfgpin(S3C2410_GPD(9), S3C2410_GPIO_INPUT);
+		s3c2410_gpio_pullup(S3C2410_GPD(10), 1);
+		s3c2410_gpio_pullup(S3C2410_GPD(9), 1);
+		s3c2410_gpio_pullup(S3C2410_GPD(8), 1);
+	}
+}
-- 
cgit v1.2.3


From 00ae4064b1445524752575dd84df227c0687c99d Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Fri, 14 Aug 2009 15:00:49 +0900
Subject: percpu: rename 4k first chunk allocator to page

Page size isn't always 4k depending on arch and configuration.  Rename
4k first chunk allocator to page.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: David Howells <dhowells@redhat.com>
---
 arch/x86/kernel/setup_percpu.c | 23 ++++++++++++-----------
 1 file changed, 12 insertions(+), 11 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index a26ff61e2fb..1e17711c29d 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -249,21 +249,22 @@ static ssize_t __init setup_pcpu_embed(size_t static_size, bool chosen)
 }
 
 /*
- * 4k allocator
+ * Page allocator
  *
- * Boring fallback 4k allocator.  This allocator puts more pressure on
- * PTE TLBs but other than that behaves nicely on both UMA and NUMA.
+ * Boring fallback 4k page allocator.  This allocator puts more
+ * pressure on PTE TLBs but other than that behaves nicely on both UMA
+ * and NUMA.
  */
-static void __init pcpu4k_populate_pte(unsigned long addr)
+static void __init pcpup_populate_pte(unsigned long addr)
 {
 	populate_extra_pte(addr);
 }
 
-static ssize_t __init setup_pcpu_4k(size_t static_size)
+static ssize_t __init setup_pcpu_page(size_t static_size)
 {
-	return pcpu_4k_first_chunk(static_size, PERCPU_FIRST_CHUNK_RESERVE,
-				   pcpu_fc_alloc, pcpu_fc_free,
-				   pcpu4k_populate_pte);
+	return pcpu_page_first_chunk(static_size, PERCPU_FIRST_CHUNK_RESERVE,
+				     pcpu_fc_alloc, pcpu_fc_free,
+				     pcpup_populate_pte);
 }
 
 /* for explicit first chunk allocator selection */
@@ -307,7 +308,7 @@ void __init setup_per_cpu_areas(void)
 	 */
 	ret = -EINVAL;
 	if (strlen(pcpu_chosen_alloc)) {
-		if (strcmp(pcpu_chosen_alloc, "4k")) {
+		if (strcmp(pcpu_chosen_alloc, "page")) {
 			if (!strcmp(pcpu_chosen_alloc, "lpage"))
 				ret = setup_pcpu_lpage(static_size, true);
 			else if (!strcmp(pcpu_chosen_alloc, "embed"))
@@ -317,7 +318,7 @@ void __init setup_per_cpu_areas(void)
 					   "specified\n", pcpu_chosen_alloc);
 			if (ret < 0)
 				pr_warning("PERCPU: %s allocator failed (%zd), "
-					   "falling back to 4k\n",
+					   "falling back to page size\n",
 					   pcpu_chosen_alloc, ret);
 		}
 	} else {
@@ -326,7 +327,7 @@ void __init setup_per_cpu_areas(void)
 			ret = setup_pcpu_embed(static_size, false);
 	}
 	if (ret < 0)
-		ret = setup_pcpu_4k(static_size);
+		ret = setup_pcpu_page(static_size);
 	if (ret < 0)
 		panic("cannot allocate static percpu area (%zu bytes, err=%zd)",
 		      static_size, ret);
-- 
cgit v1.2.3


From 08fc45806103e59a37418e84719b878f9bb32540 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Fri, 14 Aug 2009 15:00:49 +0900
Subject: percpu: build first chunk allocators selectively

There's no need to build unused first chunk allocators in.  Define
CONFIG_NEED_PER_CPU_*_FIRST_CHUNK and let archs enable them
selectively.

Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/x86/Kconfig | 10 ++++++++++
 1 file changed, 10 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index e06b2eeff9f..f7ac2721551 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -150,6 +150,16 @@ config ARCH_HAS_CACHE_LINE_SIZE
 config HAVE_SETUP_PER_CPU_AREA
 	def_bool y
 
+config NEED_PER_CPU_EMBED_FIRST_CHUNK
+	def_bool y
+
+config NEED_PER_CPU_PAGE_FIRST_CHUNK
+	def_bool y
+
+config NEED_PER_CPU_LPAGE_FIRST_CHUNK
+	def_bool y
+	depends on NEED_MULTIPLE_NODES
+
 config HAVE_CPUMASK_OF_CPU_MAP
 	def_bool X86_64_SMP
 
-- 
cgit v1.2.3


From f58dc01ba2ca9fe3ab2ba4ca43d9c8a735cf62d8 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Fri, 14 Aug 2009 15:00:50 +0900
Subject: percpu: generalize first chunk allocator selection

Now that all first chunk allocators are in mm/percpu.c, it makes sense
to make generalize percpu_alloc kernel parameter.  Define PCPU_FC_*
and set pcpu_chosen_fc using early_param() in mm/percpu.c.  Arch code
can use the set value to determine which first chunk allocator to use.

Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/x86/kernel/setup_percpu.c | 24 ++++++------------------
 1 file changed, 6 insertions(+), 18 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index 1e17711c29d..b961d99e641 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -267,16 +267,6 @@ static ssize_t __init setup_pcpu_page(size_t static_size)
 				     pcpup_populate_pte);
 }
 
-/* for explicit first chunk allocator selection */
-static char pcpu_chosen_alloc[16] __initdata;
-
-static int __init percpu_alloc_setup(char *str)
-{
-	strncpy(pcpu_chosen_alloc, str, sizeof(pcpu_chosen_alloc) - 1);
-	return 0;
-}
-early_param("percpu_alloc", percpu_alloc_setup);
-
 static inline void setup_percpu_segment(int cpu)
 {
 #ifdef CONFIG_X86_32
@@ -307,19 +297,17 @@ void __init setup_per_cpu_areas(void)
 	 * each allocator for details.
 	 */
 	ret = -EINVAL;
-	if (strlen(pcpu_chosen_alloc)) {
-		if (strcmp(pcpu_chosen_alloc, "page")) {
-			if (!strcmp(pcpu_chosen_alloc, "lpage"))
+	if (pcpu_chosen_fc != PCPU_FC_AUTO) {
+		if (pcpu_chosen_fc != PCPU_FC_PAGE) {
+			if (pcpu_chosen_fc == PCPU_FC_LPAGE)
 				ret = setup_pcpu_lpage(static_size, true);
-			else if (!strcmp(pcpu_chosen_alloc, "embed"))
-				ret = setup_pcpu_embed(static_size, true);
 			else
-				pr_warning("PERCPU: unknown allocator %s "
-					   "specified\n", pcpu_chosen_alloc);
+				ret = setup_pcpu_embed(static_size, true);
+
 			if (ret < 0)
 				pr_warning("PERCPU: %s allocator failed (%zd), "
 					   "falling back to page size\n",
-					   pcpu_chosen_alloc, ret);
+					   pcpu_fc_names[pcpu_chosen_fc], ret);
 		}
 	} else {
 		ret = setup_pcpu_lpage(static_size, false);
-- 
cgit v1.2.3


From 9a7737691e90d3cce0e5248f91826c50e5aa3fcf Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Fri, 14 Aug 2009 15:00:50 +0900
Subject: percpu: drop @static_size from first chunk allocators

First chunk allocators assume percpu areas have been linked using one
of PERCPU_*() macros and depend on __per_cpu_load symbol defined by
those macros, so there isn't much point in passing in static area size
explicitly when it can be easily calculated from __per_cpu_start and
__per_cpu_end.  Drop @static_size from all percpu first chunk
allocators and helpers.

Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/x86/kernel/setup_percpu.c | 34 +++++++++++++++-------------------
 1 file changed, 15 insertions(+), 19 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index b961d99e641..8aad486c688 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -157,7 +157,7 @@ static int pcpu_lpage_cpu_distance(unsigned int from, unsigned int to)
 		return REMOTE_DISTANCE;
 }
 
-static ssize_t __init setup_pcpu_lpage(size_t static_size, bool chosen)
+static ssize_t __init setup_pcpu_lpage(bool chosen)
 {
 	size_t reserve = PERCPU_MODULE_RESERVE + PERCPU_DYNAMIC_RESERVE;
 	size_t dyn_size = reserve - PERCPU_FIRST_CHUNK_RESERVE;
@@ -184,8 +184,7 @@ static ssize_t __init setup_pcpu_lpage(size_t static_size, bool chosen)
 		return -ENOMEM;
 	}
 
-	ret = pcpu_lpage_build_unit_map(static_size,
-					PERCPU_FIRST_CHUNK_RESERVE,
+	ret = pcpu_lpage_build_unit_map(PERCPU_FIRST_CHUNK_RESERVE,
 					&dyn_size, &unit_size, PMD_SIZE,
 					unit_map, pcpu_lpage_cpu_distance);
 	if (ret < 0) {
@@ -208,9 +207,8 @@ static ssize_t __init setup_pcpu_lpage(size_t static_size, bool chosen)
 		}
 	}
 
-	ret = pcpu_lpage_first_chunk(static_size, PERCPU_FIRST_CHUNK_RESERVE,
-				     dyn_size, unit_size, PMD_SIZE,
-				     unit_map, nr_units,
+	ret = pcpu_lpage_first_chunk(PERCPU_FIRST_CHUNK_RESERVE, dyn_size,
+				     unit_size, PMD_SIZE, unit_map, nr_units,
 				     pcpu_fc_alloc, pcpu_fc_free, pcpul_map);
 out_free:
 	if (ret < 0)
@@ -218,7 +216,7 @@ out_free:
 	return ret;
 }
 #else
-static ssize_t __init setup_pcpu_lpage(size_t static_size, bool chosen)
+static ssize_t __init setup_pcpu_lpage(bool chosen)
 {
 	return -EINVAL;
 }
@@ -232,7 +230,7 @@ static ssize_t __init setup_pcpu_lpage(size_t static_size, bool chosen)
  * mapping so that it can use PMD mapping without additional TLB
  * pressure.
  */
-static ssize_t __init setup_pcpu_embed(size_t static_size, bool chosen)
+static ssize_t __init setup_pcpu_embed(bool chosen)
 {
 	size_t reserve = PERCPU_MODULE_RESERVE + PERCPU_DYNAMIC_RESERVE;
 
@@ -244,7 +242,7 @@ static ssize_t __init setup_pcpu_embed(size_t static_size, bool chosen)
 	if (!chosen && (!cpu_has_pse || pcpu_need_numa()))
 		return -EINVAL;
 
-	return pcpu_embed_first_chunk(static_size, PERCPU_FIRST_CHUNK_RESERVE,
+	return pcpu_embed_first_chunk(PERCPU_FIRST_CHUNK_RESERVE,
 				      reserve - PERCPU_FIRST_CHUNK_RESERVE);
 }
 
@@ -260,9 +258,9 @@ static void __init pcpup_populate_pte(unsigned long addr)
 	populate_extra_pte(addr);
 }
 
-static ssize_t __init setup_pcpu_page(size_t static_size)
+static ssize_t __init setup_pcpu_page(void)
 {
-	return pcpu_page_first_chunk(static_size, PERCPU_FIRST_CHUNK_RESERVE,
+	return pcpu_page_first_chunk(PERCPU_FIRST_CHUNK_RESERVE,
 				     pcpu_fc_alloc, pcpu_fc_free,
 				     pcpup_populate_pte);
 }
@@ -282,7 +280,6 @@ static inline void setup_percpu_segment(int cpu)
 
 void __init setup_per_cpu_areas(void)
 {
-	size_t static_size = __per_cpu_end - __per_cpu_start;
 	unsigned int cpu;
 	unsigned long delta;
 	size_t pcpu_unit_size;
@@ -300,9 +297,9 @@ void __init setup_per_cpu_areas(void)
 	if (pcpu_chosen_fc != PCPU_FC_AUTO) {
 		if (pcpu_chosen_fc != PCPU_FC_PAGE) {
 			if (pcpu_chosen_fc == PCPU_FC_LPAGE)
-				ret = setup_pcpu_lpage(static_size, true);
+				ret = setup_pcpu_lpage(true);
 			else
-				ret = setup_pcpu_embed(static_size, true);
+				ret = setup_pcpu_embed(true);
 
 			if (ret < 0)
 				pr_warning("PERCPU: %s allocator failed (%zd), "
@@ -310,15 +307,14 @@ void __init setup_per_cpu_areas(void)
 					   pcpu_fc_names[pcpu_chosen_fc], ret);
 		}
 	} else {
-		ret = setup_pcpu_lpage(static_size, false);
+		ret = setup_pcpu_lpage(false);
 		if (ret < 0)
-			ret = setup_pcpu_embed(static_size, false);
+			ret = setup_pcpu_embed(false);
 	}
 	if (ret < 0)
-		ret = setup_pcpu_page(static_size);
+		ret = setup_pcpu_page();
 	if (ret < 0)
-		panic("cannot allocate static percpu area (%zu bytes, err=%zd)",
-		      static_size, ret);
+		panic("cannot initialize percpu area (err=%zd)", ret);
 
 	pcpu_unit_size = ret;
 
-- 
cgit v1.2.3


From 3cbc85652767c38b252c8de55f9fd180b29e4c0d Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Fri, 14 Aug 2009 15:00:50 +0900
Subject: percpu: add @align to pcpu_fc_alloc_fn_t

pcpu_fc_alloc_fn_t is about to see more interesting usage, add @align
parameter.

Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/x86/kernel/setup_percpu.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index 8aad486c688..660cde13314 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -126,9 +126,9 @@ static void * __init pcpu_alloc_bootmem(unsigned int cpu, unsigned long size,
 /*
  * Helpers for first chunk memory allocation
  */
-static void * __init pcpu_fc_alloc(unsigned int cpu, size_t size)
+static void * __init pcpu_fc_alloc(unsigned int cpu, size_t size, size_t align)
 {
-	return pcpu_alloc_bootmem(cpu, size, size);
+	return pcpu_alloc_bootmem(cpu, size, align);
 }
 
 static void __init pcpu_fc_free(void *ptr, size_t size)
-- 
cgit v1.2.3


From fd1e8a1fe2b54df6c185b4fa65f181f50b9c4d4e Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Fri, 14 Aug 2009 15:00:51 +0900
Subject: percpu: introduce pcpu_alloc_info and pcpu_group_info

Till now, non-linear cpu->unit map was expressed using an integer
array which maps each cpu to a unit and used only by lpage allocator.
Although how many units have been placed in a single contiguos area
(group) is known while building unit_map, the information is lost when
the result is recorded into the unit_map array.  For lpage allocator,
as all allocations are done by lpages and whether two adjacent lpages
are in the same group or not is irrelevant, this didn't cause any
problem.  Non-linear cpu->unit mapping will be used for sparse
embedding and this grouping information is necessary for that.

This patch introduces pcpu_alloc_info which contains all the
information necessary for initializing percpu allocator.
pcpu_alloc_info contains array of pcpu_group_info which describes how
units are grouped and mapped to cpus.  pcpu_group_info also has
base_offset field to specify its offset from the chunk's base address.
pcpu_build_alloc_info() initializes this field as if all groups are
allocated back-to-back as is currently done but this will be used to
sparsely place groups.

pcpu_alloc_info is a rather complex data structure which contains a
flexible array which in turn points to nested cpu_map arrays.

* pcpu_alloc_alloc_info() and pcpu_free_alloc_info() are provided to
  help dealing with pcpu_alloc_info.

* pcpu_lpage_build_unit_map() is updated to build pcpu_alloc_info,
  generalized and renamed to pcpu_build_alloc_info().
  @cpu_distance_fn may be NULL indicating that all cpus are of
  LOCAL_DISTANCE.

* pcpul_lpage_dump_cfg() is updated to process pcpu_alloc_info,
  generalized and renamed to pcpu_dump_alloc_info().  It now also
  prints which group each alloc unit belongs to.

* pcpu_setup_first_chunk() now takes pcpu_alloc_info instead of the
  separate parameters.  All first chunk allocators are updated to use
  pcpu_build_alloc_info() to build alloc_info and call
  pcpu_setup_first_chunk() with it.  This has the side effect of
  packing units for sparse possible cpus.  ie. if cpus 0, 2 and 4 are
  possible, they'll be assigned unit 0, 1 and 2 instead of 0, 2 and 4.

* x86 setup_pcpu_lpage() is updated to deal with alloc_info.

* sparc64 setup_per_cpu_areas() is updated to build alloc_info.

Although the changes made by this patch are pretty pervasive, it
doesn't cause any behavior difference other than packing of sparse
cpus.  It mostly changes how information is passed among
initialization functions and makes room for more flexibility.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Miller <davem@davemloft.net>
---
 arch/sparc/kernel/smp_64.c     | 24 +++++++++++++++++-------
 arch/x86/kernel/setup_percpu.c | 38 +++++++++++++++-----------------------
 2 files changed, 32 insertions(+), 30 deletions(-)

(limited to 'arch')

diff --git a/arch/sparc/kernel/smp_64.c b/arch/sparc/kernel/smp_64.c
index 9856d866b77..a42a4a744d1 100644
--- a/arch/sparc/kernel/smp_64.c
+++ b/arch/sparc/kernel/smp_64.c
@@ -1475,17 +1475,29 @@ static void __init pcpu_map_range(unsigned long start, unsigned long end,
 
 void __init setup_per_cpu_areas(void)
 {
-	size_t dyn_size, static_size = __per_cpu_end - __per_cpu_start;
 	static struct vm_struct vm;
+	struct pcpu_alloc_info *ai;
 	unsigned long delta, cpu;
 	size_t size_sum, pcpu_unit_size;
 	size_t ptrs_size;
 	void **ptrs;
 
-	size_sum = PFN_ALIGN(static_size + PERCPU_MODULE_RESERVE +
+	ai = pcpu_alloc_alloc_info(1, nr_cpu_ids);
+
+	ai->static_size = __per_cpu_end - __per_cpu_start;
+	ai->reserved_size = PERCPU_MODULE_RESERVE;
+
+	size_sum = PFN_ALIGN(ai->static_size + ai->reserved_size +
 			     PERCPU_DYNAMIC_RESERVE);
-	dyn_size = size_sum - static_size - PERCPU_MODULE_RESERVE;
 
+	ai->dyn_size = size_sum - ai->static_size - ai->reserved_size;
+	ai->unit_size = PCPU_CHUNK_SIZE;
+	ai->atom_size = PCPU_CHUNK_SIZE;
+	ai->alloc_size = PCPU_CHUNK_SIZE;
+	ai->groups[0].nr_units = nr_cpu_ids;
+
+	for_each_possible_cpu(cpu)
+		ai->groups[0].cpu_map[cpu] = cpu;
 
 	ptrs_size = PFN_ALIGN(nr_cpu_ids * sizeof(ptrs[0]));
 	ptrs = alloc_bootmem(ptrs_size);
@@ -1497,7 +1509,7 @@ void __init setup_per_cpu_areas(void)
 		free_bootmem(__pa(ptrs[cpu] + size_sum),
 			     PCPU_CHUNK_SIZE - size_sum);
 
-		memcpy(ptrs[cpu], __per_cpu_load, static_size);
+		memcpy(ptrs[cpu], __per_cpu_load, ai->static_size);
 	}
 
 	/* allocate address and map */
@@ -1514,9 +1526,7 @@ void __init setup_per_cpu_areas(void)
 		pcpu_map_range(start, end, virt_to_page(ptrs[cpu]));
 	}
 
-	pcpu_unit_size = pcpu_setup_first_chunk(static_size,
-						PERCPU_MODULE_RESERVE, dyn_size,
-						PCPU_CHUNK_SIZE, vm.addr, NULL);
+	pcpu_unit_size = pcpu_setup_first_chunk(ai, vm.addr);
 
 	free_bootmem(__pa(ptrs), ptrs_size);
 
diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index 660cde13314..db5f9c49fec 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -161,9 +161,7 @@ static ssize_t __init setup_pcpu_lpage(bool chosen)
 {
 	size_t reserve = PERCPU_MODULE_RESERVE + PERCPU_DYNAMIC_RESERVE;
 	size_t dyn_size = reserve - PERCPU_FIRST_CHUNK_RESERVE;
-	size_t unit_map_size, unit_size;
-	int *unit_map;
-	int nr_units;
+	struct pcpu_alloc_info *ai;
 	ssize_t ret;
 
 	/* on non-NUMA, embedding is better */
@@ -177,26 +175,22 @@ static ssize_t __init setup_pcpu_lpage(bool chosen)
 	}
 
 	/* allocate and build unit_map */
-	unit_map_size = nr_cpu_ids * sizeof(int);
-	unit_map = alloc_bootmem_nopanic(unit_map_size);
-	if (!unit_map) {
-		pr_warning("PERCPU: failed to allocate unit_map\n");
-		return -ENOMEM;
+	ai = pcpu_build_alloc_info(PERCPU_FIRST_CHUNK_RESERVE, dyn_size,
+				   PMD_SIZE, pcpu_lpage_cpu_distance);
+	if (IS_ERR(ai)) {
+		pr_warning("PERCPU: failed to build unit_map (%ld)\n",
+			   PTR_ERR(ai));
+		return PTR_ERR(ai);
 	}
 
-	ret = pcpu_lpage_build_unit_map(PERCPU_FIRST_CHUNK_RESERVE,
-					&dyn_size, &unit_size, PMD_SIZE,
-					unit_map, pcpu_lpage_cpu_distance);
-	if (ret < 0) {
-		pr_warning("PERCPU: failed to build unit_map\n");
-		goto out_free;
-	}
-	nr_units = ret;
-
 	/* do the parameters look okay? */
 	if (!chosen) {
 		size_t vm_size = VMALLOC_END - VMALLOC_START;
-		size_t tot_size = nr_units * unit_size;
+		size_t tot_size = 0;
+		int group;
+
+		for (group = 0; group < ai->nr_groups; group++)
+			tot_size += ai->unit_size * ai->groups[group].nr_units;
 
 		/* don't consume more than 20% of vmalloc area */
 		if (tot_size > vm_size / 5) {
@@ -207,12 +201,10 @@ static ssize_t __init setup_pcpu_lpage(bool chosen)
 		}
 	}
 
-	ret = pcpu_lpage_first_chunk(PERCPU_FIRST_CHUNK_RESERVE, dyn_size,
-				     unit_size, PMD_SIZE, unit_map, nr_units,
-				     pcpu_fc_alloc, pcpu_fc_free, pcpul_map);
+	ret = pcpu_lpage_first_chunk(ai, pcpu_fc_alloc, pcpu_fc_free,
+				     pcpul_map);
 out_free:
-	if (ret < 0)
-		free_bootmem(__pa(unit_map), unit_map_size);
+	pcpu_free_alloc_info(ai);
 	return ret;
 }
 #else
-- 
cgit v1.2.3


From fb435d5233f8b6f9b93c11d6304d8e98fed03234 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Fri, 14 Aug 2009 15:00:51 +0900
Subject: percpu: add pcpu_unit_offsets[]

Currently units are mapped sequentially into address space.  This
patch adds pcpu_unit_offsets[] which allows units to be mapped to
arbitrary offsets from the chunk base address.  This is necessary to
allow sparse embedding which might would need to allocate address
ranges and memory areas which aren't aligned to unit size but
allocation atom size (page or large page size).  This also simplifies
things a bit by removing the need to calculate offset from unit
number.

With this change, there's no need for the arch code to know
pcpu_unit_size.  Update pcpu_setup_first_chunk() and first chunk
allocators to return regular 0 or -errno return code instead of unit
size or -errno.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: David S. Miller <davem@davemloft.net>
---
 arch/sparc/kernel/smp_64.c     | 12 +++++-----
 arch/x86/kernel/setup_percpu.c | 51 +++++++++++++++++++-----------------------
 2 files changed, 30 insertions(+), 33 deletions(-)

(limited to 'arch')

diff --git a/arch/sparc/kernel/smp_64.c b/arch/sparc/kernel/smp_64.c
index a42a4a744d1..b03fd362c62 100644
--- a/arch/sparc/kernel/smp_64.c
+++ b/arch/sparc/kernel/smp_64.c
@@ -1478,9 +1478,10 @@ void __init setup_per_cpu_areas(void)
 	static struct vm_struct vm;
 	struct pcpu_alloc_info *ai;
 	unsigned long delta, cpu;
-	size_t size_sum, pcpu_unit_size;
+	size_t size_sum;
 	size_t ptrs_size;
 	void **ptrs;
+	int rc;
 
 	ai = pcpu_alloc_alloc_info(1, nr_cpu_ids);
 
@@ -1526,14 +1527,15 @@ void __init setup_per_cpu_areas(void)
 		pcpu_map_range(start, end, virt_to_page(ptrs[cpu]));
 	}
 
-	pcpu_unit_size = pcpu_setup_first_chunk(ai, vm.addr);
+	rc = pcpu_setup_first_chunk(ai, vm.addr);
+	if (rc)
+		panic("failed to setup percpu first chunk (%d)", rc);
 
 	free_bootmem(__pa(ptrs), ptrs_size);
 
 	delta = (unsigned long)pcpu_base_addr - (unsigned long)__per_cpu_start;
-	for_each_possible_cpu(cpu) {
-		__per_cpu_offset(cpu) = delta + cpu * pcpu_unit_size;
-	}
+	for_each_possible_cpu(cpu)
+		__per_cpu_offset(cpu) = delta + pcpu_unit_offsets[cpu];
 
 	/* Setup %g5 for the boot cpu.  */
 	__local_per_cpu_offset = __per_cpu_offset(smp_processor_id());
diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index db5f9c49fec..9becc5d4b51 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -157,12 +157,12 @@ static int pcpu_lpage_cpu_distance(unsigned int from, unsigned int to)
 		return REMOTE_DISTANCE;
 }
 
-static ssize_t __init setup_pcpu_lpage(bool chosen)
+static int __init setup_pcpu_lpage(bool chosen)
 {
 	size_t reserve = PERCPU_MODULE_RESERVE + PERCPU_DYNAMIC_RESERVE;
 	size_t dyn_size = reserve - PERCPU_FIRST_CHUNK_RESERVE;
 	struct pcpu_alloc_info *ai;
-	ssize_t ret;
+	int rc;
 
 	/* on non-NUMA, embedding is better */
 	if (!chosen && !pcpu_need_numa())
@@ -196,19 +196,18 @@ static ssize_t __init setup_pcpu_lpage(bool chosen)
 		if (tot_size > vm_size / 5) {
 			pr_info("PERCPU: too large chunk size %zuMB for "
 				"large page remap\n", tot_size >> 20);
-			ret = -EINVAL;
+			rc = -EINVAL;
 			goto out_free;
 		}
 	}
 
-	ret = pcpu_lpage_first_chunk(ai, pcpu_fc_alloc, pcpu_fc_free,
-				     pcpul_map);
+	rc = pcpu_lpage_first_chunk(ai, pcpu_fc_alloc, pcpu_fc_free, pcpul_map);
 out_free:
 	pcpu_free_alloc_info(ai);
-	return ret;
+	return rc;
 }
 #else
-static ssize_t __init setup_pcpu_lpage(bool chosen)
+static int __init setup_pcpu_lpage(bool chosen)
 {
 	return -EINVAL;
 }
@@ -222,7 +221,7 @@ static ssize_t __init setup_pcpu_lpage(bool chosen)
  * mapping so that it can use PMD mapping without additional TLB
  * pressure.
  */
-static ssize_t __init setup_pcpu_embed(bool chosen)
+static int __init setup_pcpu_embed(bool chosen)
 {
 	size_t reserve = PERCPU_MODULE_RESERVE + PERCPU_DYNAMIC_RESERVE;
 
@@ -250,7 +249,7 @@ static void __init pcpup_populate_pte(unsigned long addr)
 	populate_extra_pte(addr);
 }
 
-static ssize_t __init setup_pcpu_page(void)
+static int __init setup_pcpu_page(void)
 {
 	return pcpu_page_first_chunk(PERCPU_FIRST_CHUNK_RESERVE,
 				     pcpu_fc_alloc, pcpu_fc_free,
@@ -274,8 +273,7 @@ void __init setup_per_cpu_areas(void)
 {
 	unsigned int cpu;
 	unsigned long delta;
-	size_t pcpu_unit_size;
-	ssize_t ret;
+	int rc;
 
 	pr_info("NR_CPUS:%d nr_cpumask_bits:%d nr_cpu_ids:%d nr_node_ids:%d\n",
 		NR_CPUS, nr_cpumask_bits, nr_cpu_ids, nr_node_ids);
@@ -285,36 +283,33 @@ void __init setup_per_cpu_areas(void)
 	 * of large page mappings.  Please read comments on top of
 	 * each allocator for details.
 	 */
-	ret = -EINVAL;
+	rc = -EINVAL;
 	if (pcpu_chosen_fc != PCPU_FC_AUTO) {
 		if (pcpu_chosen_fc != PCPU_FC_PAGE) {
 			if (pcpu_chosen_fc == PCPU_FC_LPAGE)
-				ret = setup_pcpu_lpage(true);
+				rc = setup_pcpu_lpage(true);
 			else
-				ret = setup_pcpu_embed(true);
+				rc = setup_pcpu_embed(true);
 
-			if (ret < 0)
-				pr_warning("PERCPU: %s allocator failed (%zd), "
+			if (rc < 0)
+				pr_warning("PERCPU: %s allocator failed (%d), "
 					   "falling back to page size\n",
-					   pcpu_fc_names[pcpu_chosen_fc], ret);
+					   pcpu_fc_names[pcpu_chosen_fc], rc);
 		}
 	} else {
-		ret = setup_pcpu_lpage(false);
-		if (ret < 0)
-			ret = setup_pcpu_embed(false);
+		rc = setup_pcpu_lpage(false);
+		if (rc < 0)
+			rc = setup_pcpu_embed(false);
 	}
-	if (ret < 0)
-		ret = setup_pcpu_page();
-	if (ret < 0)
-		panic("cannot initialize percpu area (err=%zd)", ret);
-
-	pcpu_unit_size = ret;
+	if (rc < 0)
+		rc = setup_pcpu_page();
+	if (rc < 0)
+		panic("cannot initialize percpu area (err=%d)", rc);
 
 	/* alrighty, percpu areas up and running */
 	delta = (unsigned long)pcpu_base_addr - (unsigned long)__per_cpu_start;
 	for_each_possible_cpu(cpu) {
-		per_cpu_offset(cpu) =
-			delta + pcpu_unit_map[cpu] * pcpu_unit_size;
+		per_cpu_offset(cpu) = delta + pcpu_unit_offsets[cpu];
 		per_cpu(this_cpu_off, cpu) = per_cpu_offset(cpu);
 		per_cpu(cpu_number, cpu) = cpu;
 		setup_percpu_segment(cpu);
-- 
cgit v1.2.3


From c8826dd538602d730ed2c18c6753f1bbfa6c4933 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Fri, 14 Aug 2009 15:00:52 +0900
Subject: percpu: update embedding first chunk allocator to handle sparse units

Now that percpu core can handle very sparse units, given that vmalloc
space is large enough, embedding first chunk allocator can use any
memory to build the first chunk.  This patch teaches
pcpu_embed_first_chunk() about distances between cpus and to use
alloc/free callbacks to allocate node specific areas for each group
and use them for the first chunk.

This brings the benefits of embedding allocator to NUMA configurations
- no extra TLB pressure with the flexibility of unified dynamic
allocator and no need to restructure arch code to build memory layout
suitable for percpu.  With units put into atom_size aligned groups
according to cpu distances, using large page for dynamic chunks is
also easily possible with falling back to reuglar pages if large
allocation fails.

Embedding allocator users are converted to specify NULL
cpu_distance_fn, so this patch doesn't cause any visible behavior
difference.  Following patches will convert them.

Signed-off-by: Tejun Heo <tj@kernel.org>
---
 arch/x86/kernel/setup_percpu.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index 9becc5d4b51..67f6314de9f 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -234,7 +234,9 @@ static int __init setup_pcpu_embed(bool chosen)
 		return -EINVAL;
 
 	return pcpu_embed_first_chunk(PERCPU_FIRST_CHUNK_RESERVE,
-				      reserve - PERCPU_FIRST_CHUNK_RESERVE);
+				      reserve - PERCPU_FIRST_CHUNK_RESERVE,
+				      PAGE_SIZE, NULL, pcpu_fc_alloc,
+				      pcpu_fc_free);
 }
 
 /*
-- 
cgit v1.2.3


From 4518e6a0c038b98be4c480e6f4481e8676bd15dd Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Fri, 14 Aug 2009 15:00:52 +0900
Subject: x86,percpu: use embedding for 64bit NUMA and page for 32bit NUMA

Embedding percpu first chunk allocator can now handle very sparse unit
mapping.  Use embedding allocator instead of lpage for 64bit NUMA.
This removes extra TLB pressure and the need to do complex and fragile
dancing when changing page attributes.

For 32bit, using very sparse unit mapping isn't a good idea because
the vmalloc space is very constrained.  32bit NUMA machines aren't
exactly the focus of optimization and it isn't very clear whether
lpage performs better than page.  Use page first chunk allocator for
32bit NUMAs.

As this leaves setup_pcpu_*() functions pretty much empty, fold them
into setup_per_cpu_areas().

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Andi Kleen <andi@firstfloor.org>
---
 arch/x86/Kconfig               |   4 --
 arch/x86/kernel/setup_percpu.c | 155 ++++++++---------------------------------
 2 files changed, 28 insertions(+), 131 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index f7ac2721551..869d7d30144 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -156,10 +156,6 @@ config NEED_PER_CPU_EMBED_FIRST_CHUNK
 config NEED_PER_CPU_PAGE_FIRST_CHUNK
 	def_bool y
 
-config NEED_PER_CPU_LPAGE_FIRST_CHUNK
-	def_bool y
-	depends on NEED_MULTIPLE_NODES
-
 config HAVE_CPUMASK_OF_CPU_MAP
 	def_bool X86_64_SMP
 
diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index 67f6314de9f..d559af913e1 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -55,6 +55,7 @@ EXPORT_SYMBOL(__per_cpu_offset);
 #define PERCPU_FIRST_CHUNK_RESERVE	0
 #endif
 
+#ifdef CONFIG_X86_32
 /**
  * pcpu_need_numa - determine percpu allocation needs to consider NUMA
  *
@@ -83,6 +84,7 @@ static bool __init pcpu_need_numa(void)
 #endif
 	return false;
 }
+#endif
 
 /**
  * pcpu_alloc_bootmem - NUMA friendly alloc_bootmem wrapper for percpu
@@ -136,128 +138,23 @@ static void __init pcpu_fc_free(void *ptr, size_t size)
 	free_bootmem(__pa(ptr), size);
 }
 
-/*
- * Large page remapping allocator
- */
-#ifdef CONFIG_NEED_MULTIPLE_NODES
-static void __init pcpul_map(void *ptr, size_t size, void *addr)
-{
-	pmd_t *pmd, pmd_v;
-
-	pmd = populate_extra_pmd((unsigned long)addr);
-	pmd_v = pfn_pmd(page_to_pfn(virt_to_page(ptr)), PAGE_KERNEL_LARGE);
-	set_pmd(pmd, pmd_v);
-}
-
-static int pcpu_lpage_cpu_distance(unsigned int from, unsigned int to)
+static int __init pcpu_cpu_distance(unsigned int from, unsigned int to)
 {
+#ifdef CONFIG_NEED_MULTIPLE_NODES
 	if (early_cpu_to_node(from) == early_cpu_to_node(to))
 		return LOCAL_DISTANCE;
 	else
 		return REMOTE_DISTANCE;
-}
-
-static int __init setup_pcpu_lpage(bool chosen)
-{
-	size_t reserve = PERCPU_MODULE_RESERVE + PERCPU_DYNAMIC_RESERVE;
-	size_t dyn_size = reserve - PERCPU_FIRST_CHUNK_RESERVE;
-	struct pcpu_alloc_info *ai;
-	int rc;
-
-	/* on non-NUMA, embedding is better */
-	if (!chosen && !pcpu_need_numa())
-		return -EINVAL;
-
-	/* need PSE */
-	if (!cpu_has_pse) {
-		pr_warning("PERCPU: lpage allocator requires PSE\n");
-		return -EINVAL;
-	}
-
-	/* allocate and build unit_map */
-	ai = pcpu_build_alloc_info(PERCPU_FIRST_CHUNK_RESERVE, dyn_size,
-				   PMD_SIZE, pcpu_lpage_cpu_distance);
-	if (IS_ERR(ai)) {
-		pr_warning("PERCPU: failed to build unit_map (%ld)\n",
-			   PTR_ERR(ai));
-		return PTR_ERR(ai);
-	}
-
-	/* do the parameters look okay? */
-	if (!chosen) {
-		size_t vm_size = VMALLOC_END - VMALLOC_START;
-		size_t tot_size = 0;
-		int group;
-
-		for (group = 0; group < ai->nr_groups; group++)
-			tot_size += ai->unit_size * ai->groups[group].nr_units;
-
-		/* don't consume more than 20% of vmalloc area */
-		if (tot_size > vm_size / 5) {
-			pr_info("PERCPU: too large chunk size %zuMB for "
-				"large page remap\n", tot_size >> 20);
-			rc = -EINVAL;
-			goto out_free;
-		}
-	}
-
-	rc = pcpu_lpage_first_chunk(ai, pcpu_fc_alloc, pcpu_fc_free, pcpul_map);
-out_free:
-	pcpu_free_alloc_info(ai);
-	return rc;
-}
 #else
-static int __init setup_pcpu_lpage(bool chosen)
-{
-	return -EINVAL;
-}
+	return LOCAL_DISTANCE;
 #endif
-
-/*
- * Embedding allocator
- *
- * The first chunk is sized to just contain the static area plus
- * module and dynamic reserves and embedded into linear physical
- * mapping so that it can use PMD mapping without additional TLB
- * pressure.
- */
-static int __init setup_pcpu_embed(bool chosen)
-{
-	size_t reserve = PERCPU_MODULE_RESERVE + PERCPU_DYNAMIC_RESERVE;
-
-	/*
-	 * If large page isn't supported, there's no benefit in doing
-	 * this.  Also, embedding allocation doesn't play well with
-	 * NUMA.
-	 */
-	if (!chosen && (!cpu_has_pse || pcpu_need_numa()))
-		return -EINVAL;
-
-	return pcpu_embed_first_chunk(PERCPU_FIRST_CHUNK_RESERVE,
-				      reserve - PERCPU_FIRST_CHUNK_RESERVE,
-				      PAGE_SIZE, NULL, pcpu_fc_alloc,
-				      pcpu_fc_free);
 }
 
-/*
- * Page allocator
- *
- * Boring fallback 4k page allocator.  This allocator puts more
- * pressure on PTE TLBs but other than that behaves nicely on both UMA
- * and NUMA.
- */
 static void __init pcpup_populate_pte(unsigned long addr)
 {
 	populate_extra_pte(addr);
 }
 
-static int __init setup_pcpu_page(void)
-{
-	return pcpu_page_first_chunk(PERCPU_FIRST_CHUNK_RESERVE,
-				     pcpu_fc_alloc, pcpu_fc_free,
-				     pcpup_populate_pte);
-}
-
 static inline void setup_percpu_segment(int cpu)
 {
 #ifdef CONFIG_X86_32
@@ -281,30 +178,34 @@ void __init setup_per_cpu_areas(void)
 		NR_CPUS, nr_cpumask_bits, nr_cpu_ids, nr_node_ids);
 
 	/*
-	 * Allocate percpu area.  If PSE is supported, try to make use
-	 * of large page mappings.  Please read comments on top of
-	 * each allocator for details.
+	 * Allocate percpu area.  Embedding allocator is our favorite;
+	 * however, on NUMA configurations, it can result in very
+	 * sparse unit mapping and vmalloc area isn't spacious enough
+	 * on 32bit.  Use page in that case.
 	 */
+#ifdef CONFIG_X86_32
+	if (pcpu_chosen_fc == PCPU_FC_AUTO && pcpu_need_numa())
+		pcpu_chosen_fc = PCPU_FC_PAGE;
+#endif
 	rc = -EINVAL;
-	if (pcpu_chosen_fc != PCPU_FC_AUTO) {
-		if (pcpu_chosen_fc != PCPU_FC_PAGE) {
-			if (pcpu_chosen_fc == PCPU_FC_LPAGE)
-				rc = setup_pcpu_lpage(true);
-			else
-				rc = setup_pcpu_embed(true);
-
-			if (rc < 0)
-				pr_warning("PERCPU: %s allocator failed (%d), "
-					   "falling back to page size\n",
-					   pcpu_fc_names[pcpu_chosen_fc], rc);
-		}
-	} else {
-		rc = setup_pcpu_lpage(false);
+	if (pcpu_chosen_fc != PCPU_FC_PAGE) {
+		const size_t atom_size = cpu_has_pse ? PMD_SIZE : PAGE_SIZE;
+		const size_t dyn_size = PERCPU_MODULE_RESERVE +
+			PERCPU_DYNAMIC_RESERVE - PERCPU_FIRST_CHUNK_RESERVE;
+
+		rc = pcpu_embed_first_chunk(PERCPU_FIRST_CHUNK_RESERVE,
+					    dyn_size, atom_size,
+					    pcpu_cpu_distance,
+					    pcpu_fc_alloc, pcpu_fc_free);
 		if (rc < 0)
-			rc = setup_pcpu_embed(false);
+			pr_warning("PERCPU: %s allocator failed (%d), "
+				   "falling back to page size\n",
+				   pcpu_fc_names[pcpu_chosen_fc], rc);
 	}
 	if (rc < 0)
-		rc = setup_pcpu_page();
+		rc = pcpu_page_first_chunk(PERCPU_FIRST_CHUNK_RESERVE,
+					   pcpu_fc_alloc, pcpu_fc_free,
+					   pcpup_populate_pte);
 	if (rc < 0)
 		panic("cannot initialize percpu area (err=%d)", rc);
 
-- 
cgit v1.2.3


From e933a73f48e3b2d40cfa56d81e2646f194b5a66a Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Fri, 14 Aug 2009 15:00:53 +0900
Subject: percpu: kill lpage first chunk allocator

With x86 converted to embedding allocator, lpage doesn't have any user
left.  Kill it along with cpa handling code.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jan Beulich <JBeulich@novell.com>
---
 arch/x86/mm/pageattr.c | 20 +-------------------
 1 file changed, 1 insertion(+), 19 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index dce282f6570..f53cfc7f963 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -687,7 +687,7 @@ static int cpa_process_alias(struct cpa_data *cpa)
 {
 	struct cpa_data alias_cpa;
 	unsigned long laddr = (unsigned long)__va(cpa->pfn << PAGE_SHIFT);
-	unsigned long vaddr, remapped;
+	unsigned long vaddr;
 	int ret;
 
 	if (cpa->pfn >= max_pfn_mapped)
@@ -745,24 +745,6 @@ static int cpa_process_alias(struct cpa_data *cpa)
 	}
 #endif
 
-	/*
-	 * If the PMD page was partially used for per-cpu remapping,
-	 * the recycled area needs to be split and modified.  Because
-	 * the area is always proper subset of a PMD page
-	 * cpa->numpages is guaranteed to be 1 for these areas, so
-	 * there's no need to loop over and check for further remaps.
-	 */
-	remapped = (unsigned long)pcpu_lpage_remapped((void *)laddr);
-	if (remapped) {
-		WARN_ON(cpa->numpages > 1);
-		alias_cpa = *cpa;
-		alias_cpa.vaddr = &remapped;
-		alias_cpa.flags &= ~(CPA_PAGES_ARRAY | CPA_ARRAY);
-		ret = __change_page_attr_set_clr(&alias_cpa, 0);
-		if (ret)
-			return ret;
-	}
-
 	return 0;
 }
 
-- 
cgit v1.2.3


From bcb2107fdbecef3de55d597d23453747af81ba88 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Fri, 14 Aug 2009 15:00:53 +0900
Subject: sparc64: use embedding percpu first chunk allocator

sparc64 currently allocates a large page for each cpu and partially
remap them into vmalloc area much like what lpage first chunk
allocator did.  As a 4M page is used for each cpu, this results in
very large unit size and also adds TLB pressure due to the double
mapping of pages in the first chunk.

This patch converts sparc64 to use the embedding percpu first chunk
allocator which now knows how to handle NUMA configurations.  This
simplifies the code a lot, doesn't incur any extra TLB pressure and
results in better utilization of address space.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/Kconfig         |   3 ++
 arch/sparc/kernel/smp_64.c | 128 +++++++--------------------------------------
 2 files changed, 21 insertions(+), 110 deletions(-)

(limited to 'arch')

diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 4f6ed0f113f..fbd1233b392 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -95,6 +95,9 @@ config AUDIT_ARCH
 config HAVE_SETUP_PER_CPU_AREA
 	def_bool y if SPARC64
 
+config NEED_PER_CPU_EMBED_FIRST_CHUNK
+	def_bool y if SPARC64
+
 config GENERIC_HARDIRQS_NO__DO_IRQ
 	bool
 	def_bool y if SPARC64
diff --git a/arch/sparc/kernel/smp_64.c b/arch/sparc/kernel/smp_64.c
index b03fd362c62..ff68373ce6d 100644
--- a/arch/sparc/kernel/smp_64.c
+++ b/arch/sparc/kernel/smp_64.c
@@ -1389,8 +1389,8 @@ void smp_send_stop(void)
  * RETURNS:
  * Pointer to the allocated area on success, NULL on failure.
  */
-static void * __init pcpu_alloc_bootmem(unsigned int cpu, unsigned long size,
-					unsigned long align)
+static void * __init pcpu_alloc_bootmem(unsigned int cpu, size_t size,
+					size_t align)
 {
 	const unsigned long goal = __pa(MAX_DMA_ADDRESS);
 #ifdef CONFIG_NEED_MULTIPLE_NODES
@@ -1415,123 +1415,31 @@ static void * __init pcpu_alloc_bootmem(unsigned int cpu, unsigned long size,
 #endif
 }
 
-#define PCPU_CHUNK_SIZE (4UL * 1024UL * 1024UL)
-
-static void __init pcpu_map_range(unsigned long start, unsigned long end,
-				  struct page *page)
+static void __init pcpu_free_bootmem(void *ptr, size_t size)
 {
-	unsigned long pfn = page_to_pfn(page);
-	unsigned long pte_base;
-
-	BUG_ON((pfn<<PAGE_SHIFT)&(PCPU_CHUNK_SIZE - 1UL));
-
-	pte_base = (_PAGE_VALID | _PAGE_SZ4MB_4U |
-		    _PAGE_CP_4U | _PAGE_CV_4U |
-		    _PAGE_P_4U | _PAGE_W_4U);
-	if (tlb_type == hypervisor)
-		pte_base = (_PAGE_VALID | _PAGE_SZ4MB_4V |
-			    _PAGE_CP_4V | _PAGE_CV_4V |
-			    _PAGE_P_4V | _PAGE_W_4V);
-
-	while (start < end) {
-		pgd_t *pgd = pgd_offset_k(start);
-		unsigned long this_end;
-		pud_t *pud;
-		pmd_t *pmd;
-		pte_t *pte;
-
-		pud = pud_offset(pgd, start);
-		if (pud_none(*pud)) {
-			pmd_t *new;
-
-			new = __alloc_bootmem(PAGE_SIZE, PAGE_SIZE, PAGE_SIZE);
-			pud_populate(&init_mm, pud, new);
-		}
-
-		pmd = pmd_offset(pud, start);
-		if (!pmd_present(*pmd)) {
-			pte_t *new;
-
-			new = __alloc_bootmem(PAGE_SIZE, PAGE_SIZE, PAGE_SIZE);
-			pmd_populate_kernel(&init_mm, pmd, new);
-		}
-
-		pte = pte_offset_kernel(pmd, start);
-		this_end = (start + PMD_SIZE) & PMD_MASK;
-		if (this_end > end)
-			this_end = end;
-
-		while (start < this_end) {
-			unsigned long paddr = pfn << PAGE_SHIFT;
-
-			pte_val(*pte) = (paddr | pte_base);
+	free_bootmem(__pa(ptr), size);
+}
 
-			start += PAGE_SIZE;
-			pte++;
-			pfn++;
-		}
-	}
+static int pcpu_cpu_distance(unsigned int from, unsigned int to)
+{
+	if (cpu_to_node(from) == cpu_to_node(to))
+		return LOCAL_DISTANCE;
+	else
+		return REMOTE_DISTANCE;
 }
 
 void __init setup_per_cpu_areas(void)
 {
-	static struct vm_struct vm;
-	struct pcpu_alloc_info *ai;
-	unsigned long delta, cpu;
-	size_t size_sum;
-	size_t ptrs_size;
-	void **ptrs;
+	unsigned long delta;
+	unsigned int cpu;
 	int rc;
 
-	ai = pcpu_alloc_alloc_info(1, nr_cpu_ids);
-
-	ai->static_size = __per_cpu_end - __per_cpu_start;
-	ai->reserved_size = PERCPU_MODULE_RESERVE;
-
-	size_sum = PFN_ALIGN(ai->static_size + ai->reserved_size +
-			     PERCPU_DYNAMIC_RESERVE);
-
-	ai->dyn_size = size_sum - ai->static_size - ai->reserved_size;
-	ai->unit_size = PCPU_CHUNK_SIZE;
-	ai->atom_size = PCPU_CHUNK_SIZE;
-	ai->alloc_size = PCPU_CHUNK_SIZE;
-	ai->groups[0].nr_units = nr_cpu_ids;
-
-	for_each_possible_cpu(cpu)
-		ai->groups[0].cpu_map[cpu] = cpu;
-
-	ptrs_size = PFN_ALIGN(nr_cpu_ids * sizeof(ptrs[0]));
-	ptrs = alloc_bootmem(ptrs_size);
-
-	for_each_possible_cpu(cpu) {
-		ptrs[cpu] = pcpu_alloc_bootmem(cpu, PCPU_CHUNK_SIZE,
-					       PCPU_CHUNK_SIZE);
-
-		free_bootmem(__pa(ptrs[cpu] + size_sum),
-			     PCPU_CHUNK_SIZE - size_sum);
-
-		memcpy(ptrs[cpu], __per_cpu_load, ai->static_size);
-	}
-
-	/* allocate address and map */
-	vm.flags = VM_ALLOC;
-	vm.size = nr_cpu_ids * PCPU_CHUNK_SIZE;
-	vm_area_register_early(&vm, PCPU_CHUNK_SIZE);
-
-	for_each_possible_cpu(cpu) {
-		unsigned long start = (unsigned long) vm.addr;
-		unsigned long end;
-
-		start += cpu * PCPU_CHUNK_SIZE;
-		end = start + PCPU_CHUNK_SIZE;
-		pcpu_map_range(start, end, virt_to_page(ptrs[cpu]));
-	}
-
-	rc = pcpu_setup_first_chunk(ai, vm.addr);
+	rc = pcpu_embed_first_chunk(PERCPU_MODULE_RESERVE,
+				    PERCPU_DYNAMIC_RESERVE, 4 << 20,
+				    pcpu_cpu_distance, pcpu_alloc_bootmem,
+				    pcpu_free_bootmem);
 	if (rc)
-		panic("failed to setup percpu first chunk (%d)", rc);
-
-	free_bootmem(__pa(ptrs), ptrs_size);
+		panic("failed to initialize first chunk (%d)", rc);
 
 	delta = (unsigned long)pcpu_base_addr - (unsigned long)__per_cpu_start;
 	for_each_possible_cpu(cpu)
-- 
cgit v1.2.3


From c2a7e818019f20a5cf7fb26a6eb59e212e6c0cd8 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Fri, 14 Aug 2009 15:00:53 +0900
Subject: powerpc64: convert to dynamic percpu allocator

Now that percpu allows arbitrary embedding of the first chunk,
powerpc64 can easily be converted to dynamic percpu allocator.
Convert it.  powerpc supports several large page sizes.  Cap atom_size
at 1M.  There isn't much to gain by going above that anyway.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/Kconfig           |  4 +--
 arch/powerpc/kernel/setup_64.c | 61 +++++++++++++++++++++++++++++++-----------
 2 files changed, 47 insertions(+), 18 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 61bbffa2fe6..2c42e1526d0 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -46,10 +46,10 @@ config GENERIC_HARDIRQS_NO__DO_IRQ
 	bool
 	default y
 
-config HAVE_LEGACY_PER_CPU_AREA
+config HAVE_SETUP_PER_CPU_AREA
 	def_bool PPC64
 
-config HAVE_SETUP_PER_CPU_AREA
+config NEED_PER_CPU_EMBED_FIRST_CHUNK
 	def_bool PPC64
 
 config IRQ_PER_CPU
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 1f6816003eb..aa6e4500635 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -57,6 +57,7 @@
 #include <asm/cache.h>
 #include <asm/page.h>
 #include <asm/mmu.h>
+#include <asm/mmu-hash64.h>
 #include <asm/firmware.h>
 #include <asm/xmon.h>
 #include <asm/udbg.h>
@@ -569,25 +570,53 @@ void cpu_die(void)
 }
 
 #ifdef CONFIG_SMP
-void __init setup_per_cpu_areas(void)
+#define PCPU_DYN_SIZE		()
+
+static void * __init pcpu_fc_alloc(unsigned int cpu, size_t size, size_t align)
 {
-	int i;
-	unsigned long size;
-	char *ptr;
-
-	/* Copy section for each CPU (we discard the original) */
-	size = ALIGN(__per_cpu_end - __per_cpu_start, PAGE_SIZE);
-#ifdef CONFIG_MODULES
-	if (size < PERCPU_ENOUGH_ROOM)
-		size = PERCPU_ENOUGH_ROOM;
-#endif
+	return __alloc_bootmem_node(NODE_DATA(cpu_to_node(cpu)), size, align,
+				    __pa(MAX_DMA_ADDRESS));
+}
 
-	for_each_possible_cpu(i) {
-		ptr = alloc_bootmem_pages_node(NODE_DATA(cpu_to_node(i)), size);
+static void __init pcpu_fc_free(void *ptr, size_t size)
+{
+	free_bootmem(__pa(ptr), size);
+}
 
-		paca[i].data_offset = ptr - __per_cpu_start;
-		memcpy(ptr, __per_cpu_start, __per_cpu_end - __per_cpu_start);
-	}
+static int pcpu_cpu_distance(unsigned int from, unsigned int to)
+{
+	if (cpu_to_node(from) == cpu_to_node(to))
+		return LOCAL_DISTANCE;
+	else
+		return REMOTE_DISTANCE;
+}
+
+void __init setup_per_cpu_areas(void)
+{
+	const size_t dyn_size = PERCPU_MODULE_RESERVE + PERCPU_DYNAMIC_RESERVE;
+	size_t atom_size;
+	unsigned long delta;
+	unsigned int cpu;
+	int rc;
+
+	/*
+	 * Linear mapping is one of 4K, 1M and 16M.  For 4K, no need
+	 * to group units.  For larger mappings, use 1M atom which
+	 * should be large enough to contain a number of units.
+	 */
+	if (mmu_linear_psize == MMU_PAGE_4K)
+		atom_size = PAGE_SIZE;
+	else
+		atom_size = 1 << 20;
+
+	rc = pcpu_embed_first_chunk(0, dyn_size, atom_size, pcpu_cpu_distance,
+				    pcpu_fc_alloc, pcpu_fc_free);
+	if (rc < 0)
+		panic("cannot initialize percpu area (err=%d)", rc);
+
+	delta = (unsigned long)pcpu_base_addr - (unsigned long)__per_cpu_start;
+	for_each_possible_cpu(cpu)
+		paca[cpu].data_offset = delta + pcpu_unit_offsets[cpu];
 }
 #endif
 
-- 
cgit v1.2.3


From cf87a6e2fe95891575c45ba1a0ecb8cf53c09732 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Mon, 20 Jul 2009 08:18:47 +0200
Subject: ARM: mxc: Fix i2c_board_info definitions

Fix i2c_board_info definitions - we were defining the 'type' field
of these structures twice since the first argument of I2C_BOARD_INFO
sets this field.  Move the second definition into I2C_BOARD_INFO().

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Jean Delvare <khali@linux-fr.org>
---
 arch/arm/mach-mx1/mx1ads.c          |  6 ++----
 arch/arm/mach-mx2/eukrea_cpuimx27.c |  3 +--
 arch/arm/mach-mx2/pcm038.c          | 12 ++++--------
 arch/arm/mach-mx3/pcm037.c          |  3 +--
 arch/arm/mach-mx3/pcm043.c          |  3 +--
 5 files changed, 9 insertions(+), 18 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-mx1/mx1ads.c b/arch/arm/mach-mx1/mx1ads.c
index 6af064d19b0..30f04e56faf 100644
--- a/arch/arm/mach-mx1/mx1ads.c
+++ b/arch/arm/mach-mx1/mx1ads.c
@@ -104,12 +104,10 @@ static struct imxi2c_platform_data mx1ads_i2c_data = {
 
 static struct i2c_board_info mx1ads_i2c_devices[] = {
 	{
-		I2C_BOARD_INFO("pcf857x", 0x22),
-		.type = "pcf8575",
+		I2C_BOARD_INFO("pcf8575", 0x22),
 		.platform_data = &pcf857x_data[0],
 	}, {
-		I2C_BOARD_INFO("pcf857x", 0x24),
-		.type = "pcf8575",
+		I2C_BOARD_INFO("pcf8575", 0x24),
 		.platform_data = &pcf857x_data[1],
 	},
 };
diff --git a/arch/arm/mach-mx2/eukrea_cpuimx27.c b/arch/arm/mach-mx2/eukrea_cpuimx27.c
index a2c4181892c..7b187606682 100644
--- a/arch/arm/mach-mx2/eukrea_cpuimx27.c
+++ b/arch/arm/mach-mx2/eukrea_cpuimx27.c
@@ -135,8 +135,7 @@ static struct imxi2c_platform_data eukrea_cpuimx27_i2c_1_data = {
 
 static struct i2c_board_info eukrea_cpuimx27_i2c_devices[] = {
 	{
-		I2C_BOARD_INFO("rtc-pcf8563", 0x51),
-		.type = "pcf8563"
+		I2C_BOARD_INFO("pcf8563", 0x51),
 	},
 };
 
diff --git a/arch/arm/mach-mx2/pcm038.c b/arch/arm/mach-mx2/pcm038.c
index 638d078304c..9a3483c8f58 100644
--- a/arch/arm/mach-mx2/pcm038.c
+++ b/arch/arm/mach-mx2/pcm038.c
@@ -186,17 +186,13 @@ static struct at24_platform_data board_eeprom = {
 };
 
 static struct i2c_board_info pcm038_i2c_devices[] = {
-	[0] = {
+	{
 		I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
 		.platform_data = &board_eeprom,
-	},
-	[1] = {
-		I2C_BOARD_INFO("rtc-pcf8563", 0x51),
-		.type = "pcf8563"
-	},
-	[2] = {
+	}, {
+		I2C_BOARD_INFO("pcf8563", 0x51),
+	}, {
 		I2C_BOARD_INFO("lm75", 0x4a),
-		.type = "lm75"
 	}
 };
 
diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c
index 1b9140e2303..b1b3282d15d 100644
--- a/arch/arm/mach-mx3/pcm037.c
+++ b/arch/arm/mach-mx3/pcm037.c
@@ -339,8 +339,7 @@ static struct i2c_board_info pcm037_i2c_devices[] = {
 		I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
 		.platform_data = &board_eeprom,
 	}, {
-		I2C_BOARD_INFO("rtc-pcf8563", 0x51),
-		.type = "pcf8563",
+		I2C_BOARD_INFO("pcf8563", 0x51),
 	}
 };
 
diff --git a/arch/arm/mach-mx3/pcm043.c b/arch/arm/mach-mx3/pcm043.c
index 7c7d3cc07b8..e43276ea3b7 100644
--- a/arch/arm/mach-mx3/pcm043.c
+++ b/arch/arm/mach-mx3/pcm043.c
@@ -133,8 +133,7 @@ static struct i2c_board_info pcm043_i2c_devices[] = {
 		I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
 		.platform_data = &board_eeprom,
 	}, {
-		I2C_BOARD_INFO("rtc-pcf8563", 0x51),
-		.type = "pcf8563",
+		I2C_BOARD_INFO("pcf8563", 0x51),
 	}
 };
 #endif
-- 
cgit v1.2.3


From c372a5cf4cde161c7f59bbe7a9ebcfce9cb2c2f8 Mon Sep 17 00:00:00 2001
From: Daniel Mack <daniel@caiaq.de>
Date: Thu, 25 Jun 2009 12:37:16 +0200
Subject: ARM: MX3: add ckil clock

The CKIL clock source is used by the upcoming RTC driver, so we need
to export it.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/clock.c | 7 +++++++
 1 file changed, 7 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock.c
index 2b29491c22b..4742554e996 100644
--- a/arch/arm/mach-mx3/clock.c
+++ b/arch/arm/mach-mx3/clock.c
@@ -403,6 +403,11 @@ static unsigned long clk_ckih_get_rate(struct clk *clk)
 	return ckih_rate;
 }
 
+static unsigned long clk_ckil_get_rate(struct clk *clk)
+{
+	return CKIL_CLK_FREQ;
+}
+
 static struct clk ckih_clk = {
 	.get_rate = clk_ckih_get_rate,
 };
@@ -509,6 +514,7 @@ DEFINE_CLOCK(usb_clk1,    0, NULL,          0, usb_get_rate, NULL, &usb_pll_clk)
 DEFINE_CLOCK(nfc_clk,     0, NULL,          0, nfc_get_rate, NULL, &ahb_clk);
 DEFINE_CLOCK(scc_clk,     0, NULL,          0, NULL, NULL, &ipg_clk);
 DEFINE_CLOCK(ipg_clk,     0, NULL,          0, ipg_get_rate, NULL, &ahb_clk);
+DEFINE_CLOCK(ckil_clk,    0, NULL,          0, clk_ckil_get_rate, NULL, NULL);
 
 #define _REGISTER_CLOCK(d, n, c) \
 	{ \
@@ -566,6 +572,7 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK(NULL, "iim", iim_clk)
 	_REGISTER_CLOCK(NULL, "mpeg4", mpeg4_clk)
 	_REGISTER_CLOCK(NULL, "mbx", mbx_clk)
+	_REGISTER_CLOCK("mxc_rtc", NULL, ckil_clk)
 };
 
 int __init mx31_clocks_init(unsigned long fref)
-- 
cgit v1.2.3


From 12b8eb865285c95d6e2c02555f066e3f949e090d Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Mon, 25 May 2009 10:50:52 +0200
Subject: MXC: use variable for irq controller base in entry-macro.S

This allows us to determine the irq controller base address
on runtime.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/include/mach/entry-macro.S | 3 ++-
 arch/arm/plat-mxc/irq.c                      | 2 +-
 2 files changed, 3 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-mxc/include/mach/entry-macro.S b/arch/arm/plat-mxc/include/mach/entry-macro.S
index 5f01d60da84..7cf290efe76 100644
--- a/arch/arm/plat-mxc/include/mach/entry-macro.S
+++ b/arch/arm/plat-mxc/include/mach/entry-macro.S
@@ -18,7 +18,8 @@
 	.endm
 
 	.macro  get_irqnr_preamble, base, tmp
-	ldr	\base, =AVIC_IO_ADDRESS(AVIC_BASE_ADDR)
+	ldr	\base, =avic_base
+	ldr	\base, [\base]
 #ifdef CONFIG_MXC_IRQ_PRIOR
 	ldr	r4, [\base, #AVIC_NIMASK]
 #endif
diff --git a/arch/arm/plat-mxc/irq.c b/arch/arm/plat-mxc/irq.c
index 618a8b24ed1..778ddfe57d8 100644
--- a/arch/arm/plat-mxc/irq.c
+++ b/arch/arm/plat-mxc/irq.c
@@ -44,7 +44,7 @@
 #define AVIC_FIPNDH		0x60	/* fast int pending high */
 #define AVIC_FIPNDL		0x64	/* fast int pending low */
 
-static void __iomem *avic_base;
+void __iomem *avic_base;
 
 int imx_irq_set_priority(unsigned char irq, unsigned char prio)
 {
-- 
cgit v1.2.3


From fc2a9f0bc7f6dd4966dc57fb98b8697c83b6d035 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Wed, 27 May 2009 18:09:54 +0200
Subject: MXC: i.MX25 timer support

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/time.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c
index 7e71bb6270e..59e33a3bf7f 100644
--- a/arch/arm/plat-mxc/time.c
+++ b/arch/arm/plat-mxc/time.c
@@ -47,7 +47,7 @@
 #define MX2_TSTAT_CAPT		(1 << 1)
 #define MX2_TSTAT_COMP		(1 << 0)
 
-/* MX31, MX35 */
+/* MX31, MX35, MX25 */
 #define MX3_TCTL_WAITEN		(1 << 3)
 #define MX3_TCTL_CLK_IPG	(1 << 6)
 #define MX3_TCTL_FRR		(1 << 9)
@@ -66,7 +66,7 @@ static inline void gpt_irq_disable(void)
 {
 	unsigned int tmp;
 
-	if (cpu_is_mx3())
+	if (cpu_is_mx3() || cpu_is_mx25())
 		__raw_writel(0, timer_base + MX3_IR);
 	else {
 		tmp = __raw_readl(timer_base + MXC_TCTL);
@@ -76,7 +76,7 @@ static inline void gpt_irq_disable(void)
 
 static inline void gpt_irq_enable(void)
 {
-	if (cpu_is_mx3())
+	if (cpu_is_mx3() || cpu_is_mx25())
 		__raw_writel(1<<0, timer_base + MX3_IR);
 	else {
 		__raw_writel(__raw_readl(timer_base + MXC_TCTL) | MX1_2_TCTL_IRQEN,
@@ -90,7 +90,7 @@ static void gpt_irq_acknowledge(void)
 		__raw_writel(0, timer_base + MX1_2_TSTAT);
 	if (cpu_is_mx2())
 		__raw_writel(MX2_TSTAT_CAPT | MX2_TSTAT_COMP, timer_base + MX1_2_TSTAT);
-	if (cpu_is_mx3())
+	if (cpu_is_mx3() || cpu_is_mx25())
 		__raw_writel(MX3_TSTAT_OF1, timer_base + MX3_TSTAT);
 }
 
@@ -117,7 +117,7 @@ static int __init mxc_clocksource_init(struct clk *timer_clk)
 {
 	unsigned int c = clk_get_rate(timer_clk);
 
-	if (cpu_is_mx3())
+	if (cpu_is_mx3() || cpu_is_mx25())
 		clocksource_mxc.read = mx3_get_cycles;
 
 	clocksource_mxc.mult = clocksource_hz2mult(c,
@@ -180,7 +180,7 @@ static void mxc_set_mode(enum clock_event_mode mode,
 
 	if (mode != clockevent_mode) {
 		/* Set event time into far-far future */
-		if (cpu_is_mx3())
+		if (cpu_is_mx3() || cpu_is_mx25())
 			__raw_writel(__raw_readl(timer_base + MX3_TCN) - 3,
 					timer_base + MX3_TCMP);
 		else
@@ -233,7 +233,7 @@ static irqreturn_t mxc_timer_interrupt(int irq, void *dev_id)
 	struct clock_event_device *evt = &clockevent_mxc;
 	uint32_t tstat;
 
-	if (cpu_is_mx3())
+	if (cpu_is_mx3() || cpu_is_mx25())
 		tstat = __raw_readl(timer_base + MX3_TSTAT);
 	else
 		tstat = __raw_readl(timer_base + MX1_2_TSTAT);
@@ -264,7 +264,7 @@ static int __init mxc_clockevent_init(struct clk *timer_clk)
 {
 	unsigned int c = clk_get_rate(timer_clk);
 
-	if (cpu_is_mx3())
+	if (cpu_is_mx3() || cpu_is_mx25())
 		clockevent_mxc.set_next_event = mx3_set_next_event;
 
 	clockevent_mxc.mult = div_sc(c, NSEC_PER_SEC,
@@ -296,7 +296,7 @@ void __init mxc_timer_init(struct clk *timer_clk, void __iomem *base, int irq)
 	__raw_writel(0, timer_base + MXC_TCTL);
 	__raw_writel(0, timer_base + MXC_TPRER); /* see datasheet note */
 
-	if (cpu_is_mx3())
+	if (cpu_is_mx3() || cpu_is_mx25())
 		tctl_val = MX3_TCTL_CLK_IPG | MX3_TCTL_FRR | MX3_TCTL_WAITEN | MXC_TCTL_TEN;
 	else
 		tctl_val = MX1_2_TCTL_FRR | MX1_2_TCTL_CLK_PCLK1 | MXC_TCTL_TEN;
-- 
cgit v1.2.3


From 6134b2cbb0e24f897fd1063745638397809fca29 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Thu, 4 Jun 2009 11:16:22 +0200
Subject: iomux-v3: Allow for a runtime base address

also, check for a valid pad_ctrl_ofs before changing the
pad control register.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/mm.c                    |  2 ++
 arch/arm/plat-mxc/include/mach/iomux-v3.h |  5 +++++
 arch/arm/plat-mxc/iomux-v3.c              | 15 ++++++++++-----
 3 files changed, 17 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c
index c327172159c..ad5a1122d76 100644
--- a/arch/arm/mach-mx3/mm.c
+++ b/arch/arm/mach-mx3/mm.c
@@ -30,6 +30,7 @@
 
 #include <mach/common.h>
 #include <mach/hardware.h>
+#include <mach/iomux-v3.h>
 
 /*!
  * @file mm.c
@@ -83,6 +84,7 @@ void __init mx31_map_io(void)
 void __init mx35_map_io(void)
 {
 	mxc_set_cpu_type(MXC_CPU_MX35);
+	mxc_iomux_v3_init(IO_ADDRESS(IOMUXC_BASE_ADDR));
 	mxc_arch_reset_init(IO_ADDRESS(WDOG_BASE_ADDR));
 
 	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
diff --git a/arch/arm/plat-mxc/include/mach/iomux-v3.h b/arch/arm/plat-mxc/include/mach/iomux-v3.h
index cd06df9370c..a0fa4026546 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-v3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-v3.h
@@ -113,5 +113,10 @@ void mxc_iomux_v3_release_pad(struct pad_desc *pad);
  */
 void mxc_iomux_v3_release_multiple_pads(struct pad_desc *pad_list, int count);
 
+/*
+ * Initialise the iomux controller
+ */
+void mxc_iomux_v3_init(void __iomem *iomux_v3_base);
+
 #endif /* __MACH_IOMUX_V3_H__*/
 
diff --git a/arch/arm/plat-mxc/iomux-v3.c b/arch/arm/plat-mxc/iomux-v3.c
index 77a078f9513..851ca99bf1b 100644
--- a/arch/arm/plat-mxc/iomux-v3.c
+++ b/arch/arm/plat-mxc/iomux-v3.c
@@ -29,7 +29,7 @@
 #include <asm/mach/map.h>
 #include <mach/iomux-v3.h>
 
-#define IOMUX_BASE	IO_ADDRESS(IOMUXC_BASE_ADDR)
+static void __iomem *base;
 
 static unsigned long iomux_v3_pad_alloc_map[0x200 / BITS_PER_LONG];
 
@@ -45,14 +45,14 @@ int mxc_iomux_v3_setup_pad(struct pad_desc *pad)
 	if (test_and_set_bit(pad_ofs >> 2, iomux_v3_pad_alloc_map))
 		return -EBUSY;
 	if (pad->mux_ctrl_ofs)
-		__raw_writel(pad->mux_mode, IOMUX_BASE + pad->mux_ctrl_ofs);
+		__raw_writel(pad->mux_mode, base + pad->mux_ctrl_ofs);
 
 	if (pad->select_input_ofs)
 		__raw_writel(pad->select_input,
-				IOMUX_BASE + pad->select_input_ofs);
+				base + pad->select_input_ofs);
 
-	if (!(pad->pad_ctrl & NO_PAD_CTRL))
-		__raw_writel(pad->pad_ctrl, IOMUX_BASE + pad->pad_ctrl_ofs);
+	if (!(pad->pad_ctrl & NO_PAD_CTRL) && pad->pad_ctrl_ofs)
+		__raw_writel(pad->pad_ctrl, base + pad->pad_ctrl_ofs);
 	return 0;
 }
 EXPORT_SYMBOL(mxc_iomux_v3_setup_pad);
@@ -96,3 +96,8 @@ void mxc_iomux_v3_release_multiple_pads(struct pad_desc *pad_list, int count)
 	}
 }
 EXPORT_SYMBOL(mxc_iomux_v3_release_multiple_pads);
+
+void mxc_iomux_v3_init(void __iomem *iomux_v3_base)
+{
+	base = iomux_v3_base;
+}
-- 
cgit v1.2.3


From a058cbc17901108de9179dccdb29dff0e00c79fe Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Fri, 19 Jun 2009 11:08:07 +0200
Subject: mxc pwm: add mx25 support

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/pwm.c | 17 +++++++++++++----
 1 file changed, 13 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-mxc/pwm.c b/arch/arm/plat-mxc/pwm.c
index 42dd17b89ff..5cdbd605ac0 100644
--- a/arch/arm/plat-mxc/pwm.c
+++ b/arch/arm/plat-mxc/pwm.c
@@ -32,6 +32,7 @@
 #define MX3_PWMPR                 0x10    /* PWM Period Register */
 #define MX3_PWMCR_PRESCALER(x)    (((x - 1) & 0xFFF) << 4)
 #define MX3_PWMCR_CLKSRC_IPG_HIGH (2 << 16)
+#define MX3_PWMCR_CLKSRC_IPG      (1 << 16)
 #define MX3_PWMCR_EN              (1 << 0)
 
 
@@ -55,9 +56,11 @@ int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
 	if (pwm == NULL || period_ns == 0 || duty_ns > period_ns)
 		return -EINVAL;
 
-	if (cpu_is_mx27() || cpu_is_mx3()) {
+	if (cpu_is_mx27() || cpu_is_mx3() || cpu_is_mx25()) {
 		unsigned long long c;
 		unsigned long period_cycles, duty_cycles, prescale;
+		u32 cr;
+
 		c = clk_get_rate(pwm->clk);
 		c = c * period_ns;
 		do_div(c, 1000000000);
@@ -72,9 +75,15 @@ int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
 
 		writel(duty_cycles, pwm->mmio_base + MX3_PWMSAR);
 		writel(period_cycles, pwm->mmio_base + MX3_PWMPR);
-		writel(MX3_PWMCR_PRESCALER(prescale) |
-			MX3_PWMCR_CLKSRC_IPG_HIGH | MX3_PWMCR_EN,
-			pwm->mmio_base + MX3_PWMCR);
+
+		cr = MX3_PWMCR_PRESCALER(prescale) | MX3_PWMCR_EN;
+
+		if (cpu_is_mx25())
+			cr |= MX3_PWMCR_CLKSRC_IPG;
+		else
+			cr |= MX3_PWMCR_CLKSRC_IPG_HIGH;
+
+		writel(cr, pwm->mmio_base + MX3_PWMCR);
 	} else if (cpu_is_mx1() || cpu_is_mx21()) {
 		/* The PWM subsystem allows for exact frequencies. However,
 		 * I cannot connect a scope on my device to the PWM line and
-- 
cgit v1.2.3


From 8c25c36f33157a2e2a1fcd60b6dc00feace80631 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Thu, 4 Jun 2009 11:32:12 +0200
Subject: Add i.MX25 support

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/Makefile                            |   1 +
 arch/arm/mach-mx25/Kconfig                   |   5 +
 arch/arm/mach-mx25/Makefile                  |   2 +
 arch/arm/mach-mx25/Makefile.boot             |   3 +
 arch/arm/mach-mx25/clock.c                   | 219 +++++++++++++++
 arch/arm/mach-mx25/devices.c                 | 402 +++++++++++++++++++++++++++
 arch/arm/mach-mx25/devices.h                 |  19 ++
 arch/arm/mach-mx25/mm.c                      |  76 +++++
 arch/arm/plat-mxc/Kconfig                    |   8 +
 arch/arm/plat-mxc/gpio.c                     |   2 +-
 arch/arm/plat-mxc/include/mach/common.h      |   3 +
 arch/arm/plat-mxc/include/mach/debug-macro.S |   9 +
 arch/arm/plat-mxc/include/mach/hardware.h    |   4 +
 arch/arm/plat-mxc/include/mach/irqs.h        |   2 +
 arch/arm/plat-mxc/include/mach/memory.h      |   2 +
 arch/arm/plat-mxc/include/mach/mx25.h        |  44 +++
 arch/arm/plat-mxc/include/mach/mxc.h         |  13 +
 arch/arm/plat-mxc/include/mach/timex.h       |   2 +
 arch/arm/plat-mxc/include/mach/uncompress.h  |   1 +
 19 files changed, 816 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/mach-mx25/Kconfig
 create mode 100644 arch/arm/mach-mx25/Makefile
 create mode 100644 arch/arm/mach-mx25/Makefile.boot
 create mode 100644 arch/arm/mach-mx25/clock.c
 create mode 100644 arch/arm/mach-mx25/devices.c
 create mode 100644 arch/arm/mach-mx25/devices.h
 create mode 100644 arch/arm/mach-mx25/mm.c
 create mode 100644 arch/arm/plat-mxc/include/mach/mx25.h

(limited to 'arch')

diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index c877d6df23d..95ba3c5ca14 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -135,6 +135,7 @@ machine-$(CONFIG_ARCH_MSM)		:= msm
 machine-$(CONFIG_ARCH_MV78XX0)		:= mv78xx0
 machine-$(CONFIG_ARCH_MX1)		:= mx1
 machine-$(CONFIG_ARCH_MX2)		:= mx2
+machine-$(CONFIG_ARCH_MX25)		:= mx25
 machine-$(CONFIG_ARCH_MX3)		:= mx3
 machine-$(CONFIG_ARCH_NETX)		:= netx
 machine-$(CONFIG_ARCH_NS9XXX)		:= ns9xxx
diff --git a/arch/arm/mach-mx25/Kconfig b/arch/arm/mach-mx25/Kconfig
new file mode 100644
index 00000000000..14c918bad52
--- /dev/null
+++ b/arch/arm/mach-mx25/Kconfig
@@ -0,0 +1,5 @@
+if ARCH_MX25
+
+comment "MX25 platforms:"
+
+endif
diff --git a/arch/arm/mach-mx25/Makefile b/arch/arm/mach-mx25/Makefile
new file mode 100644
index 00000000000..5471086d5e1
--- /dev/null
+++ b/arch/arm/mach-mx25/Makefile
@@ -0,0 +1,2 @@
+obj-y				:= mm.o devices.o
+obj-$(CONFIG_ARCH_MX25)		+= clock.o
diff --git a/arch/arm/mach-mx25/Makefile.boot b/arch/arm/mach-mx25/Makefile.boot
new file mode 100644
index 00000000000..e1dd366f836
--- /dev/null
+++ b/arch/arm/mach-mx25/Makefile.boot
@@ -0,0 +1,3 @@
+   zreladdr-y	:= 0x80008000
+params_phys-y	:= 0x80000100
+initrd_phys-y	:= 0x80800000
diff --git a/arch/arm/mach-mx25/clock.c b/arch/arm/mach-mx25/clock.c
new file mode 100644
index 00000000000..ef26951a527
--- /dev/null
+++ b/arch/arm/mach-mx25/clock.c
@@ -0,0 +1,219 @@
+/*
+ * Copyright (C) 2009 by Sascha Hauer, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <asm/clkdev.h>
+
+#include <mach/clock.h>
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/mx25.h>
+
+#define CRM_BASE	MX25_IO_ADDRESS(MX25_CRM_BASE_ADDR)
+
+#define CCM_MPCTL	0x00
+#define CCM_UPCTL	0x04
+#define CCM_CCTL	0x08
+#define CCM_CGCR0	0x0C
+#define CCM_CGCR1	0x10
+#define CCM_CGCR2	0x14
+#define CCM_PCDR0	0x18
+#define CCM_PCDR1	0x1C
+#define CCM_PCDR2	0x20
+#define CCM_PCDR3	0x24
+#define CCM_RCSR	0x28
+#define CCM_CRDR	0x2C
+#define CCM_DCVR0	0x30
+#define CCM_DCVR1	0x34
+#define CCM_DCVR2	0x38
+#define CCM_DCVR3	0x3c
+#define CCM_LTR0	0x40
+#define CCM_LTR1	0x44
+#define CCM_LTR2	0x48
+#define CCM_LTR3	0x4c
+
+static unsigned long get_rate_mpll(void)
+{
+	ulong mpctl = __raw_readl(CRM_BASE + CCM_MPCTL);
+
+	return mxc_decode_pll(mpctl, 24000000);
+}
+
+static unsigned long get_rate_upll(void)
+{
+	ulong mpctl = __raw_readl(CRM_BASE + CCM_UPCTL);
+
+	return mxc_decode_pll(mpctl, 24000000);
+}
+
+unsigned long get_rate_arm(struct clk *clk)
+{
+	unsigned long cctl = readl(CRM_BASE + CCM_CCTL);
+	unsigned long rate = get_rate_mpll();
+
+	if (cctl & (1 << 14))
+		rate = (rate * 3) >> 1;
+
+	return rate / ((cctl >> 30) + 1);
+}
+
+static unsigned long get_rate_ahb(struct clk *clk)
+{
+	unsigned long cctl = readl(CRM_BASE + CCM_CCTL);
+
+	return get_rate_arm(NULL) / (((cctl >> 28) & 0x3) + 1);
+}
+
+static unsigned long get_rate_ipg(struct clk *clk)
+{
+	return get_rate_ahb(NULL) >> 1;
+}
+
+static unsigned long get_rate_per(int per)
+{
+	unsigned long ofs = (per & 0x3) * 8;
+	unsigned long reg = per & ~0x3;
+	unsigned long val = (readl(CRM_BASE + CCM_PCDR0 + reg) >> ofs) & 0x3f;
+	unsigned long fref;
+
+	if (readl(CRM_BASE + 0x64) & (1 << per))
+		fref = get_rate_upll();
+	else
+		fref = get_rate_ipg(NULL);
+
+	return fref / (val + 1);
+}
+
+static unsigned long get_rate_uart(struct clk *clk)
+{
+	return get_rate_per(15);
+}
+
+static unsigned long get_rate_i2c(struct clk *clk)
+{
+	return get_rate_per(6);
+}
+
+static unsigned long get_rate_nfc(struct clk *clk)
+{
+	return get_rate_per(8);
+}
+
+static unsigned long get_rate_otg(struct clk *clk)
+{
+	return 48000000; /* FIXME */
+}
+
+static int clk_cgcr_enable(struct clk *clk)
+{
+	u32 reg;
+
+	reg = __raw_readl(clk->enable_reg);
+	reg |= 1 << clk->enable_shift;
+	__raw_writel(reg, clk->enable_reg);
+
+	return 0;
+}
+
+static void clk_cgcr_disable(struct clk *clk)
+{
+	u32 reg;
+
+	reg = __raw_readl(clk->enable_reg);
+	reg &= ~(1 << clk->enable_shift);
+	__raw_writel(reg, clk->enable_reg);
+}
+
+#define DEFINE_CLOCK(name, i, er, es, gr, sr)		\
+	static struct clk name = {			\
+		.id		= i,			\
+		.enable_reg	= CRM_BASE + er,	\
+		.enable_shift	= es,			\
+		.get_rate	= gr,			\
+		.set_rate	= sr,			\
+		.enable		= clk_cgcr_enable,	\
+		.disable	= clk_cgcr_disable,	\
+	}
+
+DEFINE_CLOCK(gpt_clk,    0, CCM_CGCR0,  5, get_rate_ipg, NULL);
+DEFINE_CLOCK(cspi1_clk,  0, CCM_CGCR1,  5, get_rate_ipg, NULL);
+DEFINE_CLOCK(cspi2_clk,  0, CCM_CGCR1,  6, get_rate_ipg, NULL);
+DEFINE_CLOCK(cspi3_clk,  0, CCM_CGCR1,  7, get_rate_ipg, NULL);
+DEFINE_CLOCK(uart1_clk,  0, CCM_CGCR2, 14, get_rate_uart, NULL);
+DEFINE_CLOCK(uart2_clk,  0, CCM_CGCR2, 15, get_rate_uart, NULL);
+DEFINE_CLOCK(uart3_clk,  0, CCM_CGCR2, 16, get_rate_uart, NULL);
+DEFINE_CLOCK(uart4_clk,  0, CCM_CGCR2, 17, get_rate_uart, NULL);
+DEFINE_CLOCK(uart5_clk,  0, CCM_CGCR2, 18, get_rate_uart, NULL);
+DEFINE_CLOCK(nfc_clk,    0, CCM_CGCR0,  8, get_rate_nfc, NULL);
+DEFINE_CLOCK(usbotg_clk, 0, CCM_CGCR0, 28, get_rate_otg, NULL);
+DEFINE_CLOCK(pwm1_clk,	 0, CCM_CGCR1, 31, get_rate_ipg, NULL);
+DEFINE_CLOCK(pwm2_clk,	 0, CCM_CGCR2,  0, get_rate_ipg, NULL);
+DEFINE_CLOCK(pwm3_clk,	 0, CCM_CGCR2,  1, get_rate_ipg, NULL);
+DEFINE_CLOCK(pwm4_clk,	 0, CCM_CGCR2,  2, get_rate_ipg, NULL);
+DEFINE_CLOCK(kpp_clk,	 0, CCM_CGCR1, 28, get_rate_ipg, NULL);
+DEFINE_CLOCK(tsc_clk,	 0, CCM_CGCR2, 13, get_rate_ipg, NULL);
+DEFINE_CLOCK(i2c_clk,	 0, CCM_CGCR0,  6, get_rate_i2c, NULL);
+
+#define _REGISTER_CLOCK(d, n, c)	\
+	{				\
+		.dev_id = d,		\
+		.con_id = n,		\
+		.clk = &c,		\
+	},
+
+static struct clk_lookup lookups[] = {
+	_REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk)
+	_REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk)
+	_REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
+	_REGISTER_CLOCK("imx-uart.3", NULL, uart4_clk)
+	_REGISTER_CLOCK("imx-uart.4", NULL, uart5_clk)
+	_REGISTER_CLOCK("mxc-ehci.0", "usb", usbotg_clk)
+	_REGISTER_CLOCK("mxc-ehci.1", "usb", usbotg_clk)
+	_REGISTER_CLOCK("mxc-ehci.2", "usb", usbotg_clk)
+	_REGISTER_CLOCK("fsl-usb2-udc", "usb", usbotg_clk)
+	_REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
+	_REGISTER_CLOCK("spi_imx.0", NULL, cspi1_clk)
+	_REGISTER_CLOCK("spi_imx.1", NULL, cspi2_clk)
+	_REGISTER_CLOCK("spi_imx.2", NULL, cspi3_clk)
+	_REGISTER_CLOCK("mxc_pwm.0", NULL, pwm1_clk)
+	_REGISTER_CLOCK("mxc_pwm.1", NULL, pwm2_clk)
+	_REGISTER_CLOCK("mxc_pwm.2", NULL, pwm3_clk)
+	_REGISTER_CLOCK("mxc_pwm.3", NULL, pwm4_clk)
+	_REGISTER_CLOCK("mxc-keypad", NULL, kpp_clk)
+	_REGISTER_CLOCK("mx25-adc", NULL, tsc_clk)
+	_REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk)
+	_REGISTER_CLOCK("imx-i2c.1", NULL, i2c_clk)
+	_REGISTER_CLOCK("imx-i2c.2", NULL, i2c_clk)
+};
+
+int __init mx25_clocks_init(unsigned long fref)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(lookups); i++)
+		clkdev_add(&lookups[i]);
+
+	mxc_timer_init(&gpt_clk, MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54);
+
+	return 0;
+}
diff --git a/arch/arm/mach-mx25/devices.c b/arch/arm/mach-mx25/devices.c
new file mode 100644
index 00000000000..eb12de1da42
--- /dev/null
+++ b/arch/arm/mach-mx25/devices.c
@@ -0,0 +1,402 @@
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <mach/mx25.h>
+#include <mach/irqs.h>
+
+static struct resource uart0[] = {
+	{
+		.start = 0x43f90000,
+		.end = 0x43f93fff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = 45,
+		.end = 45,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_uart_device0 = {
+	.name = "imx-uart",
+	.id = 0,
+	.resource = uart0,
+	.num_resources = ARRAY_SIZE(uart0),
+};
+
+static struct resource uart1[] = {
+	{
+		.start = 0x43f94000,
+		.end = 0x43f97fff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = 32,
+		.end = 32,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_uart_device1 = {
+	.name = "imx-uart",
+	.id = 1,
+	.resource = uart1,
+	.num_resources = ARRAY_SIZE(uart1),
+};
+
+static struct resource uart2[] = {
+	{
+		.start = 0x5000c000,
+		.end = 0x5000ffff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = 18,
+		.end = 18,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_uart_device2 = {
+	.name = "imx-uart",
+	.id = 2,
+	.resource = uart2,
+	.num_resources = ARRAY_SIZE(uart2),
+};
+
+static struct resource uart3[] = {
+	{
+		.start = 0x50008000,
+		.end = 0x5000bfff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = 5,
+		.end = 5,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_uart_device3 = {
+	.name = "imx-uart",
+	.id = 3,
+	.resource = uart3,
+	.num_resources = ARRAY_SIZE(uart3),
+};
+
+static struct resource uart4[] = {
+	{
+		.start = 0x5002c000,
+		.end = 0x5002ffff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = 40,
+		.end = 40,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_uart_device4 = {
+	.name = "imx-uart",
+	.id = 4,
+	.resource = uart4,
+	.num_resources = ARRAY_SIZE(uart4),
+};
+
+#define MX25_OTG_BASE_ADDR 0x53FF4000
+
+static u64 otg_dmamask = DMA_BIT_MASK(32);
+
+static struct resource mxc_otg_resources[] = {
+	{
+		.start = MX25_OTG_BASE_ADDR,
+		.end = MX25_OTG_BASE_ADDR + 0x1ff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = 37,
+		.end = 37,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_otg = {
+	.name = "mxc-ehci",
+	.id = 0,
+	.dev = {
+		.coherent_dma_mask = 0xffffffff,
+		.dma_mask = &otg_dmamask,
+	},
+	.resource = mxc_otg_resources,
+	.num_resources = ARRAY_SIZE(mxc_otg_resources),
+};
+
+/* OTG gadget device */
+struct platform_device otg_udc_device = {
+	.name = "fsl-usb2-udc",
+	.id   = -1,
+	.dev  = {
+		.dma_mask          = &otg_dmamask,
+		.coherent_dma_mask = 0xffffffff,
+	},
+	.resource = mxc_otg_resources,
+	.num_resources = ARRAY_SIZE(mxc_otg_resources),
+};
+
+static u64 usbh2_dmamask = DMA_BIT_MASK(32);
+
+static struct resource mxc_usbh2_resources[] = {
+	{
+		.start = MX25_OTG_BASE_ADDR + 0x400,
+		.end = MX25_OTG_BASE_ADDR + 0x5ff,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = 35,
+		.end = 35,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_usbh2 = {
+	.name = "mxc-ehci",
+	.id = 1,
+	.dev = {
+		.coherent_dma_mask = 0xffffffff,
+		.dma_mask = &usbh2_dmamask,
+	},
+	.resource = mxc_usbh2_resources,
+	.num_resources = ARRAY_SIZE(mxc_usbh2_resources),
+};
+
+static struct resource mxc_spi_resources0[] = {
+	{
+	       .start = 0x43fa4000,
+	       .end = 0x43fa7fff,
+	       .flags = IORESOURCE_MEM,
+	}, {
+	       .start = 14,
+	       .end = 14,
+	       .flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_spi_device0 = {
+	.name = "spi_imx",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(mxc_spi_resources0),
+	.resource = mxc_spi_resources0,
+};
+
+static struct resource mxc_spi_resources1[] = {
+	{
+	       .start = 0x50010000,
+	       .end = 0x50013fff,
+	       .flags = IORESOURCE_MEM,
+	}, {
+	       .start = 13,
+	       .end = 13,
+	       .flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_spi_device1 = {
+	.name = "spi_imx",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(mxc_spi_resources1),
+	.resource = mxc_spi_resources1,
+};
+
+static struct resource mxc_spi_resources2[] = {
+	{
+	       .start = 0x50004000,
+	       .end = 0x50007fff,
+	       .flags = IORESOURCE_MEM,
+	}, {
+	       .start = 0,
+	       .end = 0,
+	       .flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_spi_device2 = {
+	.name = "spi_imx",
+	.id = 2,
+	.num_resources = ARRAY_SIZE(mxc_spi_resources2),
+	.resource = mxc_spi_resources2,
+};
+
+static struct resource mxc_pwm_resources0[] = {
+	{
+		.start	= 0x53fe0000,
+		.end	= 0x53fe3fff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start   = 26,
+		.end     = 26,
+		.flags   = IORESOURCE_IRQ,
+	}
+};
+
+struct platform_device mxc_pwm_device0 = {
+	.name = "mxc_pwm",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(mxc_pwm_resources0),
+	.resource = mxc_pwm_resources0,
+};
+
+static struct resource mxc_pwm_resources1[] = {
+	{
+		.start	= 0x53fa0000,
+		.end	= 0x53fa3fff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start   = 36,
+		.end     = 36,
+		.flags   = IORESOURCE_IRQ,
+	}
+};
+
+struct platform_device mxc_pwm_device1 = {
+	.name = "mxc_pwm",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(mxc_pwm_resources1),
+	.resource = mxc_pwm_resources1,
+};
+
+static struct resource mxc_pwm_resources2[] = {
+	{
+		.start	= 0x53fa8000,
+		.end	= 0x53fabfff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start   = 41,
+		.end     = 41,
+		.flags   = IORESOURCE_IRQ,
+	}
+};
+
+struct platform_device mxc_pwm_device2 = {
+	.name = "mxc_pwm",
+	.id = 2,
+	.num_resources = ARRAY_SIZE(mxc_pwm_resources2),
+	.resource = mxc_pwm_resources2,
+};
+
+static struct resource mxc_keypad_resources[] = {
+	{
+		.start	= 0x43fa8000,
+		.end	= 0x43fabfff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start   = 24,
+		.end     = 24,
+		.flags   = IORESOURCE_IRQ,
+	}
+};
+
+struct platform_device mxc_keypad_device = {
+	.name = "mxc-keypad",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(mxc_keypad_resources),
+	.resource = mxc_keypad_resources,
+};
+
+static struct resource mxc_pwm_resources3[] = {
+	{
+		.start	= 0x53fc8000,
+		.end	= 0x53fcbfff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start   = 42,
+		.end     = 42,
+		.flags   = IORESOURCE_IRQ,
+	}
+};
+
+struct platform_device mxc_pwm_device3 = {
+	.name = "mxc_pwm",
+	.id = 3,
+	.num_resources = ARRAY_SIZE(mxc_pwm_resources3),
+	.resource = mxc_pwm_resources3,
+};
+
+static struct resource mxc_i2c_1_resources[] = {
+	{
+		.start	= 0x43f80000,
+		.end	= 0x43f83fff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= 3,
+		.end	= 3,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+struct platform_device mxc_i2c_device0 = {
+	.name = "imx-i2c",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(mxc_i2c_1_resources),
+	.resource = mxc_i2c_1_resources,
+};
+
+static struct resource mxc_i2c_2_resources[] = {
+	{
+		.start	= 0x43f98000,
+		.end	= 0x43f9bfff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= 4,
+		.end	= 4,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+struct platform_device mxc_i2c_device1 = {
+	.name = "imx-i2c",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(mxc_i2c_2_resources),
+	.resource = mxc_i2c_2_resources,
+};
+
+static struct resource mxc_i2c_3_resources[] = {
+	{
+		.start	= 0x43f84000,
+		.end	= 0x43f87fff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= 10,
+		.end	= 10,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+struct platform_device mxc_i2c_device2 = {
+	.name = "imx-i2c",
+	.id = 2,
+	.num_resources = ARRAY_SIZE(mxc_i2c_3_resources),
+	.resource = mxc_i2c_3_resources,
+};
+
+static struct mxc_gpio_port imx_gpio_ports[] = {
+	{
+		.chip.label = "gpio-0",
+		.base = (void __iomem *)MX25_GPIO1_BASE_ADDR_VIRT,
+		.irq = 52,
+		.virtual_irq_start = MXC_GPIO_IRQ_START,
+	}, {
+		.chip.label = "gpio-1",
+		.base = (void __iomem *)MX25_GPIO2_BASE_ADDR_VIRT,
+		.irq = 51,
+		.virtual_irq_start = MXC_GPIO_IRQ_START + 32,
+	}, {
+		.chip.label = "gpio-2",
+		.base = (void __iomem *)MX25_GPIO3_BASE_ADDR_VIRT,
+		.irq = 16,
+		.virtual_irq_start = MXC_GPIO_IRQ_START + 64,
+	}, {
+		.chip.label = "gpio-3",
+		.base = (void __iomem *)MX25_GPIO4_BASE_ADDR_VIRT,
+		.irq = 23,
+		.virtual_irq_start = MXC_GPIO_IRQ_START + 96,
+	}
+};
+
+int __init mxc_register_gpios(void)
+{
+	return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports));
+}
+
diff --git a/arch/arm/mach-mx25/devices.h b/arch/arm/mach-mx25/devices.h
new file mode 100644
index 00000000000..fe6bf88ad1d
--- /dev/null
+++ b/arch/arm/mach-mx25/devices.h
@@ -0,0 +1,19 @@
+extern struct platform_device mxc_uart_device0;
+extern struct platform_device mxc_uart_device1;
+extern struct platform_device mxc_uart_device2;
+extern struct platform_device mxc_uart_device3;
+extern struct platform_device mxc_uart_device4;
+extern struct platform_device mxc_otg;
+extern struct platform_device otg_udc_device;
+extern struct platform_device mxc_usbh2;
+extern struct platform_device mxc_spi_device0;
+extern struct platform_device mxc_spi_device1;
+extern struct platform_device mxc_spi_device2;
+extern struct platform_device mxc_pwm_device0;
+extern struct platform_device mxc_pwm_device1;
+extern struct platform_device mxc_pwm_device2;
+extern struct platform_device mxc_pwm_device3;
+extern struct platform_device mxc_keypad_device;
+extern struct platform_device mxc_i2c_device0;
+extern struct platform_device mxc_i2c_device1;
+extern struct platform_device mxc_i2c_device2;
diff --git a/arch/arm/mach-mx25/mm.c b/arch/arm/mach-mx25/mm.c
new file mode 100644
index 00000000000..a7e587ff3e9
--- /dev/null
+++ b/arch/arm/mach-mx25/mm.c
@@ -0,0 +1,76 @@
+/*
+ *  Copyright (C) 1999,2000 Arm Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ *  Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *    - add MX31 specific definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/err.h>
+
+#include <asm/pgtable.h>
+#include <asm/mach/map.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/mx25.h>
+#include <mach/iomux-v3.h>
+
+/*
+ * This table defines static virtual address mappings for I/O regions.
+ * These are the mappings common across all MX3 boards.
+ */
+static struct map_desc mxc_io_desc[] __initdata = {
+	{
+		.virtual	= MX25_AVIC_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(MX25_AVIC_BASE_ADDR),
+		.length		= MX25_AVIC_SIZE,
+		.type		= MT_DEVICE_NONSHARED
+	}, {
+		.virtual	= MX25_AIPS1_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(MX25_AIPS1_BASE_ADDR),
+		.length		= MX25_AIPS1_SIZE,
+		.type		= MT_DEVICE_NONSHARED
+	}, {
+		.virtual	= MX25_AIPS2_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(MX25_AIPS2_BASE_ADDR),
+		.length		= MX25_AIPS2_SIZE,
+		.type		= MT_DEVICE_NONSHARED
+	},
+};
+
+/*
+ * This function initializes the memory map. It is called during the
+ * system startup to create static physical to virtual memory mappings
+ * for the IO modules.
+ */
+void __init mx25_map_io(void)
+{
+	mxc_set_cpu_type(MXC_CPU_MX25);
+	mxc_iomux_v3_init(MX25_IO_ADDRESS(MX25_IOMUXC_BASE_ADDR));
+	mxc_arch_reset_init(MX25_IO_ADDRESS(MX25_WDOG_BASE_ADDR));
+
+	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
+}
+
+void __init mx25_init_irq(void)
+{
+	mxc_init_irq((void __iomem *)MX25_AVIC_BASE_ADDR_VIRT);
+}
+
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index 0617c19f85c..e342a2e6160 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -20,6 +20,13 @@ config ARCH_MX2
 	help
 	  This enables support for systems based on the Freescale i.MX2 family
 
+config ARCH_MX25
+	bool "MX25-based"
+	select CPU_ARM926T
+	select COMMON_CLKDEV
+	help
+	  This enables support for systems based on the Freescale i.MX25 family
+
 config ARCH_MX3
 	bool "MX3-based"
 	select CPU_V6
@@ -32,6 +39,7 @@ endchoice
 source "arch/arm/mach-mx1/Kconfig"
 source "arch/arm/mach-mx2/Kconfig"
 source "arch/arm/mach-mx3/Kconfig"
+source "arch/arm/mach-mx25/Kconfig"
 
 endmenu
 
diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c
index f0315edb3eb..cfc4a8b43e6 100644
--- a/arch/arm/plat-mxc/gpio.c
+++ b/arch/arm/plat-mxc/gpio.c
@@ -297,7 +297,7 @@ int __init mxc_gpio_init(struct mxc_gpio_port *port, int cnt)
 		/* its a serious configuration bug when it fails */
 		BUG_ON( gpiochip_add(&port[i].chip) < 0 );
 
-		if (cpu_is_mx1() || cpu_is_mx3()) {
+		if (cpu_is_mx1() || cpu_is_mx3() || cpu_is_mx25()) {
 			/* setup one handler for each entry */
 			set_irq_chained_handler(port[i].irq, mx3_gpio_irq_handler);
 			set_irq_data(port[i].irq, &port[i]);
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index cd8f215c1ad..4e7af741239 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -16,18 +16,21 @@ struct clk;
 
 extern void mx1_map_io(void);
 extern void mx21_map_io(void);
+extern void mx25_map_io(void);
 extern void mx27_map_io(void);
 extern void mx31_map_io(void);
 extern void mx35_map_io(void);
 extern void mxc_init_irq(void __iomem *);
 extern void mx1_init_irq(void);
 extern void mx21_init_irq(void);
+extern void mx25_init_irq(void);
 extern void mx27_init_irq(void);
 extern void mx31_init_irq(void);
 extern void mx35_init_irq(void);
 extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int);
 extern int mx1_clocks_init(unsigned long fref);
 extern int mx21_clocks_init(unsigned long lref, unsigned long fref);
+extern int mx25_clocks_init(unsigned long fref);
 extern int mx27_clocks_init(unsigned long fref);
 extern int mx31_clocks_init(unsigned long fref);
 extern int mx35_clocks_init(void);
diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S
index 4f85acd74af..bf683de56b7 100644
--- a/arch/arm/plat-mxc/include/mach/debug-macro.S
+++ b/arch/arm/plat-mxc/include/mach/debug-macro.S
@@ -17,6 +17,15 @@
 #define UART_VADDR	IO_ADDRESS(UART1_BASE_ADDR)
 #endif
 
+#ifdef CONFIG_ARCH_MX25
+#ifdef UART_PADDR
+#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
+#endif
+#include <mach/mx25.h>
+#define UART_PADDR	UART1_BASE_ADDR
+#define UART_VADDR	MX25_AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
+#endif
+
 #ifdef CONFIG_ARCH_MX2
 #ifdef UART_PADDR
 #error "CONFIG_DEBUG_LL is incompatible with multiple archs"
diff --git a/arch/arm/plat-mxc/include/mach/hardware.h b/arch/arm/plat-mxc/include/mach/hardware.h
index 42e4ee37ca1..569af3239c3 100644
--- a/arch/arm/plat-mxc/include/mach/hardware.h
+++ b/arch/arm/plat-mxc/include/mach/hardware.h
@@ -42,6 +42,10 @@
 # include <mach/mx1.h>
 #endif
 
+#ifdef CONFIG_ARCH_MX25
+# include <mach/mx25.h>
+#endif
+
 #include <mach/mxc.h>
 
 #endif /* __ASM_ARCH_MXC_HARDWARE_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h
index 518a36504b8..f39e016c1cc 100644
--- a/arch/arm/plat-mxc/include/mach/irqs.h
+++ b/arch/arm/plat-mxc/include/mach/irqs.h
@@ -24,6 +24,8 @@
 #define MXC_GPIO_IRQS		(32 * 6)
 #elif defined CONFIG_ARCH_MX3
 #define MXC_GPIO_IRQS		(32 * 3)
+#elif defined CONFIG_ARCH_MX25
+#define MXC_GPIO_IRQS		(32 * 4)
 #endif
 
 /*
diff --git a/arch/arm/plat-mxc/include/mach/memory.h b/arch/arm/plat-mxc/include/mach/memory.h
index 6065e00176e..42db7394111 100644
--- a/arch/arm/plat-mxc/include/mach/memory.h
+++ b/arch/arm/plat-mxc/include/mach/memory.h
@@ -22,6 +22,8 @@
 #endif
 #elif defined CONFIG_ARCH_MX3
 #define PHYS_OFFSET		UL(0x80000000)
+#elif defined CONFIG_ARCH_MX25
+#define PHYS_OFFSET		UL(0x80000000)
 #endif
 
 #if defined(CONFIG_MX1_VIDEO)
diff --git a/arch/arm/plat-mxc/include/mach/mx25.h b/arch/arm/plat-mxc/include/mach/mx25.h
new file mode 100644
index 00000000000..ec64bd9a8ab
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/mx25.h
@@ -0,0 +1,44 @@
+#ifndef __MACH_MX25_H__
+#define __MACH_MX25_H__
+
+#define MX25_AIPS1_BASE_ADDR		0x43F00000
+#define MX25_AIPS1_BASE_ADDR_VIRT	0xFC000000
+#define MX25_AIPS1_SIZE			SZ_1M
+#define MX25_AIPS2_BASE_ADDR		0x53F00000
+#define MX25_AIPS2_BASE_ADDR_VIRT	0xFC200000
+#define MX25_AIPS2_SIZE			SZ_1M
+#define MX25_AVIC_BASE_ADDR		0x68000000
+#define MX25_AVIC_BASE_ADDR_VIRT	0xFC400000
+#define MX25_AVIC_SIZE			SZ_1M
+
+#define MX25_IOMUXC_BASE_ADDR		(MX25_AIPS1_BASE_ADDR + 0xac000)
+
+#define MX25_CRM_BASE_ADDR		(MX25_AIPS2_BASE_ADDR + 0x80000)
+#define MX25_GPT1_BASE_ADDR		(MX25_AIPS2_BASE_ADDR + 0x90000)
+#define MX25_WDOG_BASE_ADDR		(MX25_AIPS2_BASE_ADDR + 0xdc000)
+
+#define MX25_GPIO1_BASE_ADDR_VIRT	(MX25_AIPS2_BASE_ADDR_VIRT + 0xcc000)
+#define MX25_GPIO2_BASE_ADDR_VIRT	(MX25_AIPS2_BASE_ADDR_VIRT + 0xd0000)
+#define MX25_GPIO3_BASE_ADDR_VIRT	(MX25_AIPS2_BASE_ADDR_VIRT + 0xa4000)
+#define MX25_GPIO4_BASE_ADDR_VIRT	(MX25_AIPS2_BASE_ADDR_VIRT + 0x9c000)
+
+#define MX25_AIPS1_IO_ADDRESS(x)  \
+	(((x) - MX25_AIPS1_BASE_ADDR) + MX25_AIPS1_BASE_ADDR_VIRT)
+#define MX25_AIPS2_IO_ADDRESS(x)  \
+	(((x) - MX25_AIPS2_BASE_ADDR) + MX25_AIPS2_BASE_ADDR_VIRT)
+#define MX25_AVIC_IO_ADDRESS(x)  \
+	(((x) - MX25_AVIC_BASE_ADDR) + MX25_AVIC_BASE_ADDR_VIRT)
+
+#define __in_range(addr, name)	((addr) >= name##_BASE_ADDR && (addr) < name##_BASE_ADDR + name##_SIZE)
+
+#define MX25_IO_ADDRESS(x)					\
+	(void __force __iomem *)				\
+	(__in_range(x, MX25_AIPS1) ? MX25_AIPS1_IO_ADDRESS(x) :	\
+	__in_range(x, MX25_AIPS2) ? MX25_AIPS2_IO_ADDRESS(x) :	\
+	__in_range(x, MX25_AVIC) ? MX25_AVIC_IO_ADDRESS(x) :	\
+	0xDEADBEEF)
+
+#define UART1_BASE_ADDR			0x43f90000
+#define UART2_BASE_ADDR			0x43f94000
+
+#endif /* __MACH_MX25_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mxc.h b/arch/arm/plat-mxc/include/mach/mxc.h
index 5fa2a07f4ea..882b816729b 100644
--- a/arch/arm/plat-mxc/include/mach/mxc.h
+++ b/arch/arm/plat-mxc/include/mach/mxc.h
@@ -26,6 +26,7 @@
 
 #define MXC_CPU_MX1		1
 #define MXC_CPU_MX21		21
+#define MXC_CPU_MX25		25
 #define MXC_CPU_MX27		27
 #define MXC_CPU_MX31		31
 #define MXC_CPU_MX35		35
@@ -58,6 +59,18 @@ extern unsigned int __mxc_cpu_type;
 # define cpu_is_mx21()		(0)
 #endif
 
+#ifdef CONFIG_ARCH_MX25
+# ifdef mxc_cpu_type
+#  undef mxc_cpu_type
+#  define mxc_cpu_type __mxc_cpu_type
+# else
+#  define mxc_cpu_type MXC_CPU_MX25
+# endif
+# define cpu_is_mx25()		(mxc_cpu_type == MXC_CPU_MX25)
+#else
+# define cpu_is_mx25()		(0)
+#endif
+
 #ifdef CONFIG_MACH_MX27
 # ifdef mxc_cpu_type
 #  undef mxc_cpu_type
diff --git a/arch/arm/plat-mxc/include/mach/timex.h b/arch/arm/plat-mxc/include/mach/timex.h
index 07b4a73c9d2..0707b7d5b5c 100644
--- a/arch/arm/plat-mxc/include/mach/timex.h
+++ b/arch/arm/plat-mxc/include/mach/timex.h
@@ -26,6 +26,8 @@
 #define CLOCK_TICK_RATE		13300000
 #elif defined CONFIG_ARCH_MX3
 #define CLOCK_TICK_RATE		16625000
+#elif defined CONFIG_ARCH_MX25
+#define CLOCK_TICK_RATE		16000000
 #endif
 
 #endif				/* __ASM_ARCH_MXC_TIMEX_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h
index 98c8a60214d..b6650e705e3 100644
--- a/arch/arm/plat-mxc/include/mach/uncompress.h
+++ b/arch/arm/plat-mxc/include/mach/uncompress.h
@@ -63,6 +63,7 @@ static void putc(int ch)
 #define flush() do { } while (0)
 
 #define MX1_UART1_BASE_ADDR	0x00206000
+#define MX25_UART1_BASE_ADDR	0x43f90000
 #define MX2X_UART1_BASE_ADDR	0x1000a000
 #define MX3X_UART1_BASE_ADDR	0x43F90000
 
-- 
cgit v1.2.3


From 635baf6b40ebaef683abf87d677467cba71a0d50 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Thu, 4 Jun 2009 11:32:46 +0200
Subject: Freescale i.MX25 PDK (3ds) board support

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx25/Kconfig                  |  4 ++
 arch/arm/mach-mx25/Makefile                 |  1 +
 arch/arm/mach-mx25/mx25pdk.c                | 58 +++++++++++++++++++++++++++++
 arch/arm/plat-mxc/include/mach/uncompress.h |  3 ++
 4 files changed, 66 insertions(+)
 create mode 100644 arch/arm/mach-mx25/mx25pdk.c

(limited to 'arch')

diff --git a/arch/arm/mach-mx25/Kconfig b/arch/arm/mach-mx25/Kconfig
index 14c918bad52..cc28f56eae8 100644
--- a/arch/arm/mach-mx25/Kconfig
+++ b/arch/arm/mach-mx25/Kconfig
@@ -2,4 +2,8 @@ if ARCH_MX25
 
 comment "MX25 platforms:"
 
+config MACH_MX25_3DS
+	select ARCH_MXC_IOMUX_V3
+	bool "Support MX25PDK (3DS) Platform"
+
 endif
diff --git a/arch/arm/mach-mx25/Makefile b/arch/arm/mach-mx25/Makefile
index 5471086d5e1..fe23836a9f3 100644
--- a/arch/arm/mach-mx25/Makefile
+++ b/arch/arm/mach-mx25/Makefile
@@ -1,2 +1,3 @@
 obj-y				:= mm.o devices.o
 obj-$(CONFIG_ARCH_MX25)		+= clock.o
+obj-$(CONFIG_MACH_MX25_3DS)	+= mx25pdk.o
diff --git a/arch/arm/mach-mx25/mx25pdk.c b/arch/arm/mach-mx25/mx25pdk.c
new file mode 100644
index 00000000000..92aa4fd19d9
--- /dev/null
+++ b/arch/arm/mach-mx25/mx25pdk.c
@@ -0,0 +1,58 @@
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/smsc911x.h>
+#include <linux/platform_device.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/memory.h>
+#include <asm/mach/map.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/mx25.h>
+#include <mach/mxc_nand.h>
+#include "devices.h"
+#include <mach/iomux-v3.h>
+
+static struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct mxc_nand_platform_data nand_board_info = {
+	.width = 1,
+	.hw_ecc = 1,
+};
+
+static void __init mx25pdk_init(void)
+{
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	mxc_register_device(&mxc_usbh2, NULL);
+	mxc_register_device(&mxc_nand_device, &nand_board_info);
+}
+
+
+static void __init mx25pdk_timer_init(void)
+{
+	mx25_clocks_init(26000000);
+}
+
+static struct sys_timer mx25pdk_timer = {
+	.init   = mx25pdk_timer_init,
+};
+
+MACHINE_START(MX25_3DS, "Freescale MX25PDK (3DS)")
+	/* Maintainer: Freescale Semiconductor, Inc. */
+	.phys_io	= MX25_AIPS1_BASE_ADDR,
+	.io_pg_offst	= ((MX25_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = PHYS_OFFSET + 0x100,
+	.map_io         = mx25_map_io,
+	.init_irq       = mx25_init_irq,
+	.init_machine   = mx25pdk_init,
+	.timer          = &mx25pdk_timer,
+MACHINE_END
+
diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h
index b6650e705e3..1e24499f20b 100644
--- a/arch/arm/plat-mxc/include/mach/uncompress.h
+++ b/arch/arm/plat-mxc/include/mach/uncompress.h
@@ -74,6 +74,9 @@ static __inline__ void __arch_decomp_setup(unsigned long arch_id)
 	case MACH_TYPE_SCB9328:
 		uart_base = MX1_UART1_BASE_ADDR;
 		break;
+	case MACH_TYPE_MX25_3DS:
+		uart_base = MX25_UART1_BASE_ADDR;
+		break;
 	case MACH_TYPE_IMX27LITE:
 	case MACH_TYPE_MX27_3DS:
 	case MACH_TYPE_MX27ADS:
-- 
cgit v1.2.3


From cf983c93aea2a6cd6de5b405b7506af7732f91d0 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Wed, 15 Jul 2009 09:31:15 +0200
Subject: fix mx35 wrong clock

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/clock-imx35.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c
index 4cf1849f552..1dbcdc07257 100644
--- a/arch/arm/mach-mx3/clock-imx35.c
+++ b/arch/arm/mach-mx3/clock-imx35.c
@@ -456,7 +456,7 @@ int __init mx35_clocks_init()
 	__raw_writel((3 << 26) | ll, CCM_BASE + CCM_CGR2);
 	__raw_writel(0, CCM_BASE + CCM_CGR3);
 
-	mxc_timer_init(&ipg_clk, IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT);
+	mxc_timer_init(&gpt_clk, IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT);
 
 	return 0;
 }
-- 
cgit v1.2.3


From 8e5be212cba6675dc363a224ce4a98bb07039b4b Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Lothar=20Wa=C3=9Fmann?= <LW@KARO-electronics.de>
Date: Wed, 15 Jul 2009 15:19:34 +0200
Subject: i.MX25 iomux definitions (corrected version)

Signed-off-by: Lothar Wassmann <LW@KARO-electronics.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/include/mach/iomux-mx25.h | 517 ++++++++++++++++++++++++++++
 arch/arm/plat-mxc/include/mach/iomux.h      |   6 +
 2 files changed, 523 insertions(+)
 create mode 100644 arch/arm/plat-mxc/include/mach/iomux-mx25.h

(limited to 'arch')

diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx25.h b/arch/arm/plat-mxc/include/mach/iomux-mx25.h
new file mode 100644
index 00000000000..810c47f56e7
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx25.h
@@ -0,0 +1,517 @@
+/*
+ * arch/arm/plat-mxc/include/mach/iomux-mx25.h
+ *
+ * Copyright (C) 2009 by Lothar Wassmann <LW@KARO-electronics.de>
+ *
+ * based on arch/arm/mach-mx25/mx25_pins.h
+ *    Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ * and
+ * arch/arm/plat-mxc/include/mach/iomux-mx35.h
+ *    Copyright (C, NO_PAD_CTRL) 2009 by Jan Weitzel Phytec Messtechnik GmbH <armlinux@phytec.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#ifndef __IOMUX_MX25_H__
+#define __IOMUX_MX25_H__
+
+#include <mach/iomux-v3.h>
+
+#ifndef GPIO_PORTA
+#error Please include mach/iomux.h
+#endif
+
+/*
+ *
+ * @brief MX25 I/O Pin List
+ *
+ * @ingroup GPIO_MX25
+ */
+
+#ifndef __ASSEMBLY__
+
+/*
+ * IOMUX/PAD Bit field definitions
+ */
+
+#define MX25_PAD_A10__A10		IOMUX_PAD(0x000, 0x008, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A10__GPIO_4_0		IOMUX_PAD(0x000, 0x008, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_A13__A13		IOMUX_PAD(0x22C, 0x00c, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A13__GPIO_4_1		IOMUX_PAD(0x22C, 0x00c, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_A14__A14		IOMUX_PAD(0x230, 0x010, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A14__GPIO_2_0		IOMUX_PAD(0x230, 0x010, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_A15__A15		IOMUX_PAD(0x234, 0x014, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A15__GPIO_2_1		IOMUX_PAD(0x234, 0x014, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_A16__A16		IOMUX_PAD(0x000, 0x018, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A16__GPIO_2_2		IOMUX_PAD(0x000, 0x018, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_A17__A17		IOMUX_PAD(0x238, 0x01c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A17__GPIO_2_3		IOMUX_PAD(0x238, 0x01c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_A18__A18		IOMUX_PAD(0x23c, 0x020, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A18__GPIO_2_4		IOMUX_PAD(0x23c, 0x020, 0x15, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A18__FEC_COL		IOMUX_PAD(0x23c, 0x020, 0x17, 0x504, 0, NO_PAD_CTL)
+
+#define MX25_PAD_A19__A19		IOMUX_PAD(0x240, 0x024, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A19__FEC_RX_ER		IOMUX_PAD(0x240, 0x024, 0x17, 0x518, 0, NO_PAD_CTL)
+#define MX25_PAD_A19__GPIO_2_5		IOMUX_PAD(0x240, 0x024, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_A20__A20		IOMUX_PAD(0x244, 0x028, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A20__GPIO_2_6		IOMUX_PAD(0x244, 0x028, 0x15, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A20__FEC_RDATA2	IOMUX_PAD(0x244, 0x028, 0x17, 0x50c, 0, NO_PAD_CTL)
+
+#define MX25_PAD_A21__A21		IOMUX_PAD(0x248, 0x02c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A21__GPIO_2_7		IOMUX_PAD(0x248, 0x02c, 0x15, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A21__FEC_RDATA3	IOMUX_PAD(0x248, 0x02c, 0x17, 0x510, 0, NO_PAD_CTL)
+
+#define MX25_PAD_A22__A22		IOMUX_PAD(0x000, 0x030, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A22__GPIO_2_8		IOMUX_PAD(0x000, 0x030, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_A23__A23		IOMUX_PAD(0x24c, 0x034, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A23__GPIO_2_9		IOMUX_PAD(0x24c, 0x034, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_A24__A24		IOMUX_PAD(0x250, 0x038, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A24__GPIO_2_10		IOMUX_PAD(0x250, 0x038, 0x15, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A24__FEC_RX_CLK	IOMUX_PAD(0x250, 0x038, 0x17, 0x514, 0, NO_PAD_CTL)
+
+#define MX25_PAD_A25__A25		IOMUX_PAD(0x254, 0x03c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A25__GPIO_2_11		IOMUX_PAD(0x254, 0x03c, 0x15, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_A25__FEC_CRS		IOMUX_PAD(0x254, 0x03c, 0x17, 0x508, 0, NO_PAD_CTL)
+
+#define MX25_PAD_EB0__EB0		IOMUX_PAD(0x258, 0x040, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_EB0__AUD4_TXD		IOMUX_PAD(0x258, 0x040, 0x14, 0x464, 0, NO_PAD_CTRL)
+#define MX25_PAD_EB0__GPIO_2_12		IOMUX_PAD(0x258, 0x040, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_EB1__EB1		IOMUX_PAD(0x25c, 0x044, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_EB1__AUD4_RXD		IOMUX_PAD(0x25c, 0x044, 0x14, 0x460, 0, NO_PAD_CTRL)
+#define MX25_PAD_EB1__GPIO_2_13		IOMUX_PAD(0x25c, 0x044, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_OE__OE			IOMUX_PAD(0x260, 0x048, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_OE__AUD4_TXC		IOMUX_PAD(0x260, 0x048, 0x14, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_OE__GPIO_2_14		IOMUX_PAD(0x260, 0x048, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CS0__CS0		IOMUX_PAD(0x000, 0x04c, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CS0__GPIO_4_2		IOMUX_PAD(0x000, 0x04c, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CS1__CS1		IOMUX_PAD(0x000, 0x050, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CS1__GPIO_4_3		IOMUX_PAD(0x000, 0x050, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CS4__CS4		IOMUX_PAD(0x264, 0x054, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CS4__UART5_CTS		IOMUX_PAD(0x264, 0x054, 0x13, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CS4__GPIO_3_20		IOMUX_PAD(0x264, 0x054, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CS5__CS5		IOMUX_PAD(0x268, 0x058, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CS5__UART5_RTS		IOMUX_PAD(0x268, 0x058, 0x13, 0x574, 0, NO_PAD_CTRL)
+#define MX25_PAD_CS5__GPIO_3_21		IOMUX_PAD(0x268, 0x058, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_NF_CE0__NF_CE0		IOMUX_PAD(0x26c, 0x05c, 0x10, 0, 0, NO_PAD_CTL)
+#define MX25_PAD_NF_CE0__GPIO_3_22	IOMUX_PAD(0x26c, 0x05c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_ECB__ECB		IOMUX_PAD(0x270, 0x060, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_ECB__UART5_TXD_MUX	IOMUX_PAD(0x270, 0x060, 0x13, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_ECB__GPIO_3_23		IOMUX_PAD(0x270, 0x060, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_LBA__LBA		IOMUX_PAD(0x274, 0x064, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LBA__UART5_RXD_MUX	IOMUX_PAD(0x274, 0x064, 0x13, 0x578, 0, NO_PAD_CTRL)
+#define MX25_PAD_LBA__GPIO_3_24		IOMUX_PAD(0x274, 0x064, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_BCLK__BCLK		IOMUX_PAD(0x000, 0x068, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_BCLK__GPIO_4_4		IOMUX_PAD(0x000, 0x068, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_RW__RW			IOMUX_PAD(0x278, 0x06c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_RW__AUD4_TXFS		IOMUX_PAD(0x278, 0x06c, 0x14, 0x474, 0, NO_PAD_CTRL)
+#define MX25_PAD_RW__GPIO_3_25		IOMUX_PAD(0x278, 0x06c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_NFWE_B__NFWE_B		IOMUX_PAD(0x000, 0x070, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_NFWE_B__GPIO_3_26	IOMUX_PAD(0x000, 0x070, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_NFRE_B__NFRE_B		IOMUX_PAD(0x000, 0x074, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_NFRE_B__GPIO_3_27	IOMUX_PAD(0x000, 0x074, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_NFALE__NFALE		IOMUX_PAD(0x000, 0x078, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_NFALE__GPIO_3_28	IOMUX_PAD(0x000, 0x078, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_NFCLE__NFCLE		IOMUX_PAD(0x000, 0x07c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_NFCLE__GPIO_3_29	IOMUX_PAD(0x000, 0x07c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_NFWP_B__NFWP_B		IOMUX_PAD(0x000, 0x080, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_NFWP_B__GPIO_3_30	IOMUX_PAD(0x000, 0x080, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_NFRB__NFRB		IOMUX_PAD(0x27c, 0x084, 0x10, 0, 0, PAD_CTL_PKE)
+#define MX25_PAD_NFRB__GPIO_3_31	IOMUX_PAD(0x27c, 0x084, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D15__D15		IOMUX_PAD(0x280, 0x088, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D15__LD16		IOMUX_PAD(0x280, 0x088, 0x01, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D15__GPIO_4_5		IOMUX_PAD(0x280, 0x088, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D14__D14		IOMUX_PAD(0x284, 0x08c, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D14__LD17		IOMUX_PAD(0x284, 0x08c, 0x01, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D14__GPIO_4_6		IOMUX_PAD(0x284, 0x08c, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D13__D13		IOMUX_PAD(0x288, 0x090, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D13__LD18		IOMUX_PAD(0x288, 0x090, 0x01, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D13__GPIO_4_7		IOMUX_PAD(0x288, 0x090, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D12__D12		IOMUX_PAD(0x28c, 0x094, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D12__GPIO_4_8		IOMUX_PAD(0x28c, 0x094, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D11__D11		IOMUX_PAD(0x290, 0x098, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D11__GPIO_4_9		IOMUX_PAD(0x290, 0x098, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D10__D10		IOMUX_PAD(0x294, 0x09c, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D10__GPIO_4_10		IOMUX_PAD(0x294, 0x09c, 0x05, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D10__USBOTG_OC		IOMUX_PAD(0x294, 0x09c, 0x06, 0x57c, 0, PAD_CTL_PUS_100K_UP)
+
+#define MX25_PAD_D9__D9			IOMUX_PAD(0x298, 0x0a0, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D9__GPIO_4_11		IOMUX_PAD(0x298, 0x0a0, 0x05, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D9__USBH2_PWR		IOMUX_PAD(0x298, 0x0a0, 0x06, 0, 0, PAD_CTL_PKE)
+
+#define MX25_PAD_D8__D8			IOMUX_PAD(0x29c, 0x0a4, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D8__GPIO_4_12		IOMUX_PAD(0x29c, 0x0a4, 0x05, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D8__USBH2_OC		IOMUX_PAD(0x29c, 0x0a4, 0x06, 0x580, 0, PAD_CTL_PUS_100K_UP)
+
+#define MX25_PAD_D7__D7			IOMUX_PAD(0x2a0, 0x0a8, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D7__GPIO_4_13		IOMUX_PAD(0x2a0, 0x0a8, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D6__D6			IOMUX_PAD(0x2a4, 0x0ac, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D6__GPIO_4_14		IOMUX_PAD(0x2a4, 0x0ac, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D5__D5			IOMUX_PAD(0x2a8, 0x0b0, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D5__GPIO_4_15		IOMUX_PAD(0x2a8, 0x0b0, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D4__D4			IOMUX_PAD(0x2ac, 0x0b4, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D4__GPIO_4_16		IOMUX_PAD(0x2ac, 0x0b4, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D3__D3			IOMUX_PAD(0x2b0, 0x0b8, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D3__GPIO_4_17		IOMUX_PAD(0x2b0, 0x0b8, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D2__D2			IOMUX_PAD(0x2b4, 0x0bc, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D2__GPIO_4_18		IOMUX_PAD(0x2b4, 0x0bc, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D1__D1			IOMUX_PAD(0x2b8, 0x0c0, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D1__GPIO_4_19		IOMUX_PAD(0x2b8, 0x0c0, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_D0__D0			IOMUX_PAD(0x2bc, 0x0c4, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_D0__GPIO_4_20		IOMUX_PAD(0x2bc, 0x0c4, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_LD0__LD0		IOMUX_PAD(0x2c0, 0x0c8, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD0__CSI_D0		IOMUX_PAD(0x2c0, 0x0c8, 0x12, 0x488, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD0__GPIO_2_15		IOMUX_PAD(0x2c0, 0x0c8, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_LD1__LD1		IOMUX_PAD(0x2c4, 0x0cc, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD1__CSI_D1		IOMUX_PAD(0x2c4, 0x0cc, 0x12, 0x48c, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD1__GPIO_2_16		IOMUX_PAD(0x2c4, 0x0cc, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_LD2__LD2		IOMUX_PAD(0x2c8, 0x0d0, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD2__GPIO_2_17		IOMUX_PAD(0x2c8, 0x0d0, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_LD3__LD3		IOMUX_PAD(0x2cc, 0x0d4, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD3__GPIO_2_18		IOMUX_PAD(0x2cc, 0x0d4, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_LD4__LD4		IOMUX_PAD(0x2d0, 0x0d8, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD4__GPIO_2_19		IOMUX_PAD(0x2d0, 0x0d8, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_LD5__LD5		IOMUX_PAD(0x2d4, 0x0dc, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD5__GPIO_1_19		IOMUX_PAD(0x2d4, 0x0dc, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_LD6__LD6		IOMUX_PAD(0x2d8, 0x0e0, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD6__GPIO_1_20		IOMUX_PAD(0x2d8, 0x0e0, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_LD7__LD7		IOMUX_PAD(0x2dc, 0x0e4, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD7__GPIO_1_21		IOMUX_PAD(0x2dc, 0x0e4, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_LD8__LD8		IOMUX_PAD(0x2e0, 0x0e8, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD8__FEC_TX_ERR	IOMUX_PAD(0x2e0, 0x0e8, 0x15, 0, 0, NO_PAD_CTL)
+
+#define MX25_PAD_LD9__LD9		IOMUX_PAD(0x2e4, 0x0ec, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD9__FEC_COL		IOMUX_PAD(0x2e4, 0x0ec, 0x15, 0x504, 1, NO_PAD_CTL)
+
+#define MX25_PAD_LD10__LD10		IOMUX_PAD(0x2e8, 0x0f0, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD10__FEC_RX_ER	IOMUX_PAD(0x2e8, 0x0f0, 0x15, 0x518, 1, NO_PAD_CTL)
+
+#define MX25_PAD_LD11__LD11		IOMUX_PAD(0x2ec, 0x0f4, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD11__FEC_RDATA2	IOMUX_PAD(0x2ec, 0x0f4, 0x15, 0x50c, 1, NO_PAD_CTL)
+
+#define MX25_PAD_LD12__LD12		IOMUX_PAD(0x2f0, 0x0f8, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD12__FEC_RDATA3	IOMUX_PAD(0x2f0, 0x0f8, 0x15, 0x510, 1, NO_PAD_CTL)
+
+#define MX25_PAD_LD13__LD13		IOMUX_PAD(0x2f4, 0x0fc, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD13__FEC_TDATA2	IOMUX_PAD(0x2f4, 0x0fc, 0x15, 0, 0, NO_PAD_CTL)
+
+#define MX25_PAD_LD14__LD14		IOMUX_PAD(0x2f8, 0x100, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD14__FEC_TDATA3	IOMUX_PAD(0x2f8, 0x100, 0x15, 0, 0, NO_PAD_CTL)
+
+#define MX25_PAD_LD15__LD15		IOMUX_PAD(0x2fc, 0x104, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LD15__FEC_RX_CLK	IOMUX_PAD(0x2fc, 0x104, 0x15, 0x514, 1, NO_PAD_CTL)
+
+#define MX25_PAD_HSYNC__HSYNC		IOMUX_PAD(0x300, 0x108, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_HSYNC__GPIO_1_22	IOMUX_PAD(0x300, 0x108, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_VSYNC__VSYNC		IOMUX_PAD(0x304, 0x10c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_VSYNC__GPIO_1_23	IOMUX_PAD(0x304, 0x10c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_LSCLK__LSCLK		IOMUX_PAD(0x308, 0x110, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_LSCLK__GPIO_1_24	IOMUX_PAD(0x308, 0x110, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_OE_ACD__OE_ACD		IOMUX_PAD(0x30c, 0x114, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_OE_ACD__GPIO_1_25	IOMUX_PAD(0x30c, 0x114, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CONTRAST__CONTRAST	IOMUX_PAD(0x310, 0x118, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CONTRAST__FEC_CRS	IOMUX_PAD(0x310, 0x118, 0x15, 0x508, 1, NO_PAD_CTL)
+
+#define MX25_PAD_PWM__PWM		IOMUX_PAD(0x314, 0x11c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_PWM__GPIO_1_26		IOMUX_PAD(0x314, 0x11c, 0x15, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_PWM__USBH2_OC		IOMUX_PAD(0x314, 0x11c, 0x16, 0x580, 1, PAD_CTL_PUS_100K_UP)
+
+#define MX25_PAD_CSI_D2__CSI_D2		IOMUX_PAD(0x318, 0x120, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_D2__UART5_RXD_MUX	IOMUX_PAD(0x318, 0x120, 0x11, 0x578, 1, NO_PAD_CTRL)
+#define MX25_PAD_CSI_D2__GPIO_1_27	IOMUX_PAD(0x318, 0x120, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSI_D3__CSI_D3		IOMUX_PAD(0x31c, 0x124, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_D3__GPIO_1_28	IOMUX_PAD(0x31c, 0x124, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSI_D4__CSI_D4		IOMUX_PAD(0x320, 0x128, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_D4__UART5_RTS	IOMUX_PAD(0x320, 0x128, 0x11, 0x574, 1, NO_PAD_CTRL)
+#define MX25_PAD_CSI_D4__GPIO_1_29	IOMUX_PAD(0x320, 0x128, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSI_D5__CSI_D5		IOMUX_PAD(0x324, 0x12c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_D5__GPIO_1_30	IOMUX_PAD(0x324, 0x12c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSI_D6__CSI_D6		IOMUX_PAD(0x328, 0x130, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_D6__GPIO_1_31	IOMUX_PAD(0x328, 0x130, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSI_D7__CSI_D7		IOMUX_PAD(0x32c, 0x134, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_D7__GPIO_1_6	IOMUX_PAD(0x32c, 0x134, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSI_D8__CSI_D8		IOMUX_PAD(0x330, 0x138, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_D8__GPIO_1_7	IOMUX_PAD(0x330, 0x138, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSI_D9__CSI_D9		IOMUX_PAD(0x334, 0x13c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_D9__GPIO_4_21	IOMUX_PAD(0x334, 0x13c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSI_MCLK__CSI_MCLK	IOMUX_PAD(0x338, 0x140, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_MCLK__GPIO_1_8	IOMUX_PAD(0x338, 0x140, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSI_VSYNC__CSI_VSYNC	IOMUX_PAD(0x33c, 0x144, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_VSYNC__GPIO_1_9	IOMUX_PAD(0x33c, 0x144, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSI_HSYNC__CSI_HSYNC	IOMUX_PAD(0x340, 0x148, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_HSYNC__GPIO_1_10	IOMUX_PAD(0x340, 0x148, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSI_PIXCLK__CSI_PIXCLK	IOMUX_PAD(0x344, 0x14c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSI_PIXCLK__GPIO_1_11	IOMUX_PAD(0x344, 0x14c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_I2C1_CLK__I2C1_CLK	IOMUX_PAD(0x348, 0x150, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_I2C1_CLK__GPIO_1_12	IOMUX_PAD(0x348, 0x150, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_I2C1_DAT__I2C1_DAT	IOMUX_PAD(0x34c, 0x154, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_I2C1_DAT__GPIO_1_13	IOMUX_PAD(0x34c, 0x154, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSPI1_MOSI__CSPI1_MOSI	IOMUX_PAD(0x350, 0x158, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSPI1_MOSI__GPIO_1_14	IOMUX_PAD(0x350, 0x158, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSPI1_MISO__CSPI1_MISO	IOMUX_PAD(0x354, 0x15c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSPI1_MISO__GPIO_1_15	IOMUX_PAD(0x354, 0x15c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSPI1_SS0__CSPI1_SS0	IOMUX_PAD(0x358, 0x160, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSPI1_SS0__GPIO_1_16	IOMUX_PAD(0x358, 0x160, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSPI1_SS1__CSPI1_SS1	IOMUX_PAD(0x35c, 0x164, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSPI1_SS1__GPIO_1_17	IOMUX_PAD(0x35c, 0x164, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSPI1_SCLK__CSPI1_SCLK	IOMUX_PAD(0x360, 0x168, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CSPI1_SCLK__GPIO_1_18	IOMUX_PAD(0x360, 0x168, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CSPI1_RDY__CSPI1_RDY	IOMUX_PAD(0x364, 0x16c, 0x10, 0, 0, PAD_CTL_PKE)
+#define MX25_PAD_CSPI1_RDY__GPIO_2_22	IOMUX_PAD(0x364, 0x16c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_UART1_RXD__UART1_RXD	IOMUX_PAD(0x368, 0x170, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN)
+#define MX25_PAD_UART1_RXD__GPIO_4_22	IOMUX_PAD(0x368, 0x170, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_UART1_TXD__UART1_TXD	IOMUX_PAD(0x36c, 0x174, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_UART1_TXD__GPIO_4_23	IOMUX_PAD(0x36c, 0x174, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_UART1_RTS__UART1_RTS	IOMUX_PAD(0x370, 0x178, 0x10, 0, 0, PAD_CTL_PUS_100K_UP)
+#define MX25_PAD_UART1_RTS__CSI_D0	IOMUX_PAD(0x370, 0x178, 0x11, 0x488, 1, NO_PAD_CTRL)
+#define MX25_PAD_UART1_RTS__GPIO_4_24	IOMUX_PAD(0x370, 0x178, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_UART1_CTS__UART1_CTS	IOMUX_PAD(0x374, 0x17c, 0x10, 0, 0, PAD_CTL_PUS_100K_UP)
+#define MX25_PAD_UART1_CTS__CSI_D1	IOMUX_PAD(0x374, 0x17c, 0x11, 0x48c, 1, NO_PAD_CTRL)
+#define MX25_PAD_UART1_CTS__GPIO_4_25	IOMUX_PAD(0x374, 0x17c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_UART2_RXD__UART2_RXD	IOMUX_PAD(0x378, 0x180, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_UART2_RXD__GPIO_4_26	IOMUX_PAD(0x378, 0x180, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_UART2_TXD__UART2_TXD	IOMUX_PAD(0x37c, 0x184, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_UART2_TXD__GPIO_4_27	IOMUX_PAD(0x37c, 0x184, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_UART2_RTS__UART2_RTS	IOMUX_PAD(0x380, 0x188, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_UART2_RTS__FEC_COL	IOMUX_PAD(0x380, 0x188, 0x12, 0x504, 2, NO_PAD_CTL)
+#define MX25_PAD_UART2_RTS__GPIO_4_28	IOMUX_PAD(0x380, 0x188, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_UART2_CTS__FEC_RX_ER	IOMUX_PAD(0x384, 0x18c, 0x12, 0x518, 2, NO_PAD_CTL)
+#define MX25_PAD_UART2_CTS__UART2_CTS	IOMUX_PAD(0x384, 0x18c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_UART2_CTS__GPIO_4_29	IOMUX_PAD(0x384, 0x18c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_SD1_CMD__SD1_CMD	IOMUX_PAD(0x388, 0x190, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
+#define MX25_PAD_SD1_CMD__FEC_RDATA2	IOMUX_PAD(0x388, 0x190, 0x12, 0x50c, 2, NO_PAD_CTL)
+#define MX25_PAD_SD1_CMD__GPIO_2_23	IOMUX_PAD(0x388, 0x190, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_SD1_CLK__SD1_CLK	IOMUX_PAD(0x38c, 0x194, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
+#define MX25_PAD_SD1_CLK__FEC_RDATA3	IOMUX_PAD(0x38c, 0x194, 0x12, 0x510, 2, NO_PAD_CTL)
+#define MX25_PAD_SD1_CLK__GPIO_2_24	IOMUX_PAD(0x38c, 0x194, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_SD1_DATA0__SD1_DATA0	IOMUX_PAD(0x390, 0x198, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
+#define MX25_PAD_SD1_DATA0__GPIO_2_25	IOMUX_PAD(0x390, 0x198, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_SD1_DATA1__SD1_DATA1	IOMUX_PAD(0x394, 0x19c, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
+#define MX25_PAD_SD1_DATA1__AUD7_RXD	IOMUX_PAD(0x394, 0x19c, 0x13, 0x478, 0, NO_PAD_CTRL)
+#define MX25_PAD_SD1_DATA1__GPIO_2_26	IOMUX_PAD(0x394, 0x19c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_SD1_DATA2__SD1_DATA2	IOMUX_PAD(0x398, 0x1a0, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
+#define MX25_PAD_SD1_DATA2__FEC_RX_CLK	IOMUX_PAD(0x398, 0x1a0, 0x15, 0x514, 2, NO_PAD_CTL)
+#define MX25_PAD_SD1_DATA2__GPIO_2_27	IOMUX_PAD(0x398, 0x1a0, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_SD1_DATA3__SD1_DATA3	IOMUX_PAD(0x39c, 0x1a4, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
+#define MX25_PAD_SD1_DATA3__FEC_CRS	IOMUX_PAD(0x39c, 0x1a4, 0x10, 0x508, 2, NO_PAD_CTL)
+#define MX25_PAD_SD1_DATA3__GPIO_2_28	IOMUX_PAD(0x39c, 0x1a4, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_KPP_ROW0__KPP_ROW0	IOMUX_PAD(0x3a0, 0x1a8, 0x10, 0, 0, PAD_CTL_PKE)
+#define MX25_PAD_KPP_ROW0__GPIO_2_29	IOMUX_PAD(0x3a0, 0x1a8, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_KPP_ROW1__KPP_ROW1	IOMUX_PAD(0x3a4, 0x1ac, 0x10, 0, 0, PAD_CTL_PKE)
+#define MX25_PAD_KPP_ROW1__GPIO_2_30	IOMUX_PAD(0x3a4, 0x1ac, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_KPP_ROW2__KPP_ROW2	IOMUX_PAD(0x3a8, 0x1b0, 0x10, 0, 0, PAD_CTL_PKE)
+#define MX25_PAD_KPP_ROW2__CSI_D0	IOMUX_PAD(0x3a8, 0x1b0, 0x13, 0x488, 2, NO_PAD_CTRL)
+#define MX25_PAD_KPP_ROW2__GPIO_2_31	IOMUX_PAD(0x3a8, 0x1b0, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_KPP_ROW3__KPP_ROW3	IOMUX_PAD(0x3ac, 0x1b4, 0x10, 0, 0, PAD_CTL_PKE)
+#define MX25_PAD_KPP_ROW3__CSI_LD1	IOMUX_PAD(0x3ac, 0x1b4, 0x13, 0x48c, 2, NO_PAD_CTRL)
+#define MX25_PAD_KPP_ROW3__GPIO_3_0	IOMUX_PAD(0x3ac, 0x1b4, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_KPP_COL0__KPP_COL0	IOMUX_PAD(0x3b0, 0x1b8, 0x10, 0, 0, PAD_CTL_PKE | PAD_CTL_ODE)
+#define MX25_PAD_KPP_COL0__GPIO_3_1	IOMUX_PAD(0x3b0, 0x1b8, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_KPP_COL1__KPP_COL1	IOMUX_PAD(0x3b4, 0x1bc, 0x10, 0, 0, PAD_CTL_PKE | PAD_CTL_ODE)
+#define MX25_PAD_KPP_COL1__GPIO_3_2	IOMUX_PAD(0x3b4, 0x1bc, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_KPP_COL2__KPP_COL2	IOMUX_PAD(0x3b8, 0x1c0, 0x10, 0, 0, PAD_CTL_PKE | PAD_CTL_ODE)
+#define MX25_PAD_KPP_COL2__GPIO_3_3	IOMUX_PAD(0x3b8, 0x1c0, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_KPP_COL3__KPP_COL3	IOMUX_PAD(0x3bc, 0x1c4, 0x10, 0, 0, PAD_CTL_PKE | PAD_CTL_ODE)
+#define MX25_PAD_KPP_COL3__GPIO_3_4	IOMUX_PAD(0x3bc, 0x1c4, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_FEC_MDC__FEC_MDC	IOMUX_PAD(0x3c0, 0x1c8, 0x10, 0, 0, NO_PAD_CTL)
+#define MX25_PAD_FEC_MDC__AUD4_TXD	IOMUX_PAD(0x3c0, 0x1c8, 0x12, 0x464, 1, NO_PAD_CTRL)
+#define MX25_PAD_FEC_MDC__GPIO_3_5	IOMUX_PAD(0x3c0, 0x1c8, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_FEC_MDIO__FEC_MDIO	IOMUX_PAD(0x3c4, 0x1cc, 0x10, 0, 0, PAD_CTL_HYS | PAD_CTL_PUS_22K_UP)
+#define MX25_PAD_FEC_MDIO__AUD4_RXD	IOMUX_PAD(0x3c4, 0x1cc, 0x12, 0x460, 1, NO_PAD_CTRL)
+#define MX25_PAD_FEC_MDIO__GPIO_3_6	IOMUX_PAD(0x3c4, 0x1cc, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_FEC_TDATA0__FEC_TDATA0	IOMUX_PAD(0x3c8, 0x1d0, 0x10, 0, 0, NO_PAD_CTL)
+#define MX25_PAD_FEC_TDATA0__GPIO_3_7	IOMUX_PAD(0x3c8, 0x1d0, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_FEC_TDATA1__FEC_TDATA1	IOMUX_PAD(0x3cc, 0x1d4, 0x10, 0, 0, NO_PAD_CTL)
+#define MX25_PAD_FEC_TDATA1__AUD4_TXFS	IOMUX_PAD(0x3cc, 0x1d4, 0x12, 0x474, 1, NO_PAD_CTRL)
+#define MX25_PAD_FEC_TDATA1__GPIO_3_8	IOMUX_PAD(0x3cc, 0x1d4, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_FEC_TX_EN__FEC_TX_EN	IOMUX_PAD(0x3d0, 0x1d8, 0x10, 0, 0, NO_PAD_CTL)
+#define MX25_PAD_FEC_TX_EN__GPIO_3_9   	IOMUX_PAD(0x3d0, 0x1d8, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_FEC_RDATA0__FEC_RDATA0	IOMUX_PAD(0x3d4, 0x1dc, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTL)
+#define MX25_PAD_FEC_RDATA0__GPIO_3_10	IOMUX_PAD(0x3d4, 0x1dc, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_FEC_RDATA1__FEC_RDATA1	IOMUX_PAD(0x3d8, 0x1e0, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTL)
+#define MX25_PAD_FEC_RDATA1__GPIO_3_11	IOMUX_PAD(0x3d8, 0x1e0, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_FEC_RX_DV__FEC_RX_DV	IOMUX_PAD(0x3dc, 0x1e4, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTL)
+#define MX25_PAD_FEC_RX_DV__CAN2_RX	IOMUX_PAD(0x3dc, 0x1e4, 0x14, 0x484, 0, PAD_CTL_PUS_22K_UP)
+#define MX25_PAD_FEC_RX_DV__GPIO_3_12	IOMUX_PAD(0x3dc, 0x1e4, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_FEC_TX_CLK__FEC_TX_CLK	IOMUX_PAD(0x3e0, 0x1e8, 0x10, 0, 0, PAD_CTL_HYS | PAD_CTL_PUS_100K_DOWN)
+#define MX25_PAD_FEC_TX_CLK__GPIO_3_13	IOMUX_PAD(0x3e0, 0x1e8, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_RTCK__RTCK		IOMUX_PAD(0x3e4, 0x1ec, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_RTCK__OWIRE		IOMUX_PAD(0x3e4, 0x1ec, 0x11, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_RTCK__GPIO_3_14	IOMUX_PAD(0x3e4, 0x1ec, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_DE_B__DE_B		IOMUX_PAD(0x3ec, 0x1f0, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_DE_B__GPIO_2_20	IOMUX_PAD(0x3ec, 0x1f0, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_TDO__TDO		IOMUX_PAD(0x3e8, 0x000, 0x00, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_GPIO_A__GPIO_A		IOMUX_PAD(0x3f0, 0x1f4, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_GPIO_A__CAN1_TX	IOMUX_PAD(0x3f0, 0x1f4, 0x16, 0, 0, PAD_CTL_PUS_22K_UP)
+#define MX25_PAD_GPIO_A__USBOTG_PWR	IOMUX_PAD(0x3f0, 0x1f4, 0x12, 0, 0, PAD_CTL_PKE)
+
+#define MX25_PAD_GPIO_B__GPIO_B		IOMUX_PAD(0x3f4, 0x1f8, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_GPIO_B__CAN1_RX	IOMUX_PAD(0x3f4, 0x1f8, 0x16, 0x480, 1, PAD_CTL_PUS_22K)
+#define MX25_PAD_GPIO_B__USBOTG_OC	IOMUX_PAD(0x3f4, 0x1f8, 0x12, 0x57c, 1, PAD_CTL_PUS_100K_UP)
+
+#define MX25_PAD_GPIO_C__GPIO_C		IOMUX_PAD(0x3f8, 0x1fc, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_GPIO_C__CAN2_TX	IOMUX_PAD(0x3f8, 0x1fc, 0x16, 0, 0, PAD_CTL_PUS_22K_UP)
+
+#define MX25_PAD_GPIO_D__GPIO_D		IOMUX_PAD(0x3fc, 0x200, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_GPIO_D__CAN2_RX	IOMUX_PAD(0x3fc, 0x200, 0x16, 0x484, 1, PAD_CTL_PUS_22K_UP)
+
+#define MX25_PAD_GPIO_E__GPIO_E		IOMUX_PAD(0x400, 0x204, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_GPIO_E__AUD7_TXD	IOMUX_PAD(0x400, 0x204, 0x14, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_GPIO_F__GPIO_F		IOMUX_PAD(0x404, 0x208, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_GPIO_F__AUD7_TXC	IOMUX_PAD(0x404, 0x208, 0x14, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_EXT_ARMCLK__EXT_ARMCLK	IOMUX_PAD(0x000, 0x20c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_EXT_ARMCLK__GPIO_3_15	IOMUX_PAD(0x000, 0x20c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_UPLL_BYPCLK__UPLL_BYPCLK IOMUX_PAD(0x000, 0x210, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_UPLL_BYPCLK__GPIO_3_16	IOMUX_PAD(0x000, 0x210, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_VSTBY_REQ__VSTBY_REQ	IOMUX_PAD(0x408, 0x214, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_VSTBY_REQ__AUD7_TXFS	IOMUX_PAD(0x408, 0x214, 0x14, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_VSTBY_REQ__GPIO_3_17	IOMUX_PAD(0x408, 0x214, 0x15, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_VSTBY_ACK__VSTBY_ACK	IOMUX_PAD(0x40c, 0x218, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_VSTBY_ACK__GPIO_3_18	IOMUX_PAD(0x40c, 0x218, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_POWER_FAIL__POWER_FAIL	IOMUX_PAD(0x410, 0x21c, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_POWER_FAIL__AUD7_RXD	IOMUX_PAD(0x410, 0x21c, 0x14, 0x478, 1, NO_PAD_CTRL)
+#define MX25_PAD_POWER_FAIL__GPIO_3_19	IOMUX_PAD(0x410, 0x21c, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CLKO__CLKO		IOMUX_PAD(0x414, 0x220, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CLKO__GPIO_2_21	IOMUX_PAD(0x414, 0x220, 0x15, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_BOOT_MODE0__BOOT_MODE0	IOMUX_PAD(0x000, 0x224, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_BOOT_MODE0__GPIO_4_30	IOMUX_PAD(0x000, 0x224, 0x05, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_BOOT_MODE1__BOOT_MODE1	IOMUX_PAD(0x000, 0x228, 0x00, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_BOOT_MODE1__GPIO_4_31	IOMUX_PAD(0x000, 0x228, 0x05, 0, 0, NO_PAD_CTRL)
+
+#define MX25_PAD_CTL_GRP_DVS_MISC	IOMUX_PAD(0x418, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DSE_FEC	IOMUX_PAD(0x41c, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DVS_JTAG	IOMUX_PAD(0x420, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DSE_NFC	IOMUX_PAD(0x424, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DSE_CSI	IOMUX_PAD(0x428, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DSE_WEIM	IOMUX_PAD(0x42c, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DSE_DDR	IOMUX_PAD(0x430, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DVS_CRM	IOMUX_PAD(0x434, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DSE_KPP	IOMUX_PAD(0x438, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DSE_SDHC1	IOMUX_PAD(0x43c, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DSE_LCD	IOMUX_PAD(0x440, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DSE_UART	IOMUX_PAD(0x444, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DVS_NFC	IOMUX_PAD(0x448, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DVS_CSI	IOMUX_PAD(0x44c, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DSE_CSPI1	IOMUX_PAD(0x450, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DDRTYPE	IOMUX_PAD(0x454, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DVS_SDHC1	IOMUX_PAD(0x458, 0x000, 0, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CTL_GRP_DVS_LCD	IOMUX_PAD(0x45c, 0x000, 0, 0, 0, NO_PAD_CTRL)
+
+#endif // __ASSEMBLY__
+#endif // __IOMUX_MX25_H__
diff --git a/arch/arm/plat-mxc/include/mach/iomux.h b/arch/arm/plat-mxc/include/mach/iomux.h
index 171f8adc110..6d49f8ae325 100644
--- a/arch/arm/plat-mxc/include/mach/iomux.h
+++ b/arch/arm/plat-mxc/include/mach/iomux.h
@@ -49,6 +49,9 @@
 #ifdef CONFIG_ARCH_MX2
 # define GPIO_PORT_MAX  5
 #endif
+#ifdef CONFIG_ARCH_MX25
+# define GPIO_PORT_MAX  3
+#endif
 
 #ifndef GPIO_PORT_MAX
 # error "GPIO config port count unknown!"
@@ -107,6 +110,9 @@
 #include <mach/iomux-mx27.h>
 #endif
 #endif
+#ifdef CONFIG_ARCH_MX25
+#include <mach/iomux-mx25.h>
+#endif
 
 
 /* decode irq number to use with IMR(x), ISR(x) and friends */
-- 
cgit v1.2.3


From fd6ac7bb9d671d36fd7536c68fde977d197756ab Mon Sep 17 00:00:00 2001
From: Dmitriy Taychenachev <dimichxp@gmail.com>
Date: Fri, 31 Jul 2009 20:29:22 +0900
Subject: MXC: add basic MXC91231 support

Signed-off-by: Dmitriy Taychenachev <dimichxp@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/Makefile                            |   1 +
 arch/arm/mach-mxc91231/Kconfig               |  11 +
 arch/arm/mach-mxc91231/Makefile              |   2 +
 arch/arm/mach-mxc91231/Makefile.boot         |   3 +
 arch/arm/mach-mxc91231/clock.c               | 642 +++++++++++++++++++++++++++
 arch/arm/mach-mxc91231/crm_regs.h            | 399 +++++++++++++++++
 arch/arm/mach-mxc91231/devices.c             | 251 +++++++++++
 arch/arm/mach-mxc91231/devices.h             |  13 +
 arch/arm/mach-mxc91231/magx-zn5.c            |  59 +++
 arch/arm/mach-mxc91231/mm.c                  |  94 ++++
 arch/arm/mach-mxc91231/system.c              |  51 +++
 arch/arm/plat-mxc/Kconfig                    |   8 +
 arch/arm/plat-mxc/include/mach/common.h      |   6 +
 arch/arm/plat-mxc/include/mach/debug-macro.S |   8 +
 arch/arm/plat-mxc/include/mach/hardware.h    |   4 +
 arch/arm/plat-mxc/include/mach/irqs.h        |   2 +
 arch/arm/plat-mxc/include/mach/memory.h      |   2 +
 arch/arm/plat-mxc/include/mach/mxc.h         |  15 +-
 arch/arm/plat-mxc/include/mach/mxc91231.h    | 315 +++++++++++++
 arch/arm/plat-mxc/include/mach/system.h      |  10 +
 arch/arm/plat-mxc/include/mach/timex.h       |   2 +
 arch/arm/plat-mxc/include/mach/uncompress.h  |   4 +
 arch/arm/plat-mxc/system.c                   |   7 +
 arch/arm/plat-mxc/time.c                     |   2 +-
 24 files changed, 1909 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm/mach-mxc91231/Kconfig
 create mode 100644 arch/arm/mach-mxc91231/Makefile
 create mode 100644 arch/arm/mach-mxc91231/Makefile.boot
 create mode 100644 arch/arm/mach-mxc91231/clock.c
 create mode 100644 arch/arm/mach-mxc91231/crm_regs.h
 create mode 100644 arch/arm/mach-mxc91231/devices.c
 create mode 100644 arch/arm/mach-mxc91231/devices.h
 create mode 100644 arch/arm/mach-mxc91231/magx-zn5.c
 create mode 100644 arch/arm/mach-mxc91231/mm.c
 create mode 100644 arch/arm/mach-mxc91231/system.c
 create mode 100644 arch/arm/plat-mxc/include/mach/mxc91231.h

(limited to 'arch')

diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 95ba3c5ca14..c1d60038328 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -159,6 +159,7 @@ machine-$(CONFIG_ARCH_U300)		:= u300
 machine-$(CONFIG_ARCH_VERSATILE)	:= versatile
 machine-$(CONFIG_ARCH_W90X900)		:= w90x900
 machine-$(CONFIG_FOOTBRIDGE)		:= footbridge
+machine-$(CONFIG_ARCH_MXC91231)		:= mxc91231
 
 # Platform directory name.  This list is sorted alphanumerically
 # by CONFIG_* macro name.
diff --git a/arch/arm/mach-mxc91231/Kconfig b/arch/arm/mach-mxc91231/Kconfig
new file mode 100644
index 00000000000..8e5fa38ebb6
--- /dev/null
+++ b/arch/arm/mach-mxc91231/Kconfig
@@ -0,0 +1,11 @@
+if ARCH_MXC91231
+
+comment "MXC91231 platforms:"
+
+config MACH_MAGX_ZN5
+	bool "Support Motorola Zn5 GSM phone"
+	default n
+	help
+	  Include support for Motorola Zn5 GSM phone.
+
+endif
diff --git a/arch/arm/mach-mxc91231/Makefile b/arch/arm/mach-mxc91231/Makefile
new file mode 100644
index 00000000000..eb70b669c55
--- /dev/null
+++ b/arch/arm/mach-mxc91231/Makefile
@@ -0,0 +1,2 @@
+obj-y	:= mm.o clock.o devices.o system.o
+obj-$(CONFIG_MACH_MAGX_ZN5) += magx-zn5.o
diff --git a/arch/arm/mach-mxc91231/Makefile.boot b/arch/arm/mach-mxc91231/Makefile.boot
new file mode 100644
index 00000000000..9939a19d99a
--- /dev/null
+++ b/arch/arm/mach-mxc91231/Makefile.boot
@@ -0,0 +1,3 @@
+   zreladdr-y	:= 0x90008000
+params_phys-y	:= 0x90000100
+initrd_phys-y	:= 0x90800000
diff --git a/arch/arm/mach-mxc91231/clock.c b/arch/arm/mach-mxc91231/clock.c
new file mode 100644
index 00000000000..ecfa37fef8a
--- /dev/null
+++ b/arch/arm/mach-mxc91231/clock.c
@@ -0,0 +1,642 @@
+#include <linux/clk.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+
+#include <mach/clock.h>
+#include <mach/hardware.h>
+#include <mach/common.h>
+
+#include <asm/clkdev.h>
+#include <asm/bug.h>
+#include <asm/div64.h>
+
+#include "crm_regs.h"
+
+#define CRM_SMALL_DIVIDER(base, name) \
+	crm_small_divider(base, \
+			  base ## _ ## name ## _OFFSET, \
+			  base ## _ ## name ## _MASK)
+#define CRM_1DIVIDER(base, name) \
+	crm_divider(base, \
+		    base ## _ ## name ## _OFFSET, \
+		    base ## _ ## name ## _MASK, 1)
+#define CRM_16DIVIDER(base, name) \
+	crm_divider(base, \
+		    base ## _ ## name ## _OFFSET, \
+		    base ## _ ## name ## _MASK, 16)
+
+static u32 crm_small_divider(void __iomem *reg, u8 offset, u32 mask)
+{
+	static const u32 crm_small_dividers[] = {
+		2, 3, 4, 5, 6, 8, 10, 12
+	};
+	u8 idx;
+
+	idx = (__raw_readl(reg) & mask) >> offset;
+	if (idx > 7)
+		return 1;
+
+	return crm_small_dividers[idx];
+}
+
+static u32 crm_divider(void __iomem *reg, u8 offset, u32 mask, u32 z)
+{
+	u32 div;
+	div = (__raw_readl(reg) & mask) >> offset;
+	return div ? div : z;
+}
+
+static int _clk_1bit_enable(struct clk *clk)
+{
+	u32 reg;
+
+	reg = __raw_readl(clk->enable_reg);
+	reg |= 1 << clk->enable_shift;
+	__raw_writel(reg, clk->enable_reg);
+
+	return 0;
+}
+
+static void _clk_1bit_disable(struct clk *clk)
+{
+	u32 reg;
+
+	reg = __raw_readl(clk->enable_reg);
+	reg &= ~(1 << clk->enable_shift);
+	__raw_writel(reg, clk->enable_reg);
+}
+
+static int _clk_3bit_enable(struct clk *clk)
+{
+	u32 reg;
+
+	reg = __raw_readl(clk->enable_reg);
+	reg |= 0x7 << clk->enable_shift;
+	__raw_writel(reg, clk->enable_reg);
+
+	return 0;
+}
+
+static void _clk_3bit_disable(struct clk *clk)
+{
+	u32 reg;
+
+	reg = __raw_readl(clk->enable_reg);
+	reg &= ~(0x7 << clk->enable_shift);
+	__raw_writel(reg, clk->enable_reg);
+}
+
+static unsigned long ckih_rate;
+
+static unsigned long clk_ckih_get_rate(struct clk *clk)
+{
+	return ckih_rate;
+}
+
+static struct clk ckih_clk = {
+	.get_rate = clk_ckih_get_rate,
+};
+
+static unsigned long clk_ckih_x2_get_rate(struct clk *clk)
+{
+	return 2 * clk_get_rate(clk->parent);
+}
+
+static struct clk ckih_x2_clk = {
+	.parent = &ckih_clk,
+	.get_rate = clk_ckih_x2_get_rate,
+};
+
+static unsigned long clk_ckil_get_rate(struct clk *clk)
+{
+	return CKIL_CLK_FREQ;
+}
+
+static struct clk ckil_clk = {
+	.get_rate = clk_ckil_get_rate,
+};
+
+/* plls stuff */
+static struct clk mcu_pll_clk;
+static struct clk dsp_pll_clk;
+static struct clk usb_pll_clk;
+
+static struct clk *pll_clk(u8 sel)
+{
+	switch (sel) {
+	case 0:
+		return &mcu_pll_clk;
+	case 1:
+		return &dsp_pll_clk;
+	case 2:
+		return &usb_pll_clk;
+	}
+	BUG();
+}
+
+static void __iomem *pll_base(struct clk *clk)
+{
+	if (clk == &mcu_pll_clk)
+		return MXC_PLL0_BASE;
+	else if (clk == &dsp_pll_clk)
+		return MXC_PLL1_BASE;
+	else if (clk == &usb_pll_clk)
+		return MXC_PLL2_BASE;
+	BUG();
+}
+
+static unsigned long clk_pll_get_rate(struct clk *clk)
+{
+	const void __iomem *pllbase;
+	unsigned long dp_op, dp_mfd, dp_mfn, pll_hfsm, ref_clk, mfi;
+	long mfn, mfn_abs, mfd, pdf;
+	s64 temp;
+	pllbase = pll_base(clk);
+
+	pll_hfsm = __raw_readl(pllbase + MXC_PLL_DP_CTL) & MXC_PLL_DP_CTL_HFSM;
+	if (pll_hfsm == 0) {
+		dp_op = __raw_readl(pllbase + MXC_PLL_DP_OP);
+		dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_MFD);
+		dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_MFN);
+	} else {
+		dp_op = __raw_readl(pllbase + MXC_PLL_DP_HFS_OP);
+		dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFD);
+		dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFN);
+	}
+
+	pdf = dp_op & MXC_PLL_DP_OP_PDF_MASK;
+	mfi = (dp_op >> MXC_PLL_DP_OP_MFI_OFFSET) & MXC_PLL_DP_OP_PDF_MASK;
+	mfi = (mfi <= 5) ? 5 : mfi;
+	mfd = dp_mfd & MXC_PLL_DP_MFD_MASK;
+	mfn = dp_mfn & MXC_PLL_DP_MFN_MASK;
+	mfn = (mfn <= 0x4000000) ? mfn : (mfn - 0x10000000);
+
+	if (mfn < 0)
+		mfn_abs = -mfn;
+	else
+		mfn_abs = mfn;
+
+/* XXX: actually this asumes that ckih is fed to pll, but spec says
+ * that ckih_x2 is also possible. need to check this out.
+ */
+	ref_clk = clk_get_rate(&ckih_clk);
+
+	ref_clk *= 2;
+	ref_clk /= pdf + 1;
+
+	temp = (u64) ref_clk * mfn_abs;
+	do_div(temp, mfd);
+	if (mfn < 0)
+		temp = -temp;
+	temp += ref_clk * mfi;
+
+	return temp;
+}
+
+static int clk_pll_enable(struct clk *clk)
+{
+	void __iomem *ctl;
+	u32 reg;
+
+	ctl = pll_base(clk);
+	reg = __raw_readl(ctl);
+	reg |= (MXC_PLL_DP_CTL_RST | MXC_PLL_DP_CTL_UPEN);
+	__raw_writel(reg, ctl);
+	do {
+		reg = __raw_readl(ctl);
+	} while ((reg & MXC_PLL_DP_CTL_LRF) != MXC_PLL_DP_CTL_LRF);
+	return 0;
+}
+
+static void clk_pll_disable(struct clk *clk)
+{
+	void __iomem *ctl;
+	u32 reg;
+
+	ctl = pll_base(clk);
+	reg = __raw_readl(ctl);
+	reg &= ~(MXC_PLL_DP_CTL_RST | MXC_PLL_DP_CTL_UPEN);
+	__raw_writel(reg, ctl);
+}
+
+static struct clk mcu_pll_clk = {
+	.parent = &ckih_clk,
+	.get_rate = clk_pll_get_rate,
+	.enable = clk_pll_enable,
+	.disable = clk_pll_disable,
+};
+
+static struct clk dsp_pll_clk = {
+	.parent = &ckih_clk,
+	.get_rate = clk_pll_get_rate,
+	.enable = clk_pll_enable,
+	.disable = clk_pll_disable,
+};
+
+static struct clk usb_pll_clk = {
+	.parent = &ckih_clk,
+	.get_rate = clk_pll_get_rate,
+	.enable = clk_pll_enable,
+	.disable = clk_pll_disable,
+};
+/* plls stuff end */
+
+/* ap_ref_clk stuff */
+static struct clk ap_ref_clk;
+
+static unsigned long clk_ap_ref_get_rate(struct clk *clk)
+{
+	u32 ascsr, acsr;
+	u8 ap_pat_ref_div_2, ap_isel, acs, ads;
+
+	ascsr = __raw_readl(MXC_CRMAP_ASCSR);
+	acsr = __raw_readl(MXC_CRMAP_ACSR);
+
+	/* 0 for ckih, 1 for ckih*2 */
+	ap_isel = ascsr & MXC_CRMAP_ASCSR_APISEL;
+	/* reg divider */
+	ap_pat_ref_div_2 = (ascsr >> MXC_CRMAP_ASCSR_AP_PATDIV2_OFFSET) & 0x1;
+	/* undocumented, 1 for disabling divider */
+	ads = (acsr >> MXC_CRMAP_ACSR_ADS_OFFSET) & 0x1;
+	/* 0 for pat_ref, 1 for divider out */
+	acs = acsr & MXC_CRMAP_ACSR_ACS;
+
+	if (acs & !ads)
+		/* use divided clock */
+		return clk_get_rate(clk->parent) / (ap_pat_ref_div_2 ? 2 : 1);
+
+	return clk_get_rate(clk->parent) * (ap_isel ? 2 : 1);
+}
+
+static struct clk ap_ref_clk = {
+	.parent = &ckih_clk,
+	.get_rate = clk_ap_ref_get_rate,
+};
+/* ap_ref_clk stuff end */
+
+/* ap_pre_dfs_clk stuff */
+static struct clk ap_pre_dfs_clk;
+
+static unsigned long clk_ap_pre_dfs_get_rate(struct clk *clk)
+{
+	u32 acsr, ascsr;
+
+	acsr = __raw_readl(MXC_CRMAP_ACSR);
+	ascsr = __raw_readl(MXC_CRMAP_ASCSR);
+
+	if (acsr & MXC_CRMAP_ACSR_ACS) {
+		u8 sel;
+		sel = (ascsr & MXC_CRMAP_ASCSR_APSEL_MASK) >>
+			MXC_CRMAP_ASCSR_APSEL_OFFSET;
+		return clk_get_rate(pll_clk(sel)) /
+			CRM_SMALL_DIVIDER(MXC_CRMAP_ACDR, ARMDIV);
+	}
+	return clk_get_rate(&ap_ref_clk);
+}
+
+static struct clk ap_pre_dfs_clk = {
+	.get_rate = clk_ap_pre_dfs_get_rate,
+};
+/* ap_pre_dfs_clk stuff end */
+
+/* usb_clk stuff */
+static struct clk usb_clk;
+
+static struct clk *clk_usb_parent(struct clk *clk)
+{
+	u32 acsr, ascsr;
+
+	acsr = __raw_readl(MXC_CRMAP_ACSR);
+	ascsr = __raw_readl(MXC_CRMAP_ASCSR);
+
+	if (acsr & MXC_CRMAP_ACSR_ACS) {
+		u8 sel;
+		sel = (ascsr & MXC_CRMAP_ASCSR_USBSEL_MASK) >>
+			MXC_CRMAP_ASCSR_USBSEL_OFFSET;
+		return pll_clk(sel);
+	}
+	return &ap_ref_clk;
+}
+
+static unsigned long clk_usb_get_rate(struct clk *clk)
+{
+	return clk_get_rate(clk->parent) /
+		CRM_SMALL_DIVIDER(MXC_CRMAP_ACDER2, USBDIV);
+}
+
+static struct clk usb_clk = {
+	.enable_reg = MXC_CRMAP_ACDER2,
+	.enable_shift = MXC_CRMAP_ACDER2_USBEN_OFFSET,
+	.get_rate = clk_usb_get_rate,
+	.enable = _clk_1bit_enable,
+	.disable = _clk_1bit_disable,
+};
+/* usb_clk stuff end */
+
+static unsigned long clk_ipg_get_rate(struct clk *clk)
+{
+	return clk_get_rate(clk->parent) / CRM_16DIVIDER(MXC_CRMAP_ACDR, IPDIV);
+}
+
+static unsigned long clk_ahb_get_rate(struct clk *clk)
+{
+	return clk_get_rate(clk->parent) /
+		CRM_16DIVIDER(MXC_CRMAP_ACDR, AHBDIV);
+}
+
+static struct clk ipg_clk = {
+	.parent = &ap_pre_dfs_clk,
+	.get_rate = clk_ipg_get_rate,
+};
+
+static struct clk ahb_clk = {
+	.parent = &ap_pre_dfs_clk,
+	.get_rate = clk_ahb_get_rate,
+};
+
+/* perclk_clk stuff */
+static struct clk perclk_clk;
+
+static unsigned long clk_perclk_get_rate(struct clk *clk)
+{
+	u32 acder2;
+
+	acder2 = __raw_readl(MXC_CRMAP_ACDER2);
+	if (acder2 & MXC_CRMAP_ACDER2_BAUD_ISEL_MASK)
+		return 2 * clk_get_rate(clk->parent);
+
+	return clk_get_rate(clk->parent);
+}
+
+static struct clk perclk_clk = {
+	.parent = &ckih_clk,
+	.get_rate = clk_perclk_get_rate,
+};
+/* perclk_clk stuff end */
+
+/* uart_clk stuff */
+static struct clk uart_clk[];
+
+static unsigned long clk_uart_get_rate(struct clk *clk)
+{
+	u32 div;
+
+	switch (clk->id) {
+	case 0:
+	case 1:
+		div = CRM_SMALL_DIVIDER(MXC_CRMAP_ACDER2, BAUDDIV);
+		break;
+	case 2:
+		div = CRM_SMALL_DIVIDER(MXC_CRMAP_APRA, UART3DIV);
+		break;
+	default:
+		BUG();
+	}
+	return clk_get_rate(clk->parent) / div;
+}
+
+static struct clk uart_clk[] = {
+	{
+		.id = 0,
+		.parent = &perclk_clk,
+		.enable_reg = MXC_CRMAP_APRA,
+		.enable_shift = MXC_CRMAP_APRA_UART1EN_OFFSET,
+		.get_rate = clk_uart_get_rate,
+		.enable = _clk_1bit_enable,
+		.disable = _clk_1bit_disable,
+	}, {
+		.id = 1,
+		.parent = &perclk_clk,
+		.enable_reg = MXC_CRMAP_APRA,
+		.enable_shift = MXC_CRMAP_APRA_UART2EN_OFFSET,
+		.get_rate = clk_uart_get_rate,
+		.enable = _clk_1bit_enable,
+		.disable = _clk_1bit_disable,
+	}, {
+		.id = 2,
+		.parent = &perclk_clk,
+		.enable_reg = MXC_CRMAP_APRA,
+		.enable_shift = MXC_CRMAP_APRA_UART3EN_OFFSET,
+		.get_rate = clk_uart_get_rate,
+		.enable = _clk_1bit_enable,
+		.disable = _clk_1bit_disable,
+	},
+};
+/* uart_clk stuff end */
+
+/* sdhc_clk stuff */
+static struct clk nfc_clk;
+
+static unsigned long clk_nfc_get_rate(struct clk *clk)
+{
+	return clk_get_rate(clk->parent) /
+		CRM_1DIVIDER(MXC_CRMAP_ACDER2, NFCDIV);
+}
+
+static struct clk nfc_clk = {
+	.parent = &ahb_clk,
+	.enable_reg = MXC_CRMAP_ACDER2,
+	.enable_shift = MXC_CRMAP_ACDER2_NFCEN_OFFSET,
+	.get_rate = clk_nfc_get_rate,
+	.enable = _clk_1bit_enable,
+	.disable = _clk_1bit_disable,
+};
+/* sdhc_clk stuff end */
+
+/* sdhc_clk stuff */
+static struct clk sdhc_clk[];
+
+static struct clk *clk_sdhc_parent(struct clk *clk)
+{
+	u32 aprb;
+	u8 sel;
+	u32 mask;
+	int offset;
+
+	aprb = __raw_readl(MXC_CRMAP_APRB);
+
+	switch (clk->id) {
+	case 0:
+		mask = MXC_CRMAP_APRB_SDHC1_ISEL_MASK;
+		offset = MXC_CRMAP_APRB_SDHC1_ISEL_OFFSET;
+		break;
+	case 1:
+		mask = MXC_CRMAP_APRB_SDHC2_ISEL_MASK;
+		offset = MXC_CRMAP_APRB_SDHC2_ISEL_OFFSET;
+		break;
+	default:
+		BUG();
+	}
+	sel = (aprb & mask) >> offset;
+
+	switch (sel) {
+	case 0:
+		return &ckih_clk;
+	case 1:
+		return &ckih_x2_clk;
+	}
+	return &usb_clk;
+}
+
+static unsigned long clk_sdhc_get_rate(struct clk *clk)
+{
+	u32 div;
+
+	switch (clk->id) {
+	case 0:
+		div = CRM_SMALL_DIVIDER(MXC_CRMAP_APRB, SDHC1_DIV);
+		break;
+	case 1:
+		div = CRM_SMALL_DIVIDER(MXC_CRMAP_APRB, SDHC2_DIV);
+		break;
+	default:
+		BUG();
+	}
+
+	return clk_get_rate(clk->parent) / div;
+}
+
+static int clk_sdhc_enable(struct clk *clk)
+{
+	u32 amlpmre1, aprb;
+
+	amlpmre1 = __raw_readl(MXC_CRMAP_AMLPMRE1);
+	aprb = __raw_readl(MXC_CRMAP_APRB);
+	switch (clk->id) {
+	case 0:
+		amlpmre1 |= (0x7 << MXC_CRMAP_AMLPMRE1_MLPME4_OFFSET);
+		aprb |= (0x1 << MXC_CRMAP_APRB_SDHC1EN_OFFSET);
+		break;
+	case 1:
+		amlpmre1 |= (0x7 << MXC_CRMAP_AMLPMRE1_MLPME5_OFFSET);
+		aprb |= (0x1 << MXC_CRMAP_APRB_SDHC2EN_OFFSET);
+		break;
+	}
+	__raw_writel(amlpmre1, MXC_CRMAP_AMLPMRE1);
+	__raw_writel(aprb, MXC_CRMAP_APRB);
+	return 0;
+}
+
+static void clk_sdhc_disable(struct clk *clk)
+{
+	u32 amlpmre1, aprb;
+
+	amlpmre1 = __raw_readl(MXC_CRMAP_AMLPMRE1);
+	aprb = __raw_readl(MXC_CRMAP_APRB);
+	switch (clk->id) {
+	case 0:
+		amlpmre1 &= ~(0x7 << MXC_CRMAP_AMLPMRE1_MLPME4_OFFSET);
+		aprb &= ~(0x1 << MXC_CRMAP_APRB_SDHC1EN_OFFSET);
+		break;
+	case 1:
+		amlpmre1 &= ~(0x7 << MXC_CRMAP_AMLPMRE1_MLPME5_OFFSET);
+		aprb &= ~(0x1 << MXC_CRMAP_APRB_SDHC2EN_OFFSET);
+		break;
+	}
+	__raw_writel(amlpmre1, MXC_CRMAP_AMLPMRE1);
+	__raw_writel(aprb, MXC_CRMAP_APRB);
+}
+
+static struct clk sdhc_clk[] = {
+	{
+		.id = 0,
+		.get_rate = clk_sdhc_get_rate,
+		.enable = clk_sdhc_enable,
+		.disable = clk_sdhc_disable,
+	}, {
+		.id = 1,
+		.get_rate = clk_sdhc_get_rate,
+		.enable = clk_sdhc_enable,
+		.disable = clk_sdhc_disable,
+	},
+};
+/* sdhc_clk stuff end */
+
+/* wdog_clk stuff */
+static struct clk wdog_clk[] = {
+	{
+		.id = 0,
+		.parent = &ipg_clk,
+		.enable_reg = MXC_CRMAP_AMLPMRD,
+		.enable_shift = MXC_CRMAP_AMLPMRD_MLPMD7_OFFSET,
+		.enable = _clk_3bit_enable,
+		.disable = _clk_3bit_disable,
+	}, {
+		.id = 1,
+		.parent = &ipg_clk,
+		.enable_reg = MXC_CRMAP_AMLPMRD,
+		.enable_shift = MXC_CRMAP_AMLPMRD_MLPMD3_OFFSET,
+		.enable = _clk_3bit_enable,
+		.disable = _clk_3bit_disable,
+	},
+};
+/* wdog_clk stuff end */
+
+/* gpt_clk stuff */
+static struct clk gpt_clk = {
+	.parent = &ipg_clk,
+	.enable_reg = MXC_CRMAP_AMLPMRC,
+	.enable_shift = MXC_CRMAP_AMLPMRC_MLPMC4_OFFSET,
+	.enable = _clk_3bit_enable,
+	.disable = _clk_3bit_disable,
+};
+/* gpt_clk stuff end */
+
+/* cspi_clk stuff */
+static struct clk cspi_clk[] = {
+	{
+		.id = 0,
+		.parent = &ipg_clk,
+		.enable_reg = MXC_CRMAP_AMLPMRE2,
+		.enable_shift = MXC_CRMAP_AMLPMRE2_MLPME0_OFFSET,
+		.enable = _clk_3bit_enable,
+		.disable = _clk_3bit_disable,
+	}, {
+		.id = 1,
+		.parent = &ipg_clk,
+		.enable_reg = MXC_CRMAP_AMLPMRE1,
+		.enable_shift = MXC_CRMAP_AMLPMRE1_MLPME6_OFFSET,
+		.enable = _clk_3bit_enable,
+		.disable = _clk_3bit_disable,
+	},
+};
+/* cspi_clk stuff end */
+
+#define _REGISTER_CLOCK(d, n, c) \
+	{ \
+		.dev_id = d, \
+		.con_id = n, \
+		.clk = &c, \
+	},
+
+static struct clk_lookup lookups[] = {
+	_REGISTER_CLOCK("imx-uart.0", NULL, uart_clk[0])
+	_REGISTER_CLOCK("imx-uart.1", NULL, uart_clk[1])
+	_REGISTER_CLOCK("imx-uart.2", NULL, uart_clk[2])
+	_REGISTER_CLOCK("mxc-mmc.0", NULL, sdhc_clk[0])
+	_REGISTER_CLOCK("mxc-mmc.1", NULL, sdhc_clk[1])
+	_REGISTER_CLOCK("mxc-wdt.0", NULL, wdog_clk[0])
+	_REGISTER_CLOCK("spi_imx.0", NULL, cspi_clk[0])
+	_REGISTER_CLOCK("spi_imx.1", NULL, cspi_clk[1])
+};
+
+int __init mxc91231_clocks_init(unsigned long fref)
+{
+	void __iomem *gpt_base;
+	int i;
+
+	ckih_rate = fref;
+
+	usb_clk.parent = clk_usb_parent(&usb_clk);
+	sdhc_clk[0].parent = clk_sdhc_parent(&sdhc_clk[0]);
+	sdhc_clk[1].parent = clk_sdhc_parent(&sdhc_clk[1]);
+
+	for (i = 0; i < ARRAY_SIZE(lookups); i++)
+		clkdev_add(&lookups[i]);
+
+	gpt_base = MXC91231_IO_ADDRESS(MXC91231_GPT1_BASE_ADDR);
+	mxc_timer_init(&gpt_clk, gpt_base, MXC91231_INT_GPT);
+
+	return 0;
+}
diff --git a/arch/arm/mach-mxc91231/crm_regs.h b/arch/arm/mach-mxc91231/crm_regs.h
new file mode 100644
index 00000000000..ce4f5905818
--- /dev/null
+++ b/arch/arm/mach-mxc91231/crm_regs.h
@@ -0,0 +1,399 @@
+/*
+ * Copyright 2006 Freescale Semiconductor, Inc.
+ * Copyright 2006-2007 Motorola, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#ifndef _ARCH_ARM_MACH_MXC91231_CRM_REGS_H_
+#define _ARCH_ARM_MACH_MXC91231_CRM_REGS_H_
+
+#define CKIL_CLK_FREQ			32768
+
+#define MXC_CRM_AP_BASE			MXC91231_IO_ADDRESS(MXC91231_CRM_AP_BASE_ADDR)
+#define MXC_CRM_COM_BASE		MXC91231_IO_ADDRESS(MXC91231_CRM_COM_BASE_ADDR)
+#define MXC_DSM_BASE			MXC91231_IO_ADDRESS(MXC91231_DSM_BASE_ADDR)
+#define MXC_PLL0_BASE			MXC91231_IO_ADDRESS(MXC91231_PLL0_BASE_ADDR)
+#define MXC_PLL1_BASE			MXC91231_IO_ADDRESS(MXC91231_PLL1_BASE_ADDR)
+#define MXC_PLL2_BASE			MXC91231_IO_ADDRESS(MXC91231_PLL2_BASE_ADDR)
+#define MXC_CLKCTL_BASE			MXC91231_IO_ADDRESS(MXC91231_CLKCTL_BASE_ADDR)
+
+/* PLL Register Offsets */
+#define MXC_PLL_DP_CTL			0x00
+#define MXC_PLL_DP_CONFIG		0x04
+#define MXC_PLL_DP_OP			0x08
+#define MXC_PLL_DP_MFD			0x0C
+#define MXC_PLL_DP_MFN			0x10
+#define MXC_PLL_DP_HFS_OP		0x1C
+#define MXC_PLL_DP_HFS_MFD		0x20
+#define MXC_PLL_DP_HFS_MFN		0x24
+
+/* PLL Register Bit definitions */
+#define MXC_PLL_DP_CTL_DPDCK0_2_EN	0x1000
+#define MXC_PLL_DP_CTL_ADE		0x800
+#define MXC_PLL_DP_CTL_REF_CLK_DIV	0x400
+#define MXC_PLL_DP_CTL_HFSM		0x80
+#define MXC_PLL_DP_CTL_PRE		0x40
+#define MXC_PLL_DP_CTL_UPEN		0x20
+#define MXC_PLL_DP_CTL_RST		0x10
+#define MXC_PLL_DP_CTL_RCP		0x8
+#define MXC_PLL_DP_CTL_PLM		0x4
+#define MXC_PLL_DP_CTL_BRM0		0x2
+#define MXC_PLL_DP_CTL_LRF		0x1
+
+#define MXC_PLL_DP_OP_MFI_OFFSET	4
+#define MXC_PLL_DP_OP_MFI_MASK		0xF
+#define MXC_PLL_DP_OP_PDF_OFFSET	0
+#define MXC_PLL_DP_OP_PDF_MASK		0xF
+
+#define MXC_PLL_DP_MFD_OFFSET		0
+#define MXC_PLL_DP_MFD_MASK		0x7FFFFFF
+
+#define MXC_PLL_DP_MFN_OFFSET		0
+#define MXC_PLL_DP_MFN_MASK		0x7FFFFFF
+
+/* CRM AP Register Offsets */
+#define MXC_CRMAP_ASCSR			(MXC_CRM_AP_BASE + 0x00)
+#define MXC_CRMAP_ACDR			(MXC_CRM_AP_BASE + 0x04)
+#define MXC_CRMAP_ACDER1		(MXC_CRM_AP_BASE + 0x08)
+#define MXC_CRMAP_ACDER2		(MXC_CRM_AP_BASE + 0x0C)
+#define MXC_CRMAP_ACGCR			(MXC_CRM_AP_BASE + 0x10)
+#define MXC_CRMAP_ACCGCR		(MXC_CRM_AP_BASE + 0x14)
+#define MXC_CRMAP_AMLPMRA		(MXC_CRM_AP_BASE + 0x18)
+#define MXC_CRMAP_AMLPMRB		(MXC_CRM_AP_BASE + 0x1C)
+#define MXC_CRMAP_AMLPMRC		(MXC_CRM_AP_BASE + 0x20)
+#define MXC_CRMAP_AMLPMRD		(MXC_CRM_AP_BASE + 0x24)
+#define MXC_CRMAP_AMLPMRE1		(MXC_CRM_AP_BASE + 0x28)
+#define MXC_CRMAP_AMLPMRE2		(MXC_CRM_AP_BASE + 0x2C)
+#define MXC_CRMAP_AMLPMRF		(MXC_CRM_AP_BASE + 0x30)
+#define MXC_CRMAP_AMLPMRG		(MXC_CRM_AP_BASE + 0x34)
+#define MXC_CRMAP_APGCR			(MXC_CRM_AP_BASE + 0x38)
+#define MXC_CRMAP_ACSR			(MXC_CRM_AP_BASE + 0x3C)
+#define MXC_CRMAP_ADCR			(MXC_CRM_AP_BASE + 0x40)
+#define MXC_CRMAP_ACR			(MXC_CRM_AP_BASE + 0x44)
+#define MXC_CRMAP_AMCR			(MXC_CRM_AP_BASE + 0x48)
+#define MXC_CRMAP_APCR			(MXC_CRM_AP_BASE + 0x4C)
+#define MXC_CRMAP_AMORA			(MXC_CRM_AP_BASE + 0x50)
+#define MXC_CRMAP_AMORB			(MXC_CRM_AP_BASE + 0x54)
+#define MXC_CRMAP_AGPR			(MXC_CRM_AP_BASE + 0x58)
+#define MXC_CRMAP_APRA			(MXC_CRM_AP_BASE + 0x5C)
+#define MXC_CRMAP_APRB			(MXC_CRM_AP_BASE + 0x60)
+#define MXC_CRMAP_APOR			(MXC_CRM_AP_BASE + 0x64)
+#define MXC_CRMAP_ADFMR			(MXC_CRM_AP_BASE + 0x68)
+
+/* CRM AP Register Bit definitions */
+#define MXC_CRMAP_ASCSR_CRS			0x10000
+#define MXC_CRMAP_ASCSR_AP_PATDIV2_OFFSET	15
+#define MXC_CRMAP_ASCSR_AP_PATREF_DIV2		0x8000
+#define MXC_CRMAP_ASCSR_USBSEL_OFFSET		13
+#define MXC_CRMAP_ASCSR_USBSEL_MASK		(0x3 << 13)
+#define MXC_CRMAP_ASCSR_CSISEL_OFFSET		11
+#define MXC_CRMAP_ASCSR_CSISEL_MASK		(0x3 << 11)
+#define MXC_CRMAP_ASCSR_SSI2SEL_OFFSET		7
+#define MXC_CRMAP_ASCSR_SSI2SEL_MASK		(0x3 << 7)
+#define MXC_CRMAP_ASCSR_SSI1SEL_OFFSET		5
+#define MXC_CRMAP_ASCSR_SSI1SEL_MASK		(0x3 << 5)
+#define MXC_CRMAP_ASCSR_APSEL_OFFSET		3
+#define MXC_CRMAP_ASCSR_APSEL_MASK		(0x3 << 3)
+#define MXC_CRMAP_ASCSR_AP_PATDIV1_OFFSET	2
+#define MXC_CRMAP_ASCSR_AP_PATREF_DIV1		0x4
+#define MXC_CRMAP_ASCSR_APISEL			0x1
+
+#define MXC_CRMAP_ACDR_ARMDIV_OFFSET		8
+#define MXC_CRMAP_ACDR_ARMDIV_MASK		(0xF << 8)
+#define MXC_CRMAP_ACDR_AHBDIV_OFFSET		4
+#define MXC_CRMAP_ACDR_AHBDIV_MASK		(0xF << 4)
+#define MXC_CRMAP_ACDR_IPDIV_OFFSET		0
+#define MXC_CRMAP_ACDR_IPDIV_MASK		0xF
+
+#define MXC_CRMAP_ACDER1_CSIEN_OFFSET		30
+#define MXC_CRMAP_ACDER1_CSIDIV_OFFSET		24
+#define MXC_CRMAP_ACDER1_CSIDIV_MASK		(0x3F << 24)
+#define MXC_CRMAP_ACDER1_SSI2EN_OFFSET		14
+#define MXC_CRMAP_ACDER1_SSI2DIV_OFFSET		8
+#define MXC_CRMAP_ACDER1_SSI2DIV_MASK		(0x3F << 8)
+#define MXC_CRMAP_ACDER1_SSI1EN_OFFSET		6
+#define MXC_CRMAP_ACDER1_SSI1DIV_OFFSET		0
+#define MXC_CRMAP_ACDER1_SSI1DIV_MASK		0x3F
+
+#define MXC_CRMAP_ACDER2_CRCT_CLK_DIV_OFFSET	24
+#define MXC_CRMAP_ACDER2_CRCT_CLK_DIV_MASK	(0x7 << 24)
+#define MXC_CRMAP_ACDER2_NFCEN_OFFSET		20
+#define MXC_CRMAP_ACDER2_NFCDIV_OFFSET		16
+#define MXC_CRMAP_ACDER2_NFCDIV_MASK		(0xF << 16)
+#define MXC_CRMAP_ACDER2_USBEN_OFFSET		12
+#define MXC_CRMAP_ACDER2_USBDIV_OFFSET		8
+#define MXC_CRMAP_ACDER2_USBDIV_MASK		(0xF << 8)
+#define MXC_CRMAP_ACDER2_BAUD_ISEL_OFFSET	5
+#define MXC_CRMAP_ACDER2_BAUD_ISEL_MASK		(0x3 << 5)
+#define MXC_CRMAP_ACDER2_BAUDDIV_OFFSET		0
+#define MXC_CRMAP_ACDER2_BAUDDIV_MASK		0xF
+
+#define MXC_CRMAP_AMLPMRA_MLPMA7_OFFSET		22
+#define MXC_CRMAP_AMLPMRA_MLPMA7_MASK		(0x7 << 22)
+#define MXC_CRMAP_AMLPMRA_MLPMA6_OFFSET		19
+#define MXC_CRMAP_AMLPMRA_MLPMA6_MASK		(0x7 << 19)
+#define MXC_CRMAP_AMLPMRA_MLPMA4_OFFSET		12
+#define MXC_CRMAP_AMLPMRA_MLPMA4_MASK		(0x7 << 12)
+#define MXC_CRMAP_AMLPMRA_MLPMA3_OFFSET		9
+#define MXC_CRMAP_AMLPMRA_MLPMA3_MASK		(0x7 << 9)
+#define MXC_CRMAP_AMLPMRA_MLPMA2_OFFSET		6
+#define MXC_CRMAP_AMLPMRA_MLPMA2_MASK		(0x7 << 6)
+#define MXC_CRMAP_AMLPMRA_MLPMA1_OFFSET		3
+#define MXC_CRMAP_AMLPMRA_MLPMA1_MASK		(0x7 << 3)
+
+#define MXC_CRMAP_AMLPMRB_MLPMB0_OFFSET		0
+#define MXC_CRMAP_AMLPMRB_MLPMB0_MASK		0x7
+
+#define MXC_CRMAP_AMLPMRC_MLPMC9_OFFSET		28
+#define MXC_CRMAP_AMLPMRC_MLPMC9_MASK		(0x7 << 28)
+#define MXC_CRMAP_AMLPMRC_MLPMC7_OFFSET		22
+#define MXC_CRMAP_AMLPMRC_MLPMC7_MASK		(0x7 << 22)
+#define MXC_CRMAP_AMLPMRC_MLPMC5_OFFSET		16
+#define MXC_CRMAP_AMLPMRC_MLPMC5_MASK		(0x7 << 16)
+#define MXC_CRMAP_AMLPMRC_MLPMC4_OFFSET		12
+#define MXC_CRMAP_AMLPMRC_MLPMC4_MASK		(0x7 << 12)
+#define MXC_CRMAP_AMLPMRC_MLPMC3_OFFSET		9
+#define MXC_CRMAP_AMLPMRC_MLPMC3_MASK		(0x7 << 9)
+#define MXC_CRMAP_AMLPMRC_MLPMC2_OFFSET		6
+#define MXC_CRMAP_AMLPMRC_MLPMC2_MASK		(0x7 << 6)
+#define MXC_CRMAP_AMLPMRC_MLPMC1_OFFSET		3
+#define MXC_CRMAP_AMLPMRC_MLPMC1_MASK		(0x7 << 3)
+#define MXC_CRMAP_AMLPMRC_MLPMC0_OFFSET		0
+#define MXC_CRMAP_AMLPMRC_MLPMC0_MASK		0x7
+
+#define MXC_CRMAP_AMLPMRD_MLPMD7_OFFSET		22
+#define MXC_CRMAP_AMLPMRD_MLPMD7_MASK		(0x7 << 22)
+#define MXC_CRMAP_AMLPMRD_MLPMD4_OFFSET		12
+#define MXC_CRMAP_AMLPMRD_MLPMD4_MASK		(0x7 << 12)
+#define MXC_CRMAP_AMLPMRD_MLPMD3_OFFSET		9
+#define MXC_CRMAP_AMLPMRD_MLPMD3_MASK		(0x7 << 9)
+#define MXC_CRMAP_AMLPMRD_MLPMD2_OFFSET		6
+#define MXC_CRMAP_AMLPMRD_MLPMD2_MASK		(0x7 << 6)
+#define MXC_CRMAP_AMLPMRD_MLPMD0_OFFSET		0
+#define MXC_CRMAP_AMLPMRD_MLPMD0_MASK		0x7
+
+#define MXC_CRMAP_AMLPMRE1_MLPME9_OFFSET	28
+#define MXC_CRMAP_AMLPMRE1_MLPME9_MASK		(0x7 << 28)
+#define MXC_CRMAP_AMLPMRE1_MLPME8_OFFSET	25
+#define MXC_CRMAP_AMLPMRE1_MLPME8_MASK		(0x7 << 25)
+#define MXC_CRMAP_AMLPMRE1_MLPME7_OFFSET	22
+#define MXC_CRMAP_AMLPMRE1_MLPME7_MASK		(0x7 << 22)
+#define MXC_CRMAP_AMLPMRE1_MLPME6_OFFSET	19
+#define MXC_CRMAP_AMLPMRE1_MLPME6_MASK		(0x7 << 19)
+#define MXC_CRMAP_AMLPMRE1_MLPME5_OFFSET	16
+#define MXC_CRMAP_AMLPMRE1_MLPME5_MASK		(0x7 << 16)
+#define MXC_CRMAP_AMLPMRE1_MLPME4_OFFSET	12
+#define MXC_CRMAP_AMLPMRE1_MLPME4_MASK		(0x7 << 12)
+#define MXC_CRMAP_AMLPMRE1_MLPME3_OFFSET	9
+#define MXC_CRMAP_AMLPMRE1_MLPME3_MASK		(0x7 << 9)
+#define MXC_CRMAP_AMLPMRE1_MLPME2_OFFSET	6
+#define MXC_CRMAP_AMLPMRE1_MLPME2_MASK		(0x7 << 6)
+#define MXC_CRMAP_AMLPMRE1_MLPME1_OFFSET	3
+#define MXC_CRMAP_AMLPMRE1_MLPME1_MASK		(0x7 << 3)
+#define MXC_CRMAP_AMLPMRE1_MLPME0_OFFSET	0
+#define MXC_CRMAP_AMLPMRE1_MLPME0_MASK		0x7
+
+#define MXC_CRMAP_AMLPMRE2_MLPME0_OFFSET	0
+#define MXC_CRMAP_AMLPMRE2_MLPME0_MASK		0x7
+
+#define MXC_CRMAP_AMLPMRF_MLPMF6_OFFSET		19
+#define MXC_CRMAP_AMLPMRF_MLPMF6_MASK		(0x7 << 19)
+#define MXC_CRMAP_AMLPMRF_MLPMF5_OFFSET		16
+#define MXC_CRMAP_AMLPMRF_MLPMF5_MASK		(0x7 << 16)
+#define MXC_CRMAP_AMLPMRF_MLPMF3_OFFSET		9
+#define MXC_CRMAP_AMLPMRF_MLPMF3_MASK		(0x7 << 9)
+#define MXC_CRMAP_AMLPMRF_MLPMF2_OFFSET		6
+#define MXC_CRMAP_AMLPMRF_MLPMF2_MASK		(0x7 << 6)
+#define MXC_CRMAP_AMLPMRF_MLPMF1_OFFSET		3
+#define MXC_CRMAP_AMLPMRF_MLPMF1_MASK		(0x7 << 3)
+#define MXC_CRMAP_AMLPMRF_MLPMF0_OFFSET		0
+#define MXC_CRMAP_AMLPMRF_MLPMF0_MASK		(0x7 << 0)
+
+#define MXC_CRMAP_AMLPMRG_MLPMG9_OFFSET		28
+#define MXC_CRMAP_AMLPMRG_MLPMG9_MASK		(0x7 << 28)
+#define MXC_CRMAP_AMLPMRG_MLPMG7_OFFSET		22
+#define MXC_CRMAP_AMLPMRG_MLPMG7_MASK		(0x7 << 22)
+#define MXC_CRMAP_AMLPMRG_MLPMG6_OFFSET		19
+#define MXC_CRMAP_AMLPMRG_MLPMG6_MASK		(0x7 << 19)
+#define MXC_CRMAP_AMLPMRG_MLPMG5_OFFSET		16
+#define MXC_CRMAP_AMLPMRG_MLPMG5_MASK		(0x7 << 16)
+#define MXC_CRMAP_AMLPMRG_MLPMG4_OFFSET		12
+#define MXC_CRMAP_AMLPMRG_MLPMG4_MASK		(0x7 << 12)
+#define MXC_CRMAP_AMLPMRG_MLPMG3_OFFSET		9
+#define MXC_CRMAP_AMLPMRG_MLPMG3_MASK		(0x7 << 9)
+#define MXC_CRMAP_AMLPMRG_MLPMG2_OFFSET		6
+#define MXC_CRMAP_AMLPMRG_MLPMG2_MASK		(0x7 << 6)
+#define MXC_CRMAP_AMLPMRG_MLPMG1_OFFSET		3
+#define MXC_CRMAP_AMLPMRG_MLPMG1_MASK		(0x7 << 3)
+#define MXC_CRMAP_AMLPMRG_MLPMG0_OFFSET		0
+#define MXC_CRMAP_AMLPMRG_MLPMG0_MASK		0x7
+
+#define MXC_CRMAP_AGPR_IPUPAD_OFFSET		20
+#define MXC_CRMAP_AGPR_IPUPAD_MASK		(0x7 << 20)
+
+#define MXC_CRMAP_APRA_EL1TEN_OFFSET		29
+#define MXC_CRMAP_APRA_SIMEN_OFFSET		24
+#define MXC_CRMAP_APRA_UART3DIV_OFFSET		17
+#define MXC_CRMAP_APRA_UART3DIV_MASK		(0xF << 17)
+#define MXC_CRMAP_APRA_UART3EN_OFFSET		16
+#define MXC_CRMAP_APRA_SAHARA_DIV2_CLKEN_OFFSET	14
+#define MXC_CRMAP_APRA_MQSPIEN_OFFSET		13
+#define MXC_CRMAP_APRA_UART2EN_OFFSET		8
+#define MXC_CRMAP_APRA_UART1EN_OFFSET		0
+
+#define MXC_CRMAP_APRB_SDHC2_ISEL_OFFSET	13
+#define MXC_CRMAP_APRB_SDHC2_ISEL_MASK		(0x7 << 13)
+#define MXC_CRMAP_APRB_SDHC2_DIV_OFFSET		9
+#define MXC_CRMAP_APRB_SDHC2_DIV_MASK		(0xF << 9)
+#define MXC_CRMAP_APRB_SDHC2EN_OFFSET		8
+#define MXC_CRMAP_APRB_SDHC1_ISEL_OFFSET	5
+#define MXC_CRMAP_APRB_SDHC1_ISEL_MASK		(0x7 << 5)
+#define MXC_CRMAP_APRB_SDHC1_DIV_OFFSET		1
+#define MXC_CRMAP_APRB_SDHC1_DIV_MASK		(0xF << 1)
+#define MXC_CRMAP_APRB_SDHC1EN_OFFSET		0
+
+#define MXC_CRMAP_ACSR_ADS_OFFSET		8
+#define MXC_CRMAP_ACSR_ADS			(0x1 << 8)
+#define MXC_CRMAP_ACSR_ACS			0x1
+
+#define MXC_CRMAP_ADCR_LFDF_0			(0x0 << 8)
+#define MXC_CRMAP_ADCR_LFDF_2			(0x1 << 8)
+#define MXC_CRMAP_ADCR_LFDF_4			(0x2 << 8)
+#define MXC_CRMAP_ADCR_LFDF_8			(0x3 << 8)
+#define MXC_CRMAP_ADCR_LFDF_OFFSET		8
+#define MXC_CRMAP_ADCR_LFDF_MASK		(0x3 << 8)
+#define MXC_CRMAP_ADCR_ALT_PLL			0x80
+#define MXC_CRMAP_ADCR_DFS_DIVEN		0x20
+#define MXC_CRMAP_ADCR_DIV_BYP			0x2
+#define MXC_CRMAP_ADCR_VSTAT			0x8
+#define MXC_CRMAP_ADCR_TSTAT			0x10
+#define MXC_CRMAP_ADCR_DVFS_VCTRL		0x10
+#define MXC_CRMAP_ADCR_CLK_ON			0x40
+
+#define MXC_CRMAP_ADFMR_FC_OFFSET		16
+#define MXC_CRMAP_ADFMR_FC_MASK			(0x1F << 16)
+#define MXC_CRMAP_ADFMR_MF_OFFSET		1
+#define MXC_CRMAP_ADFMR_MF_MASK			(0x3FF << 1)
+#define MXC_CRMAP_ADFMR_DFM_CLK_READY		0x1
+#define MXC_CRMAP_ADFMR_DFM_PWR_DOWN		0x8000
+
+#define MXC_CRMAP_ACR_CKOHS_HIGH		(1 << 18)
+#define MXC_CRMAP_ACR_CKOS_HIGH			(1 << 16)
+#define MXC_CRMAP_ACR_CKOHS_MASK		(0x7 << 12)
+#define MXC_CRMAP_ACR_CKOHD			(1 << 11)
+#define MXC_CRMAP_ACR_CKOHDIV_MASK		(0xF << 8)
+#define MXC_CRMAP_ACR_CKOHDIV_OFFSET		8
+#define MXC_CRMAP_ACR_CKOD			(1 << 7)
+#define MXC_CRMAP_ACR_CKOS_MASK			(0x7 << 4)
+
+/* AP Warm reset */
+#define MXC_CRMAP_AMCR_SW_AP			(1 << 14)
+
+/* Bit definitions of ACGCR in CRM_AP for tree level clock gating */
+#define MXC_CRMAP_ACGCR_ACG0_STOP_WAIT		0x00000001
+#define MXC_CRMAP_ACGCR_ACG0_STOP		0x00000003
+#define MXC_CRMAP_ACGCR_ACG0_RUN		0x00000007
+#define MXC_CRMAP_ACGCR_ACG0_DISABLED		0x00000000
+
+#define MXC_CRMAP_ACGCR_ACG1_STOP_WAIT		0x00000008
+#define MXC_CRMAP_ACGCR_ACG1_STOP		0x00000018
+#define MXC_CRMAP_ACGCR_ACG1_RUN		0x00000038
+#define MXC_CRMAP_ACGCR_ACG1_DISABLED		0x00000000
+
+#define MXC_CRMAP_ACGCR_ACG2_STOP_WAIT		0x00000040
+#define MXC_CRMAP_ACGCR_ACG2_STOP		0x000000C0
+#define MXC_CRMAP_ACGCR_ACG2_RUN		0x000001C0
+#define MXC_CRMAP_ACGCR_ACG2_DISABLED		0x00000000
+
+#define MXC_CRMAP_ACGCR_ACG3_STOP_WAIT		0x00000200
+#define MXC_CRMAP_ACGCR_ACG3_STOP		0x00000600
+#define MXC_CRMAP_ACGCR_ACG3_RUN		0x00000E00
+#define MXC_CRMAP_ACGCR_ACG3_DISABLED		0x00000000
+
+#define MXC_CRMAP_ACGCR_ACG4_STOP_WAIT		0x00001000
+#define MXC_CRMAP_ACGCR_ACG4_STOP		0x00003000
+#define MXC_CRMAP_ACGCR_ACG4_RUN		0x00007000
+#define MXC_CRMAP_ACGCR_ACG4_DISABLED		0x00000000
+
+#define MXC_CRMAP_ACGCR_ACG5_STOP_WAIT		0x00010000
+#define MXC_CRMAP_ACGCR_ACG5_STOP		0x00030000
+#define MXC_CRMAP_ACGCR_ACG5_RUN		0x00070000
+#define MXC_CRMAP_ACGCR_ACG5_DISABLED		0x00000000
+
+#define MXC_CRMAP_ACGCR_ACG6_STOP_WAIT		0x00080000
+#define MXC_CRMAP_ACGCR_ACG6_STOP		0x00180000
+#define MXC_CRMAP_ACGCR_ACG6_RUN		0x00380000
+#define MXC_CRMAP_ACGCR_ACG6_DISABLED		0x00000000
+
+#define NUM_GATE_CTRL				6
+
+/* CRM COM Register Offsets */
+#define MXC_CRMCOM_CSCR				(MXC_CRM_COM_BASE + 0x0C)
+#define MXC_CRMCOM_CCCR				(MXC_CRM_COM_BASE + 0x10)
+
+/* CRM COM Bit Definitions */
+#define MXC_CRMCOM_CSCR_PPD1			0x08000000
+#define MXC_CRMCOM_CSCR_CKOHSEL			(1 << 18)
+#define MXC_CRMCOM_CSCR_CKOSEL			(1 << 17)
+#define MXC_CRMCOM_CCCR_CC_DIV_OFFSET		8
+#define MXC_CRMCOM_CCCR_CC_DIV_MASK		(0x1F << 8)
+#define MXC_CRMCOM_CCCR_CC_SEL_OFFSET		0
+#define MXC_CRMCOM_CCCR_CC_SEL_MASK		0x3
+
+/* DSM Register Offsets */
+#define MXC_DSM_SLEEP_TIME			(MXC_DSM_BASE + 0x0c)
+#define MXC_DSM_CONTROL0			(MXC_DSM_BASE + 0x20)
+#define MXC_DSM_CONTROL1			(MXC_DSM_BASE + 0x24)
+#define MXC_DSM_CTREN				(MXC_DSM_BASE + 0x28)
+#define MXC_DSM_WARM_PER			(MXC_DSM_BASE + 0x40)
+#define MXC_DSM_LOCK_PER			(MXC_DSM_BASE + 0x44)
+#define MXC_DSM_MGPER				(MXC_DSM_BASE + 0x4c)
+#define MXC_DSM_CRM_CONTROL			(MXC_DSM_BASE + 0x50)
+
+/* Bit definitions of various registers in DSM */
+#define MXC_DSM_CRM_CTRL_DVFS_BYP		0x00000008
+#define MXC_DSM_CRM_CTRL_DVFS_VCTRL		0x00000004
+#define MXC_DSM_CRM_CTRL_LPMD1			0x00000002
+#define MXC_DSM_CRM_CTRL_LPMD0			0x00000001
+#define MXC_DSM_CRM_CTRL_LPMD_STOP_MODE		0x00000000
+#define MXC_DSM_CRM_CTRL_LPMD_WAIT_MODE		0x00000001
+#define MXC_DSM_CRM_CTRL_LPMD_RUN_MODE		0x00000003
+#define MXC_DSM_CONTROL0_STBY_COMMIT_EN		0x00000200
+#define MXC_DSM_CONTROL0_MSTR_EN		0x00000001
+#define MXC_DSM_CONTROL0_RESTART		0x00000010
+/* Counter Block reset */
+#define MXC_DSM_CONTROL1_CB_RST			0x00000002
+/* State Machine reset */
+#define MXC_DSM_CONTROL1_SM_RST			0x00000004
+/* Bit needed to reset counter block */
+#define MXC_CONTROL1_RST_CNT32			0x00000008
+#define MXC_DSM_CONTROL1_RST_CNT32_EN		0x00000800
+#define MXC_DSM_CONTROL1_SLEEP			0x00000100
+#define MXC_DSM_CONTROL1_WAKEUP_DISABLE		0x00004000
+#define MXC_DSM_CTREN_CNT32			0x00000001
+
+/* Magic Fix enable bit */
+#define MXC_DSM_MGPER_EN_MGFX			0x80000000
+#define MXC_DSM_MGPER_PER_MASK			0x000003FF
+#define MXC_DSM_MGPER_PER(n)			(MXC_DSM_MGPER_PER_MASK & n)
+
+/* Address offsets of the CLKCTL registers */
+#define MXC_CLKCTL_GP_CTRL	(MXC_CLKCTL_BASE + 0x00)
+#define MXC_CLKCTL_GP_SER	(MXC_CLKCTL_BASE + 0x04)
+#define MXC_CLKCTL_GP_CER	(MXC_CLKCTL_BASE + 0x08)
+
+#endif /* _ARCH_ARM_MACH_MXC91231_CRM_REGS_H_ */
diff --git a/arch/arm/mach-mxc91231/devices.c b/arch/arm/mach-mxc91231/devices.c
new file mode 100644
index 00000000000..353bd977b39
--- /dev/null
+++ b/arch/arm/mach-mxc91231/devices.c
@@ -0,0 +1,251 @@
+/*
+ * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Sascha Hauer, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA  02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/serial.h>
+#include <linux/gpio.h>
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <mach/imx-uart.h>
+
+static struct resource uart0[] = {
+	{
+		.start = MXC91231_UART1_BASE_ADDR,
+		.end = MXC91231_UART1_BASE_ADDR + 0x0B5,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC91231_INT_UART1_RX,
+		.end = MXC91231_INT_UART1_RX,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		.start = MXC91231_INT_UART1_TX,
+		.end = MXC91231_INT_UART1_TX,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		.start = MXC91231_INT_UART1_MINT,
+		.end = MXC91231_INT_UART1_MINT,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_uart_device0 = {
+	.name = "imx-uart",
+	.id = 0,
+	.resource = uart0,
+	.num_resources = ARRAY_SIZE(uart0),
+};
+
+static struct resource uart1[] = {
+	{
+		.start = MXC91231_UART2_BASE_ADDR,
+		.end = MXC91231_UART2_BASE_ADDR + 0x0B5,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC91231_INT_UART2_RX,
+		.end = MXC91231_INT_UART2_RX,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		.start = MXC91231_INT_UART2_TX,
+		.end = MXC91231_INT_UART2_TX,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		.start = MXC91231_INT_UART2_MINT,
+		.end = MXC91231_INT_UART2_MINT,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_uart_device1 = {
+	.name = "imx-uart",
+	.id = 1,
+	.resource = uart1,
+	.num_resources = ARRAY_SIZE(uart1),
+};
+
+static struct resource uart2[] = {
+	{
+		.start = MXC91231_UART3_BASE_ADDR,
+		.end = MXC91231_UART3_BASE_ADDR + 0x0B5,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC91231_INT_UART3_RX,
+		.end = MXC91231_INT_UART3_RX,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		.start = MXC91231_INT_UART3_TX,
+		.end = MXC91231_INT_UART3_TX,
+		.flags = IORESOURCE_IRQ,
+	}, {
+		.start = MXC91231_INT_UART3_MINT,
+		.end = MXC91231_INT_UART3_MINT,
+		.flags = IORESOURCE_IRQ,
+
+	},
+};
+
+struct platform_device mxc_uart_device2 = {
+	.name = "imx-uart",
+	.id = 2,
+	.resource = uart2,
+	.num_resources = ARRAY_SIZE(uart2),
+};
+
+/* GPIO port description */
+static struct mxc_gpio_port mxc_gpio_ports[] = {
+	[0] = {
+		.chip.label = "gpio-0",
+		.base = MXC91231_IO_ADDRESS(MXC91231_GPIO1_AP_BASE_ADDR),
+		.irq = MXC91231_INT_GPIO1,
+		.virtual_irq_start = MXC_GPIO_IRQ_START,
+	},
+	[1] = {
+		.chip.label = "gpio-1",
+		.base = MXC91231_IO_ADDRESS(MXC91231_GPIO2_AP_BASE_ADDR),
+		.irq = MXC91231_INT_GPIO2,
+		.virtual_irq_start = MXC_GPIO_IRQ_START + 32,
+	},
+	[2] = {
+		.chip.label = "gpio-2",
+		.base = MXC91231_IO_ADDRESS(MXC91231_GPIO3_AP_BASE_ADDR),
+		.irq = MXC91231_INT_GPIO3,
+		.virtual_irq_start = MXC_GPIO_IRQ_START + 64,
+	},
+	[3] = {
+		.chip.label = "gpio-3",
+		.base = MXC91231_IO_ADDRESS(MXC91231_GPIO4_SH_BASE_ADDR),
+		.irq = MXC91231_INT_GPIO4,
+		.virtual_irq_start = MXC_GPIO_IRQ_START + 96,
+	},
+};
+
+int __init mxc_register_gpios(void)
+{
+	return mxc_gpio_init(mxc_gpio_ports, ARRAY_SIZE(mxc_gpio_ports));
+}
+
+static struct resource mxc_nand_resources[] = {
+	{
+		.start	= MXC91231_NFC_BASE_ADDR,
+		.end	= MXC91231_NFC_BASE_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM
+	}, {
+		.start	= MXC91231_INT_NANDFC,
+		.end	= MXC91231_INT_NANDFC,
+		.flags	= IORESOURCE_IRQ
+	},
+};
+
+struct platform_device mxc_nand_device = {
+	.name = "mxc_nand",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(mxc_nand_resources),
+	.resource = mxc_nand_resources,
+};
+
+static struct resource mxc_sdhc0_resources[] = {
+	{
+		.start = MXC91231_MMC_SDHC1_BASE_ADDR,
+		.end = MXC91231_MMC_SDHC1_BASE_ADDR + SZ_16K - 1,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC91231_INT_MMC_SDHC1,
+		.end = MXC91231_INT_MMC_SDHC1,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource mxc_sdhc1_resources[] = {
+	{
+		.start = MXC91231_MMC_SDHC2_BASE_ADDR,
+		.end = MXC91231_MMC_SDHC2_BASE_ADDR + SZ_16K - 1,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC91231_INT_MMC_SDHC2,
+		.end = MXC91231_INT_MMC_SDHC2,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_sdhc_device0 = {
+	.name = "mxc-mmc",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(mxc_sdhc0_resources),
+	.resource = mxc_sdhc0_resources,
+};
+
+struct platform_device mxc_sdhc_device1 = {
+	.name = "mxc-mmc",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(mxc_sdhc1_resources),
+	.resource = mxc_sdhc1_resources,
+};
+
+static struct resource mxc_cspi0_resources[] = {
+	{
+		.start = MXC91231_CSPI1_BASE_ADDR,
+		.end = MXC91231_CSPI1_BASE_ADDR + 0x20,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC91231_INT_CSPI1,
+		.end = MXC91231_INT_CSPI1,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_cspi_device0 = {
+	.name = "spi_imx",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(mxc_cspi0_resources),
+	.resource = mxc_cspi0_resources,
+};
+
+static struct resource mxc_cspi1_resources[] = {
+	{
+		.start = MXC91231_CSPI2_BASE_ADDR,
+		.end = MXC91231_CSPI2_BASE_ADDR + 0x20,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC91231_INT_CSPI2,
+		.end = MXC91231_INT_CSPI2,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mxc_cspi_device1 = {
+	.name = "spi_imx",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(mxc_cspi1_resources),
+	.resource = mxc_cspi1_resources,
+};
+
+static struct resource mxc_wdog0_resources[] = {
+	{
+		.start = MXC91231_WDOG1_BASE_ADDR,
+		.end = MXC91231_WDOG1_BASE_ADDR + 0x10,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+struct platform_device mxc_wdog_device0 = {
+	.name = "mxc-wdt",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(mxc_wdog0_resources),
+	.resource = mxc_wdog0_resources,
+};
diff --git a/arch/arm/mach-mxc91231/devices.h b/arch/arm/mach-mxc91231/devices.h
new file mode 100644
index 00000000000..72a2136ce27
--- /dev/null
+++ b/arch/arm/mach-mxc91231/devices.h
@@ -0,0 +1,13 @@
+extern struct platform_device mxc_uart_device0;
+extern struct platform_device mxc_uart_device1;
+extern struct platform_device mxc_uart_device2;
+
+extern struct platform_device mxc_nand_device;
+
+extern struct platform_device mxc_sdhc_device0;
+extern struct platform_device mxc_sdhc_device1;
+
+extern struct platform_device mxc_cspi_device0;
+extern struct platform_device mxc_cspi_device1;
+
+extern struct platform_device mxc_wdog_device0;
diff --git a/arch/arm/mach-mxc91231/magx-zn5.c b/arch/arm/mach-mxc91231/magx-zn5.c
new file mode 100644
index 00000000000..8757573b0a8
--- /dev/null
+++ b/arch/arm/mach-mxc91231/magx-zn5.c
@@ -0,0 +1,59 @@
+/*
+ * Copyright 2009 Dmitriy Taychenachev <dimichxp@gmail.com>
+ *
+ * This file is released under the GPLv2 or later.
+ */
+
+#include <linux/irq.h>
+#include <linux/init.h>
+#include <linux/device.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/time.h>
+#include <asm/mach/arch.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/mmc.h>
+#include <mach/imx-uart.h>
+
+#include "devices.h"
+
+static struct imxuart_platform_data uart_pdata = {
+};
+
+static struct imxmmc_platform_data sdhc_pdata = {
+};
+
+static void __init zn5_init(void)
+{
+	pm_power_off = mxc91231_power_off;
+
+	mxc_register_device(&mxc_uart_device1, &uart_pdata);
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+
+	mxc_register_device(&mxc_sdhc_device0, &sdhc_pdata);
+
+	mxc_register_device(&mxc_wdog_device0, NULL);
+
+	return;
+}
+
+static void __init zn5_timer_init(void)
+{
+	mxc91231_clocks_init(26000000); /* 26mhz ckih */
+}
+
+struct sys_timer zn5_timer = {
+	.init = zn5_timer_init,
+};
+
+MACHINE_START(MAGX_ZN5, "Motorola Zn5")
+	.phys_io	= MXC91231_AIPS1_BASE_ADDR,
+	.io_pg_offst	= ((MXC91231_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params	= PHYS_OFFSET + 0x100,
+	.map_io		= mxc91231_map_io,
+	.init_irq	= mxc91231_init_irq,
+	.timer		= &zn5_timer,
+	.init_machine	= zn5_init,
+MACHINE_END
diff --git a/arch/arm/mach-mxc91231/mm.c b/arch/arm/mach-mxc91231/mm.c
new file mode 100644
index 00000000000..6becda3ff33
--- /dev/null
+++ b/arch/arm/mach-mxc91231/mm.c
@@ -0,0 +1,94 @@
+/*
+ *  Copyright (C) 1999,2000 Arm Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ *  Copyright 2004-2005 Freescale Semiconductor, Inc. All Rights Reserved.
+ *    - add MXC specific definitions
+ *  Copyright 2006 Motorola, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <asm/pgtable.h>
+#include <asm/mach/map.h>
+
+/*
+ * This structure defines the MXC memory map.
+ */
+static struct map_desc mxc_io_desc[] __initdata = {
+	{
+		.virtual	= MXC91231_L2CC_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(MXC91231_L2CC_BASE_ADDR),
+		.length		= MXC91231_L2CC_SIZE,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= MXC91231_X_MEMC_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(MXC91231_X_MEMC_BASE_ADDR),
+		.length		= MXC91231_X_MEMC_SIZE,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= MXC91231_ROMP_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(MXC91231_ROMP_BASE_ADDR),
+		.length		= MXC91231_ROMP_SIZE,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= MXC91231_AVIC_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(MXC91231_AVIC_BASE_ADDR),
+		.length		= MXC91231_AVIC_SIZE,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= MXC91231_AIPS1_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(MXC91231_AIPS1_BASE_ADDR),
+		.length		= MXC91231_AIPS1_SIZE,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= MXC91231_SPBA0_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(MXC91231_SPBA0_BASE_ADDR),
+		.length		= MXC91231_SPBA0_SIZE,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= MXC91231_SPBA1_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(MXC91231_SPBA1_BASE_ADDR),
+		.length		= MXC91231_SPBA1_SIZE,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= MXC91231_AIPS2_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(MXC91231_AIPS2_BASE_ADDR),
+		.length		= MXC91231_AIPS2_SIZE,
+		.type		= MT_DEVICE,
+	},
+};
+
+/*
+ * This function initializes the memory map. It is called during the
+ * system startup to create static physical to virtual memory map for
+ * the IO modules.
+ */
+void __init mxc91231_map_io(void)
+{
+	mxc_set_cpu_type(MXC_CPU_MXC91231);
+
+	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
+}
+
+void __init mxc91231_init_irq(void)
+{
+	mxc_init_irq(MXC91231_IO_ADDRESS(MXC91231_AVIC_BASE_ADDR));
+}
diff --git a/arch/arm/mach-mxc91231/system.c b/arch/arm/mach-mxc91231/system.c
new file mode 100644
index 00000000000..736f7efd874
--- /dev/null
+++ b/arch/arm/mach-mxc91231/system.c
@@ -0,0 +1,51 @@
+/*
+ * Copyright 2009 Dmitriy Taychenachev <dimichxp@gmail.com>
+ *
+ * This file is released under the GPLv2 or later.
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+
+#include <asm/proc-fns.h>
+#include <mach/hardware.h>
+
+#include "crm_regs.h"
+
+#define WDOG_WCR		MXC91231_IO_ADDRESS(MXC91231_WDOG1_BASE_ADDR)
+#define WDOG_WCR_OUT_ENABLE	(1 << 6)
+#define WDOG_WCR_ASSERT		(1 << 5)
+
+void mxc91231_power_off(void)
+{
+	u16 wcr;
+
+	wcr = __raw_readw(WDOG_WCR);
+	wcr |= WDOG_WCR_OUT_ENABLE;
+	wcr &= ~WDOG_WCR_ASSERT;
+	__raw_writew(wcr, WDOG_WCR);
+}
+
+void mxc91231_arch_reset(char mode, const char *cmd)
+{
+	u32 amcr;
+
+	/* Reset the AP using CRM */
+	amcr = __raw_readl(MXC_CRMAP_AMCR);
+	amcr &= ~MXC_CRMAP_AMCR_SW_AP;
+	__raw_writel(amcr, MXC_CRMAP_AMCR);
+
+	mdelay(10);
+	cpu_reset(0);
+}
+
+void mxc91231_prepare_idle(void)
+{
+	u32 crm_ctl;
+
+	/* Go to WAIT mode after WFI */
+	crm_ctl = __raw_readl(MXC_DSM_CRM_CONTROL);
+	crm_ctl &= ~(MXC_DSM_CRM_CTRL_LPMD0 | MXC_DSM_CRM_CTRL_LPMD1);
+	crm_ctl |=  MXC_DSM_CRM_CTRL_LPMD_WAIT_MODE;
+	__raw_writel(crm_ctl, MXC_DSM_CRM_CONTROL);
+}
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index e342a2e6160..ca5c7c22634 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -34,12 +34,20 @@ config ARCH_MX3
 	help
 	  This enables support for systems based on the Freescale i.MX3 family
 
+config ARCH_MXC91231
+	bool "MXC91231-based"
+	select CPU_V6
+	select COMMON_CLKDEV
+	help
+	  This enables support for systems based on the Freescale MXC91231 family
+
 endchoice
 
 source "arch/arm/mach-mx1/Kconfig"
 source "arch/arm/mach-mx2/Kconfig"
 source "arch/arm/mach-mx3/Kconfig"
 source "arch/arm/mach-mx25/Kconfig"
+source "arch/arm/mach-mxc91231/Kconfig"
 
 endmenu
 
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index 4e7af741239..286cb9b0a25 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -20,6 +20,7 @@ extern void mx25_map_io(void);
 extern void mx27_map_io(void);
 extern void mx31_map_io(void);
 extern void mx35_map_io(void);
+extern void mxc91231_map_io(void);
 extern void mxc_init_irq(void __iomem *);
 extern void mx1_init_irq(void);
 extern void mx21_init_irq(void);
@@ -27,6 +28,7 @@ extern void mx25_init_irq(void);
 extern void mx27_init_irq(void);
 extern void mx31_init_irq(void);
 extern void mx35_init_irq(void);
+extern void mxc91231_init_irq(void);
 extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int);
 extern int mx1_clocks_init(unsigned long fref);
 extern int mx21_clocks_init(unsigned long lref, unsigned long fref);
@@ -34,9 +36,13 @@ extern int mx25_clocks_init(unsigned long fref);
 extern int mx27_clocks_init(unsigned long fref);
 extern int mx31_clocks_init(unsigned long fref);
 extern int mx35_clocks_init(void);
+extern int mxc91231_clocks_init(unsigned long fref);
 extern int mxc_register_gpios(void);
 extern int mxc_register_device(struct platform_device *pdev, void *data);
 extern void mxc_set_cpu_type(unsigned int type);
 extern void mxc_arch_reset_init(void __iomem *);
+extern void mxc91231_power_off(void);
+extern void mxc91231_arch_reset(int, const char *);
+extern void mxc91231_prepare_idle(void);
 
 #endif
diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S
index bf683de56b7..15b2b148a10 100644
--- a/arch/arm/plat-mxc/include/mach/debug-macro.S
+++ b/arch/arm/plat-mxc/include/mach/debug-macro.S
@@ -44,6 +44,14 @@
 #define UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
 #endif
 
+#ifdef CONFIG_ARCH_MXC91231
+#ifdef UART_PADDR
+#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
+#endif
+#include <mach/mxc91231.h>
+#define UART_PADDR	MXC91231_UART2_BASE_ADDR
+#define UART_VADDR	MXC91231_AIPS1_IO_ADDRESS(MXC91231_UART2_BASE_ADDR)
+#endif
 		.macro	addruart,rx
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
diff --git a/arch/arm/plat-mxc/include/mach/hardware.h b/arch/arm/plat-mxc/include/mach/hardware.h
index 569af3239c3..78db75475f6 100644
--- a/arch/arm/plat-mxc/include/mach/hardware.h
+++ b/arch/arm/plat-mxc/include/mach/hardware.h
@@ -46,6 +46,10 @@
 # include <mach/mx25.h>
 #endif
 
+#ifdef CONFIG_ARCH_MXC91231
+# include <mach/mxc91231.h>
+#endif
+
 #include <mach/mxc.h>
 
 #endif /* __ASM_ARCH_MXC_HARDWARE_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h
index f39e016c1cc..ead9d592168 100644
--- a/arch/arm/plat-mxc/include/mach/irqs.h
+++ b/arch/arm/plat-mxc/include/mach/irqs.h
@@ -26,6 +26,8 @@
 #define MXC_GPIO_IRQS		(32 * 3)
 #elif defined CONFIG_ARCH_MX25
 #define MXC_GPIO_IRQS		(32 * 4)
+#elif defined CONFIG_ARCH_MXC91231
+#define MXC_GPIO_IRQS		(32 * 4)
 #endif
 
 /*
diff --git a/arch/arm/plat-mxc/include/mach/memory.h b/arch/arm/plat-mxc/include/mach/memory.h
index 42db7394111..d3afafdcc0e 100644
--- a/arch/arm/plat-mxc/include/mach/memory.h
+++ b/arch/arm/plat-mxc/include/mach/memory.h
@@ -24,6 +24,8 @@
 #define PHYS_OFFSET		UL(0x80000000)
 #elif defined CONFIG_ARCH_MX25
 #define PHYS_OFFSET		UL(0x80000000)
+#elif defined CONFIG_ARCH_MXC91231
+#define PHYS_OFFSET		UL(0x90000000)
 #endif
 
 #if defined(CONFIG_MX1_VIDEO)
diff --git a/arch/arm/plat-mxc/include/mach/mxc.h b/arch/arm/plat-mxc/include/mach/mxc.h
index 882b816729b..51990536b84 100644
--- a/arch/arm/plat-mxc/include/mach/mxc.h
+++ b/arch/arm/plat-mxc/include/mach/mxc.h
@@ -30,6 +30,7 @@
 #define MXC_CPU_MX27		27
 #define MXC_CPU_MX31		31
 #define MXC_CPU_MX35		35
+#define MXC_CPU_MXC91231	91231
 
 #ifndef __ASSEMBLY__
 extern unsigned int __mxc_cpu_type;
@@ -107,13 +108,25 @@ extern unsigned int __mxc_cpu_type;
 # define cpu_is_mx35()		(0)
 #endif
 
+#ifdef CONFIG_ARCH_MXC91231
+# ifdef mxc_cpu_type
+#  undef mxc_cpu_type
+#  define mxc_cpu_type __mxc_cpu_type
+# else
+#  define mxc_cpu_type MXC_CPU_MXC91231
+# endif
+# define cpu_is_mxc91231()	(mxc_cpu_type == MXC_CPU_MXC91231)
+#else
+# define cpu_is_mxc91231()	(0)
+#endif
+
 #if defined(CONFIG_ARCH_MX3) || defined(CONFIG_ARCH_MX2)
 #define CSCR_U(n) (IO_ADDRESS(WEIM_BASE_ADDR) + n * 0x10)
 #define CSCR_L(n) (IO_ADDRESS(WEIM_BASE_ADDR) + n * 0x10 + 0x4)
 #define CSCR_A(n) (IO_ADDRESS(WEIM_BASE_ADDR) + n * 0x10 + 0x8)
 #endif
 
-#define cpu_is_mx3()	(cpu_is_mx31() || cpu_is_mx35())
+#define cpu_is_mx3()	(cpu_is_mx31() || cpu_is_mx35() || cpu_is_mxc91231())
 #define cpu_is_mx2()	(cpu_is_mx21() || cpu_is_mx27())
 
 #endif /*  __ASM_ARCH_MXC_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mxc91231.h b/arch/arm/plat-mxc/include/mach/mxc91231.h
new file mode 100644
index 00000000000..81484d1ef23
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/mxc91231.h
@@ -0,0 +1,315 @@
+/*
+ *  Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
+ *    - Platform specific register memory map
+ *
+ *  Copyright 2005-2007 Motorola, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __MACH_MXC91231_H__
+#define __MACH_MXC91231_H__
+
+/*
+ * L2CC
+ */
+#define MXC91231_L2CC_BASE_ADDR		0x30000000
+#define MXC91231_L2CC_BASE_ADDR_VIRT	0xF9000000
+#define MXC91231_L2CC_SIZE		SZ_64K
+
+/*
+ * AIPS 1
+ */
+#define MXC91231_AIPS1_BASE_ADDR	0x43F00000
+#define MXC91231_AIPS1_BASE_ADDR_VIRT	0xFC000000
+#define MXC91231_AIPS1_SIZE		SZ_1M
+
+#define MXC91231_AIPS1_CTRL_BASE_ADDR	MXC91231_AIPS1_BASE_ADDR
+#define MXC91231_MAX_BASE_ADDR		(MXC91231_AIPS1_BASE_ADDR + 0x04000)
+#define MXC91231_EVTMON_BASE_ADDR	(MXC91231_AIPS1_BASE_ADDR + 0x08000)
+#define MXC91231_CLKCTL_BASE_ADDR	(MXC91231_AIPS1_BASE_ADDR + 0x0C000)
+#define MXC91231_ETB_SLOT4_BASE_ADDR	(MXC91231_AIPS1_BASE_ADDR + 0x10000)
+#define MXC91231_ETB_SLOT5_BASE_ADDR	(MXC91231_AIPS1_BASE_ADDR + 0x14000)
+#define MXC91231_ECT_CTIO_BASE_ADDR	(MXC91231_AIPS1_BASE_ADDR + 0x18000)
+#define MXC91231_I2C_BASE_ADDR		(MXC91231_AIPS1_BASE_ADDR + 0x80000)
+#define MXC91231_MU_BASE_ADDR		(MXC91231_AIPS1_BASE_ADDR + 0x88000)
+#define MXC91231_UART1_BASE_ADDR	(MXC91231_AIPS1_BASE_ADDR + 0x90000)
+#define MXC91231_UART2_BASE_ADDR	(MXC91231_AIPS1_BASE_ADDR + 0x94000)
+#define MXC91231_DSM_BASE_ADDR		(MXC91231_AIPS1_BASE_ADDR + 0x98000)
+#define MXC91231_OWIRE_BASE_ADDR	(MXC91231_AIPS1_BASE_ADDR + 0x9C000)
+#define MXC91231_SSI1_BASE_ADDR		(MXC91231_AIPS1_BASE_ADDR + 0xA0000)
+#define MXC91231_KPP_BASE_ADDR		(MXC91231_AIPS1_BASE_ADDR + 0xA8000)
+#define MXC91231_IOMUX_AP_BASE_ADDR	(MXC91231_AIPS1_BASE_ADDR + 0xAC000)
+#define MXC91231_CTI_AP_BASE_ADDR	(MXC91231_AIPS1_BASE_ADDR + 0xB8000)
+
+/*
+ * AIPS 2
+ */
+#define MXC91231_AIPS2_BASE_ADDR	0x53F00000
+#define MXC91231_AIPS2_BASE_ADDR_VIRT	0xFC100000
+#define MXC91231_AIPS2_SIZE		SZ_1M
+
+#define MXC91231_GEMK_BASE_ADDR		(MXC91231_AIPS2_BASE_ADDR + 0x8C000)
+#define MXC91231_GPT1_BASE_ADDR		(MXC91231_AIPS2_BASE_ADDR + 0x90000)
+#define MXC91231_EPIT1_AP_BASE_ADDR	(MXC91231_AIPS2_BASE_ADDR + 0x94000)
+#define MXC91231_SCC_BASE_ADDR		(MXC91231_AIPS2_BASE_ADDR + 0xAC000)
+#define MXC91231_RNGA_BASE_ADDR		(MXC91231_AIPS2_BASE_ADDR + 0xB0000)
+#define MXC91231_IPU_CTRL_BASE_ADDR	(MXC91231_AIPS2_BASE_ADDR + 0xC0000)
+#define MXC91231_AUDMUX_BASE_ADDR	(MXC91231_AIPS2_BASE_ADDR + 0xC4000)
+#define MXC91231_EDIO_BASE_ADDR		(MXC91231_AIPS2_BASE_ADDR + 0xC8000)
+#define MXC91231_GPIO1_AP_BASE_ADDR	(MXC91231_AIPS2_BASE_ADDR + 0xCC000)
+#define MXC91231_GPIO2_AP_BASE_ADDR	(MXC91231_AIPS2_BASE_ADDR + 0xD0000)
+#define MXC91231_SDMA_BASE_ADDR		(MXC91231_AIPS2_BASE_ADDR + 0xD4000)
+#define MXC91231_RTC_BASE_ADDR		(MXC91231_AIPS2_BASE_ADDR + 0xD8000)
+#define MXC91231_WDOG1_BASE_ADDR	(MXC91231_AIPS2_BASE_ADDR + 0xDC000)
+#define MXC91231_PWM_BASE_ADDR		(MXC91231_AIPS2_BASE_ADDR + 0xE0000)
+#define MXC91231_GPIO3_AP_BASE_ADDR	(MXC91231_AIPS2_BASE_ADDR + 0xE4000)
+#define MXC91231_WDOG2_BASE_ADDR	(MXC91231_AIPS2_BASE_ADDR + 0xE8000)
+#define MXC91231_RTIC_BASE_ADDR		(MXC91231_AIPS2_BASE_ADDR + 0xEC000)
+#define MXC91231_LPMC_BASE_ADDR		(MXC91231_AIPS2_BASE_ADDR + 0xF0000)
+
+/*
+ * SPBA global module 0
+ */
+#define MXC91231_SPBA0_BASE_ADDR	0x50000000
+#define MXC91231_SPBA0_BASE_ADDR_VIRT	0xFC200000
+#define MXC91231_SPBA0_SIZE		SZ_1M
+
+#define MXC91231_MMC_SDHC1_BASE_ADDR	(MXC91231_SPBA0_BASE_ADDR + 0x04000)
+#define MXC91231_MMC_SDHC2_BASE_ADDR	(MXC91231_SPBA0_BASE_ADDR + 0x08000)
+#define MXC91231_UART3_BASE_ADDR	(MXC91231_SPBA0_BASE_ADDR + 0x0C000)
+#define MXC91231_CSPI2_BASE_ADDR	(MXC91231_SPBA0_BASE_ADDR + 0x10000)
+#define MXC91231_SSI2_BASE_ADDR		(MXC91231_SPBA0_BASE_ADDR + 0x14000)
+#define MXC91231_SIM_BASE_ADDR		(MXC91231_SPBA0_BASE_ADDR + 0x18000)
+#define MXC91231_IIM_BASE_ADDR		(MXC91231_SPBA0_BASE_ADDR + 0x1C000)
+#define MXC91231_CTI_SDMA_BASE_ADDR	(MXC91231_SPBA0_BASE_ADDR + 0x20000)
+#define MXC91231_USBOTG_CTRL_BASE_ADDR	(MXC91231_SPBA0_BASE_ADDR + 0x24000)
+#define MXC91231_USBOTG_DATA_BASE_ADDR	(MXC91231_SPBA0_BASE_ADDR + 0x28000)
+#define MXC91231_CSPI1_BASE_ADDR	(MXC91231_SPBA0_BASE_ADDR + 0x30000)
+#define MXC91231_SPBA_CTRL_BASE_ADDR	(MXC91231_SPBA0_BASE_ADDR + 0x3C000)
+#define MXC91231_IOMUX_COM_BASE_ADDR	(MXC91231_SPBA0_BASE_ADDR + 0x40000)
+#define MXC91231_CRM_COM_BASE_ADDR	(MXC91231_SPBA0_BASE_ADDR + 0x44000)
+#define MXC91231_CRM_AP_BASE_ADDR	(MXC91231_SPBA0_BASE_ADDR + 0x48000)
+#define MXC91231_PLL0_BASE_ADDR		(MXC91231_SPBA0_BASE_ADDR + 0x4C000)
+#define MXC91231_PLL1_BASE_ADDR		(MXC91231_SPBA0_BASE_ADDR + 0x50000)
+#define MXC91231_PLL2_BASE_ADDR		(MXC91231_SPBA0_BASE_ADDR + 0x54000)
+#define MXC91231_GPIO4_SH_BASE_ADDR	(MXC91231_SPBA0_BASE_ADDR + 0x58000)
+#define MXC91231_HAC_BASE_ADDR		(MXC91231_SPBA0_BASE_ADDR + 0x5C000)
+#define MXC91231_SAHARA_BASE_ADDR	(MXC91231_SPBA0_BASE_ADDR + 0x5C000)
+#define MXC91231_PLL3_BASE_ADDR		(MXC91231_SPBA0_BASE_ADDR + 0x60000)
+
+/*
+ * SPBA global module 1
+ */
+#define MXC91231_SPBA1_BASE_ADDR	0x52000000
+#define MXC91231_SPBA1_BASE_ADDR_VIRT	0xFC300000
+#define MXC91231_SPBA1_SIZE		SZ_1M
+
+#define MXC91231_MQSPI_BASE_ADDR	(MXC91231_SPBA1_BASE_ADDR + 0x34000)
+#define MXC91231_EL1T_BASE_ADDR		(MXC91231_SPBA1_BASE_ADDR + 0x38000)
+
+/*!
+ * Defines for SPBA modules
+ */
+#define MXC91231_SPBA_SDHC1		0x04
+#define MXC91231_SPBA_SDHC2		0x08
+#define MXC91231_SPBA_UART3		0x0C
+#define MXC91231_SPBA_CSPI2		0x10
+#define MXC91231_SPBA_SSI2		0x14
+#define MXC91231_SPBA_SIM		0x18
+#define MXC91231_SPBA_IIM		0x1C
+#define MXC91231_SPBA_CTI_SDMA		0x20
+#define MXC91231_SPBA_USBOTG_CTRL_REGS	0x24
+#define MXC91231_SPBA_USBOTG_DATA_REGS	0x28
+#define MXC91231_SPBA_CSPI1		0x30
+#define MXC91231_SPBA_MQSPI		0x34
+#define MXC91231_SPBA_EL1T		0x38
+#define MXC91231_SPBA_IOMUX		0x40
+#define MXC91231_SPBA_CRM_COM		0x44
+#define MXC91231_SPBA_CRM_AP		0x48
+#define MXC91231_SPBA_PLL0		0x4C
+#define MXC91231_SPBA_PLL1		0x50
+#define MXC91231_SPBA_PLL2		0x54
+#define MXC91231_SPBA_GPIO4		0x58
+#define MXC91231_SPBA_SAHARA		0x5C
+
+/*
+ * ROMP and AVIC
+ */
+#define MXC91231_ROMP_BASE_ADDR		0x60000000
+#define MXC91231_ROMP_BASE_ADDR_VIRT	0xFC400000
+#define MXC91231_ROMP_SIZE		SZ_64K
+
+#define MXC91231_AVIC_BASE_ADDR		0x68000000
+#define MXC91231_AVIC_BASE_ADDR_VIRT	0xFC410000
+#define MXC91231_AVIC_SIZE		SZ_64K
+
+/*
+ * NAND, SDRAM, WEIM, M3IF, EMI controllers
+ */
+#define MXC91231_X_MEMC_BASE_ADDR	0xB8000000
+#define MXC91231_X_MEMC_BASE_ADDR_VIRT	0xFC420000
+#define MXC91231_X_MEMC_SIZE		SZ_64K
+
+#define MXC91231_NFC_BASE_ADDR		(MXC91231_X_MEMC_BASE_ADDR + 0x0000)
+#define MXC91231_ESDCTL_BASE_ADDR	(MXC91231_X_MEMC_BASE_ADDR + 0x1000)
+#define MXC91231_WEIM_BASE_ADDR		(MXC91231_X_MEMC_BASE_ADDR + 0x2000)
+#define MXC91231_M3IF_BASE_ADDR		(MXC91231_X_MEMC_BASE_ADDR + 0x3000)
+#define MXC91231_EMI_CTL_BASE_ADDR	(MXC91231_X_MEMC_BASE_ADDR + 0x4000)
+
+/*
+ * Memory regions and CS
+ * CPLD is connected on CS4
+ * CS5 is TP1021 or it is not connected
+ * */
+#define MXC91231_FB_RAM_BASE_ADDR	0x78000000
+#define MXC91231_FB_RAM_SIZE		SZ_256K
+#define MXC91231_CSD0_BASE_ADDR		0x80000000
+#define MXC91231_CSD1_BASE_ADDR		0x90000000
+#define MXC91231_CS0_BASE_ADDR		0xA0000000
+#define MXC91231_CS1_BASE_ADDR		0xA8000000
+#define MXC91231_CS2_BASE_ADDR		0xB0000000
+#define MXC91231_CS3_BASE_ADDR		0xB2000000
+#define MXC91231_CS4_BASE_ADDR		0xB4000000
+#define MXC91231_CS5_BASE_ADDR		0xB6000000
+
+/* Is given address belongs to the specified memory region? */
+#define ADDRESS_IN_REGION(addr, start, size) \
+	(((addr) >= (start)) && ((addr) < (start)+(size)))
+
+/* Is given address belongs to the specified named `module'? */
+#define MXC91231_IS_MODULE(addr, module) \
+	ADDRESS_IN_REGION(addr, MXC91231_ ## module ## _BASE_ADDR, \
+	                        MXC91231_ ## module ## _SIZE)
+/*
+ * This macro defines the physical to virtual address mapping for all the
+ * peripheral modules. It is used by passing in the physical address as x
+ * and returning the virtual address. If the physical address is not mapped,
+ * it returns 0xDEADBEEF
+ */
+
+#define MXC91231_IO_ADDRESS(x) \
+	(void __iomem *) \
+	(MXC91231_IS_MODULE(x, L2CC) ? MXC91231_L2CC_IO_ADDRESS(x) : \
+	 MXC91231_IS_MODULE(x, AIPS1) ? MXC91231_AIPS1_IO_ADDRESS(x) : \
+	 MXC91231_IS_MODULE(x, AIPS2) ? MXC91231_AIPS2_IO_ADDRESS(x) : \
+	 MXC91231_IS_MODULE(x, SPBA0) ? MXC91231_SPBA0_IO_ADDRESS(x) : \
+	 MXC91231_IS_MODULE(x, SPBA1) ? MXC91231_SPBA1_IO_ADDRESS(x) : \
+	 MXC91231_IS_MODULE(x, ROMP) ? MXC91231_ROMP_IO_ADDRESS(x) : \
+	 MXC91231_IS_MODULE(x, AVIC) ? MXC91231_AVIC_IO_ADDRESS(x) : \
+	 MXC91231_IS_MODULE(x, X_MEMC) ? MXC91231_X_MEMC_IO_ADDRESS(x) : \
+	 0xDEADBEEF)
+
+
+/*
+ * define the address mapping macros: in physical address order
+ */
+#define MXC91231_L2CC_IO_ADDRESS(x)  \
+	(((x) - MXC91231_L2CC_BASE_ADDR) + MXC91231_L2CC_BASE_ADDR_VIRT)
+
+#define MXC91231_AIPS1_IO_ADDRESS(x)  \
+	(((x) - MXC91231_AIPS1_BASE_ADDR) + MXC91231_AIPS1_BASE_ADDR_VIRT)
+
+#define MXC91231_SPBA0_IO_ADDRESS(x)  \
+	(((x) - MXC91231_SPBA0_BASE_ADDR) + MXC91231_SPBA0_BASE_ADDR_VIRT)
+
+#define MXC91231_SPBA1_IO_ADDRESS(x)  \
+	(((x) - MXC91231_SPBA1_BASE_ADDR) + MXC91231_SPBA1_BASE_ADDR_VIRT)
+
+#define MXC91231_AIPS2_IO_ADDRESS(x)  \
+	(((x) - MXC91231_AIPS2_BASE_ADDR) + MXC91231_AIPS2_BASE_ADDR_VIRT)
+
+#define MXC91231_ROMP_IO_ADDRESS(x)  \
+	(((x) - MXC91231_ROMP_BASE_ADDR) + MXC91231_ROMP_BASE_ADDR_VIRT)
+
+#define MXC91231_AVIC_IO_ADDRESS(x)  \
+	(((x) - MXC91231_AVIC_BASE_ADDR) + MXC91231_AVIC_BASE_ADDR_VIRT)
+
+#define MXC91231_X_MEMC_IO_ADDRESS(x)  \
+	(((x) - MXC91231_X_MEMC_BASE_ADDR) + MXC91231_X_MEMC_BASE_ADDR_VIRT)
+
+/*
+ * Interrupt numbers
+ */
+#define MXC91231_INT_GPIO3		0
+#define MXC91231_INT_EL1T_CI		1
+#define MXC91231_INT_EL1T_RFCI		2
+#define MXC91231_INT_EL1T_RFI		3
+#define MXC91231_INT_EL1T_MCU		4
+#define MXC91231_INT_EL1T_IPI		5
+#define MXC91231_INT_MU_GEN		6
+#define MXC91231_INT_GPIO4		7
+#define MXC91231_INT_MMC_SDHC2		8
+#define MXC91231_INT_MMC_SDHC1		9
+#define MXC91231_INT_I2C		10
+#define MXC91231_INT_SSI2		11
+#define MXC91231_INT_SSI1		12
+#define MXC91231_INT_CSPI2		13
+#define MXC91231_INT_CSPI1		14
+#define MXC91231_INT_RTIC		15
+#define MXC91231_INT_SAHARA		15
+#define MXC91231_INT_HAC		15
+#define MXC91231_INT_UART3_RX		16
+#define MXC91231_INT_UART3_TX		17
+#define MXC91231_INT_UART3_MINT		18
+#define MXC91231_INT_ECT		19
+#define MXC91231_INT_SIM_IPB		20
+#define MXC91231_INT_SIM_DATA		21
+#define MXC91231_INT_RNGA		22
+#define MXC91231_INT_DSM_AP		23
+#define MXC91231_INT_KPP		24
+#define MXC91231_INT_RTC		25
+#define MXC91231_INT_PWM		26
+#define MXC91231_INT_GEMK_AP		27
+#define MXC91231_INT_EPIT		28
+#define MXC91231_INT_GPT		29
+#define MXC91231_INT_UART2_RX		30
+#define MXC91231_INT_UART2_TX		31
+#define MXC91231_INT_UART2_MINT		32
+#define MXC91231_INT_NANDFC		33
+#define MXC91231_INT_SDMA		34
+#define MXC91231_INT_USB_WAKEUP		35
+#define MXC91231_INT_USB_SOF		36
+#define MXC91231_INT_PMU_EVTMON		37
+#define MXC91231_INT_USB_FUNC		38
+#define MXC91231_INT_USB_DMA		39
+#define MXC91231_INT_USB_CTRL		40
+#define MXC91231_INT_IPU_ERR		41
+#define MXC91231_INT_IPU_SYN		42
+#define MXC91231_INT_UART1_RX		43
+#define MXC91231_INT_UART1_TX		44
+#define MXC91231_INT_UART1_MINT		45
+#define MXC91231_INT_IIM		46
+#define MXC91231_INT_MU_RX_OR		47
+#define MXC91231_INT_MU_TX_OR		48
+#define MXC91231_INT_SCC_SCM		49
+#define MXC91231_INT_SCC_SMN		50
+#define MXC91231_INT_GPIO2		51
+#define MXC91231_INT_GPIO1		52
+#define MXC91231_INT_MQSPI1		53
+#define MXC91231_INT_MQSPI2		54
+#define MXC91231_INT_WDOG2		55
+#define MXC91231_INT_EXT_INT7		56
+#define MXC91231_INT_EXT_INT6		57
+#define MXC91231_INT_EXT_INT5		58
+#define MXC91231_INT_EXT_INT4		59
+#define MXC91231_INT_EXT_INT3		60
+#define MXC91231_INT_EXT_INT2		61
+#define MXC91231_INT_EXT_INT1		62
+#define MXC91231_INT_EXT_INT0		63
+
+#define MXC91231_MAX_INT_LINES		63
+#define MXC91231_MAX_EXT_LINES		8
+
+#endif /* __MACH_MXC91231_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/system.h b/arch/arm/plat-mxc/include/mach/system.h
index e56241af870..ef00199568d 100644
--- a/arch/arm/plat-mxc/include/mach/system.h
+++ b/arch/arm/plat-mxc/include/mach/system.h
@@ -21,8 +21,18 @@
 #ifndef __ASM_ARCH_MXC_SYSTEM_H__
 #define __ASM_ARCH_MXC_SYSTEM_H__
 
+#include <mach/hardware.h>
+#include <mach/common.h>
+
 static inline void arch_idle(void)
 {
+#ifdef CONFIG_ARCH_MXC91231
+	if (cpu_is_mxc91231()) {
+		/* Need this to set DSM low-power mode */
+		mxc91231_prepare_idle();
+	}
+#endif
+
 	cpu_do_idle();
 }
 
diff --git a/arch/arm/plat-mxc/include/mach/timex.h b/arch/arm/plat-mxc/include/mach/timex.h
index 0707b7d5b5c..527a6c24788 100644
--- a/arch/arm/plat-mxc/include/mach/timex.h
+++ b/arch/arm/plat-mxc/include/mach/timex.h
@@ -28,6 +28,8 @@
 #define CLOCK_TICK_RATE		16625000
 #elif defined CONFIG_ARCH_MX25
 #define CLOCK_TICK_RATE		16000000
+#elif defined CONFIG_ARCH_MXC91231
+#define CLOCK_TICK_RATE		13000000
 #endif
 
 #endif				/* __ASM_ARCH_MXC_TIMEX_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h
index 1e24499f20b..082a3908256 100644
--- a/arch/arm/plat-mxc/include/mach/uncompress.h
+++ b/arch/arm/plat-mxc/include/mach/uncompress.h
@@ -66,6 +66,7 @@ static void putc(int ch)
 #define MX25_UART1_BASE_ADDR	0x43f90000
 #define MX2X_UART1_BASE_ADDR	0x1000a000
 #define MX3X_UART1_BASE_ADDR	0x43F90000
+#define MX3X_UART2_BASE_ADDR	0x43F94000
 
 static __inline__ void __arch_decomp_setup(unsigned long arch_id)
 {
@@ -95,6 +96,9 @@ static __inline__ void __arch_decomp_setup(unsigned long arch_id)
 	case MACH_TYPE_PCM043:
 		uart_base = MX3X_UART1_BASE_ADDR;
 		break;
+	case MACH_TYPE_MAGX_ZN5:
+		uart_base = MX3X_UART2_BASE_ADDR;
+		break;
 	default:
 		break;
 	}
diff --git a/arch/arm/plat-mxc/system.c b/arch/arm/plat-mxc/system.c
index 15e30532f4a..97f42799fa5 100644
--- a/arch/arm/plat-mxc/system.c
+++ b/arch/arm/plat-mxc/system.c
@@ -27,6 +27,7 @@
 #include <linux/delay.h>
 
 #include <mach/hardware.h>
+#include <mach/common.h>
 #include <asm/proc-fns.h>
 #include <asm/system.h>
 
@@ -39,6 +40,12 @@ void arch_reset(char mode, const char *cmd)
 {
 	unsigned int wcr_enable;
 
+#ifdef CONFIG_ARCH_MXC91231
+	if (cpu_is_mxc91231()) {
+		mxc91231_arch_reset(mode, cmd);
+		return;
+	}
+#endif
 	if (cpu_is_mx1()) {
 		wcr_enable = (1 << 0);
 	} else {
diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c
index 59e33a3bf7f..844567ee35f 100644
--- a/arch/arm/plat-mxc/time.c
+++ b/arch/arm/plat-mxc/time.c
@@ -47,7 +47,7 @@
 #define MX2_TSTAT_CAPT		(1 << 1)
 #define MX2_TSTAT_COMP		(1 << 0)
 
-/* MX31, MX35, MX25 */
+/* MX31, MX35, MX25, MXC91231 */
 #define MX3_TCTL_WAITEN		(1 << 3)
 #define MX3_TCTL_CLK_IPG	(1 << 6)
 #define MX3_TCTL_FRR		(1 << 9)
-- 
cgit v1.2.3


From 94da274b4982f5b36b55bde0c76d3ef8233bceda Mon Sep 17 00:00:00 2001
From: Dmitriy Taychenachev <dimichxp@gmail.com>
Date: Fri, 31 Jul 2009 20:29:23 +0900
Subject: MXC: add iomux pins configuration support for MXC91231

Signed-off-by: Dmitriy Taychenachev <dimichxp@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mxc91231/Makefile                 |   2 +-
 arch/arm/mach-mxc91231/iomux.c                  | 177 +++++++++++++++
 arch/arm/mach-mxc91231/magx-zn5.c               |   4 +
 arch/arm/plat-mxc/include/mach/iomux-mxc91231.h | 287 ++++++++++++++++++++++++
 4 files changed, 469 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/mach-mxc91231/iomux.c
 create mode 100644 arch/arm/plat-mxc/include/mach/iomux-mxc91231.h

(limited to 'arch')

diff --git a/arch/arm/mach-mxc91231/Makefile b/arch/arm/mach-mxc91231/Makefile
index eb70b669c55..011d5e19712 100644
--- a/arch/arm/mach-mxc91231/Makefile
+++ b/arch/arm/mach-mxc91231/Makefile
@@ -1,2 +1,2 @@
-obj-y	:= mm.o clock.o devices.o system.o
+obj-y	:= mm.o clock.o devices.o system.o iomux.o
 obj-$(CONFIG_MACH_MAGX_ZN5) += magx-zn5.o
diff --git a/arch/arm/mach-mxc91231/iomux.c b/arch/arm/mach-mxc91231/iomux.c
new file mode 100644
index 00000000000..405d9b19d89
--- /dev/null
+++ b/arch/arm/mach-mxc91231/iomux.c
@@ -0,0 +1,177 @@
+/*
+ * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ * Copyright (C) 2009 by Valentin Longchamp <valentin.longchamp@epfl.ch>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <mach/hardware.h>
+#include <mach/gpio.h>
+#include <mach/iomux-mxc91231.h>
+
+/*
+ * IOMUX register (base) addresses
+ */
+#define IOMUX_AP_BASE		MXC91231_IO_ADDRESS(MXC91231_IOMUX_AP_BASE_ADDR)
+#define IOMUX_COM_BASE		MXC91231_IO_ADDRESS(MXC91231_IOMUX_COM_BASE_ADDR)
+#define IOMUXSW_AP_MUX_CTL	(IOMUX_AP_BASE + 0x000)
+#define IOMUXSW_SP_MUX_CTL	(IOMUX_COM_BASE + 0x000)
+#define IOMUXSW_PAD_CTL		(IOMUX_COM_BASE + 0x200)
+
+#define IOMUXINT_OBS1		(IOMUX_AP_BASE + 0x600)
+#define IOMUXINT_OBS2		(IOMUX_AP_BASE + 0x004)
+
+static DEFINE_SPINLOCK(gpio_mux_lock);
+
+#define NB_PORTS			((PIN_MAX + 32) / 32)
+#define PIN_GLOBAL_NUM(pin) \
+	(((pin & MUX_SIDE_MASK) >> MUX_SIDE_SHIFT)*PIN_AP_MAX +	\
+	 ((pin & MUX_REG_MASK) >> MUX_REG_SHIFT)*4 +		\
+	 ((pin & MUX_FIELD_MASK) >> MUX_FIELD_SHIFT))
+
+unsigned long mxc_pin_alloc_map[NB_PORTS * 32 / BITS_PER_LONG];
+/*
+ * set the mode for a IOMUX pin.
+ */
+int mxc_iomux_mode(const unsigned int pin_mode)
+{
+	u32 side, field, l, mode, ret = 0;
+	void __iomem *reg;
+
+	side = (pin_mode & MUX_SIDE_MASK) >> MUX_SIDE_SHIFT;
+	switch (side) {
+	case MUX_SIDE_AP:
+		reg = IOMUXSW_AP_MUX_CTL;
+		break;
+	case MUX_SIDE_SP:
+		reg = IOMUXSW_SP_MUX_CTL;
+		break;
+	default:
+		return -EINVAL;
+	}
+	reg += ((pin_mode & MUX_REG_MASK) >> MUX_REG_SHIFT) * 4;
+	field = (pin_mode & MUX_FIELD_MASK) >> MUX_FIELD_SHIFT;
+	mode = (pin_mode & MUX_MODE_MASK) >> MUX_MODE_SHIFT;
+
+	spin_lock(&gpio_mux_lock);
+
+	l = __raw_readl(reg);
+	l &= ~(0xff << (field * 8));
+	l |= mode << (field * 8);
+	__raw_writel(l, reg);
+
+	spin_unlock(&gpio_mux_lock);
+
+	return ret;
+}
+EXPORT_SYMBOL(mxc_iomux_mode);
+
+/*
+ * This function configures the pad value for a IOMUX pin.
+ */
+void mxc_iomux_set_pad(enum iomux_pins pin, u32 config)
+{
+	u32 padgrp, field, l;
+	void __iomem *reg;
+
+	padgrp = (pin & MUX_PADGRP_MASK) >> MUX_PADGRP_SHIFT;
+	reg = IOMUXSW_PAD_CTL + (pin + 2) / 3 * 4;
+	field = (pin + 2) % 3;
+
+	pr_debug("%s: reg offset = 0x%x, field = %d\n",
+			__func__, (pin + 2) / 3, field);
+
+	spin_lock(&gpio_mux_lock);
+
+	l = __raw_readl(reg);
+	l &= ~(0x1ff << (field * 10));
+	l |= config << (field * 10);
+	__raw_writel(l, reg);
+
+	spin_unlock(&gpio_mux_lock);
+}
+EXPORT_SYMBOL(mxc_iomux_set_pad);
+
+/*
+ * allocs a single pin:
+ * 	- reserves the pin so that it is not claimed by another driver
+ * 	- setups the iomux according to the configuration
+ */
+int mxc_iomux_alloc_pin(const unsigned int pin_mode, const char *label)
+{
+	unsigned pad = PIN_GLOBAL_NUM(pin_mode);
+	if (pad >= (PIN_MAX + 1)) {
+		printk(KERN_ERR "mxc_iomux: Attempt to request nonexistant pin %u for \"%s\"\n",
+			pad, label ? label : "?");
+		return -EINVAL;
+	}
+
+	if (test_and_set_bit(pad, mxc_pin_alloc_map)) {
+		printk(KERN_ERR "mxc_iomux: pin %u already used. Allocation for \"%s\" failed\n",
+			pad, label ? label : "?");
+		return -EBUSY;
+	}
+	mxc_iomux_mode(pin_mode);
+
+	return 0;
+}
+EXPORT_SYMBOL(mxc_iomux_alloc_pin);
+
+int mxc_iomux_setup_multiple_pins(unsigned int *pin_list, unsigned count,
+		const char *label)
+{
+	unsigned int *p = pin_list;
+	int i;
+	int ret = -EINVAL;
+
+	for (i = 0; i < count; i++) {
+		ret = mxc_iomux_alloc_pin(*p, label);
+		if (ret)
+			goto setup_error;
+		p++;
+	}
+	return 0;
+
+setup_error:
+	mxc_iomux_release_multiple_pins(pin_list, i);
+	return ret;
+}
+EXPORT_SYMBOL(mxc_iomux_setup_multiple_pins);
+
+void mxc_iomux_release_pin(const unsigned int pin_mode)
+{
+	unsigned pad = PIN_GLOBAL_NUM(pin_mode);
+
+	if (pad < (PIN_MAX + 1))
+		clear_bit(pad, mxc_pin_alloc_map);
+}
+EXPORT_SYMBOL(mxc_iomux_release_pin);
+
+void mxc_iomux_release_multiple_pins(unsigned int *pin_list, int count)
+{
+	unsigned int *p = pin_list;
+	int i;
+
+	for (i = 0; i < count; i++) {
+		mxc_iomux_release_pin(*p);
+		p++;
+	}
+}
+EXPORT_SYMBOL(mxc_iomux_release_multiple_pins);
diff --git a/arch/arm/mach-mxc91231/magx-zn5.c b/arch/arm/mach-mxc91231/magx-zn5.c
index 8757573b0a8..7dbe4ca12ef 100644
--- a/arch/arm/mach-mxc91231/magx-zn5.c
+++ b/arch/arm/mach-mxc91231/magx-zn5.c
@@ -14,6 +14,7 @@
 
 #include <mach/common.h>
 #include <mach/hardware.h>
+#include <mach/iomux-mxc91231.h>
 #include <mach/mmc.h>
 #include <mach/imx-uart.h>
 
@@ -29,6 +30,9 @@ static void __init zn5_init(void)
 {
 	pm_power_off = mxc91231_power_off;
 
+	mxc_iomux_alloc_pin(MXC91231_PIN_SP_USB_DAT_VP__RXD2, "uart2-rx");
+	mxc_iomux_alloc_pin(MXC91231_PIN_SP_USB_SE0_VM__TXD2, "uart2-tx");
+
 	mxc_register_device(&mxc_uart_device1, &uart_pdata);
 	mxc_register_device(&mxc_uart_device0, &uart_pdata);
 
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h b/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h
new file mode 100644
index 00000000000..9f13061192c
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h
@@ -0,0 +1,287 @@
+/*
+ * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ * Copyright (C) 2009 by Dmitriy Taychenachev <dimichxp@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __MACH_IOMUX_MXC91231_H__
+#define __MACH_IOMUX_MXC91231_H__
+
+/*
+ * various IOMUX output functions
+ */
+
+#define	IOMUX_OCONFIG_GPIO (0 << 4)	/* used as GPIO */
+#define	IOMUX_OCONFIG_FUNC (1 << 4)	/* used as function */
+#define	IOMUX_OCONFIG_ALT1 (2 << 4)	/* used as alternate function 1 */
+#define	IOMUX_OCONFIG_ALT2 (3 << 4)	/* used as alternate function 2 */
+#define	IOMUX_OCONFIG_ALT3 (4 << 4)	/* used as alternate function 3 */
+#define	IOMUX_OCONFIG_ALT4 (5 << 4)	/* used as alternate function 4 */
+#define	IOMUX_OCONFIG_ALT5 (6 << 4)	/* used as alternate function 5 */
+#define	IOMUX_OCONFIG_ALT6 (7 << 4)	/* used as alternate function 6 */
+#define	IOMUX_ICONFIG_NONE  0	 	/* not configured for input */
+#define	IOMUX_ICONFIG_GPIO  1		/* used as GPIO */
+#define	IOMUX_ICONFIG_FUNC  2		/* used as function */
+#define	IOMUX_ICONFIG_ALT1  4		/* used as alternate function 1 */
+#define	IOMUX_ICONFIG_ALT2  8		/* used as alternate function 2 */
+
+#define IOMUX_CONFIG_GPIO (IOMUX_OCONFIG_GPIO | IOMUX_ICONFIG_GPIO)
+#define IOMUX_CONFIG_FUNC (IOMUX_OCONFIG_FUNC | IOMUX_ICONFIG_FUNC)
+#define IOMUX_CONFIG_ALT1 (IOMUX_OCONFIG_ALT1 | IOMUX_ICONFIG_ALT1)
+#define IOMUX_CONFIG_ALT2 (IOMUX_OCONFIG_ALT2 | IOMUX_ICONFIG_ALT2)
+
+/*
+ * setups a single pin:
+ * 	- reserves the pin so that it is not claimed by another driver
+ * 	- setups the iomux according to the configuration
+ * 	- if the pin is configured as a GPIO, we claim it throug kernel gpiolib
+ */
+int mxc_iomux_alloc_pin(const unsigned int pin_mode, const char *label);
+/*
+ * setups mutliple pins
+ * convenient way to call the above function with tables
+ */
+int mxc_iomux_setup_multiple_pins(unsigned int *pin_list, unsigned count,
+		const char *label);
+
+/*
+ * releases a single pin:
+ * 	- make it available for a future use by another driver
+ * 	- frees the GPIO if the pin was configured as GPIO
+ * 	- DOES NOT reconfigure the IOMUX in its reset state
+ */
+void mxc_iomux_release_pin(const unsigned int pin_mode);
+/*
+ * releases multiple pins
+ * convenvient way to call the above function with tables
+ */
+void mxc_iomux_release_multiple_pins(unsigned int *pin_list, int count);
+
+#define MUX_SIDE_AP		(0)
+#define MUX_SIDE_SP		(1)
+
+#define MUX_SIDE_SHIFT		(26)
+#define MUX_SIDE_MASK		(0x1 << MUX_SIDE_SHIFT)
+
+#define MUX_GPIO_PORT_SHIFT	(23)
+#define MUX_GPIO_PORT_MASK	(0x7 << MUX_GPIO_PORT_SHIFT)
+
+#define MUX_GPIO_PIN_SHIFT	(20)
+#define MUX_GPIO_PIN_MASK	(0x1f << MUX_GPIO_PIN_SHIFT)
+
+#define MUX_REG_SHIFT		(15)
+#define MUX_REG_MASK		(0x1f << MUX_REG_SHIFT)
+
+#define MUX_FIELD_SHIFT		(13)
+#define MUX_FIELD_MASK		(0x3 << MUX_FIELD_SHIFT)
+
+#define MUX_PADGRP_SHIFT	(8)
+#define MUX_PADGRP_MASK		(0x1f << MUX_PADGRP_SHIFT)
+
+#define MUX_PIN_MASK		(0xffffff << 8)
+
+#define GPIO_PORT_MAX		(3)
+
+#define IOMUX_PIN(side, gport, gpin, ctlreg, ctlfield, padgrp) \
+	(((side) << MUX_SIDE_SHIFT) |		  \
+	 (gport << MUX_GPIO_PORT_SHIFT) |		\
+	 ((gpin) << MUX_GPIO_PIN_SHIFT) |		\
+	 ((ctlreg) << MUX_REG_SHIFT) |		\
+	 ((ctlfield) << MUX_FIELD_SHIFT) |		\
+	 ((padgrp) << MUX_PADGRP_SHIFT))
+
+#define MUX_MODE_OUT_SHIFT	(4)
+#define MUX_MODE_IN_SHIFT	(0)
+#define MUX_MODE_SHIFT		(0)
+#define MUX_MODE_MASK		(0xff << MUX_MODE_SHIFT)
+
+#define IOMUX_MODE(pin, mode) \
+	(pin | (mode << MUX_MODE_SHIFT))
+
+enum iomux_pins {
+	/* AP Side pins */
+	MXC91231_PIN_AP_CLE		= IOMUX_PIN(0, 0,  0,  0, 0, 24),
+	MXC91231_PIN_AP_ALE		= IOMUX_PIN(0, 0,  1,  0, 1, 24),
+	MXC91231_PIN_AP_CE_B		= IOMUX_PIN(0, 0,  2,  0, 2, 24),
+	MXC91231_PIN_AP_RE_B		= IOMUX_PIN(0, 0,  3,  0, 3, 24),
+	MXC91231_PIN_AP_WE_B		= IOMUX_PIN(0, 0,  4,  1, 0, 24),
+	MXC91231_PIN_AP_WP_B		= IOMUX_PIN(0, 0,  5,  1, 1, 24),
+	MXC91231_PIN_AP_BSY_B		= IOMUX_PIN(0, 0,  6,  1, 2, 24),
+	MXC91231_PIN_AP_U1_TXD		= IOMUX_PIN(0, 0,  7,  1, 3, 28),
+	MXC91231_PIN_AP_U1_RXD		= IOMUX_PIN(0, 0,  8,  2, 0, 28),
+	MXC91231_PIN_AP_U1_RTS_B	= IOMUX_PIN(0, 0,  9,  2, 1, 28),
+	MXC91231_PIN_AP_U1_CTS_B	= IOMUX_PIN(0, 0, 10,  2, 2, 28),
+	MXC91231_PIN_AP_AD1_TXD		= IOMUX_PIN(0, 0, 11,  2, 3,  9),
+	MXC91231_PIN_AP_AD1_RXD		= IOMUX_PIN(0, 0, 12,  3, 0,  9),
+	MXC91231_PIN_AP_AD1_TXC		= IOMUX_PIN(0, 0, 13,  3, 1,  9),
+	MXC91231_PIN_AP_AD1_TXFS	= IOMUX_PIN(0, 0, 14,  3, 2,  9),
+	MXC91231_PIN_AP_AD2_TXD		= IOMUX_PIN(0, 0, 15,  3, 3,  9),
+	MXC91231_PIN_AP_AD2_RXD		= IOMUX_PIN(0, 0, 16,  4, 0,  9),
+	MXC91231_PIN_AP_AD2_TXC		= IOMUX_PIN(0, 0, 17,  4, 1,  9),
+	MXC91231_PIN_AP_AD2_TXFS	= IOMUX_PIN(0, 0, 18,  4, 2,  9),
+	MXC91231_PIN_AP_OWDAT		= IOMUX_PIN(0, 0, 19,  4, 3, 28),
+	MXC91231_PIN_AP_IPU_LD17	= IOMUX_PIN(0, 0, 20,  5, 0, 28),
+	MXC91231_PIN_AP_IPU_D3_VSYNC	= IOMUX_PIN(0, 0, 21,  5, 1, 28),
+	MXC91231_PIN_AP_IPU_D3_HSYNC	= IOMUX_PIN(0, 0, 22,  5, 2, 28),
+	MXC91231_PIN_AP_IPU_D3_CLK	= IOMUX_PIN(0, 0, 23,  5, 3, 28),
+	MXC91231_PIN_AP_IPU_D3_DRDY	= IOMUX_PIN(0, 0, 24,  6, 0, 28),
+	MXC91231_PIN_AP_IPU_D3_CONTR	= IOMUX_PIN(0, 0, 25,  6, 1, 28),
+	MXC91231_PIN_AP_IPU_D0_CS	= IOMUX_PIN(0, 0, 26,  6, 2, 28),
+	MXC91231_PIN_AP_IPU_LD16	= IOMUX_PIN(0, 0, 27,  6, 3, 28),
+	MXC91231_PIN_AP_IPU_D2_CS	= IOMUX_PIN(0, 0, 28,  7, 0, 28),
+	MXC91231_PIN_AP_IPU_PAR_RS	= IOMUX_PIN(0, 0, 29,  7, 1, 28),
+	MXC91231_PIN_AP_IPU_D3_PS	= IOMUX_PIN(0, 0, 30,  7, 2, 28),
+	MXC91231_PIN_AP_IPU_D3_CLS	= IOMUX_PIN(0, 0, 31,  7, 3, 28),
+	MXC91231_PIN_AP_IPU_RD		= IOMUX_PIN(0, 1,  0,  8, 0, 28),
+	MXC91231_PIN_AP_IPU_WR		= IOMUX_PIN(0, 1,  1,  8, 1, 28),
+	MXC91231_PIN_AP_IPU_LD0		= IOMUX_PIN(0, 7,  0,  8, 2, 28),
+	MXC91231_PIN_AP_IPU_LD1		= IOMUX_PIN(0, 7,  0,  8, 3, 28),
+	MXC91231_PIN_AP_IPU_LD2		= IOMUX_PIN(0, 7,  0,  9, 0, 28),
+	MXC91231_PIN_AP_IPU_LD3		= IOMUX_PIN(0, 1,  2,  9, 1, 28),
+	MXC91231_PIN_AP_IPU_LD4		= IOMUX_PIN(0, 1,  3,  9, 2, 28),
+	MXC91231_PIN_AP_IPU_LD5		= IOMUX_PIN(0, 1,  4,  9, 3, 28),
+	MXC91231_PIN_AP_IPU_LD6		= IOMUX_PIN(0, 1,  5, 10, 0, 28),
+	MXC91231_PIN_AP_IPU_LD7		= IOMUX_PIN(0, 1,  6, 10, 1, 28),
+	MXC91231_PIN_AP_IPU_LD8		= IOMUX_PIN(0, 1,  7, 10, 2, 28),
+	MXC91231_PIN_AP_IPU_LD9		= IOMUX_PIN(0, 1,  8, 10, 3, 28),
+	MXC91231_PIN_AP_IPU_LD10	= IOMUX_PIN(0, 1,  9, 11, 0, 28),
+	MXC91231_PIN_AP_IPU_LD11	= IOMUX_PIN(0, 1, 10, 11, 1, 28),
+	MXC91231_PIN_AP_IPU_LD12	= IOMUX_PIN(0, 1, 11, 11, 2, 28),
+	MXC91231_PIN_AP_IPU_LD13	= IOMUX_PIN(0, 1, 12, 11, 3, 28),
+	MXC91231_PIN_AP_IPU_LD14	= IOMUX_PIN(0, 1, 13, 12, 0, 28),
+	MXC91231_PIN_AP_IPU_LD15	= IOMUX_PIN(0, 1, 14, 12, 1, 28),
+	MXC91231_PIN_AP_KPROW4		= IOMUX_PIN(0, 7,  0, 12, 2, 10),
+	MXC91231_PIN_AP_KPROW5		= IOMUX_PIN(0, 1, 16, 12, 3, 10),
+	MXC91231_PIN_AP_GPIO_AP_B17	= IOMUX_PIN(0, 1, 17, 13, 0, 10),
+	MXC91231_PIN_AP_GPIO_AP_B18	= IOMUX_PIN(0, 1, 18, 13, 1, 10),
+	MXC91231_PIN_AP_KPCOL3		= IOMUX_PIN(0, 1, 19, 13, 2, 11),
+	MXC91231_PIN_AP_KPCOL4		= IOMUX_PIN(0, 1, 20, 13, 3, 11),
+	MXC91231_PIN_AP_KPCOL5		= IOMUX_PIN(0, 1, 21, 14, 0, 11),
+	MXC91231_PIN_AP_GPIO_AP_B22	= IOMUX_PIN(0, 1, 22, 14, 1, 11),
+	MXC91231_PIN_AP_GPIO_AP_B23	= IOMUX_PIN(0, 1, 23, 14, 2, 11),
+	MXC91231_PIN_AP_CSI_D0		= IOMUX_PIN(0, 1, 24, 14, 3, 21),
+	MXC91231_PIN_AP_CSI_D1		= IOMUX_PIN(0, 1, 25, 15, 0, 21),
+	MXC91231_PIN_AP_CSI_D2		= IOMUX_PIN(0, 1, 26, 15, 1, 21),
+	MXC91231_PIN_AP_CSI_D3		= IOMUX_PIN(0, 1, 27, 15, 2, 21),
+	MXC91231_PIN_AP_CSI_D4		= IOMUX_PIN(0, 1, 28, 15, 3, 21),
+	MXC91231_PIN_AP_CSI_D5		= IOMUX_PIN(0, 1, 29, 16, 0, 21),
+	MXC91231_PIN_AP_CSI_D6		= IOMUX_PIN(0, 1, 30, 16, 1, 21),
+	MXC91231_PIN_AP_CSI_D7		= IOMUX_PIN(0, 1, 31, 16, 2, 21),
+	MXC91231_PIN_AP_CSI_D8		= IOMUX_PIN(0, 2,  0, 16, 3, 21),
+	MXC91231_PIN_AP_CSI_D9		= IOMUX_PIN(0, 2,  1, 17, 0, 21),
+	MXC91231_PIN_AP_CSI_MCLK	= IOMUX_PIN(0, 2,  2, 17, 1, 21),
+	MXC91231_PIN_AP_CSI_VSYNC	= IOMUX_PIN(0, 2,  3, 17, 2, 21),
+	MXC91231_PIN_AP_CSI_HSYNC	= IOMUX_PIN(0, 2,  4, 17, 3, 21),
+	MXC91231_PIN_AP_CSI_PIXCLK	= IOMUX_PIN(0, 2,  5, 18, 0, 21),
+	MXC91231_PIN_AP_I2CLK		= IOMUX_PIN(0, 2,  6, 18, 1, 12),
+	MXC91231_PIN_AP_I2DAT		= IOMUX_PIN(0, 2,  7, 18, 2, 12),
+	MXC91231_PIN_AP_GPIO_AP_C8	= IOMUX_PIN(0, 2,  8, 18, 3,  9),
+	MXC91231_PIN_AP_GPIO_AP_C9	= IOMUX_PIN(0, 2,  9, 19, 0,  9),
+	MXC91231_PIN_AP_GPIO_AP_C10	= IOMUX_PIN(0, 2, 10, 19, 1,  9),
+	MXC91231_PIN_AP_GPIO_AP_C11	= IOMUX_PIN(0, 2, 11, 19, 2,  9),
+	MXC91231_PIN_AP_GPIO_AP_C12	= IOMUX_PIN(0, 2, 12, 19, 3,  9),
+	MXC91231_PIN_AP_GPIO_AP_C13	= IOMUX_PIN(0, 2, 13, 20, 0, 28),
+	MXC91231_PIN_AP_GPIO_AP_C14	= IOMUX_PIN(0, 2, 14, 20, 1, 28),
+	MXC91231_PIN_AP_GPIO_AP_C15	= IOMUX_PIN(0, 2, 15, 20, 2,  9),
+	MXC91231_PIN_AP_GPIO_AP_C16	= IOMUX_PIN(0, 2, 16, 20, 3,  9),
+	MXC91231_PIN_AP_GPIO_AP_C17	= IOMUX_PIN(0, 2, 17, 21, 0,  9),
+	MXC91231_PIN_AP_ED_INT0		= IOMUX_PIN(0, 2, 18, 21, 1, 22),
+	MXC91231_PIN_AP_ED_INT1		= IOMUX_PIN(0, 2, 19, 21, 2, 22),
+	MXC91231_PIN_AP_ED_INT2		= IOMUX_PIN(0, 2, 20, 21, 3, 22),
+	MXC91231_PIN_AP_ED_INT3		= IOMUX_PIN(0, 2, 21, 22, 0, 22),
+	MXC91231_PIN_AP_ED_INT4		= IOMUX_PIN(0, 2, 22, 22, 1, 23),
+	MXC91231_PIN_AP_ED_INT5		= IOMUX_PIN(0, 2, 23, 22, 2, 23),
+	MXC91231_PIN_AP_ED_INT6		= IOMUX_PIN(0, 2, 24, 22, 3, 23),
+	MXC91231_PIN_AP_ED_INT7		= IOMUX_PIN(0, 2, 25, 23, 0, 23),
+	MXC91231_PIN_AP_U2_DSR_B	= IOMUX_PIN(0, 2, 26, 23, 1, 28),
+	MXC91231_PIN_AP_U2_RI_B		= IOMUX_PIN(0, 2, 27, 23, 2, 28),
+	MXC91231_PIN_AP_U2_CTS_B	= IOMUX_PIN(0, 2, 28, 23, 3, 28),
+	MXC91231_PIN_AP_U2_DTR_B	= IOMUX_PIN(0, 2, 29, 24, 0, 28),
+	MXC91231_PIN_AP_KPROW0		= IOMUX_PIN(0, 7,  0, 24, 1, 10),
+	MXC91231_PIN_AP_KPROW1		= IOMUX_PIN(0, 1, 15, 24, 2, 10),
+	MXC91231_PIN_AP_KPROW2		= IOMUX_PIN(0, 7,  0, 24, 3, 10),
+	MXC91231_PIN_AP_KPROW3		= IOMUX_PIN(0, 7,  0, 25, 0, 10),
+	MXC91231_PIN_AP_KPCOL0		= IOMUX_PIN(0, 7,  0, 25, 1, 11),
+	MXC91231_PIN_AP_KPCOL1		= IOMUX_PIN(0, 7,  0, 25, 2, 11),
+	MXC91231_PIN_AP_KPCOL2		= IOMUX_PIN(0, 7,  0, 25, 3, 11),
+
+	/* Shared pins */
+	MXC91231_PIN_SP_U3_TXD		= IOMUX_PIN(1, 3,  0,  0, 0, 28),
+	MXC91231_PIN_SP_U3_RXD		= IOMUX_PIN(1, 3,  1,  0, 1, 28),
+	MXC91231_PIN_SP_U3_RTS_B	= IOMUX_PIN(1, 3,  2,  0, 2, 28),
+	MXC91231_PIN_SP_U3_CTS_B	= IOMUX_PIN(1, 3,  3,  0, 3, 28),
+	MXC91231_PIN_SP_USB_TXOE_B	= IOMUX_PIN(1, 3,  4,  1, 0, 28),
+	MXC91231_PIN_SP_USB_DAT_VP	= IOMUX_PIN(1, 3,  5,  1, 1, 28),
+	MXC91231_PIN_SP_USB_SE0_VM	= IOMUX_PIN(1, 3,  6,  1, 2, 28),
+	MXC91231_PIN_SP_USB_RXD		= IOMUX_PIN(1, 3,  7,  1, 3, 28),
+	MXC91231_PIN_SP_UH2_TXOE_B	= IOMUX_PIN(1, 3,  8,  2, 0, 28),
+	MXC91231_PIN_SP_UH2_SPEED	= IOMUX_PIN(1, 3,  9,  2, 1, 28),
+	MXC91231_PIN_SP_UH2_SUSPEN	= IOMUX_PIN(1, 3, 10,  2, 2, 28),
+	MXC91231_PIN_SP_UH2_TXDP	= IOMUX_PIN(1, 3, 11,  2, 3, 28),
+	MXC91231_PIN_SP_UH2_RXDP	= IOMUX_PIN(1, 3, 12,  3, 0, 28),
+	MXC91231_PIN_SP_UH2_RXDM	= IOMUX_PIN(1, 3, 13,  3, 1, 28),
+	MXC91231_PIN_SP_UH2_OVR		= IOMUX_PIN(1, 3, 14,  3, 2, 28),
+	MXC91231_PIN_SP_UH2_PWR		= IOMUX_PIN(1, 3, 15,  3, 3, 28),
+	MXC91231_PIN_SP_SD1_DAT0	= IOMUX_PIN(1, 3, 16,  4, 0, 25),
+	MXC91231_PIN_SP_SD1_DAT1	= IOMUX_PIN(1, 3, 17,  4, 1, 25),
+	MXC91231_PIN_SP_SD1_DAT2	= IOMUX_PIN(1, 3, 18,  4, 2, 25),
+	MXC91231_PIN_SP_SD1_DAT3	= IOMUX_PIN(1, 3, 19,  4, 3, 25),
+	MXC91231_PIN_SP_SD1_CMD		= IOMUX_PIN(1, 3, 20,  5, 0, 25),
+	MXC91231_PIN_SP_SD1_CLK		= IOMUX_PIN(1, 3, 21,  5, 1, 25),
+	MXC91231_PIN_SP_SD2_DAT0	= IOMUX_PIN(1, 3, 22,  5, 2, 26),
+	MXC91231_PIN_SP_SD2_DAT1	= IOMUX_PIN(1, 3, 23,  5, 3, 26),
+	MXC91231_PIN_SP_SD2_DAT2	= IOMUX_PIN(1, 3, 24,  6, 0, 26),
+	MXC91231_PIN_SP_SD2_DAT3	= IOMUX_PIN(1, 3, 25,  6, 1, 26),
+	MXC91231_PIN_SP_GPIO_SP_A26	= IOMUX_PIN(1, 3, 26,  6, 2, 28),
+	MXC91231_PIN_SP_SPI1_CLK	= IOMUX_PIN(1, 3, 27,  6, 3, 13),
+	MXC91231_PIN_SP_SPI1_MOSI	= IOMUX_PIN(1, 3, 28,  7, 0, 13),
+	MXC91231_PIN_SP_SPI1_MISO	= IOMUX_PIN(1, 3, 29,  7, 1, 13),
+	MXC91231_PIN_SP_SPI1_SS0	= IOMUX_PIN(1, 3, 30,  7, 2, 13),
+	MXC91231_PIN_SP_SPI1_SS1	= IOMUX_PIN(1, 3, 31,  7, 3, 13),
+	MXC91231_PIN_SP_SD2_CMD		= IOMUX_PIN(1, 7,  0,  8, 0, 26),
+	MXC91231_PIN_SP_SD2_CLK		= IOMUX_PIN(1, 7,  0,  8, 1, 26),
+	MXC91231_PIN_SP_SIM1_RST_B	= IOMUX_PIN(1, 2, 30,  8, 2, 28),
+	MXC91231_PIN_SP_SIM1_SVEN	= IOMUX_PIN(1, 7,  0,  8, 3, 28),
+	MXC91231_PIN_SP_SIM1_CLK	= IOMUX_PIN(1, 7,  0,  9, 0, 28),
+	MXC91231_PIN_SP_SIM1_TRXD	= IOMUX_PIN(1, 7,  0,  9, 1, 28),
+	MXC91231_PIN_SP_SIM1_PD		= IOMUX_PIN(1, 2, 31,  9, 2, 28),
+	MXC91231_PIN_SP_UH2_TXDM	= IOMUX_PIN(1, 7,  0,  9, 3, 28),
+	MXC91231_PIN_SP_UH2_RXD		= IOMUX_PIN(1, 7,  0, 10, 0, 28),
+};
+
+#define PIN_AP_MAX	(104)
+#define PIN_SP_MAX	(41)
+
+#define PIN_MAX		(PIN_AP_MAX + PIN_SP_MAX)
+
+/*
+ * Convenience values for use with mxc_iomux_mode()
+ *
+ * Format here is MXC91231_PIN_(pin name)__(function)
+ */
+
+#define MXC91231_PIN_SP_USB_DAT_VP__USB_DAT_VP \
+	IOMUX_MODE(MXC91231_PIN_SP_USB_DAT_VP, IOMUX_CONFIG_FUNC)
+#define MXC91231_PIN_SP_USB_SE0_VM__USB_SE0_VM \
+	IOMUX_MODE(MXC91231_PIN_SP_USB_SE0_VM, IOMUX_CONFIG_FUNC)
+#define MXC91231_PIN_SP_USB_DAT_VP__RXD2 \
+	IOMUX_MODE(MXC91231_PIN_SP_USB_DAT_VP, IOMUX_CONFIG_ALT1)
+#define MXC91231_PIN_SP_USB_SE0_VM__TXD2 \
+	IOMUX_MODE(MXC91231_PIN_SP_USB_SE0_VM, IOMUX_CONFIG_ALT1)
+
+
+#endif /* __MACH_IOMUX_MXC91231_H__ */
-- 
cgit v1.2.3


From 89829d5fe31dc42825f2560c3c2c641709ed594e Mon Sep 17 00:00:00 2001
From: Valentin Longchamp <valentin.longchamp@epfl.ch>
Date: Mon, 10 Aug 2009 18:33:10 +0200
Subject: mx31: added one more pin definition

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/include/mach/iomux-mx3.h | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
index a3b206ce78b..67452732794 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
@@ -682,6 +682,7 @@ enum iomux_pins {
 #define MX31_PIN_GPIO3_0__GPIO3_0	IOMUX_MODE(MX31_PIN_GPIO3_0, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_GPIO3_1__GPIO3_1	IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_TXD2__GPIO1_28		IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_GPIO1_0__GPIO1_0	IOMUX_MODE(MX31_PIN_GPIO1_0, IOMUX_CONFIG_GPIO)
 
 /*XXX: The SS0, SS1, SS2, SS3 lines of spi3 are multiplexed by cspi2_ss0, cspi2_ss1, cspi1_ss0
  * cspi1_ss1*/
-- 
cgit v1.2.3


From b23f1534bb0e0dc97e46fc52bf9bde0c2226763c Mon Sep 17 00:00:00 2001
From: Valentin Longchamp <valentin.longchamp@epfl.ch>
Date: Mon, 10 Aug 2009 18:33:11 +0200
Subject: mx31moboard: added usb xcvr reset for mx31moboard

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/mx31moboard-devboard.c | 30 ++++++++++++++++--------------
 arch/arm/mach-mx3/mx31moboard-marxbot.c  | 28 +++++++++++++++-------------
 arch/arm/mach-mx3/mx31moboard.c          | 18 ++++++++++++++++++
 3 files changed, 49 insertions(+), 27 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-mx3/mx31moboard-devboard.c b/arch/arm/mach-mx3/mx31moboard-devboard.c
index 4704405165a..2f2f142f075 100644
--- a/arch/arm/mach-mx3/mx31moboard-devboard.c
+++ b/arch/arm/mach-mx3/mx31moboard-devboard.c
@@ -116,23 +116,25 @@ static struct fsl_usb2_platform_data usb_pdata = {
 	.phy_mode	= FSL_USB2_PHY_ULPI,
 };
 
-#define OTG_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST)
-#define OTG_EN_B IOMUX_TO_GPIO(MX31_PIN_USB_OC)
+#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
+			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
+
+#define OTG_EN_B 	IOMUX_TO_GPIO(MX31_PIN_USB_OC)
 
 static void devboard_usbotg_init(void)
 {
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG);
 
 	gpio_request(OTG_EN_B, "usb-udc-en");
 	gpio_direction_output(OTG_EN_B, 0);
diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c
index 641c3d6153a..b817a4a5bcb 100644
--- a/arch/arm/mach-mx3/mx31moboard-marxbot.c
+++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c
@@ -120,23 +120,25 @@ static struct fsl_usb2_platform_data usb_pdata = {
 	.phy_mode	= FSL_USB2_PHY_ULPI,
 };
 
-#define OTG_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST)
+#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
+			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
+
 #define OTG_EN_B IOMUX_TO_GPIO(MX31_PIN_USB_OC)
 
 static void marxbot_usbotg_init(void)
 {
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, OTG_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, OTG_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG);
 
 	gpio_request(OTG_EN_B, "usb-udc-en");
 	gpio_direction_output(OTG_EN_B, 0);
diff --git a/arch/arm/mach-mx3/mx31moboard.c b/arch/arm/mach-mx3/mx31moboard.c
index b86b8a757c9..53ce60bdc82 100644
--- a/arch/arm/mach-mx3/mx31moboard.c
+++ b/arch/arm/mach-mx3/mx31moboard.c
@@ -16,6 +16,7 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
+#include <linux/delay.h>
 #include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
@@ -56,6 +57,8 @@ static unsigned int moboard_pins[] = {
 	MX31_PIN_SD1_DATA1__SD1_DATA1, MX31_PIN_SD1_DATA0__SD1_DATA0,
 	MX31_PIN_SD1_CLK__SD1_CLK, MX31_PIN_SD1_CMD__SD1_CMD,
 	MX31_PIN_ATA_CS0__GPIO3_26, MX31_PIN_ATA_CS1__GPIO3_27,
+	/* USB reset */
+	MX31_PIN_GPIO1_0__GPIO1_0,
 };
 
 static struct physmap_flash_data mx31moboard_flash_data = {
@@ -143,6 +146,19 @@ static struct imxmmc_platform_data sdhc1_pdata = {
 	.exit	= moboard_sdhc1_exit,
 };
 
+/*
+ * this pin is dedicated for all mx31moboard systems, so we do it here
+ */
+#define USB_RESET_B	IOMUX_TO_GPIO(MX31_PIN_GPIO1_0)
+
+static void usb_xcvr_reset(void)
+{
+	gpio_request(USB_RESET_B, "usb-reset");
+	gpio_direction_output(USB_RESET_B, 0);
+	mdelay(1);
+	gpio_set_value(USB_RESET_B, 1);
+}
+
 static struct platform_device *devices[] __initdata = {
 	&mx31moboard_flash,
 };
@@ -168,6 +184,8 @@ static void __init mxc_board_init(void)
 
 	mxc_register_device(&mxcsdhc_device0, &sdhc1_pdata);
 
+	usb_xcvr_reset();
+
 	switch (mx31moboard_baseboard) {
 	case MX31NOBOARD:
 		break;
-- 
cgit v1.2.3


From 88b05647171460b1d479371690876f8ac5957d42 Mon Sep 17 00:00:00 2001
From: Valentin Longchamp <valentin.longchamp@epfl.ch>
Date: Mon, 10 Aug 2009 18:33:12 +0200
Subject: mx31moboard: move usb otg support back to moboard common file

since all boards finally have this device

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/mx31moboard-devboard.c | 45 --------------------------------
 arch/arm/mach-mx3/mx31moboard-marxbot.c  | 45 --------------------------------
 arch/arm/mach-mx3/mx31moboard.c          | 45 ++++++++++++++++++++++++++++++++
 3 files changed, 45 insertions(+), 90 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-mx3/mx31moboard-devboard.c b/arch/arm/mach-mx3/mx31moboard-devboard.c
index 2f2f142f075..b3e8f251ac7 100644
--- a/arch/arm/mach-mx3/mx31moboard-devboard.c
+++ b/arch/arm/mach-mx3/mx31moboard-devboard.c
@@ -16,7 +16,6 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
-#include <linux/fsl_devices.h>
 #include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
@@ -40,18 +39,6 @@ static unsigned int devboard_pins[] = {
 	MX31_PIN_PC_READY__SD2_DATA1, MX31_PIN_PC_WAIT_B__SD2_DATA0,
 	MX31_PIN_PC_CD2_B__SD2_CLK, MX31_PIN_PC_CD1_B__SD2_CMD,
 	MX31_PIN_ATA_DIOR__GPIO3_28, MX31_PIN_ATA_DIOW__GPIO3_29,
-	/* USB OTG */
-	MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
-	MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
-	MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
-	MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
-	MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
-	MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
-	MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
-	MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
-	MX31_PIN_USBOTG_CLK__USBOTG_CLK, MX31_PIN_USBOTG_DIR__USBOTG_DIR,
-	MX31_PIN_USBOTG_NXT__USBOTG_NXT, MX31_PIN_USBOTG_STP__USBOTG_STP,
-	MX31_PIN_USB_OC__GPIO1_30,
 };
 
 static struct imxuart_platform_data uart_pdata = {
@@ -111,35 +98,6 @@ static struct imxmmc_platform_data sdhc2_pdata = {
 	.exit	= devboard_sdhc2_exit,
 };
 
-static struct fsl_usb2_platform_data usb_pdata = {
-	.operating_mode	= FSL_USB2_DR_DEVICE,
-	.phy_mode	= FSL_USB2_PHY_ULPI,
-};
-
-#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
-			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
-
-#define OTG_EN_B 	IOMUX_TO_GPIO(MX31_PIN_USB_OC)
-
-static void devboard_usbotg_init(void)
-{
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG);
-
-	gpio_request(OTG_EN_B, "usb-udc-en");
-	gpio_direction_output(OTG_EN_B, 0);
-}
-
 /*
  * system init for baseboard usage. Will be called by mx31moboard init.
  */
@@ -153,7 +111,4 @@ void __init mx31moboard_devboard_init(void)
 	mxc_register_device(&mxc_uart_device1, &uart_pdata);
 
 	mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata);
-
-	devboard_usbotg_init();
-	mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
 }
diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c
index b817a4a5bcb..53ce7ff0637 100644
--- a/arch/arm/mach-mx3/mx31moboard-marxbot.c
+++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c
@@ -16,7 +16,6 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
-#include <linux/fsl_devices.h>
 #include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
@@ -48,18 +47,6 @@ static unsigned int marxbot_pins[] = {
 	MX31_PIN_CSI_PIXCLK__CSI_PIXCLK, MX31_PIN_CSI_VSYNC__CSI_VSYNC,
 	MX31_PIN_GPIO3_0__GPIO3_0, MX31_PIN_GPIO3_1__GPIO3_1,
 	MX31_PIN_TXD2__GPIO1_28,
-	/* USB OTG */
-	MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
-	MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
-	MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
-	MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
-	MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
-	MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
-	MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
-	MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
-	MX31_PIN_USBOTG_CLK__USBOTG_CLK, MX31_PIN_USBOTG_DIR__USBOTG_DIR,
-	MX31_PIN_USBOTG_NXT__USBOTG_NXT, MX31_PIN_USBOTG_STP__USBOTG_STP,
-	MX31_PIN_USB_OC__GPIO1_30,
 };
 
 #define SDHC2_CD IOMUX_TO_GPIO(MX31_PIN_ATA_DIOR)
@@ -115,35 +102,6 @@ static struct imxmmc_platform_data sdhc2_pdata = {
 	.exit	= marxbot_sdhc2_exit,
 };
 
-static struct fsl_usb2_platform_data usb_pdata = {
-	.operating_mode	= FSL_USB2_DR_DEVICE,
-	.phy_mode	= FSL_USB2_PHY_ULPI,
-};
-
-#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
-			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
-
-#define OTG_EN_B IOMUX_TO_GPIO(MX31_PIN_USB_OC)
-
-static void marxbot_usbotg_init(void)
-{
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG);
-	mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG);
-
-	gpio_request(OTG_EN_B, "usb-udc-en");
-	gpio_direction_output(OTG_EN_B, 0);
-}
-
 /*
  * system init for baseboard usage. Will be called by mx31moboard init.
  */
@@ -155,7 +113,4 @@ void __init mx31moboard_marxbot_init(void)
 		"marxbot");
 
 	mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata);
-
-	marxbot_usbotg_init();
-	mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
 }
diff --git a/arch/arm/mach-mx3/mx31moboard.c b/arch/arm/mach-mx3/mx31moboard.c
index 53ce60bdc82..2852bd58eda 100644
--- a/arch/arm/mach-mx3/mx31moboard.c
+++ b/arch/arm/mach-mx3/mx31moboard.c
@@ -17,6 +17,7 @@
  */
 
 #include <linux/delay.h>
+#include <linux/fsl_devices.h>
 #include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
@@ -59,6 +60,18 @@ static unsigned int moboard_pins[] = {
 	MX31_PIN_ATA_CS0__GPIO3_26, MX31_PIN_ATA_CS1__GPIO3_27,
 	/* USB reset */
 	MX31_PIN_GPIO1_0__GPIO1_0,
+	/* USB OTG */
+	MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
+	MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
+	MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
+	MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
+	MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
+	MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
+	MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
+	MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
+	MX31_PIN_USBOTG_CLK__USBOTG_CLK, MX31_PIN_USBOTG_DIR__USBOTG_DIR,
+	MX31_PIN_USBOTG_NXT__USBOTG_NXT, MX31_PIN_USBOTG_STP__USBOTG_STP,
+	MX31_PIN_USB_OC__GPIO1_30,
 };
 
 static struct physmap_flash_data mx31moboard_flash_data = {
@@ -159,6 +172,35 @@ static void usb_xcvr_reset(void)
 	gpio_set_value(USB_RESET_B, 1);
 }
 
+#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
+			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
+
+#define OTG_EN_B IOMUX_TO_GPIO(MX31_PIN_USB_OC)
+
+static void moboard_usbotg_init(void)
+{
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG);
+
+	gpio_request(OTG_EN_B, "usb-udc-en");
+	gpio_direction_output(OTG_EN_B, 0);
+}
+
+static struct fsl_usb2_platform_data usb_pdata = {
+	.operating_mode	= FSL_USB2_DR_DEVICE,
+	.phy_mode	= FSL_USB2_PHY_ULPI,
+};
+
 static struct platform_device *devices[] __initdata = {
 	&mx31moboard_flash,
 };
@@ -186,6 +228,9 @@ static void __init mxc_board_init(void)
 
 	usb_xcvr_reset();
 
+	moboard_usbotg_init();
+	mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
+
 	switch (mx31moboard_baseboard) {
 	case MX31NOBOARD:
 		break;
-- 
cgit v1.2.3


From f420db843b7756e5d0d052b00472c94154f50c93 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Fri, 19 Dec 2008 14:32:14 +0100
Subject: MX2: Add SPI devices/resources

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx2/devices.c | 68 +++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/mach-mx2/devices.h |  4 +++
 2 files changed, 72 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-mx2/devices.c b/arch/arm/mach-mx2/devices.c
index 4ecf0977beb..62810cbe4e3 100644
--- a/arch/arm/mach-mx2/devices.c
+++ b/arch/arm/mach-mx2/devices.c
@@ -39,6 +39,74 @@
 
 #include "devices.h"
 
+/*
+ * SPI master controller
+ *
+ * - i.MX1: 2 channel (slighly different register setting)
+ * - i.MX21: 2 channel
+ * - i.MX27: 3 channel
+ */
+static struct resource mxc_spi_resources0[] = {
+	{
+	       .start = CSPI1_BASE_ADDR,
+	       .end = CSPI1_BASE_ADDR + SZ_4K - 1,
+	       .flags = IORESOURCE_MEM,
+	}, {
+	       .start = MXC_INT_CSPI1,
+	       .end = MXC_INT_CSPI1,
+	       .flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource mxc_spi_resources1[] = {
+	{
+		.start = CSPI2_BASE_ADDR,
+		.end = CSPI2_BASE_ADDR + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC_INT_CSPI2,
+		.end = MXC_INT_CSPI2,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+#ifdef CONFIG_MACH_MX27
+static struct resource mxc_spi_resources2[] = {
+	{
+		.start = CSPI3_BASE_ADDR,
+		.end = CSPI3_BASE_ADDR + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC_INT_CSPI3,
+		.end = MXC_INT_CSPI3,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+#endif
+
+struct platform_device mxc_spi_device0 = {
+	.name = "spi_imx",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(mxc_spi_resources0),
+	.resource = mxc_spi_resources0,
+};
+
+struct platform_device mxc_spi_device1 = {
+	.name = "spi_imx",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(mxc_spi_resources1),
+	.resource = mxc_spi_resources1,
+};
+
+#ifdef CONFIG_MACH_MX27
+struct platform_device mxc_spi_device2 = {
+	.name = "spi_imx",
+	.id = 2,
+	.num_resources = ARRAY_SIZE(mxc_spi_resources2),
+	.resource = mxc_spi_resources2,
+};
+#endif
+
 /*
  * General Purpose Timer
  * - i.MX21: 3 timers
diff --git a/arch/arm/mach-mx2/devices.h b/arch/arm/mach-mx2/devices.h
index 6e91b4e3509..d315406d672 100644
--- a/arch/arm/mach-mx2/devices.h
+++ b/arch/arm/mach-mx2/devices.h
@@ -23,3 +23,7 @@ extern struct platform_device mxc_otg_udc_device;
 extern struct platform_device mxc_otg_host;
 extern struct platform_device mxc_usbh1;
 extern struct platform_device mxc_usbh2;
+extern struct platform_device mxc_spi_device0;
+extern struct platform_device mxc_spi_device1;
+extern struct platform_device mxc_spi_device2;
+
-- 
cgit v1.2.3


From d37ba97d49703be4e71f786cffcee4dfe73fa93c Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Fri, 19 Dec 2008 14:32:15 +0100
Subject: MX31: add spi controller devices/resources

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/devices.c | 61 +++++++++++++++++++++++++++++++++++++++++++++
 arch/arm/mach-mx3/devices.h |  3 +++
 2 files changed, 64 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
index 4e728a29196..cde1b079242 100644
--- a/arch/arm/mach-mx3/devices.c
+++ b/arch/arm/mach-mx3/devices.c
@@ -455,6 +455,67 @@ struct platform_device mxc_usbh2 = {
 	.num_resources = ARRAY_SIZE(mxc_usbh2_resources),
 };
 
+/*
+ * SPI master controller
+ * 3 channels
+ */
+static struct resource imx_spi_0_resources[] = {
+	{
+	       .start = CSPI1_BASE_ADDR,
+	       .end = CSPI1_BASE_ADDR + SZ_4K - 1,
+	       .flags = IORESOURCE_MEM,
+	}, {
+	       .start = MXC_INT_CSPI1,
+	       .end = MXC_INT_CSPI1,
+	       .flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource imx_spi_1_resources[] = {
+	{
+		.start = CSPI2_BASE_ADDR,
+		.end = CSPI2_BASE_ADDR + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC_INT_CSPI2,
+		.end = MXC_INT_CSPI2,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource imx_spi_2_resources[] = {
+	{
+		.start = CSPI3_BASE_ADDR,
+		.end = CSPI3_BASE_ADDR + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = MXC_INT_CSPI3,
+		.end = MXC_INT_CSPI3,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device imx_spi_device0 = {
+	.name = "spi_imx",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(imx_spi_0_resources),
+	.resource = imx_spi_0_resources,
+};
+
+struct platform_device imx_spi_device1 = {
+	.name = "spi_imx",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(imx_spi_1_resources),
+	.resource = imx_spi_1_resources,
+};
+
+struct platform_device imx_spi_device2 = {
+	.name = "spi_imx",
+	.id = 2,
+	.num_resources = ARRAY_SIZE(imx_spi_2_resources),
+	.resource = imx_spi_2_resources,
+};
+
 #ifdef CONFIG_ARCH_MX35
 static struct resource mxc_fec_resources[] = {
 	{
diff --git a/arch/arm/mach-mx3/devices.h b/arch/arm/mach-mx3/devices.h
index 81614319755..79f2be45d13 100644
--- a/arch/arm/mach-mx3/devices.h
+++ b/arch/arm/mach-mx3/devices.h
@@ -20,4 +20,7 @@ extern struct platform_device mxc_otg_host;
 extern struct platform_device mxc_usbh1;
 extern struct platform_device mxc_usbh2;
 extern struct platform_device mxc_rnga_device;
+extern struct platform_device imx_spi_device0;
+extern struct platform_device imx_spi_device1;
+extern struct platform_device imx_spi_device2;
 
-- 
cgit v1.2.3


From 547270a3b9f2deb9590b65e8fc351e5399ddf15d Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Tue, 17 Mar 2009 15:43:54 +0100
Subject: i.MX35 clock support: Add USB clocks

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/clock-imx35.c | 20 ++++++++++++++++++--
 1 file changed, 18 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c
index 1dbcdc07257..fe5c4217322 100644
--- a/arch/arm/mach-mx3/clock-imx35.c
+++ b/arch/arm/mach-mx3/clock-imx35.c
@@ -273,6 +273,19 @@ static unsigned long get_rate_csi(struct clk *clk)
 	return rate / get_3_3_div((pdr2 >> 16) & 0x3f);
 }
 
+static unsigned long get_rate_otg(struct clk *clk)
+{
+	unsigned long pdr4 = __raw_readl(CCM_BASE + CCM_PDR4);
+	unsigned long rate;
+
+	if (pdr4 & (1 << 9))
+		rate = get_rate_arm();
+	else
+		rate = get_rate_ppll();
+
+	return rate / get_3_3_div((pdr4 >> 22) & 0x3f);
+}
+
 static unsigned long get_rate_ipg_per(struct clk *clk)
 {
 	unsigned long pdr0 = __raw_readl(CCM_BASE + CCM_PDR0);
@@ -365,7 +378,7 @@ DEFINE_CLOCK(ssi2_clk,   1, CCM_CGR2, 14, get_rate_ssi, NULL);
 DEFINE_CLOCK(uart1_clk,  0, CCM_CGR2, 16, get_rate_uart, NULL);
 DEFINE_CLOCK(uart2_clk,  1, CCM_CGR2, 18, get_rate_uart, NULL);
 DEFINE_CLOCK(uart3_clk,  2, CCM_CGR2, 20, get_rate_uart, NULL);
-DEFINE_CLOCK(usbotg_clk, 0, CCM_CGR2, 22, NULL, NULL);
+DEFINE_CLOCK(usbotg_clk, 0, CCM_CGR2, 22, get_rate_otg, NULL);
 DEFINE_CLOCK(wdog_clk,   0, CCM_CGR2, 24, NULL, NULL);
 DEFINE_CLOCK(max_clk,    0, CCM_CGR2, 26, NULL, NULL);
 DEFINE_CLOCK(admux_clk,  0, CCM_CGR2, 30, NULL, NULL);
@@ -426,7 +439,10 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk)
 	_REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk)
 	_REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
-	_REGISTER_CLOCK(NULL, "usbotg", usbotg_clk)
+	_REGISTER_CLOCK("mxc-ehci.0", "usb", usbotg_clk)
+	_REGISTER_CLOCK("mxc-ehci.1", "usb", usbotg_clk)
+	_REGISTER_CLOCK("mxc-ehci.2", "usb", usbotg_clk)
+	_REGISTER_CLOCK("fsl-usb2-udc", "usb", usbotg_clk)
 	_REGISTER_CLOCK("mxc_wdt.0", NULL, wdog_clk)
 	_REGISTER_CLOCK(NULL, "max", max_clk)
 	_REGISTER_CLOCK(NULL, "admux", admux_clk)
-- 
cgit v1.2.3


From 337316986f0531e1681c409de9b73af0bc6dc7bb Mon Sep 17 00:00:00 2001
From: Luotao Fu <l.fu@pengutronix.de>
Date: Thu, 6 Aug 2009 11:19:39 +0200
Subject: mx27: add support for phytec pca100 (phyCARD-s) board

Signed-off-by: Luotao Fu <l.fu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx2/Kconfig  |   7 ++
 arch/arm/mach-mx2/Makefile |   2 +
 arch/arm/mach-mx2/pca100.c | 244 +++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 253 insertions(+)
 create mode 100644 arch/arm/mach-mx2/pca100.c

(limited to 'arch')

diff --git a/arch/arm/mach-mx2/Kconfig b/arch/arm/mach-mx2/Kconfig
index 0c28a37bc14..c8a2eac4d13 100644
--- a/arch/arm/mach-mx2/Kconfig
+++ b/arch/arm/mach-mx2/Kconfig
@@ -95,4 +95,11 @@ config MACH_MX27LITE
 	  Include support for MX27 LITEKIT platform. This includes specific
 	  configurations for the board and its peripherals.
 
+config MACH_PCA100
+	bool "Phytec phyCARD-s (pca100)"
+	depends on MACH_MX27
+	help
+	  Include support for phyCARD-s (aka pca100) platform. This
+	  includes specific configurations for the module and its peripherals.
+
 endif
diff --git a/arch/arm/mach-mx2/Makefile b/arch/arm/mach-mx2/Makefile
index 8b6846c4226..19560f04563 100644
--- a/arch/arm/mach-mx2/Makefile
+++ b/arch/arm/mach-mx2/Makefile
@@ -19,3 +19,5 @@ obj-$(CONFIG_MACH_MX27_3DS) += mx27pdk.o
 obj-$(CONFIG_MACH_MX27LITE) += mx27lite.o
 obj-$(CONFIG_MACH_EUKREA_CPUIMX27) += eukrea_cpuimx27.o
 obj-$(CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD) += eukrea_mbimx27-baseboard.o
+obj-$(CONFIG_MACH_PCA100) += pca100.o
+
diff --git a/arch/arm/mach-mx2/pca100.c b/arch/arm/mach-mx2/pca100.c
new file mode 100644
index 00000000000..fe5b165b88c
--- /dev/null
+++ b/arch/arm/mach-mx2/pca100.c
@@ -0,0 +1,244 @@
+/*
+ * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
+ * Copyright (C) 2009 Sascha Hauer (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+#include <linux/dma-mapping.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/eeprom.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/iomux.h>
+#include <mach/i2c.h>
+#include <asm/mach/time.h>
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+#include <mach/spi.h>
+#endif
+#include <mach/imx-uart.h>
+#include <mach/mxc_nand.h>
+#include <mach/irqs.h>
+#include <mach/mmc.h>
+
+#include "devices.h"
+
+static int pca100_pins[] = {
+	/* UART1 */
+	PE12_PF_UART1_TXD,
+	PE13_PF_UART1_RXD,
+	PE14_PF_UART1_CTS,
+	PE15_PF_UART1_RTS,
+	/* SDHC */
+	PB4_PF_SD2_D0,
+	PB5_PF_SD2_D1,
+	PB6_PF_SD2_D2,
+	PB7_PF_SD2_D3,
+	PB8_PF_SD2_CMD,
+	PB9_PF_SD2_CLK,
+	/* FEC */
+	PD0_AIN_FEC_TXD0,
+	PD1_AIN_FEC_TXD1,
+	PD2_AIN_FEC_TXD2,
+	PD3_AIN_FEC_TXD3,
+	PD4_AOUT_FEC_RX_ER,
+	PD5_AOUT_FEC_RXD1,
+	PD6_AOUT_FEC_RXD2,
+	PD7_AOUT_FEC_RXD3,
+	PD8_AF_FEC_MDIO,
+	PD9_AIN_FEC_MDC,
+	PD10_AOUT_FEC_CRS,
+	PD11_AOUT_FEC_TX_CLK,
+	PD12_AOUT_FEC_RXD0,
+	PD13_AOUT_FEC_RX_DV,
+	PD14_AOUT_FEC_RX_CLK,
+	PD15_AOUT_FEC_COL,
+	PD16_AIN_FEC_TX_ER,
+	PF23_AIN_FEC_TX_EN,
+	/* SSI1 */
+	PC20_PF_SSI1_FS,
+	PC21_PF_SSI1_RXD,
+	PC22_PF_SSI1_TXD,
+	PC23_PF_SSI1_CLK,
+	/* onboard I2C */
+	PC5_PF_I2C2_SDA,
+	PC6_PF_I2C2_SCL,
+	/* external I2C */
+	PD17_PF_I2C_DATA,
+	PD18_PF_I2C_CLK,
+	/* SPI1 */
+	PD25_PF_CSPI1_RDY,
+	PD29_PF_CSPI1_SCLK,
+	PD30_PF_CSPI1_MISO,
+	PD31_PF_CSPI1_MOSI,
+};
+
+static struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct mxc_nand_platform_data pca100_nand_board_info = {
+	.width = 1,
+	.hw_ecc = 1,
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+	&mxc_w1_master_device,
+	&mxc_fec_device,
+};
+
+static struct imxi2c_platform_data pca100_i2c_1_data = {
+	.bitrate = 100000,
+};
+
+static struct at24_platform_data board_eeprom = {
+	.byte_len = 4096,
+	.page_size = 32,
+	.flags = AT24_FLAG_ADDR16,
+};
+
+static struct i2c_board_info pca100_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
+		.platform_data = &board_eeprom,
+	}, {
+		I2C_BOARD_INFO("rtc-pcf8563", 0x51),
+		.type = "pcf8563"
+	}, {
+		I2C_BOARD_INFO("lm75", 0x4a),
+		.type = "lm75"
+	}
+};
+
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+static struct spi_eeprom at25320 = {
+	.name		= "at25320an",
+	.byte_len	= 4096,
+	.page_size	= 32,
+	.flags		= EE_ADDR2,
+};
+
+static struct spi_board_info pca100_spi_board_info[] __initdata = {
+	{
+		.modalias = "at25",
+		.max_speed_hz = 30000,
+		.bus_num = 0,
+		.chip_select = 1,
+		.platform_data = &at25320,
+	},
+};
+
+static int pca100_spi_cs[] = {GPIO_PORTD + 28, GPIO_PORTD + 27};
+
+static struct spi_imx_master pca100_spi_0_data = {
+	.chipselect	= pca100_spi_cs,
+	.num_chipselect = ARRAY_SIZE(pca100_spi_cs),
+};
+#endif
+
+static int pca100_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
+		void *data)
+{
+	int ret;
+
+	ret = request_irq(IRQ_GPIOC(29), detect_irq,
+			  IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+			  "imx-mmc-detect", data);
+	if (ret)
+		printk(KERN_ERR
+			"pca100: Failed to reuest irq for sd/mmc detection\n");
+
+	return ret;
+}
+
+static void pca100_sdhc2_exit(struct device *dev, void *data)
+{
+	free_irq(IRQ_GPIOC(29), data);
+}
+
+static struct imxmmc_platform_data sdhc_pdata = {
+	.init = pca100_sdhc2_init,
+	.exit = pca100_sdhc2_exit,
+};
+
+static void __init pca100_init(void)
+{
+	int ret;
+
+	ret = mxc_gpio_setup_multiple_pins(pca100_pins,
+			ARRAY_SIZE(pca100_pins), "PCA100");
+	if (ret)
+		printk(KERN_ERR "pca100: Failed to setup pins (%d)\n", ret);
+
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+
+	mxc_gpio_mode(GPIO_PORTC | 29 | GPIO_GPIO | GPIO_IN);
+	mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata);
+
+	mxc_register_device(&mxc_nand_device, &pca100_nand_board_info);
+
+	/* only the i2c master 1 is used on this CPU card */
+	i2c_register_board_info(1, pca100_i2c_devices,
+				ARRAY_SIZE(pca100_i2c_devices));
+
+	mxc_register_device(&mxc_i2c_device1, &pca100_i2c_1_data);
+
+	mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
+	mxc_gpio_mode(GPIO_PORTD | 27 | GPIO_GPIO | GPIO_OUT);
+
+	/* GPIO0_IRQ */
+	mxc_gpio_mode(GPIO_PORTC | 31 | GPIO_GPIO | GPIO_IN);
+	/* GPIO1_IRQ */
+	mxc_gpio_mode(GPIO_PORTC | 25 | GPIO_GPIO | GPIO_IN);
+	/* GPIO2_IRQ */
+	mxc_gpio_mode(GPIO_PORTE | 5 | GPIO_GPIO | GPIO_IN);
+
+#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
+	spi_register_board_info(pca100_spi_board_info,
+				ARRAY_SIZE(pca100_spi_board_info));
+	mxc_register_device(&mxc_spi_device0, &pca100_spi_0_data);
+#endif
+
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
+
+static void __init pca100_timer_init(void)
+{
+	mx27_clocks_init(26000000);
+}
+
+static struct sys_timer pca100_timer = {
+	.init = pca100_timer_init,
+};
+
+MACHINE_START(PCA100, "phyCARD-i.MX27")
+	.phys_io        = AIPI_BASE_ADDR,
+	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = PHYS_OFFSET + 0x100,
+	.map_io         = mx27_map_io,
+	.init_irq       = mxc_init_irq,
+	.init_machine   = pca100_init,
+	.timer          = &pca100_timer,
+MACHINE_END
+
-- 
cgit v1.2.3


From 7bc07ebc7d2e9ad57baf205840ce31e9243ed5e8 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Fri, 17 Apr 2009 16:52:25 +0200
Subject: mx3x: Fixup USB base addresses

The i.MX31 and the i.MX35 have different USB base addresses. Adjust
the resources accordingly.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/devices.c           | 20 ++++++++++++++------
 arch/arm/plat-mxc/include/mach/mx31.h |  2 +-
 arch/arm/plat-mxc/include/mach/mx35.h |  1 +
 3 files changed, 16 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
index cde1b079242..8a577f36725 100644
--- a/arch/arm/mach-mx3/devices.c
+++ b/arch/arm/mach-mx3/devices.c
@@ -366,8 +366,8 @@ struct platform_device mx3_camera = {
 
 static struct resource otg_resources[] = {
 	{
-		.start	= OTG_BASE_ADDR,
-		.end	= OTG_BASE_ADDR + 0x1ff,
+		.start	= MX31_OTG_BASE_ADDR,
+		.end	= MX31_OTG_BASE_ADDR + 0x1ff,
 		.flags	= IORESOURCE_MEM,
 	}, {
 		.start	= MXC_INT_USB3,
@@ -408,8 +408,8 @@ static u64 usbh1_dmamask = ~(u32)0;
 
 static struct resource mxc_usbh1_resources[] = {
 	{
-		.start = OTG_BASE_ADDR + 0x200,
-		.end = OTG_BASE_ADDR + 0x3ff,
+		.start = MX31_OTG_BASE_ADDR + 0x200,
+		.end = MX31_OTG_BASE_ADDR + 0x3ff,
 		.flags = IORESOURCE_MEM,
 	}, {
 		.start = MXC_INT_USB1,
@@ -434,8 +434,8 @@ static u64 usbh2_dmamask = ~(u32)0;
 
 static struct resource mxc_usbh2_resources[] = {
 	{
-		.start = OTG_BASE_ADDR + 0x400,
-		.end = OTG_BASE_ADDR + 0x5ff,
+		.start = MX31_OTG_BASE_ADDR + 0x400,
+		.end = MX31_OTG_BASE_ADDR + 0x5ff,
 		.flags = IORESOURCE_MEM,
 	}, {
 		.start = MXC_INT_USB2,
@@ -547,6 +547,14 @@ static int mx3_devices_init(void)
 	if (cpu_is_mx35()) {
 		mxc_nand_resources[0].start = MX35_NFC_BASE_ADDR;
 		mxc_nand_resources[0].end = MX35_NFC_BASE_ADDR + 0xfff;
+		otg_resources[0].start = MX35_OTG_BASE_ADDR;
+		otg_resources[0].end = MX35_OTG_BASE_ADDR + 0x1ff;
+		otg_resources[1].start = MXC_INT_USBOTG;
+		otg_resources[1].end = MXC_INT_USBOTG;
+		mxc_usbh1_resources[0].start = MX35_OTG_BASE_ADDR + 0x400;
+		mxc_usbh1_resources[0].end = MX35_OTG_BASE_ADDR + 0x5ff;
+		mxc_usbh1_resources[1].start = MXC_INT_USBHS;
+		mxc_usbh1_resources[1].end = MXC_INT_USBHS;
 	}
 
 	return 0;
diff --git a/arch/arm/plat-mxc/include/mach/mx31.h b/arch/arm/plat-mxc/include/mach/mx31.h
index 0b06941b613..14ac0dcc82f 100644
--- a/arch/arm/plat-mxc/include/mach/mx31.h
+++ b/arch/arm/plat-mxc/include/mach/mx31.h
@@ -4,7 +4,7 @@
 #define MX31_IRAM_BASE_ADDR		0x1FFC0000	/* internal ram */
 #define MX31_IRAM_SIZE			SZ_16K
 
-#define OTG_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00088000)
+#define MX31_OTG_BASE_ADDR	(AIPS1_BASE_ADDR + 0x00088000)
 #define ATA_BASE_ADDR		(AIPS1_BASE_ADDR + 0x0008C000)
 #define UART4_BASE_ADDR 	(AIPS1_BASE_ADDR + 0x000B0000)
 #define UART5_BASE_ADDR 	(AIPS1_BASE_ADDR + 0x000B4000)
diff --git a/arch/arm/plat-mxc/include/mach/mx35.h b/arch/arm/plat-mxc/include/mach/mx35.h
index 6465fefb42e..ab4cfec6c8a 100644
--- a/arch/arm/plat-mxc/include/mach/mx35.h
+++ b/arch/arm/plat-mxc/include/mach/mx35.h
@@ -5,6 +5,7 @@
 #define MX35_IRAM_SIZE		SZ_128K
 
 #define MXC_FEC_BASE_ADDR	0x50038000
+#define MX35_OTG_BASE_ADDR	0x53ff4000
 #define MX35_NFC_BASE_ADDR	0xBB000000
 
 /*
-- 
cgit v1.2.3


From 3fd2691a1dc80e42e6524bcbc228b1d35424d013 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Fri, 20 Mar 2009 19:25:01 +0100
Subject: MX31 Fix spi clock names

Fix the SPI clock names to match the device names.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/clock.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock.c
index 4742554e996..06bd6180bfc 100644
--- a/arch/arm/mach-mx3/clock.c
+++ b/arch/arm/mach-mx3/clock.c
@@ -525,9 +525,9 @@ DEFINE_CLOCK(ckil_clk,    0, NULL,          0, clk_ckil_get_rate, NULL, NULL);
 
 static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK(NULL, "emi", emi_clk)
-	_REGISTER_CLOCK(NULL, "cspi", cspi1_clk)
-	_REGISTER_CLOCK(NULL, "cspi", cspi2_clk)
-	_REGISTER_CLOCK(NULL, "cspi", cspi3_clk)
+	_REGISTER_CLOCK("spi_imx.0", NULL, cspi1_clk)
+	_REGISTER_CLOCK("spi_imx.1", NULL, cspi2_clk)
+	_REGISTER_CLOCK("spi_imx.2", NULL, cspi3_clk)
 	_REGISTER_CLOCK(NULL, "gpt", gpt_clk)
 	_REGISTER_CLOCK(NULL, "pwm", pwm_clk)
 	_REGISTER_CLOCK(NULL, "wdog", wdog_clk)
-- 
cgit v1.2.3


From 0160651a65d091f9fb3b7955347e04c1125765f8 Mon Sep 17 00:00:00 2001
From: Luotao Fu <l.fu@pengutronix.de>
Date: Thu, 18 Jun 2009 12:21:51 +0200
Subject: pcm038: mux configuration for predefined gpio line

Signed-off-by: Luotao Fu <l.fu@pengutronix.de>
---
 arch/arm/mach-mx2/pcm038.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-mx2/pcm038.c b/arch/arm/mach-mx2/pcm038.c
index 9a3483c8f58..ee65dda584c 100644
--- a/arch/arm/mach-mx2/pcm038.c
+++ b/arch/arm/mach-mx2/pcm038.c
@@ -216,6 +216,9 @@ static void __init pcm038_init(void)
 
 	mxc_register_device(&mxc_i2c_device1, &pcm038_i2c_1_data);
 
+	/* PE18 for user-LED D40 */
+	mxc_gpio_mode(GPIO_PORTE | 18 | GPIO_GPIO | GPIO_OUT);
+
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 
 #ifdef CONFIG_MACH_PCM970_BASEBOARD
-- 
cgit v1.2.3


From 8d5c1ed3f639f6ae012332d8ccdff429f3f11823 Mon Sep 17 00:00:00 2001
From: Luotao Fu <l.fu@pengutronix.de>
Date: Thu, 18 Jun 2009 14:15:22 +0200
Subject: pcm043: mux configuration for predefined gpio line

Signed-off-by: Luotao Fu <l.fu@pengutronix.de>
---
 arch/arm/mach-mx3/pcm043.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-mx3/pcm043.c b/arch/arm/mach-mx3/pcm043.c
index e43276ea3b7..e18a224671f 100644
--- a/arch/arm/mach-mx3/pcm043.c
+++ b/arch/arm/mach-mx3/pcm043.c
@@ -202,7 +202,8 @@ static struct pad_desc pcm043_pads[] = {
 	MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC,
 	MX35_PAD_D3_REV__IPU_DISPB_D3_REV,
 	MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS,
-	MX35_PAD_D3_SPL__IPU_DISPB_D3_SPL
+	/* gpio */
+	MX35_PAD_ATA_CS0__GPIO2_6,
 };
 
 /*
-- 
cgit v1.2.3


From e0fd4db372896d74e63097ee6463f97736440529 Mon Sep 17 00:00:00 2001
From: Luotao Fu <l.fu@pengutronix.de>
Date: Thu, 18 Jun 2009 16:44:18 +0200
Subject: pcm037: mux configuration for predefined gpio line

Signed-off-by: Luotao Fu <l.fu@pengutronix.de>
---
 arch/arm/mach-mx3/pcm037.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c
index b1b3282d15d..6cbaabedf38 100644
--- a/arch/arm/mach-mx3/pcm037.c
+++ b/arch/arm/mach-mx3/pcm037.c
@@ -170,6 +170,8 @@ static unsigned int pcm037_pins[] = {
 	MX31_PIN_CSI_MCLK__CSI_MCLK,
 	MX31_PIN_CSI_PIXCLK__CSI_PIXCLK,
 	MX31_PIN_CSI_VSYNC__CSI_VSYNC,
+	/* GPIO */
+	IOMUX_MODE(MX31_PIN_ATA_DMACK, IOMUX_CONFIG_GPIO),
 };
 
 static struct physmap_flash_data pcm037_flash_data = {
-- 
cgit v1.2.3


From 4bd1527a64f847a8aaec4f6055d9498db2646626 Mon Sep 17 00:00:00 2001
From: Valentin Longchamp <valentin.longchamp@epfl.ch>
Date: Wed, 12 Aug 2009 11:29:18 +0200
Subject: mx31: define various GPIOs used on mx31moboard

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/plat-mxc/include/mach/iomux-mx3.h | 11 +++++++++++
 1 file changed, 11 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
index 67452732794..446f8676381 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
@@ -683,6 +683,17 @@ enum iomux_pins {
 #define MX31_PIN_GPIO3_1__GPIO3_1	IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_TXD2__GPIO1_28		IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_GPIO1_0__GPIO1_0	IOMUX_MODE(MX31_PIN_GPIO1_0, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_SVEN0__GPIO2_0		IOMUX_MODE(MX31_PIN_SVEN0, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_STX0__GPIO2_1		IOMUX_MODE(MX31_PIN_STX0, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_SRX0__GPIO2_2		IOMUX_MODE(MX31_PIN_SRX0, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_SIMPD0__GPIO2_3	IOMUX_MODE(MX31_PIN_SIMPD0, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_DTR_DCE1__GPIO2_8	IOMUX_MODE(MX31_PIN_DTR_DCE1, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_DSR_DCE1__GPIO2_9	IOMUX_MODE(MX31_PIN_DSR_DCE1, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_RI_DCE1__GPIO2_10	IOMUX_MODE(MX31_PIN_RI_DCE1, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_DCD_DCE1__GPIO2_11	IOMUX_MODE(MX31_PIN_DCD_DCE1, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_STXD5__GPIO1_21       IOMUX_MODE(MX31_PIN_STXD5, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_SRXD5__GPIO1_22       IOMUX_MODE(MX31_PIN_SRXD5, IOMUX_CONFIG_GPIO)
+
 
 /*XXX: The SS0, SS1, SS2, SS3 lines of spi3 are multiplexed by cspi2_ss0, cspi2_ss1, cspi1_ss0
  * cspi1_ss1*/
-- 
cgit v1.2.3


From 77aa561db19229a36859018277f41be88684b487 Mon Sep 17 00:00:00 2001
From: Valentin Longchamp <valentin.longchamp@epfl.ch>
Date: Wed, 12 Aug 2009 11:29:19 +0200
Subject: mx31moboard: support for the 4 leds used on mx31moboard

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/mx31moboard.c | 35 +++++++++++++++++++++++++++++++++++
 1 file changed, 35 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-mx3/mx31moboard.c b/arch/arm/mach-mx3/mx31moboard.c
index 2852bd58eda..ac337d26409 100644
--- a/arch/arm/mach-mx3/mx31moboard.c
+++ b/arch/arm/mach-mx3/mx31moboard.c
@@ -21,6 +21,7 @@
 #include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
+#include <linux/leds.h>
 #include <linux/memory.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mtd/partitions.h>
@@ -72,6 +73,9 @@ static unsigned int moboard_pins[] = {
 	MX31_PIN_USBOTG_CLK__USBOTG_CLK, MX31_PIN_USBOTG_DIR__USBOTG_DIR,
 	MX31_PIN_USBOTG_NXT__USBOTG_NXT, MX31_PIN_USBOTG_STP__USBOTG_STP,
 	MX31_PIN_USB_OC__GPIO1_30,
+	/* LEDs */
+	MX31_PIN_SVEN0__GPIO2_0, MX31_PIN_STX0__GPIO2_1,
+	MX31_PIN_SRX0__GPIO2_2, MX31_PIN_SIMPD0__GPIO2_3,
 };
 
 static struct physmap_flash_data mx31moboard_flash_data = {
@@ -201,8 +205,39 @@ static struct fsl_usb2_platform_data usb_pdata = {
 	.phy_mode	= FSL_USB2_PHY_ULPI,
 };
 
+static struct gpio_led mx31moboard_leds[] = {
+	{
+		.name 	= "coreboard-led-0:red:running",
+		.default_trigger = "heartbeat",
+		.gpio 	= IOMUX_TO_GPIO(MX31_PIN_SVEN0),
+	}, {
+		.name	= "coreboard-led-1:red",
+		.gpio	= IOMUX_TO_GPIO(MX31_PIN_STX0),
+	}, {
+		.name	= "coreboard-led-2:red",
+		.gpio	= IOMUX_TO_GPIO(MX31_PIN_SRX0),
+	}, {
+		.name	= "coreboard-led-3:red",
+		.gpio	= IOMUX_TO_GPIO(MX31_PIN_SIMPD0),
+	},
+};
+
+static struct gpio_led_platform_data mx31moboard_led_pdata = {
+	.num_leds 	= ARRAY_SIZE(mx31moboard_leds),
+	.leds		= mx31moboard_leds,
+};
+
+static struct platform_device mx31moboard_leds_device = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &mx31moboard_led_pdata,
+	},
+};
+
 static struct platform_device *devices[] __initdata = {
 	&mx31moboard_flash,
+	&mx31moboard_leds_device,
 };
 
 static int mx31moboard_baseboard;
-- 
cgit v1.2.3


From 8b1a540c245d68a77dbd909359cfc709b6a3a1bf Mon Sep 17 00:00:00 2001
From: Valentin Longchamp <valentin.longchamp@epfl.ch>
Date: Wed, 12 Aug 2009 11:29:20 +0200
Subject: mx31moboard: initialize 4 input gpios for mx31moboard

These gpios are exported to userspace and are here to be used as
a selector

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/mx31moboard.c | 33 +++++++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-mx3/mx31moboard.c b/arch/arm/mach-mx3/mx31moboard.c
index ac337d26409..d3c6bb26271 100644
--- a/arch/arm/mach-mx3/mx31moboard.c
+++ b/arch/arm/mach-mx3/mx31moboard.c
@@ -76,6 +76,9 @@ static unsigned int moboard_pins[] = {
 	/* LEDs */
 	MX31_PIN_SVEN0__GPIO2_0, MX31_PIN_STX0__GPIO2_1,
 	MX31_PIN_SRX0__GPIO2_2, MX31_PIN_SIMPD0__GPIO2_3,
+	/* SEL */
+	MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9,
+	MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11,
 };
 
 static struct physmap_flash_data mx31moboard_flash_data = {
@@ -235,6 +238,34 @@ static struct platform_device mx31moboard_leds_device = {
 	},
 };
 
+#define SEL0 IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1)
+#define SEL1 IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1)
+#define SEL2 IOMUX_TO_GPIO(MX31_PIN_RI_DCE1)
+#define SEL3 IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)
+
+static void mx31moboard_init_sel_gpios(void)
+{
+	if (!gpio_request(SEL0, "sel0")) {
+		gpio_direction_input(SEL0);
+		gpio_export(SEL0, true);
+	}
+
+	if (!gpio_request(SEL1, "sel1")) {
+		gpio_direction_input(SEL1);
+		gpio_export(SEL1, true);
+	}
+
+	if (!gpio_request(SEL2, "sel2")) {
+		gpio_direction_input(SEL2);
+		gpio_export(SEL2, true);
+	}
+
+	if (!gpio_request(SEL3, "sel3")) {
+		gpio_direction_input(SEL3);
+		gpio_export(SEL3, true);
+	}
+}
+
 static struct platform_device *devices[] __initdata = {
 	&mx31moboard_flash,
 	&mx31moboard_leds_device,
@@ -256,6 +287,8 @@ static void __init mxc_board_init(void)
 	mxc_register_device(&mxc_uart_device0, &uart_pdata);
 	mxc_register_device(&mxc_uart_device4, &uart_pdata);
 
+	mx31moboard_init_sel_gpios();
+
 	mxc_register_device(&mxc_i2c_device0, &moboard_i2c0_pdata);
 	mxc_register_device(&mxc_i2c_device1, &moboard_i2c1_pdata);
 
-- 
cgit v1.2.3


From 2718c15c5fffa9d05e5076451ab4fc81caac313f Mon Sep 17 00:00:00 2001
From: Valentin Longchamp <valentin.longchamp@epfl.ch>
Date: Wed, 12 Aug 2009 11:29:21 +0200
Subject: mx31moboard: two GPIOS are used to reset other microcontrolers on the
 robot

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx3/mx31moboard-marxbot.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c
index 53ce7ff0637..3e2b73051b9 100644
--- a/arch/arm/mach-mx3/mx31moboard-marxbot.c
+++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c
@@ -47,6 +47,8 @@ static unsigned int marxbot_pins[] = {
 	MX31_PIN_CSI_PIXCLK__CSI_PIXCLK, MX31_PIN_CSI_VSYNC__CSI_VSYNC,
 	MX31_PIN_GPIO3_0__GPIO3_0, MX31_PIN_GPIO3_1__GPIO3_1,
 	MX31_PIN_TXD2__GPIO1_28,
+	/* dsPIC resets */
+	MX31_PIN_STXD5__GPIO1_21, MX31_PIN_SRXD5__GPIO1_22,
 };
 
 #define SDHC2_CD IOMUX_TO_GPIO(MX31_PIN_ATA_DIOR)
@@ -102,6 +104,22 @@ static struct imxmmc_platform_data sdhc2_pdata = {
 	.exit	= marxbot_sdhc2_exit,
 };
 
+#define TRSLAT_RST_B	IOMUX_TO_GPIO(MX31_PIN_STXD5)
+#define DSPICS_RST_B	IOMUX_TO_GPIO(MX31_PIN_SRXD5)
+
+static void dspics_resets_init(void)
+{
+	if (!gpio_request(TRSLAT_RST_B, "translator-rst")) {
+		gpio_direction_output(TRSLAT_RST_B, 1);
+		gpio_export(TRSLAT_RST_B, false);
+	}
+
+	if (!gpio_request(DSPICS_RST_B, "dspics-rst")) {
+		gpio_direction_output(DSPICS_RST_B, 1);
+		gpio_export(DSPICS_RST_B, false);
+	}
+}
+
 /*
  * system init for baseboard usage. Will be called by mx31moboard init.
  */
@@ -112,5 +130,7 @@ void __init mx31moboard_marxbot_init(void)
 	mxc_iomux_setup_multiple_pins(marxbot_pins, ARRAY_SIZE(marxbot_pins),
 		"marxbot");
 
+	dspics_resets_init();
+
 	mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata);
 }
-- 
cgit v1.2.3


From f6d2fa7dcbd438da4d150f695ebd219419a325ce Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Thu, 13 Aug 2009 10:02:30 +0200
Subject: MX21: Compilation fix for devices.c

The OTG devices are only available on i.MX27, so ifdef
them out for i.MX21.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx2/devices.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-mx2/devices.c b/arch/arm/mach-mx2/devices.c
index 62810cbe4e3..50199aff014 100644
--- a/arch/arm/mach-mx2/devices.c
+++ b/arch/arm/mach-mx2/devices.c
@@ -437,6 +437,7 @@ struct platform_device mxc_sdhc_device1 = {
        .resource       = mxc_sdhc2_resources,
 };
 
+#ifdef CONFIG_MACH_MX27
 static struct resource otg_resources[] = {
 	{
 		.start	= OTG_BASE_ADDR,
@@ -527,7 +528,7 @@ struct platform_device mxc_usbh2 = {
 	.resource = mxc_usbh2_resources,
 	.num_resources = ARRAY_SIZE(mxc_usbh2_resources),
 };
-
+#endif
 
 /* GPIO port description */
 static struct mxc_gpio_port imx_gpio_ports[] = {
-- 
cgit v1.2.3


From c35d3a418149f145ff0d90833db3e298e88de1ad Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Thu, 13 Aug 2009 10:04:44 +0200
Subject: mx21ads: Fix framebuffer platform data

struct imx_fb_platform_data has changed and the mx21ads was
forgotten to change. Fix it.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-mx2/mx21ads.c | 44 ++++++++++++++++++++++++++------------------
 1 file changed, 26 insertions(+), 18 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-mx2/mx21ads.c b/arch/arm/mach-mx2/mx21ads.c
index a525783ceea..cf5f77cbc2f 100644
--- a/arch/arm/mach-mx2/mx21ads.c
+++ b/arch/arm/mach-mx2/mx21ads.c
@@ -164,25 +164,33 @@ static void mx21ads_fb_exit(struct platform_device *pdev)
  * Connected is a portrait Sharp-QVGA display
  * of type: LQ035Q7DB02
  */
+static struct imx_fb_videomode mx21ads_modes[] = {
+	{
+		.mode = {
+			.name		= "Sharp-LQ035Q7",
+			.refresh	= 60,
+			.xres		= 240,
+			.yres		= 320,
+			.pixclock	= 188679, /* in ps (5.3MHz) */
+			.hsync_len	= 2,
+			.left_margin	= 6,
+			.right_margin	= 16,
+			.vsync_len	= 1,
+			.upper_margin	= 8,
+			.lower_margin	= 10,
+		},
+		.pcr		= 0xfb108bc7,
+		.bpp		= 16,
+	},
+};
+
 static struct imx_fb_platform_data mx21ads_fb_data = {
-	.pixclock       = 188679, /* in ps */
-	.xres           = 240,
-	.yres           = 320,
-
-	.bpp            = 16,
-	.hsync_len      = 2,
-	.left_margin    = 6,
-	.right_margin   = 16,
-
-	.vsync_len      = 1,
-	.upper_margin   = 8,
-	.lower_margin   = 10,
-	.fixed_screen_cpu = 0,
-
-	.pcr            = 0xFB108BC7,
-	.pwmr           = 0x00A901ff,
-	.lscr1          = 0x00120300,
-	.dmacr          = 0x00020008,
+	.mode = mx21ads_modes,
+	.num_modes = ARRAY_SIZE(mx21ads_modes),
+
+	.pwmr		= 0x00a903ff,
+	.lscr1		= 0x00120300,
+	.dmacr		= 0x00020008,
 
 	.init = mx21ads_fb_init,
 	.exit = mx21ads_fb_exit,
-- 
cgit v1.2.3


From 58c41d28259c246dbc11358d85d332dc20ccd57b Mon Sep 17 00:00:00 2001
From: "H. Peter Anvin" <hpa@zytor.com>
Date: Fri, 14 Aug 2009 12:14:19 -0700
Subject: x86, intel_txt: Factor out the code for S3 setup

S3 sleep requires special setup in tboot.  However, the data
structures needed to do such setup are only available if
CONFIG_ACPI_SLEEP is enabled.  Abstract them out as much as possible,
so we can have a single tboot_setup_sleep() which either is a proper
implementation or a stub which simply calls BUG().

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Acked-by: Shane Wang <shane.wang@intel.com>
Cc: Joseph Cihula <joseph.cihula@intel.com>
---
 arch/x86/kernel/tboot.c | 53 +++++++++++++++++++++++++++++++++++++------------
 1 file changed, 40 insertions(+), 13 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/tboot.c b/arch/x86/kernel/tboot.c
index 1ab80120894..a183beffe39 100644
--- a/arch/x86/kernel/tboot.c
+++ b/arch/x86/kernel/tboot.c
@@ -34,6 +34,7 @@
 #include <asm/pgtable.h>
 #include <asm/pgalloc.h>
 #include <asm/fixmap.h>
+#include <asm/proto.h>
 #include <asm/setup.h>
 #include <asm/tboot.h>
 #include <asm/e820.h>
@@ -164,25 +165,51 @@ void tboot_create_trampoline(void)
 	map_base = PFN_DOWN(tboot->tboot_base);
 	map_size = PFN_UP(tboot->tboot_size);
 	if (map_tboot_pages(map_base << PAGE_SHIFT, map_base, map_size))
-		panic("tboot: Error mapping tboot pages (mfns) @ 0x%x, 0x%x\n", map_base, map_size);
+		panic("tboot: Error mapping tboot pages (mfns) @ 0x%x, 0x%x\n",
+		      map_base, map_size);
 }
 
-static void set_mac_regions(void)
+#ifdef CONFIG_ACPI_SLEEP
+
+static void add_mac_region(phys_addr_t start, unsigned long size)
 {
-	tboot->num_mac_regions = 3;
+	struct tboot_mac_region *mr;
+	phys_addr_t end = start + size;
+
+	if (start && size) {
+		mr = &tboot->mac_regions[tboot->num_mac_regions++];
+		mr->start = round_down(start, PAGE_SIZE);
+		mr->size  = round_up(end, PAGE_SIZE) - mr->start;
+	}
+}
+
+static int tboot_setup_sleep(void)
+{
+	tboot->num_mac_regions = 0;
+
 	/* S3 resume code */
-	tboot->mac_regions[0].start = PFN_PHYS(PFN_DOWN(acpi_wakeup_address));
-	tboot->mac_regions[0].size = PFN_UP(WAKEUP_SIZE) << PAGE_SHIFT;
+	add_mac_region(acpi_wakeup_address, WAKEUP_SIZE);
 	/* AP trampoline code */
-	tboot->mac_regions[1].start =
-			PFN_PHYS(PFN_DOWN(virt_to_phys(trampoline_base)));
-	tboot->mac_regions[1].size = PFN_UP(TRAMPOLINE_SIZE) << PAGE_SHIFT;
+	add_mac_region(virt_to_phys(trampoline_base), TRAMPOLINE_SIZE);
 	/* kernel code + data + bss */
-	tboot->mac_regions[2].start = PFN_PHYS(PFN_DOWN(virt_to_phys(&_text)));
-	tboot->mac_regions[2].size = PFN_PHYS(PFN_UP(virt_to_phys(&_end))) -
-				     PFN_PHYS(PFN_DOWN(virt_to_phys(&_text)));
+	add_mac_region(virt_to_phys(_text), _end - _text);
+
+	tboot->acpi_sinfo.kernel_s3_resume_vector = acpi_wakeup_address;
+
+	return 0;
 }
 
+#else /* no CONFIG_ACPI_SLEEP */
+
+static int tboot_setup_sleep(void)
+{
+	/* S3 shutdown requested, but S3 not supported by the kernel... */
+	BUG();
+	return -1;
+}
+
+#endif
+
 void tboot_shutdown(u32 shutdown_type)
 {
 	void (*shutdown)(void);
@@ -200,7 +227,8 @@ void tboot_shutdown(u32 shutdown_type)
 
 	/* if this is S3 then set regions to MAC */
 	if (shutdown_type == TB_SHUTDOWN_S3)
-		set_mac_regions();
+		if (tboot_setup_sleep())
+			return;
 
 	tboot->shutdown_type = shutdown_type;
 
@@ -253,7 +281,6 @@ void tboot_sleep(u8 sleep_state, u32 pm1a_control, u32 pm1b_control)
 	tboot->acpi_sinfo.pm1b_cnt_val = pm1b_control;
 	/* we always use the 32b wakeup vector */
 	tboot->acpi_sinfo.vector_width = 32;
-	tboot->acpi_sinfo.kernel_s3_resume_vector = acpi_wakeup_address;
 
 	if (sleep_state >= ACPI_S_STATE_COUNT ||
 	    acpi_shutdown_map[sleep_state] == -1) {
-- 
cgit v1.2.3


From 369842658a36bcea28ecb643ba4bdb53919330dd Mon Sep 17 00:00:00 2001
From: Mikael Pettersson <mikpe@it.uu.se>
Date: Sat, 15 Aug 2009 12:58:11 +0100
Subject: ARM: 5677/1: ARM support for
 TIF_RESTORE_SIGMASK/pselect6/ppoll/epoll_pwait

This patch adds support for TIF_RESTORE_SIGMASK to ARM's
signal handling, which allows to hook up the pselect6, ppoll,
and epoll_pwait syscalls on ARM.

Tested here with eabi userspace and a test program with a
deliberate race between a child's exit and the parent's
sigprocmask/select sequence. Using sys_pselect6() instead
of sigprocmask/select reliably prevents the race.

The other arch's support for TIF_RESTORE_SIGMASK has evolved
over time:

In 2.6.16:
- add TIF_RESTORE_SIGMASK which parallels TIF_SIGPENDING
- test both when checking for pending signal [changed later]
- reimplement sys_sigsuspend() to use current->saved_sigmask,
  TIF_RESTORE_SIGMASK [changed later], and -ERESTARTNOHAND;
  ditto for sys_rt_sigsuspend(), but drop private code and
  use common code via __ARCH_WANT_SYS_RT_SIGSUSPEND;
- there are now no "extra" calls to do_signal() so its oldset
  parameter is always &current->blocked so need not be passed,
  also its return value is changed to void
- change handle_signal() to return 0/-errno
- change do_signal() to honor TIF_RESTORE_SIGMASK:
  + get oldset from current->saved_sigmask if TIF_RESTORE_SIGMASK
    is set
  + if handle_signal() was successful then clear TIF_RESTORE_SIGMASK
  + if no signal was delivered and TIF_RESTORE_SIGMASK is set then
    clear it and restore the sigmask
- hook up sys_pselect6() and sys_ppoll()

In 2.6.19:
- hook up sys_epoll_pwait()

In 2.6.26:
- allow archs to override how TIF_RESTORE_SIGMASK is implemented;
  default set_restore_sigmask() sets both TIF_RESTORE_SIGMASK and
  TIF_SIGPENDING; archs need now just test TIF_SIGPENDING again
  when checking for pending signal work; some archs now implement
  TIF_RESTORE_SIGMASK as a secondary/non-atomic thread flag bit
- call set_restore_sigmask() in sys_sigsuspend() instead of setting
  TIF_RESTORE_SIGMASK

In 2.6.29-rc:
- kill sys_pselect7() which no arch wanted

So for 2.6.31-rc6/ARM this patch does the following:
- Add TIF_RESTORE_SIGMASK. Use the generic set_restore_sigmask()
  which sets both TIF_SIGPENDING and TIF_RESTORE_SIGMASK, so
  TIF_RESTORE_SIGMASK need not claim one of the scarce low thread
  flags, and existing TIF_SIGPENDING and _TIF_WORK_MASK tests need
  not be extended for TIF_RESTORE_SIGMASK.
- sys_sigsuspend() is reimplemented to use current->saved_sigmask
  and set_restore_sigmask(), making it identical to most other archs
- The private code for sys_rt_sigsuspend() is removed, instead
  generic code supplies it via __ARCH_WANT_SYS_RT_SIGSUSPEND.
- sys_sigsuspend() and sys_rt_sigsuspend() no longer need a pt_regs
  parameter, so their assembly code wrappers are removed.
- handle_signal() is changed to return 0 on success or -errno.
- The oldset parameter to do_signal() is now redundant and removed,
  and the return value is now also redundant and changed to void.
- do_signal() is changed to honor TIF_RESTORE_SIGMASK:
  + get oldset from current->saved_sigmask if TIF_RESTORE_SIGMASK
    is set
  + if handle_signal() was successful then clear TIF_RESTORE_SIGMASK
  + if no signal was delivered and TIF_RESTORE_SIGMASK is set then
    clear it and restore the sigmask
- Hook up sys_pselect6, sys_ppoll, and sys_epoll_pwait.

Signed-off-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/thread_info.h |  2 +
 arch/arm/include/asm/unistd.h      |  7 ++--
 arch/arm/kernel/calls.S            | 10 ++---
 arch/arm/kernel/entry-common.S     | 10 -----
 arch/arm/kernel/signal.c           | 86 ++++++++++++++++----------------------
 5 files changed, 48 insertions(+), 67 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h
index 73394e50cbc..e20d80539b4 100644
--- a/arch/arm/include/asm/thread_info.h
+++ b/arch/arm/include/asm/thread_info.h
@@ -140,6 +140,7 @@ extern void vfp_sync_state(struct thread_info *thread);
 #define TIF_USING_IWMMXT	17
 #define TIF_MEMDIE		18
 #define TIF_FREEZE		19
+#define TIF_RESTORE_SIGMASK	20
 
 #define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
 #define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
@@ -147,6 +148,7 @@ extern void vfp_sync_state(struct thread_info *thread);
 #define _TIF_POLLING_NRFLAG	(1 << TIF_POLLING_NRFLAG)
 #define _TIF_USING_IWMMXT	(1 << TIF_USING_IWMMXT)
 #define _TIF_FREEZE		(1 << TIF_FREEZE)
+#define _TIF_RESTORE_SIGMASK	(1 << TIF_RESTORE_SIGMASK)
 
 /*
  * Change these and you break ASM code in entry-common.S
diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h
index 0e97b8cb77d..9122c9ee18f 100644
--- a/arch/arm/include/asm/unistd.h
+++ b/arch/arm/include/asm/unistd.h
@@ -360,8 +360,8 @@
 #define __NR_readlinkat			(__NR_SYSCALL_BASE+332)
 #define __NR_fchmodat			(__NR_SYSCALL_BASE+333)
 #define __NR_faccessat			(__NR_SYSCALL_BASE+334)
-					/* 335 for pselect6 */
-					/* 336 for ppoll */
+#define __NR_pselect6			(__NR_SYSCALL_BASE+335)
+#define __NR_ppoll			(__NR_SYSCALL_BASE+336)
 #define __NR_unshare			(__NR_SYSCALL_BASE+337)
 #define __NR_set_robust_list		(__NR_SYSCALL_BASE+338)
 #define __NR_get_robust_list		(__NR_SYSCALL_BASE+339)
@@ -372,7 +372,7 @@
 #define __NR_vmsplice			(__NR_SYSCALL_BASE+343)
 #define __NR_move_pages			(__NR_SYSCALL_BASE+344)
 #define __NR_getcpu			(__NR_SYSCALL_BASE+345)
-					/* 346 for epoll_pwait */
+#define __NR_epoll_pwait		(__NR_SYSCALL_BASE+346)
 #define __NR_kexec_load			(__NR_SYSCALL_BASE+347)
 #define __NR_utimensat			(__NR_SYSCALL_BASE+348)
 #define __NR_signalfd			(__NR_SYSCALL_BASE+349)
@@ -432,6 +432,7 @@
 #define __ARCH_WANT_SYS_SIGPENDING
 #define __ARCH_WANT_SYS_SIGPROCMASK
 #define __ARCH_WANT_SYS_RT_SIGACTION
+#define __ARCH_WANT_SYS_RT_SIGSUSPEND
 
 #if !defined(CONFIG_AEABI) || defined(CONFIG_OABI_COMPAT)
 #define __ARCH_WANT_SYS_TIME
diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S
index f776e72a4cb..ecfa98954d1 100644
--- a/arch/arm/kernel/calls.S
+++ b/arch/arm/kernel/calls.S
@@ -81,7 +81,7 @@
 		CALL(sys_ni_syscall)		/* was sys_ssetmask */
 /* 70 */	CALL(sys_setreuid16)
 		CALL(sys_setregid16)
-		CALL(sys_sigsuspend_wrapper)
+		CALL(sys_sigsuspend)
 		CALL(sys_sigpending)
 		CALL(sys_sethostname)
 /* 75 */	CALL(sys_setrlimit)
@@ -188,7 +188,7 @@
 		CALL(sys_rt_sigpending)
 		CALL(sys_rt_sigtimedwait)
 		CALL(sys_rt_sigqueueinfo)
-		CALL(sys_rt_sigsuspend_wrapper)
+		CALL(sys_rt_sigsuspend)
 /* 180 */	CALL(ABI(sys_pread64, sys_oabi_pread64))
 		CALL(ABI(sys_pwrite64, sys_oabi_pwrite64))
 		CALL(sys_chown16)
@@ -344,8 +344,8 @@
 		CALL(sys_readlinkat)
 		CALL(sys_fchmodat)
 		CALL(sys_faccessat)
-/* 335 */	CALL(sys_ni_syscall)		/* eventually pselect6 */
-		CALL(sys_ni_syscall)		/* eventually ppoll */
+/* 335 */	CALL(sys_pselect6)
+		CALL(sys_ppoll)
 		CALL(sys_unshare)
 		CALL(sys_set_robust_list)
 		CALL(sys_get_robust_list)
@@ -355,7 +355,7 @@
 		CALL(sys_vmsplice)
 		CALL(sys_move_pages)
 /* 345 */	CALL(sys_getcpu)
-		CALL(sys_ni_syscall)		/* eventually epoll_pwait */
+		CALL(sys_epoll_pwait)
 		CALL(sys_kexec_load)
 		CALL(sys_utimensat)
 		CALL(sys_signalfd)
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 366e5097a41..bfa7f0af7ed 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -373,16 +373,6 @@ sys_clone_wrapper:
 		b	sys_clone
 ENDPROC(sys_clone_wrapper)
 
-sys_sigsuspend_wrapper:
-		add	r3, sp, #S_OFF
-		b	sys_sigsuspend
-ENDPROC(sys_sigsuspend_wrapper)
-
-sys_rt_sigsuspend_wrapper:
-		add	r2, sp, #S_OFF
-		b	sys_rt_sigsuspend
-ENDPROC(sys_rt_sigsuspend_wrapper)
-
 sys_sigreturn_wrapper:
 		add	r0, sp, #S_OFF
 		b	sys_sigreturn
diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c
index 93bb4247b7e..e27ee1f701d 100644
--- a/arch/arm/kernel/signal.c
+++ b/arch/arm/kernel/signal.c
@@ -47,57 +47,22 @@ const unsigned long sigreturn_codes[7] = {
 	MOV_R7_NR_RT_SIGRETURN, SWI_SYS_RT_SIGRETURN, SWI_THUMB_RT_SIGRETURN,
 };
 
-static int do_signal(sigset_t *oldset, struct pt_regs * regs, int syscall);
-
 /*
  * atomically swap in the new signal mask, and wait for a signal.
  */
-asmlinkage int sys_sigsuspend(int restart, unsigned long oldmask, old_sigset_t mask, struct pt_regs *regs)
+asmlinkage int sys_sigsuspend(int restart, unsigned long oldmask, old_sigset_t mask)
 {
-	sigset_t saveset;
-
 	mask &= _BLOCKABLE;
 	spin_lock_irq(&current->sighand->siglock);
-	saveset = current->blocked;
+	current->saved_sigmask = current->blocked;
 	siginitset(&current->blocked, mask);
 	recalc_sigpending();
 	spin_unlock_irq(&current->sighand->siglock);
-	regs->ARM_r0 = -EINTR;
-
-	while (1) {
-		current->state = TASK_INTERRUPTIBLE;
-		schedule();
-		if (do_signal(&saveset, regs, 0))
-			return regs->ARM_r0;
-	}
-}
-
-asmlinkage int
-sys_rt_sigsuspend(sigset_t __user *unewset, size_t sigsetsize, struct pt_regs *regs)
-{
-	sigset_t saveset, newset;
-
-	/* XXX: Don't preclude handling different sized sigset_t's. */
-	if (sigsetsize != sizeof(sigset_t))
-		return -EINVAL;
-
-	if (copy_from_user(&newset, unewset, sizeof(newset)))
-		return -EFAULT;
-	sigdelsetmask(&newset, ~_BLOCKABLE);
-
-	spin_lock_irq(&current->sighand->siglock);
-	saveset = current->blocked;
-	current->blocked = newset;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-	regs->ARM_r0 = -EINTR;
 
-	while (1) {
-		current->state = TASK_INTERRUPTIBLE;
-		schedule();
-		if (do_signal(&saveset, regs, 0))
-			return regs->ARM_r0;
-	}
+	current->state = TASK_INTERRUPTIBLE;
+	schedule();
+	set_restore_sigmask();
+	return -ERESTARTNOHAND;
 }
 
 asmlinkage int 
@@ -545,7 +510,7 @@ static inline void setup_syscall_restart(struct pt_regs *regs)
 /*
  * OK, we're invoking a handler
  */	
-static void
+static int
 handle_signal(unsigned long sig, struct k_sigaction *ka,
 	      siginfo_t *info, sigset_t *oldset,
 	      struct pt_regs * regs, int syscall)
@@ -596,7 +561,7 @@ handle_signal(unsigned long sig, struct k_sigaction *ka,
 
 	if (ret != 0) {
 		force_sigsegv(sig, tsk);
-		return;
+		return ret;
 	}
 
 	/*
@@ -610,6 +575,7 @@ handle_signal(unsigned long sig, struct k_sigaction *ka,
 	recalc_sigpending();
 	spin_unlock_irq(&tsk->sighand->siglock);
 
+	return 0;
 }
 
 /*
@@ -621,7 +587,7 @@ handle_signal(unsigned long sig, struct k_sigaction *ka,
  * the kernel can handle, and then we build all the user-level signal handling
  * stack-frames in one go after that.
  */
-static int do_signal(sigset_t *oldset, struct pt_regs *regs, int syscall)
+static void do_signal(struct pt_regs *regs, int syscall)
 {
 	struct k_sigaction ka;
 	siginfo_t info;
@@ -634,7 +600,7 @@ static int do_signal(sigset_t *oldset, struct pt_regs *regs, int syscall)
 	 * if so.
 	 */
 	if (!user_mode(regs))
-		return 0;
+		return;
 
 	if (try_to_freeze())
 		goto no_signal;
@@ -643,9 +609,24 @@ static int do_signal(sigset_t *oldset, struct pt_regs *regs, int syscall)
 
 	signr = get_signal_to_deliver(&info, &ka, regs, NULL);
 	if (signr > 0) {
-		handle_signal(signr, &ka, &info, oldset, regs, syscall);
+		sigset_t *oldset;
+
+		if (test_thread_flag(TIF_RESTORE_SIGMASK))
+			oldset = &current->saved_sigmask;
+		else
+			oldset = &current->blocked;
+		if (handle_signal(signr, &ka, &info, oldset, regs, syscall) == 0) {
+			/*
+			 * A signal was successfully delivered; the saved
+			 * sigmask will have been stored in the signal frame,
+			 * and will be restored by sigreturn, so we can simply
+			 * clear the TIF_RESTORE_SIGMASK flag.
+			 */
+			if (test_thread_flag(TIF_RESTORE_SIGMASK))
+				clear_thread_flag(TIF_RESTORE_SIGMASK);
+		}
 		single_step_set(current);
-		return 1;
+		return;
 	}
 
  no_signal:
@@ -697,14 +678,21 @@ static int do_signal(sigset_t *oldset, struct pt_regs *regs, int syscall)
 		    regs->ARM_r0 == -ERESTARTNOINTR) {
 			setup_syscall_restart(regs);
 		}
+
+		/* If there's no signal to deliver, we just put the saved sigmask
+		 * back.
+		 */
+		if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
+			clear_thread_flag(TIF_RESTORE_SIGMASK);
+			sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
+		}
 	}
 	single_step_set(current);
-	return 0;
 }
 
 asmlinkage void
 do_notify_resume(struct pt_regs *regs, unsigned int thread_flags, int syscall)
 {
 	if (thread_flags & _TIF_SIGPENDING)
-		do_signal(&current->blocked, regs, syscall);
+		do_signal(regs, syscall);
 }
-- 
cgit v1.2.3


From 58b5369e6eb6c889b540a99aa95562a66b25acf1 Mon Sep 17 00:00:00 2001
From: wanzongshun <mcuos.com@gmail.com>
Date: Fri, 14 Aug 2009 15:36:44 +0100
Subject: ARM: 5674/1: Add clocksource/clockevent support for w90p910 platform

Add clocksource/clockevent support for w90p910 platform.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/Kconfig                |   2 +
 arch/arm/mach-w90x900/clock.c   |   6 ++
 arch/arm/mach-w90x900/time.c    | 151 +++++++++++++++++++++++++++++++++-------
 arch/arm/mach-w90x900/w90p910.c |   2 +
 4 files changed, 137 insertions(+), 24 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index c3fed1ee730..8c4f03d3412 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -495,6 +495,8 @@ config ARCH_W90X900
 	select GENERIC_GPIO
 	select HAVE_CLK
 	select COMMON_CLKDEV
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
 	help
 		Support for Nuvoton (Winbond logic dept.) ARM9 processor,You
 		can login www.mcuos.com or www.nuvoton.com to know more.
diff --git a/arch/arm/mach-w90x900/clock.c b/arch/arm/mach-w90x900/clock.c
index 49cf1fbc14e..70b67109637 100644
--- a/arch/arm/mach-w90x900/clock.c
+++ b/arch/arm/mach-w90x900/clock.c
@@ -55,6 +55,12 @@ void clk_disable(struct clk *clk)
 }
 EXPORT_SYMBOL(clk_disable);
 
+unsigned long clk_get_rate(struct clk *clk)
+{
+	return 15000000;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
 void w90x900_clk_enable(struct clk *clk, int enable)
 {
 	unsigned int clocks = clk->cken;
diff --git a/arch/arm/mach-w90x900/time.c b/arch/arm/mach-w90x900/time.c
index bcc838f6b39..5e06770e601 100644
--- a/arch/arm/mach-w90x900/time.c
+++ b/arch/arm/mach-w90x900/time.c
@@ -3,7 +3,7 @@
  *
  * Based on linux/arch/arm/plat-s3c24xx/time.c by Ben Dooks
  *
- * Copyright (c) 2008 Nuvoton technology corporation
+ * Copyright (c) 2009 Nuvoton technology corporation
  * All rights reserved.
  *
  * Wan ZongShun <mcuos.com@gmail.com>
@@ -23,6 +23,8 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/leds.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/irq.h>
@@ -31,49 +33,150 @@
 #include <mach/map.h>
 #include <mach/regs-timer.h>
 
-static unsigned long w90x900_gettimeoffset(void)
+#define RESETINT	0x1f
+#define PERIOD		(0x01 << 27)
+#define ONESHOT		(0x00 << 27)
+#define COUNTEN		(0x01 << 30)
+#define INTEN		(0x01 << 29)
+
+#define TICKS_PER_SEC	100
+#define PRESCALE	0x63 /* Divider = prescale + 1 */
+
+unsigned int timer0_load;
+
+static void w90p910_clockevent_setmode(enum clock_event_mode mode,
+		struct clock_event_device *clk)
 {
+	unsigned int val;
+
+	val = __raw_readl(REG_TCSR0);
+	val &= ~(0x03 << 27);
+
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		__raw_writel(timer0_load, REG_TICR0);
+		val |= (PERIOD | COUNTEN | INTEN | PRESCALE);
+		break;
+
+	case CLOCK_EVT_MODE_ONESHOT:
+		val |= (ONESHOT | COUNTEN | INTEN | PRESCALE);
+		break;
+
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_SHUTDOWN:
+	case CLOCK_EVT_MODE_RESUME:
+		break;
+	}
+
+	__raw_writel(val, REG_TCSR0);
+}
+
+static int w90p910_clockevent_setnextevent(unsigned long evt,
+		struct clock_event_device *clk)
+{
+	unsigned int val;
+
+	__raw_writel(evt, REG_TICR0);
+
+	val = __raw_readl(REG_TCSR0);
+	val |= (COUNTEN | INTEN | PRESCALE);
+	__raw_writel(val, REG_TCSR0);
+
 	return 0;
 }
 
+static struct clock_event_device w90p910_clockevent_device = {
+	.name		= "w90p910-timer0",
+	.shift		= 32,
+	.features	= CLOCK_EVT_MODE_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+	.set_mode	= w90p910_clockevent_setmode,
+	.set_next_event	= w90p910_clockevent_setnextevent,
+	.rating		= 300,
+};
+
 /*IRQ handler for the timer*/
 
-static irqreturn_t
-w90x900_timer_interrupt(int irq, void *dev_id)
+static irqreturn_t w90p910_timer0_interrupt(int irq, void *dev_id)
 {
-	timer_tick();
+	struct clock_event_device *evt = &w90p910_clockevent_device;
+
 	__raw_writel(0x01, REG_TISR); /* clear TIF0 */
+
+	evt->event_handler(evt);
 	return IRQ_HANDLED;
 }
 
-static struct irqaction w90x900_timer_irq = {
-	.name		= "w90x900 Timer Tick",
+static struct irqaction w90p910_timer0_irq = {
+	.name		= "w90p910-timer0",
 	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= w90x900_timer_interrupt,
+	.handler	= w90p910_timer0_interrupt,
 };
 
-/*Set up timer reg.*/
+static void __init w90p910_clockevents_init(unsigned int rate)
+{
+	w90p910_clockevent_device.mult = div_sc(rate, NSEC_PER_SEC,
+					w90p910_clockevent_device.shift);
+	w90p910_clockevent_device.max_delta_ns = clockevent_delta2ns(0xffffffff,
+					&w90p910_clockevent_device);
+	w90p910_clockevent_device.min_delta_ns = clockevent_delta2ns(0xf,
+					&w90p910_clockevent_device);
+	w90p910_clockevent_device.cpumask = cpumask_of(0);
 
-static void w90x900_timer_setup(void)
+	clockevents_register_device(&w90p910_clockevent_device);
+}
+
+static cycle_t w90p910_get_cycles(struct clocksource *cs)
 {
-	__raw_writel(0, REG_TCSR0);
-	__raw_writel(0, REG_TCSR1);
-	__raw_writel(0, REG_TCSR2);
-	__raw_writel(0, REG_TCSR3);
-	__raw_writel(0, REG_TCSR4);
-	__raw_writel(0x1F, REG_TISR);
-	__raw_writel(15000000/(100 * 100), REG_TICR0);
-	__raw_writel(0x68000063, REG_TCSR0);
+	return ~__raw_readl(REG_TDR1);
 }
 
-static void __init w90x900_timer_init(void)
+static struct clocksource clocksource_w90p910 = {
+	.name	= "w90p910-timer1",
+	.rating	= 200,
+	.read	= w90p910_get_cycles,
+	.mask	= CLOCKSOURCE_MASK(32),
+	.shift	= 20,
+	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static void __init w90p910_clocksource_init(unsigned int rate)
 {
-	w90x900_timer_setup();
-	setup_irq(IRQ_TIMER0, &w90x900_timer_irq);
+	unsigned int val;
+
+	__raw_writel(0xffffffff, REG_TICR1);
+
+	val = __raw_readl(REG_TCSR1);
+	val |= (COUNTEN | PERIOD);
+	__raw_writel(val, REG_TCSR1);
+
+	clocksource_w90p910.mult =
+		clocksource_khz2mult((rate / 1000), clocksource_w90p910.shift);
+	clocksource_register(&clocksource_w90p910);
+}
+
+static void __init w90p910_timer_init(void)
+{
+	struct clk *ck_ext = clk_get(NULL, "ext");
+	unsigned int	rate;
+
+	BUG_ON(IS_ERR(ck_ext));
+
+	rate = clk_get_rate(ck_ext);
+	clk_put(ck_ext);
+	rate = rate / (PRESCALE + 0x01);
+
+	 /* set a known state */
+	__raw_writel(0x00, REG_TCSR0);
+	__raw_writel(0x00, REG_TCSR1);
+	__raw_writel(RESETINT, REG_TISR);
+	timer0_load = (rate / TICKS_PER_SEC);
+
+	setup_irq(IRQ_TIMER0, &w90p910_timer0_irq);
+
+	w90p910_clocksource_init(rate);
+	w90p910_clockevents_init(rate);
 }
 
 struct sys_timer w90x900_timer = {
-	.init		= w90x900_timer_init,
-	.offset		= w90x900_gettimeoffset,
-	.resume		= w90x900_timer_setup
+	.init		= w90p910_timer_init,
 };
diff --git a/arch/arm/mach-w90x900/w90p910.c b/arch/arm/mach-w90x900/w90p910.c
index 8444eababaa..d33723b69d1 100644
--- a/arch/arm/mach-w90x900/w90p910.c
+++ b/arch/arm/mach-w90x900/w90p910.c
@@ -76,6 +76,7 @@ static DEFINE_CLK(wdt, 26);
 static DEFINE_CLK(gdma, 27);
 static DEFINE_CLK(adc, 28);
 static DEFINE_CLK(usi, 29);
+static DEFINE_CLK(ext, 0);
 
 static struct clk_lookup w90p910_clkregs[] = {
 	DEF_CLKLOOK(&clk_lcd, "w90p910-lcd", NULL),
@@ -97,6 +98,7 @@ static struct clk_lookup w90p910_clkregs[] = {
 	DEF_CLKLOOK(&clk_gdma, "w90p910-gdma", NULL),
 	DEF_CLKLOOK(&clk_adc, "w90p910-adc", NULL),
 	DEF_CLKLOOK(&clk_usi, "w90p910-spi", NULL),
+	DEF_CLKLOOK(&clk_ext, NULL, "ext"),
 };
 
 /* Initial serial platform data */
-- 
cgit v1.2.3


From f346becf2fdba4d9dc023d28bc9a28f74dc9e4ac Mon Sep 17 00:00:00 2001
From: wanzongshun <mcuos.com@gmail.com>
Date: Fri, 14 Aug 2009 15:37:42 +0100
Subject: ARM: 5675/1: The semaphore is used as mutex so make it a mutex
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

The semaphore is used as mutex so make it a mutex.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-w90x900/mfp-w90p910.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-w90x900/mfp-w90p910.c b/arch/arm/mach-w90x900/mfp-w90p910.c
index e11a32b6856..4533098a0ee 100644
--- a/arch/arm/mach-w90x900/mfp-w90p910.c
+++ b/arch/arm/mach-w90x900/mfp-w90p910.c
@@ -40,7 +40,7 @@
 #define ENI2C0		(0x01 << 14)
 #define ENI2C1		(0x01 << 16)
 
-static DECLARE_MUTEX(mfp_sem);
+static DEFINE_MUTEX(mfp_mutex);
 
 void mfp_set_groupf(struct device *dev)
 {
@@ -49,7 +49,7 @@ void mfp_set_groupf(struct device *dev)
 
 	BUG_ON(!dev);
 
-	down(&mfp_sem);
+	mutex_lock(&mfp_mutex);
 
 	dev_id = dev_name(dev);
 
@@ -62,7 +62,7 @@ void mfp_set_groupf(struct device *dev)
 
 	__raw_writel(mfpen, REG_MFSEL);
 
-	up(&mfp_sem);
+	mutex_unlock(&mfp_mutex);
 }
 EXPORT_SYMBOL(mfp_set_groupf);
 
@@ -73,7 +73,7 @@ void mfp_set_groupc(struct device *dev)
 
 	BUG_ON(!dev);
 
-	down(&mfp_sem);
+	mutex_lock(&mfp_mutex);
 
 	dev_id = dev_name(dev);
 
@@ -92,7 +92,7 @@ void mfp_set_groupc(struct device *dev)
 
 	__raw_writel(mfpen, REG_MFSEL);
 
-	up(&mfp_sem);
+	mutex_unlock(&mfp_mutex);
 }
 EXPORT_SYMBOL(mfp_set_groupc);
 
@@ -103,7 +103,7 @@ void mfp_set_groupi(struct device *dev)
 
 	BUG_ON(!dev);
 
-	down(&mfp_sem);
+	mutex_lock(&mfp_mutex);
 
 	dev_id = dev_name(dev);
 
@@ -120,7 +120,7 @@ void mfp_set_groupi(struct device *dev)
 
 	__raw_writel(mfpen, REG_MFSEL);
 
-	up(&mfp_sem);
+	mutex_unlock(&mfp_mutex);
 }
 EXPORT_SYMBOL(mfp_set_groupi);
 
@@ -131,7 +131,7 @@ void mfp_set_groupg(struct device *dev)
 
 	BUG_ON(!dev);
 
-	down(&mfp_sem);
+	mutex_lock(&mfp_mutex);
 
 	dev_id = dev_name(dev);
 
@@ -152,7 +152,7 @@ void mfp_set_groupg(struct device *dev)
 
 	__raw_writel(mfpen, REG_MFSEL);
 
-	up(&mfp_sem);
+	mutex_unlock(&mfp_mutex);
 }
 EXPORT_SYMBOL(mfp_set_groupg);
 
-- 
cgit v1.2.3


From a8bc4eadd936bbad9e99b89fe692679451ad75c9 Mon Sep 17 00:00:00 2001
From: wanzongshun <mcuos.com@gmail.com>
Date: Fri, 14 Aug 2009 15:38:29 +0100
Subject: ARM: 5676/1: Provide more useful introduction for w90x900

Provide more useful introduction for w90x900

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/Kconfig | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 8c4f03d3412..aad0add99a5 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -498,8 +498,13 @@ config ARCH_W90X900
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	help
-		Support for Nuvoton (Winbond logic dept.) ARM9 processor,You
-		can login www.mcuos.com or www.nuvoton.com to know more.
+	  Support for Nuvoton (Winbond logic dept.) ARM9 processor,
+	  At present, the w90x900 has been renamed nuc900, regarding
+	  the ARM series product line, you can login the following
+	  link address to know more.
+
+	  <http://www.nuvoton.com/hq/enu/ProductAndSales/ProductLines/
+		ConsumerElectronicsIC/ARMMicrocontroller/ARMMicrocontroller>
 
 config ARCH_PNX4008
 	bool "Philips Nexperia PNX4008 Mobile"
-- 
cgit v1.2.3


From 4663712cc745324a216112a72c744bb2b8f6658b Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Fri, 7 Aug 2009 19:56:19 +0100
Subject: ARM: 5643/1: bcmring: arch.c and header files

add arch.c in mach-bcmring
add related header files in mach-bcmring

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-bcmring/arch.c                       | 157 +++++++++++++++++++++
 arch/arm/mach-bcmring/core.h                       |  30 ++++
 arch/arm/mach-bcmring/include/cfg_global.h         |  13 ++
 arch/arm/mach-bcmring/include/cfg_global_defines.h |  40 ++++++
 arch/arm/mach-bcmring/include/mach/hardware.h      |  60 ++++++++
 arch/arm/mach-bcmring/include/mach/system.h        |  54 +++++++
 6 files changed, 354 insertions(+)
 create mode 100644 arch/arm/mach-bcmring/arch.c
 create mode 100644 arch/arm/mach-bcmring/core.h
 create mode 100644 arch/arm/mach-bcmring/include/cfg_global.h
 create mode 100644 arch/arm/mach-bcmring/include/cfg_global_defines.h
 create mode 100644 arch/arm/mach-bcmring/include/mach/hardware.h
 create mode 100644 arch/arm/mach-bcmring/include/mach/system.h

(limited to 'arch')

diff --git a/arch/arm/mach-bcmring/arch.c b/arch/arm/mach-bcmring/arch.c
new file mode 100644
index 00000000000..0da693b0f7e
--- /dev/null
+++ b/arch/arm/mach-bcmring/arch.c
@@ -0,0 +1,157 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/spinlock.h>
+#include <linux/module.h>
+
+#include <linux/proc_fs.h>
+#include <linux/sysctl.h>
+
+#include <asm/irq.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/time.h>
+
+#include <asm/mach/arch.h>
+#include <mach/dma.h>
+#include <mach/hardware.h>
+#include <mach/csp/mm_io.h>
+#include <mach/csp/chipcHw_def.h>
+#include <mach/csp/chipcHw_inline.h>
+
+#include <cfg_global.h>
+
+#include "core.h"
+
+HW_DECLARE_SPINLOCK(arch)
+HW_DECLARE_SPINLOCK(gpio)
+#if defined(CONFIG_DEBUG_SPINLOCK)
+    EXPORT_SYMBOL(bcmring_gpio_reg_lock);
+#endif
+
+/* FIXME: temporary solution */
+#define BCM_SYSCTL_REBOOT_WARM               1
+#define CTL_BCM_REBOOT                 112
+
+/* sysctl */
+int bcmring_arch_warm_reboot;	/* do a warm reboot on hard reset */
+
+static struct ctl_table_header *bcmring_sysctl_header;
+
+static struct ctl_table bcmring_sysctl_warm_reboot[] = {
+	{
+	 .ctl_name = BCM_SYSCTL_REBOOT_WARM,
+	 .procname = "warm",
+	 .data = &bcmring_arch_warm_reboot,
+	 .maxlen = sizeof(int),
+	 .mode = 0644,
+	 .proc_handler = &proc_dointvec},
+	{}
+};
+
+static struct ctl_table bcmring_sysctl_reboot[] = {
+	{
+	 .ctl_name = CTL_BCM_REBOOT,
+	 .procname = "reboot",
+	 .mode = 0555,
+	 .child = bcmring_sysctl_warm_reboot},
+	{}
+};
+
+static struct platform_device nand_device = {
+	.name = "bcm-nand",
+	.id = -1,
+};
+
+static struct platform_device *devices[] __initdata = {
+	&nand_device,
+};
+
+/****************************************************************************
+*
+*   Called from the customize_machine function in arch/arm/kernel/setup.c
+*
+*   The customize_machine function is tagged as an arch_initcall
+*   (see include/linux/init.h for the order that the various init sections
+*   are called in.
+*
+*****************************************************************************/
+static void __init bcmring_init_machine(void)
+{
+
+	bcmring_sysctl_header = register_sysctl_table(bcmring_sysctl_reboot);
+
+	/* Enable spread spectrum */
+	chipcHw_enableSpreadSpectrum();
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	bcmring_amba_init();
+
+	dma_init();
+}
+
+/****************************************************************************
+*
+*   Called from setup_arch (in arch/arm/kernel/setup.c) to fixup any tags
+*   passed in by the boot loader.
+*
+*****************************************************************************/
+
+static void __init bcmring_fixup(struct machine_desc *desc,
+     struct tag *t, char **cmdline, struct meminfo *mi) {
+#ifdef CONFIG_BLK_DEV_INITRD
+	printk(KERN_NOTICE "bcmring_fixup\n");
+	t->hdr.tag = ATAG_CORE;
+	t->hdr.size = tag_size(tag_core);
+	t->u.core.flags = 0;
+	t->u.core.pagesize = PAGE_SIZE;
+	t->u.core.rootdev = 31 << 8 | 0;
+	t = tag_next(t);
+
+	t->hdr.tag = ATAG_MEM;
+	t->hdr.size = tag_size(tag_mem32);
+	t->u.mem.start = CFG_GLOBAL_RAM_BASE;
+	t->u.mem.size = CFG_GLOBAL_RAM_SIZE;
+
+	t = tag_next(t);
+
+	t->hdr.tag = ATAG_NONE;
+	t->hdr.size = 0;
+#endif
+}
+
+/****************************************************************************
+*
+*   Machine Description
+*
+*****************************************************************************/
+
+MACHINE_START(BCMRING, "BCMRING")
+	/* Maintainer: Broadcom Corporation */
+	.phys_io = MM_IO_START,
+	.io_pg_offst = (MM_IO_BASE >> 18) & 0xfffc,
+	.fixup = bcmring_fixup,
+	.map_io = bcmring_map_io,
+	.init_irq = bcmring_init_irq,
+	.timer = &bcmring_timer,
+	.init_machine = bcmring_init_machine
+MACHINE_END
diff --git a/arch/arm/mach-bcmring/core.h b/arch/arm/mach-bcmring/core.h
new file mode 100644
index 00000000000..b197ba48e36
--- /dev/null
+++ b/arch/arm/mach-bcmring/core.h
@@ -0,0 +1,30 @@
+/*
+ *  linux/arch/arm/mach-versatile/core.h
+ *
+ *  Copyright (C) 2004 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+/* Portions copyright Broadcom 2008 */
+#ifndef __ASM_ARCH_BCMRING_H
+#define __ASM_ARCH_BCMRING_H
+
+void __init bcmring_amba_init(void);
+void __init bcmring_map_io(void);
+void __init bcmring_init_irq(void);
+
+extern struct sys_timer bcmring_timer;
+#endif
diff --git a/arch/arm/mach-bcmring/include/cfg_global.h b/arch/arm/mach-bcmring/include/cfg_global.h
new file mode 100644
index 00000000000..f01da877148
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/cfg_global.h
@@ -0,0 +1,13 @@
+#ifndef _CFG_GLOBAL_H_
+#define _CFG_GLOBAL_H_
+
+#include <cfg_global_defines.h>
+
+#define CFG_GLOBAL_CHIP                         BCM11107
+#define CFG_GLOBAL_CHIP_FAMILY                  CFG_GLOBAL_CHIP_FAMILY_BCMRING
+#define CFG_GLOBAL_CHIP_REV                     0xB0
+#define CFG_GLOBAL_RAM_SIZE                     0x10000000
+#define CFG_GLOBAL_RAM_BASE                     0x00000000
+#define CFG_GLOBAL_RAM_RESERVED_SIZE            0x000000
+
+#endif /* _CFG_GLOBAL_H_ */
diff --git a/arch/arm/mach-bcmring/include/cfg_global_defines.h b/arch/arm/mach-bcmring/include/cfg_global_defines.h
new file mode 100644
index 00000000000..b5beb0b3073
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/cfg_global_defines.h
@@ -0,0 +1,40 @@
+/*****************************************************************************
+* Copyright 2006 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef CFG_GLOBAL_DEFINES_H
+#define CFG_GLOBAL_DEFINES_H
+
+/* CHIP */
+#define BCM1103 1
+
+#define BCM1191 4
+#define BCM2153 5
+#define BCM2820 6
+
+#define BCM2826 8
+#define FPGA11107 9
+#define BCM11107   10
+#define BCM11109   11
+#define BCM11170   12
+#define BCM11110   13
+#define BCM11211   14
+
+/* CFG_GLOBAL_CHIP_FAMILY types */
+#define CFG_GLOBAL_CHIP_FAMILY_NONE        0
+#define CFG_GLOBAL_CHIP_FAMILY_BCM116X     2
+#define CFG_GLOBAL_CHIP_FAMILY_BCMRING     4
+#define CFG_GLOBAL_CHIP_FAMILY_BCM1103     8
+
+#define IMAGE_HEADER_SIZE_CHECKSUM    4
+#endif
diff --git a/arch/arm/mach-bcmring/include/mach/hardware.h b/arch/arm/mach-bcmring/include/mach/hardware.h
new file mode 100644
index 00000000000..447eb340c61
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/hardware.h
@@ -0,0 +1,60 @@
+/*
+ *
+ *  This file contains the hardware definitions of the BCMRing.
+ *
+ *  Copyright (C) 1999 ARM Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>
+#include <mach/memory.h>
+#include <cfg_global.h>
+#include <mach/csp/mm_io.h>
+
+/* Hardware addresses of major areas.
+ *  *_START is the physical address
+ *  *_SIZE  is the size of the region
+ *  *_BASE  is the virtual address
+ */
+#define RAM_START               PHYS_OFFSET
+
+#define RAM_SIZE                (CFG_GLOBAL_RAM_SIZE-CFG_GLOBAL_RAM_SIZE_RESERVED)
+#define RAM_BASE                PAGE_OFFSET
+
+#define pcibios_assign_all_busses()	1
+
+/* Macros to make managing spinlocks a bit more controlled in terms of naming. */
+/* See reg_gpio.h, reg_irq.h, arch.c, gpio.c for example usage. */
+#if defined(__KERNEL__)
+#define HW_DECLARE_SPINLOCK(name)  DEFINE_SPINLOCK(bcmring_##name##_reg_lock);
+#define HW_EXTERN_SPINLOCK(name)   extern spinlock_t bcmring_##name##_reg_lock;
+#define HW_IRQ_SAVE(name, val)     spin_lock_irqsave(&bcmring_##name##_reg_lock, (val))
+#define HW_IRQ_RESTORE(name, val)  spin_unlock_irqrestore(&bcmring_##name##_reg_lock, (val))
+#else
+#define HW_DECLARE_SPINLOCK(name)
+#define HW_EXTERN_SPINLOCK(name)
+#define HW_IRQ_SAVE(name, val)     {(void)(name); (void)(val); }
+#define HW_IRQ_RESTORE(name, val)  {(void)(name); (void)(val); }
+#endif
+
+#ifndef HW_IO_PHYS_TO_VIRT
+#define HW_IO_PHYS_TO_VIRT MM_IO_PHYS_TO_VIRT
+#endif
+#define HW_IO_VIRT_TO_PHYS MM_IO_VIRT_TO_PHYS
+
+#endif
diff --git a/arch/arm/mach-bcmring/include/mach/system.h b/arch/arm/mach-bcmring/include/mach/system.h
new file mode 100644
index 00000000000..cdbf93c694a
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/system.h
@@ -0,0 +1,54 @@
+/*
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <mach/csp/chipcHw_inline.h>
+
+extern int bcmring_arch_warm_reboot;
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode, char *cmd)
+{
+	printk("arch_reset:%c %x\n", mode, bcmring_arch_warm_reboot);
+
+	if (mode == 'h') {
+		/* Reboot configured in proc entry */
+		if (bcmring_arch_warm_reboot) {
+			printk("warm reset\n");
+			/* Issue Warm reset (do not reset ethernet switch, keep alive) */
+			chipcHw_reset(chipcHw_REG_SOFT_RESET_CHIP_WARM);
+		} else {
+			/* Force reset of everything */
+			printk("force reset\n");
+			chipcHw_reset(chipcHw_REG_SOFT_RESET_CHIP_SOFT);
+		}
+	} else {
+		/* Force reset of everything */
+		printk("force reset\n");
+		chipcHw_reset(chipcHw_REG_SOFT_RESET_CHIP_SOFT);
+	}
+}
+
+#endif
-- 
cgit v1.2.3


From 278a6752e869b0f4a03ce5ac0588b31b50712903 Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Fri, 7 Aug 2009 19:58:26 +0100
Subject: ARM: 5644/1: add bcmring core.c, clock.c, clock.h

add core.c, clock.c, and clock.h in mach-bcmring

implement timer init, clocksource init, amba device init
implement clock set/get enable/disable API
add dummy clkdev.h

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-bcmring/clock.c               | 224 +++++++++++++++++
 arch/arm/mach-bcmring/clock.h               |  33 +++
 arch/arm/mach-bcmring/core.c                | 367 ++++++++++++++++++++++++++++
 arch/arm/mach-bcmring/include/mach/clkdev.h |   7 +
 4 files changed, 631 insertions(+)
 create mode 100644 arch/arm/mach-bcmring/clock.c
 create mode 100644 arch/arm/mach-bcmring/clock.h
 create mode 100644 arch/arm/mach-bcmring/core.c
 create mode 100644 arch/arm/mach-bcmring/include/mach/clkdev.h

(limited to 'arch')

diff --git a/arch/arm/mach-bcmring/clock.c b/arch/arm/mach-bcmring/clock.c
new file mode 100644
index 00000000000..14bafc38f2d
--- /dev/null
+++ b/arch/arm/mach-bcmring/clock.c
@@ -0,0 +1,224 @@
+/*****************************************************************************
+* Copyright 2001 - 2009 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/clk.h>
+#include <linux/spinlock.h>
+#include <mach/csp/hw_cfg.h>
+#include <mach/csp/chipcHw_def.h>
+#include <mach/csp/chipcHw_reg.h>
+#include <mach/csp/chipcHw_inline.h>
+
+#include <asm/clkdev.h>
+
+#include "clock.h"
+
+#define clk_is_primary(x)       ((x)->type & CLK_TYPE_PRIMARY)
+#define clk_is_pll1(x)          ((x)->type & CLK_TYPE_PLL1)
+#define clk_is_pll2(x)          ((x)->type & CLK_TYPE_PLL2)
+#define clk_is_programmable(x)  ((x)->type & CLK_TYPE_PROGRAMMABLE)
+#define clk_is_bypassable(x)    ((x)->type & CLK_TYPE_BYPASSABLE)
+
+#define clk_is_using_xtal(x)    ((x)->mode & CLK_MODE_XTAL)
+
+static DEFINE_SPINLOCK(clk_lock);
+
+static void __clk_enable(struct clk *clk)
+{
+	if (!clk)
+		return;
+
+	/* enable parent clock first */
+	if (clk->parent)
+		__clk_enable(clk->parent);
+
+	if (clk->use_cnt++ == 0) {
+		if (clk_is_pll1(clk)) {	/* PLL1 */
+			chipcHw_pll1Enable(clk->rate_hz, 0);
+		} else if (clk_is_pll2(clk)) {	/* PLL2 */
+			chipcHw_pll2Enable(clk->rate_hz);
+		} else if (clk_is_using_xtal(clk)) {	/* source is crystal */
+			if (!clk_is_primary(clk))
+				chipcHw_bypassClockEnable(clk->csp_id);
+		} else {	/* source is PLL */
+			chipcHw_setClockEnable(clk->csp_id);
+		}
+	}
+}
+
+int clk_enable(struct clk *clk)
+{
+	unsigned long flags;
+
+	if (!clk)
+		return -EINVAL;
+
+	spin_lock_irqsave(&clk_lock, flags);
+	__clk_enable(clk);
+	spin_unlock_irqrestore(&clk_lock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+static void __clk_disable(struct clk *clk)
+{
+	if (!clk)
+		return;
+
+	BUG_ON(clk->use_cnt == 0);
+
+	if (--clk->use_cnt == 0) {
+		if (clk_is_pll1(clk)) {	/* PLL1 */
+			chipcHw_pll1Disable();
+		} else if (clk_is_pll2(clk)) {	/* PLL2 */
+			chipcHw_pll2Disable();
+		} else if (clk_is_using_xtal(clk)) {	/* source is crystal */
+			if (!clk_is_primary(clk))
+				chipcHw_bypassClockDisable(clk->csp_id);
+		} else {	/* source is PLL */
+			chipcHw_setClockDisable(clk->csp_id);
+		}
+	}
+
+	if (clk->parent)
+		__clk_disable(clk->parent);
+}
+
+void clk_disable(struct clk *clk)
+{
+	unsigned long flags;
+
+	if (!clk)
+		return;
+
+	spin_lock_irqsave(&clk_lock, flags);
+	__clk_disable(clk);
+	spin_unlock_irqrestore(&clk_lock, flags);
+}
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+	if (!clk)
+		return 0;
+
+	return clk->rate_hz;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned long flags;
+	unsigned long actual;
+	unsigned long rate_hz;
+
+	if (!clk)
+		return -EINVAL;
+
+	if (!clk_is_programmable(clk))
+		return -EINVAL;
+
+	if (clk->use_cnt)
+		return -EBUSY;
+
+	spin_lock_irqsave(&clk_lock, flags);
+	actual = clk->parent->rate_hz;
+	rate_hz = min(actual, rate);
+	spin_unlock_irqrestore(&clk_lock, flags);
+
+	return rate_hz;
+}
+EXPORT_SYMBOL(clk_round_rate);
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned long flags;
+	unsigned long actual;
+	unsigned long rate_hz;
+
+	if (!clk)
+		return -EINVAL;
+
+	if (!clk_is_programmable(clk))
+		return -EINVAL;
+
+	if (clk->use_cnt)
+		return -EBUSY;
+
+	spin_lock_irqsave(&clk_lock, flags);
+	actual = clk->parent->rate_hz;
+	rate_hz = min(actual, rate);
+	rate_hz = chipcHw_setClockFrequency(clk->csp_id, rate_hz);
+	clk->rate_hz = rate_hz;
+	spin_unlock_irqrestore(&clk_lock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
+struct clk *clk_get_parent(struct clk *clk)
+{
+	if (!clk)
+		return NULL;
+
+	return clk->parent;
+}
+EXPORT_SYMBOL(clk_get_parent);
+
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+	unsigned long flags;
+	struct clk *old_parent;
+
+	if (!clk || !parent)
+		return -EINVAL;
+
+	if (!clk_is_primary(parent) || !clk_is_bypassable(clk))
+		return -EINVAL;
+
+	/* if more than one user, parent is not allowed */
+	if (clk->use_cnt > 1)
+		return -EBUSY;
+
+	if (clk->parent == parent)
+		return 0;
+
+	spin_lock_irqsave(&clk_lock, flags);
+	old_parent = clk->parent;
+	clk->parent = parent;
+	if (clk_is_using_xtal(parent))
+		clk->mode |= CLK_MODE_XTAL;
+	else
+		clk->mode &= (~CLK_MODE_XTAL);
+
+	/* if clock is active */
+	if (clk->use_cnt != 0) {
+		clk->use_cnt--;
+		/* enable clock with the new parent */
+		__clk_enable(clk);
+		/* disable the old parent */
+		__clk_disable(old_parent);
+	}
+	spin_unlock_irqrestore(&clk_lock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL(clk_set_parent);
diff --git a/arch/arm/mach-bcmring/clock.h b/arch/arm/mach-bcmring/clock.h
new file mode 100644
index 00000000000..5e0b9813897
--- /dev/null
+++ b/arch/arm/mach-bcmring/clock.h
@@ -0,0 +1,33 @@
+/*****************************************************************************
+* Copyright 2001 - 2009 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+#include <mach/csp/chipcHw_def.h>
+
+#define CLK_TYPE_PRIMARY         1	/* primary clock must NOT have a parent */
+#define CLK_TYPE_PLL1            2	/* PPL1 */
+#define CLK_TYPE_PLL2            4	/* PPL2 */
+#define CLK_TYPE_PROGRAMMABLE    8	/* programmable clock rate */
+#define CLK_TYPE_BYPASSABLE      16	/* parent can be changed */
+
+#define CLK_MODE_XTAL            1	/* clock source is from crystal */
+
+struct clk {
+	const char *name;	/* clock name */
+	unsigned int type;	/* clock type */
+	unsigned int mode;	/* current mode */
+	volatile int use_bypass;	/* indicate if it's in bypass mode */
+	chipcHw_CLOCK_e csp_id;	/* clock ID for CSP CHIPC */
+	unsigned long rate_hz;	/* clock rate in Hz */
+	unsigned int use_cnt;	/* usage count */
+	struct clk *parent;	/* parent clock */
+};
diff --git a/arch/arm/mach-bcmring/core.c b/arch/arm/mach-bcmring/core.c
new file mode 100644
index 00000000000..492c649f451
--- /dev/null
+++ b/arch/arm/mach-bcmring/core.c
@@ -0,0 +1,367 @@
+/*
+ *  derived from linux/arch/arm/mach-versatile/core.c
+ *  linux/arch/arm/mach-bcmring/core.c
+ *
+ *  Copyright (C) 1999 - 2003 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+/* Portions copyright Broadcom 2008 */
+
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/interrupt.h>
+#include <linux/amba/bus.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+
+#include <linux/amba/bus.h>
+#include <mach/csp/mm_addr.h>
+#include <mach/hardware.h>
+#include <asm/clkdev.h>
+#include <linux/io.h>
+#include <asm/irq.h>
+#include <asm/hardware/arm_timer.h>
+#include <asm/mach-types.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <asm/mach/mmc.h>
+
+#include <cfg_global.h>
+
+#include "clock.h"
+
+#include <csp/secHw.h>
+#include <mach/csp/secHw_def.h>
+#include <mach/csp/chipcHw_inline.h>
+#include <mach/csp/tmrHw_reg.h>
+
+#define AMBA_DEVICE(name, initname, base, plat, size)       \
+static struct amba_device name##_device = {     \
+   .dev = {                                     \
+      .coherent_dma_mask = ~0,                  \
+      .init_name = initname,                    \
+      .platform_data = plat                     \
+   },                                           \
+   .res = {                                     \
+      .start = MM_ADDR_IO_##base,               \
+		.end = MM_ADDR_IO_##base + (size) - 1,    \
+      .flags = IORESOURCE_MEM                   \
+   },                                           \
+   .dma_mask = ~0,                              \
+   .irq = {                                     \
+      IRQ_##base                                \
+   }                                            \
+}
+
+
+AMBA_DEVICE(uartA, "uarta", UARTA, NULL, SZ_4K);
+AMBA_DEVICE(uartB, "uartb", UARTB, NULL, SZ_4K);
+
+static struct clk pll1_clk = {
+	.name = "PLL1",
+	.type = CLK_TYPE_PRIMARY | CLK_TYPE_PLL1,
+	.rate_hz = 2000000000,
+	.use_cnt = 7,
+};
+
+static struct clk uart_clk = {
+	.name = "UART",
+	.type = CLK_TYPE_PROGRAMMABLE,
+	.csp_id = chipcHw_CLOCK_UART,
+	.rate_hz = HW_CFG_UART_CLK_HZ,
+	.parent = &pll1_clk,
+};
+
+static struct clk_lookup lookups[] = {
+	{			/* UART0 */
+	 .dev_id = "uarta",
+	 .clk = &uart_clk,
+	 }, {			/* UART1 */
+	     .dev_id = "uartb",
+	     .clk = &uart_clk,
+	     }
+};
+
+static struct amba_device *amba_devs[] __initdata = {
+	&uartA_device,
+	&uartB_device,
+};
+
+void __init bcmring_amba_init(void)
+{
+	int i;
+	u32 bus_clock;
+
+/* Linux is run initially in non-secure mode. Secure peripherals */
+/* generate FIQ, and must be handled in secure mode. Until we have */
+/* a linux security monitor implementation, keep everything in */
+/* non-secure mode. */
+	chipcHw_busInterfaceClockEnable(chipcHw_REG_BUS_CLOCK_SPU);
+	secHw_setUnsecure(secHw_BLK_MASK_CHIP_CONTROL |
+			  secHw_BLK_MASK_KEY_SCAN |
+			  secHw_BLK_MASK_TOUCH_SCREEN |
+			  secHw_BLK_MASK_UART0 |
+			  secHw_BLK_MASK_UART1 |
+			  secHw_BLK_MASK_WATCHDOG |
+			  secHw_BLK_MASK_SPUM |
+			  secHw_BLK_MASK_DDR2 |
+			  secHw_BLK_MASK_SPU |
+			  secHw_BLK_MASK_PKA |
+			  secHw_BLK_MASK_RNG |
+			  secHw_BLK_MASK_RTC |
+			  secHw_BLK_MASK_OTP |
+			  secHw_BLK_MASK_BOOT |
+			  secHw_BLK_MASK_MPU |
+			  secHw_BLK_MASK_TZCTRL | secHw_BLK_MASK_INTR);
+
+	/* Only the devices attached to the AMBA bus are enabled just before the bus is */
+	/* scanned and the drivers are loaded. The clocks need to be on for the AMBA bus */
+	/* driver to access these blocks. The bus is probed, and the drivers are loaded. */
+	/* FIXME Need to remove enable of PIF once CLCD clock enable used properly in FPGA. */
+	bus_clock = chipcHw_REG_BUS_CLOCK_GE
+	    | chipcHw_REG_BUS_CLOCK_SDIO0 | chipcHw_REG_BUS_CLOCK_SDIO1;
+
+	chipcHw_busInterfaceClockEnable(bus_clock);
+
+	for (i = 0; i < ARRAY_SIZE(lookups); i++)
+		clkdev_add(&lookups[i]);
+
+	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
+		struct amba_device *d = amba_devs[i];
+		amba_device_register(d, &iomem_resource);
+	}
+}
+
+/*
+ * Where is the timer (VA)?
+ */
+#define TIMER0_VA_BASE		 MM_IO_BASE_TMR
+#define TIMER1_VA_BASE		(MM_IO_BASE_TMR + 0x20)
+#define TIMER2_VA_BASE		(MM_IO_BASE_TMR + 0x40)
+#define TIMER3_VA_BASE          (MM_IO_BASE_TMR + 0x60)
+
+/* Timer 0 - 25 MHz, Timer3 at bus clock rate, typically  150-166 MHz */
+#if defined(CONFIG_ARCH_FPGA11107)
+/* fpga cpu/bus are currently 30 times slower so scale frequency as well to */
+/* slow down Linux's sense of time */
+#define TIMER0_FREQUENCY_MHZ  (tmrHw_LOW_FREQUENCY_MHZ * 30)
+#define TIMER1_FREQUENCY_MHZ  (tmrHw_LOW_FREQUENCY_MHZ * 30)
+#define TIMER3_FREQUENCY_MHZ  (tmrHw_HIGH_FREQUENCY_MHZ * 30)
+#define TIMER3_FREQUENCY_KHZ   (tmrHw_HIGH_FREQUENCY_HZ / 1000 * 30)
+#else
+#define TIMER0_FREQUENCY_MHZ  tmrHw_LOW_FREQUENCY_MHZ
+#define TIMER1_FREQUENCY_MHZ  tmrHw_LOW_FREQUENCY_MHZ
+#define TIMER3_FREQUENCY_MHZ  tmrHw_HIGH_FREQUENCY_MHZ
+#define TIMER3_FREQUENCY_KHZ  (tmrHw_HIGH_FREQUENCY_HZ / 1000)
+#endif
+
+#define TICKS_PER_uSEC     TIMER0_FREQUENCY_MHZ
+
+/*
+ *  These are useconds NOT ticks.
+ *
+ */
+#define mSEC_1                          1000
+#define mSEC_5                          (mSEC_1 * 5)
+#define mSEC_10                         (mSEC_1 * 10)
+#define mSEC_25                         (mSEC_1 * 25)
+#define SEC_1                           (mSEC_1 * 1000)
+
+/*
+ * How long is the timer interval?
+ */
+#define TIMER_INTERVAL	(TICKS_PER_uSEC * mSEC_10)
+#if TIMER_INTERVAL >= 0x100000
+#define TIMER_RELOAD	(TIMER_INTERVAL >> 8)
+#define TIMER_DIVISOR	(TIMER_CTRL_DIV256)
+#define TICKS2USECS(x)	(256 * (x) / TICKS_PER_uSEC)
+#elif TIMER_INTERVAL >= 0x10000
+#define TIMER_RELOAD	(TIMER_INTERVAL >> 4)	/* Divide by 16 */
+#define TIMER_DIVISOR	(TIMER_CTRL_DIV16)
+#define TICKS2USECS(x)	(16 * (x) / TICKS_PER_uSEC)
+#else
+#define TIMER_RELOAD	(TIMER_INTERVAL)
+#define TIMER_DIVISOR	(TIMER_CTRL_DIV1)
+#define TICKS2USECS(x)	((x) / TICKS_PER_uSEC)
+#endif
+
+static void timer_set_mode(enum clock_event_mode mode,
+			   struct clock_event_device *clk)
+{
+	unsigned long ctrl;
+
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		writel(TIMER_RELOAD, TIMER0_VA_BASE + TIMER_LOAD);
+
+		ctrl = TIMER_CTRL_PERIODIC;
+		ctrl |=
+		    TIMER_DIVISOR | TIMER_CTRL_32BIT | TIMER_CTRL_IE |
+		    TIMER_CTRL_ENABLE;
+		break;
+	case CLOCK_EVT_MODE_ONESHOT:
+		/* period set, and timer enabled in 'next_event' hook */
+		ctrl = TIMER_CTRL_ONESHOT;
+		ctrl |= TIMER_DIVISOR | TIMER_CTRL_32BIT | TIMER_CTRL_IE;
+		break;
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_SHUTDOWN:
+	default:
+		ctrl = 0;
+	}
+
+	writel(ctrl, TIMER0_VA_BASE + TIMER_CTRL);
+}
+
+static int timer_set_next_event(unsigned long evt,
+				struct clock_event_device *unused)
+{
+	unsigned long ctrl = readl(TIMER0_VA_BASE + TIMER_CTRL);
+
+	writel(evt, TIMER0_VA_BASE + TIMER_LOAD);
+	writel(ctrl | TIMER_CTRL_ENABLE, TIMER0_VA_BASE + TIMER_CTRL);
+
+	return 0;
+}
+
+static struct clock_event_device timer0_clockevent = {
+	.name = "timer0",
+	.shift = 32,
+	.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+	.set_mode = timer_set_mode,
+	.set_next_event = timer_set_next_event,
+};
+
+/*
+ * IRQ handler for the timer
+ */
+static irqreturn_t bcmring_timer_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = &timer0_clockevent;
+
+	writel(1, TIMER0_VA_BASE + TIMER_INTCLR);
+
+	evt->event_handler(evt);
+
+	return IRQ_HANDLED;
+}
+
+static struct irqaction bcmring_timer_irq = {
+	.name = "bcmring Timer Tick",
+	.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.handler = bcmring_timer_interrupt,
+};
+
+static cycle_t bcmring_get_cycles_timer1(void)
+{
+	return ~readl(TIMER1_VA_BASE + TIMER_VALUE);
+}
+
+static cycle_t bcmring_get_cycles_timer3(void)
+{
+	return ~readl(TIMER3_VA_BASE + TIMER_VALUE);
+}
+
+static struct clocksource clocksource_bcmring_timer1 = {
+	.name = "timer1",
+	.rating = 200,
+	.read = bcmring_get_cycles_timer1,
+	.mask = CLOCKSOURCE_MASK(32),
+	.shift = 20,
+	.flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static struct clocksource clocksource_bcmring_timer3 = {
+	.name = "timer3",
+	.rating = 100,
+	.read = bcmring_get_cycles_timer3,
+	.mask = CLOCKSOURCE_MASK(32),
+	.shift = 20,
+	.flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static int __init bcmring_clocksource_init(void)
+{
+	/* setup timer1 as free-running clocksource */
+	writel(0, TIMER1_VA_BASE + TIMER_CTRL);
+	writel(0xffffffff, TIMER1_VA_BASE + TIMER_LOAD);
+	writel(0xffffffff, TIMER1_VA_BASE + TIMER_VALUE);
+	writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC,
+	       TIMER1_VA_BASE + TIMER_CTRL);
+
+	clocksource_bcmring_timer1.mult =
+	    clocksource_khz2mult(TIMER1_FREQUENCY_MHZ * 1000,
+				 clocksource_bcmring_timer1.shift);
+	clocksource_register(&clocksource_bcmring_timer1);
+
+	/* setup timer3 as free-running clocksource */
+	writel(0, TIMER3_VA_BASE + TIMER_CTRL);
+	writel(0xffffffff, TIMER3_VA_BASE + TIMER_LOAD);
+	writel(0xffffffff, TIMER3_VA_BASE + TIMER_VALUE);
+	writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC,
+	       TIMER3_VA_BASE + TIMER_CTRL);
+
+	clocksource_bcmring_timer3.mult =
+	    clocksource_khz2mult(TIMER3_FREQUENCY_KHZ,
+				 clocksource_bcmring_timer3.shift);
+	clocksource_register(&clocksource_bcmring_timer3);
+
+	return 0;
+}
+
+/*
+ * Set up timer interrupt, and return the current time in seconds.
+ */
+void __init bcmring_init_timer(void)
+{
+	printk(KERN_INFO "bcmring_init_timer\n");
+	/*
+	 * Initialise to a known state (all timers off)
+	 */
+	writel(0, TIMER0_VA_BASE + TIMER_CTRL);
+	writel(0, TIMER1_VA_BASE + TIMER_CTRL);
+	writel(0, TIMER2_VA_BASE + TIMER_CTRL);
+	writel(0, TIMER3_VA_BASE + TIMER_CTRL);
+
+	/*
+	 * Make irqs happen for the system timer
+	 */
+	setup_irq(IRQ_TIMER0, &bcmring_timer_irq);
+
+	bcmring_clocksource_init();
+
+	timer0_clockevent.mult =
+	    div_sc(1000000, NSEC_PER_SEC, timer0_clockevent.shift);
+	timer0_clockevent.max_delta_ns =
+	    clockevent_delta2ns(0xffffffff, &timer0_clockevent);
+	timer0_clockevent.min_delta_ns =
+	    clockevent_delta2ns(0xf, &timer0_clockevent);
+
+	timer0_clockevent.cpumask = cpumask_of(0);
+	clockevents_register_device(&timer0_clockevent);
+}
+
+struct sys_timer bcmring_timer = {
+	.init = bcmring_init_timer,
+};
diff --git a/arch/arm/mach-bcmring/include/mach/clkdev.h b/arch/arm/mach-bcmring/include/mach/clkdev.h
new file mode 100644
index 00000000000..04b37a89801
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/clkdev.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif
-- 
cgit v1.2.3


From b7462d654f623738b4b3e03cff20f68b5b9a77f5 Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Fri, 7 Aug 2009 19:59:04 +0100
Subject: ARM: 5645/1: bcmring: add bcmring irq.c

init irq and handler
add irq controller register file and header files

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-bcmring/include/csp/intcHw.h         |  40 ++++
 .../arm/mach-bcmring/include/mach/csp/intcHw_reg.h | 246 +++++++++++++++++++++
 arch/arm/mach-bcmring/include/mach/irqs.h          | 132 +++++++++++
 arch/arm/mach-bcmring/irq.c                        | 127 +++++++++++
 4 files changed, 545 insertions(+)
 create mode 100644 arch/arm/mach-bcmring/include/csp/intcHw.h
 create mode 100644 arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h
 create mode 100644 arch/arm/mach-bcmring/include/mach/irqs.h
 create mode 100644 arch/arm/mach-bcmring/irq.c

(limited to 'arch')

diff --git a/arch/arm/mach-bcmring/include/csp/intcHw.h b/arch/arm/mach-bcmring/include/csp/intcHw.h
new file mode 100644
index 00000000000..1c639c8ee08
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/intcHw.h
@@ -0,0 +1,40 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+
+/****************************************************************************/
+/**
+*  @file    intcHw.h
+*
+*  @brief   generic interrupt controller API
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+
+#ifndef _INTCHW_H
+#define _INTCHW_H
+
+/* ---- Include Files ---------------------------------------------------- */
+#include <mach/csp/intcHw_reg.h>
+
+/* ---- Public Constants and Types --------------------------------------- */
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+static inline void intcHw_irq_disable(void *basep, uint32_t mask);
+static inline void intcHw_irq_enable(void *basep, uint32_t mask);
+
+#endif /* _INTCHW_H */
+
diff --git a/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h b/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h
new file mode 100644
index 00000000000..e01fc4607c9
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h
@@ -0,0 +1,246 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    intcHw_reg.h
+*
+*  @brief   platform specific interrupt controller bit assignments
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+
+#ifndef _INTCHW_REG_H
+#define _INTCHW_REG_H
+
+/* ---- Include Files ---------------------------------------------------- */
+#include <csp/stdint.h>
+#include <csp/reg.h>
+#include <mach/csp/mm_io.h>
+
+/* ---- Public Constants and Types --------------------------------------- */
+
+#define INTCHW_NUM_IRQ_PER_INTC   32	/* Maximum number of interrupt controllers */
+#define INTCHW_NUM_INTC           3
+
+/* Defines for interrupt controllers. This simplifies and cleans up the function calls. */
+#define INTCHW_INTC0    ((void *)MM_IO_BASE_INTC0)
+#define INTCHW_INTC1    ((void *)MM_IO_BASE_INTC1)
+#define INTCHW_SINTC    ((void *)MM_IO_BASE_SINTC)
+
+/* INTC0 - interrupt controller 0 */
+#define INTCHW_INTC0_PIF_BITNUM           31	/* Peripheral interface interrupt */
+#define INTCHW_INTC0_CLCD_BITNUM          30	/* LCD Controller interrupt */
+#define INTCHW_INTC0_GE_BITNUM            29	/* Graphic engine interrupt */
+#define INTCHW_INTC0_APM_BITNUM           28	/* Audio process module interrupt */
+#define INTCHW_INTC0_ESW_BITNUM           27	/* Ethernet switch interrupt */
+#define INTCHW_INTC0_SPIH_BITNUM          26	/* SPI host interrupt */
+#define INTCHW_INTC0_TIMER3_BITNUM        25	/* Timer3 interrupt */
+#define INTCHW_INTC0_TIMER2_BITNUM        24	/* Timer2 interrupt */
+#define INTCHW_INTC0_TIMER1_BITNUM        23	/* Timer1 interrupt */
+#define INTCHW_INTC0_TIMER0_BITNUM        22	/* Timer0 interrupt */
+#define INTCHW_INTC0_SDIOH1_BITNUM        21	/* SDIO1 host interrupt */
+#define INTCHW_INTC0_SDIOH0_BITNUM        20	/* SDIO0 host interrupt */
+#define INTCHW_INTC0_USBD_BITNUM          19	/* USB device interrupt */
+#define INTCHW_INTC0_USBH1_BITNUM         18	/* USB1 host interrupt */
+#define INTCHW_INTC0_USBHD2_BITNUM        17	/* USB host2/device2 interrupt */
+#define INTCHW_INTC0_VPM_BITNUM           16	/* Voice process module interrupt */
+#define INTCHW_INTC0_DMA1C7_BITNUM        15	/* DMA1 channel 7 interrupt */
+#define INTCHW_INTC0_DMA1C6_BITNUM        14	/* DMA1 channel 6 interrupt */
+#define INTCHW_INTC0_DMA1C5_BITNUM        13	/* DMA1 channel 5 interrupt */
+#define INTCHW_INTC0_DMA1C4_BITNUM        12	/* DMA1 channel 4 interrupt */
+#define INTCHW_INTC0_DMA1C3_BITNUM        11	/* DMA1 channel 3 interrupt */
+#define INTCHW_INTC0_DMA1C2_BITNUM        10	/* DMA1 channel 2 interrupt */
+#define INTCHW_INTC0_DMA1C1_BITNUM         9	/* DMA1 channel 1 interrupt */
+#define INTCHW_INTC0_DMA1C0_BITNUM         8	/* DMA1 channel 0 interrupt */
+#define INTCHW_INTC0_DMA0C7_BITNUM         7	/* DMA0 channel 7 interrupt */
+#define INTCHW_INTC0_DMA0C6_BITNUM         6	/* DMA0 channel 6 interrupt */
+#define INTCHW_INTC0_DMA0C5_BITNUM         5	/* DMA0 channel 5 interrupt */
+#define INTCHW_INTC0_DMA0C4_BITNUM         4	/* DMA0 channel 4 interrupt */
+#define INTCHW_INTC0_DMA0C3_BITNUM         3	/* DMA0 channel 3 interrupt */
+#define INTCHW_INTC0_DMA0C2_BITNUM         2	/* DMA0 channel 2 interrupt */
+#define INTCHW_INTC0_DMA0C1_BITNUM         1	/* DMA0 channel 1 interrupt */
+#define INTCHW_INTC0_DMA0C0_BITNUM         0	/* DMA0 channel 0 interrupt */
+
+#define INTCHW_INTC0_PIF                  (1<<INTCHW_INTC0_PIF_BITNUM)
+#define INTCHW_INTC0_CLCD                 (1<<INTCHW_INTC0_CLCD_BITNUM)
+#define INTCHW_INTC0_GE                   (1<<INTCHW_INTC0_GE_BITNUM)
+#define INTCHW_INTC0_APM                  (1<<INTCHW_INTC0_APM_BITNUM)
+#define INTCHW_INTC0_ESW                  (1<<INTCHW_INTC0_ESW_BITNUM)
+#define INTCHW_INTC0_SPIH                 (1<<INTCHW_INTC0_SPIH_BITNUM)
+#define INTCHW_INTC0_TIMER3               (1<<INTCHW_INTC0_TIMER3_BITNUM)
+#define INTCHW_INTC0_TIMER2               (1<<INTCHW_INTC0_TIMER2_BITNUM)
+#define INTCHW_INTC0_TIMER1               (1<<INTCHW_INTC0_TIMER1_BITNUM)
+#define INTCHW_INTC0_TIMER0               (1<<INTCHW_INTC0_TIMER0_BITNUM)
+#define INTCHW_INTC0_SDIOH1               (1<<INTCHW_INTC0_SDIOH1_BITNUM)
+#define INTCHW_INTC0_SDIOH0               (1<<INTCHW_INTC0_SDIOH0_BITNUM)
+#define INTCHW_INTC0_USBD                 (1<<INTCHW_INTC0_USBD_BITNUM)
+#define INTCHW_INTC0_USBH1                (1<<INTCHW_INTC0_USBH1_BITNUM)
+#define INTCHW_INTC0_USBHD2               (1<<INTCHW_INTC0_USBHD2_BITNUM)
+#define INTCHW_INTC0_VPM                  (1<<INTCHW_INTC0_VPM_BITNUM)
+#define INTCHW_INTC0_DMA1C7               (1<<INTCHW_INTC0_DMA1C7_BITNUM)
+#define INTCHW_INTC0_DMA1C6               (1<<INTCHW_INTC0_DMA1C6_BITNUM)
+#define INTCHW_INTC0_DMA1C5               (1<<INTCHW_INTC0_DMA1C5_BITNUM)
+#define INTCHW_INTC0_DMA1C4               (1<<INTCHW_INTC0_DMA1C4_BITNUM)
+#define INTCHW_INTC0_DMA1C3               (1<<INTCHW_INTC0_DMA1C3_BITNUM)
+#define INTCHW_INTC0_DMA1C2               (1<<INTCHW_INTC0_DMA1C2_BITNUM)
+#define INTCHW_INTC0_DMA1C1               (1<<INTCHW_INTC0_DMA1C1_BITNUM)
+#define INTCHW_INTC0_DMA1C0               (1<<INTCHW_INTC0_DMA1C0_BITNUM)
+#define INTCHW_INTC0_DMA0C7               (1<<INTCHW_INTC0_DMA0C7_BITNUM)
+#define INTCHW_INTC0_DMA0C6               (1<<INTCHW_INTC0_DMA0C6_BITNUM)
+#define INTCHW_INTC0_DMA0C5               (1<<INTCHW_INTC0_DMA0C5_BITNUM)
+#define INTCHW_INTC0_DMA0C4               (1<<INTCHW_INTC0_DMA0C4_BITNUM)
+#define INTCHW_INTC0_DMA0C3               (1<<INTCHW_INTC0_DMA0C3_BITNUM)
+#define INTCHW_INTC0_DMA0C2               (1<<INTCHW_INTC0_DMA0C2_BITNUM)
+#define INTCHW_INTC0_DMA0C1               (1<<INTCHW_INTC0_DMA0C1_BITNUM)
+#define INTCHW_INTC0_DMA0C0               (1<<INTCHW_INTC0_DMA0C0_BITNUM)
+
+/* INTC1 - interrupt controller 1 */
+#define INTCHW_INTC1_DDRVPMP_BITNUM       27	/* DDR and VPM PLL clock phase relationship interupt (Not for A0) */
+#define INTCHW_INTC1_DDRVPMT_BITNUM       26	/* DDR and VPM HW phase align timeout interrupt (Not for A0) */
+#define INTCHW_INTC1_DDRP_BITNUM          26	/* DDR and PLL clock phase relationship interupt (For A0 only)) */
+#define INTCHW_INTC1_RTC2_BITNUM          25	/* Real time clock tamper interrupt */
+#define INTCHW_INTC1_VDEC_BITNUM          24	/* Hantro Video Decoder interrupt */
+/* Bits 13-23 are non-secure versions of the corresponding secure bits in SINTC bits 0-10. */
+#define INTCHW_INTC1_SPUM_BITNUM          23	/* Secure process module interrupt */
+#define INTCHW_INTC1_RTC1_BITNUM          22	/* Real time clock one-shot interrupt */
+#define INTCHW_INTC1_RTC0_BITNUM          21	/* Real time clock periodic interrupt */
+#define INTCHW_INTC1_RNG_BITNUM           20	/* Random number generator interrupt */
+#define INTCHW_INTC1_FMPU_BITNUM          19	/* Flash memory parition unit interrupt */
+#define INTCHW_INTC1_VMPU_BITNUM          18	/* VRAM memory partition interrupt */
+#define INTCHW_INTC1_DMPU_BITNUM          17	/* DDR2 memory partition interrupt */
+#define INTCHW_INTC1_KEYC_BITNUM          16	/* Key pad controller interrupt */
+#define INTCHW_INTC1_TSC_BITNUM           15	/* Touch screen controller interrupt */
+#define INTCHW_INTC1_UART0_BITNUM         14	/* UART 0 */
+#define INTCHW_INTC1_WDOG_BITNUM          13	/* Watchdog timer interrupt */
+
+#define INTCHW_INTC1_UART1_BITNUM         12	/* UART 1 */
+#define INTCHW_INTC1_PMUIRQ_BITNUM        11	/* ARM performance monitor interrupt */
+#define INTCHW_INTC1_COMMRX_BITNUM        10	/* ARM DDC receive interrupt */
+#define INTCHW_INTC1_COMMTX_BITNUM         9	/* ARM DDC transmit interrupt */
+#define INTCHW_INTC1_FLASHC_BITNUM         8	/* Flash controller interrupt */
+#define INTCHW_INTC1_GPHY_BITNUM           7	/* Gigabit Phy interrupt */
+#define INTCHW_INTC1_SPIS_BITNUM           6	/* SPI slave interrupt */
+#define INTCHW_INTC1_I2CS_BITNUM           5	/* I2C slave interrupt */
+#define INTCHW_INTC1_I2CH_BITNUM           4	/* I2C host interrupt */
+#define INTCHW_INTC1_I2S1_BITNUM           3	/* I2S1 interrupt */
+#define INTCHW_INTC1_I2S0_BITNUM           2	/* I2S0 interrupt */
+#define INTCHW_INTC1_GPIO1_BITNUM          1	/* GPIO bit 64//32 combined interrupt */
+#define INTCHW_INTC1_GPIO0_BITNUM          0	/* GPIO bit 31//0 combined interrupt */
+
+#define INTCHW_INTC1_DDRVPMT              (1<<INTCHW_INTC1_DDRVPMT_BITNUM)
+#define INTCHW_INTC1_DDRVPMP              (1<<INTCHW_INTC1_DDRVPMP_BITNUM)
+#define INTCHW_INTC1_DDRP                 (1<<INTCHW_INTC1_DDRP_BITNUM)
+#define INTCHW_INTC1_VDEC                 (1<<INTCHW_INTC1_VDEC_BITNUM)
+#define INTCHW_INTC1_SPUM                 (1<<INTCHW_INTC1_SPUM_BITNUM)
+#define INTCHW_INTC1_RTC2                 (1<<INTCHW_INTC1_RTC2_BITNUM)
+#define INTCHW_INTC1_RTC1                 (1<<INTCHW_INTC1_RTC1_BITNUM)
+#define INTCHW_INTC1_RTC0                 (1<<INTCHW_INTC1_RTC0_BITNUM)
+#define INTCHW_INTC1_RNG                  (1<<INTCHW_INTC1_RNG_BITNUM)
+#define INTCHW_INTC1_FMPU                 (1<<INTCHW_INTC1_FMPU_BITNUM)
+#define INTCHW_INTC1_IMPU                 (1<<INTCHW_INTC1_IMPU_BITNUM)
+#define INTCHW_INTC1_DMPU                 (1<<INTCHW_INTC1_DMPU_BITNUM)
+#define INTCHW_INTC1_KEYC                 (1<<INTCHW_INTC1_KEYC_BITNUM)
+#define INTCHW_INTC1_TSC                  (1<<INTCHW_INTC1_TSC_BITNUM)
+#define INTCHW_INTC1_UART0                (1<<INTCHW_INTC1_UART0_BITNUM)
+#define INTCHW_INTC1_WDOG                 (1<<INTCHW_INTC1_WDOG_BITNUM)
+#define INTCHW_INTC1_UART1                (1<<INTCHW_INTC1_UART1_BITNUM)
+#define INTCHW_INTC1_PMUIRQ               (1<<INTCHW_INTC1_PMUIRQ_BITNUM)
+#define INTCHW_INTC1_COMMRX               (1<<INTCHW_INTC1_COMMRX_BITNUM)
+#define INTCHW_INTC1_COMMTX               (1<<INTCHW_INTC1_COMMTX_BITNUM)
+#define INTCHW_INTC1_FLASHC               (1<<INTCHW_INTC1_FLASHC_BITNUM)
+#define INTCHW_INTC1_GPHY                 (1<<INTCHW_INTC1_GPHY_BITNUM)
+#define INTCHW_INTC1_SPIS                 (1<<INTCHW_INTC1_SPIS_BITNUM)
+#define INTCHW_INTC1_I2CS                 (1<<INTCHW_INTC1_I2CS_BITNUM)
+#define INTCHW_INTC1_I2CH                 (1<<INTCHW_INTC1_I2CH_BITNUM)
+#define INTCHW_INTC1_I2S1                 (1<<INTCHW_INTC1_I2S1_BITNUM)
+#define INTCHW_INTC1_I2S0                 (1<<INTCHW_INTC1_I2S0_BITNUM)
+#define INTCHW_INTC1_GPIO1                (1<<INTCHW_INTC1_GPIO1_BITNUM)
+#define INTCHW_INTC1_GPIO0                (1<<INTCHW_INTC1_GPIO0_BITNUM)
+
+/* SINTC secure int controller */
+#define INTCHW_SINTC_RTC2_BITNUM          15	/* Real time clock tamper interrupt */
+#define INTCHW_SINTC_TIMER3_BITNUM        14	/* Secure timer3 interrupt */
+#define INTCHW_SINTC_TIMER2_BITNUM        13	/* Secure timer2 interrupt */
+#define INTCHW_SINTC_TIMER1_BITNUM        12	/* Secure timer1 interrupt */
+#define INTCHW_SINTC_TIMER0_BITNUM        11	/* Secure timer0 interrupt */
+#define INTCHW_SINTC_SPUM_BITNUM          10	/* Secure process module interrupt */
+#define INTCHW_SINTC_RTC1_BITNUM           9	/* Real time clock one-shot interrupt */
+#define INTCHW_SINTC_RTC0_BITNUM           8	/* Real time clock periodic interrupt */
+#define INTCHW_SINTC_RNG_BITNUM            7	/* Random number generator interrupt */
+#define INTCHW_SINTC_FMPU_BITNUM           6	/* Flash memory parition unit interrupt */
+#define INTCHW_SINTC_VMPU_BITNUM           5	/* VRAM memory partition interrupt */
+#define INTCHW_SINTC_DMPU_BITNUM           4	/* DDR2 memory partition interrupt */
+#define INTCHW_SINTC_KEYC_BITNUM           3	/* Key pad controller interrupt */
+#define INTCHW_SINTC_TSC_BITNUM            2	/* Touch screen controller interrupt */
+#define INTCHW_SINTC_UART0_BITNUM          1	/* UART0 interrupt */
+#define INTCHW_SINTC_WDOG_BITNUM           0	/* Watchdog timer interrupt */
+
+#define INTCHW_SINTC_TIMER3               (1<<INTCHW_SINTC_TIMER3_BITNUM)
+#define INTCHW_SINTC_TIMER2               (1<<INTCHW_SINTC_TIMER2_BITNUM)
+#define INTCHW_SINTC_TIMER1               (1<<INTCHW_SINTC_TIMER1_BITNUM)
+#define INTCHW_SINTC_TIMER0               (1<<INTCHW_SINTC_TIMER0_BITNUM)
+#define INTCHW_SINTC_SPUM                 (1<<INTCHW_SINTC_SPUM_BITNUM)
+#define INTCHW_SINTC_RTC2                 (1<<INTCHW_SINTC_RTC2_BITNUM)
+#define INTCHW_SINTC_RTC1                 (1<<INTCHW_SINTC_RTC1_BITNUM)
+#define INTCHW_SINTC_RTC0                 (1<<INTCHW_SINTC_RTC0_BITNUM)
+#define INTCHW_SINTC_RNG                  (1<<INTCHW_SINTC_RNG_BITNUM)
+#define INTCHW_SINTC_FMPU                 (1<<INTCHW_SINTC_FMPU_BITNUM)
+#define INTCHW_SINTC_IMPU                 (1<<INTCHW_SINTC_IMPU_BITNUM)
+#define INTCHW_SINTC_DMPU                 (1<<INTCHW_SINTC_DMPU_BITNUM)
+#define INTCHW_SINTC_KEYC                 (1<<INTCHW_SINTC_KEYC_BITNUM)
+#define INTCHW_SINTC_TSC                  (1<<INTCHW_SINTC_TSC_BITNUM)
+#define INTCHW_SINTC_UART0                (1<<INTCHW_SINTC_UART0_BITNUM)
+#define INTCHW_SINTC_WDOG                 (1<<INTCHW_SINTC_WDOG_BITNUM)
+
+/* PL192 Vectored Interrupt Controller (VIC) layout */
+#define INTCHW_IRQSTATUS      0x00	/* IRQ status register */
+#define INTCHW_FIQSTATUS      0x04	/* FIQ status register */
+#define INTCHW_RAWINTR        0x08	/* Raw Interrupt Status register */
+#define INTCHW_INTSELECT      0x0c	/* Interrupt Select Register */
+#define INTCHW_INTENABLE      0x10	/* Interrupt Enable Register */
+#define INTCHW_INTENCLEAR     0x14	/* Interrupt Enable Clear Register */
+#define INTCHW_SOFTINT        0x18	/* Soft Interrupt Register */
+#define INTCHW_SOFTINTCLEAR   0x1c	/* Soft Interrupt Clear Register */
+#define INTCHW_PROTECTION     0x20	/* Protection Enable Register */
+#define INTCHW_SWPRIOMASK     0x24	/* Software Priority Mask Register */
+#define INTCHW_PRIODAISY      0x28	/* Priority Daisy Chain Register */
+#define INTCHW_VECTADDR0      0x100	/* Vector Address Registers */
+#define INTCHW_VECTPRIO0      0x200	/* Vector Priority Registers 0-31 */
+#define INTCHW_ADDRESS        0xf00	/* Vector Address Register 0-31 */
+#define INTCHW_PID            0xfe0	/* Peripheral ID Register 0-3 */
+#define INTCHW_PCELLID        0xff0	/* PrimeCell ID Register 0-3 */
+
+/* Example Usage: intcHw_irq_enable(INTCHW_INTC0, INTCHW_INTC0_TIMER0); */
+/*                intcHw_irq_clear(INTCHW_INTC0, INTCHW_INTC0_TIMER0); */
+/*                uint32_t bits = intcHw_irq_status(INTCHW_INTC0); */
+/*                uint32_t bits = intcHw_irq_raw_status(INTCHW_INTC0); */
+
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+/* Clear one or more IRQ interrupts. */
+static inline void intcHw_irq_disable(void *basep, uint32_t mask)
+{
+	__REG32(basep + INTCHW_INTENCLEAR) = mask;
+}
+
+/* Enables one or more IRQ interrupts. */
+static inline void intcHw_irq_enable(void *basep, uint32_t mask)
+{
+	__REG32(basep + INTCHW_INTENABLE) = mask;
+}
+
+#endif /* _INTCHW_REG_H */
diff --git a/arch/arm/mach-bcmring/include/mach/irqs.h b/arch/arm/mach-bcmring/include/mach/irqs.h
new file mode 100644
index 00000000000..b279b825d4a
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/irqs.h
@@ -0,0 +1,132 @@
+/*
+ *  Copyright (C) 2007 Broadcom
+ *  Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#if !defined(ARCH_BCMRING_IRQS_H)
+#define ARCH_BCMRING_IRQS_H
+
+/* INTC0 - interrupt controller 0 */
+#define IRQ_INTC0_START     0
+#define IRQ_DMA0C0          0	/* DMA0 channel 0 interrupt */
+#define IRQ_DMA0C1          1	/* DMA0 channel 1 interrupt */
+#define IRQ_DMA0C2          2	/* DMA0 channel 2 interrupt */
+#define IRQ_DMA0C3          3	/* DMA0 channel 3 interrupt */
+#define IRQ_DMA0C4          4	/* DMA0 channel 4 interrupt */
+#define IRQ_DMA0C5          5	/* DMA0 channel 5 interrupt */
+#define IRQ_DMA0C6          6	/* DMA0 channel 6 interrupt */
+#define IRQ_DMA0C7          7	/* DMA0 channel 7 interrupt */
+#define IRQ_DMA1C0          8	/* DMA1 channel 0 interrupt */
+#define IRQ_DMA1C1          9	/* DMA1 channel 1 interrupt */
+#define IRQ_DMA1C2         10	/* DMA1 channel 2 interrupt */
+#define IRQ_DMA1C3         11	/* DMA1 channel 3 interrupt */
+#define IRQ_DMA1C4         12	/* DMA1 channel 4 interrupt */
+#define IRQ_DMA1C5         13	/* DMA1 channel 5 interrupt */
+#define IRQ_DMA1C6         14	/* DMA1 channel 6 interrupt */
+#define IRQ_DMA1C7         15	/* DMA1 channel 7 interrupt */
+#define IRQ_VPM            16	/* Voice process module interrupt */
+#define IRQ_USBHD2         17	/* USB host2/device2 interrupt */
+#define IRQ_USBH1          18	/* USB1 host interrupt */
+#define IRQ_USBD           19	/* USB device interrupt */
+#define IRQ_SDIOH0         20	/* SDIO0 host interrupt */
+#define IRQ_SDIOH1         21	/* SDIO1 host interrupt */
+#define IRQ_TIMER0         22	/* Timer0 interrupt */
+#define IRQ_TIMER1         23	/* Timer1 interrupt */
+#define IRQ_TIMER2         24	/* Timer2 interrupt */
+#define IRQ_TIMER3         25	/* Timer3 interrupt */
+#define IRQ_SPIH           26	/* SPI host interrupt */
+#define IRQ_ESW            27	/* Ethernet switch interrupt */
+#define IRQ_APM            28	/* Audio process module interrupt */
+#define IRQ_GE             29	/* Graphic engine interrupt */
+#define IRQ_CLCD           30	/* LCD Controller interrupt */
+#define IRQ_PIF            31	/* Peripheral interface interrupt */
+#define IRQ_INTC0_END      31
+
+/* INTC1 - interrupt controller 1 */
+#define IRQ_INTC1_START    32
+#define IRQ_GPIO0          32	/*  0 GPIO bit 31//0 combined interrupt */
+#define IRQ_GPIO1          33	/*  1 GPIO bit 64//32 combined interrupt */
+#define IRQ_I2S0           34	/*  2 I2S0 interrupt */
+#define IRQ_I2S1           35	/*  3 I2S1 interrupt */
+#define IRQ_I2CH           36	/*  4 I2C host interrupt */
+#define IRQ_I2CS           37	/*  5 I2C slave interrupt */
+#define IRQ_SPIS           38	/*  6 SPI slave interrupt */
+#define IRQ_GPHY           39	/*  7 Gigabit Phy interrupt */
+#define IRQ_FLASHC         40	/*  8 Flash controller interrupt */
+#define IRQ_COMMTX         41	/*  9 ARM DDC transmit interrupt */
+#define IRQ_COMMRX         42	/* 10 ARM DDC receive interrupt */
+#define IRQ_PMUIRQ         43	/* 11 ARM performance monitor interrupt */
+#define IRQ_UARTB          44	/* 12 UARTB */
+#define IRQ_WATCHDOG       45	/* 13 Watchdog timer interrupt */
+#define IRQ_UARTA          46	/* 14 UARTA */
+#define IRQ_TSC            47	/* 15 Touch screen controller interrupt */
+#define IRQ_KEYC           48	/* 16 Key pad controller interrupt */
+#define IRQ_DMPU           49	/* 17 DDR2 memory partition interrupt */
+#define IRQ_VMPU           50	/* 18 VRAM memory partition interrupt */
+#define IRQ_FMPU           51	/* 19 Flash memory parition unit interrupt */
+#define IRQ_RNG            52	/* 20 Random number generator interrupt */
+#define IRQ_RTC0           53	/* 21 Real time clock periodic interrupt */
+#define IRQ_RTC1           54	/* 22 Real time clock one-shot interrupt */
+#define IRQ_SPUM           55	/* 23 Secure process module interrupt */
+#define IRQ_VDEC           56	/* 24 Hantro video decoder interrupt */
+#define IRQ_RTC2           57	/* 25 Real time clock tamper interrupt */
+#define IRQ_DDRP           58	/* 26 DDR Panic interrupt */
+#define IRQ_INTC1_END      58
+
+/* SINTC secure int controller */
+#define IRQ_SINTC_START    59
+#define IRQ_SEC_WATCHDOG   59	/*  0 Watchdog timer interrupt */
+#define IRQ_SEC_UARTA      60	/*  1 UARTA interrupt */
+#define IRQ_SEC_TSC        61	/*  2 Touch screen controller interrupt */
+#define IRQ_SEC_KEYC       62	/*  3 Key pad controller interrupt */
+#define IRQ_SEC_DMPU       63	/*  4 DDR2 memory partition interrupt */
+#define IRQ_SEC_VMPU       64	/*  5 VRAM memory partition interrupt */
+#define IRQ_SEC_FMPU       65	/*  6 Flash memory parition unit interrupt */
+#define IRQ_SEC_RNG        66	/*  7 Random number generator interrupt */
+#define IRQ_SEC_RTC0       67	/*  8 Real time clock periodic interrupt */
+#define IRQ_SEC_RTC1       68	/*  9 Real time clock one-shot interrupt */
+#define IRQ_SEC_SPUM       69	/* 10 Secure process module interrupt */
+#define IRQ_SEC_TIMER0     70	/* 11 Secure timer0 interrupt */
+#define IRQ_SEC_TIMER1     71	/* 12 Secure timer1 interrupt */
+#define IRQ_SEC_TIMER2     72	/* 13 Secure timer2 interrupt */
+#define IRQ_SEC_TIMER3     73	/* 14 Secure timer3 interrupt */
+#define IRQ_SEC_RTC2       74	/* 15 Real time clock tamper interrupt */
+
+#define IRQ_SINTC_END      74
+
+/* Note: there are 3 INTC registers of 32 bits each. So internal IRQs could go from 0-95 */
+/*       Since IRQs are typically viewed in decimal, we start the gpio based IRQs off at 100 */
+/*       to make the mapping easy for humans to decipher. */
+
+#define IRQ_GPIO_0                  100
+
+#define NUM_INTERNAL_IRQS          (IRQ_SINTC_END+1)
+
+/* I couldn't get the gpioHw_reg.h file to be included cleanly, so I hardcoded it */
+/* define NUM_GPIO_IRQS               GPIOHW_TOTAL_NUM_PINS */
+#define NUM_GPIO_IRQS               62
+
+#define NR_IRQS                     (IRQ_GPIO_0 + NUM_GPIO_IRQS)
+
+#define IRQ_UNKNOWN                 -1
+
+/* Tune these bits to preclude noisy or unsupported interrupt sources as required. */
+#define IRQ_INTC0_VALID_MASK        0xffffffff
+#define IRQ_INTC1_VALID_MASK        0x07ffffff
+#define IRQ_SINTC_VALID_MASK        0x0000ffff
+
+#endif /* ARCH_BCMRING_IRQS_H */
diff --git a/arch/arm/mach-bcmring/irq.c b/arch/arm/mach-bcmring/irq.c
new file mode 100644
index 00000000000..dc1c4939b0c
--- /dev/null
+++ b/arch/arm/mach-bcmring/irq.c
@@ -0,0 +1,127 @@
+/*
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <linux/init.h>
+#include <linux/stddef.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/version.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
+
+#include <asm/mach/irq.h>
+#include <mach/csp/intcHw_reg.h>
+#include <mach/csp/mm_io.h>
+
+static void bcmring_mask_irq0(unsigned int irq)
+{
+	writel(1 << (irq - IRQ_INTC0_START),
+	       MM_IO_BASE_INTC0 + INTCHW_INTENCLEAR);
+}
+
+static void bcmring_unmask_irq0(unsigned int irq)
+{
+	writel(1 << (irq - IRQ_INTC0_START),
+	       MM_IO_BASE_INTC0 + INTCHW_INTENABLE);
+}
+
+static void bcmring_mask_irq1(unsigned int irq)
+{
+	writel(1 << (irq - IRQ_INTC1_START),
+	       MM_IO_BASE_INTC1 + INTCHW_INTENCLEAR);
+}
+
+static void bcmring_unmask_irq1(unsigned int irq)
+{
+	writel(1 << (irq - IRQ_INTC1_START),
+	       MM_IO_BASE_INTC1 + INTCHW_INTENABLE);
+}
+
+static void bcmring_mask_irq2(unsigned int irq)
+{
+	writel(1 << (irq - IRQ_SINTC_START),
+	       MM_IO_BASE_SINTC + INTCHW_INTENCLEAR);
+}
+
+static void bcmring_unmask_irq2(unsigned int irq)
+{
+	writel(1 << (irq - IRQ_SINTC_START),
+	       MM_IO_BASE_SINTC + INTCHW_INTENABLE);
+}
+
+static struct irq_chip bcmring_irq0_chip = {
+	.typename = "ARM-INTC0",
+	.ack = bcmring_mask_irq0,
+	.mask = bcmring_mask_irq0,	/* mask a specific interrupt, blocking its delivery. */
+	.unmask = bcmring_unmask_irq0,	/* unmaks an interrupt */
+};
+
+static struct irq_chip bcmring_irq1_chip = {
+	.typename = "ARM-INTC1",
+	.ack = bcmring_mask_irq1,
+	.mask = bcmring_mask_irq1,
+	.unmask = bcmring_unmask_irq1,
+};
+
+static struct irq_chip bcmring_irq2_chip = {
+	.typename = "ARM-SINTC",
+	.ack = bcmring_mask_irq2,
+	.mask = bcmring_mask_irq2,
+	.unmask = bcmring_unmask_irq2,
+};
+
+static void vic_init(void __iomem *base, struct irq_chip *chip,
+		     unsigned int irq_start, unsigned int vic_sources)
+{
+	unsigned int i;
+	for (i = 0; i < 32; i++) {
+		unsigned int irq = irq_start + i;
+		set_irq_chip(irq, chip);
+		set_irq_chip_data(irq, base);
+
+		if (vic_sources & (1 << i)) {
+			set_irq_handler(irq, handle_level_irq);
+			set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+		}
+	}
+	writel(0, base + INTCHW_INTSELECT);
+	writel(0, base + INTCHW_INTENABLE);
+	writel(~0, base + INTCHW_INTENCLEAR);
+	writel(0, base + INTCHW_IRQSTATUS);
+	writel(~0, base + INTCHW_SOFTINTCLEAR);
+}
+
+void __init bcmring_init_irq(void)
+{
+	vic_init((void __iomem *)MM_IO_BASE_INTC0, &bcmring_irq0_chip,
+		 IRQ_INTC0_START, IRQ_INTC0_VALID_MASK);
+	vic_init((void __iomem *)MM_IO_BASE_INTC1, &bcmring_irq1_chip,
+		 IRQ_INTC1_START, IRQ_INTC1_VALID_MASK);
+	vic_init((void __iomem *)MM_IO_BASE_SINTC, &bcmring_irq2_chip,
+		 IRQ_SINTC_START, IRQ_SINTC_VALID_MASK);
+
+	/* special cases */
+	if (INTCHW_INTC1_GPIO0 & IRQ_INTC1_VALID_MASK) {
+		set_irq_handler(IRQ_GPIO0, handle_simple_irq);
+	}
+	if (INTCHW_INTC1_GPIO1 & IRQ_INTC1_VALID_MASK) {
+		set_irq_handler(IRQ_GPIO1, handle_simple_irq);
+	}
+}
-- 
cgit v1.2.3


From 661f78d80969eefb25a0e99c08c0eba81b37861e Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Fri, 7 Aug 2009 19:59:57 +0100
Subject: ARM: 5646/1: bcmring: add mach-bcmring/mm.c and memory headers

memory map addresses
memory map description and init functions

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-bcmring/include/mach/csp/mm_addr.h   | 101 ++++++++++++++
 arch/arm/mach-bcmring/include/mach/csp/mm_io.h     | 147 +++++++++++++++++++++
 arch/arm/mach-bcmring/include/mach/memory.h        |  33 +++++
 .../mach-bcmring/include/mach/memory_settings.h    |  67 ++++++++++
 arch/arm/mach-bcmring/include/mach/vmalloc.h       |  25 ++++
 arch/arm/mach-bcmring/mm.c                         |  56 ++++++++
 6 files changed, 429 insertions(+)
 create mode 100644 arch/arm/mach-bcmring/include/mach/csp/mm_addr.h
 create mode 100644 arch/arm/mach-bcmring/include/mach/csp/mm_io.h
 create mode 100644 arch/arm/mach-bcmring/include/mach/memory.h
 create mode 100644 arch/arm/mach-bcmring/include/mach/memory_settings.h
 create mode 100644 arch/arm/mach-bcmring/include/mach/vmalloc.h
 create mode 100644 arch/arm/mach-bcmring/mm.c

(limited to 'arch')

diff --git a/arch/arm/mach-bcmring/include/mach/csp/mm_addr.h b/arch/arm/mach-bcmring/include/mach/csp/mm_addr.h
new file mode 100644
index 00000000000..86bb58d4f58
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/mm_addr.h
@@ -0,0 +1,101 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    mm_addr.h
+*
+*  @brief   Memory Map address defintions
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+
+#ifndef _MM_ADDR_H
+#define _MM_ADDR_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#if !defined(CSP_SIMULATION)
+#include <cfg_global.h>
+#endif
+
+/* ---- Public Constants and Types --------------------------------------- */
+
+/*  Memory Map address definitions */
+
+#define MM_ADDR_DDR                0x00000000
+
+#define MM_ADDR_IO_VPM_EXTMEM_RSVD 0x0F000000	/* 16 MB - Reserved external memory for VPM use */
+
+#define MM_ADDR_IO_FLASHC          0x20000000
+#define MM_ADDR_IO_BROM            0x30000000
+#define MM_ADDR_IO_ARAM            0x30100000	/* 64 KB - extra cycle latency - WS switch */
+#define MM_ADDR_IO_DMA0            0x30200000
+#define MM_ADDR_IO_DMA1            0x30300000
+#define MM_ADDR_IO_ESW             0x30400000
+#define MM_ADDR_IO_CLCD            0x30500000
+#define MM_ADDR_IO_PIF             0x30580000
+#define MM_ADDR_IO_APM             0x30600000
+#define MM_ADDR_IO_SPUM            0x30700000
+#define MM_ADDR_IO_VPM_PROG        0x30800000
+#define MM_ADDR_IO_VPM_DATA        0x30A00000
+#define MM_ADDR_IO_VRAM            0x40000000	/* 64 KB  - security block in front of it */
+#define MM_ADDR_IO_CHIPC           0x80000000
+#define MM_ADDR_IO_UMI             0x80001000
+#define MM_ADDR_IO_NAND            0x80001800
+#define MM_ADDR_IO_LEDM            0x80002000
+#define MM_ADDR_IO_PWM             0x80002040
+#define MM_ADDR_IO_VINTC           0x80003000
+#define MM_ADDR_IO_GPIO0           0x80004000
+#define MM_ADDR_IO_GPIO1           0x80004800
+#define MM_ADDR_IO_I2CS            0x80005000
+#define MM_ADDR_IO_SPIS            0x80006000
+#define MM_ADDR_IO_HPM             0x80007400
+#define MM_ADDR_IO_HPM_REMAP       0x80007800
+#define MM_ADDR_IO_TZPC            0x80008000
+#define MM_ADDR_IO_MPU             0x80009000
+#define MM_ADDR_IO_SPUMP           0x8000a000
+#define MM_ADDR_IO_PKA             0x8000b000
+#define MM_ADDR_IO_RNG             0x8000c000
+#define MM_ADDR_IO_KEYC            0x8000d000
+#define MM_ADDR_IO_BBL             0x8000e000
+#define MM_ADDR_IO_OTP             0x8000f000
+#define MM_ADDR_IO_I2S0            0x80010000
+#define MM_ADDR_IO_I2S1            0x80011000
+#define MM_ADDR_IO_UARTA           0x80012000
+#define MM_ADDR_IO_UARTB           0x80013000
+#define MM_ADDR_IO_I2CH            0x80014020
+#define MM_ADDR_IO_SPIH            0x80015000
+#define MM_ADDR_IO_TSC             0x80016000
+#define MM_ADDR_IO_TMR             0x80017000
+#define MM_ADDR_IO_WATCHDOG        0x80017800
+#define MM_ADDR_IO_ETM             0x80018000
+#define MM_ADDR_IO_DDRC            0x80019000
+#define MM_ADDR_IO_SINTC           0x80100000
+#define MM_ADDR_IO_INTC0           0x80200000
+#define MM_ADDR_IO_INTC1           0x80201000
+#define MM_ADDR_IO_GE              0x80300000
+#define MM_ADDR_IO_USB_CTLR0       0x80400000
+#define MM_ADDR_IO_USB_CTLR1       0x80410000
+#define MM_ADDR_IO_USB_PHY         0x80420000
+#define MM_ADDR_IO_SDIOH0          0x80500000
+#define MM_ADDR_IO_SDIOH1          0x80600000
+#define MM_ADDR_IO_VDEC            0x80700000
+
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+#endif /* _MM_ADDR_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/mm_io.h b/arch/arm/mach-bcmring/include/mach/csp/mm_io.h
new file mode 100644
index 00000000000..de92ec6a01a
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/mm_io.h
@@ -0,0 +1,147 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    mm_io.h
+*
+*  @brief   Memory Map I/O definitions
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+
+#ifndef _MM_IO_H
+#define _MM_IO_H
+
+/* ---- Include Files ---------------------------------------------------- */
+#include <mach/csp/mm_addr.h>
+
+#if !defined(CSP_SIMULATION)
+#include <cfg_global.h>
+#endif
+
+/* ---- Public Constants and Types --------------------------------------- */
+
+#if defined(CONFIG_MMU)
+
+/* This macro is referenced in <mach/io.h>
+ * Phys to Virtual 0xNyxxxxxx => 0xFNxxxxxx
+ * This macro is referenced in <asm/arch/io.h>
+ *
+ * Assume VPM address is the last x MB of memory.  For VPM, map to
+ * 0xf0000000 and up.
+ */
+
+#ifndef MM_IO_PHYS_TO_VIRT
+#ifdef __ASSEMBLY__
+#define MM_IO_PHYS_TO_VIRT(phys)       (0xF0000000 | (((phys) >> 4) & 0x0F000000) | ((phys) & 0xFFFFFF))
+#else
+#define MM_IO_PHYS_TO_VIRT(phys)       (((phys) == MM_ADDR_IO_VPM_EXTMEM_RSVD) ? 0xF0000000 : \
+			(0xF0000000 | (((phys) >> 4) & 0x0F000000) | ((phys) & 0xFFFFFF)))
+#endif
+#endif
+
+/* Virtual to Physical 0xFNxxxxxx => 0xN0xxxxxx */
+
+#ifndef MM_IO_VIRT_TO_PHYS
+#ifdef __ASSEMBLY__
+#define MM_IO_VIRT_TO_PHYS(virt)       ((((virt) & 0x0F000000) << 4) | ((virt) & 0xFFFFFF))
+#else
+#define MM_IO_VIRT_TO_PHYS(virt)       (((virt) == 0xF0000000) ? MM_ADDR_IO_VPM_EXTMEM_RSVD : \
+			((((virt) & 0x0F000000) << 4) | ((virt) & 0xFFFFFF)))
+#endif
+#endif
+
+#else
+
+#ifndef MM_IO_PHYS_TO_VIRT
+#define MM_IO_PHYS_TO_VIRT(phys)       (phys)
+#endif
+
+#ifndef MM_IO_VIRT_TO_PHYS
+#define MM_IO_VIRT_TO_PHYS(virt)       (virt)
+#endif
+
+#endif
+
+/* Registers in 0xExxxxxxx that should be moved to 0xFxxxxxxx */
+#define MM_IO_BASE_FLASHC              MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_FLASHC)
+#define MM_IO_BASE_NAND                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_NAND)
+#define MM_IO_BASE_UMI                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_UMI)
+
+#define MM_IO_START MM_ADDR_IO_FLASHC	/* Physical beginning of IO mapped memory */
+#define MM_IO_BASE  MM_IO_BASE_FLASHC	/* Virtual beginning of IO mapped memory */
+
+#define MM_IO_BASE_BROM                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_BROM)
+#define MM_IO_BASE_ARAM                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_ARAM)
+#define MM_IO_BASE_DMA0                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_DMA0)
+#define MM_IO_BASE_DMA1                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_DMA1)
+#define MM_IO_BASE_ESW                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_ESW)
+#define MM_IO_BASE_CLCD                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_CLCD)
+#define MM_IO_BASE_PIF                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_PIF)
+#define MM_IO_BASE_APM                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_APM)
+#define MM_IO_BASE_SPUM                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SPUM)
+#define MM_IO_BASE_VPM_PROG            MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_VPM_PROG)
+#define MM_IO_BASE_VPM_DATA            MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_VPM_DATA)
+
+#define MM_IO_BASE_VRAM                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_VRAM)
+
+#define MM_IO_BASE_CHIPC               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_CHIPC)
+#define MM_IO_BASE_DDRC                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_DDRC)
+#define MM_IO_BASE_LEDM                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_LEDM)
+#define MM_IO_BASE_PWM                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_PWM)
+#define MM_IO_BASE_VINTC               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_VINTC)
+#define MM_IO_BASE_GPIO0               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_GPIO0)
+#define MM_IO_BASE_GPIO1               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_GPIO1)
+#define MM_IO_BASE_TMR                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_TMR)
+#define MM_IO_BASE_WATCHDOG            MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_WATCHDOG)
+#define MM_IO_BASE_ETM                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_ETM)
+#define MM_IO_BASE_HPM                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_HPM)
+#define MM_IO_BASE_HPM_REMAP           MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_HPM_REMAP)
+#define MM_IO_BASE_TZPC                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_TZPC)
+#define MM_IO_BASE_MPU                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_MPU)
+#define MM_IO_BASE_SPUMP               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SPUMP)
+#define MM_IO_BASE_PKA                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_PKA)
+#define MM_IO_BASE_RNG                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_RNG)
+#define MM_IO_BASE_KEYC                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_KEYC)
+#define MM_IO_BASE_BBL                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_BBL)
+#define MM_IO_BASE_OTP                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_OTP)
+#define MM_IO_BASE_I2S0                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_I2S0)
+#define MM_IO_BASE_I2S1                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_I2S1)
+#define MM_IO_BASE_UARTA               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_UARTA)
+#define MM_IO_BASE_UARTB               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_UARTB)
+#define MM_IO_BASE_I2CH                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_I2CH)
+#define MM_IO_BASE_SPIH                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SPIH)
+#define MM_IO_BASE_TSC                 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_TSC)
+#define MM_IO_BASE_I2CS                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_I2CS)
+#define MM_IO_BASE_SPIS                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SPIS)
+#define MM_IO_BASE_SINTC               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SINTC)
+#define MM_IO_BASE_INTC0               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_INTC0)
+#define MM_IO_BASE_INTC1               MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_INTC1)
+#define MM_IO_BASE_GE                  MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_GE)
+#define MM_IO_BASE_USB_CTLR0           MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_USB_CTLR0)
+#define MM_IO_BASE_USB_CTLR1           MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_USB_CTLR1)
+#define MM_IO_BASE_USB_PHY             MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_USB_PHY)
+#define MM_IO_BASE_SDIOH0              MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SDIOH0)
+#define MM_IO_BASE_SDIOH1              MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SDIOH1)
+#define MM_IO_BASE_VDEC                MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_VDEC)
+
+#define MM_IO_BASE_VPM_EXTMEM_RSVD     MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_VPM_EXTMEM_RSVD)
+
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+#endif /* _MM_IO_H */
diff --git a/arch/arm/mach-bcmring/include/mach/memory.h b/arch/arm/mach-bcmring/include/mach/memory.h
new file mode 100644
index 00000000000..114f942bb4f
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/memory.h
@@ -0,0 +1,33 @@
+/*****************************************************************************
+* Copyright 2005 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#include <cfg_global.h>
+
+/*
+ * Physical vs virtual RAM address space conversion.  These are
+ * private definitions which should NOT be used outside memory.h
+ * files.  Use virt_to_phys/phys_to_virt/__pa/__va instead.
+ */
+
+#define PHYS_OFFSET CFG_GLOBAL_RAM_BASE
+
+/*
+ * Maximum DMA memory allowed is 14M
+ */
+#define CONSISTENT_DMA_SIZE (SZ_16M - SZ_2M)
+
+#endif
diff --git a/arch/arm/mach-bcmring/include/mach/memory_settings.h b/arch/arm/mach-bcmring/include/mach/memory_settings.h
new file mode 100644
index 00000000000..ce5cd16f2ac
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/memory_settings.h
@@ -0,0 +1,67 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef MEMORY_SETTINGS_H
+#define MEMORY_SETTINGS_H
+
+/* ---- Include Files ---------------------------------------- */
+/* ---- Constants and Types ---------------------------------- */
+
+/* Memory devices */
+/* NAND Flash timing for 166 MHz setting */
+#define HW_CFG_NAND_tBTA  (5 << 16)	/* Bus turnaround cycle (n)        0-7  (30 ns) */
+#define HW_CFG_NAND_tWP   (4 << 11)	/* Write pulse width cycle (n+1)   0-31 (25 ns) */
+#define HW_CFG_NAND_tWR   (1 << 9)	/* Write recovery cycle (n+1)      0-3  (10 ns) */
+#define HW_CFG_NAND_tAS   (0 << 7)	/* Write address setup cycle (n+1) 0-3  ( 0 ns) */
+#define HW_CFG_NAND_tOE   (3 << 5)	/* Output enable delay cycle (n)   0-3  (15 ns) */
+#define HW_CFG_NAND_tRC   (7 << 0)	/* Read access cycle (n+2)         0-31 (50 ns) */
+
+#define HW_CFG_NAND_TCR (HW_CFG_NAND_tBTA \
+	| HW_CFG_NAND_tWP  \
+	| HW_CFG_NAND_tWR  \
+	| HW_CFG_NAND_tAS  \
+	| HW_CFG_NAND_tOE  \
+	| HW_CFG_NAND_tRC)
+
+/* NOR Flash timing for 166 MHz setting */
+#define HW_CFG_NOR_TPRC_TWLC (0 << 19)	/* Page read access cycle / Burst write latency (n+2 / n+1) (max 25ns) */
+#define HW_CFG_NOR_TBTA      (0 << 16)	/* Bus turnaround cycle (n)                                 (DNA)      */
+#define HW_CFG_NOR_TWP       (6 << 11)	/* Write pulse width cycle (n+1)                            (35ns)     */
+#define HW_CFG_NOR_TWR       (0 << 9)	/* Write recovery cycle (n+1)                               (0ns)      */
+#define HW_CFG_NOR_TAS       (0 << 7)	/* Write address setup cycle (n+1)                          (0ns)      */
+#define HW_CFG_NOR_TOE       (0 << 5)	/* Output enable delay cycle (n)                            (max 25ns) */
+#define HW_CFG_NOR_TRC_TLC   (0x10 << 0)	/* Read access cycle / Burst read latency (n+2 / n+1)       (100ns)    */
+
+#define HW_CFG_FLASH0_TCR (HW_CFG_NOR_TPRC_TWLC \
+	| HW_CFG_NOR_TBTA      \
+	| HW_CFG_NOR_TWP       \
+	| HW_CFG_NOR_TWR       \
+	| HW_CFG_NOR_TAS       \
+	| HW_CFG_NOR_TOE       \
+	| HW_CFG_NOR_TRC_TLC)
+
+#define HW_CFG_FLASH1_TCR    HW_CFG_FLASH0_TCR
+#define HW_CFG_FLASH2_TCR    HW_CFG_FLASH0_TCR
+
+/* SDRAM Settings */
+/* #define HW_CFG_SDRAM_CAS_LATENCY        5    Default 5, Values [3..6] */
+/* #define HW_CFG_SDRAM_CHIP_SELECT_CNT    1    Default 1, Vaules [1..2] */
+/* #define HW_CFG_SDRAM_SPEED_GRADE        667  Default 667, Values [400,533,667,800] */
+/* #define HW_CFG_SDRAM_WIDTH_BITS         16   Default 16, Vaules [8,16] */
+#define HW_CFG_SDRAM_SIZE_BYTES         0x10000000	/* Total memory, not per device size */
+
+/* ---- Variable Externs ------------------------------------- */
+/* ---- Function Prototypes ---------------------------------- */
+
+#endif /* MEMORY_SETTINGS_H */
diff --git a/arch/arm/mach-bcmring/include/mach/vmalloc.h b/arch/arm/mach-bcmring/include/mach/vmalloc.h
new file mode 100644
index 00000000000..35e2ead8395
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/vmalloc.h
@@ -0,0 +1,25 @@
+/*
+ *
+ *  Copyright (C) 2000 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+/*
+ * Move VMALLOC_END to 0xf0000000 so that the vm space can range from
+ * 0xe0000000 to 0xefffffff. This gives us 256 MB of vm space and handles
+ * larger physical memory designs better.
+ */
+#define VMALLOC_END       (PAGE_OFFSET + 0x30000000)
diff --git a/arch/arm/mach-bcmring/mm.c b/arch/arm/mach-bcmring/mm.c
new file mode 100644
index 00000000000..0f1c37e4523
--- /dev/null
+++ b/arch/arm/mach-bcmring/mm.c
@@ -0,0 +1,56 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#include <linux/platform_device.h>
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/csp/mm_io.h>
+
+#define IO_DESC(va, sz) { .virtual = va, \
+	.pfn = __phys_to_pfn(HW_IO_VIRT_TO_PHYS(va)), \
+	.length = sz, \
+	.type = MT_DEVICE }
+
+#define MEM_DESC(va, sz) { .virtual = va, \
+	.pfn = __phys_to_pfn(HW_IO_VIRT_TO_PHYS(va)), \
+	.length = sz, \
+	.type = MT_MEMORY }
+
+static struct map_desc bcmring_io_desc[] __initdata = {
+	IO_DESC(MM_IO_BASE_NAND, SZ_64K),	/* phys:0x28000000-0x28000FFF  virt:0xE8000000-0xE8000FFF  size:0x00010000 */
+	IO_DESC(MM_IO_BASE_UMI, SZ_64K),	/* phys:0x2C000000-0x2C000FFF  virt:0xEC000000-0xEC000FFF  size:0x00010000 */
+
+	IO_DESC(MM_IO_BASE_BROM, SZ_64K),	/* phys:0x30000000-0x3000FFFF  virt:0xF3000000-0xF300FFFF  size:0x00010000 */
+	MEM_DESC(MM_IO_BASE_ARAM, SZ_1M),	/* phys:0x31000000-0x31FFFFFF  virt:0xF3100000-0xF31FFFFF  size:0x01000000 */
+	IO_DESC(MM_IO_BASE_DMA0, SZ_1M),	/* phys:0x32000000-0x32FFFFFF  virt:0xF3200000-0xF32FFFFF  size:0x01000000 */
+	IO_DESC(MM_IO_BASE_DMA1, SZ_1M),	/* phys:0x33000000-0x33FFFFFF  virt:0xF3300000-0xF33FFFFF  size:0x01000000 */
+	IO_DESC(MM_IO_BASE_ESW, SZ_1M),	/* phys:0x34000000-0x34FFFFFF  virt:0xF3400000-0xF34FFFFF  size:0x01000000 */
+	IO_DESC(MM_IO_BASE_CLCD, SZ_1M),	/* phys:0x35000000-0x35FFFFFF  virt:0xF3500000-0xF35FFFFF  size:0x01000000 */
+	IO_DESC(MM_IO_BASE_APM, SZ_1M),	/* phys:0x36000000-0x36FFFFFF  virt:0xF3600000-0xF36FFFFF  size:0x01000000 */
+	IO_DESC(MM_IO_BASE_SPUM, SZ_1M),	/* phys:0x37000000-0x37FFFFFF  virt:0xF3700000-0xF37FFFFF  size:0x01000000 */
+	IO_DESC(MM_IO_BASE_VPM_PROG, SZ_1M),	/* phys:0x38000000-0x38FFFFFF  virt:0xF3800000-0xF38FFFFF  size:0x01000000 */
+	IO_DESC(MM_IO_BASE_VPM_DATA, SZ_1M),	/* phys:0x3A000000-0x3AFFFFFF  virt:0xF3A00000-0xF3AFFFFF  size:0x01000000 */
+
+	IO_DESC(MM_IO_BASE_VRAM, SZ_64K),	/* phys:0x40000000-0x4000FFFF  virt:0xF4000000-0xF400FFFF  size:0x00010000 */
+	IO_DESC(MM_IO_BASE_CHIPC, SZ_16M),	/* phys:0x80000000-0x80FFFFFF  virt:0xF8000000-0xF8FFFFFF  size:0x01000000 */
+	IO_DESC(MM_IO_BASE_VPM_EXTMEM_RSVD,
+		SZ_16M),	/* phys:0x0F000000-0x0FFFFFFF  virt:0xF0000000-0xF0FFFFFF  size:0x01000000 */
+};
+
+void __init bcmring_map_io(void)
+{
+
+	iotable_init(bcmring_io_desc, ARRAY_SIZE(bcmring_io_desc));
+}
-- 
cgit v1.2.3


From 7c4c2951c0077eecf9a9dfda59a43eedd09a01f4 Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Fri, 7 Aug 2009 20:00:39 +0100
Subject: ARM: 5647/1: bcmring: add bcmring dma.h and dma_device.c

add bcmring dma.h and dma_device.c

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-bcmring/dma_device.c       | 593 ++++++++++++++++++++++
 arch/arm/mach-bcmring/include/mach/dma.h | 826 +++++++++++++++++++++++++++++++
 2 files changed, 1419 insertions(+)
 create mode 100644 arch/arm/mach-bcmring/dma_device.c
 create mode 100644 arch/arm/mach-bcmring/include/mach/dma.h

(limited to 'arch')

diff --git a/arch/arm/mach-bcmring/dma_device.c b/arch/arm/mach-bcmring/dma_device.c
new file mode 100644
index 00000000000..ca0ad736870
--- /dev/null
+++ b/arch/arm/mach-bcmring/dma_device.c
@@ -0,0 +1,593 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*   @file   dma_device.c
+*
+*   @brief  private array of DMA_DeviceAttribute_t
+*/
+/****************************************************************************/
+
+DMA_DeviceAttribute_t DMA_gDeviceAttribute[DMA_NUM_DEVICE_ENTRIES] = {
+	[DMA_DEVICE_MEM_TO_MEM] =	/* MEM 2 MEM */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1,
+	 .name = "mem-to-mem",
+	 .config = {
+		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_MEM,
+		    .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+
+		    },
+	 },
+	[DMA_DEVICE_VPM_MEM_TO_MEM] =	/* VPM */
+	{
+	 .flags = DMA_DEVICE_FLAG_IS_DEDICATED | DMA_DEVICE_FLAG_NO_ISR,
+	 .name = "vpm",
+	 .dedicatedController = 0,
+	 .dedicatedChannel = 0,
+	 /* reserve DMA0:0 for VPM */
+	 },
+	[DMA_DEVICE_NAND_MEM_TO_MEM] =	/* NAND */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1,
+	 .name = "nand",
+	 .config = {
+		    .srcPeripheralPort = 0,
+		    .dstPeripheralPort = 0,
+		    .srcStatusRegisterAddress = 0x00000000,
+		    .dstStatusRegisterAddress = 0x00000000,
+		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_MEM,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_6,
+		    },
+	 },
+	[DMA_DEVICE_PIF_MEM_TO_DEV] =	/* PIF TX */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1
+	 | DMA_DEVICE_FLAG_ALLOW_LARGE_FIFO
+	 | DMA_DEVICE_FLAG_ALLOC_DMA1_FIRST | DMA_DEVICE_FLAG_PORT_PER_DMAC,
+	 .name = "pif_tx",
+	 .dmacPort = {14, 5},
+	 .config = {
+		    .srcPeripheralPort = 0,	/* SRC: memory */
+		    /* dstPeripheralPort          = 5 or 14 */
+		    .srcStatusRegisterAddress = 0x00000000,
+		    .dstStatusRegisterAddress = 0x00000000,
+		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
+		    .maxDataPerBlock = 16256,
+		    },
+	 },
+	[DMA_DEVICE_PIF_DEV_TO_MEM] =	/* PIF RX */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1
+	 | DMA_DEVICE_FLAG_ALLOW_LARGE_FIFO
+	 /* DMA_DEVICE_FLAG_ALLOC_DMA1_FIRST */
+	 | DMA_DEVICE_FLAG_PORT_PER_DMAC,
+	 .name = "pif_rx",
+	 .dmacPort = {14, 5},
+	 .config = {
+		    /* srcPeripheralPort          = 5 or 14 */
+		    .dstPeripheralPort = 0,	/* DST: memory */
+		    .srcStatusRegisterAddress = 0x00000000,
+		    .dstStatusRegisterAddress = 0x00000000,
+		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+		    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
+		    .maxDataPerBlock = 16256,
+		    },
+	 },
+	[DMA_DEVICE_I2S0_DEV_TO_MEM] =	/* I2S RX */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA0,
+	 .name = "i2s0_rx",
+	 .config = {
+		    .srcPeripheralPort = 0,	/* SRC: I2S0 */
+		    .dstPeripheralPort = 0,	/* DST: memory */
+		    .srcStatusRegisterAddress = 0,
+		    .dstStatusRegisterAddress = 0,
+		    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_16,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_0,
+		    .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
+		    },
+	 },
+	[DMA_DEVICE_I2S0_MEM_TO_DEV] =	/* I2S TX */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA0,
+	 .name = "i2s0_tx",
+	 .config = {
+		    .srcPeripheralPort = 0,	/* SRC: memory */
+		    .dstPeripheralPort = 1,	/* DST: I2S0 */
+		    .srcStatusRegisterAddress = 0,
+		    .dstStatusRegisterAddress = 0,
+		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_16,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_0,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+		    .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
+		    },
+	 },
+	[DMA_DEVICE_I2S1_DEV_TO_MEM] =	/* I2S1 RX */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA1,
+	 .name = "i2s1_rx",
+	 .config = {
+		    .srcPeripheralPort = 2,	/* SRC: I2S1 */
+		    .dstPeripheralPort = 0,	/* DST: memory */
+		    .srcStatusRegisterAddress = 0,
+		    .dstStatusRegisterAddress = 0,
+		    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_16,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_0,
+		    .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
+		    },
+	 },
+	[DMA_DEVICE_I2S1_MEM_TO_DEV] =	/* I2S1 TX */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA1,
+	 .name = "i2s1_tx",
+	 .config = {
+		    .srcPeripheralPort = 0,	/* SRC: memory */
+		    .dstPeripheralPort = 3,	/* DST: I2S1 */
+		    .srcStatusRegisterAddress = 0,
+		    .dstStatusRegisterAddress = 0,
+		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_16,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_0,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+		    .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
+		    },
+	 },
+	[DMA_DEVICE_ESW_MEM_TO_DEV] =	/* ESW TX */
+	{
+	 .name = "esw_tx",
+	 .flags = DMA_DEVICE_FLAG_IS_DEDICATED,
+	 .dedicatedController = 1,
+	 .dedicatedChannel = 3,
+	 .config = {
+		    .srcPeripheralPort = 0,	/* SRC: memory */
+		    .dstPeripheralPort = 1,	/* DST: ESW (MTP) */
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    /* DMAx_AHB_SSTATARy */
+		    .srcStatusRegisterAddress = 0x00000000,
+		    /* DMAx_AHB_DSTATARy */
+		    .dstStatusRegisterAddress = 0x30490010,
+		    /* DMAx_AHB_CFGy */
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    /* DMAx_AHB_CTLy */
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_0,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
+		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+		    },
+	 },
+	[DMA_DEVICE_ESW_DEV_TO_MEM] =	/* ESW RX */
+	{
+	 .name = "esw_rx",
+	 .flags = DMA_DEVICE_FLAG_IS_DEDICATED,
+	 .dedicatedController = 1,
+	 .dedicatedChannel = 2,
+	 .config = {
+		    .srcPeripheralPort = 0,	/* SRC: ESW (PTM) */
+		    .dstPeripheralPort = 0,	/* DST: memory */
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    /* DMAx_AHB_SSTATARy */
+		    .srcStatusRegisterAddress = 0x30480010,
+		    /* DMAx_AHB_DSTATARy */
+		    .dstStatusRegisterAddress = 0x00000000,
+		    /* DMAx_AHB_CFGy */
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    /* DMAx_AHB_CTLy */
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+		    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_0,
+		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+		    },
+	 },
+	[DMA_DEVICE_APM_CODEC_A_DEV_TO_MEM] =	/* APM Codec A Ingress */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA0,
+	 .name = "apm_a_rx",
+	 .config = {
+		    .srcPeripheralPort = 2,	/* SRC: Codec A Ingress FIFO */
+		    .dstPeripheralPort = 0,	/* DST: memory */
+		    .srcStatusRegisterAddress = 0x00000000,
+		    .dstStatusRegisterAddress = 0x00000000,
+		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+		    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+		    .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+		    .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
+		    },
+	 },
+	[DMA_DEVICE_APM_CODEC_A_MEM_TO_DEV] =	/* APM Codec A Egress */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA0,
+	 .name = "apm_a_tx",
+	 .config = {
+		    .srcPeripheralPort = 0,	/* SRC: memory */
+		    .dstPeripheralPort = 3,	/* DST: Codec A Egress FIFO */
+		    .srcStatusRegisterAddress = 0x00000000,
+		    .dstStatusRegisterAddress = 0x00000000,
+		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
+		    .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+		    .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
+		    },
+	 },
+	[DMA_DEVICE_APM_CODEC_B_DEV_TO_MEM] =	/* APM Codec B Ingress */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA0,
+	 .name = "apm_b_rx",
+	 .config = {
+		    .srcPeripheralPort = 4,	/* SRC: Codec B Ingress FIFO */
+		    .dstPeripheralPort = 0,	/* DST: memory */
+		    .srcStatusRegisterAddress = 0x00000000,
+		    .dstStatusRegisterAddress = 0x00000000,
+		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+		    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+		    .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+		    .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
+		    },
+	 },
+	[DMA_DEVICE_APM_CODEC_B_MEM_TO_DEV] =	/* APM Codec B Egress */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA0,
+	 .name = "apm_b_tx",
+	 .config = {
+		    .srcPeripheralPort = 0,	/* SRC: memory */
+		    .dstPeripheralPort = 5,	/* DST: Codec B Egress FIFO */
+		    .srcStatusRegisterAddress = 0x00000000,
+		    .dstStatusRegisterAddress = 0x00000000,
+		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
+		    .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+		    .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
+		    },
+	 },
+	[DMA_DEVICE_APM_CODEC_C_DEV_TO_MEM] =	/* APM Codec C Ingress */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA1,
+	 .name = "apm_c_rx",
+	 .config = {
+		    .srcPeripheralPort = 4,	/* SRC: Codec C Ingress FIFO */
+		    .dstPeripheralPort = 0,	/* DST: memory */
+		    .srcStatusRegisterAddress = 0x00000000,
+		    .dstStatusRegisterAddress = 0x00000000,
+		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+		    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+		    .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+		    .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
+		    },
+	 },
+	[DMA_DEVICE_APM_PCM0_DEV_TO_MEM] =	/* PCM0 RX */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA0,
+	 .name = "pcm0_rx",
+	 .config = {
+		    .srcPeripheralPort = 12,	/* SRC: PCM0 */
+		    .dstPeripheralPort = 0,	/* DST: memory */
+		    .srcStatusRegisterAddress = 0,
+		    .dstStatusRegisterAddress = 0,
+		    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+		    .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
+		    },
+	 },
+	[DMA_DEVICE_APM_PCM0_MEM_TO_DEV] =	/* PCM0 TX */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA0,
+	 .name = "pcm0_tx",
+	 .config = {
+		    .srcPeripheralPort = 0,	/* SRC: memory */
+		    .dstPeripheralPort = 13,	/* DST: PCM0 */
+		    .srcStatusRegisterAddress = 0,
+		    .dstStatusRegisterAddress = 0,
+		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
+		    .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
+		    },
+	 },
+	[DMA_DEVICE_APM_PCM1_DEV_TO_MEM] =	/* PCM1 RX */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA1,
+	 .name = "pcm1_rx",
+	 .config = {
+		    .srcPeripheralPort = 14,	/* SRC: PCM1 */
+		    .dstPeripheralPort = 0,	/* DST: memory */
+		    .srcStatusRegisterAddress = 0,
+		    .dstStatusRegisterAddress = 0,
+		    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4,
+		    .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS,
+		    },
+	 },
+	[DMA_DEVICE_APM_PCM1_MEM_TO_DEV] =	/* PCM1 TX */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA1,
+	 .name = "pcm1_tx",
+	 .config = {
+		    .srcPeripheralPort = 0,	/* SRC: memory */
+		    .dstPeripheralPort = 15,	/* DST: PCM1 */
+		    .srcStatusRegisterAddress = 0,
+		    .dstStatusRegisterAddress = 0,
+		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
+		    .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
+		    },
+	 },
+	[DMA_DEVICE_SPUM_DEV_TO_MEM] =	/* SPUM RX */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1,
+	 .name = "spum_rx",
+	 .config = {
+		    .srcPeripheralPort = 6,	/* SRC: Codec A Ingress FIFO */
+		    .dstPeripheralPort = 0,	/* DST: memory */
+		    .srcStatusRegisterAddress = 0x00000000,
+		    .dstStatusRegisterAddress = 0x00000000,
+		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+		    .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+		    .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
+		    /* Busrt size **MUST** be 16 for SPUM to work */
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_16,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_16,
+		    .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
+		    /* on the RX side, SPU needs to be the flow controller */
+		    .flowControler = dmacHw_FLOW_CONTROL_PERIPHERAL,
+		    },
+	 },
+	[DMA_DEVICE_SPUM_MEM_TO_DEV] =	/* SPUM TX */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1,
+	 .name = "spum_tx",
+	 .config = {
+		    .srcPeripheralPort = 0,	/* SRC: memory */
+		    .dstPeripheralPort = 7,	/* DST: SPUM */
+		    .srcStatusRegisterAddress = 0x00000000,
+		    .dstStatusRegisterAddress = 0x00000000,
+		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
+		    .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32,
+		    /* Busrt size **MUST** be 16 for SPUM to work */
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_16,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_16,
+		    .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST,
+		    },
+	 },
+	[DMA_DEVICE_MEM_TO_VRAM] =	/* MEM 2 VRAM */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1,
+	 .name = "mem-to-vram",
+	 .config = {
+		    .srcPeripheralPort = 0,	/* SRC: memory */
+		    .srcStatusRegisterAddress = 0x00000000,
+		    .dstStatusRegisterAddress = 0x00000000,
+		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_MEM,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
+		    },
+	 },
+	[DMA_DEVICE_VRAM_TO_MEM] =	/* VRAM 2 MEM */
+	{
+	 .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1,
+	 .name = "vram-to-mem",
+	 .config = {
+		    .dstPeripheralPort = 0,	/* DST: memory */
+		    .srcStatusRegisterAddress = 0x00000000,
+		    .dstStatusRegisterAddress = 0x00000000,
+		    .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC,
+		    .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC,
+		    .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_MEM,
+		    .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2,
+		    .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1,
+		    .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .errorInterrupt = dmacHw_INTERRUPT_ENABLE,
+		    .channelPriority = dmacHw_CHANNEL_PRIORITY_7,
+		    .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64,
+		    .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64,
+		    .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8,
+		    .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8,
+		    },
+	 },
+};
+EXPORT_SYMBOL(DMA_gDeviceAttribute);	/* primarily for dma-test.c */
diff --git a/arch/arm/mach-bcmring/include/mach/dma.h b/arch/arm/mach-bcmring/include/mach/dma.h
new file mode 100644
index 00000000000..847980c85c8
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/dma.h
@@ -0,0 +1,826 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*   @file   dma.h
+*
+*   @brief  API definitions for the linux DMA interface.
+*/
+/****************************************************************************/
+
+#if !defined(ASM_ARM_ARCH_BCMRING_DMA_H)
+#define ASM_ARM_ARCH_BCMRING_DMA_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <linux/kernel.h>
+#include <linux/wait.h>
+#include <linux/semaphore.h>
+#include <csp/dmacHw.h>
+#include <mach/timer.h>
+#include <linux/scatterlist.h>
+#include <linux/dma-mapping.h>
+#include <linux/mm.h>
+#include <linux/vmalloc.h>
+#include <linux/pagemap.h>
+
+/* ---- Constants and Types ---------------------------------------------- */
+
+/* If DMA_DEBUG_TRACK_RESERVATION is set to a non-zero value, then the filename */
+/* and line number of the reservation request will be recorded in the channel table */
+
+#define DMA_DEBUG_TRACK_RESERVATION   1
+
+#define DMA_NUM_CONTROLLERS     2
+#define DMA_NUM_CHANNELS        8	/* per controller */
+
+typedef enum {
+	DMA_DEVICE_MEM_TO_MEM,	/* For memory to memory transfers */
+	DMA_DEVICE_I2S0_DEV_TO_MEM,
+	DMA_DEVICE_I2S0_MEM_TO_DEV,
+	DMA_DEVICE_I2S1_DEV_TO_MEM,
+	DMA_DEVICE_I2S1_MEM_TO_DEV,
+	DMA_DEVICE_APM_CODEC_A_DEV_TO_MEM,
+	DMA_DEVICE_APM_CODEC_A_MEM_TO_DEV,
+	DMA_DEVICE_APM_CODEC_B_DEV_TO_MEM,
+	DMA_DEVICE_APM_CODEC_B_MEM_TO_DEV,
+	DMA_DEVICE_APM_CODEC_C_DEV_TO_MEM,	/* Additional mic input for beam-forming */
+	DMA_DEVICE_APM_PCM0_DEV_TO_MEM,
+	DMA_DEVICE_APM_PCM0_MEM_TO_DEV,
+	DMA_DEVICE_APM_PCM1_DEV_TO_MEM,
+	DMA_DEVICE_APM_PCM1_MEM_TO_DEV,
+	DMA_DEVICE_SPUM_DEV_TO_MEM,
+	DMA_DEVICE_SPUM_MEM_TO_DEV,
+	DMA_DEVICE_SPIH_DEV_TO_MEM,
+	DMA_DEVICE_SPIH_MEM_TO_DEV,
+	DMA_DEVICE_UART_A_DEV_TO_MEM,
+	DMA_DEVICE_UART_A_MEM_TO_DEV,
+	DMA_DEVICE_UART_B_DEV_TO_MEM,
+	DMA_DEVICE_UART_B_MEM_TO_DEV,
+	DMA_DEVICE_PIF_MEM_TO_DEV,
+	DMA_DEVICE_PIF_DEV_TO_MEM,
+	DMA_DEVICE_ESW_DEV_TO_MEM,
+	DMA_DEVICE_ESW_MEM_TO_DEV,
+	DMA_DEVICE_VPM_MEM_TO_MEM,
+	DMA_DEVICE_CLCD_MEM_TO_MEM,
+	DMA_DEVICE_NAND_MEM_TO_MEM,
+	DMA_DEVICE_MEM_TO_VRAM,
+	DMA_DEVICE_VRAM_TO_MEM,
+
+	/* Add new entries before this line. */
+
+	DMA_NUM_DEVICE_ENTRIES,
+	DMA_DEVICE_NONE = 0xff,	/* Special value to indicate that no device is currently assigned. */
+
+} DMA_Device_t;
+
+/****************************************************************************
+*
+*   The DMA_Handle_t is the primary object used by callers of the API.
+*
+*****************************************************************************/
+
+#define DMA_INVALID_HANDLE  ((DMA_Handle_t) -1)
+
+typedef int DMA_Handle_t;
+
+/****************************************************************************
+*
+*   The DMA_DescriptorRing_t contains a ring of descriptors which is used
+*   to point to regions of memory.
+*
+*****************************************************************************/
+
+typedef struct {
+	void *virtAddr;		/* Virtual Address of the descriptor ring */
+	dma_addr_t physAddr;	/* Physical address of the descriptor ring */
+	int descriptorsAllocated;	/* Number of descriptors allocated in the descriptor ring */
+	size_t bytesAllocated;	/* Number of bytes allocated in the descriptor ring */
+
+} DMA_DescriptorRing_t;
+
+/****************************************************************************
+*
+*   The DMA_MemType_t and DMA_MemMap_t are helper structures used to setup
+*   DMA chains from a variety of memory sources.
+*
+*****************************************************************************/
+
+#define DMA_MEM_MAP_MIN_SIZE    4096	/* Pages less than this size are better */
+					/* off not being DMA'd. */
+
+typedef enum {
+	DMA_MEM_TYPE_NONE,	/* Not a valid setting */
+	DMA_MEM_TYPE_VMALLOC,	/* Memory came from vmalloc call */
+	DMA_MEM_TYPE_KMALLOC,	/* Memory came from kmalloc call */
+	DMA_MEM_TYPE_DMA,	/* Memory came from dma_alloc_xxx call */
+	DMA_MEM_TYPE_USER,	/* Memory came from user space. */
+
+} DMA_MemType_t;
+
+/* A segment represents a physically and virtually contiguous chunk of memory. */
+/* i.e. each segment can be DMA'd */
+/* A user of the DMA code will add memory regions. Each region may need to be */
+/* represented by one or more segments. */
+
+typedef struct {
+	void *virtAddr;		/* Virtual address used for this segment */
+	dma_addr_t physAddr;	/* Physical address this segment maps to */
+	size_t numBytes;	/* Size of the segment, in bytes */
+
+} DMA_Segment_t;
+
+/* A region represents a virtually contiguous chunk of memory, which may be */
+/* made up of multiple segments. */
+
+typedef struct {
+	DMA_MemType_t memType;
+	void *virtAddr;
+	size_t numBytes;
+
+	/* Each region (virtually contiguous) consists of one or more segments. Each */
+	/* segment is virtually and physically contiguous. */
+
+	int numSegmentsUsed;
+	int numSegmentsAllocated;
+	DMA_Segment_t *segment;
+
+	/* When a region corresponds to user memory, we need to lock all of the pages */
+	/* down before we can figure out the physical addresses. The lockedPage array contains */
+	/* the pages that were locked, and which subsequently need to be unlocked once the */
+	/* memory is unmapped. */
+
+	unsigned numLockedPages;
+	struct page **lockedPages;
+
+} DMA_Region_t;
+
+typedef struct {
+	int inUse;		/* Is this mapping currently being used? */
+	struct semaphore lock;	/* Acquired when using this structure */
+	enum dma_data_direction dir;	/* Direction this transfer is intended for */
+
+	/* In the event that we're mapping user memory, we need to know which task */
+	/* the memory is for, so that we can obtain the correct mm locks. */
+
+	struct task_struct *userTask;
+
+	int numRegionsUsed;
+	int numRegionsAllocated;
+	DMA_Region_t *region;
+
+} DMA_MemMap_t;
+
+/****************************************************************************
+*
+*   The DMA_DeviceAttribute_t contains information which describes a
+*   particular DMA device (or peripheral).
+*
+*   It is anticipated that the arrary of DMA_DeviceAttribute_t's will be
+*   statically initialized.
+*
+*****************************************************************************/
+
+/* The device handler is called whenever a DMA operation completes. The reaon */
+/* for it to be called will be a bitmask with one or more of the following bits */
+/* set. */
+
+#define DMA_HANDLER_REASON_BLOCK_COMPLETE       dmacHw_INTERRUPT_STATUS_BLOCK
+#define DMA_HANDLER_REASON_TRANSFER_COMPLETE    dmacHw_INTERRUPT_STATUS_TRANS
+#define DMA_HANDLER_REASON_ERROR                dmacHw_INTERRUPT_STATUS_ERROR
+
+typedef void (*DMA_DeviceHandler_t) (DMA_Device_t dev, int reason,
+				     void *userData);
+
+#define DMA_DEVICE_FLAG_ON_DMA0             0x00000001
+#define DMA_DEVICE_FLAG_ON_DMA1             0x00000002
+#define DMA_DEVICE_FLAG_PORT_PER_DMAC       0x00000004	/* If set, it means that the port used on DMAC0 is different from the port used on DMAC1 */
+#define DMA_DEVICE_FLAG_ALLOC_DMA1_FIRST    0x00000008	/* If set, allocate from DMA1 before allocating from DMA0 */
+#define DMA_DEVICE_FLAG_IS_DEDICATED        0x00000100
+#define DMA_DEVICE_FLAG_NO_ISR              0x00000200
+#define DMA_DEVICE_FLAG_ALLOW_LARGE_FIFO    0x00000400
+#define DMA_DEVICE_FLAG_IN_USE              0x00000800	/* If set, device is in use on a channel */
+
+/* Note: Some DMA devices can be used from multiple DMA Controllers. The bitmask is used to */
+/*       determine which DMA controllers a given device can be used from, and the interface */
+/*       array determeines the actual interface number to use for a given controller. */
+
+typedef struct {
+	uint32_t flags;		/* Bitmask of DMA_DEVICE_FLAG_xxx constants */
+	uint8_t dedicatedController;	/* Controller number to use if DMA_DEVICE_FLAG_IS_DEDICATED is set. */
+	uint8_t dedicatedChannel;	/* Channel number to use if DMA_DEVICE_FLAG_IS_DEDICATED is set. */
+	const char *name;	/* Will show up in the /proc entry */
+
+	uint32_t dmacPort[DMA_NUM_CONTROLLERS];	/* Specifies the port number when DMA_DEVICE_FLAG_PORT_PER_DMAC flag is set */
+
+	dmacHw_CONFIG_t config;	/* Configuration to use when DMA'ing using this device */
+
+	void *userData;		/* Passed to the devHandler */
+	DMA_DeviceHandler_t devHandler;	/* Called when DMA operations finish. */
+
+	timer_tick_count_t transferStartTime;	/* Time the current transfer was started */
+
+	/* The following statistical information will be collected and presented in a proc entry. */
+	/* Note: With a contiuous bandwidth of 1 Gb/sec, it would take 584 years to overflow */
+	/*       a 64 bit counter. */
+
+	uint64_t numTransfers;	/* Number of DMA transfers performed */
+	uint64_t transferTicks;	/* Total time spent doing DMA transfers (measured in timer_tick_count_t's) */
+	uint64_t transferBytes;	/* Total bytes transferred */
+	uint32_t timesBlocked;	/* Number of times a channel was unavailable */
+	uint32_t numBytes;	/* Last transfer size */
+
+	/* It's not possible to free memory which is allocated for the descriptors from within */
+	/* the ISR. So make the presumption that a given device will tend to use the */
+	/* same sized buffers over and over again, and we keep them around. */
+
+	DMA_DescriptorRing_t ring;	/* Ring of descriptors allocated for this device */
+
+	/* We stash away some of the information from the previous transfer. If back-to-back */
+	/* transfers are performed from the same buffer, then we don't have to keep re-initializing */
+	/* the descriptor buffers. */
+
+	uint32_t prevNumBytes;
+	dma_addr_t prevSrcData;
+	dma_addr_t prevDstData;
+
+} DMA_DeviceAttribute_t;
+
+/****************************************************************************
+*
+*   DMA_Channel_t, DMA_Controller_t, and DMA_State_t are really internal
+*   data structures and don't belong in this header file, but are included
+*   merely for discussion.
+*
+*   By the time this is implemented, these structures will be moved out into
+*   the appropriate C source file instead.
+*
+*****************************************************************************/
+
+/****************************************************************************
+*
+*   The DMA_Channel_t contains state information about each DMA channel. Some
+*   of the channels are dedicated. Non-dedicated channels are shared
+*   amongst the other devices.
+*
+*****************************************************************************/
+
+#define DMA_CHANNEL_FLAG_IN_USE         0x00000001
+#define DMA_CHANNEL_FLAG_IS_DEDICATED   0x00000002
+#define DMA_CHANNEL_FLAG_NO_ISR         0x00000004
+#define DMA_CHANNEL_FLAG_LARGE_FIFO     0x00000008
+
+typedef struct {
+	uint32_t flags;		/* bitmask of DMA_CHANNEL_FLAG_xxx constants */
+	DMA_Device_t devType;	/* Device this channel is currently reserved for */
+	DMA_Device_t lastDevType;	/* Device type that used this previously */
+	char name[20];		/* Name passed onto request_irq */
+
+#if (DMA_DEBUG_TRACK_RESERVATION)
+	const char *fileName;	/* Place where channel reservation took place */
+	int lineNum;		/* Place where channel reservation took place */
+#endif
+	dmacHw_HANDLE_t dmacHwHandle;	/* low level channel handle. */
+
+} DMA_Channel_t;
+
+/****************************************************************************
+*
+*   The DMA_Controller_t contains state information about each DMA controller.
+*
+*   The freeChannelQ is stored in the controller data structure rather than
+*   the channel data structure since several of the devices are accessible
+*   from multiple controllers, and there is no way to know which controller
+*   will become available first.
+*
+*****************************************************************************/
+
+typedef struct {
+	DMA_Channel_t channel[DMA_NUM_CHANNELS];
+
+} DMA_Controller_t;
+
+/****************************************************************************
+*
+*   The DMA_Global_t contains all of the global state information used by
+*   the DMA code.
+*
+*   Callers which need to allocate a shared channel will be queued up
+*   on the freeChannelQ until a channel becomes available.
+*
+*****************************************************************************/
+
+typedef struct {
+	struct semaphore lock;	/* acquired when manipulating table entries */
+	wait_queue_head_t freeChannelQ;
+
+	DMA_Controller_t controller[DMA_NUM_CONTROLLERS];
+
+} DMA_Global_t;
+
+/* ---- Variable Externs ------------------------------------------------- */
+
+extern DMA_DeviceAttribute_t DMA_gDeviceAttribute[DMA_NUM_DEVICE_ENTRIES];
+
+/* ---- Function Prototypes ---------------------------------------------- */
+
+#if defined(__KERNEL__)
+
+/****************************************************************************/
+/**
+*   Initializes the DMA module.
+*
+*   @return
+*       0       - Success
+*       < 0     - Error
+*/
+/****************************************************************************/
+
+int dma_init(void);
+
+#if (DMA_DEBUG_TRACK_RESERVATION)
+DMA_Handle_t dma_request_channel_dbg(DMA_Device_t dev, const char *fileName,
+				     int lineNum);
+#define dma_request_channel(dev)  dma_request_channel_dbg(dev, __FILE__, __LINE__)
+#else
+
+/****************************************************************************/
+/**
+*   Reserves a channel for use with @a dev. If the device is setup to use
+*   a shared channel, then this function will block until a free channel
+*   becomes available.
+*
+*   @return
+*       >= 0    - A valid DMA Handle.
+*       -EBUSY  - Device is currently being used.
+*       -ENODEV - Device handed in is invalid.
+*/
+/****************************************************************************/
+
+DMA_Handle_t dma_request_channel(DMA_Device_t dev	/* Device to use with the allocated channel. */
+    );
+#endif
+
+/****************************************************************************/
+/**
+*   Frees a previously allocated DMA Handle.
+*
+*   @return
+*        0      - DMA Handle was released successfully.
+*       -EINVAL - Invalid DMA handle
+*/
+/****************************************************************************/
+
+int dma_free_channel(DMA_Handle_t channel	/* DMA handle. */
+    );
+
+/****************************************************************************/
+/**
+*   Determines if a given device has been configured as using a shared
+*   channel.
+*
+*   @return boolean
+*       0           Device uses a dedicated channel
+*       non-zero    Device uses a shared channel
+*/
+/****************************************************************************/
+
+int dma_device_is_channel_shared(DMA_Device_t dev	/* Device to check. */
+    );
+
+/****************************************************************************/
+/**
+*   Allocates memory to hold a descriptor ring. The descriptor ring then
+*   needs to be populated by making one or more calls to
+*   dna_add_descriptors.
+*
+*   The returned descriptor ring will be automatically initialized.
+*
+*   @return
+*       0           Descriptor ring was allocated successfully
+*       -ENOMEM     Unable to allocate memory for the desired number of descriptors.
+*/
+/****************************************************************************/
+
+int dma_alloc_descriptor_ring(DMA_DescriptorRing_t *ring,	/* Descriptor ring to populate */
+			      int numDescriptors	/* Number of descriptors that need to be allocated. */
+    );
+
+/****************************************************************************/
+/**
+*   Releases the memory which was previously allocated for a descriptor ring.
+*/
+/****************************************************************************/
+
+void dma_free_descriptor_ring(DMA_DescriptorRing_t *ring	/* Descriptor to release */
+    );
+
+/****************************************************************************/
+/**
+*   Initializes a descriptor ring, so that descriptors can be added to it.
+*   Once a descriptor ring has been allocated, it may be reinitialized for
+*   use with additional/different regions of memory.
+*
+*   Note that if 7 descriptors are allocated, it's perfectly acceptable to
+*   initialize the ring with a smaller number of descriptors. The amount
+*   of memory allocated for the descriptor ring will not be reduced, and
+*   the descriptor ring may be reinitialized later
+*
+*   @return
+*       0           Descriptor ring was initialized successfully
+*       -ENOMEM     The descriptor which was passed in has insufficient space
+*                   to hold the desired number of descriptors.
+*/
+/****************************************************************************/
+
+int dma_init_descriptor_ring(DMA_DescriptorRing_t *ring,	/* Descriptor ring to initialize */
+			     int numDescriptors	/* Number of descriptors to initialize. */
+    );
+
+/****************************************************************************/
+/**
+*   Determines the number of descriptors which would be required for a
+*   transfer of the indicated memory region.
+*
+*   This function also needs to know which DMA device this transfer will
+*   be destined for, so that the appropriate DMA configuration can be retrieved.
+*   DMA parameters such as transfer width, and whether this is a memory-to-memory
+*   or memory-to-peripheral, etc can all affect the actual number of descriptors
+*   required.
+*
+*   @return
+*       > 0     Returns the number of descriptors required for the indicated transfer
+*       -EINVAL Invalid device type for this kind of transfer
+*               (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
+*       -ENOMEM Memory exhausted
+*/
+/****************************************************************************/
+
+int dma_calculate_descriptor_count(DMA_Device_t device,	/* DMA Device that this will be associated with */
+				   dma_addr_t srcData,	/* Place to get data to write to device */
+				   dma_addr_t dstData,	/* Pointer to device data address */
+				   size_t numBytes	/* Number of bytes to transfer to the device */
+    );
+
+/****************************************************************************/
+/**
+*   Adds a region of memory to the descriptor ring. Note that it may take
+*   multiple descriptors for each region of memory. It is the callers
+*   responsibility to allocate a sufficiently large descriptor ring.
+*
+*   @return
+*       0       Descriptors were added successfully
+*       -EINVAL Invalid device type for this kind of transfer
+*               (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
+*       -ENOMEM Memory exhausted
+*/
+/****************************************************************************/
+
+int dma_add_descriptors(DMA_DescriptorRing_t *ring,	/* Descriptor ring to add descriptors to */
+			DMA_Device_t device,	/* DMA Device that descriptors are for */
+			dma_addr_t srcData,	/* Place to get data (memory or device) */
+			dma_addr_t dstData,	/* Place to put data (memory or device) */
+			size_t numBytes	/* Number of bytes to transfer to the device */
+    );
+
+/****************************************************************************/
+/**
+*   Sets the descriptor ring associated with a device.
+*
+*   Once set, the descriptor ring will be associated with the device, even
+*   across channel request/free calls. Passing in a NULL descriptor ring
+*   will release any descriptor ring currently associated with the device.
+*
+*   Note: If you call dma_transfer, or one of the other dma_alloc_ functions
+*         the descriptor ring may be released and reallocated.
+*
+*   Note: This function will release the descriptor memory for any current
+*         descriptor ring associated with this device.
+*/
+/****************************************************************************/
+
+int dma_set_device_descriptor_ring(DMA_Device_t device,	/* Device to update the descriptor ring for. */
+				   DMA_DescriptorRing_t *ring	/* Descriptor ring to add descriptors to */
+    );
+
+/****************************************************************************/
+/**
+*   Retrieves the descriptor ring associated with a device.
+*/
+/****************************************************************************/
+
+int dma_get_device_descriptor_ring(DMA_Device_t device,	/* Device to retrieve the descriptor ring for. */
+				   DMA_DescriptorRing_t *ring	/* Place to store retrieved ring */
+    );
+
+/****************************************************************************/
+/**
+*   Allocates buffers for the descriptors. This is normally done automatically
+*   but needs to be done explicitly when initiating a dma from interrupt
+*   context.
+*
+*   @return
+*       0       Descriptors were allocated successfully
+*       -EINVAL Invalid device type for this kind of transfer
+*               (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
+*       -ENOMEM Memory exhausted
+*/
+/****************************************************************************/
+
+int dma_alloc_descriptors(DMA_Handle_t handle,	/* DMA Handle */
+			  dmacHw_TRANSFER_TYPE_e transferType,	/* Type of transfer being performed */
+			  dma_addr_t srcData,	/* Place to get data to write to device */
+			  dma_addr_t dstData,	/* Pointer to device data address */
+			  size_t numBytes	/* Number of bytes to transfer to the device */
+    );
+
+/****************************************************************************/
+/**
+*   Allocates and sets up descriptors for a double buffered circular buffer.
+*
+*   This is primarily intended to be used for things like the ingress samples
+*   from a microphone.
+*
+*   @return
+*       > 0     Number of descriptors actually allocated.
+*       -EINVAL Invalid device type for this kind of transfer
+*               (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
+*       -ENOMEM Memory exhausted
+*/
+/****************************************************************************/
+
+int dma_alloc_double_dst_descriptors(DMA_Handle_t handle,	/* DMA Handle */
+				     dma_addr_t srcData,	/* Physical address of source data */
+				     dma_addr_t dstData1,	/* Physical address of first destination buffer */
+				     dma_addr_t dstData2,	/* Physical address of second destination buffer */
+				     size_t numBytes	/* Number of bytes in each destination buffer */
+    );
+
+/****************************************************************************/
+/**
+*   Initializes a DMA_MemMap_t data structure
+*/
+/****************************************************************************/
+
+int dma_init_mem_map(DMA_MemMap_t *memMap	/* Stores state information about the map */
+    );
+
+/****************************************************************************/
+/**
+*   Releases any memory currently being held by a memory mapping structure.
+*/
+/****************************************************************************/
+
+int dma_term_mem_map(DMA_MemMap_t *memMap	/* Stores state information about the map */
+    );
+
+/****************************************************************************/
+/**
+*   Looks at a memory address and categorizes it.
+*
+*   @return One of the values from the DMA_MemType_t enumeration.
+*/
+/****************************************************************************/
+
+DMA_MemType_t dma_mem_type(void *addr);
+
+/****************************************************************************/
+/**
+*   Sets the process (aka userTask) associated with a mem map. This is
+*   required if user-mode segments will be added to the mapping.
+*/
+/****************************************************************************/
+
+static inline void dma_mem_map_set_user_task(DMA_MemMap_t *memMap,
+					     struct task_struct *task)
+{
+	memMap->userTask = task;
+}
+
+/****************************************************************************/
+/**
+*   Looks at a memory address and determines if we support DMA'ing to/from
+*   that type of memory.
+*
+*   @return boolean -
+*               return value != 0 means dma supported
+*               return value == 0 means dma not supported
+*/
+/****************************************************************************/
+
+int dma_mem_supports_dma(void *addr);
+
+/****************************************************************************/
+/**
+*   Initializes a memory map for use. Since this function acquires a
+*   sempaphore within the memory map, it is VERY important that dma_unmap
+*   be called when you're finished using the map.
+*/
+/****************************************************************************/
+
+int dma_map_start(DMA_MemMap_t *memMap,	/* Stores state information about the map */
+		  enum dma_data_direction dir	/* Direction that the mapping will be going */
+    );
+
+/****************************************************************************/
+/**
+*   Adds a segment of memory to a memory map.
+*
+*   @return     0 on success, error code otherwise.
+*/
+/****************************************************************************/
+
+int dma_map_add_region(DMA_MemMap_t *memMap,	/* Stores state information about the map */
+		       void *mem,	/* Virtual address that we want to get a map of */
+		       size_t numBytes	/* Number of bytes being mapped */
+    );
+
+/****************************************************************************/
+/**
+*   Creates a descriptor ring from a memory mapping.
+*
+*   @return 0 on sucess, error code otherwise.
+*/
+/****************************************************************************/
+
+int dma_map_create_descriptor_ring(DMA_Device_t dev,	/* DMA device (where the ring is stored) */
+				   DMA_MemMap_t *memMap,	/* Memory map that will be used */
+				   dma_addr_t devPhysAddr	/* Physical address of device */
+    );
+
+/****************************************************************************/
+/**
+*   Maps in a memory region such that it can be used for performing a DMA.
+*
+*   @return
+*/
+/****************************************************************************/
+
+int dma_map_mem(DMA_MemMap_t *memMap,	/* Stores state information about the map */
+		void *addr,	/* Virtual address that we want to get a map of */
+		size_t count,	/* Number of bytes being mapped */
+		enum dma_data_direction dir	/* Direction that the mapping will be going */
+    );
+
+/****************************************************************************/
+/**
+*   Maps in a memory region such that it can be used for performing a DMA.
+*
+*   @return
+*/
+/****************************************************************************/
+
+int dma_unmap(DMA_MemMap_t *memMap,	/* Stores state information about the map */
+	      int dirtied	/* non-zero if any of the pages were modified */
+    );
+
+/****************************************************************************/
+/**
+*   Initiates a transfer when the descriptors have already been setup.
+*
+*   This is a special case, and normally, the dma_transfer_xxx functions should
+*   be used.
+*
+*   @return
+*       0       Transfer was started successfully
+*       -ENODEV Invalid handle
+*/
+/****************************************************************************/
+
+int dma_start_transfer(DMA_Handle_t handle);
+
+/****************************************************************************/
+/**
+*   Stops a previously started DMA transfer.
+*
+*   @return
+*       0       Transfer was stopped successfully
+*       -ENODEV Invalid handle
+*/
+/****************************************************************************/
+
+int dma_stop_transfer(DMA_Handle_t handle);
+
+/****************************************************************************/
+/**
+*   Waits for a DMA to complete by polling. This function is only intended
+*   to be used for testing. Interrupts should be used for most DMA operations.
+*/
+/****************************************************************************/
+
+int dma_wait_transfer_done(DMA_Handle_t handle);
+
+/****************************************************************************/
+/**
+*   Initiates a DMA transfer
+*
+*   @return
+*       0       Transfer was started successfully
+*       -EINVAL Invalid device type for this kind of transfer
+*               (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
+*/
+/****************************************************************************/
+
+int dma_transfer(DMA_Handle_t handle,	/* DMA Handle */
+		 dmacHw_TRANSFER_TYPE_e transferType,	/* Type of transfer being performed */
+		 dma_addr_t srcData,	/* Place to get data to write to device */
+		 dma_addr_t dstData,	/* Pointer to device data address */
+		 size_t numBytes	/* Number of bytes to transfer to the device */
+    );
+
+/****************************************************************************/
+/**
+*   Initiates a transfer from memory to a device.
+*
+*   @return
+*       0       Transfer was started successfully
+*       -EINVAL Invalid device type for this kind of transfer
+*               (i.e. the device is _DEV_TO_MEM and not _MEM_TO_DEV)
+*/
+/****************************************************************************/
+
+static inline int dma_transfer_to_device(DMA_Handle_t handle,	/* DMA Handle */
+					 dma_addr_t srcData,	/* Place to get data to write to device (physical address) */
+					 dma_addr_t dstData,	/* Pointer to device data address (physical address) */
+					 size_t numBytes	/* Number of bytes to transfer to the device */
+    ) {
+	return dma_transfer(handle,
+			    dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL,
+			    srcData, dstData, numBytes);
+}
+
+/****************************************************************************/
+/**
+*   Initiates a transfer from a device to memory.
+*
+*   @return
+*       0       Transfer was started successfully
+*       -EINVAL Invalid device type for this kind of transfer
+*               (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
+*/
+/****************************************************************************/
+
+static inline int dma_transfer_from_device(DMA_Handle_t handle,	/* DMA Handle */
+					   dma_addr_t srcData,	/* Pointer to the device data address (physical address) */
+					   dma_addr_t dstData,	/* Place to store data retrieved from the device (physical address) */
+					   size_t numBytes	/* Number of bytes to retrieve from the device */
+    ) {
+	return dma_transfer(handle,
+			    dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM,
+			    srcData, dstData, numBytes);
+}
+
+/****************************************************************************/
+/**
+*   Initiates a memory to memory transfer.
+*
+*   @return
+*       0       Transfer was started successfully
+*       -EINVAL Invalid device type for this kind of transfer
+*               (i.e. the device wasn't DMA_DEVICE_MEM_TO_MEM)
+*/
+/****************************************************************************/
+
+static inline int dma_transfer_mem_to_mem(DMA_Handle_t handle,	/* DMA Handle */
+					  dma_addr_t srcData,	/* Place to transfer data from (physical address) */
+					  dma_addr_t dstData,	/* Place to transfer data to (physical address) */
+					  size_t numBytes	/* Number of bytes to transfer */
+    ) {
+	return dma_transfer(handle,
+			    dmacHw_TRANSFER_TYPE_MEM_TO_MEM,
+			    srcData, dstData, numBytes);
+}
+
+/****************************************************************************/
+/**
+*   Set the callback function which will be called when a transfer completes.
+*   If a NULL callback function is set, then no callback will occur.
+*
+*   @note   @a devHandler will be called from IRQ context.
+*
+*   @return
+*       0       - Success
+*       -ENODEV - Device handed in is invalid.
+*/
+/****************************************************************************/
+
+int dma_set_device_handler(DMA_Device_t dev,	/* Device to set the callback for. */
+			   DMA_DeviceHandler_t devHandler,	/* Function to call when the DMA completes */
+			   void *userData	/* Pointer which will be passed to devHandler. */
+    );
+
+#endif
+
+#endif /* ASM_ARM_ARCH_BCMRING_DMA_H */
-- 
cgit v1.2.3


From 859277f7dbf8b48016d55ea2171d04eed074d858 Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Fri, 7 Aug 2009 20:01:13 +0100
Subject: ARM: 5648/1: bcmring: add bmcring dma.c

implement dma support for bcmring

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-bcmring/dma.c | 2321 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 2321 insertions(+)
 create mode 100644 arch/arm/mach-bcmring/dma.c

(limited to 'arch')

diff --git a/arch/arm/mach-bcmring/dma.c b/arch/arm/mach-bcmring/dma.c
new file mode 100644
index 00000000000..7b20fccb9d4
--- /dev/null
+++ b/arch/arm/mach-bcmring/dma.c
@@ -0,0 +1,2321 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*   @file   dma.c
+*
+*   @brief  Implements the DMA interface.
+*/
+/****************************************************************************/
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/irqreturn.h>
+#include <linux/proc_fs.h>
+
+#include <mach/timer.h>
+
+#include <linux/mm.h>
+#include <linux/pfn.h>
+#include <asm/atomic.h>
+#include <mach/dma.h>
+
+/* I don't quite understand why dc4 fails when this is set to 1 and DMA is enabled */
+/* especially since dc4 doesn't use kmalloc'd memory. */
+
+#define ALLOW_MAP_OF_KMALLOC_MEMORY 0
+
+/* ---- Public Variables ------------------------------------------------- */
+
+/* ---- Private Constants and Types -------------------------------------- */
+
+#define MAKE_HANDLE(controllerIdx, channelIdx)    (((controllerIdx) << 4) | (channelIdx))
+
+#define CONTROLLER_FROM_HANDLE(handle)    (((handle) >> 4) & 0x0f)
+#define CHANNEL_FROM_HANDLE(handle)       ((handle) & 0x0f)
+
+#define DMA_MAP_DEBUG   0
+
+#if DMA_MAP_DEBUG
+#   define  DMA_MAP_PRINT(fmt, args...)   printk("%s: " fmt, __func__,  ## args)
+#else
+#   define  DMA_MAP_PRINT(fmt, args...)
+#endif
+
+/* ---- Private Variables ------------------------------------------------ */
+
+static DMA_Global_t gDMA;
+static struct proc_dir_entry *gDmaDir;
+
+static atomic_t gDmaStatMemTypeKmalloc = ATOMIC_INIT(0);
+static atomic_t gDmaStatMemTypeVmalloc = ATOMIC_INIT(0);
+static atomic_t gDmaStatMemTypeUser = ATOMIC_INIT(0);
+static atomic_t gDmaStatMemTypeCoherent = ATOMIC_INIT(0);
+
+#include "dma_device.c"
+
+/* ---- Private Function Prototypes -------------------------------------- */
+
+/* ---- Functions  ------------------------------------------------------- */
+
+/****************************************************************************/
+/**
+*   Displays information for /proc/dma/mem-type
+*/
+/****************************************************************************/
+
+static int dma_proc_read_mem_type(char *buf, char **start, off_t offset,
+				  int count, int *eof, void *data)
+{
+	int len = 0;
+
+	len += sprintf(buf + len, "dma_map_mem statistics\n");
+	len +=
+	    sprintf(buf + len, "coherent: %d\n",
+		    atomic_read(&gDmaStatMemTypeCoherent));
+	len +=
+	    sprintf(buf + len, "kmalloc:  %d\n",
+		    atomic_read(&gDmaStatMemTypeKmalloc));
+	len +=
+	    sprintf(buf + len, "vmalloc:  %d\n",
+		    atomic_read(&gDmaStatMemTypeVmalloc));
+	len +=
+	    sprintf(buf + len, "user:     %d\n",
+		    atomic_read(&gDmaStatMemTypeUser));
+
+	return len;
+}
+
+/****************************************************************************/
+/**
+*   Displays information for /proc/dma/channels
+*/
+/****************************************************************************/
+
+static int dma_proc_read_channels(char *buf, char **start, off_t offset,
+				  int count, int *eof, void *data)
+{
+	int controllerIdx;
+	int channelIdx;
+	int limit = count - 200;
+	int len = 0;
+	DMA_Channel_t *channel;
+
+	if (down_interruptible(&gDMA.lock) < 0) {
+		return -ERESTARTSYS;
+	}
+
+	for (controllerIdx = 0; controllerIdx < DMA_NUM_CONTROLLERS;
+	     controllerIdx++) {
+		for (channelIdx = 0; channelIdx < DMA_NUM_CHANNELS;
+		     channelIdx++) {
+			if (len >= limit) {
+				break;
+			}
+
+			channel =
+			    &gDMA.controller[controllerIdx].channel[channelIdx];
+
+			len +=
+			    sprintf(buf + len, "%d:%d ", controllerIdx,
+				    channelIdx);
+
+			if ((channel->flags & DMA_CHANNEL_FLAG_IS_DEDICATED) !=
+			    0) {
+				len +=
+				    sprintf(buf + len, "Dedicated for %s ",
+					    DMA_gDeviceAttribute[channel->
+								 devType].name);
+			} else {
+				len += sprintf(buf + len, "Shared ");
+			}
+
+			if ((channel->flags & DMA_CHANNEL_FLAG_NO_ISR) != 0) {
+				len += sprintf(buf + len, "No ISR ");
+			}
+
+			if ((channel->flags & DMA_CHANNEL_FLAG_LARGE_FIFO) != 0) {
+				len += sprintf(buf + len, "Fifo: 128 ");
+			} else {
+				len += sprintf(buf + len, "Fifo: 64  ");
+			}
+
+			if ((channel->flags & DMA_CHANNEL_FLAG_IN_USE) != 0) {
+				len +=
+				    sprintf(buf + len, "InUse by %s",
+					    DMA_gDeviceAttribute[channel->
+								 devType].name);
+#if (DMA_DEBUG_TRACK_RESERVATION)
+				len +=
+				    sprintf(buf + len, " (%s:%d)",
+					    channel->fileName,
+					    channel->lineNum);
+#endif
+			} else {
+				len += sprintf(buf + len, "Avail ");
+			}
+
+			if (channel->lastDevType != DMA_DEVICE_NONE) {
+				len +=
+				    sprintf(buf + len, "Last use: %s ",
+					    DMA_gDeviceAttribute[channel->
+								 lastDevType].
+					    name);
+			}
+
+			len += sprintf(buf + len, "\n");
+		}
+	}
+	up(&gDMA.lock);
+	*eof = 1;
+
+	return len;
+}
+
+/****************************************************************************/
+/**
+*   Displays information for /proc/dma/devices
+*/
+/****************************************************************************/
+
+static int dma_proc_read_devices(char *buf, char **start, off_t offset,
+				 int count, int *eof, void *data)
+{
+	int limit = count - 200;
+	int len = 0;
+	int devIdx;
+
+	if (down_interruptible(&gDMA.lock) < 0) {
+		return -ERESTARTSYS;
+	}
+
+	for (devIdx = 0; devIdx < DMA_NUM_DEVICE_ENTRIES; devIdx++) {
+		DMA_DeviceAttribute_t *devAttr = &DMA_gDeviceAttribute[devIdx];
+
+		if (devAttr->name == NULL) {
+			continue;
+		}
+
+		if (len >= limit) {
+			break;
+		}
+
+		len += sprintf(buf + len, "%-12s ", devAttr->name);
+
+		if ((devAttr->flags & DMA_DEVICE_FLAG_IS_DEDICATED) != 0) {
+			len +=
+			    sprintf(buf + len, "Dedicated %d:%d ",
+				    devAttr->dedicatedController,
+				    devAttr->dedicatedChannel);
+		} else {
+			len += sprintf(buf + len, "Shared DMA:");
+			if ((devAttr->flags & DMA_DEVICE_FLAG_ON_DMA0) != 0) {
+				len += sprintf(buf + len, "0");
+			}
+			if ((devAttr->flags & DMA_DEVICE_FLAG_ON_DMA1) != 0) {
+				len += sprintf(buf + len, "1");
+			}
+			len += sprintf(buf + len, " ");
+		}
+		if ((devAttr->flags & DMA_DEVICE_FLAG_NO_ISR) != 0) {
+			len += sprintf(buf + len, "NoISR ");
+		}
+		if ((devAttr->flags & DMA_DEVICE_FLAG_ALLOW_LARGE_FIFO) != 0) {
+			len += sprintf(buf + len, "Allow-128 ");
+		}
+
+		len +=
+		    sprintf(buf + len,
+			    "Xfer #: %Lu Ticks: %Lu Bytes: %Lu DescLen: %u\n",
+			    devAttr->numTransfers, devAttr->transferTicks,
+			    devAttr->transferBytes,
+			    devAttr->ring.bytesAllocated);
+
+	}
+
+	up(&gDMA.lock);
+	*eof = 1;
+
+	return len;
+}
+
+/****************************************************************************/
+/**
+*   Determines if a DMA_Device_t is "valid".
+*
+*   @return
+*       TRUE        - dma device is valid
+*       FALSE       - dma device isn't valid
+*/
+/****************************************************************************/
+
+static inline int IsDeviceValid(DMA_Device_t device)
+{
+	return (device >= 0) && (device < DMA_NUM_DEVICE_ENTRIES);
+}
+
+/****************************************************************************/
+/**
+*   Translates a DMA handle into a pointer to a channel.
+*
+*   @return
+*       non-NULL    - pointer to DMA_Channel_t
+*       NULL        - DMA Handle was invalid
+*/
+/****************************************************************************/
+
+static inline DMA_Channel_t *HandleToChannel(DMA_Handle_t handle)
+{
+	int controllerIdx;
+	int channelIdx;
+
+	controllerIdx = CONTROLLER_FROM_HANDLE(handle);
+	channelIdx = CHANNEL_FROM_HANDLE(handle);
+
+	if ((controllerIdx > DMA_NUM_CONTROLLERS)
+	    || (channelIdx > DMA_NUM_CHANNELS)) {
+		return NULL;
+	}
+	return &gDMA.controller[controllerIdx].channel[channelIdx];
+}
+
+/****************************************************************************/
+/**
+*   Interrupt handler which is called to process DMA interrupts.
+*/
+/****************************************************************************/
+
+static irqreturn_t dma_interrupt_handler(int irq, void *dev_id)
+{
+	DMA_Channel_t *channel;
+	DMA_DeviceAttribute_t *devAttr;
+	int irqStatus;
+
+	channel = (DMA_Channel_t *) dev_id;
+
+	/* Figure out why we were called, and knock down the interrupt */
+
+	irqStatus = dmacHw_getInterruptStatus(channel->dmacHwHandle);
+	dmacHw_clearInterrupt(channel->dmacHwHandle);
+
+	if ((channel->devType < 0)
+	    || (channel->devType > DMA_NUM_DEVICE_ENTRIES)) {
+		printk(KERN_ERR "dma_interrupt_handler: Invalid devType: %d\n",
+		       channel->devType);
+		return IRQ_NONE;
+	}
+	devAttr = &DMA_gDeviceAttribute[channel->devType];
+
+	/* Update stats */
+
+	if ((irqStatus & dmacHw_INTERRUPT_STATUS_TRANS) != 0) {
+		devAttr->transferTicks +=
+		    (timer_get_tick_count() - devAttr->transferStartTime);
+	}
+
+	if ((irqStatus & dmacHw_INTERRUPT_STATUS_ERROR) != 0) {
+		printk(KERN_ERR
+		       "dma_interrupt_handler: devType :%d DMA error (%s)\n",
+		       channel->devType, devAttr->name);
+	} else {
+		devAttr->numTransfers++;
+		devAttr->transferBytes += devAttr->numBytes;
+	}
+
+	/* Call any installed handler */
+
+	if (devAttr->devHandler != NULL) {
+		devAttr->devHandler(channel->devType, irqStatus,
+				    devAttr->userData);
+	}
+
+	return IRQ_HANDLED;
+}
+
+/****************************************************************************/
+/**
+*   Allocates memory to hold a descriptor ring. The descriptor ring then
+*   needs to be populated by making one or more calls to
+*   dna_add_descriptors.
+*
+*   The returned descriptor ring will be automatically initialized.
+*
+*   @return
+*       0           Descriptor ring was allocated successfully
+*       -EINVAL     Invalid parameters passed in
+*       -ENOMEM     Unable to allocate memory for the desired number of descriptors.
+*/
+/****************************************************************************/
+
+int dma_alloc_descriptor_ring(DMA_DescriptorRing_t *ring,	/* Descriptor ring to populate */
+			      int numDescriptors	/* Number of descriptors that need to be allocated. */
+    ) {
+	size_t bytesToAlloc = dmacHw_descriptorLen(numDescriptors);
+
+	if ((ring == NULL) || (numDescriptors <= 0)) {
+		return -EINVAL;
+	}
+
+	ring->physAddr = 0;
+	ring->descriptorsAllocated = 0;
+	ring->bytesAllocated = 0;
+
+	ring->virtAddr = dma_alloc_writecombine(NULL,
+						     bytesToAlloc,
+						     &ring->physAddr,
+						     GFP_KERNEL);
+	if (ring->virtAddr == NULL) {
+		return -ENOMEM;
+	}
+
+	ring->bytesAllocated = bytesToAlloc;
+	ring->descriptorsAllocated = numDescriptors;
+
+	return dma_init_descriptor_ring(ring, numDescriptors);
+}
+
+EXPORT_SYMBOL(dma_alloc_descriptor_ring);
+
+/****************************************************************************/
+/**
+*   Releases the memory which was previously allocated for a descriptor ring.
+*/
+/****************************************************************************/
+
+void dma_free_descriptor_ring(DMA_DescriptorRing_t *ring	/* Descriptor to release */
+    ) {
+	if (ring->virtAddr != NULL) {
+		dma_free_writecombine(NULL,
+				      ring->bytesAllocated,
+				      ring->virtAddr, ring->physAddr);
+	}
+
+	ring->bytesAllocated = 0;
+	ring->descriptorsAllocated = 0;
+	ring->virtAddr = NULL;
+	ring->physAddr = 0;
+}
+
+EXPORT_SYMBOL(dma_free_descriptor_ring);
+
+/****************************************************************************/
+/**
+*   Initializes a descriptor ring, so that descriptors can be added to it.
+*   Once a descriptor ring has been allocated, it may be reinitialized for
+*   use with additional/different regions of memory.
+*
+*   Note that if 7 descriptors are allocated, it's perfectly acceptable to
+*   initialize the ring with a smaller number of descriptors. The amount
+*   of memory allocated for the descriptor ring will not be reduced, and
+*   the descriptor ring may be reinitialized later
+*
+*   @return
+*       0           Descriptor ring was initialized successfully
+*       -ENOMEM     The descriptor which was passed in has insufficient space
+*                   to hold the desired number of descriptors.
+*/
+/****************************************************************************/
+
+int dma_init_descriptor_ring(DMA_DescriptorRing_t *ring,	/* Descriptor ring to initialize */
+			     int numDescriptors	/* Number of descriptors to initialize. */
+    ) {
+	if (ring->virtAddr == NULL) {
+		return -EINVAL;
+	}
+	if (dmacHw_initDescriptor(ring->virtAddr,
+				  ring->physAddr,
+				  ring->bytesAllocated, numDescriptors) < 0) {
+		printk(KERN_ERR
+		       "dma_init_descriptor_ring: dmacHw_initDescriptor failed\n");
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+EXPORT_SYMBOL(dma_init_descriptor_ring);
+
+/****************************************************************************/
+/**
+*   Determines the number of descriptors which would be required for a
+*   transfer of the indicated memory region.
+*
+*   This function also needs to know which DMA device this transfer will
+*   be destined for, so that the appropriate DMA configuration can be retrieved.
+*   DMA parameters such as transfer width, and whether this is a memory-to-memory
+*   or memory-to-peripheral, etc can all affect the actual number of descriptors
+*   required.
+*
+*   @return
+*       > 0     Returns the number of descriptors required for the indicated transfer
+*       -ENODEV - Device handed in is invalid.
+*       -EINVAL Invalid parameters
+*       -ENOMEM Memory exhausted
+*/
+/****************************************************************************/
+
+int dma_calculate_descriptor_count(DMA_Device_t device,	/* DMA Device that this will be associated with */
+				   dma_addr_t srcData,	/* Place to get data to write to device */
+				   dma_addr_t dstData,	/* Pointer to device data address */
+				   size_t numBytes	/* Number of bytes to transfer to the device */
+    ) {
+	int numDescriptors;
+	DMA_DeviceAttribute_t *devAttr;
+
+	if (!IsDeviceValid(device)) {
+		return -ENODEV;
+	}
+	devAttr = &DMA_gDeviceAttribute[device];
+
+	numDescriptors = dmacHw_calculateDescriptorCount(&devAttr->config,
+							      (void *)srcData,
+							      (void *)dstData,
+							      numBytes);
+	if (numDescriptors < 0) {
+		printk(KERN_ERR
+		       "dma_calculate_descriptor_count: dmacHw_calculateDescriptorCount failed\n");
+		return -EINVAL;
+	}
+
+	return numDescriptors;
+}
+
+EXPORT_SYMBOL(dma_calculate_descriptor_count);
+
+/****************************************************************************/
+/**
+*   Adds a region of memory to the descriptor ring. Note that it may take
+*   multiple descriptors for each region of memory. It is the callers
+*   responsibility to allocate a sufficiently large descriptor ring.
+*
+*   @return
+*       0       Descriptors were added successfully
+*       -ENODEV Device handed in is invalid.
+*       -EINVAL Invalid parameters
+*       -ENOMEM Memory exhausted
+*/
+/****************************************************************************/
+
+int dma_add_descriptors(DMA_DescriptorRing_t *ring,	/* Descriptor ring to add descriptors to */
+			DMA_Device_t device,	/* DMA Device that descriptors are for */
+			dma_addr_t srcData,	/* Place to get data (memory or device) */
+			dma_addr_t dstData,	/* Place to put data (memory or device) */
+			size_t numBytes	/* Number of bytes to transfer to the device */
+    ) {
+	int rc;
+	DMA_DeviceAttribute_t *devAttr;
+
+	if (!IsDeviceValid(device)) {
+		return -ENODEV;
+	}
+	devAttr = &DMA_gDeviceAttribute[device];
+
+	rc = dmacHw_setDataDescriptor(&devAttr->config,
+				      ring->virtAddr,
+				      (void *)srcData,
+				      (void *)dstData, numBytes);
+	if (rc < 0) {
+		printk(KERN_ERR
+		       "dma_add_descriptors: dmacHw_setDataDescriptor failed with code: %d\n",
+		       rc);
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+EXPORT_SYMBOL(dma_add_descriptors);
+
+/****************************************************************************/
+/**
+*   Sets the descriptor ring associated with a device.
+*
+*   Once set, the descriptor ring will be associated with the device, even
+*   across channel request/free calls. Passing in a NULL descriptor ring
+*   will release any descriptor ring currently associated with the device.
+*
+*   Note: If you call dma_transfer, or one of the other dma_alloc_ functions
+*         the descriptor ring may be released and reallocated.
+*
+*   Note: This function will release the descriptor memory for any current
+*         descriptor ring associated with this device.
+*
+*   @return
+*       0       Descriptors were added successfully
+*       -ENODEV Device handed in is invalid.
+*/
+/****************************************************************************/
+
+int dma_set_device_descriptor_ring(DMA_Device_t device,	/* Device to update the descriptor ring for. */
+				   DMA_DescriptorRing_t *ring	/* Descriptor ring to add descriptors to */
+    ) {
+	DMA_DeviceAttribute_t *devAttr;
+
+	if (!IsDeviceValid(device)) {
+		return -ENODEV;
+	}
+	devAttr = &DMA_gDeviceAttribute[device];
+
+	/* Free the previously allocated descriptor ring */
+
+	dma_free_descriptor_ring(&devAttr->ring);
+
+	if (ring != NULL) {
+		/* Copy in the new one */
+
+		devAttr->ring = *ring;
+	}
+
+	/* Set things up so that if dma_transfer is called then this descriptor */
+	/* ring will get freed. */
+
+	devAttr->prevSrcData = 0;
+	devAttr->prevDstData = 0;
+	devAttr->prevNumBytes = 0;
+
+	return 0;
+}
+
+EXPORT_SYMBOL(dma_set_device_descriptor_ring);
+
+/****************************************************************************/
+/**
+*   Retrieves the descriptor ring associated with a device.
+*
+*   @return
+*       0       Descriptors were added successfully
+*       -ENODEV Device handed in is invalid.
+*/
+/****************************************************************************/
+
+int dma_get_device_descriptor_ring(DMA_Device_t device,	/* Device to retrieve the descriptor ring for. */
+				   DMA_DescriptorRing_t *ring	/* Place to store retrieved ring */
+    ) {
+	DMA_DeviceAttribute_t *devAttr;
+
+	memset(ring, 0, sizeof(*ring));
+
+	if (!IsDeviceValid(device)) {
+		return -ENODEV;
+	}
+	devAttr = &DMA_gDeviceAttribute[device];
+
+	*ring = devAttr->ring;
+
+	return 0;
+}
+
+EXPORT_SYMBOL(dma_get_device_descriptor_ring);
+
+/****************************************************************************/
+/**
+*   Configures a DMA channel.
+*
+*   @return
+*       >= 0    - Initialization was successfull.
+*
+*       -EBUSY  - Device is currently being used.
+*       -ENODEV - Device handed in is invalid.
+*/
+/****************************************************************************/
+
+static int ConfigChannel(DMA_Handle_t handle)
+{
+	DMA_Channel_t *channel;
+	DMA_DeviceAttribute_t *devAttr;
+	int controllerIdx;
+
+	channel = HandleToChannel(handle);
+	if (channel == NULL) {
+		return -ENODEV;
+	}
+	devAttr = &DMA_gDeviceAttribute[channel->devType];
+	controllerIdx = CONTROLLER_FROM_HANDLE(handle);
+
+	if ((devAttr->flags & DMA_DEVICE_FLAG_PORT_PER_DMAC) != 0) {
+		if (devAttr->config.transferType ==
+		    dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL) {
+			devAttr->config.dstPeripheralPort =
+			    devAttr->dmacPort[controllerIdx];
+		} else if (devAttr->config.transferType ==
+			   dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM) {
+			devAttr->config.srcPeripheralPort =
+			    devAttr->dmacPort[controllerIdx];
+		}
+	}
+
+	if (dmacHw_configChannel(channel->dmacHwHandle, &devAttr->config) != 0) {
+		printk(KERN_ERR "ConfigChannel: dmacHw_configChannel failed\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*   Intializes all of the data structures associated with the DMA.
+*   @return
+*       >= 0    - Initialization was successfull.
+*
+*       -EBUSY  - Device is currently being used.
+*       -ENODEV - Device handed in is invalid.
+*/
+/****************************************************************************/
+
+int dma_init(void)
+{
+	int rc = 0;
+	int controllerIdx;
+	int channelIdx;
+	DMA_Device_t devIdx;
+	DMA_Channel_t *channel;
+	DMA_Handle_t dedicatedHandle;
+
+	memset(&gDMA, 0, sizeof(gDMA));
+
+	init_MUTEX_LOCKED(&gDMA.lock);
+	init_waitqueue_head(&gDMA.freeChannelQ);
+
+	/* Initialize the Hardware */
+
+	dmacHw_initDma();
+
+	/* Start off by marking all of the DMA channels as shared. */
+
+	for (controllerIdx = 0; controllerIdx < DMA_NUM_CONTROLLERS;
+	     controllerIdx++) {
+		for (channelIdx = 0; channelIdx < DMA_NUM_CHANNELS;
+		     channelIdx++) {
+			channel =
+			    &gDMA.controller[controllerIdx].channel[channelIdx];
+
+			channel->flags = 0;
+			channel->devType = DMA_DEVICE_NONE;
+			channel->lastDevType = DMA_DEVICE_NONE;
+
+#if (DMA_DEBUG_TRACK_RESERVATION)
+			channel->fileName = "";
+			channel->lineNum = 0;
+#endif
+
+			channel->dmacHwHandle =
+			    dmacHw_getChannelHandle(dmacHw_MAKE_CHANNEL_ID
+						    (controllerIdx,
+						     channelIdx));
+			dmacHw_initChannel(channel->dmacHwHandle);
+		}
+	}
+
+	/* Record any special attributes that channels may have */
+
+	gDMA.controller[0].channel[0].flags |= DMA_CHANNEL_FLAG_LARGE_FIFO;
+	gDMA.controller[0].channel[1].flags |= DMA_CHANNEL_FLAG_LARGE_FIFO;
+	gDMA.controller[1].channel[0].flags |= DMA_CHANNEL_FLAG_LARGE_FIFO;
+	gDMA.controller[1].channel[1].flags |= DMA_CHANNEL_FLAG_LARGE_FIFO;
+
+	/* Now walk through and record the dedicated channels. */
+
+	for (devIdx = 0; devIdx < DMA_NUM_DEVICE_ENTRIES; devIdx++) {
+		DMA_DeviceAttribute_t *devAttr = &DMA_gDeviceAttribute[devIdx];
+
+		if (((devAttr->flags & DMA_DEVICE_FLAG_NO_ISR) != 0)
+		    && ((devAttr->flags & DMA_DEVICE_FLAG_IS_DEDICATED) == 0)) {
+			printk(KERN_ERR
+			       "DMA Device: %s Can only request NO_ISR for dedicated devices\n",
+			       devAttr->name);
+			rc = -EINVAL;
+			goto out;
+		}
+
+		if ((devAttr->flags & DMA_DEVICE_FLAG_IS_DEDICATED) != 0) {
+			/* This is a dedicated device. Mark the channel as being reserved. */
+
+			if (devAttr->dedicatedController >= DMA_NUM_CONTROLLERS) {
+				printk(KERN_ERR
+				       "DMA Device: %s DMA Controller %d is out of range\n",
+				       devAttr->name,
+				       devAttr->dedicatedController);
+				rc = -EINVAL;
+				goto out;
+			}
+
+			if (devAttr->dedicatedChannel >= DMA_NUM_CHANNELS) {
+				printk(KERN_ERR
+				       "DMA Device: %s DMA Channel %d is out of range\n",
+				       devAttr->name,
+				       devAttr->dedicatedChannel);
+				rc = -EINVAL;
+				goto out;
+			}
+
+			dedicatedHandle =
+			    MAKE_HANDLE(devAttr->dedicatedController,
+					devAttr->dedicatedChannel);
+			channel = HandleToChannel(dedicatedHandle);
+
+			if ((channel->flags & DMA_CHANNEL_FLAG_IS_DEDICATED) !=
+			    0) {
+				printk
+				    ("DMA Device: %s attempting to use same DMA Controller:Channel (%d:%d) as %s\n",
+				     devAttr->name,
+				     devAttr->dedicatedController,
+				     devAttr->dedicatedChannel,
+				     DMA_gDeviceAttribute[channel->devType].
+				     name);
+				rc = -EBUSY;
+				goto out;
+			}
+
+			channel->flags |= DMA_CHANNEL_FLAG_IS_DEDICATED;
+			channel->devType = devIdx;
+
+			if (devAttr->flags & DMA_DEVICE_FLAG_NO_ISR) {
+				channel->flags |= DMA_CHANNEL_FLAG_NO_ISR;
+			}
+
+			/* For dedicated channels, we can go ahead and configure the DMA channel now */
+			/* as well. */
+
+			ConfigChannel(dedicatedHandle);
+		}
+	}
+
+	/* Go through and register the interrupt handlers */
+
+	for (controllerIdx = 0; controllerIdx < DMA_NUM_CONTROLLERS;
+	     controllerIdx++) {
+		for (channelIdx = 0; channelIdx < DMA_NUM_CHANNELS;
+		     channelIdx++) {
+			channel =
+			    &gDMA.controller[controllerIdx].channel[channelIdx];
+
+			if ((channel->flags & DMA_CHANNEL_FLAG_NO_ISR) == 0) {
+				snprintf(channel->name, sizeof(channel->name),
+					 "dma %d:%d %s", controllerIdx,
+					 channelIdx,
+					 channel->devType ==
+					 DMA_DEVICE_NONE ? "" :
+					 DMA_gDeviceAttribute[channel->devType].
+					 name);
+
+				rc =
+				     request_irq(IRQ_DMA0C0 +
+						 (controllerIdx *
+						  DMA_NUM_CHANNELS) +
+						 channelIdx,
+						 dma_interrupt_handler,
+						 IRQF_DISABLED, channel->name,
+						 channel);
+				if (rc != 0) {
+					printk(KERN_ERR
+					       "request_irq for IRQ_DMA%dC%d failed\n",
+					       controllerIdx, channelIdx);
+				}
+			}
+		}
+	}
+
+	/* Create /proc/dma/channels and /proc/dma/devices */
+
+	gDmaDir = create_proc_entry("dma", S_IFDIR | S_IRUGO | S_IXUGO, NULL);
+
+	if (gDmaDir == NULL) {
+		printk(KERN_ERR "Unable to create /proc/dma\n");
+	} else {
+		create_proc_read_entry("channels", 0, gDmaDir,
+				       dma_proc_read_channels, NULL);
+		create_proc_read_entry("devices", 0, gDmaDir,
+				       dma_proc_read_devices, NULL);
+		create_proc_read_entry("mem-type", 0, gDmaDir,
+				       dma_proc_read_mem_type, NULL);
+	}
+
+out:
+
+	up(&gDMA.lock);
+
+	return rc;
+}
+
+/****************************************************************************/
+/**
+*   Reserves a channel for use with @a dev. If the device is setup to use
+*   a shared channel, then this function will block until a free channel
+*   becomes available.
+*
+*   @return
+*       >= 0    - A valid DMA Handle.
+*       -EBUSY  - Device is currently being used.
+*       -ENODEV - Device handed in is invalid.
+*/
+/****************************************************************************/
+
+#if (DMA_DEBUG_TRACK_RESERVATION)
+DMA_Handle_t dma_request_channel_dbg
+    (DMA_Device_t dev, const char *fileName, int lineNum)
+#else
+DMA_Handle_t dma_request_channel(DMA_Device_t dev)
+#endif
+{
+	DMA_Handle_t handle;
+	DMA_DeviceAttribute_t *devAttr;
+	DMA_Channel_t *channel;
+	int controllerIdx;
+	int controllerIdx2;
+	int channelIdx;
+
+	if (down_interruptible(&gDMA.lock) < 0) {
+		return -ERESTARTSYS;
+	}
+
+	if ((dev < 0) || (dev >= DMA_NUM_DEVICE_ENTRIES)) {
+		handle = -ENODEV;
+		goto out;
+	}
+	devAttr = &DMA_gDeviceAttribute[dev];
+
+#if (DMA_DEBUG_TRACK_RESERVATION)
+	{
+		char *s;
+
+		s = strrchr(fileName, '/');
+		if (s != NULL) {
+			fileName = s + 1;
+		}
+	}
+#endif
+	if ((devAttr->flags & DMA_DEVICE_FLAG_IN_USE) != 0) {
+		/* This device has already been requested and not been freed */
+
+		printk(KERN_ERR "%s: device %s is already requested\n",
+		       __func__, devAttr->name);
+		handle = -EBUSY;
+		goto out;
+	}
+
+	if ((devAttr->flags & DMA_DEVICE_FLAG_IS_DEDICATED) != 0) {
+		/* This device has a dedicated channel. */
+
+		channel =
+		    &gDMA.controller[devAttr->dedicatedController].
+		    channel[devAttr->dedicatedChannel];
+		if ((channel->flags & DMA_CHANNEL_FLAG_IN_USE) != 0) {
+			handle = -EBUSY;
+			goto out;
+		}
+
+		channel->flags |= DMA_CHANNEL_FLAG_IN_USE;
+		devAttr->flags |= DMA_DEVICE_FLAG_IN_USE;
+
+#if (DMA_DEBUG_TRACK_RESERVATION)
+		channel->fileName = fileName;
+		channel->lineNum = lineNum;
+#endif
+		handle =
+		    MAKE_HANDLE(devAttr->dedicatedController,
+				devAttr->dedicatedChannel);
+		goto out;
+	}
+
+	/* This device needs to use one of the shared channels. */
+
+	handle = DMA_INVALID_HANDLE;
+	while (handle == DMA_INVALID_HANDLE) {
+		/* Scan through the shared channels and see if one is available */
+
+		for (controllerIdx2 = 0; controllerIdx2 < DMA_NUM_CONTROLLERS;
+		     controllerIdx2++) {
+			/* Check to see if we should try on controller 1 first. */
+
+			controllerIdx = controllerIdx2;
+			if ((devAttr->
+			     flags & DMA_DEVICE_FLAG_ALLOC_DMA1_FIRST) != 0) {
+				controllerIdx = 1 - controllerIdx;
+			}
+
+			/* See if the device is available on the controller being tested */
+
+			if ((devAttr->
+			     flags & (DMA_DEVICE_FLAG_ON_DMA0 << controllerIdx))
+			    != 0) {
+				for (channelIdx = 0;
+				     channelIdx < DMA_NUM_CHANNELS;
+				     channelIdx++) {
+					channel =
+					    &gDMA.controller[controllerIdx].
+					    channel[channelIdx];
+
+					if (((channel->
+					      flags &
+					      DMA_CHANNEL_FLAG_IS_DEDICATED) ==
+					     0)
+					    &&
+					    ((channel->
+					      flags & DMA_CHANNEL_FLAG_IN_USE)
+					     == 0)) {
+						if (((channel->
+						      flags &
+						      DMA_CHANNEL_FLAG_LARGE_FIFO)
+						     != 0)
+						    &&
+						    ((devAttr->
+						      flags &
+						      DMA_DEVICE_FLAG_ALLOW_LARGE_FIFO)
+						     == 0)) {
+							/* This channel is a large fifo - don't tie it up */
+							/* with devices that we don't want using it. */
+
+							continue;
+						}
+
+						channel->flags |=
+						    DMA_CHANNEL_FLAG_IN_USE;
+						channel->devType = dev;
+						devAttr->flags |=
+						    DMA_DEVICE_FLAG_IN_USE;
+
+#if (DMA_DEBUG_TRACK_RESERVATION)
+						channel->fileName = fileName;
+						channel->lineNum = lineNum;
+#endif
+						handle =
+						    MAKE_HANDLE(controllerIdx,
+								channelIdx);
+
+						/* Now that we've reserved the channel - we can go ahead and configure it */
+
+						if (ConfigChannel(handle) != 0) {
+							handle = -EIO;
+							printk(KERN_ERR
+							       "dma_request_channel: ConfigChannel failed\n");
+						}
+						goto out;
+					}
+				}
+			}
+		}
+
+		/* No channels are currently available. Let's wait for one to free up. */
+
+		{
+			DEFINE_WAIT(wait);
+
+			prepare_to_wait(&gDMA.freeChannelQ, &wait,
+					TASK_INTERRUPTIBLE);
+			up(&gDMA.lock);
+			schedule();
+			finish_wait(&gDMA.freeChannelQ, &wait);
+
+			if (signal_pending(current)) {
+				/* We don't currently hold gDMA.lock, so we return directly */
+
+				return -ERESTARTSYS;
+			}
+		}
+
+		if (down_interruptible(&gDMA.lock)) {
+			return -ERESTARTSYS;
+		}
+	}
+
+out:
+	up(&gDMA.lock);
+
+	return handle;
+}
+
+/* Create both _dbg and non _dbg functions for modules. */
+
+#if (DMA_DEBUG_TRACK_RESERVATION)
+#undef dma_request_channel
+DMA_Handle_t dma_request_channel(DMA_Device_t dev)
+{
+	return dma_request_channel_dbg(dev, __FILE__, __LINE__);
+}
+
+EXPORT_SYMBOL(dma_request_channel_dbg);
+#endif
+EXPORT_SYMBOL(dma_request_channel);
+
+/****************************************************************************/
+/**
+*   Frees a previously allocated DMA Handle.
+*/
+/****************************************************************************/
+
+int dma_free_channel(DMA_Handle_t handle	/* DMA handle. */
+    ) {
+	int rc = 0;
+	DMA_Channel_t *channel;
+	DMA_DeviceAttribute_t *devAttr;
+
+	if (down_interruptible(&gDMA.lock) < 0) {
+		return -ERESTARTSYS;
+	}
+
+	channel = HandleToChannel(handle);
+	if (channel == NULL) {
+		rc = -EINVAL;
+		goto out;
+	}
+
+	devAttr = &DMA_gDeviceAttribute[channel->devType];
+
+	if ((channel->flags & DMA_CHANNEL_FLAG_IS_DEDICATED) == 0) {
+		channel->lastDevType = channel->devType;
+		channel->devType = DMA_DEVICE_NONE;
+	}
+	channel->flags &= ~DMA_CHANNEL_FLAG_IN_USE;
+	devAttr->flags &= ~DMA_DEVICE_FLAG_IN_USE;
+
+out:
+	up(&gDMA.lock);
+
+	wake_up_interruptible(&gDMA.freeChannelQ);
+
+	return rc;
+}
+
+EXPORT_SYMBOL(dma_free_channel);
+
+/****************************************************************************/
+/**
+*   Determines if a given device has been configured as using a shared
+*   channel.
+*
+*   @return
+*       0           Device uses a dedicated channel
+*       > zero      Device uses a shared channel
+*       < zero      Error code
+*/
+/****************************************************************************/
+
+int dma_device_is_channel_shared(DMA_Device_t device	/* Device to check. */
+    ) {
+	DMA_DeviceAttribute_t *devAttr;
+
+	if (!IsDeviceValid(device)) {
+		return -ENODEV;
+	}
+	devAttr = &DMA_gDeviceAttribute[device];
+
+	return ((devAttr->flags & DMA_DEVICE_FLAG_IS_DEDICATED) == 0);
+}
+
+EXPORT_SYMBOL(dma_device_is_channel_shared);
+
+/****************************************************************************/
+/**
+*   Allocates buffers for the descriptors. This is normally done automatically
+*   but needs to be done explicitly when initiating a dma from interrupt
+*   context.
+*
+*   @return
+*       0       Descriptors were allocated successfully
+*       -EINVAL Invalid device type for this kind of transfer
+*               (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
+*       -ENOMEM Memory exhausted
+*/
+/****************************************************************************/
+
+int dma_alloc_descriptors(DMA_Handle_t handle,	/* DMA Handle */
+			  dmacHw_TRANSFER_TYPE_e transferType,	/* Type of transfer being performed */
+			  dma_addr_t srcData,	/* Place to get data to write to device */
+			  dma_addr_t dstData,	/* Pointer to device data address */
+			  size_t numBytes	/* Number of bytes to transfer to the device */
+    ) {
+	DMA_Channel_t *channel;
+	DMA_DeviceAttribute_t *devAttr;
+	int numDescriptors;
+	size_t ringBytesRequired;
+	int rc = 0;
+
+	channel = HandleToChannel(handle);
+	if (channel == NULL) {
+		return -ENODEV;
+	}
+
+	devAttr = &DMA_gDeviceAttribute[channel->devType];
+
+	if (devAttr->config.transferType != transferType) {
+		return -EINVAL;
+	}
+
+	/* Figure out how many descriptors we need. */
+
+	/* printk("srcData: 0x%08x dstData: 0x%08x, numBytes: %d\n", */
+	/*        srcData, dstData, numBytes); */
+
+	numDescriptors = dmacHw_calculateDescriptorCount(&devAttr->config,
+							      (void *)srcData,
+							      (void *)dstData,
+							      numBytes);
+	if (numDescriptors < 0) {
+		printk(KERN_ERR "%s: dmacHw_calculateDescriptorCount failed\n",
+		       __func__);
+		return -EINVAL;
+	}
+
+	/* Check to see if we can reuse the existing descriptor ring, or if we need to allocate */
+	/* a new one. */
+
+	ringBytesRequired = dmacHw_descriptorLen(numDescriptors);
+
+	/* printk("ringBytesRequired: %d\n", ringBytesRequired); */
+
+	if (ringBytesRequired > devAttr->ring.bytesAllocated) {
+		/* Make sure that this code path is never taken from interrupt context. */
+		/* It's OK for an interrupt to initiate a DMA transfer, but the descriptor */
+		/* allocation needs to have already been done. */
+
+		might_sleep();
+
+		/* Free the old descriptor ring and allocate a new one. */
+
+		dma_free_descriptor_ring(&devAttr->ring);
+
+		/* And allocate a new one. */
+
+		rc =
+		     dma_alloc_descriptor_ring(&devAttr->ring,
+					       numDescriptors);
+		if (rc < 0) {
+			printk(KERN_ERR
+			       "%s: dma_alloc_descriptor_ring(%d) failed\n",
+			       __func__, numDescriptors);
+			return rc;
+		}
+		/* Setup the descriptor for this transfer */
+
+		if (dmacHw_initDescriptor(devAttr->ring.virtAddr,
+					  devAttr->ring.physAddr,
+					  devAttr->ring.bytesAllocated,
+					  numDescriptors) < 0) {
+			printk(KERN_ERR "%s: dmacHw_initDescriptor failed\n",
+			       __func__);
+			return -EINVAL;
+		}
+	} else {
+		/* We've already got enough ring buffer allocated. All we need to do is reset */
+		/* any control information, just in case the previous DMA was stopped. */
+
+		dmacHw_resetDescriptorControl(devAttr->ring.virtAddr);
+	}
+
+	/* dma_alloc/free both set the prevSrc/DstData to 0. If they happen to be the same */
+	/* as last time, then we don't need to call setDataDescriptor again. */
+
+	if (dmacHw_setDataDescriptor(&devAttr->config,
+				     devAttr->ring.virtAddr,
+				     (void *)srcData,
+				     (void *)dstData, numBytes) < 0) {
+		printk(KERN_ERR "%s: dmacHw_setDataDescriptor failed\n",
+		       __func__);
+		return -EINVAL;
+	}
+
+	/* Remember the critical information for this transfer so that we can eliminate */
+	/* another call to dma_alloc_descriptors if the caller reuses the same buffers */
+
+	devAttr->prevSrcData = srcData;
+	devAttr->prevDstData = dstData;
+	devAttr->prevNumBytes = numBytes;
+
+	return 0;
+}
+
+EXPORT_SYMBOL(dma_alloc_descriptors);
+
+/****************************************************************************/
+/**
+*   Allocates and sets up descriptors for a double buffered circular buffer.
+*
+*   This is primarily intended to be used for things like the ingress samples
+*   from a microphone.
+*
+*   @return
+*       > 0     Number of descriptors actually allocated.
+*       -EINVAL Invalid device type for this kind of transfer
+*               (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM)
+*       -ENOMEM Memory exhausted
+*/
+/****************************************************************************/
+
+int dma_alloc_double_dst_descriptors(DMA_Handle_t handle,	/* DMA Handle */
+				     dma_addr_t srcData,	/* Physical address of source data */
+				     dma_addr_t dstData1,	/* Physical address of first destination buffer */
+				     dma_addr_t dstData2,	/* Physical address of second destination buffer */
+				     size_t numBytes	/* Number of bytes in each destination buffer */
+    ) {
+	DMA_Channel_t *channel;
+	DMA_DeviceAttribute_t *devAttr;
+	int numDst1Descriptors;
+	int numDst2Descriptors;
+	int numDescriptors;
+	size_t ringBytesRequired;
+	int rc = 0;
+
+	channel = HandleToChannel(handle);
+	if (channel == NULL) {
+		return -ENODEV;
+	}
+
+	devAttr = &DMA_gDeviceAttribute[channel->devType];
+
+	/* Figure out how many descriptors we need. */
+
+	/* printk("srcData: 0x%08x dstData: 0x%08x, numBytes: %d\n", */
+	/*        srcData, dstData, numBytes); */
+
+	numDst1Descriptors =
+	     dmacHw_calculateDescriptorCount(&devAttr->config, (void *)srcData,
+					     (void *)dstData1, numBytes);
+	if (numDst1Descriptors < 0) {
+		return -EINVAL;
+	}
+	numDst2Descriptors =
+	     dmacHw_calculateDescriptorCount(&devAttr->config, (void *)srcData,
+					     (void *)dstData2, numBytes);
+	if (numDst2Descriptors < 0) {
+		return -EINVAL;
+	}
+	numDescriptors = numDst1Descriptors + numDst2Descriptors;
+	/* printk("numDescriptors: %d\n", numDescriptors); */
+
+	/* Check to see if we can reuse the existing descriptor ring, or if we need to allocate */
+	/* a new one. */
+
+	ringBytesRequired = dmacHw_descriptorLen(numDescriptors);
+
+	/* printk("ringBytesRequired: %d\n", ringBytesRequired); */
+
+	if (ringBytesRequired > devAttr->ring.bytesAllocated) {
+		/* Make sure that this code path is never taken from interrupt context. */
+		/* It's OK for an interrupt to initiate a DMA transfer, but the descriptor */
+		/* allocation needs to have already been done. */
+
+		might_sleep();
+
+		/* Free the old descriptor ring and allocate a new one. */
+
+		dma_free_descriptor_ring(&devAttr->ring);
+
+		/* And allocate a new one. */
+
+		rc =
+		     dma_alloc_descriptor_ring(&devAttr->ring,
+					       numDescriptors);
+		if (rc < 0) {
+			printk(KERN_ERR
+			       "%s: dma_alloc_descriptor_ring(%d) failed\n",
+			       __func__, ringBytesRequired);
+			return rc;
+		}
+	}
+
+	/* Setup the descriptor for this transfer. Since this function is used with */
+	/* CONTINUOUS DMA operations, we need to reinitialize every time, otherwise */
+	/* setDataDescriptor will keep trying to append onto the end. */
+
+	if (dmacHw_initDescriptor(devAttr->ring.virtAddr,
+				  devAttr->ring.physAddr,
+				  devAttr->ring.bytesAllocated,
+				  numDescriptors) < 0) {
+		printk(KERN_ERR "%s: dmacHw_initDescriptor failed\n", __func__);
+		return -EINVAL;
+	}
+
+	/* dma_alloc/free both set the prevSrc/DstData to 0. If they happen to be the same */
+	/* as last time, then we don't need to call setDataDescriptor again. */
+
+	if (dmacHw_setDataDescriptor(&devAttr->config,
+				     devAttr->ring.virtAddr,
+				     (void *)srcData,
+				     (void *)dstData1, numBytes) < 0) {
+		printk(KERN_ERR "%s: dmacHw_setDataDescriptor 1 failed\n",
+		       __func__);
+		return -EINVAL;
+	}
+	if (dmacHw_setDataDescriptor(&devAttr->config,
+				     devAttr->ring.virtAddr,
+				     (void *)srcData,
+				     (void *)dstData2, numBytes) < 0) {
+		printk(KERN_ERR "%s: dmacHw_setDataDescriptor 2 failed\n",
+		       __func__);
+		return -EINVAL;
+	}
+
+	/* You should use dma_start_transfer rather than dma_transfer_xxx so we don't */
+	/* try to make the 'prev' variables right. */
+
+	devAttr->prevSrcData = 0;
+	devAttr->prevDstData = 0;
+	devAttr->prevNumBytes = 0;
+
+	return numDescriptors;
+}
+
+EXPORT_SYMBOL(dma_alloc_double_dst_descriptors);
+
+/****************************************************************************/
+/**
+*   Initiates a transfer when the descriptors have already been setup.
+*
+*   This is a special case, and normally, the dma_transfer_xxx functions should
+*   be used.
+*
+*   @return
+*       0       Transfer was started successfully
+*       -ENODEV Invalid handle
+*/
+/****************************************************************************/
+
+int dma_start_transfer(DMA_Handle_t handle)
+{
+	DMA_Channel_t *channel;
+	DMA_DeviceAttribute_t *devAttr;
+
+	channel = HandleToChannel(handle);
+	if (channel == NULL) {
+		return -ENODEV;
+	}
+	devAttr = &DMA_gDeviceAttribute[channel->devType];
+
+	dmacHw_initiateTransfer(channel->dmacHwHandle, &devAttr->config,
+				devAttr->ring.virtAddr);
+
+	/* Since we got this far, everything went successfully */
+
+	return 0;
+}
+
+EXPORT_SYMBOL(dma_start_transfer);
+
+/****************************************************************************/
+/**
+*   Stops a previously started DMA transfer.
+*
+*   @return
+*       0       Transfer was stopped successfully
+*       -ENODEV Invalid handle
+*/
+/****************************************************************************/
+
+int dma_stop_transfer(DMA_Handle_t handle)
+{
+	DMA_Channel_t *channel;
+
+	channel = HandleToChannel(handle);
+	if (channel == NULL) {
+		return -ENODEV;
+	}
+
+	dmacHw_stopTransfer(channel->dmacHwHandle);
+
+	return 0;
+}
+
+EXPORT_SYMBOL(dma_stop_transfer);
+
+/****************************************************************************/
+/**
+*   Waits for a DMA to complete by polling. This function is only intended
+*   to be used for testing. Interrupts should be used for most DMA operations.
+*/
+/****************************************************************************/
+
+int dma_wait_transfer_done(DMA_Handle_t handle)
+{
+	DMA_Channel_t *channel;
+	dmacHw_TRANSFER_STATUS_e status;
+
+	channel = HandleToChannel(handle);
+	if (channel == NULL) {
+		return -ENODEV;
+	}
+
+	while ((status =
+		dmacHw_transferCompleted(channel->dmacHwHandle)) ==
+	       dmacHw_TRANSFER_STATUS_BUSY) {
+		;
+	}
+
+	if (status == dmacHw_TRANSFER_STATUS_ERROR) {
+		printk(KERN_ERR "%s: DMA transfer failed\n", __func__);
+		return -EIO;
+	}
+	return 0;
+}
+
+EXPORT_SYMBOL(dma_wait_transfer_done);
+
+/****************************************************************************/
+/**
+*   Initiates a DMA, allocating the descriptors as required.
+*
+*   @return
+*       0       Transfer was started successfully
+*       -EINVAL Invalid device type for this kind of transfer
+*               (i.e. the device is _DEV_TO_MEM and not _MEM_TO_DEV)
+*/
+/****************************************************************************/
+
+int dma_transfer(DMA_Handle_t handle,	/* DMA Handle */
+		 dmacHw_TRANSFER_TYPE_e transferType,	/* Type of transfer being performed */
+		 dma_addr_t srcData,	/* Place to get data to write to device */
+		 dma_addr_t dstData,	/* Pointer to device data address */
+		 size_t numBytes	/* Number of bytes to transfer to the device */
+    ) {
+	DMA_Channel_t *channel;
+	DMA_DeviceAttribute_t *devAttr;
+	int rc = 0;
+
+	channel = HandleToChannel(handle);
+	if (channel == NULL) {
+		return -ENODEV;
+	}
+
+	devAttr = &DMA_gDeviceAttribute[channel->devType];
+
+	if (devAttr->config.transferType != transferType) {
+		return -EINVAL;
+	}
+
+	/* We keep track of the information about the previous request for this */
+	/* device, and if the attributes match, then we can use the descriptors we setup */
+	/* the last time, and not have to reinitialize everything. */
+
+	{
+		rc =
+		     dma_alloc_descriptors(handle, transferType, srcData,
+					   dstData, numBytes);
+		if (rc != 0) {
+			return rc;
+		}
+	}
+
+	/* And kick off the transfer */
+
+	devAttr->numBytes = numBytes;
+	devAttr->transferStartTime = timer_get_tick_count();
+
+	dmacHw_initiateTransfer(channel->dmacHwHandle, &devAttr->config,
+				devAttr->ring.virtAddr);
+
+	/* Since we got this far, everything went successfully */
+
+	return 0;
+}
+
+EXPORT_SYMBOL(dma_transfer);
+
+/****************************************************************************/
+/**
+*   Set the callback function which will be called when a transfer completes.
+*   If a NULL callback function is set, then no callback will occur.
+*
+*   @note   @a devHandler will be called from IRQ context.
+*
+*   @return
+*       0       - Success
+*       -ENODEV - Device handed in is invalid.
+*/
+/****************************************************************************/
+
+int dma_set_device_handler(DMA_Device_t dev,	/* Device to set the callback for. */
+			   DMA_DeviceHandler_t devHandler,	/* Function to call when the DMA completes */
+			   void *userData	/* Pointer which will be passed to devHandler. */
+    ) {
+	DMA_DeviceAttribute_t *devAttr;
+	unsigned long flags;
+
+	if (!IsDeviceValid(dev)) {
+		return -ENODEV;
+	}
+	devAttr = &DMA_gDeviceAttribute[dev];
+
+	local_irq_save(flags);
+
+	devAttr->userData = userData;
+	devAttr->devHandler = devHandler;
+
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+EXPORT_SYMBOL(dma_set_device_handler);
+
+/****************************************************************************/
+/**
+*   Initializes a memory mapping structure
+*/
+/****************************************************************************/
+
+int dma_init_mem_map(DMA_MemMap_t *memMap)
+{
+	memset(memMap, 0, sizeof(*memMap));
+
+	init_MUTEX(&memMap->lock);
+
+	return 0;
+}
+
+EXPORT_SYMBOL(dma_init_mem_map);
+
+/****************************************************************************/
+/**
+*   Releases any memory currently being held by a memory mapping structure.
+*/
+/****************************************************************************/
+
+int dma_term_mem_map(DMA_MemMap_t *memMap)
+{
+	down(&memMap->lock);	/* Just being paranoid */
+
+	/* Free up any allocated memory */
+
+	up(&memMap->lock);
+	memset(memMap, 0, sizeof(*memMap));
+
+	return 0;
+}
+
+EXPORT_SYMBOL(dma_term_mem_map);
+
+/****************************************************************************/
+/**
+*   Looks at a memory address and categorizes it.
+*
+*   @return One of the values from the DMA_MemType_t enumeration.
+*/
+/****************************************************************************/
+
+DMA_MemType_t dma_mem_type(void *addr)
+{
+	unsigned long addrVal = (unsigned long)addr;
+
+	if (addrVal >= VMALLOC_END) {
+		/* NOTE: DMA virtual memory space starts at 0xFFxxxxxx */
+
+		/* dma_alloc_xxx pages are physically and virtually contiguous */
+
+		return DMA_MEM_TYPE_DMA;
+	}
+
+	/* Technically, we could add one more classification. Addresses between VMALLOC_END */
+	/* and the beginning of the DMA virtual address could be considered to be I/O space. */
+	/* Right now, nobody cares about this particular classification, so we ignore it. */
+
+	if (is_vmalloc_addr(addr)) {
+		/* Address comes from the vmalloc'd region. Pages are virtually */
+		/* contiguous but NOT physically contiguous */
+
+		return DMA_MEM_TYPE_VMALLOC;
+	}
+
+	if (addrVal >= PAGE_OFFSET) {
+		/* PAGE_OFFSET is typically 0xC0000000 */
+
+		/* kmalloc'd pages are physically contiguous */
+
+		return DMA_MEM_TYPE_KMALLOC;
+	}
+
+	return DMA_MEM_TYPE_USER;
+}
+
+EXPORT_SYMBOL(dma_mem_type);
+
+/****************************************************************************/
+/**
+*   Looks at a memory address and determines if we support DMA'ing to/from
+*   that type of memory.
+*
+*   @return boolean -
+*               return value != 0 means dma supported
+*               return value == 0 means dma not supported
+*/
+/****************************************************************************/
+
+int dma_mem_supports_dma(void *addr)
+{
+	DMA_MemType_t memType = dma_mem_type(addr);
+
+	return (memType == DMA_MEM_TYPE_DMA)
+#if ALLOW_MAP_OF_KMALLOC_MEMORY
+	    || (memType == DMA_MEM_TYPE_KMALLOC)
+#endif
+	    || (memType == DMA_MEM_TYPE_USER);
+}
+
+EXPORT_SYMBOL(dma_mem_supports_dma);
+
+/****************************************************************************/
+/**
+*   Maps in a memory region such that it can be used for performing a DMA.
+*
+*   @return
+*/
+/****************************************************************************/
+
+int dma_map_start(DMA_MemMap_t *memMap,	/* Stores state information about the map */
+		  enum dma_data_direction dir	/* Direction that the mapping will be going */
+    ) {
+	int rc;
+
+	down(&memMap->lock);
+
+	DMA_MAP_PRINT("memMap: %p\n", memMap);
+
+	if (memMap->inUse) {
+		printk(KERN_ERR "%s: memory map %p is already being used\n",
+		       __func__, memMap);
+		rc = -EBUSY;
+		goto out;
+	}
+
+	memMap->inUse = 1;
+	memMap->dir = dir;
+	memMap->numRegionsUsed = 0;
+
+	rc = 0;
+
+out:
+
+	DMA_MAP_PRINT("returning %d", rc);
+
+	up(&memMap->lock);
+
+	return rc;
+}
+
+EXPORT_SYMBOL(dma_map_start);
+
+/****************************************************************************/
+/**
+*   Adds a segment of memory to a memory map. Each segment is both
+*   physically and virtually contiguous.
+*
+*   @return     0 on success, error code otherwise.
+*/
+/****************************************************************************/
+
+static int dma_map_add_segment(DMA_MemMap_t *memMap,	/* Stores state information about the map */
+			       DMA_Region_t *region,	/* Region that the segment belongs to */
+			       void *virtAddr,	/* Virtual address of the segment being added */
+			       dma_addr_t physAddr,	/* Physical address of the segment being added */
+			       size_t numBytes	/* Number of bytes of the segment being added */
+    ) {
+	DMA_Segment_t *segment;
+
+	DMA_MAP_PRINT("memMap:%p va:%p pa:0x%x #:%d\n", memMap, virtAddr,
+		      physAddr, numBytes);
+
+	/* Sanity check */
+
+	if (((unsigned long)virtAddr < (unsigned long)region->virtAddr)
+	    || (((unsigned long)virtAddr + numBytes)) >
+	    ((unsigned long)region->virtAddr + region->numBytes)) {
+		printk(KERN_ERR
+		       "%s: virtAddr %p is outside region @ %p len: %d\n",
+		       __func__, virtAddr, region->virtAddr, region->numBytes);
+		return -EINVAL;
+	}
+
+	if (region->numSegmentsUsed > 0) {
+		/* Check to see if this segment is physically contiguous with the previous one */
+
+		segment = &region->segment[region->numSegmentsUsed - 1];
+
+		if ((segment->physAddr + segment->numBytes) == physAddr) {
+			/* It is - just add on to the end */
+
+			DMA_MAP_PRINT("appending %d bytes to last segment\n",
+				      numBytes);
+
+			segment->numBytes += numBytes;
+
+			return 0;
+		}
+	}
+
+	/* Reallocate to hold more segments, if required. */
+
+	if (region->numSegmentsUsed >= region->numSegmentsAllocated) {
+		DMA_Segment_t *newSegment;
+		size_t oldSize =
+		    region->numSegmentsAllocated * sizeof(*newSegment);
+		int newAlloc = region->numSegmentsAllocated + 4;
+		size_t newSize = newAlloc * sizeof(*newSegment);
+
+		newSegment = kmalloc(newSize, GFP_KERNEL);
+		if (newSegment == NULL) {
+			return -ENOMEM;
+		}
+		memcpy(newSegment, region->segment, oldSize);
+		memset(&((uint8_t *) newSegment)[oldSize], 0,
+		       newSize - oldSize);
+		kfree(region->segment);
+
+		region->numSegmentsAllocated = newAlloc;
+		region->segment = newSegment;
+	}
+
+	segment = &region->segment[region->numSegmentsUsed];
+	region->numSegmentsUsed++;
+
+	segment->virtAddr = virtAddr;
+	segment->physAddr = physAddr;
+	segment->numBytes = numBytes;
+
+	DMA_MAP_PRINT("returning success\n");
+
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*   Adds a region of memory to a memory map. Each region is virtually
+*   contiguous, but not necessarily physically contiguous.
+*
+*   @return     0 on success, error code otherwise.
+*/
+/****************************************************************************/
+
+int dma_map_add_region(DMA_MemMap_t *memMap,	/* Stores state information about the map */
+		       void *mem,	/* Virtual address that we want to get a map of */
+		       size_t numBytes	/* Number of bytes being mapped */
+    ) {
+	unsigned long addr = (unsigned long)mem;
+	unsigned int offset;
+	int rc = 0;
+	DMA_Region_t *region;
+	dma_addr_t physAddr;
+
+	down(&memMap->lock);
+
+	DMA_MAP_PRINT("memMap:%p va:%p #:%d\n", memMap, mem, numBytes);
+
+	if (!memMap->inUse) {
+		printk(KERN_ERR "%s: Make sure you call dma_map_start first\n",
+		       __func__);
+		rc = -EINVAL;
+		goto out;
+	}
+
+	/* Reallocate to hold more regions. */
+
+	if (memMap->numRegionsUsed >= memMap->numRegionsAllocated) {
+		DMA_Region_t *newRegion;
+		size_t oldSize =
+		    memMap->numRegionsAllocated * sizeof(*newRegion);
+		int newAlloc = memMap->numRegionsAllocated + 4;
+		size_t newSize = newAlloc * sizeof(*newRegion);
+
+		newRegion = kmalloc(newSize, GFP_KERNEL);
+		if (newRegion == NULL) {
+			rc = -ENOMEM;
+			goto out;
+		}
+		memcpy(newRegion, memMap->region, oldSize);
+		memset(&((uint8_t *) newRegion)[oldSize], 0, newSize - oldSize);
+
+		kfree(memMap->region);
+
+		memMap->numRegionsAllocated = newAlloc;
+		memMap->region = newRegion;
+	}
+
+	region = &memMap->region[memMap->numRegionsUsed];
+	memMap->numRegionsUsed++;
+
+	offset = addr & ~PAGE_MASK;
+
+	region->memType = dma_mem_type(mem);
+	region->virtAddr = mem;
+	region->numBytes = numBytes;
+	region->numSegmentsUsed = 0;
+	region->numLockedPages = 0;
+	region->lockedPages = NULL;
+
+	switch (region->memType) {
+	case DMA_MEM_TYPE_VMALLOC:
+		{
+			atomic_inc(&gDmaStatMemTypeVmalloc);
+
+			/* printk(KERN_ERR "%s: vmalloc'd pages are not supported\n", __func__); */
+
+			/* vmalloc'd pages are not physically contiguous */
+
+			rc = -EINVAL;
+			break;
+		}
+
+	case DMA_MEM_TYPE_KMALLOC:
+		{
+			atomic_inc(&gDmaStatMemTypeKmalloc);
+
+			/* kmalloc'd pages are physically contiguous, so they'll have exactly */
+			/* one segment */
+
+#if ALLOW_MAP_OF_KMALLOC_MEMORY
+			physAddr =
+			    dma_map_single(NULL, mem, numBytes, memMap->dir);
+			rc = dma_map_add_segment(memMap, region, mem, physAddr,
+						 numBytes);
+#else
+			rc = -EINVAL;
+#endif
+			break;
+		}
+
+	case DMA_MEM_TYPE_DMA:
+		{
+			/* dma_alloc_xxx pages are physically contiguous */
+
+			atomic_inc(&gDmaStatMemTypeCoherent);
+
+			physAddr = (vmalloc_to_pfn(mem) << PAGE_SHIFT) + offset;
+
+			dma_sync_single_for_cpu(NULL, physAddr, numBytes,
+						memMap->dir);
+			rc = dma_map_add_segment(memMap, region, mem, physAddr,
+						 numBytes);
+			break;
+		}
+
+	case DMA_MEM_TYPE_USER:
+		{
+			size_t firstPageOffset;
+			size_t firstPageSize;
+			struct page **pages;
+			struct task_struct *userTask;
+
+			atomic_inc(&gDmaStatMemTypeUser);
+
+#if 1
+			/* If the pages are user pages, then the dma_mem_map_set_user_task function */
+			/* must have been previously called. */
+
+			if (memMap->userTask == NULL) {
+				printk(KERN_ERR
+				       "%s: must call dma_mem_map_set_user_task when using user-mode memory\n",
+				       __func__);
+				return -EINVAL;
+			}
+
+			/* User pages need to be locked. */
+
+			firstPageOffset =
+			    (unsigned long)region->virtAddr & (PAGE_SIZE - 1);
+			firstPageSize = PAGE_SIZE - firstPageOffset;
+
+			region->numLockedPages = (firstPageOffset
+						  + region->numBytes +
+						  PAGE_SIZE - 1) / PAGE_SIZE;
+			pages =
+			    kmalloc(region->numLockedPages *
+				    sizeof(struct page *), GFP_KERNEL);
+
+			if (pages == NULL) {
+				region->numLockedPages = 0;
+				return -ENOMEM;
+			}
+
+			userTask = memMap->userTask;
+
+			down_read(&userTask->mm->mmap_sem);
+			rc = get_user_pages(userTask,	/* task */
+					    userTask->mm,	/* mm */
+					    (unsigned long)region->virtAddr,	/* start */
+					    region->numLockedPages,	/* len */
+					    memMap->dir == DMA_FROM_DEVICE,	/* write */
+					    0,	/* force */
+					    pages,	/* pages (array of pointers to page) */
+					    NULL);	/* vmas */
+			up_read(&userTask->mm->mmap_sem);
+
+			if (rc != region->numLockedPages) {
+				kfree(pages);
+				region->numLockedPages = 0;
+
+				if (rc >= 0) {
+					rc = -EINVAL;
+				}
+			} else {
+				uint8_t *virtAddr = region->virtAddr;
+				size_t bytesRemaining;
+				int pageIdx;
+
+				rc = 0;	/* Since get_user_pages returns +ve number */
+
+				region->lockedPages = pages;
+
+				/* We've locked the user pages. Now we need to walk them and figure */
+				/* out the physical addresses. */
+
+				/* The first page may be partial */
+
+				dma_map_add_segment(memMap,
+						    region,
+						    virtAddr,
+						    PFN_PHYS(page_to_pfn
+							     (pages[0])) +
+						    firstPageOffset,
+						    firstPageSize);
+
+				virtAddr += firstPageSize;
+				bytesRemaining =
+				    region->numBytes - firstPageSize;
+
+				for (pageIdx = 1;
+				     pageIdx < region->numLockedPages;
+				     pageIdx++) {
+					size_t bytesThisPage =
+					    (bytesRemaining >
+					     PAGE_SIZE ? PAGE_SIZE :
+					     bytesRemaining);
+
+					DMA_MAP_PRINT
+					    ("pageIdx:%d pages[pageIdx]=%p pfn=%u phys=%u\n",
+					     pageIdx, pages[pageIdx],
+					     page_to_pfn(pages[pageIdx]),
+					     PFN_PHYS(page_to_pfn
+						      (pages[pageIdx])));
+
+					dma_map_add_segment(memMap,
+							    region,
+							    virtAddr,
+							    PFN_PHYS(page_to_pfn
+								     (pages
+								      [pageIdx])),
+							    bytesThisPage);
+
+					virtAddr += bytesThisPage;
+					bytesRemaining -= bytesThisPage;
+				}
+			}
+#else
+			printk(KERN_ERR
+			       "%s: User mode pages are not yet supported\n",
+			       __func__);
+
+			/* user pages are not physically contiguous */
+
+			rc = -EINVAL;
+#endif
+			break;
+		}
+
+	default:
+		{
+			printk(KERN_ERR "%s: Unsupported memory type: %d\n",
+			       __func__, region->memType);
+
+			rc = -EINVAL;
+			break;
+		}
+	}
+
+	if (rc != 0) {
+		memMap->numRegionsUsed--;
+	}
+
+out:
+
+	DMA_MAP_PRINT("returning %d\n", rc);
+
+	up(&memMap->lock);
+
+	return rc;
+}
+
+EXPORT_SYMBOL(dma_map_add_segment);
+
+/****************************************************************************/
+/**
+*   Maps in a memory region such that it can be used for performing a DMA.
+*
+*   @return     0 on success, error code otherwise.
+*/
+/****************************************************************************/
+
+int dma_map_mem(DMA_MemMap_t *memMap,	/* Stores state information about the map */
+		void *mem,	/* Virtual address that we want to get a map of */
+		size_t numBytes,	/* Number of bytes being mapped */
+		enum dma_data_direction dir	/* Direction that the mapping will be going */
+    ) {
+	int rc;
+
+	rc = dma_map_start(memMap, dir);
+	if (rc == 0) {
+		rc = dma_map_add_region(memMap, mem, numBytes);
+		if (rc < 0) {
+			/* Since the add fails, this function will fail, and the caller won't */
+			/* call unmap, so we need to do it here. */
+
+			dma_unmap(memMap, 0);
+		}
+	}
+
+	return rc;
+}
+
+EXPORT_SYMBOL(dma_map_mem);
+
+/****************************************************************************/
+/**
+*   Setup a descriptor ring for a given memory map.
+*
+*   It is assumed that the descriptor ring has already been initialized, and
+*   this routine will only reallocate a new descriptor ring if the existing
+*   one is too small.
+*
+*   @return     0 on success, error code otherwise.
+*/
+/****************************************************************************/
+
+int dma_map_create_descriptor_ring(DMA_Device_t dev,	/* DMA device (where the ring is stored) */
+				   DMA_MemMap_t *memMap,	/* Memory map that will be used */
+				   dma_addr_t devPhysAddr	/* Physical address of device */
+    ) {
+	int rc;
+	int numDescriptors;
+	DMA_DeviceAttribute_t *devAttr;
+	DMA_Region_t *region;
+	DMA_Segment_t *segment;
+	dma_addr_t srcPhysAddr;
+	dma_addr_t dstPhysAddr;
+	int regionIdx;
+	int segmentIdx;
+
+	devAttr = &DMA_gDeviceAttribute[dev];
+
+	down(&memMap->lock);
+
+	/* Figure out how many descriptors we need */
+
+	numDescriptors = 0;
+	for (regionIdx = 0; regionIdx < memMap->numRegionsUsed; regionIdx++) {
+		region = &memMap->region[regionIdx];
+
+		for (segmentIdx = 0; segmentIdx < region->numSegmentsUsed;
+		     segmentIdx++) {
+			segment = &region->segment[segmentIdx];
+
+			if (memMap->dir == DMA_TO_DEVICE) {
+				srcPhysAddr = segment->physAddr;
+				dstPhysAddr = devPhysAddr;
+			} else {
+				srcPhysAddr = devPhysAddr;
+				dstPhysAddr = segment->physAddr;
+			}
+
+			rc =
+			     dma_calculate_descriptor_count(dev, srcPhysAddr,
+							    dstPhysAddr,
+							    segment->
+							    numBytes);
+			if (rc < 0) {
+				printk(KERN_ERR
+				       "%s: dma_calculate_descriptor_count failed: %d\n",
+				       __func__, rc);
+				goto out;
+			}
+			numDescriptors += rc;
+		}
+	}
+
+	/* Adjust the size of the ring, if it isn't big enough */
+
+	if (numDescriptors > devAttr->ring.descriptorsAllocated) {
+		dma_free_descriptor_ring(&devAttr->ring);
+		rc =
+		     dma_alloc_descriptor_ring(&devAttr->ring,
+					       numDescriptors);
+		if (rc < 0) {
+			printk(KERN_ERR
+			       "%s: dma_alloc_descriptor_ring failed: %d\n",
+			       __func__, rc);
+			goto out;
+		}
+	} else {
+		rc =
+		     dma_init_descriptor_ring(&devAttr->ring,
+					      numDescriptors);
+		if (rc < 0) {
+			printk(KERN_ERR
+			       "%s: dma_init_descriptor_ring failed: %d\n",
+			       __func__, rc);
+			goto out;
+		}
+	}
+
+	/* Populate the descriptors */
+
+	for (regionIdx = 0; regionIdx < memMap->numRegionsUsed; regionIdx++) {
+		region = &memMap->region[regionIdx];
+
+		for (segmentIdx = 0; segmentIdx < region->numSegmentsUsed;
+		     segmentIdx++) {
+			segment = &region->segment[segmentIdx];
+
+			if (memMap->dir == DMA_TO_DEVICE) {
+				srcPhysAddr = segment->physAddr;
+				dstPhysAddr = devPhysAddr;
+			} else {
+				srcPhysAddr = devPhysAddr;
+				dstPhysAddr = segment->physAddr;
+			}
+
+			rc =
+			     dma_add_descriptors(&devAttr->ring, dev,
+						 srcPhysAddr, dstPhysAddr,
+						 segment->numBytes);
+			if (rc < 0) {
+				printk(KERN_ERR
+				       "%s: dma_add_descriptors failed: %d\n",
+				       __func__, rc);
+				goto out;
+			}
+		}
+	}
+
+	rc = 0;
+
+out:
+
+	up(&memMap->lock);
+	return rc;
+}
+
+EXPORT_SYMBOL(dma_map_create_descriptor_ring);
+
+/****************************************************************************/
+/**
+*   Maps in a memory region such that it can be used for performing a DMA.
+*
+*   @return
+*/
+/****************************************************************************/
+
+int dma_unmap(DMA_MemMap_t *memMap,	/* Stores state information about the map */
+	      int dirtied	/* non-zero if any of the pages were modified */
+    ) {
+	int regionIdx;
+	int segmentIdx;
+	DMA_Region_t *region;
+	DMA_Segment_t *segment;
+
+	for (regionIdx = 0; regionIdx < memMap->numRegionsUsed; regionIdx++) {
+		region = &memMap->region[regionIdx];
+
+		for (segmentIdx = 0; segmentIdx < region->numSegmentsUsed;
+		     segmentIdx++) {
+			segment = &region->segment[segmentIdx];
+
+			switch (region->memType) {
+			case DMA_MEM_TYPE_VMALLOC:
+				{
+					printk(KERN_ERR
+					       "%s: vmalloc'd pages are not yet supported\n",
+					       __func__);
+					return -EINVAL;
+				}
+
+			case DMA_MEM_TYPE_KMALLOC:
+				{
+#if ALLOW_MAP_OF_KMALLOC_MEMORY
+					dma_unmap_single(NULL,
+							 segment->physAddr,
+							 segment->numBytes,
+							 memMap->dir);
+#endif
+					break;
+				}
+
+			case DMA_MEM_TYPE_DMA:
+				{
+					dma_sync_single_for_cpu(NULL,
+								segment->
+								physAddr,
+								segment->
+								numBytes,
+								memMap->dir);
+					break;
+				}
+
+			case DMA_MEM_TYPE_USER:
+				{
+					/* Nothing to do here. */
+
+					break;
+				}
+
+			default:
+				{
+					printk(KERN_ERR
+					       "%s: Unsupported memory type: %d\n",
+					       __func__, region->memType);
+					return -EINVAL;
+				}
+			}
+
+			segment->virtAddr = NULL;
+			segment->physAddr = 0;
+			segment->numBytes = 0;
+		}
+
+		if (region->numLockedPages > 0) {
+			int pageIdx;
+
+			/* Some user pages were locked. We need to go and unlock them now. */
+
+			for (pageIdx = 0; pageIdx < region->numLockedPages;
+			     pageIdx++) {
+				struct page *page =
+				    region->lockedPages[pageIdx];
+
+				if (memMap->dir == DMA_FROM_DEVICE) {
+					SetPageDirty(page);
+				}
+				page_cache_release(page);
+			}
+			kfree(region->lockedPages);
+			region->numLockedPages = 0;
+			region->lockedPages = NULL;
+		}
+
+		region->memType = DMA_MEM_TYPE_NONE;
+		region->virtAddr = NULL;
+		region->numBytes = 0;
+		region->numSegmentsUsed = 0;
+	}
+	memMap->userTask = NULL;
+	memMap->numRegionsUsed = 0;
+	memMap->inUse = 0;
+
+	up(&memMap->lock);
+
+	return 0;
+}
+
+EXPORT_SYMBOL(dma_unmap);
-- 
cgit v1.2.3


From 34559125742645843bc7639900c7b4737ec12b72 Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Fri, 7 Aug 2009 20:01:47 +0100
Subject: ARM: 5649/1: bcmring: add bcmring timer function

bcmring timer helper function, hardware register headers

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-bcmring/include/mach/timer.h | 77 ++++++++++++++++++++++++++++++
 arch/arm/mach-bcmring/include/mach/timex.h | 25 ++++++++++
 arch/arm/mach-bcmring/timer.c              | 62 ++++++++++++++++++++++++
 3 files changed, 164 insertions(+)
 create mode 100644 arch/arm/mach-bcmring/include/mach/timer.h
 create mode 100644 arch/arm/mach-bcmring/include/mach/timex.h
 create mode 100644 arch/arm/mach-bcmring/timer.c

(limited to 'arch')

diff --git a/arch/arm/mach-bcmring/include/mach/timer.h b/arch/arm/mach-bcmring/include/mach/timer.h
new file mode 100644
index 00000000000..5a94bbb032b
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/timer.h
@@ -0,0 +1,77 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/*
+*
+*****************************************************************************
+*
+*  timer.h
+*
+*  PURPOSE:
+*
+*
+*
+*  NOTES:
+*
+*****************************************************************************/
+
+#if !defined(BCM_LINUX_TIMER_H)
+#define BCM_LINUX_TIMER_H
+
+#if defined(__KERNEL__)
+
+/* ---- Include Files ---------------------------------------------------- */
+/* ---- Constants and Types ---------------------------------------------- */
+
+typedef unsigned int timer_tick_count_t;
+typedef unsigned int timer_tick_rate_t;
+typedef unsigned int timer_msec_t;
+
+/* ---- Variable Externs ------------------------------------------------- */
+/* ---- Function Prototypes ---------------------------------------------- */
+
+/****************************************************************************
+*
+*  timer_get_tick_count
+*
+*
+***************************************************************************/
+timer_tick_count_t timer_get_tick_count(void);
+
+/****************************************************************************
+*
+*  timer_get_tick_rate
+*
+*
+***************************************************************************/
+timer_tick_rate_t timer_get_tick_rate(void);
+
+/****************************************************************************
+*
+*  timer_get_msec
+*
+*
+***************************************************************************/
+timer_msec_t timer_get_msec(void);
+
+/****************************************************************************
+*
+*  timer_ticks_to_msec
+*
+*
+***************************************************************************/
+timer_msec_t timer_ticks_to_msec(timer_tick_count_t ticks);
+
+#endif /* __KERNEL__ */
+#endif /* BCM_LINUX_TIMER_H */
diff --git a/arch/arm/mach-bcmring/include/mach/timex.h b/arch/arm/mach-bcmring/include/mach/timex.h
new file mode 100644
index 00000000000..40d033ec589
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/timex.h
@@ -0,0 +1,25 @@
+/*
+ *
+ *  Integrator architecture timex specifications
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+/*
+ * Specifies the number of ticks per second
+ */
+#define CLOCK_TICK_RATE		100000 /* REG_SMT_TICKS_PER_SEC */
diff --git a/arch/arm/mach-bcmring/timer.c b/arch/arm/mach-bcmring/timer.c
new file mode 100644
index 00000000000..2d415d2a8e6
--- /dev/null
+++ b/arch/arm/mach-bcmring/timer.c
@@ -0,0 +1,62 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#include <linux/version.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <csp/tmrHw.h>
+
+#include <mach/timer.h>
+/* The core.c file initializes timers 1 and 3 as a linux clocksource. */
+/* The real time clock should probably be the real linux clocksource. */
+/* In the meantime, this file should agree with core.c as to the */
+/* profiling timer. If the clocksource is moved to rtc later, then */
+/* we can init the profiling timer here instead. */
+
+/* Timer 1 provides 25MHz resolution syncrhonized to scheduling and APM timing */
+/* Timer 3 provides bus freqeuncy sychronized to ACLK, but spread spectrum will */
+/* affect synchronization with scheduling and APM timing. */
+
+#define PROF_TIMER 1
+
+timer_tick_rate_t timer_get_tick_rate(void)
+{
+	return tmrHw_getCountRate(PROF_TIMER);
+}
+
+timer_tick_count_t timer_get_tick_count(void)
+{
+	return tmrHw_GetCurrentCount(PROF_TIMER);	/* change downcounter to upcounter */
+}
+
+timer_msec_t timer_ticks_to_msec(timer_tick_count_t ticks)
+{
+	static int tickRateMsec;
+
+	if (tickRateMsec == 0) {
+		tickRateMsec = timer_get_tick_rate() / 1000;
+	}
+
+	return ticks / tickRateMsec;
+}
+
+timer_msec_t timer_get_msec(void)
+{
+	return timer_ticks_to_msec(timer_get_tick_count());
+}
+
+EXPORT_SYMBOL(timer_get_tick_count);
+EXPORT_SYMBOL(timer_ticks_to_msec);
+EXPORT_SYMBOL(timer_get_tick_rate);
+EXPORT_SYMBOL(timer_get_msec);
-- 
cgit v1.2.3


From 16f5875034fa9e36a72c4223c8ef42cfe461d766 Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Fri, 7 Aug 2009 20:02:21 +0100
Subject: ARM: 5650/1: bcmring: add io.h, uncompress. h, and entry-macro.S

add remaining header files in include/mach directory
add entry-macro.S file

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-bcmring/include/mach/entry-macro.S | 86 ++++++++++++++++++++++++
 arch/arm/mach-bcmring/include/mach/io.h          | 56 +++++++++++++++
 arch/arm/mach-bcmring/include/mach/uncompress.h  | 43 ++++++++++++
 3 files changed, 185 insertions(+)
 create mode 100644 arch/arm/mach-bcmring/include/mach/entry-macro.S
 create mode 100644 arch/arm/mach-bcmring/include/mach/io.h
 create mode 100644 arch/arm/mach-bcmring/include/mach/uncompress.h

(limited to 'arch')

diff --git a/arch/arm/mach-bcmring/include/mach/entry-macro.S b/arch/arm/mach-bcmring/include/mach/entry-macro.S
new file mode 100644
index 00000000000..7d393ca010a
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/entry-macro.S
@@ -0,0 +1,86 @@
+/*****************************************************************************
+* Copyright 2006 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/*
+ *
+ * Low-level IRQ helper macros for BCMRing-based platforms
+ *
+ */
+#include <mach/irqs.h>
+#include <mach/hardware.h>
+#include <mach/csp/mm_io.h>
+
+		.macro	disable_fiq
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		ldr	\base, =(MM_IO_BASE_INTC0)
+		ldr	\irqstat, [\base, #0]		@ get status
+                ldr     \irqnr, [\base, #0x10]          @ mask with enable register
+                ands    \irqstat, \irqstat, \irqnr
+		mov	\irqnr, #IRQ_INTC0_START
+		cmp	\irqstat, #0
+		bne	1001f
+
+		ldr	\base, =(MM_IO_BASE_INTC1)
+		ldr	\irqstat, [\base, #0]		@ get status
+                ldr     \irqnr, [\base, #0x10]          @ mask with enable register
+                ands    \irqstat, \irqstat, \irqnr
+		mov	\irqnr, #IRQ_INTC1_START
+		cmp	\irqstat, #0
+		bne	1001f
+
+		ldr	\base, =(MM_IO_BASE_SINTC)
+		ldr	\irqstat, [\base, #0]		@ get status
+                ldr     \irqnr, [\base, #0x10]          @ mask with enable register
+                ands    \irqstat, \irqstat, \irqnr
+		mov	\irqnr, #0xffffffff             @ code meaning no interrupt bits set
+		cmp	\irqstat, #0
+		beq	1002f
+
+		mov	\irqnr, #IRQ_SINTC_START        @ something is set, so fixup return value
+
+1001:
+		movs	\tmp, \irqstat, lsl #16
+		movne	\irqstat, \tmp
+		addeq	\irqnr, \irqnr, #16
+
+		movs	\tmp, \irqstat, lsl #8
+		movne	\irqstat, \tmp
+		addeq	\irqnr, \irqnr, #8
+
+		movs	\tmp, \irqstat, lsl #4
+		movne	\irqstat, \tmp
+		addeq	\irqnr, \irqnr, #4
+
+		movs	\tmp, \irqstat, lsl #2
+		movne	\irqstat, \tmp
+		addeq	\irqnr, \irqnr, #2
+
+		movs	\tmp, \irqstat, lsl #1
+		addeq	\irqnr, \irqnr, #1
+		orrs	\base, \base, #1
+
+1002:           @ irqnr will be set to 0xffffffff if no irq bits are set
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	irq_prio_table
+		.endm
+
diff --git a/arch/arm/mach-bcmring/include/mach/io.h b/arch/arm/mach-bcmring/include/mach/io.h
new file mode 100644
index 00000000000..4db0eff9035
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/io.h
@@ -0,0 +1,56 @@
+/*
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __io(a)         ((void __iomem *)HW_IO_PHYS_TO_VIRT(a))
+
+/* Do not enable mem_pci for a big endian arm architecture or unexpected byteswaps will */
+/* happen in readw/writew etc. */
+
+#define readb(c)        __raw_readb(c)
+#define readw(c)        __raw_readw(c)
+#define readl(c)        __raw_readl(c)
+#define readb_relaxed(addr) readb(addr)
+#define readw_relaxed(addr) readw(addr)
+#define readl_relaxed(addr) readl(addr)
+
+#define readsb(p, d, l)   __raw_readsb(p, d, l)
+#define readsw(p, d, l)   __raw_readsw(p, d, l)
+#define readsl(p, d, l)   __raw_readsl(p, d, l)
+
+#define writeb(v, c)     __raw_writeb(v, c)
+#define writew(v, c)     __raw_writew(v, c)
+#define writel(v, c)     __raw_writel(v, c)
+
+#define writesb(p, d, l)  __raw_writesb(p, d, l)
+#define writesw(p, d, l)  __raw_writesw(p, d, l)
+#define writesl(p, d, l)  __raw_writesl(p, d, l)
+
+#define memset_io(c, v, l)    _memset_io((c), (v), (l))
+#define memcpy_fromio(a, c, l)    _memcpy_fromio((a), (c), (l))
+#define memcpy_toio(c, a, l)  _memcpy_toio((c), (a), (l))
+
+#define eth_io_copy_and_sum(s, c, l, b) eth_copy_and_sum((s), (c), (l), (b))
+
+#endif
diff --git a/arch/arm/mach-bcmring/include/mach/uncompress.h b/arch/arm/mach-bcmring/include/mach/uncompress.h
new file mode 100644
index 00000000000..9c9821b7797
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/uncompress.h
@@ -0,0 +1,43 @@
+/*****************************************************************************
+* Copyright 2005 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+#include <mach/csp/mm_addr.h>
+
+#define BCMRING_UART_0_DR (*(volatile unsigned int *)MM_ADDR_IO_UARTA)
+#define BCMRING_UART_0_FR (*(volatile unsigned int *)(MM_ADDR_IO_UARTA + 0x18))
+/*
+ * This does not append a newline
+ */
+static inline void putc(int c)
+{
+	/* Send out UARTA */
+	while (BCMRING_UART_0_FR & (1 << 5))
+		;
+
+	BCMRING_UART_0_DR = c;
+}
+
+
+static inline void flush(void)
+{
+	/* Wait for the tx fifo to be empty */
+	while ((BCMRING_UART_0_FR & (1 << 7)) == 0)
+		;
+
+	/* Wait for the final character to be sent on the txd line */
+	while (BCMRING_UART_0_FR & (1 << 3))
+		;
+}
+
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
-- 
cgit v1.2.3


From 7bab8bfc7f1060e3ab4bc0a90813a9338e6994b9 Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Fri, 7 Aug 2009 20:02:59 +0100
Subject: ARM: 5651/1: bcmring: csp capability header files

add mach-bcmring csp capability header files

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-bcmring/include/mach/csp/cap.h       |  63 ++++
 .../arm/mach-bcmring/include/mach/csp/cap_inline.h | 409 +++++++++++++++++++++
 arch/arm/mach-bcmring/include/mach/csp/hw_cfg.h    |  73 ++++
 3 files changed, 545 insertions(+)
 create mode 100644 arch/arm/mach-bcmring/include/mach/csp/cap.h
 create mode 100644 arch/arm/mach-bcmring/include/mach/csp/cap_inline.h
 create mode 100644 arch/arm/mach-bcmring/include/mach/csp/hw_cfg.h

(limited to 'arch')

diff --git a/arch/arm/mach-bcmring/include/mach/csp/cap.h b/arch/arm/mach-bcmring/include/mach/csp/cap.h
new file mode 100644
index 00000000000..30fa2d54063
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/cap.h
@@ -0,0 +1,63 @@
+/*****************************************************************************
+* Copyright 2009 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef CAP_H
+#define CAP_H
+
+/* ---- Include Files ---------------------------------------------------- */
+/* ---- Public Constants and Types --------------------------------------- */
+typedef enum {
+	CAP_NOT_PRESENT = 0,
+	CAP_PRESENT
+} CAP_RC_T;
+
+typedef enum {
+	CAP_VPM,
+	CAP_ETH_PHY,
+	CAP_ETH_GMII,
+	CAP_ETH_SGMII,
+	CAP_USB,
+	CAP_TSC,
+	CAP_EHSS,
+	CAP_SDIO,
+	CAP_UARTB,
+	CAP_KEYPAD,
+	CAP_CLCD,
+	CAP_GE,
+	CAP_LEDM,
+	CAP_BBL,
+	CAP_VDEC,
+	CAP_PIF,
+	CAP_APM,
+	CAP_SPU,
+	CAP_PKA,
+	CAP_RNG,
+} CAP_CAPABILITY_T;
+
+typedef enum {
+	CAP_LCD_WVGA = 0,
+	CAP_LCD_VGA = 0x1,
+	CAP_LCD_WQVGA = 0x2,
+	CAP_LCD_QVGA = 0x3
+} CAP_LCD_RES_T;
+
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+static inline CAP_RC_T cap_isPresent(CAP_CAPABILITY_T capability, int index);
+static inline uint32_t cap_getMaxArmSpeedHz(void);
+static inline uint32_t cap_getMaxVpmSpeedHz(void);
+static inline CAP_LCD_RES_T cap_getMaxLcdRes(void);
+
+#endif
diff --git a/arch/arm/mach-bcmring/include/mach/csp/cap_inline.h b/arch/arm/mach-bcmring/include/mach/csp/cap_inline.h
new file mode 100644
index 00000000000..933ce68ed90
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/cap_inline.h
@@ -0,0 +1,409 @@
+/*****************************************************************************
+* Copyright 2009 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef CAP_INLINE_H
+#define CAP_INLINE_H
+
+/* ---- Include Files ---------------------------------------------------- */
+#include <mach/csp/cap.h>
+#include <cfg_global.h>
+
+/* ---- Public Constants and Types --------------------------------------- */
+#define CAP_CONFIG0_VPM_DIS          0x00000001
+#define CAP_CONFIG0_ETH_PHY0_DIS     0x00000002
+#define CAP_CONFIG0_ETH_PHY1_DIS     0x00000004
+#define CAP_CONFIG0_ETH_GMII0_DIS    0x00000008
+#define CAP_CONFIG0_ETH_GMII1_DIS    0x00000010
+#define CAP_CONFIG0_ETH_SGMII0_DIS   0x00000020
+#define CAP_CONFIG0_ETH_SGMII1_DIS   0x00000040
+#define CAP_CONFIG0_USB0_DIS         0x00000080
+#define CAP_CONFIG0_USB1_DIS         0x00000100
+#define CAP_CONFIG0_TSC_DIS          0x00000200
+#define CAP_CONFIG0_EHSS0_DIS        0x00000400
+#define CAP_CONFIG0_EHSS1_DIS        0x00000800
+#define CAP_CONFIG0_SDIO0_DIS        0x00001000
+#define CAP_CONFIG0_SDIO1_DIS        0x00002000
+#define CAP_CONFIG0_UARTB_DIS        0x00004000
+#define CAP_CONFIG0_KEYPAD_DIS       0x00008000
+#define CAP_CONFIG0_CLCD_DIS         0x00010000
+#define CAP_CONFIG0_GE_DIS           0x00020000
+#define CAP_CONFIG0_LEDM_DIS         0x00040000
+#define CAP_CONFIG0_BBL_DIS          0x00080000
+#define CAP_CONFIG0_VDEC_DIS         0x00100000
+#define CAP_CONFIG0_PIF_DIS          0x00200000
+#define CAP_CONFIG0_RESERVED1_DIS    0x00400000
+#define CAP_CONFIG0_RESERVED2_DIS    0x00800000
+
+#define CAP_CONFIG1_APMA_DIS         0x00000001
+#define CAP_CONFIG1_APMB_DIS         0x00000002
+#define CAP_CONFIG1_APMC_DIS         0x00000004
+#define CAP_CONFIG1_CLCD_RES_MASK    0x00000600
+#define CAP_CONFIG1_CLCD_RES_SHIFT   9
+#define CAP_CONFIG1_CLCD_RES_WVGA    (CAP_LCD_WVGA << CAP_CONFIG1_CLCD_RES_SHIFT)
+#define CAP_CONFIG1_CLCD_RES_VGA     (CAP_LCD_VGA << CAP_CONFIG1_CLCD_RES_SHIFT)
+#define CAP_CONFIG1_CLCD_RES_WQVGA   (CAP_LCD_WQVGA << CAP_CONFIG1_CLCD_RES_SHIFT)
+#define CAP_CONFIG1_CLCD_RES_QVGA    (CAP_LCD_QVGA << CAP_CONFIG1_CLCD_RES_SHIFT)
+
+#define CAP_CONFIG2_SPU_DIS          0x00000010
+#define CAP_CONFIG2_PKA_DIS          0x00000020
+#define CAP_CONFIG2_RNG_DIS          0x00000080
+
+#if   (CFG_GLOBAL_CHIP == BCM11107)
+#define capConfig0 0
+#define capConfig1 CAP_CONFIG1_CLCD_RES_WVGA
+#define capConfig2 0
+#define CAP_APM_MAX_NUM_CHANS 3
+#elif (CFG_GLOBAL_CHIP == FPGA11107)
+#define capConfig0 0
+#define capConfig1 CAP_CONFIG1_CLCD_RES_WVGA
+#define capConfig2 0
+#define CAP_APM_MAX_NUM_CHANS 3
+#elif (CFG_GLOBAL_CHIP == BCM11109)
+#define capConfig0 (CAP_CONFIG0_USB1_DIS | CAP_CONFIG0_EHSS1_DIS | CAP_CONFIG0_SDIO1_DIS | CAP_CONFIG0_GE_DIS | CAP_CONFIG0_BBL_DIS | CAP_CONFIG0_VDEC_DIS)
+#define capConfig1 (CAP_CONFIG1_APMC_DIS | CAP_CONFIG1_CLCD_RES_WQVGA)
+#define capConfig2 (CAP_CONFIG2_SPU_DIS | CAP_CONFIG2_PKA_DIS)
+#define CAP_APM_MAX_NUM_CHANS 2
+#elif (CFG_GLOBAL_CHIP == BCM11170)
+#define capConfig0 (CAP_CONFIG0_ETH_GMII0_DIS | CAP_CONFIG0_ETH_GMII1_DIS | CAP_CONFIG0_USB0_DIS | CAP_CONFIG0_USB1_DIS | CAP_CONFIG0_TSC_DIS | CAP_CONFIG0_EHSS1_DIS | CAP_CONFIG0_SDIO0_DIS | CAP_CONFIG0_SDIO1_DIS | CAP_CONFIG0_UARTB_DIS | CAP_CONFIG0_CLCD_DIS | CAP_CONFIG0_GE_DIS | CAP_CONFIG0_BBL_DIS | CAP_CONFIG0_VDEC_DIS)
+#define capConfig1 (CAP_CONFIG1_APMC_DIS | CAP_CONFIG1_CLCD_RES_WQVGA)
+#define capConfig2 (CAP_CONFIG2_SPU_DIS | CAP_CONFIG2_PKA_DIS)
+#define CAP_APM_MAX_NUM_CHANS 2
+#elif (CFG_GLOBAL_CHIP == BCM11110)
+#define capConfig0 (CAP_CONFIG0_USB1_DIS | CAP_CONFIG0_TSC_DIS | CAP_CONFIG0_EHSS1_DIS | CAP_CONFIG0_SDIO0_DIS | CAP_CONFIG0_SDIO1_DIS | CAP_CONFIG0_UARTB_DIS | CAP_CONFIG0_GE_DIS | CAP_CONFIG0_BBL_DIS | CAP_CONFIG0_VDEC_DIS)
+#define capConfig1 CAP_CONFIG1_APMC_DIS
+#define capConfig2 (CAP_CONFIG2_SPU_DIS | CAP_CONFIG2_PKA_DIS)
+#define CAP_APM_MAX_NUM_CHANS 2
+#elif (CFG_GLOBAL_CHIP == BCM11211)
+#define capConfig0 (CAP_CONFIG0_ETH_PHY0_DIS | CAP_CONFIG0_ETH_GMII0_DIS | CAP_CONFIG0_ETH_GMII1_DIS | CAP_CONFIG0_ETH_SGMII0_DIS | CAP_CONFIG0_ETH_SGMII1_DIS | CAP_CONFIG0_CLCD_DIS)
+#define capConfig1 CAP_CONFIG1_APMC_DIS
+#define capConfig2 0
+#define CAP_APM_MAX_NUM_CHANS 2
+#else
+#error CFG_GLOBAL_CHIP type capabilities not defined
+#endif
+
+#if   ((CFG_GLOBAL_CHIP == BCM11107) || (CFG_GLOBAL_CHIP == FPGA11107))
+#define CAP_HW_CFG_ARM_CLK_HZ 500000000
+#elif ((CFG_GLOBAL_CHIP == BCM11109) || (CFG_GLOBAL_CHIP == BCM11170) || (CFG_GLOBAL_CHIP == BCM11110))
+#define CAP_HW_CFG_ARM_CLK_HZ 300000000
+#elif (CFG_GLOBAL_CHIP == BCM11211)
+#define CAP_HW_CFG_ARM_CLK_HZ 666666666
+#else
+#error CFG_GLOBAL_CHIP type capabilities not defined
+#endif
+
+#if ((CFG_GLOBAL_CHIP == BCM11107) || (CFG_GLOBAL_CHIP == BCM11211) || (CFG_GLOBAL_CHIP == FPGA11107))
+#define CAP_HW_CFG_VPM_CLK_HZ 333333333
+#elif ((CFG_GLOBAL_CHIP == BCM11109) || (CFG_GLOBAL_CHIP == BCM11170) || (CFG_GLOBAL_CHIP == BCM11110))
+#define CAP_HW_CFG_VPM_CLK_HZ 200000000
+#else
+#error CFG_GLOBAL_CHIP type capabilities not defined
+#endif
+
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+/****************************************************************************
+*  cap_isPresent -
+*
+*  PURPOSE:
+*     Determines if the chip has a certain capability present
+*
+*  PARAMETERS:
+*     capability - type of capability to determine if present
+*
+*  RETURNS:
+*     CAP_PRESENT or CAP_NOT_PRESENT
+****************************************************************************/
+static inline CAP_RC_T cap_isPresent(CAP_CAPABILITY_T capability, int index)
+{
+	CAP_RC_T returnVal = CAP_NOT_PRESENT;
+
+	switch (capability) {
+	case CAP_VPM:
+		{
+			if (!(capConfig0 & CAP_CONFIG0_VPM_DIS)) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_ETH_PHY:
+		{
+			if ((index == 0)
+			    && (!(capConfig0 & CAP_CONFIG0_ETH_PHY0_DIS))) {
+				returnVal = CAP_PRESENT;
+			}
+			if ((index == 1)
+			    && (!(capConfig0 & CAP_CONFIG0_ETH_PHY1_DIS))) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_ETH_GMII:
+		{
+			if ((index == 0)
+			    && (!(capConfig0 & CAP_CONFIG0_ETH_GMII0_DIS))) {
+				returnVal = CAP_PRESENT;
+			}
+			if ((index == 1)
+			    && (!(capConfig0 & CAP_CONFIG0_ETH_GMII1_DIS))) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_ETH_SGMII:
+		{
+			if ((index == 0)
+			    && (!(capConfig0 & CAP_CONFIG0_ETH_SGMII0_DIS))) {
+				returnVal = CAP_PRESENT;
+			}
+			if ((index == 1)
+			    && (!(capConfig0 & CAP_CONFIG0_ETH_SGMII1_DIS))) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_USB:
+		{
+			if ((index == 0)
+			    && (!(capConfig0 & CAP_CONFIG0_USB0_DIS))) {
+				returnVal = CAP_PRESENT;
+			}
+			if ((index == 1)
+			    && (!(capConfig0 & CAP_CONFIG0_USB1_DIS))) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_TSC:
+		{
+			if (!(capConfig0 & CAP_CONFIG0_TSC_DIS)) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_EHSS:
+		{
+			if ((index == 0)
+			    && (!(capConfig0 & CAP_CONFIG0_EHSS0_DIS))) {
+				returnVal = CAP_PRESENT;
+			}
+			if ((index == 1)
+			    && (!(capConfig0 & CAP_CONFIG0_EHSS1_DIS))) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_SDIO:
+		{
+			if ((index == 0)
+			    && (!(capConfig0 & CAP_CONFIG0_SDIO0_DIS))) {
+				returnVal = CAP_PRESENT;
+			}
+			if ((index == 1)
+			    && (!(capConfig0 & CAP_CONFIG0_SDIO1_DIS))) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_UARTB:
+		{
+			if (!(capConfig0 & CAP_CONFIG0_UARTB_DIS)) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_KEYPAD:
+		{
+			if (!(capConfig0 & CAP_CONFIG0_KEYPAD_DIS)) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_CLCD:
+		{
+			if (!(capConfig0 & CAP_CONFIG0_CLCD_DIS)) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_GE:
+		{
+			if (!(capConfig0 & CAP_CONFIG0_GE_DIS)) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_LEDM:
+		{
+			if (!(capConfig0 & CAP_CONFIG0_LEDM_DIS)) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_BBL:
+		{
+			if (!(capConfig0 & CAP_CONFIG0_BBL_DIS)) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_VDEC:
+		{
+			if (!(capConfig0 & CAP_CONFIG0_VDEC_DIS)) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_PIF:
+		{
+			if (!(capConfig0 & CAP_CONFIG0_PIF_DIS)) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_APM:
+		{
+			if ((index == 0)
+			    && (!(capConfig1 & CAP_CONFIG1_APMA_DIS))) {
+				returnVal = CAP_PRESENT;
+			}
+			if ((index == 1)
+			    && (!(capConfig1 & CAP_CONFIG1_APMB_DIS))) {
+				returnVal = CAP_PRESENT;
+			}
+			if ((index == 2)
+			    && (!(capConfig1 & CAP_CONFIG1_APMC_DIS))) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_SPU:
+		{
+			if (!(capConfig2 & CAP_CONFIG2_SPU_DIS)) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_PKA:
+		{
+			if (!(capConfig2 & CAP_CONFIG2_PKA_DIS)) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	case CAP_RNG:
+		{
+			if (!(capConfig2 & CAP_CONFIG2_RNG_DIS)) {
+				returnVal = CAP_PRESENT;
+			}
+		}
+		break;
+
+	default:
+		{
+		}
+		break;
+	}
+	return returnVal;
+}
+
+/****************************************************************************
+*  cap_getMaxArmSpeedHz -
+*
+*  PURPOSE:
+*     Determines the maximum speed of the ARM CPU
+*
+*  PARAMETERS:
+*     none
+*
+*  RETURNS:
+*     clock speed in Hz that the ARM processor is able to run at
+****************************************************************************/
+static inline uint32_t cap_getMaxArmSpeedHz(void)
+{
+#if   ((CFG_GLOBAL_CHIP == BCM11107) || (CFG_GLOBAL_CHIP == FPGA11107))
+	return 500000000;
+#elif ((CFG_GLOBAL_CHIP == BCM11109) || (CFG_GLOBAL_CHIP == BCM11170) || (CFG_GLOBAL_CHIP == BCM11110))
+	return 300000000;
+#elif (CFG_GLOBAL_CHIP == BCM11211)
+	return 666666666;
+#else
+#error CFG_GLOBAL_CHIP type capabilities not defined
+#endif
+}
+
+/****************************************************************************
+*  cap_getMaxVpmSpeedHz -
+*
+*  PURPOSE:
+*     Determines the maximum speed of the VPM
+*
+*  PARAMETERS:
+*     none
+*
+*  RETURNS:
+*     clock speed in Hz that the VPM is able to run at
+****************************************************************************/
+static inline uint32_t cap_getMaxVpmSpeedHz(void)
+{
+#if ((CFG_GLOBAL_CHIP == BCM11107) || (CFG_GLOBAL_CHIP == BCM11211) || (CFG_GLOBAL_CHIP == FPGA11107))
+	return 333333333;
+#elif ((CFG_GLOBAL_CHIP == BCM11109) || (CFG_GLOBAL_CHIP == BCM11170) || (CFG_GLOBAL_CHIP == BCM11110))
+	return 200000000;
+#else
+#error CFG_GLOBAL_CHIP type capabilities not defined
+#endif
+}
+
+/****************************************************************************
+*  cap_getMaxLcdRes -
+*
+*  PURPOSE:
+*     Determines the maximum LCD resolution capabilities
+*
+*  PARAMETERS:
+*     none
+*
+*  RETURNS:
+*   CAP_LCD_WVGA, CAP_LCD_VGA, CAP_LCD_WQVGA or CAP_LCD_QVGA
+*
+****************************************************************************/
+static inline CAP_LCD_RES_T cap_getMaxLcdRes(void)
+{
+	return (CAP_LCD_RES_T)
+		((capConfig1 & CAP_CONFIG1_CLCD_RES_MASK) >>
+		 CAP_CONFIG1_CLCD_RES_SHIFT);
+}
+
+#endif
diff --git a/arch/arm/mach-bcmring/include/mach/csp/hw_cfg.h b/arch/arm/mach-bcmring/include/mach/csp/hw_cfg.h
new file mode 100644
index 00000000000..cfa91bed9d3
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/hw_cfg.h
@@ -0,0 +1,73 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+
+#ifndef CSP_HW_CFG_H
+#define CSP_HW_CFG_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <cfg_global.h>
+#include <mach/csp/cap_inline.h>
+
+#if defined(__KERNEL__)
+#include <mach/memory_settings.h>
+#else
+#include <hw_cfg.h>
+#endif
+
+/* Some items that can be defined externally, but will be set to default values */
+/* if they are not defined. */
+/*      HW_CFG_PLL_SPREAD_SPECTRUM_DISABLE   Default undefined and SS is enabled. */
+/*      HW_CFG_SDRAM_CAS_LATENCY        5    Default 5, Values [3..6] */
+/*      HW_CFG_SDRAM_CHIP_SELECT_CNT    1    Default 1, Vaules [1..2] */
+/*      HW_CFG_SDRAM_SPEED_GRADE        667  Default 667, Values [400,533,667,800] */
+/*      HW_CFG_SDRAM_WIDTH_BITS         16   Default 16, Vaules [8,16] */
+/*      HW_CFG_SDRAM_ADDR_BRC                Default undefined and Row-Bank-Col (RBC) addressing used. Define to use Bank-Row-Col (BRC). */
+/*      HW_CFG_SDRAM_CLK_ASYNC               Default undefined and DDR clock is synchronous with AXI BUS clock. Define for ASYNC mode. */
+
+#if defined(CFG_GLOBAL_CHIP)
+  #if (CFG_GLOBAL_CHIP == FPGA11107)
+     #define HW_CFG_BUS_CLK_HZ            5000000
+     #define HW_CFG_DDR_CTLR_CLK_HZ      10000000
+     #define HW_CFG_DDR_PHY_OMIT
+     #define HW_CFG_UART_CLK_HZ           7500000
+  #else
+     #define HW_CFG_PLL_VCO_HZ           2000000000
+     #define HW_CFG_PLL2_VCO_HZ          1800000000
+     #define HW_CFG_ARM_CLK_HZ            CAP_HW_CFG_ARM_CLK_HZ
+     #define HW_CFG_BUS_CLK_HZ            166666666
+     #define HW_CFG_DDR_CTLR_CLK_HZ       333333333
+     #define HW_CFG_DDR_PHY_CLK_HZ        (2 * HW_CFG_DDR_CTLR_CLK_HZ)
+     #define HW_CFG_UART_CLK_HZ           142857142
+     #define HW_CFG_VPM_CLK_HZ            CAP_HW_CFG_VPM_CLK_HZ
+  #endif
+#else
+   #define HW_CFG_PLL_VCO_HZ           1800000000
+   #define HW_CFG_PLL2_VCO_HZ          1800000000
+   #define HW_CFG_ARM_CLK_HZ            450000000
+   #define HW_CFG_BUS_CLK_HZ            150000000
+   #define HW_CFG_DDR_CTLR_CLK_HZ       300000000
+   #define HW_CFG_DDR_PHY_CLK_HZ        (2 * HW_CFG_DDR_CTLR_CLK_HZ)
+   #define HW_CFG_UART_CLK_HZ           150000000
+   #define HW_CFG_VPM_CLK_HZ            300000000
+#endif
+
+/* ---- Public Constants and Types --------------------------------------- */
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+
+#endif /* CSP_HW_CFG_H */
+
-- 
cgit v1.2.3


From 9133760f4b0c0628d45532aad17f59896cd7b57f Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Fri, 7 Aug 2009 20:03:40 +0100
Subject: ARM: 5652/1: bcmring: add misc headers for csp code

add misc wrapper headers for csp code
add ddrc register header file

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-bcmring/include/csp/cache.h        |  35 +
 arch/arm/mach-bcmring/include/csp/delay.h        |  36 +
 arch/arm/mach-bcmring/include/csp/errno.h        |  32 +
 arch/arm/mach-bcmring/include/csp/module.h       |  32 +
 arch/arm/mach-bcmring/include/csp/reg.h          | 114 +++
 arch/arm/mach-bcmring/include/csp/stdint.h       |  30 +
 arch/arm/mach-bcmring/include/csp/string.h       |  34 +
 arch/arm/mach-bcmring/include/mach/csp/ddrcReg.h | 872 +++++++++++++++++++++++
 8 files changed, 1185 insertions(+)
 create mode 100644 arch/arm/mach-bcmring/include/csp/cache.h
 create mode 100644 arch/arm/mach-bcmring/include/csp/delay.h
 create mode 100644 arch/arm/mach-bcmring/include/csp/errno.h
 create mode 100644 arch/arm/mach-bcmring/include/csp/module.h
 create mode 100644 arch/arm/mach-bcmring/include/csp/reg.h
 create mode 100644 arch/arm/mach-bcmring/include/csp/stdint.h
 create mode 100644 arch/arm/mach-bcmring/include/csp/string.h
 create mode 100644 arch/arm/mach-bcmring/include/mach/csp/ddrcReg.h

(limited to 'arch')

diff --git a/arch/arm/mach-bcmring/include/csp/cache.h b/arch/arm/mach-bcmring/include/csp/cache.h
new file mode 100644
index 00000000000..caa20e59db9
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/cache.h
@@ -0,0 +1,35 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef CSP_CACHE_H
+#define CSP_CACHE_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <csp/stdint.h>
+
+/* ---- Public Constants and Types --------------------------------------- */
+
+#if defined(__KERNEL__) && !defined(STANDALONE)
+#include <asm/cacheflush.h>
+
+#define CSP_CACHE_FLUSH_ALL      flush_cache_all()
+
+#else
+
+#define CSP_CACHE_FLUSH_ALL
+
+#endif
+
+#endif /* CSP_CACHE_H */
diff --git a/arch/arm/mach-bcmring/include/csp/delay.h b/arch/arm/mach-bcmring/include/csp/delay.h
new file mode 100644
index 00000000000..8b3d8036729
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/delay.h
@@ -0,0 +1,36 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+
+#ifndef CSP_DELAY_H
+#define CSP_DELAY_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+/* Some CSP routines require use of the following delay routines. Use the OS */
+/* version if available, otherwise use a CSP specific definition. */
+/* void udelay(unsigned long usecs); */
+/* void mdelay(unsigned long msecs); */
+
+#if defined(__KERNEL__) && !defined(STANDALONE)
+   #include <linux/delay.h>
+#else
+   #include <mach/csp/delay.h>
+#endif
+
+/* ---- Public Constants and Types --------------------------------------- */
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+#endif /*  CSP_DELAY_H */
diff --git a/arch/arm/mach-bcmring/include/csp/errno.h b/arch/arm/mach-bcmring/include/csp/errno.h
new file mode 100644
index 00000000000..51357dd5b66
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/errno.h
@@ -0,0 +1,32 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef CSP_ERRNO_H
+#define CSP_ERRNO_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#if   defined(__KERNEL__)
+#include <linux/errno.h>
+#elif defined(CSP_SIMULATION)
+#include <asm-generic/errno.h>
+#else
+#include <errno.h>
+#endif
+
+/* ---- Public Constants and Types --------------------------------------- */
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+#endif /* CSP_ERRNO_H */
diff --git a/arch/arm/mach-bcmring/include/csp/module.h b/arch/arm/mach-bcmring/include/csp/module.h
new file mode 100644
index 00000000000..c30d2a5975a
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/module.h
@@ -0,0 +1,32 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+
+#ifndef CSP_MODULE_H
+#define CSP_MODULE_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#ifdef __KERNEL__
+    #include <linux/module.h>
+#else
+    #define EXPORT_SYMBOL(symbol)
+#endif
+
+/* ---- Public Constants and Types --------------------------------------- */
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+
+#endif /* CSP_MODULE_H */
diff --git a/arch/arm/mach-bcmring/include/csp/reg.h b/arch/arm/mach-bcmring/include/csp/reg.h
new file mode 100644
index 00000000000..e5f60bf5a1f
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/reg.h
@@ -0,0 +1,114 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    reg.h
+*
+*  @brief   Generic register defintions used in CSP
+*/
+/****************************************************************************/
+
+#ifndef CSP_REG_H
+#define CSP_REG_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <csp/stdint.h>
+
+/* ---- Public Constants and Types --------------------------------------- */
+
+#define __REG32(x)      (*((volatile uint32_t *)(x)))
+#define __REG16(x)      (*((volatile uint16_t *)(x)))
+#define __REG8(x)       (*((volatile uint8_t *) (x)))
+
+/* Macros used to define a sequence of reserved registers. The start / end */
+/* are byte offsets in the particular register definition, with the "end" */
+/* being the offset of the next un-reserved register. E.g. if offsets */
+/* 0x10 through to 0x1f are reserved, then this reserved area could be */
+/* specified as follows. */
+/*  typedef struct */
+/*  { */
+/*      uint32_t reg1;           offset 0x00 */
+/*      uint32_t reg2;           offset 0x04 */
+/*      uint32_t reg3;           offset 0x08 */
+/*      uint32_t reg4;           offset 0x0c */
+/*      REG32_RSVD(0x10, 0x20); */
+/*      uint32_t reg5;           offset 0x20 */
+/*      ... */
+/*  } EXAMPLE_REG_t; */
+#define REG8_RSVD(start, end)   uint8_t rsvd_##start[(end - start) / sizeof(uint8_t)]
+#define REG16_RSVD(start, end)  uint16_t rsvd_##start[(end - start) / sizeof(uint16_t)]
+#define REG32_RSVD(start, end)  uint32_t rsvd_##start[(end - start) / sizeof(uint32_t)]
+
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+/* Note: When protecting multiple statements, the REG_LOCAL_IRQ_SAVE and */
+/* REG_LOCAL_IRQ_RESTORE must be enclosed in { } to allow the  */
+/* flags variable to be declared locally. */
+/* e.g. */
+/*    statement1; */
+/*    { */
+/*       REG_LOCAL_IRQ_SAVE; */
+/*       <multiple statements here> */
+/*       REG_LOCAL_IRQ_RESTORE; */
+/*    } */
+/*    statement2; */
+/*  */
+
+#if defined(__KERNEL__) && !defined(STANDALONE)
+#include <mach/hardware.h>
+#include <linux/interrupt.h>
+
+#define REG_LOCAL_IRQ_SAVE      HW_DECLARE_SPINLOCK(reg32) \
+	unsigned long flags; HW_IRQ_SAVE(reg32, flags)
+
+#define REG_LOCAL_IRQ_RESTORE   HW_IRQ_RESTORE(reg32, flags)
+
+#else
+
+#define REG_LOCAL_IRQ_SAVE
+#define REG_LOCAL_IRQ_RESTORE
+
+#endif
+
+static inline void reg32_modify_and(volatile uint32_t *reg, uint32_t value)
+{
+	REG_LOCAL_IRQ_SAVE;
+	*reg &= value;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+static inline void reg32_modify_or(volatile uint32_t *reg, uint32_t value)
+{
+	REG_LOCAL_IRQ_SAVE;
+	*reg |= value;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+static inline void reg32_modify_mask(volatile uint32_t *reg, uint32_t mask,
+				     uint32_t value)
+{
+	REG_LOCAL_IRQ_SAVE;
+	*reg = (*reg & mask) | value;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+static inline void reg32_write(volatile uint32_t *reg, uint32_t value)
+{
+	*reg = value;
+}
+
+#endif /* CSP_REG_H */
diff --git a/arch/arm/mach-bcmring/include/csp/stdint.h b/arch/arm/mach-bcmring/include/csp/stdint.h
new file mode 100644
index 00000000000..3a8718bbf70
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/stdint.h
@@ -0,0 +1,30 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef CSP_STDINT_H
+#define CSP_STDINT_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+#else
+#include <stdint.h>
+#endif
+
+/* ---- Public Constants and Types --------------------------------------- */
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+#endif /* CSP_STDINT_H */
diff --git a/arch/arm/mach-bcmring/include/csp/string.h b/arch/arm/mach-bcmring/include/csp/string.h
new file mode 100644
index 00000000000..ad9e4005f14
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/string.h
@@ -0,0 +1,34 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+
+
+#ifndef CSP_STRING_H
+#define CSP_STRING_H
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#ifdef __KERNEL__
+   #include <linux/string.h>
+#else
+   #include <string.h>
+#endif
+
+/* ---- Public Constants and Types --------------------------------------- */
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+
+#endif /* CSP_STRING_H */
+
diff --git a/arch/arm/mach-bcmring/include/mach/csp/ddrcReg.h b/arch/arm/mach-bcmring/include/mach/csp/ddrcReg.h
new file mode 100644
index 00000000000..f1b68e26fa6
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/ddrcReg.h
@@ -0,0 +1,872 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    ddrcReg.h
+*
+*  @brief   Register definitions for BCMRING DDR2 Controller and PHY
+*
+*/
+/****************************************************************************/
+
+#ifndef DDRC_REG_H
+#define DDRC_REG_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <csp/reg.h>
+#include <csp/stdint.h>
+
+#include <mach/csp/mm_io.h>
+
+/* ---- Public Constants and Types --------------------------------------- */
+
+/*********************************************************************/
+/* DDR2 Controller (ARM PL341) register definitions */
+/*********************************************************************/
+
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+/* ARM PL341 DDR2 configuration registers, offset 0x000 */
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+
+	typedef struct {
+		uint32_t memcStatus;
+		uint32_t memcCmd;
+		uint32_t directCmd;
+		uint32_t memoryCfg;
+		uint32_t refreshPrd;
+		uint32_t casLatency;
+		uint32_t writeLatency;
+		uint32_t tMrd;
+		uint32_t tRas;
+		uint32_t tRc;
+		uint32_t tRcd;
+		uint32_t tRfc;
+		uint32_t tRp;
+		uint32_t tRrd;
+		uint32_t tWr;
+		uint32_t tWtr;
+		uint32_t tXp;
+		uint32_t tXsr;
+		uint32_t tEsr;
+		uint32_t memoryCfg2;
+		uint32_t memoryCfg3;
+		uint32_t tFaw;
+	} ddrcReg_CTLR_MEMC_REG_t;
+
+#define ddrcReg_CTLR_MEMC_REG_OFFSET                    0x0000
+#define ddrcReg_CTLR_MEMC_REGP                          ((volatile ddrcReg_CTLR_MEMC_REG_t *)  (MM_IO_BASE_DDRC + ddrcReg_CTLR_MEMC_REG_OFFSET))
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_MEMC_STATUS_BANKS_MASK             (0x3 << 12)
+#define ddrcReg_CTLR_MEMC_STATUS_BANKS_4                (0x0 << 12)
+#define ddrcReg_CTLR_MEMC_STATUS_BANKS_8                (0x3 << 12)
+
+#define ddrcReg_CTLR_MEMC_STATUS_MONITORS_MASK          (0x3 << 10)
+#define ddrcReg_CTLR_MEMC_STATUS_MONITORS_0             (0x0 << 10)
+#define ddrcReg_CTLR_MEMC_STATUS_MONITORS_1             (0x1 << 10)
+#define ddrcReg_CTLR_MEMC_STATUS_MONITORS_2             (0x2 << 10)
+#define ddrcReg_CTLR_MEMC_STATUS_MONITORS_4             (0x3 << 10)
+
+#define ddrcReg_CTLR_MEMC_STATUS_CHIPS_MASK             (0x3 << 7)
+#define ddrcReg_CTLR_MEMC_STATUS_CHIPS_1                (0x0 << 7)
+#define ddrcReg_CTLR_MEMC_STATUS_CHIPS_2                (0x1 << 7)
+#define ddrcReg_CTLR_MEMC_STATUS_CHIPS_3                (0x2 << 7)
+#define ddrcReg_CTLR_MEMC_STATUS_CHIPS_4                (0x3 << 7)
+
+#define ddrcReg_CTLR_MEMC_STATUS_TYPE_MASK              (0x7 << 4)
+#define ddrcReg_CTLR_MEMC_STATUS_TYPE_DDR2              (0x5 << 4)
+
+#define ddrcReg_CTLR_MEMC_STATUS_WIDTH_MASK             (0x3 << 2)
+#define ddrcReg_CTLR_MEMC_STATUS_WIDTH_16               (0x0 << 2)
+#define ddrcReg_CTLR_MEMC_STATUS_WIDTH_32               (0x1 << 2)
+#define ddrcReg_CTLR_MEMC_STATUS_WIDTH_64               (0x2 << 2)
+#define ddrcReg_CTLR_MEMC_STATUS_WIDTH_128              (0x3 << 2)
+
+#define ddrcReg_CTLR_MEMC_STATUS_STATE_MASK             (0x3 << 0)
+#define ddrcReg_CTLR_MEMC_STATUS_STATE_CONFIG           (0x0 << 0)
+#define ddrcReg_CTLR_MEMC_STATUS_STATE_READY            (0x1 << 0)
+#define ddrcReg_CTLR_MEMC_STATUS_STATE_PAUSED           (0x2 << 0)
+#define ddrcReg_CTLR_MEMC_STATUS_STATE_LOWPWR           (0x3 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_MEMC_CMD_MASK                      (0x7 << 0)
+#define ddrcReg_CTLR_MEMC_CMD_GO                        (0x0 << 0)
+#define ddrcReg_CTLR_MEMC_CMD_SLEEP                     (0x1 << 0)
+#define ddrcReg_CTLR_MEMC_CMD_WAKEUP                    (0x2 << 0)
+#define ddrcReg_CTLR_MEMC_CMD_PAUSE                     (0x3 << 0)
+#define ddrcReg_CTLR_MEMC_CMD_CONFIGURE                 (0x4 << 0)
+#define ddrcReg_CTLR_MEMC_CMD_ACTIVE_PAUSE              (0x7 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_DIRECT_CMD_CHIP_SHIFT              20
+#define ddrcReg_CTLR_DIRECT_CMD_CHIP_MASK               (0x3 << ddrcReg_CTLR_DIRECT_CMD_CHIP_SHIFT)
+
+#define ddrcReg_CTLR_DIRECT_CMD_TYPE_PRECHARGEALL       (0x0 << 18)
+#define ddrcReg_CTLR_DIRECT_CMD_TYPE_AUTOREFRESH        (0x1 << 18)
+#define ddrcReg_CTLR_DIRECT_CMD_TYPE_MODEREG            (0x2 << 18)
+#define ddrcReg_CTLR_DIRECT_CMD_TYPE_NOP                (0x3 << 18)
+
+#define ddrcReg_CTLR_DIRECT_CMD_BANK_SHIFT              16
+#define ddrcReg_CTLR_DIRECT_CMD_BANK_MASK               (0x3 << ddrcReg_CTLR_DIRECT_CMD_BANK_SHIFT)
+
+#define ddrcReg_CTLR_DIRECT_CMD_ADDR_SHIFT              0
+#define ddrcReg_CTLR_DIRECT_CMD_ADDR_MASK               (0x1ffff << ddrcReg_CTLR_DIRECT_CMD_ADDR_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_MEMORY_CFG_CHIP_CNT_MASK           (0x3 << 21)
+#define ddrcReg_CTLR_MEMORY_CFG_CHIP_CNT_1              (0x0 << 21)
+#define ddrcReg_CTLR_MEMORY_CFG_CHIP_CNT_2              (0x1 << 21)
+#define ddrcReg_CTLR_MEMORY_CFG_CHIP_CNT_3              (0x2 << 21)
+#define ddrcReg_CTLR_MEMORY_CFG_CHIP_CNT_4              (0x3 << 21)
+
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_MASK           (0x7 << 18)
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_3_0            (0x0 << 18)
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_4_1            (0x1 << 18)
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_5_2            (0x2 << 18)
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_6_3            (0x3 << 18)
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_7_4            (0x4 << 18)
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_8_5            (0x5 << 18)
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_9_6            (0x6 << 18)
+#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_10_7           (0x7 << 18)
+
+#define ddrcReg_CTLR_MEMORY_CFG_BURST_LEN_MASK          (0x7 << 15)
+#define ddrcReg_CTLR_MEMORY_CFG_BURST_LEN_4             (0x2 << 15)
+#define ddrcReg_CTLR_MEMORY_CFG_BURST_LEN_8             (0x3 << 15)	/* @note Not supported in PL341 */
+
+#define ddrcReg_CTLR_MEMORY_CFG_PWRDOWN_ENABLE          (0x1 << 13)
+
+#define ddrcReg_CTLR_MEMORY_CFG_PWRDOWN_CYCLES_SHIFT    7
+#define ddrcReg_CTLR_MEMORY_CFG_PWRDOWN_CYCLES_MASK     (0x3f << ddrcReg_CTLR_MEMORY_CFG_PWRDOWN_CYCLES_SHIFT)
+
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_MASK       (0x7 << 3)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_11         (0x0 << 3)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_12         (0x1 << 3)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_13         (0x2 << 3)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_14         (0x3 << 3)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_15         (0x4 << 3)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_16         (0x5 << 3)
+
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_COL_BITS_MASK       (0x7 << 0)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_COL_BITS_9          (0x1 << 0)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_COL_BITS_10         (0x2 << 0)
+#define ddrcReg_CTLR_MEMORY_CFG_AXI_COL_BITS_11         (0x3 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_REFRESH_PRD_SHIFT                  0
+#define ddrcReg_CTLR_REFRESH_PRD_MASK                   (0x7fff << ddrcReg_CTLR_REFRESH_PRD_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_CAS_LATENCY_SHIFT                  1
+#define ddrcReg_CTLR_CAS_LATENCY_MASK                   (0x7 << ddrcReg_CTLR_CAS_LATENCY_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_WRITE_LATENCY_SHIFT                0
+#define ddrcReg_CTLR_WRITE_LATENCY_MASK                 (0x7 << ddrcReg_CTLR_WRITE_LATENCY_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_MRD_SHIFT                        0
+#define ddrcReg_CTLR_T_MRD_MASK                         (0x7f << ddrcReg_CTLR_T_MRD_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_RAS_SHIFT                        0
+#define ddrcReg_CTLR_T_RAS_MASK                         (0x1f << ddrcReg_CTLR_T_RAS_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_RC_SHIFT                         0
+#define ddrcReg_CTLR_T_RC_MASK                          (0x1f << ddrcReg_CTLR_T_RC_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_RCD_SCHEDULE_DELAY_SHIFT         8
+#define ddrcReg_CTLR_T_RCD_SCHEDULE_DELAY_MASK          (0x7 << ddrcReg_CTLR_T_RCD_SCHEDULE_DELAY_SHIFT)
+
+#define ddrcReg_CTLR_T_RCD_SHIFT                        0
+#define ddrcReg_CTLR_T_RCD_MASK                         (0x7 << ddrcReg_CTLR_T_RCD_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_RFC_SCHEDULE_DELAY_SHIFT         8
+#define ddrcReg_CTLR_T_RFC_SCHEDULE_DELAY_MASK          (0x7f << ddrcReg_CTLR_T_RFC_SCHEDULE_DELAY_SHIFT)
+
+#define ddrcReg_CTLR_T_RFC_SHIFT                        0
+#define ddrcReg_CTLR_T_RFC_MASK                         (0x7f << ddrcReg_CTLR_T_RFC_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_RP_SCHEDULE_DELAY_SHIFT          8
+#define ddrcReg_CTLR_T_RP_SCHEDULE_DELAY_MASK           (0x7 << ddrcReg_CTLR_T_RP_SCHEDULE_DELAY_SHIFT)
+
+#define ddrcReg_CTLR_T_RP_SHIFT                         0
+#define ddrcReg_CTLR_T_RP_MASK                          (0xf << ddrcReg_CTLR_T_RP_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_RRD_SHIFT                        0
+#define ddrcReg_CTLR_T_RRD_MASK                         (0xf << ddrcReg_CTLR_T_RRD_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_WR_SHIFT                         0
+#define ddrcReg_CTLR_T_WR_MASK                          (0x7 << ddrcReg_CTLR_T_WR_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_WTR_SHIFT                        0
+#define ddrcReg_CTLR_T_WTR_MASK                         (0x7 << ddrcReg_CTLR_T_WTR_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_XP_SHIFT                         0
+#define ddrcReg_CTLR_T_XP_MASK                          (0xff << ddrcReg_CTLR_T_XP_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_XSR_SHIFT                        0
+#define ddrcReg_CTLR_T_XSR_MASK                         (0xff << ddrcReg_CTLR_T_XSR_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_ESR_SHIFT                        0
+#define ddrcReg_CTLR_T_ESR_MASK                         (0xff << ddrcReg_CTLR_T_ESR_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_MEMORY_CFG2_WIDTH_MASK             (0x3 << 6)
+#define ddrcReg_CTLR_MEMORY_CFG2_WIDTH_16BITS           (0 << 6)
+#define ddrcReg_CTLR_MEMORY_CFG2_WIDTH_32BITS           (1 << 6)
+#define ddrcReg_CTLR_MEMORY_CFG2_WIDTH_64BITS           (2 << 6)
+
+#define ddrcReg_CTLR_MEMORY_CFG2_AXI_BANK_BITS_MASK     (0x3 << 4)
+#define ddrcReg_CTLR_MEMORY_CFG2_AXI_BANK_BITS_2        (0 << 4)
+#define ddrcReg_CTLR_MEMORY_CFG2_AXI_BANK_BITS_3        (3 << 4)
+
+#define ddrcReg_CTLR_MEMORY_CFG2_CKE_INIT_STATE_LOW     (0 << 3)
+#define ddrcReg_CTLR_MEMORY_CFG2_CKE_INIT_STATE_HIGH    (1 << 3)
+
+#define ddrcReg_CTLR_MEMORY_CFG2_DQM_INIT_STATE_LOW     (0 << 2)
+#define ddrcReg_CTLR_MEMORY_CFG2_DQM_INIT_STATE_HIGH    (1 << 2)
+
+#define ddrcReg_CTLR_MEMORY_CFG2_CLK_MASK               (0x3 << 0)
+#define ddrcReg_CTLR_MEMORY_CFG2_CLK_ASYNC              (0 << 0)
+#define ddrcReg_CTLR_MEMORY_CFG2_CLK_SYNC_A_LE_M        (1 << 0)
+#define ddrcReg_CTLR_MEMORY_CFG2_CLK_SYNC_A_GT_M        (3 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_MEMORY_CFG3_REFRESH_TO_SHIFT       0
+#define ddrcReg_CTLR_MEMORY_CFG3_REFRESH_TO_MASK        (0x7 << ddrcReg_CTLR_MEMORY_CFG3_REFRESH_TO_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_T_FAW_SCHEDULE_DELAY_SHIFT         8
+#define ddrcReg_CTLR_T_FAW_SCHEDULE_DELAY_MASK          (0x1f << ddrcReg_CTLR_T_FAW_SCHEDULE_DELAY_SHIFT)
+
+#define ddrcReg_CTLR_T_FAW_PERIOD_SHIFT                 0
+#define ddrcReg_CTLR_T_FAW_PERIOD_MASK                  (0x1f << ddrcReg_CTLR_T_FAW_PERIOD_SHIFT)
+
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+/* ARM PL341 AXI ID QOS configuration registers, offset 0x100 */
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+
+#define ddrcReg_CTLR_QOS_CNT                            16
+#define ddrcReg_CTLR_QOS_MAX                            (ddrcReg_CTLR_QOS_CNT - 1)
+
+	typedef struct {
+		uint32_t cfg[ddrcReg_CTLR_QOS_CNT];
+	} ddrcReg_CTLR_QOS_REG_t;
+
+#define ddrcReg_CTLR_QOS_REG_OFFSET                     0x100
+#define ddrcReg_CTLR_QOS_REGP                           ((volatile ddrcReg_CTLR_QOS_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_CTLR_QOS_REG_OFFSET))
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_QOS_CFG_MAX_SHIFT                  2
+#define ddrcReg_CTLR_QOS_CFG_MAX_MASK                   (0xff << ddrcReg_CTLR_QOS_CFG_MAX_SHIFT)
+
+#define ddrcReg_CTLR_QOS_CFG_MIN_SHIFT                  1
+#define ddrcReg_CTLR_QOS_CFG_MIN_MASK                   (1 << ddrcReg_CTLR_QOS_CFG_MIN_SHIFT)
+
+#define ddrcReg_CTLR_QOS_CFG_ENABLE                     (1 << 0)
+
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+/* ARM PL341 Memory chip configuration registers, offset 0x200 */
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+
+#define ddrcReg_CTLR_CHIP_CNT                           4
+#define ddrcReg_CTLR_CHIP_MAX                           (ddrcReg_CTLR_CHIP_CNT - 1)
+
+	typedef struct {
+		uint32_t cfg[ddrcReg_CTLR_CHIP_CNT];
+	} ddrcReg_CTLR_CHIP_REG_t;
+
+#define ddrcReg_CTLR_CHIP_REG_OFFSET                    0x200
+#define ddrcReg_CTLR_CHIP_REGP                          ((volatile ddrcReg_CTLR_CHIP_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_CTLR_CHIP_REG_OFFSET))
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_CHIP_CFG_MEM_ORG_MASK              (1 << 16)
+#define ddrcReg_CTLR_CHIP_CFG_MEM_ORG_ROW_BANK_COL      (0 << 16)
+#define ddrcReg_CTLR_CHIP_CFG_MEM_ORG_BANK_ROW_COL      (1 << 16)
+
+#define ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MATCH_SHIFT      8
+#define ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MATCH_MASK       (0xff << ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MATCH_SHIFT)
+
+#define ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MASK_SHIFT       0
+#define ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MASK_MASK        (0xff << ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MASK_SHIFT)
+
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+/* ARM PL341 User configuration registers, offset 0x300 */
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+
+#define ddrcReg_CTLR_USER_OUTPUT_CNT                    2
+
+	typedef struct {
+		uint32_t input;
+		uint32_t output[ddrcReg_CTLR_USER_OUTPUT_CNT];
+		uint32_t feature;
+	} ddrcReg_CTLR_USER_REG_t;
+
+#define ddrcReg_CTLR_USER_REG_OFFSET                    0x300
+#define ddrcReg_CTLR_USER_REGP                          ((volatile ddrcReg_CTLR_USER_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_CTLR_USER_REG_OFFSET))
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_USER_INPUT_STATUS_SHIFT            0
+#define ddrcReg_CTLR_USER_INPUT_STATUS_MASK             (0xff << ddrcReg_CTLR_USER_INPUT_STATUS_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_USER_OUTPUT_CFG_SHIFT              0
+#define ddrcReg_CTLR_USER_OUTPUT_CFG_MASK               (0xff << ddrcReg_CTLR_USER_OUTPUT_CFG_SHIFT)
+
+#define ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_SHIFT      1
+#define ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_MASK       (1 << ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_SHIFT)
+#define ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_BP134      (0 << ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_SHIFT)
+#define ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_PL301      (1 << ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_SHIFT)
+#define ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_REGISTERED ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_PL301
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_CTLR_FEATURE_WRITE_BLOCK_DISABLE        (1 << 2)
+#define ddrcReg_CTLR_FEATURE_EARLY_BURST_RSP_DISABLE    (1 << 0)
+
+/*********************************************************************/
+/* Broadcom DDR23 PHY register definitions */
+/*********************************************************************/
+
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+/* Broadcom DDR23 PHY Address and Control register definitions */
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+
+	typedef struct {
+		uint32_t revision;
+		uint32_t pmCtl;
+		 REG32_RSVD(0x0008, 0x0010);
+		uint32_t pllStatus;
+		uint32_t pllCfg;
+		uint32_t pllPreDiv;
+		uint32_t pllDiv;
+		uint32_t pllCtl1;
+		uint32_t pllCtl2;
+		uint32_t ssCtl;
+		uint32_t ssCfg;
+		uint32_t vdlStatic;
+		uint32_t vdlDynamic;
+		uint32_t padIdle;
+		uint32_t pvtComp;
+		uint32_t padDrive;
+		uint32_t clkRgltrCtl;
+	} ddrcReg_PHY_ADDR_CTL_REG_t;
+
+#define ddrcReg_PHY_ADDR_CTL_REG_OFFSET                 0x0400
+#define ddrcReg_PHY_ADDR_CTL_REGP                       ((volatile ddrcReg_PHY_ADDR_CTL_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_PHY_ADDR_CTL_REG_OFFSET))
+
+/* @todo These SS definitions are duplicates of ones below */
+
+#define ddrcReg_PHY_ADDR_SS_CTRL_ENABLE                 0x00000001
+#define ddrcReg_PHY_ADDR_SS_CFG_CYCLE_PER_TICK_MASK     0xFFFF0000
+#define ddrcReg_PHY_ADDR_SS_CFG_CYCLE_PER_TICK_SHIFT    16
+#define ddrcReg_PHY_ADDR_SS_CFG_MIN_CYCLE_PER_TICK      10	/* Higher the value, lower the SS modulation frequency */
+#define ddrcReg_PHY_ADDR_SS_CFG_NDIV_AMPLITUDE_MASK     0x0000FFFF
+#define ddrcReg_PHY_ADDR_SS_CFG_NDIV_AMPLITUDE_SHIFT    0
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_REVISION_MAJOR_SHIFT       8
+#define ddrcReg_PHY_ADDR_CTL_REVISION_MAJOR_MASK        (0xff << ddrcReg_PHY_ADDR_CTL_REVISION_MAJOR_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_REVISION_MINOR_SHIFT       0
+#define ddrcReg_PHY_ADDR_CTL_REVISION_MINOR_MASK        (0xff << ddrcReg_PHY_ADDR_CTL_REVISION_MINOR_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_CLK_PM_CTL_DDR_CLK_DISABLE (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_STATUS_LOCKED          (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_DIV2_CLK_RESET     (1 << 31)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_TEST_SEL_SHIFT     17
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_TEST_SEL_MASK      (0x1f << ddrcReg_PHY_ADDR_CTL_PLL_CFG_TEST_SEL_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_TEST_ENABLE        (1 << 16)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_BGAP_ADJ_SHIFT     12
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_BGAP_ADJ_MASK      (0xf << ddrcReg_PHY_ADDR_CTL_PLL_CFG_BGAP_ADJ_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_VCO_RNG            (1 << 7)
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_CH1_PWRDWN         (1 << 6)
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_BYPASS_ENABLE      (1 << 5)
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_CLKOUT_ENABLE      (1 << 4)
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_D_RESET            (1 << 3)
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_A_RESET            (1 << 2)
+#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_PWRDWN             (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_DITHER_MFB     (1 << 26)
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_PWRDWN         (1 << 25)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_MODE_SHIFT     20
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_MODE_MASK      (0x7 << ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_MODE_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_INT_SHIFT      8
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_INT_MASK       (0x1ff << ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_INT_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P2_SHIFT       4
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P2_MASK        (0xf << ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P2_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P1_SHIFT       0
+#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P1_MASK        (0xf << ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P1_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_DIV_M1_SHIFT           24
+#define ddrcReg_PHY_ADDR_CTL_PLL_DIV_M1_MASK            (0xff << ddrcReg_PHY_ADDR_CTL_PLL_DIV_M1_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_DIV_FRAC_SHIFT         0
+#define ddrcReg_PHY_ADDR_CTL_PLL_DIV_FRAC_MASK          (0xffffff << ddrcReg_PHY_ADDR_CTL_PLL_DIV_FRAC_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_TESTA_SHIFT       30
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_TESTA_MASK        (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_TESTA_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XS_SHIFT     27
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XS_MASK      (0x7 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XS_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XF_SHIFT     24
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XF_MASK      (0x7 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XF_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_LPF_BW_SHIFT      22
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_LPF_BW_MASK       (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_LPF_BW_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_LF_ORDER          (0x1 << 21)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CN_SHIFT          19
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CN_MASK           (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CN_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RN_SHIFT          17
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RN_MASK           (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RN_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CP_SHIFT          15
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CP_MASK           (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CP_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CZ_SHIFT          13
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CZ_MASK           (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CZ_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RZ_SHIFT          10
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RZ_MASK           (0x7 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RZ_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICPX_SHIFT        5
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICPX_MASK         (0x1f << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICPX_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICP_OFF_SHIFT     0
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICP_OFF_MASK      (0x1f << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICP_OFF_SHIFT)
+
+/* ----------------------------------------------------- */
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_PTAP_ADJ_SHIFT    4
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_PTAP_ADJ_MASK     (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL2_PTAP_ADJ_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_CTAP_ADJ_SHIFT    2
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_CTAP_ADJ_MASK     (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL2_CTAP_ADJ_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_LOWCUR_ENABLE     (0x1 << 1)
+#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_BIASIN_ENABLE     (0x1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_SS_EN_ENABLE           (0x1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_CYC_PER_TICK_SHIFT  16
+#define ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_CYC_PER_TICK_MASK   (0xffff << ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_CYC_PER_TICK_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_NDIV_AMP_SHIFT      0
+#define ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_NDIV_AMP_MASK       (0xffff << ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_NDIV_AMP_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_FORCE           (1 << 20)
+#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_ENABLE          (1 << 16)
+
+#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_FALL_SHIFT      12
+#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_FALL_MASK       (0x3 << ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_FALL_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_RISE_SHIFT      8
+#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_RISE_MASK       (0x3 << ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_RISE_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_STEP_SHIFT      0
+#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_STEP_MASK       (0x3f << ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_STEP_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_ENABLE         (1 << 16)
+
+#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_FALL_SHIFT     12
+#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_FALL_MASK      (0x3 << ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_FALL_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_RISE_SHIFT     8
+#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_RISE_MASK      (0x3 << ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_RISE_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_STEP_SHIFT     0
+#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_STEP_MASK      (0x3f << ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_STEP_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_ENABLE            (1u << 31)
+#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_RXENB_DISABLE     (1 << 8)
+#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CTL_IDDQ_DISABLE  (1 << 6)
+#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CTL_REB_DISABLE   (1 << 5)
+#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CTL_OEB_DISABLE   (1 << 4)
+#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CKE_IDDQ_DISABLE  (1 << 2)
+#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CKE_REB_DISABLE   (1 << 1)
+#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CKE_OEB_DISABLE   (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_PD_DONE           (1 << 30)
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ND_DONE           (1 << 29)
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_SAMPLE_DONE       (1 << 28)
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_SAMPLE_AUTO_ENABLE    (1 << 27)
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_SAMPLE_ENABLE     (1 << 26)
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_OVR_ENABLE   (1 << 25)
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_OVR_ENABLE     (1 << 24)
+
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_PD_SHIFT          20
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_PD_MASK           (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_PD_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ND_SHIFT          16
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ND_MASK           (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_ND_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_PD_SHIFT     12
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_PD_MASK      (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_PD_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_ND_SHIFT     8
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_ND_MASK      (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_ND_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_PD_SHIFT       4
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_PD_MASK        (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_PD_SHIFT)
+
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_ND_SHIFT       0
+#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_ND_MASK        (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_ND_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_PAD_DRIVE_RT60B            (1 << 4)
+#define ddrcReg_PHY_ADDR_CTL_PAD_DRIVE_SEL_SSTL18       (1 << 3)
+#define ddrcReg_PHY_ADDR_CTL_PAD_DRIVE_SELTXDRV_CI      (1 << 2)
+#define ddrcReg_PHY_ADDR_CTL_PAD_DRIVE_SELRXDRV         (1 << 1)
+#define ddrcReg_PHY_ADDR_CTL_PAD_DRIVE_SLEW             (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_ADDR_CTL_CLK_RGLTR_CTL_PWR_HALF     (1 << 1)
+#define ddrcReg_PHY_ADDR_CTL_CLK_RGLTR_CTL_PWR_OFF      (1 << 0)
+
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+/* Broadcom DDR23 PHY Byte Lane register definitions */
+/* -------------------------------------------------------------------- */
+/* -------------------------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_CNT                       2
+#define ddrcReg_PHY_BYTE_LANE_MAX                       (ddrcReg_CTLR_BYTE_LANE_CNT - 1)
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_CNT               8
+
+	typedef struct {
+		uint32_t revision;
+		uint32_t vdlCalibrate;
+		uint32_t vdlStatus;
+		 REG32_RSVD(0x000c, 0x0010);
+		uint32_t vdlOverride[ddrcReg_PHY_BYTE_LANE_VDL_OVR_CNT];
+		uint32_t readCtl;
+		uint32_t readStatus;
+		uint32_t readClear;
+		uint32_t padIdleCtl;
+		uint32_t padDriveCtl;
+		uint32_t padClkCtl;
+		uint32_t writeCtl;
+		uint32_t clkRegCtl;
+	} ddrcReg_PHY_BYTE_LANE_REG_t;
+
+/* There are 2 instances of the byte Lane registers, one for each byte lane. */
+#define ddrcReg_PHY_BYTE_LANE_1_REG_OFFSET              0x0500
+#define ddrcReg_PHY_BYTE_LANE_2_REG_OFFSET              0x0600
+
+#define ddrcReg_PHY_BYTE_LANE_1_REGP                    ((volatile ddrcReg_PHY_BYTE_LANE_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_PHY_BYTE_LANE_1_REG_OFFSET))
+#define ddrcReg_PHY_BYTE_LANE_2_REGP                    ((volatile ddrcReg_PHY_BYTE_LANE_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_PHY_BYTE_LANE_2_REG_OFFSET))
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_REVISION_MAJOR_SHIFT      8
+#define ddrcReg_PHY_BYTE_LANE_REVISION_MAJOR_MASK       (0xff << ddrcReg_PHY_BYTE_LANE_REVISION_MAJOR_SHIFT)
+
+#define ddrcReg_PHY_BYTE_LANE_REVISION_MINOR_SHIFT      0
+#define ddrcReg_PHY_BYTE_LANE_REVISION_MINOR_MASK       (0xff << ddrcReg_PHY_BYTE_LANE_REVISION_MINOR_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_CLK_2CYCLE      (1 << 4)
+#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_CLK_1CYCLE      (0 << 4)
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_TEST            (1 << 3)
+#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_ALWAYS          (1 << 2)
+#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_ONCE            (1 << 1)
+#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_FAST            (1 << 0)
+
+/* ----------------------------------------------------- */
+
+/* The byte lane VDL status calibTotal[9:0] is comprised of [9:4] step value, [3:2] fine fall */
+/* and [1:0] fine rise. Note that calibTotal[9:0] is located at bit 4 in the VDL status */
+/* register. The fine rise and fall are no longer used, so add some definitions for just */
+/* the step setting to simplify things. */
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_STEP_SHIFT     8
+#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_STEP_MASK      (0x3f << ddrcReg_PHY_BYTE_LANE_VDL_STATUS_STEP_SHIFT)
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_TOTAL_SHIFT    4
+#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_TOTAL_MASK     (0x3ff << ddrcReg_PHY_BYTE_LANE_VDL_STATUS_TOTAL_SHIFT)
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_LOCK           (1 << 1)
+#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_IDLE           (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_ENABLE            (1 << 16)
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_FALL_SHIFT        12
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_FALL_MASK         (0x3 << ddrcReg_PHY_BYTE_LANE_VDL_OVR_FALL_SHIFT)
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_RISE_SHIFT        8
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_RISE_MASK         (0x3 << ddrcReg_PHY_BYTE_LANE_VDL_OVR_RISE_SHIFT)
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_STEP_SHIFT        0
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_STEP_MASK         (0x3f << ddrcReg_PHY_BYTE_LANE_VDL_OVR_STEP_SHIFT)
+
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_STATIC_READ_DQS_P     0
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_STATIC_READ_DQS_N     1
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_STATIC_READ_EN        2
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_STATIC_WRITE_DQ_DQM   3
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_DYNAMIC_READ_DQS_P    4
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_DYNAMIC_READ_DQS_N    5
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_DYNAMIC_READ_EN       6
+#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_DYNAMIC_WRITE_DQ_DQM  7
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_READ_CTL_DELAY_SHIFT      8
+#define ddrcReg_PHY_BYTE_LANE_READ_CTL_DELAY_MASK       (0x3 << ddrcReg_PHY_BYTE_LANE_READ_CTL_DELAY_SHIFT)
+
+#define ddrcReg_PHY_BYTE_LANE_READ_CTL_DQ_ODT_ENABLE    (1 << 3)
+#define ddrcReg_PHY_BYTE_LANE_READ_CTL_DQ_ODT_ADJUST    (1 << 2)
+#define ddrcReg_PHY_BYTE_LANE_READ_CTL_RD_ODT_ENABLE    (1 << 1)
+#define ddrcReg_PHY_BYTE_LANE_READ_CTL_RD_ODT_ADJUST    (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_READ_STATUS_ERROR_SHIFT   0
+#define ddrcReg_PHY_BYTE_LANE_READ_STATUS_ERROR_MASK    (0xf << ddrcReg_PHY_BYTE_LANE_READ_STATUS_ERROR_SHIFT)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_READ_CLEAR_STATUS         (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_ENABLE                   (1u << 31)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DM_RXENB_DISABLE         (1 << 19)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DM_IDDQ_DISABLE          (1 << 18)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DM_REB_DISABLE           (1 << 17)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DM_OEB_DISABLE           (1 << 16)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQ_RXENB_DISABLE         (1 << 15)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQ_IDDQ_DISABLE          (1 << 14)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQ_REB_DISABLE           (1 << 13)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQ_OEB_DISABLE           (1 << 12)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_READ_ENB_RXENB_DISABLE   (1 << 11)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_READ_ENB_IDDQ_DISABLE    (1 << 10)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_READ_ENB_REB_DISABLE     (1 << 9)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_READ_ENB_OEB_DISABLE     (1 << 8)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQS_RXENB_DISABLE        (1 << 7)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQS_IDDQ_DISABLE         (1 << 6)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQS_REB_DISABLE          (1 << 5)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQS_OEB_DISABLE          (1 << 4)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_CLK_RXENB_DISABLE        (1 << 3)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_CLK_IDDQ_DISABLE         (1 << 2)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_CLK_REB_DISABLE          (1 << 1)
+#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_CLK_OEB_DISABLE          (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_RT60B_DDR_READ_ENB      (1 << 5)
+#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_RT60B                   (1 << 4)
+#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_SEL_SSTL18              (1 << 3)
+#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_SELTXDRV_CI             (1 << 2)
+#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_SELRXDRV                (1 << 1)
+#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_SLEW                    (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_PAD_CLK_CTL_DISABLE                   (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_WRITE_CTL_PREAMBLE_DDR3               (1 << 0)
+
+/* ----------------------------------------------------- */
+
+#define ddrcReg_PHY_BYTE_LANE_CLK_REG_CTL_PWR_HALF                  (1 << 1)
+#define ddrcReg_PHY_BYTE_LANE_CLK_REG_CTL_PWR_OFF                   (1 << 0)
+
+/*********************************************************************/
+/* ARM PL341 DDRC to Broadcom DDR23 PHY glue register definitions */
+/*********************************************************************/
+
+	typedef struct {
+		uint32_t cfg;
+		uint32_t actMonCnt;
+		uint32_t ctl;
+		uint32_t lbistCtl;
+		uint32_t lbistSeed;
+		uint32_t lbistStatus;
+		uint32_t tieOff;
+		uint32_t actMonClear;
+		uint32_t status;
+		uint32_t user;
+	} ddrcReg_CTLR_PHY_GLUE_REG_t;
+
+#define ddrcReg_CTLR_PHY_GLUE_OFFSET                            0x0700
+#define ddrcReg_CTLR_PHY_GLUE_REGP                              ((volatile ddrcReg_CTLR_PHY_GLUE_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_CTLR_PHY_GLUE_OFFSET))
+
+/* ----------------------------------------------------- */
+
+/* DDR2 / AXI block phase alignment interrupt control */
+#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT                     18
+#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_MASK                      (0x3 << ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_OFF                       (0 << ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_ON_TIGHT                  (1 << ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_ON_MEDIUM                 (2 << ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_ON_LOOSE                  (3 << ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT)
+
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_SHIFT              17
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_MASK               (1 << ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_DIFFERENTIAL       (0 << ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_CMOS               (1 << ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_SHIFT)
+
+#define ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHIFT            16
+#define ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_MASK             (1 << ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_DEEP             (0 << ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHALLOW          (1 << ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_HW_FIXED_ALIGNMENT_DISABLED   ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHALLOW
+
+#define ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_SHIFT             15
+#define ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_MASK              (1 << ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_BP134             (0 << ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_PL301             (1 << ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_REGISTERED        ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_PL301
+
+/* Software control of PHY VDL updates from control register settings. Bit 13 enables the use of Bit 14. */
+/* If software control is not enabled, then updates occur when a refresh command is issued by the hardware */
+/* controller. If 2 chips selects are being used, then software control must be enabled. */
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PHY_VDL_UPDATE_SW_CTL_LOAD    (1 << 14)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PHY_VDL_UPDATE_SW_CTL_ENABLE  (1 << 13)
+
+/* Use these to bypass a pipeline stage. By default the ADDR is off but the BYTE LANE in / out are on. */
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PHY_ADDR_CTL_IN_BYPASS_PIPELINE_STAGE (1 << 12)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PHY_BYTE_LANE_IN_BYPASS_PIPELINE_STAGE (1 << 11)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_PHY_BYTE_LANE_OUT_BYPASS_PIPELINE_STAGE (1 << 10)
+
+/* Chip select count */
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_SHIFT                  9
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_MASK                   (1 << ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_1                      (0 << ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_2                      (1 << ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_SHIFT)
+
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CLK_SHIFT                     8
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CLK_ASYNC                     (0 << ddrcReg_CTLR_PHY_GLUE_CFG_CLK_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CLK_SYNC                      (1 << ddrcReg_CTLR_PHY_GLUE_CFG_CLK_SHIFT)
+
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CKE_INIT_SHIFT                7
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CKE_INIT_LOW                  (0 << ddrcReg_CTLR_PHY_GLUE_CFG_CKE_INIT_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CKE_INIT_HIGH                 (1 << ddrcReg_CTLR_PHY_GLUE_CFG_CKE_INIT_SHIFT)
+
+#define ddrcReg_CTLR_PHY_GLUE_CFG_DQM_INIT_SHIFT                6
+#define ddrcReg_CTLR_PHY_GLUE_CFG_DQM_INIT_LOW                  (0 << ddrcReg_CTLR_PHY_GLUE_CFG_DQM_INIT_SHIFT)
+#define ddrcReg_CTLR_PHY_GLUE_CFG_DQM_INIT_HIGH                 (1 << ddrcReg_CTLR_PHY_GLUE_CFG_DQM_INIT_SHIFT)
+
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CAS_LATENCY_SHIFT             0
+#define ddrcReg_CTLR_PHY_GLUE_CFG_CAS_LATENCY_MASK              (0x7 << ddrcReg_CTLR_PHY_GLUE_CFG_CAS_LATENCY_SHIFT)
+
+/* ----------------------------------------------------- */
+#define ddrcReg_CTLR_PHY_GLUE_STATUS_PHASE_SHIFT                0
+#define ddrcReg_CTLR_PHY_GLUE_STATUS_PHASE_MASK                 (0x7f << ddrcReg_CTLR_PHY_GLUE_STATUS_PHASE_SHIFT)
+
+/* ---- Public Function Prototypes --------------------------------------- */
+
+#ifdef __cplusplus
+}				/* end extern "C" */
+#endif
+#endif				/* DDRC_REG_H */
-- 
cgit v1.2.3


From f1947c7a6717e437d9fe0e27a76bacf77f570d2d Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Fri, 7 Aug 2009 20:04:54 +0100
Subject: ARM: 5654/1: bcmring: add csp chipc hardware register file

add csp chipc hardware register file

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 .../mach-bcmring/include/mach/csp/chipcHw_reg.h    | 530 +++++++++++++++++++++
 1 file changed, 530 insertions(+)
 create mode 100644 arch/arm/mach-bcmring/include/mach/csp/chipcHw_reg.h

(limited to 'arch')

diff --git a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_reg.h b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_reg.h
new file mode 100644
index 00000000000..b162448f613
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_reg.h
@@ -0,0 +1,530 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    chipcHw_reg.h
+*
+*  @brief   Definitions for low level chip control registers
+*
+*/
+/****************************************************************************/
+#ifndef CHIPCHW_REG_H
+#define CHIPCHW_REG_H
+
+#include <mach/csp/mm_io.h>
+#include <csp/reg.h>
+#include <mach/csp/ddrcReg.h>
+
+#define chipcHw_BASE_ADDRESS    MM_IO_BASE_CHIPC
+
+typedef struct {
+	uint32_t ChipId;	/* Chip ID */
+	uint32_t DDRClock;	/* PLL1 Channel 1 for DDR clock */
+	uint32_t ARMClock;	/* PLL1 Channel 2 for ARM clock */
+	uint32_t ESWClock;	/* PLL1 Channel 3 for ESW system clock */
+	uint32_t VPMClock;	/* PLL1 Channel 4 for VPM clock */
+	uint32_t ESW125Clock;	/* PLL1 Channel 5 for ESW 125MHz clock */
+	uint32_t UARTClock;	/* PLL1 Channel 6 for UART clock */
+	uint32_t SDIO0Clock;	/* PLL1 Channel 7 for SDIO 0 clock */
+	uint32_t SDIO1Clock;	/* PLL1 Channel 8 for SDIO 1 clock */
+	uint32_t SPIClock;	/* PLL1 Channel 9 for SPI master Clock  */
+	uint32_t ETMClock;	/* PLL1 Channel 10 for ARM ETM Clock  */
+
+	uint32_t ACLKClock;	/* ACLK Clock (Divider) */
+	uint32_t OTPClock;	/* OTP Clock  (Divider) */
+	uint32_t I2CClock;	/* I2C Clock (CK_13m) (Divider) */
+	uint32_t I2S0Clock;	/* I2S0 Clock (Divider) */
+	uint32_t RTBUSClock;	/* RTBUS (DDR PHY Config.) Clock (Divider) */
+	uint32_t pad1;
+	uint32_t APM100Clock;	/* APM 100MHz CLK Clock (Divider) */
+	uint32_t TSCClock;	/* TSC Clock (Divider) */
+	uint32_t LEDClock;	/* LED Clock (Divider) */
+
+	uint32_t USBClock;	/* PLL2 Channel 1 for USB clock */
+	uint32_t LCDClock;	/* PLL2 Channel 2 for LCD clock */
+	uint32_t APMClock;	/* PLL2 Channel 3 for APM 200 MHz clock */
+
+	uint32_t BusIntfClock;	/* Bus interface clock */
+
+	uint32_t PLLStatus;	/* PLL status register (PLL1) */
+	uint32_t PLLConfig;	/* PLL configuration register  (PLL1) */
+	uint32_t PLLPreDivider;	/* PLL pre-divider control register (PLL1) */
+	uint32_t PLLDivider;	/* PLL divider control register (PLL1) */
+	uint32_t PLLControl1;	/* PLL analog control register #1 (PLL1) */
+	uint32_t PLLControl2;	/* PLL analog control register #2 (PLL1) */
+
+	uint32_t I2S1Clock;	/* I2S1 Clock  */
+	uint32_t AudioEnable;	/* Enable/ disable audio channel */
+	uint32_t SoftReset1;	/* Reset blocks */
+	uint32_t SoftReset2;	/* Reset blocks */
+	uint32_t Spare1;	/* Phase align interrupts */
+	uint32_t Sticky;	/* Sticky bits */
+	uint32_t MiscCtrl;	/* Misc. control */
+	uint32_t pad3[3];
+
+	uint32_t PLLStatus2;	/* PLL status register (PLL2) */
+	uint32_t PLLConfig2;	/* PLL configuration register  (PLL2) */
+	uint32_t PLLPreDivider2;	/* PLL pre-divider control register (PLL2) */
+	uint32_t PLLDivider2;	/* PLL divider control register (PLL2) */
+	uint32_t PLLControl12;	/* PLL analog control register #1 (PLL2) */
+	uint32_t PLLControl22;	/* PLL analog control register #2 (PLL2) */
+
+	uint32_t DDRPhaseCtrl1;	/* DDR Clock Phase Alignment control1 */
+	uint32_t VPMPhaseCtrl1;	/* VPM Clock Phase Alignment control1 */
+	uint32_t PhaseAlignStatus;	/* DDR/VPM Clock Phase Alignment Status */
+	uint32_t PhaseCtrlStatus;	/* DDR/VPM Clock HW DDR/VPM ph_ctrl and load_ch Status */
+	uint32_t DDRPhaseCtrl2;	/* DDR Clock Phase Alignment control2 */
+	uint32_t VPMPhaseCtrl2;	/* VPM Clock Phase Alignment control2 */
+	uint32_t pad4[9];
+
+	uint32_t SoftOTP1;	/* Software OTP control */
+	uint32_t SoftOTP2;	/* Software OTP control */
+	uint32_t SoftStraps;	/* Software strap */
+	uint32_t PinStraps;	/* Pin Straps */
+	uint32_t DiffOscCtrl;	/* Diff oscillator control */
+	uint32_t DiagsCtrl;	/* Diagnostic control */
+	uint32_t DiagsOutputCtrl;	/* Diagnostic output enable */
+	uint32_t DiagsReadBackCtrl;	/* Diagnostic read back control */
+
+	uint32_t LcdPifMode;	/* LCD/PIF Pin Sharing MUX Mode */
+
+	uint32_t GpioMux_0_7;	/* Pin Sharing MUX0 Control */
+	uint32_t GpioMux_8_15;	/* Pin Sharing MUX1 Control */
+	uint32_t GpioMux_16_23;	/* Pin Sharing MUX2 Control */
+	uint32_t GpioMux_24_31;	/* Pin Sharing MUX3 Control */
+	uint32_t GpioMux_32_39;	/* Pin Sharing MUX4 Control */
+	uint32_t GpioMux_40_47;	/* Pin Sharing MUX5 Control */
+	uint32_t GpioMux_48_55;	/* Pin Sharing MUX6 Control */
+	uint32_t GpioMux_56_63;	/* Pin Sharing MUX7 Control */
+
+	uint32_t GpioSR_0_7;	/* Slew rate for GPIO 0 - 7 */
+	uint32_t GpioSR_8_15;	/* Slew rate for GPIO 8 - 15 */
+	uint32_t GpioSR_16_23;	/* Slew rate for GPIO 16 - 23 */
+	uint32_t GpioSR_24_31;	/* Slew rate for GPIO 24 - 31 */
+	uint32_t GpioSR_32_39;	/* Slew rate for GPIO 32 - 39 */
+	uint32_t GpioSR_40_47;	/* Slew rate for GPIO 40 - 47 */
+	uint32_t GpioSR_48_55;	/* Slew rate for GPIO 48 - 55 */
+	uint32_t GpioSR_56_63;	/* Slew rate for GPIO 56 - 63 */
+	uint32_t MiscSR_0_7;	/* Slew rate for MISC 0 - 7 */
+	uint32_t MiscSR_8_15;	/* Slew rate for MISC 8 - 15 */
+
+	uint32_t GpioPull_0_15;	/* Pull up registers for GPIO 0 - 15 */
+	uint32_t GpioPull_16_31;	/* Pull up registers for GPIO 16 - 31 */
+	uint32_t GpioPull_32_47;	/* Pull up registers for GPIO 32 - 47 */
+	uint32_t GpioPull_48_63;	/* Pull up registers for GPIO 48 - 63 */
+	uint32_t MiscPull_0_15;	/* Pull up registers for MISC 0 - 15 */
+
+	uint32_t GpioInput_0_31;	/* Input type for GPIO 0 - 31 */
+	uint32_t GpioInput_32_63;	/* Input type for GPIO 32 - 63 */
+	uint32_t MiscInput_0_15;	/* Input type for MISC 0 - 16 */
+} chipcHw_REG_t;
+
+#define pChipcHw  ((volatile chipcHw_REG_t *) chipcHw_BASE_ADDRESS)
+#define pChipcPhysical  ((volatile chipcHw_REG_t *) MM_ADDR_IO_CHIPC)
+
+#define chipcHw_REG_CHIPID_BASE_MASK                    0xFFFFF000
+#define chipcHw_REG_CHIPID_BASE_SHIFT                   12
+#define chipcHw_REG_CHIPID_REV_MASK                     0x00000FFF
+#define chipcHw_REG_REV_A0                              0xA00
+#define chipcHw_REG_REV_B0                              0x0B0
+
+#define chipcHw_REG_PLL_STATUS_CONTROL_ENABLE           0x80000000	/* Allow controlling PLL registers */
+#define chipcHw_REG_PLL_STATUS_LOCKED                   0x00000001	/* PLL is settled */
+#define chipcHw_REG_PLL_CONFIG_D_RESET                  0x00000008	/* Digital reset */
+#define chipcHw_REG_PLL_CONFIG_A_RESET                  0x00000004	/* Analog reset */
+#define chipcHw_REG_PLL_CONFIG_BYPASS_ENABLE            0x00000020	/* Bypass enable */
+#define chipcHw_REG_PLL_CONFIG_OUTPUT_ENABLE            0x00000010	/* Output enable */
+#define chipcHw_REG_PLL_CONFIG_POWER_DOWN               0x00000001	/* Power down */
+#define chipcHw_REG_PLL_CONFIG_VCO_SPLIT_FREQ           1600000000	/* 1.6GHz VCO split frequency */
+#define chipcHw_REG_PLL_CONFIG_VCO_800_1600             0x00000000	/* VCO range 800-1600 MHz */
+#define chipcHw_REG_PLL_CONFIG_VCO_1601_3200            0x00000080	/* VCO range 1601-3200 MHz */
+#define chipcHw_REG_PLL_CONFIG_TEST_ENABLE              0x00010000	/* PLL test output enable */
+#define chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK         0x003E0000	/* Mask to set test values */
+#define chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT        17
+
+#define chipcHw_REG_PLL_CLOCK_PHASE_COMP                0x00800000	/* Phase comparator output */
+#define chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_MASK         0x00300000	/* Clock to bus ratio mask */
+#define chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_SHIFT        20	/* Number of bits to be shifted */
+#define chipcHw_REG_PLL_CLOCK_POWER_DOWN                0x00080000	/* PLL channel power down */
+#define chipcHw_REG_PLL_CLOCK_SOURCE_GPIO               0x00040000	/* Use GPIO as source */
+#define chipcHw_REG_PLL_CLOCK_BYPASS_SELECT             0x00020000	/* Select bypass clock */
+#define chipcHw_REG_PLL_CLOCK_OUTPUT_ENABLE             0x00010000	/* Clock gated ON */
+#define chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE       0x00008000	/* Clock phase update enable */
+#define chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT       8	/* Number of bits to be shifted */
+#define chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK        0x00003F00	/* Phase control mask */
+#define chipcHw_REG_PLL_CLOCK_MDIV_MASK                 0x000000FF	/* Clock post divider mask
+
+									   00000000 = divide-by-256
+									   00000001 = divide-by-1
+									   00000010 = divide-by-2
+									   00000011 = divide-by-3
+									   00000100 = divide-by-4
+									   00000101 = divide-by-5
+									   00000110 = divide-by-6
+									   .
+									   .
+									   11111011 = divide-by-251
+									   11111100 = divide-by-252
+									   11111101 = divide-by-253
+									   11111110 = divide-by-254
+									 */
+
+#define chipcHw_REG_DIV_CLOCK_SOURCE_OTHER              0x00040000	/* NON-PLL clock source select */
+#define chipcHw_REG_DIV_CLOCK_BYPASS_SELECT             0x00020000	/* NON-PLL clock bypass enable */
+#define chipcHw_REG_DIV_CLOCK_OUTPUT_ENABLE             0x00010000	/* NON-PLL clock output enable */
+#define chipcHw_REG_DIV_CLOCK_DIV_MASK                  0x000000FF	/* NON-PLL clock post-divide mask */
+#define chipcHw_REG_DIV_CLOCK_DIV_256                   0x00000000	/* NON-PLL clock post-divide by 256 */
+
+#define chipcHw_REG_PLL_PREDIVIDER_P1_SHIFT             0
+#define chipcHw_REG_PLL_PREDIVIDER_P2_SHIFT             4
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT           8
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK            0x0001FF00
+#define chipcHw_REG_PLL_PREDIVIDER_POWER_DOWN           0x02000000
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK       0x00700000	/* Divider mask */
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER    0x00000000	/* Integer-N Mode */
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASH_UNIT  0x00100000	/* MASH Sigma-Delta Modulator Unit Mode */
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MFB_UNIT   0x00200000	/* MFB Sigma-Delta Modulator Unit Mode */
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASH_1_8   0x00300000	/* MASH Sigma-Delta Modulator 1/8 Mode */
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MFB_1_8    0x00400000	/* MFB Sigma-Delta Modulator 1/8 Mode */
+
+#define chipcHw_REG_PLL_PREDIVIDER_NDIV_i(vco)          ((vco) / chipcHw_XTAL_FREQ_Hz)
+#define chipcHw_REG_PLL_PREDIVIDER_P1                   1
+#define chipcHw_REG_PLL_PREDIVIDER_P2                   1
+
+#define chipcHw_REG_PLL_DIVIDER_M1DIV                   0x03000000
+#define chipcHw_REG_PLL_DIVIDER_FRAC                    0x00FFFFFF	/* Fractional divider */
+
+#define chipcHw_REG_PLL_DIVIDER_NDIV_f_SS               (0x00FFFFFF)	/* To attain spread with max frequency */
+
+#define chipcHw_REG_PLL_DIVIDER_NDIV_f                  0	/* ndiv_frac = chipcHw_REG_PLL_DIVIDER_NDIV_f /
+								   chipcHw_REG_PLL_DIVIDER_FRAC
+								   = 0, when SS is disable
+								 */
+
+#define chipcHw_REG_PLL_DIVIDER_MDIV(vco, Hz)           ((chipcHw_divide((vco), (Hz)) > 255) ? 0 : chipcHw_divide((vco), (Hz)))
+
+#define chipcHw_REG_ACLKClock_CLK_DIV_MASK              0x3
+
+/* System booting strap options */
+#define chipcHw_STRAPS_SOFT_OVERRIDE                    0x00000001	/* Software Strap Override */
+
+#define chipcHw_STRAPS_BOOT_DEVICE_NAND_FLASH_8         0x00000000	/* 8 bit NAND FLASH Boot */
+#define chipcHw_STRAPS_BOOT_DEVICE_NOR_FLASH_16         0x00000002	/* 16 bit NOR FLASH Boot */
+#define chipcHw_STRAPS_BOOT_DEVICE_SERIAL_FLASH         0x00000004	/* Serial FLASH Boot */
+#define chipcHw_STRAPS_BOOT_DEVICE_NAND_FLASH_16        0x00000006	/* 16 bit NAND FLASH Boot */
+#define chipcHw_STRAPS_BOOT_DEVICE_UART                 0x00000008	/* UART Boot */
+#define chipcHw_STRAPS_BOOT_DEVICE_MASK                 0x0000000E	/* Mask */
+
+/* System boot option */
+#define chipcHw_STRAPS_BOOT_OPTION_BROM                 0x00000000	/* Boot from Boot ROM */
+#define chipcHw_STRAPS_BOOT_OPTION_ARAM                 0x00000020	/* Boot from ARAM */
+#define chipcHw_STRAPS_BOOT_OPTION_NOR                  0x00000030	/* Boot from NOR flash */
+
+/* NAND Flash page size strap options */
+#define chipcHw_STRAPS_NAND_PAGESIZE_512                0x00000000	/* NAND FLASH page size of 512 bytes */
+#define chipcHw_STRAPS_NAND_PAGESIZE_2048               0x00000040	/* NAND FLASH page size of 2048 bytes */
+#define chipcHw_STRAPS_NAND_PAGESIZE_4096               0x00000080	/* NAND FLASH page size of 4096 bytes */
+#define chipcHw_STRAPS_NAND_PAGESIZE_EXT                0x000000C0	/* NAND FLASH page of extened size */
+#define chipcHw_STRAPS_NAND_PAGESIZE_MASK               0x000000C0	/* Mask */
+
+#define chipcHw_STRAPS_NAND_EXTRA_CYCLE                 0x00000400	/* NAND FLASH address cycle configuration */
+#define chipcHw_STRAPS_REBOOT_TO_UART                   0x00000800	/* Reboot to UART on error */
+
+/* Secure boot mode strap options */
+#define chipcHw_STRAPS_BOOT_MODE_NORMAL                 0x00000000	/* Normal Boot */
+#define chipcHw_STRAPS_BOOT_MODE_DBG_SW                 0x00000100	/* Software debugging Boot */
+#define chipcHw_STRAPS_BOOT_MODE_DBG_BOOT               0x00000200	/* Boot rom debugging Boot */
+#define chipcHw_STRAPS_BOOT_MODE_NORMAL_QUIET           0x00000300	/* Normal Boot (Quiet BootRom) */
+#define chipcHw_STRAPS_BOOT_MODE_MASK                   0x00000300	/* Mask */
+
+/* Slave Mode straps */
+#define chipcHw_STRAPS_I2CS                             0x02000000	/* I2C Slave  */
+#define chipcHw_STRAPS_SPIS                             0x01000000	/* SPI Slave  */
+
+/* Strap pin options */
+#define chipcHw_REG_SW_STRAPS                           ((pChipcHw->PinStraps & 0x0000FC00) >> 10)
+
+/* PIF/LCD pin sharing defines */
+#define chipcHw_REG_LCD_PIN_ENABLE                      0x00000001	/* LCD Controller is used and the pins have LCD functions */
+#define chipcHw_REG_PIF_PIN_ENABLE                      0x00000002	/* LCD pins are used to perform PIF functions  */
+
+#define chipcHw_GPIO_COUNT                              61	/* Number of GPIO pin accessible thorugh CHIPC */
+
+/* NOTE: Any changes to these constants will require a corresponding change to chipcHw_str.c */
+#define chipcHw_REG_GPIO_MUX_KEYPAD                     0x00000001	/* GPIO mux for Keypad */
+#define chipcHw_REG_GPIO_MUX_I2CH                       0x00000002	/* GPIO mux for I2CH */
+#define chipcHw_REG_GPIO_MUX_SPI                        0x00000003	/* GPIO mux for SPI */
+#define chipcHw_REG_GPIO_MUX_UART                       0x00000004	/* GPIO mux for UART */
+#define chipcHw_REG_GPIO_MUX_LEDMTXP                    0x00000005	/* GPIO mux for LEDMTXP */
+#define chipcHw_REG_GPIO_MUX_LEDMTXS                    0x00000006	/* GPIO mux for LEDMTXS */
+#define chipcHw_REG_GPIO_MUX_SDIO0                      0x00000007	/* GPIO mux for SDIO0 */
+#define chipcHw_REG_GPIO_MUX_SDIO1                      0x00000008	/* GPIO mux for SDIO1 */
+#define chipcHw_REG_GPIO_MUX_PCM                        0x00000009	/* GPIO mux for PCM */
+#define chipcHw_REG_GPIO_MUX_I2S                        0x0000000A	/* GPIO mux for I2S */
+#define chipcHw_REG_GPIO_MUX_ETM                        0x0000000B	/* GPIO mux for ETM */
+#define chipcHw_REG_GPIO_MUX_DEBUG                      0x0000000C	/* GPIO mux for DEBUG */
+#define chipcHw_REG_GPIO_MUX_MISC                       0x0000000D	/* GPIO mux for MISC */
+#define chipcHw_REG_GPIO_MUX_GPIO                       0x00000000	/* GPIO mux for GPIO */
+#define chipcHw_REG_GPIO_MUX(pin)                       (&pChipcHw->GpioMux_0_7 + ((pin) >> 3))
+#define chipcHw_REG_GPIO_MUX_POSITION(pin)              (((pin) & 0x00000007) << 2)
+#define chipcHw_REG_GPIO_MUX_MASK                       0x0000000F	/* Mask */
+
+#define chipcHw_REG_SLEW_RATE_HIGH                      0x00000000	/* High speed slew rate */
+#define chipcHw_REG_SLEW_RATE_NORMAL                    0x00000008	/* Normal slew rate */
+							/* Pins beyond 42 are defined by skipping 8 bits within the register */
+#define chipcHw_REG_SLEW_RATE(pin)                      (((pin) > 42) ? (&pChipcHw->GpioSR_0_7 + (((pin) + 2) >> 3)) : (&pChipcHw->GpioSR_0_7 + ((pin) >> 3)))
+#define chipcHw_REG_SLEW_RATE_POSITION(pin)             (((pin) > 42) ? ((((pin) + 2) & 0x00000007) << 2) : (((pin) & 0x00000007) << 2))
+#define chipcHw_REG_SLEW_RATE_MASK                      0x00000008	/* Mask */
+
+#define chipcHw_REG_CURRENT_STRENGTH_2mA                0x00000001	/* Current driving strength 2 milli ampere */
+#define chipcHw_REG_CURRENT_STRENGTH_4mA                0x00000002	/* Current driving strength 4 milli ampere */
+#define chipcHw_REG_CURRENT_STRENGTH_6mA                0x00000004	/* Current driving strength 6 milli ampere */
+#define chipcHw_REG_CURRENT_STRENGTH_8mA                0x00000005	/* Current driving strength 8 milli ampere */
+#define chipcHw_REG_CURRENT_STRENGTH_10mA               0x00000006	/* Current driving strength 10 milli ampere */
+#define chipcHw_REG_CURRENT_STRENGTH_12mA               0x00000007	/* Current driving strength 12 milli ampere */
+#define chipcHw_REG_CURRENT_MASK                        0x00000007	/* Mask */
+							/* Pins beyond 42 are defined by skipping 8 bits */
+#define chipcHw_REG_CURRENT(pin)                        (((pin) > 42) ? (&pChipcHw->GpioSR_0_7 + (((pin) + 2) >> 3)) : (&pChipcHw->GpioSR_0_7 + ((pin) >> 3)))
+#define chipcHw_REG_CURRENT_POSITION(pin)               (((pin) > 42) ? ((((pin) + 2) & 0x00000007) << 2) : (((pin) & 0x00000007) << 2))
+
+#define chipcHw_REG_PULL_NONE                           0x00000000	/* No pull up register */
+#define chipcHw_REG_PULL_UP                             0x00000001	/* Pull up register enable */
+#define chipcHw_REG_PULL_DOWN                           0x00000002	/* Pull down register enable */
+#define chipcHw_REG_PULLUP_MASK                         0x00000003	/* Mask */
+							/* Pins beyond 42 are defined by skipping 4 bits */
+#define chipcHw_REG_PULLUP(pin)                         (((pin) > 42) ? (&pChipcHw->GpioPull_0_15 + (((pin) + 2) >> 4)) : (&pChipcHw->GpioPull_0_15 + ((pin) >> 4)))
+#define chipcHw_REG_PULLUP_POSITION(pin)                (((pin) > 42) ? ((((pin) + 2) & 0x0000000F) << 1) : (((pin) & 0x0000000F) << 1))
+
+#define chipcHw_REG_INPUTTYPE_CMOS                      0x00000000	/* Normal CMOS logic */
+#define chipcHw_REG_INPUTTYPE_ST                        0x00000001	/* High speed Schmitt Trigger */
+#define chipcHw_REG_INPUTTYPE_MASK                      0x00000001	/* Mask */
+							/* Pins beyond 42 are defined by skipping 2 bits */
+#define chipcHw_REG_INPUTTYPE(pin)                      (((pin) > 42) ? (&pChipcHw->GpioInput_0_31 + (((pin) + 2) >> 5)) : (&pChipcHw->GpioInput_0_31 + ((pin) >> 5)))
+#define chipcHw_REG_INPUTTYPE_POSITION(pin)             (((pin) > 42) ? ((((pin) + 2) & 0x0000001F)) : (((pin) & 0x0000001F)))
+
+/* Device connected to the bus clock */
+#define chipcHw_REG_BUS_CLOCK_ARM                       0x00000001	/* Bus interface clock for ARM */
+#define chipcHw_REG_BUS_CLOCK_VDEC                      0x00000002	/* Bus interface clock for VDEC */
+#define chipcHw_REG_BUS_CLOCK_ARAM                      0x00000004	/* Bus interface clock for ARAM */
+#define chipcHw_REG_BUS_CLOCK_HPM                       0x00000008	/* Bus interface clock for HPM */
+#define chipcHw_REG_BUS_CLOCK_DDRC                      0x00000010	/* Bus interface clock for DDRC */
+#define chipcHw_REG_BUS_CLOCK_DMAC0                     0x00000020	/* Bus interface clock for DMAC0 */
+#define chipcHw_REG_BUS_CLOCK_DMAC1                     0x00000040	/* Bus interface clock for DMAC1 */
+#define chipcHw_REG_BUS_CLOCK_NVI                       0x00000080	/* Bus interface clock for NVI */
+#define chipcHw_REG_BUS_CLOCK_ESW                       0x00000100	/* Bus interface clock for ESW */
+#define chipcHw_REG_BUS_CLOCK_GE                        0x00000200	/* Bus interface clock for GE */
+#define chipcHw_REG_BUS_CLOCK_I2CH                      0x00000400	/* Bus interface clock for I2CH */
+#define chipcHw_REG_BUS_CLOCK_I2S0                      0x00000800	/* Bus interface clock for I2S0 */
+#define chipcHw_REG_BUS_CLOCK_I2S1                      0x00001000	/* Bus interface clock for I2S1 */
+#define chipcHw_REG_BUS_CLOCK_VRAM                      0x00002000	/* Bus interface clock for VRAM */
+#define chipcHw_REG_BUS_CLOCK_CLCD                      0x00004000	/* Bus interface clock for CLCD */
+#define chipcHw_REG_BUS_CLOCK_LDK                       0x00008000	/* Bus interface clock for LDK */
+#define chipcHw_REG_BUS_CLOCK_LED                       0x00010000	/* Bus interface clock for LED */
+#define chipcHw_REG_BUS_CLOCK_OTP                       0x00020000	/* Bus interface clock for OTP */
+#define chipcHw_REG_BUS_CLOCK_PIF                       0x00040000	/* Bus interface clock for PIF */
+#define chipcHw_REG_BUS_CLOCK_SPU                       0x00080000	/* Bus interface clock for SPU */
+#define chipcHw_REG_BUS_CLOCK_SDIO0                     0x00100000	/* Bus interface clock for SDIO0 */
+#define chipcHw_REG_BUS_CLOCK_SDIO1                     0x00200000	/* Bus interface clock for SDIO1 */
+#define chipcHw_REG_BUS_CLOCK_SPIH                      0x00400000	/* Bus interface clock for SPIH */
+#define chipcHw_REG_BUS_CLOCK_SPIS                      0x00800000	/* Bus interface clock for SPIS */
+#define chipcHw_REG_BUS_CLOCK_UART0                     0x01000000	/* Bus interface clock for UART0 */
+#define chipcHw_REG_BUS_CLOCK_UART1                     0x02000000	/* Bus interface clock for UART1 */
+#define chipcHw_REG_BUS_CLOCK_BBL                       0x04000000	/* Bus interface clock for BBL */
+#define chipcHw_REG_BUS_CLOCK_I2CS                      0x08000000	/* Bus interface clock for I2CS */
+#define chipcHw_REG_BUS_CLOCK_USBH                      0x10000000	/* Bus interface clock for USB Host */
+#define chipcHw_REG_BUS_CLOCK_USBD                      0x20000000	/* Bus interface clock for USB Device */
+#define chipcHw_REG_BUS_CLOCK_BROM                      0x40000000	/* Bus interface clock for Boot ROM */
+#define chipcHw_REG_BUS_CLOCK_TSC                       0x80000000	/* Bus interface clock for Touch screen */
+
+/* Software resets defines */
+#define chipcHw_REG_SOFT_RESET_VPM_GLOBAL_HOLD          0x0000000080000000ULL	/* Reset Global VPM and hold */
+#define chipcHw_REG_SOFT_RESET_VPM_HOLD                 0x0000000040000000ULL	/* Reset VPM and hold */
+#define chipcHw_REG_SOFT_RESET_VPM_GLOBAL               0x0000000020000000ULL	/* Reset Global VPM */
+#define chipcHw_REG_SOFT_RESET_VPM                      0x0000000010000000ULL	/* Reset VPM */
+#define chipcHw_REG_SOFT_RESET_KEYPAD                   0x0000000008000000ULL	/* Reset Key pad */
+#define chipcHw_REG_SOFT_RESET_LED                      0x0000000004000000ULL	/* Reset LED */
+#define chipcHw_REG_SOFT_RESET_SPU                      0x0000000002000000ULL	/* Reset SPU */
+#define chipcHw_REG_SOFT_RESET_RNG                      0x0000000001000000ULL	/* Reset RNG */
+#define chipcHw_REG_SOFT_RESET_PKA                      0x0000000000800000ULL	/* Reset PKA */
+#define chipcHw_REG_SOFT_RESET_LCD                      0x0000000000400000ULL	/* Reset LCD */
+#define chipcHw_REG_SOFT_RESET_PIF                      0x0000000000200000ULL	/* Reset PIF */
+#define chipcHw_REG_SOFT_RESET_I2CS                     0x0000000000100000ULL	/* Reset I2C Slave */
+#define chipcHw_REG_SOFT_RESET_I2CH                     0x0000000000080000ULL	/* Reset I2C Host */
+#define chipcHw_REG_SOFT_RESET_SDIO1                    0x0000000000040000ULL	/* Reset SDIO 1 */
+#define chipcHw_REG_SOFT_RESET_SDIO0                    0x0000000000020000ULL	/* Reset SDIO 0 */
+#define chipcHw_REG_SOFT_RESET_BBL                      0x0000000000010000ULL	/* Reset BBL */
+#define chipcHw_REG_SOFT_RESET_I2S1                     0x0000000000008000ULL	/* Reset I2S1 */
+#define chipcHw_REG_SOFT_RESET_I2S0                     0x0000000000004000ULL	/* Reset I2S0 */
+#define chipcHw_REG_SOFT_RESET_SPIS                     0x0000000000002000ULL	/* Reset SPI Slave */
+#define chipcHw_REG_SOFT_RESET_SPIH                     0x0000000000001000ULL	/* Reset SPI Host */
+#define chipcHw_REG_SOFT_RESET_GPIO1                    0x0000000000000800ULL	/* Reset GPIO block 1 */
+#define chipcHw_REG_SOFT_RESET_GPIO0                    0x0000000000000400ULL	/* Reset GPIO block 0 */
+#define chipcHw_REG_SOFT_RESET_UART1                    0x0000000000000200ULL	/* Reset UART 1 */
+#define chipcHw_REG_SOFT_RESET_UART0                    0x0000000000000100ULL	/* Reset UART 0 */
+#define chipcHw_REG_SOFT_RESET_NVI                      0x0000000000000080ULL	/* Reset NVI */
+#define chipcHw_REG_SOFT_RESET_WDOG                     0x0000000000000040ULL	/* Reset Watch dog */
+#define chipcHw_REG_SOFT_RESET_TMR                      0x0000000000000020ULL	/* Reset Timer */
+#define chipcHw_REG_SOFT_RESET_ETM                      0x0000000000000010ULL	/* Reset ETM */
+#define chipcHw_REG_SOFT_RESET_ARM_HOLD                 0x0000000000000008ULL	/* Reset ARM and HOLD */
+#define chipcHw_REG_SOFT_RESET_ARM                      0x0000000000000004ULL	/* Reset ARM */
+#define chipcHw_REG_SOFT_RESET_CHIP_WARM                0x0000000000000002ULL	/* Chip warm reset */
+#define chipcHw_REG_SOFT_RESET_CHIP_SOFT                0x0000000000000001ULL	/* Chip soft reset */
+#define chipcHw_REG_SOFT_RESET_VDEC                     0x0000100000000000ULL	/* Video decoder */
+#define chipcHw_REG_SOFT_RESET_GE                       0x0000080000000000ULL	/* Graphics engine */
+#define chipcHw_REG_SOFT_RESET_OTP                      0x0000040000000000ULL	/* Reset OTP */
+#define chipcHw_REG_SOFT_RESET_USB2                     0x0000020000000000ULL	/* Reset USB2 */
+#define chipcHw_REG_SOFT_RESET_USB1                     0x0000010000000000ULL	/* Reset USB 1 */
+#define chipcHw_REG_SOFT_RESET_USB                      0x0000008000000000ULL	/* Reset USB 1 and USB2 soft reset */
+#define chipcHw_REG_SOFT_RESET_ESW                      0x0000004000000000ULL	/* Reset Ethernet switch */
+#define chipcHw_REG_SOFT_RESET_ESWCLK                   0x0000002000000000ULL	/* Reset Ethernet switch clock */
+#define chipcHw_REG_SOFT_RESET_DDRPHY                   0x0000001000000000ULL	/* Reset DDR Physical */
+#define chipcHw_REG_SOFT_RESET_DDR                      0x0000000800000000ULL	/* Reset DDR Controller */
+#define chipcHw_REG_SOFT_RESET_TSC                      0x0000000400000000ULL	/* Reset Touch screen */
+#define chipcHw_REG_SOFT_RESET_PCM                      0x0000000200000000ULL	/* Reset PCM device */
+#define chipcHw_REG_SOFT_RESET_APM                      0x0000200100000000ULL	/* Reset APM device */
+
+#define chipcHw_REG_SOFT_RESET_VPM_GLOBAL_UNHOLD        0x8000000000000000ULL	/* Unhold Global VPM */
+#define chipcHw_REG_SOFT_RESET_VPM_UNHOLD               0x4000000000000000ULL	/* Unhold VPM */
+#define chipcHw_REG_SOFT_RESET_ARM_UNHOLD               0x2000000000000000ULL	/* Unhold ARM reset  */
+#define chipcHw_REG_SOFT_RESET_UNHOLD_MASK              0xF000000000000000ULL	/* Mask to handle unhold request */
+
+/* Audio channel control defines */
+#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_ALL            0x00000001	/* Enable all audio channel */
+#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_A              0x00000002	/* Enable channel A */
+#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_B              0x00000004	/* Enable channel B */
+#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_C              0x00000008	/* Enable channel C */
+#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_NTP_CLOCK      0x00000010	/* Enable NTP clock */
+#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_PCM0_CLOCK     0x00000020	/* Enable PCM0 clock */
+#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_PCM1_CLOCK     0x00000040	/* Enable PCM1 clock */
+#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_APM_CLOCK      0x00000080	/* Enable APM clock */
+
+/* Misc. chip control defines */
+#define chipcHw_REG_MISC_CTRL_GE_SEL                    0x00040000	/* Select GE2/GE3 */
+#define chipcHw_REG_MISC_CTRL_I2S1_CLOCK_ONCHIP         0x00000000	/* Use on chip clock for I2S1 */
+#define chipcHw_REG_MISC_CTRL_I2S1_CLOCK_GPIO           0x00020000	/* Use external clock via GPIO pin 26 for I2S1 */
+#define chipcHw_REG_MISC_CTRL_I2S0_CLOCK_ONCHIP         0x00000000	/* Use on chip clock for I2S0 */
+#define chipcHw_REG_MISC_CTRL_I2S0_CLOCK_GPIO           0x00010000	/* Use external clock via GPIO pin 45 for I2S0 */
+#define chipcHw_REG_MISC_CTRL_ARM_CP15_DISABLE          0x00008000	/* Disable ARM CP15 bit */
+#define chipcHw_REG_MISC_CTRL_RTC_DISABLE               0x00000008	/* Disable RTC registers */
+#define chipcHw_REG_MISC_CTRL_BBRAM_DISABLE             0x00000004	/* Disable Battery Backed RAM */
+#define chipcHw_REG_MISC_CTRL_USB_MODE_HOST             0x00000002	/* Set USB as host */
+#define chipcHw_REG_MISC_CTRL_USB_MODE_DEVICE           0xFFFFFFFD	/* Set USB as device */
+#define chipcHw_REG_MISC_CTRL_USB_POWERON               0xFFFFFFFE	/* Power up USB */
+#define chipcHw_REG_MISC_CTRL_USB_POWEROFF              0x00000001	/* Power down USB */
+
+/* OTP configuration defines */
+#define chipcHw_REG_OTP_SECURITY_OFF                    0x0000020000000000ULL	/* Security support is OFF */
+#define chipcHw_REG_OTP_SPU_SLOW                        0x0000010000000000ULL	/* Limited SPU throughput */
+#define chipcHw_REG_OTP_LCD_SPEED                       0x0000000600000000ULL	/* Set VPM speed one */
+#define chipcHw_REG_OTP_VPM_SPEED_1                     0x0000000100000000ULL	/* Set VPM speed one */
+#define chipcHw_REG_OTP_VPM_SPEED_0                     0x0000000080000000ULL	/* Set VPM speed zero */
+#define chipcHw_REG_OTP_AXI_SPEED                       0x0000000060000000ULL	/* Set maximum AXI bus speed */
+#define chipcHw_REG_OTP_APM_DISABLE                     0x000000001F000000ULL	/* Disable APM */
+#define chipcHw_REG_OTP_PIF_DISABLE                     0x0000000000200000ULL	/* Disable PIF */
+#define chipcHw_REG_OTP_VDEC_DISABLE                    0x0000000000100000ULL	/* Disable Video decoder */
+#define chipcHw_REG_OTP_BBL_DISABLE                     0x0000000000080000ULL	/* Disable RTC and BBRAM */
+#define chipcHw_REG_OTP_LED_DISABLE                     0x0000000000040000ULL	/* Disable LED */
+#define chipcHw_REG_OTP_GE_DISABLE                      0x0000000000020000ULL	/* Disable Graphics Engine */
+#define chipcHw_REG_OTP_LCD_DISABLE                     0x0000000000010000ULL	/* Disable LCD */
+#define chipcHw_REG_OTP_KEYPAD_DISABLE                  0x0000000000008000ULL	/* Disable keypad */
+#define chipcHw_REG_OTP_UART_DISABLE                    0x0000000000004000ULL	/* Disable UART */
+#define chipcHw_REG_OTP_SDIOH_DISABLE                   0x0000000000003000ULL	/* Disable SDIO host */
+#define chipcHw_REG_OTP_HSS_DISABLE                     0x0000000000000C00ULL	/* Disable HSS */
+#define chipcHw_REG_OTP_TSC_DISABLE                     0x0000000000000200ULL	/* Disable touch screen */
+#define chipcHw_REG_OTP_USB_DISABLE                     0x0000000000000180ULL	/* Disable USB */
+#define chipcHw_REG_OTP_SGMII_DISABLE                   0x0000000000000060ULL	/* Disable SGMII */
+#define chipcHw_REG_OTP_ETH_DISABLE                     0x0000000000000018ULL	/* Disable gigabit ethernet */
+#define chipcHw_REG_OTP_ETH_PHY_DISABLE                 0x0000000000000006ULL	/* Disable ethernet PHY */
+#define chipcHw_REG_OTP_VPM_DISABLE                     0x0000000000000001ULL	/* Disable VPM */
+
+/* Sticky bit defines */
+#define chipcHw_REG_STICKY_BOOT_DONE                    0x00000001	/* Boot done */
+#define chipcHw_REG_STICKY_SOFT_RESET                   0x00000002	/* ARM soft reset */
+#define chipcHw_REG_STICKY_GENERAL_1                    0x00000004	/* General purpose bit 1 */
+#define chipcHw_REG_STICKY_GENERAL_2                    0x00000008	/* General purpose bit 2 */
+#define chipcHw_REG_STICKY_GENERAL_3                    0x00000010	/* General purpose bit 3 */
+#define chipcHw_REG_STICKY_GENERAL_4                    0x00000020	/* General purpose bit 4 */
+#define chipcHw_REG_STICKY_GENERAL_5                    0x00000040	/* General purpose bit 5 */
+#define chipcHw_REG_STICKY_POR_BROM                     0x00000080	/* Special sticky bit for security - set in BROM to avoid other modes being entered */
+#define chipcHw_REG_STICKY_ARM_RESET                    0x00000100	/* ARM reset */
+#define chipcHw_REG_STICKY_CHIP_SOFT_RESET              0x00000200	/* Chip soft reset */
+#define chipcHw_REG_STICKY_CHIP_WARM_RESET              0x00000400	/* Chip warm reset */
+#define chipcHw_REG_STICKY_WDOG_RESET                   0x00000800	/* Watchdog reset */
+#define chipcHw_REG_STICKY_OTP_RESET                    0x00001000	/* OTP reset */
+
+							/* HW phase alignment defines *//* Spare1 register definitions */
+#define chipcHw_REG_SPARE1_DDR_PHASE_INTR_ENABLE        0x80000000	/* Enable DDR phase align panic interrupt */
+#define chipcHw_REG_SPARE1_VPM_PHASE_INTR_ENABLE        0x40000000	/* Enable VPM phase align panic interrupt */
+#define chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE        0x00000002	/* Enable access to VPM using system BUS */
+#define chipcHw_REG_SPARE1_DDR_BUS_ACCESS_ENABLE        0x00000001	/* Enable access to DDR using system BUS */
+							/* DDRPhaseCtrl1 register definitions */
+#define chipcHw_REG_DDR_SW_PHASE_CTRL_ENABLE            0x80000000	/* Enable DDR SW phase alignment */
+#define chipcHw_REG_DDR_HW_PHASE_CTRL_ENABLE            0x40000000	/* Enable DDR HW phase alignment */
+#define chipcHw_REG_DDR_PHASE_VALUE_GE_MASK             0x0000007F	/* DDR lower threshold for phase alignment */
+#define chipcHw_REG_DDR_PHASE_VALUE_GE_SHIFT            23
+#define chipcHw_REG_DDR_PHASE_VALUE_LE_MASK             0x0000007F	/* DDR upper threshold for phase alignment */
+#define chipcHw_REG_DDR_PHASE_VALUE_LE_SHIFT            16
+#define chipcHw_REG_DDR_PHASE_ALIGN_WAIT_CYCLE_MASK     0x0000FFFF	/* BUS Cycle to wait to run next DDR phase alignment */
+#define chipcHw_REG_DDR_PHASE_ALIGN_WAIT_CYCLE_SHIFT    0
+							/* VPMPhaseCtrl1 register definitions */
+#define chipcHw_REG_VPM_SW_PHASE_CTRL_ENABLE            0x80000000	/* Enable VPM SW phase alignment */
+#define chipcHw_REG_VPM_HW_PHASE_CTRL_ENABLE            0x40000000	/* Enable VPM HW phase alignment */
+#define chipcHw_REG_VPM_PHASE_VALUE_GE_MASK             0x0000007F	/* VPM lower threshold for phase alignment */
+#define chipcHw_REG_VPM_PHASE_VALUE_GE_SHIFT            23
+#define chipcHw_REG_VPM_PHASE_VALUE_LE_MASK             0x0000007F	/* VPM upper threshold for phase alignment */
+#define chipcHw_REG_VPM_PHASE_VALUE_LE_SHIFT            16
+#define chipcHw_REG_VPM_PHASE_ALIGN_WAIT_CYCLE_MASK     0x0000FFFF	/* BUS Cycle to wait to complete the VPM phase alignment */
+#define chipcHw_REG_VPM_PHASE_ALIGN_WAIT_CYCLE_SHIFT    0
+							/* PhaseAlignStatus register definitions */
+#define chipcHw_REG_DDR_TIMEOUT_INTR_STATUS             0x80000000	/* DDR time out interrupt status */
+#define chipcHw_REG_DDR_PHASE_STATUS_MASK               0x0000007F	/* DDR phase status value */
+#define chipcHw_REG_DDR_PHASE_STATUS_SHIFT              24
+#define chipcHw_REG_DDR_PHASE_ALIGNED                   0x00800000	/* DDR Phase aligned status */
+#define chipcHw_REG_DDR_LOAD                            0x00400000	/* Load DDR phase status */
+#define chipcHw_REG_DDR_PHASE_CTRL_MASK                 0x0000003F	/* DDR phase control value */
+#define chipcHw_REG_DDR_PHASE_CTRL_SHIFT                16
+#define chipcHw_REG_VPM_TIMEOUT_INTR_STATUS             0x80000000	/* VPM time out interrupt status */
+#define chipcHw_REG_VPM_PHASE_STATUS_MASK               0x0000007F	/* VPM phase status value */
+#define chipcHw_REG_VPM_PHASE_STATUS_SHIFT              8
+#define chipcHw_REG_VPM_PHASE_ALIGNED                   0x00000080	/* VPM Phase aligned status */
+#define chipcHw_REG_VPM_LOAD                            0x00000040	/* Load VPM phase status */
+#define chipcHw_REG_VPM_PHASE_CTRL_MASK                 0x0000003F	/* VPM phase control value */
+#define chipcHw_REG_VPM_PHASE_CTRL_SHIFT                0
+							/* DDRPhaseCtrl2 register definitions */
+#define chipcHw_REG_DDR_INTR_SERVICED                   0x02000000	/* Acknowledge that interrupt was serviced */
+#define chipcHw_REG_DDR_TIMEOUT_INTR_ENABLE             0x01000000	/* Enable time out interrupt */
+#define chipcHw_REG_DDR_LOAD_COUNT_PHASE_CTRL_MASK      0x0000000F	/* Wait before toggling load_ch */
+#define chipcHw_REG_DDR_LOAD_COUNT_PHASE_CTRL_SHIFT     20
+#define chipcHw_REG_DDR_TOTAL_LOAD_COUNT_CTRL_MASK      0x0000000F	/* Total wait to settle ph_ctrl and load_ch */
+#define chipcHw_REG_DDR_TOTAL_LOAD_COUNT_CTRL_SHIFT     16
+#define chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_MASK        0x0000FFFF	/* Time out value for DDR HW phase alignment */
+#define chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_SHIFT       0
+							/* VPMPhaseCtrl2 register definitions */
+#define chipcHw_REG_VPM_INTR_SELECT_MASK                0x00000003	/* Interrupt select */
+#define chipcHw_REG_VPM_INTR_SELECT_SHIFT               26
+#define chipcHw_REG_VPM_INTR_DISABLE                    0x00000000
+#define chipcHw_REG_VPM_INTR_FAST                       (0x1 << chipcHw_REG_VPM_INTR_SELECT_SHIFT)
+#define chipcHw_REG_VPM_INTR_MEDIUM                     (0x2 << chipcHw_REG_VPM_INTR_SELECT_SHIFT)
+#define chipcHw_REG_VPM_INTR_SLOW                       (0x3 << chipcHw_REG_VPM_INTR_SELECT_SHIFT)
+#define chipcHw_REG_VPM_INTR_SERVICED                   0x02000000	/* Acknowledge that interrupt was serviced */
+#define chipcHw_REG_VPM_TIMEOUT_INTR_ENABLE             0x01000000	/* Enable time out interrupt */
+#define chipcHw_REG_VPM_LOAD_COUNT_PHASE_CTRL_MASK      0x0000000F	/* Wait before toggling load_ch */
+#define chipcHw_REG_VPM_LOAD_COUNT_PHASE_CTRL_SHIFT     20
+#define chipcHw_REG_VPM_TOTAL_LOAD_COUNT_CTRL_MASK      0x0000000F	/* Total wait cycle to settle ph_ctrl and load_ch */
+#define chipcHw_REG_VPM_TOTAL_LOAD_COUNT_CTRL_SHIFT     16
+#define chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_MASK        0x0000FFFF	/* Time out value for VPM HW phase alignment */
+#define chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_SHIFT       0
+
+#endif /* CHIPCHW_REG_H */
-- 
cgit v1.2.3


From 2c4b57a204669a7b649f3eb891d3d0f0eba75321 Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Fri, 7 Aug 2009 20:05:37 +0100
Subject: ARM: 5655/1: bcmring: add csp chipc hardware definition file

add csp chipc hardware definition file

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 .../mach-bcmring/include/mach/csp/chipcHw_def.h    | 1123 ++++++++++++++++++++
 1 file changed, 1123 insertions(+)
 create mode 100644 arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h

(limited to 'arch')

diff --git a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h
new file mode 100644
index 00000000000..70eaea866cf
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h
@@ -0,0 +1,1123 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef CHIPC_DEF_H
+#define CHIPC_DEF_H
+
+/* ---- Include Files ----------------------------------------------------- */
+
+#include <csp/stdint.h>
+#include <csp/errno.h>
+#include <csp/reg.h>
+#include <mach/csp/chipcHw_reg.h>
+
+/* ---- Public Constants and Types ---------------------------------------- */
+
+/* Set 1 to configure DDR/VPM phase alignment by HW */
+#define chipcHw_DDR_HW_PHASE_ALIGN    0
+#define chipcHw_VPM_HW_PHASE_ALIGN    0
+
+typedef uint32_t chipcHw_freq;
+
+/* Configurable miscellaneous clocks */
+typedef enum {
+	chipcHw_CLOCK_DDR,	/* DDR PHY Clock */
+	chipcHw_CLOCK_ARM,	/* ARM Clock */
+	chipcHw_CLOCK_ESW,	/* Ethernet Switch Clock */
+	chipcHw_CLOCK_VPM,	/* VPM Clock */
+	chipcHw_CLOCK_ESW125,	/* Ethernet MII Clock */
+	chipcHw_CLOCK_UART,	/* UART Clock */
+	chipcHw_CLOCK_SDIO0,	/* SDIO 0 Clock */
+	chipcHw_CLOCK_SDIO1,	/* SDIO 1 Clock */
+	chipcHw_CLOCK_SPI,	/* SPI Clock */
+	chipcHw_CLOCK_ETM,	/* ARM ETM Clock */
+
+	chipcHw_CLOCK_BUS,	/* BUS Clock */
+	chipcHw_CLOCK_OTP,	/* OTP Clock */
+	chipcHw_CLOCK_I2C,	/* I2C Host Clock */
+	chipcHw_CLOCK_I2S0,	/* I2S 0 Host Clock */
+	chipcHw_CLOCK_RTBUS,	/* DDR PHY Configuration Clock */
+	chipcHw_CLOCK_APM100,	/* APM100 Clock */
+	chipcHw_CLOCK_TSC,	/* Touch screen Clock */
+	chipcHw_CLOCK_LED,	/* LED Clock */
+
+	chipcHw_CLOCK_USB,	/* USB Clock */
+	chipcHw_CLOCK_LCD,	/* LCD CLock */
+	chipcHw_CLOCK_APM,	/* APM Clock */
+
+	chipcHw_CLOCK_I2S1,	/* I2S 1 Host Clock */
+} chipcHw_CLOCK_e;
+
+/* System booting strap options */
+typedef enum {
+	chipcHw_BOOT_DEVICE_UART = chipcHw_STRAPS_BOOT_DEVICE_UART,
+	chipcHw_BOOT_DEVICE_SERIAL_FLASH =
+	    chipcHw_STRAPS_BOOT_DEVICE_SERIAL_FLASH,
+	chipcHw_BOOT_DEVICE_NOR_FLASH_16 =
+	    chipcHw_STRAPS_BOOT_DEVICE_NOR_FLASH_16,
+	chipcHw_BOOT_DEVICE_NAND_FLASH_8 =
+	    chipcHw_STRAPS_BOOT_DEVICE_NAND_FLASH_8,
+	chipcHw_BOOT_DEVICE_NAND_FLASH_16 =
+	    chipcHw_STRAPS_BOOT_DEVICE_NAND_FLASH_16
+} chipcHw_BOOT_DEVICE_e;
+
+/* System booting modes */
+typedef enum {
+	chipcHw_BOOT_MODE_NORMAL = chipcHw_STRAPS_BOOT_MODE_NORMAL,
+	chipcHw_BOOT_MODE_DBG_SW = chipcHw_STRAPS_BOOT_MODE_DBG_SW,
+	chipcHw_BOOT_MODE_DBG_BOOT = chipcHw_STRAPS_BOOT_MODE_DBG_BOOT,
+	chipcHw_BOOT_MODE_NORMAL_QUIET = chipcHw_STRAPS_BOOT_MODE_NORMAL_QUIET
+} chipcHw_BOOT_MODE_e;
+
+/* NAND Flash page size strap options */
+typedef enum {
+	chipcHw_NAND_PAGESIZE_512 = chipcHw_STRAPS_NAND_PAGESIZE_512,
+	chipcHw_NAND_PAGESIZE_2048 = chipcHw_STRAPS_NAND_PAGESIZE_2048,
+	chipcHw_NAND_PAGESIZE_4096 = chipcHw_STRAPS_NAND_PAGESIZE_4096,
+	chipcHw_NAND_PAGESIZE_EXT = chipcHw_STRAPS_NAND_PAGESIZE_EXT
+} chipcHw_NAND_PAGESIZE_e;
+
+/* GPIO Pin function */
+typedef enum {
+	chipcHw_GPIO_FUNCTION_KEYPAD = chipcHw_REG_GPIO_MUX_KEYPAD,
+	chipcHw_GPIO_FUNCTION_I2CH = chipcHw_REG_GPIO_MUX_I2CH,
+	chipcHw_GPIO_FUNCTION_SPI = chipcHw_REG_GPIO_MUX_SPI,
+	chipcHw_GPIO_FUNCTION_UART = chipcHw_REG_GPIO_MUX_UART,
+	chipcHw_GPIO_FUNCTION_LEDMTXP = chipcHw_REG_GPIO_MUX_LEDMTXP,
+	chipcHw_GPIO_FUNCTION_LEDMTXS = chipcHw_REG_GPIO_MUX_LEDMTXS,
+	chipcHw_GPIO_FUNCTION_SDIO0 = chipcHw_REG_GPIO_MUX_SDIO0,
+	chipcHw_GPIO_FUNCTION_SDIO1 = chipcHw_REG_GPIO_MUX_SDIO1,
+	chipcHw_GPIO_FUNCTION_PCM = chipcHw_REG_GPIO_MUX_PCM,
+	chipcHw_GPIO_FUNCTION_I2S = chipcHw_REG_GPIO_MUX_I2S,
+	chipcHw_GPIO_FUNCTION_ETM = chipcHw_REG_GPIO_MUX_ETM,
+	chipcHw_GPIO_FUNCTION_DEBUG = chipcHw_REG_GPIO_MUX_DEBUG,
+	chipcHw_GPIO_FUNCTION_MISC = chipcHw_REG_GPIO_MUX_MISC,
+	chipcHw_GPIO_FUNCTION_GPIO = chipcHw_REG_GPIO_MUX_GPIO
+} chipcHw_GPIO_FUNCTION_e;
+
+/* PIN Output slew rate */
+typedef enum {
+	chipcHw_PIN_SLEW_RATE_HIGH = chipcHw_REG_SLEW_RATE_HIGH,
+	chipcHw_PIN_SLEW_RATE_NORMAL = chipcHw_REG_SLEW_RATE_NORMAL
+} chipcHw_PIN_SLEW_RATE_e;
+
+/* PIN Current drive strength */
+typedef enum {
+	chipcHw_PIN_CURRENT_STRENGTH_2mA = chipcHw_REG_CURRENT_STRENGTH_2mA,
+	chipcHw_PIN_CURRENT_STRENGTH_4mA = chipcHw_REG_CURRENT_STRENGTH_4mA,
+	chipcHw_PIN_CURRENT_STRENGTH_6mA = chipcHw_REG_CURRENT_STRENGTH_6mA,
+	chipcHw_PIN_CURRENT_STRENGTH_8mA = chipcHw_REG_CURRENT_STRENGTH_8mA,
+	chipcHw_PIN_CURRENT_STRENGTH_10mA = chipcHw_REG_CURRENT_STRENGTH_10mA,
+	chipcHw_PIN_CURRENT_STRENGTH_12mA = chipcHw_REG_CURRENT_STRENGTH_12mA
+} chipcHw_PIN_CURRENT_STRENGTH_e;
+
+/* PIN Pull up register settings */
+typedef enum {
+	chipcHw_PIN_PULL_NONE = chipcHw_REG_PULL_NONE,
+	chipcHw_PIN_PULL_UP = chipcHw_REG_PULL_UP,
+	chipcHw_PIN_PULL_DOWN = chipcHw_REG_PULL_DOWN
+} chipcHw_PIN_PULL_e;
+
+/* PIN input type settings */
+typedef enum {
+	chipcHw_PIN_INPUTTYPE_CMOS = chipcHw_REG_INPUTTYPE_CMOS,
+	chipcHw_PIN_INPUTTYPE_ST = chipcHw_REG_INPUTTYPE_ST
+} chipcHw_PIN_INPUTTYPE_e;
+
+/* Allow/Disalow the support of spread spectrum  */
+typedef enum {
+	chipcHw_SPREAD_SPECTRUM_DISALLOW,	/* Spread spectrum support is not allowed */
+	chipcHw_SPREAD_SPECTRUM_ALLOW	/* Spread spectrum support is allowed */
+} chipcHw_SPREAD_SPECTRUM_e;
+
+typedef struct {
+	chipcHw_SPREAD_SPECTRUM_e ssSupport;	/* Allow/Disalow to support spread spectrum.
+						   If supported, call chipcHw_enableSpreadSpectrum ()
+						   to activate the spread spectrum with desired spread. */
+	uint32_t pllVcoFreqHz;	/* PLL VCO frequency in Hz */
+	uint32_t pll2VcoFreqHz;	/* PLL2 VCO frequency in Hz */
+	uint32_t busClockFreqHz;	/* Bus clock frequency in Hz */
+	uint32_t armBusRatio;	/* ARM clock : Bus clock */
+	uint32_t vpmBusRatio;	/* VPM clock : Bus clock */
+	uint32_t ddrBusRatio;	/* DDR clock : Bus clock */
+} chipcHw_INIT_PARAM_t;
+
+/* CHIP revision number */
+typedef enum {
+	chipcHw_REV_NUMBER_A0 = chipcHw_REG_REV_A0,
+	chipcHw_REV_NUMBER_B0 = chipcHw_REG_REV_B0
+} chipcHw_REV_NUMBER_e;
+
+typedef enum {
+	chipcHw_VPM_HW_PHASE_INTR_DISABLE = chipcHw_REG_VPM_INTR_DISABLE,
+	chipcHw_VPM_HW_PHASE_INTR_FAST = chipcHw_REG_VPM_INTR_FAST,
+	chipcHw_VPM_HW_PHASE_INTR_MEDIUM = chipcHw_REG_VPM_INTR_MEDIUM,
+	chipcHw_VPM_HW_PHASE_INTR_SLOW = chipcHw_REG_VPM_INTR_SLOW
+} chipcHw_VPM_HW_PHASE_INTR_e;
+
+typedef enum {
+	chipcHw_DDR_HW_PHASE_MARGIN_STRICT,	/*  Strict margin for DDR phase align condition */
+	chipcHw_DDR_HW_PHASE_MARGIN_MEDIUM,	/*  Medium margin for DDR phase align condition */
+	chipcHw_DDR_HW_PHASE_MARGIN_WIDE	/*  Wider margin for DDR phase align condition */
+} chipcHw_DDR_HW_PHASE_MARGIN_e;
+
+typedef enum {
+	chipcHw_VPM_HW_PHASE_MARGIN_STRICT,	/*  Strict margin for VPM phase align condition */
+	chipcHw_VPM_HW_PHASE_MARGIN_MEDIUM,	/*  Medium margin for VPM phase align condition */
+	chipcHw_VPM_HW_PHASE_MARGIN_WIDE	/*  Wider margin for VPM phase align condition */
+} chipcHw_VPM_HW_PHASE_MARGIN_e;
+
+#define chipcHw_XTAL_FREQ_Hz                    25000000	/* Reference clock frequency in Hz */
+
+/* Programable pin defines */
+#define chipcHw_PIN_GPIO(n)                     ((((n) >= 0) && ((n) < (chipcHw_GPIO_COUNT))) ? (n) : 0xFFFFFFFF)
+									     /* GPIO pin 0 - 60 */
+#define chipcHw_PIN_UARTTXD                     (chipcHw_GPIO_COUNT + 0)	/* UART Transmit */
+#define chipcHw_PIN_NVI_A                       (chipcHw_GPIO_COUNT + 1)	/* NVI Interface */
+#define chipcHw_PIN_NVI_D                       (chipcHw_GPIO_COUNT + 2)	/* NVI Interface */
+#define chipcHw_PIN_NVI_OEB                     (chipcHw_GPIO_COUNT + 3)	/* NVI Interface */
+#define chipcHw_PIN_NVI_WEB                     (chipcHw_GPIO_COUNT + 4)	/* NVI Interface */
+#define chipcHw_PIN_NVI_CS                      (chipcHw_GPIO_COUNT + 5)	/* NVI Interface */
+#define chipcHw_PIN_NVI_NAND_CSB                (chipcHw_GPIO_COUNT + 6)	/* NVI Interface */
+#define chipcHw_PIN_NVI_FLASHWP                 (chipcHw_GPIO_COUNT + 7)	/* NVI Interface */
+#define chipcHw_PIN_NVI_NAND_RDYB               (chipcHw_GPIO_COUNT + 8)	/* NVI Interface */
+#define chipcHw_PIN_CL_DATA_0_17                (chipcHw_GPIO_COUNT + 9)	/* LCD Data 0 - 17 */
+#define chipcHw_PIN_CL_DATA_18_20               (chipcHw_GPIO_COUNT + 10)	/* LCD Data 18 - 20 */
+#define chipcHw_PIN_CL_DATA_21_23               (chipcHw_GPIO_COUNT + 11)	/* LCD Data 21 - 23 */
+#define chipcHw_PIN_CL_POWER                    (chipcHw_GPIO_COUNT + 12)	/* LCD Power */
+#define chipcHw_PIN_CL_ACK                      (chipcHw_GPIO_COUNT + 13)	/* LCD Ack */
+#define chipcHw_PIN_CL_FP                       (chipcHw_GPIO_COUNT + 14)	/* LCD FP */
+#define chipcHw_PIN_CL_LP                       (chipcHw_GPIO_COUNT + 15)	/* LCD LP */
+#define chipcHw_PIN_UARTRXD                     (chipcHw_GPIO_COUNT + 16)	/* UART Receive */
+
+/* ---- Public Variable Externs ------------------------------------------ */
+/* ---- Public Function Prototypes --------------------------------------- */
+
+/****************************************************************************/
+/**
+*  @brief  Initializes the clock module
+*
+*/
+/****************************************************************************/
+void chipcHw_Init(chipcHw_INIT_PARAM_t *initParam	/*  [ IN ] Misc chip initialization parameter */
+    ) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+*  @brief  Enables the PLL1
+*
+*  This function enables the PLL1
+*
+*/
+/****************************************************************************/
+void chipcHw_pll1Enable(uint32_t vcoFreqHz,	/*  [ IN ] VCO frequency in Hz */
+			chipcHw_SPREAD_SPECTRUM_e ssSupport	/*  [ IN ] SS status */
+    ) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+*  @brief  Enables the PLL2
+*
+*  This function enables the PLL2
+*
+*/
+/****************************************************************************/
+void chipcHw_pll2Enable(uint32_t vcoFreqHz	/*  [ IN ] VCO frequency in Hz */
+    ) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+*  @brief  Disable the PLL1
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_pll1Disable(void);
+
+/****************************************************************************/
+/**
+*  @brief  Disable the PLL2
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_pll2Disable(void);
+
+/****************************************************************************/
+/**
+*  @brief   Set clock fequency for miscellaneous configurable clocks
+*
+*  This function sets clock frequency
+*
+*  @return  Configured clock frequency in KHz
+*
+*/
+/****************************************************************************/
+chipcHw_freq chipcHw_getClockFrequency(chipcHw_CLOCK_e clock	/*  [ IN ] Configurable clock */
+    ) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+*  @brief   Set clock fequency for miscellaneous configurable clocks
+*
+*  This function sets clock frequency
+*
+*  @return  Configured clock frequency in Hz
+*
+*/
+/****************************************************************************/
+chipcHw_freq chipcHw_setClockFrequency(chipcHw_CLOCK_e clock,	/*  [ IN ] Configurable clock */
+				       uint32_t freq	/*  [ IN ] Clock frequency in Hz */
+    ) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+*  @brief   Set VPM clock in sync with BUS clock
+*
+*  This function does the phase adjustment between VPM and BUS clock
+*
+*  @return >= 0 : On success ( # of adjustment required )
+*            -1 : On failure
+*/
+/****************************************************************************/
+int chipcHw_vpmPhaseAlign(void);
+
+/****************************************************************************/
+/**
+*  @brief   Enables core a clock of a certain device
+*
+*  This function enables a core clock
+*
+*  @return  void
+*
+*  @note    Doesnot affect the bus interface clock
+*/
+/****************************************************************************/
+static inline void chipcHw_setClockEnable(chipcHw_CLOCK_e clock	/*  [ IN ] Configurable clock */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Disabled a core clock of a certain device
+*
+*  This function disables a core clock
+*
+*  @return  void
+*
+*  @note    Doesnot affect the bus interface clock
+*/
+/****************************************************************************/
+static inline void chipcHw_setClockDisable(chipcHw_CLOCK_e clock	/*  [ IN ] Configurable clock */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Enables bypass clock of a certain device
+*
+*  This function enables bypass clock
+*
+*  @note    Doesnot affect the bus interface clock
+*/
+/****************************************************************************/
+static inline void chipcHw_bypassClockEnable(chipcHw_CLOCK_e clock	/*  [ IN ] Configurable clock */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Disabled bypass clock of a certain device
+*
+*  This function disables bypass clock
+*
+*  @note    Doesnot affect the bus interface clock
+*/
+/****************************************************************************/
+static inline void chipcHw_bypassClockDisable(chipcHw_CLOCK_e clock	/*  [ IN ] Configurable clock */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Get Numeric Chip ID
+*
+*  This function returns Chip ID that includes the revison number
+*
+*  @return  Complete numeric Chip ID
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getChipId(void);
+
+/****************************************************************************/
+/**
+*  @brief   Get Chip Product ID
+*
+*  This function returns Chip Product ID
+*
+*  @return  Chip Product ID
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getChipProductId(void);
+
+/****************************************************************************/
+/**
+*  @brief   Get revision number
+*
+*  This function returns revision number of the chip
+*
+*  @return  Revision number
+*/
+/****************************************************************************/
+static inline chipcHw_REV_NUMBER_e chipcHw_getChipRevisionNumber(void);
+
+/****************************************************************************/
+/**
+*  @brief   Enables bus interface clock
+*
+*  Enables  bus interface clock of various device
+*
+*  @return  void
+*
+*  @note    use chipcHw_REG_BUS_CLOCK_XXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_busInterfaceClockEnable(uint32_t mask	/*  [ IN ] Bit map of type  chipcHw_REG_BUS_CLOCK_XXXXX */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Disables bus interface clock
+*
+*  Disables  bus interface clock of various device
+*
+*  @return  void
+*
+*  @note    use chipcHw_REG_BUS_CLOCK_XXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_busInterfaceClockDisable(uint32_t mask	/*  [ IN ] Bit map of type  chipcHw_REG_BUS_CLOCK_XXXXX */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Enables various audio channels
+*
+*  Enables audio channel
+*
+*  @return  void
+*
+*  @note    use chipcHw_REG_AUDIO_CHANNEL_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_audioChannelEnable(uint32_t mask	/*  [ IN ] Bit map of type  chipcHw_REG_AUDIO_CHANNEL_XXXXXX */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Disables various audio channels
+*
+*  Disables audio channel
+*
+*  @return  void
+*
+*  @note    use chipcHw_REG_AUDIO_CHANNEL_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_audioChannelDisable(uint32_t mask	/*  [ IN ] Bit map of type  chipcHw_REG_AUDIO_CHANNEL_XXXXXX */
+    );
+
+/****************************************************************************/
+/**
+*  @brief    Soft resets devices
+*
+*  Soft resets various devices
+*
+*  @return   void
+*
+*  @note     use chipcHw_REG_SOFT_RESET_XXXXXX defines
+*/
+/****************************************************************************/
+static inline void chipcHw_softReset(uint64_t mask	/*  [ IN ] Bit map of type chipcHw_REG_SOFT_RESET_XXXXXX */
+    );
+
+static inline void chipcHw_softResetDisable(uint64_t mask	/*  [ IN ] Bit map of type chipcHw_REG_SOFT_RESET_XXXXXX */
+    );
+
+static inline void chipcHw_softResetEnable(uint64_t mask	/*  [ IN ] Bit map of type chipcHw_REG_SOFT_RESET_XXXXXX */
+    );
+
+/****************************************************************************/
+/**
+*  @brief    Configures misc CHIP functionality
+*
+*  Configures CHIP functionality
+*
+*  @return   void
+*
+*  @note     use chipcHw_REG_MISC_CTRL_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_miscControl(uint32_t mask	/*  [ IN ] Bit map of type chipcHw_REG_MISC_CTRL_XXXXXX */
+    );
+
+static inline void chipcHw_miscControlDisable(uint32_t mask	/*  [ IN ] Bit map of type chipcHw_REG_MISC_CTRL_XXXXXX */
+    );
+
+static inline void chipcHw_miscControlEnable(uint32_t mask	/*  [ IN ] Bit map of type chipcHw_REG_MISC_CTRL_XXXXXX */
+    );
+
+/****************************************************************************/
+/**
+*  @brief    Set OTP options
+*
+*  Set OTP options
+*
+*  @return   void
+*
+*  @note     use chipcHw_REG_OTP_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_setOTPOption(uint64_t mask	/*  [ IN ] Bit map of type chipcHw_REG_OTP_XXXXXX */
+    );
+
+/****************************************************************************/
+/**
+*  @brief    Get sticky bits
+*
+*  @return   Sticky bit options of type chipcHw_REG_STICKY_XXXXXX
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getStickyBits(void);
+
+/****************************************************************************/
+/**
+*  @brief    Set sticky bits
+*
+*  @return   void
+*
+*  @note     use chipcHw_REG_STICKY_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_setStickyBits(uint32_t mask	/*  [ IN ] Bit map of type chipcHw_REG_STICKY_XXXXXX */
+    );
+
+/****************************************************************************/
+/**
+*  @brief    Clear sticky bits
+*
+*  @return   void
+*
+*  @note     use chipcHw_REG_STICKY_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_clearStickyBits(uint32_t mask	/*  [ IN ] Bit map of type chipcHw_REG_STICKY_XXXXXX */
+    );
+
+/****************************************************************************/
+/**
+*  @brief    Get software override strap options
+*
+*  Retrieves software override strap options
+*
+*  @return   Software override strap value
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getSoftStraps(void);
+
+/****************************************************************************/
+/**
+*  @brief    Set software override strap options
+*
+*  set software override strap options
+*
+*  @return   nothing
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setSoftStraps(uint32_t strapOptions);
+
+/****************************************************************************/
+/**
+*  @brief    Get pin strap options
+*
+*  Retrieves pin strap options
+*
+*  @return   Pin strap value
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getPinStraps(void);
+
+/****************************************************************************/
+/**
+*  @brief    Get valid pin strap options
+*
+*  Retrieves valid pin strap options
+*
+*  @return   valid Pin strap value
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getValidStraps(void);
+
+/****************************************************************************/
+/**
+*  @brief    Initialize valid pin strap options
+*
+*  Retrieves valid pin strap options by copying HW strap options to soft register
+*  (if chipcHw_STRAPS_SOFT_OVERRIDE not set)
+*
+*  @return   nothing
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_initValidStraps(void);
+
+/****************************************************************************/
+/**
+*  @brief   Get status (enabled/disabled) of bus interface clock
+*
+*  This function returns the status of devices' bus interface clock
+*
+*  @return  Bus interface clock
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getBusInterfaceClockStatus(void);
+
+/****************************************************************************/
+/**
+*  @brief   Get boot device
+*
+*  This function returns the device type used in booting the system
+*
+*  @return  Boot device of type chipcHw_BOOT_DEVICE_e
+*
+*/
+/****************************************************************************/
+static inline chipcHw_BOOT_DEVICE_e chipcHw_getBootDevice(void);
+
+/****************************************************************************/
+/**
+*  @brief   Get boot mode
+*
+*  This function returns the way the system was booted
+*
+*  @return  Boot mode of type chipcHw_BOOT_MODE_e
+*
+*/
+/****************************************************************************/
+static inline chipcHw_BOOT_MODE_e chipcHw_getBootMode(void);
+
+/****************************************************************************/
+/**
+*  @brief   Get NAND flash page size
+*
+*  This function returns the NAND device page size
+*
+*  @return  Boot NAND device page size
+*
+*/
+/****************************************************************************/
+static inline chipcHw_NAND_PAGESIZE_e chipcHw_getNandPageSize(void);
+
+/****************************************************************************/
+/**
+*  @brief   Get NAND flash address cycle configuration
+*
+*  This function returns the NAND flash address cycle configuration
+*
+*  @return  0 = Do not extra address cycle, 1 = Add extra cycle
+*
+*/
+/****************************************************************************/
+static inline int chipcHw_getNandExtraCycle(void);
+
+/****************************************************************************/
+/**
+*  @brief   Activates PIF interface
+*
+*  This function activates PIF interface by taking control of LCD pins
+*
+*  @note
+*       When activated, LCD pins will be defined as follows for PIF operation
+*
+*       CLD[17:0]  = pif_data[17:0]
+*       CLD[23:18] = pif_address[5:0]
+*       CLPOWER    = pif_wr_str
+*       CLCP       = pif_rd_str
+*       CLAC       = pif_hat1
+*       CLFP       = pif_hrdy1
+*       CLLP       = pif_hat2
+*       GPIO[42]   = pif_hrdy2
+*
+*       In PIF mode, "pif_hrdy2" overrides other shared function for GPIO[42] pin
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_activatePifInterface(void);
+
+/****************************************************************************/
+/**
+*  @brief   Activates LCD interface
+*
+*  This function activates LCD interface
+*
+*  @note
+*       When activated, LCD pins will be defined as follows
+*
+*       CLD[17:0]  = LCD data
+*       CLD[23:18] = LCD data
+*       CLPOWER    = LCD power
+*       CLCP       =
+*       CLAC       = LCD ack
+*       CLFP       =
+*       CLLP       =
+*/
+/****************************************************************************/
+static inline void chipcHw_activateLcdInterface(void);
+
+/****************************************************************************/
+/**
+*  @brief   Deactivates PIF/LCD interface
+*
+*  This function deactivates PIF/LCD interface
+*
+*  @note
+*       When deactivated LCD pins will be in rti-stated
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_deactivatePifLcdInterface(void);
+
+/****************************************************************************/
+/**
+*  @brief   Get to know the configuration of GPIO pin
+*
+*/
+/****************************************************************************/
+static inline chipcHw_GPIO_FUNCTION_e chipcHw_getGpioPinFunction(int pin	/* GPIO Pin number */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Configure GPIO pin function
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setGpioPinFunction(int pin,	/* GPIO Pin number */
+					      chipcHw_GPIO_FUNCTION_e func	/* Configuration function */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Set Pin slew rate
+*
+*  This function sets the slew of individual pin
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setPinSlewRate(uint32_t pin,	/* Pin of type chipcHw_PIN_XXXXX */
+					  chipcHw_PIN_SLEW_RATE_e slewRate	/* Pin slew rate */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Set Pin output drive current
+*
+*  This function sets output drive current of individual pin
+*
+*  Note: Avoid the use of the word 'current' since linux headers define this
+*        to be the current task.
+*/
+/****************************************************************************/
+static inline void chipcHw_setPinOutputCurrent(uint32_t pin,	/* Pin of type chipcHw_PIN_XXXXX */
+					       chipcHw_PIN_CURRENT_STRENGTH_e curr	/* Pin current rating */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Set Pin pullup register
+*
+*  This function sets pullup register of individual  pin
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setPinPullup(uint32_t pin,	/* Pin of type chipcHw_PIN_XXXXX */
+					chipcHw_PIN_PULL_e pullup	/* Pullup register settings */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Set Pin input type
+*
+*  This function sets input type of individual Pin
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setPinInputType(uint32_t pin,	/* Pin of type chipcHw_PIN_XXXXX */
+					   chipcHw_PIN_INPUTTYPE_e inputType	/* Pin input type */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Retrieves a string representation of the mux setting for a pin.
+*
+*  @return  Pointer to a character string.
+*/
+/****************************************************************************/
+
+const char *chipcHw_getGpioPinFunctionStr(int pin);
+
+/****************************************************************************/
+/**  @brief issue warmReset
+ */
+/****************************************************************************/
+void chipcHw_reset(uint32_t mask);
+
+/****************************************************************************/
+/**  @brief clock reconfigure
+ */
+/****************************************************************************/
+void chipcHw_clockReconfig(uint32_t busHz, uint32_t armRatio, uint32_t vpmRatio,
+			   uint32_t ddrRatio);
+
+/****************************************************************************/
+/**
+*  @brief   Enable Spread Spectrum
+*
+*  @note chipcHw_Init() must be called earlier
+*/
+/****************************************************************************/
+static inline void chipcHw_enableSpreadSpectrum(void);
+
+/****************************************************************************/
+/**
+*  @brief   Disable Spread Spectrum
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_disableSpreadSpectrum(void);
+
+/****************************************************************************/
+/**  @brief Checks if software strap is enabled
+ *
+ *   @return 1 : When enable
+ *           0 : When disable
+ */
+/****************************************************************************/
+static inline int chipcHw_isSoftwareStrapsEnable(void);
+
+/****************************************************************************/
+/**  @brief Enable software strap
+ */
+/****************************************************************************/
+static inline void chipcHw_softwareStrapsEnable(void);
+
+/****************************************************************************/
+/**  @brief Disable software strap
+ */
+/****************************************************************************/
+static inline void chipcHw_softwareStrapsDisable(void);
+
+/****************************************************************************/
+/**  @brief PLL test enable
+ */
+/****************************************************************************/
+static inline void chipcHw_pllTestEnable(void);
+
+/****************************************************************************/
+/**  @brief PLL2 test enable
+ */
+/****************************************************************************/
+static inline void chipcHw_pll2TestEnable(void);
+
+/****************************************************************************/
+/**  @brief PLL test disable
+ */
+/****************************************************************************/
+static inline void chipcHw_pllTestDisable(void);
+
+/****************************************************************************/
+/**  @brief PLL2 test disable
+ */
+/****************************************************************************/
+static inline void chipcHw_pll2TestDisable(void);
+
+/****************************************************************************/
+/**  @brief Get PLL test status
+ */
+/****************************************************************************/
+static inline int chipcHw_isPllTestEnable(void);
+
+/****************************************************************************/
+/**  @brief Get PLL2 test status
+ */
+/****************************************************************************/
+static inline int chipcHw_isPll2TestEnable(void);
+
+/****************************************************************************/
+/**  @brief PLL test select
+ */
+/****************************************************************************/
+static inline void chipcHw_pllTestSelect(uint32_t val);
+
+/****************************************************************************/
+/**  @brief PLL2 test select
+ */
+/****************************************************************************/
+static inline void chipcHw_pll2TestSelect(uint32_t val);
+
+/****************************************************************************/
+/**  @brief Get PLL test selected option
+ */
+/****************************************************************************/
+static inline uint8_t chipcHw_getPllTestSelected(void);
+
+/****************************************************************************/
+/**  @brief Get PLL2 test selected option
+ */
+/****************************************************************************/
+static inline uint8_t chipcHw_getPll2TestSelected(void);
+
+/****************************************************************************/
+/**
+*  @brief   Enables DDR SW phase alignment interrupt
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrPhaseAlignInterruptEnable(void);
+
+/****************************************************************************/
+/**
+*  @brief   Disables DDR SW phase alignment interrupt
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrPhaseAlignInterruptDisable(void);
+
+/****************************************************************************/
+/**
+*  @brief   Set VPM SW phase alignment interrupt mode
+*
+*  This function sets VPM phase alignment interrupt
+*
+*/
+/****************************************************************************/
+static inline void
+chipcHw_vpmPhaseAlignInterruptMode(chipcHw_VPM_HW_PHASE_INTR_e mode);
+
+/****************************************************************************/
+/**
+*  @brief   Enable DDR phase alignment in software
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrSwPhaseAlignEnable(void);
+
+/****************************************************************************/
+/**
+*  @brief   Disable DDR phase alignment in software
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrSwPhaseAlignDisable(void);
+
+/****************************************************************************/
+/**
+*  @brief   Enable DDR phase alignment in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignEnable(void);
+
+/****************************************************************************/
+/**
+*  @brief   Disable DDR phase alignment in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignDisable(void);
+
+/****************************************************************************/
+/**
+*  @brief   Enable VPM phase alignment in software
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmSwPhaseAlignEnable(void);
+
+/****************************************************************************/
+/**
+*  @brief   Disable VPM phase alignment in software
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmSwPhaseAlignDisable(void);
+
+/****************************************************************************/
+/**
+*  @brief   Enable VPM phase alignment in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignEnable(void);
+
+/****************************************************************************/
+/**
+*  @brief   Disable VPM phase alignment in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignDisable(void);
+
+/****************************************************************************/
+/**
+*  @brief   Set DDR phase alignment margin in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setDdrHwPhaseAlignMargin(chipcHw_DDR_HW_PHASE_MARGIN_e margin	/* Margin alinging DDR  phase */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Set VPM phase alignment margin in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setVpmHwPhaseAlignMargin(chipcHw_VPM_HW_PHASE_MARGIN_e margin	/* Margin alinging VPM  phase */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Checks DDR phase aligned status done by HW
+*
+*  @return  1: When aligned
+*           0: When not aligned
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_isDdrHwPhaseAligned(void);
+
+/****************************************************************************/
+/**
+*  @brief   Checks VPM phase aligned status done by HW
+*
+*  @return  1: When aligned
+*           0: When not aligned
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_isVpmHwPhaseAligned(void);
+
+/****************************************************************************/
+/**
+*  @brief   Get DDR phase aligned status done by HW
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getDdrHwPhaseAlignStatus(void);
+
+/****************************************************************************/
+/**
+*  @brief   Get VPM phase aligned status done by HW
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getVpmHwPhaseAlignStatus(void);
+
+/****************************************************************************/
+/**
+*  @brief   Get DDR phase control value
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getDdrPhaseControl(void);
+
+/****************************************************************************/
+/**
+*  @brief   Get VPM phase control value
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getVpmPhaseControl(void);
+
+/****************************************************************************/
+/**
+*  @brief   DDR phase alignment timeout count
+*
+*  @note    If HW fails to perform the phase alignment, it will trigger
+*           a DDR phase alignment timeout interrupt.
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignTimeout(uint32_t busCycle	/* Timeout in bus cycle */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   VPM phase alignment timeout count
+*
+*  @note    If HW fails to perform the phase alignment, it will trigger
+*           a VPM phase alignment timeout interrupt.
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignTimeout(uint32_t busCycle	/* Timeout in bus cycle */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   DDR phase alignment timeout interrupt enable
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptEnable(void);
+
+/****************************************************************************/
+/**
+*  @brief   VPM phase alignment timeout interrupt enable
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptEnable(void);
+
+/****************************************************************************/
+/**
+*  @brief   DDR phase alignment timeout interrupt disable
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptDisable(void);
+
+/****************************************************************************/
+/**
+*  @brief   VPM phase alignment timeout interrupt disable
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptDisable(void);
+
+/****************************************************************************/
+/**
+*  @brief   Clear DDR phase alignment timeout interrupt
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptClear(void);
+
+/****************************************************************************/
+/**
+*  @brief   Clear VPM phase alignment timeout interrupt
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptClear(void);
+
+/* ---- Private Constants and Types -------------------------------------- */
+
+#endif /* CHIPC_DEF_H */
-- 
cgit v1.2.3


From 4818a4727d787b2da0dc73c66f04d241626f4c97 Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Fri, 7 Aug 2009 20:06:13 +0100
Subject: ARM: 5656/1: bcmring: add csp chipc inline functions

add csp chipc inline functions

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 .../mach-bcmring/include/mach/csp/chipcHw_inline.h | 1673 ++++++++++++++++++++
 1 file changed, 1673 insertions(+)
 create mode 100644 arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h

(limited to 'arch')

diff --git a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h
new file mode 100644
index 00000000000..c78833acb37
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h
@@ -0,0 +1,1673 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+#ifndef CHIPC_INLINE_H
+#define CHIPC_INLINE_H
+
+/* ---- Include Files ----------------------------------------------------- */
+
+#include <csp/errno.h>
+#include <csp/reg.h>
+#include <mach/csp/chipcHw_reg.h>
+#include <mach/csp/chipcHw_def.h>
+
+/* ---- Private Constants and Types --------------------------------------- */
+typedef enum {
+	chipcHw_OPTYPE_BYPASS,	/* Bypass operation */
+	chipcHw_OPTYPE_OUTPUT	/* Output operation */
+} chipcHw_OPTYPE_e;
+
+/* ---- Public Constants and Types ---------------------------------------- */
+/* ---- Public Variable Externs ------------------------------------------- */
+/* ---- Public Function Prototypes ---------------------------------------- */
+/* ---- Private Function Prototypes --------------------------------------- */
+static inline void chipcHw_setClock(chipcHw_CLOCK_e clock,
+				    chipcHw_OPTYPE_e type, int mode);
+
+/****************************************************************************/
+/**
+*  @brief   Get Numeric Chip ID
+*
+*  This function returns Chip ID that includes the revison number
+*
+*  @return  Complete numeric Chip ID
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getChipId(void)
+{
+	return pChipcHw->ChipId;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Enable Spread Spectrum
+*
+*  @note chipcHw_Init() must be called earlier
+*/
+/****************************************************************************/
+static inline void chipcHw_enableSpreadSpectrum(void)
+{
+	if ((pChipcHw->
+	     PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK) !=
+	    chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER) {
+		ddrcReg_PHY_ADDR_CTL_REGP->ssCfg =
+		    (0xFFFF << ddrcReg_PHY_ADDR_SS_CFG_NDIV_AMPLITUDE_SHIFT) |
+		    (ddrcReg_PHY_ADDR_SS_CFG_MIN_CYCLE_PER_TICK <<
+		     ddrcReg_PHY_ADDR_SS_CFG_CYCLE_PER_TICK_SHIFT);
+		ddrcReg_PHY_ADDR_CTL_REGP->ssCtl |=
+		    ddrcReg_PHY_ADDR_SS_CTRL_ENABLE;
+	}
+}
+
+/****************************************************************************/
+/**
+*  @brief   Disable Spread Spectrum
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_disableSpreadSpectrum(void)
+{
+	ddrcReg_PHY_ADDR_CTL_REGP->ssCtl &= ~ddrcReg_PHY_ADDR_SS_CTRL_ENABLE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get Chip Product ID
+*
+*  This function returns Chip Product ID
+*
+*  @return  Chip Product ID
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getChipProductId(void)
+{
+	return (pChipcHw->
+		 ChipId & chipcHw_REG_CHIPID_BASE_MASK) >>
+		chipcHw_REG_CHIPID_BASE_SHIFT;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get revision number
+*
+*  This function returns revision number of the chip
+*
+*  @return  Revision number
+*/
+/****************************************************************************/
+static inline chipcHw_REV_NUMBER_e chipcHw_getChipRevisionNumber(void)
+{
+	return pChipcHw->ChipId & chipcHw_REG_CHIPID_REV_MASK;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Enables bus interface clock
+*
+*  Enables  bus interface clock of various device
+*
+*  @return  void
+*
+*  @note    use chipcHw_REG_BUS_CLOCK_XXXX for mask
+*/
+/****************************************************************************/
+static inline void chipcHw_busInterfaceClockEnable(uint32_t mask)
+{
+	reg32_modify_or(&pChipcHw->BusIntfClock, mask);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Disables bus interface clock
+*
+*  Disables  bus interface clock of various device
+*
+*  @return  void
+*
+*  @note    use chipcHw_REG_BUS_CLOCK_XXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_busInterfaceClockDisable(uint32_t mask)
+{
+	reg32_modify_and(&pChipcHw->BusIntfClock, ~mask);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get status (enabled/disabled) of bus interface clock
+*
+*  This function returns the status of devices' bus interface clock
+*
+*  @return  Bus interface clock
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getBusInterfaceClockStatus(void)
+{
+	return pChipcHw->BusIntfClock;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Enables various audio channels
+*
+*  Enables audio channel
+*
+*  @return  void
+*
+*  @note    use chipcHw_REG_AUDIO_CHANNEL_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_audioChannelEnable(uint32_t mask)
+{
+	reg32_modify_or(&pChipcHw->AudioEnable, mask);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Disables various audio channels
+*
+*  Disables audio channel
+*
+*  @return  void
+*
+*  @note    use chipcHw_REG_AUDIO_CHANNEL_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_audioChannelDisable(uint32_t mask)
+{
+	reg32_modify_and(&pChipcHw->AudioEnable, ~mask);
+}
+
+/****************************************************************************/
+/**
+*  @brief    Soft resets devices
+*
+*  Soft resets various devices
+*
+*  @return   void
+*
+*  @note     use chipcHw_REG_SOFT_RESET_XXXXXX defines
+*/
+/****************************************************************************/
+static inline void chipcHw_softReset(uint64_t mask)
+{
+	chipcHw_softResetEnable(mask);
+	chipcHw_softResetDisable(mask);
+}
+
+static inline void chipcHw_softResetDisable(uint64_t mask)
+{
+	uint32_t ctrl1 = (uint32_t) mask;
+	uint32_t ctrl2 = (uint32_t) (mask >> 32);
+
+	/* Deassert module soft reset */
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->SoftReset1 ^= ctrl1;
+	pChipcHw->SoftReset2 ^= (ctrl2 & (~chipcHw_REG_SOFT_RESET_UNHOLD_MASK));
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+static inline void chipcHw_softResetEnable(uint64_t mask)
+{
+	uint32_t ctrl1 = (uint32_t) mask;
+	uint32_t ctrl2 = (uint32_t) (mask >> 32);
+	uint32_t unhold = 0;
+
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->SoftReset1 |= ctrl1;
+	/* Mask out unhold request bits */
+	pChipcHw->SoftReset2 |= (ctrl2 & (~chipcHw_REG_SOFT_RESET_UNHOLD_MASK));
+
+	/* Process unhold requests */
+	if (ctrl2 & chipcHw_REG_SOFT_RESET_VPM_GLOBAL_UNHOLD) {
+		unhold = chipcHw_REG_SOFT_RESET_VPM_GLOBAL_HOLD;
+	}
+
+	if (ctrl2 & chipcHw_REG_SOFT_RESET_VPM_UNHOLD) {
+		unhold |= chipcHw_REG_SOFT_RESET_VPM_HOLD;
+	}
+
+	if (ctrl2 & chipcHw_REG_SOFT_RESET_ARM_UNHOLD) {
+		unhold |= chipcHw_REG_SOFT_RESET_ARM_HOLD;
+	}
+
+	if (unhold) {
+		/* Make sure unhold request is effective */
+		pChipcHw->SoftReset1 &= ~unhold;
+	}
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief    Configures misc CHIP functionality
+*
+*  Configures CHIP functionality
+*
+*  @return   void
+*
+*  @note     use chipcHw_REG_MISC_CTRL_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_miscControl(uint32_t mask)
+{
+	reg32_write(&pChipcHw->MiscCtrl, mask);
+}
+
+static inline void chipcHw_miscControlDisable(uint32_t mask)
+{
+	reg32_modify_and(&pChipcHw->MiscCtrl, ~mask);
+}
+
+static inline void chipcHw_miscControlEnable(uint32_t mask)
+{
+	reg32_modify_or(&pChipcHw->MiscCtrl, mask);
+}
+
+/****************************************************************************/
+/**
+*  @brief    Set OTP options
+*
+*  Set OTP options
+*
+*  @return   void
+*
+*  @note     use chipcHw_REG_OTP_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_setOTPOption(uint64_t mask)
+{
+	uint32_t ctrl1 = (uint32_t) mask;
+	uint32_t ctrl2 = (uint32_t) (mask >> 32);
+
+	reg32_modify_or(&pChipcHw->SoftOTP1, ctrl1);
+	reg32_modify_or(&pChipcHw->SoftOTP2, ctrl2);
+}
+
+/****************************************************************************/
+/**
+*  @brief    Get sticky bits
+*
+*  @return   Sticky bit options of type chipcHw_REG_STICKY_XXXXXX
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getStickyBits(void)
+{
+	return pChipcHw->Sticky;
+}
+
+/****************************************************************************/
+/**
+*  @brief    Set sticky bits
+*
+*  @return   void
+*
+*  @note     use chipcHw_REG_STICKY_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_setStickyBits(uint32_t mask)
+{
+	uint32_t bits = 0;
+
+	REG_LOCAL_IRQ_SAVE;
+	if (mask & chipcHw_REG_STICKY_POR_BROM) {
+		bits |= chipcHw_REG_STICKY_POR_BROM;
+	} else {
+		uint32_t sticky;
+		sticky = pChipcHw->Sticky;
+
+		if ((mask & chipcHw_REG_STICKY_BOOT_DONE)
+		    && (sticky & chipcHw_REG_STICKY_BOOT_DONE) == 0) {
+			bits |= chipcHw_REG_STICKY_BOOT_DONE;
+		}
+		if ((mask & chipcHw_REG_STICKY_GENERAL_1)
+		    && (sticky & chipcHw_REG_STICKY_GENERAL_1) == 0) {
+			bits |= chipcHw_REG_STICKY_GENERAL_1;
+		}
+		if ((mask & chipcHw_REG_STICKY_GENERAL_2)
+		    && (sticky & chipcHw_REG_STICKY_GENERAL_2) == 0) {
+			bits |= chipcHw_REG_STICKY_GENERAL_2;
+		}
+		if ((mask & chipcHw_REG_STICKY_GENERAL_3)
+		    && (sticky & chipcHw_REG_STICKY_GENERAL_3) == 0) {
+			bits |= chipcHw_REG_STICKY_GENERAL_3;
+		}
+		if ((mask & chipcHw_REG_STICKY_GENERAL_4)
+		    && (sticky & chipcHw_REG_STICKY_GENERAL_4) == 0) {
+			bits |= chipcHw_REG_STICKY_GENERAL_4;
+		}
+		if ((mask & chipcHw_REG_STICKY_GENERAL_5)
+		    && (sticky & chipcHw_REG_STICKY_GENERAL_5) == 0) {
+			bits |= chipcHw_REG_STICKY_GENERAL_5;
+		}
+	}
+	pChipcHw->Sticky = bits;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief    Clear sticky bits
+*
+*  @return   void
+*
+*  @note     use chipcHw_REG_STICKY_XXXXXX
+*/
+/****************************************************************************/
+static inline void chipcHw_clearStickyBits(uint32_t mask)
+{
+	uint32_t bits = 0;
+
+	REG_LOCAL_IRQ_SAVE;
+	if (mask &
+	    (chipcHw_REG_STICKY_BOOT_DONE | chipcHw_REG_STICKY_GENERAL_1 |
+	     chipcHw_REG_STICKY_GENERAL_2 | chipcHw_REG_STICKY_GENERAL_3 |
+	     chipcHw_REG_STICKY_GENERAL_4 | chipcHw_REG_STICKY_GENERAL_5)) {
+		uint32_t sticky = pChipcHw->Sticky;
+
+		if ((mask & chipcHw_REG_STICKY_BOOT_DONE)
+		    && (sticky & chipcHw_REG_STICKY_BOOT_DONE)) {
+			bits = chipcHw_REG_STICKY_BOOT_DONE;
+			mask &= ~chipcHw_REG_STICKY_BOOT_DONE;
+		}
+		if ((mask & chipcHw_REG_STICKY_GENERAL_1)
+		    && (sticky & chipcHw_REG_STICKY_GENERAL_1)) {
+			bits |= chipcHw_REG_STICKY_GENERAL_1;
+			mask &= ~chipcHw_REG_STICKY_GENERAL_1;
+		}
+		if ((mask & chipcHw_REG_STICKY_GENERAL_2)
+		    && (sticky & chipcHw_REG_STICKY_GENERAL_2)) {
+			bits |= chipcHw_REG_STICKY_GENERAL_2;
+			mask &= ~chipcHw_REG_STICKY_GENERAL_2;
+		}
+		if ((mask & chipcHw_REG_STICKY_GENERAL_3)
+		    && (sticky & chipcHw_REG_STICKY_GENERAL_3)) {
+			bits |= chipcHw_REG_STICKY_GENERAL_3;
+			mask &= ~chipcHw_REG_STICKY_GENERAL_3;
+		}
+		if ((mask & chipcHw_REG_STICKY_GENERAL_4)
+		    && (sticky & chipcHw_REG_STICKY_GENERAL_4)) {
+			bits |= chipcHw_REG_STICKY_GENERAL_4;
+			mask &= ~chipcHw_REG_STICKY_GENERAL_4;
+		}
+		if ((mask & chipcHw_REG_STICKY_GENERAL_5)
+		    && (sticky & chipcHw_REG_STICKY_GENERAL_5)) {
+			bits |= chipcHw_REG_STICKY_GENERAL_5;
+			mask &= ~chipcHw_REG_STICKY_GENERAL_5;
+		}
+	}
+	pChipcHw->Sticky = bits | mask;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief    Get software strap value
+*
+*  Retrieves software strap value
+*
+*  @return   Software strap value
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getSoftStraps(void)
+{
+	return pChipcHw->SoftStraps;
+}
+
+/****************************************************************************/
+/**
+*  @brief    Set software override strap options
+*
+*  set software override strap options
+*
+*  @return   nothing
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setSoftStraps(uint32_t strapOptions)
+{
+	reg32_write(&pChipcHw->SoftStraps, strapOptions);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get Pin Strap Options
+*
+*  This function returns the raw boot strap options
+*
+*  @return  strap options
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getPinStraps(void)
+{
+	return pChipcHw->PinStraps;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get Valid Strap Options
+*
+*  This function returns the valid raw boot strap options
+*
+*  @return  strap options
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getValidStraps(void)
+{
+	uint32_t softStraps;
+
+	/*
+	 ** Always return the SoftStraps - bootROM calls chipcHw_initValidStraps
+	 ** which copies HW straps to soft straps if there is no override
+	 */
+	softStraps = chipcHw_getSoftStraps();
+
+	return softStraps;
+}
+
+/****************************************************************************/
+/**
+*  @brief    Initialize valid pin strap options
+*
+*  Retrieves valid pin strap options by copying HW strap options to soft register
+*  (if chipcHw_STRAPS_SOFT_OVERRIDE not set)
+*
+*  @return   nothing
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_initValidStraps(void)
+{
+	uint32_t softStraps;
+
+	REG_LOCAL_IRQ_SAVE;
+	softStraps = chipcHw_getSoftStraps();
+
+	if ((softStraps & chipcHw_STRAPS_SOFT_OVERRIDE) == 0) {
+		/* Copy HW straps to software straps */
+		chipcHw_setSoftStraps(chipcHw_getPinStraps());
+	}
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get boot device
+*
+*  This function returns the device type used in booting the system
+*
+*  @return  Boot device of type chipcHw_BOOT_DEVICE
+*
+*/
+/****************************************************************************/
+static inline chipcHw_BOOT_DEVICE_e chipcHw_getBootDevice(void)
+{
+	return chipcHw_getValidStraps() & chipcHw_STRAPS_BOOT_DEVICE_MASK;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get boot mode
+*
+*  This function returns the way the system was booted
+*
+*  @return  Boot mode of type chipcHw_BOOT_MODE
+*
+*/
+/****************************************************************************/
+static inline chipcHw_BOOT_MODE_e chipcHw_getBootMode(void)
+{
+	return chipcHw_getValidStraps() & chipcHw_STRAPS_BOOT_MODE_MASK;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get NAND flash page size
+*
+*  This function returns the NAND device page size
+*
+*  @return  Boot NAND device page size
+*
+*/
+/****************************************************************************/
+static inline chipcHw_NAND_PAGESIZE_e chipcHw_getNandPageSize(void)
+{
+	return chipcHw_getValidStraps() & chipcHw_STRAPS_NAND_PAGESIZE_MASK;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get NAND flash address cycle configuration
+*
+*  This function returns the NAND flash address cycle configuration
+*
+*  @return  0 = Do not extra address cycle, 1 = Add extra cycle
+*
+*/
+/****************************************************************************/
+static inline int chipcHw_getNandExtraCycle(void)
+{
+	if (chipcHw_getValidStraps() & chipcHw_STRAPS_NAND_EXTRA_CYCLE) {
+		return 1;
+	} else {
+		return 0;
+	}
+}
+
+/****************************************************************************/
+/**
+*  @brief   Activates PIF interface
+*
+*  This function activates PIF interface by taking control of LCD pins
+*
+*  @note
+*       When activated, LCD pins will be defined as follows for PIF operation
+*
+*       CLD[17:0]  = pif_data[17:0]
+*       CLD[23:18] = pif_address[5:0]
+*       CLPOWER    = pif_wr_str
+*       CLCP       = pif_rd_str
+*       CLAC       = pif_hat1
+*       CLFP       = pif_hrdy1
+*       CLLP       = pif_hat2
+*       GPIO[42]   = pif_hrdy2
+*
+*       In PIF mode, "pif_hrdy2" overrides other shared function for GPIO[42] pin
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_activatePifInterface(void)
+{
+	reg32_write(&pChipcHw->LcdPifMode, chipcHw_REG_PIF_PIN_ENABLE);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Activates LCD interface
+*
+*  This function activates LCD interface
+*
+*  @note
+*       When activated, LCD pins will be defined as follows
+*
+*       CLD[17:0]  = LCD data
+*       CLD[23:18] = LCD data
+*       CLPOWER    = LCD power
+*       CLCP       =
+*       CLAC       = LCD ack
+*       CLFP       =
+*       CLLP       =
+*/
+/****************************************************************************/
+static inline void chipcHw_activateLcdInterface(void)
+{
+	reg32_write(&pChipcHw->LcdPifMode, chipcHw_REG_LCD_PIN_ENABLE);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Deactivates PIF/LCD interface
+*
+*  This function deactivates PIF/LCD interface
+*
+*  @note
+*       When deactivated LCD pins will be in rti-stated
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_deactivatePifLcdInterface(void)
+{
+	reg32_write(&pChipcHw->LcdPifMode, 0);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Select GE2
+*
+*  This function select GE2 as the graphic engine
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_selectGE2(void)
+{
+	reg32_modify_and(&pChipcHw->MiscCtrl, ~chipcHw_REG_MISC_CTRL_GE_SEL);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Select GE3
+*
+*  This function select GE3 as the graphic engine
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_selectGE3(void)
+{
+	reg32_modify_or(&pChipcHw->MiscCtrl, chipcHw_REG_MISC_CTRL_GE_SEL);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get to know the configuration of GPIO pin
+*
+*/
+/****************************************************************************/
+static inline chipcHw_GPIO_FUNCTION_e chipcHw_getGpioPinFunction(int pin)
+{
+	return (*((uint32_t *) chipcHw_REG_GPIO_MUX(pin)) &
+		(chipcHw_REG_GPIO_MUX_MASK <<
+		 chipcHw_REG_GPIO_MUX_POSITION(pin))) >>
+	    chipcHw_REG_GPIO_MUX_POSITION(pin);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Configure GPIO pin function
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setGpioPinFunction(int pin,
+					      chipcHw_GPIO_FUNCTION_e func)
+{
+	REG_LOCAL_IRQ_SAVE;
+	*((uint32_t *) chipcHw_REG_GPIO_MUX(pin)) &=
+	    ~(chipcHw_REG_GPIO_MUX_MASK << chipcHw_REG_GPIO_MUX_POSITION(pin));
+	*((uint32_t *) chipcHw_REG_GPIO_MUX(pin)) |=
+	    func << chipcHw_REG_GPIO_MUX_POSITION(pin);
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Set Pin slew rate
+*
+*  This function sets the slew of individual pin
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setPinSlewRate(uint32_t pin,
+					  chipcHw_PIN_SLEW_RATE_e slewRate)
+{
+	REG_LOCAL_IRQ_SAVE;
+	*((uint32_t *) chipcHw_REG_SLEW_RATE(pin)) &=
+	    ~(chipcHw_REG_SLEW_RATE_MASK <<
+	      chipcHw_REG_SLEW_RATE_POSITION(pin));
+	*((uint32_t *) chipcHw_REG_SLEW_RATE(pin)) |=
+	    (uint32_t) slewRate << chipcHw_REG_SLEW_RATE_POSITION(pin);
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Set Pin output drive current
+*
+*  This function sets output drive current of individual pin
+*
+*  Note: Avoid the use of the word 'current' since linux headers define this
+*        to be the current task.
+*/
+/****************************************************************************/
+static inline void chipcHw_setPinOutputCurrent(uint32_t pin,
+					       chipcHw_PIN_CURRENT_STRENGTH_e
+					       curr)
+{
+	REG_LOCAL_IRQ_SAVE;
+	*((uint32_t *) chipcHw_REG_CURRENT(pin)) &=
+	    ~(chipcHw_REG_CURRENT_MASK << chipcHw_REG_CURRENT_POSITION(pin));
+	*((uint32_t *) chipcHw_REG_CURRENT(pin)) |=
+	    (uint32_t) curr << chipcHw_REG_CURRENT_POSITION(pin);
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Set Pin pullup register
+*
+*  This function sets pullup register of individual pin
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setPinPullup(uint32_t pin, chipcHw_PIN_PULL_e pullup)
+{
+	REG_LOCAL_IRQ_SAVE;
+	*((uint32_t *) chipcHw_REG_PULLUP(pin)) &=
+	    ~(chipcHw_REG_PULLUP_MASK << chipcHw_REG_PULLUP_POSITION(pin));
+	*((uint32_t *) chipcHw_REG_PULLUP(pin)) |=
+	    (uint32_t) pullup << chipcHw_REG_PULLUP_POSITION(pin);
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Set Pin input type
+*
+*  This function sets input type of individual pin
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setPinInputType(uint32_t pin,
+					   chipcHw_PIN_INPUTTYPE_e inputType)
+{
+	REG_LOCAL_IRQ_SAVE;
+	*((uint32_t *) chipcHw_REG_INPUTTYPE(pin)) &=
+	    ~(chipcHw_REG_INPUTTYPE_MASK <<
+	      chipcHw_REG_INPUTTYPE_POSITION(pin));
+	*((uint32_t *) chipcHw_REG_INPUTTYPE(pin)) |=
+	    (uint32_t) inputType << chipcHw_REG_INPUTTYPE_POSITION(pin);
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Power up the USB PHY
+*
+*  This function powers up the USB PHY
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_powerUpUsbPhy(void)
+{
+	reg32_modify_and(&pChipcHw->MiscCtrl,
+			 chipcHw_REG_MISC_CTRL_USB_POWERON);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Power down the USB PHY
+*
+*  This function powers down the USB PHY
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_powerDownUsbPhy(void)
+{
+	reg32_modify_or(&pChipcHw->MiscCtrl,
+			chipcHw_REG_MISC_CTRL_USB_POWEROFF);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Set the 2nd USB as host
+*
+*  This function sets the 2nd USB as host
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setUsbHost(void)
+{
+	reg32_modify_or(&pChipcHw->MiscCtrl,
+			chipcHw_REG_MISC_CTRL_USB_MODE_HOST);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Set the 2nd USB as device
+*
+*  This function sets the 2nd USB as device
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setUsbDevice(void)
+{
+	reg32_modify_and(&pChipcHw->MiscCtrl,
+			 chipcHw_REG_MISC_CTRL_USB_MODE_DEVICE);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Lower layer funtion to enable/disable a clock of a certain device
+*
+*  This function enables/disables a core clock
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_setClock(chipcHw_CLOCK_e clock,
+				    chipcHw_OPTYPE_e type, int mode)
+{
+	volatile uint32_t *pPLLReg = (uint32_t *) 0x0;
+	volatile uint32_t *pClockCtrl = (uint32_t *) 0x0;
+
+	switch (clock) {
+	case chipcHw_CLOCK_DDR:
+		pPLLReg = &pChipcHw->DDRClock;
+		break;
+	case chipcHw_CLOCK_ARM:
+		pPLLReg = &pChipcHw->ARMClock;
+		break;
+	case chipcHw_CLOCK_ESW:
+		pPLLReg = &pChipcHw->ESWClock;
+		break;
+	case chipcHw_CLOCK_VPM:
+		pPLLReg = &pChipcHw->VPMClock;
+		break;
+	case chipcHw_CLOCK_ESW125:
+		pPLLReg = &pChipcHw->ESW125Clock;
+		break;
+	case chipcHw_CLOCK_UART:
+		pPLLReg = &pChipcHw->UARTClock;
+		break;
+	case chipcHw_CLOCK_SDIO0:
+		pPLLReg = &pChipcHw->SDIO0Clock;
+		break;
+	case chipcHw_CLOCK_SDIO1:
+		pPLLReg = &pChipcHw->SDIO1Clock;
+		break;
+	case chipcHw_CLOCK_SPI:
+		pPLLReg = &pChipcHw->SPIClock;
+		break;
+	case chipcHw_CLOCK_ETM:
+		pPLLReg = &pChipcHw->ETMClock;
+		break;
+	case chipcHw_CLOCK_USB:
+		pPLLReg = &pChipcHw->USBClock;
+		if (type == chipcHw_OPTYPE_OUTPUT) {
+			if (mode) {
+				reg32_modify_and(pPLLReg,
+						 ~chipcHw_REG_PLL_CLOCK_POWER_DOWN);
+			} else {
+				reg32_modify_or(pPLLReg,
+						chipcHw_REG_PLL_CLOCK_POWER_DOWN);
+			}
+		}
+		break;
+	case chipcHw_CLOCK_LCD:
+		pPLLReg = &pChipcHw->LCDClock;
+		if (type == chipcHw_OPTYPE_OUTPUT) {
+			if (mode) {
+				reg32_modify_and(pPLLReg,
+						 ~chipcHw_REG_PLL_CLOCK_POWER_DOWN);
+			} else {
+				reg32_modify_or(pPLLReg,
+						chipcHw_REG_PLL_CLOCK_POWER_DOWN);
+			}
+		}
+		break;
+	case chipcHw_CLOCK_APM:
+		pPLLReg = &pChipcHw->APMClock;
+		if (type == chipcHw_OPTYPE_OUTPUT) {
+			if (mode) {
+				reg32_modify_and(pPLLReg,
+						 ~chipcHw_REG_PLL_CLOCK_POWER_DOWN);
+			} else {
+				reg32_modify_or(pPLLReg,
+						chipcHw_REG_PLL_CLOCK_POWER_DOWN);
+			}
+		}
+		break;
+	case chipcHw_CLOCK_BUS:
+		pClockCtrl = &pChipcHw->ACLKClock;
+		break;
+	case chipcHw_CLOCK_OTP:
+		pClockCtrl = &pChipcHw->OTPClock;
+		break;
+	case chipcHw_CLOCK_I2C:
+		pClockCtrl = &pChipcHw->I2CClock;
+		break;
+	case chipcHw_CLOCK_I2S0:
+		pClockCtrl = &pChipcHw->I2S0Clock;
+		break;
+	case chipcHw_CLOCK_RTBUS:
+		pClockCtrl = &pChipcHw->RTBUSClock;
+		break;
+	case chipcHw_CLOCK_APM100:
+		pClockCtrl = &pChipcHw->APM100Clock;
+		break;
+	case chipcHw_CLOCK_TSC:
+		pClockCtrl = &pChipcHw->TSCClock;
+		break;
+	case chipcHw_CLOCK_LED:
+		pClockCtrl = &pChipcHw->LEDClock;
+		break;
+	case chipcHw_CLOCK_I2S1:
+		pClockCtrl = &pChipcHw->I2S1Clock;
+		break;
+	}
+
+	if (pPLLReg) {
+		switch (type) {
+		case chipcHw_OPTYPE_OUTPUT:
+			/* PLL clock output enable/disable */
+			if (mode) {
+				if (clock == chipcHw_CLOCK_DDR) {
+					/* DDR clock enable is inverted */
+					reg32_modify_and(pPLLReg,
+							 ~chipcHw_REG_PLL_CLOCK_OUTPUT_ENABLE);
+				} else {
+					reg32_modify_or(pPLLReg,
+							chipcHw_REG_PLL_CLOCK_OUTPUT_ENABLE);
+				}
+			} else {
+				if (clock == chipcHw_CLOCK_DDR) {
+					/* DDR clock disable is inverted */
+					reg32_modify_or(pPLLReg,
+							chipcHw_REG_PLL_CLOCK_OUTPUT_ENABLE);
+				} else {
+					reg32_modify_and(pPLLReg,
+							 ~chipcHw_REG_PLL_CLOCK_OUTPUT_ENABLE);
+				}
+			}
+			break;
+		case chipcHw_OPTYPE_BYPASS:
+			/* PLL clock bypass enable/disable */
+			if (mode) {
+				reg32_modify_or(pPLLReg,
+						chipcHw_REG_PLL_CLOCK_BYPASS_SELECT);
+			} else {
+				reg32_modify_and(pPLLReg,
+						 ~chipcHw_REG_PLL_CLOCK_BYPASS_SELECT);
+			}
+			break;
+		}
+	} else if (pClockCtrl) {
+		switch (type) {
+		case chipcHw_OPTYPE_OUTPUT:
+			if (mode) {
+				reg32_modify_or(pClockCtrl,
+						chipcHw_REG_DIV_CLOCK_OUTPUT_ENABLE);
+			} else {
+				reg32_modify_and(pClockCtrl,
+						 ~chipcHw_REG_DIV_CLOCK_OUTPUT_ENABLE);
+			}
+			break;
+		case chipcHw_OPTYPE_BYPASS:
+			if (mode) {
+				reg32_modify_or(pClockCtrl,
+						chipcHw_REG_DIV_CLOCK_BYPASS_SELECT);
+			} else {
+				reg32_modify_and(pClockCtrl,
+						 ~chipcHw_REG_DIV_CLOCK_BYPASS_SELECT);
+			}
+			break;
+		}
+	}
+}
+
+/****************************************************************************/
+/**
+*  @brief   Disables a core clock of a certain device
+*
+*  This function disables a core clock
+*
+*  @note    no change in power consumption
+*/
+/****************************************************************************/
+static inline void chipcHw_setClockDisable(chipcHw_CLOCK_e clock)
+{
+
+	/* Disable output of the clock */
+	chipcHw_setClock(clock, chipcHw_OPTYPE_OUTPUT, 0);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Enable a core clock of a certain device
+*
+*  This function enables a core clock
+*
+*  @note    no change in power consumption
+*/
+/****************************************************************************/
+static inline void chipcHw_setClockEnable(chipcHw_CLOCK_e clock)
+{
+
+	/* Enable output of the clock */
+	chipcHw_setClock(clock, chipcHw_OPTYPE_OUTPUT, 1);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Enables bypass clock of a certain device
+*
+*  This function enables bypass clock
+*
+*  @note    Doesnot affect the bus interface clock
+*/
+/****************************************************************************/
+static inline void chipcHw_bypassClockEnable(chipcHw_CLOCK_e clock)
+{
+	/* Enable bypass clock */
+	chipcHw_setClock(clock, chipcHw_OPTYPE_BYPASS, 1);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Disabled bypass clock of a certain device
+*
+*  This function disables bypass clock
+*
+*  @note    Doesnot affect the bus interface clock
+*/
+/****************************************************************************/
+static inline void chipcHw_bypassClockDisable(chipcHw_CLOCK_e clock)
+{
+	/* Disable bypass clock */
+	chipcHw_setClock(clock, chipcHw_OPTYPE_BYPASS, 0);
+
+}
+
+/****************************************************************************/
+/**  @brief Checks if software strap is enabled
+ *
+ *   @return 1 : When enable
+ *           0 : When disable
+ */
+/****************************************************************************/
+static inline int chipcHw_isSoftwareStrapsEnable(void)
+{
+	return pChipcHw->SoftStraps & 0x00000001;
+}
+
+/****************************************************************************/
+/**  @brief Enable software strap
+ */
+/****************************************************************************/
+static inline void chipcHw_softwareStrapsEnable(void)
+{
+	reg32_modify_or(&pChipcHw->SoftStraps, 0x00000001);
+}
+
+/****************************************************************************/
+/**  @brief Disable software strap
+ */
+/****************************************************************************/
+static inline void chipcHw_softwareStrapsDisable(void)
+{
+	reg32_modify_and(&pChipcHw->SoftStraps, (~0x00000001));
+}
+
+/****************************************************************************/
+/**  @brief PLL test enable
+ */
+/****************************************************************************/
+static inline void chipcHw_pllTestEnable(void)
+{
+	reg32_modify_or(&pChipcHw->PLLConfig,
+			chipcHw_REG_PLL_CONFIG_TEST_ENABLE);
+}
+
+/****************************************************************************/
+/**  @brief PLL2 test enable
+ */
+/****************************************************************************/
+static inline void chipcHw_pll2TestEnable(void)
+{
+	reg32_modify_or(&pChipcHw->PLLConfig2,
+			chipcHw_REG_PLL_CONFIG_TEST_ENABLE);
+}
+
+/****************************************************************************/
+/**  @brief PLL test disable
+ */
+/****************************************************************************/
+static inline void chipcHw_pllTestDisable(void)
+{
+	reg32_modify_and(&pChipcHw->PLLConfig,
+			 ~chipcHw_REG_PLL_CONFIG_TEST_ENABLE);
+}
+
+/****************************************************************************/
+/**  @brief PLL2 test disable
+ */
+/****************************************************************************/
+static inline void chipcHw_pll2TestDisable(void)
+{
+	reg32_modify_and(&pChipcHw->PLLConfig2,
+			 ~chipcHw_REG_PLL_CONFIG_TEST_ENABLE);
+}
+
+/****************************************************************************/
+/**  @brief Get PLL test status
+ */
+/****************************************************************************/
+static inline int chipcHw_isPllTestEnable(void)
+{
+	return pChipcHw->PLLConfig & chipcHw_REG_PLL_CONFIG_TEST_ENABLE;
+}
+
+/****************************************************************************/
+/**  @brief Get PLL2 test status
+ */
+/****************************************************************************/
+static inline int chipcHw_isPll2TestEnable(void)
+{
+	return pChipcHw->PLLConfig2 & chipcHw_REG_PLL_CONFIG_TEST_ENABLE;
+}
+
+/****************************************************************************/
+/**  @brief PLL test select
+ */
+/****************************************************************************/
+static inline void chipcHw_pllTestSelect(uint32_t val)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->PLLConfig &= ~chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK;
+	pChipcHw->PLLConfig |=
+	    (val) << chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**  @brief PLL2 test select
+ */
+/****************************************************************************/
+static inline void chipcHw_pll2TestSelect(uint32_t val)
+{
+
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->PLLConfig2 &= ~chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK;
+	pChipcHw->PLLConfig2 |=
+	    (val) << chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**  @brief Get PLL test selected option
+ */
+/****************************************************************************/
+static inline uint8_t chipcHw_getPllTestSelected(void)
+{
+	return (uint8_t) ((pChipcHw->
+			   PLLConfig & chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK)
+			  >> chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT);
+}
+
+/****************************************************************************/
+/**  @brief Get PLL2 test selected option
+ */
+/****************************************************************************/
+static inline uint8_t chipcHw_getPll2TestSelected(void)
+{
+	return (uint8_t) ((pChipcHw->
+			   PLLConfig2 & chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK)
+			  >> chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT);
+}
+
+/****************************************************************************/
+/**
+*  @brief  Disable the PLL1
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_pll1Disable(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->PLLConfig |= chipcHw_REG_PLL_CONFIG_POWER_DOWN;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief  Disable the PLL2
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_pll2Disable(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->PLLConfig2 |= chipcHw_REG_PLL_CONFIG_POWER_DOWN;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Enables DDR SW phase alignment interrupt
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrPhaseAlignInterruptEnable(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->Spare1 |= chipcHw_REG_SPARE1_DDR_PHASE_INTR_ENABLE;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Disables DDR SW phase alignment interrupt
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrPhaseAlignInterruptDisable(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->Spare1 &= ~chipcHw_REG_SPARE1_DDR_PHASE_INTR_ENABLE;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Set VPM SW phase alignment interrupt mode
+*
+*  This function sets VPM phase alignment interrupt
+*/
+/****************************************************************************/
+static inline void
+chipcHw_vpmPhaseAlignInterruptMode(chipcHw_VPM_HW_PHASE_INTR_e mode)
+{
+	REG_LOCAL_IRQ_SAVE;
+	if (mode == chipcHw_VPM_HW_PHASE_INTR_DISABLE) {
+		pChipcHw->Spare1 &= ~chipcHw_REG_SPARE1_VPM_PHASE_INTR_ENABLE;
+	} else {
+		pChipcHw->Spare1 |= chipcHw_REG_SPARE1_VPM_PHASE_INTR_ENABLE;
+	}
+	pChipcHw->VPMPhaseCtrl2 =
+	    (pChipcHw->
+	     VPMPhaseCtrl2 & ~(chipcHw_REG_VPM_INTR_SELECT_MASK <<
+			       chipcHw_REG_VPM_INTR_SELECT_SHIFT)) | mode;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Enable DDR phase alignment in software
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrSwPhaseAlignEnable(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->DDRPhaseCtrl1 |= chipcHw_REG_DDR_SW_PHASE_CTRL_ENABLE;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Disable DDR phase alignment in software
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrSwPhaseAlignDisable(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->DDRPhaseCtrl1 &= ~chipcHw_REG_DDR_SW_PHASE_CTRL_ENABLE;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Enable DDR phase alignment in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignEnable(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->DDRPhaseCtrl1 |= chipcHw_REG_DDR_HW_PHASE_CTRL_ENABLE;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Disable DDR phase alignment in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignDisable(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->DDRPhaseCtrl1 &= ~chipcHw_REG_DDR_HW_PHASE_CTRL_ENABLE;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Enable VPM phase alignment in software
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmSwPhaseAlignEnable(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->VPMPhaseCtrl1 |= chipcHw_REG_VPM_SW_PHASE_CTRL_ENABLE;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Disable VPM phase alignment in software
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmSwPhaseAlignDisable(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->VPMPhaseCtrl1 &= ~chipcHw_REG_VPM_SW_PHASE_CTRL_ENABLE;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Enable VPM phase alignment in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignEnable(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->VPMPhaseCtrl1 |= chipcHw_REG_VPM_HW_PHASE_CTRL_ENABLE;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Disable VPM phase alignment in hardware
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignDisable(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->VPMPhaseCtrl1 &= ~chipcHw_REG_VPM_HW_PHASE_CTRL_ENABLE;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Set DDR phase alignment margin in hardware
+*
+*/
+/****************************************************************************/
+static inline void
+chipcHw_setDdrHwPhaseAlignMargin(chipcHw_DDR_HW_PHASE_MARGIN_e margin)
+{
+	uint32_t ge = 0;
+	uint32_t le = 0;
+
+	switch (margin) {
+	case chipcHw_DDR_HW_PHASE_MARGIN_STRICT:
+		ge = 0x0F;
+		le = 0x0F;
+		break;
+	case chipcHw_DDR_HW_PHASE_MARGIN_MEDIUM:
+		ge = 0x03;
+		le = 0x3F;
+		break;
+	case chipcHw_DDR_HW_PHASE_MARGIN_WIDE:
+		ge = 0x01;
+		le = 0x7F;
+		break;
+	}
+
+	{
+		REG_LOCAL_IRQ_SAVE;
+
+		pChipcHw->DDRPhaseCtrl1 &=
+		    ~((chipcHw_REG_DDR_PHASE_VALUE_GE_MASK <<
+		       chipcHw_REG_DDR_PHASE_VALUE_GE_SHIFT)
+		      || (chipcHw_REG_DDR_PHASE_VALUE_LE_MASK <<
+			  chipcHw_REG_DDR_PHASE_VALUE_LE_SHIFT));
+
+		pChipcHw->DDRPhaseCtrl1 |=
+		    ((ge << chipcHw_REG_DDR_PHASE_VALUE_GE_SHIFT)
+		     || (le << chipcHw_REG_DDR_PHASE_VALUE_LE_SHIFT));
+
+		REG_LOCAL_IRQ_RESTORE;
+	}
+}
+
+/****************************************************************************/
+/**
+*  @brief   Set VPM phase alignment margin in hardware
+*
+*/
+/****************************************************************************/
+static inline void
+chipcHw_setVpmHwPhaseAlignMargin(chipcHw_VPM_HW_PHASE_MARGIN_e margin)
+{
+	uint32_t ge = 0;
+	uint32_t le = 0;
+
+	switch (margin) {
+	case chipcHw_VPM_HW_PHASE_MARGIN_STRICT:
+		ge = 0x0F;
+		le = 0x0F;
+		break;
+	case chipcHw_VPM_HW_PHASE_MARGIN_MEDIUM:
+		ge = 0x03;
+		le = 0x3F;
+		break;
+	case chipcHw_VPM_HW_PHASE_MARGIN_WIDE:
+		ge = 0x01;
+		le = 0x7F;
+		break;
+	}
+
+	{
+		REG_LOCAL_IRQ_SAVE;
+
+		pChipcHw->VPMPhaseCtrl1 &=
+		    ~((chipcHw_REG_VPM_PHASE_VALUE_GE_MASK <<
+		       chipcHw_REG_VPM_PHASE_VALUE_GE_SHIFT)
+		      || (chipcHw_REG_VPM_PHASE_VALUE_LE_MASK <<
+			  chipcHw_REG_VPM_PHASE_VALUE_LE_SHIFT));
+
+		pChipcHw->VPMPhaseCtrl1 |=
+		    ((ge << chipcHw_REG_VPM_PHASE_VALUE_GE_SHIFT)
+		     || (le << chipcHw_REG_VPM_PHASE_VALUE_LE_SHIFT));
+
+		REG_LOCAL_IRQ_RESTORE;
+	}
+}
+
+/****************************************************************************/
+/**
+*  @brief   Checks DDR phase aligned status done by HW
+*
+*  @return  1: When aligned
+*           0: When not aligned
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_isDdrHwPhaseAligned(void)
+{
+	return (pChipcHw->
+		PhaseAlignStatus & chipcHw_REG_DDR_PHASE_ALIGNED) ? 1 : 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Checks VPM phase aligned status done by HW
+*
+*  @return  1: When aligned
+*           0: When not aligned
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_isVpmHwPhaseAligned(void)
+{
+	return (pChipcHw->
+		PhaseAlignStatus & chipcHw_REG_VPM_PHASE_ALIGNED) ? 1 : 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get DDR phase aligned status done by HW
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getDdrHwPhaseAlignStatus(void)
+{
+	return (pChipcHw->
+		PhaseAlignStatus & chipcHw_REG_DDR_PHASE_STATUS_MASK) >>
+	    chipcHw_REG_DDR_PHASE_STATUS_SHIFT;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get VPM phase aligned status done by HW
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getVpmHwPhaseAlignStatus(void)
+{
+	return (pChipcHw->
+		PhaseAlignStatus & chipcHw_REG_VPM_PHASE_STATUS_MASK) >>
+	    chipcHw_REG_VPM_PHASE_STATUS_SHIFT;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get DDR phase control value
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getDdrPhaseControl(void)
+{
+	return (pChipcHw->
+		PhaseAlignStatus & chipcHw_REG_DDR_PHASE_CTRL_MASK) >>
+	    chipcHw_REG_DDR_PHASE_CTRL_SHIFT;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get VPM phase control value
+*
+*/
+/****************************************************************************/
+static inline uint32_t chipcHw_getVpmPhaseControl(void)
+{
+	return (pChipcHw->
+		PhaseAlignStatus & chipcHw_REG_VPM_PHASE_CTRL_MASK) >>
+	    chipcHw_REG_VPM_PHASE_CTRL_SHIFT;
+}
+
+/****************************************************************************/
+/**
+*  @brief   DDR phase alignment timeout count
+*
+*  @note    If HW fails to perform the phase alignment, it will trigger
+*           a DDR phase alignment timeout interrupt.
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignTimeout(uint32_t busCycle)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->DDRPhaseCtrl2 &=
+	    ~(chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_MASK <<
+	      chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_SHIFT);
+	pChipcHw->DDRPhaseCtrl2 |=
+	    (busCycle & chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_MASK) <<
+	    chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_SHIFT;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   VPM phase alignment timeout count
+*
+*  @note    If HW fails to perform the phase alignment, it will trigger
+*           a VPM phase alignment timeout interrupt.
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignTimeout(uint32_t busCycle)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->VPMPhaseCtrl2 &=
+	    ~(chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_MASK <<
+	      chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_SHIFT);
+	pChipcHw->VPMPhaseCtrl2 |=
+	    (busCycle & chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_MASK) <<
+	    chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_SHIFT;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Clear DDR phase alignment timeout interrupt
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptClear(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	/* Clear timeout interrupt service bit */
+	pChipcHw->DDRPhaseCtrl2 |= chipcHw_REG_DDR_INTR_SERVICED;
+	pChipcHw->DDRPhaseCtrl2 &= ~chipcHw_REG_DDR_INTR_SERVICED;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Clear VPM phase alignment timeout interrupt
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptClear(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	/* Clear timeout interrupt service bit */
+	pChipcHw->VPMPhaseCtrl2 |= chipcHw_REG_VPM_INTR_SERVICED;
+	pChipcHw->VPMPhaseCtrl2 &= ~chipcHw_REG_VPM_INTR_SERVICED;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   DDR phase alignment timeout interrupt enable
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptEnable(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	chipcHw_ddrHwPhaseAlignTimeoutInterruptClear();	/* Recommended */
+	/* Enable timeout interrupt */
+	pChipcHw->DDRPhaseCtrl2 |= chipcHw_REG_DDR_TIMEOUT_INTR_ENABLE;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   VPM phase alignment timeout interrupt enable
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptEnable(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	chipcHw_vpmHwPhaseAlignTimeoutInterruptClear();	/* Recommended */
+	/* Enable timeout interrupt */
+	pChipcHw->VPMPhaseCtrl2 |= chipcHw_REG_VPM_TIMEOUT_INTR_ENABLE;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   DDR phase alignment timeout interrupt disable
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptDisable(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->DDRPhaseCtrl2 &= ~chipcHw_REG_DDR_TIMEOUT_INTR_ENABLE;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   VPM phase alignment timeout interrupt disable
+*
+*/
+/****************************************************************************/
+static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptDisable(void)
+{
+	REG_LOCAL_IRQ_SAVE;
+	pChipcHw->VPMPhaseCtrl2 &= ~chipcHw_REG_VPM_TIMEOUT_INTR_ENABLE;
+	REG_LOCAL_IRQ_RESTORE;
+}
+
+#endif /* CHIPC_INLINE_H */
-- 
cgit v1.2.3


From 638ee2db1916de4da144f0ed6d156181ede20a41 Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Fri, 7 Aug 2009 20:06:47 +0100
Subject: ARM: 5657/1: bcmring: add csp chipc block source code

add csp chipc block source code

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-bcmring/csp/chipc/Makefile        |   1 +
 arch/arm/mach-bcmring/csp/chipc/chipcHw.c       | 776 ++++++++++++++++++++++++
 arch/arm/mach-bcmring/csp/chipc/chipcHw_init.c  | 293 +++++++++
 arch/arm/mach-bcmring/csp/chipc/chipcHw_reset.c | 124 ++++
 arch/arm/mach-bcmring/csp/chipc/chipcHw_str.c   |  64 ++
 5 files changed, 1258 insertions(+)
 create mode 100644 arch/arm/mach-bcmring/csp/chipc/Makefile
 create mode 100644 arch/arm/mach-bcmring/csp/chipc/chipcHw.c
 create mode 100644 arch/arm/mach-bcmring/csp/chipc/chipcHw_init.c
 create mode 100644 arch/arm/mach-bcmring/csp/chipc/chipcHw_reset.c
 create mode 100644 arch/arm/mach-bcmring/csp/chipc/chipcHw_str.c

(limited to 'arch')

diff --git a/arch/arm/mach-bcmring/csp/chipc/Makefile b/arch/arm/mach-bcmring/csp/chipc/Makefile
new file mode 100644
index 00000000000..673952768ee
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/chipc/Makefile
@@ -0,0 +1 @@
+obj-y += chipcHw.o chipcHw_str.o chipcHw_reset.o chipcHw_init.o
diff --git a/arch/arm/mach-bcmring/csp/chipc/chipcHw.c b/arch/arm/mach-bcmring/csp/chipc/chipcHw.c
new file mode 100644
index 00000000000..b3a61d860c6
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/chipc/chipcHw.c
@@ -0,0 +1,776 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    chipcHw.c
+*
+*  @brief   Low level Various CHIP clock controlling routines
+*
+*  @note
+*
+*   These routines provide basic clock controlling functionality only.
+*/
+/****************************************************************************/
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <csp/errno.h>
+#include <csp/stdint.h>
+#include <csp/module.h>
+
+#include <mach/csp/chipcHw_def.h>
+#include <mach/csp/chipcHw_inline.h>
+
+#include <csp/reg.h>
+#include <csp/delay.h>
+
+/* ---- Private Constants and Types --------------------------------------- */
+
+/* VPM alignment algorithm uses this */
+#define MAX_PHASE_ADJUST_COUNT         0xFFFF	/* Max number of times allowed to adjust the phase */
+#define MAX_PHASE_ALIGN_ATTEMPTS       10	/* Max number of attempt to align the phase */
+
+/* Local definition of clock type */
+#define PLL_CLOCK                      1	/* PLL Clock */
+#define NON_PLL_CLOCK                  2	/* Divider clock */
+
+static int chipcHw_divide(int num, int denom)
+    __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+*  @brief   Set clock fequency for miscellaneous configurable clocks
+*
+*  This function sets clock frequency
+*
+*  @return  Configured clock frequency in hertz
+*
+*/
+/****************************************************************************/
+chipcHw_freq chipcHw_getClockFrequency(chipcHw_CLOCK_e clock	/*  [ IN ] Configurable clock */
+    ) {
+	volatile uint32_t *pPLLReg = (uint32_t *) 0x0;
+	volatile uint32_t *pClockCtrl = (uint32_t *) 0x0;
+	volatile uint32_t *pDependentClock = (uint32_t *) 0x0;
+	uint32_t vcoFreqPll1Hz = 0;	/* Effective VCO frequency for PLL1 in Hz */
+	uint32_t vcoFreqPll2Hz = 0;	/* Effective VCO frequency for PLL2 in Hz */
+	uint32_t dependentClockType = 0;
+	uint32_t vcoHz = 0;
+
+	/* Get VCO frequencies */
+	if ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK) != chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER) {
+		uint64_t adjustFreq = 0;
+
+		vcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz *
+		    chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
+		    ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
+		     chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
+
+		/* Adjusted frequency due to chipcHw_REG_PLL_DIVIDER_NDIV_f_SS */
+		adjustFreq = (uint64_t) chipcHw_XTAL_FREQ_Hz *
+			(uint64_t) chipcHw_REG_PLL_DIVIDER_NDIV_f_SS *
+			chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, (chipcHw_REG_PLL_PREDIVIDER_P2 * (uint64_t) chipcHw_REG_PLL_DIVIDER_FRAC));
+		vcoFreqPll1Hz += (uint32_t) adjustFreq;
+	} else {
+		vcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz *
+		    chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
+		    ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
+		     chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
+	}
+	vcoFreqPll2Hz =
+	    chipcHw_XTAL_FREQ_Hz *
+		 chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
+	    ((pChipcHw->PLLPreDivider2 & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
+	     chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
+
+	switch (clock) {
+	case chipcHw_CLOCK_DDR:
+		pPLLReg = &pChipcHw->DDRClock;
+		vcoHz = vcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_ARM:
+		pPLLReg = &pChipcHw->ARMClock;
+		vcoHz = vcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_ESW:
+		pPLLReg = &pChipcHw->ESWClock;
+		vcoHz = vcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_VPM:
+		pPLLReg = &pChipcHw->VPMClock;
+		vcoHz = vcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_ESW125:
+		pPLLReg = &pChipcHw->ESW125Clock;
+		vcoHz = vcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_UART:
+		pPLLReg = &pChipcHw->UARTClock;
+		vcoHz = vcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_SDIO0:
+		pPLLReg = &pChipcHw->SDIO0Clock;
+		vcoHz = vcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_SDIO1:
+		pPLLReg = &pChipcHw->SDIO1Clock;
+		vcoHz = vcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_SPI:
+		pPLLReg = &pChipcHw->SPIClock;
+		vcoHz = vcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_ETM:
+		pPLLReg = &pChipcHw->ETMClock;
+		vcoHz = vcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_USB:
+		pPLLReg = &pChipcHw->USBClock;
+		vcoHz = vcoFreqPll2Hz;
+		break;
+	case chipcHw_CLOCK_LCD:
+		pPLLReg = &pChipcHw->LCDClock;
+		vcoHz = vcoFreqPll2Hz;
+		break;
+	case chipcHw_CLOCK_APM:
+		pPLLReg = &pChipcHw->APMClock;
+		vcoHz = vcoFreqPll2Hz;
+		break;
+	case chipcHw_CLOCK_BUS:
+		pClockCtrl = &pChipcHw->ACLKClock;
+		pDependentClock = &pChipcHw->ARMClock;
+		vcoHz = vcoFreqPll1Hz;
+		dependentClockType = PLL_CLOCK;
+		break;
+	case chipcHw_CLOCK_OTP:
+		pClockCtrl = &pChipcHw->OTPClock;
+		break;
+	case chipcHw_CLOCK_I2C:
+		pClockCtrl = &pChipcHw->I2CClock;
+		break;
+	case chipcHw_CLOCK_I2S0:
+		pClockCtrl = &pChipcHw->I2S0Clock;
+		break;
+	case chipcHw_CLOCK_RTBUS:
+		pClockCtrl = &pChipcHw->RTBUSClock;
+		pDependentClock = &pChipcHw->ACLKClock;
+		dependentClockType = NON_PLL_CLOCK;
+		break;
+	case chipcHw_CLOCK_APM100:
+		pClockCtrl = &pChipcHw->APM100Clock;
+		pDependentClock = &pChipcHw->APMClock;
+		vcoHz = vcoFreqPll2Hz;
+		dependentClockType = PLL_CLOCK;
+		break;
+	case chipcHw_CLOCK_TSC:
+		pClockCtrl = &pChipcHw->TSCClock;
+		break;
+	case chipcHw_CLOCK_LED:
+		pClockCtrl = &pChipcHw->LEDClock;
+		break;
+	case chipcHw_CLOCK_I2S1:
+		pClockCtrl = &pChipcHw->I2S1Clock;
+		break;
+	}
+
+	if (pPLLReg) {
+		/* Obtain PLL clock frequency */
+		if (*pPLLReg & chipcHw_REG_PLL_CLOCK_BYPASS_SELECT) {
+			/* Return crystal clock frequency when bypassed */
+			return chipcHw_XTAL_FREQ_Hz;
+		} else if (clock == chipcHw_CLOCK_DDR) {
+			/* DDR frequency is configured in PLLDivider register */
+			return chipcHw_divide (vcoHz, (((pChipcHw->PLLDivider & 0xFF000000) >> 24) ? ((pChipcHw->PLLDivider & 0xFF000000) >> 24) : 256));
+		} else {
+			/* From chip revision number B0, LCD clock is internally divided by 2 */
+			if ((pPLLReg == &pChipcHw->LCDClock) && (chipcHw_getChipRevisionNumber() != chipcHw_REV_NUMBER_A0)) {
+				vcoHz >>= 1;
+			}
+			/* Obtain PLL clock frequency using VCO dividers */
+			return chipcHw_divide(vcoHz, ((*pPLLReg & chipcHw_REG_PLL_CLOCK_MDIV_MASK) ? (*pPLLReg & chipcHw_REG_PLL_CLOCK_MDIV_MASK) : 256));
+		}
+	} else if (pClockCtrl) {
+		/* Obtain divider clock frequency */
+		uint32_t div;
+		uint32_t freq = 0;
+
+		if (*pClockCtrl & chipcHw_REG_DIV_CLOCK_BYPASS_SELECT) {
+			/* Return crystal clock frequency when bypassed */
+			return chipcHw_XTAL_FREQ_Hz;
+		} else if (pDependentClock) {
+			/* Identify the dependent clock frequency */
+			switch (dependentClockType) {
+			case PLL_CLOCK:
+				if (*pDependentClock & chipcHw_REG_PLL_CLOCK_BYPASS_SELECT) {
+					/* Use crystal clock frequency when dependent PLL clock is bypassed */
+					freq = chipcHw_XTAL_FREQ_Hz;
+				} else {
+					/* Obtain PLL clock frequency using VCO dividers */
+					div = *pDependentClock & chipcHw_REG_PLL_CLOCK_MDIV_MASK;
+					freq = div ? chipcHw_divide(vcoHz, div) : 0;
+				}
+				break;
+			case NON_PLL_CLOCK:
+				if (pDependentClock == (uint32_t *) &pChipcHw->ACLKClock) {
+					freq = chipcHw_getClockFrequency (chipcHw_CLOCK_BUS);
+				} else {
+					if (*pDependentClock & chipcHw_REG_DIV_CLOCK_BYPASS_SELECT) {
+						/* Use crystal clock frequency when dependent divider clock is bypassed */
+						freq = chipcHw_XTAL_FREQ_Hz;
+					} else {
+						/* Obtain divider clock frequency using XTAL dividers */
+						div = *pDependentClock & chipcHw_REG_DIV_CLOCK_DIV_MASK;
+						freq = chipcHw_divide (chipcHw_XTAL_FREQ_Hz, (div ? div : 256));
+					}
+				}
+				break;
+			}
+		} else {
+			/* Dependent on crystal clock */
+			freq = chipcHw_XTAL_FREQ_Hz;
+		}
+
+		div = *pClockCtrl & chipcHw_REG_DIV_CLOCK_DIV_MASK;
+		return chipcHw_divide(freq, (div ? div : 256));
+	}
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Set clock fequency for miscellaneous configurable clocks
+*
+*  This function sets clock frequency
+*
+*  @return  Configured clock frequency in Hz
+*
+*/
+/****************************************************************************/
+chipcHw_freq chipcHw_setClockFrequency(chipcHw_CLOCK_e clock,	/*  [ IN ] Configurable clock */
+				       uint32_t freq	/*  [ IN ] Clock frequency in Hz */
+    ) {
+	volatile uint32_t *pPLLReg = (uint32_t *) 0x0;
+	volatile uint32_t *pClockCtrl = (uint32_t *) 0x0;
+	volatile uint32_t *pDependentClock = (uint32_t *) 0x0;
+	uint32_t vcoFreqPll1Hz = 0;	/* Effective VCO frequency for PLL1 in Hz */
+	uint32_t desVcoFreqPll1Hz = 0;	/* Desired VCO frequency for PLL1 in Hz */
+	uint32_t vcoFreqPll2Hz = 0;	/* Effective VCO frequency for PLL2 in Hz */
+	uint32_t dependentClockType = 0;
+	uint32_t vcoHz = 0;
+	uint32_t desVcoHz = 0;
+
+	/* Get VCO frequencies */
+	if ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK) != chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER) {
+		uint64_t adjustFreq = 0;
+
+		vcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz *
+		    chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
+		    ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
+		     chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
+
+		/* Adjusted frequency due to chipcHw_REG_PLL_DIVIDER_NDIV_f_SS */
+		adjustFreq = (uint64_t) chipcHw_XTAL_FREQ_Hz *
+			(uint64_t) chipcHw_REG_PLL_DIVIDER_NDIV_f_SS *
+			chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, (chipcHw_REG_PLL_PREDIVIDER_P2 * (uint64_t) chipcHw_REG_PLL_DIVIDER_FRAC));
+		vcoFreqPll1Hz += (uint32_t) adjustFreq;
+
+		/* Desired VCO frequency */
+		desVcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz *
+		    chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
+		    (((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
+		      chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT) + 1);
+	} else {
+		vcoFreqPll1Hz = desVcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz *
+		    chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
+		    ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
+		     chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
+	}
+	vcoFreqPll2Hz = chipcHw_XTAL_FREQ_Hz * chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
+	    ((pChipcHw->PLLPreDivider2 & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
+	     chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
+
+	switch (clock) {
+	case chipcHw_CLOCK_DDR:
+		/* Configure the DDR_ctrl:BUS ratio settings */
+		{
+			REG_LOCAL_IRQ_SAVE;
+			/* Dvide DDR_phy by two to obtain DDR_ctrl clock */
+			pChipcHw->DDRClock = (pChipcHw->DDRClock & ~chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_MASK) | ((((freq / 2) / chipcHw_getClockFrequency(chipcHw_CLOCK_BUS)) - 1)
+				<< chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_SHIFT);
+			REG_LOCAL_IRQ_RESTORE;
+		}
+		pPLLReg = &pChipcHw->DDRClock;
+		vcoHz = vcoFreqPll1Hz;
+		desVcoHz = desVcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_ARM:
+		pPLLReg = &pChipcHw->ARMClock;
+		vcoHz = vcoFreqPll1Hz;
+		desVcoHz = desVcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_ESW:
+		pPLLReg = &pChipcHw->ESWClock;
+		vcoHz = vcoFreqPll1Hz;
+		desVcoHz = desVcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_VPM:
+		/* Configure the VPM:BUS ratio settings */
+		{
+			REG_LOCAL_IRQ_SAVE;
+			pChipcHw->VPMClock = (pChipcHw->VPMClock & ~chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_MASK) | ((chipcHw_divide (freq, chipcHw_getClockFrequency(chipcHw_CLOCK_BUS)) - 1)
+				<< chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_SHIFT);
+			REG_LOCAL_IRQ_RESTORE;
+		}
+		pPLLReg = &pChipcHw->VPMClock;
+		vcoHz = vcoFreqPll1Hz;
+		desVcoHz = desVcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_ESW125:
+		pPLLReg = &pChipcHw->ESW125Clock;
+		vcoHz = vcoFreqPll1Hz;
+		desVcoHz = desVcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_UART:
+		pPLLReg = &pChipcHw->UARTClock;
+		vcoHz = vcoFreqPll1Hz;
+		desVcoHz = desVcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_SDIO0:
+		pPLLReg = &pChipcHw->SDIO0Clock;
+		vcoHz = vcoFreqPll1Hz;
+		desVcoHz = desVcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_SDIO1:
+		pPLLReg = &pChipcHw->SDIO1Clock;
+		vcoHz = vcoFreqPll1Hz;
+		desVcoHz = desVcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_SPI:
+		pPLLReg = &pChipcHw->SPIClock;
+		vcoHz = vcoFreqPll1Hz;
+		desVcoHz = desVcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_ETM:
+		pPLLReg = &pChipcHw->ETMClock;
+		vcoHz = vcoFreqPll1Hz;
+		desVcoHz = desVcoFreqPll1Hz;
+		break;
+	case chipcHw_CLOCK_USB:
+		pPLLReg = &pChipcHw->USBClock;
+		vcoHz = vcoFreqPll2Hz;
+		desVcoHz = vcoFreqPll2Hz;
+		break;
+	case chipcHw_CLOCK_LCD:
+		pPLLReg = &pChipcHw->LCDClock;
+		vcoHz = vcoFreqPll2Hz;
+		desVcoHz = vcoFreqPll2Hz;
+		break;
+	case chipcHw_CLOCK_APM:
+		pPLLReg = &pChipcHw->APMClock;
+		vcoHz = vcoFreqPll2Hz;
+		desVcoHz = vcoFreqPll2Hz;
+		break;
+	case chipcHw_CLOCK_BUS:
+		pClockCtrl = &pChipcHw->ACLKClock;
+		pDependentClock = &pChipcHw->ARMClock;
+		vcoHz = vcoFreqPll1Hz;
+		desVcoHz = desVcoFreqPll1Hz;
+		dependentClockType = PLL_CLOCK;
+		break;
+	case chipcHw_CLOCK_OTP:
+		pClockCtrl = &pChipcHw->OTPClock;
+		break;
+	case chipcHw_CLOCK_I2C:
+		pClockCtrl = &pChipcHw->I2CClock;
+		break;
+	case chipcHw_CLOCK_I2S0:
+		pClockCtrl = &pChipcHw->I2S0Clock;
+		break;
+	case chipcHw_CLOCK_RTBUS:
+		pClockCtrl = &pChipcHw->RTBUSClock;
+		pDependentClock = &pChipcHw->ACLKClock;
+		dependentClockType = NON_PLL_CLOCK;
+		break;
+	case chipcHw_CLOCK_APM100:
+		pClockCtrl = &pChipcHw->APM100Clock;
+		pDependentClock = &pChipcHw->APMClock;
+		vcoHz = vcoFreqPll2Hz;
+		desVcoHz = vcoFreqPll2Hz;
+		dependentClockType = PLL_CLOCK;
+		break;
+	case chipcHw_CLOCK_TSC:
+		pClockCtrl = &pChipcHw->TSCClock;
+		break;
+	case chipcHw_CLOCK_LED:
+		pClockCtrl = &pChipcHw->LEDClock;
+		break;
+	case chipcHw_CLOCK_I2S1:
+		pClockCtrl = &pChipcHw->I2S1Clock;
+		break;
+	}
+
+	if (pPLLReg) {
+		/* Select XTAL as bypass source */
+		reg32_modify_and(pPLLReg, ~chipcHw_REG_PLL_CLOCK_SOURCE_GPIO);
+		reg32_modify_or(pPLLReg, chipcHw_REG_PLL_CLOCK_BYPASS_SELECT);
+		/* For DDR settings use only the PLL divider clock */
+		if (pPLLReg == &pChipcHw->DDRClock) {
+			/* Set M1DIV for PLL1, which controls the DDR clock */
+			reg32_write(&pChipcHw->PLLDivider, (pChipcHw->PLLDivider & 0x00FFFFFF) | ((chipcHw_REG_PLL_DIVIDER_MDIV (desVcoHz, freq)) << 24));
+			/* Calculate expected frequency */
+			freq = chipcHw_divide(vcoHz, (((pChipcHw->PLLDivider & 0xFF000000) >> 24) ? ((pChipcHw->PLLDivider & 0xFF000000) >> 24) : 256));
+		} else {
+			/* From chip revision number B0, LCD clock is internally divided by 2 */
+			if ((pPLLReg == &pChipcHw->LCDClock) && (chipcHw_getChipRevisionNumber() != chipcHw_REV_NUMBER_A0)) {
+				desVcoHz >>= 1;
+				vcoHz >>= 1;
+			}
+			/* Set MDIV to change the frequency */
+			reg32_modify_and(pPLLReg, ~(chipcHw_REG_PLL_CLOCK_MDIV_MASK));
+			reg32_modify_or(pPLLReg, chipcHw_REG_PLL_DIVIDER_MDIV(desVcoHz, freq));
+			/* Calculate expected frequency */
+			freq = chipcHw_divide(vcoHz, ((*(pPLLReg) & chipcHw_REG_PLL_CLOCK_MDIV_MASK) ? (*(pPLLReg) & chipcHw_REG_PLL_CLOCK_MDIV_MASK) : 256));
+		}
+		/* Wait for for atleast 200ns as per the protocol to change frequency */
+		udelay(1);
+		/* Do not bypass */
+		reg32_modify_and(pPLLReg, ~chipcHw_REG_PLL_CLOCK_BYPASS_SELECT);
+		/* Return the configured frequency */
+		return freq;
+	} else if (pClockCtrl) {
+		uint32_t divider = 0;
+
+		/* Divider clock should not be bypassed  */
+		reg32_modify_and(pClockCtrl,
+				 ~chipcHw_REG_DIV_CLOCK_BYPASS_SELECT);
+
+		/* Identify the clock source */
+		if (pDependentClock) {
+			switch (dependentClockType) {
+			case PLL_CLOCK:
+				divider = chipcHw_divide(chipcHw_divide (desVcoHz, (*pDependentClock & chipcHw_REG_PLL_CLOCK_MDIV_MASK)), freq);
+				break;
+			case NON_PLL_CLOCK:
+				{
+					uint32_t sourceClock = 0;
+
+					if (pDependentClock == (uint32_t *) &pChipcHw->ACLKClock) {
+						sourceClock = chipcHw_getClockFrequency (chipcHw_CLOCK_BUS);
+					} else {
+						uint32_t div = *pDependentClock & chipcHw_REG_DIV_CLOCK_DIV_MASK;
+						sourceClock = chipcHw_divide (chipcHw_XTAL_FREQ_Hz, ((div) ? div : 256));
+					}
+					divider = chipcHw_divide(sourceClock, freq);
+				}
+				break;
+			}
+		} else {
+			divider = chipcHw_divide(chipcHw_XTAL_FREQ_Hz, freq);
+		}
+
+		if (divider) {
+			REG_LOCAL_IRQ_SAVE;
+			/* Set the divider to obtain the required frequency */
+			*pClockCtrl = (*pClockCtrl & (~chipcHw_REG_DIV_CLOCK_DIV_MASK)) | (((divider > 256) ? chipcHw_REG_DIV_CLOCK_DIV_256 : divider) & chipcHw_REG_DIV_CLOCK_DIV_MASK);
+			REG_LOCAL_IRQ_RESTORE;
+			return freq;
+		}
+	}
+
+	return 0;
+}
+
+EXPORT_SYMBOL(chipcHw_setClockFrequency);
+
+/****************************************************************************/
+/**
+*  @brief   Set VPM clock in sync with BUS clock for Chip Rev #A0
+*
+*  This function does the phase adjustment between VPM and BUS clock
+*
+*  @return >= 0 : On success (# of adjustment required)
+*            -1 : On failure
+*
+*/
+/****************************************************************************/
+static int vpmPhaseAlignA0(void)
+{
+	uint32_t phaseControl;
+	uint32_t phaseValue;
+	uint32_t prevPhaseComp;
+	int iter = 0;
+	int adjustCount = 0;
+	int count = 0;
+
+	for (iter = 0; (iter < MAX_PHASE_ALIGN_ATTEMPTS) && (adjustCount < MAX_PHASE_ADJUST_COUNT); iter++) {
+		phaseControl = (pChipcHw->VPMClock & chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK) >> chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT;
+		phaseValue = 0;
+		prevPhaseComp = 0;
+
+		/* Step 1: Look for falling PH_COMP transition */
+
+		/* Read the contents of VPM Clock resgister */
+		phaseValue = pChipcHw->VPMClock;
+		do {
+			/* Store previous value of phase comparator */
+			prevPhaseComp = phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP;
+			/* Change the value of PH_CTRL. */
+			reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
+			/* Wait atleast 20 ns */
+			udelay(1);
+			/* Toggle the LOAD_CH after phase control is written. */
+			pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
+			/* Read the contents of  VPM Clock resgister. */
+			phaseValue = pChipcHw->VPMClock;
+
+			if ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0x0) {
+				phaseControl = (0x3F & (phaseControl - 1));
+			} else {
+				/* Increment to the Phase count value for next write, if Phase is not stable. */
+				phaseControl = (0x3F & (phaseControl + 1));
+			}
+			/* Count number of adjustment made */
+			adjustCount++;
+		} while (((prevPhaseComp == (phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP)) ||	/* Look for a transition */
+			  ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) != 0x0)) &&	/* Look for a falling edge */
+			 (adjustCount < MAX_PHASE_ADJUST_COUNT)	/* Do not exceed the limit while trying */
+		    );
+
+		if (adjustCount >= MAX_PHASE_ADJUST_COUNT) {
+			/* Failed to align VPM phase after MAX_PHASE_ADJUST_COUNT tries */
+			return -1;
+		}
+
+		/* Step 2: Keep moving forward to make sure falling PH_COMP transition was valid */
+
+		for (count = 0; (count < 5) && ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0); count++) {
+			phaseControl = (0x3F & (phaseControl + 1));
+			reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
+			/* Wait atleast 20 ns */
+			udelay(1);
+			/* Toggle the LOAD_CH after phase control is written. */
+			pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
+			phaseValue = pChipcHw->VPMClock;
+			/* Count number of adjustment made */
+			adjustCount++;
+		}
+
+		if (adjustCount >= MAX_PHASE_ADJUST_COUNT) {
+			/* Failed to align VPM phase after MAX_PHASE_ADJUST_COUNT tries */
+			return -1;
+		}
+
+		if (count != 5) {
+			/* Detected false transition */
+			continue;
+		}
+
+		/* Step 3: Keep moving backward to make sure falling PH_COMP transition was stable */
+
+		for (count = 0; (count < 3) && ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0); count++) {
+			phaseControl = (0x3F & (phaseControl - 1));
+			reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
+			/* Wait atleast 20 ns */
+			udelay(1);
+			/* Toggle the LOAD_CH after phase control is written. */
+			pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
+			phaseValue = pChipcHw->VPMClock;
+			/* Count number of adjustment made */
+			adjustCount++;
+		}
+
+		if (adjustCount >= MAX_PHASE_ADJUST_COUNT) {
+			/* Failed to align VPM phase after MAX_PHASE_ADJUST_COUNT tries */
+			return -1;
+		}
+
+		if (count != 3) {
+			/* Detected noisy transition */
+			continue;
+		}
+
+		/* Step 4: Keep moving backward before the original transition took place. */
+
+		for (count = 0; (count < 5); count++) {
+			phaseControl = (0x3F & (phaseControl - 1));
+			reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
+			/* Wait atleast 20 ns */
+			udelay(1);
+			/* Toggle the LOAD_CH after phase control is written. */
+			pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
+			phaseValue = pChipcHw->VPMClock;
+			/* Count number of adjustment made */
+			adjustCount++;
+		}
+
+		if (adjustCount >= MAX_PHASE_ADJUST_COUNT) {
+			/* Failed to align VPM phase after MAX_PHASE_ADJUST_COUNT tries */
+			return -1;
+		}
+
+		if ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0) {
+			/* Detected false transition */
+			continue;
+		}
+
+		/* Step 5: Re discover the valid transition */
+
+		do {
+			/* Store previous value of phase comparator */
+			prevPhaseComp = phaseValue;
+			/* Change the value of PH_CTRL. */
+			reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
+			/* Wait atleast 20 ns */
+			udelay(1);
+			/* Toggle the LOAD_CH after phase control is written. */
+			pChipcHw->VPMClock ^=
+			    chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
+			/* Read the contents of  VPM Clock resgister. */
+			phaseValue = pChipcHw->VPMClock;
+
+			if ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0x0) {
+				phaseControl = (0x3F & (phaseControl - 1));
+			} else {
+				/* Increment to the Phase count value for next write, if Phase is not stable. */
+				phaseControl = (0x3F & (phaseControl + 1));
+			}
+
+			/* Count number of adjustment made */
+			adjustCount++;
+		} while (((prevPhaseComp == (phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP)) || ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) != 0x0)) && (adjustCount < MAX_PHASE_ADJUST_COUNT));
+
+		if (adjustCount >= MAX_PHASE_ADJUST_COUNT) {
+			/* Failed to align VPM phase after MAX_PHASE_ADJUST_COUNT tries  */
+			return -1;
+		} else {
+			/* Valid phase must have detected */
+			break;
+		}
+	}
+
+	/* For VPM Phase should be perfectly aligned. */
+	phaseControl = (((pChipcHw->VPMClock >> chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT) - 1) & 0x3F);
+	{
+		REG_LOCAL_IRQ_SAVE;
+
+		pChipcHw->VPMClock = (pChipcHw->VPMClock & ~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT);
+		/* Load new phase value */
+		pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
+
+		REG_LOCAL_IRQ_RESTORE;
+	}
+	/* Return the status */
+	return (int)adjustCount;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Set VPM clock in sync with BUS clock
+*
+*  This function does the phase adjustment between VPM and BUS clock
+*
+*  @return >= 0 : On success (# of adjustment required)
+*            -1 : On failure
+*
+*/
+/****************************************************************************/
+int chipcHw_vpmPhaseAlign(void)
+{
+
+	if (chipcHw_getChipRevisionNumber() == chipcHw_REV_NUMBER_A0) {
+		return vpmPhaseAlignA0();
+	} else {
+		uint32_t phaseControl = chipcHw_getVpmPhaseControl();
+		uint32_t phaseValue = 0;
+		int adjustCount = 0;
+
+		/* Disable VPM access */
+		pChipcHw->Spare1 &= ~chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE;
+		/* Disable HW VPM phase alignment  */
+		chipcHw_vpmHwPhaseAlignDisable();
+		/* Enable SW VPM phase alignment  */
+		chipcHw_vpmSwPhaseAlignEnable();
+		/* Adjust VPM phase */
+		while (adjustCount < MAX_PHASE_ADJUST_COUNT) {
+			phaseValue = chipcHw_getVpmHwPhaseAlignStatus();
+
+			/* Adjust phase control value */
+			if (phaseValue > 0xF) {
+				/* Increment phase control value */
+				phaseControl++;
+			} else if (phaseValue < 0xF) {
+				/* Decrement phase control value */
+				phaseControl--;
+			} else {
+				/* Enable VPM access */
+				pChipcHw->Spare1 |= chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE;
+				/* Return adjust count */
+				return adjustCount;
+			}
+			/* Change the value of PH_CTRL. */
+			reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
+			/* Wait atleast 20 ns */
+			udelay(1);
+			/* Toggle the LOAD_CH after phase control is written. */
+			pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
+			/* Count adjustment */
+			adjustCount++;
+		}
+	}
+
+	/* Disable VPM access */
+	pChipcHw->Spare1 &= ~chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE;
+	return -1;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Local Divide function
+*
+*  This function does the divide
+*
+*  @return divide value
+*
+*/
+/****************************************************************************/
+static int chipcHw_divide(int num, int denom)
+{
+	int r;
+	int t = 1;
+
+	/* Shift denom and t up to the largest value to optimize algorithm */
+	/* t contains the units of each divide */
+	while ((denom & 0x40000000) == 0) {	/* fails if denom=0 */
+		denom = denom << 1;
+		t = t << 1;
+	}
+
+	/* Intialize the result */
+	r = 0;
+
+	do {
+		/* Determine if there exists a positive remainder */
+		if ((num - denom) >= 0) {
+			/* Accumlate t to the result and calculate a new remainder */
+			num = num - denom;
+			r = r + t;
+		}
+		/* Continue to shift denom and shift t down to 0 */
+		denom = denom >> 1;
+		t = t >> 1;
+	} while (t != 0);
+
+	return r;
+}
diff --git a/arch/arm/mach-bcmring/csp/chipc/chipcHw_init.c b/arch/arm/mach-bcmring/csp/chipc/chipcHw_init.c
new file mode 100644
index 00000000000..367df75d4bb
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/chipc/chipcHw_init.c
@@ -0,0 +1,293 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    chipcHw_init.c
+*
+*  @brief   Low level CHIPC PLL configuration functions
+*
+*  @note
+*
+*   These routines provide basic PLL controlling functionality only.
+*/
+/****************************************************************************/
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <csp/errno.h>
+#include <csp/stdint.h>
+#include <csp/module.h>
+
+#include <mach/csp/chipcHw_def.h>
+#include <mach/csp/chipcHw_inline.h>
+
+#include <csp/reg.h>
+#include <csp/delay.h>
+/* ---- Private Constants and Types --------------------------------------- */
+
+/*
+    Calculation for NDIV_i to obtain VCO frequency
+    -----------------------------------------------
+
+	Freq_vco = Freq_ref * (P2 / P1) * (PLL_NDIV_i + PLL_NDIV_f)
+	for Freq_vco = VCO_FREQ_MHz
+		Freq_ref = chipcHw_XTAL_FREQ_Hz
+		PLL_P1 = PLL_P2 = 1
+		and
+		PLL_NDIV_f = 0
+
+	We get:
+		PLL_NDIV_i = Freq_vco / Freq_ref = VCO_FREQ_MHz / chipcHw_XTAL_FREQ_Hz
+
+    Calculation for PLL MDIV to obtain frequency Freq_x for channel x
+    -----------------------------------------------------------------
+		Freq_x = chipcHw_XTAL_FREQ_Hz * PLL_NDIV_i / PLL_MDIV_x = VCO_FREQ_MHz / PLL_MDIV_x
+
+		PLL_MDIV_x = VCO_FREQ_MHz / Freq_x
+*/
+
+/* ---- Private Variables ------------------------------------------------- */
+/****************************************************************************/
+/**
+*  @brief  Initializes the PLL2
+*
+*  This function initializes the PLL2
+*
+*/
+/****************************************************************************/
+void chipcHw_pll2Enable(uint32_t vcoFreqHz)
+{
+	uint32_t pllPreDivider2 = 0;
+
+	{
+		REG_LOCAL_IRQ_SAVE;
+		pChipcHw->PLLConfig2 =
+		    chipcHw_REG_PLL_CONFIG_D_RESET |
+		    chipcHw_REG_PLL_CONFIG_A_RESET;
+
+		pllPreDivider2 = chipcHw_REG_PLL_PREDIVIDER_POWER_DOWN |
+		    chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER |
+		    (chipcHw_REG_PLL_PREDIVIDER_NDIV_i(vcoFreqHz) <<
+		     chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT) |
+		    (chipcHw_REG_PLL_PREDIVIDER_P1 <<
+		     chipcHw_REG_PLL_PREDIVIDER_P1_SHIFT) |
+		    (chipcHw_REG_PLL_PREDIVIDER_P2 <<
+		     chipcHw_REG_PLL_PREDIVIDER_P2_SHIFT);
+
+		/* Enable CHIPC registers to control the PLL */
+		pChipcHw->PLLStatus |= chipcHw_REG_PLL_STATUS_CONTROL_ENABLE;
+
+		/* Set pre divider to get desired VCO frequency */
+		pChipcHw->PLLPreDivider2 = pllPreDivider2;
+		/* Set NDIV Frac */
+		pChipcHw->PLLDivider2 = chipcHw_REG_PLL_DIVIDER_NDIV_f;
+
+		/* This has to be removed once the default values are fixed for PLL2. */
+		pChipcHw->PLLControl12 = 0x38000700;
+		pChipcHw->PLLControl22 = 0x00000015;
+
+		/* Reset PLL2 */
+		if (vcoFreqHz > chipcHw_REG_PLL_CONFIG_VCO_SPLIT_FREQ) {
+			pChipcHw->PLLConfig2 = chipcHw_REG_PLL_CONFIG_D_RESET |
+			    chipcHw_REG_PLL_CONFIG_A_RESET |
+			    chipcHw_REG_PLL_CONFIG_VCO_1601_3200 |
+			    chipcHw_REG_PLL_CONFIG_POWER_DOWN;
+		} else {
+			pChipcHw->PLLConfig2 = chipcHw_REG_PLL_CONFIG_D_RESET |
+			    chipcHw_REG_PLL_CONFIG_A_RESET |
+			    chipcHw_REG_PLL_CONFIG_VCO_800_1600 |
+			    chipcHw_REG_PLL_CONFIG_POWER_DOWN;
+		}
+		REG_LOCAL_IRQ_RESTORE;
+	}
+
+	/* Insert certain amount of delay before deasserting ARESET. */
+	udelay(1);
+
+	{
+		REG_LOCAL_IRQ_SAVE;
+		/* Remove analog reset and Power on the PLL */
+		pChipcHw->PLLConfig2 &=
+		    ~(chipcHw_REG_PLL_CONFIG_A_RESET |
+		      chipcHw_REG_PLL_CONFIG_POWER_DOWN);
+
+		REG_LOCAL_IRQ_RESTORE;
+
+	}
+
+	/* Wait until PLL is locked */
+	while (!(pChipcHw->PLLStatus2 & chipcHw_REG_PLL_STATUS_LOCKED))
+		;
+
+	{
+		REG_LOCAL_IRQ_SAVE;
+		/* Remove digital reset */
+		pChipcHw->PLLConfig2 &= ~chipcHw_REG_PLL_CONFIG_D_RESET;
+
+		REG_LOCAL_IRQ_RESTORE;
+	}
+}
+
+EXPORT_SYMBOL(chipcHw_pll2Enable);
+
+/****************************************************************************/
+/**
+*  @brief  Initializes the PLL1
+*
+*  This function initializes the PLL1
+*
+*/
+/****************************************************************************/
+void chipcHw_pll1Enable(uint32_t vcoFreqHz, chipcHw_SPREAD_SPECTRUM_e ssSupport)
+{
+	uint32_t pllPreDivider = 0;
+
+	{
+		REG_LOCAL_IRQ_SAVE;
+
+		pChipcHw->PLLConfig =
+		    chipcHw_REG_PLL_CONFIG_D_RESET |
+		    chipcHw_REG_PLL_CONFIG_A_RESET;
+		/* Setting VCO frequency */
+		if (ssSupport == chipcHw_SPREAD_SPECTRUM_ALLOW) {
+			pllPreDivider =
+			    chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASH_1_8 |
+			    ((chipcHw_REG_PLL_PREDIVIDER_NDIV_i(vcoFreqHz) -
+			      1) << chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT) |
+			    (chipcHw_REG_PLL_PREDIVIDER_P1 <<
+			     chipcHw_REG_PLL_PREDIVIDER_P1_SHIFT) |
+			    (chipcHw_REG_PLL_PREDIVIDER_P2 <<
+			     chipcHw_REG_PLL_PREDIVIDER_P2_SHIFT);
+		} else {
+			pllPreDivider = chipcHw_REG_PLL_PREDIVIDER_POWER_DOWN |
+			    chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER |
+			    (chipcHw_REG_PLL_PREDIVIDER_NDIV_i(vcoFreqHz) <<
+			     chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT) |
+			    (chipcHw_REG_PLL_PREDIVIDER_P1 <<
+			     chipcHw_REG_PLL_PREDIVIDER_P1_SHIFT) |
+			    (chipcHw_REG_PLL_PREDIVIDER_P2 <<
+			     chipcHw_REG_PLL_PREDIVIDER_P2_SHIFT);
+		}
+
+		/* Enable CHIPC registers to control the PLL */
+		pChipcHw->PLLStatus |= chipcHw_REG_PLL_STATUS_CONTROL_ENABLE;
+
+		/* Set pre divider to get desired VCO frequency */
+		pChipcHw->PLLPreDivider = pllPreDivider;
+		/* Set NDIV Frac */
+		if (ssSupport == chipcHw_SPREAD_SPECTRUM_ALLOW) {
+			pChipcHw->PLLDivider = chipcHw_REG_PLL_DIVIDER_M1DIV |
+			    chipcHw_REG_PLL_DIVIDER_NDIV_f_SS;
+		} else {
+			pChipcHw->PLLDivider = chipcHw_REG_PLL_DIVIDER_M1DIV |
+			    chipcHw_REG_PLL_DIVIDER_NDIV_f;
+		}
+
+		/* Reset PLL1 */
+		if (vcoFreqHz > chipcHw_REG_PLL_CONFIG_VCO_SPLIT_FREQ) {
+			pChipcHw->PLLConfig = chipcHw_REG_PLL_CONFIG_D_RESET |
+			    chipcHw_REG_PLL_CONFIG_A_RESET |
+			    chipcHw_REG_PLL_CONFIG_VCO_1601_3200 |
+			    chipcHw_REG_PLL_CONFIG_POWER_DOWN;
+		} else {
+			pChipcHw->PLLConfig = chipcHw_REG_PLL_CONFIG_D_RESET |
+			    chipcHw_REG_PLL_CONFIG_A_RESET |
+			    chipcHw_REG_PLL_CONFIG_VCO_800_1600 |
+			    chipcHw_REG_PLL_CONFIG_POWER_DOWN;
+		}
+
+		REG_LOCAL_IRQ_RESTORE;
+
+		/* Insert certain amount of delay before deasserting ARESET. */
+		udelay(1);
+
+		{
+			REG_LOCAL_IRQ_SAVE;
+			/* Remove analog reset and Power on the PLL */
+			pChipcHw->PLLConfig &=
+			    ~(chipcHw_REG_PLL_CONFIG_A_RESET |
+			      chipcHw_REG_PLL_CONFIG_POWER_DOWN);
+			REG_LOCAL_IRQ_RESTORE;
+		}
+
+		/* Wait until PLL is locked */
+		while (!(pChipcHw->PLLStatus & chipcHw_REG_PLL_STATUS_LOCKED)
+		       || !(pChipcHw->
+			    PLLStatus2 & chipcHw_REG_PLL_STATUS_LOCKED))
+			;
+
+		/* Remove digital reset */
+		{
+			REG_LOCAL_IRQ_SAVE;
+			pChipcHw->PLLConfig &= ~chipcHw_REG_PLL_CONFIG_D_RESET;
+			REG_LOCAL_IRQ_RESTORE;
+		}
+	}
+}
+
+EXPORT_SYMBOL(chipcHw_pll1Enable);
+
+/****************************************************************************/
+/**
+*  @brief  Initializes the chipc module
+*
+*  This function initializes the PLLs and core system clocks
+*
+*/
+/****************************************************************************/
+
+void chipcHw_Init(chipcHw_INIT_PARAM_t *initParam	/*  [ IN ] Misc chip initialization parameter */
+    ) {
+#if !(defined(__KERNEL__) && !defined(STANDALONE))
+	delay_init();
+#endif
+
+	/* Do not program PLL, when warm reset */
+	if (!(chipcHw_getStickyBits() & chipcHw_REG_STICKY_CHIP_WARM_RESET)) {
+		chipcHw_pll1Enable(initParam->pllVcoFreqHz,
+				   initParam->ssSupport);
+		chipcHw_pll2Enable(initParam->pll2VcoFreqHz);
+	} else {
+		/* Clear sticky bits */
+		chipcHw_clearStickyBits(chipcHw_REG_STICKY_CHIP_WARM_RESET);
+	}
+	/* Clear sticky bits */
+	chipcHw_clearStickyBits(chipcHw_REG_STICKY_CHIP_SOFT_RESET);
+
+	/* Before configuring the ARM clock, atleast we need to make sure BUS clock maintains the proper ratio with ARM clock */
+	pChipcHw->ACLKClock =
+	    (pChipcHw->
+	     ACLKClock & ~chipcHw_REG_ACLKClock_CLK_DIV_MASK) | (initParam->
+								 armBusRatio &
+								 chipcHw_REG_ACLKClock_CLK_DIV_MASK);
+
+	/* Set various core component frequencies. The order in which this is done is important for some. */
+	/* The RTBUS (DDR PHY) is derived from the BUS, and the BUS from the ARM, and VPM needs to know BUS */
+	/* frequency to find its ratio with the BUS.  Hence we must set the ARM first, followed by the BUS,  */
+	/* then VPM and RTBUS. */
+
+	chipcHw_setClockFrequency(chipcHw_CLOCK_ARM,
+				  initParam->busClockFreqHz *
+				  initParam->armBusRatio);
+	chipcHw_setClockFrequency(chipcHw_CLOCK_BUS, initParam->busClockFreqHz);
+	chipcHw_setClockFrequency(chipcHw_CLOCK_VPM,
+				  initParam->busClockFreqHz *
+				  initParam->vpmBusRatio);
+	chipcHw_setClockFrequency(chipcHw_CLOCK_DDR,
+				  initParam->busClockFreqHz *
+				  initParam->ddrBusRatio);
+	chipcHw_setClockFrequency(chipcHw_CLOCK_RTBUS,
+				  initParam->busClockFreqHz / 2);
+}
diff --git a/arch/arm/mach-bcmring/csp/chipc/chipcHw_reset.c b/arch/arm/mach-bcmring/csp/chipc/chipcHw_reset.c
new file mode 100644
index 00000000000..2671d8896bb
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/chipc/chipcHw_reset.c
@@ -0,0 +1,124 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/* ---- Include Files ---------------------------------------------------- */
+#include <csp/stdint.h>
+#include <mach/csp/chipcHw_def.h>
+#include <mach/csp/chipcHw_inline.h>
+#include <csp/intcHw.h>
+#include <csp/cache.h>
+
+/* ---- Private Constants and Types --------------------------------------- */
+/* ---- Private Variables ------------------------------------------------- */
+void chipcHw_reset_run_from_aram(void);
+
+typedef void (*RUNFUNC) (void);
+
+/****************************************************************************/
+/**
+*  @brief   warmReset
+*
+*  @note warmReset configures the clocks which are not reset back to the state
+*   required to execute on reset.  To do so we need to copy the code into internal
+*   memory to change the ARM clock while we are not executing from DDR.
+*/
+/****************************************************************************/
+void chipcHw_reset(uint32_t mask)
+{
+	int i = 0;
+	RUNFUNC runFunc = (RUNFUNC) (unsigned long)MM_ADDR_IO_ARAM;
+
+	/* Disable all interrupts */
+	intcHw_irq_disable(INTCHW_INTC0, 0xffffffff);
+	intcHw_irq_disable(INTCHW_INTC1, 0xffffffff);
+	intcHw_irq_disable(INTCHW_SINTC, 0xffffffff);
+
+	{
+		REG_LOCAL_IRQ_SAVE;
+		if (mask & chipcHw_REG_SOFT_RESET_CHIP_SOFT) {
+			chipcHw_softReset(chipcHw_REG_SOFT_RESET_CHIP_SOFT);
+		}
+		/* Bypass the PLL clocks before reboot */
+		pChipcHw->UARTClock |= chipcHw_REG_PLL_CLOCK_BYPASS_SELECT;
+		pChipcHw->SPIClock |= chipcHw_REG_PLL_CLOCK_BYPASS_SELECT;
+
+		/* Copy the chipcHw_warmReset_run_from_aram function into ARAM */
+		do {
+			((uint32_t *) MM_IO_BASE_ARAM)[i] =
+			    ((uint32_t *) &chipcHw_reset_run_from_aram)[i];
+			i++;
+		} while (((uint32_t *) MM_IO_BASE_ARAM)[i - 1] != 0xe1a0f00f);	/* 0xe1a0f00f == asm ("mov r15, r15"); */
+
+		CSP_CACHE_FLUSH_ALL;
+
+		/* run the function from ARAM */
+		runFunc();
+
+		/* Code will never get here, but include it to balance REG_LOCAL_IRQ_SAVE above */
+		REG_LOCAL_IRQ_RESTORE;
+	}
+}
+
+/* This function must run from internal memory */
+void chipcHw_reset_run_from_aram(void)
+{
+/* Make sure, pipeline is filled with instructions coming from ARAM */
+__asm (" nop                                                            \n\t"
+		" nop                                                            \n\t"
+#if defined(__KERNEL__) && !defined(STANDALONE)
+		" MRC      p15,#0x0,r0,c1,c0,#0                                  \n\t"
+		" BIC      r0,r0,#0xd                                            \n\t"
+		" MCR      p15,#0x0,r0,c1,c0,#0                                  \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+#endif
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+/* Bypass the ARM clock and switch to XTAL clock */
+		" MOV      r2,#0x80000000                                        \n\t"
+		" LDR      r3,[r2,#8]                                            \n\t"
+		" ORR      r3,r3,#0x20000                                        \n\t"
+		" STR      r3,[r2,#8]                                            \n\t"
+
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+		" nop                                                            \n\t"
+/* Issue reset */
+		" MOV      r3,#0x2                                               \n\t"
+		" STR      r3,[r2,#0x80]                                         \n\t"
+/* End here */
+		" MOV      pc,pc                                                 \n\t");
+/* 0xe1a0f00f ==  asm ("mov r15, r15"); */
+}
diff --git a/arch/arm/mach-bcmring/csp/chipc/chipcHw_str.c b/arch/arm/mach-bcmring/csp/chipc/chipcHw_str.c
new file mode 100644
index 00000000000..54ad964fe94
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/chipc/chipcHw_str.c
@@ -0,0 +1,64 @@
+/*****************************************************************************
+* Copyright 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+/****************************************************************************/
+/**
+*  @file    chipcHw_str.c
+*
+*  @brief   Contains strings which are useful to linux and csp
+*
+*  @note
+*/
+/****************************************************************************/
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <mach/csp/chipcHw_inline.h>
+
+/* ---- Private Constants and Types --------------------------------------- */
+
+static const char *gMuxStr[] = {
+	"GPIO",			/* 0 */
+	"KeyPad",		/* 1 */
+	"I2C-Host",		/* 2 */
+	"SPI",			/* 3 */
+	"Uart",			/* 4 */
+	"LED-Mtx-P",		/* 5 */
+	"LED-Mtx-S",		/* 6 */
+	"SDIO-0",		/* 7 */
+	"SDIO-1",		/* 8 */
+	"PCM",			/* 9 */
+	"I2S",			/* 10 */
+	"ETM",			/* 11 */
+	"Debug",		/* 12 */
+	"Misc",			/* 13 */
+	"0xE",			/* 14 */
+	"0xF",			/* 15 */
+};
+
+/****************************************************************************/
+/**
+*  @brief   Retrieves a string representation of the mux setting for a pin.
+*
+*  @return  Pointer to a character string.
+*/
+/****************************************************************************/
+
+const char *chipcHw_getGpioPinFunctionStr(int pin)
+{
+	if ((pin < 0) || (pin >= chipcHw_GPIO_COUNT)) {
+		return "";
+	}
+
+	return gMuxStr[chipcHw_getGpioPinFunction(pin)];
+}
-- 
cgit v1.2.3


From 1a4a561bdd838b4455d57edf0deaf83e894d795e Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Fri, 7 Aug 2009 20:07:22 +0100
Subject: ARM: 5658/1: bcmring: add csp dmac header files

add csp dmac header files

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-bcmring/include/csp/dmacHw.h         | 596 +++++++++++++++++++++
 .../mach-bcmring/include/mach/csp/dmacHw_priv.h    | 145 +++++
 .../arm/mach-bcmring/include/mach/csp/dmacHw_reg.h | 406 ++++++++++++++
 3 files changed, 1147 insertions(+)
 create mode 100644 arch/arm/mach-bcmring/include/csp/dmacHw.h
 create mode 100644 arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h
 create mode 100644 arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h

(limited to 'arch')

diff --git a/arch/arm/mach-bcmring/include/csp/dmacHw.h b/arch/arm/mach-bcmring/include/csp/dmacHw.h
new file mode 100644
index 00000000000..5d510130a25
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/dmacHw.h
@@ -0,0 +1,596 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    dmacHw.h
+*
+*  @brief   API definitions for low level DMA controller driver
+*
+*/
+/****************************************************************************/
+#ifndef _DMACHW_H
+#define _DMACHW_H
+
+#include <stddef.h>
+
+#include <csp/stdint.h>
+#include <mach/csp/dmacHw_reg.h>
+
+/* Define DMA Channel ID using DMA controller number (m) and channel number (c).
+
+   System specific channel ID should be defined as follows
+
+   For example:
+
+   #include <dmacHw.h>
+   ...
+   #define systemHw_LCD_CHANNEL_ID                dmacHw_MAKE_CHANNEL_ID(0,5)
+   #define systemHw_SWITCH_RX_CHANNEL_ID          dmacHw_MAKE_CHANNEL_ID(0,0)
+   #define systemHw_SWITCH_TX_CHANNEL_ID          dmacHw_MAKE_CHANNEL_ID(0,1)
+   #define systemHw_APM_RX_CHANNEL_ID             dmacHw_MAKE_CHANNEL_ID(0,3)
+   #define systemHw_APM_TX_CHANNEL_ID             dmacHw_MAKE_CHANNEL_ID(0,4)
+   ...
+   #define systemHw_SHARED1_CHANNEL_ID            dmacHw_MAKE_CHANNEL_ID(1,4)
+   #define systemHw_SHARED2_CHANNEL_ID            dmacHw_MAKE_CHANNEL_ID(1,5)
+   #define systemHw_SHARED3_CHANNEL_ID            dmacHw_MAKE_CHANNEL_ID(0,6)
+   ...
+*/
+#define dmacHw_MAKE_CHANNEL_ID(m, c)         (m << 8 | c)
+
+typedef enum {
+	dmacHw_CHANNEL_PRIORITY_0 = dmacHw_REG_CFG_LO_CH_PRIORITY_0,	/* Channel priority 0. Lowest priority DMA channel */
+	dmacHw_CHANNEL_PRIORITY_1 = dmacHw_REG_CFG_LO_CH_PRIORITY_1,	/* Channel priority 1 */
+	dmacHw_CHANNEL_PRIORITY_2 = dmacHw_REG_CFG_LO_CH_PRIORITY_2,	/* Channel priority 2 */
+	dmacHw_CHANNEL_PRIORITY_3 = dmacHw_REG_CFG_LO_CH_PRIORITY_3,	/* Channel priority 3 */
+	dmacHw_CHANNEL_PRIORITY_4 = dmacHw_REG_CFG_LO_CH_PRIORITY_4,	/* Channel priority 4 */
+	dmacHw_CHANNEL_PRIORITY_5 = dmacHw_REG_CFG_LO_CH_PRIORITY_5,	/* Channel priority 5 */
+	dmacHw_CHANNEL_PRIORITY_6 = dmacHw_REG_CFG_LO_CH_PRIORITY_6,	/* Channel priority 6 */
+	dmacHw_CHANNEL_PRIORITY_7 = dmacHw_REG_CFG_LO_CH_PRIORITY_7	/* Channel priority 7. Highest priority DMA channel */
+} dmacHw_CHANNEL_PRIORITY_e;
+
+/* Source destination master interface */
+typedef enum {
+	dmacHw_SRC_MASTER_INTERFACE_1 = dmacHw_REG_CTL_SMS_1,	/* Source DMA master interface 1 */
+	dmacHw_SRC_MASTER_INTERFACE_2 = dmacHw_REG_CTL_SMS_2,	/* Source DMA master interface 2 */
+	dmacHw_DST_MASTER_INTERFACE_1 = dmacHw_REG_CTL_DMS_1,	/* Destination DMA master interface 1 */
+	dmacHw_DST_MASTER_INTERFACE_2 = dmacHw_REG_CTL_DMS_2	/* Destination DMA master interface 2 */
+} dmacHw_MASTER_INTERFACE_e;
+
+typedef enum {
+	dmacHw_SRC_TRANSACTION_WIDTH_8 = dmacHw_REG_CTL_SRC_TR_WIDTH_8,	/* Source 8 bit  (1 byte) per transaction */
+	dmacHw_SRC_TRANSACTION_WIDTH_16 = dmacHw_REG_CTL_SRC_TR_WIDTH_16,	/* Source 16 bit (2 byte) per transaction */
+	dmacHw_SRC_TRANSACTION_WIDTH_32 = dmacHw_REG_CTL_SRC_TR_WIDTH_32,	/* Source 32 bit (4 byte) per transaction */
+	dmacHw_SRC_TRANSACTION_WIDTH_64 = dmacHw_REG_CTL_SRC_TR_WIDTH_64,	/* Source 64 bit (8 byte) per transaction */
+	dmacHw_DST_TRANSACTION_WIDTH_8 = dmacHw_REG_CTL_DST_TR_WIDTH_8,	/* Destination 8 bit  (1 byte) per transaction */
+	dmacHw_DST_TRANSACTION_WIDTH_16 = dmacHw_REG_CTL_DST_TR_WIDTH_16,	/* Destination 16 bit (2 byte) per transaction */
+	dmacHw_DST_TRANSACTION_WIDTH_32 = dmacHw_REG_CTL_DST_TR_WIDTH_32,	/* Destination 32 bit (4 byte) per transaction */
+	dmacHw_DST_TRANSACTION_WIDTH_64 = dmacHw_REG_CTL_DST_TR_WIDTH_64	/* Destination 64 bit (8 byte) per transaction */
+} dmacHw_TRANSACTION_WIDTH_e;
+
+typedef enum {
+	dmacHw_SRC_BURST_WIDTH_0 = dmacHw_REG_CTL_SRC_MSIZE_0,	/* Source No burst */
+	dmacHw_SRC_BURST_WIDTH_4 = dmacHw_REG_CTL_SRC_MSIZE_4,	/* Source 4  X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
+	dmacHw_SRC_BURST_WIDTH_8 = dmacHw_REG_CTL_SRC_MSIZE_8,	/* Source 8  X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
+	dmacHw_SRC_BURST_WIDTH_16 = dmacHw_REG_CTL_SRC_MSIZE_16,	/* Source 16 X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
+	dmacHw_DST_BURST_WIDTH_0 = dmacHw_REG_CTL_DST_MSIZE_0,	/* Destination No burst */
+	dmacHw_DST_BURST_WIDTH_4 = dmacHw_REG_CTL_DST_MSIZE_4,	/* Destination 4  X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
+	dmacHw_DST_BURST_WIDTH_8 = dmacHw_REG_CTL_DST_MSIZE_8,	/* Destination 8  X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
+	dmacHw_DST_BURST_WIDTH_16 = dmacHw_REG_CTL_DST_MSIZE_16	/* Destination 16 X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */
+} dmacHw_BURST_WIDTH_e;
+
+typedef enum {
+	dmacHw_TRANSFER_TYPE_MEM_TO_MEM = dmacHw_REG_CTL_TTFC_MM_DMAC,	/* Memory to memory transfer */
+	dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM = dmacHw_REG_CTL_TTFC_PM_DMAC,	/* Peripheral to memory transfer */
+	dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL = dmacHw_REG_CTL_TTFC_MP_DMAC,	/* Memory to peripheral transfer */
+	dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_PERIPHERAL = dmacHw_REG_CTL_TTFC_PP_DMAC	/* Peripheral to peripheral transfer */
+} dmacHw_TRANSFER_TYPE_e;
+
+typedef enum {
+	dmacHw_TRANSFER_MODE_PERREQUEST,	/* Block transfer per DMA request */
+	dmacHw_TRANSFER_MODE_CONTINUOUS,	/* Continuous transfer of streaming data */
+	dmacHw_TRANSFER_MODE_PERIODIC	/* Periodic transfer of streaming data */
+} dmacHw_TRANSFER_MODE_e;
+
+typedef enum {
+	dmacHw_SRC_ADDRESS_UPDATE_MODE_INC = dmacHw_REG_CTL_SINC_INC,	/* Increment source address after every transaction */
+	dmacHw_SRC_ADDRESS_UPDATE_MODE_DEC = dmacHw_REG_CTL_SINC_DEC,	/* Decrement source address after every transaction */
+	dmacHw_DST_ADDRESS_UPDATE_MODE_INC = dmacHw_REG_CTL_DINC_INC,	/* Increment destination address after every transaction */
+	dmacHw_DST_ADDRESS_UPDATE_MODE_DEC = dmacHw_REG_CTL_DINC_DEC,	/* Decrement destination address after every transaction */
+	dmacHw_SRC_ADDRESS_UPDATE_MODE_NC = dmacHw_REG_CTL_SINC_NC,	/* No change in source address after every transaction */
+	dmacHw_DST_ADDRESS_UPDATE_MODE_NC = dmacHw_REG_CTL_DINC_NC	/* No change in destination address after every transaction */
+} dmacHw_ADDRESS_UPDATE_MODE_e;
+
+typedef enum {
+	dmacHw_FLOW_CONTROL_DMA,	/* DMA working as flow controller (default) */
+	dmacHw_FLOW_CONTROL_PERIPHERAL	/* Peripheral working as flow controller */
+} dmacHw_FLOW_CONTROL_e;
+
+typedef enum {
+	dmacHw_TRANSFER_STATUS_BUSY,	/* DMA Transfer ongoing */
+	dmacHw_TRANSFER_STATUS_DONE,	/* DMA Transfer completed */
+	dmacHw_TRANSFER_STATUS_ERROR	/* DMA Transfer error */
+} dmacHw_TRANSFER_STATUS_e;
+
+typedef enum {
+	dmacHw_INTERRUPT_DISABLE,	/* Interrupt disable  */
+	dmacHw_INTERRUPT_ENABLE	/* Interrupt enable */
+} dmacHw_INTERRUPT_e;
+
+typedef enum {
+	dmacHw_INTERRUPT_STATUS_NONE = 0x0,	/* No DMA interrupt */
+	dmacHw_INTERRUPT_STATUS_TRANS = 0x1,	/* End of DMA transfer interrupt */
+	dmacHw_INTERRUPT_STATUS_BLOCK = 0x2,	/* End of block transfer interrupt */
+	dmacHw_INTERRUPT_STATUS_ERROR = 0x4	/* Error interrupt */
+} dmacHw_INTERRUPT_STATUS_e;
+
+typedef enum {
+	dmacHw_CONTROLLER_ATTRIB_CHANNEL_NUM,	/* Number of DMA channel */
+	dmacHw_CONTROLLER_ATTRIB_CHANNEL_MAX_BLOCK_SIZE,	/* Maximum channel burst size */
+	dmacHw_CONTROLLER_ATTRIB_MASTER_INTF_NUM,	/* Number of DMA master interface */
+	dmacHw_CONTROLLER_ATTRIB_CHANNEL_BUS_WIDTH,	/* Channel Data bus width */
+	dmacHw_CONTROLLER_ATTRIB_CHANNEL_FIFO_SIZE	/* Channel FIFO size */
+} dmacHw_CONTROLLER_ATTRIB_e;
+
+typedef unsigned long dmacHw_HANDLE_t;	/* DMA channel handle */
+typedef uint32_t dmacHw_ID_t;	/* DMA channel Id.  Must be created using
+				   "dmacHw_MAKE_CHANNEL_ID" macro
+				 */
+/* DMA channel configuration parameters */
+typedef struct {
+	uint32_t srcPeripheralPort;	/* Source peripheral port */
+	uint32_t dstPeripheralPort;	/* Destination peripheral port */
+	uint32_t srcStatusRegisterAddress;	/* Source status register address */
+	uint32_t dstStatusRegisterAddress;	/* Destination status register address of type  */
+
+	uint32_t srcGatherWidth;	/* Number of bytes gathered before successive gather opearation */
+	uint32_t srcGatherJump;	/* Number of bytes jumpped before successive gather opearation */
+	uint32_t dstScatterWidth;	/* Number of bytes sacattered before successive scatter opearation */
+	uint32_t dstScatterJump;	/* Number of bytes jumpped  before successive scatter opearation */
+	uint32_t maxDataPerBlock;	/* Maximum number of bytes to be transferred per block/descrptor.
+					   0 = Maximum possible.
+					 */
+
+	dmacHw_ADDRESS_UPDATE_MODE_e srcUpdate;	/* Source address update mode */
+	dmacHw_ADDRESS_UPDATE_MODE_e dstUpdate;	/* Destination address update mode */
+	dmacHw_TRANSFER_TYPE_e transferType;	/* DMA transfer type  */
+	dmacHw_TRANSFER_MODE_e transferMode;	/* DMA transfer mode */
+	dmacHw_MASTER_INTERFACE_e srcMasterInterface;	/* DMA source interface  */
+	dmacHw_MASTER_INTERFACE_e dstMasterInterface;	/* DMA destination interface */
+	dmacHw_TRANSACTION_WIDTH_e srcMaxTransactionWidth;	/* Source transaction width   */
+	dmacHw_TRANSACTION_WIDTH_e dstMaxTransactionWidth;	/* Destination transaction width */
+	dmacHw_BURST_WIDTH_e srcMaxBurstWidth;	/* Source burst width */
+	dmacHw_BURST_WIDTH_e dstMaxBurstWidth;	/* Destination burst width */
+	dmacHw_INTERRUPT_e blockTransferInterrupt;	/* Block trsnafer interrupt */
+	dmacHw_INTERRUPT_e completeTransferInterrupt;	/* Complete DMA trsnafer interrupt */
+	dmacHw_INTERRUPT_e errorInterrupt;	/* Error interrupt */
+	dmacHw_CHANNEL_PRIORITY_e channelPriority;	/* Channel priority */
+	dmacHw_FLOW_CONTROL_e flowControler;	/* Data flow controller */
+} dmacHw_CONFIG_t;
+
+/****************************************************************************/
+/**
+*  @brief   Initializes DMA
+*
+*  This function initializes DMA CSP driver
+*
+*  @note
+*     Must be called before using any DMA channel
+*/
+/****************************************************************************/
+void dmacHw_initDma(void);
+
+/****************************************************************************/
+/**
+*  @brief   Exit function for  DMA
+*
+*  This function isolates DMA from the system
+*
+*/
+/****************************************************************************/
+void dmacHw_exitDma(void);
+
+/****************************************************************************/
+/**
+*  @brief   Gets a handle to a DMA channel
+*
+*  This function returns a handle, representing a control block of a particular DMA channel
+*
+*  @return  -1       - On Failure
+*            handle  - On Success, representing a channel control block
+*
+*  @note
+*     None  Channel ID must be created using "dmacHw_MAKE_CHANNEL_ID" macro
+*/
+/****************************************************************************/
+dmacHw_HANDLE_t dmacHw_getChannelHandle(dmacHw_ID_t channelId	/* [ IN ] DMA Channel Id */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Initializes a DMA channel for use
+*
+*  This function initializes and resets a DMA channel for use
+*
+*  @return  -1     - On Failure
+*            0     - On Success
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+int dmacHw_initChannel(dmacHw_HANDLE_t handle	/*  [ IN ] DMA Channel handle  */
+    );
+
+/****************************************************************************/
+/**
+*  @brief  Estimates number of descriptor needed to perform certain DMA transfer
+*
+*
+*  @return  On failure : -1
+*           On success : Number of descriptor count
+*
+*
+*/
+/****************************************************************************/
+int dmacHw_calculateDescriptorCount(dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configuration settings */
+				    void *pSrcAddr,	/*   [ IN ] Source (Peripheral/Memory) address */
+				    void *pDstAddr,	/*   [ IN ] Destination (Peripheral/Memory) address */
+				    size_t dataLen	/*   [ IN ] Data length in bytes */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Initializes descriptor ring
+*
+*  This function will initializes the descriptor ring of a DMA channel
+*
+*
+*  @return   -1 - On failure
+*             0 - On success
+*  @note
+*     - "len" parameter should be obtained from "dmacHw_descriptorLen"
+*     - Descriptor buffer MUST be 32 bit aligned and uncached as it
+*       is accessed by ARM and DMA
+*/
+/****************************************************************************/
+int dmacHw_initDescriptor(void *pDescriptorVirt,	/*  [ IN ] Virtual address of uncahced buffer allocated to form descriptor ring */
+			  uint32_t descriptorPhyAddr,	/*  [ IN ] Physical address of pDescriptorVirt (descriptor buffer) */
+			  uint32_t len,	/*  [ IN ] Size of the pBuf */
+			  uint32_t num	/*  [ IN ] Number of descriptor in the ring */
+    );
+
+/****************************************************************************/
+/**
+*  @brief  Finds amount of memory required to form a descriptor ring
+*
+*
+*  @return   Number of bytes required to form a descriptor ring
+*
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+uint32_t dmacHw_descriptorLen(uint32_t descCnt	/*  [ IN ] Number of descriptor in the ring */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Configure DMA channel
+*
+*  @return  0  : On success
+*           -1 : On failure
+*/
+/****************************************************************************/
+int dmacHw_configChannel(dmacHw_HANDLE_t handle,	/*  [ IN ] DMA Channel handle  */
+			 dmacHw_CONFIG_t *pConfig	/*   [ IN ] Configuration settings */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Set descriptors for known data length
+*
+*  When DMA has to work as a flow controller, this function prepares the
+*  descriptor chain to transfer data
+*
+*  from:
+*          - Memory to memory
+*          - Peripheral to memory
+*          - Memory to Peripheral
+*          - Peripheral to Peripheral
+*
+*  @return   -1 - On failure
+*             0 - On success
+*
+*/
+/****************************************************************************/
+int dmacHw_setDataDescriptor(dmacHw_CONFIG_t *pConfig,	/*  [ IN ] Configuration settings */
+			     void *pDescriptor,	/*  [ IN ] Descriptor buffer  */
+			     void *pSrcAddr,	/*  [ IN ] Source (Peripheral/Memory) address */
+			     void *pDstAddr,	/*  [ IN ] Destination (Peripheral/Memory) address */
+			     size_t dataLen	/*  [ IN ] Length in bytes   */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Indicates whether DMA transfer is in progress or completed
+*
+*  @return   DMA transfer status
+*          dmacHw_TRANSFER_STATUS_BUSY:         DMA Transfer ongoing
+*          dmacHw_TRANSFER_STATUS_DONE:         DMA Transfer completed
+*          dmacHw_TRANSFER_STATUS_ERROR:        DMA Transfer error
+*
+*/
+/****************************************************************************/
+dmacHw_TRANSFER_STATUS_e dmacHw_transferCompleted(dmacHw_HANDLE_t handle	/*   [ IN ] DMA Channel handle  */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Set descriptor carrying control information
+*
+*  This function will be used to send specific control information to the device
+*  using the DMA channel
+*
+*
+*  @return  -1 - On failure
+*            0 - On success
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+int dmacHw_setControlDescriptor(dmacHw_CONFIG_t *pConfig,	/*  [ IN ] Configuration settings */
+				void *pDescriptor,	/*  [ IN ] Descriptor buffer  */
+				uint32_t ctlAddress,	/*  [ IN ] Address of the device control register  */
+				uint32_t control	/*  [ IN ] Device control information */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Read data DMA transferred to memory
+*
+*  This function will read data that has been DMAed to memory while transfering from:
+*          - Memory to memory
+*          - Peripheral to memory
+*
+*  @return  0 - No more data is available to read
+*           1 - More data might be available to read
+*
+*/
+/****************************************************************************/
+int dmacHw_readTransferredData(dmacHw_HANDLE_t handle,	/*  [ IN ] DMA Channel handle    */
+			       dmacHw_CONFIG_t *pConfig,	/*  [ IN ]  Configuration settings */
+			       void *pDescriptor,	/*  [ IN ] Descriptor buffer  */
+			       void **ppBbuf,	/*  [ OUT ] Data received */
+			       size_t *pLlen	/*  [ OUT ] Length of the data received */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Prepares descriptor ring, when source peripheral working as a flow controller
+*
+*  This function will form the descriptor ring by allocating buffers, when source peripheral
+*  has to work as a flow controller to transfer data from:
+*           - Peripheral to memory.
+*
+*  @return  -1 - On failure
+*            0 - On success
+*
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+int dmacHw_setVariableDataDescriptor(dmacHw_HANDLE_t handle,	/*  [ IN ] DMA Channel handle   */
+				     dmacHw_CONFIG_t *pConfig,	/*  [ IN ] Configuration settings */
+				     void *pDescriptor,	/*  [ IN ] Descriptor buffer  */
+				     uint32_t srcAddr,	/*  [ IN ] Source peripheral address */
+				     void *(*fpAlloc) (int len),	/*  [ IN ] Function pointer  that provides destination memory */
+				     int len,	/*  [ IN ] Number of bytes "fpAlloc" will allocate for destination */
+				     int num	/*  [ IN ] Number of descriptor to set */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Program channel register to initiate transfer
+*
+*  @return  void
+*
+*
+*  @note
+*     - Descriptor buffer MUST ALWAYS be flushed before calling this function
+*     - This function should also be called from ISR to program the channel with
+*       pending descriptors
+*/
+/****************************************************************************/
+void dmacHw_initiateTransfer(dmacHw_HANDLE_t handle,	/*   [ IN ] DMA Channel handle */
+			     dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configuration settings */
+			     void *pDescriptor	/*   [ IN ] Descriptor buffer  */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Resets descriptor control information
+*
+*  @return  void
+*/
+/****************************************************************************/
+void dmacHw_resetDescriptorControl(void *pDescriptor	/*   [ IN ] Descriptor buffer  */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Program channel register to stop transfer
+*
+*  Ensures the channel is not doing any transfer after calling this function
+*
+*  @return  void
+*
+*/
+/****************************************************************************/
+void dmacHw_stopTransfer(dmacHw_HANDLE_t handle	/*   [ IN ] DMA Channel handle */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Check the existance of pending descriptor
+*
+*  This function confirmes if there is any pending descriptor in the chain
+*  to program the channel
+*
+*  @return  1 : Channel need to be programmed with pending descriptor
+*           0 : No more pending descriptor to programe the channel
+*
+*  @note
+*     - This function should be called from ISR in case there are pending
+*       descriptor to program the channel.
+*
+*     Example:
+*
+*     dmac_isr ()
+*     {
+*         ...
+*         if (dmacHw_descriptorPending (handle))
+*         {
+*            dmacHw_initiateTransfer (handle);
+*         }
+*     }
+*
+*/
+/****************************************************************************/
+uint32_t dmacHw_descriptorPending(dmacHw_HANDLE_t handle,	/*   [ IN ] DMA Channel handle */
+				  void *pDescriptor	/*   [ IN ] Descriptor buffer */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Deallocates source or destination memory, allocated
+*
+*  This function can be called to deallocate data memory that was DMAed successfully
+*
+*  @return  -1  - On failure
+*            0  - On success
+*
+*  @note
+*     This function will be called ONLY, when source OR destination address is pointing
+*     to dynamic memory
+*/
+/****************************************************************************/
+int dmacHw_freeMem(dmacHw_CONFIG_t *pConfig,	/*  [ IN ] Configuration settings */
+		   void *pDescriptor,	/*  [ IN ] Descriptor buffer  */
+		   void (*fpFree) (void *)	/*  [ IN ] Function pointer to free data memory */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Clears the interrupt
+*
+*  This function clears the DMA channel specific interrupt
+*
+*  @return   N/A
+*
+*  @note
+*     Must be called under the context of ISR
+*/
+/****************************************************************************/
+void dmacHw_clearInterrupt(dmacHw_HANDLE_t handle	/*  [ IN ] DMA Channel handle  */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Returns the cause of channel specific DMA interrupt
+*
+*  This function returns the cause of interrupt
+*
+*  @return  Interrupt status, each bit representing a specific type of interrupt
+*           of type dmacHw_INTERRUPT_STATUS_e
+*  @note
+*           This function should be called under the context of ISR
+*/
+/****************************************************************************/
+dmacHw_INTERRUPT_STATUS_e dmacHw_getInterruptStatus(dmacHw_HANDLE_t handle	/*  [ IN ] DMA Channel handle  */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Indentifies a DMA channel causing interrupt
+*
+*  This functions returns a channel causing interrupt of type dmacHw_INTERRUPT_STATUS_e
+*
+*  @return  NULL   : No channel causing DMA interrupt
+*           ! NULL : Handle to a channel causing DMA interrupt
+*  @note
+*     dmacHw_clearInterrupt() must be called with a valid handle after calling this function
+*/
+/****************************************************************************/
+dmacHw_HANDLE_t dmacHw_getInterruptSource(void);
+
+/****************************************************************************/
+/**
+*  @brief   Sets channel specific user data
+*
+*  This function associates user data to a specif DMA channel
+*
+*/
+/****************************************************************************/
+void dmacHw_setChannelUserData(dmacHw_HANDLE_t handle,	/*  [ IN ] DMA Channel handle  */
+			       void *userData	/*  [ IN ] User data  */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Gets channel specific user data
+*
+*  This function returns user data specific to a DMA channel
+*
+*  @return   user data
+*/
+/****************************************************************************/
+void *dmacHw_getChannelUserData(dmacHw_HANDLE_t handle	/*  [ IN ] DMA Channel handle  */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Displays channel specific registers and other control parameters
+*
+*
+*  @return  void
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+void dmacHw_printDebugInfo(dmacHw_HANDLE_t handle,	/*  [ IN ] DMA Channel handle  */
+			   void *pDescriptor,	/*  [ IN ] Descriptor buffer  */
+			   int (*fpPrint) (const char *, ...)	/*  [ IN ] Print callback function */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Provides DMA controller attributes
+*
+*
+*  @return  DMA controller attributes
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+uint32_t dmacHw_getDmaControllerAttribute(dmacHw_HANDLE_t handle,	/*  [ IN ]  DMA Channel handle  */
+					  dmacHw_CONTROLLER_ATTRIB_e attr	/*  [ IN ]  DMA Controler attribute of type  dmacHw_CONTROLLER_ATTRIB_e */
+    );
+
+#endif /* _DMACHW_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h
new file mode 100644
index 00000000000..375066ad018
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h
@@ -0,0 +1,145 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    dmacHw_priv.h
+*
+*  @brief   Private Definitions for low level DMA driver
+*
+*/
+/****************************************************************************/
+
+#ifndef _DMACHW_PRIV_H
+#define _DMACHW_PRIV_H
+
+#include <csp/stdint.h>
+
+/* Data type for DMA Link List Item */
+typedef struct {
+	uint32_t sar;		/* Source Adress Register.
+				   Address must be aligned to CTLx.SRC_TR_WIDTH.             */
+	uint32_t dar;		/* Destination Address Register.
+				   Address must be aligned to CTLx.DST_TR_WIDTH.             */
+	uint32_t llpPhy;	/* LLP contains the physical address of the next descriptor for block chaining using linked lists.
+				   Address MUST be aligned to a 32-bit boundary.             */
+	dmacHw_REG64_t ctl;	/* Control Register. 64 bits */
+	uint32_t sstat;		/* Source Status Register */
+	uint32_t dstat;		/* Destination Status Register */
+	uint32_t devCtl;	/* Device specific control information */
+	uint32_t llp;		/* LLP contains the virtual address of the next descriptor for block chaining using linked lists. */
+} dmacHw_DESC_t;
+
+/*
+ *  Descriptor ring pointers
+ */
+typedef struct {
+	int num;		/* Number of link items */
+	dmacHw_DESC_t *pHead;	/* Head of descriptor ring (for writing) */
+	dmacHw_DESC_t *pTail;	/* Tail of descriptor ring (for reading) */
+	dmacHw_DESC_t *pProg;	/* Descriptor to program the channel (for programming the channel register) */
+	dmacHw_DESC_t *pEnd;	/* End of current descriptor chain */
+	dmacHw_DESC_t *pFree;	/* Descriptor to free memory (freeing dynamic memory) */
+	uint32_t virt2PhyOffset;	/* Virtual to physical address offset for the descriptor ring */
+} dmacHw_DESC_RING_t;
+
+/*
+ *  DMA channel control block
+ */
+typedef struct {
+	uint32_t module;	/* DMA controller module (0-1) */
+	uint32_t channel;	/* DMA channel (0-7) */
+	volatile uint32_t varDataStarted;	/* Flag indicating variable data channel is enabled */
+	volatile uint32_t descUpdated;	/* Flag to indicate descriptor update is complete */
+	void *userData;		/* Channel specifc user data */
+} dmacHw_CBLK_t;
+
+#define dmacHw_ASSERT(a)                  if (!(a)) while (1)
+#define dmacHw_MAX_CHANNEL_COUNT          16
+#define dmacHw_FREE_USER_MEMORY           0xFFFFFFFF
+#define dmacHw_DESC_FREE                  dmacHw_REG_CTL_DONE
+#define dmacHw_DESC_INIT                  ((dmacHw_DESC_t *) 0xFFFFFFFF)
+#define dmacHw_MAX_BLOCKSIZE              4064
+#define dmacHw_GET_DESC_RING(addr)        (dmacHw_DESC_RING_t *)(addr)
+#define dmacHw_ADDRESS_MASK(byte)         ((byte) - 1)
+#define dmacHw_NEXT_DESC(rp, dp)           ((rp)->dp = (dmacHw_DESC_t *)(rp)->dp->llp)
+#define dmacHw_HANDLE_TO_CBLK(handle)     ((dmacHw_CBLK_t *) (handle))
+#define dmacHw_CBLK_TO_HANDLE(cblkp)      ((dmacHw_HANDLE_t) (cblkp))
+#define dmacHw_DST_IS_MEMORY(tt)          (((tt) ==  dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM) || ((tt) == dmacHw_TRANSFER_TYPE_MEM_TO_MEM)) ? 1 : 0
+
+/****************************************************************************/
+/**
+*  @brief   Get next available transaction width
+*
+*
+*  @return  On sucess  : Next avail able transaction width
+*           On failure : dmacHw_TRANSACTION_WIDTH_8
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+static inline dmacHw_TRANSACTION_WIDTH_e dmacHw_GetNextTrWidth(dmacHw_TRANSACTION_WIDTH_e tw	/*   [ IN ] Current transaction width */
+    ) {
+	if (tw & dmacHw_REG_CTL_SRC_TR_WIDTH_MASK) {
+		return ((tw >> dmacHw_REG_CTL_SRC_TR_WIDTH_SHIFT) -
+			 1) << dmacHw_REG_CTL_SRC_TR_WIDTH_SHIFT;
+	} else if (tw & dmacHw_REG_CTL_DST_TR_WIDTH_MASK) {
+		return ((tw >> dmacHw_REG_CTL_DST_TR_WIDTH_SHIFT) -
+			 1) << dmacHw_REG_CTL_DST_TR_WIDTH_SHIFT;
+	}
+
+	/* Default return  */
+	return dmacHw_SRC_TRANSACTION_WIDTH_8;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Get number of bytes per transaction
+*
+*  @return  Number of bytes per transaction
+*
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+static inline int dmacHw_GetTrWidthInBytes(dmacHw_TRANSACTION_WIDTH_e tw	/*   [ IN ]  Transaction width */
+    ) {
+	int width = 1;
+	switch (tw) {
+	case dmacHw_SRC_TRANSACTION_WIDTH_8:
+		width = 1;
+		break;
+	case dmacHw_SRC_TRANSACTION_WIDTH_16:
+	case dmacHw_DST_TRANSACTION_WIDTH_16:
+		width = 2;
+		break;
+	case dmacHw_SRC_TRANSACTION_WIDTH_32:
+	case dmacHw_DST_TRANSACTION_WIDTH_32:
+		width = 4;
+		break;
+	case dmacHw_SRC_TRANSACTION_WIDTH_64:
+	case dmacHw_DST_TRANSACTION_WIDTH_64:
+		width = 8;
+		break;
+	default:
+		dmacHw_ASSERT(0);
+	}
+
+	/* Default transaction width */
+	return width;
+}
+
+#endif /* _DMACHW_PRIV_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h
new file mode 100644
index 00000000000..891cea87e33
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h
@@ -0,0 +1,406 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    dmacHw_reg.h
+*
+*  @brief   Definitions for low level DMA registers
+*
+*/
+/****************************************************************************/
+
+#ifndef _DMACHW_REG_H
+#define _DMACHW_REG_H
+
+#include <csp/stdint.h>
+#include <mach/csp/mm_io.h>
+
+/* Data type for 64 bit little endian register */
+typedef struct {
+	volatile uint32_t lo;	/* Lower 32 bit in little endian mode */
+	volatile uint32_t hi;	/* Upper 32 bit in little endian mode */
+} dmacHw_REG64_t;
+
+/* Data type representing DMA channel registers */
+typedef struct {
+	dmacHw_REG64_t ChannelSar;	/*  Source Adress Register. 64 bits (upper 32 bits are reserved)
+					   Address must be aligned to CTLx.SRC_TR_WIDTH.
+					 */
+	dmacHw_REG64_t ChannelDar;	/*  Destination Address Register.64 bits (upper 32 bits are reserved)
+					   Address must be aligned to CTLx.DST_TR_WIDTH.
+					 */
+	dmacHw_REG64_t ChannelLlp;	/*  Link List Pointer.64 bits (upper 32 bits are reserved)
+					   LLP contains the pointer to the next LLI for block chaining using linked lists.
+					   If LLPis set to 0x0, then transfers using linked lists are not enabled.
+					   Address MUST be aligned to a 32-bit boundary.
+					 */
+	dmacHw_REG64_t ChannelCtl;	/* Control Register. 64 bits */
+	dmacHw_REG64_t ChannelSstat;	/* Source Status Register */
+	dmacHw_REG64_t ChannelDstat;	/* Destination Status Register */
+	dmacHw_REG64_t ChannelSstatAddr;	/* Source Status Address Register */
+	dmacHw_REG64_t ChannelDstatAddr;	/* Destination Status Address Register */
+	dmacHw_REG64_t ChannelConfig;	/* Channel Configuration Register */
+	dmacHw_REG64_t SrcGather;	/* Source gather register */
+	dmacHw_REG64_t DstScatter;	/* Destination scatter register */
+} dmacHw_CH_REG_t;
+
+/* Data type for RAW interrupt status registers */
+typedef struct {
+	dmacHw_REG64_t RawTfr;	/* Raw Status for IntTfr Interrupt */
+	dmacHw_REG64_t RawBlock;	/* Raw Status for IntBlock Interrupt */
+	dmacHw_REG64_t RawSrcTran;	/* Raw Status for IntSrcTran Interrupt */
+	dmacHw_REG64_t RawDstTran;	/* Raw Status for IntDstTran Interrupt */
+	dmacHw_REG64_t RawErr;	/* Raw Status for IntErr Interrupt */
+} dmacHw_INT_RAW_t;
+
+/* Data type for interrupt status registers */
+typedef struct {
+	dmacHw_REG64_t StatusTfr;	/* Status for IntTfr Interrupt */
+	dmacHw_REG64_t StatusBlock;	/* Status for IntBlock Interrupt */
+	dmacHw_REG64_t StatusSrcTran;	/* Status for IntSrcTran Interrupt */
+	dmacHw_REG64_t StatusDstTran;	/* Status for IntDstTran Interrupt */
+	dmacHw_REG64_t StatusErr;	/* Status for IntErr Interrupt */
+} dmacHw_INT_STATUS_t;
+
+/* Data type for interrupt mask registers*/
+typedef struct {
+	dmacHw_REG64_t MaskTfr;	/* Mask for IntTfr Interrupt */
+	dmacHw_REG64_t MaskBlock;	/* Mask for IntBlock Interrupt */
+	dmacHw_REG64_t MaskSrcTran;	/* Mask for IntSrcTran Interrupt */
+	dmacHw_REG64_t MaskDstTran;	/* Mask for IntDstTran Interrupt */
+	dmacHw_REG64_t MaskErr;	/* Mask for IntErr Interrupt */
+} dmacHw_INT_MASK_t;
+
+/* Data type for interrupt clear registers */
+typedef struct {
+	dmacHw_REG64_t ClearTfr;	/* Clear for IntTfr Interrupt */
+	dmacHw_REG64_t ClearBlock;	/* Clear for IntBlock Interrupt */
+	dmacHw_REG64_t ClearSrcTran;	/* Clear for IntSrcTran Interrupt */
+	dmacHw_REG64_t ClearDstTran;	/* Clear for IntDstTran Interrupt */
+	dmacHw_REG64_t ClearErr;	/* Clear for IntErr Interrupt */
+	dmacHw_REG64_t StatusInt;	/* Status for each interrupt type */
+} dmacHw_INT_CLEAR_t;
+
+/* Data type for software handshaking registers */
+typedef struct {
+	dmacHw_REG64_t ReqSrcReg;	/* Source Software Transaction Request Register */
+	dmacHw_REG64_t ReqDstReg;	/* Destination Software Transaction Request Register */
+	dmacHw_REG64_t SglReqSrcReg;	/* Single Source Transaction Request Register */
+	dmacHw_REG64_t SglReqDstReg;	/* Single Destination Transaction Request Register */
+	dmacHw_REG64_t LstSrcReg;	/* Last Source Transaction Request Register */
+	dmacHw_REG64_t LstDstReg;	/* Last Destination Transaction Request Register */
+} dmacHw_SW_HANDSHAKE_t;
+
+/* Data type for misc. registers */
+typedef struct {
+	dmacHw_REG64_t DmaCfgReg;	/* DMA Configuration Register */
+	dmacHw_REG64_t ChEnReg;	/* DMA Channel Enable Register */
+	dmacHw_REG64_t DmaIdReg;	/* DMA ID Register */
+	dmacHw_REG64_t DmaTestReg;	/* DMA Test Register */
+	dmacHw_REG64_t Reserved0;	/* Reserved */
+	dmacHw_REG64_t Reserved1;	/* Reserved */
+	dmacHw_REG64_t CompParm6;	/* Component Parameter 6 */
+	dmacHw_REG64_t CompParm5;	/* Component Parameter 5 */
+	dmacHw_REG64_t CompParm4;	/* Component Parameter 4 */
+	dmacHw_REG64_t CompParm3;	/* Component Parameter 3 */
+	dmacHw_REG64_t CompParm2;	/* Component Parameter 2 */
+	dmacHw_REG64_t CompParm1;	/* Component Parameter 1 */
+	dmacHw_REG64_t CompId;	/* Compoent ID */
+} dmacHw_MISC_t;
+
+/* Base registers */
+#define dmacHw_0_MODULE_BASE_ADDR        (char *) MM_IO_BASE_DMA0	/* DMAC 0 module's base address */
+#define dmacHw_1_MODULE_BASE_ADDR        (char *) MM_IO_BASE_DMA1	/* DMAC 1 module's base address */
+
+extern uint32_t dmaChannelCount_0;
+extern uint32_t dmaChannelCount_1;
+
+/* Define channel specific registers */
+#define dmacHw_CHAN_BASE(module, chan)          ((dmacHw_CH_REG_t *) ((char *)((module) ? dmacHw_1_MODULE_BASE_ADDR : dmacHw_0_MODULE_BASE_ADDR) + ((chan) * sizeof(dmacHw_CH_REG_t))))
+
+/* Raw interrupt status registers */
+#define dmacHw_REG_INT_RAW_BASE(module)         ((char *)dmacHw_CHAN_BASE((module), ((module) ? dmaChannelCount_1 : dmaChannelCount_0)))
+#define dmacHw_REG_INT_RAW_TRAN(module)         (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawTfr.lo)
+#define dmacHw_REG_INT_RAW_BLOCK(module)        (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawBlock.lo)
+#define dmacHw_REG_INT_RAW_STRAN(module)        (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawSrcTran.lo)
+#define dmacHw_REG_INT_RAW_DTRAN(module)        (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawDstTran.lo)
+#define dmacHw_REG_INT_RAW_ERROR(module)        (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawErr.lo)
+
+/* Interrupt status registers */
+#define dmacHw_REG_INT_STAT_BASE(module)        ((char *)(dmacHw_REG_INT_RAW_BASE((module)) + sizeof(dmacHw_INT_RAW_t)))
+#define dmacHw_REG_INT_STAT_TRAN(module)        (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusTfr.lo)
+#define dmacHw_REG_INT_STAT_BLOCK(module)       (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusBlock.lo)
+#define dmacHw_REG_INT_STAT_STRAN(module)       (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusSrcTran.lo)
+#define dmacHw_REG_INT_STAT_DTRAN(module)       (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusDstTran.lo)
+#define dmacHw_REG_INT_STAT_ERROR(module)       (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusErr.lo)
+
+/* Interrupt status registers */
+#define dmacHw_REG_INT_MASK_BASE(module)        ((char *)(dmacHw_REG_INT_STAT_BASE((module)) + sizeof(dmacHw_INT_STATUS_t)))
+#define dmacHw_REG_INT_MASK_TRAN(module)        (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskTfr.lo)
+#define dmacHw_REG_INT_MASK_BLOCK(module)       (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskBlock.lo)
+#define dmacHw_REG_INT_MASK_STRAN(module)       (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskSrcTran.lo)
+#define dmacHw_REG_INT_MASK_DTRAN(module)       (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskDstTran.lo)
+#define dmacHw_REG_INT_MASK_ERROR(module)       (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskErr.lo)
+
+/* Interrupt clear registers */
+#define dmacHw_REG_INT_CLEAR_BASE(module)       ((char *)(dmacHw_REG_INT_MASK_BASE((module)) + sizeof(dmacHw_INT_MASK_t)))
+#define dmacHw_REG_INT_CLEAR_TRAN(module)       (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearTfr.lo)
+#define dmacHw_REG_INT_CLEAR_BLOCK(module)      (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearBlock.lo)
+#define dmacHw_REG_INT_CLEAR_STRAN(module)      (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearSrcTran.lo)
+#define dmacHw_REG_INT_CLEAR_DTRAN(module)      (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearDstTran.lo)
+#define dmacHw_REG_INT_CLEAR_ERROR(module)      (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearErr.lo)
+#define dmacHw_REG_INT_STATUS(module)           (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->StatusInt.lo)
+
+/* Software handshaking registers */
+#define dmacHw_REG_SW_HS_BASE(module)           ((char *)(dmacHw_REG_INT_CLEAR_BASE((module)) + sizeof(dmacHw_INT_CLEAR_t)))
+#define dmacHw_REG_SW_HS_SRC_REQ(module)        (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->ReqSrcReg.lo)
+#define dmacHw_REG_SW_HS_DST_REQ(module)        (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->ReqDstReg.lo)
+#define dmacHw_REG_SW_HS_SRC_SGL_REQ(module)    (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->SglReqSrcReg.lo)
+#define dmacHw_REG_SW_HS_DST_SGL_REQ(module)    (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->SglReqDstReg.lo)
+#define dmacHw_REG_SW_HS_SRC_LST_REQ(module)    (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->LstSrcReg.lo)
+#define dmacHw_REG_SW_HS_DST_LST_REQ(module)    (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->LstDstReg.lo)
+
+/* Miscellaneous registers */
+#define dmacHw_REG_MISC_BASE(module)            ((char *)(dmacHw_REG_SW_HS_BASE((module)) + sizeof(dmacHw_SW_HANDSHAKE_t)))
+#define dmacHw_REG_MISC_CFG(module)             (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->DmaCfgReg.lo)
+#define dmacHw_REG_MISC_CH_ENABLE(module)       (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->ChEnReg.lo)
+#define dmacHw_REG_MISC_ID(module)              (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->DmaIdReg.lo)
+#define dmacHw_REG_MISC_TEST(module)            (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->DmaTestReg.lo)
+#define dmacHw_REG_MISC_COMP_PARAM1_LO(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm1.lo)
+#define dmacHw_REG_MISC_COMP_PARAM1_HI(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm1.hi)
+#define dmacHw_REG_MISC_COMP_PARAM2_LO(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm2.lo)
+#define dmacHw_REG_MISC_COMP_PARAM2_HI(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm2.hi)
+#define dmacHw_REG_MISC_COMP_PARAM3_LO(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm3.lo)
+#define dmacHw_REG_MISC_COMP_PARAM3_HI(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm3.hi)
+#define dmacHw_REG_MISC_COMP_PARAM4_LO(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm4.lo)
+#define dmacHw_REG_MISC_COMP_PARAM4_HI(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm4.hi)
+#define dmacHw_REG_MISC_COMP_PARAM5_LO(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm5.lo)
+#define dmacHw_REG_MISC_COMP_PARAM5_HI(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm5.hi)
+#define dmacHw_REG_MISC_COMP_PARAM6_LO(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm6.lo)
+#define dmacHw_REG_MISC_COMP_PARAM6_HI(module)  (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm6.hi)
+
+/* Channel control registers */
+#define dmacHw_REG_SAR(module, chan)            (dmacHw_CHAN_BASE((module), (chan))->ChannelSar.lo)
+#define dmacHw_REG_DAR(module, chan)            (dmacHw_CHAN_BASE((module), (chan))->ChannelDar.lo)
+#define dmacHw_REG_LLP(module, chan)            (dmacHw_CHAN_BASE((module), (chan))->ChannelLlp.lo)
+
+#define dmacHw_REG_CTL_LO(module, chan)         (dmacHw_CHAN_BASE((module), (chan))->ChannelCtl.lo)
+#define dmacHw_REG_CTL_HI(module, chan)         (dmacHw_CHAN_BASE((module), (chan))->ChannelCtl.hi)
+
+#define dmacHw_REG_SSTAT(module, chan)          (dmacHw_CHAN_BASE((module), (chan))->ChannelSstat.lo)
+#define dmacHw_REG_DSTAT(module, chan)          (dmacHw_CHAN_BASE((module), (chan))->ChannelDstat.lo)
+#define dmacHw_REG_SSTATAR(module, chan)        (dmacHw_CHAN_BASE((module), (chan))->ChannelSstatAddr.lo)
+#define dmacHw_REG_DSTATAR(module, chan)        (dmacHw_CHAN_BASE((module), (chan))->ChannelDstatAddr.lo)
+
+#define dmacHw_REG_CFG_LO(module, chan)         (dmacHw_CHAN_BASE((module), (chan))->ChannelConfig.lo)
+#define dmacHw_REG_CFG_HI(module, chan)         (dmacHw_CHAN_BASE((module), (chan))->ChannelConfig.hi)
+
+#define dmacHw_REG_SGR_LO(module, chan)         (dmacHw_CHAN_BASE((module), (chan))->SrcGather.lo)
+#define dmacHw_REG_SGR_HI(module, chan)         (dmacHw_CHAN_BASE((module), (chan))->SrcGather.hi)
+
+#define dmacHw_REG_DSR_LO(module, chan)         (dmacHw_CHAN_BASE((module), (chan))->DstScatter.lo)
+#define dmacHw_REG_DSR_HI(module, chan)         (dmacHw_CHAN_BASE((module), (chan))->DstScatter.hi)
+
+#define INT_STATUS_MASK(channel)                (0x00000001 << (channel))
+#define CHANNEL_BUSY(mod, channel)              (dmacHw_REG_MISC_CH_ENABLE((mod)) & (0x00000001 << (channel)))
+
+/* Bit mask for REG_DMACx_CTL_LO */
+
+#define dmacHw_REG_CTL_INT_EN                       0x00000001	/* Channel interrupt enable */
+
+#define dmacHw_REG_CTL_DST_TR_WIDTH_MASK            0x0000000E	/* Destination transaction width mask */
+#define dmacHw_REG_CTL_DST_TR_WIDTH_SHIFT           1
+#define dmacHw_REG_CTL_DST_TR_WIDTH_8               0x00000000	/* Destination transaction width 8 bit */
+#define dmacHw_REG_CTL_DST_TR_WIDTH_16              0x00000002	/* Destination transaction width 16 bit */
+#define dmacHw_REG_CTL_DST_TR_WIDTH_32              0x00000004	/* Destination transaction width 32 bit */
+#define dmacHw_REG_CTL_DST_TR_WIDTH_64              0x00000006	/* Destination transaction width 64 bit */
+
+#define dmacHw_REG_CTL_SRC_TR_WIDTH_MASK            0x00000070	/* Source transaction width mask */
+#define dmacHw_REG_CTL_SRC_TR_WIDTH_SHIFT           4
+#define dmacHw_REG_CTL_SRC_TR_WIDTH_8               0x00000000	/* Source transaction width 8 bit */
+#define dmacHw_REG_CTL_SRC_TR_WIDTH_16              0x00000010	/* Source transaction width 16 bit */
+#define dmacHw_REG_CTL_SRC_TR_WIDTH_32              0x00000020	/* Source transaction width 32 bit */
+#define dmacHw_REG_CTL_SRC_TR_WIDTH_64              0x00000030	/* Source transaction width 64 bit */
+
+#define dmacHw_REG_CTL_DS_ENABLE                    0x00040000	/* Destination scatter enable */
+#define dmacHw_REG_CTL_SG_ENABLE                    0x00020000	/* Source gather enable */
+
+#define dmacHw_REG_CTL_DINC_MASK                    0x00000180	/* Destination address inc/dec mask */
+#define dmacHw_REG_CTL_DINC_INC                     0x00000000	/* Destination address increment */
+#define dmacHw_REG_CTL_DINC_DEC                     0x00000080	/* Destination address decrement */
+#define dmacHw_REG_CTL_DINC_NC                      0x00000100	/* Destination address no change */
+
+#define dmacHw_REG_CTL_SINC_MASK                    0x00000600	/* Source address inc/dec mask */
+#define dmacHw_REG_CTL_SINC_INC                     0x00000000	/* Source address increment */
+#define dmacHw_REG_CTL_SINC_DEC                     0x00000200	/* Source address decrement */
+#define dmacHw_REG_CTL_SINC_NC                      0x00000400	/* Source address no change */
+
+#define dmacHw_REG_CTL_DST_MSIZE_MASK               0x00003800	/* Destination burst transaction length */
+#define dmacHw_REG_CTL_DST_MSIZE_0                  0x00000000	/* No Destination burst */
+#define dmacHw_REG_CTL_DST_MSIZE_4                  0x00000800	/* Destination burst transaction length 4 */
+#define dmacHw_REG_CTL_DST_MSIZE_8                  0x00001000	/* Destination burst transaction length 8 */
+#define dmacHw_REG_CTL_DST_MSIZE_16                 0x00001800	/* Destination burst transaction length 16 */
+
+#define dmacHw_REG_CTL_SRC_MSIZE_MASK               0x0001C000	/* Source burst transaction length */
+#define dmacHw_REG_CTL_SRC_MSIZE_0                  0x00000000	/* No Source burst */
+#define dmacHw_REG_CTL_SRC_MSIZE_4                  0x00004000	/* Source burst transaction length 4 */
+#define dmacHw_REG_CTL_SRC_MSIZE_8                  0x00008000	/* Source burst transaction length 8 */
+#define dmacHw_REG_CTL_SRC_MSIZE_16                 0x0000C000	/* Source burst transaction length 16 */
+
+#define dmacHw_REG_CTL_TTFC_MASK                    0x00700000	/* Transfer type and flow controller */
+#define dmacHw_REG_CTL_TTFC_MM_DMAC                 0x00000000	/* Memory to Memory with DMAC as flow controller */
+#define dmacHw_REG_CTL_TTFC_MP_DMAC                 0x00100000	/* Memory to Peripheral with DMAC as flow controller */
+#define dmacHw_REG_CTL_TTFC_PM_DMAC                 0x00200000	/* Peripheral to Memory with DMAC as flow controller */
+#define dmacHw_REG_CTL_TTFC_PP_DMAC                 0x00300000	/* Peripheral to Peripheral with DMAC as flow controller */
+#define dmacHw_REG_CTL_TTFC_PM_PERI                 0x00400000	/* Peripheral to Memory with Peripheral as flow controller */
+#define dmacHw_REG_CTL_TTFC_PP_SPERI                0x00500000	/* Peripheral to Peripheral with Source Peripheral as flow controller */
+#define dmacHw_REG_CTL_TTFC_MP_PERI                 0x00600000	/* Memory to Peripheral with Peripheral as flow controller */
+#define dmacHw_REG_CTL_TTFC_PP_DPERI                0x00700000	/* Peripheral to Peripheral with Destination Peripheral as flow controller */
+
+#define dmacHw_REG_CTL_DMS_MASK                     0x01800000	/* Destination AHB master interface */
+#define dmacHw_REG_CTL_DMS_1                        0x00000000	/* Destination AHB master interface 1 */
+#define dmacHw_REG_CTL_DMS_2                        0x00800000	/* Destination AHB master interface 2 */
+
+#define dmacHw_REG_CTL_SMS_MASK                     0x06000000	/* Source AHB master interface */
+#define dmacHw_REG_CTL_SMS_1                        0x00000000	/* Source AHB master interface 1 */
+#define dmacHw_REG_CTL_SMS_2                        0x02000000	/* Source AHB master interface 2 */
+
+#define dmacHw_REG_CTL_LLP_DST_EN                   0x08000000	/* Block chaining enable for destination side */
+#define dmacHw_REG_CTL_LLP_SRC_EN                   0x10000000	/* Block chaining enable for source side */
+
+/* Bit mask for REG_DMACx_CTL_HI */
+#define dmacHw_REG_CTL_BLOCK_TS_MASK                0x00000FFF	/* Block transfer size */
+#define dmacHw_REG_CTL_DONE                         0x00001000	/* Block trasnfer done */
+
+/* Bit mask for REG_DMACx_CFG_LO */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_SHIFT                  5	/* Channel priority shift */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_MASK          0x000000E0	/* Channel priority mask */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_0             0x00000000	/* Channel priority 0 */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_1             0x00000020	/* Channel priority 1 */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_2             0x00000040	/* Channel priority 2 */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_3             0x00000060	/* Channel priority 3 */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_4             0x00000080	/* Channel priority 4 */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_5             0x000000A0	/* Channel priority 5 */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_6             0x000000C0	/* Channel priority 6 */
+#define dmacHw_REG_CFG_LO_CH_PRIORITY_7             0x000000E0	/* Channel priority 7 */
+
+#define dmacHw_REG_CFG_LO_CH_SUSPEND                0x00000100	/* Channel suspend */
+#define dmacHw_REG_CFG_LO_CH_FIFO_EMPTY             0x00000200	/* Channel FIFO empty */
+#define dmacHw_REG_CFG_LO_DST_CH_SW_HS              0x00000400	/* Destination channel SW handshaking */
+#define dmacHw_REG_CFG_LO_SRC_CH_SW_HS              0x00000800	/* Source channel SW handshaking */
+
+#define dmacHw_REG_CFG_LO_CH_LOCK_MASK              0x00003000	/* Channel locking mask */
+#define dmacHw_REG_CFG_LO_CH_LOCK_DMA               0x00000000	/* Channel lock over the entire DMA transfer operation */
+#define dmacHw_REG_CFG_LO_CH_LOCK_BLOCK             0x00001000	/* Channel lock over the block transfer operation */
+#define dmacHw_REG_CFG_LO_CH_LOCK_TRANS             0x00002000	/* Channel lock over the transaction */
+#define dmacHw_REG_CFG_LO_CH_LOCK_ENABLE            0x00010000	/* Channel lock enable */
+
+#define dmacHw_REG_CFG_LO_BUS_LOCK_MASK             0x0000C000	/* Bus locking mask */
+#define dmacHw_REG_CFG_LO_BUS_LOCK_DMA              0x00000000	/* Bus lock over the entire DMA transfer operation */
+#define dmacHw_REG_CFG_LO_BUS_LOCK_BLOCK            0x00004000	/* Bus lock over the block transfer operation */
+#define dmacHw_REG_CFG_LO_BUS_LOCK_TRANS            0x00008000	/* Bus lock over the transaction */
+#define dmacHw_REG_CFG_LO_BUS_LOCK_ENABLE           0x00020000	/* Bus lock enable */
+
+#define dmacHw_REG_CFG_LO_DST_HS_POLARITY_LOW       0x00040000	/* Destination channel handshaking signal polarity low */
+#define dmacHw_REG_CFG_LO_SRC_HS_POLARITY_LOW       0x00080000	/* Source channel handshaking signal polarity low */
+
+#define dmacHw_REG_CFG_LO_MAX_AMBA_BURST_LEN_MASK   0x3FF00000	/* Maximum AMBA burst length */
+
+#define dmacHw_REG_CFG_LO_AUTO_RELOAD_SRC           0x40000000	/* Source address auto reload */
+#define dmacHw_REG_CFG_LO_AUTO_RELOAD_DST           0x80000000	/* Destination address auto reload */
+
+/* Bit mask for REG_DMACx_CFG_HI */
+#define dmacHw_REG_CFG_HI_FC_DST_READY              0x00000001	/* Source transaction request is serviced when destination is ready */
+#define dmacHw_REG_CFG_HI_FIFO_ENOUGH               0x00000002	/* Initiate burst transaction when enough data in available in FIFO */
+
+#define dmacHw_REG_CFG_HI_AHB_HPROT_MASK            0x0000001C	/* AHB protection mask */
+#define dmacHw_REG_CFG_HI_AHB_HPROT_1               0x00000004	/* AHB protection 1 */
+#define dmacHw_REG_CFG_HI_AHB_HPROT_2               0x00000008	/* AHB protection 2 */
+#define dmacHw_REG_CFG_HI_AHB_HPROT_3               0x00000010	/* AHB protection 3 */
+
+#define dmacHw_REG_CFG_HI_UPDATE_DST_STAT           0x00000020	/* Destination status update enable */
+#define dmacHw_REG_CFG_HI_UPDATE_SRC_STAT           0x00000040	/* Source status update enable */
+
+#define dmacHw_REG_CFG_HI_SRC_PERI_INTF_MASK        0x00000780	/* Source peripheral hardware interface mask */
+#define dmacHw_REG_CFG_HI_DST_PERI_INTF_MASK        0x00007800	/* Destination peripheral hardware interface mask */
+
+/* DMA Configuration Parameters */
+#define dmacHw_REG_COMP_PARAM_NUM_CHANNELS          0x00000700	/* Number of channels */
+#define dmacHw_REG_COMP_PARAM_NUM_INTERFACE         0x00001800	/* Number of master interface */
+#define dmacHw_REG_COMP_PARAM_MAX_BLK_SIZE          0x0000000f	/* Maximum brust size */
+#define dmacHw_REG_COMP_PARAM_DATA_WIDTH            0x00006000	/* Data transfer width */
+
+/* Define GET/SET macros to program the registers */
+#define dmacHw_SET_SAR(module, channel, addr)          (dmacHw_REG_SAR((module), (channel)) = (uint32_t) (addr))
+#define dmacHw_SET_DAR(module, channel, addr)          (dmacHw_REG_DAR((module), (channel)) = (uint32_t) (addr))
+#define dmacHw_SET_LLP(module, channel, ptr)           (dmacHw_REG_LLP((module), (channel)) = (uint32_t) (ptr))
+
+#define dmacHw_GET_SSTAT(module, channel)              (dmacHw_REG_SSTAT((module), (channel)))
+#define dmacHw_GET_DSTAT(module, channel)              (dmacHw_REG_DSTAT((module), (channel)))
+
+#define dmacHw_SET_SSTATAR(module, channel, addr)      (dmacHw_REG_SSTATAR((module), (channel)) = (uint32_t) (addr))
+#define dmacHw_SET_DSTATAR(module, channel, addr)      (dmacHw_REG_DSTATAR((module), (channel)) = (uint32_t) (addr))
+
+#define dmacHw_SET_CONTROL_LO(module, channel, ctl)    (dmacHw_REG_CTL_LO((module), (channel)) |= (ctl))
+#define dmacHw_RESET_CONTROL_LO(module, channel)       (dmacHw_REG_CTL_LO((module), (channel)) = 0)
+#define dmacHw_GET_CONTROL_LO(module, channel)         (dmacHw_REG_CTL_LO((module), (channel)))
+
+#define dmacHw_SET_CONTROL_HI(module, channel, ctl)    (dmacHw_REG_CTL_HI((module), (channel)) |= (ctl))
+#define dmacHw_RESET_CONTROL_HI(module, channel)       (dmacHw_REG_CTL_HI((module), (channel)) = 0)
+#define dmacHw_GET_CONTROL_HI(module, channel)         (dmacHw_REG_CTL_HI((module), (channel)))
+
+#define dmacHw_GET_BLOCK_SIZE(module, channel)         (dmacHw_REG_CTL_HI((module), (channel)) & dmacHw_REG_CTL_BLOCK_TS_MASK)
+#define dmacHw_DMA_COMPLETE(module, channel)           (dmacHw_REG_CTL_HI((module), (channel)) & dmacHw_REG_CTL_DONE)
+
+#define dmacHw_SET_CONFIG_LO(module, channel, cfg)     (dmacHw_REG_CFG_LO((module), (channel)) |= (cfg))
+#define dmacHw_RESET_CONFIG_LO(module, channel)        (dmacHw_REG_CFG_LO((module), (channel)) = 0)
+#define dmacHw_GET_CONFIG_LO(module, channel)          (dmacHw_REG_CFG_LO((module), (channel)))
+#define dmacHw_SET_AMBA_BUSRT_LEN(module, channel, len)    (dmacHw_REG_CFG_LO((module), (channel)) = (dmacHw_REG_CFG_LO((module), (channel)) & ~(dmacHw_REG_CFG_LO_MAX_AMBA_BURST_LEN_MASK)) | (((len) << 20) & dmacHw_REG_CFG_LO_MAX_AMBA_BURST_LEN_MASK))
+#define dmacHw_SET_CHANNEL_PRIORITY(module, channel, prio) (dmacHw_REG_CFG_LO((module), (channel)) = (dmacHw_REG_CFG_LO((module), (channel)) & ~(dmacHw_REG_CFG_LO_CH_PRIORITY_MASK)) | (prio))
+#define dmacHw_SET_AHB_HPROT(module, channel, protect)  (dmacHw_REG_CFG_HI(module, channel) = (dmacHw_REG_CFG_HI((module), (channel)) & ~(dmacHw_REG_CFG_HI_AHB_HPROT_MASK)) | (protect))
+
+#define dmacHw_SET_CONFIG_HI(module, channel, cfg)      (dmacHw_REG_CFG_HI((module), (channel)) |= (cfg))
+#define dmacHw_RESET_CONFIG_HI(module, channel)         (dmacHw_REG_CFG_HI((module), (channel)) = 0)
+#define dmacHw_GET_CONFIG_HI(module, channel)           (dmacHw_REG_CFG_HI((module), (channel)))
+#define dmacHw_SET_SRC_PERI_INTF(module, channel, intf) (dmacHw_REG_CFG_HI((module), (channel)) = (dmacHw_REG_CFG_HI((module), (channel)) & ~(dmacHw_REG_CFG_HI_SRC_PERI_INTF_MASK)) | (((intf) << 7) & dmacHw_REG_CFG_HI_SRC_PERI_INTF_MASK))
+#define dmacHw_SRC_PERI_INTF(intf)                      (((intf) << 7) & dmacHw_REG_CFG_HI_SRC_PERI_INTF_MASK)
+#define dmacHw_SET_DST_PERI_INTF(module, channel, intf) (dmacHw_REG_CFG_HI((module), (channel)) = (dmacHw_REG_CFG_HI((module), (channel)) & ~(dmacHw_REG_CFG_HI_DST_PERI_INTF_MASK)) | (((intf) << 11) & dmacHw_REG_CFG_HI_DST_PERI_INTF_MASK))
+#define dmacHw_DST_PERI_INTF(intf)                      (((intf) << 11) & dmacHw_REG_CFG_HI_DST_PERI_INTF_MASK)
+
+#define dmacHw_DMA_START(module, channel)              (dmacHw_REG_MISC_CH_ENABLE((module)) = (0x00000001 << ((channel) + 8)) | (0x00000001 << (channel)))
+#define dmacHw_DMA_STOP(module, channel)               (dmacHw_REG_MISC_CH_ENABLE((module)) = (0x00000001 << ((channel) + 8)))
+#define dmacHw_DMA_ENABLE(module)                      (dmacHw_REG_MISC_CFG((module)) = 1)
+#define dmacHw_DMA_DISABLE(module)                     (dmacHw_REG_MISC_CFG((module)) = 0)
+
+#define dmacHw_TRAN_INT_ENABLE(module, channel)        (dmacHw_REG_INT_MASK_TRAN((module)) = (0x00000001 << ((channel) + 8)) | (0x00000001 << (channel)))
+#define dmacHw_BLOCK_INT_ENABLE(module, channel)       (dmacHw_REG_INT_MASK_BLOCK((module)) = (0x00000001 << ((channel) + 8)) | (0x00000001 << (channel)))
+#define dmacHw_ERROR_INT_ENABLE(module, channel)       (dmacHw_REG_INT_MASK_ERROR((module)) = (0x00000001 << ((channel) + 8)) | (0x00000001 << (channel)))
+
+#define dmacHw_TRAN_INT_DISABLE(module, channel)       (dmacHw_REG_INT_MASK_TRAN((module)) = (0x00000001 << ((channel) + 8)))
+#define dmacHw_BLOCK_INT_DISABLE(module, channel)      (dmacHw_REG_INT_MASK_BLOCK((module)) = (0x00000001 << ((channel) + 8)))
+#define dmacHw_ERROR_INT_DISABLE(module, channel)      (dmacHw_REG_INT_MASK_ERROR((module)) = (0x00000001 << ((channel) + 8)))
+#define dmacHw_STRAN_INT_DISABLE(module, channel)      (dmacHw_REG_INT_MASK_STRAN((module)) = (0x00000001 << ((channel) + 8)))
+#define dmacHw_DTRAN_INT_DISABLE(module, channel)      (dmacHw_REG_INT_MASK_DTRAN((module)) = (0x00000001 << ((channel) + 8)))
+
+#define dmacHw_TRAN_INT_CLEAR(module, channel)         (dmacHw_REG_INT_CLEAR_TRAN((module)) = (0x00000001 << (channel)))
+#define dmacHw_BLOCK_INT_CLEAR(module, channel)        (dmacHw_REG_INT_CLEAR_BLOCK((module)) = (0x00000001 << (channel)))
+#define dmacHw_ERROR_INT_CLEAR(module, channel)        (dmacHw_REG_INT_CLEAR_ERROR((module)) = (0x00000001 << (channel)))
+
+#define dmacHw_GET_NUM_CHANNEL(module)                 (((dmacHw_REG_MISC_COMP_PARAM1_HI((module)) & dmacHw_REG_COMP_PARAM_NUM_CHANNELS) >> 8) + 1)
+#define dmacHw_GET_NUM_INTERFACE(module)               (((dmacHw_REG_MISC_COMP_PARAM1_HI((module)) & dmacHw_REG_COMP_PARAM_NUM_INTERFACE) >> 11) + 1)
+#define dmacHw_GET_MAX_BLOCK_SIZE(module, channel)     ((dmacHw_REG_MISC_COMP_PARAM1_LO((module)) >> (4 * (channel))) & dmacHw_REG_COMP_PARAM_MAX_BLK_SIZE)
+#define dmacHw_GET_CHANNEL_DATA_WIDTH(module, channel) ((dmacHw_REG_MISC_COMP_PARAM1_HI((module)) & dmacHw_REG_COMP_PARAM_DATA_WIDTH) >> 13)
+
+#endif /* _DMACHW_REG_H */
-- 
cgit v1.2.3


From cf2ddacb567e85f40241f67b240fa445db7a424d Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Fri, 7 Aug 2009 20:08:00 +0100
Subject: ARM: 5659/1: bcmring: add csp dmac source files

add csp dmac source files

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-bcmring/csp/dmac/Makefile       |    1 +
 arch/arm/mach-bcmring/csp/dmac/dmacHw.c       |  917 ++++++++++++++++++++++
 arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c | 1017 +++++++++++++++++++++++++
 3 files changed, 1935 insertions(+)
 create mode 100644 arch/arm/mach-bcmring/csp/dmac/Makefile
 create mode 100644 arch/arm/mach-bcmring/csp/dmac/dmacHw.c
 create mode 100644 arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c

(limited to 'arch')

diff --git a/arch/arm/mach-bcmring/csp/dmac/Makefile b/arch/arm/mach-bcmring/csp/dmac/Makefile
new file mode 100644
index 00000000000..fb1104fe56b
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/dmac/Makefile
@@ -0,0 +1 @@
+obj-y += dmacHw.o dmacHw_extra.o
\ No newline at end of file
diff --git a/arch/arm/mach-bcmring/csp/dmac/dmacHw.c b/arch/arm/mach-bcmring/csp/dmac/dmacHw.c
new file mode 100644
index 00000000000..7b9bac2d79a
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/dmac/dmacHw.c
@@ -0,0 +1,917 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    dmacHw.c
+*
+*  @brief   Low level DMA controller driver routines
+*
+*  @note
+*
+*   These routines provide basic DMA functionality only.
+*/
+/****************************************************************************/
+
+/* ---- Include Files ---------------------------------------------------- */
+#include <csp/stdint.h>
+#include <csp/string.h>
+#include <stddef.h>
+
+#include <csp/dmacHw.h>
+#include <mach/csp/dmacHw_reg.h>
+#include <mach/csp/dmacHw_priv.h>
+#include <mach/csp/chipcHw_inline.h>
+
+/* ---- External Function Prototypes ------------------------------------- */
+
+/* Allocate DMA control blocks */
+dmacHw_CBLK_t dmacHw_gCblk[dmacHw_MAX_CHANNEL_COUNT];
+
+uint32_t dmaChannelCount_0 = dmacHw_MAX_CHANNEL_COUNT / 2;
+uint32_t dmaChannelCount_1 = dmacHw_MAX_CHANNEL_COUNT / 2;
+
+/****************************************************************************/
+/**
+*  @brief   Get maximum FIFO for a DMA channel
+*
+*  @return  Maximum allowable FIFO size
+*
+*
+*/
+/****************************************************************************/
+static uint32_t GetFifoSize(dmacHw_HANDLE_t handle	/*   [ IN ] DMA Channel handle */
+    ) {
+	uint32_t val = 0;
+	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+	dmacHw_MISC_t *pMiscReg =
+	    (dmacHw_MISC_t *) dmacHw_REG_MISC_BASE(pCblk->module);
+
+	switch (pCblk->channel) {
+	case 0:
+		val = (pMiscReg->CompParm2.lo & 0x70000000) >> 28;
+		break;
+	case 1:
+		val = (pMiscReg->CompParm3.hi & 0x70000000) >> 28;
+		break;
+	case 2:
+		val = (pMiscReg->CompParm3.lo & 0x70000000) >> 28;
+		break;
+	case 3:
+		val = (pMiscReg->CompParm4.hi & 0x70000000) >> 28;
+		break;
+	case 4:
+		val = (pMiscReg->CompParm4.lo & 0x70000000) >> 28;
+		break;
+	case 5:
+		val = (pMiscReg->CompParm5.hi & 0x70000000) >> 28;
+		break;
+	case 6:
+		val = (pMiscReg->CompParm5.lo & 0x70000000) >> 28;
+		break;
+	case 7:
+		val = (pMiscReg->CompParm6.hi & 0x70000000) >> 28;
+		break;
+	}
+
+	if (val <= 0x4) {
+		return 8 << val;
+	} else {
+		dmacHw_ASSERT(0);
+	}
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Program channel register to initiate transfer
+*
+*  @return  void
+*
+*
+*  @note
+*     - Descriptor buffer MUST ALWAYS be flushed before calling this function
+*     - This function should also be called from ISR to program the channel with
+*       pending descriptors
+*/
+/****************************************************************************/
+void dmacHw_initiateTransfer(dmacHw_HANDLE_t handle,	/*   [ IN ] DMA Channel handle */
+			     dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configuration settings */
+			     void *pDescriptor	/*   [ IN ] Descriptor buffer */
+    ) {
+	dmacHw_DESC_RING_t *pRing;
+	dmacHw_DESC_t *pProg;
+	dmacHw_CBLK_t *pCblk;
+
+	pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+	pRing = dmacHw_GET_DESC_RING(pDescriptor);
+
+	if (CHANNEL_BUSY(pCblk->module, pCblk->channel)) {
+		/* Not safe yet to program the channel */
+		return;
+	}
+
+	if (pCblk->varDataStarted) {
+		if (pCblk->descUpdated) {
+			pCblk->descUpdated = 0;
+			pProg =
+			    (dmacHw_DESC_t *) ((uint32_t)
+					       dmacHw_REG_LLP(pCblk->module,
+							      pCblk->channel) +
+					       pRing->virt2PhyOffset);
+
+			/* Load descriptor if not loaded */
+			if (!(pProg->ctl.hi & dmacHw_REG_CTL_DONE)) {
+				dmacHw_SET_SAR(pCblk->module, pCblk->channel,
+					       pProg->sar);
+				dmacHw_SET_DAR(pCblk->module, pCblk->channel,
+					       pProg->dar);
+				dmacHw_REG_CTL_LO(pCblk->module,
+						  pCblk->channel) =
+				    pProg->ctl.lo;
+				dmacHw_REG_CTL_HI(pCblk->module,
+						  pCblk->channel) =
+				    pProg->ctl.hi;
+			} else if (pProg == (dmacHw_DESC_t *) pRing->pEnd->llp) {
+				/* Return as end descriptor is processed */
+				return;
+			} else {
+				dmacHw_ASSERT(0);
+			}
+		} else {
+			return;
+		}
+	} else {
+		if (pConfig->transferMode == dmacHw_TRANSFER_MODE_PERIODIC) {
+			/* Do not make a single chain, rather process one descriptor at a time */
+			pProg = pRing->pHead;
+			/* Point to the next descriptor for next iteration */
+			dmacHw_NEXT_DESC(pRing, pHead);
+		} else {
+			/* Return if no more pending descriptor */
+			if (pRing->pEnd == NULL) {
+				return;
+			}
+
+			pProg = pRing->pProg;
+			if (pConfig->transferMode ==
+			    dmacHw_TRANSFER_MODE_CONTINUOUS) {
+				/* Make sure a complete ring can be formed */
+				dmacHw_ASSERT((dmacHw_DESC_t *) pRing->pEnd->
+					      llp == pRing->pProg);
+				/* Make sure pProg pointing to the pHead */
+				dmacHw_ASSERT((dmacHw_DESC_t *) pRing->pProg ==
+					      pRing->pHead);
+				/* Make a complete ring */
+				do {
+					pRing->pProg->ctl.lo |=
+					    (dmacHw_REG_CTL_LLP_DST_EN |
+					     dmacHw_REG_CTL_LLP_SRC_EN);
+					pRing->pProg =
+					    (dmacHw_DESC_t *) pRing->pProg->llp;
+				} while (pRing->pProg != pRing->pHead);
+			} else {
+				/* Make a single long chain */
+				while (pRing->pProg != pRing->pEnd) {
+					pRing->pProg->ctl.lo |=
+					    (dmacHw_REG_CTL_LLP_DST_EN |
+					     dmacHw_REG_CTL_LLP_SRC_EN);
+					pRing->pProg =
+					    (dmacHw_DESC_t *) pRing->pProg->llp;
+				}
+			}
+		}
+
+		/* Program the channel registers */
+		dmacHw_SET_SAR(pCblk->module, pCblk->channel, pProg->sar);
+		dmacHw_SET_DAR(pCblk->module, pCblk->channel, pProg->dar);
+		dmacHw_SET_LLP(pCblk->module, pCblk->channel,
+			       (uint32_t) pProg - pRing->virt2PhyOffset);
+		dmacHw_REG_CTL_LO(pCblk->module, pCblk->channel) =
+		    pProg->ctl.lo;
+		dmacHw_REG_CTL_HI(pCblk->module, pCblk->channel) =
+		    pProg->ctl.hi;
+		if (pRing->pEnd) {
+			/* Remember the descriptor to use next */
+			pRing->pProg = (dmacHw_DESC_t *) pRing->pEnd->llp;
+		}
+		/* Indicate no more pending descriptor  */
+		pRing->pEnd = (dmacHw_DESC_t *) NULL;
+	}
+	/* Start DMA operation */
+	dmacHw_DMA_START(pCblk->module, pCblk->channel);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Initializes DMA
+*
+*  This function initializes DMA CSP driver
+*
+*  @note
+*     Must be called before using any DMA channel
+*/
+/****************************************************************************/
+void dmacHw_initDma(void)
+{
+
+	uint32_t i = 0;
+
+	dmaChannelCount_0 = dmacHw_GET_NUM_CHANNEL(0);
+	dmaChannelCount_1 = dmacHw_GET_NUM_CHANNEL(1);
+
+	/* Enable access to the DMA block */
+	chipcHw_busInterfaceClockEnable(chipcHw_REG_BUS_CLOCK_DMAC0);
+	chipcHw_busInterfaceClockEnable(chipcHw_REG_BUS_CLOCK_DMAC1);
+
+	if ((dmaChannelCount_0 + dmaChannelCount_1) > dmacHw_MAX_CHANNEL_COUNT) {
+		dmacHw_ASSERT(0);
+	}
+
+	memset((void *)dmacHw_gCblk, 0,
+	       sizeof(dmacHw_CBLK_t) * (dmaChannelCount_0 + dmaChannelCount_1));
+	for (i = 0; i < dmaChannelCount_0; i++) {
+		dmacHw_gCblk[i].module = 0;
+		dmacHw_gCblk[i].channel = i;
+	}
+	for (i = 0; i < dmaChannelCount_1; i++) {
+		dmacHw_gCblk[i + dmaChannelCount_0].module = 1;
+		dmacHw_gCblk[i + dmaChannelCount_0].channel = i;
+	}
+}
+
+/****************************************************************************/
+/**
+*  @brief   Exit function for  DMA
+*
+*  This function isolates DMA from the system
+*
+*/
+/****************************************************************************/
+void dmacHw_exitDma(void)
+{
+	/* Disable access to the DMA block */
+	chipcHw_busInterfaceClockDisable(chipcHw_REG_BUS_CLOCK_DMAC0);
+	chipcHw_busInterfaceClockDisable(chipcHw_REG_BUS_CLOCK_DMAC1);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Gets a handle to a DMA channel
+*
+*  This function returns a handle, representing a control block of a particular DMA channel
+*
+*  @return  -1       - On Failure
+*            handle  - On Success, representing a channel control block
+*
+*  @note
+*     None  Channel ID must be created using "dmacHw_MAKE_CHANNEL_ID" macro
+*/
+/****************************************************************************/
+dmacHw_HANDLE_t dmacHw_getChannelHandle(dmacHw_ID_t channelId	/* [ IN ] DMA Channel Id */
+    ) {
+	int idx;
+
+	switch ((channelId >> 8)) {
+	case 0:
+		dmacHw_ASSERT((channelId & 0xff) < dmaChannelCount_0);
+		idx = (channelId & 0xff);
+		break;
+	case 1:
+		dmacHw_ASSERT((channelId & 0xff) < dmaChannelCount_1);
+		idx = dmaChannelCount_0 + (channelId & 0xff);
+		break;
+	default:
+		dmacHw_ASSERT(0);
+		return (dmacHw_HANDLE_t) -1;
+	}
+
+	return dmacHw_CBLK_TO_HANDLE(&dmacHw_gCblk[idx]);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Initializes a DMA channel for use
+*
+*  This function initializes and resets a DMA channel for use
+*
+*  @return  -1     - On Failure
+*            0     - On Success
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+int dmacHw_initChannel(dmacHw_HANDLE_t handle	/*   [ IN ] DMA Channel handle */
+    ) {
+	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+	int module = pCblk->module;
+	int channel = pCblk->channel;
+
+	/* Reinitialize the control block */
+	memset((void *)pCblk, 0, sizeof(dmacHw_CBLK_t));
+	pCblk->module = module;
+	pCblk->channel = channel;
+
+	/* Enable DMA controller */
+	dmacHw_DMA_ENABLE(pCblk->module);
+	/* Reset DMA channel */
+	dmacHw_RESET_CONTROL_LO(pCblk->module, pCblk->channel);
+	dmacHw_RESET_CONTROL_HI(pCblk->module, pCblk->channel);
+	dmacHw_RESET_CONFIG_LO(pCblk->module, pCblk->channel);
+	dmacHw_RESET_CONFIG_HI(pCblk->module, pCblk->channel);
+
+	/* Clear all raw interrupt status */
+	dmacHw_TRAN_INT_CLEAR(pCblk->module, pCblk->channel);
+	dmacHw_BLOCK_INT_CLEAR(pCblk->module, pCblk->channel);
+	dmacHw_ERROR_INT_CLEAR(pCblk->module, pCblk->channel);
+
+	/* Mask event specific interrupts */
+	dmacHw_TRAN_INT_DISABLE(pCblk->module, pCblk->channel);
+	dmacHw_BLOCK_INT_DISABLE(pCblk->module, pCblk->channel);
+	dmacHw_STRAN_INT_DISABLE(pCblk->module, pCblk->channel);
+	dmacHw_DTRAN_INT_DISABLE(pCblk->module, pCblk->channel);
+	dmacHw_ERROR_INT_DISABLE(pCblk->module, pCblk->channel);
+
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief  Finds amount of memory required to form a descriptor ring
+*
+*
+*  @return   Number of bytes required to form a descriptor ring
+*
+*
+*/
+/****************************************************************************/
+uint32_t dmacHw_descriptorLen(uint32_t descCnt	/* [ IN ] Number of descriptor in the ring */
+    ) {
+	/* Need extra 4 byte to ensure 32 bit alignment  */
+	return (descCnt * sizeof(dmacHw_DESC_t)) + sizeof(dmacHw_DESC_RING_t) +
+		sizeof(uint32_t);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Initializes descriptor ring
+*
+*  This function will initializes the descriptor ring of a DMA channel
+*
+*
+*  @return   -1 - On failure
+*             0 - On success
+*  @note
+*     - "len" parameter should be obtained from "dmacHw_descriptorLen"
+*     - Descriptor buffer MUST be 32 bit aligned and uncached as it is
+*       accessed by ARM and DMA
+*/
+/****************************************************************************/
+int dmacHw_initDescriptor(void *pDescriptorVirt,	/*  [ IN ] Virtual address of uncahced buffer allocated to form descriptor ring */
+			  uint32_t descriptorPhyAddr,	/*  [ IN ] Physical address of pDescriptorVirt (descriptor buffer) */
+			  uint32_t len,	/*  [ IN ] Size of the pBuf */
+			  uint32_t num	/*  [ IN ] Number of descriptor in the ring */
+    ) {
+	uint32_t i;
+	dmacHw_DESC_RING_t *pRing;
+	dmacHw_DESC_t *pDesc;
+
+	/* Check the alignment of the descriptor */
+	if ((uint32_t) pDescriptorVirt & 0x00000003) {
+		dmacHw_ASSERT(0);
+		return -1;
+	}
+
+	/* Check if enough space has been allocated for descriptor ring */
+	if (len < dmacHw_descriptorLen(num)) {
+		return -1;
+	}
+
+	pRing = dmacHw_GET_DESC_RING(pDescriptorVirt);
+	pRing->pHead =
+	    (dmacHw_DESC_t *) ((uint32_t) pRing + sizeof(dmacHw_DESC_RING_t));
+	pRing->pFree = pRing->pTail = pRing->pEnd = pRing->pHead;
+	pRing->pProg = dmacHw_DESC_INIT;
+	/* Initialize link item chain, starting from the head */
+	pDesc = pRing->pHead;
+	/* Find the offset between virtual to physical address */
+	pRing->virt2PhyOffset = (uint32_t) pDescriptorVirt - descriptorPhyAddr;
+
+	/* Form the descriptor ring */
+	for (i = 0; i < num - 1; i++) {
+		/* Clear link list item */
+		memset((void *)pDesc, 0, sizeof(dmacHw_DESC_t));
+		/* Point to the next item in the physical address */
+		pDesc->llpPhy = (uint32_t) (pDesc + 1) - pRing->virt2PhyOffset;
+		/* Point to the next item in the virtual address */
+		pDesc->llp = (uint32_t) (pDesc + 1);
+		/* Mark descriptor is ready to use */
+		pDesc->ctl.hi = dmacHw_DESC_FREE;
+		/* Look into next link list item */
+		pDesc++;
+	}
+
+	/* Clear last link list item */
+	memset((void *)pDesc, 0, sizeof(dmacHw_DESC_t));
+	/* Last item pointing to the first item in the
+	   physical address to complete the ring */
+	pDesc->llpPhy = (uint32_t) pRing->pHead - pRing->virt2PhyOffset;
+	/* Last item pointing to the first item in the
+	   virtual address to complete the ring
+	 */
+	pDesc->llp = (uint32_t) pRing->pHead;
+	/* Mark descriptor is ready to use */
+	pDesc->ctl.hi = dmacHw_DESC_FREE;
+	/* Set the number of descriptors in the ring */
+	pRing->num = num;
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Configure DMA channel
+*
+*  @return  0  : On success
+*           -1 : On failure
+*/
+/****************************************************************************/
+int dmacHw_configChannel(dmacHw_HANDLE_t handle,	/*   [ IN ] DMA Channel handle */
+			 dmacHw_CONFIG_t *pConfig	/*   [ IN ] Configuration settings */
+    ) {
+	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+	uint32_t cfgHigh = 0;
+	int srcTrSize;
+	int dstTrSize;
+
+	pCblk->varDataStarted = 0;
+	pCblk->userData = NULL;
+
+	/* Configure
+	   - Burst transaction when enough data in available in FIFO
+	   - AHB Access protection 1
+	   - Source and destination peripheral ports
+	 */
+	cfgHigh =
+	    dmacHw_REG_CFG_HI_FIFO_ENOUGH | dmacHw_REG_CFG_HI_AHB_HPROT_1 |
+	    dmacHw_SRC_PERI_INTF(pConfig->
+				 srcPeripheralPort) |
+	    dmacHw_DST_PERI_INTF(pConfig->dstPeripheralPort);
+	/* Set priority */
+	dmacHw_SET_CHANNEL_PRIORITY(pCblk->module, pCblk->channel,
+				    pConfig->channelPriority);
+
+	if (pConfig->dstStatusRegisterAddress != 0) {
+		/* Destination status update enable */
+		cfgHigh |= dmacHw_REG_CFG_HI_UPDATE_DST_STAT;
+		/* Configure status registers */
+		dmacHw_SET_DSTATAR(pCblk->module, pCblk->channel,
+				   pConfig->dstStatusRegisterAddress);
+	}
+
+	if (pConfig->srcStatusRegisterAddress != 0) {
+		/* Source status update enable */
+		cfgHigh |= dmacHw_REG_CFG_HI_UPDATE_SRC_STAT;
+		/* Source status update enable */
+		dmacHw_SET_SSTATAR(pCblk->module, pCblk->channel,
+				   pConfig->srcStatusRegisterAddress);
+	}
+	/* Configure the config high register */
+	dmacHw_GET_CONFIG_HI(pCblk->module, pCblk->channel) = cfgHigh;
+
+	/* Clear all raw interrupt status */
+	dmacHw_TRAN_INT_CLEAR(pCblk->module, pCblk->channel);
+	dmacHw_BLOCK_INT_CLEAR(pCblk->module, pCblk->channel);
+	dmacHw_ERROR_INT_CLEAR(pCblk->module, pCblk->channel);
+
+	/* Configure block interrupt */
+	if (pConfig->blockTransferInterrupt == dmacHw_INTERRUPT_ENABLE) {
+		dmacHw_BLOCK_INT_ENABLE(pCblk->module, pCblk->channel);
+	} else {
+		dmacHw_BLOCK_INT_DISABLE(pCblk->module, pCblk->channel);
+	}
+	/* Configure complete transfer interrupt */
+	if (pConfig->completeTransferInterrupt == dmacHw_INTERRUPT_ENABLE) {
+		dmacHw_TRAN_INT_ENABLE(pCblk->module, pCblk->channel);
+	} else {
+		dmacHw_TRAN_INT_DISABLE(pCblk->module, pCblk->channel);
+	}
+	/* Configure error interrupt */
+	if (pConfig->errorInterrupt == dmacHw_INTERRUPT_ENABLE) {
+		dmacHw_ERROR_INT_ENABLE(pCblk->module, pCblk->channel);
+	} else {
+		dmacHw_ERROR_INT_DISABLE(pCblk->module, pCblk->channel);
+	}
+	/* Configure gather register */
+	if (pConfig->srcGatherWidth) {
+		srcTrSize =
+		    dmacHw_GetTrWidthInBytes(pConfig->srcMaxTransactionWidth);
+		if (!
+		    ((pConfig->srcGatherWidth % srcTrSize)
+		     && (pConfig->srcGatherJump % srcTrSize))) {
+			dmacHw_REG_SGR_LO(pCblk->module, pCblk->channel) =
+			    ((pConfig->srcGatherWidth /
+			      srcTrSize) << 20) | (pConfig->srcGatherJump /
+						   srcTrSize);
+		} else {
+			return -1;
+		}
+	}
+	/* Configure scatter register */
+	if (pConfig->dstScatterWidth) {
+		dstTrSize =
+		    dmacHw_GetTrWidthInBytes(pConfig->dstMaxTransactionWidth);
+		if (!
+		    ((pConfig->dstScatterWidth % dstTrSize)
+		     && (pConfig->dstScatterJump % dstTrSize))) {
+			dmacHw_REG_DSR_LO(pCblk->module, pCblk->channel) =
+			    ((pConfig->dstScatterWidth /
+			      dstTrSize) << 20) | (pConfig->dstScatterJump /
+						   dstTrSize);
+		} else {
+			return -1;
+		}
+	}
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Indicates whether DMA transfer is in progress or completed
+*
+*  @return   DMA transfer status
+*          dmacHw_TRANSFER_STATUS_BUSY:         DMA Transfer ongoing
+*          dmacHw_TRANSFER_STATUS_DONE:         DMA Transfer completed
+*          dmacHw_TRANSFER_STATUS_ERROR:        DMA Transfer error
+*
+*/
+/****************************************************************************/
+dmacHw_TRANSFER_STATUS_e dmacHw_transferCompleted(dmacHw_HANDLE_t handle	/*   [ IN ] DMA Channel handle */
+    ) {
+	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+
+	if (CHANNEL_BUSY(pCblk->module, pCblk->channel)) {
+		return dmacHw_TRANSFER_STATUS_BUSY;
+	} else if (dmacHw_REG_INT_RAW_ERROR(pCblk->module) &
+		   (0x00000001 << pCblk->channel)) {
+		return dmacHw_TRANSFER_STATUS_ERROR;
+	}
+
+	return dmacHw_TRANSFER_STATUS_DONE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Set descriptors for known data length
+*
+*  When DMA has to work as a flow controller, this function prepares the
+*  descriptor chain to transfer data
+*
+*  from:
+*          - Memory to memory
+*          - Peripheral to memory
+*          - Memory to Peripheral
+*          - Peripheral to Peripheral
+*
+*  @return   -1 - On failure
+*             0 - On success
+*
+*/
+/****************************************************************************/
+int dmacHw_setDataDescriptor(dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configuration settings */
+			     void *pDescriptor,	/*   [ IN ] Descriptor buffer */
+			     void *pSrcAddr,	/*   [ IN ] Source (Peripheral/Memory) address */
+			     void *pDstAddr,	/*   [ IN ] Destination (Peripheral/Memory) address */
+			     size_t dataLen	/*   [ IN ] Data length in bytes */
+    ) {
+	dmacHw_TRANSACTION_WIDTH_e dstTrWidth;
+	dmacHw_TRANSACTION_WIDTH_e srcTrWidth;
+	dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
+	dmacHw_DESC_t *pStart;
+	dmacHw_DESC_t *pProg;
+	int srcTs = 0;
+	int blkTs = 0;
+	int oddSize = 0;
+	int descCount = 0;
+	int count = 0;
+	int dstTrSize = 0;
+	int srcTrSize = 0;
+	uint32_t maxBlockSize = dmacHw_MAX_BLOCKSIZE;
+
+	dstTrSize = dmacHw_GetTrWidthInBytes(pConfig->dstMaxTransactionWidth);
+	srcTrSize = dmacHw_GetTrWidthInBytes(pConfig->srcMaxTransactionWidth);
+
+	/* Skip Tx if buffer is NULL  or length is unknown */
+	if ((pSrcAddr == NULL) || (pDstAddr == NULL) || (dataLen == 0)) {
+		/* Do not initiate transfer */
+		return -1;
+	}
+
+	/* Ensure scatter and gather are transaction aligned */
+	if ((pConfig->srcGatherWidth % srcTrSize)
+	    || (pConfig->dstScatterWidth % dstTrSize)) {
+		return -2;
+	}
+
+	/*
+	   Background 1: DMAC can not perform DMA if source and destination addresses are
+	   not properly aligned with the channel's transaction width. So, for successful
+	   DMA transfer, transaction width must be set according to the alignment of the
+	   source and destination address.
+	 */
+
+	/* Adjust destination transaction width if destination address is not aligned properly */
+	dstTrWidth = pConfig->dstMaxTransactionWidth;
+	while (dmacHw_ADDRESS_MASK(dstTrSize) & (uint32_t) pDstAddr) {
+		dstTrWidth = dmacHw_GetNextTrWidth(dstTrWidth);
+		dstTrSize = dmacHw_GetTrWidthInBytes(dstTrWidth);
+	}
+
+	/* Adjust source transaction width if source address is not aligned properly */
+	srcTrWidth = pConfig->srcMaxTransactionWidth;
+	while (dmacHw_ADDRESS_MASK(srcTrSize) & (uint32_t) pSrcAddr) {
+		srcTrWidth = dmacHw_GetNextTrWidth(srcTrWidth);
+		srcTrSize = dmacHw_GetTrWidthInBytes(srcTrWidth);
+	}
+
+	/* Find the maximum transaction per descriptor */
+	if (pConfig->maxDataPerBlock
+	    && ((pConfig->maxDataPerBlock / srcTrSize) <
+		dmacHw_MAX_BLOCKSIZE)) {
+		maxBlockSize = pConfig->maxDataPerBlock / srcTrSize;
+	}
+
+	/* Find number of source transactions needed to complete the DMA transfer */
+	srcTs = dataLen / srcTrSize;
+	/* Find the odd number of bytes that need to be transferred as single byte transaction width */
+	if (srcTs && (dstTrSize > srcTrSize)) {
+		oddSize = dataLen % dstTrSize;
+		/* Adjust source transaction count due to "oddSize" */
+		srcTs = srcTs - (oddSize / srcTrSize);
+	} else {
+		oddSize = dataLen % srcTrSize;
+	}
+	/* Adjust "descCount" due to "oddSize" */
+	if (oddSize) {
+		descCount++;
+	}
+	/* Find the number of descriptor needed for total "srcTs" */
+	if (srcTs) {
+		descCount += ((srcTs - 1) / maxBlockSize) + 1;
+	}
+
+	/* Check the availability of "descCount" discriptors in the ring */
+	pProg = pRing->pHead;
+	for (count = 0; (descCount <= pRing->num) && (count < descCount);
+	     count++) {
+		if ((pProg->ctl.hi & dmacHw_DESC_FREE) == 0) {
+			/* Sufficient descriptors are not available */
+			return -3;
+		}
+		pProg = (dmacHw_DESC_t *) pProg->llp;
+	}
+
+	/* Remember the link list item to program the channel registers */
+	pStart = pProg = pRing->pHead;
+	/* Make a link list with "descCount(=count)" number of descriptors */
+	while (count) {
+		/* Reset channel control information */
+		pProg->ctl.lo = 0;
+		/* Enable source gather if configured */
+		if (pConfig->srcGatherWidth) {
+			pProg->ctl.lo |= dmacHw_REG_CTL_SG_ENABLE;
+		}
+		/* Enable destination scatter if configured */
+		if (pConfig->dstScatterWidth) {
+			pProg->ctl.lo |= dmacHw_REG_CTL_DS_ENABLE;
+		}
+		/* Set source and destination address */
+		pProg->sar = (uint32_t) pSrcAddr;
+		pProg->dar = (uint32_t) pDstAddr;
+		/* Use "devCtl" to mark that user memory need to be freed later if needed */
+		if (pProg == pRing->pHead) {
+			pProg->devCtl = dmacHw_FREE_USER_MEMORY;
+		} else {
+			pProg->devCtl = 0;
+		}
+
+		blkTs = srcTs;
+
+		/* Special treatmeant for last descriptor */
+		if (count == 1) {
+			/* Mark the last descriptor */
+			pProg->ctl.lo &=
+			    ~(dmacHw_REG_CTL_LLP_DST_EN |
+			      dmacHw_REG_CTL_LLP_SRC_EN);
+			/* Treatment for odd data bytes */
+			if (oddSize) {
+				/* Adjust for single byte transaction width */
+				switch (pConfig->transferType) {
+				case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM:
+					dstTrWidth =
+					    dmacHw_DST_TRANSACTION_WIDTH_8;
+					blkTs =
+					    (oddSize / srcTrSize) +
+					    ((oddSize % srcTrSize) ? 1 : 0);
+					break;
+				case dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL:
+					srcTrWidth =
+					    dmacHw_SRC_TRANSACTION_WIDTH_8;
+					blkTs = oddSize;
+					break;
+				case dmacHw_TRANSFER_TYPE_MEM_TO_MEM:
+					srcTrWidth =
+					    dmacHw_SRC_TRANSACTION_WIDTH_8;
+					dstTrWidth =
+					    dmacHw_DST_TRANSACTION_WIDTH_8;
+					blkTs = oddSize;
+					break;
+				case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_PERIPHERAL:
+					/* Do not adjust the transaction width  */
+					break;
+				}
+			} else {
+				srcTs -= blkTs;
+			}
+		} else {
+			if (srcTs / maxBlockSize) {
+				blkTs = maxBlockSize;
+			}
+			/* Remaining source transactions for next iteration */
+			srcTs -= blkTs;
+		}
+		/* Must have a valid source transactions */
+		dmacHw_ASSERT(blkTs > 0);
+		/* Set control information */
+		if (pConfig->flowControler == dmacHw_FLOW_CONTROL_DMA) {
+			pProg->ctl.lo |= pConfig->transferType |
+			    pConfig->srcUpdate |
+			    pConfig->dstUpdate |
+			    srcTrWidth |
+			    dstTrWidth |
+			    pConfig->srcMaxBurstWidth |
+			    pConfig->dstMaxBurstWidth |
+			    pConfig->srcMasterInterface |
+			    pConfig->dstMasterInterface | dmacHw_REG_CTL_INT_EN;
+		} else {
+			uint32_t transferType = 0;
+			switch (pConfig->transferType) {
+			case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM:
+				transferType = dmacHw_REG_CTL_TTFC_PM_PERI;
+				break;
+			case dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL:
+				transferType = dmacHw_REG_CTL_TTFC_MP_PERI;
+				break;
+			default:
+				dmacHw_ASSERT(0);
+			}
+			pProg->ctl.lo |= transferType |
+			    pConfig->srcUpdate |
+			    pConfig->dstUpdate |
+			    srcTrWidth |
+			    dstTrWidth |
+			    pConfig->srcMaxBurstWidth |
+			    pConfig->dstMaxBurstWidth |
+			    pConfig->srcMasterInterface |
+			    pConfig->dstMasterInterface | dmacHw_REG_CTL_INT_EN;
+		}
+
+		/* Set block transaction size */
+		pProg->ctl.hi = blkTs & dmacHw_REG_CTL_BLOCK_TS_MASK;
+		/* Look for next descriptor */
+		if (count > 1) {
+			/* Point to the next descriptor */
+			pProg = (dmacHw_DESC_t *) pProg->llp;
+
+			/* Update source and destination address for next iteration */
+			switch (pConfig->transferType) {
+			case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM:
+				if (pConfig->dstScatterWidth) {
+					pDstAddr =
+					    (char *)pDstAddr +
+					    blkTs * srcTrSize +
+					    (((blkTs * srcTrSize) /
+					      pConfig->dstScatterWidth) *
+					     pConfig->dstScatterJump);
+				} else {
+					pDstAddr =
+					    (char *)pDstAddr +
+					    blkTs * srcTrSize;
+				}
+				break;
+			case dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL:
+				if (pConfig->srcGatherWidth) {
+					pSrcAddr =
+					    (char *)pDstAddr +
+					    blkTs * srcTrSize +
+					    (((blkTs * srcTrSize) /
+					      pConfig->srcGatherWidth) *
+					     pConfig->srcGatherJump);
+				} else {
+					pSrcAddr =
+					    (char *)pSrcAddr +
+					    blkTs * srcTrSize;
+				}
+				break;
+			case dmacHw_TRANSFER_TYPE_MEM_TO_MEM:
+				if (pConfig->dstScatterWidth) {
+					pDstAddr =
+					    (char *)pDstAddr +
+					    blkTs * srcTrSize +
+					    (((blkTs * srcTrSize) /
+					      pConfig->dstScatterWidth) *
+					     pConfig->dstScatterJump);
+				} else {
+					pDstAddr =
+					    (char *)pDstAddr +
+					    blkTs * srcTrSize;
+				}
+
+				if (pConfig->srcGatherWidth) {
+					pSrcAddr =
+					    (char *)pDstAddr +
+					    blkTs * srcTrSize +
+					    (((blkTs * srcTrSize) /
+					      pConfig->srcGatherWidth) *
+					     pConfig->srcGatherJump);
+				} else {
+					pSrcAddr =
+					    (char *)pSrcAddr +
+					    blkTs * srcTrSize;
+				}
+				break;
+			case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_PERIPHERAL:
+				/* Do not adjust the address */
+				break;
+			default:
+				dmacHw_ASSERT(0);
+			}
+		} else {
+			/* At the end of transfer "srcTs" must be zero */
+			dmacHw_ASSERT(srcTs == 0);
+		}
+		count--;
+	}
+
+	/* Remember the descriptor to initialize the registers */
+	if (pRing->pProg == dmacHw_DESC_INIT) {
+		pRing->pProg = pStart;
+	}
+	/* Indicate that the descriptor is updated */
+	pRing->pEnd = pProg;
+	/* Head pointing to the next descriptor */
+	pRing->pHead = (dmacHw_DESC_t *) pProg->llp;
+	/* Update Tail pointer if destination is a peripheral,
+	   because no one is going to read from the pTail
+	 */
+	if (!dmacHw_DST_IS_MEMORY(pConfig->transferType)) {
+		pRing->pTail = pRing->pHead;
+	}
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Provides DMA controller attributes
+*
+*
+*  @return  DMA controller attributes
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+uint32_t dmacHw_getDmaControllerAttribute(dmacHw_HANDLE_t handle,	/*  [ IN ]  DMA Channel handle */
+					  dmacHw_CONTROLLER_ATTRIB_e attr	/*  [ IN ]  DMA Controler attribute of type  dmacHw_CONTROLLER_ATTRIB_e */
+    ) {
+	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+
+	switch (attr) {
+	case dmacHw_CONTROLLER_ATTRIB_CHANNEL_NUM:
+		return dmacHw_GET_NUM_CHANNEL(pCblk->module);
+	case dmacHw_CONTROLLER_ATTRIB_CHANNEL_MAX_BLOCK_SIZE:
+		return (1 <<
+			 (dmacHw_GET_MAX_BLOCK_SIZE
+			  (pCblk->module, pCblk->module) + 2)) - 8;
+	case dmacHw_CONTROLLER_ATTRIB_MASTER_INTF_NUM:
+		return dmacHw_GET_NUM_INTERFACE(pCblk->module);
+	case dmacHw_CONTROLLER_ATTRIB_CHANNEL_BUS_WIDTH:
+		return 32 << dmacHw_GET_CHANNEL_DATA_WIDTH(pCblk->module,
+							   pCblk->channel);
+	case dmacHw_CONTROLLER_ATTRIB_CHANNEL_FIFO_SIZE:
+		return GetFifoSize(handle);
+	}
+	dmacHw_ASSERT(0);
+	return 0;
+}
diff --git a/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c b/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c
new file mode 100644
index 00000000000..ff7b436d093
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c
@@ -0,0 +1,1017 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    dmacHw_extra.c
+*
+*  @brief   Extra Low level DMA controller driver routines
+*
+*  @note
+*
+*   These routines provide basic DMA functionality only.
+*/
+/****************************************************************************/
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <csp/stdint.h>
+#include <stddef.h>
+
+#include <csp/dmacHw.h>
+#include <mach/csp/dmacHw_reg.h>
+#include <mach/csp/dmacHw_priv.h>
+
+extern dmacHw_CBLK_t dmacHw_gCblk[dmacHw_MAX_CHANNEL_COUNT];	/* Declared in dmacHw.c */
+
+/* ---- External Function Prototypes ------------------------------------- */
+
+/* ---- Internal Use Function Prototypes --------------------------------- */
+/****************************************************************************/
+/**
+*  @brief   Overwrites data length in the descriptor
+*
+*  This function overwrites data length in the descriptor
+*
+*
+*  @return   void
+*
+*  @note
+*          This is only used for PCM channel
+*/
+/****************************************************************************/
+void dmacHw_setDataLength(dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configuration settings */
+			  void *pDescriptor,	/*   [ IN ] Descriptor buffer */
+			  size_t dataLen	/*   [ IN ] Data length in bytes */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Helper function to display DMA registers
+*
+*  @return  void
+*
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+static void DisplayRegisterContents(int module,	/*   [ IN ] DMA Controller unit  (0-1) */
+				    int channel,	/*   [ IN ] DMA Channel          (0-7) / -1(all) */
+				    int (*fpPrint) (const char *, ...)	/*   [ IN ] Callback to the print function */
+    ) {
+	int chan;
+
+	(*fpPrint) ("Displaying register content \n\n");
+	(*fpPrint) ("Module %d: Interrupt raw transfer              0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_RAW_TRAN(module)));
+	(*fpPrint) ("Module %d: Interrupt raw block                 0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_RAW_BLOCK(module)));
+	(*fpPrint) ("Module %d: Interrupt raw src transfer          0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_RAW_STRAN(module)));
+	(*fpPrint) ("Module %d: Interrupt raw dst transfer          0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_RAW_DTRAN(module)));
+	(*fpPrint) ("Module %d: Interrupt raw error                 0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_RAW_ERROR(module)));
+	(*fpPrint) ("--------------------------------------------------\n");
+	(*fpPrint) ("Module %d: Interrupt stat transfer             0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_STAT_TRAN(module)));
+	(*fpPrint) ("Module %d: Interrupt stat block                0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_STAT_BLOCK(module)));
+	(*fpPrint) ("Module %d: Interrupt stat src transfer         0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_STAT_STRAN(module)));
+	(*fpPrint) ("Module %d: Interrupt stat dst transfer         0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_STAT_DTRAN(module)));
+	(*fpPrint) ("Module %d: Interrupt stat error                0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_STAT_ERROR(module)));
+	(*fpPrint) ("--------------------------------------------------\n");
+	(*fpPrint) ("Module %d: Interrupt mask transfer             0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_MASK_TRAN(module)));
+	(*fpPrint) ("Module %d: Interrupt mask block                0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_MASK_BLOCK(module)));
+	(*fpPrint) ("Module %d: Interrupt mask src transfer         0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_MASK_STRAN(module)));
+	(*fpPrint) ("Module %d: Interrupt mask dst transfer         0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_MASK_DTRAN(module)));
+	(*fpPrint) ("Module %d: Interrupt mask error                0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_MASK_ERROR(module)));
+	(*fpPrint) ("--------------------------------------------------\n");
+	(*fpPrint) ("Module %d: Interrupt clear transfer            0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_CLEAR_TRAN(module)));
+	(*fpPrint) ("Module %d: Interrupt clear block               0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_CLEAR_BLOCK(module)));
+	(*fpPrint) ("Module %d: Interrupt clear src transfer        0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_CLEAR_STRAN(module)));
+	(*fpPrint) ("Module %d: Interrupt clear dst transfer        0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_CLEAR_DTRAN(module)));
+	(*fpPrint) ("Module %d: Interrupt clear error               0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_INT_CLEAR_ERROR(module)));
+	(*fpPrint) ("--------------------------------------------------\n");
+	(*fpPrint) ("Module %d: SW source req                       0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_SW_HS_SRC_REQ(module)));
+	(*fpPrint) ("Module %d: SW dest req                         0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_SW_HS_DST_REQ(module)));
+	(*fpPrint) ("Module %d: SW source signal                    0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_SW_HS_SRC_SGL_REQ(module)));
+	(*fpPrint) ("Module %d: SW dest signal                      0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_SW_HS_DST_SGL_REQ(module)));
+	(*fpPrint) ("Module %d: SW source last                      0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_SW_HS_SRC_LST_REQ(module)));
+	(*fpPrint) ("Module %d: SW dest last                        0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_SW_HS_DST_LST_REQ(module)));
+	(*fpPrint) ("--------------------------------------------------\n");
+	(*fpPrint) ("Module %d: misc config                         0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_MISC_CFG(module)));
+	(*fpPrint) ("Module %d: misc channel enable                 0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_MISC_CH_ENABLE(module)));
+	(*fpPrint) ("Module %d: misc ID                             0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_MISC_ID(module)));
+	(*fpPrint) ("Module %d: misc test                           0x%X\n",
+		    module, (uint32_t) (dmacHw_REG_MISC_TEST(module)));
+
+	if (channel == -1) {
+		for (chan = 0; chan < 8; chan++) {
+			(*fpPrint)
+			    ("--------------------------------------------------\n");
+			(*fpPrint)
+			    ("Module %d: Channel %d Source                   0x%X\n",
+			     module, chan,
+			     (uint32_t) (dmacHw_REG_SAR(module, chan)));
+			(*fpPrint)
+			    ("Module %d: Channel %d Destination              0x%X\n",
+			     module, chan,
+			     (uint32_t) (dmacHw_REG_DAR(module, chan)));
+			(*fpPrint)
+			    ("Module %d: Channel %d LLP                      0x%X\n",
+			     module, chan,
+			     (uint32_t) (dmacHw_REG_LLP(module, chan)));
+			(*fpPrint)
+			    ("Module %d: Channel %d Control (LO)             0x%X\n",
+			     module, chan,
+			     (uint32_t) (dmacHw_REG_CTL_LO(module, chan)));
+			(*fpPrint)
+			    ("Module %d: Channel %d Control (HI)             0x%X\n",
+			     module, chan,
+			     (uint32_t) (dmacHw_REG_CTL_HI(module, chan)));
+			(*fpPrint)
+			    ("Module %d: Channel %d Source Stats             0x%X\n",
+			     module, chan,
+			     (uint32_t) (dmacHw_REG_SSTAT(module, chan)));
+			(*fpPrint)
+			    ("Module %d: Channel %d Dest Stats               0x%X\n",
+			     module, chan,
+			     (uint32_t) (dmacHw_REG_DSTAT(module, chan)));
+			(*fpPrint)
+			    ("Module %d: Channel %d Source Stats Addr        0x%X\n",
+			     module, chan,
+			     (uint32_t) (dmacHw_REG_SSTATAR(module, chan)));
+			(*fpPrint)
+			    ("Module %d: Channel %d Dest Stats Addr          0x%X\n",
+			     module, chan,
+			     (uint32_t) (dmacHw_REG_DSTATAR(module, chan)));
+			(*fpPrint)
+			    ("Module %d: Channel %d Config (LO)              0x%X\n",
+			     module, chan,
+			     (uint32_t) (dmacHw_REG_CFG_LO(module, chan)));
+			(*fpPrint)
+			    ("Module %d: Channel %d Config (HI)              0x%X\n",
+			     module, chan,
+			     (uint32_t) (dmacHw_REG_CFG_HI(module, chan)));
+		}
+	} else {
+		chan = channel;
+		(*fpPrint)
+		    ("--------------------------------------------------\n");
+		(*fpPrint)
+		    ("Module %d: Channel %d Source                   0x%X\n",
+		     module, chan, (uint32_t) (dmacHw_REG_SAR(module, chan)));
+		(*fpPrint)
+		    ("Module %d: Channel %d Destination              0x%X\n",
+		     module, chan, (uint32_t) (dmacHw_REG_DAR(module, chan)));
+		(*fpPrint)
+		    ("Module %d: Channel %d LLP                      0x%X\n",
+		     module, chan, (uint32_t) (dmacHw_REG_LLP(module, chan)));
+		(*fpPrint)
+		    ("Module %d: Channel %d Control (LO)             0x%X\n",
+		     module, chan,
+		     (uint32_t) (dmacHw_REG_CTL_LO(module, chan)));
+		(*fpPrint)
+		    ("Module %d: Channel %d Control (HI)             0x%X\n",
+		     module, chan,
+		     (uint32_t) (dmacHw_REG_CTL_HI(module, chan)));
+		(*fpPrint)
+		    ("Module %d: Channel %d Source Stats             0x%X\n",
+		     module, chan, (uint32_t) (dmacHw_REG_SSTAT(module, chan)));
+		(*fpPrint)
+		    ("Module %d: Channel %d Dest Stats               0x%X\n",
+		     module, chan, (uint32_t) (dmacHw_REG_DSTAT(module, chan)));
+		(*fpPrint)
+		    ("Module %d: Channel %d Source Stats Addr        0x%X\n",
+		     module, chan,
+		     (uint32_t) (dmacHw_REG_SSTATAR(module, chan)));
+		(*fpPrint)
+		    ("Module %d: Channel %d Dest Stats Addr          0x%X\n",
+		     module, chan,
+		     (uint32_t) (dmacHw_REG_DSTATAR(module, chan)));
+		(*fpPrint)
+		    ("Module %d: Channel %d Config (LO)              0x%X\n",
+		     module, chan,
+		     (uint32_t) (dmacHw_REG_CFG_LO(module, chan)));
+		(*fpPrint)
+		    ("Module %d: Channel %d Config (HI)              0x%X\n",
+		     module, chan,
+		     (uint32_t) (dmacHw_REG_CFG_HI(module, chan)));
+	}
+}
+
+/****************************************************************************/
+/**
+*  @brief   Helper function to display descriptor ring
+*
+*  @return  void
+*
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+static void DisplayDescRing(void *pDescriptor,	/*   [ IN ] Descriptor buffer */
+			    int (*fpPrint) (const char *, ...)	/*   [ IN ] Callback to the print function */
+    ) {
+	dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
+	dmacHw_DESC_t *pStart;
+
+	if (pRing->pHead == NULL) {
+		return;
+	}
+
+	pStart = pRing->pHead;
+
+	while ((dmacHw_DESC_t *) pStart->llp != pRing->pHead) {
+		if (pStart == pRing->pHead) {
+			(*fpPrint) ("Head\n");
+		}
+		if (pStart == pRing->pTail) {
+			(*fpPrint) ("Tail\n");
+		}
+		if (pStart == pRing->pProg) {
+			(*fpPrint) ("Prog\n");
+		}
+		if (pStart == pRing->pEnd) {
+			(*fpPrint) ("End\n");
+		}
+		if (pStart == pRing->pFree) {
+			(*fpPrint) ("Free\n");
+		}
+		(*fpPrint) ("0x%X:\n", (uint32_t) pStart);
+		(*fpPrint) ("sar    0x%0X\n", pStart->sar);
+		(*fpPrint) ("dar    0x%0X\n", pStart->dar);
+		(*fpPrint) ("llp    0x%0X\n", pStart->llp);
+		(*fpPrint) ("ctl.lo 0x%0X\n", pStart->ctl.lo);
+		(*fpPrint) ("ctl.hi 0x%0X\n", pStart->ctl.hi);
+		(*fpPrint) ("sstat  0x%0X\n", pStart->sstat);
+		(*fpPrint) ("dstat  0x%0X\n", pStart->dstat);
+		(*fpPrint) ("devCtl 0x%0X\n", pStart->devCtl);
+
+		pStart = (dmacHw_DESC_t *) pStart->llp;
+	}
+	if (pStart == pRing->pHead) {
+		(*fpPrint) ("Head\n");
+	}
+	if (pStart == pRing->pTail) {
+		(*fpPrint) ("Tail\n");
+	}
+	if (pStart == pRing->pProg) {
+		(*fpPrint) ("Prog\n");
+	}
+	if (pStart == pRing->pEnd) {
+		(*fpPrint) ("End\n");
+	}
+	if (pStart == pRing->pFree) {
+		(*fpPrint) ("Free\n");
+	}
+	(*fpPrint) ("0x%X:\n", (uint32_t) pStart);
+	(*fpPrint) ("sar    0x%0X\n", pStart->sar);
+	(*fpPrint) ("dar    0x%0X\n", pStart->dar);
+	(*fpPrint) ("llp    0x%0X\n", pStart->llp);
+	(*fpPrint) ("ctl.lo 0x%0X\n", pStart->ctl.lo);
+	(*fpPrint) ("ctl.hi 0x%0X\n", pStart->ctl.hi);
+	(*fpPrint) ("sstat  0x%0X\n", pStart->sstat);
+	(*fpPrint) ("dstat  0x%0X\n", pStart->dstat);
+	(*fpPrint) ("devCtl 0x%0X\n", pStart->devCtl);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Check if DMA channel is the flow controller
+*
+*  @return  1 : If DMA is a flow controler
+*           0 : Peripheral is the flow controller
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+static inline int DmaIsFlowController(void *pDescriptor	/*   [ IN ] Descriptor buffer */
+    ) {
+	uint32_t ttfc =
+	    (dmacHw_GET_DESC_RING(pDescriptor))->pTail->ctl.
+	    lo & dmacHw_REG_CTL_TTFC_MASK;
+
+	switch (ttfc) {
+	case dmacHw_REG_CTL_TTFC_MM_DMAC:
+	case dmacHw_REG_CTL_TTFC_MP_DMAC:
+	case dmacHw_REG_CTL_TTFC_PM_DMAC:
+	case dmacHw_REG_CTL_TTFC_PP_DMAC:
+		return 1;
+	}
+
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Overwrites data length in the descriptor
+*
+*  This function overwrites data length in the descriptor
+*
+*
+*  @return   void
+*
+*  @note
+*          This is only used for PCM channel
+*/
+/****************************************************************************/
+void dmacHw_setDataLength(dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configuration settings */
+			  void *pDescriptor,	/*   [ IN ] Descriptor buffer */
+			  size_t dataLen	/*   [ IN ] Data length in bytes */
+    ) {
+	dmacHw_DESC_t *pProg;
+	dmacHw_DESC_t *pHead;
+	int srcTs = 0;
+	int srcTrSize = 0;
+
+	pHead = (dmacHw_GET_DESC_RING(pDescriptor))->pHead;
+	pProg = pHead;
+
+	srcTrSize = dmacHw_GetTrWidthInBytes(pConfig->srcMaxTransactionWidth);
+	srcTs = dataLen / srcTrSize;
+	do {
+		pProg->ctl.hi = srcTs & dmacHw_REG_CTL_BLOCK_TS_MASK;
+		pProg = (dmacHw_DESC_t *) pProg->llp;
+	} while (pProg != pHead);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Clears the interrupt
+*
+*  This function clears the DMA channel specific interrupt
+*
+*
+*  @return   void
+*
+*  @note
+*     Must be called under the context of ISR
+*/
+/****************************************************************************/
+void dmacHw_clearInterrupt(dmacHw_HANDLE_t handle	/* [ IN ] DMA Channel handle */
+    ) {
+	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+
+	dmacHw_TRAN_INT_CLEAR(pCblk->module, pCblk->channel);
+	dmacHw_BLOCK_INT_CLEAR(pCblk->module, pCblk->channel);
+	dmacHw_ERROR_INT_CLEAR(pCblk->module, pCblk->channel);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Returns the cause of channel specific DMA interrupt
+*
+*  This function returns the cause of interrupt
+*
+*  @return  Interrupt status, each bit representing a specific type of interrupt
+*
+*  @note
+*     Should be called under the context of ISR
+*/
+/****************************************************************************/
+dmacHw_INTERRUPT_STATUS_e dmacHw_getInterruptStatus(dmacHw_HANDLE_t handle	/* [ IN ] DMA Channel handle */
+    ) {
+	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+	dmacHw_INTERRUPT_STATUS_e status = dmacHw_INTERRUPT_STATUS_NONE;
+
+	if (dmacHw_REG_INT_STAT_TRAN(pCblk->module) &
+	    ((0x00000001 << pCblk->channel))) {
+		status |= dmacHw_INTERRUPT_STATUS_TRANS;
+	}
+	if (dmacHw_REG_INT_STAT_BLOCK(pCblk->module) &
+	    ((0x00000001 << pCblk->channel))) {
+		status |= dmacHw_INTERRUPT_STATUS_BLOCK;
+	}
+	if (dmacHw_REG_INT_STAT_ERROR(pCblk->module) &
+	    ((0x00000001 << pCblk->channel))) {
+		status |= dmacHw_INTERRUPT_STATUS_ERROR;
+	}
+
+	return status;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Indentifies a DMA channel causing interrupt
+*
+*  This functions returns a channel causing interrupt of type dmacHw_INTERRUPT_STATUS_e
+*
+*  @return  NULL   : No channel causing DMA interrupt
+*           ! NULL : Handle to a channel causing DMA interrupt
+*  @note
+*     dmacHw_clearInterrupt() must be called with a valid handle after calling this function
+*/
+/****************************************************************************/
+dmacHw_HANDLE_t dmacHw_getInterruptSource(void)
+{
+	uint32_t i;
+
+	for (i = 0; i < dmaChannelCount_0 + dmaChannelCount_1; i++) {
+		if ((dmacHw_REG_INT_STAT_TRAN(dmacHw_gCblk[i].module) &
+		     ((0x00000001 << dmacHw_gCblk[i].channel)))
+		    || (dmacHw_REG_INT_STAT_BLOCK(dmacHw_gCblk[i].module) &
+			((0x00000001 << dmacHw_gCblk[i].channel)))
+		    || (dmacHw_REG_INT_STAT_ERROR(dmacHw_gCblk[i].module) &
+			((0x00000001 << dmacHw_gCblk[i].channel)))
+		    ) {
+			return dmacHw_CBLK_TO_HANDLE(&dmacHw_gCblk[i]);
+		}
+	}
+	return dmacHw_CBLK_TO_HANDLE(NULL);
+}
+
+/****************************************************************************/
+/**
+*  @brief  Estimates number of descriptor needed to perform certain DMA transfer
+*
+*
+*  @return  On failure : -1
+*           On success : Number of descriptor count
+*
+*
+*/
+/****************************************************************************/
+int dmacHw_calculateDescriptorCount(dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configuration settings */
+				    void *pSrcAddr,	/*   [ IN ] Source (Peripheral/Memory) address */
+				    void *pDstAddr,	/*   [ IN ] Destination (Peripheral/Memory) address */
+				    size_t dataLen	/*   [ IN ] Data length in bytes */
+    ) {
+	int srcTs = 0;
+	int oddSize = 0;
+	int descCount = 0;
+	int dstTrSize = 0;
+	int srcTrSize = 0;
+	uint32_t maxBlockSize = dmacHw_MAX_BLOCKSIZE;
+	dmacHw_TRANSACTION_WIDTH_e dstTrWidth;
+	dmacHw_TRANSACTION_WIDTH_e srcTrWidth;
+
+	dstTrSize = dmacHw_GetTrWidthInBytes(pConfig->dstMaxTransactionWidth);
+	srcTrSize = dmacHw_GetTrWidthInBytes(pConfig->srcMaxTransactionWidth);
+
+	/* Skip Tx if buffer is NULL  or length is unknown */
+	if ((pSrcAddr == NULL) || (pDstAddr == NULL) || (dataLen == 0)) {
+		/* Do not initiate transfer */
+		return -1;
+	}
+
+	/* Ensure scatter and gather are transaction aligned */
+	if (pConfig->srcGatherWidth % srcTrSize
+	    || pConfig->dstScatterWidth % dstTrSize) {
+		return -1;
+	}
+
+	/*
+	   Background 1: DMAC can not perform DMA if source and destination addresses are
+	   not properly aligned with the channel's transaction width. So, for successful
+	   DMA transfer, transaction width must be set according to the alignment of the
+	   source and destination address.
+	 */
+
+	/* Adjust destination transaction width if destination address is not aligned properly */
+	dstTrWidth = pConfig->dstMaxTransactionWidth;
+	while (dmacHw_ADDRESS_MASK(dstTrSize) & (uint32_t) pDstAddr) {
+		dstTrWidth = dmacHw_GetNextTrWidth(dstTrWidth);
+		dstTrSize = dmacHw_GetTrWidthInBytes(dstTrWidth);
+	}
+
+	/* Adjust source transaction width if source address is not aligned properly */
+	srcTrWidth = pConfig->srcMaxTransactionWidth;
+	while (dmacHw_ADDRESS_MASK(srcTrSize) & (uint32_t) pSrcAddr) {
+		srcTrWidth = dmacHw_GetNextTrWidth(srcTrWidth);
+		srcTrSize = dmacHw_GetTrWidthInBytes(srcTrWidth);
+	}
+
+	/* Find the maximum transaction per descriptor */
+	if (pConfig->maxDataPerBlock
+	    && ((pConfig->maxDataPerBlock / srcTrSize) <
+		dmacHw_MAX_BLOCKSIZE)) {
+		maxBlockSize = pConfig->maxDataPerBlock / srcTrSize;
+	}
+
+	/* Find number of source transactions needed to complete the DMA transfer */
+	srcTs = dataLen / srcTrSize;
+	/* Find the odd number of bytes that need to be transferred as single byte transaction width */
+	if (srcTs && (dstTrSize > srcTrSize)) {
+		oddSize = dataLen % dstTrSize;
+		/* Adjust source transaction count due to "oddSize" */
+		srcTs = srcTs - (oddSize / srcTrSize);
+	} else {
+		oddSize = dataLen % srcTrSize;
+	}
+	/* Adjust "descCount" due to "oddSize" */
+	if (oddSize) {
+		descCount++;
+	}
+
+	/* Find the number of descriptor needed for total "srcTs" */
+	if (srcTs) {
+		descCount += ((srcTs - 1) / maxBlockSize) + 1;
+	}
+
+	return descCount;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Check the existance of pending descriptor
+*
+*  This function confirmes if there is any pending descriptor in the chain
+*  to program the channel
+*
+*  @return  1 : Channel need to be programmed with pending descriptor
+*           0 : No more pending descriptor to programe the channel
+*
+*  @note
+*     - This function should be called from ISR in case there are pending
+*       descriptor to program the channel.
+*
+*     Example:
+*
+*     dmac_isr ()
+*     {
+*         ...
+*         if (dmacHw_descriptorPending (handle))
+*         {
+*            dmacHw_initiateTransfer (handle);
+*         }
+*     }
+*
+*/
+/****************************************************************************/
+uint32_t dmacHw_descriptorPending(dmacHw_HANDLE_t handle,	/*   [ IN ] DMA Channel handle */
+				  void *pDescriptor	/*   [ IN ] Descriptor buffer */
+    ) {
+	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+	dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
+
+	/* Make sure channel is not busy */
+	if (!CHANNEL_BUSY(pCblk->module, pCblk->channel)) {
+		/* Check if pEnd is not processed */
+		if (pRing->pEnd) {
+			/* Something left for processing */
+			return 1;
+		}
+	}
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Program channel register to stop transfer
+*
+*  Ensures the channel is not doing any transfer after calling this function
+*
+*  @return  void
+*
+*/
+/****************************************************************************/
+void dmacHw_stopTransfer(dmacHw_HANDLE_t handle	/*   [ IN ] DMA Channel handle */
+    ) {
+	dmacHw_CBLK_t *pCblk;
+
+	pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+
+	/* Stop the channel */
+	dmacHw_DMA_STOP(pCblk->module, pCblk->channel);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Deallocates source or destination memory, allocated
+*
+*  This function can be called to deallocate data memory that was DMAed successfully
+*
+*  @return  On failure : -1
+*           On success : Number of buffer freed
+*
+*  @note
+*     This function will be called ONLY, when source OR destination address is pointing
+*     to dynamic memory
+*/
+/****************************************************************************/
+int dmacHw_freeMem(dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configuration settings */
+		   void *pDescriptor,	/*   [ IN ] Descriptor buffer */
+		   void (*fpFree) (void *)	/*   [ IN ] Function pointer to free data memory */
+    ) {
+	dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
+	uint32_t count = 0;
+
+	if (fpFree == NULL) {
+		return -1;
+	}
+
+	while ((pRing->pFree != pRing->pTail)
+	       && (pRing->pFree->ctl.lo & dmacHw_DESC_FREE)) {
+		if (pRing->pFree->devCtl == dmacHw_FREE_USER_MEMORY) {
+			/* Identify, which memory to free */
+			if (dmacHw_DST_IS_MEMORY(pConfig->transferType)) {
+				(*fpFree) ((void *)pRing->pFree->dar);
+			} else {
+				/* Destination was a peripheral */
+				(*fpFree) ((void *)pRing->pFree->sar);
+			}
+			/* Unmark user memory to indicate it is freed */
+			pRing->pFree->devCtl = ~dmacHw_FREE_USER_MEMORY;
+		}
+		dmacHw_NEXT_DESC(pRing, pFree);
+
+		count++;
+	}
+
+	return count;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Prepares descriptor ring, when source peripheral working as a flow controller
+*
+*  This function will update the discriptor ring by allocating buffers, when source peripheral
+*  has to work as a flow controller to transfer data from:
+*           - Peripheral to memory.
+*
+*  @return  On failure : -1
+*           On success : Number of descriptor updated
+*
+*
+*  @note
+*     Channel must be configured for peripheral to memory transfer
+*
+*/
+/****************************************************************************/
+int dmacHw_setVariableDataDescriptor(dmacHw_HANDLE_t handle,	/*   [ IN ] DMA Channel handle */
+				     dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configuration settings */
+				     void *pDescriptor,	/*   [ IN ] Descriptor buffer */
+				     uint32_t srcAddr,	/*   [ IN ] Source peripheral address */
+				     void *(*fpAlloc) (int len),	/*   [ IN ] Function pointer  that provides destination memory */
+				     int len,	/*   [ IN ] Number of bytes "fpAlloc" will allocate for destination */
+				     int num	/*   [ IN ] Number of descriptor to set */
+    ) {
+	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+	dmacHw_DESC_t *pProg = NULL;
+	dmacHw_DESC_t *pLast = NULL;
+	dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
+	uint32_t dstAddr;
+	uint32_t controlParam;
+	int i;
+
+	dmacHw_ASSERT(pConfig->transferType ==
+		      dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM);
+
+	if (num > pRing->num) {
+		return -1;
+	}
+
+	pLast = pRing->pEnd;	/* Last descriptor updated */
+	pProg = pRing->pHead;	/* First descriptor in the new list */
+
+	controlParam = pConfig->srcUpdate |
+	    pConfig->dstUpdate |
+	    pConfig->srcMaxTransactionWidth |
+	    pConfig->dstMaxTransactionWidth |
+	    pConfig->srcMasterInterface |
+	    pConfig->dstMasterInterface |
+	    pConfig->srcMaxBurstWidth |
+	    pConfig->dstMaxBurstWidth |
+	    dmacHw_REG_CTL_TTFC_PM_PERI |
+	    dmacHw_REG_CTL_LLP_DST_EN |
+	    dmacHw_REG_CTL_LLP_SRC_EN | dmacHw_REG_CTL_INT_EN;
+
+	for (i = 0; i < num; i++) {
+		/* Allocate Rx buffer only for idle descriptor */
+		if (((pRing->pHead->ctl.hi & dmacHw_DESC_FREE) == 0) ||
+		    ((dmacHw_DESC_t *) pRing->pHead->llp == pRing->pTail)
+		    ) {
+			/* Rx descriptor is not idle */
+			break;
+		}
+		/* Set source address */
+		pRing->pHead->sar = srcAddr;
+		if (fpAlloc) {
+			/* Allocate memory for buffer in descriptor */
+			dstAddr = (uint32_t) (*fpAlloc) (len);
+			/* Check the destination address */
+			if (dstAddr == 0) {
+				if (i == 0) {
+					/* Not a single descriptor is available */
+					return -1;
+				}
+				break;
+			}
+			/* Set destination address */
+			pRing->pHead->dar = dstAddr;
+		}
+		/* Set control information */
+		pRing->pHead->ctl.lo = controlParam;
+		/* Use "devCtl" to mark the memory that need to be freed later */
+		pRing->pHead->devCtl = dmacHw_FREE_USER_MEMORY;
+		/* Descriptor is now owned by the channel */
+		pRing->pHead->ctl.hi = 0;
+		/* Remember the descriptor last updated */
+		pRing->pEnd = pRing->pHead;
+		/* Update next descriptor */
+		dmacHw_NEXT_DESC(pRing, pHead);
+	}
+
+	/* Mark the end of the list */
+	pRing->pEnd->ctl.lo &=
+	    ~(dmacHw_REG_CTL_LLP_DST_EN | dmacHw_REG_CTL_LLP_SRC_EN);
+	/* Connect the list */
+	if (pLast != pProg) {
+		pLast->ctl.lo |=
+		    dmacHw_REG_CTL_LLP_DST_EN | dmacHw_REG_CTL_LLP_SRC_EN;
+	}
+	/* Mark the descriptors are updated */
+	pCblk->descUpdated = 1;
+	if (!pCblk->varDataStarted) {
+		/* LLP must be pointing to the first descriptor */
+		dmacHw_SET_LLP(pCblk->module, pCblk->channel,
+			       (uint32_t) pProg - pRing->virt2PhyOffset);
+		/* Channel, handling variable data started */
+		pCblk->varDataStarted = 1;
+	}
+
+	return i;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Read data DMAed to memory
+*
+*  This function will read data that has been DMAed to memory while transfering from:
+*          - Memory to memory
+*          - Peripheral to memory
+*
+*  @param    handle     -
+*  @param    ppBbuf     -
+*  @param    pLen       -
+*
+*  @return  0 - No more data is available to read
+*           1 - More data might be available to read
+*
+*/
+/****************************************************************************/
+int dmacHw_readTransferredData(dmacHw_HANDLE_t handle,	/*  [ IN ] DMA Channel handle */
+			       dmacHw_CONFIG_t *pConfig,	/*   [ IN ]  Configuration settings */
+			       void *pDescriptor,	/*   [ IN ] Descriptor buffer */
+			       void **ppBbuf,	/*   [ OUT ] Data received */
+			       size_t *pLlen	/*   [ OUT ] Length of the data received */
+    ) {
+	dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
+
+	(void)handle;
+
+	if (pConfig->transferMode != dmacHw_TRANSFER_MODE_CONTINUOUS) {
+		if (((pRing->pTail->ctl.hi & dmacHw_DESC_FREE) == 0) ||
+		    (pRing->pTail == pRing->pHead)
+		    ) {
+			/* No receive data available */
+			*ppBbuf = (char *)NULL;
+			*pLlen = 0;
+
+			return 0;
+		}
+	}
+
+	/* Return read buffer and length */
+	*ppBbuf = (char *)pRing->pTail->dar;
+
+	/* Extract length of the received data */
+	if (DmaIsFlowController(pDescriptor)) {
+		uint32_t srcTrSize = 0;
+
+		switch (pRing->pTail->ctl.lo & dmacHw_REG_CTL_SRC_TR_WIDTH_MASK) {
+		case dmacHw_REG_CTL_SRC_TR_WIDTH_8:
+			srcTrSize = 1;
+			break;
+		case dmacHw_REG_CTL_SRC_TR_WIDTH_16:
+			srcTrSize = 2;
+			break;
+		case dmacHw_REG_CTL_SRC_TR_WIDTH_32:
+			srcTrSize = 4;
+			break;
+		case dmacHw_REG_CTL_SRC_TR_WIDTH_64:
+			srcTrSize = 8;
+			break;
+		default:
+			dmacHw_ASSERT(0);
+		}
+		/* Calculate length from the block size */
+		*pLlen =
+		    (pRing->pTail->ctl.hi & dmacHw_REG_CTL_BLOCK_TS_MASK) *
+		    srcTrSize;
+	} else {
+		/* Extract length from the source peripheral */
+		*pLlen = pRing->pTail->sstat;
+	}
+
+	/* Advance tail to next descriptor */
+	dmacHw_NEXT_DESC(pRing, pTail);
+
+	return 1;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Set descriptor carrying control information
+*
+*  This function will be used to send specific control information to the device
+*  using the DMA channel
+*
+*
+*  @return  -1 - On failure
+*            0 - On success
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+int dmacHw_setControlDescriptor(dmacHw_CONFIG_t *pConfig,	/*   [ IN ] Configuration settings */
+				void *pDescriptor,	/*   [ IN ] Descriptor buffer */
+				uint32_t ctlAddress,	/*   [ IN ] Address of the device control register */
+				uint32_t control	/*   [ IN ] Device control information */
+    ) {
+	dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor);
+
+	if (ctlAddress == 0) {
+		return -1;
+	}
+
+	/* Check the availability of descriptors in the ring */
+	if ((pRing->pHead->ctl.hi & dmacHw_DESC_FREE) == 0) {
+		return -1;
+	}
+	/* Set control information */
+	pRing->pHead->devCtl = control;
+	/* Set source and destination address */
+	pRing->pHead->sar = (uint32_t) &pRing->pHead->devCtl;
+	pRing->pHead->dar = ctlAddress;
+	/* Set control parameters */
+	if (pConfig->flowControler == dmacHw_FLOW_CONTROL_DMA) {
+		pRing->pHead->ctl.lo = pConfig->transferType |
+		    dmacHw_SRC_ADDRESS_UPDATE_MODE_INC |
+		    dmacHw_DST_ADDRESS_UPDATE_MODE_INC |
+		    dmacHw_SRC_TRANSACTION_WIDTH_32 |
+		    pConfig->dstMaxTransactionWidth |
+		    dmacHw_SRC_BURST_WIDTH_0 |
+		    dmacHw_DST_BURST_WIDTH_0 |
+		    pConfig->srcMasterInterface |
+		    pConfig->dstMasterInterface | dmacHw_REG_CTL_INT_EN;
+	} else {
+		uint32_t transferType = 0;
+		switch (pConfig->transferType) {
+		case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM:
+			transferType = dmacHw_REG_CTL_TTFC_PM_PERI;
+			break;
+		case dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL:
+			transferType = dmacHw_REG_CTL_TTFC_MP_PERI;
+			break;
+		default:
+			dmacHw_ASSERT(0);
+		}
+		pRing->pHead->ctl.lo = transferType |
+		    dmacHw_SRC_ADDRESS_UPDATE_MODE_INC |
+		    dmacHw_DST_ADDRESS_UPDATE_MODE_INC |
+		    dmacHw_SRC_TRANSACTION_WIDTH_32 |
+		    pConfig->dstMaxTransactionWidth |
+		    dmacHw_SRC_BURST_WIDTH_0 |
+		    dmacHw_DST_BURST_WIDTH_0 |
+		    pConfig->srcMasterInterface |
+		    pConfig->dstMasterInterface |
+		    pConfig->flowControler | dmacHw_REG_CTL_INT_EN;
+	}
+
+	/* Set block transaction size to one 32 bit transaction */
+	pRing->pHead->ctl.hi = dmacHw_REG_CTL_BLOCK_TS_MASK & 1;
+
+	/* Remember the descriptor to initialize the registers */
+	if (pRing->pProg == dmacHw_DESC_INIT) {
+		pRing->pProg = pRing->pHead;
+	}
+	pRing->pEnd = pRing->pHead;
+
+	/* Advance the descriptor */
+	dmacHw_NEXT_DESC(pRing, pHead);
+
+	/* Update Tail pointer if destination is a peripheral */
+	if (!dmacHw_DST_IS_MEMORY(pConfig->transferType)) {
+		pRing->pTail = pRing->pHead;
+	}
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Sets channel specific user data
+*
+*  This function associates user data to a specif DMA channel
+*
+*/
+/****************************************************************************/
+void dmacHw_setChannelUserData(dmacHw_HANDLE_t handle,	/*  [ IN ] DMA Channel handle */
+			       void *userData	/*  [ IN ] User data */
+    ) {
+	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+
+	pCblk->userData = userData;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Gets channel specific user data
+*
+*  This function returns user data specific to a DMA channel
+*
+*  @return   user data
+*/
+/****************************************************************************/
+void *dmacHw_getChannelUserData(dmacHw_HANDLE_t handle	/*  [ IN ] DMA Channel handle */
+    ) {
+	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+
+	return pCblk->userData;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Resets descriptor control information
+*
+*  @return  void
+*/
+/****************************************************************************/
+void dmacHw_resetDescriptorControl(void *pDescriptor	/*   [ IN ] Descriptor buffer  */
+    ) {
+	int i;
+	dmacHw_DESC_RING_t *pRing;
+	dmacHw_DESC_t *pDesc;
+
+	pRing = dmacHw_GET_DESC_RING(pDescriptor);
+	pDesc = pRing->pHead;
+
+	for (i = 0; i < pRing->num; i++) {
+		/* Mark descriptor is ready to use */
+		pDesc->ctl.hi = dmacHw_DESC_FREE;
+		/* Look into next link list item */
+		pDesc++;
+	}
+	pRing->pFree = pRing->pTail = pRing->pEnd = pRing->pHead;
+	pRing->pProg = dmacHw_DESC_INIT;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Displays channel specific registers and other control parameters
+*
+*  @return  void
+*
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+void dmacHw_printDebugInfo(dmacHw_HANDLE_t handle,	/*  [ IN ] DMA Channel handle */
+			   void *pDescriptor,	/*   [ IN ] Descriptor buffer */
+			   int (*fpPrint) (const char *, ...)	/*  [ IN ] Print callback function */
+    ) {
+	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
+
+	DisplayRegisterContents(pCblk->module, pCblk->channel, fpPrint);
+	DisplayDescRing(pDescriptor, fpPrint);
+}
-- 
cgit v1.2.3


From 7ba09020287fa6c181707490ea7143abb3db55b1 Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Fri, 7 Aug 2009 20:09:49 +0100
Subject: ARM: 5660/1: bcmring: add csp timer block header and source files

add csp timer block header and source files

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-bcmring/csp/tmr/Makefile             |   1 +
 arch/arm/mach-bcmring/csp/tmr/tmrHw.c              | 576 +++++++++++++++++++++
 arch/arm/mach-bcmring/include/csp/tmrHw.h          | 263 ++++++++++
 arch/arm/mach-bcmring/include/mach/csp/tmrHw_reg.h |  82 +++
 4 files changed, 922 insertions(+)
 create mode 100644 arch/arm/mach-bcmring/csp/tmr/Makefile
 create mode 100644 arch/arm/mach-bcmring/csp/tmr/tmrHw.c
 create mode 100644 arch/arm/mach-bcmring/include/csp/tmrHw.h
 create mode 100644 arch/arm/mach-bcmring/include/mach/csp/tmrHw_reg.h

(limited to 'arch')

diff --git a/arch/arm/mach-bcmring/csp/tmr/Makefile b/arch/arm/mach-bcmring/csp/tmr/Makefile
new file mode 100644
index 00000000000..244a61ab769
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/tmr/Makefile
@@ -0,0 +1 @@
+obj-y += tmrHw.o
diff --git a/arch/arm/mach-bcmring/csp/tmr/tmrHw.c b/arch/arm/mach-bcmring/csp/tmr/tmrHw.c
new file mode 100644
index 00000000000..5c1c9a0e5ed
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/tmr/tmrHw.c
@@ -0,0 +1,576 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    tmrHw.c
+*
+*  @brief   Low level Timer driver routines
+*
+*  @note
+*
+*   These routines provide basic timer functionality only.
+*/
+/****************************************************************************/
+
+/* ---- Include Files ---------------------------------------------------- */
+
+#include <csp/errno.h>
+#include <csp/stdint.h>
+
+#include <csp/tmrHw.h>
+#include <mach/csp/tmrHw_reg.h>
+
+#define tmrHw_ASSERT(a)                     if (!(a)) *(char *)0 = 0
+#define tmrHw_MILLISEC_PER_SEC              (1000)
+
+#define tmrHw_LOW_1_RESOLUTION_COUNT        (tmrHw_LOW_RESOLUTION_CLOCK / tmrHw_MILLISEC_PER_SEC)
+#define tmrHw_LOW_1_MAX_MILLISEC            (0xFFFFFFFF / tmrHw_LOW_1_RESOLUTION_COUNT)
+#define tmrHw_LOW_16_RESOLUTION_COUNT       (tmrHw_LOW_1_RESOLUTION_COUNT / 16)
+#define tmrHw_LOW_16_MAX_MILLISEC           (0xFFFFFFFF / tmrHw_LOW_16_RESOLUTION_COUNT)
+#define tmrHw_LOW_256_RESOLUTION_COUNT      (tmrHw_LOW_1_RESOLUTION_COUNT / 256)
+#define tmrHw_LOW_256_MAX_MILLISEC          (0xFFFFFFFF / tmrHw_LOW_256_RESOLUTION_COUNT)
+
+#define tmrHw_HIGH_1_RESOLUTION_COUNT       (tmrHw_HIGH_RESOLUTION_CLOCK / tmrHw_MILLISEC_PER_SEC)
+#define tmrHw_HIGH_1_MAX_MILLISEC           (0xFFFFFFFF / tmrHw_HIGH_1_RESOLUTION_COUNT)
+#define tmrHw_HIGH_16_RESOLUTION_COUNT      (tmrHw_HIGH_1_RESOLUTION_COUNT / 16)
+#define tmrHw_HIGH_16_MAX_MILLISEC          (0xFFFFFFFF / tmrHw_HIGH_16_RESOLUTION_COUNT)
+#define tmrHw_HIGH_256_RESOLUTION_COUNT     (tmrHw_HIGH_1_RESOLUTION_COUNT / 256)
+#define tmrHw_HIGH_256_MAX_MILLISEC         (0xFFFFFFFF / tmrHw_HIGH_256_RESOLUTION_COUNT)
+
+static void ResetTimer(tmrHw_ID_t timerId)
+    __attribute__ ((section(".aramtext")));
+static int tmrHw_divide(int num, int denom)
+    __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+*  @brief   Get timer capability
+*
+*  This function returns various capabilities/attributes of a timer
+*
+*  @return  Capability
+*
+*/
+/****************************************************************************/
+uint32_t tmrHw_getTimerCapability(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
+				  tmrHw_CAPABILITY_e capability	/*  [ IN ] Timer capability */
+) {
+	switch (capability) {
+	case tmrHw_CAPABILITY_CLOCK:
+		return (timerId <=
+			1) ? tmrHw_LOW_RESOLUTION_CLOCK :
+		    tmrHw_HIGH_RESOLUTION_CLOCK;
+	case tmrHw_CAPABILITY_RESOLUTION:
+		return 32;
+	default:
+		return 0;
+	}
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Resets a timer
+*
+*  This function initializes  timer
+*
+*  @return  void
+*
+*/
+/****************************************************************************/
+static void ResetTimer(tmrHw_ID_t timerId	/*  [ IN ] Timer Id */
+) {
+	/* Reset timer */
+	pTmrHw[timerId].LoadValue = 0;
+	pTmrHw[timerId].CurrentValue = 0xFFFFFFFF;
+	pTmrHw[timerId].Control = 0;
+	pTmrHw[timerId].BackgroundLoad = 0;
+	/* Always configure as a 32 bit timer */
+	pTmrHw[timerId].Control |= tmrHw_CONTROL_32BIT;
+	/* Clear interrupt only if raw status interrupt is set */
+	if (pTmrHw[timerId].RawInterruptStatus) {
+		pTmrHw[timerId].InterruptClear = 0xFFFFFFFF;
+	}
+}
+
+/****************************************************************************/
+/**
+*  @brief   Sets counter value for an interval in ms
+*
+*  @return   On success: Effective counter value set
+*            On failure: 0
+*
+*/
+/****************************************************************************/
+static tmrHw_INTERVAL_t SetTimerPeriod(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
+				       tmrHw_INTERVAL_t msec	/*  [ IN ] Interval in milli-second */
+) {
+	uint32_t scale = 0;
+	uint32_t count = 0;
+
+	if (timerId == 0 || timerId == 1) {
+		if (msec <= tmrHw_LOW_1_MAX_MILLISEC) {
+			pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_1;
+			scale = tmrHw_LOW_1_RESOLUTION_COUNT;
+		} else if (msec <= tmrHw_LOW_16_MAX_MILLISEC) {
+			pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_16;
+			scale = tmrHw_LOW_16_RESOLUTION_COUNT;
+		} else if (msec <= tmrHw_LOW_256_MAX_MILLISEC) {
+			pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_256;
+			scale = tmrHw_LOW_256_RESOLUTION_COUNT;
+		} else {
+			return 0;
+		}
+
+		count = msec * scale;
+		/* Set counter value */
+		pTmrHw[timerId].LoadValue = count;
+		pTmrHw[timerId].BackgroundLoad = count;
+
+	} else if (timerId == 2 || timerId == 3) {
+		if (msec <= tmrHw_HIGH_1_MAX_MILLISEC) {
+			pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_1;
+			scale = tmrHw_HIGH_1_RESOLUTION_COUNT;
+		} else if (msec <= tmrHw_HIGH_16_MAX_MILLISEC) {
+			pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_16;
+			scale = tmrHw_HIGH_16_RESOLUTION_COUNT;
+		} else if (msec <= tmrHw_HIGH_256_MAX_MILLISEC) {
+			pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_256;
+			scale = tmrHw_HIGH_256_RESOLUTION_COUNT;
+		} else {
+			return 0;
+		}
+
+		count = msec * scale;
+		/* Set counter value */
+		pTmrHw[timerId].LoadValue = count;
+		pTmrHw[timerId].BackgroundLoad = count;
+	}
+	return count / scale;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Configures a periodic timer in terms of timer interrupt rate
+*
+*  This function initializes a periodic timer to generate specific number of
+*  timer interrupt per second
+*
+*  @return   On success: Effective timer frequency
+*            On failure: 0
+*
+*/
+/****************************************************************************/
+tmrHw_RATE_t tmrHw_setPeriodicTimerRate(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
+					tmrHw_RATE_t rate	/*  [ IN ] Number of timer interrupt per second */
+) {
+	uint32_t resolution = 0;
+	uint32_t count = 0;
+	ResetTimer(timerId);
+
+	/* Set timer mode periodic */
+	pTmrHw[timerId].Control |= tmrHw_CONTROL_PERIODIC;
+	pTmrHw[timerId].Control &= ~tmrHw_CONTROL_ONESHOT;
+	/* Set timer in highest resolution */
+	pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_1;
+
+	if (rate && (timerId == 0 || timerId == 1)) {
+		if (rate > tmrHw_LOW_RESOLUTION_CLOCK) {
+			return 0;
+		}
+		resolution = tmrHw_LOW_RESOLUTION_CLOCK;
+	} else if (rate && (timerId == 2 || timerId == 3)) {
+		if (rate > tmrHw_HIGH_RESOLUTION_CLOCK) {
+			return 0;
+		} else {
+			resolution = tmrHw_HIGH_RESOLUTION_CLOCK;
+		}
+	} else {
+		return 0;
+	}
+	/* Find the counter value */
+	count = resolution / rate;
+	/* Set counter value */
+	pTmrHw[timerId].LoadValue = count;
+	pTmrHw[timerId].BackgroundLoad = count;
+
+	return resolution / count;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Configures a periodic timer to generate timer interrupt after
+*           certain time interval
+*
+*  This function initializes a periodic timer to generate timer interrupt
+*  after every time interval in millisecond
+*
+*  @return   On success: Effective interval set in milli-second
+*            On failure: 0
+*
+*/
+/****************************************************************************/
+tmrHw_INTERVAL_t tmrHw_setPeriodicTimerInterval(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
+						tmrHw_INTERVAL_t msec	/*  [ IN ] Interval in milli-second */
+) {
+	ResetTimer(timerId);
+
+	/* Set timer mode periodic */
+	pTmrHw[timerId].Control |= tmrHw_CONTROL_PERIODIC;
+	pTmrHw[timerId].Control &= ~tmrHw_CONTROL_ONESHOT;
+
+	return SetTimerPeriod(timerId, msec);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Configures a periodic timer to generate timer interrupt just once
+*           after certain time interval
+*
+*  This function initializes a periodic timer to generate a single ticks after
+*  certain time interval in millisecond
+*
+*  @return   On success: Effective interval set in milli-second
+*            On failure: 0
+*
+*/
+/****************************************************************************/
+tmrHw_INTERVAL_t tmrHw_setOneshotTimerInterval(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
+					       tmrHw_INTERVAL_t msec	/*  [ IN ] Interval in milli-second */
+) {
+	ResetTimer(timerId);
+
+	/* Set timer mode oneshot */
+	pTmrHw[timerId].Control |= tmrHw_CONTROL_PERIODIC;
+	pTmrHw[timerId].Control |= tmrHw_CONTROL_ONESHOT;
+
+	return SetTimerPeriod(timerId, msec);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Configures a timer to run as a free running timer
+*
+*  This function initializes a timer to run as a free running timer
+*
+*  @return   Timer resolution (count / sec)
+*
+*/
+/****************************************************************************/
+tmrHw_RATE_t tmrHw_setFreeRunningTimer(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
+				       uint32_t divider	/*  [ IN ] Dividing the clock frequency */
+) {
+	uint32_t scale = 0;
+
+	ResetTimer(timerId);
+	/* Set timer as free running mode */
+	pTmrHw[timerId].Control &= ~tmrHw_CONTROL_PERIODIC;
+	pTmrHw[timerId].Control &= ~tmrHw_CONTROL_ONESHOT;
+
+	if (divider >= 64) {
+		pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_256;
+		scale = 256;
+	} else if (divider >= 8) {
+		pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_16;
+		scale = 16;
+	} else {
+		pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_1;
+		scale = 1;
+	}
+
+	if (timerId == 0 || timerId == 1) {
+		return tmrHw_divide(tmrHw_LOW_RESOLUTION_CLOCK, scale);
+	} else if (timerId == 2 || timerId == 3) {
+		return tmrHw_divide(tmrHw_HIGH_RESOLUTION_CLOCK, scale);
+	}
+
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Starts a timer
+*
+*  This function starts a preconfigured timer
+*
+*  @return  -1     - On Failure
+*            0     - On Success
+*
+*/
+/****************************************************************************/
+int tmrHw_startTimer(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
+) {
+	pTmrHw[timerId].Control |= tmrHw_CONTROL_TIMER_ENABLE;
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Stops a timer
+*
+*  This function stops a running timer
+*
+*  @return  -1     - On Failure
+*            0     - On Success
+*
+*/
+/****************************************************************************/
+int tmrHw_stopTimer(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
+) {
+	pTmrHw[timerId].Control &= ~tmrHw_CONTROL_TIMER_ENABLE;
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Gets current timer count
+*
+*  This function returns the current timer value
+*
+*  @return  Current downcounting timer value
+*
+*/
+/****************************************************************************/
+uint32_t tmrHw_GetCurrentCount(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
+) {
+	/* return 32 bit timer value */
+	switch (pTmrHw[timerId].Control & tmrHw_CONTROL_MODE_MASK) {
+	case tmrHw_CONTROL_FREE_RUNNING:
+		if (pTmrHw[timerId].CurrentValue) {
+			return tmrHw_MAX_COUNT - pTmrHw[timerId].CurrentValue;
+		}
+		break;
+	case tmrHw_CONTROL_PERIODIC:
+	case tmrHw_CONTROL_ONESHOT:
+		return pTmrHw[timerId].BackgroundLoad -
+		    pTmrHw[timerId].CurrentValue;
+	}
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Gets timer count rate
+*
+*  This function returns the number of counts per second
+*
+*  @return  Count rate
+*
+*/
+/****************************************************************************/
+tmrHw_RATE_t tmrHw_getCountRate(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
+) {
+	uint32_t divider = 0;
+
+	switch (pTmrHw[timerId].Control & tmrHw_CONTROL_PRESCALE_MASK) {
+	case tmrHw_CONTROL_PRESCALE_1:
+		divider = 1;
+		break;
+	case tmrHw_CONTROL_PRESCALE_16:
+		divider = 16;
+		break;
+	case tmrHw_CONTROL_PRESCALE_256:
+		divider = 256;
+		break;
+	default:
+		tmrHw_ASSERT(0);
+	}
+
+	if (timerId == 0 || timerId == 1) {
+		return tmrHw_divide(tmrHw_LOW_RESOLUTION_CLOCK, divider);
+	} else {
+		return tmrHw_divide(tmrHw_HIGH_RESOLUTION_CLOCK, divider);
+	}
+	return 0;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Enables timer interrupt
+*
+*  This function enables the timer interrupt
+*
+*  @return   N/A
+*
+*/
+/****************************************************************************/
+void tmrHw_enableInterrupt(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
+) {
+	pTmrHw[timerId].Control |= tmrHw_CONTROL_INTERRUPT_ENABLE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Disables timer interrupt
+*
+*  This function disable the timer interrupt
+*
+*  @return   N/A
+*
+*/
+/****************************************************************************/
+void tmrHw_disableInterrupt(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
+) {
+	pTmrHw[timerId].Control &= ~tmrHw_CONTROL_INTERRUPT_ENABLE;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Clears the interrupt
+*
+*  This function clears the timer interrupt
+*
+*  @return   N/A
+*
+*  @note
+*     Must be called under the context of ISR
+*/
+/****************************************************************************/
+void tmrHw_clearInterrupt(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
+) {
+	pTmrHw[timerId].InterruptClear = 0x1;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Gets the interrupt status
+*
+*  This function returns timer interrupt status
+*
+*  @return   Interrupt status
+*/
+/****************************************************************************/
+tmrHw_INTERRUPT_STATUS_e tmrHw_getInterruptStatus(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
+) {
+	if (pTmrHw[timerId].InterruptStatus) {
+		return tmrHw_INTERRUPT_STATUS_SET;
+	} else {
+		return tmrHw_INTERRUPT_STATUS_UNSET;
+	}
+}
+
+/****************************************************************************/
+/**
+*  @brief   Indentifies a timer causing interrupt
+*
+*  This functions returns a timer causing interrupt
+*
+*  @return  0xFFFFFFFF   : No timer causing an interrupt
+*           ! 0xFFFFFFFF : timer causing an interrupt
+*  @note
+*     tmrHw_clearIntrrupt() must be called with a valid timer id after calling this function
+*/
+/****************************************************************************/
+tmrHw_ID_t tmrHw_getInterruptSource(void	/*  void */
+) {
+	int i;
+
+	for (i = 0; i < tmrHw_TIMER_NUM_COUNT; i++) {
+		if (pTmrHw[i].InterruptStatus) {
+			return i;
+		}
+	}
+
+	return 0xFFFFFFFF;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Displays specific timer registers
+*
+*
+*  @return  void
+*
+*/
+/****************************************************************************/
+void tmrHw_printDebugInfo(tmrHw_ID_t timerId,	/*  [ IN ] Timer id */
+			  int (*fpPrint) (const char *, ...)	/*  [ IN ] Print callback function */
+) {
+	(*fpPrint) ("Displaying register contents \n\n");
+	(*fpPrint) ("Timer %d: Load value              0x%X\n", timerId,
+		    pTmrHw[timerId].LoadValue);
+	(*fpPrint) ("Timer %d: Background load value   0x%X\n", timerId,
+		    pTmrHw[timerId].BackgroundLoad);
+	(*fpPrint) ("Timer %d: Control                 0x%X\n", timerId,
+		    pTmrHw[timerId].Control);
+	(*fpPrint) ("Timer %d: Interrupt clear         0x%X\n", timerId,
+		    pTmrHw[timerId].InterruptClear);
+	(*fpPrint) ("Timer %d: Interrupt raw interrupt 0x%X\n", timerId,
+		    pTmrHw[timerId].RawInterruptStatus);
+	(*fpPrint) ("Timer %d: Interrupt status        0x%X\n", timerId,
+		    pTmrHw[timerId].InterruptStatus);
+}
+
+/****************************************************************************/
+/**
+*  @brief   Use a timer to perform a busy wait delay for a number of usecs.
+*
+*  @return   N/A
+*/
+/****************************************************************************/
+void tmrHw_udelay(tmrHw_ID_t timerId,	/*  [ IN ] Timer id */
+		  unsigned long usecs /*  [ IN ] usec to delay */
+) {
+	tmrHw_RATE_t usec_tick_rate;
+	tmrHw_COUNT_t start_time;
+	tmrHw_COUNT_t delta_time;
+
+	start_time = tmrHw_GetCurrentCount(timerId);
+	usec_tick_rate = tmrHw_divide(tmrHw_getCountRate(timerId), 1000000);
+	delta_time = usecs * usec_tick_rate;
+
+	/* Busy wait */
+	while (delta_time > (tmrHw_GetCurrentCount(timerId) - start_time))
+		;
+}
+
+/****************************************************************************/
+/**
+*  @brief   Local Divide function
+*
+*  This function does the divide
+*
+*  @return divide value
+*
+*/
+/****************************************************************************/
+static int tmrHw_divide(int num, int denom)
+{
+	int r;
+	int t = 1;
+
+	/* Shift denom and t up to the largest value to optimize algorithm */
+	/* t contains the units of each divide */
+	while ((denom & 0x40000000) == 0) {	/* fails if denom=0 */
+		denom = denom << 1;
+		t = t << 1;
+	}
+
+	/* Intialize the result */
+	r = 0;
+
+	do {
+		/* Determine if there exists a positive remainder */
+		if ((num - denom) >= 0) {
+			/* Accumlate t to the result and calculate a new remainder */
+			num = num - denom;
+			r = r + t;
+		}
+		/* Continue to shift denom and shift t down to 0 */
+		denom = denom >> 1;
+		t = t >> 1;
+	} while (t != 0);
+	return r;
+}
diff --git a/arch/arm/mach-bcmring/include/csp/tmrHw.h b/arch/arm/mach-bcmring/include/csp/tmrHw.h
new file mode 100644
index 00000000000..f1236d00cb9
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/tmrHw.h
@@ -0,0 +1,263 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    tmrHw.h
+*
+*  @brief   API definitions for low level Timer driver
+*
+*/
+/****************************************************************************/
+#ifndef _TMRHW_H
+#define _TMRHW_H
+
+#include <csp/stdint.h>
+
+typedef uint32_t tmrHw_ID_t;	/* Timer ID */
+typedef uint32_t tmrHw_COUNT_t;	/* Timer count */
+typedef uint32_t tmrHw_INTERVAL_t;	/* Timer interval */
+typedef uint32_t tmrHw_RATE_t;	/* Timer event (count/interrupt) rate */
+
+typedef enum {
+	tmrHw_INTERRUPT_STATUS_SET,	/* Interrupted  */
+	tmrHw_INTERRUPT_STATUS_UNSET	/* No Interrupt */
+} tmrHw_INTERRUPT_STATUS_e;
+
+typedef enum {
+	tmrHw_CAPABILITY_CLOCK,	/* Clock speed in HHz */
+	tmrHw_CAPABILITY_RESOLUTION	/* Timer resolution in bits */
+} tmrHw_CAPABILITY_e;
+
+/****************************************************************************/
+/**
+*  @brief   Get timer capability
+*
+*  This function returns various capabilities/attributes of a timer
+*
+*  @return  Numeric capability
+*
+*/
+/****************************************************************************/
+uint32_t tmrHw_getTimerCapability(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
+				  tmrHw_CAPABILITY_e capability	/*  [ IN ] Timer capability */
+);
+
+/****************************************************************************/
+/**
+*  @brief   Configures a periodic timer in terms of timer interrupt rate
+*
+*  This function initializes a periodic timer to generate specific number of
+*  timer interrupt per second
+*
+*  @return   On success: Effective timer frequency
+*            On failure: 0
+*
+*/
+/****************************************************************************/
+tmrHw_RATE_t tmrHw_setPeriodicTimerRate(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
+					tmrHw_RATE_t rate	/*  [ IN ] Number of timer interrupt per second */
+);
+
+/****************************************************************************/
+/**
+*  @brief   Configures a periodic timer to generate timer interrupt after
+*           certain time interval
+*
+*  This function initializes a periodic timer to generate timer interrupt
+*  after every time interval in milisecond
+*
+*  @return   On success: Effective interval set in mili-second
+*            On failure: 0
+*
+*/
+/****************************************************************************/
+tmrHw_INTERVAL_t tmrHw_setPeriodicTimerInterval(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
+						tmrHw_INTERVAL_t msec	/*  [ IN ] Interval in mili-second */
+);
+
+/****************************************************************************/
+/**
+*  @brief   Configures a periodic timer to generate timer interrupt just once
+*           after certain time interval
+*
+*  This function initializes a periodic timer to generate a single ticks after
+*  certain time interval in milisecond
+*
+*  @return   On success: Effective interval set in mili-second
+*            On failure: 0
+*
+*/
+/****************************************************************************/
+tmrHw_INTERVAL_t tmrHw_setOneshotTimerInterval(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
+					       tmrHw_INTERVAL_t msec	/*  [ IN ] Interval in mili-second */
+);
+
+/****************************************************************************/
+/**
+*  @brief   Configures a timer to run as a free running timer
+*
+*  This function initializes a timer to run as a free running timer
+*
+*  @return   Timer resolution (count / sec)
+*
+*/
+/****************************************************************************/
+tmrHw_RATE_t tmrHw_setFreeRunningTimer(tmrHw_ID_t timerId,	/*  [ IN ] Timer Id */
+				       uint32_t divider	/*  [ IN ] Dividing the clock frequency */
+) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+*  @brief   Starts a timer
+*
+*  This function starts a preconfigured timer
+*
+*  @return  -1     - On Failure
+*            0     - On Success
+*/
+/****************************************************************************/
+int tmrHw_startTimer(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
+) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+*  @brief   Stops a timer
+*
+*  This function stops a running timer
+*
+*  @return  -1     - On Failure
+*            0     - On Success
+*/
+/****************************************************************************/
+int tmrHw_stopTimer(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
+);
+
+/****************************************************************************/
+/**
+*  @brief   Gets current timer count
+*
+*  This function returns the current timer value
+*
+*  @return  Current downcounting timer value
+*
+*/
+/****************************************************************************/
+tmrHw_COUNT_t tmrHw_GetCurrentCount(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
+) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+*  @brief   Gets timer count rate
+*
+*  This function returns the number of counts per second
+*
+*  @return  Count rate
+*
+*/
+/****************************************************************************/
+tmrHw_RATE_t tmrHw_getCountRate(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
+) __attribute__ ((section(".aramtext")));
+
+/****************************************************************************/
+/**
+*  @brief   Enables timer interrupt
+*
+*  This function enables the timer interrupt
+*
+*  @return   N/A
+*
+*/
+/****************************************************************************/
+void tmrHw_enableInterrupt(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
+);
+
+/****************************************************************************/
+/**
+*  @brief   Disables timer interrupt
+*
+*  This function disable the timer interrupt
+*
+*  @return   N/A
+*/
+/****************************************************************************/
+void tmrHw_disableInterrupt(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
+);
+
+/****************************************************************************/
+/**
+*  @brief   Clears the interrupt
+*
+*  This function clears the timer interrupt
+*
+*  @return   N/A
+*
+*  @note
+*     Must be called under the context of ISR
+*/
+/****************************************************************************/
+void tmrHw_clearInterrupt(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
+);
+
+/****************************************************************************/
+/**
+*  @brief   Gets the interrupt status
+*
+*  This function returns timer interrupt status
+*
+*  @return   Interrupt status
+*/
+/****************************************************************************/
+tmrHw_INTERRUPT_STATUS_e tmrHw_getInterruptStatus(tmrHw_ID_t timerId	/*  [ IN ] Timer id */
+);
+
+/****************************************************************************/
+/**
+*  @brief   Indentifies a timer causing interrupt
+*
+*  This functions returns a timer causing interrupt
+*
+*  @return  0xFFFFFFFF   : No timer causing an interrupt
+*           ! 0xFFFFFFFF : timer causing an interrupt
+*  @note
+*     tmrHw_clearIntrrupt() must be called with a valid timer id after calling this function
+*/
+/****************************************************************************/
+tmrHw_ID_t tmrHw_getInterruptSource(void);
+
+/****************************************************************************/
+/**
+*  @brief   Displays specific timer registers
+*
+*
+*  @return  void
+*
+*/
+/****************************************************************************/
+void tmrHw_printDebugInfo(tmrHw_ID_t timerId,	/*  [ IN ] Timer id */
+			  int (*fpPrint) (const char *, ...)	/*  [ IN ] Print callback function */
+);
+
+/****************************************************************************/
+/**
+*  @brief   Use a timer to perform a busy wait delay for a number of usecs.
+*
+*  @return   N/A
+*/
+/****************************************************************************/
+void tmrHw_udelay(tmrHw_ID_t timerId,	/*  [ IN ] Timer id */
+		  unsigned long usecs	/*  [ IN ] usec to delay */
+) __attribute__ ((section(".aramtext")));
+
+#endif /* _TMRHW_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/tmrHw_reg.h b/arch/arm/mach-bcmring/include/mach/csp/tmrHw_reg.h
new file mode 100644
index 00000000000..3080ac7239a
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/tmrHw_reg.h
@@ -0,0 +1,82 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    tmrHw_reg.h
+*
+*  @brief   Definitions for low level Timer registers
+*
+*/
+/****************************************************************************/
+#ifndef _TMRHW_REG_H
+#define _TMRHW_REG_H
+
+#include <mach/csp/mm_io.h>
+#include <mach/csp/hw_cfg.h>
+/* Base address */
+#define tmrHw_MODULE_BASE_ADDR          MM_IO_BASE_TMR
+
+/*
+This platform has four different timers running at different clock speed
+
+Timer one   (Timer ID 0) runs at  25 MHz
+Timer two   (Timer ID 1) runs at  25 MHz
+Timer three (Timer ID 2) runs at 150 MHz
+Timer four  (Timer ID 3) runs at 150 MHz
+*/
+#define tmrHw_LOW_FREQUENCY_MHZ         25	/* Always 25MHz from XTAL */
+#define tmrHw_LOW_FREQUENCY_HZ          25000000
+
+#if defined(CFG_GLOBAL_CHIP) && (CFG_GLOBAL_CHIP == FPGA11107)
+#define tmrHw_HIGH_FREQUENCY_MHZ        150	/* Always 150MHz for FPGA */
+#define tmrHw_HIGH_FREQUENCY_HZ         150000000
+#else
+#define tmrHw_HIGH_FREQUENCY_HZ         HW_CFG_BUS_CLK_HZ
+#define tmrHw_HIGH_FREQUENCY_MHZ        (HW_CFG_BUS_CLK_HZ / 1000000)
+#endif
+
+#define tmrHw_LOW_RESOLUTION_CLOCK      tmrHw_LOW_FREQUENCY_HZ
+#define tmrHw_HIGH_RESOLUTION_CLOCK     tmrHw_HIGH_FREQUENCY_HZ
+#define tmrHw_MAX_COUNT                 (0xFFFFFFFF)	/* maximum number of count a timer can count */
+#define tmrHw_TIMER_NUM_COUNT           (4)	/* Number of timer module supported */
+
+typedef struct {
+	uint32_t LoadValue;	/* Load value for timer */
+	uint32_t CurrentValue;	/* Current value for timer */
+	uint32_t Control;	/* Control register */
+	uint32_t InterruptClear;	/* Interrupt clear register */
+	uint32_t RawInterruptStatus;	/* Raw interrupt status */
+	uint32_t InterruptStatus;	/* Masked interrupt status */
+	uint32_t BackgroundLoad;	/* Background load value */
+	uint32_t padding;	/* Padding register */
+} tmrHw_REG_t;
+
+/* Control bot masks */
+#define tmrHw_CONTROL_TIMER_ENABLE            0x00000080
+#define tmrHw_CONTROL_PERIODIC                0x00000040
+#define tmrHw_CONTROL_INTERRUPT_ENABLE        0x00000020
+#define tmrHw_CONTROL_PRESCALE_MASK           0x0000000C
+#define tmrHw_CONTROL_PRESCALE_1              0x00000000
+#define tmrHw_CONTROL_PRESCALE_16             0x00000004
+#define tmrHw_CONTROL_PRESCALE_256            0x00000008
+#define tmrHw_CONTROL_32BIT                   0x00000002
+#define tmrHw_CONTROL_ONESHOT                 0x00000001
+#define tmrHw_CONTROL_FREE_RUNNING            0x00000000
+
+#define tmrHw_CONTROL_MODE_MASK               (tmrHw_CONTROL_PERIODIC | tmrHw_CONTROL_ONESHOT)
+
+#define pTmrHw ((volatile tmrHw_REG_t *)tmrHw_MODULE_BASE_ADDR)
+
+#endif /* _TMRHW_REG_H */
-- 
cgit v1.2.3


From a364143127a3155153f3e93d47cfc0f99a6f1858 Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Fri, 7 Aug 2009 20:10:24 +0100
Subject: ARM: 5661/1: bcmring: add csp security hardware headers

add csp security hardware headers

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-bcmring/include/csp/secHw.h          |  65 ++++++++++++++
 arch/arm/mach-bcmring/include/mach/csp/secHw_def.h | 100 +++++++++++++++++++++
 .../mach-bcmring/include/mach/csp/secHw_inline.h   |  79 ++++++++++++++++
 3 files changed, 244 insertions(+)
 create mode 100644 arch/arm/mach-bcmring/include/csp/secHw.h
 create mode 100644 arch/arm/mach-bcmring/include/mach/csp/secHw_def.h
 create mode 100644 arch/arm/mach-bcmring/include/mach/csp/secHw_inline.h

(limited to 'arch')

diff --git a/arch/arm/mach-bcmring/include/csp/secHw.h b/arch/arm/mach-bcmring/include/csp/secHw.h
new file mode 100644
index 00000000000..b9d7e0732df
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/csp/secHw.h
@@ -0,0 +1,65 @@
+/*****************************************************************************
+* Copyright 2004 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    secHw.h
+*
+*  @brief   Definitions for accessing low level security features
+*
+*/
+/****************************************************************************/
+#ifndef SECHW_H
+#define SECHW_H
+
+typedef void (*secHw_FUNC_t) (void);
+
+typedef enum {
+	secHw_MODE_SECURE = 0x0,	/* Switches processor into secure mode */
+	secHw_MODE_NONSECURE = 0x1	/* Switches processor into non-secure mode */
+} secHw_MODE;
+
+/****************************************************************************/
+/**
+*  @brief   Requesting to execute the function in secure mode
+*
+*  This function requests the given function to run in secure mode
+*
+*/
+/****************************************************************************/
+void secHw_RunSecure(secHw_FUNC_t	/* Function to run in secure mode */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Sets the  mode
+*
+*  his function sets the processor mode (secure/non-secure)
+*
+*/
+/****************************************************************************/
+void secHw_SetMode(secHw_MODE	/* Processor mode */
+    );
+
+/****************************************************************************/
+/**
+*  @brief   Get the current mode
+*
+*  This function retieves the processor mode (secure/non-secure)
+*
+*/
+/****************************************************************************/
+void secHw_GetMode(secHw_MODE *);
+
+#endif /* SECHW_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/secHw_def.h b/arch/arm/mach-bcmring/include/mach/csp/secHw_def.h
new file mode 100644
index 00000000000..d15f5f3ec2d
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/secHw_def.h
@@ -0,0 +1,100 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    secHw_def.h
+*
+*  @brief   Definitions for configuring/testing secure blocks
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+
+#ifndef SECHW_DEF_H
+#define SECHW_DEF_H
+
+#include <mach/csp/mm_io.h>
+
+/* Bit mask for various secure device */
+#define secHw_BLK_MASK_CHIP_CONTROL     0x00000001
+#define secHw_BLK_MASK_KEY_SCAN         0x00000002
+#define secHw_BLK_MASK_TOUCH_SCREEN     0x00000004
+#define secHw_BLK_MASK_UART0            0x00000008
+#define secHw_BLK_MASK_UART1            0x00000010
+#define secHw_BLK_MASK_WATCHDOG         0x00000020
+#define secHw_BLK_MASK_SPUM             0x00000040
+#define secHw_BLK_MASK_DDR2             0x00000080
+#define secHw_BLK_MASK_EXT_MEM          0x00000100
+#define secHw_BLK_MASK_ESW              0x00000200
+#define secHw_BLK_MASK_SPU              0x00010000
+#define secHw_BLK_MASK_PKA              0x00020000
+#define secHw_BLK_MASK_RNG              0x00040000
+#define secHw_BLK_MASK_RTC              0x00080000
+#define secHw_BLK_MASK_OTP              0x00100000
+#define secHw_BLK_MASK_BOOT             0x00200000
+#define secHw_BLK_MASK_MPU              0x00400000
+#define secHw_BLK_MASK_TZCTRL           0x00800000
+#define secHw_BLK_MASK_INTR             0x01000000
+
+/* Trustzone register set */
+typedef struct {
+	volatile uint32_t status;	/* read only - reflects status of writes of 2 write registers */
+	volatile uint32_t setUnsecure;	/* write only. reads back as 0 */
+	volatile uint32_t setSecure;	/* write only. reads back as 0 */
+} secHw_TZREG_t;
+
+/* There are 2 register sets. The first is for the lower 16 bits, the 2nd */
+/* is for the higher 16 bits. */
+
+typedef enum {
+	secHw_IDX_LS = 0,
+	secHw_IDX_MS = 1,
+	secHw_IDX_NUM
+} secHw_IDX_e;
+
+typedef struct {
+	volatile secHw_TZREG_t reg[secHw_IDX_NUM];
+} secHw_REGS_t;
+
+/****************************************************************************/
+/**
+*  @brief  Configures a device as a secure device
+*
+*/
+/****************************************************************************/
+static inline void secHw_setSecure(uint32_t mask	/*  mask of type secHw_BLK_MASK_XXXXXX */
+    );
+
+/****************************************************************************/
+/**
+*  @brief  Configures a device as a non-secure device
+*
+*/
+/****************************************************************************/
+static inline void secHw_setUnsecure(uint32_t mask	/*  mask of type secHw_BLK_MASK_XXXXXX */
+    );
+
+/****************************************************************************/
+/**
+*  @brief  Get the trustzone status for all components. 1 = non-secure, 0 = secure
+*
+*/
+/****************************************************************************/
+static inline uint32_t secHw_getStatus(void);
+
+#include <mach/csp/secHw_inline.h>
+
+#endif /* SECHW_DEF_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/secHw_inline.h b/arch/arm/mach-bcmring/include/mach/csp/secHw_inline.h
new file mode 100644
index 00000000000..9cd6a032ab7
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/csp/secHw_inline.h
@@ -0,0 +1,79 @@
+/*****************************************************************************
+* Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/****************************************************************************/
+/**
+*  @file    secHw_inline.h
+*
+*  @brief   Definitions for configuring/testing secure blocks
+*
+*  @note
+*     None
+*/
+/****************************************************************************/
+
+#ifndef SECHW_INLINE_H
+#define SECHW_INLINE_H
+
+/****************************************************************************/
+/**
+*  @brief  Configures a device as a secure device
+*
+*/
+/****************************************************************************/
+static inline void secHw_setSecure(uint32_t mask	/*  mask of type secHw_BLK_MASK_XXXXXX */
+    ) {
+	secHw_REGS_t *regp = (secHw_REGS_t *) MM_IO_BASE_TZPC;
+
+	if (mask & 0x0000FFFF) {
+		regp->reg[secHw_IDX_LS].setSecure = mask & 0x0000FFFF;
+	}
+
+	if (mask & 0xFFFF0000) {
+		regp->reg[secHw_IDX_MS].setSecure = mask >> 16;
+	}
+}
+
+/****************************************************************************/
+/**
+*  @brief  Configures a device as a non-secure device
+*
+*/
+/****************************************************************************/
+static inline void secHw_setUnsecure(uint32_t mask	/*  mask of type secHw_BLK_MASK_XXXXXX */
+    ) {
+	secHw_REGS_t *regp = (secHw_REGS_t *) MM_IO_BASE_TZPC;
+
+	if (mask & 0x0000FFFF) {
+		regp->reg[secHw_IDX_LS].setUnsecure = mask & 0x0000FFFF;
+	}
+	if (mask & 0xFFFF0000) {
+		regp->reg[secHw_IDX_MS].setUnsecure = mask >> 16;
+	}
+}
+
+/****************************************************************************/
+/**
+*  @brief  Get the trustzone status for all components. 1 = non-secure, 0 = secure
+*
+*/
+/****************************************************************************/
+static inline uint32_t secHw_getStatus(void)
+{
+	secHw_REGS_t *regp = (secHw_REGS_t *) MM_IO_BASE_TZPC;
+
+	return (regp->reg[1].status << 16) + regp->reg[0].status;
+}
+
+#endif /* SECHW_INLINE_H */
-- 
cgit v1.2.3


From bc5739005f9c0585d21c78f61e9d7965f97b2109 Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Fri, 7 Aug 2009 20:04:17 +0100
Subject: ARM: 5653/1: bcmring: add Makefile of csp code

add Makefile of csp code

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-bcmring/csp/Makefile | 3 +++
 1 file changed, 3 insertions(+)
 create mode 100644 arch/arm/mach-bcmring/csp/Makefile

(limited to 'arch')

diff --git a/arch/arm/mach-bcmring/csp/Makefile b/arch/arm/mach-bcmring/csp/Makefile
new file mode 100644
index 00000000000..648c0377530
--- /dev/null
+++ b/arch/arm/mach-bcmring/csp/Makefile
@@ -0,0 +1,3 @@
+obj-y += dmac/
+obj-y += tmr/
+obj-y += chipc/
-- 
cgit v1.2.3


From 831f1f73a6e1a0a02a5eaa2da5f49cf09c7bb1af Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Fri, 7 Aug 2009 19:46:49 +0100
Subject: ARM: 5642/1: bcmring: add Makefile/Kconfig/Makefile.boot in
 mach-bcmring

add arch/arm/mach-bcmring directory

add Kconfig, Makefile, and Makefile.boot in mach-bcmring

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-bcmring/Kconfig       | 21 +++++++++++++++++++++
 arch/arm/mach-bcmring/Makefile      |  8 ++++++++
 arch/arm/mach-bcmring/Makefile.boot |  6 ++++++
 3 files changed, 35 insertions(+)
 create mode 100644 arch/arm/mach-bcmring/Kconfig
 create mode 100644 arch/arm/mach-bcmring/Makefile
 create mode 100644 arch/arm/mach-bcmring/Makefile.boot

(limited to 'arch')

diff --git a/arch/arm/mach-bcmring/Kconfig b/arch/arm/mach-bcmring/Kconfig
new file mode 100644
index 00000000000..457b4384913
--- /dev/null
+++ b/arch/arm/mach-bcmring/Kconfig
@@ -0,0 +1,21 @@
+choice
+	prompt "Processor selection in BCMRING family of devices"
+	depends on ARCH_BCMRING
+	default ARCH_BCM11107
+
+config ARCH_FPGA11107
+	bool "FPGA11107"
+
+config ARCH_BCM11107
+	bool "BCM11107"
+endchoice
+
+menu "BCMRING Options"
+	depends on ARCH_BCMRING
+
+config BCM_ZRELADDR
+	hex "Compressed ZREL ADDR"
+
+endmenu
+
+# source "drivers/char/bcmring/Kconfig"
diff --git a/arch/arm/mach-bcmring/Makefile b/arch/arm/mach-bcmring/Makefile
new file mode 100644
index 00000000000..f8d9fcedf91
--- /dev/null
+++ b/arch/arm/mach-bcmring/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for the linux kernel.
+#
+
+# Object file lists.
+
+obj-y := arch.o mm.o irq.o clock.o core.o timer.o dma.o
+obj-y += csp/
diff --git a/arch/arm/mach-bcmring/Makefile.boot b/arch/arm/mach-bcmring/Makefile.boot
new file mode 100644
index 00000000000..fb53b283beb
--- /dev/null
+++ b/arch/arm/mach-bcmring/Makefile.boot
@@ -0,0 +1,6 @@
+# Address where decompressor will be written and eventually executed.
+#
+# default to SDRAM
+zreladdr-y      := $(CONFIG_BCM_ZRELADDR)
+params_phys-y   := 0x00000800
+
-- 
cgit v1.2.3


From 6288e28dce9bae24068b7341ebd72a7d176a3539 Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Fri, 7 Aug 2009 19:46:15 +0100
Subject: ARM: 5641/1: bcmring: add Kconfig and Makefile entries in arch/arm

add bcmring option in Kconfig and add entry in Makefile
in arch/arm directory

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/Kconfig  | 14 ++++++++++++++
 arch/arm/Makefile |  1 +
 2 files changed, 15 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index aef63c8e3d2..c6d2b198875 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -637,6 +637,18 @@ config ARCH_OMAP
 	help
 	  Support for TI's OMAP platform (OMAP1 and OMAP2).
 
+config ARCH_BCMRING
+	bool "Broadcom BCMRING"
+	depends on MMU
+	select CPU_V6
+	select ARM_AMBA
+	select COMMON_CLKDEV
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+	select ARCH_WANT_OPTIONAL_GPIOLIB
+	help
+	  Support for Broadcom's BCMRing platform.
+
 endchoice
 
 source "arch/arm/mach-clps711x/Kconfig"
@@ -730,6 +742,8 @@ source "arch/arm/mach-u300/Kconfig"
 
 source "arch/arm/mach-w90x900/Kconfig"
 
+source "arch/arm/mach-bcmring/Kconfig"
+
 # Definitions to make life easier
 config ARCH_ACORN
 	bool
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index c877d6df23d..b9ae98b88a7 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -112,6 +112,7 @@ endif
 # by CONFIG_* macro name.
 machine-$(CONFIG_ARCH_AAEC2000)		:= aaec2000
 machine-$(CONFIG_ARCH_AT91)		:= at91
+machine-$(CONFIG_ARCH_BCMRING)		:= bcmring
 machine-$(CONFIG_ARCH_CLPS711X)		:= clps711x
 machine-$(CONFIG_ARCH_DAVINCI)		:= davinci
 machine-$(CONFIG_ARCH_EBSA110)		:= ebsa110
-- 
cgit v1.2.3


From 7f33527f547161f5ddc05c252c81617b8de93f21 Mon Sep 17 00:00:00 2001
From: Leo Chen <leochen@broadcom.com>
Date: Wed, 12 Aug 2009 22:07:26 +0100
Subject: ARM: 5670/1: bcmring: add default configuration for bcmring arch

add default configuration for bcmring arch

Signed-off-by: Leo Chen <leochen@broadcom.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/configs/bcmring_defconfig | 725 +++++++++++++++++++++++++++++++++++++
 1 file changed, 725 insertions(+)
 create mode 100644 arch/arm/configs/bcmring_defconfig

(limited to 'arch')

diff --git a/arch/arm/configs/bcmring_defconfig b/arch/arm/configs/bcmring_defconfig
new file mode 100644
index 00000000000..bcc0bac551a
--- /dev/null
+++ b/arch/arm/configs/bcmring_defconfig
@@ -0,0 +1,725 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.31-rc3
+# Fri Jul 17 12:07:28 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+# CONFIG_ELF_CORE is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+CONFIG_SHMEM=y
+# CONFIG_AIO is not set
+
+#
+# Performance Counters
+#
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+CONFIG_ARCH_BCMRING=y
+# CONFIG_ARCH_FPGA11107 is not set
+CONFIG_ARCH_BCM11107=y
+
+#
+# BCMRING Options
+#
+CONFIG_BCM_ZRELADDR=0x8000
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_V6=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_32v6=y
+CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+# CONFIG_ARM_ERRATA_411920 is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+CONFIG_ARM_AMBA=y
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+CONFIG_UACCESS_WITH_MEMCPY=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0e000000
+CONFIG_ZBOOT_ROM_BSS=0x0ea00000
+CONFIG_ZBOOT_ROM=y
+CONFIG_CMDLINE=""
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+# CONFIG_UNIX is not set
+# CONFIG_NET_KEY is not set
+# CONFIG_INET is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+# CONFIG_MTD_CFI_I2 is not set
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+CONFIG_MTD_NAND_BCM_UMI=y
+CONFIG_MTD_NAND_BCM_UMI_HWCS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_NETDEVICES is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+# CONFIG_CONSOLE_TRANSLATIONS is not set
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_AMBA_PL010 is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=64
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_FILE_LOCKING is not set
+# CONFIG_FSNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+# CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_FS_XATTR=y
+CONFIG_JFFS2_FS_POSIX_ACL=y
+# CONFIG_JFFS2_FS_SECURITY is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+CONFIG_HEADERS_CHECK=y
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_BUILD_DOCSRC is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_ARM_UNWIND is not set
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
-- 
cgit v1.2.3


From ff54b4578448d616eb177e216acd599ecf5ee5b1 Mon Sep 17 00:00:00 2001
From: Byungho Min <bhminjames@gmail.com>
Date: Tue, 23 Jun 2009 21:39:49 +0900
Subject: ARM: S5PC100: Memory map

S5PC100's the physical IO space starts at 0xe000"0000. To maximize space for
vmalloc, the virtual IO space starts at 0xf400"0000 as same as other samsung
CPUs(s3c24xx and s3c64xx) do.

Signed-off-by: Byungho Min <bhmin@samsung.com>
[ben-linux@fluff.org: subject and description fixup]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s5pc100/include/mach/map.h    | 75 +++++++++++++++++++++++++++++
 arch/arm/mach-s5pc100/include/mach/memory.h | 18 +++++++
 2 files changed, 93 insertions(+)
 create mode 100644 arch/arm/mach-s5pc100/include/mach/map.h
 create mode 100644 arch/arm/mach-s5pc100/include/mach/memory.h

(limited to 'arch')

diff --git a/arch/arm/mach-s5pc100/include/mach/map.h b/arch/arm/mach-s5pc100/include/mach/map.h
new file mode 100644
index 00000000000..9e9f39130b2
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/map.h
@@ -0,0 +1,75 @@
+/* linux/arch/arm/mach-s5pc100/include/mach/map.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *	Byungho Min <bhmin@samsung.com>
+ *
+ * Based on mach-s3c6400/include/mach/map.h
+ *
+ * S5PC1XX - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MAP_H
+#define __ASM_ARCH_MAP_H __FILE__
+
+#include <plat/map-base.h>
+
+
+/* Chip ID */
+#define S5PC100_PA_CHIPID	(0xE0000000)
+#define S5PC1XX_PA_CHIPID	S5PC100_PA_CHIPID
+#define S5PC1XX_VA_CHIPID	S3C_VA_SYS
+
+/* System */
+#define S5PC100_PA_SYS		(0xE0100000)
+#define S5PC100_PA_CLK		(S5PC100_PA_SYS + 0x0)
+#define S5PC100_PA_PWR		(S5PC100_PA_SYS + 0x8000)
+#define S5PC1XX_PA_CLK		S5PC100_PA_CLK
+#define S5PC1XX_PA_PWR		S5PC100_PA_PWR
+#define S5PC1XX_VA_CLK		(S3C_VA_SYS + 0x10000)
+#define S5PC1XX_VA_PWR		(S3C_VA_SYS + 0x20000)
+
+/* Interrupt */
+#define S5PC100_PA_VIC		(0xE4000000)
+#define S5PC100_VA_VIC		S3C_VA_IRQ
+#define S5PC100_PA_VIC_OFFSET	0x100000
+#define S5PC100_VA_VIC_OFFSET	0x10000
+#define S5PC1XX_PA_VIC(x)	(S5PC100_PA_VIC + ((x) * S5PC100_PA_VIC_OFFSET))
+#define S5PC1XX_VA_VIC(x)	(S5PC100_VA_VIC + ((x) * S5PC100_VA_VIC_OFFSET))
+
+/* Timer */
+#define S5PC100_PA_TIMER	(0xEA000000)
+#define S5PC1XX_PA_TIMER	S5PC100_PA_TIMER
+#define S5PC1XX_VA_TIMER	S3C_VA_TIMER
+
+/* UART */
+#define S5PC100_PA_UART		(0xEC000000)
+#define S5PC1XX_PA_UART		S5PC100_PA_UART
+#define S5PC1XX_VA_UART		S3C_VA_UART
+
+/* IIC */
+#define S5PC100_PA_IIC		(0xEC100000)
+
+/* ETC */
+#define S5PC100_PA_SDRAM	(0x20000000)
+
+/* compatibility defines. */
+#define S3C_PA_UART		S5PC100_PA_UART
+#define S3C_PA_UART0		(S5PC100_PA_UART + 0x0)
+#define S3C_PA_UART1		(S5PC100_PA_UART + 0x400)
+#define S3C_PA_UART2		(S5PC100_PA_UART + 0x800)
+#define S3C_PA_UART3		(S5PC100_PA_UART + 0xC00)
+#define S3C_VA_UART0		(S3C_VA_UART + 0x0)
+#define S3C_VA_UART1		(S3C_VA_UART + 0x400)
+#define S3C_VA_UART2		(S3C_VA_UART + 0x800)
+#define S3C_VA_UART3		(S3C_VA_UART + 0xC00)
+#define S3C_UART_OFFSET		0x400
+#define S3C_VA_VIC0		(S3C_VA_IRQ + 0x0)
+#define S3C_VA_VIC1		(S3C_VA_IRQ + 0x10000)
+#define S3C_VA_VIC2		(S3C_VA_IRQ + 0x20000)
+#define S3C_PA_IIC		S5PC100_PA_IIC
+
+#endif /* __ASM_ARCH_C100_MAP_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/memory.h b/arch/arm/mach-s5pc100/include/mach/memory.h
new file mode 100644
index 00000000000..4b60d18179f
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/memory.h
@@ -0,0 +1,18 @@
+/* arch/arm/mach-s5pc100/include/mach/memory.h
+ *
+ * Copyright 2008 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * Based on mach-s3c6400/include/mach/memory.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET     	UL(0x20000000)
+
+#endif
-- 
cgit v1.2.3


From 433a915fc6456ee3a4b740fe4d92caa78164fdce Mon Sep 17 00:00:00 2001
From: Byungho Min <bhminjames@gmail.com>
Date: Tue, 23 Jun 2009 21:40:09 +0900
Subject: ARM: S5PC100: UART and Serial

Serial driver of S5PC100 is the same as S3C6400, so S5PC100 shares the serial
driver with S3C6400. Uart driver is copied from plat-s3c64xx to plat-s5pc1xx,
as I do not use plat-s3c64xx directory.

Signed-off-by: Byungho Min <bhmin@samsung.com>
[ben-linux@fluff.org: title fixup]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s5pc1xx/dev-uart.c | 174 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 174 insertions(+)
 create mode 100644 arch/arm/plat-s5pc1xx/dev-uart.c

(limited to 'arch')

diff --git a/arch/arm/plat-s5pc1xx/dev-uart.c b/arch/arm/plat-s5pc1xx/dev-uart.c
new file mode 100644
index 00000000000..f749bc5407b
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/dev-uart.c
@@ -0,0 +1,174 @@
+/* linux/arch/arm/plat-s5pc1xx/dev-uart.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *	Byungho Min <bhmin@samsung.com>
+ *
+ * Based on plat-s3c64xx/dev-uart.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <plat/devs.h>
+
+/* Serial port registrations */
+
+/* 64xx uarts are closer together */
+
+static struct resource s5pc1xx_uart0_resource[] = {
+	[0] = {
+		.start	= S3C_PA_UART0,
+		.end	= S3C_PA_UART0 + 0x100,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_S3CUART_RX0,
+		.end	= IRQ_S3CUART_RX0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= IRQ_S3CUART_TX0,
+		.end	= IRQ_S3CUART_TX0,
+		.flags	= IORESOURCE_IRQ,
+
+	},
+	[3] = {
+		.start	= IRQ_S3CUART_ERR0,
+		.end	= IRQ_S3CUART_ERR0,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static struct resource s5pc1xx_uart1_resource[] = {
+	[0] = {
+		.start = S3C_PA_UART1,
+		.end   = S3C_PA_UART1 + 0x100,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_S3CUART_RX1,
+		.end	= IRQ_S3CUART_RX1,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= IRQ_S3CUART_TX1,
+		.end	= IRQ_S3CUART_TX1,
+		.flags	= IORESOURCE_IRQ,
+
+	},
+	[3] = {
+		.start	= IRQ_S3CUART_ERR1,
+		.end	= IRQ_S3CUART_ERR1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource s5pc1xx_uart2_resource[] = {
+	[0] = {
+		.start = S3C_PA_UART2,
+		.end   = S3C_PA_UART2 + 0x100,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_S3CUART_RX2,
+		.end	= IRQ_S3CUART_RX2,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= IRQ_S3CUART_TX2,
+		.end	= IRQ_S3CUART_TX2,
+		.flags	= IORESOURCE_IRQ,
+
+	},
+	[3] = {
+		.start	= IRQ_S3CUART_ERR2,
+		.end	= IRQ_S3CUART_ERR2,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource s5pc1xx_uart3_resource[] = {
+	[0] = {
+		.start = S3C_PA_UART3,
+		.end   = S3C_PA_UART3 + 0x100,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_S3CUART_RX3,
+		.end	= IRQ_S3CUART_RX3,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= IRQ_S3CUART_TX3,
+		.end	= IRQ_S3CUART_TX3,
+		.flags	= IORESOURCE_IRQ,
+
+	},
+	[3] = {
+		.start	= IRQ_S3CUART_ERR3,
+		.end	= IRQ_S3CUART_ERR3,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+
+struct s3c24xx_uart_resources s5pc1xx_uart_resources[] __initdata = {
+	[0] = {
+		.resources	= s5pc1xx_uart0_resource,
+		.nr_resources	= ARRAY_SIZE(s5pc1xx_uart0_resource),
+	},
+	[1] = {
+		.resources	= s5pc1xx_uart1_resource,
+		.nr_resources	= ARRAY_SIZE(s5pc1xx_uart1_resource),
+	},
+	[2] = {
+		.resources	= s5pc1xx_uart2_resource,
+		.nr_resources	= ARRAY_SIZE(s5pc1xx_uart2_resource),
+	},
+	[3] = {
+		.resources	= s5pc1xx_uart3_resource,
+		.nr_resources	= ARRAY_SIZE(s5pc1xx_uart3_resource),
+	},
+};
+
+/* uart devices */
+
+static struct platform_device s3c24xx_uart_device0 = {
+	.id		= 0,
+};
+
+static struct platform_device s3c24xx_uart_device1 = {
+	.id		= 1,
+};
+
+static struct platform_device s3c24xx_uart_device2 = {
+	.id		= 2,
+};
+
+static struct platform_device s3c24xx_uart_device3 = {
+	.id		= 3,
+};
+
+struct platform_device *s3c24xx_uart_src[4] = {
+	&s3c24xx_uart_device0,
+	&s3c24xx_uart_device1,
+	&s3c24xx_uart_device2,
+	&s3c24xx_uart_device3,
+};
+
+struct platform_device *s3c24xx_uart_devs[4] = {
+};
+
-- 
cgit v1.2.3


From 8acd1ade2ede18408303c968e1449220c427a182 Mon Sep 17 00:00:00 2001
From: Byungho Min <bhminjames@gmail.com>
Date: Tue, 23 Jun 2009 21:40:15 +0900
Subject: ARM: S5PC100: CPU initialization

Signed-off-by: Byungho Min <bhmin@samsung.com>
[ben-linux@fluff.org: subject fixup]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s5pc100/cpu.c                      |  97 ++++++++++++++++++++
 arch/arm/mach-s5pc100/include/mach/debug-macro.S |  38 ++++++++
 arch/arm/mach-s5pc100/include/mach/entry-macro.S |  50 ++++++++++
 arch/arm/mach-s5pc100/include/mach/hardware.h    |  14 +++
 arch/arm/mach-s5pc100/include/mach/system.h      |  24 +++++
 arch/arm/mach-s5pc100/include/mach/uncompress.h  |  28 ++++++
 arch/arm/plat-s5pc1xx/cpu.c                      | 112 +++++++++++++++++++++++
 arch/arm/plat-s5pc1xx/include/plat/s5pc100.h     |  65 +++++++++++++
 arch/arm/plat-s5pc1xx/s5pc100-init.c             |  27 ++++++
 9 files changed, 455 insertions(+)
 create mode 100644 arch/arm/mach-s5pc100/cpu.c
 create mode 100644 arch/arm/mach-s5pc100/include/mach/debug-macro.S
 create mode 100644 arch/arm/mach-s5pc100/include/mach/entry-macro.S
 create mode 100644 arch/arm/mach-s5pc100/include/mach/hardware.h
 create mode 100644 arch/arm/mach-s5pc100/include/mach/system.h
 create mode 100644 arch/arm/mach-s5pc100/include/mach/uncompress.h
 create mode 100644 arch/arm/plat-s5pc1xx/cpu.c
 create mode 100644 arch/arm/plat-s5pc1xx/include/plat/s5pc100.h
 create mode 100644 arch/arm/plat-s5pc1xx/s5pc100-init.c

(limited to 'arch')

diff --git a/arch/arm/mach-s5pc100/cpu.c b/arch/arm/mach-s5pc100/cpu.c
new file mode 100644
index 00000000000..0e718890da3
--- /dev/null
+++ b/arch/arm/mach-s5pc100/cpu.c
@@ -0,0 +1,97 @@
+/* linux/arch/arm/mach-s5pc100/cpu.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *	Byungho Min <bhmin@samsung.com>
+ *
+ * Based on mach-s3c6410/cpu.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+#include <asm/irq.h>
+
+#include <plat/cpu-freq.h>
+#include <plat/regs-serial.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/clock.h>
+#include <plat/sdhci.h>
+#include <plat/iic-core.h>
+#include <plat/s5pc100.h>
+
+/* Initial IO mappings */
+
+static struct map_desc s5pc100_iodesc[] __initdata = {
+};
+
+/* s5pc100_map_io
+ *
+ * register the standard cpu IO areas
+*/
+
+void __init s5pc100_map_io(void)
+{
+	iotable_init(s5pc100_iodesc, ARRAY_SIZE(s5pc100_iodesc));
+
+	/* initialise device information early */
+}
+
+void __init s5pc100_init_clocks(int xtal)
+{
+	printk(KERN_DEBUG "%s: initialising clocks\n", __func__);
+	s3c24xx_register_baseclocks(xtal);
+	s5pc1xx_register_clocks();
+	s5pc100_register_clocks();
+	s5pc100_setup_clocks();
+}
+
+void __init s5pc100_init_irq(void)
+{
+	u32 vic_valid[] = {~0, ~0, ~0};
+
+	/* VIC0, VIC1, and VIC2 are fully populated. */
+	s5pc1xx_init_irq(vic_valid, ARRAY_SIZE(vic_valid));
+}
+
+struct sysdev_class s5pc100_sysclass = {
+	.name	= "s5pc100-core",
+};
+
+static struct sys_device s5pc100_sysdev = {
+	.cls	= &s5pc100_sysclass,
+};
+
+static int __init s5pc100_core_init(void)
+{
+	return sysdev_class_register(&s5pc100_sysclass);
+}
+
+core_initcall(s5pc100_core_init);
+
+int __init s5pc100_init(void)
+{
+	printk(KERN_DEBUG "S5PC100: Initialising architecture\n");
+
+	return sysdev_register(&s5pc100_sysdev);
+}
diff --git a/arch/arm/mach-s5pc100/include/mach/debug-macro.S b/arch/arm/mach-s5pc100/include/mach/debug-macro.S
new file mode 100644
index 00000000000..9d142ccf654
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/debug-macro.S
@@ -0,0 +1,38 @@
+/* arch/arm/mach-s5pc100/include/mach/debug-macro.S
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *	Byungho Min <bhmin@samsung.com>
+ *
+ *
+ * Based on mach-s3c6400/include/mach/debug-macro.S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* pull in the relevant register and map files. */
+
+#include <mach/map.h>
+#include <plat/regs-serial.h>
+
+	/* note, for the boot process to work we have to keep the UART
+	 * virtual address aligned to an 1MiB boundary for the L1
+	 * mapping the head code makes. We keep the UART virtual address
+	 * aligned and add in the offset when we load the value here.
+	 */
+
+	.macro addruart, rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1
+		ldreq	\rx, = S3C_PA_UART
+		ldrne	\rx, = (S3C_VA_UART + S3C_PA_UART & 0xfffff)
+		add	\rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART)
+	.endm
+
+/* include the reset of the code which will do the work, we're only
+ * compiling for a single cpu processor type so the default of s3c2440
+ * will be fine with us.
+ */
+
+#include <plat/debug-macro.S>
diff --git a/arch/arm/mach-s5pc100/include/mach/entry-macro.S b/arch/arm/mach-s5pc100/include/mach/entry-macro.S
new file mode 100644
index 00000000000..67131939e62
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/entry-macro.S
@@ -0,0 +1,50 @@
+/* arch/arm/mach-s5pc100/include/mach/entry-macro.S
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *	Byungho Min <bhmin@samsung.com>
+ *
+ * Based on mach-s3c6400/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for the Samsung S5PC1XX series
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+*/
+
+#include <asm/hardware/vic.h>
+#include <mach/map.h>
+#include <plat/irqs.h>
+
+	.macro	disable_fiq
+	.endm
+
+	.macro	get_irqnr_preamble, base, tmp
+	ldr	\base, =S3C_VA_VIC0
+	.endm
+
+	.macro	arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+	@ check the vic0
+	mov	\irqnr, # S3C_IRQ_OFFSET + 31
+	ldr	\irqstat, [ \base, # VIC_IRQ_STATUS ]
+	teq	\irqstat, #0
+
+	@ otherwise try vic1
+	addeq	\tmp, \base, #(S3C_VA_VIC1 - S3C_VA_VIC0)
+	addeq	\irqnr, \irqnr, #32
+	ldreq	\irqstat, [ \tmp, # VIC_IRQ_STATUS ]
+	teqeq	\irqstat, #0
+
+	@ otherwise try vic2
+	addeq	\tmp, \base, #(S3C_VA_VIC2 - S3C_VA_VIC0)
+	addeq	\irqnr, \irqnr, #32
+	ldreq	\irqstat, [ \tmp, # VIC_IRQ_STATUS ]
+	teqeq	\irqstat, #0
+
+	clzne	\irqstat, \irqstat
+	subne	\irqnr, \irqnr, \irqstat
+	.endm
diff --git a/arch/arm/mach-s5pc100/include/mach/hardware.h b/arch/arm/mach-s5pc100/include/mach/hardware.h
new file mode 100644
index 00000000000..38ce8206a1a
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/hardware.h
@@ -0,0 +1,14 @@
+/* linux/arch/arm/mach-s5pc100/include/mach/hardware.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * S3C6400 - Hardware support
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H __FILE__
+
+/* currently nothing here, placeholder */
+
+#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/system.h b/arch/arm/mach-s5pc100/include/mach/system.h
new file mode 100644
index 00000000000..e3901437547
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/system.h
@@ -0,0 +1,24 @@
+/* linux/arch/arm/mach-s5pc100/include/mach/system.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC1XX - system implementation
+ *
+ * Based on mach-s3c6400/include/mach/system.h
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H __FILE__
+
+static void arch_idle(void)
+{
+	/* nothing here yet */
+}
+
+static void arch_reset(char mode, const char *cmd)
+{
+	/* nothing here yet */
+}
+
+#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/uncompress.h b/arch/arm/mach-s5pc100/include/mach/uncompress.h
new file mode 100644
index 00000000000..01ccf535e76
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/uncompress.h
@@ -0,0 +1,28 @@
+/* arch/arm/mach-s5pc100/include/mach/uncompress.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *	Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 - uncompress code
+ *
+ * Based on mach-s3c6400/include/mach/uncompress.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <mach/map.h>
+#include <plat/uncompress.h>
+
+static void arch_detect_cpu(void)
+{
+	/* we do not need to do any cpu detection here at the moment. */
+	fifo_mask = S3C2440_UFSTAT_TXMASK;
+	fifo_max = 63 << S3C2440_UFSTAT_TXSHIFT;
+}
+
+#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/arch/arm/plat-s5pc1xx/cpu.c b/arch/arm/plat-s5pc1xx/cpu.c
new file mode 100644
index 00000000000..715a7330794
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/cpu.c
@@ -0,0 +1,112 @@
+/* linux/arch/arm/plat-s5pc1xx/cpu.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *	Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC1XX CPU Support
+ *
+ * Based on plat-s3c64xx/cpu.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <asm/mach/map.h>
+
+#include <plat/regs-serial.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/clock.h>
+
+#include <plat/s5pc100.h>
+
+/* table of supported CPUs */
+
+static const char name_s5pc100[] = "S5PC100";
+
+static struct cpu_table cpu_ids[] __initdata = {
+	{
+		.idcode		= 0x43100000,
+		.idmask		= 0xfffff000,
+		.map_io		= s5pc100_map_io,
+		.init_clocks	= s5pc100_init_clocks,
+		.init_uarts	= s5pc100_init_uarts,
+		.init		= s5pc100_init,
+		.name		= name_s5pc100,
+	},
+};
+/* minimal IO mapping */
+
+/* see notes on uart map in arch/arm/mach-s5pc100/include/mach/debug-macro.S */
+#define UART_OFFS (S3C_PA_UART & 0xffff)
+
+static struct map_desc s5pc1xx_iodesc[] __initdata = {
+	{
+		.virtual	= (unsigned long)S5PC1XX_VA_CHIPID,
+		.pfn		= __phys_to_pfn(S5PC1XX_PA_CHIPID),
+		.length		= SZ_16,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5PC1XX_VA_CLK,
+		.pfn		= __phys_to_pfn(S5PC1XX_PA_CLK),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5PC1XX_VA_PWR,
+		.pfn		= __phys_to_pfn(S5PC1XX_PA_PWR),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)(S5PC1XX_VA_UART),
+		.pfn		= __phys_to_pfn(S5PC1XX_PA_UART),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5PC1XX_VA_VIC(0),
+		.pfn		= __phys_to_pfn(S5PC1XX_PA_VIC(0)),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5PC1XX_VA_VIC(1),
+		.pfn		= __phys_to_pfn(S5PC1XX_PA_VIC(1)),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5PC1XX_VA_VIC(2),
+		.pfn		= __phys_to_pfn(S5PC1XX_PA_VIC(2)),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5PC1XX_VA_TIMER,
+		.pfn		= __phys_to_pfn(S5PC1XX_PA_TIMER),
+		.length		= SZ_256,
+		.type		= MT_DEVICE,
+	},
+};
+
+/* read cpu identification code */
+
+void __init s5pc1xx_init_io(struct map_desc *mach_desc, int size)
+{
+	unsigned long idcode;
+
+	/* initialise the io descriptors we need for initialisation */
+	iotable_init(s5pc1xx_iodesc, ARRAY_SIZE(s5pc1xx_iodesc));
+	iotable_init(mach_desc, size);
+
+	idcode = __raw_readl(S5PC1XX_VA_CHIPID);
+	s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids));
+}
diff --git a/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h b/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h
new file mode 100644
index 00000000000..45e27513166
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h
@@ -0,0 +1,65 @@
+/* arch/arm/plat-s5pc1xx/include/plat/s5pc100.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *	Byungho Min <bhmin@samsung.com>
+ *
+ * Header file for s5pc100 cpu support
+ *
+ * Based on plat-s3c64xx/include/plat/s3c6400.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* Common init code for S5PC100 related SoCs */
+extern  int s5pc100_init(void);
+extern void s5pc100_map_io(void);
+extern void s5pc100_init_clocks(int xtal);
+extern  int s5pc100_register_baseclocks(unsigned long xtal);
+extern void s5pc100_init_irq(void);
+extern void s5pc100_init_io(struct map_desc *mach_desc, int size);
+extern void s5pc100_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+extern void s5pc100_register_clocks(void);
+extern void s5pc100_setup_clocks(void);
+extern struct sysdev_class s5pc100_sysclass;
+
+#define s5pc100_init_uarts s5pc100_common_init_uarts
+
+/* Some day, belows will be moved to plat-s5pc/include/plat/cpu.h */
+extern void s5pc1xx_init_irq(u32 *vic_valid, int num);
+extern void s5pc1xx_init_io(struct map_desc *mach_desc, int size);
+
+/* Some day, belows will be moved to plat-s5pc/include/plat/clock.h */
+extern struct clk clk_hpll;
+extern struct clk clk_hd0;
+extern struct clk clk_pd0;
+extern struct clk clk_54m;
+extern struct clk clk_dout_mpll2;
+extern void s5pc1xx_register_clocks(void);
+extern int s5pc1xx_sclk0_ctrl(struct clk *clk, int enable);
+extern int s5pc1xx_sclk1_ctrl(struct clk *clk, int enable);
+
+/* Some day, belows will be moved to plat-s5pc/include/plat/devs.h */
+extern struct s3c24xx_uart_resources s5pc1xx_uart_resources[];
+extern struct platform_device s3c_device_g2d;
+extern struct platform_device s3c_device_g3d;
+extern struct platform_device s3c_device_vpp;
+extern struct platform_device s3c_device_tvenc;
+extern struct platform_device s3c_device_tvscaler;
+extern struct platform_device s3c_device_rotator;
+extern struct platform_device s3c_device_jpeg;
+extern struct platform_device s3c_device_onenand;
+extern struct platform_device s3c_device_usb_otghcd;
+extern struct platform_device s3c_device_keypad;
+extern struct platform_device s3c_device_ts;
+extern struct platform_device s3c_device_g3d;
+extern struct platform_device s3c_device_smc911x;
+extern struct platform_device s3c_device_fimc0;
+extern struct platform_device s3c_device_fimc1;
+extern struct platform_device s3c_device_mfc;
+extern struct platform_device s3c_device_ac97;
+extern struct platform_device s3c_device_fimc0;
+extern struct platform_device s3c_device_fimc1;
+extern struct platform_device s3c_device_fimc2;
+
diff --git a/arch/arm/plat-s5pc1xx/s5pc100-init.c b/arch/arm/plat-s5pc1xx/s5pc100-init.c
new file mode 100644
index 00000000000..c58710884ce
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/s5pc100-init.c
@@ -0,0 +1,27 @@
+/* linux/arch/arm/plat-s5pc1xx/s5pc100-init.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 - CPU initialisation (common with other S5PC1XX chips)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/s5pc100.h>
+
+/* uart registration process */
+
+void __init s5pc100_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+	/* The driver name is s3c6400-uart to reuse s3c6400_serial_drv  */
+	s3c24xx_init_uartdevs("s3c6400-uart", s5pc1xx_uart_resources, cfg, no);
+}
-- 
cgit v1.2.3


From 0164cbf4390fbcd7125fc8d476a451a3efa14c5d Mon Sep 17 00:00:00 2001
From: Byungho Min <bhminjames@gmail.com>
Date: Tue, 23 Jun 2009 21:40:22 +0900
Subject: ARM: S5PC100: GPIO and I2C

S5PC100 has more GPIO group then previous one. It has 34 groups of GPIO, while
S3C6410 has 17 groups. For now, only header files are written.

Signed-off-by: Byungho Min <bhmin@samsung.com>
[ben-linux@fluff.org: subject fixup]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s5pc100/include/mach/gpio-core.h |  21 ++++
 arch/arm/mach-s5pc100/include/mach/gpio.h      | 146 +++++++++++++++++++++++++
 arch/arm/plat-s5pc1xx/setup-i2c0.c             |  25 +++++
 arch/arm/plat-s5pc1xx/setup-i2c1.c             |  25 +++++
 4 files changed, 217 insertions(+)
 create mode 100644 arch/arm/mach-s5pc100/include/mach/gpio-core.h
 create mode 100644 arch/arm/mach-s5pc100/include/mach/gpio.h
 create mode 100644 arch/arm/plat-s5pc1xx/setup-i2c0.c
 create mode 100644 arch/arm/plat-s5pc1xx/setup-i2c1.c

(limited to 'arch')

diff --git a/arch/arm/mach-s5pc100/include/mach/gpio-core.h b/arch/arm/mach-s5pc100/include/mach/gpio-core.h
new file mode 100644
index 00000000000..ad28d8ec8a7
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/gpio-core.h
@@ -0,0 +1,21 @@
+/* arch/arm/mach-s5pc100/include/mach/gpio-core.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 - GPIO core support
+ *
+ * Based on mach-s3c6400/include/mach/gpio-core.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_GPIO_CORE_H
+#define __ASM_ARCH_GPIO_CORE_H __FILE__
+
+/* currently we just include the platform support */
+#include <plat/gpio-core.h>
+
+#endif /* __ASM_ARCH_GPIO_CORE_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/gpio.h b/arch/arm/mach-s5pc100/include/mach/gpio.h
new file mode 100644
index 00000000000..c74fc93d7d1
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/gpio.h
@@ -0,0 +1,146 @@
+/* arch/arm/mach-s5pc100/include/mach/gpio.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *	Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 - GPIO lib support
+ *
+ * Base on mach-s3c6400/include/mach/gpio.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define gpio_get_value	__gpio_get_value
+#define gpio_set_value	__gpio_set_value
+#define gpio_cansleep	__gpio_cansleep
+#define gpio_to_irq	__gpio_to_irq
+
+/* GPIO bank sizes */
+#define S5PC1XX_GPIO_A0_NR	(8)
+#define S5PC1XX_GPIO_A1_NR	(5)
+#define S5PC1XX_GPIO_B_NR	(8)
+#define S5PC1XX_GPIO_C_NR	(5)
+#define S5PC1XX_GPIO_D_NR	(7)
+#define S5PC1XX_GPIO_E0_NR	(8)
+#define S5PC1XX_GPIO_E1_NR	(6)
+#define S5PC1XX_GPIO_F0_NR	(8)
+#define S5PC1XX_GPIO_F1_NR	(8)
+#define S5PC1XX_GPIO_F2_NR	(8)
+#define S5PC1XX_GPIO_F3_NR	(4)
+#define S5PC1XX_GPIO_G0_NR	(8)
+#define S5PC1XX_GPIO_G1_NR	(3)
+#define S5PC1XX_GPIO_G2_NR	(7)
+#define S5PC1XX_GPIO_G3_NR	(7)
+#define S5PC1XX_GPIO_H0_NR	(8)
+#define S5PC1XX_GPIO_H1_NR	(8)
+#define S5PC1XX_GPIO_H2_NR	(8)
+#define S5PC1XX_GPIO_H3_NR	(8)
+#define S5PC1XX_GPIO_I_NR	(8)
+#define S5PC1XX_GPIO_J0_NR	(8)
+#define S5PC1XX_GPIO_J1_NR	(5)
+#define S5PC1XX_GPIO_J2_NR	(8)
+#define S5PC1XX_GPIO_J3_NR	(8)
+#define S5PC1XX_GPIO_J4_NR	(4)
+#define S5PC1XX_GPIO_K0_NR	(8)
+#define S5PC1XX_GPIO_K1_NR	(6)
+#define S5PC1XX_GPIO_K2_NR	(8)
+#define S5PC1XX_GPIO_K3_NR	(8)
+#define S5PC1XX_GPIO_MP00_NR	(8)
+#define S5PC1XX_GPIO_MP01_NR	(8)
+#define S5PC1XX_GPIO_MP02_NR	(8)
+#define S5PC1XX_GPIO_MP03_NR	(8)
+#define S5PC1XX_GPIO_MP04_NR	(5)
+
+/* GPIO bank numbes */
+
+/* CONFIG_S3C_GPIO_SPACE allows the user to select extra
+ * space for debugging purposes so that any accidental
+ * change from one gpio bank to another can be caught.
+*/
+
+#define S5PC1XX_GPIO_NEXT(__gpio) \
+	((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
+
+enum s3c_gpio_number {
+	S5PC1XX_GPIO_A0_START 	= 0,
+	S5PC1XX_GPIO_A1_START 	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_A0),
+	S5PC1XX_GPIO_B_START 	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_A1),
+	S5PC1XX_GPIO_C_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_B),
+	S5PC1XX_GPIO_D_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_C),
+	S5PC1XX_GPIO_E0_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_D),
+	S5PC1XX_GPIO_E1_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_E0),
+	S5PC1XX_GPIO_F0_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_E1),
+	S5PC1XX_GPIO_F1_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_F0),
+	S5PC1XX_GPIO_F2_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_F1),
+	S5PC1XX_GPIO_F3_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_F2),
+	S5PC1XX_GPIO_G0_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_F3),
+	S5PC1XX_GPIO_G1_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_G0),
+	S5PC1XX_GPIO_G2_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_G1),
+	S5PC1XX_GPIO_G3_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_G2),
+	S5PC1XX_GPIO_H0_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_G3),
+	S5PC1XX_GPIO_H1_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_H0),
+	S5PC1XX_GPIO_H2_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_H1),
+	S5PC1XX_GPIO_H3_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_H2),
+	S5PC1XX_GPIO_I_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_H3),
+	S5PC1XX_GPIO_J0_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_I),
+	S5PC1XX_GPIO_J1_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J0),
+	S5PC1XX_GPIO_J2_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J1),
+	S5PC1XX_GPIO_J3_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J2),
+	S5PC1XX_GPIO_J4_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J3),
+	S5PC1XX_GPIO_K0_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J4),
+	S5PC1XX_GPIO_K1_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_K0),
+	S5PC1XX_GPIO_K2_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_K1),
+	S5PC1XX_GPIO_K3_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_K2),
+	S5PC1XX_GPIO_MP00_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_K3),
+	S5PC1XX_GPIO_MP01_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_MP00),
+	S5PC1XX_GPIO_MP02_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_MP01),
+	S5PC1XX_GPIO_MP03_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_MP02),
+	S5PC1XX_GPIO_MP04_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_MP03),
+};
+
+/* S5PC1XX GPIO number definitions. */
+#define S5PC1XX_GPA0(_nr)	(S5PC1XX_GPIO_A0_START + (_nr))
+#define S5PC1XX_GPA1(_nr)	(S5PC1XX_GPIO_A1_START + (_nr))
+#define S5PC1XX_GPB(_nr)	(S5PC1XX_GPIO_B_START + (_nr))
+#define S5PC1XX_GPC(_nr)	(S5PC1XX_GPIO_C_START + (_nr))
+#define S5PC1XX_GPD(_nr)	(S5PC1XX_GPIO_D_START + (_nr))
+#define S5PC1XX_GPE0(_nr)	(S5PC1XX_GPIO_E0_START + (_nr))
+#define S5PC1XX_GPE1(_nr)	(S5PC1XX_GPIO_E1_START + (_nr))
+#define S5PC1XX_GPF0(_nr)	(S5PC1XX_GPIO_F0_START + (_nr))
+#define S5PC1XX_GPF1(_nr)	(S5PC1XX_GPIO_F1_START + (_nr))
+#define S5PC1XX_GPF2(_nr)	(S5PC1XX_GPIO_F2_START + (_nr))
+#define S5PC1XX_GPF3(_nr)	(S5PC1XX_GPIO_F3_START + (_nr))
+#define S5PC1XX_GPG0(_nr)	(S5PC1XX_GPIO_G0_START + (_nr))
+#define S5PC1XX_GPG1(_nr)	(S5PC1XX_GPIO_G1_START + (_nr))
+#define S5PC1XX_GPG2(_nr)	(S5PC1XX_GPIO_G2_START + (_nr))
+#define S5PC1XX_GPG3(_nr)	(S5PC1XX_GPIO_G3_START + (_nr))
+#define S5PC1XX_GPH0(_nr)	(S5PC1XX_GPIO_H0_START + (_nr))
+#define S5PC1XX_GPH1(_nr)	(S5PC1XX_GPIO_H1_START + (_nr))
+#define S5PC1XX_GPH2(_nr)	(S5PC1XX_GPIO_H2_START + (_nr))
+#define S5PC1XX_GPH3(_nr)	(S5PC1XX_GPIO_H3_START + (_nr))
+#define S5PC1XX_GPI(_nr)	(S5PC1XX_GPIO_I_START + (_nr))
+#define S5PC1XX_GPJ0(_nr)	(S5PC1XX_GPIO_J0_START + (_nr))
+#define S5PC1XX_GPJ1(_nr)	(S5PC1XX_GPIO_J1_START + (_nr))
+#define S5PC1XX_GPJ2(_nr)	(S5PC1XX_GPIO_J2_START + (_nr))
+#define S5PC1XX_GPJ3(_nr)	(S5PC1XX_GPIO_J3_START + (_nr))
+#define S5PC1XX_GPJ4(_nr)	(S5PC1XX_GPIO_J4_START + (_nr))
+#define S5PC1XX_GPK0(_nr)	(S5PC1XX_GPIO_K0_START + (_nr))
+#define S5PC1XX_GPK1(_nr)	(S5PC1XX_GPIO_K1_START + (_nr))
+#define S5PC1XX_GPK2(_nr)	(S5PC1XX_GPIO_K2_START + (_nr))
+#define S5PC1XX_GPK3(_nr)	(S5PC1XX_GPIO_K3_START + (_nr))
+#define S5PC1XX_MP00(_nr)	(S5PC1XX_GPIO_MP00_START + (_nr))
+#define S5PC1XX_MP01(_nr)	(S5PC1XX_GPIO_MP01_START + (_nr))
+#define S5PC1XX_MP02(_nr)	(S5PC1XX_GPIO_MP02_START + (_nr))
+#define S5PC1XX_MP03(_nr)	(S5PC1XX_GPIO_MP03_START + (_nr))
+#define S5PC1XX_MP04(_nr)	(S5PC1XX_GPIO_MP04_START + (_nr))
+
+/* the end of the S5PC1XX specific gpios */
+#define S5PC1XX_GPIO_END	(S5PC1XX_MP04(S5PC1XX_GPIO_MP04_NR) + 1)
+#define S3C_GPIO_END		S5PC1XX_GPIO_END
+
+/* define the number of gpios we need to the one after the MP04() range */
+#define ARCH_NR_GPIOS	(S5PC1XX_MP04(S5PC1XX_GPIO_MP04_NR) + 1)
+
+#include <asm-generic/gpio.h>
diff --git a/arch/arm/plat-s5pc1xx/setup-i2c0.c b/arch/arm/plat-s5pc1xx/setup-i2c0.c
new file mode 100644
index 00000000000..3d00c025fff
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/setup-i2c0.c
@@ -0,0 +1,25 @@
+/* linux/arch/arm/plat-s5pc1xx/setup-i2c0.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *	Byungho Min <bhmin@samsung.com>
+ *
+ * Base S5PC1XX I2C bus 0 gpio configuration
+ *
+ * Based on plat-s3c64xx/setup-i2c0.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+struct platform_device; /* don't need the contents */
+
+#include <plat/iic.h>
+
+void s3c_i2c0_cfg_gpio(struct platform_device *dev)
+{
+	/* Pin configuration would be needed */
+}
diff --git a/arch/arm/plat-s5pc1xx/setup-i2c1.c b/arch/arm/plat-s5pc1xx/setup-i2c1.c
new file mode 100644
index 00000000000..c8f3ca42f51
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/setup-i2c1.c
@@ -0,0 +1,25 @@
+/* linux/arch/arm/plat-s3c64xx/setup-i2c1.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *	Byungho Min <bhmin@samsung.com>
+ *
+ * Base S5PC1XX I2C bus 1 gpio configuration
+ *
+ * Based on plat-s3c64xx/setup-i2c1.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+struct platform_device; /* don't need the contents */
+
+#include <plat/iic.h>
+
+void s3c_i2c1_cfg_gpio(struct platform_device *dev)
+{
+	/* Pin configuration would be needed */
+}
-- 
cgit v1.2.3


From c9b870e7e796eea515a261a314917317ebb1cb4a Mon Sep 17 00:00:00 2001
From: Byungho Min <bhminjames@gmail.com>
Date: Tue, 23 Jun 2009 21:40:03 +0900
Subject: ARM: S5PC100: IRQ and timer

S5PC100 has 3 VICs(Vectored Interrupt Controller). The VICs come from S3C64xx
series, so the driver source code can be shared with S3C families. The S5PC100
has 3 VICs while S3C64xx has only 2.

Signed-off-by: Byungho Min <bhmin@samsung.com>
[ben-linux@fluff.org: subject fixup]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s5pc100/include/mach/irqs.h      |  14 ++
 arch/arm/mach-s5pc100/include/mach/pwm-clock.h |  56 ++++++
 arch/arm/mach-s5pc100/include/mach/regs-irq.h  |  24 +++
 arch/arm/mach-s5pc100/include/mach/tick.h      |  29 +++
 arch/arm/plat-s5pc1xx/include/plat/irqs.h      | 182 +++++++++++++++++
 arch/arm/plat-s5pc1xx/irq.c                    | 259 +++++++++++++++++++++++++
 6 files changed, 564 insertions(+)
 create mode 100644 arch/arm/mach-s5pc100/include/mach/irqs.h
 create mode 100644 arch/arm/mach-s5pc100/include/mach/pwm-clock.h
 create mode 100644 arch/arm/mach-s5pc100/include/mach/regs-irq.h
 create mode 100644 arch/arm/mach-s5pc100/include/mach/tick.h
 create mode 100644 arch/arm/plat-s5pc1xx/include/plat/irqs.h
 create mode 100644 arch/arm/plat-s5pc1xx/irq.c

(limited to 'arch')

diff --git a/arch/arm/mach-s5pc100/include/mach/irqs.h b/arch/arm/mach-s5pc100/include/mach/irqs.h
new file mode 100644
index 00000000000..622720dba28
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/irqs.h
@@ -0,0 +1,14 @@
+/* linux/arch/arm/mach-s5pc100/include/mach/irqs.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 - IRQ definitions
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H __FILE__
+
+#include <plat/irqs.h>
+
+#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/pwm-clock.h b/arch/arm/mach-s5pc100/include/mach/pwm-clock.h
new file mode 100644
index 00000000000..b34d2f7aae5
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/pwm-clock.h
@@ -0,0 +1,56 @@
+/* linux/arch/arm/mach-s5pc100/include/mach/pwm-clock.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 - pwm clock and timer support
+ *
+ * Based on mach-s3c6400/include/mach/pwm-clock.h
+ */
+
+/**
+ * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk
+ * @tcfg: The timer TCFG1 register bits shifted down to 0.
+ *
+ * Return true if the given configuration from TCFG1 is a TCLK instead
+ * any of the TDIV clocks.
+ */
+static inline int pwm_cfg_src_is_tclk(unsigned long tcfg)
+{
+	return tcfg >= S3C64XX_TCFG1_MUX_TCLK;
+}
+
+/**
+ * tcfg_to_divisor() - convert tcfg1 setting to a divisor
+ * @tcfg1: The tcfg1 setting, shifted down.
+ *
+ * Get the divisor value for the given tcfg1 setting. We assume the
+ * caller has already checked to see if this is not a TCLK source.
+ */
+static inline unsigned long tcfg_to_divisor(unsigned long tcfg1)
+{
+	return 1 << tcfg1;
+}
+
+/**
+ * pwm_tdiv_has_div1() - does the tdiv setting have a /1
+ *
+ * Return true if we have a /1 in the tdiv setting.
+ */
+static inline unsigned int pwm_tdiv_has_div1(void)
+{
+	return 1;
+}
+
+/**
+ * pwm_tdiv_div_bits() - calculate TCFG1 divisor value.
+ * @div: The divisor to calculate the bit information for.
+ *
+ * Turn a divisor into the necessary bit field for TCFG1.
+ */
+static inline unsigned long pwm_tdiv_div_bits(unsigned int div)
+{
+	return ilog2(div);
+}
+
+#define S3C_TCFG1_MUX_TCLK S3C64XX_TCFG1_MUX_TCLK
diff --git a/arch/arm/mach-s5pc100/include/mach/regs-irq.h b/arch/arm/mach-s5pc100/include/mach/regs-irq.h
new file mode 100644
index 00000000000..751ac15438c
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/regs-irq.h
@@ -0,0 +1,24 @@
+/* linux/arch/arm/mach-s5pc100/include/mach/regs-irq.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *	Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC1XX - IRQ register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_IRQ_H
+#define __ASM_ARCH_REGS_IRQ_H __FILE__
+
+#include <mach/map.h>
+#include <asm/hardware/vic.h>
+
+/* interrupt controller */
+#define S5PC1XX_VIC0REG(x)          		((x) + S5PC1XX_VA_VIC(0))
+#define S5PC1XX_VIC1REG(x)          		((x) + S5PC1XX_VA_VIC(1))
+#define S5PC1XX_VIC2REG(x)         		((x) + S5PC1XX_VA_VIC(2))
+
+#endif /* __ASM_ARCH_REGS_IRQ_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/tick.h b/arch/arm/mach-s5pc100/include/mach/tick.h
new file mode 100644
index 00000000000..d3de0f3591a
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/tick.h
@@ -0,0 +1,29 @@
+/* linux/arch/arm/mach-s5pc100/include/mach/tick.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *	Byungho Min <bhmin@samsung.com>
+ *
+ * S3C64XX - Timer tick support definitions
+ *
+ * Based on mach-s3c6400/include/mach/tick.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_TICK_H
+#define __ASM_ARCH_TICK_H __FILE__
+
+/* note, the timer interrutps turn up in 2 places, the vic and then
+ * the timer block. We take the VIC as the base at the moment.
+ */
+static inline u32 s3c24xx_ostimer_pending(void)
+{
+	u32 pend = __raw_readl(S3C_VA_VIC0 + VIC_RAW_STATUS);
+	return pend & 1 << (IRQ_TIMER4 - S5PC1XX_IRQ_VIC0(0));
+}
+
+#define TICK_MAX	(0xffffffff)
+
+#endif /* __ASM_ARCH_TICK_H */
diff --git a/arch/arm/plat-s5pc1xx/include/plat/irqs.h b/arch/arm/plat-s5pc1xx/include/plat/irqs.h
new file mode 100644
index 00000000000..f07d8c3b25d
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/include/plat/irqs.h
@@ -0,0 +1,182 @@
+/* linux/arch/arm/plat-s5pc1xx/include/plat/irqs.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC1XX - Common IRQ support
+ *
+ * Based on plat-s3c64xx/include/plat/irqs.h
+ */
+
+#ifndef __ASM_PLAT_S5PC1XX_IRQS_H
+#define __ASM_PLAT_S5PC1XX_IRQS_H __FILE__
+
+/* we keep the first set of CPU IRQs out of the range of
+ * the ISA space, so that the PC104 has them to itself
+ * and we don't end up having to do horrible things to the
+ * standard ISA drivers....
+ *
+ * note, since we're using the VICs, our start must be a
+ * mulitple of 32 to allow the common code to work
+ */
+
+#define S3C_IRQ_OFFSET		(32)
+
+#define S3C_IRQ(x)		((x) + S3C_IRQ_OFFSET)
+
+#define S3C_VIC0_BASE		S3C_IRQ(0)
+#define S3C_VIC1_BASE		S3C_IRQ(32)
+#define S3C_VIC2_BASE		S3C_IRQ(64)
+
+/* UART interrupts, each UART has 4 intterupts per channel so
+ * use the space between the ISA and S3C main interrupts. Note, these
+ * are not in the same order as the S3C24XX series! */
+
+#define IRQ_S3CUART_BASE0	(16)
+#define IRQ_S3CUART_BASE1	(20)
+#define IRQ_S3CUART_BASE2	(24)
+#define IRQ_S3CUART_BASE3	(28)
+
+#define UART_IRQ_RXD		(0)
+#define UART_IRQ_ERR		(1)
+#define UART_IRQ_TXD		(2)
+#define UART_IRQ_MODEM		(3)
+
+#define IRQ_S3CUART_RX0		(IRQ_S3CUART_BASE0 + UART_IRQ_RXD)
+#define IRQ_S3CUART_TX0		(IRQ_S3CUART_BASE0 + UART_IRQ_TXD)
+#define IRQ_S3CUART_ERR0	(IRQ_S3CUART_BASE0 + UART_IRQ_ERR)
+
+#define IRQ_S3CUART_RX1		(IRQ_S3CUART_BASE1 + UART_IRQ_RXD)
+#define IRQ_S3CUART_TX1		(IRQ_S3CUART_BASE1 + UART_IRQ_TXD)
+#define IRQ_S3CUART_ERR1	(IRQ_S3CUART_BASE1 + UART_IRQ_ERR)
+
+#define IRQ_S3CUART_RX2		(IRQ_S3CUART_BASE2 + UART_IRQ_RXD)
+#define IRQ_S3CUART_TX2		(IRQ_S3CUART_BASE2 + UART_IRQ_TXD)
+#define IRQ_S3CUART_ERR2	(IRQ_S3CUART_BASE2 + UART_IRQ_ERR)
+
+#define IRQ_S3CUART_RX3		(IRQ_S3CUART_BASE3 + UART_IRQ_RXD)
+#define IRQ_S3CUART_TX3		(IRQ_S3CUART_BASE3 + UART_IRQ_TXD)
+#define IRQ_S3CUART_ERR3	(IRQ_S3CUART_BASE3 + UART_IRQ_ERR)
+
+/* VIC based IRQs */
+
+#define S5PC1XX_IRQ_VIC0(x)	(S3C_VIC0_BASE + (x))
+#define S5PC1XX_IRQ_VIC1(x)	(S3C_VIC1_BASE + (x))
+#define S5PC1XX_IRQ_VIC2(x)	(S3C_VIC2_BASE + (x))
+
+/*
+ * VIC0: system, DMA, timer
+ */
+#define IRQ_EINT0		S5PC1XX_IRQ_VIC0(0)
+#define IRQ_EINT1		S5PC1XX_IRQ_VIC0(1)
+#define IRQ_EINT2		S5PC1XX_IRQ_VIC0(2)
+#define IRQ_EINT3		S5PC1XX_IRQ_VIC0(3)
+#define IRQ_EINT4		S5PC1XX_IRQ_VIC0(4)
+#define IRQ_EINT5		S5PC1XX_IRQ_VIC0(5)
+#define IRQ_EINT6		S5PC1XX_IRQ_VIC0(6)
+#define IRQ_EINT7		S5PC1XX_IRQ_VIC0(7)
+#define IRQ_EINT8		S5PC1XX_IRQ_VIC0(8)
+#define IRQ_EINT9		S5PC1XX_IRQ_VIC0(9)
+#define IRQ_EINT10		S5PC1XX_IRQ_VIC0(10)
+#define IRQ_EINT11		S5PC1XX_IRQ_VIC0(11)
+#define IRQ_EINT12		S5PC1XX_IRQ_VIC0(12)
+#define IRQ_EINT13		S5PC1XX_IRQ_VIC0(13)
+#define IRQ_EINT14		S5PC1XX_IRQ_VIC0(14)
+#define IRQ_EINT15		S5PC1XX_IRQ_VIC0(15)
+#define IRQ_EINT16_31		S5PC1XX_IRQ_VIC0(16)
+#define IRQ_BATF		S5PC1XX_IRQ_VIC0(17)
+#define IRQ_MDMA		S5PC1XX_IRQ_VIC0(18)
+#define IRQ_PDMA0		S5PC1XX_IRQ_VIC0(19)
+#define IRQ_PDMA1		S5PC1XX_IRQ_VIC0(20)
+#define IRQ_TIMER0		S5PC1XX_IRQ_VIC0(21)
+#define IRQ_TIMER1		S5PC1XX_IRQ_VIC0(22)
+#define IRQ_TIMER2		S5PC1XX_IRQ_VIC0(23)
+#define IRQ_TIMER3		S5PC1XX_IRQ_VIC0(24)
+#define IRQ_TIMER4		S5PC1XX_IRQ_VIC0(25)
+#define IRQ_SYSTIMER		S5PC1XX_IRQ_VIC0(26)
+#define IRQ_WDT			S5PC1XX_IRQ_VIC0(27)
+#define IRQ_RTC_ALARM		S5PC1XX_IRQ_VIC0(28)
+#define IRQ_RTC_TIC		S5PC1XX_IRQ_VIC0(29)
+#define IRQ_GPIOINT		S5PC1XX_IRQ_VIC0(30)
+
+/*
+ * VIC1: ARM, power, memory, connectivity
+ */
+#define IRQ_CORTEX0		S5PC1XX_IRQ_VIC1(0)
+#define IRQ_CORTEX1		S5PC1XX_IRQ_VIC1(1)
+#define IRQ_CORTEX2		S5PC1XX_IRQ_VIC1(2)
+#define IRQ_CORTEX3		S5PC1XX_IRQ_VIC1(3)
+#define IRQ_CORTEX4		S5PC1XX_IRQ_VIC1(4)
+#define IRQ_IEMAPC		S5PC1XX_IRQ_VIC1(5)
+#define IRQ_IEMIEC		S5PC1XX_IRQ_VIC1(6)
+#define IRQ_ONENAND		S5PC1XX_IRQ_VIC1(7)
+#define IRQ_NFC			S5PC1XX_IRQ_VIC1(8)
+#define IRQ_CFC			S5PC1XX_IRQ_VIC1(9)
+#define IRQ_UART0		S5PC1XX_IRQ_VIC1(10)
+#define IRQ_UART1		S5PC1XX_IRQ_VIC1(11)
+#define IRQ_UART2		S5PC1XX_IRQ_VIC1(12)
+#define IRQ_UART3		S5PC1XX_IRQ_VIC1(13)
+#define IRQ_IIC			S5PC1XX_IRQ_VIC1(14)
+#define IRQ_SPI0		S5PC1XX_IRQ_VIC1(15)
+#define IRQ_SPI1		S5PC1XX_IRQ_VIC1(16)
+#define IRQ_SPI2		S5PC1XX_IRQ_VIC1(17)
+#define IRQ_IRDA		S5PC1XX_IRQ_VIC1(18)
+#define IRQ_CAN0		S5PC1XX_IRQ_VIC1(19)
+#define IRQ_CAN1		S5PC1XX_IRQ_VIC1(20)
+#define IRQ_HSIRX		S5PC1XX_IRQ_VIC1(21)
+#define IRQ_HSITX		S5PC1XX_IRQ_VIC1(22)
+#define IRQ_UHOST		S5PC1XX_IRQ_VIC1(23)
+#define IRQ_OTG			S5PC1XX_IRQ_VIC1(24)
+#define IRQ_MSM			S5PC1XX_IRQ_VIC1(25)
+#define IRQ_HSMMC0		S5PC1XX_IRQ_VIC1(26)
+#define IRQ_HSMMC1		S5PC1XX_IRQ_VIC1(27)
+#define IRQ_HSMMC2		S5PC1XX_IRQ_VIC1(28)
+#define IRQ_MIPICSI		S5PC1XX_IRQ_VIC1(29)
+#define IRQ_MIPIDSI		S5PC1XX_IRQ_VIC1(30)
+
+/*
+ * VIC2: multimedia, audio, security
+ */
+#define IRQ_LCD0		S5PC1XX_IRQ_VIC2(0)
+#define IRQ_LCD1		S5PC1XX_IRQ_VIC2(1)
+#define IRQ_LCD2		S5PC1XX_IRQ_VIC2(2)
+#define IRQ_LCD3		S5PC1XX_IRQ_VIC2(3)
+#define IRQ_ROTATOR		S5PC1XX_IRQ_VIC2(4)
+#define IRQ_FIMC0		S5PC1XX_IRQ_VIC2(5)
+#define IRQ_FIMC1		S5PC1XX_IRQ_VIC2(6)
+#define IRQ_FIMC2		S5PC1XX_IRQ_VIC2(7)
+#define IRQ_JPEG		S5PC1XX_IRQ_VIC2(8)
+#define IRQ_2D			S5PC1XX_IRQ_VIC2(9)
+#define IRQ_3D			S5PC1XX_IRQ_VIC2(10)
+#define IRQ_MIXER		S5PC1XX_IRQ_VIC2(11)
+#define IRQ_HDMI		S5PC1XX_IRQ_VIC2(12)
+#define IRQ_IIC1		S5PC1XX_IRQ_VIC2(13)
+#define IRQ_MFC			S5PC1XX_IRQ_VIC2(14)
+#define IRQ_TVENC		S5PC1XX_IRQ_VIC2(15)
+#define IRQ_I2S0		S5PC1XX_IRQ_VIC2(16)
+#define IRQ_I2S1		S5PC1XX_IRQ_VIC2(17)
+#define IRQ_I2S2		S5PC1XX_IRQ_VIC2(18)
+#define IRQ_AC97		S5PC1XX_IRQ_VIC2(19)
+#define IRQ_PCM0		S5PC1XX_IRQ_VIC2(20)
+#define IRQ_PCM1		S5PC1XX_IRQ_VIC2(21)
+#define IRQ_SPDIF		S5PC1XX_IRQ_VIC2(22)
+#define IRQ_ADC			S5PC1XX_IRQ_VIC2(23)
+#define IRQ_PENDN		S5PC1XX_IRQ_VIC2(24)
+#define IRQ_TC			IRQ_PENDN
+#define IRQ_KEYPAD		S5PC1XX_IRQ_VIC2(25)
+#define IRQ_CG			S5PC1XX_IRQ_VIC2(26)
+#define IRQ_SEC			S5PC1XX_IRQ_VIC2(27)
+#define IRQ_SECRX		S5PC1XX_IRQ_VIC2(28)
+#define IRQ_SECTX		S5PC1XX_IRQ_VIC2(29)
+#define IRQ_SDMIRQ		S5PC1XX_IRQ_VIC2(30)
+#define IRQ_SDMFIQ		S5PC1XX_IRQ_VIC2(31)
+
+#define S3C_IRQ_EINT_BASE	(IRQ_SDMFIQ + 1)
+
+#define S3C_EINT(x)		((x) + S3C_IRQ_EINT_BASE)
+#define IRQ_EINT(x)		S3C_EINT(x)
+
+#define NR_IRQS 		(IRQ_EINT(31)+1)
+
+#endif /* __ASM_PLAT_S5PC1XX_IRQS_H */
+
diff --git a/arch/arm/plat-s5pc1xx/irq.c b/arch/arm/plat-s5pc1xx/irq.c
new file mode 100644
index 00000000000..80d6dd942cb
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/irq.c
@@ -0,0 +1,259 @@
+/* arch/arm/plat-s5pc1xx/irq.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC1XX - Interrupt handling
+ *
+ * Based on plat-s3c64xx/irq.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <asm/hardware/vic.h>
+
+#include <mach/map.h>
+#include <plat/regs-timer.h>
+#include <plat/cpu.h>
+
+/* Timer interrupt handling */
+
+static void s3c_irq_demux_timer(unsigned int base_irq, unsigned int sub_irq)
+{
+	generic_handle_irq(sub_irq);
+}
+
+static void s3c_irq_demux_timer0(unsigned int irq, struct irq_desc *desc)
+{
+	s3c_irq_demux_timer(irq, IRQ_TIMER0);
+}
+
+static void s3c_irq_demux_timer1(unsigned int irq, struct irq_desc *desc)
+{
+	s3c_irq_demux_timer(irq, IRQ_TIMER1);
+}
+
+static void s3c_irq_demux_timer2(unsigned int irq, struct irq_desc *desc)
+{
+	s3c_irq_demux_timer(irq, IRQ_TIMER2);
+}
+
+static void s3c_irq_demux_timer3(unsigned int irq, struct irq_desc *desc)
+{
+	s3c_irq_demux_timer(irq, IRQ_TIMER3);
+}
+
+static void s3c_irq_demux_timer4(unsigned int irq, struct irq_desc *desc)
+{
+	s3c_irq_demux_timer(irq, IRQ_TIMER4);
+}
+
+/* We assume the IRQ_TIMER0..IRQ_TIMER4 range is continuous. */
+
+static void s3c_irq_timer_mask(unsigned int irq)
+{
+	u32 reg = __raw_readl(S3C64XX_TINT_CSTAT);
+
+	reg &= 0x1f;  /* mask out pending interrupts */
+	reg &= ~(1 << (irq - IRQ_TIMER0));
+	__raw_writel(reg, S3C64XX_TINT_CSTAT);
+}
+
+static void s3c_irq_timer_unmask(unsigned int irq)
+{
+	u32 reg = __raw_readl(S3C64XX_TINT_CSTAT);
+
+	reg &= 0x1f;  /* mask out pending interrupts */
+	reg |= 1 << (irq - IRQ_TIMER0);
+	__raw_writel(reg, S3C64XX_TINT_CSTAT);
+}
+
+static void s3c_irq_timer_ack(unsigned int irq)
+{
+	u32 reg = __raw_readl(S3C64XX_TINT_CSTAT);
+
+	reg &= 0x1f;
+	reg |= (1 << 5) << (irq - IRQ_TIMER0);
+	__raw_writel(reg, S3C64XX_TINT_CSTAT);
+}
+
+static struct irq_chip s3c_irq_timer = {
+	.name		= "s3c-timer",
+	.mask		= s3c_irq_timer_mask,
+	.unmask		= s3c_irq_timer_unmask,
+	.ack		= s3c_irq_timer_ack,
+};
+
+struct uart_irq {
+	void __iomem	*regs;
+	unsigned int	 base_irq;
+	unsigned int	 parent_irq;
+};
+
+/* Note, we make use of the fact that the parent IRQs, IRQ_UART[0..3]
+ * are consecutive when looking up the interrupt in the demux routines.
+ */
+static struct uart_irq uart_irqs[] = {
+	[0] = {
+		.regs		= (void *)S3C_VA_UART0,
+		.base_irq	= IRQ_S3CUART_BASE0,
+		.parent_irq	= IRQ_UART0,
+	},
+	[1] = {
+		.regs		= (void *)S3C_VA_UART1,
+		.base_irq	= IRQ_S3CUART_BASE1,
+		.parent_irq	= IRQ_UART1,
+	},
+	[2] = {
+		.regs		= (void *)S3C_VA_UART2,
+		.base_irq	= IRQ_S3CUART_BASE2,
+		.parent_irq	= IRQ_UART2,
+	},
+	[3] = {
+		.regs		= (void *)S3C_VA_UART3,
+		.base_irq	= IRQ_S3CUART_BASE3,
+		.parent_irq	= IRQ_UART3,
+	},
+};
+
+static inline void __iomem *s3c_irq_uart_base(unsigned int irq)
+{
+	struct uart_irq *uirq = get_irq_chip_data(irq);
+	return uirq->regs;
+}
+
+static inline unsigned int s3c_irq_uart_bit(unsigned int irq)
+{
+	return irq & 3;
+}
+
+/* UART interrupt registers, not worth adding to seperate include header */
+#define S3C64XX_UINTP	0x30
+#define S3C64XX_UINTSP	0x34
+#define S3C64XX_UINTM	0x38
+
+static void s3c_irq_uart_mask(unsigned int irq)
+{
+	void __iomem *regs = s3c_irq_uart_base(irq);
+	unsigned int bit = s3c_irq_uart_bit(irq);
+	u32 reg;
+
+	reg = __raw_readl(regs + S3C64XX_UINTM);
+	reg |= (1 << bit);
+	__raw_writel(reg, regs + S3C64XX_UINTM);
+}
+
+static void s3c_irq_uart_maskack(unsigned int irq)
+{
+	void __iomem *regs = s3c_irq_uart_base(irq);
+	unsigned int bit = s3c_irq_uart_bit(irq);
+	u32 reg;
+
+	reg = __raw_readl(regs + S3C64XX_UINTM);
+	reg |= (1 << bit);
+	__raw_writel(reg, regs + S3C64XX_UINTM);
+	__raw_writel(1 << bit, regs + S3C64XX_UINTP);
+}
+
+static void s3c_irq_uart_unmask(unsigned int irq)
+{
+	void __iomem *regs = s3c_irq_uart_base(irq);
+	unsigned int bit = s3c_irq_uart_bit(irq);
+	u32 reg;
+
+	reg = __raw_readl(regs + S3C64XX_UINTM);
+	reg &= ~(1 << bit);
+	__raw_writel(reg, regs + S3C64XX_UINTM);
+}
+
+static void s3c_irq_uart_ack(unsigned int irq)
+{
+	void __iomem *regs = s3c_irq_uart_base(irq);
+	unsigned int bit = s3c_irq_uart_bit(irq);
+
+	__raw_writel(1 << bit, regs + S3C64XX_UINTP);
+}
+
+static void s3c_irq_demux_uart(unsigned int irq, struct irq_desc *desc)
+{
+	struct uart_irq *uirq = &uart_irqs[irq - IRQ_UART0];
+	u32 pend = __raw_readl(uirq->regs + S3C64XX_UINTP);
+	int base = uirq->base_irq;
+
+	if (pend & (1 << 0))
+		generic_handle_irq(base);
+	if (pend & (1 << 1))
+		generic_handle_irq(base + 1);
+	if (pend & (1 << 2))
+		generic_handle_irq(base + 2);
+	if (pend & (1 << 3))
+		generic_handle_irq(base + 3);
+}
+
+static struct irq_chip s3c_irq_uart = {
+	.name		= "s3c-uart",
+	.mask		= s3c_irq_uart_mask,
+	.unmask		= s3c_irq_uart_unmask,
+	.mask_ack	= s3c_irq_uart_maskack,
+	.ack		= s3c_irq_uart_ack,
+};
+
+static void __init s5pc1xx_uart_irq(struct uart_irq *uirq)
+{
+	void __iomem *reg_base = uirq->regs;
+	unsigned int irq;
+	int offs;
+
+	/* mask all interrupts at the start. */
+	__raw_writel(0xf, reg_base + S3C64XX_UINTM);
+
+	for (offs = 0; offs < 3; offs++) {
+		irq = uirq->base_irq + offs;
+
+		set_irq_chip(irq, &s3c_irq_uart);
+		set_irq_chip_data(irq, uirq);
+		set_irq_handler(irq, handle_level_irq);
+		set_irq_flags(irq, IRQF_VALID);
+	}
+
+	set_irq_chained_handler(uirq->parent_irq, s3c_irq_demux_uart);
+}
+
+void __init s5pc1xx_init_irq(u32 *vic_valid, int num)
+{
+	int i;
+	int uart, irq;
+
+	printk(KERN_DEBUG "%s: initialising interrupts\n", __func__);
+
+	/* initialise the pair of VICs */
+	for (i = 0; i < num; i++)
+		vic_init((void *)S5PC1XX_VA_VIC(i), S3C_IRQ(i * S3C_IRQ_OFFSET),
+				vic_valid[i], 0);
+
+	/* add the timer sub-irqs */
+
+	set_irq_chained_handler(IRQ_TIMER0, s3c_irq_demux_timer0);
+	set_irq_chained_handler(IRQ_TIMER1, s3c_irq_demux_timer1);
+	set_irq_chained_handler(IRQ_TIMER2, s3c_irq_demux_timer2);
+	set_irq_chained_handler(IRQ_TIMER3, s3c_irq_demux_timer3);
+	set_irq_chained_handler(IRQ_TIMER4, s3c_irq_demux_timer4);
+
+	for (irq = IRQ_TIMER0; irq <= IRQ_TIMER4; irq++) {
+		set_irq_chip(irq, &s3c_irq_timer);
+		set_irq_handler(irq, handle_level_irq);
+		set_irq_flags(irq, IRQF_VALID);
+	}
+
+	for (uart = 0; uart < ARRAY_SIZE(uart_irqs); uart++)
+		s5pc1xx_uart_irq(&uart_irqs[uart]);
+}
+
+
-- 
cgit v1.2.3


From c1cc3db8e9fcf1c9d2db3f34552c73996d3d8a13 Mon Sep 17 00:00:00 2001
From: Byungho Min <bhminjames@gmail.com>
Date: Tue, 23 Jun 2009 21:39:56 +0900
Subject: ARM: S5PC100: Clock and PLL support

S5PC100 has 4 PLLs (APLL,MPLL,EPLL,HPLL) and 3 clock domains. Clock scheme is
implemented here.

Signed-off-by: Byungho Min <bhmin@samsung.com>
[ben-linux@fluff.org: edited title]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s5pc1xx/include/plat/pll.h        |   38 +
 arch/arm/plat-s5pc1xx/include/plat/regs-clock.h |  421 +++++++++
 arch/arm/plat-s5pc1xx/s5pc100-clock.c           | 1139 +++++++++++++++++++++++
 3 files changed, 1598 insertions(+)
 create mode 100644 arch/arm/plat-s5pc1xx/include/plat/pll.h
 create mode 100644 arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
 create mode 100644 arch/arm/plat-s5pc1xx/s5pc100-clock.c

(limited to 'arch')

diff --git a/arch/arm/plat-s5pc1xx/include/plat/pll.h b/arch/arm/plat-s5pc1xx/include/plat/pll.h
new file mode 100644
index 00000000000..21afef1573e
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/include/plat/pll.h
@@ -0,0 +1,38 @@
+/* arch/arm/plat-s5pc1xx/include/plat/pll.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *	Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC1XX PLL code
+ *
+ * Based on plat-s3c64xx/include/plat/pll.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S5P_PLL_MDIV_MASK	((1 << (25-16+1)) - 1)
+#define S5P_PLL_PDIV_MASK	((1 << (13-8+1)) - 1)
+#define S5P_PLL_SDIV_MASK	((1 << (2-0+1)) - 1)
+#define S5P_PLL_MDIV_SHIFT	(16)
+#define S5P_PLL_PDIV_SHIFT	(8)
+#define S5P_PLL_SDIV_SHIFT	(0)
+
+#include <asm/div64.h>
+
+static inline unsigned long s5pc1xx_get_pll(unsigned long baseclk,
+					    u32 pllcon)
+{
+	u32 mdiv, pdiv, sdiv;
+	u64 fvco = baseclk;
+
+	mdiv = (pllcon >> S5P_PLL_MDIV_SHIFT) & S5P_PLL_MDIV_MASK;
+	pdiv = (pllcon >> S5P_PLL_PDIV_SHIFT) & S5P_PLL_PDIV_MASK;
+	sdiv = (pllcon >> S5P_PLL_SDIV_SHIFT) & S5P_PLL_SDIV_MASK;
+
+	fvco *= mdiv;
+	do_div(fvco, (pdiv << sdiv));
+
+	return (unsigned long)fvco;
+}
diff --git a/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h b/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
new file mode 100644
index 00000000000..75c8390cb82
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
@@ -0,0 +1,421 @@
+/* arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *	Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC1XX clock register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __PLAT_REGS_CLOCK_H
+#define __PLAT_REGS_CLOCK_H __FILE__
+
+#define S5PC1XX_CLKREG(x)		(S5PC1XX_VA_CLK + (x))
+
+#define S5PC1XX_APLL_LOCK		S5PC1XX_CLKREG(0x00)
+#define S5PC1XX_MPLL_LOCK		S5PC1XX_CLKREG(0x04)
+#define S5PC1XX_EPLL_LOCK		S5PC1XX_CLKREG(0x08)
+#define S5PC100_HPLL_LOCK		S5PC1XX_CLKREG(0x0C)
+
+#define S5PC1XX_APLL_CON		S5PC1XX_CLKREG(0x100)
+#define S5PC1XX_MPLL_CON		S5PC1XX_CLKREG(0x104)
+#define S5PC1XX_EPLL_CON		S5PC1XX_CLKREG(0x108)
+#define S5PC100_HPLL_CON		S5PC1XX_CLKREG(0x10C)
+
+#define S5PC1XX_CLK_SRC0		S5PC1XX_CLKREG(0x200)
+#define S5PC1XX_CLK_SRC1		S5PC1XX_CLKREG(0x204)
+#define S5PC1XX_CLK_SRC2		S5PC1XX_CLKREG(0x208)
+#define S5PC1XX_CLK_SRC3		S5PC1XX_CLKREG(0x20C)
+
+#define S5PC1XX_CLK_DIV0		S5PC1XX_CLKREG(0x300)
+#define S5PC1XX_CLK_DIV1		S5PC1XX_CLKREG(0x304)
+#define S5PC1XX_CLK_DIV2		S5PC1XX_CLKREG(0x308)
+#define S5PC1XX_CLK_DIV3		S5PC1XX_CLKREG(0x30C)
+#define S5PC1XX_CLK_DIV4		S5PC1XX_CLKREG(0x310)
+
+#define S5PC100_CLK_OUT			S5PC1XX_CLKREG(0x400)
+
+#define S5PC100_CLKGATE_D00		S5PC1XX_CLKREG(0x500)
+#define S5PC100_CLKGATE_D01		S5PC1XX_CLKREG(0x504)
+#define S5PC100_CLKGATE_D02		S5PC1XX_CLKREG(0x508)
+
+#define S5PC100_CLKGATE_D10		S5PC1XX_CLKREG(0x520)
+#define S5PC100_CLKGATE_D11		S5PC1XX_CLKREG(0x524)
+#define S5PC100_CLKGATE_D12		S5PC1XX_CLKREG(0x528)
+#define S5PC100_CLKGATE_D13		S5PC1XX_CLKREG(0x52C)
+#define S5PC100_CLKGATE_D14		S5PC1XX_CLKREG(0x530)
+#define S5PC100_CLKGATE_D15		S5PC1XX_CLKREG(0x534)
+
+#define S5PC100_CLKGATE_D20		S5PC1XX_CLKREG(0x540)
+
+#define S5PC100_SCLKGATE0		S5PC1XX_CLKREG(0x560)
+#define S5PC100_SCLKGATE1		S5PC1XX_CLKREG(0x564)
+
+#define S5PC100_OTHERS          S5PC1XX_CLKREG(0x8200)
+
+#define S5PC1XX_EPLL_EN     (1<<31)
+#define S5PC1XX_EPLL_MASK   0xffffffff
+#define S5PC1XX_EPLLVAL(_m, _p, _s)   ((_m) << 16 | ((_p) << 8) | ((_s)))
+
+/* CLKSRC0 */
+#define S5PC1XX_CLKSRC0_APLL_MASK		(0x1<<0)
+#define S5PC1XX_CLKSRC0_APLL_SHIFT		(0)
+#define S5PC1XX_CLKSRC0_MPLL_MASK		(0x1<<4)
+#define S5PC1XX_CLKSRC0_MPLL_SHIFT		(4)
+#define S5PC1XX_CLKSRC0_EPLL_MASK		(0x1<<8)
+#define S5PC1XX_CLKSRC0_EPLL_SHIFT		(8)
+#define S5PC100_CLKSRC0_HPLL_MASK		(0x1<<12)
+#define S5PC100_CLKSRC0_HPLL_SHIFT		(12)
+#define S5PC100_CLKSRC0_AMMUX_MASK		(0x1<<16)
+#define S5PC100_CLKSRC0_AMMUX_SHIFT		(16)
+#define S5PC100_CLKSRC0_HREF_MASK		(0x1<<20)
+#define S5PC100_CLKSRC0_HREF_SHIFT		(20)
+#define S5PC1XX_CLKSRC0_ONENAND_MASK	(0x1<<24)
+#define S5PC1XX_CLKSRC0_ONENAND_SHIFT	(24)
+
+
+/* CLKSRC1 */
+#define S5PC100_CLKSRC1_UART_MASK		(0x1<<0)
+#define S5PC100_CLKSRC1_UART_SHIFT		(0)
+#define S5PC100_CLKSRC1_SPI0_MASK		(0x3<<4)
+#define S5PC100_CLKSRC1_SPI0_SHIFT		(4)
+#define S5PC100_CLKSRC1_SPI1_MASK		(0x3<<8)
+#define S5PC100_CLKSRC1_SPI1_SHIFT		(8)
+#define S5PC100_CLKSRC1_SPI2_MASK		(0x3<<12)
+#define S5PC100_CLKSRC1_SPI2_SHIFT		(12)
+#define S5PC100_CLKSRC1_IRDA_MASK		(0x3<<16)
+#define S5PC100_CLKSRC1_IRDA_SHIFT		(16)
+#define S5PC100_CLKSRC1_UHOST_MASK		(0x3<<20)
+#define S5PC100_CLKSRC1_UHOST_SHIFT		(20)
+#define S5PC100_CLKSRC1_CLK48M_MASK		(0x1<<24)
+#define S5PC100_CLKSRC1_CLK48M_SHIFT	(24)
+
+/* CLKSRC2 */
+#define S5PC100_CLKSRC2_MMC0_MASK		(0x3<<0)
+#define S5PC100_CLKSRC2_MMC0_SHIFT		(0)
+#define S5PC100_CLKSRC2_MMC1_MASK		(0x3<<4)
+#define S5PC100_CLKSRC2_MMC1_SHIFT		(4)
+#define S5PC100_CLKSRC2_MMC2_MASK		(0x3<<8)
+#define S5PC100_CLKSRC2_MMC2_SHIFT		(8)
+#define S5PC100_CLKSRC2_LCD_MASK		(0x3<<12)
+#define S5PC100_CLKSRC2_LCD_SHIFT		(12)
+#define S5PC100_CLKSRC2_FIMC0_MASK		(0x3<<16)
+#define S5PC100_CLKSRC2_FIMC0_SHIFT		(16)
+#define S5PC100_CLKSRC2_FIMC1_MASK		(0x3<<20)
+#define S5PC100_CLKSRC2_FIMC1_SHIFT		(20)
+#define S5PC100_CLKSRC2_FIMC2_MASK		(0x3<<24)
+#define S5PC100_CLKSRC2_FIMC2_SHIFT		(24)
+#define S5PC100_CLKSRC2_MIXER_MASK		(0x3<<28)
+#define S5PC100_CLKSRC2_MIXER_SHIFT		(28)
+
+/* CLKSRC3 */
+#define S5PC100_CLKSRC3_PWI_MASK		(0x3<<0)
+#define S5PC100_CLKSRC3_PWI_SHIFT		(0)
+#define S5PC100_CLKSRC3_HCLKD2_MASK		(0x1<<4)
+#define S5PC100_CLKSRC3_HCLKD2_SHIFT	(4)
+#define S5PC100_CLKSRC3_I2SD2_MASK		(0x3<<8)
+#define S5PC100_CLKSRC3_I2SD2_SHIFT		(8)
+#define S5PC100_CLKSRC3_AUDIO0_MASK		(0x7<<12)
+#define S5PC100_CLKSRC3_AUDIO0_SHIFT	(12)
+#define S5PC100_CLKSRC3_AUDIO1_MASK		(0x7<<16)
+#define S5PC100_CLKSRC3_AUDIO1_SHIFT	(16)
+#define S5PC100_CLKSRC3_AUDIO2_MASK		(0x7<<20)
+#define S5PC100_CLKSRC3_AUDIO2_SHIFT	(20)
+#define S5PC100_CLKSRC3_SPDIF_MASK		(0x3<<24)
+#define S5PC100_CLKSRC3_SPDIF_SHIFT		(24)
+
+
+/* CLKDIV0 */
+#define S5PC1XX_CLKDIV0_APLL_MASK		(0x1<<0)
+#define S5PC1XX_CLKDIV0_APLL_SHIFT		(0)
+#define S5PC100_CLKDIV0_ARM_MASK		(0x7<<4)
+#define S5PC100_CLKDIV0_ARM_SHIFT		(4)
+#define S5PC100_CLKDIV0_D0_MASK		(0x7<<8)
+#define S5PC100_CLKDIV0_D0_SHIFT		(8)
+#define S5PC100_CLKDIV0_PCLKD0_MASK		(0x7<<12)
+#define S5PC100_CLKDIV0_PCLKD0_SHIFT	(12)
+#define S5PC100_CLKDIV0_SECSS_MASK		(0x7<<16)
+#define S5PC100_CLKDIV0_SECSS_SHIFT		(16)
+
+/* CLKDIV1 */
+#define S5PC100_CLKDIV1_AM_MASK		(0x7<<0)
+#define S5PC100_CLKDIV1_AM_SHIFT		(0)
+#define S5PC100_CLKDIV1_MPLL_MASK		(0x3<<4)
+#define S5PC100_CLKDIV1_MPLL_SHIFT		(4)
+#define S5PC100_CLKDIV1_MPLL2_MASK		(0x1<<8)
+#define S5PC100_CLKDIV1_MPLL2_SHIFT		(8)
+#define S5PC100_CLKDIV1_D1_MASK		(0x7<<12)
+#define S5PC100_CLKDIV1_D1_SHIFT		(12)
+#define S5PC100_CLKDIV1_PCLKD1_MASK		(0x7<<16)
+#define S5PC100_CLKDIV1_PCLKD1_SHIFT	(16)
+#define S5PC100_CLKDIV1_ONENAND_MASK	(0x3<<20)
+#define S5PC100_CLKDIV1_ONENAND_SHIFT	(20)
+#define S5PC100_CLKDIV1_CAM_MASK		(0x1F<<24)
+#define S5PC100_CLKDIV1_CAM_SHIFT		(24)
+
+/* CLKDIV2 */
+#define S5PC100_CLKDIV2_UART_MASK		(0x7<<0)
+#define S5PC100_CLKDIV2_UART_SHIFT		(0)
+#define S5PC100_CLKDIV2_SPI0_MASK		(0xf<<4)
+#define S5PC100_CLKDIV2_SPI0_SHIFT		(4)
+#define S5PC100_CLKDIV2_SPI1_MASK		(0xf<<8)
+#define S5PC100_CLKDIV2_SPI1_SHIFT		(8)
+#define S5PC100_CLKDIV2_SPI2_MASK		(0xf<<12)
+#define S5PC100_CLKDIV2_SPI2_SHIFT		(12)
+#define S5PC100_CLKDIV2_IRDA_MASK		(0xf<<16)
+#define S5PC100_CLKDIV2_IRDA_SHIFT		(16)
+#define S5PC100_CLKDIV2_UHOST_MASK		(0xf<<20)
+#define S5PC100_CLKDIV2_UHOST_SHIFT		(20)
+
+/* CLKDIV3 */
+#define S5PC100_CLKDIV3_MMC0_MASK		(0xf<<0)
+#define S5PC100_CLKDIV3_MMC0_SHIFT		(0)
+#define S5PC100_CLKDIV3_MMC1_MASK		(0xf<<4)
+#define S5PC100_CLKDIV3_MMC1_SHIFT		(4)
+#define S5PC100_CLKDIV3_MMC2_MASK		(0xf<<8)
+#define S5PC100_CLKDIV3_MMC2_SHIFT		(8)
+#define S5PC100_CLKDIV3_LCD_MASK		(0xf<<12)
+#define S5PC100_CLKDIV3_LCD_SHIFT		(12)
+#define S5PC100_CLKDIV3_FIMC0_MASK		(0xf<<16)
+#define S5PC100_CLKDIV3_FIMC0_SHIFT		(16)
+#define S5PC100_CLKDIV3_FIMC1_MASK		(0xf<<20)
+#define S5PC100_CLKDIV3_FIMC1_SHIFT		(20)
+#define S5PC100_CLKDIV3_FIMC2_MASK		(0xf<<24)
+#define S5PC100_CLKDIV3_FIMC2_SHIFT		(24)
+#define S5PC100_CLKDIV3_HDMI_MASK		(0xf<<28)
+#define S5PC100_CLKDIV3_HDMI_SHIFT		(28)
+
+/* CLKDIV4 */
+#define S5PC100_CLKDIV4_PWI_MASK		(0x7<<0)
+#define S5PC100_CLKDIV4_PWI_SHIFT		(0)
+#define S5PC100_CLKDIV4_HCLKD2_MASK		(0x7<<4)
+#define S5PC100_CLKDIV4_HCLKD2_SHIFT	(4)
+#define S5PC100_CLKDIV4_I2SD2_MASK		(0xf<<8)
+#define S5PC100_CLKDIV4_I2SD2_SHIFT		(8)
+#define S5PC100_CLKDIV4_AUDIO0_MASK		(0xf<<12)
+#define S5PC100_CLKDIV4_AUDIO0_SHIFT	(12)
+#define S5PC100_CLKDIV4_AUDIO1_MASK		(0xf<<16)
+#define S5PC100_CLKDIV4_AUDIO1_SHIFT	(16)
+#define S5PC100_CLKDIV4_AUDIO2_MASK		(0xf<<20)
+#define S5PC100_CLKDIV4_AUDIO2_SHIFT	(20)
+
+
+/* HCLKD0/PCLKD0 Clock Gate 0 Registers */
+#define S5PC100_CLKGATE_D00_INTC		(1<<0)
+#define S5PC100_CLKGATE_D00_TZIC		(1<<1)
+#define S5PC100_CLKGATE_D00_CFCON		(1<<2)
+#define S5PC100_CLKGATE_D00_MDMA		(1<<3)
+#define S5PC100_CLKGATE_D00_G2D		(1<<4)
+#define S5PC100_CLKGATE_D00_SECSS		(1<<5)
+#define S5PC100_CLKGATE_D00_CSSYS		(1<<6)
+
+/* HCLKD0/PCLKD0 Clock Gate 1 Registers */
+#define S5PC100_CLKGATE_D01_DMC		(1<<0)
+#define S5PC100_CLKGATE_D01_SROMC		(1<<1)
+#define S5PC100_CLKGATE_D01_ONENAND		(1<<2)
+#define S5PC100_CLKGATE_D01_NFCON		(1<<3)
+#define S5PC100_CLKGATE_D01_INTMEM		(1<<4)
+#define S5PC100_CLKGATE_D01_EBI		(1<<5)
+
+/* PCLKD0 Clock Gate 2 Registers */
+#define S5PC100_CLKGATE_D02_SECKEY		(1<<1)
+#define S5PC100_CLKGATE_D02_SDM		(1<<2)
+
+/* HCLKD1/PCLKD1 Clock Gate 0 Registers */
+#define S5PC100_CLKGATE_D10_PDMA0		(1<<0)
+#define S5PC100_CLKGATE_D10_PDMA1		(1<<1)
+#define S5PC100_CLKGATE_D10_USBHOST		(1<<2)
+#define S5PC100_CLKGATE_D10_USBOTG		(1<<3)
+#define S5PC100_CLKGATE_D10_MODEMIF		(1<<4)
+#define S5PC100_CLKGATE_D10_HSMMC0		(1<<5)
+#define S5PC100_CLKGATE_D10_HSMMC1		(1<<6)
+#define S5PC100_CLKGATE_D10_HSMMC2		(1<<7)
+
+/* HCLKD1/PCLKD1 Clock Gate 1 Registers */
+#define S5PC100_CLKGATE_D11_LCD		(1<<0)
+#define S5PC100_CLKGATE_D11_ROTATOR		(1<<1)
+#define S5PC100_CLKGATE_D11_FIMC0		(1<<2)
+#define S5PC100_CLKGATE_D11_FIMC1		(1<<3)
+#define S5PC100_CLKGATE_D11_FIMC2		(1<<4)
+#define S5PC100_CLKGATE_D11_JPEG		(1<<5)
+#define S5PC100_CLKGATE_D11_DSI		(1<<6)
+#define S5PC100_CLKGATE_D11_CSI		(1<<7)
+#define S5PC100_CLKGATE_D11_G3D		(1<<8)
+
+/* HCLKD1/PCLKD1 Clock Gate 2 Registers */
+#define S5PC100_CLKGATE_D12_TV		(1<<0)
+#define S5PC100_CLKGATE_D12_VP		(1<<1)
+#define S5PC100_CLKGATE_D12_MIXER		(1<<2)
+#define S5PC100_CLKGATE_D12_HDMI		(1<<3)
+#define S5PC100_CLKGATE_D12_MFC		(1<<4)
+
+/* HCLKD1/PCLKD1 Clock Gate 3 Registers */
+#define S5PC100_CLKGATE_D13_CHIPID		(1<<0)
+#define S5PC100_CLKGATE_D13_GPIO		(1<<1)
+#define S5PC100_CLKGATE_D13_APC		(1<<2)
+#define S5PC100_CLKGATE_D13_IEC		(1<<3)
+#define S5PC100_CLKGATE_D13_PWM		(1<<6)
+#define S5PC100_CLKGATE_D13_SYSTIMER	(1<<7)
+#define S5PC100_CLKGATE_D13_WDT		(1<<8)
+#define S5PC100_CLKGATE_D13_RTC		(1<<9)
+
+/* HCLKD1/PCLKD1 Clock Gate 4 Registers */
+#define S5PC100_CLKGATE_D14_UART0		(1<<0)
+#define S5PC100_CLKGATE_D14_UART1		(1<<1)
+#define S5PC100_CLKGATE_D14_UART2		(1<<2)
+#define S5PC100_CLKGATE_D14_UART3		(1<<3)
+#define S5PC100_CLKGATE_D14_IIC		(1<<4)
+#define S5PC100_CLKGATE_D14_HDMI_IIC	(1<<5)
+#define S5PC100_CLKGATE_D14_SPI0		(1<<6)
+#define S5PC100_CLKGATE_D14_SPI1		(1<<7)
+#define S5PC100_CLKGATE_D14_SPI2		(1<<8)
+#define S5PC100_CLKGATE_D14_IRDA		(1<<9)
+#define S5PC100_CLKGATE_D14_CCAN0		(1<<10)
+#define S5PC100_CLKGATE_D14_CCAN1		(1<<11)
+#define S5PC100_CLKGATE_D14_HSITX		(1<<12)
+#define S5PC100_CLKGATE_D14_HSIRX		(1<<13)
+
+/* HCLKD1/PCLKD1 Clock Gate 5 Registers */
+#define S5PC100_CLKGATE_D15_IIS0		(1<<0)
+#define S5PC100_CLKGATE_D15_IIS1		(1<<1)
+#define S5PC100_CLKGATE_D15_IIS2		(1<<2)
+#define S5PC100_CLKGATE_D15_AC97		(1<<3)
+#define S5PC100_CLKGATE_D15_PCM0		(1<<4)
+#define S5PC100_CLKGATE_D15_PCM1		(1<<5)
+#define S5PC100_CLKGATE_D15_SPDIF		(1<<6)
+#define S5PC100_CLKGATE_D15_TSADC		(1<<7)
+#define S5PC100_CLKGATE_D15_KEYIF		(1<<8)
+#define S5PC100_CLKGATE_D15_CG		(1<<9)
+
+/* HCLKD2 Clock Gate 0 Registers */
+#define S5PC100_CLKGATE_D20_HCLKD2		(1<<0)
+#define S5PC100_CLKGATE_D20_I2SD2		(1<<1)
+
+/* Special Clock Gate 0 Registers */
+#define	S5PC1XX_CLKGATE_SCLK0_HPM		(1<<0)
+#define	S5PC1XX_CLKGATE_SCLK0_PWI		(1<<1)
+#define	S5PC100_CLKGATE_SCLK0_ONENAND	(1<<2)
+#define	S5PC100_CLKGATE_SCLK0_UART		(1<<3)
+#define	S5PC100_CLKGATE_SCLK0_SPI0		(1<<4)
+#define	S5PC100_CLKGATE_SCLK0_SPI1		(1<<5)
+#define	S5PC100_CLKGATE_SCLK0_SPI2		(1<<6)
+#define	S5PC100_CLKGATE_SCLK0_SPI0_48	(1<<7)
+#define	S5PC100_CLKGATE_SCLK0_SPI1_48	(1<<8)
+#define	S5PC100_CLKGATE_SCLK0_SPI2_48	(1<<9)
+#define	S5PC100_CLKGATE_SCLK0_IRDA		(1<<10)
+#define	S5PC100_CLKGATE_SCLK0_USBHOST	(1<<11)
+#define	S5PC100_CLKGATE_SCLK0_MMC0		(1<<12)
+#define	S5PC100_CLKGATE_SCLK0_MMC1		(1<<13)
+#define	S5PC100_CLKGATE_SCLK0_MMC2		(1<<14)
+#define	S5PC100_CLKGATE_SCLK0_MMC0_48	(1<<15)
+#define	S5PC100_CLKGATE_SCLK0_MMC1_48	(1<<16)
+#define	S5PC100_CLKGATE_SCLK0_MMC2_48	(1<<17)
+
+/* Special Clock Gate 1 Registers */
+#define	S5PC100_CLKGATE_SCLK1_LCD		(1<<0)
+#define	S5PC100_CLKGATE_SCLK1_FIMC0		(1<<1)
+#define	S5PC100_CLKGATE_SCLK1_FIMC1		(1<<2)
+#define	S5PC100_CLKGATE_SCLK1_FIMC2		(1<<3)
+#define	S5PC100_CLKGATE_SCLK1_TV54		(1<<4)
+#define	S5PC100_CLKGATE_SCLK1_VDAC54	(1<<5)
+#define	S5PC100_CLKGATE_SCLK1_MIXER		(1<<6)
+#define	S5PC100_CLKGATE_SCLK1_HDMI		(1<<7)
+#define	S5PC100_CLKGATE_SCLK1_AUDIO0	(1<<8)
+#define	S5PC100_CLKGATE_SCLK1_AUDIO1	(1<<9)
+#define	S5PC100_CLKGATE_SCLK1_AUDIO2	(1<<10)
+#define	S5PC100_CLKGATE_SCLK1_SPDIF		(1<<11)
+#define	S5PC100_CLKGATE_SCLK1_CAM		(1<<12)
+
+/* register for power management */
+#define S5PC100_PWR_CFG 		S5PC1XX_CLKREG(0x8000)
+#define S5PC100_EINT_WAKEUP_MASK 	S5PC1XX_CLKREG(0x8004)
+#define S5PC100_NORMAL_CFG 		S5PC1XX_CLKREG(0x8010)
+#define S5PC100_STOP_CFG 		S5PC1XX_CLKREG(0x8014)
+#define S5PC100_SLEEP_CFG 		S5PC1XX_CLKREG(0x8018)
+#define S5PC100_STOP_MEM_CFG 	S5PC1XX_CLKREG(0x801C)
+#define S5PC100_OSC_FREQ 		S5PC1XX_CLKREG(0x8100)
+#define S5PC100_OSC_STABLE 		S5PC1XX_CLKREG(0x8104)
+#define S5PC100_PWR_STABLE 		S5PC1XX_CLKREG(0x8108)
+#define S5PC100_MTC_STABLE 		S5PC1XX_CLKREG(0x8110)
+#define S5PC100_CLAMP_STABLE 	S5PC1XX_CLKREG(0x8114)
+#define S5PC100_OTHERS 		S5PC1XX_CLKREG(0x8200)
+#define S5PC100_RST_STAT 		S5PC1XX_CLKREG(0x8300)
+#define S5PC100_WAKEUP_STAT 	S5PC1XX_CLKREG(0x8304)
+#define S5PC100_BLK_PWR_STAT 	S5PC1XX_CLKREG(0x8308)
+#define S5PC100_INFORM0 		S5PC1XX_CLKREG(0x8400)
+#define S5PC100_INFORM1 		S5PC1XX_CLKREG(0x8404)
+#define S5PC100_INFORM2 		S5PC1XX_CLKREG(0x8408)
+#define S5PC100_INFORM3 		S5PC1XX_CLKREG(0x840C)
+#define S5PC100_INFORM4 		S5PC1XX_CLKREG(0x8410)
+#define S5PC100_INFORM5 		S5PC1XX_CLKREG(0x8414)
+#define S5PC100_INFORM6 		S5PC1XX_CLKREG(0x8418)
+#define S5PC100_INFORM7 		S5PC1XX_CLKREG(0x841C)
+#define S5PC100_DCGIDX_MAP0 	S5PC1XX_CLKREG(0x8500)
+#define S5PC100_DCGIDX_MAP1 	S5PC1XX_CLKREG(0x8504)
+#define S5PC100_DCGIDX_MAP2 	S5PC1XX_CLKREG(0x8508)
+#define S5PC100_DCGPERF_MAP0 	S5PC1XX_CLKREG(0x850C)
+#define S5PC100_DCGPERF_MAP1 	S5PC1XX_CLKREG(0x8510)
+#define S5PC100_DVCIDX_MAP 		S5PC1XX_CLKREG(0x8514)
+#define S5PC100_FREQ_CPU 		S5PC1XX_CLKREG(0x8518)
+#define S5PC100_FREQ_DPM 		S5PC1XX_CLKREG(0x851C)
+#define S5PC100_DVSEMCLK_EN 	S5PC1XX_CLKREG(0x8520)
+#define S5PC100_APLL_CON_L8 	S5PC1XX_CLKREG(0x8600)
+#define S5PC100_APLL_CON_L7 	S5PC1XX_CLKREG(0x8604)
+#define S5PC100_APLL_CON_L6 	S5PC1XX_CLKREG(0x8608)
+#define S5PC100_APLL_CON_L5 	S5PC1XX_CLKREG(0x860C)
+#define S5PC100_APLL_CON_L4 	S5PC1XX_CLKREG(0x8610)
+#define S5PC100_APLL_CON_L3 	S5PC1XX_CLKREG(0x8614)
+#define S5PC100_APLL_CON_L2 	S5PC1XX_CLKREG(0x8618)
+#define S5PC100_APLL_CON_L1 	S5PC1XX_CLKREG(0x861C)
+#define S5PC100_IEM_CONTROL 	S5PC1XX_CLKREG(0x8620)
+#define S5PC100_CLKDIV_IEM_L8 	S5PC1XX_CLKREG(0x8700)
+#define S5PC100_CLKDIV_IEM_L7 	S5PC1XX_CLKREG(0x8704)
+#define S5PC100_CLKDIV_IEM_L6 	S5PC1XX_CLKREG(0x8708)
+#define S5PC100_CLKDIV_IEM_L5 	S5PC1XX_CLKREG(0x870C)
+#define S5PC100_CLKDIV_IEM_L4 	S5PC1XX_CLKREG(0x8710)
+#define S5PC100_CLKDIV_IEM_L3 	S5PC1XX_CLKREG(0x8714)
+#define S5PC100_CLKDIV_IEM_L2 	S5PC1XX_CLKREG(0x8718)
+#define S5PC100_CLKDIV_IEM_L1 	S5PC1XX_CLKREG(0x871C)
+#define S5PC100_IEM_HPMCLK_DIV 	S5PC1XX_CLKREG(0x8724)
+
+#define S5PC100_SWRESET		S5PC1XX_CLKREG(0x100000)
+#define S5PC100_OND_SWRESET		S5PC1XX_CLKREG(0x100008)
+#define S5PC100_GEN_CTRL		S5PC1XX_CLKREG(0x100100)
+#define S5PC100_GEN_STATUS		S5PC1XX_CLKREG(0x100104)
+#define S5PC100_MEM_SYS_CFG		S5PC1XX_CLKREG(0x100200)
+#define S5PC100_CAM_MUX_SEL		S5PC1XX_CLKREG(0x100300)
+#define S5PC100_MIXER_OUT_SEL	S5PC1XX_CLKREG(0x100304)
+#define S5PC100_LPMP_MODE_SEL	S5PC1XX_CLKREG(0x100308)
+#define S5PC100_MIPI_PHY_CON0	S5PC1XX_CLKREG(0x100400)
+#define S5PC100_MIPI_PHY_CON1	S5PC1XX_CLKREG(0x100414)
+#define S5PC100_HDMI_PHY_CON0	S5PC1XX_CLKREG(0x100420)
+
+#define S5PC100_CFG_WFI_CLEAN	(~(3<<5))
+#define S5PC100_CFG_WFI_IDLE	(1<<5)
+#define S5PC100_CFG_WFI_STOP	(2<<5)
+#define S5PC100_CFG_WFI_SLEEP	(3<<5)
+
+#define S5PC100_OTHER_SYS_INT	24
+#define S5PC100_OTHER_STA_TYPE	23
+#define STA_TYPE_EXPON		0
+#define STA_TYPE_SFR		1
+
+#define S5PC100_PWR_STA_EXP_SCALE	0
+#define S5PC100_PWR_STA_CNT		4
+
+#define S5PC100_PWR_STABLE_COUNT	85500
+
+#define S5PC100_SLEEP_CFG_OSC_EN	0
+
+/* OTHERS Resgister */
+#define S5PC100_OTHERS_USB_SIG_MASK 	(1 << 16)
+#define S5PC100_OTHERS_MIPI_DPHY_EN		(1 << 28)
+
+/* MIPI D-PHY Control Register 0 */
+#define S5PC100_MIPI_PHY_CON0_M_RESETN	(1 << 1)
+#define S5PC100_MIPI_PHY_CON0_S_RESETN	(1 << 0)
+
+#endif /* _PLAT_REGS_CLOCK_H */
diff --git a/arch/arm/plat-s5pc1xx/s5pc100-clock.c b/arch/arm/plat-s5pc1xx/s5pc100-clock.c
new file mode 100644
index 00000000000..6b24035172f
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/s5pc100-clock.c
@@ -0,0 +1,1139 @@
+/* linux/arch/arm/plat-s5pc1xx/s5pc100-clock.c
+ *
+ * Copyright 2009 Samsung Electronics, Co.
+ *	Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC100 based common clock support
+ *
+ * Based on plat-s3c64xx/s3c6400-clock.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/sysdev.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <plat/cpu-freq.h>
+
+#include <plat/regs-clock.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/pll.h>
+#include <plat/devs.h>
+#include <plat/s5pc100.h>
+
+/* fin_apll, fin_mpll and fin_epll are all the same clock, which we call
+ * ext_xtal_mux for want of an actual name from the manual.
+*/
+
+static struct clk clk_ext_xtal_mux = {
+	.name		= "ext_xtal",
+	.id		= -1,
+};
+
+#define clk_fin_apll clk_ext_xtal_mux
+#define clk_fin_mpll clk_ext_xtal_mux
+#define clk_fin_epll clk_ext_xtal_mux
+#define clk_fin_hpll clk_ext_xtal_mux
+
+#define clk_fout_mpll	clk_mpll
+
+struct clk_sources {
+	unsigned int	nr_sources;
+	struct clk	**sources;
+};
+
+struct clksrc_clk {
+	struct clk		clk;
+	unsigned int		mask;
+	unsigned int		shift;
+
+	struct clk_sources	*sources;
+
+	unsigned int		divider_shift;
+	void __iomem		*reg_divider;
+	void __iomem		*reg_source;
+};
+
+static int clk_default_setrate(struct clk *clk, unsigned long rate)
+{
+	clk->rate = rate;
+	return 1;
+}
+
+struct clk clk_27m = {
+	.name		= "clk_27m",
+	.id		= -1,
+	.rate		= 27000000,
+};
+
+static int clk_48m_ctrl(struct clk *clk, int enable)
+{
+	unsigned long flags;
+	u32 val;
+
+	/* can't rely on clock lock, this register has other usages */
+	local_irq_save(flags);
+
+	val = __raw_readl(S5PC1XX_CLK_SRC1);
+	if (enable)
+		val |= S5PC100_CLKSRC1_CLK48M_MASK;
+	else
+		val &= ~S5PC100_CLKSRC1_CLK48M_MASK;
+
+	__raw_writel(val, S5PC1XX_CLK_SRC1);
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+struct clk clk_48m = {
+	.name		= "clk_48m",
+	.id		= -1,
+	.rate		= 48000000,
+	.enable		= clk_48m_ctrl,
+};
+
+struct clk clk_54m = {
+	.name		= "clk_54m",
+	.id		= -1,
+	.rate		= 54000000,
+};
+
+struct clk clk_hpll = {
+	.name		= "hpll",
+	.id		= -1,
+};
+
+struct clk clk_hd0 = {
+	.name		= "hclkd0",
+	.id		= -1,
+	.rate		= 0,
+	.parent		= NULL,
+	.ctrlbit	= 0,
+	.set_rate	= clk_default_setrate,
+};
+
+struct clk clk_pd0 = {
+	.name		= "pclkd0",
+	.id		= -1,
+	.rate		= 0,
+	.parent		= NULL,
+	.ctrlbit	= 0,
+	.set_rate	= clk_default_setrate,
+};
+
+static int s5pc1xx_clk_gate(void __iomem *reg,
+				struct clk *clk,
+				int enable)
+{
+	unsigned int ctrlbit = clk->ctrlbit;
+	u32 con;
+
+	con = __raw_readl(reg);
+
+	if (enable)
+		con |= ctrlbit;
+	else
+		con &= ~ctrlbit;
+
+	__raw_writel(con, reg);
+	return 0;
+}
+
+static int s5pc1xx_clk_d00_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D00, clk, enable);
+}
+
+static int s5pc1xx_clk_d01_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D01, clk, enable);
+}
+
+static int s5pc1xx_clk_d02_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D02, clk, enable);
+}
+
+static int s5pc1xx_clk_d10_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D10, clk, enable);
+}
+
+static int s5pc1xx_clk_d11_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D11, clk, enable);
+}
+
+static int s5pc1xx_clk_d12_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D12, clk, enable);
+}
+
+static int s5pc1xx_clk_d13_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D13, clk, enable);
+}
+
+static int s5pc1xx_clk_d14_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D14, clk, enable);
+}
+
+static int s5pc1xx_clk_d15_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D15, clk, enable);
+}
+
+static int s5pc1xx_clk_d20_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D20, clk, enable);
+}
+
+int s5pc1xx_sclk0_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_SCLKGATE0, clk, enable);
+}
+
+int s5pc1xx_sclk1_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_SCLKGATE1, clk, enable);
+}
+
+static struct clk init_clocks_disable[] = {
+	{
+		.name		= "dsi",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d11_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D11_DSI,
+	}, {
+		.name		= "csi",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s5pc1xx_clk_d11_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D11_CSI,
+	}, {
+		.name		= "ccan0",
+		.id		= 0,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_CCAN0,
+	}, {
+		.name		= "ccan1",
+		.id		= 1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_CCAN1,
+	}, {
+		.name		= "keypad",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d15_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D15_KEYIF,
+	}, {
+		.name		= "hclkd2",
+		.id		= -1,
+		.parent		= NULL,
+		.enable		= s5pc1xx_clk_d20_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D20_HCLKD2,
+	}, {
+		.name		= "iis-d2",
+		.id		= -1,
+		.parent		= NULL,
+		.enable		= s5pc1xx_clk_d20_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D20_I2SD2,
+	}, {
+		.name		= "otg",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s5pc1xx_clk_d10_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D10_USBOTG,
+	},
+};
+
+static struct clk init_clocks[] = {
+	/* System1 (D0_0) devices */
+	{
+		.name		= "intc",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc1xx_clk_d00_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D00_INTC,
+	}, {
+		.name		= "tzic",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc1xx_clk_d00_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D00_TZIC,
+	}, {
+		.name		= "cf-ata",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc1xx_clk_d00_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D00_CFCON,
+	}, {
+		.name		= "mdma",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc1xx_clk_d00_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D00_MDMA,
+	}, {
+		.name		= "g2d",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc1xx_clk_d00_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D00_G2D,
+	}, {
+		.name		= "secss",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc1xx_clk_d00_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D00_SECSS,
+	}, {
+		.name		= "cssys",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc1xx_clk_d00_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D00_CSSYS,
+	},
+
+	/* Memory (D0_1) devices */
+	{
+		.name		= "dmc",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc1xx_clk_d01_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D01_DMC,
+	}, {
+		.name		= "sromc",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc1xx_clk_d01_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D01_SROMC,
+	}, {
+		.name		= "onenand",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc1xx_clk_d01_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D01_ONENAND,
+	}, {
+		.name		= "nand",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc1xx_clk_d01_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D01_NFCON,
+	}, {
+		.name		= "intmem",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc1xx_clk_d01_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D01_INTMEM,
+	}, {
+		.name		= "ebi",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc1xx_clk_d01_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D01_EBI,
+	},
+
+	/* System2 (D0_2) devices */
+	{
+		.name		= "seckey",
+		.id		= -1,
+		.parent		= &clk_pd0,
+		.enable		= s5pc1xx_clk_d02_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D02_SECKEY,
+	}, {
+		.name		= "sdm",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc1xx_clk_d02_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D02_SDM,
+	},
+
+	/* File (D1_0) devices */
+	{
+		.name		= "pdma0",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s5pc1xx_clk_d10_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D10_PDMA0,
+	}, {
+		.name		= "pdma1",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s5pc1xx_clk_d10_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D10_PDMA1,
+	}, {
+		.name		= "usb-host",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s5pc1xx_clk_d10_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D10_USBHOST,
+	}, {
+		.name		= "modem",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s5pc1xx_clk_d10_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D10_MODEMIF,
+	}, {
+		.name		= "hsmmc",
+		.id		= 0,
+		.parent		= &clk_h,
+		.enable		= s5pc1xx_clk_d10_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D10_HSMMC0,
+	}, {
+		.name		= "hsmmc",
+		.id		= 1,
+		.parent		= &clk_h,
+		.enable		= s5pc1xx_clk_d10_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D10_HSMMC1,
+	}, {
+		.name		= "hsmmc",
+		.id		= 2,
+		.parent		= &clk_h,
+		.enable		= s5pc1xx_clk_d10_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D10_HSMMC2,
+	},
+
+	/* Multimedia1 (D1_1) devices */
+	{
+		.name		= "lcd",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s5pc1xx_clk_d11_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D11_LCD,
+	}, {
+		.name		= "rotator",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s5pc1xx_clk_d11_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D11_ROTATOR,
+	}, {
+		.name		= "fimc",
+		.id		= 0,
+		.parent		= &clk_h,
+		.enable		= s5pc1xx_clk_d11_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D11_FIMC0,
+	}, {
+		.name		= "fimc",
+		.id		= 1,
+		.parent		= &clk_h,
+		.enable		= s5pc1xx_clk_d11_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D11_FIMC1,
+	}, {
+		.name		= "fimc",
+		.id		= 2,
+		.parent		= &clk_h,
+		.enable		= s5pc1xx_clk_d11_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D11_FIMC2,
+	}, {
+		.name		= "jpeg",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s5pc1xx_clk_d11_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D11_JPEG,
+	}, {
+		.name		= "g3d",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s5pc1xx_clk_d11_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D11_G3D,
+	},
+
+	/* Multimedia2 (D1_2) devices */
+	{
+		.name		= "tv",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s5pc1xx_clk_d12_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D12_TV,
+	}, {
+		.name		= "vp",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s5pc1xx_clk_d12_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D12_VP,
+	}, {
+		.name		= "mixer",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s5pc1xx_clk_d12_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D12_MIXER,
+	}, {
+		.name		= "hdmi",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s5pc1xx_clk_d12_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D12_HDMI,
+	}, {
+		.name		= "mfc",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s5pc1xx_clk_d12_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D12_MFC,
+	},
+
+	/* System (D1_3) devices */
+	{
+		.name		= "chipid",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d13_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D13_CHIPID,
+	}, {
+		.name		= "gpio",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d13_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D13_GPIO,
+	}, {
+		.name		= "apc",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d13_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D13_APC,
+	}, {
+		.name		= "iec",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d13_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D13_IEC,
+	}, {
+		.name		= "timers",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d13_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D13_PWM,
+	}, {
+		.name		= "systimer",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d13_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D13_SYSTIMER,
+	}, {
+		.name		= "watchdog",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d13_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D13_WDT,
+	}, {
+		.name		= "rtc",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d13_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D13_RTC,
+	},
+
+	/* Connectivity (D1_4) devices */
+	{
+		.name		= "uart",
+		.id		= 0,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_UART0,
+	}, {
+		.name		= "uart",
+		.id		= 1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_UART1,
+	}, {
+		.name		= "uart",
+		.id		= 2,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_UART2,
+	}, {
+		.name		= "uart",
+		.id		= 3,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_UART3,
+	}, {
+		.name		= "i2c",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_IIC,
+	}, {
+		.name		= "hdmi-i2c",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_HDMI_IIC,
+	}, {
+		.name		= "spi",
+		.id		= 0,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_SPI0,
+	}, {
+		.name		= "spi",
+		.id		= 1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_SPI1,
+	}, {
+		.name		= "spi",
+		.id		= 2,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_SPI2,
+	}, {
+		.name		= "irda",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_IRDA,
+	}, {
+		.name		= "hsitx",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_HSITX,
+	}, {
+		.name		= "hsirx",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_HSIRX,
+	},
+
+	/* Audio (D1_5) devices */
+	{
+		.name		= "iis",
+		.id		= 0,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d15_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D15_IIS0,
+	}, {
+		.name		= "iis",
+		.id		= 1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d15_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D15_IIS1,
+	}, {
+		.name		= "iis",
+		.id		= 2,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d15_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D15_IIS2,
+	}, {
+		.name		= "ac97",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d15_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D15_AC97,
+	}, {
+		.name		= "pcm",
+		.id		= 0,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d15_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D15_PCM0,
+	}, {
+		.name		= "pcm",
+		.id		= 1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d15_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D15_PCM1,
+	}, {
+		.name		= "spdif",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d15_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D15_SPDIF,
+	}, {
+		.name		= "adc",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d15_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D15_TSADC,
+	}, {
+		.name		= "keyif",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d15_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D15_KEYIF,
+	}, {
+		.name		= "cg",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc1xx_clk_d15_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D15_CG,
+	},
+
+	/* Audio (D2_0) devices: all disabled */
+
+	/* Special Clocks 1 */
+	{
+		.name		= "sclk_hpm",
+		.id		= -1,
+		.parent		= NULL,
+		.enable		= s5pc1xx_sclk0_ctrl,
+		.ctrlbit	= S5PC1XX_CLKGATE_SCLK0_HPM,
+	}, {
+		.name		= "sclk_onenand",
+		.id		= -1,
+		.parent		= NULL,
+		.enable		= s5pc1xx_sclk0_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK0_ONENAND,
+	}, {
+		.name		= "sclk_spi_48",
+		.id		= 0,
+		.parent		= &clk_48m,
+		.enable		= s5pc1xx_sclk0_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK0_SPI0_48,
+	}, {
+		.name		= "sclk_spi_48",
+		.id		= 1,
+		.parent		= &clk_48m,
+		.enable		= s5pc1xx_sclk0_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK0_SPI1_48,
+	}, {
+		.name		= "sclk_spi_48",
+		.id		= 2,
+		.parent		= &clk_48m,
+		.enable		= s5pc1xx_sclk0_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK0_SPI2_48,
+	}, {
+		.name		= "sclk_mmc_48",
+		.id		= 0,
+		.parent		= &clk_48m,
+		.enable		= s5pc1xx_sclk0_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK0_MMC0_48,
+	}, {
+		.name		= "sclk_mmc_48",
+		.id		= 1,
+		.parent		= &clk_48m,
+		.enable		= s5pc1xx_sclk0_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK0_MMC1_48,
+	}, {
+		.name		= "sclk_mmc_48",
+		.id		= 2,
+		.parent		= &clk_48m,
+		.enable		= s5pc1xx_sclk0_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK0_MMC2_48,
+	},
+
+	/* Special Clocks 2 */
+	{
+		.name		= "sclk_tv_54",
+		.id		= -1,
+		.parent		= &clk_54m,
+		.enable		= s5pc1xx_sclk1_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK1_TV54,
+	}, {
+		.name		= "sclk_vdac_54",
+		.id		= -1,
+		.parent		= &clk_54m,
+		.enable		= s5pc1xx_sclk1_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK1_VDAC54,
+	}, {
+		.name		= "sclk_spdif",
+		.id		= -1,
+		.parent		= NULL,
+		.enable		= s5pc1xx_sclk1_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK1_SPDIF,
+	},
+};
+
+void __init s5pc1xx_register_clocks(void)
+{
+	struct clk *clkp;
+	int ret;
+	int ptr;
+
+	clkp = init_clocks;
+	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) {
+		ret = s3c24xx_register_clock(clkp);
+		if (ret < 0) {
+			printk(KERN_ERR "Failed to register clock %s (%d)\n",
+			       clkp->name, ret);
+		}
+	}
+
+	clkp = init_clocks_disable;
+	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
+
+		ret = s3c24xx_register_clock(clkp);
+		if (ret < 0) {
+			printk(KERN_ERR "Failed to register clock %s (%d)\n",
+			       clkp->name, ret);
+		}
+
+		(clkp->enable)(clkp, 0);
+	}
+
+	s3c_pwmclk_init();
+}
+static struct clk clk_fout_apll = {
+	.name		= "fout_apll",
+	.id		= -1,
+};
+
+static struct clk *clk_src_apll_list[] = {
+	[0] = &clk_fin_apll,
+	[1] = &clk_fout_apll,
+};
+
+static struct clk_sources clk_src_apll = {
+	.sources	= clk_src_apll_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_apll_list),
+};
+
+static struct clksrc_clk clk_mout_apll = {
+	.clk	= {
+		.name		= "mout_apll",
+		.id		= -1,
+	},
+	.shift		= S5PC1XX_CLKSRC0_APLL_SHIFT,
+	.mask		= S5PC1XX_CLKSRC0_APLL_MASK,
+	.sources	= &clk_src_apll,
+	.reg_source	= S5PC1XX_CLK_SRC0,
+};
+
+static struct clk clk_fout_epll = {
+	.name		= "fout_epll",
+	.id		= -1,
+};
+
+static struct clk *clk_src_epll_list[] = {
+	[0] = &clk_fin_epll,
+	[1] = &clk_fout_epll,
+};
+
+static struct clk_sources clk_src_epll = {
+	.sources	= clk_src_epll_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_epll_list),
+};
+
+static struct clksrc_clk clk_mout_epll = {
+	.clk	= {
+		.name		= "mout_epll",
+		.id		= -1,
+	},
+	.shift		= S5PC1XX_CLKSRC0_EPLL_SHIFT,
+	.mask		= S5PC1XX_CLKSRC0_EPLL_MASK,
+	.sources	= &clk_src_epll,
+	.reg_source	= S5PC1XX_CLK_SRC0,
+};
+
+static struct clk *clk_src_mpll_list[] = {
+	[0] = &clk_fin_mpll,
+	[1] = &clk_fout_mpll,
+};
+
+static struct clk_sources clk_src_mpll = {
+	.sources	= clk_src_mpll_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_mpll_list),
+};
+
+static struct clksrc_clk clk_mout_mpll = {
+	.clk = {
+		.name		= "mout_mpll",
+		.id		= -1,
+	},
+	.shift		= S5PC1XX_CLKSRC0_MPLL_SHIFT,
+	.mask		= S5PC1XX_CLKSRC0_MPLL_MASK,
+	.sources	= &clk_src_mpll,
+	.reg_source	= S5PC1XX_CLK_SRC0,
+};
+
+static unsigned long s5pc1xx_clk_doutmpll_get_rate(struct clk *clk)
+{
+	unsigned long rate = clk_get_rate(clk->parent);
+	unsigned long clkdiv;
+
+	printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
+
+	clkdiv = __raw_readl(S5PC1XX_CLK_DIV1) & S5PC100_CLKDIV1_MPLL_MASK;
+	rate /= (clkdiv >> S5PC100_CLKDIV1_MPLL_SHIFT) + 1;
+
+	return rate;
+}
+
+static struct clk clk_dout_mpll = {
+	.name		= "dout_mpll",
+	.id		= -1,
+	.parent		= &clk_mout_mpll.clk,
+	.get_rate	= s5pc1xx_clk_doutmpll_get_rate,
+};
+
+static unsigned long s5pc1xx_clk_doutmpll2_get_rate(struct clk *clk)
+{
+	unsigned long rate = clk_get_rate(clk->parent);
+	unsigned long clkdiv;
+
+	printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
+
+	clkdiv = __raw_readl(S5PC1XX_CLK_DIV1) & S5PC100_CLKDIV1_MPLL2_MASK;
+	rate /= (clkdiv >> S5PC100_CLKDIV1_MPLL2_SHIFT) + 1;
+
+	return rate;
+}
+
+struct clk clk_dout_mpll2 = {
+	.name		= "dout_mpll2",
+	.id		= -1,
+	.parent		= &clk_mout_mpll.clk,
+	.get_rate	= s5pc1xx_clk_doutmpll2_get_rate,
+};
+
+static struct clk *clkset_uart_list[] = {
+	&clk_mout_epll.clk,
+	&clk_dout_mpll,
+	NULL,
+	NULL
+};
+
+static struct clk_sources clkset_uart = {
+	.sources	= clkset_uart_list,
+	.nr_sources	= ARRAY_SIZE(clkset_uart_list),
+};
+
+static inline struct clksrc_clk *to_clksrc(struct clk *clk)
+{
+	return container_of(clk, struct clksrc_clk, clk);
+}
+
+static unsigned long s5pc1xx_getrate_clksrc(struct clk *clk)
+{
+	struct clksrc_clk *sclk = to_clksrc(clk);
+	unsigned long rate = clk_get_rate(clk->parent);
+	u32 clkdiv = __raw_readl(sclk->reg_divider);
+
+	clkdiv >>= sclk->divider_shift;
+	clkdiv &= 0xf;
+	clkdiv++;
+
+	rate /= clkdiv;
+	return rate;
+}
+
+static int s5pc1xx_setrate_clksrc(struct clk *clk, unsigned long rate)
+{
+	struct clksrc_clk *sclk = to_clksrc(clk);
+	void __iomem *reg = sclk->reg_divider;
+	unsigned int div;
+	u32 val;
+
+	rate = clk_round_rate(clk, rate);
+	div = clk_get_rate(clk->parent) / rate;
+	if (div > 16)
+		return -EINVAL;
+
+	val = __raw_readl(reg);
+	val &= ~(0xf << sclk->shift);
+	val |= (div - 1) << sclk->shift;
+	__raw_writel(val, reg);
+
+	return 0;
+}
+
+static int s5pc1xx_setparent_clksrc(struct clk *clk, struct clk *parent)
+{
+	struct clksrc_clk *sclk = to_clksrc(clk);
+	struct clk_sources *srcs = sclk->sources;
+	u32 clksrc = __raw_readl(sclk->reg_source);
+	int src_nr = -1;
+	int ptr;
+
+	for (ptr = 0; ptr < srcs->nr_sources; ptr++)
+		if (srcs->sources[ptr] == parent) {
+			src_nr = ptr;
+			break;
+		}
+
+	if (src_nr >= 0) {
+		clksrc &= ~sclk->mask;
+		clksrc |= src_nr << sclk->shift;
+
+		__raw_writel(clksrc, sclk->reg_source);
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
+static unsigned long s5pc1xx_roundrate_clksrc(struct clk *clk,
+					      unsigned long rate)
+{
+	unsigned long parent_rate = clk_get_rate(clk->parent);
+	int div;
+
+	if (rate > parent_rate)
+		rate = parent_rate;
+	else {
+		div = rate / parent_rate;
+
+		if (div == 0)
+			div = 1;
+		if (div > 16)
+			div = 16;
+
+		rate = parent_rate / div;
+	}
+
+	return rate;
+}
+
+static struct clksrc_clk clk_uart_uclk1 = {
+	.clk	= {
+		.name		= "uclk1",
+		.id		= -1,
+		.ctrlbit        = S5PC100_CLKGATE_SCLK0_UART,
+		.enable		= s5pc1xx_sclk0_ctrl,
+		.set_parent	= s5pc1xx_setparent_clksrc,
+		.get_rate	= s5pc1xx_getrate_clksrc,
+		.set_rate	= s5pc1xx_setrate_clksrc,
+		.round_rate	= s5pc1xx_roundrate_clksrc,
+	},
+	.shift		= S5PC100_CLKSRC1_UART_SHIFT,
+	.mask		= S5PC100_CLKSRC1_UART_MASK,
+	.sources	= &clkset_uart,
+	.divider_shift	= S5PC100_CLKDIV2_UART_SHIFT,
+	.reg_divider	= S5PC1XX_CLK_DIV2,
+	.reg_source	= S5PC1XX_CLK_SRC1,
+};
+
+/* Clock initialisation code */
+
+static struct clksrc_clk *init_parents[] = {
+	&clk_mout_apll,
+	&clk_mout_epll,
+	&clk_mout_mpll,
+	&clk_uart_uclk1,
+};
+
+static void __init_or_cpufreq s5pc1xx_set_clksrc(struct clksrc_clk *clk)
+{
+	struct clk_sources *srcs = clk->sources;
+	u32 clksrc = __raw_readl(clk->reg_source);
+
+	clksrc &= clk->mask;
+	clksrc >>= clk->shift;
+
+	if (clksrc > srcs->nr_sources || !srcs->sources[clksrc]) {
+		printk(KERN_ERR "%s: bad source %d\n",
+		       clk->clk.name, clksrc);
+		return;
+	}
+
+	clk->clk.parent = srcs->sources[clksrc];
+
+	printk(KERN_INFO "%s: source is %s (%d), rate is %ld\n",
+	       clk->clk.name, clk->clk.parent->name, clksrc,
+	       clk_get_rate(&clk->clk));
+}
+
+#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)
+
+void __init_or_cpufreq s5pc100_setup_clocks(void)
+{
+	struct clk *xtal_clk;
+	unsigned long xtal;
+	unsigned long armclk;
+	unsigned long hclkd0;
+	unsigned long hclk;
+	unsigned long pclkd0;
+	unsigned long pclk;
+	unsigned long apll;
+	unsigned long mpll;
+	unsigned long hpll;
+	unsigned long epll;
+	unsigned int ptr;
+	u32 clkdiv0, clkdiv1;
+
+	printk(KERN_DEBUG "%s: registering clocks\n", __func__);
+
+	clkdiv0 = __raw_readl(S5PC1XX_CLK_DIV0);
+	clkdiv1 = __raw_readl(S5PC1XX_CLK_DIV1);
+
+	printk(KERN_DEBUG "%s: clkdiv0 = %08x, clkdiv1 = %08x\n",
+			__func__, clkdiv0, clkdiv1);
+
+	xtal_clk = clk_get(NULL, "xtal");
+	BUG_ON(IS_ERR(xtal_clk));
+
+	xtal = clk_get_rate(xtal_clk);
+	clk_put(xtal_clk);
+
+	printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
+
+	apll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC1XX_APLL_CON));
+	mpll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC1XX_MPLL_CON));
+	epll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC1XX_EPLL_CON));
+	hpll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC100_HPLL_CON));
+
+	printk(KERN_INFO "S5PC100: PLL settings, A=%ld, M=%ld, E=%ld, H=%ld\n",
+	       apll, mpll, epll, hpll);
+
+	armclk = apll / GET_DIV(clkdiv0, S5PC1XX_CLKDIV0_APLL);
+	armclk = armclk / GET_DIV(clkdiv0, S5PC100_CLKDIV0_ARM);
+	hclkd0 = armclk / GET_DIV(clkdiv0, S5PC100_CLKDIV0_D0);
+	pclkd0 = hclkd0 / GET_DIV(clkdiv0, S5PC100_CLKDIV0_PCLKD0);
+	hclk = mpll / GET_DIV(clkdiv1, S5PC100_CLKDIV1_D1);
+	pclk = hclk / GET_DIV(clkdiv1, S5PC100_CLKDIV1_PCLKD1);
+
+	printk(KERN_INFO "S5PC100: ARMCLK=%ld, HCLKD0=%ld, PCLKD0=%ld, HCLK=%ld, PCLK=%ld\n",
+	       armclk, hclkd0, pclkd0, hclk, pclk);
+
+	clk_fout_apll.rate = apll;
+	clk_fout_mpll.rate = mpll;
+	clk_fout_epll.rate = epll;
+	clk_fout_apll.rate = apll;
+
+	clk_h.rate = hclk;
+	clk_p.rate = pclk;
+
+	for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++)
+		s5pc1xx_set_clksrc(init_parents[ptr]);
+}
+
+static struct clk *clks[] __initdata = {
+	&clk_ext_xtal_mux,
+	&clk_mout_epll.clk,
+	&clk_fout_epll,
+	&clk_mout_mpll.clk,
+	&clk_dout_mpll,
+	&clk_uart_uclk1.clk,
+	&clk_ext,
+	&clk_epll,
+	&clk_27m,
+	&clk_48m,
+	&clk_54m,
+};
+
+void __init s5pc100_register_clocks(void)
+{
+	struct clk *clkp;
+	int ret;
+	int ptr;
+
+	for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) {
+		clkp = clks[ptr];
+		ret = s3c24xx_register_clock(clkp);
+		if (ret < 0) {
+			printk(KERN_ERR "Failed to register clock %s (%d)\n",
+			       clkp->name, ret);
+		}
+	}
+
+	clk_mpll.parent = &clk_mout_mpll.clk;
+	clk_epll.parent = &clk_mout_epll.clk;
+}
-- 
cgit v1.2.3


From 5a7652f2032b88106c9ba41edf0fb795397008bd Mon Sep 17 00:00:00 2001
From: Byungho Min <bhminjames@gmail.com>
Date: Tue, 23 Jun 2009 21:39:42 +0900
Subject: ARM: S5PC100: Kconfigs and Makefiles

S5PC100 is a new SoC with ARM coretex-A8 and numerous peripherals. This SoC is
successor of S3C64XX. S5PC100 has peripherals which are still similar to S3C
families so some drivers in "arch/arm/plat-s3c" can be shared. S5PC100 specific
drivers will be added in "arch/arm/plat-s5pcxx" or "arch/arm/mach-s5pc100"

Signed-off-by: Byungho Min <bhmin@samsung.com>
[ben-linux@fluff.org: tidy and edit description]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/Kconfig                              | 13 +++++++
 arch/arm/Makefile                             |  2 ++
 arch/arm/mach-s5pc100/Kconfig                 | 22 ++++++++++++
 arch/arm/mach-s5pc100/Makefile                | 17 +++++++++
 arch/arm/mach-s5pc100/Makefile.boot           |  2 ++
 arch/arm/mach-s5pc100/include/mach/hardware.h |  2 +-
 arch/arm/plat-s5pc1xx/Kconfig                 | 50 +++++++++++++++++++++++++++
 arch/arm/plat-s5pc1xx/Makefile                | 26 ++++++++++++++
 8 files changed, 133 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/mach-s5pc100/Kconfig
 create mode 100644 arch/arm/mach-s5pc100/Makefile
 create mode 100644 arch/arm/mach-s5pc100/Makefile.boot
 create mode 100644 arch/arm/plat-s5pc1xx/Kconfig
 create mode 100644 arch/arm/plat-s5pc1xx/Makefile

(limited to 'arch')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index f07a4ba281b..be89ab3aacf 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -588,6 +588,14 @@ config ARCH_S3C64XX
 	help
 	  Samsung S3C64XX series based systems
 
+config ARCH_S5PC1XX
+	bool "Samsung S5PC1XX"
+	select GENERIC_GPIO
+	select HAVE_CLK
+	select CPU_V7
+	help
+	  Samsung S5PC1XX series based systems
+
 config ARCH_SHARK
 	bool "Shark"
 	select CPU_SA110
@@ -698,6 +706,7 @@ source "arch/arm/mach-kirkwood/Kconfig"
 source "arch/arm/plat-s3c24xx/Kconfig"
 source "arch/arm/plat-s3c64xx/Kconfig"
 source "arch/arm/plat-s3c/Kconfig"
+source "arch/arm/plat-s5pc1xx/Kconfig"
 
 if ARCH_S3C2410
 source "arch/arm/mach-s3c2400/Kconfig"
@@ -715,6 +724,10 @@ endif
 
 source "arch/arm/plat-stmp3xxx/Kconfig"
 
+if ARCH_S5PC1XX
+source "arch/arm/mach-s5pc100/Kconfig"
+endif
+
 source "arch/arm/mach-lh7a40x/Kconfig"
 
 source "arch/arm/mach-h720x/Kconfig"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index c877d6df23d..96659415953 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -150,6 +150,7 @@ machine-$(CONFIG_ARCH_RPC)		:= rpc
 machine-$(CONFIG_ARCH_S3C2410)		:= s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443
 machine-$(CONFIG_ARCH_S3C24A0)		:= s3c24a0
 machine-$(CONFIG_ARCH_S3C64XX)		:= s3c6400 s3c6410
+machine-$(CONFIG_ARCH_S5PC1XX)		:= s5pc100
 machine-$(CONFIG_ARCH_SA1100)		:= sa1100
 machine-$(CONFIG_ARCH_SHARK)		:= shark
 machine-$(CONFIG_ARCH_STMP378X)		:= stmp378x
@@ -168,6 +169,7 @@ plat-$(CONFIG_PLAT_ORION)	:= orion
 plat-$(CONFIG_PLAT_PXA)		:= pxa
 plat-$(CONFIG_PLAT_S3C24XX)	:= s3c24xx s3c
 plat-$(CONFIG_PLAT_S3C64XX)	:= s3c64xx s3c
+plat-$(CONFIG_PLAT_S5PC1XX)	:= s5pc1xx s3c
 plat-$(CONFIG_ARCH_STMP3XXX)	:= stmp3xxx
 
 ifeq ($(CONFIG_ARCH_EBSA110),y)
diff --git a/arch/arm/mach-s5pc100/Kconfig b/arch/arm/mach-s5pc100/Kconfig
new file mode 100644
index 00000000000..b1a4ba50441
--- /dev/null
+++ b/arch/arm/mach-s5pc100/Kconfig
@@ -0,0 +1,22 @@
+# arch/arm/mach-s5pc100/Kconfig
+#
+# Copyright 2009 Samsung Electronics Co.
+#	Byungho Min <bhmin@samsung.com>
+#
+# Licensed under GPLv2
+
+# Configuration options for the S5PC100 CPU
+
+config CPU_S5PC100
+	bool
+	select CPU_S5PC100_INIT
+	select CPU_S5PC100_CLOCK
+	help
+	  Enable S5PC100 CPU support
+
+config MACH_SMDKC100
+	bool "SMDKC100"
+	select CPU_S5PC100
+	select S5PC1XX_SETUP_I2C1
+	help
+	  Machine support for the Samsung SMDKC100
diff --git a/arch/arm/mach-s5pc100/Makefile b/arch/arm/mach-s5pc100/Makefile
new file mode 100644
index 00000000000..afc89b381d7
--- /dev/null
+++ b/arch/arm/mach-s5pc100/Makefile
@@ -0,0 +1,17 @@
+# arch/arm/mach-s5pc100/Makefile
+#
+# Copyright 2009 Samsung Electronics Co.
+#
+# Licensed under GPLv2
+
+obj-y				:=
+obj-m				:=
+obj-n				:=
+obj-				:=
+
+# Core support for S5PC100 system
+
+obj-$(CONFIG_CPU_S5PC100)	+= cpu.o
+
+# machine support
+obj-$(CONFIG_MACH_SMDKC100)	+= mach-smdkc100.o
diff --git a/arch/arm/mach-s5pc100/Makefile.boot b/arch/arm/mach-s5pc100/Makefile.boot
new file mode 100644
index 00000000000..ff90aa13bd6
--- /dev/null
+++ b/arch/arm/mach-s5pc100/Makefile.boot
@@ -0,0 +1,2 @@
+   zreladdr-y	:= 0x20008000
+params_phys-y	:= 0x20000100
diff --git a/arch/arm/mach-s5pc100/include/mach/hardware.h b/arch/arm/mach-s5pc100/include/mach/hardware.h
index 38ce8206a1a..6b38618c2fd 100644
--- a/arch/arm/mach-s5pc100/include/mach/hardware.h
+++ b/arch/arm/mach-s5pc100/include/mach/hardware.h
@@ -3,7 +3,7 @@
  * Copyright 2009 Samsung Electronics Co.
  *      Byungho Min <bhmin@samsung.com>
  *
- * S3C6400 - Hardware support
+ * S5PC100 - Hardware support
  */
 
 #ifndef __ASM_ARCH_HARDWARE_H
diff --git a/arch/arm/plat-s5pc1xx/Kconfig b/arch/arm/plat-s5pc1xx/Kconfig
new file mode 100644
index 00000000000..a8a711c3c06
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/Kconfig
@@ -0,0 +1,50 @@
+# arch/arm/plat-s5pc1xx/Kconfig
+#
+# Copyright 2009 Samsung Electronics Co.
+#	Byungho Min <bhmin@samsung.com>
+#
+# Licensed under GPLv2
+
+config PLAT_S5PC1XX
+	bool
+	depends on ARCH_S5PC1XX
+	default y
+	select PLAT_S3C
+	select ARM_VIC
+	select NO_IOPORT
+	select ARCH_REQUIRE_GPIOLIB
+	select S3C_GPIO_TRACK
+	select S3C_GPIO_PULL_UPDOWN
+	help
+	  Base platform code for any Samsung S5PC1XX device
+
+if PLAT_S5PC1XX
+
+# Configuration options shared by all S3C64XX implementations
+
+config CPU_S5PC100_INIT
+	bool
+	help
+	  Common initialisation code for the S5PC1XX
+
+config CPU_S5PC100_CLOCK
+	bool
+	help
+	  Common clock support code for the S5PC1XX
+
+# platform specific device setup
+
+config S5PC100_SETUP_I2C0
+	bool
+	default y
+	help
+	  Common setup code for i2c bus 0.
+
+	  Note, currently since i2c0 is always compiled, this setup helper
+	  is always compiled with it.
+
+config S5PC100_SETUP_I2C1
+	bool
+	help
+	  Common setup code for i2c bus 1.
+endif
diff --git a/arch/arm/plat-s5pc1xx/Makefile b/arch/arm/plat-s5pc1xx/Makefile
new file mode 100644
index 00000000000..f1ecb2c37ee
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/Makefile
@@ -0,0 +1,26 @@
+# arch/arm/plat-s5pc1xx/Makefile
+#
+# Copyright 2009 Samsung Electronics Co.
+#
+# Licensed under GPLv2
+
+obj-y				:=
+obj-m				:=
+obj-n				:= dummy.o
+obj-				:=
+
+# Core files
+
+obj-y				+= dev-uart.o
+obj-y				+= cpu.o
+obj-y				+= irq.o
+
+# CPU support
+
+obj-$(CONFIG_CPU_S5PC100_INIT)	+= s5pc100-init.o
+obj-$(CONFIG_CPU_S5PC100_CLOCK)	+= s5pc100-clock.o
+
+# Device setup
+
+obj-$(CONFIG_S5PC100_SETUP_I2C0) += setup-i2c0.o
+obj-$(CONFIG_S5PC100_SETUP_I2C1) += setup-i2c1.o
-- 
cgit v1.2.3


From e119766f4e15274e2cd9bb5f25119c8b008d920b Mon Sep 17 00:00:00 2001
From: Byungho Min <bhminjames@gmail.com>
Date: Tue, 23 Jun 2009 21:40:28 +0900
Subject: ARM: S5PC100: Board and configuration file

SMDKC100 board support.
The board can be obtained from meritech (http://www.meritech.co.kr)

Signed-off-by: Byungho Min <bhmin@samsung.com>
[ben-linux@fluff.org: fixup subject and description]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/configs/s5pc100_defconfig    | 892 ++++++++++++++++++++++++++++++++++
 arch/arm/mach-s5pc100/mach-smdkc100.c | 103 ++++
 2 files changed, 995 insertions(+)
 create mode 100644 arch/arm/configs/s5pc100_defconfig
 create mode 100644 arch/arm/mach-s5pc100/mach-smdkc100.c

(limited to 'arch')

diff --git a/arch/arm/configs/s5pc100_defconfig b/arch/arm/configs/s5pc100_defconfig
new file mode 100644
index 00000000000..b0d7d3d3a5e
--- /dev/null
+++ b/arch/arm/configs/s5pc100_defconfig
@@ -0,0 +1,892 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30
+# Wed Jul  1 15:53:07 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_MMU=y
+CONFIG_NO_IOPORT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+# CONFIG_SYSVIPC is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Performance Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+CONFIG_ARCH_S5PC1XX=y
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+CONFIG_PLAT_S3C=y
+
+#
+# Boot options
+#
+# CONFIG_S3C_BOOT_ERROR_RESET is not set
+CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
+
+#
+# Power management
+#
+CONFIG_S3C_LOWLEVEL_UART_PORT=0
+CONFIG_S3C_GPIO_SPACE=0
+CONFIG_S3C_GPIO_TRACK=y
+CONFIG_S3C_GPIO_PULL_UPDOWN=y
+CONFIG_PLAT_S5PC1XX=y
+CONFIG_CPU_S5PC100_INIT=y
+CONFIG_CPU_S5PC100_CLOCK=y
+CONFIG_S5PC100_SETUP_I2C0=y
+CONFIG_CPU_S5PC100=y
+CONFIG_MACH_SMDKC100=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_IFAR=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_ARM_VIC=y
+CONFIG_ARM_VIC_NR=2
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=cramfs init=/linuxrc console=ttySAC2,115200 mem=128M"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_MG_DISK is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=y
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_CONSOLE is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SAMSUNG=y
+CONFIG_SERIAL_SAMSUNG_UARTS=3
+# CONFIG_SERIAL_SAMSUNG_DEBUG is not set
+CONFIG_SERIAL_SAMSUNG_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HID_DEBUG=y
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_MMC=y
+CONFIG_MMC_DEBUG=y
+CONFIG_MMC_UNSAFE_RESUME=y
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=y
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_SDHCI=y
+# CONFIG_MMC_SDHCI_PLTFM is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_PI_LIST=y
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+CONFIG_DEBUG_S3C_PORT=y
+CONFIG_DEBUG_S3C_UART=0
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c
new file mode 100644
index 00000000000..214093cd763
--- /dev/null
+++ b/arch/arm/mach-s5pc100/mach-smdkc100.c
@@ -0,0 +1,103 @@
+/* linux/arch/arm/mach-s5pc100/mach-smdkc100.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ * Author: Byungho Min <bhmin@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/fb.h>
+#include <linux/delay.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/map.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/s5pc100.h>
+
+#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
+#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
+#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
+
+static struct s3c2410_uartcfg smdkc100_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
+	},
+	[2] = {
+		.hwport	     = 2,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
+	},
+	[3] = {
+		.hwport	     = 3,
+		.flags	     = 0,
+		.ucon	     = 0x3c5,
+		.ulcon	     = 0x03,
+		.ufcon	     = 0x51,
+	},
+};
+
+static struct map_desc smdkc100_iodesc[] = {};
+
+static struct platform_device *smdkc100_devices[] __initdata = {
+};
+
+static void __init smdkc100_map_io(void)
+{
+	s5pc1xx_init_io(smdkc100_iodesc, ARRAY_SIZE(smdkc100_iodesc));
+	s3c24xx_init_clocks(12000000);
+	s3c24xx_init_uarts(smdkc100_uartcfgs, ARRAY_SIZE(smdkc100_uartcfgs));
+}
+
+static void __init smdkc100_machine_init(void)
+{
+	platform_add_devices(smdkc100_devices, ARRAY_SIZE(smdkc100_devices));
+}
+
+MACHINE_START(SMDKC100, "SMDKC100")
+	/* Maintainer: Byungho Min <bhmin@samsung.com> */
+	.phys_io	= S5PC1XX_PA_UART & 0xfff00000,
+	.io_pg_offst	= (((u32)S5PC1XX_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S5PC100_PA_SDRAM + 0x100,
+
+	.init_irq	= s5pc100_init_irq,
+	.map_io		= smdkc100_map_io,
+	.init_machine	= smdkc100_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
-- 
cgit v1.2.3


From db616eb67604242c11bfbb331bb143bfe4a2e386 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Sun, 16 Aug 2009 23:54:58 +0100
Subject: ARM: S3C: Add S3C_DEV_NAND Kconfig entry

Currently the S5PC100 does not define S3C_PA_NAND, leaving the NAND device
definitions in arch/arm/plat-s3c/dev-nand.c unbuildable. Add a KConfig
entry to select whether this is built.

As backwards compatibility, both the S3C24XX and S3C64XX define the new
configuration in their main Kconfig files until better support for basing
this selection on a per-machine basis can be sorted out.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c/Kconfig     | 5 +++++
 arch/arm/plat-s3c/Makefile    | 2 +-
 arch/arm/plat-s3c24xx/Kconfig | 1 +
 arch/arm/plat-s3c64xx/Kconfig | 1 +
 4 files changed, 8 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/plat-s3c/Kconfig b/arch/arm/plat-s3c/Kconfig
index 935c7558469..8931c5f0e46 100644
--- a/arch/arm/plat-s3c/Kconfig
+++ b/arch/arm/plat-s3c/Kconfig
@@ -198,4 +198,9 @@ config S3C_DEV_USB_HSOTG
 	help
 	  Compile in platform device definition for USB high-speed OtG
 
+config S3C_DEV_NAND
+	bool
+	help
+	  Compile in platform device definition for NAND controller
+
 endif
diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile
index f32d045e7e3..3c09109e9e8 100644
--- a/arch/arm/plat-s3c/Makefile
+++ b/arch/arm/plat-s3c/Makefile
@@ -41,4 +41,4 @@ obj-$(CONFIG_S3C_DEV_I2C1)	+= dev-i2c1.o
 obj-$(CONFIG_S3C_DEV_FB)	+= dev-fb.o
 obj-$(CONFIG_S3C_DEV_USB_HOST)	+= dev-usb.o
 obj-$(CONFIG_S3C_DEV_USB_HSOTG)	+= dev-usb-hsotg.o
-obj-y				+= dev-nand.o
+obj-$(CONFIG_S3C_DEV_NAND)	+= dev-nand.o
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index 2f914568359..9c7aca48964 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -10,6 +10,7 @@ config PLAT_S3C24XX
 	default y
 	select NO_IOPORT
 	select ARCH_REQUIRE_GPIOLIB
+	select S3C_DEVICE_NAND
 	help
 	  Base platform code for any Samsung S3C24XX device
 
diff --git a/arch/arm/plat-s3c64xx/Kconfig b/arch/arm/plat-s3c64xx/Kconfig
index 5ebd8b425a5..bcfa778614d 100644
--- a/arch/arm/plat-s3c64xx/Kconfig
+++ b/arch/arm/plat-s3c64xx/Kconfig
@@ -19,6 +19,7 @@ config PLAT_S3C64XX
 	select S3C_GPIO_PULL_UPDOWN
 	select S3C_GPIO_CFG_S3C24XX
 	select S3C_GPIO_CFG_S3C64XX
+	select S3C_DEV_NAND
 	select USB_ARCH_HAS_OHCI
 	help
 	  Base platform code for any Samsung S3C64XX device
-- 
cgit v1.2.3


From baa28e3530375e0bef2c53243634a1c78f5c02f3 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Mon, 3 Aug 2009 15:11:29 +0100
Subject: ARM: Show FIQ in /proc/interrupts on CONFIG_FIQ

The show_fiq_list() call in arch/arm/kernel/irq.c currently depends on
CONFIG_ARCH_ACORN, but this is not the only architecture that supports
the usage of FIQ. Change to calling this if CONFIG_FIQ is set (which
is what arch/arm/kernel/fiq.c is built by).

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/kernel/irq.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index b7c3490eaa2..c9a8619f385 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -86,7 +86,7 @@ int show_interrupts(struct seq_file *p, void *v)
 unlock:
 		spin_unlock_irqrestore(&irq_desc[i].lock, flags);
 	} else if (i == NR_IRQS) {
-#ifdef CONFIG_ARCH_ACORN
+#ifdef CONFIG_FIQ
 		show_fiq_list(p, v);
 #endif
 #ifdef CONFIG_SMP
-- 
cgit v1.2.3


From 48e46b7b311c54525712c28004f0a59f2c931d30 Mon Sep 17 00:00:00 2001
From: Jurij Smakov <jurij@wooyd.org>
Date: Sun, 16 Aug 2009 18:21:47 -0700
Subject: sparc64: build compressed image (zImage) by default

Besides creating the uncompressed vmlinux image for sparc64, also
create a compressed zImage. This is more consistent with other
architectures and required to make the 'deb-pkg' target work.

Signed-off-by: Jurij Smakov <jurij@wooyd.org>
Signed-off-by: Frans Pop <elendil@planet.nl>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/Makefile      | 12 ++++++------
 arch/sparc/boot/Makefile |  3 +++
 2 files changed, 9 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/sparc/Makefile b/arch/sparc/Makefile
index 2003ded054c..467221dd570 100644
--- a/arch/sparc/Makefile
+++ b/arch/sparc/Makefile
@@ -38,10 +38,6 @@ CPPFLAGS_vmlinux.lds += -m32
 #  Actual linking is done with "make image".
 LDFLAGS_vmlinux = -r
 
-# Default target
-all: zImage
-
-
 else
 #####
 # sparc64
@@ -91,6 +87,9 @@ endif
 
 boot := arch/sparc/boot
 
+# Default target
+all: zImage
+
 image zImage tftpboot.img vmlinux.aout: vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
 
@@ -109,8 +108,9 @@ define archhelp
 endef
 else
 define archhelp
-  echo  '* vmlinux       - Standard sparc64 kernel'
-  echo  '  vmlinux.aout  - a.out kernel for sparc64'
+  echo  '* vmlinux      - standard sparc64 kernel'
+  echo  '* zImage       - stripped and compressed sparc64 kernel ($(boot)/zImage)'
+  echo  '  vmlinux.aout - a.out kernel for sparc64'
   echo  '  tftpboot.img - image prepared for tftp'
 endef
 endif
diff --git a/arch/sparc/boot/Makefile b/arch/sparc/boot/Makefile
index 1ff0fd92475..97e3feb9ff1 100644
--- a/arch/sparc/boot/Makefile
+++ b/arch/sparc/boot/Makefile
@@ -79,6 +79,9 @@ $(obj)/image: vmlinux FORCE
 	$(call if_changed,strip)
 	@echo '  kernel: $@ is ready'
 
+$(obj)/zImage: $(obj)/image
+	$(call if_changed,gzip)
+
 $(obj)/tftpboot.img: $(obj)/image $(obj)/piggyback_64 System.map $(ROOT_IMG) FORCE
 	$(call if_changed,elftoaout)
 	$(call if_changed,piggy)
-- 
cgit v1.2.3


From 3f389635102e0dd2f85ebfe7fd549942b5bbc33b Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinder@kernel.org>
Date: Wed, 12 Aug 2009 22:49:47 +0000
Subject: SPARC: fix duplicate declaration

Only difference for 32 and 64 bit version is dma64_addr_t and rest is same.

Also fixed the following 'make includecheck' warning:

  arch/sparc/include/asm/types.h: asm-generic/int-ll64.h is included more than once.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/include/asm/types.h | 27 +++++++--------------------
 1 file changed, 7 insertions(+), 20 deletions(-)

(limited to 'arch')

diff --git a/arch/sparc/include/asm/types.h b/arch/sparc/include/asm/types.h
index de671d73bae..09c79a9c851 100644
--- a/arch/sparc/include/asm/types.h
+++ b/arch/sparc/include/asm/types.h
@@ -8,9 +8,8 @@
  * need to be careful to avoid a name clashes.
  */
 
-#if defined(__sparc__) && defined(__arch64__)
+#if defined(__sparc__)
 
-/*** SPARC 64 bit ***/
 #include <asm-generic/int-ll64.h>
 
 #ifndef __ASSEMBLY__
@@ -26,33 +25,21 @@ typedef unsigned short umode_t;
 /* Dma addresses come in generic and 64-bit flavours.  */
 
 typedef u32 dma_addr_t;
-typedef u64 dma64_addr_t;
 
-#endif /* __ASSEMBLY__ */
+#if defined(__arch64__)
 
-#endif /* __KERNEL__ */
+/*** SPARC 64 bit ***/
+typedef u64 dma64_addr_t;
 #else
-
 /*** SPARC 32 bit ***/
-#include <asm-generic/int-ll64.h>
-
-#ifndef __ASSEMBLY__
-
-typedef unsigned short umode_t;
-
-#endif /* __ASSEMBLY__ */
-
-#ifdef __KERNEL__
-
-#ifndef __ASSEMBLY__
-
-typedef u32 dma_addr_t;
 typedef u32 dma64_addr_t;
 
+#endif /* defined(__arch64__) */
+
 #endif /* __ASSEMBLY__ */
 
 #endif /* __KERNEL__ */
 
-#endif /* defined(__sparc__) && defined(__arch64__) */
+#endif /* defined(__sparc__) */
 
 #endif /* defined(_SPARC_TYPES_H) */
-- 
cgit v1.2.3


From 8abf9196008a7f06841b10769d1aed3f28c1d314 Mon Sep 17 00:00:00 2001
From: Alexey Dobriyan <adobriyan@gmail.com>
Date: Thu, 13 Aug 2009 10:05:43 +0000
Subject: sparc64: cheaper asm/uaccess.h inclusion

sched.h inclusion is definitely not needed like in 32-bit version,
remove it, fixup compilation.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/include/asm/uaccess_64.h | 2 +-
 arch/sparc/kernel/sysfs.c           | 1 +
 2 files changed, 2 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/sparc/include/asm/uaccess_64.h b/arch/sparc/include/asm/uaccess_64.h
index a38c0323891..9ea271e19c7 100644
--- a/arch/sparc/include/asm/uaccess_64.h
+++ b/arch/sparc/include/asm/uaccess_64.h
@@ -7,8 +7,8 @@
 
 #ifdef __KERNEL__
 #include <linux/compiler.h>
-#include <linux/sched.h>
 #include <linux/string.h>
+#include <linux/thread_info.h>
 #include <asm/asi.h>
 #include <asm/system.h>
 #include <asm/spitfire.h>
diff --git a/arch/sparc/kernel/sysfs.c b/arch/sparc/kernel/sysfs.c
index d28f496f466..ca39c606fe8 100644
--- a/arch/sparc/kernel/sysfs.c
+++ b/arch/sparc/kernel/sysfs.c
@@ -2,6 +2,7 @@
  *
  * Copyright (C) 2007 David S. Miller <davem@davemloft.net>
  */
+#include <linux/sched.h>
 #include <linux/sysdev.h>
 #include <linux/cpu.h>
 #include <linux/smp.h>
-- 
cgit v1.2.3


From 62a3207b8cf3de35368cdc3822b30b82d59eea95 Mon Sep 17 00:00:00 2001
From: "H. Peter Anvin" <hpa@zytor.com>
Date: Mon, 17 Aug 2009 11:16:16 -0700
Subject: x86, intel_txt: Handle ACPI_SLEEP without X86_TRAMPOLINE

On 32 bits, we can have CONFIG_ACPI_SLEEP set without implying
CONFIG_X86_TRAMPOLINE.  In that case, we simply do not need to mark
the trampoline as a MAC region.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Shane Wang <shane.wang@intel.com>
Cc: Joseph Cihula <joseph.cihula@intel.com>
---
 arch/x86/kernel/tboot.c | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kernel/tboot.c b/arch/x86/kernel/tboot.c
index a183beffe39..c2e760ca7b0 100644
--- a/arch/x86/kernel/tboot.c
+++ b/arch/x86/kernel/tboot.c
@@ -189,8 +189,12 @@ static int tboot_setup_sleep(void)
 
 	/* S3 resume code */
 	add_mac_region(acpi_wakeup_address, WAKEUP_SIZE);
+
+#ifdef CONFIG_X86_TRAMPOLINE
 	/* AP trampoline code */
 	add_mac_region(virt_to_phys(trampoline_base), TRAMPOLINE_SIZE);
+#endif
+
 	/* kernel code + data + bss */
 	add_mac_region(virt_to_phys(_text), _end - _text);
 
-- 
cgit v1.2.3


From b7f42ab2e237f08a5bbcefa17473e80eb05e725c Mon Sep 17 00:00:00 2001
From: Yinghai Lu <yinghai@kernel.org>
Date: Mon, 17 Aug 2009 11:19:40 -0700
Subject: x86, apic: Move dmar_table_init() out of enable_IR()

On an x2apic system, we got:

[    1.818072] ------------[ cut here ]------------
[    1.820376] WARNING: at kernel/lockdep.c:2461 lockdep_trace_alloc+0xa5/0xe9()
[    1.835282] Hardware name: ASSY,
[    1.839006] Modules linked in:
[    1.841253] Pid: 1, comm: swapper Not tainted 2.6.31-rc5-tip-03926-g39aaa80-dirty #510
[    1.858056] Call Trace:
[    1.859913]  [<ffffffff810d13aa>] ? lockdep_trace_alloc+0xa5/0xe9
[    1.876270]  [<ffffffff81093f37>] warn_slowpath_common+0x8d/0xd0
[    1.879132]  [<ffffffff81093fa1>] warn_slowpath_null+0x27/0x3d
[    1.896823]  [<ffffffff810d13aa>] lockdep_trace_alloc+0xa5/0xe9
[    1.900659]  [<ffffffff810cf5a0>] ? lock_release_holdtime+0x2f/0x199
[    1.917188]  [<ffffffff81167a3c>] kmem_cache_alloc_notrace+0x42/0x111
[    1.922320]  [<ffffffff8106fe8c>] ? reserve_memtype+0x152/0x518
[    1.938137]  [<ffffffff8106f8b1>] ? pat_pagerange_is_ram+0x4a/0x91
[    1.941730]  [<ffffffff8106fe8c>] reserve_memtype+0x152/0x518
[    1.958115]  [<ffffffff8106ce62>] __ioremap_caller+0x1dd/0x30f
[    1.975507]  [<ffffffff81ce2c5c>] ? acpi_os_map_memory+0x2a/0x47
[    1.978987]  [<ffffffff8106d0fd>] ioremap_nocache+0x2a/0x40
[    2.031400]  [<ffffffff810d0364>] ? trace_hardirqs_off+0x20/0x36
[    2.036096]  [<ffffffff81ce2c5c>] acpi_os_map_memory+0x2a/0x47
[    2.046263]  [<ffffffff815cd642>] acpi_tb_verify_table+0x3d/0x85
[    2.050349]  [<ffffffff81d34af7>] ? _spin_unlock_irqrestore+0x50/0x76
[    2.067327]  [<ffffffff815ccad6>] acpi_get_table_with_size+0x64/0xd9
[    2.070860]  [<ffffffff81d34af7>] ? _spin_unlock_irqrestore+0x50/0x76
[    2.088000]  [<ffffffff825c88d5>] dmar_table_detect+0x33/0x70
[    2.092047]  [<ffffffff825c8a01>] dmar_table_init+0x43/0x428
[    2.106854]  [<ffffffff825a7537>] enable_IR+0x1c/0x8d
[    2.110256]  [<ffffffff825a7624>] enable_IR_x2apic+0x7c/0x19e
[    2.127139]  [<ffffffff825a4876>] native_smp_prepare_cpus+0x139/0x3b8
[    2.145175]  [<ffffffff8259678d>] kernel_init+0x71/0x1da
[    2.148913]  [<ffffffff8104305a>] child_rip+0xa/0x20
[    2.152349]  [<ffffffff810429fc>] ? restore_args+0x0/0x30
[    2.167931]  [<ffffffff8259671c>] ? kernel_init+0x0/0x1da
[    2.171671]  [<ffffffff81043050>] ? child_rip+0x0/0x20
[    2.187607] ---[ end trace a7919e7f17c0a725 ]---

Venkatesh Pallipadi said:

| Looks like the problem started with this commit
|
| commit ce69a784504222c3ab6f1b3c357d09ec5772127a
| Author: Gleb Natapov <gleb@redhat.com>
| Date:   Mon Jul 20 15:24:17 2009 +0300
|
| x86/apic: Enable x2APIC without interrupt remapping under KVM
|
| Before this commit, dmar_table_init() was getting called
| with interrupts enabled and after this commit, it is getting
| called with interrupts disabled.

so try to move out dmar_table_init out of that function.

Analyzed-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "Pallipadi, Venkatesh" <venkatesh.pallipadi@intel.com>
LKML-Reference: <4A899F3C.2050104@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/apic/apic.c | 22 +++++++++++++---------
 1 file changed, 13 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index de039fcdd05..3fc3a6c428d 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -1365,14 +1365,6 @@ void enable_x2apic(void)
 int __init enable_IR(void)
 {
 #ifdef CONFIG_INTR_REMAP
-	int ret;
-
-	ret = dmar_table_init();
-	if (ret) {
-		pr_debug("dmar_table_init() failed with %d:\n", ret);
-		return 0;
-	}
-
 	if (!intr_remapping_supported()) {
 		pr_debug("intr-remapping not supported\n");
 		return 0;
@@ -1400,6 +1392,14 @@ void __init enable_IR_x2apic(void)
 	unsigned long flags;
 	struct IO_APIC_route_entry **ioapic_entries = NULL;
 	int ret, x2apic_enabled = 0;
+	int dmar_table_init_ret = 0;
+
+#ifdef CONFIG_INTR_REMAP
+	dmar_table_init_ret = dmar_table_init();
+	if (dmar_table_init_ret)
+		pr_debug("dmar_table_init() failed with %d:\n",
+				dmar_table_init_ret);
+#endif
 
 	ioapic_entries = alloc_ioapic_entries();
 	if (!ioapic_entries) {
@@ -1417,7 +1417,11 @@ void __init enable_IR_x2apic(void)
 	mask_8259A();
 	mask_IO_APIC_setup(ioapic_entries);
 
-	ret = enable_IR();
+	if (dmar_table_init_ret)
+		ret = 0;
+	else
+		ret = enable_IR();
+
 	if (!ret) {
 		/* IR is required if there is APIC ID > 255 even when running
 		 * under KVM
-- 
cgit v1.2.3


From 65cec8e3db606608fd1f8dfc4a1c7c37bfba9173 Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Mon, 17 Aug 2009 20:02:06 +0100
Subject: ARM: implement highpte

Add the ARM implementation of highpte, which allows PTE tables to be
placed in highmem.  Unfortunately, we do not offer highpte support
when support for L2 cache is enabled.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/Kconfig               |  5 +++++
 arch/arm/include/asm/pgalloc.h | 16 ++++++++++++----
 arch/arm/include/asm/pgtable.h | 17 +++++++++++++----
 arch/arm/mm/fault.c            |  1 +
 4 files changed, 31 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index aef63c8e3d2..370f4778712 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1054,6 +1054,11 @@ config HIGHMEM
 
 	  If unsure, say n.
 
+config HIGHPTE
+	bool "Allocate 2nd-level pagetables from highmem"
+	depends on HIGHMEM
+	depends on !OUTER_CACHE
+
 source "mm/Kconfig"
 
 config LEDS
diff --git a/arch/arm/include/asm/pgalloc.h b/arch/arm/include/asm/pgalloc.h
index 3dcd64bf182..b12cc98bbe0 100644
--- a/arch/arm/include/asm/pgalloc.h
+++ b/arch/arm/include/asm/pgalloc.h
@@ -36,6 +36,8 @@ extern void free_pgd_slow(struct mm_struct *mm, pgd_t *pgd);
 #define pgd_alloc(mm)			get_pgd_slow(mm)
 #define pgd_free(mm, pgd)		free_pgd_slow(mm, pgd)
 
+#define PGALLOC_GFP	(GFP_KERNEL | __GFP_NOTRACK | __GFP_REPEAT | __GFP_ZERO)
+
 /*
  * Allocate one PTE table.
  *
@@ -57,7 +59,7 @@ pte_alloc_one_kernel(struct mm_struct *mm, unsigned long addr)
 {
 	pte_t *pte;
 
-	pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO);
+	pte = (pte_t *)__get_free_page(PGALLOC_GFP);
 	if (pte) {
 		clean_dcache_area(pte, sizeof(pte_t) * PTRS_PER_PTE);
 		pte += PTRS_PER_PTE;
@@ -71,10 +73,16 @@ pte_alloc_one(struct mm_struct *mm, unsigned long addr)
 {
 	struct page *pte;
 
-	pte = alloc_pages(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO, 0);
+#ifdef CONFIG_HIGHPTE
+	pte = alloc_pages(PGALLOC_GFP | __GFP_HIGHMEM, 0);
+#else
+	pte = alloc_pages(PGALLOC_GFP, 0);
+#endif
 	if (pte) {
-		void *page = page_address(pte);
-		clean_dcache_area(page, sizeof(pte_t) * PTRS_PER_PTE);
+		if (!PageHighMem(pte)) {
+			void *page = page_address(pte);
+			clean_dcache_area(page, sizeof(pte_t) * PTRS_PER_PTE);
+		}
 		pgtable_page_ctor(pte);
 	}
 
diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
index 9655bce3d34..201ccaa11f6 100644
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -262,10 +262,19 @@ extern struct page *empty_zero_page;
 #define pte_clear(mm,addr,ptep)	set_pte_ext(ptep, __pte(0), 0)
 #define pte_page(pte)		(pfn_to_page(pte_pfn(pte)))
 #define pte_offset_kernel(dir,addr)	(pmd_page_vaddr(*(dir)) + __pte_index(addr))
-#define pte_offset_map(dir,addr)	(pmd_page_vaddr(*(dir)) + __pte_index(addr))
-#define pte_offset_map_nested(dir,addr)	(pmd_page_vaddr(*(dir)) + __pte_index(addr))
-#define pte_unmap(pte)		do { } while (0)
-#define pte_unmap_nested(pte)	do { } while (0)
+
+#define pte_offset_map(dir,addr)	(__pte_map(dir, KM_PTE0) + __pte_index(addr))
+#define pte_offset_map_nested(dir,addr)	(__pte_map(dir, KM_PTE1) + __pte_index(addr))
+#define pte_unmap(pte)			__pte_unmap(pte, KM_PTE0)
+#define pte_unmap_nested(pte)		__pte_unmap(pte, KM_PTE1)
+
+#ifndef CONFIG_HIGHPTE
+#define __pte_map(dir,km)	pmd_page_vaddr(*(dir))
+#define __pte_unmap(pte,km)	do { } while (0)
+#else
+#define __pte_map(dir,km)	((pte_t *)kmap_atomic(pmd_page(*(dir)), km) + PTRS_PER_PTE)
+#define __pte_unmap(pte,km)	kunmap_atomic((pte - PTRS_PER_PTE), km)
+#endif
 
 #define set_pte_ext(ptep,pte,ext) cpu_set_pte_ext(ptep,pte,ext)
 
diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index 6fdcbb70982..5fa8dea5a37 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -16,6 +16,7 @@
 #include <linux/kprobes.h>
 #include <linux/uaccess.h>
 #include <linux/page-flags.h>
+#include <linux/highmem.h>
 
 #include <asm/system.h>
 #include <asm/pgtable.h>
-- 
cgit v1.2.3


From 5213a780295895630530aebacdd19217a5379c9a Mon Sep 17 00:00:00 2001
From: Konrad Eisele <konrad@gaisler.com>
Date: Mon, 17 Aug 2009 00:13:29 +0000
Subject: sparc,leon: CONFIG_SPARC_LEON option and leon specific files.

The macro CONFIG_SPARC_LEON will shield, if undefined, the sun-sparc
code from LEON specific code. In
particular include/asm/leon.h will get empty through #ifdef and
leon_kernel.c and leon_mm.c will not be compiled.

Signed-off-by: Konrad Eisele <konrad@gaisler.com>
Reviewed-by:   Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/Kconfig                 |  11 ++
 arch/sparc/include/asm/leon.h      | 362 +++++++++++++++++++++++++++++++++++++
 arch/sparc/include/asm/leon_amba.h | 263 +++++++++++++++++++++++++++
 arch/sparc/kernel/leon_kernel.c    | 203 +++++++++++++++++++++
 arch/sparc/mm/leon_mm.c            | 260 ++++++++++++++++++++++++++
 5 files changed, 1099 insertions(+)
 create mode 100644 arch/sparc/include/asm/leon.h
 create mode 100644 arch/sparc/include/asm/leon_amba.h
 create mode 100644 arch/sparc/kernel/leon_kernel.c
 create mode 100644 arch/sparc/mm/leon_mm.c

(limited to 'arch')

diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 3f8b6a92eab..b847f880eec 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -437,6 +437,17 @@ config SERIAL_CONSOLE
 
 	  If unsure, say N.
 
+config SPARC_LEON
+	bool "Sparc Leon processor family"
+	depends on SPARC32
+	---help---
+	  If you say Y here if you are running on a SPARC-LEON processor.
+	  The LEON processor is a synthesizable VHDL model of the
+	  SPARC-v8 standard. LEON is  part of the GRLIB collection of
+	  IP cores that are distributed under GPL. GRLIB can be downloaded
+	  from www.gaisler.com. You can download a sparc-linux cross-compilation
+	  toolchain at www.gaisler.com.
+
 endmenu
 
 menu "Bus options (PCI etc.)"
diff --git a/arch/sparc/include/asm/leon.h b/arch/sparc/include/asm/leon.h
new file mode 100644
index 00000000000..28a42b73f64
--- /dev/null
+++ b/arch/sparc/include/asm/leon.h
@@ -0,0 +1,362 @@
+/*
+ * Copyright (C) 2004 Konrad Eisele (eiselekd@web.de,konrad@gaisler.com) Gaisler Research
+ * Copyright (C) 2004 Stefan Holst (mail@s-holst.de) Uni-Stuttgart
+ * Copyright (C) 2009 Daniel Hellstrom (daniel@gaisler.com) Aeroflex Gaisler AB
+ * Copyright (C) 2009 Konrad Eisele (konrad@gaisler.com) Aeroflex Gaisler AB
+ */
+
+#ifndef LEON_H_INCLUDE
+#define LEON_H_INCLUDE
+
+#ifdef CONFIG_SPARC_LEON
+
+#define ASI_LEON_NOCACHE	0x01
+
+#define ASI_LEON_DCACHE_MISS	0x1
+
+#define ASI_LEON_CACHEREGS	0x02
+#define ASI_LEON_IFLUSH		0x10
+#define ASI_LEON_DFLUSH		0x11
+
+#define ASI_LEON_MMUFLUSH	0x18
+#define ASI_LEON_MMUREGS	0x19
+#define ASI_LEON_BYPASS		0x1c
+#define ASI_LEON_FLUSH_PAGE	0x10
+
+/* mmu register access, ASI_LEON_MMUREGS */
+#define LEON_CNR_CTRL		0x000
+#define LEON_CNR_CTXP		0x100
+#define LEON_CNR_CTX		0x200
+#define LEON_CNR_F		0x300
+#define LEON_CNR_FADDR		0x400
+
+#define LEON_CNR_CTX_NCTX	256	/*number of MMU ctx */
+
+#define LEON_CNR_CTRL_TLBDIS	0x80000000
+
+#define LEON_MMUTLB_ENT_MAX	64
+
+/*
+ * diagnostic access from mmutlb.vhd:
+ * 0: pte address
+ * 4: pte
+ * 8: additional flags
+ */
+#define LEON_DIAGF_LVL		0x3
+#define LEON_DIAGF_WR		0x8
+#define LEON_DIAGF_WR_SHIFT	3
+#define LEON_DIAGF_HIT		0x10
+#define LEON_DIAGF_HIT_SHIFT	4
+#define LEON_DIAGF_CTX		0x1fe0
+#define LEON_DIAGF_CTX_SHIFT	5
+#define LEON_DIAGF_VALID	0x2000
+#define LEON_DIAGF_VALID_SHIFT	13
+
+/*
+ *  Interrupt Sources
+ *
+ *  The interrupt source numbers directly map to the trap type and to
+ *  the bits used in the Interrupt Clear, Interrupt Force, Interrupt Mask,
+ *  and the Interrupt Pending Registers.
+ */
+#define LEON_INTERRUPT_CORRECTABLE_MEMORY_ERROR	1
+#define LEON_INTERRUPT_UART_1_RX_TX		2
+#define LEON_INTERRUPT_UART_0_RX_TX		3
+#define LEON_INTERRUPT_EXTERNAL_0		4
+#define LEON_INTERRUPT_EXTERNAL_1		5
+#define LEON_INTERRUPT_EXTERNAL_2		6
+#define LEON_INTERRUPT_EXTERNAL_3		7
+#define LEON_INTERRUPT_TIMER1			8
+#define LEON_INTERRUPT_TIMER2			9
+#define LEON_INTERRUPT_EMPTY1			10
+#define LEON_INTERRUPT_EMPTY2			11
+#define LEON_INTERRUPT_OPEN_ETH			12
+#define LEON_INTERRUPT_EMPTY4			13
+#define LEON_INTERRUPT_EMPTY5			14
+#define LEON_INTERRUPT_EMPTY6			15
+
+/* irq masks */
+#define LEON_HARD_INT(x)	(1 << (x))	/* irq 0-15 */
+#define LEON_IRQMASK_R		0x0000fffe	/* bit 15- 1 of lregs.irqmask */
+#define LEON_IRQPRIO_R		0xfffe0000	/* bit 31-17 of lregs.irqmask */
+
+/* leon uart register definitions */
+#define LEON_OFF_UDATA	0x0
+#define LEON_OFF_USTAT	0x4
+#define LEON_OFF_UCTRL	0x8
+#define LEON_OFF_USCAL	0xc
+
+#define LEON_UCTRL_RE	0x01
+#define LEON_UCTRL_TE	0x02
+#define LEON_UCTRL_RI	0x04
+#define LEON_UCTRL_TI	0x08
+#define LEON_UCTRL_PS	0x10
+#define LEON_UCTRL_PE	0x20
+#define LEON_UCTRL_FL	0x40
+#define LEON_UCTRL_LB	0x80
+
+#define LEON_USTAT_DR	0x01
+#define LEON_USTAT_TS	0x02
+#define LEON_USTAT_TH	0x04
+#define LEON_USTAT_BR	0x08
+#define LEON_USTAT_OV	0x10
+#define LEON_USTAT_PE	0x20
+#define LEON_USTAT_FE	0x40
+
+#define LEON_MCFG2_SRAMDIS		0x00002000
+#define LEON_MCFG2_SDRAMEN		0x00004000
+#define LEON_MCFG2_SRAMBANKSZ		0x00001e00	/* [12-9] */
+#define LEON_MCFG2_SRAMBANKSZ_SHIFT	9
+#define LEON_MCFG2_SDRAMBANKSZ		0x03800000	/* [25-23] */
+#define LEON_MCFG2_SDRAMBANKSZ_SHIFT	23
+
+#define LEON_TCNT0_MASK	0x7fffff
+
+#define LEON_USTAT_ERROR (LEON_USTAT_OV | LEON_USTAT_PE | LEON_USTAT_FE)
+/* no break yet */
+
+#define ASI_LEON3_SYSCTRL		0x02
+#define ASI_LEON3_SYSCTRL_ICFG		0x08
+#define ASI_LEON3_SYSCTRL_DCFG		0x0c
+#define ASI_LEON3_SYSCTRL_CFG_SNOOPING (1 << 27)
+#define ASI_LEON3_SYSCTRL_CFG_SSIZE(c) (1 << ((c >> 20) & 0xf))
+
+#ifndef __ASSEMBLY__
+
+/* do a virtual address read without cache */
+static inline unsigned long leon_readnobuffer_reg(unsigned long paddr)
+{
+	unsigned long retval;
+	__asm__ __volatile__("lda [%1] %2, %0\n\t" :
+			     "=r"(retval) : "r"(paddr), "i"(ASI_LEON_NOCACHE));
+	return retval;
+}
+
+/* do a physical address bypass write, i.e. for 0x80000000 */
+static inline void leon_store_reg(unsigned long paddr, unsigned long value)
+{
+	__asm__ __volatile__("sta %0, [%1] %2\n\t" : : "r"(value), "r"(paddr),
+			     "i"(ASI_LEON_BYPASS) : "memory");
+}
+
+/* do a physical address bypass load, i.e. for 0x80000000 */
+static inline unsigned long leon_load_reg(unsigned long paddr)
+{
+	unsigned long retval;
+	__asm__ __volatile__("lda [%1] %2, %0\n\t" :
+			     "=r"(retval) : "r"(paddr), "i"(ASI_LEON_BYPASS));
+	return retval;
+}
+
+extern inline void leon_srmmu_disabletlb(void)
+{
+	unsigned int retval;
+	__asm__ __volatile__("lda [%%g0] %2, %0\n\t" : "=r"(retval) : "r"(0),
+			     "i"(ASI_LEON_MMUREGS));
+	retval |= LEON_CNR_CTRL_TLBDIS;
+	__asm__ __volatile__("sta %0, [%%g0] %2\n\t" : : "r"(retval), "r"(0),
+			     "i"(ASI_LEON_MMUREGS) : "memory");
+}
+
+extern inline void leon_srmmu_enabletlb(void)
+{
+	unsigned int retval;
+	__asm__ __volatile__("lda [%%g0] %2, %0\n\t" : "=r"(retval) : "r"(0),
+			     "i"(ASI_LEON_MMUREGS));
+	retval = retval & ~LEON_CNR_CTRL_TLBDIS;
+	__asm__ __volatile__("sta %0, [%%g0] %2\n\t" : : "r"(retval), "r"(0),
+			     "i"(ASI_LEON_MMUREGS) : "memory");
+}
+
+/* macro access for leon_load_reg() and leon_store_reg() */
+#define LEON3_BYPASS_LOAD_PA(x)	    (leon_load_reg((unsigned long)(x)))
+#define LEON3_BYPASS_STORE_PA(x, v) (leon_store_reg((unsigned long)(x), (unsigned long)(v)))
+#define LEON3_BYPASS_ANDIN_PA(x, v) LEON3_BYPASS_STORE_PA(x, LEON3_BYPASS_LOAD_PA(x) & v)
+#define LEON3_BYPASS_ORIN_PA(x, v)  LEON3_BYPASS_STORE_PA(x, LEON3_BYPASS_LOAD_PA(x) | v)
+#define LEON_BYPASS_LOAD_PA(x)      leon_load_reg((unsigned long)(x))
+#define LEON_BYPASS_STORE_PA(x, v)  leon_store_reg((unsigned long)(x), (unsigned long)(v))
+#define LEON_REGLOAD_PA(x)          leon_load_reg((unsigned long)(x)+LEON_PREGS)
+#define LEON_REGSTORE_PA(x, v)      leon_store_reg((unsigned long)(x)+LEON_PREGS, (unsigned long)(v))
+#define LEON_REGSTORE_OR_PA(x, v)   LEON_REGSTORE_PA(x, LEON_REGLOAD_PA(x) | (unsigned long)(v))
+#define LEON_REGSTORE_AND_PA(x, v)  LEON_REGSTORE_PA(x, LEON_REGLOAD_PA(x) & (unsigned long)(v))
+
+/* macro access for leon_readnobuffer_reg() */
+#define LEON_BYPASSCACHE_LOAD_VA(x) leon_readnobuffer_reg((unsigned long)(x))
+
+extern void sparc_leon_eirq_register(int eirq);
+extern void leon_init(void);
+extern void leon_switch_mm(void);
+extern void leon_init_IRQ(void);
+
+extern unsigned long last_valid_pfn;
+
+extern inline unsigned long sparc_leon3_get_dcachecfg(void)
+{
+	unsigned int retval;
+	__asm__ __volatile__("lda [%1] %2, %0\n\t" :
+			     "=r"(retval) :
+			     "r"(ASI_LEON3_SYSCTRL_DCFG),
+			     "i"(ASI_LEON3_SYSCTRL));
+	return retval;
+}
+
+/* enable snooping */
+extern inline void sparc_leon3_enable_snooping(void)
+{
+	__asm__ __volatile__ ("lda [%%g0] 2, %%l1\n\t"
+			  "set 0x800000, %%l2\n\t"
+			  "or  %%l2, %%l1, %%l2\n\t"
+			  "sta %%l2, [%%g0] 2\n\t" : : : "l1", "l2");
+};
+
+extern inline void sparc_leon3_disable_cache(void)
+{
+	__asm__ __volatile__ ("lda [%%g0] 2, %%l1\n\t"
+			  "set 0x00000f, %%l2\n\t"
+			  "andn  %%l2, %%l1, %%l2\n\t"
+			  "sta %%l2, [%%g0] 2\n\t" : : : "l1", "l2");
+};
+
+#endif /*!__ASSEMBLY__*/
+
+#ifdef CONFIG_SMP
+# define LEON3_IRQ_RESCHEDULE		13
+# define LEON3_IRQ_TICKER		(leon_percpu_timer_dev[0].irq)
+# define LEON3_IRQ_CROSS_CALL		15
+#endif
+
+#if defined(PAGE_SIZE_LEON_8K)
+#define LEON_PAGE_SIZE_LEON 1
+#elif defined(PAGE_SIZE_LEON_16K)
+#define LEON_PAGE_SIZE_LEON 2)
+#else
+#define LEON_PAGE_SIZE_LEON 0
+#endif
+
+#if LEON_PAGE_SIZE_LEON == 0
+/* [ 8, 6, 6 ] + 12 */
+#define LEON_PGD_SH    24
+#define LEON_PGD_M     0xff
+#define LEON_PMD_SH    18
+#define LEON_PMD_SH_V  (LEON_PGD_SH-2)
+#define LEON_PMD_M     0x3f
+#define LEON_PTE_SH    12
+#define LEON_PTE_M     0x3f
+#elif LEON_PAGE_SIZE_LEON == 1
+/* [ 7, 6, 6 ] + 13 */
+#define LEON_PGD_SH    25
+#define LEON_PGD_M     0x7f
+#define LEON_PMD_SH    19
+#define LEON_PMD_SH_V  (LEON_PGD_SH-1)
+#define LEON_PMD_M     0x3f
+#define LEON_PTE_SH    13
+#define LEON_PTE_M     0x3f
+#elif LEON_PAGE_SIZE_LEON == 2
+/* [ 6, 6, 6 ] + 14 */
+#define LEON_PGD_SH    26
+#define LEON_PGD_M     0x3f
+#define LEON_PMD_SH    20
+#define LEON_PMD_SH_V  (LEON_PGD_SH-0)
+#define LEON_PMD_M     0x3f
+#define LEON_PTE_SH    14
+#define LEON_PTE_M     0x3f
+#elif LEON_PAGE_SIZE_LEON == 3
+/* [ 4, 7, 6 ] + 15 */
+#define LEON_PGD_SH    28
+#define LEON_PGD_M     0x0f
+#define LEON_PMD_SH    21
+#define LEON_PMD_SH_V  (LEON_PGD_SH-0)
+#define LEON_PMD_M     0x7f
+#define LEON_PTE_SH    15
+#define LEON_PTE_M     0x3f
+#else
+#error cannot determine LEON_PAGE_SIZE_LEON
+#endif
+
+#define PAGE_MIN_SHIFT   (12)
+#define PAGE_MIN_SIZE    (1UL << PAGE_MIN_SHIFT)
+
+#define LEON3_XCCR_SETS_MASK  0x07000000UL
+#define LEON3_XCCR_SSIZE_MASK 0x00f00000UL
+
+#define LEON2_CCR_DSETS_MASK 0x03000000UL
+#define LEON2_CFG_SSIZE_MASK 0x00007000UL
+
+#ifndef __ASSEMBLY__
+extern unsigned long srmmu_swprobe(unsigned long vaddr, unsigned long *paddr);
+extern void leon_flush_icache_all(void);
+extern void leon_flush_dcache_all(void);
+extern void leon_flush_cache_all(void);
+extern void leon_flush_tlb_all(void);
+extern int leon_flush_during_switch;
+extern int leon_flush_needed(void);
+
+struct vm_area_struct;
+extern void leon_flush_icache_all(void);
+extern void leon_flush_dcache_all(void);
+extern void leon_flush_pcache_all(struct vm_area_struct *vma, unsigned long page);
+extern void leon_flush_cache_all(void);
+extern void leon_flush_tlb_all(void);
+extern int leon_flush_during_switch;
+extern int leon_flush_needed(void);
+extern void leon_flush_pcache_all(struct vm_area_struct *vma, unsigned long page);
+
+/* struct that hold LEON3 cache configuration registers */
+struct leon3_cacheregs {
+	unsigned long ccr;	/* 0x00 - Cache Control Register  */
+	unsigned long iccr;     /* 0x08 - Instruction Cache Configuration Register */
+	unsigned long dccr;	/* 0x0c - Data Cache Configuration Register */
+};
+
+/* struct that hold LEON2 cache configuration register
+ * & configuration register
+ */
+struct leon2_cacheregs {
+	unsigned long ccr, cfg;
+};
+
+#ifdef __KERNEL__
+
+#include <linux/interrupt.h>
+
+struct device_node;
+extern int sparc_leon_eirq_get(int eirq, int cpu);
+extern irqreturn_t sparc_leon_eirq_isr(int dummy, void *dev_id);
+extern void sparc_leon_eirq_register(int eirq);
+extern void leon_clear_clock_irq(void);
+extern void leon_load_profile_irq(int cpu, unsigned int limit);
+extern void leon_init_timers(irq_handler_t counter_fn);
+extern void leon_clear_clock_irq(void);
+extern void leon_load_profile_irq(int cpu, unsigned int limit);
+extern void leon_trans_init(struct device_node *dp);
+extern void leon_node_init(struct device_node *dp, struct device_node ***nextp);
+extern void leon_init_IRQ(void);
+extern void leon_init(void);
+extern unsigned long srmmu_swprobe(unsigned long vaddr, unsigned long *paddr);
+extern void init_leon(void);
+extern void poke_leonsparc(void);
+extern void leon3_getCacheRegs(struct leon3_cacheregs *regs);
+extern int leon_flush_needed(void);
+extern void leon_switch_mm(void);
+extern int srmmu_swprobe_trace;
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASSEMBLY__ */
+
+/* macros used in leon_mm.c */
+#define PFN(x)           ((x) >> PAGE_SHIFT)
+#define _pfn_valid(pfn)	 ((pfn < last_valid_pfn) && (pfn >= PFN(phys_base)))
+#define _SRMMU_PTE_PMASK_LEON 0xffffffff
+
+#else /* defined(CONFIG_SPARC_LEON) */
+
+/* nop definitions for !LEON case */
+#define leon_init() do {} while (0)
+#define leon_switch_mm() do {} while (0)
+#define leon_init_IRQ() do {} while (0)
+#define init_leon() do {} while (0)
+
+#endif /* !defined(CONFIG_SPARC_LEON) */
+
+#endif
diff --git a/arch/sparc/include/asm/leon_amba.h b/arch/sparc/include/asm/leon_amba.h
new file mode 100644
index 00000000000..618e8882179
--- /dev/null
+++ b/arch/sparc/include/asm/leon_amba.h
@@ -0,0 +1,263 @@
+/*
+*Copyright (C) 2004 Konrad Eisele (eiselekd@web.de,konrad@gaisler.com), Gaisler Research
+*Copyright (C) 2004 Stefan Holst (mail@s-holst.de), Uni-Stuttgart
+*Copyright (C) 2009 Daniel Hellstrom (daniel@gaisler.com),Konrad Eisele (konrad@gaisler.com) Aeroflex Gaisler AB
+*/
+
+#ifndef LEON_AMBA_H_INCLUDE
+#define LEON_AMBA_H_INCLUDE
+
+#ifndef __ASSEMBLY__
+
+struct amba_prom_registers {
+	unsigned int phys_addr;	/* The physical address of this register */
+	unsigned int reg_size;	/* How many bytes does this register take up? */
+};
+
+#endif
+
+/*
+ *  The following defines the bits in the LEON UART Status Registers.
+ */
+
+#define LEON_REG_UART_STATUS_DR   0x00000001	/* Data Ready */
+#define LEON_REG_UART_STATUS_TSE  0x00000002	/* TX Send Register Empty */
+#define LEON_REG_UART_STATUS_THE  0x00000004	/* TX Hold Register Empty */
+#define LEON_REG_UART_STATUS_BR   0x00000008	/* Break Error */
+#define LEON_REG_UART_STATUS_OE   0x00000010	/* RX Overrun Error */
+#define LEON_REG_UART_STATUS_PE   0x00000020	/* RX Parity Error */
+#define LEON_REG_UART_STATUS_FE   0x00000040	/* RX Framing Error */
+#define LEON_REG_UART_STATUS_ERR  0x00000078	/* Error Mask */
+
+/*
+ *  The following defines the bits in the LEON UART Ctrl Registers.
+ */
+
+#define LEON_REG_UART_CTRL_RE     0x00000001	/* Receiver enable */
+#define LEON_REG_UART_CTRL_TE     0x00000002	/* Transmitter enable */
+#define LEON_REG_UART_CTRL_RI     0x00000004	/* Receiver interrupt enable */
+#define LEON_REG_UART_CTRL_TI     0x00000008	/* Transmitter irq */
+#define LEON_REG_UART_CTRL_PS     0x00000010	/* Parity select */
+#define LEON_REG_UART_CTRL_PE     0x00000020	/* Parity enable */
+#define LEON_REG_UART_CTRL_FL     0x00000040	/* Flow control enable */
+#define LEON_REG_UART_CTRL_LB     0x00000080	/* Loop Back enable */
+
+#define LEON3_GPTIMER_EN 1
+#define LEON3_GPTIMER_RL 2
+#define LEON3_GPTIMER_LD 4
+#define LEON3_GPTIMER_IRQEN 8
+#define LEON3_GPTIMER_SEPIRQ 8
+
+#define LEON23_REG_TIMER_CONTROL_EN    0x00000001 /* 1 = enable counting */
+/* 0 = hold scalar and counter */
+#define LEON23_REG_TIMER_CONTROL_RL    0x00000002 /* 1 = reload at 0 */
+						  /* 0 = stop at 0 */
+#define LEON23_REG_TIMER_CONTROL_LD    0x00000004 /* 1 = load counter */
+						  /* 0 = no function */
+#define LEON23_REG_TIMER_CONTROL_IQ    0x00000008 /* 1 = irq enable */
+						  /* 0 = no function */
+
+/*
+ *  The following defines the bits in the LEON PS/2 Status Registers.
+ */
+
+#define LEON_REG_PS2_STATUS_DR   0x00000001	/* Data Ready */
+#define LEON_REG_PS2_STATUS_PE   0x00000002	/* Parity error */
+#define LEON_REG_PS2_STATUS_FE   0x00000004	/* Framing error */
+#define LEON_REG_PS2_STATUS_KI   0x00000008	/* Keyboard inhibit */
+#define LEON_REG_PS2_STATUS_RF   0x00000010	/* RX buffer full */
+#define LEON_REG_PS2_STATUS_TF   0x00000020	/* TX buffer full */
+
+/*
+ *  The following defines the bits in the LEON PS/2 Ctrl Registers.
+ */
+
+#define LEON_REG_PS2_CTRL_RE 0x00000001	/* Receiver enable */
+#define LEON_REG_PS2_CTRL_TE 0x00000002	/* Transmitter enable */
+#define LEON_REG_PS2_CTRL_RI 0x00000004	/* Keyboard receive irq  */
+#define LEON_REG_PS2_CTRL_TI 0x00000008	/* Keyboard transmit irq */
+
+#define LEON3_IRQMPSTATUS_CPUNR     28
+#define LEON3_IRQMPSTATUS_BROADCAST 27
+
+#define GPTIMER_CONFIG_IRQNT(a)          (((a) >> 3) & 0x1f)
+#define GPTIMER_CONFIG_ISSEP(a)          ((a) & (1 << 8))
+#define GPTIMER_CONFIG_NTIMERS(a)        ((a) & (0x7))
+#define LEON3_GPTIMER_CTRL_PENDING       0x10
+#define LEON3_GPTIMER_CONFIG_NRTIMERS(c) ((c)->config & 0x7)
+#define LEON3_GPTIMER_CTRL_ISPENDING(r)  (((r)&LEON3_GPTIMER_CTRL_PENDING) ? 1 : 0)
+
+#ifdef CONFIG_SPARC_LEON
+
+#ifndef __ASSEMBLY__
+
+struct leon3_irqctrl_regs_map {
+	u32 ilevel;
+	u32 ipend;
+	u32 iforce;
+	u32 iclear;
+	u32 mpstatus;
+	u32 mpbroadcast;
+	u32 notused02;
+	u32 notused03;
+	u32 notused10;
+	u32 notused11;
+	u32 notused12;
+	u32 notused13;
+	u32 notused20;
+	u32 notused21;
+	u32 notused22;
+	u32 notused23;
+	u32 mask[16];
+	u32 force[16];
+	/* Extended IRQ registers */
+	u32 intid[16];	/* 0xc0 */
+};
+
+struct leon3_apbuart_regs_map {
+	u32 data;
+	u32 status;
+	u32 ctrl;
+	u32 scaler;
+};
+
+struct leon3_gptimerelem_regs_map {
+	u32 val;
+	u32 rld;
+	u32 ctrl;
+	u32 unused;
+};
+
+struct leon3_gptimer_regs_map {
+	u32 scalar;
+	u32 scalar_reload;
+	u32 config;
+	u32 unused;
+	struct leon3_gptimerelem_regs_map e[8];
+};
+
+/*
+ *  Types and structure used for AMBA Plug & Play bus scanning
+ */
+
+#define AMBA_MAXAPB_DEVS 64
+#define AMBA_MAXAPB_DEVS_PERBUS 16
+
+struct amba_device_table {
+	int devnr;		   /* number of devices on AHB or APB bus */
+	unsigned int *addr[16];    /* addresses to the devices configuration tables */
+	unsigned int allocbits[1]; /* 0=unallocated, 1=allocated driver */
+};
+
+struct amba_apbslv_device_table {
+	int devnr;		                  /* number of devices on AHB or APB bus */
+	unsigned int *addr[AMBA_MAXAPB_DEVS];     /* addresses to the devices configuration tables */
+	unsigned int apbmst[AMBA_MAXAPB_DEVS];    /* apb master if a entry is a apb slave */
+	unsigned int apbmstidx[AMBA_MAXAPB_DEVS]; /* apb master idx if a entry is a apb slave */
+	unsigned int allocbits[4];                /* 0=unallocated, 1=allocated driver */
+};
+
+struct amba_confarea_type {
+	struct amba_confarea_type *next;/* next bus in chain */
+	struct amba_device_table ahbmst;
+	struct amba_device_table ahbslv;
+	struct amba_apbslv_device_table apbslv;
+	unsigned int apbmst;
+};
+
+/* collect apb slaves */
+struct amba_apb_device {
+	unsigned int start, irq, bus_id;
+	struct amba_confarea_type *bus;
+};
+
+/* collect ahb slaves */
+struct amba_ahb_device {
+	unsigned int start[4], irq, bus_id;
+	struct amba_confarea_type *bus;
+};
+
+struct device_node;
+void _amba_init(struct device_node *dp, struct device_node ***nextp);
+
+extern struct leon3_irqctrl_regs_map *leon3_irqctrl_regs;
+extern struct leon3_gptimer_regs_map *leon3_gptimer_regs;
+extern struct amba_apb_device leon_percpu_timer_dev[16];
+extern int leondebug_irq_disable;
+extern int leon_debug_irqout;
+extern unsigned long leon3_gptimer_irq;
+extern unsigned int sparc_leon_eirq;
+
+#endif /* __ASSEMBLY__ */
+
+#define LEON3_IO_AREA 0xfff00000
+#define LEON3_CONF_AREA 0xff000
+#define LEON3_AHB_SLAVE_CONF_AREA (1 << 11)
+
+#define LEON3_AHB_CONF_WORDS 8
+#define LEON3_APB_CONF_WORDS 2
+#define LEON3_AHB_MASTERS 16
+#define LEON3_AHB_SLAVES 16
+#define LEON3_APB_SLAVES 16
+#define LEON3_APBUARTS 8
+
+/* Vendor codes */
+#define VENDOR_GAISLER   1
+#define VENDOR_PENDER    2
+#define VENDOR_ESA       4
+#define VENDOR_OPENCORES 8
+
+/* Gaisler Research device id's */
+#define GAISLER_LEON3    0x003
+#define GAISLER_LEON3DSU 0x004
+#define GAISLER_ETHAHB   0x005
+#define GAISLER_APBMST   0x006
+#define GAISLER_AHBUART  0x007
+#define GAISLER_SRCTRL   0x008
+#define GAISLER_SDCTRL   0x009
+#define GAISLER_APBUART  0x00C
+#define GAISLER_IRQMP    0x00D
+#define GAISLER_AHBRAM   0x00E
+#define GAISLER_GPTIMER  0x011
+#define GAISLER_PCITRG   0x012
+#define GAISLER_PCISBRG  0x013
+#define GAISLER_PCIFBRG  0x014
+#define GAISLER_PCITRACE 0x015
+#define GAISLER_PCIDMA   0x016
+#define GAISLER_AHBTRACE 0x017
+#define GAISLER_ETHDSU   0x018
+#define GAISLER_PIOPORT  0x01A
+#define GAISLER_GRGPIO   0x01A
+#define GAISLER_AHBJTAG  0x01c
+#define GAISLER_ETHMAC   0x01D
+#define GAISLER_AHB2AHB  0x020
+#define GAISLER_USBDC    0x021
+#define GAISLER_ATACTRL  0x024
+#define GAISLER_DDRSPA   0x025
+#define GAISLER_USBEHC   0x026
+#define GAISLER_USBUHC   0x027
+#define GAISLER_I2CMST   0x028
+#define GAISLER_SPICTRL  0x02D
+#define GAISLER_DDR2SPA  0x02E
+#define GAISLER_SPIMCTRL 0x045
+#define GAISLER_LEON4    0x048
+#define GAISLER_LEON4DSU 0x049
+#define GAISLER_AHBSTAT  0x052
+#define GAISLER_FTMCTRL  0x054
+#define GAISLER_KBD      0x060
+#define GAISLER_VGA      0x061
+#define GAISLER_SVGA     0x063
+#define GAISLER_GRSYSMON 0x066
+#define GAISLER_GRACECTRL 0x067
+
+#define GAISLER_L2TIME   0xffd	/* internal device: leon2 timer */
+#define GAISLER_L2C      0xffe	/* internal device: leon2compat */
+#define GAISLER_PLUGPLAY 0xfff	/* internal device: plug & play configarea */
+
+#define amba_vendor(x) (((x) >> 24) & 0xff)
+
+#define amba_device(x) (((x) >> 12) & 0xfff)
+
+#endif /* !defined(CONFIG_SPARC_LEON) */
+
+#endif
diff --git a/arch/sparc/kernel/leon_kernel.c b/arch/sparc/kernel/leon_kernel.c
new file mode 100644
index 00000000000..54d8a5bd482
--- /dev/null
+++ b/arch/sparc/kernel/leon_kernel.c
@@ -0,0 +1,203 @@
+/*
+ * Copyright (C) 2009 Daniel Hellstrom (daniel@gaisler.com) Aeroflex Gaisler AB
+ * Copyright (C) 2009 Konrad Eisele (konrad@gaisler.com) Aeroflex Gaisler AB
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/mutex.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/interrupt.h>
+#include <linux/of_device.h>
+#include <asm/oplib.h>
+#include <asm/timer.h>
+#include <asm/prom.h>
+#include <asm/leon.h>
+#include <asm/leon_amba.h>
+
+#include "prom.h"
+#include "irq.h"
+
+struct leon3_irqctrl_regs_map *leon3_irqctrl_regs; /* interrupt controller base address, initialized by amba_init() */
+struct leon3_gptimer_regs_map *leon3_gptimer_regs; /* timer controller base address, initialized by amba_init() */
+struct amba_apb_device leon_percpu_timer_dev[16];
+
+int leondebug_irq_disable;
+int leon_debug_irqout;
+static int dummy_master_l10_counter;
+
+unsigned long leon3_gptimer_irq; /* interrupt controller irq number, initialized by amba_init() */
+unsigned int sparc_leon_eirq;
+#define LEON_IMASK ((&leon3_irqctrl_regs->mask[0]))
+
+/* Return the IRQ of the pending IRQ on the extended IRQ controller */
+int sparc_leon_eirq_get(int eirq, int cpu)
+{
+	return LEON3_BYPASS_LOAD_PA(&leon3_irqctrl_regs->intid[cpu]) & 0x1f;
+}
+
+irqreturn_t sparc_leon_eirq_isr(int dummy, void *dev_id)
+{
+	printk(KERN_ERR "sparc_leon_eirq_isr: ERROR EXTENDED IRQ\n");
+	return IRQ_HANDLED;
+}
+
+/* The extended IRQ controller has been found, this function registers it */
+void sparc_leon_eirq_register(int eirq)
+{
+	int irq;
+
+	/* Register a "BAD" handler for this interrupt, it should never happen */
+	irq = request_irq(eirq, sparc_leon_eirq_isr,
+			  (IRQF_DISABLED | SA_STATIC_ALLOC), "extirq", NULL);
+
+	if (irq) {
+		printk(KERN_ERR
+		       "sparc_leon_eirq_register: unable to attach IRQ%d\n",
+		       eirq);
+	} else {
+		sparc_leon_eirq = eirq;
+	}
+
+}
+
+static inline unsigned long get_irqmask(unsigned int irq)
+{
+	unsigned long mask;
+
+	if (!irq || ((irq > 0xf) && !sparc_leon_eirq)
+	    || ((irq > 0x1f) && sparc_leon_eirq)) {
+		printk(KERN_ERR
+		       "leon_get_irqmask: false irq number: %d\n", irq);
+		mask = 0;
+	} else {
+		mask = LEON_HARD_INT(irq);
+	}
+	return mask;
+}
+
+static void leon_enable_irq(unsigned int irq_nr)
+{
+	unsigned long mask, flags;
+	mask = get_irqmask(irq_nr);
+	local_irq_save(flags);
+	LEON3_BYPASS_STORE_PA(LEON_IMASK,
+			      (LEON3_BYPASS_LOAD_PA(LEON_IMASK) | (mask)));
+	local_irq_restore(flags);
+}
+
+static void leon_disable_irq(unsigned int irq_nr)
+{
+	unsigned long mask, flags;
+	mask = get_irqmask(irq_nr);
+	local_irq_save(flags);
+	LEON3_BYPASS_STORE_PA(LEON_IMASK,
+			      (LEON3_BYPASS_LOAD_PA(LEON_IMASK) & ~(mask)));
+	local_irq_restore(flags);
+
+}
+
+void __init leon_init_timers(irq_handler_t counter_fn)
+{
+	int irq;
+
+	leondebug_irq_disable = 0;
+	leon_debug_irqout = 0;
+	master_l10_counter = (unsigned int *)&dummy_master_l10_counter;
+	dummy_master_l10_counter = 0;
+
+	if (leon3_gptimer_regs && leon3_irqctrl_regs) {
+		LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[0].val, 0);
+		LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[0].rld,
+				      (((1000000 / 100) - 1)));
+		LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[0].ctrl, 0);
+
+	} else {
+		printk(KERN_ERR "No Timer/irqctrl found\n");
+		BUG();
+	}
+
+	irq = request_irq(leon3_gptimer_irq,
+			  counter_fn,
+			  (IRQF_DISABLED | SA_STATIC_ALLOC), "timer", NULL);
+
+	if (irq) {
+		printk(KERN_ERR "leon_time_init: unable to attach IRQ%d\n",
+		       LEON_INTERRUPT_TIMER1);
+		prom_halt();
+	}
+
+	if (leon3_gptimer_regs) {
+		LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[0].ctrl,
+				      LEON3_GPTIMER_EN |
+				      LEON3_GPTIMER_RL |
+				      LEON3_GPTIMER_LD | LEON3_GPTIMER_IRQEN);
+	}
+}
+
+void leon_clear_clock_irq(void)
+{
+}
+
+void leon_load_profile_irq(int cpu, unsigned int limit)
+{
+	BUG();
+}
+
+
+
+
+void __init leon_trans_init(struct device_node *dp)
+{
+	if (strcmp(dp->type, "cpu") == 0 && strcmp(dp->name, "<NULL>") == 0) {
+		struct property *p;
+		p = of_find_property(dp, "mid", (void *)0);
+		if (p) {
+			int mid;
+			dp->name = prom_early_alloc(5 + 1);
+			memcpy(&mid, p->value, p->length);
+			sprintf((char *)dp->name, "cpu%.2d", mid);
+		}
+	}
+}
+
+void __initdata (*prom_amba_init)(struct device_node *dp, struct device_node ***nextp) = 0;
+
+void __init leon_node_init(struct device_node *dp, struct device_node ***nextp)
+{
+	if (prom_amba_init &&
+	    strcmp(dp->type, "ambapp") == 0 &&
+	    strcmp(dp->name, "ambapp0") == 0) {
+		prom_amba_init(dp, nextp);
+	}
+}
+
+void __init leon_init_IRQ(void)
+{
+	sparc_init_timers = leon_init_timers;
+
+	BTFIXUPSET_CALL(enable_irq, leon_enable_irq, BTFIXUPCALL_NORM);
+	BTFIXUPSET_CALL(disable_irq, leon_disable_irq, BTFIXUPCALL_NORM);
+	BTFIXUPSET_CALL(enable_pil_irq, leon_enable_irq, BTFIXUPCALL_NORM);
+	BTFIXUPSET_CALL(disable_pil_irq, leon_disable_irq, BTFIXUPCALL_NORM);
+
+	BTFIXUPSET_CALL(clear_clock_irq, leon_clear_clock_irq,
+			BTFIXUPCALL_NORM);
+	BTFIXUPSET_CALL(load_profile_irq, leon_load_profile_irq,
+			BTFIXUPCALL_NOP);
+
+#ifdef CONFIG_SMP
+	BTFIXUPSET_CALL(set_cpu_int, leon_set_cpu_int, BTFIXUPCALL_NORM);
+	BTFIXUPSET_CALL(clear_cpu_int, leon_clear_ipi, BTFIXUPCALL_NORM);
+	BTFIXUPSET_CALL(set_irq_udt, leon_set_udt, BTFIXUPCALL_NORM);
+#endif
+
+}
+
+void __init leon_init(void)
+{
+	prom_build_more = &leon_node_init;
+}
diff --git a/arch/sparc/mm/leon_mm.c b/arch/sparc/mm/leon_mm.c
new file mode 100644
index 00000000000..c0e01297e64
--- /dev/null
+++ b/arch/sparc/mm/leon_mm.c
@@ -0,0 +1,260 @@
+/*
+ *  linux/arch/sparc/mm/leon_m.c
+ *
+ * Copyright (C) 2004 Konrad Eisele (eiselekd@web.de, konrad@gaisler.com) Gaisler Research
+ * Copyright (C) 2009 Daniel Hellstrom (daniel@gaisler.com) Aeroflex Gaisler AB
+ * Copyright (C) 2009 Konrad Eisele (konrad@gaisler.com) Aeroflex Gaisler AB
+ *
+ * do srmmu probe in software
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <asm/asi.h>
+#include <asm/leon.h>
+#include <asm/tlbflush.h>
+
+int leon_flush_during_switch = 1;
+int srmmu_swprobe_trace;
+
+unsigned long srmmu_swprobe(unsigned long vaddr, unsigned long *paddr)
+{
+
+	unsigned int ctxtbl;
+	unsigned int pgd, pmd, ped;
+	unsigned int ptr;
+	unsigned int lvl, pte, paddrbase;
+	unsigned int ctx;
+	unsigned int paddr_calc;
+
+	paddrbase = 0;
+
+	if (srmmu_swprobe_trace)
+		printk(KERN_INFO "swprobe: trace on\n");
+
+	ctxtbl = srmmu_get_ctable_ptr();
+	if (!(ctxtbl)) {
+		if (srmmu_swprobe_trace)
+			printk(KERN_INFO "swprobe: srmmu_get_ctable_ptr returned 0=>0\n");
+		return 0;
+	}
+	if (!_pfn_valid(PFN(ctxtbl))) {
+		if (srmmu_swprobe_trace)
+			printk(KERN_INFO
+			       "swprobe: !_pfn_valid(%x)=>0\n",
+			       PFN(ctxtbl));
+		return 0;
+	}
+
+	ctx = srmmu_get_context();
+	if (srmmu_swprobe_trace)
+		printk(KERN_INFO "swprobe:  --- ctx (%x) ---\n", ctx);
+
+	pgd = LEON_BYPASS_LOAD_PA(ctxtbl + (ctx * 4));
+
+	if (((pgd & SRMMU_ET_MASK) == SRMMU_ET_PTE)) {
+		if (srmmu_swprobe_trace)
+			printk(KERN_INFO "swprobe: pgd is entry level 3\n");
+		lvl = 3;
+		pte = pgd;
+		paddrbase = pgd & _SRMMU_PTE_PMASK_LEON;
+		goto ready;
+	}
+	if (((pgd & SRMMU_ET_MASK) != SRMMU_ET_PTD)) {
+		if (srmmu_swprobe_trace)
+			printk(KERN_INFO "swprobe: pgd is invalid => 0\n");
+		return 0;
+	}
+
+	if (srmmu_swprobe_trace)
+		printk(KERN_INFO "swprobe:  --- pgd (%x) ---\n", pgd);
+
+	ptr = (pgd & SRMMU_PTD_PMASK) << 4;
+	ptr += ((((vaddr) >> LEON_PGD_SH) & LEON_PGD_M) * 4);
+	if (!_pfn_valid(PFN(ptr)))
+		return 0;
+
+	pmd = LEON_BYPASS_LOAD_PA(ptr);
+	if (((pmd & SRMMU_ET_MASK) == SRMMU_ET_PTE)) {
+		if (srmmu_swprobe_trace)
+			printk(KERN_INFO "swprobe: pmd is entry level 2\n");
+		lvl = 2;
+		pte = pmd;
+		paddrbase = pmd & _SRMMU_PTE_PMASK_LEON;
+		goto ready;
+	}
+	if (((pmd & SRMMU_ET_MASK) != SRMMU_ET_PTD)) {
+		if (srmmu_swprobe_trace)
+			printk(KERN_INFO "swprobe: pmd is invalid => 0\n");
+		return 0;
+	}
+
+	if (srmmu_swprobe_trace)
+		printk(KERN_INFO "swprobe:  --- pmd (%x) ---\n", pmd);
+
+	ptr = (pmd & SRMMU_PTD_PMASK) << 4;
+	ptr += (((vaddr >> LEON_PMD_SH) & LEON_PMD_M) * 4);
+	if (!_pfn_valid(PFN(ptr))) {
+		if (srmmu_swprobe_trace)
+			printk(KERN_INFO "swprobe: !_pfn_valid(%x)=>0\n",
+			       PFN(ptr));
+		return 0;
+	}
+
+	ped = LEON_BYPASS_LOAD_PA(ptr);
+
+	if (((ped & SRMMU_ET_MASK) == SRMMU_ET_PTE)) {
+		if (srmmu_swprobe_trace)
+			printk(KERN_INFO "swprobe: ped is entry level 1\n");
+		lvl = 1;
+		pte = ped;
+		paddrbase = ped & _SRMMU_PTE_PMASK_LEON;
+		goto ready;
+	}
+	if (((ped & SRMMU_ET_MASK) != SRMMU_ET_PTD)) {
+		if (srmmu_swprobe_trace)
+			printk(KERN_INFO "swprobe: ped is invalid => 0\n");
+		return 0;
+	}
+
+	if (srmmu_swprobe_trace)
+		printk(KERN_INFO "swprobe:  --- ped (%x) ---\n", ped);
+
+	ptr = (ped & SRMMU_PTD_PMASK) << 4;
+	ptr += (((vaddr >> LEON_PTE_SH) & LEON_PTE_M) * 4);
+	if (!_pfn_valid(PFN(ptr)))
+		return 0;
+
+	ptr = LEON_BYPASS_LOAD_PA(ptr);
+	if (((ptr & SRMMU_ET_MASK) == SRMMU_ET_PTE)) {
+		if (srmmu_swprobe_trace)
+			printk(KERN_INFO "swprobe: ptr is entry level 0\n");
+		lvl = 0;
+		pte = ptr;
+		paddrbase = ptr & _SRMMU_PTE_PMASK_LEON;
+		goto ready;
+	}
+	if (srmmu_swprobe_trace)
+		printk(KERN_INFO "swprobe: ptr is invalid => 0\n");
+	return 0;
+
+ready:
+	switch (lvl) {
+	case 0:
+		paddr_calc =
+		    (vaddr & ~(-1 << LEON_PTE_SH)) | ((pte & ~0xff) << 4);
+		break;
+	case 1:
+		paddr_calc =
+		    (vaddr & ~(-1 << LEON_PMD_SH)) | ((pte & ~0xff) << 4);
+		break;
+	case 2:
+		paddr_calc =
+		    (vaddr & ~(-1 << LEON_PGD_SH)) | ((pte & ~0xff) << 4);
+		break;
+	default:
+	case 3:
+		paddr_calc = vaddr;
+		break;
+	}
+	if (srmmu_swprobe_trace)
+		printk(KERN_INFO "swprobe: padde %x\n", paddr_calc);
+	if (paddr)
+		*paddr = paddr_calc;
+	return paddrbase;
+}
+
+void leon_flush_icache_all(void)
+{
+	__asm__ __volatile__(" flush ");	/*iflush*/
+}
+
+void leon_flush_dcache_all(void)
+{
+	__asm__ __volatile__("sta %%g0, [%%g0] %0\n\t" : :
+			     "i"(ASI_LEON_DFLUSH) : "memory");
+}
+
+void leon_flush_pcache_all(struct vm_area_struct *vma, unsigned long page)
+{
+	if (vma->vm_flags & VM_EXEC)
+		leon_flush_icache_all();
+	leon_flush_dcache_all();
+}
+
+void leon_flush_cache_all(void)
+{
+	__asm__ __volatile__(" flush ");	/*iflush*/
+	__asm__ __volatile__("sta %%g0, [%%g0] %0\n\t" : :
+			     "i"(ASI_LEON_DFLUSH) : "memory");
+}
+
+void leon_flush_tlb_all(void)
+{
+	leon_flush_cache_all();
+	__asm__ __volatile__("sta %%g0, [%0] %1\n\t" : : "r"(0x400),
+			     "i"(ASI_LEON_MMUFLUSH) : "memory");
+}
+
+/* get all cache regs */
+void leon3_getCacheRegs(struct leon3_cacheregs *regs)
+{
+	unsigned long ccr, iccr, dccr;
+
+	if (!regs)
+		return;
+	/* Get Cache regs from "Cache ASI" address 0x0, 0x8 and 0xC */
+	__asm__ __volatile__("lda [%%g0] %3, %0\n\t"
+			     "mov 0x08, %%g1\n\t"
+			     "lda [%%g1] %3, %1\n\t"
+			     "mov 0x0c, %%g1\n\t"
+			     "lda [%%g1] %3, %2\n\t"
+			     : "=r"(ccr), "=r"(iccr), "=r"(dccr)
+			       /* output */
+			     : "i"(ASI_LEON_CACHEREGS)	/* input */
+			     : "g1"	/* clobber list */
+	    );
+	regs->ccr = ccr;
+	regs->iccr = iccr;
+	regs->dccr = dccr;
+}
+
+/* Due to virtual cache we need to check cache configuration if
+ * it is possible to skip flushing in some cases.
+ *
+ * Leon2 and Leon3 differ in their way of telling cache information
+ *
+ */
+int leon_flush_needed(void)
+{
+	int flush_needed = -1;
+	unsigned int ssize, sets;
+	char *setStr[4] =
+	    { "direct mapped", "2-way associative", "3-way associative",
+		"4-way associative"
+	};
+	/* leon 3 */
+	struct leon3_cacheregs cregs;
+	leon3_getCacheRegs(&cregs);
+	sets = (cregs.dccr & LEON3_XCCR_SETS_MASK) >> 24;
+	/* (ssize=>realsize) 0=>1k, 1=>2k, 2=>4k, 3=>8k ... */
+	ssize = 1 << ((cregs.dccr & LEON3_XCCR_SSIZE_MASK) >> 20);
+
+	printk(KERN_INFO "CACHE: %s cache, set size %dk\n",
+	       sets > 3 ? "unknown" : setStr[sets], ssize);
+	if ((ssize <= (PAGE_SIZE / 1024)) && (sets == 0)) {
+		/* Set Size <= Page size  ==>
+		   flush on every context switch not needed. */
+		flush_needed = 0;
+		printk(KERN_INFO "CACHE: not flushing on every context switch\n");
+	}
+	return flush_needed;
+}
+
+void leon_switch_mm(void)
+{
+	flush_tlb_mm((void *)0);
+	if (leon_flush_during_switch)
+		leon_flush_cache_all();
+}
-- 
cgit v1.2.3


From 97fb58fa9bb509b49090a1c62ed1b660d518c66b Mon Sep 17 00:00:00 2001
From: Konrad Eisele <konrad@gaisler.com>
Date: Mon, 17 Aug 2009 00:13:30 +0000
Subject: sparc,leon: Redefine MMU register access asi if CONFIG_LEON

SPARC-LEON has a different ASI for mmu register accesses.

Signed-off-by: Konrad Eisele <konrad@gaisler.com>
Reviewed-by:   Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/include/asm/asi.h | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'arch')

diff --git a/arch/sparc/include/asm/asi.h b/arch/sparc/include/asm/asi.h
index 74703c5ef98..b2e3db63a64 100644
--- a/arch/sparc/include/asm/asi.h
+++ b/arch/sparc/include/asm/asi.h
@@ -40,7 +40,11 @@
 #define ASI_M_UNA01         0x01   /* Same here... */
 #define ASI_M_MXCC          0x02   /* Access to TI VIKING MXCC registers */
 #define ASI_M_FLUSH_PROBE   0x03   /* Reference MMU Flush/Probe; rw, ss */
+#ifndef CONFIG_SPARC_LEON
 #define ASI_M_MMUREGS       0x04   /* MMU Registers; rw, ss */
+#else
+#define ASI_M_MMUREGS       0x19
+#endif /* CONFIG_SPARC_LEON */
 #define ASI_M_TLBDIAG       0x05   /* MMU TLB only Diagnostics */
 #define ASI_M_DIAGS         0x06   /* Reference MMU Diagnostics */
 #define ASI_M_IODIAG        0x07   /* MMU I/O TLB only Diagnostics */
-- 
cgit v1.2.3


From 0fd7ef1fe0e6e70c7851ce65a2eb8a8d3f49147e Mon Sep 17 00:00:00 2001
From: Konrad Eisele <konrad@gaisler.com>
Date: Mon, 17 Aug 2009 00:13:31 +0000
Subject: sparc,leon: Introduce the sparc-leon CPU type.

Add sparc_leon enum, M_LEON|M_LEON3_SOC machine. Add compilation of
leon.c in mm and kernel
if CONFIG_SPARC_LEON is defined. Add sparc_leon dependent
initialization to switch statements + head.S.

Signed-off-by: Konrad Eisele <konrad@gaisler.com>
Reviewed-by:   Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/include/asm/machines.h  | 6 +++++-
 arch/sparc/include/asm/pgtsrmmu.h  | 4 ++++
 arch/sparc/include/asm/prom.h      | 3 +++
 arch/sparc/include/asm/system_32.h | 1 +
 arch/sparc/kernel/Makefile         | 2 ++
 arch/sparc/kernel/cpu.c            | 5 +++++
 arch/sparc/kernel/head_32.S        | 5 +++++
 arch/sparc/kernel/idprom.c         | 2 ++
 arch/sparc/kernel/irq_32.c         | 5 +++++
 arch/sparc/kernel/setup_32.c       | 5 +++++
 arch/sparc/mm/Makefile             | 1 +
 arch/sparc/mm/init_32.c            | 4 ++++
 arch/sparc/mm/loadmmu.c            | 1 +
 13 files changed, 43 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/sparc/include/asm/machines.h b/arch/sparc/include/asm/machines.h
index c28c2f24879..cd9c099567e 100644
--- a/arch/sparc/include/asm/machines.h
+++ b/arch/sparc/include/asm/machines.h
@@ -15,7 +15,7 @@ struct Sun_Machine_Models {
 /* Current number of machines we know about that has an IDPROM
  * machtype entry including one entry for the 0x80 OBP machines.
  */
-#define NUM_SUN_MACHINES   15
+#define NUM_SUN_MACHINES   16
 
 /* The machine type in the idprom area looks like this:
  *
@@ -30,6 +30,7 @@ struct Sun_Machine_Models {
 
 #define SM_ARCH_MASK  0xf0
 #define SM_SUN4       0x20
+#define  M_LEON       0x30
 #define SM_SUN4C      0x50
 #define SM_SUN4M      0x70
 #define SM_SUN4M_OBP  0x80
@@ -41,6 +42,9 @@ struct Sun_Machine_Models {
 #define SM_4_330      0x03    /* Sun 4/300 series */
 #define SM_4_470      0x04    /* Sun 4/400 series */
 
+/* Leon machines */
+#define M_LEON3_SOC   0x02    /* Leon3 SoC */
+
 /* Sun4c machines                Full Name              - PROM NAME */
 #define SM_4C_SS1     0x01    /* Sun4c SparcStation 1   - Sun 4/60  */
 #define SM_4C_IPC     0x02    /* Sun4c SparcStation IPC - Sun 4/40  */
diff --git a/arch/sparc/include/asm/pgtsrmmu.h b/arch/sparc/include/asm/pgtsrmmu.h
index 808555fc1d5..1407c07bdad 100644
--- a/arch/sparc/include/asm/pgtsrmmu.h
+++ b/arch/sparc/include/asm/pgtsrmmu.h
@@ -267,6 +267,7 @@ static inline void srmmu_flush_tlb_page(unsigned long page)
 
 }
 
+#ifndef CONFIG_SPARC_LEON
 static inline unsigned long srmmu_hwprobe(unsigned long vaddr)
 {
 	unsigned long retval;
@@ -278,6 +279,9 @@ static inline unsigned long srmmu_hwprobe(unsigned long vaddr)
 
 	return retval;
 }
+#else
+#define srmmu_hwprobe(addr) (srmmu_swprobe(addr, 0) & SRMMU_PTE_PMASK)
+#endif
 
 static inline int
 srmmu_get_pte (unsigned long addr)
diff --git a/arch/sparc/include/asm/prom.h b/arch/sparc/include/asm/prom.h
index be8d7aaeb60..82a190d7efc 100644
--- a/arch/sparc/include/asm/prom.h
+++ b/arch/sparc/include/asm/prom.h
@@ -118,5 +118,8 @@ extern struct device_node *of_console_device;
 extern char *of_console_path;
 extern char *of_console_options;
 
+extern void (*prom_build_more)(struct device_node *dp, struct device_node ***nextp);
+extern char *build_full_name(struct device_node *dp);
+
 #endif /* __KERNEL__ */
 #endif /* _SPARC_PROM_H */
diff --git a/arch/sparc/include/asm/system_32.h b/arch/sparc/include/asm/system_32.h
index 751c8c17f5a..890036b3689 100644
--- a/arch/sparc/include/asm/system_32.h
+++ b/arch/sparc/include/asm/system_32.h
@@ -32,6 +32,7 @@ enum sparc_cpu {
   sun4u       = 0x05, /* V8 ploos ploos */
   sun_unknown = 0x06,
   ap1000      = 0x07, /* almost a sun4m */
+  sparc_leon  = 0x08, /* Leon SoC */
 };
 
 /* Really, userland should not be looking at any of this... */
diff --git a/arch/sparc/kernel/Makefile b/arch/sparc/kernel/Makefile
index 475ce4696ac..b0041756c9f 100644
--- a/arch/sparc/kernel/Makefile
+++ b/arch/sparc/kernel/Makefile
@@ -41,6 +41,8 @@ obj-y                   += of_device_common.o
 obj-y                   += of_device_$(BITS).o
 obj-$(CONFIG_SPARC64)   += prom_irqtrans.o
 
+obj-$(CONFIG_SPARC_LEON)+= leon_kernel.o
+
 obj-$(CONFIG_SPARC64)   += reboot.o
 obj-$(CONFIG_SPARC64)   += sysfs.o
 obj-$(CONFIG_SPARC64)   += iommu.o
diff --git a/arch/sparc/kernel/cpu.c b/arch/sparc/kernel/cpu.c
index d85c3dc4953..1446df90ef8 100644
--- a/arch/sparc/kernel/cpu.c
+++ b/arch/sparc/kernel/cpu.c
@@ -312,7 +312,12 @@ void __cpuinit cpu_probe(void)
 
 	psr = get_psr();
 	put_psr(psr | PSR_EF);
+#ifdef CONFIG_SPARC_LEON
+	fpu_vers = 7;
+#else
 	fpu_vers = ((get_fsr() >> 17) & 0x7);
+#endif
+
 	put_psr(psr);
 
 	set_cpu_and_fpu(psr_impl, psr_vers, fpu_vers);
diff --git a/arch/sparc/kernel/head_32.S b/arch/sparc/kernel/head_32.S
index 6b4d8acc4c8..439d82a95ac 100644
--- a/arch/sparc/kernel/head_32.S
+++ b/arch/sparc/kernel/head_32.S
@@ -809,6 +809,11 @@ found_version:
 		 nop
 
 got_prop:
+#ifdef CONFIG_SPARC_LEON
+	        /* no cpu-type check is needed, it is a SPARC-LEON */
+		ba sun4c_continue_boot
+		 nop
+#endif
 		set	cputypval, %o2
 		ldub	[%o2 + 0x4], %l1
 
diff --git a/arch/sparc/kernel/idprom.c b/arch/sparc/kernel/idprom.c
index 57922f69c3f..52a15fe2db1 100644
--- a/arch/sparc/kernel/idprom.c
+++ b/arch/sparc/kernel/idprom.c
@@ -31,6 +31,8 @@ static struct Sun_Machine_Models Sun_Machines[NUM_SUN_MACHINES] = {
 { .name = "Sun 4/200 Series",        .id_machtype = (SM_SUN4 | SM_4_260) },
 { .name = "Sun 4/300 Series",        .id_machtype = (SM_SUN4 | SM_4_330) },
 { .name = "Sun 4/400 Series",        .id_machtype = (SM_SUN4 | SM_4_470) },
+/* Now Leon */
+{ .name = "Leon3 System-on-a-Chip",  .id_machtype = (M_LEON | M_LEON3_SOC) },
 /* Now, Sun4c's */
 { .name = "Sun4c SparcStation 1",    .id_machtype = (SM_SUN4C | SM_4C_SS1) },
 { .name = "Sun4c SparcStation IPC",  .id_machtype = (SM_SUN4C | SM_4C_IPC) },
diff --git a/arch/sparc/kernel/irq_32.c b/arch/sparc/kernel/irq_32.c
index ad800b80c71..e1af4372832 100644
--- a/arch/sparc/kernel/irq_32.c
+++ b/arch/sparc/kernel/irq_32.c
@@ -45,6 +45,7 @@
 #include <asm/pcic.h>
 #include <asm/cacheflush.h>
 #include <asm/irq_regs.h>
+#include <asm/leon.h>
 
 #include "kernel.h"
 #include "irq.h"
@@ -661,6 +662,10 @@ void __init init_IRQ(void)
 		sun4d_init_IRQ();
 		break;
 
+	case sparc_leon:
+		leon_init_IRQ();
+		break;
+
 	default:
 		prom_printf("Cannot initialize IRQs on this Sun machine...");
 		break;
diff --git a/arch/sparc/kernel/setup_32.c b/arch/sparc/kernel/setup_32.c
index 998cadb4e7f..16a47ffe03c 100644
--- a/arch/sparc/kernel/setup_32.c
+++ b/arch/sparc/kernel/setup_32.c
@@ -235,6 +235,8 @@ void __init setup_arch(char **cmdline_p)
 		sparc_cpu_model = sun4e;
 	if (!strcmp(&cputypval,"sun4u"))
 		sparc_cpu_model = sun4u;
+	if (!strncmp(&cputypval, "leon" , 4))
+		sparc_cpu_model = sparc_leon;
 
 	printk("ARCH: ");
 	switch(sparc_cpu_model) {
@@ -256,6 +258,9 @@ void __init setup_arch(char **cmdline_p)
 	case sun4u:
 		printk("SUN4U\n");
 		break;
+	case sparc_leon:
+		printk("LEON\n");
+		break;
 	default:
 		printk("UNKNOWN!\n");
 		break;
diff --git a/arch/sparc/mm/Makefile b/arch/sparc/mm/Makefile
index 681abe0a459..79836a7dd00 100644
--- a/arch/sparc/mm/Makefile
+++ b/arch/sparc/mm/Makefile
@@ -11,6 +11,7 @@ obj-$(CONFIG_SPARC32)   += loadmmu.o
 obj-y                   += generic_$(BITS).o
 obj-$(CONFIG_SPARC32)   += extable.o btfixup.o srmmu.o iommu.o io-unit.o
 obj-$(CONFIG_SPARC32)   += hypersparc.o viking.o tsunami.o swift.o
+obj-$(CONFIG_SPARC_LEON)+= leon_mm.o
 
 # Only used by sparc64
 obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
diff --git a/arch/sparc/mm/init_32.c b/arch/sparc/mm/init_32.c
index 26bb3919ff1..54114ad0bde 100644
--- a/arch/sparc/mm/init_32.c
+++ b/arch/sparc/mm/init_32.c
@@ -34,6 +34,7 @@
 #include <asm/pgalloc.h>	/* bug in asm-generic/tlb.h: check_pgt_cache */
 #include <asm/tlb.h>
 #include <asm/prom.h>
+#include <asm/leon.h>
 
 DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
 
@@ -326,6 +327,9 @@ void __init paging_init(void)
 		sparc_unmapped_base = 0xe0000000;
 		BTFIXUPSET_SETHI(sparc_unmapped_base, 0xe0000000);
 		break;
+	case sparc_leon:
+		leon_init();
+		/* fall through */
 	case sun4m:
 	case sun4d:
 		srmmu_paging_init();
diff --git a/arch/sparc/mm/loadmmu.c b/arch/sparc/mm/loadmmu.c
index 652be05acbe..82ec8f66603 100644
--- a/arch/sparc/mm/loadmmu.c
+++ b/arch/sparc/mm/loadmmu.c
@@ -33,6 +33,7 @@ void __init load_mmu(void)
 		break;
 	case sun4m:
 	case sun4d:
+	case sparc_leon:
 		ld_mmu_srmmu();
 		break;
 	default:
-- 
cgit v1.2.3


From e63829de3d03f92cea2b26119e0aa9a7043b9913 Mon Sep 17 00:00:00 2001
From: Konrad Eisele <konrad@gaisler.com>
Date: Mon, 17 Aug 2009 00:13:32 +0000
Subject: sparc,leon: Added support for AMBAPP bus.

The device is a AMBA bus if it is a child of prom node "ambapp" (AMBA
plug and play). Two functions
leon_trans_init() and leon_node_init() (defined in
sparc/kernel/leon_kernel.c) are called in the
prom_build_tree() path if CONFIG_SPARC_LEON is
defined. leon_node_init() will build up the device
tree using AMBA plug and play. Also: a extra check was addes to
prom_common.c:build_one_prop()
in case a rom-node is undefined which can happen for SPARC-LEON
because it creates only a minimum
nodes to emulate sparc behaviour.

Signed-off-by: Konrad Eisele <konrad@gaisler.com>
Reviewed-by:   Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/kernel/of_device_32.c | 40 ++++++++++++++++++++++++++++++++++++++++
 arch/sparc/kernel/prom_32.c      | 33 +++++++++++++++++++++++++++++++++
 arch/sparc/kernel/prom_common.c  | 10 ++++++++--
 3 files changed, 81 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/sparc/kernel/of_device_32.c b/arch/sparc/kernel/of_device_32.c
index 90396702ea2..4c26eb59e74 100644
--- a/arch/sparc/kernel/of_device_32.c
+++ b/arch/sparc/kernel/of_device_32.c
@@ -9,6 +9,8 @@
 #include <linux/irq.h>
 #include <linux/of_device.h>
 #include <linux/of_platform.h>
+#include <asm/leon.h>
+#include <asm/leon_amba.h>
 
 #include "of_device_common.h"
 
@@ -97,6 +99,35 @@ static unsigned long of_bus_sbus_get_flags(const u32 *addr, unsigned long flags)
 	return IORESOURCE_MEM;
 }
 
+ /*
+ * AMBAPP bus specific translator
+ */
+
+static int of_bus_ambapp_match(struct device_node *np)
+{
+	return !strcmp(np->name, "ambapp");
+}
+
+static void of_bus_ambapp_count_cells(struct device_node *child,
+				      int *addrc, int *sizec)
+{
+	if (addrc)
+		*addrc = 1;
+	if (sizec)
+		*sizec = 1;
+}
+
+static int of_bus_ambapp_map(u32 *addr, const u32 *range,
+			     int na, int ns, int pna)
+{
+	return of_bus_default_map(addr, range, na, ns, pna);
+}
+
+static unsigned long of_bus_ambapp_get_flags(const u32 *addr,
+					     unsigned long flags)
+{
+	return IORESOURCE_MEM;
+}
 
 /*
  * Array of bus specific translators
@@ -121,6 +152,15 @@ static struct of_bus of_busses[] = {
 		.map = of_bus_default_map,
 		.get_flags = of_bus_sbus_get_flags,
 	},
+	/* AMBA */
+	{
+		.name = "ambapp",
+		.addr_prop_name = "reg",
+		.match = of_bus_ambapp_match,
+		.count_cells = of_bus_ambapp_count_cells,
+		.map = of_bus_ambapp_map,
+		.get_flags = of_bus_ambapp_get_flags,
+	},
 	/* Default */
 	{
 		.name = "default",
diff --git a/arch/sparc/kernel/prom_32.c b/arch/sparc/kernel/prom_32.c
index fe43e80772d..0a37e8cfd16 100644
--- a/arch/sparc/kernel/prom_32.c
+++ b/arch/sparc/kernel/prom_32.c
@@ -24,6 +24,8 @@
 
 #include <asm/prom.h>
 #include <asm/oplib.h>
+#include <asm/leon.h>
+#include <asm/leon_amba.h>
 
 #include "prom.h"
 
@@ -131,6 +133,35 @@ static void __init ebus_path_component(struct device_node *dp, char *tmp_buf)
 		regs->which_io, regs->phys_addr);
 }
 
+/* "name:vendor:device@irq,addrlo" */
+static void __init ambapp_path_component(struct device_node *dp, char *tmp_buf)
+{
+	struct amba_prom_registers *regs; unsigned int *intr;
+	unsigned int *device, *vendor;
+	struct property *prop;
+
+	prop = of_find_property(dp, "reg", NULL);
+	if (!prop)
+		return;
+	regs = prop->value;
+	prop = of_find_property(dp, "interrupts", NULL);
+	if (!prop)
+		return;
+	intr = prop->value;
+	prop = of_find_property(dp, "vendor", NULL);
+	if (!prop)
+		return;
+	vendor = prop->value;
+	prop = of_find_property(dp, "device", NULL);
+	if (!prop)
+		return;
+	device = prop->value;
+
+	sprintf(tmp_buf, "%s:%d:%d@%x,%x",
+		dp->name, *vendor, *device,
+		*intr, regs->phys_addr);
+}
+
 static void __init __build_path_component(struct device_node *dp, char *tmp_buf)
 {
 	struct device_node *parent = dp->parent;
@@ -143,6 +174,8 @@ static void __init __build_path_component(struct device_node *dp, char *tmp_buf)
 			return sbus_path_component(dp, tmp_buf);
 		if (!strcmp(parent->type, "ebus"))
 			return ebus_path_component(dp, tmp_buf);
+		if (!strcmp(parent->type, "ambapp"))
+			return ambapp_path_component(dp, tmp_buf);
 
 		/* "isa" is handled with platform naming */
 	}
diff --git a/arch/sparc/kernel/prom_common.c b/arch/sparc/kernel/prom_common.c
index 0fb5789d43c..138910c6720 100644
--- a/arch/sparc/kernel/prom_common.c
+++ b/arch/sparc/kernel/prom_common.c
@@ -22,9 +22,12 @@
 #include <linux/of.h>
 #include <asm/prom.h>
 #include <asm/oplib.h>
+#include <asm/leon.h>
 
 #include "prom.h"
 
+void (*prom_build_more)(struct device_node *dp, struct device_node ***nextp);
+
 struct device_node *of_console_device;
 EXPORT_SYMBOL(of_console_device);
 
@@ -161,7 +164,7 @@ static struct property * __init build_one_prop(phandle node, char *prev,
 			name = prom_nextprop(node, prev, p->name);
 		}
 
-		if (strlen(name) == 0) {
+		if (!name || strlen(name) == 0) {
 			tmp = p;
 			return NULL;
 		}
@@ -242,7 +245,7 @@ static struct device_node * __init prom_create_node(phandle node,
 	return dp;
 }
 
-static char * __init build_full_name(struct device_node *dp)
+char * __init build_full_name(struct device_node *dp)
 {
 	int len, ourlen, plen;
 	char *n;
@@ -289,6 +292,9 @@ static struct device_node * __init prom_build_tree(struct device_node *parent,
 
 		dp->child = prom_build_tree(dp, prom_getchild(node), nextp);
 
+		if (prom_build_more)
+			prom_build_more(dp, nextp);
+
 		node = prom_getsibling(node);
 	}
 
-- 
cgit v1.2.3


From 75d9e34698540e96b422293e1d76ab02cc7faefb Mon Sep 17 00:00:00 2001
From: Konrad Eisele <konrad@gaisler.com>
Date: Mon, 17 Aug 2009 00:13:33 +0000
Subject: sparc, leon: sparc-leon specific SRMMU initialization and bootup
 fixes.

The sparc-leon caches are virtually tagged so a flush is needed on ctx
switch.

Signed-off-by: Konrad Eisele <konrad@gaisler.com>
Reviewed-by:   Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/mm/srmmu.c | 53 ++++++++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 52 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/sparc/mm/srmmu.c b/arch/sparc/mm/srmmu.c
index ade4eb373bd..509b1ffeba6 100644
--- a/arch/sparc/mm/srmmu.c
+++ b/arch/sparc/mm/srmmu.c
@@ -46,6 +46,7 @@
 #include <asm/tsunami.h>
 #include <asm/swift.h>
 #include <asm/turbosparc.h>
+#include <asm/leon.h>
 
 #include <asm/btfixup.h>
 
@@ -569,6 +570,9 @@ static void srmmu_switch_mm(struct mm_struct *old_mm, struct mm_struct *mm,
 		srmmu_ctxd_set(&srmmu_context_table[mm->context], mm->pgd);
 	}
 
+	if (sparc_cpu_model == sparc_leon)
+		leon_switch_mm();
+
 	if (is_hypersparc)
 		hyper_flush_whole_icache();
 
@@ -1977,6 +1981,45 @@ static void __init init_viking(void)
 	poke_srmmu = poke_viking;
 }
 
+#ifdef CONFIG_SPARC_LEON
+
+void __init poke_leonsparc(void)
+{
+}
+
+void __init init_leon(void)
+{
+
+	srmmu_name = "Leon";
+
+	BTFIXUPSET_CALL(flush_cache_all, leon_flush_cache_all,
+			BTFIXUPCALL_NORM);
+	BTFIXUPSET_CALL(flush_cache_mm, leon_flush_cache_all,
+			BTFIXUPCALL_NORM);
+	BTFIXUPSET_CALL(flush_cache_page, leon_flush_pcache_all,
+			BTFIXUPCALL_NORM);
+	BTFIXUPSET_CALL(flush_cache_range, leon_flush_cache_all,
+			BTFIXUPCALL_NORM);
+	BTFIXUPSET_CALL(flush_page_for_dma, leon_flush_dcache_all,
+			BTFIXUPCALL_NORM);
+
+	BTFIXUPSET_CALL(flush_tlb_all, leon_flush_tlb_all, BTFIXUPCALL_NORM);
+	BTFIXUPSET_CALL(flush_tlb_mm, leon_flush_tlb_all, BTFIXUPCALL_NORM);
+	BTFIXUPSET_CALL(flush_tlb_page, leon_flush_tlb_all, BTFIXUPCALL_NORM);
+	BTFIXUPSET_CALL(flush_tlb_range, leon_flush_tlb_all, BTFIXUPCALL_NORM);
+
+	BTFIXUPSET_CALL(__flush_page_to_ram, leon_flush_cache_all,
+			BTFIXUPCALL_NOP);
+	BTFIXUPSET_CALL(flush_sig_insns, leon_flush_cache_all, BTFIXUPCALL_NOP);
+
+	poke_srmmu = poke_leonsparc;
+
+	srmmu_cache_pagetables = 0;
+
+	leon_flush_during_switch = leon_flush_needed();
+}
+#endif
+
 /* Probe for the srmmu chip version. */
 static void __init get_srmmu_type(void)
 {
@@ -1992,7 +2035,15 @@ static void __init get_srmmu_type(void)
 	psr_typ = (psr >> 28) & 0xf;
 	psr_vers = (psr >> 24) & 0xf;
 
-	/* First, check for HyperSparc or Cypress. */
+	/* First, check for sparc-leon. */
+	if (sparc_cpu_model == sparc_leon) {
+		psr_typ = 0xf;	/* hardcoded ids for older models/simulators */
+		psr_vers = 2;
+		init_leon();
+		return;
+	}
+
+	/* Second, check for HyperSparc or Cypress. */
 	if(mod_typ == 1) {
 		switch(mod_rev) {
 		case 7:
-- 
cgit v1.2.3


From 1660e9d3d04b6c636b7171bf6c08ac7b82a7de79 Mon Sep 17 00:00:00 2001
From: Paul Mackerras <paulus@samba.org>
Date: Mon, 17 Aug 2009 14:36:32 +1000
Subject: powerpc/32: Always order writes to halves of 64-bit PTEs

On 32-bit systems with 64-bit PTEs, the PTEs have to be written in two
32-bit halves.  On SMP we write the higher-order half and then the
lower-order half, with a write barrier between the two halves, but on
UP there was no particular ordering of the writes to the two halves.

This extends the ordering that we already do on SMP to the UP case as
well.  The reason is that with the perf_counter subsystem potentially
accessing user memory at interrupt time to get stack traces, we have
to be careful not to create an incorrect but apparently valid PTE even
on UP.

Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 arch/powerpc/include/asm/pgtable.h | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/pgtable.h b/arch/powerpc/include/asm/pgtable.h
index eb17da78112..2a5da069714 100644
--- a/arch/powerpc/include/asm/pgtable.h
+++ b/arch/powerpc/include/asm/pgtable.h
@@ -104,8 +104,8 @@ static inline void __set_pte_at(struct mm_struct *mm, unsigned long addr,
 	else
 		pte_update(ptep, ~_PAGE_HASHPTE, pte_val(pte));
 
-#elif defined(CONFIG_PPC32) && defined(CONFIG_PTE_64BIT) && defined(CONFIG_SMP)
-	/* Second case is 32-bit with 64-bit PTE in SMP mode. In this case, we
+#elif defined(CONFIG_PPC32) && defined(CONFIG_PTE_64BIT)
+	/* Second case is 32-bit with 64-bit PTE.  In this case, we
 	 * can just store as long as we do the two halves in the right order
 	 * with a barrier in between. This is possible because we take care,
 	 * in the hash code, to pre-invalidate if the PTE was already hashed,
@@ -140,7 +140,7 @@ static inline void __set_pte_at(struct mm_struct *mm, unsigned long addr,
 
 #else
 	/* Anything else just stores the PTE normally. That covers all 64-bit
-	 * cases, and 32-bit non-hash with 64-bit PTEs in UP mode
+	 * cases, and 32-bit non-hash with 32-bit PTEs.
 	 */
 	*ptep = pte;
 #endif
-- 
cgit v1.2.3


From 9c1e105238c474d19905af504f2e7f42d4f71f9e Mon Sep 17 00:00:00 2001
From: Paul Mackerras <paulus@samba.org>
Date: Mon, 17 Aug 2009 15:17:54 +1000
Subject: powerpc: Allow perf_counters to access user memory at interrupt time

This provides a mechanism to allow the perf_counters code to access
user memory in a PMU interrupt routine.  Such an access can cause
various kinds of interrupt: SLB miss, MMU hash table miss, segment
table miss, or TLB miss, depending on the processor.  This commit
only deals with 64-bit classic/server processors, which use an MMU
hash table.  32-bit processors are already able to access user memory
at interrupt time.  Since we don't soft-disable on 32-bit, we avoid
the possibility of reentering hash_page or the TLB miss handlers,
since they run with interrupts disabled.

On 64-bit processors, an SLB miss interrupt on a user address will
update the slb_cache and slb_cache_ptr fields in the paca.  This is
OK except in the case where a PMU interrupt occurs in switch_slb,
which also accesses those fields.  To prevent this, we hard-disable
interrupts in switch_slb.  Interrupts are already soft-disabled at
this point, and will get hard-enabled when they get soft-enabled
later.

This also reworks slb_flush_and_rebolt: to avoid hard-disabling twice,
and to make sure that it clears the slb_cache_ptr when called from
other callers than switch_slb, the existing routine is renamed to
__slb_flush_and_rebolt, which is called by switch_slb and the new
version of slb_flush_and_rebolt.

Similarly, switch_stab (used on POWER3 and RS64 processors) gets a
hard_irq_disable() to protect the per-cpu variables used there and
in ste_allocate.

If a MMU hashtable miss interrupt occurs, normally we would call
hash_page to look up the Linux PTE for the address and create a HPTE.
However, hash_page is fairly complex and takes some locks, so to
avoid the possibility of deadlock, we check the preemption count
to see if we are in a (pseudo-)NMI handler, and if so, we don't call
hash_page but instead treat it like a bad access that will get
reported up through the exception table mechanism.  An interrupt
whose handler runs even though the interrupt occurred when
soft-disabled (such as the PMU interrupt) is considered a pseudo-NMI
handler, which should use nmi_enter()/nmi_exit() rather than
irq_enter()/irq_exit().

Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 arch/powerpc/kernel/asm-offsets.c    |  2 ++
 arch/powerpc/kernel/exceptions-64s.S | 19 ++++++++++++++++++
 arch/powerpc/mm/slb.c                | 37 +++++++++++++++++++++++++-----------
 arch/powerpc/mm/stab.c               | 11 ++++++++++-
 4 files changed, 57 insertions(+), 12 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index 561b6465231..197b15646ee 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -67,6 +67,8 @@ int main(void)
 	DEFINE(MMCONTEXTID, offsetof(struct mm_struct, context.id));
 #ifdef CONFIG_PPC64
 	DEFINE(AUDITCONTEXT, offsetof(struct task_struct, audit_context));
+	DEFINE(SIGSEGV, SIGSEGV);
+	DEFINE(NMI_MASK, NMI_MASK);
 #else
 	DEFINE(THREAD_INFO, offsetof(struct task_struct, stack));
 #endif /* CONFIG_PPC64 */
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index eb898112e57..8ac85e08ffa 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -729,6 +729,11 @@ BEGIN_FTR_SECTION
 	bne-	do_ste_alloc		/* If so handle it */
 END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
 
+	clrrdi	r11,r1,THREAD_SHIFT
+	lwz	r0,TI_PREEMPT(r11)	/* If we're in an "NMI" */
+	andis.	r0,r0,NMI_MASK@h	/* (i.e. an irq when soft-disabled) */
+	bne	77f			/* then don't call hash_page now */
+
 	/*
 	 * On iSeries, we soft-disable interrupts here, then
 	 * hard-enable interrupts so that the hash_page code can spin on
@@ -833,6 +838,20 @@ handle_page_fault:
 	bl	.low_hash_fault
 	b	.ret_from_except
 
+/*
+ * We come here as a result of a DSI at a point where we don't want
+ * to call hash_page, such as when we are accessing memory (possibly
+ * user memory) inside a PMU interrupt that occurred while interrupts
+ * were soft-disabled.  We want to invoke the exception handler for
+ * the access, or panic if there isn't a handler.
+ */
+77:	bl	.save_nvgprs
+	mr	r4,r3
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	li	r5,SIGSEGV
+	bl	.bad_page_fault
+	b	.ret_from_except
+
 	/* here we have a segment miss */
 do_ste_alloc:
 	bl	.ste_allocate		/* try to insert stab entry */
diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c
index 5b7038f248b..a685652effe 100644
--- a/arch/powerpc/mm/slb.c
+++ b/arch/powerpc/mm/slb.c
@@ -92,15 +92,13 @@ static inline void create_shadowed_slbe(unsigned long ea, int ssize,
 		     : "memory" );
 }
 
-void slb_flush_and_rebolt(void)
+static void __slb_flush_and_rebolt(void)
 {
 	/* If you change this make sure you change SLB_NUM_BOLTED
 	 * appropriately too. */
 	unsigned long linear_llp, vmalloc_llp, lflags, vflags;
 	unsigned long ksp_esid_data, ksp_vsid_data;
 
-	WARN_ON(!irqs_disabled());
-
 	linear_llp = mmu_psize_defs[mmu_linear_psize].sllp;
 	vmalloc_llp = mmu_psize_defs[mmu_vmalloc_psize].sllp;
 	lflags = SLB_VSID_KERNEL | linear_llp;
@@ -117,12 +115,6 @@ void slb_flush_and_rebolt(void)
 		ksp_vsid_data = get_slb_shadow()->save_area[2].vsid;
 	}
 
-	/*
-	 * We can't take a PMU exception in the following code, so hard
-	 * disable interrupts.
-	 */
-	hard_irq_disable();
-
 	/* We need to do this all in asm, so we're sure we don't touch
 	 * the stack between the slbia and rebolting it. */
 	asm volatile("isync\n"
@@ -139,6 +131,21 @@ void slb_flush_and_rebolt(void)
 		     : "memory");
 }
 
+void slb_flush_and_rebolt(void)
+{
+
+	WARN_ON(!irqs_disabled());
+
+	/*
+	 * We can't take a PMU exception in the following code, so hard
+	 * disable interrupts.
+	 */
+	hard_irq_disable();
+
+	__slb_flush_and_rebolt();
+	get_paca()->slb_cache_ptr = 0;
+}
+
 void slb_vmalloc_update(void)
 {
 	unsigned long vflags;
@@ -180,12 +187,20 @@ static inline int esids_match(unsigned long addr1, unsigned long addr2)
 /* Flush all user entries from the segment table of the current processor. */
 void switch_slb(struct task_struct *tsk, struct mm_struct *mm)
 {
-	unsigned long offset = get_paca()->slb_cache_ptr;
+	unsigned long offset;
 	unsigned long slbie_data = 0;
 	unsigned long pc = KSTK_EIP(tsk);
 	unsigned long stack = KSTK_ESP(tsk);
 	unsigned long unmapped_base;
 
+	/*
+	 * We need interrupts hard-disabled here, not just soft-disabled,
+	 * so that a PMU interrupt can't occur, which might try to access
+	 * user memory (to get a stack trace) and possible cause an SLB miss
+	 * which would update the slb_cache/slb_cache_ptr fields in the PACA.
+	 */
+	hard_irq_disable();
+	offset = get_paca()->slb_cache_ptr;
 	if (!cpu_has_feature(CPU_FTR_NO_SLBIE_B) &&
 	    offset <= SLB_CACHE_ENTRIES) {
 		int i;
@@ -200,7 +215,7 @@ void switch_slb(struct task_struct *tsk, struct mm_struct *mm)
 		}
 		asm volatile("isync" : : : "memory");
 	} else {
-		slb_flush_and_rebolt();
+		__slb_flush_and_rebolt();
 	}
 
 	/* Workaround POWER5 < DD2.1 issue */
diff --git a/arch/powerpc/mm/stab.c b/arch/powerpc/mm/stab.c
index 98cd1dc2ae7..ab5fb48b3e9 100644
--- a/arch/powerpc/mm/stab.c
+++ b/arch/powerpc/mm/stab.c
@@ -164,7 +164,7 @@ void switch_stab(struct task_struct *tsk, struct mm_struct *mm)
 {
 	struct stab_entry *stab = (struct stab_entry *) get_paca()->stab_addr;
 	struct stab_entry *ste;
-	unsigned long offset = __get_cpu_var(stab_cache_ptr);
+	unsigned long offset;
 	unsigned long pc = KSTK_EIP(tsk);
 	unsigned long stack = KSTK_ESP(tsk);
 	unsigned long unmapped_base;
@@ -172,6 +172,15 @@ void switch_stab(struct task_struct *tsk, struct mm_struct *mm)
 	/* Force previous translations to complete. DRENG */
 	asm volatile("isync" : : : "memory");
 
+	/*
+	 * We need interrupts hard-disabled here, not just soft-disabled,
+	 * so that a PMU interrupt can't occur, which might try to access
+	 * user memory (to get a stack trace) and possible cause an STAB miss
+	 * which would update the stab_cache/stab_cache_ptr per-cpu variables.
+	 */
+	hard_irq_disable();
+
+	offset = __get_cpu_var(stab_cache_ptr);
 	if (offset <= NR_STAB_CACHE_ENTRIES) {
 		int i;
 
-- 
cgit v1.2.3


From 20002ded4d937ca87aca6253b874920a96a763c4 Mon Sep 17 00:00:00 2001
From: Paul Mackerras <paulus@samba.org>
Date: Tue, 18 Aug 2009 08:25:32 +1000
Subject: perf_counter: powerpc: Add callchain support

This adds support for tracing callchains for powerpc, both 32-bit
and 64-bit, and both in the kernel and userspace, from PMU interrupt
context.

The first three entries stored for each callchain are the NIP (next
instruction pointer), LR (link register), and the contents of the LR
save area in the second stack frame (the first is ignored because the
ABI convention on powerpc is that functions save their return address
in their caller's stack frame).  Because leaf functions don't have to
save their return address (LR value) and don't have to establish a
stack frame, it's possible for either or both of LR and the second
stack frame's LR save area to have valid return addresses in them.
This is basically impossible to disambiguate without either reading
the code or looking at auxiliary information such as CFI tables.
Since we don't want to do either of those things at interrupt time,
we store both LR and the second stack frame's LR save area.

Once we get past the second stack frame, there is no ambiguity; all
return addresses we get are reliable.

For kernel traces, we check whether they are valid kernel instruction
addresses and store zero instead if they are not (rather than
omitting them, which would make it impossible for userspace to know
which was which).  We also store zero instead of the second stack
frame's LR save area value if it is the same as LR.

For kernel traces, we check for interrupt frames, and for user traces,
we check for signal frames.  In each case, since we're starting a new
trace, we store a PERF_CONTEXT_KERNEL/USER marker so that userspace
knows that the next three entries are NIP, LR and the second stack frame
for the interrupted context.

We read user memory with __get_user_inatomic.  On 64-bit, if this
PMU interrupt occurred while interrupts are soft-disabled, and
there is no MMU hash table entry for the page, we will get an
-EFAULT return from __get_user_inatomic even if there is a valid
Linux PTE for the page, since hash_page isn't reentrant.  Thus we
have code here to read the Linux PTE and access the page via the
kernel linear mapping.  Since 64-bit doesn't use (or need) highmem
there is no need to do kmap_atomic.  On 32-bit, we don't do soft
interrupt disabling, so this complication doesn't occur and there
is no need to fall back to reading the Linux PTE, since hash_page
(or the TLB miss handler) will get called automatically if necessary.

Note that we cannot get PMU interrupts in the interval during
context switch between switch_mm (which switches the user address
space) and switch_to (which actually changes current to the new
process).  On 64-bit this is because interrupts are hard-disabled
in switch_mm and stay hard-disabled until they are soft-enabled
later, after switch_to has returned.  So there is no possibility
of trying to do a user stack trace when the user address space is
not current's address space.

Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 arch/powerpc/kernel/Makefile         |   2 +-
 arch/powerpc/kernel/perf_callchain.c | 527 +++++++++++++++++++++++++++++++++++
 2 files changed, 528 insertions(+), 1 deletion(-)
 create mode 100644 arch/powerpc/kernel/perf_callchain.c

(limited to 'arch')

diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index b73396b9390..9619285f64e 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -97,7 +97,7 @@ obj64-$(CONFIG_AUDIT)		+= compat_audit.o
 
 obj-$(CONFIG_DYNAMIC_FTRACE)	+= ftrace.o
 obj-$(CONFIG_FUNCTION_GRAPH_TRACER)	+= ftrace.o
-obj-$(CONFIG_PPC_PERF_CTRS)	+= perf_counter.o
+obj-$(CONFIG_PPC_PERF_CTRS)	+= perf_counter.o perf_callchain.o
 obj64-$(CONFIG_PPC_PERF_CTRS)	+= power4-pmu.o ppc970-pmu.o power5-pmu.o \
 				   power5+-pmu.o power6-pmu.o power7-pmu.o
 obj32-$(CONFIG_PPC_PERF_CTRS)	+= mpc7450-pmu.o
diff --git a/arch/powerpc/kernel/perf_callchain.c b/arch/powerpc/kernel/perf_callchain.c
new file mode 100644
index 00000000000..f74b62c6751
--- /dev/null
+++ b/arch/powerpc/kernel/perf_callchain.c
@@ -0,0 +1,527 @@
+/*
+ * Performance counter callchain support - powerpc architecture code
+ *
+ * Copyright © 2009 Paul Mackerras, IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/perf_counter.h>
+#include <linux/percpu.h>
+#include <linux/uaccess.h>
+#include <linux/mm.h>
+#include <asm/ptrace.h>
+#include <asm/pgtable.h>
+#include <asm/sigcontext.h>
+#include <asm/ucontext.h>
+#include <asm/vdso.h>
+#ifdef CONFIG_PPC64
+#include "ppc32.h"
+#endif
+
+/*
+ * Store another value in a callchain_entry.
+ */
+static inline void callchain_store(struct perf_callchain_entry *entry, u64 ip)
+{
+	unsigned int nr = entry->nr;
+
+	if (nr < PERF_MAX_STACK_DEPTH) {
+		entry->ip[nr] = ip;
+		entry->nr = nr + 1;
+	}
+}
+
+/*
+ * Is sp valid as the address of the next kernel stack frame after prev_sp?
+ * The next frame may be in a different stack area but should not go
+ * back down in the same stack area.
+ */
+static int valid_next_sp(unsigned long sp, unsigned long prev_sp)
+{
+	if (sp & 0xf)
+		return 0;		/* must be 16-byte aligned */
+	if (!validate_sp(sp, current, STACK_FRAME_OVERHEAD))
+		return 0;
+	if (sp >= prev_sp + STACK_FRAME_OVERHEAD)
+		return 1;
+	/*
+	 * sp could decrease when we jump off an interrupt stack
+	 * back to the regular process stack.
+	 */
+	if ((sp & ~(THREAD_SIZE - 1)) != (prev_sp & ~(THREAD_SIZE - 1)))
+		return 1;
+	return 0;
+}
+
+static void perf_callchain_kernel(struct pt_regs *regs,
+				  struct perf_callchain_entry *entry)
+{
+	unsigned long sp, next_sp;
+	unsigned long next_ip;
+	unsigned long lr;
+	long level = 0;
+	unsigned long *fp;
+
+	lr = regs->link;
+	sp = regs->gpr[1];
+	callchain_store(entry, PERF_CONTEXT_KERNEL);
+	callchain_store(entry, regs->nip);
+
+	if (!validate_sp(sp, current, STACK_FRAME_OVERHEAD))
+		return;
+
+	for (;;) {
+		fp = (unsigned long *) sp;
+		next_sp = fp[0];
+
+		if (next_sp == sp + STACK_INT_FRAME_SIZE &&
+		    fp[STACK_FRAME_MARKER] == STACK_FRAME_REGS_MARKER) {
+			/*
+			 * This looks like an interrupt frame for an
+			 * interrupt that occurred in the kernel
+			 */
+			regs = (struct pt_regs *)(sp + STACK_FRAME_OVERHEAD);
+			next_ip = regs->nip;
+			lr = regs->link;
+			level = 0;
+			callchain_store(entry, PERF_CONTEXT_KERNEL);
+
+		} else {
+			if (level == 0)
+				next_ip = lr;
+			else
+				next_ip = fp[STACK_FRAME_LR_SAVE];
+
+			/*
+			 * We can't tell which of the first two addresses
+			 * we get are valid, but we can filter out the
+			 * obviously bogus ones here.  We replace them
+			 * with 0 rather than removing them entirely so
+			 * that userspace can tell which is which.
+			 */
+			if ((level == 1 && next_ip == lr) ||
+			    (level <= 1 && !kernel_text_address(next_ip)))
+				next_ip = 0;
+
+			++level;
+		}
+
+		callchain_store(entry, next_ip);
+		if (!valid_next_sp(next_sp, sp))
+			return;
+		sp = next_sp;
+	}
+}
+
+#ifdef CONFIG_PPC64
+
+#ifdef CONFIG_HUGETLB_PAGE
+#define is_huge_psize(pagesize)	(HPAGE_SHIFT && mmu_huge_psizes[pagesize])
+#else
+#define is_huge_psize(pagesize)	0
+#endif
+
+/*
+ * On 64-bit we don't want to invoke hash_page on user addresses from
+ * interrupt context, so if the access faults, we read the page tables
+ * to find which page (if any) is mapped and access it directly.
+ */
+static int read_user_stack_slow(void __user *ptr, void *ret, int nb)
+{
+	pgd_t *pgdir;
+	pte_t *ptep, pte;
+	int pagesize;
+	unsigned long addr = (unsigned long) ptr;
+	unsigned long offset;
+	unsigned long pfn;
+	void *kaddr;
+
+	pgdir = current->mm->pgd;
+	if (!pgdir)
+		return -EFAULT;
+
+	pagesize = get_slice_psize(current->mm, addr);
+
+	/* align address to page boundary */
+	offset = addr & ((1ul << mmu_psize_defs[pagesize].shift) - 1);
+	addr -= offset;
+
+	if (is_huge_psize(pagesize))
+		ptep = huge_pte_offset(current->mm, addr);
+	else
+		ptep = find_linux_pte(pgdir, addr);
+
+	if (ptep == NULL)
+		return -EFAULT;
+	pte = *ptep;
+	if (!pte_present(pte) || !(pte_val(pte) & _PAGE_USER))
+		return -EFAULT;
+	pfn = pte_pfn(pte);
+	if (!page_is_ram(pfn))
+		return -EFAULT;
+
+	/* no highmem to worry about here */
+	kaddr = pfn_to_kaddr(pfn);
+	memcpy(ret, kaddr + offset, nb);
+	return 0;
+}
+
+static int read_user_stack_64(unsigned long __user *ptr, unsigned long *ret)
+{
+	if ((unsigned long)ptr > TASK_SIZE - sizeof(unsigned long) ||
+	    ((unsigned long)ptr & 7))
+		return -EFAULT;
+
+	if (!__get_user_inatomic(*ret, ptr))
+		return 0;
+
+	return read_user_stack_slow(ptr, ret, 8);
+}
+
+static int read_user_stack_32(unsigned int __user *ptr, unsigned int *ret)
+{
+	if ((unsigned long)ptr > TASK_SIZE - sizeof(unsigned int) ||
+	    ((unsigned long)ptr & 3))
+		return -EFAULT;
+
+	if (!__get_user_inatomic(*ret, ptr))
+		return 0;
+
+	return read_user_stack_slow(ptr, ret, 4);
+}
+
+static inline int valid_user_sp(unsigned long sp, int is_64)
+{
+	if (!sp || (sp & 7) || sp > (is_64 ? TASK_SIZE : 0x100000000UL) - 32)
+		return 0;
+	return 1;
+}
+
+/*
+ * 64-bit user processes use the same stack frame for RT and non-RT signals.
+ */
+struct signal_frame_64 {
+	char		dummy[__SIGNAL_FRAMESIZE];
+	struct ucontext	uc;
+	unsigned long	unused[2];
+	unsigned int	tramp[6];
+	struct siginfo	*pinfo;
+	void		*puc;
+	struct siginfo	info;
+	char		abigap[288];
+};
+
+static int is_sigreturn_64_address(unsigned long nip, unsigned long fp)
+{
+	if (nip == fp + offsetof(struct signal_frame_64, tramp))
+		return 1;
+	if (vdso64_rt_sigtramp && current->mm->context.vdso_base &&
+	    nip == current->mm->context.vdso_base + vdso64_rt_sigtramp)
+		return 1;
+	return 0;
+}
+
+/*
+ * Do some sanity checking on the signal frame pointed to by sp.
+ * We check the pinfo and puc pointers in the frame.
+ */
+static int sane_signal_64_frame(unsigned long sp)
+{
+	struct signal_frame_64 __user *sf;
+	unsigned long pinfo, puc;
+
+	sf = (struct signal_frame_64 __user *) sp;
+	if (read_user_stack_64((unsigned long __user *) &sf->pinfo, &pinfo) ||
+	    read_user_stack_64((unsigned long __user *) &sf->puc, &puc))
+		return 0;
+	return pinfo == (unsigned long) &sf->info &&
+		puc == (unsigned long) &sf->uc;
+}
+
+static void perf_callchain_user_64(struct pt_regs *regs,
+				   struct perf_callchain_entry *entry)
+{
+	unsigned long sp, next_sp;
+	unsigned long next_ip;
+	unsigned long lr;
+	long level = 0;
+	struct signal_frame_64 __user *sigframe;
+	unsigned long __user *fp, *uregs;
+
+	next_ip = regs->nip;
+	lr = regs->link;
+	sp = regs->gpr[1];
+	callchain_store(entry, PERF_CONTEXT_USER);
+	callchain_store(entry, next_ip);
+
+	for (;;) {
+		fp = (unsigned long __user *) sp;
+		if (!valid_user_sp(sp, 1) || read_user_stack_64(fp, &next_sp))
+			return;
+		if (level > 0 && read_user_stack_64(&fp[2], &next_ip))
+			return;
+
+		/*
+		 * Note: the next_sp - sp >= signal frame size check
+		 * is true when next_sp < sp, which can happen when
+		 * transitioning from an alternate signal stack to the
+		 * normal stack.
+		 */
+		if (next_sp - sp >= sizeof(struct signal_frame_64) &&
+		    (is_sigreturn_64_address(next_ip, sp) ||
+		     (level <= 1 && is_sigreturn_64_address(lr, sp))) &&
+		    sane_signal_64_frame(sp)) {
+			/*
+			 * This looks like an signal frame
+			 */
+			sigframe = (struct signal_frame_64 __user *) sp;
+			uregs = sigframe->uc.uc_mcontext.gp_regs;
+			if (read_user_stack_64(&uregs[PT_NIP], &next_ip) ||
+			    read_user_stack_64(&uregs[PT_LNK], &lr) ||
+			    read_user_stack_64(&uregs[PT_R1], &sp))
+				return;
+			level = 0;
+			callchain_store(entry, PERF_CONTEXT_USER);
+			callchain_store(entry, next_ip);
+			continue;
+		}
+
+		if (level == 0)
+			next_ip = lr;
+		callchain_store(entry, next_ip);
+		++level;
+		sp = next_sp;
+	}
+}
+
+static inline int current_is_64bit(void)
+{
+	/*
+	 * We can't use test_thread_flag() here because we may be on an
+	 * interrupt stack, and the thread flags don't get copied over
+	 * from the thread_info on the main stack to the interrupt stack.
+	 */
+	return !test_ti_thread_flag(task_thread_info(current), TIF_32BIT);
+}
+
+#else  /* CONFIG_PPC64 */
+/*
+ * On 32-bit we just access the address and let hash_page create a
+ * HPTE if necessary, so there is no need to fall back to reading
+ * the page tables.  Since this is called at interrupt level,
+ * do_page_fault() won't treat a DSI as a page fault.
+ */
+static int read_user_stack_32(unsigned int __user *ptr, unsigned int *ret)
+{
+	if ((unsigned long)ptr > TASK_SIZE - sizeof(unsigned int) ||
+	    ((unsigned long)ptr & 3))
+		return -EFAULT;
+
+	return __get_user_inatomic(*ret, ptr);
+}
+
+static inline void perf_callchain_user_64(struct pt_regs *regs,
+					  struct perf_callchain_entry *entry)
+{
+}
+
+static inline int current_is_64bit(void)
+{
+	return 0;
+}
+
+static inline int valid_user_sp(unsigned long sp, int is_64)
+{
+	if (!sp || (sp & 7) || sp > TASK_SIZE - 32)
+		return 0;
+	return 1;
+}
+
+#define __SIGNAL_FRAMESIZE32	__SIGNAL_FRAMESIZE
+#define sigcontext32		sigcontext
+#define mcontext32		mcontext
+#define ucontext32		ucontext
+#define compat_siginfo_t	struct siginfo
+
+#endif /* CONFIG_PPC64 */
+
+/*
+ * Layout for non-RT signal frames
+ */
+struct signal_frame_32 {
+	char			dummy[__SIGNAL_FRAMESIZE32];
+	struct sigcontext32	sctx;
+	struct mcontext32	mctx;
+	int			abigap[56];
+};
+
+/*
+ * Layout for RT signal frames
+ */
+struct rt_signal_frame_32 {
+	char			dummy[__SIGNAL_FRAMESIZE32 + 16];
+	compat_siginfo_t	info;
+	struct ucontext32	uc;
+	int			abigap[56];
+};
+
+static int is_sigreturn_32_address(unsigned int nip, unsigned int fp)
+{
+	if (nip == fp + offsetof(struct signal_frame_32, mctx.mc_pad))
+		return 1;
+	if (vdso32_sigtramp && current->mm->context.vdso_base &&
+	    nip == current->mm->context.vdso_base + vdso32_sigtramp)
+		return 1;
+	return 0;
+}
+
+static int is_rt_sigreturn_32_address(unsigned int nip, unsigned int fp)
+{
+	if (nip == fp + offsetof(struct rt_signal_frame_32,
+				 uc.uc_mcontext.mc_pad))
+		return 1;
+	if (vdso32_rt_sigtramp && current->mm->context.vdso_base &&
+	    nip == current->mm->context.vdso_base + vdso32_rt_sigtramp)
+		return 1;
+	return 0;
+}
+
+static int sane_signal_32_frame(unsigned int sp)
+{
+	struct signal_frame_32 __user *sf;
+	unsigned int regs;
+
+	sf = (struct signal_frame_32 __user *) (unsigned long) sp;
+	if (read_user_stack_32((unsigned int __user *) &sf->sctx.regs, &regs))
+		return 0;
+	return regs == (unsigned long) &sf->mctx;
+}
+
+static int sane_rt_signal_32_frame(unsigned int sp)
+{
+	struct rt_signal_frame_32 __user *sf;
+	unsigned int regs;
+
+	sf = (struct rt_signal_frame_32 __user *) (unsigned long) sp;
+	if (read_user_stack_32((unsigned int __user *) &sf->uc.uc_regs, &regs))
+		return 0;
+	return regs == (unsigned long) &sf->uc.uc_mcontext;
+}
+
+static unsigned int __user *signal_frame_32_regs(unsigned int sp,
+				unsigned int next_sp, unsigned int next_ip)
+{
+	struct mcontext32 __user *mctx = NULL;
+	struct signal_frame_32 __user *sf;
+	struct rt_signal_frame_32 __user *rt_sf;
+
+	/*
+	 * Note: the next_sp - sp >= signal frame size check
+	 * is true when next_sp < sp, for example, when
+	 * transitioning from an alternate signal stack to the
+	 * normal stack.
+	 */
+	if (next_sp - sp >= sizeof(struct signal_frame_32) &&
+	    is_sigreturn_32_address(next_ip, sp) &&
+	    sane_signal_32_frame(sp)) {
+		sf = (struct signal_frame_32 __user *) (unsigned long) sp;
+		mctx = &sf->mctx;
+	}
+
+	if (!mctx && next_sp - sp >= sizeof(struct rt_signal_frame_32) &&
+	    is_rt_sigreturn_32_address(next_ip, sp) &&
+	    sane_rt_signal_32_frame(sp)) {
+		rt_sf = (struct rt_signal_frame_32 __user *) (unsigned long) sp;
+		mctx = &rt_sf->uc.uc_mcontext;
+	}
+
+	if (!mctx)
+		return NULL;
+	return mctx->mc_gregs;
+}
+
+static void perf_callchain_user_32(struct pt_regs *regs,
+				   struct perf_callchain_entry *entry)
+{
+	unsigned int sp, next_sp;
+	unsigned int next_ip;
+	unsigned int lr;
+	long level = 0;
+	unsigned int __user *fp, *uregs;
+
+	next_ip = regs->nip;
+	lr = regs->link;
+	sp = regs->gpr[1];
+	callchain_store(entry, PERF_CONTEXT_USER);
+	callchain_store(entry, next_ip);
+
+	while (entry->nr < PERF_MAX_STACK_DEPTH) {
+		fp = (unsigned int __user *) (unsigned long) sp;
+		if (!valid_user_sp(sp, 0) || read_user_stack_32(fp, &next_sp))
+			return;
+		if (level > 0 && read_user_stack_32(&fp[1], &next_ip))
+			return;
+
+		uregs = signal_frame_32_regs(sp, next_sp, next_ip);
+		if (!uregs && level <= 1)
+			uregs = signal_frame_32_regs(sp, next_sp, lr);
+		if (uregs) {
+			/*
+			 * This looks like an signal frame, so restart
+			 * the stack trace with the values in it.
+			 */
+			if (read_user_stack_32(&uregs[PT_NIP], &next_ip) ||
+			    read_user_stack_32(&uregs[PT_LNK], &lr) ||
+			    read_user_stack_32(&uregs[PT_R1], &sp))
+				return;
+			level = 0;
+			callchain_store(entry, PERF_CONTEXT_USER);
+			callchain_store(entry, next_ip);
+			continue;
+		}
+
+		if (level == 0)
+			next_ip = lr;
+		callchain_store(entry, next_ip);
+		++level;
+		sp = next_sp;
+	}
+}
+
+/*
+ * Since we can't get PMU interrupts inside a PMU interrupt handler,
+ * we don't need separate irq and nmi entries here.
+ */
+static DEFINE_PER_CPU(struct perf_callchain_entry, callchain);
+
+struct perf_callchain_entry *perf_callchain(struct pt_regs *regs)
+{
+	struct perf_callchain_entry *entry = &__get_cpu_var(callchain);
+
+	entry->nr = 0;
+
+	if (current->pid == 0)		/* idle task? */
+		return entry;
+
+	if (!user_mode(regs)) {
+		perf_callchain_kernel(regs, entry);
+		if (current->mm)
+			regs = task_pt_regs(current);
+		else
+			regs = NULL;
+	}
+
+	if (regs) {
+		if (current_is_64bit())
+			perf_callchain_user_64(regs, entry);
+		else
+			perf_callchain_user_32(regs, entry);
+	}
+
+	return entry;
+}
-- 
cgit v1.2.3


From 0914b93f4f36d1a0233bd64da9a35e37e72304ec Mon Sep 17 00:00:00 2001
From: Joonyoung Shim <jy0922.shim@samsung.com>
Date: Tue, 18 Aug 2009 21:56:19 +0900
Subject: ASoC: Fix data format configuration for S3C64XX IISv2

The data format configuration for S3C64xx IISv2 was hardcoded for IISMOD
register. This patch changes to the defined values it.

And instead of bits 9 and 10 of IISMOD we should clear bits 13 and 14.

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h | 5 +++++
 1 file changed, 5 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h b/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h
index 0fad7571030..07659dad174 100644
--- a/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h
+++ b/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h
@@ -33,6 +33,11 @@
 #define S3C2412_IISCON_RXDMA_ACTIVE	(1 << 1)
 #define S3C2412_IISCON_IIS_ACTIVE	(1 << 0)
 
+#define S3C64XX_IISMOD_BLC_16BIT	(0 << 13)
+#define S3C64XX_IISMOD_BLC_8BIT		(1 << 13)
+#define S3C64XX_IISMOD_BLC_24BIT	(2 << 13)
+#define S3C64XX_IISMOD_BLC_MASK		(3 << 13)
+
 #define S3C64XX_IISMOD_IMS_PCLK		(0 << 10)
 #define S3C64XX_IISMOD_IMS_SYSMUX	(1 << 10)
 
-- 
cgit v1.2.3


From 66dc3304f3875ea85c630a57a88ecf79032890c4 Mon Sep 17 00:00:00 2001
From: Gerhard Pircher <gerhard_pircher@gmx.net>
Date: Fri, 19 Jun 2009 11:40:57 +0000
Subject: powerpc/amigaone: Convert amigaone_init() to a
 machine_device_initcall()

This allows to remove the ppc_md.init() hook in the setup code.

Signed-off-by: Gerhard Pircher <gerhard_pircher@gmx.net>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/platforms/amigaone/setup.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/platforms/amigaone/setup.c b/arch/powerpc/platforms/amigaone/setup.c
index 443035366c1..9290a7a442d 100644
--- a/arch/powerpc/platforms/amigaone/setup.c
+++ b/arch/powerpc/platforms/amigaone/setup.c
@@ -110,13 +110,16 @@ void __init amigaone_init_IRQ(void)
 	irq_set_default_host(i8259_get_host());
 }
 
-void __init amigaone_init(void)
+static int __init request_isa_regions(void)
 {
 	request_region(0x00, 0x20, "dma1");
 	request_region(0x40, 0x20, "timer");
 	request_region(0x80, 0x10, "dma page reg");
 	request_region(0xc0, 0x20, "dma2");
+
+	return 0;
 }
+machine_device_initcall(amigaone, request_isa_regions);
 
 void amigaone_restart(char *cmd)
 {
@@ -161,7 +164,6 @@ define_machine(amigaone) {
 	.name			= "AmigaOne",
 	.probe			= amigaone_probe,
 	.setup_arch		= amigaone_setup_arch,
-	.init			= amigaone_init,
 	.show_cpuinfo		= amigaone_show_cpuinfo,
 	.init_IRQ		= amigaone_init_IRQ,
 	.restart		= amigaone_restart,
-- 
cgit v1.2.3


From 11a6b292c1bc9cb39970e44edd6958250f23d3a8 Mon Sep 17 00:00:00 2001
From: Michael Ellerman <michael@ellerman.id.au>
Date: Sun, 5 Jul 2009 16:08:52 +0000
Subject: powerpc/mpic: Fix MPIC_BROKEN_REGREAD on non broken MPICs

The workaround enabled by CONFIG_MPIC_BROKEN_REGREAD does not work
on non-broken MPICs. The symptom is no interrupts being received.

The fix is twofold. Firstly the code was broken for multiple isus,
we need to index into the shadow array with the src_no, not the idx.
Secondly, we always do the read, but only use the VECPRI_MASK and
VECPRI_ACTIVITY bits from the hardware, the rest of "val" comes
from the shadow.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/sysdev/mpic.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index 3981ae4cb58..30c44e6b041 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -230,14 +230,16 @@ static inline u32 _mpic_irq_read(struct mpic *mpic, unsigned int src_no, unsigne
 {
 	unsigned int	isu = src_no >> mpic->isu_shift;
 	unsigned int	idx = src_no & mpic->isu_mask;
+	unsigned int	val;
 
+	val = _mpic_read(mpic->reg_type, &mpic->isus[isu],
+			 reg + (idx * MPIC_INFO(IRQ_STRIDE)));
 #ifdef CONFIG_MPIC_BROKEN_REGREAD
 	if (reg == 0)
-		return mpic->isu_reg0_shadow[idx];
-	else
+		val = (val & (MPIC_VECPRI_MASK | MPIC_VECPRI_ACTIVITY)) |
+			mpic->isu_reg0_shadow[src_no];
 #endif
-		return _mpic_read(mpic->reg_type, &mpic->isus[isu],
-				  reg + (idx * MPIC_INFO(IRQ_STRIDE)));
+	return val;
 }
 
 static inline void _mpic_irq_write(struct mpic *mpic, unsigned int src_no,
@@ -251,7 +253,8 @@ static inline void _mpic_irq_write(struct mpic *mpic, unsigned int src_no,
 
 #ifdef CONFIG_MPIC_BROKEN_REGREAD
 	if (reg == 0)
-		mpic->isu_reg0_shadow[idx] = value;
+		mpic->isu_reg0_shadow[src_no] =
+			value & ~(MPIC_VECPRI_MASK | MPIC_VECPRI_ACTIVITY);
 #endif
 }
 
-- 
cgit v1.2.3


From 0d2d3e38f72e400f602dade3f0ddffe0b3b9d4df Mon Sep 17 00:00:00 2001
From: Geoff Thorpe <geoff@geoffthorpe.net>
Date: Tue, 7 Jul 2009 15:23:56 +0000
Subject: powerpc: expose the multi-bit ops that underlie single-bit ops.

The bitops.h functions that operate on a single bit in a bitfield are
implemented by operating on the corresponding word location. In all
cases the inner logic is valid if the mask being applied has more than
one bit set, so this patch exposes those inner operations. Indeed,
set_bits() was already available, but it duplicated code from
set_bit() (rather than making the latter a wrapper) - it was also
missing the PPC405_ERR77() workaround and the "volatile" address
qualifier present in other APIs. This corrects that, and exposes the
other multi-bit equivalents.

One advantage of these multi-bit forms is that they allow word-sized
variables to essentially be their own spinlocks, eg. very useful for
state machines where an atomic "flags" variable can obviate the need
for any additional locking.

Signed-off-by: Geoff Thorpe <geoff@geoffthorpe.net>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/bitops.h | 196 ++++++++++++--------------------------
 1 file changed, 62 insertions(+), 134 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/bitops.h b/arch/powerpc/include/asm/bitops.h
index 897eade3afb..56f2f2ea563 100644
--- a/arch/powerpc/include/asm/bitops.h
+++ b/arch/powerpc/include/asm/bitops.h
@@ -56,174 +56,102 @@
 #define BITOP_WORD(nr)		((nr) / BITS_PER_LONG)
 #define BITOP_LE_SWIZZLE	((BITS_PER_LONG-1) & ~0x7)
 
+/* Macro for generating the ***_bits() functions */
+#define DEFINE_BITOP(fn, op, prefix, postfix)	\
+static __inline__ void fn(unsigned long mask,	\
+		volatile unsigned long *_p)	\
+{						\
+	unsigned long old;			\
+	unsigned long *p = (unsigned long *)_p;	\
+	__asm__ __volatile__ (			\
+	prefix					\
+"1:"	PPC_LLARX "%0,0,%3\n"			\
+	stringify_in_c(op) "%0,%0,%2\n"		\
+	PPC405_ERR77(0,%3)			\
+	PPC_STLCX "%0,0,%3\n"			\
+	"bne- 1b\n"				\
+	postfix					\
+	: "=&r" (old), "+m" (*p)		\
+	: "r" (mask), "r" (p)			\
+	: "cc", "memory");			\
+}
+
+DEFINE_BITOP(set_bits, or, "", "")
+DEFINE_BITOP(clear_bits, andc, "", "")
+DEFINE_BITOP(clear_bits_unlock, andc, LWSYNC_ON_SMP, "")
+DEFINE_BITOP(change_bits, xor, "", "")
+
 static __inline__ void set_bit(int nr, volatile unsigned long *addr)
 {
-	unsigned long old;
-	unsigned long mask = BITOP_MASK(nr);
-	unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr);
-
-	__asm__ __volatile__(
-"1:"	PPC_LLARX "%0,0,%3	# set_bit\n"
-	"or	%0,%0,%2\n"
-	PPC405_ERR77(0,%3)
-	PPC_STLCX "%0,0,%3\n"
-	"bne-	1b"
-	: "=&r" (old), "+m" (*p)
-	: "r" (mask), "r" (p)
-	: "cc" );
+	set_bits(BITOP_MASK(nr), addr + BITOP_WORD(nr));
 }
 
 static __inline__ void clear_bit(int nr, volatile unsigned long *addr)
 {
-	unsigned long old;
-	unsigned long mask = BITOP_MASK(nr);
-	unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr);
-
-	__asm__ __volatile__(
-"1:"	PPC_LLARX "%0,0,%3	# clear_bit\n"
-	"andc	%0,%0,%2\n"
-	PPC405_ERR77(0,%3)
-	PPC_STLCX "%0,0,%3\n"
-	"bne-	1b"
-	: "=&r" (old), "+m" (*p)
-	: "r" (mask), "r" (p)
-	: "cc" );
+	clear_bits(BITOP_MASK(nr), addr + BITOP_WORD(nr));
 }
 
 static __inline__ void clear_bit_unlock(int nr, volatile unsigned long *addr)
 {
-	unsigned long old;
-	unsigned long mask = BITOP_MASK(nr);
-	unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr);
-
-	__asm__ __volatile__(
-	LWSYNC_ON_SMP
-"1:"	PPC_LLARX "%0,0,%3	# clear_bit_unlock\n"
-	"andc	%0,%0,%2\n"
-	PPC405_ERR77(0,%3)
-	PPC_STLCX "%0,0,%3\n"
-	"bne-	1b"
-	: "=&r" (old), "+m" (*p)
-	: "r" (mask), "r" (p)
-	: "cc", "memory");
+	clear_bits_unlock(BITOP_MASK(nr), addr + BITOP_WORD(nr));
 }
 
 static __inline__ void change_bit(int nr, volatile unsigned long *addr)
 {
-	unsigned long old;
-	unsigned long mask = BITOP_MASK(nr);
-	unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr);
-
-	__asm__ __volatile__(
-"1:"	PPC_LLARX "%0,0,%3	# change_bit\n"
-	"xor	%0,%0,%2\n"
-	PPC405_ERR77(0,%3)
-	PPC_STLCX "%0,0,%3\n"
-	"bne-	1b"
-	: "=&r" (old), "+m" (*p)
-	: "r" (mask), "r" (p)
-	: "cc" );
+	change_bits(BITOP_MASK(nr), addr + BITOP_WORD(nr));
+}
+
+/* Like DEFINE_BITOP(), with changes to the arguments to 'op' and the output
+ * operands. */
+#define DEFINE_TESTOP(fn, op, prefix, postfix)	\
+static __inline__ unsigned long fn(		\
+		unsigned long mask,		\
+		volatile unsigned long *_p)	\
+{						\
+	unsigned long old, t;			\
+	unsigned long *p = (unsigned long *)_p;	\
+	__asm__ __volatile__ (			\
+	prefix					\
+"1:"	PPC_LLARX "%0,0,%3\n"			\
+	stringify_in_c(op) "%1,%0,%2\n"		\
+	PPC405_ERR77(0,%3)			\
+	PPC_STLCX "%1,0,%3\n"			\
+	"bne- 1b\n"				\
+	postfix					\
+	: "=&r" (old), "=&r" (t)		\
+	: "r" (mask), "r" (p)			\
+	: "cc", "memory");			\
+	return (old & mask);			\
 }
 
+DEFINE_TESTOP(test_and_set_bits, or, LWSYNC_ON_SMP, ISYNC_ON_SMP)
+DEFINE_TESTOP(test_and_set_bits_lock, or, "", ISYNC_ON_SMP)
+DEFINE_TESTOP(test_and_clear_bits, andc, LWSYNC_ON_SMP, ISYNC_ON_SMP)
+DEFINE_TESTOP(test_and_change_bits, xor, LWSYNC_ON_SMP, ISYNC_ON_SMP)
+
 static __inline__ int test_and_set_bit(unsigned long nr,
 				       volatile unsigned long *addr)
 {
-	unsigned long old, t;
-	unsigned long mask = BITOP_MASK(nr);
-	unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr);
-
-	__asm__ __volatile__(
-	LWSYNC_ON_SMP
-"1:"	PPC_LLARX "%0,0,%3		# test_and_set_bit\n"
-	"or	%1,%0,%2 \n"
-	PPC405_ERR77(0,%3)
-	PPC_STLCX "%1,0,%3 \n"
-	"bne-	1b"
-	ISYNC_ON_SMP
-	: "=&r" (old), "=&r" (t)
-	: "r" (mask), "r" (p)
-	: "cc", "memory");
-
-	return (old & mask) != 0;
+	return test_and_set_bits(BITOP_MASK(nr), addr + BITOP_WORD(nr)) != 0;
 }
 
 static __inline__ int test_and_set_bit_lock(unsigned long nr,
 				       volatile unsigned long *addr)
 {
-	unsigned long old, t;
-	unsigned long mask = BITOP_MASK(nr);
-	unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr);
-
-	__asm__ __volatile__(
-"1:"	PPC_LLARX "%0,0,%3		# test_and_set_bit_lock\n"
-	"or	%1,%0,%2 \n"
-	PPC405_ERR77(0,%3)
-	PPC_STLCX "%1,0,%3 \n"
-	"bne-	1b"
-	ISYNC_ON_SMP
-	: "=&r" (old), "=&r" (t)
-	: "r" (mask), "r" (p)
-	: "cc", "memory");
-
-	return (old & mask) != 0;
+	return test_and_set_bits_lock(BITOP_MASK(nr),
+				addr + BITOP_WORD(nr)) != 0;
 }
 
 static __inline__ int test_and_clear_bit(unsigned long nr,
 					 volatile unsigned long *addr)
 {
-	unsigned long old, t;
-	unsigned long mask = BITOP_MASK(nr);
-	unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr);
-
-	__asm__ __volatile__(
-	LWSYNC_ON_SMP
-"1:"	PPC_LLARX "%0,0,%3		# test_and_clear_bit\n"
-	"andc	%1,%0,%2 \n"
-	PPC405_ERR77(0,%3)
-	PPC_STLCX "%1,0,%3 \n"
-	"bne-	1b"
-	ISYNC_ON_SMP
-	: "=&r" (old), "=&r" (t)
-	: "r" (mask), "r" (p)
-	: "cc", "memory");
-
-	return (old & mask) != 0;
+	return test_and_clear_bits(BITOP_MASK(nr), addr + BITOP_WORD(nr)) != 0;
 }
 
 static __inline__ int test_and_change_bit(unsigned long nr,
 					  volatile unsigned long *addr)
 {
-	unsigned long old, t;
-	unsigned long mask = BITOP_MASK(nr);
-	unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr);
-
-	__asm__ __volatile__(
-	LWSYNC_ON_SMP
-"1:"	PPC_LLARX "%0,0,%3		# test_and_change_bit\n"
-	"xor	%1,%0,%2 \n"
-	PPC405_ERR77(0,%3)
-	PPC_STLCX "%1,0,%3 \n"
-	"bne-	1b"
-	ISYNC_ON_SMP
-	: "=&r" (old), "=&r" (t)
-	: "r" (mask), "r" (p)
-	: "cc", "memory");
-
-	return (old & mask) != 0;
-}
-
-static __inline__ void set_bits(unsigned long mask, unsigned long *addr)
-{
-        unsigned long old;
-
-	__asm__ __volatile__(
-"1:"	PPC_LLARX "%0,0,%3         # set_bits\n"
-	"or	%0,%0,%2\n"
-	PPC_STLCX "%0,0,%3\n"
-	"bne-	1b"
-	: "=&r" (old), "+m" (*addr)
-	: "r" (mask), "r" (addr)
-	: "cc");
+	return test_and_change_bits(BITOP_MASK(nr), addr + BITOP_WORD(nr)) != 0;
 }
 
 #include <asm-generic/bitops/non-atomic.h>
-- 
cgit v1.2.3


From 30d0b3682887a81f0335b42f20116fd40d743371 Mon Sep 17 00:00:00 2001
From: Anton Blanchard <anton@samba.org>
Date: Mon, 13 Jul 2009 20:53:51 +0000
Subject: powerpc: Move 64bit VDSO to improve context switch performance

On 64bit applications the VDSO is the only thing in segment 0. Since the VDSO
is position independent we can remove the hint and let get_unmapped_area pick
an area. This will mean the vdso will be near other mmaps and will share
an SLB entry:

10000000-10001000 r-xp 00000000 08:06 5778459        /root/context_switch_64
10010000-10011000 r--p 00000000 08:06 5778459        /root/context_switch_64
10011000-10012000 rw-p 00001000 08:06 5778459        /root/context_switch_64
fffa92ae000-fffa92b0000 rw-p 00000000 00:00 0
fffa92b0000-fffa9453000 r-xp 00000000 08:06 4334051  /lib64/power6/libc-2.9.so
fffa9453000-fffa9462000 ---p 001a3000 08:06 4334051  /lib64/power6/libc-2.9.so
fffa9462000-fffa9466000 r--p 001a2000 08:06 4334051  /lib64/power6/libc-2.9.so
fffa9466000-fffa947c000 rw-p 001a6000 08:06 4334051  /lib64/power6/libc-2.9.so
fffa947c000-fffa9480000 rw-p 00000000 00:00 0
fffa9480000-fffa94a8000 r-xp 00000000 08:06 4333852  /lib64/ld-2.9.so
fffa94b3000-fffa94b4000 rw-p 00000000 00:00 0

fffa94b4000-fffa94b7000 r-xp 00000000 00:00 0        [vdso] <----- here I am

fffa94b7000-fffa94b8000 r--p 00027000 08:06 4333852  /lib64/ld-2.9.so
fffa94b8000-fffa94bb000 rw-p 00028000 08:06 4333852  /lib64/ld-2.9.so
fffa94bb000-fffa94bc000 rw-p 00000000 00:00 0
fffe4c10000-fffe4c25000 rw-p 00000000 00:00 0        [stack]

On a microbenchmark that bounces a token between two 64bit processes over pipes
and calls gettimeofday each iteration (to access the VDSO), our context switch
rate goes from 268k to 277k ctx switches/sec (tested on a 4GHz POWER6).

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/vdso.h | 3 +--
 arch/powerpc/kernel/vdso.c      | 7 ++++++-
 2 files changed, 7 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/vdso.h b/arch/powerpc/include/asm/vdso.h
index 26fc449bd98..dc0419b66f1 100644
--- a/arch/powerpc/include/asm/vdso.h
+++ b/arch/powerpc/include/asm/vdso.h
@@ -7,9 +7,8 @@
 #define VDSO32_LBASE	0x100000
 #define VDSO64_LBASE	0x100000
 
-/* Default map addresses */
+/* Default map addresses for 32bit vDSO */
 #define VDSO32_MBASE	VDSO32_LBASE
-#define VDSO64_MBASE	VDSO64_LBASE
 
 #define VDSO_VERSION_STRING	LINUX_2.6.15
 
diff --git a/arch/powerpc/kernel/vdso.c b/arch/powerpc/kernel/vdso.c
index ad06d5c75b1..a0abce251d0 100644
--- a/arch/powerpc/kernel/vdso.c
+++ b/arch/powerpc/kernel/vdso.c
@@ -203,7 +203,12 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp)
 	} else {
 		vdso_pagelist = vdso64_pagelist;
 		vdso_pages = vdso64_pages;
-		vdso_base = VDSO64_MBASE;
+		/*
+		 * On 64bit we don't have a preferred map address. This
+		 * allows get_unmapped_area to find an area near other mmaps
+		 * and most likely share a SLB entry.
+		 */
+		vdso_base = 0;
 	}
 #else
 	vdso_pagelist = vdso32_pagelist;
-- 
cgit v1.2.3


From 5eb9bac0406f2beb84b21aac6feb89d33d9f3f5c Mon Sep 17 00:00:00 2001
From: Anton Blanchard <anton@samba.org>
Date: Mon, 13 Jul 2009 20:53:52 +0000
Subject: powerpc: Rearrange SLB preload code

With the new top down layout it is likely that the pc and stack will be in the
same segment, because the pc is most likely in a library allocated via a top
down mmap. Right now we bail out early if these segments match.

Rearrange the SLB preload code to sanity check all SLB preload addresses
are not in the kernel, then check all addresses for conflicts.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/mm/slb.c | 21 ++++++++-------------
 1 file changed, 8 insertions(+), 13 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c
index 5b7038f248b..227056c21ee 100644
--- a/arch/powerpc/mm/slb.c
+++ b/arch/powerpc/mm/slb.c
@@ -218,23 +218,18 @@ void switch_slb(struct task_struct *tsk, struct mm_struct *mm)
 	else
 		unmapped_base = TASK_UNMAPPED_BASE_USER64;
 
-	if (is_kernel_addr(pc))
-		return;
-	slb_allocate(pc);
-
-	if (esids_match(pc,stack))
+	if (is_kernel_addr(pc) || is_kernel_addr(stack) ||
+	    is_kernel_addr(unmapped_base))
 		return;
 
-	if (is_kernel_addr(stack))
-		return;
-	slb_allocate(stack);
+	slb_allocate(pc);
 
-	if (esids_match(pc,unmapped_base) || esids_match(stack,unmapped_base))
-		return;
+	if (!esids_match(pc, stack))
+		slb_allocate(stack);
 
-	if (is_kernel_addr(unmapped_base))
-		return;
-	slb_allocate(unmapped_base);
+	if (!esids_match(pc, unmapped_base) &&
+	    !esids_match(stack, unmapped_base))
+		slb_allocate(unmapped_base);
 }
 
 static inline void patch_slb_encoding(unsigned int *insn_addr,
-- 
cgit v1.2.3


From de4376c2846bb5a8fc6fe8dbd0e4ff30905493e6 Mon Sep 17 00:00:00 2001
From: Anton Blanchard <anton@samba.org>
Date: Mon, 13 Jul 2009 20:53:53 +0000
Subject: powerpc: Preload application text segment instead of
 TASK_UNMAPPED_BASE

TASK_UNMAPPED_BASE is not used with the new top down mmap layout. We can
reuse this preload slot by loading in the segment at 0x10000000, where almost
all PowerPC binaries are linked at.

On a microbenchmark that bounces a token between two 64bit processes over pipes
and calls gettimeofday each iteration (to access the VDSO), both the 32bit and
64bit context switch rate improves (tested on a 4GHz POWER6):

32bit: 273k/sec -> 283k/sec
64bit: 277k/sec -> 284k/sec

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/mm/slb.c | 17 ++++++++---------
 1 file changed, 8 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c
index 227056c21ee..6bc8b4aeba5 100644
--- a/arch/powerpc/mm/slb.c
+++ b/arch/powerpc/mm/slb.c
@@ -184,7 +184,7 @@ void switch_slb(struct task_struct *tsk, struct mm_struct *mm)
 	unsigned long slbie_data = 0;
 	unsigned long pc = KSTK_EIP(tsk);
 	unsigned long stack = KSTK_ESP(tsk);
-	unsigned long unmapped_base;
+	unsigned long exec_base;
 
 	if (!cpu_has_feature(CPU_FTR_NO_SLBIE_B) &&
 	    offset <= SLB_CACHE_ENTRIES) {
@@ -212,14 +212,13 @@ void switch_slb(struct task_struct *tsk, struct mm_struct *mm)
 
 	/*
 	 * preload some userspace segments into the SLB.
+	 * Almost all 32 and 64bit PowerPC executables are linked at
+	 * 0x10000000 so it makes sense to preload this segment.
 	 */
-	if (test_tsk_thread_flag(tsk, TIF_32BIT))
-		unmapped_base = TASK_UNMAPPED_BASE_USER32;
-	else
-		unmapped_base = TASK_UNMAPPED_BASE_USER64;
+	exec_base = 0x10000000;
 
 	if (is_kernel_addr(pc) || is_kernel_addr(stack) ||
-	    is_kernel_addr(unmapped_base))
+	    is_kernel_addr(exec_base))
 		return;
 
 	slb_allocate(pc);
@@ -227,9 +226,9 @@ void switch_slb(struct task_struct *tsk, struct mm_struct *mm)
 	if (!esids_match(pc, stack))
 		slb_allocate(stack);
 
-	if (!esids_match(pc, unmapped_base) &&
-	    !esids_match(stack, unmapped_base))
-		slb_allocate(unmapped_base);
+	if (!esids_match(pc, exec_base) &&
+	    !esids_match(stack, exec_base))
+		slb_allocate(exec_base);
 }
 
 static inline void patch_slb_encoding(unsigned int *insn_addr,
-- 
cgit v1.2.3


From 8aa34ab8b2dc96ca6c4feecfb87ed13f0d40ef98 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Tue, 14 Jul 2009 20:52:52 +0000
Subject: powerpc: Rename exception.h to exception-64s.h

The file include/asm/exception.h contains definitions
that are specific to exception handling on 64-bit server
type processors.

This renames the file to exception-64s.h to reflect that
fact and avoid confusion.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/exception-64s.h   | 279 +++++++++++++++++++++++++++++
 arch/powerpc/include/asm/exception.h       | 279 -----------------------------
 arch/powerpc/kernel/exceptions-64s.S       |   2 +
 arch/powerpc/kernel/head_64.S              |   1 -
 arch/powerpc/platforms/iseries/exception.h |   2 +-
 5 files changed, 282 insertions(+), 281 deletions(-)
 create mode 100644 arch/powerpc/include/asm/exception-64s.h
 delete mode 100644 arch/powerpc/include/asm/exception.h

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/exception-64s.h b/arch/powerpc/include/asm/exception-64s.h
new file mode 100644
index 00000000000..d3d4534e3c7
--- /dev/null
+++ b/arch/powerpc/include/asm/exception-64s.h
@@ -0,0 +1,279 @@
+#ifndef _ASM_POWERPC_EXCEPTION_H
+#define _ASM_POWERPC_EXCEPTION_H
+/*
+ * Extracted from head_64.S
+ *
+ *  PowerPC version
+ *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ *  Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP
+ *    Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu>
+ *  Adapted for Power Macintosh by Paul Mackerras.
+ *  Low-level exception handlers and MMU support
+ *  rewritten by Paul Mackerras.
+ *    Copyright (C) 1996 Paul Mackerras.
+ *
+ *  Adapted for 64bit PowerPC by Dave Engebretsen, Peter Bergner, and
+ *    Mike Corrigan {engebret|bergner|mikejc}@us.ibm.com
+ *
+ *  This file contains the low-level support and setup for the
+ *  PowerPC-64 platform, including trap and interrupt dispatch.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ */
+/*
+ * The following macros define the code that appears as
+ * the prologue to each of the exception handlers.  They
+ * are split into two parts to allow a single kernel binary
+ * to be used for pSeries and iSeries.
+ *
+ * We make as much of the exception code common between native
+ * exception handlers (including pSeries LPAR) and iSeries LPAR
+ * implementations as possible.
+ */
+
+#define EX_R9		0
+#define EX_R10		8
+#define EX_R11		16
+#define EX_R12		24
+#define EX_R13		32
+#define EX_SRR0		40
+#define EX_DAR		48
+#define EX_DSISR	56
+#define EX_CCR		60
+#define EX_R3		64
+#define EX_LR		72
+
+/*
+ * We're short on space and time in the exception prolog, so we can't
+ * use the normal SET_REG_IMMEDIATE macro. Normally we just need the
+ * low halfword of the address, but for Kdump we need the whole low
+ * word.
+ */
+#define LOAD_HANDLER(reg, label)					\
+	addi	reg,reg,(label)-_stext;	/* virt addr of handler ... */
+
+#define EXCEPTION_PROLOG_1(area)				\
+	mfspr	r13,SPRN_SPRG3;		/* get paca address into r13 */	\
+	std	r9,area+EX_R9(r13);	/* save r9 - r12 */		\
+	std	r10,area+EX_R10(r13);					\
+	std	r11,area+EX_R11(r13);					\
+	std	r12,area+EX_R12(r13);					\
+	mfspr	r9,SPRN_SPRG1;						\
+	std	r9,area+EX_R13(r13);					\
+	mfcr	r9
+
+#define EXCEPTION_PROLOG_PSERIES(area, label)				\
+	EXCEPTION_PROLOG_1(area);					\
+	ld	r12,PACAKBASE(r13);	/* get high part of &label */	\
+	ld	r10,PACAKMSR(r13);	/* get MSR value for kernel */	\
+	mfspr	r11,SPRN_SRR0;		/* save SRR0 */			\
+	LOAD_HANDLER(r12,label)						\
+	mtspr	SPRN_SRR0,r12;						\
+	mfspr	r12,SPRN_SRR1;		/* and SRR1 */			\
+	mtspr	SPRN_SRR1,r10;						\
+	rfid;								\
+	b	.	/* prevent speculative execution */
+
+/*
+ * The common exception prolog is used for all except a few exceptions
+ * such as a segment miss on a kernel address.  We have to be prepared
+ * to take another exception from the point where we first touch the
+ * kernel stack onwards.
+ *
+ * On entry r13 points to the paca, r9-r13 are saved in the paca,
+ * r9 contains the saved CR, r11 and r12 contain the saved SRR0 and
+ * SRR1, and relocation is on.
+ */
+#define EXCEPTION_PROLOG_COMMON(n, area)				   \
+	andi.	r10,r12,MSR_PR;		/* See if coming from user	*/ \
+	mr	r10,r1;			/* Save r1			*/ \
+	subi	r1,r1,INT_FRAME_SIZE;	/* alloc frame on kernel stack	*/ \
+	beq-	1f;							   \
+	ld	r1,PACAKSAVE(r13);	/* kernel stack to use		*/ \
+1:	cmpdi	cr1,r1,0;		/* check if r1 is in userspace	*/ \
+	bge-	cr1,2f;			/* abort if it is		*/ \
+	b	3f;							   \
+2:	li	r1,(n);			/* will be reloaded later	*/ \
+	sth	r1,PACA_TRAP_SAVE(r13);					   \
+	b	bad_stack;						   \
+3:	std	r9,_CCR(r1);		/* save CR in stackframe	*/ \
+	std	r11,_NIP(r1);		/* save SRR0 in stackframe	*/ \
+	std	r12,_MSR(r1);		/* save SRR1 in stackframe	*/ \
+	std	r10,0(r1);		/* make stack chain pointer	*/ \
+	std	r0,GPR0(r1);		/* save r0 in stackframe	*/ \
+	std	r10,GPR1(r1);		/* save r1 in stackframe	*/ \
+	ACCOUNT_CPU_USER_ENTRY(r9, r10);				   \
+	std	r2,GPR2(r1);		/* save r2 in stackframe	*/ \
+	SAVE_4GPRS(3, r1);		/* save r3 - r6 in stackframe	*/ \
+	SAVE_2GPRS(7, r1);		/* save r7, r8 in stackframe	*/ \
+	ld	r9,area+EX_R9(r13);	/* move r9, r10 to stackframe	*/ \
+	ld	r10,area+EX_R10(r13);					   \
+	std	r9,GPR9(r1);						   \
+	std	r10,GPR10(r1);						   \
+	ld	r9,area+EX_R11(r13);	/* move r11 - r13 to stackframe	*/ \
+	ld	r10,area+EX_R12(r13);					   \
+	ld	r11,area+EX_R13(r13);					   \
+	std	r9,GPR11(r1);						   \
+	std	r10,GPR12(r1);						   \
+	std	r11,GPR13(r1);						   \
+	ld	r2,PACATOC(r13);	/* get kernel TOC into r2	*/ \
+	mflr	r9;			/* save LR in stackframe	*/ \
+	std	r9,_LINK(r1);						   \
+	mfctr	r10;			/* save CTR in stackframe	*/ \
+	std	r10,_CTR(r1);						   \
+	lbz	r10,PACASOFTIRQEN(r13);				   \
+	mfspr	r11,SPRN_XER;		/* save XER in stackframe	*/ \
+	std	r10,SOFTE(r1);						   \
+	std	r11,_XER(r1);						   \
+	li	r9,(n)+1;						   \
+	std	r9,_TRAP(r1);		/* set trap number		*/ \
+	li	r10,0;							   \
+	ld	r11,exception_marker@toc(r2);				   \
+	std	r10,RESULT(r1);		/* clear regs->result		*/ \
+	std	r11,STACK_FRAME_OVERHEAD-16(r1); /* mark the frame	*/
+
+/*
+ * Exception vectors.
+ */
+#define STD_EXCEPTION_PSERIES(n, label)			\
+	. = n;						\
+	.globl label##_pSeries;				\
+label##_pSeries:					\
+	HMT_MEDIUM;					\
+	mtspr	SPRN_SPRG1,r13;		/* save r13 */	\
+	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common)
+
+#define HSTD_EXCEPTION_PSERIES(n, label)		\
+	. = n;						\
+	.globl label##_pSeries;				\
+label##_pSeries:					\
+	HMT_MEDIUM;					\
+	mtspr	SPRN_SPRG1,r20;		/* save r20 */	\
+	mfspr	r20,SPRN_HSRR0;		/* copy HSRR0 to SRR0 */ \
+	mtspr	SPRN_SRR0,r20;				\
+	mfspr	r20,SPRN_HSRR1;		/* copy HSRR0 to SRR0 */ \
+	mtspr	SPRN_SRR1,r20;				\
+	mfspr	r20,SPRN_SPRG1;		/* restore r20 */ \
+	mtspr	SPRN_SPRG1,r13;		/* save r13 */	\
+	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common)
+
+
+#define MASKABLE_EXCEPTION_PSERIES(n, label)				\
+	. = n;								\
+	.globl label##_pSeries;						\
+label##_pSeries:							\
+	HMT_MEDIUM;							\
+	mtspr	SPRN_SPRG1,r13;		/* save r13 */			\
+	mfspr	r13,SPRN_SPRG3;		/* get paca address into r13 */	\
+	std	r9,PACA_EXGEN+EX_R9(r13);	/* save r9, r10 */	\
+	std	r10,PACA_EXGEN+EX_R10(r13);				\
+	lbz	r10,PACASOFTIRQEN(r13);					\
+	mfcr	r9;							\
+	cmpwi	r10,0;							\
+	beq	masked_interrupt;					\
+	mfspr	r10,SPRN_SPRG1;						\
+	std	r10,PACA_EXGEN+EX_R13(r13);				\
+	std	r11,PACA_EXGEN+EX_R11(r13);				\
+	std	r12,PACA_EXGEN+EX_R12(r13);				\
+	ld	r12,PACAKBASE(r13);	/* get high part of &label */	\
+	ld	r10,PACAKMSR(r13);	/* get MSR value for kernel */	\
+	mfspr	r11,SPRN_SRR0;		/* save SRR0 */			\
+	LOAD_HANDLER(r12,label##_common)				\
+	mtspr	SPRN_SRR0,r12;						\
+	mfspr	r12,SPRN_SRR1;		/* and SRR1 */			\
+	mtspr	SPRN_SRR1,r10;						\
+	rfid;								\
+	b	.	/* prevent speculative execution */
+
+#ifdef CONFIG_PPC_ISERIES
+#define DISABLE_INTS				\
+	li	r11,0;				\
+	stb	r11,PACASOFTIRQEN(r13);		\
+BEGIN_FW_FTR_SECTION;				\
+	stb	r11,PACAHARDIRQEN(r13);		\
+END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES);	\
+	TRACE_DISABLE_INTS;			\
+BEGIN_FW_FTR_SECTION;				\
+	mfmsr	r10;				\
+	ori	r10,r10,MSR_EE;			\
+	mtmsrd	r10,1;				\
+END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
+#else
+#define DISABLE_INTS				\
+	li	r11,0;				\
+	stb	r11,PACASOFTIRQEN(r13);		\
+	stb	r11,PACAHARDIRQEN(r13);		\
+	TRACE_DISABLE_INTS
+#endif /* CONFIG_PPC_ISERIES */
+
+#define ENABLE_INTS				\
+	ld	r12,_MSR(r1);			\
+	mfmsr	r11;				\
+	rlwimi	r11,r12,0,MSR_EE;		\
+	mtmsrd	r11,1
+
+#define STD_EXCEPTION_COMMON(trap, label, hdlr)		\
+	.align	7;					\
+	.globl label##_common;				\
+label##_common:						\
+	EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN);	\
+	DISABLE_INTS;					\
+	bl	.save_nvgprs;				\
+	addi	r3,r1,STACK_FRAME_OVERHEAD;		\
+	bl	hdlr;					\
+	b	.ret_from_except
+
+/*
+ * Like STD_EXCEPTION_COMMON, but for exceptions that can occur
+ * in the idle task and therefore need the special idle handling.
+ */
+#define STD_EXCEPTION_COMMON_IDLE(trap, label, hdlr)	\
+	.align	7;					\
+	.globl label##_common;				\
+label##_common:						\
+	EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN);	\
+	FINISH_NAP;					\
+	DISABLE_INTS;					\
+	bl	.save_nvgprs;				\
+	addi	r3,r1,STACK_FRAME_OVERHEAD;		\
+	bl	hdlr;					\
+	b	.ret_from_except
+
+#define STD_EXCEPTION_COMMON_LITE(trap, label, hdlr)	\
+	.align	7;					\
+	.globl label##_common;				\
+label##_common:						\
+	EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN);	\
+	FINISH_NAP;					\
+	DISABLE_INTS;					\
+BEGIN_FTR_SECTION					\
+	bl	.ppc64_runlatch_on;			\
+END_FTR_SECTION_IFSET(CPU_FTR_CTRL)			\
+	addi	r3,r1,STACK_FRAME_OVERHEAD;		\
+	bl	hdlr;					\
+	b	.ret_from_except_lite
+
+/*
+ * When the idle code in power4_idle puts the CPU into NAP mode,
+ * it has to do so in a loop, and relies on the external interrupt
+ * and decrementer interrupt entry code to get it out of the loop.
+ * It sets the _TLF_NAPPING bit in current_thread_info()->local_flags
+ * to signal that it is in the loop and needs help to get out.
+ */
+#ifdef CONFIG_PPC_970_NAP
+#define FINISH_NAP				\
+BEGIN_FTR_SECTION				\
+	clrrdi	r11,r1,THREAD_SHIFT;		\
+	ld	r9,TI_LOCAL_FLAGS(r11);		\
+	andi.	r10,r9,_TLF_NAPPING;		\
+	bnel	power4_fixup_nap;		\
+END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP)
+#else
+#define FINISH_NAP
+#endif
+
+#endif	/* _ASM_POWERPC_EXCEPTION_H */
diff --git a/arch/powerpc/include/asm/exception.h b/arch/powerpc/include/asm/exception.h
deleted file mode 100644
index d3d4534e3c7..00000000000
--- a/arch/powerpc/include/asm/exception.h
+++ /dev/null
@@ -1,279 +0,0 @@
-#ifndef _ASM_POWERPC_EXCEPTION_H
-#define _ASM_POWERPC_EXCEPTION_H
-/*
- * Extracted from head_64.S
- *
- *  PowerPC version
- *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- *  Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP
- *    Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu>
- *  Adapted for Power Macintosh by Paul Mackerras.
- *  Low-level exception handlers and MMU support
- *  rewritten by Paul Mackerras.
- *    Copyright (C) 1996 Paul Mackerras.
- *
- *  Adapted for 64bit PowerPC by Dave Engebretsen, Peter Bergner, and
- *    Mike Corrigan {engebret|bergner|mikejc}@us.ibm.com
- *
- *  This file contains the low-level support and setup for the
- *  PowerPC-64 platform, including trap and interrupt dispatch.
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- */
-/*
- * The following macros define the code that appears as
- * the prologue to each of the exception handlers.  They
- * are split into two parts to allow a single kernel binary
- * to be used for pSeries and iSeries.
- *
- * We make as much of the exception code common between native
- * exception handlers (including pSeries LPAR) and iSeries LPAR
- * implementations as possible.
- */
-
-#define EX_R9		0
-#define EX_R10		8
-#define EX_R11		16
-#define EX_R12		24
-#define EX_R13		32
-#define EX_SRR0		40
-#define EX_DAR		48
-#define EX_DSISR	56
-#define EX_CCR		60
-#define EX_R3		64
-#define EX_LR		72
-
-/*
- * We're short on space and time in the exception prolog, so we can't
- * use the normal SET_REG_IMMEDIATE macro. Normally we just need the
- * low halfword of the address, but for Kdump we need the whole low
- * word.
- */
-#define LOAD_HANDLER(reg, label)					\
-	addi	reg,reg,(label)-_stext;	/* virt addr of handler ... */
-
-#define EXCEPTION_PROLOG_1(area)				\
-	mfspr	r13,SPRN_SPRG3;		/* get paca address into r13 */	\
-	std	r9,area+EX_R9(r13);	/* save r9 - r12 */		\
-	std	r10,area+EX_R10(r13);					\
-	std	r11,area+EX_R11(r13);					\
-	std	r12,area+EX_R12(r13);					\
-	mfspr	r9,SPRN_SPRG1;						\
-	std	r9,area+EX_R13(r13);					\
-	mfcr	r9
-
-#define EXCEPTION_PROLOG_PSERIES(area, label)				\
-	EXCEPTION_PROLOG_1(area);					\
-	ld	r12,PACAKBASE(r13);	/* get high part of &label */	\
-	ld	r10,PACAKMSR(r13);	/* get MSR value for kernel */	\
-	mfspr	r11,SPRN_SRR0;		/* save SRR0 */			\
-	LOAD_HANDLER(r12,label)						\
-	mtspr	SPRN_SRR0,r12;						\
-	mfspr	r12,SPRN_SRR1;		/* and SRR1 */			\
-	mtspr	SPRN_SRR1,r10;						\
-	rfid;								\
-	b	.	/* prevent speculative execution */
-
-/*
- * The common exception prolog is used for all except a few exceptions
- * such as a segment miss on a kernel address.  We have to be prepared
- * to take another exception from the point where we first touch the
- * kernel stack onwards.
- *
- * On entry r13 points to the paca, r9-r13 are saved in the paca,
- * r9 contains the saved CR, r11 and r12 contain the saved SRR0 and
- * SRR1, and relocation is on.
- */
-#define EXCEPTION_PROLOG_COMMON(n, area)				   \
-	andi.	r10,r12,MSR_PR;		/* See if coming from user	*/ \
-	mr	r10,r1;			/* Save r1			*/ \
-	subi	r1,r1,INT_FRAME_SIZE;	/* alloc frame on kernel stack	*/ \
-	beq-	1f;							   \
-	ld	r1,PACAKSAVE(r13);	/* kernel stack to use		*/ \
-1:	cmpdi	cr1,r1,0;		/* check if r1 is in userspace	*/ \
-	bge-	cr1,2f;			/* abort if it is		*/ \
-	b	3f;							   \
-2:	li	r1,(n);			/* will be reloaded later	*/ \
-	sth	r1,PACA_TRAP_SAVE(r13);					   \
-	b	bad_stack;						   \
-3:	std	r9,_CCR(r1);		/* save CR in stackframe	*/ \
-	std	r11,_NIP(r1);		/* save SRR0 in stackframe	*/ \
-	std	r12,_MSR(r1);		/* save SRR1 in stackframe	*/ \
-	std	r10,0(r1);		/* make stack chain pointer	*/ \
-	std	r0,GPR0(r1);		/* save r0 in stackframe	*/ \
-	std	r10,GPR1(r1);		/* save r1 in stackframe	*/ \
-	ACCOUNT_CPU_USER_ENTRY(r9, r10);				   \
-	std	r2,GPR2(r1);		/* save r2 in stackframe	*/ \
-	SAVE_4GPRS(3, r1);		/* save r3 - r6 in stackframe	*/ \
-	SAVE_2GPRS(7, r1);		/* save r7, r8 in stackframe	*/ \
-	ld	r9,area+EX_R9(r13);	/* move r9, r10 to stackframe	*/ \
-	ld	r10,area+EX_R10(r13);					   \
-	std	r9,GPR9(r1);						   \
-	std	r10,GPR10(r1);						   \
-	ld	r9,area+EX_R11(r13);	/* move r11 - r13 to stackframe	*/ \
-	ld	r10,area+EX_R12(r13);					   \
-	ld	r11,area+EX_R13(r13);					   \
-	std	r9,GPR11(r1);						   \
-	std	r10,GPR12(r1);						   \
-	std	r11,GPR13(r1);						   \
-	ld	r2,PACATOC(r13);	/* get kernel TOC into r2	*/ \
-	mflr	r9;			/* save LR in stackframe	*/ \
-	std	r9,_LINK(r1);						   \
-	mfctr	r10;			/* save CTR in stackframe	*/ \
-	std	r10,_CTR(r1);						   \
-	lbz	r10,PACASOFTIRQEN(r13);				   \
-	mfspr	r11,SPRN_XER;		/* save XER in stackframe	*/ \
-	std	r10,SOFTE(r1);						   \
-	std	r11,_XER(r1);						   \
-	li	r9,(n)+1;						   \
-	std	r9,_TRAP(r1);		/* set trap number		*/ \
-	li	r10,0;							   \
-	ld	r11,exception_marker@toc(r2);				   \
-	std	r10,RESULT(r1);		/* clear regs->result		*/ \
-	std	r11,STACK_FRAME_OVERHEAD-16(r1); /* mark the frame	*/
-
-/*
- * Exception vectors.
- */
-#define STD_EXCEPTION_PSERIES(n, label)			\
-	. = n;						\
-	.globl label##_pSeries;				\
-label##_pSeries:					\
-	HMT_MEDIUM;					\
-	mtspr	SPRN_SPRG1,r13;		/* save r13 */	\
-	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common)
-
-#define HSTD_EXCEPTION_PSERIES(n, label)		\
-	. = n;						\
-	.globl label##_pSeries;				\
-label##_pSeries:					\
-	HMT_MEDIUM;					\
-	mtspr	SPRN_SPRG1,r20;		/* save r20 */	\
-	mfspr	r20,SPRN_HSRR0;		/* copy HSRR0 to SRR0 */ \
-	mtspr	SPRN_SRR0,r20;				\
-	mfspr	r20,SPRN_HSRR1;		/* copy HSRR0 to SRR0 */ \
-	mtspr	SPRN_SRR1,r20;				\
-	mfspr	r20,SPRN_SPRG1;		/* restore r20 */ \
-	mtspr	SPRN_SPRG1,r13;		/* save r13 */	\
-	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common)
-
-
-#define MASKABLE_EXCEPTION_PSERIES(n, label)				\
-	. = n;								\
-	.globl label##_pSeries;						\
-label##_pSeries:							\
-	HMT_MEDIUM;							\
-	mtspr	SPRN_SPRG1,r13;		/* save r13 */			\
-	mfspr	r13,SPRN_SPRG3;		/* get paca address into r13 */	\
-	std	r9,PACA_EXGEN+EX_R9(r13);	/* save r9, r10 */	\
-	std	r10,PACA_EXGEN+EX_R10(r13);				\
-	lbz	r10,PACASOFTIRQEN(r13);					\
-	mfcr	r9;							\
-	cmpwi	r10,0;							\
-	beq	masked_interrupt;					\
-	mfspr	r10,SPRN_SPRG1;						\
-	std	r10,PACA_EXGEN+EX_R13(r13);				\
-	std	r11,PACA_EXGEN+EX_R11(r13);				\
-	std	r12,PACA_EXGEN+EX_R12(r13);				\
-	ld	r12,PACAKBASE(r13);	/* get high part of &label */	\
-	ld	r10,PACAKMSR(r13);	/* get MSR value for kernel */	\
-	mfspr	r11,SPRN_SRR0;		/* save SRR0 */			\
-	LOAD_HANDLER(r12,label##_common)				\
-	mtspr	SPRN_SRR0,r12;						\
-	mfspr	r12,SPRN_SRR1;		/* and SRR1 */			\
-	mtspr	SPRN_SRR1,r10;						\
-	rfid;								\
-	b	.	/* prevent speculative execution */
-
-#ifdef CONFIG_PPC_ISERIES
-#define DISABLE_INTS				\
-	li	r11,0;				\
-	stb	r11,PACASOFTIRQEN(r13);		\
-BEGIN_FW_FTR_SECTION;				\
-	stb	r11,PACAHARDIRQEN(r13);		\
-END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES);	\
-	TRACE_DISABLE_INTS;			\
-BEGIN_FW_FTR_SECTION;				\
-	mfmsr	r10;				\
-	ori	r10,r10,MSR_EE;			\
-	mtmsrd	r10,1;				\
-END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
-#else
-#define DISABLE_INTS				\
-	li	r11,0;				\
-	stb	r11,PACASOFTIRQEN(r13);		\
-	stb	r11,PACAHARDIRQEN(r13);		\
-	TRACE_DISABLE_INTS
-#endif /* CONFIG_PPC_ISERIES */
-
-#define ENABLE_INTS				\
-	ld	r12,_MSR(r1);			\
-	mfmsr	r11;				\
-	rlwimi	r11,r12,0,MSR_EE;		\
-	mtmsrd	r11,1
-
-#define STD_EXCEPTION_COMMON(trap, label, hdlr)		\
-	.align	7;					\
-	.globl label##_common;				\
-label##_common:						\
-	EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN);	\
-	DISABLE_INTS;					\
-	bl	.save_nvgprs;				\
-	addi	r3,r1,STACK_FRAME_OVERHEAD;		\
-	bl	hdlr;					\
-	b	.ret_from_except
-
-/*
- * Like STD_EXCEPTION_COMMON, but for exceptions that can occur
- * in the idle task and therefore need the special idle handling.
- */
-#define STD_EXCEPTION_COMMON_IDLE(trap, label, hdlr)	\
-	.align	7;					\
-	.globl label##_common;				\
-label##_common:						\
-	EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN);	\
-	FINISH_NAP;					\
-	DISABLE_INTS;					\
-	bl	.save_nvgprs;				\
-	addi	r3,r1,STACK_FRAME_OVERHEAD;		\
-	bl	hdlr;					\
-	b	.ret_from_except
-
-#define STD_EXCEPTION_COMMON_LITE(trap, label, hdlr)	\
-	.align	7;					\
-	.globl label##_common;				\
-label##_common:						\
-	EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN);	\
-	FINISH_NAP;					\
-	DISABLE_INTS;					\
-BEGIN_FTR_SECTION					\
-	bl	.ppc64_runlatch_on;			\
-END_FTR_SECTION_IFSET(CPU_FTR_CTRL)			\
-	addi	r3,r1,STACK_FRAME_OVERHEAD;		\
-	bl	hdlr;					\
-	b	.ret_from_except_lite
-
-/*
- * When the idle code in power4_idle puts the CPU into NAP mode,
- * it has to do so in a loop, and relies on the external interrupt
- * and decrementer interrupt entry code to get it out of the loop.
- * It sets the _TLF_NAPPING bit in current_thread_info()->local_flags
- * to signal that it is in the loop and needs help to get out.
- */
-#ifdef CONFIG_PPC_970_NAP
-#define FINISH_NAP				\
-BEGIN_FTR_SECTION				\
-	clrrdi	r11,r1,THREAD_SHIFT;		\
-	ld	r9,TI_LOCAL_FLAGS(r11);		\
-	andi.	r10,r9,_TLF_NAPPING;		\
-	bnel	power4_fixup_nap;		\
-END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP)
-#else
-#define FINISH_NAP
-#endif
-
-#endif	/* _ASM_POWERPC_EXCEPTION_H */
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index eb898112e57..72644cf22ca 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -12,6 +12,8 @@
  *
  */
 
+#include <asm/exception-64s.h>
+
 /*
  * We layout physical memory as follows:
  * 0x0000 - 0x00ff : Secondary processor spin code
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index 012505ebd9f..9196ef36d43 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -36,7 +36,6 @@
 #include <asm/thread_info.h>
 #include <asm/firmware.h>
 #include <asm/page_64.h>
-#include <asm/exception.h>
 #include <asm/irqflags.h>
 
 /* The physical memory is layed out such that the secondary processor
diff --git a/arch/powerpc/platforms/iseries/exception.h b/arch/powerpc/platforms/iseries/exception.h
index ced45a8fa1a..e26eb86ac73 100644
--- a/arch/powerpc/platforms/iseries/exception.h
+++ b/arch/powerpc/platforms/iseries/exception.h
@@ -24,7 +24,7 @@
  *  as published by the Free Software Foundation; either version
  *  2 of the License, or (at your option) any later version.
  */
-#include <asm/exception.h>
+#include <asm/exception-64s.h>
 
 #define EXCEPTION_PROLOG_ISERIES_1					\
 	mfmsr	r10;							\
-- 
cgit v1.2.3


From ee43eb788b3a06425fffb912677e2e1c8b00dd3b Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Tue, 14 Jul 2009 20:52:54 +0000
Subject: powerpc: Use names rather than numbers for SPRGs (v2)

The kernel uses SPRG registers for various purposes, typically in
low level assembly code as scratch registers or to hold per-cpu
global infos such as the PACA or the current thread_info pointer.

We want to be able to easily shuffle the usage of those registers
as some implementations have specific constraints realted to some
of them, for example, some have userspace readable aliases, etc..
and the current choice isn't always the best.

This patch should not change any code generation, and replaces the
usage of SPRN_SPRGn everywhere in the kernel with a named replacement
and adds documentation next to the definition of the names as to
what those are used for on each processor family.

The only parts that still use the original numbers are bits of KVM
or suspend/resume code that just blindly needs to save/restore all
the SPRGs.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/exception-64s.h   |  18 ++---
 arch/powerpc/include/asm/reg.h             | 113 ++++++++++++++++++++++++++
 arch/powerpc/kernel/cpu_setup_6xx.S        |   2 +-
 arch/powerpc/kernel/entry_32.S             |  20 ++---
 arch/powerpc/kernel/entry_64.S             |   4 +-
 arch/powerpc/kernel/exceptions-64s.S       |  44 ++++------
 arch/powerpc/kernel/fpu.S                  |   2 +-
 arch/powerpc/kernel/head_32.S              |  40 +++++-----
 arch/powerpc/kernel/head_40x.S             | 124 ++++++++++++++---------------
 arch/powerpc/kernel/head_44x.S             |  56 ++++++-------
 arch/powerpc/kernel/head_64.S              |  14 ++--
 arch/powerpc/kernel/head_8xx.S             |  13 +--
 arch/powerpc/kernel/head_booke.h           |  50 +++++-------
 arch/powerpc/kernel/head_fsl_booke.S       |  60 +++++++-------
 arch/powerpc/kernel/setup_64.c             |   4 +-
 arch/powerpc/kernel/vector.S               |   2 +-
 arch/powerpc/kvm/booke_interrupts.S        |  18 ++---
 arch/powerpc/mm/hash_low_32.S              |   4 +-
 arch/powerpc/platforms/iseries/exception.S |  28 +++----
 arch/powerpc/platforms/iseries/exception.h |   4 +-
 20 files changed, 356 insertions(+), 264 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/exception-64s.h b/arch/powerpc/include/asm/exception-64s.h
index d3d4534e3c7..773e380b5fe 100644
--- a/arch/powerpc/include/asm/exception-64s.h
+++ b/arch/powerpc/include/asm/exception-64s.h
@@ -57,12 +57,12 @@
 	addi	reg,reg,(label)-_stext;	/* virt addr of handler ... */
 
 #define EXCEPTION_PROLOG_1(area)				\
-	mfspr	r13,SPRN_SPRG3;		/* get paca address into r13 */	\
+	mfspr	r13,SPRN_SPRG_PACA;	/* get paca address into r13 */	\
 	std	r9,area+EX_R9(r13);	/* save r9 - r12 */		\
 	std	r10,area+EX_R10(r13);					\
 	std	r11,area+EX_R11(r13);					\
 	std	r12,area+EX_R12(r13);					\
-	mfspr	r9,SPRN_SPRG1;						\
+	mfspr	r9,SPRN_SPRG_SCRATCH0;					\
 	std	r9,area+EX_R13(r13);					\
 	mfcr	r9
 
@@ -144,7 +144,7 @@
 	.globl label##_pSeries;				\
 label##_pSeries:					\
 	HMT_MEDIUM;					\
-	mtspr	SPRN_SPRG1,r13;		/* save r13 */	\
+	mtspr	SPRN_SPRG_SCRATCH0,r13;		/* save r13 */	\
 	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common)
 
 #define HSTD_EXCEPTION_PSERIES(n, label)		\
@@ -152,13 +152,13 @@ label##_pSeries:					\
 	.globl label##_pSeries;				\
 label##_pSeries:					\
 	HMT_MEDIUM;					\
-	mtspr	SPRN_SPRG1,r20;		/* save r20 */	\
+	mtspr	SPRN_SPRG_SCRATCH0,r20;	/* save r20 */	\
 	mfspr	r20,SPRN_HSRR0;		/* copy HSRR0 to SRR0 */ \
 	mtspr	SPRN_SRR0,r20;				\
 	mfspr	r20,SPRN_HSRR1;		/* copy HSRR0 to SRR0 */ \
 	mtspr	SPRN_SRR1,r20;				\
-	mfspr	r20,SPRN_SPRG1;		/* restore r20 */ \
-	mtspr	SPRN_SPRG1,r13;		/* save r13 */	\
+	mfspr	r20,SPRN_SPRG_SCRATCH0;	/* restore r20 */ \
+	mtspr	SPRN_SPRG_SCRATCH0,r13;		/* save r13 */	\
 	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common)
 
 
@@ -167,15 +167,15 @@ label##_pSeries:					\
 	.globl label##_pSeries;						\
 label##_pSeries:							\
 	HMT_MEDIUM;							\
-	mtspr	SPRN_SPRG1,r13;		/* save r13 */			\
-	mfspr	r13,SPRN_SPRG3;		/* get paca address into r13 */	\
+	mtspr	SPRN_SPRG_SCRATCH0,r13;	/* save r13 */			\
+	mfspr	r13,SPRN_SPRG_PACA;	/* get paca address into r13 */	\
 	std	r9,PACA_EXGEN+EX_R9(r13);	/* save r9, r10 */	\
 	std	r10,PACA_EXGEN+EX_R10(r13);				\
 	lbz	r10,PACASOFTIRQEN(r13);					\
 	mfcr	r9;							\
 	cmpwi	r10,0;							\
 	beq	masked_interrupt;					\
-	mfspr	r10,SPRN_SPRG1;						\
+	mfspr	r10,SPRN_SPRG_SCRATCH0;					\
 	std	r10,PACA_EXGEN+EX_R13(r13);				\
 	std	r11,PACA_EXGEN+EX_R11(r13);				\
 	std	r12,PACA_EXGEN+EX_R12(r13);				\
diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index 1170267736d..a8179cc99ac 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -645,6 +645,119 @@
 #define MMCR0_PMC2_LOADMISSTIME	0x5
 #endif
 
+/*
+ * SPRG usage:
+ *
+ * All 64-bit:
+ *	- SPRG3 stores PACA pointer
+ *
+ * 64-bit server:
+ *	- SPRG0 unused (reserved for HV on Power4)
+ *	- SPRG1 scratch for exception vectors
+ *	- SPRG2 scratch for exception vectors
+ *
+ * All 32-bit:
+ *	- SPRG3 current thread_info pointer
+ *        (virtual on BookE, physical on others)
+ *
+ * 32-bit classic:
+ *	- SPRG0 scratch for exception vectors
+ *	- SPRG1 scratch for exception vectors
+ *	- SPRG2 indicator that we are in RTAS
+ *	- SPRG4 (603 only) pseudo TLB LRU data
+ *
+ * 32-bit 40x:
+ *	- SPRG0 scratch for exception vectors
+ *	- SPRG1 scratch for exception vectors
+ *	- SPRG2 scratch for exception vectors
+ *	- SPRG4 scratch for exception vectors (not 403)
+ *	- SPRG5 scratch for exception vectors (not 403)
+ *	- SPRG6 scratch for exception vectors (not 403)
+ *	- SPRG7 scratch for exception vectors (not 403)
+ *
+ * 32-bit 440 and FSL BookE:
+ *	- SPRG0 scratch for exception vectors
+ *	- SPRG1 scratch for exception vectors (*)
+ *	- SPRG2 scratch for crit interrupts handler
+ *	- SPRG4 scratch for exception vectors
+ *	- SPRG5 scratch for exception vectors
+ *	- SPRG6 scratch for machine check handler
+ *	- SPRG7 scratch for exception vectors
+ *	- SPRG9 scratch for debug vectors (e500 only)
+ *
+ *      Additionally, BookE separates "read" and "write"
+ *      of those registers. That allows to use the userspace
+ *      readable variant for reads, which can avoid a fault
+ *      with KVM type virtualization.
+ *
+ *      (*) Under KVM, the host SPRG1 is used to point to
+ *      the current VCPU data structure
+ *
+ * 32-bit 8xx:
+ *	- SPRG0 scratch for exception vectors
+ *	- SPRG1 scratch for exception vectors
+ *	- SPRG2 apparently unused but initialized
+ *
+ */
+#ifdef CONFIG_PPC64
+#define SPRN_SPRG_PACA 		SPRN_SPRG3
+#else
+#define SPRN_SPRG_THREAD 	SPRN_SPRG3
+#endif
+
+#ifdef CONFIG_PPC_BOOK3S_64
+#define SPRN_SPRG_SCRATCH0	SPRN_SPRG1
+#define SPRN_SPRG_SCRATCH1	SPRN_SPRG2
+#endif
+
+#ifdef CONFIG_PPC_BOOK3S_32
+#define SPRN_SPRG_SCRATCH0	SPRN_SPRG0
+#define SPRN_SPRG_SCRATCH1	SPRN_SPRG1
+#define SPRN_SPRG_RTAS		SPRN_SPRG2
+#define SPRN_SPRG_603_LRU	SPRN_SPRG4
+#endif
+
+#ifdef CONFIG_40x
+#define SPRN_SPRG_SCRATCH0	SPRN_SPRG0
+#define SPRN_SPRG_SCRATCH1	SPRN_SPRG1
+#define SPRN_SPRG_SCRATCH2	SPRN_SPRG2
+#define SPRN_SPRG_SCRATCH3	SPRN_SPRG4
+#define SPRN_SPRG_SCRATCH4	SPRN_SPRG5
+#define SPRN_SPRG_SCRATCH5	SPRN_SPRG6
+#define SPRN_SPRG_SCRATCH6	SPRN_SPRG7
+#endif
+
+#ifdef CONFIG_BOOKE
+#define SPRN_SPRG_RSCRATCH0	SPRN_SPRG0
+#define SPRN_SPRG_WSCRATCH0	SPRN_SPRG0
+#define SPRN_SPRG_RSCRATCH1	SPRN_SPRG1
+#define SPRN_SPRG_WSCRATCH1	SPRN_SPRG1
+#define SPRN_SPRG_RSCRATCH_CRIT	SPRN_SPRG2
+#define SPRN_SPRG_WSCRATCH_CRIT	SPRN_SPRG2
+#define SPRN_SPRG_RSCRATCH2	SPRN_SPRG4R
+#define SPRN_SPRG_WSCRATCH2	SPRN_SPRG4W
+#define SPRN_SPRG_RSCRATCH3	SPRN_SPRG5R
+#define SPRN_SPRG_WSCRATCH3	SPRN_SPRG5W
+#define SPRN_SPRG_RSCRATCH_MC	SPRN_SPRG6R
+#define SPRN_SPRG_WSCRATCH_MC	SPRN_SPRG6W
+#define SPRN_SPRG_RSCRATCH4	SPRN_SPRG7R
+#define SPRN_SPRG_WSCRATCH4	SPRN_SPRG7W
+#ifdef CONFIG_E200
+#define SPRN_SPRG_RSCRATCH_DBG	SPRN_SPRG6R
+#define SPRN_SPRG_WSCRATCH_DBG	SPRN_SPRG6W
+#else
+#define SPRN_SPRG_RSCRATCH_DBG	SPRN_SPRG9
+#define SPRN_SPRG_WSCRATCH_DBG	SPRN_SPRG9
+#endif
+#define SPRN_SPRG_RVCPU		SPRN_SPRG1
+#define SPRN_SPRG_WVCPU		SPRN_SPRG1
+#endif
+
+#ifdef CONFIG_8xx
+#define SPRN_SPRG_SCRATCH0	SPRN_SPRG0
+#define SPRN_SPRG_SCRATCH1	SPRN_SPRG1
+#endif
+
 /*
  * An mtfsf instruction with the L bit set. On CPUs that support this a
  * full 64bits of FPSCR is restored and on other CPUs the L bit is ignored.
diff --git a/arch/powerpc/kernel/cpu_setup_6xx.S b/arch/powerpc/kernel/cpu_setup_6xx.S
index 1e9949e6885..55cba4a8a95 100644
--- a/arch/powerpc/kernel/cpu_setup_6xx.S
+++ b/arch/powerpc/kernel/cpu_setup_6xx.S
@@ -21,7 +21,7 @@ _GLOBAL(__setup_cpu_603)
 	mflr	r4
 BEGIN_MMU_FTR_SECTION
 	li	r10,0
-	mtspr	SPRN_SPRG4,r10		/* init SW LRU tracking */
+	mtspr	SPRN_SPRG_603_LRU,r10		/* init SW LRU tracking */
 END_MMU_FTR_SECTION_IFSET(MMU_FTR_NEED_DTLB_SW_LRU)
 BEGIN_FTR_SECTION
 	bl	__init_fpu_registers
diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index 3cadba60a4b..1175a8539e6 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -88,7 +88,7 @@ crit_transfer_to_handler:
 	mfspr	r0,SPRN_SRR1
 	stw	r0,_SRR1(r11)
 
-	mfspr	r8,SPRN_SPRG3
+	mfspr	r8,SPRN_SPRG_THREAD
 	lwz	r0,KSP_LIMIT(r8)
 	stw	r0,SAVED_KSP_LIMIT(r11)
 	rlwimi	r0,r1,0,0,(31-THREAD_SHIFT)
@@ -108,7 +108,7 @@ crit_transfer_to_handler:
 	mfspr	r0,SPRN_SRR1
 	stw	r0,crit_srr1@l(0)
 
-	mfspr	r8,SPRN_SPRG3
+	mfspr	r8,SPRN_SPRG_THREAD
 	lwz	r0,KSP_LIMIT(r8)
 	stw	r0,saved_ksp_limit@l(0)
 	rlwimi	r0,r1,0,0,(31-THREAD_SHIFT)
@@ -138,7 +138,7 @@ transfer_to_handler:
 	mfspr	r2,SPRN_XER
 	stw	r12,_CTR(r11)
 	stw	r2,_XER(r11)
-	mfspr	r12,SPRN_SPRG3
+	mfspr	r12,SPRN_SPRG_THREAD
 	addi	r2,r12,-THREAD
 	tovirt(r2,r2)			/* set r2 to current */
 	beq	2f			/* if from user, fix up THREAD.regs */
@@ -680,7 +680,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_SPE)
 
 	tophys(r0,r4)
 	CLR_TOP32(r0)
-	mtspr	SPRN_SPRG3,r0	/* Update current THREAD phys addr */
+	mtspr	SPRN_SPRG_THREAD,r0	/* Update current THREAD phys addr */
 	lwz	r1,KSP(r4)	/* Load new stack pointer */
 
 	/* save the old current 'last' for return value */
@@ -1057,7 +1057,7 @@ exc_exit_restart_end:
 #ifdef CONFIG_40x
 	.globl	ret_from_crit_exc
 ret_from_crit_exc:
-	mfspr	r9,SPRN_SPRG3
+	mfspr	r9,SPRN_SPRG_THREAD
 	lis	r10,saved_ksp_limit@ha;
 	lwz	r10,saved_ksp_limit@l(r10);
 	tovirt(r9,r9);
@@ -1074,7 +1074,7 @@ ret_from_crit_exc:
 #ifdef CONFIG_BOOKE
 	.globl	ret_from_crit_exc
 ret_from_crit_exc:
-	mfspr	r9,SPRN_SPRG3
+	mfspr	r9,SPRN_SPRG_THREAD
 	lwz	r10,SAVED_KSP_LIMIT(r1)
 	stw	r10,KSP_LIMIT(r9)
 	RESTORE_xSRR(SRR0,SRR1);
@@ -1083,7 +1083,7 @@ ret_from_crit_exc:
 
 	.globl	ret_from_debug_exc
 ret_from_debug_exc:
-	mfspr	r9,SPRN_SPRG3
+	mfspr	r9,SPRN_SPRG_THREAD
 	lwz	r10,SAVED_KSP_LIMIT(r1)
 	stw	r10,KSP_LIMIT(r9)
 	lwz	r9,THREAD_INFO-THREAD(r9)
@@ -1097,7 +1097,7 @@ ret_from_debug_exc:
 
 	.globl	ret_from_mcheck_exc
 ret_from_mcheck_exc:
-	mfspr	r9,SPRN_SPRG3
+	mfspr	r9,SPRN_SPRG_THREAD
 	lwz	r10,SAVED_KSP_LIMIT(r1)
 	stw	r10,KSP_LIMIT(r9)
 	RESTORE_xSRR(SRR0,SRR1);
@@ -1255,7 +1255,7 @@ _GLOBAL(enter_rtas)
 	MTMSRD(r0)		/* don't get trashed */
 	li	r9,MSR_KERNEL & ~(MSR_IR|MSR_DR)
 	mtlr	r6
-	mtspr	SPRN_SPRG2,r7
+	mtspr	SPRN_SPRG_RTAS,r7
 	mtspr	SPRN_SRR0,r8
 	mtspr	SPRN_SRR1,r9
 	RFI
@@ -1265,7 +1265,7 @@ _GLOBAL(enter_rtas)
 	FIX_SRR1(r9,r0)
 	addi	r1,r1,INT_FRAME_SIZE
 	li	r0,0
-	mtspr	SPRN_SPRG2,r0
+	mtspr	SPRN_SPRG_RTAS,r0
 	mtspr	SPRN_SRR0,r8
 	mtspr	SPRN_SRR1,r9
 	RFI			/* return to caller */
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index 43e073477c3..dbf0e311561 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -762,7 +762,7 @@ _GLOBAL(enter_rtas)
 
 _STATIC(rtas_return_loc)
 	/* relocation is off at this point */
-	mfspr	r4,SPRN_SPRG3	        /* Get PACA */
+	mfspr	r4,SPRN_SPRG_PACA	/* Get PACA */
 	clrldi	r4,r4,2			/* convert to realmode address */
 
 	bcl	20,31,$+4
@@ -793,7 +793,7 @@ _STATIC(rtas_restore_regs)
 	REST_8GPRS(14, r1)		/* Restore the non-volatiles */
 	REST_10GPRS(22, r1)		/* ditto */
 
-	mfspr	r13,SPRN_SPRG3
+	mfspr	r13,SPRN_SPRG_PACA
 
 	ld	r4,_CCR(r1)
 	mtcr	r4
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 72644cf22ca..4e9640cc056 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -24,18 +24,6 @@
  * 0x8000 -        : Early init and support code
  */
 
-
-/*
- *   SPRG Usage
- *
- *   Register	Definition
- *
- *   SPRG0	reserved for hypervisor
- *   SPRG1	temp - used to save gpr
- *   SPRG2	temp - used to save gpr
- *   SPRG3	virt addr of paca
- */
-
 /*
  * This is the start of the interrupt handlers for pSeries
  * This code runs with relocation off.
@@ -53,16 +41,16 @@ __start_interrupts:
 	. = 0x200
 _machine_check_pSeries:
 	HMT_MEDIUM
-	mtspr	SPRN_SPRG1,r13		/* save r13 */
+	mtspr	SPRN_SPRG_SCRATCH0,r13		/* save r13 */
 	EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common)
 
 	. = 0x300
 	.globl data_access_pSeries
 data_access_pSeries:
 	HMT_MEDIUM
-	mtspr	SPRN_SPRG1,r13
+	mtspr	SPRN_SPRG_SCRATCH0,r13
 BEGIN_FTR_SECTION
-	mtspr	SPRN_SPRG2,r12
+	mtspr	SPRN_SPRG_SCRATCH1,r12
 	mfspr	r13,SPRN_DAR
 	mfspr	r12,SPRN_DSISR
 	srdi	r13,r13,60
@@ -71,7 +59,7 @@ BEGIN_FTR_SECTION
 	cmpwi	r13,0x2c
 	beq	do_stab_bolted_pSeries
 	mtcrf	0x80,r12
-	mfspr	r12,SPRN_SPRG2
+	mfspr	r12,SPRN_SPRG_SCRATCH1
 END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
 	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, data_access_common)
 
@@ -79,8 +67,8 @@ END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
 	.globl data_access_slb_pSeries
 data_access_slb_pSeries:
 	HMT_MEDIUM
-	mtspr	SPRN_SPRG1,r13
-	mfspr	r13,SPRN_SPRG3		/* get paca address into r13 */
+	mtspr	SPRN_SPRG_SCRATCH0,r13
+	mfspr	r13,SPRN_SPRG_PACA		/* get paca address into r13 */
 	std	r3,PACA_EXSLB+EX_R3(r13)
 	mfspr	r3,SPRN_DAR
 	std	r9,PACA_EXSLB+EX_R9(r13)	/* save r9 - r12 */
@@ -93,7 +81,7 @@ data_access_slb_pSeries:
 	std	r10,PACA_EXSLB+EX_R10(r13)
 	std	r11,PACA_EXSLB+EX_R11(r13)
 	std	r12,PACA_EXSLB+EX_R12(r13)
-	mfspr	r10,SPRN_SPRG1
+	mfspr	r10,SPRN_SPRG_SCRATCH0
 	std	r10,PACA_EXSLB+EX_R13(r13)
 	mfspr	r12,SPRN_SRR1		/* and SRR1 */
 #ifndef CONFIG_RELOCATABLE
@@ -117,8 +105,8 @@ data_access_slb_pSeries:
 	.globl instruction_access_slb_pSeries
 instruction_access_slb_pSeries:
 	HMT_MEDIUM
-	mtspr	SPRN_SPRG1,r13
-	mfspr	r13,SPRN_SPRG3		/* get paca address into r13 */
+	mtspr	SPRN_SPRG_SCRATCH0,r13
+	mfspr	r13,SPRN_SPRG_PACA		/* get paca address into r13 */
 	std	r3,PACA_EXSLB+EX_R3(r13)
 	mfspr	r3,SPRN_SRR0		/* SRR0 is faulting address */
 	std	r9,PACA_EXSLB+EX_R9(r13)	/* save r9 - r12 */
@@ -131,7 +119,7 @@ instruction_access_slb_pSeries:
 	std	r10,PACA_EXSLB+EX_R10(r13)
 	std	r11,PACA_EXSLB+EX_R11(r13)
 	std	r12,PACA_EXSLB+EX_R12(r13)
-	mfspr	r10,SPRN_SPRG1
+	mfspr	r10,SPRN_SPRG_SCRATCH0
 	std	r10,PACA_EXSLB+EX_R13(r13)
 	mfspr	r12,SPRN_SRR1		/* and SRR1 */
 #ifndef CONFIG_RELOCATABLE
@@ -161,7 +149,7 @@ BEGIN_FTR_SECTION
 	beq-	1f
 END_FTR_SECTION_IFSET(CPU_FTR_REAL_LE)
 	mr	r9,r13
-	mfspr	r13,SPRN_SPRG3
+	mfspr	r13,SPRN_SPRG_PACA
 	mfspr	r11,SPRN_SRR0
 	ld	r12,PACAKBASE(r13)
 	ld	r10,PACAKMSR(r13)
@@ -230,14 +218,14 @@ masked_interrupt:
 	rotldi	r10,r10,16
 	mtspr	SPRN_SRR1,r10
 	ld	r10,PACA_EXGEN+EX_R10(r13)
-	mfspr	r13,SPRN_SPRG1
+	mfspr	r13,SPRN_SPRG_SCRATCH0
 	rfid
 	b	.
 
 	.align	7
 do_stab_bolted_pSeries:
 	mtcrf	0x80,r12
-	mfspr	r12,SPRN_SPRG2
+	mfspr	r12,SPRN_SPRG_SCRATCH1
 	EXCEPTION_PROLOG_PSERIES(PACA_EXSLB, .do_stab_bolted)
 
 #ifdef CONFIG_PPC_PSERIES
@@ -248,14 +236,14 @@ do_stab_bolted_pSeries:
       .align 7
 system_reset_fwnmi:
 	HMT_MEDIUM
-	mtspr	SPRN_SPRG1,r13		/* save r13 */
+	mtspr	SPRN_SPRG_SCRATCH0,r13		/* save r13 */
 	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, system_reset_common)
 
 	.globl machine_check_fwnmi
       .align 7
 machine_check_fwnmi:
 	HMT_MEDIUM
-	mtspr	SPRN_SPRG1,r13		/* save r13 */
+	mtspr	SPRN_SPRG_SCRATCH0,r13		/* save r13 */
 	EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common)
 
 #endif /* CONFIG_PPC_PSERIES */
@@ -270,7 +258,7 @@ slb_miss_user_pseries:
 	std	r10,PACA_EXGEN+EX_R10(r13)
 	std	r11,PACA_EXGEN+EX_R11(r13)
 	std	r12,PACA_EXGEN+EX_R12(r13)
-	mfspr	r10,SPRG1
+	mfspr	r10,SPRG_SCRATCH0
 	ld	r11,PACA_EXSLB+EX_R9(r13)
 	ld	r12,PACA_EXSLB+EX_R3(r13)
 	std	r10,PACA_EXGEN+EX_R13(r13)
diff --git a/arch/powerpc/kernel/fpu.S b/arch/powerpc/kernel/fpu.S
index 2436df33c6f..fc8f5b14019 100644
--- a/arch/powerpc/kernel/fpu.S
+++ b/arch/powerpc/kernel/fpu.S
@@ -91,7 +91,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_VSX)
 #endif /* CONFIG_SMP */
 	/* enable use of FP after return */
 #ifdef CONFIG_PPC32
-	mfspr	r5,SPRN_SPRG3		/* current task's THREAD (phys) */
+	mfspr	r5,SPRN_SPRG_THREAD		/* current task's THREAD (phys) */
 	lwz	r4,THREAD_FPEXC_MODE(r5)
 	ori	r9,r9,MSR_FP		/* enable FP for current */
 	or	r9,r9,r4
diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S
index fc213294275..829c3fe7c5a 100644
--- a/arch/powerpc/kernel/head_32.S
+++ b/arch/powerpc/kernel/head_32.S
@@ -244,8 +244,8 @@ __secondary_hold_acknowledge:
  * task's thread_struct.
  */
 #define EXCEPTION_PROLOG	\
-	mtspr	SPRN_SPRG0,r10;	\
-	mtspr	SPRN_SPRG1,r11;	\
+	mtspr	SPRN_SPRG_SCRATCH0,r10;	\
+	mtspr	SPRN_SPRG_SCRATCH1,r11;	\
 	mfcr	r10;		\
 	EXCEPTION_PROLOG_1;	\
 	EXCEPTION_PROLOG_2
@@ -255,7 +255,7 @@ __secondary_hold_acknowledge:
 	andi.	r11,r11,MSR_PR;	\
 	tophys(r11,r1);			/* use tophys(r1) if kernel */ \
 	beq	1f;		\
-	mfspr	r11,SPRN_SPRG3;	\
+	mfspr	r11,SPRN_SPRG_THREAD;	\
 	lwz	r11,THREAD_INFO-THREAD(r11);	\
 	addi	r11,r11,THREAD_SIZE;	\
 	tophys(r11,r11);	\
@@ -267,9 +267,9 @@ __secondary_hold_acknowledge:
 	stw	r10,_CCR(r11);		/* save registers */ \
 	stw	r12,GPR12(r11);	\
 	stw	r9,GPR9(r11);	\
-	mfspr	r10,SPRN_SPRG0;	\
+	mfspr	r10,SPRN_SPRG_SCRATCH0;	\
 	stw	r10,GPR10(r11);	\
-	mfspr	r12,SPRN_SPRG1;	\
+	mfspr	r12,SPRN_SPRG_SCRATCH1;	\
 	stw	r12,GPR11(r11);	\
 	mflr	r10;		\
 	stw	r10,_LINK(r11);	\
@@ -355,11 +355,11 @@ i##n:								\
  *	-- paulus.
  */
 	. = 0x200
-	mtspr	SPRN_SPRG0,r10
-	mtspr	SPRN_SPRG1,r11
+	mtspr	SPRN_SPRG_SCRATCH0,r10
+	mtspr	SPRN_SPRG_SCRATCH1,r11
 	mfcr	r10
 #ifdef CONFIG_PPC_CHRP
-	mfspr	r11,SPRN_SPRG2
+	mfspr	r11,SPRN_SPRG_RTAS
 	cmpwi	0,r11,0
 	bne	7f
 #endif /* CONFIG_PPC_CHRP */
@@ -367,7 +367,7 @@ i##n:								\
 7:	EXCEPTION_PROLOG_2
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 #ifdef CONFIG_PPC_CHRP
-	mfspr	r4,SPRN_SPRG2
+	mfspr	r4,SPRN_SPRG_RTAS
 	cmpwi	cr1,r4,0
 	bne	cr1,1f
 #endif
@@ -485,7 +485,7 @@ InstructionTLBMiss:
 	mfspr	r3,SPRN_IMISS
 	lis	r1,PAGE_OFFSET@h		/* check if kernel address */
 	cmplw	0,r1,r3
-	mfspr	r2,SPRN_SPRG3
+	mfspr	r2,SPRN_SPRG_THREAD
 	li	r1,_PAGE_USER|_PAGE_PRESENT /* low addresses tested as user */
 	lwz	r2,PGDIR(r2)
 	bge-	112f
@@ -559,7 +559,7 @@ DataLoadTLBMiss:
 	mfspr	r3,SPRN_DMISS
 	lis	r1,PAGE_OFFSET@h		/* check if kernel address */
 	cmplw	0,r1,r3
-	mfspr	r2,SPRN_SPRG3
+	mfspr	r2,SPRN_SPRG_THREAD
 	li	r1,_PAGE_USER|_PAGE_PRESENT /* low addresses tested as user */
 	lwz	r2,PGDIR(r2)
 	bge-	112f
@@ -598,12 +598,12 @@ END_FTR_SECTION_IFCLR(CPU_FTR_NEED_COHERENT)
 	mtcrf	0x80,r2
 BEGIN_MMU_FTR_SECTION
 	li	r0,1
-	mfspr	r1,SPRN_SPRG4
+	mfspr	r1,SPRN_SPRG_603_LRU
 	rlwinm	r2,r3,20,27,31		/* Get Address bits 15:19 */
 	slw	r0,r0,r2
 	xor	r1,r0,r1
 	srw	r0,r1,r2
-	mtspr   SPRN_SPRG4,r1
+	mtspr   SPRN_SPRG_603_LRU,r1
 	mfspr	r2,SPRN_SRR1
 	rlwimi	r2,r0,31-14,14,14
 	mtspr   SPRN_SRR1,r2
@@ -643,7 +643,7 @@ DataStoreTLBMiss:
 	mfspr	r3,SPRN_DMISS
 	lis	r1,PAGE_OFFSET@h		/* check if kernel address */
 	cmplw	0,r1,r3
-	mfspr	r2,SPRN_SPRG3
+	mfspr	r2,SPRN_SPRG_THREAD
 	li	r1,_PAGE_RW|_PAGE_USER|_PAGE_PRESENT /* access flags */
 	lwz	r2,PGDIR(r2)
 	bge-	112f
@@ -678,12 +678,12 @@ END_FTR_SECTION_IFCLR(CPU_FTR_NEED_COHERENT)
 	mtcrf	0x80,r2
 BEGIN_MMU_FTR_SECTION
 	li	r0,1
-	mfspr	r1,SPRN_SPRG4
+	mfspr	r1,SPRN_SPRG_603_LRU
 	rlwinm	r2,r3,20,27,31		/* Get Address bits 15:19 */
 	slw	r0,r0,r2
 	xor	r1,r0,r1
 	srw	r0,r1,r2
-	mtspr   SPRN_SPRG4,r1
+	mtspr   SPRN_SPRG_603_LRU,r1
 	mfspr	r2,SPRN_SRR1
 	rlwimi	r2,r0,31-14,14,14
 	mtspr   SPRN_SRR1,r2
@@ -864,9 +864,9 @@ __secondary_start:
 	tophys(r4,r2)
 	addi	r4,r4,THREAD	/* phys address of our thread_struct */
 	CLR_TOP32(r4)
-	mtspr	SPRN_SPRG3,r4
+	mtspr	SPRN_SPRG_THREAD,r4
 	li	r3,0
-	mtspr	SPRN_SPRG2,r3	/* 0 => not in RTAS */
+	mtspr	SPRN_SPRG_RTAS,r3	/* 0 => not in RTAS */
 
 	/* enable MMU and jump to start_secondary */
 	li	r4,MSR_KERNEL
@@ -947,9 +947,9 @@ start_here:
 	tophys(r4,r2)
 	addi	r4,r4,THREAD	/* init task's THREAD */
 	CLR_TOP32(r4)
-	mtspr	SPRN_SPRG3,r4
+	mtspr	SPRN_SPRG_THREAD,r4
 	li	r3,0
-	mtspr	SPRN_SPRG2,r3	/* 0 => not in RTAS */
+	mtspr	SPRN_SPRG_RTAS,r3	/* 0 => not in RTAS */
 
 	/* stack */
 	lis	r1,init_thread_union@ha
diff --git a/arch/powerpc/kernel/head_40x.S b/arch/powerpc/kernel/head_40x.S
index 0c96911d429..a90625f9b48 100644
--- a/arch/powerpc/kernel/head_40x.S
+++ b/arch/powerpc/kernel/head_40x.S
@@ -103,21 +103,21 @@ _ENTRY(saved_ksp_limit)
 
 /*
  * Exception vector entry code. This code runs with address translation
- * turned off (i.e. using physical addresses). We assume SPRG3 has the
- * physical address of the current task thread_struct.
+ * turned off (i.e. using physical addresses). We assume SPRG_THREAD has
+ * the physical address of the current task thread_struct.
  * Note that we have to have decremented r1 before we write to any fields
  * of the exception frame, since a critical interrupt could occur at any
  * time, and it will write to the area immediately below the current r1.
  */
 #define NORMAL_EXCEPTION_PROLOG						     \
-	mtspr	SPRN_SPRG0,r10;		/* save two registers to work with */\
-	mtspr	SPRN_SPRG1,r11;						     \
-	mtspr	SPRN_SPRG2,r1;						     \
+	mtspr	SPRN_SPRG_SCRATCH0,r10;	/* save two registers to work with */\
+	mtspr	SPRN_SPRG_SCRATCH1,r11;					     \
+	mtspr	SPRN_SPRG_SCRATCH2,r1;					     \
 	mfcr	r10;			/* save CR in r10 for now	   */\
 	mfspr	r11,SPRN_SRR1;		/* check whether user or kernel    */\
 	andi.	r11,r11,MSR_PR;						     \
 	beq	1f;							     \
-	mfspr	r1,SPRN_SPRG3;		/* if from user, start at top of   */\
+	mfspr	r1,SPRN_SPRG_THREAD;	/* if from user, start at top of   */\
 	lwz	r1,THREAD_INFO-THREAD(r1); /* this thread's kernel stack   */\
 	addi	r1,r1,THREAD_SIZE;					     \
 1:	subi	r1,r1,INT_FRAME_SIZE;	/* Allocate an exception frame     */\
@@ -125,13 +125,13 @@ _ENTRY(saved_ksp_limit)
 	stw	r10,_CCR(r11);          /* save various registers	   */\
 	stw	r12,GPR12(r11);						     \
 	stw	r9,GPR9(r11);						     \
-	mfspr	r10,SPRN_SPRG0;						     \
+	mfspr	r10,SPRN_SPRG_SCRATCH0;					     \
 	stw	r10,GPR10(r11);						     \
-	mfspr	r12,SPRN_SPRG1;						     \
+	mfspr	r12,SPRN_SPRG_SCRATCH1;					     \
 	stw	r12,GPR11(r11);						     \
 	mflr	r10;							     \
 	stw	r10,_LINK(r11);						     \
-	mfspr	r10,SPRN_SPRG2;						     \
+	mfspr	r10,SPRN_SPRG_SCRATCH2;					     \
 	mfspr	r12,SPRN_SRR0;						     \
 	stw	r10,GPR1(r11);						     \
 	mfspr	r9,SPRN_SRR1;						     \
@@ -160,7 +160,7 @@ _ENTRY(saved_ksp_limit)
 	lwz	r11,critirq_ctx@l(r11);					     \
 	beq	1f;							     \
 	/* COMING FROM USER MODE */					     \
-	mfspr	r11,SPRN_SPRG3;		/* if from user, start at top of   */\
+	mfspr	r11,SPRN_SPRG_THREAD;	/* if from user, start at top of   */\
 	lwz	r11,THREAD_INFO-THREAD(r11); /* this thread's kernel stack */\
 1:	addi	r11,r11,THREAD_SIZE-INT_FRAME_SIZE; /* Alloc an excpt frm  */\
 	tophys(r11,r11);						     \
@@ -265,8 +265,8 @@ label:
  * and exit.  Otherwise, we call heavywight functions to do the work.
  */
 	START_EXCEPTION(0x0300,	DataStorage)
-	mtspr	SPRN_SPRG0, r10		/* Save some working registers */
-	mtspr	SPRN_SPRG1, r11
+	mtspr	SPRN_SPRG_SCRATCH0, r10 /* Save some working registers */
+	mtspr	SPRN_SPRG_SCRATCH1, r11
 #ifdef CONFIG_403GCX
 	stw     r12, 0(r0)
 	stw     r9, 4(r0)
@@ -275,12 +275,12 @@ label:
 	stw     r11, 8(r0)
 	stw     r12, 12(r0)
 #else
-	mtspr	SPRN_SPRG4, r12
-	mtspr	SPRN_SPRG5, r9
+	mtspr	SPRN_SPRG_SCRATCH3, r12
+	mtspr	SPRN_SPRG_SCRATCH4, r9
 	mfcr	r11
 	mfspr	r12, SPRN_PID
-	mtspr	SPRN_SPRG7, r11
-	mtspr	SPRN_SPRG6, r12
+	mtspr	SPRN_SPRG_SCRATCH6, r11
+	mtspr	SPRN_SPRG_SCRATCH5, r12
 #endif
 
 	/* First, check if it was a zone fault (which means a user
@@ -308,7 +308,7 @@ label:
 	/* Get the PGD for the current thread.
 	 */
 3:
-	mfspr	r11,SPRN_SPRG3
+	mfspr	r11,SPRN_SPRG_THREAD
 	lwz	r11,PGDIR(r11)
 4:
 	tophys(r11, r11)
@@ -355,15 +355,15 @@ label:
 	lwz     r9, 4(r0)
 	lwz     r12, 0(r0)
 #else
-	mfspr	r12, SPRN_SPRG6
-	mfspr	r11, SPRN_SPRG7
+	mfspr	r12, SPRN_SPRG_SCRATCH5
+	mfspr	r11, SPRN_SPRG_SCRATCH6
 	mtspr	SPRN_PID, r12
 	mtcr	r11
-	mfspr	r9, SPRN_SPRG5
-	mfspr	r12, SPRN_SPRG4
+	mfspr	r9, SPRN_SPRG_SCRATCH4
+	mfspr	r12, SPRN_SPRG_SCRATCH3
 #endif
-	mfspr	r11, SPRN_SPRG1
-	mfspr	r10, SPRN_SPRG0
+	mfspr	r11, SPRN_SPRG_SCRATCH1
+	mfspr	r10, SPRN_SPRG_SCRATCH0
 	PPC405_ERR77_SYNC
 	rfi			/* Should sync shadow TLBs */
 	b	.		/* prevent prefetch past rfi */
@@ -380,15 +380,15 @@ label:
 	lwz     r9, 4(r0)
 	lwz     r12, 0(r0)
 #else
-	mfspr	r12, SPRN_SPRG6
-	mfspr	r11, SPRN_SPRG7
+	mfspr	r12, SPRN_SPRG_SCRATCH5
+	mfspr	r11, SPRN_SPRG_SCRATCH6
 	mtspr	SPRN_PID, r12
 	mtcr	r11
-	mfspr	r9, SPRN_SPRG5
-	mfspr	r12, SPRN_SPRG4
+	mfspr	r9, SPRN_SPRG_SCRATCH4
+	mfspr	r12, SPRN_SPRG_SCRATCH3
 #endif
-	mfspr	r11, SPRN_SPRG1
-	mfspr	r10, SPRN_SPRG0
+	mfspr	r11, SPRN_SPRG_SCRATCH1
+	mfspr	r10, SPRN_SPRG_SCRATCH0
 	b	DataAccess
 
 /*
@@ -466,8 +466,8 @@ label:
  * load TLB entries from the page table if they exist.
  */
 	START_EXCEPTION(0x1100,	DTLBMiss)
-	mtspr	SPRN_SPRG0, r10		/* Save some working registers */
-	mtspr	SPRN_SPRG1, r11
+	mtspr	SPRN_SPRG_SCRATCH0, r10 /* Save some working registers */
+	mtspr	SPRN_SPRG_SCRATCH1, r11
 #ifdef CONFIG_403GCX
 	stw     r12, 0(r0)
 	stw     r9, 4(r0)
@@ -476,12 +476,12 @@ label:
 	stw     r11, 8(r0)
 	stw     r12, 12(r0)
 #else
-	mtspr	SPRN_SPRG4, r12
-	mtspr	SPRN_SPRG5, r9
+	mtspr	SPRN_SPRG_SCRATCH3, r12
+	mtspr	SPRN_SPRG_SCRATCH4, r9
 	mfcr	r11
 	mfspr	r12, SPRN_PID
-	mtspr	SPRN_SPRG7, r11
-	mtspr	SPRN_SPRG6, r12
+	mtspr	SPRN_SPRG_SCRATCH6, r11
+	mtspr	SPRN_SPRG_SCRATCH5, r12
 #endif
 	mfspr	r10, SPRN_DEAR		/* Get faulting address */
 
@@ -500,7 +500,7 @@ label:
 	/* Get the PGD for the current thread.
 	 */
 3:
-	mfspr	r11,SPRN_SPRG3
+	mfspr	r11,SPRN_SPRG_THREAD
 	lwz	r11,PGDIR(r11)
 4:
 	tophys(r11, r11)
@@ -550,15 +550,15 @@ label:
 	lwz     r9, 4(r0)
 	lwz     r12, 0(r0)
 #else
-	mfspr	r12, SPRN_SPRG6
-	mfspr	r11, SPRN_SPRG7
+	mfspr	r12, SPRN_SPRG_SCRATCH5
+	mfspr	r11, SPRN_SPRG_SCRATCH6
 	mtspr	SPRN_PID, r12
 	mtcr	r11
-	mfspr	r9, SPRN_SPRG5
-	mfspr	r12, SPRN_SPRG4
+	mfspr	r9, SPRN_SPRG_SCRATCH4
+	mfspr	r12, SPRN_SPRG_SCRATCH3
 #endif
-	mfspr	r11, SPRN_SPRG1
-	mfspr	r10, SPRN_SPRG0
+	mfspr	r11, SPRN_SPRG_SCRATCH1
+	mfspr	r10, SPRN_SPRG_SCRATCH0
 	b	DataAccess
 
 /* 0x1200 - Instruction TLB Miss Exception
@@ -566,8 +566,8 @@ label:
  * registers and bailout to a different point.
  */
 	START_EXCEPTION(0x1200,	ITLBMiss)
-	mtspr	SPRN_SPRG0, r10		/* Save some working registers */
-	mtspr	SPRN_SPRG1, r11
+	mtspr	SPRN_SPRG_SCRATCH0, r10	 /* Save some working registers */
+	mtspr	SPRN_SPRG_SCRATCH1, r11
 #ifdef CONFIG_403GCX
 	stw     r12, 0(r0)
 	stw     r9, 4(r0)
@@ -576,12 +576,12 @@ label:
 	stw     r11, 8(r0)
 	stw     r12, 12(r0)
 #else
-	mtspr	SPRN_SPRG4, r12
-	mtspr	SPRN_SPRG5, r9
+	mtspr	SPRN_SPRG_SCRATCH3, r12
+	mtspr	SPRN_SPRG_SCRATCH4, r9
 	mfcr	r11
 	mfspr	r12, SPRN_PID
-	mtspr	SPRN_SPRG7, r11
-	mtspr	SPRN_SPRG6, r12
+	mtspr	SPRN_SPRG_SCRATCH6, r11
+	mtspr	SPRN_SPRG_SCRATCH5, r12
 #endif
 	mfspr	r10, SPRN_SRR0		/* Get faulting address */
 
@@ -600,7 +600,7 @@ label:
 	/* Get the PGD for the current thread.
 	 */
 3:
-	mfspr	r11,SPRN_SPRG3
+	mfspr	r11,SPRN_SPRG_THREAD
 	lwz	r11,PGDIR(r11)
 4:
 	tophys(r11, r11)
@@ -650,15 +650,15 @@ label:
 	lwz     r9, 4(r0)
 	lwz     r12, 0(r0)
 #else
-	mfspr	r12, SPRN_SPRG6
-	mfspr	r11, SPRN_SPRG7
+	mfspr	r12, SPRN_SPRG_SCRATCH5
+	mfspr	r11, SPRN_SPRG_SCRATCH6
 	mtspr	SPRN_PID, r12
 	mtcr	r11
-	mfspr	r9, SPRN_SPRG5
-	mfspr	r12, SPRN_SPRG4
+	mfspr	r9, SPRN_SPRG_SCRATCH4
+	mfspr	r12, SPRN_SPRG_SCRATCH3
 #endif
-	mfspr	r11, SPRN_SPRG1
-	mfspr	r10, SPRN_SPRG0
+	mfspr	r11, SPRN_SPRG_SCRATCH1
+	mfspr	r10, SPRN_SPRG_SCRATCH0
 	b	InstructionAccess
 
 	EXCEPTION(0x1300, Trap_13, unknown_exception, EXC_XFER_EE)
@@ -803,15 +803,15 @@ finish_tlb_load:
 	lwz     r9, 4(r0)
 	lwz     r12, 0(r0)
 #else
-	mfspr	r12, SPRN_SPRG6
-	mfspr	r11, SPRN_SPRG7
+	mfspr	r12, SPRN_SPRG_SCRATCH5
+	mfspr	r11, SPRN_SPRG_SCRATCH6
 	mtspr	SPRN_PID, r12
 	mtcr	r11
-	mfspr	r9, SPRN_SPRG5
-	mfspr	r12, SPRN_SPRG4
+	mfspr	r9, SPRN_SPRG_SCRATCH4
+	mfspr	r12, SPRN_SPRG_SCRATCH3
 #endif
-	mfspr	r11, SPRN_SPRG1
-	mfspr	r10, SPRN_SPRG0
+	mfspr	r11, SPRN_SPRG_SCRATCH1
+	mfspr	r10, SPRN_SPRG_SCRATCH0
 	PPC405_ERR77_SYNC
 	rfi			/* Should sync shadow TLBs */
 	b	.		/* prevent prefetch past rfi */
@@ -835,7 +835,7 @@ start_here:
 	/* ptr to phys current thread */
 	tophys(r4,r2)
 	addi	r4,r4,THREAD	/* init task's THREAD */
-	mtspr	SPRN_SPRG3,r4
+	mtspr	SPRN_SPRG_THREAD,r4
 
 	/* stack */
 	lis	r1,init_thread_union@ha
diff --git a/arch/powerpc/kernel/head_44x.S b/arch/powerpc/kernel/head_44x.S
index 18d8a1677c4..656cfb2d666 100644
--- a/arch/powerpc/kernel/head_44x.S
+++ b/arch/powerpc/kernel/head_44x.S
@@ -239,7 +239,7 @@ skpinv:	addi	r4,r4,1				/* Increment */
 
 	/* ptr to current thread */
 	addi	r4,r2,THREAD	/* init task's THREAD */
-	mtspr	SPRN_SPRG3,r4
+	mtspr	SPRN_SPRG_THREAD,r4
 
 	/* stack */
 	lis	r1,init_thread_union@h
@@ -350,12 +350,12 @@ interrupt_base:
 
 	/* Data TLB Error Interrupt */
 	START_EXCEPTION(DataTLBError)
-	mtspr	SPRN_SPRG0, r10		/* Save some working registers */
-	mtspr	SPRN_SPRG1, r11
-	mtspr	SPRN_SPRG4W, r12
-	mtspr	SPRN_SPRG5W, r13
+	mtspr	SPRN_SPRG_WSCRATCH0, r10		/* Save some working registers */
+	mtspr	SPRN_SPRG_WSCRATCH1, r11
+	mtspr	SPRN_SPRG_WSCRATCH2, r12
+	mtspr	SPRN_SPRG_WSCRATCH3, r13
 	mfcr	r11
-	mtspr	SPRN_SPRG7W, r11
+	mtspr	SPRN_SPRG_WSCRATCH4, r11
 	mfspr	r10, SPRN_DEAR		/* Get faulting address */
 
 	/* If we are faulting a kernel address, we have to use the
@@ -374,7 +374,7 @@ interrupt_base:
 
 	/* Get the PGD for the current thread */
 3:
-	mfspr	r11,SPRN_SPRG3
+	mfspr	r11,SPRN_SPRG_THREAD
 	lwz	r11,PGDIR(r11)
 
 	/* Load PID into MMUCR TID */
@@ -446,12 +446,12 @@ tlb_44x_patch_hwater_D:
 	/* The bailout.  Restore registers to pre-exception conditions
 	 * and call the heavyweights to help us out.
 	 */
-	mfspr	r11, SPRN_SPRG7R
+	mfspr	r11, SPRN_SPRG_RSCRATCH4
 	mtcr	r11
-	mfspr	r13, SPRN_SPRG5R
-	mfspr	r12, SPRN_SPRG4R
-	mfspr	r11, SPRN_SPRG1
-	mfspr	r10, SPRN_SPRG0
+	mfspr	r13, SPRN_SPRG_RSCRATCH3
+	mfspr	r12, SPRN_SPRG_RSCRATCH2
+	mfspr	r11, SPRN_SPRG_RSCRATCH1
+	mfspr	r10, SPRN_SPRG_RSCRATCH0
 	b	DataStorage
 
 	/* Instruction TLB Error Interrupt */
@@ -461,12 +461,12 @@ tlb_44x_patch_hwater_D:
 	 * to a different point.
 	 */
 	START_EXCEPTION(InstructionTLBError)
-	mtspr	SPRN_SPRG0, r10		/* Save some working registers */
-	mtspr	SPRN_SPRG1, r11
-	mtspr	SPRN_SPRG4W, r12
-	mtspr	SPRN_SPRG5W, r13
+	mtspr	SPRN_SPRG_WSCRATCH0, r10 /* Save some working registers */
+	mtspr	SPRN_SPRG_WSCRATCH1, r11
+	mtspr	SPRN_SPRG_WSCRATCH2, r12
+	mtspr	SPRN_SPRG_WSCRATCH3, r13
 	mfcr	r11
-	mtspr	SPRN_SPRG7W, r11
+	mtspr	SPRN_SPRG_WSCRATCH4, r11
 	mfspr	r10, SPRN_SRR0		/* Get faulting address */
 
 	/* If we are faulting a kernel address, we have to use the
@@ -485,7 +485,7 @@ tlb_44x_patch_hwater_D:
 
 	/* Get the PGD for the current thread */
 3:
-	mfspr	r11,SPRN_SPRG3
+	mfspr	r11,SPRN_SPRG_THREAD
 	lwz	r11,PGDIR(r11)
 
 	/* Load PID into MMUCR TID */
@@ -542,12 +542,12 @@ tlb_44x_patch_hwater_I:
 	/* The bailout.  Restore registers to pre-exception conditions
 	 * and call the heavyweights to help us out.
 	 */
-	mfspr	r11, SPRN_SPRG7R
+	mfspr	r11, SPRN_SPRG_RSCRATCH4
 	mtcr	r11
-	mfspr	r13, SPRN_SPRG5R
-	mfspr	r12, SPRN_SPRG4R
-	mfspr	r11, SPRN_SPRG1
-	mfspr	r10, SPRN_SPRG0
+	mfspr	r13, SPRN_SPRG_RSCRATCH3
+	mfspr	r12, SPRN_SPRG_RSCRATCH2
+	mfspr	r11, SPRN_SPRG_RSCRATCH1
+	mfspr	r10, SPRN_SPRG_RSCRATCH0
 	b	InstructionStorage
 
 	/* Debug Interrupt */
@@ -593,12 +593,12 @@ finish_tlb_load:
 
 	/* Done...restore registers and get out of here.
 	*/
-	mfspr	r11, SPRN_SPRG7R
+	mfspr	r11, SPRN_SPRG_RSCRATCH4
 	mtcr	r11
-	mfspr	r13, SPRN_SPRG5R
-	mfspr	r12, SPRN_SPRG4R
-	mfspr	r11, SPRN_SPRG1
-	mfspr	r10, SPRN_SPRG0
+	mfspr	r13, SPRN_SPRG_RSCRATCH3
+	mfspr	r12, SPRN_SPRG_RSCRATCH2
+	mfspr	r11, SPRN_SPRG_RSCRATCH1
+	mfspr	r10, SPRN_SPRG_RSCRATCH0
 	rfi					/* Force context change */
 
 /*
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index 9196ef36d43..0552f01041a 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -195,7 +195,7 @@ _GLOBAL(generic_secondary_smp_init)
 	mr	r3,r24			/* not found, copy phys to r3	 */
 	b	.kexec_wait		/* next kernel might do better	 */
 
-2:	mtspr	SPRN_SPRG3,r13		/* Save vaddr of paca in SPRG3	 */
+2:	mtspr	SPRN_SPRG_PACA,r13	/* Save vaddr of paca in an SPRG */
 	/* From now on, r24 is expected to be logical cpuid */
 	mr	r24,r5
 3:	HMT_LOW
@@ -484,7 +484,7 @@ _GLOBAL(pmac_secondary_start)
 	LOAD_REG_ADDR(r4,paca)		/* Get base vaddr of paca array	*/
 	mulli	r13,r24,PACA_SIZE	/* Calculate vaddr of right paca */
 	add	r13,r13,r4		/* for this processor.		*/
-	mtspr	SPRN_SPRG3,r13		/* Save vaddr of paca in SPRG3	*/
+	mtspr	SPRN_SPRG_PACA,r13	/* Save vaddr of paca in an SPRG*/
 
 	/* Create a temp kernel stack for use before relocation is on.	*/
 	ld	r1,PACAEMERGSP(r13)
@@ -502,10 +502,10 @@ _GLOBAL(pmac_secondary_start)
  *   1. Processor number
  *   2. Segment table pointer (virtual address)
  * On entry the following are set:
- *   r1	= stack pointer.  vaddr for iSeries, raddr (temp stack) for pSeries
- *   r24   = cpu# (in Linux terms)
- *   r13   = paca virtual address
- *   SPRG3 = paca virtual address
+ *   r1	       = stack pointer.  vaddr for iSeries, raddr (temp stack) for pSeries
+ *   r24       = cpu# (in Linux terms)
+ *   r13       = paca virtual address
+ *   SPRG_PACA = paca virtual address
  */
 	.globl	__secondary_start
 __secondary_start:
@@ -641,7 +641,7 @@ _INIT_STATIC(start_here_multiplatform)
 
 	/* Restore parameters passed from prom_init/kexec */
 	mr	r3,r31
-	bl	.early_setup		/* also sets r13 and SPRG3 */
+	bl	.early_setup		/* also sets r13 and SPRG_PACA */
 
 	LOAD_REG_ADDR(r3, .start_here_common)
 	ld	r4,PACAKMSR(r13)
diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S
index 52ff8c53b93..6ded19d0189 100644
--- a/arch/powerpc/kernel/head_8xx.S
+++ b/arch/powerpc/kernel/head_8xx.S
@@ -110,8 +110,8 @@ turn_on_mmu:
  * task's thread_struct.
  */
 #define EXCEPTION_PROLOG	\
-	mtspr	SPRN_SPRG0,r10;	\
-	mtspr	SPRN_SPRG1,r11;	\
+	mtspr	SPRN_SPRG_SCRATCH0,r10;	\
+	mtspr	SPRN_SPRG_SCRATCH1,r11;	\
 	mfcr	r10;		\
 	EXCEPTION_PROLOG_1;	\
 	EXCEPTION_PROLOG_2
@@ -121,7 +121,7 @@ turn_on_mmu:
 	andi.	r11,r11,MSR_PR;	\
 	tophys(r11,r1);			/* use tophys(r1) if kernel */ \
 	beq	1f;		\
-	mfspr	r11,SPRN_SPRG3;	\
+	mfspr	r11,SPRN_SPRG_THREAD;	\
 	lwz	r11,THREAD_INFO-THREAD(r11);	\
 	addi	r11,r11,THREAD_SIZE;	\
 	tophys(r11,r11);	\
@@ -133,9 +133,9 @@ turn_on_mmu:
 	stw	r10,_CCR(r11);		/* save registers */ \
 	stw	r12,GPR12(r11);	\
 	stw	r9,GPR9(r11);	\
-	mfspr	r10,SPRN_SPRG0;	\
+	mfspr	r10,SPRN_SPRG_SCRATCH0;	\
 	stw	r10,GPR10(r11);	\
-	mfspr	r12,SPRN_SPRG1;	\
+	mfspr	r12,SPRN_SPRG_SCRATCH1;	\
 	stw	r12,GPR11(r11);	\
 	mflr	r10;		\
 	stw	r10,_LINK(r11);	\
@@ -603,8 +603,9 @@ start_here:
 	/* ptr to phys current thread */
 	tophys(r4,r2)
 	addi	r4,r4,THREAD	/* init task's THREAD */
-	mtspr	SPRN_SPRG3,r4
+	mtspr	SPRN_SPRG_THREAD,r4
 	li	r3,0
+	/* XXX What is that for ? SPRG2 appears otherwise unused on 8xx */
 	mtspr	SPRN_SPRG2,r3	/* 0 => r1 has kernel sp */
 
 	/* stack */
diff --git a/arch/powerpc/kernel/head_booke.h b/arch/powerpc/kernel/head_booke.h
index 5f9febc8d14..50504ae39cb 100644
--- a/arch/powerpc/kernel/head_booke.h
+++ b/arch/powerpc/kernel/head_booke.h
@@ -20,14 +20,14 @@
 #endif
 
 #define NORMAL_EXCEPTION_PROLOG						     \
-	mtspr	SPRN_SPRG0,r10;		/* save two registers to work with */\
-	mtspr	SPRN_SPRG1,r11;						     \
-	mtspr	SPRN_SPRG4W,r1;						     \
+	mtspr	SPRN_SPRG_WSCRATCH0,r10;/* save two registers to work with */\
+	mtspr	SPRN_SPRG_WSCRATCH1,r11;				     \
+	mtspr	SPRN_SPRG_WSCRATCH2,r1;					     \
 	mfcr	r10;			/* save CR in r10 for now	   */\
 	mfspr	r11,SPRN_SRR1;		/* check whether user or kernel    */\
 	andi.	r11,r11,MSR_PR;						     \
 	beq	1f;							     \
-	mfspr	r1,SPRN_SPRG3;		/* if from user, start at top of   */\
+	mfspr	r1,SPRN_SPRG_THREAD;	/* if from user, start at top of   */\
 	lwz	r1,THREAD_INFO-THREAD(r1); /* this thread's kernel stack   */\
 	ALLOC_STACK_FRAME(r1, THREAD_SIZE);				     \
 1:	subi	r1,r1,INT_FRAME_SIZE;	/* Allocate an exception frame     */\
@@ -35,13 +35,13 @@
 	stw	r10,_CCR(r11);          /* save various registers	   */\
 	stw	r12,GPR12(r11);						     \
 	stw	r9,GPR9(r11);						     \
-	mfspr	r10,SPRN_SPRG0;						     \
+	mfspr	r10,SPRN_SPRG_RSCRATCH0;					\
 	stw	r10,GPR10(r11);						     \
-	mfspr	r12,SPRN_SPRG1;						     \
+	mfspr	r12,SPRN_SPRG_RSCRATCH1;				     \
 	stw	r12,GPR11(r11);						     \
 	mflr	r10;							     \
 	stw	r10,_LINK(r11);						     \
-	mfspr	r10,SPRN_SPRG4R;					     \
+	mfspr	r10,SPRN_SPRG_RSCRATCH2;				     \
 	mfspr	r12,SPRN_SRR0;						     \
 	stw	r10,GPR1(r11);						     \
 	mfspr	r9,SPRN_SRR1;						     \
@@ -69,21 +69,11 @@
  * providing configurations that micro-optimize space usage.
  */
 
-/* CRIT_SPRG only used in critical exception handling */
-#define CRIT_SPRG	SPRN_SPRG2
-/* MCHECK_SPRG only used in machine check exception handling */
-#define MCHECK_SPRG	SPRN_SPRG6W
-
-#define MCHECK_STACK_BASE	mcheckirq_ctx
+#define MC_STACK_BASE		mcheckirq_ctx
 #define CRIT_STACK_BASE		critirq_ctx
 
 /* only on e500mc/e200 */
-#define DEBUG_STACK_BASE	dbgirq_ctx
-#ifdef CONFIG_E200
-#define DEBUG_SPRG		SPRN_SPRG6W
-#else
-#define DEBUG_SPRG		SPRN_SPRG9
-#endif
+#define DBG_STACK_BASE		dbgirq_ctx
 
 #define EXC_LVL_FRAME_OVERHEAD	(THREAD_SIZE - INT_FRAME_SIZE - EXC_LVL_SIZE)
 
@@ -110,7 +100,7 @@
  * critical/machine check exception stack at low physical addresses.
  */
 #define EXC_LEVEL_EXCEPTION_PROLOG(exc_level, exc_level_srr0, exc_level_srr1) \
-	mtspr	exc_level##_SPRG,r8;					     \
+	mtspr	SPRN_SPRG_WSCRATCH_##exc_level,r8;			     \
 	BOOKE_LOAD_EXC_LEVEL_STACK(exc_level);/* r8 points to the exc_level stack*/ \
 	stw	r9,GPR9(r8);		/* save various registers	   */\
 	mfcr	r9;			/* save CR in r9 for now	   */\
@@ -119,7 +109,7 @@
 	stw	r9,_CCR(r8);		/* save CR on stack		   */\
 	mfspr	r10,exc_level_srr1;	/* check whether user or kernel    */\
 	andi.	r10,r10,MSR_PR;						     \
-	mfspr	r11,SPRN_SPRG3;		/* if from user, start at top of   */\
+	mfspr	r11,SPRN_SPRG_THREAD;	/* if from user, start at top of   */\
 	lwz	r11,THREAD_INFO-THREAD(r11); /* this thread's kernel stack */\
 	addi	r11,r11,EXC_LVL_FRAME_OVERHEAD;	/* allocate stack frame    */\
 	beq	1f;							     \
@@ -140,7 +130,7 @@
 	lwz	r9,TI_TASK-EXC_LVL_FRAME_OVERHEAD(r11);			     \
 	stw	r9,TI_TASK-EXC_LVL_FRAME_OVERHEAD(r8);			     \
 	mr	r11,r8;							     \
-2:	mfspr	r8,exc_level##_SPRG;					     \
+2:	mfspr	r8,SPRN_SPRG_RSCRATCH_##exc_level;			     \
 	stw	r12,GPR12(r11);		/* save various registers	   */\
 	mflr	r10;							     \
 	stw	r10,_LINK(r11);						     \
@@ -161,9 +151,9 @@
 #define CRITICAL_EXCEPTION_PROLOG \
 		EXC_LEVEL_EXCEPTION_PROLOG(CRIT, SPRN_CSRR0, SPRN_CSRR1)
 #define DEBUG_EXCEPTION_PROLOG \
-		EXC_LEVEL_EXCEPTION_PROLOG(DEBUG, SPRN_DSRR0, SPRN_DSRR1)
+		EXC_LEVEL_EXCEPTION_PROLOG(DBG, SPRN_DSRR0, SPRN_DSRR1)
 #define MCHECK_EXCEPTION_PROLOG \
-		EXC_LEVEL_EXCEPTION_PROLOG(MCHECK, SPRN_MCSRR0, SPRN_MCSRR1)
+		EXC_LEVEL_EXCEPTION_PROLOG(MC, SPRN_MCSRR0, SPRN_MCSRR1)
 
 /*
  * Exception vectors.
@@ -282,13 +272,13 @@ label:
 	mtspr	SPRN_DSRR1,r9;						      \
 	lwz	r9,GPR9(r11);						      \
 	lwz	r12,GPR12(r11);						      \
-	mtspr	DEBUG_SPRG,r8;						      \
-	BOOKE_LOAD_EXC_LEVEL_STACK(DEBUG); /* r8 points to the debug stack */ \
+	mtspr	SPRN_SPRG_WSCRATCH_DBG,r8;				      \
+	BOOKE_LOAD_EXC_LEVEL_STACK(DBG); /* r8 points to the debug stack */ \
 	lwz	r10,GPR10(r8);						      \
 	lwz	r11,GPR11(r8);						      \
-	mfspr	r8,DEBUG_SPRG;						      \
+	mfspr	r8,SPRN_SPRG_RSCRATCH_DBG;				      \
 									      \
-	PPC_RFDI;								      \
+	PPC_RFDI;							      \
 	b	.;							      \
 									      \
 	/* continue normal handling for a debug exception... */		      \
@@ -335,11 +325,11 @@ label:
 	mtspr	SPRN_CSRR1,r9;						      \
 	lwz	r9,GPR9(r11);						      \
 	lwz	r12,GPR12(r11);						      \
-	mtspr	CRIT_SPRG,r8;						      \
+	mtspr	SPRN_SPRG_WSCRATCH_CRIT,r8;				      \
 	BOOKE_LOAD_EXC_LEVEL_STACK(CRIT); /* r8 points to the debug stack */  \
 	lwz	r10,GPR10(r8);						      \
 	lwz	r11,GPR11(r8);						      \
-	mfspr	r8,CRIT_SPRG;						      \
+	mfspr	r8,SPRN_SPRG_RSCRATCH_CRIT;				      \
 									      \
 	rfci;								      \
 	b	.;							      \
diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
index 5bdcc06d294..eca80482ae7 100644
--- a/arch/powerpc/kernel/head_fsl_booke.S
+++ b/arch/powerpc/kernel/head_fsl_booke.S
@@ -361,7 +361,7 @@ skpinv:	addi	r6,r6,1				/* Increment */
 
 	/* ptr to current thread */
 	addi	r4,r2,THREAD	/* init task's THREAD */
-	mtspr	SPRN_SPRG3,r4
+	mtspr	SPRN_SPRG_THREAD,r4
 
 	/* stack */
 	lis	r1,init_thread_union@h
@@ -532,12 +532,12 @@ interrupt_base:
 
 	/* Data TLB Error Interrupt */
 	START_EXCEPTION(DataTLBError)
-	mtspr	SPRN_SPRG0, r10		/* Save some working registers */
-	mtspr	SPRN_SPRG1, r11
-	mtspr	SPRN_SPRG4W, r12
-	mtspr	SPRN_SPRG5W, r13
+	mtspr	SPRN_SPRG_WSCRATCH0, r10 /* Save some working registers */
+	mtspr	SPRN_SPRG_WSCRATCH1, r11
+	mtspr	SPRN_SPRG_WSCRATCH2, r12
+	mtspr	SPRN_SPRG_WSCRATCH3, r13
 	mfcr	r11
-	mtspr	SPRN_SPRG7W, r11
+	mtspr	SPRN_SPRG_WSCRATCH4, r11
 	mfspr	r10, SPRN_DEAR		/* Get faulting address */
 
 	/* If we are faulting a kernel address, we have to use the
@@ -557,7 +557,7 @@ interrupt_base:
 
 	/* Get the PGD for the current thread */
 3:
-	mfspr	r11,SPRN_SPRG3
+	mfspr	r11,SPRN_SPRG_THREAD
 	lwz	r11,PGDIR(r11)
 
 4:
@@ -598,12 +598,12 @@ interrupt_base:
 	/* The bailout.  Restore registers to pre-exception conditions
 	 * and call the heavyweights to help us out.
 	 */
-	mfspr	r11, SPRN_SPRG7R
+	mfspr	r11, SPRN_SPRG_RSCRATCH4
 	mtcr	r11
-	mfspr	r13, SPRN_SPRG5R
-	mfspr	r12, SPRN_SPRG4R
-	mfspr	r11, SPRN_SPRG1
-	mfspr	r10, SPRN_SPRG0
+	mfspr	r13, SPRN_SPRG_RSCRATCH3
+	mfspr	r12, SPRN_SPRG_RSCRATCH2
+	mfspr	r11, SPRN_SPRG_RSCRATCH1
+	mfspr	r10, SPRN_SPRG_RSCRATCH0
 	b	DataStorage
 
 	/* Instruction TLB Error Interrupt */
@@ -613,12 +613,12 @@ interrupt_base:
 	 * to a different point.
 	 */
 	START_EXCEPTION(InstructionTLBError)
-	mtspr	SPRN_SPRG0, r10		/* Save some working registers */
-	mtspr	SPRN_SPRG1, r11
-	mtspr	SPRN_SPRG4W, r12
-	mtspr	SPRN_SPRG5W, r13
+	mtspr	SPRN_SPRG_WSCRATCH0, r10 /* Save some working registers */
+	mtspr	SPRN_SPRG_WSCRATCH1, r11
+	mtspr	SPRN_SPRG_WSCRATCH2, r12
+	mtspr	SPRN_SPRG_WSCRATCH3, r13
 	mfcr	r11
-	mtspr	SPRN_SPRG7W, r11
+	mtspr	SPRN_SPRG_WSCRATCH4, r11
 	mfspr	r10, SPRN_SRR0		/* Get faulting address */
 
 	/* If we are faulting a kernel address, we have to use the
@@ -638,7 +638,7 @@ interrupt_base:
 
 	/* Get the PGD for the current thread */
 3:
-	mfspr	r11,SPRN_SPRG3
+	mfspr	r11,SPRN_SPRG_THREAD
 	lwz	r11,PGDIR(r11)
 
 4:
@@ -666,12 +666,12 @@ interrupt_base:
 	/* The bailout.  Restore registers to pre-exception conditions
 	 * and call the heavyweights to help us out.
 	 */
-	mfspr	r11, SPRN_SPRG7R
+	mfspr	r11, SPRN_SPRG_RSCRATCH4
 	mtcr	r11
-	mfspr	r13, SPRN_SPRG5R
-	mfspr	r12, SPRN_SPRG4R
-	mfspr	r11, SPRN_SPRG1
-	mfspr	r10, SPRN_SPRG0
+	mfspr	r13, SPRN_SPRG_RSCRATCH3
+	mfspr	r12, SPRN_SPRG_RSCRATCH2
+	mfspr	r11, SPRN_SPRG_RSCRATCH1
+	mfspr	r10, SPRN_SPRG_RSCRATCH0
 	b	InstructionStorage
 
 #ifdef CONFIG_SPE
@@ -790,12 +790,12 @@ END_MMU_FTR_SECTION_IFSET(MMU_FTR_BIG_PHYS)
 	tlbwe
 
 	/* Done...restore registers and get out of here.  */
-	mfspr	r11, SPRN_SPRG7R
+	mfspr	r11, SPRN_SPRG_RSCRATCH4
 	mtcr	r11
-	mfspr	r13, SPRN_SPRG5R
-	mfspr	r12, SPRN_SPRG4R
-	mfspr	r11, SPRN_SPRG1
-	mfspr	r10, SPRN_SPRG0
+	mfspr	r13, SPRN_SPRG_RSCRATCH3
+	mfspr	r12, SPRN_SPRG_RSCRATCH2
+	mfspr	r11, SPRN_SPRG_RSCRATCH1
+	mfspr	r10, SPRN_SPRG_RSCRATCH0
 	rfi					/* Force context change */
 
 #ifdef CONFIG_SPE
@@ -839,7 +839,7 @@ load_up_spe:
 #endif /* !CONFIG_SMP */
 	/* enable use of SPE after return */
 	oris	r9,r9,MSR_SPE@h
-	mfspr	r5,SPRN_SPRG3		/* current task's THREAD (phys) */
+	mfspr	r5,SPRN_SPRG_THREAD	/* current task's THREAD (phys) */
 	li	r4,1
 	li	r10,THREAD_ACC
 	stw	r4,THREAD_USED_SPE(r5)
@@ -1118,7 +1118,7 @@ __secondary_start:
 
 	/* ptr to current thread */
 	addi	r4,r2,THREAD	/* address of our thread_struct */
-	mtspr	SPRN_SPRG3,r4
+	mtspr	SPRN_SPRG_THREAD,r4
 
 	/* Setup the defaults for TLB entries */
 	li	r4,(MAS4_TSIZED(BOOK3E_PAGESZ_4K))@l
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 1f6816003eb..91b89b8d63d 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -142,11 +142,11 @@ early_param("smt-enabled", early_smt_enabled);
 #define check_smt_enabled()
 #endif /* CONFIG_SMP */
 
-/* Put the paca pointer into r13 and SPRG3 */
+/* Put the paca pointer into r13 and SPRG_PACA */
 void __init setup_paca(int cpu)
 {
 	local_paca = &paca[cpu];
-	mtspr(SPRN_SPRG3, local_paca);
+	mtspr(SPRN_SPRG_PACA, local_paca);
 }
 
 /*
diff --git a/arch/powerpc/kernel/vector.S b/arch/powerpc/kernel/vector.S
index ea4d64644d0..67b6916f0e9 100644
--- a/arch/powerpc/kernel/vector.S
+++ b/arch/powerpc/kernel/vector.S
@@ -65,7 +65,7 @@ _GLOBAL(load_up_altivec)
 1:
 	/* enable use of VMX after return */
 #ifdef CONFIG_PPC32
-	mfspr	r5,SPRN_SPRG3		/* current task's THREAD (phys) */
+	mfspr	r5,SPRN_SPRG_THREAD		/* current task's THREAD (phys) */
 	oris	r9,r9,MSR_VEC@h
 #else
 	ld	r4,PACACURRENT(r13)
diff --git a/arch/powerpc/kvm/booke_interrupts.S b/arch/powerpc/kvm/booke_interrupts.S
index d0c6f841bbd..380a78cf484 100644
--- a/arch/powerpc/kvm/booke_interrupts.S
+++ b/arch/powerpc/kvm/booke_interrupts.S
@@ -56,8 +56,8 @@
 .macro KVM_HANDLER ivor_nr
 _GLOBAL(kvmppc_handler_\ivor_nr)
 	/* Get pointer to vcpu and record exit number. */
-	mtspr	SPRN_SPRG0, r4
-	mfspr	r4, SPRN_SPRG1
+	mtspr	SPRN_SPRG_WSCRATCH0, r4
+	mfspr	r4, SPRN_SPRG_RVCPU
 	stw	r5, VCPU_GPR(r5)(r4)
 	stw	r6, VCPU_GPR(r6)(r4)
 	mfctr	r5
@@ -95,7 +95,7 @@ _GLOBAL(kvmppc_handler_len)
 
 
 /* Registers:
- *  SPRG0: guest r4
+ *  SPRG_SCRATCH0: guest r4
  *  r4: vcpu pointer
  *  r5: KVM exit number
  */
@@ -181,7 +181,7 @@ _GLOBAL(kvmppc_resume_host)
 	stw	r3, VCPU_LR(r4)
 	mfxer	r3
 	stw	r3, VCPU_XER(r4)
-	mfspr	r3, SPRN_SPRG0
+	mfspr	r3, SPRN_SPRG_RSCRATCH0
 	stw	r3, VCPU_GPR(r4)(r4)
 	mfspr	r3, SPRN_SRR0
 	stw	r3, VCPU_PC(r4)
@@ -374,7 +374,7 @@ lightweight_exit:
 	mtspr	SPRN_IVPR, r8
 
 	/* Save vcpu pointer for the exception handlers. */
-	mtspr	SPRN_SPRG1, r4
+	mtspr	SPRN_SPRG_WVCPU, r4
 
 	/* Can't switch the stack pointer until after IVPR is switched,
 	 * because host interrupt handlers would get confused. */
@@ -384,13 +384,13 @@ lightweight_exit:
 	/* Host interrupt handlers may have clobbered these guest-readable
 	 * SPRGs, so we need to reload them here with the guest's values. */
 	lwz	r3, VCPU_SPRG4(r4)
-	mtspr	SPRN_SPRG4, r3
+	mtspr	SPRN_SPRG4W, r3
 	lwz	r3, VCPU_SPRG5(r4)
-	mtspr	SPRN_SPRG5, r3
+	mtspr	SPRN_SPRG5W, r3
 	lwz	r3, VCPU_SPRG6(r4)
-	mtspr	SPRN_SPRG6, r3
+	mtspr	SPRN_SPRG6W, r3
 	lwz	r3, VCPU_SPRG7(r4)
-	mtspr	SPRN_SPRG7, r3
+	mtspr	SPRN_SPRG7W, r3
 
 #ifdef CONFIG_KVM_EXIT_TIMING
 	/* save enter time */
diff --git a/arch/powerpc/mm/hash_low_32.S b/arch/powerpc/mm/hash_low_32.S
index 14af8cedab7..b13d58932bf 100644
--- a/arch/powerpc/mm/hash_low_32.S
+++ b/arch/powerpc/mm/hash_low_32.S
@@ -40,7 +40,7 @@ mmu_hash_lock:
  * The address is in r4, and r3 contains an access flag:
  * _PAGE_RW (0x400) if a write.
  * r9 contains the SRR1 value, from which we use the MSR_PR bit.
- * SPRG3 contains the physical address of the current task's thread.
+ * SPRG_THREAD contains the physical address of the current task's thread.
  *
  * Returns to the caller if the access is illegal or there is no
  * mapping for the address.  Otherwise it places an appropriate PTE
@@ -68,7 +68,7 @@ _GLOBAL(hash_page)
 	/* Get PTE (linux-style) and check access */
 	lis	r0,KERNELBASE@h		/* check if kernel address */
 	cmplw	0,r4,r0
-	mfspr	r8,SPRN_SPRG3		/* current task's THREAD (phys) */
+	mfspr	r8,SPRN_SPRG_THREAD	/* current task's THREAD (phys) */
 	ori	r3,r3,_PAGE_USER|_PAGE_PRESENT /* test low addresses as user */
 	lwz	r5,PGDIR(r8)		/* virt page-table root */
 	blt+	112f			/* assume user more likely */
diff --git a/arch/powerpc/platforms/iseries/exception.S b/arch/powerpc/platforms/iseries/exception.S
index 2f581521eb9..2b807597923 100644
--- a/arch/powerpc/platforms/iseries/exception.S
+++ b/arch/powerpc/platforms/iseries/exception.S
@@ -47,7 +47,7 @@ system_reset_iSeries:
 	LOAD_REG_ADDR(r13, paca)
 	mulli	r0,r23,PACA_SIZE
 	add	r13,r13,r0
-	mtspr	SPRN_SPRG3,r13		/* Save it away for the future */
+	mtspr	SPRN_SPRG_PACA,r13	/* Save it away for the future */
 	mfmsr	r24
 	ori	r24,r24,MSR_RI
 	mtmsrd	r24			/* RI on */
@@ -116,7 +116,7 @@ iSeries_secondary_smp_loop:
 #endif /* CONFIG_SMP */
 	li	r0,-1			/* r0=-1 indicates a Hypervisor call */
 	sc				/* Invoke the hypervisor via a system call */
-	mfspr	r13,SPRN_SPRG3		/* Put r13 back ???? */
+	mfspr	r13,SPRN_SPRG_PACA	/* Put r13 back ???? */
 	b	2b			/* If SMP not configured, secondaries
 					 * loop forever */
 
@@ -126,9 +126,9 @@ iSeries_secondary_smp_loop:
 
 	.globl data_access_iSeries
 data_access_iSeries:
-	mtspr	SPRN_SPRG1,r13
+	mtspr	SPRN_SPRG_SCRATCH0,r13
 BEGIN_FTR_SECTION
-	mtspr	SPRN_SPRG2,r12
+	mtspr	SPRN_SPRG_SCRATCH1,r12
 	mfspr	r13,SPRN_DAR
 	mfspr	r12,SPRN_DSISR
 	srdi	r13,r13,60
@@ -137,7 +137,7 @@ BEGIN_FTR_SECTION
 	cmpwi	r13,0x2c
 	beq	.do_stab_bolted_iSeries
 	mtcrf	0x80,r12
-	mfspr	r12,SPRN_SPRG2
+	mfspr	r12,SPRN_SPRG_SCRATCH1
 END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
 	EXCEPTION_PROLOG_1(PACA_EXGEN)
 	EXCEPTION_PROLOG_ISERIES_1
@@ -145,15 +145,15 @@ END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
 
 .do_stab_bolted_iSeries:
 	mtcrf	0x80,r12
-	mfspr	r12,SPRN_SPRG2
+	mfspr	r12,SPRN_SPRG_SCRATCH1
 	EXCEPTION_PROLOG_1(PACA_EXSLB)
 	EXCEPTION_PROLOG_ISERIES_1
 	b	.do_stab_bolted
 
 	.globl	data_access_slb_iSeries
 data_access_slb_iSeries:
-	mtspr	SPRN_SPRG1,r13		/* save r13 */
-	mfspr	r13,SPRN_SPRG3		/* get paca address into r13 */
+	mtspr	SPRN_SPRG_SCRATCH0,r13	/* save r13 */
+	mfspr	r13,SPRN_SPRG_PACA	/* get paca address into r13 */
 	std	r3,PACA_EXSLB+EX_R3(r13)
 	mfspr	r3,SPRN_DAR
 	std	r9,PACA_EXSLB+EX_R9(r13)
@@ -165,7 +165,7 @@ data_access_slb_iSeries:
 	std	r10,PACA_EXSLB+EX_R10(r13)
 	std	r11,PACA_EXSLB+EX_R11(r13)
 	std	r12,PACA_EXSLB+EX_R12(r13)
-	mfspr	r10,SPRN_SPRG1
+	mfspr	r10,SPRN_SPRG_SCRATCH0
 	std	r10,PACA_EXSLB+EX_R13(r13)
 	ld	r12,PACALPPACAPTR(r13)
 	ld	r12,LPPACASRR1(r12)
@@ -175,8 +175,8 @@ data_access_slb_iSeries:
 
 	.globl	instruction_access_slb_iSeries
 instruction_access_slb_iSeries:
-	mtspr	SPRN_SPRG1,r13		/* save r13 */
-	mfspr	r13,SPRN_SPRG3		/* get paca address into r13 */
+	mtspr	SPRN_SPRG_SCRATCH0,r13	/* save r13 */
+	mfspr	r13,SPRN_SPRG_PACA	/* get paca address into r13 */
 	std	r3,PACA_EXSLB+EX_R3(r13)
 	ld	r3,PACALPPACAPTR(r13)
 	ld	r3,LPPACASRR0(r3)	/* get SRR0 value */
@@ -189,7 +189,7 @@ instruction_access_slb_iSeries:
 	std	r10,PACA_EXSLB+EX_R10(r13)
 	std	r11,PACA_EXSLB+EX_R11(r13)
 	std	r12,PACA_EXSLB+EX_R12(r13)
-	mfspr	r10,SPRN_SPRG1
+	mfspr	r10,SPRN_SPRG_SCRATCH0
 	std	r10,PACA_EXSLB+EX_R13(r13)
 	ld	r12,PACALPPACAPTR(r13)
 	ld	r12,LPPACASRR1(r12)
@@ -200,7 +200,7 @@ slb_miss_user_iseries:
 	std	r10,PACA_EXGEN+EX_R10(r13)
 	std	r11,PACA_EXGEN+EX_R11(r13)
 	std	r12,PACA_EXGEN+EX_R12(r13)
-	mfspr	r10,SPRG1
+	mfspr	r10,SPRG_SCRATCH0
 	ld	r11,PACA_EXSLB+EX_R9(r13)
 	ld	r12,PACA_EXSLB+EX_R3(r13)
 	std	r10,PACA_EXGEN+EX_R13(r13)
@@ -221,7 +221,7 @@ slb_miss_user_iseries:
 	.globl	system_call_iSeries
 system_call_iSeries:
 	mr	r9,r13
-	mfspr	r13,SPRN_SPRG3
+	mfspr	r13,SPRN_SPRG_PACA
 	EXCEPTION_PROLOG_ISERIES_1
 	b	system_call_common
 
diff --git a/arch/powerpc/platforms/iseries/exception.h b/arch/powerpc/platforms/iseries/exception.h
index e26eb86ac73..bae3fba5ad8 100644
--- a/arch/powerpc/platforms/iseries/exception.h
+++ b/arch/powerpc/platforms/iseries/exception.h
@@ -38,7 +38,7 @@
 	.globl label##_iSeries;						\
 label##_iSeries:							\
 	HMT_MEDIUM;							\
-	mtspr	SPRN_SPRG1,r13;		/* save r13 */			\
+	mtspr	SPRN_SPRG_SCRATCH0,r13;	/* save r13 */			\
 	EXCEPTION_PROLOG_1(area);					\
 	EXCEPTION_PROLOG_ISERIES_1;					\
 	b	label##_common
@@ -47,7 +47,7 @@ label##_iSeries:							\
 	.globl label##_iSeries;						\
 label##_iSeries:							\
 	HMT_MEDIUM;							\
-	mtspr	SPRN_SPRG1,r13;		/* save r13 */			\
+	mtspr	SPRN_SPRG_SCRATCH0,r13;	/* save r13 */			\
 	EXCEPTION_PROLOG_1(PACA_EXGEN);					\
 	lbz	r10,PACASOFTIRQEN(r13);					\
 	cmpwi	0,r10,0;						\
-- 
cgit v1.2.3


From c5a8c0c99f67ae8a784faafbaaea1529825796e2 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Thu, 16 Jul 2009 19:36:57 +0000
Subject: powerpc: Remove use of a second scratch SPRG in STAB code

The STAB code used on Power3 and RS/64 uses a second scratch SPRG to
save a GPR in order to decide whether to go to do_stab_bolted_* or
to handle a normal data access exception.

This prevents our scheme of freeing SPRG3 which is user visible for
user uses since we cannot use SPRG0 which, on RS/64, seems to be
read-only for supervisor mode (like POWER4).

This reworks the STAB exception entry to use the PACA as temporary
storage instead.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/exception-64s.h   |  7 ++++--
 arch/powerpc/include/asm/reg.h             |  3 +--
 arch/powerpc/kernel/exceptions-64s.S       | 38 ++++++++++++++++++++----------
 arch/powerpc/platforms/iseries/exception.S | 37 +++++++++++++++++++----------
 4 files changed, 55 insertions(+), 30 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/exception-64s.h b/arch/powerpc/include/asm/exception-64s.h
index 773e380b5fe..a98653b2623 100644
--- a/arch/powerpc/include/asm/exception-64s.h
+++ b/arch/powerpc/include/asm/exception-64s.h
@@ -66,8 +66,7 @@
 	std	r9,area+EX_R13(r13);					\
 	mfcr	r9
 
-#define EXCEPTION_PROLOG_PSERIES(area, label)				\
-	EXCEPTION_PROLOG_1(area);					\
+#define EXCEPTION_PROLOG_PSERIES_1(label)				\
 	ld	r12,PACAKBASE(r13);	/* get high part of &label */	\
 	ld	r10,PACAKMSR(r13);	/* get MSR value for kernel */	\
 	mfspr	r11,SPRN_SRR0;		/* save SRR0 */			\
@@ -78,6 +77,10 @@
 	rfid;								\
 	b	.	/* prevent speculative execution */
 
+#define EXCEPTION_PROLOG_PSERIES(area, label)				\
+	EXCEPTION_PROLOG_1(area);					\
+	EXCEPTION_PROLOG_PSERIES_1(label);
+
 /*
  * The common exception prolog is used for all except a few exceptions
  * such as a segment miss on a kernel address.  We have to be prepared
diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index a8179cc99ac..d17af2b3d4c 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -654,7 +654,7 @@
  * 64-bit server:
  *	- SPRG0 unused (reserved for HV on Power4)
  *	- SPRG1 scratch for exception vectors
- *	- SPRG2 scratch for exception vectors
+ *	- SPRG2 unused
  *
  * All 32-bit:
  *	- SPRG3 current thread_info pointer
@@ -707,7 +707,6 @@
 
 #ifdef CONFIG_PPC_BOOK3S_64
 #define SPRN_SPRG_SCRATCH0	SPRN_SPRG1
-#define SPRN_SPRG_SCRATCH1	SPRN_SPRG2
 #endif
 
 #ifdef CONFIG_PPC_BOOK3S_32
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 4e9640cc056..50f2ad36ed0 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -50,18 +50,28 @@ data_access_pSeries:
 	HMT_MEDIUM
 	mtspr	SPRN_SPRG_SCRATCH0,r13
 BEGIN_FTR_SECTION
-	mtspr	SPRN_SPRG_SCRATCH1,r12
-	mfspr	r13,SPRN_DAR
-	mfspr	r12,SPRN_DSISR
-	srdi	r13,r13,60
-	rlwimi	r13,r12,16,0x20
-	mfcr	r12
-	cmpwi	r13,0x2c
+	mfspr	r13,SPRN_SPRG_PACA
+	std	r9,PACA_EXSLB+EX_R9(r13)
+	std	r10,PACA_EXSLB+EX_R10(r13)
+	mfspr	r10,SPRN_DAR
+	mfspr	r9,SPRN_DSISR
+	srdi	r10,r10,60
+	rlwimi	r10,r9,16,0x20
+	mfcr	r9
+	cmpwi	r10,0x2c
 	beq	do_stab_bolted_pSeries
-	mtcrf	0x80,r12
-	mfspr	r12,SPRN_SPRG_SCRATCH1
-END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
+	ld	r10,PACA_EXSLB+EX_R10(r13)
+	std	r11,PACA_EXGEN+EX_R11(r13)
+	ld	r11,PACA_EXSLB+EX_R9(r13)
+	std	r12,PACA_EXGEN+EX_R12(r13)
+	mfspr	r12,SPRN_SPRG_SCRATCH0
+	std	r10,PACA_EXGEN+EX_R10(r13)
+	std	r11,PACA_EXGEN+EX_R9(r13)
+	std	r12,PACA_EXGEN+EX_R13(r13)
+	EXCEPTION_PROLOG_PSERIES_1(data_access_common)
+FTR_SECTION_ELSE
 	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, data_access_common)
+ALT_FTR_SECTION_END_IFCLR(CPU_FTR_SLB)
 
 	. = 0x380
 	.globl data_access_slb_pSeries
@@ -224,9 +234,11 @@ masked_interrupt:
 
 	.align	7
 do_stab_bolted_pSeries:
-	mtcrf	0x80,r12
-	mfspr	r12,SPRN_SPRG_SCRATCH1
-	EXCEPTION_PROLOG_PSERIES(PACA_EXSLB, .do_stab_bolted)
+	std	r11,PACA_EXSLB+EX_R11(r13)
+	std	r12,PACA_EXSLB+EX_R12(r13)
+	mfspr	r10,SPRN_SPRG_SCRATCH0
+	std	r10,PACA_EXSLB+EX_R13(r13)
+	EXCEPTION_PROLOG_PSERIES_1(.do_stab_bolted)
 
 #ifdef CONFIG_PPC_PSERIES
 /*
diff --git a/arch/powerpc/platforms/iseries/exception.S b/arch/powerpc/platforms/iseries/exception.S
index 2b807597923..5369653dcf6 100644
--- a/arch/powerpc/platforms/iseries/exception.S
+++ b/arch/powerpc/platforms/iseries/exception.S
@@ -128,25 +128,36 @@ iSeries_secondary_smp_loop:
 data_access_iSeries:
 	mtspr	SPRN_SPRG_SCRATCH0,r13
 BEGIN_FTR_SECTION
-	mtspr	SPRN_SPRG_SCRATCH1,r12
-	mfspr	r13,SPRN_DAR
-	mfspr	r12,SPRN_DSISR
-	srdi	r13,r13,60
-	rlwimi	r13,r12,16,0x20
-	mfcr	r12
-	cmpwi	r13,0x2c
+	mfspr	r13,SPRN_SPRG_PACA
+	std	r9,PACA_EXSLB+EX_R9(r13)
+	std	r10,PACA_EXSLB+EX_R10(r13)
+	mfspr	r10,SPRN_DAR
+	mfspr	r9,SPRN_DSISR
+	srdi	r10,r10,60
+	rlwimi	r10,r9,16,0x20
+	mfcr	r9
+	cmpwi	r10,0x2c
 	beq	.do_stab_bolted_iSeries
-	mtcrf	0x80,r12
-	mfspr	r12,SPRN_SPRG_SCRATCH1
-END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
+	ld	r10,PACA_EXSLB+EX_R10(r13)
+	std	r11,PACA_EXGEN+EX_R11(r13)
+	ld	r11,PACA_EXSLB+EX_R9(r13)
+	std	r12,PACA_EXGEN+EX_R12(r13)
+	mfspr	r12,SPRN_SPRG_SCRATCH0
+	std	r10,PACA_EXGEN+EX_R10(r13)
+	std	r11,PACA_EXGEN+EX_R9(r13)
+	std	r12,PACA_EXGEN+EX_R13(r13)
+	EXCEPTION_PROLOG_ISERIES_1
+FTR_SECTION_ELSE
 	EXCEPTION_PROLOG_1(PACA_EXGEN)
 	EXCEPTION_PROLOG_ISERIES_1
+ALT_FTR_SECTION_END_IFCLR(CPU_FTR_SLB)
 	b	data_access_common
 
 .do_stab_bolted_iSeries:
-	mtcrf	0x80,r12
-	mfspr	r12,SPRN_SPRG_SCRATCH1
-	EXCEPTION_PROLOG_1(PACA_EXSLB)
+	std	r11,PACA_EXSLB+EX_R11(r13)
+	std	r12,PACA_EXSLB+EX_R12(r13)
+	mfspr	r10,SPRN_SPRG_SCRATCH0
+	std	r10,PACA_EXSLB+EX_R13(r13)
 	EXCEPTION_PROLOG_ISERIES_1
 	b	.do_stab_bolted
 
-- 
cgit v1.2.3


From 2e2ddb24d36106e029f6eeb3df611178a36fb295 Mon Sep 17 00:00:00 2001
From: roel kluin <roel.kluin@gmail.com>
Date: Tue, 21 Jul 2009 00:17:17 +0000
Subject: powerpc/cell: Replace strncpy by strlcpy

Replace strncpy() and explicit null-termination by strlcpy()

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/platforms/cell/celleb_setup.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/platforms/cell/celleb_setup.c b/arch/powerpc/platforms/cell/celleb_setup.c
index 07c234f6b2b..e5384557977 100644
--- a/arch/powerpc/platforms/cell/celleb_setup.c
+++ b/arch/powerpc/platforms/cell/celleb_setup.c
@@ -80,8 +80,7 @@ static void celleb_show_cpuinfo(struct seq_file *m)
 
 static int __init celleb_machine_type_hack(char *ptr)
 {
-	strncpy(celleb_machine_type, ptr, sizeof(celleb_machine_type));
-	celleb_machine_type[sizeof(celleb_machine_type)-1] = 0;
+	strlcpy(celleb_machine_type, ptr, sizeof(celleb_machine_type));
 	return 0;
 }
 
-- 
cgit v1.2.3


From 066c4b87e927985a083481c92b4aebade8fe4ab3 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Tue, 21 Jul 2009 15:25:53 +0000
Subject: powerpc/mm: Fix definitions of FORCE_MAX_ZONEORDER in Kconfig

The current definitions set ranges and defaults for 32 and 64-bit
only using "PPC_STD_MMU" which means hash based MMU. This uselessly
restrict the usefulness for the upcoming 64-bit BookE port, but more
than that, it's broken on 32-bit since the only 32-bit platform
supporting multiple page sizes currently is 44x which does -not-
have PPC_STD_MMU_32 set.

This fixes it by using PPC64 and PPC32 instead.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/Kconfig | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index d00131ca083..52349ef1b3a 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -492,16 +492,16 @@ endchoice
 
 config FORCE_MAX_ZONEORDER
 	int "Maximum zone order"
-	range 9 64 if PPC_STD_MMU_64 && PPC_64K_PAGES
-	default "9" if PPC_STD_MMU_64 && PPC_64K_PAGES
-	range 13 64 if PPC_STD_MMU_64 && !PPC_64K_PAGES
-	default "13" if PPC_STD_MMU_64 && !PPC_64K_PAGES
-	range 9 64 if PPC_STD_MMU_32 && PPC_16K_PAGES
-	default "9" if PPC_STD_MMU_32 && PPC_16K_PAGES
-	range 7 64 if PPC_STD_MMU_32 && PPC_64K_PAGES
-	default "7" if PPC_STD_MMU_32 && PPC_64K_PAGES
-	range 5 64 if PPC_STD_MMU_32 && PPC_256K_PAGES
-	default "5" if PPC_STD_MMU_32 && PPC_256K_PAGES
+	range 9 64 if PPC64 && PPC_64K_PAGES
+	default "9" if PPC64 && PPC_64K_PAGES
+	range 13 64 if PPC64 && !PPC_64K_PAGES
+	default "13" if PPC64 && !PPC_64K_PAGES
+	range 9 64 if PPC32 && PPC_16K_PAGES
+	default "9" if PPC32 && PPC_16K_PAGES
+	range 7 64 if PPC32 && PPC_64K_PAGES
+	default "7" if PPC32 && PPC_64K_PAGES
+	range 5 64 if PPC32 && PPC_256K_PAGES
+	default "5" if PPC32 && PPC_256K_PAGES
 	range 11 64
 	default "11"
 	help
-- 
cgit v1.2.3


From 527b3639616b21c257518ee7c26fbf05232db0c0 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Tue, 14 Jul 2009 20:56:58 +0000
Subject: powerpc/pmac: Fix PowerSurge SMP IPI allocation

The code for setting up the IPIs for SMP PowerSurge marchines bitrot,
it needs to properly map the HW interrupt number

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/platforms/powermac/smp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c
index 6d4da7b46b4..937a38e7317 100644
--- a/arch/powerpc/platforms/powermac/smp.c
+++ b/arch/powerpc/platforms/powermac/smp.c
@@ -408,7 +408,7 @@ static void __init smp_psurge_setup_cpu(int cpu_nr)
 	/* reset the entry point so if we get another intr we won't
 	 * try to startup again */
 	out_be32(psurge_start, 0x100);
-	if (setup_irq(30, &psurge_irqaction))
+	if (setup_irq(irq_create_mapping(NULL, 30), &psurge_irqaction))
 		printk(KERN_ERR "Couldn't get primary IPI interrupt");
 }
 
-- 
cgit v1.2.3


From 063517bea114d4cb57bf582353d0a99b82775a63 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Tue, 14 Jul 2009 20:52:56 +0000
Subject: powerpc: Change PACA from SPRG3 to SPRG1

This change the SPRG used to store the PACA on ppc64 from
SPRG3 to SPRG1. SPRG3 is user readable on most processors
and we want to use it for other things. We change the scratch
SPRG used by exception vectors from SRPG1 to SPRG2.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/reg.h | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index d17af2b3d4c..2cedbb42761 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -649,12 +649,12 @@
  * SPRG usage:
  *
  * All 64-bit:
- *	- SPRG3 stores PACA pointer
+ *	- SPRG1 stores PACA pointer
  *
  * 64-bit server:
  *	- SPRG0 unused (reserved for HV on Power4)
- *	- SPRG1 scratch for exception vectors
- *	- SPRG2 unused
+ *	- SPRG2 scratch for exception vectors
+ *	- SPRG3 unused (user visible)
  *
  * All 32-bit:
  *	- SPRG3 current thread_info pointer
@@ -700,13 +700,13 @@
  *
  */
 #ifdef CONFIG_PPC64
-#define SPRN_SPRG_PACA 		SPRN_SPRG3
+#define SPRN_SPRG_PACA 		SPRN_SPRG1
 #else
 #define SPRN_SPRG_THREAD 	SPRN_SPRG3
 #endif
 
 #ifdef CONFIG_PPC_BOOK3S_64
-#define SPRN_SPRG_SCRATCH0	SPRN_SPRG1
+#define SPRN_SPRG_SCRATCH0	SPRN_SPRG2
 #endif
 
 #ifdef CONFIG_PPC_BOOK3S_32
-- 
cgit v1.2.3


From f7d4f68d971b8234491b4a0be58aa6f659c1c194 Mon Sep 17 00:00:00 2001
From: Frans Pop <elendil@planet.nl>
Date: Thu, 23 Jul 2009 08:57:18 +0000
Subject: powerpc: Makefile simplification through use of cc-ifversion

Signed-off-by: Frans Pop <elendil@planet.nl>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index bc35f4e2b81..952a3963e9e 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -77,7 +77,7 @@ CPP		= $(CC) -E $(KBUILD_CFLAGS)
 CHECKFLAGS	+= -m$(CONFIG_WORD_SIZE) -D__powerpc__ -D__powerpc$(CONFIG_WORD_SIZE)__
 
 ifeq ($(CONFIG_PPC64),y)
-GCC_BROKEN_VEC	:= $(shell if [ $(call cc-version) -lt 0400 ] ; then echo "y"; fi)
+GCC_BROKEN_VEC	:= $(call cc-ifversion, -lt, 0400, y)
 
 ifeq ($(CONFIG_POWER4_ONLY),y)
 ifeq ($(CONFIG_ALTIVEC),y)
-- 
cgit v1.2.3


From c79b29735d28d819380b584d6707b4110ee759f3 Mon Sep 17 00:00:00 2001
From: Lucian Adrian Grijincu <lgrijincu@ixiacom.com>
Date: Thu, 23 Jul 2009 00:13:37 +0000
Subject: powerpc: Update boot wrapper script with the new location of dtc

dtc was moved in 9fffb55f66127b52c937ede5196ebfa0c0d50bce from
arch/powerpc/boot/ to scripts/dtc/

This patch updates the wrapper script to point to the new location of dtc.

Signed-off-by: Lucian Adrian Grijincu <lgrijincu@ixiacom.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/boot/wrapper | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper
index 4db487d1d2a..ac9e9a58b2b 100755
--- a/arch/powerpc/boot/wrapper
+++ b/arch/powerpc/boot/wrapper
@@ -46,6 +46,7 @@ CROSS=
 # directory for object and other files used by this script
 object=arch/powerpc/boot
 objbin=$object
+dtc=scripts/dtc/dtc
 
 # directory for working files
 tmpdir=.
@@ -124,7 +125,7 @@ if [ -n "$dts" ]; then
     if [ -z "$dtb" ]; then
 	dtb="$platform.dtb"
     fi
-    $object/dtc -O dtb -o "$dtb" -b 0 "$dts"
+    $dtc -O dtb -o "$dtb" -b 0 "$dts"
 fi
 
 if [ -z "$kernel" ]; then
-- 
cgit v1.2.3


From dd90bbd5fb763ab8924135a30956030c7a7b94fc Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Tue, 28 Jul 2009 11:54:32 +1000
Subject: powerpc: Add compat_sys_truncate

The truncate syscall has a signed long parameter, so when using a 32-
bit userspace with a 64-bit kernel the argument is zero-extended
instead of sign-extended. Adding the compat_sys_truncate function
fixes the issue.

This was noticed during an LSB truncate test failure. The test was
checking for the correct error number set when truncate is called with
a length of -1. The test can be found at:

http://bzr.linuxfoundation.org/lsb/devel/runtime-test?cmd=inventory;rev=stewb%40linux-foundation.org-20090626205411-sfb23cc0tjj7jzgm;path=modules/vsx-pcts/tset/POSIX.os/files/truncate/

BenH: Added compat_sys_ftruncate() as well, same issue.

Signed-off-by: Chase Douglas <cndougla@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/systbl.h |  4 ++--
 arch/powerpc/kernel/sys_ppc32.c   | 12 ++++++++++++
 2 files changed, 14 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/systbl.h b/arch/powerpc/include/asm/systbl.h
index 370600ca276..ed24bd92fe4 100644
--- a/arch/powerpc/include/asm/systbl.h
+++ b/arch/powerpc/include/asm/systbl.h
@@ -95,8 +95,8 @@ SYSCALL(reboot)
 SYSX(sys_ni_syscall,compat_sys_old_readdir,sys_old_readdir)
 SYSCALL_SPU(mmap)
 SYSCALL_SPU(munmap)
-SYSCALL_SPU(truncate)
-SYSCALL_SPU(ftruncate)
+COMPAT_SYS_SPU(truncate)
+COMPAT_SYS_SPU(ftruncate)
 SYSCALL_SPU(fchmod)
 SYSCALL_SPU(fchown)
 COMPAT_SYS_SPU(getpriority)
diff --git a/arch/powerpc/kernel/sys_ppc32.c b/arch/powerpc/kernel/sys_ppc32.c
index bb1cfcfdbbb..1cc5e9e5da9 100644
--- a/arch/powerpc/kernel/sys_ppc32.c
+++ b/arch/powerpc/kernel/sys_ppc32.c
@@ -343,6 +343,18 @@ off_t ppc32_lseek(unsigned int fd, u32 offset, unsigned int origin)
 	return sys_lseek(fd, (int)offset, origin);
 }
 
+long compat_sys_truncate(const char __user * path, u32 length)
+{
+	/* sign extend length */
+	return sys_truncate(path, (int)length);
+}
+
+long compat_sys_ftruncate(int fd, u32 length)
+{
+	/* sign extend length */
+	return sys_ftruncate(fd, (int)length);
+}
+
 /* Note: it is necessary to treat bufsiz as an unsigned int,
  * with the corresponding cast to a signed int to insure that the 
  * proper conversion (sign extension) between the register representation of a signed int (msr in 32-bit mode)
-- 
cgit v1.2.3


From 7d60b02cc7e6d67b498eed9ecb58010f61422325 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Thu, 23 Jul 2009 23:15:04 +0000
Subject: powerpc/mm: Fix misplaced #endif in pgtable-ppc64-64k.h

A misplaced #endif causes more definitions than intended to be
protected by #ifndef __ASSEMBLY__. This breaks upcoming 64-bit
BookE support patch when using 64k pages.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/pgtable-ppc64-64k.h | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/pgtable-ppc64-64k.h b/arch/powerpc/include/asm/pgtable-ppc64-64k.h
index 6cc085b945a..90533ddcd70 100644
--- a/arch/powerpc/include/asm/pgtable-ppc64-64k.h
+++ b/arch/powerpc/include/asm/pgtable-ppc64-64k.h
@@ -10,10 +10,10 @@
 #define PGD_INDEX_SIZE  4
 
 #ifndef __ASSEMBLY__
-
 #define PTE_TABLE_SIZE	(sizeof(real_pte_t) << PTE_INDEX_SIZE)
 #define PMD_TABLE_SIZE	(sizeof(pmd_t) << PMD_INDEX_SIZE)
 #define PGD_TABLE_SIZE	(sizeof(pgd_t) << PGD_INDEX_SIZE)
+#endif	/* __ASSEMBLY__ */
 
 #define PTRS_PER_PTE	(1 << PTE_INDEX_SIZE)
 #define PTRS_PER_PMD	(1 << PMD_INDEX_SIZE)
@@ -32,8 +32,6 @@
 #define PGDIR_SIZE	(1UL << PGDIR_SHIFT)
 #define PGDIR_MASK	(~(PGDIR_SIZE-1))
 
-#endif	/* __ASSEMBLY__ */
-
 /* Bits to mask out from a PMD to get to the PTE page */
 #define PMD_MASKED_BITS		0x1ff
 /* Bits to mask out from a PGD/PUD to get to the PMD page */
-- 
cgit v1.2.3


From 6c1719942e19936044c4673b18afa26e45a02320 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Thu, 23 Jul 2009 23:15:07 +0000
Subject: powerpc/of: Remove useless register save/restore when calling OF back

enter_prom() used to save and restore registers such as CTR, XER etc..
which are volatile, or SRR0,1... which we don't care about. This
removes a bunch of useless code and while at it turns an mtmsrd into
an MTMSRD macro which will be useful to Book3E.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/entry_64.S | 38 ++++++--------------------------------
 1 file changed, 6 insertions(+), 32 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index dbf0e311561..1cb0f3d1714 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -823,30 +823,17 @@ _GLOBAL(enter_prom)
 	 * of all registers that it saves.  We therefore save those registers
 	 * PROM might touch to the stack.  (r0, r3-r13 are caller saved)
    	 */
-	SAVE_8GPRS(2, r1)
+	SAVE_GPR(2, r1)
 	SAVE_GPR(13, r1)
 	SAVE_8GPRS(14, r1)
 	SAVE_10GPRS(22, r1)
-	mfcr	r4
-	std	r4,_CCR(r1)
-	mfctr	r5
-	std	r5,_CTR(r1)
-	mfspr	r6,SPRN_XER
-	std	r6,_XER(r1)
-	mfdar	r7
-	std	r7,_DAR(r1)
-	mfdsisr	r8
-	std	r8,_DSISR(r1)
-	mfsrr0	r9
-	std	r9,_SRR0(r1)
-	mfsrr1	r10
-	std	r10,_SRR1(r1)
+	mfcr	r10
 	mfmsr	r11
+	std	r10,_CCR(r1)
 	std	r11,_MSR(r1)
 
 	/* Get the PROM entrypoint */
-	ld	r0,GPR4(r1)
-	mtlr	r0
+	mtlr	r4
 
 	/* Switch MSR to 32 bits mode
 	 */
@@ -860,8 +847,7 @@ _GLOBAL(enter_prom)
         mtmsrd  r11
         isync
 
-	/* Restore arguments & enter PROM here... */
-	ld	r3,GPR3(r1)
+	/* Enter PROM here... */
 	blrl
 
 	/* Just make sure that r1 top 32 bits didn't get
@@ -871,7 +857,7 @@ _GLOBAL(enter_prom)
 
 	/* Restore the MSR (back to 64 bits) */
 	ld	r0,_MSR(r1)
-	mtmsrd	r0
+	MTMSRD(r0)
         isync
 
 	/* Restore other registers */
@@ -881,18 +867,6 @@ _GLOBAL(enter_prom)
 	REST_10GPRS(22, r1)
 	ld	r4,_CCR(r1)
 	mtcr	r4
-	ld	r5,_CTR(r1)
-	mtctr	r5
-	ld	r6,_XER(r1)
-	mtspr	SPRN_XER,r6
-	ld	r7,_DAR(r1)
-	mtdar	r7
-	ld	r8,_DSISR(r1)
-	mtdsisr	r8
-	ld	r9,_SRR0(r1)
-	mtsrr0	r9
-	ld	r10,_SRR1(r1)
-	mtsrr1	r10
 	
         addi	r1,r1,PROM_FRAME_SIZE
 	ld	r0,16(r1)
-- 
cgit v1.2.3


From fcce810986b3f32a8322faf240f8cc5560a4c463 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Thu, 23 Jul 2009 23:15:10 +0000
Subject: powerpc/mm: Add HW threads support to no_hash TLB management

The current "no hash" MMU context management code is written with
the assumption that one CPU == one TLB. This is not the case on
implementations that support HW multithreading, where several
linux CPUs can share the same TLB.

This adds some basic support for this to our context management
and our TLB flushing code.

It also cleans up the optional debugging output a bit

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/cputhreads.h | 16 ++++++
 arch/powerpc/mm/mmu_context_nohash.c  | 93 +++++++++++++++++++++++------------
 arch/powerpc/mm/tlb_nohash.c          | 10 +++-
 3 files changed, 86 insertions(+), 33 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/cputhreads.h b/arch/powerpc/include/asm/cputhreads.h
index fb11b0c459b..a8e18447c62 100644
--- a/arch/powerpc/include/asm/cputhreads.h
+++ b/arch/powerpc/include/asm/cputhreads.h
@@ -5,6 +5,15 @@
 
 /*
  * Mapping of threads to cores
+ *
+ * Note: This implementation is limited to a power of 2 number of
+ * threads per core and the same number for each core in the system
+ * (though it would work if some processors had less threads as long
+ * as the CPU numbers are still allocated, just not brought offline).
+ *
+ * However, the API allows for a different implementation in the future
+ * if needed, as long as you only use the functions and not the variables
+ * directly.
  */
 
 #ifdef CONFIG_SMP
@@ -67,5 +76,12 @@ static inline int cpu_first_thread_in_core(int cpu)
 	return cpu & ~(threads_per_core - 1);
 }
 
+static inline int cpu_last_thread_in_core(int cpu)
+{
+	return cpu | (threads_per_core - 1);
+}
+
+
+
 #endif /* _ASM_POWERPC_CPUTHREADS_H */
 
diff --git a/arch/powerpc/mm/mmu_context_nohash.c b/arch/powerpc/mm/mmu_context_nohash.c
index b1a727def15..834436d6d6b 100644
--- a/arch/powerpc/mm/mmu_context_nohash.c
+++ b/arch/powerpc/mm/mmu_context_nohash.c
@@ -25,10 +25,20 @@
  *     also clear mm->cpu_vm_mask bits when processes are migrated
  */
 
-#undef DEBUG
-#define DEBUG_STEAL_ONLY
-#undef DEBUG_MAP_CONSISTENCY
-/*#define DEBUG_CLAMP_LAST_CONTEXT   15 */
+#define DEBUG_MAP_CONSISTENCY
+#define DEBUG_CLAMP_LAST_CONTEXT   31
+//#define DEBUG_HARDER
+
+/* We don't use DEBUG because it tends to be compiled in always nowadays
+ * and this would generate way too much output
+ */
+#ifdef DEBUG_HARDER
+#define pr_hard(args...)	printk(KERN_DEBUG args)
+#define pr_hardcont(args...)	printk(KERN_CONT args)
+#else
+#define pr_hard(args...)	do { } while(0)
+#define pr_hardcont(args...)	do { } while(0)
+#endif
 
 #include <linux/kernel.h>
 #include <linux/mm.h>
@@ -71,7 +81,7 @@ static DEFINE_SPINLOCK(context_lock);
 static unsigned int steal_context_smp(unsigned int id)
 {
 	struct mm_struct *mm;
-	unsigned int cpu, max;
+	unsigned int cpu, max, i;
 
 	max = last_context - first_context;
 
@@ -89,15 +99,22 @@ static unsigned int steal_context_smp(unsigned int id)
 				id = first_context;
 			continue;
 		}
-		pr_devel("[%d] steal context %d from mm @%p\n",
-			 smp_processor_id(), id, mm);
+		pr_hardcont(" | steal %d from 0x%p", id, mm);
 
 		/* Mark this mm has having no context anymore */
 		mm->context.id = MMU_NO_CONTEXT;
 
-		/* Mark it stale on all CPUs that used this mm */
-		for_each_cpu(cpu, mm_cpumask(mm))
-			__set_bit(id, stale_map[cpu]);
+		/* Mark it stale on all CPUs that used this mm. For threaded
+		 * implementations, we set it on all threads on each core
+		 * represented in the mask. A future implementation will use
+		 * a core map instead but this will do for now.
+		 */
+		for_each_cpu(cpu, mm_cpumask(mm)) {
+			for (i = cpu_first_thread_in_core(cpu);
+			     i <= cpu_last_thread_in_core(cpu); i++)
+				__set_bit(id, stale_map[i]);
+			cpu = i - 1;
+		}
 		return id;
 	}
 
@@ -126,7 +143,7 @@ static unsigned int steal_context_up(unsigned int id)
 	/* Pick up the victim mm */
 	mm = context_mm[id];
 
-	pr_devel("[%d] steal context %d from mm @%p\n", cpu, id, mm);
+	pr_hardcont(" | steal %d from 0x%p", id, mm);
 
 	/* Flush the TLB for that context */
 	local_flush_tlb_mm(mm);
@@ -179,19 +196,14 @@ void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next)
 	/* No lockless fast path .. yet */
 	spin_lock(&context_lock);
 
-#ifndef DEBUG_STEAL_ONLY
-	pr_devel("[%d] activating context for mm @%p, active=%d, id=%d\n",
-		 cpu, next, next->context.active, next->context.id);
-#endif
+	pr_hard("[%d] activating context for mm @%p, active=%d, id=%d",
+		cpu, next, next->context.active, next->context.id);
 
 #ifdef CONFIG_SMP
 	/* Mark us active and the previous one not anymore */
 	next->context.active++;
 	if (prev) {
-#ifndef DEBUG_STEAL_ONLY
-		pr_devel(" old context %p active was: %d\n",
-			 prev, prev->context.active);
-#endif
+		pr_hardcont(" (old=0x%p a=%d)", prev, prev->context.active);
 		WARN_ON(prev->context.active < 1);
 		prev->context.active--;
 	}
@@ -201,8 +213,14 @@ void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next)
 
 	/* If we already have a valid assigned context, skip all that */
 	id = next->context.id;
-	if (likely(id != MMU_NO_CONTEXT))
+	if (likely(id != MMU_NO_CONTEXT)) {
+#ifdef DEBUG_MAP_CONSISTENCY
+		if (context_mm[id] != next)
+			pr_err("MMU: mm 0x%p has id %d but context_mm[%d] says 0x%p\n",
+			       next, id, id, context_mm[id]);
+#endif
 		goto ctxt_ok;
+	}
 
 	/* We really don't have a context, let's try to acquire one */
 	id = next_context;
@@ -235,11 +253,7 @@ void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next)
 	next_context = id + 1;
 	context_mm[id] = next;
 	next->context.id = id;
-
-#ifndef DEBUG_STEAL_ONLY
-	pr_devel("[%d] picked up new id %d, nrf is now %d\n",
-		 cpu, id, nr_free_contexts);
-#endif
+	pr_hardcont(" | new id=%d,nrf=%d", id, nr_free_contexts);
 
 	context_check_map();
  ctxt_ok:
@@ -248,15 +262,20 @@ void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next)
 	 * local TLB for it and unmark it before we use it
 	 */
 	if (test_bit(id, stale_map[cpu])) {
-		pr_devel("[%d] flushing stale context %d for mm @%p !\n",
-			 cpu, id, next);
+		pr_hardcont(" | stale flush %d [%d..%d]",
+			    id, cpu_first_thread_in_core(cpu),
+			    cpu_last_thread_in_core(cpu));
+
 		local_flush_tlb_mm(next);
 
 		/* XXX This clear should ultimately be part of local_flush_tlb_mm */
-		__clear_bit(id, stale_map[cpu]);
+		for (cpu = cpu_first_thread_in_core(cpu);
+		     cpu <= cpu_last_thread_in_core(cpu); cpu++)
+			__clear_bit(id, stale_map[cpu]);
 	}
 
 	/* Flick the MMU and release lock */
+	pr_hardcont(" -> %d\n", id);
 	set_context(id, next->pgd);
 	spin_unlock(&context_lock);
 }
@@ -266,6 +285,8 @@ void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next)
  */
 int init_new_context(struct task_struct *t, struct mm_struct *mm)
 {
+	pr_hard("initing context for mm @%p\n", mm);
+
 	mm->context.id = MMU_NO_CONTEXT;
 	mm->context.active = 0;
 
@@ -305,7 +326,9 @@ static int __cpuinit mmu_context_cpu_notify(struct notifier_block *self,
 					    unsigned long action, void *hcpu)
 {
 	unsigned int cpu = (unsigned int)(long)hcpu;
-
+#ifdef CONFIG_HOTPLUG_CPU
+	struct task_struct *p;
+#endif
 	/* We don't touch CPU 0 map, it's allocated at aboot and kept
 	 * around forever
 	 */
@@ -324,8 +347,16 @@ static int __cpuinit mmu_context_cpu_notify(struct notifier_block *self,
 		pr_devel("MMU: Freeing stale context map for CPU %d\n", cpu);
 		kfree(stale_map[cpu]);
 		stale_map[cpu] = NULL;
-		break;
-#endif
+
+		/* We also clear the cpu_vm_mask bits of CPUs going away */
+		read_lock(&tasklist_lock);
+		for_each_process(p) {
+			if (p->mm)
+				cpu_mask_clear_cpu(cpu, mm_cpumask(p->mm));
+		}
+		read_unlock(&tasklist_lock);
+	break;
+#endif /* CONFIG_HOTPLUG_CPU */
 	}
 	return NOTIFY_OK;
 }
diff --git a/arch/powerpc/mm/tlb_nohash.c b/arch/powerpc/mm/tlb_nohash.c
index ad2eb4d34dd..d908e75cc3b 100644
--- a/arch/powerpc/mm/tlb_nohash.c
+++ b/arch/powerpc/mm/tlb_nohash.c
@@ -87,6 +87,12 @@ EXPORT_SYMBOL(local_flush_tlb_page);
 
 static DEFINE_SPINLOCK(tlbivax_lock);
 
+static int mm_is_core_local(struct mm_struct *mm)
+{
+	return cpumask_subset(mm_cpumask(mm),
+			      topology_thread_cpumask(smp_processor_id()));
+}
+
 struct tlb_flush_param {
 	unsigned long addr;
 	unsigned int pid;
@@ -131,7 +137,7 @@ void flush_tlb_mm(struct mm_struct *mm)
 	pid = mm->context.id;
 	if (unlikely(pid == MMU_NO_CONTEXT))
 		goto no_context;
-	if (!cpumask_equal(mm_cpumask(mm), cpumask_of(smp_processor_id()))) {
+	if (!mm_is_core_local(mm)) {
 		struct tlb_flush_param p = { .pid = pid };
 		/* Ignores smp_processor_id() even if set. */
 		smp_call_function_many(mm_cpumask(mm),
@@ -153,7 +159,7 @@ void flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr)
 	if (unlikely(pid == MMU_NO_CONTEXT))
 		goto bail;
 	cpu_mask = mm_cpumask(vma->vm_mm);
-	if (!cpumask_equal(cpu_mask, cpumask_of(smp_processor_id()))) {
+	if (!mm_is_core_local(mm)) {
 		/* If broadcast tlbivax is supported, use it */
 		if (mmu_has_feature(MMU_FTR_USE_TLBIVAX_BCAST)) {
 			int lock = mmu_has_feature(MMU_FTR_LOCK_BCAST_INVAL);
-- 
cgit v1.2.3


From 29c09e8fbaf65698c51aeffe34acc284a454a38f Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Thu, 23 Jul 2009 23:15:11 +0000
Subject: powerpc/mm: Add opcode definitions for tlbivax and tlbsrx.

This adds the opcode definitions to ppc-opcode.h for the two instructions
tlbivax and tlbsrx. as defined by Book3E 2.06

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/ppc-opcode.h | 6 ++++++
 1 file changed, 6 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/ppc-opcode.h b/arch/powerpc/include/asm/ppc-opcode.h
index b74f16d45cb..ef9aa84cac5 100644
--- a/arch/powerpc/include/asm/ppc-opcode.h
+++ b/arch/powerpc/include/asm/ppc-opcode.h
@@ -48,6 +48,8 @@
 #define PPC_INST_TLBIE			0x7c000264
 #define PPC_INST_TLBILX			0x7c000024
 #define PPC_INST_WAIT			0x7c00007c
+#define PPC_INST_TLBIVAX		0x7c000624
+#define PPC_INST_TLBSRX_DOT		0x7c0006a5
 
 /* macros to insert fields into opcodes */
 #define __PPC_RA(a)	(((a) & 0x1f) << 16)
@@ -76,6 +78,10 @@
 					__PPC_WC(w))
 #define PPC_TLBIE(lp,a) 	stringify_in_c(.long PPC_INST_TLBIE | \
 					       __PPC_RB(a) | __PPC_RS(lp))
+#define PPC_TLBSRX_DOT(a,b)	stringify_in_c(.long PPC_INST_TLBSRX_DOT | \
+					__PPC_RA(a) | __PPC_RB(b))
+#define PPC_TLBIVAX(a,b)	stringify_in_c(.long PPC_INST_TLBIVAX | \
+					__PPC_RA(a) | __PPC_RB(b))
 
 /*
  * Define what the VSX XX1 form instructions will look like, then add
-- 
cgit v1.2.3


From 1fe1a21005c14ad772caeb9005580f473c4b6c57 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Thu, 23 Jul 2009 23:15:12 +0000
Subject: powerpc/mm: Add more bit definitions for Book3E MMU registers

This adds various additional bit definitions for various MMU related
SPRs used on Book3E.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/mmu-book3e.h | 168 ++++++++++++++++++++++++----------
 1 file changed, 119 insertions(+), 49 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/mmu-book3e.h b/arch/powerpc/include/asm/mmu-book3e.h
index 7e74cff81d8..42a39b4aace 100644
--- a/arch/powerpc/include/asm/mmu-book3e.h
+++ b/arch/powerpc/include/asm/mmu-book3e.h
@@ -38,58 +38,128 @@
 #define BOOK3E_PAGESZ_1TB	30
 #define BOOK3E_PAGESZ_2TB	31
 
-#define MAS0_TLBSEL(x)	((x << 28) & 0x30000000)
-#define MAS0_ESEL(x)	((x << 16) & 0x0FFF0000)
-#define MAS0_NV(x)	((x) & 0x00000FFF)
-
-#define MAS1_VALID 	0x80000000
-#define MAS1_IPROT	0x40000000
-#define MAS1_TID(x)	((x << 16) & 0x3FFF0000)
-#define MAS1_IND	0x00002000
-#define MAS1_TS		0x00001000
-#define MAS1_TSIZE(x)	((x << 7) & 0x00000F80)
-
-#define MAS2_EPN	0xFFFFF000
-#define MAS2_X0		0x00000040
-#define MAS2_X1		0x00000020
-#define MAS2_W		0x00000010
-#define MAS2_I		0x00000008
-#define MAS2_M		0x00000004
-#define MAS2_G		0x00000002
-#define MAS2_E		0x00000001
+/* MAS registers bit definitions */
+
+#define MAS0_TLBSEL(x)		((x << 28) & 0x30000000)
+#define MAS0_ESEL(x)		((x << 16) & 0x0FFF0000)
+#define MAS0_NV(x)		((x) & 0x00000FFF)
+#define MAS0_HES		0x00004000
+#define MAS0_WQ_ALLWAYS		0x00000000
+#define MAS0_WQ_COND		0x00001000
+#define MAS0_WQ_CLR_RSRV       	0x00002000
+
+#define MAS1_VALID		0x80000000
+#define MAS1_IPROT		0x40000000
+#define MAS1_TID(x)		((x << 16) & 0x3FFF0000)
+#define MAS1_IND		0x00002000
+#define MAS1_TS			0x00001000
+#define MAS1_TSIZE_MASK		0x00000f80
+#define MAS1_TSIZE_SHIFT	7
+#define MAS1_TSIZE(x)		((x << MAS1_TSIZE_SHIFT) & MAS1_TSIZE_MASK)
+
+#define MAS2_EPN		0xFFFFF000
+#define MAS2_X0			0x00000040
+#define MAS2_X1			0x00000020
+#define MAS2_W			0x00000010
+#define MAS2_I			0x00000008
+#define MAS2_M			0x00000004
+#define MAS2_G			0x00000002
+#define MAS2_E			0x00000001
 #define MAS2_EPN_MASK(size)		(~0 << (size + 10))
 #define MAS2_VAL(addr, size, flags)	((addr) & MAS2_EPN_MASK(size) | (flags))
 
-#define MAS3_RPN	0xFFFFF000
-#define MAS3_U0		0x00000200
-#define MAS3_U1		0x00000100
-#define MAS3_U2		0x00000080
-#define MAS3_U3		0x00000040
-#define MAS3_UX		0x00000020
-#define MAS3_SX		0x00000010
-#define MAS3_UW		0x00000008
-#define MAS3_SW		0x00000004
-#define MAS3_UR		0x00000002
-#define MAS3_SR		0x00000001
-
-#define MAS4_TLBSELD(x) MAS0_TLBSEL(x)
-#define MAS4_INDD	0x00008000
-#define MAS4_TSIZED(x)	MAS1_TSIZE(x)
-#define MAS4_X0D	0x00000040
-#define MAS4_X1D	0x00000020
-#define MAS4_WD		0x00000010
-#define MAS4_ID		0x00000008
-#define MAS4_MD		0x00000004
-#define MAS4_GD		0x00000002
-#define MAS4_ED		0x00000001
-
-#define MAS6_SPID0	0x3FFF0000
-#define MAS6_SPID1	0x00007FFE
-#define MAS6_ISIZE(x)	MAS1_TSIZE(x)
-#define MAS6_SAS	0x00000001
-#define MAS6_SPID	MAS6_SPID0
-
-#define MAS7_RPN	0xFFFFFFFF
+#define MAS3_RPN		0xFFFFF000
+#define MAS3_U0			0x00000200
+#define MAS3_U1			0x00000100
+#define MAS3_U2			0x00000080
+#define MAS3_U3			0x00000040
+#define MAS3_UX			0x00000020
+#define MAS3_SX			0x00000010
+#define MAS3_UW			0x00000008
+#define MAS3_SW			0x00000004
+#define MAS3_UR			0x00000002
+#define MAS3_SR			0x00000001
+#define MAS3_SPSIZE		0x0000003e
+#define MAS3_SPSIZE_SHIFT	1
+
+#define MAS4_TLBSELD(x) 	MAS0_TLBSEL(x)
+#define MAS4_INDD		0x00008000	/* Default IND */
+#define MAS4_TSIZED(x)		MAS1_TSIZE(x)
+#define MAS4_X0D		0x00000040
+#define MAS4_X1D		0x00000020
+#define MAS4_WD			0x00000010
+#define MAS4_ID			0x00000008
+#define MAS4_MD			0x00000004
+#define MAS4_GD			0x00000002
+#define MAS4_ED			0x00000001
+#define MAS4_WIMGED_MASK	0x0000001f	/* Default WIMGE */
+#define MAS4_WIMGED_SHIFT	0
+#define MAS4_VLED		MAS4_X1D	/* Default VLE */
+#define MAS4_ACMD		0x000000c0	/* Default ACM */
+#define MAS4_ACMD_SHIFT		6
+#define MAS4_TSIZED_MASK	0x00000f80	/* Default TSIZE */
+#define MAS4_TSIZED_SHIFT	7
+
+#define MAS6_SPID0		0x3FFF0000
+#define MAS6_SPID1		0x00007FFE
+#define MAS6_ISIZE(x)		MAS1_TSIZE(x)
+#define MAS6_SAS		0x00000001
+#define MAS6_SPID		MAS6_SPID0
+#define MAS6_SIND 		0x00000002	/* Indirect page */
+#define MAS6_SIND_SHIFT		1
+#define MAS6_SPID_MASK		0x3fff0000
+#define MAS6_SPID_SHIFT		16
+#define MAS6_ISIZE_MASK		0x00000f80
+#define MAS6_ISIZE_SHIFT	7
+
+#define MAS7_RPN		0xFFFFFFFF
+
+/* TLBnCFG encoding */
+#define TLBnCFG_N_ENTRY		0x00000fff	/* number of entries */
+#define TLBnCFG_HES		0x00002000	/* HW select supported */
+#define TLBnCFG_IPROT		0x00008000	/* IPROT supported */
+#define TLBnCFG_GTWE		0x00010000	/* Guest can write */
+#define TLBnCFG_IND		0x00020000	/* IND entries supported */
+#define TLBnCFG_PT		0x00040000	/* Can load from page table */
+#define TLBnCFG_ASSOC		0xff000000	/* Associativity */
+
+/* TLBnPS encoding */
+#define TLBnPS_4K		0x00000004
+#define TLBnPS_8K		0x00000008
+#define TLBnPS_16K		0x00000010
+#define TLBnPS_32K		0x00000020
+#define TLBnPS_64K		0x00000040
+#define TLBnPS_128K		0x00000080
+#define TLBnPS_256K		0x00000100
+#define TLBnPS_512K		0x00000200
+#define TLBnPS_1M 		0x00000400
+#define TLBnPS_2M 		0x00000800
+#define TLBnPS_4M 		0x00001000
+#define TLBnPS_8M 		0x00002000
+#define TLBnPS_16M		0x00004000
+#define TLBnPS_32M		0x00008000
+#define TLBnPS_64M		0x00010000
+#define TLBnPS_128M		0x00020000
+#define TLBnPS_256M		0x00040000
+#define TLBnPS_512M		0x00080000
+#define TLBnPS_1G		0x00100000
+#define TLBnPS_2G		0x00200000
+#define TLBnPS_4G		0x00400000
+#define TLBnPS_8G		0x00800000
+#define TLBnPS_16G		0x01000000
+#define TLBnPS_32G		0x02000000
+#define TLBnPS_64G		0x04000000
+#define TLBnPS_128G		0x08000000
+#define TLBnPS_256G		0x10000000
+
+/* tlbilx action encoding */
+#define TLBILX_T_ALL			0
+#define TLBILX_T_TID			1
+#define TLBILX_T_FULLMATCH		3
+#define TLBILX_T_CLASS0			4
+#define TLBILX_T_CLASS1			5
+#define TLBILX_T_CLASS2			6
+#define TLBILX_T_CLASS3			7
 
 #ifndef __ASSEMBLY__
 
-- 
cgit v1.2.3


From a245067e204f69c69abf92d94fc45ec65bf1f07e Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Thu, 23 Jul 2009 23:15:16 +0000
Subject: powerpc/mm: Add support for early ioremap on non-hash 64-bit
 processors

This adds some code to do early ioremap's using page tables instead of
bolting entries in the hash table. This will be used by the upcoming
64-bits BookE port.

The patch also changes the test for early vs. late ioremap to use
slab_is_available() instead of our old hackish mem_init_done.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/mm/pgtable_64.c | 59 ++++++++++++++++++++++++++++++++++++++++----
 1 file changed, 54 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/mm/pgtable_64.c b/arch/powerpc/mm/pgtable_64.c
index bfa7db6b2fd..93ed1a3c872 100644
--- a/arch/powerpc/mm/pgtable_64.c
+++ b/arch/powerpc/mm/pgtable_64.c
@@ -33,6 +33,8 @@
 #include <linux/stddef.h>
 #include <linux/vmalloc.h>
 #include <linux/init.h>
+#include <linux/bootmem.h>
+#include <linux/lmb.h>
 
 #include <asm/pgalloc.h>
 #include <asm/page.h>
@@ -55,19 +57,36 @@
 
 unsigned long ioremap_bot = IOREMAP_BASE;
 
+
+#ifdef CONFIG_PPC_MMU_NOHASH
+static void *early_alloc_pgtable(unsigned long size)
+{
+	void *pt;
+
+	if (init_bootmem_done)
+		pt = __alloc_bootmem(size, size, __pa(MAX_DMA_ADDRESS));
+	else
+		pt = __va(lmb_alloc_base(size, size,
+					 __pa(MAX_DMA_ADDRESS)));
+	memset(pt, 0, size);
+
+	return pt;
+}
+#endif /* CONFIG_PPC_MMU_NOHASH */
+
 /*
- * map_io_page currently only called by __ioremap
- * map_io_page adds an entry to the ioremap page table
+ * map_kernel_page currently only called by __ioremap
+ * map_kernel_page adds an entry to the ioremap page table
  * and adds an entry to the HPT, possibly bolting it
  */
-static int map_io_page(unsigned long ea, unsigned long pa, int flags)
+static int map_kernel_page(unsigned long ea, unsigned long pa, int flags)
 {
 	pgd_t *pgdp;
 	pud_t *pudp;
 	pmd_t *pmdp;
 	pte_t *ptep;
 
-	if (mem_init_done) {
+	if (slab_is_available()) {
 		pgdp = pgd_offset_k(ea);
 		pudp = pud_alloc(&init_mm, pgdp, ea);
 		if (!pudp)
@@ -81,6 +100,35 @@ static int map_io_page(unsigned long ea, unsigned long pa, int flags)
 		set_pte_at(&init_mm, ea, ptep, pfn_pte(pa >> PAGE_SHIFT,
 							  __pgprot(flags)));
 	} else {
+#ifdef CONFIG_PPC_MMU_NOHASH
+		/* Warning ! This will blow up if bootmem is not initialized
+		 * which our ppc64 code is keen to do that, we'll need to
+		 * fix it and/or be more careful
+		 */
+		pgdp = pgd_offset_k(ea);
+#ifdef PUD_TABLE_SIZE
+		if (pgd_none(*pgdp)) {
+			pudp = early_alloc_pgtable(PUD_TABLE_SIZE);
+			BUG_ON(pudp == NULL);
+			pgd_populate(&init_mm, pgdp, pudp);
+		}
+#endif /* PUD_TABLE_SIZE */
+		pudp = pud_offset(pgdp, ea);
+		if (pud_none(*pudp)) {
+			pmdp = early_alloc_pgtable(PMD_TABLE_SIZE);
+			BUG_ON(pmdp == NULL);
+			pud_populate(&init_mm, pudp, pmdp);
+		}
+		pmdp = pmd_offset(pudp, ea);
+		if (!pmd_present(*pmdp)) {
+			ptep = early_alloc_pgtable(PAGE_SIZE);
+			BUG_ON(ptep == NULL);
+			pmd_populate_kernel(&init_mm, pmdp, ptep);
+		}
+		ptep = pte_offset_kernel(pmdp, ea);
+		set_pte_at(&init_mm, ea, ptep, pfn_pte(pa >> PAGE_SHIFT,
+							  __pgprot(flags)));
+#else /* CONFIG_PPC_MMU_NOHASH */
 		/*
 		 * If the mm subsystem is not fully up, we cannot create a
 		 * linux page table entry for this mapping.  Simply bolt an
@@ -93,6 +141,7 @@ static int map_io_page(unsigned long ea, unsigned long pa, int flags)
 			       "memory at %016lx !\n", pa);
 			return -ENOMEM;
 		}
+#endif /* !CONFIG_PPC_MMU_NOHASH */
 	}
 	return 0;
 }
@@ -124,7 +173,7 @@ void __iomem * __ioremap_at(phys_addr_t pa, void *ea, unsigned long size,
 	WARN_ON(size & ~PAGE_MASK);
 
 	for (i = 0; i < size; i += PAGE_SIZE)
-		if (map_io_page((unsigned long)ea+i, pa+i, flags))
+		if (map_kernel_page((unsigned long)ea+i, pa+i, flags))
 			return NULL;
 
 	return (void __iomem *)ea;
-- 
cgit v1.2.3


From 44c58ccc8dc25f78a4f641901f17092c93dd0458 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Thu, 23 Jul 2009 23:15:20 +0000
Subject: powerpc: Modify some ppc_asm.h macros to accomodate 64-bits Book3E

The way I intend to use tophys/tovirt on 64-bit BookE is different
from the "trick" that we currently play for 32-bit BookE so change
the condition of definition of these macros to make it so.

Also, make sure we only use rfid and mtmsrd instead of rfi and mtmsr
for 64-bit server processors, not all 64-bit processors.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/include/asm/ppc_asm.h | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/ppc_asm.h b/arch/powerpc/include/asm/ppc_asm.h
index f9729529c20..dfae6e916df 100644
--- a/arch/powerpc/include/asm/ppc_asm.h
+++ b/arch/powerpc/include/asm/ppc_asm.h
@@ -375,8 +375,15 @@ END_FTR_SECTION_IFCLR(CPU_FTR_601)
 #define PPC440EP_ERR42
 #endif
 
-
-#if defined(CONFIG_BOOKE)
+/*
+ * toreal/fromreal/tophys/tovirt macros. 32-bit BookE makes them
+ * keep the address intact to be compatible with code shared with
+ * 32-bit classic.
+ *
+ * On the other hand, I find it useful to have them behave as expected
+ * by their name (ie always do the addition) on 64-bit BookE
+ */
+#if defined(CONFIG_BOOKE) && !defined(CONFIG_PPC64)
 #define toreal(rd)
 #define fromreal(rd)
 
@@ -426,10 +433,9 @@ END_FTR_SECTION_IFCLR(CPU_FTR_601)
 	.previous
 #endif
 
-#ifdef CONFIG_PPC64
+#ifdef CONFIG_PPC_BOOK3S_64
 #define RFI		rfid
 #define MTMSRD(r)	mtmsrd	r
-
 #else
 #define FIX_SRR1(ra, rb)
 #ifndef CONFIG_40x
-- 
cgit v1.2.3


From d4e167da4cb60910f6ac305aee03714937f70b71 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Thu, 23 Jul 2009 23:15:24 +0000
Subject: powerpc/mm: Make low level TLB flush ops on BookE take additional
 args

We need to pass down whether the page is direct or indirect and we'll
need to pass the page size to _tlbil_va and _tlbivax_bcast

We also add a new low level _tlbil_pid_noind() which does a TLB flush
by PID but avoids flushing indirect entries if possible

This implements those new prototypes but defines them with inlines
or macros so that no additional arguments are actually passed on current
processors.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/tlbflush.h | 11 ++++++++--
 arch/powerpc/mm/mmu_decl.h          | 16 +++++++++++---
 arch/powerpc/mm/tlb_nohash.c        | 42 +++++++++++++++++++++++++++----------
 arch/powerpc/mm/tlb_nohash_low.S    |  6 +++---
 4 files changed, 56 insertions(+), 19 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/tlbflush.h b/arch/powerpc/include/asm/tlbflush.h
index abbe3419d1d..d50a380b2b6 100644
--- a/arch/powerpc/include/asm/tlbflush.h
+++ b/arch/powerpc/include/asm/tlbflush.h
@@ -6,7 +6,7 @@
  *
  *  - flush_tlb_mm(mm) flushes the specified mm context TLB's
  *  - flush_tlb_page(vma, vmaddr) flushes one page
- *  - local_flush_tlb_mm(mm) flushes the specified mm context on
+ *  - local_flush_tlb_mm(mm, full) flushes the specified mm context on
  *                           the local processor
  *  - local_flush_tlb_page(vma, vmaddr) flushes one page on the local processor
  *  - flush_tlb_page_nohash(vma, vmaddr) flushes one page if SW loaded TLB
@@ -29,7 +29,8 @@
  * specific tlbie's
  */
 
-#include <linux/mm.h>
+struct vm_area_struct;
+struct mm_struct;
 
 #define MMU_NO_CONTEXT      	((unsigned int)-1)
 
@@ -40,12 +41,18 @@ extern void flush_tlb_kernel_range(unsigned long start, unsigned long end);
 extern void local_flush_tlb_mm(struct mm_struct *mm);
 extern void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr);
 
+extern void __local_flush_tlb_page(struct mm_struct *mm, unsigned long vmaddr,
+				   int tsize, int ind);
+
 #ifdef CONFIG_SMP
 extern void flush_tlb_mm(struct mm_struct *mm);
 extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr);
+extern void __flush_tlb_page(struct mm_struct *mm, unsigned long vmaddr,
+			     int tsize, int ind);
 #else
 #define flush_tlb_mm(mm)		local_flush_tlb_mm(mm)
 #define flush_tlb_page(vma,addr)	local_flush_tlb_page(vma,addr)
+#define __flush_tlb_page(mm,addr,p,i)	__local_flush_tlb_page(mm,addr,p,i)
 #endif
 #define flush_tlb_page_nohash(vma,addr)	flush_tlb_page(vma,addr)
 
diff --git a/arch/powerpc/mm/mmu_decl.h b/arch/powerpc/mm/mmu_decl.h
index d1f9c62dc17..3871dceee2d 100644
--- a/arch/powerpc/mm/mmu_decl.h
+++ b/arch/powerpc/mm/mmu_decl.h
@@ -36,21 +36,30 @@ static inline void _tlbil_pid(unsigned int pid)
 {
 	asm volatile ("sync; tlbia; isync" : : : "memory");
 }
+#define _tlbil_pid_noind(pid)	_tlbil_pid(pid)
+
 #else /* CONFIG_40x || CONFIG_8xx */
 extern void _tlbil_all(void);
 extern void _tlbil_pid(unsigned int pid);
+#define _tlbil_pid_noind(pid)	_tlbil_pid(pid)
 #endif /* !(CONFIG_40x || CONFIG_8xx) */
 
 /*
  * On 8xx, we directly inline tlbie, on others, it's extern
  */
 #ifdef CONFIG_8xx
-static inline void _tlbil_va(unsigned long address, unsigned int pid)
+static inline void _tlbil_va(unsigned long address, unsigned int pid,
+			     unsigned int tsize, unsigned int ind)
 {
 	asm volatile ("tlbie %0; sync" : : "r" (address) : "memory");
 }
 #else /* CONFIG_8xx */
-extern void _tlbil_va(unsigned long address, unsigned int pid);
+extern void __tlbil_va(unsigned long address, unsigned int pid);
+static inline void _tlbil_va(unsigned long address, unsigned int pid,
+			     unsigned int tsize, unsigned int ind)
+{
+	__tlbil_va(address, pid);
+}
 #endif /* CONIFG_8xx */
 
 /*
@@ -58,7 +67,8 @@ extern void _tlbil_va(unsigned long address, unsigned int pid);
  * implementation. When that becomes the case, this will be
  * an extern.
  */
-static inline void _tlbivax_bcast(unsigned long address, unsigned int pid)
+static inline void _tlbivax_bcast(unsigned long address, unsigned int pid,
+				   unsigned int tsize, unsigned int ind)
 {
 	BUG();
 }
diff --git a/arch/powerpc/mm/tlb_nohash.c b/arch/powerpc/mm/tlb_nohash.c
index d908e75cc3b..761e8882416 100644
--- a/arch/powerpc/mm/tlb_nohash.c
+++ b/arch/powerpc/mm/tlb_nohash.c
@@ -67,18 +67,24 @@ void local_flush_tlb_mm(struct mm_struct *mm)
 }
 EXPORT_SYMBOL(local_flush_tlb_mm);
 
-void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr)
+void __local_flush_tlb_page(struct mm_struct *mm, unsigned long vmaddr,
+			    int tsize, int ind)
 {
 	unsigned int pid;
 
 	preempt_disable();
-	pid = vma ? vma->vm_mm->context.id : 0;
+	pid = mm ? mm->context.id : 0;
 	if (pid != MMU_NO_CONTEXT)
-		_tlbil_va(vmaddr, pid);
+		_tlbil_va(vmaddr, pid, tsize, ind);
 	preempt_enable();
 }
-EXPORT_SYMBOL(local_flush_tlb_page);
 
+void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr)
+{
+	__local_flush_tlb_page(vma ? vma->vm_mm : NULL, vmaddr,
+			       0 /* tsize unused for now */, 0);
+}
+EXPORT_SYMBOL(local_flush_tlb_page);
 
 /*
  * And here are the SMP non-local implementations
@@ -96,6 +102,8 @@ static int mm_is_core_local(struct mm_struct *mm)
 struct tlb_flush_param {
 	unsigned long addr;
 	unsigned int pid;
+	unsigned int tsize;
+	unsigned int ind;
 };
 
 static void do_flush_tlb_mm_ipi(void *param)
@@ -109,7 +117,7 @@ static void do_flush_tlb_page_ipi(void *param)
 {
 	struct tlb_flush_param *p = param;
 
-	_tlbil_va(p->addr, p->pid);
+	_tlbil_va(p->addr, p->pid, p->tsize, p->ind);
 }
 
 
@@ -149,37 +157,49 @@ void flush_tlb_mm(struct mm_struct *mm)
 }
 EXPORT_SYMBOL(flush_tlb_mm);
 
-void flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr)
+void __flush_tlb_page(struct mm_struct *mm, unsigned long vmaddr,
+		      int tsize, int ind)
 {
 	struct cpumask *cpu_mask;
 	unsigned int pid;
 
 	preempt_disable();
-	pid = vma ? vma->vm_mm->context.id : 0;
+	pid = mm ? mm->context.id : 0;
 	if (unlikely(pid == MMU_NO_CONTEXT))
 		goto bail;
-	cpu_mask = mm_cpumask(vma->vm_mm);
+	cpu_mask = mm_cpumask(mm);
 	if (!mm_is_core_local(mm)) {
 		/* If broadcast tlbivax is supported, use it */
 		if (mmu_has_feature(MMU_FTR_USE_TLBIVAX_BCAST)) {
 			int lock = mmu_has_feature(MMU_FTR_LOCK_BCAST_INVAL);
 			if (lock)
 				spin_lock(&tlbivax_lock);
-			_tlbivax_bcast(vmaddr, pid);
+			_tlbivax_bcast(vmaddr, pid, tsize, ind);
 			if (lock)
 				spin_unlock(&tlbivax_lock);
 			goto bail;
 		} else {
-			struct tlb_flush_param p = { .pid = pid, .addr = vmaddr };
+			struct tlb_flush_param p = {
+				.pid = pid,
+				.addr = vmaddr,
+				.tsize = tsize,
+				.ind = ind,
+			};
 			/* Ignores smp_processor_id() even if set in cpu_mask */
 			smp_call_function_many(cpu_mask,
 					       do_flush_tlb_page_ipi, &p, 1);
 		}
 	}
-	_tlbil_va(vmaddr, pid);
+	_tlbil_va(vmaddr, pid, tsize, ind);
  bail:
 	preempt_enable();
 }
+
+void flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr)
+{
+	__flush_tlb_page(vma ? vma->vm_mm : NULL, vmaddr,
+			 0 /* tsize unused for now */, 0);
+}
 EXPORT_SYMBOL(flush_tlb_page);
 
 #endif /* CONFIG_SMP */
diff --git a/arch/powerpc/mm/tlb_nohash_low.S b/arch/powerpc/mm/tlb_nohash_low.S
index 3037911279b..c7d89a0adba 100644
--- a/arch/powerpc/mm/tlb_nohash_low.S
+++ b/arch/powerpc/mm/tlb_nohash_low.S
@@ -39,7 +39,7 @@
 /*
  * 40x implementation needs only tlbil_va
  */
-_GLOBAL(_tlbil_va)
+_GLOBAL(__tlbil_va)
 	/* We run the search with interrupts disabled because we have to change
 	 * the PID and I don't want to preempt when that happens.
 	 */
@@ -71,7 +71,7 @@ _GLOBAL(_tlbil_va)
  * 440 implementation uses tlbsx/we for tlbil_va and a full sweep
  * of the TLB for everything else.
  */
-_GLOBAL(_tlbil_va)
+_GLOBAL(__tlbil_va)
 	mfspr	r5,SPRN_MMUCR
 	rlwimi	r5,r4,0,24,31			/* Set TID */
 
@@ -170,7 +170,7 @@ ALT_MMU_FTR_SECTION_END_IFSET(MMU_FTR_USE_TLBILX)
  * Flush MMU TLB for a particular address, but only on the local processor
  * (no broadcast)
  */
-_GLOBAL(_tlbil_va)
+_GLOBAL(__tlbil_va)
 	mfmsr	r10
 	wrteei	0
 	slwi	r4,r4,16
-- 
cgit v1.2.3


From 6f0ef0f505af1ce6e9756087a9d4cc3778bae8c6 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Thu, 23 Jul 2009 23:15:26 +0000
Subject: powerpc/mm: Call mmu_context_init() from ppc64

Our 64-bit hash context handling has no init function, but 64-bit Book3E
will use the common mmu_context_nohash.c code which does, so define an
empty inline mmu_context_init() for 64-bit server and call it from
our 64-bit setup_arch()

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/include/asm/mmu_context.h | 7 ++++++-
 arch/powerpc/kernel/setup_64.c         | 4 ++++
 2 files changed, 10 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/mmu_context.h b/arch/powerpc/include/asm/mmu_context.h
index b7063669f97..8dffed31701 100644
--- a/arch/powerpc/include/asm/mmu_context.h
+++ b/arch/powerpc/include/asm/mmu_context.h
@@ -14,7 +14,6 @@
 /*
  * Most if the context management is out of line
  */
-extern void mmu_context_init(void);
 extern int init_new_context(struct task_struct *tsk, struct mm_struct *mm);
 extern void destroy_context(struct mm_struct *mm);
 
@@ -23,6 +22,12 @@ extern void switch_stab(struct task_struct *tsk, struct mm_struct *mm);
 extern void switch_slb(struct task_struct *tsk, struct mm_struct *mm);
 extern void set_context(unsigned long id, pgd_t *pgd);
 
+#ifdef CONFIG_PPC_BOOK3S_64
+static inline void mmu_context_init(void) { }
+#else
+extern void mmu_context_init(void);
+#endif
+
 /*
  * switch_mm is the entry point called from the architecture independent
  * code in kernel/sched.c
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 91b89b8d63d..325dc5b2e62 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -534,6 +534,10 @@ void __init setup_arch(char **cmdline_p)
 #endif
 
 	paging_init();
+
+	/* Initialize the MMU context management stuff */
+	mmu_context_init();
+
 	ppc64_boot_msg(0x15, "Setup Done");
 }
 
-- 
cgit v1.2.3


From 747bea91b764aefd59091ebff80f182282f1d23c Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Thu, 23 Jul 2009 23:15:27 +0000
Subject: powerpc: Clean ifdef usage in copy_thread()

Currently, a single ifdef covers SLB related bits and more generic ppc64
related bits, split this in two separate ifdef's since 64-bit BookE will
need one but not the other.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/process.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 892a9f2e6d7..678ff132e8b 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -664,6 +664,7 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
 		sp_vsid |= SLB_VSID_KERNEL | llp;
 		p->thread.ksp_vsid = sp_vsid;
 	}
+#endif /* CONFIG_PPC_STD_MMU_64 */
 
 	/*
 	 * The PPC64 ABI makes use of a TOC to contain function 
@@ -671,6 +672,7 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
 	 * to the TOC entry.  The first entry is a pointer to the actual
 	 * function.
  	 */
+#ifdef CONFIG_PPC64
 	kregs->nip = *((unsigned long *)ret_from_fork);
 #else
 	kregs->nip = (unsigned long)ret_from_fork;
-- 
cgit v1.2.3


From cf54dc7cd4f9aab55cd3e1794b0b74c3c88cd1a0 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Thu, 23 Jul 2009 23:15:28 +0000
Subject: powerpc: Move definitions of secondary CPU spinloop to header file

Those definitions are currently declared extern in the .c file where
they are used, move them to a header file instead.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/smp.h            | 9 +++++++++
 arch/powerpc/kernel/prom_init.c           | 4 ----
 arch/powerpc/kernel/setup_64.c            | 3 ---
 arch/powerpc/platforms/85xx/smp.c         | 1 -
 arch/powerpc/platforms/86xx/mpc86xx_smp.c | 1 -
 arch/powerpc/platforms/cell/smp.c         | 2 --
 arch/powerpc/platforms/pseries/smp.c      | 2 --
 7 files changed, 9 insertions(+), 13 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/smp.h b/arch/powerpc/include/asm/smp.h
index c25f73d1d84..e782f43ee66 100644
--- a/arch/powerpc/include/asm/smp.h
+++ b/arch/powerpc/include/asm/smp.h
@@ -148,6 +148,15 @@ extern struct smp_ops_t *smp_ops;
 extern void arch_send_call_function_single_ipi(int cpu);
 extern void arch_send_call_function_ipi(cpumask_t mask);
 
+/* Definitions relative to the secondary CPU spin loop
+ * and entry point. Not all of them exist on both 32 and
+ * 64-bit but defining them all here doesn't harm
+ */
+extern void generic_secondary_smp_init(void);
+extern unsigned long __secondary_hold_spinloop;
+extern unsigned long __secondary_hold_acknowledge;
+extern char __secondary_hold;
+
 #endif /* __ASSEMBLY__ */
 
 #endif /* __KERNEL__ */
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index a538824616f..d942404779c 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -1259,10 +1259,6 @@ static void __init prom_initialize_tce_table(void)
  *
  * -- Cort
  */
-extern char __secondary_hold;
-extern unsigned long __secondary_hold_spinloop;
-extern unsigned long __secondary_hold_acknowledge;
-
 /*
  * We want to reference the copy of __secondary_hold_* in the
  * 0 - 0x100 address range
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 325dc5b2e62..a6b6c4c9ae4 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -230,9 +230,6 @@ void early_setup_secondary(void)
 #endif /* CONFIG_SMP */
 
 #if defined(CONFIG_SMP) || defined(CONFIG_KEXEC)
-extern unsigned long __secondary_hold_spinloop;
-extern void generic_secondary_smp_init(void);
-
 void smp_release_cpus(void)
 {
 	unsigned long *ptr;
diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c
index 62c592ede64..9f526ba31c1 100644
--- a/arch/powerpc/platforms/85xx/smp.c
+++ b/arch/powerpc/platforms/85xx/smp.c
@@ -25,7 +25,6 @@
 
 #include <sysdev/fsl_soc.h>
 
-extern volatile unsigned long __secondary_hold_acknowledge;
 extern void __early_start(void);
 
 #define BOOT_ENTRY_ADDR_UPPER	0
diff --git a/arch/powerpc/platforms/86xx/mpc86xx_smp.c b/arch/powerpc/platforms/86xx/mpc86xx_smp.c
index d84bbb508ee..eacea0e3fcc 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx_smp.c
+++ b/arch/powerpc/platforms/86xx/mpc86xx_smp.c
@@ -27,7 +27,6 @@
 #include "mpc86xx.h"
 
 extern void __secondary_start_mpc86xx(void);
-extern unsigned long __secondary_hold_acknowledge;
 
 #define MCM_PORT_CONFIG_OFFSET	0x10
 
diff --git a/arch/powerpc/platforms/cell/smp.c b/arch/powerpc/platforms/cell/smp.c
index bc97fada48c..f774530075b 100644
--- a/arch/powerpc/platforms/cell/smp.c
+++ b/arch/powerpc/platforms/cell/smp.c
@@ -58,8 +58,6 @@
  */
 static cpumask_t of_spin_map;
 
-extern void generic_secondary_smp_init(unsigned long);
-
 /**
  * smp_startup_cpu() - start the given cpu
  *
diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c
index 1f8f6cfb94f..440000cc713 100644
--- a/arch/powerpc/platforms/pseries/smp.c
+++ b/arch/powerpc/platforms/pseries/smp.c
@@ -56,8 +56,6 @@
  */
 static cpumask_t of_spin_map;
 
-extern void generic_secondary_smp_init(unsigned long);
-
 /**
  * smp_startup_cpu() - start the given cpu
  *
-- 
cgit v1.2.3


From c7cc58a1ad8dfe3c199d3b6ce50412b86dd3edaf Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Thu, 23 Jul 2009 23:15:28 +0000
Subject: powerpc/mm: Rework & cleanup page table freeing code path

That patch used to just add a hook to page table flushing but
pulling that string brought out a whole bunch of issues, so it
now does that and more:

 - We now make the RCU batching of page freeing SMP only, as I
believe it was intended initially. We make a few more things compile
to nothing on !CONFIG_SMP

 - Some macros are turned into functions, though that forced me to
out of line a few stuffs due to unsolvable include depenencies,
however it's probably better that way anyway, it's not -that-
critical code path.

 - 32-bit didn't call pte_free_finish() on tlb_flush() which means
that it wouldn't push out the batch to RCU for delayed freeing when
a bunch of page tables have been freed, they would just stay in there
until the batch gets full.

64-bit BookE will use that hook to maintain the virtually linear
page tables or the indirect entries in the TLB when using the
HW loader.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/pgalloc.h | 39 +++++++++++++++++++++++++++-----------
 arch/powerpc/include/asm/tlb.h     | 38 +++----------------------------------
 arch/powerpc/mm/pgtable.c          | 10 ++++++++++
 arch/powerpc/mm/tlb_hash32.c       |  3 +++
 arch/powerpc/mm/tlb_hash64.c       | 15 +++++++++++++++
 arch/powerpc/mm/tlb_nohash.c       |  8 ++++++++
 6 files changed, 67 insertions(+), 46 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/pgalloc.h b/arch/powerpc/include/asm/pgalloc.h
index 1730e5e298d..34b080671f0 100644
--- a/arch/powerpc/include/asm/pgalloc.h
+++ b/arch/powerpc/include/asm/pgalloc.h
@@ -4,6 +4,15 @@
 
 #include <linux/mm.h>
 
+#ifdef CONFIG_PPC_BOOK3E
+extern void tlb_flush_pgtable(struct mmu_gather *tlb, unsigned long address);
+#else /* CONFIG_PPC_BOOK3E */
+static inline void tlb_flush_pgtable(struct mmu_gather *tlb,
+				     unsigned long address)
+{
+}
+#endif /* !CONFIG_PPC_BOOK3E */
+
 static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
 {
 	free_page((unsigned long)pte);
@@ -35,19 +44,27 @@ static inline pgtable_free_t pgtable_free_cache(void *p, int cachenum,
 #include <asm/pgalloc-32.h>
 #endif
 
-extern void pgtable_free_tlb(struct mmu_gather *tlb, pgtable_free_t pgf);
-
 #ifdef CONFIG_SMP
-#define __pte_free_tlb(tlb,ptepage,address)		\
-do { \
-	pgtable_page_dtor(ptepage); \
-	pgtable_free_tlb(tlb, pgtable_free_cache(page_address(ptepage), \
-					PTE_NONCACHE_NUM, PTE_TABLE_SIZE-1)); \
-} while (0)
-#else
-#define __pte_free_tlb(tlb, pte, address)	pte_free((tlb)->mm, (pte))
-#endif
+extern void pgtable_free_tlb(struct mmu_gather *tlb, pgtable_free_t pgf);
+extern void pte_free_finish(void);
+#else /* CONFIG_SMP */
+static inline void pgtable_free_tlb(struct mmu_gather *tlb, pgtable_free_t pgf)
+{
+	pgtable_free(pgf);
+}
+static inline void pte_free_finish(void) { }
+#endif /* !CONFIG_SMP */
 
+static inline void __pte_free_tlb(struct mmu_gather *tlb, struct page *ptepage,
+				  unsigned long address)
+{
+	pgtable_free_t pgf = pgtable_free_cache(page_address(ptepage),
+						PTE_NONCACHE_NUM,
+						PTE_TABLE_SIZE-1);
+	tlb_flush_pgtable(tlb, address);
+	pgtable_page_dtor(ptepage);
+	pgtable_free_tlb(tlb, pgf);
+}
 
 #endif /* __KERNEL__ */
 #endif /* _ASM_POWERPC_PGALLOC_H */
diff --git a/arch/powerpc/include/asm/tlb.h b/arch/powerpc/include/asm/tlb.h
index e20ff7541f3..e2b428b0f7b 100644
--- a/arch/powerpc/include/asm/tlb.h
+++ b/arch/powerpc/include/asm/tlb.h
@@ -25,57 +25,25 @@
 
 #include <linux/pagemap.h>
 
-struct mmu_gather;
-
 #define tlb_start_vma(tlb, vma)	do { } while (0)
 #define tlb_end_vma(tlb, vma)	do { } while (0)
 
-#if !defined(CONFIG_PPC_STD_MMU)
-
-#define tlb_flush(tlb)			flush_tlb_mm((tlb)->mm)
-
-#elif defined(__powerpc64__)
-
-extern void pte_free_finish(void);
-
-static inline void tlb_flush(struct mmu_gather *tlb)
-{
-	struct ppc64_tlb_batch *tlbbatch = &__get_cpu_var(ppc64_tlb_batch);
-
-	/* If there's a TLB batch pending, then we must flush it because the
-	 * pages are going to be freed and we really don't want to have a CPU
-	 * access a freed page because it has a stale TLB
-	 */
-	if (tlbbatch->index)
-		__flush_tlb_pending(tlbbatch);
-
-	pte_free_finish();
-}
-
-#else
-
 extern void tlb_flush(struct mmu_gather *tlb);
 
-#endif
-
 /* Get the generic bits... */
 #include <asm-generic/tlb.h>
 
-#if !defined(CONFIG_PPC_STD_MMU) || defined(__powerpc64__)
-
-#define __tlb_remove_tlb_entry(tlb, pte, address) do { } while (0)
-
-#else
 extern void flush_hash_entry(struct mm_struct *mm, pte_t *ptep,
 			     unsigned long address);
 
 static inline void __tlb_remove_tlb_entry(struct mmu_gather *tlb, pte_t *ptep,
-					unsigned long address)
+					  unsigned long address)
 {
+#ifdef CONFIG_PPC_STD_MMU_32
 	if (pte_val(*ptep) & _PAGE_HASHPTE)
 		flush_hash_entry(tlb->mm, ptep, address);
+#endif
 }
 
-#endif
 #endif /* __KERNEL__ */
 #endif /* __ASM_POWERPC_TLB_H */
diff --git a/arch/powerpc/mm/pgtable.c b/arch/powerpc/mm/pgtable.c
index 627767d6169..a65979a5f75 100644
--- a/arch/powerpc/mm/pgtable.c
+++ b/arch/powerpc/mm/pgtable.c
@@ -30,6 +30,14 @@
 #include <asm/tlbflush.h>
 #include <asm/tlb.h>
 
+#ifdef CONFIG_SMP
+
+/*
+ * Handle batching of page table freeing on SMP. Page tables are
+ * queued up and send to be freed later by RCU in order to avoid
+ * freeing a page table page that is being walked without locks
+ */
+
 static DEFINE_PER_CPU(struct pte_freelist_batch *, pte_freelist_cur);
 static unsigned long pte_freelist_forced_free;
 
@@ -116,6 +124,8 @@ void pte_free_finish(void)
 	*batchp = NULL;
 }
 
+#endif /* CONFIG_SMP */
+
 /*
  * Handle i/d cache flushing, called from set_pte_at() or ptep_set_access_flags()
  */
diff --git a/arch/powerpc/mm/tlb_hash32.c b/arch/powerpc/mm/tlb_hash32.c
index 65190587a36..8aaa8b7eb32 100644
--- a/arch/powerpc/mm/tlb_hash32.c
+++ b/arch/powerpc/mm/tlb_hash32.c
@@ -71,6 +71,9 @@ void tlb_flush(struct mmu_gather *tlb)
 		 */
 		_tlbia();
 	}
+
+	/* Push out batch of freed page tables */
+	pte_free_finish();
 }
 
 /*
diff --git a/arch/powerpc/mm/tlb_hash64.c b/arch/powerpc/mm/tlb_hash64.c
index 937eb90677d..8e35a606693 100644
--- a/arch/powerpc/mm/tlb_hash64.c
+++ b/arch/powerpc/mm/tlb_hash64.c
@@ -154,6 +154,21 @@ void __flush_tlb_pending(struct ppc64_tlb_batch *batch)
 	batch->index = 0;
 }
 
+void tlb_flush(struct mmu_gather *tlb)
+{
+	struct ppc64_tlb_batch *tlbbatch = &__get_cpu_var(ppc64_tlb_batch);
+
+	/* If there's a TLB batch pending, then we must flush it because the
+	 * pages are going to be freed and we really don't want to have a CPU
+	 * access a freed page because it has a stale TLB
+	 */
+	if (tlbbatch->index)
+		__flush_tlb_pending(tlbbatch);
+
+	/* Push out batch of freed page tables */
+	pte_free_finish();
+}
+
 /**
  * __flush_hash_table_range - Flush all HPTEs for a given address range
  *                            from the hash table (and the TLB). But keeps
diff --git a/arch/powerpc/mm/tlb_nohash.c b/arch/powerpc/mm/tlb_nohash.c
index 761e8882416..6b43fc49f10 100644
--- a/arch/powerpc/mm/tlb_nohash.c
+++ b/arch/powerpc/mm/tlb_nohash.c
@@ -233,3 +233,11 @@ void flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
 	flush_tlb_mm(vma->vm_mm);
 }
 EXPORT_SYMBOL(flush_tlb_range);
+
+void tlb_flush(struct mmu_gather *tlb)
+{
+	flush_tlb_mm(tlb->mm);
+
+	/* Push out batch of freed page tables */
+	pte_free_finish();
+}
-- 
cgit v1.2.3


From 0257c99cdfaca53a881339e1cbca638c61569b05 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Thu, 23 Jul 2009 23:15:34 +0000
Subject: powerpc: Add SPR definitions for new 64-bit BookE

This adds various SPRs defined on 64-bit BookE, along with changes
to the definition of the base MSR values to add the values needed
for 64-bit Book3E.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/reg.h       | 10 +++------
 arch/powerpc/include/asm/reg_booke.h | 42 +++++++++++++++++++++++++++++++++---
 2 files changed, 42 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index 2cedbb42761..c8715331e1b 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -98,19 +98,15 @@
 #define MSR_RI		__MASK(MSR_RI_LG)	/* Recoverable Exception */
 #define MSR_LE		__MASK(MSR_LE_LG)	/* Little Endian */
 
-#ifdef CONFIG_PPC64
+#if defined(CONFIG_PPC_BOOK3S_64)
+/* Server variant */
 #define MSR_		MSR_ME | MSR_RI | MSR_IR | MSR_DR | MSR_ISF |MSR_HV
 #define MSR_KERNEL      MSR_ | MSR_SF
-
 #define MSR_USER32	MSR_ | MSR_PR | MSR_EE
 #define MSR_USER64	MSR_USER32 | MSR_SF
-
-#else /* 32-bit */
+#elif defined(CONFIG_PPC_BOOK3S_32) || defined(CONFIG_8xx)
 /* Default MSR for kernel mode. */
-#ifndef MSR_KERNEL	/* reg_booke.h also defines this */
 #define MSR_KERNEL	(MSR_ME|MSR_RI|MSR_IR|MSR_DR)
-#endif
-
 #define MSR_USER	(MSR_KERNEL|MSR_PR|MSR_EE)
 #endif
 
diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h
index 6bcf364cbb2..2c9c706e644 100644
--- a/arch/powerpc/include/asm/reg_booke.h
+++ b/arch/powerpc/include/asm/reg_booke.h
@@ -18,18 +18,26 @@
 #define MSR_IS		MSR_IR	/* Instruction Space */
 #define MSR_DS		MSR_DR	/* Data Space */
 #define MSR_PMM		(1<<2)	/* Performance monitor mark bit */
+#define MSR_CM		(1<<31) /* Computation Mode (0=32-bit, 1=64-bit) */
 
-/* Default MSR for kernel mode. */
-#if defined (CONFIG_40x)
+#if defined(CONFIG_PPC_BOOK3E_64)
+#define MSR_		MSR_ME | MSR_CE
+#define MSR_KERNEL      MSR_ | MSR_CM
+#define MSR_USER32	MSR_ | MSR_PR | MSR_EE
+#define MSR_USER64	MSR_USER32 | MSR_CM
+#elif defined (CONFIG_40x)
 #define MSR_KERNEL	(MSR_ME|MSR_RI|MSR_IR|MSR_DR|MSR_CE)
-#elif defined(CONFIG_BOOKE)
+#define MSR_USER	(MSR_KERNEL|MSR_PR|MSR_EE)
+#else
 #define MSR_KERNEL	(MSR_ME|MSR_RI|MSR_CE)
+#define MSR_USER	(MSR_KERNEL|MSR_PR|MSR_EE)
 #endif
 
 /* Special Purpose Registers (SPRNs)*/
 #define SPRN_DECAR	0x036	/* Decrementer Auto Reload Register */
 #define SPRN_IVPR	0x03F	/* Interrupt Vector Prefix Register */
 #define SPRN_USPRG0	0x100	/* User Special Purpose Register General 0 */
+#define SPRN_SPRG3R	0x103	/* Special Purpose Register General 3 Read */
 #define SPRN_SPRG4R	0x104	/* Special Purpose Register General 4 Read */
 #define SPRN_SPRG5R	0x105	/* Special Purpose Register General 5 Read */
 #define SPRN_SPRG6R	0x106	/* Special Purpose Register General 6 Read */
@@ -38,11 +46,18 @@
 #define SPRN_SPRG5W	0x115	/* Special Purpose Register General 5 Write */
 #define SPRN_SPRG6W	0x116	/* Special Purpose Register General 6 Write */
 #define SPRN_SPRG7W	0x117	/* Special Purpose Register General 7 Write */
+#define SPRN_EPCR	0x133	/* Embedded Processor Control Register */
 #define SPRN_DBCR2	0x136	/* Debug Control Register 2 */
 #define SPRN_IAC3	0x13A	/* Instruction Address Compare 3 */
 #define SPRN_IAC4	0x13B	/* Instruction Address Compare 4 */
 #define SPRN_DVC1	0x13E	/* Data Value Compare Register 1 */
 #define SPRN_DVC2	0x13F	/* Data Value Compare Register 2 */
+#define SPRN_MAS8	0x155	/* MMU Assist Register 8 */
+#define SPRN_TLB0PS	0x158	/* TLB 0 Page Size Register */
+#define SPRN_MAS5_MAS6	0x15c	/* MMU Assist Register 5 || 6 */
+#define SPRN_MAS8_MAS1	0x15d	/* MMU Assist Register 8 || 1 */
+#define SPRN_MAS7_MAS3	0x174	/* MMU Assist Register 7 || 3 */
+#define SPRN_MAS0_MAS1	0x175	/* MMU Assist Register 0 || 1 */
 #define SPRN_IVOR0	0x190	/* Interrupt Vector Offset Register 0 */
 #define SPRN_IVOR1	0x191	/* Interrupt Vector Offset Register 1 */
 #define SPRN_IVOR2	0x192	/* Interrupt Vector Offset Register 2 */
@@ -425,6 +440,27 @@
 #define SGR_NORMAL	0		/* Speculative fetching allowed. */
 #define SGR_GUARDED	1		/* Speculative fetching disallowed. */
 
+/* Bit definitions for EPCR */
+#define SPRN_EPCR_EXTGS		0x80000000	/* External Input interrupt
+						 * directed to Guest state */
+#define SPRN_EPCR_DTLBGS	0x40000000	/* Data TLB Error interrupt
+						 * directed to guest state */
+#define SPRN_EPCR_ITLBGS	0x20000000	/* Instr. TLB error interrupt
+						 * directed to guest state */
+#define SPRN_EPCR_DSIGS		0x10000000	/* Data Storage interrupt
+						 * directed to guest state */
+#define SPRN_EPCR_ISIGS		0x08000000	/* Instr. Storage interrupt
+						 * directed to guest state */
+#define SPRN_EPCR_DUVD		0x04000000	/* Disable Hypervisor Debug */
+#define SPRN_EPCR_ICM		0x02000000	/* Interrupt computation mode
+						 * (copied to MSR:CM on intr) */
+#define SPRN_EPCR_GICM		0x01000000	/* Guest Interrupt Comp. mode */
+#define SPRN_EPCR_DGTMI		0x00800000	/* Disable TLB Guest Management
+						 * instructions */
+#define SPRN_EPCR_DMIUH		0x00400000	/* Disable MAS Interrupt updates
+						 * for hypervisor */
+
+
 /*
  * The IBM-403 is an even more odd special case, as it is much
  * older than the IBM-405 series.  We put these down here incase someone
-- 
cgit v1.2.3


From 57e2a99f74b0d3720c97a6aadb57ae6aad3c61ea Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Tue, 28 Jul 2009 11:59:34 +1000
Subject: powerpc: Add memory management headers for new 64-bit BookE

This adds the PTE and pgtable format definitions, along with changes
to the kernel memory map and other definitions related to implementing
support for 64-bit Book3E. This also shields some asm-offset bits that
are currently only relevant on 32-bit

We also move the definition of the "linux" page size constants to
the common mmu.h file and add a few sizes that are relevant to
embedded processors.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/mmu-book3e.h    | 27 ++++++++++++
 arch/powerpc/include/asm/mmu-hash64.h    | 20 ---------
 arch/powerpc/include/asm/mmu.h           | 37 +++++++++++++++++
 arch/powerpc/include/asm/page.h          |  4 ++
 arch/powerpc/include/asm/page_64.h       | 10 +++++
 arch/powerpc/include/asm/pgtable-ppc64.h | 61 ++++++++++++++++++++--------
 arch/powerpc/include/asm/pte-book3e.h    | 70 ++++++++++++++++++++++++++++++++
 arch/powerpc/include/asm/pte-common.h    |  3 ++
 arch/powerpc/kernel/asm-offsets.c        |  5 ++-
 arch/powerpc/mm/hugetlbpage.c            |  8 +++-
 10 files changed, 205 insertions(+), 40 deletions(-)
 create mode 100644 arch/powerpc/include/asm/pte-book3e.h

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/mmu-book3e.h b/arch/powerpc/include/asm/mmu-book3e.h
index 42a39b4aace..6ddbe48d07f 100644
--- a/arch/powerpc/include/asm/mmu-book3e.h
+++ b/arch/powerpc/include/asm/mmu-book3e.h
@@ -170,6 +170,33 @@ typedef struct {
 	unsigned int	active;
 	unsigned long	vdso_base;
 } mm_context_t;
+
+/* Page size definitions, common between 32 and 64-bit
+ *
+ *    shift : is the "PAGE_SHIFT" value for that page size
+ *    penc  : is the pte encoding mask
+ *
+ */
+struct mmu_psize_def
+{
+	unsigned int	shift;	/* number of bits */
+	unsigned int	enc;	/* PTE encoding */
+};
+extern struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT];
+
+/* The page sizes use the same names as 64-bit hash but are
+ * constants
+ */
+#if defined(CONFIG_PPC_4K_PAGES)
+#define mmu_virtual_psize	MMU_PAGE_4K
+#elif defined(CONFIG_PPC_64K_PAGES)
+#define mmu_virtual_psize	MMU_PAGE_64K
+#else
+#error Unsupported page size
+#endif
+
+extern int mmu_linear_psize;
+
 #endif /* !__ASSEMBLY__ */
 
 #endif /* _ASM_POWERPC_MMU_BOOK3E_H_ */
diff --git a/arch/powerpc/include/asm/mmu-hash64.h b/arch/powerpc/include/asm/mmu-hash64.h
index 98c104a0996..b537903b9fc 100644
--- a/arch/powerpc/include/asm/mmu-hash64.h
+++ b/arch/powerpc/include/asm/mmu-hash64.h
@@ -138,26 +138,6 @@ struct mmu_psize_def
 
 #endif /* __ASSEMBLY__ */
 
-/*
- * The kernel use the constants below to index in the page sizes array.
- * The use of fixed constants for this purpose is better for performances
- * of the low level hash refill handlers.
- *
- * A non supported page size has a "shift" field set to 0
- *
- * Any new page size being implemented can get a new entry in here. Whether
- * the kernel will use it or not is a different matter though. The actual page
- * size used by hugetlbfs is not defined here and may be made variable
- */
-
-#define MMU_PAGE_4K		0	/* 4K */
-#define MMU_PAGE_64K		1	/* 64K */
-#define MMU_PAGE_64K_AP		2	/* 64K Admixed (in a 4K segment) */
-#define MMU_PAGE_1M		3	/* 1M */
-#define MMU_PAGE_16M		4	/* 16M */
-#define MMU_PAGE_16G		5	/* 16G */
-#define MMU_PAGE_COUNT		6
-
 /*
  * Segment sizes.
  * These are the values used by hardware in the B field of
diff --git a/arch/powerpc/include/asm/mmu.h b/arch/powerpc/include/asm/mmu.h
index fb57ded592f..2fcfefc6089 100644
--- a/arch/powerpc/include/asm/mmu.h
+++ b/arch/powerpc/include/asm/mmu.h
@@ -17,6 +17,7 @@
 #define MMU_FTR_TYPE_40x		ASM_CONST(0x00000004)
 #define MMU_FTR_TYPE_44x		ASM_CONST(0x00000008)
 #define MMU_FTR_TYPE_FSL_E		ASM_CONST(0x00000010)
+#define MMU_FTR_TYPE_3E			ASM_CONST(0x00000020)
 
 /*
  * This is individual features
@@ -73,6 +74,41 @@ extern void early_init_mmu_secondary(void);
 
 #endif /* !__ASSEMBLY__ */
 
+/* The kernel use the constants below to index in the page sizes array.
+ * The use of fixed constants for this purpose is better for performances
+ * of the low level hash refill handlers.
+ *
+ * A non supported page size has a "shift" field set to 0
+ *
+ * Any new page size being implemented can get a new entry in here. Whether
+ * the kernel will use it or not is a different matter though. The actual page
+ * size used by hugetlbfs is not defined here and may be made variable
+ *
+ * Note: This array ended up being a false good idea as it's growing to the
+ * point where I wonder if we should replace it with something different,
+ * to think about, feedback welcome. --BenH.
+ */
+
+/* There are #define as they have to be used in assembly
+ *
+ * WARNING: If you change this list, make sure to update the array of
+ * names currently in arch/powerpc/mm/hugetlbpage.c or bad things will
+ * happen
+ */
+#define MMU_PAGE_4K	0
+#define MMU_PAGE_16K	1
+#define MMU_PAGE_64K	2
+#define MMU_PAGE_64K_AP	3	/* "Admixed pages" (hash64 only) */
+#define MMU_PAGE_256K	4
+#define MMU_PAGE_1M	5
+#define MMU_PAGE_8M	6
+#define MMU_PAGE_16M	7
+#define MMU_PAGE_256M	8
+#define MMU_PAGE_1G	9
+#define MMU_PAGE_16G	10
+#define MMU_PAGE_64G	11
+#define MMU_PAGE_COUNT	12
+
 
 #if defined(CONFIG_PPC_STD_MMU_64)
 /* 64-bit classic hash table MMU */
@@ -94,5 +130,6 @@ extern void early_init_mmu_secondary(void);
 #  include <asm/mmu-8xx.h>
 #endif
 
+
 #endif /* __KERNEL__ */
 #endif /* _ASM_POWERPC_MMU_H_ */
diff --git a/arch/powerpc/include/asm/page.h b/arch/powerpc/include/asm/page.h
index 4940662ee87..ff24254990e 100644
--- a/arch/powerpc/include/asm/page.h
+++ b/arch/powerpc/include/asm/page.h
@@ -139,7 +139,11 @@ extern phys_addr_t kernstart_addr;
  * Don't compare things with KERNELBASE or PAGE_OFFSET to test for
  * "kernelness", use is_kernel_addr() - it should do what you want.
  */
+#ifdef CONFIG_PPC_BOOK3E_64
+#define is_kernel_addr(x)	((x) >= 0x8000000000000000ul)
+#else
 #define is_kernel_addr(x)	((x) >= PAGE_OFFSET)
+#endif
 
 #ifndef __ASSEMBLY__
 
diff --git a/arch/powerpc/include/asm/page_64.h b/arch/powerpc/include/asm/page_64.h
index 5817a3b747e..3f17b83f55a 100644
--- a/arch/powerpc/include/asm/page_64.h
+++ b/arch/powerpc/include/asm/page_64.h
@@ -135,12 +135,22 @@ extern void slice_set_range_psize(struct mm_struct *mm, unsigned long start,
 #endif /* __ASSEMBLY__ */
 #else
 #define slice_init()
+#ifdef CONFIG_PPC_STD_MMU_64
 #define get_slice_psize(mm, addr)	((mm)->context.user_psize)
 #define slice_set_user_psize(mm, psize)		\
 do {						\
 	(mm)->context.user_psize = (psize);	\
 	(mm)->context.sllp = SLB_VSID_USER | mmu_psize_defs[(psize)].sllp; \
 } while (0)
+#else /* CONFIG_PPC_STD_MMU_64 */
+#ifdef CONFIG_PPC_64K_PAGES
+#define get_slice_psize(mm, addr)	MMU_PAGE_64K
+#else /* CONFIG_PPC_64K_PAGES */
+#define get_slice_psize(mm, addr)	MMU_PAGE_4K
+#endif /* !CONFIG_PPC_64K_PAGES */
+#define slice_set_user_psize(mm, psize)	do { BUG(); } while(0)
+#endif /* !CONFIG_PPC_STD_MMU_64 */
+
 #define slice_set_range_psize(mm, start, len, psize)	\
 	slice_set_user_psize((mm), (psize))
 #define slice_mm_new_context(mm)	1
diff --git a/arch/powerpc/include/asm/pgtable-ppc64.h b/arch/powerpc/include/asm/pgtable-ppc64.h
index 8cd083c6150..7254c5a3187 100644
--- a/arch/powerpc/include/asm/pgtable-ppc64.h
+++ b/arch/powerpc/include/asm/pgtable-ppc64.h
@@ -5,11 +5,6 @@
  * the ppc64 hashed page table.
  */
 
-#ifndef __ASSEMBLY__
-#include <linux/stddef.h>
-#include <asm/tlbflush.h>
-#endif /* __ASSEMBLY__ */
-
 #ifdef CONFIG_PPC_64K_PAGES
 #include <asm/pgtable-ppc64-64k.h>
 #else
@@ -38,26 +33,46 @@
 #endif
 
 /*
- * Define the address range of the vmalloc VM area.
+ * Define the address range of the kernel non-linear virtual area
+ */
+
+#ifdef CONFIG_PPC_BOOK3E
+#define KERN_VIRT_START ASM_CONST(0x8000000000000000)
+#else
+#define KERN_VIRT_START ASM_CONST(0xD000000000000000)
+#endif
+#define KERN_VIRT_SIZE	PGTABLE_RANGE
+
+/*
+ * The vmalloc space starts at the beginning of that region, and
+ * occupies half of it on hash CPUs and a quarter of it on Book3E
  */
-#define VMALLOC_START ASM_CONST(0xD000000000000000)
-#define VMALLOC_SIZE  (PGTABLE_RANGE >> 1)
-#define VMALLOC_END   (VMALLOC_START + VMALLOC_SIZE)
+#define VMALLOC_START	KERN_VIRT_START
+#ifdef CONFIG_PPC_BOOK3E
+#define VMALLOC_SIZE	(KERN_VIRT_SIZE >> 2)
+#else
+#define VMALLOC_SIZE	(KERN_VIRT_SIZE >> 1)
+#endif
+#define VMALLOC_END	(VMALLOC_START + VMALLOC_SIZE)
 
 /*
- * Define the address ranges for MMIO and IO space :
+ * The second half of the kernel virtual space is used for IO mappings,
+ * it's itself carved into the PIO region (ISA and PHB IO space) and
+ * the ioremap space
  *
- *  ISA_IO_BASE = VMALLOC_END, 64K reserved area
+ *  ISA_IO_BASE = KERN_IO_START, 64K reserved area
  *  PHB_IO_BASE = ISA_IO_BASE + 64K to ISA_IO_BASE + 2G, PHB IO spaces
  * IOREMAP_BASE = ISA_IO_BASE + 2G to VMALLOC_START + PGTABLE_RANGE
  */
+#define KERN_IO_START	(KERN_VIRT_START + (KERN_VIRT_SIZE >> 1))
 #define FULL_IO_SIZE	0x80000000ul
-#define  ISA_IO_BASE	(VMALLOC_END)
-#define  ISA_IO_END	(VMALLOC_END + 0x10000ul)
+#define  ISA_IO_BASE	(KERN_IO_START)
+#define  ISA_IO_END	(KERN_IO_START + 0x10000ul)
 #define  PHB_IO_BASE	(ISA_IO_END)
-#define  PHB_IO_END	(VMALLOC_END + FULL_IO_SIZE)
+#define  PHB_IO_END	(KERN_IO_START + FULL_IO_SIZE)
 #define IOREMAP_BASE	(PHB_IO_END)
-#define IOREMAP_END	(VMALLOC_START + PGTABLE_RANGE)
+#define IOREMAP_END	(KERN_VIRT_START + KERN_VIRT_SIZE)
+
 
 /*
  * Region IDs
@@ -72,19 +87,28 @@
 #define USER_REGION_ID		(0UL)
 
 /*
- * Defines the address of the vmemap area, in its own region
+ * Defines the address of the vmemap area, in its own region on
+ * hash table CPUs and after the vmalloc space on Book3E
  */
+#ifdef CONFIG_PPC_BOOK3E
+#define VMEMMAP_BASE		VMALLOC_END
+#define VMEMMAP_END		KERN_IO_START
+#else
 #define VMEMMAP_BASE		(VMEMMAP_REGION_ID << REGION_SHIFT)
+#endif
 #define vmemmap			((struct page *)VMEMMAP_BASE)
 
 
 /*
  * Include the PTE bits definitions
  */
+#ifdef CONFIG_PPC_BOOK3S
 #include <asm/pte-hash64.h>
+#else
+#include <asm/pte-book3e.h>
+#endif
 #include <asm/pte-common.h>
 
-
 #ifdef CONFIG_PPC_MM_SLICES
 #define HAVE_ARCH_UNMAPPED_AREA
 #define HAVE_ARCH_UNMAPPED_AREA_TOPDOWN
@@ -92,6 +116,9 @@
 
 #ifndef __ASSEMBLY__
 
+#include <linux/stddef.h>
+#include <asm/tlbflush.h>
+
 /*
  * This is the default implementation of various PTE accessors, it's
  * used in all cases except Book3S with 64K pages where we have a
diff --git a/arch/powerpc/include/asm/pte-book3e.h b/arch/powerpc/include/asm/pte-book3e.h
new file mode 100644
index 00000000000..1d27c77d770
--- /dev/null
+++ b/arch/powerpc/include/asm/pte-book3e.h
@@ -0,0 +1,70 @@
+#ifndef _ASM_POWERPC_PTE_BOOK3E_H
+#define _ASM_POWERPC_PTE_BOOK3E_H
+#ifdef __KERNEL__
+
+/* PTE bit definitions for processors compliant to the Book3E
+ * architecture 2.06 or later. The position of the PTE bits
+ * matches the HW definition of the optional Embedded Page Table
+ * category.
+ */
+
+/* Architected bits */
+#define _PAGE_PRESENT	0x000001 /* software: pte contains a translation */
+#define _PAGE_FILE	0x000002 /* (!present only) software: pte holds file offset */
+#define _PAGE_SW1	0x000002
+#define _PAGE_BAP_SR	0x000004
+#define _PAGE_BAP_UR	0x000008
+#define _PAGE_BAP_SW	0x000010
+#define _PAGE_BAP_UW	0x000020
+#define _PAGE_BAP_SX	0x000040
+#define _PAGE_BAP_UX	0x000080
+#define _PAGE_PSIZE_MSK	0x000f00
+#define _PAGE_PSIZE_4K	0x000200
+#define _PAGE_PSIZE_64K	0x000600
+#define _PAGE_PSIZE_1M	0x000a00
+#define _PAGE_PSIZE_16M	0x000e00
+#define _PAGE_DIRTY	0x001000 /* C: page changed */
+#define _PAGE_SW0	0x002000
+#define _PAGE_U3	0x004000
+#define _PAGE_U2	0x008000
+#define _PAGE_U1	0x010000
+#define _PAGE_U0	0x020000
+#define _PAGE_ACCESSED	0x040000
+#define _PAGE_LENDIAN	0x080000
+#define _PAGE_GUARDED	0x100000
+#define _PAGE_COHERENT	0x200000 /* M: enforce memory coherence */
+#define _PAGE_NO_CACHE	0x400000 /* I: cache inhibit */
+#define _PAGE_WRITETHRU	0x800000 /* W: cache write-through */
+
+/* "Higher level" linux bit combinations */
+#define _PAGE_EXEC	_PAGE_BAP_SX /* Can be executed from potentially */
+#define _PAGE_HWEXEC	_PAGE_BAP_UX /* .. and was cache cleaned */
+#define _PAGE_RW	(_PAGE_BAP_SW | _PAGE_BAP_UW) /* User write permission */
+#define _PAGE_KERNEL_RW	(_PAGE_BAP_SW | _PAGE_BAP_SR | _PAGE_DIRTY)
+#define _PAGE_KERNEL_RO	(_PAGE_BAP_SR)
+#define _PAGE_USER	(_PAGE_BAP_UR | _PAGE_BAP_SR) /* Can be read */
+
+#define _PAGE_HASHPTE	0
+#define _PAGE_BUSY	0
+
+#define _PAGE_SPECIAL	_PAGE_SW0
+
+/* Flags to be preserved on PTE modifications */
+#define _PAGE_HPTEFLAGS	_PAGE_BUSY
+
+/* Base page size */
+#ifdef CONFIG_PPC_64K_PAGES
+#define _PAGE_PSIZE	_PAGE_PSIZE_64K
+#define PTE_RPN_SHIFT	(28)
+#else
+#define _PAGE_PSIZE	_PAGE_PSIZE_4K
+#define	PTE_RPN_SHIFT	(24)
+#endif
+
+/* On 32-bit, we never clear the top part of the PTE */
+#ifdef CONFIG_PPC32
+#define _PTE_NONE_MASK	0xffffffff00000000ULL
+#endif
+
+#endif /* __KERNEL__ */
+#endif /*  _ASM_POWERPC_PTE_FSL_BOOKE_H */
diff --git a/arch/powerpc/include/asm/pte-common.h b/arch/powerpc/include/asm/pte-common.h
index a7e210b6b48..8bb6464ba61 100644
--- a/arch/powerpc/include/asm/pte-common.h
+++ b/arch/powerpc/include/asm/pte-common.h
@@ -34,6 +34,9 @@
 #ifndef _PAGE_4K_PFN
 #define _PAGE_4K_PFN		0
 #endif
+#ifndef _PAGE_SAO
+#define _PAGE_SAO	0
+#endif
 #ifndef _PAGE_PSIZE
 #define _PAGE_PSIZE		0
 #endif
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index 561b6465231..0a9f30b5495 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -52,9 +52,11 @@
 #include <linux/kvm_host.h>
 #endif
 
+#ifdef CONFIG_PPC32
 #if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
 #include "head_booke.h"
 #endif
+#endif
 
 #if defined(CONFIG_FSL_BOOKE)
 #include "../mm/mmu_decl.h"
@@ -260,6 +262,7 @@ int main(void)
 	DEFINE(_SRR1, STACK_FRAME_OVERHEAD+sizeof(struct pt_regs)+8);
 #endif /* CONFIG_PPC64 */
 
+#if defined(CONFIG_PPC32)
 #if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
 	DEFINE(EXC_LVL_SIZE, STACK_EXC_LVL_FRAME_SIZE);
 	DEFINE(MAS0, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, mas0));
@@ -278,7 +281,7 @@ int main(void)
 	DEFINE(_DSRR1, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, dsrr1));
 	DEFINE(SAVED_KSP_LIMIT, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, saved_ksp_limit));
 #endif
-
+#endif
 	DEFINE(CLONE_VM, CLONE_VM);
 	DEFINE(CLONE_UNTRACED, CLONE_UNTRACED);
 
diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c
index c46ef2ffa3d..90df6ffe3a4 100644
--- a/arch/powerpc/mm/hugetlbpage.c
+++ b/arch/powerpc/mm/hugetlbpage.c
@@ -57,8 +57,10 @@ unsigned int mmu_huge_psizes[MMU_PAGE_COUNT] = { }; /* initialize all to 0 */
 #define HUGEPTE_CACHE_NAME(psize)	(huge_pgtable_cache_name[psize])
 
 static const char *huge_pgtable_cache_name[MMU_PAGE_COUNT] = {
-	"unused_4K", "hugepte_cache_64K", "unused_64K_AP",
-	"hugepte_cache_1M", "hugepte_cache_16M", "hugepte_cache_16G"
+	[MMU_PAGE_64K]	= "hugepte_cache_64K",
+	[MMU_PAGE_1M]	= "hugepte_cache_1M",
+	[MMU_PAGE_16M]	= "hugepte_cache_16M",
+	[MMU_PAGE_16G]	= "hugepte_cache_16G",
 };
 
 /* Flag to mark huge PD pointers.  This means pmd_bad() and pud_bad()
@@ -700,6 +702,8 @@ static void __init set_huge_psize(int psize)
 		if (mmu_huge_psizes[psize] ||
 		   mmu_psize_defs[psize].shift == PAGE_SHIFT)
 			return;
+		if (WARN_ON(HUGEPTE_CACHE_NAME(psize) == NULL))
+			return;
 		hugetlb_add_hstate(mmu_psize_defs[psize].shift - PAGE_SHIFT);
 
 		switch (mmu_psize_defs[psize].shift) {
-- 
cgit v1.2.3


From 13363ab9b9d040ebeace3a1a3a5ddcb13bf0d644 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Thu, 23 Jul 2009 23:15:39 +0000
Subject: powerpc: Add definitions used by exception handling on 64-bit Book3E

This adds various definitions and macros used by the exception and TLB
miss handling on 64-bit BookE

It also adds the definitions of the SPRGs used for various exception types

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/exception-64e.h | 201 +++++++++++++++++++++++++++++++
 arch/powerpc/include/asm/reg.h           |  19 +++
 2 files changed, 220 insertions(+)
 create mode 100644 arch/powerpc/include/asm/exception-64e.h

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/exception-64e.h b/arch/powerpc/include/asm/exception-64e.h
new file mode 100644
index 00000000000..94cb3d79d12
--- /dev/null
+++ b/arch/powerpc/include/asm/exception-64e.h
@@ -0,0 +1,201 @@
+/*
+ *  Definitions for use by exception code on Book3-E
+ *
+ *  Copyright (C) 2008 Ben. Herrenschmidt (benh@kernel.crashing.org), IBM Corp.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_POWERPC_EXCEPTION_64E_H
+#define _ASM_POWERPC_EXCEPTION_64E_H
+
+/*
+ * SPRGs usage an other considerations...
+ *
+ * Since TLB miss and other standard exceptions can be interrupted by
+ * critical exceptions which can themselves be interrupted by machine
+ * checks, and since the two later can themselves cause a TLB miss when
+ * hitting the linear mapping for the kernel stacks, we need to be a bit
+ * creative on how we use SPRGs.
+ *
+ * The base idea is that we have one SRPG reserved for critical and one
+ * for machine check interrupts. Those are used to save a GPR that can
+ * then be used to get the PACA, and store as much context as we need
+ * to save in there. That includes saving the SPRGs used by the TLB miss
+ * handler for linear mapping misses and the associated SRR0/1 due to
+ * the above re-entrancy issue.
+ *
+ * So here's the current usage pattern. It's done regardless of which
+ * SPRGs are user-readable though, thus we might have to change some of
+ * this later. In order to do that more easily, we use special constants
+ * for naming them
+ *
+ * WARNING: Some of these SPRGs are user readable. We need to do something
+ * about it as some point by making sure they can't be used to leak kernel
+ * critical data
+ */
+
+
+/* We are out of SPRGs so we save some things in the PACA. The normal
+ * exception frame is smaller than the CRIT or MC one though
+ */
+#define EX_R1		(0 * 8)
+#define EX_CR		(1 * 8)
+#define EX_R10		(2 * 8)
+#define EX_R11		(3 * 8)
+#define EX_R14		(4 * 8)
+#define EX_R15		(5 * 8)
+
+/* The TLB miss exception uses different slots */
+
+#define EX_TLB_R10	( 0 * 8)
+#define EX_TLB_R11	( 1 * 8)
+#define EX_TLB_R12	( 2 * 8)
+#define EX_TLB_R13	( 3 * 8)
+#define EX_TLB_R14	( 4 * 8)
+#define EX_TLB_R15	( 5 * 8)
+#define EX_TLB_R16	( 6 * 8)
+#define EX_TLB_CR	( 7 * 8)
+#define EX_TLB_DEAR	( 8 * 8) /* Level 0 and 2 only */
+#define EX_TLB_ESR	( 9 * 8) /* Level 0 and 2 only */
+#define EX_TLB_SRR0	(10 * 8)
+#define EX_TLB_SRR1	(11 * 8)
+#define EX_TLB_MMUCR0	(12 * 8) /* Level 0 */
+#define EX_TLB_MAS1	(12 * 8) /* Level 0 */
+#define EX_TLB_MAS2	(13 * 8) /* Level 0 */
+#ifdef CONFIG_BOOK3E_MMU_TLB_STATS
+#define EX_TLB_R8	(14 * 8)
+#define EX_TLB_R9	(15 * 8)
+#define EX_TLB_LR	(16 * 8)
+#define EX_TLB_SIZE	(17 * 8)
+#else
+#define EX_TLB_SIZE	(14 * 8)
+#endif
+
+#define	START_EXCEPTION(label)						\
+	.globl exc_##label##_book3e;					\
+exc_##label##_book3e:
+
+/* TLB miss exception prolog
+ *
+ * This prolog handles re-entrancy (up to 3 levels supported in the PACA
+ * though we currently don't test for overflow). It provides you with a
+ * re-entrancy safe working space of r10...r16 and CR with r12 being used
+ * as the exception area pointer in the PACA for that level of re-entrancy
+ * and r13 containing the PACA pointer.
+ *
+ * SRR0 and SRR1 are saved, but DEAR and ESR are not, since they don't apply
+ * as-is for instruction exceptions. It's up to the actual exception code
+ * to save them as well if required.
+ */
+#define TLB_MISS_PROLOG							    \
+	mtspr	SPRN_SPRG_TLB_SCRATCH,r12;				    \
+	mfspr	r12,SPRN_SPRG_TLB_EXFRAME;				    \
+	std	r10,EX_TLB_R10(r12);					    \
+	mfcr	r10;							    \
+	std	r11,EX_TLB_R11(r12);					    \
+	mfspr	r11,SPRN_SPRG_TLB_SCRATCH;				    \
+	std	r13,EX_TLB_R13(r12);					    \
+	mfspr	r13,SPRN_SPRG_PACA;					    \
+	std	r14,EX_TLB_R14(r12);					    \
+	addi	r14,r12,EX_TLB_SIZE;					    \
+	std	r15,EX_TLB_R15(r12);					    \
+	mfspr	r15,SPRN_SRR1;						    \
+	std	r16,EX_TLB_R16(r12);					    \
+	mfspr	r16,SPRN_SRR0;						    \
+	std	r10,EX_TLB_CR(r12);					    \
+	std	r11,EX_TLB_R12(r12);					    \
+	mtspr	SPRN_SPRG_TLB_EXFRAME,r14;				    \
+	std	r15,EX_TLB_SRR1(r12);					    \
+	std	r16,EX_TLB_SRR0(r12);					    \
+	TLB_MISS_PROLOG_STATS
+
+/* And these are the matching epilogs that restores things
+ *
+ * There are 3 epilogs:
+ *
+ * - SUCCESS       : Unwinds one level
+ * - ERROR         : restore from level 0 and reset
+ * - ERROR_SPECIAL : restore from current level and reset
+ *
+ * Normal errors use ERROR, that is, they restore the initial fault context
+ * and trigger a fault. However, there is a special case for linear mapping
+ * errors. Those should basically never happen, but if they do happen, we
+ * want the error to point out the context that did that linear mapping
+ * fault, not the initial level 0 (basically, we got a bogus PGF or something
+ * like that). For userland errors on the linear mapping, there is no
+ * difference since those are always level 0 anyway
+ */
+
+#define TLB_MISS_RESTORE(freg)						    \
+	ld	r14,EX_TLB_CR(r12);					    \
+	ld	r10,EX_TLB_R10(r12);					    \
+	ld	r15,EX_TLB_SRR0(r12);					    \
+	ld	r16,EX_TLB_SRR1(r12);					    \
+	mtspr	SPRN_SPRG_TLB_EXFRAME,freg;				    \
+	ld	r11,EX_TLB_R11(r12);					    \
+	mtcr	r14;							    \
+	ld	r13,EX_TLB_R13(r12);					    \
+	ld	r14,EX_TLB_R14(r12);					    \
+	mtspr	SPRN_SRR0,r15;						    \
+	ld	r15,EX_TLB_R15(r12);					    \
+	mtspr	SPRN_SRR1,r16;						    \
+	TLB_MISS_RESTORE_STATS						    \
+	ld	r16,EX_TLB_R16(r12);					    \
+	ld	r12,EX_TLB_R12(r12);					    \
+
+#define TLB_MISS_EPILOG_SUCCESS						    \
+	TLB_MISS_RESTORE(r12)
+
+#define TLB_MISS_EPILOG_ERROR						    \
+	addi	r12,r13,PACA_EXTLB;					    \
+	TLB_MISS_RESTORE(r12)
+
+#define TLB_MISS_EPILOG_ERROR_SPECIAL					    \
+	addi	r11,r13,PACA_EXTLB;					    \
+	TLB_MISS_RESTORE(r11)
+
+#ifdef CONFIG_BOOK3E_MMU_TLB_STATS
+#define TLB_MISS_PROLOG_STATS						    \
+	mflr	r10;							    \
+	std	r8,EX_TLB_R8(r12);					    \
+	std	r9,EX_TLB_R9(r12);					    \
+	std	r10,EX_TLB_LR(r12);
+#define TLB_MISS_RESTORE_STATS					            \
+	ld	r16,EX_TLB_LR(r12);					    \
+	ld	r9,EX_TLB_R9(r12);					    \
+	ld	r8,EX_TLB_R8(r12);					    \
+	mtlr	r16;
+#define TLB_MISS_STATS_D(name)						    \
+	addi	r9,r13,MMSTAT_DSTATS+name;				    \
+	bl	.tlb_stat_inc;
+#define TLB_MISS_STATS_I(name)						    \
+	addi	r9,r13,MMSTAT_ISTATS+name;				    \
+	bl	.tlb_stat_inc;
+#define TLB_MISS_STATS_X(name)						    \
+	ld	r8,PACA_EXTLB+EX_TLB_ESR(r13);				    \
+	cmpdi	cr2,r8,-1;						    \
+	beq	cr2,61f;						    \
+	addi	r9,r13,MMSTAT_DSTATS+name;				    \
+	b	62f;							    \
+61:	addi	r9,r13,MMSTAT_ISTATS+name;				    \
+62:	bl	.tlb_stat_inc;
+#define TLB_MISS_STATS_SAVE_INFO					    \
+	std	r14,EX_TLB_ESR(r12);	/* save ESR */			    \
+
+
+#else
+#define TLB_MISS_PROLOG_STATS
+#define TLB_MISS_RESTORE_STATS
+#define TLB_MISS_STATS_D(name)
+#define TLB_MISS_STATS_I(name)
+#define TLB_MISS_STATS_X(name)
+#define TLB_MISS_STATS_Y(name)
+#define TLB_MISS_STATS_SAVE_INFO
+#endif
+
+
+#endif /* _ASM_POWERPC_EXCEPTION_64E_H */
+
diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index c8715331e1b..6315edc205d 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -652,6 +652,16 @@
  *	- SPRG2 scratch for exception vectors
  *	- SPRG3 unused (user visible)
  *
+ * 64-bit embedded
+ *	- SPRG0 generic exception scratch
+ *	- SPRG2 TLB exception stack
+ *	- SPRG3 unused (user visible)
+ *	- SPRG4 unused (user visible)
+ *	- SPRG6 TLB miss scratch (user visible, sorry !)
+ *	- SPRG7 critical exception scratch
+ *	- SPRG8 machine check exception scratch
+ *	- SPRG9 debug exception scratch
+ *
  * All 32-bit:
  *	- SPRG3 current thread_info pointer
  *        (virtual on BookE, physical on others)
@@ -705,6 +715,15 @@
 #define SPRN_SPRG_SCRATCH0	SPRN_SPRG2
 #endif
 
+#ifdef CONFIG_PPC_BOOK3E_64
+#define SPRN_SPRG_MC_SCRATCH	SPRN_SPRG8
+#define SPRN_SPRG_CRIT_SCRATCH	SPRN_SPRG7
+#define SPRN_SPRG_DBG_SCRATCH	SPRN_SPRG9
+#define SPRN_SPRG_TLB_EXFRAME	SPRN_SPRG2
+#define SPRN_SPRG_TLB_SCRATCH	SPRN_SPRG6
+#define SPRN_SPRG_GEN_SCRATCH	SPRN_SPRG0
+#endif
+
 #ifdef CONFIG_PPC_BOOK3S_32
 #define SPRN_SPRG_SCRATCH0	SPRN_SPRG0
 #define SPRN_SPRG_SCRATCH1	SPRN_SPRG1
-- 
cgit v1.2.3


From dce6670aaa7efece0558010b48d5ef9d421154be Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Thu, 23 Jul 2009 23:15:42 +0000
Subject: powerpc: Add PACA fields specific to 64-bit Book3E processors

This adds various fields in the PACA that are for use specifically
by Book3E processors, such as exception save areas, current pgd
pointer, special exceptions kernel stacks etc...

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/paca.h   | 23 ++++++++++++++++++++---
 arch/powerpc/kernel/asm-offsets.c | 14 ++++++++++++++
 arch/powerpc/kernel/paca.c        |  3 +++
 3 files changed, 37 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/paca.h b/arch/powerpc/include/asm/paca.h
index c8a3cbfe02f..b634456ea89 100644
--- a/arch/powerpc/include/asm/paca.h
+++ b/arch/powerpc/include/asm/paca.h
@@ -14,9 +14,11 @@
 #define _ASM_POWERPC_PACA_H
 #ifdef __KERNEL__
 
-#include	<asm/types.h>
-#include	<asm/lppaca.h>
-#include	<asm/mmu.h>
+#include <asm/types.h>
+#include <asm/lppaca.h>
+#include <asm/mmu.h>
+#include <asm/page.h>
+#include <asm/exception-64e.h>
 
 register struct paca_struct *local_paca asm("r13");
 
@@ -91,6 +93,21 @@ struct paca_struct {
 	u16 slb_cache[SLB_CACHE_ENTRIES];
 #endif /* CONFIG_PPC_STD_MMU_64 */
 
+#ifdef CONFIG_PPC_BOOK3E
+	pgd_t *pgd;			/* Current PGD */
+	pgd_t *kernel_pgd;		/* Kernel PGD */
+	u64 exgen[8] __attribute__((aligned(0x80)));
+	u64 extlb[EX_TLB_SIZE*3] __attribute__((aligned(0x80)));
+	u64 exmc[8];		/* used for machine checks */
+	u64 excrit[8];		/* used for crit interrupts */
+	u64 exdbg[8];		/* used for debug interrupts */
+
+	/* Kernel stack pointers for use by special exceptions */
+	void *mc_kstack;
+	void *crit_kstack;
+	void *dbg_kstack;
+#endif /* CONFIG_PPC_BOOK3E */
+
 	mm_context_t context;
 
 	/*
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index 0a9f30b5495..b9e010d0fc9 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -140,6 +140,20 @@ int main(void)
 					    context.high_slices_psize));
 	DEFINE(MMUPSIZEDEFSIZE, sizeof(struct mmu_psize_def));
 #endif /* CONFIG_PPC_MM_SLICES */
+
+#ifdef CONFIG_PPC_BOOK3E
+	DEFINE(PACAPGD, offsetof(struct paca_struct, pgd));
+	DEFINE(PACA_KERNELPGD, offsetof(struct paca_struct, kernel_pgd));
+	DEFINE(PACA_EXGEN, offsetof(struct paca_struct, exgen));
+	DEFINE(PACA_EXTLB, offsetof(struct paca_struct, extlb));
+	DEFINE(PACA_EXMC, offsetof(struct paca_struct, exmc));
+	DEFINE(PACA_EXCRIT, offsetof(struct paca_struct, excrit));
+	DEFINE(PACA_EXDBG, offsetof(struct paca_struct, exdbg));
+	DEFINE(PACA_MC_STACK, offsetof(struct paca_struct, mc_kstack));
+	DEFINE(PACA_CRIT_STACK, offsetof(struct paca_struct, crit_kstack));
+	DEFINE(PACA_DBG_STACK, offsetof(struct paca_struct, dbg_kstack));
+#endif /* CONFIG_PPC_BOOK3E */
+
 #ifdef CONFIG_PPC_STD_MMU_64
 	DEFINE(PACASTABREAL, offsetof(struct paca_struct, stab_real));
 	DEFINE(PACASTABVIRT, offsetof(struct paca_struct, stab_addr));
diff --git a/arch/powerpc/kernel/paca.c b/arch/powerpc/kernel/paca.c
index e9962c7f8a0..d16b1ea55d4 100644
--- a/arch/powerpc/kernel/paca.c
+++ b/arch/powerpc/kernel/paca.c
@@ -13,6 +13,7 @@
 #include <asm/lppaca.h>
 #include <asm/paca.h>
 #include <asm/sections.h>
+#include <asm/pgtable.h>
 
 /* This symbol is provided by the linker - let it fill in the paca
  * field correctly */
@@ -87,6 +88,8 @@ void __init initialise_pacas(void)
 
 #ifdef CONFIG_PPC_BOOK3S
 		new_paca->lppaca_ptr = &lppaca[cpu];
+#else
+		new_paca->kernel_pgd = swapper_pg_dir;
 #endif
 		new_paca->lock_token = 0x8000;
 		new_paca->paca_index = cpu;
-- 
cgit v1.2.3


From a8f7758c1c52a13e031266483efd5525157e43e9 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Thu, 23 Jul 2009 23:15:45 +0000
Subject: powerpc/mm: Move around mmu_gathers definition on 64-bit

The definition for the global structure mmu_gathers, used by generic code,
is currently defined in multiple places not including anything used by
64-bit Book3E. This changes it by moving to one place common to all
processors.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/mm/init_32.c    | 2 --
 arch/powerpc/mm/pgtable.c    | 2 ++
 arch/powerpc/mm/tlb_hash64.c | 5 -----
 3 files changed, 2 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c
index 3de6a0d9382..3ef5084b90c 100644
--- a/arch/powerpc/mm/init_32.c
+++ b/arch/powerpc/mm/init_32.c
@@ -54,8 +54,6 @@
 #endif
 #define MAX_LOW_MEM	CONFIG_LOWMEM_SIZE
 
-DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
-
 phys_addr_t total_memory;
 phys_addr_t total_lowmem;
 
diff --git a/arch/powerpc/mm/pgtable.c b/arch/powerpc/mm/pgtable.c
index a65979a5f75..cafb2a26954 100644
--- a/arch/powerpc/mm/pgtable.c
+++ b/arch/powerpc/mm/pgtable.c
@@ -30,6 +30,8 @@
 #include <asm/tlbflush.h>
 #include <asm/tlb.h>
 
+DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
+
 #ifdef CONFIG_SMP
 
 /*
diff --git a/arch/powerpc/mm/tlb_hash64.c b/arch/powerpc/mm/tlb_hash64.c
index 8e35a606693..2b2f35f6985 100644
--- a/arch/powerpc/mm/tlb_hash64.c
+++ b/arch/powerpc/mm/tlb_hash64.c
@@ -33,11 +33,6 @@
 
 DEFINE_PER_CPU(struct ppc64_tlb_batch, ppc64_tlb_batch);
 
-/* This is declared as we are using the more or less generic
- * arch/powerpc/include/asm/tlb.h file -- tgall
- */
-DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
-
 /*
  * A linux PTE was changed and the corresponding hash table entry
  * neesd to be flushed. This function will either perform the flush
-- 
cgit v1.2.3


From 25d21ad6e799cccd097b9df2a2fefe19a7e1dfcf Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Thu, 23 Jul 2009 23:15:47 +0000
Subject: powerpc: Add TLB management code for 64-bit Book3E

This adds the TLB miss handler assembly, the low level TLB flush routines
along with the necessary hook for dealing with our virtual page tables
or indirect TLB entries that need to be flushes when PTE pages are freed.

There is currently no support for hugetlbfs

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/mmu-40x.h     |   3 +
 arch/powerpc/include/asm/mmu-44x.h     |   6 +
 arch/powerpc/include/asm/mmu-8xx.h     |   3 +
 arch/powerpc/include/asm/mmu-hash32.h  |   6 +
 arch/powerpc/include/asm/mmu_context.h |   8 +
 arch/powerpc/kernel/setup_64.c         |   4 +
 arch/powerpc/mm/mmu_decl.h             |  14 +-
 arch/powerpc/mm/tlb_low_64e.S          | 734 +++++++++++++++++++++++++++++++++
 arch/powerpc/mm/tlb_nohash.c           | 203 ++++++++-
 arch/powerpc/mm/tlb_nohash_low.S       |  79 ++++
 10 files changed, 1055 insertions(+), 5 deletions(-)
 create mode 100644 arch/powerpc/mm/tlb_low_64e.S

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/mmu-40x.h b/arch/powerpc/include/asm/mmu-40x.h
index 776f415a36a..34916865eae 100644
--- a/arch/powerpc/include/asm/mmu-40x.h
+++ b/arch/powerpc/include/asm/mmu-40x.h
@@ -61,4 +61,7 @@ typedef struct {
 
 #endif /* !__ASSEMBLY__ */
 
+#define mmu_virtual_psize	MMU_PAGE_4K
+#define mmu_linear_psize	MMU_PAGE_256M
+
 #endif /* _ASM_POWERPC_MMU_40X_H_ */
diff --git a/arch/powerpc/include/asm/mmu-44x.h b/arch/powerpc/include/asm/mmu-44x.h
index 3c86576bfef..0372669383a 100644
--- a/arch/powerpc/include/asm/mmu-44x.h
+++ b/arch/powerpc/include/asm/mmu-44x.h
@@ -79,16 +79,22 @@ typedef struct {
 
 #if (PAGE_SHIFT == 12)
 #define PPC44x_TLBE_SIZE	PPC44x_TLB_4K
+#define mmu_virtual_psize	MMU_PAGE_4K
 #elif (PAGE_SHIFT == 14)
 #define PPC44x_TLBE_SIZE	PPC44x_TLB_16K
+#define mmu_virtual_psize	MMU_PAGE_16K
 #elif (PAGE_SHIFT == 16)
 #define PPC44x_TLBE_SIZE	PPC44x_TLB_64K
+#define mmu_virtual_psize	MMU_PAGE_64K
 #elif (PAGE_SHIFT == 18)
 #define PPC44x_TLBE_SIZE	PPC44x_TLB_256K
+#define mmu_virtual_psize	MMU_PAGE_256K
 #else
 #error "Unsupported PAGE_SIZE"
 #endif
 
+#define mmu_linear_psize	MMU_PAGE_256M
+
 #define PPC44x_PGD_OFF_SHIFT	(32 - PGDIR_SHIFT + PGD_T_LOG2)
 #define PPC44x_PGD_OFF_MASK_BIT	(PGDIR_SHIFT - PGD_T_LOG2)
 #define PPC44x_PTE_ADD_SHIFT	(32 - PGDIR_SHIFT + PTE_SHIFT + PTE_T_LOG2)
diff --git a/arch/powerpc/include/asm/mmu-8xx.h b/arch/powerpc/include/asm/mmu-8xx.h
index 07865a35784..3d11d3ce79e 100644
--- a/arch/powerpc/include/asm/mmu-8xx.h
+++ b/arch/powerpc/include/asm/mmu-8xx.h
@@ -143,4 +143,7 @@ typedef struct {
 } mm_context_t;
 #endif /* !__ASSEMBLY__ */
 
+#define mmu_virtual_psize	MMU_PAGE_4K
+#define mmu_linear_psize	MMU_PAGE_8M
+
 #endif /* _ASM_POWERPC_MMU_8XX_H_ */
diff --git a/arch/powerpc/include/asm/mmu-hash32.h b/arch/powerpc/include/asm/mmu-hash32.h
index 16b1a1e77e6..382fc689f20 100644
--- a/arch/powerpc/include/asm/mmu-hash32.h
+++ b/arch/powerpc/include/asm/mmu-hash32.h
@@ -80,4 +80,10 @@ typedef struct {
 
 #endif /* !__ASSEMBLY__ */
 
+/* We happily ignore the smaller BATs on 601, we don't actually use
+ * those definitions on hash32 at the moment anyway
+ */
+#define mmu_virtual_psize	MMU_PAGE_4K
+#define mmu_linear_psize	MMU_PAGE_256M
+
 #endif /* _ASM_POWERPC_MMU_HASH32_H_ */
diff --git a/arch/powerpc/include/asm/mmu_context.h b/arch/powerpc/include/asm/mmu_context.h
index 8dffed31701..b34e94d9443 100644
--- a/arch/powerpc/include/asm/mmu_context.h
+++ b/arch/powerpc/include/asm/mmu_context.h
@@ -43,6 +43,10 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
 	tsk->thread.pgdir = next->pgd;
 #endif /* CONFIG_PPC32 */
 
+	/* 64-bit Book3E keeps track of current PGD in the PACA */
+#ifdef CONFIG_PPC_BOOK3E_64
+	get_paca()->pgd = next->pgd;
+#endif
 	/* Nothing else to do if we aren't actually switching */
 	if (prev == next)
 		return;
@@ -89,6 +93,10 @@ static inline void activate_mm(struct mm_struct *prev, struct mm_struct *next)
 static inline void enter_lazy_tlb(struct mm_struct *mm,
 				  struct task_struct *tsk)
 {
+	/* 64-bit Book3E keeps track of current PGD in the PACA */
+#ifdef CONFIG_PPC_BOOK3E_64
+	get_paca()->pgd = NULL;
+#endif
 }
 
 #endif /* __KERNEL__ */
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index a6b6c4c9ae4..65aced7b833 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -62,6 +62,7 @@
 #include <asm/udbg.h>
 #include <asm/kexec.h>
 #include <asm/swiotlb.h>
+#include <asm/mmu_context.h>
 
 #include "setup.h"
 
@@ -147,6 +148,9 @@ void __init setup_paca(int cpu)
 {
 	local_paca = &paca[cpu];
 	mtspr(SPRN_SPRG_PACA, local_paca);
+#ifdef CONFIG_PPC_BOOK3E
+	mtspr(SPRN_SPRG_TLB_EXFRAME, local_paca->extlb);
+#endif
 }
 
 /*
diff --git a/arch/powerpc/mm/mmu_decl.h b/arch/powerpc/mm/mmu_decl.h
index 3871dceee2d..5961c6b739d 100644
--- a/arch/powerpc/mm/mmu_decl.h
+++ b/arch/powerpc/mm/mmu_decl.h
@@ -41,7 +41,11 @@ static inline void _tlbil_pid(unsigned int pid)
 #else /* CONFIG_40x || CONFIG_8xx */
 extern void _tlbil_all(void);
 extern void _tlbil_pid(unsigned int pid);
+#ifdef CONFIG_PPC_BOOK3E
+extern void _tlbil_pid_noind(unsigned int pid);
+#else
 #define _tlbil_pid_noind(pid)	_tlbil_pid(pid)
+#endif
 #endif /* !(CONFIG_40x || CONFIG_8xx) */
 
 /*
@@ -53,7 +57,10 @@ static inline void _tlbil_va(unsigned long address, unsigned int pid,
 {
 	asm volatile ("tlbie %0; sync" : : "r" (address) : "memory");
 }
-#else /* CONFIG_8xx */
+#elif defined(CONFIG_PPC_BOOK3E)
+extern void _tlbil_va(unsigned long address, unsigned int pid,
+		      unsigned int tsize, unsigned int ind);
+#else
 extern void __tlbil_va(unsigned long address, unsigned int pid);
 static inline void _tlbil_va(unsigned long address, unsigned int pid,
 			     unsigned int tsize, unsigned int ind)
@@ -67,11 +74,16 @@ static inline void _tlbil_va(unsigned long address, unsigned int pid,
  * implementation. When that becomes the case, this will be
  * an extern.
  */
+#ifdef CONFIG_PPC_BOOK3E
+extern void _tlbivax_bcast(unsigned long address, unsigned int pid,
+			   unsigned int tsize, unsigned int ind);
+#else
 static inline void _tlbivax_bcast(unsigned long address, unsigned int pid,
 				   unsigned int tsize, unsigned int ind)
 {
 	BUG();
 }
+#endif
 
 #else /* CONFIG_PPC_MMU_NOHASH */
 
diff --git a/arch/powerpc/mm/tlb_low_64e.S b/arch/powerpc/mm/tlb_low_64e.S
new file mode 100644
index 00000000000..10d524ded7b
--- /dev/null
+++ b/arch/powerpc/mm/tlb_low_64e.S
@@ -0,0 +1,734 @@
+/*
+ *  Low leve TLB miss handlers for Book3E
+ *
+ *  Copyright (C) 2008-2009
+ *      Ben. Herrenschmidt (benh@kernel.crashing.org), IBM Corp.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ */
+
+#include <asm/processor.h>
+#include <asm/reg.h>
+#include <asm/page.h>
+#include <asm/mmu.h>
+#include <asm/ppc_asm.h>
+#include <asm/asm-offsets.h>
+#include <asm/cputable.h>
+#include <asm/pgtable.h>
+#include <asm/reg.h>
+#include <asm/exception-64e.h>
+#include <asm/ppc-opcode.h>
+
+#ifdef CONFIG_PPC_64K_PAGES
+#define VPTE_PMD_SHIFT	(PTE_INDEX_SIZE+1)
+#else
+#define VPTE_PMD_SHIFT	(PTE_INDEX_SIZE)
+#endif
+#define VPTE_PUD_SHIFT	(VPTE_PMD_SHIFT + PMD_INDEX_SIZE)
+#define VPTE_PGD_SHIFT	(VPTE_PUD_SHIFT + PUD_INDEX_SIZE)
+#define VPTE_INDEX_SIZE (VPTE_PGD_SHIFT + PGD_INDEX_SIZE)
+
+
+/**********************************************************************
+ *                                                                    *
+ * TLB miss handling for Book3E with TLB reservation and HES support  *
+ *                                                                    *
+ **********************************************************************/
+
+
+/* Data TLB miss */
+	START_EXCEPTION(data_tlb_miss)
+	TLB_MISS_PROLOG
+
+	/* Now we handle the fault proper. We only save DEAR in normal
+	 * fault case since that's the only interesting values here.
+	 * We could probably also optimize by not saving SRR0/1 in the
+	 * linear mapping case but I'll leave that for later
+	 */
+	mfspr	r14,SPRN_ESR
+	mfspr	r16,SPRN_DEAR		/* get faulting address */
+	srdi	r15,r16,60		/* get region */
+	cmpldi	cr0,r15,0xc		/* linear mapping ? */
+	TLB_MISS_STATS_SAVE_INFO
+	beq	tlb_load_linear		/* yes -> go to linear map load */
+
+	/* The page tables are mapped virtually linear. At this point, though,
+	 * we don't know whether we are trying to fault in a first level
+	 * virtual address or a virtual page table address. We can get that
+	 * from bit 0x1 of the region ID which we have set for a page table
+	 */
+	andi.	r10,r15,0x1
+	bne-	virt_page_table_tlb_miss
+
+	std	r14,EX_TLB_ESR(r12);	/* save ESR */
+	std	r16,EX_TLB_DEAR(r12);	/* save DEAR */
+
+	 /* We need _PAGE_PRESENT and  _PAGE_ACCESSED set */
+	li	r11,_PAGE_PRESENT
+	oris	r11,r11,_PAGE_ACCESSED@h
+
+	/* We do the user/kernel test for the PID here along with the RW test
+	 */
+	cmpldi	cr0,r15,0		/* Check for user region */
+
+	/* We pre-test some combination of permissions to avoid double
+	 * faults:
+	 *
+	 * We move the ESR:ST bit into the position of _PAGE_BAP_SW in the PTE
+	 * ESR_ST   is 0x00800000
+	 * _PAGE_BAP_SW is 0x00000010
+	 * So the shift is >> 19. This tests for supervisor writeability.
+	 * If the page happens to be supervisor writeable and not user
+	 * writeable, we will take a new fault later, but that should be
+	 * a rare enough case.
+	 *
+	 * We also move ESR_ST in _PAGE_DIRTY position
+	 * _PAGE_DIRTY is 0x00001000 so the shift is >> 11
+	 *
+	 * MAS1 is preset for all we need except for TID that needs to
+	 * be cleared for kernel translations
+	 */
+	rlwimi	r11,r14,32-19,27,27
+	rlwimi	r11,r14,32-16,19,19
+	beq	normal_tlb_miss
+	/* XXX replace the RMW cycles with immediate loads + writes */
+1:	mfspr	r10,SPRN_MAS1
+	cmpldi	cr0,r15,8		/* Check for vmalloc region */
+	rlwinm	r10,r10,0,16,1		/* Clear TID */
+	mtspr	SPRN_MAS1,r10
+	beq+	normal_tlb_miss
+
+	/* We got a crappy address, just fault with whatever DEAR and ESR
+	 * are here
+	 */
+	TLB_MISS_STATS_D(MMSTAT_TLB_MISS_NORM_FAULT)
+	TLB_MISS_EPILOG_ERROR
+	b	exc_data_storage_book3e
+
+/* Instruction TLB miss */
+	START_EXCEPTION(instruction_tlb_miss)
+	TLB_MISS_PROLOG
+
+	/* If we take a recursive fault, the second level handler may need
+	 * to know whether we are handling a data or instruction fault in
+	 * order to get to the right store fault handler. We provide that
+	 * info by writing a crazy value in ESR in our exception frame
+	 */
+	li	r14,-1	/* store to exception frame is done later */
+
+	/* Now we handle the fault proper. We only save DEAR in the non
+	 * linear mapping case since we know the linear mapping case will
+	 * not re-enter. We could indeed optimize and also not save SRR0/1
+	 * in the linear mapping case but I'll leave that for later
+	 *
+	 * Faulting address is SRR0 which is already in r16
+	 */
+	srdi	r15,r16,60		/* get region */
+	cmpldi	cr0,r15,0xc		/* linear mapping ? */
+	TLB_MISS_STATS_SAVE_INFO
+	beq	tlb_load_linear		/* yes -> go to linear map load */
+
+	/* We do the user/kernel test for the PID here along with the RW test
+	 */
+	li	r11,_PAGE_PRESENT|_PAGE_HWEXEC	/* Base perm */
+	oris	r11,r11,_PAGE_ACCESSED@h
+
+	cmpldi	cr0,r15,0			/* Check for user region */
+	std	r14,EX_TLB_ESR(r12)		/* write crazy -1 to frame */
+	beq	normal_tlb_miss
+	/* XXX replace the RMW cycles with immediate loads + writes */
+1:	mfspr	r10,SPRN_MAS1
+	cmpldi	cr0,r15,8			/* Check for vmalloc region */
+	rlwinm	r10,r10,0,16,1			/* Clear TID */
+	mtspr	SPRN_MAS1,r10
+	beq+	normal_tlb_miss
+
+	/* We got a crappy address, just fault */
+	TLB_MISS_STATS_I(MMSTAT_TLB_MISS_NORM_FAULT)
+	TLB_MISS_EPILOG_ERROR
+	b	exc_instruction_storage_book3e
+
+/*
+ * This is the guts of the first-level TLB miss handler for direct
+ * misses. We are entered with:
+ *
+ * r16 = faulting address
+ * r15 = region ID
+ * r14 = crap (free to use)
+ * r13 = PACA
+ * r12 = TLB exception frame in PACA
+ * r11 = PTE permission mask
+ * r10 = crap (free to use)
+ */
+normal_tlb_miss:
+	/* So we first construct the page table address. We do that by
+	 * shifting the bottom of the address (not the region ID) by
+	 * PAGE_SHIFT-3, clearing the bottom 3 bits (get a PTE ptr) and
+	 * or'ing the fourth high bit.
+	 *
+	 * NOTE: For 64K pages, we do things slightly differently in
+	 * order to handle the weird page table format used by linux
+	 */
+	ori	r10,r15,0x1
+#ifdef CONFIG_PPC_64K_PAGES
+	/* For the top bits, 16 bytes per PTE */
+	rldicl	r14,r16,64-(PAGE_SHIFT-4),PAGE_SHIFT-4+4
+	/* Now create the bottom bits as 0 in position 0x8000 and
+	 * the rest calculated for 8 bytes per PTE
+	 */
+	rldicl	r15,r16,64-(PAGE_SHIFT-3),64-15
+	/* Insert the bottom bits in */
+	rlwimi	r14,r15,0,16,31
+#else
+	rldicl	r14,r16,64-(PAGE_SHIFT-3),PAGE_SHIFT-3+4
+#endif
+	sldi	r15,r10,60
+	clrrdi	r14,r14,3
+	or	r10,r15,r14
+
+	/* Set the TLB reservation and seach for existing entry. Then load
+	 * the entry.
+	 */
+	PPC_TLBSRX_DOT(0,r16)
+	ld	r14,0(r10)
+	beq	normal_tlb_miss_done
+
+finish_normal_tlb_miss:
+	/* Check if required permissions are met */
+	andc.	r15,r11,r14
+	bne-	normal_tlb_miss_access_fault
+
+	/* Now we build the MAS:
+	 *
+	 * MAS 0   :	Fully setup with defaults in MAS4 and TLBnCFG
+	 * MAS 1   :	Almost fully setup
+	 *               - PID already updated by caller if necessary
+	 *               - TSIZE need change if !base page size, not
+	 *                 yet implemented for now
+	 * MAS 2   :	Defaults not useful, need to be redone
+	 * MAS 3+7 :	Needs to be done
+	 *
+	 * TODO: mix up code below for better scheduling
+	 */
+	clrrdi	r11,r16,12		/* Clear low crap in EA */
+	rlwimi	r11,r14,32-19,27,31	/* Insert WIMGE */
+	mtspr	SPRN_MAS2,r11
+
+	/* Check page size, if not standard, update MAS1 */
+	rldicl	r11,r14,64-8,64-8
+#ifdef CONFIG_PPC_64K_PAGES
+	cmpldi	cr0,r11,BOOK3E_PAGESZ_64K
+#else
+	cmpldi	cr0,r11,BOOK3E_PAGESZ_4K
+#endif
+	beq-	1f
+	mfspr	r11,SPRN_MAS1
+	rlwimi	r11,r14,31,21,24
+	rlwinm	r11,r11,0,21,19
+	mtspr	SPRN_MAS1,r11
+1:
+	/* Move RPN in position */
+	rldicr	r11,r14,64-(PTE_RPN_SHIFT-PAGE_SHIFT),63-PAGE_SHIFT
+	clrldi	r15,r11,12		/* Clear crap at the top */
+	rlwimi	r15,r14,32-8,22,25	/* Move in U bits */
+	rlwimi	r15,r14,32-2,26,31	/* Move in BAP bits */
+
+	/* Mask out SW and UW if !DIRTY (XXX optimize this !) */
+	andi.	r11,r14,_PAGE_DIRTY
+	bne	1f
+	li	r11,MAS3_SW|MAS3_UW
+	andc	r15,r15,r11
+1:	mtspr	SPRN_MAS7_MAS3,r15
+
+	tlbwe
+
+normal_tlb_miss_done:
+	/* We don't bother with restoring DEAR or ESR since we know we are
+	 * level 0 and just going back to userland. They are only needed
+	 * if you are going to take an access fault
+	 */
+	TLB_MISS_STATS_X(MMSTAT_TLB_MISS_NORM_OK)
+	TLB_MISS_EPILOG_SUCCESS
+	rfi
+
+normal_tlb_miss_access_fault:
+	/* We need to check if it was an instruction miss */
+	andi.	r10,r11,_PAGE_HWEXEC
+	bne	1f
+	ld	r14,EX_TLB_DEAR(r12)
+	ld	r15,EX_TLB_ESR(r12)
+	mtspr	SPRN_DEAR,r14
+	mtspr	SPRN_ESR,r15
+	TLB_MISS_STATS_D(MMSTAT_TLB_MISS_NORM_FAULT)
+	TLB_MISS_EPILOG_ERROR
+	b	exc_data_storage_book3e
+1:	TLB_MISS_STATS_I(MMSTAT_TLB_MISS_NORM_FAULT)
+	TLB_MISS_EPILOG_ERROR
+	b	exc_instruction_storage_book3e
+
+
+/*
+ * This is the guts of the second-level TLB miss handler for direct
+ * misses. We are entered with:
+ *
+ * r16 = virtual page table faulting address
+ * r15 = region (top 4 bits of address)
+ * r14 = crap (free to use)
+ * r13 = PACA
+ * r12 = TLB exception frame in PACA
+ * r11 = crap (free to use)
+ * r10 = crap (free to use)
+ *
+ * Note that this should only ever be called as a second level handler
+ * with the current scheme when using SW load.
+ * That means we can always get the original fault DEAR at
+ * EX_TLB_DEAR-EX_TLB_SIZE(r12)
+ *
+ * It can be re-entered by the linear mapping miss handler. However, to
+ * avoid too much complication, it will restart the whole fault at level
+ * 0 so we don't care too much about clobbers
+ *
+ * XXX That code was written back when we couldn't clobber r14. We can now,
+ * so we could probably optimize things a bit
+ */
+virt_page_table_tlb_miss:
+	/* Are we hitting a kernel page table ? */
+	andi.	r10,r15,0x8
+
+	/* The cool thing now is that r10 contains 0 for user and 8 for kernel,
+	 * and we happen to have the swapper_pg_dir at offset 8 from the user
+	 * pgdir in the PACA :-).
+	 */
+	add	r11,r10,r13
+
+	/* If kernel, we need to clear MAS1 TID */
+	beq	1f
+	/* XXX replace the RMW cycles with immediate loads + writes */
+	mfspr	r10,SPRN_MAS1
+	rlwinm	r10,r10,0,16,1			/* Clear TID */
+	mtspr	SPRN_MAS1,r10
+1:
+	/* Search if we already have a TLB entry for that virtual address, and
+	 * if we do, bail out.
+	 */
+	PPC_TLBSRX_DOT(0,r16)
+	beq	virt_page_table_tlb_miss_done
+
+	/* Now, we need to walk the page tables. First check if we are in
+	 * range.
+	 */
+	rldicl.	r10,r16,64-(VPTE_INDEX_SIZE+3),VPTE_INDEX_SIZE+3+4
+	bne-	virt_page_table_tlb_miss_fault
+
+	/* Get the PGD pointer */
+	ld	r15,PACAPGD(r11)
+	cmpldi	cr0,r15,0
+	beq-	virt_page_table_tlb_miss_fault
+
+	/* Get to PGD entry */
+	rldicl	r11,r16,64-VPTE_PGD_SHIFT,64-PGD_INDEX_SIZE-3
+	clrrdi	r10,r11,3
+	ldx	r15,r10,r15
+	cmpldi	cr0,r15,0
+	beq	virt_page_table_tlb_miss_fault
+
+#ifndef CONFIG_PPC_64K_PAGES
+	/* Get to PUD entry */
+	rldicl	r11,r16,64-VPTE_PUD_SHIFT,64-PUD_INDEX_SIZE-3
+	clrrdi	r10,r11,3
+	ldx	r15,r10,r15
+	cmpldi	cr0,r15,0
+	beq	virt_page_table_tlb_miss_fault
+#endif /* CONFIG_PPC_64K_PAGES */
+
+	/* Get to PMD entry */
+	rldicl	r11,r16,64-VPTE_PMD_SHIFT,64-PMD_INDEX_SIZE-3
+	clrrdi	r10,r11,3
+	ldx	r15,r10,r15
+	cmpldi	cr0,r15,0
+	beq	virt_page_table_tlb_miss_fault
+
+	/* Ok, we're all right, we can now create a kernel translation for
+	 * a 4K or 64K page from r16 -> r15.
+	 */
+	/* Now we build the MAS:
+	 *
+	 * MAS 0   :	Fully setup with defaults in MAS4 and TLBnCFG
+	 * MAS 1   :	Almost fully setup
+	 *               - PID already updated by caller if necessary
+	 *               - TSIZE for now is base page size always
+	 * MAS 2   :	Use defaults
+	 * MAS 3+7 :	Needs to be done
+	 *
+	 * So we only do MAS 2 and 3 for now...
+	 */
+	clrldi	r11,r15,4		/* remove region ID from RPN */
+	ori	r10,r11,1		/* Or-in SR */
+	mtspr	SPRN_MAS7_MAS3,r10
+
+	tlbwe
+
+virt_page_table_tlb_miss_done:
+
+	/* We have overriden MAS2:EPN but currently our primary TLB miss
+	 * handler will always restore it so that should not be an issue,
+	 * if we ever optimize the primary handler to not write MAS2 on
+	 * some cases, we'll have to restore MAS2:EPN here based on the
+	 * original fault's DEAR. If we do that we have to modify the
+	 * ITLB miss handler to also store SRR0 in the exception frame
+	 * as DEAR.
+	 *
+	 * However, one nasty thing we did is we cleared the reservation
+	 * (well, potentially we did). We do a trick here thus if we
+	 * are not a level 0 exception (we interrupted the TLB miss) we
+	 * offset the return address by -4 in order to replay the tlbsrx
+	 * instruction there
+	 */
+	subf	r10,r13,r12
+	cmpldi	cr0,r10,PACA_EXTLB+EX_TLB_SIZE
+	bne-	1f
+	ld	r11,PACA_EXTLB+EX_TLB_SIZE+EX_TLB_SRR0(r13)
+	addi	r10,r11,-4
+	std	r10,PACA_EXTLB+EX_TLB_SIZE+EX_TLB_SRR0(r13)
+1:
+	/* Return to caller, normal case */
+	TLB_MISS_STATS_X(MMSTAT_TLB_MISS_PT_OK);
+	TLB_MISS_EPILOG_SUCCESS
+	rfi
+
+virt_page_table_tlb_miss_fault:
+	/* If we fault here, things are a little bit tricky. We need to call
+	 * either data or instruction store fault, and we need to retreive
+	 * the original fault address and ESR (for data).
+	 *
+	 * The thing is, we know that in normal circumstances, this is
+	 * always called as a second level tlb miss for SW load or as a first
+	 * level TLB miss for HW load, so we should be able to peek at the
+	 * relevant informations in the first exception frame in the PACA.
+	 *
+	 * However, we do need to double check that, because we may just hit
+	 * a stray kernel pointer or a userland attack trying to hit those
+	 * areas. If that is the case, we do a data fault. (We can't get here
+	 * from an instruction tlb miss anyway).
+	 *
+	 * Note also that when going to a fault, we must unwind the previous
+	 * level as well. Since we are doing that, we don't need to clear or
+	 * restore the TLB reservation neither.
+	 */
+	subf	r10,r13,r12
+	cmpldi	cr0,r10,PACA_EXTLB+EX_TLB_SIZE
+	bne-	virt_page_table_tlb_miss_whacko_fault
+
+	/* We dig the original DEAR and ESR from slot 0 */
+	ld	r15,EX_TLB_DEAR+PACA_EXTLB(r13)
+	ld	r16,EX_TLB_ESR+PACA_EXTLB(r13)
+
+	/* We check for the "special" ESR value for instruction faults */
+	cmpdi	cr0,r16,-1
+	beq	1f
+	mtspr	SPRN_DEAR,r15
+	mtspr	SPRN_ESR,r16
+	TLB_MISS_STATS_D(MMSTAT_TLB_MISS_PT_FAULT);
+	TLB_MISS_EPILOG_ERROR
+	b	exc_data_storage_book3e
+1:	TLB_MISS_STATS_I(MMSTAT_TLB_MISS_PT_FAULT);
+	TLB_MISS_EPILOG_ERROR
+	b	exc_instruction_storage_book3e
+
+virt_page_table_tlb_miss_whacko_fault:
+	/* The linear fault will restart everything so ESR and DEAR will
+	 * not have been clobbered, let's just fault with what we have
+	 */
+	TLB_MISS_STATS_X(MMSTAT_TLB_MISS_PT_FAULT);
+	TLB_MISS_EPILOG_ERROR
+	b	exc_data_storage_book3e
+
+
+/**************************************************************
+ *                                                            *
+ * TLB miss handling for Book3E with hw page table support    *
+ *                                                            *
+ **************************************************************/
+
+
+/* Data TLB miss */
+	START_EXCEPTION(data_tlb_miss_htw)
+	TLB_MISS_PROLOG
+
+	/* Now we handle the fault proper. We only save DEAR in normal
+	 * fault case since that's the only interesting values here.
+	 * We could probably also optimize by not saving SRR0/1 in the
+	 * linear mapping case but I'll leave that for later
+	 */
+	mfspr	r14,SPRN_ESR
+	mfspr	r16,SPRN_DEAR		/* get faulting address */
+	srdi	r11,r16,60		/* get region */
+	cmpldi	cr0,r11,0xc		/* linear mapping ? */
+	TLB_MISS_STATS_SAVE_INFO
+	beq	tlb_load_linear		/* yes -> go to linear map load */
+
+	/* We do the user/kernel test for the PID here along with the RW test
+	 */
+	cmpldi	cr0,r11,0		/* Check for user region */
+	ld	r15,PACAPGD(r13)	/* Load user pgdir */
+	beq	htw_tlb_miss
+
+	/* XXX replace the RMW cycles with immediate loads + writes */
+1:	mfspr	r10,SPRN_MAS1
+	cmpldi	cr0,r11,8		/* Check for vmalloc region */
+	rlwinm	r10,r10,0,16,1		/* Clear TID */
+	mtspr	SPRN_MAS1,r10
+	ld	r15,PACA_KERNELPGD(r13)	/* Load kernel pgdir */
+	beq+	htw_tlb_miss
+
+	/* We got a crappy address, just fault with whatever DEAR and ESR
+	 * are here
+	 */
+	TLB_MISS_STATS_D(MMSTAT_TLB_MISS_NORM_FAULT)
+	TLB_MISS_EPILOG_ERROR
+	b	exc_data_storage_book3e
+
+/* Instruction TLB miss */
+	START_EXCEPTION(instruction_tlb_miss_htw)
+	TLB_MISS_PROLOG
+
+	/* If we take a recursive fault, the second level handler may need
+	 * to know whether we are handling a data or instruction fault in
+	 * order to get to the right store fault handler. We provide that
+	 * info by keeping a crazy value for ESR in r14
+	 */
+	li	r14,-1	/* store to exception frame is done later */
+
+	/* Now we handle the fault proper. We only save DEAR in the non
+	 * linear mapping case since we know the linear mapping case will
+	 * not re-enter. We could indeed optimize and also not save SRR0/1
+	 * in the linear mapping case but I'll leave that for later
+	 *
+	 * Faulting address is SRR0 which is already in r16
+	 */
+	srdi	r11,r16,60		/* get region */
+	cmpldi	cr0,r11,0xc		/* linear mapping ? */
+	TLB_MISS_STATS_SAVE_INFO
+	beq	tlb_load_linear		/* yes -> go to linear map load */
+
+	/* We do the user/kernel test for the PID here along with the RW test
+	 */
+	cmpldi	cr0,r11,0			/* Check for user region */
+	ld	r15,PACAPGD(r13)		/* Load user pgdir */
+	beq	htw_tlb_miss
+
+	/* XXX replace the RMW cycles with immediate loads + writes */
+1:	mfspr	r10,SPRN_MAS1
+	cmpldi	cr0,r11,8			/* Check for vmalloc region */
+	rlwinm	r10,r10,0,16,1			/* Clear TID */
+	mtspr	SPRN_MAS1,r10
+	ld	r15,PACA_KERNELPGD(r13)		/* Load kernel pgdir */
+	beq+	htw_tlb_miss
+
+	/* We got a crappy address, just fault */
+	TLB_MISS_STATS_I(MMSTAT_TLB_MISS_NORM_FAULT)
+	TLB_MISS_EPILOG_ERROR
+	b	exc_instruction_storage_book3e
+
+
+/*
+ * This is the guts of the second-level TLB miss handler for direct
+ * misses. We are entered with:
+ *
+ * r16 = virtual page table faulting address
+ * r15 = PGD pointer
+ * r14 = ESR
+ * r13 = PACA
+ * r12 = TLB exception frame in PACA
+ * r11 = crap (free to use)
+ * r10 = crap (free to use)
+ *
+ * It can be re-entered by the linear mapping miss handler. However, to
+ * avoid too much complication, it will save/restore things for us
+ */
+htw_tlb_miss:
+	/* Search if we already have a TLB entry for that virtual address, and
+	 * if we do, bail out.
+	 *
+	 * MAS1:IND should be already set based on MAS4
+	 */
+	PPC_TLBSRX_DOT(0,r16)
+	beq	htw_tlb_miss_done
+
+	/* Now, we need to walk the page tables. First check if we are in
+	 * range.
+	 */
+	rldicl.	r10,r16,64-PGTABLE_EADDR_SIZE,PGTABLE_EADDR_SIZE+4
+	bne-	htw_tlb_miss_fault
+
+	/* Get the PGD pointer */
+	cmpldi	cr0,r15,0
+	beq-	htw_tlb_miss_fault
+
+	/* Get to PGD entry */
+	rldicl	r11,r16,64-(PGDIR_SHIFT-3),64-PGD_INDEX_SIZE-3
+	clrrdi	r10,r11,3
+	ldx	r15,r10,r15
+	cmpldi	cr0,r15,0
+	beq	htw_tlb_miss_fault
+
+#ifndef CONFIG_PPC_64K_PAGES
+	/* Get to PUD entry */
+	rldicl	r11,r16,64-(PUD_SHIFT-3),64-PUD_INDEX_SIZE-3
+	clrrdi	r10,r11,3
+	ldx	r15,r10,r15
+	cmpldi	cr0,r15,0
+	beq	htw_tlb_miss_fault
+#endif /* CONFIG_PPC_64K_PAGES */
+
+	/* Get to PMD entry */
+	rldicl	r11,r16,64-(PMD_SHIFT-3),64-PMD_INDEX_SIZE-3
+	clrrdi	r10,r11,3
+	ldx	r15,r10,r15
+	cmpldi	cr0,r15,0
+	beq	htw_tlb_miss_fault
+
+	/* Ok, we're all right, we can now create an indirect entry for
+	 * a 1M or 256M page.
+	 *
+	 * The last trick is now that because we use "half" pages for
+	 * the HTW (1M IND is 2K and 256M IND is 32K) we need to account
+	 * for an added LSB bit to the RPN. For 64K pages, there is no
+	 * problem as we already use 32K arrays (half PTE pages), but for
+	 * 4K page we need to extract a bit from the virtual address and
+	 * insert it into the "PA52" bit of the RPN.
+	 */
+#ifndef CONFIG_PPC_64K_PAGES
+	rlwimi	r15,r16,32-9,20,20
+#endif
+	/* Now we build the MAS:
+	 *
+	 * MAS 0   :	Fully setup with defaults in MAS4 and TLBnCFG
+	 * MAS 1   :	Almost fully setup
+	 *               - PID already updated by caller if necessary
+	 *               - TSIZE for now is base ind page size always
+	 * MAS 2   :	Use defaults
+	 * MAS 3+7 :	Needs to be done
+	 */
+#ifdef CONFIG_PPC_64K_PAGES
+	ori	r10,r15,(BOOK3E_PAGESZ_64K << MAS3_SPSIZE_SHIFT)
+#else
+	ori	r10,r15,(BOOK3E_PAGESZ_4K << MAS3_SPSIZE_SHIFT)
+#endif
+	mtspr	SPRN_MAS7_MAS3,r10
+
+	tlbwe
+
+htw_tlb_miss_done:
+	/* We don't bother with restoring DEAR or ESR since we know we are
+	 * level 0 and just going back to userland. They are only needed
+	 * if you are going to take an access fault
+	 */
+	TLB_MISS_STATS_X(MMSTAT_TLB_MISS_PT_OK)
+	TLB_MISS_EPILOG_SUCCESS
+	rfi
+
+htw_tlb_miss_fault:
+	/* We need to check if it was an instruction miss. We know this
+	 * though because r14 would contain -1
+	 */
+	cmpdi	cr0,r14,-1
+	beq	1f
+	mtspr	SPRN_DEAR,r16
+	mtspr	SPRN_ESR,r14
+	TLB_MISS_STATS_D(MMSTAT_TLB_MISS_PT_FAULT)
+	TLB_MISS_EPILOG_ERROR
+	b	exc_data_storage_book3e
+1:	TLB_MISS_STATS_I(MMSTAT_TLB_MISS_PT_FAULT)
+	TLB_MISS_EPILOG_ERROR
+	b	exc_instruction_storage_book3e
+
+/*
+ * This is the guts of "any" level TLB miss handler for kernel linear
+ * mapping misses. We are entered with:
+ *
+ *
+ * r16 = faulting address
+ * r15 = crap (free to use)
+ * r14 = ESR (data) or -1 (instruction)
+ * r13 = PACA
+ * r12 = TLB exception frame in PACA
+ * r11 = crap (free to use)
+ * r10 = crap (free to use)
+ *
+ * In addition we know that we will not re-enter, so in theory, we could
+ * use a simpler epilog not restoring SRR0/1 etc.. but we'll do that later.
+ *
+ * We also need to be careful about MAS registers here & TLB reservation,
+ * as we know we'll have clobbered them if we interrupt the main TLB miss
+ * handlers in which case we probably want to do a full restart at level
+ * 0 rather than saving / restoring the MAS.
+ *
+ * Note: If we care about performance of that core, we can easily shuffle
+ *       a few things around
+ */
+tlb_load_linear:
+	/* For now, we assume the linear mapping is contiguous and stops at
+	 * linear_map_top. We also assume the size is a multiple of 1G, thus
+	 * we only use 1G pages for now. That might have to be changed in a
+	 * final implementation, especially when dealing with hypervisors
+	 */
+	ld	r11,PACATOC(r13)
+	ld	r11,linear_map_top@got(r11)
+	ld	r10,0(r11)
+	cmpld	cr0,r10,r16
+	bge	tlb_load_linear_fault
+
+	/* MAS1 need whole new setup. */
+	li	r15,(BOOK3E_PAGESZ_1GB<<MAS1_TSIZE_SHIFT)
+	oris	r15,r15,MAS1_VALID@h	/* MAS1 needs V and TSIZE */
+	mtspr	SPRN_MAS1,r15
+
+	/* Already somebody there ? */
+	PPC_TLBSRX_DOT(0,r16)
+	beq	tlb_load_linear_done
+
+	/* Now we build the remaining MAS. MAS0 and 2 should be fine
+	 * with their defaults, which leaves us with MAS 3 and 7. The
+	 * mapping is linear, so we just take the address, clear the
+	 * region bits, and or in the permission bits which are currently
+	 * hard wired
+	 */
+	clrrdi	r10,r16,30		/* 1G page index */
+	clrldi	r10,r10,4		/* clear region bits */
+	ori	r10,r10,MAS3_SR|MAS3_SW|MAS3_SX
+	mtspr	SPRN_MAS7_MAS3,r10
+
+	tlbwe
+
+tlb_load_linear_done:
+	/* We use the "error" epilog for success as we do want to
+	 * restore to the initial faulting context, whatever it was.
+	 * We do that because we can't resume a fault within a TLB
+	 * miss handler, due to MAS and TLB reservation being clobbered.
+	 */
+	TLB_MISS_STATS_X(MMSTAT_TLB_MISS_LINEAR)
+	TLB_MISS_EPILOG_ERROR
+	rfi
+
+tlb_load_linear_fault:
+	/* We keep the DEAR and ESR around, this shouldn't have happened */
+	cmpdi	cr0,r14,-1
+	beq	1f
+	TLB_MISS_EPILOG_ERROR_SPECIAL
+	b	exc_data_storage_book3e
+1:	TLB_MISS_EPILOG_ERROR_SPECIAL
+	b	exc_instruction_storage_book3e
+
+
+#ifdef CONFIG_BOOK3E_MMU_TLB_STATS
+.tlb_stat_inc:
+1:	ldarx	r8,0,r9
+	addi	r8,r8,1
+	stdcx.	r8,0,r9
+	bne-	1b
+	blr
+#endif
diff --git a/arch/powerpc/mm/tlb_nohash.c b/arch/powerpc/mm/tlb_nohash.c
index 6b43fc49f10..d16100c9416 100644
--- a/arch/powerpc/mm/tlb_nohash.c
+++ b/arch/powerpc/mm/tlb_nohash.c
@@ -7,8 +7,8 @@
  *
  *  -- BenH
  *
- * Copyright 2008 Ben Herrenschmidt <benh@kernel.crashing.org>
- *                IBM Corp.
+ * Copyright 2008,2009 Ben Herrenschmidt <benh@kernel.crashing.org>
+ *                     IBM Corp.
  *
  *  Derived from arch/ppc/mm/init.c:
  *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
@@ -34,12 +34,70 @@
 #include <linux/pagemap.h>
 #include <linux/preempt.h>
 #include <linux/spinlock.h>
+#include <linux/lmb.h>
 
 #include <asm/tlbflush.h>
 #include <asm/tlb.h>
+#include <asm/code-patching.h>
 
 #include "mmu_decl.h"
 
+#ifdef CONFIG_PPC_BOOK3E
+struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT] = {
+	[MMU_PAGE_4K] = {
+		.shift	= 12,
+		.enc	= BOOK3E_PAGESZ_4K,
+	},
+	[MMU_PAGE_16K] = {
+		.shift	= 14,
+		.enc	= BOOK3E_PAGESZ_16K,
+	},
+	[MMU_PAGE_64K] = {
+		.shift	= 16,
+		.enc	= BOOK3E_PAGESZ_64K,
+	},
+	[MMU_PAGE_1M] = {
+		.shift	= 20,
+		.enc	= BOOK3E_PAGESZ_1M,
+	},
+	[MMU_PAGE_16M] = {
+		.shift	= 24,
+		.enc	= BOOK3E_PAGESZ_16M,
+	},
+	[MMU_PAGE_256M] = {
+		.shift	= 28,
+		.enc	= BOOK3E_PAGESZ_256M,
+	},
+	[MMU_PAGE_1G] = {
+		.shift	= 30,
+		.enc	= BOOK3E_PAGESZ_1GB,
+	},
+};
+static inline int mmu_get_tsize(int psize)
+{
+	return mmu_psize_defs[psize].enc;
+}
+#else
+static inline int mmu_get_tsize(int psize)
+{
+	/* This isn't used on !Book3E for now */
+	return 0;
+}
+#endif
+
+/* The variables below are currently only used on 64-bit Book3E
+ * though this will probably be made common with other nohash
+ * implementations at some point
+ */
+#ifdef CONFIG_PPC64
+
+int mmu_linear_psize;		/* Page size used for the linear mapping */
+int mmu_pte_psize;		/* Page size used for PTE pages */
+int book3e_htw_enabled;		/* Is HW tablewalk enabled ? */
+unsigned long linear_map_top;	/* Top of linear mapping */
+
+#endif /* CONFIG_PPC64 */
+
 /*
  * Base TLB flushing operations:
  *
@@ -82,7 +140,7 @@ void __local_flush_tlb_page(struct mm_struct *mm, unsigned long vmaddr,
 void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr)
 {
 	__local_flush_tlb_page(vma ? vma->vm_mm : NULL, vmaddr,
-			       0 /* tsize unused for now */, 0);
+			       mmu_get_tsize(mmu_virtual_psize), 0);
 }
 EXPORT_SYMBOL(local_flush_tlb_page);
 
@@ -198,7 +256,7 @@ void __flush_tlb_page(struct mm_struct *mm, unsigned long vmaddr,
 void flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr)
 {
 	__flush_tlb_page(vma ? vma->vm_mm : NULL, vmaddr,
-			 0 /* tsize unused for now */, 0);
+			 mmu_get_tsize(mmu_virtual_psize), 0);
 }
 EXPORT_SYMBOL(flush_tlb_page);
 
@@ -241,3 +299,140 @@ void tlb_flush(struct mmu_gather *tlb)
 	/* Push out batch of freed page tables */
 	pte_free_finish();
 }
+
+/*
+ * Below are functions specific to the 64-bit variant of Book3E though that
+ * may change in the future
+ */
+
+#ifdef CONFIG_PPC64
+
+/*
+ * Handling of virtual linear page tables or indirect TLB entries
+ * flushing when PTE pages are freed
+ */
+void tlb_flush_pgtable(struct mmu_gather *tlb, unsigned long address)
+{
+	int tsize = mmu_psize_defs[mmu_pte_psize].enc;
+
+	if (book3e_htw_enabled) {
+		unsigned long start = address & PMD_MASK;
+		unsigned long end = address + PMD_SIZE;
+		unsigned long size = 1UL << mmu_psize_defs[mmu_pte_psize].shift;
+
+		/* This isn't the most optimal, ideally we would factor out the
+		 * while preempt & CPU mask mucking around, or even the IPI but
+		 * it will do for now
+		 */
+		while (start < end) {
+			__flush_tlb_page(tlb->mm, start, tsize, 1);
+			start += size;
+		}
+	} else {
+		unsigned long rmask = 0xf000000000000000ul;
+		unsigned long rid = (address & rmask) | 0x1000000000000000ul;
+		unsigned long vpte = address & ~rmask;
+
+#ifdef CONFIG_PPC_64K_PAGES
+		vpte = (vpte >> (PAGE_SHIFT - 4)) & ~0xfffful;
+#else
+		vpte = (vpte >> (PAGE_SHIFT - 3)) & ~0xffful;
+#endif
+		vpte |= rid;
+		__flush_tlb_page(tlb->mm, vpte, tsize, 0);
+	}
+}
+
+/*
+ * Early initialization of the MMU TLB code
+ */
+static void __early_init_mmu(int boot_cpu)
+{
+	extern unsigned int interrupt_base_book3e;
+	extern unsigned int exc_data_tlb_miss_htw_book3e;
+	extern unsigned int exc_instruction_tlb_miss_htw_book3e;
+
+	unsigned int *ibase = &interrupt_base_book3e;
+	unsigned int mas4;
+
+	/* XXX This will have to be decided at runtime, but right
+	 * now our boot and TLB miss code hard wires it
+	 */
+	mmu_linear_psize = MMU_PAGE_1G;
+
+
+	/* Check if HW tablewalk is present, and if yes, enable it by:
+	 *
+	 * - patching the TLB miss handlers to branch to the
+	 *   one dedicates to it
+	 *
+	 * - setting the global book3e_htw_enabled
+	 *
+	 * - Set MAS4:INDD and default page size
+	 */
+
+	/* XXX This code only checks for TLB 0 capabilities and doesn't
+	 *     check what page size combos are supported by the HW. It
+	 *     also doesn't handle the case where a separate array holds
+	 *     the IND entries from the array loaded by the PT.
+	 */
+	if (boot_cpu) {
+		unsigned int tlb0cfg = mfspr(SPRN_TLB0CFG);
+
+		/* Check if HW loader is supported */
+		if ((tlb0cfg & TLBnCFG_IND) &&
+		    (tlb0cfg & TLBnCFG_PT)) {
+			patch_branch(ibase + (0x1c0 / 4),
+			     (unsigned long)&exc_data_tlb_miss_htw_book3e, 0);
+			patch_branch(ibase + (0x1e0 / 4),
+			     (unsigned long)&exc_instruction_tlb_miss_htw_book3e, 0);
+			book3e_htw_enabled = 1;
+		}
+		pr_info("MMU: Book3E Page Tables %s\n",
+			book3e_htw_enabled ? "Enabled" : "Disabled");
+	}
+
+	/* Set MAS4 based on page table setting */
+
+	mas4 = 0x4 << MAS4_WIMGED_SHIFT;
+	if (book3e_htw_enabled) {
+		mas4 |= mas4 | MAS4_INDD;
+#ifdef CONFIG_PPC_64K_PAGES
+		mas4 |=	BOOK3E_PAGESZ_256M << MAS4_TSIZED_SHIFT;
+		mmu_pte_psize = MMU_PAGE_256M;
+#else
+		mas4 |=	BOOK3E_PAGESZ_1M << MAS4_TSIZED_SHIFT;
+		mmu_pte_psize = MMU_PAGE_1M;
+#endif
+	} else {
+#ifdef CONFIG_PPC_64K_PAGES
+		mas4 |=	BOOK3E_PAGESZ_64K << MAS4_TSIZED_SHIFT;
+#else
+		mas4 |=	BOOK3E_PAGESZ_4K << MAS4_TSIZED_SHIFT;
+#endif
+		mmu_pte_psize = mmu_virtual_psize;
+	}
+	mtspr(SPRN_MAS4, mas4);
+
+	/* Set the global containing the top of the linear mapping
+	 * for use by the TLB miss code
+	 */
+	linear_map_top = lmb_end_of_DRAM();
+
+	/* A sync won't hurt us after mucking around with
+	 * the MMU configuration
+	 */
+	mb();
+}
+
+void __init early_init_mmu(void)
+{
+	__early_init_mmu(1);
+}
+
+void __cpuinit early_init_mmu_secondary(void)
+{
+	__early_init_mmu(0);
+}
+
+#endif /* CONFIG_PPC64 */
diff --git a/arch/powerpc/mm/tlb_nohash_low.S b/arch/powerpc/mm/tlb_nohash_low.S
index c7d89a0adba..7bcd9fbf6cc 100644
--- a/arch/powerpc/mm/tlb_nohash_low.S
+++ b/arch/powerpc/mm/tlb_nohash_low.S
@@ -191,6 +191,85 @@ ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_USE_TLBILX)
 	isync
 1:	wrtee	r10
 	blr
+#elif defined(CONFIG_PPC_BOOK3E)
+/*
+ * New Book3E (>= 2.06) implementation
+ *
+ * Note: We may be able to get away without the interrupt masking stuff
+ * if we save/restore MAS6 on exceptions that might modify it
+ */
+_GLOBAL(_tlbil_pid)
+	slwi	r4,r3,MAS6_SPID_SHIFT
+	mfmsr	r10
+	wrteei	0
+	mtspr	SPRN_MAS6,r4
+	PPC_TLBILX_PID(0,0)
+	wrtee	r10
+	msync
+	isync
+	blr
+
+_GLOBAL(_tlbil_pid_noind)
+	slwi	r4,r3,MAS6_SPID_SHIFT
+	mfmsr	r10
+	ori	r4,r4,MAS6_SIND
+	wrteei	0
+	mtspr	SPRN_MAS6,r4
+	PPC_TLBILX_PID(0,0)
+	wrtee	r10
+	msync
+	isync
+	blr
+
+_GLOBAL(_tlbil_all)
+	PPC_TLBILX_ALL(0,0)
+	msync
+	isync
+	blr
+
+_GLOBAL(_tlbil_va)
+	mfmsr	r10
+	wrteei	0
+	cmpwi	cr0,r6,0
+	slwi	r4,r4,MAS6_SPID_SHIFT
+	rlwimi	r4,r5,MAS6_ISIZE_SHIFT,MAS6_ISIZE_MASK
+	beq	1f
+	rlwimi	r4,r6,MAS6_SIND_SHIFT,MAS6_SIND
+1:	mtspr	SPRN_MAS6,r4		/* assume AS=0 for now */
+	PPC_TLBILX_VA(0,r3)
+	msync
+	isync
+	wrtee	r10
+	blr
+
+_GLOBAL(_tlbivax_bcast)
+	mfmsr	r10
+	wrteei	0
+	cmpwi	cr0,r6,0
+	slwi	r4,r4,MAS6_SPID_SHIFT
+	rlwimi	r4,r5,MAS6_ISIZE_SHIFT,MAS6_ISIZE_MASK
+	beq	1f
+	rlwimi	r4,r6,MAS6_SIND_SHIFT,MAS6_SIND
+1:	mtspr	SPRN_MAS6,r4		/* assume AS=0 for now */
+	PPC_TLBIVAX(0,r3)
+	eieio
+	tlbsync
+	sync
+	wrtee	r10
+	blr
+
+_GLOBAL(set_context)
+#ifdef CONFIG_BDI_SWITCH
+	/* Context switch the PTE pointer for the Abatron BDI2000.
+	 * The PGDIR is the second parameter.
+	 */
+	lis	r5, abatron_pteptrs@h
+	ori	r5, r5, abatron_pteptrs@l
+	stw	r4, 0x4(r5)
+#endif
+	mtspr	SPRN_PID,r3
+	isync			/* Force context change */
+	blr
 #else
 #error Unsupported processor type !
 #endif
-- 
cgit v1.2.3


From 32a74949b7337726e76d69f51c48715431126c6c Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Thu, 23 Jul 2009 23:15:58 +0000
Subject: powerpc/mm: Add support for SPARSEMEM_VMEMMAP on 64-bit Book3E

The base TLB support didn't include support for SPARSEMEM_VMEMMAP, though
we did carve out some virtual space for it, the necessary support code
wasn't there. This implements it by using 16M pages for now, though the
page size could easily be changed at runtime if necessary.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/mmu-book3e.h    |  1 +
 arch/powerpc/include/asm/pgtable-ppc64.h |  3 +-
 arch/powerpc/mm/init_64.c                | 55 ++++++++++++++++++++++++++++----
 arch/powerpc/mm/mmu_decl.h               |  7 +++-
 arch/powerpc/mm/pgtable_64.c             |  2 +-
 arch/powerpc/mm/tlb_nohash.c             | 11 ++++++-
 6 files changed, 68 insertions(+), 11 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/mmu-book3e.h b/arch/powerpc/include/asm/mmu-book3e.h
index 6ddbe48d07f..d7458046936 100644
--- a/arch/powerpc/include/asm/mmu-book3e.h
+++ b/arch/powerpc/include/asm/mmu-book3e.h
@@ -196,6 +196,7 @@ extern struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT];
 #endif
 
 extern int mmu_linear_psize;
+extern int mmu_vmemmap_psize;
 
 #endif /* !__ASSEMBLY__ */
 
diff --git a/arch/powerpc/include/asm/pgtable-ppc64.h b/arch/powerpc/include/asm/pgtable-ppc64.h
index 7254c5a3187..200ec2dfa03 100644
--- a/arch/powerpc/include/asm/pgtable-ppc64.h
+++ b/arch/powerpc/include/asm/pgtable-ppc64.h
@@ -46,6 +46,7 @@
 /*
  * The vmalloc space starts at the beginning of that region, and
  * occupies half of it on hash CPUs and a quarter of it on Book3E
+ * (we keep a quarter for the virtual memmap)
  */
 #define VMALLOC_START	KERN_VIRT_START
 #ifdef CONFIG_PPC_BOOK3E
@@ -83,7 +84,7 @@
 
 #define VMALLOC_REGION_ID	(REGION_ID(VMALLOC_START))
 #define KERNEL_REGION_ID	(REGION_ID(PAGE_OFFSET))
-#define VMEMMAP_REGION_ID	(0xfUL)
+#define VMEMMAP_REGION_ID	(0xfUL)	/* Server only */
 #define USER_REGION_ID		(0UL)
 
 /*
diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c
index 68a821add28..31582329cd6 100644
--- a/arch/powerpc/mm/init_64.c
+++ b/arch/powerpc/mm/init_64.c
@@ -205,6 +205,47 @@ static int __meminit vmemmap_populated(unsigned long start, int page_size)
 	return 0;
 }
 
+/* On hash-based CPUs, the vmemmap is bolted in the hash table.
+ *
+ * On Book3E CPUs, the vmemmap is currently mapped in the top half of
+ * the vmalloc space using normal page tables, though the size of
+ * pages encoded in the PTEs can be different
+ */
+
+#ifdef CONFIG_PPC_BOOK3E
+static void __meminit vmemmap_create_mapping(unsigned long start,
+					     unsigned long page_size,
+					     unsigned long phys)
+{
+	/* Create a PTE encoding without page size */
+	unsigned long i, flags = _PAGE_PRESENT | _PAGE_ACCESSED |
+		_PAGE_KERNEL_RW;
+
+	/* PTEs only contain page size encodings up to 32M */
+	BUG_ON(mmu_psize_defs[mmu_vmemmap_psize].enc > 0xf);
+
+	/* Encode the size in the PTE */
+	flags |= mmu_psize_defs[mmu_vmemmap_psize].enc << 8;
+
+	/* For each PTE for that area, map things. Note that we don't
+	 * increment phys because all PTEs are of the large size and
+	 * thus must have the low bits clear
+	 */
+	for (i = 0; i < page_size; i += PAGE_SIZE)
+		BUG_ON(map_kernel_page(start + i, phys, flags));
+}
+#else /* CONFIG_PPC_BOOK3E */
+static void __meminit vmemmap_create_mapping(unsigned long start,
+					     unsigned long page_size,
+					     unsigned long phys)
+{
+	int  mapped = htab_bolt_mapping(start, start + page_size, phys,
+					PAGE_KERNEL, mmu_vmemmap_psize,
+					mmu_kernel_ssize);
+	BUG_ON(mapped < 0);
+}
+#endif /* CONFIG_PPC_BOOK3E */
+
 int __meminit vmemmap_populate(struct page *start_page,
 			       unsigned long nr_pages, int node)
 {
@@ -215,8 +256,11 @@ int __meminit vmemmap_populate(struct page *start_page,
 	/* Align to the page size of the linear mapping. */
 	start = _ALIGN_DOWN(start, page_size);
 
+	pr_debug("vmemmap_populate page %p, %ld pages, node %d\n",
+		 start_page, nr_pages, node);
+	pr_debug(" -> map %lx..%lx\n", start, end);
+
 	for (; start < end; start += page_size) {
-		int mapped;
 		void *p;
 
 		if (vmemmap_populated(start, page_size))
@@ -226,13 +270,10 @@ int __meminit vmemmap_populate(struct page *start_page,
 		if (!p)
 			return -ENOMEM;
 
-		pr_debug("vmemmap %08lx allocated at %p, physical %08lx.\n",
-			start, p, __pa(p));
+		pr_debug("      * %016lx..%016lx allocated at %p\n",
+			 start, start + page_size, p);
 
-		mapped = htab_bolt_mapping(start, start + page_size, __pa(p),
-					   pgprot_val(PAGE_KERNEL),
-					   mmu_vmemmap_psize, mmu_kernel_ssize);
-		BUG_ON(mapped < 0);
+		vmemmap_create_mapping(start, page_size, __pa(p));
 	}
 
 	return 0;
diff --git a/arch/powerpc/mm/mmu_decl.h b/arch/powerpc/mm/mmu_decl.h
index 5961c6b739d..d2e5321d5ea 100644
--- a/arch/powerpc/mm/mmu_decl.h
+++ b/arch/powerpc/mm/mmu_decl.h
@@ -121,7 +121,12 @@ extern unsigned int rtas_data, rtas_size;
 struct hash_pte;
 extern struct hash_pte *Hash, *Hash_end;
 extern unsigned long Hash_size, Hash_mask;
-#endif
+
+#endif /* CONFIG_PPC32 */
+
+#ifdef CONFIG_PPC64
+extern int map_kernel_page(unsigned long ea, unsigned long pa, int flags);
+#endif /* CONFIG_PPC64 */
 
 extern unsigned long ioremap_bot;
 extern unsigned long __max_low_memory;
diff --git a/arch/powerpc/mm/pgtable_64.c b/arch/powerpc/mm/pgtable_64.c
index 93ed1a3c872..853d5565eed 100644
--- a/arch/powerpc/mm/pgtable_64.c
+++ b/arch/powerpc/mm/pgtable_64.c
@@ -79,7 +79,7 @@ static void *early_alloc_pgtable(unsigned long size)
  * map_kernel_page adds an entry to the ioremap page table
  * and adds an entry to the HPT, possibly bolting it
  */
-static int map_kernel_page(unsigned long ea, unsigned long pa, int flags)
+int map_kernel_page(unsigned long ea, unsigned long pa, int flags)
 {
 	pgd_t *pgdp;
 	pud_t *pudp;
diff --git a/arch/powerpc/mm/tlb_nohash.c b/arch/powerpc/mm/tlb_nohash.c
index d16100c9416..2fbc680c2c7 100644
--- a/arch/powerpc/mm/tlb_nohash.c
+++ b/arch/powerpc/mm/tlb_nohash.c
@@ -93,6 +93,7 @@ static inline int mmu_get_tsize(int psize)
 
 int mmu_linear_psize;		/* Page size used for the linear mapping */
 int mmu_pte_psize;		/* Page size used for PTE pages */
+int mmu_vmemmap_psize;		/* Page size used for the virtual mem map */
 int book3e_htw_enabled;		/* Is HW tablewalk enabled ? */
 unsigned long linear_map_top;	/* Top of linear mapping */
 
@@ -356,10 +357,18 @@ static void __early_init_mmu(int boot_cpu)
 	unsigned int mas4;
 
 	/* XXX This will have to be decided at runtime, but right
-	 * now our boot and TLB miss code hard wires it
+	 * now our boot and TLB miss code hard wires it. Ideally
+	 * we should find out a suitable page size and patch the
+	 * TLB miss code (either that or use the PACA to store
+	 * the value we want)
 	 */
 	mmu_linear_psize = MMU_PAGE_1G;
 
+	/* XXX This should be decided at runtime based on supported
+	 * page sizes in the TLB, but for now let's assume 16M is
+	 * always there and a good fit (which it probably is)
+	 */
+	mmu_vmemmap_psize = MMU_PAGE_16M;
 
 	/* Check if HW tablewalk is present, and if yes, enable it by:
 	 *
-- 
cgit v1.2.3


From 2d27cfd3286966c04d4192a9db5a6c7ea60eebf1 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Thu, 23 Jul 2009 23:15:59 +0000
Subject: powerpc: Remaining 64-bit Book3E support

This contains all the bits that didn't fit in previous patches :-) This
includes the actual exception handlers assembly, the changes to the
kernel entry, other misc bits and wiring it all up in Kconfig.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/Kconfig                   |   2 +-
 arch/powerpc/include/asm/hw_irq.h      |   5 +
 arch/powerpc/include/asm/smp.h         |   1 +
 arch/powerpc/kernel/Makefile           |  10 +-
 arch/powerpc/kernel/cputable.c         |  27 +-
 arch/powerpc/kernel/entry_64.S         |  60 ++-
 arch/powerpc/kernel/exceptions-64e.S   | 784 +++++++++++++++++++++++++++++++++
 arch/powerpc/kernel/head_64.S          |  68 ++-
 arch/powerpc/kernel/setup_64.c         |  19 +
 arch/powerpc/mm/Makefile               |   1 +
 arch/powerpc/platforms/Kconfig.cputype |  38 +-
 arch/powerpc/xmon/xmon.c               |   2 +-
 12 files changed, 993 insertions(+), 24 deletions(-)
 create mode 100644 arch/powerpc/kernel/exceptions-64e.S

(limited to 'arch')

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 52349ef1b3a..4c0747e8ed7 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -472,7 +472,7 @@ config PPC_16K_PAGES
 	bool "16k page size" if 44x
 
 config PPC_64K_PAGES
-	bool "64k page size" if 44x || PPC_STD_MMU_64
+	bool "64k page size" if 44x || PPC_STD_MMU_64 || PPC_BOOK3E_64
 	select PPC_HAS_HASH_64K if PPC_STD_MMU_64
 
 config PPC_256K_PAGES
diff --git a/arch/powerpc/include/asm/hw_irq.h b/arch/powerpc/include/asm/hw_irq.h
index 8b505eaaa38..e73d554538d 100644
--- a/arch/powerpc/include/asm/hw_irq.h
+++ b/arch/powerpc/include/asm/hw_irq.h
@@ -49,8 +49,13 @@ extern void iseries_handle_interrupts(void);
 #define raw_irqs_disabled()		(local_get_flags() == 0)
 #define raw_irqs_disabled_flags(flags)	((flags) == 0)
 
+#ifdef CONFIG_PPC_BOOK3E
+#define __hard_irq_enable()	__asm__ __volatile__("wrteei 1": : :"memory");
+#define __hard_irq_disable()	__asm__ __volatile__("wrteei 0": : :"memory");
+#else
 #define __hard_irq_enable()	__mtmsrd(mfmsr() | MSR_EE, 1)
 #define __hard_irq_disable()	__mtmsrd(mfmsr() & ~MSR_EE, 1)
+#endif
 
 #define  hard_irq_disable()			\
 	do {					\
diff --git a/arch/powerpc/include/asm/smp.h b/arch/powerpc/include/asm/smp.h
index e782f43ee66..c0d3b8af931 100644
--- a/arch/powerpc/include/asm/smp.h
+++ b/arch/powerpc/include/asm/smp.h
@@ -153,6 +153,7 @@ extern void arch_send_call_function_ipi(cpumask_t mask);
  * 64-bit but defining them all here doesn't harm
  */
 extern void generic_secondary_smp_init(void);
+extern void generic_secondary_thread_init(void);
 extern unsigned long __secondary_hold_spinloop;
 extern unsigned long __secondary_hold_acknowledge;
 extern char __secondary_hold;
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index b73396b9390..035946f9d5f 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -33,10 +33,10 @@ obj-y				:= cputable.o ptrace.o syscalls.o \
 obj-y				+= vdso32/
 obj-$(CONFIG_PPC64)		+= setup_64.o sys_ppc32.o \
 				   signal_64.o ptrace32.o \
-				   paca.o cpu_setup_ppc970.o \
-				   cpu_setup_pa6t.o \
-				   firmware.o nvram_64.o
+				   paca.o nvram_64.o firmware.o
+obj-$(CONFIG_PPC_BOOK3S_64)	+= cpu_setup_ppc970.o cpu_setup_pa6t.o
 obj64-$(CONFIG_RELOCATABLE)	+= reloc_64.o
+obj-$(CONFIG_PPC_BOOK3E_64)	+= exceptions-64e.o
 obj-$(CONFIG_PPC64)		+= vdso64/
 obj-$(CONFIG_ALTIVEC)		+= vecemu.o
 obj-$(CONFIG_PPC_970_NAP)	+= idle_power4.o
@@ -63,8 +63,8 @@ obj-$(CONFIG_MODULES)		+= module.o module_$(CONFIG_WORD_SIZE).o
 obj-$(CONFIG_44x)		+= cpu_setup_44x.o
 obj-$(CONFIG_FSL_BOOKE)		+= cpu_setup_fsl_booke.o dbell.o
 
-extra-$(CONFIG_PPC_STD_MMU)	:= head_32.o
-extra-$(CONFIG_PPC64)		:= head_64.o
+extra-y				:= head_$(CONFIG_WORD_SIZE).o
+extra-$(CONFIG_PPC_BOOK3E_32)	:= head_new_booke.o
 extra-$(CONFIG_40x)		:= head_40x.o
 extra-$(CONFIG_44x)		:= head_44x.o
 extra-$(CONFIG_FSL_BOOKE)	:= head_fsl_booke.o
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index 4a24a2fc457..f34ea37079b 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -93,7 +93,7 @@ extern void __restore_cpu_power7(void);
 				 PPC_FEATURE_BOOKE)
 
 static struct cpu_spec __initdata cpu_specs[] = {
-#ifdef CONFIG_PPC64
+#ifdef CONFIG_PPC_BOOK3S_64
 	{	/* Power3 */
 		.pvr_mask		= 0xffff0000,
 		.pvr_value		= 0x00400000,
@@ -508,7 +508,30 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.machine_check		= machine_check_generic,
 		.platform		= "power4",
 	}
-#endif	/* CONFIG_PPC64 */
+#endif	/* CONFIG_PPC_BOOK3S_64 */
+#ifdef CONFIG_PPC_BOOK3E_64
+	{	/* This is a default entry to get going, to be replaced by
+		 * a real one at some stage
+		 */
+#define CPU_FTRS_BASE_BOOK3E	(CPU_FTR_USE_TB | \
+	    CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_SMT | \
+	    CPU_FTR_NODSISRALIGN | CPU_FTR_NOEXECUTE)
+		.pvr_mask		= 0x00000000,
+		.pvr_value		= 0x00000000,
+		.cpu_name		= "Book3E",
+		.cpu_features		= CPU_FTRS_BASE_BOOK3E,
+		.cpu_user_features	= COMMON_USER_PPC64,
+		.mmu_features		= MMU_FTR_TYPE_3E | MMU_FTR_USE_TLBILX |
+					  MMU_FTR_USE_TLBIVAX_BCAST |
+					  MMU_FTR_LOCK_BCAST_INVAL,
+		.icache_bsize		= 64,
+		.dcache_bsize		= 64,
+		.num_pmcs		= 0,
+		.machine_check		= machine_check_generic,
+		.platform		= "power6",
+	},
+#endif
+
 #ifdef CONFIG_PPC32
 #if CLASSIC_PPC
 	{	/* 601 */
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index 1cb0f3d1714..66bcda34a6b 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -120,9 +120,15 @@ BEGIN_FW_FTR_SECTION
 2:
 END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
 #endif /* CONFIG_PPC_ISERIES */
+
+	/* Hard enable interrupts */
+#ifdef CONFIG_PPC_BOOK3E
+	wrteei	1
+#else
 	mfmsr	r11
 	ori	r11,r11,MSR_EE
 	mtmsrd	r11,1
+#endif /* CONFIG_PPC_BOOK3E */
 
 #ifdef SHOW_SYSCALLS
 	bl	.do_show_syscall
@@ -168,15 +174,25 @@ syscall_exit:
 #endif
 	clrrdi	r12,r1,THREAD_SHIFT
 
-	/* disable interrupts so current_thread_info()->flags can't change,
-	   and so that we don't get interrupted after loading SRR0/1. */
 	ld	r8,_MSR(r1)
+#ifdef CONFIG_PPC_BOOK3S
+	/* No MSR:RI on BookE */
 	andi.	r10,r8,MSR_RI
 	beq-	unrecov_restore
+#endif
+
+	/* Disable interrupts so current_thread_info()->flags can't change,
+	 * and so that we don't get interrupted after loading SRR0/1.
+	 */
+#ifdef CONFIG_PPC_BOOK3E
+	wrteei	0
+#else
 	mfmsr	r10
 	rldicl	r10,r10,48,1
 	rotldi	r10,r10,16
 	mtmsrd	r10,1
+#endif /* CONFIG_PPC_BOOK3E */
+
 	ld	r9,TI_FLAGS(r12)
 	li	r11,-_LAST_ERRNO
 	andi.	r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP|_TIF_USER_WORK_MASK|_TIF_PERSYSCALL_MASK)
@@ -194,9 +210,13 @@ syscall_error_cont:
 	 * userspace and we take an exception after restoring r13,
 	 * we end up corrupting the userspace r13 value.
 	 */
+#ifdef CONFIG_PPC_BOOK3S
+	/* No MSR:RI on BookE */
 	li	r12,MSR_RI
 	andc	r11,r10,r12
 	mtmsrd	r11,1			/* clear MSR.RI */
+#endif /* CONFIG_PPC_BOOK3S */
+
 	beq-	1f
 	ACCOUNT_CPU_USER_EXIT(r11, r12)
 	ld	r13,GPR13(r1)	/* only restore r13 if returning to usermode */
@@ -206,7 +226,7 @@ syscall_error_cont:
 	mtcr	r5
 	mtspr	SPRN_SRR0,r7
 	mtspr	SPRN_SRR1,r8
-	rfid
+	RFI
 	b	.	/* prevent speculative execution */
 
 syscall_error:	
@@ -276,9 +296,13 @@ syscall_exit_work:
 	beq	.ret_from_except_lite
 
 	/* Re-enable interrupts */
+#ifdef CONFIG_PPC_BOOK3E
+	wrteei	1
+#else
 	mfmsr	r10
 	ori	r10,r10,MSR_EE
 	mtmsrd	r10,1
+#endif /* CONFIG_PPC_BOOK3E */
 
 	bl	.save_nvgprs
 	addi	r3,r1,STACK_FRAME_OVERHEAD
@@ -380,7 +404,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
 	and.	r0,r0,r22
 	beq+	1f
 	andc	r22,r22,r0
-	mtmsrd	r22
+	MTMSRD(r22)
 	isync
 1:	std	r20,_NIP(r1)
 	mfcr	r23
@@ -399,6 +423,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
 	std	r6,PACACURRENT(r13)	/* Set new 'current' */
 
 	ld	r8,KSP(r4)	/* new stack pointer */
+#ifdef CONFIG_PPC_BOOK3S
 BEGIN_FTR_SECTION
   BEGIN_FTR_SECTION_NESTED(95)
 	clrrdi	r6,r8,28	/* get its ESID */
@@ -445,8 +470,9 @@ END_FTR_SECTION_IFSET(CPU_FTR_1T_SEGMENT)
 	slbie	r6		/* Workaround POWER5 < DD2.1 issue */
 	slbmte	r7,r0
 	isync
-
 2:
+#endif /* !CONFIG_PPC_BOOK3S */
+
 	clrrdi	r7,r8,THREAD_SHIFT	/* base of new stack */
 	/* Note: this uses SWITCH_FRAME_SIZE rather than INT_FRAME_SIZE
 	   because we don't need to leave the 288-byte ABI gap at the
@@ -490,10 +516,14 @@ _GLOBAL(ret_from_except_lite)
 	 * can't change between when we test it and when we return
 	 * from the interrupt.
 	 */
+#ifdef CONFIG_PPC_BOOK3E
+	wrteei	0
+#else
 	mfmsr	r10		/* Get current interrupt state */
 	rldicl	r9,r10,48,1	/* clear MSR_EE */
 	rotldi	r9,r9,16
 	mtmsrd	r9,1		/* Update machine state */
+#endif /* CONFIG_PPC_BOOK3E */
 
 #ifdef CONFIG_PREEMPT
 	clrrdi	r9,r1,THREAD_SHIFT	/* current_thread_info() */
@@ -540,6 +570,9 @@ ALT_FW_FTR_SECTION_END_IFCLR(FW_FEATURE_ISERIES)
 	rldicl	r4,r3,49,63		/* r0 = (r3 >> 15) & 1 */
 	stb	r4,PACAHARDIRQEN(r13)
 
+#ifdef CONFIG_PPC_BOOK3E
+	b	.exception_return_book3e
+#else
 	ld	r4,_CTR(r1)
 	ld	r0,_LINK(r1)
 	mtctr	r4
@@ -588,6 +621,8 @@ ALT_FW_FTR_SECTION_END_IFCLR(FW_FEATURE_ISERIES)
 	rfid
 	b	.	/* prevent speculative execution */
 
+#endif /* CONFIG_PPC_BOOK3E */
+
 iseries_check_pending_irqs:
 #ifdef CONFIG_PPC_ISERIES
 	ld	r5,SOFTE(r1)
@@ -638,6 +673,11 @@ do_work:
 	li	r0,1
 	stb	r0,PACASOFTIRQEN(r13)
 	stb	r0,PACAHARDIRQEN(r13)
+#ifdef CONFIG_PPC_BOOK3E
+	wrteei	1
+	bl	.preempt_schedule
+	wrteei	0
+#else
 	ori	r10,r10,MSR_EE
 	mtmsrd	r10,1		/* reenable interrupts */
 	bl	.preempt_schedule
@@ -646,6 +686,7 @@ do_work:
 	rldicl	r10,r10,48,1	/* disable interrupts again */
 	rotldi	r10,r10,16
 	mtmsrd	r10,1
+#endif /* CONFIG_PPC_BOOK3E */
 	ld	r4,TI_FLAGS(r9)
 	andi.	r0,r4,_TIF_NEED_RESCHED
 	bne	1b
@@ -654,8 +695,12 @@ do_work:
 user_work:
 #endif
 	/* Enable interrupts */
+#ifdef CONFIG_PPC_BOOK3E
+	wrteei	1
+#else
 	ori	r10,r10,MSR_EE
 	mtmsrd	r10,1
+#endif /* CONFIG_PPC_BOOK3E */
 
 	andi.	r0,r4,_TIF_NEED_RESCHED
 	beq	1f
@@ -837,6 +882,10 @@ _GLOBAL(enter_prom)
 
 	/* Switch MSR to 32 bits mode
 	 */
+#ifdef CONFIG_PPC_BOOK3E
+	rlwinm	r11,r11,0,1,31
+	mtmsr	r11
+#else /* CONFIG_PPC_BOOK3E */
         mfmsr   r11
         li      r12,1
         rldicr  r12,r12,MSR_SF_LG,(63-MSR_SF_LG)
@@ -845,6 +894,7 @@ _GLOBAL(enter_prom)
         rldicr  r12,r12,MSR_ISF_LG,(63-MSR_ISF_LG)
         andc    r11,r11,r12
         mtmsrd  r11
+#endif /* CONFIG_PPC_BOOK3E */
         isync
 
 	/* Enter PROM here... */
diff --git a/arch/powerpc/kernel/exceptions-64e.S b/arch/powerpc/kernel/exceptions-64e.S
new file mode 100644
index 00000000000..695d4847d22
--- /dev/null
+++ b/arch/powerpc/kernel/exceptions-64e.S
@@ -0,0 +1,784 @@
+/*
+ *  Boot code and exception vectors for Book3E processors
+ *
+ *  Copyright (C) 2007 Ben. Herrenschmidt (benh@kernel.crashing.org), IBM Corp.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/threads.h>
+#include <asm/reg.h>
+#include <asm/page.h>
+#include <asm/ppc_asm.h>
+#include <asm/asm-offsets.h>
+#include <asm/cputable.h>
+#include <asm/setup.h>
+#include <asm/thread_info.h>
+#include <asm/reg.h>
+#include <asm/exception-64e.h>
+#include <asm/bug.h>
+#include <asm/irqflags.h>
+#include <asm/ptrace.h>
+#include <asm/ppc-opcode.h>
+#include <asm/mmu.h>
+
+/* XXX This will ultimately add space for a special exception save
+ *     structure used to save things like SRR0/SRR1, SPRGs, MAS, etc...
+ *     when taking special interrupts. For now we don't support that,
+ *     special interrupts from within a non-standard level will probably
+ *     blow you up
+ */
+#define	SPECIAL_EXC_FRAME_SIZE	INT_FRAME_SIZE
+
+/* Exception prolog code for all exceptions */
+#define EXCEPTION_PROLOG(n, type, addition)				    \
+	mtspr	SPRN_SPRG_##type##_SCRATCH,r13;	/* get spare registers */   \
+	mfspr	r13,SPRN_SPRG_PACA;	/* get PACA */			    \
+	std	r10,PACA_EX##type+EX_R10(r13);				    \
+	std	r11,PACA_EX##type+EX_R11(r13);				    \
+	mfcr	r10;			/* save CR */			    \
+	addition;			/* additional code for that exc. */ \
+	std	r1,PACA_EX##type+EX_R1(r13); /* save old r1 in the PACA */  \
+	stw	r10,PACA_EX##type+EX_CR(r13); /* save old CR in the PACA */ \
+	mfspr	r11,SPRN_##type##_SRR1;/* what are we coming from */	    \
+	type##_SET_KSTACK;		/* get special stack if necessary */\
+	andi.	r10,r11,MSR_PR;		/* save stack pointer */	    \
+	beq	1f;			/* branch around if supervisor */   \
+	ld	r1,PACAKSAVE(r13);	/* get kernel stack coming from usr */\
+1:	cmpdi	cr1,r1,0;		/* check if SP makes sense */	    \
+	bge-	cr1,exc_##n##_bad_stack;/* bad stack (TODO: out of line) */ \
+	mfspr	r10,SPRN_##type##_SRR0;	/* read SRR0 before touching stack */
+
+/* Exception type-specific macros */
+#define	GEN_SET_KSTACK							    \
+	subi	r1,r1,INT_FRAME_SIZE;	/* alloc frame on kernel stack */
+#define SPRN_GEN_SRR0	SPRN_SRR0
+#define SPRN_GEN_SRR1	SPRN_SRR1
+
+#define CRIT_SET_KSTACK						            \
+	ld	r1,PACA_CRIT_STACK(r13);				    \
+	subi	r1,r1,SPECIAL_EXC_FRAME_SIZE;
+#define SPRN_CRIT_SRR0	SPRN_CSRR0
+#define SPRN_CRIT_SRR1	SPRN_CSRR1
+
+#define DBG_SET_KSTACK						            \
+	ld	r1,PACA_DBG_STACK(r13);					    \
+	subi	r1,r1,SPECIAL_EXC_FRAME_SIZE;
+#define SPRN_DBG_SRR0	SPRN_DSRR0
+#define SPRN_DBG_SRR1	SPRN_DSRR1
+
+#define MC_SET_KSTACK						            \
+	ld	r1,PACA_MC_STACK(r13);					    \
+	subi	r1,r1,SPECIAL_EXC_FRAME_SIZE;
+#define SPRN_MC_SRR0	SPRN_MCSRR0
+#define SPRN_MC_SRR1	SPRN_MCSRR1
+
+#define NORMAL_EXCEPTION_PROLOG(n, addition)				    \
+	EXCEPTION_PROLOG(n, GEN, addition##_GEN)
+
+#define CRIT_EXCEPTION_PROLOG(n, addition)				    \
+	EXCEPTION_PROLOG(n, CRIT, addition##_CRIT)
+
+#define DBG_EXCEPTION_PROLOG(n, addition)				    \
+	EXCEPTION_PROLOG(n, DBG, addition##_DBG)
+
+#define MC_EXCEPTION_PROLOG(n, addition)				    \
+	EXCEPTION_PROLOG(n, MC, addition##_MC)
+
+
+/* Variants of the "addition" argument for the prolog
+ */
+#define PROLOG_ADDITION_NONE_GEN
+#define PROLOG_ADDITION_NONE_CRIT
+#define PROLOG_ADDITION_NONE_DBG
+#define PROLOG_ADDITION_NONE_MC
+
+#define PROLOG_ADDITION_MASKABLE_GEN					    \
+	lbz	r11,PACASOFTIRQEN(r13); /* are irqs soft-disabled ? */	    \
+	cmpwi	cr0,r11,0;		/* yes -> go out of line */	    \
+	beq	masked_interrupt_book3e;
+
+#define PROLOG_ADDITION_2REGS_GEN					    \
+	std	r14,PACA_EXGEN+EX_R14(r13);				    \
+	std	r15,PACA_EXGEN+EX_R15(r13)
+
+#define PROLOG_ADDITION_1REG_GEN					    \
+	std	r14,PACA_EXGEN+EX_R14(r13);
+
+#define PROLOG_ADDITION_2REGS_CRIT					    \
+	std	r14,PACA_EXCRIT+EX_R14(r13);				    \
+	std	r15,PACA_EXCRIT+EX_R15(r13)
+
+#define PROLOG_ADDITION_2REGS_DBG					    \
+	std	r14,PACA_EXDBG+EX_R14(r13);				    \
+	std	r15,PACA_EXDBG+EX_R15(r13)
+
+#define PROLOG_ADDITION_2REGS_MC					    \
+	std	r14,PACA_EXMC+EX_R14(r13);				    \
+	std	r15,PACA_EXMC+EX_R15(r13)
+
+/* Core exception code for all exceptions except TLB misses.
+ * XXX: Needs to make SPRN_SPRG_GEN depend on exception type
+ */
+#define EXCEPTION_COMMON(n, excf, ints)					    \
+	std	r0,GPR0(r1);		/* save r0 in stackframe */	    \
+	std	r2,GPR2(r1);		/* save r2 in stackframe */	    \
+	SAVE_4GPRS(3, r1);		/* save r3 - r6 in stackframe */    \
+	SAVE_2GPRS(7, r1);		/* save r7, r8 in stackframe */	    \
+	std	r9,GPR9(r1);		/* save r9 in stackframe */	    \
+	std	r10,_NIP(r1);		/* save SRR0 to stackframe */	    \
+	std	r11,_MSR(r1);		/* save SRR1 to stackframe */	    \
+	ACCOUNT_CPU_USER_ENTRY(r10,r11);/* accounting (uses cr0+eq) */	    \
+	ld	r3,excf+EX_R10(r13);	/* get back r10 */		    \
+	ld	r4,excf+EX_R11(r13);	/* get back r11 */		    \
+	mfspr	r5,SPRN_SPRG_GEN_SCRATCH;/* get back r13 */		    \
+	std	r12,GPR12(r1);		/* save r12 in stackframe */	    \
+	ld	r2,PACATOC(r13);	/* get kernel TOC into r2 */	    \
+	mflr	r6;			/* save LR in stackframe */	    \
+	mfctr	r7;			/* save CTR in stackframe */	    \
+	mfspr	r8,SPRN_XER;		/* save XER in stackframe */	    \
+	ld	r9,excf+EX_R1(r13);	/* load orig r1 back from PACA */   \
+	lwz	r10,excf+EX_CR(r13);	/* load orig CR back from PACA	*/  \
+	lbz	r11,PACASOFTIRQEN(r13);	/* get current IRQ softe */	    \
+	ld	r12,exception_marker@toc(r2);				    \
+	li	r0,0;							    \
+	std	r3,GPR10(r1);		/* save r10 to stackframe */	    \
+	std	r4,GPR11(r1);		/* save r11 to stackframe */	    \
+	std	r5,GPR13(r1);		/* save it to stackframe */	    \
+	std	r6,_LINK(r1);						    \
+	std	r7,_CTR(r1);						    \
+	std	r8,_XER(r1);						    \
+	li	r3,(n)+1;		/* indicate partial regs in trap */ \
+	std	r9,0(r1);		/* store stack frame back link */   \
+	std	r10,_CCR(r1);		/* store orig CR in stackframe */   \
+	std	r9,GPR1(r1);		/* store stack frame back link */   \
+	std	r11,SOFTE(r1);		/* and save it to stackframe */     \
+	std	r12,STACK_FRAME_OVERHEAD-16(r1); /* mark the frame */	    \
+	std	r3,_TRAP(r1);		/* set trap number		*/  \
+	std	r0,RESULT(r1);		/* clear regs->result */	    \
+	ints;
+
+/* Variants for the "ints" argument */
+#define INTS_KEEP
+#define INTS_DISABLE_SOFT						    \
+	stb	r0,PACASOFTIRQEN(r13);	/* mark interrupts soft-disabled */ \
+	TRACE_DISABLE_INTS;
+#define INTS_DISABLE_HARD						    \
+	stb	r0,PACAHARDIRQEN(r13); /* and hard disabled */
+#define INTS_DISABLE_ALL						    \
+	INTS_DISABLE_SOFT						    \
+	INTS_DISABLE_HARD
+
+/* This is called by exceptions that used INTS_KEEP (that is did not clear
+ * neither soft nor hard IRQ indicators in the PACA. This will restore MSR:EE
+ * to it's previous value
+ *
+ * XXX In the long run, we may want to open-code it in order to separate the
+ *     load from the wrtee, thus limiting the latency caused by the dependency
+ *     but at this point, I'll favor code clarity until we have a near to final
+ *     implementation
+ */
+#define INTS_RESTORE_HARD						    \
+	ld	r11,_MSR(r1);						    \
+	wrtee	r11;
+
+/* XXX FIXME: Restore r14/r15 when necessary */
+#define BAD_STACK_TRAMPOLINE(n)						    \
+exc_##n##_bad_stack:							    \
+	li	r1,(n);			/* get exception number */	    \
+	sth	r1,PACA_TRAP_SAVE(r13);	/* store trap */		    \
+	b	bad_stack_book3e;	/* bad stack error */
+
+#define	EXCEPTION_STUB(loc, label)					\
+	. = interrupt_base_book3e + loc;				\
+	nop;	/* To make debug interrupts happy */			\
+	b	exc_##label##_book3e;
+
+#define ACK_NONE(r)
+#define ACK_DEC(r)							\
+	lis	r,TSR_DIS@h;						\
+	mtspr	SPRN_TSR,r
+#define ACK_FIT(r)							\
+	lis	r,TSR_FIS@h;						\
+	mtspr	SPRN_TSR,r
+
+#define MASKABLE_EXCEPTION(trapnum, label, hdlr, ack)			\
+	START_EXCEPTION(label);						\
+	NORMAL_EXCEPTION_PROLOG(trapnum, PROLOG_ADDITION_MASKABLE)	\
+	EXCEPTION_COMMON(trapnum, PACA_EXGEN, INTS_DISABLE_ALL)		\
+	ack(r8);							\
+	addi	r3,r1,STACK_FRAME_OVERHEAD;				\
+	bl	hdlr;							\
+	b	.ret_from_except_lite;
+
+/* This value is used to mark exception frames on the stack. */
+	.section	".toc","aw"
+exception_marker:
+	.tc	ID_EXC_MARKER[TC],STACK_FRAME_REGS_MARKER
+
+
+/*
+ * And here we have the exception vectors !
+ */
+
+	.text
+	.balign	0x1000
+	.globl interrupt_base_book3e
+interrupt_base_book3e:					/* fake trap */
+	/* Note: If real debug exceptions are supported by the HW, the vector
+	 * below will have to be patched up to point to an appropriate handler
+	 */
+	EXCEPTION_STUB(0x000, machine_check)		/* 0x0200 */
+	EXCEPTION_STUB(0x020, critical_input)		/* 0x0580 */
+	EXCEPTION_STUB(0x040, debug_crit)		/* 0x0d00 */
+	EXCEPTION_STUB(0x060, data_storage)		/* 0x0300 */
+	EXCEPTION_STUB(0x080, instruction_storage)	/* 0x0400 */
+	EXCEPTION_STUB(0x0a0, external_input)		/* 0x0500 */
+	EXCEPTION_STUB(0x0c0, alignment)		/* 0x0600 */
+	EXCEPTION_STUB(0x0e0, program)			/* 0x0700 */
+	EXCEPTION_STUB(0x100, fp_unavailable)		/* 0x0800 */
+	EXCEPTION_STUB(0x120, system_call)		/* 0x0c00 */
+	EXCEPTION_STUB(0x140, ap_unavailable)		/* 0x0f20 */
+	EXCEPTION_STUB(0x160, decrementer)		/* 0x0900 */
+	EXCEPTION_STUB(0x180, fixed_interval)		/* 0x0980 */
+	EXCEPTION_STUB(0x1a0, watchdog)			/* 0x09f0 */
+	EXCEPTION_STUB(0x1c0, data_tlb_miss)
+	EXCEPTION_STUB(0x1e0, instruction_tlb_miss)
+
+#if 0
+	EXCEPTION_STUB(0x280, processor_doorbell)
+	EXCEPTION_STUB(0x220, processor_doorbell_crit)
+#endif
+	.globl interrupt_end_book3e
+interrupt_end_book3e:
+
+/* Critical Input Interrupt */
+	START_EXCEPTION(critical_input);
+	CRIT_EXCEPTION_PROLOG(0x100, PROLOG_ADDITION_NONE)
+//	EXCEPTION_COMMON(0x100, PACA_EXCRIT, INTS_DISABLE_ALL)
+//	bl	special_reg_save_crit
+//	addi	r3,r1,STACK_FRAME_OVERHEAD
+//	bl	.critical_exception
+//	b	ret_from_crit_except
+	b	.
+
+/* Machine Check Interrupt */
+	START_EXCEPTION(machine_check);
+	CRIT_EXCEPTION_PROLOG(0x200, PROLOG_ADDITION_NONE)
+//	EXCEPTION_COMMON(0x200, PACA_EXMC, INTS_DISABLE_ALL)
+//	bl	special_reg_save_mc
+//	addi	r3,r1,STACK_FRAME_OVERHEAD
+//	bl	.machine_check_exception
+//	b	ret_from_mc_except
+	b	.
+
+/* Data Storage Interrupt */
+	START_EXCEPTION(data_storage)
+	NORMAL_EXCEPTION_PROLOG(0x300, PROLOG_ADDITION_2REGS)
+	mfspr	r14,SPRN_DEAR
+	mfspr	r15,SPRN_ESR
+	EXCEPTION_COMMON(0x300, PACA_EXGEN, INTS_KEEP)
+	b	storage_fault_common
+
+/* Instruction Storage Interrupt */
+	START_EXCEPTION(instruction_storage);
+	NORMAL_EXCEPTION_PROLOG(0x400, PROLOG_ADDITION_2REGS)
+	li	r15,0
+	mr	r14,r10
+	EXCEPTION_COMMON(0x400, PACA_EXGEN, INTS_KEEP)
+	b	storage_fault_common
+
+/* External Input Interrupt */
+	MASKABLE_EXCEPTION(0x500, external_input, .do_IRQ, ACK_NONE)
+
+/* Alignment */
+	START_EXCEPTION(alignment);
+	NORMAL_EXCEPTION_PROLOG(0x600, PROLOG_ADDITION_2REGS)
+	mfspr	r14,SPRN_DEAR
+	mfspr	r15,SPRN_ESR
+	EXCEPTION_COMMON(0x600, PACA_EXGEN, INTS_KEEP)
+	b	alignment_more	/* no room, go out of line */
+
+/* Program Interrupt */
+	START_EXCEPTION(program);
+	NORMAL_EXCEPTION_PROLOG(0x700, PROLOG_ADDITION_1REG)
+	mfspr	r14,SPRN_ESR
+	EXCEPTION_COMMON(0x700, PACA_EXGEN, INTS_DISABLE_SOFT)
+	std	r14,_DSISR(r1)
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	ld	r14,PACA_EXGEN+EX_R14(r13)
+	bl	.save_nvgprs
+	INTS_RESTORE_HARD
+	bl	.program_check_exception
+	b	.ret_from_except
+
+/* Floating Point Unavailable Interrupt */
+	START_EXCEPTION(fp_unavailable);
+	NORMAL_EXCEPTION_PROLOG(0x800, PROLOG_ADDITION_NONE)
+	/* we can probably do a shorter exception entry for that one... */
+	EXCEPTION_COMMON(0x800, PACA_EXGEN, INTS_KEEP)
+	bne	1f			/* if from user, just load it up */
+	bl	.save_nvgprs
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	INTS_RESTORE_HARD
+	bl	.kernel_fp_unavailable_exception
+	BUG_OPCODE
+1:	ld	r12,_MSR(r1)
+	bl	.load_up_fpu
+	b	fast_exception_return
+
+/* Decrementer Interrupt */
+	MASKABLE_EXCEPTION(0x900, decrementer, .timer_interrupt, ACK_DEC)
+
+/* Fixed Interval Timer Interrupt */
+	MASKABLE_EXCEPTION(0x980, fixed_interval, .unknown_exception, ACK_FIT)
+
+/* Watchdog Timer Interrupt */
+	START_EXCEPTION(watchdog);
+	CRIT_EXCEPTION_PROLOG(0x9f0, PROLOG_ADDITION_NONE)
+//	EXCEPTION_COMMON(0x9f0, PACA_EXCRIT, INTS_DISABLE_ALL)
+//	bl	special_reg_save_crit
+//	addi	r3,r1,STACK_FRAME_OVERHEAD
+//	bl	.unknown_exception
+//	b	ret_from_crit_except
+	b	.
+
+/* System Call Interrupt */
+	START_EXCEPTION(system_call)
+	mr	r9,r13			/* keep a copy of userland r13 */
+	mfspr	r11,SPRN_SRR0		/* get return address */
+	mfspr	r12,SPRN_SRR1		/* get previous MSR */
+	mfspr	r13,SPRN_SPRG_PACA	/* get our PACA */
+	b	system_call_common
+
+/* Auxillary Processor Unavailable Interrupt */
+	START_EXCEPTION(ap_unavailable);
+	NORMAL_EXCEPTION_PROLOG(0xf20, PROLOG_ADDITION_NONE)
+	EXCEPTION_COMMON(0xf20, PACA_EXGEN, INTS_KEEP)
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	bl	.save_nvgprs
+	INTS_RESTORE_HARD
+	bl	.unknown_exception
+	b	.ret_from_except
+
+/* Debug exception as a critical interrupt*/
+	START_EXCEPTION(debug_crit);
+	CRIT_EXCEPTION_PROLOG(0xd00, PROLOG_ADDITION_2REGS)
+
+	/*
+	 * If there is a single step or branch-taken exception in an
+	 * exception entry sequence, it was probably meant to apply to
+	 * the code where the exception occurred (since exception entry
+	 * doesn't turn off DE automatically).  We simulate the effect
+	 * of turning off DE on entry to an exception handler by turning
+	 * off DE in the CSRR1 value and clearing the debug status.
+	 */
+
+	mfspr	r14,SPRN_DBSR		/* check single-step/branch taken */
+	andis.	r15,r14,DBSR_IC@h
+	beq+	1f
+
+	LOAD_REG_IMMEDIATE(r14,interrupt_base_book3e)
+	LOAD_REG_IMMEDIATE(r15,interrupt_end_book3e)
+	cmpld	cr0,r10,r14
+	cmpld	cr1,r10,r15
+	blt+	cr0,1f
+	bge+	cr1,1f
+
+	/* here it looks like we got an inappropriate debug exception. */
+	lis	r14,DBSR_IC@h		/* clear the IC event */
+	rlwinm	r11,r11,0,~MSR_DE	/* clear DE in the CSRR1 value */
+	mtspr	SPRN_DBSR,r14
+	mtspr	SPRN_CSRR1,r11
+	lwz	r10,PACA_EXCRIT+EX_CR(r13)	/* restore registers */
+	ld	r1,PACA_EXCRIT+EX_R1(r13)
+	ld	r14,PACA_EXCRIT+EX_R14(r13)
+	ld	r15,PACA_EXCRIT+EX_R15(r13)
+	mtcr	r10
+	ld	r10,PACA_EXCRIT+EX_R10(r13)	/* restore registers */
+	ld	r11,PACA_EXCRIT+EX_R11(r13)
+	mfspr	r13,SPRN_SPRG_CRIT_SCRATCH
+	rfci
+
+	/* Normal debug exception */
+	/* XXX We only handle coming from userspace for now since we can't
+	 *     quite save properly an interrupted kernel state yet
+	 */
+1:	andi.	r14,r11,MSR_PR;		/* check for userspace again */
+	beq	kernel_dbg_exc;		/* if from kernel mode */
+
+	/* Now we mash up things to make it look like we are coming on a
+	 * normal exception
+	 */
+	mfspr	r15,SPRN_SPRG_CRIT_SCRATCH
+	mtspr	SPRN_SPRG_GEN_SCRATCH,r15
+	mfspr	r14,SPRN_DBSR
+	EXCEPTION_COMMON(0xd00, PACA_EXCRIT, INTS_DISABLE_ALL)
+	std	r14,_DSISR(r1)
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	mr	r4,r14
+	ld	r14,PACA_EXCRIT+EX_R14(r13)
+	ld	r15,PACA_EXCRIT+EX_R15(r13)
+	bl	.save_nvgprs
+	bl	.DebugException
+	b	.ret_from_except
+
+kernel_dbg_exc:
+	b	.	/* NYI */
+
+
+/*
+ * An interrupt came in while soft-disabled; clear EE in SRR1,
+ * clear paca->hard_enabled and return.
+ */
+masked_interrupt_book3e:
+	mtcr	r10
+	stb	r11,PACAHARDIRQEN(r13)
+	mfspr	r10,SPRN_SRR1
+	rldicl	r11,r10,48,1		/* clear MSR_EE */
+	rotldi	r10,r11,16
+	mtspr	SPRN_SRR1,r10
+	ld	r10,PACA_EXGEN+EX_R10(r13);	/* restore registers */
+	ld	r11,PACA_EXGEN+EX_R11(r13);
+	mfspr	r13,SPRN_SPRG_GEN_SCRATCH;
+	rfi
+	b	.
+
+/*
+ * This is called from 0x300 and 0x400 handlers after the prologs with
+ * r14 and r15 containing the fault address and error code, with the
+ * original values stashed away in the PACA
+ */
+storage_fault_common:
+	std	r14,_DAR(r1)
+	std	r15,_DSISR(r1)
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	mr	r4,r14
+	mr	r5,r15
+	ld	r14,PACA_EXGEN+EX_R14(r13)
+	ld	r15,PACA_EXGEN+EX_R15(r13)
+	INTS_RESTORE_HARD
+	bl	.do_page_fault
+	cmpdi	r3,0
+	bne-	1f
+	b	.ret_from_except_lite
+1:	bl	.save_nvgprs
+	mr	r5,r3
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	ld	r4,_DAR(r1)
+	bl	.bad_page_fault
+	b	.ret_from_except
+
+/*
+ * Alignment exception doesn't fit entirely in the 0x100 bytes so it
+ * continues here.
+ */
+alignment_more:
+	std	r14,_DAR(r1)
+	std	r15,_DSISR(r1)
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	ld	r14,PACA_EXGEN+EX_R14(r13)
+	ld	r15,PACA_EXGEN+EX_R15(r13)
+	bl	.save_nvgprs
+	INTS_RESTORE_HARD
+	bl	.alignment_exception
+	b	.ret_from_except
+
+/*
+ * We branch here from entry_64.S for the last stage of the exception
+ * return code path. MSR:EE is expected to be off at that point
+ */
+_GLOBAL(exception_return_book3e)
+	b	1f
+
+/* This is the return from load_up_fpu fast path which could do with
+ * less GPR restores in fact, but for now we have a single return path
+ */
+	.globl fast_exception_return
+fast_exception_return:
+	wrteei	0
+1:	mr	r0,r13
+	ld	r10,_MSR(r1)
+	REST_4GPRS(2, r1)
+	andi.	r6,r10,MSR_PR
+	REST_2GPRS(6, r1)
+	beq	1f
+	ACCOUNT_CPU_USER_EXIT(r10, r11)
+	ld	r0,GPR13(r1)
+
+1:	stdcx.	r0,0,r1		/* to clear the reservation */
+
+	ld	r8,_CCR(r1)
+	ld	r9,_LINK(r1)
+	ld	r10,_CTR(r1)
+	ld	r11,_XER(r1)
+	mtcr	r8
+	mtlr	r9
+	mtctr	r10
+	mtxer	r11
+	REST_2GPRS(8, r1)
+	ld	r10,GPR10(r1)
+	ld	r11,GPR11(r1)
+	ld	r12,GPR12(r1)
+	mtspr	SPRN_SPRG_GEN_SCRATCH,r0
+
+	std	r10,PACA_EXGEN+EX_R10(r13);
+	std	r11,PACA_EXGEN+EX_R11(r13);
+	ld	r10,_NIP(r1)
+	ld	r11,_MSR(r1)
+	ld	r0,GPR0(r1)
+	ld	r1,GPR1(r1)
+	mtspr	SPRN_SRR0,r10
+	mtspr	SPRN_SRR1,r11
+	ld	r10,PACA_EXGEN+EX_R10(r13)
+	ld	r11,PACA_EXGEN+EX_R11(r13)
+	mfspr	r13,SPRN_SPRG_GEN_SCRATCH
+	rfi
+
+/*
+ * Trampolines used when spotting a bad kernel stack pointer in
+ * the exception entry code.
+ *
+ * TODO: move some bits like SRR0 read to trampoline, pass PACA
+ * index around, etc... to handle crit & mcheck
+ */
+BAD_STACK_TRAMPOLINE(0x000)
+BAD_STACK_TRAMPOLINE(0x100)
+BAD_STACK_TRAMPOLINE(0x200)
+BAD_STACK_TRAMPOLINE(0x300)
+BAD_STACK_TRAMPOLINE(0x400)
+BAD_STACK_TRAMPOLINE(0x500)
+BAD_STACK_TRAMPOLINE(0x600)
+BAD_STACK_TRAMPOLINE(0x700)
+BAD_STACK_TRAMPOLINE(0x800)
+BAD_STACK_TRAMPOLINE(0x900)
+BAD_STACK_TRAMPOLINE(0x980)
+BAD_STACK_TRAMPOLINE(0x9f0)
+BAD_STACK_TRAMPOLINE(0xa00)
+BAD_STACK_TRAMPOLINE(0xb00)
+BAD_STACK_TRAMPOLINE(0xc00)
+BAD_STACK_TRAMPOLINE(0xd00)
+BAD_STACK_TRAMPOLINE(0xe00)
+BAD_STACK_TRAMPOLINE(0xf00)
+BAD_STACK_TRAMPOLINE(0xf20)
+
+	.globl	bad_stack_book3e
+bad_stack_book3e:
+	/* XXX: Needs to make SPRN_SPRG_GEN depend on exception type */
+	mfspr	r10,SPRN_SRR0;		  /* read SRR0 before touching stack */
+	ld	r1,PACAEMERGSP(r13)
+	subi	r1,r1,64+INT_FRAME_SIZE
+	std	r10,_NIP(r1)
+	std	r11,_MSR(r1)
+	ld	r10,PACA_EXGEN+EX_R1(r13) /* FIXME for crit & mcheck */
+	lwz	r11,PACA_EXGEN+EX_CR(r13) /* FIXME for crit & mcheck */
+	std	r10,GPR1(r1)
+	std	r11,_CCR(r1)
+	mfspr	r10,SPRN_DEAR
+	mfspr	r11,SPRN_ESR
+	std	r10,_DAR(r1)
+	std	r11,_DSISR(r1)
+	std	r0,GPR0(r1);		/* save r0 in stackframe */	    \
+	std	r2,GPR2(r1);		/* save r2 in stackframe */	    \
+	SAVE_4GPRS(3, r1);		/* save r3 - r6 in stackframe */    \
+	SAVE_2GPRS(7, r1);		/* save r7, r8 in stackframe */	    \
+	std	r9,GPR9(r1);		/* save r9 in stackframe */	    \
+	ld	r3,PACA_EXGEN+EX_R10(r13);/* get back r10 */		    \
+	ld	r4,PACA_EXGEN+EX_R11(r13);/* get back r11 */		    \
+	mfspr	r5,SPRN_SPRG_GEN_SCRATCH;/* get back r13 XXX can be wrong */ \
+	std	r3,GPR10(r1);		/* save r10 to stackframe */	    \
+	std	r4,GPR11(r1);		/* save r11 to stackframe */	    \
+	std	r12,GPR12(r1);		/* save r12 in stackframe */	    \
+	std	r5,GPR13(r1);		/* save it to stackframe */	    \
+	mflr	r10
+	mfctr	r11
+	mfxer	r12
+	std	r10,_LINK(r1)
+	std	r11,_CTR(r1)
+	std	r12,_XER(r1)
+	SAVE_10GPRS(14,r1)
+	SAVE_8GPRS(24,r1)
+	lhz	r12,PACA_TRAP_SAVE(r13)
+	std	r12,_TRAP(r1)
+	addi	r11,r1,INT_FRAME_SIZE
+	std	r11,0(r1)
+	li	r12,0
+	std	r12,0(r11)
+	ld	r2,PACATOC(r13)
+1:	addi	r3,r1,STACK_FRAME_OVERHEAD
+	bl	.kernel_bad_stack
+	b	1b
+
+/*
+ * Setup the initial TLB for a core. This current implementation
+ * assume that whatever we are running off will not conflict with
+ * the new mapping at PAGE_OFFSET.
+ * We also make various assumptions about the processor we run on,
+ * this might have to be made more flexible based on the content
+ * of MMUCFG and friends.
+ */
+_GLOBAL(initial_tlb_book3e)
+
+	/* Setup MAS 0,1,2,3 and 7 for tlbwe of a 1G entry that maps the
+	 * kernel linear mapping. We also set MAS8 once for all here though
+	 * that will have to be made dependent on whether we are running under
+	 * a hypervisor I suppose.
+	 */
+	li	r3,MAS0_HES | MAS0_WQ_ALLWAYS
+	mtspr	SPRN_MAS0,r3
+	lis	r3,(MAS1_VALID | MAS1_IPROT)@h
+	ori	r3,r3,BOOK3E_PAGESZ_1GB << MAS1_TSIZE_SHIFT
+	mtspr	SPRN_MAS1,r3
+	LOAD_REG_IMMEDIATE(r3, PAGE_OFFSET | MAS2_M)
+	mtspr	SPRN_MAS2,r3
+	li	r3,MAS3_SR | MAS3_SW | MAS3_SX
+	mtspr	SPRN_MAS7_MAS3,r3
+	li	r3,0
+	mtspr	SPRN_MAS8,r3
+
+	/* Write the TLB entry */
+	tlbwe
+
+	/* Now we branch the new virtual address mapped by this entry */
+	LOAD_REG_IMMEDIATE(r3,1f)
+	mtctr	r3
+	bctr
+
+1:	/* We are now running at PAGE_OFFSET, clean the TLB of everything
+	 * else (XXX we should scan for bolted crap from the firmware too)
+	 */
+	PPC_TLBILX(0,0,0)
+	sync
+	isync
+
+	/* We translate LR and return */
+	mflr	r3
+	tovirt(r3,r3)
+	mtlr	r3
+	blr
+
+/*
+ * Main entry (boot CPU, thread 0)
+ *
+ * We enter here from head_64.S, possibly after the prom_init trampoline
+ * with r3 and r4 already saved to r31 and 30 respectively and in 64 bits
+ * mode. Anything else is as it was left by the bootloader
+ *
+ * Initial requirements of this port:
+ *
+ * - Kernel loaded at 0 physical
+ * - A good lump of memory mapped 0:0 by UTLB entry 0
+ * - MSR:IS & MSR:DS set to 0
+ *
+ * Note that some of the above requirements will be relaxed in the future
+ * as the kernel becomes smarter at dealing with different initial conditions
+ * but for now you have to be careful
+ */
+_GLOBAL(start_initialization_book3e)
+	mflr	r28
+
+	/* First, we need to setup some initial TLBs to map the kernel
+	 * text, data and bss at PAGE_OFFSET. We don't have a real mode
+	 * and always use AS 0, so we just set it up to match our link
+	 * address and never use 0 based addresses.
+	 */
+	bl	.initial_tlb_book3e
+
+	/* Init global core bits */
+	bl	.init_core_book3e
+
+	/* Init per-thread bits */
+	bl	.init_thread_book3e
+
+	/* Return to common init code */
+	tovirt(r28,r28)
+	mtlr	r28
+	blr
+
+
+/*
+ * Secondary core/processor entry
+ *
+ * This is entered for thread 0 of a secondary core, all other threads
+ * are expected to be stopped. It's similar to start_initialization_book3e
+ * except that it's generally entered from the holding loop in head_64.S
+ * after CPUs have been gathered by Open Firmware.
+ *
+ * We assume we are in 32 bits mode running with whatever TLB entry was
+ * set for us by the firmware or POR engine.
+ */
+_GLOBAL(book3e_secondary_core_init_tlb_set)
+	li	r4,1
+	b	.generic_secondary_smp_init
+
+_GLOBAL(book3e_secondary_core_init)
+	mflr	r28
+
+	/* Do we need to setup initial TLB entry ? */
+	cmplwi	r4,0
+	bne	2f
+
+	/* Setup TLB for this core */
+	bl	.initial_tlb_book3e
+
+	/* We can return from the above running at a different
+	 * address, so recalculate r2 (TOC)
+	 */
+	bl	.relative_toc
+
+	/* Init global core bits */
+2:	bl	.init_core_book3e
+
+	/* Init per-thread bits */
+3:	bl	.init_thread_book3e
+
+	/* Return to common init code at proper virtual address.
+	 *
+	 * Due to various previous assumptions, we know we entered this
+	 * function at either the final PAGE_OFFSET mapping or using a
+	 * 1:1 mapping at 0, so we don't bother doing a complicated check
+	 * here, we just ensure the return address has the right top bits.
+	 *
+	 * Note that if we ever want to be smarter about where we can be
+	 * started from, we have to be careful that by the time we reach
+	 * the code below we may already be running at a different location
+	 * than the one we were called from since initial_tlb_book3e can
+	 * have moved us already.
+	 */
+	cmpdi	cr0,r28,0
+	blt	1f
+	lis	r3,PAGE_OFFSET@highest
+	sldi	r3,r3,32
+	or	r28,r28,r3
+1:	mtlr	r28
+	blr
+
+_GLOBAL(book3e_secondary_thread_init)
+	mflr	r28
+	b	3b
+
+_STATIC(init_core_book3e)
+	/* Establish the interrupt vector base */
+	LOAD_REG_IMMEDIATE(r3, interrupt_base_book3e)
+	mtspr	SPRN_IVPR,r3
+	sync
+	blr
+
+_STATIC(init_thread_book3e)
+	lis	r3,(SPRN_EPCR_ICM | SPRN_EPCR_GICM)@h
+	mtspr	SPRN_EPCR,r3
+
+	/* Make sure interrupts are off */
+	wrteei	0
+
+	/* disable watchdog and FIT and enable DEC interrupts */
+	lis	r3,TCR_DIE@h
+	mtspr	SPRN_TCR,r3
+
+	blr
+
+
+
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index 0552f01041a..c38afdb45d7 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -121,10 +121,11 @@ __run_at_load:
  */
 	.globl	__secondary_hold
 __secondary_hold:
+#ifndef CONFIG_PPC_BOOK3E
 	mfmsr	r24
 	ori	r24,r24,MSR_RI
 	mtmsrd	r24			/* RI on */
-
+#endif
 	/* Grab our physical cpu number */
 	mr	r24,r3
 
@@ -143,6 +144,7 @@ __secondary_hold:
 	ld	r4,0(r4)		/* deref function descriptor */
 	mtctr	r4
 	mr	r3,r24
+	li	r4,0
 	bctr
 #else
 	BUG_OPCODE
@@ -163,21 +165,49 @@ exception_marker:
 #include "exceptions-64s.S"
 #endif
 
+_GLOBAL(generic_secondary_thread_init)
+	mr	r24,r3
+
+	/* turn on 64-bit mode */
+	bl	.enable_64b_mode
+
+	/* get a valid TOC pointer, wherever we're mapped at */
+	bl	.relative_toc
+
+#ifdef CONFIG_PPC_BOOK3E
+	/* Book3E initialization */
+	mr	r3,r24
+	bl	.book3e_secondary_thread_init
+#endif
+	b	generic_secondary_common_init
 
 /*
  * On pSeries and most other platforms, secondary processors spin
  * in the following code.
  * At entry, r3 = this processor's number (physical cpu id)
+ *
+ * On Book3E, r4 = 1 to indicate that the initial TLB entry for
+ * this core already exists (setup via some other mechanism such
+ * as SCOM before entry).
  */
 _GLOBAL(generic_secondary_smp_init)
 	mr	r24,r3
-	
+	mr	r25,r4
+
 	/* turn on 64-bit mode */
 	bl	.enable_64b_mode
 
-	/* get the TOC pointer (real address) */
+	/* get a valid TOC pointer, wherever we're mapped at */
 	bl	.relative_toc
 
+#ifdef CONFIG_PPC_BOOK3E
+	/* Book3E initialization */
+	mr	r3,r24
+	mr	r4,r25
+	bl	.book3e_secondary_core_init
+#endif
+
+generic_secondary_common_init:
 	/* Set up a paca value for this processor. Since we have the
 	 * physical cpu id in r24, we need to search the pacas to find
 	 * which logical id maps to our physical one.
@@ -196,6 +226,11 @@ _GLOBAL(generic_secondary_smp_init)
 	b	.kexec_wait		/* next kernel might do better	 */
 
 2:	mtspr	SPRN_SPRG_PACA,r13	/* Save vaddr of paca in an SPRG */
+#ifdef CONFIG_PPC_BOOK3E
+	addi	r12,r13,PACA_EXTLB	/* and TLB exc frame in another  */
+	mtspr	SPRN_SPRG_TLB_EXFRAME,r12
+#endif
+
 	/* From now on, r24 is expected to be logical cpuid */
 	mr	r24,r5
 3:	HMT_LOW
@@ -231,6 +266,7 @@ _GLOBAL(generic_secondary_smp_init)
  * Turn the MMU off.
  * Assumes we're mapped EA == RA if the MMU is on.
  */
+#ifdef CONFIG_PPC_BOOK3S
 _STATIC(__mmu_off)
 	mfmsr	r3
 	andi.	r0,r3,MSR_IR|MSR_DR
@@ -242,6 +278,7 @@ _STATIC(__mmu_off)
 	sync
 	rfid
 	b	.	/* prevent speculative execution */
+#endif
 
 
 /*
@@ -279,6 +316,10 @@ _GLOBAL(__start_initialization_multiplatform)
 	mr	r31,r3
 	mr	r30,r4
 
+#ifdef CONFIG_PPC_BOOK3E
+	bl	.start_initialization_book3e
+	b	.__after_prom_start
+#else
 	/* Setup some critical 970 SPRs before switching MMU off */
 	mfspr	r0,SPRN_PVR
 	srwi	r0,r0,16
@@ -296,6 +337,7 @@ _GLOBAL(__start_initialization_multiplatform)
 	/* Switch off MMU if not already off */
 	bl	.__mmu_off
 	b	.__after_prom_start
+#endif /* CONFIG_PPC_BOOK3E */
 
 _INIT_STATIC(__boot_from_prom)
 #ifdef CONFIG_PPC_OF_BOOT_TRAMPOLINE
@@ -358,10 +400,16 @@ _STATIC(__after_prom_start)
  * Note: This process overwrites the OF exception vectors.
  */
 	li	r3,0			/* target addr */
+#ifdef CONFIG_PPC_BOOK3E
+	tovirt(r3,r3)			/* on booke, we already run at PAGE_OFFSET */
+#endif
 	mr.	r4,r26			/* In some cases the loader may  */
 	beq	9f			/* have already put us at zero */
 	li	r6,0x100		/* Start offset, the first 0x100 */
 					/* bytes were copied earlier.	 */
+#ifdef CONFIG_PPC_BOOK3E
+	tovirt(r6,r6)			/* on booke, we already run at PAGE_OFFSET */
+#endif
 
 #ifdef CONFIG_CRASH_DUMP
 /*
@@ -507,6 +555,9 @@ _GLOBAL(pmac_secondary_start)
  *   r13       = paca virtual address
  *   SPRG_PACA = paca virtual address
  */
+	.section ".text";
+	.align 2 ;
+
 	.globl	__secondary_start
 __secondary_start:
 	/* Set thread priority to MEDIUM */
@@ -543,7 +594,7 @@ END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES)
 
 	mtspr	SPRN_SRR0,r3
 	mtspr	SPRN_SRR1,r4
-	rfid
+	RFI
 	b	.	/* prevent speculative execution */
 
 /* 
@@ -564,11 +615,16 @@ _GLOBAL(start_secondary_prolog)
  */
 _GLOBAL(enable_64b_mode)
 	mfmsr	r11			/* grab the current MSR */
+#ifdef CONFIG_PPC_BOOK3E
+	oris	r11,r11,0x8000		/* CM bit set, we'll set ICM later */
+	mtmsr	r11
+#else /* CONFIG_PPC_BOOK3E */
 	li	r12,(MSR_SF | MSR_ISF)@highest
 	sldi	r12,r12,48
 	or	r11,r11,r12
 	mtmsrd	r11
 	isync
+#endif
 	blr
 
 /*
@@ -612,9 +668,11 @@ _INIT_STATIC(start_here_multiplatform)
 	bdnz	3b
 4:
 
+#ifndef CONFIG_PPC_BOOK3E
 	mfmsr	r6
 	ori	r6,r6,MSR_RI
 	mtmsrd	r6			/* RI on */
+#endif
 
 #ifdef CONFIG_RELOCATABLE
 	/* Save the physical address we're running at in kernstart_addr */
@@ -647,7 +705,7 @@ _INIT_STATIC(start_here_multiplatform)
 	ld	r4,PACAKMSR(r13)
 	mtspr	SPRN_SRR0,r3
 	mtspr	SPRN_SRR1,r4
-	rfid
+	RFI
 	b	.	/* prevent speculative execution */
 	
 	/* This is where all platforms converge execution */
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 65aced7b833..87df5172064 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -454,6 +454,24 @@ static void __init irqstack_early_init(void)
 #define irqstack_early_init()
 #endif
 
+#ifdef CONFIG_PPC_BOOK3E
+static void __init exc_lvl_early_init(void)
+{
+	unsigned int i;
+
+	for_each_possible_cpu(i) {
+		critirq_ctx[i] = (struct thread_info *)
+			__va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+		dbgirq_ctx[i] = (struct thread_info *)
+			__va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+		mcheckirq_ctx[i] = (struct thread_info *)
+			__va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+	}
+}
+#else
+#define exc_lvl_early_init()
+#endif
+
 /*
  * Stack space used when we detect a bad kernel stack pointer, and
  * early in SMP boots before relocation is enabled.
@@ -513,6 +531,7 @@ void __init setup_arch(char **cmdline_p)
 	init_mm.brk = klimit;
 	
 	irqstack_early_init();
+	exc_lvl_early_init();
 	emergency_stack_init();
 
 #ifdef CONFIG_PPC_STD_MMU_64
diff --git a/arch/powerpc/mm/Makefile b/arch/powerpc/mm/Makefile
index 3e68363405b..6fb8fc8d2fe 100644
--- a/arch/powerpc/mm/Makefile
+++ b/arch/powerpc/mm/Makefile
@@ -13,6 +13,7 @@ obj-y				:= fault.o mem.o pgtable.o gup.o \
 				   pgtable_$(CONFIG_WORD_SIZE).o
 obj-$(CONFIG_PPC_MMU_NOHASH)	+= mmu_context_nohash.o tlb_nohash.o \
 				   tlb_nohash_low.o
+obj-$(CONFIG_PPC_BOOK3E)	+= tlb_low_$(CONFIG_WORD_SIZE)e.o
 obj-$(CONFIG_PPC64)		+= mmap_64.o
 hash64-$(CONFIG_PPC_NATIVE)	:= hash_native_64.o
 obj-$(CONFIG_PPC_STD_MMU_64)	+= hash_utils_64.o \
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index 61187bec750..9efc8bda01b 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -57,15 +57,35 @@ config E200
 
 endchoice
 
-config PPC_BOOK3S_64
-	def_bool y
+choice
+	prompt "Processor Type"
 	depends on PPC64
+	help
+	  There are two families of 64 bit PowerPC chips supported.
+	  The most common ones are the desktop and server CPUs
+	  (POWER3, RS64, POWER4, POWER5, POWER5+, POWER6, ...)
+
+	  The other are the "embedded" processors compliant with the
+	  "Book 3E" variant of the architecture
+
+config PPC_BOOK3S_64
+	bool "Server processors"
 	select PPC_FPU
 
+config PPC_BOOK3E_64
+	bool "Embedded processors"
+	select PPC_FPU # Make it a choice ?
+
+endchoice
+
 config PPC_BOOK3S
 	def_bool y
 	depends on PPC_BOOK3S_32 || PPC_BOOK3S_64
 
+config PPC_BOOK3E
+	def_bool y
+	depends on PPC_BOOK3E_64
+
 config POWER4_ONLY
 	bool "Optimize for POWER4"
 	depends on PPC64 && PPC_BOOK3S
@@ -125,7 +145,7 @@ config 4xx
 
 config BOOKE
 	bool
-	depends on E200 || E500 || 44x
+	depends on E200 || E500 || 44x || PPC_BOOK3E
 	default y
 
 config FSL_BOOKE
@@ -223,9 +243,17 @@ config PPC_MMU_NOHASH
 	def_bool y
 	depends on !PPC_STD_MMU
 
+config PPC_MMU_NOHASH_32
+	def_bool y
+	depends on PPC_MMU_NOHASH && PPC32
+
+config PPC_MMU_NOHASH_64
+	def_bool y
+	depends on PPC_MMU_NOHASH && PPC64
+
 config PPC_BOOK3E_MMU
 	def_bool y
-	depends on FSL_BOOKE
+	depends on FSL_BOOKE || PPC_BOOK3E
 
 config PPC_MM_SLICES
 	bool
@@ -257,7 +285,7 @@ config PPC_PERF_CTRS
          This enables the powerpc-specific perf_counter back-end.
 
 config SMP
-	depends on PPC_STD_MMU || FSL_BOOKE
+	depends on PPC_BOOK3S || PPC_BOOK3E || FSL_BOOKE
 	bool "Symmetric multi-processing support"
 	---help---
 	  This enables support for systems with more than one CPU. If you have
diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index e1f33a81e5e..0e09a45ac79 100644
--- a/arch/powerpc/xmon/xmon.c
+++ b/arch/powerpc/xmon/xmon.c
@@ -2570,7 +2570,7 @@ static void xmon_print_symbol(unsigned long address, const char *mid,
 	printf("%s", after);
 }
 
-#ifdef CONFIG_PPC64
+#ifdef CONFIG_PPC_BOOK3S_64
 static void dump_slb(void)
 {
 	int i;
-- 
cgit v1.2.3


From af984b816530b4725b92e01ecfba7c5e3eab910d Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Thu, 6 Aug 2009 13:50:58 +1000
Subject: powerpc/mm: Fix encoding of page table cache numbers

The mask used to encode the page table cache number in the
batch when freeing page tables was too small for the new
possible values of MMU page sizes. This increases it along
with a comment explaining the constraints.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/pgalloc.h | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/pgalloc.h b/arch/powerpc/include/asm/pgalloc.h
index 34b080671f0..f2e812de7c3 100644
--- a/arch/powerpc/include/asm/pgalloc.h
+++ b/arch/powerpc/include/asm/pgalloc.h
@@ -28,7 +28,12 @@ typedef struct pgtable_free {
 	unsigned long val;
 } pgtable_free_t;
 
-#define PGF_CACHENUM_MASK	0x7
+/* This needs to be big enough to allow for MMU_PAGE_COUNT + 2 to be stored
+ * and small enough to fit in the low bits of any naturally aligned page
+ * table cache entry. Arbitrarily set to 0x1f, that should give us some
+ * room to grow
+ */
+#define PGF_CACHENUM_MASK	0x1f
 
 static inline pgtable_free_t pgtable_free_cache(void *p, int cachenum,
 						unsigned long mask)
-- 
cgit v1.2.3


From 67050b5c3e9992d98554bd224d5a7898cc4881ff Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@kernel.crashing.org>
Date: Tue, 4 Aug 2009 22:33:32 -0500
Subject: powerpc/mm: Fix switch_mmu_context to iterate of the proper list of
 cpus

Introduced a temporary variable into our iterating over the list cpus
that are threads on the same core.  For some reason Ben forgot how for
loops work.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/mm/mmu_context_nohash.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/mm/mmu_context_nohash.c b/arch/powerpc/mm/mmu_context_nohash.c
index 834436d6d6b..c2f93dc470e 100644
--- a/arch/powerpc/mm/mmu_context_nohash.c
+++ b/arch/powerpc/mm/mmu_context_nohash.c
@@ -190,7 +190,7 @@ static void context_check_map(void) { }
 
 void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next)
 {
-	unsigned int id, cpu = smp_processor_id();
+	unsigned int i, id, cpu = smp_processor_id();
 	unsigned long *map;
 
 	/* No lockless fast path .. yet */
@@ -269,9 +269,10 @@ void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next)
 		local_flush_tlb_mm(next);
 
 		/* XXX This clear should ultimately be part of local_flush_tlb_mm */
-		for (cpu = cpu_first_thread_in_core(cpu);
-		     cpu <= cpu_last_thread_in_core(cpu); cpu++)
-			__clear_bit(id, stale_map[cpu]);
+		for (i = cpu_first_thread_in_core(cpu);
+		     i <= cpu_last_thread_in_core(cpu); i++) {
+			__clear_bit(id, stale_map[i]);
+		}
 	}
 
 	/* Flick the MMU and release lock */
-- 
cgit v1.2.3


From 20d70345f181be6bdd5b0a76a408d0693683bf3d Mon Sep 17 00:00:00 2001
From: Stefan Roese <sr@denx.de>
Date: Wed, 29 Jul 2009 07:04:46 +0000
Subject: powerpc: Add AMCC 460EX/460GT Rev. B support to cputable.c

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/cputable.c | 30 ++++++++++++++++++++++++++++--
 1 file changed, 28 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index f34ea37079b..9f38ecb1785 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -1653,7 +1653,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.platform		= "ppc440",
 	},
 	{ /* 460EX */
-		.pvr_mask		= 0xffff0002,
+		.pvr_mask		= 0xffff0006,
 		.pvr_value		= 0x13020002,
 		.cpu_name		= "460EX",
 		.cpu_features		= CPU_FTRS_440x6,
@@ -1665,8 +1665,21 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.machine_check		= machine_check_440A,
 		.platform		= "ppc440",
 	},
+	{ /* 460EX Rev B */
+		.pvr_mask		= 0xffff0007,
+		.pvr_value		= 0x13020004,
+		.cpu_name		= "460EX Rev. B",
+		.cpu_features		= CPU_FTRS_440x6,
+		.cpu_user_features	= COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU,
+		.mmu_features		= MMU_FTR_TYPE_44x,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+		.cpu_setup		= __setup_cpu_460ex,
+		.machine_check		= machine_check_440A,
+		.platform		= "ppc440",
+	},
 	{ /* 460GT */
-		.pvr_mask		= 0xffff0002,
+		.pvr_mask		= 0xffff0006,
 		.pvr_value		= 0x13020000,
 		.cpu_name		= "460GT",
 		.cpu_features		= CPU_FTRS_440x6,
@@ -1678,6 +1691,19 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.machine_check		= machine_check_440A,
 		.platform		= "ppc440",
 	},
+	{ /* 460GT Rev B */
+		.pvr_mask		= 0xffff0007,
+		.pvr_value		= 0x13020005,
+		.cpu_name		= "460GT Rev. B",
+		.cpu_features		= CPU_FTRS_440x6,
+		.cpu_user_features	= COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU,
+		.mmu_features		= MMU_FTR_TYPE_44x,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+		.cpu_setup		= __setup_cpu_460gt,
+		.machine_check		= machine_check_440A,
+		.platform		= "ppc440",
+	},
 	{ /* 460SX */
 		.pvr_mask		= 0xffffff00,
 		.pvr_value		= 0x13541800,
-- 
cgit v1.2.3


From 88eeb72ec4c1ed7defff0f154c5b56798e038e2a Mon Sep 17 00:00:00 2001
From: Stefan Roese <sr@denx.de>
Date: Wed, 29 Jul 2009 07:05:01 +0000
Subject: powerpc/44x: Add NAND support to Canyonlands dts

Also some whitespace cleanup in the USB device nodes.

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/boot/dts/canyonlands.dts | 49 +++++++++++++++++++++++++----------
 1 file changed, 36 insertions(+), 13 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/boot/dts/canyonlands.dts b/arch/powerpc/boot/dts/canyonlands.dts
index 5fd1ad09bdf..c920170b7df 100644
--- a/arch/powerpc/boot/dts/canyonlands.dts
+++ b/arch/powerpc/boot/dts/canyonlands.dts
@@ -1,7 +1,7 @@
 /*
  * Device Tree Source for AMCC Canyonlands (460EX)
  *
- * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ * Copyright 2008-2009 DENX Software Engineering, Stefan Roese <sr@denx.de>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2.  This program is licensed "as is" without
@@ -149,19 +149,19 @@
 					/*RXDE*/  0x5 0x4>;
 		};
 
-                USB0: ehci@bffd0400 {
-                        compatible = "ibm,usb-ehci-460ex", "usb-ehci";
-                        interrupt-parent = <&UIC2>;
-                        interrupts = <0x1d 4>;
-                        reg = <4 0xbffd0400 0x90 4 0xbffd0490 0x70>;
-                };
+		USB0: ehci@bffd0400 {
+			compatible = "ibm,usb-ehci-460ex", "usb-ehci";
+			interrupt-parent = <&UIC2>;
+			interrupts = <0x1d 4>;
+			reg = <4 0xbffd0400 0x90 4 0xbffd0490 0x70>;
+		};
 
-                USB1: usb@bffd0000 {
-                        compatible = "ohci-le";
-                        reg = <4 0xbffd0000 0x60>;
-                        interrupt-parent = <&UIC2>;
-                        interrupts = <0x1e 4>;
-                };
+		USB1: usb@bffd0000 {
+			compatible = "ohci-le";
+			reg = <4 0xbffd0000 0x60>;
+			interrupt-parent = <&UIC2>;
+			interrupts = <0x1e 4>;
+		};
 
 		POB0: opb {
 			compatible = "ibm,opb-460ex", "ibm,opb";
@@ -215,6 +215,29 @@
 						reg = <0x03fa0000 0x00060000>;
 					};
 				};
+
+				ndfc@3,0 {
+					compatible = "ibm,ndfc";
+					reg = <0x00000003 0x00000000 0x00002000>;
+					ccr = <0x00001000>;
+					bank-settings = <0x80002222>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					nand {
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						partition@0 {
+							label = "u-boot";
+							reg = <0x00000000 0x00100000>;
+						};
+						partition@100000 {
+							label = "user";
+							reg = <0x00000000 0x03f00000>;
+						};
+					};
+				};
 			};
 
 			UART0: serial@ef600300 {
-- 
cgit v1.2.3


From 13ae564f1db967dd4ea244f21f3dad6a28fa351c Mon Sep 17 00:00:00 2001
From: Stefan Roese <sr@denx.de>
Date: Wed, 29 Jul 2009 01:40:56 +0000
Subject: powerpc/40x: Update Kilauea dts to support NAND, RTC and HWMON

This patch adds support for the following devices to the Kilauea dts:
- PPC4xx NAND controller (NDFC)
- I2C RTC (Dallas DS1338)
- I2C HWMON (Dallas DS1775)

Additionally the partitioning of the NOR FLASH is changed. The dtb
partition has been missing. Fixed in this patch.

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/boot/dts/kilauea.dts | 44 ++++++++++++++++++++++++++++++++++++---
 1 file changed, 41 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/boot/dts/kilauea.dts b/arch/powerpc/boot/dts/kilauea.dts
index 5e6b08ff6f6..c46561456ed 100644
--- a/arch/powerpc/boot/dts/kilauea.dts
+++ b/arch/powerpc/boot/dts/kilauea.dts
@@ -1,7 +1,7 @@
 /*
  * Device Tree Source for AMCC Kilauea (405EX)
  *
- * Copyright 2007 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ * Copyright 2007-2009 DENX Software Engineering, Stefan Roese <sr@denx.de>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2.  This program is licensed "as is" without
@@ -150,7 +150,11 @@
 					#size-cells = <1>;
 					partition@0 {
 						label = "kernel";
-						reg = <0x00000000 0x00200000>;
+						reg = <0x00000000 0x001e0000>;
+					};
+					partition@1e0000 {
+						label = "dtb";
+						reg = <0x001e0000 0x00020000>;
 					};
 					partition@200000 {
 						label = "root";
@@ -169,6 +173,29 @@
 						reg = <0x03fa0000 0x00060000>;
 					};
 				};
+
+				ndfc@1,0 {
+					compatible = "ibm,ndfc";
+					reg = <0x00000001 0x00000000 0x00002000>;
+					ccr = <0x00001000>;
+					bank-settings = <0x80002222>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					nand {
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						partition@0 {
+							label = "u-boot";
+							reg = <0x00000000 0x00100000>;
+						};
+						partition@100000 {
+							label = "user";
+							reg = <0x00000000 0x03f00000>;
+						};
+					};
+				};
 			};
 
 			UART0: serial@ef600200 {
@@ -198,6 +225,18 @@
 				reg = <0xef600400 0x00000014>;
 				interrupt-parent = <&UIC0>;
 				interrupts = <0x2 0x4>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				rtc@68 {
+					compatible = "dallas,ds1338";
+					reg = <0x68>;
+				};
+
+				dtt@48 {
+					compatible = "dallas,ds1775";
+					reg = <0x48>;
+				};
 			};
 
 			IIC1: i2c@ef600500 {
@@ -207,7 +246,6 @@
 				interrupts = <0x7 0x4>;
 			};
 
-
 			RGMII0: emac-rgmii@ef600b00 {
 				compatible = "ibm,rgmii-405ex", "ibm,rgmii";
 				reg = <0xef600b00 0x00000104>;
-- 
cgit v1.2.3


From 0e8e844246fcf9c38906b62e5d05891dbbda5754 Mon Sep 17 00:00:00 2001
From: Stefan Roese <sr@denx.de>
Date: Wed, 29 Jul 2009 07:05:11 +0000
Subject: powerpc/44x: Update Canyonlands defconfig to support NOR, NAND and
 RTC

This patch adds support for the following devices to the Canyonlands
defconfig file:
- NOR FLASH
- PPC4xx NAND controller (NDFC)
- I2C RTC (M41T80)

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/configs/44x/canyonlands_defconfig | 350 +++++++++++++++++++++----
 1 file changed, 297 insertions(+), 53 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/configs/44x/canyonlands_defconfig b/arch/powerpc/configs/44x/canyonlands_defconfig
index 5e85412eb9f..b312b166be6 100644
--- a/arch/powerpc/configs/44x/canyonlands_defconfig
+++ b/arch/powerpc/configs/44x/canyonlands_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc3
-# Mon Feb  2 13:13:04 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 17:27:20 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -31,15 +31,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -53,11 +54,14 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
 CONFIG_PPC_DCR_NATIVE=y
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -71,6 +75,7 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
@@ -93,8 +98,12 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
@@ -104,23 +113,30 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -128,6 +144,12 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -139,8 +161,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -176,6 +197,7 @@ CONFIG_PPC4xx_PCI_EXPRESS=y
 # CONFIG_ARCHES is not set
 CONFIG_CANYONLANDS=y
 # CONFIG_GLACIER is not set
+# CONFIG_REDWOOD is not set
 # CONFIG_YOSEMITE is not set
 # CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
 CONFIG_PPC44x_SIMPLE=y
@@ -218,6 +240,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
@@ -237,10 +260,14 @@ CONFIG_PHYS_ADDR_T_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_STDBINUTILS=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
@@ -265,6 +292,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -282,14 +310,12 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -339,6 +365,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -351,7 +379,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
@@ -375,7 +402,101 @@ CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=y
 CONFIG_PROC_EVENTS=y
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+CONFIG_MTD_NAND_ECC_SMC=y
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+CONFIG_MTD_NAND_NDFC=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_CAFE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_NAND_FSL_ELBC is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
@@ -418,7 +539,11 @@ CONFIG_HAVE_IDE=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -439,6 +564,8 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 CONFIG_IBM_NEW_EMAC=y
@@ -457,6 +584,7 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
@@ -467,7 +595,6 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -542,7 +669,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -608,14 +734,17 @@ CONFIG_I2C_IBM_IIC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -640,6 +769,7 @@ CONFIG_SENSORS_AD7414=y
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -654,11 +784,14 @@ CONFIG_SENSORS_AD7414=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -666,6 +799,7 @@ CONFIG_SENSORS_AD7414=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -700,24 +834,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -759,6 +878,7 @@ CONFIG_USB_MON=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=m
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -767,9 +887,9 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
 CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
+CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PCI=y
 CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
 CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
@@ -789,11 +909,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_LIBUSUAL=y
 
@@ -821,7 +941,6 @@ CONFIG_USB_LIBUSUAL=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -837,6 +956,7 @@ CONFIG_USB_LIBUSUAL=y
 #
 # OTG and related infrastructure
 #
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -844,9 +964,70 @@ CONFIG_USB_LIBUSUAL=y
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+CONFIG_RTC_DRV_M41T80=y
+# CONFIG_RTC_DRV_M41T80_WDT is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -860,11 +1041,12 @@ CONFIG_EXT2_FS=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -873,6 +1055,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -906,6 +1093,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -916,6 +1104,7 @@ CONFIG_CRAMFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -927,7 +1116,6 @@ CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -941,8 +1129,48 @@ CONFIG_SUNRPC=y
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -957,11 +1185,13 @@ CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -979,6 +1209,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -989,6 +1222,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1000,7 +1236,6 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1008,27 +1243,36 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-
-#
-# Tracers
-#
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_PPC_EMULATED_STATS is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
-- 
cgit v1.2.3


From 6b045a818f1d0b9b68c1d47e745d521dd115991a Mon Sep 17 00:00:00 2001
From: Stefan Roese <sr@denx.de>
Date: Wed, 29 Jul 2009 01:41:06 +0000
Subject: powerpc/40x: Update kilauea defconfig to support NAND, RTC and HWMON

This patch adds support for the following devices to the Kilauea
defconfig file:
- PPC4xx NAND controller (NDFC)
- I2C RTC (Dallas DS1338)
- I2C HWMON (Dallas DS1775)

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/configs/40x/kilauea_defconfig | 298 +++++++++++++++++++++++++----
 1 file changed, 256 insertions(+), 42 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/configs/40x/kilauea_defconfig b/arch/powerpc/configs/40x/kilauea_defconfig
index 865725effe9..9a05ec0ec31 100644
--- a/arch/powerpc/configs/40x/kilauea_defconfig
+++ b/arch/powerpc/configs/40x/kilauea_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc7
-# Wed Jun  3 10:18:16 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 13:28:37 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 CONFIG_40x=y
@@ -32,11 +32,11 @@ CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -57,6 +57,7 @@ CONFIG_PPC_DCR_NATIVE=y
 CONFIG_PPC_DCR=y
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -108,7 +109,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -121,9 +121,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -137,6 +144,11 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -149,7 +161,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-CONFIG_LBD=y
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -220,6 +232,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
@@ -239,9 +252,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -344,6 +357,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -393,9 +407,8 @@ CONFIG_MTD_OF_PARTS=y
 # User Modules And Translation Layers
 #
 CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=m
-CONFIG_MTD_BLOCK=m
-# CONFIG_MTD_BLOCK_RO is not set
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
@@ -452,7 +465,17 @@ CONFIG_MTD_PHYSMAP_OF=y
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+CONFIG_MTD_NAND_ECC_SMC=y
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+CONFIG_MTD_NAND_NDFC=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_CAFE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_NAND_FSL_ELBC is not set
 # CONFIG_MTD_ONENAND is not set
 
 #
@@ -465,6 +488,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 #
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -504,14 +528,17 @@ CONFIG_HAVE_IDE=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -546,6 +573,7 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
@@ -621,20 +649,150 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_IBM_IIC=y
+# CONFIG_I2C_MPC is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+CONFIG_SENSORS_LM75=y
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
 CONFIG_THERMAL=y
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -649,24 +807,15 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -691,10 +840,69 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=y
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_GENERIC is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -708,11 +916,12 @@ CONFIG_EXT2_FS=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -818,6 +1027,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -848,6 +1058,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -859,7 +1072,6 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -873,16 +1085,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -891,6 +1102,9 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-- 
cgit v1.2.3


From 189339d47d30ad171aa1c95ffc90a6177b3ce4a8 Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@kernel.crashing.org>
Date: Thu, 30 Jul 2009 17:56:38 -0500
Subject: powerpc/85xx: Move mpc8536ds.dts to address-cells/size-cells = <2>

Change the top-level #address-cells and #size-cells to <2> so the
mpc8536ds.dts is easier to deal with both a true 32-bit physical
or 36-bit physical address space.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/boot/dts/mpc8536ds.dts | 32 ++++++++++++++++----------------
 1 file changed, 16 insertions(+), 16 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/boot/dts/mpc8536ds.dts b/arch/powerpc/boot/dts/mpc8536ds.dts
index e781ad2f1f8..22caf69e6ef 100644
--- a/arch/powerpc/boot/dts/mpc8536ds.dts
+++ b/arch/powerpc/boot/dts/mpc8536ds.dts
@@ -14,8 +14,8 @@
 / {
 	model = "fsl,mpc8536ds";
 	compatible = "fsl,mpc8536ds";
-	#address-cells = <1>;
-	#size-cells = <1>;
+	#address-cells = <2>;
+	#size-cells = <2>;
 
 	aliases {
 		ethernet0 = &enet0;
@@ -42,7 +42,7 @@
 
 	memory {
 		device_type = "memory";
-		reg = <00000000 00000000>;	// Filled by U-Boot
+		reg = <0 0 0 0>;	// Filled by U-Boot
 	};
 
 	soc@ffe00000 {
@@ -50,7 +50,7 @@
 		#size-cells = <1>;
 		device_type = "soc";
 		compatible = "simple-bus";
-		ranges = <0x0 0xffe00000 0x100000>;
+		ranges = <0x0 0 0xffe00000 0x100000>;
 		bus-frequency = <0>;		// Filled out by uboot.
 
 		ecm-law@0 {
@@ -347,13 +347,13 @@
 		interrupt-parent = <&mpic>;
 		interrupts = <24 0x2>;
 		bus-range = <0 0xff>;
-		ranges = <0x02000000 0 0x80000000 0x80000000 0 0x10000000
-			  0x01000000 0 0x00000000 0xffc00000 0 0x00010000>;
+		ranges = <0x02000000 0 0x80000000 0 0x80000000 0 0x10000000
+			  0x01000000 0 0x00000000 0 0xffc00000 0 0x00010000>;
 		clock-frequency = <66666666>;
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
-		reg = <0xffe08000 0x1000>;
+		reg = <0 0xffe08000 0 0x1000>;
 	};
 
 	pci1: pcie@ffe09000 {
@@ -362,10 +362,10 @@
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
-		reg = <0xffe09000 0x1000>;
+		reg = <0 0xffe09000 0 0x1000>;
 		bus-range = <0 0xff>;
-		ranges = <0x02000000 0 0x98000000 0x98000000 0 0x08000000
-			  0x01000000 0 0x00000000 0xffc20000 0 0x00010000>;
+		ranges = <0x02000000 0 0x98000000 0 0x98000000 0 0x08000000
+			  0x01000000 0 0x00000000 0 0xffc20000 0 0x00010000>;
 		clock-frequency = <33333333>;
 		interrupt-parent = <&mpic>;
 		interrupts = <25 0x2>;
@@ -398,10 +398,10 @@
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
-		reg = <0xffe0a000 0x1000>;
+		reg = <0 0xffe0a000 0 0x1000>;
 		bus-range = <0 0xff>;
-		ranges = <0x02000000 0 0x90000000 0x90000000 0 0x08000000
-			  0x01000000 0 0x00000000 0xffc10000 0 0x00010000>;
+		ranges = <0x02000000 0 0x90000000 0 0x90000000 0 0x08000000
+			  0x01000000 0 0x00000000 0 0xffc10000 0 0x00010000>;
 		clock-frequency = <33333333>;
 		interrupt-parent = <&mpic>;
 		interrupts = <26 0x2>;
@@ -434,10 +434,10 @@
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
-		reg = <0xffe0b000 0x1000>;
+		reg = <0 0xffe0b000 0 0x1000>;
 		bus-range = <0 0xff>;
-		ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x20000000
-			  0x01000000 0 0x00000000 0xffc30000 0 0x00010000>;
+		ranges = <0x02000000 0 0xa0000000 0 0xa0000000 0 0x20000000
+			  0x01000000 0 0x00000000 0 0xffc30000 0 0x00010000>;
 		clock-frequency = <33333333>;
 		interrupt-parent = <&mpic>;
 		interrupts = <27 0x2>;
-- 
cgit v1.2.3


From b6c316a1f6447d6dd0fd8d443b66643e328e04fa Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@kernel.crashing.org>
Date: Thu, 30 Jul 2009 17:56:54 -0500
Subject: powerpc/85xx: Added 36-bit physical device tree for mpc8536ds board

Added a device tree that should be similiar to mpc8536ds.dtb except
the physical addresses for all IO are above the 4G boundary.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/boot/dts/mpc8536ds_36b.dts | 467 ++++++++++++++++++++++++++++++++
 1 file changed, 467 insertions(+)
 create mode 100644 arch/powerpc/boot/dts/mpc8536ds_36b.dts

(limited to 'arch')

diff --git a/arch/powerpc/boot/dts/mpc8536ds_36b.dts b/arch/powerpc/boot/dts/mpc8536ds_36b.dts
new file mode 100644
index 00000000000..113ed8b7c89
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8536ds_36b.dts
@@ -0,0 +1,467 @@
+/*
+ * MPC8536 DS Device Tree Source
+ *
+ * Copyright 2008-2009 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "fsl,mpc8536ds";
+	compatible = "fsl,mpc8536ds";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+		pci1 = &pci1;
+		pci2 = &pci2;
+		pci3 = &pci3;
+	};
+
+	cpus {
+		#cpus = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8536@0 {
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0 0 0>;	// Filled by U-Boot
+	};
+
+	soc@fffe00000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "simple-bus";
+		ranges = <0x0 0xf 0xffe00000 0x100000>;
+		bus-frequency = <0>;		// Filled out by uboot.
+
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <12>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8536-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		memory-controller@2000 {
+			compatible = "fsl,mpc8536-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 0x2>;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,mpc8536-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <16 0x2>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 0x2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <43 0x2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+			rtc@68 {
+				compatible = "dallas,ds3232";
+				reg = <0x68>;
+				interrupts = <0 0x1>;
+				interrupt-parent = <&mpic>;
+			};
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8536-dma", "fsl,eloplus-dma";
+			reg = <0x21300 4>;
+			ranges = <0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8536-dma-channel",
+					     "fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8536-dma-channel",
+					     "fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8536-dma-channel",
+					     "fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8536-dma-channel",
+					     "fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		usb@22000 {
+			compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
+			reg = <0x22000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <&mpic>;
+			interrupts = <28 0x2>;
+			phy_type = "ulpi";
+		};
+
+		usb@23000 {
+			compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
+			reg = <0x23000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <&mpic>;
+			interrupts = <46 0x2>;
+			phy_type = "ulpi";
+		};
+
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <29 2 30 2 34 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy1>;
+			phy-connection-type = "rgmii-id";
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+
+				phy0: ethernet-phy@0 {
+					interrupt-parent = <&mpic>;
+					interrupts = <10 0x1>;
+					reg = <0>;
+					device_type = "ethernet-phy";
+				};
+				phy1: ethernet-phy@1 {
+					interrupt-parent = <&mpic>;
+					interrupts = <10 0x1>;
+					reg = <1>;
+					device_type = "ethernet-phy";
+				};
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet1: ethernet@26000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x26000 0x1000>;
+			ranges = <0x0 0x26000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <31 2 32 2 33 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi1>;
+			phy-handle = <&phy0>;
+			phy-connection-type = "rgmii-id";
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		usb@2b000 {
+			compatible = "fsl,mpc8536-usb2-dr", "fsl-usb2-dr";
+			reg = <0x2b000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <&mpic>;
+			interrupts = <60 0x2>;
+			dr_mode = "peripheral";
+			phy_type = "ulpi";
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 0x2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 0x2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
+				     "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2 58 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x9fe>;
+			fsl,descriptor-types-mask = <0x3ab0ebf>;
+		};
+
+		sata@18000 {
+			compatible = "fsl,mpc8536-sata", "fsl,pq-sata";
+			reg = <0x18000 0x1000>;
+			cell-index = <1>;
+			interrupts = <74 0x2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		sata@19000 {
+			compatible = "fsl,mpc8536-sata", "fsl,pq-sata";
+			reg = <0x19000 0x1000>;
+			cell-index = <2>;
+			interrupts = <41 0x2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		global-utilities@e0000 {	//global utilities block
+			compatible = "fsl,mpc8548-guts";
+			reg = <0xe0000 0x1000>;
+			fsl,has-rstcr;
+		};
+
+		mpic: pic@40000 {
+			clock-frequency = <0>;
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+			big-endian;
+		};
+
+		msi@41600 {
+			compatible = "fsl,mpc8536-msi", "fsl,mpic-msi";
+			reg = <0x41600 0x80>;
+			msi-available-ranges = <0 0x100>;
+			interrupts = <
+				0xe0 0
+				0xe1 0
+				0xe2 0
+				0xe3 0
+				0xe4 0
+				0xe5 0
+				0xe6 0
+				0xe7 0>;
+			interrupt-parent = <&mpic>;
+		};
+	};
+
+	pci0: pci@fffe08000 {
+		compatible = "fsl,mpc8540-pci";
+		device_type = "pci";
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+
+			/* IDSEL 0x11 J17 Slot 1 */
+			0x8800 0 0 1 &mpic 1 1
+			0x8800 0 0 2 &mpic 2 1
+			0x8800 0 0 3 &mpic 3 1
+			0x8800 0 0 4 &mpic 4 1>;
+
+		interrupt-parent = <&mpic>;
+		interrupts = <24 0x2>;
+		bus-range = <0 0xff>;
+		ranges = <0x02000000 0 0xf0000000 0xc 0x00000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xf 0xffc00000 0 0x00010000>;
+		clock-frequency = <66666666>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xf 0xffe08000 0 0x1000>;
+	};
+
+	pci1: pcie@fffe09000 {
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xf 0xffe09000 0 0x1000>;
+		bus-range = <0 0xff>;
+		ranges = <0x02000000 0 0xf8000000 0xc 0x18000000 0 0x08000000
+			  0x01000000 0 0x00000000 0xf 0xffc20000 0 0x00010000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <25 0x2>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 4 1
+			0000 0 0 2 &mpic 5 1
+			0000 0 0 3 &mpic 6 1
+			0000 0 0 4 &mpic 7 1
+			>;
+		pcie@0 {
+			reg = <0 0 0 0 0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x02000000 0 0xf8000000
+				  0x02000000 0 0xf8000000
+				  0 0x08000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci2: pcie@fffe0a000 {
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xf 0xffe0a000 0 0x1000>;
+		bus-range = <0 0xff>;
+		ranges = <0x02000000 0 0xf8000000 0xc 0x10000000 0 0x08000000
+			  0x01000000 0 0x00000000 0xf 0xffc10000 0 0x00010000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <26 0x2>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 0 1
+			0000 0 0 2 &mpic 1 1
+			0000 0 0 3 &mpic 2 1
+			0000 0 0 4 &mpic 3 1
+			>;
+		pcie@0 {
+			reg = <0 0 0 0 0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x02000000 0 0xf8000000
+				  0x02000000 0 0xf8000000
+				  0 0x08000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci3: pcie@fffe0b000 {
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xf 0xffe0b000 0 0x1000>;
+		bus-range = <0 0xff>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xffc30000 0 0x00010000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <27 0x2>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 8 1
+			0000 0 0 2 &mpic 9 1
+			0000 0 0 3 &mpic 10 1
+			0000 0 0 4 &mpic 11 1
+			>;
+
+		pcie@0 {
+			reg = <0 0 0 0 0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00100000>;
+		};
+	};
+};
-- 
cgit v1.2.3


From 8dcd038a13b8e322c49fe0d3e31a0deaba4fd5fd Mon Sep 17 00:00:00 2001
From: Roel Kluin <roel.kluin@gmail.com>
Date: Thu, 6 Aug 2009 16:00:37 -0700
Subject: powerpc/fsl-booke: read buffer overflow

cam[tlbcam_index] is checked before tlbcam_index < ARRAY_SIZE(cam)

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/mm/fsl_booke_mmu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/mm/fsl_booke_mmu.c b/arch/powerpc/mm/fsl_booke_mmu.c
index bb3d65998e6..dc93e95b256 100644
--- a/arch/powerpc/mm/fsl_booke_mmu.c
+++ b/arch/powerpc/mm/fsl_booke_mmu.c
@@ -161,7 +161,7 @@ unsigned long __init mmu_mapin_ram(void)
 	unsigned long virt = PAGE_OFFSET;
 	phys_addr_t phys = memstart_addr;
 
-	while (cam[tlbcam_index] && tlbcam_index < ARRAY_SIZE(cam)) {
+	while (tlbcam_index < ARRAY_SIZE(cam) && cam[tlbcam_index]) {
 		settlbcam(tlbcam_index, virt, phys, cam[tlbcam_index], PAGE_KERNEL_X, 0);
 		virt += cam[tlbcam_index];
 		phys += cam[tlbcam_index];
-- 
cgit v1.2.3


From 6c75933c00049bee59562a18843a4f133ec2bfe4 Mon Sep 17 00:00:00 2001
From: Julia Lawall <julia@diku.dk>
Date: Fri, 7 Aug 2009 09:00:34 +0200
Subject: powerpc/fsl_rio: Add kmalloc NULL tests

Check that the result of kmalloc/kzalloc is not NULL before dereferencing it.

The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression *x;
identifier f;
constant char *C;
@@

x = \(kmalloc\|kcalloc\|kzalloc\)(...);
... when != x == NULL
    when != x != NULL
    when != (x || ...)
(
kfree(x)
|
f(...,C,...,x,...)
|
*f(...,x,...)
|
*x->f
)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/sysdev/fsl_rio.c | 18 ++++++++++++++----
 1 file changed, 14 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c
index cbb3bed75d3..757a83fe5e5 100644
--- a/arch/powerpc/sysdev/fsl_rio.c
+++ b/arch/powerpc/sysdev/fsl_rio.c
@@ -1057,6 +1057,10 @@ int fsl_rio_setup(struct of_device *dev)
 			law_start, law_size);
 
 	ops = kmalloc(sizeof(struct rio_ops), GFP_KERNEL);
+	if (!ops) {
+		rc = -ENOMEM;
+		goto err_ops;
+	}
 	ops->lcread = fsl_local_config_read;
 	ops->lcwrite = fsl_local_config_write;
 	ops->cread = fsl_rio_config_read;
@@ -1064,6 +1068,10 @@ int fsl_rio_setup(struct of_device *dev)
 	ops->dsend = fsl_rio_doorbell_send;
 
 	port = kzalloc(sizeof(struct rio_mport), GFP_KERNEL);
+	if (!port) {
+		rc = -ENOMEM;
+		goto err_port;
+	}
 	port->id = 0;
 	port->index = 0;
 
@@ -1071,7 +1079,7 @@ int fsl_rio_setup(struct of_device *dev)
 	if (!priv) {
 		printk(KERN_ERR "Can't alloc memory for 'priv'\n");
 		rc = -ENOMEM;
-		goto err;
+		goto err_priv;
 	}
 
 	INIT_LIST_HEAD(&port->dbells);
@@ -1169,11 +1177,13 @@ int fsl_rio_setup(struct of_device *dev)
 
 	return 0;
 err:
-	if (priv)
-		iounmap(priv->regs_win);
-	kfree(ops);
+	iounmap(priv->regs_win);
 	kfree(priv);
+err_priv:
 	kfree(port);
+err_port:
+	kfree(ops);
+err_ops:
 	return rc;
 }
 
-- 
cgit v1.2.3


From 8640d3bf71fa0f25adf86527fe69a32372427d4b Mon Sep 17 00:00:00 2001
From: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Date: Wed, 5 Aug 2009 21:41:12 +0200
Subject: powerpc/ipic: unmask all interrupt sources

in case the interrupt controller was used in an earlier life then it is
possible it is that some of its sources were used and are still unmask.
If the (unmasked) device is active and is creating interrupts (or one
interrupts was pending since the interrupts were disabled) then the boot
process "ends" very soon. Once external interrupts are enabled, we land in
-> do_IRQ
  -> call ppc_md.get_irq()
     -> ipic_read() gets the source number
     -> irq_linear_revmap(source)
        -> revmap[source] == NO_IRQ
           -> irq_find_mapping(source) returns NO_IRQ because no source
              is registered
  -> source is NO_IRQ, ppc_spurious_interrupts gets incremented, no
     further action.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/sysdev/ipic.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/sysdev/ipic.c b/arch/powerpc/sysdev/ipic.c
index 69e2630c906..ebb7e584401 100644
--- a/arch/powerpc/sysdev/ipic.c
+++ b/arch/powerpc/sysdev/ipic.c
@@ -781,6 +781,9 @@ struct ipic * __init ipic_init(struct device_node *node, unsigned int flags)
 	primary_ipic = ipic;
 	irq_set_default_host(primary_ipic->irqhost);
 
+	ipic_write(ipic->regs, IPIC_SIMSR_H, 0);
+	ipic_write(ipic->regs, IPIC_SIMSR_L, 0);
+
 	printk ("IPIC (%d IRQ sources) at %p\n", NR_IPIC_INTS,
 			primary_ipic->regs);
 
-- 
cgit v1.2.3


From 9239c89bc9c51c412b89eb8040077eaaee361326 Mon Sep 17 00:00:00 2001
From: Heiko Schocher <hs@denx.de>
Date: Mon, 3 Aug 2009 09:34:50 +0200
Subject: powerpc/82xx: mgcoge - updates for 2.6.32

- add I2C support
- add FCC1 and FCC2 support
- fix bogus gpio numbering in plattform code

Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/boot/dts/mgcoge.dts     | 53 +++++++++++++++++++++++++++
 arch/powerpc/platforms/82xx/mgcoge.c | 69 +++++++++++++++++++++++++++++++-----
 2 files changed, 113 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/boot/dts/mgcoge.dts b/arch/powerpc/boot/dts/mgcoge.dts
index 633255a9755..0ce96644176 100644
--- a/arch/powerpc/boot/dts/mgcoge.dts
+++ b/arch/powerpc/boot/dts/mgcoge.dts
@@ -162,6 +162,59 @@
 				fixed-link = <0 0 10 0 0>;
 			};
 
+			i2c@11860 {
+				compatible = "fsl,mpc8272-i2c",
+					     "fsl,cpm2-i2c";
+				reg = <0x11860 0x20 0x8afc 0x2>;
+				interrupts = <1 8>;
+				interrupt-parent = <&PIC>;
+				fsl,cpm-command = <0x29600000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			mdio@10d40 {
+				compatible = "fsl,cpm2-mdio-bitbang";
+				reg = <0x10d00 0x14>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				fsl,mdio-pin = <12>;
+				fsl,mdc-pin = <13>;
+
+				phy0: ethernet-phy@0 {
+					reg = <0x0>;
+				};
+
+				phy1: ethernet-phy@1 {
+					reg = <0x1>;
+				};
+			};
+
+			/* FCC1 management to switch */
+			ethernet@11300 {
+				device_type = "network";
+				compatible = "fsl,cpm2-fcc-enet";
+				reg = <0x11300 0x20 0x8400 0x100 0x11390 0x1>;
+				local-mac-address = [ 00 01 02 03 04 07 ];
+				interrupts = <32 8>;
+				interrupt-parent = <&PIC>;
+				phy-handle = <&phy0>;
+				linux,network-index = <1>;
+				fsl,cpm-command = <0x12000300>;
+			};
+
+			/* FCC2 to redundant core unit over backplane */
+			ethernet@11320 {
+				device_type = "network";
+				compatible = "fsl,cpm2-fcc-enet";
+				reg = <0x11320 0x20 0x8500 0x100 0x113b0 0x1>;
+				local-mac-address = [ 00 01 02 03 04 08 ];
+				interrupts = <33 8>;
+				interrupt-parent = <&PIC>;
+				phy-handle = <&phy1>;
+				linux,network-index = <2>;
+				fsl,cpm-command = <0x16200300>;
+			};
 		};
 
 		PIC: interrupt-controller@10c00 {
diff --git a/arch/powerpc/platforms/82xx/mgcoge.c b/arch/powerpc/platforms/82xx/mgcoge.c
index c2af169c1d1..7a5de9eb3c7 100644
--- a/arch/powerpc/platforms/82xx/mgcoge.c
+++ b/arch/powerpc/platforms/82xx/mgcoge.c
@@ -50,16 +50,63 @@ struct cpm_pin {
 static __initdata struct cpm_pin mgcoge_pins[] = {
 
 	/* SMC2 */
-	{1, 8, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
-	{1, 9, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{0, 8, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{0, 9, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
 
 	/* SCC4 */
-	{3, 25, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
-	{3, 24, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
-	{3,  9, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
-	{3,  8, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
-	{4, 22, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
-	{4, 21, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{2, 25, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{2, 24, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{2,  9, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{2,  8, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{3, 22, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{3, 21, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+
+	/* FCC1 */
+	{0, 14, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{0, 15, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{0, 16, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{0, 17, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{0, 18, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{0, 19, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{0, 20, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{0, 21, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{0, 26, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
+	{0, 27, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
+	{0, 28, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+	{0, 29, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+	{0, 30, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
+	{0, 31, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
+
+	{2, 22, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{2, 23, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+
+	/* FCC2 */
+	{1, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 20, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 21, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 22, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{1, 23, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{1, 24, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{1, 25, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{1, 26, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 27, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 29, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+	{1, 30, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{1, 31, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+
+	{2, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{2, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+
+	/* MDC */
+	{0, 13, CPM_PIN_OUTPUT | CPM_PIN_GPIO},
+
+#if defined(CONFIG_I2C_CPM)
+	/* I2C */
+	{3, 14, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_OPENDRAIN},
+	{3, 15, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_OPENDRAIN},
+#endif
 };
 
 static void __init init_ioports(void)
@@ -68,12 +115,16 @@ static void __init init_ioports(void)
 
 	for (i = 0; i < ARRAY_SIZE(mgcoge_pins); i++) {
 		const struct cpm_pin *pin = &mgcoge_pins[i];
-		cpm2_set_pin(pin->port - 1, pin->pin, pin->flags);
+		cpm2_set_pin(pin->port, pin->pin, pin->flags);
 	}
 
 	cpm2_smc_clk_setup(CPM_CLK_SMC2, CPM_BRG8);
 	cpm2_clk_setup(CPM_CLK_SCC4, CPM_CLK7, CPM_CLK_RX);
 	cpm2_clk_setup(CPM_CLK_SCC4, CPM_CLK8, CPM_CLK_TX);
+	cpm2_clk_setup(CPM_CLK_FCC1, CPM_CLK10, CPM_CLK_RX);
+	cpm2_clk_setup(CPM_CLK_FCC1, CPM_CLK9,  CPM_CLK_TX);
+	cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK13, CPM_CLK_RX);
+	cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK14, CPM_CLK_TX);
 }
 
 static void __init mgcoge_setup_arch(void)
-- 
cgit v1.2.3


From 7a626b66bbd17e775cf2210e560b29383110290e Mon Sep 17 00:00:00 2001
From: Julia Lawall <julia@diku.dk>
Date: Sun, 2 Aug 2009 10:44:53 +0200
Subject: powerpc/ipic: introduce missing kfree

Error handling code following a kzalloc should free the allocated data.

The semantic match that finds the problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@r exists@
local idexpression x;
statement S;
expression E;
identifier f,f1,l;
position p1,p2;
expression *ptr != NULL;
@@

x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...);
...
if (x == NULL) S
<... when != x
     when != if (...) { <+...x...+> }
(
x->f1 = E
|
 (x->f1 == NULL || ...)
|
 f(...,x->f1,...)
)
...>
(
 return \(0\|<+...x...+>\|ptr\);
|
 return@p2 ...;
)

@script:python@
p1 << r.p1;
p2 << r.p2;
@@

print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/sysdev/ipic.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/sysdev/ipic.c b/arch/powerpc/sysdev/ipic.c
index ebb7e584401..cb7689c4bfb 100644
--- a/arch/powerpc/sysdev/ipic.c
+++ b/arch/powerpc/sysdev/ipic.c
@@ -735,8 +735,10 @@ struct ipic * __init ipic_init(struct device_node *node, unsigned int flags)
 	ipic->irqhost = irq_alloc_host(node, IRQ_HOST_MAP_LINEAR,
 				       NR_IPIC_INTS,
 				       &ipic_host_ops, 0);
-	if (ipic->irqhost == NULL)
+	if (ipic->irqhost == NULL) {
+		kfree(ipic);
 		return NULL;
+	}
 
 	ipic->regs = ioremap(res.start, res.end - res.start + 1);
 
-- 
cgit v1.2.3


From 3475dd8a68a7c705bee88b143422ba02cb9a796b Mon Sep 17 00:00:00 2001
From: Julia Lawall <julia@diku.dk>
Date: Sat, 1 Aug 2009 10:52:51 +0200
Subject: powerpc/qe: introduce missing kfree

Error handling code following a kzalloc should free the allocated data.

The semantic match that finds the problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@r exists@
local idexpression x;
statement S;
expression E;
identifier f,f1,l;
position p1,p2;
expression *ptr != NULL;
@@

x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...);
...
if (x == NULL) S
<... when != x
     when != if (...) { <+...x...+> }
(
x->f1 = E
|
 (x->f1 == NULL || ...)
|
 f(...,x->f1,...)
)
...>
(
 return \(0\|<+...x...+>\|ptr\);
|
 return@p2 ...;
)

@script:python@
p1 << r.p1;
p2 << r.p2;
@@

print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/sysdev/qe_lib/qe_ic.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/sysdev/qe_lib/qe_ic.c b/arch/powerpc/sysdev/qe_lib/qe_ic.c
index 074905c3ee5..3faa42e03a8 100644
--- a/arch/powerpc/sysdev/qe_lib/qe_ic.c
+++ b/arch/powerpc/sysdev/qe_lib/qe_ic.c
@@ -339,8 +339,10 @@ void __init qe_ic_init(struct device_node *node, unsigned int flags,
 
 	qe_ic->irqhost = irq_alloc_host(node, IRQ_HOST_MAP_LINEAR,
 					NR_QE_IC_INTS, &qe_ic_host_ops, 0);
-	if (qe_ic->irqhost == NULL)
+	if (qe_ic->irqhost == NULL) {
+		kfree(qe_ic);
 		return;
+	}
 
 	qe_ic->regs = ioremap(res.start, res.end - res.start + 1);
 
@@ -352,6 +354,7 @@ void __init qe_ic_init(struct device_node *node, unsigned int flags,
 
 	if (qe_ic->virq_low == NO_IRQ) {
 		printk(KERN_ERR "Failed to map QE_IC low IRQ\n");
+		kfree(qe_ic);
 		return;
 	}
 
-- 
cgit v1.2.3


From fda4bd9bac78efd2f9d566c52956d297bc03e8d9 Mon Sep 17 00:00:00 2001
From: Anton Vorontsov <avorontsov@ru.mvista.com>
Date: Sat, 25 Jul 2009 01:42:17 +0400
Subject: powerpc/83xx: Add support for MPC8377E-WLAN boards

MPC8377E-WLAN are basically RDB boards except:

- RAM extended to 512 MB;
- NAND flash removed, NOR flash extended to 64 MB;
- Vitesse VSC7385 5-port switch removed, RTL8211B PHY added;
- Power management MCU removed;
- PCI slot removed, another mini-PCI slot added (IRQ routing changed);
- USB3300 PHY's ID pin grounded, thus USB port is host-only.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/boot/dts/mpc8377_wlan.dts    | 464 ++++++++++++++++++++++++++++++
 arch/powerpc/platforms/83xx/Kconfig       |   4 +-
 arch/powerpc/platforms/83xx/mpc837x_rdb.c |   5 +-
 3 files changed, 469 insertions(+), 4 deletions(-)
 create mode 100644 arch/powerpc/boot/dts/mpc8377_wlan.dts

(limited to 'arch')

diff --git a/arch/powerpc/boot/dts/mpc8377_wlan.dts b/arch/powerpc/boot/dts/mpc8377_wlan.dts
new file mode 100644
index 00000000000..3febc4e91b1
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8377_wlan.dts
@@ -0,0 +1,464 @@
+/*
+ * MPC8377E WLAN Device Tree Source
+ *
+ * Copyright 2007-2009 Freescale Semiconductor Inc.
+ * Copyright 2009 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	compatible = "fsl,mpc8377wlan";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+		pci1 = &pci1;
+		pci2 = &pci2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8377@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <32768>;
+			i-cache-size = <32768>;
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;	// 512MB at 0
+	};
+
+	localbus@e0005000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8377-elbc", "fsl,elbc", "simple-bus";
+		reg = <0xe0005000 0x1000>;
+		interrupts = <77 0x8>;
+		interrupt-parent = <&ipic>;
+		ranges = <0x0 0x0 0xfc000000 0x04000000>;
+
+		flash@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x4000000>;
+			bank-width = <2>;
+			device-width = <1>;
+
+			partition@0 {
+				reg = <0 0x8000>;
+				label = "u-boot";
+				read-only;
+			};
+
+			partition@a0000 {
+				reg = <0xa0000 0x300000>;
+				label = "kernel";
+			};
+
+			partition@3a0000 {
+				reg = <0x3a0000 0x3c60000>;
+				label = "rootfs";
+			};
+		};
+	};
+
+	immr@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "simple-bus";
+		ranges = <0x0 0xe0000000 0x00100000>;
+		reg = <0xe0000000 0x00000200>;
+		bus-frequency = <0>;
+
+		wdt@200 {
+			device_type = "watchdog";
+			compatible = "mpc83xx_wdt";
+			reg = <0x200 0x100>;
+		};
+
+		gpio1: gpio-controller@c00 {
+			#gpio-cells = <2>;
+			compatible = "fsl,mpc8377-gpio", "fsl,mpc8349-gpio";
+			reg = <0xc00 0x100>;
+			interrupts = <74 0x8>;
+			interrupt-parent = <&ipic>;
+			gpio-controller;
+		};
+
+		gpio2: gpio-controller@d00 {
+			#gpio-cells = <2>;
+			compatible = "fsl,mpc8377-gpio", "fsl,mpc8349-gpio";
+			reg = <0xd00 0x100>;
+			interrupts = <75 0x8>;
+			interrupt-parent = <&ipic>;
+			gpio-controller;
+		};
+
+		sleep-nexus {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			sleep = <&pmc 0x0c000000>;
+			ranges;
+
+			i2c@3000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <0>;
+				compatible = "fsl-i2c";
+				reg = <0x3000 0x100>;
+				interrupts = <14 0x8>;
+				interrupt-parent = <&ipic>;
+				dfsrr;
+
+				at24@50 {
+					compatible = "at24,24c256";
+					reg = <0x50>;
+				};
+
+				rtc@68 {
+					compatible = "dallas,ds1339";
+					reg = <0x68>;
+				};
+			};
+
+			sdhci@2e000 {
+				compatible = "fsl,mpc8377-esdhc", "fsl,esdhc";
+				reg = <0x2e000 0x1000>;
+				interrupts = <42 0x8>;
+				interrupt-parent = <&ipic>;
+				clock-frequency = <133333333>;
+			};
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <15 0x8>;
+			interrupt-parent = <&ipic>;
+			dfsrr;
+		};
+
+		spi@7000 {
+			cell-index = <0>;
+			compatible = "fsl,spi";
+			reg = <0x7000 0x1000>;
+			interrupts = <16 0x8>;
+			interrupt-parent = <&ipic>;
+			mode = "cpu";
+		};
+
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8377-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				cell-index = <3>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
+		usb@23000 {
+			compatible = "fsl-usb2-dr";
+			reg = <0x23000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <&ipic>;
+			interrupts = <38 0x8>;
+			phy_type = "ulpi";
+			sleep = <&pmc 0x00c00000>;
+		};
+
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <32 0x8 33 0x8 34 0x8>;
+			phy-connection-type = "mii";
+			interrupt-parent = <&ipic>;
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy2>;
+			sleep = <&pmc 0xc0000000>;
+			fsl,magic-packet;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+
+				phy2: ethernet-phy@2 {
+					interrupt-parent = <&ipic>;
+					interrupts = <17 0x8>;
+					reg = <0x2>;
+					device_type = "ethernet-phy";
+				};
+
+				phy3: ethernet-phy@3 {
+					interrupt-parent = <&ipic>;
+					interrupts = <18 0x8>;
+					reg = <0x3>;
+					device_type = "ethernet-phy";
+				};
+
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 0x8 36 0x8 37 0x8>;
+			phy-connection-type = "mii";
+			interrupt-parent = <&ipic>;
+			phy-handle = <&phy3>;
+			tbi-handle = <&tbi1>;
+			sleep = <&pmc 0x30000000>;
+			fsl,magic-packet;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <9 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <10 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
+				     "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <11 0x8>;
+			interrupt-parent = <&ipic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x9fe>;
+			fsl,descriptor-types-mask = <0x3ab0ebf>;
+			sleep = <&pmc 0x03000000>;
+		};
+
+		sata@18000 {
+			compatible = "fsl,mpc8377-sata", "fsl,pq-sata";
+			reg = <0x18000 0x1000>;
+			interrupts = <44 0x8>;
+			interrupt-parent = <&ipic>;
+			sleep = <&pmc 0x000000c0>;
+		};
+
+		sata@19000 {
+			compatible = "fsl,mpc8377-sata", "fsl,pq-sata";
+			reg = <0x19000 0x1000>;
+			interrupts = <45 0x8>;
+			interrupt-parent = <&ipic>;
+			sleep = <&pmc 0x00000030>;
+		};
+
+		/* IPIC
+		 * interrupts cell = <intr #, sense>
+		 * sense values match linux IORESOURCE_IRQ_* defines:
+		 * sense == 8: Level, low assertion
+		 * sense == 2: Edge, high-to-low change
+		 */
+		ipic: interrupt-controller@700 {
+			compatible = "fsl,ipic";
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x700 0x100>;
+		};
+
+		pmc: power@b00 {
+			compatible = "fsl,mpc8377-pmc", "fsl,mpc8349-pmc";
+			reg = <0xb00 0x100 0xa00 0x100>;
+			interrupts = <80 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+	};
+
+	pci0: pci@e0008500 {
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+				/* IRQ5 = 21 = 0x15, IRQ6 = 0x16, IRQ7 = 23 = 0x17 */
+
+				/* IDSEL AD14 IRQ6 inta */
+				 0x7000 0x0 0x0 0x1 &ipic 22 0x8
+
+				/* IDSEL AD15 IRQ5 inta */
+				 0x7800 0x0 0x0 0x1 &ipic 21 0x8>;
+		interrupt-parent = <&ipic>;
+		interrupts = <66 0x8>;
+		bus-range = <0 0>;
+		ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
+		          0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
+		          0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
+		sleep = <&pmc 0x00010000>;
+		clock-frequency = <66666666>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xe0008500 0x100		/* internal registers */
+		       0xe0008300 0x8>;		/* config space access registers */
+		compatible = "fsl,mpc8349-pci";
+		device_type = "pci";
+	};
+
+	pci1: pcie@e0009000 {
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		device_type = "pci";
+		compatible = "fsl,mpc8377-pcie", "fsl,mpc8314-pcie";
+		reg = <0xe0009000 0x00001000>;
+		ranges = <0x02000000 0 0xa8000000 0xa8000000 0 0x10000000
+		          0x01000000 0 0x00000000 0xb8000000 0 0x00800000>;
+		bus-range = <0 255>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <0 0 0 1 &ipic 1 8
+				 0 0 0 2 &ipic 1 8
+				 0 0 0 3 &ipic 1 8
+				 0 0 0 4 &ipic 1 8>;
+		sleep = <&pmc 0x00300000>;
+		clock-frequency = <0>;
+
+		pcie@0 {
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			reg = <0 0 0 0 0>;
+			ranges = <0x02000000 0 0xa8000000
+				  0x02000000 0 0xa8000000
+				  0 0x10000000
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00800000>;
+		};
+	};
+
+	pci2: pcie@e000a000 {
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		device_type = "pci";
+		compatible = "fsl,mpc8377-pcie", "fsl,mpc8314-pcie";
+		reg = <0xe000a000 0x00001000>;
+		ranges = <0x02000000 0 0xc8000000 0xc8000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xd8000000 0 0x00800000>;
+		bus-range = <0 255>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <0 0 0 1 &ipic 2 8
+				 0 0 0 2 &ipic 2 8
+				 0 0 0 3 &ipic 2 8
+				 0 0 0 4 &ipic 2 8>;
+		sleep = <&pmc 0x000c0000>;
+		clock-frequency = <0>;
+
+		pcie@0 {
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			reg = <0 0 0 0 0>;
+			ranges = <0x02000000 0 0xc8000000
+				  0x02000000 0 0xc8000000
+				  0 0x10000000
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00800000>;
+		};
+	};
+};
diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig
index 083ebee9a16..f49a2548c5f 100644
--- a/arch/powerpc/platforms/83xx/Kconfig
+++ b/arch/powerpc/platforms/83xx/Kconfig
@@ -75,11 +75,11 @@ config MPC837x_MDS
 	  This option enables support for the MPC837x MDS Processor Board.
 
 config MPC837x_RDB
-	bool "Freescale MPC837x RDB"
+	bool "Freescale MPC837x RDB/WLAN"
 	select DEFAULT_UIMAGE
 	select PPC_MPC837x
 	help
-	  This option enables support for the MPC837x RDB Board.
+	  This option enables support for the MPC837x RDB and WLAN Boards.
 
 config SBC834x
 	bool "Wind River SBC834x"
diff --git a/arch/powerpc/platforms/83xx/mpc837x_rdb.c b/arch/powerpc/platforms/83xx/mpc837x_rdb.c
index 76f3b32a155..91d19ab3a79 100644
--- a/arch/powerpc/platforms/83xx/mpc837x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc837x_rdb.c
@@ -86,11 +86,12 @@ static int __init mpc837x_rdb_probe(void)
 
 	return of_flat_dt_is_compatible(root, "fsl,mpc8377rdb") ||
 	       of_flat_dt_is_compatible(root, "fsl,mpc8378rdb") ||
-	       of_flat_dt_is_compatible(root, "fsl,mpc8379rdb");
+	       of_flat_dt_is_compatible(root, "fsl,mpc8379rdb") ||
+	       of_flat_dt_is_compatible(root, "fsl,mpc8377wlan");
 }
 
 define_machine(mpc837x_rdb) {
-	.name			= "MPC837x RDB",
+	.name			= "MPC837x RDB/WLAN",
 	.probe			= mpc837x_rdb_probe,
 	.setup_arch		= mpc837x_rdb_setup_arch,
 	.init_IRQ		= mpc837x_rdb_init_IRQ,
-- 
cgit v1.2.3


From c69328d4b93e6885c897155fbacac69a12c5faef Mon Sep 17 00:00:00 2001
From: Anton Vorontsov <avorontsov@ru.mvista.com>
Date: Thu, 9 Jul 2009 22:36:44 +0400
Subject: powerpc/85xx: Add support for I2C EEPROMs on MPC8548CDS boards

This patch simply adds four eeprom nodes to MPC8548CDS' device tree.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/boot/dts/mpc8548cds.dts | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts
index 475be1433fe..4173af387c6 100644
--- a/arch/powerpc/boot/dts/mpc8548cds.dts
+++ b/arch/powerpc/boot/dts/mpc8548cds.dts
@@ -100,6 +100,21 @@
 			interrupts = <43 2>;
 			interrupt-parent = <&mpic>;
 			dfsrr;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			eeprom@56 {
+				compatible = "atmel,24c64";
+				reg = <0x56>;
+			};
+
+			eeprom@57 {
+				compatible = "atmel,24c64";
+				reg = <0x57>;
+			};
 		};
 
 		i2c@3100 {
@@ -111,6 +126,11 @@
 			interrupts = <43 2>;
 			interrupt-parent = <&mpic>;
 			dfsrr;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
 		};
 
 		dma@21300 {
-- 
cgit v1.2.3


From 89f3729642cf33bfbc742b85e134936b562f9731 Mon Sep 17 00:00:00 2001
From: Anton Vorontsov <avorontsov@ru.mvista.com>
Date: Sat, 25 Jul 2009 01:42:30 +0400
Subject: powerpc/83xx: Add eSDHC support for MPC837xE-RDB/WLAN boards

Actually, the support is already there, but it requires newer U-Boots
(to fill-in clock-frequency, and setup pin multiplexing).

Though, it appears that on RDB boards USBB pins aren't multiplexed
between USB and eSDHC (unlike MDS boards, where USB and eSDHC share
pctl and pwrfault pins).

So, for RDB boards we can safely setup pinmux and manually fill-in
clock-frequency, thus making eSDHC work even with older u-boots.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/boot/dts/mpc8377_rdb.dts     |  2 +-
 arch/powerpc/boot/dts/mpc8378_rdb.dts     |  2 +-
 arch/powerpc/boot/dts/mpc8379_rdb.dts     |  2 +-
 arch/powerpc/platforms/83xx/mpc837x_rdb.c | 23 +++++++++++++++++++++++
 arch/powerpc/platforms/83xx/mpc83xx.h     |  4 ++++
 5 files changed, 30 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/boot/dts/mpc8377_rdb.dts b/arch/powerpc/boot/dts/mpc8377_rdb.dts
index 4f06dbc0d27..28e022ac417 100644
--- a/arch/powerpc/boot/dts/mpc8377_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8377_rdb.dts
@@ -174,7 +174,7 @@
 				interrupts = <42 0x8>;
 				interrupt-parent = <&ipic>;
 				/* Filled in by U-Boot */
-				clock-frequency = <0>;
+				clock-frequency = <111111111>;
 			};
 		};
 
diff --git a/arch/powerpc/boot/dts/mpc8378_rdb.dts b/arch/powerpc/boot/dts/mpc8378_rdb.dts
index aabf3437cad..a11ead8214b 100644
--- a/arch/powerpc/boot/dts/mpc8378_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8378_rdb.dts
@@ -174,7 +174,7 @@
 				interrupts = <42 0x8>;
 				interrupt-parent = <&ipic>;
 				/* Filled in by U-Boot */
-				clock-frequency = <0>;
+				clock-frequency = <111111111>;
 			};
 		};
 
diff --git a/arch/powerpc/boot/dts/mpc8379_rdb.dts b/arch/powerpc/boot/dts/mpc8379_rdb.dts
index 9b1da864d89..e35dfba587c 100644
--- a/arch/powerpc/boot/dts/mpc8379_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8379_rdb.dts
@@ -172,7 +172,7 @@
 				interrupts = <42 0x8>;
 				interrupt-parent = <&ipic>;
 				/* Filled in by U-Boot */
-				clock-frequency = <0>;
+				clock-frequency = <111111111>;
 			};
 		};
 
diff --git a/arch/powerpc/platforms/83xx/mpc837x_rdb.c b/arch/powerpc/platforms/83xx/mpc837x_rdb.c
index 91d19ab3a79..a1908d26124 100644
--- a/arch/powerpc/platforms/83xx/mpc837x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc837x_rdb.c
@@ -17,10 +17,32 @@
 #include <asm/time.h>
 #include <asm/ipic.h>
 #include <asm/udbg.h>
+#include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
 
 #include "mpc83xx.h"
 
+static void mpc837x_rdb_sd_cfg(void)
+{
+	void __iomem *im;
+
+	im = ioremap(get_immrbase(), 0x1000);
+	if (!im) {
+		WARN_ON(1);
+		return;
+	}
+
+	/*
+	 * On RDB boards (in contrast to MDS) USBB pins are used for SD only,
+	 * so we can safely mux them away from the USB block.
+	 */
+	clrsetbits_be32(im + MPC83XX_SICRL_OFFS, MPC837X_SICRL_USBB_MASK,
+						 MPC837X_SICRL_SD);
+	clrsetbits_be32(im + MPC83XX_SICRH_OFFS, MPC837X_SICRH_SPI_MASK,
+						 MPC837X_SICRH_SD);
+	iounmap(im);
+}
+
 /* ************************************************************************
  *
  * Setup the architecture
@@ -42,6 +64,7 @@ static void __init mpc837x_rdb_setup_arch(void)
 		mpc83xx_add_bridge(np);
 #endif
 	mpc837x_usb_cfg();
+	mpc837x_rdb_sd_cfg();
 }
 
 static struct of_device_id mpc837x_ids[] = {
diff --git a/arch/powerpc/platforms/83xx/mpc83xx.h b/arch/powerpc/platforms/83xx/mpc83xx.h
index d1dc5b0b4fb..0fea8811d45 100644
--- a/arch/powerpc/platforms/83xx/mpc83xx.h
+++ b/arch/powerpc/platforms/83xx/mpc83xx.h
@@ -30,6 +30,8 @@
 #define MPC8315_SICRL_USB_ULPI     0x00000054
 #define MPC837X_SICRL_USB_MASK     0xf0000000
 #define MPC837X_SICRL_USB_ULPI     0x50000000
+#define MPC837X_SICRL_USBB_MASK    0x30000000
+#define MPC837X_SICRL_SD           0x20000000
 
 /* system i/o configuration register high */
 #define MPC83XX_SICRH_OFFS         0x118
@@ -38,6 +40,8 @@
 #define MPC831X_SICRH_USB_ULPI     0x000000a0
 #define MPC8315_SICRH_USB_MASK     0x0000ff00
 #define MPC8315_SICRH_USB_ULPI     0x00000000
+#define MPC837X_SICRH_SPI_MASK     0x00000003
+#define MPC837X_SICRH_SD           0x00000001
 
 /* USB Control Register */
 #define FSL_USB2_CONTROL_OFFS      0x500
-- 
cgit v1.2.3


From 2eaa50e9670ecab9712317723cb7836a4da1c0dc Mon Sep 17 00:00:00 2001
From: Martyn Welch <martyn.welch@gefanuc.com>
Date: Tue, 30 Jun 2009 15:32:26 +0100
Subject: powerpc/86xx: Correct reading of information presented in cpuinfo

/proc/cpuinfo should be showing the boards revision and the revision of
the FPGA fitted. The functions currently used to access this information
as incorrect.

Additionally the VME geographical address of the PPC9A and it's status as
system contoller are available in the board registers. Show these in
cpuinfo.

Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/platforms/86xx/gef_ppc9a.c | 37 ++++++++++++++++++++++++++-------
 1 file changed, 30 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/platforms/86xx/gef_ppc9a.c b/arch/powerpc/platforms/86xx/gef_ppc9a.c
index 2efa052975e..287f7bd17dd 100644
--- a/arch/powerpc/platforms/86xx/gef_ppc9a.c
+++ b/arch/powerpc/platforms/86xx/gef_ppc9a.c
@@ -102,8 +102,8 @@ static unsigned int gef_ppc9a_get_pcb_rev(void)
 {
 	unsigned int reg;
 
-	reg = ioread32(ppc9a_regs);
-	return (reg >> 8) & 0xff;
+	reg = ioread32be(ppc9a_regs);
+	return (reg >> 16) & 0xff;
 }
 
 /* Return the board (software) revision */
@@ -111,8 +111,8 @@ static unsigned int gef_ppc9a_get_board_rev(void)
 {
 	unsigned int reg;
 
-	reg = ioread32(ppc9a_regs);
-	return (reg >> 16) & 0xff;
+	reg = ioread32be(ppc9a_regs);
+	return (reg >> 8) & 0xff;
 }
 
 /* Return the FPGA revision */
@@ -120,8 +120,26 @@ static unsigned int gef_ppc9a_get_fpga_rev(void)
 {
 	unsigned int reg;
 
-	reg = ioread32(ppc9a_regs);
-	return (reg >> 24) & 0xf;
+	reg = ioread32be(ppc9a_regs);
+	return reg & 0xf;
+}
+
+/* Return VME Geographical Address */
+static unsigned int gef_ppc9a_get_vme_geo_addr(void)
+{
+	unsigned int reg;
+
+	reg = ioread32be(ppc9a_regs + 0x4);
+	return reg & 0x1f;
+}
+
+/* Return VME System Controller Status */
+static unsigned int gef_ppc9a_get_vme_is_syscon(void)
+{
+	unsigned int reg;
+
+	reg = ioread32be(ppc9a_regs + 0x4);
+	return (reg >> 9) & 0x1;
 }
 
 static void gef_ppc9a_show_cpuinfo(struct seq_file *m)
@@ -131,10 +149,15 @@ static void gef_ppc9a_show_cpuinfo(struct seq_file *m)
 	seq_printf(m, "Vendor\t\t: GE Fanuc Intelligent Platforms\n");
 
 	seq_printf(m, "Revision\t: %u%c\n", gef_ppc9a_get_pcb_rev(),
-		('A' + gef_ppc9a_get_board_rev() - 1));
+		('A' + gef_ppc9a_get_board_rev()));
 	seq_printf(m, "FPGA Revision\t: %u\n", gef_ppc9a_get_fpga_rev());
 
 	seq_printf(m, "SVR\t\t: 0x%x\n", svid);
+
+	seq_printf(m, "VME geo. addr\t: %u\n", gef_ppc9a_get_vme_geo_addr());
+
+	seq_printf(m, "VME syscon\t: %s\n",
+		gef_ppc9a_get_vme_is_syscon() ? "yes" : "no");
 }
 
 static void __init gef_ppc9a_nec_fixup(struct pci_dev *pdev)
-- 
cgit v1.2.3


From 8798b9df26bbc7f3cee686483a0bac68b666bf8f Mon Sep 17 00:00:00 2001
From: Martyn Welch <martyn.welch@gefanuc.com>
Date: Tue, 30 Jun 2009 15:32:38 +0100
Subject: powerpc/86xx: Enable XMC site on GE Fanuc SBC310

This patch enables the XMC (PCIe daughter card) site on the SBC310.
STG enter the description for the patch above.

Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/boot/dts/gef_sbc310.dts | 37 ++++++++++++++++++++++++++++++++++++
 1 file changed, 37 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/boot/dts/gef_sbc310.dts b/arch/powerpc/boot/dts/gef_sbc310.dts
index 0f4c9ec2c3a..7810ea99554 100644
--- a/arch/powerpc/boot/dts/gef_sbc310.dts
+++ b/arch/powerpc/boot/dts/gef_sbc310.dts
@@ -376,4 +376,41 @@
 				  0x0 0x00400000>;
 		};
 	};
+
+	pci1: pcie@fef09000 {
+		compatible = "fsl,mpc8641-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xfef09000 0x1000>;
+		bus-range = <0x0 0xff>;
+		ranges = <0x02000000 0x0 0xc0000000 0xc0000000 0x0 0x20000000
+			  0x01000000 0x0 0x00000000 0xfe400000 0x0 0x00400000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <0x19 0x2>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+			0x0000 0x0 0x0 0x1 &mpic 0x4 0x2
+			0x0000 0x0 0x0 0x2 &mpic 0x5 0x2
+			0x0000 0x0 0x0 0x3 &mpic 0x6 0x2
+			0x0000 0x0 0x0 0x4 &mpic 0x7 0x2
+			>;
+
+		pcie@0 {
+			reg = <0 0 0 0 0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x02000000 0x0 0xc0000000
+				  0x02000000 0x0 0xc0000000
+				  0x0 0x20000000
+
+				  0x01000000 0x0 0x00000000
+				  0x01000000 0x0 0x00000000
+				  0x0 0x00400000>;
+		};
+	};
+
 };
-- 
cgit v1.2.3


From 433abcdf321322495d83c8b571bdf7134622c734 Mon Sep 17 00:00:00 2001
From: Martyn Welch <martyn.welch@gefanuc.com>
Date: Wed, 29 Jul 2009 22:13:45 +0000
Subject: powerpc/86xx: Update GE Fanuc sbc310 DTS

Update GE Fanuc DTS to match the alterations suggested during the merge of
the ppc9a DTS in commit 740d36ae6344f38c4da64c2ede765d7d2dd1f132

Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/boot/dts/gef_sbc310.dts | 29 +++++++++++++----------------
 1 file changed, 13 insertions(+), 16 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/boot/dts/gef_sbc310.dts b/arch/powerpc/boot/dts/gef_sbc310.dts
index 7810ea99554..2107d3c7cfe 100644
--- a/arch/powerpc/boot/dts/gef_sbc310.dts
+++ b/arch/powerpc/boot/dts/gef_sbc310.dts
@@ -83,34 +83,34 @@
 
 		/* flash@0,0 is a mirror of part of the memory in flash@1,0
 		flash@0,0 {
-			compatible = "cfi-flash";
-			reg = <0 0 0x01000000>;
+			compatible = "gef,sbc310-firmware-mirror", "cfi-flash";
+			reg = <0x0 0x0 0x01000000>;
 			bank-width = <2>;
 			device-width = <2>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			partition@0 {
 				label = "firmware";
-				reg = <0x00000000 0x01000000>;
+				reg = <0x0 0x01000000>;
 				read-only;
 			};
 		};
 		*/
 
 		flash@1,0 {
-			compatible = "cfi-flash";
-			reg = <1 0 0x8000000>;
+			compatible = "gef,sbc310-paged-flash", "cfi-flash";
+			reg = <0x1 0x0 0x8000000>;
 			bank-width = <2>;
 			device-width = <2>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			partition@0 {
 				label = "user";
-				reg = <0x00000000 0x07800000>;
+				reg = <0x0 0x7800000>;
 			};
 			partition@7800000 {
 				label = "firmware";
-				reg = <0x07800000 0x00800000>;
+				reg = <0x7800000 0x800000>;
 				read-only;
 			};
 		};
@@ -121,18 +121,16 @@
 		};
 
 		wdt@4,2000 {
-			#interrupt-cells = <2>;
-			device_type = "watchdog";
-			compatible = "gef,fpga-wdt";
+			compatible = "gef,sbc310-fpga-wdt", "gef,fpga-wdt-1.00",
+				"gef,fpga-wdt";
 			reg = <0x4 0x2000 0x8>;
 			interrupts = <0x1a 0x4>;
 			interrupt-parent = <&gef_pic>;
 		};
 /*
 		wdt@4,2010 {
-			#interrupt-cells = <2>;
-			device_type = "watchdog";
-			compatible = "gef,fpga-wdt";
+			compatible = "gef,sbc310-fpga-wdt", "gef,fpga-wdt-1.00",
+				"gef,fpga-wdt";
 			reg = <0x4 0x2010 0x8>;
 			interrupts = <0x1b 0x4>;
 			interrupt-parent = <&gef_pic>;
@@ -141,7 +139,7 @@
 		gef_pic: pic@4,4000 {
 			#interrupt-cells = <1>;
 			interrupt-controller;
-			compatible = "gef,fpga-pic";
+			compatible = "gef,sbc310-fpga-pic", "gef,fpga-pic";
 			reg = <0x4 0x4000 0x20>;
 			interrupts = <0x8
 				      0x9>;
@@ -161,7 +159,7 @@
 		#size-cells = <1>;
 		#interrupt-cells = <2>;
 		device_type = "soc";
-		compatible = "simple-bus";
+		compatible = "fsl,mpc8641-soc", "simple-bus";
 		ranges = <0x0 0xfef00000 0x00100000>;
 		bus-frequency = <33333333>;
 
@@ -412,5 +410,4 @@
 				  0x0 0x00400000>;
 		};
 	};
-
 };
-- 
cgit v1.2.3


From 797a747a82e23530ee45d2927bf84f3571c1acb2 Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@kernel.crashing.org>
Date: Tue, 18 Aug 2009 15:21:40 +0000
Subject: powerpc/mm: Fix assert_pte_locked to work properly on uniprocessor

Since the pte_lockptr is a spinlock it gets optimized away on
uniprocessor builds so using spin_is_locked is not correct.  We can use
assert_spin_locked instead and get the proper behavior between UP and
SMP builds.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/mm/pgtable.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/mm/pgtable.c b/arch/powerpc/mm/pgtable.c
index cafb2a26954..b6b32487e74 100644
--- a/arch/powerpc/mm/pgtable.c
+++ b/arch/powerpc/mm/pgtable.c
@@ -254,7 +254,7 @@ void assert_pte_locked(struct mm_struct *mm, unsigned long addr)
 	BUG_ON(pud_none(*pud));
 	pmd = pmd_offset(pud, addr);
 	BUG_ON(!pmd_present(*pmd));
-	BUG_ON(!spin_is_locked(pte_lockptr(mm, pmd)));
+	assert_spin_locked(pte_lockptr(mm, pmd));
 }
 #endif /* CONFIG_DEBUG_VM */
 
-- 
cgit v1.2.3


From ae142e0c52b38e44d28b12f77c6e7faa96f7a069 Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@lst.de>
Date: Fri, 12 Jun 2009 04:31:52 +0000
Subject: powerpc/sputrace: Use the generic event tracer

I wrote sputrace before generic tracing infrastrucure was available.
Now that we have the generic event tracer we can convert it over and
remove a lot of code:

  8 files changed, 45 insertions(+), 285 deletions(-)

To use it make sure CONFIG_EVENT_TRACING is enabled and then enable
the spufs trace channel by

  echo 1 > /sys/kernel/debug/tracing/events/spufs/spufs_context/enable

and then read the trace records using e.g.

  cat /sys/kernel/debug/tracing/trace

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/platforms/cell/Kconfig          |   7 -
 arch/powerpc/platforms/cell/spufs/Makefile   |   3 +-
 arch/powerpc/platforms/cell/spufs/context.c  |   1 +
 arch/powerpc/platforms/cell/spufs/file.c     |   1 +
 arch/powerpc/platforms/cell/spufs/sched.c    |   2 +
 arch/powerpc/platforms/cell/spufs/spufs.h    |   5 -
 arch/powerpc/platforms/cell/spufs/sputrace.c | 272 ---------------------------
 arch/powerpc/platforms/cell/spufs/sputrace.h |  39 ++++
 8 files changed, 45 insertions(+), 285 deletions(-)
 delete mode 100644 arch/powerpc/platforms/cell/spufs/sputrace.c
 create mode 100644 arch/powerpc/platforms/cell/spufs/sputrace.h

(limited to 'arch')

diff --git a/arch/powerpc/platforms/cell/Kconfig b/arch/powerpc/platforms/cell/Kconfig
index 50f17bdd3c1..48cd7d2e1b7 100644
--- a/arch/powerpc/platforms/cell/Kconfig
+++ b/arch/powerpc/platforms/cell/Kconfig
@@ -80,13 +80,6 @@ config SPU_FS_64K_LS
 	  uses 4K pages. This can improve performances of applications
 	  using multiple SPEs by lowering the TLB pressure on them.
 
-config SPU_TRACE
-	tristate "SPU event tracing support"
-	depends on SPU_FS && MARKERS
-	help
-	  This option allows reading a trace of spu-related events through
-	  the sputrace file in procfs.
-
 config SPU_BASE
 	bool
 	default n
diff --git a/arch/powerpc/platforms/cell/spufs/Makefile b/arch/powerpc/platforms/cell/spufs/Makefile
index 99610a6361f..b93f877ba50 100644
--- a/arch/powerpc/platforms/cell/spufs/Makefile
+++ b/arch/powerpc/platforms/cell/spufs/Makefile
@@ -4,7 +4,8 @@ spufs-y += inode.o file.o context.o syscalls.o coredump.o
 spufs-y += sched.o backing_ops.o hw_ops.o run.o gang.o
 spufs-y += switch.o fault.o lscsa_alloc.o
 
-obj-$(CONFIG_SPU_TRACE)	+= sputrace.o
+# magic for the trace events
+CFLAGS_sched.o := -I$(src)
 
 # Rules to build switch.o with the help of SPU tool chain
 SPU_CROSS	:= spu-
diff --git a/arch/powerpc/platforms/cell/spufs/context.c b/arch/powerpc/platforms/cell/spufs/context.c
index db5398c0339..0c87bcd2452 100644
--- a/arch/powerpc/platforms/cell/spufs/context.c
+++ b/arch/powerpc/platforms/cell/spufs/context.c
@@ -28,6 +28,7 @@
 #include <asm/spu.h>
 #include <asm/spu_csa.h>
 #include "spufs.h"
+#include "sputrace.h"
 
 
 atomic_t nr_spu_contexts = ATOMIC_INIT(0);
diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c
index d6a519e6e1c..ab8aef9bb8e 100644
--- a/arch/powerpc/platforms/cell/spufs/file.c
+++ b/arch/powerpc/platforms/cell/spufs/file.c
@@ -38,6 +38,7 @@
 #include <asm/uaccess.h>
 
 #include "spufs.h"
+#include "sputrace.h"
 
 #define SPUFS_MMAP_4K (PAGE_SIZE == 0x1000)
 
diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c
index f085369301b..bb5b77c66d0 100644
--- a/arch/powerpc/platforms/cell/spufs/sched.c
+++ b/arch/powerpc/platforms/cell/spufs/sched.c
@@ -47,6 +47,8 @@
 #include <asm/spu_csa.h>
 #include <asm/spu_priv1.h>
 #include "spufs.h"
+#define CREATE_TRACE_POINTS
+#include "sputrace.h"
 
 struct spu_prio_array {
 	DECLARE_BITMAP(bitmap, MAX_PRIO);
diff --git a/arch/powerpc/platforms/cell/spufs/spufs.h b/arch/powerpc/platforms/cell/spufs/spufs.h
index ae31573bea4..c448bac6551 100644
--- a/arch/powerpc/platforms/cell/spufs/spufs.h
+++ b/arch/powerpc/platforms/cell/spufs/spufs.h
@@ -373,9 +373,4 @@ extern void spu_free_lscsa(struct spu_state *csa);
 extern void spuctx_switch_state(struct spu_context *ctx,
 		enum spu_utilization_state new_state);
 
-#define spu_context_trace(name, ctx, spu) \
-	trace_mark(name, "ctx %p spu %p", ctx, spu);
-#define spu_context_nospu_trace(name, ctx) \
-	trace_mark(name, "ctx %p", ctx);
-
 #endif
diff --git a/arch/powerpc/platforms/cell/spufs/sputrace.c b/arch/powerpc/platforms/cell/spufs/sputrace.c
deleted file mode 100644
index d0b1f3f4d9c..00000000000
--- a/arch/powerpc/platforms/cell/spufs/sputrace.c
+++ /dev/null
@@ -1,272 +0,0 @@
-/*
- * Copyright (C) 2007 IBM Deutschland Entwicklung GmbH
- *	Released under GPL v2.
- *
- * Partially based on net/ipv4/tcp_probe.c.
- *
- * Simple tracing facility for spu contexts.
- */
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/marker.h>
-#include <linux/proc_fs.h>
-#include <linux/wait.h>
-#include <asm/atomic.h>
-#include <asm/uaccess.h>
-#include "spufs.h"
-
-struct spu_probe {
-	const char *name;
-	const char *format;
-	marker_probe_func *probe_func;
-};
-
-struct sputrace {
-	ktime_t tstamp;
-	int owner_tid; /* owner */
-	int curr_tid;
-	const char *name;
-	int number;
-};
-
-static int bufsize __read_mostly = 16384;
-MODULE_PARM_DESC(bufsize, "Log buffer size (number of records)");
-module_param(bufsize, int, 0);
-
-
-static DEFINE_SPINLOCK(sputrace_lock);
-static DECLARE_WAIT_QUEUE_HEAD(sputrace_wait);
-static ktime_t sputrace_start;
-static unsigned long sputrace_head, sputrace_tail;
-static struct sputrace *sputrace_log;
-static int sputrace_logging;
-
-static int sputrace_used(void)
-{
-	return (sputrace_head - sputrace_tail) % bufsize;
-}
-
-static inline int sputrace_avail(void)
-{
-	return bufsize - sputrace_used();
-}
-
-static int sputrace_sprint(char *tbuf, int n)
-{
-	const struct sputrace *t = sputrace_log + sputrace_tail % bufsize;
-	struct timespec tv =
-		ktime_to_timespec(ktime_sub(t->tstamp, sputrace_start));
-
-	return snprintf(tbuf, n,
-		"[%lu.%09lu] %d: %s (ctxthread = %d, spu = %d)\n",
-		(unsigned long) tv.tv_sec,
-		(unsigned long) tv.tv_nsec,
-		t->curr_tid,
-		t->name,
-		t->owner_tid,
-		t->number);
-}
-
-static ssize_t sputrace_read(struct file *file, char __user *buf,
-		size_t len, loff_t *ppos)
-{
-	int error = 0, cnt = 0;
-
-	if (!buf || len < 0)
-		return -EINVAL;
-
-	while (cnt < len) {
-		char tbuf[128];
-		int width;
-
-		/* If we have data ready to return, don't block waiting
-		 * for more */
-		if (cnt > 0 && sputrace_used() == 0)
-			break;
-
-		error = wait_event_interruptible(sputrace_wait,
-						 sputrace_used() > 0);
-		if (error)
-			break;
-
-		spin_lock(&sputrace_lock);
-		if (sputrace_head == sputrace_tail) {
-			spin_unlock(&sputrace_lock);
-			continue;
-		}
-
-		width = sputrace_sprint(tbuf, sizeof(tbuf));
-		if (width < len)
-			sputrace_tail = (sputrace_tail + 1) % bufsize;
-		spin_unlock(&sputrace_lock);
-
-		if (width >= len)
-			break;
-
-		error = copy_to_user(buf + cnt, tbuf, width);
-		if (error)
-			break;
-		cnt += width;
-	}
-
-	return cnt == 0 ? error : cnt;
-}
-
-static int sputrace_open(struct inode *inode, struct file *file)
-{
-	int rc;
-
-	spin_lock(&sputrace_lock);
-	if (sputrace_logging) {
-		rc = -EBUSY;
-		goto out;
-	}
-
-	sputrace_logging = 1;
-	sputrace_head = sputrace_tail = 0;
-	sputrace_start = ktime_get();
-	rc = 0;
-
-out:
-	spin_unlock(&sputrace_lock);
-	return rc;
-}
-
-static int sputrace_release(struct inode *inode, struct file *file)
-{
-	spin_lock(&sputrace_lock);
-	sputrace_logging = 0;
-	spin_unlock(&sputrace_lock);
-	return 0;
-}
-
-static const struct file_operations sputrace_fops = {
-	.owner   = THIS_MODULE,
-	.open    = sputrace_open,
-	.read    = sputrace_read,
-	.release = sputrace_release,
-};
-
-static void sputrace_log_item(const char *name, struct spu_context *ctx,
-		struct spu *spu)
-{
-	spin_lock(&sputrace_lock);
-
-	if (!sputrace_logging) {
-		spin_unlock(&sputrace_lock);
-		return;
-	}
-
-	if (sputrace_avail() > 1) {
-		struct sputrace *t = sputrace_log + sputrace_head;
-
-		t->tstamp = ktime_get();
-		t->owner_tid = ctx->tid;
-		t->name = name;
-		t->curr_tid = current->pid;
-		t->number = spu ? spu->number : -1;
-
-		sputrace_head = (sputrace_head + 1) % bufsize;
-	} else {
-		printk(KERN_WARNING
-		       "sputrace: lost samples due to full buffer.\n");
-	}
-	spin_unlock(&sputrace_lock);
-
-	wake_up(&sputrace_wait);
-}
-
-static void spu_context_event(void *probe_private, void *call_data,
-		const char *format, va_list *args)
-{
-	struct spu_probe *p = probe_private;
-	struct spu_context *ctx;
-	struct spu *spu;
-
-	ctx = va_arg(*args, struct spu_context *);
-	spu = va_arg(*args, struct spu *);
-
-	sputrace_log_item(p->name, ctx, spu);
-}
-
-static void spu_context_nospu_event(void *probe_private, void *call_data,
-		const char *format, va_list *args)
-{
-	struct spu_probe *p = probe_private;
-	struct spu_context *ctx;
-
-	ctx = va_arg(*args, struct spu_context *);
-
-	sputrace_log_item(p->name, ctx, NULL);
-}
-
-struct spu_probe spu_probes[] = {
-	{ "spu_bind_context__enter", "ctx %p spu %p", spu_context_event },
-	{ "spu_unbind_context__enter", "ctx %p spu %p", spu_context_event },
-	{ "spu_get_idle__enter", "ctx %p", spu_context_nospu_event },
-	{ "spu_get_idle__found", "ctx %p spu %p", spu_context_event },
-	{ "spu_get_idle__not_found", "ctx %p", spu_context_nospu_event },
-	{ "spu_find_victim__enter", "ctx %p", spu_context_nospu_event },
-	{ "spusched_tick__preempt", "ctx %p spu %p", spu_context_event },
-	{ "spusched_tick__newslice", "ctx %p", spu_context_nospu_event },
-	{ "spu_yield__enter", "ctx %p", spu_context_nospu_event },
-	{ "spu_deactivate__enter", "ctx %p", spu_context_nospu_event },
-	{ "__spu_deactivate__unload", "ctx %p spu %p", spu_context_event },
-	{ "spufs_ps_fault__enter", "ctx %p", spu_context_nospu_event },
-	{ "spufs_ps_fault__sleep", "ctx %p", spu_context_nospu_event },
-	{ "spufs_ps_fault__wake", "ctx %p spu %p", spu_context_event },
-	{ "spufs_ps_fault__insert", "ctx %p spu %p", spu_context_event },
-	{ "spu_acquire_saved__enter", "ctx %p", spu_context_nospu_event },
-	{ "destroy_spu_context__enter", "ctx %p", spu_context_nospu_event },
-	{ "spufs_stop_callback__enter", "ctx %p spu %p", spu_context_event },
-};
-
-static int __init sputrace_init(void)
-{
-	struct proc_dir_entry *entry;
-	int i, error = -ENOMEM;
-
-	sputrace_log = kcalloc(bufsize, sizeof(struct sputrace), GFP_KERNEL);
-	if (!sputrace_log)
-		goto out;
-
-	entry = proc_create("sputrace", S_IRUSR, NULL, &sputrace_fops);
-	if (!entry)
-		goto out_free_log;
-
-	for (i = 0; i < ARRAY_SIZE(spu_probes); i++) {
-		struct spu_probe *p = &spu_probes[i];
-
-		error = marker_probe_register(p->name, p->format,
-					      p->probe_func, p);
-		if (error)
-			printk(KERN_INFO "Unable to register probe %s\n",
-					p->name);
-	}
-
-	return 0;
-
-out_free_log:
-	kfree(sputrace_log);
-out:
-	return -ENOMEM;
-}
-
-static void __exit sputrace_exit(void)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(spu_probes); i++)
-		marker_probe_unregister(spu_probes[i].name,
-			spu_probes[i].probe_func, &spu_probes[i]);
-
-	remove_proc_entry("sputrace", NULL);
-	kfree(sputrace_log);
-	marker_synchronize_unregister();
-}
-
-module_init(sputrace_init);
-module_exit(sputrace_exit);
-
-MODULE_LICENSE("GPL");
diff --git a/arch/powerpc/platforms/cell/spufs/sputrace.h b/arch/powerpc/platforms/cell/spufs/sputrace.h
new file mode 100644
index 00000000000..db2656aa410
--- /dev/null
+++ b/arch/powerpc/platforms/cell/spufs/sputrace.h
@@ -0,0 +1,39 @@
+#if !defined(_TRACE_SPUFS_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_SPUFS_H
+
+#include <linux/tracepoint.h>
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM spufs
+
+TRACE_EVENT(spufs_context,
+	TP_PROTO(struct spu_context *ctx, struct spu *spu, const char *name),
+	TP_ARGS(ctx, spu, name),
+
+	TP_STRUCT__entry(
+		__field(const char *, name)
+		__field(int, owner_tid)
+		__field(int, number)
+	),
+
+	TP_fast_assign(
+		__entry->name = name;
+		__entry->owner_tid = ctx->tid;
+		__entry->number = spu ? spu->number : -1;
+	),
+
+	TP_printk("%s (ctxthread = %d, spu = %d)",
+		__entry->name, __entry->owner_tid, __entry->number)
+);
+
+#define spu_context_trace(name, ctx, spu) \
+	trace_spufs_context(ctx, spu, __stringify(name))
+#define spu_context_nospu_trace(name, ctx) \
+	trace_spufs_context(ctx, NULL, __stringify(name))
+
+#endif /* _TRACE_SPUFS_H */
+
+#undef TRACE_INCLUDE_PATH
+#define TRACE_INCLUDE_PATH .
+#define TRACE_INCLUDE_FILE sputrace
+#include <trace/define_trace.h>
-- 
cgit v1.2.3


From 690a2d074ead1867ca5a1976284ca1c89ebc04c6 Mon Sep 17 00:00:00 2001
From: Martyn Welch <martyn.welch@gefanuc.com>
Date: Thu, 2 Jul 2009 06:12:18 +0000
Subject: powerpc/nvram: Allow byte length reads from mmio NVRAM driver

Add a byte length read and write interface compatible with the
nvram_generic driver interface to the mmio driver.

Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/sysdev/mmio_nvram.c | 32 ++++++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/sysdev/mmio_nvram.c b/arch/powerpc/sysdev/mmio_nvram.c
index 7b49633a4bd..20732420906 100644
--- a/arch/powerpc/sysdev/mmio_nvram.c
+++ b/arch/powerpc/sysdev/mmio_nvram.c
@@ -53,6 +53,23 @@ static ssize_t mmio_nvram_read(char *buf, size_t count, loff_t *index)
 	return count;
 }
 
+static unsigned char mmio_nvram_read_val(int addr)
+{
+	unsigned long flags;
+	unsigned char val;
+
+	if (addr >= mmio_nvram_len)
+		return 0xff;
+
+	spin_lock_irqsave(&mmio_nvram_lock, flags);
+
+	val = ioread8(mmio_nvram_start + addr);
+
+	spin_unlock_irqrestore(&mmio_nvram_lock, flags);
+
+	return val;
+}
+
 static ssize_t mmio_nvram_write(char *buf, size_t count, loff_t *index)
 {
 	unsigned long flags;
@@ -72,6 +89,19 @@ static ssize_t mmio_nvram_write(char *buf, size_t count, loff_t *index)
 	return count;
 }
 
+void mmio_nvram_write_val(int addr, unsigned char val)
+{
+	unsigned long flags;
+
+	if (addr < mmio_nvram_len) {
+		spin_lock_irqsave(&mmio_nvram_lock, flags);
+
+		iowrite8(val, mmio_nvram_start + addr);
+
+		spin_unlock_irqrestore(&mmio_nvram_lock, flags);
+	}
+}
+
 static ssize_t mmio_nvram_get_size(void)
 {
 	return mmio_nvram_len;
@@ -114,6 +144,8 @@ int __init mmio_nvram_init(void)
 	printk(KERN_INFO "mmio NVRAM, %luk at 0x%lx mapped to %p\n",
 	       mmio_nvram_len >> 10, nvram_addr, mmio_nvram_start);
 
+	ppc_md.nvram_read_val	= mmio_nvram_read_val;
+	ppc_md.nvram_write_val	= mmio_nvram_write_val;
 	ppc_md.nvram_read	= mmio_nvram_read;
 	ppc_md.nvram_write	= mmio_nvram_write;
 	ppc_md.nvram_size	= mmio_nvram_get_size;
-- 
cgit v1.2.3


From a888ad451a96881a7e40f40f717d05f1f3b26ad4 Mon Sep 17 00:00:00 2001
From: Stoyan Gaydarov <sgayda2@uiuc.edu>
Date: Tue, 21 Jul 2009 17:02:31 +0000
Subject: powerpc: ARRAY_SIZE changes in pasemi and powermac code

These changes were a direct result of using a semantic patch
More information can be found at http://www.emn.fr/x-info/coccinelle/

Signed-off-by: Stoyan Gaydarov <sgayda2@uiuc.edu>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/platforms/pasemi/idle.c      | 2 +-
 arch/powerpc/platforms/powermac/feature.c | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/platforms/pasemi/idle.c b/arch/powerpc/platforms/pasemi/idle.c
index 43911d8b020..75b296bc51a 100644
--- a/arch/powerpc/platforms/pasemi/idle.c
+++ b/arch/powerpc/platforms/pasemi/idle.c
@@ -90,7 +90,7 @@ machine_late_initcall(pasemi, pasemi_idle_init);
 static int __init idle_param(char *p)
 {
 	int i;
-	for (i = 0; i < sizeof(modes)/sizeof(struct sleep_mode); i++) {
+	for (i = 0; i < ARRAY_SIZE(modes); i++) {
 		if (!strcmp(modes[i].name, p)) {
 			current_mode = i;
 			break;
diff --git a/arch/powerpc/platforms/powermac/feature.c b/arch/powerpc/platforms/powermac/feature.c
index e6c0040ee79..095de3227d8 100644
--- a/arch/powerpc/platforms/powermac/feature.c
+++ b/arch/powerpc/platforms/powermac/feature.c
@@ -2419,13 +2419,13 @@ static int __init probe_motherboard(void)
 	dt = of_find_node_by_name(NULL, "device-tree");
 	if (dt != NULL)
 		model = of_get_property(dt, "model", NULL);
-	for(i=0; model && i<(sizeof(pmac_mb_defs)/sizeof(struct pmac_mb_def)); i++) {
+	for(i=0; model && i<ARRAY_SIZE(pmac_mb_defs); i++) {
 	    if (strcmp(model, pmac_mb_defs[i].model_string) == 0) {
 		pmac_mb = pmac_mb_defs[i];
 		goto found;
 	    }
 	}
-	for(i=0; i<(sizeof(pmac_mb_defs)/sizeof(struct pmac_mb_def)); i++) {
+	for(i=0; i<ARRAY_SIZE(pmac_mb_defs); i++) {
 	    if (machine_is_compatible(pmac_mb_defs[i].model_string)) {
 		pmac_mb = pmac_mb_defs[i];
 		goto found;
-- 
cgit v1.2.3


From cf68787b68a2011664f1670a827c8f202ddb7c3d Mon Sep 17 00:00:00 2001
From: Benjamin Krill <ben@codiert.org>
Date: Mon, 27 Jul 2009 22:02:39 +0000
Subject: powerpc/prom_init: Evaluate mem kernel parameter for early allocation

Evaluate mem kernel parameter for early memory allocations. If mem is set
no allocation in the region above the given boundary is allowed. The current
code doesn't take care about this and allocate memory above the given mem
boundary.

Signed-off-by: Benjamin Krill <ben@codiert.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/prom_init.c | 103 +++++++++++++++++++++++++++++++++++++++-
 1 file changed, 101 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index d942404779c..864334b337a 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -190,6 +190,8 @@ static int __initdata of_platform;
 
 static char __initdata prom_cmd_line[COMMAND_LINE_SIZE];
 
+static unsigned long __initdata prom_memory_limit;
+
 static unsigned long __initdata alloc_top;
 static unsigned long __initdata alloc_top_high;
 static unsigned long __initdata alloc_bottom;
@@ -484,6 +486,67 @@ static int __init prom_setprop(phandle node, const char *nodename,
 	return call_prom("interpret", 1, 1, (u32)(unsigned long) cmd);
 }
 
+/* We can't use the standard versions because of RELOC headaches. */
+#define isxdigit(c)	(('0' <= (c) && (c) <= '9') \
+			 || ('a' <= (c) && (c) <= 'f') \
+			 || ('A' <= (c) && (c) <= 'F'))
+
+#define isdigit(c)	('0' <= (c) && (c) <= '9')
+#define islower(c)	('a' <= (c) && (c) <= 'z')
+#define toupper(c)	(islower(c) ? ((c) - 'a' + 'A') : (c))
+
+unsigned long prom_strtoul(const char *cp, const char **endp)
+{
+	unsigned long result = 0, base = 10, value;
+
+	if (*cp == '0') {
+		base = 8;
+		cp++;
+		if (toupper(*cp) == 'X') {
+			cp++;
+			base = 16;
+		}
+	}
+
+	while (isxdigit(*cp) &&
+	       (value = isdigit(*cp) ? *cp - '0' : toupper(*cp) - 'A' + 10) < base) {
+		result = result * base + value;
+		cp++;
+	}
+
+	if (endp)
+		*endp = cp;
+
+	return result;
+}
+
+unsigned long prom_memparse(const char *ptr, const char **retptr)
+{
+	unsigned long ret = prom_strtoul(ptr, retptr);
+	int shift = 0;
+
+	/*
+	 * We can't use a switch here because GCC *may* generate a
+	 * jump table which won't work, because we're not running at
+	 * the address we're linked at.
+	 */
+	if ('G' == **retptr || 'g' == **retptr)
+		shift = 30;
+
+	if ('M' == **retptr || 'm' == **retptr)
+		shift = 20;
+
+	if ('K' == **retptr || 'k' == **retptr)
+		shift = 10;
+
+	if (shift) {
+		ret <<= shift;
+		(*retptr)++;
+	}
+
+	return ret;
+}
+
 /*
  * Early parsing of the command line passed to the kernel, used for
  * "mem=x" and the options that affect the iommu
@@ -491,9 +554,8 @@ static int __init prom_setprop(phandle node, const char *nodename,
 static void __init early_cmdline_parse(void)
 {
 	struct prom_t *_prom = &RELOC(prom);
-#ifdef CONFIG_PPC64
 	const char *opt;
-#endif
+
 	char *p;
 	int l = 0;
 
@@ -521,6 +583,15 @@ static void __init early_cmdline_parse(void)
 			RELOC(prom_iommu_force_on) = 1;
 	}
 #endif
+	opt = strstr(RELOC(prom_cmd_line), RELOC("mem="));
+	if (opt) {
+		opt += 4;
+		RELOC(prom_memory_limit) = prom_memparse(opt, (const char **)&opt);
+#ifdef CONFIG_PPC64
+		/* Align to 16 MB == size of ppc64 large page */
+		RELOC(prom_memory_limit) = ALIGN(RELOC(prom_memory_limit), 0x1000000);
+#endif
+	}
 }
 
 #ifdef CONFIG_PPC_PSERIES
@@ -1026,6 +1097,29 @@ static void __init prom_init_mem(void)
 			RELOC(alloc_bottom) = PAGE_ALIGN(RELOC(prom_initrd_end));
 	}
 
+	/*
+	 * If prom_memory_limit is set we reduce the upper limits *except* for
+	 * alloc_top_high. This must be the real top of RAM so we can put
+	 * TCE's up there.
+	 */
+
+	RELOC(alloc_top_high) = RELOC(ram_top);
+
+	if (RELOC(prom_memory_limit)) {
+		if (RELOC(prom_memory_limit) <= RELOC(alloc_bottom)) {
+			prom_printf("Ignoring mem=%x <= alloc_bottom.\n",
+				RELOC(prom_memory_limit));
+			RELOC(prom_memory_limit) = 0;
+		} else if (RELOC(prom_memory_limit) >= RELOC(ram_top)) {
+			prom_printf("Ignoring mem=%x >= ram_top.\n",
+				RELOC(prom_memory_limit));
+			RELOC(prom_memory_limit) = 0;
+		} else {
+			RELOC(ram_top) = RELOC(prom_memory_limit);
+			RELOC(rmo_top) = min(RELOC(rmo_top), RELOC(prom_memory_limit));
+		}
+	}
+
 	/*
 	 * Setup our top alloc point, that is top of RMO or top of
 	 * segment 0 when running non-LPAR.
@@ -1041,6 +1135,7 @@ static void __init prom_init_mem(void)
 	RELOC(alloc_top_high) = RELOC(ram_top);
 
 	prom_printf("memory layout at init:\n");
+	prom_printf("  memory_limit : %x (16 MB aligned)\n", RELOC(prom_memory_limit));
 	prom_printf("  alloc_bottom : %x\n", RELOC(alloc_bottom));
 	prom_printf("  alloc_top    : %x\n", RELOC(alloc_top));
 	prom_printf("  alloc_top_hi : %x\n", RELOC(alloc_top_high));
@@ -2395,6 +2490,10 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4,
 	/*
 	 * Fill in some infos for use by the kernel later on
 	 */
+	if (RELOC(prom_memory_limit))
+		prom_setprop(_prom->chosen, "/chosen", "linux,memory-limit",
+			     &RELOC(prom_memory_limit),
+			     sizeof(prom_memory_limit));
 #ifdef CONFIG_PPC64
 	if (RELOC(prom_iommu_off))
 		prom_setprop(_prom->chosen, "/chosen", "linux,iommu-off",
-- 
cgit v1.2.3


From 02a606c2c47a2e4714225d0c3513ca03679f01d2 Mon Sep 17 00:00:00 2001
From: roel kluin <roel.kluin@gmail.com>
Date: Thu, 30 Jul 2009 06:02:18 +0000
Subject: powerpc: Missing tests for NULL after ioremap()

Missing tests after ioremap()

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/platforms/powermac/feature.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/platforms/powermac/feature.c b/arch/powerpc/platforms/powermac/feature.c
index 095de3227d8..fbc9bbd74db 100644
--- a/arch/powerpc/platforms/powermac/feature.c
+++ b/arch/powerpc/platforms/powermac/feature.c
@@ -2589,9 +2589,16 @@ static void __init probe_uninorth(void)
 	if (address == 0)
 		return;
 	uninorth_base = ioremap(address, 0x40000);
+	if (uninorth_base == NULL)
+		return;
 	uninorth_rev = in_be32(UN_REG(UNI_N_VERSION));
-	if (uninorth_maj == 3 || uninorth_maj == 4)
+	if (uninorth_maj == 3 || uninorth_maj == 4) {
 		u3_ht_base = ioremap(address + U3_HT_CONFIG_BASE, 0x1000);
+		if (u3_ht_base == NULL) {
+			iounmap(uninorth_base);
+			return;
+		}
+	}
 
 	printk(KERN_INFO "Found %s memory controller & host bridge"
 	       " @ 0x%08x revision: 0x%02x\n", uninorth_maj == 3 ? "U3" :
-- 
cgit v1.2.3


From 9413c8836a16e9d034928a7f9d3ad81bebd71ce9 Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Date: Wed, 29 Jul 2009 02:06:42 +0000
Subject: powerpc/cell: Move CBE_IOPTE_* to <asm/cell-regs.h>

As <asm/iommu.h> doesn't contain any other hardware specific definitions
but only interfaces.

Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/cell-regs.h    | 11 +++++++++++
 arch/powerpc/include/asm/iommu.h        | 10 ----------
 arch/powerpc/platforms/ps3/mm.c         |  2 +-
 arch/powerpc/platforms/ps3/system-bus.c |  2 +-
 4 files changed, 13 insertions(+), 12 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/cell-regs.h b/arch/powerpc/include/asm/cell-regs.h
index fd6fd00434e..fdf64fd2595 100644
--- a/arch/powerpc/include/asm/cell-regs.h
+++ b/arch/powerpc/include/asm/cell-regs.h
@@ -303,6 +303,17 @@ struct cbe_mic_tm_regs {
 extern struct cbe_mic_tm_regs __iomem *cbe_get_mic_tm_regs(struct device_node *np);
 extern struct cbe_mic_tm_regs __iomem *cbe_get_cpu_mic_tm_regs(int cpu);
 
+
+/* Cell page table entries */
+#define CBE_IOPTE_PP_W		0x8000000000000000ul /* protection: write */
+#define CBE_IOPTE_PP_R		0x4000000000000000ul /* protection: read */
+#define CBE_IOPTE_M		0x2000000000000000ul /* coherency required */
+#define CBE_IOPTE_SO_R		0x1000000000000000ul /* ordering: writes */
+#define CBE_IOPTE_SO_RW		0x1800000000000000ul /* ordering: r & w */
+#define CBE_IOPTE_RPN_Mask	0x07fffffffffff000ul /* RPN */
+#define CBE_IOPTE_H		0x0000000000000800ul /* cache hint */
+#define CBE_IOPTE_IOID_Mask	0x00000000000007fful /* ioid */
+
 /* some utility functions to deal with SMT */
 extern u32 cbe_get_hw_thread_id(int cpu);
 extern u32 cbe_cpu_to_node(int cpu);
diff --git a/arch/powerpc/include/asm/iommu.h b/arch/powerpc/include/asm/iommu.h
index 7ead7c16fb7..7464c0daddd 100644
--- a/arch/powerpc/include/asm/iommu.h
+++ b/arch/powerpc/include/asm/iommu.h
@@ -35,16 +35,6 @@
 #define IOMMU_PAGE_MASK       (~((1 << IOMMU_PAGE_SHIFT) - 1))
 #define IOMMU_PAGE_ALIGN(addr) _ALIGN_UP(addr, IOMMU_PAGE_SIZE)
 
-/* Cell page table entries */
-#define CBE_IOPTE_PP_W		0x8000000000000000ul /* protection: write */
-#define CBE_IOPTE_PP_R		0x4000000000000000ul /* protection: read */
-#define CBE_IOPTE_M		0x2000000000000000ul /* coherency required */
-#define CBE_IOPTE_SO_R		0x1000000000000000ul /* ordering: writes */
-#define CBE_IOPTE_SO_RW		0x1800000000000000ul /* ordering: r & w */
-#define CBE_IOPTE_RPN_Mask	0x07fffffffffff000ul /* RPN */
-#define CBE_IOPTE_H		0x0000000000000800ul /* cache hint */
-#define CBE_IOPTE_IOID_Mask	0x00000000000007fful /* ioid */
-
 /* Boot time flags */
 extern int iommu_is_off;
 extern int iommu_force_on;
diff --git a/arch/powerpc/platforms/ps3/mm.c b/arch/powerpc/platforms/ps3/mm.c
index 846eb8b57fd..189a25b8073 100644
--- a/arch/powerpc/platforms/ps3/mm.c
+++ b/arch/powerpc/platforms/ps3/mm.c
@@ -23,8 +23,8 @@
 #include <linux/memory_hotplug.h>
 #include <linux/lmb.h>
 
+#include <asm/cell-regs.h>
 #include <asm/firmware.h>
-#include <asm/iommu.h>
 #include <asm/prom.h>
 #include <asm/udbg.h>
 #include <asm/lv1call.h>
diff --git a/arch/powerpc/platforms/ps3/system-bus.c b/arch/powerpc/platforms/ps3/system-bus.c
index 3f763c5284a..676f989ed4e 100644
--- a/arch/powerpc/platforms/ps3/system-bus.c
+++ b/arch/powerpc/platforms/ps3/system-bus.c
@@ -27,7 +27,7 @@
 #include <asm/udbg.h>
 #include <asm/lv1call.h>
 #include <asm/firmware.h>
-#include <asm/iommu.h>
+#include <asm/cell-regs.h>
 
 #include "platform.h"
 
-- 
cgit v1.2.3


From 14ea58ad797e4e9b7be755aca0fd3925d0713ede Mon Sep 17 00:00:00 2001
From: Julia Lawall <julia@diku.dk>
Date: Sat, 1 Aug 2009 22:48:27 +0000
Subject: powerpc: Use DIV_ROUND_CLOSEST in time init code

The kernel.h macro DIV_ROUND_CLOSEST performs the computation (x + d/2)/d
but is perhaps more readable.

The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@haskernel@
@@

#include <linux/kernel.h>

@depends on haskernel@
expression x,__divisor;
@@

- (((x) + ((__divisor) / 2)) / (__divisor))
+ DIV_ROUND_CLOSEST(x,__divisor)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/time.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index eae4511ceea..edb1edb3646 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -479,7 +479,8 @@ static int __init iSeries_tb_recal(void)
 		unsigned long tb_ticks = tb - iSeries_recal_tb;
 		unsigned long titan_usec = (titan - iSeries_recal_titan) >> 12;
 		unsigned long new_tb_ticks_per_sec   = (tb_ticks * USEC_PER_SEC)/titan_usec;
-		unsigned long new_tb_ticks_per_jiffy = (new_tb_ticks_per_sec+(HZ/2))/HZ;
+		unsigned long new_tb_ticks_per_jiffy =
+			DIV_ROUND_CLOSEST(new_tb_ticks_per_sec, HZ);
 		long tick_diff = new_tb_ticks_per_jiffy - tb_ticks_per_jiffy;
 		char sign = '+';		
 		/* make sure tb_ticks_per_sec and tb_ticks_per_jiffy are consistent */
-- 
cgit v1.2.3


From 6826a57d1abc8ac9f59b24f1a008554c6560a995 Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@lst.de>
Date: Wed, 5 Aug 2009 12:24:45 +0000
Subject: powerpc: Switch to asm-generic/hardirq.h

hardirq.h on powerpc defines a __last_jiffy_stamp field, but it's not
actually used anywhere.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/hardirq.h | 30 +-----------------------------
 1 file changed, 1 insertion(+), 29 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/hardirq.h b/arch/powerpc/include/asm/hardirq.h
index 288e14d53b7..fb3c05a0cbb 100644
--- a/arch/powerpc/include/asm/hardirq.h
+++ b/arch/powerpc/include/asm/hardirq.h
@@ -1,29 +1 @@
-#ifndef _ASM_POWERPC_HARDIRQ_H
-#define _ASM_POWERPC_HARDIRQ_H
-#ifdef __KERNEL__
-
-#include <asm/irq.h>
-#include <asm/bug.h>
-
-/* The __last_jiffy_stamp field is needed to ensure that no decrementer
- * interrupt is lost on SMP machines. Since on most CPUs it is in the same
- * cache line as local_irq_count, it is cheap to access and is also used on UP
- * for uniformity.
- */
-typedef struct {
-	unsigned int __softirq_pending;	/* set_bit is used on this */
-	unsigned int __last_jiffy_stamp;
-} ____cacheline_aligned irq_cpustat_t;
-
-#include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
-
-#define last_jiffy_stamp(cpu) __IRQ_STAT((cpu), __last_jiffy_stamp)
-
-static inline void ack_bad_irq(int irq)
-{
-	printk(KERN_CRIT "illegal vector %d received!\n", irq);
-	BUG();
-}
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_POWERPC_HARDIRQ_H */
+#include <asm-generic/hardirq.h>
-- 
cgit v1.2.3


From a15098c90df1ac2b1bfe1d33dd1c47063213aa9a Mon Sep 17 00:00:00 2001
From: Michael Ellerman <michael@ellerman.id.au>
Date: Sun, 9 Aug 2009 19:02:51 +0000
Subject: powerpc: Enable GCOV

Make it possible to enable GCOV code coverage measurement on powerpc.

Lightly tested on 64-bit, seems to work as expected.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/Makefile        | 7 +++++++
 arch/powerpc/kernel/vdso32/Makefile | 1 +
 arch/powerpc/kernel/vdso64/Makefile | 2 ++
 arch/powerpc/xmon/Makefile          | 2 ++
 4 files changed, 12 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index 035946f9d5f..720e8c3b8e9 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -115,6 +115,13 @@ ifneq ($(CONFIG_XMON)$(CONFIG_KEXEC),)
 obj-y				+= ppc_save_regs.o
 endif
 
+# Disable GCOV in odd or sensitive code
+GCOV_PROFILE_prom_init.o := n
+GCOV_PROFILE_ftrace.o := n
+GCOV_PROFILE_machine_kexec_64.o := n
+GCOV_PROFILE_machine_kexec_32.o := n
+GCOV_PROFILE_kprobes.o := n
+
 extra-$(CONFIG_PPC_FPU)		+= fpu.o
 extra-$(CONFIG_ALTIVEC)		+= vector.o
 extra-$(CONFIG_PPC64)		+= entry_64.o
diff --git a/arch/powerpc/kernel/vdso32/Makefile b/arch/powerpc/kernel/vdso32/Makefile
index c3d57bd01a8..b54b8168813 100644
--- a/arch/powerpc/kernel/vdso32/Makefile
+++ b/arch/powerpc/kernel/vdso32/Makefile
@@ -12,6 +12,7 @@ endif
 targets := $(obj-vdso32) vdso32.so vdso32.so.dbg
 obj-vdso32 := $(addprefix $(obj)/, $(obj-vdso32))
 
+GCOV_PROFILE := n
 
 EXTRA_CFLAGS := -shared -fno-common -fno-builtin
 EXTRA_CFLAGS += -nostdlib -Wl,-soname=linux-vdso32.so.1 \
diff --git a/arch/powerpc/kernel/vdso64/Makefile b/arch/powerpc/kernel/vdso64/Makefile
index fa7f1b8f3e5..dd0c8e93677 100644
--- a/arch/powerpc/kernel/vdso64/Makefile
+++ b/arch/powerpc/kernel/vdso64/Makefile
@@ -7,6 +7,8 @@ obj-vdso64 = sigtramp.o gettimeofday.o datapage.o cacheflush.o note.o
 targets := $(obj-vdso64) vdso64.so vdso64.so.dbg
 obj-vdso64 := $(addprefix $(obj)/, $(obj-vdso64))
 
+GCOV_PROFILE := n
+
 EXTRA_CFLAGS := -shared -fno-common -fno-builtin
 EXTRA_CFLAGS += -nostdlib -Wl,-soname=linux-vdso64.so.1 \
 		$(call ld-option, -Wl$(comma)--hash-style=sysv)
diff --git a/arch/powerpc/xmon/Makefile b/arch/powerpc/xmon/Makefile
index 85ab97ab840..faa81b6a661 100644
--- a/arch/powerpc/xmon/Makefile
+++ b/arch/powerpc/xmon/Makefile
@@ -2,6 +2,8 @@
 
 subdir-ccflags-$(CONFIG_PPC_WERROR) := -Werror
 
+GCOV_PROFILE := n
+
 ifdef CONFIG_PPC64
 EXTRA_CFLAGS += -mno-minimal-toc
 endif
-- 
cgit v1.2.3


From 903444e4297264ec0959e886695911659edb425c Mon Sep 17 00:00:00 2001
From: Michael Ellerman <michael@ellerman.id.au>
Date: Sun, 9 Aug 2009 19:06:24 +0000
Subject: powerpc/vmlinux.lds: Move _edata down

Currently _edata does not include several data sections, this causes
the kernel's report of memory usage at boot to not match reality, and
also prevents kmemleak from working - because it scan between _sdata
and _edata for pointers to allocated memory.

This mirrors a similar change made recently to the x86 linker script.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/vmlinux.lds.S | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S
index 8ef8a14abc9..3bb09975e34 100644
--- a/arch/powerpc/kernel/vmlinux.lds.S
+++ b/arch/powerpc/kernel/vmlinux.lds.S
@@ -245,10 +245,6 @@ SECTIONS
 	}
 #endif
 
-	. = ALIGN(PAGE_SIZE);
-	_edata  =  .;
-	PROVIDE32 (edata = .);
-
 	/* The initial task and kernel stack */
 #ifdef CONFIG_PPC32
 	. = ALIGN(8192);
@@ -282,6 +278,10 @@ SECTIONS
 		__nosave_end = .;
 	}
 
+	. = ALIGN(PAGE_SIZE);
+	_edata  =  .;
+	PROVIDE32 (edata = .);
+
 /*
  * And finally the bss
  */
-- 
cgit v1.2.3


From 3c15a68880023722fc794018768df556f438ae98 Mon Sep 17 00:00:00 2001
From: Stephen Rothwell <sfr@canb.auug.org.au>
Date: Mon, 10 Aug 2009 17:14:55 +0000
Subject: powerpc: use consistent types in mktree

gcc v4.4 currently produces this build warning:

arch/powerpc/boot/mktree.c: In function 'main':
arch/powerpc/boot/mktree.c:104: warning: dereferencing type-punned pointer will break strict-aliasing rules

tmpbuf is only used as an array of unsigned ints, so declare it that way.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/boot/mktree.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/boot/mktree.c b/arch/powerpc/boot/mktree.c
index c2baae0a3d8..e2ae24340fc 100644
--- a/arch/powerpc/boot/mktree.c
+++ b/arch/powerpc/boot/mktree.c
@@ -36,7 +36,7 @@ typedef struct boot_block {
 } boot_block_t;
 
 #define IMGBLK	512
-char	tmpbuf[IMGBLK];
+unsigned int	tmpbuf[IMGBLK / sizeof(unsigned int)];
 
 int main(int argc, char *argv[])
 {
@@ -95,13 +95,13 @@ int main(int argc, char *argv[])
 
 	/* Assume zImage is an ELF file, and skip the 64K header.
 	*/
-	if (read(in_fd, tmpbuf, IMGBLK) != IMGBLK) {
+	if (read(in_fd, tmpbuf, sizeof(tmpbuf)) != sizeof(tmpbuf)) {
 		fprintf(stderr, "%s is too small to be an ELF image\n",
 				argv[1]);
 		exit(4);
 	}
 
-	if ((*(unsigned int *)tmpbuf) != htonl(0x7f454c46)) {
+	if (tmpbuf[0] != htonl(0x7f454c46)) {
 		fprintf(stderr, "%s is not an ELF image\n", argv[1]);
 		exit(4);
 	}
@@ -121,11 +121,11 @@ int main(int argc, char *argv[])
 	}
 
 	while (nblks-- > 0) {
-		if (read(in_fd, tmpbuf, IMGBLK) < 0) {
+		if (read(in_fd, tmpbuf, sizeof(tmpbuf)) < 0) {
 			perror("zImage read");
 			exit(5);
 		}
-		cp = (unsigned int *)tmpbuf;
+		cp = tmpbuf;
 		for (i = 0; i < sizeof(tmpbuf) / sizeof(unsigned int); i++)
 			cksum += *cp++;
 		if (write(out_fd, tmpbuf, sizeof(tmpbuf)) != sizeof(tmpbuf)) {
-- 
cgit v1.2.3


From 9abea08e43c6cfc18399e42cbc6028d111532f61 Mon Sep 17 00:00:00 2001
From: Eero Nurkkala <ext-eero.nurkkala@nokia.com>
Date: Thu, 20 Aug 2009 16:18:07 +0300
Subject: OMAP: McBSP: Provide functions for ASoC frame syncronization

ASoC has an annoying bug letting either L or R channel to be
played on L channel. In other words, L and R channels can
switch at random. This provides McBSP funtionality that may
be used to fix this feature.

Signed-off-by: Eero Nurkkala <ext-eero.nurkkala@nokia.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 arch/arm/plat-omap/include/mach/mcbsp.h |  2 ++
 arch/arm/plat-omap/mcbsp.c              | 52 +++++++++++++++++++++++++++++++++
 2 files changed, 54 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h
index 57249bb1e9b..b85e6e600ed 100644
--- a/arch/arm/plat-omap/include/mach/mcbsp.h
+++ b/arch/arm/plat-omap/include/mach/mcbsp.h
@@ -389,6 +389,8 @@ int omap_mcbsp_request(unsigned int id);
 void omap_mcbsp_free(unsigned int id);
 void omap_mcbsp_start(unsigned int id, int tx, int rx);
 void omap_mcbsp_stop(unsigned int id, int tx, int rx);
+void omap_mcbsp_xmit_enable(unsigned int id, u8 enable);
+void omap_mcbsp_recv_enable(unsigned int id, u8 enable);
 void omap_mcbsp_xmit_word(unsigned int id, u32 word);
 u32 omap_mcbsp_recv_word(unsigned int id);
 
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index a3d2313460b..0aa2524186f 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -412,6 +412,58 @@ void omap_mcbsp_stop(unsigned int id, int tx, int rx)
 }
 EXPORT_SYMBOL(omap_mcbsp_stop);
 
+void omap_mcbsp_xmit_enable(unsigned int id, u8 enable)
+{
+	struct omap_mcbsp *mcbsp;
+	void __iomem *io_base;
+	u16 w;
+
+	if (!(cpu_is_omap2430() || cpu_is_omap34xx()))
+		return;
+
+	if (!omap_mcbsp_check_valid_id(id)) {
+		printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+		return;
+	}
+
+	mcbsp = id_to_mcbsp_ptr(id);
+	io_base = mcbsp->io_base;
+
+	w = OMAP_MCBSP_READ(io_base, XCCR);
+
+	if (enable)
+		OMAP_MCBSP_WRITE(io_base, XCCR, w & ~(XDISABLE));
+	else
+		OMAP_MCBSP_WRITE(io_base, XCCR, w | XDISABLE);
+}
+EXPORT_SYMBOL(omap_mcbsp_xmit_enable);
+
+void omap_mcbsp_recv_enable(unsigned int id, u8 enable)
+{
+	struct omap_mcbsp *mcbsp;
+	void __iomem *io_base;
+	u16 w;
+
+	if (!(cpu_is_omap2430() || cpu_is_omap34xx()))
+		return;
+
+	if (!omap_mcbsp_check_valid_id(id)) {
+		printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+		return;
+	}
+
+	mcbsp = id_to_mcbsp_ptr(id);
+	io_base = mcbsp->io_base;
+
+	w = OMAP_MCBSP_READ(io_base, RCCR);
+
+	if (enable)
+		OMAP_MCBSP_WRITE(io_base, RCCR, w & ~(RDISABLE));
+	else
+		OMAP_MCBSP_WRITE(io_base, RCCR, w | RDISABLE);
+}
+EXPORT_SYMBOL(omap_mcbsp_recv_enable);
+
 /* polled mcbsp i/o operations */
 int omap_mcbsp_pollwrite(unsigned int id, u16 buf)
 {
-- 
cgit v1.2.3


From 946a49a95dabc9dd10344ae9ab4db9f14c5ad502 Mon Sep 17 00:00:00 2001
From: Eduardo Valentin <eduardo.valentin@nokia.com>
Date: Thu, 20 Aug 2009 16:18:08 +0300
Subject: OMAP: McBSP: Add IRQEN, IRQSTATUS, THRESHOLD2 and THRESHOLD1
 registers.

Adding McBSP register definition for IRQEN, IRQSTATUS, THRESHOLD2 and THRESHOLD1 registers.

Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 arch/arm/plat-omap/include/mach/mcbsp.h | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h
index b85e6e600ed..ceaf9eee61b 100644
--- a/arch/arm/plat-omap/include/mach/mcbsp.h
+++ b/arch/arm/plat-omap/include/mach/mcbsp.h
@@ -134,6 +134,10 @@
 #define OMAP_MCBSP_REG_XCERG	0x74
 #define OMAP_MCBSP_REG_XCERH	0x78
 #define OMAP_MCBSP_REG_SYSCON	0x8C
+#define OMAP_MCBSP_REG_THRSH2	0x90
+#define OMAP_MCBSP_REG_THRSH1	0x94
+#define OMAP_MCBSP_REG_IRQST	0xA0
+#define OMAP_MCBSP_REG_IRQEN	0xA4
 #define OMAP_MCBSP_REG_XCCR	0xAC
 #define OMAP_MCBSP_REG_RCCR	0xB0
 
-- 
cgit v1.2.3


From 44a6311c0a83f682bcf18fae389a1b270df29314 Mon Sep 17 00:00:00 2001
From: Eduardo Valentin <eduardo.valentin@nokia.com>
Date: Thu, 20 Aug 2009 16:18:09 +0300
Subject: OMAP: McBSP: Use appropriate value for startup delay

Increasing startup delay value as worst case:
 CLKSRG*2 = 8000khz: (1/8000) * 2 * 2 usec

Although, 100us may give enough time for two CLKSRG,
due to some unknown PM related, clock gating etc. reason,
this patch increases it to 500us.

Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 arch/arm/plat-omap/mcbsp.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index 0aa2524186f..e9dd70320f7 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -365,7 +365,13 @@ void omap_mcbsp_start(unsigned int id, int tx, int rx)
 	w = OMAP_MCBSP_READ(io_base, SPCR1);
 	OMAP_MCBSP_WRITE(io_base, SPCR1, w | (rx & 1));
 
-	udelay(100);
+	/*
+	 * Worst case: CLKSRG*2 = 8000khz: (1/8000) * 2 * 2 usec
+	 * REVISIT: 100us may give enough time for two CLKSRG, however
+	 * due to some unknown PM related, clock gating etc. reason it
+	 * is now at 500us.
+	 */
+	udelay(500);
 
 	if (idle) {
 		/* Start frame sync */
-- 
cgit v1.2.3


From 7aa9ff56cae7a6a4fa2e1a503cc5f8bbd887d6e3 Mon Sep 17 00:00:00 2001
From: Eduardo Valentin <eduardo.valentin@nokia.com>
Date: Thu, 20 Aug 2009 16:18:10 +0300
Subject: OMAP: McBSP: Add transmit/receive threshold handler

This patch adds a way to handle transmit/receive threshold.
It export to mcbsp users a callback registration procedure.

Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 arch/arm/plat-omap/include/mach/mcbsp.h |  9 ++++++
 arch/arm/plat-omap/mcbsp.c              | 50 +++++++++++++++++++++++++++++++++
 2 files changed, 59 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h
index ceaf9eee61b..2544aa5bccd 100644
--- a/arch/arm/plat-omap/include/mach/mcbsp.h
+++ b/arch/arm/plat-omap/include/mach/mcbsp.h
@@ -389,6 +389,15 @@ int omap_mcbsp_init(void);
 void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config,
 					int size);
 void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg * config);
+#ifdef CONFIG_ARCH_OMAP34XX
+void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold);
+void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold);
+#else
+static inline void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold)
+{ }
+static inline void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold)
+{ }
+#endif
 int omap_mcbsp_request(unsigned int id);
 void omap_mcbsp_free(unsigned int id);
 void omap_mcbsp_start(unsigned int id, int tx, int rx);
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index e9dd70320f7..081f2eace92 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -198,6 +198,56 @@ void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg *config)
 }
 EXPORT_SYMBOL(omap_mcbsp_config);
 
+#ifdef CONFIG_ARCH_OMAP34XX
+/*
+ * omap_mcbsp_set_tx_threshold configures how to deal
+ * with transmit threshold. the threshold value and handler can be
+ * configure in here.
+ */
+void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold)
+{
+	struct omap_mcbsp *mcbsp;
+	void __iomem *io_base;
+
+	if (!cpu_is_omap34xx())
+		return;
+
+	if (!omap_mcbsp_check_valid_id(id)) {
+		printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+		return;
+	}
+	mcbsp = id_to_mcbsp_ptr(id);
+	io_base = mcbsp->io_base;
+
+	OMAP_MCBSP_WRITE(io_base, THRSH2, threshold);
+}
+EXPORT_SYMBOL(omap_mcbsp_set_tx_threshold);
+
+/*
+ * omap_mcbsp_set_rx_threshold configures how to deal
+ * with receive threshold. the threshold value and handler can be
+ * configure in here.
+ */
+void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold)
+{
+	struct omap_mcbsp *mcbsp;
+	void __iomem *io_base;
+
+	if (!cpu_is_omap34xx())
+		return;
+
+	if (!omap_mcbsp_check_valid_id(id)) {
+		printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+		return;
+	}
+	mcbsp = id_to_mcbsp_ptr(id);
+	io_base = mcbsp->io_base;
+
+	OMAP_MCBSP_WRITE(io_base, THRSH1, threshold);
+}
+EXPORT_SYMBOL(omap_mcbsp_set_rx_threshold);
+#endif
+
 /*
  * We can choose between IRQ based or polled IO.
  * This needs to be called before omap_mcbsp_request().
-- 
cgit v1.2.3


From a1a56f5faa41327116bf960a8e79f21a8ea35dce Mon Sep 17 00:00:00 2001
From: Eduardo Valentin <eduardo.valentin@nokia.com>
Date: Thu, 20 Aug 2009 16:18:11 +0300
Subject: OMAP: McBSP: Create and export max_(r|t)x_thres property

This patch export through sysfs two properties to configure
maximum threshold for transmission and reception on each
mcbsp instance. Also, it exports two helper functions to
allow mcbsp users to read this values.

Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 arch/arm/mach-omap2/mcbsp.c             |   5 ++
 arch/arm/plat-omap/include/mach/mcbsp.h |  11 +++
 arch/arm/plat-omap/mcbsp.c              | 122 ++++++++++++++++++++++++++++++++
 3 files changed, 138 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index a5c0f0435cd..f837114d1d6 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -129,6 +129,7 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 		.rx_irq		= INT_24XX_MCBSP1_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP1_IRQ_TX,
 		.ops		= &omap2_mcbsp_ops,
+		.buffer_size	= 0x7F,
 	},
 	{
 		.phys_base	= OMAP34XX_MCBSP2_BASE,
@@ -137,6 +138,7 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 		.rx_irq		= INT_24XX_MCBSP2_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP2_IRQ_TX,
 		.ops		= &omap2_mcbsp_ops,
+		.buffer_size	= 0x3FF,
 	},
 	{
 		.phys_base	= OMAP34XX_MCBSP3_BASE,
@@ -145,6 +147,7 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 		.rx_irq		= INT_24XX_MCBSP3_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP3_IRQ_TX,
 		.ops		= &omap2_mcbsp_ops,
+		.buffer_size	= 0x7F,
 	},
 	{
 		.phys_base	= OMAP34XX_MCBSP4_BASE,
@@ -153,6 +156,7 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 		.rx_irq		= INT_24XX_MCBSP4_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP4_IRQ_TX,
 		.ops		= &omap2_mcbsp_ops,
+		.buffer_size	= 0x7F,
 	},
 	{
 		.phys_base	= OMAP34XX_MCBSP5_BASE,
@@ -161,6 +165,7 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 		.rx_irq		= INT_24XX_MCBSP5_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP5_IRQ_TX,
 		.ops		= &omap2_mcbsp_ops,
+		.buffer_size	= 0x7F,
 	},
 };
 #define OMAP34XX_MCBSP_PDATA_SZ		ARRAY_SIZE(omap34xx_mcbsp_pdata)
diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h
index 2544aa5bccd..832330d7cb3 100644
--- a/arch/arm/plat-omap/include/mach/mcbsp.h
+++ b/arch/arm/plat-omap/include/mach/mcbsp.h
@@ -348,6 +348,9 @@ struct omap_mcbsp_platform_data {
 	u8 dma_rx_sync, dma_tx_sync;
 	u16 rx_irq, tx_irq;
 	struct omap_mcbsp_ops *ops;
+#ifdef CONFIG_ARCH_OMAP34XX
+	u16 buffer_size;
+#endif
 };
 
 struct omap_mcbsp {
@@ -381,6 +384,10 @@ struct omap_mcbsp {
 	struct omap_mcbsp_platform_data *pdata;
 	struct clk *iclk;
 	struct clk *fclk;
+#ifdef CONFIG_ARCH_OMAP34XX
+	u16 max_tx_thres;
+	u16 max_rx_thres;
+#endif
 };
 extern struct omap_mcbsp **mcbsp_ptr;
 extern int omap_mcbsp_count;
@@ -392,11 +399,15 @@ void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg * config
 #ifdef CONFIG_ARCH_OMAP34XX
 void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold);
 void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold);
+u16 omap_mcbsp_get_max_tx_threshold(unsigned int id);
+u16 omap_mcbsp_get_max_rx_threshold(unsigned int id);
 #else
 static inline void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold)
 { }
 static inline void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold)
 { }
+static inline u16 omap_mcbsp_get_max_tx_threshold(unsigned int id) { return 0; }
+static inline u16 omap_mcbsp_get_max_rx_threshold(unsigned int id) { return 0; }
 #endif
 int omap_mcbsp_request(unsigned int id);
 void omap_mcbsp_free(unsigned int id);
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index 081f2eace92..0bbc912e548 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -246,6 +246,42 @@ void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold)
 	OMAP_MCBSP_WRITE(io_base, THRSH1, threshold);
 }
 EXPORT_SYMBOL(omap_mcbsp_set_rx_threshold);
+
+/*
+ * omap_mcbsp_get_max_tx_thres just return the current configured
+ * maximum threshold for transmission
+ */
+u16 omap_mcbsp_get_max_tx_threshold(unsigned int id)
+{
+	struct omap_mcbsp *mcbsp;
+
+	if (!omap_mcbsp_check_valid_id(id)) {
+		printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+		return -ENODEV;
+	}
+	mcbsp = id_to_mcbsp_ptr(id);
+
+	return mcbsp->max_tx_thres;
+}
+EXPORT_SYMBOL(omap_mcbsp_get_max_tx_threshold);
+
+/*
+ * omap_mcbsp_get_max_rx_thres just return the current configured
+ * maximum threshold for reception
+ */
+u16 omap_mcbsp_get_max_rx_threshold(unsigned int id)
+{
+	struct omap_mcbsp *mcbsp;
+
+	if (!omap_mcbsp_check_valid_id(id)) {
+		printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+		return -ENODEV;
+	}
+	mcbsp = id_to_mcbsp_ptr(id);
+
+	return mcbsp->max_rx_thres;
+}
+EXPORT_SYMBOL(omap_mcbsp_get_max_rx_threshold);
 #endif
 
 /*
@@ -1005,6 +1041,86 @@ void omap_mcbsp_set_spi_mode(unsigned int id,
 }
 EXPORT_SYMBOL(omap_mcbsp_set_spi_mode);
 
+#ifdef CONFIG_ARCH_OMAP34XX
+#define max_thres(m)			(mcbsp->pdata->buffer_size)
+#define valid_threshold(m, val)		((val) <= max_thres(m))
+#define THRESHOLD_PROP_BUILDER(prop)					\
+static ssize_t prop##_show(struct device *dev,				\
+			struct device_attribute *attr, char *buf)	\
+{									\
+	struct omap_mcbsp *mcbsp = dev_get_drvdata(dev);		\
+									\
+	return sprintf(buf, "%u\n", mcbsp->prop);			\
+}									\
+									\
+static ssize_t prop##_store(struct device *dev,				\
+				struct device_attribute *attr,		\
+				const char *buf, size_t size)		\
+{									\
+	struct omap_mcbsp *mcbsp = dev_get_drvdata(dev);		\
+	unsigned long val;						\
+	int status;							\
+									\
+	status = strict_strtoul(buf, 0, &val);				\
+	if (status)							\
+		return status;						\
+									\
+	if (!valid_threshold(mcbsp, val))				\
+		return -EDOM;						\
+									\
+	mcbsp->prop = val;						\
+	return size;							\
+}									\
+									\
+static DEVICE_ATTR(prop, 0644, prop##_show, prop##_store);
+
+THRESHOLD_PROP_BUILDER(max_tx_thres);
+THRESHOLD_PROP_BUILDER(max_rx_thres);
+
+static const struct attribute *threshold_attrs[] = {
+	&dev_attr_max_tx_thres.attr,
+	&dev_attr_max_rx_thres.attr,
+	NULL,
+};
+
+static const struct attribute_group threshold_attr_group = {
+	.attrs = (struct attribute **)threshold_attrs,
+};
+
+static inline int __devinit omap_thres_add(struct device *dev)
+{
+	return sysfs_create_group(&dev->kobj, &threshold_attr_group);
+}
+
+static inline void __devexit omap_thres_remove(struct device *dev)
+{
+	sysfs_remove_group(&dev->kobj, &threshold_attr_group);
+}
+
+static inline void __devinit omap34xx_device_init(struct omap_mcbsp *mcbsp)
+{
+	if (cpu_is_omap34xx()) {
+		mcbsp->max_tx_thres = max_thres(mcbsp);
+		mcbsp->max_rx_thres = max_thres(mcbsp);
+		if (omap_thres_add(mcbsp->dev))
+			dev_warn(mcbsp->dev,
+				"Unable to create threshold controls\n");
+	} else {
+		mcbsp->max_tx_thres = -EINVAL;
+		mcbsp->max_rx_thres = -EINVAL;
+	}
+}
+
+static inline void __devexit omap34xx_device_exit(struct omap_mcbsp *mcbsp)
+{
+	if (cpu_is_omap34xx())
+		omap_thres_remove(mcbsp->dev);
+}
+#else
+static inline void __devinit omap34xx_device_init(struct omap_mcbsp *mcbsp) {}
+static inline void __devexit omap34xx_device_exit(struct omap_mcbsp *mcbsp) {}
+#endif /* CONFIG_ARCH_OMAP34XX */
+
 /*
  * McBSP1 and McBSP3 are directly mapped on 1610 and 1510.
  * 730 has only 2 McBSP, and both of them are MPU peripherals.
@@ -1075,6 +1191,10 @@ static int __devinit omap_mcbsp_probe(struct platform_device *pdev)
 	mcbsp->dev = &pdev->dev;
 	mcbsp_ptr[id] = mcbsp;
 	platform_set_drvdata(pdev, mcbsp);
+
+	/* Initialize mcbsp properties for OMAP34XX if needed / applicable */
+	omap34xx_device_init(mcbsp);
+
 	return 0;
 
 err_fclk:
@@ -1098,6 +1218,8 @@ static int __devexit omap_mcbsp_remove(struct platform_device *pdev)
 				mcbsp->pdata->ops->free)
 			mcbsp->pdata->ops->free(mcbsp->id);
 
+		omap34xx_device_exit(mcbsp);
+
 		clk_disable(mcbsp->fclk);
 		clk_disable(mcbsp->iclk);
 		clk_put(mcbsp->fclk);
-- 
cgit v1.2.3


From 7e4f943b725008272d5c50e676a89d642232a4e3 Mon Sep 17 00:00:00 2001
From: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Date: Thu, 20 Aug 2009 16:18:12 +0300
Subject: OMAP3: McBSP: Lower the maximum buffersize for McBSP1, 3, 4, 5

Do not allow applications to use the full buffer found on
McBSP1,3,4,5. Using the full buffer in threshold mode causes
the McBSP buffer to run dry, which can be observed as channels
are switching (in reality the channels are shifting).

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 arch/arm/mach-omap2/mcbsp.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index f837114d1d6..7d22caf6009 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -129,7 +129,7 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 		.rx_irq		= INT_24XX_MCBSP1_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP1_IRQ_TX,
 		.ops		= &omap2_mcbsp_ops,
-		.buffer_size	= 0x7F,
+		.buffer_size	= 0x6F,
 	},
 	{
 		.phys_base	= OMAP34XX_MCBSP2_BASE,
@@ -147,7 +147,7 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 		.rx_irq		= INT_24XX_MCBSP3_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP3_IRQ_TX,
 		.ops		= &omap2_mcbsp_ops,
-		.buffer_size	= 0x7F,
+		.buffer_size	= 0x6F,
 	},
 	{
 		.phys_base	= OMAP34XX_MCBSP4_BASE,
@@ -156,7 +156,7 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 		.rx_irq		= INT_24XX_MCBSP4_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP4_IRQ_TX,
 		.ops		= &omap2_mcbsp_ops,
-		.buffer_size	= 0x7F,
+		.buffer_size	= 0x6F,
 	},
 	{
 		.phys_base	= OMAP34XX_MCBSP5_BASE,
@@ -165,7 +165,7 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 		.rx_irq		= INT_24XX_MCBSP5_IRQ_RX,
 		.tx_irq		= INT_24XX_MCBSP5_IRQ_TX,
 		.ops		= &omap2_mcbsp_ops,
-		.buffer_size	= 0x7F,
+		.buffer_size	= 0x6F,
 	},
 };
 #define OMAP34XX_MCBSP_PDATA_SZ		ARRAY_SIZE(omap34xx_mcbsp_pdata)
-- 
cgit v1.2.3


From 4c8200aeb04b8aeaf8c7425f49caf761e2cda95a Mon Sep 17 00:00:00 2001
From: Eduardo Valentin <eduardo.valentin@nokia.com>
Date: Thu, 20 Aug 2009 16:18:13 +0300
Subject: OMAP: McBSP: Rename thres sysfs symbols

This patch renames the symbols that handles threshold
sysfs properties. This way we can add more sysfs properties
to them.

Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 arch/arm/plat-omap/mcbsp.c | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index 0bbc912e548..ccaa9aedb0a 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -1077,24 +1077,24 @@ static DEVICE_ATTR(prop, 0644, prop##_show, prop##_store);
 THRESHOLD_PROP_BUILDER(max_tx_thres);
 THRESHOLD_PROP_BUILDER(max_rx_thres);
 
-static const struct attribute *threshold_attrs[] = {
+static const struct attribute *additional_attrs[] = {
 	&dev_attr_max_tx_thres.attr,
 	&dev_attr_max_rx_thres.attr,
 	NULL,
 };
 
-static const struct attribute_group threshold_attr_group = {
-	.attrs = (struct attribute **)threshold_attrs,
+static const struct attribute_group additional_attr_group = {
+	.attrs = (struct attribute **)additional_attrs,
 };
 
-static inline int __devinit omap_thres_add(struct device *dev)
+static inline int __devinit omap_additional_add(struct device *dev)
 {
-	return sysfs_create_group(&dev->kobj, &threshold_attr_group);
+	return sysfs_create_group(&dev->kobj, &additional_attr_group);
 }
 
-static inline void __devexit omap_thres_remove(struct device *dev)
+static inline void __devexit omap_additional_remove(struct device *dev)
 {
-	sysfs_remove_group(&dev->kobj, &threshold_attr_group);
+	sysfs_remove_group(&dev->kobj, &additional_attr_group);
 }
 
 static inline void __devinit omap34xx_device_init(struct omap_mcbsp *mcbsp)
@@ -1102,9 +1102,9 @@ static inline void __devinit omap34xx_device_init(struct omap_mcbsp *mcbsp)
 	if (cpu_is_omap34xx()) {
 		mcbsp->max_tx_thres = max_thres(mcbsp);
 		mcbsp->max_rx_thres = max_thres(mcbsp);
-		if (omap_thres_add(mcbsp->dev))
+		if (omap_additional_add(mcbsp->dev))
 			dev_warn(mcbsp->dev,
-				"Unable to create threshold controls\n");
+				"Unable to create additional controls\n");
 	} else {
 		mcbsp->max_tx_thres = -EINVAL;
 		mcbsp->max_rx_thres = -EINVAL;
@@ -1114,7 +1114,7 @@ static inline void __devinit omap34xx_device_init(struct omap_mcbsp *mcbsp)
 static inline void __devexit omap34xx_device_exit(struct omap_mcbsp *mcbsp)
 {
 	if (cpu_is_omap34xx())
-		omap_thres_remove(mcbsp->dev);
+		omap_additional_remove(mcbsp->dev);
 }
 #else
 static inline void __devinit omap34xx_device_init(struct omap_mcbsp *mcbsp) {}
-- 
cgit v1.2.3


From 98cb20e88957faf9c99e194242caac7f55dd47e4 Mon Sep 17 00:00:00 2001
From: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Date: Thu, 20 Aug 2009 16:18:14 +0300
Subject: OMAP: McBSP: Add link DMA mode selection

It adds a new sysfs file, where the user can configure the mcbsp mode to use.
If the mcbsp channel is in use, it does not allow the change.
Than in omap_pcm_open we can call the omap_mcbsp_get_opmode to get the mode,
store it, than use it to implement the different modes.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 arch/arm/plat-omap/include/mach/mcbsp.h |  8 ++++
 arch/arm/plat-omap/mcbsp.c              | 84 +++++++++++++++++++++++++++++++++
 2 files changed, 92 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h
index 832330d7cb3..bd5b759991c 100644
--- a/arch/arm/plat-omap/include/mach/mcbsp.h
+++ b/arch/arm/plat-omap/include/mach/mcbsp.h
@@ -255,6 +255,11 @@
 /********************** McBSP SYSCONFIG bit definitions ********************/
 #define SOFTRST			0x0002
 
+/********************** McBSP DMA operating modes **************************/
+#define MCBSP_DMA_MODE_ELEMENT		0
+#define MCBSP_DMA_MODE_THRESHOLD	1
+#define MCBSP_DMA_MODE_FRAME		2
+
 /* we don't do multichannel for now */
 struct omap_mcbsp_reg_cfg {
 	u16 spcr2;
@@ -385,6 +390,7 @@ struct omap_mcbsp {
 	struct clk *iclk;
 	struct clk *fclk;
 #ifdef CONFIG_ARCH_OMAP34XX
+	int dma_op_mode;
 	u16 max_tx_thres;
 	u16 max_rx_thres;
 #endif
@@ -401,6 +407,7 @@ void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold);
 void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold);
 u16 omap_mcbsp_get_max_tx_threshold(unsigned int id);
 u16 omap_mcbsp_get_max_rx_threshold(unsigned int id);
+int omap_mcbsp_get_dma_op_mode(unsigned int id);
 #else
 static inline void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold)
 { }
@@ -408,6 +415,7 @@ static inline void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold)
 { }
 static inline u16 omap_mcbsp_get_max_tx_threshold(unsigned int id) { return 0; }
 static inline u16 omap_mcbsp_get_max_rx_threshold(unsigned int id) { return 0; }
+static inline int omap_mcbsp_get_dma_op_mode(unsigned int id) { return 0; }
 #endif
 int omap_mcbsp_request(unsigned int id);
 void omap_mcbsp_free(unsigned int id);
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index ccaa9aedb0a..9e699947a69 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -282,6 +282,29 @@ u16 omap_mcbsp_get_max_rx_threshold(unsigned int id)
 	return mcbsp->max_rx_thres;
 }
 EXPORT_SYMBOL(omap_mcbsp_get_max_rx_threshold);
+
+/*
+ * omap_mcbsp_get_dma_op_mode just return the current configured
+ * operating mode for the mcbsp channel
+ */
+int omap_mcbsp_get_dma_op_mode(unsigned int id)
+{
+	struct omap_mcbsp *mcbsp;
+	int dma_op_mode;
+
+	if (!omap_mcbsp_check_valid_id(id)) {
+		printk(KERN_ERR "%s: Invalid id (%u)\n", __func__, id + 1);
+		return -ENODEV;
+	}
+	mcbsp = id_to_mcbsp_ptr(id);
+
+	spin_lock_irq(&mcbsp->lock);
+	dma_op_mode = mcbsp->dma_op_mode;
+	spin_unlock_irq(&mcbsp->lock);
+
+	return dma_op_mode;
+}
+EXPORT_SYMBOL(omap_mcbsp_get_dma_op_mode);
 #endif
 
 /*
@@ -1077,9 +1100,65 @@ static DEVICE_ATTR(prop, 0644, prop##_show, prop##_store);
 THRESHOLD_PROP_BUILDER(max_tx_thres);
 THRESHOLD_PROP_BUILDER(max_rx_thres);
 
+static ssize_t dma_op_mode_show(struct device *dev,
+			struct device_attribute *attr, char *buf)
+{
+	struct omap_mcbsp *mcbsp = dev_get_drvdata(dev);
+	int dma_op_mode;
+
+	spin_lock_irq(&mcbsp->lock);
+	dma_op_mode = mcbsp->dma_op_mode;
+	spin_unlock_irq(&mcbsp->lock);
+
+	return sprintf(buf, "current mode: %d\n"
+			"possible mode values are:\n"
+			"%d - %s\n"
+			"%d - %s\n"
+			"%d - %s\n",
+			dma_op_mode,
+			MCBSP_DMA_MODE_ELEMENT, "element mode",
+			MCBSP_DMA_MODE_THRESHOLD, "threshold mode",
+			MCBSP_DMA_MODE_FRAME, "frame mode");
+}
+
+static ssize_t dma_op_mode_store(struct device *dev,
+				struct device_attribute *attr,
+				const char *buf, size_t size)
+{
+	struct omap_mcbsp *mcbsp = dev_get_drvdata(dev);
+	unsigned long val;
+	int status;
+
+	status = strict_strtoul(buf, 0, &val);
+	if (status)
+		return status;
+
+	spin_lock_irq(&mcbsp->lock);
+
+	if (!mcbsp->free) {
+		size = -EBUSY;
+		goto unlock;
+	}
+
+	if (val > MCBSP_DMA_MODE_FRAME || val < MCBSP_DMA_MODE_ELEMENT) {
+		size = -EINVAL;
+		goto unlock;
+	}
+
+	mcbsp->dma_op_mode = val;
+
+unlock:
+	spin_unlock_irq(&mcbsp->lock);
+
+	return size;
+}
+
+static DEVICE_ATTR(dma_op_mode, 0644, dma_op_mode_show, dma_op_mode_store);
+
 static const struct attribute *additional_attrs[] = {
 	&dev_attr_max_tx_thres.attr,
 	&dev_attr_max_rx_thres.attr,
+	&dev_attr_dma_op_mode.attr,
 	NULL,
 };
 
@@ -1099,9 +1178,14 @@ static inline void __devexit omap_additional_remove(struct device *dev)
 
 static inline void __devinit omap34xx_device_init(struct omap_mcbsp *mcbsp)
 {
+	mcbsp->dma_op_mode = MCBSP_DMA_MODE_ELEMENT;
 	if (cpu_is_omap34xx()) {
 		mcbsp->max_tx_thres = max_thres(mcbsp);
 		mcbsp->max_rx_thres = max_thres(mcbsp);
+		/*
+		 * REVISIT: Set dmap_op_mode to THRESHOLD as default
+		 * for mcbsp2 instances.
+		 */
 		if (omap_additional_add(mcbsp->dev))
 			dev_warn(mcbsp->dev,
 				"Unable to create additional controls\n");
-- 
cgit v1.2.3


From 2122fdc629f05634537e796c0630028e4db76953 Mon Sep 17 00:00:00 2001
From: Eero Nurkkala <ext-eero.nurkkala@nokia.com>
Date: Thu, 20 Aug 2009 16:18:15 +0300
Subject: OMAP: McBSP: Wakeups utilized

This patch enables the smart idle mode while
McBPS is being utilized. Once it's done,
force idle mode is taken instead. Apart of it,
it also configures what signals will wake mcbsp up.

Signed-off-by: Eero Nurkkala <ext-eero.nurkkala@nokia.com>
Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 arch/arm/plat-omap/include/mach/mcbsp.h | 17 ++++++++++++
 arch/arm/plat-omap/mcbsp.c              | 46 +++++++++++++++++++++++++++++++++
 2 files changed, 63 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h
index bd5b759991c..333061d4f4a 100644
--- a/arch/arm/plat-omap/include/mach/mcbsp.h
+++ b/arch/arm/plat-omap/include/mach/mcbsp.h
@@ -138,6 +138,7 @@
 #define OMAP_MCBSP_REG_THRSH1	0x94
 #define OMAP_MCBSP_REG_IRQST	0xA0
 #define OMAP_MCBSP_REG_IRQEN	0xA4
+#define OMAP_MCBSP_REG_WAKEUPEN	0xA8
 #define OMAP_MCBSP_REG_XCCR	0xAC
 #define OMAP_MCBSP_REG_RCCR	0xB0
 
@@ -253,6 +254,8 @@
 #define RDISABLE		0x0001
 
 /********************** McBSP SYSCONFIG bit definitions ********************/
+#define SIDLEMODE(value)	((value)<<3)
+#define ENAWAKEUP		0x0004
 #define SOFTRST			0x0002
 
 /********************** McBSP DMA operating modes **************************/
@@ -260,6 +263,20 @@
 #define MCBSP_DMA_MODE_THRESHOLD	1
 #define MCBSP_DMA_MODE_FRAME		2
 
+/********************** McBSP WAKEUPEN bit definitions *********************/
+#define XEMPTYEOFEN		0x4000
+#define XRDYEN			0x0400
+#define XEOFEN			0x0200
+#define XFSXEN			0x0100
+#define XSYNCERREN		0x0080
+#define RRDYEN			0x0008
+#define REOFEN			0x0004
+#define RFSREN			0x0002
+#define RSYNCERREN		0x0001
+#define WAKEUPEN_ALL		(XEMPTYEOFEN | XRDYEN | XEOFEN | XFSXEN | \
+				 XSYNCERREN | RRDYEN | REOFEN | RFSREN | \
+				 RSYNCERREN)
+
 /* we don't do multichannel for now */
 struct omap_mcbsp_reg_cfg {
 	u16 spcr2;
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index 9e699947a69..136f8c5d0da 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -305,6 +305,46 @@ int omap_mcbsp_get_dma_op_mode(unsigned int id)
 	return dma_op_mode;
 }
 EXPORT_SYMBOL(omap_mcbsp_get_dma_op_mode);
+
+static inline void omap34xx_mcbsp_request(struct omap_mcbsp *mcbsp)
+{
+	/*
+	 * Enable wakup behavior, smart idle and all wakeups
+	 * REVISIT: some wakeups may be unnecessary
+	 */
+	if (cpu_is_omap34xx()) {
+		u16 syscon;
+
+		syscon = OMAP_MCBSP_READ(mcbsp->io_base, SYSCON);
+		syscon &= ~(ENAWAKEUP | SIDLEMODE(0x03));
+		syscon |= (ENAWAKEUP | SIDLEMODE(0x02));
+		OMAP_MCBSP_WRITE(mcbsp->io_base, SYSCON, syscon);
+
+		OMAP_MCBSP_WRITE(mcbsp->io_base, WAKEUPEN, WAKEUPEN_ALL);
+	}
+}
+
+static inline void omap34xx_mcbsp_free(struct omap_mcbsp *mcbsp)
+{
+	/*
+	 * Disable wakup behavior, smart idle and all wakeups
+	 */
+	if (cpu_is_omap34xx()) {
+		u16 syscon;
+		u16 wakeupen;
+
+		syscon = OMAP_MCBSP_READ(mcbsp->io_base, SYSCON);
+		syscon &= ~(ENAWAKEUP | SIDLEMODE(0x03));
+		OMAP_MCBSP_WRITE(mcbsp->io_base, SYSCON, syscon);
+
+		wakeupen = OMAP_MCBSP_READ(mcbsp->io_base, WAKEUPEN);
+		wakeupen &= ~WAKEUPEN_ALL;
+		OMAP_MCBSP_WRITE(mcbsp->io_base, WAKEUPEN, wakeupen);
+	}
+}
+#else
+static inline void omap34xx_mcbsp_request(struct omap_mcbsp *mcbsp) {}
+static inline void omap34xx_mcbsp_free(struct omap_mcbsp *mcbsp) {}
 #endif
 
 /*
@@ -366,6 +406,9 @@ int omap_mcbsp_request(unsigned int id)
 	clk_enable(mcbsp->iclk);
 	clk_enable(mcbsp->fclk);
 
+	/* Do procedure specific to omap34xx arch, if applicable */
+	omap34xx_mcbsp_request(mcbsp);
+
 	/*
 	 * Make sure that transmitter, receiver and sample-rate generator are
 	 * not running before activating IRQs.
@@ -414,6 +457,9 @@ void omap_mcbsp_free(unsigned int id)
 	if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->free)
 		mcbsp->pdata->ops->free(id);
 
+	/* Do procedure specific to omap34xx arch, if applicable */
+	omap34xx_mcbsp_free(mcbsp);
+
 	clk_disable(mcbsp->fclk);
 	clk_disable(mcbsp->iclk);
 
-- 
cgit v1.2.3


From d9a9b3f5f7d4736cfe6fae95b9d63b07faeb702e Mon Sep 17 00:00:00 2001
From: Eduardo Valentin <eduardo.valentin@nokia.com>
Date: Thu, 20 Aug 2009 16:18:16 +0300
Subject: OMAP: McBSP: Change wakeup signals

Configure only XRDYEN and RRDYEN wakeup signals
in order to get better power consumption.

Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 arch/arm/plat-omap/include/mach/mcbsp.h | 3 ---
 arch/arm/plat-omap/mcbsp.c              | 7 ++-----
 2 files changed, 2 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h
index 333061d4f4a..fe10ae8b027 100644
--- a/arch/arm/plat-omap/include/mach/mcbsp.h
+++ b/arch/arm/plat-omap/include/mach/mcbsp.h
@@ -273,9 +273,6 @@
 #define REOFEN			0x0004
 #define RFSREN			0x0002
 #define RSYNCERREN		0x0001
-#define WAKEUPEN_ALL		(XEMPTYEOFEN | XRDYEN | XEOFEN | XFSXEN | \
-				 XSYNCERREN | RRDYEN | REOFEN | RFSREN | \
-				 RSYNCERREN)
 
 /* we don't do multichannel for now */
 struct omap_mcbsp_reg_cfg {
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index 136f8c5d0da..86bfad88abd 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -320,7 +320,7 @@ static inline void omap34xx_mcbsp_request(struct omap_mcbsp *mcbsp)
 		syscon |= (ENAWAKEUP | SIDLEMODE(0x02));
 		OMAP_MCBSP_WRITE(mcbsp->io_base, SYSCON, syscon);
 
-		OMAP_MCBSP_WRITE(mcbsp->io_base, WAKEUPEN, WAKEUPEN_ALL);
+		OMAP_MCBSP_WRITE(mcbsp->io_base, WAKEUPEN, XRDYEN | RRDYEN);
 	}
 }
 
@@ -331,15 +331,12 @@ static inline void omap34xx_mcbsp_free(struct omap_mcbsp *mcbsp)
 	 */
 	if (cpu_is_omap34xx()) {
 		u16 syscon;
-		u16 wakeupen;
 
 		syscon = OMAP_MCBSP_READ(mcbsp->io_base, SYSCON);
 		syscon &= ~(ENAWAKEUP | SIDLEMODE(0x03));
 		OMAP_MCBSP_WRITE(mcbsp->io_base, SYSCON, syscon);
 
-		wakeupen = OMAP_MCBSP_READ(mcbsp->io_base, WAKEUPEN);
-		wakeupen &= ~WAKEUPEN_ALL;
-		OMAP_MCBSP_WRITE(mcbsp->io_base, WAKEUPEN, wakeupen);
+		OMAP_MCBSP_WRITE(mcbsp->io_base, WAKEUPEN, 0);
 	}
 }
 #else
-- 
cgit v1.2.3


From 2ba93f8fa77c0140de163e8a31bb9c09b5ded74c Mon Sep 17 00:00:00 2001
From: Eero Nurkkala <ext-eero.nurkkala@nokia.com>
Date: Thu, 20 Aug 2009 16:18:17 +0300
Subject: OMAP: McBSP: Retain McBSP FCLK clockactivity

FCLK may get autogated so that it prevents the McBSP
to work properly. It is the bit 9 that must be set
for maintaining the McBSP FCLK.

Signed-off-by: Eero Nurkkala <ext-eero.nurkkala@nokia.com>
Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com>
Acked-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 arch/arm/plat-omap/include/mach/mcbsp.h | 1 +
 arch/arm/plat-omap/mcbsp.c              | 6 +++---
 2 files changed, 4 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h
index fe10ae8b027..70e950e295e 100644
--- a/arch/arm/plat-omap/include/mach/mcbsp.h
+++ b/arch/arm/plat-omap/include/mach/mcbsp.h
@@ -254,6 +254,7 @@
 #define RDISABLE		0x0001
 
 /********************** McBSP SYSCONFIG bit definitions ********************/
+#define CLOCKACTIVITY(value)	((value)<<8)
 #define SIDLEMODE(value)	((value)<<3)
 #define ENAWAKEUP		0x0004
 #define SOFTRST			0x0002
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index 86bfad88abd..2c274e6f0de 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -316,8 +316,8 @@ static inline void omap34xx_mcbsp_request(struct omap_mcbsp *mcbsp)
 		u16 syscon;
 
 		syscon = OMAP_MCBSP_READ(mcbsp->io_base, SYSCON);
-		syscon &= ~(ENAWAKEUP | SIDLEMODE(0x03));
-		syscon |= (ENAWAKEUP | SIDLEMODE(0x02));
+		syscon &= ~(ENAWAKEUP | SIDLEMODE(0x03) | CLOCKACTIVITY(0x03));
+		syscon |= (ENAWAKEUP | SIDLEMODE(0x02) | CLOCKACTIVITY(0x02));
 		OMAP_MCBSP_WRITE(mcbsp->io_base, SYSCON, syscon);
 
 		OMAP_MCBSP_WRITE(mcbsp->io_base, WAKEUPEN, XRDYEN | RRDYEN);
@@ -333,7 +333,7 @@ static inline void omap34xx_mcbsp_free(struct omap_mcbsp *mcbsp)
 		u16 syscon;
 
 		syscon = OMAP_MCBSP_READ(mcbsp->io_base, SYSCON);
-		syscon &= ~(ENAWAKEUP | SIDLEMODE(0x03));
+		syscon &= ~(ENAWAKEUP | SIDLEMODE(0x03) | CLOCKACTIVITY(0x03));
 		OMAP_MCBSP_WRITE(mcbsp->io_base, SYSCON, syscon);
 
 		OMAP_MCBSP_WRITE(mcbsp->io_base, WAKEUPEN, 0);
-- 
cgit v1.2.3


From d99a7454e57d3dc9d04d6a77292a056f430a9ece Mon Sep 17 00:00:00 2001
From: Eduardo Valentin <eduardo.valentin@nokia.com>
Date: Thu, 20 Aug 2009 16:18:18 +0300
Subject: OMAP: McBSP: Configure NO IDLE mode for DMA mode different of
 threshold

Use dma mode property to configure NO IDLE or SMART IDLE of McBSPs.

Signed-off-by: Eduardo Valentin <eduardo.valentin@nokia.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 arch/arm/plat-omap/mcbsp.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index 2c274e6f0de..85176a5f414 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -317,7 +317,15 @@ static inline void omap34xx_mcbsp_request(struct omap_mcbsp *mcbsp)
 
 		syscon = OMAP_MCBSP_READ(mcbsp->io_base, SYSCON);
 		syscon &= ~(ENAWAKEUP | SIDLEMODE(0x03) | CLOCKACTIVITY(0x03));
-		syscon |= (ENAWAKEUP | SIDLEMODE(0x02) | CLOCKACTIVITY(0x02));
+
+		spin_lock_irq(&mcbsp->lock);
+		if (mcbsp->dma_op_mode == MCBSP_DMA_MODE_THRESHOLD)
+			syscon |= SIDLEMODE(0x02);
+		else
+			syscon |= SIDLEMODE(0x01);
+		spin_unlock_irq(&mcbsp->lock);
+
+		syscon |= (ENAWAKEUP | CLOCKACTIVITY(0x02));
 		OMAP_MCBSP_WRITE(mcbsp->io_base, SYSCON, syscon);
 
 		OMAP_MCBSP_WRITE(mcbsp->io_base, WAKEUPEN, XRDYEN | RRDYEN);
-- 
cgit v1.2.3


From fa3935ba34667ffd35fbb33958cd1d67035fdf82 Mon Sep 17 00:00:00 2001
From: Eero Nurkkala <ext-eero.nurkkala@nokia.com>
Date: Thu, 20 Aug 2009 16:18:19 +0300
Subject: OMAP: McBSP: Do not enable wakeups for no-idle mode

When no-idle mode is taken, wakeups need not to be enabled.
Moreover, CLOCKACTIVITY bits are unnecessary with this mode
also.

Signed-off-by: Eero Nurkkala <ext-eero.nurkkala@nokia.com>
Acked-by: Eduardo Valentin <eduardo.valentin@nokia.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 arch/arm/plat-omap/mcbsp.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index 85176a5f414..56a56887ded 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -319,16 +319,17 @@ static inline void omap34xx_mcbsp_request(struct omap_mcbsp *mcbsp)
 		syscon &= ~(ENAWAKEUP | SIDLEMODE(0x03) | CLOCKACTIVITY(0x03));
 
 		spin_lock_irq(&mcbsp->lock);
-		if (mcbsp->dma_op_mode == MCBSP_DMA_MODE_THRESHOLD)
-			syscon |= SIDLEMODE(0x02);
-		else
+		if (mcbsp->dma_op_mode == MCBSP_DMA_MODE_THRESHOLD) {
+			syscon |= (ENAWAKEUP | SIDLEMODE(0x02) |
+					CLOCKACTIVITY(0x02));
+			OMAP_MCBSP_WRITE(mcbsp->io_base, WAKEUPEN,
+					XRDYEN | RRDYEN);
+		} else {
 			syscon |= SIDLEMODE(0x01);
+		}
 		spin_unlock_irq(&mcbsp->lock);
 
-		syscon |= (ENAWAKEUP | CLOCKACTIVITY(0x02));
 		OMAP_MCBSP_WRITE(mcbsp->io_base, SYSCON, syscon);
-
-		OMAP_MCBSP_WRITE(mcbsp->io_base, WAKEUPEN, XRDYEN | RRDYEN);
 	}
 }
 
-- 
cgit v1.2.3


From 72cc6d715d5b018e2cff4adb68966855850d4e77 Mon Sep 17 00:00:00 2001
From: Eero Nurkkala <ext-eero.nurkkala@nokia.com>
Date: Thu, 20 Aug 2009 16:18:20 +0300
Subject: OMAP: McBSP: Let element DMA mode hit retention also

The device no longer hits retention if element DMA
mode is taken for at least the duration of the
serial console timeout. Force element DMA mode to
shut down through smartidle.

Signed-off-by: Eero Nurkkala <ext-eero.nurkkala@nokia.com>
Acked-by: Eduardo Valentin <eduardo.valentin@nokia.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 arch/arm/plat-omap/mcbsp.c | 9 +++++++++
 1 file changed, 9 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index 56a56887ded..b63a7209b41 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -343,6 +343,15 @@ static inline void omap34xx_mcbsp_free(struct omap_mcbsp *mcbsp)
 
 		syscon = OMAP_MCBSP_READ(mcbsp->io_base, SYSCON);
 		syscon &= ~(ENAWAKEUP | SIDLEMODE(0x03) | CLOCKACTIVITY(0x03));
+		/*
+		 * HW bug workaround - If no_idle mode is taken, we need to
+		 * go to smart_idle before going to always_idle, or the
+		 * device will not hit retention anymore.
+		 */
+		syscon |= SIDLEMODE(0x02);
+		OMAP_MCBSP_WRITE(mcbsp->io_base, SYSCON, syscon);
+
+		syscon &= ~(SIDLEMODE(0x03));
 		OMAP_MCBSP_WRITE(mcbsp->io_base, SYSCON, syscon);
 
 		OMAP_MCBSP_WRITE(mcbsp->io_base, WAKEUPEN, 0);
-- 
cgit v1.2.3


From 14412acde5b57450b8afb3d4b03132419b6abebf Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben@simtec.co.uk>
Date: Thu, 20 Aug 2009 22:50:40 +0100
Subject: ASoC: S3C24XX: Add audio core and tlv320aic23 for Simtec boards

Add core support for the range of S3C24XX Simtec boards with TLV320AIC23
CODECs on them. Since there are also boards with similar IIS routing the
AMP and the configuration code is placed in a core file for re-use with
other CODEC bindings.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 arch/arm/plat-s3c/include/plat/audio-simtec.h | 37 +++++++++++++++++++++++++++
 1 file changed, 37 insertions(+)
 create mode 100644 arch/arm/plat-s3c/include/plat/audio-simtec.h

(limited to 'arch')

diff --git a/arch/arm/plat-s3c/include/plat/audio-simtec.h b/arch/arm/plat-s3c/include/plat/audio-simtec.h
new file mode 100644
index 00000000000..0f440b9168d
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/audio-simtec.h
@@ -0,0 +1,37 @@
+/* arch/arm/plat-s3c/include/plat/audio-simtec.h
+ *
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Simtec Audio support.
+*/
+
+/**
+ * struct s3c24xx_audio_simtec_pdata - platform data for simtec audio
+ * @use_mpllin: Select codec clock from MPLLin
+ * @output_cdclk: Need to output CDCLK to the codec
+ * @have_mic: Set if we have a MIC socket
+ * @have_lout: Set if we have a LineOut socket
+ * @amp_gpio: GPIO pin to enable the AMP
+ * @amp_gain: Option GPIO to control AMP gain
+ */
+struct s3c24xx_audio_simtec_pdata {
+	unsigned int	use_mpllin:1;
+	unsigned int	output_cdclk:1;
+
+	unsigned int	have_mic:1;
+	unsigned int	have_lout:1;
+
+	int		amp_gpio;
+	int		amp_gain[2];
+
+	void	(*startup)(void);
+};
+
+extern int simtec_audio_add(const char *codec_name,
+			    struct s3c24xx_audio_simtec_pdata *pdata);
-- 
cgit v1.2.3


From 8126dec32738421afa362114337331337b4be17f Mon Sep 17 00:00:00 2001
From: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Date: Thu, 20 Aug 2009 20:23:11 +0800
Subject: x86: Fix system crash when loading with "reservetop" parameter

The system will die if the kernel is booted with "reservetop"
parameter, in present code, parse "reservetop" parameter after
early_ioremap_init(), and some function still use
early_ioremap() after it.

The problem is, "reservetop" parameter can modify
'FIXADDR_TOP', then the virtual address got by early_ioremap()
is base on old 'FIXADDR_TOP', but the page mapping is base on
new 'FIXADDR_TOP', it will occur page fault, and the IDT is not
prepare yet, so, the system is dead.

So, put parse_early_param() in the front of
early_ioremap_init() in this patch.

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Cc: yinghai@kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <4A8D402F.4080805@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/setup.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 63f32d220ef..02643cc3bf2 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -711,6 +711,11 @@ void __init setup_arch(char **cmdline_p)
 	printk(KERN_INFO "Command line: %s\n", boot_command_line);
 #endif
 
+	strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
+	*cmdline_p = command_line;
+
+	parse_early_param();
+
 	/* VMI may relocate the fixmap; do this before touching ioremap area */
 	vmi_init();
 
@@ -793,11 +798,6 @@ void __init setup_arch(char **cmdline_p)
 #endif
 #endif
 
-	strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
-	*cmdline_p = command_line;
-
-	parse_early_param();
-
 #ifdef CONFIG_X86_64
 	check_efer();
 #endif
-- 
cgit v1.2.3


From 3e0e1e9c5a327d4dba8490d83ef55c0564e6e8a7 Mon Sep 17 00:00:00 2001
From: Amerigo Wang <amwang@redhat.com>
Date: Fri, 21 Aug 2009 04:34:45 -0400
Subject: x86: Fix an incorrect argument of reserve_bootmem()

This line looks suspicious, because if this is true, then the
'flags' parameter of function reserve_bootmem_generic() will be
unused when !CONFIG_NUMA. I don't think this is what we want.

Signed-off-by: WANG Cong <amwang@redhat.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: akpm@linux-foundation.org
LKML-Reference: <20090821083709.5098.52505.sendpatchset@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/init_64.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index 6176fe8f29e..ea56b8cbb6a 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -796,7 +796,7 @@ int __init reserve_bootmem_generic(unsigned long phys, unsigned long len,
 		return ret;
 
 #else
-	reserve_bootmem(phys, len, BOOTMEM_DEFAULT);
+	reserve_bootmem(phys, len, flags);
 #endif
 
 	if (phys+len <= MAX_DMA_PFN*PAGE_SIZE) {
-- 
cgit v1.2.3


From 8b5a10fc6fd02289ea03480f93382b1a99006142 Mon Sep 17 00:00:00 2001
From: Jan Beulich <JBeulich@novell.com>
Date: Wed, 19 Aug 2009 08:40:48 +0100
Subject: x86: properly annotate alternatives.c

Some of the NOPs tables aren't used on 64-bits, quite some code and
data is needed post-init for module loading only, and a couple of
functions aren't used outside that file (i.e. can be static, and don't
need to be exported).

The change to __INITDATA/__INITRODATA is needed to avoid an assembler
warning.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
LKML-Reference: <4A8BC8A00200007800010823@vpn.id2.novell.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/include/asm/alternative.h |  7 -----
 arch/x86/kernel/alternative.c      | 56 ++++++++++++++++++++++----------------
 2 files changed, 32 insertions(+), 31 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/alternative.h b/arch/x86/include/asm/alternative.h
index 1a37bcdc860..c240efc74e0 100644
--- a/arch/x86/include/asm/alternative.h
+++ b/arch/x86/include/asm/alternative.h
@@ -73,8 +73,6 @@ static inline void alternatives_smp_module_del(struct module *mod) {}
 static inline void alternatives_smp_switch(int smp) {}
 #endif	/* CONFIG_SMP */
 
-const unsigned char *const *find_nop_table(void);
-
 /* alternative assembly primitive: */
 #define ALTERNATIVE(oldinstr, newinstr, feature)			\
 									\
@@ -144,8 +142,6 @@ static inline void apply_paravirt(struct paravirt_patch_site *start,
 #define __parainstructions_end	NULL
 #endif
 
-extern void add_nops(void *insns, unsigned int len);
-
 /*
  * Clear and restore the kernel write-protection flag on the local CPU.
  * Allows the kernel to edit read-only pages.
@@ -161,10 +157,7 @@ extern void add_nops(void *insns, unsigned int len);
  * Intel's errata.
  * On the local CPU you need to be protected again NMI or MCE handlers seeing an
  * inconsistent instruction while you patch.
- * The _early version expects the memory to already be RW.
  */
-
 extern void *text_poke(void *addr, const void *opcode, size_t len);
-extern void *text_poke_early(void *addr, const void *opcode, size_t len);
 
 #endif /* _ASM_X86_ALTERNATIVE_H */
diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c
index f5765870257..486935143e0 100644
--- a/arch/x86/kernel/alternative.c
+++ b/arch/x86/kernel/alternative.c
@@ -2,6 +2,7 @@
 #include <linux/sched.h>
 #include <linux/mutex.h>
 #include <linux/list.h>
+#include <linux/stringify.h>
 #include <linux/kprobes.h>
 #include <linux/mm.h>
 #include <linux/vmalloc.h>
@@ -32,7 +33,7 @@ __setup("smp-alt-boot", bootonly);
 #define smp_alt_once 1
 #endif
 
-static int debug_alternative;
+static int __initdata_or_module debug_alternative;
 
 static int __init debug_alt(char *str)
 {
@@ -51,7 +52,7 @@ static int __init setup_noreplace_smp(char *str)
 __setup("noreplace-smp", setup_noreplace_smp);
 
 #ifdef CONFIG_PARAVIRT
-static int noreplace_paravirt = 0;
+static int __initdata_or_module noreplace_paravirt = 0;
 
 static int __init setup_noreplace_paravirt(char *str)
 {
@@ -64,16 +65,17 @@ __setup("noreplace-paravirt", setup_noreplace_paravirt);
 #define DPRINTK(fmt, args...) if (debug_alternative) \
 	printk(KERN_DEBUG fmt, args)
 
-#ifdef GENERIC_NOP1
+#if defined(GENERIC_NOP1) && !defined(CONFIG_X86_64)
 /* Use inline assembly to define this because the nops are defined
    as inline assembly strings in the include files and we cannot
    get them easily into strings. */
-asm("\t.section .rodata, \"a\"\nintelnops: "
+asm("\t" __stringify(__INITRODATA_OR_MODULE) "\nintelnops: "
 	GENERIC_NOP1 GENERIC_NOP2 GENERIC_NOP3 GENERIC_NOP4 GENERIC_NOP5 GENERIC_NOP6
 	GENERIC_NOP7 GENERIC_NOP8
     "\t.previous");
 extern const unsigned char intelnops[];
-static const unsigned char *const intel_nops[ASM_NOP_MAX+1] = {
+static const unsigned char *const __initconst_or_module
+intel_nops[ASM_NOP_MAX+1] = {
 	NULL,
 	intelnops,
 	intelnops + 1,
@@ -87,12 +89,13 @@ static const unsigned char *const intel_nops[ASM_NOP_MAX+1] = {
 #endif
 
 #ifdef K8_NOP1
-asm("\t.section .rodata, \"a\"\nk8nops: "
+asm("\t" __stringify(__INITRODATA_OR_MODULE) "\nk8nops: "
 	K8_NOP1 K8_NOP2 K8_NOP3 K8_NOP4 K8_NOP5 K8_NOP6
 	K8_NOP7 K8_NOP8
     "\t.previous");
 extern const unsigned char k8nops[];
-static const unsigned char *const k8_nops[ASM_NOP_MAX+1] = {
+static const unsigned char *const __initconst_or_module
+k8_nops[ASM_NOP_MAX+1] = {
 	NULL,
 	k8nops,
 	k8nops + 1,
@@ -105,13 +108,14 @@ static const unsigned char *const k8_nops[ASM_NOP_MAX+1] = {
 };
 #endif
 
-#ifdef K7_NOP1
-asm("\t.section .rodata, \"a\"\nk7nops: "
+#if defined(K7_NOP1) && !defined(CONFIG_X86_64)
+asm("\t" __stringify(__INITRODATA_OR_MODULE) "\nk7nops: "
 	K7_NOP1 K7_NOP2 K7_NOP3 K7_NOP4 K7_NOP5 K7_NOP6
 	K7_NOP7 K7_NOP8
     "\t.previous");
 extern const unsigned char k7nops[];
-static const unsigned char *const k7_nops[ASM_NOP_MAX+1] = {
+static const unsigned char *const __initconst_or_module
+k7_nops[ASM_NOP_MAX+1] = {
 	NULL,
 	k7nops,
 	k7nops + 1,
@@ -125,12 +129,13 @@ static const unsigned char *const k7_nops[ASM_NOP_MAX+1] = {
 #endif
 
 #ifdef P6_NOP1
-asm("\t.section .rodata, \"a\"\np6nops: "
+asm("\t" __stringify(__INITRODATA_OR_MODULE) "\np6nops: "
 	P6_NOP1 P6_NOP2 P6_NOP3 P6_NOP4 P6_NOP5 P6_NOP6
 	P6_NOP7 P6_NOP8
     "\t.previous");
 extern const unsigned char p6nops[];
-static const unsigned char *const p6_nops[ASM_NOP_MAX+1] = {
+static const unsigned char *const __initconst_or_module
+p6_nops[ASM_NOP_MAX+1] = {
 	NULL,
 	p6nops,
 	p6nops + 1,
@@ -146,7 +151,7 @@ static const unsigned char *const p6_nops[ASM_NOP_MAX+1] = {
 #ifdef CONFIG_X86_64
 
 extern char __vsyscall_0;
-const unsigned char *const *find_nop_table(void)
+static const unsigned char *const *__init_or_module find_nop_table(void)
 {
 	if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL &&
 	    boot_cpu_has(X86_FEATURE_NOPL))
@@ -157,7 +162,7 @@ const unsigned char *const *find_nop_table(void)
 
 #else /* CONFIG_X86_64 */
 
-const unsigned char *const *find_nop_table(void)
+static const unsigned char *const *__init_or_module find_nop_table(void)
 {
 	if (boot_cpu_has(X86_FEATURE_K8))
 		return k8_nops;
@@ -172,7 +177,7 @@ const unsigned char *const *find_nop_table(void)
 #endif /* CONFIG_X86_64 */
 
 /* Use this to add nops to a buffer, then text_poke the whole buffer. */
-void add_nops(void *insns, unsigned int len)
+static void __init_or_module add_nops(void *insns, unsigned int len)
 {
 	const unsigned char *const *noptable = find_nop_table();
 
@@ -185,10 +190,10 @@ void add_nops(void *insns, unsigned int len)
 		len -= noplen;
 	}
 }
-EXPORT_SYMBOL_GPL(add_nops);
 
 extern struct alt_instr __alt_instructions[], __alt_instructions_end[];
 extern u8 *__smp_locks[], *__smp_locks_end[];
+static void *text_poke_early(void *addr, const void *opcode, size_t len);
 
 /* Replace instructions with better alternatives for this CPU type.
    This runs before SMP is initialized to avoid SMP problems with
@@ -196,7 +201,8 @@ extern u8 *__smp_locks[], *__smp_locks_end[];
    APs have less capabilities than the boot processor are not handled.
    Tough. Make sure you disable such features by hand. */
 
-void apply_alternatives(struct alt_instr *start, struct alt_instr *end)
+void __init_or_module apply_alternatives(struct alt_instr *start,
+					 struct alt_instr *end)
 {
 	struct alt_instr *a;
 	char insnbuf[MAX_PATCH_LEN];
@@ -279,9 +285,10 @@ static LIST_HEAD(smp_alt_modules);
 static DEFINE_MUTEX(smp_alt);
 static int smp_mode = 1;	/* protected by smp_alt */
 
-void alternatives_smp_module_add(struct module *mod, char *name,
-				 void *locks, void *locks_end,
-				 void *text,  void *text_end)
+void __init_or_module alternatives_smp_module_add(struct module *mod,
+						  char *name,
+						  void *locks, void *locks_end,
+						  void *text,  void *text_end)
 {
 	struct smp_alt_module *smp;
 
@@ -317,7 +324,7 @@ void alternatives_smp_module_add(struct module *mod, char *name,
 	mutex_unlock(&smp_alt);
 }
 
-void alternatives_smp_module_del(struct module *mod)
+void __init_or_module alternatives_smp_module_del(struct module *mod)
 {
 	struct smp_alt_module *item;
 
@@ -386,8 +393,8 @@ void alternatives_smp_switch(int smp)
 #endif
 
 #ifdef CONFIG_PARAVIRT
-void apply_paravirt(struct paravirt_patch_site *start,
-		    struct paravirt_patch_site *end)
+void __init_or_module apply_paravirt(struct paravirt_patch_site *start,
+				     struct paravirt_patch_site *end)
 {
 	struct paravirt_patch_site *p;
 	char insnbuf[MAX_PATCH_LEN];
@@ -485,7 +492,8 @@ void __init alternative_instructions(void)
  * instructions. And on the local CPU you need to be protected again NMI or MCE
  * handlers seeing an inconsistent instruction while you patch.
  */
-void *text_poke_early(void *addr, const void *opcode, size_t len)
+static void *__init_or_module text_poke_early(void *addr, const void *opcode,
+					      size_t len)
 {
 	unsigned long flags;
 	local_irq_save(flags);
-- 
cgit v1.2.3


From d0af9eed5aa91b6b7b5049cae69e5ea956fd85c3 Mon Sep 17 00:00:00 2001
From: Suresh Siddha <suresh.b.siddha@intel.com>
Date: Wed, 19 Aug 2009 18:05:36 -0700
Subject: x86, pat/mtrr: Rendezvous all the cpus for MTRR/PAT init

SDM Vol 3a section titled "MTRR considerations in MP systems" specifies
the need for synchronizing the logical cpu's while initializing/updating
MTRR.

Currently Linux kernel does the synchronization of all cpu's only when
a single MTRR register is programmed/updated. During an AP online
(during boot/cpu-online/resume)  where we initialize all the MTRR/PAT registers,
we don't follow this synchronization algorithm.

This can lead to scenarios where during a dynamic cpu online, that logical cpu
is initializing MTRR/PAT with cache disabled (cr0.cd=1) etc while other logical
HT sibling continue to run (also with cache disabled because of cr0.cd=1
on its sibling).

Starting from Westmere, VMX transitions with cr0.cd=1 don't work properly
(because of some VMX performance optimizations) and the above scenario
(with one logical cpu doing VMX activity and another logical cpu coming online)
can result in system crash.

Fix the MTRR initialization by doing rendezvous of all the cpus. During
boot and resume, we delay the MTRR/PAT init for APs till all the
logical cpu's come online and the rendezvous process at the end of AP's bringup,
will initialize the MTRR/PAT for all AP's.

For dynamic single cpu online, we synchronize all the logical cpus and
do the MTRR/PAT init on the AP that is coming online.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/include/asm/mtrr.h     |  7 +++++++
 arch/x86/kernel/cpu/mtrr/main.c | 46 +++++++++++++++++++++++++++++++++--------
 arch/x86/kernel/smpboot.c       | 14 +++++++++++++
 arch/x86/power/cpu.c            |  2 +-
 4 files changed, 59 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/mtrr.h b/arch/x86/include/asm/mtrr.h
index a51ada8467d..d5366ec5cb8 100644
--- a/arch/x86/include/asm/mtrr.h
+++ b/arch/x86/include/asm/mtrr.h
@@ -121,8 +121,12 @@ extern int mtrr_del_page(int reg, unsigned long base, unsigned long size);
 extern void mtrr_centaur_report_mcr(int mcr, u32 lo, u32 hi);
 extern void mtrr_ap_init(void);
 extern void mtrr_bp_init(void);
+extern void set_mtrr_aps_delayed_init(void);
+extern void mtrr_aps_init(void);
+extern void mtrr_bp_restore(void);
 extern int mtrr_trim_uncached_memory(unsigned long end_pfn);
 extern int amd_special_default_mtrr(void);
+extern u32 mtrr_aps_delayed_init;
 #  else
 static inline u8 mtrr_type_lookup(u64 addr, u64 end)
 {
@@ -161,6 +165,9 @@ static inline void mtrr_centaur_report_mcr(int mcr, u32 lo, u32 hi)
 
 #define mtrr_ap_init() do {} while (0)
 #define mtrr_bp_init() do {} while (0)
+#define set_mtrr_aps_delayed_init() do {} while (0)
+#define mtrr_aps_init() do {} while (0)
+#define mtrr_bp_restore() do {} while (0)
 #  endif
 
 #ifdef CONFIG_COMPAT
diff --git a/arch/x86/kernel/cpu/mtrr/main.c b/arch/x86/kernel/cpu/mtrr/main.c
index 7af0f88a416..7339be0aa58 100644
--- a/arch/x86/kernel/cpu/mtrr/main.c
+++ b/arch/x86/kernel/cpu/mtrr/main.c
@@ -58,6 +58,7 @@ unsigned int mtrr_usage_table[MTRR_MAX_VAR_RANGES];
 static DEFINE_MUTEX(mtrr_mutex);
 
 u64 size_or_mask, size_and_mask;
+u32 mtrr_aps_delayed_init;
 
 static struct mtrr_ops *mtrr_ops[X86_VENDOR_NUM];
 
@@ -163,7 +164,10 @@ static void ipi_handler(void *info)
 	if (data->smp_reg != ~0U) {
 		mtrr_if->set(data->smp_reg, data->smp_base,
 			     data->smp_size, data->smp_type);
-	} else {
+	} else if (mtrr_aps_delayed_init) {
+		/*
+		 * Initialize the MTRRs inaddition to the synchronisation.
+		 */
 		mtrr_if->set_all();
 	}
 
@@ -265,6 +269,8 @@ set_mtrr(unsigned int reg, unsigned long base, unsigned long size, mtrr_type typ
 	 */
 	if (reg != ~0U)
 		mtrr_if->set(reg, base, size, type);
+	else if (!mtrr_aps_delayed_init)
+		mtrr_if->set_all();
 
 	/* Wait for the others */
 	while (atomic_read(&data.count))
@@ -721,9 +727,7 @@ void __init mtrr_bp_init(void)
 
 void mtrr_ap_init(void)
 {
-	unsigned long flags;
-
-	if (!mtrr_if || !use_intel())
+	if (!use_intel() || mtrr_aps_delayed_init)
 		return;
 	/*
 	 * Ideally we should hold mtrr_mutex here to avoid mtrr entries
@@ -738,11 +742,7 @@ void mtrr_ap_init(void)
 	 *   2. cpu hotadd time. We let mtrr_add/del_page hold cpuhotplug
 	 *      lock to prevent mtrr entry changes
 	 */
-	local_irq_save(flags);
-
-	mtrr_if->set_all();
-
-	local_irq_restore(flags);
+	set_mtrr(~0U, 0, 0, 0);
 }
 
 /**
@@ -753,6 +753,34 @@ void mtrr_save_state(void)
 	smp_call_function_single(0, mtrr_save_fixed_ranges, NULL, 1);
 }
 
+void set_mtrr_aps_delayed_init(void)
+{
+	if (!use_intel())
+		return;
+
+	mtrr_aps_delayed_init = 1;
+}
+
+/*
+ * MTRR initialization for all AP's
+ */
+void mtrr_aps_init(void)
+{
+	if (!use_intel())
+		return;
+
+	set_mtrr(~0U, 0, 0, 0);
+	mtrr_aps_delayed_init = 0;
+}
+
+void mtrr_bp_restore(void)
+{
+	if (!use_intel())
+		return;
+
+	mtrr_if->set_all();
+}
+
 static int __init mtrr_init_finialize(void)
 {
 	if (!mtrr_if)
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 2fecda69ee6..d720b7e0cf3 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -1116,9 +1116,22 @@ void __init native_smp_prepare_cpus(unsigned int max_cpus)
 
 	if (is_uv_system())
 		uv_system_init();
+
+	set_mtrr_aps_delayed_init();
 out:
 	preempt_enable();
 }
+
+void arch_enable_nonboot_cpus_begin(void)
+{
+	set_mtrr_aps_delayed_init();
+}
+
+void arch_enable_nonboot_cpus_end(void)
+{
+	mtrr_aps_init();
+}
+
 /*
  * Early setup to make printk work.
  */
@@ -1140,6 +1153,7 @@ void __init native_smp_cpus_done(unsigned int max_cpus)
 	setup_ioapic_dest();
 #endif
 	check_nmi_watchdog();
+	mtrr_aps_init();
 }
 
 static int __initdata setup_possible_cpus = -1;
diff --git a/arch/x86/power/cpu.c b/arch/x86/power/cpu.c
index b3d20b9cac6..417c9f5b4af 100644
--- a/arch/x86/power/cpu.c
+++ b/arch/x86/power/cpu.c
@@ -242,7 +242,7 @@ static void __restore_processor_state(struct saved_context *ctxt)
 	fix_processor_context();
 
 	do_fpu_end();
-	mtrr_ap_init();
+	mtrr_bp_restore();
 
 #ifdef CONFIG_X86_OLD_MCE
 	mcheck_init(&boot_cpu_data);
-- 
cgit v1.2.3


From 5400743db5a06a4e6e298725a2044c40edcb27b9 Mon Sep 17 00:00:00 2001
From: "H. Peter Anvin" <hpa@zytor.com>
Date: Fri, 21 Aug 2009 17:00:02 -0700
Subject: x86, mtrr: make mtrr_aps_delayed_init static bool

mtr_aps_delayed_init was declared u32 and made global, but it only
ever takes boolean values and is only ever used in
arch/x86/kernel/cpu/mtrr/main.c.  Declare it "static bool" and remove
external references.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
---
 arch/x86/include/asm/mtrr.h     | 1 -
 arch/x86/kernel/cpu/mtrr/main.c | 6 +++---
 2 files changed, 3 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/mtrr.h b/arch/x86/include/asm/mtrr.h
index d5366ec5cb8..4365ffdb461 100644
--- a/arch/x86/include/asm/mtrr.h
+++ b/arch/x86/include/asm/mtrr.h
@@ -126,7 +126,6 @@ extern void mtrr_aps_init(void);
 extern void mtrr_bp_restore(void);
 extern int mtrr_trim_uncached_memory(unsigned long end_pfn);
 extern int amd_special_default_mtrr(void);
-extern u32 mtrr_aps_delayed_init;
 #  else
 static inline u8 mtrr_type_lookup(u64 addr, u64 end)
 {
diff --git a/arch/x86/kernel/cpu/mtrr/main.c b/arch/x86/kernel/cpu/mtrr/main.c
index 7339be0aa58..84e83de5457 100644
--- a/arch/x86/kernel/cpu/mtrr/main.c
+++ b/arch/x86/kernel/cpu/mtrr/main.c
@@ -58,7 +58,7 @@ unsigned int mtrr_usage_table[MTRR_MAX_VAR_RANGES];
 static DEFINE_MUTEX(mtrr_mutex);
 
 u64 size_or_mask, size_and_mask;
-u32 mtrr_aps_delayed_init;
+static bool mtrr_aps_delayed_init;
 
 static struct mtrr_ops *mtrr_ops[X86_VENDOR_NUM];
 
@@ -758,7 +758,7 @@ void set_mtrr_aps_delayed_init(void)
 	if (!use_intel())
 		return;
 
-	mtrr_aps_delayed_init = 1;
+	mtrr_aps_delayed_init = true;
 }
 
 /*
@@ -770,7 +770,7 @@ void mtrr_aps_init(void)
 		return;
 
 	set_mtrr(~0U, 0, 0, 0);
-	mtrr_aps_delayed_init = 0;
+	mtrr_aps_delayed_init = false;
 }
 
 void mtrr_bp_restore(void)
-- 
cgit v1.2.3


From a157229cabd6dd8cfa82525fc9bf730c94cc9ac2 Mon Sep 17 00:00:00 2001
From: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Date: Sat, 22 Aug 2009 13:56:51 -0700
Subject: rcu: Simplify rcu_pending()/rcu_check_callbacks() API

All calls from outside RCU are of the form:

	if (rcu_pending(cpu))
		rcu_check_callbacks(cpu, user);

This is silly, instead we put a call to rcu_pending() in
rcu_check_callbacks(), and then make the outside calls be to
rcu_check_callbacks().  This cuts down on the code a bit and
also gives the compiler a better chance of optimizing.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: laijs@cn.fujitsu.com
Cc: dipankar@in.ibm.com
Cc: akpm@linux-foundation.org
Cc: mathieu.desnoyers@polymtl.ca
Cc: josht@linux.vnet.ibm.com
Cc: dvhltc@us.ibm.com
Cc: niv@us.ibm.com
Cc: peterz@infradead.org
Cc: rostedt@goodmis.org
LKML-Reference: <125097461311-git-send-email->
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/ia64/xen/time.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/ia64/xen/time.c b/arch/ia64/xen/time.c
index fb833269017..dbeadb9c8e2 100644
--- a/arch/ia64/xen/time.c
+++ b/arch/ia64/xen/time.c
@@ -133,8 +133,7 @@ consider_steal_time(unsigned long new_itm)
 		account_idle_ticks(blocked);
 		run_local_timers();
 
-		if (rcu_pending(cpu))
-			rcu_check_callbacks(cpu, user_mode(get_irq_regs()));
+		rcu_check_callbacks(cpu, user_mode(get_irq_regs()));
 
 		scheduler_tick();
 		run_posix_cpu_timers(p);
-- 
cgit v1.2.3


From 366d19e181be873c70f4aafca3931d77d781ccd7 Mon Sep 17 00:00:00 2001
From: Tobias Doerffel <tobias.doerffel@gmail.com>
Date: Fri, 21 Aug 2009 23:06:23 +0200
Subject: x86: add specific support for Intel Atom architecture

Add another option when selecting CPU family so the kernel can be
optimized for Intel Atom CPUs. If GCC supports tuning options for
Intel Atom they will be used.

Signed-off-by: Tobias Doerffel <tobias.doerffel@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
LKML-Reference: <1251018457-19157-1-git-send-email-tobias.doerffel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/Kconfig.cpu          | 19 ++++++++++++++-----
 arch/x86/Makefile             |  2 ++
 arch/x86/Makefile_32.cpu      |  2 ++
 arch/x86/include/asm/module.h |  2 ++
 4 files changed, 20 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu
index 8130334329c..527519b8a9f 100644
--- a/arch/x86/Kconfig.cpu
+++ b/arch/x86/Kconfig.cpu
@@ -262,6 +262,15 @@ config MCORE2
 	  family in /proc/cpuinfo. Newer ones have 6 and older ones 15
 	  (not a typo)
 
+config MATOM
+	bool "Intel Atom"
+	---help---
+
+	  Select this for the Intel Atom platform. Intel Atom CPUs have an
+	  in-order pipelining architecture and thus can benefit from
+	  accordingly optimized code. Use a recent GCC with specific Atom
+	  support in order to fully benefit from selecting this option.
+
 config GENERIC_CPU
 	bool "Generic-x86-64"
 	depends on X86_64
@@ -295,7 +304,7 @@ config X86_CPU
 config X86_L1_CACHE_BYTES
 	int
 	default "128" if MPSC
-	default "64" if GENERIC_CPU || MK8 || MCORE2 || X86_32
+	default "64" if GENERIC_CPU || MK8 || MCORE2 || MATOM || X86_32
 
 config X86_INTERNODE_CACHE_BYTES
 	int
@@ -310,7 +319,7 @@ config X86_L1_CACHE_SHIFT
 	default "7" if MPENTIUM4 || MPSC
 	default "4" if X86_ELAN || M486 || M386 || MGEODEGX1
 	default "5" if MWINCHIP3D || MWINCHIPC6 || MCRUSOE || MEFFICEON || MCYRIXIII || MK6 || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || M586 || MVIAC3_2 || MGEODE_LX
-	default "6" if MK7 || MK8 || MPENTIUMM || MCORE2 || MVIAC7 || X86_GENERIC || GENERIC_CPU
+	default "6" if MK7 || MK8 || MPENTIUMM || MCORE2 || MATOM || MVIAC7 || X86_GENERIC || GENERIC_CPU
 
 config X86_XADD
 	def_bool y
@@ -359,7 +368,7 @@ config X86_INTEL_USERCOPY
 
 config X86_USE_PPRO_CHECKSUM
 	def_bool y
-	depends on MWINCHIP3D || MWINCHIPC6 || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MK8 || MVIAC3_2 || MEFFICEON || MGEODE_LX || MCORE2
+	depends on MWINCHIP3D || MWINCHIPC6 || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MK8 || MVIAC3_2 || MEFFICEON || MGEODE_LX || MCORE2 || MATOM
 
 config X86_USE_3DNOW
 	def_bool y
@@ -387,7 +396,7 @@ config X86_P6_NOP
 
 config X86_TSC
 	def_bool y
-	depends on ((MWINCHIP3D || MCRUSOE || MEFFICEON || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MVIAC3_2 || MVIAC7 || MGEODEGX1 || MGEODE_LX || MCORE2) && !X86_NUMAQ) || X86_64
+	depends on ((MWINCHIP3D || MCRUSOE || MEFFICEON || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MVIAC3_2 || MVIAC7 || MGEODEGX1 || MGEODE_LX || MCORE2 || MATOM) && !X86_NUMAQ) || X86_64
 
 config X86_CMPXCHG64
 	def_bool y
@@ -397,7 +406,7 @@ config X86_CMPXCHG64
 # generates cmov.
 config X86_CMOV
 	def_bool y
-	depends on (MK8 || MK7 || MCORE2 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MVIAC3_2 || MVIAC7 || MCRUSOE || MEFFICEON || X86_64)
+	depends on (MK8 || MK7 || MCORE2 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MVIAC3_2 || MVIAC7 || MCRUSOE || MEFFICEON || X86_64 || MATOM)
 
 config X86_MINIMUM_CPU_FAMILY
 	int
diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index 1b68659c41b..8a4c24c96d0 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -55,6 +55,8 @@ else
 
         cflags-$(CONFIG_MCORE2) += \
                 $(call cc-option,-march=core2,$(call cc-option,-mtune=generic))
+	cflags-$(CONFIG_MATOM) += $(call cc-option,-march=atom) \
+		$(call cc-option,-mtune=atom,$(call cc-option,-mtune=generic))
         cflags-$(CONFIG_GENERIC_CPU) += $(call cc-option,-mtune=generic)
         KBUILD_CFLAGS += $(cflags-y)
 
diff --git a/arch/x86/Makefile_32.cpu b/arch/x86/Makefile_32.cpu
index 80177ec052f..30e9a264f69 100644
--- a/arch/x86/Makefile_32.cpu
+++ b/arch/x86/Makefile_32.cpu
@@ -33,6 +33,8 @@ cflags-$(CONFIG_MCYRIXIII)	+= $(call cc-option,-march=c3,-march=i486) $(align)-f
 cflags-$(CONFIG_MVIAC3_2)	+= $(call cc-option,-march=c3-2,-march=i686)
 cflags-$(CONFIG_MVIAC7)		+= -march=i686
 cflags-$(CONFIG_MCORE2)		+= -march=i686 $(call tune,core2)
+cflags-$(CONFIG_MATOM)		+= $(call cc-option,-march=atom,$(call cc-option,-march=core2,-march=i686)) \
+	$(call cc-option,-mtune=atom,$(call cc-option,-mtune=generic))
 
 # AMD Elan support
 cflags-$(CONFIG_X86_ELAN)	+= -march=i486
diff --git a/arch/x86/include/asm/module.h b/arch/x86/include/asm/module.h
index 47d62743c4d..e959c4afab5 100644
--- a/arch/x86/include/asm/module.h
+++ b/arch/x86/include/asm/module.h
@@ -28,6 +28,8 @@ struct mod_arch_specific {};
 #define MODULE_PROC_FAMILY "586MMX "
 #elif defined CONFIG_MCORE2
 #define MODULE_PROC_FAMILY "CORE2 "
+#elif defined CONFIG_MATOM
+#define MODULE_PROC_FAMILY "ATOM "
 #elif defined CONFIG_M686
 #define MODULE_PROC_FAMILY "686 "
 #elif defined CONFIG_MPENTIUMII
-- 
cgit v1.2.3


From 10f02d1168585edf66229bb2ec90a42f32667a78 Mon Sep 17 00:00:00 2001
From: Alexey Dobriyan <adobriyan@gmail.com>
Date: Sun, 23 Aug 2009 23:17:27 +0400
Subject: x86: uv: Clean up uv_ptc_init(), use proc_create()

create_proc_entry() is getting duhprecated.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: cpw@sgi.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/tlb_uv.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/tlb_uv.c b/arch/x86/kernel/tlb_uv.c
index 77b9689f8ed..503c1f2e883 100644
--- a/arch/x86/kernel/tlb_uv.c
+++ b/arch/x86/kernel/tlb_uv.c
@@ -640,13 +640,13 @@ static int __init uv_ptc_init(void)
 	if (!is_uv_system())
 		return 0;
 
-	proc_uv_ptc = create_proc_entry(UV_PTC_BASENAME, 0444, NULL);
+	proc_uv_ptc = proc_create(UV_PTC_BASENAME, 0444, NULL,
+				  &proc_uv_ptc_operations);
 	if (!proc_uv_ptc) {
 		printk(KERN_ERR "unable to create %s proc entry\n",
 		       UV_PTC_BASENAME);
 		return -EINVAL;
 	}
-	proc_uv_ptc->proc_fops = &proc_uv_ptc_operations;
 	return 0;
 }
 
-- 
cgit v1.2.3


From 9f0f4ae570a148c76be6e86c959c8d4ed912fb1f Mon Sep 17 00:00:00 2001
From: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Date: Sun, 23 Aug 2009 17:56:12 +0200
Subject: ARM: OMAP: DMA: Add support for DMA channel self linking on OMAP1510

Implement DMA channel self linking on OMAP1510 using AUTO_INIT and REPEAT
flags of the DMA CCR register.

Created against linux-2.6.31-rc5.

Tested on Amstrad Delta.

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 arch/arm/plat-omap/dma.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index def14ec265b..da4cc5288db 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -1125,6 +1125,11 @@ int omap_dma_running(void)
 void omap_dma_link_lch(int lch_head, int lch_queue)
 {
 	if (omap_dma_in_1510_mode()) {
+		if (lch_head == lch_queue) {
+			dma_write(dma_read(CCR(lch_head)) | (3 << 8),
+								CCR(lch_head));
+			return;
+		}
 		printk(KERN_ERR "DMA linking is not supported in 1510 mode\n");
 		BUG();
 		return;
@@ -1147,6 +1152,11 @@ EXPORT_SYMBOL(omap_dma_link_lch);
 void omap_dma_unlink_lch(int lch_head, int lch_queue)
 {
 	if (omap_dma_in_1510_mode()) {
+		if (lch_head == lch_queue) {
+			dma_write(dma_read(CCR(lch_head)) & ~(3 << 8),
+								CCR(lch_head));
+			return;
+		}
 		printk(KERN_ERR "DMA linking is not supported in 1510 mode\n");
 		BUG();
 		return;
-- 
cgit v1.2.3


From 8934210cfe925f0d3e3089c69e9e88021324801b Mon Sep 17 00:00:00 2001
From: Heiko Schocher <hs@denx.de>
Date: Fri, 7 Aug 2009 08:41:15 +0200
Subject: powerpc/82xx: mgcoge - updated defconfig

- add I2C support
- add FCC1 and FCC2 support

Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/configs/mgcoge_defconfig | 86 ++++++++++++++++++++++++++++++++---
 1 file changed, 80 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/configs/mgcoge_defconfig b/arch/powerpc/configs/mgcoge_defconfig
index e9491c1c3f3..30b68bfaceb 100644
--- a/arch/powerpc/configs/mgcoge_defconfig
+++ b/arch/powerpc/configs/mgcoge_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
-# Wed Jul 29 23:31:51 2009
+# Linux kernel version: 2.6.31-rc5
+# Fri Aug  7 08:19:15 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -158,6 +158,7 @@ CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 CONFIG_LBDAF=y
+CONFIG_BLK_DEV_BSG=y
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
@@ -506,6 +507,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
+CONFIG_OF_I2C=y
 CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
@@ -582,7 +584,8 @@ CONFIG_PHYLIB=y
 # CONFIG_STE10XP is not set
 # CONFIG_LSI_ET1011C_PHY is not set
 CONFIG_FIXED_PHY=y
-# CONFIG_MDIO_BITBANG is not set
+CONFIG_MDIO_BITBANG=y
+# CONFIG_MDIO_GPIO is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_MACE is not set
@@ -608,8 +611,8 @@ CONFIG_MII=y
 # CONFIG_ATL2 is not set
 CONFIG_FS_ENET=y
 CONFIG_FS_ENET_HAS_SCC=y
-# CONFIG_FS_ENET_HAS_FCC is not set
-# CONFIG_FS_ENET_MDIO_FCC is not set
+CONFIG_FS_ENET_HAS_FCC=y
+CONFIG_FS_ENET_MDIO_FCC=y
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
@@ -680,7 +683,68 @@ CONFIG_HW_RANDOM=y
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
 CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+# CONFIG_I2C_POWERMAC is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_CPM=y
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_MPC is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_PCF8575 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
 
 #
@@ -699,6 +763,9 @@ CONFIG_GPIOLIB=y
 #
 # I2C GPIO expanders:
 #
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
 
 #
 # PCI GPIO expanders:
@@ -727,7 +794,14 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
-- 
cgit v1.2.3


From fc4bdb35fba1c8f464fd85b94a5059e752fc85d4 Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@kernel.crashing.org>
Date: Fri, 14 Aug 2009 09:38:34 -0500
Subject: powerpc/booke: Move MMUCSR definition into mmu-book3e.h

The MMUCSR is now defined as part of the Book-3E architecture so we
can move it into mmu-book3e.h and add some of the additional bits
defined by the architecture specs.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/include/asm/mmu-book3e.h | 12 ++++++++++++
 arch/powerpc/include/asm/reg_booke.h  |  6 ------
 arch/powerpc/mm/tlb_nohash_low.S      |  2 --
 3 files changed, 12 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/mmu-book3e.h b/arch/powerpc/include/asm/mmu-book3e.h
index d7458046936..74695816205 100644
--- a/arch/powerpc/include/asm/mmu-book3e.h
+++ b/arch/powerpc/include/asm/mmu-book3e.h
@@ -114,6 +114,18 @@
 
 #define MAS7_RPN		0xFFFFFFFF
 
+/* Bit definitions for MMUCSR0 */
+#define MMUCSR0_TLB1FI	0x00000002	/* TLB1 Flash invalidate */
+#define MMUCSR0_TLB0FI	0x00000004	/* TLB0 Flash invalidate */
+#define MMUCSR0_TLB2FI	0x00000040	/* TLB2 Flash invalidate */
+#define MMUCSR0_TLB3FI	0x00000020	/* TLB3 Flash invalidate */
+#define MMUCSR0_TLBFI	(MMUCSR0_TLB0FI | MMUCSR0_TLB1FI | \
+			 MMUCSR0_TLB2FI | MMUCSR0_TLB3FI)
+#define MMUCSR0_TLB0PS	0x00000780	/* TLB0 Page Size */
+#define MMUCSR0_TLB1PS	0x00007800	/* TLB1 Page Size */
+#define MMUCSR0_TLB2PS	0x00078000	/* TLB2 Page Size */
+#define MMUCSR0_TLB3PS	0x00780000	/* TLB3 Page Size */
+
 /* TLBnCFG encoding */
 #define TLBnCFG_N_ENTRY		0x00000fff	/* number of entries */
 #define TLBnCFG_HES		0x00002000	/* HW select supported */
diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h
index 2c9c706e644..9bb81d99b76 100644
--- a/arch/powerpc/include/asm/reg_booke.h
+++ b/arch/powerpc/include/asm/reg_booke.h
@@ -430,12 +430,6 @@
 #define L2CSR0_L2LOA	0x00000080	/* L2 Cache Lock Overflow Allocate */
 #define L2CSR0_L2LO	0x00000020	/* L2 Cache Lock Overflow */
 
-/* Bit definitions for MMUCSR0 */
-#define MMUCSR0_TLB1FI	0x00000002	/* TLB1 Flash invalidate */
-#define MMUCSR0_TLB0FI	0x00000004	/* TLB0 Flash invalidate */
-#define MMUCSR0_TLB2FI	0x00000040	/* TLB2 Flash invalidate */
-#define MMUCSR0_TLB3FI	0x00000020	/* TLB3 Flash invalidate */
-
 /* Bit definitions for SGR. */
 #define SGR_NORMAL	0		/* Speculative fetching allowed. */
 #define SGR_GUARDED	1		/* Speculative fetching disallowed. */
diff --git a/arch/powerpc/mm/tlb_nohash_low.S b/arch/powerpc/mm/tlb_nohash_low.S
index 7bcd9fbf6cc..bbdc5b577b8 100644
--- a/arch/powerpc/mm/tlb_nohash_low.S
+++ b/arch/powerpc/mm/tlb_nohash_low.S
@@ -124,8 +124,6 @@ _GLOBAL(_tlbil_pid)
  * to have the larger code path before the _SECTION_ELSE
  */
 
-#define MMUCSR0_TLBFI	(MMUCSR0_TLB0FI | MMUCSR0_TLB1FI | \
-			 MMUCSR0_TLB2FI | MMUCSR0_TLB3FI)
 /*
  * Flush MMU TLB on the local processor
  */
-- 
cgit v1.2.3


From fb8e3e1fe1df963b6c1ab8610682737ccae96ef0 Mon Sep 17 00:00:00 2001
From: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Date: Fri, 7 Aug 2009 21:05:16 +0530
Subject: powerpc/85xx: Add support for P2020RDB board

Add support for the P2020RDB reference board from Freescale.

Overview of P2020RDB platform
	- DDR
	  DDR2 1G
	- NOR Flash
	  16MByte
	- NAND Flash
	  32MByte
	- 3 Ethernet interfaces
	  1) etSEC1
		- RGMII
		- connected to a 5 port Vitesse Switch(VSC7385)
		- Switch is memory mapped through eLBC interface(CS#2)
		- IRQ1
	  2) etSEC2
		- SGMII
		- connected to VSC8221
		- IRQ2
	  3) etSEC3
		- RGMII
		- connected to VSC8641
		- IRQ3
	- 2 1X PCIe interfaces
	- SD/MMC ,USB
	- SPI EEPROM
	- Serial I2C EEPROM

Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/boot/dts/p2020rdb.dts        | 586 ++++++++++++++++++++++++++++++
 arch/powerpc/configs/mpc85xx_defconfig    |   1 +
 arch/powerpc/platforms/85xx/Kconfig       |   9 +
 arch/powerpc/platforms/85xx/Makefile      |   3 +-
 arch/powerpc/platforms/85xx/mpc85xx_rdb.c | 141 +++++++
 5 files changed, 739 insertions(+), 1 deletion(-)
 create mode 100644 arch/powerpc/boot/dts/p2020rdb.dts
 create mode 100644 arch/powerpc/platforms/85xx/mpc85xx_rdb.c

(limited to 'arch')

diff --git a/arch/powerpc/boot/dts/p2020rdb.dts b/arch/powerpc/boot/dts/p2020rdb.dts
new file mode 100644
index 00000000000..da4cb0d8d21
--- /dev/null
+++ b/arch/powerpc/boot/dts/p2020rdb.dts
@@ -0,0 +1,586 @@
+/*
+ * P2020 RDB Device Tree Source
+ *
+ * Copyright 2009 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+/ {
+	model = "fsl,P2020";
+	compatible = "fsl,P2020RDB";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+		pci1 = &pci1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,P2020@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+		};
+
+		PowerPC,P2020@1 {
+			device_type = "cpu";
+			reg = <0x1>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	localbus@ffe05000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,p2020-elbc", "fsl,elbc", "simple-bus";
+		reg = <0 0xffe05000 0 0x1000>;
+		interrupts = <19 2>;
+		interrupt-parent = <&mpic>;
+
+		/* NOR and NAND Flashes */
+		ranges = <0x0 0x0 0x0 0xef000000 0x01000000
+			  0x1 0x0 0x0 0xffa00000 0x00040000
+			  0x2 0x0 0x0 0xffb00000 0x00020000>;
+
+		nor@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x1000000>;
+			bank-width = <2>;
+			device-width = <1>;
+
+			partition@0 {
+				/* This location must not be altered  */
+				/* 256KB for Vitesse 7385 Switch firmware */
+				reg = <0x0 0x00040000>;
+				label = "NOR (RO) Vitesse-7385 Firmware";
+				read-only;
+			};
+
+			partition@40000 {
+				/* 256KB for DTB Image */
+				reg = <0x00040000 0x00040000>;
+				label = "NOR (RO) DTB Image";
+				read-only;
+			};
+
+			partition@80000 {
+				/* 3.5 MB for Linux Kernel Image */
+				reg = <0x00080000 0x00380000>;
+				label = "NOR (RO) Linux Kernel Image";
+				read-only;
+			};
+
+			partition@400000 {
+				/* 11MB for JFFS2 based Root file System */
+				reg = <0x00400000 0x00b00000>;
+				label = "NOR (RW) JFFS2 Root File System";
+			};
+
+			partition@f00000 {
+				/* This location must not be altered  */
+				/* 512KB for u-boot Bootloader Image */
+				/* 512KB for u-boot Environment Variables */
+				reg = <0x00f00000 0x00100000>;
+				label = "NOR (RO) U-Boot Image";
+				read-only;
+			};
+		};
+
+		nand@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,p2020-fcm-nand",
+				     "fsl,elbc-fcm-nand";
+			reg = <0x1 0x0 0x40000>;
+
+			partition@0 {
+				/* This location must not be altered  */
+				/* 1MB for u-boot Bootloader Image */
+				reg = <0x0 0x00100000>;
+				label = "NAND (RO) U-Boot Image";
+				read-only;
+			};
+
+			partition@100000 {
+				/* 1MB for DTB Image */
+				reg = <0x00100000 0x00100000>;
+				label = "NAND (RO) DTB Image";
+				read-only;
+			};
+
+			partition@200000 {
+				/* 4MB for Linux Kernel Image */
+				reg = <0x00200000 0x00400000>;
+				label = "NAND (RO) Linux Kernel Image";
+				read-only;
+			};
+
+			partition@600000 {
+				/* 4MB for Compressed Root file System Image */
+				reg = <0x00600000 0x00400000>;
+				label = "NAND (RO) Compressed RFS Image";
+				read-only;
+			};
+
+			partition@a00000 {
+				/* 7MB for JFFS2 based Root file System */
+				reg = <0x00a00000 0x00700000>;
+				label = "NAND (RW) JFFS2 Root File System";
+			};
+
+			partition@1100000 {
+				/* 15MB for JFFS2 based Root file System */
+				reg = <0x01100000 0x00f00000>;
+				label = "NAND (RW) Writable User area";
+			};
+		};
+
+		L2switch@2,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "vitesse-7385";
+			reg = <0x2 0x0 0x20000>;
+		};
+
+	};
+
+	soc@ffe00000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "fsl,p2020-immr", "simple-bus";
+		ranges = <0x0  0x0 0xffe00000 0x100000>;
+		bus-frequency = <0>;		// Filled out by uboot.
+
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <12>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,p2020-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		memory-controller@2000 {
+			compatible = "fsl,p2020-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 2>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+			rtc@68 {
+				compatible = "dallas,ds1339";
+				reg = <0x68>;
+			};
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		spi@7000 {
+			cell-index = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,espi";
+			reg = <0x7000 0x1000>;
+			interrupts = <59 0x2>;
+			interrupt-parent = <&mpic>;
+			mode = "cpu";
+
+			fsl_m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "fsl,espi-flash";
+				reg = <0>;
+				linux,modalias = "fsl_m25p80";
+				modal = "s25sl128b";
+				spi-max-frequency = <50000000>;
+				mode = <0>;
+
+				partition@0 {
+					/* 512KB for u-boot Bootloader Image */
+					reg = <0x0 0x00080000>;
+					label = "SPI (RO) U-Boot Image";
+					read-only;
+				};
+
+				partition@80000 {
+					/* 512KB for DTB Image */
+					reg = <0x00080000 0x00080000>;
+					label = "SPI (RO) DTB Image";
+					read-only;
+				};
+
+				partition@100000 {
+					/* 4MB for Linux Kernel Image */
+					reg = <0x00100000 0x00400000>;
+					label = "SPI (RO) Linux Kernel Image";
+					read-only;
+				};
+
+				partition@500000 {
+					/* 4MB for Compressed RFS Image */
+					reg = <0x00500000 0x00400000>;
+					label = "SPI (RO) Compressed RFS Image";
+					read-only;
+				};
+
+				partition@900000 {
+					/* 7MB for JFFS2 based RFS */
+					reg = <0x00900000 0x00700000>;
+					label = "SPI (RW) JFFS2 RFS";
+				};
+			};
+		};
+
+		dma@c300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,eloplus-dma";
+			reg = <0xc300 0x4>;
+			ranges = <0x0 0xc100 0x200>;
+			cell-index = <1>;
+			dma-channel@0 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <76 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <77 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <78 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <79 2>;
+			};
+		};
+
+		gpio: gpio-controller@f000 {
+			#gpio-cells = <2>;
+			compatible = "fsl,mpc8572-gpio";
+			reg = <0xf000 0x100>;
+			interrupts = <47 0x2>;
+			interrupt-parent = <&mpic>;
+			gpio-controller;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,p2020-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x80000>; // L2,512K
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		usb@22000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl-usb2-dr";
+			reg = <0x22000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <28 0x2>;
+			phy_type = "ulpi";
+		};
+
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <29 2 30 2 34 2>;
+			interrupt-parent = <&mpic>;
+			fixed-link = <1 1 1000 0 0>;
+			phy-connection-type = "rgmii-id";
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+
+				phy0: ethernet-phy@0 {
+					interrupt-parent = <&mpic>;
+					interrupts = <3 1>;
+					reg = <0x0>;
+				};
+				phy1: ethernet-phy@1 {
+					interrupt-parent = <&mpic>;
+					interrupts = <3 1>;
+					reg = <0x1>;
+				};
+			};
+		};
+
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 2 36 2 40 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy0>;
+			phy-connection-type = "sgmii";
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet2: ethernet@26000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <2>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x26000 0x1000>;
+			ranges = <0x0 0x26000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <31 2 32 2 33 2>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy1>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		sdhci@2e000 {
+			compatible = "fsl,p2020-esdhc", "fsl,esdhc";
+			reg = <0x2e000 0x1000>;
+			interrupts = <72 0x2>;
+			interrupt-parent = <&mpic>;
+			/* Filled in by U-Boot */
+			clock-frequency = <0>;
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4",
+				     "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2 58 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0xbfe>;
+			fsl,descriptor-types-mask = <0x3ab0ebf>;
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+		};
+
+		msi@41600 {
+			compatible = "fsl,p2020-msi", "fsl,mpic-msi";
+			reg = <0x41600 0x80>;
+			msi-available-ranges = <0 0x100>;
+			interrupts = <
+				0xe0 0
+				0xe1 0
+				0xe2 0
+				0xe3 0
+				0xe4 0
+				0xe5 0
+				0xe6 0
+				0xe7 0>;
+			interrupt-parent = <&mpic>;
+		};
+
+		global-utilities@e0000 {	//global utilities block
+			compatible = "fsl,p2020-guts";
+			reg = <0xe0000 0x1000>;
+			fsl,has-rstcr;
+		};
+	};
+
+	pci0: pcie@ffe09000 {
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0 0xffe09000 0 0x1000>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc30000 0x0 0x10000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <25 2>;
+		pcie@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@ffe0a000 {
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0 0xffe0a000 0 0x1000>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <26 2>;
+		pcie@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x2000000 0x0 0xc0000000
+				  0x2000000 0x0 0xc0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig
index ada595898af..ee6acc6557f 100644
--- a/arch/powerpc/configs/mpc85xx_defconfig
+++ b/arch/powerpc/configs/mpc85xx_defconfig
@@ -203,6 +203,7 @@ CONFIG_MPC85xx_CDS=y
 CONFIG_MPC85xx_MDS=y
 CONFIG_MPC8536_DS=y
 CONFIG_MPC85xx_DS=y
+CONFIG_MPC85xx_RDB=y
 CONFIG_SOCRATES=y
 CONFIG_KSI8560=y
 # CONFIG_XES_MPC85xx is not set
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index a9b41668897..d3a975e8fd3 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -55,6 +55,15 @@ config MPC85xx_DS
 	help
 	  This option enables support for the MPC85xx DS (MPC8544 DS) board
 
+config MPC85xx_RDB
+	bool "Freescale MPC85xx RDB"
+	select PPC_I8259
+	select DEFAULT_UIMAGE
+	select FSL_ULI1575
+	select SWIOTLB
+	help
+	  This option enables support for the MPC85xx RDB (P2020 RDB) board
+
 config SOCRATES
 	bool "Socrates"
 	select DEFAULT_UIMAGE
diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile
index 835733f2b12..9098aea0cf3 100644
--- a/arch/powerpc/platforms/85xx/Makefile
+++ b/arch/powerpc/platforms/85xx/Makefile
@@ -9,10 +9,11 @@ obj-$(CONFIG_MPC85xx_CDS) += mpc85xx_cds.o
 obj-$(CONFIG_MPC8536_DS)  += mpc8536_ds.o
 obj-$(CONFIG_MPC85xx_DS)  += mpc85xx_ds.o
 obj-$(CONFIG_MPC85xx_MDS) += mpc85xx_mds.o
+obj-$(CONFIG_MPC85xx_RDB) += mpc85xx_rdb.o
 obj-$(CONFIG_STX_GP3)	  += stx_gp3.o
 obj-$(CONFIG_TQM85xx)	  += tqm85xx.o
 obj-$(CONFIG_SBC8560)     += sbc8560.o
 obj-$(CONFIG_SBC8548)     += sbc8548.o
 obj-$(CONFIG_SOCRATES)    += socrates.o socrates_fpga_pic.o
 obj-$(CONFIG_KSI8560)	  += ksi8560.o
-obj-$(CONFIG_XES_MPC85xx) += xes_mpc85xx.o
\ No newline at end of file
+obj-$(CONFIG_XES_MPC85xx) += xes_mpc85xx.o
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
new file mode 100644
index 00000000000..c8468de4acf
--- /dev/null
+++ b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
@@ -0,0 +1,141 @@
+/*
+ * MPC85xx RDB Board Setup
+ *
+ * Copyright 2009 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/interrupt.h>
+#include <linux/of_platform.h>
+
+#include <asm/system.h>
+#include <asm/time.h>
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <mm/mmu_decl.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <asm/mpic.h>
+
+#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG(fmt, args...) printk(KERN_ERR "%s: " fmt, __func__, ## args)
+#else
+#define DBG(fmt, args...)
+#endif
+
+
+void __init mpc85xx_rdb_pic_init(void)
+{
+	struct mpic *mpic;
+	struct resource r;
+	struct device_node *np;
+
+	np = of_find_node_by_type(NULL, "open-pic");
+	if (np == NULL) {
+		printk(KERN_ERR "Could not find open-pic node\n");
+		return;
+	}
+
+	if (of_address_to_resource(np, 0, &r)) {
+		printk(KERN_ERR "Failed to map mpic register space\n");
+		of_node_put(np);
+		return;
+	}
+
+	mpic = mpic_alloc(np, r.start,
+		  MPIC_PRIMARY | MPIC_WANTS_RESET |
+		  MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS |
+		  MPIC_SINGLE_DEST_CPU,
+		  0, 256, " OpenPIC  ");
+
+	BUG_ON(mpic == NULL);
+	of_node_put(np);
+
+	mpic_init(mpic);
+
+}
+
+/*
+ * Setup the architecture
+ */
+#ifdef CONFIG_SMP
+extern void __init mpc85xx_smp_init(void);
+#endif
+static void __init mpc85xx_rdb_setup_arch(void)
+{
+#ifdef CONFIG_PCI
+	struct device_node *np;
+#endif
+
+	if (ppc_md.progress)
+		ppc_md.progress("mpc85xx_rdb_setup_arch()", 0);
+
+#ifdef CONFIG_PCI
+	for_each_node_by_type(np, "pci") {
+		if (of_device_is_compatible(np, "fsl,mpc8548-pcie"))
+			fsl_add_bridge(np, 0);
+	}
+
+#endif
+
+#ifdef CONFIG_SMP
+	mpc85xx_smp_init();
+#endif
+
+	printk(KERN_INFO "MPC85xx RDB board from Freescale Semiconductor\n");
+}
+
+static struct of_device_id __initdata mpc85xxrdb_ids[] = {
+	{ .type = "soc", },
+	{ .compatible = "soc", },
+	{ .compatible = "simple-bus", },
+	{ .compatible = "gianfar", },
+	{},
+};
+
+static int __init mpc85xxrdb_publish_devices(void)
+{
+	return of_platform_bus_probe(NULL, mpc85xxrdb_ids, NULL);
+}
+machine_device_initcall(p2020_rdb, mpc85xxrdb_publish_devices);
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init p2020_rdb_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	if (of_flat_dt_is_compatible(root, "fsl,P2020RDB"))
+		return 1;
+	return 0;
+}
+
+define_machine(p2020_rdb) {
+	.name			= "P2020 RDB",
+	.probe			= p2020_rdb_probe,
+	.setup_arch		= mpc85xx_rdb_setup_arch,
+	.init_IRQ		= mpc85xx_rdb_pic_init,
+#ifdef CONFIG_PCI
+	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+#endif
+	.get_irq		= mpic_get_irq,
+	.restart		= fsl_rstcr_restart,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= udbg_progress,
+};
-- 
cgit v1.2.3


From 4de124446b4d68edd6cb747495234be915d56a29 Mon Sep 17 00:00:00 2001
From: Liang Li <liang.li@windriver.com>
Date: Wed, 12 Aug 2009 09:34:28 -0400
Subject: powerpc/83xx: Remove second USB node from SBC834x DTS

Since only one of the SoC USB devices is brought out to a physical
connector on the board, remove the 2nd (USB-DR) node from the DTS.
Having it present and USB enabled will cause a hang at boot.

Signed-off-by: Liang Li <liang.li@windriver.com>
Signed-off-by: Yang Shi <yang.shi@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/boot/dts/sbc8349.dts | 12 ------------
 1 file changed, 12 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/boot/dts/sbc8349.dts b/arch/powerpc/boot/dts/sbc8349.dts
index 2d9fa68f641..d93e5beab73 100644
--- a/arch/powerpc/boot/dts/sbc8349.dts
+++ b/arch/powerpc/boot/dts/sbc8349.dts
@@ -146,18 +146,6 @@
 			phy_type = "ulpi";
 			port0;
 		};
-		/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
-		usb@23000 {
-			device_type = "usb";
-			compatible = "fsl-usb2-dr";
-			reg = <0x23000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupt-parent = <&ipic>;
-			interrupts = <38 0x8>;
-			dr_mode = "otg";
-			phy_type = "ulpi";
-		};
 
 		enet0: ethernet@24000 {
 			#address-cells = <1>;
-- 
cgit v1.2.3


From 31ff09b7a60bbc80b5df941ec1a12502861b4da9 Mon Sep 17 00:00:00 2001
From: Liang Li <liang.li@windriver.com>
Date: Wed, 12 Aug 2009 09:34:29 -0400
Subject: powerpc/83xx: Add localbus node and MTD partitions for SBC834x

There is 8MB flash, 8kB EEPROM and 128MB SDRAM on the sbc834x
local bus, so add a localbus node in DTS with MTD partitions.

The recent U-boot commit fe613cdd4eb moves u-boot to the beginning
of flash, hence the legacy label on the partition at the end of flash.

Signed-off-by: Liang Li <liang.li@windriver.com>
Signed-off-by: Yang Shi <yang.shi@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/boot/dts/sbc8349.dts | 40 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 40 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/boot/dts/sbc8349.dts b/arch/powerpc/boot/dts/sbc8349.dts
index d93e5beab73..b83036a8d0e 100644
--- a/arch/powerpc/boot/dts/sbc8349.dts
+++ b/arch/powerpc/boot/dts/sbc8349.dts
@@ -265,6 +265,46 @@
 		};
 	};
 
+	localbus@e0005000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8349-localbus", "simple-bus";
+		reg = <0xe0005000 0x1000>;
+		interrupts = <77 0x8>;
+		interrupt-parent = <&ipic>;
+		ranges = <0x0 0x0 0xff800000 0x00800000		/* 8MB Flash */
+			  0x1 0x0 0xf8000000 0x00002000		/* 8KB EEPROM */
+			  0x2 0x0 0x10000000 0x04000000		/* 64MB SDRAM */
+			  0x3 0x0 0x10000000 0x04000000>;	/* 64MB SDRAM */
+
+		flash@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "intel,28F640J3A", "cfi-flash";
+			reg = <0x0 0x0 0x800000>;
+			bank-width = <2>;
+			device-width = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x00000000 0x00040000>;
+				read-only;
+			};
+
+			partition@40000 {
+				label = "user";
+				reg = <0x00040000 0x006c0000>;
+			};
+
+			partition@700000 {
+				label = "legacy u-boot";
+				reg = <0x00700000 0x00100000>;
+				read-only;
+			};
+
+		};
+	};
+
 	pci0: pci@e0008500 {
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
-- 
cgit v1.2.3


From 58dfc497b9357ec00c879b775c02f4eab19bcecb Mon Sep 17 00:00:00 2001
From: Liang Li <liang.li@windriver.com>
Date: Wed, 12 Aug 2009 09:34:30 -0400
Subject: powerpc/83xx: Fix incorrect PCI interrupt map in SBC834x DTS

Allows interrupts to occur on the sbc834x. Currently PCI devices
get assigned an incorrect IRQ and so the interrupt count never
increases. This was tested with the 82546GB based dual port E1000
PCI-X NIC which uses two distinct IRQ lines on the one card.

root@localhost:/root> cat /proc/interrupts | grep eth
17:         78   IPIC   Level     eth1
48:      27121   IPIC   Level     eth0

Signed-off-by: Liang Li <liang.li@windriver.com>
Signed-off-by: Yang Shi <yang.shi@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/boot/dts/sbc8349.dts | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/boot/dts/sbc8349.dts b/arch/powerpc/boot/dts/sbc8349.dts
index b83036a8d0e..0dc90f9bd81 100644
--- a/arch/powerpc/boot/dts/sbc8349.dts
+++ b/arch/powerpc/boot/dts/sbc8349.dts
@@ -310,10 +310,10 @@
 		interrupt-map = <
 
 				/* IDSEL 0x11 */
-				 0x8800 0x0 0x0 0x1 &ipic 20 0x8
-				 0x8800 0x0 0x0 0x2 &ipic 21 0x8
-				 0x8800 0x0 0x0 0x3 &ipic 22 0x8
-				 0x8800 0x0 0x0 0x4 &ipic 23 0x8>;
+				 0x8800 0x0 0x0 0x1 &ipic 48 0x8
+				 0x8800 0x0 0x0 0x2 &ipic 17 0x8
+				 0x8800 0x0 0x0 0x3 &ipic 18 0x8
+				 0x8800 0x0 0x0 0x4 &ipic 19 0x8>;
 
 		interrupt-parent = <&ipic>;
 		interrupts = <0x42 0x8>;
-- 
cgit v1.2.3


From 944ac03804c4c9c0879347098ea458fd57f38687 Mon Sep 17 00:00:00 2001
From: Paul Gortmaker <paul.gortmaker@windriver.com>
Date: Wed, 12 Aug 2009 09:34:31 -0400
Subject: powerpc/83xx: sbc8349 - update defconfig, enable MTD, USB storage

With flash partition entries in the DTS file, MTD might as well
be enabled in the defconfig.  In a similar vein, enable USB and
enough related options (SCSI/ext2/ext3) so that a user can read
and write to a generic USB flash drive as well.

Also, this board only has the two default SOC UARTs, so adjust the
UART config accordingly.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/configs/83xx/sbc834x_defconfig | 320 ++++++++++++++++++++++++++--
 1 file changed, 308 insertions(+), 12 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/configs/83xx/sbc834x_defconfig b/arch/powerpc/configs/83xx/sbc834x_defconfig
index a592b5efdc4..3a68f861b1b 100644
--- a/arch/powerpc/configs/83xx/sbc834x_defconfig
+++ b/arch/powerpc/configs/83xx/sbc834x_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
-# Wed Jul 29 23:32:13 2009
+# Linux kernel version: 2.6.31-rc5
+# Tue Aug 11 19:57:51 2009
 #
 # CONFIG_PPC64 is not set
 
@@ -420,7 +420,90 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
 CONFIG_OF_MDIO=y
@@ -436,6 +519,7 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=32768
@@ -468,9 +552,38 @@ CONFIG_HAVE_IDE=y
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
@@ -578,11 +691,21 @@ CONFIG_GIANFAR=y
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
 #
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -633,9 +756,9 @@ CONFIG_DEVKMEM=y
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_PCI is not set
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
 # CONFIG_SERIAL_8250_EXTENDED is not set
 
 #
@@ -700,6 +823,7 @@ CONFIG_I2C_MPC=y
 #
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
 
 #
 # Graphics adapter I2C/DDC channel drivers
@@ -814,6 +938,11 @@ CONFIG_WATCHDOG=y
 #
 # CONFIG_PCIPCWATCHDOG is not set
 # CONFIG_WDTPCI is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
 #
@@ -856,12 +985,134 @@ CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
 # CONFIG_HID_PID is not set
 
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+
 #
 # Special HID drivers
 #
-# CONFIG_USB_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+CONFIG_USB_EHCI_FSL=y
+CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -882,9 +1133,14 @@ CONFIG_HID=y
 #
 # File systems
 #
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
 # CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
@@ -940,6 +1196,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -977,7 +1234,46 @@ CONFIG_RPCSEC_GSS_KRB5=y
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
 # CONFIG_BINARY_PRINTF is not set
 
-- 
cgit v1.2.3


From 7792da8567a70be3280c8eef916334e6923815e3 Mon Sep 17 00:00:00 2001
From: Liang Li <Liang.Li@windriver.com>
Date: Fri, 14 Aug 2009 10:36:14 -0400
Subject: powerpc/85xx: sbc8560 - Fix warm reboot with board specific reset
 function

The existing fsl_rstcr_restart function is not applicable to the
mpc8560. The Global Utilities Block on this earlier CPU doesn't have
the control/reset register at 0xe00b0.  This implements a board
specific reset function that uses the RCR(Reset Control Register) of
the sbc8560's EPLD to do a reset.

Signed-off-by: Liang Li <Liang.Li@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/platforms/85xx/sbc8560.c | 39 ++++++++++++++++++++++++++++++++++-
 1 file changed, 38 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/platforms/85xx/sbc8560.c b/arch/powerpc/platforms/85xx/sbc8560.c
index cc27807a8b6..a5ad1c7794b 100644
--- a/arch/powerpc/platforms/85xx/sbc8560.c
+++ b/arch/powerpc/platforms/85xx/sbc8560.c
@@ -267,6 +267,43 @@ arch_initcall(sbc8560_rtc_init);
 
 #endif	/* M48T59 */
 
+static __u8 __iomem *brstcr;
+
+static int __init sbc8560_bdrstcr_init(void)
+{
+	struct device_node *np;
+	struct resource res;
+
+	np = of_find_compatible_node(NULL, NULL, "wrs,sbc8560-brstcr");
+	if (np == NULL) {
+		printk(KERN_WARNING "sbc8560: No board specific RSTCR in DTB.\n");
+		return -ENODEV;
+	}
+
+	of_address_to_resource(np, 0, &res);
+
+	printk(KERN_INFO "sbc8560: Found BRSTCR at i/o 0x%x\n", res.start);
+
+	brstcr = ioremap(res.start, res.end - res.start);
+	if(!brstcr)
+		printk(KERN_WARNING "sbc8560: ioremap of brstcr failed.\n");
+
+	of_node_put(np);
+
+	return 0;
+}
+
+arch_initcall(sbc8560_bdrstcr_init);
+
+void sbc8560_rstcr_restart(char * cmd)
+{
+	local_irq_disable();
+	if(brstcr)
+		clrbits8(brstcr, 0x80);
+
+	while(1);
+}
+
 define_machine(sbc8560) {
 	.name			= "SBC8560",
 	.probe			= sbc8560_probe,
@@ -274,7 +311,7 @@ define_machine(sbc8560) {
 	.init_IRQ		= sbc8560_pic_init,
 	.show_cpuinfo		= sbc8560_show_cpuinfo,
 	.get_irq		= mpic_get_irq,
-	.restart		= fsl_rstcr_restart,
+	.restart		= sbc8560_rstcr_restart,
 	.calibrate_decr		= generic_calibrate_decr,
 	.progress		= udbg_progress,
 };
-- 
cgit v1.2.3


From 46c4c229ecf470202a1f4fd2402283cb038864bf Mon Sep 17 00:00:00 2001
From: Paul Gortmaker <paul.gortmaker@windriver.com>
Date: Fri, 14 Aug 2009 12:13:53 -0400
Subject: powerpc/85xx: issue fsl_soc reboot warning only when applicable

Some CPU, like the MPC8560 don't have a RSTCR in the Global
Utilities Block.  These boards will implement their own reboot
call, and not use this code, so we should only warn about the
absence of the GUTS RSTCR when the default reboot code is used.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/sysdev/fsl_soc.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c
index 95dbc643c4f..adca4affcf1 100644
--- a/arch/powerpc/sysdev/fsl_soc.c
+++ b/arch/powerpc/sysdev/fsl_soc.c
@@ -37,6 +37,7 @@
 #include <asm/irq.h>
 #include <asm/time.h>
 #include <asm/prom.h>
+#include <asm/machdep.h>
 #include <sysdev/fsl_soc.h>
 #include <mm/mmu_decl.h>
 #include <asm/cpm2.h>
@@ -383,8 +384,9 @@ static int __init setup_rstcr(void)
 		if (!rstcr)
 			printk (KERN_EMERG "Error: reset control register "
 					"not mapped!\n");
-	} else
-		printk (KERN_INFO "rstcr compatible register does not exist!\n");
+	} else if (ppc_md.restart == fsl_rstcr_restart)
+		printk(KERN_ERR "No RSTCR register, warm reboot won't work\n");
+
 	if (np)
 		of_node_put(np);
 	return 0;
-- 
cgit v1.2.3


From c9c419773d2a84af8ff2f91c859d3d16592c947b Mon Sep 17 00:00:00 2001
From: Paul Gortmaker <paul.gortmaker@windriver.com>
Date: Fri, 14 Aug 2009 12:13:54 -0400
Subject: powerpc/85xx: sbc8560 - remove "has-rstcr" from global utilities
 block

The earlier mpc8560 CPUs don't have the RSTCR at 0xe00b0
in the GUTS.  The generic reboot code uses this tag to
determine if it should be using the RSTCR for reboot, so
remove it from the board definition.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/boot/dts/sbc8560.dts | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/boot/dts/sbc8560.dts b/arch/powerpc/boot/dts/sbc8560.dts
index 239d57a55cf..9e13ed8a119 100644
--- a/arch/powerpc/boot/dts/sbc8560.dts
+++ b/arch/powerpc/boot/dts/sbc8560.dts
@@ -303,7 +303,6 @@
 		global-utilities@e0000 {
 			compatible = "fsl,mpc8560-guts";
 			reg = <0xe0000 0x1000>;
-			fsl,has-rstcr;
 		};
 	};
 
-- 
cgit v1.2.3


From 9b30050908fad96968497e73b88626056ea33c96 Mon Sep 17 00:00:00 2001
From: Jarkko Nikula <jhnikula@gmail.com>
Date: Mon, 24 Aug 2009 17:45:50 +0300
Subject: OMAP: McBSP: Use textual values in DMA operating mode sysfs files

Use more descriptive than numerical value when showing and storing the
McBSP DMA operating mode. Show function is using similar syntax than e.g.
the led triggers so that all possible values for store function are
printed but with current value surrounded with square brackets.

Signed-off-by: Jarkko Nikula <jhnikula@gmail.com>
Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Acked-by: Eduardo Valentin <eduardo.valentin@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 arch/arm/plat-omap/mcbsp.c | 48 ++++++++++++++++++++++++----------------------
 1 file changed, 25 insertions(+), 23 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index b63a7209b41..ee60ab68251 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -1161,25 +1161,31 @@ static DEVICE_ATTR(prop, 0644, prop##_show, prop##_store);
 THRESHOLD_PROP_BUILDER(max_tx_thres);
 THRESHOLD_PROP_BUILDER(max_rx_thres);
 
+static const char *dma_op_modes[] = {
+	"element", "threshold", "frame",
+};
+
 static ssize_t dma_op_mode_show(struct device *dev,
 			struct device_attribute *attr, char *buf)
 {
 	struct omap_mcbsp *mcbsp = dev_get_drvdata(dev);
-	int dma_op_mode;
+	int dma_op_mode, i = 0;
+	ssize_t len = 0;
+	const char * const *s;
 
 	spin_lock_irq(&mcbsp->lock);
 	dma_op_mode = mcbsp->dma_op_mode;
 	spin_unlock_irq(&mcbsp->lock);
 
-	return sprintf(buf, "current mode: %d\n"
-			"possible mode values are:\n"
-			"%d - %s\n"
-			"%d - %s\n"
-			"%d - %s\n",
-			dma_op_mode,
-			MCBSP_DMA_MODE_ELEMENT, "element mode",
-			MCBSP_DMA_MODE_THRESHOLD, "threshold mode",
-			MCBSP_DMA_MODE_FRAME, "frame mode");
+	for (s = &dma_op_modes[i]; i < ARRAY_SIZE(dma_op_modes); s++, i++) {
+		if (dma_op_mode == i)
+			len += sprintf(buf + len, "[%s] ", *s);
+		else
+			len += sprintf(buf + len, "%s ", *s);
+	}
+	len += sprintf(buf + len, "\n");
+
+	return len;
 }
 
 static ssize_t dma_op_mode_store(struct device *dev,
@@ -1187,26 +1193,22 @@ static ssize_t dma_op_mode_store(struct device *dev,
 				const char *buf, size_t size)
 {
 	struct omap_mcbsp *mcbsp = dev_get_drvdata(dev);
-	unsigned long val;
-	int status;
+	const char * const *s;
+	int i = 0;
 
-	status = strict_strtoul(buf, 0, &val);
-	if (status)
-		return status;
+	for (s = &dma_op_modes[i]; i < ARRAY_SIZE(dma_op_modes); s++, i++)
+		if (sysfs_streq(buf, *s))
+			break;
 
-	spin_lock_irq(&mcbsp->lock);
+	if (i == ARRAY_SIZE(dma_op_modes))
+		return -EINVAL;
 
+	spin_lock_irq(&mcbsp->lock);
 	if (!mcbsp->free) {
 		size = -EBUSY;
 		goto unlock;
 	}
-
-	if (val > MCBSP_DMA_MODE_FRAME || val < MCBSP_DMA_MODE_ELEMENT) {
-		size = -EINVAL;
-		goto unlock;
-	}
-
-	mcbsp->dma_op_mode = val;
+	mcbsp->dma_op_mode = i;
 
 unlock:
 	spin_unlock_irq(&mcbsp->lock);
-- 
cgit v1.2.3


From d09a2afc9359407114b7062519101f1ee2d05388 Mon Sep 17 00:00:00 2001
From: Jarkko Nikula <jhnikula@gmail.com>
Date: Sun, 23 Aug 2009 12:24:27 +0300
Subject: ARM: OMAP: McBSP: Merge two functions into omap_mcbsp_start/_stop

Functionality of functions omap_mcbsp_xmit_enable and omap_mcbsp_recv_enable
can be merged into omap_mcbsp_start and omap_mcbsp_stop since API of
those omap_mcbsp_start and omap_mcbsp_stop was changed recently allowing
to start and stop individually the transmitter and receiver.

This cleans up the code in arch/arm/plat-omap/mcbsp.c and in
sound/soc/omap/omap-mcbsp.c which was the only user for those removed
functions.

Signed-off-by: Jarkko Nikula <jhnikula@gmail.com>
Acked-by: Eero Nurkkala <ext-eero.nurkkala@nokia.com>
Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 arch/arm/plat-omap/include/mach/mcbsp.h |  2 -
 arch/arm/plat-omap/mcbsp.c              | 84 +++++++++++----------------------
 2 files changed, 28 insertions(+), 58 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h
index 70e950e295e..63a3f254af7 100644
--- a/arch/arm/plat-omap/include/mach/mcbsp.h
+++ b/arch/arm/plat-omap/include/mach/mcbsp.h
@@ -436,8 +436,6 @@ int omap_mcbsp_request(unsigned int id);
 void omap_mcbsp_free(unsigned int id);
 void omap_mcbsp_start(unsigned int id, int tx, int rx);
 void omap_mcbsp_stop(unsigned int id, int tx, int rx);
-void omap_mcbsp_xmit_enable(unsigned int id, u8 enable);
-void omap_mcbsp_recv_enable(unsigned int id, u8 enable);
 void omap_mcbsp_xmit_word(unsigned int id, u32 word);
 u32 omap_mcbsp_recv_word(unsigned int id);
 
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index ee60ab68251..8dc7927906f 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -529,11 +529,13 @@ void omap_mcbsp_start(unsigned int id, int tx, int rx)
 	}
 
 	/* Enable transmitter and receiver */
+	tx &= 1;
 	w = OMAP_MCBSP_READ(io_base, SPCR2);
-	OMAP_MCBSP_WRITE(io_base, SPCR2, w | (tx & 1));
+	OMAP_MCBSP_WRITE(io_base, SPCR2, w | tx);
 
+	rx &= 1;
 	w = OMAP_MCBSP_READ(io_base, SPCR1);
-	OMAP_MCBSP_WRITE(io_base, SPCR1, w | (rx & 1));
+	OMAP_MCBSP_WRITE(io_base, SPCR1, w | rx);
 
 	/*
 	 * Worst case: CLKSRG*2 = 8000khz: (1/8000) * 2 * 2 usec
@@ -549,6 +551,16 @@ void omap_mcbsp_start(unsigned int id, int tx, int rx)
 		OMAP_MCBSP_WRITE(io_base, SPCR2, w | (1 << 7));
 	}
 
+	if (cpu_is_omap2430() || cpu_is_omap34xx()) {
+		/* Release the transmitter and receiver */
+		w = OMAP_MCBSP_READ(io_base, XCCR);
+		w &= ~(tx ? XDISABLE : 0);
+		OMAP_MCBSP_WRITE(io_base, XCCR, w);
+		w = OMAP_MCBSP_READ(io_base, RCCR);
+		w &= ~(rx ? RDISABLE : 0);
+		OMAP_MCBSP_WRITE(io_base, RCCR, w);
+	}
+
 	/* Dump McBSP Regs */
 	omap_mcbsp_dump_reg(id);
 }
@@ -570,12 +582,24 @@ void omap_mcbsp_stop(unsigned int id, int tx, int rx)
 	io_base = mcbsp->io_base;
 
 	/* Reset transmitter */
+	tx &= 1;
+	if (cpu_is_omap2430() || cpu_is_omap34xx()) {
+		w = OMAP_MCBSP_READ(io_base, XCCR);
+		w |= (tx ? XDISABLE : 0);
+		OMAP_MCBSP_WRITE(io_base, XCCR, w);
+	}
 	w = OMAP_MCBSP_READ(io_base, SPCR2);
-	OMAP_MCBSP_WRITE(io_base, SPCR2, w & ~(tx & 1));
+	OMAP_MCBSP_WRITE(io_base, SPCR2, w & ~tx);
 
 	/* Reset receiver */
+	rx &= 1;
+	if (cpu_is_omap2430() || cpu_is_omap34xx()) {
+		w = OMAP_MCBSP_READ(io_base, RCCR);
+		w |= (tx ? RDISABLE : 0);
+		OMAP_MCBSP_WRITE(io_base, RCCR, w);
+	}
 	w = OMAP_MCBSP_READ(io_base, SPCR1);
-	OMAP_MCBSP_WRITE(io_base, SPCR1, w & ~(rx & 1));
+	OMAP_MCBSP_WRITE(io_base, SPCR1, w & ~rx);
 
 	idle = !((OMAP_MCBSP_READ(io_base, SPCR2) |
 		  OMAP_MCBSP_READ(io_base, SPCR1)) & 1);
@@ -588,58 +612,6 @@ void omap_mcbsp_stop(unsigned int id, int tx, int rx)
 }
 EXPORT_SYMBOL(omap_mcbsp_stop);
 
-void omap_mcbsp_xmit_enable(unsigned int id, u8 enable)
-{
-	struct omap_mcbsp *mcbsp;
-	void __iomem *io_base;
-	u16 w;
-
-	if (!(cpu_is_omap2430() || cpu_is_omap34xx()))
-		return;
-
-	if (!omap_mcbsp_check_valid_id(id)) {
-		printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
-		return;
-	}
-
-	mcbsp = id_to_mcbsp_ptr(id);
-	io_base = mcbsp->io_base;
-
-	w = OMAP_MCBSP_READ(io_base, XCCR);
-
-	if (enable)
-		OMAP_MCBSP_WRITE(io_base, XCCR, w & ~(XDISABLE));
-	else
-		OMAP_MCBSP_WRITE(io_base, XCCR, w | XDISABLE);
-}
-EXPORT_SYMBOL(omap_mcbsp_xmit_enable);
-
-void omap_mcbsp_recv_enable(unsigned int id, u8 enable)
-{
-	struct omap_mcbsp *mcbsp;
-	void __iomem *io_base;
-	u16 w;
-
-	if (!(cpu_is_omap2430() || cpu_is_omap34xx()))
-		return;
-
-	if (!omap_mcbsp_check_valid_id(id)) {
-		printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
-		return;
-	}
-
-	mcbsp = id_to_mcbsp_ptr(id);
-	io_base = mcbsp->io_base;
-
-	w = OMAP_MCBSP_READ(io_base, RCCR);
-
-	if (enable)
-		OMAP_MCBSP_WRITE(io_base, RCCR, w & ~(RDISABLE));
-	else
-		OMAP_MCBSP_WRITE(io_base, RCCR, w | RDISABLE);
-}
-EXPORT_SYMBOL(omap_mcbsp_recv_enable);
-
 /* polled mcbsp i/o operations */
 int omap_mcbsp_pollwrite(unsigned int id, u16 buf)
 {
-- 
cgit v1.2.3


From 005155b1f626d2b2d7932e4afdf4fead168c6888 Mon Sep 17 00:00:00 2001
From: Roel Kluin <roel.kluin@gmail.com>
Date: Tue, 25 Aug 2009 15:35:12 +0200
Subject: x86: Fix x86_model test in es7000_apic_is_cluster()

For the x86_model to be greater than 6 or less than 12 is
logically always true.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: <stable@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/apic/es7000_32.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/apic/es7000_32.c b/arch/x86/kernel/apic/es7000_32.c
index 69328ac8de9..420f95da7bf 100644
--- a/arch/x86/kernel/apic/es7000_32.c
+++ b/arch/x86/kernel/apic/es7000_32.c
@@ -167,7 +167,7 @@ static int es7000_apic_is_cluster(void)
 {
 	/* MPENTIUMIII */
 	if (boot_cpu_data.x86 == 6 &&
-	    (boot_cpu_data.x86_model >= 7 || boot_cpu_data.x86_model <= 11))
+	    (boot_cpu_data.x86_model >= 7 && boot_cpu_data.x86_model <= 11))
 		return 1;
 
 	return 0;
-- 
cgit v1.2.3


From ec80fb2d89a0a93db46bdc968b6a849be5340531 Mon Sep 17 00:00:00 2001
From: Anton Vorontsov <avorontsov@ru.mvista.com>
Date: Wed, 19 Aug 2009 03:38:18 +0400
Subject: powerpc/85xx: Add eSDHC support for MPC8536DS boards

This patch simply adds sdhci node to the device tree.

We specify clock-frequency manually, so that eSDHC will work without
upgrading U-Boot. Though, that'll only work for default setup (1500
MHz) on new board revisions. For non-default setups, it's recommended
to upgrade U-Boot, since it will fixup clock-frequency automatically.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/boot/dts/mpc8536ds.dts     | 8 ++++++++
 arch/powerpc/boot/dts/mpc8536ds_36b.dts | 8 ++++++++
 2 files changed, 16 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/boot/dts/mpc8536ds.dts b/arch/powerpc/boot/dts/mpc8536ds.dts
index 22caf69e6ef..815cebb2e3e 100644
--- a/arch/powerpc/boot/dts/mpc8536ds.dts
+++ b/arch/powerpc/boot/dts/mpc8536ds.dts
@@ -250,6 +250,14 @@
 			phy_type = "ulpi";
 		};
 
+		sdhci@2e000 {
+			compatible = "fsl,mpc8536-esdhc", "fsl,esdhc";
+			reg = <0x2e000 0x1000>;
+			interrupts = <72 0x2>;
+			interrupt-parent = <&mpic>;
+			clock-frequency = <250000000>;
+		};
+
 		serial0: serial@4500 {
 			cell-index = <0>;
 			device_type = "serial";
diff --git a/arch/powerpc/boot/dts/mpc8536ds_36b.dts b/arch/powerpc/boot/dts/mpc8536ds_36b.dts
index 113ed8b7c89..d95b26021e6 100644
--- a/arch/powerpc/boot/dts/mpc8536ds_36b.dts
+++ b/arch/powerpc/boot/dts/mpc8536ds_36b.dts
@@ -250,6 +250,14 @@
 			phy_type = "ulpi";
 		};
 
+		sdhci@2e000 {
+			compatible = "fsl,mpc8536-esdhc", "fsl,esdhc";
+			reg = <0x2e000 0x1000>;
+			interrupts = <72 0x2>;
+			interrupt-parent = <&mpic>;
+			clock-frequency = <250000000>;
+		};
+
 		serial0: serial@4500 {
 			cell-index = <0>;
 			device_type = "serial";
-- 
cgit v1.2.3


From a70e88bc78d220a506394058d48cedd1c491a256 Mon Sep 17 00:00:00 2001
From: Anton Vorontsov <avorontsov@ru.mvista.com>
Date: Wed, 19 Aug 2009 03:28:10 +0400
Subject: powerpc/82xx: Fix BCSR bits for MPC8272ADS boards

mpc8272_ads.c is using BCSR bits definitions from pq2ads.h, but
according to User's Guide the bits are wrong for MPC8272ADS boards
(I guess definitions from pq2ads should only be used for PQ2FADS
boards).

So, let's introduce our own definitions for MPC8272ADS, and don't
include pq2ads.h.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/platforms/82xx/mpc8272_ads.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/platforms/82xx/mpc8272_ads.c b/arch/powerpc/platforms/82xx/mpc8272_ads.c
index 8054c685d32..67e2184f424 100644
--- a/arch/powerpc/platforms/82xx/mpc8272_ads.c
+++ b/arch/powerpc/platforms/82xx/mpc8272_ads.c
@@ -29,7 +29,6 @@
 #include <sysdev/fsl_soc.h>
 #include <sysdev/cpm2_pic.h>
 
-#include "pq2ads.h"
 #include "pq2.h"
 
 static void __init mpc8272_ads_pic_init(void)
@@ -144,6 +143,13 @@ static void __init mpc8272_ads_setup_arch(void)
 		return;
 	}
 
+#define BCSR1_FETHIEN		0x08000000
+#define BCSR1_FETH_RST		0x04000000
+#define BCSR1_RS232_EN1		0x02000000
+#define BCSR1_RS232_EN2		0x01000000
+#define BCSR3_FETHIEN2		0x10000000
+#define BCSR3_FETH2_RST		0x08000000
+
 	clrbits32(&bcsr[1], BCSR1_RS232_EN1 | BCSR1_RS232_EN2 | BCSR1_FETHIEN);
 	setbits32(&bcsr[1], BCSR1_FETH_RST);
 
-- 
cgit v1.2.3


From 818fcac554397a04987d49e2bd2dfc2d394b265c Mon Sep 17 00:00:00 2001
From: Anton Vorontsov <avorontsov@ru.mvista.com>
Date: Wed, 19 Aug 2009 03:28:17 +0400
Subject: powerpc/82xx: Add CPM USB Gadget support for MPC8272ADS boards

- Add usb node;
- Configure pins and clocks;
- Enable USB function in BCSR.

The support was successfully tested using serial and ethernet gadget
drivers.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/boot/dts/mpc8272ads.dts      |  8 ++++++++
 arch/powerpc/platforms/82xx/mpc8272_ads.c | 14 ++++++++++++++
 2 files changed, 22 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/boot/dts/mpc8272ads.dts b/arch/powerpc/boot/dts/mpc8272ads.dts
index 60f332778e4..e802ebd88cb 100644
--- a/arch/powerpc/boot/dts/mpc8272ads.dts
+++ b/arch/powerpc/boot/dts/mpc8272ads.dts
@@ -173,6 +173,14 @@
 				fsl,cpm-command = <0xce00000>;
 			};
 
+			usb@11b60 {
+				compatible = "fsl,mpc8272-cpm-usb";
+				reg = <0x11b60 0x40 0x8b00 0x100>;
+				interrupts = <11 8>;
+				interrupt-parent = <&PIC>;
+				mode = "peripheral";
+			};
+
 			mdio@10d40 {
 				device_type = "mdio";
 				compatible = "fsl,mpc8272ads-mdio-bitbang",
diff --git a/arch/powerpc/platforms/82xx/mpc8272_ads.c b/arch/powerpc/platforms/82xx/mpc8272_ads.c
index 67e2184f424..30394b409b3 100644
--- a/arch/powerpc/platforms/82xx/mpc8272_ads.c
+++ b/arch/powerpc/platforms/82xx/mpc8272_ads.c
@@ -99,6 +99,15 @@ static struct cpm_pin mpc8272_ads_pins[] = {
 	/* I2C */
 	{3, 14, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_OPENDRAIN},
 	{3, 15, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_OPENDRAIN},
+
+	/* USB */
+	{2, 10, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{2, 11, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{2, 20, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{2, 24, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{3, 23, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{3, 24, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{3, 25, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
 };
 
 static void __init init_ioports(void)
@@ -112,6 +121,8 @@ static void __init init_ioports(void)
 
 	cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_RX);
 	cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_TX);
+	cpm2_clk_setup(CPM_CLK_SCC3, CPM_CLK8, CPM_CLK_RX);
+	cpm2_clk_setup(CPM_CLK_SCC3, CPM_CLK8, CPM_CLK_TX);
 	cpm2_clk_setup(CPM_CLK_SCC4, CPM_BRG4, CPM_CLK_RX);
 	cpm2_clk_setup(CPM_CLK_SCC4, CPM_BRG4, CPM_CLK_TX);
 	cpm2_clk_setup(CPM_CLK_FCC1, CPM_CLK11, CPM_CLK_RX);
@@ -147,6 +158,7 @@ static void __init mpc8272_ads_setup_arch(void)
 #define BCSR1_FETH_RST		0x04000000
 #define BCSR1_RS232_EN1		0x02000000
 #define BCSR1_RS232_EN2		0x01000000
+#define BCSR3_USB_nEN		0x80000000
 #define BCSR3_FETHIEN2		0x10000000
 #define BCSR3_FETH2_RST		0x08000000
 
@@ -156,6 +168,8 @@ static void __init mpc8272_ads_setup_arch(void)
 	clrbits32(&bcsr[3], BCSR3_FETHIEN2);
 	setbits32(&bcsr[3], BCSR3_FETH2_RST);
 
+	clrbits32(&bcsr[3], BCSR3_USB_nEN);
+
 	iounmap(bcsr);
 
 	init_ioports();
-- 
cgit v1.2.3


From 9b9d401b8d11796f4c4bcbcabecfec9f5d85ea25 Mon Sep 17 00:00:00 2001
From: Anton Vorontsov <avorontsov@ru.mvista.com>
Date: Wed, 19 Aug 2009 03:28:21 +0400
Subject: powerpc/85xx: Add QE USB support for MPC8569E-MDS boards

- Add gpio-controller node for BCSR17, it is used to control USB
  speed and VBUS;
- Add timer node for QE GTM, needed for USB host;
- Add usb node itself;
- Add some probing code for BCSR GPIOs.

NOTE: QE USB doesn't work on prototype boards, but should work on
      pilot boards if specs and schematics are correct, though we
      don't have the pilot boards to actually test it.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/boot/dts/mpc8569mds.dts      | 45 +++++++++++++++++++++++++++++++
 arch/powerpc/platforms/85xx/mpc85xx_mds.c |  4 +++
 2 files changed, 49 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/boot/dts/mpc8569mds.dts b/arch/powerpc/boot/dts/mpc8569mds.dts
index 9e4ce99e161..06332d61830 100644
--- a/arch/powerpc/boot/dts/mpc8569mds.dts
+++ b/arch/powerpc/boot/dts/mpc8569mds.dts
@@ -99,8 +99,18 @@
 		};
 
 		bcsr@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
 			compatible = "fsl,mpc8569mds-bcsr";
 			reg = <1 0 0x8000>;
+			ranges = <0 1 0 0x8000>;
+
+			bcsr17: gpio-controller@11 {
+				#gpio-cells = <2>;
+				compatible = "fsl,mpc8569mds-bcsr-gpio";
+				reg = <0x11 0x1>;
+				gpio-controller;
+			};
 		};
 
 		nand@3,0 {
@@ -315,6 +325,14 @@
 				gpio-controller;
 			};
 
+			qe_pio_f: gpio-controller@a0 {
+				#gpio-cells = <2>;
+				compatible = "fsl,mpc8569-qe-pario-bank",
+					     "fsl,mpc8323-qe-pario-bank";
+				reg = <0xa0 0x18>;
+				gpio-controller;
+			};
+
 			pio1: ucc_pin@01 {
 				pio-map = <
 			/* port  pin  dir  open_drain  assignment  has_irq */
@@ -419,6 +437,16 @@
 			interrupt-parent = <&mpic>;
 		};
 
+		timer@440 {
+			compatible = "fsl,mpc8569-qe-gtm",
+				     "fsl,qe-gtm", "fsl,gtm";
+			reg = <0x440 0x40>;
+			interrupts = <12 13 14 15>;
+			interrupt-parent = <&qeic>;
+			/* Filled in by U-Boot */
+			clock-frequency = <0>;
+		};
+
 		spi@4c0 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -446,6 +474,23 @@
 			mode = "cpu";
 		};
 
+		usb@6c0 {
+			compatible = "fsl,mpc8569-qe-usb",
+				     "fsl,mpc8323-qe-usb";
+			reg = <0x6c0 0x40 0x8b00 0x100>;
+			interrupts = <11>;
+			interrupt-parent = <&qeic>;
+			fsl,fullspeed-clock = "clk5";
+			fsl,lowspeed-clock = "brg10";
+			gpios = <&qe_pio_f 3 0   /* USBOE */
+				 &qe_pio_f 4 0   /* USBTP */
+				 &qe_pio_f 5 0   /* USBTN */
+				 &qe_pio_f 6 0   /* USBRP */
+				 &qe_pio_f 8 0   /* USBRN */
+				 &bcsr17   6 0   /* SPEED */
+				 &bcsr17   5 1>; /* POWER */
+		};
+
 		enet0: ucc@2000 {
 			device_type = "network";
 			compatible = "ucc_geth";
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
index bfb32834ab0..20a61d0af33 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -47,6 +47,7 @@
 #include <asm/udbg.h>
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
+#include <sysdev/simple_gpio.h>
 #include <asm/qe.h>
 #include <asm/qe_ic.h>
 #include <asm/mpic.h>
@@ -304,6 +305,9 @@ static struct of_device_id mpc85xx_ids[] = {
 
 static int __init mpc85xx_publish_devices(void)
 {
+	if (machine_is(mpc8569_mds))
+		simple_gpiochip_init("fsl,mpc8569mds-bcsr-gpio");
+
 	/* Publish the QE devices */
 	of_platform_bus_probe(NULL, mpc85xx_ids, NULL);
 
-- 
cgit v1.2.3


From ab94fcf528d127fcb490175512a8910f37e5b346 Mon Sep 17 00:00:00 2001
From: "H. Peter Anvin" <hpa@zytor.com>
Date: Tue, 25 Aug 2009 16:47:16 -0700
Subject: x86: allow "=rm" in native_save_fl()

This is a partial revert of f1f029c7bfbf4ee1918b90a431ab823bed812504.

"=rm" is allowed in this context, because "pop" is explicitly defined
to adjust the stack pointer *before* it evaluates its effective
address, if it has one.  Thus, we do end up writing to the correct
address even if we use an on-stack memory argument.

The original reporter for f1f029c7bfbf4ee1918b90a431ab823bed812504 was
apparently using a broken x86 simulator.

[ Impact: performance ]

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Gabe Black <spamforgabe@umich.edu>
---
 arch/x86/include/asm/irqflags.h | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/irqflags.h b/arch/x86/include/asm/irqflags.h
index c6ccbe7e81a..9e2b952f810 100644
--- a/arch/x86/include/asm/irqflags.h
+++ b/arch/x86/include/asm/irqflags.h
@@ -13,14 +13,13 @@ static inline unsigned long native_save_fl(void)
 	unsigned long flags;
 
 	/*
-	 * Note: this needs to be "=r" not "=rm", because we have the
-	 * stack offset from what gcc expects at the time the "pop" is
-	 * executed, and so a memory reference with respect to the stack
-	 * would end up using the wrong address.
+	 * "=rm" is safe here, because "pop" adjusts the stack before
+	 * it evaluates its effective address -- this is part of the
+	 * documented behavior of the "pop" instruction.
 	 */
 	asm volatile("# __raw_save_flags\n\t"
 		     "pushf ; pop %0"
-		     : "=r" (flags)
+		     : "=rm" (flags)
 		     : /* no input */
 		     : "memory");
 
-- 
cgit v1.2.3


From 1dcd8ffc81e80a170625883f63f6a5db3cd0428d Mon Sep 17 00:00:00 2001
From: Michael Barkowski <michaelbarkowski@ruggedcom.com>
Date: Tue, 18 Aug 2009 17:20:44 -0400
Subject: powerpc/qe_lib: Set gpio data before changing the direction to output

This avoids having a short glitch if the desired initial value is not
the same as what was previously in the data register.

Signed-off-by: Michael Barkowski <michaelbarkowski@ruggedcom.com>
Acked-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/sysdev/qe_lib/gpio.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/sysdev/qe_lib/gpio.c b/arch/powerpc/sysdev/qe_lib/gpio.c
index 3485288dce3..8e7a7767dd5 100644
--- a/arch/powerpc/sysdev/qe_lib/gpio.c
+++ b/arch/powerpc/sysdev/qe_lib/gpio.c
@@ -105,14 +105,14 @@ static int qe_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
 	struct qe_gpio_chip *qe_gc = to_qe_gpio_chip(mm_gc);
 	unsigned long flags;
 
+	qe_gpio_set(gc, gpio, val);
+
 	spin_lock_irqsave(&qe_gc->lock, flags);
 
 	__par_io_config_pin(mm_gc->regs, gpio, QE_PIO_DIR_OUT, 0, 0, 0);
 
 	spin_unlock_irqrestore(&qe_gc->lock, flags);
 
-	qe_gpio_set(gc, gpio, val);
-
 	return 0;
 }
 
-- 
cgit v1.2.3


From 8f3e1df48baf728bbb0f242c9dff9c9d7108218a Mon Sep 17 00:00:00 2001
From: Cyrill Gorcunov <gorcunov@openvz.org>
Date: Mon, 24 Aug 2009 21:53:36 +0400
Subject: x86, ioapic: Define IO_APIC_DEFAULT_PHYS_BASE constant

We already have APIC_DEFAULT_PHYS_BASE so just to be
consistent.

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
LKML-Reference: <20090824175550.927946757@openvz.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/apicdef.h |  3 ++-
 arch/x86/kernel/mpparse.c      | 10 +++++-----
 2 files changed, 7 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/apicdef.h b/arch/x86/include/asm/apicdef.h
index 7ddb36ab933..7386bfa4f4b 100644
--- a/arch/x86/include/asm/apicdef.h
+++ b/arch/x86/include/asm/apicdef.h
@@ -8,7 +8,8 @@
  * Ingo Molnar <mingo@redhat.com>, 1999, 2000
  */
 
-#define	APIC_DEFAULT_PHYS_BASE	0xfee00000
+#define IO_APIC_DEFAULT_PHYS_BASE	0xfec00000
+#define	APIC_DEFAULT_PHYS_BASE		0xfee00000
 
 #define	APIC_ID		0x20
 
diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c
index 651c93b2886..fcd513bf284 100644
--- a/arch/x86/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse.c
@@ -482,11 +482,11 @@ static void __init construct_ioapic_table(int mpc_default_type)
 		MP_bus_info(&bus);
 	}
 
-	ioapic.type = MP_IOAPIC;
-	ioapic.apicid = 2;
-	ioapic.apicver = mpc_default_type > 4 ? 0x10 : 0x01;
-	ioapic.flags = MPC_APIC_USABLE;
-	ioapic.apicaddr = 0xFEC00000;
+	ioapic.type	= MP_IOAPIC;
+	ioapic.apicid	= 2;
+	ioapic.apicver	= mpc_default_type > 4 ? 0x10 : 0x01;
+	ioapic.flags	= MPC_APIC_USABLE;
+	ioapic.apicaddr	= IO_APIC_DEFAULT_PHYS_BASE;
 	MP_ioapic_info(&ioapic);
 
 	/*
-- 
cgit v1.2.3


From ffc438366c2660a6a811b94ba33229bf217f8254 Mon Sep 17 00:00:00 2001
From: Cyrill Gorcunov <gorcunov@openvz.org>
Date: Mon, 24 Aug 2009 21:53:39 +0400
Subject: x86, ioapic: Get rid of needless check and simplify
 ioapic_setup_resources()

alloc_bootmem() already panics on allocation failure. There is
no need to check the result.

Also there is a way to unbind global variable from its body and
use it as a parameter which allow us to simplify
ioapic_init_mappings as well -- "for" cycle already uses
nr_ioapics as a conditional variable and there is no need to
check if ioapic_setup_resources was returning NULL again.

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <20090824175551.493629148@openvz.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/apic/io_apic.c | 26 +++++++++++---------------
 1 file changed, 11 insertions(+), 15 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 2999f3dd588..d836b4d347e 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -4053,7 +4053,7 @@ void __init setup_ioapic_dest(void)
 
 static struct resource *ioapic_resources;
 
-static struct resource * __init ioapic_setup_resources(void)
+static struct resource * __init ioapic_setup_resources(int nr_ioapics)
 {
 	unsigned long n;
 	struct resource *res;
@@ -4069,15 +4069,13 @@ static struct resource * __init ioapic_setup_resources(void)
 	mem = alloc_bootmem(n);
 	res = (void *)mem;
 
-	if (mem != NULL) {
-		mem += sizeof(struct resource) * nr_ioapics;
+	mem += sizeof(struct resource) * nr_ioapics;
 
-		for (i = 0; i < nr_ioapics; i++) {
-			res[i].name = mem;
-			res[i].flags = IORESOURCE_MEM | IORESOURCE_BUSY;
-			sprintf(mem,  "IOAPIC %u", i);
-			mem += IOAPIC_RESOURCE_NAME_SIZE;
-		}
+	for (i = 0; i < nr_ioapics; i++) {
+		res[i].name = mem;
+		res[i].flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+		sprintf(mem,  "IOAPIC %u", i);
+		mem += IOAPIC_RESOURCE_NAME_SIZE;
 	}
 
 	ioapic_resources = res;
@@ -4091,7 +4089,7 @@ void __init ioapic_init_mappings(void)
 	struct resource *ioapic_res;
 	int i;
 
-	ioapic_res = ioapic_setup_resources();
+	ioapic_res = ioapic_setup_resources(nr_ioapics);
 	for (i = 0; i < nr_ioapics; i++) {
 		if (smp_found_config) {
 			ioapic_phys = mp_ioapics[i].apicaddr;
@@ -4120,11 +4118,9 @@ fake_ioapic_page:
 			    __fix_to_virt(idx), ioapic_phys);
 		idx++;
 
-		if (ioapic_res != NULL) {
-			ioapic_res->start = ioapic_phys;
-			ioapic_res->end = ioapic_phys + (4 * 1024) - 1;
-			ioapic_res++;
-		}
+		ioapic_res->start = ioapic_phys;
+		ioapic_res->end = ioapic_phys + (4 * 1024) - 1;
+		ioapic_res++;
 	}
 }
 
-- 
cgit v1.2.3


From 5051fd69773d2d044734b78516317a04d3774871 Mon Sep 17 00:00:00 2001
From: Cyrill Gorcunov <gorcunov@openvz.org>
Date: Mon, 24 Aug 2009 21:53:37 +0400
Subject: x86, e820: Guard against array overflowed in __e820_add_region()

Better to be paranoid against unpredicted nr_map modifications.

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
LKML-Reference: <20090824175551.146070377@openvz.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/e820.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c
index 7271fa33d79..2e5e0faa99b 100644
--- a/arch/x86/kernel/e820.c
+++ b/arch/x86/kernel/e820.c
@@ -115,7 +115,7 @@ static void __init __e820_add_region(struct e820map *e820x, u64 start, u64 size,
 {
 	int x = e820x->nr_map;
 
-	if (x == ARRAY_SIZE(e820x->map)) {
+	if (x >= ARRAY_SIZE(e820x->map)) {
 		printk(KERN_ERR "Ooops! Too many entries in the memory map!\n");
 		return;
 	}
-- 
cgit v1.2.3


From d3a247bfb2c26f5b67367d58af7ad8c2efbbc6c1 Mon Sep 17 00:00:00 2001
From: Cyrill Gorcunov <gorcunov@openvz.org>
Date: Wed, 26 Aug 2009 21:13:24 +0400
Subject: x86, apic: Slim down stack usage in early_init_lapic_mapping()

As far as I see there is no external poking of mp_lapic_addr in
this procedure which could lead to unpredited changes and
require local storage unit for it. Lets use it plain forward.

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <20090826171324.GC4548@lenovo>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/apic/apic.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 3fc3a6c428d..159740decc4 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -1562,8 +1562,6 @@ no_apic:
 #ifdef CONFIG_X86_64
 void __init early_init_lapic_mapping(void)
 {
-	unsigned long phys_addr;
-
 	/*
 	 * If no local APIC can be found then go out
 	 * : it means there is no mpatable and MADT
@@ -1571,11 +1569,9 @@ void __init early_init_lapic_mapping(void)
 	if (!smp_found_config)
 		return;
 
-	phys_addr = mp_lapic_addr;
-
-	set_fixmap_nocache(FIX_APIC_BASE, phys_addr);
+	set_fixmap_nocache(FIX_APIC_BASE, mp_lapic_addr);
 	apic_printk(APIC_VERBOSE, "mapped APIC to %16lx (%16lx)\n",
-		    APIC_BASE, phys_addr);
+		    APIC_BASE, mp_lapic_addr);
 
 	/*
 	 * Fetch the APIC ID of the BSP in case we have a
-- 
cgit v1.2.3


From 5fc517466dd3d0fc6d2a5180ca6792e60344d8be Mon Sep 17 00:00:00 2001
From: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Date: Fri, 10 Jul 2009 09:57:32 -0700
Subject: x86, pat: Keep identity maps consistent with mmaps even when
 pat_disabled

Make reserve_memtype internally take care of pat disabled case and fallback
to default return values.

Remove the specific pat_disabled checks in track_* routines.

Change kernel_map_sync_memtype to sync identity map even when
pat_disabled.

This change ensures that, even for pat_disabled case, we take care of
keeping identity map in sync. Before this patch, in pat disabled case,
ioremap() keeps the identity maps in sync and other APIs like pci and
/dev/mem mmap don't, which is not a very consistent behavior.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/mm/pat.c | 13 +++----------
 1 file changed, 3 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c
index e6718bb2806..d5af2792d2f 100644
--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -339,6 +339,8 @@ int reserve_memtype(u64 start, u64 end, unsigned long req_type,
 		if (new_type) {
 			if (req_type == -1)
 				*new_type = _PAGE_CACHE_WB;
+			else if (req_type == _PAGE_CACHE_WC)
+				*new_type = _PAGE_CACHE_UC_MINUS;
 			else
 				*new_type = req_type & _PAGE_CACHE_MASK;
 		}
@@ -577,7 +579,7 @@ int kernel_map_sync_memtype(u64 base, unsigned long size, unsigned long flags)
 {
 	unsigned long id_sz;
 
-	if (!pat_enabled || base >= __pa(high_memory))
+	if (base >= __pa(high_memory))
 		return 0;
 
 	id_sz = (__pa(high_memory) < base + size) ?
@@ -677,9 +679,6 @@ int track_pfn_vma_copy(struct vm_area_struct *vma)
 	unsigned long vma_size = vma->vm_end - vma->vm_start;
 	pgprot_t pgprot;
 
-	if (!pat_enabled)
-		return 0;
-
 	/*
 	 * For now, only handle remap_pfn_range() vmas where
 	 * is_linear_pfn_mapping() == TRUE. Handling of
@@ -715,9 +714,6 @@ int track_pfn_vma_new(struct vm_area_struct *vma, pgprot_t *prot,
 	resource_size_t paddr;
 	unsigned long vma_size = vma->vm_end - vma->vm_start;
 
-	if (!pat_enabled)
-		return 0;
-
 	/*
 	 * For now, only handle remap_pfn_range() vmas where
 	 * is_linear_pfn_mapping() == TRUE. Handling of
@@ -743,9 +739,6 @@ void untrack_pfn_vma(struct vm_area_struct *vma, unsigned long pfn,
 	resource_size_t paddr;
 	unsigned long vma_size = vma->vm_end - vma->vm_start;
 
-	if (!pat_enabled)
-		return;
-
 	/*
 	 * For now, only handle remap_pfn_range() vmas where
 	 * is_linear_pfn_mapping() == TRUE. Handling of
-- 
cgit v1.2.3


From 279e669b3fc0068cc3509e8e53036999e1e86588 Mon Sep 17 00:00:00 2001
From: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Date: Fri, 10 Jul 2009 09:57:33 -0700
Subject: x86, pat: ioremap to follow same PAT restrictions as other PAT users

ioremap has this hard-coded check for new type and requested type. That
check differs from other PAT users like /dev/mem mmap, remap_pfn_range
in only one condition where requested type is UC_MINUS and new type
is WC. Under that condition, ioremap fails. But other PAT interfaces succeed
with a WC mapping.

Change to make ioremap be in sync with other PAT APIs and use the same
macro as others. Also changes the error print to KERN_ERR instead of
pr_debug.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/mm/ioremap.c | 17 +++--------------
 1 file changed, 3 insertions(+), 14 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c
index 8a450930834..aeaea8c5b2f 100644
--- a/arch/x86/mm/ioremap.c
+++ b/arch/x86/mm/ioremap.c
@@ -228,24 +228,13 @@ static void __iomem *__ioremap_caller(resource_size_t phys_addr,
 	retval = reserve_memtype(phys_addr, (u64)phys_addr + size,
 						prot_val, &new_prot_val);
 	if (retval) {
-		pr_debug("Warning: reserve_memtype returned %d\n", retval);
+		printk(KERN_ERR "ioremap reserve_memtype failed %d\n", retval);
 		return NULL;
 	}
 
 	if (prot_val != new_prot_val) {
-		/*
-		 * Do not fallback to certain memory types with certain
-		 * requested type:
-		 * - request is uc-, return cannot be write-back
-		 * - request is uc-, return cannot be write-combine
-		 * - request is write-combine, return cannot be write-back
-		 */
-		if ((prot_val == _PAGE_CACHE_UC_MINUS &&
-		     (new_prot_val == _PAGE_CACHE_WB ||
-		      new_prot_val == _PAGE_CACHE_WC)) ||
-		    (prot_val == _PAGE_CACHE_WC &&
-		     new_prot_val == _PAGE_CACHE_WB)) {
-			pr_debug(
+		if (!is_new_memtype_allowed(prot_val, new_prot_val)) {
+			printk(KERN_ERR
 		"ioremap error for 0x%llx-0x%llx, requested 0x%lx, got 0x%lx\n",
 				(unsigned long long)phys_addr,
 				(unsigned long long)(phys_addr + size),
-- 
cgit v1.2.3


From 9fd126bc742f74a95d2ba610247712ff05da02fe Mon Sep 17 00:00:00 2001
From: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Date: Fri, 10 Jul 2009 09:57:34 -0700
Subject: x86, pat: New i/f for driver to request memtype for IO regions

Add new routines to request memtype for IO regions. This will currently
be a backend for io_mapping_* routines. But, it can also be made available
to drivers directly in future, in case it is needed.

reserve interface reserves the memory, makes sure we have a compatible
memory type available and keeps the identity map in sync when needed.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/include/asm/pat.h |  5 +++++
 arch/x86/mm/pat.c          | 49 ++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 54 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/include/asm/pat.h b/arch/x86/include/asm/pat.h
index 7af14e512f9..e2c1668dde7 100644
--- a/arch/x86/include/asm/pat.h
+++ b/arch/x86/include/asm/pat.h
@@ -19,4 +19,9 @@ extern int free_memtype(u64 start, u64 end);
 extern int kernel_map_sync_memtype(u64 base, unsigned long size,
 		unsigned long flag);
 
+int io_reserve_memtype(resource_size_t start, resource_size_t end,
+			unsigned long *type);
+
+void io_free_memtype(resource_size_t start, resource_size_t end);
+
 #endif /* _ASM_X86_PAT_H */
diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c
index d5af2792d2f..82d097ce309 100644
--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -498,6 +498,55 @@ int free_memtype(u64 start, u64 end)
 }
 
 
+/**
+ * io_reserve_memtype - Request a memory type mapping for a region of memory
+ * @start: start (physical address) of the region
+ * @end: end (physical address) of the region
+ * @type: A pointer to memtype, with requested type. On success, requested
+ * or any other compatible type that was available for the region is returned
+ *
+ * On success, returns 0
+ * On failure, returns non-zero
+ */
+int io_reserve_memtype(resource_size_t start, resource_size_t end,
+			unsigned long *type)
+{
+	unsigned long req_type = *type;
+	unsigned long new_type;
+	int ret;
+
+	WARN_ON_ONCE(iomem_map_sanity_check(start, end - start));
+
+	ret = reserve_memtype(start, end, req_type, &new_type);
+	if (ret)
+		goto out_err;
+
+	if (!is_new_memtype_allowed(req_type, new_type))
+		goto out_free;
+
+	if (kernel_map_sync_memtype(start, end - start, new_type) < 0)
+		goto out_free;
+
+	*type = new_type;
+	return 0;
+
+out_free:
+	free_memtype(start, end);
+	ret = -EBUSY;
+out_err:
+	return ret;
+}
+
+/**
+ * io_free_memtype - Release a memory type mapping for a region of memory
+ * @start: start (physical address) of the region
+ * @end: end (physical address) of the region
+ */
+void io_free_memtype(resource_size_t start, resource_size_t end)
+{
+	free_memtype(start, end);
+}
+
 pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
 				unsigned long size, pgprot_t vma_prot)
 {
-- 
cgit v1.2.3


From 9e36fda0b359d2a6ae039c3d7e71a04502a77898 Mon Sep 17 00:00:00 2001
From: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Date: Fri, 10 Jul 2009 09:57:35 -0700
Subject: x86, pat: Add PAT reserve free to io_mapping* APIs

io_mapping_* interfaces were added, mainly for graphics drivers.
Make this interface go through the PAT reserve/free, instead of
hardcoding WC mapping. This makes sure that there are no
aliases due to unconditional WC setting.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/include/asm/iomap.h |  9 ++++++---
 arch/x86/mm/iomap_32.c       | 27 +++++++++++++++++++++++++--
 2 files changed, 31 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/iomap.h b/arch/x86/include/asm/iomap.h
index 0e9fe1d9d97..f35eb45d657 100644
--- a/arch/x86/include/asm/iomap.h
+++ b/arch/x86/include/asm/iomap.h
@@ -26,13 +26,16 @@
 #include <asm/pgtable.h>
 #include <asm/tlbflush.h>
 
-int
-is_io_mapping_possible(resource_size_t base, unsigned long size);
-
 void *
 iomap_atomic_prot_pfn(unsigned long pfn, enum km_type type, pgprot_t prot);
 
 void
 iounmap_atomic(void *kvaddr, enum km_type type);
 
+int
+iomap_create_wc(resource_size_t base, unsigned long size, pgprot_t *prot);
+
+void
+iomap_free(resource_size_t base, unsigned long size);
+
 #endif /* _ASM_X86_IOMAP_H */
diff --git a/arch/x86/mm/iomap_32.c b/arch/x86/mm/iomap_32.c
index fe6f84ca121..84e236ce76b 100644
--- a/arch/x86/mm/iomap_32.c
+++ b/arch/x86/mm/iomap_32.c
@@ -21,7 +21,7 @@
 #include <linux/module.h>
 #include <linux/highmem.h>
 
-int is_io_mapping_possible(resource_size_t base, unsigned long size)
+static int is_io_mapping_possible(resource_size_t base, unsigned long size)
 {
 #if !defined(CONFIG_X86_PAE) && defined(CONFIG_PHYS_ADDR_T_64BIT)
 	/* There is no way to map greater than 1 << 32 address without PAE */
@@ -30,7 +30,30 @@ int is_io_mapping_possible(resource_size_t base, unsigned long size)
 #endif
 	return 1;
 }
-EXPORT_SYMBOL_GPL(is_io_mapping_possible);
+
+int iomap_create_wc(resource_size_t base, unsigned long size, pgprot_t *prot)
+{
+	unsigned long flag = _PAGE_CACHE_WC;
+	int ret;
+
+	if (!is_io_mapping_possible(base, size))
+		return -EINVAL;
+
+	ret = io_reserve_memtype(base, base + size, &flag);
+	if (ret)
+		return ret;
+
+	*prot = __pgprot(__PAGE_KERNEL | flag);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(iomap_create_wc);
+
+void
+iomap_free(resource_size_t base, unsigned long size)
+{
+	io_free_memtype(base, base + size);
+}
+EXPORT_SYMBOL_GPL(iomap_free);
 
 void *kmap_atomic_prot_pfn(unsigned long pfn, enum km_type type, pgprot_t prot)
 {
-- 
cgit v1.2.3


From 335ef896d4c6639849d79367f0fef9abc06d121b Mon Sep 17 00:00:00 2001
From: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Date: Fri, 10 Jul 2009 09:57:36 -0700
Subject: x86, pat: Add rbtree to do quick lookup in memtype tracking

PAT memtype tracking uses a linear link list to keep track of IO
(non-RAM) regions and their memtypes. The code used a last_accessed
pointer as a cache to speedup the lookup. As per discussions with
H. Peter Anvin a while back, having a rbtree here will avoid bad
performances in pathological cases where we may end up with huge
linked list. This may not add any noticable performance speedup
in normal case as the number of entires in PAT memtype list tend
to be ~20-30 range. The patch removes the "cached_entry" logic
as with rbtree we have more generic way of speeding up the lookup.

With this patch, we use rbtree to do the quick lookup. We still use
linked list as the memtype range tracked can be of different sizes
and can overlap in different ways. We also keep track of usage counts
with linked list.

Example:
Multiple ioremaps with different sizes
uncached-minus @ 0xfffff00000-0xfffff04000
uncached-minus @ 0xfffff02000-0xfffff03000

And one userlevel mmap and the thread forks a new process
uncached-minus @ 0xbf453000-0xbf454000
uncached-minus @ 0xbf453000-0xbf454000

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/mm/pat.c | 106 +++++++++++++++++++++++++++++++++++++++++++-----------
 1 file changed, 86 insertions(+), 20 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c
index 82d097ce309..c90f2420f56 100644
--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -15,6 +15,7 @@
 #include <linux/gfp.h>
 #include <linux/mm.h>
 #include <linux/fs.h>
+#include <linux/rbtree.h>
 
 #include <asm/cacheflush.h>
 #include <asm/processor.h>
@@ -148,11 +149,10 @@ static char *cattr_name(unsigned long flags)
  * areas). All the aliases have the same cache attributes of course.
  * Zero attributes are represented as holes.
  *
- * Currently the data structure is a list because the number of mappings
- * are expected to be relatively small. If this should be a problem
- * it could be changed to a rbtree or similar.
+ * The data structure is a list that is also organized as an rbtree
+ * sorted on the start address of memtype range.
  *
- * memtype_lock protects the whole list.
+ * memtype_lock protects both the linear list and rbtree.
  */
 
 struct memtype {
@@ -160,11 +160,53 @@ struct memtype {
 	u64			end;
 	unsigned long		type;
 	struct list_head	nd;
+	struct rb_node		rb;
 };
 
+static struct rb_root memtype_rbroot = RB_ROOT;
 static LIST_HEAD(memtype_list);
 static DEFINE_SPINLOCK(memtype_lock);	/* protects memtype list */
 
+static struct memtype *memtype_rb_search(struct rb_root *root, u64 start)
+{
+	struct rb_node *node = root->rb_node;
+	struct memtype *last_lower = NULL;
+
+	while (node) {
+		struct memtype *data = container_of(node, struct memtype, rb);
+
+		if (data->start < start) {
+			last_lower = data;
+			node = node->rb_right;
+		} else if (data->start > start) {
+			node = node->rb_left;
+		} else
+			return data;
+	}
+
+	/* Will return NULL if there is no entry with its start <= start */
+	return last_lower;
+}
+
+static void memtype_rb_insert(struct rb_root *root, struct memtype *data)
+{
+	struct rb_node **new = &(root->rb_node);
+	struct rb_node *parent = NULL;
+
+	while (*new) {
+		struct memtype *this = container_of(*new, struct memtype, rb);
+
+		parent = *new;
+		if (data->start <= this->start)
+			new = &((*new)->rb_left);
+		else if (data->start > this->start)
+			new = &((*new)->rb_right);
+	}
+
+	rb_link_node(&data->rb, parent, new);
+	rb_insert_color(&data->rb, root);
+}
+
 /*
  * Does intersection of PAT memory type and MTRR memory type and returns
  * the resulting memory type as PAT understands it.
@@ -218,9 +260,6 @@ chk_conflict(struct memtype *new, struct memtype *entry, unsigned long *type)
 	return -EBUSY;
 }
 
-static struct memtype *cached_entry;
-static u64 cached_start;
-
 static int pat_pagerange_is_ram(unsigned long start, unsigned long end)
 {
 	int ram_page = 0, not_rampage = 0;
@@ -382,17 +421,19 @@ int reserve_memtype(u64 start, u64 end, unsigned long req_type,
 
 	spin_lock(&memtype_lock);
 
-	if (cached_entry && start >= cached_start)
-		entry = cached_entry;
-	else
+	entry = memtype_rb_search(&memtype_rbroot, new->start);
+	if (likely(entry != NULL)) {
+		/* To work correctly with list_for_each_entry_continue */
+		entry = list_entry(entry->nd.prev, struct memtype, nd);
+	} else {
 		entry = list_entry(&memtype_list, struct memtype, nd);
+	}
 
 	/* Search for existing mapping that overlaps the current range */
 	where = NULL;
 	list_for_each_entry_continue(entry, &memtype_list, nd) {
 		if (end <= entry->start) {
 			where = entry->nd.prev;
-			cached_entry = list_entry(where, struct memtype, nd);
 			break;
 		} else if (start <= entry->start) { /* end > entry->start */
 			err = chk_conflict(new, entry, new_type);
@@ -400,8 +441,6 @@ int reserve_memtype(u64 start, u64 end, unsigned long req_type,
 				dprintk("Overlap at 0x%Lx-0x%Lx\n",
 					entry->start, entry->end);
 				where = entry->nd.prev;
-				cached_entry = list_entry(where,
-							struct memtype, nd);
 			}
 			break;
 		} else if (start < entry->end) { /* start > entry->start */
@@ -409,8 +448,6 @@ int reserve_memtype(u64 start, u64 end, unsigned long req_type,
 			if (!err) {
 				dprintk("Overlap at 0x%Lx-0x%Lx\n",
 					entry->start, entry->end);
-				cached_entry = list_entry(entry->nd.prev,
-							struct memtype, nd);
 
 				/*
 				 * Move to right position in the linked
@@ -438,13 +475,13 @@ int reserve_memtype(u64 start, u64 end, unsigned long req_type,
 		return err;
 	}
 
-	cached_start = start;
-
 	if (where)
 		list_add(&new->nd, where);
 	else
 		list_add_tail(&new->nd, &memtype_list);
 
+	memtype_rb_insert(&memtype_rbroot, new);
+
 	spin_unlock(&memtype_lock);
 
 	dprintk("reserve_memtype added 0x%Lx-0x%Lx, track %s, req %s, ret %s\n",
@@ -456,7 +493,7 @@ int reserve_memtype(u64 start, u64 end, unsigned long req_type,
 
 int free_memtype(u64 start, u64 end)
 {
-	struct memtype *entry;
+	struct memtype *entry, *saved_entry;
 	int err = -EINVAL;
 	int is_range_ram;
 
@@ -474,17 +511,46 @@ int free_memtype(u64 start, u64 end)
 		return -EINVAL;
 
 	spin_lock(&memtype_lock);
+
+	entry = memtype_rb_search(&memtype_rbroot, start);
+	if (unlikely(entry == NULL))
+		goto unlock_ret;
+
+	/*
+	 * Saved entry points to an entry with start same or less than what
+	 * we searched for. Now go through the list in both directions to look
+	 * for the entry that matches with both start and end, with list stored
+	 * in sorted start address
+	 */
+	saved_entry = entry;
 	list_for_each_entry(entry, &memtype_list, nd) {
 		if (entry->start == start && entry->end == end) {
-			if (cached_entry == entry || cached_start == start)
-				cached_entry = NULL;
+			rb_erase(&entry->rb, &memtype_rbroot);
+			list_del(&entry->nd);
+			kfree(entry);
+			err = 0;
+			break;
+		} else if (entry->start > start) {
+			break;
+		}
+	}
+
+	if (!err)
+		goto unlock_ret;
 
+	entry = saved_entry;
+	list_for_each_entry_reverse(entry, &memtype_list, nd) {
+		if (entry->start == start && entry->end == end) {
+			rb_erase(&entry->rb, &memtype_rbroot);
 			list_del(&entry->nd);
 			kfree(entry);
 			err = 0;
 			break;
+		} else if (entry->start < start) {
+			break;
 		}
 	}
+unlock_ret:
 	spin_unlock(&memtype_lock);
 
 	if (err) {
-- 
cgit v1.2.3


From 46cf98cdaef5471926010b5bddf84c44ec177fdd Mon Sep 17 00:00:00 2001
From: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Date: Fri, 10 Jul 2009 09:57:37 -0700
Subject: x86, pat: Generalize the use of page flag PG_uncached

Only IA64 was using PG_uncached as of now. We now intend to use this bit
in x86 as well, to keep track of memory type of those addresses that
have page struct for them. So, generalize the use of that bit across
ia64 and x86.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/ia64/Kconfig | 4 ++++
 arch/x86/Kconfig  | 4 ++++
 2 files changed, 8 insertions(+)

(limited to 'arch')

diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 170042b420d..e6246119932 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -112,6 +112,10 @@ config IA64_UNCACHED_ALLOCATOR
 	bool
 	select GENERIC_ALLOCATOR
 
+config ARCH_USES_PG_UNCACHED
+	def_bool y
+	depends on IA64_UNCACHED_ALLOCATOR
+
 config AUDIT_ARCH
 	bool
 	default y
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index c07f7220590..8e159538219 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -1414,6 +1414,10 @@ config X86_PAT
 
 	  If unsure, say Y.
 
+config ARCH_USES_PG_UNCACHED
+	def_bool y
+	depends on X86_PAT
+
 config EFI
 	bool "EFI runtime service support"
 	depends on ACPI
-- 
cgit v1.2.3


From f58417409603d62f2eb23db4d2cf6853d84a1698 Mon Sep 17 00:00:00 2001
From: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Date: Fri, 10 Jul 2009 09:57:38 -0700
Subject: x86, pat: Use page flags to track memtypes of RAM pages

Change reserve_ram_pages_type and free_ram_pages_type to use 2 page
flags to track UC_MINUS, WC, WB and default types. Previous RAM tracking
just tracked WB or NonWB, which was not complete and did not allow
tracking of RAM fully and there was no way to get the actual type
reserved by looking at the page flags.

We use the memtype_lock spinlock for atomicity in dealing with
memtype tracking in struct page.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/include/asm/cacheflush.h | 54 ++++++++++++++++++++++-
 arch/x86/mm/pat.c                 | 91 +++++++++++++++++++++------------------
 2 files changed, 102 insertions(+), 43 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/cacheflush.h b/arch/x86/include/asm/cacheflush.h
index e55dfc1ad45..b54f6afe7ec 100644
--- a/arch/x86/include/asm/cacheflush.h
+++ b/arch/x86/include/asm/cacheflush.h
@@ -43,8 +43,58 @@ static inline void copy_from_user_page(struct vm_area_struct *vma,
 	memcpy(dst, src, len);
 }
 
-#define PG_non_WB				PG_arch_1
-PAGEFLAG(NonWB, non_WB)
+#define PG_WC				PG_arch_1
+PAGEFLAG(WC, WC)
+
+#ifdef CONFIG_X86_PAT
+/*
+ * X86 PAT uses page flags WC and Uncached together to keep track of
+ * memory type of pages that have backing page struct. X86 PAT supports 3
+ * different memory types, _PAGE_CACHE_WB, _PAGE_CACHE_WC and
+ * _PAGE_CACHE_UC_MINUS and fourth state where page's memory type has not
+ * been changed from its default (value of -1 used to denote this).
+ * Note we do not support _PAGE_CACHE_UC here.
+ *
+ * Caller must hold memtype_lock for atomicity.
+ */
+static inline unsigned long get_page_memtype(struct page *pg)
+{
+	if (!PageUncached(pg) && !PageWC(pg))
+		return -1;
+	else if (!PageUncached(pg) && PageWC(pg))
+		return _PAGE_CACHE_WC;
+	else if (PageUncached(pg) && !PageWC(pg))
+		return _PAGE_CACHE_UC_MINUS;
+	else
+		return _PAGE_CACHE_WB;
+}
+
+static inline void set_page_memtype(struct page *pg, unsigned long memtype)
+{
+	switch (memtype) {
+	case _PAGE_CACHE_WC:
+		ClearPageUncached(pg);
+		SetPageWC(pg);
+		break;
+	case _PAGE_CACHE_UC_MINUS:
+		SetPageUncached(pg);
+		ClearPageWC(pg);
+		break;
+	case _PAGE_CACHE_WB:
+		SetPageUncached(pg);
+		SetPageWC(pg);
+		break;
+	default:
+	case -1:
+		ClearPageUncached(pg);
+		ClearPageWC(pg);
+		break;
+	}
+}
+#else
+static inline unsigned long get_page_memtype(struct page *pg) { return -1; }
+static inline void set_page_memtype(struct page *pg, unsigned long memtype) { }
+#endif
 
 /*
  * The set_memory_* API can be used to change various attributes of a virtual
diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c
index c90f2420f56..1a9d0f07593 100644
--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -288,63 +288,61 @@ static int pat_pagerange_is_ram(unsigned long start, unsigned long end)
 }
 
 /*
- * For RAM pages, mark the pages as non WB memory type using
- * PageNonWB (PG_arch_1). We allow only one set_memory_uc() or
- * set_memory_wc() on a RAM page at a time before marking it as WB again.
- * This is ok, because only one driver will be owning the page and
- * doing set_memory_*() calls.
+ * For RAM pages, we use page flags to mark the pages with appropriate type.
+ * Here we do two pass:
+ * - Find the memtype of all the pages in the range, look for any conflicts
+ * - In case of no conflicts, set the new memtype for pages in the range
  *
- * For now, we use PageNonWB to track that the RAM page is being mapped
- * as non WB. In future, we will have to use one more flag
- * (or some other mechanism in page_struct) to distinguish between
- * UC and WC mapping.
+ * Caller must hold memtype_lock for atomicity.
  */
 static int reserve_ram_pages_type(u64 start, u64 end, unsigned long req_type,
 				  unsigned long *new_type)
 {
 	struct page *page;
-	u64 pfn, end_pfn;
+	u64 pfn;
+
+	if (req_type == _PAGE_CACHE_UC) {
+		/* We do not support strong UC */
+		WARN_ON_ONCE(1);
+		req_type = _PAGE_CACHE_UC_MINUS;
+	}
 
 	for (pfn = (start >> PAGE_SHIFT); pfn < (end >> PAGE_SHIFT); ++pfn) {
-		page = pfn_to_page(pfn);
-		if (page_mapped(page) || PageNonWB(page))
-			goto out;
+		unsigned long type;
 
-		SetPageNonWB(page);
+		page = pfn_to_page(pfn);
+		type = get_page_memtype(page);
+		if (type != -1) {
+			printk(KERN_INFO "reserve_ram_pages_type failed "
+				"0x%Lx-0x%Lx, track 0x%lx, req 0x%lx\n",
+				start, end, type, req_type);
+			if (new_type)
+				*new_type = type;
+
+			return -EBUSY;
+		}
 	}
-	return 0;
 
-out:
-	end_pfn = pfn;
-	for (pfn = (start >> PAGE_SHIFT); pfn < end_pfn; ++pfn) {
+	if (new_type)
+		*new_type = req_type;
+
+	for (pfn = (start >> PAGE_SHIFT); pfn < (end >> PAGE_SHIFT); ++pfn) {
 		page = pfn_to_page(pfn);
-		ClearPageNonWB(page);
+		set_page_memtype(page, req_type);
 	}
-
-	return -EINVAL;
+	return 0;
 }
 
 static int free_ram_pages_type(u64 start, u64 end)
 {
 	struct page *page;
-	u64 pfn, end_pfn;
+	u64 pfn;
 
 	for (pfn = (start >> PAGE_SHIFT); pfn < (end >> PAGE_SHIFT); ++pfn) {
 		page = pfn_to_page(pfn);
-		if (page_mapped(page) || !PageNonWB(page))
-			goto out;
-
-		ClearPageNonWB(page);
+		set_page_memtype(page, -1);
 	}
 	return 0;
-
-out:
-	end_pfn = pfn;
-	for (pfn = (start >> PAGE_SHIFT); pfn < end_pfn; ++pfn) {
-		page = pfn_to_page(pfn);
-		SetPageNonWB(page);
-	}
-	return -EINVAL;
 }
 
 /*
@@ -405,11 +403,16 @@ int reserve_memtype(u64 start, u64 end, unsigned long req_type,
 		*new_type = actual_type;
 
 	is_range_ram = pat_pagerange_is_ram(start, end);
-	if (is_range_ram == 1)
-		return reserve_ram_pages_type(start, end, req_type,
-					      new_type);
-	else if (is_range_ram < 0)
+	if (is_range_ram == 1) {
+
+		spin_lock(&memtype_lock);
+		err = reserve_ram_pages_type(start, end, req_type, new_type);
+		spin_unlock(&memtype_lock);
+
+		return err;
+	} else if (is_range_ram < 0) {
 		return -EINVAL;
+	}
 
 	new  = kmalloc(sizeof(struct memtype), GFP_KERNEL);
 	if (!new)
@@ -505,10 +508,16 @@ int free_memtype(u64 start, u64 end)
 		return 0;
 
 	is_range_ram = pat_pagerange_is_ram(start, end);
-	if (is_range_ram == 1)
-		return free_ram_pages_type(start, end);
-	else if (is_range_ram < 0)
+	if (is_range_ram == 1) {
+
+		spin_lock(&memtype_lock);
+		err = free_ram_pages_type(start, end);
+		spin_unlock(&memtype_lock);
+
+		return err;
+	} else if (is_range_ram < 0) {
 		return -EINVAL;
+	}
 
 	spin_lock(&memtype_lock);
 
-- 
cgit v1.2.3


From 637b86e75f4c255a4446bc0b67ce9d914b9d2d42 Mon Sep 17 00:00:00 2001
From: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Date: Fri, 10 Jul 2009 09:57:39 -0700
Subject: x86, pat: Add lookup_memtype to get the current memtype of a paddr

Add a new routine lookup_memtype() to get the current memtype based on
the PAT reserves and frees.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/mm/pat.c | 45 +++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 45 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c
index 1a9d0f07593..71aa6f7246c 100644
--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -573,6 +573,51 @@ unlock_ret:
 }
 
 
+/**
+ * lookup_memtype - Looksup the memory type for a physical address
+ * @paddr: physical address of which memory type needs to be looked up
+ *
+ * Only to be called when PAT is enabled
+ *
+ * Returns _PAGE_CACHE_WB, _PAGE_CACHE_WC, _PAGE_CACHE_UC_MINUS or
+ * _PAGE_CACHE_UC
+ */
+static unsigned long lookup_memtype(u64 paddr)
+{
+	int rettype = _PAGE_CACHE_WB;
+	struct memtype *entry;
+
+	if (is_ISA_range(paddr, paddr + PAGE_SIZE - 1))
+		return rettype;
+
+	if (pat_pagerange_is_ram(paddr, paddr + PAGE_SIZE)) {
+		struct page *page;
+		spin_lock(&memtype_lock);
+		page = pfn_to_page(paddr >> PAGE_SHIFT);
+		rettype = get_page_memtype(page);
+		spin_unlock(&memtype_lock);
+		/*
+		 * -1 from get_page_memtype() implies RAM page is in its
+		 * default state and not reserved, and hence of type WB
+		 */
+		if (rettype == -1)
+			rettype = _PAGE_CACHE_WB;
+
+		return rettype;
+	}
+
+	spin_lock(&memtype_lock);
+
+	entry = memtype_rb_search(&memtype_rbroot, paddr);
+	if (entry != NULL)
+		rettype = entry->type;
+	else
+		rettype = _PAGE_CACHE_UC_MINUS;
+
+	spin_unlock(&memtype_lock);
+	return rettype;
+}
+
 /**
  * io_reserve_memtype - Request a memory type mapping for a region of memory
  * @start: start (physical address) of the region
-- 
cgit v1.2.3


From 1087637616dd5e96d834164ea462aed6159d039b Mon Sep 17 00:00:00 2001
From: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Date: Fri, 10 Jul 2009 09:57:40 -0700
Subject: x86, pat: Lookup the protection from memtype list on vm_insert_pfn()

Lookup the reserved memtype during vm_insert_pfn and use that memtype
for the new mapping. This takes care or handling of vm_insert_pfn()
interface in track_pfn_vma*/untrack_pfn_vma.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/mm/pat.c | 24 +++++++++---------------
 1 file changed, 9 insertions(+), 15 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c
index 71aa6f7246c..b629f75f73d 100644
--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -848,11 +848,6 @@ int track_pfn_vma_copy(struct vm_area_struct *vma)
 	unsigned long vma_size = vma->vm_end - vma->vm_start;
 	pgprot_t pgprot;
 
-	/*
-	 * For now, only handle remap_pfn_range() vmas where
-	 * is_linear_pfn_mapping() == TRUE. Handling of
-	 * vm_insert_pfn() is TBD.
-	 */
 	if (is_linear_pfn_mapping(vma)) {
 		/*
 		 * reserve the whole chunk covered by vma. We need the
@@ -880,20 +875,24 @@ int track_pfn_vma_copy(struct vm_area_struct *vma)
 int track_pfn_vma_new(struct vm_area_struct *vma, pgprot_t *prot,
 			unsigned long pfn, unsigned long size)
 {
+	unsigned long flags;
 	resource_size_t paddr;
 	unsigned long vma_size = vma->vm_end - vma->vm_start;
 
-	/*
-	 * For now, only handle remap_pfn_range() vmas where
-	 * is_linear_pfn_mapping() == TRUE. Handling of
-	 * vm_insert_pfn() is TBD.
-	 */
 	if (is_linear_pfn_mapping(vma)) {
 		/* reserve the whole chunk starting from vm_pgoff */
 		paddr = (resource_size_t)vma->vm_pgoff << PAGE_SHIFT;
 		return reserve_pfn_range(paddr, vma_size, prot, 0);
 	}
 
+	if (!pat_enabled)
+		return 0;
+
+	/* for vm_insert_pfn and friends, we set prot based on lookup */
+	flags = lookup_memtype(pfn << PAGE_SHIFT);
+	*prot = __pgprot((pgprot_val(vma->vm_page_prot) & (~_PAGE_CACHE_MASK)) |
+			 flags);
+
 	return 0;
 }
 
@@ -908,11 +907,6 @@ void untrack_pfn_vma(struct vm_area_struct *vma, unsigned long pfn,
 	resource_size_t paddr;
 	unsigned long vma_size = vma->vm_end - vma->vm_start;
 
-	/*
-	 * For now, only handle remap_pfn_range() vmas where
-	 * is_linear_pfn_mapping() == TRUE. Handling of
-	 * vm_insert_pfn() is TBD.
-	 */
 	if (is_linear_pfn_mapping(vma)) {
 		/* free the whole chunk starting from vm_pgoff */
 		paddr = (resource_size_t)vma->vm_pgoff << PAGE_SHIFT;
-- 
cgit v1.2.3


From d886c73cd4cf02a71e1650cbcb6176799d78aac1 Mon Sep 17 00:00:00 2001
From: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Date: Fri, 10 Jul 2009 09:57:41 -0700
Subject: x86, pat: Sanity check remap_pfn_range for RAM region

Add sanity check for remap_pfn_range of RAM regions using
lookup_memtype(). Previously, we did not have anyway to get the type of
RAM memory regions as they were tracked using a single bit in
page_struct (WB, nonWB). Now we can get the actual type from page struct
(WB, WC, UC_MINUS) and make sure the requester gets that type.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/mm/pat.c | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c
index b629f75f73d..a6cace0694a 100644
--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -783,11 +783,29 @@ static int reserve_pfn_range(u64 paddr, unsigned long size, pgprot_t *vma_prot,
 	is_ram = pat_pagerange_is_ram(paddr, paddr + size);
 
 	/*
-	 * reserve_pfn_range() doesn't support RAM pages. Maintain the current
-	 * behavior with RAM pages by returning success.
+	 * reserve_pfn_range() for RAM pages. We do not refcount to keep
+	 * track of number of mappings of RAM pages. We can assert that
+	 * the type requested matches the type of first page in the range.
 	 */
-	if (is_ram != 0)
+	if (is_ram) {
+		if (!pat_enabled)
+			return 0;
+
+		flags = lookup_memtype(paddr);
+		if (want_flags != flags) {
+			printk(KERN_WARNING
+			"%s:%d map pfn RAM range req %s for %Lx-%Lx, got %s\n",
+				current->comm, current->pid,
+				cattr_name(want_flags),
+				(unsigned long long)paddr,
+				(unsigned long long)(paddr + size),
+				cattr_name(flags));
+			*vma_prot = __pgprot((pgprot_val(*vma_prot) &
+					      (~_PAGE_CACHE_MASK)) |
+					     flags);
+		}
 		return 0;
+	}
 
 	ret = reserve_memtype(paddr, paddr + size, want_flags, &flags);
 	if (ret)
-- 
cgit v1.2.3


From ea3cc330ac0cd521ff07c7cd432a1848c19a7e92 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Tue, 18 Aug 2009 19:00:34 +0000
Subject: powerpc/mm: Cleanup handling of execute permission

This is an attempt at cleaning up a bit the way we handle execute
permission on powerpc. _PAGE_HWEXEC is gone, _PAGE_EXEC is now only
defined by CPUs that can do something with it, and the myriad of
#ifdef's in the I$/D$ coherency code is reduced to 2 cases that
hopefully should cover everything.

The logic on BookE is a little bit different than what it was though
not by much. Since now, _PAGE_EXEC will be set by the generic code
for executable pages, we need to filter out if they are unclean and
recover it. However, I don't expect the code to be more bloated than
it already was in that area due to that change.

I could boast that this brings proper enforcing of per-page execute
permissions to all BookE and 40x but in fact, we've had that now for
some time as a side effect of my previous rework in that area (and
I didn't even know it :-) We would only enable execute permission if
the page was cache clean and we would only cache clean it if we took
and exec fault. Since we now enforce that the later only work if
VM_EXEC is part of the VMA flags, we de-fact already enforce per-page
execute permissions... Unless I missed something

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/pgtable-ppc32.h |   7 +-
 arch/powerpc/include/asm/pgtable-ppc64.h |   3 +-
 arch/powerpc/include/asm/pte-40x.h       |   2 +-
 arch/powerpc/include/asm/pte-44x.h       |   2 +-
 arch/powerpc/include/asm/pte-8xx.h       |   1 -
 arch/powerpc/include/asm/pte-book3e.h    |  13 +--
 arch/powerpc/include/asm/pte-common.h    |  22 ++--
 arch/powerpc/include/asm/pte-fsl-booke.h |   2 +-
 arch/powerpc/include/asm/pte-hash32.h    |   1 -
 arch/powerpc/kernel/head_44x.S           |   2 +-
 arch/powerpc/kernel/head_fsl_booke.S     |   4 +-
 arch/powerpc/mm/40x_mmu.c                |   4 +-
 arch/powerpc/mm/pgtable.c                | 167 +++++++++++++++++++++----------
 arch/powerpc/mm/pgtable_32.c             |   2 +-
 arch/powerpc/mm/tlb_low_64e.S            |   4 +-
 15 files changed, 149 insertions(+), 87 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/pgtable-ppc32.h b/arch/powerpc/include/asm/pgtable-ppc32.h
index c9ff9d75990..f2c52e25395 100644
--- a/arch/powerpc/include/asm/pgtable-ppc32.h
+++ b/arch/powerpc/include/asm/pgtable-ppc32.h
@@ -186,7 +186,7 @@ static inline unsigned long pte_update(pte_t *p,
 #endif /* !PTE_ATOMIC_UPDATES */
 
 #ifdef CONFIG_44x
-	if ((old & _PAGE_USER) && (old & _PAGE_HWEXEC))
+	if ((old & _PAGE_USER) && (old & _PAGE_EXEC))
 		icache_44x_need_flush = 1;
 #endif
 	return old;
@@ -217,7 +217,7 @@ static inline unsigned long long pte_update(pte_t *p,
 #endif /* !PTE_ATOMIC_UPDATES */
 
 #ifdef CONFIG_44x
-	if ((old & _PAGE_USER) && (old & _PAGE_HWEXEC))
+	if ((old & _PAGE_USER) && (old & _PAGE_EXEC))
 		icache_44x_need_flush = 1;
 #endif
 	return old;
@@ -267,8 +267,7 @@ static inline void huge_ptep_set_wrprotect(struct mm_struct *mm,
 static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry)
 {
 	unsigned long bits = pte_val(entry) &
-		(_PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_RW |
-		 _PAGE_HWEXEC | _PAGE_EXEC);
+		(_PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_RW | _PAGE_EXEC);
 	pte_update(ptep, 0, bits);
 }
 
diff --git a/arch/powerpc/include/asm/pgtable-ppc64.h b/arch/powerpc/include/asm/pgtable-ppc64.h
index 200ec2dfa03..806abe7a3fa 100644
--- a/arch/powerpc/include/asm/pgtable-ppc64.h
+++ b/arch/powerpc/include/asm/pgtable-ppc64.h
@@ -313,8 +313,7 @@ static inline void pte_clear(struct mm_struct *mm, unsigned long addr,
 static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry)
 {
 	unsigned long bits = pte_val(entry) &
-		(_PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_RW |
-		 _PAGE_EXEC | _PAGE_HWEXEC);
+		(_PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_RW | _PAGE_EXEC);
 
 #ifdef PTE_ATOMIC_UPDATES
 	unsigned long old, tmp;
diff --git a/arch/powerpc/include/asm/pte-40x.h b/arch/powerpc/include/asm/pte-40x.h
index 07630faae02..6c3e1f4378d 100644
--- a/arch/powerpc/include/asm/pte-40x.h
+++ b/arch/powerpc/include/asm/pte-40x.h
@@ -46,7 +46,7 @@
 #define	_PAGE_RW	0x040	/* software: Writes permitted */
 #define	_PAGE_DIRTY	0x080	/* software: dirty page */
 #define _PAGE_HWWRITE	0x100	/* hardware: Dirty & RW, set in exception */
-#define _PAGE_HWEXEC	0x200	/* hardware: EX permission */
+#define _PAGE_EXEC	0x200	/* hardware: EX permission */
 #define _PAGE_ACCESSED	0x400	/* software: R: page referenced */
 
 #define _PMD_PRESENT	0x400	/* PMD points to page of PTEs */
diff --git a/arch/powerpc/include/asm/pte-44x.h b/arch/powerpc/include/asm/pte-44x.h
index 37e98bcf83e..4192b9bad90 100644
--- a/arch/powerpc/include/asm/pte-44x.h
+++ b/arch/powerpc/include/asm/pte-44x.h
@@ -78,7 +78,7 @@
 #define _PAGE_PRESENT	0x00000001		/* S: PTE valid */
 #define _PAGE_RW	0x00000002		/* S: Write permission */
 #define _PAGE_FILE	0x00000004		/* S: nonlinear file mapping */
-#define _PAGE_HWEXEC	0x00000004		/* H: Execute permission */
+#define _PAGE_EXEC	0x00000004		/* H: Execute permission */
 #define _PAGE_ACCESSED	0x00000008		/* S: Page referenced */
 #define _PAGE_DIRTY	0x00000010		/* S: Page dirty */
 #define _PAGE_SPECIAL	0x00000020		/* S: Special page */
diff --git a/arch/powerpc/include/asm/pte-8xx.h b/arch/powerpc/include/asm/pte-8xx.h
index 8c6e3125103..94e979718dc 100644
--- a/arch/powerpc/include/asm/pte-8xx.h
+++ b/arch/powerpc/include/asm/pte-8xx.h
@@ -36,7 +36,6 @@
 /* These five software bits must be masked out when the entry is loaded
  * into the TLB.
  */
-#define _PAGE_EXEC	0x0008	/* software: i-cache coherency required */
 #define _PAGE_GUARDED	0x0010	/* software: guarded access */
 #define _PAGE_DIRTY	0x0020	/* software: page changed */
 #define _PAGE_RW	0x0040	/* software: user write access allowed */
diff --git a/arch/powerpc/include/asm/pte-book3e.h b/arch/powerpc/include/asm/pte-book3e.h
index 1d27c77d770..9800565aebb 100644
--- a/arch/powerpc/include/asm/pte-book3e.h
+++ b/arch/powerpc/include/asm/pte-book3e.h
@@ -37,12 +37,13 @@
 #define _PAGE_WRITETHRU	0x800000 /* W: cache write-through */
 
 /* "Higher level" linux bit combinations */
-#define _PAGE_EXEC	_PAGE_BAP_SX /* Can be executed from potentially */
-#define _PAGE_HWEXEC	_PAGE_BAP_UX /* .. and was cache cleaned */
-#define _PAGE_RW	(_PAGE_BAP_SW | _PAGE_BAP_UW) /* User write permission */
-#define _PAGE_KERNEL_RW	(_PAGE_BAP_SW | _PAGE_BAP_SR | _PAGE_DIRTY)
-#define _PAGE_KERNEL_RO	(_PAGE_BAP_SR)
-#define _PAGE_USER	(_PAGE_BAP_UR | _PAGE_BAP_SR) /* Can be read */
+#define _PAGE_EXEC		_PAGE_BAP_UX /* .. and was cache cleaned */
+#define _PAGE_RW		(_PAGE_BAP_SW | _PAGE_BAP_UW) /* User write permission */
+#define _PAGE_KERNEL_RW		(_PAGE_BAP_SW | _PAGE_BAP_SR | _PAGE_DIRTY)
+#define _PAGE_KERNEL_RO		(_PAGE_BAP_SR)
+#define _PAGE_KERNEL_RWX	(_PAGE_BAP_SW | _PAGE_BAP_SR | _PAGE_DIRTY | _PAGE_BAP_SX)
+#define _PAGE_KERNEL_ROX	(_PAGE_BAP_SR | _PAGE_BAP_SX)
+#define _PAGE_USER		(_PAGE_BAP_UR | _PAGE_BAP_SR) /* Can be read */
 
 #define _PAGE_HASHPTE	0
 #define _PAGE_BUSY	0
diff --git a/arch/powerpc/include/asm/pte-common.h b/arch/powerpc/include/asm/pte-common.h
index 8bb6464ba61..c3b65076a26 100644
--- a/arch/powerpc/include/asm/pte-common.h
+++ b/arch/powerpc/include/asm/pte-common.h
@@ -13,9 +13,6 @@
 #ifndef _PAGE_HWWRITE
 #define _PAGE_HWWRITE	0
 #endif
-#ifndef _PAGE_HWEXEC
-#define _PAGE_HWEXEC	0
-#endif
 #ifndef _PAGE_EXEC
 #define _PAGE_EXEC	0
 #endif
@@ -48,10 +45,16 @@
 #define PMD_PAGE_SIZE(pmd)	bad_call_to_PMD_PAGE_SIZE()
 #endif
 #ifndef _PAGE_KERNEL_RO
-#define _PAGE_KERNEL_RO	0
+#define _PAGE_KERNEL_RO		0
+#endif
+#ifndef _PAGE_KERNEL_ROX
+#define _PAGE_KERNEL_ROX	(_PAGE_EXEC)
 #endif
 #ifndef _PAGE_KERNEL_RW
-#define _PAGE_KERNEL_RW	(_PAGE_DIRTY | _PAGE_RW | _PAGE_HWWRITE)
+#define _PAGE_KERNEL_RW		(_PAGE_DIRTY | _PAGE_RW | _PAGE_HWWRITE)
+#endif
+#ifndef _PAGE_KERNEL_RWX
+#define _PAGE_KERNEL_RWX	(_PAGE_DIRTY | _PAGE_RW | _PAGE_HWWRITE | _PAGE_EXEC)
 #endif
 #ifndef _PAGE_HPTEFLAGS
 #define _PAGE_HPTEFLAGS _PAGE_HASHPTE
@@ -96,8 +99,7 @@ extern unsigned long bad_call_to_PMD_PAGE_SIZE(void);
 #define PAGE_PROT_BITS	(_PAGE_GUARDED | _PAGE_COHERENT | _PAGE_NO_CACHE | \
 			 _PAGE_WRITETHRU | _PAGE_ENDIAN | _PAGE_4K_PFN | \
 			 _PAGE_USER | _PAGE_ACCESSED | \
-			 _PAGE_RW | _PAGE_HWWRITE | _PAGE_DIRTY | \
-			 _PAGE_EXEC | _PAGE_HWEXEC)
+			 _PAGE_RW | _PAGE_HWWRITE | _PAGE_DIRTY | _PAGE_EXEC)
 
 /*
  * We define 2 sets of base prot bits, one for basic pages (ie,
@@ -154,11 +156,9 @@ extern unsigned long bad_call_to_PMD_PAGE_SIZE(void);
 				 _PAGE_NO_CACHE)
 #define PAGE_KERNEL_NCG	__pgprot(_PAGE_BASE_NC | _PAGE_KERNEL_RW | \
 				 _PAGE_NO_CACHE | _PAGE_GUARDED)
-#define PAGE_KERNEL_X	__pgprot(_PAGE_BASE | _PAGE_KERNEL_RW | _PAGE_EXEC | \
-				 _PAGE_HWEXEC)
+#define PAGE_KERNEL_X	__pgprot(_PAGE_BASE | _PAGE_KERNEL_RWX)
 #define PAGE_KERNEL_RO	__pgprot(_PAGE_BASE | _PAGE_KERNEL_RO)
-#define PAGE_KERNEL_ROX	__pgprot(_PAGE_BASE | _PAGE_KERNEL_RO | _PAGE_EXEC | \
-				 _PAGE_HWEXEC)
+#define PAGE_KERNEL_ROX	__pgprot(_PAGE_BASE | _PAGE_KERNEL_ROX)
 
 /* Protection used for kernel text. We want the debuggers to be able to
  * set breakpoints anywhere, so don't write protect the kernel text
diff --git a/arch/powerpc/include/asm/pte-fsl-booke.h b/arch/powerpc/include/asm/pte-fsl-booke.h
index 10820f58acf..ce8a9e94ce7 100644
--- a/arch/powerpc/include/asm/pte-fsl-booke.h
+++ b/arch/powerpc/include/asm/pte-fsl-booke.h
@@ -23,7 +23,7 @@
 #define _PAGE_FILE	0x00002	/* S: when !present: nonlinear file mapping */
 #define _PAGE_RW	0x00004	/* S: Write permission (SW) */
 #define _PAGE_DIRTY	0x00008	/* S: Page dirty */
-#define _PAGE_HWEXEC	0x00010	/* H: SX permission */
+#define _PAGE_EXEC	0x00010	/* H: SX permission */
 #define _PAGE_ACCESSED	0x00020	/* S: Page referenced */
 
 #define _PAGE_ENDIAN	0x00040	/* H: E bit */
diff --git a/arch/powerpc/include/asm/pte-hash32.h b/arch/powerpc/include/asm/pte-hash32.h
index 16e571c7f9e..4aad4132d0a 100644
--- a/arch/powerpc/include/asm/pte-hash32.h
+++ b/arch/powerpc/include/asm/pte-hash32.h
@@ -26,7 +26,6 @@
 #define _PAGE_WRITETHRU	0x040	/* W: cache write-through */
 #define _PAGE_DIRTY	0x080	/* C: page changed */
 #define _PAGE_ACCESSED	0x100	/* R: page referenced */
-#define _PAGE_EXEC	0x200	/* software: i-cache coherency required */
 #define _PAGE_RW	0x400	/* software: user write access allowed */
 #define _PAGE_SPECIAL	0x800	/* software: Special page */
 
diff --git a/arch/powerpc/kernel/head_44x.S b/arch/powerpc/kernel/head_44x.S
index 656cfb2d666..711368b993f 100644
--- a/arch/powerpc/kernel/head_44x.S
+++ b/arch/powerpc/kernel/head_44x.S
@@ -497,7 +497,7 @@ tlb_44x_patch_hwater_D:
 	mtspr	SPRN_MMUCR,r12
 
 	/* Make up the required permissions */
-	li	r13,_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_HWEXEC
+	li	r13,_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_EXEC
 
 	/* Compute pgdir/pmd offset */
 	rlwinm 	r12, r10, PPC44x_PGD_OFF_SHIFT, PPC44x_PGD_OFF_MASK_BIT, 29
diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
index eca80482ae7..2c5af525647 100644
--- a/arch/powerpc/kernel/head_fsl_booke.S
+++ b/arch/powerpc/kernel/head_fsl_booke.S
@@ -643,7 +643,7 @@ interrupt_base:
 
 4:
 	/* Make up the required permissions */
-	li	r13,_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_HWEXEC
+	li	r13,_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_EXEC
 
 	FIND_PTE
 	andc.	r13,r13,r11		/* Check permission */
@@ -742,7 +742,7 @@ finish_tlb_load:
 #endif
 	mtspr	SPRN_MAS2, r12
 
-	li	r10, (_PAGE_HWEXEC | _PAGE_PRESENT)
+	li	r10, (_PAGE_EXEC | _PAGE_PRESENT)
 	rlwimi	r10, r11, 31, 29, 29	/* extract _PAGE_DIRTY into SW */
 	and	r12, r11, r10
 	andi.	r10, r11, _PAGE_USER	/* Test for _PAGE_USER */
diff --git a/arch/powerpc/mm/40x_mmu.c b/arch/powerpc/mm/40x_mmu.c
index 29954dc2894..f5e7b9ce63d 100644
--- a/arch/powerpc/mm/40x_mmu.c
+++ b/arch/powerpc/mm/40x_mmu.c
@@ -105,7 +105,7 @@ unsigned long __init mmu_mapin_ram(void)
 
 	while (s >= LARGE_PAGE_SIZE_16M) {
 		pmd_t *pmdp;
-		unsigned long val = p | _PMD_SIZE_16M | _PAGE_HWEXEC | _PAGE_HWWRITE;
+		unsigned long val = p | _PMD_SIZE_16M | _PAGE_EXEC | _PAGE_HWWRITE;
 
 		pmdp = pmd_offset(pud_offset(pgd_offset_k(v), v), v);
 		pmd_val(*pmdp++) = val;
@@ -120,7 +120,7 @@ unsigned long __init mmu_mapin_ram(void)
 
 	while (s >= LARGE_PAGE_SIZE_4M) {
 		pmd_t *pmdp;
-		unsigned long val = p | _PMD_SIZE_4M | _PAGE_HWEXEC | _PAGE_HWWRITE;
+		unsigned long val = p | _PMD_SIZE_4M | _PAGE_EXEC | _PAGE_HWWRITE;
 
 		pmdp = pmd_offset(pud_offset(pgd_offset_k(v), v), v);
 		pmd_val(*pmdp) = val;
diff --git a/arch/powerpc/mm/pgtable.c b/arch/powerpc/mm/pgtable.c
index b6b32487e74..83f1551ec2c 100644
--- a/arch/powerpc/mm/pgtable.c
+++ b/arch/powerpc/mm/pgtable.c
@@ -128,28 +128,6 @@ void pte_free_finish(void)
 
 #endif /* CONFIG_SMP */
 
-/*
- * Handle i/d cache flushing, called from set_pte_at() or ptep_set_access_flags()
- */
-static pte_t do_dcache_icache_coherency(pte_t pte)
-{
-	unsigned long pfn = pte_pfn(pte);
-	struct page *page;
-
-	if (unlikely(!pfn_valid(pfn)))
-		return pte;
-	page = pfn_to_page(pfn);
-
-	if (!PageReserved(page) && !test_bit(PG_arch_1, &page->flags)) {
-		pr_devel("do_dcache_icache_coherency... flushing\n");
-		flush_dcache_icache_page(page);
-		set_bit(PG_arch_1, &page->flags);
-	}
-	else
-		pr_devel("do_dcache_icache_coherency... already clean\n");
-	return __pte(pte_val(pte) | _PAGE_HWEXEC);
-}
-
 static inline int is_exec_fault(void)
 {
 	return current->thread.regs && TRAP(current->thread.regs) == 0x400;
@@ -157,49 +135,139 @@ static inline int is_exec_fault(void)
 
 /* We only try to do i/d cache coherency on stuff that looks like
  * reasonably "normal" PTEs. We currently require a PTE to be present
- * and we avoid _PAGE_SPECIAL and _PAGE_NO_CACHE
+ * and we avoid _PAGE_SPECIAL and _PAGE_NO_CACHE. We also only do that
+ * on userspace PTEs
  */
 static inline int pte_looks_normal(pte_t pte)
 {
 	return (pte_val(pte) &
-		(_PAGE_PRESENT | _PAGE_SPECIAL | _PAGE_NO_CACHE)) ==
-		(_PAGE_PRESENT);
+	    (_PAGE_PRESENT | _PAGE_SPECIAL | _PAGE_NO_CACHE | _PAGE_USER)) ==
+	    (_PAGE_PRESENT | _PAGE_USER);
 }
 
-#if defined(CONFIG_PPC_STD_MMU)
+struct page * maybe_pte_to_page(pte_t pte)
+{
+	unsigned long pfn = pte_pfn(pte);
+	struct page *page;
+
+	if (unlikely(!pfn_valid(pfn)))
+		return NULL;
+	page = pfn_to_page(pfn);
+	if (PageReserved(page))
+		return NULL;
+	return page;
+}
+
+#if defined(CONFIG_PPC_STD_MMU) || _PAGE_EXEC == 0
+
 /* Server-style MMU handles coherency when hashing if HW exec permission
- * is supposed per page (currently 64-bit only). Else, we always flush
- * valid PTEs in set_pte.
+ * is supposed per page (currently 64-bit only). If not, then, we always
+ * flush the cache for valid PTEs in set_pte. Embedded CPU without HW exec
+ * support falls into the same category.
  */
-static inline int pte_need_exec_flush(pte_t pte, int set_pte)
+
+static pte_t set_pte_filter(pte_t pte)
 {
-	return set_pte && pte_looks_normal(pte) &&
-		!(cpu_has_feature(CPU_FTR_COHERENT_ICACHE) ||
-		  cpu_has_feature(CPU_FTR_NOEXECUTE));
+	pte = __pte(pte_val(pte) & ~_PAGE_HPTEFLAGS);
+	if (pte_looks_normal(pte) && !(cpu_has_feature(CPU_FTR_COHERENT_ICACHE) ||
+				       cpu_has_feature(CPU_FTR_NOEXECUTE))) {
+		struct page *pg = maybe_pte_to_page(pte);
+		if (!pg)
+			return pte;
+		if (!test_bit(PG_arch_1, &pg->flags)) {
+			flush_dcache_icache_page(pg);
+			set_bit(PG_arch_1, &pg->flags);
+		}
+	}
+	return pte;
 }
-#elif _PAGE_HWEXEC == 0
-/* Embedded type MMU without HW exec support (8xx only so far), we flush
- * the cache for any present PTE
- */
-static inline int pte_need_exec_flush(pte_t pte, int set_pte)
+
+static pte_t set_access_flags_filter(pte_t pte, struct vm_area_struct *vma,
+				     int dirty)
 {
-	return set_pte && pte_looks_normal(pte);
+	return pte;
 }
-#else
-/* Other embedded CPUs with HW exec support per-page, we flush on exec
- * fault if HWEXEC is not set
+
+#else /* defined(CONFIG_PPC_STD_MMU) || _PAGE_EXEC == 0 */
+
+/* Embedded type MMU with HW exec support. This is a bit more complicated
+ * as we don't have two bits to spare for _PAGE_EXEC and _PAGE_HWEXEC so
+ * instead we "filter out" the exec permission for non clean pages.
  */
-static inline int pte_need_exec_flush(pte_t pte, int set_pte)
+static pte_t set_pte_filter(pte_t pte)
 {
-	return pte_looks_normal(pte) && is_exec_fault() &&
-		!(pte_val(pte) & _PAGE_HWEXEC);
+	struct page *pg;
+
+	/* No exec permission in the first place, move on */
+	if (!(pte_val(pte) & _PAGE_EXEC) || !pte_looks_normal(pte))
+		return pte;
+
+	/* If you set _PAGE_EXEC on weird pages you're on your own */
+	pg = maybe_pte_to_page(pte);
+	if (unlikely(!pg))
+		return pte;
+
+	/* If the page clean, we move on */
+	if (test_bit(PG_arch_1, &pg->flags))
+		return pte;
+
+	/* If it's an exec fault, we flush the cache and make it clean */
+	if (is_exec_fault()) {
+		flush_dcache_icache_page(pg);
+		set_bit(PG_arch_1, &pg->flags);
+		return pte;
+	}
+
+	/* Else, we filter out _PAGE_EXEC */
+	return __pte(pte_val(pte) & ~_PAGE_EXEC);
 }
-#endif
+
+static pte_t set_access_flags_filter(pte_t pte, struct vm_area_struct *vma,
+				     int dirty)
+{
+	struct page *pg;
+
+	/* So here, we only care about exec faults, as we use them
+	 * to recover lost _PAGE_EXEC and perform I$/D$ coherency
+	 * if necessary. Also if _PAGE_EXEC is already set, same deal,
+	 * we just bail out
+	 */
+	if (dirty || (pte_val(pte) & _PAGE_EXEC) || !is_exec_fault())
+		return pte;
+
+#ifdef CONFIG_DEBUG_VM
+	/* So this is an exec fault, _PAGE_EXEC is not set. If it was
+	 * an error we would have bailed out earlier in do_page_fault()
+	 * but let's make sure of it
+	 */
+	if (WARN_ON(!(vma->vm_flags & VM_EXEC)))
+		return pte;
+#endif /* CONFIG_DEBUG_VM */
+
+	/* If you set _PAGE_EXEC on weird pages you're on your own */
+	pg = maybe_pte_to_page(pte);
+	if (unlikely(!pg))
+		goto bail;
+
+	/* If the page is already clean, we move on */
+	if (test_bit(PG_arch_1, &pg->flags))
+		goto bail;
+
+	/* Clean the page and set PG_arch_1 */
+	flush_dcache_icache_page(pg);
+	set_bit(PG_arch_1, &pg->flags);
+
+ bail:
+	return __pte(pte_val(pte) | _PAGE_EXEC);
+}
+
+#endif /* !(defined(CONFIG_PPC_STD_MMU) || _PAGE_EXEC == 0) */
 
 /*
  * set_pte stores a linux PTE into the linux page table.
  */
-void set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pte)
+void set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep,
+		pte_t pte)
 {
 #ifdef CONFIG_DEBUG_VM
 	WARN_ON(pte_present(*ptep));
@@ -208,9 +276,7 @@ void set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pte
 	 * this context might not have been activated yet when this
 	 * is called.
 	 */
-	pte = __pte(pte_val(pte) & ~_PAGE_HPTEFLAGS);
-	if (pte_need_exec_flush(pte, 1))
-		pte = do_dcache_icache_coherency(pte);
+	pte = set_pte_filter(pte);
 
 	/* Perform the setting of the PTE */
 	__set_pte_at(mm, addr, ptep, pte, 0);
@@ -227,8 +293,7 @@ int ptep_set_access_flags(struct vm_area_struct *vma, unsigned long address,
 			  pte_t *ptep, pte_t entry, int dirty)
 {
 	int changed;
-	if (!dirty && pte_need_exec_flush(entry, 0))
-		entry = do_dcache_icache_coherency(entry);
+	entry = set_access_flags_filter(entry, vma, dirty);
 	changed = !pte_same(*(ptep), entry);
 	if (changed) {
 		if (!(vma->vm_flags & VM_HUGETLB))
diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c
index 5422169626b..cb96cb2e17c 100644
--- a/arch/powerpc/mm/pgtable_32.c
+++ b/arch/powerpc/mm/pgtable_32.c
@@ -142,7 +142,7 @@ ioremap_flags(phys_addr_t addr, unsigned long size, unsigned long flags)
 		flags |= _PAGE_DIRTY | _PAGE_HWWRITE;
 
 	/* we don't want to let _PAGE_USER and _PAGE_EXEC leak out */
-	flags &= ~(_PAGE_USER | _PAGE_EXEC | _PAGE_HWEXEC);
+	flags &= ~(_PAGE_USER | _PAGE_EXEC);
 
 	return __ioremap_caller(addr, size, flags, __builtin_return_address(0));
 }
diff --git a/arch/powerpc/mm/tlb_low_64e.S b/arch/powerpc/mm/tlb_low_64e.S
index 10d524ded7b..cd92f62f9cf 100644
--- a/arch/powerpc/mm/tlb_low_64e.S
+++ b/arch/powerpc/mm/tlb_low_64e.S
@@ -133,7 +133,7 @@
 
 	/* We do the user/kernel test for the PID here along with the RW test
 	 */
-	li	r11,_PAGE_PRESENT|_PAGE_HWEXEC	/* Base perm */
+	li	r11,_PAGE_PRESENT|_PAGE_EXEC	/* Base perm */
 	oris	r11,r11,_PAGE_ACCESSED@h
 
 	cmpldi	cr0,r15,0			/* Check for user region */
@@ -256,7 +256,7 @@ normal_tlb_miss_done:
 
 normal_tlb_miss_access_fault:
 	/* We need to check if it was an instruction miss */
-	andi.	r10,r11,_PAGE_HWEXEC
+	andi.	r10,r11,_PAGE_EXEC
 	bne	1f
 	ld	r14,EX_TLB_DEAR(r12)
 	ld	r15,EX_TLB_ESR(r12)
-- 
cgit v1.2.3


From 14d757520a08d09745c3b18bb34addd9bef56e2d Mon Sep 17 00:00:00 2001
From: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Date: Wed, 19 Aug 2009 04:27:53 +0000
Subject: powerpc: Fix __flush_icache_range on 44x

The ptrace POKETEXT interface allows a process to modify the text pages of
a child process being ptraced, usually to insert breakpoints via trap
instructions.  The kernel eventually calls copy_to_user_page, which in turn
calls __flush_icache_range to invalidate the icache lines for the child
process.

However, this function does not work on 44x due to the icache being virtually
indexed.  This was noticed by a breakpoint being triggered after it had been
cleared by ltrace on a 440EPx board.  The convenient solution is to do a
flash invalidate of the icache in the __flush_icache_range function.

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/misc_32.S | 7 +++++++
 1 file changed, 7 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S
index 15f28e0de78..da9c0c4c10f 100644
--- a/arch/powerpc/kernel/misc_32.S
+++ b/arch/powerpc/kernel/misc_32.S
@@ -342,10 +342,17 @@ END_FTR_SECTION_IFSET(CPU_FTR_COHERENT_ICACHE)
 	addi	r3,r3,L1_CACHE_BYTES
 	bdnz	1b
 	sync				/* wait for dcbst's to get to ram */
+#ifndef CONFIG_44x
 	mtctr	r4
 2:	icbi	0,r6
 	addi	r6,r6,L1_CACHE_BYTES
 	bdnz	2b
+#else
+	/* Flash invalidate on 44x because we are passed kmapped addresses and
+	   this doesn't work for userspace pages due to the virtually tagged
+	   icache.  Sigh. */
+	iccci	0, r0
+#endif
 	sync				/* additional sync needed on g4 */
 	isync
 	blr
-- 
cgit v1.2.3


From 6fdc31a2b86cf1f98e3eed896578ad9659eeb0f8 Mon Sep 17 00:00:00 2001
From: Bastian Blank <bastian@waldi.eu.org>
Date: Wed, 12 Aug 2009 23:30:45 +0000
Subject: powerpc: Remove SMP warning from PowerMac cpufreq

On Thu, Aug 13, 2009 at 04:14:58PM +1000, Benjamin Herrenschmidt wrote:
> On Tue, 2009-08-11 at 11:39 +0200, Bastian Blank wrote:
> > This patch just disables this driver on SMP kernels, as it is obviously
> > not supported.
> Why not remove the #error instead ? :-) I don't think it's still
> meaningful, especially since we use the timebase for delays nowadays
> which doesn't depend on the CPU frequency...

Your call. Take this one:

The build of a PowerMac 32bit kernel currently fails with

error: #warning "WARNING, CPUFREQ not recommended on SMP kernels"

Thie patch removes the not longer applicable SMP warning from the
PowerMac cpufreq code.

Signed-off-by: Bastian Blank <waldi@debian.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/platforms/powermac/cpufreq_32.c | 8 --------
 1 file changed, 8 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/platforms/powermac/cpufreq_32.c b/arch/powerpc/platforms/powermac/cpufreq_32.c
index 65c585b8b00..08d94e4cedd 100644
--- a/arch/powerpc/platforms/powermac/cpufreq_32.c
+++ b/arch/powerpc/platforms/powermac/cpufreq_32.c
@@ -44,14 +44,6 @@
  */
 #undef DEBUG_FREQ
 
-/*
- * There is a problem with the core cpufreq code on SMP kernels,
- * it won't recalculate the Bogomips properly
- */
-#ifdef CONFIG_SMP
-#warning "WARNING, CPUFREQ not recommended on SMP kernels"
-#endif
-
 extern void low_choose_7447a_dfs(int dfs);
 extern void low_choose_750fx_pll(int pll);
 extern void low_sleep_handler(void);
-- 
cgit v1.2.3


From 6776426320e151051a16bc7bf86f12d310c9e8ca Mon Sep 17 00:00:00 2001
From: Gautham R Shenoy <ego@in.ibm.com>
Date: Tue, 23 Jun 2009 23:26:37 +0000
Subject: powerpc/pseries: Reduce the polling interval in __cpu_up()

Time time taken for a single cpu online operation on a pseries machine
is as follows:
Dedicated LPAR (POWER6): ~220ms.
Shared LPAR (POWER5)   : ~240ms.

Of this time, approximately 200ms is taken up by __cpu_up(). This is because
we poll every 200ms to check if the new cpu has notified it's presence
through the cpu_callin_map. We repeat this operation until the new cpu sets
the value in cpu_callin_map or 5 seconds elapse, whichever comes earlier.

However, using completion_structs instead of polling loops,
the time taken by the new processor to indicate it's presence has
found to be less than 1ms on pseries. This method however may not
work on all powerpc platforms due to the time-base synchronization code.

Keeping this in mind, we could reduce msleep polling interval from
200ms to 1ms while retaining the 5 second timeout.

With this, the time taken for a cpu online operation changes as follows:
Dedicated LPAR (POWER6): 20-25ms.
Shared LPAR (POWER5)   : 60-80ms.

In both these cases, it was found that the code polls through the loop
only once indicating that 1ms is a reasonable value, atleast on pseries.

The code needs testing on other powerpc platforms.

Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Acked-by: Joel Schopp <jschopp@austin.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/smp.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index 0b47de07302..96f107cc016 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -412,9 +412,8 @@ int __cpuinit __cpu_up(unsigned int cpu)
 		 * CPUs can take much longer to come up in the
 		 * hotplug case.  Wait five seconds.
 		 */
-		for (c = 25; c && !cpu_callin_map[cpu]; c--) {
-			msleep(200);
-		}
+		for (c = 5000; c && !cpu_callin_map[cpu]; c--)
+			msleep(1);
 #endif
 
 	if (!cpu_callin_map[cpu]) {
-- 
cgit v1.2.3


From 762afb7317b1987fa0851135fe4f2947f68c3c2a Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Tue, 4 Aug 2009 19:08:22 +0000
Subject: powerpc: Remove addr_needs_map in struct dma_mapping_ops

This patch adds max_direct_dma_addr to struct dev_archdata to remove
addr_needs_map in struct dma_mapping_ops. It also converts
dma_capable() to use max_direct_dma_addr.

max_direct_dma_addr is initialized in pci_dma_dev_setup_swiotlb(),
called via ppc_md.pci_dma_dev_setup hook.

For further information:
http://marc.info/?t=124719060200001&r=1&w=2

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Becky Bruce <beckyb@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/device.h          |  3 +++
 arch/powerpc/include/asm/dma-mapping.h     |  8 +++----
 arch/powerpc/include/asm/swiotlb.h         |  5 ++---
 arch/powerpc/kernel/dma-swiotlb.c          | 36 +++++++++++++-----------------
 arch/powerpc/platforms/85xx/mpc8536_ds.c   |  1 +
 arch/powerpc/platforms/85xx/mpc85xx_ds.c   |  1 +
 arch/powerpc/platforms/85xx/mpc85xx_mds.c  |  1 +
 arch/powerpc/platforms/86xx/mpc86xx_hpcn.c |  1 +
 8 files changed, 28 insertions(+), 28 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/device.h b/arch/powerpc/include/asm/device.h
index 7d2277cef09..0086f8d46f1 100644
--- a/arch/powerpc/include/asm/device.h
+++ b/arch/powerpc/include/asm/device.h
@@ -16,6 +16,9 @@ struct dev_archdata {
 	/* DMA operations on that device */
 	struct dma_mapping_ops	*dma_ops;
 	void			*dma_data;
+#ifdef CONFIG_SWIOTLB
+	dma_addr_t		max_direct_dma_addr;
+#endif
 };
 
 static inline void dev_archdata_set_node(struct dev_archdata *ad,
diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h
index 0c34371ec49..1765c379138 100644
--- a/arch/powerpc/include/asm/dma-mapping.h
+++ b/arch/powerpc/include/asm/dma-mapping.h
@@ -87,8 +87,6 @@ struct dma_mapping_ops {
 				dma_addr_t dma_address, size_t size,
 				enum dma_data_direction direction,
 				struct dma_attrs *attrs);
-	int		(*addr_needs_map)(struct device *dev, dma_addr_t addr,
-				size_t size);
 #ifdef CONFIG_PPC_NEED_DMA_SYNC_OPS
 	void            (*sync_single_range_for_cpu)(struct device *hwdev,
 				dma_addr_t dma_handle, unsigned long offset,
@@ -426,10 +424,12 @@ static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
 
 static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size)
 {
-	struct dma_mapping_ops *ops = get_dma_ops(dev);
+#ifdef CONFIG_SWIOTLB
+	struct dev_archdata *sd = &dev->archdata;
 
-	if (ops->addr_needs_map && ops->addr_needs_map(dev, addr, size))
+	if (sd->max_direct_dma_addr && addr + size > sd->max_direct_dma_addr)
 		return 0;
+#endif
 
 	if (!dev->dma_mask)
 		return 0;
diff --git a/arch/powerpc/include/asm/swiotlb.h b/arch/powerpc/include/asm/swiotlb.h
index 30891d6e2bc..31e0e43c880 100644
--- a/arch/powerpc/include/asm/swiotlb.h
+++ b/arch/powerpc/include/asm/swiotlb.h
@@ -16,12 +16,11 @@
 extern struct dma_mapping_ops swiotlb_dma_ops;
 extern struct dma_mapping_ops swiotlb_pci_dma_ops;
 
-int swiotlb_arch_address_needs_mapping(struct device *, dma_addr_t,
-				       size_t size);
-
 static inline void dma_mark_clean(void *addr, size_t size) {}
 
 extern unsigned int ppc_swiotlb_enable;
 int __init swiotlb_setup_bus_notifier(void);
 
+extern void pci_dma_dev_setup_swiotlb(struct pci_dev *pdev);
+
 #endif /* __ASM_SWIOTLB_H */
diff --git a/arch/powerpc/kernel/dma-swiotlb.c b/arch/powerpc/kernel/dma-swiotlb.c
index e8a57de85bc..c9f6a302e87 100644
--- a/arch/powerpc/kernel/dma-swiotlb.c
+++ b/arch/powerpc/kernel/dma-swiotlb.c
@@ -24,26 +24,6 @@
 int swiotlb __read_mostly;
 unsigned int ppc_swiotlb_enable;
 
-/*
- * Determine if an address is reachable by a pci device, or if we must bounce.
- */
-static int
-swiotlb_pci_addr_needs_map(struct device *hwdev, dma_addr_t addr, size_t size)
-{
-	dma_addr_t max;
-	struct pci_controller *hose;
-	struct pci_dev *pdev = to_pci_dev(hwdev);
-
-	hose = pci_bus_to_host(pdev->bus);
-	max = hose->dma_window_base_cur + hose->dma_window_size;
-
-	/* check that we're within mapped pci window space */
-	if ((addr + size > max) | (addr < hose->dma_window_base_cur))
-		return 1;
-
-	return 0;
-}
-
 /*
  * At the moment, all platforms that use this code only require
  * swiotlb to be used if we're operating on HIGHMEM.  Since
@@ -73,22 +53,36 @@ struct dma_mapping_ops swiotlb_pci_dma_ops = {
 	.dma_supported = swiotlb_dma_supported,
 	.map_page = swiotlb_map_page,
 	.unmap_page = swiotlb_unmap_page,
-	.addr_needs_map = swiotlb_pci_addr_needs_map,
 	.sync_single_range_for_cpu = swiotlb_sync_single_range_for_cpu,
 	.sync_single_range_for_device = swiotlb_sync_single_range_for_device,
 	.sync_sg_for_cpu = swiotlb_sync_sg_for_cpu,
 	.sync_sg_for_device = swiotlb_sync_sg_for_device
 };
 
+void pci_dma_dev_setup_swiotlb(struct pci_dev *pdev)
+{
+	struct pci_controller *hose;
+	struct dev_archdata *sd;
+
+	hose = pci_bus_to_host(pdev->bus);
+	sd = &pdev->dev.archdata;
+	sd->max_direct_dma_addr =
+		hose->dma_window_base_cur + hose->dma_window_size;
+}
+
 static int ppc_swiotlb_bus_notify(struct notifier_block *nb,
 				  unsigned long action, void *data)
 {
 	struct device *dev = data;
+	struct dev_archdata *sd;
 
 	/* We are only intereted in device addition */
 	if (action != BUS_NOTIFY_ADD_DEVICE)
 		return 0;
 
+	sd = &dev->archdata;
+	sd->max_direct_dma_addr = 0;
+
 	/* May need to bounce if the device can't address all of DRAM */
 	if (dma_get_mask(dev) < lmb_end_of_DRAM())
 		set_dma_ops(dev, &swiotlb_dma_ops);
diff --git a/arch/powerpc/platforms/85xx/mpc8536_ds.c b/arch/powerpc/platforms/85xx/mpc8536_ds.c
index 055ff417bae..bf052c05610 100644
--- a/arch/powerpc/platforms/85xx/mpc8536_ds.c
+++ b/arch/powerpc/platforms/85xx/mpc8536_ds.c
@@ -97,6 +97,7 @@ static void __init mpc8536_ds_setup_arch(void)
 	if (lmb_end_of_DRAM() > max) {
 		ppc_swiotlb_enable = 1;
 		set_pci_dma_ops(&swiotlb_pci_dma_ops);
+		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
 	}
 #endif
 
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ds.c b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
index 849c0ac0025..c6f92ccd963 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
@@ -193,6 +193,7 @@ static void __init mpc85xx_ds_setup_arch(void)
 	if (lmb_end_of_DRAM() > max) {
 		ppc_swiotlb_enable = 1;
 		set_pci_dma_ops(&swiotlb_pci_dma_ops);
+		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
 	}
 #endif
 
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
index 20a61d0af33..25998b661f2 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -256,6 +256,7 @@ static void __init mpc85xx_mds_setup_arch(void)
 	if (lmb_end_of_DRAM() > max) {
 		ppc_swiotlb_enable = 1;
 		set_pci_dma_ops(&swiotlb_pci_dma_ops);
+		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
 	}
 #endif
 }
diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
index 66327024a6a..80323015687 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
+++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
@@ -106,6 +106,7 @@ mpc86xx_hpcn_setup_arch(void)
 	if (lmb_end_of_DRAM() > max) {
 		ppc_swiotlb_enable = 1;
 		set_pci_dma_ops(&swiotlb_pci_dma_ops);
+		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
 	}
 #endif
 }
-- 
cgit v1.2.3


From 3702977fa7d1a1a95caa387121fa7c9f4cae35f3 Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Tue, 4 Aug 2009 19:08:23 +0000
Subject: powerpc: Remove swiotlb_pci_dma_ops

Now swiotlb_pci_dma_ops is identical to swiotlb_dma_ops; we can use
swiotlb_dma_ops with any devices. This removes swiotlb_pci_dma_ops.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Becky Bruce <beckyb@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/swiotlb.h         |  1 -
 arch/powerpc/kernel/dma-swiotlb.c          | 14 --------------
 arch/powerpc/platforms/85xx/mpc8536_ds.c   |  2 +-
 arch/powerpc/platforms/85xx/mpc85xx_ds.c   |  2 +-
 arch/powerpc/platforms/85xx/mpc85xx_mds.c  |  2 +-
 arch/powerpc/platforms/86xx/mpc86xx_hpcn.c |  2 +-
 6 files changed, 4 insertions(+), 19 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/swiotlb.h b/arch/powerpc/include/asm/swiotlb.h
index 31e0e43c880..21ce0a3b494 100644
--- a/arch/powerpc/include/asm/swiotlb.h
+++ b/arch/powerpc/include/asm/swiotlb.h
@@ -14,7 +14,6 @@
 #include <linux/swiotlb.h>
 
 extern struct dma_mapping_ops swiotlb_dma_ops;
-extern struct dma_mapping_ops swiotlb_pci_dma_ops;
 
 static inline void dma_mark_clean(void *addr, size_t size) {}
 
diff --git a/arch/powerpc/kernel/dma-swiotlb.c b/arch/powerpc/kernel/dma-swiotlb.c
index c9f6a302e87..ca141e108ae 100644
--- a/arch/powerpc/kernel/dma-swiotlb.c
+++ b/arch/powerpc/kernel/dma-swiotlb.c
@@ -45,20 +45,6 @@ struct dma_mapping_ops swiotlb_dma_ops = {
 	.sync_sg_for_device = swiotlb_sync_sg_for_device
 };
 
-struct dma_mapping_ops swiotlb_pci_dma_ops = {
-	.alloc_coherent = dma_direct_alloc_coherent,
-	.free_coherent = dma_direct_free_coherent,
-	.map_sg = swiotlb_map_sg_attrs,
-	.unmap_sg = swiotlb_unmap_sg_attrs,
-	.dma_supported = swiotlb_dma_supported,
-	.map_page = swiotlb_map_page,
-	.unmap_page = swiotlb_unmap_page,
-	.sync_single_range_for_cpu = swiotlb_sync_single_range_for_cpu,
-	.sync_single_range_for_device = swiotlb_sync_single_range_for_device,
-	.sync_sg_for_cpu = swiotlb_sync_sg_for_cpu,
-	.sync_sg_for_device = swiotlb_sync_sg_for_device
-};
-
 void pci_dma_dev_setup_swiotlb(struct pci_dev *pdev)
 {
 	struct pci_controller *hose;
diff --git a/arch/powerpc/platforms/85xx/mpc8536_ds.c b/arch/powerpc/platforms/85xx/mpc8536_ds.c
index bf052c05610..004b7d36cdb 100644
--- a/arch/powerpc/platforms/85xx/mpc8536_ds.c
+++ b/arch/powerpc/platforms/85xx/mpc8536_ds.c
@@ -96,7 +96,7 @@ static void __init mpc8536_ds_setup_arch(void)
 #ifdef CONFIG_SWIOTLB
 	if (lmb_end_of_DRAM() > max) {
 		ppc_swiotlb_enable = 1;
-		set_pci_dma_ops(&swiotlb_pci_dma_ops);
+		set_pci_dma_ops(&swiotlb_dma_ops);
 		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
 	}
 #endif
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ds.c b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
index c6f92ccd963..544011a562f 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
@@ -192,7 +192,7 @@ static void __init mpc85xx_ds_setup_arch(void)
 #ifdef CONFIG_SWIOTLB
 	if (lmb_end_of_DRAM() > max) {
 		ppc_swiotlb_enable = 1;
-		set_pci_dma_ops(&swiotlb_pci_dma_ops);
+		set_pci_dma_ops(&swiotlb_dma_ops);
 		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
 	}
 #endif
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
index 25998b661f2..3909d57b86e 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -255,7 +255,7 @@ static void __init mpc85xx_mds_setup_arch(void)
 #ifdef CONFIG_SWIOTLB
 	if (lmb_end_of_DRAM() > max) {
 		ppc_swiotlb_enable = 1;
-		set_pci_dma_ops(&swiotlb_pci_dma_ops);
+		set_pci_dma_ops(&swiotlb_dma_ops);
 		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
 	}
 #endif
diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
index 80323015687..2aa69a69bcc 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
+++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
@@ -105,7 +105,7 @@ mpc86xx_hpcn_setup_arch(void)
 #ifdef CONFIG_SWIOTLB
 	if (lmb_end_of_DRAM() > max) {
 		ppc_swiotlb_enable = 1;
-		set_pci_dma_ops(&swiotlb_pci_dma_ops);
+		set_pci_dma_ops(&swiotlb_dma_ops);
 		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
 	}
 #endif
-- 
cgit v1.2.3


From 45223c549273bbb2c6e1bc6e3629174e8765ad01 Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Tue, 4 Aug 2009 19:08:25 +0000
Subject: powerpc: use dma_map_ops struct

This converts uses dma_map_ops struct (in include/linux/dma-mapping.h)
instead of POWERPC homegrown dma_mapping_ops.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Becky Bruce <beckyb@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/device.h       |  4 +-
 arch/powerpc/include/asm/dma-mapping.h  | 84 +++++++++------------------------
 arch/powerpc/include/asm/pci.h          |  4 +-
 arch/powerpc/include/asm/swiotlb.h      |  2 +-
 arch/powerpc/kernel/dma-iommu.c         |  2 +-
 arch/powerpc/kernel/dma-swiotlb.c       |  2 +-
 arch/powerpc/kernel/dma.c               |  2 +-
 arch/powerpc/kernel/ibmebus.c           |  2 +-
 arch/powerpc/kernel/pci-common.c        |  6 +--
 arch/powerpc/kernel/vio.c               |  2 +-
 arch/powerpc/platforms/cell/iommu.c     |  2 +-
 arch/powerpc/platforms/ps3/system-bus.c |  4 +-
 12 files changed, 37 insertions(+), 79 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/device.h b/arch/powerpc/include/asm/device.h
index 0086f8d46f1..67fcd7f89d9 100644
--- a/arch/powerpc/include/asm/device.h
+++ b/arch/powerpc/include/asm/device.h
@@ -6,7 +6,7 @@
 #ifndef _ASM_POWERPC_DEVICE_H
 #define _ASM_POWERPC_DEVICE_H
 
-struct dma_mapping_ops;
+struct dma_map_ops;
 struct device_node;
 
 struct dev_archdata {
@@ -14,7 +14,7 @@ struct dev_archdata {
 	struct device_node	*of_node;
 
 	/* DMA operations on that device */
-	struct dma_mapping_ops	*dma_ops;
+	struct dma_map_ops	*dma_ops;
 	void			*dma_data;
 #ifdef CONFIG_SWIOTLB
 	dma_addr_t		max_direct_dma_addr;
diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h
index 1765c379138..8ca2b5183c5 100644
--- a/arch/powerpc/include/asm/dma-mapping.h
+++ b/arch/powerpc/include/asm/dma-mapping.h
@@ -63,57 +63,15 @@ static inline unsigned long device_to_mask(struct device *dev)
 	return 0xfffffffful;
 }
 
-/*
- * DMA operations are abstracted for G5 vs. i/pSeries, PCI vs. VIO
- */
-struct dma_mapping_ops {
-	void *		(*alloc_coherent)(struct device *dev, size_t size,
-				dma_addr_t *dma_handle, gfp_t flag);
-	void		(*free_coherent)(struct device *dev, size_t size,
-				void *vaddr, dma_addr_t dma_handle);
-	int		(*map_sg)(struct device *dev, struct scatterlist *sg,
-				int nents, enum dma_data_direction direction,
-				struct dma_attrs *attrs);
-	void		(*unmap_sg)(struct device *dev, struct scatterlist *sg,
-				int nents, enum dma_data_direction direction,
-				struct dma_attrs *attrs);
-	int		(*dma_supported)(struct device *dev, u64 mask);
-	int		(*set_dma_mask)(struct device *dev, u64 dma_mask);
-	dma_addr_t 	(*map_page)(struct device *dev, struct page *page,
-				unsigned long offset, size_t size,
-				enum dma_data_direction direction,
-				struct dma_attrs *attrs);
-	void		(*unmap_page)(struct device *dev,
-				dma_addr_t dma_address, size_t size,
-				enum dma_data_direction direction,
-				struct dma_attrs *attrs);
-#ifdef CONFIG_PPC_NEED_DMA_SYNC_OPS
-	void            (*sync_single_range_for_cpu)(struct device *hwdev,
-				dma_addr_t dma_handle, unsigned long offset,
-				size_t size,
-				enum dma_data_direction direction);
-	void            (*sync_single_range_for_device)(struct device *hwdev,
-				dma_addr_t dma_handle, unsigned long offset,
-				size_t size,
-				enum dma_data_direction direction);
-	void            (*sync_sg_for_cpu)(struct device *hwdev,
-				struct scatterlist *sg, int nelems,
-				enum dma_data_direction direction);
-	void            (*sync_sg_for_device)(struct device *hwdev,
-				struct scatterlist *sg, int nelems,
-				enum dma_data_direction direction);
-#endif
-};
-
 /*
  * Available generic sets of operations
  */
 #ifdef CONFIG_PPC64
-extern struct dma_mapping_ops dma_iommu_ops;
+extern struct dma_map_ops dma_iommu_ops;
 #endif
-extern struct dma_mapping_ops dma_direct_ops;
+extern struct dma_map_ops dma_direct_ops;
 
-static inline struct dma_mapping_ops *get_dma_ops(struct device *dev)
+static inline struct dma_map_ops *get_dma_ops(struct device *dev)
 {
 	/* We don't handle the NULL dev case for ISA for now. We could
 	 * do it via an out of line call but it is not needed for now. The
@@ -126,14 +84,14 @@ static inline struct dma_mapping_ops *get_dma_ops(struct device *dev)
 	return dev->archdata.dma_ops;
 }
 
-static inline void set_dma_ops(struct device *dev, struct dma_mapping_ops *ops)
+static inline void set_dma_ops(struct device *dev, struct dma_map_ops *ops)
 {
 	dev->archdata.dma_ops = ops;
 }
 
 static inline int dma_supported(struct device *dev, u64 mask)
 {
-	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+	struct dma_map_ops *dma_ops = get_dma_ops(dev);
 
 	if (unlikely(dma_ops == NULL))
 		return 0;
@@ -147,7 +105,7 @@ static inline int dma_supported(struct device *dev, u64 mask)
 
 static inline int dma_set_mask(struct device *dev, u64 dma_mask)
 {
-	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+	struct dma_map_ops *dma_ops = get_dma_ops(dev);
 
 	if (unlikely(dma_ops == NULL))
 		return -EIO;
@@ -161,7 +119,7 @@ static inline int dma_set_mask(struct device *dev, u64 dma_mask)
 
 /*
  * map_/unmap_single actually call through to map/unmap_page now that all the
- * dma_mapping_ops have been converted over. We just have to get the page and
+ * dma_map_ops have been converted over. We just have to get the page and
  * offset to pass through to map_page
  */
 static inline dma_addr_t dma_map_single_attrs(struct device *dev,
@@ -170,7 +128,7 @@ static inline dma_addr_t dma_map_single_attrs(struct device *dev,
 					      enum dma_data_direction direction,
 					      struct dma_attrs *attrs)
 {
-	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+	struct dma_map_ops *dma_ops = get_dma_ops(dev);
 
 	BUG_ON(!dma_ops);
 
@@ -185,7 +143,7 @@ static inline void dma_unmap_single_attrs(struct device *dev,
 					  enum dma_data_direction direction,
 					  struct dma_attrs *attrs)
 {
-	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+	struct dma_map_ops *dma_ops = get_dma_ops(dev);
 
 	BUG_ON(!dma_ops);
 
@@ -198,7 +156,7 @@ static inline dma_addr_t dma_map_page_attrs(struct device *dev,
 					    enum dma_data_direction direction,
 					    struct dma_attrs *attrs)
 {
-	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+	struct dma_map_ops *dma_ops = get_dma_ops(dev);
 
 	BUG_ON(!dma_ops);
 
@@ -211,7 +169,7 @@ static inline void dma_unmap_page_attrs(struct device *dev,
 					enum dma_data_direction direction,
 					struct dma_attrs *attrs)
 {
-	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+	struct dma_map_ops *dma_ops = get_dma_ops(dev);
 
 	BUG_ON(!dma_ops);
 
@@ -222,7 +180,7 @@ static inline int dma_map_sg_attrs(struct device *dev, struct scatterlist *sg,
 				   int nents, enum dma_data_direction direction,
 				   struct dma_attrs *attrs)
 {
-	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+	struct dma_map_ops *dma_ops = get_dma_ops(dev);
 
 	BUG_ON(!dma_ops);
 	return dma_ops->map_sg(dev, sg, nents, direction, attrs);
@@ -234,7 +192,7 @@ static inline void dma_unmap_sg_attrs(struct device *dev,
 				      enum dma_data_direction direction,
 				      struct dma_attrs *attrs)
 {
-	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+	struct dma_map_ops *dma_ops = get_dma_ops(dev);
 
 	BUG_ON(!dma_ops);
 	dma_ops->unmap_sg(dev, sg, nhwentries, direction, attrs);
@@ -243,7 +201,7 @@ static inline void dma_unmap_sg_attrs(struct device *dev,
 static inline void *dma_alloc_coherent(struct device *dev, size_t size,
 				       dma_addr_t *dma_handle, gfp_t flag)
 {
-	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+	struct dma_map_ops *dma_ops = get_dma_ops(dev);
 
 	BUG_ON(!dma_ops);
 	return dma_ops->alloc_coherent(dev, size, dma_handle, flag);
@@ -252,7 +210,7 @@ static inline void *dma_alloc_coherent(struct device *dev, size_t size,
 static inline void dma_free_coherent(struct device *dev, size_t size,
 				     void *cpu_addr, dma_addr_t dma_handle)
 {
-	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+	struct dma_map_ops *dma_ops = get_dma_ops(dev);
 
 	BUG_ON(!dma_ops);
 	dma_ops->free_coherent(dev, size, cpu_addr, dma_handle);
@@ -304,7 +262,7 @@ static inline void dma_sync_single_for_cpu(struct device *dev,
 		dma_addr_t dma_handle, size_t size,
 		enum dma_data_direction direction)
 {
-	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+	struct dma_map_ops *dma_ops = get_dma_ops(dev);
 
 	BUG_ON(!dma_ops);
 
@@ -317,7 +275,7 @@ static inline void dma_sync_single_for_device(struct device *dev,
 		dma_addr_t dma_handle, size_t size,
 		enum dma_data_direction direction)
 {
-	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+	struct dma_map_ops *dma_ops = get_dma_ops(dev);
 
 	BUG_ON(!dma_ops);
 
@@ -330,7 +288,7 @@ static inline void dma_sync_sg_for_cpu(struct device *dev,
 		struct scatterlist *sgl, int nents,
 		enum dma_data_direction direction)
 {
-	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+	struct dma_map_ops *dma_ops = get_dma_ops(dev);
 
 	BUG_ON(!dma_ops);
 
@@ -342,7 +300,7 @@ static inline void dma_sync_sg_for_device(struct device *dev,
 		struct scatterlist *sgl, int nents,
 		enum dma_data_direction direction)
 {
-	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+	struct dma_map_ops *dma_ops = get_dma_ops(dev);
 
 	BUG_ON(!dma_ops);
 
@@ -354,7 +312,7 @@ static inline void dma_sync_single_range_for_cpu(struct device *dev,
 		dma_addr_t dma_handle, unsigned long offset, size_t size,
 		enum dma_data_direction direction)
 {
-	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+	struct dma_map_ops *dma_ops = get_dma_ops(dev);
 
 	BUG_ON(!dma_ops);
 
@@ -367,7 +325,7 @@ static inline void dma_sync_single_range_for_device(struct device *dev,
 		dma_addr_t dma_handle, unsigned long offset, size_t size,
 		enum dma_data_direction direction)
 {
-	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+	struct dma_map_ops *dma_ops = get_dma_ops(dev);
 
 	BUG_ON(!dma_ops);
 
diff --git a/arch/powerpc/include/asm/pci.h b/arch/powerpc/include/asm/pci.h
index d9483c504d2..7ae46d7e270 100644
--- a/arch/powerpc/include/asm/pci.h
+++ b/arch/powerpc/include/asm/pci.h
@@ -61,8 +61,8 @@ static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
 }
 
 #ifdef CONFIG_PCI
-extern void set_pci_dma_ops(struct dma_mapping_ops *dma_ops);
-extern struct dma_mapping_ops *get_pci_dma_ops(void);
+extern void set_pci_dma_ops(struct dma_map_ops *dma_ops);
+extern struct dma_map_ops *get_pci_dma_ops(void);
 #else	/* CONFIG_PCI */
 #define set_pci_dma_ops(d)
 #define get_pci_dma_ops()	NULL
diff --git a/arch/powerpc/include/asm/swiotlb.h b/arch/powerpc/include/asm/swiotlb.h
index 21ce0a3b494..8979d4cd3d7 100644
--- a/arch/powerpc/include/asm/swiotlb.h
+++ b/arch/powerpc/include/asm/swiotlb.h
@@ -13,7 +13,7 @@
 
 #include <linux/swiotlb.h>
 
-extern struct dma_mapping_ops swiotlb_dma_ops;
+extern struct dma_map_ops swiotlb_dma_ops;
 
 static inline void dma_mark_clean(void *addr, size_t size) {}
 
diff --git a/arch/powerpc/kernel/dma-iommu.c b/arch/powerpc/kernel/dma-iommu.c
index 2983adac8cc..87ddb3fb948 100644
--- a/arch/powerpc/kernel/dma-iommu.c
+++ b/arch/powerpc/kernel/dma-iommu.c
@@ -89,7 +89,7 @@ static int dma_iommu_dma_supported(struct device *dev, u64 mask)
 		return 1;
 }
 
-struct dma_mapping_ops dma_iommu_ops = {
+struct dma_map_ops dma_iommu_ops = {
 	.alloc_coherent	= dma_iommu_alloc_coherent,
 	.free_coherent	= dma_iommu_free_coherent,
 	.map_sg		= dma_iommu_map_sg,
diff --git a/arch/powerpc/kernel/dma-swiotlb.c b/arch/powerpc/kernel/dma-swiotlb.c
index ca141e108ae..d1143a68d82 100644
--- a/arch/powerpc/kernel/dma-swiotlb.c
+++ b/arch/powerpc/kernel/dma-swiotlb.c
@@ -31,7 +31,7 @@ unsigned int ppc_swiotlb_enable;
  * map_page, and unmap_page on highmem, use normal dma_ops
  * for everything else.
  */
-struct dma_mapping_ops swiotlb_dma_ops = {
+struct dma_map_ops swiotlb_dma_ops = {
 	.alloc_coherent = dma_direct_alloc_coherent,
 	.free_coherent = dma_direct_free_coherent,
 	.map_sg = swiotlb_map_sg_attrs,
diff --git a/arch/powerpc/kernel/dma.c b/arch/powerpc/kernel/dma.c
index ccf129d47d8..c61f70e145a 100644
--- a/arch/powerpc/kernel/dma.c
+++ b/arch/powerpc/kernel/dma.c
@@ -140,7 +140,7 @@ static inline void dma_direct_sync_single_range(struct device *dev,
 }
 #endif
 
-struct dma_mapping_ops dma_direct_ops = {
+struct dma_map_ops dma_direct_ops = {
 	.alloc_coherent	= dma_direct_alloc_coherent,
 	.free_coherent	= dma_direct_free_coherent,
 	.map_sg		= dma_direct_map_sg,
diff --git a/arch/powerpc/kernel/ibmebus.c b/arch/powerpc/kernel/ibmebus.c
index 6e3f6249365..a4c8b38b0ba 100644
--- a/arch/powerpc/kernel/ibmebus.c
+++ b/arch/powerpc/kernel/ibmebus.c
@@ -127,7 +127,7 @@ static int ibmebus_dma_supported(struct device *dev, u64 mask)
 	return 1;
 }
 
-static struct dma_mapping_ops ibmebus_dma_ops = {
+static struct dma_map_ops ibmebus_dma_ops = {
 	.alloc_coherent = ibmebus_alloc_coherent,
 	.free_coherent  = ibmebus_free_coherent,
 	.map_sg         = ibmebus_map_sg,
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index 5a56e97c5ac..7585f1fc26d 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -50,14 +50,14 @@ resource_size_t isa_mem_base;
 unsigned int ppc_pci_flags = 0;
 
 
-static struct dma_mapping_ops *pci_dma_ops = &dma_direct_ops;
+static struct dma_map_ops *pci_dma_ops = &dma_direct_ops;
 
-void set_pci_dma_ops(struct dma_mapping_ops *dma_ops)
+void set_pci_dma_ops(struct dma_map_ops *dma_ops)
 {
 	pci_dma_ops = dma_ops;
 }
 
-struct dma_mapping_ops *get_pci_dma_ops(void)
+struct dma_map_ops *get_pci_dma_ops(void)
 {
 	return pci_dma_ops;
 }
diff --git a/arch/powerpc/kernel/vio.c b/arch/powerpc/kernel/vio.c
index 819e59f6f7c..bc7b41edbdf 100644
--- a/arch/powerpc/kernel/vio.c
+++ b/arch/powerpc/kernel/vio.c
@@ -601,7 +601,7 @@ static void vio_dma_iommu_unmap_sg(struct device *dev,
 	vio_cmo_dealloc(viodev, alloc_size);
 }
 
-struct dma_mapping_ops vio_dma_mapping_ops = {
+struct dma_map_ops vio_dma_mapping_ops = {
 	.alloc_coherent = vio_dma_iommu_alloc_coherent,
 	.free_coherent  = vio_dma_iommu_free_coherent,
 	.map_sg         = vio_dma_iommu_map_sg,
diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c
index 5b34fc211f3..416db17eb18 100644
--- a/arch/powerpc/platforms/cell/iommu.c
+++ b/arch/powerpc/platforms/cell/iommu.c
@@ -642,7 +642,7 @@ static int dma_fixed_dma_supported(struct device *dev, u64 mask)
 
 static int dma_set_mask_and_switch(struct device *dev, u64 dma_mask);
 
-struct dma_mapping_ops dma_iommu_fixed_ops = {
+struct dma_map_ops dma_iommu_fixed_ops = {
 	.alloc_coherent = dma_fixed_alloc_coherent,
 	.free_coherent  = dma_fixed_free_coherent,
 	.map_sg         = dma_fixed_map_sg,
diff --git a/arch/powerpc/platforms/ps3/system-bus.c b/arch/powerpc/platforms/ps3/system-bus.c
index 676f989ed4e..e34b305a7a5 100644
--- a/arch/powerpc/platforms/ps3/system-bus.c
+++ b/arch/powerpc/platforms/ps3/system-bus.c
@@ -694,7 +694,7 @@ static int ps3_dma_supported(struct device *_dev, u64 mask)
 	return mask >= DMA_BIT_MASK(32);
 }
 
-static struct dma_mapping_ops ps3_sb_dma_ops = {
+static struct dma_map_ops ps3_sb_dma_ops = {
 	.alloc_coherent = ps3_alloc_coherent,
 	.free_coherent = ps3_free_coherent,
 	.map_sg = ps3_sb_map_sg,
@@ -704,7 +704,7 @@ static struct dma_mapping_ops ps3_sb_dma_ops = {
 	.unmap_page = ps3_unmap_page,
 };
 
-static struct dma_mapping_ops ps3_ioc0_dma_ops = {
+static struct dma_map_ops ps3_ioc0_dma_ops = {
 	.alloc_coherent = ps3_alloc_coherent,
 	.free_coherent = ps3_free_coherent,
 	.map_sg = ps3_ioc0_map_sg,
-- 
cgit v1.2.3


From 46bab4e4b45ec522ecd5fa4a0e2b4a6e6d1f153a Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Tue, 4 Aug 2009 19:08:26 +0000
Subject: powerpc: Use asm-generic/dma-mapping-common.h

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Becky Bruce <beckyb@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/Kconfig                   |   6 +-
 arch/powerpc/include/asm/dma-mapping.h | 242 +--------------------------------
 2 files changed, 7 insertions(+), 241 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 4c0747e8ed7..6078253c6d7 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -120,7 +120,7 @@ config PPC
 	select HAVE_KRETPROBES
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_LMB
-	select HAVE_DMA_ATTRS if PPC64
+	select HAVE_DMA_ATTRS
 	select USE_GENERIC_SMP_HELPERS if SMP
 	select HAVE_OPROFILE
 	select HAVE_SYSCALL_WRAPPERS if PPC64
@@ -307,10 +307,6 @@ config SWIOTLB
 	  platforms where the size of a physical address is larger
 	  than the bus address.  Not all platforms support this.
 
-config PPC_NEED_DMA_SYNC_OPS
-	def_bool y
-	depends on (NOT_COHERENT_CACHE || SWIOTLB)
-
 config HOTPLUG_CPU
 	bool "Support for enabling/disabling CPUs"
 	depends on SMP && HOTPLUG && EXPERIMENTAL && (PPC_PSERIES || PPC_PMAC)
diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h
index 8ca2b5183c5..91217e4a0bf 100644
--- a/arch/powerpc/include/asm/dma-mapping.h
+++ b/arch/powerpc/include/asm/dma-mapping.h
@@ -14,6 +14,7 @@
 #include <linux/mm.h>
 #include <linux/scatterlist.h>
 #include <linux/dma-attrs.h>
+#include <linux/dma-debug.h>
 #include <asm/io.h>
 #include <asm/swiotlb.h>
 
@@ -89,6 +90,11 @@ static inline void set_dma_ops(struct device *dev, struct dma_map_ops *ops)
 	dev->archdata.dma_ops = ops;
 }
 
+/* this will be removed soon */
+#define flush_write_buffers()
+
+#include <asm-generic/dma-mapping-common.h>
+
 static inline int dma_supported(struct device *dev, u64 mask)
 {
 	struct dma_map_ops *dma_ops = get_dma_ops(dev);
@@ -117,87 +123,6 @@ static inline int dma_set_mask(struct device *dev, u64 dma_mask)
 	return 0;
 }
 
-/*
- * map_/unmap_single actually call through to map/unmap_page now that all the
- * dma_map_ops have been converted over. We just have to get the page and
- * offset to pass through to map_page
- */
-static inline dma_addr_t dma_map_single_attrs(struct device *dev,
-					      void *cpu_addr,
-					      size_t size,
-					      enum dma_data_direction direction,
-					      struct dma_attrs *attrs)
-{
-	struct dma_map_ops *dma_ops = get_dma_ops(dev);
-
-	BUG_ON(!dma_ops);
-
-	return dma_ops->map_page(dev, virt_to_page(cpu_addr),
-				 (unsigned long)cpu_addr % PAGE_SIZE, size,
-				 direction, attrs);
-}
-
-static inline void dma_unmap_single_attrs(struct device *dev,
-					  dma_addr_t dma_addr,
-					  size_t size,
-					  enum dma_data_direction direction,
-					  struct dma_attrs *attrs)
-{
-	struct dma_map_ops *dma_ops = get_dma_ops(dev);
-
-	BUG_ON(!dma_ops);
-
-	dma_ops->unmap_page(dev, dma_addr, size, direction, attrs);
-}
-
-static inline dma_addr_t dma_map_page_attrs(struct device *dev,
-					    struct page *page,
-					    unsigned long offset, size_t size,
-					    enum dma_data_direction direction,
-					    struct dma_attrs *attrs)
-{
-	struct dma_map_ops *dma_ops = get_dma_ops(dev);
-
-	BUG_ON(!dma_ops);
-
-	return dma_ops->map_page(dev, page, offset, size, direction, attrs);
-}
-
-static inline void dma_unmap_page_attrs(struct device *dev,
-					dma_addr_t dma_address,
-					size_t size,
-					enum dma_data_direction direction,
-					struct dma_attrs *attrs)
-{
-	struct dma_map_ops *dma_ops = get_dma_ops(dev);
-
-	BUG_ON(!dma_ops);
-
-	dma_ops->unmap_page(dev, dma_address, size, direction, attrs);
-}
-
-static inline int dma_map_sg_attrs(struct device *dev, struct scatterlist *sg,
-				   int nents, enum dma_data_direction direction,
-				   struct dma_attrs *attrs)
-{
-	struct dma_map_ops *dma_ops = get_dma_ops(dev);
-
-	BUG_ON(!dma_ops);
-	return dma_ops->map_sg(dev, sg, nents, direction, attrs);
-}
-
-static inline void dma_unmap_sg_attrs(struct device *dev,
-				      struct scatterlist *sg,
-				      int nhwentries,
-				      enum dma_data_direction direction,
-				      struct dma_attrs *attrs)
-{
-	struct dma_map_ops *dma_ops = get_dma_ops(dev);
-
-	BUG_ON(!dma_ops);
-	dma_ops->unmap_sg(dev, sg, nhwentries, direction, attrs);
-}
-
 static inline void *dma_alloc_coherent(struct device *dev, size_t size,
 				       dma_addr_t *dma_handle, gfp_t flag)
 {
@@ -216,161 +141,6 @@ static inline void dma_free_coherent(struct device *dev, size_t size,
 	dma_ops->free_coherent(dev, size, cpu_addr, dma_handle);
 }
 
-static inline dma_addr_t dma_map_single(struct device *dev, void *cpu_addr,
-					size_t size,
-					enum dma_data_direction direction)
-{
-	return dma_map_single_attrs(dev, cpu_addr, size, direction, NULL);
-}
-
-static inline void dma_unmap_single(struct device *dev, dma_addr_t dma_addr,
-				    size_t size,
-				    enum dma_data_direction direction)
-{
-	dma_unmap_single_attrs(dev, dma_addr, size, direction, NULL);
-}
-
-static inline dma_addr_t dma_map_page(struct device *dev, struct page *page,
-				      unsigned long offset, size_t size,
-				      enum dma_data_direction direction)
-{
-	return dma_map_page_attrs(dev, page, offset, size, direction, NULL);
-}
-
-static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
-				  size_t size,
-				  enum dma_data_direction direction)
-{
-	dma_unmap_page_attrs(dev, dma_address, size, direction, NULL);
-}
-
-static inline int dma_map_sg(struct device *dev, struct scatterlist *sg,
-			     int nents, enum dma_data_direction direction)
-{
-	return dma_map_sg_attrs(dev, sg, nents, direction, NULL);
-}
-
-static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
-				int nhwentries,
-				enum dma_data_direction direction)
-{
-	dma_unmap_sg_attrs(dev, sg, nhwentries, direction, NULL);
-}
-
-#ifdef CONFIG_PPC_NEED_DMA_SYNC_OPS
-static inline void dma_sync_single_for_cpu(struct device *dev,
-		dma_addr_t dma_handle, size_t size,
-		enum dma_data_direction direction)
-{
-	struct dma_map_ops *dma_ops = get_dma_ops(dev);
-
-	BUG_ON(!dma_ops);
-
-	if (dma_ops->sync_single_range_for_cpu)
-		dma_ops->sync_single_range_for_cpu(dev, dma_handle, 0,
-					   size, direction);
-}
-
-static inline void dma_sync_single_for_device(struct device *dev,
-		dma_addr_t dma_handle, size_t size,
-		enum dma_data_direction direction)
-{
-	struct dma_map_ops *dma_ops = get_dma_ops(dev);
-
-	BUG_ON(!dma_ops);
-
-	if (dma_ops->sync_single_range_for_device)
-		dma_ops->sync_single_range_for_device(dev, dma_handle,
-					      0, size, direction);
-}
-
-static inline void dma_sync_sg_for_cpu(struct device *dev,
-		struct scatterlist *sgl, int nents,
-		enum dma_data_direction direction)
-{
-	struct dma_map_ops *dma_ops = get_dma_ops(dev);
-
-	BUG_ON(!dma_ops);
-
-	if (dma_ops->sync_sg_for_cpu)
-		dma_ops->sync_sg_for_cpu(dev, sgl, nents, direction);
-}
-
-static inline void dma_sync_sg_for_device(struct device *dev,
-		struct scatterlist *sgl, int nents,
-		enum dma_data_direction direction)
-{
-	struct dma_map_ops *dma_ops = get_dma_ops(dev);
-
-	BUG_ON(!dma_ops);
-
-	if (dma_ops->sync_sg_for_device)
-		dma_ops->sync_sg_for_device(dev, sgl, nents, direction);
-}
-
-static inline void dma_sync_single_range_for_cpu(struct device *dev,
-		dma_addr_t dma_handle, unsigned long offset, size_t size,
-		enum dma_data_direction direction)
-{
-	struct dma_map_ops *dma_ops = get_dma_ops(dev);
-
-	BUG_ON(!dma_ops);
-
-	if (dma_ops->sync_single_range_for_cpu)
-		dma_ops->sync_single_range_for_cpu(dev, dma_handle,
-					   offset, size, direction);
-}
-
-static inline void dma_sync_single_range_for_device(struct device *dev,
-		dma_addr_t dma_handle, unsigned long offset, size_t size,
-		enum dma_data_direction direction)
-{
-	struct dma_map_ops *dma_ops = get_dma_ops(dev);
-
-	BUG_ON(!dma_ops);
-
-	if (dma_ops->sync_single_range_for_device)
-		dma_ops->sync_single_range_for_device(dev, dma_handle, offset,
-					      size, direction);
-}
-#else /* CONFIG_PPC_NEED_DMA_SYNC_OPS */
-static inline void dma_sync_single_for_cpu(struct device *dev,
-		dma_addr_t dma_handle, size_t size,
-		enum dma_data_direction direction)
-{
-}
-
-static inline void dma_sync_single_for_device(struct device *dev,
-		dma_addr_t dma_handle, size_t size,
-		enum dma_data_direction direction)
-{
-}
-
-static inline void dma_sync_sg_for_cpu(struct device *dev,
-		struct scatterlist *sgl, int nents,
-		enum dma_data_direction direction)
-{
-}
-
-static inline void dma_sync_sg_for_device(struct device *dev,
-		struct scatterlist *sgl, int nents,
-		enum dma_data_direction direction)
-{
-}
-
-static inline void dma_sync_single_range_for_cpu(struct device *dev,
-		dma_addr_t dma_handle, unsigned long offset, size_t size,
-		enum dma_data_direction direction)
-{
-}
-
-static inline void dma_sync_single_range_for_device(struct device *dev,
-		dma_addr_t dma_handle, unsigned long offset, size_t size,
-		enum dma_data_direction direction)
-{
-}
-#endif
-
 static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
 {
 #ifdef CONFIG_PPC64
-- 
cgit v1.2.3


From 4a9a6bfe707cfe5bcb0a20eabe240293a095cd10 Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Tue, 4 Aug 2009 19:08:27 +0000
Subject: powerpc: Handle SWIOTLB mapping error properly

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/dma-mapping.h | 5 +++++
 arch/powerpc/kernel/dma-swiotlb.c      | 3 ++-
 2 files changed, 7 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h
index 91217e4a0bf..4bd41b4051e 100644
--- a/arch/powerpc/include/asm/dma-mapping.h
+++ b/arch/powerpc/include/asm/dma-mapping.h
@@ -143,6 +143,11 @@ static inline void dma_free_coherent(struct device *dev, size_t size,
 
 static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
 {
+	struct dma_map_ops *dma_ops = get_dma_ops(dev);
+
+	if (dma_ops->mapping_error)
+		return dma_ops->mapping_error(dev, dma_addr);
+
 #ifdef CONFIG_PPC64
 	return (dma_addr == DMA_ERROR_CODE);
 #else
diff --git a/arch/powerpc/kernel/dma-swiotlb.c b/arch/powerpc/kernel/dma-swiotlb.c
index d1143a68d82..e96cbbd9b44 100644
--- a/arch/powerpc/kernel/dma-swiotlb.c
+++ b/arch/powerpc/kernel/dma-swiotlb.c
@@ -42,7 +42,8 @@ struct dma_map_ops swiotlb_dma_ops = {
 	.sync_single_range_for_cpu = swiotlb_sync_single_range_for_cpu,
 	.sync_single_range_for_device = swiotlb_sync_single_range_for_device,
 	.sync_sg_for_cpu = swiotlb_sync_sg_for_cpu,
-	.sync_sg_for_device = swiotlb_sync_sg_for_device
+	.sync_sg_for_device = swiotlb_sync_sg_for_device,
+	.mapping_error = swiotlb_dma_mapping_error,
 };
 
 void pci_dma_dev_setup_swiotlb(struct pci_dev *pdev)
-- 
cgit v1.2.3


From 80d3e8abb73dad3983fef2597b52cab8fbcd876b Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Tue, 4 Aug 2009 19:08:28 +0000
Subject: powerpc: Add CONFIG_DMA_API_DEBUG support

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/Kconfig                   |  1 +
 arch/powerpc/include/asm/dma-mapping.h | 11 ++++++++++-
 arch/powerpc/kernel/dma.c              | 11 +++++++++++
 3 files changed, 22 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 6078253c6d7..9e03991dc87 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -121,6 +121,7 @@ config PPC
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_LMB
 	select HAVE_DMA_ATTRS
+	select HAVE_DMA_API_DEBUG
 	select USE_GENERIC_SMP_HELPERS if SMP
 	select HAVE_OPROFILE
 	select HAVE_SYSCALL_WRAPPERS if PPC64
diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h
index 4bd41b4051e..cb2ca41dd52 100644
--- a/arch/powerpc/include/asm/dma-mapping.h
+++ b/arch/powerpc/include/asm/dma-mapping.h
@@ -127,9 +127,15 @@ static inline void *dma_alloc_coherent(struct device *dev, size_t size,
 				       dma_addr_t *dma_handle, gfp_t flag)
 {
 	struct dma_map_ops *dma_ops = get_dma_ops(dev);
+	void *cpu_addr;
 
 	BUG_ON(!dma_ops);
-	return dma_ops->alloc_coherent(dev, size, dma_handle, flag);
+
+	cpu_addr = dma_ops->alloc_coherent(dev, size, dma_handle, flag);
+
+	debug_dma_alloc_coherent(dev, size, *dma_handle, cpu_addr);
+
+	return cpu_addr;
 }
 
 static inline void dma_free_coherent(struct device *dev, size_t size,
@@ -138,6 +144,9 @@ static inline void dma_free_coherent(struct device *dev, size_t size,
 	struct dma_map_ops *dma_ops = get_dma_ops(dev);
 
 	BUG_ON(!dma_ops);
+
+	debug_dma_free_coherent(dev, size, cpu_addr, dma_handle);
+
 	dma_ops->free_coherent(dev, size, cpu_addr, dma_handle);
 }
 
diff --git a/arch/powerpc/kernel/dma.c b/arch/powerpc/kernel/dma.c
index c61f70e145a..21b784d7e7d 100644
--- a/arch/powerpc/kernel/dma.c
+++ b/arch/powerpc/kernel/dma.c
@@ -7,6 +7,7 @@
 
 #include <linux/device.h>
 #include <linux/dma-mapping.h>
+#include <linux/dma-debug.h>
 #include <linux/lmb.h>
 #include <asm/bug.h>
 #include <asm/abs_addr.h>
@@ -156,3 +157,13 @@ struct dma_map_ops dma_direct_ops = {
 #endif
 };
 EXPORT_SYMBOL(dma_direct_ops);
+
+#define PREALLOC_DMA_DEBUG_ENTRIES (1 << 16)
+
+static int __init dma_init(void)
+{
+       dma_debug_init(PREALLOC_DMA_DEBUG_ENTRIES);
+
+       return 0;
+}
+fs_initcall(dma_init);
-- 
cgit v1.2.3


From e3e1d15855206c85f4c9ed82746e81acfe13e5aa Mon Sep 17 00:00:00 2001
From: Becky Bruce <beckyb@kernel.crashing.org>
Date: Mon, 24 Aug 2009 06:15:36 +0000
Subject: powerpc: Name xpn & x fields in HW Hash PTE format

Previously, the 36-bit code was using these bits, but they had
never been named in the pte format definition.  This patch just
gives those fields their proper names and adds a comment that
they are only present on some processors.

There is no functional code change.

Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/mmu-hash32.h | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/mmu-hash32.h b/arch/powerpc/include/asm/mmu-hash32.h
index 382fc689f20..16f513e5cbd 100644
--- a/arch/powerpc/include/asm/mmu-hash32.h
+++ b/arch/powerpc/include/asm/mmu-hash32.h
@@ -55,21 +55,25 @@ struct ppc_bat {
 
 #ifndef __ASSEMBLY__
 
-/* Hardware Page Table Entry */
+/*
+ * Hardware Page Table Entry
+ * Note that the xpn and x bitfields are used only by processors that
+ * support extended addressing; otherwise, those bits are reserved.
+ */
 struct hash_pte {
 	unsigned long v:1;	/* Entry is valid */
 	unsigned long vsid:24;	/* Virtual segment identifier */
 	unsigned long h:1;	/* Hash algorithm indicator */
 	unsigned long api:6;	/* Abbreviated page index */
 	unsigned long rpn:20;	/* Real (physical) page number */
-	unsigned long    :3;	/* Unused */
+	unsigned long xpn:3;	/* Real page number bits 0-2, optional */
 	unsigned long r:1;	/* Referenced */
 	unsigned long c:1;	/* Changed */
 	unsigned long w:1;	/* Write-thru cache mode */
 	unsigned long i:1;	/* Cache inhibited */
 	unsigned long m:1;	/* Memory coherence */
 	unsigned long g:1;	/* Guarded */
-	unsigned long  :1;	/* Unused */
+	unsigned long x:1;	/* Real page number bit 3, optional */
 	unsigned long pp:2;	/* Page protection */
 };
 
-- 
cgit v1.2.3


From 23e55f92d4fd733365dd572ea6e9e211387123c2 Mon Sep 17 00:00:00 2001
From: Michael Wolf <mjw@linux.vnet.ibm.com>
Date: Thu, 20 Aug 2009 13:21:45 +0000
Subject: powerpc: Adjust base and index registers in Altivec macros

On POWER6 systems RA needs to be the base and RB the index.
If they are reversed you take a misdirect hit.

Signed-off-by: Mike Wolf <mjwolf@us.ibm.com>

----
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/ppc_asm.h | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/ppc_asm.h b/arch/powerpc/include/asm/ppc_asm.h
index dfae6e916df..498fe09263d 100644
--- a/arch/powerpc/include/asm/ppc_asm.h
+++ b/arch/powerpc/include/asm/ppc_asm.h
@@ -98,13 +98,13 @@ END_FTR_SECTION_IFCLR(CPU_FTR_PURR);					\
 #define REST_16FPRS(n, base)	REST_8FPRS(n, base); REST_8FPRS(n+8, base)
 #define REST_32FPRS(n, base)	REST_16FPRS(n, base); REST_16FPRS(n+16, base)
 
-#define SAVE_VR(n,b,base)	li b,THREAD_VR0+(16*(n));  stvx n,b,base
+#define SAVE_VR(n,b,base)	li b,THREAD_VR0+(16*(n));  stvx n,base,b
 #define SAVE_2VRS(n,b,base)	SAVE_VR(n,b,base); SAVE_VR(n+1,b,base)
 #define SAVE_4VRS(n,b,base)	SAVE_2VRS(n,b,base); SAVE_2VRS(n+2,b,base)
 #define SAVE_8VRS(n,b,base)	SAVE_4VRS(n,b,base); SAVE_4VRS(n+4,b,base)
 #define SAVE_16VRS(n,b,base)	SAVE_8VRS(n,b,base); SAVE_8VRS(n+8,b,base)
 #define SAVE_32VRS(n,b,base)	SAVE_16VRS(n,b,base); SAVE_16VRS(n+16,b,base)
-#define REST_VR(n,b,base)	li b,THREAD_VR0+(16*(n)); lvx n,b,base
+#define REST_VR(n,b,base)	li b,THREAD_VR0+(16*(n)); lvx n,base,b
 #define REST_2VRS(n,b,base)	REST_VR(n,b,base); REST_VR(n+1,b,base)
 #define REST_4VRS(n,b,base)	REST_2VRS(n,b,base); REST_2VRS(n+2,b,base)
 #define REST_8VRS(n,b,base)	REST_4VRS(n,b,base); REST_4VRS(n+4,b,base)
@@ -112,26 +112,26 @@ END_FTR_SECTION_IFCLR(CPU_FTR_PURR);					\
 #define REST_32VRS(n,b,base)	REST_16VRS(n,b,base); REST_16VRS(n+16,b,base)
 
 /* Save the lower 32 VSRs in the thread VSR region */
-#define SAVE_VSR(n,b,base)	li b,THREAD_VSR0+(16*(n));  STXVD2X(n,b,base)
+#define SAVE_VSR(n,b,base)	li b,THREAD_VSR0+(16*(n));  STXVD2X(n,base,b)
 #define SAVE_2VSRS(n,b,base)	SAVE_VSR(n,b,base); SAVE_VSR(n+1,b,base)
 #define SAVE_4VSRS(n,b,base)	SAVE_2VSRS(n,b,base); SAVE_2VSRS(n+2,b,base)
 #define SAVE_8VSRS(n,b,base)	SAVE_4VSRS(n,b,base); SAVE_4VSRS(n+4,b,base)
 #define SAVE_16VSRS(n,b,base)	SAVE_8VSRS(n,b,base); SAVE_8VSRS(n+8,b,base)
 #define SAVE_32VSRS(n,b,base)	SAVE_16VSRS(n,b,base); SAVE_16VSRS(n+16,b,base)
-#define REST_VSR(n,b,base)	li b,THREAD_VSR0+(16*(n)); LXVD2X(n,b,base)
+#define REST_VSR(n,b,base)	li b,THREAD_VSR0+(16*(n)); LXVD2X(n,base,b)
 #define REST_2VSRS(n,b,base)	REST_VSR(n,b,base); REST_VSR(n+1,b,base)
 #define REST_4VSRS(n,b,base)	REST_2VSRS(n,b,base); REST_2VSRS(n+2,b,base)
 #define REST_8VSRS(n,b,base)	REST_4VSRS(n,b,base); REST_4VSRS(n+4,b,base)
 #define REST_16VSRS(n,b,base)	REST_8VSRS(n,b,base); REST_8VSRS(n+8,b,base)
 #define REST_32VSRS(n,b,base)	REST_16VSRS(n,b,base); REST_16VSRS(n+16,b,base)
 /* Save the upper 32 VSRs (32-63) in the thread VSX region (0-31) */
-#define SAVE_VSRU(n,b,base)	li b,THREAD_VR0+(16*(n));  STXVD2X(n+32,b,base)
+#define SAVE_VSRU(n,b,base)	li b,THREAD_VR0+(16*(n));  STXVD2X(n+32,base,b)
 #define SAVE_2VSRSU(n,b,base)	SAVE_VSRU(n,b,base); SAVE_VSRU(n+1,b,base)
 #define SAVE_4VSRSU(n,b,base)	SAVE_2VSRSU(n,b,base); SAVE_2VSRSU(n+2,b,base)
 #define SAVE_8VSRSU(n,b,base)	SAVE_4VSRSU(n,b,base); SAVE_4VSRSU(n+4,b,base)
 #define SAVE_16VSRSU(n,b,base)	SAVE_8VSRSU(n,b,base); SAVE_8VSRSU(n+8,b,base)
 #define SAVE_32VSRSU(n,b,base)	SAVE_16VSRSU(n,b,base); SAVE_16VSRSU(n+16,b,base)
-#define REST_VSRU(n,b,base)	li b,THREAD_VR0+(16*(n)); LXVD2X(n+32,b,base)
+#define REST_VSRU(n,b,base)	li b,THREAD_VR0+(16*(n)); LXVD2X(n+32,base,b)
 #define REST_2VSRSU(n,b,base)	REST_VSRU(n,b,base); REST_VSRU(n+1,b,base)
 #define REST_4VSRSU(n,b,base)	REST_2VSRSU(n,b,base); REST_2VSRSU(n+2,b,base)
 #define REST_8VSRSU(n,b,base)	REST_4VSRSU(n,b,base); REST_4VSRSU(n+4,b,base)
-- 
cgit v1.2.3


From df5d6ecf8157245ef733db87597adb2c6e2510da Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@kernel.crashing.org>
Date: Mon, 24 Aug 2009 15:52:48 +0000
Subject: powerpc/mm: Add MMU features for TLB reservation & Paired MAS
 registers

Support for TLB reservation (or TLB Write Conditional) and Paired MAS
registers are optional for a processor implementation so we handle
them via MMU feature sections.

We currently only used paired MAS registers to access the full RPN + perm
bits that are kept in MAS7||MAS3.  We assume that if an implementation has
hardware page table at this time it also implements in TLB reservations.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/mmu.h |  9 +++++++++
 arch/powerpc/mm/tlb_low_64e.S  | 38 +++++++++++++++++++++++++++++++++++++-
 2 files changed, 46 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/mmu.h b/arch/powerpc/include/asm/mmu.h
index 2fcfefc6089..7ffbb65ff7a 100644
--- a/arch/powerpc/include/asm/mmu.h
+++ b/arch/powerpc/include/asm/mmu.h
@@ -58,6 +58,15 @@
  */
 #define MMU_FTR_TLBIE_206		ASM_CONST(0x00400000)
 
+/* Enable use of TLB reservation.  Processor should support tlbsrx.
+ * instruction and MAS0[WQ].
+ */
+#define MMU_FTR_USE_TLBRSRV		ASM_CONST(0x00800000)
+
+/* Use paired MAS registers (MAS7||MAS3, etc.)
+ */
+#define MMU_FTR_USE_PAIRED_MAS		ASM_CONST(0x01000000)
+
 #ifndef __ASSEMBLY__
 #include <asm/cputable.h>
 
diff --git a/arch/powerpc/mm/tlb_low_64e.S b/arch/powerpc/mm/tlb_low_64e.S
index cd92f62f9cf..ef1cccf7117 100644
--- a/arch/powerpc/mm/tlb_low_64e.S
+++ b/arch/powerpc/mm/tlb_low_64e.S
@@ -189,12 +189,16 @@ normal_tlb_miss:
 	clrrdi	r14,r14,3
 	or	r10,r15,r14
 
+BEGIN_MMU_FTR_SECTION
 	/* Set the TLB reservation and seach for existing entry. Then load
 	 * the entry.
 	 */
 	PPC_TLBSRX_DOT(0,r16)
 	ld	r14,0(r10)
 	beq	normal_tlb_miss_done
+MMU_FTR_SECTION_ELSE
+	ld	r14,0(r10)
+ALT_MMU_FTR_SECTION_END_IFSET(MMU_FTR_USE_TLBRSRV)
 
 finish_normal_tlb_miss:
 	/* Check if required permissions are met */
@@ -241,7 +245,14 @@ finish_normal_tlb_miss:
 	bne	1f
 	li	r11,MAS3_SW|MAS3_UW
 	andc	r15,r15,r11
-1:	mtspr	SPRN_MAS7_MAS3,r15
+1:
+BEGIN_MMU_FTR_SECTION
+	srdi	r16,r15,32
+	mtspr	SPRN_MAS3,r15
+	mtspr	SPRN_MAS7,r16
+MMU_FTR_SECTION_ELSE
+	mtspr	SPRN_MAS7_MAS3,r15
+ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_USE_PAIRED_MAS)
 
 	tlbwe
 
@@ -311,11 +322,13 @@ virt_page_table_tlb_miss:
 	rlwinm	r10,r10,0,16,1			/* Clear TID */
 	mtspr	SPRN_MAS1,r10
 1:
+BEGIN_MMU_FTR_SECTION
 	/* Search if we already have a TLB entry for that virtual address, and
 	 * if we do, bail out.
 	 */
 	PPC_TLBSRX_DOT(0,r16)
 	beq	virt_page_table_tlb_miss_done
+END_MMU_FTR_SECTION_IFSET(MMU_FTR_USE_TLBRSRV)
 
 	/* Now, we need to walk the page tables. First check if we are in
 	 * range.
@@ -367,10 +380,18 @@ virt_page_table_tlb_miss:
 	 */
 	clrldi	r11,r15,4		/* remove region ID from RPN */
 	ori	r10,r11,1		/* Or-in SR */
+
+BEGIN_MMU_FTR_SECTION
+	srdi	r16,r10,32
+	mtspr	SPRN_MAS3,r10
+	mtspr	SPRN_MAS7,r16
+MMU_FTR_SECTION_ELSE
 	mtspr	SPRN_MAS7_MAS3,r10
+ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_USE_PAIRED_MAS)
 
 	tlbwe
 
+BEGIN_MMU_FTR_SECTION
 virt_page_table_tlb_miss_done:
 
 	/* We have overriden MAS2:EPN but currently our primary TLB miss
@@ -394,6 +415,7 @@ virt_page_table_tlb_miss_done:
 	addi	r10,r11,-4
 	std	r10,PACA_EXTLB+EX_TLB_SIZE+EX_TLB_SRR0(r13)
 1:
+END_MMU_FTR_SECTION_IFSET(MMU_FTR_USE_TLBRSRV)
 	/* Return to caller, normal case */
 	TLB_MISS_STATS_X(MMSTAT_TLB_MISS_PT_OK);
 	TLB_MISS_EPILOG_SUCCESS
@@ -618,7 +640,14 @@ htw_tlb_miss:
 #else
 	ori	r10,r15,(BOOK3E_PAGESZ_4K << MAS3_SPSIZE_SHIFT)
 #endif
+
+BEGIN_MMU_FTR_SECTION
+	srdi	r16,r10,32
+	mtspr	SPRN_MAS3,r10
+	mtspr	SPRN_MAS7,r16
+MMU_FTR_SECTION_ELSE
 	mtspr	SPRN_MAS7_MAS3,r10
+ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_USE_PAIRED_MAS)
 
 	tlbwe
 
@@ -700,7 +729,14 @@ tlb_load_linear:
 	clrrdi	r10,r16,30		/* 1G page index */
 	clrldi	r10,r10,4		/* clear region bits */
 	ori	r10,r10,MAS3_SR|MAS3_SW|MAS3_SX
+
+BEGIN_MMU_FTR_SECTION
+	srdi	r16,r10,32
+	mtspr	SPRN_MAS3,r10
+	mtspr	SPRN_MAS7,r16
+MMU_FTR_SECTION_ELSE
 	mtspr	SPRN_MAS7_MAS3,r10
+ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_USE_PAIRED_MAS)
 
 	tlbwe
 
-- 
cgit v1.2.3


From f45c4486f70d0a6502e7499a8664cdc0bba84cd2 Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@kernel.crashing.org>
Date: Tue, 18 Aug 2009 19:08:30 +0000
Subject: powerpc/book3e-64: Move the default cpu table entry

Move the default cpu entry table for CONFIG_PPC_BOOK3E_64 to the
very end since we will probably want to support both 32-bit and
64-bit kernels for some processors that are higher up in the list.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/cputable.c | 49 +++++++++++++++++++++++-------------------
 1 file changed, 27 insertions(+), 22 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index 9f38ecb1785..0b9c9135922 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -89,8 +89,12 @@ extern void __restore_cpu_power7(void);
 #define COMMON_USER_PA6T	(COMMON_USER_PPC64 | PPC_FEATURE_PA6T |\
 				 PPC_FEATURE_TRUE_LE | \
 				 PPC_FEATURE_HAS_ALTIVEC_COMP)
+#ifdef CONFIG_PPC_BOOK3E_64
+#define COMMON_USER_BOOKE	(COMMON_USER_PPC64 | PPC_FEATURE_BOOKE)
+#else
 #define COMMON_USER_BOOKE	(PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU | \
 				 PPC_FEATURE_BOOKE)
+#endif
 
 static struct cpu_spec __initdata cpu_specs[] = {
 #ifdef CONFIG_PPC_BOOK3S_64
@@ -509,28 +513,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.platform		= "power4",
 	}
 #endif	/* CONFIG_PPC_BOOK3S_64 */
-#ifdef CONFIG_PPC_BOOK3E_64
-	{	/* This is a default entry to get going, to be replaced by
-		 * a real one at some stage
-		 */
-#define CPU_FTRS_BASE_BOOK3E	(CPU_FTR_USE_TB | \
-	    CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_SMT | \
-	    CPU_FTR_NODSISRALIGN | CPU_FTR_NOEXECUTE)
-		.pvr_mask		= 0x00000000,
-		.pvr_value		= 0x00000000,
-		.cpu_name		= "Book3E",
-		.cpu_features		= CPU_FTRS_BASE_BOOK3E,
-		.cpu_user_features	= COMMON_USER_PPC64,
-		.mmu_features		= MMU_FTR_TYPE_3E | MMU_FTR_USE_TLBILX |
-					  MMU_FTR_USE_TLBIVAX_BCAST |
-					  MMU_FTR_LOCK_BCAST_INVAL,
-		.icache_bsize		= 64,
-		.dcache_bsize		= 64,
-		.num_pmcs		= 0,
-		.machine_check		= machine_check_generic,
-		.platform		= "power6",
-	},
-#endif
 
 #ifdef CONFIG_PPC32
 #if CLASSIC_PPC
@@ -1846,6 +1828,29 @@ static struct cpu_spec __initdata cpu_specs[] = {
 	}
 #endif /* CONFIG_E500 */
 #endif /* CONFIG_PPC32 */
+
+#ifdef CONFIG_PPC_BOOK3E_64
+	{	/* This is a default entry to get going, to be replaced by
+		 * a real one at some stage
+		 */
+#define CPU_FTRS_BASE_BOOK3E	(CPU_FTR_USE_TB | \
+	    CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_SMT | \
+	    CPU_FTR_NODSISRALIGN | CPU_FTR_NOEXECUTE)
+		.pvr_mask		= 0x00000000,
+		.pvr_value		= 0x00000000,
+		.cpu_name		= "Book3E",
+		.cpu_features		= CPU_FTRS_BASE_BOOK3E,
+		.cpu_user_features	= COMMON_USER_PPC64,
+		.mmu_features		= MMU_FTR_TYPE_3E | MMU_FTR_USE_TLBILX |
+					  MMU_FTR_USE_TLBIVAX_BCAST |
+					  MMU_FTR_LOCK_BCAST_INVAL,
+		.icache_bsize		= 64,
+		.dcache_bsize		= 64,
+		.num_pmcs		= 0,
+		.machine_check		= machine_check_generic,
+		.platform		= "power6",
+	},
+#endif
 };
 
 static struct cpu_spec the_cpu_spec;
-- 
cgit v1.2.3


From 6c188829d2c20a1d02aedb13db34b3ca2a8f0dc4 Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@kernel.crashing.org>
Date: Tue, 18 Aug 2009 19:08:31 +0000
Subject: powerpc/book3e-64: Wait til generic_calibrate_decr to enable
 decrementer

Match what we do on 32-bit Book-E processors and enable the decrementer
in generic_calibrate_decr.  We need to make sure we disable the
decrementer early in boot since we currently use lazy (soft) interrupt
on 64-bit Book-E and possible get a decrementer exception before we
are ready for it.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/exceptions-64e.S | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/exceptions-64e.S b/arch/powerpc/kernel/exceptions-64e.S
index 695d4847d22..3611b0e7d46 100644
--- a/arch/powerpc/kernel/exceptions-64e.S
+++ b/arch/powerpc/kernel/exceptions-64e.S
@@ -774,9 +774,11 @@ _STATIC(init_thread_book3e)
 	/* Make sure interrupts are off */
 	wrteei	0
 
-	/* disable watchdog and FIT and enable DEC interrupts */
-	lis	r3,TCR_DIE@h
+	/* disable all timers and clear out status */
+	li	r3,0
 	mtspr	SPRN_TCR,r3
+	mfspr	r3,SPRN_TSR
+	mtspr	SPRN_TSR,r3
 
 	blr
 
-- 
cgit v1.2.3


From 4b98d9e713a03bd79ced8800e24a56359f9effbf Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@kernel.crashing.org>
Date: Tue, 18 Aug 2009 19:08:32 +0000
Subject: powerpc/book3e-64: Add helper function to setup IVORs

Not all 64-bit Book-3E parts will have fixed IVORs so add a function that
cpusetup code can call to setup the base IVORs (0..15) to match the fixed
offsets.  We need to 'or' part of interrupt_base_book3e into the IVORs
since on parts that have them the IVPR doesn't extend as far down.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/exception-64e.h |  4 ++++
 arch/powerpc/kernel/exceptions-64e.S     | 19 +++++++++++++++++++
 2 files changed, 23 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/exception-64e.h b/arch/powerpc/include/asm/exception-64e.h
index 94cb3d79d12..6d53f311d94 100644
--- a/arch/powerpc/include/asm/exception-64e.h
+++ b/arch/powerpc/include/asm/exception-64e.h
@@ -196,6 +196,10 @@ exc_##label##_book3e:
 #define TLB_MISS_STATS_SAVE_INFO
 #endif
 
+#define SET_IVOR(vector_number, vector_offset)	\
+	li	r3,vector_offset@l; 		\
+	ori	r3,r3,interrupt_base_book3e@l;	\
+	mtspr	SPRN_IVOR##vector_number,r3;
 
 #endif /* _ASM_POWERPC_EXCEPTION_64E_H */
 
diff --git a/arch/powerpc/kernel/exceptions-64e.S b/arch/powerpc/kernel/exceptions-64e.S
index 3611b0e7d46..662236c7224 100644
--- a/arch/powerpc/kernel/exceptions-64e.S
+++ b/arch/powerpc/kernel/exceptions-64e.S
@@ -782,5 +782,24 @@ _STATIC(init_thread_book3e)
 
 	blr
 
+_GLOBAL(__setup_base_ivors)
+	SET_IVOR(0, 0x020) /* Critical Input */
+	SET_IVOR(1, 0x000) /* Machine Check */
+	SET_IVOR(2, 0x060) /* Data Storage */ 
+	SET_IVOR(3, 0x080) /* Instruction Storage */
+	SET_IVOR(4, 0x0a0) /* External Input */ 
+	SET_IVOR(5, 0x0c0) /* Alignment */ 
+	SET_IVOR(6, 0x0e0) /* Program */ 
+	SET_IVOR(7, 0x100) /* FP Unavailable */ 
+	SET_IVOR(8, 0x120) /* System Call */ 
+	SET_IVOR(9, 0x140) /* Auxiliary Processor Unavailable */ 
+	SET_IVOR(10, 0x160) /* Decrementer */ 
+	SET_IVOR(11, 0x180) /* Fixed Interval Timer */ 
+	SET_IVOR(12, 0x1a0) /* Watchdog Timer */ 
+	SET_IVOR(13, 0x1c0) /* Data TLB Error */ 
+	SET_IVOR(14, 0x1e0) /* Instruction TLB Error */
+	SET_IVOR(15, 0x040) /* Debug */
 
+	sync
 
+	blr
-- 
cgit v1.2.3


From bb1af71ecbfdbecbe9f7e43f703da5840b76c2e4 Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@kernel.crashing.org>
Date: Tue, 18 Aug 2009 19:08:33 +0000
Subject: powerpc/book3e-64: Add support to initial_tlb_book3e for non-HES TLB

We now search through TLBnCFG looking for the first array that has IPROT
support (we assume that there is only one).  If that TLB has hardware
entry select (HES) support we use the existing code and with the proper
TLB select (the HES code still needs to clean up bolted entries from
firmware).  The non-HES code is pretty similiar to the 32-bit FSL Book-E
code but does make some new assumtions (like that we have tlbilx) and
simplifies things down a bit.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/reg_booke.h |   2 +
 arch/powerpc/kernel/exceptions-64e.S | 204 ++++++++++++++++++++++++++++++++++-
 2 files changed, 202 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h
index 9bb81d99b76..3bf78350552 100644
--- a/arch/powerpc/include/asm/reg_booke.h
+++ b/arch/powerpc/include/asm/reg_booke.h
@@ -108,6 +108,8 @@
 #define SPRN_PID2	0x27A	/* Process ID Register 2 */
 #define SPRN_TLB0CFG	0x2B0	/* TLB 0 Config Register */
 #define SPRN_TLB1CFG	0x2B1	/* TLB 1 Config Register */
+#define SPRN_TLB2CFG	0x2B2	/* TLB 2 Config Register */
+#define SPRN_TLB3CFG	0x2B3	/* TLB 3 Config Register */
 #define SPRN_EPR	0x2BE	/* External Proxy Register */
 #define SPRN_CCR1	0x378	/* Core Configuration Register 1 */
 #define SPRN_ZPR	0x3B0	/* Zone Protection Register (40x) */
diff --git a/arch/powerpc/kernel/exceptions-64e.S b/arch/powerpc/kernel/exceptions-64e.S
index 662236c7224..9048f96237f 100644
--- a/arch/powerpc/kernel/exceptions-64e.S
+++ b/arch/powerpc/kernel/exceptions-64e.S
@@ -616,18 +616,214 @@ bad_stack_book3e:
  * Setup the initial TLB for a core. This current implementation
  * assume that whatever we are running off will not conflict with
  * the new mapping at PAGE_OFFSET.
- * We also make various assumptions about the processor we run on,
- * this might have to be made more flexible based on the content
- * of MMUCFG and friends.
  */
 _GLOBAL(initial_tlb_book3e)
 
+	/* Look for the first TLB with IPROT set */
+	mfspr	r4,SPRN_TLB0CFG
+	andi.	r3,r4,TLBnCFG_IPROT
+	lis	r3,MAS0_TLBSEL(0)@h
+	bne	found_iprot
+
+	mfspr	r4,SPRN_TLB1CFG
+	andi.	r3,r4,TLBnCFG_IPROT
+	lis	r3,MAS0_TLBSEL(1)@h
+	bne	found_iprot
+
+	mfspr	r4,SPRN_TLB2CFG
+	andi.	r3,r4,TLBnCFG_IPROT
+	lis	r3,MAS0_TLBSEL(2)@h
+	bne	found_iprot
+
+	lis	r3,MAS0_TLBSEL(3)@h
+	mfspr	r4,SPRN_TLB3CFG
+	/* fall through */
+
+found_iprot:
+	andi.	r5,r4,TLBnCFG_HES
+	bne	have_hes
+
+	mflr	r8				/* save LR */
+/* 1. Find the index of the entry we're executing in
+ *
+ * r3 = MAS0_TLBSEL (for the iprot array)
+ * r4 = SPRN_TLBnCFG
+ */
+	bl	invstr				/* Find our address */
+invstr:	mflr	r6				/* Make it accessible */
+	mfmsr	r7
+	rlwinm	r5,r7,27,31,31			/* extract MSR[IS] */
+	mfspr	r7,SPRN_PID
+	slwi	r7,r7,16
+	or	r7,r7,r5
+	mtspr	SPRN_MAS6,r7
+	tlbsx	0,r6				/* search MSR[IS], SPID=PID */
+
+	mfspr	r3,SPRN_MAS0
+	rlwinm	r5,r3,16,20,31			/* Extract MAS0(Entry) */
+
+	mfspr	r7,SPRN_MAS1			/* Insure IPROT set */
+	oris	r7,r7,MAS1_IPROT@h
+	mtspr	SPRN_MAS1,r7
+	tlbwe
+
+/* 2. Invalidate all entries except the entry we're executing in
+ *
+ * r3 = MAS0 w/TLBSEL & ESEL for the entry we are running in
+ * r4 = SPRN_TLBnCFG
+ * r5 = ESEL of entry we are running in
+ */
+	andi.	r4,r4,TLBnCFG_N_ENTRY		/* Extract # entries */
+	li	r6,0				/* Set Entry counter to 0 */
+1:	mr	r7,r3				/* Set MAS0(TLBSEL) */
+	rlwimi	r7,r6,16,4,15			/* Setup MAS0 = TLBSEL | ESEL(r6) */
+	mtspr	SPRN_MAS0,r7
+	tlbre
+	mfspr	r7,SPRN_MAS1
+	rlwinm	r7,r7,0,2,31			/* Clear MAS1 Valid and IPROT */
+	cmpw	r5,r6
+	beq	skpinv				/* Dont update the current execution TLB */
+	mtspr	SPRN_MAS1,r7
+	tlbwe
+	isync
+skpinv:	addi	r6,r6,1				/* Increment */
+	cmpw	r6,r4				/* Are we done? */
+	bne	1b				/* If not, repeat */
+
+	/* Invalidate all TLBs */
+	PPC_TLBILX_ALL(0,0)
+	sync
+	isync
+
+/* 3. Setup a temp mapping and jump to it
+ *
+ * r3 = MAS0 w/TLBSEL & ESEL for the entry we are running in
+ * r5 = ESEL of entry we are running in
+ */
+	andi.	r7,r5,0x1	/* Find an entry not used and is non-zero */
+	addi	r7,r7,0x1
+	mr	r4,r3		/* Set MAS0(TLBSEL) = 1 */
+	mtspr	SPRN_MAS0,r4
+	tlbre
+
+	rlwimi	r4,r7,16,4,15	/* Setup MAS0 = TLBSEL | ESEL(r7) */
+	mtspr	SPRN_MAS0,r4
+
+	mfspr	r7,SPRN_MAS1
+	xori	r6,r7,MAS1_TS		/* Setup TMP mapping in the other Address space */
+	mtspr	SPRN_MAS1,r6
+
+	tlbwe
+
+	mfmsr	r6
+	xori	r6,r6,MSR_IS
+	mtspr	SPRN_SRR1,r6
+	bl	1f		/* Find our address */
+1:	mflr	r6
+	addi	r6,r6,(2f - 1b)
+	mtspr	SPRN_SRR0,r6
+	rfi
+2:
+
+/* 4. Clear out PIDs & Search info
+ *
+ * r3 = MAS0 w/TLBSEL & ESEL for the entry we started in
+ * r4 = MAS0 w/TLBSEL & ESEL for the temp mapping
+ * r5 = MAS3
+ */
+	li	r6,0
+	mtspr   SPRN_MAS6,r6
+	mtspr	SPRN_PID,r6
+
+/* 5. Invalidate mapping we started in
+ *
+ * r3 = MAS0 w/TLBSEL & ESEL for the entry we started in
+ * r4 = MAS0 w/TLBSEL & ESEL for the temp mapping
+ * r5 = MAS3
+ */
+	mtspr	SPRN_MAS0,r3
+	tlbre
+	mfspr	r6,SPRN_MAS1
+	rlwinm	r6,r6,0,2,0	/* clear IPROT */
+	mtspr	SPRN_MAS1,r6
+	tlbwe
+
+	/* Invalidate TLB1 */
+	PPC_TLBILX_ALL(0,0)
+	sync
+	isync
+
+/* The mapping only needs to be cache-coherent on SMP */
+#ifdef CONFIG_SMP
+#define M_IF_SMP	MAS2_M
+#else
+#define M_IF_SMP	0
+#endif
+
+/* 6. Setup KERNELBASE mapping in TLB[0]
+ *
+ * r3 = MAS0 w/TLBSEL & ESEL for the entry we started in
+ * r4 = MAS0 w/TLBSEL & ESEL for the temp mapping
+ * r5 = MAS3
+ */
+	rlwinm	r3,r3,0,16,3	/* clear ESEL */
+	mtspr	SPRN_MAS0,r3
+	lis	r6,(MAS1_VALID|MAS1_IPROT)@h
+	ori	r6,r6,(MAS1_TSIZE(BOOK3E_PAGESZ_1GB))@l
+	mtspr	SPRN_MAS1,r6
+
+	LOAD_REG_IMMEDIATE(r6, PAGE_OFFSET | M_IF_SMP)
+	mtspr	SPRN_MAS2,r6
+
+	rlwinm	r5,r5,0,0,25
+	ori	r5,r5,MAS3_SR | MAS3_SW | MAS3_SX
+	mtspr	SPRN_MAS3,r5
+	li	r5,-1
+	rlwinm	r5,r5,0,0,25
+
+	tlbwe
+
+/* 7. Jump to KERNELBASE mapping
+ *
+ * r4 = MAS0 w/TLBSEL & ESEL for the temp mapping
+ */
+	/* Now we branch the new virtual address mapped by this entry */
+	LOAD_REG_IMMEDIATE(r6,2f)
+	lis	r7,MSR_KERNEL@h
+	ori	r7,r7,MSR_KERNEL@l
+	mtspr	SPRN_SRR0,r6
+	mtspr	SPRN_SRR1,r7
+	rfi				/* start execution out of TLB1[0] entry */
+2:
+
+/* 8. Clear out the temp mapping
+ *
+ * r4 = MAS0 w/TLBSEL & ESEL for the entry we are running in
+ */
+	mtspr	SPRN_MAS0,r4
+	tlbre
+	mfspr	r5,SPRN_MAS1
+	rlwinm	r5,r5,0,2,0	/* clear IPROT */
+	mtspr	SPRN_MAS1,r5
+	tlbwe
+
+	/* Invalidate TLB1 */
+	PPC_TLBILX_ALL(0,0)
+	sync
+	isync
+
+	/* We translate LR and return */
+	tovirt(r8,r8)
+	mtlr	r8
+	blr
+
+have_hes:
 	/* Setup MAS 0,1,2,3 and 7 for tlbwe of a 1G entry that maps the
 	 * kernel linear mapping. We also set MAS8 once for all here though
 	 * that will have to be made dependent on whether we are running under
 	 * a hypervisor I suppose.
 	 */
-	li	r3,MAS0_HES | MAS0_WQ_ALLWAYS
+	ori	r3,r3,MAS0_HES | MAS0_WQ_ALLWAYS
 	mtspr	SPRN_MAS0,r3
 	lis	r3,(MAS1_VALID | MAS1_IPROT)@h
 	ori	r3,r3,BOOK3E_PAGESZ_1GB << MAS1_TSIZE_SHIFT
-- 
cgit v1.2.3


From ae14e13a4c8bb091dfd5606fd76c9cd272090ab7 Mon Sep 17 00:00:00 2001
From: Grant Likely <grant.likely@secretlab.ca>
Date: Tue, 25 Aug 2009 20:07:02 +0000
Subject: powerpc/pci: Remove dead checks for CONFIG_PPC_OF

PPC_OF is always selected for arch/powerpc.  This patch removes the stale
#defines

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/pci-common.c | 8 --------
 arch/powerpc/kernel/pci_32.c     | 9 ---------
 2 files changed, 17 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index 7585f1fc26d..158a78ae634 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -176,8 +176,6 @@ int pci_domain_nr(struct pci_bus *bus)
 }
 EXPORT_SYMBOL(pci_domain_nr);
 
-#ifdef CONFIG_PPC_OF
-
 /* This routine is meant to be used early during boot, when the
  * PCI bus numbers have not yet been assigned, and you need to
  * issue PCI config cycles to an OF device.
@@ -210,17 +208,11 @@ static ssize_t pci_show_devspec(struct device *dev,
 	return sprintf(buf, "%s", np->full_name);
 }
 static DEVICE_ATTR(devspec, S_IRUGO, pci_show_devspec, NULL);
-#endif /* CONFIG_PPC_OF */
 
 /* Add sysfs properties */
 int pcibios_add_platform_entries(struct pci_dev *pdev)
 {
-#ifdef CONFIG_PPC_OF
 	return device_create_file(&pdev->dev, &dev_attr_devspec);
-#else
-	return 0;
-#endif /* CONFIG_PPC_OF */
-
 }
 
 char __devinit *pcibios_setup(char *str)
diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c
index 3ae1c666ff9..1e807fe7ad2 100644
--- a/arch/powerpc/kernel/pci_32.c
+++ b/arch/powerpc/kernel/pci_32.c
@@ -34,9 +34,7 @@ int pcibios_assign_bus_offset = 1;
 void pcibios_make_OF_bus_map(void);
 
 static void fixup_cpc710_pci64(struct pci_dev* dev);
-#ifdef CONFIG_PPC_OF
 static u8* pci_to_OF_bus_map;
-#endif
 
 /* By default, we don't re-assign bus numbers. We do this only on
  * some pmacs
@@ -83,7 +81,6 @@ fixup_cpc710_pci64(struct pci_dev* dev)
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_IBM,	PCI_DEVICE_ID_IBM_CPC710_PCI64,	fixup_cpc710_pci64);
 
-#ifdef CONFIG_PPC_OF
 /*
  * Functions below are used on OpenFirmware machines.
  */
@@ -357,12 +354,6 @@ pci_create_OF_bus_map(void)
 	}
 }
 
-#else /* CONFIG_PPC_OF */
-void pcibios_make_OF_bus_map(void)
-{
-}
-#endif /* CONFIG_PPC_OF */
-
 static void __devinit pcibios_scan_phb(struct pci_controller *hose)
 {
 	struct pci_bus *bus;
-- 
cgit v1.2.3


From fbe65447197789a3ccccc27755956f6a4c445089 Mon Sep 17 00:00:00 2001
From: Grant Likely <grant.likely@secretlab.ca>
Date: Tue, 25 Aug 2009 20:07:11 +0000
Subject: powerpc/pci: move pci_64.c device tree scanning code into
 pci-common.c

The PCI device tree scanning code in pci_64.c is some useful functionality.
It allows PCI devices to be described in the device tree instead of being
probed for, which in turn allows pci devices to use all of the device tree
facilities to describe complex PCI bus architectures like GPIO and IRQ
routing (perhaps not a common situation for desktop or server systems,
but useful for embedded systems with on-board PCI devices).

This patch moves the device tree scanning into pci-common.c so it is
available for 32-bit powerpc machines too.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/pci-bridge.h |   5 -
 arch/powerpc/include/asm/pci.h        |   5 +
 arch/powerpc/kernel/Makefile          |   2 +-
 arch/powerpc/kernel/pci-common.c      |   1 -
 arch/powerpc/kernel/pci_64.c          | 289 ---------------------------
 arch/powerpc/kernel/pci_of_scan.c     | 358 ++++++++++++++++++++++++++++++++++
 6 files changed, 364 insertions(+), 296 deletions(-)
 create mode 100644 arch/powerpc/kernel/pci_of_scan.c

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h
index 4c61fa0b8d7..3faf575f6b0 100644
--- a/arch/powerpc/include/asm/pci-bridge.h
+++ b/arch/powerpc/include/asm/pci-bridge.h
@@ -284,11 +284,6 @@ static inline int isa_vaddr_is_ioport(void __iomem *address)
 extern int pcibios_unmap_io_space(struct pci_bus *bus);
 extern int pcibios_map_io_space(struct pci_bus *bus);
 
-/* Return values for ppc_md.pci_probe_mode function */
-#define PCI_PROBE_NONE		-1	/* Don't look at this bus at all */
-#define PCI_PROBE_NORMAL	0	/* Do normal PCI probing */
-#define PCI_PROBE_DEVTREE	1	/* Instantiate from device tree */
-
 #ifdef CONFIG_NUMA
 #define PHB_SET_NODE(PHB, NODE)		((PHB)->node = (NODE))
 #else
diff --git a/arch/powerpc/include/asm/pci.h b/arch/powerpc/include/asm/pci.h
index 7ae46d7e270..b856a837b4a 100644
--- a/arch/powerpc/include/asm/pci.h
+++ b/arch/powerpc/include/asm/pci.h
@@ -22,6 +22,11 @@
 
 #include <asm-generic/pci-dma-compat.h>
 
+/* Return values for ppc_md.pci_probe_mode function */
+#define PCI_PROBE_NONE		-1	/* Don't look at this bus at all */
+#define PCI_PROBE_NORMAL	0	/* Do normal PCI probing */
+#define PCI_PROBE_DEVTREE	1	/* Instantiate from device tree */
+
 #define PCIBIOS_MIN_IO		0x1000
 #define PCIBIOS_MIN_MEM		0x10000000
 
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index 7c83edbc215..569f79ccd31 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -88,7 +88,7 @@ obj-$(CONFIG_SWIOTLB)		+= dma-swiotlb.o
 
 pci64-$(CONFIG_PPC64)		+= pci_dn.o isa-bridge.o
 obj-$(CONFIG_PCI)		+= pci_$(CONFIG_WORD_SIZE).o $(pci64-y) \
-				   pci-common.o
+				   pci-common.o pci_of_scan.o
 obj-$(CONFIG_PCI_MSI)		+= msi.o
 obj-$(CONFIG_KEXEC)		+= machine_kexec.o crash.o \
 				   machine_kexec_$(CONFIG_WORD_SIZE).o
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index 158a78ae634..725ea9144e3 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -1617,4 +1617,3 @@ void __devinit pcibios_setup_phb_resources(struct pci_controller *hose)
 		 (unsigned long)hose->io_base_virt - _IO_BASE);
 
 }
-
diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c
index 9e8902fa14c..4d5b4ced7e4 100644
--- a/arch/powerpc/kernel/pci_64.c
+++ b/arch/powerpc/kernel/pci_64.c
@@ -43,295 +43,6 @@ unsigned long pci_probe_only = 1;
 unsigned long pci_io_base = ISA_IO_BASE;
 EXPORT_SYMBOL(pci_io_base);
 
-static u32 get_int_prop(struct device_node *np, const char *name, u32 def)
-{
-	const u32 *prop;
-	int len;
-
-	prop = of_get_property(np, name, &len);
-	if (prop && len >= 4)
-		return *prop;
-	return def;
-}
-
-static unsigned int pci_parse_of_flags(u32 addr0, int bridge)
-{
-	unsigned int flags = 0;
-
-	if (addr0 & 0x02000000) {
-		flags = IORESOURCE_MEM | PCI_BASE_ADDRESS_SPACE_MEMORY;
-		flags |= (addr0 >> 22) & PCI_BASE_ADDRESS_MEM_TYPE_64;
-		flags |= (addr0 >> 28) & PCI_BASE_ADDRESS_MEM_TYPE_1M;
-		if (addr0 & 0x40000000)
-			flags |= IORESOURCE_PREFETCH
-				 | PCI_BASE_ADDRESS_MEM_PREFETCH;
-		/* Note: We don't know whether the ROM has been left enabled
-		 * by the firmware or not. We mark it as disabled (ie, we do
-		 * not set the IORESOURCE_ROM_ENABLE flag) for now rather than
-		 * do a config space read, it will be force-enabled if needed
-		 */
-		if (!bridge && (addr0 & 0xff) == 0x30)
-			flags |= IORESOURCE_READONLY;
-	} else if (addr0 & 0x01000000)
-		flags = IORESOURCE_IO | PCI_BASE_ADDRESS_SPACE_IO;
-	if (flags)
-		flags |= IORESOURCE_SIZEALIGN;
-	return flags;
-}
-
-
-static void pci_parse_of_addrs(struct device_node *node, struct pci_dev *dev)
-{
-	u64 base, size;
-	unsigned int flags;
-	struct resource *res;
-	const u32 *addrs;
-	u32 i;
-	int proplen;
-
-	addrs = of_get_property(node, "assigned-addresses", &proplen);
-	if (!addrs)
-		return;
-	pr_debug("    parse addresses (%d bytes) @ %p\n", proplen, addrs);
-	for (; proplen >= 20; proplen -= 20, addrs += 5) {
-		flags = pci_parse_of_flags(addrs[0], 0);
-		if (!flags)
-			continue;
-		base = of_read_number(&addrs[1], 2);
-		size = of_read_number(&addrs[3], 2);
-		if (!size)
-			continue;
-		i = addrs[0] & 0xff;
-		pr_debug("  base: %llx, size: %llx, i: %x\n",
-			 (unsigned long long)base,
-			 (unsigned long long)size, i);
-
-		if (PCI_BASE_ADDRESS_0 <= i && i <= PCI_BASE_ADDRESS_5) {
-			res = &dev->resource[(i - PCI_BASE_ADDRESS_0) >> 2];
-		} else if (i == dev->rom_base_reg) {
-			res = &dev->resource[PCI_ROM_RESOURCE];
-			flags |= IORESOURCE_READONLY | IORESOURCE_CACHEABLE;
-		} else {
-			printk(KERN_ERR "PCI: bad cfg reg num 0x%x\n", i);
-			continue;
-		}
-		res->start = base;
-		res->end = base + size - 1;
-		res->flags = flags;
-		res->name = pci_name(dev);
-	}
-}
-
-struct pci_dev *of_create_pci_dev(struct device_node *node,
-				 struct pci_bus *bus, int devfn)
-{
-	struct pci_dev *dev;
-	const char *type;
-
-	dev = alloc_pci_dev();
-	if (!dev)
-		return NULL;
-	type = of_get_property(node, "device_type", NULL);
-	if (type == NULL)
-		type = "";
-
-	pr_debug("    create device, devfn: %x, type: %s\n", devfn, type);
-
-	dev->bus = bus;
-	dev->sysdata = node;
-	dev->dev.parent = bus->bridge;
-	dev->dev.bus = &pci_bus_type;
-	dev->devfn = devfn;
-	dev->multifunction = 0;		/* maybe a lie? */
-
-	dev->vendor = get_int_prop(node, "vendor-id", 0xffff);
-	dev->device = get_int_prop(node, "device-id", 0xffff);
-	dev->subsystem_vendor = get_int_prop(node, "subsystem-vendor-id", 0);
-	dev->subsystem_device = get_int_prop(node, "subsystem-id", 0);
-
-	dev->cfg_size = pci_cfg_space_size(dev);
-
-	dev_set_name(&dev->dev, "%04x:%02x:%02x.%d", pci_domain_nr(bus),
-		dev->bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn));
-	dev->class = get_int_prop(node, "class-code", 0);
-	dev->revision = get_int_prop(node, "revision-id", 0);
-
-	pr_debug("    class: 0x%x\n", dev->class);
-	pr_debug("    revision: 0x%x\n", dev->revision);
-
-	dev->current_state = 4;		/* unknown power state */
-	dev->error_state = pci_channel_io_normal;
-	dev->dma_mask = 0xffffffff;
-
-	if (!strcmp(type, "pci") || !strcmp(type, "pciex")) {
-		/* a PCI-PCI bridge */
-		dev->hdr_type = PCI_HEADER_TYPE_BRIDGE;
-		dev->rom_base_reg = PCI_ROM_ADDRESS1;
-	} else if (!strcmp(type, "cardbus")) {
-		dev->hdr_type = PCI_HEADER_TYPE_CARDBUS;
-	} else {
-		dev->hdr_type = PCI_HEADER_TYPE_NORMAL;
-		dev->rom_base_reg = PCI_ROM_ADDRESS;
-		/* Maybe do a default OF mapping here */
-		dev->irq = NO_IRQ;
-	}
-
-	pci_parse_of_addrs(node, dev);
-
-	pr_debug("    adding to system ...\n");
-
-	pci_device_add(dev, bus);
-
-	return dev;
-}
-EXPORT_SYMBOL(of_create_pci_dev);
-
-static void __devinit __of_scan_bus(struct device_node *node,
-				    struct pci_bus *bus, int rescan_existing)
-{
-	struct device_node *child;
-	const u32 *reg;
-	int reglen, devfn;
-	struct pci_dev *dev;
-
-	pr_debug("of_scan_bus(%s) bus no %d... \n",
-		 node->full_name, bus->number);
-
-	/* Scan direct children */
-	for_each_child_of_node(node, child) {
-		pr_debug("  * %s\n", child->full_name);
-		reg = of_get_property(child, "reg", &reglen);
-		if (reg == NULL || reglen < 20)
-			continue;
-		devfn = (reg[0] >> 8) & 0xff;
-
-		/* create a new pci_dev for this device */
-		dev = of_create_pci_dev(child, bus, devfn);
-		if (!dev)
-			continue;
-		pr_debug("    dev header type: %x\n", dev->hdr_type);
-	}
-
-	/* Apply all fixups necessary. We don't fixup the bus "self"
-	 * for an existing bridge that is being rescanned
-	 */
-	if (!rescan_existing)
-		pcibios_setup_bus_self(bus);
-	pcibios_setup_bus_devices(bus);
-
-	/* Now scan child busses */
-	list_for_each_entry(dev, &bus->devices, bus_list) {
-		if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE ||
-		    dev->hdr_type == PCI_HEADER_TYPE_CARDBUS) {
-			struct device_node *child = pci_device_to_OF_node(dev);
-			if (dev)
-				of_scan_pci_bridge(child, dev);
-		}
-	}
-}
-
-void __devinit of_scan_bus(struct device_node *node,
-			   struct pci_bus *bus)
-{
-	__of_scan_bus(node, bus, 0);
-}
-EXPORT_SYMBOL_GPL(of_scan_bus);
-
-void __devinit of_rescan_bus(struct device_node *node,
-			     struct pci_bus *bus)
-{
-	__of_scan_bus(node, bus, 1);
-}
-EXPORT_SYMBOL_GPL(of_rescan_bus);
-
-void __devinit of_scan_pci_bridge(struct device_node *node,
-				  struct pci_dev *dev)
-{
-	struct pci_bus *bus;
-	const u32 *busrange, *ranges;
-	int len, i, mode;
-	struct resource *res;
-	unsigned int flags;
-	u64 size;
-
-	pr_debug("of_scan_pci_bridge(%s)\n", node->full_name);
-
-	/* parse bus-range property */
-	busrange = of_get_property(node, "bus-range", &len);
-	if (busrange == NULL || len != 8) {
-		printk(KERN_DEBUG "Can't get bus-range for PCI-PCI bridge %s\n",
-		       node->full_name);
-		return;
-	}
-	ranges = of_get_property(node, "ranges", &len);
-	if (ranges == NULL) {
-		printk(KERN_DEBUG "Can't get ranges for PCI-PCI bridge %s\n",
-		       node->full_name);
-		return;
-	}
-
-	bus = pci_add_new_bus(dev->bus, dev, busrange[0]);
-	if (!bus) {
-		printk(KERN_ERR "Failed to create pci bus for %s\n",
-		       node->full_name);
-		return;
-	}
-
-	bus->primary = dev->bus->number;
-	bus->subordinate = busrange[1];
-	bus->bridge_ctl = 0;
-	bus->sysdata = node;
-
-	/* parse ranges property */
-	/* PCI #address-cells == 3 and #size-cells == 2 always */
-	res = &dev->resource[PCI_BRIDGE_RESOURCES];
-	for (i = 0; i < PCI_NUM_RESOURCES - PCI_BRIDGE_RESOURCES; ++i) {
-		res->flags = 0;
-		bus->resource[i] = res;
-		++res;
-	}
-	i = 1;
-	for (; len >= 32; len -= 32, ranges += 8) {
-		flags = pci_parse_of_flags(ranges[0], 1);
-		size = of_read_number(&ranges[6], 2);
-		if (flags == 0 || size == 0)
-			continue;
-		if (flags & IORESOURCE_IO) {
-			res = bus->resource[0];
-			if (res->flags) {
-				printk(KERN_ERR "PCI: ignoring extra I/O range"
-				       " for bridge %s\n", node->full_name);
-				continue;
-			}
-		} else {
-			if (i >= PCI_NUM_RESOURCES - PCI_BRIDGE_RESOURCES) {
-				printk(KERN_ERR "PCI: too many memory ranges"
-				       " for bridge %s\n", node->full_name);
-				continue;
-			}
-			res = bus->resource[i];
-			++i;
-		}
-		res->start = of_read_number(&ranges[1], 2);
-		res->end = res->start + size - 1;
-		res->flags = flags;
-	}
-	sprintf(bus->name, "PCI Bus %04x:%02x", pci_domain_nr(bus),
-		bus->number);
-	pr_debug("    bus name: %s\n", bus->name);
-
-	mode = PCI_PROBE_NORMAL;
-	if (ppc_md.pci_probe_mode)
-		mode = ppc_md.pci_probe_mode(bus);
-	pr_debug("    probe mode: %d\n", mode);
-
-	if (mode == PCI_PROBE_DEVTREE)
-		of_scan_bus(node, bus);
-	else if (mode == PCI_PROBE_NORMAL)
-		pci_scan_child_bus(bus);
-}
-EXPORT_SYMBOL(of_scan_pci_bridge);
-
 void __devinit scan_phb(struct pci_controller *hose)
 {
 	struct pci_bus *bus;
diff --git a/arch/powerpc/kernel/pci_of_scan.c b/arch/powerpc/kernel/pci_of_scan.c
new file mode 100644
index 00000000000..72c31bcb7aa
--- /dev/null
+++ b/arch/powerpc/kernel/pci_of_scan.c
@@ -0,0 +1,358 @@
+/*
+ * Helper routines to scan the device tree for PCI devices and busses
+ *
+ * Migrated out of PowerPC architecture pci_64.c file by Grant Likely
+ * <grant.likely@secretlab.ca> so that these routines are available for
+ * 32 bit also.
+ *
+ * Copyright (C) 2003 Anton Blanchard <anton@au.ibm.com>, IBM
+ *   Rework, based on alpha PCI code.
+ * Copyright (c) 2009 Secret Lab Technologies Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ */
+
+#include <linux/pci.h>
+#include <asm/pci-bridge.h>
+#include <asm/prom.h>
+
+/**
+ * get_int_prop - Decode a u32 from a device tree property
+ */
+static u32 get_int_prop(struct device_node *np, const char *name, u32 def)
+{
+	const u32 *prop;
+	int len;
+
+	prop = of_get_property(np, name, &len);
+	if (prop && len >= 4)
+		return *prop;
+	return def;
+}
+
+/**
+ * pci_parse_of_flags - Parse the flags cell of a device tree PCI address
+ * @addr0: value of 1st cell of a device tree PCI address.
+ * @bridge: Set this flag if the address is from a bridge 'ranges' property
+ */
+unsigned int pci_parse_of_flags(u32 addr0, int bridge)
+{
+	unsigned int flags = 0;
+
+	if (addr0 & 0x02000000) {
+		flags = IORESOURCE_MEM | PCI_BASE_ADDRESS_SPACE_MEMORY;
+		flags |= (addr0 >> 22) & PCI_BASE_ADDRESS_MEM_TYPE_64;
+		flags |= (addr0 >> 28) & PCI_BASE_ADDRESS_MEM_TYPE_1M;
+		if (addr0 & 0x40000000)
+			flags |= IORESOURCE_PREFETCH
+				 | PCI_BASE_ADDRESS_MEM_PREFETCH;
+		/* Note: We don't know whether the ROM has been left enabled
+		 * by the firmware or not. We mark it as disabled (ie, we do
+		 * not set the IORESOURCE_ROM_ENABLE flag) for now rather than
+		 * do a config space read, it will be force-enabled if needed
+		 */
+		if (!bridge && (addr0 & 0xff) == 0x30)
+			flags |= IORESOURCE_READONLY;
+	} else if (addr0 & 0x01000000)
+		flags = IORESOURCE_IO | PCI_BASE_ADDRESS_SPACE_IO;
+	if (flags)
+		flags |= IORESOURCE_SIZEALIGN;
+	return flags;
+}
+
+/**
+ * of_pci_parse_addrs - Parse PCI addresses assigned in the device tree node
+ * @node: device tree node for the PCI device
+ * @dev: pci_dev structure for the device
+ *
+ * This function parses the 'assigned-addresses' property of a PCI devices'
+ * device tree node and writes them into the associated pci_dev structure.
+ */
+static void of_pci_parse_addrs(struct device_node *node, struct pci_dev *dev)
+{
+	u64 base, size;
+	unsigned int flags;
+	struct resource *res;
+	const u32 *addrs;
+	u32 i;
+	int proplen;
+
+	addrs = of_get_property(node, "assigned-addresses", &proplen);
+	if (!addrs)
+		return;
+	pr_debug("    parse addresses (%d bytes) @ %p\n", proplen, addrs);
+	for (; proplen >= 20; proplen -= 20, addrs += 5) {
+		flags = pci_parse_of_flags(addrs[0], 0);
+		if (!flags)
+			continue;
+		base = of_read_number(&addrs[1], 2);
+		size = of_read_number(&addrs[3], 2);
+		if (!size)
+			continue;
+		i = addrs[0] & 0xff;
+		pr_debug("  base: %llx, size: %llx, i: %x\n",
+			 (unsigned long long)base,
+			 (unsigned long long)size, i);
+
+		if (PCI_BASE_ADDRESS_0 <= i && i <= PCI_BASE_ADDRESS_5) {
+			res = &dev->resource[(i - PCI_BASE_ADDRESS_0) >> 2];
+		} else if (i == dev->rom_base_reg) {
+			res = &dev->resource[PCI_ROM_RESOURCE];
+			flags |= IORESOURCE_READONLY | IORESOURCE_CACHEABLE;
+		} else {
+			printk(KERN_ERR "PCI: bad cfg reg num 0x%x\n", i);
+			continue;
+		}
+		res->start = base;
+		res->end = base + size - 1;
+		res->flags = flags;
+		res->name = pci_name(dev);
+	}
+}
+
+/**
+ * of_create_pci_dev - Given a device tree node on a pci bus, create a pci_dev
+ * @node: device tree node pointer
+ * @bus: bus the device is sitting on
+ * @devfn: PCI function number, extracted from device tree by caller.
+ */
+struct pci_dev *of_create_pci_dev(struct device_node *node,
+				 struct pci_bus *bus, int devfn)
+{
+	struct pci_dev *dev;
+	const char *type;
+
+	dev = alloc_pci_dev();
+	if (!dev)
+		return NULL;
+	type = of_get_property(node, "device_type", NULL);
+	if (type == NULL)
+		type = "";
+
+	pr_debug("    create device, devfn: %x, type: %s\n", devfn, type);
+
+	dev->bus = bus;
+	dev->sysdata = node;
+	dev->dev.parent = bus->bridge;
+	dev->dev.bus = &pci_bus_type;
+	dev->devfn = devfn;
+	dev->multifunction = 0;		/* maybe a lie? */
+
+	dev->vendor = get_int_prop(node, "vendor-id", 0xffff);
+	dev->device = get_int_prop(node, "device-id", 0xffff);
+	dev->subsystem_vendor = get_int_prop(node, "subsystem-vendor-id", 0);
+	dev->subsystem_device = get_int_prop(node, "subsystem-id", 0);
+
+	dev->cfg_size = pci_cfg_space_size(dev);
+
+	dev_set_name(&dev->dev, "%04x:%02x:%02x.%d", pci_domain_nr(bus),
+		dev->bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn));
+	dev->class = get_int_prop(node, "class-code", 0);
+	dev->revision = get_int_prop(node, "revision-id", 0);
+
+	pr_debug("    class: 0x%x\n", dev->class);
+	pr_debug("    revision: 0x%x\n", dev->revision);
+
+	dev->current_state = 4;		/* unknown power state */
+	dev->error_state = pci_channel_io_normal;
+	dev->dma_mask = 0xffffffff;
+
+	if (!strcmp(type, "pci") || !strcmp(type, "pciex")) {
+		/* a PCI-PCI bridge */
+		dev->hdr_type = PCI_HEADER_TYPE_BRIDGE;
+		dev->rom_base_reg = PCI_ROM_ADDRESS1;
+	} else if (!strcmp(type, "cardbus")) {
+		dev->hdr_type = PCI_HEADER_TYPE_CARDBUS;
+	} else {
+		dev->hdr_type = PCI_HEADER_TYPE_NORMAL;
+		dev->rom_base_reg = PCI_ROM_ADDRESS;
+		/* Maybe do a default OF mapping here */
+		dev->irq = NO_IRQ;
+	}
+
+	of_pci_parse_addrs(node, dev);
+
+	pr_debug("    adding to system ...\n");
+
+	pci_device_add(dev, bus);
+
+	return dev;
+}
+EXPORT_SYMBOL(of_create_pci_dev);
+
+/**
+ * of_scan_pci_bridge - Set up a PCI bridge and scan for child nodes
+ * @node: device tree node of bridge
+ * @dev: pci_dev structure for the bridge
+ *
+ * of_scan_bus() calls this routine for each PCI bridge that it finds, and
+ * this routine in turn call of_scan_bus() recusively to scan for more child
+ * devices.
+ */
+void __devinit of_scan_pci_bridge(struct device_node *node,
+				  struct pci_dev *dev)
+{
+	struct pci_bus *bus;
+	const u32 *busrange, *ranges;
+	int len, i, mode;
+	struct resource *res;
+	unsigned int flags;
+	u64 size;
+
+	pr_debug("of_scan_pci_bridge(%s)\n", node->full_name);
+
+	/* parse bus-range property */
+	busrange = of_get_property(node, "bus-range", &len);
+	if (busrange == NULL || len != 8) {
+		printk(KERN_DEBUG "Can't get bus-range for PCI-PCI bridge %s\n",
+		       node->full_name);
+		return;
+	}
+	ranges = of_get_property(node, "ranges", &len);
+	if (ranges == NULL) {
+		printk(KERN_DEBUG "Can't get ranges for PCI-PCI bridge %s\n",
+		       node->full_name);
+		return;
+	}
+
+	bus = pci_add_new_bus(dev->bus, dev, busrange[0]);
+	if (!bus) {
+		printk(KERN_ERR "Failed to create pci bus for %s\n",
+		       node->full_name);
+		return;
+	}
+
+	bus->primary = dev->bus->number;
+	bus->subordinate = busrange[1];
+	bus->bridge_ctl = 0;
+	bus->sysdata = node;
+
+	/* parse ranges property */
+	/* PCI #address-cells == 3 and #size-cells == 2 always */
+	res = &dev->resource[PCI_BRIDGE_RESOURCES];
+	for (i = 0; i < PCI_NUM_RESOURCES - PCI_BRIDGE_RESOURCES; ++i) {
+		res->flags = 0;
+		bus->resource[i] = res;
+		++res;
+	}
+	i = 1;
+	for (; len >= 32; len -= 32, ranges += 8) {
+		flags = pci_parse_of_flags(ranges[0], 1);
+		size = of_read_number(&ranges[6], 2);
+		if (flags == 0 || size == 0)
+			continue;
+		if (flags & IORESOURCE_IO) {
+			res = bus->resource[0];
+			if (res->flags) {
+				printk(KERN_ERR "PCI: ignoring extra I/O range"
+				       " for bridge %s\n", node->full_name);
+				continue;
+			}
+		} else {
+			if (i >= PCI_NUM_RESOURCES - PCI_BRIDGE_RESOURCES) {
+				printk(KERN_ERR "PCI: too many memory ranges"
+				       " for bridge %s\n", node->full_name);
+				continue;
+			}
+			res = bus->resource[i];
+			++i;
+		}
+		res->start = of_read_number(&ranges[1], 2);
+		res->end = res->start + size - 1;
+		res->flags = flags;
+	}
+	sprintf(bus->name, "PCI Bus %04x:%02x", pci_domain_nr(bus),
+		bus->number);
+	pr_debug("    bus name: %s\n", bus->name);
+
+	mode = PCI_PROBE_NORMAL;
+	if (ppc_md.pci_probe_mode)
+		mode = ppc_md.pci_probe_mode(bus);
+	pr_debug("    probe mode: %d\n", mode);
+
+	if (mode == PCI_PROBE_DEVTREE)
+		of_scan_bus(node, bus);
+	else if (mode == PCI_PROBE_NORMAL)
+		pci_scan_child_bus(bus);
+}
+EXPORT_SYMBOL(of_scan_pci_bridge);
+
+/**
+ * __of_scan_bus - given a PCI bus node, setup bus and scan for child devices
+ * @node: device tree node for the PCI bus
+ * @bus: pci_bus structure for the PCI bus
+ * @rescan_existing: Flag indicating bus has already been set up
+ */
+static void __devinit __of_scan_bus(struct device_node *node,
+				    struct pci_bus *bus, int rescan_existing)
+{
+	struct device_node *child;
+	const u32 *reg;
+	int reglen, devfn;
+	struct pci_dev *dev;
+
+	pr_debug("of_scan_bus(%s) bus no %d... \n",
+		 node->full_name, bus->number);
+
+	/* Scan direct children */
+	for_each_child_of_node(node, child) {
+		pr_debug("  * %s\n", child->full_name);
+		reg = of_get_property(child, "reg", &reglen);
+		if (reg == NULL || reglen < 20)
+			continue;
+		devfn = (reg[0] >> 8) & 0xff;
+
+		/* create a new pci_dev for this device */
+		dev = of_create_pci_dev(child, bus, devfn);
+		if (!dev)
+			continue;
+		pr_debug("    dev header type: %x\n", dev->hdr_type);
+	}
+
+	/* Apply all fixups necessary. We don't fixup the bus "self"
+	 * for an existing bridge that is being rescanned
+	 */
+	if (!rescan_existing)
+		pcibios_setup_bus_self(bus);
+	pcibios_setup_bus_devices(bus);
+
+	/* Now scan child busses */
+	list_for_each_entry(dev, &bus->devices, bus_list) {
+		if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE ||
+		    dev->hdr_type == PCI_HEADER_TYPE_CARDBUS) {
+			struct device_node *child = pci_device_to_OF_node(dev);
+			if (dev)
+				of_scan_pci_bridge(child, dev);
+		}
+	}
+}
+
+/**
+ * of_scan_bus - given a PCI bus node, setup bus and scan for child devices
+ * @node: device tree node for the PCI bus
+ * @bus: pci_bus structure for the PCI bus
+ */
+void __devinit of_scan_bus(struct device_node *node,
+			   struct pci_bus *bus)
+{
+	__of_scan_bus(node, bus, 0);
+}
+EXPORT_SYMBOL_GPL(of_scan_bus);
+
+/**
+ * of_rescan_bus - given a PCI bus node, scan for child devices
+ * @node: device tree node for the PCI bus
+ * @bus: pci_bus structure for the PCI bus
+ *
+ * Same as of_scan_bus, but for a pci_bus structure that has already been
+ * setup.
+ */
+void __devinit of_rescan_bus(struct device_node *node,
+			     struct pci_bus *bus)
+{
+	__of_scan_bus(node, bus, 1);
+}
+EXPORT_SYMBOL_GPL(of_rescan_bus);
+
-- 
cgit v1.2.3


From 89c2dd62a389c5fed07c4b13c906c43214fc7491 Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@kernel.crashing.org>
Date: Tue, 25 Aug 2009 16:20:45 +0000
Subject: powerpc/pci: Pull ppc32 PCI features into common

Some of the PCI features we have in ppc32 we will need on ppc64
platforms in the future.  These include support for:

* ppc_md.pci_exclude_device
* indirect config cycles
* early config cycles

We also simplified the logic in fake_pci_bus() to assume it will always
get a valid pci_controller.  Since all current callers seem to pass it
one.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/machdep.h    |  6 +--
 arch/powerpc/include/asm/pci-bridge.h | 35 ++++++++---------
 arch/powerpc/kernel/pci-common.c      | 71 +++++++++++++++++++++++++++++++++++
 arch/powerpc/kernel/pci_32.c          | 71 -----------------------------------
 4 files changed, 90 insertions(+), 93 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/machdep.h b/arch/powerpc/include/asm/machdep.h
index 11d1fc3a896..9efa2be7833 100644
--- a/arch/powerpc/include/asm/machdep.h
+++ b/arch/powerpc/include/asm/machdep.h
@@ -209,14 +209,14 @@ struct machdep_calls {
 	/*
 	 * optional PCI "hooks"
 	 */
-	/* Called in indirect_* to avoid touching devices */
-	int (*pci_exclude_device)(struct pci_controller *, unsigned char, unsigned char);
-
 	/* Called at then very end of pcibios_init() */
 	void (*pcibios_after_init)(void);
 
 #endif /* CONFIG_PPC32 */
 
+	/* Called in indirect_* to avoid touching devices */
+	int (*pci_exclude_device)(struct pci_controller *, unsigned char, unsigned char);
+
 	/* Called after PPC generic resource fixup to perform
 	   machine specific fixups */
 	void (*pcibios_fixup_resources)(struct pci_dev *);
diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h
index 3faf575f6b0..76e1f313a58 100644
--- a/arch/powerpc/include/asm/pci-bridge.h
+++ b/arch/powerpc/include/asm/pci-bridge.h
@@ -77,9 +77,7 @@ struct pci_controller {
 
 	int first_busno;
 	int last_busno;
-#ifndef CONFIG_PPC64
 	int self_busno;
-#endif
 
 	void __iomem *io_base_virt;
 #ifdef CONFIG_PPC64
@@ -104,7 +102,6 @@ struct pci_controller {
 	unsigned int __iomem *cfg_addr;
 	void __iomem *cfg_data;
 
-#ifndef CONFIG_PPC64
 	/*
 	 * Used for variants of PCI indirect handling and possible quirks:
 	 *  SET_CFG_TYPE - used on 4xx or any PHB that does explicit type0/1
@@ -128,7 +125,6 @@ struct pci_controller {
 #define PPC_INDIRECT_TYPE_BIG_ENDIAN		0x00000010
 #define PPC_INDIRECT_TYPE_BROKEN_MRM		0x00000020
 	u32 indirect_type;
-#endif	/* !CONFIG_PPC64 */
 	/* Currently, we limit ourselves to 1 IO range and 3 mem
 	 * ranges since the common pci_bus structure can't handle more
 	 */
@@ -146,21 +142,6 @@ struct pci_controller {
 #endif	/* CONFIG_PPC64 */
 };
 
-#ifndef CONFIG_PPC64
-
-static inline struct pci_controller *pci_bus_to_host(const struct pci_bus *bus)
-{
-	return bus->sysdata;
-}
-
-static inline int isa_vaddr_is_ioport(void __iomem *address)
-{
-	/* No specific ISA handling on ppc32 at this stage, it
-	 * all goes through PCI
-	 */
-	return 0;
-}
-
 /* These are used for config access before all the PCI probing
    has been done. */
 extern int early_read_config_byte(struct pci_controller *hose, int bus,
@@ -182,6 +163,22 @@ extern int early_find_capability(struct pci_controller *hose, int bus,
 extern void setup_indirect_pci(struct pci_controller* hose,
 			       resource_size_t cfg_addr,
 			       resource_size_t cfg_data, u32 flags);
+
+#ifndef CONFIG_PPC64
+
+static inline struct pci_controller *pci_bus_to_host(const struct pci_bus *bus)
+{
+	return bus->sysdata;
+}
+
+static inline int isa_vaddr_is_ioport(void __iomem *address)
+{
+	/* No specific ISA handling on ppc32 at this stage, it
+	 * all goes through PCI
+	 */
+	return 0;
+}
+
 #else	/* CONFIG_PPC64 */
 
 /*
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index 725ea9144e3..8f84a9a8428 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -1617,3 +1617,74 @@ void __devinit pcibios_setup_phb_resources(struct pci_controller *hose)
 		 (unsigned long)hose->io_base_virt - _IO_BASE);
 
 }
+
+/*
+ * Null PCI config access functions, for the case when we can't
+ * find a hose.
+ */
+#define NULL_PCI_OP(rw, size, type)					\
+static int								\
+null_##rw##_config_##size(struct pci_dev *dev, int offset, type val)	\
+{									\
+	return PCIBIOS_DEVICE_NOT_FOUND;    				\
+}
+
+static int
+null_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
+		 int len, u32 *val)
+{
+	return PCIBIOS_DEVICE_NOT_FOUND;
+}
+
+static int
+null_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
+		  int len, u32 val)
+{
+	return PCIBIOS_DEVICE_NOT_FOUND;
+}
+
+static struct pci_ops null_pci_ops =
+{
+	.read = null_read_config,
+	.write = null_write_config,
+};
+
+/*
+ * These functions are used early on before PCI scanning is done
+ * and all of the pci_dev and pci_bus structures have been created.
+ */
+static struct pci_bus *
+fake_pci_bus(struct pci_controller *hose, int busnr)
+{
+	static struct pci_bus bus;
+
+	if (hose == 0) {
+		printk(KERN_ERR "Can't find hose for PCI bus %d!\n", busnr);
+	}
+	bus.number = busnr;
+	bus.sysdata = hose;
+	bus.ops = hose? hose->ops: &null_pci_ops;
+	return &bus;
+}
+
+#define EARLY_PCI_OP(rw, size, type)					\
+int early_##rw##_config_##size(struct pci_controller *hose, int bus,	\
+			       int devfn, int offset, type value)	\
+{									\
+	return pci_bus_##rw##_config_##size(fake_pci_bus(hose, bus),	\
+					    devfn, offset, value);	\
+}
+
+EARLY_PCI_OP(read, byte, u8 *)
+EARLY_PCI_OP(read, word, u16 *)
+EARLY_PCI_OP(read, dword, u32 *)
+EARLY_PCI_OP(write, byte, u8)
+EARLY_PCI_OP(write, word, u16)
+EARLY_PCI_OP(write, dword, u32)
+
+extern int pci_bus_find_capability (struct pci_bus *bus, unsigned int devfn, int cap);
+int early_find_capability(struct pci_controller *hose, int bus, int devfn,
+			  int cap)
+{
+	return pci_bus_find_capability(fake_pci_bus(hose, bus), devfn, cap);
+}
diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c
index 1e807fe7ad2..8cf15d961c3 100644
--- a/arch/powerpc/kernel/pci_32.c
+++ b/arch/powerpc/kernel/pci_32.c
@@ -469,75 +469,4 @@ long sys_pciconfig_iobase(long which, unsigned long bus, unsigned long devfn)
 	return result;
 }
 
-/*
- * Null PCI config access functions, for the case when we can't
- * find a hose.
- */
-#define NULL_PCI_OP(rw, size, type)					\
-static int								\
-null_##rw##_config_##size(struct pci_dev *dev, int offset, type val)	\
-{									\
-	return PCIBIOS_DEVICE_NOT_FOUND;    				\
-}
-
-static int
-null_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
-		 int len, u32 *val)
-{
-	return PCIBIOS_DEVICE_NOT_FOUND;
-}
-
-static int
-null_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
-		  int len, u32 val)
-{
-	return PCIBIOS_DEVICE_NOT_FOUND;
-}
-
-static struct pci_ops null_pci_ops =
-{
-	.read = null_read_config,
-	.write = null_write_config,
-};
 
-/*
- * These functions are used early on before PCI scanning is done
- * and all of the pci_dev and pci_bus structures have been created.
- */
-static struct pci_bus *
-fake_pci_bus(struct pci_controller *hose, int busnr)
-{
-	static struct pci_bus bus;
-
-	if (hose == 0) {
-		hose = pci_bus_to_hose(busnr);
-		if (hose == 0)
-			printk(KERN_ERR "Can't find hose for PCI bus %d!\n", busnr);
-	}
-	bus.number = busnr;
-	bus.sysdata = hose;
-	bus.ops = hose? hose->ops: &null_pci_ops;
-	return &bus;
-}
-
-#define EARLY_PCI_OP(rw, size, type)					\
-int early_##rw##_config_##size(struct pci_controller *hose, int bus,	\
-			       int devfn, int offset, type value)	\
-{									\
-	return pci_bus_##rw##_config_##size(fake_pci_bus(hose, bus),	\
-					    devfn, offset, value);	\
-}
-
-EARLY_PCI_OP(read, byte, u8 *)
-EARLY_PCI_OP(read, word, u16 *)
-EARLY_PCI_OP(read, dword, u32 *)
-EARLY_PCI_OP(write, byte, u8)
-EARLY_PCI_OP(write, word, u16)
-EARLY_PCI_OP(write, dword, u32)
-
-extern int pci_bus_find_capability (struct pci_bus *bus, unsigned int devfn, int cap);
-int early_find_capability(struct pci_controller *hose, int bus, int devfn,
-			  int cap)
-{
-	return pci_bus_find_capability(fake_pci_bus(hose, bus), devfn, cap);
-}
-- 
cgit v1.2.3


From e5a6a1c9094839581242c678b11c93c294108696 Mon Sep 17 00:00:00 2001
From: Paul Gortmaker <paul.gortmaker@windriver.com>
Date: Thu, 13 Aug 2009 09:37:04 +0000
Subject: powerpc: derive COMMAND_LINE_SIZE from asm-generic

The default COMMAND_LINE_SIZE in asm-generic is 512, so the
net effect of this change is nil, aside from the cleanup
factor.  See also commit 2b74b8569.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/setup.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/setup.h b/arch/powerpc/include/asm/setup.h
index 817fac0a071..dae19342f0b 100644
--- a/arch/powerpc/include/asm/setup.h
+++ b/arch/powerpc/include/asm/setup.h
@@ -1,6 +1,6 @@
 #ifndef _ASM_POWERPC_SETUP_H
 #define _ASM_POWERPC_SETUP_H
 
-#define COMMAND_LINE_SIZE	512
+#include <asm-generic/setup.h>
 
 #endif	/* _ASM_POWERPC_SETUP_H */
-- 
cgit v1.2.3


From 77c0a700c1c292edafa11c1e52821ce4636f81b0 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Fri, 28 Aug 2009 14:25:04 +1000
Subject: powerpc: Properly start decrementer on BookE secondary CPUs

This moves the code to start the decrementer on 40x and BookE into
a separate function which is now called from time_init() and
secondary_time_init(), before the respective clock sources are
registered. We also remove the 85xx specific code for doing it
from the platform code.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/time.c        | 30 ++++++++++++++++++++++--------
 arch/powerpc/platforms/85xx/smp.c | 12 ------------
 2 files changed, 22 insertions(+), 20 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index edb1edb3646..a180b4f9a4f 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -727,6 +727,18 @@ static int __init get_freq(char *name, int cells, unsigned long *val)
 	return found;
 }
 
+/* should become __cpuinit when secondary_cpu_time_init also is */
+void start_cpu_decrementer(void)
+{
+#if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
+	/* Clear any pending timer interrupts */
+	mtspr(SPRN_TSR, TSR_ENW | TSR_WIS | TSR_DIS | TSR_FIS);
+
+	/* Enable decrementer interrupt */
+	mtspr(SPRN_TCR, TCR_DIE);
+#endif /* defined(CONFIG_BOOKE) || defined(CONFIG_40x) */
+}
+
 void __init generic_calibrate_decr(void)
 {
 	ppc_tb_freq = DEFAULT_TB_FREQ;		/* hardcoded default */
@@ -746,14 +758,6 @@ void __init generic_calibrate_decr(void)
 		printk(KERN_ERR "WARNING: Estimating processor frequency "
 				"(not found)\n");
 	}
-
-#if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
-	/* Clear any pending timer interrupts */
-	mtspr(SPRN_TSR, TSR_ENW | TSR_WIS | TSR_DIS | TSR_FIS);
-
-	/* Enable decrementer interrupt */
-	mtspr(SPRN_TCR, TCR_DIE);
-#endif
 }
 
 int update_persistent_clock(struct timespec now)
@@ -914,6 +918,11 @@ static void __init init_decrementer_clockevent(void)
 
 void secondary_cpu_time_init(void)
 {
+	/* Start the decrementer on CPUs that have manual control
+	 * such as BookE
+	 */
+	start_cpu_decrementer();
+
 	/* FIME: Should make unrelatred change to move snapshot_timebase
 	 * call here ! */
 	register_decrementer_clockevent(smp_processor_id());
@@ -1017,6 +1026,11 @@ void __init time_init(void)
 
 	write_sequnlock_irqrestore(&xtime_lock, flags);
 
+	/* Start the decrementer on CPUs that have manual control
+	 * such as BookE
+	 */
+	start_cpu_decrementer();
+
 	/* Register the clocksource, if we're not running on iSeries */
 	if (!firmware_has_feature(FW_FEATURE_ISERIES))
 		clocksource_init();
diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c
index 9f526ba31c1..94f901da491 100644
--- a/arch/powerpc/platforms/85xx/smp.c
+++ b/arch/powerpc/platforms/85xx/smp.c
@@ -78,22 +78,10 @@ smp_85xx_kick_cpu(int nr)
 	pr_debug("waited %d msecs for CPU #%d.\n", n, nr);
 }
 
-static void __init
-smp_85xx_basic_setup(int cpu_nr)
-{
-	/* Clear any pending timer interrupts */
-	mtspr(SPRN_TSR, TSR_ENW | TSR_WIS | TSR_DIS | TSR_FIS);
-
-	/* Enable decrementer interrupt */
-	mtspr(SPRN_TCR, TCR_DIE);
-}
-
 static void __init
 smp_85xx_setup_cpu(int cpu_nr)
 {
 	mpic_setup_this_cpu();
-
-	smp_85xx_basic_setup(cpu_nr);
 }
 
 struct smp_ops_t smp_85xx_ops = {
-- 
cgit v1.2.3


From 2a4ab640d3c28c2952967e5f63ea495555bf2a5f Mon Sep 17 00:00:00 2001
From: Feng Tang <feng.tang@intel.com>
Date: Tue, 7 Jul 2009 23:01:15 -0400
Subject: ACPI, x86: expose some IO-APIC routines when CONFIG_ACPI=n

Some IO-APIC routines are ACPI specific now, but need to
be exposed when CONFIG_ACPI=n for the benefit of SFI.

Remove #ifdef ACPI around these routines:

io_apic_get_unique_id(int ioapic, int apic_id);
io_apic_get_version(int ioapic);
io_apic_get_redir_entries(int ioapic);

Move these routines from ACPI-specific boot.c to io_apic.c:

uniq_ioapic_id(u8 id)
mp_find_ioapic()
mp_find_ioapic_pin()
mp_register_ioapic()

Also, since uniq_ioapic_id() is now no longer static,
re-name it to io_apic_unique_id() for consistency
with the other public io_apic routines.

For simplicity, do not #ifdef the resulting code ACPI || SFI,
thought that could be done in the future if it is important
to optimize the !ACPI !SFI IO-APIC x86 kernel for size.

Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Cc: x86@kernel.org
---
 arch/x86/include/asm/io_apic.h |  13 +++++-
 arch/x86/kernel/acpi/boot.c    | 102 +---------------------------------------
 arch/x86/kernel/apic/io_apic.c | 103 ++++++++++++++++++++++++++++++++++++++---
 3 files changed, 109 insertions(+), 109 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h
index 330ee807f89..85232d32fcb 100644
--- a/arch/x86/include/asm/io_apic.h
+++ b/arch/x86/include/asm/io_apic.h
@@ -150,11 +150,10 @@ extern int timer_through_8259;
 #define io_apic_assign_pci_irqs \
 	(mp_irq_entries && !skip_ioapic_setup && io_apic_irqs)
 
-#ifdef CONFIG_ACPI
+extern u8 io_apic_unique_id(u8 id);
 extern int io_apic_get_unique_id(int ioapic, int apic_id);
 extern int io_apic_get_version(int ioapic);
 extern int io_apic_get_redir_entries(int ioapic);
-#endif /* CONFIG_ACPI */
 
 struct io_apic_irq_attr;
 extern int io_apic_set_pci_routing(struct device *dev, int irq,
@@ -177,6 +176,16 @@ extern int setup_ioapic_entry(int apic, int irq,
 			      int polarity, int vector, int pin);
 extern void ioapic_write_entry(int apic, int pin,
 			       struct IO_APIC_route_entry e);
+
+struct mp_ioapic_gsi{
+	int gsi_base;
+	int gsi_end;
+};
+extern struct mp_ioapic_gsi  mp_gsi_routing[];
+int mp_find_ioapic(int gsi);
+int mp_find_ioapic_pin(int ioapic, int gsi);
+void __init mp_register_ioapic(int id, u32 address, u32 gsi_base);
+
 #else  /* !CONFIG_X86_IO_APIC */
 #define io_apic_assign_pci_irqs 0
 static const int timer_through_8259 = 0;
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 6b8ca3a0285..7e62d1eb8e3 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -833,106 +833,6 @@ static int __init acpi_parse_madt_lapic_entries(void)
 extern int es7000_plat;
 #endif
 
-static struct {
-	int gsi_base;
-	int gsi_end;
-} mp_ioapic_routing[MAX_IO_APICS];
-
-int mp_find_ioapic(int gsi)
-{
-	int i = 0;
-
-	/* Find the IOAPIC that manages this GSI. */
-	for (i = 0; i < nr_ioapics; i++) {
-		if ((gsi >= mp_ioapic_routing[i].gsi_base)
-		    && (gsi <= mp_ioapic_routing[i].gsi_end))
-			return i;
-	}
-
-	printk(KERN_ERR "ERROR: Unable to locate IOAPIC for GSI %d\n", gsi);
-	return -1;
-}
-
-int mp_find_ioapic_pin(int ioapic, int gsi)
-{
-	if (WARN_ON(ioapic == -1))
-		return -1;
-	if (WARN_ON(gsi > mp_ioapic_routing[ioapic].gsi_end))
-		return -1;
-
-	return gsi - mp_ioapic_routing[ioapic].gsi_base;
-}
-
-static u8 __init uniq_ioapic_id(u8 id)
-{
-#ifdef CONFIG_X86_32
-	if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) &&
-	    !APIC_XAPIC(apic_version[boot_cpu_physical_apicid]))
-		return io_apic_get_unique_id(nr_ioapics, id);
-	else
-		return id;
-#else
-	int i;
-	DECLARE_BITMAP(used, 256);
-	bitmap_zero(used, 256);
-	for (i = 0; i < nr_ioapics; i++) {
-		struct mpc_ioapic *ia = &mp_ioapics[i];
-		__set_bit(ia->apicid, used);
-	}
-	if (!test_bit(id, used))
-		return id;
-	return find_first_zero_bit(used, 256);
-#endif
-}
-
-static int bad_ioapic(unsigned long address)
-{
-	if (nr_ioapics >= MAX_IO_APICS) {
-		printk(KERN_ERR "ERROR: Max # of I/O APICs (%d) exceeded "
-		       "(found %d)\n", MAX_IO_APICS, nr_ioapics);
-		panic("Recompile kernel with bigger MAX_IO_APICS!\n");
-	}
-	if (!address) {
-		printk(KERN_ERR "WARNING: Bogus (zero) I/O APIC address"
-		       " found in table, skipping!\n");
-		return 1;
-	}
-	return 0;
-}
-
-void __init mp_register_ioapic(int id, u32 address, u32 gsi_base)
-{
-	int idx = 0;
-
-	if (bad_ioapic(address))
-		return;
-
-	idx = nr_ioapics;
-
-	mp_ioapics[idx].type = MP_IOAPIC;
-	mp_ioapics[idx].flags = MPC_APIC_USABLE;
-	mp_ioapics[idx].apicaddr = address;
-
-	set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address);
-	mp_ioapics[idx].apicid = uniq_ioapic_id(id);
-	mp_ioapics[idx].apicver = io_apic_get_version(idx);
-
-	/*
-	 * Build basic GSI lookup table to facilitate gsi->io_apic lookups
-	 * and to prevent reprogramming of IOAPIC pins (PCI GSIs).
-	 */
-	mp_ioapic_routing[idx].gsi_base = gsi_base;
-	mp_ioapic_routing[idx].gsi_end = gsi_base +
-	    io_apic_get_redir_entries(idx);
-
-	printk(KERN_INFO "IOAPIC[%d]: apic_id %d, version %d, address 0x%x, "
-	       "GSI %d-%d\n", idx, mp_ioapics[idx].apicid,
-	       mp_ioapics[idx].apicver, mp_ioapics[idx].apicaddr,
-	       mp_ioapic_routing[idx].gsi_base, mp_ioapic_routing[idx].gsi_end);
-
-	nr_ioapics++;
-}
-
 int __init acpi_probe_gsi(void)
 {
 	int idx;
@@ -947,7 +847,7 @@ int __init acpi_probe_gsi(void)
 
 	max_gsi = 0;
 	for (idx = 0; idx < nr_ioapics; idx++) {
-		gsi = mp_ioapic_routing[idx].gsi_end;
+		gsi = mp_gsi_routing[idx].gsi_end;
 
 		if (gsi > max_gsi)
 			max_gsi = gsi;
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index d2ed6c5ddc8..a8c0232b389 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -85,6 +85,9 @@ int nr_ioapic_registers[MAX_IO_APICS];
 struct mpc_ioapic mp_ioapics[MAX_IO_APICS];
 int nr_ioapics;
 
+/* IO APIC gsi routing info */
+struct mp_ioapic_gsi  mp_gsi_routing[MAX_IO_APICS];
+
 /* MP IRQ source entries */
 struct mpc_intsrc mp_irqs[MAX_IRQ_SOURCES];
 
@@ -3941,11 +3944,28 @@ int io_apic_set_pci_routing(struct device *dev, int irq,
 	return __io_apic_set_pci_routing(dev, irq, irq_attr);
 }
 
-/* --------------------------------------------------------------------------
-                          ACPI-based IOAPIC Configuration
-   -------------------------------------------------------------------------- */
+u8 __init io_apic_unique_id(u8 id)
+{
+#ifdef CONFIG_X86_32
+	if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) &&
+	    !APIC_XAPIC(apic_version[boot_cpu_physical_apicid]))
+		return io_apic_get_unique_id(nr_ioapics, id);
+	else
+		return id;
+#else
+	int i;
+	DECLARE_BITMAP(used, 256);
 
-#ifdef CONFIG_ACPI
+	bitmap_zero(used, 256);
+	for (i = 0; i < nr_ioapics; i++) {
+		struct mpc_ioapic *ia = &mp_ioapics[i];
+		__set_bit(ia->apicid, used);
+	}
+	if (!test_bit(id, used))
+		return id;
+	return find_first_zero_bit(used, 256);
+#endif
+}
 
 #ifdef CONFIG_X86_32
 int __init io_apic_get_unique_id(int ioapic, int apic_id)
@@ -4054,8 +4074,6 @@ int acpi_get_override_irq(int bus_irq, int *trigger, int *polarity)
 	return 0;
 }
 
-#endif /* CONFIG_ACPI */
-
 /*
  * This function currently is only a helper for the i386 smp boot process where
  * we need to reprogram the ioredtbls to cater for the cpus which have come online
@@ -4201,3 +4219,76 @@ void __init ioapic_insert_resources(void)
 		r++;
 	}
 }
+
+int mp_find_ioapic(int gsi)
+{
+	int i = 0;
+
+	/* Find the IOAPIC that manages this GSI. */
+	for (i = 0; i < nr_ioapics; i++) {
+		if ((gsi >= mp_gsi_routing[i].gsi_base)
+		    && (gsi <= mp_gsi_routing[i].gsi_end))
+			return i;
+	}
+
+	printk(KERN_ERR "ERROR: Unable to locate IOAPIC for GSI %d\n", gsi);
+	return -1;
+}
+
+int mp_find_ioapic_pin(int ioapic, int gsi)
+{
+	if (WARN_ON(ioapic == -1))
+		return -1;
+	if (WARN_ON(gsi > mp_gsi_routing[ioapic].gsi_end))
+		return -1;
+
+	return gsi - mp_gsi_routing[ioapic].gsi_base;
+}
+
+static int bad_ioapic(unsigned long address)
+{
+	if (nr_ioapics >= MAX_IO_APICS) {
+		printk(KERN_WARNING "WARING: Max # of I/O APICs (%d) exceeded "
+		       "(found %d), skipping\n", MAX_IO_APICS, nr_ioapics);
+		return 1;
+	}
+	if (!address) {
+		printk(KERN_WARNING "WARNING: Bogus (zero) I/O APIC address"
+		       " found in table, skipping!\n");
+		return 1;
+	}
+	return 0;
+}
+
+void __init mp_register_ioapic(int id, u32 address, u32 gsi_base)
+{
+	int idx = 0;
+
+	if (bad_ioapic(address))
+		return;
+
+	idx = nr_ioapics;
+
+	mp_ioapics[idx].type = MP_IOAPIC;
+	mp_ioapics[idx].flags = MPC_APIC_USABLE;
+	mp_ioapics[idx].apicaddr = address;
+
+	set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address);
+	mp_ioapics[idx].apicid = io_apic_unique_id(id);
+	mp_ioapics[idx].apicver = io_apic_get_version(idx);
+
+	/*
+	 * Build basic GSI lookup table to facilitate gsi->io_apic lookups
+	 * and to prevent reprogramming of IOAPIC pins (PCI GSIs).
+	 */
+	mp_gsi_routing[idx].gsi_base = gsi_base;
+	mp_gsi_routing[idx].gsi_end = gsi_base +
+	    io_apic_get_redir_entries(idx);
+
+	printk(KERN_INFO "IOAPIC[%d]: apic_id %d, version %d, address 0x%x, "
+	       "GSI %d-%d\n", idx, mp_ioapics[idx].apicid,
+	       mp_ioapics[idx].apicver, mp_ioapics[idx].apicaddr,
+	       mp_gsi_routing[idx].gsi_base, mp_gsi_routing[idx].gsi_end);
+
+	nr_ioapics++;
+}
-- 
cgit v1.2.3


From 4923576b8ac5bfd36ab2beb176aeb747aaab7e41 Mon Sep 17 00:00:00 2001
From: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Date: Thu, 27 Aug 2009 23:25:03 +0000
Subject: net: sh_eth: add value of ether_link pin in platform_data

The method of ETHER_LINK pin is board dependence.
This patch adding paramters are:
 - no_ether_link          : If set to 1, do not use ETHER_LINK
 - ether_link_active_low  : If set to 1, ETHER_LINK is active low.

Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sh/include/asm/sh_eth.h | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'arch')

diff --git a/arch/sh/include/asm/sh_eth.h b/arch/sh/include/asm/sh_eth.h
index bb832584f3c..acf99700dee 100644
--- a/arch/sh/include/asm/sh_eth.h
+++ b/arch/sh/include/asm/sh_eth.h
@@ -6,6 +6,9 @@ enum {EDMAC_LITTLE_ENDIAN, EDMAC_BIG_ENDIAN};
 struct sh_eth_plat_data {
 	int phy;
 	int edmac_endian;
+
+	unsigned no_ether_link:1;
+	unsigned ether_link_active_low:1;
 };
 
 #endif
-- 
cgit v1.2.3


From 47d25003cbd9e9030a95f7ccc4e70fec6aa7b844 Mon Sep 17 00:00:00 2001
From: Jan Beulich <JBeulich@novell.com>
Date: Fri, 28 Aug 2009 14:11:57 +0100
Subject: x86: Fix earlyprintk=dbgp for machines without NX

Since parse_early_param() may (e.g. for earlyprintk=dbgp)
involve calls to page table manipulation functions (here
set_fixmap_nocache()), NX hardware support must be determined
before calling that function (so that __supported_pte_mask gets
properly set up).

But the call after parse_early_param() can also not go away, as
that will honor eventual command line specified disabling of
the NX functionality.

( This will then just result in whatever mappings got
  established during parse_early_param() having the NX bit set
  despite it being disabled on the command line, but I think
  that's tolerable).

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
LKML-Reference: <4A97F3BD02000078000121B9@vpn.id2.novell.com>
[ merged to x86/pat to resolve a conflict. ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/setup.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 02643cc3bf2..eb1f1e6e52b 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -714,6 +714,16 @@ void __init setup_arch(char **cmdline_p)
 	strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
 	*cmdline_p = command_line;
 
+#ifdef CONFIG_X86_64
+	/*
+	 * Must call this twice: Once just to detect whether hardware doesn't
+	 * support NX (so that the early EHCI debug console setup can safely
+	 * call set_fixmap(), and then again after parsing early parameters to
+	 * honor the respective command line option.
+	 */
+	check_efer();
+#endif
+
 	parse_early_param();
 
 	/* VMI may relocate the fixmap; do this before touching ioremap area */
-- 
cgit v1.2.3


From 23386d63bbb3199cf247313ec088878d72debcfd Mon Sep 17 00:00:00 2001
From: Michal Schmidt <mschmidt@redhat.com>
Date: Sat, 29 Aug 2009 18:27:18 +0200
Subject: x86: Detect stack protector for i386 builds on x86_64

Stack protector support was not detected when building with
ARCH=i386 on x86_64 systems:

  arch/x86/Makefile:80: stack protector enabled but no compiler support

The "-m32" argument needs to be passed to the detection script.

Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Arjan van de Ven <arjan@infradead.org>
LKML-Reference: <20090829182718.10f566b1@leela>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
--
---
 arch/x86/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index 1b68659c41b..5e7db44d709 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -72,7 +72,7 @@ endif
 
 ifdef CONFIG_CC_STACKPROTECTOR
 	cc_has_sp := $(srctree)/scripts/gcc-x86_$(BITS)-has-stack-protector.sh
-        ifeq ($(shell $(CONFIG_SHELL) $(cc_has_sp) $(CC)),y)
+        ifeq ($(shell $(CONFIG_SHELL) $(cc_has_sp) $(CC) $(biarch)),y)
                 stackp-y := -fstack-protector
                 stackp-$(CONFIG_CC_STACKPROTECTOR_ALL) += -fstack-protector-all
                 KBUILD_CFLAGS += $(stackp-y)
-- 
cgit v1.2.3


From ed24157ede901608e00f28b4897398a373e1e926 Mon Sep 17 00:00:00 2001
From: Anton Vorontsov <avorontsov@ru.mvista.com>
Date: Thu, 27 Aug 2009 07:35:50 +0000
Subject: powerpc/qe: Implement qe_alive_during_sleep() helper function

In some CPUs (i.e. MPC8569) QE shuts down completely during sleep,
drivers may want to know that to reinitialize registers and buffer
descriptors.

This patch implements qe_alive_during_sleep() helper function, so far
it just checks if MPC8569-compatible power management controller is
present, which is a sign that QE turns off during sleep.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/powerpc/include/asm/qe.h   |  1 +
 arch/powerpc/sysdev/qe_lib/qe.c | 13 +++++++++++++
 2 files changed, 14 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/qe.h b/arch/powerpc/include/asm/qe.h
index 157c5ca581c..f388f0ab193 100644
--- a/arch/powerpc/include/asm/qe.h
+++ b/arch/powerpc/include/asm/qe.h
@@ -154,6 +154,7 @@ int qe_get_snum(void);
 void qe_put_snum(u8 snum);
 unsigned int qe_get_num_of_risc(void);
 unsigned int qe_get_num_of_snums(void);
+int qe_alive_during_sleep(void);
 
 /* we actually use cpm_muram implementation, define this for convenience */
 #define qe_muram_init cpm_muram_init
diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c
index 237e3654f48..464271bea6c 100644
--- a/arch/powerpc/sysdev/qe_lib/qe.c
+++ b/arch/powerpc/sysdev/qe_lib/qe.c
@@ -65,6 +65,19 @@ static unsigned int qe_num_of_snum;
 
 static phys_addr_t qebase = -1;
 
+int qe_alive_during_sleep(void)
+{
+	static int ret = -1;
+
+	if (ret != -1)
+		return ret;
+
+	ret = !of_find_compatible_node(NULL, NULL, "fsl,mpc8569-pmc");
+
+	return ret;
+}
+EXPORT_SYMBOL(qe_alive_during_sleep);
+
 phys_addr_t get_qe_base(void)
 {
 	struct device_node *qe;
-- 
cgit v1.2.3


From f661be6c8af3ae357e159c3ac6d6aea4aaf7581c Mon Sep 17 00:00:00 2001
From: Stefan Roese <sr@denx.de>
Date: Thu, 13 Aug 2009 04:30:44 +0000
Subject: powerpc/44x: Update Arches dts

This patch adds some nodes to the AMCC Arches dts:

- L2 cache support
- NOR FLASH mapping with default partitioning
- I2C HWMON device (AD7414)

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
---
 arch/powerpc/boot/dts/arches.dts | 50 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 50 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/boot/dts/arches.dts b/arch/powerpc/boot/dts/arches.dts
index d9113b1e8c1..414ef8b7e57 100644
--- a/arch/powerpc/boot/dts/arches.dts
+++ b/arch/powerpc/boot/dts/arches.dts
@@ -124,6 +124,16 @@
 		dcr-reg = <0x00c 0x002>;
 	};
 
+	L2C0: l2c {
+		compatible = "ibm,l2-cache-460gt", "ibm,l2-cache";
+		dcr-reg = <0x020 0x008		/* Internal SRAM DCR's */
+			   0x030 0x008>;	/* L2 cache DCR's */
+		cache-line-size = <32>;		/* 32 bytes */
+		cache-size = <262144>;		/* L2, 256K */
+		interrupt-parent = <&UIC1>;
+		interrupts = <11 1>;
+	};
+
 	plb {
 		compatible = "ibm,plb-460gt", "ibm,plb4";
 		#address-cells = <2>;
@@ -168,6 +178,38 @@
 				/* ranges property is supplied by U-Boot */
 				interrupts = <0x6 0x4>;
 				interrupt-parent = <&UIC1>;
+
+				nor_flash@0,0 {
+					compatible = "amd,s29gl256n", "cfi-flash";
+					bank-width = <2>;
+					reg = <0x00000000 0x00000000 0x02000000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					partition@0 {
+						label = "kernel";
+						reg = <0x00000000 0x001e0000>;
+					};
+					partition@1e0000 {
+						label = "dtb";
+						reg = <0x001e0000 0x00020000>;
+					};
+					partition@200000 {
+						label = "root";
+						reg = <0x00200000 0x00200000>;
+					};
+					partition@400000 {
+						label = "user";
+						reg = <0x00400000 0x01b60000>;
+					};
+					partition@1f60000 {
+						label = "env";
+						reg = <0x01f60000 0x00040000>;
+					};
+					partition@1fa0000 {
+						label = "u-boot";
+						reg = <0x01fa0000 0x00060000>;
+					};
+				};
 			};
 
 			UART0: serial@ef600300 {
@@ -186,6 +228,14 @@
 				reg = <0xef600700 0x00000014>;
 				interrupt-parent = <&UIC0>;
 				interrupts = <0x2 0x4>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				sttm@4a {
+					compatible = "ad,ad7414";
+					reg = <0x4a>;
+					interrupt-parent = <&UIC1>;
+					interrupts = <0x0 0x8>;
+				};
 			};
 
 			IIC1: i2c@ef600800 {
-- 
cgit v1.2.3


From 241749261377f2e10d513505a75c071c0f4b3b51 Mon Sep 17 00:00:00 2001
From: Stefan Roese <sr@denx.de>
Date: Thu, 13 Aug 2009 04:30:56 +0000
Subject: powerpc/44x: Update Arches defconfig

This patch adds NOR MTD support and I2C HWMON support for the AD7414
to the AMCC Arches defconfig.

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
---
 arch/powerpc/configs/44x/arches_defconfig | 382 ++++++++++++++++++++++++++----
 1 file changed, 332 insertions(+), 50 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/configs/44x/arches_defconfig b/arch/powerpc/configs/44x/arches_defconfig
index f7fd32c0942..6f976b51cdd 100644
--- a/arch/powerpc/configs/44x/arches_defconfig
+++ b/arch/powerpc/configs/44x/arches_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Tue Jan 20 08:22:31 2009
+# Linux kernel version: 2.6.31-rc5
+# Thu Aug 13 14:14:07 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -31,15 +31,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -53,11 +54,14 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
 CONFIG_PPC_DCR_NATIVE=y
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -71,9 +75,19 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
@@ -84,8 +98,12 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
@@ -95,23 +113,30 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -119,6 +144,12 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -130,8 +161,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -147,11 +177,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_FREEZER is not set
 CONFIG_PPC4xx_PCI_EXPRESS=y
 
@@ -172,6 +197,7 @@ CONFIG_PPC4xx_PCI_EXPRESS=y
 CONFIG_ARCHES=y
 # CONFIG_CANYONLANDS is not set
 # CONFIG_GLACIER is not set
+# CONFIG_REDWOOD is not set
 # CONFIG_YOSEMITE is not set
 # CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
 CONFIG_PPC44x_SIMPLE=y
@@ -214,6 +240,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
@@ -233,10 +260,14 @@ CONFIG_PHYS_ADDR_T_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_STDBINUTILS=y
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
@@ -261,6 +292,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
@@ -278,14 +310,12 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -335,6 +365,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -347,7 +379,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
@@ -371,8 +402,92 @@ CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=y
 CONFIG_PROC_EVENTS=y
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -412,7 +527,11 @@ CONFIG_HAVE_IDE=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -433,6 +552,8 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 CONFIG_IBM_NEW_EMAC=y
@@ -451,6 +572,7 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
@@ -461,7 +583,6 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -533,13 +654,143 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_IBM_IIC=y
+# CONFIG_I2C_MPC is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+CONFIG_SENSORS_AD7414=y
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
@@ -556,24 +807,15 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -600,7 +842,12 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -614,11 +861,12 @@ CONFIG_EXT2_FS=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -627,6 +875,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -660,6 +913,17 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -670,6 +934,7 @@ CONFIG_CRAMFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -681,7 +946,6 @@ CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -697,6 +961,7 @@ CONFIG_SUNRPC=y
 CONFIG_MSDOS_PARTITION=y
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -711,11 +976,14 @@ CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -733,6 +1001,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -743,6 +1014,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -754,7 +1028,6 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -762,27 +1035,36 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-
-#
-# Tracers
-#
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_PPC_EMULATED_STATS is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
-- 
cgit v1.2.3


From c9f75093a497bdc7389df983e914da17fad20d95 Mon Sep 17 00:00:00 2001
From: "fkan@amcc.com" <fkan@amcc.com>
Date: Wed, 12 Aug 2009 14:38:47 +0000
Subject: powerpc/44x: Add Eiger AMCC (AppliedMicro) PPC460SX evaluation board
 support.

This patch adds support for the AMCC (AppliedMicro) PPC460SX Eiger evaluation
board.

Signed-off-by: Tai Tri Nguyen <ttnguyen@amcc.com>
Acked-by: Feng Kan <fkan@amcc.com>
Acked-by: Tirumala Marri <tmarri@amcc.com>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
---
 arch/powerpc/boot/dts/eiger.dts            |  421 ++++++++++
 arch/powerpc/configs/44x/eiger_defconfig   | 1252 ++++++++++++++++++++++++++++
 arch/powerpc/platforms/44x/Kconfig         |   12 +
 arch/powerpc/platforms/44x/ppc44x_simple.c |    1 +
 4 files changed, 1686 insertions(+)
 create mode 100644 arch/powerpc/boot/dts/eiger.dts
 create mode 100644 arch/powerpc/configs/44x/eiger_defconfig

(limited to 'arch')

diff --git a/arch/powerpc/boot/dts/eiger.dts b/arch/powerpc/boot/dts/eiger.dts
new file mode 100644
index 00000000000..c4a934f2e88
--- /dev/null
+++ b/arch/powerpc/boot/dts/eiger.dts
@@ -0,0 +1,421 @@
+/*
+ * Device Tree Source for AMCC (AppliedMicro) Eiger(460SX)
+ *
+ * Copyright 2009 AMCC (AppliedMicro) <ttnguyen@amcc.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	model = "amcc,eiger";
+	compatible = "amcc,eiger";
+	dcr-parent = <&{/cpus/cpu@0}>;
+
+	aliases {
+		ethernet0 = &EMAC0;
+		ethernet1 = &EMAC1;
+		ethernet2 = &EMAC2;
+		ethernet3 = &EMAC3;
+		serial0 = &UART0;
+		serial1 = &UART1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,460SX";
+			reg = <0x00000000>;
+			clock-frequency = <0>; /* Filled in by U-Boot */
+			timebase-frequency = <0>; /* Filled in by U-Boot */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			dcr-controller;
+			dcr-access-method = "native";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */
+	};
+
+	UIC0: interrupt-controller0 {
+		compatible = "ibm,uic-460sx","ibm,uic";
+		interrupt-controller;
+		cell-index = <0>;
+		dcr-reg = <0x0c0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+	};
+
+	UIC1: interrupt-controller1 {
+		compatible = "ibm,uic-460sx","ibm,uic";
+		interrupt-controller;
+		cell-index = <1>;
+		dcr-reg = <0x0d0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC2: interrupt-controller2 {
+		compatible = "ibm,uic-460sx","ibm,uic";
+		interrupt-controller;
+		cell-index = <2>;
+		dcr-reg = <0x0e0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0xa 0x4 0xb 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC3: interrupt-controller3 {
+		compatible = "ibm,uic-460sx","ibm,uic";
+		interrupt-controller;
+		cell-index = <3>;
+		dcr-reg = <0x0f0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	SDR0: sdr {
+		compatible = "ibm,sdr-460sx";
+		dcr-reg = <0x00e 0x002>;
+	};
+
+	CPR0: cpr {
+		compatible = "ibm,cpr-460sx";
+		dcr-reg = <0x00c 0x002>;
+	};
+
+	plb {
+		compatible = "ibm,plb-460sx", "ibm,plb4";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+		clock-frequency = <0>; /* Filled in by U-Boot */
+
+		SDRAM0: sdram {
+			compatible = "ibm,sdram-460sx", "ibm,sdram-405gp";
+			dcr-reg = <0x010 0x002>;
+		};
+
+		MAL0: mcmal {
+			compatible = "ibm,mcmal-460sx", "ibm,mcmal2";
+			dcr-reg = <0x180 0x62>;
+			num-tx-chans = <4>;
+			num-rx-chans = <32>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			interrupt-parent = <&UIC1>;
+			interrupts = <	/*TXEOB*/ 0x6 0x4
+					/*RXEOB*/ 0x7 0x4
+					/*SERR*/  0x1 0x4
+					/*TXDE*/  0x2 0x4
+					/*RXDE*/  0x3 0x4
+					/*COAL TX0*/ 0x18 0x2
+					/*COAL TX1*/ 0x19 0x2
+					/*COAL TX2*/ 0x1a 0x2
+					/*COAL TX3*/ 0x1b 0x2
+					/*COAL RX0*/ 0x1c 0x2
+					/*COAL RX1*/ 0x1d 0x2
+					/*COAL RX2*/ 0x1e 0x2
+					/*COAL RX3*/ 0x1f 0x2>;
+		};
+
+		POB0: opb {
+			compatible = "ibm,opb-460sx", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>;
+			clock-frequency = <0>; /* Filled in by U-Boot */
+
+			EBC0: ebc {
+				compatible = "ibm,ebc-460sx", "ibm,ebc";
+				dcr-reg = <0x012 0x002>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				/* ranges property is supplied by U-Boot */
+				interrupts = <0x6 0x4>;
+				interrupt-parent = <&UIC1>;
+
+				nor_flash@0,0 {
+					compatible = "amd,s29gl512n", "cfi-flash";
+					bank-width = <2>;
+					/* reg property is supplied in by U-Boot */
+					#address-cells = <1>;
+					#size-cells = <1>;
+					partition@0 {
+						label = "kernel";
+						reg = <0x00000000 0x001e0000>;
+					};
+					partition@1e0000 {
+						label = "dtb";
+						reg = <0x001e0000 0x00020000>;
+					};
+					partition@200000 {
+						label = "ramdisk";
+						reg = <0x00200000 0x01400000>;
+					};
+					partition@1600000 {
+						label = "jffs2";
+						reg = <0x01600000 0x00400000>;
+					};
+					partition@1a00000 {
+						label = "user";
+						reg = <0x01a00000 0x02560000>;
+					};
+					partition@3f60000 {
+						label = "env";
+						reg = <0x03f60000 0x00040000>;
+					};
+					partition@3fa0000 {
+						label = "u-boot";
+						reg = <0x03fa0000 0x00060000>;
+					};
+				};
+
+				ndfc@1,0 {
+					compatible = "ibm,ndfc";
+					/* reg property is supplied by U-boot */
+					ccr = <0x00003000>;
+					bank-settings = <0x80002222>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					nand {
+						#address-cells = <1>;
+						#size-cells = <1>;
+						partition@0 {
+							label = "uboot";
+							reg = <0x00000000 0x00200000>;
+						};
+						partition@200000 {
+							label = "uboot-environment";
+							reg = <0x00200000 0x00100000>;
+						};
+						partition@300000 {
+							label = "linux";
+							reg = <0x00300000 0x00300000>;
+						};
+						partition@600000 {
+							label = "root-file-system";
+							reg = <0x00600000 0x01900000>;
+						};
+						partition@1f00000 {
+							label = "device-tree";
+							reg = <0x01f00000 0x00020000>;
+						};
+						partition@1f20000 {
+							label = "data";
+							reg = <0x01f20000 0x060E0000>;
+						};
+					};
+				};
+			};
+
+			UART0: serial@ef600200 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xef600200 0x00000008>;
+				virtual-reg = <0xef600200>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				current-speed = <0>; /* Filled in by U-Boot */
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x0 0x4>;
+			};
+
+			UART1: serial@ef600300 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xef600300 0x00000008>;
+				virtual-reg = <0xef600300>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				current-speed = <0>; /* Filled in by U-Boot */
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x1 0x4>;
+			};
+
+			IIC0: i2c@ef600400 {
+				compatible = "ibm,iic-460sx", "ibm,iic";
+				reg = <0xef600400 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x2 0x4>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				index = <0>;
+			};
+
+			IIC1: i2c@ef600500 {
+				compatible = "ibm,iic-460sx", "ibm,iic";
+				reg = <0xef600500 0x00000014>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x3 0x4>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				index = <1>;
+			};
+
+			RGMII0: emac-rgmii@ef600900 {
+				compatible = "ibm,rgmii-460sx", "ibm,rgmii";
+				reg = <0xef600900 0x00000008>;
+				has-mdio;
+			};
+
+			RGMII1: emac-rgmii@ef600920 {
+				compatible = "ibm,rgmii-460sx", "ibm,rgmii";
+				reg = <0xef600920 0x00000008>;
+				has-mdio;
+			};
+
+			TAH0: emac-tah@ef600e50 {
+				compatible = "ibm,tah-460sx", "ibm,tah";
+				reg = <0xef600e50 0x00000030>;
+			};
+
+			TAH1: emac-tah@ef600f50 {
+				compatible = "ibm,tah-460sx", "ibm,tah";
+				reg = <0xef600f50 0x00000030>;
+			};
+
+			EMAC0: ethernet@ef600a00 {
+				device_type = "network";
+				compatible = "ibm,emac-460sx", "ibm,emac4";
+				interrupt-parent = <&EMAC0>;
+				interrupts = <0x0 0x1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &UIC0 0x13 0x4
+						 /*Wake*/   0x1 &UIC2 0x1d 0x4>;
+				reg = <0xef600a00 0x00000070>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <0>;
+				mal-rx-channel = <0>;
+				cell-index = <0>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				phy-mode = "rgmii";
+				phy-map = <0x00000000>;
+				rgmii-device = <&RGMII0>;
+				rgmii-channel = <0>;
+				tah-device = <&TAH0>;
+				tah-channel = <0>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+			};
+
+			EMAC1: ethernet@ef600b00 {
+				device_type = "network";
+				compatible = "ibm,emac-460sx", "ibm,emac4";
+				interrupt-parent = <&EMAC1>;
+				interrupts = <0x0 0x1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &UIC0 0x14 0x4
+						 /*Wake*/   0x1 &UIC2 0x1d 0x4>;
+				reg = <0xef600b00 0x00000070>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <1>;
+				mal-rx-channel = <8>;
+				cell-index = <1>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				phy-mode = "rgmii";
+				phy-map = <0x00000000>;
+				rgmii-device = <&RGMII0>;
+				rgmii-channel = <1>;
+				tah-device = <&TAH1>;
+				tah-channel = <1>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+				mdio-device = <&EMAC0>;
+			};
+
+			EMAC2: ethernet@ef600c00 {
+				device_type = "network";
+				compatible = "ibm,emac-460sx", "ibm,emac4";
+				interrupt-parent = <&EMAC2>;
+				interrupts = <0x0 0x1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &UIC0 0x15 0x4
+						 /*Wake*/   0x1 &UIC2 0x1d 0x4>;
+				reg = <0xef600c00 0x00000070>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <2>;
+				mal-rx-channel = <16>;
+				cell-index = <2>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				phy-mode = "rgmii";
+				phy-map = <0x00000000>;
+				rgmii-device = <&RGMII1>;
+				rgmii-channel = <0>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+				mdio-device = <&EMAC0>;
+			};
+
+			EMAC3: ethernet@ef600d00 {
+				device_type = "network";
+				compatible = "ibm,emac-460sx", "ibm,emac4";
+				interrupt-parent = <&EMAC3>;
+				interrupts = <0x0 0x1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0x0 &UIC0 0x16 0x4
+						 /*Wake*/   0x1 &UIC2 0x1d 0x4>;
+				reg = <0xef600d00 0x00000070>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <3>;
+				mal-rx-channel = <24>;
+				cell-index = <3>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
+				phy-mode = "rgmii";
+				phy-map = <0x00000000>;
+				rgmii-device = <&RGMII1>;
+				rgmii-channel = <1>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+				mdio-device = <&EMAC0>;
+			};
+		};
+
+	};
+	chosen {
+		linux,stdout-path = "/plb/opb/serial@ef600200";
+	};
+
+};
diff --git a/arch/powerpc/configs/44x/eiger_defconfig b/arch/powerpc/configs/44x/eiger_defconfig
new file mode 100644
index 00000000000..007f3bd939e
--- /dev/null
+++ b/arch/powerpc/configs/44x/eiger_defconfig
@@ -0,0 +1,1252 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.31-rc6
+# Wed Aug 19 13:06:50 2009
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+# CONFIG_PPC_BOOK3S_32 is not set
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+CONFIG_44x=y
+# CONFIG_E200 is not set
+CONFIG_PPC_FPU=y
+CONFIG_4xx=y
+CONFIG_BOOKE=y
+CONFIG_PTE_64BIT=y
+CONFIG_PHYS_64BIT=y
+CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_32=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_NOT_COHERENT_CACHE=y
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
+# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_PPC_DCR_NATIVE=y
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_PPC_DCR=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+# CONFIG_FREEZER is not set
+CONFIG_PPC4xx_PCI_EXPRESS=y
+
+#
+# Platform support
+#
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+# CONFIG_BAMBOO is not set
+# CONFIG_EBONY is not set
+# CONFIG_SAM440EP is not set
+# CONFIG_SEQUOIA is not set
+# CONFIG_TAISHAN is not set
+# CONFIG_KATMAI is not set
+# CONFIG_RAINIER is not set
+# CONFIG_WARP is not set
+# CONFIG_ARCHES is not set
+# CONFIG_CANYONLANDS is not set
+# CONFIG_GLACIER is not set
+# CONFIG_REDWOOD is not set
+CONFIG_EIGER=y
+# CONFIG_YOSEMITE is not set
+# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
+CONFIG_PPC44x_SIMPLE=y
+# CONFIG_PPC4xx_GPIO is not set
+CONFIG_460SX=y
+# CONFIG_IPIC is not set
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_SCHED_HRTICK=y
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_MATH_EMULATION is not set
+# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_STDBINUTILS=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_PROC_DEVICETREE=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE=""
+CONFIG_EXTRA_TARGETS=""
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_4xx_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+# CONFIG_PCIEAER_INJECT is not set
+# CONFIG_PCIEASPM is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_CONSISTENT_SIZE=0x00200000
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+CONFIG_MTD_NAND_ECC_SMC=y
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+CONFIG_MTD_NAND_NDFC=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_CAFE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_NAND_FSL_ELBC is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=35000
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_XILINX_SYSACE is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+CONFIG_SCSI_SAS_ATTRS=y
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_FCOE is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_FUSION=y
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+CONFIG_FUSION_SAS=y
+CONFIG_FUSION_MAX_SGE=128
+# CONFIG_FUSION_CTL is not set
+# CONFIG_FUSION_LOGGING is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+CONFIG_I2O=y
+CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
+CONFIG_I2O_EXT_ADAPTEC=y
+# CONFIG_I2O_CONFIG is not set
+# CONFIG_I2O_BUS is not set
+# CONFIG_I2O_BLOCK is not set
+# CONFIG_I2O_SCSI is not set
+# CONFIG_I2O_PROC is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_IBM_NEW_EMAC=y
+CONFIG_IBM_NEW_EMAC_RXB=256
+CONFIG_IBM_NEW_EMAC_TXB=256
+CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
+CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
+CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
+# CONFIG_IBM_NEW_EMAC_DEBUG is not set
+CONFIG_IBM_NEW_EMAC_ZMII=y
+CONFIG_IBM_NEW_EMAC_RGMII=y
+CONFIG_IBM_NEW_EMAC_TAH=y
+CONFIG_IBM_NEW_EMAC_EMAC4=y
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_ATL2 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+CONFIG_E1000E=y
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_XILINX_LL_TEMAC is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
+# CONFIG_JME is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_PCI is not set
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+CONFIG_SERIAL_8250_EXTENDED=y
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_IBM_IIC=y
+# CONFIG_I2C_MPC is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+CONFIG_I2C_DEBUG_CORE=y
+CONFIG_I2C_DEBUG_ALGO=y
+CONFIG_I2C_DEBUG_BUS=y
+CONFIG_I2C_DEBUG_CHIP=y
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_UWB is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+# CONFIG_RTC_CLASS is not set
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
+CONFIG_PRINT_STACK_DEPTH=64
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_PPC_EMULATED_STATS is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
+# CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
+# CONFIG_VIRQ_DEBUG is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_GF128MUL=y
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_CRYPTO_CRYPTD=y
+CONFIG_CRYPTO_AUTHENC=y
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=y
+CONFIG_CRYPTO_GCM=y
+CONFIG_CRYPTO_SEQIV=y
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=y
+CONFIG_CRYPTO_CTS=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_LRW=y
+CONFIG_CRYPTO_PCBC=y
+CONFIG_CRYPTO_XTS=y
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=y
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_BLOWFISH=y
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_PPC4XX is not set
+# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig
index 90e3192611a..7486bffd3eb 100644
--- a/arch/powerpc/platforms/44x/Kconfig
+++ b/arch/powerpc/platforms/44x/Kconfig
@@ -129,6 +129,18 @@ config REDWOOD
 	help
 	  This option enables support for the AMCC PPC460SX Redwood board.
 
+config EIGER
+	bool "Eiger"
+	depends on 44x
+	default n
+	select PPC44x_SIMPLE
+	select 460SX
+	select PCI
+	select PPC4xx_PCI_EXPRESS
+	select IBM_NEW_EMAC_RGMII
+	help
+	  This option enables support for the AMCC PPC460SX evaluation board.
+
 config YOSEMITE
 	bool "Yosemite"
 	depends on 44x
diff --git a/arch/powerpc/platforms/44x/ppc44x_simple.c b/arch/powerpc/platforms/44x/ppc44x_simple.c
index 5bcd441885e..e8c23ccaa1f 100644
--- a/arch/powerpc/platforms/44x/ppc44x_simple.c
+++ b/arch/powerpc/platforms/44x/ppc44x_simple.c
@@ -55,6 +55,7 @@ static char *board[] __initdata = {
 	"amcc,canyonlands",
 	"amcc,glacier",
 	"ibm,ebony",
+	"amcc,eiger",
 	"amcc,katmai",
 	"amcc,rainier",
 	"amcc,redwood",
-- 
cgit v1.2.3


From 0cdf50a7c65df894fb5fd0ef181fe18b8fec6137 Mon Sep 17 00:00:00 2001
From: Solomon Peachy <solomon@linux-wlan.com>
Date: Thu, 20 Aug 2009 10:19:47 +0000
Subject: powerpc/40x: Add support for the ESTeem 195E (PPC405EP) SBC

This patch adds support for the ESTeem 195E Hotfoot SBC.

There are several variants of the SBC deployed, single/dual
ethernet+serial, and also 4MB/8MB flash variations.  In the interest of
having a single kernel image boot on all boards, the cuboot shim detects
the differences and mangles the DTS tree appropriately.

With the exception of the CF interface that was never populated on
production boards, this code/DTS supports all boardpop options.

Signed-off-by: Solomon Peachy <solomon@linux-wlan.com>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
---
 arch/powerpc/boot/Makefile                 |   4 +-
 arch/powerpc/boot/cuboot-hotfoot.c         | 142 ++++++++++++++
 arch/powerpc/boot/dts/hotfoot.dts          | 294 +++++++++++++++++++++++++++++
 arch/powerpc/boot/ppcboot-hotfoot.h        | 133 +++++++++++++
 arch/powerpc/platforms/40x/Kconfig         |  10 +
 arch/powerpc/platforms/40x/ppc40x_simple.c |   3 +-
 6 files changed, 584 insertions(+), 2 deletions(-)
 create mode 100644 arch/powerpc/boot/cuboot-hotfoot.c
 create mode 100644 arch/powerpc/boot/dts/hotfoot.dts
 create mode 100644 arch/powerpc/boot/ppcboot-hotfoot.h

(limited to 'arch')

diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 9ae7b7e2ba7..5a109a93753 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -39,6 +39,7 @@ DTS_FLAGS	?= -p 1024
 
 $(obj)/4xx.o: BOOTCFLAGS += -mcpu=405
 $(obj)/ebony.o: BOOTCFLAGS += -mcpu=405
+$(obj)/cuboot-hotfoot.o: BOOTCFLAGS += -mcpu=405
 $(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=405
 $(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=405
 $(obj)/cuboot-acadia.o: BOOTCFLAGS += -mcpu=405
@@ -67,7 +68,7 @@ src-wlib := string.S crt0.S crtsavres.S stdio.c main.c \
 		cpm-serial.c stdlib.c mpc52xx-psc.c planetcore.c uartlite.c \
 		fsl-soc.c mpc8xx.c pq2.c
 src-plat := of.c cuboot-52xx.c cuboot-824x.c cuboot-83xx.c cuboot-85xx.c holly.c \
-		cuboot-ebony.c treeboot-ebony.c prpmc2800.c \
+		cuboot-ebony.c cuboot-hotfoot.c treeboot-ebony.c prpmc2800.c \
 		ps3-head.S ps3-hvcall.S ps3.c treeboot-bamboo.c cuboot-8xx.c \
 		cuboot-pq2.c cuboot-sequoia.c treeboot-walnut.c \
 		cuboot-bamboo.c cuboot-mpc7448hpc2.c cuboot-taishan.c \
@@ -190,6 +191,7 @@ image-$(CONFIG_DEFAULT_UIMAGE)		+= uImage
 
 # Board ports in arch/powerpc/platform/40x/Kconfig
 image-$(CONFIG_EP405)			+= dtbImage.ep405
+image-$(CONFIG_HOTFOOT)			+= cuImage.hotfoot
 image-$(CONFIG_WALNUT)			+= treeImage.walnut
 image-$(CONFIG_ACADIA)			+= cuImage.acadia
 
diff --git a/arch/powerpc/boot/cuboot-hotfoot.c b/arch/powerpc/boot/cuboot-hotfoot.c
new file mode 100644
index 00000000000..8f697b958e4
--- /dev/null
+++ b/arch/powerpc/boot/cuboot-hotfoot.c
@@ -0,0 +1,142 @@
+/*
+ * Old U-boot compatibility for Esteem 195E Hotfoot CPU Board
+ *
+ * Author: Solomon Peachy <solomon@linux-wlan.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "ops.h"
+#include "stdio.h"
+#include "reg.h"
+#include "dcr.h"
+#include "4xx.h"
+#include "cuboot.h"
+
+#define TARGET_4xx
+#define TARGET_HOTFOOT
+
+#include "ppcboot-hotfoot.h"
+
+static bd_t bd;
+
+#define NUM_REGS 3
+
+static void hotfoot_fixups(void)
+{
+	u32 uart = mfdcr(DCRN_CPC0_UCR) & 0x7f;
+
+	dt_fixup_memory(bd.bi_memstart, bd.bi_memsize); 
+
+	dt_fixup_cpu_clocks(bd.bi_procfreq, bd.bi_procfreq, 0);
+	dt_fixup_clock("/plb", bd.bi_plb_busfreq);
+	dt_fixup_clock("/plb/opb", bd.bi_opbfreq);
+	dt_fixup_clock("/plb/ebc", bd.bi_pci_busfreq);
+	dt_fixup_clock("/plb/opb/serial@ef600300", bd.bi_procfreq / uart); 
+	dt_fixup_clock("/plb/opb/serial@ef600400", bd.bi_procfreq / uart); 
+	
+	dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr);
+	dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr);
+
+	/* Is this a single eth/serial board? */
+	if ((bd.bi_enet1addr[0] == 0) && 
+	    (bd.bi_enet1addr[1] == 0) &&
+	    (bd.bi_enet1addr[2] == 0) &&
+	    (bd.bi_enet1addr[3] == 0) &&
+	    (bd.bi_enet1addr[4] == 0) &&
+	    (bd.bi_enet1addr[5] == 0)) {
+		void *devp;
+
+		printf("Trimming devtree for single serial/eth board\n");
+
+		devp = finddevice("/plb/opb/serial@ef600300");
+		if (!devp)
+			fatal("Can't find node for /plb/opb/serial@ef600300");
+		del_node(devp);
+
+		devp = finddevice("/plb/opb/ethernet@ef600900");
+		if (!devp)
+			fatal("Can't find node for /plb/opb/ethernet@ef600900");
+		del_node(devp);
+	}
+
+	ibm4xx_quiesce_eth((u32 *)0xef600800, (u32 *)0xef600900);
+
+	/* Fix up flash size in fdt for 4M boards. */
+	if (bd.bi_flashsize < 0x800000) {
+		u32 regs[NUM_REGS];
+		void *devp = finddevice("/plb/ebc/nor_flash@0");
+		if (!devp)
+			fatal("Can't find FDT node for nor_flash!??");
+
+		printf("Fixing devtree for 4M Flash\n");
+		
+		/* First fix up the base addresse */
+		getprop(devp, "reg", regs, sizeof(regs));
+		regs[0] = 0;
+		regs[1] = 0xffc00000;
+		regs[2] = 0x00400000;
+		setprop(devp, "reg", regs, sizeof(regs));
+		
+		/* Then the offsets */
+		devp = finddevice("/plb/ebc/nor_flash@0/partition@0");
+		if (!devp)
+			fatal("Can't find FDT node for partition@0");
+		getprop(devp, "reg", regs, 2*sizeof(u32));
+		regs[0] -= 0x400000;
+		setprop(devp, "reg", regs,  2*sizeof(u32));
+
+		devp = finddevice("/plb/ebc/nor_flash@0/partition@1");
+		if (!devp)
+			fatal("Can't find FDT node for partition@1");
+		getprop(devp, "reg", regs, 2*sizeof(u32));
+		regs[0] -= 0x400000;
+		setprop(devp, "reg", regs,  2*sizeof(u32));
+
+		devp = finddevice("/plb/ebc/nor_flash@0/partition@2");
+		if (!devp)
+			fatal("Can't find FDT node for partition@2");
+		getprop(devp, "reg", regs, 2*sizeof(u32));
+		regs[0] -= 0x400000;
+		setprop(devp, "reg", regs,  2*sizeof(u32));
+
+		devp = finddevice("/plb/ebc/nor_flash@0/partition@3");
+		if (!devp)
+			fatal("Can't find FDT node for partition@3");
+		getprop(devp, "reg", regs, 2*sizeof(u32));
+		regs[0] -= 0x400000;
+		setprop(devp, "reg", regs,  2*sizeof(u32));
+
+		devp = finddevice("/plb/ebc/nor_flash@0/partition@4");
+		if (!devp)
+			fatal("Can't find FDT node for partition@4");
+		getprop(devp, "reg", regs, 2*sizeof(u32));
+		regs[0] -= 0x400000;
+		setprop(devp, "reg", regs,  2*sizeof(u32));
+
+		devp = finddevice("/plb/ebc/nor_flash@0/partition@6");
+		if (!devp)
+			fatal("Can't find FDT node for partition@6");
+		getprop(devp, "reg", regs, 2*sizeof(u32));
+		regs[0] -= 0x400000;
+		setprop(devp, "reg", regs,  2*sizeof(u32));
+
+		/* Delete the FeatFS node */
+		devp = finddevice("/plb/ebc/nor_flash@0/partition@5");
+		if (!devp)
+			fatal("Can't find FDT node for partition@5");
+		del_node(devp);
+	}
+}
+
+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+		   unsigned long r6, unsigned long r7)
+{
+	CUBOOT_INIT();
+	platform_ops.fixups = hotfoot_fixups;
+        platform_ops.exit = ibm40x_dbcr_reset;
+	fdt_init(_dtb_start);
+	serial_console_init();
+}
diff --git a/arch/powerpc/boot/dts/hotfoot.dts b/arch/powerpc/boot/dts/hotfoot.dts
new file mode 100644
index 00000000000..cad9c3840af
--- /dev/null
+++ b/arch/powerpc/boot/dts/hotfoot.dts
@@ -0,0 +1,294 @@
+/*
+ * Device Tree Source for ESTeem 195E Hotfoot
+ *
+ * Copyright 2009 AbsoluteValue Systems <solomon@linux-wlan.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "est,hotfoot";
+	compatible = "est,hotfoot";
+	dcr-parent = <&{/cpus/cpu@0}>;
+
+	aliases {
+		ethernet0 = &EMAC0;
+		ethernet1 = &EMAC1;
+		serial0 = &UART0;
+		serial1 = &UART1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,405EP";
+			reg = <0x00000000>;
+			clock-frequency = <0>; /* Filled in by zImage */
+			timebase-frequency = <0>; /* Filled in by zImage */
+			i-cache-line-size = <0x20>;
+			d-cache-line-size = <0x20>;
+			i-cache-size = <0x4000>;
+			d-cache-size = <0x4000>;
+			dcr-controller;
+			dcr-access-method = "native";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000>; /* Filled in by zImage */
+	};
+
+	UIC0: interrupt-controller {
+		compatible = "ibm,uic";
+		interrupt-controller;
+		cell-index = <0>;
+		dcr-reg = <0x0c0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+	};
+
+	plb {
+		compatible = "ibm,plb3";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		clock-frequency = <0>; /* Filled in by zImage */
+
+		SDRAM0: memory-controller {
+			compatible = "ibm,sdram-405ep";
+			dcr-reg = <0x010 0x002>;
+		};
+
+		MAL: mcmal {
+			compatible = "ibm,mcmal-405ep", "ibm,mcmal";
+			dcr-reg = <0x180 0x062>;
+			num-tx-chans = <4>;
+			num-rx-chans = <2>;
+			interrupt-parent = <&UIC0>;
+			interrupts = <
+				0xb 0x4 /* TXEOB */
+				0xc 0x4 /* RXEOB */
+				0xa 0x4 /* SERR */
+				0xd 0x4 /* TXDE */
+				0xe 0x4 /* RXDE */>;
+		};
+
+		POB0: opb {
+			compatible = "ibm,opb-405ep", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xef600000 0xef600000 0x00a00000>;
+			dcr-reg = <0x0a0 0x005>;
+			clock-frequency = <0>; /* Filled in by zImage */
+
+			/* Hotfoot has UART0/UART1 swapped */
+
+			UART0: serial@ef600400 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xef600400 0x00000008>;
+				virtual-reg = <0xef600400>;
+				clock-frequency = <0>; /* Filled in by zImage */
+				current-speed = <0x9600>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x1 0x4>;
+			};
+
+			UART1: serial@ef600300 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xef600300 0x00000008>;
+				virtual-reg = <0xef600300>;
+				clock-frequency = <0>; /* Filled in by zImage */
+				current-speed = <0x9600>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x0 0x4>;
+			};
+
+			IIC: i2c@ef600500 {
+				compatible = "ibm,iic-405ep", "ibm,iic";
+				reg = <0xef600500 0x00000011>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x2 0x4>;
+
+				rtc@68 {
+					/* Actually a DS1339 */
+					compatible = "dallas,ds1307";
+					reg = <0x68>;
+				};
+
+				temp@4a {
+					/* Not present on all boards */
+					compatible = "national,lm75";
+					reg = <0x4a>;
+				};
+			};
+
+			GPIO: gpio@ef600700 {
+				#gpio-cells = <2>;
+				compatible = "ibm,ppc4xx-gpio";
+				reg = <0xef600700 0x00000020>;
+				gpio-controller;
+			};
+
+			gpio-leds {
+				compatible = "gpio-leds";
+				status {
+					label = "Status";
+					gpios = <&GPIO 1 0>;
+				};
+				radiorx {
+					label = "Rx";
+					gpios = <&GPIO 0xe 0>;
+				};
+			};
+
+			EMAC0: ethernet@ef600800 {
+				linux,network-index = <0x0>;
+				device_type = "network";
+				compatible = "ibm,emac-405ep", "ibm,emac";
+				interrupt-parent = <&UIC0>;
+				interrupts = <
+					0xf 0x4 /* Ethernet */
+					0x9 0x4 /* Ethernet Wake Up */>;
+				local-mac-address = [000000000000]; /* Filled in by zImage */
+				reg = <0xef600800 0x00000070>;
+				mal-device = <&MAL>;
+				mal-tx-channel = <0>;
+				mal-rx-channel = <0>;
+				cell-index = <0>;
+				max-frame-size = <0x5dc>;
+				rx-fifo-size = <0x1000>;
+				tx-fifo-size = <0x800>;
+				phy-mode = "mii";
+				phy-map = <0x00000000>;
+			};
+
+			EMAC1: ethernet@ef600900 {
+				linux,network-index = <0x1>;
+				device_type = "network";
+				compatible = "ibm,emac-405ep", "ibm,emac";
+				interrupt-parent = <&UIC0>;
+				interrupts = <
+					0x11 0x4 /* Ethernet */
+					0x9 0x4 /* Ethernet Wake Up */>;
+				local-mac-address = [000000000000]; /* Filled in by zImage */
+				reg = <0xef600900 0x00000070>;
+				mal-device = <&MAL>;
+				mal-tx-channel = <2>;
+				mal-rx-channel = <1>;
+				cell-index = <1>;
+				max-frame-size = <0x5dc>;
+				rx-fifo-size = <0x1000>;
+				tx-fifo-size = <0x800>;
+				mdio-device = <&EMAC0>;
+				phy-mode = "mii";
+				phy-map = <0x0000001>;
+			};
+		};
+
+		EBC0: ebc {
+			compatible = "ibm,ebc-405ep", "ibm,ebc";
+			dcr-reg = <0x012 0x002>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+
+			/* The ranges property is supplied by the bootwrapper
+			 * and is based on the firmware's configuration of the
+			 * EBC bridge
+			 */
+			clock-frequency = <0>; /* Filled in by zImage */
+
+			nor_flash@0 {
+				compatible = "cfi-flash";
+				bank-width = <2>;
+				reg = <0x0 0xff800000 0x00800000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				/* This mapping is for the 8M flash
+				   4M flash has all ofssets -= 4M,
+				   and FeatFS partition is not present */
+				partition@0 {
+					label = "Bootloader";
+					reg = <0x7c0000 0x40000>;
+					/* read-only; */
+				};
+				partition@1 {
+					label = "Env_and_Config_Primary";
+					reg = <0x400000 0x10000>;
+				};
+				partition@2 {
+					label = "Kernel";
+					reg = <0x420000 0x100000>;
+				};
+				partition@3 {
+					label = "Filesystem";
+					reg = <0x520000 0x2a0000>;
+				};
+				partition@4 {
+					label = "Env_and_Config_Secondary";
+					reg = <0x410000 0x10000>;
+				};
+				partition@5 {
+					label = "FeatFS";
+					reg = <0x000000 0x400000>;
+				};
+				partition@6 {
+					label = "Bootloader_Env";
+					reg = <0x7d0000 0x10000>;
+				};
+			};
+		};
+
+		PCI0: pci@ec000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb405ep-pci", "ibm,plb-pci";
+			primary;
+			reg = <0xeec00000 0x00000008    /* Config space access */
+				0xeed80000 0x00000004    /* IACK */
+				0xeed80000 0x00000004    /* Special cycle */
+				0xef480000 0x00000040>;  /* Internal registers */
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed. Chip supports a second
+			 * IO range but we don't use it for now
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x80000000 0x00000000 0x20000000
+				0x01000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
+
+			interrupt-parent = <&UIC0>;
+			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+			interrupt-map = <
+				/* IDSEL 3 -- slot1 (optional) 27/29 A/B IRQ2/4 */
+				0x1800 0x0 0x0 0x1 &UIC0 0x1b 0x8
+				0x1800 0x0 0x0 0x2 &UIC0 0x1d 0x8
+
+				/* IDSEL 4 -- slot0, 26/28 A/B IRQ1/3 */
+				0x2000 0x0 0x0 0x1 &UIC0 0x1a 0x8
+				0x2000 0x0 0x0 0x2 &UIC0 0x1c 0x8
+				>;
+		};
+	};
+
+	chosen {
+		linux,stdout-path = &UART0;
+	};
+};
diff --git a/arch/powerpc/boot/ppcboot-hotfoot.h b/arch/powerpc/boot/ppcboot-hotfoot.h
new file mode 100644
index 00000000000..1a3e80b533d
--- /dev/null
+++ b/arch/powerpc/boot/ppcboot-hotfoot.h
@@ -0,0 +1,133 @@
+/*
+ * This interface is used for compatibility with old U-boots *ONLY*.
+ * Please do not imitate or extend this.
+ */
+
+/* 
+ * Unfortunately, the ESTeem Hotfoot board uses a mangled version of 
+ * ppcboot.h for historical reasons, and in the interest of having a 
+ * mainline kernel boot on the production board+bootloader, this was the 
+ * least-offensive solution.  Please direct all flames to:
+ *
+ *  Solomon Peachy <solomon@linux-wlan.com>
+ *
+ * (This header is identical to ppcboot.h except for the 
+ *  TARGET_HOTFOOT bits)
+ */
+
+/*
+ * (C) Copyright 2000, 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __PPCBOOT_H__
+#define __PPCBOOT_H__
+
+/*
+ * Board information passed to kernel from PPCBoot
+ *
+ * include/asm-ppc/ppcboot.h
+ */
+
+#include "types.h"
+
+typedef struct bd_info {
+	unsigned long	bi_memstart;	/* start of DRAM memory */
+	unsigned long	bi_memsize;	/* size	 of DRAM memory in bytes */
+	unsigned long	bi_flashstart;	/* start of FLASH memory */
+	unsigned long	bi_flashsize;	/* size	 of FLASH memory */
+	unsigned long	bi_flashoffset; /* reserved area for startup monitor */
+	unsigned long	bi_sramstart;	/* start of SRAM memory */
+	unsigned long	bi_sramsize;	/* size	 of SRAM memory */
+#if defined(TARGET_8xx) || defined(TARGET_CPM2) || defined(TARGET_85xx) ||\
+	defined(TARGET_83xx)
+	unsigned long	bi_immr_base;	/* base of IMMR register */
+#endif
+#if defined(TARGET_PPC_MPC52xx)
+	unsigned long   bi_mbar_base;   /* base of internal registers */
+#endif
+	unsigned long	bi_bootflags;	/* boot / reboot flag (for LynxOS) */
+	unsigned long	bi_ip_addr;	/* IP Address */
+	unsigned char	bi_enetaddr[6];	/* Ethernet address */
+#if defined(TARGET_HOTFOOT)
+	/* second onboard ethernet port */
+	unsigned char	bi_enet1addr[6];
+#define HAVE_ENET1ADDR
+#endif /* TARGET_HOOTFOOT */
+	unsigned short	bi_ethspeed;	/* Ethernet speed in Mbps */
+	unsigned long	bi_intfreq;	/* Internal Freq, in MHz */
+	unsigned long	bi_busfreq;	/* Bus Freq, in MHz */
+#if defined(TARGET_CPM2)
+	unsigned long	bi_cpmfreq;	/* CPM_CLK Freq, in MHz */
+	unsigned long	bi_brgfreq;	/* BRG_CLK Freq, in MHz */
+	unsigned long	bi_sccfreq;	/* SCC_CLK Freq, in MHz */
+	unsigned long	bi_vco;		/* VCO Out from PLL, in MHz */
+#endif
+#if defined(TARGET_PPC_MPC52xx)
+	unsigned long   bi_ipbfreq;     /* IPB Bus Freq, in MHz */
+	unsigned long   bi_pcifreq;     /* PCI Bus Freq, in MHz */
+#endif
+	unsigned long	bi_baudrate;	/* Console Baudrate */
+#if defined(TARGET_4xx)
+	unsigned char	bi_s_version[4];	/* Version of this structure */
+	unsigned char	bi_r_version[32];	/* Version of the ROM (IBM) */
+	unsigned int	bi_procfreq;	/* CPU (Internal) Freq, in Hz */
+	unsigned int	bi_plb_busfreq;	/* PLB Bus speed, in Hz */
+	unsigned int	bi_pci_busfreq;	/* PCI Bus speed, in Hz */
+	unsigned char	bi_pci_enetaddr[6];	/* PCI Ethernet MAC address */
+#endif
+#if defined(TARGET_HOTFOOT)
+	unsigned int     bi_pllouta_freq;       /* PLL OUTA speed, in Hz */
+#endif
+#if defined(TARGET_HYMOD)
+	hymod_conf_t	bi_hymod_conf;	/* hymod configuration information */
+#endif
+#if defined(TARGET_EVB64260) || defined(TARGET_405EP) || defined(TARGET_44x) || \
+	defined(TARGET_85xx) ||	defined(TARGET_83xx) || defined(TARGET_HAS_ETH1)
+	/* second onboard ethernet port */
+	unsigned char	bi_enet1addr[6];
+#define HAVE_ENET1ADDR
+#endif
+#if defined(TARGET_EVB64260) || defined(TARGET_440GX) || \
+    defined(TARGET_85xx) || defined(TARGET_HAS_ETH2)
+	/* third onboard ethernet ports */
+	unsigned char	bi_enet2addr[6];
+#define HAVE_ENET2ADDR
+#endif
+#if defined(TARGET_440GX) || defined(TARGET_HAS_ETH3)
+	/* fourth onboard ethernet ports */
+	unsigned char	bi_enet3addr[6];
+#define HAVE_ENET3ADDR
+#endif
+#if defined(TARGET_HOTFOOT)
+        int             bi_phynum[2];           /* Determines phy mapping */
+        int             bi_phymode[2];          /* Determines phy mode */
+#endif
+#if defined(TARGET_4xx)
+	unsigned int	bi_opbfreq;		/* OB clock in Hz */
+	int		bi_iic_fast[2];		/* Use fast i2c mode */
+#endif
+#if defined(TARGET_440GX)
+	int		bi_phynum[4];		/* phy mapping */
+	int		bi_phymode[4];		/* phy mode */
+#endif
+} bd_t;
+
+#define bi_tbfreq	bi_intfreq
+
+#endif	/* __PPCBOOT_H__ */
diff --git a/arch/powerpc/platforms/40x/Kconfig b/arch/powerpc/platforms/40x/Kconfig
index a6e43cb6f82..ec64264f7a5 100644
--- a/arch/powerpc/platforms/40x/Kconfig
+++ b/arch/powerpc/platforms/40x/Kconfig
@@ -40,6 +40,16 @@ config HCU4
 	help
 	  This option enables support for the Nestal Maschinen HCU4 board.
 
+config HOTFOOT
+        bool "Hotfoot"
+	depends on 40x
+	default n
+	select 405EP
+	select PPC40x_SIMPLE
+	select PCI
+        help
+	 This option enables support for the ESTEEM 195E Hotfoot board.
+
 config KILAUEA
 	bool "Kilauea"
 	depends on 40x
diff --git a/arch/powerpc/platforms/40x/ppc40x_simple.c b/arch/powerpc/platforms/40x/ppc40x_simple.c
index 5fd5a597400..546bbc229d1 100644
--- a/arch/powerpc/platforms/40x/ppc40x_simple.c
+++ b/arch/powerpc/platforms/40x/ppc40x_simple.c
@@ -54,7 +54,8 @@ static char *board[] __initdata = {
 	"amcc,acadia",
 	"amcc,haleakala",
 	"amcc,kilauea",
-	"amcc,makalu"
+	"amcc,makalu",
+	"est,hotfoot"
 };
 
 static int __init ppc40x_probe(void)
-- 
cgit v1.2.3


From 0484c1df473815020bdce4b46b861395759686e5 Mon Sep 17 00:00:00 2001
From: Tiejun Chen <tiejun.chen@windriver.com>
Date: Sat, 22 Aug 2009 16:03:43 +0000
Subject: powerpc/405ex: provide necessary fixup function to support cuImage

For cuImage format it's necessary to provide clock fixups since u-boot will
not pass necessary clock frequency into the dtb included into cuImage so we
implement the clock fixups as defined in the technical documentation for the
board and update header file with the basic register definitions.

Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
---
 arch/powerpc/boot/4xx.c | 142 ++++++++++++++++++++++++++++++++++++++++++++++++
 arch/powerpc/boot/4xx.h |   1 +
 arch/powerpc/boot/dcr.h |   4 +-
 3 files changed, 144 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/boot/4xx.c b/arch/powerpc/boot/4xx.c
index 325b310573b..27db8938827 100644
--- a/arch/powerpc/boot/4xx.c
+++ b/arch/powerpc/boot/4xx.c
@@ -8,6 +8,10 @@
  *   Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
  *   Copyright (c) 2003, 2004 Zultys Technologies
  *
+ * Copyright (C) 2009 Wind River Systems, Inc.
+ *   Updated for supporting PPC405EX on Kilauea.
+ *   Tiejun Chen <tiejun.chen@windriver.com>
+ *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
  * as published by the Free Software Foundation; either version
@@ -659,3 +663,141 @@ void ibm405ep_fixup_clocks(unsigned int sys_clk)
 	dt_fixup_clock("/plb/opb/serial@ef600300", uart0);
 	dt_fixup_clock("/plb/opb/serial@ef600400", uart1);
 }
+
+static u8 ibm405ex_fwdv_multi_bits[] = {
+	/* values for:  1 - 16 */
+	0x01, 0x02, 0x0e, 0x09, 0x04, 0x0b, 0x10, 0x0d, 0x0c, 0x05,
+	0x06, 0x0f, 0x0a, 0x07, 0x08, 0x03
+};
+
+u32 ibm405ex_get_fwdva(unsigned long cpr_fwdv)
+{
+	u32 index;
+
+	for (index = 0; index < ARRAY_SIZE(ibm405ex_fwdv_multi_bits); index++)
+		if (cpr_fwdv == (u32)ibm405ex_fwdv_multi_bits[index])
+			return index + 1;
+
+	return 0;
+}
+
+static u8 ibm405ex_fbdv_multi_bits[] = {
+	/* values for:  1 - 100 */
+	0x00, 0xff, 0x7e, 0xfd, 0x7a, 0xf5, 0x6a, 0xd5, 0x2a, 0xd4,
+	0x29, 0xd3, 0x26, 0xcc, 0x19, 0xb3, 0x67, 0xce, 0x1d, 0xbb,
+	0x77, 0xee, 0x5d, 0xba, 0x74, 0xe9, 0x52, 0xa5, 0x4b, 0x96,
+	0x2c, 0xd8, 0x31, 0xe3, 0x46, 0x8d, 0x1b, 0xb7, 0x6f, 0xde,
+	0x3d, 0xfb, 0x76, 0xed, 0x5a, 0xb5, 0x6b, 0xd6, 0x2d, 0xdb,
+	0x36, 0xec, 0x59, 0xb2, 0x64, 0xc9, 0x12, 0xa4, 0x48, 0x91,
+	0x23, 0xc7, 0x0e, 0x9c, 0x38, 0xf0, 0x61, 0xc2, 0x05, 0x8b,
+	0x17, 0xaf, 0x5f, 0xbe, 0x7c, 0xf9, 0x72, 0xe5, 0x4a, 0x95,
+	0x2b, 0xd7, 0x2e, 0xdc, 0x39, 0xf3, 0x66, 0xcd, 0x1a, 0xb4,
+	0x68, 0xd1, 0x22, 0xc4, 0x09, 0x93, 0x27, 0xcf, 0x1e, 0xbc,
+	/* values for:  101 - 200 */
+	0x78, 0xf1, 0x62, 0xc5, 0x0a, 0x94, 0x28, 0xd0, 0x21, 0xc3,
+	0x06, 0x8c, 0x18, 0xb0, 0x60, 0xc1, 0x02, 0x84, 0x08, 0x90,
+	0x20, 0xc0, 0x01, 0x83, 0x07, 0x8f, 0x1f, 0xbf, 0x7f, 0xfe,
+	0x7d, 0xfa, 0x75, 0xea, 0x55, 0xaa, 0x54, 0xa9, 0x53, 0xa6,
+	0x4c, 0x99, 0x33, 0xe7, 0x4e, 0x9d, 0x3b, 0xf7, 0x6e, 0xdd,
+	0x3a, 0xf4, 0x69, 0xd2, 0x25, 0xcb, 0x16, 0xac, 0x58, 0xb1,
+	0x63, 0xc6, 0x0d, 0x9b, 0x37, 0xef, 0x5e, 0xbd, 0x7b, 0xf6,
+	0x6d, 0xda, 0x35, 0xeb, 0x56, 0xad, 0x5b, 0xb6, 0x6c, 0xd9,
+	0x32, 0xe4, 0x49, 0x92, 0x24, 0xc8, 0x11, 0xa3, 0x47, 0x8e,
+	0x1c, 0xb8, 0x70, 0xe1, 0x42, 0x85, 0x0b, 0x97, 0x2f, 0xdf,
+	/* values for:  201 - 255 */
+	0x3e, 0xfc, 0x79, 0xf2, 0x65, 0xca, 0x15, 0xab, 0x57, 0xae,
+	0x5c, 0xb9, 0x73, 0xe6, 0x4d, 0x9a, 0x34, 0xe8, 0x51, 0xa2,
+	0x44, 0x89, 0x13, 0xa7, 0x4f, 0x9e, 0x3c, 0xf8, 0x71, 0xe2,
+	0x45, 0x8a, 0x14, 0xa8, 0x50, 0xa1, 0x43, 0x86, 0x0c, 0x98,
+	0x30, 0xe0, 0x41, 0x82, 0x04, 0x88, 0x10, 0xa0, 0x40, 0x81,
+	0x03, 0x87, 0x0f, 0x9f, 0x3f  /* END */
+};
+
+u32 ibm405ex_get_fbdv(unsigned long cpr_fbdv)
+{
+	u32 index;
+
+	for (index = 0; index < ARRAY_SIZE(ibm405ex_fbdv_multi_bits); index++)
+		if (cpr_fbdv == (u32)ibm405ex_fbdv_multi_bits[index])
+			return index + 1;
+
+	return 0;
+}
+
+void ibm405ex_fixup_clocks(unsigned int sys_clk, unsigned int uart_clk)
+{
+	/* PLL config */
+	u32 pllc  = CPR0_READ(DCRN_CPR0_PLLC);
+	u32 plld  = CPR0_READ(DCRN_CPR0_PLLD);
+	u32 cpud  = CPR0_READ(DCRN_CPR0_PRIMAD);
+	u32 plbd  = CPR0_READ(DCRN_CPR0_PRIMBD);
+	u32 opbd  = CPR0_READ(DCRN_CPR0_OPBD);
+	u32 perd  = CPR0_READ(DCRN_CPR0_PERD);
+
+	/* Dividers */
+	u32 fbdv   = ibm405ex_get_fbdv(__fix_zero((plld >> 24) & 0xff, 1));
+
+	u32 fwdva  = ibm405ex_get_fwdva(__fix_zero((plld >> 16) & 0x0f, 1));
+
+	u32 cpudv0 = __fix_zero((cpud >> 24) & 7, 8);
+
+	/* PLBDV0 is hardwared to 010. */
+	u32 plbdv0 = 2;
+	u32 plb2xdv0 = __fix_zero((plbd >> 16) & 7, 8);
+
+	u32 opbdv0 = __fix_zero((opbd >> 24) & 3, 4);
+
+	u32 perdv0 = __fix_zero((perd >> 24) & 3, 4);
+
+	/* Resulting clocks */
+	u32 cpu, plb, opb, ebc, vco, tb, uart0, uart1;
+
+	/* PLL's VCO is the source for primary forward ? */
+	if (pllc & 0x40000000) {
+		u32 m;
+
+		/* Feedback path */
+		switch ((pllc >> 24) & 7) {
+		case 0:
+			/* PLLOUTx */
+			m = fbdv;
+			break;
+		case 1:
+			/* CPU */
+			m = fbdv * fwdva * cpudv0;
+			break;
+		case 5:
+			/* PERClk */
+			m = fbdv * fwdva * plb2xdv0 * plbdv0 * opbdv0 * perdv0;
+			break;
+		default:
+			printf("WARNING ! Invalid PLL feedback source !\n");
+			goto bypass;
+		}
+
+		vco = (unsigned int)(sys_clk * m);
+	} else {
+bypass:
+		/* Bypass system PLL */
+		vco = 0;
+	}
+
+	/* CPU = VCO / ( FWDVA x CPUDV0) */
+	cpu = vco / (fwdva * cpudv0);
+	/* PLB = VCO / ( FWDVA x PLB2XDV0 x PLBDV0) */
+	plb = vco / (fwdva * plb2xdv0 * plbdv0);
+	/* OPB = PLB / OPBDV0 */
+	opb = plb / opbdv0;
+	/* EBC = OPB / PERDV0 */
+	ebc = opb / perdv0;
+
+	tb = cpu;
+	uart0 = uart1 = uart_clk;
+
+	dt_fixup_cpu_clocks(cpu, tb, 0);
+	dt_fixup_clock("/plb", plb);
+	dt_fixup_clock("/plb/opb", opb);
+	dt_fixup_clock("/plb/opb/ebc", ebc);
+	dt_fixup_clock("/plb/opb/serial@ef600200", uart0);
+	dt_fixup_clock("/plb/opb/serial@ef600300", uart1);
+}
diff --git a/arch/powerpc/boot/4xx.h b/arch/powerpc/boot/4xx.h
index 2606e64f0c4..7dc5d45361b 100644
--- a/arch/powerpc/boot/4xx.h
+++ b/arch/powerpc/boot/4xx.h
@@ -21,6 +21,7 @@ void ibm4xx_fixup_ebc_ranges(const char *ebc);
 
 void ibm405gp_fixup_clocks(unsigned int sys_clk, unsigned int ser_clk);
 void ibm405ep_fixup_clocks(unsigned int sys_clk);
+void ibm405ex_fixup_clocks(unsigned int sys_clk, unsigned int uart_clk);
 void ibm440gp_fixup_clocks(unsigned int sys_clk, unsigned int ser_clk);
 void ibm440ep_fixup_clocks(unsigned int sys_clk, unsigned int ser_clk,
 			   unsigned int tmr_clk);
diff --git a/arch/powerpc/boot/dcr.h b/arch/powerpc/boot/dcr.h
index 95b9f534401..645a7c964e5 100644
--- a/arch/powerpc/boot/dcr.h
+++ b/arch/powerpc/boot/dcr.h
@@ -153,9 +153,7 @@ static const unsigned long sdram_bxcr[] = { SDRAM0_B0CR, SDRAM0_B1CR,
 #define DCRN_CPC0_PLLMR1  0xf4
 #define DCRN_CPC0_UCR     0xf5
 
-/* 440GX Clock control etc */
-
-
+/* 440GX/405EX Clock Control reg */
 #define DCRN_CPR0_CLKUPD				0x020
 #define DCRN_CPR0_PLLC					0x040
 #define DCRN_CPR0_PLLD					0x060
-- 
cgit v1.2.3


From c5b20d3926dfc9616265b8ff5967cb7a476f9344 Mon Sep 17 00:00:00 2001
From: Tiejun Chen <tiejun.chen@windriver.com>
Date: Sat, 22 Aug 2009 16:03:44 +0000
Subject: powerpc/405ex: support cuImage via included dtb

To support cuImage, we need to initialize the required sections and
ensure that it is built.

Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
---
 arch/powerpc/boot/Makefile         |  2 +-
 arch/powerpc/boot/cuboot-kilauea.c | 49 ++++++++++++++++++++++++++++++++++++++
 2 files changed, 50 insertions(+), 1 deletion(-)
 create mode 100644 arch/powerpc/boot/cuboot-kilauea.c

(limited to 'arch')

diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 5a109a93753..7bfc8ad8779 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -76,7 +76,7 @@ src-plat := of.c cuboot-52xx.c cuboot-824x.c cuboot-83xx.c cuboot-85xx.c holly.c
 		cuboot-katmai.c cuboot-rainier.c redboot-8xx.c ep8248e.c \
 		cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \
 		virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c \
-		cuboot-acadia.c cuboot-amigaone.c
+		cuboot-acadia.c cuboot-amigaone.c cuboot-kilauea.c
 src-boot := $(src-wlib) $(src-plat) empty.c
 
 src-boot := $(addprefix $(obj)/, $(src-boot))
diff --git a/arch/powerpc/boot/cuboot-kilauea.c b/arch/powerpc/boot/cuboot-kilauea.c
new file mode 100644
index 00000000000..80cdad6bbc3
--- /dev/null
+++ b/arch/powerpc/boot/cuboot-kilauea.c
@@ -0,0 +1,49 @@
+/*
+ * Old U-boot compatibility for PPC405EX. This image is already included
+ * a dtb.
+ *
+ * Author: Tiejun Chen <tiejun.chen@windriver.com>
+ *
+ * Copyright (C) 2009 Wind River Systems, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "ops.h"
+#include "io.h"
+#include "dcr.h"
+#include "stdio.h"
+#include "4xx.h"
+#include "44x.h"
+#include "cuboot.h"
+
+#define TARGET_4xx
+#define TARGET_44x
+#include "ppcboot.h"
+
+#define KILAUEA_SYS_EXT_SERIAL_CLOCK     11059200        /* ext. 11.059MHz clk */
+
+static bd_t bd;
+
+static void kilauea_fixups(void)
+{
+	unsigned long sysclk = 33333333;
+
+	ibm405ex_fixup_clocks(sysclk, KILAUEA_SYS_EXT_SERIAL_CLOCK);
+	dt_fixup_memory(bd.bi_memstart, bd.bi_memsize);
+	ibm4xx_fixup_ebc_ranges("/plb/opb/ebc");
+	dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr);
+	dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr);
+}
+
+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+		unsigned long r6, unsigned long r7)
+{
+	CUBOOT_INIT();
+	platform_ops.fixups = kilauea_fixups;
+	platform_ops.exit = ibm40x_dbcr_reset;
+	fdt_init(_dtb_start);
+	serial_console_init();
+}
-- 
cgit v1.2.3


From 8307a98097222f4d9c2e62ebccd6f5df439328de Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Mon, 31 Aug 2009 14:43:31 +0200
Subject: locking, powerpc: Rename __spin_try_lock() and friends

Needed to avoid namespace conflicts when the common code
function bodies of _spin_try_lock() etc. are moved to a header
file where the function name would be __spin_try_lock().

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Horst Hartmann <horsth@linux.vnet.ibm.com>
Cc: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: David Miller <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: <linux-arch@vger.kernel.org>
LKML-Reference: <20090831124415.918799705@de.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/powerpc/include/asm/spinlock.h | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/spinlock.h b/arch/powerpc/include/asm/spinlock.h
index c3b193121f8..198266cf9e2 100644
--- a/arch/powerpc/include/asm/spinlock.h
+++ b/arch/powerpc/include/asm/spinlock.h
@@ -54,7 +54,7 @@
  * This returns the old value in the lock, so we succeeded
  * in getting the lock if the return value is 0.
  */
-static inline unsigned long __spin_trylock(raw_spinlock_t *lock)
+static inline unsigned long arch_spin_trylock(raw_spinlock_t *lock)
 {
 	unsigned long tmp, token;
 
@@ -76,7 +76,7 @@ static inline unsigned long __spin_trylock(raw_spinlock_t *lock)
 static inline int __raw_spin_trylock(raw_spinlock_t *lock)
 {
 	CLEAR_IO_SYNC;
-	return __spin_trylock(lock) == 0;
+	return arch_spin_trylock(lock) == 0;
 }
 
 /*
@@ -108,7 +108,7 @@ static inline void __raw_spin_lock(raw_spinlock_t *lock)
 {
 	CLEAR_IO_SYNC;
 	while (1) {
-		if (likely(__spin_trylock(lock) == 0))
+		if (likely(arch_spin_trylock(lock) == 0))
 			break;
 		do {
 			HMT_low();
@@ -126,7 +126,7 @@ void __raw_spin_lock_flags(raw_spinlock_t *lock, unsigned long flags)
 
 	CLEAR_IO_SYNC;
 	while (1) {
-		if (likely(__spin_trylock(lock) == 0))
+		if (likely(arch_spin_trylock(lock) == 0))
 			break;
 		local_save_flags(flags_dis);
 		local_irq_restore(flags);
@@ -181,7 +181,7 @@ extern void __raw_spin_unlock_wait(raw_spinlock_t *lock);
  * This returns the old value in the lock + 1,
  * so we got a read lock if the return value is > 0.
  */
-static inline long __read_trylock(raw_rwlock_t *rw)
+static inline long arch_read_trylock(raw_rwlock_t *rw)
 {
 	long tmp;
 
@@ -205,7 +205,7 @@ static inline long __read_trylock(raw_rwlock_t *rw)
  * This returns the old value in the lock,
  * so we got the write lock if the return value is 0.
  */
-static inline long __write_trylock(raw_rwlock_t *rw)
+static inline long arch_write_trylock(raw_rwlock_t *rw)
 {
 	long tmp, token;
 
@@ -228,7 +228,7 @@ static inline long __write_trylock(raw_rwlock_t *rw)
 static inline void __raw_read_lock(raw_rwlock_t *rw)
 {
 	while (1) {
-		if (likely(__read_trylock(rw) > 0))
+		if (likely(arch_read_trylock(rw) > 0))
 			break;
 		do {
 			HMT_low();
@@ -242,7 +242,7 @@ static inline void __raw_read_lock(raw_rwlock_t *rw)
 static inline void __raw_write_lock(raw_rwlock_t *rw)
 {
 	while (1) {
-		if (likely(__write_trylock(rw) == 0))
+		if (likely(arch_write_trylock(rw) == 0))
 			break;
 		do {
 			HMT_low();
@@ -255,12 +255,12 @@ static inline void __raw_write_lock(raw_rwlock_t *rw)
 
 static inline int __raw_read_trylock(raw_rwlock_t *rw)
 {
-	return __read_trylock(rw) > 0;
+	return arch_read_trylock(rw) > 0;
 }
 
 static inline int __raw_write_trylock(raw_rwlock_t *rw)
 {
-	return __write_trylock(rw) == 0;
+	return arch_write_trylock(rw) == 0;
 }
 
 static inline void __raw_read_unlock(raw_rwlock_t *rw)
-- 
cgit v1.2.3


From 9f34ceb60357a7166c929d7b52bd057ad7ffc54b Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Mon, 31 Aug 2009 14:43:32 +0200
Subject: locking, sparc: Rename __spin_try_lock() and friends

Needed to avoid namespace conflicts when the common code
function bodies of _spin_try_lock() etc. are moved to a header
file where the function name would be __spin_try_lock().

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Horst Hartmann <horsth@linux.vnet.ibm.com>
Cc: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: David Miller <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: <linux-arch@vger.kernel.org>
LKML-Reference: <20090831124416.306495811@de.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/sparc/include/asm/spinlock_32.h | 12 ++++++------
 arch/sparc/include/asm/spinlock_64.h | 28 ++++++++++++++--------------
 2 files changed, 20 insertions(+), 20 deletions(-)

(limited to 'arch')

diff --git a/arch/sparc/include/asm/spinlock_32.h b/arch/sparc/include/asm/spinlock_32.h
index 46f91ab66a5..857630cff63 100644
--- a/arch/sparc/include/asm/spinlock_32.h
+++ b/arch/sparc/include/asm/spinlock_32.h
@@ -76,7 +76,7 @@ static inline void __raw_spin_unlock(raw_spinlock_t *lock)
  *
  * Unfortunately this scheme limits us to ~16,000,000 cpus.
  */
-static inline void __read_lock(raw_rwlock_t *rw)
+static inline void arch_read_lock(raw_rwlock_t *rw)
 {
 	register raw_rwlock_t *lp asm("g1");
 	lp = rw;
@@ -92,11 +92,11 @@ static inline void __read_lock(raw_rwlock_t *rw)
 #define __raw_read_lock(lock) \
 do {	unsigned long flags; \
 	local_irq_save(flags); \
-	__read_lock(lock); \
+	arch_read_lock(lock); \
 	local_irq_restore(flags); \
 } while(0)
 
-static inline void __read_unlock(raw_rwlock_t *rw)
+static inline void arch_read_unlock(raw_rwlock_t *rw)
 {
 	register raw_rwlock_t *lp asm("g1");
 	lp = rw;
@@ -112,7 +112,7 @@ static inline void __read_unlock(raw_rwlock_t *rw)
 #define __raw_read_unlock(lock) \
 do {	unsigned long flags; \
 	local_irq_save(flags); \
-	__read_unlock(lock); \
+	arch_read_unlock(lock); \
 	local_irq_restore(flags); \
 } while(0)
 
@@ -150,7 +150,7 @@ static inline int __raw_write_trylock(raw_rwlock_t *rw)
 	return (val == 0);
 }
 
-static inline int __read_trylock(raw_rwlock_t *rw)
+static inline int arch_read_trylock(raw_rwlock_t *rw)
 {
 	register raw_rwlock_t *lp asm("g1");
 	register int res asm("o0");
@@ -169,7 +169,7 @@ static inline int __read_trylock(raw_rwlock_t *rw)
 ({	unsigned long flags; \
 	int res; \
 	local_irq_save(flags); \
-	res = __read_trylock(lock); \
+	res = arch_read_trylock(lock); \
 	local_irq_restore(flags); \
 	res; \
 })
diff --git a/arch/sparc/include/asm/spinlock_64.h b/arch/sparc/include/asm/spinlock_64.h
index f6b2b92ad8d..43e51478358 100644
--- a/arch/sparc/include/asm/spinlock_64.h
+++ b/arch/sparc/include/asm/spinlock_64.h
@@ -92,7 +92,7 @@ static inline void __raw_spin_lock_flags(raw_spinlock_t *lock, unsigned long fla
 
 /* Multi-reader locks, these are much saner than the 32-bit Sparc ones... */
 
-static void inline __read_lock(raw_rwlock_t *lock)
+static void inline arch_read_lock(raw_rwlock_t *lock)
 {
 	unsigned long tmp1, tmp2;
 
@@ -115,7 +115,7 @@ static void inline __read_lock(raw_rwlock_t *lock)
 	: "memory");
 }
 
-static int inline __read_trylock(raw_rwlock_t *lock)
+static int inline arch_read_trylock(raw_rwlock_t *lock)
 {
 	int tmp1, tmp2;
 
@@ -136,7 +136,7 @@ static int inline __read_trylock(raw_rwlock_t *lock)
 	return tmp1;
 }
 
-static void inline __read_unlock(raw_rwlock_t *lock)
+static void inline arch_read_unlock(raw_rwlock_t *lock)
 {
 	unsigned long tmp1, tmp2;
 
@@ -152,7 +152,7 @@ static void inline __read_unlock(raw_rwlock_t *lock)
 	: "memory");
 }
 
-static void inline __write_lock(raw_rwlock_t *lock)
+static void inline arch_write_lock(raw_rwlock_t *lock)
 {
 	unsigned long mask, tmp1, tmp2;
 
@@ -177,7 +177,7 @@ static void inline __write_lock(raw_rwlock_t *lock)
 	: "memory");
 }
 
-static void inline __write_unlock(raw_rwlock_t *lock)
+static void inline arch_write_unlock(raw_rwlock_t *lock)
 {
 	__asm__ __volatile__(
 "	stw		%%g0, [%0]"
@@ -186,7 +186,7 @@ static void inline __write_unlock(raw_rwlock_t *lock)
 	: "memory");
 }
 
-static int inline __write_trylock(raw_rwlock_t *lock)
+static int inline arch_write_trylock(raw_rwlock_t *lock)
 {
 	unsigned long mask, tmp1, tmp2, result;
 
@@ -210,14 +210,14 @@ static int inline __write_trylock(raw_rwlock_t *lock)
 	return result;
 }
 
-#define __raw_read_lock(p)	__read_lock(p)
-#define __raw_read_lock_flags(p, f) __read_lock(p)
-#define __raw_read_trylock(p)	__read_trylock(p)
-#define __raw_read_unlock(p)	__read_unlock(p)
-#define __raw_write_lock(p)	__write_lock(p)
-#define __raw_write_lock_flags(p, f) __write_lock(p)
-#define __raw_write_unlock(p)	__write_unlock(p)
-#define __raw_write_trylock(p)	__write_trylock(p)
+#define __raw_read_lock(p)	arch_read_lock(p)
+#define __raw_read_lock_flags(p, f) arch_read_lock(p)
+#define __raw_read_trylock(p)	arch_read_trylock(p)
+#define __raw_read_unlock(p)	arch_read_unlock(p)
+#define __raw_write_lock(p)	arch_write_lock(p)
+#define __raw_write_lock_flags(p, f) arch_write_lock(p)
+#define __raw_write_unlock(p)	arch_write_unlock(p)
+#define __raw_write_trylock(p)	arch_write_trylock(p)
 
 #define __raw_read_can_lock(rw)		(!((rw)->lock & 0x80000000UL))
 #define __raw_write_can_lock(rw)	(!(rw)->lock)
-- 
cgit v1.2.3


From f159ee782990aacb5494738c98f13a2aa61dbb4a Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Mon, 31 Aug 2009 14:43:33 +0200
Subject: locking, m68k/asm-offsets: Rename pt_regs offset defines

In order to be able to use asm-offsets.h in C files the
existing namespace conflicts must be solved first. In
asm-offsets.h e.g. PT_D0 gets defined which is the offset of
the d0 member of the pt_regs structure. However a same define
(with a different meaning) exists in asm/ptregs.h.

So rename the defines created with the asm-offset mechanism to
PT_OFF_D0 etc. There also already exist a few defines with
these names that have the same meaning. So remove the existing
defines and use the asm-offset generated ones.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Horst Hartmann <horsth@linux.vnet.ibm.com>
Cc: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: David Miller <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: <linux-arch@vger.kernel.org>
LKML-Reference: <20090831124416.666403991@de.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/m68k/include/asm/entry_mm.h |  3 ---
 arch/m68k/include/asm/entry_no.h |  8 ++++----
 arch/m68k/include/asm/math-emu.h | 20 ++++++++++----------
 arch/m68k/kernel/asm-offsets.c   | 26 +++++++++++++-------------
 arch/m68k/kernel/entry.S         | 22 +++++++++++-----------
 arch/m68k/math-emu/fp_entry.S    | 30 +++++++++++++++---------------
 6 files changed, 53 insertions(+), 56 deletions(-)

(limited to 'arch')

diff --git a/arch/m68k/include/asm/entry_mm.h b/arch/m68k/include/asm/entry_mm.h
index 5202f5a5b42..4fcfc28c061 100644
--- a/arch/m68k/include/asm/entry_mm.h
+++ b/arch/m68k/include/asm/entry_mm.h
@@ -118,9 +118,6 @@ PT_DTRACE_BIT = 2
 #define STR(X) STR1(X)
 #define STR1(X) #X
 
-#define PT_OFF_ORIG_D0	 0x24
-#define PT_OFF_FORMATVEC 0x32
-#define PT_OFF_SR	 0x2C
 #define SAVE_ALL_INT				\
 	"clrl	%%sp@-;"    /* stk_adj */	\
 	"pea	-1:w;"	    /* orig d0 = -1 */	\
diff --git a/arch/m68k/include/asm/entry_no.h b/arch/m68k/include/asm/entry_no.h
index c2553d26273..907ed03d792 100644
--- a/arch/m68k/include/asm/entry_no.h
+++ b/arch/m68k/include/asm/entry_no.h
@@ -72,8 +72,8 @@ LENOSYS = 38
 	lea	%sp@(-32),%sp		/* space for 8 regs */
 	moveml	%d1-%d5/%a0-%a2,%sp@
 	movel	sw_usp,%a0		/* get usp */
-	movel	%a0@-,%sp@(PT_PC)	/* copy exception program counter */
-	movel	%a0@-,%sp@(PT_FORMATVEC)/* copy exception format/vector/sr */
+	movel	%a0@-,%sp@(PT_OFF_PC)	/* copy exception program counter */
+	movel	%a0@-,%sp@(PT_OFF_FORMATVEC)/*copy exception format/vector/sr */
 	bra	7f
 	6:
 	clrl	%sp@-			/* stkadj */
@@ -89,8 +89,8 @@ LENOSYS = 38
 	bnes	8f			/* no, skip */
 	move	#0x2700,%sr		/* disable intrs */
 	movel	sw_usp,%a0		/* get usp */
-	movel	%sp@(PT_PC),%a0@-	/* copy exception program counter */
-	movel	%sp@(PT_FORMATVEC),%a0@-/* copy exception format/vector/sr */
+	movel	%sp@(PT_OFF_PC),%a0@-	/* copy exception program counter */
+	movel	%sp@(PT_OFF_FORMATVEC),%a0@-/*copy exception format/vector/sr */
 	moveml	%sp@,%d1-%d5/%a0-%a2
 	lea	%sp@(32),%sp		/* space for 8 regs */
 	movel	%sp@+,%d0
diff --git a/arch/m68k/include/asm/math-emu.h b/arch/m68k/include/asm/math-emu.h
index ddfab96403c..5e9249b0014 100644
--- a/arch/m68k/include/asm/math-emu.h
+++ b/arch/m68k/include/asm/math-emu.h
@@ -145,16 +145,16 @@ extern unsigned int fp_debugprint;
  * these are only used during instruction decoding
  * where we always know how deep we're on the stack.
  */
-#define FPS_DO		(PT_D0)
-#define FPS_D1		(PT_D1)
-#define FPS_D2		(PT_D2)
-#define FPS_A0		(PT_A0)
-#define FPS_A1		(PT_A1)
-#define FPS_A2		(PT_A2)
-#define FPS_SR		(PT_SR)
-#define FPS_PC		(PT_PC)
-#define FPS_EA		(PT_PC+6)
-#define FPS_PC2		(PT_PC+10)
+#define FPS_DO		(PT_OFF_D0)
+#define FPS_D1		(PT_OFF_D1)
+#define FPS_D2		(PT_OFF_D2)
+#define FPS_A0		(PT_OFF_A0)
+#define FPS_A1		(PT_OFF_A1)
+#define FPS_A2		(PT_OFF_A2)
+#define FPS_SR		(PT_OFF_SR)
+#define FPS_PC		(PT_OFF_PC)
+#define FPS_EA		(PT_OFF_PC+6)
+#define FPS_PC2		(PT_OFF_PC+10)
 
 .macro	fp_get_fp_reg
 	lea	(FPD_FPREG,FPDATA,%d0.w*4),%a0
diff --git a/arch/m68k/kernel/asm-offsets.c b/arch/m68k/kernel/asm-offsets.c
index b1f012f6c49..0cffab8d244 100644
--- a/arch/m68k/kernel/asm-offsets.c
+++ b/arch/m68k/kernel/asm-offsets.c
@@ -44,20 +44,20 @@ int main(void)
 	DEFINE(TINFO_FLAGS, offsetof(struct thread_info, flags));
 
 	/* offsets into the pt_regs */
-	DEFINE(PT_D0, offsetof(struct pt_regs, d0));
-	DEFINE(PT_ORIG_D0, offsetof(struct pt_regs, orig_d0));
-	DEFINE(PT_D1, offsetof(struct pt_regs, d1));
-	DEFINE(PT_D2, offsetof(struct pt_regs, d2));
-	DEFINE(PT_D3, offsetof(struct pt_regs, d3));
-	DEFINE(PT_D4, offsetof(struct pt_regs, d4));
-	DEFINE(PT_D5, offsetof(struct pt_regs, d5));
-	DEFINE(PT_A0, offsetof(struct pt_regs, a0));
-	DEFINE(PT_A1, offsetof(struct pt_regs, a1));
-	DEFINE(PT_A2, offsetof(struct pt_regs, a2));
-	DEFINE(PT_PC, offsetof(struct pt_regs, pc));
-	DEFINE(PT_SR, offsetof(struct pt_regs, sr));
+	DEFINE(PT_OFF_D0, offsetof(struct pt_regs, d0));
+	DEFINE(PT_OFF_ORIG_D0, offsetof(struct pt_regs, orig_d0));
+	DEFINE(PT_OFF_D1, offsetof(struct pt_regs, d1));
+	DEFINE(PT_OFF_D2, offsetof(struct pt_regs, d2));
+	DEFINE(PT_OFF_D3, offsetof(struct pt_regs, d3));
+	DEFINE(PT_OFF_D4, offsetof(struct pt_regs, d4));
+	DEFINE(PT_OFF_D5, offsetof(struct pt_regs, d5));
+	DEFINE(PT_OFF_A0, offsetof(struct pt_regs, a0));
+	DEFINE(PT_OFF_A1, offsetof(struct pt_regs, a1));
+	DEFINE(PT_OFF_A2, offsetof(struct pt_regs, a2));
+	DEFINE(PT_OFF_PC, offsetof(struct pt_regs, pc));
+	DEFINE(PT_OFF_SR, offsetof(struct pt_regs, sr));
 	/* bitfields are a bit difficult */
-	DEFINE(PT_VECTOR, offsetof(struct pt_regs, pc) + 4);
+	DEFINE(PT_OFF_FORMATVEC, offsetof(struct pt_regs, pc) + 4);
 
 	/* offsets into the irq_handler struct */
 	DEFINE(IRQ_HANDLER, offsetof(struct irq_node, handler));
diff --git a/arch/m68k/kernel/entry.S b/arch/m68k/kernel/entry.S
index c3735cd6207..922f52e7ed1 100644
--- a/arch/m68k/kernel/entry.S
+++ b/arch/m68k/kernel/entry.S
@@ -77,17 +77,17 @@ ENTRY(ret_from_fork)
 	jra	.Lret_from_exception
 
 do_trace_entry:
-	movel	#-ENOSYS,%sp@(PT_D0)	| needed for strace
+	movel	#-ENOSYS,%sp@(PT_OFF_D0)| needed for strace
 	subql	#4,%sp
 	SAVE_SWITCH_STACK
 	jbsr	syscall_trace
 	RESTORE_SWITCH_STACK
 	addql	#4,%sp
-	movel	%sp@(PT_ORIG_D0),%d0
+	movel	%sp@(PT_OFF_ORIG_D0),%d0
 	cmpl	#NR_syscalls,%d0
 	jcs	syscall
 badsys:
-	movel	#-ENOSYS,%sp@(PT_D0)
+	movel	#-ENOSYS,%sp@(PT_OFF_D0)
 	jra	ret_from_syscall
 
 do_trace_exit:
@@ -103,7 +103,7 @@ ENTRY(ret_from_signal)
 	addql	#4,%sp
 /* on 68040 complete pending writebacks if any */
 #ifdef CONFIG_M68040
-	bfextu	%sp@(PT_VECTOR){#0,#4},%d0
+	bfextu	%sp@(PT_OFF_FORMATVEC){#0,#4},%d0
 	subql	#7,%d0				| bus error frame ?
 	jbne	1f
 	movel	%sp,%sp@-
@@ -127,7 +127,7 @@ ENTRY(system_call)
 	jcc	badsys
 syscall:
 	jbsr	@(sys_call_table,%d0:l:4)@(0)
-	movel	%d0,%sp@(PT_D0)		| save the return value
+	movel	%d0,%sp@(PT_OFF_D0)	| save the return value
 ret_from_syscall:
 	|oriw	#0x0700,%sr
 	movew	%curptr@(TASK_INFO+TINFO_FLAGS+2),%d0
@@ -135,7 +135,7 @@ ret_from_syscall:
 1:	RESTORE_ALL
 
 syscall_exit_work:
-	btst	#5,%sp@(PT_SR)		| check if returning to kernel
+	btst	#5,%sp@(PT_OFF_SR)	| check if returning to kernel
 	bnes	1b			| if so, skip resched, signals
 	lslw	#1,%d0
 	jcs	do_trace_exit
@@ -148,7 +148,7 @@ syscall_exit_work:
 
 ENTRY(ret_from_exception)
 .Lret_from_exception:
-	btst	#5,%sp@(PT_SR)		| check if returning to kernel
+	btst	#5,%sp@(PT_OFF_SR)	| check if returning to kernel
 	bnes	1f			| if so, skip resched, signals
 	| only allow interrupts when we are really the last one on the
 	| kernel stack, otherwise stack overflow can occur during
@@ -182,7 +182,7 @@ do_signal_return:
 	jbra	resume_userspace
 
 do_delayed_trace:
-	bclr	#7,%sp@(PT_SR)		| clear trace bit in SR
+	bclr	#7,%sp@(PT_OFF_SR)	| clear trace bit in SR
 	pea	1			| send SIGTRAP
 	movel	%curptr,%sp@-
 	pea	LSIGTRAP
@@ -199,7 +199,7 @@ ENTRY(auto_inthandler)
 	GET_CURRENT(%d0)
 	addqb	#1,%curptr@(TASK_INFO+TINFO_PREEMPT+1)
 					|  put exception # in d0
-	bfextu	%sp@(PT_VECTOR){#4,#10},%d0
+	bfextu	%sp@(PT_OFF_FORMATVEC){#4,#10},%d0
 	subw	#VEC_SPUR,%d0
 
 	movel	%sp,%sp@-
@@ -216,7 +216,7 @@ ret_from_interrupt:
 	ALIGN
 ret_from_last_interrupt:
 	moveq	#(~ALLOWINT>>8)&0xff,%d0
-	andb	%sp@(PT_SR),%d0
+	andb	%sp@(PT_OFF_SR),%d0
 	jne	2b
 
 	/* check if we need to do software interrupts */
@@ -232,7 +232,7 @@ ENTRY(user_inthandler)
 	GET_CURRENT(%d0)
 	addqb	#1,%curptr@(TASK_INFO+TINFO_PREEMPT+1)
 					|  put exception # in d0
-	bfextu	%sp@(PT_VECTOR){#4,#10},%d0
+	bfextu	%sp@(PT_OFF_FORMATVEC){#4,#10},%d0
 user_irqvec_fixup = . + 2
 	subw	#VEC_USER,%d0
 
diff --git a/arch/m68k/math-emu/fp_entry.S b/arch/m68k/math-emu/fp_entry.S
index 954b4f304a7..916c6f3d1f0 100644
--- a/arch/m68k/math-emu/fp_entry.S
+++ b/arch/m68k/math-emu/fp_entry.S
@@ -122,17 +122,17 @@ fp_get_data_reg:
 	.long	fp_get_d6, fp_get_d7
 
 fp_get_d0:
-	move.l	(PT_D0+8,%sp),%d0
+	move.l	(PT_OFF_D0+8,%sp),%d0
 	printf	PREGISTER,"{d0->%08x}",1,%d0
 	rts
 
 fp_get_d1:
-	move.l	(PT_D1+8,%sp),%d0
+	move.l	(PT_OFF_D1+8,%sp),%d0
 	printf	PREGISTER,"{d1->%08x}",1,%d0
 	rts
 
 fp_get_d2:
-	move.l	(PT_D2+8,%sp),%d0
+	move.l	(PT_OFF_D2+8,%sp),%d0
 	printf	PREGISTER,"{d2->%08x}",1,%d0
 	rts
 
@@ -173,35 +173,35 @@ fp_put_data_reg:
 
 fp_put_d0:
 	printf	PREGISTER,"{d0<-%08x}",1,%d0
-	move.l	%d0,(PT_D0+8,%sp)
+	move.l	%d0,(PT_OFF_D0+8,%sp)
 	rts
 
 fp_put_d1:
 	printf	PREGISTER,"{d1<-%08x}",1,%d0
-	move.l	%d0,(PT_D1+8,%sp)
+	move.l	%d0,(PT_OFF_D1+8,%sp)
 	rts
 
 fp_put_d2:
 	printf	PREGISTER,"{d2<-%08x}",1,%d0
-	move.l	%d0,(PT_D2+8,%sp)
+	move.l	%d0,(PT_OFF_D2+8,%sp)
 	rts
 
 fp_put_d3:
 	printf	PREGISTER,"{d3<-%08x}",1,%d0
 |	move.l	%d0,%d3
-	move.l	%d0,(PT_D3+8,%sp)
+	move.l	%d0,(PT_OFF_D3+8,%sp)
 	rts
 
 fp_put_d4:
 	printf	PREGISTER,"{d4<-%08x}",1,%d0
 |	move.l	%d0,%d4
-	move.l	%d0,(PT_D4+8,%sp)
+	move.l	%d0,(PT_OFF_D4+8,%sp)
 	rts
 
 fp_put_d5:
 	printf	PREGISTER,"{d5<-%08x}",1,%d0
 |	move.l	%d0,%d5
-	move.l	%d0,(PT_D5+8,%sp)
+	move.l	%d0,(PT_OFF_D5+8,%sp)
 	rts
 
 fp_put_d6:
@@ -225,17 +225,17 @@ fp_get_addr_reg:
 	.long	fp_get_a6, fp_get_a7
 
 fp_get_a0:
-	move.l	(PT_A0+8,%sp),%a0
+	move.l	(PT_OFF_A0+8,%sp),%a0
 	printf	PREGISTER,"{a0->%08x}",1,%a0
 	rts
 
 fp_get_a1:
-	move.l	(PT_A1+8,%sp),%a0
+	move.l	(PT_OFF_A1+8,%sp),%a0
 	printf	PREGISTER,"{a1->%08x}",1,%a0
 	rts
 
 fp_get_a2:
-	move.l	(PT_A2+8,%sp),%a0
+	move.l	(PT_OFF_A2+8,%sp),%a0
 	printf	PREGISTER,"{a2->%08x}",1,%a0
 	rts
 
@@ -276,17 +276,17 @@ fp_put_addr_reg:
 
 fp_put_a0:
 	printf	PREGISTER,"{a0<-%08x}",1,%a0
-	move.l	%a0,(PT_A0+8,%sp)
+	move.l	%a0,(PT_OFF_A0+8,%sp)
 	rts
 
 fp_put_a1:
 	printf	PREGISTER,"{a1<-%08x}",1,%a0
-	move.l	%a0,(PT_A1+8,%sp)
+	move.l	%a0,(PT_OFF_A1+8,%sp)
 	rts
 
 fp_put_a2:
 	printf	PREGISTER,"{a2<-%08x}",1,%a0
-	move.l	%a0,(PT_A2+8,%sp)
+	move.l	%a0,(PT_OFF_A2+8,%sp)
 	rts
 
 fp_put_a3:
-- 
cgit v1.2.3


From 0ee000e5e8fa2e5c760250be0d78d5906e3eb94b Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Mon, 31 Aug 2009 14:43:35 +0200
Subject: locking, m68k: Calculate thread_info offset with asm offset

m68k has the thread_info structure embedded in its task struct.
Therefore its not possible to implement current_thread_info()
by looking at the stack pointer and do some simple calculations
like most other architectures do it.

To return the thread_info pointer for a task two defines are
used. This works until the spinlock function bodies get moved
into an own header file and CONFIG_SPINLOCK_DEBUG is turned on.
That results into this compile error:

  In file included from include/linux/spinlock.h:378,
                   from include/linux/seqlock.h:29,
                   from include/linux/time.h:8,
                   from include/linux/timex.h:56,
                   from include/linux/sched.h:54,
                   from arch/m68k/kernel/asm-offsets.c:12:
  include/linux/spinlock_api_smp.h: In function '__spin_unlock_irq':
  include/linux/spinlock_api_smp.h:371: error: 'current' undeclared (first use in this function)
  include/linux/spinlock_api_smp.h:371: error: (Each undeclared identifier is reported only once
  include/linux/spinlock_api_smp.h:371: error: for each function it appears in.)

Including asm/current.h to asm-offsets.c wouldn't help since
the definition of struct task is needed. So we end up with ugly
header file include dependencies.

To solve this calculate the offset of the thread_info structure
into the task struct in asm-offsets.h and use the offset in
task_thread_info(). This works just like it does for IA64 as
well.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Horst Hartmann <horsth@linux.vnet.ibm.com>
Cc: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: David Miller <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: <linux-arch@vger.kernel.org>
LKML-Reference: <20090831124417.329662275@de.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/m68k/include/asm/thread_info_mm.h | 11 ++++++++++-
 arch/m68k/kernel/asm-offsets.c         |  5 +++++
 2 files changed, 15 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/m68k/include/asm/thread_info_mm.h b/arch/m68k/include/asm/thread_info_mm.h
index 6ea5c33b3c5..b6da3882be9 100644
--- a/arch/m68k/include/asm/thread_info_mm.h
+++ b/arch/m68k/include/asm/thread_info_mm.h
@@ -1,6 +1,10 @@
 #ifndef _ASM_M68K_THREAD_INFO_H
 #define _ASM_M68K_THREAD_INFO_H
 
+#ifndef ASM_OFFSETS_C
+#include <asm/asm-offsets.h>
+#endif
+#include <asm/current.h>
 #include <asm/types.h>
 #include <asm/page.h>
 
@@ -31,7 +35,12 @@ struct thread_info {
 #define init_thread_info	(init_task.thread.info)
 #define init_stack		(init_thread_union.stack)
 
-#define task_thread_info(tsk)	(&(tsk)->thread.info)
+#ifdef ASM_OFFSETS_C
+#define task_thread_info(tsk)	((struct thread_info *) NULL)
+#else
+#define task_thread_info(tsk)	((struct thread_info *)((char *)tsk+TASK_TINFO))
+#endif
+
 #define task_stack_page(tsk)	((tsk)->stack)
 #define current_thread_info()	task_thread_info(current)
 
diff --git a/arch/m68k/kernel/asm-offsets.c b/arch/m68k/kernel/asm-offsets.c
index 0cffab8d244..25d6b721522 100644
--- a/arch/m68k/kernel/asm-offsets.c
+++ b/arch/m68k/kernel/asm-offsets.c
@@ -8,6 +8,8 @@
  * #defines from the assembly-language output.
  */
 
+#define ASM_OFFSETS_C
+
 #include <linux/stddef.h>
 #include <linux/sched.h>
 #include <linux/kernel_stat.h>
@@ -27,6 +29,9 @@ int main(void)
 	DEFINE(TASK_INFO, offsetof(struct task_struct, thread.info));
 	DEFINE(TASK_MM, offsetof(struct task_struct, mm));
 	DEFINE(TASK_ACTIVE_MM, offsetof(struct task_struct, active_mm));
+#ifdef CONFIG_MMU
+	DEFINE(TASK_TINFO, offsetof(struct task_struct, thread.info));
+#endif
 
 	/* offsets into the thread struct */
 	DEFINE(THREAD_KSP, offsetof(struct thread_struct, ksp));
-- 
cgit v1.2.3


From b62e180cae6bd82e246d871a1e44e03f8019d421 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Mon, 31 Aug 2009 14:43:39 +0200
Subject: locking: Inline spinlock code for all locking variants on s390

Speeds up several benchmarks in a measurable way, so inline
all spin-lock variants by default.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Horst Hartmann <horsth@linux.vnet.ibm.com>
Cc: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: David Miller <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: <linux-arch@vger.kernel.org>
LKML-Reference: <20090831124419.319518405@de.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/s390/include/asm/spinlock.h | 29 +++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)

(limited to 'arch')

diff --git a/arch/s390/include/asm/spinlock.h b/arch/s390/include/asm/spinlock.h
index c9af0d19c7a..41ce6861174 100644
--- a/arch/s390/include/asm/spinlock.h
+++ b/arch/s390/include/asm/spinlock.h
@@ -191,4 +191,33 @@ static inline int __raw_write_trylock(raw_rwlock_t *rw)
 #define _raw_read_relax(lock)	cpu_relax()
 #define _raw_write_relax(lock)	cpu_relax()
 
+#define __always_inline__spin_lock
+#define __always_inline__read_lock
+#define __always_inline__write_lock
+#define __always_inline__spin_lock_bh
+#define __always_inline__read_lock_bh
+#define __always_inline__write_lock_bh
+#define __always_inline__spin_lock_irq
+#define __always_inline__read_lock_irq
+#define __always_inline__write_lock_irq
+#define __always_inline__spin_lock_irqsave
+#define __always_inline__read_lock_irqsave
+#define __always_inline__write_lock_irqsave
+#define __always_inline__spin_trylock
+#define __always_inline__read_trylock
+#define __always_inline__write_trylock
+#define __always_inline__spin_trylock_bh
+#define __always_inline__spin_unlock
+#define __always_inline__read_unlock
+#define __always_inline__write_unlock
+#define __always_inline__spin_unlock_bh
+#define __always_inline__read_unlock_bh
+#define __always_inline__write_unlock_bh
+#define __always_inline__spin_unlock_irq
+#define __always_inline__read_unlock_irq
+#define __always_inline__write_unlock_irq
+#define __always_inline__spin_unlock_irqrestore
+#define __always_inline__read_unlock_irqrestore
+#define __always_inline__write_unlock_irqrestore
+
 #endif /* __ASM_SPINLOCK_H */
-- 
cgit v1.2.3


From 132ec92f3f70fe365c1f4b8d46e66cf8a2a16880 Mon Sep 17 00:00:00 2001
From: Borislav Petkov <petkovbb@googlemail.com>
Date: Mon, 31 Aug 2009 09:50:09 +0200
Subject: x86, msr: Add rd/wrmsr interfaces with preset registers

native_{rdmsr,wrmsr}_safe_regs are two new interfaces which allow
presetting of a subset of eight x86 GPRs before executing the rd/wrmsr
instructions. This is needed at least on AMD K8 for accessing an erratum
workaround MSR.

Originally based on an idea by H. Peter Anvin.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
LKML-Reference: <1251705011-18636-1-git-send-email-petkovbb@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/include/asm/msr.h      | 13 ++++++
 arch/x86/include/asm/paravirt.h | 16 +++++++
 arch/x86/kernel/paravirt.c      |  2 +
 arch/x86/lib/Makefile           |  1 +
 arch/x86/lib/msr-reg.S          | 98 +++++++++++++++++++++++++++++++++++++++++
 5 files changed, 130 insertions(+)
 create mode 100644 arch/x86/lib/msr-reg.S

(limited to 'arch')

diff --git a/arch/x86/include/asm/msr.h b/arch/x86/include/asm/msr.h
index 48ad9d29484..184d4a11396 100644
--- a/arch/x86/include/asm/msr.h
+++ b/arch/x86/include/asm/msr.h
@@ -113,6 +113,9 @@ notrace static inline int native_write_msr_safe(unsigned int msr,
 
 extern unsigned long long native_read_tsc(void);
 
+extern int native_rdmsr_safe_regs(u32 *regs);
+extern int native_wrmsr_safe_regs(u32 *regs);
+
 static __always_inline unsigned long long __native_read_tsc(void)
 {
 	DECLARE_ARGS(val, low, high);
@@ -189,6 +192,16 @@ static inline int rdmsrl_amd_safe(unsigned msr, unsigned long long *p)
 	return err;
 }
 
+static inline int rdmsr_safe_regs(u32 *regs)
+{
+	return native_rdmsr_safe_regs(regs);
+}
+
+static inline int wrmsr_safe_regs(u32 *regs)
+{
+	return native_wrmsr_safe_regs(regs);
+}
+
 #define rdtscl(low)						\
 	((low) = (u32)__native_read_tsc())
 
diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h
index 4fb37c8a083..1705944e037 100644
--- a/arch/x86/include/asm/paravirt.h
+++ b/arch/x86/include/asm/paravirt.h
@@ -168,7 +168,9 @@ struct pv_cpu_ops {
 	   err = 0/-EFAULT.  wrmsr returns 0/-EFAULT. */
 	u64 (*read_msr_amd)(unsigned int msr, int *err);
 	u64 (*read_msr)(unsigned int msr, int *err);
+	int (*rdmsr_regs)(u32 *regs);
 	int (*write_msr)(unsigned int msr, unsigned low, unsigned high);
+	int (*wrmsr_regs)(u32 *regs);
 
 	u64 (*read_tsc)(void);
 	u64 (*read_pmc)(int counter);
@@ -820,6 +822,12 @@ static inline u64 paravirt_read_msr(unsigned msr, int *err)
 {
 	return PVOP_CALL2(u64, pv_cpu_ops.read_msr, msr, err);
 }
+
+static inline int paravirt_rdmsr_regs(u32 *regs)
+{
+	return PVOP_CALL1(int, pv_cpu_ops.rdmsr_regs, regs);
+}
+
 static inline u64 paravirt_read_msr_amd(unsigned msr, int *err)
 {
 	return PVOP_CALL2(u64, pv_cpu_ops.read_msr_amd, msr, err);
@@ -829,6 +837,11 @@ static inline int paravirt_write_msr(unsigned msr, unsigned low, unsigned high)
 	return PVOP_CALL3(int, pv_cpu_ops.write_msr, msr, low, high);
 }
 
+static inline int paravirt_wrmsr_regs(u32 *regs)
+{
+	return PVOP_CALL1(int, pv_cpu_ops.wrmsr_regs, regs);
+}
+
 /* These should all do BUG_ON(_err), but our headers are too tangled. */
 #define rdmsr(msr, val1, val2)			\
 do {						\
@@ -862,6 +875,9 @@ do {						\
 	_err;					\
 })
 
+#define rdmsr_safe_regs(regs)	paravirt_rdmsr_regs(regs)
+#define wrmsr_safe_regs(regs)	paravirt_wrmsr_regs(regs)
+
 static inline int rdmsrl_safe(unsigned msr, unsigned long long *p)
 {
 	int err;
diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c
index 70ec9b951d7..67594af43b3 100644
--- a/arch/x86/kernel/paravirt.c
+++ b/arch/x86/kernel/paravirt.c
@@ -362,8 +362,10 @@ struct pv_cpu_ops pv_cpu_ops = {
 #endif
 	.wbinvd = native_wbinvd,
 	.read_msr = native_read_msr_safe,
+	.rdmsr_regs = native_rdmsr_safe_regs,
 	.read_msr_amd = native_read_msr_amd_safe,
 	.write_msr = native_write_msr_safe,
+	.wrmsr_regs = native_wrmsr_safe_regs,
 	.read_tsc = native_read_tsc,
 	.read_pmc = native_read_pmc,
 	.read_tscp = native_read_tscp,
diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile
index 07c31899c9c..b59c0647d80 100644
--- a/arch/x86/lib/Makefile
+++ b/arch/x86/lib/Makefile
@@ -8,6 +8,7 @@ lib-y := delay.o
 lib-y += thunk_$(BITS).o
 lib-y += usercopy_$(BITS).o getuser.o putuser.o
 lib-y += memcpy_$(BITS).o
+lib-y += msr-reg.o
 
 ifeq ($(CONFIG_X86_32),y)
         obj-y += atomic64_32.o
diff --git a/arch/x86/lib/msr-reg.S b/arch/x86/lib/msr-reg.S
new file mode 100644
index 00000000000..51f1bb3f8c7
--- /dev/null
+++ b/arch/x86/lib/msr-reg.S
@@ -0,0 +1,98 @@
+#include <linux/linkage.h>
+#include <linux/errno.h>
+#include <asm/asm.h>
+#include <asm/msr.h>
+
+#ifdef CONFIG_X86_64
+/*
+ * int native_{rdmsr,wrmsr}_safe_regs(u32 gprs[8]);
+ *
+ * reg layout: u32 gprs[eax, ecx, edx, ebx, esp, ebp, esi, edi]
+ *
+ */
+.macro op_safe_regs op:req
+ENTRY(native_\op\()_safe_regs)
+	push    %rbx
+	push    %rbp
+	push    $0              /* Return value */
+	push    %rdi
+	movl    (%rdi), %eax
+	movl    4(%rdi), %ecx
+	movl    8(%rdi), %edx
+	movl    12(%rdi), %ebx
+	movl    20(%rdi), %ebp
+	movl    24(%rdi), %esi
+	movl    28(%rdi), %edi
+1:	\op
+2:	movl    %edi, %r10d
+	pop     %rdi
+	movl    %eax, (%rdi)
+	movl    %ecx, 4(%rdi)
+	movl    %edx, 8(%rdi)
+	movl    %ebx, 12(%rdi)
+	movl    %ebp, 20(%rdi)
+	movl    %esi, 24(%rdi)
+	movl    %r10d, 28(%rdi)
+	pop     %rax
+	pop     %rbp
+	pop     %rbx
+	ret
+3:
+	movq    $-EIO, 8(%rsp)
+	jmp     2b
+	.section __ex_table,"ax"
+	.balign 4
+	.quad   1b, 3b
+	.previous
+ENDPROC(native_\op\()_safe_regs)
+.endm
+
+#else /* X86_32 */
+
+.macro op_safe_regs op:req
+ENTRY(native_\op\()_safe_regs)
+	push    %ebx
+	push    %ebp
+	push    %esi
+	push    %edi
+	push    $0              /* Return value */
+	push    %eax
+	movl    4(%eax), %ecx
+	movl    8(%eax), %edx
+	movl    12(%eax), %ebx
+	movl    20(%eax), %ebp
+	movl    24(%eax), %esi
+	movl    28(%eax), %edi
+	movl    (%eax), %eax
+1:	\op
+2:	push    %eax
+	movl    4(%esp), %eax
+	pop     (%eax)
+	addl    $4, %esp
+	movl    %ecx, 4(%eax)
+	movl    %edx, 8(%eax)
+	movl    %ebx, 12(%eax)
+	movl    %ebp, 20(%eax)
+	movl    %esi, 24(%eax)
+	movl    %edi, 28(%eax)
+	pop     %eax
+	pop     %edi
+	pop     %esi
+	pop     %ebp
+	pop     %ebx
+	ret
+3:
+	movl    $-EIO, 4(%esp)
+	jmp     2b
+	.section __ex_table,"ax"
+	.balign 4
+	.long   1b, 3b
+	.previous
+ENDPROC(native_\op\()_safe_regs)
+.endm
+
+#endif
+
+op_safe_regs rdmsr
+op_safe_regs wrmsr
+
-- 
cgit v1.2.3


From 177fed1ee8d727c39601ce9fc2299b4cb25a718e Mon Sep 17 00:00:00 2001
From: Borislav Petkov <petkovbb@googlemail.com>
Date: Mon, 31 Aug 2009 09:50:10 +0200
Subject: x86, msr: Rewrite AMD rd/wrmsr variants

Switch them to native_{rd,wr}msr_safe_regs and remove
pv_cpu_ops.read_msr_amd.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
LKML-Reference: <1251705011-18636-2-git-send-email-petkovbb@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/include/asm/msr.h      | 38 +++++++++++++++++++++-----------------
 arch/x86/include/asm/paravirt.h | 26 ++++++++++++++++++++------
 arch/x86/kernel/paravirt.c      |  1 -
 3 files changed, 41 insertions(+), 24 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/msr.h b/arch/x86/include/asm/msr.h
index 184d4a11396..09c5ca70d49 100644
--- a/arch/x86/include/asm/msr.h
+++ b/arch/x86/include/asm/msr.h
@@ -71,22 +71,6 @@ static inline unsigned long long native_read_msr_safe(unsigned int msr,
 	return EAX_EDX_VAL(val, low, high);
 }
 
-static inline unsigned long long native_read_msr_amd_safe(unsigned int msr,
-						      int *err)
-{
-	DECLARE_ARGS(val, low, high);
-
-	asm volatile("2: rdmsr ; xor %0,%0\n"
-		     "1:\n\t"
-		     ".section .fixup,\"ax\"\n\t"
-		     "3:  mov %3,%0 ; jmp 1b\n\t"
-		     ".previous\n\t"
-		     _ASM_EXTABLE(2b, 3b)
-		     : "=r" (*err), EAX_EDX_RET(val, low, high)
-		     : "c" (msr), "D" (0x9c5a203a), "i" (-EFAULT));
-	return EAX_EDX_VAL(val, low, high);
-}
-
 static inline void native_write_msr(unsigned int msr,
 				    unsigned low, unsigned high)
 {
@@ -184,14 +168,34 @@ static inline int rdmsrl_safe(unsigned msr, unsigned long long *p)
 	*p = native_read_msr_safe(msr, &err);
 	return err;
 }
+
 static inline int rdmsrl_amd_safe(unsigned msr, unsigned long long *p)
 {
+	u32 gprs[8] = { 0 };
 	int err;
 
-	*p = native_read_msr_amd_safe(msr, &err);
+	gprs[1] = msr;
+	gprs[7] = 0x9c5a203a;
+
+	err = native_rdmsr_safe_regs(gprs);
+
+	*p = gprs[0] | ((u64)gprs[2] << 32);
+
 	return err;
 }
 
+static inline int wrmsrl_amd_safe(unsigned msr, unsigned long long val)
+{
+	u32 gprs[8] = { 0 };
+
+	gprs[0] = (u32)val;
+	gprs[1] = msr;
+	gprs[2] = val >> 32;
+	gprs[7] = 0x9c5a203a;
+
+	return native_wrmsr_safe_regs(gprs);
+}
+
 static inline int rdmsr_safe_regs(u32 *regs)
 {
 	return native_rdmsr_safe_regs(regs);
diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h
index 1705944e037..11574934a99 100644
--- a/arch/x86/include/asm/paravirt.h
+++ b/arch/x86/include/asm/paravirt.h
@@ -166,7 +166,6 @@ struct pv_cpu_ops {
 
 	/* MSR, PMC and TSR operations.
 	   err = 0/-EFAULT.  wrmsr returns 0/-EFAULT. */
-	u64 (*read_msr_amd)(unsigned int msr, int *err);
 	u64 (*read_msr)(unsigned int msr, int *err);
 	int (*rdmsr_regs)(u32 *regs);
 	int (*write_msr)(unsigned int msr, unsigned low, unsigned high);
@@ -828,10 +827,6 @@ static inline int paravirt_rdmsr_regs(u32 *regs)
 	return PVOP_CALL1(int, pv_cpu_ops.rdmsr_regs, regs);
 }
 
-static inline u64 paravirt_read_msr_amd(unsigned msr, int *err)
-{
-	return PVOP_CALL2(u64, pv_cpu_ops.read_msr_amd, msr, err);
-}
 static inline int paravirt_write_msr(unsigned msr, unsigned low, unsigned high)
 {
 	return PVOP_CALL3(int, pv_cpu_ops.write_msr, msr, low, high);
@@ -887,12 +882,31 @@ static inline int rdmsrl_safe(unsigned msr, unsigned long long *p)
 }
 static inline int rdmsrl_amd_safe(unsigned msr, unsigned long long *p)
 {
+	u32 gprs[8] = { 0 };
 	int err;
 
-	*p = paravirt_read_msr_amd(msr, &err);
+	gprs[1] = msr;
+	gprs[7] = 0x9c5a203a;
+
+	err = paravirt_rdmsr_regs(gprs);
+
+	*p = gprs[0] | ((u64)gprs[2] << 32);
+
 	return err;
 }
 
+static inline int wrmsrl_amd_safe(unsigned msr, unsigned long long val)
+{
+	u32 gprs[8] = { 0 };
+
+	gprs[0] = (u32)val;
+	gprs[1] = msr;
+	gprs[2] = val >> 32;
+	gprs[7] = 0x9c5a203a;
+
+	return paravirt_wrmsr_regs(gprs);
+}
+
 static inline u64 paravirt_read_tsc(void)
 {
 	return PVOP_CALL0(u64, pv_cpu_ops.read_tsc);
diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c
index 67594af43b3..f5b0b4a01fb 100644
--- a/arch/x86/kernel/paravirt.c
+++ b/arch/x86/kernel/paravirt.c
@@ -363,7 +363,6 @@ struct pv_cpu_ops pv_cpu_ops = {
 	.wbinvd = native_wbinvd,
 	.read_msr = native_read_msr_safe,
 	.rdmsr_regs = native_rdmsr_safe_regs,
-	.read_msr_amd = native_read_msr_amd_safe,
 	.write_msr = native_write_msr_safe,
 	.wrmsr_regs = native_wrmsr_safe_regs,
 	.read_tsc = native_read_tsc,
-- 
cgit v1.2.3


From 6b0f43ddfa358dc71ad2a2d57bce5906c1c5dc1a Mon Sep 17 00:00:00 2001
From: Borislav Petkov <borislav.petkov@amd.com>
Date: Mon, 31 Aug 2009 09:50:11 +0200
Subject: x86, AMD: Disable wrongly set X86_FEATURE_LAHF_LM CPUID bit

fbd8b1819e80ac5a176d085fdddc3a34d1499318 turns off the bit for
/proc/cpuinfo. However, a proper/full fix would be to additionally
turn off the bit in the CPUID output so that future callers get
correct CPU features info.

Do that by basically reversing what the BIOS wrongfully does at boot.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
LKML-Reference: <1251705011-18636-3-git-send-email-petkovbb@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/kernel/cpu/amd.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index 63fddcd082c..0a717fc6aeb 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -404,9 +404,18 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c)
 		/*
 		 * Some BIOSes incorrectly force this feature, but only K8
 		 * revision D (model = 0x14) and later actually support it.
+		 * (AMD Erratum #110, docId: 25759).
 		 */
-		if (c->x86_model < 0x14)
+		if (c->x86_model < 0x14 && cpu_has(c, X86_FEATURE_LAHF_LM)) {
+			u64 val;
+
 			clear_cpu_cap(c, X86_FEATURE_LAHF_LM);
+			if (!rdmsrl_amd_safe(0xc001100d, &val)) {
+				val &= ~(1ULL << 32);
+				wrmsrl_amd_safe(0xc001100d, val);
+			}
+		}
+
 	}
 	if (c->x86 == 0x10 || c->x86 == 0x11)
 		set_cpu_cap(c, X86_FEATURE_REP_GOOD);
-- 
cgit v1.2.3


From fe9b4e4e40ffdabbd385cdf171cb861c2fd517c0 Mon Sep 17 00:00:00 2001
From: "H. Peter Anvin" <hpa@zytor.com>
Date: Mon, 31 Aug 2009 11:53:23 -0700
Subject: x86, asm: Add 32-bit versions of the combined CFI macros

Add 32-bit versions of the combined CFI macros, equivalent to the
64-bit ones except, obviously, operating on 32-bit stack words.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/include/asm/dwarf2.h | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/dwarf2.h b/arch/x86/include/asm/dwarf2.h
index 3afc5e87cfd..ae6253ab902 100644
--- a/arch/x86/include/asm/dwarf2.h
+++ b/arch/x86/include/asm/dwarf2.h
@@ -87,9 +87,25 @@
 	CFI_RESTORE \reg
 	.endm
 #else /*!CONFIG_X86_64*/
+	.macro pushl_cfi reg
+	pushl \reg
+	CFI_ADJUST_CFA_OFFSET 4
+	.endm
 
-	/* 32bit defenitions are missed yet */
+	.macro popl_cfi reg
+	popl \reg
+	CFI_ADJUST_CFA_OFFSET -4
+	.endm
 
+	.macro movl_cfi reg offset=0
+	movl %\reg, \offset(%esp)
+	CFI_REL_OFFSET \reg, \offset
+	.endm
+
+	.macro movl_cfi_restore offset reg
+	movl \offset(%esp), %\reg
+	CFI_RESTORE \reg
+	.endm
 #endif /*!CONFIG_X86_64*/
 #endif /*__ASSEMBLY__*/
 
-- 
cgit v1.2.3


From 709972b1f6f70535d1fddbe1243a51b90c408a1c Mon Sep 17 00:00:00 2001
From: "H. Peter Anvin" <hpa@zytor.com>
Date: Mon, 31 Aug 2009 11:57:20 -0700
Subject: x86, asm: Make _ASM_EXTABLE() usable from assembly code

We have had this convenient macro _ASM_EXTABLE() to generate exception
table entry in inline assembly.  Make it also usable for pure
assembly.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/include/asm/asm.h | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/asm.h b/arch/x86/include/asm/asm.h
index 56be78f582f..b3ed1e1460f 100644
--- a/arch/x86/include/asm/asm.h
+++ b/arch/x86/include/asm/asm.h
@@ -3,7 +3,7 @@
 
 #ifdef __ASSEMBLY__
 # define __ASM_FORM(x)	x
-# define __ASM_EX_SEC	.section __ex_table
+# define __ASM_EX_SEC	.section __ex_table, "a"
 #else
 # define __ASM_FORM(x)	" " #x " "
 # define __ASM_EX_SEC	" .section __ex_table,\"a\"\n"
@@ -38,10 +38,18 @@
 #define _ASM_DI		__ASM_REG(di)
 
 /* Exception table entry */
+#ifdef __ASSEMBLY__
+# define _ASM_EXTABLE(from,to)	    \
+	__ASM_EX_SEC ;		    \
+	_ASM_ALIGN ;		    \
+	_ASM_PTR from , to ;	    \
+	.previous
+#else
 # define _ASM_EXTABLE(from,to) \
 	__ASM_EX_SEC	\
 	_ASM_ALIGN "\n" \
 	_ASM_PTR #from "," #to "\n" \
 	" .previous\n"
+#endif
 
 #endif /* _ASM_X86_ASM_H */
-- 
cgit v1.2.3


From 79c5dca3619d6ae15815eec14cd7a43db5f38b47 Mon Sep 17 00:00:00 2001
From: "H. Peter Anvin" <hpa@zytor.com>
Date: Mon, 31 Aug 2009 13:59:53 -0700
Subject: x86, msr: CFI annotations, cleanups for msr-reg.S

Add CFI annotations for native_{rd,wr}msr_safe_regs().
Simplify the 64-bit implementation: we don't allow the upper half
registers to be set, and so we can use them to carry state across the
operation.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Borislav Petkov <petkovbb@gmail.com>
LKML-Reference: <1251705011-18636-1-git-send-email-petkovbb@gmail.com>
---
 arch/x86/lib/msr-reg.S | 80 ++++++++++++++++++++++++++------------------------
 1 file changed, 42 insertions(+), 38 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/lib/msr-reg.S b/arch/x86/lib/msr-reg.S
index 51f1bb3f8c7..9e8cdcf5d73 100644
--- a/arch/x86/lib/msr-reg.S
+++ b/arch/x86/lib/msr-reg.S
@@ -1,5 +1,6 @@
 #include <linux/linkage.h>
 #include <linux/errno.h>
+#include <asm/dwarf2.h>
 #include <asm/asm.h>
 #include <asm/msr.h>
 
@@ -12,10 +13,11 @@
  */
 .macro op_safe_regs op:req
 ENTRY(native_\op\()_safe_regs)
-	push    %rbx
-	push    %rbp
-	push    $0              /* Return value */
-	push    %rdi
+	CFI_STARTPROC
+	pushq_cfi %rbx
+	pushq_cfi %rbp
+	movq	%rdi, %r10	/* Save pointer */
+	xorl	%r11d, %r11d	/* Return value */
 	movl    (%rdi), %eax
 	movl    4(%rdi), %ecx
 	movl    8(%rdi), %edx
@@ -23,27 +25,26 @@ ENTRY(native_\op\()_safe_regs)
 	movl    20(%rdi), %ebp
 	movl    24(%rdi), %esi
 	movl    28(%rdi), %edi
+	CFI_REMEMBER_STATE
 1:	\op
-2:	movl    %edi, %r10d
-	pop     %rdi
-	movl    %eax, (%rdi)
-	movl    %ecx, 4(%rdi)
-	movl    %edx, 8(%rdi)
-	movl    %ebx, 12(%rdi)
-	movl    %ebp, 20(%rdi)
-	movl    %esi, 24(%rdi)
-	movl    %r10d, 28(%rdi)
-	pop     %rax
-	pop     %rbp
-	pop     %rbx
+2:	movl    %eax, (%r10)
+	movl	%r11d, %eax	/* Return value */
+	movl    %ecx, 4(%r10)
+	movl    %edx, 8(%r10)
+	movl    %ebx, 12(%r10)
+	movl    %ebp, 20(%r10)
+	movl    %esi, 24(%r10)
+	movl    %edi, 28(%r10)
+	popq_cfi %rbp
+	popq_cfi %rbx
 	ret
 3:
-	movq    $-EIO, 8(%rsp)
+	CFI_RESTORE_STATE
+	movl    $-EIO, %r11d
 	jmp     2b
-	.section __ex_table,"ax"
-	.balign 4
-	.quad   1b, 3b
-	.previous
+
+	_ASM_EXTABLE(1b, 3b)
+	CFI_ENDPROC
 ENDPROC(native_\op\()_safe_regs)
 .endm
 
@@ -51,12 +52,13 @@ ENDPROC(native_\op\()_safe_regs)
 
 .macro op_safe_regs op:req
 ENTRY(native_\op\()_safe_regs)
-	push    %ebx
-	push    %ebp
-	push    %esi
-	push    %edi
-	push    $0              /* Return value */
-	push    %eax
+	CFI_STARTPROC
+	pushl_cfi %ebx
+	pushl_cfi %ebp
+	pushl_cfi %esi
+	pushl_cfi %edi
+	pushl_cfi $0              /* Return value */
+	pushl_cfi %eax
 	movl    4(%eax), %ecx
 	movl    8(%eax), %edx
 	movl    12(%eax), %ebx
@@ -64,30 +66,32 @@ ENTRY(native_\op\()_safe_regs)
 	movl    24(%eax), %esi
 	movl    28(%eax), %edi
 	movl    (%eax), %eax
+	CFI_REMEMBER_STATE
 1:	\op
-2:	push    %eax
+2:	pushl_cfi %eax
 	movl    4(%esp), %eax
-	pop     (%eax)
+	popl_cfi (%eax)
 	addl    $4, %esp
+	CFI_ADJUST_CFA_OFFSET -4
 	movl    %ecx, 4(%eax)
 	movl    %edx, 8(%eax)
 	movl    %ebx, 12(%eax)
 	movl    %ebp, 20(%eax)
 	movl    %esi, 24(%eax)
 	movl    %edi, 28(%eax)
-	pop     %eax
-	pop     %edi
-	pop     %esi
-	pop     %ebp
-	pop     %ebx
+	popl_cfi %eax
+	popl_cfi %edi
+	popl_cfi %esi
+	popl_cfi %ebp
+	popl_cfi %ebx
 	ret
 3:
+	CFI_RESTORE_STATE
 	movl    $-EIO, 4(%esp)
 	jmp     2b
-	.section __ex_table,"ax"
-	.balign 4
-	.long   1b, 3b
-	.previous
+
+	_ASM_EXTABLE(1b, 3b)
+	CFI_ENDPROC
 ENDPROC(native_\op\()_safe_regs)
 .endm
 
-- 
cgit v1.2.3


From 0cc0213e73af5963eca259c84876937c20689dbd Mon Sep 17 00:00:00 2001
From: "H. Peter Anvin" <hpa@zytor.com>
Date: Mon, 31 Aug 2009 14:23:29 -0700
Subject: x86, msr: Have the _safe MSR functions return -EIO, not -EFAULT

For some reason, the _safe MSR functions returned -EFAULT, not -EIO.
However, the only user which cares about the return code as anything
other than a boolean is the MSR driver, which wants -EIO.  Change it
to -EIO across the board.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Chris Wright <chrisw@sous-sol.org>
Cc: Alok Kataria <akataria@vmware.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
---
 arch/x86/include/asm/msr.h |  4 ++--
 arch/x86/kernel/msr.c      | 10 ++--------
 arch/x86/xen/enlighten.c   |  2 +-
 3 files changed, 5 insertions(+), 11 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/msr.h b/arch/x86/include/asm/msr.h
index 09c5ca70d49..943fdd572e1 100644
--- a/arch/x86/include/asm/msr.h
+++ b/arch/x86/include/asm/msr.h
@@ -67,7 +67,7 @@ static inline unsigned long long native_read_msr_safe(unsigned int msr,
 		     ".previous\n\t"
 		     _ASM_EXTABLE(2b, 3b)
 		     : [err] "=r" (*err), EAX_EDX_RET(val, low, high)
-		     : "c" (msr), [fault] "i" (-EFAULT));
+		     : "c" (msr), [fault] "i" (-EIO));
 	return EAX_EDX_VAL(val, low, high);
 }
 
@@ -90,7 +90,7 @@ notrace static inline int native_write_msr_safe(unsigned int msr,
 		     _ASM_EXTABLE(2b, 3b)
 		     : [err] "=a" (err)
 		     : "c" (msr), "0" (low), "d" (high),
-		       [fault] "i" (-EFAULT)
+		       [fault] "i" (-EIO)
 		     : "memory");
 	return err;
 }
diff --git a/arch/x86/kernel/msr.c b/arch/x86/kernel/msr.c
index 98fd6cd4e3a..2cfbb4b2c42 100644
--- a/arch/x86/kernel/msr.c
+++ b/arch/x86/kernel/msr.c
@@ -80,11 +80,8 @@ static ssize_t msr_read(struct file *file, char __user *buf,
 
 	for (; count; count -= 8) {
 		err = rdmsr_safe_on_cpu(cpu, reg, &data[0], &data[1]);
-		if (err) {
-			if (err == -EFAULT) /* Fix idiotic error code */
-				err = -EIO;
+		if (err)
 			break;
-		}
 		if (copy_to_user(tmp, &data, 8)) {
 			err = -EFAULT;
 			break;
@@ -115,11 +112,8 @@ static ssize_t msr_write(struct file *file, const char __user *buf,
 			break;
 		}
 		err = wrmsr_safe_on_cpu(cpu, reg, data[0], data[1]);
-		if (err) {
-			if (err == -EFAULT) /* Fix idiotic error code */
-				err = -EIO;
+		if (err)
 			break;
-		}
 		tmp += 2;
 		bytes += 8;
 	}
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index 0a1700a2be9..a8432d81690 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -713,7 +713,7 @@ static int xen_write_msr_safe(unsigned int msr, unsigned low, unsigned high)
 	set:
 		base = ((u64)high << 32) | low;
 		if (HYPERVISOR_set_segment_base(which, base) != 0)
-			ret = -EFAULT;
+			ret = -EIO;
 		break;
 #endif
 
-- 
cgit v1.2.3


From 8b956bf1f0f2b552ed93cf6cafe823edff298b3b Mon Sep 17 00:00:00 2001
From: "H. Peter Anvin" <hpa@zytor.com>
Date: Mon, 31 Aug 2009 14:13:48 -0700
Subject: x86, msr: Create _on_cpu helpers for {rw,wr}msr_safe_regs()

Create _on_cpu helpers for {rw,wr}msr_safe_regs() analogously with the
other MSR functions.  This will be necessary to add support for these
to the MSR driver.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Borislav Petkov <petkovbb@gmail.com>
---
 arch/x86/include/asm/msr.h | 18 +++++++++++++----
 arch/x86/lib/msr.c         | 49 ++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 63 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/msr.h b/arch/x86/include/asm/msr.h
index 943fdd572e1..8e56712aa17 100644
--- a/arch/x86/include/asm/msr.h
+++ b/arch/x86/include/asm/msr.h
@@ -97,8 +97,8 @@ notrace static inline int native_write_msr_safe(unsigned int msr,
 
 extern unsigned long long native_read_tsc(void);
 
-extern int native_rdmsr_safe_regs(u32 *regs);
-extern int native_wrmsr_safe_regs(u32 *regs);
+extern int native_rdmsr_safe_regs(u32 regs[8]);
+extern int native_wrmsr_safe_regs(u32 regs[8]);
 
 static __always_inline unsigned long long __native_read_tsc(void)
 {
@@ -196,12 +196,12 @@ static inline int wrmsrl_amd_safe(unsigned msr, unsigned long long val)
 	return native_wrmsr_safe_regs(gprs);
 }
 
-static inline int rdmsr_safe_regs(u32 *regs)
+static inline int rdmsr_safe_regs(u32 regs[8])
 {
 	return native_rdmsr_safe_regs(regs);
 }
 
-static inline int wrmsr_safe_regs(u32 *regs)
+static inline int wrmsr_safe_regs(u32 regs[8])
 {
 	return native_wrmsr_safe_regs(regs);
 }
@@ -245,6 +245,8 @@ void rdmsr_on_cpus(const cpumask_t *mask, u32 msr_no, struct msr *msrs);
 void wrmsr_on_cpus(const cpumask_t *mask, u32 msr_no, struct msr *msrs);
 int rdmsr_safe_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h);
 int wrmsr_safe_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h);
+int rdmsr_safe_regs_on_cpu(unsigned int cpu, u32 regs[8]);
+int wrmsr_safe_regs_on_cpu(unsigned int cpu, u32 regs[8]);
 #else  /*  CONFIG_SMP  */
 static inline int rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h)
 {
@@ -275,6 +277,14 @@ static inline int wrmsr_safe_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h)
 {
 	return wrmsr_safe(msr_no, l, h);
 }
+static inline int rdmsr_safe_regs_on_cpu(unsigned int cpu, u32 regs[8])
+{
+	return rdmsr_safe_regs(regs);
+}
+static inline int wrmsr_safe_regs_on_cpu(unsigned int cpu, u32 regs[8])
+{
+	return wrmsr_safe_regs(regs);
+}
 #endif  /* CONFIG_SMP */
 #endif /* __ASSEMBLY__ */
 #endif /* __KERNEL__ */
diff --git a/arch/x86/lib/msr.c b/arch/x86/lib/msr.c
index caa24aca811..33a1e3ca22d 100644
--- a/arch/x86/lib/msr.c
+++ b/arch/x86/lib/msr.c
@@ -175,3 +175,52 @@ int wrmsr_safe_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h)
 	return err ? err : rv.err;
 }
 EXPORT_SYMBOL(wrmsr_safe_on_cpu);
+
+/*
+ * These variants are significantly slower, but allows control over
+ * the entire 32-bit GPR set.
+ */
+struct msr_regs_info {
+	u32 *regs;
+	int err;
+};
+
+static void __rdmsr_safe_regs_on_cpu(void *info)
+{
+	struct msr_regs_info *rv = info;
+
+	rv->err = rdmsr_safe_regs(rv->regs);
+}
+
+static void __wrmsr_safe_regs_on_cpu(void *info)
+{
+	struct msr_regs_info *rv = info;
+
+	rv->err = wrmsr_safe_regs(rv->regs);
+}
+
+int rdmsr_safe_regs_on_cpu(unsigned int cpu, u32 *regs)
+{
+	int err;
+	struct msr_regs_info rv;
+
+	rv.regs   = regs;
+	rv.err    = -EIO;
+	err = smp_call_function_single(cpu, __rdmsr_safe_regs_on_cpu, &rv, 1);
+
+	return err ? err : rv.err;
+}
+EXPORT_SYMBOL(rdmsr_safe_regs_on_cpu);
+
+int wrmsr_safe_regs_on_cpu(unsigned int cpu, u32 *regs)
+{
+	int err;
+	struct msr_regs_info rv;
+
+	rv.regs = regs;
+	rv.err  = -EIO;
+	err = smp_call_function_single(cpu, __wrmsr_safe_regs_on_cpu, &rv, 1);
+
+	return err ? err : rv.err;
+}
+EXPORT_SYMBOL(wrmsr_safe_regs_on_cpu);
-- 
cgit v1.2.3


From ff55df53dfdd338906c8ba9d1f4a759b86b869d5 Mon Sep 17 00:00:00 2001
From: "H. Peter Anvin" <hpa@zytor.com>
Date: Mon, 31 Aug 2009 14:16:57 -0700
Subject: x86, msr: Export the register-setting MSR functions via /dev/*/msr

Make it possible to access the all-register-setting/getting MSR
functions via the MSR driver.  This is implemented as an ioctl() on
the standard MSR device node.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Borislav Petkov <petkovbb@gmail.com>
---
 arch/x86/include/asm/msr.h | 10 +++++++--
 arch/x86/kernel/msr.c      | 51 ++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 59 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/msr.h b/arch/x86/include/asm/msr.h
index 8e56712aa17..7e2b6ba962f 100644
--- a/arch/x86/include/asm/msr.h
+++ b/arch/x86/include/asm/msr.h
@@ -3,10 +3,16 @@
 
 #include <asm/msr-index.h>
 
-#ifdef __KERNEL__
 #ifndef __ASSEMBLY__
 
 #include <linux/types.h>
+#include <linux/ioctl.h>
+
+#define X86_IOC_RDMSR_REGS	_IOWR('c', 0xA0, __u32[8])
+#define X86_IOC_WRMSR_REGS	_IOWR('c', 0xA1, __u32[8])
+
+#ifdef __KERNEL__
+
 #include <asm/asm.h>
 #include <asm/errno.h>
 #include <asm/cpumask.h>
@@ -286,6 +292,6 @@ static inline int wrmsr_safe_regs_on_cpu(unsigned int cpu, u32 regs[8])
 	return wrmsr_safe_regs(regs);
 }
 #endif  /* CONFIG_SMP */
-#endif /* __ASSEMBLY__ */
 #endif /* __KERNEL__ */
+#endif /* __ASSEMBLY__ */
 #endif /* _ASM_X86_MSR_H */
diff --git a/arch/x86/kernel/msr.c b/arch/x86/kernel/msr.c
index 2cfbb4b2c42..7dd95009417 100644
--- a/arch/x86/kernel/msr.c
+++ b/arch/x86/kernel/msr.c
@@ -1,6 +1,7 @@
 /* ----------------------------------------------------------------------- *
  *
  *   Copyright 2000-2008 H. Peter Anvin - All Rights Reserved
+ *   Copyright 2009 Intel Corporation; author: H. Peter Anvin
  *
  *   This program is free software; you can redistribute it and/or modify
  *   it under the terms of the GNU General Public License as published by
@@ -121,6 +122,54 @@ static ssize_t msr_write(struct file *file, const char __user *buf,
 	return bytes ? bytes : err;
 }
 
+static long msr_ioctl(struct file *file, unsigned int ioc, unsigned long arg)
+{
+	u32 __user *uregs = (u32 __user *)arg;
+	u32 regs[8];
+	int cpu = iminor(file->f_path.dentry->d_inode);
+	int err;
+
+	switch (ioc) {
+	case X86_IOC_RDMSR_REGS:
+		if (!(file->f_mode & FMODE_READ)) {
+			err = -EBADF;
+			break;
+		}
+		if (copy_from_user(&regs, uregs, sizeof regs)) {
+			err = -EFAULT;
+			break;
+		}
+		err = rdmsr_safe_regs_on_cpu(cpu, regs);
+		if (err)
+			break;
+		if (copy_to_user(uregs, &regs, sizeof regs))
+			err = -EFAULT;
+		break;
+
+	case X86_IOC_WRMSR_REGS:
+		if (!(file->f_mode & FMODE_WRITE)) {
+			err = -EBADF;
+			break;
+		}
+		if (copy_from_user(&regs, uregs, sizeof regs)) {
+			err = -EFAULT;
+			break;
+		}
+		err = wrmsr_safe_regs_on_cpu(cpu, regs);
+		if (err)
+			break;
+		if (copy_to_user(uregs, &regs, sizeof regs))
+			err = -EFAULT;
+		break;
+
+	default:
+		err = -ENOTTY;
+		break;
+	}
+
+	return err;
+}
+
 static int msr_open(struct inode *inode, struct file *file)
 {
 	unsigned int cpu = iminor(file->f_path.dentry->d_inode);
@@ -151,6 +200,8 @@ static const struct file_operations msr_fops = {
 	.read = msr_read,
 	.write = msr_write,
 	.open = msr_open,
+	.unlocked_ioctl = msr_ioctl,
+	.compat_ioctl = msr_ioctl,
 };
 
 static int __cpuinit msr_device_create(int cpu)
-- 
cgit v1.2.3


From 96910b6dc8a4fdb75e69f09f47b62d41743d36ba Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Mon, 31 Aug 2009 14:43:34 +0200
Subject: locking, m68k/asm-offsets: Rename signal defines

In order to be able to use asm-offsets.h in C files the
existing namespace conflicts must be solved first. In
asm-offsets.h there are defines for signal constants, so they
can be used in assembler files.

Unfortunately the existing defines use a 1:1 mapping for the
macro names which results in name space conflicts if the header
file would also be used in C files. So rename the created
defines and add an "L" prefix to each one since that has
already been done for the SIGTRAP define in entry_mm.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Horst Hartmann <horsth@linux.vnet.ibm.com>
Cc: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: David Miller <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: <linux-arch@vger.kernel.org>
LKML-Reference: <20090831124416.998821502@de.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/m68k/include/asm/entry_mm.h | 1 -
 arch/m68k/kernel/asm-offsets.c   | 8 ++++----
 arch/m68k/math-emu/fp_entry.S    | 8 ++++----
 3 files changed, 8 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/m68k/include/asm/entry_mm.h b/arch/m68k/include/asm/entry_mm.h
index 4fcfc28c061..47412588621 100644
--- a/arch/m68k/include/asm/entry_mm.h
+++ b/arch/m68k/include/asm/entry_mm.h
@@ -46,7 +46,6 @@
 #define curptr a2
 
 LFLUSH_I_AND_D = 0x00000808
-LSIGTRAP = 5
 
 /* process bits for task_struct.ptrace */
 PT_TRACESYS_OFF = 3
diff --git a/arch/m68k/kernel/asm-offsets.c b/arch/m68k/kernel/asm-offsets.c
index 25d6b721522..73e5e581245 100644
--- a/arch/m68k/kernel/asm-offsets.c
+++ b/arch/m68k/kernel/asm-offsets.c
@@ -89,10 +89,10 @@ int main(void)
 	DEFINE(FONT_DESC_PREF, offsetof(struct font_desc, pref));
 
 	/* signal defines */
-	DEFINE(SIGSEGV, SIGSEGV);
-	DEFINE(SEGV_MAPERR, SEGV_MAPERR);
-	DEFINE(SIGTRAP, SIGTRAP);
-	DEFINE(TRAP_TRACE, TRAP_TRACE);
+	DEFINE(LSIGSEGV, SIGSEGV);
+	DEFINE(LSEGV_MAPERR, SEGV_MAPERR);
+	DEFINE(LSIGTRAP, SIGTRAP);
+	DEFINE(LTRAP_TRACE, TRAP_TRACE);
 
 	/* offsets into the custom struct */
 	DEFINE(CUSTOMBASE, &amiga_custom);
diff --git a/arch/m68k/math-emu/fp_entry.S b/arch/m68k/math-emu/fp_entry.S
index 916c6f3d1f0..a3fe1f348df 100644
--- a/arch/m68k/math-emu/fp_entry.S
+++ b/arch/m68k/math-emu/fp_entry.S
@@ -85,8 +85,8 @@ fp_err_ua2:
 fp_err_ua1:
 	addq.l	#4,%sp
 	move.l	%a0,-(%sp)
-	pea	SEGV_MAPERR
-	pea	SIGSEGV
+	pea	LSEGV_MAPERR
+	pea	LSIGSEGV
 	jsr	fpemu_signal
 	add.w	#12,%sp
 	jra	ret_from_exception
@@ -96,8 +96,8 @@ fp_err_ua1:
 	| it does not really belong here, but...
 fp_sendtrace060:
 	move.l	(FPS_PC,%sp),-(%sp)
-	pea	TRAP_TRACE
-	pea	SIGTRAP
+	pea	LTRAP_TRACE
+	pea	LSIGTRAP
 	jsr	fpemu_signal
 	add.w	#12,%sp
 	jra	ret_from_exception
-- 
cgit v1.2.3


From acde31dc467797ccae3a55b791a77af446cce018 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Thu, 27 Aug 2009 14:29:20 +0100
Subject: kmemleak: Ignore the aperture memory hole on x86_64

This block is allocated with alloc_bootmem() and scanned by kmemleak but
the kernel direct mapping may no longer exist. This patch tells kmemleak
to ignore this memory hole. The dma32_bootmem_ptr in
dma32_reserve_bootmem() is also ignored.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/aperture_64.c | 6 ++++++
 arch/x86/kernel/pci-dma.c     | 6 ++++++
 2 files changed, 12 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c
index 676debfc170..128111d8ffe 100644
--- a/arch/x86/kernel/aperture_64.c
+++ b/arch/x86/kernel/aperture_64.c
@@ -20,6 +20,7 @@
 #include <linux/bitops.h>
 #include <linux/ioport.h>
 #include <linux/suspend.h>
+#include <linux/kmemleak.h>
 #include <asm/e820.h>
 #include <asm/io.h>
 #include <asm/iommu.h>
@@ -94,6 +95,11 @@ static u32 __init allocate_aperture(void)
 	 * code for safe
 	 */
 	p = __alloc_bootmem_nopanic(aper_size, aper_size, 512ULL<<20);
+	/*
+	 * Kmemleak should not scan this block as it may not be mapped via the
+	 * kernel direct mapping.
+	 */
+	kmemleak_ignore(p);
 	if (!p || __pa(p)+aper_size > 0xffffffff) {
 		printk(KERN_ERR
 			"Cannot allocate aperture memory hole (%p,%uK)\n",
diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c
index 1a041bcf506..fa80f60e960 100644
--- a/arch/x86/kernel/pci-dma.c
+++ b/arch/x86/kernel/pci-dma.c
@@ -3,6 +3,7 @@
 #include <linux/dmar.h>
 #include <linux/bootmem.h>
 #include <linux/pci.h>
+#include <linux/kmemleak.h>
 
 #include <asm/proto.h>
 #include <asm/dma.h>
@@ -88,6 +89,11 @@ void __init dma32_reserve_bootmem(void)
 	size = roundup(dma32_bootmem_size, align);
 	dma32_bootmem_ptr = __alloc_bootmem_nopanic(size, align,
 				 512ULL<<20);
+	/*
+	 * Kmemleak should not scan this block as it may not be mapped via the
+	 * kernel direct mapping.
+	 */
+	kmemleak_ignore(dma32_bootmem_ptr);
 	if (dma32_bootmem_ptr)
 		dma32_bootmem_size = size;
 	else
-- 
cgit v1.2.3


From f6909f394c2d4a0a71320797df72d54c49c5927e Mon Sep 17 00:00:00 2001
From: "H. Peter Anvin" <hpa@zytor.com>
Date: Tue, 1 Sep 2009 13:31:52 -0700
Subject: x86, msr: fix msr-reg.S compilation with gas 2.16.1

msr-reg.S used the :req option on a macro argument, which wasn't
supported by gas 2.16.1 (but apparently by some earlier versions of
gas, just to be confusing.)  It isn't necessary, so just remove it.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Borislav Petkov <petkovbb@googlemail.com>
---
 arch/x86/lib/msr-reg.S | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/lib/msr-reg.S b/arch/x86/lib/msr-reg.S
index 9e8cdcf5d73..d5eaf53aa67 100644
--- a/arch/x86/lib/msr-reg.S
+++ b/arch/x86/lib/msr-reg.S
@@ -11,7 +11,7 @@
  * reg layout: u32 gprs[eax, ecx, edx, ebx, esp, ebp, esi, edi]
  *
  */
-.macro op_safe_regs op:req
+.macro op_safe_regs op
 ENTRY(native_\op\()_safe_regs)
 	CFI_STARTPROC
 	pushq_cfi %rbx
-- 
cgit v1.2.3


From e7a088f935180b90cfe6ab0aaae8a556f46885fe Mon Sep 17 00:00:00 2001
From: Alexey Dobriyan <adobriyan@gmail.com>
Date: Tue, 1 Sep 2009 17:54:07 -0700
Subject: sparc: convert /proc/io_map, /proc/dvma_map to seq_file

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/kernel/ioport.c | 32 ++++++++++++++++++++------------
 1 file changed, 20 insertions(+), 12 deletions(-)

(limited to 'arch')

diff --git a/arch/sparc/kernel/ioport.c b/arch/sparc/kernel/ioport.c
index 87ea0d03d97..e71ce79d8c1 100644
--- a/arch/sparc/kernel/ioport.c
+++ b/arch/sparc/kernel/ioport.c
@@ -35,6 +35,7 @@
 #include <linux/slab.h>
 #include <linux/pci.h>		/* struct pci_dev */
 #include <linux/proc_fs.h>
+#include <linux/seq_file.h>
 #include <linux/scatterlist.h>
 #include <linux/of_device.h>
 
@@ -663,26 +664,33 @@ EXPORT_SYMBOL(pci_dma_sync_sg_for_device);
 
 #ifdef CONFIG_PROC_FS
 
-static int
-_sparc_io_get_info(char *buf, char **start, off_t fpos, int length, int *eof,
-    void *data)
+static int sparc_io_proc_show(struct seq_file *m, void *v)
 {
-	char *p = buf, *e = buf + length;
-	struct resource *r;
+	struct resource *root = m->private, *r;
 	const char *nm;
 
-	for (r = ((struct resource *)data)->child; r != NULL; r = r->sibling) {
-		if (p + 32 >= e)	/* Better than nothing */
-			break;
+	for (r = root->child; r != NULL; r = r->sibling) {
 		if ((nm = r->name) == 0) nm = "???";
-		p += sprintf(p, "%016llx-%016llx: %s\n",
+		seq_printf(m, "%016llx-%016llx: %s\n",
 				(unsigned long long)r->start,
 				(unsigned long long)r->end, nm);
 	}
 
-	return p-buf;
+	return 0;
 }
 
+static int sparc_io_proc_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, sparc_io_proc_show, PDE(inode)->data);
+}
+
+static const struct file_operations sparc_io_proc_fops = {
+	.owner		= THIS_MODULE,
+	.open		= sparc_io_proc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
 #endif /* CONFIG_PROC_FS */
 
 /*
@@ -707,7 +715,7 @@ static struct resource *_sparc_find_resource(struct resource *root,
 static void register_proc_sparc_ioport(void)
 {
 #ifdef CONFIG_PROC_FS
-	create_proc_read_entry("io_map",0,NULL,_sparc_io_get_info,&sparc_iomap);
-	create_proc_read_entry("dvma_map",0,NULL,_sparc_io_get_info,&_sparc_dvma);
+	proc_create_data("io_map", 0, NULL, &sparc_io_proc_fops, &sparc_iomap);
+	proc_create_data("dvma_map", 0, NULL, &sparc_io_proc_fops, &_sparc_dvma);
 #endif
 }
-- 
cgit v1.2.3


From 69575d388603365f2afbf4166df93152df59b165 Mon Sep 17 00:00:00 2001
From: Shane Wang <shane.wang@intel.com>
Date: Tue, 1 Sep 2009 18:25:07 -0700
Subject: x86, intel_txt: clean up the impact on generic code, unbreak non-x86

Move tboot.h from asm to linux to fix the build errors of intel_txt
patch on non-X86 platforms. Remove the tboot code from generic code
init/main.c and kernel/cpu.c.

Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/Kconfig             |   4 +
 arch/x86/include/asm/tboot.h | 197 -------------------------------------------
 arch/x86/kernel/reboot.c     |   3 +-
 arch/x86/kernel/setup.c      |   3 +-
 arch/x86/kernel/smpboot.c    |   2 +-
 arch/x86/kernel/tboot.c      |  58 ++++++++++---
 6 files changed, 54 insertions(+), 213 deletions(-)
 delete mode 100644 arch/x86/include/asm/tboot.h

(limited to 'arch')

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 738bdc6b0f8..b66f2102c35 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -178,6 +178,10 @@ config ARCH_SUPPORTS_OPTIMIZED_INLINING
 config ARCH_SUPPORTS_DEBUG_PAGEALLOC
 	def_bool y
 
+config HAVE_INTEL_TXT
+	def_bool y
+	depends on EXPERIMENTAL && DMAR && ACPI
+
 # Use the generic interrupt handling code in kernel/irq/:
 config GENERIC_HARDIRQS
 	bool
diff --git a/arch/x86/include/asm/tboot.h b/arch/x86/include/asm/tboot.h
deleted file mode 100644
index b13929d4e5f..00000000000
--- a/arch/x86/include/asm/tboot.h
+++ /dev/null
@@ -1,197 +0,0 @@
-/*
- * tboot.h: shared data structure with tboot and kernel and functions
- *          used by kernel for runtime support of Intel(R) Trusted
- *          Execution Technology
- *
- * Copyright (c) 2006-2009, Intel Corporation
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- */
-
-#ifndef _ASM_TBOOT_H
-#define _ASM_TBOOT_H
-
-#include <acpi/acpi.h>
-
-/* these must have the values from 0-5 in this order */
-enum {
-	TB_SHUTDOWN_REBOOT = 0,
-	TB_SHUTDOWN_S5,
-	TB_SHUTDOWN_S4,
-	TB_SHUTDOWN_S3,
-	TB_SHUTDOWN_HALT,
-	TB_SHUTDOWN_WFS
-};
-
-#ifdef CONFIG_INTEL_TXT
-
-/* used to communicate between tboot and the launched kernel */
-
-#define TB_KEY_SIZE             64   /* 512 bits */
-
-#define MAX_TB_MAC_REGIONS      32
-
-struct tboot_mac_region {
-	u64  start;         /* must be 64 byte -aligned */
-	u32  size;          /* must be 64 byte -granular */
-} __packed;
-
-/* GAS - Generic Address Structure (ACPI 2.0+) */
-struct tboot_acpi_generic_address {
-	u8  space_id;
-	u8  bit_width;
-	u8  bit_offset;
-	u8  access_width;
-	u64 address;
-} __packed;
-
-/*
- * combines Sx info from FADT and FACS tables per ACPI 2.0+ spec
- * (http://www.acpi.info/)
- */
-struct tboot_acpi_sleep_info {
-	struct tboot_acpi_generic_address pm1a_cnt_blk;
-	struct tboot_acpi_generic_address pm1b_cnt_blk;
-	struct tboot_acpi_generic_address pm1a_evt_blk;
-	struct tboot_acpi_generic_address pm1b_evt_blk;
-	u16 pm1a_cnt_val;
-	u16 pm1b_cnt_val;
-	u64 wakeup_vector;
-	u32 vector_width;
-	u64 kernel_s3_resume_vector;
-} __packed;
-
-/*
- * shared memory page used for communication between tboot and kernel
- */
-struct tboot {
-	/*
-	 * version 3+ fields:
-	 */
-
-	/* TBOOT_UUID */
-	u8 uuid[16];
-
-	/* version number: 5 is current */
-	u32 version;
-
-	/* physical addr of tb_log_t log */
-	u32 log_addr;
-
-	/*
-	 * physical addr of entry point for tboot shutdown and
-	 * type of shutdown (TB_SHUTDOWN_*) being requested
-	 */
-	u32 shutdown_entry;
-	u32 shutdown_type;
-
-	/* kernel-specified ACPI info for Sx shutdown */
-	struct tboot_acpi_sleep_info acpi_sinfo;
-
-	/* tboot location in memory (physical) */
-	u32 tboot_base;
-	u32 tboot_size;
-
-	/* memory regions (phys addrs) for tboot to MAC on S3 */
-	u8 num_mac_regions;
-	struct tboot_mac_region mac_regions[MAX_TB_MAC_REGIONS];
-
-
-	/*
-	 * version 4+ fields:
-	 */
-
-	/* symmetric key for use by kernel; will be encrypted on S3 */
-	u8 s3_key[TB_KEY_SIZE];
-
-
-	/*
-	 * version 5+ fields:
-	 */
-
-	/* used to 4byte-align num_in_wfs */
-	u8 reserved_align[3];
-
-	/* number of processors in wait-for-SIPI */
-	u32 num_in_wfs;
-} __packed;
-
-/*
- * UUID for tboot data struct to facilitate matching
- * defined as {663C8DFF-E8B3-4b82-AABF-19EA4D057A08} by tboot, which is
- * represented as {} in the char array used here
- */
-#define TBOOT_UUID	{0xff, 0x8d, 0x3c, 0x66, 0xb3, 0xe8, 0x82, 0x4b, 0xbf,\
-			 0xaa, 0x19, 0xea, 0x4d, 0x5, 0x7a, 0x8}
-
-extern struct tboot *tboot;
-
-static inline int tboot_enabled(void)
-{
-	return tboot != NULL;
-}
-
-extern void tboot_probe(void);
-extern void tboot_create_trampoline(void);
-extern void tboot_shutdown(u32 shutdown_type);
-extern void tboot_sleep(u8 sleep_state, u32 pm1a_control, u32 pm1b_control);
-extern int tboot_wait_for_aps(int num_aps);
-extern struct acpi_table_header *tboot_get_dmar_table(
-				      struct acpi_table_header *dmar_tbl);
-extern int tboot_force_iommu(void);
-
-#else     /* CONFIG_INTEL_TXT */
-
-static inline int tboot_enabled(void)
-{
-	return 0;
-}
-
-static inline void tboot_probe(void)
-{
-}
-
-static inline void tboot_create_trampoline(void)
-{
-}
-
-static inline void tboot_shutdown(u32 shutdown_type)
-{
-}
-
-static inline void tboot_sleep(u8 sleep_state, u32 pm1a_control,
-			       u32 pm1b_control)
-{
-}
-
-static inline int tboot_wait_for_aps(int num_aps)
-{
-	return 0;
-}
-
-static inline struct acpi_table_header *tboot_get_dmar_table(
-					struct acpi_table_header *dmar_tbl)
-{
-	return dmar_tbl;
-}
-
-static inline int tboot_force_iommu(void)
-{
-	return 0;
-}
-
-#endif /* !CONFIG_INTEL_TXT */
-
-#endif /* _ASM_TBOOT_H */
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index 9de01c5d979..18ce5c04242 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -3,6 +3,7 @@
 #include <linux/init.h>
 #include <linux/pm.h>
 #include <linux/efi.h>
+#include <linux/tboot.h>
 #include <acpi/reboot.h>
 #include <asm/io.h>
 #include <asm/apic.h>
@@ -24,8 +25,6 @@
 # include <asm/iommu.h>
 #endif
 
-#include <asm/tboot.h>
-
 /*
  * Power off function, if any
  */
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 80d6e9e3248..6ce0d6f38f7 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -66,6 +66,7 @@
 
 #include <linux/percpu.h>
 #include <linux/crash_dump.h>
+#include <linux/tboot.h>
 
 #include <video/edid.h>
 
@@ -145,8 +146,6 @@ struct boot_params __initdata boot_params;
 struct boot_params boot_params;
 #endif
 
-#include <asm/tboot.h>
-
 /*
  * Machine setup..
  */
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 61cc40887c4..7d9d8eea20a 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -47,6 +47,7 @@
 #include <linux/bootmem.h>
 #include <linux/err.h>
 #include <linux/nmi.h>
+#include <linux/tboot.h>
 
 #include <asm/acpi.h>
 #include <asm/desc.h>
@@ -62,7 +63,6 @@
 #include <asm/vmi.h>
 #include <asm/apic.h>
 #include <asm/setup.h>
-#include <asm/tboot.h>
 #include <asm/uv/uv.h>
 #include <linux/mc146818rtc.h>
 
diff --git a/arch/x86/kernel/tboot.c b/arch/x86/kernel/tboot.c
index c2e760ca7b0..86c9f91b48a 100644
--- a/arch/x86/kernel/tboot.c
+++ b/arch/x86/kernel/tboot.c
@@ -22,11 +22,14 @@
 #include <linux/dma_remapping.h>
 #include <linux/init_task.h>
 #include <linux/spinlock.h>
+#include <linux/delay.h>
 #include <linux/sched.h>
 #include <linux/init.h>
 #include <linux/dmar.h>
+#include <linux/cpu.h>
 #include <linux/pfn.h>
 #include <linux/mm.h>
+#include <linux/tboot.h>
 
 #include <asm/trampoline.h>
 #include <asm/processor.h>
@@ -36,7 +39,6 @@
 #include <asm/fixmap.h>
 #include <asm/proto.h>
 #include <asm/setup.h>
-#include <asm/tboot.h>
 #include <asm/e820.h>
 #include <asm/io.h>
 
@@ -154,13 +156,10 @@ static int map_tboot_pages(unsigned long vaddr, unsigned long start_pfn,
 	return 0;
 }
 
-void tboot_create_trampoline(void)
+static void tboot_create_trampoline(void)
 {
 	u32 map_base, map_size;
 
-	if (!tboot_enabled())
-		return;
-
 	/* Create identity map for tboot shutdown code. */
 	map_base = PFN_DOWN(tboot->tboot_base);
 	map_size = PFN_UP(tboot->tboot_size);
@@ -295,21 +294,58 @@ void tboot_sleep(u8 sleep_state, u32 pm1a_control, u32 pm1b_control)
 	tboot_shutdown(acpi_shutdown_map[sleep_state]);
 }
 
-int tboot_wait_for_aps(int num_aps)
+static atomic_t ap_wfs_count;
+
+static int tboot_wait_for_aps(int num_aps)
 {
 	unsigned long timeout;
 
+	timeout = AP_WAIT_TIMEOUT*HZ;
+	while (atomic_read((atomic_t *)&tboot->num_in_wfs) != num_aps &&
+	       timeout) {
+		mdelay(1);
+		timeout--;
+	}
+
+	if (timeout)
+		pr_warning("tboot wait for APs timeout\n");
+
+	return !(atomic_read((atomic_t *)&tboot->num_in_wfs) == num_aps);
+}
+
+static int __cpuinit tboot_cpu_callback(struct notifier_block *nfb,
+			unsigned long action, void *hcpu)
+{
+	switch (action) {
+	case CPU_DYING:
+		atomic_inc(&ap_wfs_count);
+		if (num_online_cpus() == 1)
+			if (tboot_wait_for_aps(atomic_read(&ap_wfs_count)))
+				return NOTIFY_BAD;
+		break;
+	}
+	return NOTIFY_OK;
+}
+
+static struct notifier_block tboot_cpu_notifier __cpuinitdata =
+{
+	.notifier_call = tboot_cpu_callback,
+};
+
+static __init int tboot_late_init(void)
+{
 	if (!tboot_enabled())
 		return 0;
 
-	timeout = jiffies + AP_WAIT_TIMEOUT*HZ;
-	while (atomic_read((atomic_t *)&tboot->num_in_wfs) != num_aps &&
-	       time_before(jiffies, timeout))
-		cpu_relax();
+	tboot_create_trampoline();
 
-	return time_before(jiffies, timeout) ? 0 : 1;
+	atomic_set(&ap_wfs_count, 0);
+	register_hotcpu_notifier(&tboot_cpu_notifier);
+	return 0;
 }
 
+late_initcall(tboot_late_init);
+
 /*
  * TXT configuration registers (offsets from TXT_{PUB, PRIV}_CONFIG_REGS_BASE)
  */
-- 
cgit v1.2.3


From ae4b688db2432baad379f73fdcac13ec24f603d5 Mon Sep 17 00:00:00 2001
From: Huang Ying <ying.huang@intel.com>
Date: Mon, 31 Aug 2009 13:11:54 +0800
Subject: x86: Move kernel_fpu_using to irq_fpu_usable in asm/i387.h

This function measures whether the FPU/SSE state can be touched in
interrupt context. If the interrupted code is in user space or has no
valid FPU/SSE context (CR0.TS == 1), FPU/SSE state can be used in IRQ
or soft_irq context too.

This is used by AES-NI accelerated AES implementation and PCLMULQDQ
accelerated GHASH implementation.

v3:
 - Renamed to irq_fpu_usable to reflect the purpose of the function.

v2:
 - Renamed to irq_is_fpu_using to reflect the real situation.

Signed-off-by: Huang Ying <ying.huang@intel.com>
CC: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/crypto/aesni-intel_glue.c | 17 +++++------------
 arch/x86/include/asm/i387.h        |  8 ++++++++
 2 files changed, 13 insertions(+), 12 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/crypto/aesni-intel_glue.c b/arch/x86/crypto/aesni-intel_glue.c
index c580c5ec1ca..7667235ade1 100644
--- a/arch/x86/crypto/aesni-intel_glue.c
+++ b/arch/x86/crypto/aesni-intel_glue.c
@@ -59,13 +59,6 @@ asmlinkage void aesni_cbc_enc(struct crypto_aes_ctx *ctx, u8 *out,
 asmlinkage void aesni_cbc_dec(struct crypto_aes_ctx *ctx, u8 *out,
 			      const u8 *in, unsigned int len, u8 *iv);
 
-static inline int kernel_fpu_using(void)
-{
-	if (in_interrupt() && !(read_cr0() & X86_CR0_TS))
-		return 1;
-	return 0;
-}
-
 static inline struct crypto_aes_ctx *aes_ctx(void *raw_ctx)
 {
 	unsigned long addr = (unsigned long)raw_ctx;
@@ -89,7 +82,7 @@ static int aes_set_key_common(struct crypto_tfm *tfm, void *raw_ctx,
 		return -EINVAL;
 	}
 
-	if (kernel_fpu_using())
+	if (irq_fpu_usable())
 		err = crypto_aes_expand_key(ctx, in_key, key_len);
 	else {
 		kernel_fpu_begin();
@@ -110,7 +103,7 @@ static void aes_encrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src)
 {
 	struct crypto_aes_ctx *ctx = aes_ctx(crypto_tfm_ctx(tfm));
 
-	if (kernel_fpu_using())
+	if (irq_fpu_usable())
 		crypto_aes_encrypt_x86(ctx, dst, src);
 	else {
 		kernel_fpu_begin();
@@ -123,7 +116,7 @@ static void aes_decrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src)
 {
 	struct crypto_aes_ctx *ctx = aes_ctx(crypto_tfm_ctx(tfm));
 
-	if (kernel_fpu_using())
+	if (irq_fpu_usable())
 		crypto_aes_decrypt_x86(ctx, dst, src);
 	else {
 		kernel_fpu_begin();
@@ -349,7 +342,7 @@ static int ablk_encrypt(struct ablkcipher_request *req)
 	struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(req);
 	struct async_aes_ctx *ctx = crypto_ablkcipher_ctx(tfm);
 
-	if (kernel_fpu_using()) {
+	if (irq_fpu_usable()) {
 		struct ablkcipher_request *cryptd_req =
 			ablkcipher_request_ctx(req);
 		memcpy(cryptd_req, req, sizeof(*req));
@@ -370,7 +363,7 @@ static int ablk_decrypt(struct ablkcipher_request *req)
 	struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(req);
 	struct async_aes_ctx *ctx = crypto_ablkcipher_ctx(tfm);
 
-	if (kernel_fpu_using()) {
+	if (irq_fpu_usable()) {
 		struct ablkcipher_request *cryptd_req =
 			ablkcipher_request_ctx(req);
 		memcpy(cryptd_req, req, sizeof(*req));
diff --git a/arch/x86/include/asm/i387.h b/arch/x86/include/asm/i387.h
index 175adf58dd4..fb7f0d64e14 100644
--- a/arch/x86/include/asm/i387.h
+++ b/arch/x86/include/asm/i387.h
@@ -301,6 +301,14 @@ static inline void kernel_fpu_end(void)
 	preempt_enable();
 }
 
+static inline bool irq_fpu_usable(void)
+{
+	struct pt_regs *regs;
+
+	return !in_interrupt() || !(regs = get_irq_regs()) || \
+		user_mode(regs) || (read_cr0() & X86_CR0_TS);
+}
+
 /*
  * Some instructions like VIA's padlock instructions generate a spurious
  * DNA fault but don't modify SSE registers. And these instructions
-- 
cgit v1.2.3


From 0ed2c722c650513ba4bce868c7a052e576c060e2 Mon Sep 17 00:00:00 2001
From: Grant Likely <grant.likely@secretlab.ca>
Date: Fri, 28 Aug 2009 08:58:16 +0000
Subject: powerpc/pci: Merge ppc32 and ppc64 versions of phb_scan()

The two versions are doing almost exactly the same thing.  No need to
maintain them as separate files.  This patch also has the side effect
of making the PCI device tree scanning code available to 32 bit powerpc
machines, but no board ports actually make use of this feature at this
point.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/pci.h             |  2 ++
 arch/powerpc/include/asm/ppc-pci.h         |  1 -
 arch/powerpc/kernel/of_platform.c          |  2 +-
 arch/powerpc/kernel/pci-common.c           | 49 ++++++++++++++++++++++++++++++
 arch/powerpc/kernel/pci_32.c               | 25 ++-------------
 arch/powerpc/kernel/pci_64.c               | 46 ++++------------------------
 arch/powerpc/platforms/pseries/pci_dlpar.c |  2 +-
 7 files changed, 61 insertions(+), 66 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/pci.h b/arch/powerpc/include/asm/pci.h
index b856a837b4a..7aca4839387 100644
--- a/arch/powerpc/include/asm/pci.h
+++ b/arch/powerpc/include/asm/pci.h
@@ -233,6 +233,8 @@ extern void pci_resource_to_user(const struct pci_dev *dev, int bar,
 
 extern void pcibios_setup_bus_devices(struct pci_bus *bus);
 extern void pcibios_setup_bus_self(struct pci_bus *bus);
+extern void pcibios_setup_phb_io_space(struct pci_controller *hose);
+extern void pcibios_scan_phb(struct pci_controller *hose, void *sysdata);
 
 #endif	/* __KERNEL__ */
 #endif /* __ASM_POWERPC_PCI_H */
diff --git a/arch/powerpc/include/asm/ppc-pci.h b/arch/powerpc/include/asm/ppc-pci.h
index 854ab713f56..2828f9d0f66 100644
--- a/arch/powerpc/include/asm/ppc-pci.h
+++ b/arch/powerpc/include/asm/ppc-pci.h
@@ -39,7 +39,6 @@ void *traverse_pci_devices(struct device_node *start, traverse_func pre,
 
 extern void pci_devs_phb_init(void);
 extern void pci_devs_phb_init_dynamic(struct pci_controller *phb);
-extern void scan_phb(struct pci_controller *hose);
 
 /* From rtas_pci.h */
 extern void init_pci_config_tokens (void);
diff --git a/arch/powerpc/kernel/of_platform.c b/arch/powerpc/kernel/of_platform.c
index 87df428e358..1a4fc0d11a0 100644
--- a/arch/powerpc/kernel/of_platform.c
+++ b/arch/powerpc/kernel/of_platform.c
@@ -276,7 +276,7 @@ static int __devinit of_pci_phb_probe(struct of_device *dev,
 #endif /* CONFIG_EEH */
 
 	/* Scan the bus */
-	scan_phb(phb);
+	pcibios_scan_phb(phb, dev->node);
 	if (phb->bus == NULL)
 		return -ENXIO;
 
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index 8f84a9a8428..e9f4840096b 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -1688,3 +1688,52 @@ int early_find_capability(struct pci_controller *hose, int bus, int devfn,
 {
 	return pci_bus_find_capability(fake_pci_bus(hose, bus), devfn, cap);
 }
+
+/**
+ * pci_scan_phb - Given a pci_controller, setup and scan the PCI bus
+ * @hose: Pointer to the PCI host controller instance structure
+ * @sysdata: value to use for sysdata pointer.  ppc32 and ppc64 differ here
+ *
+ * Note: the 'data' pointer is a temporary measure.  As 32 and 64 bit
+ * pci code gets merged, this parameter should become unnecessary because
+ * both will use the same value.
+ */
+void __devinit pcibios_scan_phb(struct pci_controller *hose, void *sysdata)
+{
+	struct pci_bus *bus;
+	struct device_node *node = hose->dn;
+	int mode;
+
+	pr_debug("PCI: Scanning PHB %s\n",
+		 node ? node->full_name : "<NO NAME>");
+
+	/* Create an empty bus for the toplevel */
+	bus = pci_create_bus(hose->parent, hose->first_busno, hose->ops,
+			     sysdata);
+	if (bus == NULL) {
+		pr_err("Failed to create bus for PCI domain %04x\n",
+			hose->global_number);
+		return;
+	}
+	bus->secondary = hose->first_busno;
+	hose->bus = bus;
+
+	/* Get some IO space for the new PHB */
+	pcibios_setup_phb_io_space(hose);
+
+	/* Wire up PHB bus resources */
+	pcibios_setup_phb_resources(hose);
+
+	/* Get probe mode and perform scan */
+	mode = PCI_PROBE_NORMAL;
+	if (node && ppc_md.pci_probe_mode)
+		mode = ppc_md.pci_probe_mode(bus);
+	pr_debug("    probe mode: %d\n", mode);
+	if (mode == PCI_PROBE_DEVTREE) {
+		bus->subordinate = hose->last_busno;
+		of_scan_bus(node, bus);
+	}
+
+	if (mode == PCI_PROBE_NORMAL)
+		hose->last_busno = bus->subordinate = pci_scan_child_bus(bus);
+}
diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c
index 8cf15d961c3..c13668cf36d 100644
--- a/arch/powerpc/kernel/pci_32.c
+++ b/arch/powerpc/kernel/pci_32.c
@@ -354,36 +354,15 @@ pci_create_OF_bus_map(void)
 	}
 }
 
-static void __devinit pcibios_scan_phb(struct pci_controller *hose)
+void __devinit pcibios_setup_phb_io_space(struct pci_controller *hose)
 {
-	struct pci_bus *bus;
-	struct device_node *node = hose->dn;
 	unsigned long io_offset;
 	struct resource *res = &hose->io_resource;
 
-	pr_debug("PCI: Scanning PHB %s\n",
-		 node ? node->full_name : "<NO NAME>");
-
-	/* Create an empty bus for the toplevel */
-	bus = pci_create_bus(hose->parent, hose->first_busno, hose->ops, hose);
-	if (bus == NULL) {
-		printk(KERN_ERR "Failed to create bus for PCI domain %04x\n",
-		       hose->global_number);
-		return;
-	}
-	bus->secondary = hose->first_busno;
-	hose->bus = bus;
-
 	/* Fixup IO space offset */
 	io_offset = (unsigned long)hose->io_base_virt - isa_io_base;
 	res->start = (res->start + io_offset) & 0xffffffffu;
 	res->end = (res->end + io_offset) & 0xffffffffu;
-
-	/* Wire up PHB bus resources */
-	pcibios_setup_phb_resources(hose);
-
-	/* Scan children */
-	hose->last_busno = bus->subordinate = pci_scan_child_bus(bus);
 }
 
 static int __init pcibios_init(void)
@@ -401,7 +380,7 @@ static int __init pcibios_init(void)
 		if (pci_assign_all_buses)
 			hose->first_busno = next_busno;
 		hose->last_busno = 0xff;
-		pcibios_scan_phb(hose);
+		pcibios_scan_phb(hose, hose);
 		pci_bus_add_devices(hose->bus);
 		if (pci_assign_all_buses || next_busno <= hose->last_busno)
 			next_busno = hose->last_busno + pcibios_assign_bus_offset;
diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c
index 4d5b4ced7e4..ba949a2c93a 100644
--- a/arch/powerpc/kernel/pci_64.c
+++ b/arch/powerpc/kernel/pci_64.c
@@ -43,45 +43,6 @@ unsigned long pci_probe_only = 1;
 unsigned long pci_io_base = ISA_IO_BASE;
 EXPORT_SYMBOL(pci_io_base);
 
-void __devinit scan_phb(struct pci_controller *hose)
-{
-	struct pci_bus *bus;
-	struct device_node *node = hose->dn;
-	int mode;
-
-	pr_debug("PCI: Scanning PHB %s\n",
-		 node ? node->full_name : "<NO NAME>");
-
-	/* Create an empty bus for the toplevel */
-	bus = pci_create_bus(hose->parent, hose->first_busno, hose->ops, node);
-	if (bus == NULL) {
-		printk(KERN_ERR "Failed to create bus for PCI domain %04x\n",
-		       hose->global_number);
-		return;
-	}
-	bus->secondary = hose->first_busno;
-	hose->bus = bus;
-
-	/* Get some IO space for the new PHB */
-	pcibios_map_io_space(bus);
-
-	/* Wire up PHB bus resources */
-	pcibios_setup_phb_resources(hose);
-
-	/* Get probe mode and perform scan */
-	mode = PCI_PROBE_NORMAL;
-	if (node && ppc_md.pci_probe_mode)
-		mode = ppc_md.pci_probe_mode(bus);
-	pr_debug("    probe mode: %d\n", mode);
-	if (mode == PCI_PROBE_DEVTREE) {
-		bus->subordinate = hose->last_busno;
-		of_scan_bus(node, bus);
-	}
-
-	if (mode == PCI_PROBE_NORMAL)
-		hose->last_busno = bus->subordinate = pci_scan_child_bus(bus);
-}
-
 static int __init pcibios_init(void)
 {
 	struct pci_controller *hose, *tmp;
@@ -103,7 +64,7 @@ static int __init pcibios_init(void)
 
 	/* Scan all of the recorded PCI controllers.  */
 	list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
-		scan_phb(hose);
+		pcibios_scan_phb(hose, hose->dn);
 		pci_bus_add_devices(hose->bus);
 	}
 
@@ -237,6 +198,11 @@ int __devinit pcibios_map_io_space(struct pci_bus *bus)
 }
 EXPORT_SYMBOL_GPL(pcibios_map_io_space);
 
+void __devinit pcibios_setup_phb_io_space(struct pci_controller *hose)
+{
+	pcibios_map_io_space(hose->bus);
+}
+
 #define IOBASE_BRIDGE_NUMBER	0
 #define IOBASE_MEMORY		1
 #define IOBASE_IO		2
diff --git a/arch/powerpc/platforms/pseries/pci_dlpar.c b/arch/powerpc/platforms/pseries/pci_dlpar.c
index ad152a0e394..b6fa3e4b51b 100644
--- a/arch/powerpc/platforms/pseries/pci_dlpar.c
+++ b/arch/powerpc/platforms/pseries/pci_dlpar.c
@@ -151,7 +151,7 @@ struct pci_controller * __devinit init_phb_dynamic(struct device_node *dn)
 	if (dn->child)
 		eeh_add_device_tree_early(dn);
 
-	scan_phb(phb);
+	pcibios_scan_phb(phb, dn);
 	pcibios_finish_adding_to_bus(phb->bus);
 
 	return phb;
-- 
cgit v1.2.3


From 46db2f86a3b2a94e0b33e0b4548fb7b7b6bdff66 Mon Sep 17 00:00:00 2001
From: Brian King <brking@linux.vnet.ibm.com>
Date: Fri, 28 Aug 2009 12:06:29 +0000
Subject: powerpc/pseries: Fix to handle slb resize across migration

The SLB can change sizes across a live migration, which was not
being handled, resulting in possible machine crashes during
migration if migrating to a machine which has a smaller max SLB
size than the source machine. Fix this by first reducing the
SLB size to the minimum possible value, which is 32, prior to
migration. Then during the device tree update which occurs after
migration, we make the call to ensure the SLB gets updated. Also
add the slb_size to the lparcfg output so that the migration
tools can check to make sure the kernel has this capability
before allowing migration in scenarios where the SLB size will change.

BenH: Fixed #include <asm/mmu-hash64.h> -> <asm/mmu.h> to avoid
      breaking ppc32 build

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/mmu-hash64.h     |  2 ++
 arch/powerpc/kernel/lparcfg.c             |  3 +++
 arch/powerpc/kernel/rtas.c                |  7 ++++++-
 arch/powerpc/mm/slb.c                     | 16 ++++++++++++----
 arch/powerpc/platforms/pseries/reconfig.c |  9 ++++++++-
 5 files changed, 31 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/mmu-hash64.h b/arch/powerpc/include/asm/mmu-hash64.h
index b537903b9fc..bebe31c2e90 100644
--- a/arch/powerpc/include/asm/mmu-hash64.h
+++ b/arch/powerpc/include/asm/mmu-hash64.h
@@ -41,6 +41,7 @@ extern char initial_stab[];
 
 #define SLB_NUM_BOLTED		3
 #define SLB_CACHE_ENTRIES	8
+#define SLB_MIN_SIZE		32
 
 /* Bits in the SLB ESID word */
 #define SLB_ESID_V		ASM_CONST(0x0000000008000000) /* valid */
@@ -276,6 +277,7 @@ extern void slb_flush_and_rebolt(void);
 extern void stab_initialize(unsigned long stab);
 
 extern void slb_vmalloc_update(void);
+extern void slb_set_size(u16 size);
 #endif /* __ASSEMBLY__ */
 
 /*
diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c
index 2419cc706ff..ed0ac4e4b8d 100644
--- a/arch/powerpc/kernel/lparcfg.c
+++ b/arch/powerpc/kernel/lparcfg.c
@@ -35,6 +35,7 @@
 #include <asm/prom.h>
 #include <asm/vdso_datapage.h>
 #include <asm/vio.h>
+#include <asm/mmu.h>
 
 #define MODULE_VERS "1.8"
 #define MODULE_NAME "lparcfg"
@@ -537,6 +538,8 @@ static int pseries_lparcfg_data(struct seq_file *m, void *v)
 
 	seq_printf(m, "shared_processor_mode=%d\n", lppaca[0].shared_proc);
 
+	seq_printf(m, "slb_size=%d\n", mmu_slb_size);
+
 	return 0;
 }
 
diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c
index c434823b8c8..bf90361bb70 100644
--- a/arch/powerpc/kernel/rtas.c
+++ b/arch/powerpc/kernel/rtas.c
@@ -39,6 +39,7 @@
 #include <asm/smp.h>
 #include <asm/atomic.h>
 #include <asm/time.h>
+#include <asm/mmu.h>
 
 struct rtas_t rtas = {
 	.lock = __RAW_SPIN_LOCK_UNLOCKED
@@ -713,6 +714,7 @@ static void rtas_percpu_suspend_me(void *info)
 {
 	long rc = H_SUCCESS;
 	unsigned long msr_save;
+	u16 slb_size = mmu_slb_size;
 	int cpu;
 	struct rtas_suspend_me_data *data =
 		(struct rtas_suspend_me_data *)info;
@@ -735,13 +737,16 @@ static void rtas_percpu_suspend_me(void *info)
 		/* All other cpus are in H_JOIN, this cpu does
 		 * the suspend.
 		 */
+		slb_set_size(SLB_MIN_SIZE);
 		printk(KERN_DEBUG "calling ibm,suspend-me on cpu %i\n",
 		       smp_processor_id());
 		data->error = rtas_call(data->token, 0, 1, NULL);
 
-		if (data->error)
+		if (data->error) {
 			printk(KERN_DEBUG "ibm,suspend-me returned %d\n",
 			       data->error);
+			slb_set_size(slb_size);
+		}
 	} else {
 		printk(KERN_ERR "H_JOIN on cpu %i failed with rc = %ld\n",
 		       smp_processor_id(), rc);
diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c
index 07961c5c169..1d98ecc8eec 100644
--- a/arch/powerpc/mm/slb.c
+++ b/arch/powerpc/mm/slb.c
@@ -249,14 +249,22 @@ void switch_slb(struct task_struct *tsk, struct mm_struct *mm)
 static inline void patch_slb_encoding(unsigned int *insn_addr,
 				      unsigned int immed)
 {
-	/* Assume the instruction had a "0" immediate value, just
-	 * "or" in the new value
-	 */
-	*insn_addr |= immed;
+	*insn_addr = (*insn_addr & 0xffff0000) | immed;
 	flush_icache_range((unsigned long)insn_addr, 4+
 			   (unsigned long)insn_addr);
 }
 
+void slb_set_size(u16 size)
+{
+	extern unsigned int *slb_compare_rr_to_size;
+
+	if (mmu_slb_size == size)
+		return;
+
+	mmu_slb_size = size;
+	patch_slb_encoding(slb_compare_rr_to_size, mmu_slb_size);
+}
+
 void slb_initialize(void)
 {
 	unsigned long linear_llp, vmalloc_llp, io_llp;
diff --git a/arch/powerpc/platforms/pseries/reconfig.c b/arch/powerpc/platforms/pseries/reconfig.c
index b6f1b137d42..2e2bbe120b9 100644
--- a/arch/powerpc/platforms/pseries/reconfig.c
+++ b/arch/powerpc/platforms/pseries/reconfig.c
@@ -20,6 +20,7 @@
 #include <asm/machdep.h>
 #include <asm/uaccess.h>
 #include <asm/pSeries_reconfig.h>
+#include <asm/mmu.h>
 
 
 
@@ -439,9 +440,15 @@ static int do_update_property(char *buf, size_t bufsize)
 	if (!newprop)
 		return -ENOMEM;
 
+	if (!strcmp(name, "slb-size") || !strcmp(name, "ibm,slb-size"))
+		slb_set_size(*(int *)value);
+
 	oldprop = of_find_property(np, name,NULL);
-	if (!oldprop)
+	if (!oldprop) {
+		if (strlen(name))
+			return prom_add_property(np, newprop);
 		return -ENODEV;
+	}
 
 	rc = prom_update_property(np, newprop, oldprop);
 	if (rc)
-- 
cgit v1.2.3


From 1d5d9527d8ed8d87beb22a4fd954366aeabd12c7 Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@kernel.crashing.org>
Date: Tue, 1 Sep 2009 15:43:54 +0000
Subject: powerpc/book3e: Add missing page sizes

Add defines for the other page sizes.  Even if HW doesn't support them
we made them use them for hugetlbfs support.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/pte-book3e.h | 10 ++++++++++
 1 file changed, 10 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/pte-book3e.h b/arch/powerpc/include/asm/pte-book3e.h
index 9800565aebb..b82b9dc91a7 100644
--- a/arch/powerpc/include/asm/pte-book3e.h
+++ b/arch/powerpc/include/asm/pte-book3e.h
@@ -20,9 +20,19 @@
 #define _PAGE_BAP_UX	0x000080
 #define _PAGE_PSIZE_MSK	0x000f00
 #define _PAGE_PSIZE_4K	0x000200
+#define _PAGE_PSIZE_8K	0x000300
+#define _PAGE_PSIZE_16K	0x000400
+#define _PAGE_PSIZE_32K	0x000500
 #define _PAGE_PSIZE_64K	0x000600
+#define _PAGE_PSIZE_128K	0x000700
+#define _PAGE_PSIZE_256K	0x000800
+#define _PAGE_PSIZE_512K	0x000900
 #define _PAGE_PSIZE_1M	0x000a00
+#define _PAGE_PSIZE_2M	0x000b00
+#define _PAGE_PSIZE_4M	0x000c00
+#define _PAGE_PSIZE_8M	0x000d00
 #define _PAGE_PSIZE_16M	0x000e00
+#define _PAGE_PSIZE_32M	0x000f00
 #define _PAGE_DIRTY	0x001000 /* C: page changed */
 #define _PAGE_SW0	0x002000
 #define _PAGE_U3	0x004000
-- 
cgit v1.2.3


From 76acc2c1a7a9a8c2cae7e9cf8d0a8b374a48aa94 Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@kernel.crashing.org>
Date: Tue, 1 Sep 2009 15:48:42 +0000
Subject: powerpc/fsl-booke: Use HW PTE format if CONFIG_PTE_64BIT

Switch to using the Power ISA defined PTE format when we have a 64-bit
PTE.  This makes the code handling between fsl-booke and book3e-64
similiar for TLB faults.

Additionally this lets use take advantage of the page size encodings and
full permissions that the HW PTE defines.

Also defined _PMD_PRESENT, _PMD_PRESENT_MASK, and _PMD_BAD since the
32-bit ppc arch code expects them.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/pgtable-ppc32.h |  2 ++
 arch/powerpc/include/asm/pte-book3e.h    |  3 +++
 arch/powerpc/include/asm/pte-fsl-booke.h |  7 -------
 arch/powerpc/kernel/head_fsl_booke.S     | 36 ++++++++++++++++++++++----------
 4 files changed, 30 insertions(+), 18 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/pgtable-ppc32.h b/arch/powerpc/include/asm/pgtable-ppc32.h
index f2c52e25395..55646adfa84 100644
--- a/arch/powerpc/include/asm/pgtable-ppc32.h
+++ b/arch/powerpc/include/asm/pgtable-ppc32.h
@@ -111,6 +111,8 @@ extern int icache_44x_need_flush;
 #include <asm/pte-40x.h>
 #elif defined(CONFIG_44x)
 #include <asm/pte-44x.h>
+#elif defined(CONFIG_FSL_BOOKE) && defined(CONFIG_PTE_64BIT)
+#include <asm/pte-book3e.h>
 #elif defined(CONFIG_FSL_BOOKE)
 #include <asm/pte-fsl-booke.h>
 #elif defined(CONFIG_8xx)
diff --git a/arch/powerpc/include/asm/pte-book3e.h b/arch/powerpc/include/asm/pte-book3e.h
index b82b9dc91a7..082d515930a 100644
--- a/arch/powerpc/include/asm/pte-book3e.h
+++ b/arch/powerpc/include/asm/pte-book3e.h
@@ -75,6 +75,9 @@
 /* On 32-bit, we never clear the top part of the PTE */
 #ifdef CONFIG_PPC32
 #define _PTE_NONE_MASK	0xffffffff00000000ULL
+#define _PMD_PRESENT	0
+#define _PMD_PRESENT_MASK (PAGE_MASK)
+#define _PMD_BAD	(~PAGE_MASK)
 #endif
 
 #endif /* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/pte-fsl-booke.h b/arch/powerpc/include/asm/pte-fsl-booke.h
index ce8a9e94ce7..2c12be5f677 100644
--- a/arch/powerpc/include/asm/pte-fsl-booke.h
+++ b/arch/powerpc/include/asm/pte-fsl-booke.h
@@ -33,13 +33,6 @@
 #define _PAGE_WRITETHRU	0x00400	/* H: W bit */
 #define _PAGE_SPECIAL	0x00800 /* S: Special page */
 
-#ifdef CONFIG_PTE_64BIT
-/* ERPN in a PTE never gets cleared, ignore it */
-#define _PTE_NONE_MASK	0xffffffffffff0000ULL
-/* We extend the size of the PTE flags area when using 64-bit PTEs */
-#define PTE_RPN_SHIFT	(PAGE_SHIFT + 8)
-#endif
-
 #define _PMD_PRESENT	0
 #define _PMD_PRESENT_MASK (PAGE_MASK)
 #define _PMD_BAD	(~PAGE_MASK)
diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
index 2c5af525647..975788ca05d 100644
--- a/arch/powerpc/kernel/head_fsl_booke.S
+++ b/arch/powerpc/kernel/head_fsl_booke.S
@@ -575,7 +575,12 @@ interrupt_base:
 	 *       place or can we save a couple of instructions here ?
 	 */
 	mfspr	r12,SPRN_ESR
+#ifdef CONFIG_PTE_64BIT
+	li	r13,_PAGE_PRESENT
+	oris	r13,r13,_PAGE_ACCESSED@h
+#else
 	li	r13,_PAGE_PRESENT|_PAGE_ACCESSED
+#endif
 	rlwimi	r13,r12,11,29,29
 
 	FIND_PTE
@@ -643,7 +648,12 @@ interrupt_base:
 
 4:
 	/* Make up the required permissions */
+#ifdef CONFIG_PTE_64BIT
+	li	r13,_PAGE_PRESENT | _PAGE_EXEC
+	oris	r13,r13,_PAGE_ACCESSED@h
+#else
 	li	r13,_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_EXEC
+#endif
 
 	FIND_PTE
 	andc.	r13,r13,r11		/* Check permission */
@@ -733,7 +743,7 @@ finish_tlb_load:
 
 	mfspr	r12, SPRN_MAS2
 #ifdef CONFIG_PTE_64BIT
-	rlwimi	r12, r11, 26, 24, 31	/* extract ...WIMGE from pte */
+	rlwimi	r12, r11, 32-19, 27, 31	/* extract WIMGE from pte */
 #else
 	rlwimi	r12, r11, 26, 27, 31	/* extract WIMGE from pte */
 #endif
@@ -742,6 +752,20 @@ finish_tlb_load:
 #endif
 	mtspr	SPRN_MAS2, r12
 
+#ifdef CONFIG_PTE_64BIT
+	rlwinm	r12, r11, 32-2, 26, 31	/* Move in perm bits */
+	andi.	r10, r11, _PAGE_DIRTY
+	bne	1f
+	li	r10, MAS3_SW | MAS3_UW
+	andc	r12, r12, r10
+1:	rlwimi	r12, r13, 20, 0, 11	/* grab RPN[32:43] */
+	rlwimi	r12, r11, 20, 12, 19	/* grab RPN[44:51] */
+	mtspr	SPRN_MAS3, r12
+BEGIN_MMU_FTR_SECTION
+	srwi	r10, r13, 12		/* grab RPN[12:31] */
+	mtspr	SPRN_MAS7, r10
+END_MMU_FTR_SECTION_IFSET(MMU_FTR_BIG_PHYS)
+#else
 	li	r10, (_PAGE_EXEC | _PAGE_PRESENT)
 	rlwimi	r10, r11, 31, 29, 29	/* extract _PAGE_DIRTY into SW */
 	and	r12, r11, r10
@@ -749,16 +773,6 @@ finish_tlb_load:
 	slwi	r10, r12, 1
 	or	r10, r10, r12
 	iseleq	r12, r12, r10
-	
-#ifdef CONFIG_PTE_64BIT
-	rlwimi	r12, r13, 24, 0, 7	/* grab RPN[32:39] */
-	rlwimi	r12, r11, 24, 8, 19	/* grab RPN[40:51] */
-	mtspr	SPRN_MAS3, r12
-BEGIN_MMU_FTR_SECTION
-	srwi	r10, r13, 8		/* grab RPN[8:31] */
-	mtspr	SPRN_MAS7, r10
-END_MMU_FTR_SECTION_IFSET(MMU_FTR_BIG_PHYS)
-#else
 	rlwimi	r11, r12, 0, 20, 31	/* Extract RPN from PTE and merge with perms */
 	mtspr	SPRN_MAS3, r11
 #endif
-- 
cgit v1.2.3


From cede3930f0ca6fef353fa01306c72a01420bd45e Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Mon, 31 Aug 2009 21:34:36 +0000
Subject: powerpc: Fix some late PowerMac G5 with PCIe ATI graphics

A misconfiguration by the firmware of the U4 PCIe bridge on PowerMac G5
with the U4 bridge (latest generations, may also affect the iMac G5
"iSight") is causing us to re-assign the PCI BARs of the video card,
which can get it out of sync with the firmware, thus breaking offb.

This works around it by fixing up the bridge configuration properly
at boot time. It also fixes a bug where the firmware provides us with
an incorrect set of accessible regions in the device-tree.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/platforms/powermac/pci.c | 61 +++++++++++++++++++++++++++++++++++
 1 file changed, 61 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c
index 04cdd32624d..e81403b245b 100644
--- a/arch/powerpc/platforms/powermac/pci.c
+++ b/arch/powerpc/platforms/powermac/pci.c
@@ -1286,3 +1286,64 @@ static void fixup_k2_sata(struct pci_dev* dev)
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SERVERWORKS, 0x0240, fixup_k2_sata);
 
+/*
+ * On U4 (aka CPC945) the PCIe root complex "P2P" bridge resource ranges aren't
+ * configured by the firmware. The bridge itself seems to ignore them but it
+ * causes problems with Linux which then re-assigns devices below the bridge,
+ * thus changing addresses of those devices from what was in the device-tree,
+ * which sucks when those are video cards using offb
+ *
+ * We could just mark it transparent but I prefer fixing up the resources to
+ * properly show what's going on here, as I have some doubts about having them
+ * badly configured potentially being an issue for DMA.
+ *
+ * We leave PIO alone, it seems to be fine
+ *
+ * Oh and there's another funny bug. The OF properties advertize the region
+ * 0xf1000000..0xf1ffffff as being forwarded as memory space. But that's
+ * actually not true, this region is the memory mapped config space. So we
+ * also need to filter it out or we'll map things in the wrong place.
+ */
+static void fixup_u4_pcie(struct pci_dev* dev)
+{
+	struct pci_controller *host = pci_bus_to_host(dev->bus);
+	struct resource *region = NULL;
+	u32 reg;
+	int i;
+
+	/* Only do that on PowerMac */
+	if (!machine_is(powermac))
+		return;
+
+	/* Find the largest MMIO region */
+	for (i = 0; i < 3; i++) {
+		struct resource *r = &host->mem_resources[i];
+		if (!(r->flags & IORESOURCE_MEM))
+			continue;
+		/* Skip the 0xf0xxxxxx..f2xxxxxx regions, we know they
+		 * are reserved by HW for other things
+		 */
+		if (r->start >= 0xf0000000 && r->start < 0xf3000000)
+			continue;
+		if (!region || (r->end - r->start) >
+		    (region->end - region->start))
+			region = r;
+	}
+	/* Nothing found, bail */
+	if (region == 0)
+		return;
+
+	/* Print things out */
+	printk(KERN_INFO "PCI: Fixup U4 PCIe bridge range: %pR\n", region);
+
+	/* Fixup bridge config space. We know it's a Mac, resource aren't
+	 * offset so let's just blast them as-is. We also know that they
+	 * fit in 32 bits
+	 */
+	reg = ((region->start >> 16) & 0xfff0) | (region->end & 0xfff00000);
+	pci_write_config_dword(dev, PCI_MEMORY_BASE, reg);
+	pci_write_config_dword(dev, PCI_PREF_BASE_UPPER32, 0);
+	pci_write_config_dword(dev, PCI_PREF_LIMIT_UPPER32, 0);
+	pci_write_config_dword(dev, PCI_PREF_MEMORY_BASE, 0);
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_U4_PCIE, fixup_u4_pcie);
-- 
cgit v1.2.3


From 0fc0b732eaa38beb93a6fb62f77c7bd9622c76ec Mon Sep 17 00:00:00 2001
From: Stephen Hemminger <shemminger@vyatta.com>
Date: Wed, 2 Sep 2009 01:03:33 -0700
Subject: netdev: drivers should make ethtool_ops const

No need to put ethtool_ops in data, they should be const.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/um/drivers/net_kern.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/um/drivers/net_kern.c b/arch/um/drivers/net_kern.c
index 4c75409bc09..f114813ae25 100644
--- a/arch/um/drivers/net_kern.c
+++ b/arch/um/drivers/net_kern.c
@@ -285,7 +285,7 @@ static void uml_net_get_drvinfo(struct net_device *dev,
 	strcpy(info->version, "42");
 }
 
-static struct ethtool_ops uml_net_ethtool_ops = {
+static const struct ethtool_ops uml_net_ethtool_ops = {
 	.get_drvinfo	= uml_net_get_drvinfo,
 	.get_link	= ethtool_op_get_link,
 };
-- 
cgit v1.2.3


From 98b0979f025e5b98ce8f24e6dc0f9713e6f6c88c Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Thu, 9 Jul 2009 15:17:41 +0100
Subject: MMC: MMCI: convert realview MMC to use gpiolib

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-realview/core.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index 17a07e6acfa..ab615e78b79 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -222,6 +222,9 @@ arch_initcall(realview_i2c_init);
 
 #define REALVIEW_SYSMCI	(__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_MCI_OFFSET)
 
+/*
+ * This is only used if GPIOLIB support is disabled
+ */
 static unsigned int realview_mmc_status(struct device *dev)
 {
 	struct amba_device *adev = container_of(dev, struct amba_device, dev);
@@ -238,15 +241,15 @@ static unsigned int realview_mmc_status(struct device *dev)
 struct mmc_platform_data realview_mmc0_plat_data = {
 	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
 	.status		= realview_mmc_status,
-	.gpio_wp	= -1,
-	.gpio_cd	= -1,
+	.gpio_wp	= 17,
+	.gpio_cd	= 16,
 };
 
 struct mmc_platform_data realview_mmc1_plat_data = {
 	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
 	.status		= realview_mmc_status,
-	.gpio_wp	= -1,
-	.gpio_cd	= -1,
+	.gpio_wp	= 19,
+	.gpio_cd	= 18,
 };
 
 /*
-- 
cgit v1.2.3


From 35c9221acb133ecc9abd701a1fb6fa909d177a77 Mon Sep 17 00:00:00 2001
From: wanzongshun <mcuos.com@gmail.com>
Date: Fri, 21 Aug 2009 07:07:46 +0100
Subject: ARM: 5682/1: Add cpu.c and dev.c and modify some files of w90p910
 platform

Add the cpu.c and dev.c and modify w90p910 platform
to apply to use the common API(provided by cpu.c and dev.c)
at the same time, I renamed all w90x900 to nuc900 in every
c file of w90x900 platform and touchscreen's driver name.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-w90x900/Makefile          |   8 +-
 arch/arm/mach-w90x900/clksel.c          |  12 +-
 arch/arm/mach-w90x900/clock.c           |   4 +-
 arch/arm/mach-w90x900/clock.h           |   8 +-
 arch/arm/mach-w90x900/cpu.c             | 212 +++++++++++++++++
 arch/arm/mach-w90x900/cpu.h             |  50 ++--
 arch/arm/mach-w90x900/dev.c             | 389 ++++++++++++++++++++++++++++++
 arch/arm/mach-w90x900/gpio.c            |  78 +++---
 arch/arm/mach-w90x900/irq.c             |  30 +--
 arch/arm/mach-w90x900/mach-nuc910evb.c  |  44 ++++
 arch/arm/mach-w90x900/mach-w90p910evb.c | 407 --------------------------------
 arch/arm/mach-w90x900/mfp-w90p910.c     | 158 -------------
 arch/arm/mach-w90x900/mfp.c             | 158 +++++++++++++
 arch/arm/mach-w90x900/nuc910.c          |  60 +++++
 arch/arm/mach-w90x900/nuc910.h          |  28 +++
 arch/arm/mach-w90x900/time.c            |  70 +++---
 arch/arm/mach-w90x900/w90p910.c         | 224 ------------------
 17 files changed, 1021 insertions(+), 919 deletions(-)
 create mode 100644 arch/arm/mach-w90x900/cpu.c
 create mode 100644 arch/arm/mach-w90x900/dev.c
 create mode 100644 arch/arm/mach-w90x900/mach-nuc910evb.c
 delete mode 100644 arch/arm/mach-w90x900/mach-w90p910evb.c
 delete mode 100644 arch/arm/mach-w90x900/mfp-w90p910.c
 create mode 100644 arch/arm/mach-w90x900/mfp.c
 create mode 100644 arch/arm/mach-w90x900/nuc910.c
 create mode 100644 arch/arm/mach-w90x900/nuc910.h
 delete mode 100644 arch/arm/mach-w90x900/w90p910.c

(limited to 'arch')

diff --git a/arch/arm/mach-w90x900/Makefile b/arch/arm/mach-w90x900/Makefile
index 3ccd625455c..e38aa328e60 100644
--- a/arch/arm/mach-w90x900/Makefile
+++ b/arch/arm/mach-w90x900/Makefile
@@ -4,12 +4,12 @@
 
 # Object file lists.
 
-obj-y				:= irq.o time.o mfp-w90p910.o gpio.o clock.o
-obj-y				+= clksel.o
+obj-y				:= irq.o time.o mfp.o gpio.o clock.o
+obj-y				+= clksel.o dev.o cpu.o
 # W90X900 CPU support files
 
-obj-$(CONFIG_CPU_W90P910)	+= w90p910.o
+obj-$(CONFIG_CPU_W90P910)	+= nuc910.o
 
 # machine support
 
-obj-$(CONFIG_MACH_W90P910EVB)	+= mach-w90p910evb.o
+obj-$(CONFIG_MACH_W90P910EVB)	+= mach-nuc910evb.o
diff --git a/arch/arm/mach-w90x900/clksel.c b/arch/arm/mach-w90x900/clksel.c
index 5a77eb91cb1..3de4a5211c3 100644
--- a/arch/arm/mach-w90x900/clksel.c
+++ b/arch/arm/mach-w90x900/clksel.c
@@ -42,13 +42,13 @@ static void clock_source_select(const char *dev_id, unsigned int clkval)
 
 	clksel = __raw_readl(REG_CLKSEL);
 
-	if (strcmp(dev_id, "w90p910-ms") == 0)
+	if (strcmp(dev_id, "nuc900-ms") == 0)
 		offset = MSOFFSET;
-	else if (strcmp(dev_id, "w90p910-atapi") == 0)
+	else if (strcmp(dev_id, "nuc900-atapi") == 0)
 		offset = ATAOFFSET;
-	else if (strcmp(dev_id, "w90p910-lcd") == 0)
+	else if (strcmp(dev_id, "nuc900-lcd") == 0)
 		offset = LCDOFFSET;
-	else if (strcmp(dev_id, "w90p910-audio") == 0)
+	else if (strcmp(dev_id, "nuc900-audio") == 0)
 		offset = AUDOFFSET;
 	else
 		offset = CPUOFFSET;
@@ -59,7 +59,7 @@ static void clock_source_select(const char *dev_id, unsigned int clkval)
 	__raw_writel(clksel, REG_CLKSEL);
 }
 
-void w90p910_clock_source(struct device *dev, unsigned char *src)
+void nuc900_clock_source(struct device *dev, unsigned char *src)
 {
 	unsigned int clkval;
 	const char *dev_id;
@@ -87,5 +87,5 @@ void w90p910_clock_source(struct device *dev, unsigned char *src)
 
 	mutex_unlock(&clksel_sem);
 }
-EXPORT_SYMBOL(w90p910_clock_source);
+EXPORT_SYMBOL(nuc900_clock_source);
 
diff --git a/arch/arm/mach-w90x900/clock.c b/arch/arm/mach-w90x900/clock.c
index 70b67109637..b785994bab0 100644
--- a/arch/arm/mach-w90x900/clock.c
+++ b/arch/arm/mach-w90x900/clock.c
@@ -61,7 +61,7 @@ unsigned long clk_get_rate(struct clk *clk)
 }
 EXPORT_SYMBOL(clk_get_rate);
 
-void w90x900_clk_enable(struct clk *clk, int enable)
+void nuc900_clk_enable(struct clk *clk, int enable)
 {
 	unsigned int clocks = clk->cken;
 	unsigned long clken;
@@ -76,7 +76,7 @@ void w90x900_clk_enable(struct clk *clk, int enable)
 	__raw_writel(clken, W90X900_VA_CLKPWR);
 }
 
-void w90x900_subclk_enable(struct clk *clk, int enable)
+void nuc900_subclk_enable(struct clk *clk, int enable)
 {
 	unsigned int clocks = clk->cken;
 	unsigned long clken;
diff --git a/arch/arm/mach-w90x900/clock.h b/arch/arm/mach-w90x900/clock.h
index d2f0e50a70b..f5816a06eed 100644
--- a/arch/arm/mach-w90x900/clock.h
+++ b/arch/arm/mach-w90x900/clock.h
@@ -12,8 +12,8 @@
 
 #include <asm/clkdev.h>
 
-void w90x900_clk_enable(struct clk *clk, int enable);
-void w90x900_subclk_enable(struct clk *clk, int enable);
+void nuc900_clk_enable(struct clk *clk, int enable);
+void nuc900_subclk_enable(struct clk *clk, int enable);
 void clks_register(struct clk_lookup *clks, size_t num);
 
 struct clk {
@@ -24,13 +24,13 @@ struct clk {
 
 #define DEFINE_CLK(_name, _ctrlbit)			\
 struct clk clk_##_name = {				\
-		.enable	= w90x900_clk_enable,		\
+		.enable	= nuc900_clk_enable,		\
 		.cken	= (1 << _ctrlbit),		\
 	}
 
 #define DEFINE_SUBCLK(_name, _ctrlbit)			\
 struct clk clk_##_name = {				\
-		.enable	= w90x900_subclk_enable,	\
+		.enable	= nuc900_subclk_enable,	\
 		.cken	= (1 << _ctrlbit),		\
 	}
 
diff --git a/arch/arm/mach-w90x900/cpu.c b/arch/arm/mach-w90x900/cpu.c
new file mode 100644
index 00000000000..921cef991bf
--- /dev/null
+++ b/arch/arm/mach-w90x900/cpu.c
@@ -0,0 +1,212 @@
+/*
+ * linux/arch/arm/mach-w90x900/cpu.c
+ *
+ * Copyright (c) 2009 Nuvoton corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * NUC900 series cpu common support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/serial_8250.h>
+#include <linux/delay.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-serial.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-ebi.h>
+
+#include "cpu.h"
+#include "clock.h"
+
+/* Initial IO mappings */
+
+static struct map_desc nuc900_iodesc[] __initdata = {
+	IODESC_ENT(IRQ),
+	IODESC_ENT(GCR),
+	IODESC_ENT(UART),
+	IODESC_ENT(TIMER),
+	IODESC_ENT(EBI),
+};
+
+/* Initial clock declarations. */
+static DEFINE_CLK(lcd, 0);
+static DEFINE_CLK(audio, 1);
+static DEFINE_CLK(fmi, 4);
+static DEFINE_SUBCLK(ms, 0);
+static DEFINE_SUBCLK(sd, 1);
+static DEFINE_CLK(dmac, 5);
+static DEFINE_CLK(atapi, 6);
+static DEFINE_CLK(emc, 7);
+static DEFINE_SUBCLK(rmii, 2);
+static DEFINE_CLK(usbd, 8);
+static DEFINE_CLK(usbh, 9);
+static DEFINE_CLK(g2d, 10);;
+static DEFINE_CLK(pwm, 18);
+static DEFINE_CLK(ps2, 24);
+static DEFINE_CLK(kpi, 25);
+static DEFINE_CLK(wdt, 26);
+static DEFINE_CLK(gdma, 27);
+static DEFINE_CLK(adc, 28);
+static DEFINE_CLK(usi, 29);
+static DEFINE_CLK(ext, 0);
+
+static struct clk_lookup nuc900_clkregs[] = {
+	DEF_CLKLOOK(&clk_lcd, "nuc900-lcd", NULL),
+	DEF_CLKLOOK(&clk_audio, "nuc900-audio", NULL),
+	DEF_CLKLOOK(&clk_fmi, "nuc900-fmi", NULL),
+	DEF_CLKLOOK(&clk_ms, "nuc900-fmi", "MS"),
+	DEF_CLKLOOK(&clk_sd, "nuc900-fmi", "SD"),
+	DEF_CLKLOOK(&clk_dmac, "nuc900-dmac", NULL),
+	DEF_CLKLOOK(&clk_atapi, "nuc900-atapi", NULL),
+	DEF_CLKLOOK(&clk_emc, "nuc900-emc", NULL),
+	DEF_CLKLOOK(&clk_rmii, "nuc900-emc", "RMII"),
+	DEF_CLKLOOK(&clk_usbd, "nuc900-usbd", NULL),
+	DEF_CLKLOOK(&clk_usbh, "nuc900-usbh", NULL),
+	DEF_CLKLOOK(&clk_g2d, "nuc900-g2d", NULL),
+	DEF_CLKLOOK(&clk_pwm, "nuc900-pwm", NULL),
+	DEF_CLKLOOK(&clk_ps2, "nuc900-ps2", NULL),
+	DEF_CLKLOOK(&clk_kpi, "nuc900-kpi", NULL),
+	DEF_CLKLOOK(&clk_wdt, "nuc900-wdt", NULL),
+	DEF_CLKLOOK(&clk_gdma, "nuc900-gdma", NULL),
+	DEF_CLKLOOK(&clk_adc, "nuc900-adc", NULL),
+	DEF_CLKLOOK(&clk_usi, "nuc900-spi", NULL),
+	DEF_CLKLOOK(&clk_ext, NULL, "ext"),
+};
+
+/* Initial serial platform data */
+
+struct plat_serial8250_port nuc900_uart_data[] = {
+	NUC900_8250PORT(UART0),
+};
+
+struct platform_device nuc900_serial_device = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev			= {
+		.platform_data	= nuc900_uart_data,
+	},
+};
+
+/*Set NUC900 series cpu frequence*/
+static int __init nuc900_set_clkval(unsigned int cpufreq)
+{
+	unsigned int pllclk, ahbclk, apbclk, val;
+
+	pllclk = 0;
+	ahbclk = 0;
+	apbclk = 0;
+
+	switch (cpufreq) {
+	case 66:
+		pllclk = PLL_66MHZ;
+		ahbclk = AHB_CPUCLK_1_1;
+		apbclk = APB_AHB_1_2;
+		break;
+
+	case 100:
+		pllclk = PLL_100MHZ;
+		ahbclk = AHB_CPUCLK_1_1;
+		apbclk = APB_AHB_1_2;
+		break;
+
+	case 120:
+		pllclk = PLL_120MHZ;
+		ahbclk = AHB_CPUCLK_1_2;
+		apbclk = APB_AHB_1_2;
+		break;
+
+	case 166:
+		pllclk = PLL_166MHZ;
+		ahbclk = AHB_CPUCLK_1_2;
+		apbclk = APB_AHB_1_2;
+		break;
+
+	case 200:
+		pllclk = PLL_200MHZ;
+		ahbclk = AHB_CPUCLK_1_2;
+		apbclk = APB_AHB_1_2;
+		break;
+	}
+
+	__raw_writel(pllclk, REG_PLLCON0);
+
+	val = __raw_readl(REG_CLKDIV);
+	val &= ~(0x03 << 24 | 0x03 << 26);
+	val |= (ahbclk << 24 | apbclk << 26);
+	__raw_writel(val, REG_CLKDIV);
+
+	return 	0;
+}
+static int __init nuc900_set_cpufreq(char *str)
+{
+	unsigned long cpufreq, val;
+
+	if (!*str)
+		return 0;
+
+	strict_strtoul(str, 0, &cpufreq);
+
+	nuc900_clock_source(NULL, "ext");
+
+	nuc900_set_clkval(cpufreq);
+
+	mdelay(1);
+
+	val = __raw_readl(REG_CKSKEW);
+	val &= ~0xff;
+	val |= DEFAULTSKEW;
+	__raw_writel(val, REG_CKSKEW);
+
+	nuc900_clock_source(NULL, "pll0");
+
+	return 1;
+}
+
+__setup("cpufreq=", nuc900_set_cpufreq);
+
+/*Init NUC900 evb io*/
+
+void __init nuc900_map_io(struct map_desc *mach_desc, int mach_size)
+{
+	unsigned long idcode = 0x0;
+
+	iotable_init(mach_desc, mach_size);
+	iotable_init(nuc900_iodesc, ARRAY_SIZE(nuc900_iodesc));
+
+	idcode = __raw_readl(NUC900PDID);
+	if (idcode == NUC910_CPUID)
+		printk(KERN_INFO "CPU type 0x%08lx is NUC910\n", idcode);
+	else if (idcode == NUC920_CPUID)
+		printk(KERN_INFO "CPU type 0x%08lx is NUC920\n", idcode);
+	else if (idcode == NUC950_CPUID)
+		printk(KERN_INFO "CPU type 0x%08lx is NUC950\n", idcode);
+	else if (idcode == NUC960_CPUID)
+		printk(KERN_INFO "CPU type 0x%08lx is NUC960\n", idcode);
+}
+
+/*Init NUC900 clock*/
+
+void __init nuc900_init_clocks(void)
+{
+	clks_register(nuc900_clkregs, ARRAY_SIZE(nuc900_clkregs));
+}
+
diff --git a/arch/arm/mach-w90x900/cpu.h b/arch/arm/mach-w90x900/cpu.h
index ddde959d898..4d58ba164e2 100644
--- a/arch/arm/mach-w90x900/cpu.h
+++ b/arch/arm/mach-w90x900/cpu.h
@@ -6,7 +6,7 @@
  * Copyright (c) 2008 Nuvoton technology corporation
  * All rights reserved.
  *
- * Header file for W90X900 CPU support
+ * Header file for NUC900 CPU support
  *
  * Wan ZongShun <mcuos.com@gmail.com>
  *
@@ -24,30 +24,7 @@
        .type    = MT_DEVICE,                           \
 }
 
-/*Cpu identifier register*/
-
-#define W90X900PDID	W90X900_VA_GCR
-#define W90P910_CPUID	0x02900910
-#define W90P920_CPUID	0x02900920
-#define W90P950_CPUID	0x02900950
-#define W90N960_CPUID	0x02900960
-
-struct w90x900_uartcfg;
-struct map_desc;
-struct sys_timer;
-
-/* core initialisation functions */
-
-extern void w90x900_init_irq(void);
-extern void w90p910_init_io(struct map_desc *mach_desc, int size);
-extern void w90p910_init_uarts(struct w90x900_uartcfg *cfg, int no);
-extern void w90p910_init_clocks(void);
-extern void w90p910_map_io(struct map_desc *mach_desc, int size);
-extern struct platform_device w90p910_serial_device;
-extern struct sys_timer w90x900_timer;
-extern void w90p910_clock_source(struct device *dev, unsigned char *src);
-
-#define W90X900_8250PORT(name)					\
+#define NUC900_8250PORT(name)					\
 {								\
 	.membase	= name##_BA,				\
 	.mapbase	= name##_PA,				\
@@ -57,3 +34,26 @@ extern void w90p910_clock_source(struct device *dev, unsigned char *src);
 	.iotype		= UPIO_MEM,				\
 	.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,	\
 }
+
+/*Cpu identifier register*/
+
+#define NUC900PDID	W90X900_VA_GCR
+#define NUC910_CPUID	0x02900910
+#define NUC920_CPUID	0x02900920
+#define NUC950_CPUID	0x02900950
+#define NUC960_CPUID	0x02900960
+
+/* extern file from cpu.c */
+
+extern void nuc900_clock_source(struct device *dev, unsigned char *src);
+extern void nuc900_init_clocks(void);
+extern void nuc900_map_io(struct map_desc *mach_desc, int mach_size);
+extern void nuc900_board_init(struct platform_device **device, int size);
+
+/* for either public between 910 and 920, or between 920 and 950 */
+
+extern struct platform_device nuc900_serial_device;
+extern struct platform_device nuc900_device_fmi;
+extern struct platform_device nuc900_device_kpi;
+extern struct platform_device nuc900_device_rtc;
+extern struct platform_device nuc900_device_ts;
diff --git a/arch/arm/mach-w90x900/dev.c b/arch/arm/mach-w90x900/dev.c
new file mode 100644
index 00000000000..2a6f98de48d
--- /dev/null
+++ b/arch/arm/mach-w90x900/dev.c
@@ -0,0 +1,389 @@
+/*
+ * linux/arch/arm/mach-w90x900/dev.c
+ *
+ * Copyright (C) 2009 Nuvoton corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach-types.h>
+
+#include <mach/regs-serial.h>
+#include <mach/map.h>
+
+#include "cpu.h"
+
+/*NUC900 evb norflash driver data */
+
+#define NUC900_FLASH_BASE	0xA0000000
+#define NUC900_FLASH_SIZE	0x400000
+#define SPIOFFSET		0x200
+#define SPIOREG_SIZE		0x100
+
+static struct mtd_partition nuc900_flash_partitions[] = {
+	{
+		.name	=	"NOR Partition 1 for kernel (960K)",
+		.size	=	0xF0000,
+		.offset	=	0x10000,
+	},
+	{
+		.name	=	"NOR Partition 2 for image (1M)",
+		.size	=	0x100000,
+		.offset	=	0x100000,
+	},
+	{
+		.name	=	"NOR Partition 3 for user (2M)",
+		.size	=	0x200000,
+		.offset	=	0x00200000,
+	}
+};
+
+static struct physmap_flash_data nuc900_flash_data = {
+	.width		=	2,
+	.parts		=	nuc900_flash_partitions,
+	.nr_parts	=	ARRAY_SIZE(nuc900_flash_partitions),
+};
+
+static struct resource nuc900_flash_resources[] = {
+	{
+		.start	=	NUC900_FLASH_BASE,
+		.end	=	NUC900_FLASH_BASE + NUC900_FLASH_SIZE - 1,
+		.flags	=	IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device nuc900_flash_device = {
+	.name		=	"physmap-flash",
+	.id		=	0,
+	.dev		= {
+				.platform_data = &nuc900_flash_data,
+			},
+	.resource	=	nuc900_flash_resources,
+	.num_resources	=	ARRAY_SIZE(nuc900_flash_resources),
+};
+
+/* USB EHCI Host Controller */
+
+static struct resource nuc900_usb_ehci_resource[] = {
+	[0] = {
+		.start = W90X900_PA_USBEHCIHOST,
+		.end   = W90X900_PA_USBEHCIHOST + W90X900_SZ_USBEHCIHOST - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_USBH,
+		.end   = IRQ_USBH,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static u64 nuc900_device_usb_ehci_dmamask = 0xffffffffUL;
+
+static struct platform_device nuc900_device_usb_ehci = {
+	.name		  = "nuc900-ehci",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(nuc900_usb_ehci_resource),
+	.resource	  = nuc900_usb_ehci_resource,
+	.dev              = {
+		.dma_mask = &nuc900_device_usb_ehci_dmamask,
+		.coherent_dma_mask = 0xffffffffUL
+	}
+};
+
+/* USB OHCI Host Controller */
+
+static struct resource nuc900_usb_ohci_resource[] = {
+	[0] = {
+		.start = W90X900_PA_USBOHCIHOST,
+		.end   = W90X900_PA_USBOHCIHOST + W90X900_SZ_USBOHCIHOST - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_USBH,
+		.end   = IRQ_USBH,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static u64 nuc900_device_usb_ohci_dmamask = 0xffffffffUL;
+static struct platform_device nuc900_device_usb_ohci = {
+	.name		  = "nuc900-ohci",
+	.id		  = -1,
+	.num_resources	  = ARRAY_SIZE(nuc900_usb_ohci_resource),
+	.resource	  = nuc900_usb_ohci_resource,
+	.dev              = {
+		.dma_mask = &nuc900_device_usb_ohci_dmamask,
+		.coherent_dma_mask = 0xffffffffUL
+	}
+};
+
+/* USB Device (Gadget)*/
+
+static struct resource nuc900_usbgadget_resource[] = {
+	[0] = {
+		.start = W90X900_PA_USBDEV,
+		.end   = W90X900_PA_USBDEV + W90X900_SZ_USBDEV - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_USBD,
+		.end   = IRQ_USBD,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device nuc900_device_usbgadget = {
+	.name		= "nuc900-usbgadget",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(nuc900_usbgadget_resource),
+	.resource	= nuc900_usbgadget_resource,
+};
+
+/* MAC device */
+
+static struct resource nuc900_emc_resource[] = {
+	[0] = {
+		.start = W90X900_PA_EMC,
+		.end   = W90X900_PA_EMC + W90X900_SZ_EMC - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_EMCTX,
+		.end   = IRQ_EMCTX,
+		.flags = IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start = IRQ_EMCRX,
+		.end   = IRQ_EMCRX,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static u64 nuc900_device_emc_dmamask = 0xffffffffUL;
+static struct platform_device nuc900_device_emc = {
+	.name		= "nuc900-emc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(nuc900_emc_resource),
+	.resource	= nuc900_emc_resource,
+	.dev              = {
+		.dma_mask = &nuc900_device_emc_dmamask,
+		.coherent_dma_mask = 0xffffffffUL
+	}
+};
+
+/* SPI device */
+
+static struct resource nuc900_spi_resource[] = {
+	[0] = {
+		.start = W90X900_PA_I2C + SPIOFFSET,
+		.end   = W90X900_PA_I2C + SPIOFFSET + SPIOREG_SIZE - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_SSP,
+		.end   = IRQ_SSP,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device nuc900_device_spi = {
+	.name		= "nuc900-spi",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(nuc900_spi_resource),
+	.resource	= nuc900_spi_resource,
+};
+
+/* spi device, spi flash info */
+
+static struct mtd_partition nuc900_spi_flash_partitions[] = {
+	{
+		.name = "bootloader(spi)",
+		.size = 0x0100000,
+		.offset = 0,
+	},
+};
+
+static struct flash_platform_data nuc900_spi_flash_data = {
+	.name = "m25p80",
+	.parts =  nuc900_spi_flash_partitions,
+	.nr_parts = ARRAY_SIZE(nuc900_spi_flash_partitions),
+	.type = "w25x16",
+};
+
+static struct spi_board_info nuc900_spi_board_info[] __initdata = {
+	{
+		.modalias = "m25p80",
+		.max_speed_hz = 20000000,
+		.bus_num = 0,
+		.chip_select = 1,
+		.platform_data = &nuc900_spi_flash_data,
+		.mode = SPI_MODE_0,
+	},
+};
+
+/* WDT Device */
+
+static struct resource nuc900_wdt_resource[] = {
+	[0] = {
+		.start = W90X900_PA_TIMER,
+		.end   = W90X900_PA_TIMER + W90X900_SZ_TIMER - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_WDT,
+		.end   = IRQ_WDT,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device nuc900_device_wdt = {
+	.name		= "nuc900-wdt",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(nuc900_wdt_resource),
+	.resource	= nuc900_wdt_resource,
+};
+
+/*
+ * public device definition between 910 and 920, or 910
+ * and 950 or 950 and 960...,their dev platform register
+ * should be in specific file such as nuc950, nuc960 c
+ * files rather than the public dev.c file here. so the
+ * corresponding platform_device definition should not be
+ * static.
+*/
+
+/* RTC controller*/
+
+static struct resource nuc900_rtc_resource[] = {
+	[0] = {
+		.start = W90X900_PA_RTC,
+		.end   = W90X900_PA_RTC + 0xff,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_RTC,
+		.end   = IRQ_RTC,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device nuc900_device_rtc = {
+	.name		= "nuc900-rtc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(nuc900_rtc_resource),
+	.resource	= nuc900_rtc_resource,
+};
+
+/*TouchScreen controller*/
+
+static struct resource nuc900_ts_resource[] = {
+	[0] = {
+		.start = W90X900_PA_ADC,
+		.end   = W90X900_PA_ADC + W90X900_SZ_ADC-1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_ADC,
+		.end   = IRQ_ADC,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device nuc900_device_ts = {
+	.name		= "nuc900-ts",
+	.id		= -1,
+	.resource	= nuc900_ts_resource,
+	.num_resources	= ARRAY_SIZE(nuc900_ts_resource),
+};
+
+/* FMI Device */
+
+static struct resource nuc900_fmi_resource[] = {
+	[0] = {
+		.start = W90X900_PA_FMI,
+		.end   = W90X900_PA_FMI + W90X900_SZ_FMI - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_FMI,
+		.end   = IRQ_FMI,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+struct platform_device nuc900_device_fmi = {
+	.name		= "nuc900-fmi",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(nuc900_fmi_resource),
+	.resource	= nuc900_fmi_resource,
+};
+
+/* KPI controller*/
+
+static struct resource nuc900_kpi_resource[] = {
+	[0] = {
+		.start = W90X900_PA_KPI,
+		.end   = W90X900_PA_KPI + W90X900_SZ_KPI - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_KPI,
+		.end   = IRQ_KPI,
+		.flags = IORESOURCE_IRQ,
+	}
+
+};
+
+struct platform_device nuc900_device_kpi = {
+	.name		= "nuc900-kpi",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(nuc900_kpi_resource),
+	.resource	= nuc900_kpi_resource,
+};
+
+/*Here should be your evb resourse,such as LCD*/
+
+static struct platform_device *nuc900_public_dev[] __initdata = {
+	&nuc900_serial_device,
+	&nuc900_flash_device,
+	&nuc900_device_usb_ehci,
+	&nuc900_device_usb_ohci,
+	&nuc900_device_usbgadget,
+	&nuc900_device_emc,
+	&nuc900_device_spi,
+	&nuc900_device_wdt,
+};
+
+/* Provide adding specific CPU platform devices API */
+
+void __init nuc900_board_init(struct platform_device **device, int size)
+{
+	platform_add_devices(device, size);
+	platform_add_devices(nuc900_public_dev, ARRAY_SIZE(nuc900_public_dev));
+	spi_register_board_info(nuc900_spi_board_info,
+					ARRAY_SIZE(nuc900_spi_board_info));
+}
+
diff --git a/arch/arm/mach-w90x900/gpio.c b/arch/arm/mach-w90x900/gpio.c
index c72e0dfa182..ba05aec7ea4 100644
--- a/arch/arm/mach-w90x900/gpio.c
+++ b/arch/arm/mach-w90x900/gpio.c
@@ -1,7 +1,7 @@
 /*
- * linux/arch/arm/mach-w90p910/gpio.c
+ * linux/arch/arm/mach-w90x900/gpio.c
  *
- * Generic w90p910 GPIO handling
+ * Generic nuc900 GPIO handling
  *
  *  Wan ZongShun <mcuos.com@gmail.com>
  *
@@ -30,31 +30,31 @@
 #define GPIO_IN			(0x0C)
 #define GROUPINERV		(0x10)
 #define GPIO_GPIO(Nb)		(0x00000001 << (Nb))
-#define to_w90p910_gpio_chip(c) container_of(c, struct w90p910_gpio_chip, chip)
+#define to_nuc900_gpio_chip(c) container_of(c, struct nuc900_gpio_chip, chip)
 
-#define W90P910_GPIO_CHIP(name, base_gpio, nr_gpio)			\
+#define NUC900_GPIO_CHIP(name, base_gpio, nr_gpio)			\
 	{								\
 		.chip = {						\
 			.label		  = name,			\
-			.direction_input  = w90p910_dir_input,		\
-			.direction_output = w90p910_dir_output,		\
-			.get		  = w90p910_gpio_get,		\
-			.set		  = w90p910_gpio_set,		\
+			.direction_input  = nuc900_dir_input,		\
+			.direction_output = nuc900_dir_output,		\
+			.get		  = nuc900_gpio_get,		\
+			.set		  = nuc900_gpio_set,		\
 			.base		  = base_gpio,			\
 			.ngpio		  = nr_gpio,			\
 		}							\
 	}
 
-struct w90p910_gpio_chip {
+struct nuc900_gpio_chip {
 	struct gpio_chip	chip;
 	void __iomem		*regbase;	/* Base of group register*/
 	spinlock_t 		gpio_lock;
 };
 
-static int w90p910_gpio_get(struct gpio_chip *chip, unsigned offset)
+static int nuc900_gpio_get(struct gpio_chip *chip, unsigned offset)
 {
-	struct w90p910_gpio_chip *w90p910_gpio = to_w90p910_gpio_chip(chip);
-	void __iomem *pio = w90p910_gpio->regbase + GPIO_IN;
+	struct nuc900_gpio_chip *nuc900_gpio = to_nuc900_gpio_chip(chip);
+	void __iomem *pio = nuc900_gpio->regbase + GPIO_IN;
 	unsigned int regval;
 
 	regval = __raw_readl(pio);
@@ -63,14 +63,14 @@ static int w90p910_gpio_get(struct gpio_chip *chip, unsigned offset)
 	return (regval != 0);
 }
 
-static void w90p910_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
+static void nuc900_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
 {
-	struct w90p910_gpio_chip *w90p910_gpio = to_w90p910_gpio_chip(chip);
-	void __iomem *pio = w90p910_gpio->regbase + GPIO_OUT;
+	struct nuc900_gpio_chip *nuc900_gpio = to_nuc900_gpio_chip(chip);
+	void __iomem *pio = nuc900_gpio->regbase + GPIO_OUT;
 	unsigned int regval;
 	unsigned long flags;
 
-	spin_lock_irqsave(&w90p910_gpio->gpio_lock, flags);
+	spin_lock_irqsave(&nuc900_gpio->gpio_lock, flags);
 
 	regval = __raw_readl(pio);
 
@@ -81,36 +81,36 @@ static void w90p910_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
 
 	__raw_writel(regval, pio);
 
-	spin_unlock_irqrestore(&w90p910_gpio->gpio_lock, flags);
+	spin_unlock_irqrestore(&nuc900_gpio->gpio_lock, flags);
 }
 
-static int w90p910_dir_input(struct gpio_chip *chip, unsigned offset)
+static int nuc900_dir_input(struct gpio_chip *chip, unsigned offset)
 {
-	struct w90p910_gpio_chip *w90p910_gpio = to_w90p910_gpio_chip(chip);
-	void __iomem *pio = w90p910_gpio->regbase + GPIO_DIR;
+	struct nuc900_gpio_chip *nuc900_gpio = to_nuc900_gpio_chip(chip);
+	void __iomem *pio = nuc900_gpio->regbase + GPIO_DIR;
 	unsigned int regval;
 	unsigned long flags;
 
-	spin_lock_irqsave(&w90p910_gpio->gpio_lock, flags);
+	spin_lock_irqsave(&nuc900_gpio->gpio_lock, flags);
 
 	regval = __raw_readl(pio);
 	regval &= ~GPIO_GPIO(offset);
 	__raw_writel(regval, pio);
 
-	spin_unlock_irqrestore(&w90p910_gpio->gpio_lock, flags);
+	spin_unlock_irqrestore(&nuc900_gpio->gpio_lock, flags);
 
 	return 0;
 }
 
-static int w90p910_dir_output(struct gpio_chip *chip, unsigned offset, int val)
+static int nuc900_dir_output(struct gpio_chip *chip, unsigned offset, int val)
 {
-	struct w90p910_gpio_chip *w90p910_gpio = to_w90p910_gpio_chip(chip);
-	void __iomem *outreg = w90p910_gpio->regbase + GPIO_OUT;
-	void __iomem *pio = w90p910_gpio->regbase + GPIO_DIR;
+	struct nuc900_gpio_chip *nuc900_gpio = to_nuc900_gpio_chip(chip);
+	void __iomem *outreg = nuc900_gpio->regbase + GPIO_OUT;
+	void __iomem *pio = nuc900_gpio->regbase + GPIO_DIR;
 	unsigned int regval;
 	unsigned long flags;
 
-	spin_lock_irqsave(&w90p910_gpio->gpio_lock, flags);
+	spin_lock_irqsave(&nuc900_gpio->gpio_lock, flags);
 
 	regval = __raw_readl(pio);
 	regval |= GPIO_GPIO(offset);
@@ -125,28 +125,28 @@ static int w90p910_dir_output(struct gpio_chip *chip, unsigned offset, int val)
 
 	__raw_writel(regval, outreg);
 
-	spin_unlock_irqrestore(&w90p910_gpio->gpio_lock, flags);
+	spin_unlock_irqrestore(&nuc900_gpio->gpio_lock, flags);
 
 	return 0;
 }
 
-static struct w90p910_gpio_chip w90p910_gpio[] = {
-	W90P910_GPIO_CHIP("GROUPC", 0, 16),
-	W90P910_GPIO_CHIP("GROUPD", 16, 10),
-	W90P910_GPIO_CHIP("GROUPE", 26, 14),
-	W90P910_GPIO_CHIP("GROUPF", 40, 10),
-	W90P910_GPIO_CHIP("GROUPG", 50, 17),
-	W90P910_GPIO_CHIP("GROUPH", 67, 8),
-	W90P910_GPIO_CHIP("GROUPI", 75, 17),
+static struct nuc900_gpio_chip nuc900_gpio[] = {
+	NUC900_GPIO_CHIP("GROUPC", 0, 16),
+	NUC900_GPIO_CHIP("GROUPD", 16, 10),
+	NUC900_GPIO_CHIP("GROUPE", 26, 14),
+	NUC900_GPIO_CHIP("GROUPF", 40, 10),
+	NUC900_GPIO_CHIP("GROUPG", 50, 17),
+	NUC900_GPIO_CHIP("GROUPH", 67, 8),
+	NUC900_GPIO_CHIP("GROUPI", 75, 17),
 };
 
-void __init w90p910_init_gpio(int nr_group)
+void __init nuc900_init_gpio(int nr_group)
 {
 	unsigned	i;
-	struct w90p910_gpio_chip *gpio_chip;
+	struct nuc900_gpio_chip *gpio_chip;
 
 	for (i = 0; i < nr_group; i++) {
-		gpio_chip = &w90p910_gpio[i];
+		gpio_chip = &nuc900_gpio[i];
 		spin_lock_init(&gpio_chip->gpio_lock);
 		gpio_chip->regbase = GPIO_BASE + i * GROUPINERV;
 		gpiochip_add(&gpio_chip->chip);
diff --git a/arch/arm/mach-w90x900/irq.c b/arch/arm/mach-w90x900/irq.c
index a296c9b81d2..0ce9d8e867e 100644
--- a/arch/arm/mach-w90x900/irq.c
+++ b/arch/arm/mach-w90x900/irq.c
@@ -36,13 +36,13 @@ struct group_irq {
 
 static DEFINE_SPINLOCK(groupirq_lock);
 
-#define DEFINE_GROUP(_name, _ctrlbit, _num)			\
-struct group_irq group_##_name = {				\
-		.enable		= w90x900_group_enable,		\
-		.gpen		= ((2 ^ _num) - 1) << _ctrlbit,	\
+#define DEFINE_GROUP(_name, _ctrlbit, _num)				\
+struct group_irq group_##_name = {					\
+		.enable		= nuc900_group_enable,			\
+		.gpen		= ((1 << _num) - 1) << _ctrlbit,	\
 	}
 
-static void w90x900_group_enable(struct group_irq *gpirq, int enable);
+static void nuc900_group_enable(struct group_irq *gpirq, int enable);
 
 static DEFINE_GROUP(nirq0, 0, 4);
 static DEFINE_GROUP(nirq1, 4, 4);
@@ -77,7 +77,7 @@ static void group_irq_disable(struct group_irq *group_irq)
 	spin_unlock_irqrestore(&groupirq_lock, flags);
 }
 
-static void w90x900_group_enable(struct group_irq *gpirq, int enable)
+static void nuc900_group_enable(struct group_irq *gpirq, int enable)
 {
 	unsigned int groupen = gpirq->gpen;
 	unsigned long regval;
@@ -92,7 +92,7 @@ static void w90x900_group_enable(struct group_irq *gpirq, int enable)
 	__raw_writel(regval, REG_AIC_GEN);
 }
 
-static void w90x900_irq_mask(unsigned int irq)
+static void nuc900_irq_mask(unsigned int irq)
 {
 	struct group_irq *group_irq;
 
@@ -143,12 +143,12 @@ static void w90x900_irq_mask(unsigned int irq)
  * to REG_AIC_EOSCR for ACK
  */
 
-static void w90x900_irq_ack(unsigned int irq)
+static void nuc900_irq_ack(unsigned int irq)
 {
 	__raw_writel(0x01, REG_AIC_EOSCR);
 }
 
-static void w90x900_irq_unmask(unsigned int irq)
+static void nuc900_irq_unmask(unsigned int irq)
 {
 	struct group_irq *group_irq;
 
@@ -194,20 +194,20 @@ static void w90x900_irq_unmask(unsigned int irq)
 		group_irq_enable(group_irq);
 }
 
-static struct irq_chip w90x900_irq_chip = {
-	.ack	   = w90x900_irq_ack,
-	.mask	   = w90x900_irq_mask,
-	.unmask	   = w90x900_irq_unmask,
+static struct irq_chip nuc900_irq_chip = {
+	.ack	   = nuc900_irq_ack,
+	.mask	   = nuc900_irq_mask,
+	.unmask	   = nuc900_irq_unmask,
 };
 
-void __init w90x900_init_irq(void)
+void __init nuc900_init_irq(void)
 {
 	int irqno;
 
 	__raw_writel(0xFFFFFFFE, REG_AIC_MDCR);
 
 	for (irqno = IRQ_WDT; irqno <= IRQ_ADC; irqno++) {
-		set_irq_chip(irqno, &w90x900_irq_chip);
+		set_irq_chip(irqno, &nuc900_irq_chip);
 		set_irq_handler(irqno, handle_level_irq);
 		set_irq_flags(irqno, IRQF_VALID);
 	}
diff --git a/arch/arm/mach-w90x900/mach-nuc910evb.c b/arch/arm/mach-w90x900/mach-nuc910evb.c
new file mode 100644
index 00000000000..ec05bda946f
--- /dev/null
+++ b/arch/arm/mach-w90x900/mach-nuc910evb.c
@@ -0,0 +1,44 @@
+/*
+ * linux/arch/arm/mach-w90x900/mach-nuc910evb.c
+ *
+ * Based on mach-s3c2410/mach-smdk2410.c by Jonas Dietsche
+ *
+ * Copyright (C) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach-types.h>
+#include <mach/map.h>
+
+#include "nuc910.h"
+
+static void __init nuc910evb_map_io(void)
+{
+	nuc910_map_io();
+	nuc910_init_clocks();
+}
+
+static void __init nuc910evb_init(void)
+{
+	nuc910_board_init();
+}
+
+MACHINE_START(W90P910EVB, "W90P910EVB")
+	/* Maintainer: Wan ZongShun */
+	.phys_io	= W90X900_PA_UART,
+	.io_pg_offst	= (((u32)W90X900_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= 0,
+	.map_io		= nuc910evb_map_io,
+	.init_irq	= nuc900_init_irq,
+	.init_machine	= nuc910evb_init,
+	.timer		= &nuc900_timer,
+MACHINE_END
diff --git a/arch/arm/mach-w90x900/mach-w90p910evb.c b/arch/arm/mach-w90x900/mach-w90p910evb.c
deleted file mode 100644
index 117578aed68..00000000000
--- a/arch/arm/mach-w90x900/mach-w90p910evb.c
+++ /dev/null
@@ -1,407 +0,0 @@
-/*
- * linux/arch/arm/mach-w90x900/mach-w90p910evb.c
- *
- * Based on mach-s3c2410/mach-smdk2410.c by Jonas Dietsche
- *
- * Copyright (C) 2008 Nuvoton technology corporation.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation;version 2 of the License.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach-types.h>
-
-#include <mach/regs-serial.h>
-#include <mach/map.h>
-
-#include "cpu.h"
-/*w90p910 evb norflash driver data */
-
-#define W90P910_FLASH_BASE	0xA0000000
-#define W90P910_FLASH_SIZE	0x400000
-#define SPIOFFSET		0x200
-#define SPIOREG_SIZE		0x100
-
-static struct mtd_partition w90p910_flash_partitions[] = {
-	{
-		.name	=	"NOR Partition 1 for kernel (960K)",
-		.size	=	0xF0000,
-		.offset	=	0x10000,
-	},
-	{
-		.name	=	"NOR Partition 2 for image (1M)",
-		.size	=	0x100000,
-		.offset	=	0x100000,
-	},
-	{
-		.name	=	"NOR Partition 3 for user (2M)",
-		.size	=	0x200000,
-		.offset	=	0x00200000,
-	}
-};
-
-static struct physmap_flash_data w90p910_flash_data = {
-	.width		=	2,
-	.parts		=	w90p910_flash_partitions,
-	.nr_parts	=	ARRAY_SIZE(w90p910_flash_partitions),
-};
-
-static struct resource w90p910_flash_resources[] = {
-	{
-		.start	=	W90P910_FLASH_BASE,
-		.end	=	W90P910_FLASH_BASE + W90P910_FLASH_SIZE - 1,
-		.flags	=	IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device w90p910_flash_device = {
-	.name		=	"physmap-flash",
-	.id		=	0,
-	.dev		= {
-				.platform_data = &w90p910_flash_data,
-			},
-	.resource	=	w90p910_flash_resources,
-	.num_resources	=	ARRAY_SIZE(w90p910_flash_resources),
-};
-
-/* USB EHCI Host Controller */
-
-static struct resource w90x900_usb_ehci_resource[] = {
-	[0] = {
-		.start = W90X900_PA_USBEHCIHOST,
-		.end   = W90X900_PA_USBEHCIHOST + W90X900_SZ_USBEHCIHOST - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_USBH,
-		.end   = IRQ_USBH,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-static u64 w90x900_device_usb_ehci_dmamask = 0xffffffffUL;
-
-struct platform_device w90x900_device_usb_ehci = {
-	.name		  = "w90x900-ehci",
-	.id		  = -1,
-	.num_resources	  = ARRAY_SIZE(w90x900_usb_ehci_resource),
-	.resource	  = w90x900_usb_ehci_resource,
-	.dev              = {
-		.dma_mask = &w90x900_device_usb_ehci_dmamask,
-		.coherent_dma_mask = 0xffffffffUL
-	}
-};
-EXPORT_SYMBOL(w90x900_device_usb_ehci);
-
-/* USB OHCI Host Controller */
-
-static struct resource w90x900_usb_ohci_resource[] = {
-	[0] = {
-		.start = W90X900_PA_USBOHCIHOST,
-		.end   = W90X900_PA_USBOHCIHOST + W90X900_SZ_USBOHCIHOST - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_USBH,
-		.end   = IRQ_USBH,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-static u64 w90x900_device_usb_ohci_dmamask = 0xffffffffUL;
-struct platform_device w90x900_device_usb_ohci = {
-	.name		  = "w90x900-ohci",
-	.id		  = -1,
-	.num_resources	  = ARRAY_SIZE(w90x900_usb_ohci_resource),
-	.resource	  = w90x900_usb_ohci_resource,
-	.dev              = {
-		.dma_mask = &w90x900_device_usb_ohci_dmamask,
-		.coherent_dma_mask = 0xffffffffUL
-	}
-};
-EXPORT_SYMBOL(w90x900_device_usb_ohci);
-
-/*TouchScreen controller*/
-
-static struct resource w90x900_ts_resource[] = {
-	[0] = {
-		.start = W90X900_PA_ADC,
-		.end   = W90X900_PA_ADC + W90X900_SZ_ADC-1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_ADC,
-		.end   = IRQ_ADC,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device w90x900_device_ts = {
-	.name		= "w90x900-ts",
-	.id		= -1,
-	.resource	= w90x900_ts_resource,
-	.num_resources	= ARRAY_SIZE(w90x900_ts_resource),
-};
-EXPORT_SYMBOL(w90x900_device_ts);
-
-/* RTC controller*/
-
-static struct resource w90x900_rtc_resource[] = {
-	[0] = {
-		.start = W90X900_PA_RTC,
-		.end   = W90X900_PA_RTC + 0xff,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_RTC,
-		.end   = IRQ_RTC,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device w90x900_device_rtc = {
-	.name		= "w90x900-rtc",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(w90x900_rtc_resource),
-	.resource	= w90x900_rtc_resource,
-};
-EXPORT_SYMBOL(w90x900_device_rtc);
-
-/* KPI controller*/
-
-static struct resource w90x900_kpi_resource[] = {
-	[0] = {
-		.start = W90X900_PA_KPI,
-		.end   = W90X900_PA_KPI + W90X900_SZ_KPI - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_KPI,
-		.end   = IRQ_KPI,
-		.flags = IORESOURCE_IRQ,
-	}
-
-};
-
-struct platform_device w90x900_device_kpi = {
-	.name		= "w90x900-kpi",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(w90x900_kpi_resource),
-	.resource	= w90x900_kpi_resource,
-};
-EXPORT_SYMBOL(w90x900_device_kpi);
-
-/* USB Device (Gadget)*/
-
-static struct resource w90x900_usbgadget_resource[] = {
-	[0] = {
-		.start = W90X900_PA_USBDEV,
-		.end   = W90X900_PA_USBDEV + W90X900_SZ_USBDEV - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_USBD,
-		.end   = IRQ_USBD,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-struct platform_device w90x900_device_usbgadget = {
-	.name		= "w90x900-usbgadget",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(w90x900_usbgadget_resource),
-	.resource	= w90x900_usbgadget_resource,
-};
-EXPORT_SYMBOL(w90x900_device_usbgadget);
-
-/* FMI Device */
-
-static struct resource w90p910_fmi_resource[] = {
-	[0] = {
-		.start = W90X900_PA_FMI,
-		.end   = W90X900_PA_FMI + W90X900_SZ_FMI - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_FMI,
-		.end   = IRQ_FMI,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-static struct platform_device w90p910_device_fmi = {
-	.name		= "w90p910-fmi",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(w90p910_fmi_resource),
-	.resource	= w90p910_fmi_resource,
-};
-
-/* MAC device */
-
-static struct resource w90x900_emc_resource[] = {
-	[0] = {
-		.start = W90X900_PA_EMC,
-		.end   = W90X900_PA_EMC + W90X900_SZ_EMC - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_EMCTX,
-		.end   = IRQ_EMCTX,
-		.flags = IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start = IRQ_EMCRX,
-		.end   = IRQ_EMCRX,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-static u64 w90x900_device_emc_dmamask = 0xffffffffUL;
-static struct platform_device w90p910_device_emc = {
-	.name		= "w90p910-emc",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(w90x900_emc_resource),
-	.resource	= w90x900_emc_resource,
-	.dev              = {
-		.dma_mask = &w90x900_device_emc_dmamask,
-		.coherent_dma_mask = 0xffffffffUL
-	}
-};
-
-/* SPI device */
-
-static struct resource w90p910_spi_resource[] = {
-	[0] = {
-		.start = W90X900_PA_I2C + SPIOFFSET,
-		.end   = W90X900_PA_I2C + SPIOFFSET + SPIOREG_SIZE - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_SSP,
-		.end   = IRQ_SSP,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-static struct platform_device w90p910_device_spi = {
-	.name		= "w90p910-spi",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(w90p910_spi_resource),
-	.resource	= w90p910_spi_resource,
-};
-
-/* spi device, spi flash info */
-
-static struct mtd_partition w90p910_spi_flash_partitions[] = {
-	{
-		.name = "bootloader(spi)",
-		.size = 0x0100000,
-		.offset = 0,
-	},
-};
-
-static struct flash_platform_data w90p910_spi_flash_data = {
-	.name = "m25p80",
-	.parts =  w90p910_spi_flash_partitions,
-	.nr_parts = ARRAY_SIZE(w90p910_spi_flash_partitions),
-	.type = "w25x16",
-};
-
-static struct spi_board_info w90p910_spi_board_info[] __initdata = {
-	{
-		.modalias = "m25p80",
-		.max_speed_hz = 20000000,
-		.bus_num = 0,
-		.chip_select = 1,
-		.platform_data = &w90p910_spi_flash_data,
-		.mode = SPI_MODE_0,
-	},
-};
-
-/* WDT Device */
-
-static struct resource w90p910_wdt_resource[] = {
-	[0] = {
-		.start = W90X900_PA_TIMER,
-		.end   = W90X900_PA_TIMER + W90X900_SZ_TIMER - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_WDT,
-		.end   = IRQ_WDT,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-static struct platform_device w90p910_device_wdt = {
-	.name		= "w90p910-wdt",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(w90p910_wdt_resource),
-	.resource	= w90p910_wdt_resource,
-};
-
-static struct map_desc w90p910_iodesc[] __initdata = {
-};
-
-/*Here should be your evb resourse,such as LCD*/
-
-static struct platform_device *w90p910evb_dev[] __initdata = {
-	&w90p910_serial_device,
-	&w90p910_flash_device,
-	&w90x900_device_usb_ehci,
-	&w90x900_device_usb_ohci,
-	&w90x900_device_ts,
-	&w90x900_device_rtc,
-	&w90x900_device_kpi,
-	&w90x900_device_usbgadget,
-	&w90p910_device_fmi,
-	&w90p910_device_emc,
-	&w90p910_device_spi,
-	&w90p910_device_wdt,
-};
-
-static void __init w90p910evb_map_io(void)
-{
-	w90p910_map_io(w90p910_iodesc, ARRAY_SIZE(w90p910_iodesc));
-	w90p910_init_clocks();
-}
-
-static void __init w90p910evb_init(void)
-{
-	platform_add_devices(w90p910evb_dev, ARRAY_SIZE(w90p910evb_dev));
-	spi_register_board_info(w90p910_spi_board_info,
-					ARRAY_SIZE(w90p910_spi_board_info));
-}
-
-MACHINE_START(W90P910EVB, "W90P910EVB")
-	/* Maintainer: Wan ZongShun */
-	.phys_io	= W90X900_PA_UART,
-	.io_pg_offst	= (((u32)W90X900_VA_UART) >> 18) & 0xfffc,
-	.boot_params	= 0,
-	.map_io		= w90p910evb_map_io,
-	.init_irq	= w90x900_init_irq,
-	.init_machine	= w90p910evb_init,
-	.timer		= &w90x900_timer,
-MACHINE_END
diff --git a/arch/arm/mach-w90x900/mfp-w90p910.c b/arch/arm/mach-w90x900/mfp-w90p910.c
deleted file mode 100644
index 4533098a0ee..00000000000
--- a/arch/arm/mach-w90x900/mfp-w90p910.c
+++ /dev/null
@@ -1,158 +0,0 @@
-/*
- * linux/arch/arm/mach-w90x900/mfp-w90p910.c
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation;version 2 of the License.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/string.h>
-#include <linux/clk.h>
-#include <linux/mutex.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-
-#define REG_MFSEL	(W90X900_VA_GCR + 0xC)
-
-#define GPSELF		(0x01 << 1)
-
-#define GPSELC		(0x03 << 2)
-#define ENKPI		(0x02 << 2)
-#define ENNAND		(0x01 << 2)
-
-#define GPSELEI0	(0x01 << 26)
-#define GPSELEI1	(0x01 << 27)
-
-#define GPIOG0TO1	(0x03 << 14)
-#define GPIOG2TO3	(0x03 << 16)
-#define ENSPI		(0x0a << 14)
-#define ENI2C0		(0x01 << 14)
-#define ENI2C1		(0x01 << 16)
-
-static DEFINE_MUTEX(mfp_mutex);
-
-void mfp_set_groupf(struct device *dev)
-{
-	unsigned long mfpen;
-	const char *dev_id;
-
-	BUG_ON(!dev);
-
-	mutex_lock(&mfp_mutex);
-
-	dev_id = dev_name(dev);
-
-	mfpen = __raw_readl(REG_MFSEL);
-
-	if (strcmp(dev_id, "w90p910-emc") == 0)
-		mfpen |= GPSELF;/*enable mac*/
-	else
-		mfpen &= ~GPSELF;/*GPIOF[9:0]*/
-
-	__raw_writel(mfpen, REG_MFSEL);
-
-	mutex_unlock(&mfp_mutex);
-}
-EXPORT_SYMBOL(mfp_set_groupf);
-
-void mfp_set_groupc(struct device *dev)
-{
-	unsigned long mfpen;
-	const char *dev_id;
-
-	BUG_ON(!dev);
-
-	mutex_lock(&mfp_mutex);
-
-	dev_id = dev_name(dev);
-
-	mfpen = __raw_readl(REG_MFSEL);
-
-	if (strcmp(dev_id, "w90p910-lcd") == 0)
-		mfpen |= GPSELC;/*enable lcd*/
-	else if (strcmp(dev_id, "w90p910-kpi") == 0) {
-			mfpen &= (~GPSELC);/*enable kpi*/
-			mfpen |= ENKPI;
-		} else if (strcmp(dev_id, "w90p910-nand") == 0) {
-				mfpen &= (~GPSELC);/*enable nand*/
-				mfpen |= ENNAND;
-			} else
-				mfpen &= (~GPSELC);/*GPIOC[14:0]*/
-
-	__raw_writel(mfpen, REG_MFSEL);
-
-	mutex_unlock(&mfp_mutex);
-}
-EXPORT_SYMBOL(mfp_set_groupc);
-
-void mfp_set_groupi(struct device *dev)
-{
-	unsigned long mfpen;
-	const char *dev_id;
-
-	BUG_ON(!dev);
-
-	mutex_lock(&mfp_mutex);
-
-	dev_id = dev_name(dev);
-
-	mfpen = __raw_readl(REG_MFSEL);
-
-	mfpen &= ~GPSELEI1;/*default gpio16*/
-
-	if (strcmp(dev_id, "w90p910-wdog") == 0)
-		mfpen |= GPSELEI1;/*enable wdog*/
-		else if (strcmp(dev_id, "w90p910-atapi") == 0)
-			mfpen |= GPSELEI0;/*enable atapi*/
-			else if (strcmp(dev_id, "w90p910-keypad") == 0)
-				mfpen &= ~GPSELEI0;/*enable keypad*/
-
-	__raw_writel(mfpen, REG_MFSEL);
-
-	mutex_unlock(&mfp_mutex);
-}
-EXPORT_SYMBOL(mfp_set_groupi);
-
-void mfp_set_groupg(struct device *dev)
-{
-	unsigned long mfpen;
-	const char *dev_id;
-
-	BUG_ON(!dev);
-
-	mutex_lock(&mfp_mutex);
-
-	dev_id = dev_name(dev);
-
-	mfpen = __raw_readl(REG_MFSEL);
-
-	if (strcmp(dev_id, "w90p910-spi") == 0) {
-		mfpen &= ~(GPIOG0TO1 | GPIOG2TO3);
-		mfpen |= ENSPI;/*enable spi*/
-	} else if (strcmp(dev_id, "w90p910-i2c0") == 0) {
-		mfpen &= ~(GPIOG0TO1);
-		mfpen |= ENI2C0;/*enable i2c0*/
-	} else if (strcmp(dev_id, "w90p910-i2c1") == 0) {
-		mfpen &= ~(GPIOG2TO3);
-		mfpen |= ENI2C1;/*enable i2c1*/
-	} else {
-		mfpen &= ~(GPIOG0TO1 | GPIOG2TO3);/*GPIOG[3:0]*/
-	}
-
-	__raw_writel(mfpen, REG_MFSEL);
-
-	mutex_unlock(&mfp_mutex);
-}
-EXPORT_SYMBOL(mfp_set_groupg);
-
diff --git a/arch/arm/mach-w90x900/mfp.c b/arch/arm/mach-w90x900/mfp.c
new file mode 100644
index 00000000000..a47dc9a708e
--- /dev/null
+++ b/arch/arm/mach-w90x900/mfp.c
@@ -0,0 +1,158 @@
+/*
+ * linux/arch/arm/mach-w90x900/mfp.c
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/clk.h>
+#include <linux/mutex.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+
+#define REG_MFSEL	(W90X900_VA_GCR + 0xC)
+
+#define GPSELF		(0x01 << 1)
+
+#define GPSELC		(0x03 << 2)
+#define ENKPI		(0x02 << 2)
+#define ENNAND		(0x01 << 2)
+
+#define GPSELEI0	(0x01 << 26)
+#define GPSELEI1	(0x01 << 27)
+
+#define GPIOG0TO1	(0x03 << 14)
+#define GPIOG2TO3	(0x03 << 16)
+#define ENSPI		(0x0a << 14)
+#define ENI2C0		(0x01 << 14)
+#define ENI2C1		(0x01 << 16)
+
+static DEFINE_MUTEX(mfp_mutex);
+
+void mfp_set_groupf(struct device *dev)
+{
+	unsigned long mfpen;
+	const char *dev_id;
+
+	BUG_ON(!dev);
+
+	mutex_lock(&mfp_mutex);
+
+	dev_id = dev_name(dev);
+
+	mfpen = __raw_readl(REG_MFSEL);
+
+	if (strcmp(dev_id, "nuc900-emc") == 0)
+		mfpen |= GPSELF;/*enable mac*/
+	else
+		mfpen &= ~GPSELF;/*GPIOF[9:0]*/
+
+	__raw_writel(mfpen, REG_MFSEL);
+
+	mutex_unlock(&mfp_mutex);
+}
+EXPORT_SYMBOL(mfp_set_groupf);
+
+void mfp_set_groupc(struct device *dev)
+{
+	unsigned long mfpen;
+	const char *dev_id;
+
+	BUG_ON(!dev);
+
+	mutex_lock(&mfp_mutex);
+
+	dev_id = dev_name(dev);
+
+	mfpen = __raw_readl(REG_MFSEL);
+
+	if (strcmp(dev_id, "nuc900-lcd") == 0)
+		mfpen |= GPSELC;/*enable lcd*/
+	else if (strcmp(dev_id, "nuc900-kpi") == 0) {
+		mfpen &= (~GPSELC);/*enable kpi*/
+		mfpen |= ENKPI;
+	} else if (strcmp(dev_id, "nuc900-nand") == 0) {
+		mfpen &= (~GPSELC);/*enable nand*/
+		mfpen |= ENNAND;
+	} else
+		mfpen &= (~GPSELC);/*GPIOC[14:0]*/
+
+	__raw_writel(mfpen, REG_MFSEL);
+
+	mutex_unlock(&mfp_mutex);
+}
+EXPORT_SYMBOL(mfp_set_groupc);
+
+void mfp_set_groupi(struct device *dev)
+{
+	unsigned long mfpen;
+	const char *dev_id;
+
+	BUG_ON(!dev);
+
+	mutex_lock(&mfp_mutex);
+
+	dev_id = dev_name(dev);
+
+	mfpen = __raw_readl(REG_MFSEL);
+
+	mfpen &= ~GPSELEI1;/*default gpio16*/
+
+	if (strcmp(dev_id, "nuc900-wdog") == 0)
+		mfpen |= GPSELEI1;/*enable wdog*/
+	else if (strcmp(dev_id, "nuc900-atapi") == 0)
+		mfpen |= GPSELEI0;/*enable atapi*/
+	else if (strcmp(dev_id, "nuc900-keypad") == 0)
+		mfpen &= ~GPSELEI0;/*enable keypad*/
+
+	__raw_writel(mfpen, REG_MFSEL);
+
+	mutex_unlock(&mfp_mutex);
+}
+EXPORT_SYMBOL(mfp_set_groupi);
+
+void mfp_set_groupg(struct device *dev)
+{
+	unsigned long mfpen;
+	const char *dev_id;
+
+	BUG_ON(!dev);
+
+	mutex_lock(&mfp_mutex);
+
+	dev_id = dev_name(dev);
+
+	mfpen = __raw_readl(REG_MFSEL);
+
+	if (strcmp(dev_id, "nuc900-spi") == 0) {
+		mfpen &= ~(GPIOG0TO1 | GPIOG2TO3);
+		mfpen |= ENSPI;/*enable spi*/
+	} else if (strcmp(dev_id, "nuc900-i2c0") == 0) {
+		mfpen &= ~(GPIOG0TO1);
+		mfpen |= ENI2C0;/*enable i2c0*/
+	} else if (strcmp(dev_id, "nuc900-i2c1") == 0) {
+		mfpen &= ~(GPIOG2TO3);
+		mfpen |= ENI2C1;/*enable i2c1*/
+	} else {
+		mfpen &= ~(GPIOG0TO1 | GPIOG2TO3);/*GPIOG[3:0]*/
+	}
+
+	__raw_writel(mfpen, REG_MFSEL);
+
+	mutex_unlock(&mfp_mutex);
+}
+EXPORT_SYMBOL(mfp_set_groupg);
+
diff --git a/arch/arm/mach-w90x900/nuc910.c b/arch/arm/mach-w90x900/nuc910.c
new file mode 100644
index 00000000000..656f03b3b62
--- /dev/null
+++ b/arch/arm/mach-w90x900/nuc910.c
@@ -0,0 +1,60 @@
+/*
+ * linux/arch/arm/mach-w90x900/nuc910.c
+ *
+ * Based on linux/arch/arm/plat-s3c24xx/s3c244x.c by Ben Dooks
+ *
+ * Copyright (c) 2009 Nuvoton corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * NUC910 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <asm/mach/map.h>
+#include <mach/hardware.h>
+#include "cpu.h"
+#include "clock.h"
+
+/* define specific CPU platform device */
+
+static struct platform_device *nuc910_dev[] __initdata = {
+	&nuc900_device_ts,
+	&nuc900_device_rtc,
+};
+
+/* define specific CPU platform io map */
+
+static struct map_desc nuc910evb_iodesc[] __initdata = {
+	IODESC_ENT(USBEHCIHOST),
+	IODESC_ENT(USBOHCIHOST),
+	IODESC_ENT(KPI),
+	IODESC_ENT(USBDEV),
+	IODESC_ENT(ADC),
+};
+
+/*Init NUC910 evb io*/
+
+void __init nuc910_map_io(void)
+{
+	nuc900_map_io(nuc910evb_iodesc, ARRAY_SIZE(nuc910evb_iodesc));
+}
+
+/*Init NUC910 clock*/
+
+void __init nuc910_init_clocks(void)
+{
+	nuc900_init_clocks();
+}
+
+/*Init NUC910 board info*/
+
+void __init nuc910_board_init(void)
+{
+	nuc900_board_init(nuc910_dev, ARRAY_SIZE(nuc910_dev));
+}
diff --git a/arch/arm/mach-w90x900/nuc910.h b/arch/arm/mach-w90x900/nuc910.h
new file mode 100644
index 00000000000..83e9ba5fc26
--- /dev/null
+++ b/arch/arm/mach-w90x900/nuc910.h
@@ -0,0 +1,28 @@
+/*
+ * arch/arm/mach-w90x900/nuc910.h
+ *
+ * Copyright (c) 2008 Nuvoton corporation
+ *
+ * Header file for NUC900 CPU support
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+struct map_desc;
+struct sys_timer;
+
+/* core initialisation functions */
+
+extern void nuc900_init_irq(void);
+extern struct sys_timer nuc900_timer;
+
+/* extern file from nuc910.c */
+
+extern void nuc910_board_init(void);
+extern void nuc910_init_clocks(void);
+extern void nuc910_map_io(void);
diff --git a/arch/arm/mach-w90x900/time.c b/arch/arm/mach-w90x900/time.c
index 5e06770e601..4128af870b4 100644
--- a/arch/arm/mach-w90x900/time.c
+++ b/arch/arm/mach-w90x900/time.c
@@ -44,7 +44,7 @@
 
 unsigned int timer0_load;
 
-static void w90p910_clockevent_setmode(enum clock_event_mode mode,
+static void nuc900_clockevent_setmode(enum clock_event_mode mode,
 		struct clock_event_device *clk)
 {
 	unsigned int val;
@@ -71,7 +71,7 @@ static void w90p910_clockevent_setmode(enum clock_event_mode mode,
 	__raw_writel(val, REG_TCSR0);
 }
 
-static int w90p910_clockevent_setnextevent(unsigned long evt,
+static int nuc900_clockevent_setnextevent(unsigned long evt,
 		struct clock_event_device *clk)
 {
 	unsigned int val;
@@ -85,20 +85,20 @@ static int w90p910_clockevent_setnextevent(unsigned long evt,
 	return 0;
 }
 
-static struct clock_event_device w90p910_clockevent_device = {
-	.name		= "w90p910-timer0",
+static struct clock_event_device nuc900_clockevent_device = {
+	.name		= "nuc900-timer0",
 	.shift		= 32,
 	.features	= CLOCK_EVT_MODE_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.set_mode	= w90p910_clockevent_setmode,
-	.set_next_event	= w90p910_clockevent_setnextevent,
+	.set_mode	= nuc900_clockevent_setmode,
+	.set_next_event	= nuc900_clockevent_setnextevent,
 	.rating		= 300,
 };
 
 /*IRQ handler for the timer*/
 
-static irqreturn_t w90p910_timer0_interrupt(int irq, void *dev_id)
+static irqreturn_t nuc900_timer0_interrupt(int irq, void *dev_id)
 {
-	struct clock_event_device *evt = &w90p910_clockevent_device;
+	struct clock_event_device *evt = &nuc900_clockevent_device;
 
 	__raw_writel(0x01, REG_TISR); /* clear TIF0 */
 
@@ -106,40 +106,40 @@ static irqreturn_t w90p910_timer0_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction w90p910_timer0_irq = {
-	.name		= "w90p910-timer0",
+static struct irqaction nuc900_timer0_irq = {
+	.name		= "nuc900-timer0",
 	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= w90p910_timer0_interrupt,
+	.handler	= nuc900_timer0_interrupt,
 };
 
-static void __init w90p910_clockevents_init(unsigned int rate)
+static void __init nuc900_clockevents_init(unsigned int rate)
 {
-	w90p910_clockevent_device.mult = div_sc(rate, NSEC_PER_SEC,
-					w90p910_clockevent_device.shift);
-	w90p910_clockevent_device.max_delta_ns = clockevent_delta2ns(0xffffffff,
-					&w90p910_clockevent_device);
-	w90p910_clockevent_device.min_delta_ns = clockevent_delta2ns(0xf,
-					&w90p910_clockevent_device);
-	w90p910_clockevent_device.cpumask = cpumask_of(0);
-
-	clockevents_register_device(&w90p910_clockevent_device);
+	nuc900_clockevent_device.mult = div_sc(rate, NSEC_PER_SEC,
+					nuc900_clockevent_device.shift);
+	nuc900_clockevent_device.max_delta_ns = clockevent_delta2ns(0xffffffff,
+					&nuc900_clockevent_device);
+	nuc900_clockevent_device.min_delta_ns = clockevent_delta2ns(0xf,
+					&nuc900_clockevent_device);
+	nuc900_clockevent_device.cpumask = cpumask_of(0);
+
+	clockevents_register_device(&nuc900_clockevent_device);
 }
 
-static cycle_t w90p910_get_cycles(struct clocksource *cs)
+static cycle_t nuc900_get_cycles(struct clocksource *cs)
 {
 	return ~__raw_readl(REG_TDR1);
 }
 
-static struct clocksource clocksource_w90p910 = {
-	.name	= "w90p910-timer1",
+static struct clocksource clocksource_nuc900 = {
+	.name	= "nuc900-timer1",
 	.rating	= 200,
-	.read	= w90p910_get_cycles,
+	.read	= nuc900_get_cycles,
 	.mask	= CLOCKSOURCE_MASK(32),
 	.shift	= 20,
 	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
-static void __init w90p910_clocksource_init(unsigned int rate)
+static void __init nuc900_clocksource_init(unsigned int rate)
 {
 	unsigned int val;
 
@@ -149,12 +149,12 @@ static void __init w90p910_clocksource_init(unsigned int rate)
 	val |= (COUNTEN | PERIOD);
 	__raw_writel(val, REG_TCSR1);
 
-	clocksource_w90p910.mult =
-		clocksource_khz2mult((rate / 1000), clocksource_w90p910.shift);
-	clocksource_register(&clocksource_w90p910);
+	clocksource_nuc900.mult =
+		clocksource_khz2mult((rate / 1000), clocksource_nuc900.shift);
+	clocksource_register(&clocksource_nuc900);
 }
 
-static void __init w90p910_timer_init(void)
+static void __init nuc900_timer_init(void)
 {
 	struct clk *ck_ext = clk_get(NULL, "ext");
 	unsigned int	rate;
@@ -171,12 +171,12 @@ static void __init w90p910_timer_init(void)
 	__raw_writel(RESETINT, REG_TISR);
 	timer0_load = (rate / TICKS_PER_SEC);
 
-	setup_irq(IRQ_TIMER0, &w90p910_timer0_irq);
+	setup_irq(IRQ_TIMER0, &nuc900_timer0_irq);
 
-	w90p910_clocksource_init(rate);
-	w90p910_clockevents_init(rate);
+	nuc900_clocksource_init(rate);
+	nuc900_clockevents_init(rate);
 }
 
-struct sys_timer w90x900_timer = {
-	.init		= w90p910_timer_init,
+struct sys_timer nuc900_timer = {
+	.init		= nuc900_timer_init,
 };
diff --git a/arch/arm/mach-w90x900/w90p910.c b/arch/arm/mach-w90x900/w90p910.c
deleted file mode 100644
index d33723b69d1..00000000000
--- a/arch/arm/mach-w90x900/w90p910.c
+++ /dev/null
@@ -1,224 +0,0 @@
-/*
- * linux/arch/arm/mach-w90x900/w90p910.c
- *
- * Based on linux/arch/arm/plat-s3c24xx/s3c244x.c by Ben Dooks
- *
- * Copyright (c) 2008 Nuvoton technology corporation.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * W90P910 cpu support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation;version 2 of the License.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/serial_8250.h>
-#include <linux/delay.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/regs-serial.h>
-#include <mach/regs-clock.h>
-#include <mach/regs-ebi.h>
-
-#include "cpu.h"
-#include "clock.h"
-
-/* Initial IO mappings */
-
-static struct map_desc w90p910_iodesc[] __initdata = {
-	IODESC_ENT(IRQ),
-	IODESC_ENT(GCR),
-	IODESC_ENT(UART),
-	IODESC_ENT(TIMER),
-	IODESC_ENT(EBI),
-	IODESC_ENT(USBEHCIHOST),
-	IODESC_ENT(USBOHCIHOST),
-	IODESC_ENT(ADC),
-	IODESC_ENT(RTC),
-	IODESC_ENT(KPI),
-	IODESC_ENT(USBDEV),
-	/*IODESC_ENT(LCD),*/
-};
-
-/* Initial clock declarations. */
-static DEFINE_CLK(lcd, 0);
-static DEFINE_CLK(audio, 1);
-static DEFINE_CLK(fmi, 4);
-static DEFINE_SUBCLK(ms, 0);
-static DEFINE_SUBCLK(sd, 1);
-static DEFINE_CLK(dmac, 5);
-static DEFINE_CLK(atapi, 6);
-static DEFINE_CLK(emc, 7);
-static DEFINE_SUBCLK(rmii, 2);
-static DEFINE_CLK(usbd, 8);
-static DEFINE_CLK(usbh, 9);
-static DEFINE_CLK(g2d, 10);;
-static DEFINE_CLK(pwm, 18);
-static DEFINE_CLK(ps2, 24);
-static DEFINE_CLK(kpi, 25);
-static DEFINE_CLK(wdt, 26);
-static DEFINE_CLK(gdma, 27);
-static DEFINE_CLK(adc, 28);
-static DEFINE_CLK(usi, 29);
-static DEFINE_CLK(ext, 0);
-
-static struct clk_lookup w90p910_clkregs[] = {
-	DEF_CLKLOOK(&clk_lcd, "w90p910-lcd", NULL),
-	DEF_CLKLOOK(&clk_audio, "w90p910-audio", NULL),
-	DEF_CLKLOOK(&clk_fmi, "w90p910-fmi", NULL),
-	DEF_CLKLOOK(&clk_ms, "w90p910-fmi", "MS"),
-	DEF_CLKLOOK(&clk_sd, "w90p910-fmi", "SD"),
-	DEF_CLKLOOK(&clk_dmac, "w90p910-dmac", NULL),
-	DEF_CLKLOOK(&clk_atapi, "w90p910-atapi", NULL),
-	DEF_CLKLOOK(&clk_emc, "w90p910-emc", NULL),
-	DEF_CLKLOOK(&clk_rmii, "w90p910-emc", "RMII"),
-	DEF_CLKLOOK(&clk_usbd, "w90p910-usbd", NULL),
-	DEF_CLKLOOK(&clk_usbh, "w90p910-usbh", NULL),
-	DEF_CLKLOOK(&clk_g2d, "w90p910-g2d", NULL),
-	DEF_CLKLOOK(&clk_pwm, "w90p910-pwm", NULL),
-	DEF_CLKLOOK(&clk_ps2, "w90p910-ps2", NULL),
-	DEF_CLKLOOK(&clk_kpi, "w90p910-kpi", NULL),
-	DEF_CLKLOOK(&clk_wdt, "w90p910-wdt", NULL),
-	DEF_CLKLOOK(&clk_gdma, "w90p910-gdma", NULL),
-	DEF_CLKLOOK(&clk_adc, "w90p910-adc", NULL),
-	DEF_CLKLOOK(&clk_usi, "w90p910-spi", NULL),
-	DEF_CLKLOOK(&clk_ext, NULL, "ext"),
-};
-
-/* Initial serial platform data */
-
-struct plat_serial8250_port w90p910_uart_data[] = {
-	W90X900_8250PORT(UART0),
-};
-
-struct platform_device w90p910_serial_device = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev			= {
-		.platform_data	= w90p910_uart_data,
-	},
-};
-
-/*Init W90P910 evb io*/
-
-void __init w90p910_map_io(struct map_desc *mach_desc, int mach_size)
-{
-	unsigned long idcode = 0x0;
-
-	iotable_init(w90p910_iodesc, ARRAY_SIZE(w90p910_iodesc));
-
-	idcode = __raw_readl(W90X900PDID);
-	if (idcode != W90P910_CPUID)
-		printk(KERN_ERR "CPU type 0x%08lx is not W90P910\n", idcode);
-}
-
-/*Set W90P910 cpu frequence*/
-static int __init w90p910_set_clkval(unsigned int cpufreq)
-{
-	unsigned int pllclk, ahbclk, apbclk, val;
-
-	pllclk = 0;
-	ahbclk = 0;
-	apbclk = 0;
-
-	switch (cpufreq) {
-	case 66:
-		pllclk = PLL_66MHZ;
-		ahbclk = AHB_CPUCLK_1_1;
-		apbclk = APB_AHB_1_2;
-		break;
-
-	case 100:
-		pllclk = PLL_100MHZ;
-		ahbclk = AHB_CPUCLK_1_1;
-		apbclk = APB_AHB_1_2;
-		break;
-
-	case 120:
-		pllclk = PLL_120MHZ;
-		ahbclk = AHB_CPUCLK_1_2;
-		apbclk = APB_AHB_1_2;
-		break;
-
-	case 166:
-		pllclk = PLL_166MHZ;
-		ahbclk = AHB_CPUCLK_1_2;
-		apbclk = APB_AHB_1_2;
-		break;
-
-	case 200:
-		pllclk = PLL_200MHZ;
-		ahbclk = AHB_CPUCLK_1_2;
-		apbclk = APB_AHB_1_2;
-		break;
-	}
-
-	__raw_writel(pllclk, REG_PLLCON0);
-
-	val = __raw_readl(REG_CLKDIV);
-	val &= ~(0x03 << 24 | 0x03 << 26);
-	val |= (ahbclk << 24 | apbclk << 26);
-	__raw_writel(val, REG_CLKDIV);
-
-	return 	0;
-}
-static int __init w90p910_set_cpufreq(char *str)
-{
-	unsigned long cpufreq, val;
-
-	if (!*str)
-		return 0;
-
-	strict_strtoul(str, 0, &cpufreq);
-
-	w90p910_clock_source(NULL, "ext");
-
-	w90p910_set_clkval(cpufreq);
-
-	mdelay(1);
-
-	val = __raw_readl(REG_CKSKEW);
-	val &= ~0xff;
-	val |= DEFAULTSKEW;
-	__raw_writel(val, REG_CKSKEW);
-
-	w90p910_clock_source(NULL, "pll0");
-
-	return 1;
-}
-
-__setup("cpufreq=", w90p910_set_cpufreq);
-
-/*Init W90P910 clock*/
-
-void __init w90p910_init_clocks(void)
-{
-	clks_register(w90p910_clkregs, ARRAY_SIZE(w90p910_clkregs));
-}
-
-static int __init w90p910_init_cpu(void)
-{
-	return 0;
-}
-
-static int __init w90x900_arch_init(void)
-{
-	return w90p910_init_cpu();
-}
-arch_initcall(w90x900_arch_init);
-- 
cgit v1.2.3


From 936fbe9efc96d40c8cdc23bba31a3beaad4f96c1 Mon Sep 17 00:00:00 2001
From: wanzongshun <mcuos.com@gmail.com>
Date: Fri, 21 Aug 2009 07:08:24 +0100
Subject: ARM: 5683/1: Add nuc950 platform to w90x900

Add nuc950 platform to w90x900.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-w90x900/Kconfig          | 15 ++++++++++
 arch/arm/mach-w90x900/Makefile         |  2 ++
 arch/arm/mach-w90x900/mach-nuc950evb.c | 44 +++++++++++++++++++++++++++
 arch/arm/mach-w90x900/nuc950.c         | 54 ++++++++++++++++++++++++++++++++++
 arch/arm/mach-w90x900/nuc950.h         | 28 ++++++++++++++++++
 5 files changed, 143 insertions(+)
 create mode 100644 arch/arm/mach-w90x900/mach-nuc950evb.c
 create mode 100644 arch/arm/mach-w90x900/nuc950.c
 create mode 100644 arch/arm/mach-w90x900/nuc950.h

(limited to 'arch')

diff --git a/arch/arm/mach-w90x900/Kconfig b/arch/arm/mach-w90x900/Kconfig
index 8e4178fe5ec..163b8010e57 100644
--- a/arch/arm/mach-w90x900/Kconfig
+++ b/arch/arm/mach-w90x900/Kconfig
@@ -5,6 +5,11 @@ config CPU_W90P910
 	help
 	  Support for W90P910 of Nuvoton W90X900 CPUs.
 
+config CPU_NUC950
+	bool
+	help
+	  Support for NUCP950 of Nuvoton NUC900 CPUs.
+
 menu "W90P910 Machines"
 
 config MACH_W90P910EVB
@@ -16,4 +21,14 @@ config MACH_W90P910EVB
 
 endmenu
 
+menu "NUC950 Machines"
+
+config MACH_W90P950EVB
+	bool "Nuvoton NUC950 Evaluation Board"
+	select CPU_NUC950
+	help
+	   Say Y here if you are using the Nuvoton NUC950EVB
+
+endmenu
+
 endif
diff --git a/arch/arm/mach-w90x900/Makefile b/arch/arm/mach-w90x900/Makefile
index e38aa328e60..a4622b577a2 100644
--- a/arch/arm/mach-w90x900/Makefile
+++ b/arch/arm/mach-w90x900/Makefile
@@ -9,7 +9,9 @@ obj-y				+= clksel.o dev.o cpu.o
 # W90X900 CPU support files
 
 obj-$(CONFIG_CPU_W90P910)	+= nuc910.o
+obj-$(CONFIG_CPU_NUC950)	+= nuc950.o
 
 # machine support
 
 obj-$(CONFIG_MACH_W90P910EVB)	+= mach-nuc910evb.o
+obj-$(CONFIG_MACH_W90P950EVB)	+= mach-nuc950evb.o
diff --git a/arch/arm/mach-w90x900/mach-nuc950evb.c b/arch/arm/mach-w90x900/mach-nuc950evb.c
new file mode 100644
index 00000000000..cef903bcccd
--- /dev/null
+++ b/arch/arm/mach-w90x900/mach-nuc950evb.c
@@ -0,0 +1,44 @@
+/*
+ * linux/arch/arm/mach-w90x900/mach-nuc950evb.c
+ *
+ * Based on mach-s3c2410/mach-smdk2410.c by Jonas Dietsche
+ *
+ * Copyright (C) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach-types.h>
+#include <mach/map.h>
+
+#include "nuc950.h"
+
+static void __init nuc950evb_map_io(void)
+{
+	nuc950_map_io();
+	nuc950_init_clocks();
+}
+
+static void __init nuc950evb_init(void)
+{
+	nuc950_board_init();
+}
+
+MACHINE_START(W90P950EVB, "W90P950EVB")
+	/* Maintainer: Wan ZongShun */
+	.phys_io	= W90X900_PA_UART,
+	.io_pg_offst	= (((u32)W90X900_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= 0,
+	.map_io		= nuc950evb_map_io,
+	.init_irq	= nuc900_init_irq,
+	.init_machine	= nuc950evb_init,
+	.timer		= &nuc900_timer,
+MACHINE_END
diff --git a/arch/arm/mach-w90x900/nuc950.c b/arch/arm/mach-w90x900/nuc950.c
new file mode 100644
index 00000000000..149508116d1
--- /dev/null
+++ b/arch/arm/mach-w90x900/nuc950.c
@@ -0,0 +1,54 @@
+/*
+ * linux/arch/arm/mach-w90x900/nuc950.c
+ *
+ * Based on linux/arch/arm/plat-s3c24xx/s3c244x.c by Ben Dooks
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * NUC950 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <asm/mach/map.h>
+#include <mach/hardware.h>
+#include "cpu.h"
+
+/* define specific CPU platform device */
+
+static struct platform_device *nuc950_dev[] __initdata = {
+	&nuc900_device_kpi,
+	&nuc900_device_fmi,
+};
+
+/* define specific CPU platform io map */
+
+static struct map_desc nuc950evb_iodesc[] __initdata = {
+};
+
+/*Init NUC950 evb io*/
+
+void __init nuc950_map_io(void)
+{
+	nuc900_map_io(nuc950evb_iodesc, ARRAY_SIZE(nuc950evb_iodesc));
+}
+
+/*Init NUC950 clock*/
+
+void __init nuc950_init_clocks(void)
+{
+	nuc900_init_clocks();
+}
+
+/*Init NUC950 board info*/
+
+void __init nuc950_board_init(void)
+{
+	nuc900_board_init(nuc950_dev, ARRAY_SIZE(nuc950_dev));
+}
diff --git a/arch/arm/mach-w90x900/nuc950.h b/arch/arm/mach-w90x900/nuc950.h
new file mode 100644
index 00000000000..98a1148bc5a
--- /dev/null
+++ b/arch/arm/mach-w90x900/nuc950.h
@@ -0,0 +1,28 @@
+/*
+ * arch/arm/mach-w90x900/nuc950.h
+ *
+ * Copyright (c) 2008 Nuvoton corporation
+ *
+ * Header file for NUC900 CPU support
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+struct map_desc;
+struct sys_timer;
+
+/* core initialisation functions */
+
+extern void nuc900_init_irq(void);
+extern struct sys_timer nuc900_timer;
+
+/* extern file from nuc950.c */
+
+extern void nuc950_board_init(void);
+extern void nuc950_init_clocks(void);
+extern void nuc950_map_io(void);
-- 
cgit v1.2.3


From 8e22676e56673494a15ba95b57af21eb47d8b98a Mon Sep 17 00:00:00 2001
From: wanzongshun <mcuos.com@gmail.com>
Date: Fri, 21 Aug 2009 07:09:03 +0100
Subject: ARM: 5684/1: Add nuc960 platform to w90x900

Add nuc960 platform to w90x900.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-w90x900/Kconfig          | 15 ++++++++++
 arch/arm/mach-w90x900/Makefile         |  2 ++
 arch/arm/mach-w90x900/mach-nuc960evb.c | 44 +++++++++++++++++++++++++++
 arch/arm/mach-w90x900/nuc960.c         | 54 ++++++++++++++++++++++++++++++++++
 arch/arm/mach-w90x900/nuc960.h         | 28 ++++++++++++++++++
 5 files changed, 143 insertions(+)
 create mode 100644 arch/arm/mach-w90x900/mach-nuc960evb.c
 create mode 100644 arch/arm/mach-w90x900/nuc960.c
 create mode 100644 arch/arm/mach-w90x900/nuc960.h

(limited to 'arch')

diff --git a/arch/arm/mach-w90x900/Kconfig b/arch/arm/mach-w90x900/Kconfig
index 163b8010e57..69bab32a8bc 100644
--- a/arch/arm/mach-w90x900/Kconfig
+++ b/arch/arm/mach-w90x900/Kconfig
@@ -10,6 +10,11 @@ config CPU_NUC950
 	help
 	  Support for NUCP950 of Nuvoton NUC900 CPUs.
 
+config CPU_NUC960
+	bool
+	help
+	  Support for NUCP960 of Nuvoton NUC900 CPUs.
+
 menu "W90P910 Machines"
 
 config MACH_W90P910EVB
@@ -31,4 +36,14 @@ config MACH_W90P950EVB
 
 endmenu
 
+menu "NUC960 Machines"
+
+config MACH_W90N960EVB
+	bool "Nuvoton NUC960 Evaluation Board"
+	select CPU_NUC960
+	help
+	   Say Y here if you are using the Nuvoton NUC960EVB
+
+endmenu
+
 endif
diff --git a/arch/arm/mach-w90x900/Makefile b/arch/arm/mach-w90x900/Makefile
index a4622b577a2..828c0326441 100644
--- a/arch/arm/mach-w90x900/Makefile
+++ b/arch/arm/mach-w90x900/Makefile
@@ -10,8 +10,10 @@ obj-y				+= clksel.o dev.o cpu.o
 
 obj-$(CONFIG_CPU_W90P910)	+= nuc910.o
 obj-$(CONFIG_CPU_NUC950)	+= nuc950.o
+obj-$(CONFIG_CPU_NUC960)	+= nuc960.o
 
 # machine support
 
 obj-$(CONFIG_MACH_W90P910EVB)	+= mach-nuc910evb.o
 obj-$(CONFIG_MACH_W90P950EVB)	+= mach-nuc950evb.o
+obj-$(CONFIG_MACH_W90N960EVB)	+= mach-nuc960evb.o
diff --git a/arch/arm/mach-w90x900/mach-nuc960evb.c b/arch/arm/mach-w90x900/mach-nuc960evb.c
new file mode 100644
index 00000000000..e3a46f19f2b
--- /dev/null
+++ b/arch/arm/mach-w90x900/mach-nuc960evb.c
@@ -0,0 +1,44 @@
+/*
+ * linux/arch/arm/mach-w90x900/mach-nuc960evb.c
+ *
+ * Based on mach-s3c2410/mach-smdk2410.c by Jonas Dietsche
+ *
+ * Copyright (C) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach-types.h>
+#include <mach/map.h>
+
+#include "nuc960.h"
+
+static void __init nuc960evb_map_io(void)
+{
+	nuc960_map_io();
+	nuc960_init_clocks();
+}
+
+static void __init nuc960evb_init(void)
+{
+	nuc960_board_init();
+}
+
+MACHINE_START(W90N960EVB, "W90N960EVB")
+	/* Maintainer: Wan ZongShun */
+	.phys_io	= W90X900_PA_UART,
+	.io_pg_offst	= (((u32)W90X900_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= 0,
+	.map_io		= nuc960evb_map_io,
+	.init_irq	= nuc900_init_irq,
+	.init_machine	= nuc960evb_init,
+	.timer		= &nuc900_timer,
+MACHINE_END
diff --git a/arch/arm/mach-w90x900/nuc960.c b/arch/arm/mach-w90x900/nuc960.c
new file mode 100644
index 00000000000..8851a3a27ce
--- /dev/null
+++ b/arch/arm/mach-w90x900/nuc960.c
@@ -0,0 +1,54 @@
+/*
+ * linux/arch/arm/mach-w90x900/nuc960.c
+ *
+ * Based on linux/arch/arm/plat-s3c24xx/s3c244x.c by Ben Dooks
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * NUC960 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <asm/mach/map.h>
+#include <mach/hardware.h>
+#include "cpu.h"
+
+/* define specific CPU platform device */
+
+static struct platform_device *nuc960_dev[] __initdata = {
+	&nuc900_device_kpi,
+	&nuc900_device_fmi,
+};
+
+/* define specific CPU platform io map */
+
+static struct map_desc nuc960evb_iodesc[] __initdata = {
+};
+
+/*Init NUC960 evb io*/
+
+void __init nuc960_map_io(void)
+{
+	nuc900_map_io(nuc960evb_iodesc, ARRAY_SIZE(nuc960evb_iodesc));
+}
+
+/*Init NUC960 clock*/
+
+void __init nuc960_init_clocks(void)
+{
+	nuc900_init_clocks();
+}
+
+/*Init NUC960 board info*/
+
+void __init nuc960_board_init(void)
+{
+	nuc900_board_init(nuc960_dev, ARRAY_SIZE(nuc960_dev));
+}
diff --git a/arch/arm/mach-w90x900/nuc960.h b/arch/arm/mach-w90x900/nuc960.h
new file mode 100644
index 00000000000..f0c07cbe3a8
--- /dev/null
+++ b/arch/arm/mach-w90x900/nuc960.h
@@ -0,0 +1,28 @@
+/*
+ * arch/arm/mach-w90x900/nuc960.h
+ *
+ * Copyright (c) 2008 Nuvoton corporation
+ *
+ * Header file for NUC900 CPU support
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+struct map_desc;
+struct sys_timer;
+
+/* core initialisation functions */
+
+extern void nuc900_init_irq(void);
+extern struct sys_timer nuc900_timer;
+
+/* extern file from nuc960.c */
+
+extern void nuc960_board_init(void);
+extern void nuc960_init_clocks(void);
+extern void nuc960_map_io(void);
-- 
cgit v1.2.3


From 13f96d8f4c5a3f6a6b5e578d08869d79d690e0b2 Mon Sep 17 00:00:00 2001
From: Nicolas Pitre <nico@cam.org>
Date: Tue, 1 Sep 2009 22:01:27 +0100
Subject: ARM: 5687/1: fix an oops with highmem

In xdr_partial_copy_from_skb() there is that sequence:

		kaddr = kmap_atomic(*ppage, KM_SKB_SUNRPC_DATA);
		[...]
		flush_dcache_page(*ppage);
		kunmap_atomic(kaddr, KM_SKB_SUNRPC_DATA);

Mixing flush_dcache_page() and kmap_atomic() is a bit odd,
especially since kunmap_atomic() must deal with cache issues
already.  OTOH the non-highmem case must use flush_dcache_page()
as kunmap_atomic() becomes a no op with no cache maintenance.

Problem is that with highmem the implementation of kmap_atomic()
doesn't set page->virtual, and page_address(page) returns 0 in
that case. Here flush_dcache_page() calls __flush_dcache_page()
which calls __cpuc_flush_dcache_page(page_address(page)) resulting
in a kernel oops.

None of the kmap_atomic() implementations uses set_page_address().
Hence we can assume page_address() is always expected to return 0 in
that case. Let's conditionally call __cpuc_flush_dcache_page() only
when the page address is non zero, and perform that test only when
highmem is configured.

Signed-off-by: Nicolas Pitre <nico@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mm/flush.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c
index c07222eb5ce..575f3ad722e 100644
--- a/arch/arm/mm/flush.c
+++ b/arch/arm/mm/flush.c
@@ -144,7 +144,14 @@ void __flush_dcache_page(struct address_space *mapping, struct page *page)
 	 * page.  This ensures that data in the physical page is mutually
 	 * coherent with the kernels mapping.
 	 */
-	__cpuc_flush_dcache_page(page_address(page));
+#ifdef CONFIG_HIGHMEM
+	/*
+	 * kmap_atomic() doesn't set the page virtual address, and
+	 * kunmap_atomic() takes care of cache flushing already.
+	 */
+	if (page_address(page))
+#endif
+		__cpuc_flush_dcache_page(page_address(page));
 
 	/*
 	 * If this is a page cache page, and we have an aliasing VIPT cache,
-- 
cgit v1.2.3


From d0420c83f39f79afb82010c2d2cafd150eef651b Mon Sep 17 00:00:00 2001
From: David Howells <dhowells@redhat.com>
Date: Wed, 2 Sep 2009 09:14:16 +0100
Subject: KEYS: Extend TIF_NOTIFY_RESUME to (almost) all architectures [try #6]

Implement TIF_NOTIFY_RESUME for most of those architectures in which isn't yet
available, and, whilst we're at it, have it call the appropriate tracehook.

After this patch, blackfin, m68k* and xtensa still lack support and need
alteration of assembly code to make it work.

Resume notification can then be used (by a later patch) to install a new
session keyring on the parent of a process.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>

cc: linux-arch@vger.kernel.org
Signed-off-by: James Morris <jmorris@namei.org>
---
 arch/alpha/include/asm/thread_info.h  | 5 ++++-
 arch/alpha/kernel/signal.c            | 5 +++++
 arch/arm/include/asm/thread_info.h    | 3 +++
 arch/arm/kernel/entry-common.S        | 2 +-
 arch/arm/kernel/signal.c              | 5 +++++
 arch/avr32/include/asm/thread_info.h  | 6 +++++-
 arch/avr32/kernel/entry-avr32b.S      | 2 +-
 arch/avr32/kernel/signal.c            | 5 +++++
 arch/cris/kernel/ptrace.c             | 5 +++++
 arch/h8300/include/asm/thread_info.h  | 2 ++
 arch/h8300/kernel/signal.c            | 5 +++++
 arch/m32r/include/asm/thread_info.h   | 2 ++
 arch/m32r/kernel/signal.c             | 5 +++++
 arch/mips/include/asm/thread_info.h   | 2 ++
 arch/mips/kernel/signal.c             | 5 +++++
 arch/parisc/include/asm/thread_info.h | 4 +++-
 arch/parisc/kernel/entry.S            | 2 +-
 arch/parisc/kernel/signal.c           | 5 +++++
 18 files changed, 64 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/alpha/include/asm/thread_info.h b/arch/alpha/include/asm/thread_info.h
index 60c83abfde7..5076a8860b1 100644
--- a/arch/alpha/include/asm/thread_info.h
+++ b/arch/alpha/include/asm/thread_info.h
@@ -75,6 +75,7 @@ register struct thread_info *__current_thread_info __asm__("$8");
 #define TIF_UAC_SIGBUS		7
 #define TIF_MEMDIE		8
 #define TIF_RESTORE_SIGMASK	9	/* restore signal mask in do_signal */
+#define TIF_NOTIFY_RESUME	10	/* callback before returning to user */
 #define TIF_FREEZE		16	/* is freezing for suspend */
 
 #define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
@@ -82,10 +83,12 @@ register struct thread_info *__current_thread_info __asm__("$8");
 #define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
 #define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
 #define _TIF_RESTORE_SIGMASK	(1<<TIF_RESTORE_SIGMASK)
+#define _TIF_NOTIFY_RESUME	(1<<TIF_NOTIFY_RESUME)
 #define _TIF_FREEZE		(1<<TIF_FREEZE)
 
 /* Work to do on interrupt/exception return.  */
-#define _TIF_WORK_MASK		(_TIF_SIGPENDING | _TIF_NEED_RESCHED)
+#define _TIF_WORK_MASK		(_TIF_SIGPENDING | _TIF_NEED_RESCHED | \
+				 _TIF_NOTIFY_RESUME)
 
 /* Work to do on any return to userspace.  */
 #define _TIF_ALLWORK_MASK	(_TIF_WORK_MASK		\
diff --git a/arch/alpha/kernel/signal.c b/arch/alpha/kernel/signal.c
index df65eaa84c4..04e17c1f0f1 100644
--- a/arch/alpha/kernel/signal.c
+++ b/arch/alpha/kernel/signal.c
@@ -683,4 +683,9 @@ do_notify_resume(struct pt_regs *regs, struct switch_stack *sw,
 {
 	if (thread_info_flags & (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK))
 		do_signal(regs, sw, r0, r19);
+
+	if (thread_info_flags & _TIF_NOTIFY_RESUME) {
+		clear_thread_flag(TIF_NOTIFY_RESUME);
+		tracehook_notify_resume(regs);
+	}
 }
diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h
index 73394e50cbc..d3a39b1e6c0 100644
--- a/arch/arm/include/asm/thread_info.h
+++ b/arch/arm/include/asm/thread_info.h
@@ -130,11 +130,13 @@ extern void vfp_sync_state(struct thread_info *thread);
  *  TIF_SYSCALL_TRACE	- syscall trace active
  *  TIF_SIGPENDING	- signal pending
  *  TIF_NEED_RESCHED	- rescheduling necessary
+ *  TIF_NOTIFY_RESUME	- callback before returning to user
  *  TIF_USEDFPU		- FPU was used by this task this quantum (SMP)
  *  TIF_POLLING_NRFLAG	- true if poll_idle() is polling TIF_NEED_RESCHED
  */
 #define TIF_SIGPENDING		0
 #define TIF_NEED_RESCHED	1
+#define TIF_NOTIFY_RESUME	2	/* callback before returning to user */
 #define TIF_SYSCALL_TRACE	8
 #define TIF_POLLING_NRFLAG	16
 #define TIF_USING_IWMMXT	17
@@ -143,6 +145,7 @@ extern void vfp_sync_state(struct thread_info *thread);
 
 #define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
 #define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
+#define _TIF_NOTIFY_RESUME	(1 << TIF_NOTIFY_RESUME)
 #define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
 #define _TIF_POLLING_NRFLAG	(1 << TIF_POLLING_NRFLAG)
 #define _TIF_USING_IWMMXT	(1 << TIF_USING_IWMMXT)
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 8c3de1a350b..7813ab782fd 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -51,7 +51,7 @@ fast_work_pending:
 work_pending:
 	tst	r1, #_TIF_NEED_RESCHED
 	bne	work_resched
-	tst	r1, #_TIF_SIGPENDING
+	tst	r1, #_TIF_SIGPENDING|_TIF_NOTIFY_RESUME
 	beq	no_work_pending
 	mov	r0, sp				@ 'regs'
 	mov	r2, why				@ 'syscall'
diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c
index f6bc5d44278..13dec276927 100644
--- a/arch/arm/kernel/signal.c
+++ b/arch/arm/kernel/signal.c
@@ -707,4 +707,9 @@ do_notify_resume(struct pt_regs *regs, unsigned int thread_flags, int syscall)
 {
 	if (thread_flags & _TIF_SIGPENDING)
 		do_signal(&current->blocked, regs, syscall);
+
+	if (thread_flags & _TIF_NOTIFY_RESUME) {
+		clear_thread_flag(TIF_NOTIFY_RESUME);
+		tracehook_notify_resume(regs);
+	}
 }
diff --git a/arch/avr32/include/asm/thread_info.h b/arch/avr32/include/asm/thread_info.h
index fc42de5ca20..fd0c5d7e933 100644
--- a/arch/avr32/include/asm/thread_info.h
+++ b/arch/avr32/include/asm/thread_info.h
@@ -84,6 +84,7 @@ static inline struct thread_info *current_thread_info(void)
 #define TIF_MEMDIE		6
 #define TIF_RESTORE_SIGMASK	7	/* restore signal mask in do_signal */
 #define TIF_CPU_GOING_TO_SLEEP	8	/* CPU is entering sleep 0 mode */
+#define TIF_NOTIFY_RESUME	9	/* callback before returning to user */
 #define TIF_FREEZE		29
 #define TIF_DEBUG		30	/* debugging enabled */
 #define TIF_USERSPACE		31      /* true if FS sets userspace */
@@ -96,6 +97,7 @@ static inline struct thread_info *current_thread_info(void)
 #define _TIF_MEMDIE		(1 << TIF_MEMDIE)
 #define _TIF_RESTORE_SIGMASK	(1 << TIF_RESTORE_SIGMASK)
 #define _TIF_CPU_GOING_TO_SLEEP (1 << TIF_CPU_GOING_TO_SLEEP)
+#define _TIF_NOTIFY_RESUME	(1 << TIF_NOTIFY_RESUME)
 #define _TIF_FREEZE		(1 << TIF_FREEZE)
 
 /* Note: The masks below must never span more than 16 bits! */
@@ -103,13 +105,15 @@ static inline struct thread_info *current_thread_info(void)
 /* work to do on interrupt/exception return */
 #define _TIF_WORK_MASK				\
 	((1 << TIF_SIGPENDING)			\
+	 | _TIF_NOTIFY_RESUME			\
 	 | (1 << TIF_NEED_RESCHED)		\
 	 | (1 << TIF_POLLING_NRFLAG)		\
 	 | (1 << TIF_BREAKPOINT)		\
 	 | (1 << TIF_RESTORE_SIGMASK))
 
 /* work to do on any return to userspace */
-#define _TIF_ALLWORK_MASK	(_TIF_WORK_MASK | (1 << TIF_SYSCALL_TRACE))
+#define _TIF_ALLWORK_MASK	(_TIF_WORK_MASK | (1 << TIF_SYSCALL_TRACE) | \
+				 _TIF_NOTIFY_RESUME)
 /* work to do on return from debug mode */
 #define _TIF_DBGWORK_MASK	(_TIF_WORK_MASK & ~(1 << TIF_BREAKPOINT))
 
diff --git a/arch/avr32/kernel/entry-avr32b.S b/arch/avr32/kernel/entry-avr32b.S
index 009a80155d6..169268c40ae 100644
--- a/arch/avr32/kernel/entry-avr32b.S
+++ b/arch/avr32/kernel/entry-avr32b.S
@@ -281,7 +281,7 @@ syscall_exit_work:
 	ld.w	r1, r0[TI_flags]
 	rjmp	1b
 
-2:	mov	r2, _TIF_SIGPENDING | _TIF_RESTORE_SIGMASK
+2:	mov	r2, _TIF_SIGPENDING | _TIF_RESTORE_SIGMASK | _TIF_NOTIFY_RESUME
 	tst	r1, r2
 	breq	3f
 	unmask_interrupts
diff --git a/arch/avr32/kernel/signal.c b/arch/avr32/kernel/signal.c
index 27227561bad..62d242e2d03 100644
--- a/arch/avr32/kernel/signal.c
+++ b/arch/avr32/kernel/signal.c
@@ -322,4 +322,9 @@ asmlinkage void do_notify_resume(struct pt_regs *regs, struct thread_info *ti)
 
 	if (ti->flags & (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK))
 		do_signal(regs, &current->blocked, syscall);
+
+	if (ti->flags & _TIF_NOTIFY_RESUME) {
+		clear_thread_flag(TIF_NOTIFY_RESUME);
+		tracehook_notify_resume(regs);
+	}
 }
diff --git a/arch/cris/kernel/ptrace.c b/arch/cris/kernel/ptrace.c
index b326023baab..4f06d7fb43d 100644
--- a/arch/cris/kernel/ptrace.c
+++ b/arch/cris/kernel/ptrace.c
@@ -36,4 +36,9 @@ void do_notify_resume(int canrestart, struct pt_regs *regs,
 	/* deal with pending signal delivery */
 	if (thread_info_flags & _TIF_SIGPENDING)
 		do_signal(canrestart,regs);
+
+	if (thread_info_flags & _TIF_NOTIFY_RESUME) {
+		clear_thread_flag(TIF_NOTIFY_RESUME);
+		tracehook_notify_resume(regs);
+	}
 }
diff --git a/arch/h8300/include/asm/thread_info.h b/arch/h8300/include/asm/thread_info.h
index 8bbc8b0ee45..70e67e47d02 100644
--- a/arch/h8300/include/asm/thread_info.h
+++ b/arch/h8300/include/asm/thread_info.h
@@ -89,6 +89,7 @@ static inline struct thread_info *current_thread_info(void)
 					   TIF_NEED_RESCHED */
 #define TIF_MEMDIE		4
 #define TIF_RESTORE_SIGMASK	5	/* restore signal mask in do_signal() */
+#define TIF_NOTIFY_RESUME	6	/* callback before returning to user */
 #define TIF_FREEZE		16	/* is freezing for suspend */
 
 /* as above, but as bit values */
@@ -97,6 +98,7 @@ static inline struct thread_info *current_thread_info(void)
 #define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
 #define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
 #define _TIF_RESTORE_SIGMASK	(1<<TIF_RESTORE_SIGMASK)
+#define _TIF_NOTIFY_RESUME	(1 << TIF_NOTIFY_RESUME)
 #define _TIF_FREEZE		(1<<TIF_FREEZE)
 
 #define _TIF_WORK_MASK		0x0000FFFE	/* work to do on interrupt/exception return */
diff --git a/arch/h8300/kernel/signal.c b/arch/h8300/kernel/signal.c
index cf3472f7389..56b3ab7dbbb 100644
--- a/arch/h8300/kernel/signal.c
+++ b/arch/h8300/kernel/signal.c
@@ -552,4 +552,9 @@ asmlinkage void do_notify_resume(struct pt_regs *regs, u32 thread_info_flags)
 {
 	if (thread_info_flags & (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK))
 		do_signal(regs, NULL);
+
+	if (thread_info_flags & _TIF_NOTIFY_RESUME) {
+		clear_thread_flag(TIF_NOTIFY_RESUME);
+		tracehook_notify_resume(regs);
+	}
 }
diff --git a/arch/m32r/include/asm/thread_info.h b/arch/m32r/include/asm/thread_info.h
index 07bb5bd00e2..71578151a40 100644
--- a/arch/m32r/include/asm/thread_info.h
+++ b/arch/m32r/include/asm/thread_info.h
@@ -149,6 +149,7 @@ static inline unsigned int get_thread_fault_code(void)
 #define TIF_NEED_RESCHED	2	/* rescheduling necessary */
 #define TIF_SINGLESTEP		3	/* restore singlestep on return to user mode */
 #define TIF_IRET		4	/* return with iret */
+#define TIF_NOTIFY_RESUME	5	/* callback before returning to user */
 #define TIF_RESTORE_SIGMASK	8	/* restore signal mask in do_signal() */
 #define TIF_USEDFPU		16	/* FPU was used by this task this quantum (SMP) */
 #define TIF_POLLING_NRFLAG	17	/* true if poll_idle() is polling TIF_NEED_RESCHED */
@@ -160,6 +161,7 @@ static inline unsigned int get_thread_fault_code(void)
 #define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
 #define _TIF_SINGLESTEP		(1<<TIF_SINGLESTEP)
 #define _TIF_IRET		(1<<TIF_IRET)
+#define _TIF_NOTIFY_RESUME	(1<<TIF_NOTIFY_RESUME)
 #define _TIF_RESTORE_SIGMASK	(1<<TIF_RESTORE_SIGMASK)
 #define _TIF_USEDFPU		(1<<TIF_USEDFPU)
 #define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
diff --git a/arch/m32r/kernel/signal.c b/arch/m32r/kernel/signal.c
index 18124542a6e..3220258be18 100644
--- a/arch/m32r/kernel/signal.c
+++ b/arch/m32r/kernel/signal.c
@@ -408,5 +408,10 @@ void do_notify_resume(struct pt_regs *regs, sigset_t *oldset,
 	if (thread_info_flags & _TIF_SIGPENDING)
 		do_signal(regs,oldset);
 
+	if (thread_info_flags & _TIF_NOTIFY_RESUME) {
+		clear_thread_flag(TIF_NOTIFY_RESUME);
+		tracehook_notify_resume(regs);
+	}
+
 	clear_thread_flag(TIF_IRET);
 }
diff --git a/arch/mips/include/asm/thread_info.h b/arch/mips/include/asm/thread_info.h
index f9df720d2e4..01cc1630b66 100644
--- a/arch/mips/include/asm/thread_info.h
+++ b/arch/mips/include/asm/thread_info.h
@@ -115,6 +115,7 @@ register struct thread_info *__current_thread_info __asm__("$28");
 #define TIF_NEED_RESCHED	2	/* rescheduling necessary */
 #define TIF_SYSCALL_AUDIT	3	/* syscall auditing active */
 #define TIF_SECCOMP		4	/* secure computing */
+#define TIF_NOTIFY_RESUME	5	/* callback before returning to user */
 #define TIF_RESTORE_SIGMASK	9	/* restore signal mask in do_signal() */
 #define TIF_USEDFPU		16	/* FPU was used by this task this quantum (SMP) */
 #define TIF_POLLING_NRFLAG	17	/* true if poll_idle() is polling TIF_NEED_RESCHED */
@@ -139,6 +140,7 @@ register struct thread_info *__current_thread_info __asm__("$28");
 #define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
 #define _TIF_SYSCALL_AUDIT	(1<<TIF_SYSCALL_AUDIT)
 #define _TIF_SECCOMP		(1<<TIF_SECCOMP)
+#define _TIF_NOTIFY_RESUME	(1<<TIF_NOTIFY_RESUME)
 #define _TIF_RESTORE_SIGMASK	(1<<TIF_RESTORE_SIGMASK)
 #define _TIF_USEDFPU		(1<<TIF_USEDFPU)
 #define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c
index 830c5ef9932..a3d1015471d 100644
--- a/arch/mips/kernel/signal.c
+++ b/arch/mips/kernel/signal.c
@@ -700,4 +700,9 @@ asmlinkage void do_notify_resume(struct pt_regs *regs, void *unused,
 	/* deal with pending signal delivery */
 	if (thread_info_flags & (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK))
 		do_signal(regs);
+
+	if (thread_info_flags & _TIF_NOTIFY_RESUME) {
+		clear_thread_flag(TIF_NOTIFY_RESUME);
+		tracehook_notify_resume(regs);
+	}
 }
diff --git a/arch/parisc/include/asm/thread_info.h b/arch/parisc/include/asm/thread_info.h
index 4ce0edfbe96..ac775a76bff 100644
--- a/arch/parisc/include/asm/thread_info.h
+++ b/arch/parisc/include/asm/thread_info.h
@@ -59,6 +59,7 @@ struct thread_info {
 #define TIF_MEMDIE		5
 #define TIF_RESTORE_SIGMASK	6	/* restore saved signal mask */
 #define TIF_FREEZE		7	/* is freezing for suspend */
+#define TIF_NOTIFY_RESUME	8	/* callback before returning to user */
 
 #define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
 #define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
@@ -67,8 +68,9 @@ struct thread_info {
 #define _TIF_32BIT		(1 << TIF_32BIT)
 #define _TIF_RESTORE_SIGMASK	(1 << TIF_RESTORE_SIGMASK)
 #define _TIF_FREEZE		(1 << TIF_FREEZE)
+#define _TIF_NOTIFY_RESUME	(1 << TIF_NOTIFY_RESUME)
 
-#define _TIF_USER_WORK_MASK     (_TIF_SIGPENDING | \
+#define _TIF_USER_WORK_MASK     (_TIF_SIGPENDING | _TIF_NOTIFY_RESUME | \
                                  _TIF_NEED_RESCHED | _TIF_RESTORE_SIGMASK)
 
 #endif /* __KERNEL__ */
diff --git a/arch/parisc/kernel/entry.S b/arch/parisc/kernel/entry.S
index e552e547cb9..8c4712b74dc 100644
--- a/arch/parisc/kernel/entry.S
+++ b/arch/parisc/kernel/entry.S
@@ -948,7 +948,7 @@ intr_check_sig:
 	/* As above */
 	mfctl   %cr30,%r1
 	LDREG	TI_FLAGS(%r1),%r19
-	ldi	(_TIF_SIGPENDING|_TIF_RESTORE_SIGMASK), %r20
+	ldi	(_TIF_SIGPENDING|_TIF_RESTORE_SIGMASK|_TIF_NOTIFY_RESUME), %r20
 	and,COND(<>)	%r19, %r20, %r0
 	b,n	intr_restore	/* skip past if we've nothing to do */
 
diff --git a/arch/parisc/kernel/signal.c b/arch/parisc/kernel/signal.c
index f82544225e8..b3bfc432670 100644
--- a/arch/parisc/kernel/signal.c
+++ b/arch/parisc/kernel/signal.c
@@ -645,4 +645,9 @@ void do_notify_resume(struct pt_regs *regs, long in_syscall)
 	if (test_thread_flag(TIF_SIGPENDING) ||
 	    test_thread_flag(TIF_RESTORE_SIGMASK))
 		do_signal(regs, in_syscall);
+
+	if (test_thread_flag(TIF_NOTIFY_RESUME)) {
+		clear_thread_flag(TIF_NOTIFY_RESUME);
+		tracehook_notify_resume(regs);
+	}
 }
-- 
cgit v1.2.3


From ee18d64c1f632043a02e6f5ba5e045bb26a5465f Mon Sep 17 00:00:00 2001
From: David Howells <dhowells@redhat.com>
Date: Wed, 2 Sep 2009 09:14:21 +0100
Subject: KEYS: Add a keyctl to install a process's session keyring on its
 parent [try #6]

Add a keyctl to install a process's session keyring onto its parent.  This
replaces the parent's session keyring.  Because the COW credential code does
not permit one process to change another process's credentials directly, the
change is deferred until userspace next starts executing again.  Normally this
will be after a wait*() syscall.

To support this, three new security hooks have been provided:
cred_alloc_blank() to allocate unset security creds, cred_transfer() to fill in
the blank security creds and key_session_to_parent() - which asks the LSM if
the process may replace its parent's session keyring.

The replacement may only happen if the process has the same ownership details
as its parent, and the process has LINK permission on the session keyring, and
the session keyring is owned by the process, and the LSM permits it.

Note that this requires alteration to each architecture's notify_resume path.
This has been done for all arches barring blackfin, m68k* and xtensa, all of
which need assembly alteration to support TIF_NOTIFY_RESUME.  This allows the
replacement to be performed at the point the parent process resumes userspace
execution.

This allows the userspace AFS pioctl emulation to fully emulate newpag() and
the VIOCSETTOK and VIOCSETTOK2 pioctls, all of which require the ability to
alter the parent process's PAG membership.  However, since kAFS doesn't use
PAGs per se, but rather dumps the keys into the session keyring, the session
keyring of the parent must be replaced if, for example, VIOCSETTOK is passed
the newpag flag.

This can be tested with the following program:

	#include <stdio.h>
	#include <stdlib.h>
	#include <keyutils.h>

	#define KEYCTL_SESSION_TO_PARENT	18

	#define OSERROR(X, S) do { if ((long)(X) == -1) { perror(S); exit(1); } } while(0)

	int main(int argc, char **argv)
	{
		key_serial_t keyring, key;
		long ret;

		keyring = keyctl_join_session_keyring(argv[1]);
		OSERROR(keyring, "keyctl_join_session_keyring");

		key = add_key("user", "a", "b", 1, keyring);
		OSERROR(key, "add_key");

		ret = keyctl(KEYCTL_SESSION_TO_PARENT);
		OSERROR(ret, "KEYCTL_SESSION_TO_PARENT");

		return 0;
	}

Compiled and linked with -lkeyutils, you should see something like:

	[dhowells@andromeda ~]$ keyctl show
	Session Keyring
	       -3 --alswrv   4043  4043  keyring: _ses
	355907932 --alswrv   4043    -1   \_ keyring: _uid.4043
	[dhowells@andromeda ~]$ /tmp/newpag
	[dhowells@andromeda ~]$ keyctl show
	Session Keyring
	       -3 --alswrv   4043  4043  keyring: _ses
	1055658746 --alswrv   4043  4043   \_ user: a
	[dhowells@andromeda ~]$ /tmp/newpag hello
	[dhowells@andromeda ~]$ keyctl show
	Session Keyring
	       -3 --alswrv   4043  4043  keyring: hello
	340417692 --alswrv   4043  4043   \_ user: a

Where the test program creates a new session keyring, sticks a user key named
'a' into it and then installs it on its parent.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
---
 arch/alpha/kernel/signal.c    | 2 ++
 arch/arm/kernel/signal.c      | 2 ++
 arch/avr32/kernel/signal.c    | 2 ++
 arch/cris/kernel/ptrace.c     | 2 ++
 arch/frv/kernel/signal.c      | 2 ++
 arch/h8300/kernel/signal.c    | 2 ++
 arch/ia64/kernel/process.c    | 2 ++
 arch/m32r/kernel/signal.c     | 2 ++
 arch/mips/kernel/signal.c     | 2 ++
 arch/mn10300/kernel/signal.c  | 2 ++
 arch/parisc/kernel/signal.c   | 2 ++
 arch/s390/kernel/signal.c     | 2 ++
 arch/sh/kernel/signal_32.c    | 2 ++
 arch/sh/kernel/signal_64.c    | 2 ++
 arch/sparc/kernel/signal_32.c | 2 ++
 arch/sparc/kernel/signal_64.c | 3 +++
 arch/x86/kernel/signal.c      | 2 ++
 17 files changed, 35 insertions(+)

(limited to 'arch')

diff --git a/arch/alpha/kernel/signal.c b/arch/alpha/kernel/signal.c
index 04e17c1f0f1..d91aaa74705 100644
--- a/arch/alpha/kernel/signal.c
+++ b/arch/alpha/kernel/signal.c
@@ -687,5 +687,7 @@ do_notify_resume(struct pt_regs *regs, struct switch_stack *sw,
 	if (thread_info_flags & _TIF_NOTIFY_RESUME) {
 		clear_thread_flag(TIF_NOTIFY_RESUME);
 		tracehook_notify_resume(regs);
+		if (current->replacement_session_keyring)
+			key_replace_session_keyring();
 	}
 }
diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c
index 13dec276927..ea4ad3a43c8 100644
--- a/arch/arm/kernel/signal.c
+++ b/arch/arm/kernel/signal.c
@@ -711,5 +711,7 @@ do_notify_resume(struct pt_regs *regs, unsigned int thread_flags, int syscall)
 	if (thread_flags & _TIF_NOTIFY_RESUME) {
 		clear_thread_flag(TIF_NOTIFY_RESUME);
 		tracehook_notify_resume(regs);
+		if (current->replacement_session_keyring)
+			key_replace_session_keyring();
 	}
 }
diff --git a/arch/avr32/kernel/signal.c b/arch/avr32/kernel/signal.c
index 62d242e2d03..de9f7fe2aef 100644
--- a/arch/avr32/kernel/signal.c
+++ b/arch/avr32/kernel/signal.c
@@ -326,5 +326,7 @@ asmlinkage void do_notify_resume(struct pt_regs *regs, struct thread_info *ti)
 	if (ti->flags & _TIF_NOTIFY_RESUME) {
 		clear_thread_flag(TIF_NOTIFY_RESUME);
 		tracehook_notify_resume(regs);
+		if (current->replacement_session_keyring)
+			key_replace_session_keyring();
 	}
 }
diff --git a/arch/cris/kernel/ptrace.c b/arch/cris/kernel/ptrace.c
index 4f06d7fb43d..32e9d5ee895 100644
--- a/arch/cris/kernel/ptrace.c
+++ b/arch/cris/kernel/ptrace.c
@@ -40,5 +40,7 @@ void do_notify_resume(int canrestart, struct pt_regs *regs,
 	if (thread_info_flags & _TIF_NOTIFY_RESUME) {
 		clear_thread_flag(TIF_NOTIFY_RESUME);
 		tracehook_notify_resume(regs);
+		if (current->replacement_session_keyring)
+			key_replace_session_keyring();
 	}
 }
diff --git a/arch/frv/kernel/signal.c b/arch/frv/kernel/signal.c
index 4a7a62c6e78..6b0a2b6fed6 100644
--- a/arch/frv/kernel/signal.c
+++ b/arch/frv/kernel/signal.c
@@ -572,6 +572,8 @@ asmlinkage void do_notify_resume(__u32 thread_info_flags)
 	if (thread_info_flags & _TIF_NOTIFY_RESUME) {
 		clear_thread_flag(TIF_NOTIFY_RESUME);
 		tracehook_notify_resume(__frame);
+		if (current->replacement_session_keyring)
+			key_replace_session_keyring();
 	}
 
 } /* end do_notify_resume() */
diff --git a/arch/h8300/kernel/signal.c b/arch/h8300/kernel/signal.c
index 56b3ab7dbbb..abac3ee8c52 100644
--- a/arch/h8300/kernel/signal.c
+++ b/arch/h8300/kernel/signal.c
@@ -556,5 +556,7 @@ asmlinkage void do_notify_resume(struct pt_regs *regs, u32 thread_info_flags)
 	if (thread_info_flags & _TIF_NOTIFY_RESUME) {
 		clear_thread_flag(TIF_NOTIFY_RESUME);
 		tracehook_notify_resume(regs);
+		if (current->replacement_session_keyring)
+			key_replace_session_keyring();
 	}
 }
diff --git a/arch/ia64/kernel/process.c b/arch/ia64/kernel/process.c
index 5d7c0e5b9e7..89969e95004 100644
--- a/arch/ia64/kernel/process.c
+++ b/arch/ia64/kernel/process.c
@@ -192,6 +192,8 @@ do_notify_resume_user(sigset_t *unused, struct sigscratch *scr, long in_syscall)
 	if (test_thread_flag(TIF_NOTIFY_RESUME)) {
 		clear_thread_flag(TIF_NOTIFY_RESUME);
 		tracehook_notify_resume(&scr->pt);
+		if (current->replacement_session_keyring)
+			key_replace_session_keyring();
 	}
 
 	/* copy user rbs to kernel rbs */
diff --git a/arch/m32r/kernel/signal.c b/arch/m32r/kernel/signal.c
index 3220258be18..f80bac17c65 100644
--- a/arch/m32r/kernel/signal.c
+++ b/arch/m32r/kernel/signal.c
@@ -411,6 +411,8 @@ void do_notify_resume(struct pt_regs *regs, sigset_t *oldset,
 	if (thread_info_flags & _TIF_NOTIFY_RESUME) {
 		clear_thread_flag(TIF_NOTIFY_RESUME);
 		tracehook_notify_resume(regs);
+		if (current->replacement_session_keyring)
+			key_replace_session_keyring();
 	}
 
 	clear_thread_flag(TIF_IRET);
diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c
index a3d1015471d..c2acf31874a 100644
--- a/arch/mips/kernel/signal.c
+++ b/arch/mips/kernel/signal.c
@@ -704,5 +704,7 @@ asmlinkage void do_notify_resume(struct pt_regs *regs, void *unused,
 	if (thread_info_flags & _TIF_NOTIFY_RESUME) {
 		clear_thread_flag(TIF_NOTIFY_RESUME);
 		tracehook_notify_resume(regs);
+		if (current->replacement_session_keyring)
+			key_replace_session_keyring();
 	}
 }
diff --git a/arch/mn10300/kernel/signal.c b/arch/mn10300/kernel/signal.c
index feb2f2e810d..a21f43bc68e 100644
--- a/arch/mn10300/kernel/signal.c
+++ b/arch/mn10300/kernel/signal.c
@@ -568,5 +568,7 @@ asmlinkage void do_notify_resume(struct pt_regs *regs, u32 thread_info_flags)
 	if (thread_info_flags & _TIF_NOTIFY_RESUME) {
 		clear_thread_flag(TIF_NOTIFY_RESUME);
 		tracehook_notify_resume(__frame);
+		if (current->replacement_session_keyring)
+			key_replace_session_keyring();
 	}
 }
diff --git a/arch/parisc/kernel/signal.c b/arch/parisc/kernel/signal.c
index b3bfc432670..5ca1c02b805 100644
--- a/arch/parisc/kernel/signal.c
+++ b/arch/parisc/kernel/signal.c
@@ -649,5 +649,7 @@ void do_notify_resume(struct pt_regs *regs, long in_syscall)
 	if (test_thread_flag(TIF_NOTIFY_RESUME)) {
 		clear_thread_flag(TIF_NOTIFY_RESUME);
 		tracehook_notify_resume(regs);
+		if (current->replacement_session_keyring)
+			key_replace_session_keyring();
 	}
 }
diff --git a/arch/s390/kernel/signal.c b/arch/s390/kernel/signal.c
index 062bd64e65f..6b4fef877f9 100644
--- a/arch/s390/kernel/signal.c
+++ b/arch/s390/kernel/signal.c
@@ -536,4 +536,6 @@ void do_notify_resume(struct pt_regs *regs)
 {
 	clear_thread_flag(TIF_NOTIFY_RESUME);
 	tracehook_notify_resume(regs);
+	if (current->replacement_session_keyring)
+		key_replace_session_keyring();
 }
diff --git a/arch/sh/kernel/signal_32.c b/arch/sh/kernel/signal_32.c
index b5afbec1db5..04a21883f32 100644
--- a/arch/sh/kernel/signal_32.c
+++ b/arch/sh/kernel/signal_32.c
@@ -640,5 +640,7 @@ asmlinkage void do_notify_resume(struct pt_regs *regs, unsigned int save_r0,
 	if (thread_info_flags & _TIF_NOTIFY_RESUME) {
 		clear_thread_flag(TIF_NOTIFY_RESUME);
 		tracehook_notify_resume(regs);
+		if (current->replacement_session_keyring)
+			key_replace_session_keyring();
 	}
 }
diff --git a/arch/sh/kernel/signal_64.c b/arch/sh/kernel/signal_64.c
index 0663a0ee602..9e5c9b1d7e9 100644
--- a/arch/sh/kernel/signal_64.c
+++ b/arch/sh/kernel/signal_64.c
@@ -772,5 +772,7 @@ asmlinkage void do_notify_resume(struct pt_regs *regs, unsigned long thread_info
 	if (thread_info_flags & _TIF_NOTIFY_RESUME) {
 		clear_thread_flag(TIF_NOTIFY_RESUME);
 		tracehook_notify_resume(regs);
+		if (current->replacement_session_keyring)
+			key_replace_session_keyring();
 	}
 }
diff --git a/arch/sparc/kernel/signal_32.c b/arch/sparc/kernel/signal_32.c
index 181d069a2d4..7ce1a1005b1 100644
--- a/arch/sparc/kernel/signal_32.c
+++ b/arch/sparc/kernel/signal_32.c
@@ -590,6 +590,8 @@ void do_notify_resume(struct pt_regs *regs, unsigned long orig_i0,
 	if (thread_info_flags & _TIF_NOTIFY_RESUME) {
 		clear_thread_flag(TIF_NOTIFY_RESUME);
 		tracehook_notify_resume(regs);
+		if (current->replacement_session_keyring)
+			key_replace_session_keyring();
 	}
 }
 
diff --git a/arch/sparc/kernel/signal_64.c b/arch/sparc/kernel/signal_64.c
index ec82d76dc6f..647afbda7ae 100644
--- a/arch/sparc/kernel/signal_64.c
+++ b/arch/sparc/kernel/signal_64.c
@@ -613,5 +613,8 @@ void do_notify_resume(struct pt_regs *regs, unsigned long orig_i0, unsigned long
 	if (thread_info_flags & _TIF_NOTIFY_RESUME) {
 		clear_thread_flag(TIF_NOTIFY_RESUME);
 		tracehook_notify_resume(regs);
+		if (current->replacement_session_keyring)
+			key_replace_session_keyring();
 	}
 }
+
diff --git a/arch/x86/kernel/signal.c b/arch/x86/kernel/signal.c
index 4c578751e94..81e58238c4c 100644
--- a/arch/x86/kernel/signal.c
+++ b/arch/x86/kernel/signal.c
@@ -869,6 +869,8 @@ do_notify_resume(struct pt_regs *regs, void *unused, __u32 thread_info_flags)
 	if (thread_info_flags & _TIF_NOTIFY_RESUME) {
 		clear_thread_flag(TIF_NOTIFY_RESUME);
 		tracehook_notify_resume(regs);
+		if (current->replacement_session_keyring)
+			key_replace_session_keyring();
 	}
 
 #ifdef CONFIG_X86_32
-- 
cgit v1.2.3


From e3e59876e82a5e1a07f365d5474e7b6943524725 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Thu, 3 Sep 2009 14:02:10 +0200
Subject: x86/amd-iommu: Dump fault entry on DTE error

This patch adds code to dump the content of the device table
entry which caused an ILLEGAL_DEV_TABLE_ENTRY error from the
IOMMU hardware.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
 arch/x86/kernel/amd_iommu.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index 6c99f503780..364c6de2637 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -138,6 +138,15 @@ static int iommu_has_npcache(struct amd_iommu *iommu)
  *
  ****************************************************************************/
 
+static void dump_dte_entry(u16 devid)
+{
+	int i;
+
+	for (i = 0; i < 8; ++i)
+		pr_err("AMD-Vi: DTE[%d]: %08x\n", i,
+			amd_iommu_dev_table[devid].data[i]);
+}
+
 static void iommu_print_event(void *__evt)
 {
 	u32 *event = __evt;
@@ -155,6 +164,7 @@ static void iommu_print_event(void *__evt)
 		       "address=0x%016llx flags=0x%04x]\n",
 		       PCI_BUS(devid), PCI_SLOT(devid), PCI_FUNC(devid),
 		       address, flags);
+		dump_dte_entry(devid);
 		break;
 	case EVENT_TYPE_IO_FAULT:
 		printk("IO_PAGE_FAULT device=%02x:%02x.%x "
-- 
cgit v1.2.3


From 945b4ac44e5700acd3d974c176c8ace34b4d2e8e Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Thu, 3 Sep 2009 14:25:02 +0200
Subject: x86/amd-iommu: Dump illegal command on ILLEGAL_COMMAND_ERROR

This patch adds code to dump the command which caused an
ILLEGAL_COMMAND_ERROR raised by the IOMMU hardware.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
 arch/x86/kernel/amd_iommu.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index 364c6de2637..e62b35f5df1 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -147,6 +147,15 @@ static void dump_dte_entry(u16 devid)
 			amd_iommu_dev_table[devid].data[i]);
 }
 
+static void dump_command(unsigned long phys_addr)
+{
+	struct iommu_cmd *cmd = phys_to_virt(phys_addr);
+	int i;
+
+	for (i = 0; i < 4; ++i)
+		pr_err("AMD-Vi: CMD[%d]: %08x\n", i, cmd->data[i]);
+}
+
 static void iommu_print_event(void *__evt)
 {
 	u32 *event = __evt;
@@ -186,6 +195,7 @@ static void iommu_print_event(void *__evt)
 		break;
 	case EVENT_TYPE_ILL_CMD:
 		printk("ILLEGAL_COMMAND_ERROR address=0x%016llx]\n", address);
+		dump_command(address);
 		break;
 	case EVENT_TYPE_CMD_HARD_ERR:
 		printk("COMMAND_HARDWARE_ERROR address=0x%016llx "
-- 
cgit v1.2.3


From e394d72aa8b319211b8f947d151d9d50b0fde842 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Thu, 3 Sep 2009 15:28:33 +0200
Subject: x86/amd-iommu: Introduce function for iommu-local domain flush

This patch introduces a function to flush all domain tlbs
for on one given IOMMU. This is required later to reset the
command buffer on one IOMMU.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
 arch/x86/kernel/amd_iommu.c | 49 ++++++++++++++++++++++++++++++---------------
 1 file changed, 33 insertions(+), 16 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index e62b35f5df1..64cc582feb9 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -465,38 +465,55 @@ static void iommu_flush_tlb_pde(struct amd_iommu *iommu, u16 domid)
 }
 
 /*
- * This function is used to flush the IO/TLB for a given protection domain
- * on every IOMMU in the system
+ * This function flushes one domain on one IOMMU
  */
-static void iommu_flush_domain(u16 domid)
+static void flush_domain_on_iommu(struct amd_iommu *iommu, u16 domid)
 {
-	unsigned long flags;
-	struct amd_iommu *iommu;
 	struct iommu_cmd cmd;
-
-	INC_STATS_COUNTER(domain_flush_all);
+	unsigned long flags;
 
 	__iommu_build_inv_iommu_pages(&cmd, CMD_INV_IOMMU_ALL_PAGES_ADDRESS,
 				      domid, 1, 1);
 
-	for_each_iommu(iommu) {
-		spin_lock_irqsave(&iommu->lock, flags);
-		__iommu_queue_command(iommu, &cmd);
-		__iommu_completion_wait(iommu);
-		__iommu_wait_for_completion(iommu);
-		spin_unlock_irqrestore(&iommu->lock, flags);
-	}
+	spin_lock_irqsave(&iommu->lock, flags);
+	__iommu_queue_command(iommu, &cmd);
+	__iommu_completion_wait(iommu);
+	__iommu_wait_for_completion(iommu);
+	spin_unlock_irqrestore(&iommu->lock, flags);
 }
 
-void amd_iommu_flush_all_domains(void)
+static void flush_all_domains_on_iommu(struct amd_iommu *iommu)
 {
 	int i;
 
 	for (i = 1; i < MAX_DOMAIN_ID; ++i) {
 		if (!test_bit(i, amd_iommu_pd_alloc_bitmap))
 			continue;
-		iommu_flush_domain(i);
+		flush_domain_on_iommu(iommu, i);
 	}
+
+}
+
+/*
+ * This function is used to flush the IO/TLB for a given protection domain
+ * on every IOMMU in the system
+ */
+static void iommu_flush_domain(u16 domid)
+{
+	struct amd_iommu *iommu;
+
+	INC_STATS_COUNTER(domain_flush_all);
+
+	for_each_iommu(iommu)
+		flush_domain_on_iommu(iommu, domid);
+}
+
+void amd_iommu_flush_all_domains(void)
+{
+	struct amd_iommu *iommu;
+
+	for_each_iommu(iommu)
+		flush_all_domains_on_iommu(iommu);
 }
 
 void amd_iommu_flush_all_devices(void)
-- 
cgit v1.2.3


From f2430bd104bec2706315e9e983a9d9f828ff9565 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Wed, 26 Aug 2009 12:10:19 +0200
Subject: x86/amd-iommu: Remove some merge helper code

This patch removes some left-overs which where put into the code to
simplify merging code which also depends on changes in other trees.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
 arch/x86/kernel/amd_iommu.c | 6 ------
 1 file changed, 6 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index 6c99f503780..70fdef54e06 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -41,9 +41,7 @@ static DEFINE_RWLOCK(amd_iommu_devtable_lock);
 static LIST_HEAD(iommu_pd_list);
 static DEFINE_SPINLOCK(iommu_pd_list_lock);
 
-#ifdef CONFIG_IOMMU_API
 static struct iommu_ops amd_iommu_ops;
-#endif
 
 /*
  * general struct to manage commands send to an IOMMU
@@ -62,10 +60,6 @@ static void dma_ops_reserve_addresses(struct dma_ops_domain *dom,
 				      unsigned long start_page,
 				      unsigned int pages);
 
-#ifndef BUS_NOTIFY_UNBOUND_DRIVER
-#define BUS_NOTIFY_UNBOUND_DRIVER 0x0005
-#endif
-
 #ifdef CONFIG_AMD_IOMMU_STATS
 
 /*
-- 
cgit v1.2.3


From 4c6f40d4e0f0bba77a5f27eec4e1c6d1c457d324 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Tue, 1 Sep 2009 16:43:58 +0200
Subject: x86/amd-iommu: replace "AMD IOMMU" by "AMD-Vi"

This patch replaces the "AMD IOMMU" printk strings with the
official name for the hardware: "AMD-Vi".

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
 arch/x86/include/asm/amd_iommu_types.h |  2 +-
 arch/x86/kernel/amd_iommu.c            |  2 +-
 arch/x86/kernel/amd_iommu_init.c       | 12 ++++++------
 3 files changed, 8 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/amd_iommu_types.h b/arch/x86/include/asm/amd_iommu_types.h
index 0c878caaa0a..106e1305ef8 100644
--- a/arch/x86/include/asm/amd_iommu_types.h
+++ b/arch/x86/include/asm/amd_iommu_types.h
@@ -198,7 +198,7 @@ extern bool amd_iommu_dump;
 #define DUMP_printk(format, arg...)					\
 	do {								\
 		if (amd_iommu_dump)						\
-			printk(KERN_INFO "AMD IOMMU: " format, ## arg);	\
+			printk(KERN_INFO "AMD-Vi: " format, ## arg);	\
 	} while(0);
 
 /*
diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index 70fdef54e06..3e62d783652 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -141,7 +141,7 @@ static void iommu_print_event(void *__evt)
 	int flags = (event[1] >> EVENT_FLAGS_SHIFT) & EVENT_FLAGS_MASK;
 	u64 address = (u64)(((u64)event[3]) << 32) | event[2];
 
-	printk(KERN_ERR "AMD IOMMU: Event logged [");
+	printk(KERN_ERR "AMD-Vi: Event logged [");
 
 	switch (type) {
 	case EVENT_TYPE_ILL_DEV:
diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c
index c1b17e97252..169958ad624 100644
--- a/arch/x86/kernel/amd_iommu_init.c
+++ b/arch/x86/kernel/amd_iommu_init.c
@@ -252,7 +252,7 @@ static void __init iommu_feature_disable(struct amd_iommu *iommu, u8 bit)
 /* Function to enable the hardware */
 static void iommu_enable(struct amd_iommu *iommu)
 {
-	printk(KERN_INFO "AMD IOMMU: Enabling IOMMU at %s cap 0x%hx\n",
+	printk(KERN_INFO "AMD-Vi: Enabling IOMMU at %s cap 0x%hx\n",
 	       dev_name(&iommu->dev->dev), iommu->cap_ptr);
 
 	iommu_feature_enable(iommu, CONTROL_IOMMU_EN);
@@ -902,7 +902,7 @@ static int __init iommu_setup_msi(struct amd_iommu *iommu)
 
 	r = request_irq(iommu->dev->irq, amd_iommu_int_handler,
 			IRQF_SAMPLE_RANDOM,
-			"AMD IOMMU",
+			"AMD-Vi",
 			NULL);
 
 	if (r) {
@@ -1150,7 +1150,7 @@ int __init amd_iommu_init(void)
 
 
 	if (no_iommu) {
-		printk(KERN_INFO "AMD IOMMU disabled by kernel command line\n");
+		printk(KERN_INFO "AMD-Vi disabled by kernel command line\n");
 		return 0;
 	}
 
@@ -1248,16 +1248,16 @@ int __init amd_iommu_init(void)
 
 	enable_iommus();
 
-	printk(KERN_INFO "AMD IOMMU: device isolation ");
+	printk(KERN_INFO "AMD-Vi: device isolation ");
 	if (amd_iommu_isolate)
 		printk("enabled\n");
 	else
 		printk("disabled\n");
 
 	if (amd_iommu_unmap_flush)
-		printk(KERN_INFO "AMD IOMMU: IO/TLB flush on unmap enabled\n");
+		printk(KERN_INFO "AMD-Vi: IO/TLB flush on unmap enabled\n");
 	else
-		printk(KERN_INFO "AMD IOMMU: Lazy IO/TLB flushing enabled\n");
+		printk(KERN_INFO "AMD-Vi: Lazy IO/TLB flushing enabled\n");
 
 out:
 	return ret;
-- 
cgit v1.2.3


From ae908c22aa2b9f7d4b41bd02d14e473f79c22dd3 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Tue, 1 Sep 2009 16:52:16 +0200
Subject: x86/amd-iommu: Remove redundant 'IOMMU' string

The 'IOMMU: ' prefix is not necessary because the
DUMP_printk macro already prints its own prefix.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
 arch/x86/kernel/amd_iommu_init.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c
index 169958ad624..264b3ef9dd6 100644
--- a/arch/x86/kernel/amd_iommu_init.c
+++ b/arch/x86/kernel/amd_iommu_init.c
@@ -858,7 +858,7 @@ static int __init init_iommu_all(struct acpi_table_header *table)
 		switch (*p) {
 		case ACPI_IVHD_TYPE:
 
-			DUMP_printk("IOMMU: device: %02x:%02x.%01x cap: %04x "
+			DUMP_printk("device: %02x:%02x.%01x cap: %04x "
 				    "seg: %d flags: %01x info %04x\n",
 				    PCI_BUS(h->devid), PCI_SLOT(h->devid),
 				    PCI_FUNC(h->devid), h->cap_ptr,
-- 
cgit v1.2.3


From e0faf54ee82bf9c07f0307b4391caad4020bd659 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Thu, 3 Sep 2009 15:45:51 +0200
Subject: x86/amd-iommu: fix broken check in amd_iommu_flush_all_devices

The amd_iommu_pd_table is indexed by protection domain
number and not by device id. So this check is broken and
must be removed.

Cc: stable@kernel.org
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
 arch/x86/kernel/amd_iommu.c | 2 --
 1 file changed, 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index 3e62d783652..009d722af00 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -479,8 +479,6 @@ void amd_iommu_flush_all_devices(void)
 	int i;
 
 	for (i = 0; i <= amd_iommu_last_bdf; ++i) {
-		if (amd_iommu_pd_table[i] == NULL)
-			continue;
 
 		iommu = amd_iommu_rlookup_table[i];
 		if (!iommu)
-- 
cgit v1.2.3


From d586d7852ccd0cecb502bf4809f827e60c486af0 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Thu, 3 Sep 2009 15:39:23 +0200
Subject: x86/amd-iommu: Add function to flush all DTEs on one IOMMU

This function flushes all DTE entries on one IOMMU for all
devices behind this IOMMU. This is required for command
buffer resetting later.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
 arch/x86/kernel/amd_iommu.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index 64cc582feb9..2dc093370d2 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -516,6 +516,19 @@ void amd_iommu_flush_all_domains(void)
 		flush_all_domains_on_iommu(iommu);
 }
 
+static void flush_all_devices_for_iommu(struct amd_iommu *iommu)
+{
+	int i;
+
+	for (i = 0; i <= amd_iommu_last_bdf; ++i) {
+		if (iommu != amd_iommu_rlookup_table[i])
+			continue;
+
+		iommu_queue_inv_dev_entry(iommu, i);
+		iommu_completion_wait(iommu);
+	}
+}
+
 void amd_iommu_flush_all_devices(void)
 {
 	struct amd_iommu *iommu;
-- 
cgit v1.2.3


From 93f1cc67cf3196174412adca87321b25c1c986b0 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Thu, 3 Sep 2009 14:50:20 +0200
Subject: x86/amd-iommu: Add reset function for command buffers

This patch factors parts of the command buffer
initialization code into a seperate function which can be
used to reset the command buffer later.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
 arch/x86/include/asm/amd_iommu_types.h |  3 +++
 arch/x86/kernel/amd_iommu_init.c       | 20 +++++++++++++++-----
 2 files changed, 18 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/amd_iommu_types.h b/arch/x86/include/asm/amd_iommu_types.h
index 0c878caaa0a..c54bc979dc1 100644
--- a/arch/x86/include/asm/amd_iommu_types.h
+++ b/arch/x86/include/asm/amd_iommu_types.h
@@ -457,4 +457,7 @@ static inline void amd_iommu_stats_init(void) { }
 
 #endif /* CONFIG_AMD_IOMMU_STATS */
 
+/* some function prototypes */
+extern void amd_iommu_reset_cmd_buffer(struct amd_iommu *iommu);
+
 #endif /* _ASM_X86_AMD_IOMMU_TYPES_H */
diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c
index c1b17e97252..1752afef948 100644
--- a/arch/x86/kernel/amd_iommu_init.c
+++ b/arch/x86/kernel/amd_iommu_init.c
@@ -434,6 +434,20 @@ static u8 * __init alloc_command_buffer(struct amd_iommu *iommu)
 	return cmd_buf;
 }
 
+/*
+ * This function resets the command buffer if the IOMMU stopped fetching
+ * commands from it.
+ */
+void amd_iommu_reset_cmd_buffer(struct amd_iommu *iommu)
+{
+	iommu_feature_disable(iommu, CONTROL_CMDBUF_EN);
+
+	writel(0x00, iommu->mmio_base + MMIO_CMD_HEAD_OFFSET);
+	writel(0x00, iommu->mmio_base + MMIO_CMD_TAIL_OFFSET);
+
+	iommu_feature_enable(iommu, CONTROL_CMDBUF_EN);
+}
+
 /*
  * This function writes the command buffer address to the hardware and
  * enables it.
@@ -450,11 +464,7 @@ static void iommu_enable_command_buffer(struct amd_iommu *iommu)
 	memcpy_toio(iommu->mmio_base + MMIO_CMD_BUF_OFFSET,
 		    &entry, sizeof(entry));
 
-	/* set head and tail to zero manually */
-	writel(0x00, iommu->mmio_base + MMIO_CMD_HEAD_OFFSET);
-	writel(0x00, iommu->mmio_base + MMIO_CMD_TAIL_OFFSET);
-
-	iommu_feature_enable(iommu, CONTROL_CMDBUF_EN);
+	amd_iommu_reset_cmd_buffer(iommu);
 }
 
 static void __init free_command_buffer(struct amd_iommu *iommu)
-- 
cgit v1.2.3


From a345b23b79f1900e7d87c3165182504419180de4 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Thu, 3 Sep 2009 15:01:43 +0200
Subject: x86/amd-iommu: Reset command buffer on ILLEGAL_COMMAND_ERROR

On an ILLEGAL_COMMAND_ERROR the IOMMU stops executing
further commands. This patch changes the code to handle this
case better by resetting the command buffer in the IOMMU.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
 arch/x86/kernel/amd_iommu.c | 15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index 2dc093370d2..2333d615f5e 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -61,6 +61,7 @@ static u64* alloc_pte(struct protection_domain *dom,
 static void dma_ops_reserve_addresses(struct dma_ops_domain *dom,
 				      unsigned long start_page,
 				      unsigned int pages);
+static void reset_iommu_command_buffer(struct amd_iommu *iommu);
 
 #ifndef BUS_NOTIFY_UNBOUND_DRIVER
 #define BUS_NOTIFY_UNBOUND_DRIVER 0x0005
@@ -156,7 +157,7 @@ static void dump_command(unsigned long phys_addr)
 		pr_err("AMD-Vi: CMD[%d]: %08x\n", i, cmd->data[i]);
 }
 
-static void iommu_print_event(void *__evt)
+static void iommu_print_event(struct amd_iommu *iommu, void *__evt)
 {
 	u32 *event = __evt;
 	int type  = (event[1] >> EVENT_TYPE_SHIFT)  & EVENT_TYPE_MASK;
@@ -195,6 +196,7 @@ static void iommu_print_event(void *__evt)
 		break;
 	case EVENT_TYPE_ILL_CMD:
 		printk("ILLEGAL_COMMAND_ERROR address=0x%016llx]\n", address);
+		reset_iommu_command_buffer(iommu);
 		dump_command(address);
 		break;
 	case EVENT_TYPE_CMD_HARD_ERR:
@@ -229,7 +231,7 @@ static void iommu_poll_events(struct amd_iommu *iommu)
 	tail = readl(iommu->mmio_base + MMIO_EVT_TAIL_OFFSET);
 
 	while (head != tail) {
-		iommu_print_event(iommu->evt_buf + head);
+		iommu_print_event(iommu, iommu->evt_buf + head);
 		head = (head + EVENT_ENTRY_SIZE) % iommu->evt_buf_size;
 	}
 
@@ -547,6 +549,15 @@ void amd_iommu_flush_all_devices(void)
 	}
 }
 
+static void reset_iommu_command_buffer(struct amd_iommu *iommu)
+{
+	pr_err("AMD-Vi: Resetting IOMMU command buffer\n");
+
+	amd_iommu_reset_cmd_buffer(iommu);
+	flush_all_devices_for_iommu(iommu);
+	flush_all_domains_on_iommu(iommu);
+}
+
 /****************************************************************************
  *
  * The functions below are used the create the page table mappings for
-- 
cgit v1.2.3


From b26e81b871bd18184968f0bb3f12945906eadfce Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Thu, 3 Sep 2009 15:08:09 +0200
Subject: x86/amd-iommu: Panic if IOMMU command buffer reset fails

To prevent the driver from doing recursive command buffer
resets, just panic when that recursion happens.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
 arch/x86/include/asm/amd_iommu_types.h | 3 +++
 arch/x86/kernel/amd_iommu.c            | 7 +++++++
 2 files changed, 10 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/include/asm/amd_iommu_types.h b/arch/x86/include/asm/amd_iommu_types.h
index c54bc979dc1..e676746a4a3 100644
--- a/arch/x86/include/asm/amd_iommu_types.h
+++ b/arch/x86/include/asm/amd_iommu_types.h
@@ -337,6 +337,9 @@ struct amd_iommu {
 	/* if one, we need to send a completion wait command */
 	bool need_sync;
 
+	/* becomes true if a command buffer reset is running */
+	bool reset_in_progress;
+
 	/* default dma_ops domain for that IOMMU */
 	struct dma_ops_domain *default_dom;
 };
diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index 2333d615f5e..b62a2f64dfc 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -553,9 +553,16 @@ static void reset_iommu_command_buffer(struct amd_iommu *iommu)
 {
 	pr_err("AMD-Vi: Resetting IOMMU command buffer\n");
 
+	if (iommu->reset_in_progress)
+		panic("AMD-Vi: ILLEGAL_COMMAND_ERROR while resetting command buffer\n");
+
+	iommu->reset_in_progress = true;
+
 	amd_iommu_reset_cmd_buffer(iommu);
 	flush_all_devices_for_iommu(iommu);
 	flush_all_domains_on_iommu(iommu);
+
+	iommu->reset_in_progress = false;
 }
 
 /****************************************************************************
-- 
cgit v1.2.3


From 6a1eddd2f951656a6abbd42e2cddc2267c4a639d Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Thu, 3 Sep 2009 15:15:10 +0200
Subject: x86/amd-iommu: Reset command buffer if wait loop fails

Instead of a panic on an comletion wait loop failure, try to
recover from that event from resetting the command buffer.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
 arch/x86/kernel/amd_iommu.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index b62a2f64dfc..cfca80bfe75 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -318,8 +318,11 @@ static void __iommu_wait_for_completion(struct amd_iommu *iommu)
 	status &= ~MMIO_STATUS_COM_WAIT_INT_MASK;
 	writel(status, iommu->mmio_base + MMIO_STATUS_OFFSET);
 
-	if (unlikely(i == EXIT_LOOP_COUNT))
-		panic("AMD IOMMU: Completion wait loop failed\n");
+	if (unlikely(i == EXIT_LOOP_COUNT)) {
+		spin_unlock(&iommu->lock);
+		reset_iommu_command_buffer(iommu);
+		spin_lock(&iommu->lock);
+	}
 }
 
 /*
-- 
cgit v1.2.3


From 9355a08186e52b7c120adea91c984923b54efa10 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Wed, 2 Sep 2009 14:24:08 +0200
Subject: x86/amd-iommu: Make fetch_pte aware of dynamic mapping levels

This patch changes the fetch_pte function in the AMD IOMMU
driver to support dynamic mapping levels.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
 arch/x86/include/asm/amd_iommu_types.h |  9 +++++++++
 arch/x86/kernel/amd_iommu.c            | 24 +++++++++++++-----------
 2 files changed, 22 insertions(+), 11 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/amd_iommu_types.h b/arch/x86/include/asm/amd_iommu_types.h
index 0c878caaa0a..7fce4ef77bd 100644
--- a/arch/x86/include/asm/amd_iommu_types.h
+++ b/arch/x86/include/asm/amd_iommu_types.h
@@ -146,12 +146,21 @@
 #define PAGE_MODE_1_LEVEL 0x01
 #define PAGE_MODE_2_LEVEL 0x02
 #define PAGE_MODE_3_LEVEL 0x03
+#define PAGE_MODE_4_LEVEL 0x04
+#define PAGE_MODE_5_LEVEL 0x05
+#define PAGE_MODE_6_LEVEL 0x06
 
 #define IOMMU_PDE_NL_0   0x000ULL
 #define IOMMU_PDE_NL_1   0x200ULL
 #define IOMMU_PDE_NL_2   0x400ULL
 #define IOMMU_PDE_NL_3   0x600ULL
 
+#define PM_LEVEL_SHIFT(x)	(12 + ((x) * 9))
+#define PM_LEVEL_SIZE(x)	(((x) < 6) ? \
+				  ((1ULL << PM_LEVEL_SHIFT((x))) - 1): \
+				   (0xffffffffffffffffULL))
+#define PM_LEVEL_INDEX(x, a)	(((a) >> PM_LEVEL_SHIFT((x))) & 0x1ffULL)
+
 #define IOMMU_PTE_L2_INDEX(address) (((address) >> 30) & 0x1ffULL)
 #define IOMMU_PTE_L1_INDEX(address) (((address) >> 21) & 0x1ffULL)
 #define IOMMU_PTE_L0_INDEX(address) (((address) >> 12) & 0x1ffULL)
diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index 6c99f503780..29bcd358b6c 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -61,6 +61,8 @@ static u64* alloc_pte(struct protection_domain *dom,
 static void dma_ops_reserve_addresses(struct dma_ops_domain *dom,
 				      unsigned long start_page,
 				      unsigned int pages);
+static u64 *fetch_pte(struct protection_domain *domain,
+		      unsigned long address);
 
 #ifndef BUS_NOTIFY_UNBOUND_DRIVER
 #define BUS_NOTIFY_UNBOUND_DRIVER 0x0005
@@ -670,24 +672,24 @@ static int init_unity_mappings_for_device(struct dma_ops_domain *dma_dom,
  * This function checks if there is a PTE for a given dma address. If
  * there is one, it returns the pointer to it.
  */
-static u64* fetch_pte(struct protection_domain *domain,
+static u64 *fetch_pte(struct protection_domain *domain,
 		      unsigned long address)
 {
+	int level;
 	u64 *pte;
 
-	pte = &domain->pt_root[IOMMU_PTE_L2_INDEX(address)];
+	level =  domain->mode - 1;
+	pte   = &domain->pt_root[PM_LEVEL_INDEX(level, address)];
 
-	if (!IOMMU_PTE_PRESENT(*pte))
-		return NULL;
+	while (level > 0) {
+		if (!IOMMU_PTE_PRESENT(*pte))
+			return NULL;
 
-	pte = IOMMU_PTE_PAGE(*pte);
-	pte = &pte[IOMMU_PTE_L1_INDEX(address)];
+		level -= 1;
 
-	if (!IOMMU_PTE_PRESENT(*pte))
-		return NULL;
-
-	pte = IOMMU_PTE_PAGE(*pte);
-	pte = &pte[IOMMU_PTE_L0_INDEX(address)];
+		pte = IOMMU_PTE_PAGE(*pte);
+		pte = &pte[PM_LEVEL_INDEX(level, address)];
+	}
 
 	return pte;
 }
-- 
cgit v1.2.3


From 38a76eeeafb251bf67d143a34b37a8105cff302e Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Wed, 2 Sep 2009 17:02:47 +0200
Subject: x86/amd-iommu: Use fetch_pte in iommu_unmap_page

Instead of reimplementing existing logic use fetch_pte to
walk the page table in iommu_unmap_page.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
 arch/x86/kernel/amd_iommu.c | 19 +++----------------
 1 file changed, 3 insertions(+), 16 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index 29bcd358b6c..5e527989999 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -546,23 +546,10 @@ static int iommu_map_page(struct protection_domain *dom,
 static void iommu_unmap_page(struct protection_domain *dom,
 			     unsigned long bus_addr)
 {
-	u64 *pte;
-
-	pte = &dom->pt_root[IOMMU_PTE_L2_INDEX(bus_addr)];
-
-	if (!IOMMU_PTE_PRESENT(*pte))
-		return;
-
-	pte = IOMMU_PTE_PAGE(*pte);
-	pte = &pte[IOMMU_PTE_L1_INDEX(bus_addr)];
-
-	if (!IOMMU_PTE_PRESENT(*pte))
-		return;
-
-	pte = IOMMU_PTE_PAGE(*pte);
-	pte = &pte[IOMMU_PTE_L1_INDEX(bus_addr)];
+	u64 *pte = fetch_pte(dom, bus_addr);
 
-	*pte = 0;
+	if (pte)
+		*pte = 0;
 }
 
 /*
-- 
cgit v1.2.3


From a6d41a4027b758a9473197a78fab45afb31003aa Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Wed, 2 Sep 2009 17:08:55 +0200
Subject: x86/amd-iommu: Use fetch_pte in amd_iommu_iova_to_phys

Don't reimplement the page table walker in this function.
Use the generic one.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
 arch/x86/kernel/amd_iommu.c | 16 ++--------------
 1 file changed, 2 insertions(+), 14 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index 5e527989999..4a54366d422 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -2140,21 +2140,9 @@ static phys_addr_t amd_iommu_iova_to_phys(struct iommu_domain *dom,
 	phys_addr_t paddr;
 	u64 *pte;
 
-	pte = &domain->pt_root[IOMMU_PTE_L2_INDEX(iova)];
+	pte = fetch_pte(domain, iova);
 
-	if (!IOMMU_PTE_PRESENT(*pte))
-		return 0;
-
-	pte = IOMMU_PTE_PAGE(*pte);
-	pte = &pte[IOMMU_PTE_L1_INDEX(iova)];
-
-	if (!IOMMU_PTE_PRESENT(*pte))
-		return 0;
-
-	pte = IOMMU_PTE_PAGE(*pte);
-	pte = &pte[IOMMU_PTE_L0_INDEX(iova)];
-
-	if (!IOMMU_PTE_PRESENT(*pte))
+	if (!pte || !IOMMU_PTE_PRESENT(*pte))
 		return 0;
 
 	paddr  = *pte & IOMMU_PAGE_MASK;
-- 
cgit v1.2.3


From 6a0dbcbe4e612fbc9d73cd4dde8ebef19295058a Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Wed, 2 Sep 2009 15:41:59 +0200
Subject: x86/amd-iommu: Add a gneric version of amd_iommu_flush_all_devices

This patch adds a generic variant of
amd_iommu_flush_all_devices function which flushes only the
DTEs for a given protection domain.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
 arch/x86/kernel/amd_iommu.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index 4a54366d422..5265dd17eb5 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -481,13 +481,14 @@ void amd_iommu_flush_all_domains(void)
 	}
 }
 
-void amd_iommu_flush_all_devices(void)
+static void flush_devices_by_domain(struct protection_domain *domain)
 {
 	struct amd_iommu *iommu;
 	int i;
 
 	for (i = 0; i <= amd_iommu_last_bdf; ++i) {
-		if (amd_iommu_pd_table[i] == NULL)
+		if ((domain == NULL && amd_iommu_pd_table[i] == NULL) ||
+		    (amd_iommu_pd_table[i] != domain))
 			continue;
 
 		iommu = amd_iommu_rlookup_table[i];
@@ -499,6 +500,11 @@ void amd_iommu_flush_all_devices(void)
 	}
 }
 
+void amd_iommu_flush_all_devices(void)
+{
+	flush_devices_by_domain(NULL);
+}
+
 /****************************************************************************
  *
  * The functions below are used the create the page table mappings for
-- 
cgit v1.2.3


From 407d733e30a97daf5ea6f9eb5f9ebbd42a0a9ef2 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Wed, 2 Sep 2009 16:07:00 +0200
Subject: x86/amd-iommu: Introduce set_dte_entry function

This function factors out some logic of attach_device to a
seperate function. This new function will be used to update
device table entries when necessary.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
 arch/x86/kernel/amd_iommu.c | 27 +++++++++++++++++----------
 1 file changed, 17 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index 5265dd17eb5..0fab1f1d135 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -1058,18 +1058,10 @@ static struct protection_domain *domain_for_device(u16 devid)
 	return dom;
 }
 
-/*
- * If a device is not yet associated with a domain, this function does
- * assigns it visible for the hardware
- */
-static void attach_device(struct amd_iommu *iommu,
-			  struct protection_domain *domain,
-			  u16 devid)
+static void set_dte_entry(u16 devid, struct protection_domain *domain)
 {
-	unsigned long flags;
 	u64 pte_root = virt_to_phys(domain->pt_root);
-
-	domain->dev_cnt += 1;
+	unsigned long flags;
 
 	pte_root |= (domain->mode & DEV_ENTRY_MODE_MASK)
 		    << DEV_ENTRY_MODE_SHIFT;
@@ -1082,6 +1074,21 @@ static void attach_device(struct amd_iommu *iommu,
 
 	amd_iommu_pd_table[devid] = domain;
 	write_unlock_irqrestore(&amd_iommu_devtable_lock, flags);
+}
+
+/*
+ * If a device is not yet associated with a domain, this function does
+ * assigns it visible for the hardware
+ */
+static void attach_device(struct amd_iommu *iommu,
+			  struct protection_domain *domain,
+			  u16 devid)
+{
+	/* set the DTE entry */
+	set_dte_entry(devid, domain);
+
+	/* increase reference counter */
+	domain->dev_cnt += 1;
 
        /*
         * We might boot into a crash-kernel here. The crashed kernel
-- 
cgit v1.2.3


From 04bfdd8406099fca2e6b8844748c4d6c5eba8c8d Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Wed, 2 Sep 2009 16:00:23 +0200
Subject: x86/amd-iommu: Flush domains if address space size was increased

Thist patch introduces the update_domain function which
propagates the larger address space of a protection domain
to the device table and flushes all relevant DTEs and the
domain TLB.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
 arch/x86/include/asm/amd_iommu_types.h |  1 +
 arch/x86/kernel/amd_iommu.c            | 32 ++++++++++++++++++++++++++++++++
 2 files changed, 33 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/include/asm/amd_iommu_types.h b/arch/x86/include/asm/amd_iommu_types.h
index 7fce4ef77bd..97f3d09d3be 100644
--- a/arch/x86/include/asm/amd_iommu_types.h
+++ b/arch/x86/include/asm/amd_iommu_types.h
@@ -235,6 +235,7 @@ struct protection_domain {
 	int mode;		/* paging mode (0-6 levels) */
 	u64 *pt_root;		/* page table root pointer */
 	unsigned long flags;	/* flags to find out type of domain */
+	bool updated;		/* complete domain flush required */
 	unsigned dev_cnt;	/* devices assigned to this domain */
 	void *priv;		/* private data */
 };
diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index 0fab1f1d135..5eab6a84b9c 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -63,6 +63,7 @@ static void dma_ops_reserve_addresses(struct dma_ops_domain *dom,
 				      unsigned int pages);
 static u64 *fetch_pte(struct protection_domain *domain,
 		      unsigned long address);
+static void update_domain(struct protection_domain *domain);
 
 #ifndef BUS_NOTIFY_UNBOUND_DRIVER
 #define BUS_NOTIFY_UNBOUND_DRIVER 0x0005
@@ -546,6 +547,8 @@ static int iommu_map_page(struct protection_domain *dom,
 
 	*pte = __pte;
 
+	update_domain(dom);
+
 	return 0;
 }
 
@@ -762,9 +765,13 @@ static int alloc_new_range(struct amd_iommu *iommu,
 		dma_ops_reserve_addresses(dma_dom, i << PAGE_SHIFT, 1);
 	}
 
+	update_domain(&dma_dom->domain);
+
 	return 0;
 
 out_free:
+	update_domain(&dma_dom->domain);
+
 	free_page((unsigned long)dma_dom->aperture[index]->bitmap);
 
 	kfree(dma_dom->aperture[index]);
@@ -1294,6 +1301,29 @@ static int get_device_resources(struct device *dev,
 	return 1;
 }
 
+static void update_device_table(struct protection_domain *domain)
+{
+	int i;
+
+	for (i = 0; i <= amd_iommu_last_bdf; ++i) {
+		if (amd_iommu_pd_table[i] != domain)
+			continue;
+		set_dte_entry(i, domain);
+	}
+}
+
+static void update_domain(struct protection_domain *domain)
+{
+	if (!domain->updated)
+		return;
+
+	update_device_table(domain);
+	flush_devices_by_domain(domain);
+	iommu_flush_domain(domain->id);
+
+	domain->updated = false;
+}
+
 /*
  * If the pte_page is not yet allocated this function is called
  */
@@ -1351,6 +1381,8 @@ static u64* dma_ops_get_pte(struct dma_ops_domain *dom,
 	} else
 		pte += IOMMU_PTE_L0_INDEX(address);
 
+	update_domain(&dom->domain);
+
 	return pte;
 }
 
-- 
cgit v1.2.3


From 50020fb6324465e478d6c8cdbf3c695f0a60358d Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Wed, 2 Sep 2009 15:38:40 +0200
Subject: x86/amd-iommu: Introduce increase_address_space function

This function will be used to increase the address space
size of a protection domain.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
 arch/x86/include/asm/amd_iommu_types.h |  4 ++++
 arch/x86/kernel/amd_iommu.c            | 27 +++++++++++++++++++++++++++
 2 files changed, 31 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/include/asm/amd_iommu_types.h b/arch/x86/include/asm/amd_iommu_types.h
index 97f3d09d3be..1b4b3d6c9f0 100644
--- a/arch/x86/include/asm/amd_iommu_types.h
+++ b/arch/x86/include/asm/amd_iommu_types.h
@@ -160,6 +160,10 @@
 				  ((1ULL << PM_LEVEL_SHIFT((x))) - 1): \
 				   (0xffffffffffffffffULL))
 #define PM_LEVEL_INDEX(x, a)	(((a) >> PM_LEVEL_SHIFT((x))) & 0x1ffULL)
+#define PM_LEVEL_ENC(x)		(((x) << 9) & 0xe00ULL)
+#define PM_LEVEL_PDE(x, a)	((a) | PM_LEVEL_ENC((x)) | \
+				 IOMMU_PTE_P | IOMMU_PTE_IR | IOMMU_PTE_IW)
+
 
 #define IOMMU_PTE_L2_INDEX(address) (((address) >> 30) & 0x1ffULL)
 #define IOMMU_PTE_L1_INDEX(address) (((address) >> 21) & 0x1ffULL)
diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index 5eab6a84b9c..fc97b51f028 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -1324,6 +1324,33 @@ static void update_domain(struct protection_domain *domain)
 	domain->updated = false;
 }
 
+/*
+ * This function is used to add another level to an IO page table. Adding
+ * another level increases the size of the address space by 9 bits to a size up
+ * to 64 bits.
+ */
+static bool increase_address_space(struct protection_domain *domain,
+				   gfp_t gfp)
+{
+	u64 *pte;
+
+	if (domain->mode == PAGE_MODE_6_LEVEL)
+		/* address space already 64 bit large */
+		return false;
+
+	pte = (void *)get_zeroed_page(gfp);
+	if (!pte)
+		return false;
+
+	*pte             = PM_LEVEL_PDE(domain->mode,
+					virt_to_phys(domain->pt_root));
+	domain->pt_root  = pte;
+	domain->mode    += 1;
+	domain->updated  = true;
+
+	return true;
+}
+
 /*
  * If the pte_page is not yet allocated this function is called
  */
-- 
cgit v1.2.3


From 8bc3e127421bf3b735edbde05135892c12c5f615 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Wed, 2 Sep 2009 16:48:40 +0200
Subject: x86/amd-iommu: Change alloc_pte to support 64 bit address space

This patch changes the alloc_pte function to be able to map
pages into the whole 64 bit address space supported by AMD
IOMMU hardware from the old limit of 2**39 bytes.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
 arch/x86/kernel/amd_iommu.c | 44 ++++++++++++++++++++------------------------
 1 file changed, 20 insertions(+), 24 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index fc97b51f028..3be2b61fc31 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -55,7 +55,7 @@ struct iommu_cmd {
 static int dma_ops_unity_map(struct dma_ops_domain *dma_dom,
 			     struct unity_map_entry *e);
 static struct dma_ops_domain *find_protection_domain(u16 devid);
-static u64* alloc_pte(struct protection_domain *dom,
+static u64 *alloc_pte(struct protection_domain *domain,
 		      unsigned long address, u64
 		      **pte_page, gfp_t gfp);
 static void dma_ops_reserve_addresses(struct dma_ops_domain *dom,
@@ -1351,39 +1351,35 @@ static bool increase_address_space(struct protection_domain *domain,
 	return true;
 }
 
-/*
- * If the pte_page is not yet allocated this function is called
- */
-static u64* alloc_pte(struct protection_domain *dom,
+static u64 *alloc_pte(struct protection_domain *domain,
 		      unsigned long address, u64 **pte_page, gfp_t gfp)
 {
 	u64 *pte, *page;
+	int level;
 
-	pte = &dom->pt_root[IOMMU_PTE_L2_INDEX(address)];
+	while (address > PM_LEVEL_SIZE(domain->mode))
+		increase_address_space(domain, gfp);
 
-	if (!IOMMU_PTE_PRESENT(*pte)) {
-		page = (u64 *)get_zeroed_page(gfp);
-		if (!page)
-			return NULL;
-		*pte = IOMMU_L2_PDE(virt_to_phys(page));
-	}
+	level =  domain->mode - 1;
+	pte   = &domain->pt_root[PM_LEVEL_INDEX(level, address)];
 
-	pte = IOMMU_PTE_PAGE(*pte);
-	pte = &pte[IOMMU_PTE_L1_INDEX(address)];
+	while (level > 0) {
+		if (!IOMMU_PTE_PRESENT(*pte)) {
+			page = (u64 *)get_zeroed_page(gfp);
+			if (!page)
+				return NULL;
+			*pte = PM_LEVEL_PDE(level, virt_to_phys(page));
+		}
 
-	if (!IOMMU_PTE_PRESENT(*pte)) {
-		page = (u64 *)get_zeroed_page(gfp);
-		if (!page)
-			return NULL;
-		*pte = IOMMU_L1_PDE(virt_to_phys(page));
-	}
+		level -= 1;
 
-	pte = IOMMU_PTE_PAGE(*pte);
+		pte = IOMMU_PTE_PAGE(*pte);
 
-	if (pte_page)
-		*pte_page = pte;
+		if (pte_page && level == 0)
+			*pte_page = pte;
 
-	pte = &pte[IOMMU_PTE_L0_INDEX(address)];
+		pte = &pte[PM_LEVEL_INDEX(level, address)];
+	}
 
 	return pte;
 }
-- 
cgit v1.2.3


From 8c8c143cdc95ebe50fd962917556e25e8912997b Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Wed, 2 Sep 2009 17:30:00 +0200
Subject: x86/amd-iommu: Remove last usages of IOMMU_PTE_L0_INDEX

This change allows to remove these old macros later.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
 arch/x86/kernel/amd_iommu.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index 3be2b61fc31..ebc1c844392 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -1402,7 +1402,7 @@ static u64* dma_ops_get_pte(struct dma_ops_domain *dom,
 		pte = alloc_pte(&dom->domain, address, &pte_page, GFP_ATOMIC);
 		aperture->pte_pages[APERTURE_PAGE_INDEX(address)] = pte_page;
 	} else
-		pte += IOMMU_PTE_L0_INDEX(address);
+		pte += PM_LEVEL_INDEX(0, address);
 
 	update_domain(&dom->domain);
 
@@ -1466,7 +1466,7 @@ static void dma_ops_domain_unmap(struct amd_iommu *iommu,
 	if (!pte)
 		return;
 
-	pte += IOMMU_PTE_L0_INDEX(address);
+	pte += PM_LEVEL_INDEX(0, address);
 
 	WARN_ON(!*pte);
 
-- 
cgit v1.2.3


From bad1cac28a707c69301a4d0612da9ccbecd51953 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Wed, 2 Sep 2009 16:52:23 +0200
Subject: x86/amd-iommu: Remove bus_addr check in iommu_map_page

The driver now supports full 64 bit device address spaces.
So this check is not longer required.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
 arch/x86/kernel/amd_iommu.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index ebc1c844392..6ffb3e63765 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -530,8 +530,7 @@ static int iommu_map_page(struct protection_domain *dom,
 	bus_addr  = PAGE_ALIGN(bus_addr);
 	phys_addr = PAGE_ALIGN(phys_addr);
 
-	/* only support 512GB address spaces for now */
-	if (bus_addr > IOMMU_MAP_SIZE_L3 || !(prot & IOMMU_PROT_MASK))
+	if (!(prot & IOMMU_PROT_MASK))
 		return -EINVAL;
 
 	pte = alloc_pte(dom, bus_addr, NULL, GFP_KERNEL);
-- 
cgit v1.2.3


From 8f7a017ce05ed4522809448e169daa44fe6edeb1 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Wed, 2 Sep 2009 16:55:24 +0200
Subject: x86/amd-iommu: Use 2-level page tables for dma_ops domains

The driver now supports a dynamic number of levels for IO
page tables. This allows to reduce the number of levels for
dma_ops domains by one because a dma_ops domain has usually
an address space size between 128MB and 4G.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
 arch/x86/kernel/amd_iommu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index 6ffb3e63765..addf6588c36 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -1010,7 +1010,7 @@ static struct dma_ops_domain *dma_ops_domain_alloc(struct amd_iommu *iommu)
 	dma_dom->domain.id = domain_id_alloc();
 	if (dma_dom->domain.id == 0)
 		goto free_dma_dom;
-	dma_dom->domain.mode = PAGE_MODE_3_LEVEL;
+	dma_dom->domain.mode = PAGE_MODE_2_LEVEL;
 	dma_dom->domain.pt_root = (void *)get_zeroed_page(GFP_KERNEL);
 	dma_dom->domain.flags = PD_DMA_OPS_MASK;
 	dma_dom->domain.priv = dma_dom;
-- 
cgit v1.2.3


From 674d798a80cb6ea1defa01899099f40d9124423c Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Wed, 2 Sep 2009 17:26:09 +0200
Subject: x86/amd-iommu: Remove old page table handling macros

These macros are not longer required. So remove them.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
 arch/x86/include/asm/amd_iommu_types.h | 19 -------------------
 1 file changed, 19 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/amd_iommu_types.h b/arch/x86/include/asm/amd_iommu_types.h
index 1b4b3d6c9f0..d66430de5f7 100644
--- a/arch/x86/include/asm/amd_iommu_types.h
+++ b/arch/x86/include/asm/amd_iommu_types.h
@@ -150,11 +150,6 @@
 #define PAGE_MODE_5_LEVEL 0x05
 #define PAGE_MODE_6_LEVEL 0x06
 
-#define IOMMU_PDE_NL_0   0x000ULL
-#define IOMMU_PDE_NL_1   0x200ULL
-#define IOMMU_PDE_NL_2   0x400ULL
-#define IOMMU_PDE_NL_3   0x600ULL
-
 #define PM_LEVEL_SHIFT(x)	(12 + ((x) * 9))
 #define PM_LEVEL_SIZE(x)	(((x) < 6) ? \
 				  ((1ULL << PM_LEVEL_SHIFT((x))) - 1): \
@@ -164,15 +159,6 @@
 #define PM_LEVEL_PDE(x, a)	((a) | PM_LEVEL_ENC((x)) | \
 				 IOMMU_PTE_P | IOMMU_PTE_IR | IOMMU_PTE_IW)
 
-
-#define IOMMU_PTE_L2_INDEX(address) (((address) >> 30) & 0x1ffULL)
-#define IOMMU_PTE_L1_INDEX(address) (((address) >> 21) & 0x1ffULL)
-#define IOMMU_PTE_L0_INDEX(address) (((address) >> 12) & 0x1ffULL)
-
-#define IOMMU_MAP_SIZE_L1 (1ULL << 21)
-#define IOMMU_MAP_SIZE_L2 (1ULL << 30)
-#define IOMMU_MAP_SIZE_L3 (1ULL << 39)
-
 #define IOMMU_PTE_P  (1ULL << 0)
 #define IOMMU_PTE_TV (1ULL << 1)
 #define IOMMU_PTE_U  (1ULL << 59)
@@ -180,11 +166,6 @@
 #define IOMMU_PTE_IR (1ULL << 61)
 #define IOMMU_PTE_IW (1ULL << 62)
 
-#define IOMMU_L1_PDE(address) \
-	((address) | IOMMU_PDE_NL_1 | IOMMU_PTE_P | IOMMU_PTE_IR | IOMMU_PTE_IW)
-#define IOMMU_L2_PDE(address) \
-	((address) | IOMMU_PDE_NL_2 | IOMMU_PTE_P | IOMMU_PTE_IR | IOMMU_PTE_IW)
-
 #define IOMMU_PAGE_MASK (((1ULL << 52) - 1) & ~0xfffULL)
 #define IOMMU_PTE_PRESENT(pte) ((pte) & IOMMU_PTE_P)
 #define IOMMU_PTE_PAGE(pte) (phys_to_virt((pte) & IOMMU_PAGE_MASK))
-- 
cgit v1.2.3


From a6b256b41357c33ccb2d105a4457e22bdc83e021 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Thu, 3 Sep 2009 12:21:31 +0200
Subject: x86/amd-iommu: Support higher level PTEs in iommu_page_unmap

This patch changes fetch_pte and iommu_page_unmap to support
different page sizes too.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
 arch/x86/include/asm/amd_iommu_types.h |  1 +
 arch/x86/kernel/amd_iommu.c            | 21 +++++++++++++--------
 2 files changed, 14 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/amd_iommu_types.h b/arch/x86/include/asm/amd_iommu_types.h
index d66430de5f7..351ca39ece0 100644
--- a/arch/x86/include/asm/amd_iommu_types.h
+++ b/arch/x86/include/asm/amd_iommu_types.h
@@ -158,6 +158,7 @@
 #define PM_LEVEL_ENC(x)		(((x) << 9) & 0xe00ULL)
 #define PM_LEVEL_PDE(x, a)	((a) | PM_LEVEL_ENC((x)) | \
 				 IOMMU_PTE_P | IOMMU_PTE_IR | IOMMU_PTE_IW)
+#define PM_PTE_LEVEL(pte)	(((pte) >> 9) & 0x7ULL)
 
 #define IOMMU_PTE_P  (1ULL << 0)
 #define IOMMU_PTE_TV (1ULL << 1)
diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index addf6588c36..002cf9cab9e 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -62,7 +62,7 @@ static void dma_ops_reserve_addresses(struct dma_ops_domain *dom,
 				      unsigned long start_page,
 				      unsigned int pages);
 static u64 *fetch_pte(struct protection_domain *domain,
-		      unsigned long address);
+		      unsigned long address, int map_size);
 static void update_domain(struct protection_domain *domain);
 
 #ifndef BUS_NOTIFY_UNBOUND_DRIVER
@@ -552,9 +552,9 @@ static int iommu_map_page(struct protection_domain *dom,
 }
 
 static void iommu_unmap_page(struct protection_domain *dom,
-			     unsigned long bus_addr)
+			     unsigned long bus_addr, int map_size)
 {
-	u64 *pte = fetch_pte(dom, bus_addr);
+	u64 *pte = fetch_pte(dom, bus_addr, map_size);
 
 	if (pte)
 		*pte = 0;
@@ -668,7 +668,7 @@ static int init_unity_mappings_for_device(struct dma_ops_domain *dma_dom,
  * there is one, it returns the pointer to it.
  */
 static u64 *fetch_pte(struct protection_domain *domain,
-		      unsigned long address)
+		      unsigned long address, int map_size)
 {
 	int level;
 	u64 *pte;
@@ -676,7 +676,7 @@ static u64 *fetch_pte(struct protection_domain *domain,
 	level =  domain->mode - 1;
 	pte   = &domain->pt_root[PM_LEVEL_INDEX(level, address)];
 
-	while (level > 0) {
+	while (level > map_size) {
 		if (!IOMMU_PTE_PRESENT(*pte))
 			return NULL;
 
@@ -684,6 +684,11 @@ static u64 *fetch_pte(struct protection_domain *domain,
 
 		pte = IOMMU_PTE_PAGE(*pte);
 		pte = &pte[PM_LEVEL_INDEX(level, address)];
+
+		if ((PM_PTE_LEVEL(*pte) == 0) && level != map_size) {
+			pte = NULL;
+			break;
+		}
 	}
 
 	return pte;
@@ -757,7 +762,7 @@ static int alloc_new_range(struct amd_iommu *iommu,
 	for (i = dma_dom->aperture[index]->offset;
 	     i < dma_dom->aperture_size;
 	     i += PAGE_SIZE) {
-		u64 *pte = fetch_pte(&dma_dom->domain, i);
+		u64 *pte = fetch_pte(&dma_dom->domain, i, PM_MAP_4k);
 		if (!pte || !IOMMU_PTE_PRESENT(*pte))
 			continue;
 
@@ -2192,7 +2197,7 @@ static void amd_iommu_unmap_range(struct iommu_domain *dom,
 	iova  &= PAGE_MASK;
 
 	for (i = 0; i < npages; ++i) {
-		iommu_unmap_page(domain, iova);
+		iommu_unmap_page(domain, iova, PM_MAP_4k);
 		iova  += PAGE_SIZE;
 	}
 
@@ -2207,7 +2212,7 @@ static phys_addr_t amd_iommu_iova_to_phys(struct iommu_domain *dom,
 	phys_addr_t paddr;
 	u64 *pte;
 
-	pte = fetch_pte(domain, iova);
+	pte = fetch_pte(domain, iova, PM_MAP_4k);
 
 	if (!pte || !IOMMU_PTE_PRESENT(*pte))
 		return 0;
-- 
cgit v1.2.3


From abdc5eb3d69279039ba6cb89719913d08013ab14 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Thu, 3 Sep 2009 11:33:51 +0200
Subject: x86/amd-iommu: Change iommu_map_page to support multiple page sizes

This patch adds a map_size parameter to the iommu_map_page
function which makes it generic enough to handle multiple
page sizes. This also requires a change to alloc_pte which
is also done in this patch.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
 arch/x86/include/asm/amd_iommu_types.h |  6 ++++++
 arch/x86/kernel/amd_iommu.c            | 31 ++++++++++++++++++++-----------
 2 files changed, 26 insertions(+), 11 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/amd_iommu_types.h b/arch/x86/include/asm/amd_iommu_types.h
index 351ca39ece0..9e8bb9746dc 100644
--- a/arch/x86/include/asm/amd_iommu_types.h
+++ b/arch/x86/include/asm/amd_iommu_types.h
@@ -160,6 +160,12 @@
 				 IOMMU_PTE_P | IOMMU_PTE_IR | IOMMU_PTE_IW)
 #define PM_PTE_LEVEL(pte)	(((pte) >> 9) & 0x7ULL)
 
+#define PM_MAP_4k		0
+#define PM_ADDR_MASK		0x000ffffffffff000ULL
+#define PM_MAP_MASK(lvl)	(PM_ADDR_MASK & \
+				(~((1ULL << (12 + ((lvl) * 9))) - 1)))
+#define PM_ALIGNED(lvl, addr)	((PM_MAP_MASK(lvl) & (addr)) == (addr))
+
 #define IOMMU_PTE_P  (1ULL << 0)
 #define IOMMU_PTE_TV (1ULL << 1)
 #define IOMMU_PTE_U  (1ULL << 59)
diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index 002cf9cab9e..45be9499c97 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -56,8 +56,8 @@ static int dma_ops_unity_map(struct dma_ops_domain *dma_dom,
 			     struct unity_map_entry *e);
 static struct dma_ops_domain *find_protection_domain(u16 devid);
 static u64 *alloc_pte(struct protection_domain *domain,
-		      unsigned long address, u64
-		      **pte_page, gfp_t gfp);
+		      unsigned long address, int end_lvl,
+		      u64 **pte_page, gfp_t gfp);
 static void dma_ops_reserve_addresses(struct dma_ops_domain *dom,
 				      unsigned long start_page,
 				      unsigned int pages);
@@ -523,17 +523,21 @@ void amd_iommu_flush_all_devices(void)
 static int iommu_map_page(struct protection_domain *dom,
 			  unsigned long bus_addr,
 			  unsigned long phys_addr,
-			  int prot)
+			  int prot,
+			  int map_size)
 {
 	u64 __pte, *pte;
 
 	bus_addr  = PAGE_ALIGN(bus_addr);
 	phys_addr = PAGE_ALIGN(phys_addr);
 
+	BUG_ON(!PM_ALIGNED(map_size, bus_addr));
+	BUG_ON(!PM_ALIGNED(map_size, phys_addr));
+
 	if (!(prot & IOMMU_PROT_MASK))
 		return -EINVAL;
 
-	pte = alloc_pte(dom, bus_addr, NULL, GFP_KERNEL);
+	pte = alloc_pte(dom, bus_addr, map_size, NULL, GFP_KERNEL);
 
 	if (IOMMU_PTE_PRESENT(*pte))
 		return -EBUSY;
@@ -612,7 +616,8 @@ static int dma_ops_unity_map(struct dma_ops_domain *dma_dom,
 
 	for (addr = e->address_start; addr < e->address_end;
 	     addr += PAGE_SIZE) {
-		ret = iommu_map_page(&dma_dom->domain, addr, addr, e->prot);
+		ret = iommu_map_page(&dma_dom->domain, addr, addr, e->prot,
+				     PM_MAP_4k);
 		if (ret)
 			return ret;
 		/*
@@ -729,7 +734,7 @@ static int alloc_new_range(struct amd_iommu *iommu,
 		u64 *pte, *pte_page;
 
 		for (i = 0; i < num_ptes; ++i) {
-			pte = alloc_pte(&dma_dom->domain, address,
+			pte = alloc_pte(&dma_dom->domain, address, PM_MAP_4k,
 					&pte_page, gfp);
 			if (!pte)
 				goto out_free;
@@ -1356,7 +1361,10 @@ static bool increase_address_space(struct protection_domain *domain,
 }
 
 static u64 *alloc_pte(struct protection_domain *domain,
-		      unsigned long address, u64 **pte_page, gfp_t gfp)
+		      unsigned long address,
+		      int end_lvl,
+		      u64 **pte_page,
+		      gfp_t gfp)
 {
 	u64 *pte, *page;
 	int level;
@@ -1367,7 +1375,7 @@ static u64 *alloc_pte(struct protection_domain *domain,
 	level =  domain->mode - 1;
 	pte   = &domain->pt_root[PM_LEVEL_INDEX(level, address)];
 
-	while (level > 0) {
+	while (level > end_lvl) {
 		if (!IOMMU_PTE_PRESENT(*pte)) {
 			page = (u64 *)get_zeroed_page(gfp);
 			if (!page)
@@ -1379,7 +1387,7 @@ static u64 *alloc_pte(struct protection_domain *domain,
 
 		pte = IOMMU_PTE_PAGE(*pte);
 
-		if (pte_page && level == 0)
+		if (pte_page && level == end_lvl)
 			*pte_page = pte;
 
 		pte = &pte[PM_LEVEL_INDEX(level, address)];
@@ -1403,7 +1411,8 @@ static u64* dma_ops_get_pte(struct dma_ops_domain *dom,
 
 	pte = aperture->pte_pages[APERTURE_PAGE_INDEX(address)];
 	if (!pte) {
-		pte = alloc_pte(&dom->domain, address, &pte_page, GFP_ATOMIC);
+		pte = alloc_pte(&dom->domain, address, PM_MAP_4k, &pte_page,
+				GFP_ATOMIC);
 		aperture->pte_pages[APERTURE_PAGE_INDEX(address)] = pte_page;
 	} else
 		pte += PM_LEVEL_INDEX(0, address);
@@ -2176,7 +2185,7 @@ static int amd_iommu_map_range(struct iommu_domain *dom,
 	paddr &= PAGE_MASK;
 
 	for (i = 0; i < npages; ++i) {
-		ret = iommu_map_page(domain, iova, paddr, prot);
+		ret = iommu_map_page(domain, iova, paddr, prot, PM_MAP_4k);
 		if (ret)
 			return ret;
 
-- 
cgit v1.2.3


From ac0101d396fee24994632f71b55b9f7f9ee16eff Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Tue, 1 Sep 2009 16:00:35 +0200
Subject: x86/dma: Mark iommu_pass_through as __read_mostly

This variable is read most of the time. This patch marks it
as such. It also documents the meaning the this variable
while at it.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
 arch/x86/kernel/pci-dma.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c
index 1a041bcf506..873aa079d16 100644
--- a/arch/x86/kernel/pci-dma.c
+++ b/arch/x86/kernel/pci-dma.c
@@ -32,7 +32,14 @@ int no_iommu __read_mostly;
 /* Set this to 1 if there is a HW IOMMU in the system */
 int iommu_detected __read_mostly = 0;
 
-int iommu_pass_through;
+/*
+ * This variable becomes 1 if iommu=pt is passed on the kernel command line.
+ * If this variable is 1, IOMMU implementations do no DMA ranslation for
+ * devices and allow every device to access to whole physical memory. This is
+ * useful if a user want to use an IOMMU only for KVM device assignment to
+ * guests and not for driver dma translation.
+ */
+int iommu_pass_through __read_mostly;
 
 dma_addr_t bad_dma_address __read_mostly = 0;
 EXPORT_SYMBOL(bad_dma_address);
-- 
cgit v1.2.3


From 2650815fb03fe2bf1e6701584087ba669dcf92cd Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Wed, 26 Aug 2009 16:52:40 +0200
Subject: x86/amd-iommu: Add core functions for pd allocation/freeing

This patch factors some code of protection domain allocation
into seperate functions. This way the logic can be used to
allocate the passthrough domain later. As a side effect this
patch fixes an unlikely domain id leakage bug.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
 arch/x86/kernel/amd_iommu.c | 36 ++++++++++++++++++++++++++++++++----
 1 file changed, 32 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index 6c99f503780..0934348abfa 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -1988,19 +1988,47 @@ static void cleanup_domain(struct protection_domain *domain)
 	write_unlock_irqrestore(&amd_iommu_devtable_lock, flags);
 }
 
-static int amd_iommu_domain_init(struct iommu_domain *dom)
+static void protection_domain_free(struct protection_domain *domain)
+{
+	if (!domain)
+		return;
+
+	if (domain->id)
+		domain_id_free(domain->id);
+
+	kfree(domain);
+}
+
+static struct protection_domain *protection_domain_alloc(void)
 {
 	struct protection_domain *domain;
 
 	domain = kzalloc(sizeof(*domain), GFP_KERNEL);
 	if (!domain)
-		return -ENOMEM;
+		return NULL;
 
 	spin_lock_init(&domain->lock);
-	domain->mode = PAGE_MODE_3_LEVEL;
 	domain->id = domain_id_alloc();
 	if (!domain->id)
+		goto out_err;
+
+	return domain;
+
+out_err:
+	kfree(domain);
+
+	return NULL;
+}
+
+static int amd_iommu_domain_init(struct iommu_domain *dom)
+{
+	struct protection_domain *domain;
+
+	domain = protection_domain_alloc();
+	if (!domain)
 		goto out_free;
+
+	domain->mode    = PAGE_MODE_3_LEVEL;
 	domain->pt_root = (void *)get_zeroed_page(GFP_KERNEL);
 	if (!domain->pt_root)
 		goto out_free;
@@ -2010,7 +2038,7 @@ static int amd_iommu_domain_init(struct iommu_domain *dom)
 	return 0;
 
 out_free:
-	kfree(domain);
+	protection_domain_free(domain);
 
 	return -ENOMEM;
 }
-- 
cgit v1.2.3


From 0feae533ddebe02cda6ccce5cac7349b446776a8 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Wed, 26 Aug 2009 15:26:30 +0200
Subject: x86/amd-iommu: Add passthrough mode initialization functions

When iommu=pt is passed on kernel command line the devices
should run untranslated. This requires the allocation of a
special domain for that purpose. This patch implements the
allocation and initialization path for iommu=pt.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
 arch/x86/include/asm/amd_iommu.h       |  1 +
 arch/x86/include/asm/amd_iommu_types.h |  4 ++
 arch/x86/kernel/amd_iommu.c            | 72 ++++++++++++++++++++++++++++++----
 3 files changed, 69 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/amd_iommu.h b/arch/x86/include/asm/amd_iommu.h
index bdf96f119f0..ac95995b7ba 100644
--- a/arch/x86/include/asm/amd_iommu.h
+++ b/arch/x86/include/asm/amd_iommu.h
@@ -25,6 +25,7 @@
 #ifdef CONFIG_AMD_IOMMU
 extern int amd_iommu_init(void);
 extern int amd_iommu_init_dma_ops(void);
+extern int amd_iommu_init_passthrough(void);
 extern void amd_iommu_detect(void);
 extern irqreturn_t amd_iommu_int_handler(int irq, void *data);
 extern void amd_iommu_flush_all_domains(void);
diff --git a/arch/x86/include/asm/amd_iommu_types.h b/arch/x86/include/asm/amd_iommu_types.h
index 0c878caaa0a..49f7453bff7 100644
--- a/arch/x86/include/asm/amd_iommu_types.h
+++ b/arch/x86/include/asm/amd_iommu_types.h
@@ -143,6 +143,7 @@
 #define EVT_BUFFER_SIZE		8192 /* 512 entries */
 #define EVT_LEN_MASK		(0x9ULL << 56)
 
+#define PAGE_MODE_NONE    0x00
 #define PAGE_MODE_1_LEVEL 0x01
 #define PAGE_MODE_2_LEVEL 0x02
 #define PAGE_MODE_3_LEVEL 0x03
@@ -194,6 +195,9 @@
 #define PD_DMA_OPS_MASK		(1UL << 0) /* domain used for dma_ops */
 #define PD_DEFAULT_MASK		(1UL << 1) /* domain is a default dma_ops
 					      domain for an IOMMU */
+#define PD_PASSTHROUGH_MASK	(1UL << 2) /* domain has no page
+					      translation */
+
 extern bool amd_iommu_dump;
 #define DUMP_printk(format, arg...)					\
 	do {								\
diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index 0934348abfa..7987f20499a 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -41,6 +41,12 @@ static DEFINE_RWLOCK(amd_iommu_devtable_lock);
 static LIST_HEAD(iommu_pd_list);
 static DEFINE_SPINLOCK(iommu_pd_list_lock);
 
+/*
+ * Domain for untranslated devices - only allocated
+ * if iommu=pt passed on kernel cmd line.
+ */
+static struct protection_domain *pt_domain;
+
 #ifdef CONFIG_IOMMU_API
 static struct iommu_ops amd_iommu_ops;
 #endif
@@ -1067,9 +1073,9 @@ static struct protection_domain *domain_for_device(u16 devid)
  * If a device is not yet associated with a domain, this function does
  * assigns it visible for the hardware
  */
-static void attach_device(struct amd_iommu *iommu,
-			  struct protection_domain *domain,
-			  u16 devid)
+static void __attach_device(struct amd_iommu *iommu,
+			    struct protection_domain *domain,
+			    u16 devid)
 {
 	unsigned long flags;
 	u64 pte_root = virt_to_phys(domain->pt_root);
@@ -1087,12 +1093,19 @@ static void attach_device(struct amd_iommu *iommu,
 
 	amd_iommu_pd_table[devid] = domain;
 	write_unlock_irqrestore(&amd_iommu_devtable_lock, flags);
+}
 
-       /*
-        * We might boot into a crash-kernel here. The crashed kernel
-        * left the caches in the IOMMU dirty. So we have to flush
-        * here to evict all dirty stuff.
-        */
+static void attach_device(struct amd_iommu *iommu,
+			  struct protection_domain *domain,
+			  u16 devid)
+{
+	__attach_device(iommu, domain, devid);
+
+	/*
+	 * We might boot into a crash-kernel here. The crashed kernel
+	 * left the caches in the IOMMU dirty. So we have to flush
+	 * here to evict all dirty stuff.
+	 */
 	iommu_queue_inv_dev_entry(iommu, devid);
 	iommu_flush_tlb_pde(iommu, domain->id);
 }
@@ -2219,3 +2232,46 @@ static struct iommu_ops amd_iommu_ops = {
 	.domain_has_cap = amd_iommu_domain_has_cap,
 };
 
+/*****************************************************************************
+ *
+ * The next functions do a basic initialization of IOMMU for pass through
+ * mode
+ *
+ * In passthrough mode the IOMMU is initialized and enabled but not used for
+ * DMA-API translation.
+ *
+ *****************************************************************************/
+
+int __init amd_iommu_init_passthrough(void)
+{
+	struct pci_dev *dev = NULL;
+	u16 devid, devid2;
+
+	/* allocate passthroug domain */
+	pt_domain = protection_domain_alloc();
+	if (!pt_domain)
+		return -ENOMEM;
+
+	pt_domain->mode |= PAGE_MODE_NONE;
+
+	while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
+		struct amd_iommu *iommu;
+
+		devid = calc_devid(dev->bus->number, dev->devfn);
+		if (devid > amd_iommu_last_bdf)
+			continue;
+
+		devid2 = amd_iommu_alias_table[devid];
+
+		iommu = amd_iommu_rlookup_table[devid2];
+		if (!iommu)
+			continue;
+
+		__attach_device(iommu, pt_domain, devid);
+		__attach_device(iommu, pt_domain, devid2);
+	}
+
+	pr_info("AMD-Vi: Initialized for Passthrough Mode\n");
+
+	return 0;
+}
-- 
cgit v1.2.3


From aa879fff5d12318259816aa35023e941a1e4d3d9 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Mon, 31 Aug 2009 16:01:48 +0200
Subject: x86/amd-iommu: Fix device table write order

The V bit of the device table entry has to be set after the
rest of the entry is written to not confuse the hardware.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
 arch/x86/kernel/amd_iommu.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index 7987f20499a..2b1e77c714f 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -1087,9 +1087,9 @@ static void __attach_device(struct amd_iommu *iommu,
 	pte_root |= IOMMU_PTE_IR | IOMMU_PTE_IW | IOMMU_PTE_P | IOMMU_PTE_TV;
 
 	write_lock_irqsave(&amd_iommu_devtable_lock, flags);
-	amd_iommu_dev_table[devid].data[0] = lower_32_bits(pte_root);
-	amd_iommu_dev_table[devid].data[1] = upper_32_bits(pte_root);
 	amd_iommu_dev_table[devid].data[2] = domain->id;
+	amd_iommu_dev_table[devid].data[1] = upper_32_bits(pte_root);
+	amd_iommu_dev_table[devid].data[0] = lower_32_bits(pte_root);
 
 	amd_iommu_pd_table[devid] = domain;
 	write_unlock_irqrestore(&amd_iommu_devtable_lock, flags);
-- 
cgit v1.2.3


From eba6ac60ba66c6bf6858938442204feaa67dea31 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Tue, 1 Sep 2009 12:07:08 +0200
Subject: x86/amd-iommu: Align locking between attach_device and detach_device

This patch makes the locking behavior between the functions
attach_device and __attach_device consistent with the
locking behavior between detach_device and __detach_device.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
 arch/x86/kernel/amd_iommu.c | 19 ++++++++++++++-----
 1 file changed, 14 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index 2b1e77c714f..9aa135d4453 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -1077,29 +1077,38 @@ static void __attach_device(struct amd_iommu *iommu,
 			    struct protection_domain *domain,
 			    u16 devid)
 {
-	unsigned long flags;
-	u64 pte_root = virt_to_phys(domain->pt_root);
+	u64 pte_root;
 
-	domain->dev_cnt += 1;
+	/* lock domain */
+	spin_lock(&domain->lock);
+
+	pte_root = virt_to_phys(domain->pt_root);
 
 	pte_root |= (domain->mode & DEV_ENTRY_MODE_MASK)
 		    << DEV_ENTRY_MODE_SHIFT;
 	pte_root |= IOMMU_PTE_IR | IOMMU_PTE_IW | IOMMU_PTE_P | IOMMU_PTE_TV;
 
-	write_lock_irqsave(&amd_iommu_devtable_lock, flags);
 	amd_iommu_dev_table[devid].data[2] = domain->id;
 	amd_iommu_dev_table[devid].data[1] = upper_32_bits(pte_root);
 	amd_iommu_dev_table[devid].data[0] = lower_32_bits(pte_root);
 
 	amd_iommu_pd_table[devid] = domain;
-	write_unlock_irqrestore(&amd_iommu_devtable_lock, flags);
+
+	domain->dev_cnt += 1;
+
+	/* ready */
+	spin_unlock(&domain->lock);
 }
 
 static void attach_device(struct amd_iommu *iommu,
 			  struct protection_domain *domain,
 			  u16 devid)
 {
+	unsigned long flags;
+
+	write_lock_irqsave(&amd_iommu_devtable_lock, flags);
 	__attach_device(iommu, domain, devid);
+	write_unlock_irqrestore(&amd_iommu_devtable_lock, flags);
 
 	/*
 	 * We might boot into a crash-kernel here. The crashed kernel
-- 
cgit v1.2.3


From 21129f786f231f7a9dce5b504617b893f50a435f Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Tue, 1 Sep 2009 11:59:42 +0200
Subject: x86/amd-iommu: Make sure a device is assigned in passthrough mode

When the IOMMU driver runs in passthrough mode it has to
make sure that every device not assigned to an IOMMU-API
domain must be put into the passthrough domain instead of
keeping it unassigned.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
 arch/x86/kernel/amd_iommu.c | 9 +++++++++
 1 file changed, 9 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index 9aa135d4453..a8e74c34dd2 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -1141,6 +1141,15 @@ static void __detach_device(struct protection_domain *domain, u16 devid)
 
 	/* ready */
 	spin_unlock(&domain->lock);
+
+	/*
+	 * If we run in passthrough mode the device must be assigned to the
+	 * passthrough domain if it is detached from any other domain
+	 */
+	if (iommu_pass_through) {
+		struct amd_iommu *iommu = amd_iommu_rlookup_table[devid];
+		__attach_device(iommu, pt_domain, devid);
+	}
 }
 
 /*
-- 
cgit v1.2.3


From a1ca331c8aa75cd58fdf685e2e8745e1d3ec5c8f Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Tue, 1 Sep 2009 12:22:22 +0200
Subject: x86/amd-iommu: Don't detach device from pt domain on driver unbind

This patch makes sure a device is not detached from the
passthrough domain when the device driver is unloaded or
does otherwise release the device.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
 arch/x86/kernel/amd_iommu.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index a8e74c34dd2..12a541deae5 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -1195,6 +1195,8 @@ static int device_change_notifier(struct notifier_block *nb,
 	case BUS_NOTIFY_UNBOUND_DRIVER:
 		if (!domain)
 			goto out;
+		if (iommu_pass_through)
+			break;
 		detach_device(domain, devid);
 		break;
 	case BUS_NOTIFY_ADD_DEVICE:
-- 
cgit v1.2.3


From 4751a95134e05f1172131d2001c6991d671fa58c Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Tue, 1 Sep 2009 15:53:54 +0200
Subject: x86/amd-iommu: Initialize passthrough mode when requested

This patch enables the passthrough mode for AMD IOMMU by
running the initialization function when iommu=pt is passed
on the kernel command line.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
 arch/x86/kernel/amd_iommu_init.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c
index c1b17e97252..f00f489ab15 100644
--- a/arch/x86/kernel/amd_iommu_init.c
+++ b/arch/x86/kernel/amd_iommu_init.c
@@ -1242,12 +1242,18 @@ int __init amd_iommu_init(void)
 	if (ret)
 		goto free;
 
-	ret = amd_iommu_init_dma_ops();
+	if (iommu_pass_through)
+		ret = amd_iommu_init_passthrough();
+	else
+		ret = amd_iommu_init_dma_ops();
 	if (ret)
 		goto free;
 
 	enable_iommus();
 
+	if (iommu_pass_through)
+		goto out;
+
 	printk(KERN_INFO "AMD IOMMU: device isolation ");
 	if (amd_iommu_isolate)
 		printk("enabled\n");
-- 
cgit v1.2.3


From 6ac162d6c01ac7626f46c68c0770556cf682ce34 Mon Sep 17 00:00:00 2001
From: Pavel Vasilyev <pavel@pavlinux.ru>
Date: Thu, 3 Sep 2009 16:20:55 +0200
Subject: x86/gart: Do not select AGP for GART_IOMMU

There is no dependency from the gart code to the agp code.
And since a lot of systems today do not have agp anymore
remove this dependency from the kernel configuration.

Signed-off-by: Pavel Vasilyev <pavel@pavlinux.ru>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
 arch/x86/Kconfig | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 13ffa5df37d..1d9c18aa17e 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -586,7 +586,6 @@ config GART_IOMMU
 	bool "GART IOMMU support" if EMBEDDED
 	default y
 	select SWIOTLB
-	select AGP
 	depends on X86_64 && PCI
 	---help---
 	  Support for full DMA access of devices with 32bit memory access only
-- 
cgit v1.2.3


From 8adf65cfae2d6c2ec5c06e4521f089c62f9eff05 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Thu, 3 Sep 2009 21:26:34 +0200
Subject: x86, msr: Fix msr-reg.S compilation with gas 2.16.1, on 32-bit too

The macro was defined in the 32-bit path as well - breaking the
build on 32-bit platforms:

  arch/x86/lib/msr-reg.S: Assembler messages:
  arch/x86/lib/msr-reg.S:53: Error: Bad macro parameter list
  arch/x86/lib/msr-reg.S:100: Error: invalid character '_' in mnemonic
  arch/x86/lib/msr-reg.S:101: Error: invalid character '_' in mnemonic

Cc: Borislav Petkov <petkovbb@googlemail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
LKML-Reference: <tip-f6909f394c2d4a0a71320797df72d54c49c5927e@git.kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/lib/msr-reg.S | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/lib/msr-reg.S b/arch/x86/lib/msr-reg.S
index d5eaf53aa67..69fa10623f2 100644
--- a/arch/x86/lib/msr-reg.S
+++ b/arch/x86/lib/msr-reg.S
@@ -50,7 +50,7 @@ ENDPROC(native_\op\()_safe_regs)
 
 #else /* X86_32 */
 
-.macro op_safe_regs op:req
+.macro op_safe_regs op
 ENTRY(native_\op\()_safe_regs)
 	CFI_STARTPROC
 	pushl_cfi %ebx
-- 
cgit v1.2.3


From 1ea0d14e480c245683927eecc03a70faf06e80c8 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Thu, 3 Sep 2009 12:27:15 -0700
Subject: x86/i386: Make sure stack-protector segment base is cache aligned

The Intel Optimization Reference Guide says:

	In Intel Atom microarchitecture, the address generation unit
	assumes that the segment base will be 0 by default. Non-zero
	segment base will cause load and store operations to experience
	a delay.
		- If the segment base isn't aligned to a cache line
		  boundary, the max throughput of memory operations is
		  reduced to one [e]very 9 cycles.
	[...]
	Assembly/Compiler Coding Rule 15. (H impact, ML generality)
	For Intel Atom processors, use segments with base set to 0
	whenever possible; avoid non-zero segment base address that is
	not aligned to cache line boundary at all cost.

We can't avoid having a non-zero base for the stack-protector
segment, but we can make it cache-aligned.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: <stable@kernel.org>
LKML-Reference: <4AA01893.6000507@goop.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/processor.h      | 12 +++++++++++-
 arch/x86/include/asm/stackprotector.h |  4 ++--
 arch/x86/include/asm/system.h         |  2 +-
 arch/x86/kernel/cpu/common.c          |  2 +-
 arch/x86/kernel/head_32.S             |  1 -
 5 files changed, 15 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index c7768269b1c..e597ecc8753 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -403,7 +403,17 @@ extern unsigned long kernel_eflags;
 extern asmlinkage void ignore_sysret(void);
 #else	/* X86_64 */
 #ifdef CONFIG_CC_STACKPROTECTOR
-DECLARE_PER_CPU(unsigned long, stack_canary);
+/*
+ * Make sure stack canary segment base is cached-aligned:
+ *   "For Intel Atom processors, avoid non zero segment base address
+ *    that is not aligned to cache line boundary at all cost."
+ * (Optim Ref Manual Assembly/Compiler Coding Rule 15.)
+ */
+struct stack_canary {
+	char __pad[20];		/* canary at %gs:20 */
+	unsigned long canary;
+};
+DECLARE_PER_CPU(struct stack_canary, stack_canary) ____cacheline_aligned;
 #endif
 #endif	/* X86_64 */
 
diff --git a/arch/x86/include/asm/stackprotector.h b/arch/x86/include/asm/stackprotector.h
index 44efdff3975..15751776356 100644
--- a/arch/x86/include/asm/stackprotector.h
+++ b/arch/x86/include/asm/stackprotector.h
@@ -78,14 +78,14 @@ static __always_inline void boot_init_stack_canary(void)
 #ifdef CONFIG_X86_64
 	percpu_write(irq_stack_union.stack_canary, canary);
 #else
-	percpu_write(stack_canary, canary);
+	percpu_write(stack_canary.canary, canary);
 #endif
 }
 
 static inline void setup_stack_canary_segment(int cpu)
 {
 #ifdef CONFIG_X86_32
-	unsigned long canary = (unsigned long)&per_cpu(stack_canary, cpu) - 20;
+	unsigned long canary = (unsigned long)&per_cpu(stack_canary, cpu);
 	struct desc_struct *gdt_table = get_cpu_gdt_table(cpu);
 	struct desc_struct desc;
 
diff --git a/arch/x86/include/asm/system.h b/arch/x86/include/asm/system.h
index 75c49c782e2..f08f9737489 100644
--- a/arch/x86/include/asm/system.h
+++ b/arch/x86/include/asm/system.h
@@ -31,7 +31,7 @@ void __switch_to_xtra(struct task_struct *prev_p, struct task_struct *next_p,
 	"movl %P[task_canary](%[next]), %%ebx\n\t"			\
 	"movl %%ebx, "__percpu_arg([stack_canary])"\n\t"
 #define __switch_canary_oparam						\
-	, [stack_canary] "=m" (per_cpu_var(stack_canary))
+	, [stack_canary] "=m" (per_cpu_var(stack_canary.canary))
 #define __switch_canary_iparam						\
 	, [task_canary] "i" (offsetof(struct task_struct, stack_canary))
 #else	/* CC_STACKPROTECTOR */
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index ced07ba5e93..7d84bc4c118 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -1043,7 +1043,7 @@ DEFINE_PER_CPU(struct orig_ist, orig_ist);
 #else	/* CONFIG_X86_64 */
 
 #ifdef CONFIG_CC_STACKPROTECTOR
-DEFINE_PER_CPU(unsigned long, stack_canary);
+DEFINE_PER_CPU(struct stack_canary, stack_canary) ____cacheline_aligned;
 #endif
 
 /* Make sure %fs and %gs are initialized properly in idle threads */
diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
index cc827ac9e8d..7ffec6b3b33 100644
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -439,7 +439,6 @@ is386:	movl $2,%ecx		# set MP
 	jne 1f
 	movl $per_cpu__gdt_page,%eax
 	movl $per_cpu__stack_canary,%ecx
-	subl $20, %ecx
 	movw %cx, 8 * GDT_ENTRY_STACK_CANARY + 2(%eax)
 	shrl $16, %ecx
 	movb %cl, 8 * GDT_ENTRY_STACK_CANARY + 4(%eax)
-- 
cgit v1.2.3


From 4a376ec3a2599c02207cd4cbd5dbf73783548463 Mon Sep 17 00:00:00 2001
From: Andreas Herrmann <andreas.herrmann3@amd.com>
Date: Thu, 3 Sep 2009 09:40:21 +0200
Subject: x86: Fix CPU llc_shared_map information for AMD Magny-Cours

Construct entire NodeID and use it as cpu_llc_id. Thus internal node
siblings are stored in llc_shared_map.

Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/include/asm/cpufeature.h |  1 +
 arch/x86/kernel/cpu/amd.c         | 64 ++++++++++++++++++++++++++++++++++++++-
 2 files changed, 64 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h
index 4a28d22d479..847fee6493a 100644
--- a/arch/x86/include/asm/cpufeature.h
+++ b/arch/x86/include/asm/cpufeature.h
@@ -95,6 +95,7 @@
 #define X86_FEATURE_NONSTOP_TSC	(3*32+24) /* TSC does not stop in C states */
 #define X86_FEATURE_CLFLUSH_MONITOR (3*32+25) /* "" clflush reqd with monitor */
 #define X86_FEATURE_EXTD_APICID	(3*32+26) /* has extended APICID (8 bits) */
+#define X86_FEATURE_AMD_DCM     (3*32+27) /* multi-node processor */
 
 /* Intel-defined CPU features, CPUID level 0x00000001 (ecx), word 4 */
 #define X86_FEATURE_XMM3	(4*32+ 0) /* "pni" SSE-3 */
diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index 0a717fc6aeb..a76d2c18f15 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -250,6 +250,64 @@ static int __cpuinit nearby_node(int apicid)
 }
 #endif
 
+/*
+ * Fixup core topology information for AMD multi-node processors.
+ * Assumption 1: Number of cores in each internal node is the same.
+ * Assumption 2: Mixed systems with both single-node and dual-node
+ *               processors are not supported.
+ */
+#ifdef CONFIG_X86_HT
+static void __cpuinit amd_fixup_dcm(struct cpuinfo_x86 *c)
+{
+#ifdef CONFIG_PCI
+	u32 t, cpn;
+	u8 n, n_id;
+	int cpu = smp_processor_id();
+
+	/* fixup topology information only once for a core */
+	if (cpu_has(c, X86_FEATURE_AMD_DCM))
+		return;
+
+	/* check for multi-node processor on boot cpu */
+	t = read_pci_config(0, 24, 3, 0xe8);
+	if (!(t & (1 << 29)))
+		return;
+
+	set_cpu_cap(c, X86_FEATURE_AMD_DCM);
+
+	/* cores per node: each internal node has half the number of cores */
+	cpn = c->x86_max_cores >> 1;
+
+	/* even-numbered NB_id of this dual-node processor */
+	n = c->phys_proc_id << 1;
+
+	/*
+	 * determine internal node id and assign cores fifty-fifty to
+	 * each node of the dual-node processor
+	 */
+	t = read_pci_config(0, 24 + n, 3, 0xe8);
+	n = (t>>30) & 0x3;
+	if (n == 0) {
+		if (c->cpu_core_id < cpn)
+			n_id = 0;
+		else
+			n_id = 1;
+	} else {
+		if (c->cpu_core_id < cpn)
+			n_id = 1;
+		else
+			n_id = 0;
+	}
+
+	/* compute entire NodeID, use llc_shared_map to store sibling info */
+	per_cpu(cpu_llc_id, cpu) = (c->phys_proc_id << 1) + n_id;
+
+	/* fixup core id to be in range from 0 to cpn */
+	c->cpu_core_id = c->cpu_core_id % cpn;
+#endif
+}
+#endif
+
 /*
  * On a AMD dual core setup the lower bits of the APIC id distingush the cores.
  * Assumes number of cores is a power of two.
@@ -267,6 +325,9 @@ static void __cpuinit amd_detect_cmp(struct cpuinfo_x86 *c)
 	c->phys_proc_id = c->initial_apicid >> bits;
 	/* use socket ID also for last level cache */
 	per_cpu(cpu_llc_id, cpu) = c->phys_proc_id;
+	/* fixup topology information on multi-node processors */
+	if ((c->x86 == 0x10) && (c->x86_model == 9))
+		amd_fixup_dcm(c);
 #endif
 }
 
@@ -277,7 +338,8 @@ static void __cpuinit srat_detect_node(struct cpuinfo_x86 *c)
 	int node;
 	unsigned apicid = cpu_has_apic ? hard_smp_processor_id() : c->apicid;
 
-	node = c->phys_proc_id;
+	node = per_cpu(cpu_llc_id, cpu);
+
 	if (apicid_to_node[apicid] != NUMA_NO_NODE)
 		node = apicid_to_node[apicid];
 	if (!node_online(node)) {
-- 
cgit v1.2.3


From a326e948c538e8ce998f30d92e146ecea8a30421 Mon Sep 17 00:00:00 2001
From: Andreas Herrmann <andreas.herrmann3@amd.com>
Date: Thu, 3 Sep 2009 09:41:19 +0200
Subject: x86, cacheinfo: Fixup L3 cache information for AMD multi-node
 processors

L3 cache size, associativity and shared_cpu information need to be
adapted to show information for an internal node instead of the
entire physical package.

Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/kernel/cpu/intel_cacheinfo.c | 32 ++++++++++++++++++++++----------
 1 file changed, 22 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/intel_cacheinfo.c b/arch/x86/kernel/cpu/intel_cacheinfo.c
index 789efe217e1..cb98a73e516 100644
--- a/arch/x86/kernel/cpu/intel_cacheinfo.c
+++ b/arch/x86/kernel/cpu/intel_cacheinfo.c
@@ -241,7 +241,7 @@ amd_cpuid4(int leaf, union _cpuid4_leaf_eax *eax,
 	case 0:
 		if (!l1->val)
 			return;
-		assoc = l1->assoc;
+		assoc = assocs[l1->assoc];
 		line_size = l1->line_size;
 		lines_per_tag = l1->lines_per_tag;
 		size_in_kb = l1->size_in_kb;
@@ -249,7 +249,7 @@ amd_cpuid4(int leaf, union _cpuid4_leaf_eax *eax,
 	case 2:
 		if (!l2.val)
 			return;
-		assoc = l2.assoc;
+		assoc = assocs[l2.assoc];
 		line_size = l2.line_size;
 		lines_per_tag = l2.lines_per_tag;
 		/* cpu_data has errata corrections for K7 applied */
@@ -258,10 +258,14 @@ amd_cpuid4(int leaf, union _cpuid4_leaf_eax *eax,
 	case 3:
 		if (!l3.val)
 			return;
-		assoc = l3.assoc;
+		assoc = assocs[l3.assoc];
 		line_size = l3.line_size;
 		lines_per_tag = l3.lines_per_tag;
 		size_in_kb = l3.size_encoded * 512;
+		if (boot_cpu_has(X86_FEATURE_AMD_DCM)) {
+			size_in_kb = size_in_kb >> 1;
+			assoc = assoc >> 1;
+		}
 		break;
 	default:
 		return;
@@ -270,18 +274,14 @@ amd_cpuid4(int leaf, union _cpuid4_leaf_eax *eax,
 	eax->split.is_self_initializing = 1;
 	eax->split.type = types[leaf];
 	eax->split.level = levels[leaf];
-	if (leaf == 3)
-		eax->split.num_threads_sharing =
-			current_cpu_data.x86_max_cores - 1;
-	else
-		eax->split.num_threads_sharing = 0;
+	eax->split.num_threads_sharing = 0;
 	eax->split.num_cores_on_die = current_cpu_data.x86_max_cores - 1;
 
 
-	if (assoc == 0xf)
+	if (assoc == 0xffff)
 		eax->split.is_fully_associative = 1;
 	ebx->split.coherency_line_size = line_size - 1;
-	ebx->split.ways_of_associativity = assocs[assoc] - 1;
+	ebx->split.ways_of_associativity = assoc - 1;
 	ebx->split.physical_line_partition = lines_per_tag - 1;
 	ecx->split.number_of_sets = (size_in_kb * 1024) / line_size /
 		(ebx->split.ways_of_associativity + 1) - 1;
@@ -522,6 +522,18 @@ static void __cpuinit cache_shared_cpu_map_setup(unsigned int cpu, int index)
 	int index_msb, i;
 	struct cpuinfo_x86 *c = &cpu_data(cpu);
 
+	if ((index == 3) && (c->x86_vendor == X86_VENDOR_AMD)) {
+		struct cpuinfo_x86 *d;
+		for_each_online_cpu(i) {
+			if (!per_cpu(cpuid4_info, i))
+				continue;
+			d = &cpu_data(i);
+			this_leaf = CPUID4_INFO_IDX(i, index);
+			cpumask_copy(to_cpumask(this_leaf->shared_cpu_map),
+				     d->llc_shared_map);
+		}
+		return;
+	}
 	this_leaf = CPUID4_INFO_IDX(cpu, index);
 	num_threads_sharing = 1 + this_leaf->eax.split.num_threads_sharing;
 
-- 
cgit v1.2.3


From cb9805ab5b97079f69a21b6b4e344a69d5c96157 Mon Sep 17 00:00:00 2001
From: Andreas Herrmann <andreas.herrmann3@amd.com>
Date: Thu, 3 Sep 2009 09:42:20 +0200
Subject: x86, mcheck: Use correct cpumask for shared bank4

This fixes threshold_bank4 support on multi-node processors.

The correct mask to use is llc_shared_map, representing an internal
node on Magny-Cours.

We need to create 2 sets of symlinks for sibling shared banks -- one
set for each internal node, symlinks of each set should target the
first core on same internal node.

Currently only one set is created where all symlinks are targeting
the first core of the entire socket.

Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/kernel/cpu/mcheck/mce_amd.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/mcheck/mce_amd.c b/arch/x86/kernel/cpu/mcheck/mce_amd.c
index ddae21620bd..1fecba404fd 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_amd.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_amd.c
@@ -489,12 +489,14 @@ static __cpuinit int threshold_create_bank(unsigned int cpu, unsigned int bank)
 	int i, err = 0;
 	struct threshold_bank *b = NULL;
 	char name[32];
+	struct cpuinfo_x86 *c = &cpu_data(cpu);
+
 
 	sprintf(name, "threshold_bank%i", bank);
 
 #ifdef CONFIG_SMP
 	if (cpu_data(cpu).cpu_core_id && shared_bank[bank]) {	/* symlink */
-		i = cpumask_first(cpu_core_mask(cpu));
+		i = cpumask_first(c->llc_shared_map);
 
 		/* first core not up yet */
 		if (cpu_data(i).cpu_core_id)
@@ -514,7 +516,7 @@ static __cpuinit int threshold_create_bank(unsigned int cpu, unsigned int bank)
 		if (err)
 			goto out;
 
-		cpumask_copy(b->cpus, cpu_core_mask(cpu));
+		cpumask_copy(b->cpus, c->llc_shared_map);
 		per_cpu(threshold_banks, cpu)[bank] = b;
 
 		goto out;
@@ -539,7 +541,7 @@ static __cpuinit int threshold_create_bank(unsigned int cpu, unsigned int bank)
 #ifndef CONFIG_SMP
 	cpumask_setall(b->cpus);
 #else
-	cpumask_copy(b->cpus, cpu_core_mask(cpu));
+	cpumask_copy(b->cpus, c->llc_shared_map);
 #endif
 
 	per_cpu(threshold_banks, cpu)[bank] = b;
-- 
cgit v1.2.3


From 5a925b4282d7f805deafde62001a83dbaf8be275 Mon Sep 17 00:00:00 2001
From: Andreas Herrmann <andreas.herrmann3@amd.com>
Date: Thu, 3 Sep 2009 09:44:28 +0200
Subject: x86, sched: Workaround broken sched domain creation for AMD
 Magny-Cours

Current sched domain creation code can't handle multi-node processors.
When switching to power_savings scheduling errors show up and
system might hang later on (due to broken sched domain hierarchy):

  # echo 0  >> /sys/devices/system/cpu/sched_mc_power_savings
  CPU0 attaching sched-domain:
   domain 0: span 0-5 level MC
    groups: 0 1 2 3 4 5
    domain 1: span 0-23 level NODE
     groups: 0-5 6-11 18-23 12-17
  ...
  # echo 1  >> /sys/devices/system/cpu/sched_mc_power_savings
  CPU0 attaching sched-domain:
   domain 0: span 0-11 level MC
    groups: 0 1 2 3 4 5 6 7 8 9 10 11
  ERROR: parent span is not a superset of domain->span
    domain 1: span 0-5 level CPU
  ERROR: domain->groups does not contain CPU0
     groups: 6-11 (__cpu_power = 12288)
  ERROR: groups don't span domain->span
     domain 2: span 0-23 level NODE
      groups:
  ERROR: domain->cpu_power not set

  ERROR: groups don't span domain->span
  ...

Fixing all aspects of power-savings scheduling for Magny-Cours needs
some larger changes in the sched domain creation code.

As a short-term and temporary workaround avoid the problems by
extending "the worst possible hack" ;-(
and always use llc_shared_map on AMD Magny-Cours when MC domain span
is calculated.

With this I get:

  # echo 1  >> /sys/devices/system/cpu/sched_mc_power_savings
  CPU0 attaching sched-domain:
   domain 0: span 0-5 level MC
    groups: 0 1 2 3 4 5
    domain 1: span 0-5 level CPU
     groups: 0-5 (__cpu_power = 6144)
     domain 2: span 0-23 level NODE
      groups: 0-5 (__cpu_power = 6144) 6-11 (__cpu_power = 6144) 18-23 (__cpu_power = 6144) 12-17 (__cpu_power = 6144)
  ...

I.e. no errors during sched domain creation, no system hangs, and also
mc_power_savings scheduling works to a certain extend.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/kernel/smpboot.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 2fecda69ee6..c36cc1452cd 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -434,7 +434,8 @@ const struct cpumask *cpu_coregroup_mask(int cpu)
 	 * For perf, we return last level cache shared map.
 	 * And for power savings, we return cpu_core_map
 	 */
-	if (sched_mc_power_savings || sched_smt_power_savings)
+	if ((sched_mc_power_savings || sched_smt_power_savings) &&
+	    !(cpu_has(c, X86_FEATURE_AMD_DCM)))
 		return cpu_core_mask(cpu);
 	else
 		return c->llc_shared_map;
-- 
cgit v1.2.3


From 53f824520b6d84ca5b4a8fd71addc91dbf64357e Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Thu, 3 Sep 2009 14:31:44 -0700
Subject: x86/i386: Put aligned stack-canary in percpu shared_aligned section

Pack aligned things together into a special section to minimize
padding holes.

Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Tejun Heo <tj@kernel.org>
LKML-Reference: <4AA035C0.9070202@goop.org>
[ queued up in tip:x86/asm because it depends on this commit:
  x86/i386: Make sure stack-protector segment base is cache aligned ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/processor.h | 2 +-
 arch/x86/kernel/cpu/common.c     | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index e597ecc8753..ac7e79654f3 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -413,7 +413,7 @@ struct stack_canary {
 	char __pad[20];		/* canary at %gs:20 */
 	unsigned long canary;
 };
-DECLARE_PER_CPU(struct stack_canary, stack_canary) ____cacheline_aligned;
+DECLARE_PER_CPU_ALIGNED(struct stack_canary, stack_canary);
 #endif
 #endif	/* X86_64 */
 
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 7d84bc4c118..f23e236391a 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -1043,7 +1043,7 @@ DEFINE_PER_CPU(struct orig_ist, orig_ist);
 #else	/* CONFIG_X86_64 */
 
 #ifdef CONFIG_CC_STACKPROTECTOR
-DEFINE_PER_CPU(struct stack_canary, stack_canary) ____cacheline_aligned;
+DEFINE_PER_CPU_ALIGNED(struct stack_canary, stack_canary);
 #endif
 
 /* Make sure %fs and %gs are initialized properly in idle threads */
-- 
cgit v1.2.3


From 747b50aaf728987732e6ff3ba10aba4acc4e0277 Mon Sep 17 00:00:00 2001
From: "markus.t.metzger@intel.com" <markus.t.metzger@intel.com>
Date: Wed, 2 Sep 2009 16:04:46 +0200
Subject: x86, perf_counter, bts: Fail if BTS is not available

Reserve PERF_COUNT_HW_BRANCH_INSTRUCTIONS with sample_period ==
1 for BTS tracing and fail, if BTS is not available.

Signed-off-by: Markus Metzger <markus.t.metzger@intel.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20090902140612.943801000@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/perf_counter.c | 25 +++++++++++--------------
 1 file changed, 11 insertions(+), 14 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/perf_counter.c b/arch/x86/kernel/cpu/perf_counter.c
index 396e35db705..2f41874ffb8 100644
--- a/arch/x86/kernel/cpu/perf_counter.c
+++ b/arch/x86/kernel/cpu/perf_counter.c
@@ -769,7 +769,7 @@ static int reserve_bts_hardware(void)
 	int cpu, err = 0;
 
 	if (!bts_available())
-		return -EOPNOTSUPP;
+		return 0;
 
 	get_online_cpus();
 
@@ -914,7 +914,7 @@ static int __hw_perf_counter_init(struct perf_counter *counter)
 			if (!reserve_pmc_hardware())
 				err = -EBUSY;
 			else
-				reserve_bts_hardware();
+				err = reserve_bts_hardware();
 		}
 		if (!err)
 			atomic_inc(&active_counters);
@@ -979,6 +979,13 @@ static int __hw_perf_counter_init(struct perf_counter *counter)
 	if (config == -1LL)
 		return -EINVAL;
 
+	/*
+	 * Branch tracing:
+	 */
+	if ((attr->config == PERF_COUNT_HW_BRANCH_INSTRUCTIONS) &&
+	    (hwc->sample_period == 1) && !bts_available())
+		return -EOPNOTSUPP;
+
 	hwc->config |= config;
 
 	return 0;
@@ -1355,19 +1362,9 @@ static int x86_pmu_enable(struct perf_counter *counter)
 
 	idx = fixed_mode_idx(counter, hwc);
 	if (idx == X86_PMC_IDX_FIXED_BTS) {
-		/*
-		 * Try to use BTS for branch tracing. If that is not
-		 * available, try to get a generic counter.
-		 */
-		if (unlikely(!cpuc->ds))
-			goto try_generic;
-
-		/*
-		 * Try to get the fixed counter, if that is already taken
-		 * then try to get a generic counter:
-		 */
+		/* BTS is already occupied. */
 		if (test_and_set_bit(idx, cpuc->used_mask))
-			goto try_generic;
+			return -EAGAIN;
 
 		hwc->config_base	= 0;
 		hwc->counter_base	= 0;
-- 
cgit v1.2.3


From 596da17f94c103348ebe04129c00d536ea0e80e2 Mon Sep 17 00:00:00 2001
From: "markus.t.metzger@intel.com" <markus.t.metzger@intel.com>
Date: Wed, 2 Sep 2009 16:04:47 +0200
Subject: x86, perf_counter, bts: Correct pointer-to-u64 casts

On 32bit, pointers in the DS AREA configuration are cast to
u64. The current (long) cast to avoid compiler warnings results
in a signed 64bit address.

Signed-off-by: Markus Metzger <markus.t.metzger@intel.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20090902140615.305889000@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/perf_counter.c | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/perf_counter.c b/arch/x86/kernel/cpu/perf_counter.c
index 2f41874ffb8..3776b0b630c 100644
--- a/arch/x86/kernel/cpu/perf_counter.c
+++ b/arch/x86/kernel/cpu/perf_counter.c
@@ -726,7 +726,8 @@ static inline void init_debug_store_on_cpu(int cpu)
 		return;
 
 	wrmsr_on_cpu(cpu, MSR_IA32_DS_AREA,
-		     (u32)((u64)(long)ds), (u32)((u64)(long)ds >> 32));
+		     (u32)((u64)(unsigned long)ds),
+		     (u32)((u64)(unsigned long)ds >> 32));
 }
 
 static inline void fini_debug_store_on_cpu(int cpu)
@@ -757,7 +758,7 @@ static void release_bts_hardware(void)
 
 		per_cpu(cpu_hw_counters, cpu).ds = NULL;
 
-		kfree((void *)(long)ds->bts_buffer_base);
+		kfree((void *)(unsigned long)ds->bts_buffer_base);
 		kfree(ds);
 	}
 
@@ -788,7 +789,7 @@ static int reserve_bts_hardware(void)
 			break;
 		}
 
-		ds->bts_buffer_base = (u64)(long)buffer;
+		ds->bts_buffer_base = (u64)(unsigned long)buffer;
 		ds->bts_index = ds->bts_buffer_base;
 		ds->bts_absolute_maximum =
 			ds->bts_buffer_base + BTS_BUFFER_SIZE;
@@ -1491,7 +1492,7 @@ static void intel_pmu_drain_bts_buffer(struct cpu_hw_counters *cpuc,
 	};
 	struct perf_counter *counter = cpuc->counters[X86_PMC_IDX_FIXED_BTS];
 	unsigned long orig_ip = data->regs->ip;
-	u64 at;
+	struct bts_record *at, *top;
 
 	if (!counter)
 		return;
@@ -1499,19 +1500,18 @@ static void intel_pmu_drain_bts_buffer(struct cpu_hw_counters *cpuc,
 	if (!ds)
 		return;
 
-	for (at = ds->bts_buffer_base;
-	     at < ds->bts_index;
-	     at += sizeof(struct bts_record)) {
-		struct bts_record *rec = (struct bts_record *)(long)at;
+	at  = (struct bts_record *)(unsigned long)ds->bts_buffer_base;
+	top = (struct bts_record *)(unsigned long)ds->bts_index;
 
-		data->regs->ip	= rec->from;
-		data->addr	= rec->to;
+	ds->bts_index = ds->bts_buffer_base;
+
+	for (; at < top; at++) {
+		data->regs->ip	= at->from;
+		data->addr	= at->to;
 
 		perf_counter_output(counter, 1, data);
 	}
 
-	ds->bts_index = ds->bts_buffer_base;
-
 	data->regs->ip	= orig_ip;
 	data->addr	= 0;
 
-- 
cgit v1.2.3


From 1653192f510bd8114b7b133d7289e6e5c3e95046 Mon Sep 17 00:00:00 2001
From: "markus.t.metzger@intel.com" <markus.t.metzger@intel.com>
Date: Wed, 2 Sep 2009 16:04:48 +0200
Subject: x86, perf_counter, bts: Do not allow kernel BTS tracing for now

Kernel BTS tracing generates too much data too fast for us to
handle, causing the kernel to hang.

Fail for BTS requests for kernel code.

Signed-off-by: Markus Metzger <markus.t.metzger@intel.com>
Acked-by: Peter Zijlstra <a.p.zjilstra@chello.nl>
LKML-Reference: <20090902140616.901253000@intel.com>
[ This is really a workaround - but we want BTS tracing in .32
  so make sure we dont regress. The lockup should be fixed
  ASAP. ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/perf_counter.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/perf_counter.c b/arch/x86/kernel/cpu/perf_counter.c
index 3776b0b630c..f9cd0849bd4 100644
--- a/arch/x86/kernel/cpu/perf_counter.c
+++ b/arch/x86/kernel/cpu/perf_counter.c
@@ -984,8 +984,15 @@ static int __hw_perf_counter_init(struct perf_counter *counter)
 	 * Branch tracing:
 	 */
 	if ((attr->config == PERF_COUNT_HW_BRANCH_INSTRUCTIONS) &&
-	    (hwc->sample_period == 1) && !bts_available())
-		return -EOPNOTSUPP;
+	    (hwc->sample_period == 1)) {
+		/* BTS is not supported by this architecture. */
+		if (!bts_available())
+			return -EOPNOTSUPP;
+
+		/* BTS is currently only allowed for user-mode. */
+		if (hwc->config & ARCH_PERFMON_EVENTSEL_OS)
+			return -EOPNOTSUPP;
+	}
 
 	hwc->config |= config;
 
-- 
cgit v1.2.3


From 0d96b9ff748b5f57d6f1d6d21209f5745245aadc Mon Sep 17 00:00:00 2001
From: Yinghai Lu <yinghai@kernel.org>
Date: Sat, 29 Aug 2009 13:17:14 -0700
Subject: x86: Use hard_smp_processor_id() to get apic id for AMD K8 cpus

Otherwise, system with apci id lifting will have wrong apicid in
/proc/cpuinfo.

and use that in srat_detect_node().

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Andreas Herrmann <andreas.herrmann3@amd.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
LKML-Reference: <4A998CCA.1040407@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/amd.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index a76d2c18f15..e1600c775e1 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -336,7 +336,7 @@ static void __cpuinit srat_detect_node(struct cpuinfo_x86 *c)
 #if defined(CONFIG_NUMA) && defined(CONFIG_X86_64)
 	int cpu = smp_processor_id();
 	int node;
-	unsigned apicid = cpu_has_apic ? hard_smp_processor_id() : c->apicid;
+	unsigned apicid = c->apicid;
 
 	node = per_cpu(cpu_llc_id, cpu);
 
@@ -481,6 +481,9 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c)
 	}
 	if (c->x86 == 0x10 || c->x86 == 0x11)
 		set_cpu_cap(c, X86_FEATURE_REP_GOOD);
+
+	/* get apicid instead of initial apic id from cpuid */
+	c->apicid = hard_smp_processor_id();
 #else
 
 	/*
-- 
cgit v1.2.3


From 47734f89be0614b5acbd6a532390f9c72f019648 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Fri, 4 Sep 2009 11:21:24 +0200
Subject: sched: Clean up topology.h

Re-organize the flag settings so that it's visible at a glance
which sched-domains flags are set and which not.

With the new balancer code we'll need to re-tune these details
anyway, so make it cleaner to make fewer mistakes down the
road ;-)

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andreas Herrmann <andreas.herrmann3@amd.com>
Cc: Andreas Herrmann <andreas.herrmann3@amd.com>
Cc: Gautham R Shenoy <ego@in.ibm.com>
Cc: Balbir Singh <balbir@in.ibm.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/topology.h | 47 ++++++++++++++++++++++++-----------------
 1 file changed, 28 insertions(+), 19 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/topology.h b/arch/x86/include/asm/topology.h
index 066ef590d7e..be29eb81fb0 100644
--- a/arch/x86/include/asm/topology.h
+++ b/arch/x86/include/asm/topology.h
@@ -129,25 +129,34 @@ extern unsigned long node_remap_size[];
 #endif
 
 /* sched_domains SD_NODE_INIT for NUMA machines */
-#define SD_NODE_INIT (struct sched_domain) {		\
-	.min_interval		= 8,			\
-	.max_interval		= 32,			\
-	.busy_factor		= 32,			\
-	.imbalance_pct		= 125,			\
-	.cache_nice_tries	= SD_CACHE_NICE_TRIES,	\
-	.busy_idx		= 3,			\
-	.idle_idx		= SD_IDLE_IDX,		\
-	.newidle_idx		= SD_NEWIDLE_IDX,	\
-	.wake_idx		= 1,			\
-	.forkexec_idx		= SD_FORKEXEC_IDX,	\
-	.flags			= SD_LOAD_BALANCE	\
-				| SD_BALANCE_EXEC	\
-				| SD_BALANCE_FORK	\
-				| SD_WAKE_AFFINE	\
-				| SD_WAKE_BALANCE	\
-				| SD_SERIALIZE,		\
-	.last_balance		= jiffies,		\
-	.balance_interval	= 1,			\
+#define SD_NODE_INIT (struct sched_domain) {				\
+	.min_interval		= 8,					\
+	.max_interval		= 32,					\
+	.busy_factor		= 32,					\
+	.imbalance_pct		= 125,					\
+	.cache_nice_tries	= SD_CACHE_NICE_TRIES,			\
+	.busy_idx		= 3,					\
+	.idle_idx		= SD_IDLE_IDX,				\
+	.newidle_idx		= SD_NEWIDLE_IDX,			\
+	.wake_idx		= 1,					\
+	.forkexec_idx		= SD_FORKEXEC_IDX,			\
+									\
+	.flags			= 1*SD_LOAD_BALANCE			\
+				| 0*SD_BALANCE_NEWIDLE			\
+				| 1*SD_BALANCE_EXEC			\
+				| 1*SD_BALANCE_FORK			\
+				| 0*SD_WAKE_IDLE			\
+				| 1*SD_WAKE_AFFINE			\
+				| 1*SD_WAKE_BALANCE			\
+				| 0*SD_SHARE_CPUPOWER			\
+				| 0*SD_POWERSAVINGS_BALANCE		\
+				| 0*SD_SHARE_PKG_RESOURCES		\
+				| 1*SD_SERIALIZE			\
+				| 0*SD_WAKE_IDLE_FAR			\
+				| 0*SD_PREFER_SIBLING			\
+				,					\
+	.last_balance		= jiffies,				\
+	.balance_interval	= 1,					\
 }
 
 #ifdef CONFIG_X86_64_ACPI_NUMA
-- 
cgit v1.2.3


From 840a0653100dbde599ae8ddf83fa214dfa5fd1aa Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Fri, 4 Sep 2009 11:32:54 +0200
Subject: sched: Turn on SD_BALANCE_NEWIDLE

Start the re-tuning of the balancer by turning on newidle.

It improves hackbench performance and parallelism on a 4x4 box.
The "perf stat --repeat 10" measurements give us:

  domain0             domain1
  .......................................
 -SD_BALANCE_NEWIDLE -SD_BALANCE_NEWIDLE:
   2041.273208  task-clock-msecs         #      9.354 CPUs    ( +-   0.363% )

 +SD_BALANCE_NEWIDLE -SD_BALANCE_NEWIDLE:
   2086.326925  task-clock-msecs         #     11.934 CPUs    ( +-   0.301% )

 +SD_BALANCE_NEWIDLE +SD_BALANCE_NEWIDLE:
   2115.289791  task-clock-msecs         #     12.158 CPUs    ( +-   0.263% )

Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andreas Herrmann <andreas.herrmann3@amd.com>
Cc: Andreas Herrmann <andreas.herrmann3@amd.com>
Cc: Gautham R Shenoy <ego@in.ibm.com>
Cc: Balbir Singh <balbir@in.ibm.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/topology.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/topology.h b/arch/x86/include/asm/topology.h
index be29eb81fb0..ef7bc7fc252 100644
--- a/arch/x86/include/asm/topology.h
+++ b/arch/x86/include/asm/topology.h
@@ -142,7 +142,7 @@ extern unsigned long node_remap_size[];
 	.forkexec_idx		= SD_FORKEXEC_IDX,			\
 									\
 	.flags			= 1*SD_LOAD_BALANCE			\
-				| 0*SD_BALANCE_NEWIDLE			\
+				| 1*SD_BALANCE_NEWIDLE			\
 				| 1*SD_BALANCE_EXEC			\
 				| 1*SD_BALANCE_FORK			\
 				| 0*SD_WAKE_IDLE			\
-- 
cgit v1.2.3


From 825c9fb47a0837db12fecf8d360e0e1d284ddb49 Mon Sep 17 00:00:00 2001
From: Jens Axboe <jens.axboe@oracle.com>
Date: Fri, 4 Sep 2009 02:56:22 -0700
Subject: sparc: add basic support for 'perf'

This wires up the perf_counter_open() syscall so that basic
software support for perf is working.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/Kconfig                    | 2 ++
 arch/sparc/include/asm/perf_counter.h | 8 ++++++++
 arch/sparc/include/asm/unistd.h       | 3 ++-
 arch/sparc/kernel/systbls_32.S        | 2 +-
 arch/sparc/kernel/systbls_64.S        | 4 ++--
 5 files changed, 15 insertions(+), 4 deletions(-)
 create mode 100644 arch/sparc/include/asm/perf_counter.h

(limited to 'arch')

diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index b847f880eec..2aa7cd39b48 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -25,6 +25,7 @@ config SPARC
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select RTC_CLASS
 	select RTC_DRV_M48T59
+	select HAVE_PERF_COUNTERS
 
 config SPARC32
 	def_bool !64BIT
@@ -44,6 +45,7 @@ config SPARC64
 	select RTC_DRV_BQ4802
 	select RTC_DRV_SUN4V
 	select RTC_DRV_STARFIRE
+	select HAVE_PERF_COUNTERS
 
 config ARCH_DEFCONFIG
 	string
diff --git a/arch/sparc/include/asm/perf_counter.h b/arch/sparc/include/asm/perf_counter.h
new file mode 100644
index 00000000000..f07c587a830
--- /dev/null
+++ b/arch/sparc/include/asm/perf_counter.h
@@ -0,0 +1,8 @@
+#ifndef __ASM_SPARC_PERF_COUNTER_H
+#define __ASM_SPARC_PERF_COUNTER_H
+
+static inline void set_perf_counter_pending(void) { }
+
+#define	PERF_COUNTER_INDEX_OFFSET	0
+
+#endif
diff --git a/arch/sparc/include/asm/unistd.h b/arch/sparc/include/asm/unistd.h
index b2c406de7d4..706df669f3b 100644
--- a/arch/sparc/include/asm/unistd.h
+++ b/arch/sparc/include/asm/unistd.h
@@ -395,8 +395,9 @@
 #define __NR_preadv		324
 #define __NR_pwritev		325
 #define __NR_rt_tgsigqueueinfo	326
+#define __NR_perf_counter_open	327
 
-#define NR_SYSCALLS		327
+#define NR_SYSCALLS		328
 
 #ifdef __32bit_syscall_numbers__
 /* Sparc 32-bit only has the "setresuid32", "getresuid32" variants,
diff --git a/arch/sparc/kernel/systbls_32.S b/arch/sparc/kernel/systbls_32.S
index 69090165729..04181577cb6 100644
--- a/arch/sparc/kernel/systbls_32.S
+++ b/arch/sparc/kernel/systbls_32.S
@@ -82,5 +82,5 @@ sys_call_table:
 /*310*/	.long sys_utimensat, sys_signalfd, sys_timerfd_create, sys_eventfd, sys_fallocate
 /*315*/	.long sys_timerfd_settime, sys_timerfd_gettime, sys_signalfd4, sys_eventfd2, sys_epoll_create1
 /*320*/	.long sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, sys_preadv
-/*325*/	.long sys_pwritev, sys_rt_tgsigqueueinfo
+/*325*/	.long sys_pwritev, sys_rt_tgsigqueueinfo, sys_perf_counter_open
 
diff --git a/arch/sparc/kernel/systbls_64.S b/arch/sparc/kernel/systbls_64.S
index 2ee7250ba7a..91b06b7f7ac 100644
--- a/arch/sparc/kernel/systbls_64.S
+++ b/arch/sparc/kernel/systbls_64.S
@@ -83,7 +83,7 @@ sys_call_table32:
 /*310*/	.word compat_sys_utimensat, compat_sys_signalfd, sys_timerfd_create, sys_eventfd, compat_sys_fallocate
 	.word compat_sys_timerfd_settime, compat_sys_timerfd_gettime, compat_sys_signalfd4, sys_eventfd2, sys_epoll_create1
 /*320*/	.word sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, compat_sys_preadv
-	.word compat_sys_pwritev, compat_sys_rt_tgsigqueueinfo
+	.word compat_sys_pwritev, compat_sys_rt_tgsigqueueinfo, sys_perf_counter_open
 
 #endif /* CONFIG_COMPAT */
 
@@ -158,4 +158,4 @@ sys_call_table:
 /*310*/	.word sys_utimensat, sys_signalfd, sys_timerfd_create, sys_eventfd, sys_fallocate
 	.word sys_timerfd_settime, sys_timerfd_gettime, sys_signalfd4, sys_eventfd2, sys_epoll_create1
 /*320*/	.word sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, sys_preadv
-	.word sys_pwritev, sys_rt_tgsigqueueinfo
+	.word sys_pwritev, sys_rt_tgsigqueueinfo, sys_perf_counter_open
-- 
cgit v1.2.3


From 8e019366ba749a536131cde1947af6dcaccf8e8f Mon Sep 17 00:00:00 2001
From: Pekka Enberg <penberg@cs.helsinki.fi>
Date: Thu, 27 Aug 2009 14:50:00 +0100
Subject: kmemleak: Don't scan uninitialized memory when kmemcheck is enabled

Ingo Molnar reported the following kmemcheck warning when running both
kmemleak and kmemcheck enabled:

  PM: Adding info for No Bus:vcsa7
  WARNING: kmemcheck: Caught 32-bit read from uninitialized memory
  (f6f6e1a4)
  d873f9f600000000c42ae4c1005c87f70000000070665f666978656400000000
   i i i i u u u u i i i i i i i i i i i i i i i i i i i i i u u u
           ^

  Pid: 3091, comm: kmemleak Not tainted (2.6.31-rc7-tip #1303) P4DC6
  EIP: 0060:[<c110301f>] EFLAGS: 00010006 CPU: 0
  EIP is at scan_block+0x3f/0xe0
  EAX: f40bd700 EBX: f40bd780 ECX: f16b46c0 EDX: 00000001
  ESI: f6f6e1a4 EDI: 00000000 EBP: f10f3f4c ESP: c2605fcc
   DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
  CR0: 8005003b CR2: e89a4844 CR3: 30ff1000 CR4: 000006f0
  DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
  DR6: ffff4ff0 DR7: 00000400
   [<c110313c>] scan_object+0x7c/0xf0
   [<c1103389>] kmemleak_scan+0x1d9/0x400
   [<c1103a3c>] kmemleak_scan_thread+0x4c/0xb0
   [<c10819d4>] kthread+0x74/0x80
   [<c10257db>] kernel_thread_helper+0x7/0x3c
   [<ffffffff>] 0xffffffff
  kmemleak: 515 new suspected memory leaks (see
  /sys/kernel/debug/kmemleak)
  kmemleak: 42 new suspected memory leaks (see /sys/kernel/debug/kmemleak)

The problem here is that kmemleak will scan partially initialized
objects that makes kmemcheck complain. Fix that up by skipping
uninitialized memory regions when kmemcheck is enabled.

Reported-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
---
 arch/x86/mm/kmemcheck/kmemcheck.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/mm/kmemcheck/kmemcheck.c b/arch/x86/mm/kmemcheck/kmemcheck.c
index 2c55ed09865..528bf954eb7 100644
--- a/arch/x86/mm/kmemcheck/kmemcheck.c
+++ b/arch/x86/mm/kmemcheck/kmemcheck.c
@@ -331,6 +331,20 @@ static void kmemcheck_read_strict(struct pt_regs *regs,
 	kmemcheck_shadow_set(shadow, size);
 }
 
+bool kmemcheck_is_obj_initialized(unsigned long addr, size_t size)
+{
+	enum kmemcheck_shadow status;
+	void *shadow;
+
+	shadow = kmemcheck_shadow_lookup(addr);
+	if (!shadow)
+		return true;
+
+	status = kmemcheck_shadow_test(shadow, size);
+
+	return status == KMEMCHECK_SHADOW_INITIALIZED;
+}
+
 /* Access may cross page boundary */
 static void kmemcheck_read(struct pt_regs *regs,
 	unsigned long addr, unsigned int size)
-- 
cgit v1.2.3


From b19ae3999891cad21a3995c34d313dda5df014e2 Mon Sep 17 00:00:00 2001
From: "H. Peter Anvin" <hpa@zytor.com>
Date: Fri, 4 Sep 2009 10:00:09 -0700
Subject: x86, msr: change msr-reg.o to obj-y, and export its symbols

Change msr-reg.o to obj-y (it will be included in virtually every
kernel since it is used by the initialization code for AMD processors)
and add a separate C file to export its symbols to modules, so that
msr.ko can use them; on uniprocessors we bypass the helper functions
in msr.o and use the accessor functions directly via inlines.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
LKML-Reference: <20090904140834.GA15789@elte.hu>
Cc: Borislav Petkov <petkovbb@googlemail.com>
---
 arch/x86/lib/Makefile         | 3 ++-
 arch/x86/lib/msr-reg-export.c | 5 +++++
 2 files changed, 7 insertions(+), 1 deletion(-)
 create mode 100644 arch/x86/lib/msr-reg-export.c

(limited to 'arch')

diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile
index b59c0647d80..9e609206fac 100644
--- a/arch/x86/lib/Makefile
+++ b/arch/x86/lib/Makefile
@@ -8,7 +8,8 @@ lib-y := delay.o
 lib-y += thunk_$(BITS).o
 lib-y += usercopy_$(BITS).o getuser.o putuser.o
 lib-y += memcpy_$(BITS).o
-lib-y += msr-reg.o
+
+obj-y += msr-reg.o msr-reg-export.o
 
 ifeq ($(CONFIG_X86_32),y)
         obj-y += atomic64_32.o
diff --git a/arch/x86/lib/msr-reg-export.c b/arch/x86/lib/msr-reg-export.c
new file mode 100644
index 00000000000..a311cc59b65
--- /dev/null
+++ b/arch/x86/lib/msr-reg-export.c
@@ -0,0 +1,5 @@
+#include <linux/module.h>
+#include <asm/msr.h>
+
+EXPORT_SYMBOL(native_rdmsr_safe_regs);
+EXPORT_SYMBOL(native_wrmsr_safe_regs);
-- 
cgit v1.2.3


From 7929eb9cf643ae416e5081b2a6fa558d37b9854c Mon Sep 17 00:00:00 2001
From: Nicolas Pitre <nico@cam.org>
Date: Thu, 3 Sep 2009 21:45:59 +0100
Subject: ARM: 5691/1: fix cache aliasing issues between kmap() and
 kmap_atomic() with highmem

Let's suppose a highmem page is kmap'd with kmap().  A pkmap entry is
used, the page mapped to it, and the virtual cache is dirtied.  Then
kunmap() is used which does virtually nothing except for decrementing a
usage count.

Then, let's suppose the _same_ page gets mapped using kmap_atomic().
It is therefore mapped onto a fixmap entry instead, which has a
different virtual address unaware of the dirty cache data for that page
sitting in the pkmap mapping.

Fortunately it is easy to know if a pkmap mapping still exists for that
page and use it directly with kmap_atomic(), thanks to kmap_high_get().

And actual testing with a printk in the added code path shows that this
condition is actually met *extremely* frequently.  Seems that we've been
quite lucky that things have worked so well with highmem so far.

Cc: stable@kernel.org
Signed-off-by: Nicolas Pitre <nico@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mm/highmem.c | 8 ++++++++
 1 file changed, 8 insertions(+)

(limited to 'arch')

diff --git a/arch/arm/mm/highmem.c b/arch/arm/mm/highmem.c
index a34954d9df7..73cae57fa70 100644
--- a/arch/arm/mm/highmem.c
+++ b/arch/arm/mm/highmem.c
@@ -40,11 +40,16 @@ void *kmap_atomic(struct page *page, enum km_type type)
 {
 	unsigned int idx;
 	unsigned long vaddr;
+	void *kmap;
 
 	pagefault_disable();
 	if (!PageHighMem(page))
 		return page_address(page);
 
+	kmap = kmap_high_get(page);
+	if (kmap)
+		return kmap;
+
 	idx = type + KM_TYPE_NR * smp_processor_id();
 	vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
 #ifdef CONFIG_DEBUG_HIGHMEM
@@ -80,6 +85,9 @@ void kunmap_atomic(void *kvaddr, enum km_type type)
 #else
 		(void) idx;  /* to kill a warning */
 #endif
+	} else if (vaddr >= PKMAP_ADDR(0) && vaddr < PKMAP_ADDR(LAST_PKMAP)) {
+		/* this address was obtained through kmap_high_get() */
+		kunmap_high(pte_page(pkmap_page_table[PKMAP_NR(vaddr)]));
 	}
 	pagefault_enable();
 }
-- 
cgit v1.2.3


From 81bd5f6c966cf2f137c2759dfc78abdffcff055e Mon Sep 17 00:00:00 2001
From: Jan Glauber <jang@linux.vnet.ibm.com>
Date: Sat, 5 Sep 2009 16:27:35 +1000
Subject: crypto: sha-s390 - Fix warnings in import function

That patch should fix the warnings.

Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
---
 arch/s390/crypto/sha1_s390.c   | 4 ++--
 arch/s390/crypto/sha256_s390.c | 4 ++--
 arch/s390/crypto/sha512_s390.c | 4 ++--
 3 files changed, 6 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/crypto/sha1_s390.c b/arch/s390/crypto/sha1_s390.c
index 4a943789c20..f6de7826c97 100644
--- a/arch/s390/crypto/sha1_s390.c
+++ b/arch/s390/crypto/sha1_s390.c
@@ -57,10 +57,10 @@ static int sha1_export(struct shash_desc *desc, void *out)
 	return 0;
 }
 
-static int sha1_import(struct shash_desc *desc, const u8 *in)
+static int sha1_import(struct shash_desc *desc, const void *in)
 {
 	struct s390_sha_ctx *sctx = shash_desc_ctx(desc);
-	struct sha1_state *ictx = in;
+	const struct sha1_state *ictx = in;
 
 	sctx->count = ictx->count;
 	memcpy(sctx->state, ictx->state, sizeof(ictx->state));
diff --git a/arch/s390/crypto/sha256_s390.c b/arch/s390/crypto/sha256_s390.c
index 2bab5197789..61a7db37212 100644
--- a/arch/s390/crypto/sha256_s390.c
+++ b/arch/s390/crypto/sha256_s390.c
@@ -53,10 +53,10 @@ static int sha256_export(struct shash_desc *desc, void *out)
 	return 0;
 }
 
-static int sha256_import(struct shash_desc *desc, const u8 *in)
+static int sha256_import(struct shash_desc *desc, const void *in)
 {
 	struct s390_sha_ctx *sctx = shash_desc_ctx(desc);
-	struct sha256_state *ictx = in;
+	const struct sha256_state *ictx = in;
 
 	sctx->count = ictx->count;
 	memcpy(sctx->state, ictx->state, sizeof(ictx->state));
diff --git a/arch/s390/crypto/sha512_s390.c b/arch/s390/crypto/sha512_s390.c
index b4b3438ae77..4bf73d0dc52 100644
--- a/arch/s390/crypto/sha512_s390.c
+++ b/arch/s390/crypto/sha512_s390.c
@@ -52,10 +52,10 @@ static int sha512_export(struct shash_desc *desc, void *out)
 	return 0;
 }
 
-static int sha512_import(struct shash_desc *desc, const u8 *in)
+static int sha512_import(struct shash_desc *desc, const void *in)
 {
 	struct s390_sha_ctx *sctx = shash_desc_ctx(desc);
-	struct sha512_state *ictx = in;
+	const struct sha512_state *ictx = in;
 
 	if (unlikely(ictx->count[1]))
 		return -ERANGE;
-- 
cgit v1.2.3


From b592e89ac9af521be164490e45c53c93e89c776f Mon Sep 17 00:00:00 2001
From: Christof Schmitt <christof.schmitt@de.ibm.com>
Date: Tue, 18 Aug 2009 15:43:31 +0200
Subject: [SCSI] zfcp: Remove duplicated code for debug timestamps

The timestamp calculation used for s390dbf output is the same in a
private zfcp function and in debug.c. Replace both with a common
inline function.

Reviewed-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
---
 arch/s390/include/asm/timex.h | 8 ++++++++
 arch/s390/kernel/debug.c      | 8 +-------
 arch/s390/kernel/time.c       | 1 +
 3 files changed, 10 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/include/asm/timex.h b/arch/s390/include/asm/timex.h
index cc21e3e20fd..a07e699bb65 100644
--- a/arch/s390/include/asm/timex.h
+++ b/arch/s390/include/asm/timex.h
@@ -88,6 +88,14 @@ int get_sync_clock(unsigned long long *clock);
 void init_cpu_timer(void);
 unsigned long long monotonic_clock(void);
 
+void tod_to_timeval(__u64, struct timespec *);
+
+static inline
+void stck_to_timespec(unsigned long long stck, struct timespec *ts)
+{
+	tod_to_timeval(stck - TOD_UNIX_EPOCH, ts);
+}
+
 extern u64 sched_clock_base_cc;
 
 #endif
diff --git a/arch/s390/kernel/debug.c b/arch/s390/kernel/debug.c
index be8bceaf37d..4c512561687 100644
--- a/arch/s390/kernel/debug.c
+++ b/arch/s390/kernel/debug.c
@@ -63,8 +63,6 @@ typedef struct
 } debug_sprintf_entry_t;
 
 
-extern void tod_to_timeval(uint64_t todval, struct timespec *xtime);
-
 /* internal function prototyes */
 
 static int debug_init(void);
@@ -1450,17 +1448,13 @@ debug_dflt_header_fn(debug_info_t * id, struct debug_view *view,
 			 int area, debug_entry_t * entry, char *out_buf)
 {
 	struct timespec time_spec;
-	unsigned long long time;
 	char *except_str;
 	unsigned long caller;
 	int rc = 0;
 	unsigned int level;
 
 	level = entry->id.fields.level;
-	time = entry->id.stck;
-	/* adjust todclock to 1970 */
-	time -= 0x8126d60e46000000LL - (0x3c26700LL * 1000000 * 4096);
-	tod_to_timeval(time, &time_spec);
+	stck_to_timespec(entry->id.stck, &time_spec);
 
 	if (entry->id.fields.exception)
 		except_str = "*";
diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c
index d4c8e9c47c8..9693d98d4d4 100644
--- a/arch/s390/kernel/time.c
+++ b/arch/s390/kernel/time.c
@@ -90,6 +90,7 @@ void tod_to_timeval(__u64 todval, struct timespec *xtime)
 	todval -= (sec * 1000000) << 12;
 	xtime->tv_nsec = ((todval * 1000) >> 12);
 }
+EXPORT_SYMBOL(tod_to_timeval);
 
 void clock_comparator_work(void)
 {
-- 
cgit v1.2.3


From 23b6c52cf558f2a1dc6c7010c601b3624eb4591f Mon Sep 17 00:00:00 2001
From: "Rafael J. Wysocki" <rjw@sisk.pl>
Date: Sat, 5 Sep 2009 01:07:45 +0200
Subject: x86: Decrease the level of some NUMA messages to KERN_DEBUG

Some NUMA messages in srat_32.c are confusing to users,
because they seem to indicate errors, while in fact they
reflect normal behaviour.

Decrease the level of these messages to KERN_DEBUG so that
they don't show up unnecessarily.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
LKML-Reference: <200909050107.45175.rjw@sisk.pl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/srat_32.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/mm/srat_32.c b/arch/x86/mm/srat_32.c
index 29a0e37114f..6f8aa33031c 100644
--- a/arch/x86/mm/srat_32.c
+++ b/arch/x86/mm/srat_32.c
@@ -215,7 +215,7 @@ int __init get_memcfg_from_srat(void)
 		goto out_fail;
 
 	if (num_memory_chunks == 0) {
-		printk(KERN_WARNING
+		printk(KERN_DEBUG
 			 "could not find any ACPI SRAT memory areas.\n");
 		goto out_fail;
 	}
@@ -277,7 +277,7 @@ int __init get_memcfg_from_srat(void)
 	}
 	return 1;
 out_fail:
-	printk(KERN_ERR "failed to get NUMA memory information from SRAT"
+	printk(KERN_DEBUG "failed to get NUMA memory information from SRAT"
 			" table\n");
 	return 0;
 }
-- 
cgit v1.2.3


From d535e4319a2e598ba25dc966ada4e52ea774e33f Mon Sep 17 00:00:00 2001
From: Tobias Klauser <tklauser@distanz.ch>
Date: Fri, 4 Sep 2009 15:53:09 +0200
Subject: x86: Make memtype_seq_ops const

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/pat.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c
index e6718bb2806..e2900a36de0 100644
--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -826,7 +826,7 @@ static int memtype_seq_show(struct seq_file *seq, void *v)
 	return 0;
 }
 
-static struct seq_operations memtype_seq_ops = {
+static const struct seq_operations memtype_seq_ops = {
 	.start = memtype_seq_start,
 	.next  = memtype_seq_next,
 	.stop  = memtype_seq_stop,
-- 
cgit v1.2.3


From 56ddf7e6d4f69d7ce9f1c484b62e99d6b029e6f8 Mon Sep 17 00:00:00 2001
From: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Date: Wed, 2 Sep 2009 22:11:08 +0100
Subject: ARM: 5689/1: Update default config of HP Jornada 700-series machines

This patch updates the default config for HP Jornada 700-series handhelds.

Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/configs/jornada720_defconfig | 329 ++++++++++++++++++++++------------
 1 file changed, 210 insertions(+), 119 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/configs/jornada720_defconfig b/arch/arm/configs/jornada720_defconfig
index f3074e49f2f..df9bfbea861 100644
--- a/arch/arm/configs/jornada720_defconfig
+++ b/arch/arm/configs/jornada720_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc6
-# Tue Sep 16 18:56:58 2008
+# Linux kernel version: 2.6.31-rc6
+# Fri Aug 21 15:41:39 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -9,7 +9,6 @@ CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -18,16 +17,14 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_ZONE_DMA=y
 CONFIG_ARCH_MTD_XIP=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -44,10 +41,19 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -56,9 +62,11 @@ CONFIG_NAMESPACES=y
 # CONFIG_IPC_NS is not set
 # CONFIG_USER_NS is not set
 # CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
@@ -69,17 +77,22 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Performance Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
@@ -87,30 +100,25 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
 CONFIG_HAVE_CLK=y
-CONFIG_PROC_PAGE_MONITOR=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
 # CONFIG_MODULE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -126,7 +134,7 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
+CONFIG_FREEZER=y
 
 #
 # System Type
@@ -136,14 +144,15 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
@@ -152,23 +161,25 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
 # CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
 # CONFIG_ARCH_LOKI is not set
 # CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
 # CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
 # CONFIG_ARCH_RPC is not set
 CONFIG_ARCH_SA1100=y
 # CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-CONFIG_DMABOUNCE=y
 
 #
 # SA11x0 Implementations
@@ -188,14 +199,6 @@ CONFIG_SA1100_JORNADA720_SSP=y
 # CONFIG_SA1100_SIMPAD is not set
 CONFIG_SA1100_SSP=y
 
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
 #
 # Processor Type
 #
@@ -215,8 +218,8 @@ CONFIG_CPU_CP15_MMU=y
 #
 # CONFIG_CPU_ICACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
 CONFIG_SA1111=y
+CONFIG_DMABOUNCE=y
 CONFIG_FORCE_MAX_ZONEORDER=9
 
 #
@@ -246,30 +249,36 @@ CONFIG_TICK_ONESHOT=y
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
 # CONFIG_PREEMPT is not set
 CONFIG_HZ=100
 # CONFIG_AEABI is not set
-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_NODES_SHIFT=2
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 # CONFIG_FLATMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM_MANUAL=y
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_NEED_MULTIPLE_NODES=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_EXTREME=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 # CONFIG_LEDS is not set
 CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
 
 #
 # Boot options
@@ -281,9 +290,10 @@ CONFIG_CMDLINE=""
 # CONFIG_KEXEC is not set
 
 #
-# CPU Frequency scaling
+# CPU Power Management
 #
 # CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
 
 #
 # Floating point emulation
@@ -294,12 +304,14 @@ CONFIG_CMDLINE=""
 #
 CONFIG_FPE_NWFPE=y
 # CONFIG_FPE_NWFPE_XP is not set
-CONFIG_FPE_FASTFPE=y
+# CONFIG_FPE_FASTFPE is not set
 
 #
 # Userspace binary formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
 CONFIG_BINFMT_AOUT=y
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_ARTHUR is not set
@@ -353,7 +365,6 @@ CONFIG_INET_TCP_DIAG=y
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
 # CONFIG_IPV6 is not set
 # CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
@@ -367,10 +378,12 @@ CONFIG_NETFILTER_ADVANCED=y
 # CONFIG_NETFILTER_NETLINK_LOG is not set
 # CONFIG_NF_CONNTRACK is not set
 # CONFIG_NETFILTER_XTABLES is not set
+# CONFIG_IP_VS is not set
 
 #
 # IP: Netfilter Configuration
 #
+# CONFIG_NF_DEFRAG_IPV4 is not set
 # CONFIG_IP_NF_QUEUE is not set
 # CONFIG_IP_NF_IPTABLES is not set
 # CONFIG_IP_NF_ARPTABLES is not set
@@ -379,6 +392,7 @@ CONFIG_NETFILTER_ADVANCED=y
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -388,7 +402,10 @@ CONFIG_NETFILTER_ADVANCED=y
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -431,14 +448,17 @@ CONFIG_IRCOMM=m
 CONFIG_SA1100_FIR=m
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 
 #
-# Wireless
+# CFG80211 needs to be enabled for MAC80211
 #
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -464,29 +484,34 @@ CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_PNP is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_NBD=y
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
 CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
 # CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
 CONFIG_BLK_DEV_IDECS=y
 # CONFIG_BLK_DEV_IDECD is not set
 # CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
 # CONFIG_IDE_TASK_IOCTL is not set
 CONFIG_IDE_PROC_FS=y
 
@@ -513,8 +538,34 @@ CONFIG_DUMMY=y
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
-# CONFIG_NET_ETHERNET is not set
-CONFIG_MII=m
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_AX88796 is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_NET_VENDOR_RACAL is not set
+# CONFIG_DNET is not set
+# CONFIG_AT1700 is not set
+# CONFIG_DEPCA is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_ISA is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+# CONFIG_CS89x0 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
@@ -523,17 +574,27 @@ CONFIG_MII=m
 # Wireless LAN
 #
 # CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+CONFIG_WLAN_80211=y
+# CONFIG_PCMCIA_RAYCS is not set
+# CONFIG_LIBERTAS is not set
+# CONFIG_ATMEL is not set
+# CONFIG_AIRO_CS is not set
+# CONFIG_PCMCIA_WL3501 is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_HERMES is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 CONFIG_NET_PCMCIA=y
-CONFIG_PCMCIA_3C589=m
-CONFIG_PCMCIA_3C574=m
-CONFIG_PCMCIA_FMVJ18X=m
-CONFIG_PCMCIA_PCNET=m
-CONFIG_PCMCIA_NMCLAN=m
-CONFIG_PCMCIA_SMC91C92=m
-CONFIG_PCMCIA_XIRC2PS=m
-CONFIG_PCMCIA_AXNET=m
+# CONFIG_PCMCIA_3C589 is not set
+# CONFIG_PCMCIA_3C574 is not set
+# CONFIG_PCMCIA_FMVJ18X is not set
+# CONFIG_PCMCIA_PCNET is not set
+# CONFIG_PCMCIA_NMCLAN is not set
+# CONFIG_PCMCIA_SMC91C92 is not set
+# CONFIG_PCMCIA_XIRC2PS is not set
+# CONFIG_PCMCIA_AXNET is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -565,20 +626,23 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
 #
 CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+CONFIG_KEYBOARD_HP7XX=y
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_KEYBOARD_HP7XX=y
-# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_AD7879 is not set
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
 # CONFIG_TOUCHSCREEN_MTOUCH is not set
 # CONFIG_TOUCHSCREEN_INEXIO is not set
 # CONFIG_TOUCHSCREEN_MK712 is not set
@@ -587,8 +651,8 @@ CONFIG_TOUCHSCREEN_HP7XX=y
 # CONFIG_TOUCHSCREEN_PENMOUNT is not set
 # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
 # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
 # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
 # CONFIG_INPUT_MISC is not set
 
 #
@@ -624,11 +688,12 @@ CONFIG_SERIAL_SA1100_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=32
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=m
-# CONFIG_NVRAM is not set
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 
@@ -649,6 +714,10 @@ CONFIG_GPIOLIB=y
 # CONFIG_DEBUG_GPIO is not set
 # CONFIG_GPIO_SYSFS is not set
 
+#
+# Memory mapped GPIO expanders:
+#
+
 #
 # I2C GPIO expanders:
 #
@@ -663,12 +732,14 @@ CONFIG_GPIOLIB=y
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -676,6 +747,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
 # CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
@@ -687,22 +759,7 @@ CONFIG_SSB_POSSIBLE=y
 # Multimedia Capabilities Port drivers
 #
 # CONFIG_MCP_SA11X0 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -712,6 +769,7 @@ CONFIG_SSB_POSSIBLE=y
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
@@ -733,7 +791,17 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_SA1100 is not set
 CONFIG_FB_S1D13XXX=y
 # CONFIG_FB_VIRTUAL is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_LCD_HP700=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_BACKLIGHT_HP700=y
 
 #
 # Display device support
@@ -757,6 +825,8 @@ CONFIG_FONT_8x16=y
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_NEW_LEDS is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
@@ -781,12 +851,15 @@ CONFIG_RTC_INTF_DEV=y
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
 # CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -794,15 +867,10 @@ CONFIG_RTC_INTF_DEV=y
 #
 CONFIG_RTC_DRV_SA1100=y
 # CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -811,12 +879,16 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -825,6 +897,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -846,14 +923,12 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -862,6 +937,7 @@ CONFIG_SYSFS=y
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -870,6 +946,7 @@ CONFIG_SYSFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 # CONFIG_NETWORK_FILESYSTEMS is not set
 
 #
@@ -935,12 +1012,16 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -958,19 +1039,20 @@ CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 CONFIG_FRAME_POINTER=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
@@ -985,13 +1067,16 @@ CONFIG_DEBUG_LL=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -1062,15 +1147,21 @@ CONFIG_CRYPTO=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -1078,7 +1169,7 @@ CONFIG_CRC_CCITT=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
-- 
cgit v1.2.3


From d656f07a7405e788e1275d0238b67f593615f2bb Mon Sep 17 00:00:00 2001
From: sedji gaouaou <sedji.gaouaou@atmel.com>
Date: Thu, 6 Aug 2009 15:20:22 +0100
Subject: ARM: 5640/1: This patch modifies the support of AC97 on the
 at91sam9263 ek board

This patch modifies the support of AC97 on the at91sam9263 ek board, so it would
share the code with AVR32.
Plus it removes a typo in at91sam9263_devices.c.

Signed-off-by: Sedji Gaouaou <sedji.gaouaou@atmel.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/at91sam9263_devices.c | 14 +++++++-------
 arch/arm/mach-at91/board-sam9263ek.c     |  2 +-
 arch/arm/mach-at91/include/mach/board.h  |  6 ++----
 3 files changed, 10 insertions(+), 12 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index b7f23324231..55719a97427 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -707,9 +707,9 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
  *  AC97
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_SND_AT91_AC97) || defined(CONFIG_SND_AT91_AC97_MODULE)
+#if defined(CONFIG_SND_ATMEL_AC97C) || defined(CONFIG_SND_ATMEL_AC97C_MODULE)
 static u64 ac97_dmamask = DMA_BIT_MASK(32);
-static struct atmel_ac97_data ac97_data;
+static struct ac97c_platform_data ac97_data;
 
 static struct resource ac97_resources[] = {
 	[0] = {
@@ -725,8 +725,8 @@ static struct resource ac97_resources[] = {
 };
 
 static struct platform_device at91sam9263_ac97_device = {
-	.name		= "ac97c",
-	.id		= 1,
+	.name		= "atmel_ac97c",
+	.id		= 0,
 	.dev		= {
 				.dma_mask		= &ac97_dmamask,
 				.coherent_dma_mask	= DMA_BIT_MASK(32),
@@ -736,7 +736,7 @@ static struct platform_device at91sam9263_ac97_device = {
 	.num_resources	= ARRAY_SIZE(ac97_resources),
 };
 
-void __init at91_add_device_ac97(struct atmel_ac97_data *data)
+void __init at91_add_device_ac97(struct ac97c_platform_data *data)
 {
 	if (!data)
 		return;
@@ -750,11 +750,11 @@ void __init at91_add_device_ac97(struct atmel_ac97_data *data)
 	if (data->reset_pin)
 		at91_set_gpio_output(data->reset_pin, 0);
 
-	ac97_data = *ek_data;
+	ac97_data = *data;
 	platform_device_register(&at91sam9263_ac97_device);
 }
 #else
-void __init at91_add_device_ac97(struct atmel_ac97_data *data) {}
+void __init at91_add_device_ac97(struct ac97c_platform_data *data) {}
 #endif
 
 
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index 57d52528f22..3b669b78e45 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -365,7 +365,7 @@ static void __init ek_add_device_buttons(void) {}
 /*
  * AC97
  */
-static struct atmel_ac97_data ek_ac97_data = {
+static struct ac97c_platform_data ek_ac97_data = {
 	.reset_pin	= AT91_PIN_PA13,
 };
 
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index 74801d275cd..13f27a4b882 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -37,6 +37,7 @@
 #include <linux/leds.h>
 #include <linux/spi/spi.h>
 #include <linux/usb/atmel_usba_udc.h>
+#include <sound/atmel-ac97c.h>
 
  /* USB Device */
 struct at91_udc_data {
@@ -174,10 +175,7 @@ struct atmel_lcdfb_info;
 extern void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data);
 
  /* AC97 */
-struct atmel_ac97_data {
-	u8		reset_pin;	/* reset */
-};
-extern void __init at91_add_device_ac97(struct atmel_ac97_data *data);
+extern void __init at91_add_device_ac97(struct ac97c_platform_data *data);
 
  /* ISI */
 extern void __init at91_add_device_isi(void);
-- 
cgit v1.2.3


From 8c3cbd5a2b2cc244277f6089dae83f09f1e7a27b Mon Sep 17 00:00:00 2001
From: Nicolas Ferre <nicolas.ferre@atmel.com>
Date: Wed, 26 Aug 2009 15:33:16 +0100
Subject: ARM: 5686/1: at91: Correct AC97 reset line in at91sam9263ek board

Board code was wrongly setting up the reset pin for AC97 on at91sam9263ek.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-at91/board-sam9263ek.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index 3b669b78e45..1bf7bd4cbe1 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -364,9 +364,9 @@ static void __init ek_add_device_buttons(void) {}
 
 /*
  * AC97
+ * reset_pin is not connected: NRST
  */
 static struct ac97c_platform_data ek_ac97_data = {
-	.reset_pin	= AT91_PIN_PA13,
 };
 
 
-- 
cgit v1.2.3


From 5dbc46506a4f7b9f564bb7589a49ed32bc1caa15 Mon Sep 17 00:00:00 2001
From: Krzysztof Halasa <khc@pm.waw.pl>
Date: Sat, 5 Sep 2009 03:59:49 +0000
Subject: IXP42x HSS support for setting internal clock rate
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

HSS usually uses external clocks, so it's not a big deal. Internal clock
is used for direct DTE-DTE connections and when the DCE doesn't provide
it's own clock.

This also depends on the oscillator frequency. Intel seems to have
calculated the clock register settings for 33.33 MHz (66.66 MHz timer
base). Their settings seem quite suboptimal both in terms of average
frequency (60 ppm is unacceptable for G.703 applications, their primary
intended usage(?)) and jitter.

Many (most?) platforms use a 33.333 MHz oscillator, a 10 ppm difference
from Intel's base.

Instead of creating static tables, I've created a procedure to program
the HSS clock register. The register consists of 3 parts (A, B, C).
The average frequency (= bit rate) is:
66.66x MHz / (A  + (B + 1) / (C + 1))
The procedure aims at the closest average frequency, possibly at the
cost of increased jitter. Nobody would be able to directly drive an
unbufferred transmitter with a HSS anyway, and the frequency error is
what it really counts.

I've verified the above with an oscilloscope on IXP425. It seems IXP46x
and possibly IXP43x use a bit different clock generation algorithm - it
looks like the avg frequency is:
(on IXP465) 66.66x MHz / (A  + B / (C + 1)).
Also they use much greater precomputed A and B - on IXP425 it would
simply result in more jitter, but I don't know how does it work on
IXP46x (perhaps 3 least significant bits aren't used?).

Anyway it looks that they were aiming for exactly +60 ppm or -60 ppm,
while <1 ppm is typically possible (with a synchronized clock, of
course).

The attached patch makes it possible to set almost any bit rate
(my IXP425 533 MHz quits at > 22 Mb/s if a single port is used, and the
minimum is ca. 65 Kb/s).

This is independent of MVIP (multi-E1/T1 on one HSS) mode.

Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/arm/mach-ixp4xx/common.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index 1e93dfee754..5083f03e9b5 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -416,6 +416,7 @@ static struct clocksource clocksource_ixp4xx = {
 };
 
 unsigned long ixp4xx_timer_freq = FREQ;
+EXPORT_SYMBOL(ixp4xx_timer_freq);
 static int __init ixp4xx_clocksource_init(void)
 {
 	clocksource_ixp4xx.mult =
-- 
cgit v1.2.3


From 99f329a2ba3c2d07cc90ca9309babf27ddf98bff Mon Sep 17 00:00:00 2001
From: Pavel Machek <pavel@ucw.cz>
Date: Sun, 6 Sep 2009 07:28:40 +0200
Subject: [ARM] pxa/sharpsl_pm: zaurus c3000 aka spitz: fix resume

sharpsl_pm.c code tries to read battery state very early during
resume, but those battery meters are connected on SPI and that's only
resumed way later.

Replace the check with simple checking of battery fatal signal, that
actually works at this stage.

Signed-off-by: Pavel Machek <pavel@ucw.cz>
Tested-by: Stanislav Brabec <utx@penguin.cz>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
---
 arch/arm/mach-pxa/sharpsl_pm.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c
index 2546c066cd6..629e05d1196 100644
--- a/arch/arm/mach-pxa/sharpsl_pm.c
+++ b/arch/arm/mach-pxa/sharpsl_pm.c
@@ -678,8 +678,8 @@ static int corgi_enter_suspend(unsigned long alarm_time, unsigned int alarm_enab
 		dev_dbg(sharpsl_pm.dev, "User triggered wakeup in offline charger.\n");
 	}
 
-	if ((!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_LOCK)) || (sharpsl_fatal_check() < 0) )
-	{
+	if ((!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_LOCK)) ||
+	    (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_FATAL)))	{
 		dev_err(sharpsl_pm.dev, "Fatal condition. Suspend.\n");
 		corgi_goto_sleep(alarm_time, alarm_enable, state);
 		return 1;
-- 
cgit v1.2.3


From a8fae3ec5f118dc92517dcbed3ecf69ddb641d0f Mon Sep 17 00:00:00 2001
From: Peter Zijlstra <a.p.zijlstra@chello.nl>
Date: Mon, 7 Sep 2009 18:32:32 +0200
Subject: sched: enable SD_WAKE_IDLE

Now that SD_WAKE_IDLE doesn't make pipe-test suck anymore,
enable it by default for MC, CPU and NUMA domains.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/topology.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/topology.h b/arch/x86/include/asm/topology.h
index ef7bc7fc252..26d06e052a1 100644
--- a/arch/x86/include/asm/topology.h
+++ b/arch/x86/include/asm/topology.h
@@ -152,7 +152,7 @@ extern unsigned long node_remap_size[];
 				| 0*SD_POWERSAVINGS_BALANCE		\
 				| 0*SD_SHARE_PKG_RESOURCES		\
 				| 1*SD_SERIALIZE			\
-				| 0*SD_WAKE_IDLE_FAR			\
+				| 1*SD_WAKE_IDLE_FAR			\
 				| 0*SD_PREFER_SIBLING			\
 				,					\
 	.last_balance		= jiffies,				\
-- 
cgit v1.2.3


From 54782674084ed9dc829050a8c18298db6847679d Mon Sep 17 00:00:00 2001
From: Simon Guinot <sguinot@lacie.com>
Date: Tue, 23 Jun 2009 13:54:35 +0200
Subject: [ARM] orion5x: Add LaCie NAS 2Big Network support

This patch add support for the 2Big Network LaCie boards.

Signed-off-by: Simon Guinot <sguinot@lacie.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
---
 arch/arm/mach-orion5x/Kconfig         |   7 +
 arch/arm/mach-orion5x/Makefile        |   1 +
 arch/arm/mach-orion5x/net2big-setup.c | 431 ++++++++++++++++++++++++++++++++++
 3 files changed, 439 insertions(+)
 create mode 100644 arch/arm/mach-orion5x/net2big-setup.c

(limited to 'arch')

diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig
index 5062b05b76b..c3d513cad5a 100644
--- a/arch/arm/mach-orion5x/Kconfig
+++ b/arch/arm/mach-orion5x/Kconfig
@@ -103,6 +103,13 @@ config MACH_BIGDISK
 	  Say 'Y' here if you want your kernel to support the
 	  LaCie Big Disk Network NAS.
 
+config MACH_NET2BIG
+	bool "LaCie 2Big Network"
+	select I2C_BOARDINFO
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  LaCie 2Big Network NAS.
+
 config MACH_MSS2
 	bool "Maxtor Shared Storage II"
 	help
diff --git a/arch/arm/mach-orion5x/Makefile b/arch/arm/mach-orion5x/Makefile
index 1db8a3a2708..89772fcd65c 100644
--- a/arch/arm/mach-orion5x/Makefile
+++ b/arch/arm/mach-orion5x/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_MACH_MV2120)	+= mv2120-setup.o
 obj-$(CONFIG_MACH_EDMINI_V2)	+= edmini_v2-setup.o
 obj-$(CONFIG_MACH_D2NET)	+= d2net-setup.o
 obj-$(CONFIG_MACH_BIGDISK)	+= d2net-setup.o
+obj-$(CONFIG_MACH_NET2BIG)	+= net2big-setup.o
 obj-$(CONFIG_MACH_MSS2)		+= mss2-setup.o
 obj-$(CONFIG_MACH_WNR854T)	+= wnr854t-setup.o
 obj-$(CONFIG_MACH_RD88F5181L_GE)	+= rd88f5181l-ge-setup.o
diff --git a/arch/arm/mach-orion5x/net2big-setup.c b/arch/arm/mach-orion5x/net2big-setup.c
new file mode 100644
index 00000000000..7bd6283476f
--- /dev/null
+++ b/arch/arm/mach-orion5x/net2big-setup.c
@@ -0,0 +1,431 @@
+/*
+ * arch/arm/mach-orion5x/net2big-setup.c
+ *
+ * LaCie 2Big Network NAS setup
+ *
+ * Copyright (C) 2009 Simon Guinot <sguinot@lacie.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/leds.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+#include <linux/ata_platform.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/orion5x.h>
+#include "common.h"
+#include "mpp.h"
+
+/*****************************************************************************
+ * LaCie 2Big Network Info
+ ****************************************************************************/
+
+/*
+ * 512KB NOR flash Device bus boot chip select
+ */
+
+#define NET2BIG_NOR_BOOT_BASE		0xfff80000
+#define NET2BIG_NOR_BOOT_SIZE		SZ_512K
+
+/*****************************************************************************
+ * 512KB NOR Flash on Boot Device
+ ****************************************************************************/
+
+/*
+ * TODO: Check write support on flash MX29LV400CBTC-70G
+ */
+
+static struct mtd_partition net2big_partitions[] = {
+	{
+		.name		= "Full512kb",
+		.size		= MTDPART_SIZ_FULL,
+		.offset		= 0x00000000,
+		.mask_flags	= MTD_WRITEABLE,
+	},
+};
+
+static struct physmap_flash_data net2big_nor_flash_data = {
+	.width		= 1,
+	.parts		= net2big_partitions,
+	.nr_parts	= ARRAY_SIZE(net2big_partitions),
+};
+
+static struct resource net2big_nor_flash_resource = {
+	.flags			= IORESOURCE_MEM,
+	.start			= NET2BIG_NOR_BOOT_BASE,
+	.end			= NET2BIG_NOR_BOOT_BASE
+					+ NET2BIG_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device net2big_nor_flash = {
+	.name			= "physmap-flash",
+	.id			= 0,
+	.dev		= {
+		.platform_data	= &net2big_nor_flash_data,
+	},
+	.num_resources		= 1,
+	.resource		= &net2big_nor_flash_resource,
+};
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+
+static struct mv643xx_eth_platform_data net2big_eth_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
+};
+
+/*****************************************************************************
+ * I2C devices
+ ****************************************************************************/
+
+/*
+ * i2c addr | chip         | description
+ * 0x32     | Ricoh 5C372b | RTC
+ * 0x50     | HT24LC08     | eeprom (1kB)
+ */
+static struct i2c_board_info __initdata net2big_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("rs5c372b", 0x32),
+	}, {
+		I2C_BOARD_INFO("24c08", 0x50),
+	},
+};
+
+/*****************************************************************************
+ * SATA
+ ****************************************************************************/
+
+static struct mv_sata_platform_data net2big_sata_data = {
+	.n_ports	= 2,
+};
+
+#define NET2BIG_GPIO_SATA_POWER_REQ	19
+#define NET2BIG_GPIO_SATA0_POWER	23
+#define NET2BIG_GPIO_SATA1_POWER	25
+
+static void __init net2big_sata_power_init(void)
+{
+	int err;
+
+	/* Configure GPIOs over MPP max number. */
+	orion_gpio_set_valid(NET2BIG_GPIO_SATA0_POWER, 1);
+	orion_gpio_set_valid(NET2BIG_GPIO_SATA1_POWER, 1);
+
+	err = gpio_request(NET2BIG_GPIO_SATA0_POWER, "SATA0 power status");
+	if (err == 0) {
+		err = gpio_direction_input(NET2BIG_GPIO_SATA0_POWER);
+		if (err)
+			gpio_free(NET2BIG_GPIO_SATA0_POWER);
+	}
+	if (err) {
+		pr_err("net2big: failed to setup SATA0 power GPIO\n");
+		return;
+	}
+
+	err = gpio_request(NET2BIG_GPIO_SATA1_POWER, "SATA1 power status");
+	if (err == 0) {
+		err = gpio_direction_input(NET2BIG_GPIO_SATA1_POWER);
+		if (err)
+			gpio_free(NET2BIG_GPIO_SATA1_POWER);
+	}
+	if (err) {
+		pr_err("net2big: failed to setup SATA1 power GPIO\n");
+		goto err_free_1;
+	}
+
+	err = gpio_request(NET2BIG_GPIO_SATA_POWER_REQ, "SATA power request");
+	if (err == 0) {
+		err = gpio_direction_output(NET2BIG_GPIO_SATA_POWER_REQ, 0);
+		if (err)
+			gpio_free(NET2BIG_GPIO_SATA_POWER_REQ);
+	}
+	if (err) {
+		pr_err("net2big: failed to setup SATA power request GPIO\n");
+		goto err_free_2;
+	}
+
+	if (gpio_get_value(NET2BIG_GPIO_SATA0_POWER) &&
+		gpio_get_value(NET2BIG_GPIO_SATA1_POWER)) {
+		return;
+	}
+
+	/*
+	 * SATA power up on both disk is done by pulling high the CPLD power
+	 * request line. The 300ms delay is related to the CPLD clock and is
+	 * needed to be sure that the CPLD has take into account the low line
+	 * status.
+	 */
+	msleep(300);
+	gpio_set_value(NET2BIG_GPIO_SATA_POWER_REQ, 1);
+	pr_info("net2big: power up SATA hard disks\n");
+
+	return;
+
+err_free_2:
+	gpio_free(NET2BIG_GPIO_SATA1_POWER);
+err_free_1:
+	gpio_free(NET2BIG_GPIO_SATA0_POWER);
+
+	return;
+}
+
+/*****************************************************************************
+ * GPIO LEDs
+ ****************************************************************************/
+
+/*
+ * The power front LEDs (blue and red) and SATA red LEDs are controlled via a
+ * single GPIO line and are compatible with the leds-gpio driver.
+ *
+ * The SATA blue LEDs have some hardware blink capabilities which are detailled
+ * in the following array:
+ *
+ * SATAx blue LED | SATAx activity | LED state
+ *                |                |
+ *       0        |       0        |  blink (rate 300ms)
+ *       1        |       0        |  off
+ *       ?        |       1        |  on
+ *
+ * Notes: The blue and the red front LED's can't be on at the same time.
+ *        Blue LED have priority.
+ */
+
+#define NET2BIG_GPIO_PWR_RED_LED	6
+#define NET2BIG_GPIO_PWR_BLUE_LED	16
+#define NET2BIG_GPIO_PWR_LED_BLINK_STOP	7
+
+#define NET2BIG_GPIO_SATA0_RED_LED	11
+#define NET2BIG_GPIO_SATA1_RED_LED	10
+
+#define NET2BIG_GPIO_SATA0_BLUE_LED	17
+#define NET2BIG_GPIO_SATA1_BLUE_LED	13
+
+static struct gpio_led net2big_leds[] = {
+	{
+		.name = "net2big:red:power",
+		.gpio = NET2BIG_GPIO_PWR_RED_LED,
+	},
+	{
+		.name = "net2big:blue:power",
+		.gpio = NET2BIG_GPIO_PWR_BLUE_LED,
+	},
+	{
+		.name = "net2big:red:sata0",
+		.gpio = NET2BIG_GPIO_SATA0_RED_LED,
+	},
+	{
+		.name = "net2big:red:sata1",
+		.gpio = NET2BIG_GPIO_SATA1_RED_LED,
+	},
+};
+
+static struct gpio_led_platform_data net2big_led_data = {
+	.num_leds = ARRAY_SIZE(net2big_leds),
+	.leds = net2big_leds,
+};
+
+static struct platform_device net2big_gpio_leds = {
+	.name           = "leds-gpio",
+	.id             = -1,
+	.dev            = {
+		.platform_data  = &net2big_led_data,
+	},
+};
+
+static void __init net2big_gpio_leds_init(void)
+{
+	int err;
+
+	/* Stop initial CPLD slow red/blue blinking on power LED. */
+	err = gpio_request(NET2BIG_GPIO_PWR_LED_BLINK_STOP,
+			   "Power LED blink stop");
+	if (err == 0) {
+		err = gpio_direction_output(NET2BIG_GPIO_PWR_LED_BLINK_STOP, 1);
+		if (err)
+			gpio_free(NET2BIG_GPIO_PWR_LED_BLINK_STOP);
+	}
+	if (err)
+		pr_err("net2big: failed to setup power LED blink GPIO\n");
+
+	/*
+	 * Configure SATA0 and SATA1 blue LEDs to blink in relation with the
+	 * hard disk activity.
+	 */
+	err = gpio_request(NET2BIG_GPIO_SATA0_BLUE_LED,
+			   "SATA0 blue LED control");
+	if (err == 0) {
+		err = gpio_direction_output(NET2BIG_GPIO_SATA0_BLUE_LED, 1);
+		if (err)
+			gpio_free(NET2BIG_GPIO_SATA0_BLUE_LED);
+	}
+	if (err)
+		pr_err("net2big: failed to setup SATA0 blue LED GPIO\n");
+
+	err = gpio_request(NET2BIG_GPIO_SATA1_BLUE_LED,
+			   "SATA1 blue LED control");
+	if (err == 0) {
+		err = gpio_direction_output(NET2BIG_GPIO_SATA1_BLUE_LED, 1);
+		if (err)
+			gpio_free(NET2BIG_GPIO_SATA1_BLUE_LED);
+	}
+	if (err)
+		pr_err("net2big: failed to setup SATA1 blue LED GPIO\n");
+
+	platform_device_register(&net2big_gpio_leds);
+}
+
+/****************************************************************************
+ * GPIO keys
+ ****************************************************************************/
+
+#define NET2BIG_GPIO_PUSH_BUTTON	18
+#define NET2BIG_GPIO_POWER_SWITCH_ON	8
+#define NET2BIG_GPIO_POWER_SWITCH_OFF	9
+
+#define NET2BIG_SWITCH_POWER_ON		0x1
+#define NET2BIG_SWITCH_POWER_OFF	0x2
+
+static struct gpio_keys_button net2big_buttons[] = {
+	{
+		.type		= EV_SW,
+		.code		= NET2BIG_SWITCH_POWER_OFF,
+		.gpio		= NET2BIG_GPIO_POWER_SWITCH_OFF,
+		.desc		= "Power rocker switch (auto|off)",
+		.active_low	= 0,
+	},
+	{
+		.type		= EV_SW,
+		.code		= NET2BIG_SWITCH_POWER_ON,
+		.gpio		= NET2BIG_GPIO_POWER_SWITCH_ON,
+		.desc		= "Power rocker switch (on|auto)",
+		.active_low	= 0,
+	},
+	{
+		.type		= EV_KEY,
+		.code		= KEY_POWER,
+		.gpio		= NET2BIG_GPIO_PUSH_BUTTON,
+		.desc		= "Front Push Button",
+		.active_low	= 0,
+	},
+};
+
+static struct gpio_keys_platform_data net2big_button_data = {
+	.buttons	= net2big_buttons,
+	.nbuttons	= ARRAY_SIZE(net2big_buttons),
+};
+
+static struct platform_device net2big_gpio_buttons = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &net2big_button_data,
+	},
+};
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+
+static struct orion5x_mpp_mode net2big_mpp_modes[] __initdata = {
+	{  0, MPP_GPIO },	/* Raid mode (bit 0) */
+	{  1, MPP_GPIO },	/* USB port 2 fuse (0 = Fail, 1 = Ok) */
+	{  2, MPP_GPIO },	/* Raid mode (bit 1) */
+	{  3, MPP_GPIO },	/* Board ID (bit 0) */
+	{  4, MPP_GPIO },	/* Fan activity (0 = Off, 1 = On) */
+	{  5, MPP_GPIO },	/* Fan fail detection */
+	{  6, MPP_GPIO },	/* Red front LED (0 = Off, 1 = On) */
+	{  7, MPP_GPIO },	/* Disable initial blinking on front LED */
+	{  8, MPP_GPIO },	/* Rear power switch (on|auto) */
+	{  9, MPP_GPIO },	/* Rear power switch (auto|off) */
+	{ 10, MPP_GPIO },	/* SATA 1 red LED (0 = Off, 1 = On) */
+	{ 11, MPP_GPIO },	/* SATA 0 red LED (0 = Off, 1 = On) */
+	{ 12, MPP_GPIO },	/* Board ID (bit 1) */
+	{ 13, MPP_GPIO },	/* SATA 1 blue LED blink control */
+	{ 14, MPP_SATA_LED },
+	{ 15, MPP_SATA_LED },
+	{ 16, MPP_GPIO },	/* Blue front LED control */
+	{ 17, MPP_GPIO },	/* SATA 0 blue LED blink control */
+	{ 18, MPP_GPIO },	/* Front button (0 = Released, 1 = Pushed ) */
+	{ 19, MPP_GPIO },	/* SATA{0,1} power On/Off request */
+	{ -1 }
+	/* 22: USB port 1 fuse (0 = Fail, 1 = Ok) */
+	/* 23: SATA 0 power status */
+	/* 24: Board power off */
+	/* 25: SATA 1 power status */
+};
+
+#define NET2BIG_GPIO_POWER_OFF		24
+
+static void net2big_power_off(void)
+{
+	gpio_set_value(NET2BIG_GPIO_POWER_OFF, 1);
+}
+
+static void __init net2big_init(void)
+{
+	/*
+	 * Setup basic Orion functions. Need to be called early.
+	 */
+	orion5x_init();
+
+	orion5x_mpp_conf(net2big_mpp_modes);
+
+	/*
+	 * Configure peripherals.
+	 */
+	orion5x_ehci0_init();
+	orion5x_ehci1_init();
+	orion5x_eth_init(&net2big_eth_data);
+	orion5x_i2c_init();
+	orion5x_uart0_init();
+	orion5x_xor_init();
+
+	net2big_sata_power_init();
+	orion5x_sata_init(&net2big_sata_data);
+
+	orion5x_setup_dev_boot_win(NET2BIG_NOR_BOOT_BASE,
+				   NET2BIG_NOR_BOOT_SIZE);
+	platform_device_register(&net2big_nor_flash);
+
+	platform_device_register(&net2big_gpio_buttons);
+	net2big_gpio_leds_init();
+
+	i2c_register_board_info(0, net2big_i2c_devices,
+				ARRAY_SIZE(net2big_i2c_devices));
+
+	orion_gpio_set_valid(NET2BIG_GPIO_POWER_OFF, 1);
+
+	if (gpio_request(NET2BIG_GPIO_POWER_OFF, "power-off") == 0 &&
+	    gpio_direction_output(NET2BIG_GPIO_POWER_OFF, 0) == 0)
+		pm_power_off = net2big_power_off;
+	else
+		pr_err("net2big: failed to configure power-off GPIO\n");
+
+	pr_notice("net2big: Flash writing is not yet supported.\n");
+}
+
+/* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */
+MACHINE_START(NET2BIG, "LaCie 2Big Network")
+	.phys_io	= ORION5X_REGS_PHYS_BASE,
+	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
+	.boot_params	= 0x00000100,
+	.init_machine	= net2big_init,
+	.map_io		= orion5x_map_io,
+	.init_irq	= orion5x_init_irq,
+	.timer		= &orion5x_timer,
+	.fixup		= tag_fixup_mem32,
+MACHINE_END
+
-- 
cgit v1.2.3


From 3e5cd1f2576c720f1d0705fdd7ba64f27e8836b7 Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Sun, 16 Aug 2009 21:02:36 +0900
Subject: dmi: extend dmi_get_year() to dmi_get_date()

There are cases where full date information is required instead of
just the year.  Add month and day parsing to dmi_get_year() and rename
it to dmi_get_date().

As the original function only required '/' followed by any number of
parseable characters at the end of the string, keep that behavior to
avoid upsetting existing users.

The new function takes dates of format [mm[/dd]]/yy[yy].  Year, month
and date are checked to be in the ranges of [1-9999], [1-12] and
[1-31] respectively and any invalid or out-of-range component is
returned as zero.

The dummy implementation is updated accordingly but the return value
is updated to indicate field not found which is consistent with how
other dummy functions behave.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 arch/x86/pci/direct.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/pci/direct.c b/arch/x86/pci/direct.c
index bd13c3e4c6d..347d882b3bb 100644
--- a/arch/x86/pci/direct.c
+++ b/arch/x86/pci/direct.c
@@ -192,13 +192,14 @@ struct pci_raw_ops pci_direct_conf2 = {
 static int __init pci_sanity_check(struct pci_raw_ops *o)
 {
 	u32 x = 0;
-	int devfn;
+	int year, devfn;
 
 	if (pci_probe & PCI_NO_CHECKS)
 		return 1;
 	/* Assume Type 1 works for newer systems.
 	   This handles machines that don't have anything on PCI Bus 0. */
-	if (dmi_get_year(DMI_BIOS_DATE) >= 2001)
+	dmi_get_date(DMI_BIOS_DATE, &year, NULL, NULL);
+	if (year >= 2001)
 		return 1;
 
 	for (devfn = 0; devfn < 0x100; devfn++) {
-- 
cgit v1.2.3


From a8f22264550e64c0cd11fb6647284b0bd6407f9c Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Tue, 8 Sep 2009 23:16:06 -0700
Subject: sparc64: Manage NMI watchdog enabling like x86.

Use a per-cpu 'wd_enabled' boolean and a global atomic_t count
of watchdog NMI enabled cpus which is set to '-1' if something
is wrong with the watchdog and it can't be used.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/include/asm/nmi.h |  2 +-
 arch/sparc/kernel/nmi.c      | 60 +++++++++++++++++++++++++++++++-------------
 arch/sparc/oprofile/init.c   |  2 +-
 3 files changed, 45 insertions(+), 19 deletions(-)

(limited to 'arch')

diff --git a/arch/sparc/include/asm/nmi.h b/arch/sparc/include/asm/nmi.h
index fbd546dd4fe..c7d11e435df 100644
--- a/arch/sparc/include/asm/nmi.h
+++ b/arch/sparc/include/asm/nmi.h
@@ -5,6 +5,6 @@ extern int __init nmi_init(void);
 extern void perfctr_irq(int irq, struct pt_regs *regs);
 extern void nmi_adjust_hz(unsigned int new_hz);
 
-extern int nmi_usable;
+extern atomic_t nmi_active;
 
 #endif /* __NMI_H */
diff --git a/arch/sparc/kernel/nmi.c b/arch/sparc/kernel/nmi.c
index 2c0cc72d295..d1614e8384a 100644
--- a/arch/sparc/kernel/nmi.c
+++ b/arch/sparc/kernel/nmi.c
@@ -34,10 +34,17 @@
 static int nmi_watchdog_active;
 static int panic_on_timeout;
 
-int nmi_usable;
-EXPORT_SYMBOL_GPL(nmi_usable);
+/* nmi_active:
+ * >0: the NMI watchdog is active, but can be disabled
+ * <0: the NMI watchdog has not been set up, and cannot be enabled
+ *  0: the NMI watchdog is disabled, but can be enabled
+ */
+atomic_t nmi_active = ATOMIC_INIT(0);		/* oprofile uses this */
+EXPORT_SYMBOL(nmi_active);
 
 static unsigned int nmi_hz = HZ;
+static DEFINE_PER_CPU(short, wd_enabled);
+static int endflag __initdata;
 
 static DEFINE_PER_CPU(unsigned int, last_irq_sum);
 static DEFINE_PER_CPU(local_t, alert_counter);
@@ -110,7 +117,7 @@ notrace __kprobes void perfctr_irq(int irq, struct pt_regs *regs)
 		__get_cpu_var(last_irq_sum) = sum;
 		local_set(&__get_cpu_var(alert_counter), 0);
 	}
-	if (nmi_usable) {
+	if (__get_cpu_var(wd_enabled)) {
 		write_pic(picl_value(nmi_hz));
 		pcr_ops->write(pcr_enable);
 	}
@@ -121,8 +128,6 @@ static inline unsigned int get_nmi_count(int cpu)
 	return cpu_data(cpu).__nmi_count;
 }
 
-static int endflag __initdata;
-
 static __init void nmi_cpu_busy(void *data)
 {
 	local_irq_enable_in_hardirq();
@@ -143,12 +148,15 @@ static void report_broken_nmi(int cpu, int *prev_nmi_count)
 	printk(KERN_WARNING
 		"and attach the output of the 'dmesg' command.\n");
 
-	nmi_usable = 0;
+	per_cpu(wd_enabled, cpu) = 0;
+	atomic_dec(&nmi_active);
 }
 
-static void stop_watchdog(void *unused)
+static void stop_nmi_watchdog(void *unused)
 {
 	pcr_ops->write(PCR_PIC_PRIV);
+	__get_cpu_var(wd_enabled) = 0;
+	atomic_dec(&nmi_active);
 }
 
 static int __init check_nmi_watchdog(void)
@@ -156,6 +164,9 @@ static int __init check_nmi_watchdog(void)
 	unsigned int *prev_nmi_count;
 	int cpu, err;
 
+	if (!atomic_read(&nmi_active))
+		return 0;
+
 	prev_nmi_count = kmalloc(nr_cpu_ids * sizeof(unsigned int), GFP_KERNEL);
 	if (!prev_nmi_count) {
 		err = -ENOMEM;
@@ -172,12 +183,15 @@ static int __init check_nmi_watchdog(void)
 	mdelay((20 * 1000) / nmi_hz); /* wait 20 ticks */
 
 	for_each_online_cpu(cpu) {
+		if (!per_cpu(wd_enabled, cpu))
+			continue;
 		if (get_nmi_count(cpu) - prev_nmi_count[cpu] <= 5)
 			report_broken_nmi(cpu, prev_nmi_count);
 	}
 	endflag = 1;
-	if (!nmi_usable) {
+	if (!atomic_read(&nmi_active)) {
 		kfree(prev_nmi_count);
+		atomic_set(&nmi_active, -1);
 		err = -ENODEV;
 		goto error;
 	}
@@ -188,12 +202,26 @@ static int __init check_nmi_watchdog(void)
 	kfree(prev_nmi_count);
 	return 0;
 error:
-	on_each_cpu(stop_watchdog, NULL, 1);
+	on_each_cpu(stop_nmi_watchdog, NULL, 1);
 	return err;
 }
 
-static void start_watchdog(void *unused)
+static void start_nmi_watchdog(void *unused)
+{
+	__get_cpu_var(wd_enabled) = 1;
+	atomic_inc(&nmi_active);
+
+	pcr_ops->write(PCR_PIC_PRIV);
+	write_pic(picl_value(nmi_hz));
+
+	pcr_ops->write(pcr_enable);
+}
+
+static void nmi_adjust_hz_one(void *unused)
 {
+	if (!__get_cpu_var(wd_enabled))
+		return;
+
 	pcr_ops->write(PCR_PIC_PRIV);
 	write_pic(picl_value(nmi_hz));
 
@@ -203,13 +231,13 @@ static void start_watchdog(void *unused)
 void nmi_adjust_hz(unsigned int new_hz)
 {
 	nmi_hz = new_hz;
-	on_each_cpu(start_watchdog, NULL, 1);
+	on_each_cpu(nmi_adjust_hz_one, NULL, 1);
 }
 EXPORT_SYMBOL_GPL(nmi_adjust_hz);
 
 static int nmi_shutdown(struct notifier_block *nb, unsigned long cmd, void *p)
 {
-	on_each_cpu(stop_watchdog, NULL, 1);
+	on_each_cpu(stop_nmi_watchdog, NULL, 1);
 	return 0;
 }
 
@@ -221,16 +249,14 @@ int __init nmi_init(void)
 {
 	int err;
 
-	nmi_usable = 1;
-
-	on_each_cpu(start_watchdog, NULL, 1);
+	on_each_cpu(start_nmi_watchdog, NULL, 1);
 
 	err = check_nmi_watchdog();
 	if (!err) {
 		err = register_reboot_notifier(&nmi_reboot_notifier);
 		if (err) {
-			nmi_usable = 0;
-			on_each_cpu(stop_watchdog, NULL, 1);
+			on_each_cpu(stop_nmi_watchdog, NULL, 1);
+			atomic_set(&nmi_active, -1);
 		}
 	}
 	return err;
diff --git a/arch/sparc/oprofile/init.c b/arch/sparc/oprofile/init.c
index d172f86439b..9ce34fd294c 100644
--- a/arch/sparc/oprofile/init.c
+++ b/arch/sparc/oprofile/init.c
@@ -57,7 +57,7 @@ static void timer_stop(void)
 
 static int op_nmi_timer_init(struct oprofile_operations *ops)
 {
-	if (!nmi_usable)
+	if (atomic_read(&nmi_active) <= 0)
 		return -ENODEV;
 
 	ops->start = timer_start;
-- 
cgit v1.2.3


From 4e85f5915dedb7c852c1e1189aa4133c87798a5e Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Tue, 8 Sep 2009 23:20:39 -0700
Subject: sparc64: Kill unnecessary cast in profile_timer_exceptions_notify().

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/oprofile/init.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/sparc/oprofile/init.c b/arch/sparc/oprofile/init.c
index 9ce34fd294c..f97cb8b6ee5 100644
--- a/arch/sparc/oprofile/init.c
+++ b/arch/sparc/oprofile/init.c
@@ -21,7 +21,7 @@
 static int profile_timer_exceptions_notify(struct notifier_block *self,
 					   unsigned long val, void *data)
 {
-	struct die_args *args = (struct die_args *)data;
+	struct die_args *args = data;
 	int ret = NOTIFY_DONE;
 
 	switch (val) {
-- 
cgit v1.2.3


From d89be56b2153ccad7e8cd9e71b5d8b686632e8c2 Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Tue, 8 Sep 2009 23:29:16 -0700
Subject: sparc64: Make touch_nmi_watchdog() actually work.

It guards it's actions on nmi_watchdog_active, but nothing ever
sets that and it's initial value is zero.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/kernel/nmi.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/sparc/kernel/nmi.c b/arch/sparc/kernel/nmi.c
index d1614e8384a..47a465fe3c3 100644
--- a/arch/sparc/kernel/nmi.c
+++ b/arch/sparc/kernel/nmi.c
@@ -31,7 +31,6 @@
  * level 14 as our IRQ off level.
  */
 
-static int nmi_watchdog_active;
 static int panic_on_timeout;
 
 /* nmi_active:
@@ -52,7 +51,7 @@ static DEFINE_PER_CPU(int, nmi_touch);
 
 void touch_nmi_watchdog(void)
 {
-	if (nmi_watchdog_active) {
+	if (atomic_read(&nmi_active)) {
 		int cpu;
 
 		for_each_present_cpu(cpu) {
-- 
cgit v1.2.3


From 733e5e4b4eb1bc1e27acbe092200154051171426 Mon Sep 17 00:00:00 2001
From: David Howells <dhowells@redhat.com>
Date: Wed, 9 Sep 2009 08:30:21 +0100
Subject: KEYS: Add missing linux/tracehook.h #inclusions

Add #inclusions of linux/tracehook.h to those arch files that had the tracehook
call for TIF_NOTIFY_RESUME added when support for that flag was added to that
arch.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
---
 arch/alpha/kernel/signal.c  | 1 +
 arch/arm/kernel/signal.c    | 1 +
 arch/avr32/kernel/signal.c  | 1 +
 arch/cris/kernel/ptrace.c   | 1 +
 arch/h8300/kernel/signal.c  | 1 +
 arch/m32r/kernel/signal.c   | 1 +
 arch/mips/kernel/signal.c   | 1 +
 arch/parisc/kernel/signal.c | 1 +
 8 files changed, 8 insertions(+)

(limited to 'arch')

diff --git a/arch/alpha/kernel/signal.c b/arch/alpha/kernel/signal.c
index d91aaa74705..0932dbb1ef8 100644
--- a/arch/alpha/kernel/signal.c
+++ b/arch/alpha/kernel/signal.c
@@ -20,6 +20,7 @@
 #include <linux/binfmts.h>
 #include <linux/bitops.h>
 #include <linux/syscalls.h>
+#include <linux/tracehook.h>
 
 #include <asm/uaccess.h>
 #include <asm/sigcontext.h>
diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c
index ea4ad3a43c8..b76fe06d92e 100644
--- a/arch/arm/kernel/signal.c
+++ b/arch/arm/kernel/signal.c
@@ -12,6 +12,7 @@
 #include <linux/personality.h>
 #include <linux/freezer.h>
 #include <linux/uaccess.h>
+#include <linux/tracehook.h>
 
 #include <asm/elf.h>
 #include <asm/cacheflush.h>
diff --git a/arch/avr32/kernel/signal.c b/arch/avr32/kernel/signal.c
index de9f7fe2aef..64f886fac2e 100644
--- a/arch/avr32/kernel/signal.c
+++ b/arch/avr32/kernel/signal.c
@@ -16,6 +16,7 @@
 #include <linux/ptrace.h>
 #include <linux/unistd.h>
 #include <linux/freezer.h>
+#include <linux/tracehook.h>
 
 #include <asm/uaccess.h>
 #include <asm/ucontext.h>
diff --git a/arch/cris/kernel/ptrace.c b/arch/cris/kernel/ptrace.c
index 32e9d5ee895..48b0f391263 100644
--- a/arch/cris/kernel/ptrace.c
+++ b/arch/cris/kernel/ptrace.c
@@ -16,6 +16,7 @@
 #include <linux/errno.h>
 #include <linux/ptrace.h>
 #include <linux/user.h>
+#include <linux/tracehook.h>
 
 #include <asm/uaccess.h>
 #include <asm/page.h>
diff --git a/arch/h8300/kernel/signal.c b/arch/h8300/kernel/signal.c
index abac3ee8c52..af842c369d2 100644
--- a/arch/h8300/kernel/signal.c
+++ b/arch/h8300/kernel/signal.c
@@ -39,6 +39,7 @@
 #include <linux/tty.h>
 #include <linux/binfmts.h>
 #include <linux/freezer.h>
+#include <linux/tracehook.h>
 
 #include <asm/setup.h>
 #include <asm/uaccess.h>
diff --git a/arch/m32r/kernel/signal.c b/arch/m32r/kernel/signal.c
index f80bac17c65..144b0f124fc 100644
--- a/arch/m32r/kernel/signal.c
+++ b/arch/m32r/kernel/signal.c
@@ -21,6 +21,7 @@
 #include <linux/stddef.h>
 #include <linux/personality.h>
 #include <linux/freezer.h>
+#include <linux/tracehook.h>
 #include <asm/cacheflush.h>
 #include <asm/ucontext.h>
 #include <asm/uaccess.h>
diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c
index c2acf31874a..6254041b942 100644
--- a/arch/mips/kernel/signal.c
+++ b/arch/mips/kernel/signal.c
@@ -21,6 +21,7 @@
 #include <linux/compiler.h>
 #include <linux/syscalls.h>
 #include <linux/uaccess.h>
+#include <linux/tracehook.h>
 
 #include <asm/abi.h>
 #include <asm/asm.h>
diff --git a/arch/parisc/kernel/signal.c b/arch/parisc/kernel/signal.c
index 5ca1c02b805..8eb3c63c407 100644
--- a/arch/parisc/kernel/signal.c
+++ b/arch/parisc/kernel/signal.c
@@ -25,6 +25,7 @@
 #include <linux/stddef.h>
 #include <linux/compat.h>
 #include <linux/elf.h>
+#include <linux/tracehook.h>
 #include <asm/ucontext.h>
 #include <asm/rt_sigframe.h>
 #include <asm/uaccess.h>
-- 
cgit v1.2.3


From a7db50405216610c8a0d62b8b400180b6f366733 Mon Sep 17 00:00:00 2001
From: Alex Chiang <achiang@hp.com>
Date: Mon, 22 Jun 2009 08:08:07 -0600
Subject: PCI: remove pcibios_scan_all_fns()

This was #define'd as 0 on all platforms, so let's get rid of it.

This change makes pci_scan_slot() slightly easier to read.

Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Tony Luck <tony.luck@intel.com>
Cc: David Howells <dhowells@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Reviewed-by: Matthew Wilcox <willy@linux.intel.com>
Acked-by: Russell King <linux@arm.linux.org.uk>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Kyle McMartin <kyle@mcmartin.ca>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 arch/alpha/include/asm/pci.h    |  1 -
 arch/arm/include/asm/pci.h      |  2 --
 arch/h8300/include/asm/pci.h    |  1 -
 arch/ia64/include/asm/pci.h     | 14 ++++++++++++--
 arch/mips/include/asm/pci.h     |  2 --
 arch/mn10300/include/asm/pci.h  | 13 ++++++++++++-
 arch/parisc/include/asm/pci.h   |  1 -
 arch/powerpc/include/asm/pci.h  |  1 -
 arch/sh/include/asm/pci.h       |  1 -
 arch/sparc/include/asm/pci_32.h |  1 -
 arch/sparc/include/asm/pci_64.h |  1 -
 arch/um/include/asm/pci.h       |  1 -
 arch/x86/include/asm/pci.h      |  1 -
 13 files changed, 24 insertions(+), 16 deletions(-)

(limited to 'arch')

diff --git a/arch/alpha/include/asm/pci.h b/arch/alpha/include/asm/pci.h
index d22ace99d13..dd8dcabf160 100644
--- a/arch/alpha/include/asm/pci.h
+++ b/arch/alpha/include/asm/pci.h
@@ -52,7 +52,6 @@ struct pci_controller {
    bus numbers.  */
 
 #define pcibios_assign_all_busses()	1
-#define pcibios_scan_all_fns(a, b)	0
 
 #define PCIBIOS_MIN_IO		alpha_mv.min_io_address
 #define PCIBIOS_MIN_MEM		alpha_mv.min_mem_address
diff --git a/arch/arm/include/asm/pci.h b/arch/arm/include/asm/pci.h
index 0abf386ba3d..226cddd2fb6 100644
--- a/arch/arm/include/asm/pci.h
+++ b/arch/arm/include/asm/pci.h
@@ -6,8 +6,6 @@
 
 #include <mach/hardware.h> /* for PCIBIOS_MIN_* */
 
-#define pcibios_scan_all_fns(a, b)	0
-
 #ifdef CONFIG_PCI_HOST_ITE8152
 /* ITE bridge requires setting latency timer to avoid early bus access
    termination by PIC bus mater devices
diff --git a/arch/h8300/include/asm/pci.h b/arch/h8300/include/asm/pci.h
index 97389b35aa3..cc9762091c0 100644
--- a/arch/h8300/include/asm/pci.h
+++ b/arch/h8300/include/asm/pci.h
@@ -8,7 +8,6 @@
  */
 
 #define pcibios_assign_all_busses()	0
-#define pcibios_scan_all_fns(a, b)	0
 
 static inline void pcibios_set_master(struct pci_dev *dev)
 {
diff --git a/arch/ia64/include/asm/pci.h b/arch/ia64/include/asm/pci.h
index fcfca56bb85..55281aabe5f 100644
--- a/arch/ia64/include/asm/pci.h
+++ b/arch/ia64/include/asm/pci.h
@@ -17,7 +17,6 @@
  * loader.
  */
 #define pcibios_assign_all_busses()     0
-#define pcibios_scan_all_fns(a, b)	0
 
 #define PCIBIOS_MIN_IO		0x1000
 #define PCIBIOS_MIN_MEM		0x10000000
@@ -135,7 +134,18 @@ extern void pcibios_resource_to_bus(struct pci_dev *dev,
 extern void pcibios_bus_to_resource(struct pci_dev *dev,
 		struct resource *res, struct pci_bus_region *region);
 
-#define pcibios_scan_all_fns(a, b)	0
+static inline struct resource *
+pcibios_select_root(struct pci_dev *pdev, struct resource *res)
+{
+	struct resource *root = NULL;
+
+	if (res->flags & IORESOURCE_IO)
+		root = &ioport_resource;
+	if (res->flags & IORESOURCE_MEM)
+		root = &iomem_resource;
+
+	return root;
+}
 
 #define HAVE_ARCH_PCI_GET_LEGACY_IDE_IRQ
 static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
diff --git a/arch/mips/include/asm/pci.h b/arch/mips/include/asm/pci.h
index a68d111e55e..5ebf82572ec 100644
--- a/arch/mips/include/asm/pci.h
+++ b/arch/mips/include/asm/pci.h
@@ -65,8 +65,6 @@ extern int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
 
 extern unsigned int pcibios_assign_all_busses(void);
 
-#define pcibios_scan_all_fns(a, b)	0
-
 extern unsigned long PCIBIOS_MIN_IO;
 extern unsigned long PCIBIOS_MIN_MEM;
 
diff --git a/arch/mn10300/include/asm/pci.h b/arch/mn10300/include/asm/pci.h
index 19aecc90f7a..6095a28561d 100644
--- a/arch/mn10300/include/asm/pci.h
+++ b/arch/mn10300/include/asm/pci.h
@@ -101,7 +101,18 @@ extern void pcibios_bus_to_resource(struct pci_dev *dev,
 				    struct resource *res,
 				    struct pci_bus_region *region);
 
-#define pcibios_scan_all_fns(a, b)	0
+static inline struct resource *
+pcibios_select_root(struct pci_dev *pdev, struct resource *res)
+{
+	struct resource *root = NULL;
+
+	if (res->flags & IORESOURCE_IO)
+		root = &ioport_resource;
+	if (res->flags & IORESOURCE_MEM)
+		root = &iomem_resource;
+
+	return root;
+}
 
 static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
 {
diff --git a/arch/parisc/include/asm/pci.h b/arch/parisc/include/asm/pci.h
index 7d842d699df..64c7aa590ae 100644
--- a/arch/parisc/include/asm/pci.h
+++ b/arch/parisc/include/asm/pci.h
@@ -233,7 +233,6 @@ static inline void pcibios_register_hba(struct pci_hba_data *x)
  *   rp7420/8420 boxes and then revisit this issue.
  */
 #define pcibios_assign_all_busses()     (1)
-#define pcibios_scan_all_fns(a, b)	(0)
 
 #define PCIBIOS_MIN_IO          0x10
 #define PCIBIOS_MIN_MEM         0x1000 /* NBPG - but pci/setup-res.c dies */
diff --git a/arch/powerpc/include/asm/pci.h b/arch/powerpc/include/asm/pci.h
index d9483c504d2..36057c821ff 100644
--- a/arch/powerpc/include/asm/pci.h
+++ b/arch/powerpc/include/asm/pci.h
@@ -40,7 +40,6 @@ struct pci_dev;
  */
 #define pcibios_assign_all_busses() \
 	(ppc_pci_has_flag(PPC_PCI_REASSIGN_ALL_BUS))
-#define pcibios_scan_all_fns(a, b)	0
 
 static inline void pcibios_set_master(struct pci_dev *dev)
 {
diff --git a/arch/sh/include/asm/pci.h b/arch/sh/include/asm/pci.h
index d3633f513eb..4163950cd1c 100644
--- a/arch/sh/include/asm/pci.h
+++ b/arch/sh/include/asm/pci.h
@@ -10,7 +10,6 @@
    or architectures with incomplete PCI setup by the loader */
 
 #define pcibios_assign_all_busses()	1
-#define pcibios_scan_all_fns(a, b)	0
 
 /*
  * A board can define one or more PCI channels that represent built-in (or
diff --git a/arch/sparc/include/asm/pci_32.h b/arch/sparc/include/asm/pci_32.h
index b41c4c19815..810d9248e23 100644
--- a/arch/sparc/include/asm/pci_32.h
+++ b/arch/sparc/include/asm/pci_32.h
@@ -10,7 +10,6 @@
  * or architectures with incomplete PCI setup by the loader.
  */
 #define pcibios_assign_all_busses()	0
-#define pcibios_scan_all_fns(a, b)	0
 
 #define PCIBIOS_MIN_IO		0UL
 #define PCIBIOS_MIN_MEM		0UL
diff --git a/arch/sparc/include/asm/pci_64.h b/arch/sparc/include/asm/pci_64.h
index 7a1e3566e59..a3297088828 100644
--- a/arch/sparc/include/asm/pci_64.h
+++ b/arch/sparc/include/asm/pci_64.h
@@ -10,7 +10,6 @@
  * or architectures with incomplete PCI setup by the loader.
  */
 #define pcibios_assign_all_busses()	0
-#define pcibios_scan_all_fns(a, b)	0
 
 #define PCIBIOS_MIN_IO		0UL
 #define PCIBIOS_MIN_MEM		0UL
diff --git a/arch/um/include/asm/pci.h b/arch/um/include/asm/pci.h
index 59923199cdc..b44cf59ede1 100644
--- a/arch/um/include/asm/pci.h
+++ b/arch/um/include/asm/pci.h
@@ -2,6 +2,5 @@
 #define __UM_PCI_H
 
 #define PCI_DMA_BUS_IS_PHYS     (1)
-#define pcibios_scan_all_fns(a, b)	0
 
 #endif
diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h
index 1ff685ca221..f76a162c082 100644
--- a/arch/x86/include/asm/pci.h
+++ b/arch/x86/include/asm/pci.h
@@ -48,7 +48,6 @@ extern unsigned int pcibios_assign_all_busses(void);
 #else
 #define pcibios_assign_all_busses()	0
 #endif
-#define pcibios_scan_all_fns(a, b)	0
 
 extern unsigned long pci_mem_start;
 #define PCIBIOS_MIN_IO		0x1000
-- 
cgit v1.2.3


From eae91c0215d99f7727b66e2928fb73bf86bc9668 Mon Sep 17 00:00:00 2001
From: Matthew Wilcox <willy@linux.intel.com>
Date: Fri, 19 Jun 2009 09:36:13 -0400
Subject: frv/PCI: Use pci_claim_resource

Instead of open-coding pci_find_parent_resource and request_resource,
just call pci_claim_resource.

Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 arch/frv/mb93090-mb00/pci-frv.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/frv/mb93090-mb00/pci-frv.c b/arch/frv/mb93090-mb00/pci-frv.c
index 43d67534c71..566bdeb499d 100644
--- a/arch/frv/mb93090-mb00/pci-frv.c
+++ b/arch/frv/mb93090-mb00/pci-frv.c
@@ -86,7 +86,7 @@ static void __init pcibios_allocate_bus_resources(struct list_head *bus_list)
 	struct pci_bus *bus;
 	struct pci_dev *dev;
 	int idx;
-	struct resource *r, *pr;
+	struct resource *r;
 
 	/* Depth-First Search on bus tree */
 	for (ln=bus_list->next; ln != bus_list; ln=ln->next) {
@@ -96,8 +96,7 @@ static void __init pcibios_allocate_bus_resources(struct list_head *bus_list)
 				r = &dev->resource[idx];
 				if (!r->start)
 					continue;
-				pr = pci_find_parent_resource(dev, r);
-				if (!pr || request_resource(pr, r) < 0)
+				if (pci_claim_resource(dev, idx) < 0)
 					printk(KERN_ERR "PCI: Cannot allocate resource region %d of bridge %s\n", idx, pci_name(dev));
 			}
 		}
@@ -110,7 +109,7 @@ static void __init pcibios_allocate_resources(int pass)
 	struct pci_dev *dev = NULL;
 	int idx, disabled;
 	u16 command;
-	struct resource *r, *pr;
+	struct resource *r;
 
 	for_each_pci_dev(dev) {
 		pci_read_config_word(dev, PCI_COMMAND, &command);
@@ -127,8 +126,7 @@ static void __init pcibios_allocate_resources(int pass)
 			if (pass == disabled) {
 				DBG("PCI: Resource %08lx-%08lx (f=%lx, d=%d, p=%d)\n",
 				    r->start, r->end, r->flags, disabled, pass);
-				pr = pci_find_parent_resource(dev, r);
-				if (!pr || request_resource(pr, r) < 0) {
+				if (pci_claim_resource(dev, idx) < 0) {
 					printk(KERN_ERR "PCI: Cannot allocate resource region %d of device %s\n", idx, pci_name(dev));
 					/* We'll assign a new address later */
 					r->end -= r->start;
-- 
cgit v1.2.3


From 2547089ca2db132e307ef68848ba029a8ec2f341 Mon Sep 17 00:00:00 2001
From: Jesse Barnes <jbarnes@virtuousgeek.org>
Date: Fri, 10 Jul 2009 14:04:30 -0700
Subject: x86/PCI: initialize PCI bus node numbers early

The current mp_bus_to_node array is initialized only by AMD specific
code, since AMD platforms have registers that can be used for
determining mode numbers.  On new Intel platforms it's necessary to
initialize this array as well though, otherwise all PCI node numbers
will be 0, when in fact they should be -1 (indicating that I/O isn't
tied to any particular node).

So move the mp_bus_to_node code into the common PCI code, and
initialize it early with a default value of -1.  This may be overridden
later by arch code (e.g. the AMD code).

With this change, PCI consistent memory and other node specific
allocations (e.g. skbuff allocs) should occur on the "current" node.
If, for performance reasons, applications want to be bound to specific
nodes, they should open their devices only after being pinned to the
CPU where they'll run, for maximum locality.

Acked-by: Yinghai Lu <yinghai@kernel.org>
Tested-by: Jesse Brandeburg <jesse.brandeburg@gmail.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 arch/x86/pci/amd_bus.c | 64 +---------------------------------------------
 arch/x86/pci/common.c  | 69 ++++++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 70 insertions(+), 63 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/pci/amd_bus.c b/arch/x86/pci/amd_bus.c
index 3ffa10df20b..572ee9782f2 100644
--- a/arch/x86/pci/amd_bus.c
+++ b/arch/x86/pci/amd_bus.c
@@ -15,63 +15,6 @@
  * also get peer root bus resource for io,mmio
  */
 
-#ifdef CONFIG_NUMA
-
-#define BUS_NR 256
-
-#ifdef CONFIG_X86_64
-
-static int mp_bus_to_node[BUS_NR];
-
-void set_mp_bus_to_node(int busnum, int node)
-{
-	if (busnum >= 0 &&  busnum < BUS_NR)
-		mp_bus_to_node[busnum] = node;
-}
-
-int get_mp_bus_to_node(int busnum)
-{
-	int node = -1;
-
-	if (busnum < 0 || busnum > (BUS_NR - 1))
-		return node;
-
-	node = mp_bus_to_node[busnum];
-
-	/*
-	 * let numa_node_id to decide it later in dma_alloc_pages
-	 * if there is no ram on that node
-	 */
-	if (node != -1 && !node_online(node))
-		node = -1;
-
-	return node;
-}
-
-#else /* CONFIG_X86_32 */
-
-static unsigned char mp_bus_to_node[BUS_NR];
-
-void set_mp_bus_to_node(int busnum, int node)
-{
-	if (busnum >= 0 &&  busnum < BUS_NR)
-	mp_bus_to_node[busnum] = (unsigned char) node;
-}
-
-int get_mp_bus_to_node(int busnum)
-{
-	int node;
-
-	if (busnum < 0 || busnum > (BUS_NR - 1))
-		return 0;
-	node = mp_bus_to_node[busnum];
-	return node;
-}
-
-#endif /* CONFIG_X86_32 */
-
-#endif /* CONFIG_NUMA */
-
 #ifdef CONFIG_X86_64
 
 /*
@@ -301,11 +244,6 @@ static int __init early_fill_mp_bus_info(void)
 	u64 val;
 	u32 address;
 
-#ifdef CONFIG_NUMA
-	for (i = 0; i < BUS_NR; i++)
-		mp_bus_to_node[i] = -1;
-#endif
-
 	if (!early_pci_allowed())
 		return -1;
 
@@ -346,7 +284,7 @@ static int __init early_fill_mp_bus_info(void)
 		node = (reg >> 4) & 0x07;
 #ifdef CONFIG_NUMA
 		for (j = min_bus; j <= max_bus; j++)
-			mp_bus_to_node[j] = (unsigned char) node;
+			set_mp_bus_to_node(j, node);
 #endif
 		link = (reg >> 8) & 0x03;
 
diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c
index 2202b6257b8..5db96d4304d 100644
--- a/arch/x86/pci/common.c
+++ b/arch/x86/pci/common.c
@@ -600,3 +600,72 @@ struct pci_bus * __devinit pci_scan_bus_with_sysdata(int busno)
 {
 	return pci_scan_bus_on_node(busno, &pci_root_ops, -1);
 }
+
+/*
+ * NUMA info for PCI busses
+ *
+ * Early arch code is responsible for filling in reasonable values here.
+ * A node id of "-1" means "use current node".  In other words, if a bus
+ * has a -1 node id, it's not tightly coupled to any particular chunk
+ * of memory (as is the case on some Nehalem systems).
+ */
+#ifdef CONFIG_NUMA
+
+#define BUS_NR 256
+
+#ifdef CONFIG_X86_64
+
+static int mp_bus_to_node[BUS_NR] = {
+	[0 ... BUS_NR - 1] = -1
+};
+
+void set_mp_bus_to_node(int busnum, int node)
+{
+	if (busnum >= 0 &&  busnum < BUS_NR)
+		mp_bus_to_node[busnum] = node;
+}
+
+int get_mp_bus_to_node(int busnum)
+{
+	int node = -1;
+
+	if (busnum < 0 || busnum > (BUS_NR - 1))
+		return node;
+
+	node = mp_bus_to_node[busnum];
+
+	/*
+	 * let numa_node_id to decide it later in dma_alloc_pages
+	 * if there is no ram on that node
+	 */
+	if (node != -1 && !node_online(node))
+		node = -1;
+
+	return node;
+}
+
+#else /* CONFIG_X86_32 */
+
+static unsigned char mp_bus_to_node[BUS_NR] = {
+	[0 ... BUS_NR - 1] = -1
+};
+
+void set_mp_bus_to_node(int busnum, int node)
+{
+	if (busnum >= 0 &&  busnum < BUS_NR)
+	mp_bus_to_node[busnum] = (unsigned char) node;
+}
+
+int get_mp_bus_to_node(int busnum)
+{
+	int node;
+
+	if (busnum < 0 || busnum > (BUS_NR - 1))
+		return 0;
+	node = mp_bus_to_node[busnum];
+	return node;
+}
+
+#endif /* CONFIG_X86_32 */
+
+#endif /* CONFIG_NUMA */
-- 
cgit v1.2.3


From 80286879c209034245f0a28a2171d2ec23b7481c Mon Sep 17 00:00:00 2001
From: Alex Williamson <alex.williamson@hp.com>
Date: Thu, 30 Jul 2009 16:15:18 -0600
Subject: PCI iommu: iommu=pt is a valid early param

This avoids a "Malformed early option 'iommu'" on boot when trying
to use pass-through mode.

Signed-off-by: Alex Williamson <alex.williamson@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 arch/x86/kernel/pci-dma.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c
index 1a041bcf506..ae13e34f724 100644
--- a/arch/x86/kernel/pci-dma.c
+++ b/arch/x86/kernel/pci-dma.c
@@ -212,10 +212,8 @@ static __init int iommu_setup(char *p)
 		if (!strncmp(p, "soft", 4))
 			swiotlb = 1;
 #endif
-		if (!strncmp(p, "pt", 2)) {
+		if (!strncmp(p, "pt", 2))
 			iommu_pass_through = 1;
-			return 1;
-		}
 
 		gart_parse_options(p);
 
-- 
cgit v1.2.3


From 6e19314cc98ab9ccc22c30d1c414984ac6de5ce2 Mon Sep 17 00:00:00 2001
From: Mike Mason <mmlnx@us.ibm.com>
Date: Thu, 30 Jul 2009 15:42:39 -0700
Subject: PCI/powerpc: support PCIe fundamental reset

By default, the EEH framework on powerpc does what's known as a "hot
reset" during recovery of a PCI Express device.  We've found a case
where the device needs a "fundamental reset" to recover properly.  The
current PCI error recovery and EEH frameworks do not support this
distinction.

The attached patch makes changes to EEH to utilize the new bit field.

Signed-off-by: Mike Mason <mmlnx@us.ibm.com>
Signed-off-by: Richard Lary <rlary@us.ibm.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 arch/powerpc/kernel/pci_64.c         |  1 +
 arch/powerpc/platforms/pseries/eeh.c | 10 +++++++++-
 2 files changed, 10 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c
index 9e8902fa14c..b6e9ea45a71 100644
--- a/arch/powerpc/kernel/pci_64.c
+++ b/arch/powerpc/kernel/pci_64.c
@@ -143,6 +143,7 @@ struct pci_dev *of_create_pci_dev(struct device_node *node,
 	dev->dev.bus = &pci_bus_type;
 	dev->devfn = devfn;
 	dev->multifunction = 0;		/* maybe a lie? */
+	dev->needs_freset = 0;       /* pcie fundamental reset required */
 
 	dev->vendor = get_int_prop(node, "vendor-id", 0xffff);
 	dev->device = get_int_prop(node, "device-id", 0xffff);
diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c
index 989d6462c15..ccd8dd03b8c 100644
--- a/arch/powerpc/platforms/pseries/eeh.c
+++ b/arch/powerpc/platforms/pseries/eeh.c
@@ -744,7 +744,15 @@ int pcibios_set_pcie_reset_state(struct pci_dev *dev, enum pcie_reset_state stat
 
 static void __rtas_set_slot_reset(struct pci_dn *pdn)
 {
-	rtas_pci_slot_reset (pdn, 1);
+	struct pci_dev *dev = pdn->pcidev;
+
+	/* Determine type of EEH reset required by device,
+	 * default hot reset or fundamental reset
+	 */
+	if (dev->needs_freset)
+		rtas_pci_slot_reset(pdn, 3);
+	else
+		rtas_pci_slot_reset(pdn, 1);
 
 	/* The PCI bus requires that the reset be held high for at least
 	 * a 100 milliseconds. We wait a bit longer 'just in case'.  */
-- 
cgit v1.2.3


From fa526d0d641b5365676a1fb821ce359e217c9b85 Mon Sep 17 00:00:00 2001
From: Jack Steiner <steiner@sgi.com>
Date: Thu, 3 Sep 2009 12:56:02 -0500
Subject: x86, pat: Fix cacheflush address in change_page_attr_set_clr()

Fix address passed to cpa_flush_range() when changing page
attributes from WB to UC. The address (*addr) is
modified by __change_page_attr_set_clr(). The result is that
the pages being flushed start at the _end_ of the changed range
instead of the beginning.

This should be considered for 2.6.30-stable and 2.6.31-stable.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Acked-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Stable team <stable@kernel.org>
---
 arch/x86/mm/pageattr.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index 7e600c1962d..e245775ec85 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -822,6 +822,7 @@ static int change_page_attr_set_clr(unsigned long *addr, int numpages,
 {
 	struct cpa_data cpa;
 	int ret, cache, checkalias;
+	unsigned long baddr = 0;
 
 	/*
 	 * Check, if we are requested to change a not supported
@@ -853,6 +854,11 @@ static int change_page_attr_set_clr(unsigned long *addr, int numpages,
 			 */
 			WARN_ON_ONCE(1);
 		}
+		/*
+		 * Save address for cache flush. *addr is modified in the call
+		 * to __change_page_attr_set_clr() below.
+		 */
+		baddr = *addr;
 	}
 
 	/* Must avoid aliasing mappings in the highmem code */
@@ -900,7 +906,7 @@ static int change_page_attr_set_clr(unsigned long *addr, int numpages,
 			cpa_flush_array(addr, numpages, cache,
 					cpa.flags, pages);
 		} else
-			cpa_flush_range(*addr, numpages, cache);
+			cpa_flush_range(baddr, numpages, cache);
 	} else
 		cpa_flush_all(cache);
 
-- 
cgit v1.2.3


From 748df9a4c65625c386674c9b54dde73de6cc5af5 Mon Sep 17 00:00:00 2001
From: Jiri Slaby <jirislaby@gmail.com>
Date: Tue, 8 Sep 2009 12:16:18 +0200
Subject: x86/PCI: pci quirks, fix pci refcounting

Stanse found a pci reference leak in quirk_amd_nb_node.
Instead of putting nb_ht, there is a put of dev passed as
an argument.

http://stanse.fi.muni.cz/

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 arch/x86/kernel/quirks.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/quirks.c b/arch/x86/kernel/quirks.c
index af71d06624b..6c3b2c6fd77 100644
--- a/arch/x86/kernel/quirks.c
+++ b/arch/x86/kernel/quirks.c
@@ -508,7 +508,7 @@ static void __init quirk_amd_nb_node(struct pci_dev *dev)
 
 	pci_read_config_dword(nb_ht, 0x60, &val);
 	set_dev_node(&dev->dev, val & 7);
-	pci_dev_put(dev);
+	pci_dev_put(nb_ht);
 }
 
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB,
-- 
cgit v1.2.3


From 577eebeae34d340685d8985dfdb7dfe337c511e8 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Thu, 27 Aug 2009 12:46:35 -0700
Subject: xen: make -fstack-protector work under Xen

-fstack-protector uses a special per-cpu "stack canary" value.
gcc generates special code in each function to test the canary to make
sure that the function's stack hasn't been overrun.

On x86-64, this is simply an offset of %gs, which is the usual per-cpu
base segment register, so setting it up simply requires loading %gs's
base as normal.

On i386, the stack protector segment is %gs (rather than the usual kernel
percpu %fs segment register).  This requires setting up the full kernel
GDT and then loading %gs accordingly.  We also need to make sure %gs is
initialized when bringing up secondary cpus too.

To keep things consistent, we do the full GDT/segment register setup on
both architectures.

Because we need to avoid -fstack-protected code before setting up the GDT
and because there's no way to disable it on a per-function basis, several
files need to have stack-protector inhibited.

[ Impact: allow Xen booting with stack-protector enabled ]

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/mm/Makefile     |   4 ++
 arch/x86/xen/Makefile    |   2 +
 arch/x86/xen/enlighten.c | 131 ++++++++++++++++++++++++++++++++++++++++-------
 arch/x86/xen/smp.c       |   1 +
 4 files changed, 119 insertions(+), 19 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/mm/Makefile b/arch/x86/mm/Makefile
index eefdeee8a87..72bb3a26c73 100644
--- a/arch/x86/mm/Makefile
+++ b/arch/x86/mm/Makefile
@@ -1,6 +1,10 @@
 obj-y	:=  init.o init_$(BITS).o fault.o ioremap.o extable.o pageattr.o mmap.o \
 	    pat.o pgtable.o gup.o
 
+# Make sure __phys_addr has no stackprotector
+nostackp := $(call cc-option, -fno-stack-protector)
+CFLAGS_ioremap.o		:= $(nostackp)
+
 obj-$(CONFIG_SMP)		+= tlb.o
 
 obj-$(CONFIG_X86_32)		+= pgtable_32.o iomap_32.o
diff --git a/arch/x86/xen/Makefile b/arch/x86/xen/Makefile
index 7410640db17..3bb4fc21f4f 100644
--- a/arch/x86/xen/Makefile
+++ b/arch/x86/xen/Makefile
@@ -8,6 +8,7 @@ endif
 # Make sure early boot has no stackprotector
 nostackp := $(call cc-option, -fno-stack-protector)
 CFLAGS_enlighten.o		:= $(nostackp)
+CFLAGS_mmu.o			:= $(nostackp)
 
 obj-y		:= enlighten.o setup.o multicalls.o mmu.o irq.o \
 			time.o xen-asm.o xen-asm_$(BITS).o \
@@ -16,3 +17,4 @@ obj-y		:= enlighten.o setup.o multicalls.o mmu.o irq.o \
 obj-$(CONFIG_SMP)		+= smp.o
 obj-$(CONFIG_PARAVIRT_SPINLOCKS)+= spinlock.o
 obj-$(CONFIG_XEN_DEBUG_FS)	+= debugfs.o
+
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index eb33aaa8415..76143136dea 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -51,6 +51,7 @@
 #include <asm/pgtable.h>
 #include <asm/tlbflush.h>
 #include <asm/reboot.h>
+#include <asm/stackprotector.h>
 
 #include "xen-ops.h"
 #include "mmu.h"
@@ -330,18 +331,28 @@ static void xen_load_gdt(const struct desc_ptr *dtr)
 	unsigned long frames[pages];
 	int f;
 
-	/* A GDT can be up to 64k in size, which corresponds to 8192
-	   8-byte entries, or 16 4k pages.. */
+	/*
+	 * A GDT can be up to 64k in size, which corresponds to 8192
+	 * 8-byte entries, or 16 4k pages..
+	 */
 
 	BUG_ON(size > 65536);
 	BUG_ON(va & ~PAGE_MASK);
 
 	for (f = 0; va < dtr->address + size; va += PAGE_SIZE, f++) {
 		int level;
-		pte_t *ptep = lookup_address(va, &level);
+		pte_t *ptep;
 		unsigned long pfn, mfn;
 		void *virt;
 
+		/*
+		 * The GDT is per-cpu and is in the percpu data area.
+		 * That can be virtually mapped, so we need to do a
+		 * page-walk to get the underlying MFN for the
+		 * hypercall.  The page can also be in the kernel's
+		 * linear range, so we need to RO that mapping too.
+		 */
+		ptep = lookup_address(va, &level);
 		BUG_ON(ptep == NULL);
 
 		pfn = pte_pfn(*ptep);
@@ -358,6 +369,44 @@ static void xen_load_gdt(const struct desc_ptr *dtr)
 		BUG();
 }
 
+/*
+ * load_gdt for early boot, when the gdt is only mapped once
+ */
+static __init void xen_load_gdt_boot(const struct desc_ptr *dtr)
+{
+	unsigned long va = dtr->address;
+	unsigned int size = dtr->size + 1;
+	unsigned pages = (size + PAGE_SIZE - 1) / PAGE_SIZE;
+	unsigned long frames[pages];
+	int f;
+
+	/*
+	 * A GDT can be up to 64k in size, which corresponds to 8192
+	 * 8-byte entries, or 16 4k pages..
+	 */
+
+	BUG_ON(size > 65536);
+	BUG_ON(va & ~PAGE_MASK);
+
+	for (f = 0; va < dtr->address + size; va += PAGE_SIZE, f++) {
+		pte_t pte;
+		unsigned long pfn, mfn;
+
+		pfn = virt_to_pfn(va);
+		mfn = pfn_to_mfn(pfn);
+
+		pte = pfn_pte(pfn, PAGE_KERNEL_RO);
+
+		if (HYPERVISOR_update_va_mapping((unsigned long)va, pte, 0))
+			BUG();
+
+		frames[f] = mfn;
+	}
+
+	if (HYPERVISOR_set_gdt(frames, size / sizeof(struct desc_struct)))
+		BUG();
+}
+
 static void load_TLS_descriptor(struct thread_struct *t,
 				unsigned int cpu, unsigned int i)
 {
@@ -581,6 +630,29 @@ static void xen_write_gdt_entry(struct desc_struct *dt, int entry,
 	preempt_enable();
 }
 
+/*
+ * Version of write_gdt_entry for use at early boot-time needed to
+ * update an entry as simply as possible.
+ */
+static __init void xen_write_gdt_entry_boot(struct desc_struct *dt, int entry,
+					    const void *desc, int type)
+{
+	switch (type) {
+	case DESC_LDT:
+	case DESC_TSS:
+		/* ignore */
+		break;
+
+	default: {
+		xmaddr_t maddr = virt_to_machine(&dt[entry]);
+
+		if (HYPERVISOR_update_descriptor(maddr.maddr, *(u64 *)desc))
+			dt[entry] = *(struct desc_struct *)desc;
+	}
+
+	}
+}
+
 static void xen_load_sp0(struct tss_struct *tss,
 			 struct thread_struct *thread)
 {
@@ -965,6 +1037,23 @@ static const struct machine_ops __initdata xen_machine_ops = {
 	.emergency_restart = xen_emergency_restart,
 };
 
+/*
+ * Set up the GDT and segment registers for -fstack-protector.  Until
+ * we do this, we have to be careful not to call any stack-protected
+ * function, which is most of the kernel.
+ */
+static void __init xen_setup_stackprotector(void)
+{
+	pv_cpu_ops.write_gdt_entry = xen_write_gdt_entry_boot;
+	pv_cpu_ops.load_gdt = xen_load_gdt_boot;
+
+	setup_stack_canary_segment(0);
+	switch_to_new_gdt(0);
+
+	pv_cpu_ops.write_gdt_entry = xen_write_gdt_entry;
+	pv_cpu_ops.load_gdt = xen_load_gdt;
+}
+
 /* First C function to be called on Xen boot */
 asmlinkage void __init xen_start_kernel(void)
 {
@@ -983,13 +1072,28 @@ asmlinkage void __init xen_start_kernel(void)
 	pv_apic_ops = xen_apic_ops;
 	pv_mmu_ops = xen_mmu_ops;
 
-#ifdef CONFIG_X86_64
 	/*
-	 * Setup percpu state.  We only need to do this for 64-bit
-	 * because 32-bit already has %fs set properly.
+	 * Set up some pagetable state before starting to set any ptes.
 	 */
-	load_percpu_segment(0);
-#endif
+
+	/* Prevent unwanted bits from being set in PTEs. */
+	__supported_pte_mask &= ~_PAGE_GLOBAL;
+	if (!xen_initial_domain())
+		__supported_pte_mask &= ~(_PAGE_PWT | _PAGE_PCD);
+
+	__supported_pte_mask |= _PAGE_IOMAP;
+
+	xen_setup_features();
+
+	/* Get mfn list */
+	if (!xen_feature(XENFEAT_auto_translated_physmap))
+		xen_build_dynamic_phys_to_machine();
+
+	/*
+	 * Set up kernel GDT and segment registers, mainly so that
+	 * -fstack-protector code can be executed.
+	 */
+	xen_setup_stackprotector();
 
 	xen_init_irq_ops();
 	xen_init_cpuid_mask();
@@ -1001,8 +1105,6 @@ asmlinkage void __init xen_start_kernel(void)
 	set_xen_basic_apic_ops();
 #endif
 
-	xen_setup_features();
-
 	if (xen_feature(XENFEAT_mmu_pt_update_preserve_ad)) {
 		pv_mmu_ops.ptep_modify_prot_start = xen_ptep_modify_prot_start;
 		pv_mmu_ops.ptep_modify_prot_commit = xen_ptep_modify_prot_commit;
@@ -1019,17 +1121,8 @@ asmlinkage void __init xen_start_kernel(void)
 
 	xen_smp_init();
 
-	/* Get mfn list */
-	if (!xen_feature(XENFEAT_auto_translated_physmap))
-		xen_build_dynamic_phys_to_machine();
-
 	pgd = (pgd_t *)xen_start_info->pt_base;
 
-	/* Prevent unwanted bits from being set in PTEs. */
-	__supported_pte_mask &= ~_PAGE_GLOBAL;
-	if (!xen_initial_domain())
-		__supported_pte_mask &= ~(_PAGE_PWT | _PAGE_PCD);
-
 #ifdef CONFIG_X86_64
 	/* Work out if we support NX */
 	check_efer();
diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c
index 429834ec168..fe03eeed7b4 100644
--- a/arch/x86/xen/smp.c
+++ b/arch/x86/xen/smp.c
@@ -236,6 +236,7 @@ cpu_initialize_context(unsigned int cpu, struct task_struct *idle)
 	ctxt->user_regs.ss = __KERNEL_DS;
 #ifdef CONFIG_X86_32
 	ctxt->user_regs.fs = __KERNEL_PERCPU;
+	ctxt->user_regs.gs = __KERNEL_STACK_CANARY;
 #else
 	ctxt->gs_base_kernel = per_cpu_offset(cpu);
 #endif
-- 
cgit v1.2.3


From 4d576b57b50a92801e6493e76e5243d6cff193d2 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Wed, 9 Sep 2009 12:33:51 -0700
Subject: xen: only enable interrupts while actually blocking for spinlock

Where possible we enable interrupts while waiting for a spinlock to
become free, in order to reduce big latency spikes in interrupt handling.

However, at present if we manage to pick up the spinlock just before
blocking, we'll end up holding the lock with interrupts enabled for a
while.  This will cause a deadlock if we recieve an interrupt in that
window, and the interrupt handler tries to take the lock too.

Solve this by shrinking the interrupt-enabled region to just around the
blocking call.

[ Impact: avoid race/deadlock when using Xen PV spinlocks ]

Reported-by: "Yang, Xiaowei" <xiaowei.yang@intel.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/xen/spinlock.c | 19 +++++++++++--------
 1 file changed, 11 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/xen/spinlock.c b/arch/x86/xen/spinlock.c
index 5601506f2dd..2f91e565192 100644
--- a/arch/x86/xen/spinlock.c
+++ b/arch/x86/xen/spinlock.c
@@ -187,7 +187,6 @@ static noinline int xen_spin_lock_slow(struct raw_spinlock *lock, bool irq_enabl
 	struct xen_spinlock *prev;
 	int irq = __get_cpu_var(lock_kicker_irq);
 	int ret;
-	unsigned long flags;
 	u64 start;
 
 	/* If kicker interrupts not initialized yet, just spin */
@@ -199,16 +198,12 @@ static noinline int xen_spin_lock_slow(struct raw_spinlock *lock, bool irq_enabl
 	/* announce we're spinning */
 	prev = spinning_lock(xl);
 
-	flags = __raw_local_save_flags();
-	if (irq_enable) {
-		ADD_STATS(taken_slow_irqenable, 1);
-		raw_local_irq_enable();
-	}
-
 	ADD_STATS(taken_slow, 1);
 	ADD_STATS(taken_slow_nested, prev != NULL);
 
 	do {
+		unsigned long flags;
+
 		/* clear pending */
 		xen_clear_irq_pending(irq);
 
@@ -228,6 +223,12 @@ static noinline int xen_spin_lock_slow(struct raw_spinlock *lock, bool irq_enabl
 			goto out;
 		}
 
+		flags = __raw_local_save_flags();
+		if (irq_enable) {
+			ADD_STATS(taken_slow_irqenable, 1);
+			raw_local_irq_enable();
+		}
+
 		/*
 		 * Block until irq becomes pending.  If we're
 		 * interrupted at this point (after the trylock but
@@ -238,13 +239,15 @@ static noinline int xen_spin_lock_slow(struct raw_spinlock *lock, bool irq_enabl
 		 * pending.
 		 */
 		xen_poll_irq(irq);
+
+		raw_local_irq_restore(flags);
+
 		ADD_STATS(taken_slow_spurious, !xen_test_irq_pending(irq));
 	} while (!xen_test_irq_pending(irq)); /* check for spurious wakeups */
 
 	kstat_incr_irqs_this_cpu(irq, irq_to_desc(irq));
 
 out:
-	raw_local_irq_restore(flags);
 	unspinning_lock(xl, prev);
 	spin_time_accum_blocked(start);
 
-- 
cgit v1.2.3


From 2496afbf1e50c70f80992656bcb730c8583ddac3 Mon Sep 17 00:00:00 2001
From: Yang Xiaowei <xiaowei.yang@intel.com>
Date: Wed, 9 Sep 2009 12:44:52 -0700
Subject: xen: use stronger barrier after unlocking lock

We need to have a stronger barrier between releasing the lock and
checking for any waiting spinners.  A compiler barrier is not sufficient
because the CPU's ordering rules do not prevent the read xl->spinners
from happening before the unlock assignment, as they are different
memory locations.

We need to have an explicit barrier to enforce the write-read ordering
to different memory locations.

Because of it, I can't bring up > 4 HVM guests on one SMP machine.

[ Code and commit comments expanded -J ]

[ Impact: avoid deadlock when using Xen PV spinlocks ]

Signed-off-by: Yang Xiaowei <xiaowei.yang@intel.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/xen/spinlock.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/xen/spinlock.c b/arch/x86/xen/spinlock.c
index 2f91e565192..36a5141108d 100644
--- a/arch/x86/xen/spinlock.c
+++ b/arch/x86/xen/spinlock.c
@@ -326,8 +326,13 @@ static void xen_spin_unlock(struct raw_spinlock *lock)
 	smp_wmb();		/* make sure no writes get moved after unlock */
 	xl->lock = 0;		/* release lock */
 
-	/* make sure unlock happens before kick */
-	barrier();
+	/*
+	 * Make sure unlock happens before checking for waiting
+	 * spinners.  We need a strong barrier to enforce the
+	 * write-read ordering to different memory locations, as the
+	 * CPU makes no implied guarantees about their ordering.
+	 */
+	mb();
 
 	if (unlikely(xl->spinners))
 		xen_spin_unlock_slow(xl);
-- 
cgit v1.2.3


From ae0bb3e011fec51fa67073d8e23d8ffeb36185d1 Mon Sep 17 00:00:00 2001
From: Gleb Natapov <gleb@redhat.com>
Date: Tue, 19 May 2009 11:07:10 +0300
Subject: KVM: VMX: Properly handle software interrupt re-injection in real
 mode

When reinjecting a software interrupt or exception, use the correct
instruction length provided by the hardware instead of a hardcoded 1.

Fixes problems running the suse 9.1 livecd boot loader.

Problem introduced by commit f0a3602c20 ("KVM: Move interrupt injection
logic to x86.c").

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/vmx.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 29f912927a5..db0b8b6df19 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -801,8 +801,9 @@ static void vmx_queue_exception(struct kvm_vcpu *vcpu, unsigned nr,
 		vmx->rmode.irq.pending = true;
 		vmx->rmode.irq.vector = nr;
 		vmx->rmode.irq.rip = kvm_rip_read(vcpu);
-		if (nr == BP_VECTOR || nr == OF_VECTOR)
-			vmx->rmode.irq.rip++;
+		if (kvm_exception_is_soft(nr))
+			vmx->rmode.irq.rip +=
+				vmx->vcpu.arch.event_exit_inst_len;
 		intr_info |= INTR_TYPE_SOFT_INTR;
 		vmcs_write32(VM_ENTRY_INTR_INFO_FIELD, intr_info);
 		vmcs_write32(VM_ENTRY_INSTRUCTION_LEN, 1);
@@ -2468,6 +2469,9 @@ static void vmx_inject_irq(struct kvm_vcpu *vcpu)
 		vmx->rmode.irq.pending = true;
 		vmx->rmode.irq.vector = irq;
 		vmx->rmode.irq.rip = kvm_rip_read(vcpu);
+		if (vcpu->arch.interrupt.soft)
+			vmx->rmode.irq.rip +=
+				vmx->vcpu.arch.event_exit_inst_len;
 		vmcs_write32(VM_ENTRY_INTR_INFO_FIELD,
 			     irq | INTR_TYPE_SOFT_INTR | INTR_INFO_VALID_MASK);
 		vmcs_write32(VM_ENTRY_INSTRUCTION_LEN, 1);
-- 
cgit v1.2.3


From af24a4e4aec77ef16c1971cf4465f767ba946034 Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinder@kernel.org>
Date: Fri, 15 May 2009 18:42:05 +0530
Subject: KVM: Replace MSR_IA32_TIME_STAMP_COUNTER with MSR_IA32_TSC of
 msr-index.h

Use standard msr-index.h's MSR declaration.

MSR_IA32_TSC is better than MSR_IA32_TIME_STAMP_COUNTER as it also solves
80 column issue.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/include/asm/kvm_host.h | 2 --
 arch/x86/kvm/svm.c              | 4 ++--
 arch/x86/kvm/vmx.c              | 4 ++--
 arch/x86/kvm/x86.c              | 5 ++---
 4 files changed, 6 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index eabdc1cfab5..79561752af9 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -752,8 +752,6 @@ static inline void kvm_inject_gp(struct kvm_vcpu *vcpu, u32 error_code)
 	kvm_queue_exception_e(vcpu, GP_VECTOR, error_code);
 }
 
-#define MSR_IA32_TIME_STAMP_COUNTER		0x010
-
 #define TSS_IOPB_BASE_OFFSET 0x66
 #define TSS_BASE_SIZE 0x68
 #define TSS_IOPB_SIZE (65536 / 8)
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index b1f658ad2f0..48b22c9892d 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -1953,7 +1953,7 @@ static int svm_get_msr(struct kvm_vcpu *vcpu, unsigned ecx, u64 *data)
 	struct vcpu_svm *svm = to_svm(vcpu);
 
 	switch (ecx) {
-	case MSR_IA32_TIME_STAMP_COUNTER: {
+	case MSR_IA32_TSC: {
 		u64 tsc;
 
 		rdtscll(tsc);
@@ -2043,7 +2043,7 @@ static int svm_set_msr(struct kvm_vcpu *vcpu, unsigned ecx, u64 data)
 	struct vcpu_svm *svm = to_svm(vcpu);
 
 	switch (ecx) {
-	case MSR_IA32_TIME_STAMP_COUNTER: {
+	case MSR_IA32_TSC: {
 		u64 tsc;
 
 		rdtscll(tsc);
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index db0b8b6df19..c87c93fd129 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -941,7 +941,7 @@ static int vmx_get_msr(struct kvm_vcpu *vcpu, u32 msr_index, u64 *pdata)
 	case MSR_EFER:
 		return kvm_get_msr_common(vcpu, msr_index, pdata);
 #endif
-	case MSR_IA32_TIME_STAMP_COUNTER:
+	case MSR_IA32_TSC:
 		data = guest_read_tsc();
 		break;
 	case MSR_IA32_SYSENTER_CS:
@@ -1001,7 +1001,7 @@ static int vmx_set_msr(struct kvm_vcpu *vcpu, u32 msr_index, u64 data)
 	case MSR_IA32_SYSENTER_ESP:
 		vmcs_writel(GUEST_SYSENTER_ESP, data);
 		break;
-	case MSR_IA32_TIME_STAMP_COUNTER:
+	case MSR_IA32_TSC:
 		rdtscll(host_tsc);
 		guest_write_tsc(data, host_tsc);
 		break;
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 3d452901182..6d46079a901 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -466,7 +466,7 @@ static u32 msrs_to_save[] = {
 #ifdef CONFIG_X86_64
 	MSR_CSTAR, MSR_KERNEL_GS_BASE, MSR_SYSCALL_MASK, MSR_LSTAR,
 #endif
-	MSR_IA32_TIME_STAMP_COUNTER, MSR_KVM_SYSTEM_TIME, MSR_KVM_WALL_CLOCK,
+	MSR_IA32_TSC, MSR_KVM_SYSTEM_TIME, MSR_KVM_WALL_CLOCK,
 	MSR_IA32_PERF_STATUS, MSR_IA32_CR_PAT, MSR_VM_HSAVE_PA
 };
 
@@ -644,8 +644,7 @@ static void kvm_write_guest_time(struct kvm_vcpu *v)
 
 	/* Keep irq disabled to prevent changes to the clock */
 	local_irq_save(flags);
-	kvm_get_msr(v, MSR_IA32_TIME_STAMP_COUNTER,
-			  &vcpu->hv_clock.tsc_timestamp);
+	kvm_get_msr(v, MSR_IA32_TSC, &vcpu->hv_clock.tsc_timestamp);
 	ktime_get_ts(&ts);
 	local_irq_restore(flags);
 
-- 
cgit v1.2.3


From 890ca9aefa78f7831f8f633cab9e4803636dffe4 Mon Sep 17 00:00:00 2001
From: Huang Ying <ying.huang@intel.com>
Date: Mon, 11 May 2009 16:48:15 +0800
Subject: KVM: Add MCE support

The related MSRs are emulated. MCE capability is exported via
extension KVM_CAP_MCE and ioctl KVM_X86_GET_MCE_CAP_SUPPORTED.  A new
vcpu ioctl command KVM_X86_SETUP_MCE is used to setup MCE emulation
such as the mcg_cap. MCE is injected via vcpu ioctl command
KVM_X86_SET_MCE. Extended machine-check state (MCG_EXT_P) and CMCI are
not implemented.

Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/include/asm/kvm.h      |   1 +
 arch/x86/include/asm/kvm_host.h |   5 +
 arch/x86/kvm/x86.c              | 220 +++++++++++++++++++++++++++++++++++-----
 3 files changed, 202 insertions(+), 24 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/kvm.h b/arch/x86/include/asm/kvm.h
index 125be8b1956..708b9c32a5d 100644
--- a/arch/x86/include/asm/kvm.h
+++ b/arch/x86/include/asm/kvm.h
@@ -17,6 +17,7 @@
 #define __KVM_HAVE_USER_NMI
 #define __KVM_HAVE_GUEST_DEBUG
 #define __KVM_HAVE_MSIX
+#define __KVM_HAVE_MCE
 
 /* Architectural interrupt line count. */
 #define KVM_NR_INTERRUPTS 256
diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index 79561752af9..81c68f630b1 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -373,6 +373,11 @@ struct kvm_vcpu_arch {
 	unsigned long dr6;
 	unsigned long dr7;
 	unsigned long eff_db[KVM_NR_DB_REGS];
+
+	u64 mcg_cap;
+	u64 mcg_status;
+	u64 mcg_ctl;
+	u64 *mce_banks;
 };
 
 struct kvm_mem_alias {
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 6d46079a901..55a9dd182de 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -42,6 +42,7 @@
 #include <asm/msr.h>
 #include <asm/desc.h>
 #include <asm/mtrr.h>
+#include <asm/mce.h>
 
 #define MAX_IO_MSRS 256
 #define CR0_RESERVED_BITS						\
@@ -55,6 +56,10 @@
 			  | X86_CR4_OSXMMEXCPT | X86_CR4_VMXE))
 
 #define CR8_RESERVED_BITS (~(unsigned long)X86_CR8_TPR)
+
+#define KVM_MAX_MCE_BANKS 32
+#define KVM_MCE_CAP_SUPPORTED MCG_CTL_P
+
 /* EFER defaults:
  * - enable syscall per default because its emulated by KVM
  * - enable LME and LMA per default on 64 bit KVM
@@ -777,23 +782,43 @@ static int set_msr_mtrr(struct kvm_vcpu *vcpu, u32 msr, u64 data)
 	return 0;
 }
 
-int kvm_set_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 data)
+static int set_msr_mce(struct kvm_vcpu *vcpu, u32 msr, u64 data)
 {
+	u64 mcg_cap = vcpu->arch.mcg_cap;
+	unsigned bank_num = mcg_cap & 0xff;
+
 	switch (msr) {
-	case MSR_EFER:
-		set_efer(vcpu, data);
-		break;
-	case MSR_IA32_MC0_STATUS:
-		pr_unimpl(vcpu, "%s: MSR_IA32_MC0_STATUS 0x%llx, nop\n",
-		       __func__, data);
-		break;
 	case MSR_IA32_MCG_STATUS:
-		pr_unimpl(vcpu, "%s: MSR_IA32_MCG_STATUS 0x%llx, nop\n",
-			__func__, data);
+		vcpu->arch.mcg_status = data;
 		break;
 	case MSR_IA32_MCG_CTL:
-		pr_unimpl(vcpu, "%s: MSR_IA32_MCG_CTL 0x%llx, nop\n",
-			__func__, data);
+		if (!(mcg_cap & MCG_CTL_P))
+			return 1;
+		if (data != 0 && data != ~(u64)0)
+			return -1;
+		vcpu->arch.mcg_ctl = data;
+		break;
+	default:
+		if (msr >= MSR_IA32_MC0_CTL &&
+		    msr < MSR_IA32_MC0_CTL + 4 * bank_num) {
+			u32 offset = msr - MSR_IA32_MC0_CTL;
+			/* only 0 or all 1s can be written to IA32_MCi_CTL */
+			if ((offset & 0x3) == 0 &&
+			    data != 0 && data != ~(u64)0)
+				return -1;
+			vcpu->arch.mce_banks[offset] = data;
+			break;
+		}
+		return 1;
+	}
+	return 0;
+}
+
+int kvm_set_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 data)
+{
+	switch (msr) {
+	case MSR_EFER:
+		set_efer(vcpu, data);
 		break;
 	case MSR_IA32_DEBUGCTLMSR:
 		if (!data) {
@@ -849,6 +874,10 @@ int kvm_set_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 data)
 		kvm_request_guest_time_update(vcpu);
 		break;
 	}
+	case MSR_IA32_MCG_CTL:
+	case MSR_IA32_MCG_STATUS:
+	case MSR_IA32_MC0_CTL ... MSR_IA32_MC0_CTL + 4 * KVM_MAX_MCE_BANKS - 1:
+		return set_msr_mce(vcpu, msr, data);
 	default:
 		pr_unimpl(vcpu, "unhandled wrmsr: 0x%x data %llx\n", msr, data);
 		return 1;
@@ -904,26 +933,49 @@ static int get_msr_mtrr(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata)
 	return 0;
 }
 
-int kvm_get_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata)
+static int get_msr_mce(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata)
 {
 	u64 data;
+	u64 mcg_cap = vcpu->arch.mcg_cap;
+	unsigned bank_num = mcg_cap & 0xff;
 
 	switch (msr) {
-	case 0xc0010010: /* SYSCFG */
-	case 0xc0010015: /* HWCR */
-	case MSR_IA32_PLATFORM_ID:
 	case MSR_IA32_P5_MC_ADDR:
 	case MSR_IA32_P5_MC_TYPE:
-	case MSR_IA32_MC0_CTL:
-	case MSR_IA32_MCG_STATUS:
+		data = 0;
+		break;
 	case MSR_IA32_MCG_CAP:
+		data = vcpu->arch.mcg_cap;
+		break;
 	case MSR_IA32_MCG_CTL:
-	case MSR_IA32_MC0_MISC:
-	case MSR_IA32_MC0_MISC+4:
-	case MSR_IA32_MC0_MISC+8:
-	case MSR_IA32_MC0_MISC+12:
-	case MSR_IA32_MC0_MISC+16:
-	case MSR_IA32_MC0_MISC+20:
+		if (!(mcg_cap & MCG_CTL_P))
+			return 1;
+		data = vcpu->arch.mcg_ctl;
+		break;
+	case MSR_IA32_MCG_STATUS:
+		data = vcpu->arch.mcg_status;
+		break;
+	default:
+		if (msr >= MSR_IA32_MC0_CTL &&
+		    msr < MSR_IA32_MC0_CTL + 4 * bank_num) {
+			u32 offset = msr - MSR_IA32_MC0_CTL;
+			data = vcpu->arch.mce_banks[offset];
+			break;
+		}
+		return 1;
+	}
+	*pdata = data;
+	return 0;
+}
+
+int kvm_get_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata)
+{
+	u64 data;
+
+	switch (msr) {
+	case 0xc0010010: /* SYSCFG */
+	case 0xc0010015: /* HWCR */
+	case MSR_IA32_PLATFORM_ID:
 	case MSR_IA32_UCODE_REV:
 	case MSR_IA32_EBL_CR_POWERON:
 	case MSR_IA32_DEBUGCTLMSR:
@@ -966,6 +1018,13 @@ int kvm_get_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata)
 	case MSR_KVM_SYSTEM_TIME:
 		data = vcpu->arch.time;
 		break;
+	case MSR_IA32_P5_MC_ADDR:
+	case MSR_IA32_P5_MC_TYPE:
+	case MSR_IA32_MCG_CAP:
+	case MSR_IA32_MCG_CTL:
+	case MSR_IA32_MCG_STATUS:
+	case MSR_IA32_MC0_CTL ... MSR_IA32_MC0_CTL + 4 * KVM_MAX_MCE_BANKS - 1:
+		return get_msr_mce(vcpu, msr, pdata);
 	default:
 		pr_unimpl(vcpu, "unhandled rdmsr: 0x%x\n", msr);
 		return 1;
@@ -1087,6 +1146,9 @@ int kvm_dev_ioctl_check_extension(long ext)
 	case KVM_CAP_IOMMU:
 		r = iommu_found();
 		break;
+	case KVM_CAP_MCE:
+		r = KVM_MAX_MCE_BANKS;
+		break;
 	default:
 		r = 0;
 		break;
@@ -1146,6 +1208,16 @@ long kvm_arch_dev_ioctl(struct file *filp,
 		r = 0;
 		break;
 	}
+	case KVM_X86_GET_MCE_CAP_SUPPORTED: {
+		u64 mce_cap;
+
+		mce_cap = KVM_MCE_CAP_SUPPORTED;
+		r = -EFAULT;
+		if (copy_to_user(argp, &mce_cap, sizeof mce_cap))
+			goto out;
+		r = 0;
+		break;
+	}
 	default:
 		r = -EINVAL;
 	}
@@ -1502,6 +1574,80 @@ static int vcpu_ioctl_tpr_access_reporting(struct kvm_vcpu *vcpu,
 	return 0;
 }
 
+static int kvm_vcpu_ioctl_x86_setup_mce(struct kvm_vcpu *vcpu,
+					u64 mcg_cap)
+{
+	int r;
+	unsigned bank_num = mcg_cap & 0xff, bank;
+
+	r = -EINVAL;
+	if (!bank_num)
+		goto out;
+	if (mcg_cap & ~(KVM_MCE_CAP_SUPPORTED | 0xff | 0xff0000))
+		goto out;
+	r = 0;
+	vcpu->arch.mcg_cap = mcg_cap;
+	/* Init IA32_MCG_CTL to all 1s */
+	if (mcg_cap & MCG_CTL_P)
+		vcpu->arch.mcg_ctl = ~(u64)0;
+	/* Init IA32_MCi_CTL to all 1s */
+	for (bank = 0; bank < bank_num; bank++)
+		vcpu->arch.mce_banks[bank*4] = ~(u64)0;
+out:
+	return r;
+}
+
+static int kvm_vcpu_ioctl_x86_set_mce(struct kvm_vcpu *vcpu,
+				      struct kvm_x86_mce *mce)
+{
+	u64 mcg_cap = vcpu->arch.mcg_cap;
+	unsigned bank_num = mcg_cap & 0xff;
+	u64 *banks = vcpu->arch.mce_banks;
+
+	if (mce->bank >= bank_num || !(mce->status & MCI_STATUS_VAL))
+		return -EINVAL;
+	/*
+	 * if IA32_MCG_CTL is not all 1s, the uncorrected error
+	 * reporting is disabled
+	 */
+	if ((mce->status & MCI_STATUS_UC) && (mcg_cap & MCG_CTL_P) &&
+	    vcpu->arch.mcg_ctl != ~(u64)0)
+		return 0;
+	banks += 4 * mce->bank;
+	/*
+	 * if IA32_MCi_CTL is not all 1s, the uncorrected error
+	 * reporting is disabled for the bank
+	 */
+	if ((mce->status & MCI_STATUS_UC) && banks[0] != ~(u64)0)
+		return 0;
+	if (mce->status & MCI_STATUS_UC) {
+		if ((vcpu->arch.mcg_status & MCG_STATUS_MCIP) ||
+		    !(vcpu->arch.cr4 & X86_CR4_MCE)) {
+			printk(KERN_DEBUG "kvm: set_mce: "
+			       "injects mce exception while "
+			       "previous one is in progress!\n");
+			set_bit(KVM_REQ_TRIPLE_FAULT, &vcpu->requests);
+			return 0;
+		}
+		if (banks[1] & MCI_STATUS_VAL)
+			mce->status |= MCI_STATUS_OVER;
+		banks[2] = mce->addr;
+		banks[3] = mce->misc;
+		vcpu->arch.mcg_status = mce->mcg_status;
+		banks[1] = mce->status;
+		kvm_queue_exception(vcpu, MC_VECTOR);
+	} else if (!(banks[1] & MCI_STATUS_VAL)
+		   || !(banks[1] & MCI_STATUS_UC)) {
+		if (banks[1] & MCI_STATUS_VAL)
+			mce->status |= MCI_STATUS_OVER;
+		banks[2] = mce->addr;
+		banks[3] = mce->misc;
+		banks[1] = mce->status;
+	} else
+		banks[1] |= MCI_STATUS_OVER;
+	return 0;
+}
+
 long kvm_arch_vcpu_ioctl(struct file *filp,
 			 unsigned int ioctl, unsigned long arg)
 {
@@ -1635,6 +1781,24 @@ long kvm_arch_vcpu_ioctl(struct file *filp,
 		kvm_lapic_set_vapic_addr(vcpu, va.vapic_addr);
 		break;
 	}
+	case KVM_X86_SETUP_MCE: {
+		u64 mcg_cap;
+
+		r = -EFAULT;
+		if (copy_from_user(&mcg_cap, argp, sizeof mcg_cap))
+			goto out;
+		r = kvm_vcpu_ioctl_x86_setup_mce(vcpu, mcg_cap);
+		break;
+	}
+	case KVM_X86_SET_MCE: {
+		struct kvm_x86_mce mce;
+
+		r = -EFAULT;
+		if (copy_from_user(&mce, argp, sizeof mce))
+			goto out;
+		r = kvm_vcpu_ioctl_x86_set_mce(vcpu, &mce);
+		break;
+	}
 	default:
 		r = -EINVAL;
 	}
@@ -4440,6 +4604,14 @@ int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu)
 			goto fail_mmu_destroy;
 	}
 
+	vcpu->arch.mce_banks = kzalloc(KVM_MAX_MCE_BANKS * sizeof(u64) * 4,
+				       GFP_KERNEL);
+	if (!vcpu->arch.mce_banks) {
+		r = -ENOMEM;
+		goto fail_mmu_destroy;
+	}
+	vcpu->arch.mcg_cap = KVM_MAX_MCE_BANKS;
+
 	return 0;
 
 fail_mmu_destroy:
-- 
cgit v1.2.3


From 60af2ecdc53af5b941e4a2eb99862a7ccf3ed7c8 Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinder@kernel.org>
Date: Thu, 14 May 2009 11:00:10 +0530
Subject: KVM: Use MSR names in place of address

Replace 0xc0010010 with MSR_K8_SYSCFG and 0xc0010015 with MSR_K7_HWCR.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/x86.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 55a9dd182de..a93ba37eb52 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -973,8 +973,6 @@ int kvm_get_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata)
 	u64 data;
 
 	switch (msr) {
-	case 0xc0010010: /* SYSCFG */
-	case 0xc0010015: /* HWCR */
 	case MSR_IA32_PLATFORM_ID:
 	case MSR_IA32_UCODE_REV:
 	case MSR_IA32_EBL_CR_POWERON:
@@ -983,6 +981,8 @@ int kvm_get_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata)
 	case MSR_IA32_LASTBRANCHTOIP:
 	case MSR_IA32_LASTINTFROMIP:
 	case MSR_IA32_LASTINTTOIP:
+	case MSR_K8_SYSCFG:
+	case MSR_K7_HWCR:
 	case MSR_VM_HSAVE_PA:
 	case MSR_P6_EVNTSEL0:
 	case MSR_P6_EVNTSEL1:
-- 
cgit v1.2.3


From cb007648de83cf226d69ec76e1c01848b4e8e49f Mon Sep 17 00:00:00 2001
From: Mark McLoughlin <markmc@redhat.com>
Date: Tue, 12 May 2009 12:36:44 +0100
Subject: KVM: fix cpuid E2BIG handling for extended request types

If we run out of cpuid entries for extended request types
we should return -E2BIG, just like we do for the standard
request types.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/x86.c | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index a93ba37eb52..25a1c5739df 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -1506,6 +1506,10 @@ static int kvm_dev_ioctl_get_supported_cpuid(struct kvm_cpuid2 *cpuid,
 	for (func = 0x80000001; func <= limit && nent < cpuid->nent; ++func)
 		do_cpuid_ent(&cpuid_entries[nent], func, 0,
 			     &nent, cpuid->nent);
+	r = -E2BIG;
+	if (nent >= cpuid->nent)
+		goto out_free;
+
 	r = -EFAULT;
 	if (copy_to_user(entries, cpuid_entries,
 			 nent * sizeof(struct kvm_cpuid_entry2)))
-- 
cgit v1.2.3


From c9eaf20f268c7051bfde2ba212c5ea76a6cbc7a1 Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Mon, 18 May 2009 16:13:45 +0300
Subject: KVM: x86 emulator: Implement zero-extended immediate decoding

Absolute jumps use zero extended immediate operands.

Cc: stable@kernel.org
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/x86_emulate.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kvm/x86_emulate.c b/arch/x86/kvm/x86_emulate.c
index 616de4628d6..a30d5fc17ee 100644
--- a/arch/x86/kvm/x86_emulate.c
+++ b/arch/x86/kvm/x86_emulate.c
@@ -60,6 +60,7 @@
 #define SrcImmByte  (6<<4)	/* 8-bit sign-extended immediate operand. */
 #define SrcOne      (7<<4)	/* Implied '1' */
 #define SrcImmUByte (8<<4)      /* 8-bit unsigned immediate operand. */
+#define SrcImmU     (9<<4)      /* Immediate operand, unsigned */
 #define SrcMask     (0xf<<4)
 /* Generic ModRM decode. */
 #define ModRM       (1<<8)
@@ -1027,6 +1028,7 @@ done_prefixes:
 		c->src.type = OP_MEM;
 		break;
 	case SrcImm:
+	case SrcImmU:
 		c->src.type = OP_IMM;
 		c->src.ptr = (unsigned long *)c->eip;
 		c->src.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
@@ -1044,6 +1046,19 @@ done_prefixes:
 			c->src.val = insn_fetch(s32, 4, c->eip);
 			break;
 		}
+		if ((c->d & SrcMask) == SrcImmU) {
+			switch (c->src.bytes) {
+			case 1:
+				c->src.val &= 0xff;
+				break;
+			case 2:
+				c->src.val &= 0xffff;
+				break;
+			case 4:
+				c->src.val &= 0xffffffff;
+				break;
+			}
+		}
 		break;
 	case SrcImmByte:
 	case SrcImmUByte:
-- 
cgit v1.2.3


From ee3d29e8bee8d7c321279a9bd9bd25d4cfbf79b7 Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Mon, 18 May 2009 16:15:20 +0300
Subject: KVM: x86 emulator: fix jmp far decoding (opcode 0xea)

The jump target should not be sign extened; use an unsigned decode flag.

Cc: stable@kernel.org
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/x86_emulate.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/x86_emulate.c b/arch/x86/kvm/x86_emulate.c
index a30d5fc17ee..ef4dfca3ed7 100644
--- a/arch/x86/kvm/x86_emulate.c
+++ b/arch/x86/kvm/x86_emulate.c
@@ -196,7 +196,7 @@ static u32 opcode_table[256] = {
 	ByteOp | SrcImmUByte, SrcImmUByte,
 	/* 0xE8 - 0xEF */
 	SrcImm | Stack, SrcImm | ImplicitOps,
-	SrcImm | Src2Imm16, SrcImmByte | ImplicitOps,
+	SrcImmU | Src2Imm16, SrcImmByte | ImplicitOps,
 	SrcNone | ByteOp | ImplicitOps, SrcNone | ImplicitOps,
 	SrcNone | ByteOp | ImplicitOps, SrcNone | ImplicitOps,
 	/* 0xF0 - 0xF7 */
-- 
cgit v1.2.3


From 284e9b0f5ad0c049efb7f145588782bf3d8be93e Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@infradead.org>
Date: Mon, 18 May 2009 08:16:14 -0400
Subject: KVM: cleanup arch/x86/kvm/Makefile

Use proper foo-y style list additions to cleanup all the conditionals,
move module selection after compound object selection and remove the
superflous comment.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/Makefile | 32 +++++++++++++-------------------
 1 file changed, 13 insertions(+), 19 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/Makefile b/arch/x86/kvm/Makefile
index b43c4efafe8..bee9512cd60 100644
--- a/arch/x86/kvm/Makefile
+++ b/arch/x86/kvm/Makefile
@@ -1,22 +1,16 @@
-#
-# Makefile for Kernel-based Virtual Machine module
-#
-
-common-objs = $(addprefix ../../../virt/kvm/, kvm_main.o ioapic.o \
-                coalesced_mmio.o irq_comm.o)
-ifeq ($(CONFIG_KVM_TRACE),y)
-common-objs += $(addprefix ../../../virt/kvm/, kvm_trace.o)
-endif
-ifeq ($(CONFIG_IOMMU_API),y)
-common-objs += $(addprefix ../../../virt/kvm/, iommu.o)
-endif
 
 EXTRA_CFLAGS += -Ivirt/kvm -Iarch/x86/kvm
 
-kvm-objs := $(common-objs) x86.o mmu.o x86_emulate.o i8259.o irq.o lapic.o \
-	i8254.o timer.o
-obj-$(CONFIG_KVM) += kvm.o
-kvm-intel-objs = vmx.o
-obj-$(CONFIG_KVM_INTEL) += kvm-intel.o
-kvm-amd-objs = svm.o
-obj-$(CONFIG_KVM_AMD) += kvm-amd.o
+kvm-y			+= $(addprefix ../../../virt/kvm/, kvm_main.o ioapic.o \
+				coalesced_mmio.o irq_comm.o)
+kvm-$(CONFIG_KVM_TRACE)	+= $(addprefix ../../../virt/kvm/, kvm_trace.o)
+kvm-$(CONFIG_IOMMU_API)	+= $(addprefix ../../../virt/kvm/, iommu.o)
+
+kvm-y			+= x86.o mmu.o x86_emulate.o i8259.o irq.o lapic.o \
+			   i8254.o timer.o
+kvm-intel-y		+= vmx.o
+kvm-amd-y		+= svm.o
+
+obj-$(CONFIG_KVM)	+= kvm.o
+obj-$(CONFIG_KVM_INTEL)	+= kvm-intel.o
+obj-$(CONFIG_KVM_AMD)	+= kvm-amd.o
-- 
cgit v1.2.3


From 787ff73637bbf34ef276cb04a127b421de71cc43 Mon Sep 17 00:00:00 2001
From: Gleb Natapov <gleb@redhat.com>
Date: Mon, 18 May 2009 11:44:06 +0300
Subject: KVM: Drop interrupt shadow when single stepping should be done only
 on VMX

The problem exists only on VMX. Also currently we skip this step if
there is pending exception. The patch fixes this too.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/vmx.c | 8 ++++++++
 arch/x86/kvm/x86.c | 3 ---
 2 files changed, 8 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index c87c93fd129..c14bffc8c1f 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -3453,6 +3453,14 @@ static void vmx_vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	if (test_bit(VCPU_REGS_RIP, (unsigned long *)&vcpu->arch.regs_dirty))
 		vmcs_writel(GUEST_RIP, vcpu->arch.regs[VCPU_REGS_RIP]);
 
+	/* When single-stepping over STI and MOV SS, we must clear the
+	 * corresponding interruptibility bits in the guest state. Otherwise
+	 * vmentry fails as it then expects bit 14 (BS) in pending debug
+	 * exceptions being set, but that's not correct for the guest debugging
+	 * case. */
+	if (vcpu->guest_debug & KVM_GUESTDBG_SINGLESTEP)
+		vmx_set_interrupt_shadow(vcpu, 0);
+
 	/*
 	 * Loading guest fpu may have cleared host cr0.ts
 	 */
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 25a1c5739df..f0642396783 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -3361,9 +3361,6 @@ static void update_cr8_intercept(struct kvm_vcpu *vcpu)
 
 static void inject_pending_irq(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 {
-	if (vcpu->guest_debug & KVM_GUESTDBG_SINGLESTEP)
-		kvm_x86_ops->set_interrupt_shadow(vcpu, 0);
-
 	/* try to reinject previous events if any */
 	if (vcpu->arch.nmi_injected) {
 		kvm_x86_ops->set_nmi(vcpu);
-- 
cgit v1.2.3


From 0ba12d10817a8db1fd7d96d3283ec6c0b294aeab Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Thu, 21 May 2009 16:45:19 +0300
Subject: KVM: Move common KVM Kconfig items to new file virt/kvm/Kconfig

Reduce Kconfig code duplication.

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/ia64/kvm/Kconfig    | 7 ++-----
 arch/powerpc/kvm/Kconfig | 3 +--
 arch/s390/kvm/Kconfig    | 6 +-----
 arch/x86/kvm/Kconfig     | 7 ++-----
 4 files changed, 6 insertions(+), 17 deletions(-)

(limited to 'arch')

diff --git a/arch/ia64/kvm/Kconfig b/arch/ia64/kvm/Kconfig
index 64d52093787..f922bbba379 100644
--- a/arch/ia64/kvm/Kconfig
+++ b/arch/ia64/kvm/Kconfig
@@ -1,12 +1,8 @@
 #
 # KVM configuration
 #
-config HAVE_KVM
-	bool
 
-config HAVE_KVM_IRQCHIP
-       bool
-       default y
+source "virt/kvm/Kconfig"
 
 menuconfig VIRTUALIZATION
 	bool "Virtualization"
@@ -28,6 +24,7 @@ config KVM
 	depends on PCI
 	select PREEMPT_NOTIFIERS
 	select ANON_INODES
+	select HAVE_KVM_IRQCHIP
 	---help---
 	  Support hosting fully virtualized guest machines using hardware
 	  virtualization extensions.  You will need a fairly recent
diff --git a/arch/powerpc/kvm/Kconfig b/arch/powerpc/kvm/Kconfig
index 5a152a52796..46019dccce1 100644
--- a/arch/powerpc/kvm/Kconfig
+++ b/arch/powerpc/kvm/Kconfig
@@ -2,8 +2,7 @@
 # KVM configuration
 #
 
-config HAVE_KVM_IRQCHIP
-       bool
+source "virt/kvm/Kconfig"
 
 menuconfig VIRTUALIZATION
 	bool "Virtualization"
diff --git a/arch/s390/kvm/Kconfig b/arch/s390/kvm/Kconfig
index 3e260b7e37b..ad75ce33be1 100644
--- a/arch/s390/kvm/Kconfig
+++ b/arch/s390/kvm/Kconfig
@@ -1,11 +1,7 @@
 #
 # KVM configuration
 #
-config HAVE_KVM
-       bool
-
-config HAVE_KVM_IRQCHIP
-       bool
+source "virt/kvm/Kconfig"
 
 menuconfig VIRTUALIZATION
 	bool "Virtualization"
diff --git a/arch/x86/kvm/Kconfig b/arch/x86/kvm/Kconfig
index 8600a09e0c6..939b1cb9c5b 100644
--- a/arch/x86/kvm/Kconfig
+++ b/arch/x86/kvm/Kconfig
@@ -1,12 +1,8 @@
 #
 # KVM configuration
 #
-config HAVE_KVM
-       bool
 
-config HAVE_KVM_IRQCHIP
-       bool
-       default y
+source "virt/kvm/Kconfig"
 
 menuconfig VIRTUALIZATION
 	bool "Virtualization"
@@ -29,6 +25,7 @@ config KVM
 	select PREEMPT_NOTIFIERS
 	select MMU_NOTIFIER
 	select ANON_INODES
+	select HAVE_KVM_IRQCHIP
 	---help---
 	  Support hosting fully virtualized guest machines using hardware
 	  virtualization extensions.  You will need a fairly recent
-- 
cgit v1.2.3


From 721eecbf4fe995ca94a9edec0c9843b1cc0eaaf3 Mon Sep 17 00:00:00 2001
From: Gregory Haskins <ghaskins@novell.com>
Date: Wed, 20 May 2009 10:30:49 -0400
Subject: KVM: irqfd

KVM provides a complete virtual system environment for guests, including
support for injecting interrupts modeled after the real exception/interrupt
facilities present on the native platform (such as the IDT on x86).
Virtual interrupts can come from a variety of sources (emulated devices,
pass-through devices, etc) but all must be injected to the guest via
the KVM infrastructure.  This patch adds a new mechanism to inject a specific
interrupt to a guest using a decoupled eventfd mechnanism:  Any legal signal
on the irqfd (using eventfd semantics from either userspace or kernel) will
translate into an injected interrupt in the guest at the next available
interrupt window.

Signed-off-by: Gregory Haskins <ghaskins@novell.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/Kconfig  | 1 +
 arch/x86/kvm/Makefile | 2 +-
 arch/x86/kvm/x86.c    | 1 +
 3 files changed, 3 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/Kconfig b/arch/x86/kvm/Kconfig
index 939b1cb9c5b..8cd2a4efe23 100644
--- a/arch/x86/kvm/Kconfig
+++ b/arch/x86/kvm/Kconfig
@@ -26,6 +26,7 @@ config KVM
 	select MMU_NOTIFIER
 	select ANON_INODES
 	select HAVE_KVM_IRQCHIP
+	select HAVE_KVM_EVENTFD
 	---help---
 	  Support hosting fully virtualized guest machines using hardware
 	  virtualization extensions.  You will need a fairly recent
diff --git a/arch/x86/kvm/Makefile b/arch/x86/kvm/Makefile
index bee9512cd60..01e3c61f749 100644
--- a/arch/x86/kvm/Makefile
+++ b/arch/x86/kvm/Makefile
@@ -2,7 +2,7 @@
 EXTRA_CFLAGS += -Ivirt/kvm -Iarch/x86/kvm
 
 kvm-y			+= $(addprefix ../../../virt/kvm/, kvm_main.o ioapic.o \
-				coalesced_mmio.o irq_comm.o)
+				coalesced_mmio.o irq_comm.o eventfd.o)
 kvm-$(CONFIG_KVM_TRACE)	+= $(addprefix ../../../virt/kvm/, kvm_trace.o)
 kvm-$(CONFIG_IOMMU_API)	+= $(addprefix ../../../virt/kvm/, iommu.o)
 
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index f0642396783..15f39fc08ec 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -1126,6 +1126,7 @@ int kvm_dev_ioctl_check_extension(long ext)
 	case KVM_CAP_REINJECT_CONTROL:
 	case KVM_CAP_IRQ_INJECT_STATUS:
 	case KVM_CAP_ASSIGN_DEV_IRQ:
+	case KVM_CAP_IRQFD:
 		r = 1;
 		break;
 	case KVM_CAP_COALESCED_MMIO:
-- 
cgit v1.2.3


From c5ff41ce66382d657a76bc06ba252d848826950f Mon Sep 17 00:00:00 2001
From: Jan Kiszka <jan.kiszka@web.de>
Date: Thu, 14 May 2009 22:42:53 +0200
Subject: KVM: Allow PIT emulation without speaker port

The in-kernel speaker emulation is only a dummy and also unneeded from
the performance point of view. Rather, it takes user space support to
generate sound output on the host, e.g. console beeps.

To allow this, introduce KVM_CREATE_PIT2 which controls in-kernel
speaker port emulation via a flag passed along the new IOCTL. It also
leaves room for future extensions of the PIT configuration interface.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/i8254.c | 14 ++++++++------
 arch/x86/kvm/i8254.h |  2 +-
 arch/x86/kvm/x86.c   | 12 +++++++++++-
 3 files changed, 20 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/i8254.c b/arch/x86/kvm/i8254.c
index 21f68e00524..0990bc9aac1 100644
--- a/arch/x86/kvm/i8254.c
+++ b/arch/x86/kvm/i8254.c
@@ -563,7 +563,7 @@ static void pit_mask_notifer(struct kvm_irq_mask_notifier *kimn, bool mask)
 	}
 }
 
-struct kvm_pit *kvm_create_pit(struct kvm *kvm)
+struct kvm_pit *kvm_create_pit(struct kvm *kvm, u32 flags)
 {
 	struct kvm_pit *pit;
 	struct kvm_kpit_state *pit_state;
@@ -589,11 +589,13 @@ struct kvm_pit *kvm_create_pit(struct kvm *kvm)
 	pit->dev.private = pit;
 	kvm_io_bus_register_dev(&kvm->pio_bus, &pit->dev);
 
-	pit->speaker_dev.read = speaker_ioport_read;
-	pit->speaker_dev.write = speaker_ioport_write;
-	pit->speaker_dev.in_range = speaker_in_range;
-	pit->speaker_dev.private = pit;
-	kvm_io_bus_register_dev(&kvm->pio_bus, &pit->speaker_dev);
+	if (flags & KVM_PIT_SPEAKER_DUMMY) {
+		pit->speaker_dev.read = speaker_ioport_read;
+		pit->speaker_dev.write = speaker_ioport_write;
+		pit->speaker_dev.in_range = speaker_in_range;
+		pit->speaker_dev.private = pit;
+		kvm_io_bus_register_dev(&kvm->pio_bus, &pit->speaker_dev);
+	}
 
 	kvm->arch.vpit = pit;
 	pit->kvm = kvm;
diff --git a/arch/x86/kvm/i8254.h b/arch/x86/kvm/i8254.h
index bbd863ff60b..b2670180f22 100644
--- a/arch/x86/kvm/i8254.h
+++ b/arch/x86/kvm/i8254.h
@@ -50,7 +50,7 @@ struct kvm_pit {
 
 void kvm_inject_pit_timer_irqs(struct kvm_vcpu *vcpu);
 void kvm_pit_load_count(struct kvm *kvm, int channel, u32 val);
-struct kvm_pit *kvm_create_pit(struct kvm *kvm);
+struct kvm_pit *kvm_create_pit(struct kvm *kvm, u32 flags);
 void kvm_free_pit(struct kvm *kvm);
 void kvm_pit_reset(struct kvm_pit *pit);
 
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 15f39fc08ec..5eb3b8dd74b 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -1127,6 +1127,7 @@ int kvm_dev_ioctl_check_extension(long ext)
 	case KVM_CAP_IRQ_INJECT_STATUS:
 	case KVM_CAP_ASSIGN_DEV_IRQ:
 	case KVM_CAP_IRQFD:
+	case KVM_CAP_PIT2:
 		r = 1;
 		break;
 	case KVM_CAP_COALESCED_MMIO:
@@ -2038,6 +2039,7 @@ long kvm_arch_vm_ioctl(struct file *filp,
 	union {
 		struct kvm_pit_state ps;
 		struct kvm_memory_alias alias;
+		struct kvm_pit_config pit_config;
 	} u;
 
 	switch (ioctl) {
@@ -2098,12 +2100,20 @@ long kvm_arch_vm_ioctl(struct file *filp,
 		}
 		break;
 	case KVM_CREATE_PIT:
+		u.pit_config.flags = KVM_PIT_SPEAKER_DUMMY;
+		goto create_pit;
+	case KVM_CREATE_PIT2:
+		r = -EFAULT;
+		if (copy_from_user(&u.pit_config, argp,
+				   sizeof(struct kvm_pit_config)))
+			goto out;
+	create_pit:
 		mutex_lock(&kvm->lock);
 		r = -EEXIST;
 		if (kvm->arch.vpit)
 			goto create_pit_unlock;
 		r = -ENOMEM;
-		kvm->arch.vpit = kvm_create_pit(kvm);
+		kvm->arch.vpit = kvm_create_pit(kvm, u.pit_config.flags);
 		if (kvm->arch.vpit)
 			r = 0;
 	create_pit_unlock:
-- 
cgit v1.2.3


From 3032b925f00ba2653f7695d356d6f8284c82038d Mon Sep 17 00:00:00 2001
From: Jes Sorensen <jes@sgi.com>
Date: Mon, 25 May 2009 10:22:17 +0200
Subject: KVM: ia64: Correct itc_offset calculations

Init the itc_offset for all possible vCPUs. The current code by
mistake ends up only initializing the offset on vCPU 0.

Spotted by Gleb Natapov.

Signed-off-by: Jes Sorensen <jes@sgi.com>
Acked-by : Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/ia64/kvm/kvm-ia64.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/ia64/kvm/kvm-ia64.c b/arch/ia64/kvm/kvm-ia64.c
index 80c57b0a21c..319922137fd 100644
--- a/arch/ia64/kvm/kvm-ia64.c
+++ b/arch/ia64/kvm/kvm-ia64.c
@@ -1224,7 +1224,7 @@ int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu)
 
 		/*Initialize itc offset for vcpus*/
 		itc_offset = 0UL - kvm_get_itc(vcpu);
-		for (i = 0; i < kvm->arch.online_vcpus; i++) {
+		for (i = 0; i < KVM_MAX_VCPUS; i++) {
 			v = (struct kvm_vcpu *)((char *)vcpu +
 					sizeof(struct kvm_vcpu_data) * i);
 			v->arch.itc_offset = itc_offset;
-- 
cgit v1.2.3


From 9ace903d171db7dc2fed96e44ac62b6f4c3ccb3d Mon Sep 17 00:00:00 2001
From: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
Date: Wed, 20 May 2009 15:34:55 +0200
Subject: KVM: s390: infrastructure to kick vcpus out of guest state

To ensure vcpu's come out of guest context in certain cases this patch adds a
s390 specific way to kick them out of guest context. Currently it kicks them
out to rerun the vcpu_run path in the s390 code, but the mechanism itself is
expandable and with a new flag we could also add e.g. kicks to userspace etc.

Signed-off-by: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/s390/include/asm/kvm_host.h |  5 ++--
 arch/s390/kvm/intercept.c        | 12 ++++++---
 arch/s390/kvm/kvm-s390.c         |  5 ++++
 arch/s390/kvm/kvm-s390.h         |  3 +++
 arch/s390/kvm/sigp.c             | 56 ++++++++++++++++++++++++----------------
 5 files changed, 54 insertions(+), 27 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/include/asm/kvm_host.h b/arch/s390/include/asm/kvm_host.h
index 1cd02f6073a..0a784f6f9c9 100644
--- a/arch/s390/include/asm/kvm_host.h
+++ b/arch/s390/include/asm/kvm_host.h
@@ -182,8 +182,9 @@ struct kvm_s390_interrupt_info {
 };
 
 /* for local_interrupt.action_flags */
-#define ACTION_STORE_ON_STOP 1
-#define ACTION_STOP_ON_STOP  2
+#define ACTION_STORE_ON_STOP		(1<<0)
+#define ACTION_STOP_ON_STOP		(1<<1)
+#define ACTION_RELOADVCPU_ON_STOP	(1<<2)
 
 struct kvm_s390_local_interrupt {
 	spinlock_t lock;
diff --git a/arch/s390/kvm/intercept.c b/arch/s390/kvm/intercept.c
index 98997ccba50..0732ab4305f 100644
--- a/arch/s390/kvm/intercept.c
+++ b/arch/s390/kvm/intercept.c
@@ -128,7 +128,7 @@ static int handle_noop(struct kvm_vcpu *vcpu)
 
 static int handle_stop(struct kvm_vcpu *vcpu)
 {
-	int rc;
+	int rc = 0;
 
 	vcpu->stat.exit_stop_request++;
 	atomic_clear_mask(CPUSTAT_RUNNING, &vcpu->arch.sie_block->cpuflags);
@@ -141,12 +141,18 @@ static int handle_stop(struct kvm_vcpu *vcpu)
 			rc = -ENOTSUPP;
 	}
 
+	if (vcpu->arch.local_int.action_bits & ACTION_RELOADVCPU_ON_STOP) {
+		vcpu->arch.local_int.action_bits &= ~ACTION_RELOADVCPU_ON_STOP;
+		rc = SIE_INTERCEPT_RERUNVCPU;
+		vcpu->run->exit_reason = KVM_EXIT_INTR;
+	}
+
 	if (vcpu->arch.local_int.action_bits & ACTION_STOP_ON_STOP) {
 		vcpu->arch.local_int.action_bits &= ~ACTION_STOP_ON_STOP;
 		VCPU_EVENT(vcpu, 3, "%s", "cpu stopped");
 		rc = -ENOTSUPP;
-	} else
-		rc = 0;
+	}
+
 	spin_unlock_bh(&vcpu->arch.local_int.lock);
 	return rc;
 }
diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index 90d9d1ba258..1d65f627716 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -490,6 +490,7 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 
 	vcpu_load(vcpu);
 
+rerun_vcpu:
 	/* verify, that memory has been registered */
 	if (!vcpu->kvm->arch.guest_memsize) {
 		vcpu_put(vcpu);
@@ -509,6 +510,7 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 		vcpu->arch.sie_block->gpsw.addr = kvm_run->s390_sieic.addr;
 		break;
 	case KVM_EXIT_UNKNOWN:
+	case KVM_EXIT_INTR:
 	case KVM_EXIT_S390_RESET:
 		break;
 	default:
@@ -522,6 +524,9 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 		rc = kvm_handle_sie_intercept(vcpu);
 	} while (!signal_pending(current) && !rc);
 
+	if (rc == SIE_INTERCEPT_RERUNVCPU)
+		goto rerun_vcpu;
+
 	if (signal_pending(current) && !rc)
 		rc = -EINTR;
 
diff --git a/arch/s390/kvm/kvm-s390.h b/arch/s390/kvm/kvm-s390.h
index 748fee87232..2072cd4a013 100644
--- a/arch/s390/kvm/kvm-s390.h
+++ b/arch/s390/kvm/kvm-s390.h
@@ -20,6 +20,8 @@
 
 typedef int (*intercept_handler_t)(struct kvm_vcpu *vcpu);
 
+/* negativ values are error codes, positive values for internal conditions */
+#define SIE_INTERCEPT_RERUNVCPU		(1<<0)
 int kvm_handle_sie_intercept(struct kvm_vcpu *vcpu);
 
 #define VM_EVENT(d_kvm, d_loglevel, d_string, d_args...)\
@@ -50,6 +52,7 @@ int kvm_s390_inject_vm(struct kvm *kvm,
 int kvm_s390_inject_vcpu(struct kvm_vcpu *vcpu,
 		struct kvm_s390_interrupt *s390int);
 int kvm_s390_inject_program_int(struct kvm_vcpu *vcpu, u16 code);
+int kvm_s390_inject_sigp_stop(struct kvm_vcpu *vcpu, int action);
 
 /* implemented in priv.c */
 int kvm_s390_handle_b2(struct kvm_vcpu *vcpu);
diff --git a/arch/s390/kvm/sigp.c b/arch/s390/kvm/sigp.c
index 0ef81d6776e..21897b0f8a3 100644
--- a/arch/s390/kvm/sigp.c
+++ b/arch/s390/kvm/sigp.c
@@ -1,7 +1,7 @@
 /*
  * sigp.c - handlinge interprocessor communication
  *
- * Copyright IBM Corp. 2008
+ * Copyright IBM Corp. 2008,2009
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License (version 2 only)
@@ -9,6 +9,7 @@
  *
  *    Author(s): Carsten Otte <cotte@de.ibm.com>
  *               Christian Borntraeger <borntraeger@de.ibm.com>
+ *               Christian Ehrhardt <ehrhardt@de.ibm.com>
  */
 
 #include <linux/kvm.h>
@@ -107,46 +108,57 @@ unlock:
 	return rc;
 }
 
-static int __sigp_stop(struct kvm_vcpu *vcpu, u16 cpu_addr, int store)
+static int __inject_sigp_stop(struct kvm_s390_local_interrupt *li, int action)
 {
-	struct kvm_s390_float_interrupt *fi = &vcpu->kvm->arch.float_int;
-	struct kvm_s390_local_interrupt *li;
 	struct kvm_s390_interrupt_info *inti;
-	int rc;
-
-	if (cpu_addr >= KVM_MAX_VCPUS)
-		return 3; /* not operational */
 
 	inti = kzalloc(sizeof(*inti), GFP_KERNEL);
 	if (!inti)
 		return -ENOMEM;
-
 	inti->type = KVM_S390_SIGP_STOP;
 
-	spin_lock(&fi->lock);
-	li = fi->local_int[cpu_addr];
-	if (li == NULL) {
-		rc = 3; /* not operational */
-		kfree(inti);
-		goto unlock;
-	}
 	spin_lock_bh(&li->lock);
 	list_add_tail(&inti->list, &li->list);
 	atomic_set(&li->active, 1);
 	atomic_set_mask(CPUSTAT_STOP_INT, li->cpuflags);
-	if (store)
-		li->action_bits |= ACTION_STORE_ON_STOP;
-	li->action_bits |= ACTION_STOP_ON_STOP;
+	li->action_bits |= action;
 	if (waitqueue_active(&li->wq))
 		wake_up_interruptible(&li->wq);
 	spin_unlock_bh(&li->lock);
-	rc = 0; /* order accepted */
+
+	return 0; /* order accepted */
+}
+
+static int __sigp_stop(struct kvm_vcpu *vcpu, u16 cpu_addr, int action)
+{
+	struct kvm_s390_float_interrupt *fi = &vcpu->kvm->arch.float_int;
+	struct kvm_s390_local_interrupt *li;
+	int rc;
+
+	if (cpu_addr >= KVM_MAX_VCPUS)
+		return 3; /* not operational */
+
+	spin_lock(&fi->lock);
+	li = fi->local_int[cpu_addr];
+	if (li == NULL) {
+		rc = 3; /* not operational */
+		goto unlock;
+	}
+
+	rc = __inject_sigp_stop(li, action);
+
 unlock:
 	spin_unlock(&fi->lock);
 	VCPU_EVENT(vcpu, 4, "sent sigp stop to cpu %x", cpu_addr);
 	return rc;
 }
 
+int kvm_s390_inject_sigp_stop(struct kvm_vcpu *vcpu, int action)
+{
+	struct kvm_s390_local_interrupt *li = &vcpu->arch.local_int;
+	return __inject_sigp_stop(li, action);
+}
+
 static int __sigp_set_arch(struct kvm_vcpu *vcpu, u32 parameter)
 {
 	int rc;
@@ -262,11 +274,11 @@ int kvm_s390_handle_sigp(struct kvm_vcpu *vcpu)
 		break;
 	case SIGP_STOP:
 		vcpu->stat.instruction_sigp_stop++;
-		rc = __sigp_stop(vcpu, cpu_addr, 0);
+		rc = __sigp_stop(vcpu, cpu_addr, ACTION_STOP_ON_STOP);
 		break;
 	case SIGP_STOP_STORE_STATUS:
 		vcpu->stat.instruction_sigp_stop++;
-		rc = __sigp_stop(vcpu, cpu_addr, 1);
+		rc = __sigp_stop(vcpu, cpu_addr, ACTION_STORE_ON_STOP);
 		break;
 	case SIGP_SET_ARCH:
 		vcpu->stat.instruction_sigp_arch++;
-- 
cgit v1.2.3


From b1d16c495d9e6fe48e7df2e1d18cafc6555a116a Mon Sep 17 00:00:00 2001
From: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
Date: Wed, 20 May 2009 15:34:56 +0200
Subject: KVM: s390: fix signal handling

If signal pending is true we exit without updating kvm_run, userspace
currently just does nothing and jumps to kvm_run again.
Since we did not set an exit_reason we might end up with a random one
(whatever was the last exit). Therefore it was possible to e.g. jump to
the psw position the last real interruption set.
Setting the INTR exit reason ensures that no old psw data is swapped
in on reentry.

Signed-off-by: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/s390/kvm/kvm-s390.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index 1d65f627716..5c1c3025900 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -527,8 +527,10 @@ rerun_vcpu:
 	if (rc == SIE_INTERCEPT_RERUNVCPU)
 		goto rerun_vcpu;
 
-	if (signal_pending(current) && !rc)
+	if (signal_pending(current) && !rc) {
+		kvm_run->exit_reason = KVM_EXIT_INTR;
 		rc = -EINTR;
+	}
 
 	if (rc == -ENOTSUPP) {
 		/* intercept cannot be handled in-kernel, prepare kvm-run */
-- 
cgit v1.2.3


From 628eb9b8a8f3ef31d8316112a4596b1a21b38159 Mon Sep 17 00:00:00 2001
From: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
Date: Mon, 25 May 2009 13:40:51 +0200
Subject: KVM: s390: streamline memslot handling

This patch relocates the variables kvm-s390 uses to track guest mem addr/size.
As discussed dropping the variables at struct kvm_arch level allows to use the
common vcpu->request based mechanism to reload guest memory if e.g. changes
via set_memory_region.

The kick mechanism introduced in this series is used to ensure running vcpus
leave guest state to catch the update.

Signed-off-by: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/s390/include/asm/kvm_host.h |  4 +---
 arch/s390/kvm/gaccess.h          | 23 +++++++++---------
 arch/s390/kvm/intercept.c        |  6 ++---
 arch/s390/kvm/kvm-s390.c         | 50 +++++++++++++---------------------------
 arch/s390/kvm/kvm-s390.h         | 29 ++++++++++++++++++++++-
 arch/s390/kvm/sigp.c             |  4 ++--
 6 files changed, 62 insertions(+), 54 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/include/asm/kvm_host.h b/arch/s390/include/asm/kvm_host.h
index 0a784f6f9c9..75535d4d7a0 100644
--- a/arch/s390/include/asm/kvm_host.h
+++ b/arch/s390/include/asm/kvm_host.h
@@ -1,7 +1,7 @@
 /*
  * asm-s390/kvm_host.h - definition for kernel virtual machines on s390
  *
- * Copyright IBM Corp. 2008
+ * Copyright IBM Corp. 2008,2009
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License (version 2 only)
@@ -228,8 +228,6 @@ struct kvm_vm_stat {
 };
 
 struct kvm_arch{
-	unsigned long guest_origin;
-	unsigned long guest_memsize;
 	struct sca_block *sca;
 	debug_info_t *dbf;
 	struct kvm_s390_float_interrupt float_int;
diff --git a/arch/s390/kvm/gaccess.h b/arch/s390/kvm/gaccess.h
index ed60f3a74a8..03c716a0f01 100644
--- a/arch/s390/kvm/gaccess.h
+++ b/arch/s390/kvm/gaccess.h
@@ -1,7 +1,7 @@
 /*
  * gaccess.h -  access guest memory
  *
- * Copyright IBM Corp. 2008
+ * Copyright IBM Corp. 2008,2009
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License (version 2 only)
@@ -16,13 +16,14 @@
 #include <linux/compiler.h>
 #include <linux/kvm_host.h>
 #include <asm/uaccess.h>
+#include "kvm-s390.h"
 
 static inline void __user *__guestaddr_to_user(struct kvm_vcpu *vcpu,
 					       unsigned long guestaddr)
 {
 	unsigned long prefix  = vcpu->arch.sie_block->prefix;
-	unsigned long origin  = vcpu->kvm->arch.guest_origin;
-	unsigned long memsize = vcpu->kvm->arch.guest_memsize;
+	unsigned long origin  = vcpu->arch.sie_block->gmsor;
+	unsigned long memsize = kvm_s390_vcpu_get_memsize(vcpu);
 
 	if (guestaddr < 2 * PAGE_SIZE)
 		guestaddr += prefix;
@@ -158,8 +159,8 @@ static inline int copy_to_guest(struct kvm_vcpu *vcpu, unsigned long guestdest,
 				const void *from, unsigned long n)
 {
 	unsigned long prefix  = vcpu->arch.sie_block->prefix;
-	unsigned long origin  = vcpu->kvm->arch.guest_origin;
-	unsigned long memsize = vcpu->kvm->arch.guest_memsize;
+	unsigned long origin  = vcpu->arch.sie_block->gmsor;
+	unsigned long memsize = kvm_s390_vcpu_get_memsize(vcpu);
 
 	if ((guestdest < 2 * PAGE_SIZE) && (guestdest + n > 2 * PAGE_SIZE))
 		goto slowpath;
@@ -209,8 +210,8 @@ static inline int copy_from_guest(struct kvm_vcpu *vcpu, void *to,
 				  unsigned long guestsrc, unsigned long n)
 {
 	unsigned long prefix  = vcpu->arch.sie_block->prefix;
-	unsigned long origin  = vcpu->kvm->arch.guest_origin;
-	unsigned long memsize = vcpu->kvm->arch.guest_memsize;
+	unsigned long origin  = vcpu->arch.sie_block->gmsor;
+	unsigned long memsize = kvm_s390_vcpu_get_memsize(vcpu);
 
 	if ((guestsrc < 2 * PAGE_SIZE) && (guestsrc + n > 2 * PAGE_SIZE))
 		goto slowpath;
@@ -244,8 +245,8 @@ static inline int copy_to_guest_absolute(struct kvm_vcpu *vcpu,
 					 unsigned long guestdest,
 					 const void *from, unsigned long n)
 {
-	unsigned long origin  = vcpu->kvm->arch.guest_origin;
-	unsigned long memsize = vcpu->kvm->arch.guest_memsize;
+	unsigned long origin  = vcpu->arch.sie_block->gmsor;
+	unsigned long memsize = kvm_s390_vcpu_get_memsize(vcpu);
 
 	if (guestdest + n > memsize)
 		return -EFAULT;
@@ -262,8 +263,8 @@ static inline int copy_from_guest_absolute(struct kvm_vcpu *vcpu, void *to,
 					   unsigned long guestsrc,
 					   unsigned long n)
 {
-	unsigned long origin  = vcpu->kvm->arch.guest_origin;
-	unsigned long memsize = vcpu->kvm->arch.guest_memsize;
+	unsigned long origin  = vcpu->arch.sie_block->gmsor;
+	unsigned long memsize = kvm_s390_vcpu_get_memsize(vcpu);
 
 	if (guestsrc + n > memsize)
 		return -EFAULT;
diff --git a/arch/s390/kvm/intercept.c b/arch/s390/kvm/intercept.c
index 0732ab4305f..ba9d8a7bc1a 100644
--- a/arch/s390/kvm/intercept.c
+++ b/arch/s390/kvm/intercept.c
@@ -1,7 +1,7 @@
 /*
  * intercept.c - in-kernel handling for sie intercepts
  *
- * Copyright IBM Corp. 2008
+ * Copyright IBM Corp. 2008,2009
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License (version 2 only)
@@ -164,9 +164,9 @@ static int handle_validity(struct kvm_vcpu *vcpu)
 
 	vcpu->stat.exit_validity++;
 	if ((viwhy == 0x37) && (vcpu->arch.sie_block->prefix
-		<= vcpu->kvm->arch.guest_memsize - 2*PAGE_SIZE)){
+		<= kvm_s390_vcpu_get_memsize(vcpu) - 2*PAGE_SIZE)) {
 		rc = fault_in_pages_writeable((char __user *)
-			 vcpu->kvm->arch.guest_origin +
+			 vcpu->arch.sie_block->gmsor +
 			 vcpu->arch.sie_block->prefix,
 			 2*PAGE_SIZE);
 		if (rc)
diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index 5c1c3025900..098bfa6fbdf 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -1,7 +1,7 @@
 /*
  * s390host.c --  hosting zSeries kernel virtual machines
  *
- * Copyright IBM Corp. 2008
+ * Copyright IBM Corp. 2008,2009
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License (version 2 only)
@@ -10,6 +10,7 @@
  *    Author(s): Carsten Otte <cotte@de.ibm.com>
  *               Christian Borntraeger <borntraeger@de.ibm.com>
  *               Heiko Carstens <heiko.carstens@de.ibm.com>
+ *               Christian Ehrhardt <ehrhardt@de.ibm.com>
  */
 
 #include <linux/compiler.h>
@@ -278,16 +279,10 @@ static void kvm_s390_vcpu_initial_reset(struct kvm_vcpu *vcpu)
 	vcpu->arch.sie_block->gbea = 1;
 }
 
-/* The current code can have up to 256 pages for virtio */
-#define VIRTIODESCSPACE (256ul * 4096ul)
-
 int kvm_arch_vcpu_setup(struct kvm_vcpu *vcpu)
 {
 	atomic_set(&vcpu->arch.sie_block->cpuflags, CPUSTAT_ZARCH);
-	vcpu->arch.sie_block->gmslm = vcpu->kvm->arch.guest_memsize +
-				      vcpu->kvm->arch.guest_origin +
-				      VIRTIODESCSPACE - 1ul;
-	vcpu->arch.sie_block->gmsor = vcpu->kvm->arch.guest_origin;
+	set_bit(KVM_REQ_MMU_RELOAD, &vcpu->requests);
 	vcpu->arch.sie_block->ecb   = 2;
 	vcpu->arch.sie_block->eca   = 0xC1002001U;
 	vcpu->arch.sie_block->fac   = (int) (long) facilities;
@@ -491,9 +486,14 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	vcpu_load(vcpu);
 
 rerun_vcpu:
+	if (vcpu->requests)
+		if (test_and_clear_bit(KVM_REQ_MMU_RELOAD, &vcpu->requests))
+			kvm_s390_vcpu_set_mem(vcpu);
+
 	/* verify, that memory has been registered */
-	if (!vcpu->kvm->arch.guest_memsize) {
+	if (!vcpu->arch.sie_block->gmslm) {
 		vcpu_put(vcpu);
+		VCPU_EVENT(vcpu, 3, "%s", "no memory registered to run vcpu");
 		return -EINVAL;
 	}
 
@@ -691,7 +691,7 @@ int kvm_arch_set_memory_region(struct kvm *kvm,
 	   vmas. It is okay to mmap() and munmap() stuff in this slot after
 	   doing this call at any time */
 
-	if (mem->slot || kvm->arch.guest_memsize)
+	if (mem->slot)
 		return -EINVAL;
 
 	if (mem->guest_phys_addr)
@@ -706,36 +706,18 @@ int kvm_arch_set_memory_region(struct kvm *kvm,
 	if (!user_alloc)
 		return -EINVAL;
 
-	/* lock all vcpus */
-	for (i = 0; i < KVM_MAX_VCPUS; ++i) {
-		if (!kvm->vcpus[i])
-			continue;
-		if (!mutex_trylock(&kvm->vcpus[i]->mutex))
-			goto fail_out;
-	}
-
-	kvm->arch.guest_origin = mem->userspace_addr;
-	kvm->arch.guest_memsize = mem->memory_size;
-
-	/* update sie control blocks, and unlock all vcpus */
+	/* request update of sie control block for all available vcpus */
 	for (i = 0; i < KVM_MAX_VCPUS; ++i) {
 		if (kvm->vcpus[i]) {
-			kvm->vcpus[i]->arch.sie_block->gmsor =
-				kvm->arch.guest_origin;
-			kvm->vcpus[i]->arch.sie_block->gmslm =
-				kvm->arch.guest_memsize +
-				kvm->arch.guest_origin +
-				VIRTIODESCSPACE - 1ul;
-			mutex_unlock(&kvm->vcpus[i]->mutex);
+			if (test_and_set_bit(KVM_REQ_MMU_RELOAD,
+						&kvm->vcpus[i]->requests))
+				continue;
+			kvm_s390_inject_sigp_stop(kvm->vcpus[i],
+						  ACTION_RELOADVCPU_ON_STOP);
 		}
 	}
 
 	return 0;
-
-fail_out:
-	for (; i >= 0; i--)
-		mutex_unlock(&kvm->vcpus[i]->mutex);
-	return -EINVAL;
 }
 
 void kvm_arch_flush_shadow(struct kvm *kvm)
diff --git a/arch/s390/kvm/kvm-s390.h b/arch/s390/kvm/kvm-s390.h
index 2072cd4a013..ec5eee7c25d 100644
--- a/arch/s390/kvm/kvm-s390.h
+++ b/arch/s390/kvm/kvm-s390.h
@@ -1,7 +1,7 @@
 /*
  * kvm_s390.h -  definition for kvm on s390
  *
- * Copyright IBM Corp. 2008
+ * Copyright IBM Corp. 2008,2009
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License (version 2 only)
@@ -9,6 +9,7 @@
  *
  *    Author(s): Carsten Otte <cotte@de.ibm.com>
  *               Christian Borntraeger <borntraeger@de.ibm.com>
+ *               Christian Ehrhardt <ehrhardt@de.ibm.com>
  */
 
 #ifndef ARCH_S390_KVM_S390_H
@@ -18,6 +19,9 @@
 #include <linux/kvm.h>
 #include <linux/kvm_host.h>
 
+/* The current code can have up to 256 pages for virtio */
+#define VIRTIODESCSPACE (256ul * 4096ul)
+
 typedef int (*intercept_handler_t)(struct kvm_vcpu *vcpu);
 
 /* negativ values are error codes, positive values for internal conditions */
@@ -54,6 +58,29 @@ int kvm_s390_inject_vcpu(struct kvm_vcpu *vcpu,
 int kvm_s390_inject_program_int(struct kvm_vcpu *vcpu, u16 code);
 int kvm_s390_inject_sigp_stop(struct kvm_vcpu *vcpu, int action);
 
+static inline int kvm_s390_vcpu_get_memsize(struct kvm_vcpu *vcpu)
+{
+	return vcpu->arch.sie_block->gmslm
+		- vcpu->arch.sie_block->gmsor
+		- VIRTIODESCSPACE + 1ul;
+}
+
+static inline void kvm_s390_vcpu_set_mem(struct kvm_vcpu *vcpu)
+{
+	struct kvm_memory_slot *mem;
+
+	down_read(&vcpu->kvm->slots_lock);
+	mem = &vcpu->kvm->memslots[0];
+
+	vcpu->arch.sie_block->gmsor = mem->userspace_addr;
+	vcpu->arch.sie_block->gmslm =
+		mem->userspace_addr +
+		(mem->npages << PAGE_SHIFT) +
+		VIRTIODESCSPACE - 1ul;
+
+	up_read(&vcpu->kvm->slots_lock);
+}
+
 /* implemented in priv.c */
 int kvm_s390_handle_b2(struct kvm_vcpu *vcpu);
 
diff --git a/arch/s390/kvm/sigp.c b/arch/s390/kvm/sigp.c
index 21897b0f8a3..40c8c6748cf 100644
--- a/arch/s390/kvm/sigp.c
+++ b/arch/s390/kvm/sigp.c
@@ -189,9 +189,9 @@ static int __sigp_set_prefix(struct kvm_vcpu *vcpu, u16 cpu_addr, u32 address,
 	/* make sure that the new value is valid memory */
 	address = address & 0x7fffe000u;
 	if ((copy_from_guest(vcpu, &tmp,
-		(u64) (address + vcpu->kvm->arch.guest_origin) , 1)) ||
+		(u64) (address + vcpu->arch.sie_block->gmsor) , 1)) ||
 	   (copy_from_guest(vcpu, &tmp, (u64) (address +
-			vcpu->kvm->arch.guest_origin + PAGE_SIZE), 1))) {
+			vcpu->arch.sie_block->gmsor + PAGE_SIZE), 1))) {
 		*reg |= SIGP_STAT_INVALID_PARAMETER;
 		return 1; /* invalid parameter */
 	}
-- 
cgit v1.2.3


From 017cb99e875f2d8ff375cbb576c794b081cd0bd5 Mon Sep 17 00:00:00 2001
From: Andre Przywara <andre.przywara@amd.com>
Date: Thu, 28 May 2009 11:56:31 +0200
Subject: KVM: SVM: use explicit 64bit storage for sysenter values

Since AMD does not support sysenter in 64bit mode, the VMCB fields storing
the MSRs are truncated to 32bit upon VMRUN/#VMEXIT. So store the values
in a separate 64bit storage to avoid truncation.

[andre: fix amd->amd migration]

Signed-off-by: Christoph Egger <christoph.egger@amd.com>
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/kvm_svm.h | 2 ++
 arch/x86/kvm/svm.c     | 8 ++++----
 2 files changed, 6 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/kvm_svm.h b/arch/x86/kvm/kvm_svm.h
index ed66e4c078d..6f275b4cf62 100644
--- a/arch/x86/kvm/kvm_svm.h
+++ b/arch/x86/kvm/kvm_svm.h
@@ -27,6 +27,8 @@ struct vcpu_svm {
 	unsigned long vmcb_pa;
 	struct svm_cpu_data *svm_data;
 	uint64_t asid_generation;
+	uint64_t sysenter_esp;
+	uint64_t sysenter_eip;
 
 	u64 next_rip;
 
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 48b22c9892d..e3e7edca35d 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -367,8 +367,6 @@ static void svm_vcpu_init_msrpm(u32 *msrpm)
 #endif
 	set_msr_interception(msrpm, MSR_K6_STAR, 1, 1);
 	set_msr_interception(msrpm, MSR_IA32_SYSENTER_CS, 1, 1);
-	set_msr_interception(msrpm, MSR_IA32_SYSENTER_ESP, 1, 1);
-	set_msr_interception(msrpm, MSR_IA32_SYSENTER_EIP, 1, 1);
 }
 
 static void svm_enable_lbrv(struct vcpu_svm *svm)
@@ -1981,10 +1979,10 @@ static int svm_get_msr(struct kvm_vcpu *vcpu, unsigned ecx, u64 *data)
 		*data = svm->vmcb->save.sysenter_cs;
 		break;
 	case MSR_IA32_SYSENTER_EIP:
-		*data = svm->vmcb->save.sysenter_eip;
+		*data = svm->sysenter_eip;
 		break;
 	case MSR_IA32_SYSENTER_ESP:
-		*data = svm->vmcb->save.sysenter_esp;
+		*data = svm->sysenter_esp;
 		break;
 	/* Nobody will change the following 5 values in the VMCB so
 	   we can safely return them on rdmsr. They will always be 0
@@ -2071,9 +2069,11 @@ static int svm_set_msr(struct kvm_vcpu *vcpu, unsigned ecx, u64 data)
 		svm->vmcb->save.sysenter_cs = data;
 		break;
 	case MSR_IA32_SYSENTER_EIP:
+		svm->sysenter_eip = data;
 		svm->vmcb->save.sysenter_eip = data;
 		break;
 	case MSR_IA32_SYSENTER_ESP:
+		svm->sysenter_esp = data;
 		svm->vmcb->save.sysenter_esp = data;
 		break;
 	case MSR_IA32_DEBUGCTLMSR:
-- 
cgit v1.2.3


From 6c8166a77c98f473eb91e96a61c3cf78ac617278 Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Sun, 31 May 2009 18:15:37 +0300
Subject: KVM: SVM: Fold kvm_svm.h info svm.c

kvm_svm.h is only included from svm.c, so fold it in.

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/kvm_svm.h | 53 --------------------------------------------------
 arch/x86/kvm/svm.c     | 41 +++++++++++++++++++++++++++++++++++++-
 2 files changed, 40 insertions(+), 54 deletions(-)
 delete mode 100644 arch/x86/kvm/kvm_svm.h

(limited to 'arch')

diff --git a/arch/x86/kvm/kvm_svm.h b/arch/x86/kvm/kvm_svm.h
deleted file mode 100644
index 6f275b4cf62..00000000000
--- a/arch/x86/kvm/kvm_svm.h
+++ /dev/null
@@ -1,53 +0,0 @@
-#ifndef __KVM_SVM_H
-#define __KVM_SVM_H
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/list.h>
-#include <linux/kvm_host.h>
-#include <asm/msr.h>
-
-#include <asm/svm.h>
-
-static const u32 host_save_user_msrs[] = {
-#ifdef CONFIG_X86_64
-	MSR_STAR, MSR_LSTAR, MSR_CSTAR, MSR_SYSCALL_MASK, MSR_KERNEL_GS_BASE,
-	MSR_FS_BASE,
-#endif
-	MSR_IA32_SYSENTER_CS, MSR_IA32_SYSENTER_ESP, MSR_IA32_SYSENTER_EIP,
-};
-
-#define NR_HOST_SAVE_USER_MSRS ARRAY_SIZE(host_save_user_msrs)
-
-struct kvm_vcpu;
-
-struct vcpu_svm {
-	struct kvm_vcpu vcpu;
-	struct vmcb *vmcb;
-	unsigned long vmcb_pa;
-	struct svm_cpu_data *svm_data;
-	uint64_t asid_generation;
-	uint64_t sysenter_esp;
-	uint64_t sysenter_eip;
-
-	u64 next_rip;
-
-	u64 host_user_msrs[NR_HOST_SAVE_USER_MSRS];
-	u64 host_gs_base;
-	unsigned long host_cr2;
-
-	u32 *msrpm;
-	struct vmcb *hsave;
-	u64 hsave_msr;
-
-	u64 nested_vmcb;
-
-	/* These are the merged vectors */
-	u32 *nested_msrpm;
-
-	/* gpa pointers to the real vectors */
-	u64 nested_vmcb_msrpm;
-};
-
-#endif
-
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index e3e7edca35d..522e69597a1 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -15,7 +15,6 @@
  */
 #include <linux/kvm_host.h>
 
-#include "kvm_svm.h"
 #include "irq.h"
 #include "mmu.h"
 #include "kvm_cache_regs.h"
@@ -57,6 +56,46 @@ MODULE_LICENSE("GPL");
 #define nsvm_printk(fmt, args...) do {} while(0)
 #endif
 
+static const u32 host_save_user_msrs[] = {
+#ifdef CONFIG_X86_64
+	MSR_STAR, MSR_LSTAR, MSR_CSTAR, MSR_SYSCALL_MASK, MSR_KERNEL_GS_BASE,
+	MSR_FS_BASE,
+#endif
+	MSR_IA32_SYSENTER_CS, MSR_IA32_SYSENTER_ESP, MSR_IA32_SYSENTER_EIP,
+};
+
+#define NR_HOST_SAVE_USER_MSRS ARRAY_SIZE(host_save_user_msrs)
+
+struct kvm_vcpu;
+
+struct vcpu_svm {
+	struct kvm_vcpu vcpu;
+	struct vmcb *vmcb;
+	unsigned long vmcb_pa;
+	struct svm_cpu_data *svm_data;
+	uint64_t asid_generation;
+	uint64_t sysenter_esp;
+	uint64_t sysenter_eip;
+
+	u64 next_rip;
+
+	u64 host_user_msrs[NR_HOST_SAVE_USER_MSRS];
+	u64 host_gs_base;
+	unsigned long host_cr2;
+
+	u32 *msrpm;
+	struct vmcb *hsave;
+	u64 hsave_msr;
+
+	u64 nested_vmcb;
+
+	/* These are the merged vectors */
+	u32 *nested_msrpm;
+
+	/* gpa pointers to the real vectors */
+	u64 nested_vmcb_msrpm;
+};
+
 /* enable NPT for AMD64 and X86 with PAE */
 #if defined(CONFIG_X86_64) || defined(CONFIG_X86_PAE)
 static bool npt_enabled = true;
-- 
cgit v1.2.3


From 2986b8c72c272ea58edd37903b042c6da985627d Mon Sep 17 00:00:00 2001
From: Stephen Rothwell <sfr@canb.auug.org.au>
Date: Tue, 2 Jun 2009 11:46:14 +1000
Subject: KVM: powerpc: fix some init/exit annotations

Fixes a couple of warnings like this one:

WARNING: arch/powerpc/kvm/kvm-440.o(.text+0x1e8c): Section mismatch in reference from the function kvmppc_44x_exit() to the function .exit.text:kvmppc_booke_exit()
The function kvmppc_44x_exit() references a function in an exit section.
Often the function kvmppc_booke_exit() has valid usage outside the exit section
and the fix is to remove the __exit annotation of kvmppc_booke_exit.

Also add some __init annotations on obvious routines.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/powerpc/kvm/44x.c   | 4 ++--
 arch/powerpc/kvm/booke.c | 2 +-
 arch/powerpc/kvm/e500.c  | 4 ++--
 3 files changed, 5 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kvm/44x.c b/arch/powerpc/kvm/44x.c
index 0cef809cec2..f4d1b55aa70 100644
--- a/arch/powerpc/kvm/44x.c
+++ b/arch/powerpc/kvm/44x.c
@@ -138,7 +138,7 @@ void kvmppc_core_vcpu_free(struct kvm_vcpu *vcpu)
 	kmem_cache_free(kvm_vcpu_cache, vcpu_44x);
 }
 
-static int kvmppc_44x_init(void)
+static int __init kvmppc_44x_init(void)
 {
 	int r;
 
@@ -149,7 +149,7 @@ static int kvmppc_44x_init(void)
 	return kvm_init(NULL, sizeof(struct kvmppc_vcpu_44x), THIS_MODULE);
 }
 
-static void kvmppc_44x_exit(void)
+static void __exit kvmppc_44x_exit(void)
 {
 	kvmppc_booke_exit();
 }
diff --git a/arch/powerpc/kvm/booke.c b/arch/powerpc/kvm/booke.c
index 642e4204cf2..e7bf4d02948 100644
--- a/arch/powerpc/kvm/booke.c
+++ b/arch/powerpc/kvm/booke.c
@@ -520,7 +520,7 @@ int kvm_arch_vcpu_ioctl_translate(struct kvm_vcpu *vcpu,
 	return kvmppc_core_vcpu_translate(vcpu, tr);
 }
 
-int kvmppc_booke_init(void)
+int __init kvmppc_booke_init(void)
 {
 	unsigned long ivor[16];
 	unsigned long max_ivor = 0;
diff --git a/arch/powerpc/kvm/e500.c b/arch/powerpc/kvm/e500.c
index d8067fd81cd..674e796f7aa 100644
--- a/arch/powerpc/kvm/e500.c
+++ b/arch/powerpc/kvm/e500.c
@@ -132,7 +132,7 @@ void kvmppc_core_vcpu_free(struct kvm_vcpu *vcpu)
 	kmem_cache_free(kvm_vcpu_cache, vcpu_e500);
 }
 
-static int kvmppc_e500_init(void)
+static int __init kvmppc_e500_init(void)
 {
 	int r, i;
 	unsigned long ivor[3];
@@ -160,7 +160,7 @@ static int kvmppc_e500_init(void)
 	return kvm_init(NULL, sizeof(struct kvmppc_vcpu_e500), THIS_MODULE);
 }
 
-static void kvmppc_e500_exit(void)
+static void __init kvmppc_e500_exit(void)
 {
 	kvmppc_booke_exit();
 }
-- 
cgit v1.2.3


From d76685c4a074041ed168e0b04dd604c3df5dcaa5 Mon Sep 17 00:00:00 2001
From: Gregory Haskins <ghaskins@novell.com>
Date: Mon, 1 Jun 2009 12:54:50 -0400
Subject: KVM: cleanup io_device code

We modernize the io_device code so that we use container_of() instead of
dev->private, and move the vtable to a separate ops structure
(theoretically allows better caching for multiple instances of the same
ops structure)

Signed-off-by: Gregory Haskins <ghaskins@novell.com>
Acked-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/i8254.c | 40 ++++++++++++++++++++++++++++------------
 arch/x86/kvm/i8259.c | 20 ++++++++++++++------
 arch/x86/kvm/lapic.c | 22 +++++++++++++++-------
 arch/x86/kvm/x86.c   |  2 +-
 4 files changed, 58 insertions(+), 26 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/i8254.c b/arch/x86/kvm/i8254.c
index 0990bc9aac1..e800d2d6626 100644
--- a/arch/x86/kvm/i8254.c
+++ b/arch/x86/kvm/i8254.c
@@ -350,10 +350,20 @@ void kvm_pit_load_count(struct kvm *kvm, int channel, u32 val)
 	mutex_unlock(&kvm->arch.vpit->pit_state.lock);
 }
 
+static inline struct kvm_pit *dev_to_pit(struct kvm_io_device *dev)
+{
+	return container_of(dev, struct kvm_pit, dev);
+}
+
+static inline struct kvm_pit *speaker_to_pit(struct kvm_io_device *dev)
+{
+	return container_of(dev, struct kvm_pit, speaker_dev);
+}
+
 static void pit_ioport_write(struct kvm_io_device *this,
 			     gpa_t addr, int len, const void *data)
 {
-	struct kvm_pit *pit = (struct kvm_pit *)this->private;
+	struct kvm_pit *pit = dev_to_pit(this);
 	struct kvm_kpit_state *pit_state = &pit->pit_state;
 	struct kvm *kvm = pit->kvm;
 	int channel, access;
@@ -426,7 +436,7 @@ static void pit_ioport_write(struct kvm_io_device *this,
 static void pit_ioport_read(struct kvm_io_device *this,
 			    gpa_t addr, int len, void *data)
 {
-	struct kvm_pit *pit = (struct kvm_pit *)this->private;
+	struct kvm_pit *pit = dev_to_pit(this);
 	struct kvm_kpit_state *pit_state = &pit->pit_state;
 	struct kvm *kvm = pit->kvm;
 	int ret, count;
@@ -497,7 +507,7 @@ static int pit_in_range(struct kvm_io_device *this, gpa_t addr,
 static void speaker_ioport_write(struct kvm_io_device *this,
 				 gpa_t addr, int len, const void *data)
 {
-	struct kvm_pit *pit = (struct kvm_pit *)this->private;
+	struct kvm_pit *pit = speaker_to_pit(this);
 	struct kvm_kpit_state *pit_state = &pit->pit_state;
 	struct kvm *kvm = pit->kvm;
 	u32 val = *(u32 *) data;
@@ -511,7 +521,7 @@ static void speaker_ioport_write(struct kvm_io_device *this,
 static void speaker_ioport_read(struct kvm_io_device *this,
 				gpa_t addr, int len, void *data)
 {
-	struct kvm_pit *pit = (struct kvm_pit *)this->private;
+	struct kvm_pit *pit = speaker_to_pit(this);
 	struct kvm_kpit_state *pit_state = &pit->pit_state;
 	struct kvm *kvm = pit->kvm;
 	unsigned int refresh_clock;
@@ -563,6 +573,18 @@ static void pit_mask_notifer(struct kvm_irq_mask_notifier *kimn, bool mask)
 	}
 }
 
+static const struct kvm_io_device_ops pit_dev_ops = {
+	.read     = pit_ioport_read,
+	.write    = pit_ioport_write,
+	.in_range = pit_in_range,
+};
+
+static const struct kvm_io_device_ops speaker_dev_ops = {
+	.read     = speaker_ioport_read,
+	.write    = speaker_ioport_write,
+	.in_range = speaker_in_range,
+};
+
 struct kvm_pit *kvm_create_pit(struct kvm *kvm, u32 flags)
 {
 	struct kvm_pit *pit;
@@ -583,17 +605,11 @@ struct kvm_pit *kvm_create_pit(struct kvm *kvm, u32 flags)
 	spin_lock_init(&pit->pit_state.inject_lock);
 
 	/* Initialize PIO device */
-	pit->dev.read = pit_ioport_read;
-	pit->dev.write = pit_ioport_write;
-	pit->dev.in_range = pit_in_range;
-	pit->dev.private = pit;
+	kvm_iodevice_init(&pit->dev, &pit_dev_ops);
 	kvm_io_bus_register_dev(&kvm->pio_bus, &pit->dev);
 
 	if (flags & KVM_PIT_SPEAKER_DUMMY) {
-		pit->speaker_dev.read = speaker_ioport_read;
-		pit->speaker_dev.write = speaker_ioport_write;
-		pit->speaker_dev.in_range = speaker_in_range;
-		pit->speaker_dev.private = pit;
+		kvm_iodevice_init(&pit->speaker_dev, &speaker_dev_ops);
 		kvm_io_bus_register_dev(&kvm->pio_bus, &pit->speaker_dev);
 	}
 
diff --git a/arch/x86/kvm/i8259.c b/arch/x86/kvm/i8259.c
index 1ccb50c74f1..2520922282d 100644
--- a/arch/x86/kvm/i8259.c
+++ b/arch/x86/kvm/i8259.c
@@ -444,10 +444,15 @@ static int picdev_in_range(struct kvm_io_device *this, gpa_t addr,
 	}
 }
 
+static inline struct kvm_pic *to_pic(struct kvm_io_device *dev)
+{
+	return container_of(dev, struct kvm_pic, dev);
+}
+
 static void picdev_write(struct kvm_io_device *this,
 			 gpa_t addr, int len, const void *val)
 {
-	struct kvm_pic *s = this->private;
+	struct kvm_pic *s = to_pic(this);
 	unsigned char data = *(unsigned char *)val;
 
 	if (len != 1) {
@@ -474,7 +479,7 @@ static void picdev_write(struct kvm_io_device *this,
 static void picdev_read(struct kvm_io_device *this,
 			gpa_t addr, int len, void *val)
 {
-	struct kvm_pic *s = this->private;
+	struct kvm_pic *s = to_pic(this);
 	unsigned char data = 0;
 
 	if (len != 1) {
@@ -516,6 +521,12 @@ static void pic_irq_request(void *opaque, int level)
 	}
 }
 
+static const struct kvm_io_device_ops picdev_ops = {
+	.read     = picdev_read,
+	.write    = picdev_write,
+	.in_range = picdev_in_range,
+};
+
 struct kvm_pic *kvm_create_pic(struct kvm *kvm)
 {
 	struct kvm_pic *s;
@@ -534,10 +545,7 @@ struct kvm_pic *kvm_create_pic(struct kvm *kvm)
 	/*
 	 * Initialize PIO device
 	 */
-	s->dev.read = picdev_read;
-	s->dev.write = picdev_write;
-	s->dev.in_range = picdev_in_range;
-	s->dev.private = s;
+	kvm_iodevice_init(&s->dev, &picdev_ops);
 	kvm_io_bus_register_dev(&kvm->pio_bus, &s->dev);
 	return s;
 }
diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index ae99d83f81a..4bfd458a4f3 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -522,10 +522,15 @@ static u32 __apic_read(struct kvm_lapic *apic, unsigned int offset)
 	return val;
 }
 
+static inline struct kvm_lapic *to_lapic(struct kvm_io_device *dev)
+{
+	return container_of(dev, struct kvm_lapic, dev);
+}
+
 static void apic_mmio_read(struct kvm_io_device *this,
 			   gpa_t address, int len, void *data)
 {
-	struct kvm_lapic *apic = (struct kvm_lapic *)this->private;
+	struct kvm_lapic *apic = to_lapic(this);
 	unsigned int offset = address - apic->base_address;
 	unsigned char alignment = offset & 0xf;
 	u32 result;
@@ -606,7 +611,7 @@ static void apic_manage_nmi_watchdog(struct kvm_lapic *apic, u32 lvt0_val)
 static void apic_mmio_write(struct kvm_io_device *this,
 			    gpa_t address, int len, const void *data)
 {
-	struct kvm_lapic *apic = (struct kvm_lapic *)this->private;
+	struct kvm_lapic *apic = to_lapic(this);
 	unsigned int offset = address - apic->base_address;
 	unsigned char alignment = offset & 0xf;
 	u32 val;
@@ -723,7 +728,7 @@ static void apic_mmio_write(struct kvm_io_device *this,
 static int apic_mmio_range(struct kvm_io_device *this, gpa_t addr,
 			   int len, int size)
 {
-	struct kvm_lapic *apic = (struct kvm_lapic *)this->private;
+	struct kvm_lapic *apic = to_lapic(this);
 	int ret = 0;
 
 
@@ -917,6 +922,12 @@ static struct kvm_timer_ops lapic_timer_ops = {
 	.is_periodic = lapic_is_periodic,
 };
 
+static const struct kvm_io_device_ops apic_mmio_ops = {
+	.read     = apic_mmio_read,
+	.write    = apic_mmio_write,
+	.in_range = apic_mmio_range,
+};
+
 int kvm_create_lapic(struct kvm_vcpu *vcpu)
 {
 	struct kvm_lapic *apic;
@@ -951,10 +962,7 @@ int kvm_create_lapic(struct kvm_vcpu *vcpu)
 	vcpu->arch.apic_base = APIC_DEFAULT_PHYS_BASE;
 
 	kvm_lapic_reset(vcpu);
-	apic->dev.read = apic_mmio_read;
-	apic->dev.write = apic_mmio_write;
-	apic->dev.in_range = apic_mmio_range;
-	apic->dev.private = apic;
+	kvm_iodevice_init(&apic->dev, &apic_mmio_ops);
 
 	return 0;
 nomem_free_apic:
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 5eb3b8dd74b..75e9df09784 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -2264,7 +2264,7 @@ static struct kvm_io_device *vcpu_find_pervcpu_dev(struct kvm_vcpu *vcpu,
 
 	if (vcpu->arch.apic) {
 		dev = &vcpu->arch.apic->dev;
-		if (dev->in_range(dev, addr, len, is_write))
+		if (kvm_iodevice_in_range(dev, addr, len, is_write))
 			return dev;
 	}
 	return NULL;
-- 
cgit v1.2.3


From 6b66ac1ae3328177305a2600eb85b7446f41fdc9 Mon Sep 17 00:00:00 2001
From: Gregory Haskins <ghaskins@novell.com>
Date: Mon, 1 Jun 2009 12:54:56 -0400
Subject: KVM: do not register i8254 PIO regions until we are initialized

We currently publish the i8254 resources to the pio_bus before the devices
are fully initialized.  Since we hold the pit_lock, its probably not
a real issue.  But lets clean this up anyway.

Reported-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Gregory Haskins <ghaskins@novell.com>
Acked-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/i8254.c | 17 ++++++++---------
 1 file changed, 8 insertions(+), 9 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/i8254.c b/arch/x86/kvm/i8254.c
index e800d2d6626..977af7ab819 100644
--- a/arch/x86/kvm/i8254.c
+++ b/arch/x86/kvm/i8254.c
@@ -604,15 +604,6 @@ struct kvm_pit *kvm_create_pit(struct kvm *kvm, u32 flags)
 	mutex_lock(&pit->pit_state.lock);
 	spin_lock_init(&pit->pit_state.inject_lock);
 
-	/* Initialize PIO device */
-	kvm_iodevice_init(&pit->dev, &pit_dev_ops);
-	kvm_io_bus_register_dev(&kvm->pio_bus, &pit->dev);
-
-	if (flags & KVM_PIT_SPEAKER_DUMMY) {
-		kvm_iodevice_init(&pit->speaker_dev, &speaker_dev_ops);
-		kvm_io_bus_register_dev(&kvm->pio_bus, &pit->speaker_dev);
-	}
-
 	kvm->arch.vpit = pit;
 	pit->kvm = kvm;
 
@@ -631,6 +622,14 @@ struct kvm_pit *kvm_create_pit(struct kvm *kvm, u32 flags)
 	pit->mask_notifier.func = pit_mask_notifer;
 	kvm_register_irq_mask_notifier(kvm, 0, &pit->mask_notifier);
 
+	kvm_iodevice_init(&pit->dev, &pit_dev_ops);
+	kvm_io_bus_register_dev(&kvm->pio_bus, &pit->dev);
+
+	if (flags & KVM_PIT_SPEAKER_DUMMY) {
+		kvm_iodevice_init(&pit->speaker_dev, &speaker_dev_ops);
+		kvm_io_bus_register_dev(&kvm->pio_bus, &pit->speaker_dev);
+	}
+
 	return pit;
 }
 
-- 
cgit v1.2.3


From 2d84e993a8947dbeb6b416555940d97522330846 Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Sun, 31 May 2009 18:29:59 +0300
Subject: KVM: VMX: Avoid duplicate ept tlb flush when setting cr3

vmx_set_cr3() will call vmx_tlb_flush(), which will flush the ept context.
So there is no need to call ept_sync_context() explicitly.

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/vmx.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index c14bffc8c1f..ea0e1d5ebe7 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -1651,7 +1651,6 @@ static void vmx_set_cr3(struct kvm_vcpu *vcpu, unsigned long cr3)
 	if (enable_ept) {
 		eptp = construct_eptp(cr3);
 		vmcs_write64(EPT_POINTER, eptp);
-		ept_sync_context(eptp);
 		ept_load_pdptrs(vcpu);
 		guest_cr3 = is_paging(vcpu) ? vcpu->arch.cr3 :
 			VMX_EPT_IDENTITY_PAGETABLE_ADDR;
-- 
cgit v1.2.3


From 8f5d549f028056d6ad6044f2d9e27ecf361d955e Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Sun, 31 May 2009 18:41:29 +0300
Subject: KVM: VMX: Simplify pdptr and cr3 management

Instead of reading the PDPTRs from memory after every exit (which is slow
and wrong, as the PDPTRs are stored on the cpu), sync the PDPTRs from
memory to the VMCS before entry, and from the VMCS to memory after exit.
Do the same for cr3.

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/vmx.c | 21 +++++++++++++++------
 1 file changed, 15 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index ea0e1d5ebe7..752465f98bf 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -1547,10 +1547,6 @@ static void vmx_decache_cr4_guest_bits(struct kvm_vcpu *vcpu)
 static void ept_load_pdptrs(struct kvm_vcpu *vcpu)
 {
 	if (is_paging(vcpu) && is_pae(vcpu) && !is_long_mode(vcpu)) {
-		if (!load_pdptrs(vcpu, vcpu->arch.cr3)) {
-			printk(KERN_ERR "EPT: Fail to load pdptrs!\n");
-			return;
-		}
 		vmcs_write64(GUEST_PDPTR0, vcpu->arch.pdptrs[0]);
 		vmcs_write64(GUEST_PDPTR1, vcpu->arch.pdptrs[1]);
 		vmcs_write64(GUEST_PDPTR2, vcpu->arch.pdptrs[2]);
@@ -1558,6 +1554,16 @@ static void ept_load_pdptrs(struct kvm_vcpu *vcpu)
 	}
 }
 
+static void ept_save_pdptrs(struct kvm_vcpu *vcpu)
+{
+	if (is_paging(vcpu) && is_pae(vcpu) && !is_long_mode(vcpu)) {
+		vcpu->arch.pdptrs[0] = vmcs_read64(GUEST_PDPTR0);
+		vcpu->arch.pdptrs[1] = vmcs_read64(GUEST_PDPTR1);
+		vcpu->arch.pdptrs[2] = vmcs_read64(GUEST_PDPTR2);
+		vcpu->arch.pdptrs[3] = vmcs_read64(GUEST_PDPTR3);
+	}
+}
+
 static void vmx_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4);
 
 static void ept_update_paging_mode_cr0(unsigned long *hw_cr0,
@@ -1651,7 +1657,6 @@ static void vmx_set_cr3(struct kvm_vcpu *vcpu, unsigned long cr3)
 	if (enable_ept) {
 		eptp = construct_eptp(cr3);
 		vmcs_write64(EPT_POINTER, eptp);
-		ept_load_pdptrs(vcpu);
 		guest_cr3 = is_paging(vcpu) ? vcpu->arch.cr3 :
 			VMX_EPT_IDENTITY_PAGETABLE_ADDR;
 	}
@@ -3252,7 +3257,7 @@ static int vmx_handle_exit(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
 	 * to sync with guest real CR3. */
 	if (enable_ept && is_paging(vcpu)) {
 		vcpu->arch.cr3 = vmcs_readl(GUEST_CR3);
-		ept_load_pdptrs(vcpu);
+		ept_save_pdptrs(vcpu);
 	}
 
 	if (unlikely(vmx->fail)) {
@@ -3437,6 +3442,10 @@ static void vmx_vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 {
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
 
+	if (enable_ept && is_paging(vcpu)) {
+		vmcs_writel(GUEST_CR3, vcpu->arch.cr3);
+		ept_load_pdptrs(vcpu);
+	}
 	/* Record the guest's net vcpu time for enforced NMI injections. */
 	if (unlikely(!cpu_has_virtual_nmis() && vmx->soft_vnmi_blocked))
 		vmx->entry_time = ktime_get();
-- 
cgit v1.2.3


From 6de4f3ada40b336522250a7832a0cc4de8856589 Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Sun, 31 May 2009 22:58:47 +0300
Subject: KVM: Cache pdptrs

Instead of reloading the pdptrs on every entry and exit (vmcs writes on vmx,
guest memory access on svm) extract them on demand.

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/include/asm/kvm_host.h |  4 ++++
 arch/x86/kvm/kvm_cache_regs.h   |  9 +++++++++
 arch/x86/kvm/mmu.c              |  7 +++++--
 arch/x86/kvm/paging_tmpl.h      |  2 +-
 arch/x86/kvm/svm.c              | 24 ++++++++++++++++++------
 arch/x86/kvm/vmx.c              | 22 ++++++++++++++++++----
 arch/x86/kvm/x86.c              |  8 ++++++++
 7 files changed, 63 insertions(+), 13 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index 81c68f630b1..1cc901ec4ba 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -120,6 +120,10 @@ enum kvm_reg {
 	NR_VCPU_REGS
 };
 
+enum kvm_reg_ex {
+	VCPU_EXREG_PDPTR = NR_VCPU_REGS,
+};
+
 enum {
 	VCPU_SREG_ES,
 	VCPU_SREG_CS,
diff --git a/arch/x86/kvm/kvm_cache_regs.h b/arch/x86/kvm/kvm_cache_regs.h
index 1ff819dce7d..7bcc5b6a440 100644
--- a/arch/x86/kvm/kvm_cache_regs.h
+++ b/arch/x86/kvm/kvm_cache_regs.h
@@ -29,4 +29,13 @@ static inline void kvm_rip_write(struct kvm_vcpu *vcpu, unsigned long val)
 	kvm_register_write(vcpu, VCPU_REGS_RIP, val);
 }
 
+static inline u64 kvm_pdptr_read(struct kvm_vcpu *vcpu, int index)
+{
+	if (!test_bit(VCPU_EXREG_PDPTR,
+		      (unsigned long *)&vcpu->arch.regs_avail))
+		kvm_x86_ops->cache_reg(vcpu, VCPU_EXREG_PDPTR);
+
+	return vcpu->arch.pdptrs[index];
+}
+
 #endif
diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 0ef5bb2b404..8ee67e3fb9d 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -18,6 +18,7 @@
  */
 
 #include "mmu.h"
+#include "kvm_cache_regs.h"
 
 #include <linux/kvm_host.h>
 #include <linux/types.h>
@@ -1954,6 +1955,7 @@ static int mmu_alloc_roots(struct kvm_vcpu *vcpu)
 	gfn_t root_gfn;
 	struct kvm_mmu_page *sp;
 	int direct = 0;
+	u64 pdptr;
 
 	root_gfn = vcpu->arch.cr3 >> PAGE_SHIFT;
 
@@ -1981,11 +1983,12 @@ static int mmu_alloc_roots(struct kvm_vcpu *vcpu)
 
 		ASSERT(!VALID_PAGE(root));
 		if (vcpu->arch.mmu.root_level == PT32E_ROOT_LEVEL) {
-			if (!is_present_pte(vcpu->arch.pdptrs[i])) {
+			pdptr = kvm_pdptr_read(vcpu, i);
+			if (!is_present_pte(pdptr)) {
 				vcpu->arch.mmu.pae_root[i] = 0;
 				continue;
 			}
-			root_gfn = vcpu->arch.pdptrs[i] >> PAGE_SHIFT;
+			root_gfn = pdptr >> PAGE_SHIFT;
 		} else if (vcpu->arch.mmu.root_level == 0)
 			root_gfn = 0;
 		if (mmu_check_root(vcpu, root_gfn))
diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h
index 67785f63539..4cb1dbfd7c2 100644
--- a/arch/x86/kvm/paging_tmpl.h
+++ b/arch/x86/kvm/paging_tmpl.h
@@ -131,7 +131,7 @@ walk:
 	pte = vcpu->arch.cr3;
 #if PTTYPE == 64
 	if (!is_long_mode(vcpu)) {
-		pte = vcpu->arch.pdptrs[(addr >> 30) & 3];
+		pte = kvm_pdptr_read(vcpu, (addr >> 30) & 3);
 		if (!is_present_pte(pte))
 			goto not_present;
 		--walker->level;
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 522e69597a1..7749b0692cb 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -777,6 +777,18 @@ static void svm_set_rflags(struct kvm_vcpu *vcpu, unsigned long rflags)
 	to_svm(vcpu)->vmcb->save.rflags = rflags;
 }
 
+static void svm_cache_reg(struct kvm_vcpu *vcpu, enum kvm_reg reg)
+{
+	switch (reg) {
+	case VCPU_EXREG_PDPTR:
+		BUG_ON(!npt_enabled);
+		load_pdptrs(vcpu, vcpu->arch.cr3);
+		break;
+	default:
+		BUG();
+	}
+}
+
 static void svm_set_vintr(struct vcpu_svm *svm)
 {
 	svm->vmcb->control.intercept |= 1ULL << INTERCEPT_VINTR;
@@ -2285,12 +2297,6 @@ static int handle_exit(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
 		}
 		vcpu->arch.cr0 = svm->vmcb->save.cr0;
 		vcpu->arch.cr3 = svm->vmcb->save.cr3;
-		if (is_paging(vcpu) && is_pae(vcpu) && !is_long_mode(vcpu)) {
-			if (!load_pdptrs(vcpu, vcpu->arch.cr3)) {
-				kvm_inject_gp(vcpu, 0);
-				return 1;
-			}
-		}
 		if (mmu_reload) {
 			kvm_mmu_reset_context(vcpu);
 			kvm_mmu_load(vcpu);
@@ -2641,6 +2647,11 @@ static void svm_vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 
 	svm->next_rip = 0;
 
+	if (npt_enabled) {
+		vcpu->arch.regs_avail &= ~(1 << VCPU_EXREG_PDPTR);
+		vcpu->arch.regs_dirty &= ~(1 << VCPU_EXREG_PDPTR);
+	}
+
 	svm_complete_interrupts(svm);
 }
 
@@ -2749,6 +2760,7 @@ static struct kvm_x86_ops svm_x86_ops = {
 	.set_gdt = svm_set_gdt,
 	.get_dr = svm_get_dr,
 	.set_dr = svm_set_dr,
+	.cache_reg = svm_cache_reg,
 	.get_rflags = svm_get_rflags,
 	.set_rflags = svm_set_rflags,
 
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 752465f98bf..d726dec6952 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -161,6 +161,8 @@ static struct kvm_vmx_segment_field {
 	VMX_SEGMENT_FIELD(LDTR),
 };
 
+static void ept_save_pdptrs(struct kvm_vcpu *vcpu);
+
 /*
  * Keep MSR_K6_STAR at the end, as setup_msrs() will try to optimize it
  * away by decrementing the array size.
@@ -1047,6 +1049,10 @@ static void vmx_cache_reg(struct kvm_vcpu *vcpu, enum kvm_reg reg)
 	case VCPU_REGS_RIP:
 		vcpu->arch.regs[VCPU_REGS_RIP] = vmcs_readl(GUEST_RIP);
 		break;
+	case VCPU_EXREG_PDPTR:
+		if (enable_ept)
+			ept_save_pdptrs(vcpu);
+		break;
 	default:
 		break;
 	}
@@ -1546,6 +1552,10 @@ static void vmx_decache_cr4_guest_bits(struct kvm_vcpu *vcpu)
 
 static void ept_load_pdptrs(struct kvm_vcpu *vcpu)
 {
+	if (!test_bit(VCPU_EXREG_PDPTR,
+		      (unsigned long *)&vcpu->arch.regs_dirty))
+		return;
+
 	if (is_paging(vcpu) && is_pae(vcpu) && !is_long_mode(vcpu)) {
 		vmcs_write64(GUEST_PDPTR0, vcpu->arch.pdptrs[0]);
 		vmcs_write64(GUEST_PDPTR1, vcpu->arch.pdptrs[1]);
@@ -1562,6 +1572,11 @@ static void ept_save_pdptrs(struct kvm_vcpu *vcpu)
 		vcpu->arch.pdptrs[2] = vmcs_read64(GUEST_PDPTR2);
 		vcpu->arch.pdptrs[3] = vmcs_read64(GUEST_PDPTR3);
 	}
+
+	__set_bit(VCPU_EXREG_PDPTR,
+		  (unsigned long *)&vcpu->arch.regs_avail);
+	__set_bit(VCPU_EXREG_PDPTR,
+		  (unsigned long *)&vcpu->arch.regs_dirty);
 }
 
 static void vmx_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4);
@@ -3255,10 +3270,8 @@ static int vmx_handle_exit(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
 
 	/* Access CR3 don't cause VMExit in paging mode, so we need
 	 * to sync with guest real CR3. */
-	if (enable_ept && is_paging(vcpu)) {
+	if (enable_ept && is_paging(vcpu))
 		vcpu->arch.cr3 = vmcs_readl(GUEST_CR3);
-		ept_save_pdptrs(vcpu);
-	}
 
 	if (unlikely(vmx->fail)) {
 		kvm_run->exit_reason = KVM_EXIT_FAIL_ENTRY;
@@ -3567,7 +3580,8 @@ static void vmx_vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 #endif
 	      );
 
-	vcpu->arch.regs_avail = ~((1 << VCPU_REGS_RIP) | (1 << VCPU_REGS_RSP));
+	vcpu->arch.regs_avail = ~((1 << VCPU_REGS_RIP) | (1 << VCPU_REGS_RSP)
+				  | (1 << VCPU_EXREG_PDPTR));
 	vcpu->arch.regs_dirty = 0;
 
 	get_debugreg(vcpu->arch.dr6, 6);
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 75e9df09784..2ad8c97f58c 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -246,6 +246,10 @@ int load_pdptrs(struct kvm_vcpu *vcpu, unsigned long cr3)
 	ret = 1;
 
 	memcpy(vcpu->arch.pdptrs, pdpte, sizeof(vcpu->arch.pdptrs));
+	__set_bit(VCPU_EXREG_PDPTR,
+		  (unsigned long *)&vcpu->arch.regs_avail);
+	__set_bit(VCPU_EXREG_PDPTR,
+		  (unsigned long *)&vcpu->arch.regs_dirty);
 out:
 
 	return ret;
@@ -261,6 +265,10 @@ static bool pdptrs_changed(struct kvm_vcpu *vcpu)
 	if (is_long_mode(vcpu) || !is_pae(vcpu))
 		return false;
 
+	if (!test_bit(VCPU_EXREG_PDPTR,
+		      (unsigned long *)&vcpu->arch.regs_avail))
+		return true;
+
 	r = kvm_read_guest(vcpu->kvm, vcpu->arch.cr3 & ~31u, pdpte, sizeof(pdpte));
 	if (r < 0)
 		goto out;
-- 
cgit v1.2.3


From 596ae895653fe336b9b5815ad2c175d22bb26f21 Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Wed, 3 Jun 2009 14:12:10 +0300
Subject: KVM: VMX: Fix reporting of unhandled EPT violations

Instead of returning -ENOTSUPP, exit normally but indicate the hardware
exit reason.

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/vmx.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index d726dec6952..959cb59cfae 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -3153,8 +3153,8 @@ static int handle_ept_violation(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 		printk(KERN_ERR "EPT: Exit qualification is 0x%lx\n",
 			(long unsigned int)exit_qualification);
 		kvm_run->exit_reason = KVM_EXIT_UNKNOWN;
-		kvm_run->hw.hardware_exit_reason = 0;
-		return -ENOTSUPP;
+		kvm_run->hw.hardware_exit_reason = EXIT_REASON_EPT_VIOLATION;
+		return 0;
 	}
 
 	gpa = vmcs_read64(GUEST_PHYSICAL_ADDRESS);
-- 
cgit v1.2.3


From 0cfb50e50dd27539fed9ba3cb33b0f22c0cddef0 Mon Sep 17 00:00:00 2001
From: Liu Yu <yu.liu@freescale.com>
Date: Fri, 5 Jun 2009 14:54:29 +0800
Subject: KVM: ppc: e500: Move to Book-3e MMU definitions

According to commit 70fe3af8403f85196bb74f22ce4813db7dfedc1a.

Signed-off-by: Liu Yu <yu.liu@freescale.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/powerpc/kvm/e500_tlb.c | 10 +++++-----
 arch/powerpc/kvm/e500_tlb.h |  6 +++---
 2 files changed, 8 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kvm/e500_tlb.c b/arch/powerpc/kvm/e500_tlb.c
index 0e773fc2d5e..a2048ac095a 100644
--- a/arch/powerpc/kvm/e500_tlb.c
+++ b/arch/powerpc/kvm/e500_tlb.c
@@ -269,7 +269,7 @@ static inline void kvmppc_e500_deliver_tlb_miss(struct kvm_vcpu *vcpu,
 	tlbsel = (vcpu_e500->mas4 >> 28) & 0x1;
 	victim = (tlbsel == 0) ? tlb0_get_next_victim(vcpu_e500) : 0;
 	pidsel = (vcpu_e500->mas4 >> 16) & 0xf;
-	tsized = (vcpu_e500->mas4 >> 8) & 0xf;
+	tsized = (vcpu_e500->mas4 >> 7) & 0x1f;
 
 	vcpu_e500->mas0 = MAS0_TLBSEL(tlbsel) | MAS0_ESEL(victim)
 		| MAS0_NV(vcpu_e500->guest_tlb_nv[tlbsel]);
@@ -309,7 +309,7 @@ static inline void kvmppc_e500_shadow_map(struct kvmppc_vcpu_e500 *vcpu_e500,
 	vcpu_e500->shadow_pages[tlbsel][esel] = new_page;
 
 	/* Force TS=1 IPROT=0 TSIZE=4KB for all guest mappings. */
-	stlbe->mas1 = MAS1_TSIZE(BOOKE_PAGESZ_4K)
+	stlbe->mas1 = MAS1_TSIZE(BOOK3E_PAGESZ_4K)
 		| MAS1_TID(get_tlb_tid(gtlbe)) | MAS1_TS | MAS1_VALID;
 	stlbe->mas2 = (gvaddr & MAS2_EPN)
 		| e500_shadow_mas2_attrib(gtlbe->mas2,
@@ -545,7 +545,7 @@ int kvmppc_e500_emul_tlbwe(struct kvm_vcpu *vcpu)
 		case 0:
 			/* TLB0 */
 			gtlbe->mas1 &= ~MAS1_TSIZE(~0);
-			gtlbe->mas1 |= MAS1_TSIZE(BOOKE_PAGESZ_4K);
+			gtlbe->mas1 |= MAS1_TSIZE(BOOK3E_PAGESZ_4K);
 
 			stlbsel = 0;
 			sesel = kvmppc_e500_stlbe_map(vcpu_e500, 0, esel);
@@ -679,14 +679,14 @@ void kvmppc_e500_tlb_setup(struct kvmppc_vcpu_e500 *vcpu_e500)
 
 	/* Insert large initial mapping for guest. */
 	tlbe = &vcpu_e500->guest_tlb[1][0];
-	tlbe->mas1 = MAS1_VALID | MAS1_TSIZE(BOOKE_PAGESZ_256M);
+	tlbe->mas1 = MAS1_VALID | MAS1_TSIZE(BOOK3E_PAGESZ_256M);
 	tlbe->mas2 = 0;
 	tlbe->mas3 = E500_TLB_SUPER_PERM_MASK;
 	tlbe->mas7 = 0;
 
 	/* 4K map for serial output. Used by kernel wrapper. */
 	tlbe = &vcpu_e500->guest_tlb[1][1];
-	tlbe->mas1 = MAS1_VALID | MAS1_TSIZE(BOOKE_PAGESZ_4K);
+	tlbe->mas1 = MAS1_VALID | MAS1_TSIZE(BOOK3E_PAGESZ_4K);
 	tlbe->mas2 = (0xe0004500 & 0xFFFFF000) | MAS2_I | MAS2_G;
 	tlbe->mas3 = (0xe0004500 & 0xFFFFF000) | E500_TLB_SUPER_PERM_MASK;
 	tlbe->mas7 = 0;
diff --git a/arch/powerpc/kvm/e500_tlb.h b/arch/powerpc/kvm/e500_tlb.h
index 45b064b7690..d28e3010a5e 100644
--- a/arch/powerpc/kvm/e500_tlb.h
+++ b/arch/powerpc/kvm/e500_tlb.h
@@ -16,7 +16,7 @@
 #define __KVM_E500_TLB_H__
 
 #include <linux/kvm_host.h>
-#include <asm/mmu-fsl-booke.h>
+#include <asm/mmu-book3e.h>
 #include <asm/tlb.h>
 #include <asm/kvm_e500.h>
 
@@ -59,7 +59,7 @@ extern void kvmppc_e500_tlb_setup(struct kvmppc_vcpu_e500 *);
 /* TLB helper functions */
 static inline unsigned int get_tlb_size(const struct tlbe *tlbe)
 {
-	return (tlbe->mas1 >> 8) & 0xf;
+	return (tlbe->mas1 >> 7) & 0x1f;
 }
 
 static inline gva_t get_tlb_eaddr(const struct tlbe *tlbe)
@@ -70,7 +70,7 @@ static inline gva_t get_tlb_eaddr(const struct tlbe *tlbe)
 static inline u64 get_tlb_bytes(const struct tlbe *tlbe)
 {
 	unsigned int pgsize = get_tlb_size(tlbe);
-	return 1ULL << 10 << (pgsize << 1);
+	return 1ULL << 10 << pgsize;
 }
 
 static inline gva_t get_tlb_end(const struct tlbe *tlbe)
-- 
cgit v1.2.3


From 5b7c1a2c17e77cd5416755bb9ac63278996f6c51 Mon Sep 17 00:00:00 2001
From: Liu Yu <yu.liu@freescale.com>
Date: Fri, 5 Jun 2009 14:54:30 +0800
Subject: KVM: ppc: e500: Directly pass pvr to guest

Signed-off-by: Liu Yu <yu.liu@freescale.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/powerpc/include/asm/kvm_host.h | 1 -
 arch/powerpc/kvm/e500.c             | 3 ---
 arch/powerpc/kvm/emulate.c          | 2 +-
 3 files changed, 1 insertion(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/kvm_host.h b/arch/powerpc/include/asm/kvm_host.h
index fddc3ed715f..d4caa6127f5 100644
--- a/arch/powerpc/include/asm/kvm_host.h
+++ b/arch/powerpc/include/asm/kvm_host.h
@@ -153,7 +153,6 @@ struct kvm_vcpu_arch {
 	u32 pid;
 	u32 swap_pid;
 
-	u32 pvr;
 	u32 ccr0;
 	u32 ccr1;
 	u32 dbcr0;
diff --git a/arch/powerpc/kvm/e500.c b/arch/powerpc/kvm/e500.c
index 674e796f7aa..64949eef43f 100644
--- a/arch/powerpc/kvm/e500.c
+++ b/arch/powerpc/kvm/e500.c
@@ -60,9 +60,6 @@ int kvmppc_core_vcpu_setup(struct kvm_vcpu *vcpu)
 
 	kvmppc_e500_tlb_setup(vcpu_e500);
 
-	/* Use the same core vertion as host's */
-	vcpu->arch.pvr = mfspr(SPRN_PVR);
-
 	return 0;
 }
 
diff --git a/arch/powerpc/kvm/emulate.c b/arch/powerpc/kvm/emulate.c
index a561d6e8da1..f8b8248cb9b 100644
--- a/arch/powerpc/kvm/emulate.c
+++ b/arch/powerpc/kvm/emulate.c
@@ -187,7 +187,7 @@ int kvmppc_emulate_instruction(struct kvm_run *run, struct kvm_vcpu *vcpu)
 			case SPRN_SRR1:
 				vcpu->arch.gpr[rt] = vcpu->arch.srr1; break;
 			case SPRN_PVR:
-				vcpu->arch.gpr[rt] = vcpu->arch.pvr; break;
+				vcpu->arch.gpr[rt] = mfspr(SPRN_PVR); break;
 
 			/* Note: mftb and TBRL/TBWL are user-accessible, so
 			 * the guest can always access the real TB anyways.
-- 
cgit v1.2.3


From 06579dd9c12f36ac575460a226d2020d84a0128b Mon Sep 17 00:00:00 2001
From: Liu Yu <yu.liu@freescale.com>
Date: Fri, 5 Jun 2009 14:54:31 +0800
Subject: KVM: ppc: e500: Add MMUCFG and PVR emulation

Latest kernel started to use these two registers.

Signed-off-by: Liu Yu <yu.liu@freescale.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/powerpc/kvm/e500_emulate.c | 3 +++
 arch/powerpc/kvm/emulate.c      | 2 ++
 2 files changed, 5 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/kvm/e500_emulate.c b/arch/powerpc/kvm/e500_emulate.c
index 3f760414b9f..be95b8d8e3b 100644
--- a/arch/powerpc/kvm/e500_emulate.c
+++ b/arch/powerpc/kvm/e500_emulate.c
@@ -180,6 +180,9 @@ int kvmppc_core_emulate_mfspr(struct kvm_vcpu *vcpu, int sprn, int rt)
 	case SPRN_MMUCSR0:
 		vcpu->arch.gpr[rt] = 0; break;
 
+	case SPRN_MMUCFG:
+		vcpu->arch.gpr[rt] = mfspr(SPRN_MMUCFG); break;
+
 	/* extra exceptions */
 	case SPRN_IVOR32:
 		vcpu->arch.gpr[rt] = vcpu->arch.ivor[BOOKE_IRQPRIO_SPE_UNAVAIL];
diff --git a/arch/powerpc/kvm/emulate.c b/arch/powerpc/kvm/emulate.c
index f8b8248cb9b..28a8237fe78 100644
--- a/arch/powerpc/kvm/emulate.c
+++ b/arch/powerpc/kvm/emulate.c
@@ -188,6 +188,8 @@ int kvmppc_emulate_instruction(struct kvm_run *run, struct kvm_vcpu *vcpu)
 				vcpu->arch.gpr[rt] = vcpu->arch.srr1; break;
 			case SPRN_PVR:
 				vcpu->arch.gpr[rt] = mfspr(SPRN_PVR); break;
+			case SPRN_PIR:
+				vcpu->arch.gpr[rt] = mfspr(SPRN_PIR); break;
 
 			/* Note: mftb and TBRL/TBWL are user-accessible, so
 			 * the guest can always access the real TB anyways.
-- 
cgit v1.2.3


From 238adc77051ab19b35663e7f214f52eaf44ed7ef Mon Sep 17 00:00:00 2001
From: Jan Kiszka <jan.kiszka@siemens.com>
Date: Fri, 5 Jun 2009 16:13:34 +0200
Subject: KVM: Cleanup LAPIC interface

None of the interface services the LAPIC emulation provides need to be
exported to modules, and kvm_lapic_get_base is even totally unused
today.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/lapic.c | 12 ------------
 1 file changed, 12 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index 4bfd458a4f3..a23f42e550a 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -194,7 +194,6 @@ int kvm_lapic_find_highest_irr(struct kvm_vcpu *vcpu)
 
 	return highest_irr;
 }
-EXPORT_SYMBOL_GPL(kvm_lapic_find_highest_irr);
 
 static int __apic_accept_irq(struct kvm_lapic *apic, int delivery_mode,
 			     int vector, int level, int trig_mode);
@@ -768,7 +767,6 @@ void kvm_lapic_set_tpr(struct kvm_vcpu *vcpu, unsigned long cr8)
 	apic_set_tpr(apic, ((cr8 & 0x0f) << 4)
 		     | (apic_get_reg(apic, APIC_TASKPRI) & 4));
 }
-EXPORT_SYMBOL_GPL(kvm_lapic_set_tpr);
 
 u64 kvm_lapic_get_cr8(struct kvm_vcpu *vcpu)
 {
@@ -781,7 +779,6 @@ u64 kvm_lapic_get_cr8(struct kvm_vcpu *vcpu)
 
 	return (tpr & 0xf0) >> 4;
 }
-EXPORT_SYMBOL_GPL(kvm_lapic_get_cr8);
 
 void kvm_lapic_set_base(struct kvm_vcpu *vcpu, u64 value)
 {
@@ -805,12 +802,6 @@ void kvm_lapic_set_base(struct kvm_vcpu *vcpu, u64 value)
 
 }
 
-u64 kvm_lapic_get_base(struct kvm_vcpu *vcpu)
-{
-	return vcpu->arch.apic_base;
-}
-EXPORT_SYMBOL_GPL(kvm_lapic_get_base);
-
 void kvm_lapic_reset(struct kvm_vcpu *vcpu)
 {
 	struct kvm_lapic *apic;
@@ -860,7 +851,6 @@ void kvm_lapic_reset(struct kvm_vcpu *vcpu)
 		   vcpu, kvm_apic_id(apic),
 		   vcpu->arch.apic_base, apic->base_address);
 }
-EXPORT_SYMBOL_GPL(kvm_lapic_reset);
 
 bool kvm_apic_present(struct kvm_vcpu *vcpu)
 {
@@ -871,7 +861,6 @@ int kvm_lapic_enabled(struct kvm_vcpu *vcpu)
 {
 	return kvm_apic_present(vcpu) && apic_sw_enabled(vcpu->arch.apic);
 }
-EXPORT_SYMBOL_GPL(kvm_lapic_enabled);
 
 /*
  *----------------------------------------------------------------------
@@ -970,7 +959,6 @@ nomem_free_apic:
 nomem:
 	return -ENOMEM;
 }
-EXPORT_SYMBOL_GPL(kvm_create_lapic);
 
 int kvm_apic_has_interrupt(struct kvm_vcpu *vcpu)
 {
-- 
cgit v1.2.3


From 9f4cc12765ea48a40347449d6802a3322ced8709 Mon Sep 17 00:00:00 2001
From: Marcelo Tosatti <mtosatti@redhat.com>
Date: Thu, 4 Jun 2009 15:08:21 -0300
Subject: KVM: Grab pic lock in kvm_pic_clear_isr_ack

isr_ack is protected by kvm_pic->lock.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/i8259.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kvm/i8259.c b/arch/x86/kvm/i8259.c
index 2520922282d..bf94a45f4f8 100644
--- a/arch/x86/kvm/i8259.c
+++ b/arch/x86/kvm/i8259.c
@@ -72,8 +72,10 @@ static void pic_clear_isr(struct kvm_kpic_state *s, int irq)
 void kvm_pic_clear_isr_ack(struct kvm *kvm)
 {
 	struct kvm_pic *s = pic_irqchip(kvm);
+	pic_lock(s);
 	s->pics[0].isr_ack = 0xff;
 	s->pics[1].isr_ack = 0xff;
+	pic_unlock(s);
 }
 
 /*
-- 
cgit v1.2.3


From fa40a8214bb9bcae8d49c234c19d8b4a6c1f37ff Mon Sep 17 00:00:00 2001
From: Marcelo Tosatti <mtosatti@redhat.com>
Date: Thu, 4 Jun 2009 15:08:24 -0300
Subject: KVM: switch irq injection/acking data structures to irq_lock

Protect irq injection/acking data structures with a separate irq_lock
mutex. This fixes the following deadlock:

CPU A                               CPU B
kvm_vm_ioctl_deassign_dev_irq()
  mutex_lock(&kvm->lock);            worker_thread()
  -> kvm_deassign_irq()                -> kvm_assigned_dev_interrupt_work_handler()
    -> deassign_host_irq()               mutex_lock(&kvm->lock);
      -> cancel_work_sync() [blocked]

[gleb: fix ia64 path]

Reported-by: Alex Williamson <alex.williamson@hp.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/ia64/kvm/kvm-ia64.c |  4 ++--
 arch/x86/kvm/i8254.c     |  4 ++--
 arch/x86/kvm/lapic.c     |  4 ++++
 arch/x86/kvm/x86.c       | 19 +++++++++----------
 4 files changed, 17 insertions(+), 14 deletions(-)

(limited to 'arch')

diff --git a/arch/ia64/kvm/kvm-ia64.c b/arch/ia64/kvm/kvm-ia64.c
index 319922137fd..8dde36953af 100644
--- a/arch/ia64/kvm/kvm-ia64.c
+++ b/arch/ia64/kvm/kvm-ia64.c
@@ -1000,10 +1000,10 @@ long kvm_arch_vm_ioctl(struct file *filp,
 			goto out;
 		if (irqchip_in_kernel(kvm)) {
 			__s32 status;
-			mutex_lock(&kvm->lock);
+			mutex_lock(&kvm->irq_lock);
 			status = kvm_set_irq(kvm, KVM_USERSPACE_IRQ_SOURCE_ID,
 				    irq_event.irq, irq_event.level);
-			mutex_unlock(&kvm->lock);
+			mutex_unlock(&kvm->irq_lock);
 			if (ioctl == KVM_IRQ_LINE_STATUS) {
 				irq_event.status = status;
 				if (copy_to_user(argp, &irq_event,
diff --git a/arch/x86/kvm/i8254.c b/arch/x86/kvm/i8254.c
index 977af7ab819..3837db65d33 100644
--- a/arch/x86/kvm/i8254.c
+++ b/arch/x86/kvm/i8254.c
@@ -654,10 +654,10 @@ static void __inject_pit_timer_intr(struct kvm *kvm)
 	struct kvm_vcpu *vcpu;
 	int i;
 
-	mutex_lock(&kvm->lock);
+	mutex_lock(&kvm->irq_lock);
 	kvm_set_irq(kvm, kvm->arch.vpit->irq_source_id, 0, 1);
 	kvm_set_irq(kvm, kvm->arch.vpit->irq_source_id, 0, 0);
-	mutex_unlock(&kvm->lock);
+	mutex_unlock(&kvm->irq_lock);
 
 	/*
 	 * Provides NMI watchdog support via Virtual Wire mode.
diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index a23f42e550a..44f20cdb570 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -424,7 +424,9 @@ static void apic_set_eoi(struct kvm_lapic *apic)
 		trigger_mode = IOAPIC_LEVEL_TRIG;
 	else
 		trigger_mode = IOAPIC_EDGE_TRIG;
+	mutex_lock(&apic->vcpu->kvm->irq_lock);
 	kvm_ioapic_update_eoi(apic->vcpu->kvm, vector, trigger_mode);
+	mutex_unlock(&apic->vcpu->kvm->irq_lock);
 }
 
 static void apic_send_ipi(struct kvm_lapic *apic)
@@ -448,7 +450,9 @@ static void apic_send_ipi(struct kvm_lapic *apic)
 		   irq.trig_mode, irq.level, irq.dest_mode, irq.delivery_mode,
 		   irq.vector);
 
+	mutex_lock(&apic->vcpu->kvm->irq_lock);
 	kvm_irq_delivery_to_apic(apic->vcpu->kvm, apic, &irq);
+	mutex_unlock(&apic->vcpu->kvm->irq_lock);
 }
 
 static u32 apic_get_tmcct(struct kvm_lapic *apic)
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 2ad8c97f58c..05cbe83c74e 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -2136,10 +2136,10 @@ long kvm_arch_vm_ioctl(struct file *filp,
 			goto out;
 		if (irqchip_in_kernel(kvm)) {
 			__s32 status;
-			mutex_lock(&kvm->lock);
+			mutex_lock(&kvm->irq_lock);
 			status = kvm_set_irq(kvm, KVM_USERSPACE_IRQ_SOURCE_ID,
 					irq_event.irq, irq_event.level);
-			mutex_unlock(&kvm->lock);
+			mutex_unlock(&kvm->irq_lock);
 			if (ioctl == KVM_IRQ_LINE_STATUS) {
 				irq_event.status = status;
 				if (copy_to_user(argp, &irq_event,
@@ -2385,12 +2385,11 @@ mmio:
 	 */
 	mutex_lock(&vcpu->kvm->lock);
 	mmio_dev = vcpu_find_mmio_dev(vcpu, gpa, bytes, 0);
+	mutex_unlock(&vcpu->kvm->lock);
 	if (mmio_dev) {
 		kvm_iodevice_read(mmio_dev, gpa, bytes, val);
-		mutex_unlock(&vcpu->kvm->lock);
 		return X86EMUL_CONTINUE;
 	}
-	mutex_unlock(&vcpu->kvm->lock);
 
 	vcpu->mmio_needed = 1;
 	vcpu->mmio_phys_addr = gpa;
@@ -2440,12 +2439,11 @@ mmio:
 	 */
 	mutex_lock(&vcpu->kvm->lock);
 	mmio_dev = vcpu_find_mmio_dev(vcpu, gpa, bytes, 1);
+	mutex_unlock(&vcpu->kvm->lock);
 	if (mmio_dev) {
 		kvm_iodevice_write(mmio_dev, gpa, bytes, val);
-		mutex_unlock(&vcpu->kvm->lock);
 		return X86EMUL_CONTINUE;
 	}
-	mutex_unlock(&vcpu->kvm->lock);
 
 	vcpu->mmio_needed = 1;
 	vcpu->mmio_phys_addr = gpa;
@@ -2768,7 +2766,6 @@ static void kernel_pio(struct kvm_io_device *pio_dev,
 {
 	/* TODO: String I/O for in kernel device */
 
-	mutex_lock(&vcpu->kvm->lock);
 	if (vcpu->arch.pio.in)
 		kvm_iodevice_read(pio_dev, vcpu->arch.pio.port,
 				  vcpu->arch.pio.size,
@@ -2777,7 +2774,6 @@ static void kernel_pio(struct kvm_io_device *pio_dev,
 		kvm_iodevice_write(pio_dev, vcpu->arch.pio.port,
 				   vcpu->arch.pio.size,
 				   pd);
-	mutex_unlock(&vcpu->kvm->lock);
 }
 
 static void pio_string_write(struct kvm_io_device *pio_dev,
@@ -2787,14 +2783,12 @@ static void pio_string_write(struct kvm_io_device *pio_dev,
 	void *pd = vcpu->arch.pio_data;
 	int i;
 
-	mutex_lock(&vcpu->kvm->lock);
 	for (i = 0; i < io->cur_count; i++) {
 		kvm_iodevice_write(pio_dev, io->port,
 				   io->size,
 				   pd);
 		pd += io->size;
 	}
-	mutex_unlock(&vcpu->kvm->lock);
 }
 
 static struct kvm_io_device *vcpu_find_pio_dev(struct kvm_vcpu *vcpu,
@@ -2831,7 +2825,9 @@ int kvm_emulate_pio(struct kvm_vcpu *vcpu, struct kvm_run *run, int in,
 	val = kvm_register_read(vcpu, VCPU_REGS_RAX);
 	memcpy(vcpu->arch.pio_data, &val, 4);
 
+	mutex_lock(&vcpu->kvm->lock);
 	pio_dev = vcpu_find_pio_dev(vcpu, port, size, !in);
+	mutex_unlock(&vcpu->kvm->lock);
 	if (pio_dev) {
 		kernel_pio(pio_dev, vcpu, vcpu->arch.pio_data);
 		complete_pio(vcpu);
@@ -2895,9 +2891,12 @@ int kvm_emulate_pio_string(struct kvm_vcpu *vcpu, struct kvm_run *run, int in,
 
 	vcpu->arch.pio.guest_gva = address;
 
+	mutex_lock(&vcpu->kvm->lock);
 	pio_dev = vcpu_find_pio_dev(vcpu, port,
 				    vcpu->arch.pio.cur_count,
 				    !vcpu->arch.pio.in);
+	mutex_unlock(&vcpu->kvm->lock);
+
 	if (!vcpu->arch.pio.in) {
 		/* string PIO write */
 		ret = pio_copy_data(vcpu);
-- 
cgit v1.2.3


From 3a624e29c7587b79abab60e279f9d1a62a3d4716 Mon Sep 17 00:00:00 2001
From: Nitin A Kamble <nitin.a.kamble@intel.com>
Date: Mon, 8 Jun 2009 11:34:16 -0700
Subject: KVM: VMX: Support Unrestricted Guest feature

"Unrestricted Guest" feature is added in the VMX specification.
Intel Westmere and onwards processors will support this feature.

    It allows kvm guests to run real mode and unpaged mode
code natively in the VMX mode when EPT is turned on. With the
unrestricted guest there is no need to emulate the guest real mode code
in the vm86 container or in the emulator. Also the guest big real mode
code works like native.

  The attached patch enhances KVM to use the unrestricted guest feature
if available on the processor. It also adds a new kernel/module
parameter to disable the unrestricted guest feature at the boot time.

Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/include/asm/kvm_host.h | 12 +++++----
 arch/x86/include/asm/vmx.h      |  1 +
 arch/x86/kvm/vmx.c              | 60 ++++++++++++++++++++++++++++++++++++-----
 3 files changed, 62 insertions(+), 11 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index 1cc901ec4ba..a1a96a57bb9 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -37,12 +37,14 @@
 #define CR3_L_MODE_RESERVED_BITS (CR3_NONPAE_RESERVED_BITS |	\
 				  0xFFFFFF0000000000ULL)
 
-#define KVM_GUEST_CR0_MASK				   \
-	(X86_CR0_PG | X86_CR0_PE | X86_CR0_WP | X86_CR0_NE \
-	 | X86_CR0_NW | X86_CR0_CD)
+#define KVM_GUEST_CR0_MASK_UNRESTRICTED_GUEST				\
+	(X86_CR0_WP | X86_CR0_NE | X86_CR0_NW | X86_CR0_CD)
+#define KVM_GUEST_CR0_MASK						\
+	(KVM_GUEST_CR0_MASK_UNRESTRICTED_GUEST | X86_CR0_PG | X86_CR0_PE)
+#define KVM_VM_CR0_ALWAYS_ON_UNRESTRICTED_GUEST				\
+	(X86_CR0_WP | X86_CR0_NE | X86_CR0_TS | X86_CR0_MP)
 #define KVM_VM_CR0_ALWAYS_ON						\
-	(X86_CR0_PG | X86_CR0_PE | X86_CR0_WP | X86_CR0_NE | X86_CR0_TS \
-	 | X86_CR0_MP)
+	(KVM_VM_CR0_ALWAYS_ON_UNRESTRICTED_GUEST | X86_CR0_PG | X86_CR0_PE)
 #define KVM_GUEST_CR4_MASK						\
 	(X86_CR4_VME | X86_CR4_PSE | X86_CR4_PAE | X86_CR4_PGE | X86_CR4_VMXE)
 #define KVM_PMODE_VM_CR4_ALWAYS_ON (X86_CR4_PAE | X86_CR4_VMXE)
diff --git a/arch/x86/include/asm/vmx.h b/arch/x86/include/asm/vmx.h
index 11be5ad2e0e..e7927a639d6 100644
--- a/arch/x86/include/asm/vmx.h
+++ b/arch/x86/include/asm/vmx.h
@@ -55,6 +55,7 @@
 #define SECONDARY_EXEC_ENABLE_EPT               0x00000002
 #define SECONDARY_EXEC_ENABLE_VPID              0x00000020
 #define SECONDARY_EXEC_WBINVD_EXITING		0x00000040
+#define SECONDARY_EXEC_UNRESTRICTED_GUEST	0x00000080
 
 
 #define PIN_BASED_EXT_INTR_MASK                 0x00000001
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 959cb59cfae..f0f9773f0b0 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -51,6 +51,10 @@ module_param_named(flexpriority, flexpriority_enabled, bool, S_IRUGO);
 static int __read_mostly enable_ept = 1;
 module_param_named(ept, enable_ept, bool, S_IRUGO);
 
+static int __read_mostly enable_unrestricted_guest = 1;
+module_param_named(unrestricted_guest,
+			enable_unrestricted_guest, bool, S_IRUGO);
+
 static int __read_mostly emulate_invalid_guest_state = 0;
 module_param(emulate_invalid_guest_state, bool, S_IRUGO);
 
@@ -279,6 +283,12 @@ static inline int cpu_has_vmx_ept(void)
 		SECONDARY_EXEC_ENABLE_EPT;
 }
 
+static inline int cpu_has_vmx_unrestricted_guest(void)
+{
+	return vmcs_config.cpu_based_2nd_exec_ctrl &
+		SECONDARY_EXEC_UNRESTRICTED_GUEST;
+}
+
 static inline int vm_need_virtualize_apic_accesses(struct kvm *kvm)
 {
 	return flexpriority_enabled &&
@@ -1210,7 +1220,8 @@ static __init int setup_vmcs_config(struct vmcs_config *vmcs_conf)
 		opt2 = SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES |
 			SECONDARY_EXEC_WBINVD_EXITING |
 			SECONDARY_EXEC_ENABLE_VPID |
-			SECONDARY_EXEC_ENABLE_EPT;
+			SECONDARY_EXEC_ENABLE_EPT |
+			SECONDARY_EXEC_UNRESTRICTED_GUEST;
 		if (adjust_vmx_controls(min2, opt2,
 					MSR_IA32_VMX_PROCBASED_CTLS2,
 					&_cpu_based_2nd_exec_control) < 0)
@@ -1340,8 +1351,13 @@ static __init int hardware_setup(void)
 	if (!cpu_has_vmx_vpid())
 		enable_vpid = 0;
 
-	if (!cpu_has_vmx_ept())
+	if (!cpu_has_vmx_ept()) {
 		enable_ept = 0;
+		enable_unrestricted_guest = 0;
+	}
+
+	if (!cpu_has_vmx_unrestricted_guest())
+		enable_unrestricted_guest = 0;
 
 	if (!cpu_has_vmx_flexpriority())
 		flexpriority_enabled = 0;
@@ -1440,6 +1456,9 @@ static void enter_rmode(struct kvm_vcpu *vcpu)
 	unsigned long flags;
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
 
+	if (enable_unrestricted_guest)
+		return;
+
 	vmx->emulation_required = 1;
 	vcpu->arch.rmode.vm86_active = 1;
 
@@ -1593,7 +1612,6 @@ static void ept_update_paging_mode_cr0(unsigned long *hw_cr0,
 			      CPU_BASED_CR3_STORE_EXITING));
 		vcpu->arch.cr0 = cr0;
 		vmx_set_cr4(vcpu, vcpu->arch.cr4);
-		*hw_cr0 |= X86_CR0_PE | X86_CR0_PG;
 		*hw_cr0 &= ~X86_CR0_WP;
 	} else if (!is_paging(vcpu)) {
 		/* From nonpaging to paging */
@@ -1620,8 +1638,13 @@ static void ept_update_paging_mode_cr4(unsigned long *hw_cr4,
 
 static void vmx_set_cr0(struct kvm_vcpu *vcpu, unsigned long cr0)
 {
-	unsigned long hw_cr0 = (cr0 & ~KVM_GUEST_CR0_MASK) |
-				KVM_VM_CR0_ALWAYS_ON;
+	unsigned long hw_cr0;
+
+	if (enable_unrestricted_guest)
+		hw_cr0 = (cr0 & ~KVM_GUEST_CR0_MASK_UNRESTRICTED_GUEST)
+			| KVM_VM_CR0_ALWAYS_ON_UNRESTRICTED_GUEST;
+	else
+		hw_cr0 = (cr0 & ~KVM_GUEST_CR0_MASK) | KVM_VM_CR0_ALWAYS_ON;
 
 	vmx_fpu_deactivate(vcpu);
 
@@ -1786,6 +1809,21 @@ static void vmx_set_segment(struct kvm_vcpu *vcpu,
 		ar = 0xf3;
 	} else
 		ar = vmx_segment_access_rights(var);
+
+	/*
+	 *   Fix the "Accessed" bit in AR field of segment registers for older
+	 * qemu binaries.
+	 *   IA32 arch specifies that at the time of processor reset the
+	 * "Accessed" bit in the AR field of segment registers is 1. And qemu
+	 * is setting it to 0 in the usedland code. This causes invalid guest
+	 * state vmexit when "unrestricted guest" mode is turned on.
+	 *    Fix for this setup issue in cpu_reset is being pushed in the qemu
+	 * tree. Newer qemu binaries with that qemu fix would not need this
+	 * kvm hack.
+	 */
+	if (enable_unrestricted_guest && (seg != VCPU_SREG_LDTR))
+		ar |= 0x1; /* Accessed */
+
 	vmcs_write32(sf->ar_bytes, ar);
 }
 
@@ -2082,11 +2120,19 @@ out:
 static void seg_setup(int seg)
 {
 	struct kvm_vmx_segment_field *sf = &kvm_vmx_segment_fields[seg];
+	unsigned int ar;
 
 	vmcs_write16(sf->selector, 0);
 	vmcs_writel(sf->base, 0);
 	vmcs_write32(sf->limit, 0xffff);
-	vmcs_write32(sf->ar_bytes, 0xf3);
+	if (enable_unrestricted_guest) {
+		ar = 0x93;
+		if (seg == VCPU_SREG_CS)
+			ar |= 0x08; /* code segment */
+	} else
+		ar = 0xf3;
+
+	vmcs_write32(sf->ar_bytes, ar);
 }
 
 static int alloc_apic_access_page(struct kvm *kvm)
@@ -2229,6 +2275,8 @@ static int vmx_vcpu_setup(struct vcpu_vmx *vmx)
 			exec_control &= ~SECONDARY_EXEC_ENABLE_VPID;
 		if (!enable_ept)
 			exec_control &= ~SECONDARY_EXEC_ENABLE_EPT;
+		if (!enable_unrestricted_guest)
+			exec_control &= ~SECONDARY_EXEC_UNRESTRICTED_GUEST;
 		vmcs_write32(SECONDARY_VM_EXEC_CONTROL, exec_control);
 	}
 
-- 
cgit v1.2.3


From 7ffd92c53c5ebd0ad5a68ac3ca033c3a06374d19 Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Tue, 9 Jun 2009 14:10:45 +0300
Subject: KVM: VMX: Move rmode structure to vmx-specific code

rmode is only used in vmx, so move it to vmx.c

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/include/asm/kvm_host.h | 10 ------
 arch/x86/kvm/vmx.c              | 78 +++++++++++++++++++++++------------------
 2 files changed, 44 insertions(+), 44 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index a1a96a57bb9..c7b0cc2b702 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -340,16 +340,6 @@ struct kvm_vcpu_arch {
 		u8 nr;
 	} interrupt;
 
-	struct {
-		int vm86_active;
-		u8 save_iopl;
-		struct kvm_save_segment {
-			u16 selector;
-			unsigned long base;
-			u32 limit;
-			u32 ar;
-		} tr, es, ds, fs, gs;
-	} rmode;
 	int halt_request; /* real mode on Intel only */
 
 	int cpuid_nent;
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index f0f9773f0b0..ae682929a64 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -88,6 +88,14 @@ struct vcpu_vmx {
 		int           guest_efer_loaded;
 	} host_state;
 	struct {
+		int vm86_active;
+		u8 save_iopl;
+		struct kvm_save_segment {
+			u16 selector;
+			unsigned long base;
+			u32 limit;
+			u32 ar;
+		} tr, es, ds, fs, gs;
 		struct {
 			bool pending;
 			u8 vector;
@@ -516,7 +524,7 @@ static void update_exception_bitmap(struct kvm_vcpu *vcpu)
 		if (vcpu->guest_debug & KVM_GUESTDBG_USE_SW_BP)
 			eb |= 1u << BP_VECTOR;
 	}
-	if (vcpu->arch.rmode.vm86_active)
+	if (to_vmx(vcpu)->rmode.vm86_active)
 		eb = ~0;
 	if (enable_ept)
 		eb &= ~(1u << PF_VECTOR); /* bypass_guest_pf = 0 */
@@ -752,7 +760,7 @@ static unsigned long vmx_get_rflags(struct kvm_vcpu *vcpu)
 
 static void vmx_set_rflags(struct kvm_vcpu *vcpu, unsigned long rflags)
 {
-	if (vcpu->arch.rmode.vm86_active)
+	if (to_vmx(vcpu)->rmode.vm86_active)
 		rflags |= X86_EFLAGS_IOPL | X86_EFLAGS_VM;
 	vmcs_writel(GUEST_RFLAGS, rflags);
 }
@@ -809,7 +817,7 @@ static void vmx_queue_exception(struct kvm_vcpu *vcpu, unsigned nr,
 		intr_info |= INTR_INFO_DELIVER_CODE_MASK;
 	}
 
-	if (vcpu->arch.rmode.vm86_active) {
+	if (vmx->rmode.vm86_active) {
 		vmx->rmode.irq.pending = true;
 		vmx->rmode.irq.vector = nr;
 		vmx->rmode.irq.rip = kvm_rip_read(vcpu);
@@ -1395,15 +1403,15 @@ static void enter_pmode(struct kvm_vcpu *vcpu)
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
 
 	vmx->emulation_required = 1;
-	vcpu->arch.rmode.vm86_active = 0;
+	vmx->rmode.vm86_active = 0;
 
-	vmcs_writel(GUEST_TR_BASE, vcpu->arch.rmode.tr.base);
-	vmcs_write32(GUEST_TR_LIMIT, vcpu->arch.rmode.tr.limit);
-	vmcs_write32(GUEST_TR_AR_BYTES, vcpu->arch.rmode.tr.ar);
+	vmcs_writel(GUEST_TR_BASE, vmx->rmode.tr.base);
+	vmcs_write32(GUEST_TR_LIMIT, vmx->rmode.tr.limit);
+	vmcs_write32(GUEST_TR_AR_BYTES, vmx->rmode.tr.ar);
 
 	flags = vmcs_readl(GUEST_RFLAGS);
 	flags &= ~(X86_EFLAGS_IOPL | X86_EFLAGS_VM);
-	flags |= (vcpu->arch.rmode.save_iopl << IOPL_SHIFT);
+	flags |= (vmx->rmode.save_iopl << IOPL_SHIFT);
 	vmcs_writel(GUEST_RFLAGS, flags);
 
 	vmcs_writel(GUEST_CR4, (vmcs_readl(GUEST_CR4) & ~X86_CR4_VME) |
@@ -1414,10 +1422,10 @@ static void enter_pmode(struct kvm_vcpu *vcpu)
 	if (emulate_invalid_guest_state)
 		return;
 
-	fix_pmode_dataseg(VCPU_SREG_ES, &vcpu->arch.rmode.es);
-	fix_pmode_dataseg(VCPU_SREG_DS, &vcpu->arch.rmode.ds);
-	fix_pmode_dataseg(VCPU_SREG_GS, &vcpu->arch.rmode.gs);
-	fix_pmode_dataseg(VCPU_SREG_FS, &vcpu->arch.rmode.fs);
+	fix_pmode_dataseg(VCPU_SREG_ES, &vmx->rmode.es);
+	fix_pmode_dataseg(VCPU_SREG_DS, &vmx->rmode.ds);
+	fix_pmode_dataseg(VCPU_SREG_GS, &vmx->rmode.gs);
+	fix_pmode_dataseg(VCPU_SREG_FS, &vmx->rmode.fs);
 
 	vmcs_write16(GUEST_SS_SELECTOR, 0);
 	vmcs_write32(GUEST_SS_AR_BYTES, 0x93);
@@ -1460,19 +1468,19 @@ static void enter_rmode(struct kvm_vcpu *vcpu)
 		return;
 
 	vmx->emulation_required = 1;
-	vcpu->arch.rmode.vm86_active = 1;
+	vmx->rmode.vm86_active = 1;
 
-	vcpu->arch.rmode.tr.base = vmcs_readl(GUEST_TR_BASE);
+	vmx->rmode.tr.base = vmcs_readl(GUEST_TR_BASE);
 	vmcs_writel(GUEST_TR_BASE, rmode_tss_base(vcpu->kvm));
 
-	vcpu->arch.rmode.tr.limit = vmcs_read32(GUEST_TR_LIMIT);
+	vmx->rmode.tr.limit = vmcs_read32(GUEST_TR_LIMIT);
 	vmcs_write32(GUEST_TR_LIMIT, RMODE_TSS_SIZE - 1);
 
-	vcpu->arch.rmode.tr.ar = vmcs_read32(GUEST_TR_AR_BYTES);
+	vmx->rmode.tr.ar = vmcs_read32(GUEST_TR_AR_BYTES);
 	vmcs_write32(GUEST_TR_AR_BYTES, 0x008b);
 
 	flags = vmcs_readl(GUEST_RFLAGS);
-	vcpu->arch.rmode.save_iopl
+	vmx->rmode.save_iopl
 		= (flags & X86_EFLAGS_IOPL) >> IOPL_SHIFT;
 
 	flags |= X86_EFLAGS_IOPL | X86_EFLAGS_VM;
@@ -1494,10 +1502,10 @@ static void enter_rmode(struct kvm_vcpu *vcpu)
 		vmcs_writel(GUEST_CS_BASE, 0xf0000);
 	vmcs_write16(GUEST_CS_SELECTOR, vmcs_readl(GUEST_CS_BASE) >> 4);
 
-	fix_rmode_seg(VCPU_SREG_ES, &vcpu->arch.rmode.es);
-	fix_rmode_seg(VCPU_SREG_DS, &vcpu->arch.rmode.ds);
-	fix_rmode_seg(VCPU_SREG_GS, &vcpu->arch.rmode.gs);
-	fix_rmode_seg(VCPU_SREG_FS, &vcpu->arch.rmode.fs);
+	fix_rmode_seg(VCPU_SREG_ES, &vmx->rmode.es);
+	fix_rmode_seg(VCPU_SREG_DS, &vmx->rmode.ds);
+	fix_rmode_seg(VCPU_SREG_GS, &vmx->rmode.gs);
+	fix_rmode_seg(VCPU_SREG_FS, &vmx->rmode.fs);
 
 continue_rmode:
 	kvm_mmu_reset_context(vcpu);
@@ -1638,6 +1646,7 @@ static void ept_update_paging_mode_cr4(unsigned long *hw_cr4,
 
 static void vmx_set_cr0(struct kvm_vcpu *vcpu, unsigned long cr0)
 {
+	struct vcpu_vmx *vmx = to_vmx(vcpu);
 	unsigned long hw_cr0;
 
 	if (enable_unrestricted_guest)
@@ -1648,10 +1657,10 @@ static void vmx_set_cr0(struct kvm_vcpu *vcpu, unsigned long cr0)
 
 	vmx_fpu_deactivate(vcpu);
 
-	if (vcpu->arch.rmode.vm86_active && (cr0 & X86_CR0_PE))
+	if (vmx->rmode.vm86_active && (cr0 & X86_CR0_PE))
 		enter_pmode(vcpu);
 
-	if (!vcpu->arch.rmode.vm86_active && !(cr0 & X86_CR0_PE))
+	if (!vmx->rmode.vm86_active && !(cr0 & X86_CR0_PE))
 		enter_rmode(vcpu);
 
 #ifdef CONFIG_X86_64
@@ -1707,7 +1716,7 @@ static void vmx_set_cr3(struct kvm_vcpu *vcpu, unsigned long cr3)
 
 static void vmx_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4)
 {
-	unsigned long hw_cr4 = cr4 | (vcpu->arch.rmode.vm86_active ?
+	unsigned long hw_cr4 = cr4 | (to_vmx(vcpu)->rmode.vm86_active ?
 		    KVM_RMODE_VM_CR4_ALWAYS_ON : KVM_PMODE_VM_CR4_ALWAYS_ON);
 
 	vcpu->arch.cr4 = cr4;
@@ -1787,20 +1796,21 @@ static u32 vmx_segment_access_rights(struct kvm_segment *var)
 static void vmx_set_segment(struct kvm_vcpu *vcpu,
 			    struct kvm_segment *var, int seg)
 {
+	struct vcpu_vmx *vmx = to_vmx(vcpu);
 	struct kvm_vmx_segment_field *sf = &kvm_vmx_segment_fields[seg];
 	u32 ar;
 
-	if (vcpu->arch.rmode.vm86_active && seg == VCPU_SREG_TR) {
-		vcpu->arch.rmode.tr.selector = var->selector;
-		vcpu->arch.rmode.tr.base = var->base;
-		vcpu->arch.rmode.tr.limit = var->limit;
-		vcpu->arch.rmode.tr.ar = vmx_segment_access_rights(var);
+	if (vmx->rmode.vm86_active && seg == VCPU_SREG_TR) {
+		vmx->rmode.tr.selector = var->selector;
+		vmx->rmode.tr.base = var->base;
+		vmx->rmode.tr.limit = var->limit;
+		vmx->rmode.tr.ar = vmx_segment_access_rights(var);
 		return;
 	}
 	vmcs_writel(sf->base, var->base);
 	vmcs_write32(sf->limit, var->limit);
 	vmcs_write16(sf->selector, var->selector);
-	if (vcpu->arch.rmode.vm86_active && var->s) {
+	if (vmx->rmode.vm86_active && var->s) {
 		/*
 		 * Hack real-mode segments into vm86 compatibility.
 		 */
@@ -2394,7 +2404,7 @@ static int vmx_vcpu_reset(struct kvm_vcpu *vcpu)
 		goto out;
 	}
 
-	vmx->vcpu.arch.rmode.vm86_active = 0;
+	vmx->rmode.vm86_active = 0;
 
 	vmx->soft_vnmi_blocked = 0;
 
@@ -2532,7 +2542,7 @@ static void vmx_inject_irq(struct kvm_vcpu *vcpu)
 	KVMTRACE_1D(INJ_VIRQ, vcpu, (u32)irq, handler);
 
 	++vcpu->stat.irq_injections;
-	if (vcpu->arch.rmode.vm86_active) {
+	if (vmx->rmode.vm86_active) {
 		vmx->rmode.irq.pending = true;
 		vmx->rmode.irq.vector = irq;
 		vmx->rmode.irq.rip = kvm_rip_read(vcpu);
@@ -2573,7 +2583,7 @@ static void vmx_inject_nmi(struct kvm_vcpu *vcpu)
 	}
 
 	++vcpu->stat.nmi_injections;
-	if (vcpu->arch.rmode.vm86_active) {
+	if (vmx->rmode.vm86_active) {
 		vmx->rmode.irq.pending = true;
 		vmx->rmode.irq.vector = NMI_VECTOR;
 		vmx->rmode.irq.rip = kvm_rip_read(vcpu);
@@ -2737,7 +2747,7 @@ static int handle_exception(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 		return kvm_mmu_page_fault(vcpu, cr2, error_code);
 	}
 
-	if (vcpu->arch.rmode.vm86_active &&
+	if (vmx->rmode.vm86_active &&
 	    handle_rmode_exception(vcpu, intr_info & INTR_INFO_VECTOR_MASK,
 								error_code)) {
 		if (vcpu->arch.halt_request) {
-- 
cgit v1.2.3


From 439e218a6f4716da484314fc5a1f0a59b0212c01 Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Wed, 10 Jun 2009 12:56:54 +0300
Subject: KVM: MMU: Fix is_dirty_pte()

is_dirty_pte() is used on guest ptes, not shadow ptes, so it needs to avoid
shadow_dirty_mask and use PT_DIRTY_MASK instead.

Misdetecting dirty pages could lead to unnecessarily setting the dirty bit
under EPT.

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/mmu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 8ee67e3fb9d..8f2cb29db2f 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -242,7 +242,7 @@ static int is_writeble_pte(unsigned long pte)
 
 static int is_dirty_pte(unsigned long pte)
 {
-	return pte & shadow_dirty_mask;
+	return pte & PT_DIRTY_MASK;
 }
 
 static int is_rmap_pte(u64 pte)
-- 
cgit v1.2.3


From 43a3795a3a12425de31e25ce0ebc3bb41501cef7 Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Wed, 10 Jun 2009 14:12:05 +0300
Subject: KVM: MMU: Adjust pte accessors to explicitly indicate guest or shadow
 pte

Since the guest and host ptes can have wildly different format, adjust
the pte accessor names to indicate on which type of pte they operate on.

No functional changes.

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/mmu.c         | 16 ++++++++--------
 arch/x86/kvm/mmu.h         |  2 +-
 arch/x86/kvm/paging_tmpl.h | 22 +++++++++++-----------
 arch/x86/kvm/x86.c         |  2 +-
 4 files changed, 21 insertions(+), 21 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 8f2cb29db2f..a039e6bc21f 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -240,12 +240,12 @@ static int is_writeble_pte(unsigned long pte)
 	return pte & PT_WRITABLE_MASK;
 }
 
-static int is_dirty_pte(unsigned long pte)
+static int is_dirty_gpte(unsigned long pte)
 {
 	return pte & PT_DIRTY_MASK;
 }
 
-static int is_rmap_pte(u64 pte)
+static int is_rmap_spte(u64 pte)
 {
 	return is_shadow_present_pte(pte);
 }
@@ -502,7 +502,7 @@ static int rmap_add(struct kvm_vcpu *vcpu, u64 *spte, gfn_t gfn, int lpage)
 	unsigned long *rmapp;
 	int i, count = 0;
 
-	if (!is_rmap_pte(*spte))
+	if (!is_rmap_spte(*spte))
 		return count;
 	gfn = unalias_gfn(vcpu->kvm, gfn);
 	sp = page_header(__pa(spte));
@@ -567,7 +567,7 @@ static void rmap_remove(struct kvm *kvm, u64 *spte)
 	unsigned long *rmapp;
 	int i;
 
-	if (!is_rmap_pte(*spte))
+	if (!is_rmap_spte(*spte))
 		return;
 	sp = page_header(__pa(spte));
 	pfn = spte_to_pfn(*spte);
@@ -1769,7 +1769,7 @@ static void mmu_set_spte(struct kvm_vcpu *vcpu, u64 *shadow_pte,
 		 __func__, *shadow_pte, pt_access,
 		 write_fault, user_fault, gfn);
 
-	if (is_rmap_pte(*shadow_pte)) {
+	if (is_rmap_spte(*shadow_pte)) {
 		/*
 		 * If we overwrite a PTE page pointer with a 2MB PMD, unlink
 		 * the parent of the now unreachable PTE.
@@ -1805,7 +1805,7 @@ static void mmu_set_spte(struct kvm_vcpu *vcpu, u64 *shadow_pte,
 	page_header_update_slot(vcpu->kvm, shadow_pte, gfn);
 	if (!was_rmapped) {
 		rmap_count = rmap_add(vcpu, shadow_pte, gfn, largepage);
-		if (!is_rmap_pte(*shadow_pte))
+		if (!is_rmap_spte(*shadow_pte))
 			kvm_release_pfn_clean(pfn);
 		if (rmap_count > RMAP_RECYCLE_THRESHOLD)
 			rmap_recycle(vcpu, gfn, largepage);
@@ -1984,7 +1984,7 @@ static int mmu_alloc_roots(struct kvm_vcpu *vcpu)
 		ASSERT(!VALID_PAGE(root));
 		if (vcpu->arch.mmu.root_level == PT32E_ROOT_LEVEL) {
 			pdptr = kvm_pdptr_read(vcpu, i);
-			if (!is_present_pte(pdptr)) {
+			if (!is_present_gpte(pdptr)) {
 				vcpu->arch.mmu.pae_root[i] = 0;
 				continue;
 			}
@@ -2475,7 +2475,7 @@ static void mmu_guess_page_from_pte_write(struct kvm_vcpu *vcpu, gpa_t gpa,
 		if ((bytes == 4) && (gpa % 4 == 0))
 			memcpy((void *)&gpte, new, 4);
 	}
-	if (!is_present_pte(gpte))
+	if (!is_present_gpte(gpte))
 		return;
 	gfn = (gpte & PT64_BASE_ADDR_MASK) >> PAGE_SHIFT;
 
diff --git a/arch/x86/kvm/mmu.h b/arch/x86/kvm/mmu.h
index 3494a2fb136..016bf7183e9 100644
--- a/arch/x86/kvm/mmu.h
+++ b/arch/x86/kvm/mmu.h
@@ -75,7 +75,7 @@ static inline int is_paging(struct kvm_vcpu *vcpu)
 	return vcpu->arch.cr0 & X86_CR0_PG;
 }
 
-static inline int is_present_pte(unsigned long pte)
+static inline int is_present_gpte(unsigned long pte)
 {
 	return pte & PT_PRESENT_MASK;
 }
diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h
index 4cb1dbfd7c2..238a193bbf5 100644
--- a/arch/x86/kvm/paging_tmpl.h
+++ b/arch/x86/kvm/paging_tmpl.h
@@ -132,7 +132,7 @@ walk:
 #if PTTYPE == 64
 	if (!is_long_mode(vcpu)) {
 		pte = kvm_pdptr_read(vcpu, (addr >> 30) & 3);
-		if (!is_present_pte(pte))
+		if (!is_present_gpte(pte))
 			goto not_present;
 		--walker->level;
 	}
@@ -155,7 +155,7 @@ walk:
 
 		kvm_read_guest(vcpu->kvm, pte_gpa, &pte, sizeof(pte));
 
-		if (!is_present_pte(pte))
+		if (!is_present_gpte(pte))
 			goto not_present;
 
 		rsvd_fault = is_rsvd_bits_set(vcpu, pte, walker->level);
@@ -205,7 +205,7 @@ walk:
 		--walker->level;
 	}
 
-	if (write_fault && !is_dirty_pte(pte)) {
+	if (write_fault && !is_dirty_gpte(pte)) {
 		bool ret;
 
 		mark_page_dirty(vcpu->kvm, table_gfn);
@@ -252,7 +252,7 @@ static void FNAME(update_pte)(struct kvm_vcpu *vcpu, struct kvm_mmu_page *page,
 
 	gpte = *(const pt_element_t *)pte;
 	if (~gpte & (PT_PRESENT_MASK | PT_ACCESSED_MASK)) {
-		if (!is_present_pte(gpte))
+		if (!is_present_gpte(gpte))
 			set_shadow_pte(spte, shadow_notrap_nonpresent_pte);
 		return;
 	}
@@ -289,7 +289,7 @@ static u64 *FNAME(fetch)(struct kvm_vcpu *vcpu, gva_t addr,
 	pt_element_t curr_pte;
 	struct kvm_shadow_walk_iterator iterator;
 
-	if (!is_present_pte(gw->ptes[gw->level - 1]))
+	if (!is_present_gpte(gw->ptes[gw->level - 1]))
 		return NULL;
 
 	for_each_shadow_entry(vcpu, addr, iterator) {
@@ -318,7 +318,7 @@ static u64 *FNAME(fetch)(struct kvm_vcpu *vcpu, gva_t addr,
 		if (level == PT_DIRECTORY_LEVEL
 		    && gw->level == PT_DIRECTORY_LEVEL) {
 			direct = 1;
-			if (!is_dirty_pte(gw->ptes[level - 1]))
+			if (!is_dirty_gpte(gw->ptes[level - 1]))
 				access &= ~ACC_WRITE_MASK;
 			table_gfn = gpte_to_gfn(gw->ptes[level - 1]);
 		} else {
@@ -489,7 +489,7 @@ static void FNAME(invlpg)(struct kvm_vcpu *vcpu, gva_t gva)
 	if (kvm_read_guest_atomic(vcpu->kvm, pte_gpa, &gpte,
 				  sizeof(pt_element_t)))
 		return;
-	if (is_present_pte(gpte) && (gpte & PT_ACCESSED_MASK)) {
+	if (is_present_gpte(gpte) && (gpte & PT_ACCESSED_MASK)) {
 		if (mmu_topup_memory_caches(vcpu))
 			return;
 		kvm_mmu_pte_write(vcpu, pte_gpa, (const u8 *)&gpte,
@@ -536,7 +536,7 @@ static void FNAME(prefetch_page)(struct kvm_vcpu *vcpu,
 		r = kvm_read_guest_atomic(vcpu->kvm, pte_gpa, pt, sizeof pt);
 		pte_gpa += ARRAY_SIZE(pt) * sizeof(pt_element_t);
 		for (j = 0; j < ARRAY_SIZE(pt); ++j)
-			if (r || is_present_pte(pt[j]))
+			if (r || is_present_gpte(pt[j]))
 				sp->spt[i+j] = shadow_trap_nonpresent_pte;
 			else
 				sp->spt[i+j] = shadow_notrap_nonpresent_pte;
@@ -574,12 +574,12 @@ static int FNAME(sync_page)(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp)
 					  sizeof(pt_element_t)))
 			return -EINVAL;
 
-		if (gpte_to_gfn(gpte) != gfn || !is_present_pte(gpte) ||
+		if (gpte_to_gfn(gpte) != gfn || !is_present_gpte(gpte) ||
 		    !(gpte & PT_ACCESSED_MASK)) {
 			u64 nonpresent;
 
 			rmap_remove(vcpu->kvm, &sp->spt[i]);
-			if (is_present_pte(gpte))
+			if (is_present_gpte(gpte))
 				nonpresent = shadow_trap_nonpresent_pte;
 			else
 				nonpresent = shadow_notrap_nonpresent_pte;
@@ -590,7 +590,7 @@ static int FNAME(sync_page)(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp)
 		nr_present++;
 		pte_access = sp->role.access & FNAME(gpte_access)(vcpu, gpte);
 		set_spte(vcpu, &sp->spt[i], pte_access, 0, 0,
-			 is_dirty_pte(gpte), 0, gfn,
+			 is_dirty_gpte(gpte), 0, gfn,
 			 spte_to_pfn(sp->spt[i]), true, false);
 	}
 
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 05cbe83c74e..e877efa3762 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -237,7 +237,7 @@ int load_pdptrs(struct kvm_vcpu *vcpu, unsigned long cr3)
 		goto out;
 	}
 	for (i = 0; i < ARRAY_SIZE(pdpte); ++i) {
-		if (is_present_pte(pdpte[i]) &&
+		if (is_present_gpte(pdpte[i]) &&
 		    (pdpte[i] & vcpu->arch.mmu.rsvd_bits_mask[0][2])) {
 			ret = 0;
 			goto out;
-- 
cgit v1.2.3


From d555c333aa544b222fe077adcd5dfea024b2c913 Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Wed, 10 Jun 2009 14:24:23 +0300
Subject: KVM: MMU: s/shadow_pte/spte/

We use shadow_pte and spte inconsistently, switch to the shorter spelling.

Rename set_shadow_pte() to __set_spte() to avoid a conflict with the
existing set_spte(), and to indicate its lowlevelness.

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/mmu.c         | 102 ++++++++++++++++++++++-----------------------
 arch/x86/kvm/paging_tmpl.h |  16 +++----
 2 files changed, 59 insertions(+), 59 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index a039e6bc21f..d443a421ca3 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -143,7 +143,7 @@ module_param(oos_shadow, bool, 0644);
 #define SHADOW_PT_INDEX(addr, level) PT64_INDEX(addr, level)
 
 struct kvm_rmap_desc {
-	u64 *shadow_ptes[RMAP_EXT];
+	u64 *sptes[RMAP_EXT];
 	struct kvm_rmap_desc *more;
 };
 
@@ -262,7 +262,7 @@ static gfn_t pse36_gfn_delta(u32 gpte)
 	return (gpte & PT32_DIR_PSE36_MASK) << shift;
 }
 
-static void set_shadow_pte(u64 *sptep, u64 spte)
+static void __set_spte(u64 *sptep, u64 spte)
 {
 #ifdef CONFIG_X86_64
 	set_64bit((unsigned long *)sptep, spte);
@@ -514,23 +514,23 @@ static int rmap_add(struct kvm_vcpu *vcpu, u64 *spte, gfn_t gfn, int lpage)
 	} else if (!(*rmapp & 1)) {
 		rmap_printk("rmap_add: %p %llx 1->many\n", spte, *spte);
 		desc = mmu_alloc_rmap_desc(vcpu);
-		desc->shadow_ptes[0] = (u64 *)*rmapp;
-		desc->shadow_ptes[1] = spte;
+		desc->sptes[0] = (u64 *)*rmapp;
+		desc->sptes[1] = spte;
 		*rmapp = (unsigned long)desc | 1;
 	} else {
 		rmap_printk("rmap_add: %p %llx many->many\n", spte, *spte);
 		desc = (struct kvm_rmap_desc *)(*rmapp & ~1ul);
-		while (desc->shadow_ptes[RMAP_EXT-1] && desc->more) {
+		while (desc->sptes[RMAP_EXT-1] && desc->more) {
 			desc = desc->more;
 			count += RMAP_EXT;
 		}
-		if (desc->shadow_ptes[RMAP_EXT-1]) {
+		if (desc->sptes[RMAP_EXT-1]) {
 			desc->more = mmu_alloc_rmap_desc(vcpu);
 			desc = desc->more;
 		}
-		for (i = 0; desc->shadow_ptes[i]; ++i)
+		for (i = 0; desc->sptes[i]; ++i)
 			;
-		desc->shadow_ptes[i] = spte;
+		desc->sptes[i] = spte;
 	}
 	return count;
 }
@@ -542,14 +542,14 @@ static void rmap_desc_remove_entry(unsigned long *rmapp,
 {
 	int j;
 
-	for (j = RMAP_EXT - 1; !desc->shadow_ptes[j] && j > i; --j)
+	for (j = RMAP_EXT - 1; !desc->sptes[j] && j > i; --j)
 		;
-	desc->shadow_ptes[i] = desc->shadow_ptes[j];
-	desc->shadow_ptes[j] = NULL;
+	desc->sptes[i] = desc->sptes[j];
+	desc->sptes[j] = NULL;
 	if (j != 0)
 		return;
 	if (!prev_desc && !desc->more)
-		*rmapp = (unsigned long)desc->shadow_ptes[0];
+		*rmapp = (unsigned long)desc->sptes[0];
 	else
 		if (prev_desc)
 			prev_desc->more = desc->more;
@@ -594,8 +594,8 @@ static void rmap_remove(struct kvm *kvm, u64 *spte)
 		desc = (struct kvm_rmap_desc *)(*rmapp & ~1ul);
 		prev_desc = NULL;
 		while (desc) {
-			for (i = 0; i < RMAP_EXT && desc->shadow_ptes[i]; ++i)
-				if (desc->shadow_ptes[i] == spte) {
+			for (i = 0; i < RMAP_EXT && desc->sptes[i]; ++i)
+				if (desc->sptes[i] == spte) {
 					rmap_desc_remove_entry(rmapp,
 							       desc, i,
 							       prev_desc);
@@ -626,10 +626,10 @@ static u64 *rmap_next(struct kvm *kvm, unsigned long *rmapp, u64 *spte)
 	prev_desc = NULL;
 	prev_spte = NULL;
 	while (desc) {
-		for (i = 0; i < RMAP_EXT && desc->shadow_ptes[i]; ++i) {
+		for (i = 0; i < RMAP_EXT && desc->sptes[i]; ++i) {
 			if (prev_spte == spte)
-				return desc->shadow_ptes[i];
-			prev_spte = desc->shadow_ptes[i];
+				return desc->sptes[i];
+			prev_spte = desc->sptes[i];
 		}
 		desc = desc->more;
 	}
@@ -651,7 +651,7 @@ static int rmap_write_protect(struct kvm *kvm, u64 gfn)
 		BUG_ON(!(*spte & PT_PRESENT_MASK));
 		rmap_printk("rmap_write_protect: spte %p %llx\n", spte, *spte);
 		if (is_writeble_pte(*spte)) {
-			set_shadow_pte(spte, *spte & ~PT_WRITABLE_MASK);
+			__set_spte(spte, *spte & ~PT_WRITABLE_MASK);
 			write_protected = 1;
 		}
 		spte = rmap_next(kvm, rmapp, spte);
@@ -675,7 +675,7 @@ static int rmap_write_protect(struct kvm *kvm, u64 gfn)
 		if (is_writeble_pte(*spte)) {
 			rmap_remove(kvm, spte);
 			--kvm->stat.lpages;
-			set_shadow_pte(spte, shadow_trap_nonpresent_pte);
+			__set_spte(spte, shadow_trap_nonpresent_pte);
 			spte = NULL;
 			write_protected = 1;
 		}
@@ -694,7 +694,7 @@ static int kvm_unmap_rmapp(struct kvm *kvm, unsigned long *rmapp)
 		BUG_ON(!(*spte & PT_PRESENT_MASK));
 		rmap_printk("kvm_rmap_unmap_hva: spte %p %llx\n", spte, *spte);
 		rmap_remove(kvm, spte);
-		set_shadow_pte(spte, shadow_trap_nonpresent_pte);
+		__set_spte(spte, shadow_trap_nonpresent_pte);
 		need_tlb_flush = 1;
 	}
 	return need_tlb_flush;
@@ -1369,7 +1369,7 @@ static void kvm_mmu_unlink_parents(struct kvm *kvm, struct kvm_mmu_page *sp)
 		}
 		BUG_ON(!parent_pte);
 		kvm_mmu_put_page(sp, parent_pte);
-		set_shadow_pte(parent_pte, shadow_trap_nonpresent_pte);
+		__set_spte(parent_pte, shadow_trap_nonpresent_pte);
 	}
 }
 
@@ -1517,7 +1517,7 @@ static void mmu_convert_notrap(struct kvm_mmu_page *sp)
 
 	for (i = 0; i < PT64_ENT_PER_PAGE; ++i) {
 		if (pt[i] == shadow_notrap_nonpresent_pte)
-			set_shadow_pte(&pt[i], shadow_trap_nonpresent_pte);
+			__set_spte(&pt[i], shadow_trap_nonpresent_pte);
 	}
 }
 
@@ -1683,7 +1683,7 @@ static int mmu_need_write_protect(struct kvm_vcpu *vcpu, gfn_t gfn,
 	return 0;
 }
 
-static int set_spte(struct kvm_vcpu *vcpu, u64 *shadow_pte,
+static int set_spte(struct kvm_vcpu *vcpu, u64 *sptep,
 		    unsigned pte_access, int user_fault,
 		    int write_fault, int dirty, int largepage,
 		    gfn_t gfn, pfn_t pfn, bool speculative,
@@ -1733,7 +1733,7 @@ static int set_spte(struct kvm_vcpu *vcpu, u64 *shadow_pte,
 		 * is responsibility of mmu_get_page / kvm_sync_page.
 		 * Same reasoning can be applied to dirty page accounting.
 		 */
-		if (!can_unsync && is_writeble_pte(*shadow_pte))
+		if (!can_unsync && is_writeble_pte(*sptep))
 			goto set_pte;
 
 		if (mmu_need_write_protect(vcpu, gfn, can_unsync)) {
@@ -1750,62 +1750,62 @@ static int set_spte(struct kvm_vcpu *vcpu, u64 *shadow_pte,
 		mark_page_dirty(vcpu->kvm, gfn);
 
 set_pte:
-	set_shadow_pte(shadow_pte, spte);
+	__set_spte(sptep, spte);
 	return ret;
 }
 
-static void mmu_set_spte(struct kvm_vcpu *vcpu, u64 *shadow_pte,
+static void mmu_set_spte(struct kvm_vcpu *vcpu, u64 *sptep,
 			 unsigned pt_access, unsigned pte_access,
 			 int user_fault, int write_fault, int dirty,
 			 int *ptwrite, int largepage, gfn_t gfn,
 			 pfn_t pfn, bool speculative)
 {
 	int was_rmapped = 0;
-	int was_writeble = is_writeble_pte(*shadow_pte);
+	int was_writeble = is_writeble_pte(*sptep);
 	int rmap_count;
 
 	pgprintk("%s: spte %llx access %x write_fault %d"
 		 " user_fault %d gfn %lx\n",
-		 __func__, *shadow_pte, pt_access,
+		 __func__, *sptep, pt_access,
 		 write_fault, user_fault, gfn);
 
-	if (is_rmap_spte(*shadow_pte)) {
+	if (is_rmap_spte(*sptep)) {
 		/*
 		 * If we overwrite a PTE page pointer with a 2MB PMD, unlink
 		 * the parent of the now unreachable PTE.
 		 */
-		if (largepage && !is_large_pte(*shadow_pte)) {
+		if (largepage && !is_large_pte(*sptep)) {
 			struct kvm_mmu_page *child;
-			u64 pte = *shadow_pte;
+			u64 pte = *sptep;
 
 			child = page_header(pte & PT64_BASE_ADDR_MASK);
-			mmu_page_remove_parent_pte(child, shadow_pte);
-		} else if (pfn != spte_to_pfn(*shadow_pte)) {
+			mmu_page_remove_parent_pte(child, sptep);
+		} else if (pfn != spte_to_pfn(*sptep)) {
 			pgprintk("hfn old %lx new %lx\n",
-				 spte_to_pfn(*shadow_pte), pfn);
-			rmap_remove(vcpu->kvm, shadow_pte);
+				 spte_to_pfn(*sptep), pfn);
+			rmap_remove(vcpu->kvm, sptep);
 		} else
 			was_rmapped = 1;
 	}
-	if (set_spte(vcpu, shadow_pte, pte_access, user_fault, write_fault,
+	if (set_spte(vcpu, sptep, pte_access, user_fault, write_fault,
 		      dirty, largepage, gfn, pfn, speculative, true)) {
 		if (write_fault)
 			*ptwrite = 1;
 		kvm_x86_ops->tlb_flush(vcpu);
 	}
 
-	pgprintk("%s: setting spte %llx\n", __func__, *shadow_pte);
+	pgprintk("%s: setting spte %llx\n", __func__, *sptep);
 	pgprintk("instantiating %s PTE (%s) at %ld (%llx) addr %p\n",
-		 is_large_pte(*shadow_pte)? "2MB" : "4kB",
-		 is_present_pte(*shadow_pte)?"RW":"R", gfn,
-		 *shadow_pte, shadow_pte);
-	if (!was_rmapped && is_large_pte(*shadow_pte))
+		 is_large_pte(*sptep)? "2MB" : "4kB",
+		 is_present_pte(*sptep)?"RW":"R", gfn,
+		 *shadow_pte, sptep);
+	if (!was_rmapped && is_large_pte(*sptep))
 		++vcpu->kvm->stat.lpages;
 
-	page_header_update_slot(vcpu->kvm, shadow_pte, gfn);
+	page_header_update_slot(vcpu->kvm, sptep, gfn);
 	if (!was_rmapped) {
-		rmap_count = rmap_add(vcpu, shadow_pte, gfn, largepage);
-		if (!is_rmap_spte(*shadow_pte))
+		rmap_count = rmap_add(vcpu, sptep, gfn, largepage);
+		if (!is_rmap_spte(*sptep))
 			kvm_release_pfn_clean(pfn);
 		if (rmap_count > RMAP_RECYCLE_THRESHOLD)
 			rmap_recycle(vcpu, gfn, largepage);
@@ -1816,7 +1816,7 @@ static void mmu_set_spte(struct kvm_vcpu *vcpu, u64 *shadow_pte,
 			kvm_release_pfn_clean(pfn);
 	}
 	if (speculative) {
-		vcpu->arch.last_pte_updated = shadow_pte;
+		vcpu->arch.last_pte_updated = sptep;
 		vcpu->arch.last_pte_gfn = gfn;
 	}
 }
@@ -1854,10 +1854,10 @@ static int __direct_map(struct kvm_vcpu *vcpu, gpa_t v, int write,
 				return -ENOMEM;
 			}
 
-			set_shadow_pte(iterator.sptep,
-				       __pa(sp->spt)
-				       | PT_PRESENT_MASK | PT_WRITABLE_MASK
-				       | shadow_user_mask | shadow_x_mask);
+			__set_spte(iterator.sptep,
+				   __pa(sp->spt)
+				   | PT_PRESENT_MASK | PT_WRITABLE_MASK
+				   | shadow_user_mask | shadow_x_mask);
 		}
 	}
 	return pt_write;
@@ -2389,7 +2389,7 @@ static void mmu_pte_write_zap_pte(struct kvm_vcpu *vcpu,
 			mmu_page_remove_parent_pte(child, spte);
 		}
 	}
-	set_shadow_pte(spte, shadow_trap_nonpresent_pte);
+	__set_spte(spte, shadow_trap_nonpresent_pte);
 	if (is_large_pte(pte))
 		--vcpu->kvm->stat.lpages;
 }
@@ -3125,7 +3125,7 @@ static int count_rmaps(struct kvm_vcpu *vcpu)
 			d = (struct kvm_rmap_desc *)(*rmapp & ~1ul);
 			while (d) {
 				for (k = 0; k < RMAP_EXT; ++k)
-					if (d->shadow_ptes[k])
+					if (d->sptes[k])
 						++nmaps;
 					else
 						break;
diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h
index 238a193bbf5..322e8113aee 100644
--- a/arch/x86/kvm/paging_tmpl.h
+++ b/arch/x86/kvm/paging_tmpl.h
@@ -253,7 +253,7 @@ static void FNAME(update_pte)(struct kvm_vcpu *vcpu, struct kvm_mmu_page *page,
 	gpte = *(const pt_element_t *)pte;
 	if (~gpte & (PT_PRESENT_MASK | PT_ACCESSED_MASK)) {
 		if (!is_present_gpte(gpte))
-			set_shadow_pte(spte, shadow_notrap_nonpresent_pte);
+			__set_spte(spte, shadow_notrap_nonpresent_pte);
 		return;
 	}
 	pgprintk("%s: gpte %llx spte %p\n", __func__, (u64)gpte, spte);
@@ -311,7 +311,7 @@ static u64 *FNAME(fetch)(struct kvm_vcpu *vcpu, gva_t addr,
 
 		if (is_large_pte(*sptep)) {
 			rmap_remove(vcpu->kvm, sptep);
-			set_shadow_pte(sptep, shadow_trap_nonpresent_pte);
+			__set_spte(sptep, shadow_trap_nonpresent_pte);
 			kvm_flush_remote_tlbs(vcpu->kvm);
 		}
 
@@ -369,7 +369,7 @@ static int FNAME(page_fault)(struct kvm_vcpu *vcpu, gva_t addr,
 	int user_fault = error_code & PFERR_USER_MASK;
 	int fetch_fault = error_code & PFERR_FETCH_MASK;
 	struct guest_walker walker;
-	u64 *shadow_pte;
+	u64 *sptep;
 	int write_pt = 0;
 	int r;
 	pfn_t pfn;
@@ -422,11 +422,11 @@ static int FNAME(page_fault)(struct kvm_vcpu *vcpu, gva_t addr,
 	if (mmu_notifier_retry(vcpu, mmu_seq))
 		goto out_unlock;
 	kvm_mmu_free_some_pages(vcpu);
-	shadow_pte = FNAME(fetch)(vcpu, addr, &walker, user_fault, write_fault,
-				  largepage, &write_pt, pfn);
+	sptep = FNAME(fetch)(vcpu, addr, &walker, user_fault, write_fault,
+			     largepage, &write_pt, pfn);
 
 	pgprintk("%s: shadow pte %p %llx ptwrite %d\n", __func__,
-		 shadow_pte, *shadow_pte, write_pt);
+		 sptep, *sptep, write_pt);
 
 	if (!write_pt)
 		vcpu->arch.last_pt_write_count = 0; /* reset fork detector */
@@ -472,7 +472,7 @@ static void FNAME(invlpg)(struct kvm_vcpu *vcpu, gva_t gva)
 					--vcpu->kvm->stat.lpages;
 				need_flush = 1;
 			}
-			set_shadow_pte(sptep, shadow_trap_nonpresent_pte);
+			__set_spte(sptep, shadow_trap_nonpresent_pte);
 			break;
 		}
 
@@ -583,7 +583,7 @@ static int FNAME(sync_page)(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp)
 				nonpresent = shadow_trap_nonpresent_pte;
 			else
 				nonpresent = shadow_notrap_nonpresent_pte;
-			set_shadow_pte(&sp->spt[i], nonpresent);
+			__set_spte(&sp->spt[i], nonpresent);
 			continue;
 		}
 
-- 
cgit v1.2.3


From c5af89b68abb26eea5e745f33228f4d672f115e5 Mon Sep 17 00:00:00 2001
From: Gleb Natapov <gleb@redhat.com>
Date: Tue, 9 Jun 2009 15:56:26 +0300
Subject: KVM: Introduce kvm_vcpu_is_bsp() function.

Use it instead of open code "vcpu_id zero is BSP" assumption.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/ia64/kvm/kvm-ia64.c | 2 +-
 arch/ia64/kvm/vcpu.c     | 2 +-
 arch/x86/kvm/i8254.c     | 4 ++--
 arch/x86/kvm/i8259.c     | 6 +++---
 arch/x86/kvm/lapic.c     | 7 ++++---
 arch/x86/kvm/svm.c       | 4 ++--
 arch/x86/kvm/vmx.c       | 6 +++---
 arch/x86/kvm/x86.c       | 4 ++--
 8 files changed, 18 insertions(+), 17 deletions(-)

(limited to 'arch')

diff --git a/arch/ia64/kvm/kvm-ia64.c b/arch/ia64/kvm/kvm-ia64.c
index 8dde36953af..4082665ace0 100644
--- a/arch/ia64/kvm/kvm-ia64.c
+++ b/arch/ia64/kvm/kvm-ia64.c
@@ -1216,7 +1216,7 @@ int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu)
 	if (IS_ERR(vmm_vcpu))
 		return PTR_ERR(vmm_vcpu);
 
-	if (vcpu->vcpu_id == 0) {
+	if (kvm_vcpu_is_bsp(vcpu)) {
 		vcpu->arch.mp_state = KVM_MP_STATE_RUNNABLE;
 
 		/*Set entry address for first run.*/
diff --git a/arch/ia64/kvm/vcpu.c b/arch/ia64/kvm/vcpu.c
index cc406d064a0..61a3320b62c 100644
--- a/arch/ia64/kvm/vcpu.c
+++ b/arch/ia64/kvm/vcpu.c
@@ -830,7 +830,7 @@ static void vcpu_set_itc(struct kvm_vcpu *vcpu, u64 val)
 
 	kvm = (struct kvm *)KVM_VM_BASE;
 
-	if (vcpu->vcpu_id == 0) {
+	if (kvm_vcpu_is_bsp(vcpu)) {
 		for (i = 0; i < kvm->arch.online_vcpus; i++) {
 			v = (struct kvm_vcpu *)((char *)vcpu +
 					sizeof(struct kvm_vcpu_data) * i);
diff --git a/arch/x86/kvm/i8254.c b/arch/x86/kvm/i8254.c
index 3837db65d33..008a8318506 100644
--- a/arch/x86/kvm/i8254.c
+++ b/arch/x86/kvm/i8254.c
@@ -231,7 +231,7 @@ int pit_has_pending_timer(struct kvm_vcpu *vcpu)
 {
 	struct kvm_pit *pit = vcpu->kvm->arch.vpit;
 
-	if (pit && vcpu->vcpu_id == 0 && pit->pit_state.irq_ack)
+	if (pit && kvm_vcpu_is_bsp(vcpu) && pit->pit_state.irq_ack)
 		return atomic_read(&pit->pit_state.pit_timer.pending);
 	return 0;
 }
@@ -252,7 +252,7 @@ void __kvm_migrate_pit_timer(struct kvm_vcpu *vcpu)
 	struct kvm_pit *pit = vcpu->kvm->arch.vpit;
 	struct hrtimer *timer;
 
-	if (vcpu->vcpu_id != 0 || !pit)
+	if (!kvm_vcpu_is_bsp(vcpu) || !pit)
 		return;
 
 	timer = &pit->pit_state.pit_timer.timer;
diff --git a/arch/x86/kvm/i8259.c b/arch/x86/kvm/i8259.c
index bf94a45f4f8..148c52a608d 100644
--- a/arch/x86/kvm/i8259.c
+++ b/arch/x86/kvm/i8259.c
@@ -57,7 +57,7 @@ static void pic_unlock(struct kvm_pic *s)
 	}
 
 	if (wakeup) {
-		vcpu = s->kvm->vcpus[0];
+		vcpu = s->kvm->bsp_vcpu;
 		if (vcpu)
 			kvm_vcpu_kick(vcpu);
 	}
@@ -254,7 +254,7 @@ void kvm_pic_reset(struct kvm_kpic_state *s)
 {
 	int irq, irqbase, n;
 	struct kvm *kvm = s->pics_state->irq_request_opaque;
-	struct kvm_vcpu *vcpu0 = kvm->vcpus[0];
+	struct kvm_vcpu *vcpu0 = kvm->bsp_vcpu;
 
 	if (s == &s->pics_state->pics[0])
 		irqbase = 0;
@@ -512,7 +512,7 @@ static void picdev_read(struct kvm_io_device *this,
 static void pic_irq_request(void *opaque, int level)
 {
 	struct kvm *kvm = opaque;
-	struct kvm_vcpu *vcpu = kvm->vcpus[0];
+	struct kvm_vcpu *vcpu = kvm->bsp_vcpu;
 	struct kvm_pic *s = pic_irqchip(kvm);
 	int irq = pic_get_irq(&s->pics[0]);
 
diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index 44f20cdb570..b0661300eb2 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -793,7 +793,8 @@ void kvm_lapic_set_base(struct kvm_vcpu *vcpu, u64 value)
 		vcpu->arch.apic_base = value;
 		return;
 	}
-	if (apic->vcpu->vcpu_id)
+
+	if (!kvm_vcpu_is_bsp(apic->vcpu))
 		value &= ~MSR_IA32_APICBASE_BSP;
 
 	vcpu->arch.apic_base = value;
@@ -844,7 +845,7 @@ void kvm_lapic_reset(struct kvm_vcpu *vcpu)
 	}
 	update_divide_count(apic);
 	atomic_set(&apic->lapic_timer.pending, 0);
-	if (vcpu->vcpu_id == 0)
+	if (kvm_vcpu_is_bsp(vcpu))
 		vcpu->arch.apic_base |= MSR_IA32_APICBASE_BSP;
 	apic_update_ppr(apic);
 
@@ -985,7 +986,7 @@ int kvm_apic_accept_pic_intr(struct kvm_vcpu *vcpu)
 	u32 lvt0 = apic_get_reg(vcpu->arch.apic, APIC_LVT0);
 	int r = 0;
 
-	if (vcpu->vcpu_id == 0) {
+	if (kvm_vcpu_is_bsp(vcpu)) {
 		if (!apic_hw_enabled(vcpu->arch.apic))
 			r = 1;
 		if ((lvt0 & APIC_LVT_MASKED) == 0 &&
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 7749b0692cb..28b981409a8 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -642,7 +642,7 @@ static int svm_vcpu_reset(struct kvm_vcpu *vcpu)
 
 	init_vmcb(svm);
 
-	if (vcpu->vcpu_id != 0) {
+	if (!kvm_vcpu_is_bsp(vcpu)) {
 		kvm_rip_write(vcpu, 0);
 		svm->vmcb->save.cs.base = svm->vcpu.arch.sipi_vector << 12;
 		svm->vmcb->save.cs.selector = svm->vcpu.arch.sipi_vector << 8;
@@ -706,7 +706,7 @@ static struct kvm_vcpu *svm_create_vcpu(struct kvm *kvm, unsigned int id)
 	fx_init(&svm->vcpu);
 	svm->vcpu.fpu_active = 1;
 	svm->vcpu.arch.apic_base = 0xfee00000 | MSR_IA32_APICBASE_ENABLE;
-	if (svm->vcpu.vcpu_id == 0)
+	if (kvm_vcpu_is_bsp(&svm->vcpu))
 		svm->vcpu.arch.apic_base |= MSR_IA32_APICBASE_BSP;
 
 	return &svm->vcpu;
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index ae682929a64..c08bb4cf372 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -2411,7 +2411,7 @@ static int vmx_vcpu_reset(struct kvm_vcpu *vcpu)
 	vmx->vcpu.arch.regs[VCPU_REGS_RDX] = get_rdx_init_val();
 	kvm_set_cr8(&vmx->vcpu, 0);
 	msr = 0xfee00000 | MSR_IA32_APICBASE_ENABLE;
-	if (vmx->vcpu.vcpu_id == 0)
+	if (kvm_vcpu_is_bsp(&vmx->vcpu))
 		msr |= MSR_IA32_APICBASE_BSP;
 	kvm_set_apic_base(&vmx->vcpu, msr);
 
@@ -2422,7 +2422,7 @@ static int vmx_vcpu_reset(struct kvm_vcpu *vcpu)
 	 * GUEST_CS_BASE should really be 0xffff0000, but VT vm86 mode
 	 * insists on having GUEST_CS_BASE == GUEST_CS_SELECTOR << 4.  Sigh.
 	 */
-	if (vmx->vcpu.vcpu_id == 0) {
+	if (kvm_vcpu_is_bsp(&vmx->vcpu)) {
 		vmcs_write16(GUEST_CS_SELECTOR, 0xf000);
 		vmcs_writel(GUEST_CS_BASE, 0x000f0000);
 	} else {
@@ -2451,7 +2451,7 @@ static int vmx_vcpu_reset(struct kvm_vcpu *vcpu)
 	vmcs_writel(GUEST_SYSENTER_EIP, 0);
 
 	vmcs_writel(GUEST_RFLAGS, 0x02);
-	if (vmx->vcpu.vcpu_id == 0)
+	if (kvm_vcpu_is_bsp(&vmx->vcpu))
 		kvm_rip_write(vcpu, 0xfff0);
 	else
 		kvm_rip_write(vcpu, 0);
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index e877efa3762..d8adc1da76d 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -4330,7 +4330,7 @@ int kvm_arch_vcpu_ioctl_set_sregs(struct kvm_vcpu *vcpu,
 	kvm_set_segment(vcpu, &sregs->ldt, VCPU_SREG_LDTR);
 
 	/* Older userspace won't unhalt the vcpu on reset. */
-	if (vcpu->vcpu_id == 0 && kvm_rip_read(vcpu) == 0xfff0 &&
+	if (kvm_vcpu_is_bsp(vcpu) && kvm_rip_read(vcpu) == 0xfff0 &&
 	    sregs->cs.selector == 0xf000 && sregs->cs.base == 0xffff0000 &&
 	    !(vcpu->arch.cr0 & X86_CR0_PE))
 		vcpu->arch.mp_state = KVM_MP_STATE_RUNNABLE;
@@ -4601,7 +4601,7 @@ int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu)
 	kvm = vcpu->kvm;
 
 	vcpu->arch.mmu.root_hpa = INVALID_PAGE;
-	if (!irqchip_in_kernel(kvm) || vcpu->vcpu_id == 0)
+	if (!irqchip_in_kernel(kvm) || kvm_vcpu_is_bsp(vcpu))
 		vcpu->arch.mp_state = KVM_MP_STATE_RUNNABLE;
 	else
 		vcpu->arch.mp_state = KVM_MP_STATE_UNINITIALIZED;
-- 
cgit v1.2.3


From 1ed0ce000a6c20c36ec649e32fc24393ef418ed8 Mon Sep 17 00:00:00 2001
From: Gleb Natapov <gleb@redhat.com>
Date: Tue, 9 Jun 2009 15:56:27 +0300
Subject: KVM: Use pointer to vcpu instead of vcpu_id in timer code.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/i8254.c     | 2 +-
 arch/x86/kvm/kvm_timer.h | 2 +-
 arch/x86/kvm/lapic.c     | 2 +-
 arch/x86/kvm/timer.c     | 2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/i8254.c b/arch/x86/kvm/i8254.c
index 008a8318506..06d8f84ae8a 100644
--- a/arch/x86/kvm/i8254.c
+++ b/arch/x86/kvm/i8254.c
@@ -294,7 +294,7 @@ static void create_pit_timer(struct kvm_kpit_state *ps, u32 val, int is_period)
 	pt->timer.function = kvm_timer_fn;
 	pt->t_ops = &kpit_ops;
 	pt->kvm = ps->pit->kvm;
-	pt->vcpu_id = 0;
+	pt->vcpu = pt->kvm->bsp_vcpu;
 
 	atomic_set(&pt->pending, 0);
 	ps->irq_ack = 1;
diff --git a/arch/x86/kvm/kvm_timer.h b/arch/x86/kvm/kvm_timer.h
index 26bd6ba74e1..55c7524dda5 100644
--- a/arch/x86/kvm/kvm_timer.h
+++ b/arch/x86/kvm/kvm_timer.h
@@ -6,7 +6,7 @@ struct kvm_timer {
 	bool reinject;
 	struct kvm_timer_ops *t_ops;
 	struct kvm *kvm;
-	int vcpu_id;
+	struct kvm_vcpu *vcpu;
 };
 
 struct kvm_timer_ops {
diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index b0661300eb2..b1694dc4572 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -950,7 +950,7 @@ int kvm_create_lapic(struct kvm_vcpu *vcpu)
 	apic->lapic_timer.timer.function = kvm_timer_fn;
 	apic->lapic_timer.t_ops = &lapic_timer_ops;
 	apic->lapic_timer.kvm = vcpu->kvm;
-	apic->lapic_timer.vcpu_id = vcpu->vcpu_id;
+	apic->lapic_timer.vcpu = vcpu;
 
 	apic->base_address = APIC_DEFAULT_PHYS_BASE;
 	vcpu->arch.apic_base = APIC_DEFAULT_PHYS_BASE;
diff --git a/arch/x86/kvm/timer.c b/arch/x86/kvm/timer.c
index 86dbac072d0..85cc743a820 100644
--- a/arch/x86/kvm/timer.c
+++ b/arch/x86/kvm/timer.c
@@ -33,7 +33,7 @@ enum hrtimer_restart kvm_timer_fn(struct hrtimer *data)
 	struct kvm_vcpu *vcpu;
 	struct kvm_timer *ktimer = container_of(data, struct kvm_timer, timer);
 
-	vcpu = ktimer->kvm->vcpus[ktimer->vcpu_id];
+	vcpu = ktimer->vcpu;
 	if (!vcpu)
 		return HRTIMER_NORESTART;
 
-- 
cgit v1.2.3


From 73880c80aa9c8dc353cd0ad26579023213cd5314 Mon Sep 17 00:00:00 2001
From: Gleb Natapov <gleb@redhat.com>
Date: Tue, 9 Jun 2009 15:56:28 +0300
Subject: KVM: Break dependency between vcpu index in vcpus array and vcpu_id.

Archs are free to use vcpu_id as they see fit. For x86 it is used as
vcpu's apic id. New ioctl is added to configure boot vcpu id that was
assumed to be 0 till now.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/ia64/include/asm/kvm_host.h | 1 -
 arch/ia64/kvm/Kconfig            | 1 +
 arch/ia64/kvm/kvm-ia64.c         | 8 ++------
 arch/ia64/kvm/vcpu.c             | 2 +-
 arch/x86/kvm/Kconfig             | 1 +
 5 files changed, 5 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/ia64/include/asm/kvm_host.h b/arch/ia64/include/asm/kvm_host.h
index 5f43697aed3..9cf1c4b1f92 100644
--- a/arch/ia64/include/asm/kvm_host.h
+++ b/arch/ia64/include/asm/kvm_host.h
@@ -465,7 +465,6 @@ struct kvm_arch {
 	unsigned long	metaphysical_rr4;
 	unsigned long	vmm_init_rr;
 
-	int		online_vcpus;
 	int		is_sn2;
 
 	struct kvm_ioapic *vioapic;
diff --git a/arch/ia64/kvm/Kconfig b/arch/ia64/kvm/Kconfig
index f922bbba379..cbadd8a6523 100644
--- a/arch/ia64/kvm/Kconfig
+++ b/arch/ia64/kvm/Kconfig
@@ -25,6 +25,7 @@ config KVM
 	select PREEMPT_NOTIFIERS
 	select ANON_INODES
 	select HAVE_KVM_IRQCHIP
+	select KVM_APIC_ARCHITECTURE
 	---help---
 	  Support hosting fully virtualized guest machines using hardware
 	  virtualization extensions.  You will need a fairly recent
diff --git a/arch/ia64/kvm/kvm-ia64.c b/arch/ia64/kvm/kvm-ia64.c
index 4082665ace0..d1f7bcda2c7 100644
--- a/arch/ia64/kvm/kvm-ia64.c
+++ b/arch/ia64/kvm/kvm-ia64.c
@@ -338,7 +338,7 @@ static struct kvm_vcpu *lid_to_vcpu(struct kvm *kvm, unsigned long id,
 	union ia64_lid lid;
 	int i;
 
-	for (i = 0; i < kvm->arch.online_vcpus; i++) {
+	for (i = 0; i < atomic_read(&kvm->online_vcpus); i++) {
 		if (kvm->vcpus[i]) {
 			lid.val = VCPU_LID(kvm->vcpus[i]);
 			if (lid.id == id && lid.eid == eid)
@@ -412,7 +412,7 @@ static int handle_global_purge(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 
 	call_data.ptc_g_data = p->u.ptc_g_data;
 
-	for (i = 0; i < kvm->arch.online_vcpus; i++) {
+	for (i = 0; i < atomic_read(&kvm->online_vcpus); i++) {
 		if (!kvm->vcpus[i] || kvm->vcpus[i]->arch.mp_state ==
 						KVM_MP_STATE_UNINITIALIZED ||
 					vcpu == kvm->vcpus[i])
@@ -852,8 +852,6 @@ struct  kvm *kvm_arch_create_vm(void)
 
 	kvm_init_vm(kvm);
 
-	kvm->arch.online_vcpus = 0;
-
 	return kvm;
 
 }
@@ -1356,8 +1354,6 @@ struct kvm_vcpu *kvm_arch_vcpu_create(struct kvm *kvm,
 		goto fail;
 	}
 
-	kvm->arch.online_vcpus++;
-
 	return vcpu;
 fail:
 	return ERR_PTR(r);
diff --git a/arch/ia64/kvm/vcpu.c b/arch/ia64/kvm/vcpu.c
index 61a3320b62c..dce75b70cdd 100644
--- a/arch/ia64/kvm/vcpu.c
+++ b/arch/ia64/kvm/vcpu.c
@@ -831,7 +831,7 @@ static void vcpu_set_itc(struct kvm_vcpu *vcpu, u64 val)
 	kvm = (struct kvm *)KVM_VM_BASE;
 
 	if (kvm_vcpu_is_bsp(vcpu)) {
-		for (i = 0; i < kvm->arch.online_vcpus; i++) {
+		for (i = 0; i < atomic_read(&kvm->online_vcpus); i++) {
 			v = (struct kvm_vcpu *)((char *)vcpu +
 					sizeof(struct kvm_vcpu_data) * i);
 			VMX(v, itc_offset) = itc_offset;
diff --git a/arch/x86/kvm/Kconfig b/arch/x86/kvm/Kconfig
index 8cd2a4efe23..7fbedfd34d6 100644
--- a/arch/x86/kvm/Kconfig
+++ b/arch/x86/kvm/Kconfig
@@ -27,6 +27,7 @@ config KVM
 	select ANON_INODES
 	select HAVE_KVM_IRQCHIP
 	select HAVE_KVM_EVENTFD
+	select KVM_APIC_ARCHITECTURE
 	---help---
 	  Support hosting fully virtualized guest machines using hardware
 	  virtualization extensions.  You will need a fairly recent
-- 
cgit v1.2.3


From 988a2cae6a3c0dea6df59808a935a9a697bfc28c Mon Sep 17 00:00:00 2001
From: Gleb Natapov <gleb@redhat.com>
Date: Tue, 9 Jun 2009 15:56:29 +0300
Subject: KVM: Use macro to iterate over vcpus.

[christian: remove unused variables on s390]

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/ia64/kvm/kvm-ia64.c   | 29 ++++++++++++++---------------
 arch/powerpc/kvm/powerpc.c | 16 ++++++++++------
 arch/s390/kvm/kvm-s390.c   | 31 +++++++++++++++----------------
 arch/x86/kvm/i8254.c       |  7 ++-----
 arch/x86/kvm/mmu.c         |  6 +++---
 arch/x86/kvm/x86.c         | 25 ++++++++++++-------------
 6 files changed, 56 insertions(+), 58 deletions(-)

(limited to 'arch')

diff --git a/arch/ia64/kvm/kvm-ia64.c b/arch/ia64/kvm/kvm-ia64.c
index d1f7bcda2c7..5c766bd82b0 100644
--- a/arch/ia64/kvm/kvm-ia64.c
+++ b/arch/ia64/kvm/kvm-ia64.c
@@ -337,13 +337,12 @@ static struct kvm_vcpu *lid_to_vcpu(struct kvm *kvm, unsigned long id,
 {
 	union ia64_lid lid;
 	int i;
+	struct kvm_vcpu *vcpu;
 
-	for (i = 0; i < atomic_read(&kvm->online_vcpus); i++) {
-		if (kvm->vcpus[i]) {
-			lid.val = VCPU_LID(kvm->vcpus[i]);
-			if (lid.id == id && lid.eid == eid)
-				return kvm->vcpus[i];
-		}
+	kvm_for_each_vcpu(i, vcpu, kvm) {
+		lid.val = VCPU_LID(vcpu);
+		if (lid.id == id && lid.eid == eid)
+			return vcpu;
 	}
 
 	return NULL;
@@ -409,21 +408,21 @@ static int handle_global_purge(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	struct kvm *kvm = vcpu->kvm;
 	struct call_data call_data;
 	int i;
+	struct kvm_vcpu *vcpui;
 
 	call_data.ptc_g_data = p->u.ptc_g_data;
 
-	for (i = 0; i < atomic_read(&kvm->online_vcpus); i++) {
-		if (!kvm->vcpus[i] || kvm->vcpus[i]->arch.mp_state ==
-						KVM_MP_STATE_UNINITIALIZED ||
-					vcpu == kvm->vcpus[i])
+	kvm_for_each_vcpu(i, vcpui, kvm) {
+		if (vcpui->arch.mp_state == KVM_MP_STATE_UNINITIALIZED ||
+				vcpu == vcpui)
 			continue;
 
-		if (waitqueue_active(&kvm->vcpus[i]->wq))
-			wake_up_interruptible(&kvm->vcpus[i]->wq);
+		if (waitqueue_active(&vcpui->wq))
+			wake_up_interruptible(&vcpui->wq);
 
-		if (kvm->vcpus[i]->cpu != -1) {
-			call_data.vcpu = kvm->vcpus[i];
-			smp_call_function_single(kvm->vcpus[i]->cpu,
+		if (vcpui->cpu != -1) {
+			call_data.vcpu = vcpui;
+			smp_call_function_single(vcpui->cpu,
 					vcpu_global_purge, &call_data, 1);
 		} else
 			printk(KERN_WARNING"kvm: Uninit vcpu received ipi!\n");
diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c
index 2cf915e51e7..7ad30e0a1b9 100644
--- a/arch/powerpc/kvm/powerpc.c
+++ b/arch/powerpc/kvm/powerpc.c
@@ -122,13 +122,17 @@ struct kvm *kvm_arch_create_vm(void)
 static void kvmppc_free_vcpus(struct kvm *kvm)
 {
 	unsigned int i;
+	struct kvm_vcpu *vcpu;
 
-	for (i = 0; i < KVM_MAX_VCPUS; ++i) {
-		if (kvm->vcpus[i]) {
-			kvm_arch_vcpu_free(kvm->vcpus[i]);
-			kvm->vcpus[i] = NULL;
-		}
-	}
+	kvm_for_each_vcpu(i, vcpu, kvm)
+		kvm_arch_vcpu_free(vcpu);
+
+	mutex_lock(&kvm->lock);
+	for (i = 0; i < atomic_read(&kvm->online_vcpus); i++)
+		kvm->vcpus[i] = NULL;
+
+	atomic_set(&kvm->online_vcpus, 0);
+	mutex_unlock(&kvm->lock);
 }
 
 void kvm_arch_sync_events(struct kvm *kvm)
diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index 098bfa6fbdf..07ced89740d 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -211,13 +211,17 @@ void kvm_arch_vcpu_destroy(struct kvm_vcpu *vcpu)
 static void kvm_free_vcpus(struct kvm *kvm)
 {
 	unsigned int i;
+	struct kvm_vcpu *vcpu;
 
-	for (i = 0; i < KVM_MAX_VCPUS; ++i) {
-		if (kvm->vcpus[i]) {
-			kvm_arch_vcpu_destroy(kvm->vcpus[i]);
-			kvm->vcpus[i] = NULL;
-		}
-	}
+	kvm_for_each_vcpu(i, vcpu, kvm)
+		kvm_arch_vcpu_destroy(vcpu);
+
+	mutex_lock(&kvm->lock);
+	for (i = 0; i < atomic_read(&kvm->online_vcpus); i++)
+		kvm->vcpus[i] = NULL;
+
+	atomic_set(&kvm->online_vcpus, 0);
+	mutex_unlock(&kvm->lock);
 }
 
 void kvm_arch_sync_events(struct kvm *kvm)
@@ -314,8 +318,6 @@ struct kvm_vcpu *kvm_arch_vcpu_create(struct kvm *kvm,
 	BUG_ON(!kvm->arch.sca);
 	if (!kvm->arch.sca->cpu[id].sda)
 		kvm->arch.sca->cpu[id].sda = (__u64) vcpu->arch.sie_block;
-	else
-		BUG_ON(!kvm->vcpus[id]); /* vcpu does already exist */
 	vcpu->arch.sie_block->scaoh = (__u32)(((__u64)kvm->arch.sca) >> 32);
 	vcpu->arch.sie_block->scaol = (__u32)(__u64)kvm->arch.sca;
 
@@ -683,6 +685,7 @@ int kvm_arch_set_memory_region(struct kvm *kvm,
 				int user_alloc)
 {
 	int i;
+	struct kvm_vcpu *vcpu;
 
 	/* A few sanity checks. We can have exactly one memory slot which has
 	   to start at guest virtual zero and which has to be located at a
@@ -707,14 +710,10 @@ int kvm_arch_set_memory_region(struct kvm *kvm,
 		return -EINVAL;
 
 	/* request update of sie control block for all available vcpus */
-	for (i = 0; i < KVM_MAX_VCPUS; ++i) {
-		if (kvm->vcpus[i]) {
-			if (test_and_set_bit(KVM_REQ_MMU_RELOAD,
-						&kvm->vcpus[i]->requests))
-				continue;
-			kvm_s390_inject_sigp_stop(kvm->vcpus[i],
-						  ACTION_RELOADVCPU_ON_STOP);
-		}
+	kvm_for_each_vcpu(i, vcpu, kvm) {
+		if (test_and_set_bit(KVM_REQ_MMU_RELOAD, &vcpu->requests))
+			continue;
+		kvm_s390_inject_sigp_stop(vcpu, ACTION_RELOADVCPU_ON_STOP);
 	}
 
 	return 0;
diff --git a/arch/x86/kvm/i8254.c b/arch/x86/kvm/i8254.c
index 06d8f84ae8a..15fc95b2fc0 100644
--- a/arch/x86/kvm/i8254.c
+++ b/arch/x86/kvm/i8254.c
@@ -669,11 +669,8 @@ static void __inject_pit_timer_intr(struct kvm *kvm)
 	 * VCPU0, and only if its LVT0 is in EXTINT mode.
 	 */
 	if (kvm->arch.vapics_in_nmi_mode > 0)
-		for (i = 0; i < KVM_MAX_VCPUS; ++i) {
-			vcpu = kvm->vcpus[i];
-			if (vcpu)
-				kvm_apic_nmi_wd_deliver(vcpu);
-		}
+		kvm_for_each_vcpu(i, vcpu, kvm)
+			kvm_apic_nmi_wd_deliver(vcpu);
 }
 
 void kvm_inject_pit_timer_irqs(struct kvm_vcpu *vcpu)
diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index d443a421ca3..5f97dbd2429 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -1347,10 +1347,10 @@ static void kvm_mmu_put_page(struct kvm_mmu_page *sp, u64 *parent_pte)
 static void kvm_mmu_reset_last_pte_updated(struct kvm *kvm)
 {
 	int i;
+	struct kvm_vcpu *vcpu;
 
-	for (i = 0; i < KVM_MAX_VCPUS; ++i)
-		if (kvm->vcpus[i])
-			kvm->vcpus[i]->arch.last_pte_updated = NULL;
+	kvm_for_each_vcpu(i, vcpu, kvm)
+		vcpu->arch.last_pte_updated = NULL;
 }
 
 static void kvm_mmu_unlink_parents(struct kvm *kvm, struct kvm_mmu_page *sp)
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index d8adc1da76d..89862a80e32 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -2946,10 +2946,7 @@ static int kvmclock_cpufreq_notifier(struct notifier_block *nb, unsigned long va
 
 	spin_lock(&kvm_lock);
 	list_for_each_entry(kvm, &vm_list, vm_list) {
-		for (i = 0; i < KVM_MAX_VCPUS; ++i) {
-			vcpu = kvm->vcpus[i];
-			if (!vcpu)
-				continue;
+		kvm_for_each_vcpu(i, vcpu, kvm) {
 			if (vcpu->cpu != freq->cpu)
 				continue;
 			if (!kvm_request_guest_time_update(vcpu))
@@ -4678,20 +4675,22 @@ static void kvm_unload_vcpu_mmu(struct kvm_vcpu *vcpu)
 static void kvm_free_vcpus(struct kvm *kvm)
 {
 	unsigned int i;
+	struct kvm_vcpu *vcpu;
 
 	/*
 	 * Unpin any mmu pages first.
 	 */
-	for (i = 0; i < KVM_MAX_VCPUS; ++i)
-		if (kvm->vcpus[i])
-			kvm_unload_vcpu_mmu(kvm->vcpus[i]);
-	for (i = 0; i < KVM_MAX_VCPUS; ++i) {
-		if (kvm->vcpus[i]) {
-			kvm_arch_vcpu_free(kvm->vcpus[i]);
-			kvm->vcpus[i] = NULL;
-		}
-	}
+	kvm_for_each_vcpu(i, vcpu, kvm)
+		kvm_unload_vcpu_mmu(vcpu);
+	kvm_for_each_vcpu(i, vcpu, kvm)
+		kvm_arch_vcpu_free(vcpu);
+
+	mutex_lock(&kvm->lock);
+	for (i = 0; i < atomic_read(&kvm->online_vcpus); i++)
+		kvm->vcpus[i] = NULL;
 
+	atomic_set(&kvm->online_vcpus, 0);
+	mutex_unlock(&kvm->lock);
 }
 
 void kvm_arch_sync_events(struct kvm *kvm)
-- 
cgit v1.2.3


From 3f5d18a96577fd78277e08c467041573b9a65eaf Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Thu, 11 Jun 2009 15:43:28 +0300
Subject: KVM: Return to userspace on emulation failure

Instead of mindlessly retrying to execute the instruction, report the
failure to userspace.

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/mmu.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 5f97dbd2429..b6e4cda7704 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -2673,8 +2673,9 @@ int kvm_mmu_page_fault(struct kvm_vcpu *vcpu, gva_t cr2, u32 error_code)
 		++vcpu->stat.mmio_exits;
 		return 0;
 	case EMULATE_FAIL:
-		kvm_report_emulation_failure(vcpu, "pagetable");
-		return 1;
+		vcpu->run->exit_reason = KVM_EXIT_INTERNAL_ERROR;
+		vcpu->run->internal.suberror = KVM_INTERNAL_ERROR_EMULATION;
+		return 0;
 	default:
 		BUG();
 	}
-- 
cgit v1.2.3


From 776e6633363b5616be6fa4493a8b70ef8e2ea04b Mon Sep 17 00:00:00 2001
From: Marcelo Tosatti <mtosatti@redhat.com>
Date: Wed, 10 Jun 2009 12:27:03 -0300
Subject: KVM: MMU: introduce is_last_spte helper

Hiding some of the last largepage / level interaction (which is useful
for gbpages and for zero based levels).

Also merge the PT_PAGE_TABLE_LEVEL clearing loop in unlink_children.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/mmu.c | 26 +++++++++++++-------------
 1 file changed, 13 insertions(+), 13 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index b6e4cda7704..f85d9953a62 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -250,6 +250,15 @@ static int is_rmap_spte(u64 pte)
 	return is_shadow_present_pte(pte);
 }
 
+static int is_last_spte(u64 pte, int level)
+{
+	if (level == PT_PAGE_TABLE_LEVEL)
+		return 1;
+	if (level == PT_DIRECTORY_LEVEL && is_large_pte(pte))
+		return 1;
+	return 0;
+}
+
 static pfn_t spte_to_pfn(u64 pte)
 {
 	return (pte & PT64_BASE_ADDR_MASK) >> PAGE_SHIFT;
@@ -1313,25 +1322,17 @@ static void kvm_mmu_page_unlink_children(struct kvm *kvm,
 
 	pt = sp->spt;
 
-	if (sp->role.level == PT_PAGE_TABLE_LEVEL) {
-		for (i = 0; i < PT64_ENT_PER_PAGE; ++i) {
-			if (is_shadow_present_pte(pt[i]))
-				rmap_remove(kvm, &pt[i]);
-			pt[i] = shadow_trap_nonpresent_pte;
-		}
-		return;
-	}
-
 	for (i = 0; i < PT64_ENT_PER_PAGE; ++i) {
 		ent = pt[i];
 
 		if (is_shadow_present_pte(ent)) {
-			if (!is_large_pte(ent)) {
+			if (!is_last_spte(ent, sp->role.level)) {
 				ent &= PT64_BASE_ADDR_MASK;
 				mmu_page_remove_parent_pte(page_header(ent),
 							   &pt[i]);
 			} else {
-				--kvm->stat.lpages;
+				if (is_large_pte(ent))
+					--kvm->stat.lpages;
 				rmap_remove(kvm, &pt[i]);
 			}
 		}
@@ -2381,8 +2382,7 @@ static void mmu_pte_write_zap_pte(struct kvm_vcpu *vcpu,
 
 	pte = *spte;
 	if (is_shadow_present_pte(pte)) {
-		if (sp->role.level == PT_PAGE_TABLE_LEVEL ||
-		    is_large_pte(pte))
+		if (is_last_spte(pte, sp->role.level))
 			rmap_remove(vcpu->kvm, spte);
 		else {
 			child = page_header(pte & PT64_BASE_ADDR_MASK);
-- 
cgit v1.2.3


From 08a3732bf2e68048c9166e929ca2115127a412ab Mon Sep 17 00:00:00 2001
From: Marcelo Tosatti <mtosatti@redhat.com>
Date: Wed, 10 Jun 2009 12:27:04 -0300
Subject: KVM: MMU audit: update count_writable_mappings / count_rmaps

Under testing, count_writable_mappings returns a value that is 2 integers
larger than what count_rmaps returns.

Suspicion is that either of the two functions is counting a duplicate (either
positively or negatively).

Modifying check_writable_mappings_rmap to check for rmap existance on
all present MMU pages fails to trigger an error, which should keep Avi
happy.

Also introduce mmu_spte_walk to invoke a callback on all present sptes visible
to the current vcpu, might be useful in the future.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/mmu.c | 104 +++++++++++++++++++++++++++++++++++++++++++++++------
 1 file changed, 94 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index f85d9953a62..fd5579cc8ab 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -3045,6 +3045,55 @@ static gva_t canonicalize(gva_t gva)
 	return gva;
 }
 
+
+typedef void (*inspect_spte_fn) (struct kvm *kvm, struct kvm_mmu_page *sp,
+				 u64 *sptep);
+
+static void __mmu_spte_walk(struct kvm *kvm, struct kvm_mmu_page *sp,
+			    inspect_spte_fn fn)
+{
+	int i;
+
+	for (i = 0; i < PT64_ENT_PER_PAGE; ++i) {
+		u64 ent = sp->spt[i];
+
+		if (is_shadow_present_pte(ent)) {
+			if (sp->role.level > 1 && !is_large_pte(ent)) {
+				struct kvm_mmu_page *child;
+				child = page_header(ent & PT64_BASE_ADDR_MASK);
+				__mmu_spte_walk(kvm, child, fn);
+			}
+			if (sp->role.level == 1)
+				fn(kvm, sp, &sp->spt[i]);
+		}
+	}
+}
+
+static void mmu_spte_walk(struct kvm_vcpu *vcpu, inspect_spte_fn fn)
+{
+	int i;
+	struct kvm_mmu_page *sp;
+
+	if (!VALID_PAGE(vcpu->arch.mmu.root_hpa))
+		return;
+	if (vcpu->arch.mmu.shadow_root_level == PT64_ROOT_LEVEL) {
+		hpa_t root = vcpu->arch.mmu.root_hpa;
+		sp = page_header(root);
+		__mmu_spte_walk(vcpu->kvm, sp, fn);
+		return;
+	}
+	for (i = 0; i < 4; ++i) {
+		hpa_t root = vcpu->arch.mmu.pae_root[i];
+
+		if (root && VALID_PAGE(root)) {
+			root &= PT64_BASE_ADDR_MASK;
+			sp = page_header(root);
+			__mmu_spte_walk(vcpu->kvm, sp, fn);
+		}
+	}
+	return;
+}
+
 static void audit_mappings_page(struct kvm_vcpu *vcpu, u64 page_pte,
 				gva_t va, int level)
 {
@@ -3137,9 +3186,47 @@ static int count_rmaps(struct kvm_vcpu *vcpu)
 	return nmaps;
 }
 
-static int count_writable_mappings(struct kvm_vcpu *vcpu)
+void inspect_spte_has_rmap(struct kvm *kvm, struct kvm_mmu_page *sp, u64 *sptep)
+{
+	unsigned long *rmapp;
+	struct kvm_mmu_page *rev_sp;
+	gfn_t gfn;
+
+	if (*sptep & PT_WRITABLE_MASK) {
+		rev_sp = page_header(__pa(sptep));
+		gfn = rev_sp->gfns[sptep - rev_sp->spt];
+
+		if (!gfn_to_memslot(kvm, gfn)) {
+			if (!printk_ratelimit())
+				return;
+			printk(KERN_ERR "%s: no memslot for gfn %ld\n",
+					 audit_msg, gfn);
+			printk(KERN_ERR "%s: index %ld of sp (gfn=%lx)\n",
+					audit_msg, sptep - rev_sp->spt,
+					rev_sp->gfn);
+			dump_stack();
+			return;
+		}
+
+		rmapp = gfn_to_rmap(kvm, rev_sp->gfns[sptep - rev_sp->spt], 0);
+		if (!*rmapp) {
+			if (!printk_ratelimit())
+				return;
+			printk(KERN_ERR "%s: no rmap for writable spte %llx\n",
+					 audit_msg, *sptep);
+			dump_stack();
+		}
+	}
+
+}
+
+void audit_writable_sptes_have_rmaps(struct kvm_vcpu *vcpu)
+{
+	mmu_spte_walk(vcpu, inspect_spte_has_rmap);
+}
+
+static void check_writable_mappings_rmap(struct kvm_vcpu *vcpu)
 {
-	int nmaps = 0;
 	struct kvm_mmu_page *sp;
 	int i;
 
@@ -3156,20 +3243,16 @@ static int count_writable_mappings(struct kvm_vcpu *vcpu)
 				continue;
 			if (!(ent & PT_WRITABLE_MASK))
 				continue;
-			++nmaps;
+			inspect_spte_has_rmap(vcpu->kvm, sp, &pt[i]);
 		}
 	}
-	return nmaps;
+	return;
 }
 
 static void audit_rmap(struct kvm_vcpu *vcpu)
 {
-	int n_rmap = count_rmaps(vcpu);
-	int n_actual = count_writable_mappings(vcpu);
-
-	if (n_rmap != n_actual)
-		printk(KERN_ERR "%s: (%s) rmap %d actual %d\n",
-		       __func__, audit_msg, n_rmap, n_actual);
+	check_writable_mappings_rmap(vcpu);
+	count_rmaps(vcpu);
 }
 
 static void audit_write_protection(struct kvm_vcpu *vcpu)
@@ -3203,6 +3286,7 @@ static void kvm_mmu_audit(struct kvm_vcpu *vcpu, const char *msg)
 	audit_rmap(vcpu);
 	audit_write_protection(vcpu);
 	audit_mappings(vcpu);
+	audit_writable_sptes_have_rmaps(vcpu);
 	dbg = olddbg;
 }
 
-- 
cgit v1.2.3


From e58b0f9e0e2c17112e375a3f0ca1ef7e57730f68 Mon Sep 17 00:00:00 2001
From: Marcelo Tosatti <mtosatti@redhat.com>
Date: Wed, 10 Jun 2009 12:27:05 -0300
Subject: KVM: MMU audit: update audit_write_protection

- Unsync pages contain writable sptes in the rmap.
- rmaps do not exclusively contain writable sptes anymore.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/mmu.c | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index fd5579cc8ab..4c2585cab18 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -3260,20 +3260,28 @@ static void audit_write_protection(struct kvm_vcpu *vcpu)
 	struct kvm_mmu_page *sp;
 	struct kvm_memory_slot *slot;
 	unsigned long *rmapp;
+	u64 *spte;
 	gfn_t gfn;
 
 	list_for_each_entry(sp, &vcpu->kvm->arch.active_mmu_pages, link) {
 		if (sp->role.direct)
 			continue;
+		if (sp->unsync)
+			continue;
 
 		gfn = unalias_gfn(vcpu->kvm, sp->gfn);
 		slot = gfn_to_memslot_unaliased(vcpu->kvm, sp->gfn);
 		rmapp = &slot->rmap[gfn - slot->base_gfn];
-		if (*rmapp)
-			printk(KERN_ERR "%s: (%s) shadow page has writable"
-			       " mappings: gfn %lx role %x\n",
+
+		spte = rmap_next(vcpu->kvm, rmapp, NULL);
+		while (spte) {
+			if (*spte & PT_WRITABLE_MASK)
+				printk(KERN_ERR "%s: (%s) shadow page has "
+				"writable mappings: gfn %lx role %x\n",
 			       __func__, audit_msg, sp->gfn,
 			       sp->role.word);
+			spte = rmap_next(vcpu->kvm, rmapp, spte);
+		}
 	}
 }
 
-- 
cgit v1.2.3


From 48fc03174b125238c541cf00acd5e9b9dff6b9ba Mon Sep 17 00:00:00 2001
From: Marcelo Tosatti <mtosatti@redhat.com>
Date: Wed, 10 Jun 2009 12:27:06 -0300
Subject: KVM: MMU audit: nontrapping ptes in nonleaf level

It is valid to set non leaf sptes as notrap.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/mmu.c | 7 +------
 1 file changed, 1 insertion(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 4c2585cab18..86433513fb7 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -3109,12 +3109,7 @@ static void audit_mappings_page(struct kvm_vcpu *vcpu, u64 page_pte,
 
 		va = canonicalize(va);
 		if (level > 1) {
-			if (ent == shadow_notrap_nonpresent_pte)
-				printk(KERN_ERR "audit: (%s) nontrapping pte"
-				       " in nonleaf level: levels %d gva %lx"
-				       " level %d pte %llx\n", audit_msg,
-				       vcpu->arch.mmu.root_level, va, level, ent);
-			else
+			if (is_shadow_present_pte(ent))
 				audit_mappings_page(vcpu, ent, va, level - 1);
 		} else {
 			gpa_t gpa = vcpu->arch.mmu.gva_to_gpa(vcpu, va);
-- 
cgit v1.2.3


From 2aaf65e8c40468b198b709a765abe311f91c1a1d Mon Sep 17 00:00:00 2001
From: Marcelo Tosatti <mtosatti@redhat.com>
Date: Wed, 10 Jun 2009 12:27:07 -0300
Subject: KVM: MMU audit: audit_mappings tweaks

- Fail early in case gfn_to_pfn returns is_error_pfn.
- For the pre pte write case, avoid spurious "gva is valid but spte is notrap"
  messages (the emulation code does the guest write first, so this particular
  case is OK).

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/mmu.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 86433513fb7..50fe8541ed3 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -3117,6 +3117,11 @@ static void audit_mappings_page(struct kvm_vcpu *vcpu, u64 page_pte,
 			pfn_t pfn = gfn_to_pfn(vcpu->kvm, gfn);
 			hpa_t hpa = (hpa_t)pfn << PAGE_SHIFT;
 
+			if (is_error_pfn(pfn)) {
+				kvm_release_pfn_clean(pfn);
+				continue;
+			}
+
 			if (is_shadow_present_pte(ent)
 			    && (ent & PT64_BASE_ADDR_MASK) != hpa)
 				printk(KERN_ERR "xx audit error: (%s) levels %d"
@@ -3288,7 +3293,8 @@ static void kvm_mmu_audit(struct kvm_vcpu *vcpu, const char *msg)
 	audit_msg = msg;
 	audit_rmap(vcpu);
 	audit_write_protection(vcpu);
-	audit_mappings(vcpu);
+	if (strcmp("pre pte write", audit_msg) != 0)
+		audit_mappings(vcpu);
 	audit_writable_sptes_have_rmaps(vcpu);
 	dbg = olddbg;
 }
-- 
cgit v1.2.3


From 2920d7285740582d6101f32c37d8d54f82531e1e Mon Sep 17 00:00:00 2001
From: Marcelo Tosatti <mtosatti@redhat.com>
Date: Wed, 10 Jun 2009 12:27:08 -0300
Subject: KVM: MMU audit: largepage handling

Make the audit code aware of largepages.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/mmu.c | 15 +++++++--------
 1 file changed, 7 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 50fe8541ed3..780ce3fe791 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -3058,12 +3058,11 @@ static void __mmu_spte_walk(struct kvm *kvm, struct kvm_mmu_page *sp,
 		u64 ent = sp->spt[i];
 
 		if (is_shadow_present_pte(ent)) {
-			if (sp->role.level > 1 && !is_large_pte(ent)) {
+			if (!is_last_spte(ent, sp->role.level)) {
 				struct kvm_mmu_page *child;
 				child = page_header(ent & PT64_BASE_ADDR_MASK);
 				__mmu_spte_walk(kvm, child, fn);
-			}
-			if (sp->role.level == 1)
+			} else
 				fn(kvm, sp, &sp->spt[i]);
 		}
 	}
@@ -3108,10 +3107,9 @@ static void audit_mappings_page(struct kvm_vcpu *vcpu, u64 page_pte,
 			continue;
 
 		va = canonicalize(va);
-		if (level > 1) {
-			if (is_shadow_present_pte(ent))
-				audit_mappings_page(vcpu, ent, va, level - 1);
-		} else {
+		if (is_shadow_present_pte(ent) && !is_last_spte(ent, level))
+			audit_mappings_page(vcpu, ent, va, level - 1);
+		else {
 			gpa_t gpa = vcpu->arch.mmu.gva_to_gpa(vcpu, va);
 			gfn_t gfn = gpa >> PAGE_SHIFT;
 			pfn_t pfn = gfn_to_pfn(vcpu->kvm, gfn);
@@ -3208,7 +3206,8 @@ void inspect_spte_has_rmap(struct kvm *kvm, struct kvm_mmu_page *sp, u64 *sptep)
 			return;
 		}
 
-		rmapp = gfn_to_rmap(kvm, rev_sp->gfns[sptep - rev_sp->spt], 0);
+		rmapp = gfn_to_rmap(kvm, rev_sp->gfns[sptep - rev_sp->spt],
+				    is_large_pte(*sptep));
 		if (!*rmapp) {
 			if (!printk_ratelimit())
 				return;
-- 
cgit v1.2.3


From 71db602322b1197e7951655c46339324b6208bf9 Mon Sep 17 00:00:00 2001
From: Andre Przywara <andre.przywara@amd.com>
Date: Fri, 12 Jun 2009 22:01:29 +0200
Subject: KVM: Move performance counter MSR access interception to generic x86
 path

The performance counter MSRs are different for AMD and Intel CPUs and they
are chosen mainly by the CPUID vendor string. This patch catches writes to
all addresses (regardless of VMX/SVM path) and handles them in the generic
MSR handler routine. Writing a 0 into the event select register is something
we perfectly emulate ;-), so don't print out a warning to dmesg in this
case.
This fixes booting a 64bit Windows guest with an AMD CPUID on an Intel host.

Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/svm.c | 16 ----------------
 arch/x86/kvm/vmx.c | 12 ------------
 arch/x86/kvm/x86.c | 30 ++++++++++++++++++++++++++++++
 3 files changed, 30 insertions(+), 28 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 28b981409a8..060aa9f5571 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -2142,22 +2142,6 @@ static int svm_set_msr(struct kvm_vcpu *vcpu, unsigned ecx, u64 data)
 		else
 			svm_disable_lbrv(svm);
 		break;
-	case MSR_K7_EVNTSEL0:
-	case MSR_K7_EVNTSEL1:
-	case MSR_K7_EVNTSEL2:
-	case MSR_K7_EVNTSEL3:
-	case MSR_K7_PERFCTR0:
-	case MSR_K7_PERFCTR1:
-	case MSR_K7_PERFCTR2:
-	case MSR_K7_PERFCTR3:
-		/*
-		 * Just discard all writes to the performance counters; this
-		 * should keep both older linux and windows 64-bit guests
-		 * happy
-		 */
-		pr_unimpl(vcpu, "unimplemented perfctr wrmsr: 0x%x data 0x%llx\n", ecx, data);
-
-		break;
 	case MSR_VM_HSAVE_PA:
 		svm->hsave_msr = data;
 		break;
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index c08bb4cf372..6ee929255a3 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -1024,18 +1024,6 @@ static int vmx_set_msr(struct kvm_vcpu *vcpu, u32 msr_index, u64 data)
 	case MSR_IA32_TSC:
 		rdtscll(host_tsc);
 		guest_write_tsc(data, host_tsc);
-		break;
-	case MSR_P6_PERFCTR0:
-	case MSR_P6_PERFCTR1:
-	case MSR_P6_EVNTSEL0:
-	case MSR_P6_EVNTSEL1:
-		/*
-		 * Just discard all writes to the performance counters; this
-		 * should keep both older linux and windows 64-bit guests
-		 * happy
-		 */
-		pr_unimpl(vcpu, "unimplemented perfctr wrmsr: 0x%x data 0x%llx\n", msr_index, data);
-
 		break;
 	case MSR_IA32_CR_PAT:
 		if (vmcs_config.vmentry_ctrl & VM_ENTRY_LOAD_IA32_PAT) {
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 89862a80e32..30492f0ba4e 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -886,6 +886,36 @@ int kvm_set_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 data)
 	case MSR_IA32_MCG_STATUS:
 	case MSR_IA32_MC0_CTL ... MSR_IA32_MC0_CTL + 4 * KVM_MAX_MCE_BANKS - 1:
 		return set_msr_mce(vcpu, msr, data);
+
+	/* Performance counters are not protected by a CPUID bit,
+	 * so we should check all of them in the generic path for the sake of
+	 * cross vendor migration.
+	 * Writing a zero into the event select MSRs disables them,
+	 * which we perfectly emulate ;-). Any other value should be at least
+	 * reported, some guests depend on them.
+	 */
+	case MSR_P6_EVNTSEL0:
+	case MSR_P6_EVNTSEL1:
+	case MSR_K7_EVNTSEL0:
+	case MSR_K7_EVNTSEL1:
+	case MSR_K7_EVNTSEL2:
+	case MSR_K7_EVNTSEL3:
+		if (data != 0)
+			pr_unimpl(vcpu, "unimplemented perfctr wrmsr: "
+				"0x%x data 0x%llx\n", msr, data);
+		break;
+	/* at least RHEL 4 unconditionally writes to the perfctr registers,
+	 * so we ignore writes to make it happy.
+	 */
+	case MSR_P6_PERFCTR0:
+	case MSR_P6_PERFCTR1:
+	case MSR_K7_PERFCTR0:
+	case MSR_K7_PERFCTR1:
+	case MSR_K7_PERFCTR2:
+	case MSR_K7_PERFCTR3:
+		pr_unimpl(vcpu, "unimplemented perfctr wrmsr: "
+			"0x%x data 0x%llx\n", msr, data);
+		break;
 	default:
 		pr_unimpl(vcpu, "unhandled wrmsr: 0x%x data %llx\n", msr, data);
 		return 1;
-- 
cgit v1.2.3


From e799794e02a368f79c3fae26aabaaadd0b7466ce Mon Sep 17 00:00:00 2001
From: Marcelo Tosatti <mtosatti@redhat.com>
Date: Thu, 11 Jun 2009 12:07:40 -0300
Subject: KVM: VMX: more MSR_IA32_VMX_EPT_VPID_CAP capability bits

Required for EPT misconfiguration handler.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/include/asm/vmx.h |  7 +++++++
 arch/x86/kvm/vmx.c         | 20 ++++++++++++++++++++
 2 files changed, 27 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/include/asm/vmx.h b/arch/x86/include/asm/vmx.h
index e7927a639d6..272514c2d45 100644
--- a/arch/x86/include/asm/vmx.h
+++ b/arch/x86/include/asm/vmx.h
@@ -352,9 +352,16 @@ enum vmcs_field {
 #define VMX_EPT_EXTENT_INDIVIDUAL_ADDR		0
 #define VMX_EPT_EXTENT_CONTEXT			1
 #define VMX_EPT_EXTENT_GLOBAL			2
+
+#define VMX_EPT_EXECUTE_ONLY_BIT		(1ull)
+#define VMX_EPT_PAGE_WALK_4_BIT			(1ull << 6)
+#define VMX_EPTP_UC_BIT				(1ull << 8)
+#define VMX_EPTP_WB_BIT				(1ull << 14)
+#define VMX_EPT_2MB_PAGE_BIT			(1ull << 16)
 #define VMX_EPT_EXTENT_INDIVIDUAL_BIT		(1ull << 24)
 #define VMX_EPT_EXTENT_CONTEXT_BIT		(1ull << 25)
 #define VMX_EPT_EXTENT_GLOBAL_BIT		(1ull << 26)
+
 #define VMX_EPT_DEFAULT_GAW			3
 #define VMX_EPT_MAX_GAW				0x4
 #define VMX_EPT_MT_EPTE_SHIFT			3
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 6ee929255a3..6610181267b 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -270,6 +270,26 @@ static inline bool cpu_has_vmx_flexpriority(void)
 		cpu_has_vmx_virtualize_apic_accesses();
 }
 
+static inline bool cpu_has_vmx_ept_execute_only(void)
+{
+	return !!(vmx_capability.ept & VMX_EPT_EXECUTE_ONLY_BIT);
+}
+
+static inline bool cpu_has_vmx_eptp_uncacheable(void)
+{
+	return !!(vmx_capability.ept & VMX_EPTP_UC_BIT);
+}
+
+static inline bool cpu_has_vmx_eptp_writeback(void)
+{
+	return !!(vmx_capability.ept & VMX_EPTP_WB_BIT);
+}
+
+static inline bool cpu_has_vmx_ept_2m_page(void)
+{
+	return !!(vmx_capability.ept & VMX_EPT_2MB_PAGE_BIT);
+}
+
 static inline int cpu_has_vmx_invept_individual_addr(void)
 {
 	return !!(vmx_capability.ept & VMX_EPT_EXTENT_INDIVIDUAL_BIT);
-- 
cgit v1.2.3


From 4d88954d6246d7d43bb8903981731002179f1a1c Mon Sep 17 00:00:00 2001
From: Marcelo Tosatti <mtosatti@redhat.com>
Date: Thu, 11 Jun 2009 12:07:41 -0300
Subject: KVM: MMU: make for_each_shadow_entry aware of largepages

This way there is no need to add explicit checks in every
for_each_shadow_entry user.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/mmu.c | 5 +++++
 1 file changed, 5 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 780ce3fe791..e18f65bf2de 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -1302,6 +1302,11 @@ static bool shadow_walk_okay(struct kvm_shadow_walk_iterator *iterator)
 {
 	if (iterator->level < PT_PAGE_TABLE_LEVEL)
 		return false;
+
+	if (iterator->level == PT_PAGE_TABLE_LEVEL)
+		if (is_large_pte(*iterator->sptep))
+			return false;
+
 	iterator->index = SHADOW_PT_INDEX(iterator->addr, iterator->level);
 	iterator->sptep	= ((u64 *)__va(iterator->shadow_addr)) + iterator->index;
 	return true;
-- 
cgit v1.2.3


From 94d8b056a20bac4f9905d6dafcf7b7005207684a Mon Sep 17 00:00:00 2001
From: Marcelo Tosatti <mtosatti@redhat.com>
Date: Thu, 11 Jun 2009 12:07:42 -0300
Subject: KVM: MMU: add kvm_mmu_get_spte_hierarchy helper

Required by EPT misconfiguration handler.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/mmu.c | 18 ++++++++++++++++++
 arch/x86/kvm/mmu.h |  2 ++
 2 files changed, 20 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index e18f65bf2de..12974de88aa 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -3038,6 +3038,24 @@ out:
 	return r;
 }
 
+int kvm_mmu_get_spte_hierarchy(struct kvm_vcpu *vcpu, u64 addr, u64 sptes[4])
+{
+	struct kvm_shadow_walk_iterator iterator;
+	int nr_sptes = 0;
+
+	spin_lock(&vcpu->kvm->mmu_lock);
+	for_each_shadow_entry(vcpu, addr, iterator) {
+		sptes[iterator.level-1] = *iterator.sptep;
+		nr_sptes++;
+		if (!is_shadow_present_pte(*iterator.sptep))
+			break;
+	}
+	spin_unlock(&vcpu->kvm->mmu_lock);
+
+	return nr_sptes;
+}
+EXPORT_SYMBOL_GPL(kvm_mmu_get_spte_hierarchy);
+
 #ifdef AUDIT
 
 static const char *audit_msg;
diff --git a/arch/x86/kvm/mmu.h b/arch/x86/kvm/mmu.h
index 016bf7183e9..61a1b3884b4 100644
--- a/arch/x86/kvm/mmu.h
+++ b/arch/x86/kvm/mmu.h
@@ -37,6 +37,8 @@
 #define PT32_ROOT_LEVEL 2
 #define PT32E_ROOT_LEVEL 3
 
+int kvm_mmu_get_spte_hierarchy(struct kvm_vcpu *vcpu, u64 addr, u64 sptes[4]);
+
 static inline void kvm_mmu_free_some_pages(struct kvm_vcpu *vcpu)
 {
 	if (unlikely(vcpu->kvm->arch.n_free_mmu_pages < KVM_MIN_FREE_MMU_PAGES))
-- 
cgit v1.2.3


From 68f89400bc92421d6da22e1ec8e3ec599c3c8244 Mon Sep 17 00:00:00 2001
From: Marcelo Tosatti <mtosatti@redhat.com>
Date: Thu, 11 Jun 2009 12:07:43 -0300
Subject: KVM: VMX: EPT misconfiguration handler

Handler for EPT misconfiguration which checks for valid state
in the shadow pagetables, printing the spte on each level.

The separate WARN_ONs are useful for kerneloops.org.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/vmx.c | 86 +++++++++++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 85 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 6610181267b..94c07ada103 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -3227,6 +3227,89 @@ static int handle_ept_violation(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	return kvm_mmu_page_fault(vcpu, gpa & PAGE_MASK, 0);
 }
 
+static u64 ept_rsvd_mask(u64 spte, int level)
+{
+	int i;
+	u64 mask = 0;
+
+	for (i = 51; i > boot_cpu_data.x86_phys_bits; i--)
+		mask |= (1ULL << i);
+
+	if (level > 2)
+		/* bits 7:3 reserved */
+		mask |= 0xf8;
+	else if (level == 2) {
+		if (spte & (1ULL << 7))
+			/* 2MB ref, bits 20:12 reserved */
+			mask |= 0x1ff000;
+		else
+			/* bits 6:3 reserved */
+			mask |= 0x78;
+	}
+
+	return mask;
+}
+
+static void ept_misconfig_inspect_spte(struct kvm_vcpu *vcpu, u64 spte,
+				       int level)
+{
+	printk(KERN_ERR "%s: spte 0x%llx level %d\n", __func__, spte, level);
+
+	/* 010b (write-only) */
+	WARN_ON((spte & 0x7) == 0x2);
+
+	/* 110b (write/execute) */
+	WARN_ON((spte & 0x7) == 0x6);
+
+	/* 100b (execute-only) and value not supported by logical processor */
+	if (!cpu_has_vmx_ept_execute_only())
+		WARN_ON((spte & 0x7) == 0x4);
+
+	/* not 000b */
+	if ((spte & 0x7)) {
+		u64 rsvd_bits = spte & ept_rsvd_mask(spte, level);
+
+		if (rsvd_bits != 0) {
+			printk(KERN_ERR "%s: rsvd_bits = 0x%llx\n",
+					 __func__, rsvd_bits);
+			WARN_ON(1);
+		}
+
+		if (level == 1 || (level == 2 && (spte & (1ULL << 7)))) {
+			u64 ept_mem_type = (spte & 0x38) >> 3;
+
+			if (ept_mem_type == 2 || ept_mem_type == 3 ||
+			    ept_mem_type == 7) {
+				printk(KERN_ERR "%s: ept_mem_type=0x%llx\n",
+						__func__, ept_mem_type);
+				WARN_ON(1);
+			}
+		}
+	}
+}
+
+static int handle_ept_misconfig(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+{
+	u64 sptes[4];
+	int nr_sptes, i;
+	gpa_t gpa;
+
+	gpa = vmcs_read64(GUEST_PHYSICAL_ADDRESS);
+
+	printk(KERN_ERR "EPT: Misconfiguration.\n");
+	printk(KERN_ERR "EPT: GPA: 0x%llx\n", gpa);
+
+	nr_sptes = kvm_mmu_get_spte_hierarchy(vcpu, gpa, sptes);
+
+	for (i = PT64_ROOT_LEVEL; i > PT64_ROOT_LEVEL - nr_sptes; --i)
+		ept_misconfig_inspect_spte(vcpu, sptes[i-1], i);
+
+	kvm_run->exit_reason = KVM_EXIT_UNKNOWN;
+	kvm_run->hw.hardware_exit_reason = EXIT_REASON_EPT_MISCONFIG;
+
+	return 0;
+}
+
 static int handle_nmi_window(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 {
 	u32 cpu_based_vm_exec_control;
@@ -3306,8 +3389,9 @@ static int (*kvm_vmx_exit_handlers[])(struct kvm_vcpu *vcpu,
 	[EXIT_REASON_APIC_ACCESS]             = handle_apic_access,
 	[EXIT_REASON_WBINVD]                  = handle_wbinvd,
 	[EXIT_REASON_TASK_SWITCH]             = handle_task_switch,
-	[EXIT_REASON_EPT_VIOLATION]	      = handle_ept_violation,
 	[EXIT_REASON_MCE_DURING_VMENTRY]      = handle_machine_check,
+	[EXIT_REASON_EPT_VIOLATION]	      = handle_ept_violation,
+	[EXIT_REASON_EPT_MISCONFIG]           = handle_ept_misconfig,
 };
 
 static const int kvm_vmx_max_exit_handlers =
-- 
cgit v1.2.3


From 54dee9933e8d93589ad63ec3d6be39f1921b0767 Mon Sep 17 00:00:00 2001
From: Marcelo Tosatti <mtosatti@redhat.com>
Date: Thu, 11 Jun 2009 12:07:44 -0300
Subject: KVM: VMX: conditionally disable 2M pages

Disable usage of 2M pages if VMX_EPT_2MB_PAGE_BIT (bit 16) is clear
in MSR_IA32_VMX_EPT_VPID_CAP and EPT is enabled.

[avi: s/largepages_disabled/largepages_enabled/ to avoid negative logic]

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/vmx.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 94c07ada103..fc8d49c6bc5 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -1381,6 +1381,9 @@ static __init int hardware_setup(void)
 	if (!cpu_has_vmx_tpr_shadow())
 		kvm_x86_ops->update_cr8_intercept = NULL;
 
+	if (enable_ept && !cpu_has_vmx_ept_2m_page())
+		kvm_disable_largepages();
+
 	return alloc_kvm_area();
 }
 
-- 
cgit v1.2.3


From 6edf14d8d0df144d6928799040f46fa37b5460ae Mon Sep 17 00:00:00 2001
From: Gleb Natapov <gleb@redhat.com>
Date: Thu, 11 Jun 2009 11:26:11 +0300
Subject: KVM: Replace pending exception by PF if it happens serially

Replace previous exception with a new one in a hope that instruction
re-execution will regenerate lost exception.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/x86.c | 20 +++++++++++++-------
 1 file changed, 13 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 30492f0ba4e..a066876f137 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -181,16 +181,22 @@ void kvm_inject_page_fault(struct kvm_vcpu *vcpu, unsigned long addr,
 	++vcpu->stat.pf_guest;
 
 	if (vcpu->arch.exception.pending) {
-		if (vcpu->arch.exception.nr == PF_VECTOR) {
-			printk(KERN_DEBUG "kvm: inject_page_fault:"
-					" double fault 0x%lx\n", addr);
-			vcpu->arch.exception.nr = DF_VECTOR;
-			vcpu->arch.exception.error_code = 0;
-		} else if (vcpu->arch.exception.nr == DF_VECTOR) {
+		switch(vcpu->arch.exception.nr) {
+		case DF_VECTOR:
 			/* triple fault -> shutdown */
 			set_bit(KVM_REQ_TRIPLE_FAULT, &vcpu->requests);
+			return;
+		case PF_VECTOR:
+			vcpu->arch.exception.nr = DF_VECTOR;
+			vcpu->arch.exception.error_code = 0;
+			return;
+		default:
+			/* replace previous exception with a new one in a hope
+			   that instruction re-execution will regenerate lost
+			   exception */
+			vcpu->arch.exception.pending = false;
+			break;
 		}
-		return;
 	}
 	vcpu->arch.cr2 = addr;
 	kvm_queue_exception_e(vcpu, PF_VECTOR, error_code);
-- 
cgit v1.2.3


From 33e4c68656a2e461b296ce714ec322978de85412 Mon Sep 17 00:00:00 2001
From: Gleb Natapov <gleb@redhat.com>
Date: Thu, 11 Jun 2009 11:06:51 +0300
Subject: KVM: Optimize searching for highest IRR

Most of the time IRR is empty, so instead of scanning the whole IRR on
each VM entry keep a variable that tells us if IRR is not empty. IRR
will have to be scanned twice on each IRQ delivery, but this is much
more rare than VM entry.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/lapic.c | 24 +++++++++++++++++++++---
 arch/x86/kvm/lapic.h |  1 +
 2 files changed, 22 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index b1694dc4572..3bde43c3789 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -165,29 +165,46 @@ static int find_highest_vector(void *bitmap)
 
 static inline int apic_test_and_set_irr(int vec, struct kvm_lapic *apic)
 {
+	apic->irr_pending = true;
 	return apic_test_and_set_vector(vec, apic->regs + APIC_IRR);
 }
 
-static inline void apic_clear_irr(int vec, struct kvm_lapic *apic)
+static inline int apic_search_irr(struct kvm_lapic *apic)
 {
-	apic_clear_vector(vec, apic->regs + APIC_IRR);
+	return find_highest_vector(apic->regs + APIC_IRR);
 }
 
 static inline int apic_find_highest_irr(struct kvm_lapic *apic)
 {
 	int result;
 
-	result = find_highest_vector(apic->regs + APIC_IRR);
+	if (!apic->irr_pending)
+		return -1;
+
+	result = apic_search_irr(apic);
 	ASSERT(result == -1 || result >= 16);
 
 	return result;
 }
 
+static inline void apic_clear_irr(int vec, struct kvm_lapic *apic)
+{
+	apic->irr_pending = false;
+	apic_clear_vector(vec, apic->regs + APIC_IRR);
+	if (apic_search_irr(apic) != -1)
+		apic->irr_pending = true;
+}
+
 int kvm_lapic_find_highest_irr(struct kvm_vcpu *vcpu)
 {
 	struct kvm_lapic *apic = vcpu->arch.apic;
 	int highest_irr;
 
+	/* This may race with setting of irr in __apic_accept_irq() and
+	 * value returned may be wrong, but kvm_vcpu_kick() in __apic_accept_irq
+	 * will cause vmexit immediately and the value will be recalculated
+	 * on the next vmentry.
+	 */
 	if (!apic)
 		return 0;
 	highest_irr = apic_find_highest_irr(apic);
@@ -843,6 +860,7 @@ void kvm_lapic_reset(struct kvm_vcpu *vcpu)
 		apic_set_reg(apic, APIC_ISR + 0x10 * i, 0);
 		apic_set_reg(apic, APIC_TMR + 0x10 * i, 0);
 	}
+	apic->irr_pending = false;
 	update_divide_count(apic);
 	atomic_set(&apic->lapic_timer.pending, 0);
 	if (kvm_vcpu_is_bsp(vcpu))
diff --git a/arch/x86/kvm/lapic.h b/arch/x86/kvm/lapic.h
index a587f8349c4..3f3ecc6edbf 100644
--- a/arch/x86/kvm/lapic.h
+++ b/arch/x86/kvm/lapic.h
@@ -12,6 +12,7 @@ struct kvm_lapic {
 	struct kvm_timer lapic_timer;
 	u32 divide_count;
 	struct kvm_vcpu *vcpu;
+	bool irr_pending;
 	struct page *regs_page;
 	void *regs;
 	gpa_t vapic_addr;
-- 
cgit v1.2.3


From f7104db26ab2bc5f642892774ac8fb0f15400969 Mon Sep 17 00:00:00 2001
From: Jan Kiszka <jan.kiszka@siemens.com>
Date: Tue, 9 Jun 2009 15:37:01 +0200
Subject: KVM: Fix racy event propagation in timer

Minor issue that likely had no practical relevance: the kvm timer
function so far incremented the pending counter and then may reset it
again to 1 in case reinjection was disabled. This opened a small racy
window with the corresponding VCPU loop that may have happened to run
on another (real) CPU and already consumed the value.

Fix it by skipping the incrementation in case pending is already > 0.
This opens a different race windows, but may only rarely cause lost
events in case we do not care about them anyway (!reinject).

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/timer.c | 16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/timer.c b/arch/x86/kvm/timer.c
index 85cc743a820..1baed414b57 100644
--- a/arch/x86/kvm/timer.c
+++ b/arch/x86/kvm/timer.c
@@ -9,12 +9,16 @@ static int __kvm_timer_fn(struct kvm_vcpu *vcpu, struct kvm_timer *ktimer)
 	int restart_timer = 0;
 	wait_queue_head_t *q = &vcpu->wq;
 
-	/* FIXME: this code should not know anything about vcpus */
-	if (!atomic_inc_and_test(&ktimer->pending))
-		set_bit(KVM_REQ_PENDING_TIMER, &vcpu->requests);
-
-	if (!ktimer->reinject)
-		atomic_set(&ktimer->pending, 1);
+	/*
+	 * There is a race window between reading and incrementing, but we do
+	 * not care about potentially loosing timer events in the !reinject
+	 * case anyway.
+	 */
+	if (ktimer->reinject || !atomic_read(&ktimer->pending)) {
+		/* FIXME: this code should not know anything about vcpus */
+		if (!atomic_inc_and_test(&ktimer->pending))
+			set_bit(KVM_REQ_PENDING_TIMER, &vcpu->requests);
+	}
 
 	if (waitqueue_active(q))
 		wake_up_interruptible(q);
-- 
cgit v1.2.3


From 681405bfc73a2717ae9b03b2bad465b009106f31 Mon Sep 17 00:00:00 2001
From: Jan Kiszka <jan.kiszka@siemens.com>
Date: Tue, 9 Jun 2009 15:37:03 +0200
Subject: KVM: Drop useless atomic test from timer function

The current code tries to optimize the setting of
KVM_REQ_PENDING_TIMER but used atomic_inc_and_test - which always
returns true unless pending had the invalid value of -1 on entry. This
patch drops the test part preserving the original semantic but
expressing it less confusingly.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/timer.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/timer.c b/arch/x86/kvm/timer.c
index 1baed414b57..eea40439066 100644
--- a/arch/x86/kvm/timer.c
+++ b/arch/x86/kvm/timer.c
@@ -15,9 +15,9 @@ static int __kvm_timer_fn(struct kvm_vcpu *vcpu, struct kvm_timer *ktimer)
 	 * case anyway.
 	 */
 	if (ktimer->reinject || !atomic_read(&ktimer->pending)) {
+		atomic_inc(&ktimer->pending);
 		/* FIXME: this code should not know anything about vcpus */
-		if (!atomic_inc_and_test(&ktimer->pending))
-			set_bit(KVM_REQ_PENDING_TIMER, &vcpu->requests);
+		set_bit(KVM_REQ_PENDING_TIMER, &vcpu->requests);
 	}
 
 	if (waitqueue_active(q))
-- 
cgit v1.2.3


From d3edefc0035669e8817d1d5c32ef03e882477323 Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Tue, 16 Jun 2009 12:33:56 +0300
Subject: KVM: VMX: Only reload guest cr2 if different from host cr2

cr2 changes only rarely, and writing it is expensive.  Avoid the costly cr2
writes by checking if it does not already hold the desired value.

Shaves 70 cycles off the vmexit latency.

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/vmx.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index fc8d49c6bc5..1a84ca191cd 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -3651,11 +3651,16 @@ static void vmx_vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 		"mov %%"R"sp, %c[host_rsp](%0) \n\t"
 		__ex(ASM_VMX_VMWRITE_RSP_RDX) "\n\t"
 		"1: \n\t"
+		/* Reload cr2 if changed */
+		"mov %c[cr2](%0), %%"R"ax \n\t"
+		"mov %%cr2, %%"R"dx \n\t"
+		"cmp %%"R"ax, %%"R"dx \n\t"
+		"je 2f \n\t"
+		"mov %%"R"ax, %%cr2 \n\t"
+		"2: \n\t"
 		/* Check if vmlaunch of vmresume is needed */
 		"cmpl $0, %c[launched](%0) \n\t"
 		/* Load guest registers.  Don't clobber flags. */
-		"mov %c[cr2](%0), %%"R"ax \n\t"
-		"mov %%"R"ax, %%cr2 \n\t"
 		"mov %c[rax](%0), %%"R"ax \n\t"
 		"mov %c[rbx](%0), %%"R"bx \n\t"
 		"mov %c[rdx](%0), %%"R"dx \n\t"
-- 
cgit v1.2.3


From b3dbf89e676e47ef3b10802f9aba5a8e04aba132 Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Tue, 16 Jun 2009 12:36:33 +0300
Subject: KVM: SVM: Don't save/restore host cr2

The host never reads cr2 in process context, so are free to clobber it.  The
vmx code does this, so we can safely remove the save/restore code.

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/svm.c | 17 -----------------
 1 file changed, 17 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 060aa9f5571..132be0c7c3e 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -81,7 +81,6 @@ struct vcpu_svm {
 
 	u64 host_user_msrs[NR_HOST_SAVE_USER_MSRS];
 	u64 host_gs_base;
-	unsigned long host_cr2;
 
 	u32 *msrpm;
 	struct vmcb *hsave;
@@ -186,19 +185,6 @@ static inline void invlpga(unsigned long addr, u32 asid)
 	asm volatile (__ex(SVM_INVLPGA) :: "a"(addr), "c"(asid));
 }
 
-static inline unsigned long kvm_read_cr2(void)
-{
-	unsigned long cr2;
-
-	asm volatile ("mov %%cr2, %0" : "=r" (cr2));
-	return cr2;
-}
-
-static inline void kvm_write_cr2(unsigned long val)
-{
-	asm volatile ("mov %0, %%cr2" :: "r" (val));
-}
-
 static inline void force_new_asid(struct kvm_vcpu *vcpu)
 {
 	to_svm(vcpu)->asid_generation--;
@@ -2527,7 +2513,6 @@ static void svm_vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	fs_selector = kvm_read_fs();
 	gs_selector = kvm_read_gs();
 	ldt_selector = kvm_read_ldt();
-	svm->host_cr2 = kvm_read_cr2();
 	if (!is_nested(svm))
 		svm->vmcb->save.cr2 = vcpu->arch.cr2;
 	/* required for live migration with NPT */
@@ -2614,8 +2599,6 @@ static void svm_vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	vcpu->arch.regs[VCPU_REGS_RSP] = svm->vmcb->save.rsp;
 	vcpu->arch.regs[VCPU_REGS_RIP] = svm->vmcb->save.rip;
 
-	kvm_write_cr2(svm->host_cr2);
-
 	kvm_load_fs(fs_selector);
 	kvm_load_gs(gs_selector);
 	kvm_load_ldt(ldt_selector);
-- 
cgit v1.2.3


From 0367b4330e463c45981437083991b90d25a9d78d Mon Sep 17 00:00:00 2001
From: Alexander Graf <agraf@suse.de>
Date: Mon, 15 Jun 2009 15:21:22 +0200
Subject: x86: Add definition for IGNNE MSR

Hyper-V accesses MSR_IGNNE while running under KVM.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/include/asm/msr-index.h | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h
index 6be7fc254b5..bd5549034a9 100644
--- a/arch/x86/include/asm/msr-index.h
+++ b/arch/x86/include/asm/msr-index.h
@@ -374,6 +374,7 @@
 /* AMD-V MSRs */
 
 #define MSR_VM_CR                       0xc0010114
+#define MSR_VM_IGNNE                    0xc0010115
 #define MSR_VM_HSAVE_PA                 0xc0010117
 
 #endif /* _ASM_X86_MSR_INDEX_H */
-- 
cgit v1.2.3


From 3c5d0a44b011e0a1d857452f05c698e1008b4b4a Mon Sep 17 00:00:00 2001
From: Alexander Graf <agraf@suse.de>
Date: Mon, 15 Jun 2009 15:21:23 +0200
Subject: KVM: Implement MSRs used by Hyper-V

Hyper-V uses some MSRs, some of which are actually reserved for BIOS usage.

But let's be nice today and have it its way, because otherwise it fails
terribly.

[jaswinder: fix build for linux-next changes]

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/svm.c | 5 +++++
 1 file changed, 5 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 132be0c7c3e..146c17d406e 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -2131,6 +2131,11 @@ static int svm_set_msr(struct kvm_vcpu *vcpu, unsigned ecx, u64 data)
 	case MSR_VM_HSAVE_PA:
 		svm->hsave_msr = data;
 		break;
+	case MSR_VM_CR:
+	case MSR_VM_IGNNE:
+	case MSR_K7_HWCR:
+		pr_unimpl(vcpu, "unimplemented wrmsr: 0x%x data 0x%llx\n", ecx, data);
+		break;
 	default:
 		return kvm_set_msr_common(vcpu, ecx, data);
 	}
-- 
cgit v1.2.3


From ff092385e8285c03d8b148f42f46f98c5f4becd5 Mon Sep 17 00:00:00 2001
From: Alexander Graf <agraf@suse.de>
Date: Mon, 15 Jun 2009 15:21:24 +0200
Subject: KVM: SVM: Implement INVLPGA

SVM adds another way to do INVLPG by ASID which Hyper-V makes use of,
so let's implement it!

For now we just do the same thing invlpg does, as asid switching
means we flush the mmu anyways. That might change one day though.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/svm.c | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 146c17d406e..be699795d70 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -1880,6 +1880,19 @@ static int clgi_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 	return 1;
 }
 
+static int invlpga_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
+{
+	struct kvm_vcpu *vcpu = &svm->vcpu;
+	nsvm_printk("INVLPGA\n");
+
+	/* Let's treat INVLPGA the same as INVLPG (can be optimized!) */
+	kvm_mmu_invlpg(vcpu, vcpu->arch.regs[VCPU_REGS_RAX]);
+
+	svm->next_rip = kvm_rip_read(&svm->vcpu) + 3;
+	skip_emulated_instruction(&svm->vcpu);
+	return 1;
+}
+
 static int invalid_op_interception(struct vcpu_svm *svm,
 				   struct kvm_run *kvm_run)
 {
@@ -2227,7 +2240,7 @@ static int (*svm_exit_handlers[])(struct vcpu_svm *svm,
 	[SVM_EXIT_INVD]                         = emulate_on_interception,
 	[SVM_EXIT_HLT]				= halt_interception,
 	[SVM_EXIT_INVLPG]			= invlpg_interception,
-	[SVM_EXIT_INVLPGA]			= invalid_op_interception,
+	[SVM_EXIT_INVLPGA]			= invlpga_interception,
 	[SVM_EXIT_IOIO] 		  	= io_interception,
 	[SVM_EXIT_MSR]				= msr_interception,
 	[SVM_EXIT_TASK_SWITCH]			= task_switch_interception,
-- 
cgit v1.2.3


From 219b65dcf6c0bad83d51bfa12e25891c02de2414 Mon Sep 17 00:00:00 2001
From: Alexander Graf <agraf@suse.de>
Date: Mon, 15 Jun 2009 15:21:25 +0200
Subject: KVM: SVM: Improve nested interrupt injection

While trying to get Hyper-V running, I realized that the interrupt injection
mechanisms that are in place right now are not 100% correct.

This patch makes nested SVM's interrupt injection behave more like on a
real machine.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/svm.c | 39 ++++++++++++++++++++++++---------------
 1 file changed, 24 insertions(+), 15 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index be699795d70..45666618377 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -1612,7 +1612,8 @@ static int nested_svm_vmexit_real(struct vcpu_svm *svm, void *arg1,
 	/* Kill any pending exceptions */
 	if (svm->vcpu.arch.exception.pending == true)
 		nsvm_printk("WARNING: Pending Exception\n");
-	svm->vcpu.arch.exception.pending = false;
+	kvm_clear_exception_queue(&svm->vcpu);
+	kvm_clear_interrupt_queue(&svm->vcpu);
 
 	/* Restore selected save entries */
 	svm->vmcb->save.es = hsave->save.es;
@@ -1680,7 +1681,8 @@ static int nested_svm_vmrun(struct vcpu_svm *svm, void *arg1,
 	svm->nested_vmcb = svm->vmcb->save.rax;
 
 	/* Clear internal status */
-	svm->vcpu.arch.exception.pending = false;
+	kvm_clear_exception_queue(&svm->vcpu);
+	kvm_clear_interrupt_queue(&svm->vcpu);
 
 	/* Save the old vmcb, so we don't need to pick what we save, but
 	   can restore everything when a VMEXIT occurs */
@@ -2362,21 +2364,14 @@ static inline void svm_inject_irq(struct vcpu_svm *svm, int irq)
 		((/*control->int_vector >> 4*/ 0xf) << V_INTR_PRIO_SHIFT);
 }
 
-static void svm_queue_irq(struct kvm_vcpu *vcpu, unsigned nr)
-{
-	struct vcpu_svm *svm = to_svm(vcpu);
-
-	svm->vmcb->control.event_inj = nr |
-		SVM_EVTINJ_VALID | SVM_EVTINJ_TYPE_INTR;
-}
-
 static void svm_set_irq(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_svm *svm = to_svm(vcpu);
 
-	nested_svm_intr(svm);
+	BUG_ON(!(svm->vcpu.arch.hflags & HF_GIF_MASK));
 
-	svm_queue_irq(vcpu, vcpu->arch.interrupt.nr);
+	svm->vmcb->control.event_inj = vcpu->arch.interrupt.nr |
+		SVM_EVTINJ_VALID | SVM_EVTINJ_TYPE_INTR;
 }
 
 static void update_cr8_intercept(struct kvm_vcpu *vcpu, int tpr, int irr)
@@ -2404,13 +2399,25 @@ static int svm_interrupt_allowed(struct kvm_vcpu *vcpu)
 	struct vmcb *vmcb = svm->vmcb;
 	return (vmcb->save.rflags & X86_EFLAGS_IF) &&
 		!(vmcb->control.int_state & SVM_INTERRUPT_SHADOW_MASK) &&
-		(svm->vcpu.arch.hflags & HF_GIF_MASK);
+		(svm->vcpu.arch.hflags & HF_GIF_MASK) &&
+		!is_nested(svm);
 }
 
 static void enable_irq_window(struct kvm_vcpu *vcpu)
 {
-	svm_set_vintr(to_svm(vcpu));
-	svm_inject_irq(to_svm(vcpu), 0x0);
+	struct vcpu_svm *svm = to_svm(vcpu);
+	nsvm_printk("Trying to open IRQ window\n");
+
+	nested_svm_intr(svm);
+
+	/* In case GIF=0 we can't rely on the CPU to tell us when
+	 * GIF becomes 1, because that's a separate STGI/VMRUN intercept.
+	 * The next time we get that intercept, this function will be
+	 * called again though and we'll get the vintr intercept. */
+	if (svm->vcpu.arch.hflags & HF_GIF_MASK) {
+		svm_set_vintr(svm);
+		svm_inject_irq(svm, 0x0);
+	}
 }
 
 static void enable_nmi_window(struct kvm_vcpu *vcpu)
@@ -2489,6 +2496,8 @@ static void svm_complete_interrupts(struct vcpu_svm *svm)
 	case SVM_EXITINTINFO_TYPE_EXEPT:
 		/* In case of software exception do not reinject an exception
 		   vector, but re-execute and instruction instead */
+		if (is_nested(svm))
+			break;
 		if (kvm_exception_is_soft(vector))
 			break;
 		if (exitintinfo & SVM_EXITINTINFO_VALID_ERR) {
-- 
cgit v1.2.3


From 229456fc34b1c9031b04f7581e7b755d1cebfe9c Mon Sep 17 00:00:00 2001
From: Marcelo Tosatti <mtosatti@redhat.com>
Date: Wed, 17 Jun 2009 09:22:14 -0300
Subject: KVM: convert custom marker based tracing to event traces

This allows use of the powerful ftrace infrastructure.

See Documentation/trace/ for usage information.

[avi, stephen: various build fixes]
[sheng: fix control register breakage]

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/include/asm/kvm_host.h |   2 +
 arch/x86/kvm/Makefile           |   4 +
 arch/x86/kvm/lapic.c            |   7 +-
 arch/x86/kvm/svm.c              |  84 +++++++++----
 arch/x86/kvm/trace.h            | 260 ++++++++++++++++++++++++++++++++++++++++
 arch/x86/kvm/vmx.c              |  78 +++++++-----
 arch/x86/kvm/x86.c              |  48 +++-----
 7 files changed, 397 insertions(+), 86 deletions(-)
 create mode 100644 arch/x86/kvm/trace.h

(limited to 'arch')

diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index c7b0cc2b702..19027ab2041 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -14,6 +14,7 @@
 #include <linux/types.h>
 #include <linux/mm.h>
 #include <linux/mmu_notifier.h>
+#include <linux/tracepoint.h>
 
 #include <linux/kvm.h>
 #include <linux/kvm_para.h>
@@ -527,6 +528,7 @@ struct kvm_x86_ops {
 	int (*set_tss_addr)(struct kvm *kvm, unsigned int addr);
 	int (*get_tdp_level)(void);
 	u64 (*get_mt_mask)(struct kvm_vcpu *vcpu, gfn_t gfn, bool is_mmio);
+	const struct trace_print_flags *exit_reasons_str;
 };
 
 extern struct kvm_x86_ops *kvm_x86_ops;
diff --git a/arch/x86/kvm/Makefile b/arch/x86/kvm/Makefile
index 01e3c61f749..7c56850b82c 100644
--- a/arch/x86/kvm/Makefile
+++ b/arch/x86/kvm/Makefile
@@ -1,6 +1,10 @@
 
 EXTRA_CFLAGS += -Ivirt/kvm -Iarch/x86/kvm
 
+CFLAGS_x86.o := -I.
+CFLAGS_svm.o := -I.
+CFLAGS_vmx.o := -I.
+
 kvm-y			+= $(addprefix ../../../virt/kvm/, kvm_main.o ioapic.o \
 				coalesced_mmio.o irq_comm.o eventfd.o)
 kvm-$(CONFIG_KVM_TRACE)	+= $(addprefix ../../../virt/kvm/, kvm_trace.o)
diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index 3bde43c3789..2e028659638 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -34,6 +34,7 @@
 #include <asm/atomic.h>
 #include "kvm_cache_regs.h"
 #include "irq.h"
+#include "trace.h"
 
 #ifndef CONFIG_X86_64
 #define mod_64(x, y) ((x) - (y) * div64_u64(x, y))
@@ -515,8 +516,6 @@ static u32 __apic_read(struct kvm_lapic *apic, unsigned int offset)
 {
 	u32 val = 0;
 
-	KVMTRACE_1D(APIC_ACCESS, apic->vcpu, (u32)offset, handler);
-
 	if (offset >= LAPIC_MMIO_LENGTH)
 		return 0;
 
@@ -562,6 +561,8 @@ static void apic_mmio_read(struct kvm_io_device *this,
 	}
 	result = __apic_read(apic, offset & ~0xf);
 
+	trace_kvm_apic_read(offset, result);
+
 	switch (len) {
 	case 1:
 	case 2:
@@ -657,7 +658,7 @@ static void apic_mmio_write(struct kvm_io_device *this,
 
 	offset &= 0xff0;
 
-	KVMTRACE_1D(APIC_ACCESS, apic->vcpu, (u32)offset, handler);
+	trace_kvm_apic_write(offset, val);
 
 	switch (offset) {
 	case APIC_ID:		/* Local APIC ID */
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 45666618377..b1c44620886 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -25,10 +25,12 @@
 #include <linux/vmalloc.h>
 #include <linux/highmem.h>
 #include <linux/sched.h>
+#include <linux/ftrace_event.h>
 
 #include <asm/desc.h>
 
 #include <asm/virtext.h>
+#include "trace.h"
 
 #define __ex(x) __kvm_handle_fault_on_reboot(x)
 
@@ -1096,7 +1098,6 @@ static unsigned long svm_get_dr(struct kvm_vcpu *vcpu, int dr)
 		val = 0;
 	}
 
-	KVMTRACE_2D(DR_READ, vcpu, (u32)dr, (u32)val, handler);
 	return val;
 }
 
@@ -1105,8 +1106,6 @@ static void svm_set_dr(struct kvm_vcpu *vcpu, int dr, unsigned long value,
 {
 	struct vcpu_svm *svm = to_svm(vcpu);
 
-	KVMTRACE_2D(DR_WRITE, vcpu, (u32)dr, (u32)value, handler);
-
 	*exception = 0;
 
 	switch (dr) {
@@ -1154,14 +1153,7 @@ static int pf_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 	fault_address  = svm->vmcb->control.exit_info_2;
 	error_code = svm->vmcb->control.exit_info_1;
 
-	if (!npt_enabled)
-		KVMTRACE_3D(PAGE_FAULT, &svm->vcpu, error_code,
-			    (u32)fault_address, (u32)(fault_address >> 32),
-			    handler);
-	else
-		KVMTRACE_3D(TDP_FAULT, &svm->vcpu, error_code,
-			    (u32)fault_address, (u32)(fault_address >> 32),
-			    handler);
+	trace_kvm_page_fault(fault_address, error_code);
 	/*
 	 * FIXME: Tis shouldn't be necessary here, but there is a flush
 	 * missing in the MMU code. Until we find this bug, flush the
@@ -1288,14 +1280,12 @@ static int io_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 
 static int nmi_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 {
-	KVMTRACE_0D(NMI, &svm->vcpu, handler);
 	return 1;
 }
 
 static int intr_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 {
 	++svm->vcpu.stat.irq_exits;
-	KVMTRACE_0D(INTR, &svm->vcpu, handler);
 	return 1;
 }
 
@@ -2077,8 +2067,7 @@ static int rdmsr_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 	if (svm_get_msr(&svm->vcpu, ecx, &data))
 		kvm_inject_gp(&svm->vcpu, 0);
 	else {
-		KVMTRACE_3D(MSR_READ, &svm->vcpu, ecx, (u32)data,
-			    (u32)(data >> 32), handler);
+		trace_kvm_msr_read(ecx, data);
 
 		svm->vcpu.arch.regs[VCPU_REGS_RAX] = data & 0xffffffff;
 		svm->vcpu.arch.regs[VCPU_REGS_RDX] = data >> 32;
@@ -2163,8 +2152,7 @@ static int wrmsr_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 	u64 data = (svm->vcpu.arch.regs[VCPU_REGS_RAX] & -1u)
 		| ((u64)(svm->vcpu.arch.regs[VCPU_REGS_RDX] & -1u) << 32);
 
-	KVMTRACE_3D(MSR_WRITE, &svm->vcpu, ecx, (u32)data, (u32)(data >> 32),
-		    handler);
+	trace_kvm_msr_write(ecx, data);
 
 	svm->next_rip = kvm_rip_read(&svm->vcpu) + 2;
 	if (svm_set_msr(&svm->vcpu, ecx, data))
@@ -2185,8 +2173,6 @@ static int msr_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 static int interrupt_window_interception(struct vcpu_svm *svm,
 				   struct kvm_run *kvm_run)
 {
-	KVMTRACE_0D(PEND_INTR, &svm->vcpu, handler);
-
 	svm_clear_vintr(svm);
 	svm->vmcb->control.int_ctl &= ~V_IRQ_MASK;
 	/*
@@ -2265,8 +2251,7 @@ static int handle_exit(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
 	struct vcpu_svm *svm = to_svm(vcpu);
 	u32 exit_code = svm->vmcb->control.exit_code;
 
-	KVMTRACE_3D(VMEXIT, vcpu, exit_code, (u32)svm->vmcb->save.rip,
-		    (u32)((u64)svm->vmcb->save.rip >> 32), entryexit);
+	trace_kvm_exit(exit_code, svm->vmcb->save.rip);
 
 	if (is_nested(svm)) {
 		nsvm_printk("nested handle_exit: 0x%x | 0x%lx | 0x%lx | 0x%lx\n",
@@ -2354,7 +2339,7 @@ static inline void svm_inject_irq(struct vcpu_svm *svm, int irq)
 {
 	struct vmcb_control_area *control;
 
-	KVMTRACE_1D(INJ_VIRQ, &svm->vcpu, (u32)irq, handler);
+	trace_kvm_inj_virq(irq);
 
 	++svm->vcpu.stat.irq_injections;
 	control = &svm->vmcb->control;
@@ -2717,6 +2702,59 @@ static u64 svm_get_mt_mask(struct kvm_vcpu *vcpu, gfn_t gfn, bool is_mmio)
 	return 0;
 }
 
+static const struct trace_print_flags svm_exit_reasons_str[] = {
+	{ SVM_EXIT_READ_CR0,           		"read_cr0" },
+	{ SVM_EXIT_READ_CR3,	      		"read_cr3" },
+	{ SVM_EXIT_READ_CR4,	      		"read_cr4" },
+	{ SVM_EXIT_READ_CR8,  	      		"read_cr8" },
+	{ SVM_EXIT_WRITE_CR0,          		"write_cr0" },
+	{ SVM_EXIT_WRITE_CR3,	      		"write_cr3" },
+	{ SVM_EXIT_WRITE_CR4,          		"write_cr4" },
+	{ SVM_EXIT_WRITE_CR8, 	      		"write_cr8" },
+	{ SVM_EXIT_READ_DR0, 	      		"read_dr0" },
+	{ SVM_EXIT_READ_DR1,	      		"read_dr1" },
+	{ SVM_EXIT_READ_DR2,	      		"read_dr2" },
+	{ SVM_EXIT_READ_DR3,	      		"read_dr3" },
+	{ SVM_EXIT_WRITE_DR0,	      		"write_dr0" },
+	{ SVM_EXIT_WRITE_DR1,	      		"write_dr1" },
+	{ SVM_EXIT_WRITE_DR2,	      		"write_dr2" },
+	{ SVM_EXIT_WRITE_DR3,	      		"write_dr3" },
+	{ SVM_EXIT_WRITE_DR5,	      		"write_dr5" },
+	{ SVM_EXIT_WRITE_DR7,	      		"write_dr7" },
+	{ SVM_EXIT_EXCP_BASE + DB_VECTOR,	"DB excp" },
+	{ SVM_EXIT_EXCP_BASE + BP_VECTOR,	"BP excp" },
+	{ SVM_EXIT_EXCP_BASE + UD_VECTOR,	"UD excp" },
+	{ SVM_EXIT_EXCP_BASE + PF_VECTOR,	"PF excp" },
+	{ SVM_EXIT_EXCP_BASE + NM_VECTOR,	"NM excp" },
+	{ SVM_EXIT_EXCP_BASE + MC_VECTOR,	"MC excp" },
+	{ SVM_EXIT_INTR,			"interrupt" },
+	{ SVM_EXIT_NMI,				"nmi" },
+	{ SVM_EXIT_SMI,				"smi" },
+	{ SVM_EXIT_INIT,			"init" },
+	{ SVM_EXIT_VINTR,			"vintr" },
+	{ SVM_EXIT_CPUID,			"cpuid" },
+	{ SVM_EXIT_INVD,			"invd" },
+	{ SVM_EXIT_HLT,				"hlt" },
+	{ SVM_EXIT_INVLPG,			"invlpg" },
+	{ SVM_EXIT_INVLPGA,			"invlpga" },
+	{ SVM_EXIT_IOIO,			"io" },
+	{ SVM_EXIT_MSR,				"msr" },
+	{ SVM_EXIT_TASK_SWITCH,			"task_switch" },
+	{ SVM_EXIT_SHUTDOWN,			"shutdown" },
+	{ SVM_EXIT_VMRUN,			"vmrun" },
+	{ SVM_EXIT_VMMCALL,			"hypercall" },
+	{ SVM_EXIT_VMLOAD,			"vmload" },
+	{ SVM_EXIT_VMSAVE,			"vmsave" },
+	{ SVM_EXIT_STGI,			"stgi" },
+	{ SVM_EXIT_CLGI,			"clgi" },
+	{ SVM_EXIT_SKINIT,			"skinit" },
+	{ SVM_EXIT_WBINVD,			"wbinvd" },
+	{ SVM_EXIT_MONITOR,			"monitor" },
+	{ SVM_EXIT_MWAIT,			"mwait" },
+	{ SVM_EXIT_NPF,				"npf" },
+	{ -1, NULL }
+};
+
 static struct kvm_x86_ops svm_x86_ops = {
 	.cpu_has_kvm_support = has_svm,
 	.disabled_by_bios = is_disabled,
@@ -2778,6 +2816,8 @@ static struct kvm_x86_ops svm_x86_ops = {
 	.set_tss_addr = svm_set_tss_addr,
 	.get_tdp_level = get_npt_level,
 	.get_mt_mask = svm_get_mt_mask,
+
+	.exit_reasons_str = svm_exit_reasons_str,
 };
 
 static int __init svm_init(void)
diff --git a/arch/x86/kvm/trace.h b/arch/x86/kvm/trace.h
new file mode 100644
index 00000000000..cd8c90db41a
--- /dev/null
+++ b/arch/x86/kvm/trace.h
@@ -0,0 +1,260 @@
+#if !defined(_TRACE_KVM_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_KVM_H
+
+#include <linux/tracepoint.h>
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM kvm
+#define TRACE_INCLUDE_PATH arch/x86/kvm
+#define TRACE_INCLUDE_FILE trace
+
+/*
+ * Tracepoint for guest mode entry.
+ */
+TRACE_EVENT(kvm_entry,
+	TP_PROTO(unsigned int vcpu_id),
+	TP_ARGS(vcpu_id),
+
+	TP_STRUCT__entry(
+		__field(	unsigned int,	vcpu_id		)
+	),
+
+	TP_fast_assign(
+		__entry->vcpu_id	= vcpu_id;
+	),
+
+	TP_printk("vcpu %u", __entry->vcpu_id)
+);
+
+/*
+ * Tracepoint for hypercall.
+ */
+TRACE_EVENT(kvm_hypercall,
+	TP_PROTO(unsigned long nr, unsigned long a0, unsigned long a1,
+		 unsigned long a2, unsigned long a3),
+	TP_ARGS(nr, a0, a1, a2, a3),
+
+	TP_STRUCT__entry(
+		__field(	unsigned long, 	nr		)
+		__field(	unsigned long,	a0		)
+		__field(	unsigned long,	a1		)
+		__field(	unsigned long,	a2		)
+		__field(	unsigned long,	a3		)
+	),
+
+	TP_fast_assign(
+		__entry->nr		= nr;
+		__entry->a0		= a0;
+		__entry->a1		= a1;
+		__entry->a2		= a2;
+		__entry->a3		= a3;
+	),
+
+	TP_printk("nr 0x%lx a0 0x%lx a1 0x%lx a2 0x%lx a3 0x%lx",
+		 __entry->nr, __entry->a0, __entry->a1,  __entry->a2,
+		 __entry->a3)
+);
+
+/*
+ * Tracepoint for PIO.
+ */
+TRACE_EVENT(kvm_pio,
+	TP_PROTO(unsigned int rw, unsigned int port, unsigned int size,
+		 unsigned int count),
+	TP_ARGS(rw, port, size, count),
+
+	TP_STRUCT__entry(
+		__field(	unsigned int, 	rw		)
+		__field(	unsigned int, 	port		)
+		__field(	unsigned int, 	size		)
+		__field(	unsigned int,	count		)
+	),
+
+	TP_fast_assign(
+		__entry->rw		= rw;
+		__entry->port		= port;
+		__entry->size		= size;
+		__entry->count		= count;
+	),
+
+	TP_printk("pio_%s at 0x%x size %d count %d",
+		  __entry->rw ? "write" : "read",
+		  __entry->port, __entry->size, __entry->count)
+);
+
+/*
+ * Tracepoint for cpuid.
+ */
+TRACE_EVENT(kvm_cpuid,
+	TP_PROTO(unsigned int function, unsigned long rax, unsigned long rbx,
+		 unsigned long rcx, unsigned long rdx),
+	TP_ARGS(function, rax, rbx, rcx, rdx),
+
+	TP_STRUCT__entry(
+		__field(	unsigned int,	function	)
+		__field(	unsigned long,	rax		)
+		__field(	unsigned long,	rbx		)
+		__field(	unsigned long,	rcx		)
+		__field(	unsigned long,	rdx		)
+	),
+
+	TP_fast_assign(
+		__entry->function	= function;
+		__entry->rax		= rax;
+		__entry->rbx		= rbx;
+		__entry->rcx		= rcx;
+		__entry->rdx		= rdx;
+	),
+
+	TP_printk("func %x rax %lx rbx %lx rcx %lx rdx %lx",
+		  __entry->function, __entry->rax,
+		  __entry->rbx, __entry->rcx, __entry->rdx)
+);
+
+/*
+ * Tracepoint for apic access.
+ */
+TRACE_EVENT(kvm_apic,
+	TP_PROTO(unsigned int rw, unsigned int reg, unsigned int val),
+	TP_ARGS(rw, reg, val),
+
+	TP_STRUCT__entry(
+		__field(	unsigned int,	rw		)
+		__field(	unsigned int,	reg		)
+		__field(	unsigned int,	val		)
+	),
+
+	TP_fast_assign(
+		__entry->rw		= rw;
+		__entry->reg		= reg;
+		__entry->val		= val;
+	),
+
+	TP_printk("apic_%s 0x%x = 0x%x",
+		  __entry->rw ? "write" : "read",
+		  __entry->reg, __entry->val)
+);
+
+#define trace_kvm_apic_read(reg, val)		trace_kvm_apic(0, reg, val)
+#define trace_kvm_apic_write(reg, val)		trace_kvm_apic(1, reg, val)
+
+/*
+ * Tracepoint for kvm guest exit:
+ */
+TRACE_EVENT(kvm_exit,
+	TP_PROTO(unsigned int exit_reason, unsigned long guest_rip),
+	TP_ARGS(exit_reason, guest_rip),
+
+	TP_STRUCT__entry(
+		__field(	unsigned int,	exit_reason	)
+		__field(	unsigned long,	guest_rip	)
+	),
+
+	TP_fast_assign(
+		__entry->exit_reason	= exit_reason;
+		__entry->guest_rip	= guest_rip;
+	),
+
+	TP_printk("reason %s rip 0x%lx",
+		 ftrace_print_symbols_seq(p, __entry->exit_reason,
+					  kvm_x86_ops->exit_reasons_str),
+		 __entry->guest_rip)
+);
+
+/*
+ * Tracepoint for kvm interrupt injection:
+ */
+TRACE_EVENT(kvm_inj_virq,
+	TP_PROTO(unsigned int irq),
+	TP_ARGS(irq),
+
+	TP_STRUCT__entry(
+		__field(	unsigned int,	irq		)
+	),
+
+	TP_fast_assign(
+		__entry->irq		= irq;
+	),
+
+	TP_printk("irq %u", __entry->irq)
+);
+
+/*
+ * Tracepoint for page fault.
+ */
+TRACE_EVENT(kvm_page_fault,
+	TP_PROTO(unsigned long fault_address, unsigned int error_code),
+	TP_ARGS(fault_address, error_code),
+
+	TP_STRUCT__entry(
+		__field(	unsigned long,	fault_address	)
+		__field(	unsigned int,	error_code	)
+	),
+
+	TP_fast_assign(
+		__entry->fault_address	= fault_address;
+		__entry->error_code	= error_code;
+	),
+
+	TP_printk("address %lx error_code %x",
+		  __entry->fault_address, __entry->error_code)
+);
+
+/*
+ * Tracepoint for guest MSR access.
+ */
+TRACE_EVENT(kvm_msr,
+	TP_PROTO(unsigned int rw, unsigned int ecx, unsigned long data),
+	TP_ARGS(rw, ecx, data),
+
+	TP_STRUCT__entry(
+		__field(	unsigned int,	rw		)
+		__field(	unsigned int,	ecx		)
+		__field(	unsigned long,	data		)
+	),
+
+	TP_fast_assign(
+		__entry->rw		= rw;
+		__entry->ecx		= ecx;
+		__entry->data		= data;
+	),
+
+	TP_printk("msr_%s %x = 0x%lx",
+		  __entry->rw ? "write" : "read",
+		  __entry->ecx, __entry->data)
+);
+
+#define trace_kvm_msr_read(ecx, data)		trace_kvm_msr(0, ecx, data)
+#define trace_kvm_msr_write(ecx, data)		trace_kvm_msr(1, ecx, data)
+
+/*
+ * Tracepoint for guest CR access.
+ */
+TRACE_EVENT(kvm_cr,
+	TP_PROTO(unsigned int rw, unsigned int cr, unsigned long val),
+	TP_ARGS(rw, cr, val),
+
+	TP_STRUCT__entry(
+		__field(	unsigned int,	rw		)
+		__field(	unsigned int,	cr		)
+		__field(	unsigned long,	val		)
+	),
+
+	TP_fast_assign(
+		__entry->rw		= rw;
+		__entry->cr		= cr;
+		__entry->val		= val;
+	),
+
+	TP_printk("cr_%s %x = 0x%lx",
+		  __entry->rw ? "write" : "read",
+		  __entry->cr, __entry->val)
+);
+
+#define trace_kvm_cr_read(cr, val)		trace_kvm_cr(0, cr, val)
+#define trace_kvm_cr_write(cr, val)		trace_kvm_cr(1, cr, val)
+
+#endif /* _TRACE_KVM_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 1a84ca191cd..c6256b98f07 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -25,6 +25,7 @@
 #include <linux/highmem.h>
 #include <linux/sched.h>
 #include <linux/moduleparam.h>
+#include <linux/ftrace_event.h>
 #include "kvm_cache_regs.h"
 #include "x86.h"
 
@@ -34,6 +35,8 @@
 #include <asm/virtext.h>
 #include <asm/mce.h>
 
+#include "trace.h"
+
 #define __ex(x) __kvm_handle_fault_on_reboot(x)
 
 MODULE_AUTHOR("Qumranet");
@@ -2550,7 +2553,7 @@ static void vmx_inject_irq(struct kvm_vcpu *vcpu)
 	uint32_t intr;
 	int irq = vcpu->arch.interrupt.nr;
 
-	KVMTRACE_1D(INJ_VIRQ, vcpu, (u32)irq, handler);
+	trace_kvm_inj_virq(irq);
 
 	++vcpu->stat.irq_injections;
 	if (vmx->rmode.vm86_active) {
@@ -2751,8 +2754,8 @@ static int handle_exception(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 		if (enable_ept)
 			BUG();
 		cr2 = vmcs_readl(EXIT_QUALIFICATION);
-		KVMTRACE_3D(PAGE_FAULT, vcpu, error_code, (u32)cr2,
-			    (u32)((u64)cr2 >> 32), handler);
+		trace_kvm_page_fault(cr2, error_code);
+
 		if (kvm_event_needs_reinjection(vcpu))
 			kvm_mmu_unprotect_page_virt(vcpu, cr2);
 		return kvm_mmu_page_fault(vcpu, cr2, error_code);
@@ -2799,7 +2802,6 @@ static int handle_external_interrupt(struct kvm_vcpu *vcpu,
 				     struct kvm_run *kvm_run)
 {
 	++vcpu->stat.irq_exits;
-	KVMTRACE_1D(INTR, vcpu, vmcs_read32(VM_EXIT_INTR_INFO), handler);
 	return 1;
 }
 
@@ -2847,7 +2849,7 @@ vmx_patch_hypercall(struct kvm_vcpu *vcpu, unsigned char *hypercall)
 
 static int handle_cr(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 {
-	unsigned long exit_qualification;
+	unsigned long exit_qualification, val;
 	int cr;
 	int reg;
 
@@ -2856,21 +2858,19 @@ static int handle_cr(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	reg = (exit_qualification >> 8) & 15;
 	switch ((exit_qualification >> 4) & 3) {
 	case 0: /* mov to cr */
-		KVMTRACE_3D(CR_WRITE, vcpu, (u32)cr,
-			    (u32)kvm_register_read(vcpu, reg),
-			    (u32)((u64)kvm_register_read(vcpu, reg) >> 32),
-			    handler);
+		val = kvm_register_read(vcpu, reg);
+		trace_kvm_cr_write(cr, val);
 		switch (cr) {
 		case 0:
-			kvm_set_cr0(vcpu, kvm_register_read(vcpu, reg));
+			kvm_set_cr0(vcpu, val);
 			skip_emulated_instruction(vcpu);
 			return 1;
 		case 3:
-			kvm_set_cr3(vcpu, kvm_register_read(vcpu, reg));
+			kvm_set_cr3(vcpu, val);
 			skip_emulated_instruction(vcpu);
 			return 1;
 		case 4:
-			kvm_set_cr4(vcpu, kvm_register_read(vcpu, reg));
+			kvm_set_cr4(vcpu, val);
 			skip_emulated_instruction(vcpu);
 			return 1;
 		case 8: {
@@ -2892,23 +2892,19 @@ static int handle_cr(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 		vcpu->arch.cr0 &= ~X86_CR0_TS;
 		vmcs_writel(CR0_READ_SHADOW, vcpu->arch.cr0);
 		vmx_fpu_activate(vcpu);
-		KVMTRACE_0D(CLTS, vcpu, handler);
 		skip_emulated_instruction(vcpu);
 		return 1;
 	case 1: /*mov from cr*/
 		switch (cr) {
 		case 3:
 			kvm_register_write(vcpu, reg, vcpu->arch.cr3);
-			KVMTRACE_3D(CR_READ, vcpu, (u32)cr,
-				    (u32)kvm_register_read(vcpu, reg),
-				    (u32)((u64)kvm_register_read(vcpu, reg) >> 32),
-				    handler);
+			trace_kvm_cr_read(cr, vcpu->arch.cr3);
 			skip_emulated_instruction(vcpu);
 			return 1;
 		case 8:
-			kvm_register_write(vcpu, reg, kvm_get_cr8(vcpu));
-			KVMTRACE_2D(CR_READ, vcpu, (u32)cr,
-				    (u32)kvm_register_read(vcpu, reg), handler);
+			val = kvm_get_cr8(vcpu);
+			kvm_register_write(vcpu, reg, val);
+			trace_kvm_cr_read(cr, val);
 			skip_emulated_instruction(vcpu);
 			return 1;
 		}
@@ -2976,7 +2972,6 @@ static int handle_dr(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 			val = 0;
 		}
 		kvm_register_write(vcpu, reg, val);
-		KVMTRACE_2D(DR_READ, vcpu, (u32)dr, (u32)val, handler);
 	} else {
 		val = vcpu->arch.regs[reg];
 		switch (dr) {
@@ -3009,7 +3004,6 @@ static int handle_dr(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 			}
 			break;
 		}
-		KVMTRACE_2D(DR_WRITE, vcpu, (u32)dr, (u32)val, handler);
 	}
 	skip_emulated_instruction(vcpu);
 	return 1;
@@ -3031,8 +3025,7 @@ static int handle_rdmsr(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 		return 1;
 	}
 
-	KVMTRACE_3D(MSR_READ, vcpu, ecx, (u32)data, (u32)(data >> 32),
-		    handler);
+	trace_kvm_msr_read(ecx, data);
 
 	/* FIXME: handling of bits 32:63 of rax, rdx */
 	vcpu->arch.regs[VCPU_REGS_RAX] = data & -1u;
@@ -3047,8 +3040,7 @@ static int handle_wrmsr(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	u64 data = (vcpu->arch.regs[VCPU_REGS_RAX] & -1u)
 		| ((u64)(vcpu->arch.regs[VCPU_REGS_RDX] & -1u) << 32);
 
-	KVMTRACE_3D(MSR_WRITE, vcpu, ecx, (u32)data, (u32)(data >> 32),
-		    handler);
+	trace_kvm_msr_write(ecx, data);
 
 	if (vmx_set_msr(vcpu, ecx, data) != 0) {
 		kvm_inject_gp(vcpu, 0);
@@ -3075,7 +3067,6 @@ static int handle_interrupt_window(struct kvm_vcpu *vcpu,
 	cpu_based_vm_exec_control &= ~CPU_BASED_VIRTUAL_INTR_PENDING;
 	vmcs_write32(CPU_BASED_VM_EXEC_CONTROL, cpu_based_vm_exec_control);
 
-	KVMTRACE_0D(PEND_INTR, vcpu, handler);
 	++vcpu->stat.irq_window_exits;
 
 	/*
@@ -3227,6 +3218,7 @@ static int handle_ept_violation(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	}
 
 	gpa = vmcs_read64(GUEST_PHYSICAL_ADDRESS);
+	trace_kvm_page_fault(gpa, exit_qualification);
 	return kvm_mmu_page_fault(vcpu, gpa & PAGE_MASK, 0);
 }
 
@@ -3410,8 +3402,7 @@ static int vmx_handle_exit(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
 	u32 exit_reason = vmx->exit_reason;
 	u32 vectoring_info = vmx->idt_vectoring_info;
 
-	KVMTRACE_3D(VMEXIT, vcpu, exit_reason, (u32)kvm_rip_read(vcpu),
-		    (u32)((u64)kvm_rip_read(vcpu) >> 32), entryexit);
+	trace_kvm_exit(exit_reason, kvm_rip_read(vcpu));
 
 	/* If we need to emulate an MMIO from handle_invalid_guest_state
 	 * we just return 0 */
@@ -3500,10 +3491,8 @@ static void vmx_complete_interrupts(struct vcpu_vmx *vmx)
 
 	/* We need to handle NMIs before interrupts are enabled */
 	if ((exit_intr_info & INTR_INFO_INTR_TYPE_MASK) == INTR_TYPE_NMI_INTR &&
-	    (exit_intr_info & INTR_INFO_VALID_MASK)) {
-		KVMTRACE_0D(NMI, &vmx->vcpu, handler);
+	    (exit_intr_info & INTR_INFO_VALID_MASK))
 		asm("int $2");
-	}
 
 	idtv_info_valid = idt_vectoring_info & VECTORING_INFO_VALID_MASK;
 
@@ -3891,6 +3880,29 @@ static u64 vmx_get_mt_mask(struct kvm_vcpu *vcpu, gfn_t gfn, bool is_mmio)
 	return ret;
 }
 
+static const struct trace_print_flags vmx_exit_reasons_str[] = {
+	{ EXIT_REASON_EXCEPTION_NMI,           "exception" },
+	{ EXIT_REASON_EXTERNAL_INTERRUPT,      "ext_irq" },
+	{ EXIT_REASON_TRIPLE_FAULT,            "triple_fault" },
+	{ EXIT_REASON_NMI_WINDOW,              "nmi_window" },
+	{ EXIT_REASON_IO_INSTRUCTION,          "io_instruction" },
+	{ EXIT_REASON_CR_ACCESS,               "cr_access" },
+	{ EXIT_REASON_DR_ACCESS,               "dr_access" },
+	{ EXIT_REASON_CPUID,                   "cpuid" },
+	{ EXIT_REASON_MSR_READ,                "rdmsr" },
+	{ EXIT_REASON_MSR_WRITE,               "wrmsr" },
+	{ EXIT_REASON_PENDING_INTERRUPT,       "interrupt_window" },
+	{ EXIT_REASON_HLT,                     "halt" },
+	{ EXIT_REASON_INVLPG,                  "invlpg" },
+	{ EXIT_REASON_VMCALL,                  "hypercall" },
+	{ EXIT_REASON_TPR_BELOW_THRESHOLD,     "tpr_below_thres" },
+	{ EXIT_REASON_APIC_ACCESS,             "apic_access" },
+	{ EXIT_REASON_WBINVD,                  "wbinvd" },
+	{ EXIT_REASON_TASK_SWITCH,             "task_switch" },
+	{ EXIT_REASON_EPT_VIOLATION,           "ept_violation" },
+	{ -1, NULL }
+};
+
 static struct kvm_x86_ops vmx_x86_ops = {
 	.cpu_has_kvm_support = cpu_has_kvm_support,
 	.disabled_by_bios = vmx_disabled_by_bios,
@@ -3950,6 +3962,8 @@ static struct kvm_x86_ops vmx_x86_ops = {
 	.set_tss_addr = vmx_set_tss_addr,
 	.get_tdp_level = get_ept_level,
 	.get_mt_mask = vmx_get_mt_mask,
+
+	.exit_reasons_str = vmx_exit_reasons_str,
 };
 
 static int __init vmx_init(void)
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index a066876f137..892a7a60c81 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -37,6 +37,8 @@
 #include <linux/iommu.h>
 #include <linux/intel-iommu.h>
 #include <linux/cpufreq.h>
+#define CREATE_TRACE_POINTS
+#include "trace.h"
 
 #include <asm/uaccess.h>
 #include <asm/msr.h>
@@ -347,9 +349,6 @@ EXPORT_SYMBOL_GPL(kvm_set_cr0);
 void kvm_lmsw(struct kvm_vcpu *vcpu, unsigned long msw)
 {
 	kvm_set_cr0(vcpu, (vcpu->arch.cr0 & ~0x0ful) | (msw & 0x0f));
-	KVMTRACE_1D(LMSW, vcpu,
-		    (u32)((vcpu->arch.cr0 & ~0x0ful) | (msw & 0x0f)),
-		    handler);
 }
 EXPORT_SYMBOL_GPL(kvm_lmsw);
 
@@ -2568,7 +2567,6 @@ int emulate_invlpg(struct kvm_vcpu *vcpu, gva_t address)
 
 int emulate_clts(struct kvm_vcpu *vcpu)
 {
-	KVMTRACE_0D(CLTS, vcpu, handler);
 	kvm_x86_ops->set_cr0(vcpu, vcpu->arch.cr0 & ~X86_CR0_TS);
 	return X86EMUL_CONTINUE;
 }
@@ -2851,12 +2849,8 @@ int kvm_emulate_pio(struct kvm_vcpu *vcpu, struct kvm_run *run, int in,
 	vcpu->arch.pio.down = 0;
 	vcpu->arch.pio.rep = 0;
 
-	if (vcpu->run->io.direction == KVM_EXIT_IO_IN)
-		KVMTRACE_2D(IO_READ, vcpu, vcpu->run->io.port, (u32)size,
-			    handler);
-	else
-		KVMTRACE_2D(IO_WRITE, vcpu, vcpu->run->io.port, (u32)size,
-			    handler);
+	trace_kvm_pio(vcpu->run->io.direction == KVM_EXIT_IO_OUT, port,
+		      size, 1);
 
 	val = kvm_register_read(vcpu, VCPU_REGS_RAX);
 	memcpy(vcpu->arch.pio_data, &val, 4);
@@ -2892,12 +2886,8 @@ int kvm_emulate_pio_string(struct kvm_vcpu *vcpu, struct kvm_run *run, int in,
 	vcpu->arch.pio.down = down;
 	vcpu->arch.pio.rep = rep;
 
-	if (vcpu->run->io.direction == KVM_EXIT_IO_IN)
-		KVMTRACE_2D(IO_READ, vcpu, vcpu->run->io.port, (u32)size,
-			    handler);
-	else
-		KVMTRACE_2D(IO_WRITE, vcpu, vcpu->run->io.port, (u32)size,
-			    handler);
+	trace_kvm_pio(vcpu->run->io.direction == KVM_EXIT_IO_OUT, port,
+		      size, count);
 
 	if (!count) {
 		kvm_x86_ops->skip_emulated_instruction(vcpu);
@@ -3075,7 +3065,6 @@ void kvm_arch_exit(void)
 int kvm_emulate_halt(struct kvm_vcpu *vcpu)
 {
 	++vcpu->stat.halt_exits;
-	KVMTRACE_0D(HLT, vcpu, handler);
 	if (irqchip_in_kernel(vcpu->kvm)) {
 		vcpu->arch.mp_state = KVM_MP_STATE_HALTED;
 		return 1;
@@ -3106,7 +3095,7 @@ int kvm_emulate_hypercall(struct kvm_vcpu *vcpu)
 	a2 = kvm_register_read(vcpu, VCPU_REGS_RDX);
 	a3 = kvm_register_read(vcpu, VCPU_REGS_RSI);
 
-	KVMTRACE_1D(VMMCALL, vcpu, (u32)nr, handler);
+	trace_kvm_hypercall(nr, a0, a1, a2, a3);
 
 	if (!is_long_mode(vcpu)) {
 		nr &= 0xFFFFFFFF;
@@ -3206,8 +3195,6 @@ unsigned long realmode_get_cr(struct kvm_vcpu *vcpu, int cr)
 		vcpu_printf(vcpu, "%s: unexpected cr %u\n", __func__, cr);
 		return 0;
 	}
-	KVMTRACE_3D(CR_READ, vcpu, (u32)cr, (u32)value,
-		    (u32)((u64)value >> 32), handler);
 
 	return value;
 }
@@ -3215,9 +3202,6 @@ unsigned long realmode_get_cr(struct kvm_vcpu *vcpu, int cr)
 void realmode_set_cr(struct kvm_vcpu *vcpu, int cr, unsigned long val,
 		     unsigned long *rflags)
 {
-	KVMTRACE_3D(CR_WRITE, vcpu, (u32)cr, (u32)val,
-		    (u32)((u64)val >> 32), handler);
-
 	switch (cr) {
 	case 0:
 		kvm_set_cr0(vcpu, mk_cr_64(vcpu->arch.cr0, val));
@@ -3327,11 +3311,11 @@ void kvm_emulate_cpuid(struct kvm_vcpu *vcpu)
 		kvm_register_write(vcpu, VCPU_REGS_RDX, best->edx);
 	}
 	kvm_x86_ops->skip_emulated_instruction(vcpu);
-	KVMTRACE_5D(CPUID, vcpu, function,
-		    (u32)kvm_register_read(vcpu, VCPU_REGS_RAX),
-		    (u32)kvm_register_read(vcpu, VCPU_REGS_RBX),
-		    (u32)kvm_register_read(vcpu, VCPU_REGS_RCX),
-		    (u32)kvm_register_read(vcpu, VCPU_REGS_RDX), handler);
+	trace_kvm_cpuid(function,
+			kvm_register_read(vcpu, VCPU_REGS_RAX),
+			kvm_register_read(vcpu, VCPU_REGS_RBX),
+			kvm_register_read(vcpu, VCPU_REGS_RCX),
+			kvm_register_read(vcpu, VCPU_REGS_RDX));
 }
 EXPORT_SYMBOL_GPL(kvm_emulate_cpuid);
 
@@ -3527,7 +3511,7 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 		set_debugreg(vcpu->arch.eff_db[3], 3);
 	}
 
-	KVMTRACE_0D(VMENTRY, vcpu, entryexit);
+	trace_kvm_entry(vcpu->vcpu_id);
 	kvm_x86_ops->run(vcpu, kvm_run);
 
 	if (unlikely(vcpu->arch.switch_db_regs)) {
@@ -4842,3 +4826,9 @@ int kvm_arch_interrupt_allowed(struct kvm_vcpu *vcpu)
 {
 	return kvm_x86_ops->interrupt_allowed(vcpu);
 }
+
+EXPORT_TRACEPOINT_SYMBOL_GPL(kvm_exit);
+EXPORT_TRACEPOINT_SYMBOL_GPL(kvm_inj_virq);
+EXPORT_TRACEPOINT_SYMBOL_GPL(kvm_page_fault);
+EXPORT_TRACEPOINT_SYMBOL_GPL(kvm_msr);
+EXPORT_TRACEPOINT_SYMBOL_GPL(kvm_cr);
-- 
cgit v1.2.3


From 0cb5762ed2b3113b3b8aa84d1d26b815aea71787 Mon Sep 17 00:00:00 2001
From: Andre Przywara <andre.przywara@amd.com>
Date: Wed, 17 Jun 2009 15:50:31 +0200
Subject: KVM: Allow emulation of syscalls instructions on #UD

Add the opcodes for syscall, sysenter and sysexit to the list of instructions
handled by the undefined opcode handler.

Signed-off-by: Christoph Egger <christoph.egger@amd.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/x86.c | 33 ++++++++++++++++++++++++++-------
 1 file changed, 26 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 892a7a60c81..57e76b37242 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -2667,14 +2667,33 @@ int emulate_instruction(struct kvm_vcpu *vcpu,
 
 		r = x86_decode_insn(&vcpu->arch.emulate_ctxt, &emulate_ops);
 
-		/* Reject the instructions other than VMCALL/VMMCALL when
-		 * try to emulate invalid opcode */
+		/* Only allow emulation of specific instructions on #UD
+		 * (namely VMMCALL, sysenter, sysexit, syscall)*/
 		c = &vcpu->arch.emulate_ctxt.decode;
-		if ((emulation_type & EMULTYPE_TRAP_UD) &&
-		    (!(c->twobyte && c->b == 0x01 &&
-		      (c->modrm_reg == 0 || c->modrm_reg == 3) &&
-		       c->modrm_mod == 3 && c->modrm_rm == 1)))
-			return EMULATE_FAIL;
+		if (emulation_type & EMULTYPE_TRAP_UD) {
+			if (!c->twobyte)
+				return EMULATE_FAIL;
+			switch (c->b) {
+			case 0x01: /* VMMCALL */
+				if (c->modrm_mod != 3 || c->modrm_rm != 1)
+					return EMULATE_FAIL;
+				break;
+			case 0x34: /* sysenter */
+			case 0x35: /* sysexit */
+				if (c->modrm_mod != 0 || c->modrm_rm != 0)
+					return EMULATE_FAIL;
+				break;
+			case 0x05: /* syscall */
+				if (c->modrm_mod != 0 || c->modrm_rm != 0)
+					return EMULATE_FAIL;
+				break;
+			default:
+				return EMULATE_FAIL;
+			}
+
+			if (!(c->modrm_reg == 0 || c->modrm_reg == 3))
+				return EMULATE_FAIL;
+		}
 
 		++vcpu->stat.insn_emulation;
 		if (r)  {
-- 
cgit v1.2.3


From b1d861431ed58f752b31e8c07da029072989bec7 Mon Sep 17 00:00:00 2001
From: Andre Przywara <andre.przywara@amd.com>
Date: Wed, 17 Jun 2009 15:50:32 +0200
Subject: KVM: x86 emulator: Add missing EFLAGS bit definitions

Signed-off-by: Christoph Egger <christoph.egger@amd.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/x86_emulate.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kvm/x86_emulate.c b/arch/x86/kvm/x86_emulate.c
index ef4dfca3ed7..67af33aeb3f 100644
--- a/arch/x86/kvm/x86_emulate.c
+++ b/arch/x86/kvm/x86_emulate.c
@@ -320,8 +320,11 @@ static u32 group2_table[] = {
 };
 
 /* EFLAGS bit definitions. */
+#define EFLG_VM (1<<17)
+#define EFLG_RF (1<<16)
 #define EFLG_OF (1<<11)
 #define EFLG_DF (1<<10)
+#define EFLG_IF (1<<9)
 #define EFLG_SF (1<<7)
 #define EFLG_ZF (1<<6)
 #define EFLG_AF (1<<4)
-- 
cgit v1.2.3


From e99f0507125f45b723a9069e9e854c3c4758e7ba Mon Sep 17 00:00:00 2001
From: Andre Przywara <andre.przywara@amd.com>
Date: Wed, 17 Jun 2009 15:50:33 +0200
Subject: KVM: x86 emulator: Prepare for emulation of syscall instructions

Add the flags needed for syscall, sysenter and sysexit to the opcode table.
Catch (but for now ignore) the opcodes in the emulation switch/case.

Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Christoph Egger <christoph.egger@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/x86_emulate.c | 17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/x86_emulate.c b/arch/x86/kvm/x86_emulate.c
index 67af33aeb3f..b0da29d7403 100644
--- a/arch/x86/kvm/x86_emulate.c
+++ b/arch/x86/kvm/x86_emulate.c
@@ -32,6 +32,8 @@
 #include <linux/module.h>
 #include <asm/kvm_x86_emulate.h>
 
+#include "mmu.h"		/* for is_long_mode() */
+
 /*
  * Opcode effective-address decode tables.
  * Note that we only emulate instructions that have at least one memory
@@ -209,7 +211,7 @@ static u32 opcode_table[256] = {
 
 static u32 twobyte_table[256] = {
 	/* 0x00 - 0x0F */
-	0, Group | GroupDual | Group7, 0, 0, 0, 0, ImplicitOps, 0,
+	0, Group | GroupDual | Group7, 0, 0, 0, ImplicitOps, ImplicitOps, 0,
 	ImplicitOps, ImplicitOps, 0, 0, 0, ImplicitOps | ModRM, 0, 0,
 	/* 0x10 - 0x1F */
 	0, 0, 0, 0, 0, 0, 0, 0, ImplicitOps | ModRM, 0, 0, 0, 0, 0, 0, 0,
@@ -217,7 +219,9 @@ static u32 twobyte_table[256] = {
 	ModRM | ImplicitOps, ModRM, ModRM | ImplicitOps, ModRM, 0, 0, 0, 0,
 	0, 0, 0, 0, 0, 0, 0, 0,
 	/* 0x30 - 0x3F */
-	ImplicitOps, 0, ImplicitOps, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+	ImplicitOps, 0, ImplicitOps, 0,
+	ImplicitOps, ImplicitOps, 0, 0,
+	0, 0, 0, 0, 0, 0, 0, 0,
 	/* 0x40 - 0x47 */
 	DstReg | SrcMem | ModRM | Mov, DstReg | SrcMem | ModRM | Mov,
 	DstReg | SrcMem | ModRM | Mov, DstReg | SrcMem | ModRM | Mov,
@@ -1988,6 +1992,9 @@ twobyte_insn:
 			goto cannot_emulate;
 		}
 		break;
+	case 0x05: 		/* syscall */
+		goto cannot_emulate;
+		break;
 	case 0x06:
 		emulate_clts(ctxt->vcpu);
 		c->dst.type = OP_NONE;
@@ -2054,6 +2061,12 @@ twobyte_insn:
 		rc = X86EMUL_CONTINUE;
 		c->dst.type = OP_NONE;
 		break;
+	case 0x34:		/* sysenter */
+		goto cannot_emulate;
+		break;
+	case 0x35:		/* sysexit */
+		goto cannot_emulate;
+		break;
 	case 0x40 ... 0x4f:	/* cmov */
 		c->dst.val = c->dst.orig_val = c->src.val;
 		if (!test_cc(c->b, ctxt->eflags))
-- 
cgit v1.2.3


From e66bb2ccdcf76d032bbb464b35c292bb3ee58f9b Mon Sep 17 00:00:00 2001
From: Andre Przywara <andre.przywara@amd.com>
Date: Thu, 18 Jun 2009 12:56:00 +0200
Subject: KVM: x86 emulator: add syscall emulation

Handle #UD intercept of the syscall instruction in 32bit compat mode on
an Intel host.
Setup the segment descriptors for CS and SS and the EIP/ESP registers
according to the manual. Save the RIP and EFLAGS to the correct registers.

[avi: fix build on i386 due to missing R11]

Signed-off-by: Christoph Egger <christoph.egger@amd.com>
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/x86_emulate.c | 84 +++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 83 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/x86_emulate.c b/arch/x86/kvm/x86_emulate.c
index b0da29d7403..4d7256da59d 100644
--- a/arch/x86/kvm/x86_emulate.c
+++ b/arch/x86/kvm/x86_emulate.c
@@ -1397,6 +1397,85 @@ static void toggle_interruptibility(struct x86_emulate_ctxt *ctxt, u32 mask)
 		ctxt->interruptibility = mask;
 }
 
+static inline void
+setup_syscalls_segments(struct x86_emulate_ctxt *ctxt,
+	struct kvm_segment *cs, struct kvm_segment *ss)
+{
+	memset(cs, 0, sizeof(struct kvm_segment));
+	kvm_x86_ops->get_segment(ctxt->vcpu, cs, VCPU_SREG_CS);
+	memset(ss, 0, sizeof(struct kvm_segment));
+
+	cs->l = 0;		/* will be adjusted later */
+	cs->base = 0;		/* flat segment */
+	cs->g = 1;		/* 4kb granularity */
+	cs->limit = 0xffffffff;	/* 4GB limit */
+	cs->type = 0x0b;	/* Read, Execute, Accessed */
+	cs->s = 1;
+	cs->dpl = 0;		/* will be adjusted later */
+	cs->present = 1;
+	cs->db = 1;
+
+	ss->unusable = 0;
+	ss->base = 0;		/* flat segment */
+	ss->limit = 0xffffffff;	/* 4GB limit */
+	ss->g = 1;		/* 4kb granularity */
+	ss->s = 1;
+	ss->type = 0x03;	/* Read/Write, Accessed */
+	ss->db = 1;		/* 32bit stack segment */
+	ss->dpl = 0;
+	ss->present = 1;
+}
+
+static int
+emulate_syscall(struct x86_emulate_ctxt *ctxt)
+{
+	struct decode_cache *c = &ctxt->decode;
+	struct kvm_segment cs, ss;
+	u64 msr_data;
+
+	/* syscall is not available in real mode */
+	if (c->lock_prefix || ctxt->mode == X86EMUL_MODE_REAL
+		|| !(ctxt->vcpu->arch.cr0 & X86_CR0_PE))
+		return -1;
+
+	setup_syscalls_segments(ctxt, &cs, &ss);
+
+	kvm_x86_ops->get_msr(ctxt->vcpu, MSR_STAR, &msr_data);
+	msr_data >>= 32;
+	cs.selector = (u16)(msr_data & 0xfffc);
+	ss.selector = (u16)(msr_data + 8);
+
+	if (is_long_mode(ctxt->vcpu)) {
+		cs.db = 0;
+		cs.l = 1;
+	}
+	kvm_x86_ops->set_segment(ctxt->vcpu, &cs, VCPU_SREG_CS);
+	kvm_x86_ops->set_segment(ctxt->vcpu, &ss, VCPU_SREG_SS);
+
+	c->regs[VCPU_REGS_RCX] = c->eip;
+	if (is_long_mode(ctxt->vcpu)) {
+#ifdef CONFIG_X86_64
+		c->regs[VCPU_REGS_R11] = ctxt->eflags & ~EFLG_RF;
+
+		kvm_x86_ops->get_msr(ctxt->vcpu,
+			ctxt->mode == X86EMUL_MODE_PROT64 ?
+			MSR_LSTAR : MSR_CSTAR, &msr_data);
+		c->eip = msr_data;
+
+		kvm_x86_ops->get_msr(ctxt->vcpu, MSR_SYSCALL_MASK, &msr_data);
+		ctxt->eflags &= ~(msr_data | EFLG_RF);
+#endif
+	} else {
+		/* legacy mode */
+		kvm_x86_ops->get_msr(ctxt->vcpu, MSR_STAR, &msr_data);
+		c->eip = (u32)msr_data;
+
+		ctxt->eflags &= ~(EFLG_VM | EFLG_IF | EFLG_RF);
+	}
+
+	return 0;
+}
+
 int
 x86_emulate_insn(struct x86_emulate_ctxt *ctxt, struct x86_emulate_ops *ops)
 {
@@ -1993,7 +2072,10 @@ twobyte_insn:
 		}
 		break;
 	case 0x05: 		/* syscall */
-		goto cannot_emulate;
+		if (emulate_syscall(ctxt) == -1)
+			goto cannot_emulate;
+		else
+			goto writeback;
 		break;
 	case 0x06:
 		emulate_clts(ctxt->vcpu);
-- 
cgit v1.2.3


From 8c60435261deaefeb53ce3222d04d7d5bea81296 Mon Sep 17 00:00:00 2001
From: Andre Przywara <andre.przywara@amd.com>
Date: Thu, 18 Jun 2009 12:56:01 +0200
Subject: KVM: x86 emulator: Add sysenter emulation

Handle #UD intercept of the sysenter instruction in 32bit compat mode on
an AMD host.
Setup the segment descriptors for CS and SS and the EIP/ESP registers
according to the manual.

Signed-off-by: Christoph Egger <christoph.egger@amd.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/x86_emulate.c | 70 +++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 69 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/x86_emulate.c b/arch/x86/kvm/x86_emulate.c
index 4d7256da59d..7a9bddb3ebd 100644
--- a/arch/x86/kvm/x86_emulate.c
+++ b/arch/x86/kvm/x86_emulate.c
@@ -1476,6 +1476,71 @@ emulate_syscall(struct x86_emulate_ctxt *ctxt)
 	return 0;
 }
 
+static int
+emulate_sysenter(struct x86_emulate_ctxt *ctxt)
+{
+	struct decode_cache *c = &ctxt->decode;
+	struct kvm_segment cs, ss;
+	u64 msr_data;
+
+	/* inject #UD if LOCK prefix is used */
+	if (c->lock_prefix)
+		return -1;
+
+	/* inject #GP if in real mode or paging is disabled */
+	if (ctxt->mode == X86EMUL_MODE_REAL ||
+		!(ctxt->vcpu->arch.cr0 & X86_CR0_PE)) {
+		kvm_inject_gp(ctxt->vcpu, 0);
+		return -1;
+	}
+
+	/* XXX sysenter/sysexit have not been tested in 64bit mode.
+	* Therefore, we inject an #UD.
+	*/
+	if (ctxt->mode == X86EMUL_MODE_PROT64)
+		return -1;
+
+	setup_syscalls_segments(ctxt, &cs, &ss);
+
+	kvm_x86_ops->get_msr(ctxt->vcpu, MSR_IA32_SYSENTER_CS, &msr_data);
+	switch (ctxt->mode) {
+	case X86EMUL_MODE_PROT32:
+		if ((msr_data & 0xfffc) == 0x0) {
+			kvm_inject_gp(ctxt->vcpu, 0);
+			return -1;
+		}
+		break;
+	case X86EMUL_MODE_PROT64:
+		if (msr_data == 0x0) {
+			kvm_inject_gp(ctxt->vcpu, 0);
+			return -1;
+		}
+		break;
+	}
+
+	ctxt->eflags &= ~(EFLG_VM | EFLG_IF | EFLG_RF);
+	cs.selector = (u16)msr_data;
+	cs.selector &= ~SELECTOR_RPL_MASK;
+	ss.selector = cs.selector + 8;
+	ss.selector &= ~SELECTOR_RPL_MASK;
+	if (ctxt->mode == X86EMUL_MODE_PROT64
+		|| is_long_mode(ctxt->vcpu)) {
+		cs.db = 0;
+		cs.l = 1;
+	}
+
+	kvm_x86_ops->set_segment(ctxt->vcpu, &cs, VCPU_SREG_CS);
+	kvm_x86_ops->set_segment(ctxt->vcpu, &ss, VCPU_SREG_SS);
+
+	kvm_x86_ops->get_msr(ctxt->vcpu, MSR_IA32_SYSENTER_EIP, &msr_data);
+	c->eip = msr_data;
+
+	kvm_x86_ops->get_msr(ctxt->vcpu, MSR_IA32_SYSENTER_ESP, &msr_data);
+	c->regs[VCPU_REGS_RSP] = msr_data;
+
+	return 0;
+}
+
 int
 x86_emulate_insn(struct x86_emulate_ctxt *ctxt, struct x86_emulate_ops *ops)
 {
@@ -2144,7 +2209,10 @@ twobyte_insn:
 		c->dst.type = OP_NONE;
 		break;
 	case 0x34:		/* sysenter */
-		goto cannot_emulate;
+		if (emulate_sysenter(ctxt) == -1)
+			goto cannot_emulate;
+		else
+			goto writeback;
 		break;
 	case 0x35:		/* sysexit */
 		goto cannot_emulate;
-- 
cgit v1.2.3


From 4668f050787015805a7e8ea29cc4f81d8f07cedb Mon Sep 17 00:00:00 2001
From: Andre Przywara <andre.przywara@amd.com>
Date: Thu, 18 Jun 2009 12:56:02 +0200
Subject: KVM: x86 emulator: Add sysexit emulation

Handle #UD intercept of the sysexit instruction in 64bit mode returning to
32bit compat mode on an AMD host.
Setup the segment descriptors for CS and SS and the EIP/ESP registers
according to the manual.

Signed-off-by: Christoph Egger <christoph.egger@amd.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/x86_emulate.c | 72 +++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 71 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/x86_emulate.c b/arch/x86/kvm/x86_emulate.c
index 7a9bddb3ebd..c6663d46f32 100644
--- a/arch/x86/kvm/x86_emulate.c
+++ b/arch/x86/kvm/x86_emulate.c
@@ -1541,6 +1541,73 @@ emulate_sysenter(struct x86_emulate_ctxt *ctxt)
 	return 0;
 }
 
+static int
+emulate_sysexit(struct x86_emulate_ctxt *ctxt)
+{
+	struct decode_cache *c = &ctxt->decode;
+	struct kvm_segment cs, ss;
+	u64 msr_data;
+	int usermode;
+
+	/* inject #UD if LOCK prefix is used */
+	if (c->lock_prefix)
+		return -1;
+
+	/* inject #GP if in real mode or paging is disabled */
+	if (ctxt->mode == X86EMUL_MODE_REAL
+		|| !(ctxt->vcpu->arch.cr0 & X86_CR0_PE)) {
+		kvm_inject_gp(ctxt->vcpu, 0);
+		return -1;
+	}
+
+	/* sysexit must be called from CPL 0 */
+	if (kvm_x86_ops->get_cpl(ctxt->vcpu) != 0) {
+		kvm_inject_gp(ctxt->vcpu, 0);
+		return -1;
+	}
+
+	setup_syscalls_segments(ctxt, &cs, &ss);
+
+	if ((c->rex_prefix & 0x8) != 0x0)
+		usermode = X86EMUL_MODE_PROT64;
+	else
+		usermode = X86EMUL_MODE_PROT32;
+
+	cs.dpl = 3;
+	ss.dpl = 3;
+	kvm_x86_ops->get_msr(ctxt->vcpu, MSR_IA32_SYSENTER_CS, &msr_data);
+	switch (usermode) {
+	case X86EMUL_MODE_PROT32:
+		cs.selector = (u16)(msr_data + 16);
+		if ((msr_data & 0xfffc) == 0x0) {
+			kvm_inject_gp(ctxt->vcpu, 0);
+			return -1;
+		}
+		ss.selector = (u16)(msr_data + 24);
+		break;
+	case X86EMUL_MODE_PROT64:
+		cs.selector = (u16)(msr_data + 32);
+		if (msr_data == 0x0) {
+			kvm_inject_gp(ctxt->vcpu, 0);
+			return -1;
+		}
+		ss.selector = cs.selector + 8;
+		cs.db = 0;
+		cs.l = 1;
+		break;
+	}
+	cs.selector |= SELECTOR_RPL_MASK;
+	ss.selector |= SELECTOR_RPL_MASK;
+
+	kvm_x86_ops->set_segment(ctxt->vcpu, &cs, VCPU_SREG_CS);
+	kvm_x86_ops->set_segment(ctxt->vcpu, &ss, VCPU_SREG_SS);
+
+	c->eip = ctxt->vcpu->arch.regs[VCPU_REGS_RDX];
+	c->regs[VCPU_REGS_RSP] = ctxt->vcpu->arch.regs[VCPU_REGS_RCX];
+
+	return 0;
+}
+
 int
 x86_emulate_insn(struct x86_emulate_ctxt *ctxt, struct x86_emulate_ops *ops)
 {
@@ -2215,7 +2282,10 @@ twobyte_insn:
 			goto writeback;
 		break;
 	case 0x35:		/* sysexit */
-		goto cannot_emulate;
+		if (emulate_sysexit(ctxt) == -1)
+			goto cannot_emulate;
+		else
+			goto writeback;
 		break;
 	case 0x40 ... 0x4f:	/* cmov */
 		c->dst.val = c->dst.orig_val = c->src.val;
-- 
cgit v1.2.3


From ec04b2604c3707a46db1d26d98f82b11d0844669 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Fri, 19 Jun 2009 15:16:23 +0200
Subject: KVM: Prepare memslot data structures for multiple hugepage sizes

[avi: fix build on non-x86]

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/ia64/include/asm/kvm_host.h    |  3 ++-
 arch/powerpc/include/asm/kvm_host.h |  3 ++-
 arch/s390/include/asm/kvm_host.h    |  6 +++++-
 arch/x86/include/asm/kvm_host.h     | 12 ++++++------
 arch/x86/kvm/mmu.c                  | 30 ++++++++++++++++--------------
 arch/x86/kvm/paging_tmpl.h          |  3 ++-
 6 files changed, 33 insertions(+), 24 deletions(-)

(limited to 'arch')

diff --git a/arch/ia64/include/asm/kvm_host.h b/arch/ia64/include/asm/kvm_host.h
index 9cf1c4b1f92..d9b6325a932 100644
--- a/arch/ia64/include/asm/kvm_host.h
+++ b/arch/ia64/include/asm/kvm_host.h
@@ -235,7 +235,8 @@ struct kvm_vm_data {
 #define KVM_REQ_PTC_G		32
 #define KVM_REQ_RESUME		33
 
-#define KVM_PAGES_PER_HPAGE	1
+#define KVM_NR_PAGE_SIZES	1
+#define KVM_PAGES_PER_HPAGE(x)	1
 
 struct kvm;
 struct kvm_vcpu;
diff --git a/arch/powerpc/include/asm/kvm_host.h b/arch/powerpc/include/asm/kvm_host.h
index d4caa6127f5..c9c930ed11d 100644
--- a/arch/powerpc/include/asm/kvm_host.h
+++ b/arch/powerpc/include/asm/kvm_host.h
@@ -34,7 +34,8 @@
 #define KVM_COALESCED_MMIO_PAGE_OFFSET 1
 
 /* We don't currently support large pages. */
-#define KVM_PAGES_PER_HPAGE (1UL << 31)
+#define KVM_NR_PAGE_SIZES	1
+#define KVM_PAGES_PER_HPAGE(x)	(1UL<<31)
 
 struct kvm;
 struct kvm_run;
diff --git a/arch/s390/include/asm/kvm_host.h b/arch/s390/include/asm/kvm_host.h
index 75535d4d7a0..78e07a622b4 100644
--- a/arch/s390/include/asm/kvm_host.h
+++ b/arch/s390/include/asm/kvm_host.h
@@ -40,7 +40,11 @@ struct sca_block {
 	struct sca_entry cpu[64];
 } __attribute__((packed));
 
-#define KVM_PAGES_PER_HPAGE 256
+#define KVM_NR_PAGE_SIZES 2
+#define KVM_HPAGE_SHIFT(x) (PAGE_SHIFT + ((x) - 1) * 8)
+#define KVM_HPAGE_SIZE(x) (1UL << KVM_HPAGE_SHIFT(x))
+#define KVM_HPAGE_MASK(x)	(~(KVM_HPAGE_SIZE(x) - 1))
+#define KVM_PAGES_PER_HPAGE(x)	(KVM_HPAGE_SIZE(x) / PAGE_SIZE)
 
 #define CPUSTAT_HOST       0x80000000
 #define CPUSTAT_WAIT       0x10000000
diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index 19027ab2041..30b625d8e5f 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -54,12 +54,12 @@
 #define INVALID_PAGE (~(hpa_t)0)
 #define UNMAPPED_GVA (~(gpa_t)0)
 
-/* shadow tables are PAE even on non-PAE hosts */
-#define KVM_HPAGE_SHIFT 21
-#define KVM_HPAGE_SIZE (1UL << KVM_HPAGE_SHIFT)
-#define KVM_HPAGE_MASK (~(KVM_HPAGE_SIZE - 1))
-
-#define KVM_PAGES_PER_HPAGE (KVM_HPAGE_SIZE / PAGE_SIZE)
+/* KVM Hugepage definitions for x86 */
+#define KVM_NR_PAGE_SIZES	2
+#define KVM_HPAGE_SHIFT(x)	(PAGE_SHIFT + (((x) - 1) * 9))
+#define KVM_HPAGE_SIZE(x)	(1UL << KVM_HPAGE_SHIFT(x))
+#define KVM_HPAGE_MASK(x)	(~(KVM_HPAGE_SIZE(x) - 1))
+#define KVM_PAGES_PER_HPAGE(x)	(KVM_HPAGE_SIZE(x) / PAGE_SIZE)
 
 #define DE_VECTOR 0
 #define DB_VECTOR 1
diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 12974de88aa..b67585c1ef0 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -394,9 +394,9 @@ static int *slot_largepage_idx(gfn_t gfn, struct kvm_memory_slot *slot)
 {
 	unsigned long idx;
 
-	idx = (gfn / KVM_PAGES_PER_HPAGE) -
-	      (slot->base_gfn / KVM_PAGES_PER_HPAGE);
-	return &slot->lpage_info[idx].write_count;
+	idx = (gfn / KVM_PAGES_PER_HPAGE(PT_DIRECTORY_LEVEL)) -
+	      (slot->base_gfn / KVM_PAGES_PER_HPAGE(PT_DIRECTORY_LEVEL));
+	return &slot->lpage_info[0][idx].write_count;
 }
 
 static void account_shadowed(struct kvm *kvm, gfn_t gfn)
@@ -485,10 +485,10 @@ static unsigned long *gfn_to_rmap(struct kvm *kvm, gfn_t gfn, int lpage)
 	if (!lpage)
 		return &slot->rmap[gfn - slot->base_gfn];
 
-	idx = (gfn / KVM_PAGES_PER_HPAGE) -
-	      (slot->base_gfn / KVM_PAGES_PER_HPAGE);
+	idx = (gfn / KVM_PAGES_PER_HPAGE(PT_DIRECTORY_LEVEL)) -
+	      (slot->base_gfn / KVM_PAGES_PER_HPAGE(PT_DIRECTORY_LEVEL));
 
-	return &slot->lpage_info[idx].rmap_pde;
+	return &slot->lpage_info[0][idx].rmap_pde;
 }
 
 /*
@@ -731,11 +731,11 @@ static int kvm_handle_hva(struct kvm *kvm, unsigned long hva,
 		end = start + (memslot->npages << PAGE_SHIFT);
 		if (hva >= start && hva < end) {
 			gfn_t gfn_offset = (hva - start) >> PAGE_SHIFT;
+			int idx = gfn_offset /
+			          KVM_PAGES_PER_HPAGE(PT_DIRECTORY_LEVEL);
 			retval |= handler(kvm, &memslot->rmap[gfn_offset]);
 			retval |= handler(kvm,
-					  &memslot->lpage_info[
-						  gfn_offset /
-						  KVM_PAGES_PER_HPAGE].rmap_pde);
+					&memslot->lpage_info[0][idx].rmap_pde);
 		}
 	}
 
@@ -1876,8 +1876,9 @@ static int nonpaging_map(struct kvm_vcpu *vcpu, gva_t v, int write, gfn_t gfn)
 	pfn_t pfn;
 	unsigned long mmu_seq;
 
-	if (is_largepage_backed(vcpu, gfn & ~(KVM_PAGES_PER_HPAGE-1))) {
-		gfn &= ~(KVM_PAGES_PER_HPAGE-1);
+	if (is_largepage_backed(vcpu, gfn &
+			~(KVM_PAGES_PER_HPAGE(PT_DIRECTORY_LEVEL) - 1))) {
+		gfn &= ~(KVM_PAGES_PER_HPAGE(PT_DIRECTORY_LEVEL) - 1);
 		largepage = 1;
 	}
 
@@ -2082,8 +2083,9 @@ static int tdp_page_fault(struct kvm_vcpu *vcpu, gva_t gpa,
 	if (r)
 		return r;
 
-	if (is_largepage_backed(vcpu, gfn & ~(KVM_PAGES_PER_HPAGE-1))) {
-		gfn &= ~(KVM_PAGES_PER_HPAGE-1);
+	if (is_largepage_backed(vcpu, gfn &
+			~(KVM_PAGES_PER_HPAGE(PT_DIRECTORY_LEVEL) - 1))) {
+		gfn &= ~(KVM_PAGES_PER_HPAGE(PT_DIRECTORY_LEVEL) - 1);
 		largepage = 1;
 	}
 	mmu_seq = vcpu->kvm->mmu_notifier_seq;
@@ -2485,7 +2487,7 @@ static void mmu_guess_page_from_pte_write(struct kvm_vcpu *vcpu, gpa_t gpa,
 	gfn = (gpte & PT64_BASE_ADDR_MASK) >> PAGE_SHIFT;
 
 	if (is_large_pte(gpte) && is_largepage_backed(vcpu, gfn)) {
-		gfn &= ~(KVM_PAGES_PER_HPAGE-1);
+		gfn &= ~(KVM_PAGES_PER_HPAGE(PT_DIRECTORY_LEVEL) - 1);
 		vcpu->arch.update_pte.largepage = 1;
 	}
 	vcpu->arch.update_pte.mmu_seq = vcpu->kvm->mmu_notifier_seq;
diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h
index 322e8113aee..53e129cec5f 100644
--- a/arch/x86/kvm/paging_tmpl.h
+++ b/arch/x86/kvm/paging_tmpl.h
@@ -401,7 +401,8 @@ static int FNAME(page_fault)(struct kvm_vcpu *vcpu, gva_t addr,
 
 	if (walker.level == PT_DIRECTORY_LEVEL) {
 		gfn_t large_gfn;
-		large_gfn = walker.gfn & ~(KVM_PAGES_PER_HPAGE-1);
+		large_gfn = walker.gfn &
+			~(KVM_PAGES_PER_HPAGE(PT_DIRECTORY_LEVEL) - 1);
 		if (is_largepage_backed(vcpu, large_gfn)) {
 			walker.gfn = large_gfn;
 			largepage = 1;
-- 
cgit v1.2.3


From 894a9c5543abf6f88d36dc1b9f5d90f35db09cb3 Mon Sep 17 00:00:00 2001
From: Marcelo Tosatti <mtosatti@redhat.com>
Date: Tue, 23 Jun 2009 15:05:14 -0300
Subject: KVM: x86: missing locking in PIT/IRQCHIP/SET_BSP_CPU ioctl paths

Correct missing locking in a few places in x86's vm_ioctl handling path.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/i8254.c |  2 --
 arch/x86/kvm/x86.c   | 12 ++++++++++++
 2 files changed, 12 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/i8254.c b/arch/x86/kvm/i8254.c
index 15fc95b2fc0..bcd00c76d69 100644
--- a/arch/x86/kvm/i8254.c
+++ b/arch/x86/kvm/i8254.c
@@ -345,9 +345,7 @@ static void pit_load_count(struct kvm *kvm, int channel, u32 val)
 
 void kvm_pit_load_count(struct kvm *kvm, int channel, u32 val)
 {
-	mutex_lock(&kvm->arch.vpit->pit_state.lock);
 	pit_load_count(kvm, channel, val);
-	mutex_unlock(&kvm->arch.vpit->pit_state.lock);
 }
 
 static inline struct kvm_pit *dev_to_pit(struct kvm_io_device *dev)
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 57e76b37242..e9b0982d258 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -1987,19 +1987,25 @@ static int kvm_vm_ioctl_set_irqchip(struct kvm *kvm, struct kvm_irqchip *chip)
 	r = 0;
 	switch (chip->chip_id) {
 	case KVM_IRQCHIP_PIC_MASTER:
+		spin_lock(&pic_irqchip(kvm)->lock);
 		memcpy(&pic_irqchip(kvm)->pics[0],
 			&chip->chip.pic,
 			sizeof(struct kvm_pic_state));
+		spin_unlock(&pic_irqchip(kvm)->lock);
 		break;
 	case KVM_IRQCHIP_PIC_SLAVE:
+		spin_lock(&pic_irqchip(kvm)->lock);
 		memcpy(&pic_irqchip(kvm)->pics[1],
 			&chip->chip.pic,
 			sizeof(struct kvm_pic_state));
+		spin_unlock(&pic_irqchip(kvm)->lock);
 		break;
 	case KVM_IRQCHIP_IOAPIC:
+		mutex_lock(&kvm->irq_lock);
 		memcpy(ioapic_irqchip(kvm),
 			&chip->chip.ioapic,
 			sizeof(struct kvm_ioapic_state));
+		mutex_unlock(&kvm->irq_lock);
 		break;
 	default:
 		r = -EINVAL;
@@ -2013,7 +2019,9 @@ static int kvm_vm_ioctl_get_pit(struct kvm *kvm, struct kvm_pit_state *ps)
 {
 	int r = 0;
 
+	mutex_lock(&kvm->arch.vpit->pit_state.lock);
 	memcpy(ps, &kvm->arch.vpit->pit_state, sizeof(struct kvm_pit_state));
+	mutex_unlock(&kvm->arch.vpit->pit_state.lock);
 	return r;
 }
 
@@ -2021,8 +2029,10 @@ static int kvm_vm_ioctl_set_pit(struct kvm *kvm, struct kvm_pit_state *ps)
 {
 	int r = 0;
 
+	mutex_lock(&kvm->arch.vpit->pit_state.lock);
 	memcpy(&kvm->arch.vpit->pit_state, ps, sizeof(struct kvm_pit_state));
 	kvm_pit_load_count(kvm, 0, ps->channels[0].count);
+	mutex_unlock(&kvm->arch.vpit->pit_state.lock);
 	return r;
 }
 
@@ -2031,7 +2041,9 @@ static int kvm_vm_ioctl_reinject(struct kvm *kvm,
 {
 	if (!kvm->arch.vpit)
 		return -ENXIO;
+	mutex_lock(&kvm->arch.vpit->pit_state.lock);
 	kvm->arch.vpit->pit_state.pit_timer.reinject = control->pit_reinject;
+	mutex_unlock(&kvm->arch.vpit->pit_state.lock);
 	return 0;
 }
 
-- 
cgit v1.2.3


From 8f1589d95e5eab1ed287f217a33656e922cdbdd0 Mon Sep 17 00:00:00 2001
From: Andre Przywara <andre.przywara@amd.com>
Date: Wed, 24 Jun 2009 12:44:33 +0200
Subject: KVM: ignore AMDs HWCR register access to set the FFDIS bit

Linux tries to disable the flush filter on all AMD K8 CPUs. Since KVM
does not handle the needed MSR, the injected #GP will panic the Linux
kernel. Ignore setting of the HWCR.FFDIS bit in this MSR to let Linux
boot with an AMD K8 family guest CPU.

Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/svm.c | 1 -
 arch/x86/kvm/x86.c | 8 ++++++++
 2 files changed, 8 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index b1c44620886..8728e514c85 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -2137,7 +2137,6 @@ static int svm_set_msr(struct kvm_vcpu *vcpu, unsigned ecx, u64 data)
 		break;
 	case MSR_VM_CR:
 	case MSR_VM_IGNNE:
-	case MSR_K7_HWCR:
 		pr_unimpl(vcpu, "unimplemented wrmsr: 0x%x data 0x%llx\n", ecx, data);
 		break;
 	default:
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index e9b0982d258..cae5b12bf93 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -833,6 +833,14 @@ int kvm_set_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 data)
 	case MSR_EFER:
 		set_efer(vcpu, data);
 		break;
+	case MSR_K7_HWCR:
+		data &= ~(u64)0x40;	/* ignore flush filter disable */
+		if (data != 0) {
+			pr_unimpl(vcpu, "unimplemented HWCR wrmsr: 0x%llx\n",
+				data);
+			return 1;
+		}
+		break;
 	case MSR_IA32_DEBUGCTLMSR:
 		if (!data) {
 			/* We support the non-activated case already */
-- 
cgit v1.2.3


From 1fdbd48c242db996107f72ae4140ffe8163e26a8 Mon Sep 17 00:00:00 2001
From: Andre Przywara <andre.przywara@amd.com>
Date: Wed, 24 Jun 2009 12:44:34 +0200
Subject: KVM: ignore reads from AMDs C1E enabled MSR

If the Linux kernel detects an C1E capable AMD processor (K8 RevF and
higher), it will access a certain MSR on every attempt to go to halt.
Explicitly handle this read and return 0 to let KVM run a Linux guest
with the native AMD host CPU propagated to the guest.

Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/x86.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index cae5b12bf93..6aace61fdb6 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -1038,6 +1038,7 @@ int kvm_get_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata)
 	case MSR_P6_EVNTSEL0:
 	case MSR_P6_EVNTSEL1:
 	case MSR_K7_EVNTSEL0:
+	case MSR_K8_INT_PENDING_MSG:
 		data = 0;
 		break;
 	case MSR_MTRRcap:
-- 
cgit v1.2.3


From ed85c0685321a139cefd6622b21467643f0159e1 Mon Sep 17 00:00:00 2001
From: Andre Przywara <andre.przywara@amd.com>
Date: Thu, 25 Jun 2009 12:36:49 +0200
Subject: KVM: introduce module parameter for ignoring unknown MSRs accesses

KVM will inject a #GP into the guest if that tries to access unhandled
MSRs. This will crash many guests. Although it would be the correct
way to actually handle these MSRs, we introduce a runtime switchable
module param called "ignore_msrs" (defaults to 0). If this is Y, unknown
MSR reads will return 0, while MSR writes are simply dropped. In both cases
we print a message to dmesg to inform the user about that.

You can change the behaviour at any time by saying:

 # echo 1 > /sys/modules/kvm/parameters/ignore_msrs

Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/x86.c | 24 ++++++++++++++++++++----
 1 file changed, 20 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 6aace61fdb6..0be75d53b7f 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -83,6 +83,9 @@ struct kvm_cpuid_entry2 *kvm_find_cpuid_entry(struct kvm_vcpu *vcpu,
 struct kvm_x86_ops *kvm_x86_ops;
 EXPORT_SYMBOL_GPL(kvm_x86_ops);
 
+int ignore_msrs = 0;
+module_param_named(ignore_msrs, ignore_msrs, bool, S_IRUGO | S_IWUSR);
+
 struct kvm_stats_debugfs_item debugfs_entries[] = {
 	{ "pf_fixed", VCPU_STAT(pf_fixed) },
 	{ "pf_guest", VCPU_STAT(pf_guest) },
@@ -930,8 +933,15 @@ int kvm_set_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 data)
 			"0x%x data 0x%llx\n", msr, data);
 		break;
 	default:
-		pr_unimpl(vcpu, "unhandled wrmsr: 0x%x data %llx\n", msr, data);
-		return 1;
+		if (!ignore_msrs) {
+			pr_unimpl(vcpu, "unhandled wrmsr: 0x%x data %llx\n",
+				msr, data);
+			return 1;
+		} else {
+			pr_unimpl(vcpu, "ignored wrmsr: 0x%x data %llx\n",
+				msr, data);
+			break;
+		}
 	}
 	return 0;
 }
@@ -1078,8 +1088,14 @@ int kvm_get_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata)
 	case MSR_IA32_MC0_CTL ... MSR_IA32_MC0_CTL + 4 * KVM_MAX_MCE_BANKS - 1:
 		return get_msr_mce(vcpu, msr, pdata);
 	default:
-		pr_unimpl(vcpu, "unhandled rdmsr: 0x%x\n", msr);
-		return 1;
+		if (!ignore_msrs) {
+			pr_unimpl(vcpu, "unhandled rdmsr: 0x%x\n", msr);
+			return 1;
+		} else {
+			pr_unimpl(vcpu, "ignored rdmsr: 0x%x\n", msr);
+			data = 0;
+		}
+		break;
 	}
 	*pdata = data;
 	return 0;
-- 
cgit v1.2.3


From 46f43c6ee022c3aeb9686b104234b9f27fac03c2 Mon Sep 17 00:00:00 2001
From: Marcelo Tosatti <mtosatti@redhat.com>
Date: Thu, 18 Jun 2009 11:47:27 -0300
Subject: KVM: powerpc: convert marker probes to event trace

[avi: make it build]
[avi: fold trace-arch.h into trace.h]

CC: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/powerpc/kvm/44x_tlb.c  |  11 ++---
 arch/powerpc/kvm/Makefile   |   4 ++
 arch/powerpc/kvm/e500_tlb.c |  16 +++----
 arch/powerpc/kvm/emulate.c  |   3 +-
 arch/powerpc/kvm/powerpc.c  |   3 ++
 arch/powerpc/kvm/trace.h    | 104 ++++++++++++++++++++++++++++++++++++++++++++
 6 files changed, 126 insertions(+), 15 deletions(-)
 create mode 100644 arch/powerpc/kvm/trace.h

(limited to 'arch')

diff --git a/arch/powerpc/kvm/44x_tlb.c b/arch/powerpc/kvm/44x_tlb.c
index 4a16f472cc1..ff3cb63b811 100644
--- a/arch/powerpc/kvm/44x_tlb.c
+++ b/arch/powerpc/kvm/44x_tlb.c
@@ -30,6 +30,7 @@
 #include "timing.h"
 
 #include "44x_tlb.h"
+#include "trace.h"
 
 #ifndef PPC44x_TLBE_SIZE
 #define PPC44x_TLBE_SIZE	PPC44x_TLB_4K
@@ -263,7 +264,7 @@ static void kvmppc_44x_shadow_release(struct kvmppc_vcpu_44x *vcpu_44x,
 
 	/* XXX set tlb_44x_index to stlb_index? */
 
-	KVMTRACE_1D(STLB_INVAL, &vcpu_44x->vcpu, stlb_index, handler);
+	trace_kvm_stlb_inval(stlb_index);
 }
 
 void kvmppc_mmu_destroy(struct kvm_vcpu *vcpu)
@@ -365,8 +366,8 @@ void kvmppc_mmu_map(struct kvm_vcpu *vcpu, u64 gvaddr, gpa_t gpaddr,
 	/* Insert shadow mapping into hardware TLB. */
 	kvmppc_44x_tlbe_set_modified(vcpu_44x, victim);
 	kvmppc_44x_tlbwe(victim, &stlbe);
-	KVMTRACE_5D(STLB_WRITE, vcpu, victim, stlbe.tid, stlbe.word0, stlbe.word1,
-	            stlbe.word2, handler);
+	trace_kvm_stlb_write(victim, stlbe.tid, stlbe.word0, stlbe.word1,
+			     stlbe.word2);
 }
 
 /* For a particular guest TLB entry, invalidate the corresponding host TLB
@@ -485,8 +486,8 @@ int kvmppc_44x_emul_tlbwe(struct kvm_vcpu *vcpu, u8 ra, u8 rs, u8 ws)
 		kvmppc_mmu_map(vcpu, eaddr, gpaddr, gtlb_index);
 	}
 
-	KVMTRACE_5D(GTLB_WRITE, vcpu, gtlb_index, tlbe->tid, tlbe->word0,
-	            tlbe->word1, tlbe->word2, handler);
+	trace_kvm_gtlb_write(gtlb_index, tlbe->tid, tlbe->word0, tlbe->word1,
+			     tlbe->word2);
 
 	kvmppc_set_exit_type(vcpu, EMULATED_TLBWE_EXITS);
 	return EMULATE_DONE;
diff --git a/arch/powerpc/kvm/Makefile b/arch/powerpc/kvm/Makefile
index 459c7ee580f..4f407f2662f 100644
--- a/arch/powerpc/kvm/Makefile
+++ b/arch/powerpc/kvm/Makefile
@@ -10,6 +10,10 @@ common-objs-y = $(addprefix ../../../virt/kvm/, kvm_main.o coalesced_mmio.o)
 
 common-objs-$(CONFIG_KVM_TRACE)  += $(addprefix ../../../virt/kvm/, kvm_trace.o)
 
+CFLAGS_44x_tlb.o  := -I.
+CFLAGS_e500_tlb.o := -I.
+CFLAGS_emulate.o  := -I.
+
 kvm-objs := $(common-objs-y) powerpc.o emulate.o
 obj-$(CONFIG_KVM_EXIT_TIMING) += timing.o
 obj-$(CONFIG_KVM) += kvm.o
diff --git a/arch/powerpc/kvm/e500_tlb.c b/arch/powerpc/kvm/e500_tlb.c
index a2048ac095a..fb1e1dc11ba 100644
--- a/arch/powerpc/kvm/e500_tlb.c
+++ b/arch/powerpc/kvm/e500_tlb.c
@@ -22,6 +22,7 @@
 
 #include "../mm/mmu_decl.h"
 #include "e500_tlb.h"
+#include "trace.h"
 
 #define to_htlb1_esel(esel) (tlb1_entry_num - (esel) - 1)
 
@@ -224,9 +225,8 @@ static void kvmppc_e500_stlbe_invalidate(struct kvmppc_vcpu_e500 *vcpu_e500,
 
 	kvmppc_e500_shadow_release(vcpu_e500, tlbsel, esel);
 	stlbe->mas1 = 0;
-	KVMTRACE_5D(STLB_INVAL, &vcpu_e500->vcpu, index_of(tlbsel, esel),
-			stlbe->mas1, stlbe->mas2, stlbe->mas3, stlbe->mas7,
-			handler);
+	trace_kvm_stlb_inval(index_of(tlbsel, esel), stlbe->mas1, stlbe->mas2,
+			     stlbe->mas3, stlbe->mas7);
 }
 
 static void kvmppc_e500_tlb1_invalidate(struct kvmppc_vcpu_e500 *vcpu_e500,
@@ -319,9 +319,8 @@ static inline void kvmppc_e500_shadow_map(struct kvmppc_vcpu_e500 *vcpu_e500,
 				vcpu_e500->vcpu.arch.msr & MSR_PR);
 	stlbe->mas7 = (hpaddr >> 32) & MAS7_RPN;
 
-	KVMTRACE_5D(STLB_WRITE, &vcpu_e500->vcpu, index_of(tlbsel, esel),
-			stlbe->mas1, stlbe->mas2, stlbe->mas3, stlbe->mas7,
-			handler);
+	trace_kvm_stlb_write(index_of(tlbsel, esel), stlbe->mas1, stlbe->mas2,
+			     stlbe->mas3, stlbe->mas7);
 }
 
 /* XXX only map the one-one case, for now use TLB0 */
@@ -535,9 +534,8 @@ int kvmppc_e500_emul_tlbwe(struct kvm_vcpu *vcpu)
 	gtlbe->mas3 = vcpu_e500->mas3;
 	gtlbe->mas7 = vcpu_e500->mas7;
 
-	KVMTRACE_5D(GTLB_WRITE, vcpu, vcpu_e500->mas0,
-			gtlbe->mas1, gtlbe->mas2, gtlbe->mas3, gtlbe->mas7,
-			handler);
+	trace_kvm_gtlb_write(vcpu_e500->mas0, gtlbe->mas1, gtlbe->mas2,
+			     gtlbe->mas3, gtlbe->mas7);
 
 	/* Invalidate shadow mappings for the about-to-be-clobbered TLBE. */
 	if (tlbe_is_host_safe(vcpu, gtlbe)) {
diff --git a/arch/powerpc/kvm/emulate.c b/arch/powerpc/kvm/emulate.c
index 28a8237fe78..7737146af3f 100644
--- a/arch/powerpc/kvm/emulate.c
+++ b/arch/powerpc/kvm/emulate.c
@@ -29,6 +29,7 @@
 #include <asm/kvm_ppc.h>
 #include <asm/disassemble.h>
 #include "timing.h"
+#include "trace.h"
 
 #define OP_TRAP 3
 
@@ -419,7 +420,7 @@ int kvmppc_emulate_instruction(struct kvm_run *run, struct kvm_vcpu *vcpu)
 		}
 	}
 
-	KVMTRACE_3D(PPC_INSTR, vcpu, inst, (int)vcpu->arch.pc, emulated, entryexit);
+	trace_kvm_ppc_instr(inst, vcpu->arch.pc, emulated);
 
 	if (advance)
 		vcpu->arch.pc += 4; /* Advance past emulated instruction. */
diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c
index 7ad30e0a1b9..0341391eff1 100644
--- a/arch/powerpc/kvm/powerpc.c
+++ b/arch/powerpc/kvm/powerpc.c
@@ -31,6 +31,9 @@
 #include "timing.h"
 #include "../mm/mmu_decl.h"
 
+#define CREATE_TRACE_POINTS
+#include "trace.h"
+
 gfn_t unalias_gfn(struct kvm *kvm, gfn_t gfn)
 {
 	return gfn;
diff --git a/arch/powerpc/kvm/trace.h b/arch/powerpc/kvm/trace.h
new file mode 100644
index 00000000000..67f219de045
--- /dev/null
+++ b/arch/powerpc/kvm/trace.h
@@ -0,0 +1,104 @@
+#if !defined(_TRACE_KVM_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_KVM_H
+
+#include <linux/tracepoint.h>
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM kvm
+#define TRACE_INCLUDE_PATH .
+#define TRACE_INCLUDE_FILE trace
+
+/*
+ * Tracepoint for guest mode entry.
+ */
+TRACE_EVENT(kvm_ppc_instr,
+	TP_PROTO(unsigned int inst, unsigned long pc, unsigned int emulate),
+	TP_ARGS(inst, pc, emulate),
+
+	TP_STRUCT__entry(
+		__field(	unsigned int,	inst		)
+		__field(	unsigned long,	pc		)
+		__field(	unsigned int,	emulate		)
+	),
+
+	TP_fast_assign(
+		__entry->inst		= inst;
+		__entry->pc		= pc;
+		__entry->emulate	= emulate;
+	),
+
+	TP_printk("inst %u pc 0x%lx emulate %u\n",
+		  __entry->inst, __entry->pc, __entry->emulate)
+);
+
+TRACE_EVENT(kvm_stlb_inval,
+	TP_PROTO(unsigned int stlb_index),
+	TP_ARGS(stlb_index),
+
+	TP_STRUCT__entry(
+		__field(	unsigned int,	stlb_index	)
+	),
+
+	TP_fast_assign(
+		__entry->stlb_index	= stlb_index;
+	),
+
+	TP_printk("stlb_index %u", __entry->stlb_index)
+);
+
+TRACE_EVENT(kvm_stlb_write,
+	TP_PROTO(unsigned int victim, unsigned int tid, unsigned int word0,
+		 unsigned int word1, unsigned int word2),
+	TP_ARGS(victim, tid, word0, word1, word2),
+
+	TP_STRUCT__entry(
+		__field(	unsigned int,	victim		)
+		__field(	unsigned int,	tid		)
+		__field(	unsigned int,	word0		)
+		__field(	unsigned int,	word1		)
+		__field(	unsigned int,	word2		)
+	),
+
+	TP_fast_assign(
+		__entry->victim		= victim;
+		__entry->tid		= tid;
+		__entry->word0		= word0;
+		__entry->word1		= word1;
+		__entry->word2		= word2;
+	),
+
+	TP_printk("victim %u tid %u w0 %u w1 %u w2 %u",
+		__entry->victim, __entry->tid, __entry->word0,
+		__entry->word1, __entry->word2)
+);
+
+TRACE_EVENT(kvm_gtlb_write,
+	TP_PROTO(unsigned int gtlb_index, unsigned int tid, unsigned int word0,
+		 unsigned int word1, unsigned int word2),
+	TP_ARGS(gtlb_index, tid, word0, word1, word2),
+
+	TP_STRUCT__entry(
+		__field(	unsigned int,	gtlb_index	)
+		__field(	unsigned int,	tid		)
+		__field(	unsigned int,	word0		)
+		__field(	unsigned int,	word1		)
+		__field(	unsigned int,	word2		)
+	),
+
+	TP_fast_assign(
+		__entry->gtlb_index	= gtlb_index;
+		__entry->tid		= tid;
+		__entry->word0		= word0;
+		__entry->word1		= word1;
+		__entry->word2		= word2;
+	),
+
+	TP_printk("gtlb_index %u tid %u w0 %u w1 %u w2 %u",
+		__entry->gtlb_index, __entry->tid, __entry->word0,
+		__entry->word1, __entry->word2)
+);
+
+#endif /* _TRACE_KVM_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
-- 
cgit v1.2.3


From 2023a29cbe34139afcea8f65f8aef78c325c5dc0 Mon Sep 17 00:00:00 2001
From: Marcelo Tosatti <mtosatti@redhat.com>
Date: Thu, 18 Jun 2009 11:47:28 -0300
Subject: KVM: remove old KVMTRACE support code

Return EOPNOTSUPP for KVM_TRACE_ENABLE/PAUSE/DISABLE ioctls.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/ia64/kvm/Kconfig     |  3 ---
 arch/powerpc/kvm/Kconfig  | 11 -----------
 arch/powerpc/kvm/Makefile |  2 --
 arch/s390/kvm/Kconfig     |  3 ---
 arch/x86/kvm/Kconfig      | 12 ------------
 arch/x86/kvm/Makefile     |  1 -
 6 files changed, 32 deletions(-)

(limited to 'arch')

diff --git a/arch/ia64/kvm/Kconfig b/arch/ia64/kvm/Kconfig
index cbadd8a6523..ef3e7be29ca 100644
--- a/arch/ia64/kvm/Kconfig
+++ b/arch/ia64/kvm/Kconfig
@@ -47,9 +47,6 @@ config KVM_INTEL
 	  Provides support for KVM on Itanium 2 processors equipped with the VT
 	  extensions.
 
-config KVM_TRACE
-       bool
-
 source drivers/virtio/Kconfig
 
 endif # VIRTUALIZATION
diff --git a/arch/powerpc/kvm/Kconfig b/arch/powerpc/kvm/Kconfig
index 46019dccce1..c2992684661 100644
--- a/arch/powerpc/kvm/Kconfig
+++ b/arch/powerpc/kvm/Kconfig
@@ -58,17 +58,6 @@ config KVM_E500
 
 	  If unsure, say N.
 
-config KVM_TRACE
-	bool "KVM trace support"
-	depends on KVM && MARKERS && SYSFS
-	select RELAY
-	select DEBUG_FS
-	default n
-	---help---
-	  This option allows reading a trace of kvm-related events through
-	  relayfs.  Note the ABI is not considered stable and will be
-	  modified in future updates.
-
 source drivers/virtio/Kconfig
 
 endif # VIRTUALIZATION
diff --git a/arch/powerpc/kvm/Makefile b/arch/powerpc/kvm/Makefile
index 4f407f2662f..37655fe19f2 100644
--- a/arch/powerpc/kvm/Makefile
+++ b/arch/powerpc/kvm/Makefile
@@ -8,8 +8,6 @@ EXTRA_CFLAGS += -Ivirt/kvm -Iarch/powerpc/kvm
 
 common-objs-y = $(addprefix ../../../virt/kvm/, kvm_main.o coalesced_mmio.o)
 
-common-objs-$(CONFIG_KVM_TRACE)  += $(addprefix ../../../virt/kvm/, kvm_trace.o)
-
 CFLAGS_44x_tlb.o  := -I.
 CFLAGS_e500_tlb.o := -I.
 CFLAGS_emulate.o  := -I.
diff --git a/arch/s390/kvm/Kconfig b/arch/s390/kvm/Kconfig
index ad75ce33be1..bf164fc2186 100644
--- a/arch/s390/kvm/Kconfig
+++ b/arch/s390/kvm/Kconfig
@@ -34,9 +34,6 @@ config KVM
 
 	  If unsure, say N.
 
-config KVM_TRACE
-       bool
-
 # OK, it's a little counter-intuitive to do this, but it puts it neatly under
 # the virtualization menu.
 source drivers/virtio/Kconfig
diff --git a/arch/x86/kvm/Kconfig b/arch/x86/kvm/Kconfig
index 7fbedfd34d6..b84e571f417 100644
--- a/arch/x86/kvm/Kconfig
+++ b/arch/x86/kvm/Kconfig
@@ -62,18 +62,6 @@ config KVM_AMD
 	  To compile this as a module, choose M here: the module
 	  will be called kvm-amd.
 
-config KVM_TRACE
-	bool "KVM trace support"
-	depends on KVM && SYSFS
-	select MARKERS
-	select RELAY
-	select DEBUG_FS
-	default n
-	---help---
-	  This option allows reading a trace of kvm-related events through
-	  relayfs.  Note the ABI is not considered stable and will be
-	  modified in future updates.
-
 # OK, it's a little counter-intuitive to do this, but it puts it neatly under
 # the virtualization menu.
 source drivers/lguest/Kconfig
diff --git a/arch/x86/kvm/Makefile b/arch/x86/kvm/Makefile
index 7c56850b82c..afaaa7627d9 100644
--- a/arch/x86/kvm/Makefile
+++ b/arch/x86/kvm/Makefile
@@ -7,7 +7,6 @@ CFLAGS_vmx.o := -I.
 
 kvm-y			+= $(addprefix ../../../virt/kvm/, kvm_main.o ioapic.o \
 				coalesced_mmio.o irq_comm.o eventfd.o)
-kvm-$(CONFIG_KVM_TRACE)	+= $(addprefix ../../../virt/kvm/, kvm_trace.o)
 kvm-$(CONFIG_IOMMU_API)	+= $(addprefix ../../../virt/kvm/, iommu.o)
 
 kvm-y			+= x86.o mmu.o x86_emulate.o i8259.o irq.o lapic.o \
-- 
cgit v1.2.3


From 108b56690f35e083c5559116d6656f59a557a815 Mon Sep 17 00:00:00 2001
From: "Michael S. Tsirkin" <mst@redhat.com>
Date: Mon, 29 Jun 2009 22:24:21 +0300
Subject: KVM: switch pit creation to slots_lock

switch pit creation to slots_lock. slots_lock is already taken for read
everywhere, so we only need to take it for write when creating pit.
This is in preparation to removing in_range and kvm->lock around it.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/x86.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 0be75d53b7f..7ce6367c197 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -2188,7 +2188,7 @@ long kvm_arch_vm_ioctl(struct file *filp,
 				   sizeof(struct kvm_pit_config)))
 			goto out;
 	create_pit:
-		mutex_lock(&kvm->lock);
+		down_write(&kvm->slots_lock);
 		r = -EEXIST;
 		if (kvm->arch.vpit)
 			goto create_pit_unlock;
@@ -2197,7 +2197,7 @@ long kvm_arch_vm_ioctl(struct file *filp,
 		if (kvm->arch.vpit)
 			r = 0;
 	create_pit_unlock:
-		mutex_unlock(&kvm->lock);
+		up_write(&kvm->slots_lock);
 		break;
 	case KVM_IRQ_LINE_STATUS:
 	case KVM_IRQ_LINE: {
-- 
cgit v1.2.3


From 6c474694530f377507f9aca438c17206e051e6e7 Mon Sep 17 00:00:00 2001
From: "Michael S. Tsirkin" <mst@redhat.com>
Date: Mon, 29 Jun 2009 22:24:26 +0300
Subject: KVM: convert bus to slots_lock

Use slots_lock to protect device list on the bus.  slots_lock is already
taken for read everywhere, so we only need to take it for write when
registering devices.  This is in preparation to removing in_range and
kvm->lock around it.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/i8254.c | 5 +++--
 arch/x86/kvm/i8259.c | 2 +-
 2 files changed, 4 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/i8254.c b/arch/x86/kvm/i8254.c
index bcd00c76d69..4082cdd468e 100644
--- a/arch/x86/kvm/i8254.c
+++ b/arch/x86/kvm/i8254.c
@@ -583,6 +583,7 @@ static const struct kvm_io_device_ops speaker_dev_ops = {
 	.in_range = speaker_in_range,
 };
 
+/* Caller must have writers lock on slots_lock */
 struct kvm_pit *kvm_create_pit(struct kvm *kvm, u32 flags)
 {
 	struct kvm_pit *pit;
@@ -621,11 +622,11 @@ struct kvm_pit *kvm_create_pit(struct kvm *kvm, u32 flags)
 	kvm_register_irq_mask_notifier(kvm, 0, &pit->mask_notifier);
 
 	kvm_iodevice_init(&pit->dev, &pit_dev_ops);
-	kvm_io_bus_register_dev(&kvm->pio_bus, &pit->dev);
+	__kvm_io_bus_register_dev(&kvm->pio_bus, &pit->dev);
 
 	if (flags & KVM_PIT_SPEAKER_DUMMY) {
 		kvm_iodevice_init(&pit->speaker_dev, &speaker_dev_ops);
-		kvm_io_bus_register_dev(&kvm->pio_bus, &pit->speaker_dev);
+		__kvm_io_bus_register_dev(&kvm->pio_bus, &pit->speaker_dev);
 	}
 
 	return pit;
diff --git a/arch/x86/kvm/i8259.c b/arch/x86/kvm/i8259.c
index 148c52a608d..1851aec8a7d 100644
--- a/arch/x86/kvm/i8259.c
+++ b/arch/x86/kvm/i8259.c
@@ -548,6 +548,6 @@ struct kvm_pic *kvm_create_pic(struct kvm *kvm)
 	 * Initialize PIO device
 	 */
 	kvm_iodevice_init(&s->dev, &picdev_ops);
-	kvm_io_bus_register_dev(&kvm->pio_bus, &s->dev);
+	kvm_io_bus_register_dev(kvm, &kvm->pio_bus, &s->dev);
 	return s;
 }
-- 
cgit v1.2.3


From bda9020e2463ec94db9f97e8615f3bae22069838 Mon Sep 17 00:00:00 2001
From: "Michael S. Tsirkin" <mst@redhat.com>
Date: Mon, 29 Jun 2009 22:24:32 +0300
Subject: KVM: remove in_range from io devices

This changes bus accesses to use high-level kvm_io_bus_read/kvm_io_bus_write
functions. in_range now becomes unused so it is removed from device ops in
favor of read/write callbacks performing range checks internally.

This allows aliasing (mostly for in-kernel virtio), as well as better error
handling by making it possible to pass errors up to userspace.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/ia64/kvm/kvm-ia64.c |  28 ++++--------
 arch/x86/kvm/i8254.c     |  49 +++++++++++----------
 arch/x86/kvm/i8259.c     |  20 +++++----
 arch/x86/kvm/lapic.c     |  44 +++++++++----------
 arch/x86/kvm/x86.c       | 110 ++++++++++++++---------------------------------
 5 files changed, 98 insertions(+), 153 deletions(-)

(limited to 'arch')

diff --git a/arch/ia64/kvm/kvm-ia64.c b/arch/ia64/kvm/kvm-ia64.c
index 5c766bd82b0..d7aa6bb8f47 100644
--- a/arch/ia64/kvm/kvm-ia64.c
+++ b/arch/ia64/kvm/kvm-ia64.c
@@ -210,16 +210,6 @@ int kvm_dev_ioctl_check_extension(long ext)
 
 }
 
-static struct kvm_io_device *vcpu_find_mmio_dev(struct kvm_vcpu *vcpu,
-					gpa_t addr, int len, int is_write)
-{
-	struct kvm_io_device *dev;
-
-	dev = kvm_io_bus_find_dev(&vcpu->kvm->mmio_bus, addr, len, is_write);
-
-	return dev;
-}
-
 static int handle_vm_error(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 {
 	kvm_run->exit_reason = KVM_EXIT_UNKNOWN;
@@ -231,6 +221,7 @@ static int handle_mmio(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 {
 	struct kvm_mmio_req *p;
 	struct kvm_io_device *mmio_dev;
+	int r;
 
 	p = kvm_get_vcpu_ioreq(vcpu);
 
@@ -247,16 +238,13 @@ static int handle_mmio(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	kvm_run->exit_reason = KVM_EXIT_MMIO;
 	return 0;
 mmio:
-	mmio_dev = vcpu_find_mmio_dev(vcpu, p->addr, p->size, !p->dir);
-	if (mmio_dev) {
-		if (!p->dir)
-			kvm_iodevice_write(mmio_dev, p->addr, p->size,
-						&p->data);
-		else
-			kvm_iodevice_read(mmio_dev, p->addr, p->size,
-						&p->data);
-
-	} else
+	if (p->dir)
+		r = kvm_io_bus_read(&vcpu->kvm->mmio_bus, p->addr,
+				    p->size, &p->data);
+	else
+		r = kvm_io_bus_write(&vcpu->kvm->mmio_bus, p->addr,
+				     p->size, &p->data);
+	if (r)
 		printk(KERN_ERR"kvm: No iodevice found! addr:%lx\n", p->addr);
 	p->state = STATE_IORESP_READY;
 
diff --git a/arch/x86/kvm/i8254.c b/arch/x86/kvm/i8254.c
index 4082cdd468e..8c3ac30ef9b 100644
--- a/arch/x86/kvm/i8254.c
+++ b/arch/x86/kvm/i8254.c
@@ -358,8 +358,14 @@ static inline struct kvm_pit *speaker_to_pit(struct kvm_io_device *dev)
 	return container_of(dev, struct kvm_pit, speaker_dev);
 }
 
-static void pit_ioport_write(struct kvm_io_device *this,
-			     gpa_t addr, int len, const void *data)
+static inline int pit_in_range(gpa_t addr)
+{
+	return ((addr >= KVM_PIT_BASE_ADDRESS) &&
+		(addr < KVM_PIT_BASE_ADDRESS + KVM_PIT_MEM_LENGTH));
+}
+
+static int pit_ioport_write(struct kvm_io_device *this,
+			    gpa_t addr, int len, const void *data)
 {
 	struct kvm_pit *pit = dev_to_pit(this);
 	struct kvm_kpit_state *pit_state = &pit->pit_state;
@@ -367,6 +373,8 @@ static void pit_ioport_write(struct kvm_io_device *this,
 	int channel, access;
 	struct kvm_kpit_channel_state *s;
 	u32 val = *(u32 *) data;
+	if (!pit_in_range(addr))
+		return -EOPNOTSUPP;
 
 	val  &= 0xff;
 	addr &= KVM_PIT_CHANNEL_MASK;
@@ -429,16 +437,19 @@ static void pit_ioport_write(struct kvm_io_device *this,
 	}
 
 	mutex_unlock(&pit_state->lock);
+	return 0;
 }
 
-static void pit_ioport_read(struct kvm_io_device *this,
-			    gpa_t addr, int len, void *data)
+static int pit_ioport_read(struct kvm_io_device *this,
+			   gpa_t addr, int len, void *data)
 {
 	struct kvm_pit *pit = dev_to_pit(this);
 	struct kvm_kpit_state *pit_state = &pit->pit_state;
 	struct kvm *kvm = pit->kvm;
 	int ret, count;
 	struct kvm_kpit_channel_state *s;
+	if (!pit_in_range(addr))
+		return -EOPNOTSUPP;
 
 	addr &= KVM_PIT_CHANNEL_MASK;
 	s = &pit_state->channels[addr];
@@ -493,37 +504,36 @@ static void pit_ioport_read(struct kvm_io_device *this,
 	memcpy(data, (char *)&ret, len);
 
 	mutex_unlock(&pit_state->lock);
+	return 0;
 }
 
-static int pit_in_range(struct kvm_io_device *this, gpa_t addr,
-			int len, int is_write)
-{
-	return ((addr >= KVM_PIT_BASE_ADDRESS) &&
-		(addr < KVM_PIT_BASE_ADDRESS + KVM_PIT_MEM_LENGTH));
-}
-
-static void speaker_ioport_write(struct kvm_io_device *this,
-				 gpa_t addr, int len, const void *data)
+static int speaker_ioport_write(struct kvm_io_device *this,
+				gpa_t addr, int len, const void *data)
 {
 	struct kvm_pit *pit = speaker_to_pit(this);
 	struct kvm_kpit_state *pit_state = &pit->pit_state;
 	struct kvm *kvm = pit->kvm;
 	u32 val = *(u32 *) data;
+	if (addr != KVM_SPEAKER_BASE_ADDRESS)
+		return -EOPNOTSUPP;
 
 	mutex_lock(&pit_state->lock);
 	pit_state->speaker_data_on = (val >> 1) & 1;
 	pit_set_gate(kvm, 2, val & 1);
 	mutex_unlock(&pit_state->lock);
+	return 0;
 }
 
-static void speaker_ioport_read(struct kvm_io_device *this,
-				gpa_t addr, int len, void *data)
+static int speaker_ioport_read(struct kvm_io_device *this,
+			       gpa_t addr, int len, void *data)
 {
 	struct kvm_pit *pit = speaker_to_pit(this);
 	struct kvm_kpit_state *pit_state = &pit->pit_state;
 	struct kvm *kvm = pit->kvm;
 	unsigned int refresh_clock;
 	int ret;
+	if (addr != KVM_SPEAKER_BASE_ADDRESS)
+		return -EOPNOTSUPP;
 
 	/* Refresh clock toggles at about 15us. We approximate as 2^14ns. */
 	refresh_clock = ((unsigned int)ktime_to_ns(ktime_get()) >> 14) & 1;
@@ -535,12 +545,7 @@ static void speaker_ioport_read(struct kvm_io_device *this,
 		len = sizeof(ret);
 	memcpy(data, (char *)&ret, len);
 	mutex_unlock(&pit_state->lock);
-}
-
-static int speaker_in_range(struct kvm_io_device *this, gpa_t addr,
-			    int len, int is_write)
-{
-	return (addr == KVM_SPEAKER_BASE_ADDRESS);
+	return 0;
 }
 
 void kvm_pit_reset(struct kvm_pit *pit)
@@ -574,13 +579,11 @@ static void pit_mask_notifer(struct kvm_irq_mask_notifier *kimn, bool mask)
 static const struct kvm_io_device_ops pit_dev_ops = {
 	.read     = pit_ioport_read,
 	.write    = pit_ioport_write,
-	.in_range = pit_in_range,
 };
 
 static const struct kvm_io_device_ops speaker_dev_ops = {
 	.read     = speaker_ioport_read,
 	.write    = speaker_ioport_write,
-	.in_range = speaker_in_range,
 };
 
 /* Caller must have writers lock on slots_lock */
diff --git a/arch/x86/kvm/i8259.c b/arch/x86/kvm/i8259.c
index 1851aec8a7d..1d1bb75dc7b 100644
--- a/arch/x86/kvm/i8259.c
+++ b/arch/x86/kvm/i8259.c
@@ -430,8 +430,7 @@ static u32 elcr_ioport_read(void *opaque, u32 addr1)
 	return s->elcr;
 }
 
-static int picdev_in_range(struct kvm_io_device *this, gpa_t addr,
-			   int len, int is_write)
+static int picdev_in_range(gpa_t addr)
 {
 	switch (addr) {
 	case 0x20:
@@ -451,16 +450,18 @@ static inline struct kvm_pic *to_pic(struct kvm_io_device *dev)
 	return container_of(dev, struct kvm_pic, dev);
 }
 
-static void picdev_write(struct kvm_io_device *this,
+static int picdev_write(struct kvm_io_device *this,
 			 gpa_t addr, int len, const void *val)
 {
 	struct kvm_pic *s = to_pic(this);
 	unsigned char data = *(unsigned char *)val;
+	if (!picdev_in_range(addr))
+		return -EOPNOTSUPP;
 
 	if (len != 1) {
 		if (printk_ratelimit())
 			printk(KERN_ERR "PIC: non byte write\n");
-		return;
+		return 0;
 	}
 	pic_lock(s);
 	switch (addr) {
@@ -476,18 +477,21 @@ static void picdev_write(struct kvm_io_device *this,
 		break;
 	}
 	pic_unlock(s);
+	return 0;
 }
 
-static void picdev_read(struct kvm_io_device *this,
-			gpa_t addr, int len, void *val)
+static int picdev_read(struct kvm_io_device *this,
+		       gpa_t addr, int len, void *val)
 {
 	struct kvm_pic *s = to_pic(this);
 	unsigned char data = 0;
+	if (!picdev_in_range(addr))
+		return -EOPNOTSUPP;
 
 	if (len != 1) {
 		if (printk_ratelimit())
 			printk(KERN_ERR "PIC: non byte read\n");
-		return;
+		return 0;
 	}
 	pic_lock(s);
 	switch (addr) {
@@ -504,6 +508,7 @@ static void picdev_read(struct kvm_io_device *this,
 	}
 	*(unsigned char *)val = data;
 	pic_unlock(s);
+	return 0;
 }
 
 /*
@@ -526,7 +531,6 @@ static void pic_irq_request(void *opaque, int level)
 static const struct kvm_io_device_ops picdev_ops = {
 	.read     = picdev_read,
 	.write    = picdev_write,
-	.in_range = picdev_in_range,
 };
 
 struct kvm_pic *kvm_create_pic(struct kvm *kvm)
diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index 2e028659638..265a765f038 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -546,18 +546,27 @@ static inline struct kvm_lapic *to_lapic(struct kvm_io_device *dev)
 	return container_of(dev, struct kvm_lapic, dev);
 }
 
-static void apic_mmio_read(struct kvm_io_device *this,
-			   gpa_t address, int len, void *data)
+static int apic_mmio_in_range(struct kvm_lapic *apic, gpa_t addr)
+{
+	return apic_hw_enabled(apic) &&
+	    addr >= apic->base_address &&
+	    addr < apic->base_address + LAPIC_MMIO_LENGTH;
+}
+
+static int apic_mmio_read(struct kvm_io_device *this,
+			  gpa_t address, int len, void *data)
 {
 	struct kvm_lapic *apic = to_lapic(this);
 	unsigned int offset = address - apic->base_address;
 	unsigned char alignment = offset & 0xf;
 	u32 result;
+	if (!apic_mmio_in_range(apic, address))
+		return -EOPNOTSUPP;
 
 	if ((alignment + len) > 4) {
 		printk(KERN_ERR "KVM_APIC_READ: alignment error %lx %d",
 		       (unsigned long)address, len);
-		return;
+		return 0;
 	}
 	result = __apic_read(apic, offset & ~0xf);
 
@@ -574,6 +583,7 @@ static void apic_mmio_read(struct kvm_io_device *this,
 		       "should be 1,2, or 4 instead\n", len);
 		break;
 	}
+	return 0;
 }
 
 static void update_divide_count(struct kvm_lapic *apic)
@@ -629,13 +639,15 @@ static void apic_manage_nmi_watchdog(struct kvm_lapic *apic, u32 lvt0_val)
 		apic->vcpu->kvm->arch.vapics_in_nmi_mode--;
 }
 
-static void apic_mmio_write(struct kvm_io_device *this,
-			    gpa_t address, int len, const void *data)
+static int apic_mmio_write(struct kvm_io_device *this,
+			   gpa_t address, int len, const void *data)
 {
 	struct kvm_lapic *apic = to_lapic(this);
 	unsigned int offset = address - apic->base_address;
 	unsigned char alignment = offset & 0xf;
 	u32 val;
+	if (!apic_mmio_in_range(apic, address))
+		return -EOPNOTSUPP;
 
 	/*
 	 * APIC register must be aligned on 128-bits boundary.
@@ -646,7 +658,7 @@ static void apic_mmio_write(struct kvm_io_device *this,
 		/* Don't shout loud, $infamous_os would cause only noise. */
 		apic_debug("apic write: bad size=%d %lx\n",
 			   len, (long)address);
-		return;
+		return 0;
 	}
 
 	val = *(u32 *) data;
@@ -729,7 +741,7 @@ static void apic_mmio_write(struct kvm_io_device *this,
 		hrtimer_cancel(&apic->lapic_timer.timer);
 		apic_set_reg(apic, APIC_TMICT, val);
 		start_apic_timer(apic);
-		return;
+		return 0;
 
 	case APIC_TDCR:
 		if (val & 4)
@@ -743,22 +755,7 @@ static void apic_mmio_write(struct kvm_io_device *this,
 			   offset);
 		break;
 	}
-
-}
-
-static int apic_mmio_range(struct kvm_io_device *this, gpa_t addr,
-			   int len, int size)
-{
-	struct kvm_lapic *apic = to_lapic(this);
-	int ret = 0;
-
-
-	if (apic_hw_enabled(apic) &&
-	    (addr >= apic->base_address) &&
-	    (addr < (apic->base_address + LAPIC_MMIO_LENGTH)))
-		ret = 1;
-
-	return ret;
+	return 0;
 }
 
 void kvm_free_lapic(struct kvm_vcpu *vcpu)
@@ -938,7 +935,6 @@ static struct kvm_timer_ops lapic_timer_ops = {
 static const struct kvm_io_device_ops apic_mmio_ops = {
 	.read     = apic_mmio_read,
 	.write    = apic_mmio_write,
-	.in_range = apic_mmio_range,
 };
 
 int kvm_create_lapic(struct kvm_vcpu *vcpu)
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 7ce6367c197..96f0ae7d97b 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -2333,35 +2333,23 @@ static void kvm_init_msr_list(void)
 	num_msrs_to_save = j;
 }
 
-/*
- * Only apic need an MMIO device hook, so shortcut now..
- */
-static struct kvm_io_device *vcpu_find_pervcpu_dev(struct kvm_vcpu *vcpu,
-						gpa_t addr, int len,
-						int is_write)
+static int vcpu_mmio_write(struct kvm_vcpu *vcpu, gpa_t addr, int len,
+			   const void *v)
 {
-	struct kvm_io_device *dev;
+	if (vcpu->arch.apic &&
+	    !kvm_iodevice_write(&vcpu->arch.apic->dev, addr, len, v))
+		return 0;
 
-	if (vcpu->arch.apic) {
-		dev = &vcpu->arch.apic->dev;
-		if (kvm_iodevice_in_range(dev, addr, len, is_write))
-			return dev;
-	}
-	return NULL;
+	return kvm_io_bus_write(&vcpu->kvm->mmio_bus, addr, len, v);
 }
 
-
-static struct kvm_io_device *vcpu_find_mmio_dev(struct kvm_vcpu *vcpu,
-						gpa_t addr, int len,
-						int is_write)
+static int vcpu_mmio_read(struct kvm_vcpu *vcpu, gpa_t addr, int len, void *v)
 {
-	struct kvm_io_device *dev;
+	if (vcpu->arch.apic &&
+	    !kvm_iodevice_read(&vcpu->arch.apic->dev, addr, len, v))
+		return 0;
 
-	dev = vcpu_find_pervcpu_dev(vcpu, addr, len, is_write);
-	if (dev == NULL)
-		dev = kvm_io_bus_find_dev(&vcpu->kvm->mmio_bus, addr, len,
-					  is_write);
-	return dev;
+	return kvm_io_bus_read(&vcpu->kvm->mmio_bus, addr, len, v);
 }
 
 static int kvm_read_guest_virt(gva_t addr, void *val, unsigned int bytes,
@@ -2430,7 +2418,6 @@ static int emulator_read_emulated(unsigned long addr,
 				  unsigned int bytes,
 				  struct kvm_vcpu *vcpu)
 {
-	struct kvm_io_device *mmio_dev;
 	gpa_t                 gpa;
 
 	if (vcpu->mmio_read_completed) {
@@ -2455,13 +2442,8 @@ mmio:
 	/*
 	 * Is this MMIO handled locally?
 	 */
-	mutex_lock(&vcpu->kvm->lock);
-	mmio_dev = vcpu_find_mmio_dev(vcpu, gpa, bytes, 0);
-	mutex_unlock(&vcpu->kvm->lock);
-	if (mmio_dev) {
-		kvm_iodevice_read(mmio_dev, gpa, bytes, val);
+	if (!vcpu_mmio_read(vcpu, gpa, bytes, val))
 		return X86EMUL_CONTINUE;
-	}
 
 	vcpu->mmio_needed = 1;
 	vcpu->mmio_phys_addr = gpa;
@@ -2488,7 +2470,6 @@ static int emulator_write_emulated_onepage(unsigned long addr,
 					   unsigned int bytes,
 					   struct kvm_vcpu *vcpu)
 {
-	struct kvm_io_device *mmio_dev;
 	gpa_t                 gpa;
 
 	gpa = vcpu->arch.mmu.gva_to_gpa(vcpu, addr);
@@ -2509,13 +2490,8 @@ mmio:
 	/*
 	 * Is this MMIO handled locally?
 	 */
-	mutex_lock(&vcpu->kvm->lock);
-	mmio_dev = vcpu_find_mmio_dev(vcpu, gpa, bytes, 1);
-	mutex_unlock(&vcpu->kvm->lock);
-	if (mmio_dev) {
-		kvm_iodevice_write(mmio_dev, gpa, bytes, val);
+	if (!vcpu_mmio_write(vcpu, gpa, bytes, val))
 		return X86EMUL_CONTINUE;
-	}
 
 	vcpu->mmio_needed = 1;
 	vcpu->mmio_phys_addr = gpa;
@@ -2850,48 +2826,40 @@ int complete_pio(struct kvm_vcpu *vcpu)
 	return 0;
 }
 
-static void kernel_pio(struct kvm_io_device *pio_dev,
-		       struct kvm_vcpu *vcpu,
-		       void *pd)
+static int kernel_pio(struct kvm_vcpu *vcpu, void *pd)
 {
 	/* TODO: String I/O for in kernel device */
+	int r;
 
 	if (vcpu->arch.pio.in)
-		kvm_iodevice_read(pio_dev, vcpu->arch.pio.port,
-				  vcpu->arch.pio.size,
-				  pd);
+		r = kvm_io_bus_read(&vcpu->kvm->pio_bus, vcpu->arch.pio.port,
+				    vcpu->arch.pio.size, pd);
 	else
-		kvm_iodevice_write(pio_dev, vcpu->arch.pio.port,
-				   vcpu->arch.pio.size,
-				   pd);
+		r = kvm_io_bus_write(&vcpu->kvm->pio_bus, vcpu->arch.pio.port,
+				     vcpu->arch.pio.size, pd);
+	return r;
 }
 
-static void pio_string_write(struct kvm_io_device *pio_dev,
-			     struct kvm_vcpu *vcpu)
+static int pio_string_write(struct kvm_vcpu *vcpu)
 {
 	struct kvm_pio_request *io = &vcpu->arch.pio;
 	void *pd = vcpu->arch.pio_data;
-	int i;
+	int i, r = 0;
 
 	for (i = 0; i < io->cur_count; i++) {
-		kvm_iodevice_write(pio_dev, io->port,
-				   io->size,
-				   pd);
+		if (kvm_io_bus_write(&vcpu->kvm->pio_bus,
+				     io->port, io->size, pd)) {
+			r = -EOPNOTSUPP;
+			break;
+		}
 		pd += io->size;
 	}
-}
-
-static struct kvm_io_device *vcpu_find_pio_dev(struct kvm_vcpu *vcpu,
-					       gpa_t addr, int len,
-					       int is_write)
-{
-	return kvm_io_bus_find_dev(&vcpu->kvm->pio_bus, addr, len, is_write);
+	return r;
 }
 
 int kvm_emulate_pio(struct kvm_vcpu *vcpu, struct kvm_run *run, int in,
 		  int size, unsigned port)
 {
-	struct kvm_io_device *pio_dev;
 	unsigned long val;
 
 	vcpu->run->exit_reason = KVM_EXIT_IO;
@@ -2911,11 +2879,7 @@ int kvm_emulate_pio(struct kvm_vcpu *vcpu, struct kvm_run *run, int in,
 	val = kvm_register_read(vcpu, VCPU_REGS_RAX);
 	memcpy(vcpu->arch.pio_data, &val, 4);
 
-	mutex_lock(&vcpu->kvm->lock);
-	pio_dev = vcpu_find_pio_dev(vcpu, port, size, !in);
-	mutex_unlock(&vcpu->kvm->lock);
-	if (pio_dev) {
-		kernel_pio(pio_dev, vcpu, vcpu->arch.pio_data);
+	if (!kernel_pio(vcpu, vcpu->arch.pio_data)) {
 		complete_pio(vcpu);
 		return 1;
 	}
@@ -2929,7 +2893,6 @@ int kvm_emulate_pio_string(struct kvm_vcpu *vcpu, struct kvm_run *run, int in,
 {
 	unsigned now, in_page;
 	int ret = 0;
-	struct kvm_io_device *pio_dev;
 
 	vcpu->run->exit_reason = KVM_EXIT_IO;
 	vcpu->run->io.direction = in ? KVM_EXIT_IO_IN : KVM_EXIT_IO_OUT;
@@ -2973,12 +2936,6 @@ int kvm_emulate_pio_string(struct kvm_vcpu *vcpu, struct kvm_run *run, int in,
 
 	vcpu->arch.pio.guest_gva = address;
 
-	mutex_lock(&vcpu->kvm->lock);
-	pio_dev = vcpu_find_pio_dev(vcpu, port,
-				    vcpu->arch.pio.cur_count,
-				    !vcpu->arch.pio.in);
-	mutex_unlock(&vcpu->kvm->lock);
-
 	if (!vcpu->arch.pio.in) {
 		/* string PIO write */
 		ret = pio_copy_data(vcpu);
@@ -2986,16 +2943,13 @@ int kvm_emulate_pio_string(struct kvm_vcpu *vcpu, struct kvm_run *run, int in,
 			kvm_inject_gp(vcpu, 0);
 			return 1;
 		}
-		if (ret == 0 && pio_dev) {
-			pio_string_write(pio_dev, vcpu);
+		if (ret == 0 && !pio_string_write(vcpu)) {
 			complete_pio(vcpu);
 			if (vcpu->arch.pio.count == 0)
 				ret = 1;
 		}
-	} else if (pio_dev)
-		pr_unimpl(vcpu, "no string pio read support yet, "
-		       "port %x size %d count %ld\n",
-			port, size, count);
+	}
+	/* no string PIO read support yet */
 
 	return ret;
 }
-- 
cgit v1.2.3


From c323c0e5f06150cc000e09e8e3b22356099e7bde Mon Sep 17 00:00:00 2001
From: Andre Przywara <andre.przywara@amd.com>
Date: Wed, 24 Jun 2009 15:37:05 +0200
Subject: KVM: Ignore PCI ECS I/O enablement

Linux guests will try to enable access to the extended PCI config space
via the I/O ports 0xCF8/0xCFC on AMD Fam10h CPU. Since we (currently?)
don't use ECS, simply ignore write and read attempts.

Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/x86.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 96f0ae7d97b..af40e23df25 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -844,6 +844,8 @@ int kvm_set_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 data)
 			return 1;
 		}
 		break;
+	case MSR_AMD64_NB_CFG:
+		break;
 	case MSR_IA32_DEBUGCTLMSR:
 		if (!data) {
 			/* We support the non-activated case already */
@@ -1049,6 +1051,7 @@ int kvm_get_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata)
 	case MSR_P6_EVNTSEL1:
 	case MSR_K7_EVNTSEL0:
 	case MSR_K8_INT_PENDING_MSG:
+	case MSR_AMD64_NB_CFG:
 		data = 0;
 		break;
 	case MSR_MTRRcap:
-- 
cgit v1.2.3


From aec51dc4f1584018d7e35269e04e3dde3d2033e6 Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Wed, 1 Jul 2009 16:01:02 +0300
Subject: KVM: Trace mmio

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/x86.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index af40e23df25..d32e3c6d317 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -37,6 +37,8 @@
 #include <linux/iommu.h>
 #include <linux/intel-iommu.h>
 #include <linux/cpufreq.h>
+#include <trace/events/kvm.h>
+#undef TRACE_INCLUDE_FILE
 #define CREATE_TRACE_POINTS
 #include "trace.h"
 
@@ -2425,6 +2427,8 @@ static int emulator_read_emulated(unsigned long addr,
 
 	if (vcpu->mmio_read_completed) {
 		memcpy(val, vcpu->mmio_data, bytes);
+		trace_kvm_mmio(KVM_TRACE_MMIO_READ, bytes,
+			       vcpu->mmio_phys_addr, *(u64 *)val);
 		vcpu->mmio_read_completed = 0;
 		return X86EMUL_CONTINUE;
 	}
@@ -2445,8 +2449,12 @@ mmio:
 	/*
 	 * Is this MMIO handled locally?
 	 */
-	if (!vcpu_mmio_read(vcpu, gpa, bytes, val))
+	if (!vcpu_mmio_read(vcpu, gpa, bytes, val)) {
+		trace_kvm_mmio(KVM_TRACE_MMIO_READ, bytes, gpa, *(u64 *)val);
 		return X86EMUL_CONTINUE;
+	}
+
+	trace_kvm_mmio(KVM_TRACE_MMIO_READ_UNSATISFIED, bytes, gpa, 0);
 
 	vcpu->mmio_needed = 1;
 	vcpu->mmio_phys_addr = gpa;
@@ -2490,6 +2498,7 @@ static int emulator_write_emulated_onepage(unsigned long addr,
 		return X86EMUL_CONTINUE;
 
 mmio:
+	trace_kvm_mmio(KVM_TRACE_MMIO_WRITE, bytes, gpa, *(u64 *)val);
 	/*
 	 * Is this MMIO handled locally?
 	 */
-- 
cgit v1.2.3


From cb24772140e09cb2503af7a4736ae3e08e9ac7d3 Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Wed, 1 Jul 2009 18:25:44 +0300
Subject: KVM: Trace apic registers using their symbolic names

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/trace.h | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/trace.h b/arch/x86/kvm/trace.h
index cd8c90db41a..6c2c87fa6e4 100644
--- a/arch/x86/kvm/trace.h
+++ b/arch/x86/kvm/trace.h
@@ -111,6 +111,15 @@ TRACE_EVENT(kvm_cpuid,
 		  __entry->rbx, __entry->rcx, __entry->rdx)
 );
 
+#define AREG(x) { APIC_##x, "APIC_" #x }
+
+#define kvm_trace_symbol_apic						    \
+	AREG(ID), AREG(LVR), AREG(TASKPRI), AREG(ARBPRI), AREG(PROCPRI),    \
+	AREG(EOI), AREG(RRR), AREG(LDR), AREG(DFR), AREG(SPIV), AREG(ISR),  \
+	AREG(TMR), AREG(IRR), AREG(ESR), AREG(ICR), AREG(ICR2), AREG(LVTT), \
+	AREG(LVTTHMR), AREG(LVTPC), AREG(LVT0), AREG(LVT1), AREG(LVTERR),   \
+	AREG(TMICT), AREG(TMCCT), AREG(TDCR), AREG(SELF_IPI), AREG(EFEAT),  \
+	AREG(ECTRL)
 /*
  * Tracepoint for apic access.
  */
@@ -130,9 +139,10 @@ TRACE_EVENT(kvm_apic,
 		__entry->val		= val;
 	),
 
-	TP_printk("apic_%s 0x%x = 0x%x",
+	TP_printk("apic_%s %s = 0x%x",
 		  __entry->rw ? "write" : "read",
-		  __entry->reg, __entry->val)
+		  __print_symbolic(__entry->reg, kvm_trace_symbol_apic),
+		  __entry->val)
 );
 
 #define trace_kvm_apic_read(reg, val)		trace_kvm_apic(0, reg, val)
-- 
cgit v1.2.3


From fc61b800f9506ca47bf1439342a79847f2353562 Mon Sep 17 00:00:00 2001
From: Gleb Natapov <gleb@redhat.com>
Date: Sun, 5 Jul 2009 17:39:35 +0300
Subject: KVM: Add Directed EOI support to APIC emulation

Directed EOI is specified by x2APIC, but is available even when lapic is
in xAPIC mode.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/include/asm/apicdef.h |  2 ++
 arch/x86/kvm/lapic.c           | 38 ++++++++++++++++++++++++++++++--------
 arch/x86/kvm/lapic.h           |  1 +
 arch/x86/kvm/x86.c             |  4 ++--
 arch/x86/kvm/x86.h             |  4 ++++
 5 files changed, 39 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/apicdef.h b/arch/x86/include/asm/apicdef.h
index 7ddb36ab933..74ca38f6a4d 100644
--- a/arch/x86/include/asm/apicdef.h
+++ b/arch/x86/include/asm/apicdef.h
@@ -14,6 +14,7 @@
 
 #define	APIC_LVR	0x30
 #define		APIC_LVR_MASK		0xFF00FF
+#define		APIC_LVR_DIRECTED_EOI	(1 << 24)
 #define		GET_APIC_VERSION(x)	((x) & 0xFFu)
 #define		GET_APIC_MAXLVT(x)	(((x) >> 16) & 0xFFu)
 #ifdef CONFIG_X86_32
@@ -40,6 +41,7 @@
 #define		APIC_DFR_CLUSTER		0x0FFFFFFFul
 #define		APIC_DFR_FLAT			0xFFFFFFFFul
 #define	APIC_SPIV	0xF0
+#define		APIC_SPIV_DIRECTED_EOI		(1 << 12)
 #define		APIC_SPIV_FOCUS_DISABLED	(1 << 9)
 #define		APIC_SPIV_APIC_ENABLED		(1 << 8)
 #define	APIC_ISR	0x100
diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index 265a765f038..62ea2abfd96 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -35,6 +35,7 @@
 #include "kvm_cache_regs.h"
 #include "irq.h"
 #include "trace.h"
+#include "x86.h"
 
 #ifndef CONFIG_X86_64
 #define mod_64(x, y) ((x) - (y) * div64_u64(x, y))
@@ -142,6 +143,21 @@ static inline int apic_lvt_nmi_mode(u32 lvt_val)
 	return (lvt_val & (APIC_MODE_MASK | APIC_LVT_MASKED)) == APIC_DM_NMI;
 }
 
+void kvm_apic_set_version(struct kvm_vcpu *vcpu)
+{
+	struct kvm_lapic *apic = vcpu->arch.apic;
+	struct kvm_cpuid_entry2 *feat;
+	u32 v = APIC_VERSION;
+
+	if (!irqchip_in_kernel(vcpu->kvm))
+		return;
+
+	feat = kvm_find_cpuid_entry(apic->vcpu, 0x1, 0);
+	if (feat && (feat->ecx & (1 << (X86_FEATURE_X2APIC & 31))))
+		v |= APIC_LVR_DIRECTED_EOI;
+	apic_set_reg(apic, APIC_LVR, v);
+}
+
 static unsigned int apic_lvt_mask[APIC_LVT_NUM] = {
 	LVT_MASK | APIC_LVT_TIMER_PERIODIC,	/* LVTT */
 	LVT_MASK | APIC_MODE_MASK,	/* LVTTHMR */
@@ -442,9 +458,11 @@ static void apic_set_eoi(struct kvm_lapic *apic)
 		trigger_mode = IOAPIC_LEVEL_TRIG;
 	else
 		trigger_mode = IOAPIC_EDGE_TRIG;
-	mutex_lock(&apic->vcpu->kvm->irq_lock);
-	kvm_ioapic_update_eoi(apic->vcpu->kvm, vector, trigger_mode);
-	mutex_unlock(&apic->vcpu->kvm->irq_lock);
+	if (!(apic_get_reg(apic, APIC_SPIV) & APIC_SPIV_DIRECTED_EOI)) {
+		mutex_lock(&apic->vcpu->kvm->irq_lock);
+		kvm_ioapic_update_eoi(apic->vcpu->kvm, vector, trigger_mode);
+		mutex_unlock(&apic->vcpu->kvm->irq_lock);
+	}
 }
 
 static void apic_send_ipi(struct kvm_lapic *apic)
@@ -694,8 +712,11 @@ static int apic_mmio_write(struct kvm_io_device *this,
 		apic_set_reg(apic, APIC_DFR, val | 0x0FFFFFFF);
 		break;
 
-	case APIC_SPIV:
-		apic_set_reg(apic, APIC_SPIV, val & 0x3ff);
+	case APIC_SPIV: {
+		u32 mask = 0x3ff;
+		if (apic_get_reg(apic, APIC_LVR) & APIC_LVR_DIRECTED_EOI)
+			mask |= APIC_SPIV_DIRECTED_EOI;
+		apic_set_reg(apic, APIC_SPIV, val & mask);
 		if (!(val & APIC_SPIV_APIC_ENABLED)) {
 			int i;
 			u32 lvt_val;
@@ -710,7 +731,7 @@ static int apic_mmio_write(struct kvm_io_device *this,
 
 		}
 		break;
-
+	}
 	case APIC_ICR:
 		/* No delay here, so we always clear the pending bit */
 		apic_set_reg(apic, APIC_ICR, val & ~(1 << 12));
@@ -837,7 +858,7 @@ void kvm_lapic_reset(struct kvm_vcpu *vcpu)
 	hrtimer_cancel(&apic->lapic_timer.timer);
 
 	apic_set_reg(apic, APIC_ID, vcpu->vcpu_id << 24);
-	apic_set_reg(apic, APIC_LVR, APIC_VERSION);
+	kvm_apic_set_version(apic->vcpu);
 
 	for (i = 0; i < APIC_LVT_NUM; i++)
 		apic_set_reg(apic, APIC_LVTT + 0x10 * i, APIC_LVT_MASKED);
@@ -1041,7 +1062,8 @@ void kvm_apic_post_state_restore(struct kvm_vcpu *vcpu)
 
 	apic->base_address = vcpu->arch.apic_base &
 			     MSR_IA32_APICBASE_BASE;
-	apic_set_reg(apic, APIC_LVR, APIC_VERSION);
+	kvm_apic_set_version(vcpu);
+
 	apic_update_ppr(apic);
 	hrtimer_cancel(&apic->lapic_timer.timer);
 	update_divide_count(apic);
diff --git a/arch/x86/kvm/lapic.h b/arch/x86/kvm/lapic.h
index 3f3ecc6edbf..bc1c5243c86 100644
--- a/arch/x86/kvm/lapic.h
+++ b/arch/x86/kvm/lapic.h
@@ -29,6 +29,7 @@ u64 kvm_lapic_get_cr8(struct kvm_vcpu *vcpu);
 void kvm_lapic_set_tpr(struct kvm_vcpu *vcpu, unsigned long cr8);
 void kvm_lapic_set_base(struct kvm_vcpu *vcpu, u64 value);
 u64 kvm_lapic_get_base(struct kvm_vcpu *vcpu);
+void kvm_apic_set_version(struct kvm_vcpu *vcpu);
 
 int kvm_apic_match_physical_addr(struct kvm_lapic *apic, u16 dest);
 int kvm_apic_match_logical_addr(struct kvm_lapic *apic, u8 mda);
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index d32e3c6d317..086f93137e3 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -79,8 +79,6 @@ static u64 __read_mostly efer_reserved_bits = 0xfffffffffffffffeULL;
 
 static int kvm_dev_ioctl_get_supported_cpuid(struct kvm_cpuid2 *cpuid,
 				    struct kvm_cpuid_entry2 __user *entries);
-struct kvm_cpuid_entry2 *kvm_find_cpuid_entry(struct kvm_vcpu *vcpu,
-					      u32 function, u32 index);
 
 struct kvm_x86_ops *kvm_x86_ops;
 EXPORT_SYMBOL_GPL(kvm_x86_ops);
@@ -1373,6 +1371,7 @@ static int kvm_vcpu_ioctl_set_cpuid(struct kvm_vcpu *vcpu,
 	vcpu->arch.cpuid_nent = cpuid->nent;
 	cpuid_fix_nx_cap(vcpu);
 	r = 0;
+	kvm_apic_set_version(vcpu);
 
 out_free:
 	vfree(cpuid_entries);
@@ -1394,6 +1393,7 @@ static int kvm_vcpu_ioctl_set_cpuid2(struct kvm_vcpu *vcpu,
 			   cpuid->nent * sizeof(struct kvm_cpuid_entry2)))
 		goto out;
 	vcpu->arch.cpuid_nent = cpuid->nent;
+	kvm_apic_set_version(vcpu);
 	return 0;
 
 out:
diff --git a/arch/x86/kvm/x86.h b/arch/x86/kvm/x86.h
index 4c8e10af78e..5eadea585d2 100644
--- a/arch/x86/kvm/x86.h
+++ b/arch/x86/kvm/x86.h
@@ -31,4 +31,8 @@ static inline bool kvm_exception_is_soft(unsigned int nr)
 {
 	return (nr == BP_VECTOR) || (nr == OF_VECTOR);
 }
+
+struct kvm_cpuid_entry2 *kvm_find_cpuid_entry(struct kvm_vcpu *vcpu,
+                                             u32 function, u32 index);
+
 #endif
-- 
cgit v1.2.3


From 0105d1a526404cfc9779552a6198bfd0e5fc937a Mon Sep 17 00:00:00 2001
From: Gleb Natapov <gleb@redhat.com>
Date: Sun, 5 Jul 2009 17:39:36 +0300
Subject: KVM: x2apic interface to lapic

This patch implements MSR interface to local apic as defines by x2apic
Intel specification.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/lapic.c | 223 +++++++++++++++++++++++++++++++++++++--------------
 arch/x86/kvm/lapic.h |   2 +
 arch/x86/kvm/x86.c   |   7 +-
 3 files changed, 173 insertions(+), 59 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index 62ea2abfd96..683345a121b 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -32,6 +32,7 @@
 #include <asm/current.h>
 #include <asm/apicdef.h>
 #include <asm/atomic.h>
+#include <asm/apicdef.h>
 #include "kvm_cache_regs.h"
 #include "irq.h"
 #include "trace.h"
@@ -158,6 +159,11 @@ void kvm_apic_set_version(struct kvm_vcpu *vcpu)
 	apic_set_reg(apic, APIC_LVR, v);
 }
 
+static inline int apic_x2apic_mode(struct kvm_lapic *apic)
+{
+	return apic->vcpu->arch.apic_base & X2APIC_ENABLE;
+}
+
 static unsigned int apic_lvt_mask[APIC_LVT_NUM] = {
 	LVT_MASK | APIC_LVT_TIMER_PERIODIC,	/* LVTT */
 	LVT_MASK | APIC_MODE_MASK,	/* LVTTHMR */
@@ -284,7 +290,12 @@ int kvm_apic_match_physical_addr(struct kvm_lapic *apic, u16 dest)
 int kvm_apic_match_logical_addr(struct kvm_lapic *apic, u8 mda)
 {
 	int result = 0;
-	u8 logical_id;
+	u32 logical_id;
+
+	if (apic_x2apic_mode(apic)) {
+		logical_id = apic_get_reg(apic, APIC_LDR);
+		return logical_id & mda;
+	}
 
 	logical_id = GET_APIC_LOGICAL_ID(apic_get_reg(apic, APIC_LDR));
 
@@ -477,7 +488,10 @@ static void apic_send_ipi(struct kvm_lapic *apic)
 	irq.level = icr_low & APIC_INT_ASSERT;
 	irq.trig_mode = icr_low & APIC_INT_LEVELTRIG;
 	irq.shorthand = icr_low & APIC_SHORT_MASK;
-	irq.dest_id = GET_APIC_DEST_FIELD(icr_high);
+	if (apic_x2apic_mode(apic))
+		irq.dest_id = icr_high;
+	else
+		irq.dest_id = GET_APIC_DEST_FIELD(icr_high);
 
 	apic_debug("icr_high 0x%x, icr_low 0x%x, "
 		   "short_hand 0x%x, dest 0x%x, trig_mode 0x%x, level 0x%x, "
@@ -538,6 +552,12 @@ static u32 __apic_read(struct kvm_lapic *apic, unsigned int offset)
 		return 0;
 
 	switch (offset) {
+	case APIC_ID:
+		if (apic_x2apic_mode(apic))
+			val = kvm_apic_id(apic);
+		else
+			val = kvm_apic_id(apic) << 24;
+		break;
 	case APIC_ARBPRI:
 		printk(KERN_WARNING "Access APIC ARBPRI register "
 		       "which is for P6\n");
@@ -564,28 +584,26 @@ static inline struct kvm_lapic *to_lapic(struct kvm_io_device *dev)
 	return container_of(dev, struct kvm_lapic, dev);
 }
 
-static int apic_mmio_in_range(struct kvm_lapic *apic, gpa_t addr)
-{
-	return apic_hw_enabled(apic) &&
-	    addr >= apic->base_address &&
-	    addr < apic->base_address + LAPIC_MMIO_LENGTH;
-}
-
-static int apic_mmio_read(struct kvm_io_device *this,
-			  gpa_t address, int len, void *data)
+static int apic_reg_read(struct kvm_lapic *apic, u32 offset, int len,
+		void *data)
 {
-	struct kvm_lapic *apic = to_lapic(this);
-	unsigned int offset = address - apic->base_address;
 	unsigned char alignment = offset & 0xf;
 	u32 result;
-	if (!apic_mmio_in_range(apic, address))
-		return -EOPNOTSUPP;
+	/* this bitmask has a bit cleared for each reserver register */
+	static const u64 rmask = 0x43ff01ffffffe70cULL;
 
 	if ((alignment + len) > 4) {
-		printk(KERN_ERR "KVM_APIC_READ: alignment error %lx %d",
-		       (unsigned long)address, len);
-		return 0;
+		printk(KERN_ERR "KVM_APIC_READ: alignment error %x %d\n",
+				offset, len);
+		return 1;
 	}
+
+	if (offset > 0x3f0 || !(rmask & (1ULL << (offset >> 4)))) {
+		printk(KERN_ERR "KVM_APIC_READ: read reserved register %x\n",
+				offset);
+		return 1;
+	}
+
 	result = __apic_read(apic, offset & ~0xf);
 
 	trace_kvm_apic_read(offset, result);
@@ -604,6 +622,27 @@ static int apic_mmio_read(struct kvm_io_device *this,
 	return 0;
 }
 
+static int apic_mmio_in_range(struct kvm_lapic *apic, gpa_t addr)
+{
+	return apic_hw_enabled(apic) &&
+	    addr >= apic->base_address &&
+	    addr < apic->base_address + LAPIC_MMIO_LENGTH;
+}
+
+static int apic_mmio_read(struct kvm_io_device *this,
+			   gpa_t address, int len, void *data)
+{
+	struct kvm_lapic *apic = to_lapic(this);
+	u32 offset = address - apic->base_address;
+
+	if (!apic_mmio_in_range(apic, address))
+		return -EOPNOTSUPP;
+
+	apic_reg_read(apic, offset, len, data);
+
+	return 0;
+}
+
 static void update_divide_count(struct kvm_lapic *apic)
 {
 	u32 tmp1, tmp2, tdcr;
@@ -657,42 +696,18 @@ static void apic_manage_nmi_watchdog(struct kvm_lapic *apic, u32 lvt0_val)
 		apic->vcpu->kvm->arch.vapics_in_nmi_mode--;
 }
 
-static int apic_mmio_write(struct kvm_io_device *this,
-			   gpa_t address, int len, const void *data)
+static int apic_reg_write(struct kvm_lapic *apic, u32 reg, u32 val)
 {
-	struct kvm_lapic *apic = to_lapic(this);
-	unsigned int offset = address - apic->base_address;
-	unsigned char alignment = offset & 0xf;
-	u32 val;
-	if (!apic_mmio_in_range(apic, address))
-		return -EOPNOTSUPP;
-
-	/*
-	 * APIC register must be aligned on 128-bits boundary.
-	 * 32/64/128 bits registers must be accessed thru 32 bits.
-	 * Refer SDM 8.4.1
-	 */
-	if (len != 4 || alignment) {
-		/* Don't shout loud, $infamous_os would cause only noise. */
-		apic_debug("apic write: bad size=%d %lx\n",
-			   len, (long)address);
-		return 0;
-	}
-
-	val = *(u32 *) data;
+	int ret = 0;
 
-	/* too common printing */
-	if (offset != APIC_EOI)
-		apic_debug("%s: offset 0x%x with length 0x%x, and value is "
-			   "0x%x\n", __func__, offset, len, val);
+	trace_kvm_apic_write(reg, val);
 
-	offset &= 0xff0;
-
-	trace_kvm_apic_write(offset, val);
-
-	switch (offset) {
+	switch (reg) {
 	case APIC_ID:		/* Local APIC ID */
-		apic_set_reg(apic, APIC_ID, val);
+		if (!apic_x2apic_mode(apic))
+			apic_set_reg(apic, APIC_ID, val);
+		else
+			ret = 1;
 		break;
 
 	case APIC_TASKPRI:
@@ -705,11 +720,17 @@ static int apic_mmio_write(struct kvm_io_device *this,
 		break;
 
 	case APIC_LDR:
-		apic_set_reg(apic, APIC_LDR, val & APIC_LDR_MASK);
+		if (!apic_x2apic_mode(apic))
+			apic_set_reg(apic, APIC_LDR, val & APIC_LDR_MASK);
+		else
+			ret = 1;
 		break;
 
 	case APIC_DFR:
-		apic_set_reg(apic, APIC_DFR, val | 0x0FFFFFFF);
+		if (!apic_x2apic_mode(apic))
+			apic_set_reg(apic, APIC_DFR, val | 0x0FFFFFFF);
+		else
+			ret = 1;
 		break;
 
 	case APIC_SPIV: {
@@ -739,7 +760,9 @@ static int apic_mmio_write(struct kvm_io_device *this,
 		break;
 
 	case APIC_ICR2:
-		apic_set_reg(apic, APIC_ICR2, val & 0xff000000);
+		if (!apic_x2apic_mode(apic))
+			val &= 0xff000000;
+		apic_set_reg(apic, APIC_ICR2, val);
 		break;
 
 	case APIC_LVT0:
@@ -753,8 +776,8 @@ static int apic_mmio_write(struct kvm_io_device *this,
 		if (!apic_sw_enabled(apic))
 			val |= APIC_LVT_MASKED;
 
-		val &= apic_lvt_mask[(offset - APIC_LVTT) >> 4];
-		apic_set_reg(apic, offset, val);
+		val &= apic_lvt_mask[(reg - APIC_LVTT) >> 4];
+		apic_set_reg(apic, reg, val);
 
 		break;
 
@@ -762,7 +785,7 @@ static int apic_mmio_write(struct kvm_io_device *this,
 		hrtimer_cancel(&apic->lapic_timer.timer);
 		apic_set_reg(apic, APIC_TMICT, val);
 		start_apic_timer(apic);
-		return 0;
+		break;
 
 	case APIC_TDCR:
 		if (val & 4)
@@ -771,11 +794,58 @@ static int apic_mmio_write(struct kvm_io_device *this,
 		update_divide_count(apic);
 		break;
 
+	case APIC_ESR:
+		if (apic_x2apic_mode(apic) && val != 0) {
+			printk(KERN_ERR "KVM_WRITE:ESR not zero %x\n", val);
+			ret = 1;
+		}
+		break;
+
+	case APIC_SELF_IPI:
+		if (apic_x2apic_mode(apic)) {
+			apic_reg_write(apic, APIC_ICR, 0x40000 | (val & 0xff));
+		} else
+			ret = 1;
+		break;
 	default:
-		apic_debug("Local APIC Write to read-only register %x\n",
-			   offset);
+		ret = 1;
 		break;
 	}
+	if (ret)
+		apic_debug("Local APIC Write to read-only register %x\n", reg);
+	return ret;
+}
+
+static int apic_mmio_write(struct kvm_io_device *this,
+			    gpa_t address, int len, const void *data)
+{
+	struct kvm_lapic *apic = to_lapic(this);
+	unsigned int offset = address - apic->base_address;
+	u32 val;
+
+	if (!apic_mmio_in_range(apic, address))
+		return -EOPNOTSUPP;
+
+	/*
+	 * APIC register must be aligned on 128-bits boundary.
+	 * 32/64/128 bits registers must be accessed thru 32 bits.
+	 * Refer SDM 8.4.1
+	 */
+	if (len != 4 || (offset & 0xf)) {
+		/* Don't shout loud, $infamous_os would cause only noise. */
+		apic_debug("apic write: bad size=%d %lx\n", len, (long)address);
+		return;
+	}
+
+	val = *(u32*)data;
+
+	/* too common printing */
+	if (offset != APIC_EOI)
+		apic_debug("%s: offset 0x%x with length 0x%x, and value is "
+			   "0x%x\n", __func__, offset, len, val);
+
+	apic_reg_write(apic, offset & 0xff0, val);
+
 	return 0;
 }
 
@@ -834,6 +904,11 @@ void kvm_lapic_set_base(struct kvm_vcpu *vcpu, u64 value)
 		value &= ~MSR_IA32_APICBASE_BSP;
 
 	vcpu->arch.apic_base = value;
+	if (apic_x2apic_mode(apic)) {
+		u32 id = kvm_apic_id(apic);
+		u32 ldr = ((id & ~0xf) << 16) | (1 << (id & 0xf));
+		apic_set_reg(apic, APIC_LDR, ldr);
+	}
 	apic->base_address = apic->vcpu->arch.apic_base &
 			     MSR_IA32_APICBASE_BASE;
 
@@ -1130,3 +1205,35 @@ void kvm_lapic_set_vapic_addr(struct kvm_vcpu *vcpu, gpa_t vapic_addr)
 
 	vcpu->arch.apic->vapic_addr = vapic_addr;
 }
+
+int kvm_x2apic_msr_write(struct kvm_vcpu *vcpu, u32 msr, u64 data)
+{
+	struct kvm_lapic *apic = vcpu->arch.apic;
+	u32 reg = (msr - APIC_BASE_MSR) << 4;
+
+	if (!irqchip_in_kernel(vcpu->kvm) || !apic_x2apic_mode(apic))
+		return 1;
+
+	/* if this is ICR write vector before command */
+	if (msr == 0x830)
+		apic_reg_write(apic, APIC_ICR2, (u32)(data >> 32));
+	return apic_reg_write(apic, reg, (u32)data);
+}
+
+int kvm_x2apic_msr_read(struct kvm_vcpu *vcpu, u32 msr, u64 *data)
+{
+	struct kvm_lapic *apic = vcpu->arch.apic;
+	u32 reg = (msr - APIC_BASE_MSR) << 4, low, high = 0;
+
+	if (!irqchip_in_kernel(vcpu->kvm) || !apic_x2apic_mode(apic))
+		return 1;
+
+	if (apic_reg_read(apic, reg, 4, &low))
+		return 1;
+	if (msr == 0x830)
+		apic_reg_read(apic, APIC_ICR2, 4, &high);
+
+	*data = (((u64)high) << 32) | low;
+
+	return 0;
+}
diff --git a/arch/x86/kvm/lapic.h b/arch/x86/kvm/lapic.h
index bc1c5243c86..40010b09c4a 100644
--- a/arch/x86/kvm/lapic.h
+++ b/arch/x86/kvm/lapic.h
@@ -46,4 +46,6 @@ void kvm_lapic_set_vapic_addr(struct kvm_vcpu *vcpu, gpa_t vapic_addr);
 void kvm_lapic_sync_from_vapic(struct kvm_vcpu *vcpu);
 void kvm_lapic_sync_to_vapic(struct kvm_vcpu *vcpu);
 
+int kvm_x2apic_msr_write(struct kvm_vcpu *vcpu, u32 msr, u64 data);
+int kvm_x2apic_msr_read(struct kvm_vcpu *vcpu, u32 msr, u64 *data);
 #endif
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 086f93137e3..a50c83232e7 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -867,6 +867,8 @@ int kvm_set_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 data)
 	case MSR_IA32_APICBASE:
 		kvm_set_apic_base(vcpu, data);
 		break;
+	case APIC_BASE_MSR ... APIC_BASE_MSR + 0x3ff:
+		return kvm_x2apic_msr_write(vcpu, msr, data);
 	case MSR_IA32_MISC_ENABLE:
 		vcpu->arch.ia32_misc_enable_msr = data;
 		break;
@@ -1065,6 +1067,9 @@ int kvm_get_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata)
 	case MSR_IA32_APICBASE:
 		data = kvm_get_apic_base(vcpu);
 		break;
+	case APIC_BASE_MSR ... APIC_BASE_MSR + 0x3ff:
+		return kvm_x2apic_msr_read(vcpu, msr, pdata);
+		break;
 	case MSR_IA32_MISC_ENABLE:
 		data = vcpu->arch.ia32_misc_enable_msr;
 		break;
@@ -1469,7 +1474,7 @@ static void do_cpuid_ent(struct kvm_cpuid_entry2 *entry, u32 function,
 		0 /* TM2 */ | F(SSSE3) | 0 /* CNXT-ID */ | 0 /* Reserved */ |
 		0 /* Reserved */ | F(CX16) | 0 /* xTPR Update, PDCM */ |
 		0 /* Reserved, DCA */ | F(XMM4_1) |
-		F(XMM4_2) | 0 /* x2APIC */ | F(MOVBE) | F(POPCNT) |
+		F(XMM4_2) | F(X2APIC) | F(MOVBE) | F(POPCNT) |
 		0 /* Reserved, XSAVE, OSXSAVE */;
 	/* cpuid 0x80000001.ecx */
 	const u32 kvm_supported_word6_x86_features =
-- 
cgit v1.2.3


From 756975bbfd185169aac19f227d65a8d738a5f5f8 Mon Sep 17 00:00:00 2001
From: Sheng Yang <sheng@linux.intel.com>
Date: Mon, 6 Jul 2009 11:05:39 +0800
Subject: KVM: Fix apic_mmio_write return for unaligned write

Some in-famous OS do unaligned writing for APIC MMIO, and the return value
has been missed in recent change, then the OS hangs.

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/lapic.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index 683345a121b..6c846030854 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -834,7 +834,7 @@ static int apic_mmio_write(struct kvm_io_device *this,
 	if (len != 4 || (offset & 0xf)) {
 		/* Don't shout loud, $infamous_os would cause only noise. */
 		apic_debug("apic write: bad size=%d %lx\n", len, (long)address);
-		return;
+		return 0;
 	}
 
 	val = *(u32*)data;
-- 
cgit v1.2.3


From 6098ca939ee5ceb81d6628b9130112516bae7400 Mon Sep 17 00:00:00 2001
From: Andre Przywara <andre.przywara@amd.com>
Date: Fri, 3 Jul 2009 16:00:14 +0200
Subject: KVM: handle AMD microcode MSR

Windows 7 tries to update the CPU's microcode on some processors,
so we ignore the MSR write here. The patchlevel register is already handled
(returning 0), because the MSR number is the same as Intel's.

Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/x86.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index a50c83232e7..6dde99ca743 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -861,6 +861,7 @@ int kvm_set_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 data)
 	case MSR_IA32_UCODE_REV:
 	case MSR_IA32_UCODE_WRITE:
 	case MSR_VM_HSAVE_PA:
+	case MSR_AMD64_PATCH_LOADER:
 		break;
 	case 0x200 ... 0x2ff:
 		return set_msr_mtrr(vcpu, msr, data);
-- 
cgit v1.2.3


From dc7e795e3dd2a763e5ceaa1615f307e808cf3932 Mon Sep 17 00:00:00 2001
From: Jan Kiszka <jan.kiszka@web.de>
Date: Wed, 1 Jul 2009 20:52:03 +0200
Subject: Revert "KVM: x86: check for cr3 validity in ioctl_set_sregs"

This reverts commit 6c20e1442bb1c62914bb85b7f4a38973d2a423ba.

To my understanding, it became obsolete with the advent of the more
robust check in mmu_alloc_roots (89da4ff17f). Moreover, it prevents
the conceptually safe pattern

 1. set sregs
 2. register mem-slots
 3. run vcpu

by setting a sticky triple fault during step 1.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/x86.c | 8 +-------
 1 file changed, 1 insertion(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 6dde99ca743..0e74d98641a 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -4326,13 +4326,7 @@ int kvm_arch_vcpu_ioctl_set_sregs(struct kvm_vcpu *vcpu,
 
 	vcpu->arch.cr2 = sregs->cr2;
 	mmu_reset_needed |= vcpu->arch.cr3 != sregs->cr3;
-
-	down_read(&vcpu->kvm->slots_lock);
-	if (gfn_to_memslot(vcpu->kvm, sregs->cr3 >> PAGE_SHIFT))
-		vcpu->arch.cr3 = sregs->cr3;
-	else
-		set_bit(KVM_REQ_TRIPLE_FAULT, &vcpu->requests);
-	up_read(&vcpu->kvm->slots_lock);
+	vcpu->arch.cr3 = sregs->cr3;
 
 	kvm_set_cr8(vcpu, sregs->cr8);
 
-- 
cgit v1.2.3


From 07420171593908406c3a59d6f884d426a921a5ea Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Mon, 6 Jul 2009 12:21:32 +0300
Subject: KVM: MMU: Trace guest pagetable walker

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/mmu.c         |   3 ++
 arch/x86/kvm/mmutrace.h    | 117 +++++++++++++++++++++++++++++++++++++++++++++
 arch/x86/kvm/paging_tmpl.h |  11 +++--
 3 files changed, 128 insertions(+), 3 deletions(-)
 create mode 100644 arch/x86/kvm/mmutrace.h

(limited to 'arch')

diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index b67585c1ef0..c0dda6447b9 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -140,6 +140,9 @@ module_param(oos_shadow, bool, 0644);
 #define ACC_USER_MASK    PT_USER_MASK
 #define ACC_ALL          (ACC_EXEC_MASK | ACC_WRITE_MASK | ACC_USER_MASK)
 
+#define CREATE_TRACE_POINTS
+#include "mmutrace.h"
+
 #define SHADOW_PT_INDEX(addr, level) PT64_INDEX(addr, level)
 
 struct kvm_rmap_desc {
diff --git a/arch/x86/kvm/mmutrace.h b/arch/x86/kvm/mmutrace.h
new file mode 100644
index 00000000000..1367f82717d
--- /dev/null
+++ b/arch/x86/kvm/mmutrace.h
@@ -0,0 +1,117 @@
+#if !defined(_TRACE_KVMMMU_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_KVMMMU_H
+
+#include <linux/tracepoint.h>
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM kvmmmu
+#define TRACE_INCLUDE_PATH .
+#define TRACE_INCLUDE_FILE mmutrace
+
+#define kvm_mmu_trace_pferr_flags       \
+	{ PFERR_PRESENT_MASK, "P" },	\
+	{ PFERR_WRITE_MASK, "W" },	\
+	{ PFERR_USER_MASK, "U" },	\
+	{ PFERR_RSVD_MASK, "RSVD" },	\
+	{ PFERR_FETCH_MASK, "F" }
+
+/*
+ * A pagetable walk has started
+ */
+TRACE_EVENT(
+	kvm_mmu_pagetable_walk,
+	TP_PROTO(u64 addr, int write_fault, int user_fault, int fetch_fault),
+	TP_ARGS(addr, write_fault, user_fault, fetch_fault),
+
+	TP_STRUCT__entry(
+		__field(__u64, addr)
+		__field(__u32, pferr)
+	),
+
+	TP_fast_assign(
+		__entry->addr = addr;
+		__entry->pferr = (!!write_fault << 1) | (!!user_fault << 2)
+		                 | (!!fetch_fault << 4);
+	),
+
+	TP_printk("addr %llx pferr %x %s", __entry->addr, __entry->pferr,
+		  __print_flags(__entry->pferr, "|", kvm_mmu_trace_pferr_flags))
+);
+
+
+/* We just walked a paging element */
+TRACE_EVENT(
+	kvm_mmu_paging_element,
+	TP_PROTO(u64 pte, int level),
+	TP_ARGS(pte, level),
+
+	TP_STRUCT__entry(
+		__field(__u64, pte)
+		__field(__u32, level)
+		),
+
+	TP_fast_assign(
+		__entry->pte = pte;
+		__entry->level = level;
+		),
+
+	TP_printk("pte %llx level %u", __entry->pte, __entry->level)
+);
+
+/* We set a pte accessed bit */
+TRACE_EVENT(
+	kvm_mmu_set_accessed_bit,
+	TP_PROTO(unsigned long table_gfn, unsigned index, unsigned size),
+	TP_ARGS(table_gfn, index, size),
+
+	TP_STRUCT__entry(
+		__field(__u64, gpa)
+		),
+
+	TP_fast_assign(
+		__entry->gpa = ((u64)table_gfn << PAGE_SHIFT)
+				+ index * size;
+		),
+
+	TP_printk("gpa %llx", __entry->gpa)
+);
+
+/* We set a pte dirty bit */
+TRACE_EVENT(
+	kvm_mmu_set_dirty_bit,
+	TP_PROTO(unsigned long table_gfn, unsigned index, unsigned size),
+	TP_ARGS(table_gfn, index, size),
+
+	TP_STRUCT__entry(
+		__field(__u64, gpa)
+		),
+
+	TP_fast_assign(
+		__entry->gpa = ((u64)table_gfn << PAGE_SHIFT)
+				+ index * size;
+		),
+
+	TP_printk("gpa %llx", __entry->gpa)
+);
+
+TRACE_EVENT(
+	kvm_mmu_walker_error,
+	TP_PROTO(u32 pferr),
+	TP_ARGS(pferr),
+
+	TP_STRUCT__entry(
+		__field(__u32, pferr)
+		),
+
+	TP_fast_assign(
+		__entry->pferr = pferr;
+		),
+
+	TP_printk("pferr %x %s", __entry->pferr,
+		  __print_flags(__entry->pferr, "|", kvm_mmu_trace_pferr_flags))
+);
+
+#endif /* _TRACE_KVMMMU_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h
index 53e129cec5f..36ac6d70a84 100644
--- a/arch/x86/kvm/paging_tmpl.h
+++ b/arch/x86/kvm/paging_tmpl.h
@@ -125,13 +125,15 @@ static int FNAME(walk_addr)(struct guest_walker *walker,
 	gpa_t pte_gpa;
 	int rsvd_fault = 0;
 
-	pgprintk("%s: addr %lx\n", __func__, addr);
+	trace_kvm_mmu_pagetable_walk(addr, write_fault, user_fault,
+				     fetch_fault);
 walk:
 	walker->level = vcpu->arch.mmu.root_level;
 	pte = vcpu->arch.cr3;
 #if PTTYPE == 64
 	if (!is_long_mode(vcpu)) {
 		pte = kvm_pdptr_read(vcpu, (addr >> 30) & 3);
+		trace_kvm_mmu_paging_element(pte, walker->level);
 		if (!is_present_gpte(pte))
 			goto not_present;
 		--walker->level;
@@ -150,10 +152,9 @@ walk:
 		pte_gpa += index * sizeof(pt_element_t);
 		walker->table_gfn[walker->level - 1] = table_gfn;
 		walker->pte_gpa[walker->level - 1] = pte_gpa;
-		pgprintk("%s: table_gfn[%d] %lx\n", __func__,
-			 walker->level - 1, table_gfn);
 
 		kvm_read_guest(vcpu->kvm, pte_gpa, &pte, sizeof(pte));
+		trace_kvm_mmu_paging_element(pte, walker->level);
 
 		if (!is_present_gpte(pte))
 			goto not_present;
@@ -175,6 +176,8 @@ walk:
 #endif
 
 		if (!(pte & PT_ACCESSED_MASK)) {
+			trace_kvm_mmu_set_accessed_bit(table_gfn, index,
+						       sizeof(pte));
 			mark_page_dirty(vcpu->kvm, table_gfn);
 			if (FNAME(cmpxchg_gpte)(vcpu->kvm, table_gfn,
 			    index, pte, pte|PT_ACCESSED_MASK))
@@ -208,6 +211,7 @@ walk:
 	if (write_fault && !is_dirty_gpte(pte)) {
 		bool ret;
 
+		trace_kvm_mmu_set_dirty_bit(table_gfn, index, sizeof(pte));
 		mark_page_dirty(vcpu->kvm, table_gfn);
 		ret = FNAME(cmpxchg_gpte)(vcpu->kvm, table_gfn, index, pte,
 			    pte|PT_DIRTY_MASK);
@@ -239,6 +243,7 @@ err:
 		walker->error_code |= PFERR_FETCH_MASK;
 	if (rsvd_fault)
 		walker->error_code |= PFERR_RSVD_MASK;
+	trace_kvm_mmu_walker_error(walker->error_code);
 	return 0;
 }
 
-- 
cgit v1.2.3


From f691fe1da7e2715137d21ae5a80bec64db4625db Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Mon, 6 Jul 2009 15:58:14 +0300
Subject: KVM: Trace shadow page lifecycle

Create, sync, unsync, zap.

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/mmu.c      |  10 +++--
 arch/x86/kvm/mmutrace.h | 103 ++++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 109 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index c0dda6447b9..ac121b39a5b 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -1122,6 +1122,7 @@ static int kvm_sync_page(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp)
 		return 1;
 	}
 
+	trace_kvm_mmu_sync_page(sp);
 	if (rmap_write_protect(vcpu->kvm, sp->gfn))
 		kvm_flush_remote_tlbs(vcpu->kvm);
 	kvm_unlink_unsync_page(vcpu->kvm, sp);
@@ -1244,8 +1245,6 @@ static struct kvm_mmu_page *kvm_mmu_get_page(struct kvm_vcpu *vcpu,
 		quadrant &= (1 << ((PT32_PT_BITS - PT64_PT_BITS) * level)) - 1;
 		role.quadrant = quadrant;
 	}
-	pgprintk("%s: looking gfn %lx role %x\n", __func__,
-		 gfn, role.word);
 	index = kvm_page_table_hashfn(gfn);
 	bucket = &vcpu->kvm->arch.mmu_page_hash[index];
 	hlist_for_each_entry_safe(sp, node, tmp, bucket, hash_link)
@@ -1262,14 +1261,13 @@ static struct kvm_mmu_page *kvm_mmu_get_page(struct kvm_vcpu *vcpu,
 				set_bit(KVM_REQ_MMU_SYNC, &vcpu->requests);
 				kvm_mmu_mark_parents_unsync(vcpu, sp);
 			}
-			pgprintk("%s: found\n", __func__);
+			trace_kvm_mmu_get_page(sp, false);
 			return sp;
 		}
 	++vcpu->kvm->stat.mmu_cache_miss;
 	sp = kvm_mmu_alloc_page(vcpu, parent_pte);
 	if (!sp)
 		return sp;
-	pgprintk("%s: adding gfn %lx role %x\n", __func__, gfn, role.word);
 	sp->gfn = gfn;
 	sp->role = role;
 	hlist_add_head(&sp->hash_link, bucket);
@@ -1282,6 +1280,7 @@ static struct kvm_mmu_page *kvm_mmu_get_page(struct kvm_vcpu *vcpu,
 		vcpu->arch.mmu.prefetch_page(vcpu, sp);
 	else
 		nonpaging_prefetch_page(vcpu, sp);
+	trace_kvm_mmu_get_page(sp, true);
 	return sp;
 }
 
@@ -1410,6 +1409,8 @@ static int mmu_zap_unsync_children(struct kvm *kvm,
 static int kvm_mmu_zap_page(struct kvm *kvm, struct kvm_mmu_page *sp)
 {
 	int ret;
+
+	trace_kvm_mmu_zap_page(sp);
 	++kvm->stat.mmu_shadow_zapped;
 	ret = mmu_zap_unsync_children(kvm, sp);
 	kvm_mmu_page_unlink_children(kvm, sp);
@@ -1656,6 +1657,7 @@ static int kvm_unsync_page(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp)
 	struct kvm_mmu_page *s;
 	struct hlist_node *node, *n;
 
+	trace_kvm_mmu_unsync_page(sp);
 	index = kvm_page_table_hashfn(sp->gfn);
 	bucket = &vcpu->kvm->arch.mmu_page_hash[index];
 	/* don't unsync if pagetable is shadowed with multiple roles */
diff --git a/arch/x86/kvm/mmutrace.h b/arch/x86/kvm/mmutrace.h
index 1367f82717d..3e4a5c6ca2a 100644
--- a/arch/x86/kvm/mmutrace.h
+++ b/arch/x86/kvm/mmutrace.h
@@ -2,12 +2,48 @@
 #define _TRACE_KVMMMU_H
 
 #include <linux/tracepoint.h>
+#include <linux/ftrace_event.h>
 
 #undef TRACE_SYSTEM
 #define TRACE_SYSTEM kvmmmu
 #define TRACE_INCLUDE_PATH .
 #define TRACE_INCLUDE_FILE mmutrace
 
+#define KVM_MMU_PAGE_FIELDS \
+	__field(__u64, gfn) \
+	__field(__u32, role) \
+	__field(__u32, root_count) \
+	__field(__u32, unsync)
+
+#define KVM_MMU_PAGE_ASSIGN(sp)			     \
+	__entry->gfn = sp->gfn;			     \
+	__entry->role = sp->role.word;		     \
+	__entry->root_count = sp->root_count;        \
+	__entry->unsync = sp->unsync;
+
+#define KVM_MMU_PAGE_PRINTK() ({				        \
+	const char *ret = p->buffer + p->len;				\
+	static const char *access_str[] = {			        \
+		"---", "--x", "w--", "w-x", "-u-", "-ux", "wu-", "wux"  \
+	};							        \
+	union kvm_mmu_page_role role;				        \
+								        \
+	role.word = __entry->role;					\
+									\
+	trace_seq_printf(p, "sp gfn %llx %u/%u q%u%s %s%s %spge"	\
+			 " %snxe root %u %s%c",				\
+			 __entry->gfn, role.level, role.glevels,	\
+			 role.quadrant,					\
+			 role.direct ? " direct" : "",			\
+			 access_str[role.access],			\
+			 role.invalid ? " invalid" : "",		\
+			 role.cr4_pge ? "" : "!",			\
+			 role.nxe ? "" : "!",				\
+			 __entry->root_count,				\
+			 __entry->unsync ? "unsync" : "sync", 0);	\
+	ret;								\
+		})
+
 #define kvm_mmu_trace_pferr_flags       \
 	{ PFERR_PRESENT_MASK, "P" },	\
 	{ PFERR_WRITE_MASK, "W" },	\
@@ -111,6 +147,73 @@ TRACE_EVENT(
 		  __print_flags(__entry->pferr, "|", kvm_mmu_trace_pferr_flags))
 );
 
+TRACE_EVENT(
+	kvm_mmu_get_page,
+	TP_PROTO(struct kvm_mmu_page *sp, bool created),
+	TP_ARGS(sp, created),
+
+	TP_STRUCT__entry(
+		KVM_MMU_PAGE_FIELDS
+		__field(bool, created)
+		),
+
+	TP_fast_assign(
+		KVM_MMU_PAGE_ASSIGN(sp)
+		__entry->created = created;
+		),
+
+	TP_printk("%s %s", KVM_MMU_PAGE_PRINTK(),
+		  __entry->created ? "new" : "existing")
+);
+
+TRACE_EVENT(
+	kvm_mmu_sync_page,
+	TP_PROTO(struct kvm_mmu_page *sp),
+	TP_ARGS(sp),
+
+	TP_STRUCT__entry(
+		KVM_MMU_PAGE_FIELDS
+		),
+
+	TP_fast_assign(
+		KVM_MMU_PAGE_ASSIGN(sp)
+		),
+
+	TP_printk("%s", KVM_MMU_PAGE_PRINTK())
+);
+
+TRACE_EVENT(
+	kvm_mmu_unsync_page,
+	TP_PROTO(struct kvm_mmu_page *sp),
+	TP_ARGS(sp),
+
+	TP_STRUCT__entry(
+		KVM_MMU_PAGE_FIELDS
+		),
+
+	TP_fast_assign(
+		KVM_MMU_PAGE_ASSIGN(sp)
+		),
+
+	TP_printk("%s", KVM_MMU_PAGE_PRINTK())
+);
+
+TRACE_EVENT(
+	kvm_mmu_zap_page,
+	TP_PROTO(struct kvm_mmu_page *sp),
+	TP_ARGS(sp),
+
+	TP_STRUCT__entry(
+		KVM_MMU_PAGE_FIELDS
+		),
+
+	TP_fast_assign(
+		KVM_MMU_PAGE_ASSIGN(sp)
+		),
+
+	TP_printk("%s", KVM_MMU_PAGE_PRINTK())
+);
+
 #endif /* _TRACE_KVMMMU_H */
 
 /* This part must be outside protection */
-- 
cgit v1.2.3


From f7c6d140032ae7e80df36d350c6edc41f92b2f94 Mon Sep 17 00:00:00 2001
From: Andre Przywara <andre.przywara@amd.com>
Date: Thu, 2 Jul 2009 15:04:14 +0200
Subject: KVM: fix MMIO_CONF_BASE MSR access

Some Windows versions check whether the BIOS has setup MMI/O for
config space accesses on AMD Fam10h CPUs, we say "no" by returning 0 on
reads and only allow disabling of MMI/O CfgSpace setup by igoring "0" writes.

Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/x86.c | 8 ++++++++
 1 file changed, 8 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 0e74d98641a..95fa45c0f16 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -844,6 +844,13 @@ int kvm_set_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 data)
 			return 1;
 		}
 		break;
+	case MSR_FAM10H_MMIO_CONF_BASE:
+		if (data != 0) {
+			pr_unimpl(vcpu, "unimplemented MMIO_CONF_BASE wrmsr: "
+				"0x%llx\n", data);
+			return 1;
+		}
+		break;
 	case MSR_AMD64_NB_CFG:
 		break;
 	case MSR_IA32_DEBUGCTLMSR:
@@ -1055,6 +1062,7 @@ int kvm_get_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata)
 	case MSR_K7_EVNTSEL0:
 	case MSR_K8_INT_PENDING_MSG:
 	case MSR_AMD64_NB_CFG:
+	case MSR_FAM10H_MMIO_CONF_BASE:
 		data = 0;
 		break;
 	case MSR_MTRRcap:
-- 
cgit v1.2.3


From 1000ff8d893765d7b56e32fe16dbe4814f172588 Mon Sep 17 00:00:00 2001
From: Gleb Natapov <gleb@redhat.com>
Date: Tue, 7 Jul 2009 16:00:57 +0300
Subject: KVM: Add trace points in irqchip code

Add tracepoint in msi/ioapic/pic set_irq() functions,
in IPI sending and in the point where IRQ is placed into
apic's IRR.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/i8259.c |  3 ++
 arch/x86/kvm/lapic.c |  4 +++
 arch/x86/kvm/trace.h | 85 ++++++++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 92 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kvm/i8259.c b/arch/x86/kvm/i8259.c
index 1d1bb75dc7b..e4bcbddecb3 100644
--- a/arch/x86/kvm/i8259.c
+++ b/arch/x86/kvm/i8259.c
@@ -30,6 +30,7 @@
 #include "irq.h"
 
 #include <linux/kvm_host.h>
+#include "trace.h"
 
 static void pic_lock(struct kvm_pic *s)
 	__acquires(&s->lock)
@@ -190,6 +191,8 @@ int kvm_pic_set_irq(void *opaque, int irq, int level)
 	if (irq >= 0 && irq < PIC_NUM_PINS) {
 		ret = pic_set_irq1(&s->pics[irq >> 3], irq & 7, level);
 		pic_update_irq(s);
+		trace_kvm_pic_set_irq(irq >> 3, irq & 7, s->pics[irq >> 3].elcr,
+				      s->pics[irq >> 3].imr, ret == 0);
 	}
 	pic_unlock(s);
 
diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index 6c846030854..5d697602048 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -375,6 +375,8 @@ static int __apic_accept_irq(struct kvm_lapic *apic, int delivery_mode,
 			break;
 
 		result = !apic_test_and_set_irr(vector, apic);
+		trace_kvm_apic_accept_irq(vcpu->vcpu_id, delivery_mode,
+					  trig_mode, vector, result);
 		if (!result) {
 			if (trig_mode)
 				apic_debug("level trig mode repeatedly for "
@@ -493,6 +495,8 @@ static void apic_send_ipi(struct kvm_lapic *apic)
 	else
 		irq.dest_id = GET_APIC_DEST_FIELD(icr_high);
 
+	trace_kvm_apic_ipi(icr_low, irq.dest_id);
+
 	apic_debug("icr_high 0x%x, icr_low 0x%x, "
 		   "short_hand 0x%x, dest 0x%x, trig_mode 0x%x, level 0x%x, "
 		   "dest_mode 0x%x, delivery_mode 0x%x, vector 0x%x\n",
diff --git a/arch/x86/kvm/trace.h b/arch/x86/kvm/trace.h
index 6c2c87fa6e4..0d480e77eac 100644
--- a/arch/x86/kvm/trace.h
+++ b/arch/x86/kvm/trace.h
@@ -264,6 +264,91 @@ TRACE_EVENT(kvm_cr,
 #define trace_kvm_cr_read(cr, val)		trace_kvm_cr(0, cr, val)
 #define trace_kvm_cr_write(cr, val)		trace_kvm_cr(1, cr, val)
 
+TRACE_EVENT(kvm_pic_set_irq,
+	    TP_PROTO(__u8 chip, __u8 pin, __u8 elcr, __u8 imr, bool coalesced),
+	    TP_ARGS(chip, pin, elcr, imr, coalesced),
+
+	TP_STRUCT__entry(
+		__field(	__u8,		chip		)
+		__field(	__u8,		pin		)
+		__field(	__u8,		elcr		)
+		__field(	__u8,		imr		)
+		__field(	bool,		coalesced	)
+	),
+
+	TP_fast_assign(
+		__entry->chip		= chip;
+		__entry->pin		= pin;
+		__entry->elcr		= elcr;
+		__entry->imr		= imr;
+		__entry->coalesced	= coalesced;
+	),
+
+	TP_printk("chip %u pin %u (%s%s)%s",
+		  __entry->chip, __entry->pin,
+		  (__entry->elcr & (1 << __entry->pin)) ? "level":"edge",
+		  (__entry->imr & (1 << __entry->pin)) ? "|masked":"",
+		  __entry->coalesced ? " (coalesced)" : "")
+);
+
+#define kvm_apic_dst_shorthand		\
+	{0x0, "dst"},			\
+	{0x1, "self"},			\
+	{0x2, "all"},			\
+	{0x3, "all-but-self"}
+
+TRACE_EVENT(kvm_apic_ipi,
+	    TP_PROTO(__u32 icr_low, __u32 dest_id),
+	    TP_ARGS(icr_low, dest_id),
+
+	TP_STRUCT__entry(
+		__field(	__u32,		icr_low		)
+		__field(	__u32,		dest_id		)
+	),
+
+	TP_fast_assign(
+		__entry->icr_low	= icr_low;
+		__entry->dest_id	= dest_id;
+	),
+
+	TP_printk("dst %x vec %u (%s|%s|%s|%s|%s)",
+		  __entry->dest_id, (u8)__entry->icr_low,
+		  __print_symbolic((__entry->icr_low >> 8 & 0x7),
+				   kvm_deliver_mode),
+		  (__entry->icr_low & (1<<11)) ? "logical" : "physical",
+		  (__entry->icr_low & (1<<14)) ? "assert" : "de-assert",
+		  (__entry->icr_low & (1<<15)) ? "level" : "edge",
+		  __print_symbolic((__entry->icr_low >> 18 & 0x3),
+				   kvm_apic_dst_shorthand))
+);
+
+TRACE_EVENT(kvm_apic_accept_irq,
+	    TP_PROTO(__u32 apicid, __u16 dm, __u8 tm, __u8 vec, bool coalesced),
+	    TP_ARGS(apicid, dm, tm, vec, coalesced),
+
+	TP_STRUCT__entry(
+		__field(	__u32,		apicid		)
+		__field(	__u16,		dm		)
+		__field(	__u8,		tm		)
+		__field(	__u8,		vec		)
+		__field(	bool,		coalesced	)
+	),
+
+	TP_fast_assign(
+		__entry->apicid		= apicid;
+		__entry->dm		= dm;
+		__entry->tm		= tm;
+		__entry->vec		= vec;
+		__entry->coalesced	= coalesced;
+	),
+
+	TP_printk("apicid %x vec %u (%s|%s)%s",
+		  __entry->apicid, __entry->vec,
+		  __print_symbolic((__entry->dm >> 8 & 0x7), kvm_deliver_mode),
+		  __entry->tm ? "level" : "edge",
+		  __entry->coalesced ? " (coalesced)" : "")
+);
+
 #endif /* _TRACE_KVM_H */
 
 /* This part must be outside protection */
-- 
cgit v1.2.3


From c7f0f24b1f82ec049fcfb8e6d4e1cee2815efbe5 Mon Sep 17 00:00:00 2001
From: Gleb Natapov <gleb@redhat.com>
Date: Tue, 7 Jul 2009 15:27:32 +0300
Subject: KVM: No need to kick cpu if not in a guest mode

This will save a couple of IPIs.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Acked-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/x86.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 95fa45c0f16..e3d9040f215 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -3506,6 +3506,7 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	smp_mb__after_clear_bit();
 
 	if (vcpu->requests || need_resched() || signal_pending(current)) {
+		set_bit(KVM_REQ_KICK, &vcpu->requests);
 		local_irq_enable();
 		preempt_enable();
 		r = 1;
-- 
cgit v1.2.3


From 0d1de2d901f4ba0972a3886496a44fb1d3300dbd Mon Sep 17 00:00:00 2001
From: Gleb Natapov <gleb@redhat.com>
Date: Sun, 12 Jul 2009 16:10:55 +0300
Subject: KVM: Always report x2apic as supported feature

We emulate x2apic in software, so host support is not required.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/x86.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index e3d9040f215..dfb0e37b3c6 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -1504,6 +1504,9 @@ static void do_cpuid_ent(struct kvm_cpuid_entry2 *entry, u32 function,
 	case 1:
 		entry->edx &= kvm_supported_word0_x86_features;
 		entry->ecx &= kvm_supported_word4_x86_features;
+		/* we support x2apic emulation even if host does not support
+		 * it since we emulate x2apic in software */
+		entry->ecx |= F(X2APIC);
 		break;
 	/* function 2 entries are STATEFUL. That is, repeated cpuid commands
 	 * may return different values. This forces us to get_cpu() before
-- 
cgit v1.2.3


From e9f4275732add046fed4a548b8dbb98dbe500d2f Mon Sep 17 00:00:00 2001
From: Beth Kon <eak@us.ibm.com>
Date: Tue, 7 Jul 2009 11:50:38 -0400
Subject: KVM: PIT support for HPET legacy mode

When kvm is in hpet_legacy_mode, the hpet is providing the timer
interrupt and the pit should not be. So in legacy mode, the pit timer
is destroyed, but the *state* of the pit is maintained. So if kvm or
the guest tries to modify the state of the pit, this modification is
accepted, *except* that the timer isn't actually started. When we exit
hpet_legacy_mode, the current state of the pit (which is up to date
since we've been accepting modifications) is used to restart the pit
timer.

The saved_mode code in kvm_pit_load_count temporarily changes mode to
0xff in order to destroy the timer, but then restores the actual
value, again maintaining "current" state of the pit for possible later
reenablement.

[avi: add some reserved storage in the ioctl; make SET_PIT2 IOW]
[marcelo: fix memory corruption due to reserved storage]

Signed-off-by: Beth Kon <eak@us.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/include/asm/kvm.h |  9 +++++++
 arch/x86/kvm/i8254.c       | 22 +++++++++++++----
 arch/x86/kvm/i8254.h       |  3 ++-
 arch/x86/kvm/x86.c         | 59 +++++++++++++++++++++++++++++++++++++++++++++-
 4 files changed, 87 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/kvm.h b/arch/x86/include/asm/kvm.h
index 708b9c32a5d..4a5fe914dc5 100644
--- a/arch/x86/include/asm/kvm.h
+++ b/arch/x86/include/asm/kvm.h
@@ -18,6 +18,7 @@
 #define __KVM_HAVE_GUEST_DEBUG
 #define __KVM_HAVE_MSIX
 #define __KVM_HAVE_MCE
+#define __KVM_HAVE_PIT_STATE2
 
 /* Architectural interrupt line count. */
 #define KVM_NR_INTERRUPTS 256
@@ -237,6 +238,14 @@ struct kvm_pit_state {
 	struct kvm_pit_channel_state channels[3];
 };
 
+#define KVM_PIT_FLAGS_HPET_LEGACY  0x00000001
+
+struct kvm_pit_state2 {
+	struct kvm_pit_channel_state channels[3];
+	__u32 flags;
+	__u32 reserved[9];
+};
+
 struct kvm_reinject_control {
 	__u8 pit_reinject;
 	__u8 reserved[31];
diff --git a/arch/x86/kvm/i8254.c b/arch/x86/kvm/i8254.c
index 8c3ac30ef9b..9b62c57ba6e 100644
--- a/arch/x86/kvm/i8254.c
+++ b/arch/x86/kvm/i8254.c
@@ -332,20 +332,33 @@ static void pit_load_count(struct kvm *kvm, int channel, u32 val)
 	case 1:
         /* FIXME: enhance mode 4 precision */
 	case 4:
-		create_pit_timer(ps, val, 0);
+		if (!(ps->flags & KVM_PIT_FLAGS_HPET_LEGACY)) {
+			create_pit_timer(ps, val, 0);
+		}
 		break;
 	case 2:
 	case 3:
-		create_pit_timer(ps, val, 1);
+		if (!(ps->flags & KVM_PIT_FLAGS_HPET_LEGACY)){
+			create_pit_timer(ps, val, 1);
+		}
 		break;
 	default:
 		destroy_pit_timer(&ps->pit_timer);
 	}
 }
 
-void kvm_pit_load_count(struct kvm *kvm, int channel, u32 val)
+void kvm_pit_load_count(struct kvm *kvm, int channel, u32 val, int hpet_legacy_start)
 {
-	pit_load_count(kvm, channel, val);
+	u8 saved_mode;
+	if (hpet_legacy_start) {
+		/* save existing mode for later reenablement */
+		saved_mode = kvm->arch.vpit->pit_state.channels[0].mode;
+		kvm->arch.vpit->pit_state.channels[0].mode = 0xff; /* disable timer */
+		pit_load_count(kvm, channel, val);
+		kvm->arch.vpit->pit_state.channels[0].mode = saved_mode;
+	} else {
+		pit_load_count(kvm, channel, val);
+	}
 }
 
 static inline struct kvm_pit *dev_to_pit(struct kvm_io_device *dev)
@@ -554,6 +567,7 @@ void kvm_pit_reset(struct kvm_pit *pit)
 	struct kvm_kpit_channel_state *c;
 
 	mutex_lock(&pit->pit_state.lock);
+	pit->pit_state.flags = 0;
 	for (i = 0; i < 3; i++) {
 		c = &pit->pit_state.channels[i];
 		c->mode = 0xff;
diff --git a/arch/x86/kvm/i8254.h b/arch/x86/kvm/i8254.h
index b2670180f22..d4c1c7ffdc0 100644
--- a/arch/x86/kvm/i8254.h
+++ b/arch/x86/kvm/i8254.h
@@ -21,6 +21,7 @@ struct kvm_kpit_channel_state {
 
 struct kvm_kpit_state {
 	struct kvm_kpit_channel_state channels[3];
+	u32 flags;
 	struct kvm_timer pit_timer;
 	bool is_periodic;
 	u32    speaker_data_on;
@@ -49,7 +50,7 @@ struct kvm_pit {
 #define KVM_PIT_CHANNEL_MASK	    0x3
 
 void kvm_inject_pit_timer_irqs(struct kvm_vcpu *vcpu);
-void kvm_pit_load_count(struct kvm *kvm, int channel, u32 val);
+void kvm_pit_load_count(struct kvm *kvm, int channel, u32 val, int hpet_legacy_start);
 struct kvm_pit *kvm_create_pit(struct kvm *kvm, u32 flags);
 void kvm_free_pit(struct kvm *kvm);
 void kvm_pit_reset(struct kvm_pit *pit);
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index dfb0e37b3c6..2214384ff61 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -1213,6 +1213,7 @@ int kvm_dev_ioctl_check_extension(long ext)
 	case KVM_CAP_ASSIGN_DEV_IRQ:
 	case KVM_CAP_IRQFD:
 	case KVM_CAP_PIT2:
+	case KVM_CAP_PIT_STATE2:
 		r = 1;
 		break;
 	case KVM_CAP_COALESCED_MMIO:
@@ -2078,7 +2079,36 @@ static int kvm_vm_ioctl_set_pit(struct kvm *kvm, struct kvm_pit_state *ps)
 
 	mutex_lock(&kvm->arch.vpit->pit_state.lock);
 	memcpy(&kvm->arch.vpit->pit_state, ps, sizeof(struct kvm_pit_state));
-	kvm_pit_load_count(kvm, 0, ps->channels[0].count);
+	kvm_pit_load_count(kvm, 0, ps->channels[0].count, 0);
+	mutex_unlock(&kvm->arch.vpit->pit_state.lock);
+	return r;
+}
+
+static int kvm_vm_ioctl_get_pit2(struct kvm *kvm, struct kvm_pit_state2 *ps)
+{
+	int r = 0;
+
+	mutex_lock(&kvm->arch.vpit->pit_state.lock);
+	memcpy(ps->channels, &kvm->arch.vpit->pit_state.channels,
+		sizeof(ps->channels));
+	ps->flags = kvm->arch.vpit->pit_state.flags;
+	mutex_unlock(&kvm->arch.vpit->pit_state.lock);
+	return r;
+}
+
+static int kvm_vm_ioctl_set_pit2(struct kvm *kvm, struct kvm_pit_state2 *ps)
+{
+	int r = 0, start = 0;
+	u32 prev_legacy, cur_legacy;
+	mutex_lock(&kvm->arch.vpit->pit_state.lock);
+	prev_legacy = kvm->arch.vpit->pit_state.flags & KVM_PIT_FLAGS_HPET_LEGACY;
+	cur_legacy = ps->flags & KVM_PIT_FLAGS_HPET_LEGACY;
+	if (!prev_legacy && cur_legacy)
+		start = 1;
+	memcpy(&kvm->arch.vpit->pit_state.channels, &ps->channels,
+	       sizeof(kvm->arch.vpit->pit_state.channels));
+	kvm->arch.vpit->pit_state.flags = ps->flags;
+	kvm_pit_load_count(kvm, 0, kvm->arch.vpit->pit_state.channels[0].count, start);
 	mutex_unlock(&kvm->arch.vpit->pit_state.lock);
 	return r;
 }
@@ -2140,6 +2170,7 @@ long kvm_arch_vm_ioctl(struct file *filp,
 	 */
 	union {
 		struct kvm_pit_state ps;
+		struct kvm_pit_state2 ps2;
 		struct kvm_memory_alias alias;
 		struct kvm_pit_config pit_config;
 	} u;
@@ -2322,6 +2353,32 @@ long kvm_arch_vm_ioctl(struct file *filp,
 		r = 0;
 		break;
 	}
+	case KVM_GET_PIT2: {
+		r = -ENXIO;
+		if (!kvm->arch.vpit)
+			goto out;
+		r = kvm_vm_ioctl_get_pit2(kvm, &u.ps2);
+		if (r)
+			goto out;
+		r = -EFAULT;
+		if (copy_to_user(argp, &u.ps2, sizeof(u.ps2)))
+			goto out;
+		r = 0;
+		break;
+	}
+	case KVM_SET_PIT2: {
+		r = -EFAULT;
+		if (copy_from_user(&u.ps2, argp, sizeof(u.ps2)))
+			goto out;
+		r = -ENXIO;
+		if (!kvm->arch.vpit)
+			goto out;
+		r = kvm_vm_ioctl_set_pit2(kvm, &u.ps2);
+		if (r)
+			goto out;
+		r = 0;
+		break;
+	}
 	case KVM_REINJECT_CONTROL: {
 		struct kvm_reinject_control control;
 		r =  -EFAULT;
-- 
cgit v1.2.3


From 090b7aff27120cdae76a346a70db394844fea598 Mon Sep 17 00:00:00 2001
From: Gregory Haskins <ghaskins@novell.com>
Date: Tue, 7 Jul 2009 17:08:44 -0400
Subject: KVM: make io_bus interface more robust

Today kvm_io_bus_regsiter_dev() returns void and will internally BUG_ON
if it fails.  We want to create dynamic MMIO/PIO entries driven from
userspace later in the series, so we need to enhance the code to be more
robust with the following changes:

   1) Add a return value to the registration function
   2) Fix up all the callsites to check the return code, handle any
      failures, and percolate the error up to the caller.
   3) Add an unregister function that collapses holes in the array

Signed-off-by: Gregory Haskins <ghaskins@novell.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/i8254.c | 20 ++++++++++++++++++--
 arch/x86/kvm/i8259.c |  9 ++++++++-
 2 files changed, 26 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/i8254.c b/arch/x86/kvm/i8254.c
index 9b62c57ba6e..137e5481710 100644
--- a/arch/x86/kvm/i8254.c
+++ b/arch/x86/kvm/i8254.c
@@ -605,6 +605,7 @@ struct kvm_pit *kvm_create_pit(struct kvm *kvm, u32 flags)
 {
 	struct kvm_pit *pit;
 	struct kvm_kpit_state *pit_state;
+	int ret;
 
 	pit = kzalloc(sizeof(struct kvm_pit), GFP_KERNEL);
 	if (!pit)
@@ -639,14 +640,29 @@ struct kvm_pit *kvm_create_pit(struct kvm *kvm, u32 flags)
 	kvm_register_irq_mask_notifier(kvm, 0, &pit->mask_notifier);
 
 	kvm_iodevice_init(&pit->dev, &pit_dev_ops);
-	__kvm_io_bus_register_dev(&kvm->pio_bus, &pit->dev);
+	ret = __kvm_io_bus_register_dev(&kvm->pio_bus, &pit->dev);
+	if (ret < 0)
+		goto fail;
 
 	if (flags & KVM_PIT_SPEAKER_DUMMY) {
 		kvm_iodevice_init(&pit->speaker_dev, &speaker_dev_ops);
-		__kvm_io_bus_register_dev(&kvm->pio_bus, &pit->speaker_dev);
+		ret = __kvm_io_bus_register_dev(&kvm->pio_bus,
+						&pit->speaker_dev);
+		if (ret < 0)
+			goto fail_unregister;
 	}
 
 	return pit;
+
+fail_unregister:
+	__kvm_io_bus_unregister_dev(&kvm->pio_bus, &pit->dev);
+
+fail:
+	if (pit->irq_source_id >= 0)
+		kvm_free_irq_source_id(kvm, pit->irq_source_id);
+
+	kfree(pit);
+	return NULL;
 }
 
 void kvm_free_pit(struct kvm *kvm)
diff --git a/arch/x86/kvm/i8259.c b/arch/x86/kvm/i8259.c
index e4bcbddecb3..daf4606b029 100644
--- a/arch/x86/kvm/i8259.c
+++ b/arch/x86/kvm/i8259.c
@@ -539,6 +539,8 @@ static const struct kvm_io_device_ops picdev_ops = {
 struct kvm_pic *kvm_create_pic(struct kvm *kvm)
 {
 	struct kvm_pic *s;
+	int ret;
+
 	s = kzalloc(sizeof(struct kvm_pic), GFP_KERNEL);
 	if (!s)
 		return NULL;
@@ -555,6 +557,11 @@ struct kvm_pic *kvm_create_pic(struct kvm *kvm)
 	 * Initialize PIO device
 	 */
 	kvm_iodevice_init(&s->dev, &picdev_ops);
-	kvm_io_bus_register_dev(kvm, &kvm->pio_bus, &s->dev);
+	ret = kvm_io_bus_register_dev(kvm, &kvm->pio_bus, &s->dev);
+	if (ret < 0) {
+		kfree(s);
+		return NULL;
+	}
+
 	return s;
 }
-- 
cgit v1.2.3


From d34e6b175e61821026893ec5298cc8e7558df43a Mon Sep 17 00:00:00 2001
From: Gregory Haskins <ghaskins@novell.com>
Date: Tue, 7 Jul 2009 17:08:49 -0400
Subject: KVM: add ioeventfd support

ioeventfd is a mechanism to register PIO/MMIO regions to trigger an eventfd
signal when written to by a guest.  Host userspace can register any
arbitrary IO address with a corresponding eventfd and then pass the eventfd
to a specific end-point of interest for handling.

Normal IO requires a blocking round-trip since the operation may cause
side-effects in the emulated model or may return data to the caller.
Therefore, an IO in KVM traps from the guest to the host, causes a VMX/SVM
"heavy-weight" exit back to userspace, and is ultimately serviced by qemu's
device model synchronously before returning control back to the vcpu.

However, there is a subclass of IO which acts purely as a trigger for
other IO (such as to kick off an out-of-band DMA request, etc).  For these
patterns, the synchronous call is particularly expensive since we really
only want to simply get our notification transmitted asychronously and
return as quickly as possible.  All the sychronous infrastructure to ensure
proper data-dependencies are met in the normal IO case are just unecessary
overhead for signalling.  This adds additional computational load on the
system, as well as latency to the signalling path.

Therefore, we provide a mechanism for registration of an in-kernel trigger
point that allows the VCPU to only require a very brief, lightweight
exit just long enough to signal an eventfd.  This also means that any
clients compatible with the eventfd interface (which includes userspace
and kernelspace equally well) can now register to be notified. The end
result should be a more flexible and higher performance notification API
for the backend KVM hypervisor and perhipheral components.

To test this theory, we built a test-harness called "doorbell".  This
module has a function called "doorbell_ring()" which simply increments a
counter for each time the doorbell is signaled.  It supports signalling
from either an eventfd, or an ioctl().

We then wired up two paths to the doorbell: One via QEMU via a registered
io region and through the doorbell ioctl().  The other is direct via
ioeventfd.

You can download this test harness here:

ftp://ftp.novell.com/dev/ghaskins/doorbell.tar.bz2

The measured results are as follows:

qemu-mmio:       110000 iops, 9.09us rtt
ioeventfd-mmio: 200100 iops, 5.00us rtt
ioeventfd-pio:  367300 iops, 2.72us rtt

I didn't measure qemu-pio, because I have to figure out how to register a
PIO region with qemu's device model, and I got lazy.  However, for now we
can extrapolate based on the data from the NULLIO runs of +2.56us for MMIO,
and -350ns for HC, we get:

qemu-pio:      153139 iops, 6.53us rtt
ioeventfd-hc: 412585 iops, 2.37us rtt

these are just for fun, for now, until I can gather more data.

Here is a graph for your convenience:

http://developer.novell.com/wiki/images/7/76/Iofd-chart.png

The conclusion to draw is that we save about 4us by skipping the userspace
hop.

--------------------

Signed-off-by: Gregory Haskins <ghaskins@novell.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/x86.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 2214384ff61..42160b031fc 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -1212,6 +1212,7 @@ int kvm_dev_ioctl_check_extension(long ext)
 	case KVM_CAP_IRQ_INJECT_STATUS:
 	case KVM_CAP_ASSIGN_DEV_IRQ:
 	case KVM_CAP_IRQFD:
+	case KVM_CAP_IOEVENTFD:
 	case KVM_CAP_PIT2:
 	case KVM_CAP_PIT_STATE2:
 		r = 1;
-- 
cgit v1.2.3


From a205bc19f0d203f31a15bd2f9464ef05f918b77e Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Thu, 9 Jul 2009 16:36:01 +0200
Subject: KVM: MMU: Fix MMU_DEBUG compile breakage

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/mmu.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index ac121b39a5b..f1f08159e11 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -1808,8 +1808,8 @@ static void mmu_set_spte(struct kvm_vcpu *vcpu, u64 *sptep,
 	pgprintk("%s: setting spte %llx\n", __func__, *sptep);
 	pgprintk("instantiating %s PTE (%s) at %ld (%llx) addr %p\n",
 		 is_large_pte(*sptep)? "2MB" : "4kB",
-		 is_present_pte(*sptep)?"RW":"R", gfn,
-		 *shadow_pte, sptep);
+		 *sptep & PT_PRESENT_MASK ?"RW":"R", gfn,
+		 *sptep, sptep);
 	if (!was_rmapped && is_large_pte(*sptep))
 		++vcpu->kvm->stat.lpages;
 
-- 
cgit v1.2.3


From b59bb7bdf08ee98e0d1f1758901f545655b7a413 Mon Sep 17 00:00:00 2001
From: Gleb Natapov <gleb@redhat.com>
Date: Thu, 9 Jul 2009 15:33:51 +0300
Subject: KVM: Move exception handling to the same place as other events

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/x86.c | 21 +++++++++------------
 1 file changed, 9 insertions(+), 12 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 42160b031fc..11cfd897aac 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -223,13 +223,6 @@ void kvm_queue_exception_e(struct kvm_vcpu *vcpu, unsigned nr, u32 error_code)
 }
 EXPORT_SYMBOL_GPL(kvm_queue_exception_e);
 
-static void __queue_exception(struct kvm_vcpu *vcpu)
-{
-	kvm_x86_ops->queue_exception(vcpu, vcpu->arch.exception.nr,
-				     vcpu->arch.exception.has_error_code,
-				     vcpu->arch.exception.error_code);
-}
-
 /*
  * Load the pae pdptrs.  Return true is they are all valid.
  */
@@ -3491,9 +3484,16 @@ static void update_cr8_intercept(struct kvm_vcpu *vcpu)
 	kvm_x86_ops->update_cr8_intercept(vcpu, tpr, max_irr);
 }
 
-static void inject_pending_irq(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+static void inject_pending_event(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 {
 	/* try to reinject previous events if any */
+	if (vcpu->arch.exception.pending) {
+		kvm_x86_ops->queue_exception(vcpu, vcpu->arch.exception.nr,
+					  vcpu->arch.exception.has_error_code,
+					  vcpu->arch.exception.error_code);
+		return;
+	}
+
 	if (vcpu->arch.nmi_injected) {
 		kvm_x86_ops->set_nmi(vcpu);
 		return;
@@ -3574,10 +3574,7 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 		goto out;
 	}
 
-	if (vcpu->arch.exception.pending)
-		__queue_exception(vcpu);
-	else
-		inject_pending_irq(vcpu, kvm_run);
+	inject_pending_event(vcpu, kvm_run);
 
 	/* enable NMI/IRQ window open exits if needed */
 	if (vcpu->arch.nmi_pending)
-- 
cgit v1.2.3


From 0b71785dc05f1f66e6268022b9953c0d6a9985c6 Mon Sep 17 00:00:00 2001
From: Gleb Natapov <gleb@redhat.com>
Date: Thu, 9 Jul 2009 15:33:53 +0300
Subject: KVM: Move kvm_cpu_get_interrupt() declaration to x86 code

It is implemented only by x86.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/include/asm/kvm_host.h | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index 30b625d8e5f..3f4f00a2353 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -797,5 +797,6 @@ asmlinkage void kvm_handle_fault_on_reboot(void);
 int kvm_unmap_hva(struct kvm *kvm, unsigned long hva);
 int kvm_age_hva(struct kvm *kvm, unsigned long hva);
 int cpuid_maxphyaddr(struct kvm_vcpu *vcpu);
+int kvm_cpu_get_interrupt(struct kvm_vcpu *v);
 
 #endif /* _ASM_X86_KVM_HOST_H */
-- 
cgit v1.2.3


From a1b37100d9e29c1f8dc3e2f5490a205c80180e01 Mon Sep 17 00:00:00 2001
From: Gleb Natapov <gleb@redhat.com>
Date: Thu, 9 Jul 2009 15:33:52 +0300
Subject: KVM: Reduce runnability interface with arch support code

Remove kvm_cpu_has_interrupt() and kvm_arch_interrupt_allowed() from
interface between general code and arch code. kvm_arch_vcpu_runnable()
checks for interrupts instead.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/ia64/kvm/kvm-ia64.c        | 16 ++--------------
 arch/powerpc/kvm/powerpc.c      | 13 +------------
 arch/s390/kvm/interrupt.c       |  8 +-------
 arch/x86/include/asm/kvm_host.h |  2 ++
 arch/x86/kvm/x86.c              |  6 ++++--
 5 files changed, 10 insertions(+), 35 deletions(-)

(limited to 'arch')

diff --git a/arch/ia64/kvm/kvm-ia64.c b/arch/ia64/kvm/kvm-ia64.c
index d7aa6bb8f47..0ad09f05efa 100644
--- a/arch/ia64/kvm/kvm-ia64.c
+++ b/arch/ia64/kvm/kvm-ia64.c
@@ -1935,19 +1935,6 @@ int kvm_highest_pending_irq(struct kvm_vcpu *vcpu)
     return find_highest_bits((int *)&vpd->irr[0]);
 }
 
-int kvm_cpu_has_interrupt(struct kvm_vcpu *vcpu)
-{
-	if (kvm_highest_pending_irq(vcpu) != -1)
-		return 1;
-	return 0;
-}
-
-int kvm_arch_interrupt_allowed(struct kvm_vcpu *vcpu)
-{
-	/* do real check here */
-	return 1;
-}
-
 int kvm_cpu_has_pending_timer(struct kvm_vcpu *vcpu)
 {
 	return vcpu->arch.timer_fired;
@@ -1960,7 +1947,8 @@ gfn_t unalias_gfn(struct kvm *kvm, gfn_t gfn)
 
 int kvm_arch_vcpu_runnable(struct kvm_vcpu *vcpu)
 {
-	return vcpu->arch.mp_state == KVM_MP_STATE_RUNNABLE;
+	return (vcpu->arch.mp_state == KVM_MP_STATE_RUNNABLE) ||
+		(kvm_highest_pending_irq(vcpu) != -1);
 }
 
 int kvm_arch_vcpu_ioctl_get_mpstate(struct kvm_vcpu *vcpu,
diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c
index 0341391eff1..2a4551f78f6 100644
--- a/arch/powerpc/kvm/powerpc.c
+++ b/arch/powerpc/kvm/powerpc.c
@@ -39,20 +39,9 @@ gfn_t unalias_gfn(struct kvm *kvm, gfn_t gfn)
 	return gfn;
 }
 
-int kvm_cpu_has_interrupt(struct kvm_vcpu *v)
-{
-	return !!(v->arch.pending_exceptions);
-}
-
-int kvm_arch_interrupt_allowed(struct kvm_vcpu *vcpu)
-{
-	/* do real check here */
-	return 1;
-}
-
 int kvm_arch_vcpu_runnable(struct kvm_vcpu *v)
 {
-	return !(v->arch.msr & MSR_WE);
+	return !(v->arch.msr & MSR_WE) || !!(v->arch.pending_exceptions);
 }
 
 
diff --git a/arch/s390/kvm/interrupt.c b/arch/s390/kvm/interrupt.c
index 4d613415c43..2c2f9835341 100644
--- a/arch/s390/kvm/interrupt.c
+++ b/arch/s390/kvm/interrupt.c
@@ -283,7 +283,7 @@ static int __try_deliver_ckc_interrupt(struct kvm_vcpu *vcpu)
 	return 1;
 }
 
-int kvm_cpu_has_interrupt(struct kvm_vcpu *vcpu)
+static int kvm_cpu_has_interrupt(struct kvm_vcpu *vcpu)
 {
 	struct kvm_s390_local_interrupt *li = &vcpu->arch.local_int;
 	struct kvm_s390_float_interrupt *fi = vcpu->arch.local_int.float_int;
@@ -320,12 +320,6 @@ int kvm_cpu_has_interrupt(struct kvm_vcpu *vcpu)
 	return rc;
 }
 
-int kvm_arch_interrupt_allowed(struct kvm_vcpu *vcpu)
-{
-	/* do real check here */
-	return 1;
-}
-
 int kvm_cpu_has_pending_timer(struct kvm_vcpu *vcpu)
 {
 	return 0;
diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index 3f4f00a2353..08732d7b6d9 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -797,6 +797,8 @@ asmlinkage void kvm_handle_fault_on_reboot(void);
 int kvm_unmap_hva(struct kvm *kvm, unsigned long hva);
 int kvm_age_hva(struct kvm *kvm, unsigned long hva);
 int cpuid_maxphyaddr(struct kvm_vcpu *vcpu);
+int kvm_cpu_has_interrupt(struct kvm_vcpu *vcpu);
+int kvm_arch_interrupt_allowed(struct kvm_vcpu *vcpu);
 int kvm_cpu_get_interrupt(struct kvm_vcpu *v);
 
 #endif /* _ASM_X86_KVM_HOST_H */
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 11cfd897aac..b87d65d89a0 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -4890,8 +4890,10 @@ void kvm_arch_flush_shadow(struct kvm *kvm)
 int kvm_arch_vcpu_runnable(struct kvm_vcpu *vcpu)
 {
 	return vcpu->arch.mp_state == KVM_MP_STATE_RUNNABLE
-	       || vcpu->arch.mp_state == KVM_MP_STATE_SIPI_RECEIVED
-	       || vcpu->arch.nmi_pending;
+		|| vcpu->arch.mp_state == KVM_MP_STATE_SIPI_RECEIVED
+		|| vcpu->arch.nmi_pending ||
+		(kvm_arch_interrupt_allowed(vcpu) &&
+		 kvm_cpu_has_interrupt(vcpu));
 }
 
 void kvm_vcpu_kick(struct kvm_vcpu *vcpu)
-- 
cgit v1.2.3


From 4088bb3caee82086fd85a844604274f6237f66a7 Mon Sep 17 00:00:00 2001
From: Gleb Natapov <gleb@redhat.com>
Date: Wed, 8 Jul 2009 11:26:54 +0300
Subject: KVM: silence lapic kernel messages that can be triggered by a guest

Some Linux versions (f8) try to read EOI register that is write only.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
---
 arch/x86/kvm/lapic.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index 5d697602048..66122bfc74a 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -597,14 +597,14 @@ static int apic_reg_read(struct kvm_lapic *apic, u32 offset, int len,
 	static const u64 rmask = 0x43ff01ffffffe70cULL;
 
 	if ((alignment + len) > 4) {
-		printk(KERN_ERR "KVM_APIC_READ: alignment error %x %d\n",
-				offset, len);
+		apic_debug("KVM_APIC_READ: alignment error %x %d\n",
+			   offset, len);
 		return 1;
 	}
 
 	if (offset > 0x3f0 || !(rmask & (1ULL << (offset >> 4)))) {
-		printk(KERN_ERR "KVM_APIC_READ: read reserved register %x\n",
-				offset);
+		apic_debug("KVM_APIC_READ: read reserved register %x\n",
+			   offset);
 		return 1;
 	}
 
-- 
cgit v1.2.3


From 3662cb1cd6ed26873ca808f3e16cc54246ad40ca Mon Sep 17 00:00:00 2001
From: Sheng Yang <sheng@linux.intel.com>
Date: Thu, 9 Jul 2009 17:00:42 +0800
Subject: KVM: Discard unnecessary kvm_mmu_flush_tlb() in kvm_mmu_load()

set_cr3() should already cover the TLB flushing.

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
---
 arch/x86/kvm/mmu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index f1f08159e11..87c67f44927 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -2373,8 +2373,8 @@ int kvm_mmu_load(struct kvm_vcpu *vcpu)
 	spin_unlock(&vcpu->kvm->mmu_lock);
 	if (r)
 		goto out;
+	/* set_cr3() should ensure TLB has been flushed */
 	kvm_x86_ops->set_cr3(vcpu, vcpu->arch.mmu.root_hpa);
-	kvm_mmu_flush_tlb(vcpu);
 out:
 	return r;
 }
-- 
cgit v1.2.3


From 6a1ac77110ee3e8d8dfdef8442f3b30b3d83e6a2 Mon Sep 17 00:00:00 2001
From: Marcelo Tosatti <mtosatti@redhat.com>
Date: Wed, 15 Jul 2009 15:34:41 -0300
Subject: KVM: MMU: fix missing locking in alloc_mmu_pages

n_requested_mmu_pages/n_free_mmu_pages are used by
kvm_mmu_change_mmu_pages to calculate the number of pages to zap.

alloc_mmu_pages, called from the vcpu initialization path, modifies this
variables without proper locking, which can result in a negative value
in kvm_mmu_change_mmu_pages (say, with cpu hotplug).

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
---
 arch/x86/kvm/mmu.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 87c67f44927..86c2551fe13 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -2728,12 +2728,14 @@ static int alloc_mmu_pages(struct kvm_vcpu *vcpu)
 
 	ASSERT(vcpu);
 
+	spin_lock(&vcpu->kvm->mmu_lock);
 	if (vcpu->kvm->arch.n_requested_mmu_pages)
 		vcpu->kvm->arch.n_free_mmu_pages =
 					vcpu->kvm->arch.n_requested_mmu_pages;
 	else
 		vcpu->kvm->arch.n_free_mmu_pages =
 					vcpu->kvm->arch.n_alloc_mmu_pages;
+	spin_unlock(&vcpu->kvm->mmu_lock);
 	/*
 	 * When emulating 32-bit mode, cr3 is only 32 bits even on x86_64.
 	 * Therefore we need to allocate shadow page tables in the first
-- 
cgit v1.2.3


From decde80b6a2fedd6ea62ea5c4bc4b3cb9fabf153 Mon Sep 17 00:00:00 2001
From: Gleb Natapov <gleb@redhat.com>
Date: Sun, 12 Jul 2009 17:13:29 +0300
Subject: KVM: s390: remove unused structs

They are not used by common code without defines which s390 does not
have.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
---
 arch/s390/include/asm/kvm.h | 9 ---------
 1 file changed, 9 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/include/asm/kvm.h b/arch/s390/include/asm/kvm.h
index 0b2f829f6d5..3dfcaeb5d7f 100644
--- a/arch/s390/include/asm/kvm.h
+++ b/arch/s390/include/asm/kvm.h
@@ -15,15 +15,6 @@
  */
 #include <linux/types.h>
 
-/* for KVM_GET_IRQCHIP and KVM_SET_IRQCHIP */
-struct kvm_pic_state {
-	/* no PIC for s390 */
-};
-
-struct kvm_ioapic_state {
-	/* no IOAPIC for s390 */
-};
-
 /* for KVM_GET_REGS and KVM_SET_REGS */
 struct kvm_regs {
 	/* general purpose regs for s390 */
-- 
cgit v1.2.3


From 46a359e71526909a18a47aaf4347343d6d1d74b2 Mon Sep 17 00:00:00 2001
From: Akinobu Mita <akinobu.mita@gmail.com>
Date: Sat, 18 Jul 2009 23:58:32 +0900
Subject: KVM: x86: use get_desc_base() and get_desc_limit()

Use get_desc_base() and get_desc_limit() to get the base address and
limit in desc_struct.

Cc: Avi Kivity <avi@redhat.com>
Cc: kvm@vger.kernel.org
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
---
 arch/x86/kvm/x86.c | 18 +++++-------------
 1 file changed, 5 insertions(+), 13 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index b87d65d89a0..6277a316821 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -142,8 +142,7 @@ unsigned long segment_base(u16 selector)
 		table_base = segment_base(ldt_selector);
 	}
 	d = (struct desc_struct *)(table_base + (selector & ~7));
-	v = d->base0 | ((unsigned long)d->base1 << 16) |
-		((unsigned long)d->base2 << 24);
+	v = get_desc_base(d);
 #ifdef CONFIG_X86_64
 	if (d->s == 0 && (d->type == 2 || d->type == 9 || d->type == 11))
 		v |= ((unsigned long)((struct ldttss_desc64 *)d)->base3) << 32;
@@ -3947,11 +3946,8 @@ static void kvm_set_segment(struct kvm_vcpu *vcpu,
 static void seg_desct_to_kvm_desct(struct desc_struct *seg_desc, u16 selector,
 				   struct kvm_segment *kvm_desct)
 {
-	kvm_desct->base = seg_desc->base0;
-	kvm_desct->base |= seg_desc->base1 << 16;
-	kvm_desct->base |= seg_desc->base2 << 24;
-	kvm_desct->limit = seg_desc->limit0;
-	kvm_desct->limit |= seg_desc->limit << 16;
+	kvm_desct->base = get_desc_base(seg_desc);
+	kvm_desct->limit = get_desc_limit(seg_desc);
 	if (seg_desc->g) {
 		kvm_desct->limit <<= 12;
 		kvm_desct->limit |= 0xfff;
@@ -4030,11 +4026,7 @@ static int save_guest_segment_descriptor(struct kvm_vcpu *vcpu, u16 selector,
 static u32 get_tss_base_addr(struct kvm_vcpu *vcpu,
 			     struct desc_struct *seg_desc)
 {
-	u32 base_addr;
-
-	base_addr = seg_desc->base0;
-	base_addr |= (seg_desc->base1 << 16);
-	base_addr |= (seg_desc->base2 << 24);
+	u32 base_addr = get_desc_base(seg_desc);
 
 	return vcpu->arch.mmu.gva_to_gpa(vcpu, base_addr);
 }
@@ -4323,7 +4315,7 @@ int kvm_task_switch(struct kvm_vcpu *vcpu, u16 tss_selector, int reason)
 		}
 	}
 
-	if (!nseg_desc.p || (nseg_desc.limit0 | nseg_desc.limit << 16) < 0x67) {
+	if (!nseg_desc.p || get_desc_limit(&nseg_desc) < 0x67) {
 		kvm_queue_exception_e(vcpu, TS_VECTOR, tss_selector & 0xfffc);
 		return 1;
 	}
-- 
cgit v1.2.3


From b792c344dfd57ee2cf737440e4a9b4a5bc39d1db Mon Sep 17 00:00:00 2001
From: Akinobu Mita <akinobu.mita@gmail.com>
Date: Sun, 19 Jul 2009 00:00:01 +0900
Subject: KVM: x86: use kvm_get_gdt() and kvm_read_ldt()

Use kvm_get_gdt() and kvm_read_ldt() to reduce inline assembly code.

Cc: Avi Kivity <avi@redhat.com>
Cc: kvm@vger.kernel.org
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
---
 arch/x86/kvm/svm.c | 6 +++---
 arch/x86/kvm/x86.c | 5 ++---
 2 files changed, 5 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 8728e514c85..92fc0dab505 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -290,7 +290,7 @@ static void svm_hardware_enable(void *garbage)
 
 	struct svm_cpu_data *svm_data;
 	uint64_t efer;
-	struct desc_ptr gdt_descr;
+	struct descriptor_table gdt_descr;
 	struct desc_struct *gdt;
 	int me = raw_smp_processor_id();
 
@@ -310,8 +310,8 @@ static void svm_hardware_enable(void *garbage)
 	svm_data->max_asid = cpuid_ebx(SVM_CPUID_FUNC) - 1;
 	svm_data->next_asid = svm_data->max_asid + 1;
 
-	asm volatile ("sgdt %0" : "=m"(gdt_descr));
-	gdt = (struct desc_struct *)gdt_descr.address;
+	kvm_get_gdt(&gdt_descr);
+	gdt = (struct desc_struct *)gdt_descr.base;
 	svm_data->tss_desc = (struct kvm_ldttss_desc *)(gdt + GDT_ENTRY_TSS);
 
 	rdmsrl(MSR_EFER, efer);
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 6277a316821..c7ec0c921c0 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -132,13 +132,12 @@ unsigned long segment_base(u16 selector)
 	if (selector == 0)
 		return 0;
 
-	asm("sgdt %0" : "=m"(gdt));
+	kvm_get_gdt(&gdt);
 	table_base = gdt.base;
 
 	if (selector & 4) {           /* from ldt */
-		u16 ldt_selector;
+		u16 ldt_selector = kvm_read_ldt();
 
-		asm("sldt %0" : "=g"(ldt_selector));
 		table_base = segment_base(ldt_selector);
 	}
 	d = (struct desc_struct *)(table_base + (selector & ~7));
-- 
cgit v1.2.3


From b927a3cec081a605142f5b7e90b730611bee28b1 Mon Sep 17 00:00:00 2001
From: Sheng Yang <sheng@linux.intel.com>
Date: Tue, 21 Jul 2009 10:42:48 +0800
Subject: KVM: VMX: Introduce KVM_SET_IDENTITY_MAP_ADDR ioctl

Now KVM allow guest to modify guest's physical address of EPT's identity mapping page.

(change from v1, discard unnecessary check, change ioctl to accept parameter
address rather than value)

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
---
 arch/x86/include/asm/kvm_host.h |  1 +
 arch/x86/kvm/vmx.c              | 15 ++++++++++-----
 arch/x86/kvm/x86.c              | 19 +++++++++++++++++++
 3 files changed, 30 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index 08732d7b6d9..e210b218df4 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -411,6 +411,7 @@ struct kvm_arch{
 
 	struct page *ept_identity_pagetable;
 	bool ept_identity_pagetable_done;
+	gpa_t ept_identity_map_addr;
 
 	unsigned long irq_sources_bitmap;
 	unsigned long irq_states[KVM_IOAPIC_NUM_PINS];
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index c6256b98f07..686e1abb681 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -1719,7 +1719,7 @@ static void vmx_set_cr3(struct kvm_vcpu *vcpu, unsigned long cr3)
 		eptp = construct_eptp(cr3);
 		vmcs_write64(EPT_POINTER, eptp);
 		guest_cr3 = is_paging(vcpu) ? vcpu->arch.cr3 :
-			VMX_EPT_IDENTITY_PAGETABLE_ADDR;
+			vcpu->kvm->arch.ept_identity_map_addr;
 	}
 
 	vmx_flush_tlb(vcpu);
@@ -2122,7 +2122,7 @@ static int init_rmode_identity_map(struct kvm *kvm)
 	if (likely(kvm->arch.ept_identity_pagetable_done))
 		return 1;
 	ret = 0;
-	identity_map_pfn = VMX_EPT_IDENTITY_PAGETABLE_ADDR >> PAGE_SHIFT;
+	identity_map_pfn = kvm->arch.ept_identity_map_addr >> PAGE_SHIFT;
 	r = kvm_clear_guest_page(kvm, identity_map_pfn, 0, PAGE_SIZE);
 	if (r < 0)
 		goto out;
@@ -2191,14 +2191,15 @@ static int alloc_identity_pagetable(struct kvm *kvm)
 		goto out;
 	kvm_userspace_mem.slot = IDENTITY_PAGETABLE_PRIVATE_MEMSLOT;
 	kvm_userspace_mem.flags = 0;
-	kvm_userspace_mem.guest_phys_addr = VMX_EPT_IDENTITY_PAGETABLE_ADDR;
+	kvm_userspace_mem.guest_phys_addr =
+		kvm->arch.ept_identity_map_addr;
 	kvm_userspace_mem.memory_size = PAGE_SIZE;
 	r = __kvm_set_memory_region(kvm, &kvm_userspace_mem, 0);
 	if (r)
 		goto out;
 
 	kvm->arch.ept_identity_pagetable = gfn_to_page(kvm,
-			VMX_EPT_IDENTITY_PAGETABLE_ADDR >> PAGE_SHIFT);
+			kvm->arch.ept_identity_map_addr >> PAGE_SHIFT);
 out:
 	up_write(&kvm->slots_lock);
 	return r;
@@ -3814,9 +3815,13 @@ static struct kvm_vcpu *vmx_create_vcpu(struct kvm *kvm, unsigned int id)
 		if (alloc_apic_access_page(kvm) != 0)
 			goto free_vmcs;
 
-	if (enable_ept)
+	if (enable_ept) {
+		if (!kvm->arch.ept_identity_map_addr)
+			kvm->arch.ept_identity_map_addr =
+				VMX_EPT_IDENTITY_PAGETABLE_ADDR;
 		if (alloc_identity_pagetable(kvm) != 0)
 			goto free_vmcs;
+	}
 
 	return &vmx->vcpu;
 
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index c7ec0c921c0..f4cb1baaa04 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -1206,6 +1206,7 @@ int kvm_dev_ioctl_check_extension(long ext)
 	case KVM_CAP_IOEVENTFD:
 	case KVM_CAP_PIT2:
 	case KVM_CAP_PIT_STATE2:
+	case KVM_CAP_SET_IDENTITY_MAP_ADDR:
 		r = 1;
 		break;
 	case KVM_CAP_COALESCED_MMIO:
@@ -1906,6 +1907,13 @@ static int kvm_vm_ioctl_set_tss_addr(struct kvm *kvm, unsigned long addr)
 	return ret;
 }
 
+static int kvm_vm_ioctl_set_identity_map_addr(struct kvm *kvm,
+					      u64 ident_addr)
+{
+	kvm->arch.ept_identity_map_addr = ident_addr;
+	return 0;
+}
+
 static int kvm_vm_ioctl_set_nr_mmu_pages(struct kvm *kvm,
 					  u32 kvm_nr_mmu_pages)
 {
@@ -2173,6 +2181,17 @@ long kvm_arch_vm_ioctl(struct file *filp,
 		if (r < 0)
 			goto out;
 		break;
+	case KVM_SET_IDENTITY_MAP_ADDR: {
+		u64 ident_addr;
+
+		r = -EFAULT;
+		if (copy_from_user(&ident_addr, argp, sizeof ident_addr))
+			goto out;
+		r = kvm_vm_ioctl_set_identity_map_addr(kvm, ident_addr);
+		if (r < 0)
+			goto out;
+		break;
+	}
 	case KVM_SET_MEMORY_REGION: {
 		struct kvm_memory_region kvm_mem;
 		struct kvm_userspace_memory_region kvm_userspace_mem;
-- 
cgit v1.2.3


From 84fde248fe42f130cdda39faaa8bb1224c6a13ff Mon Sep 17 00:00:00 2001
From: Gleb Natapov <gleb@redhat.com>
Date: Thu, 16 Jul 2009 17:03:30 +0300
Subject: KVM: PIT: Unregister ack notifier callback when freeing

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
---
 arch/x86/kvm/i8254.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kvm/i8254.c b/arch/x86/kvm/i8254.c
index 137e5481710..472653c15a2 100644
--- a/arch/x86/kvm/i8254.c
+++ b/arch/x86/kvm/i8254.c
@@ -672,6 +672,8 @@ void kvm_free_pit(struct kvm *kvm)
 	if (kvm->arch.vpit) {
 		kvm_unregister_irq_mask_notifier(kvm, 0,
 					       &kvm->arch.vpit->mask_notifier);
+		kvm_unregister_irq_ack_notifier(kvm,
+				&kvm->arch.vpit->pit_state.irq_ack_notifier);
 		mutex_lock(&kvm->arch.vpit->pit_state.lock);
 		timer = &kvm->arch.vpit->pit_state.pit_timer.timer;
 		hrtimer_cancel(timer);
-- 
cgit v1.2.3


From 7f582ab6d8116ce8db5792c219a278519deae6ad Mon Sep 17 00:00:00 2001
From: Jan Kiszka <jan.kiszka@web.de>
Date: Wed, 22 Jul 2009 23:53:01 +0200
Subject: KVM: VMX: Avoid to return ENOTSUPP to userland

Choose some allowed error values for the cases VMX returned ENOTSUPP so
far as these values could be returned by the KVM_RUN IOCTL.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
---
 arch/x86/kvm/vmx.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 686e1abb681..c5aaa1b5fdb 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -3133,7 +3133,7 @@ static int handle_apic_access(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 		printk(KERN_ERR
 		       "Fail to handle apic access vmexit! Offset is 0x%lx\n",
 		       offset);
-		return -ENOTSUPP;
+		return -ENOEXEC;
 	}
 	return 1;
 }
@@ -3202,7 +3202,7 @@ static int handle_ept_violation(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 
 	if (exit_qualification & (1 << 6)) {
 		printk(KERN_ERR "EPT: GPA exceeds GAW!\n");
-		return -ENOTSUPP;
+		return -EINVAL;
 	}
 
 	gla_validity = (exit_qualification >> 7) & 0x3;
-- 
cgit v1.2.3


From 5f0269f5d72f622514daec9af158c32e933800b6 Mon Sep 17 00:00:00 2001
From: Mikhail Ershov <arcezed@gmail.com>
Date: Mon, 3 Aug 2009 14:58:25 +0300
Subject: KVM: Align cr8 threshold when userspace changes cr8

Commit f0a3602c20 ("KVM: Move interrupt injection logic to x86.c") does not
update the cr8 intercept if the lapic is disabled, so when userspace updates
cr8, the cr8 threshold control is not updated and we are left with illegal
control fields.

Fix by explicitly resetting the cr8 threshold.

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/x86.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index f4cb1baaa04..69de7248083 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -4445,6 +4445,8 @@ int kvm_arch_vcpu_ioctl_set_sregs(struct kvm_vcpu *vcpu,
 	kvm_set_segment(vcpu, &sregs->tr, VCPU_SREG_TR);
 	kvm_set_segment(vcpu, &sregs->ldt, VCPU_SREG_LDTR);
 
+	update_cr8_intercept(vcpu);
+
 	/* Older userspace won't unhalt the vcpu on reset. */
 	if (kvm_vcpu_is_bsp(vcpu) && kvm_rip_read(vcpu) == 0xfff0 &&
 	    sregs->cs.selector == 0xf000 && sregs->cs.base == 0xffff0000 &&
-- 
cgit v1.2.3


From 1444885a045fe3b1905a14ea1b52540bf556578b Mon Sep 17 00:00:00 2001
From: Marcelo Tosatti <mtosatti@redhat.com>
Date: Mon, 27 Jul 2009 23:41:01 -0300
Subject: KVM: limit lapic periodic timer frequency

Otherwise its possible to starve the host by programming lapic timer
with a very high frequency.

Cc: stable@kernel.org
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/lapic.c | 9 +++++++++
 1 file changed, 9 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index 66122bfc74a..5b9d1ae09ca 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -670,6 +670,15 @@ static void start_apic_timer(struct kvm_lapic *apic)
 
 	if (!apic->lapic_timer.period)
 		return;
+	/*
+	 * Do not allow the guest to program periodic timers with small
+	 * interval, since the hrtimers are not throttled by the host
+	 * scheduler.
+	 */
+	if (apic_lvtt_period(apic)) {
+		if (apic->lapic_timer.period < NSEC_PER_MSEC/2)
+			apic->lapic_timer.period = NSEC_PER_MSEC/2;
+	}
 
 	hrtimer_start(&apic->lapic_timer.timer,
 		      ktime_add_ns(now, apic->lapic_timer.period),
-- 
cgit v1.2.3


From 44ad9944f151390363fc6edaba466de8dfef050f Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Mon, 27 Jul 2009 16:30:42 +0200
Subject: KVM: MMU: make rmap code aware of mapping levels

This patch removes the largepage parameter from the rmap_add function.
Together with rmap_remove this function now uses the role.level field to
find determine if the page is a huge page.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/mmu.c | 53 ++++++++++++++++++++++++++++-------------------------
 1 file changed, 28 insertions(+), 25 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 86c2551fe13..b93ad2c79c1 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -479,19 +479,19 @@ static int is_largepage_backed(struct kvm_vcpu *vcpu, gfn_t large_gfn)
  * Note: gfn must be unaliased before this function get called
  */
 
-static unsigned long *gfn_to_rmap(struct kvm *kvm, gfn_t gfn, int lpage)
+static unsigned long *gfn_to_rmap(struct kvm *kvm, gfn_t gfn, int level)
 {
 	struct kvm_memory_slot *slot;
 	unsigned long idx;
 
 	slot = gfn_to_memslot(kvm, gfn);
-	if (!lpage)
+	if (likely(level == PT_PAGE_TABLE_LEVEL))
 		return &slot->rmap[gfn - slot->base_gfn];
 
-	idx = (gfn / KVM_PAGES_PER_HPAGE(PT_DIRECTORY_LEVEL)) -
-	      (slot->base_gfn / KVM_PAGES_PER_HPAGE(PT_DIRECTORY_LEVEL));
+	idx = (gfn / KVM_PAGES_PER_HPAGE(level)) -
+		(slot->base_gfn / KVM_PAGES_PER_HPAGE(level));
 
-	return &slot->lpage_info[0][idx].rmap_pde;
+	return &slot->lpage_info[level - 2][idx].rmap_pde;
 }
 
 /*
@@ -507,7 +507,7 @@ static unsigned long *gfn_to_rmap(struct kvm *kvm, gfn_t gfn, int lpage)
  * the spte was not added.
  *
  */
-static int rmap_add(struct kvm_vcpu *vcpu, u64 *spte, gfn_t gfn, int lpage)
+static int rmap_add(struct kvm_vcpu *vcpu, u64 *spte, gfn_t gfn)
 {
 	struct kvm_mmu_page *sp;
 	struct kvm_rmap_desc *desc;
@@ -519,7 +519,7 @@ static int rmap_add(struct kvm_vcpu *vcpu, u64 *spte, gfn_t gfn, int lpage)
 	gfn = unalias_gfn(vcpu->kvm, gfn);
 	sp = page_header(__pa(spte));
 	sp->gfns[spte - sp->spt] = gfn;
-	rmapp = gfn_to_rmap(vcpu->kvm, gfn, lpage);
+	rmapp = gfn_to_rmap(vcpu->kvm, gfn, sp->role.level);
 	if (!*rmapp) {
 		rmap_printk("rmap_add: %p %llx 0->1\n", spte, *spte);
 		*rmapp = (unsigned long)spte;
@@ -589,7 +589,7 @@ static void rmap_remove(struct kvm *kvm, u64 *spte)
 		kvm_release_pfn_dirty(pfn);
 	else
 		kvm_release_pfn_clean(pfn);
-	rmapp = gfn_to_rmap(kvm, sp->gfns[spte - sp->spt], is_large_pte(*spte));
+	rmapp = gfn_to_rmap(kvm, sp->gfns[spte - sp->spt], sp->role.level);
 	if (!*rmapp) {
 		printk(KERN_ERR "rmap_remove: %p %llx 0->BUG\n", spte, *spte);
 		BUG();
@@ -652,10 +652,10 @@ static int rmap_write_protect(struct kvm *kvm, u64 gfn)
 {
 	unsigned long *rmapp;
 	u64 *spte;
-	int write_protected = 0;
+	int i, write_protected = 0;
 
 	gfn = unalias_gfn(kvm, gfn);
-	rmapp = gfn_to_rmap(kvm, gfn, 0);
+	rmapp = gfn_to_rmap(kvm, gfn, PT_PAGE_TABLE_LEVEL);
 
 	spte = rmap_next(kvm, rmapp, NULL);
 	while (spte) {
@@ -677,21 +677,24 @@ static int rmap_write_protect(struct kvm *kvm, u64 gfn)
 	}
 
 	/* check for huge page mappings */
-	rmapp = gfn_to_rmap(kvm, gfn, 1);
-	spte = rmap_next(kvm, rmapp, NULL);
-	while (spte) {
-		BUG_ON(!spte);
-		BUG_ON(!(*spte & PT_PRESENT_MASK));
-		BUG_ON((*spte & (PT_PAGE_SIZE_MASK|PT_PRESENT_MASK)) != (PT_PAGE_SIZE_MASK|PT_PRESENT_MASK));
-		pgprintk("rmap_write_protect(large): spte %p %llx %lld\n", spte, *spte, gfn);
-		if (is_writeble_pte(*spte)) {
-			rmap_remove(kvm, spte);
-			--kvm->stat.lpages;
-			__set_spte(spte, shadow_trap_nonpresent_pte);
-			spte = NULL;
-			write_protected = 1;
+	for (i = PT_DIRECTORY_LEVEL;
+	     i < PT_PAGE_TABLE_LEVEL + KVM_NR_PAGE_SIZES; ++i) {
+		rmapp = gfn_to_rmap(kvm, gfn, i);
+		spte = rmap_next(kvm, rmapp, NULL);
+		while (spte) {
+			BUG_ON(!spte);
+			BUG_ON(!(*spte & PT_PRESENT_MASK));
+			BUG_ON((*spte & (PT_PAGE_SIZE_MASK|PT_PRESENT_MASK)) != (PT_PAGE_SIZE_MASK|PT_PRESENT_MASK));
+			pgprintk("rmap_write_protect(large): spte %p %llx %lld\n", spte, *spte, gfn);
+			if (is_writeble_pte(*spte)) {
+				rmap_remove(kvm, spte);
+				--kvm->stat.lpages;
+				__set_spte(spte, shadow_trap_nonpresent_pte);
+				spte = NULL;
+				write_protected = 1;
+			}
+			spte = rmap_next(kvm, rmapp, spte);
 		}
-		spte = rmap_next(kvm, rmapp, spte);
 	}
 
 	return write_protected;
@@ -1815,7 +1818,7 @@ static void mmu_set_spte(struct kvm_vcpu *vcpu, u64 *sptep,
 
 	page_header_update_slot(vcpu->kvm, sptep, gfn);
 	if (!was_rmapped) {
-		rmap_count = rmap_add(vcpu, sptep, gfn, largepage);
+		rmap_count = rmap_add(vcpu, sptep, gfn);
 		if (!is_rmap_spte(*sptep))
 			kvm_release_pfn_clean(pfn);
 		if (rmap_count > RMAP_RECYCLE_THRESHOLD)
-- 
cgit v1.2.3


From d25797b24c0ff2efc2b2fabaebb0ec0cafc0d3e3 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Mon, 27 Jul 2009 16:30:43 +0200
Subject: KVM: MMU: rename is_largepage_backed to mapping_level

With the new name and the corresponding backend changes this function
can now support multiple hugepage sizes.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/mmu.c         | 100 ++++++++++++++++++++++++++++++---------------
 arch/x86/kvm/paging_tmpl.h |   4 +-
 2 files changed, 69 insertions(+), 35 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index b93ad2c79c1..c707936b241 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -393,37 +393,52 @@ static void mmu_free_rmap_desc(struct kvm_rmap_desc *rd)
  * Return the pointer to the largepage write count for a given
  * gfn, handling slots that are not large page aligned.
  */
-static int *slot_largepage_idx(gfn_t gfn, struct kvm_memory_slot *slot)
+static int *slot_largepage_idx(gfn_t gfn,
+			       struct kvm_memory_slot *slot,
+			       int level)
 {
 	unsigned long idx;
 
-	idx = (gfn / KVM_PAGES_PER_HPAGE(PT_DIRECTORY_LEVEL)) -
-	      (slot->base_gfn / KVM_PAGES_PER_HPAGE(PT_DIRECTORY_LEVEL));
-	return &slot->lpage_info[0][idx].write_count;
+	idx = (gfn / KVM_PAGES_PER_HPAGE(level)) -
+	      (slot->base_gfn / KVM_PAGES_PER_HPAGE(level));
+	return &slot->lpage_info[level - 2][idx].write_count;
 }
 
 static void account_shadowed(struct kvm *kvm, gfn_t gfn)
 {
+	struct kvm_memory_slot *slot;
 	int *write_count;
+	int i;
 
 	gfn = unalias_gfn(kvm, gfn);
-	write_count = slot_largepage_idx(gfn,
-					 gfn_to_memslot_unaliased(kvm, gfn));
-	*write_count += 1;
+
+	slot = gfn_to_memslot_unaliased(kvm, gfn);
+	for (i = PT_DIRECTORY_LEVEL;
+	     i < PT_PAGE_TABLE_LEVEL + KVM_NR_PAGE_SIZES; ++i) {
+		write_count   = slot_largepage_idx(gfn, slot, i);
+		*write_count += 1;
+	}
 }
 
 static void unaccount_shadowed(struct kvm *kvm, gfn_t gfn)
 {
+	struct kvm_memory_slot *slot;
 	int *write_count;
+	int i;
 
 	gfn = unalias_gfn(kvm, gfn);
-	write_count = slot_largepage_idx(gfn,
-					 gfn_to_memslot_unaliased(kvm, gfn));
-	*write_count -= 1;
-	WARN_ON(*write_count < 0);
+	for (i = PT_DIRECTORY_LEVEL;
+	     i < PT_PAGE_TABLE_LEVEL + KVM_NR_PAGE_SIZES; ++i) {
+		slot          = gfn_to_memslot_unaliased(kvm, gfn);
+		write_count   = slot_largepage_idx(gfn, slot, i);
+		*write_count -= 1;
+		WARN_ON(*write_count < 0);
+	}
 }
 
-static int has_wrprotected_page(struct kvm *kvm, gfn_t gfn)
+static int has_wrprotected_page(struct kvm *kvm,
+				gfn_t gfn,
+				int level)
 {
 	struct kvm_memory_slot *slot;
 	int *largepage_idx;
@@ -431,47 +446,67 @@ static int has_wrprotected_page(struct kvm *kvm, gfn_t gfn)
 	gfn = unalias_gfn(kvm, gfn);
 	slot = gfn_to_memslot_unaliased(kvm, gfn);
 	if (slot) {
-		largepage_idx = slot_largepage_idx(gfn, slot);
+		largepage_idx = slot_largepage_idx(gfn, slot, level);
 		return *largepage_idx;
 	}
 
 	return 1;
 }
 
-static int host_largepage_backed(struct kvm *kvm, gfn_t gfn)
+static int host_mapping_level(struct kvm *kvm, gfn_t gfn)
 {
+	unsigned long page_size = PAGE_SIZE;
 	struct vm_area_struct *vma;
 	unsigned long addr;
-	int ret = 0;
+	int i, ret = 0;
 
 	addr = gfn_to_hva(kvm, gfn);
 	if (kvm_is_error_hva(addr))
-		return ret;
+		return page_size;
 
 	down_read(&current->mm->mmap_sem);
 	vma = find_vma(current->mm, addr);
-	if (vma && is_vm_hugetlb_page(vma))
-		ret = 1;
+	if (!vma)
+		goto out;
+
+	page_size = vma_kernel_pagesize(vma);
+
+out:
 	up_read(&current->mm->mmap_sem);
 
+	for (i = PT_PAGE_TABLE_LEVEL;
+	     i < (PT_PAGE_TABLE_LEVEL + KVM_NR_PAGE_SIZES); ++i) {
+		if (page_size >= KVM_HPAGE_SIZE(i))
+			ret = i;
+		else
+			break;
+	}
+
 	return ret;
 }
 
-static int is_largepage_backed(struct kvm_vcpu *vcpu, gfn_t large_gfn)
+static int mapping_level(struct kvm_vcpu *vcpu, gfn_t large_gfn)
 {
 	struct kvm_memory_slot *slot;
-
-	if (has_wrprotected_page(vcpu->kvm, large_gfn))
-		return 0;
-
-	if (!host_largepage_backed(vcpu->kvm, large_gfn))
-		return 0;
+	int host_level;
+	int level = PT_PAGE_TABLE_LEVEL;
 
 	slot = gfn_to_memslot(vcpu->kvm, large_gfn);
 	if (slot && slot->dirty_bitmap)
-		return 0;
+		return PT_PAGE_TABLE_LEVEL;
 
-	return 1;
+	host_level = host_mapping_level(vcpu->kvm, large_gfn);
+
+	if (host_level == PT_PAGE_TABLE_LEVEL)
+		return host_level;
+
+	for (level = PT_DIRECTORY_LEVEL; level <= host_level; ++level) {
+
+		if (has_wrprotected_page(vcpu->kvm, large_gfn, level))
+			break;
+	}
+
+	return level - 1;
 }
 
 /*
@@ -1733,7 +1768,7 @@ static int set_spte(struct kvm_vcpu *vcpu, u64 *sptep,
 	if ((pte_access & ACC_WRITE_MASK)
 	    || (write_fault && !is_write_protection(vcpu) && !user_fault)) {
 
-		if (largepage && has_wrprotected_page(vcpu->kvm, gfn)) {
+		if (largepage && has_wrprotected_page(vcpu->kvm, gfn, 1)) {
 			ret = 1;
 			spte = shadow_trap_nonpresent_pte;
 			goto set_pte;
@@ -1884,8 +1919,7 @@ static int nonpaging_map(struct kvm_vcpu *vcpu, gva_t v, int write, gfn_t gfn)
 	pfn_t pfn;
 	unsigned long mmu_seq;
 
-	if (is_largepage_backed(vcpu, gfn &
-			~(KVM_PAGES_PER_HPAGE(PT_DIRECTORY_LEVEL) - 1))) {
+	if (mapping_level(vcpu, gfn) == PT_DIRECTORY_LEVEL) {
 		gfn &= ~(KVM_PAGES_PER_HPAGE(PT_DIRECTORY_LEVEL) - 1);
 		largepage = 1;
 	}
@@ -2091,8 +2125,7 @@ static int tdp_page_fault(struct kvm_vcpu *vcpu, gva_t gpa,
 	if (r)
 		return r;
 
-	if (is_largepage_backed(vcpu, gfn &
-			~(KVM_PAGES_PER_HPAGE(PT_DIRECTORY_LEVEL) - 1))) {
+	if (mapping_level(vcpu, gfn) == PT_DIRECTORY_LEVEL) {
 		gfn &= ~(KVM_PAGES_PER_HPAGE(PT_DIRECTORY_LEVEL) - 1);
 		largepage = 1;
 	}
@@ -2494,7 +2527,8 @@ static void mmu_guess_page_from_pte_write(struct kvm_vcpu *vcpu, gpa_t gpa,
 		return;
 	gfn = (gpte & PT64_BASE_ADDR_MASK) >> PAGE_SHIFT;
 
-	if (is_large_pte(gpte) && is_largepage_backed(vcpu, gfn)) {
+	if (is_large_pte(gpte) &&
+	    (mapping_level(vcpu, gfn) == PT_DIRECTORY_LEVEL)) {
 		gfn &= ~(KVM_PAGES_PER_HPAGE(PT_DIRECTORY_LEVEL) - 1);
 		vcpu->arch.update_pte.largepage = 1;
 	}
diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h
index 36ac6d70a84..44f0346578c 100644
--- a/arch/x86/kvm/paging_tmpl.h
+++ b/arch/x86/kvm/paging_tmpl.h
@@ -407,8 +407,8 @@ static int FNAME(page_fault)(struct kvm_vcpu *vcpu, gva_t addr,
 	if (walker.level == PT_DIRECTORY_LEVEL) {
 		gfn_t large_gfn;
 		large_gfn = walker.gfn &
-			~(KVM_PAGES_PER_HPAGE(PT_DIRECTORY_LEVEL) - 1);
-		if (is_largepage_backed(vcpu, large_gfn)) {
+			    ~(KVM_PAGES_PER_HPAGE(PT_DIRECTORY_LEVEL) - 1);
+		if (mapping_level(vcpu, large_gfn) == PT_DIRECTORY_LEVEL) {
 			walker.gfn = large_gfn;
 			largepage = 1;
 		}
-- 
cgit v1.2.3


From 852e3c19ac64b7c3912e8efe42d3ce090ebc0161 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Mon, 27 Jul 2009 16:30:44 +0200
Subject: KVM: MMU: make direct mapping paths aware of mapping levels

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/include/asm/kvm_host.h |  2 +-
 arch/x86/kvm/mmu.c              | 83 ++++++++++++++++++++++++-----------------
 arch/x86/kvm/paging_tmpl.h      |  6 +--
 3 files changed, 53 insertions(+), 38 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index e210b218df4..e09dc26d96b 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -315,7 +315,7 @@ struct kvm_vcpu_arch {
 	struct {
 		gfn_t gfn;	/* presumed gfn during guest pte update */
 		pfn_t pfn;	/* pfn corresponding to that gfn */
-		int largepage;
+		int level;
 		unsigned long mmu_seq;
 	} update_pte;
 
diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index c707936b241..110c224ed1f 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -257,7 +257,7 @@ static int is_last_spte(u64 pte, int level)
 {
 	if (level == PT_PAGE_TABLE_LEVEL)
 		return 1;
-	if (level == PT_DIRECTORY_LEVEL && is_large_pte(pte))
+	if (is_large_pte(pte))
 		return 1;
 	return 0;
 }
@@ -753,7 +753,7 @@ static int kvm_unmap_rmapp(struct kvm *kvm, unsigned long *rmapp)
 static int kvm_handle_hva(struct kvm *kvm, unsigned long hva,
 			  int (*handler)(struct kvm *kvm, unsigned long *rmapp))
 {
-	int i;
+	int i, j;
 	int retval = 0;
 
 	/*
@@ -772,11 +772,15 @@ static int kvm_handle_hva(struct kvm *kvm, unsigned long hva,
 		end = start + (memslot->npages << PAGE_SHIFT);
 		if (hva >= start && hva < end) {
 			gfn_t gfn_offset = (hva - start) >> PAGE_SHIFT;
-			int idx = gfn_offset /
-			          KVM_PAGES_PER_HPAGE(PT_DIRECTORY_LEVEL);
+
 			retval |= handler(kvm, &memslot->rmap[gfn_offset]);
-			retval |= handler(kvm,
-					&memslot->lpage_info[0][idx].rmap_pde);
+
+			for (j = 0; j < KVM_NR_PAGE_SIZES - 1; ++j) {
+				int idx = gfn_offset;
+				idx /= KVM_PAGES_PER_HPAGE(PT_DIRECTORY_LEVEL + j);
+				retval |= handler(kvm,
+					&memslot->lpage_info[j][idx].rmap_pde);
+			}
 		}
 	}
 
@@ -814,12 +818,15 @@ static int kvm_age_rmapp(struct kvm *kvm, unsigned long *rmapp)
 
 #define RMAP_RECYCLE_THRESHOLD 1000
 
-static void rmap_recycle(struct kvm_vcpu *vcpu, gfn_t gfn, int lpage)
+static void rmap_recycle(struct kvm_vcpu *vcpu, u64 *spte, gfn_t gfn)
 {
 	unsigned long *rmapp;
+	struct kvm_mmu_page *sp;
+
+	sp = page_header(__pa(spte));
 
 	gfn = unalias_gfn(vcpu->kvm, gfn);
-	rmapp = gfn_to_rmap(vcpu->kvm, gfn, lpage);
+	rmapp = gfn_to_rmap(vcpu->kvm, gfn, sp->role.level);
 
 	kvm_unmap_rmapp(vcpu->kvm, rmapp);
 	kvm_flush_remote_tlbs(vcpu->kvm);
@@ -1734,7 +1741,7 @@ static int mmu_need_write_protect(struct kvm_vcpu *vcpu, gfn_t gfn,
 
 static int set_spte(struct kvm_vcpu *vcpu, u64 *sptep,
 		    unsigned pte_access, int user_fault,
-		    int write_fault, int dirty, int largepage,
+		    int write_fault, int dirty, int level,
 		    gfn_t gfn, pfn_t pfn, bool speculative,
 		    bool can_unsync)
 {
@@ -1757,7 +1764,7 @@ static int set_spte(struct kvm_vcpu *vcpu, u64 *sptep,
 		spte |= shadow_nx_mask;
 	if (pte_access & ACC_USER_MASK)
 		spte |= shadow_user_mask;
-	if (largepage)
+	if (level > PT_PAGE_TABLE_LEVEL)
 		spte |= PT_PAGE_SIZE_MASK;
 	if (tdp_enabled)
 		spte |= kvm_x86_ops->get_mt_mask(vcpu, gfn,
@@ -1768,7 +1775,8 @@ static int set_spte(struct kvm_vcpu *vcpu, u64 *sptep,
 	if ((pte_access & ACC_WRITE_MASK)
 	    || (write_fault && !is_write_protection(vcpu) && !user_fault)) {
 
-		if (largepage && has_wrprotected_page(vcpu->kvm, gfn, 1)) {
+		if (level > PT_PAGE_TABLE_LEVEL &&
+		    has_wrprotected_page(vcpu->kvm, gfn, level)) {
 			ret = 1;
 			spte = shadow_trap_nonpresent_pte;
 			goto set_pte;
@@ -1806,7 +1814,7 @@ set_pte:
 static void mmu_set_spte(struct kvm_vcpu *vcpu, u64 *sptep,
 			 unsigned pt_access, unsigned pte_access,
 			 int user_fault, int write_fault, int dirty,
-			 int *ptwrite, int largepage, gfn_t gfn,
+			 int *ptwrite, int level, gfn_t gfn,
 			 pfn_t pfn, bool speculative)
 {
 	int was_rmapped = 0;
@@ -1823,7 +1831,8 @@ static void mmu_set_spte(struct kvm_vcpu *vcpu, u64 *sptep,
 		 * If we overwrite a PTE page pointer with a 2MB PMD, unlink
 		 * the parent of the now unreachable PTE.
 		 */
-		if (largepage && !is_large_pte(*sptep)) {
+		if (level > PT_PAGE_TABLE_LEVEL &&
+		    !is_large_pte(*sptep)) {
 			struct kvm_mmu_page *child;
 			u64 pte = *sptep;
 
@@ -1836,8 +1845,9 @@ static void mmu_set_spte(struct kvm_vcpu *vcpu, u64 *sptep,
 		} else
 			was_rmapped = 1;
 	}
+
 	if (set_spte(vcpu, sptep, pte_access, user_fault, write_fault,
-		      dirty, largepage, gfn, pfn, speculative, true)) {
+		      dirty, level, gfn, pfn, speculative, true)) {
 		if (write_fault)
 			*ptwrite = 1;
 		kvm_x86_ops->tlb_flush(vcpu);
@@ -1857,7 +1867,7 @@ static void mmu_set_spte(struct kvm_vcpu *vcpu, u64 *sptep,
 		if (!is_rmap_spte(*sptep))
 			kvm_release_pfn_clean(pfn);
 		if (rmap_count > RMAP_RECYCLE_THRESHOLD)
-			rmap_recycle(vcpu, gfn, largepage);
+			rmap_recycle(vcpu, sptep, gfn);
 	} else {
 		if (was_writeble)
 			kvm_release_pfn_dirty(pfn);
@@ -1875,7 +1885,7 @@ static void nonpaging_new_cr3(struct kvm_vcpu *vcpu)
 }
 
 static int __direct_map(struct kvm_vcpu *vcpu, gpa_t v, int write,
-			int largepage, gfn_t gfn, pfn_t pfn)
+			int level, gfn_t gfn, pfn_t pfn)
 {
 	struct kvm_shadow_walk_iterator iterator;
 	struct kvm_mmu_page *sp;
@@ -1883,11 +1893,10 @@ static int __direct_map(struct kvm_vcpu *vcpu, gpa_t v, int write,
 	gfn_t pseudo_gfn;
 
 	for_each_shadow_entry(vcpu, (u64)gfn << PAGE_SHIFT, iterator) {
-		if (iterator.level == PT_PAGE_TABLE_LEVEL
-		    || (largepage && iterator.level == PT_DIRECTORY_LEVEL)) {
+		if (iterator.level == level) {
 			mmu_set_spte(vcpu, iterator.sptep, ACC_ALL, ACC_ALL,
 				     0, write, 1, &pt_write,
-				     largepage, gfn, pfn, false);
+				     level, gfn, pfn, false);
 			++vcpu->stat.pf_fixed;
 			break;
 		}
@@ -1915,14 +1924,20 @@ static int __direct_map(struct kvm_vcpu *vcpu, gpa_t v, int write,
 static int nonpaging_map(struct kvm_vcpu *vcpu, gva_t v, int write, gfn_t gfn)
 {
 	int r;
-	int largepage = 0;
+	int level;
 	pfn_t pfn;
 	unsigned long mmu_seq;
 
-	if (mapping_level(vcpu, gfn) == PT_DIRECTORY_LEVEL) {
-		gfn &= ~(KVM_PAGES_PER_HPAGE(PT_DIRECTORY_LEVEL) - 1);
-		largepage = 1;
-	}
+	level = mapping_level(vcpu, gfn);
+
+	/*
+	 * This path builds a PAE pagetable - so we can map 2mb pages at
+	 * maximum. Therefore check if the level is larger than that.
+	 */
+	if (level > PT_DIRECTORY_LEVEL)
+		level = PT_DIRECTORY_LEVEL;
+
+	gfn &= ~(KVM_PAGES_PER_HPAGE(level) - 1);
 
 	mmu_seq = vcpu->kvm->mmu_notifier_seq;
 	smp_rmb();
@@ -1938,7 +1953,7 @@ static int nonpaging_map(struct kvm_vcpu *vcpu, gva_t v, int write, gfn_t gfn)
 	if (mmu_notifier_retry(vcpu, mmu_seq))
 		goto out_unlock;
 	kvm_mmu_free_some_pages(vcpu);
-	r = __direct_map(vcpu, v, write, largepage, gfn, pfn);
+	r = __direct_map(vcpu, v, write, level, gfn, pfn);
 	spin_unlock(&vcpu->kvm->mmu_lock);
 
 
@@ -2114,7 +2129,7 @@ static int tdp_page_fault(struct kvm_vcpu *vcpu, gva_t gpa,
 {
 	pfn_t pfn;
 	int r;
-	int largepage = 0;
+	int level;
 	gfn_t gfn = gpa >> PAGE_SHIFT;
 	unsigned long mmu_seq;
 
@@ -2125,10 +2140,10 @@ static int tdp_page_fault(struct kvm_vcpu *vcpu, gva_t gpa,
 	if (r)
 		return r;
 
-	if (mapping_level(vcpu, gfn) == PT_DIRECTORY_LEVEL) {
-		gfn &= ~(KVM_PAGES_PER_HPAGE(PT_DIRECTORY_LEVEL) - 1);
-		largepage = 1;
-	}
+	level = mapping_level(vcpu, gfn);
+
+	gfn &= ~(KVM_PAGES_PER_HPAGE(level) - 1);
+
 	mmu_seq = vcpu->kvm->mmu_notifier_seq;
 	smp_rmb();
 	pfn = gfn_to_pfn(vcpu->kvm, gfn);
@@ -2141,7 +2156,7 @@ static int tdp_page_fault(struct kvm_vcpu *vcpu, gva_t gpa,
 		goto out_unlock;
 	kvm_mmu_free_some_pages(vcpu);
 	r = __direct_map(vcpu, gpa, error_code & PFERR_WRITE_MASK,
-			 largepage, gfn, pfn);
+			 level, gfn, pfn);
 	spin_unlock(&vcpu->kvm->mmu_lock);
 
 	return r;
@@ -2448,7 +2463,7 @@ static void mmu_pte_write_new_pte(struct kvm_vcpu *vcpu,
 				  const void *new)
 {
 	if (sp->role.level != PT_PAGE_TABLE_LEVEL) {
-		if (!vcpu->arch.update_pte.largepage ||
+		if (vcpu->arch.update_pte.level == PT_PAGE_TABLE_LEVEL ||
 		    sp->role.glevels == PT32_ROOT_LEVEL) {
 			++vcpu->kvm->stat.mmu_pde_zapped;
 			return;
@@ -2498,7 +2513,7 @@ static void mmu_guess_page_from_pte_write(struct kvm_vcpu *vcpu, gpa_t gpa,
 	u64 gpte = 0;
 	pfn_t pfn;
 
-	vcpu->arch.update_pte.largepage = 0;
+	vcpu->arch.update_pte.level = PT_PAGE_TABLE_LEVEL;
 
 	if (bytes != 4 && bytes != 8)
 		return;
@@ -2530,7 +2545,7 @@ static void mmu_guess_page_from_pte_write(struct kvm_vcpu *vcpu, gpa_t gpa,
 	if (is_large_pte(gpte) &&
 	    (mapping_level(vcpu, gfn) == PT_DIRECTORY_LEVEL)) {
 		gfn &= ~(KVM_PAGES_PER_HPAGE(PT_DIRECTORY_LEVEL) - 1);
-		vcpu->arch.update_pte.largepage = 1;
+		vcpu->arch.update_pte.level = PT_DIRECTORY_LEVEL;
 	}
 	vcpu->arch.update_pte.mmu_seq = vcpu->kvm->mmu_notifier_seq;
 	smp_rmb();
diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h
index 44f0346578c..b167f0d57b5 100644
--- a/arch/x86/kvm/paging_tmpl.h
+++ b/arch/x86/kvm/paging_tmpl.h
@@ -253,7 +253,7 @@ static void FNAME(update_pte)(struct kvm_vcpu *vcpu, struct kvm_mmu_page *page,
 	pt_element_t gpte;
 	unsigned pte_access;
 	pfn_t pfn;
-	int largepage = vcpu->arch.update_pte.largepage;
+	int level = vcpu->arch.update_pte.level;
 
 	gpte = *(const pt_element_t *)pte;
 	if (~gpte & (PT_PRESENT_MASK | PT_ACCESSED_MASK)) {
@@ -272,7 +272,7 @@ static void FNAME(update_pte)(struct kvm_vcpu *vcpu, struct kvm_mmu_page *page,
 		return;
 	kvm_get_pfn(pfn);
 	mmu_set_spte(vcpu, spte, page->role.access, pte_access, 0, 0,
-		     gpte & PT_DIRTY_MASK, NULL, largepage,
+		     gpte & PT_DIRTY_MASK, NULL, level,
 		     gpte_to_gfn(gpte), pfn, true);
 }
 
@@ -306,7 +306,7 @@ static u64 *FNAME(fetch)(struct kvm_vcpu *vcpu, gva_t addr,
 				     gw->pte_access & access,
 				     user_fault, write_fault,
 				     gw->ptes[gw->level-1] & PT_DIRTY_MASK,
-				     ptwrite, largepage,
+				     ptwrite, level,
 				     gw->gfn, pfn, false);
 			break;
 		}
-- 
cgit v1.2.3


From e04da980c35d75fa050ba4009ad99025432d8d7d Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Mon, 27 Jul 2009 16:30:45 +0200
Subject: KVM: MMU: make page walker aware of mapping levels

The page walker may be used with nested paging too when accessing mmio
areas.  Make it support the additional page-level too.

[ Marcelo: fix reserved bit check for 1gb pte ]

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/mmu.c         | 17 ++++++++++++++-
 arch/x86/kvm/paging_tmpl.h | 52 +++++++++++++++++++++++++---------------------
 2 files changed, 44 insertions(+), 25 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 110c224ed1f..09ab6433bf1 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -108,6 +108,9 @@ module_param(oos_shadow, bool, 0644);
 
 #define PT32_LEVEL_MASK(level) \
 		(((1ULL << PT32_LEVEL_BITS) - 1) << PT32_LEVEL_SHIFT(level))
+#define PT32_LVL_OFFSET_MASK(level) \
+	(PT32_BASE_ADDR_MASK & ((1ULL << (PAGE_SHIFT + (((level) - 1) \
+						* PT32_LEVEL_BITS))) - 1))
 
 #define PT32_INDEX(address, level)\
 	(((address) >> PT32_LEVEL_SHIFT(level)) & ((1 << PT32_LEVEL_BITS) - 1))
@@ -116,10 +119,19 @@ module_param(oos_shadow, bool, 0644);
 #define PT64_BASE_ADDR_MASK (((1ULL << 52) - 1) & ~(u64)(PAGE_SIZE-1))
 #define PT64_DIR_BASE_ADDR_MASK \
 	(PT64_BASE_ADDR_MASK & ~((1ULL << (PAGE_SHIFT + PT64_LEVEL_BITS)) - 1))
+#define PT64_LVL_ADDR_MASK(level) \
+	(PT64_BASE_ADDR_MASK & ~((1ULL << (PAGE_SHIFT + (((level) - 1) \
+						* PT64_LEVEL_BITS))) - 1))
+#define PT64_LVL_OFFSET_MASK(level) \
+	(PT64_BASE_ADDR_MASK & ((1ULL << (PAGE_SHIFT + (((level) - 1) \
+						* PT64_LEVEL_BITS))) - 1))
 
 #define PT32_BASE_ADDR_MASK PAGE_MASK
 #define PT32_DIR_BASE_ADDR_MASK \
 	(PAGE_MASK & ~((1ULL << (PAGE_SHIFT + PT32_LEVEL_BITS)) - 1))
+#define PT32_LVL_ADDR_MASK(level) \
+	(PAGE_MASK & ~((1ULL << (PAGE_SHIFT + (((level) - 1) \
+					    * PT32_LEVEL_BITS))) - 1))
 
 #define PT64_PERM_MASK (PT_PRESENT_MASK | PT_WRITABLE_MASK | PT_USER_MASK \
 			| PT64_NX_MASK)
@@ -130,6 +142,7 @@ module_param(oos_shadow, bool, 0644);
 #define PFERR_RSVD_MASK (1U << 3)
 #define PFERR_FETCH_MASK (1U << 4)
 
+#define PT_PDPE_LEVEL 3
 #define PT_DIRECTORY_LEVEL 2
 #define PT_PAGE_TABLE_LEVEL 1
 
@@ -2273,7 +2286,9 @@ static void reset_rsvds_bits_mask(struct kvm_vcpu *vcpu, int level)
 		context->rsvd_bits_mask[0][0] = exb_bit_rsvd |
 			rsvd_bits(maxphyaddr, 51);
 		context->rsvd_bits_mask[1][3] = context->rsvd_bits_mask[0][3];
-		context->rsvd_bits_mask[1][2] = context->rsvd_bits_mask[0][2];
+		context->rsvd_bits_mask[1][2] = exb_bit_rsvd |
+			rsvd_bits(maxphyaddr, 51) |
+			rsvd_bits(13, 29);
 		context->rsvd_bits_mask[1][1] = exb_bit_rsvd |
 			rsvd_bits(maxphyaddr, 51) |
 			rsvd_bits(13, 20);		/* large page */
diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h
index b167f0d57b5..578276e34bd 100644
--- a/arch/x86/kvm/paging_tmpl.h
+++ b/arch/x86/kvm/paging_tmpl.h
@@ -27,7 +27,8 @@
 	#define guest_walker guest_walker64
 	#define FNAME(name) paging##64_##name
 	#define PT_BASE_ADDR_MASK PT64_BASE_ADDR_MASK
-	#define PT_DIR_BASE_ADDR_MASK PT64_DIR_BASE_ADDR_MASK
+	#define PT_LVL_ADDR_MASK(lvl) PT64_LVL_ADDR_MASK(lvl)
+	#define PT_LVL_OFFSET_MASK(lvl) PT64_LVL_OFFSET_MASK(lvl)
 	#define PT_INDEX(addr, level) PT64_INDEX(addr, level)
 	#define PT_LEVEL_MASK(level) PT64_LEVEL_MASK(level)
 	#define PT_LEVEL_BITS PT64_LEVEL_BITS
@@ -43,7 +44,8 @@
 	#define guest_walker guest_walker32
 	#define FNAME(name) paging##32_##name
 	#define PT_BASE_ADDR_MASK PT32_BASE_ADDR_MASK
-	#define PT_DIR_BASE_ADDR_MASK PT32_DIR_BASE_ADDR_MASK
+	#define PT_LVL_ADDR_MASK(lvl) PT32_LVL_ADDR_MASK(lvl)
+	#define PT_LVL_OFFSET_MASK(lvl) PT32_LVL_OFFSET_MASK(lvl)
 	#define PT_INDEX(addr, level) PT32_INDEX(addr, level)
 	#define PT_LEVEL_MASK(level) PT32_LEVEL_MASK(level)
 	#define PT_LEVEL_BITS PT32_LEVEL_BITS
@@ -53,8 +55,8 @@
 	#error Invalid PTTYPE value
 #endif
 
-#define gpte_to_gfn FNAME(gpte_to_gfn)
-#define gpte_to_gfn_pde FNAME(gpte_to_gfn_pde)
+#define gpte_to_gfn_lvl FNAME(gpte_to_gfn_lvl)
+#define gpte_to_gfn(pte) gpte_to_gfn_lvl((pte), PT_PAGE_TABLE_LEVEL)
 
 /*
  * The guest_walker structure emulates the behavior of the hardware page
@@ -71,14 +73,9 @@ struct guest_walker {
 	u32 error_code;
 };
 
-static gfn_t gpte_to_gfn(pt_element_t gpte)
+static gfn_t gpte_to_gfn_lvl(pt_element_t gpte, int lvl)
 {
-	return (gpte & PT_BASE_ADDR_MASK) >> PAGE_SHIFT;
-}
-
-static gfn_t gpte_to_gfn_pde(pt_element_t gpte)
-{
-	return (gpte & PT_DIR_BASE_ADDR_MASK) >> PAGE_SHIFT;
+	return (gpte & PT_LVL_ADDR_MASK(lvl)) >> PAGE_SHIFT;
 }
 
 static bool FNAME(cmpxchg_gpte)(struct kvm *kvm,
@@ -189,18 +186,24 @@ walk:
 
 		walker->ptes[walker->level - 1] = pte;
 
-		if (walker->level == PT_PAGE_TABLE_LEVEL) {
-			walker->gfn = gpte_to_gfn(pte);
-			break;
-		}
-
-		if (walker->level == PT_DIRECTORY_LEVEL
-		    && (pte & PT_PAGE_SIZE_MASK)
-		    && (PTTYPE == 64 || is_pse(vcpu))) {
-			walker->gfn = gpte_to_gfn_pde(pte);
-			walker->gfn += PT_INDEX(addr, PT_PAGE_TABLE_LEVEL);
-			if (PTTYPE == 32 && is_cpuid_PSE36())
+		if ((walker->level == PT_PAGE_TABLE_LEVEL) ||
+		    ((walker->level == PT_DIRECTORY_LEVEL) &&
+				(pte & PT_PAGE_SIZE_MASK)  &&
+				(PTTYPE == 64 || is_pse(vcpu))) ||
+		    ((walker->level == PT_PDPE_LEVEL) &&
+				(pte & PT_PAGE_SIZE_MASK)  &&
+				is_long_mode(vcpu))) {
+			int lvl = walker->level;
+
+			walker->gfn = gpte_to_gfn_lvl(pte, lvl);
+			walker->gfn += (addr & PT_LVL_OFFSET_MASK(lvl))
+					>> PAGE_SHIFT;
+
+			if (PTTYPE == 32 &&
+			    walker->level == PT_DIRECTORY_LEVEL &&
+			    is_cpuid_PSE36())
 				walker->gfn += pse36_gfn_delta(pte);
+
 			break;
 		}
 
@@ -609,9 +612,10 @@ static int FNAME(sync_page)(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp)
 #undef PT_BASE_ADDR_MASK
 #undef PT_INDEX
 #undef PT_LEVEL_MASK
-#undef PT_DIR_BASE_ADDR_MASK
+#undef PT_LVL_ADDR_MASK
+#undef PT_LVL_OFFSET_MASK
 #undef PT_LEVEL_BITS
 #undef PT_MAX_FULL_LEVELS
 #undef gpte_to_gfn
-#undef gpte_to_gfn_pde
+#undef gpte_to_gfn_lvl
 #undef CMPXCHG
-- 
cgit v1.2.3


From 7e4e4056f72da51c5dede48515df0ecd20eaf8ca Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Mon, 27 Jul 2009 16:30:46 +0200
Subject: KVM: MMU: shadow support for 1gb pages

This patch adds support for shadow paging to the 1gb page table code in KVM.
With this code the guest can use 1gb pages even if the host does not support
them.

[ Marcelo: fix shadow page collision on pmd level if a guest 1gb page is mapped
           with 4kb ptes on host level ]

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/include/asm/kvm_host.h |  1 -
 arch/x86/kvm/mmu.c              | 14 ++------------
 arch/x86/kvm/paging_tmpl.h      | 43 +++++++++++++++++++----------------------
 3 files changed, 22 insertions(+), 36 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index e09dc26d96b..c9fb2bc13a8 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -315,7 +315,6 @@ struct kvm_vcpu_arch {
 	struct {
 		gfn_t gfn;	/* presumed gfn during guest pte update */
 		pfn_t pfn;	/* pfn corresponding to that gfn */
-		int level;
 		unsigned long mmu_seq;
 	} update_pte;
 
diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 09ab6433bf1..1249c12e1d5 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -2478,11 +2478,8 @@ static void mmu_pte_write_new_pte(struct kvm_vcpu *vcpu,
 				  const void *new)
 {
 	if (sp->role.level != PT_PAGE_TABLE_LEVEL) {
-		if (vcpu->arch.update_pte.level == PT_PAGE_TABLE_LEVEL ||
-		    sp->role.glevels == PT32_ROOT_LEVEL) {
-			++vcpu->kvm->stat.mmu_pde_zapped;
-			return;
-		}
+		++vcpu->kvm->stat.mmu_pde_zapped;
+		return;
         }
 
 	++vcpu->kvm->stat.mmu_pte_updated;
@@ -2528,8 +2525,6 @@ static void mmu_guess_page_from_pte_write(struct kvm_vcpu *vcpu, gpa_t gpa,
 	u64 gpte = 0;
 	pfn_t pfn;
 
-	vcpu->arch.update_pte.level = PT_PAGE_TABLE_LEVEL;
-
 	if (bytes != 4 && bytes != 8)
 		return;
 
@@ -2557,11 +2552,6 @@ static void mmu_guess_page_from_pte_write(struct kvm_vcpu *vcpu, gpa_t gpa,
 		return;
 	gfn = (gpte & PT64_BASE_ADDR_MASK) >> PAGE_SHIFT;
 
-	if (is_large_pte(gpte) &&
-	    (mapping_level(vcpu, gfn) == PT_DIRECTORY_LEVEL)) {
-		gfn &= ~(KVM_PAGES_PER_HPAGE(PT_DIRECTORY_LEVEL) - 1);
-		vcpu->arch.update_pte.level = PT_DIRECTORY_LEVEL;
-	}
 	vcpu->arch.update_pte.mmu_seq = vcpu->kvm->mmu_notifier_seq;
 	smp_rmb();
 	pfn = gfn_to_pfn(vcpu->kvm, gfn);
diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h
index 578276e34bd..d2fec9c12d2 100644
--- a/arch/x86/kvm/paging_tmpl.h
+++ b/arch/x86/kvm/paging_tmpl.h
@@ -256,7 +256,6 @@ static void FNAME(update_pte)(struct kvm_vcpu *vcpu, struct kvm_mmu_page *page,
 	pt_element_t gpte;
 	unsigned pte_access;
 	pfn_t pfn;
-	int level = vcpu->arch.update_pte.level;
 
 	gpte = *(const pt_element_t *)pte;
 	if (~gpte & (PT_PRESENT_MASK | PT_ACCESSED_MASK)) {
@@ -275,7 +274,7 @@ static void FNAME(update_pte)(struct kvm_vcpu *vcpu, struct kvm_mmu_page *page,
 		return;
 	kvm_get_pfn(pfn);
 	mmu_set_spte(vcpu, spte, page->role.access, pte_access, 0, 0,
-		     gpte & PT_DIRTY_MASK, NULL, level,
+		     gpte & PT_DIRTY_MASK, NULL, PT_PAGE_TABLE_LEVEL,
 		     gpte_to_gfn(gpte), pfn, true);
 }
 
@@ -284,7 +283,7 @@ static void FNAME(update_pte)(struct kvm_vcpu *vcpu, struct kvm_mmu_page *page,
  */
 static u64 *FNAME(fetch)(struct kvm_vcpu *vcpu, gva_t addr,
 			 struct guest_walker *gw,
-			 int user_fault, int write_fault, int largepage,
+			 int user_fault, int write_fault, int hlevel,
 			 int *ptwrite, pfn_t pfn)
 {
 	unsigned access = gw->pt_access;
@@ -303,8 +302,7 @@ static u64 *FNAME(fetch)(struct kvm_vcpu *vcpu, gva_t addr,
 	for_each_shadow_entry(vcpu, addr, iterator) {
 		level = iterator.level;
 		sptep = iterator.sptep;
-		if (level == PT_PAGE_TABLE_LEVEL
-		    || (largepage && level == PT_DIRECTORY_LEVEL)) {
+		if (iterator.level == hlevel) {
 			mmu_set_spte(vcpu, sptep, access,
 				     gw->pte_access & access,
 				     user_fault, write_fault,
@@ -323,12 +321,15 @@ static u64 *FNAME(fetch)(struct kvm_vcpu *vcpu, gva_t addr,
 			kvm_flush_remote_tlbs(vcpu->kvm);
 		}
 
-		if (level == PT_DIRECTORY_LEVEL
-		    && gw->level == PT_DIRECTORY_LEVEL) {
+		if (level <= gw->level) {
+			int delta = level - gw->level + 1;
 			direct = 1;
-			if (!is_dirty_gpte(gw->ptes[level - 1]))
+			if (!is_dirty_gpte(gw->ptes[level - delta]))
 				access &= ~ACC_WRITE_MASK;
-			table_gfn = gpte_to_gfn(gw->ptes[level - 1]);
+			table_gfn = gpte_to_gfn(gw->ptes[level - delta]);
+			/* advance table_gfn when emulating 1gb pages with 4k */
+			if (delta == 0)
+				table_gfn += PT_INDEX(addr, level);
 		} else {
 			direct = 0;
 			table_gfn = gw->table_gfn[level - 2];
@@ -381,7 +382,7 @@ static int FNAME(page_fault)(struct kvm_vcpu *vcpu, gva_t addr,
 	int write_pt = 0;
 	int r;
 	pfn_t pfn;
-	int largepage = 0;
+	int level = PT_PAGE_TABLE_LEVEL;
 	unsigned long mmu_seq;
 
 	pgprintk("%s: addr %lx err %x\n", __func__, addr, error_code);
@@ -407,15 +408,11 @@ static int FNAME(page_fault)(struct kvm_vcpu *vcpu, gva_t addr,
 		return 0;
 	}
 
-	if (walker.level == PT_DIRECTORY_LEVEL) {
-		gfn_t large_gfn;
-		large_gfn = walker.gfn &
-			    ~(KVM_PAGES_PER_HPAGE(PT_DIRECTORY_LEVEL) - 1);
-		if (mapping_level(vcpu, large_gfn) == PT_DIRECTORY_LEVEL) {
-			walker.gfn = large_gfn;
-			largepage = 1;
-		}
+	if (walker.level >= PT_DIRECTORY_LEVEL) {
+		level = min(walker.level, mapping_level(vcpu, walker.gfn));
+		walker.gfn = walker.gfn & ~(KVM_PAGES_PER_HPAGE(level) - 1);
 	}
+
 	mmu_seq = vcpu->kvm->mmu_notifier_seq;
 	smp_rmb();
 	pfn = gfn_to_pfn(vcpu->kvm, walker.gfn);
@@ -432,8 +429,7 @@ static int FNAME(page_fault)(struct kvm_vcpu *vcpu, gva_t addr,
 		goto out_unlock;
 	kvm_mmu_free_some_pages(vcpu);
 	sptep = FNAME(fetch)(vcpu, addr, &walker, user_fault, write_fault,
-			     largepage, &write_pt, pfn);
-
+			     level, &write_pt, pfn);
 	pgprintk("%s: shadow pte %p %llx ptwrite %d\n", __func__,
 		 sptep, *sptep, write_pt);
 
@@ -468,8 +464,9 @@ static void FNAME(invlpg)(struct kvm_vcpu *vcpu, gva_t gva)
 		sptep = iterator.sptep;
 
 		/* FIXME: properly handle invlpg on large guest pages */
-		if (level == PT_PAGE_TABLE_LEVEL ||
-		    ((level == PT_DIRECTORY_LEVEL) && is_large_pte(*sptep))) {
+		if (level == PT_PAGE_TABLE_LEVEL  ||
+		    ((level == PT_DIRECTORY_LEVEL && is_large_pte(*sptep))) ||
+		    ((level == PT_PDPE_LEVEL && is_large_pte(*sptep)))) {
 			struct kvm_mmu_page *sp = page_header(__pa(sptep));
 
 			pte_gpa = (sp->gfn << PAGE_SHIFT);
@@ -599,7 +596,7 @@ static int FNAME(sync_page)(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp)
 		nr_present++;
 		pte_access = sp->role.access & FNAME(gpte_access)(vcpu, gpte);
 		set_spte(vcpu, &sp->spt[i], pte_access, 0, 0,
-			 is_dirty_gpte(gpte), 0, gfn,
+			 is_dirty_gpte(gpte), PT_PAGE_TABLE_LEVEL, gfn,
 			 spte_to_pfn(sp->spt[i]), true, false);
 	}
 
-- 
cgit v1.2.3


From 04326caacff2b162d359c15a2edf634448897d1a Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Mon, 27 Jul 2009 16:30:47 +0200
Subject: KVM: MMU: enable gbpages by increasing nr of pagesizes

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/include/asm/kvm_host.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index c9fb2bc13a8..3315efaacf9 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -55,7 +55,7 @@
 #define UNMAPPED_GVA (~(gpa_t)0)
 
 /* KVM Hugepage definitions for x86 */
-#define KVM_NR_PAGE_SIZES	2
+#define KVM_NR_PAGE_SIZES	3
 #define KVM_HPAGE_SHIFT(x)	(PAGE_SHIFT + (((x) - 1) * 9))
 #define KVM_HPAGE_SIZE(x)	(1UL << KVM_HPAGE_SHIFT(x))
 #define KVM_HPAGE_MASK(x)	(~(KVM_HPAGE_SIZE(x) - 1))
-- 
cgit v1.2.3


From 344f414fa0f16254dd07195d4cd11b2f92931d3d Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Mon, 27 Jul 2009 16:30:48 +0200
Subject: KVM: report 1GB page support to userspace

If userspace knows that the kernel part supports 1GB pages it can enable
the corresponding cpuid bit so that guests actually use GB pages.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/include/asm/kvm_host.h | 2 ++
 arch/x86/kvm/svm.c              | 6 ++++++
 arch/x86/kvm/vmx.c              | 6 ++++++
 arch/x86/kvm/x86.c              | 3 ++-
 4 files changed, 16 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index 3315efaacf9..b17d845897b 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -528,6 +528,8 @@ struct kvm_x86_ops {
 	int (*set_tss_addr)(struct kvm *kvm, unsigned int addr);
 	int (*get_tdp_level)(void);
 	u64 (*get_mt_mask)(struct kvm_vcpu *vcpu, gfn_t gfn, bool is_mmio);
+	bool (*gb_page_enable)(void);
+
 	const struct trace_print_flags *exit_reasons_str;
 };
 
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 92fc0dab505..10e718db990 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -2754,6 +2754,11 @@ static const struct trace_print_flags svm_exit_reasons_str[] = {
 	{ -1, NULL }
 };
 
+static bool svm_gb_page_enable(void)
+{
+	return true;
+}
+
 static struct kvm_x86_ops svm_x86_ops = {
 	.cpu_has_kvm_support = has_svm,
 	.disabled_by_bios = is_disabled,
@@ -2817,6 +2822,7 @@ static struct kvm_x86_ops svm_x86_ops = {
 	.get_mt_mask = svm_get_mt_mask,
 
 	.exit_reasons_str = svm_exit_reasons_str,
+	.gb_page_enable = svm_gb_page_enable,
 };
 
 static int __init svm_init(void)
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index c5aaa1b5fdb..32e6d2031ba 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -3908,6 +3908,11 @@ static const struct trace_print_flags vmx_exit_reasons_str[] = {
 	{ -1, NULL }
 };
 
+static bool vmx_gb_page_enable(void)
+{
+	return false;
+}
+
 static struct kvm_x86_ops vmx_x86_ops = {
 	.cpu_has_kvm_support = cpu_has_kvm_support,
 	.disabled_by_bios = vmx_disabled_by_bios,
@@ -3969,6 +3974,7 @@ static struct kvm_x86_ops vmx_x86_ops = {
 	.get_mt_mask = vmx_get_mt_mask,
 
 	.exit_reasons_str = vmx_exit_reasons_str,
+	.gb_page_enable = vmx_gb_page_enable,
 };
 
 static int __init vmx_init(void)
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 69de7248083..fa525d511d9 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -1444,6 +1444,7 @@ static void do_cpuid_ent(struct kvm_cpuid_entry2 *entry, u32 function,
 			 u32 index, int *nent, int maxnent)
 {
 	unsigned f_nx = is_efer_nx() ? F(NX) : 0;
+	unsigned f_gbpages = kvm_x86_ops->gb_page_enable() ? F(GBPAGES) : 0;
 #ifdef CONFIG_X86_64
 	unsigned f_lm = F(LM);
 #else
@@ -1468,7 +1469,7 @@ static void do_cpuid_ent(struct kvm_cpuid_entry2 *entry, u32 function,
 		F(MTRR) | F(PGE) | F(MCA) | F(CMOV) |
 		F(PAT) | F(PSE36) | 0 /* Reserved */ |
 		f_nx | 0 /* Reserved */ | F(MMXEXT) | F(MMX) |
-		F(FXSR) | F(FXSR_OPT) | 0 /* GBPAGES */ | 0 /* RDTSCP */ |
+		F(FXSR) | F(FXSR_OPT) | f_gbpages | 0 /* RDTSCP */ |
 		0 /* Reserved */ | f_lm | F(3DNOWEXT) | F(3DNOW);
 	/* cpuid 1.ecx */
 	const u32 kvm_supported_word4_x86_features =
-- 
cgit v1.2.3


From 95fb4eb6981216c07ac01f598e61b273b6eff58c Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Wed, 29 Jul 2009 00:46:38 +0200
Subject: KVM: remove superfluous NULL pointer check in
 kvm_inject_pit_timer_irqs()

This takes care of the following entries from Dan's list:

arch/x86/kvm/i8254.c +714 kvm_inject_pit_timer_irqs(6) warning: variable derefenced in initializer 'vcpu'
arch/x86/kvm/i8254.c +714 kvm_inject_pit_timer_irqs(6) warning: variable derefenced before check 'vcpu'

Reported-by: Dan Carpenter <error27@gmail.com>
Cc: corbet@lwn.net
Cc: eteo@redhat.com
Cc: Julia Lawall <julia@diku.dk>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Acked-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/i8254.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/i8254.c b/arch/x86/kvm/i8254.c
index 472653c15a2..82ad523b490 100644
--- a/arch/x86/kvm/i8254.c
+++ b/arch/x86/kvm/i8254.c
@@ -713,7 +713,7 @@ void kvm_inject_pit_timer_irqs(struct kvm_vcpu *vcpu)
 	struct kvm *kvm = vcpu->kvm;
 	struct kvm_kpit_state *ps;
 
-	if (vcpu && pit) {
+	if (pit) {
 		int inject = 0;
 		ps = &pit->pit_state;
 
-- 
cgit v1.2.3


From 3b80fffe2b31fb716d3ebe729c54464ee7856723 Mon Sep 17 00:00:00 2001
From: Izik Eidus <ieidus@redhat.com>
Date: Tue, 28 Jul 2009 15:26:58 -0300
Subject: KVM: MMU: make __kvm_mmu_free_some_pages handle empty list

First check if the list is empty before attempting to look at list
entries.

Cc: stable@kernel.org
Signed-off-by: Izik Eidus <ieidus@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/mmu.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 1249c12e1d5..28be35c6ff1 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -2705,7 +2705,8 @@ EXPORT_SYMBOL_GPL(kvm_mmu_unprotect_page_virt);
 
 void __kvm_mmu_free_some_pages(struct kvm_vcpu *vcpu)
 {
-	while (vcpu->kvm->arch.n_free_mmu_pages < KVM_REFILL_PAGES) {
+	while (vcpu->kvm->arch.n_free_mmu_pages < KVM_REFILL_PAGES &&
+	       !list_empty(&vcpu->kvm->arch.active_mmu_pages)) {
 		struct kvm_mmu_page *sp;
 
 		sp = container_of(vcpu->kvm->arch.active_mmu_pages.prev,
-- 
cgit v1.2.3


From b90c062c65cc8839edfac39778a37a55ca9bda36 Mon Sep 17 00:00:00 2001
From: Marcelo Tosatti <mtosatti@redhat.com>
Date: Tue, 28 Jul 2009 15:26:59 -0300
Subject: KVM: MMU: fix bogus alloc_mmu_pages assignment

Remove the bogus n_free_mmu_pages assignment from alloc_mmu_pages.

It breaks accounting of mmu pages, since n_free_mmu_pages is modified
but the real number of pages remains the same.

Cc: stable@kernel.org
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/mmu.c | 8 --------
 1 file changed, 8 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 28be35c6ff1..6f38178af92 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -2786,14 +2786,6 @@ static int alloc_mmu_pages(struct kvm_vcpu *vcpu)
 
 	ASSERT(vcpu);
 
-	spin_lock(&vcpu->kvm->mmu_lock);
-	if (vcpu->kvm->arch.n_requested_mmu_pages)
-		vcpu->kvm->arch.n_free_mmu_pages =
-					vcpu->kvm->arch.n_requested_mmu_pages;
-	else
-		vcpu->kvm->arch.n_free_mmu_pages =
-					vcpu->kvm->arch.n_alloc_mmu_pages;
-	spin_unlock(&vcpu->kvm->mmu_lock);
 	/*
 	 * When emulating 32-bit mode, cr3 is only 32 bits even on x86_64.
 	 * Therefore we need to allocate shadow page tables in the first
-- 
cgit v1.2.3


From 07708c4af1346ab1521b26a202f438366b7bcffd Mon Sep 17 00:00:00 2001
From: Jan Kiszka <jan.kiszka@siemens.com>
Date: Mon, 3 Aug 2009 18:43:28 +0200
Subject: KVM: x86: Disallow hypercalls for guest callers in rings > 0

So far unprivileged guest callers running in ring 3 can issue, e.g., MMU
hypercalls. Normally, such callers cannot provide any hand-crafted MMU
command structure as it has to be passed by its physical address, but
they can still crash the guest kernel by passing random addresses.

To close the hole, this patch considers hypercalls valid only if issued
from guest ring 0. This may still be relaxed on a per-hypercall base in
the future once required.

Cc: stable@kernel.org
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/x86.c | 6 ++++++
 1 file changed, 6 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index fa525d511d9..92b5eddaa87 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -3213,6 +3213,11 @@ int kvm_emulate_hypercall(struct kvm_vcpu *vcpu)
 		a3 &= 0xFFFFFFFF;
 	}
 
+	if (kvm_x86_ops->get_cpl(vcpu) != 0) {
+		ret = -KVM_EPERM;
+		goto out;
+	}
+
 	switch (nr) {
 	case KVM_HC_VAPIC_POLL_IRQ:
 		ret = 0;
@@ -3224,6 +3229,7 @@ int kvm_emulate_hypercall(struct kvm_vcpu *vcpu)
 		ret = -KVM_ENOSYS;
 		break;
 	}
+out:
 	kvm_register_write(vcpu, VCPU_REGS_RAX, ret);
 	++vcpu->stat.hypercalls;
 	return r;
-- 
cgit v1.2.3


From eab4b8aa34fc64e3a91358e1612e6d059396193b Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Tue, 4 Aug 2009 15:02:54 +0300
Subject: KVM: VMX: Optimize vmx_get_cpl()

Instead of calling vmx_get_segment() (which reads a whole bunch of
vmcs fields), read only the cs selector which contains the cpl.

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/vmx.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 32e6d2031ba..0ba706e87c5 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -1773,16 +1773,13 @@ static void vmx_get_segment(struct kvm_vcpu *vcpu,
 
 static int vmx_get_cpl(struct kvm_vcpu *vcpu)
 {
-	struct kvm_segment kvm_seg;
-
 	if (!(vcpu->arch.cr0 & X86_CR0_PE)) /* if real mode */
 		return 0;
 
 	if (vmx_get_rflags(vcpu) & X86_EFLAGS_VM) /* if virtual 8086 */
 		return 3;
 
-	vmx_get_segment(vcpu, &kvm_seg, VCPU_SREG_CS);
-	return kvm_seg.selector & 3;
+	return vmcs_read16(GUEST_CS_SELECTOR) & 3;
 }
 
 static u32 vmx_segment_access_rights(struct kvm_segment *var)
-- 
cgit v1.2.3


From 1f3ee616dd21ff155f781c35509229bf2788c072 Mon Sep 17 00:00:00 2001
From: Amit Shah <amit.shah@redhat.com>
Date: Tue, 30 Jun 2009 16:24:28 +0530
Subject: KVM: ignore reads to perfctr msrs

We ignore writes to the perfctr msrs. Ignore reads as well.

Kaspersky antivirus crashes Windows guests if it can't read
these MSRs.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/x86.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 92b5eddaa87..132c5100d4f 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -1048,9 +1048,12 @@ int kvm_get_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata)
 	case MSR_K8_SYSCFG:
 	case MSR_K7_HWCR:
 	case MSR_VM_HSAVE_PA:
+	case MSR_P6_PERFCTR0:
+	case MSR_P6_PERFCTR1:
 	case MSR_P6_EVNTSEL0:
 	case MSR_P6_EVNTSEL1:
 	case MSR_K7_EVNTSEL0:
+	case MSR_K7_PERFCTR0:
 	case MSR_K8_INT_PENDING_MSG:
 	case MSR_AMD64_NB_CFG:
 	case MSR_FAM10H_MMIO_CONF_BASE:
-- 
cgit v1.2.3


From 3a34a8810b2ed316bfe58fa53640e8d30de3f6c2 Mon Sep 17 00:00:00 2001
From: Roel Kluin <roel.kluin@gmail.com>
Date: Tue, 4 Aug 2009 02:08:45 -0700
Subject: KVM: fix EFER read buffer overflow

Check whether index is within bounds before grabbing the element.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: Avi Kivity <avi@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/vmx.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 0ba706e87c5..31c3a8740c4 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -571,12 +571,15 @@ static void reload_tss(void)
 static void load_transition_efer(struct vcpu_vmx *vmx)
 {
 	int efer_offset = vmx->msr_offset_efer;
-	u64 host_efer = vmx->host_msrs[efer_offset].data;
-	u64 guest_efer = vmx->guest_msrs[efer_offset].data;
+	u64 host_efer;
+	u64 guest_efer;
 	u64 ignore_bits;
 
 	if (efer_offset < 0)
 		return;
+	host_efer = vmx->host_msrs[efer_offset].data;
+	guest_efer = vmx->guest_msrs[efer_offset].data;
+
 	/*
 	 * NX is emulated; LMA and LME handled by hardware; SCE meaninless
 	 * outside long mode
-- 
cgit v1.2.3


From 956f97cf665dc8c8ce2d5138bb38c022673b12d7 Mon Sep 17 00:00:00 2001
From: Gleb Natapov <gleb@redhat.com>
Date: Tue, 4 Aug 2009 15:30:27 +0300
Subject: KVM: Call kvm_vcpu_kick() inside pic spinlock

d5ecfdd25 moved it out because back than it was impossible to
call it inside spinlock. This restriction no longer exists.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/i8259.c | 10 +---------
 arch/x86/kvm/irq.h   |  1 -
 2 files changed, 1 insertion(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/i8259.c b/arch/x86/kvm/i8259.c
index daf4606b029..d27320c8d46 100644
--- a/arch/x86/kvm/i8259.c
+++ b/arch/x86/kvm/i8259.c
@@ -43,11 +43,9 @@ static void pic_unlock(struct kvm_pic *s)
 {
 	struct kvm *kvm = s->kvm;
 	unsigned acks = s->pending_acks;
-	bool wakeup = s->wakeup_needed;
 	struct kvm_vcpu *vcpu;
 
 	s->pending_acks = 0;
-	s->wakeup_needed = false;
 
 	spin_unlock(&s->lock);
 
@@ -56,12 +54,6 @@ static void pic_unlock(struct kvm_pic *s)
 				     __ffs(acks));
 		acks &= acks - 1;
 	}
-
-	if (wakeup) {
-		vcpu = s->kvm->bsp_vcpu;
-		if (vcpu)
-			kvm_vcpu_kick(vcpu);
-	}
 }
 
 static void pic_clear_isr(struct kvm_kpic_state *s, int irq)
@@ -527,7 +519,7 @@ static void pic_irq_request(void *opaque, int level)
 	s->output = level;
 	if (vcpu && level && (s->pics[0].isr_ack & (1 << irq))) {
 		s->pics[0].isr_ack &= ~(1 << irq);
-		s->wakeup_needed = true;
+		kvm_vcpu_kick(vcpu);
 	}
 }
 
diff --git a/arch/x86/kvm/irq.h b/arch/x86/kvm/irq.h
index 9f593188129..7d6058a2fd3 100644
--- a/arch/x86/kvm/irq.h
+++ b/arch/x86/kvm/irq.h
@@ -63,7 +63,6 @@ struct kvm_kpic_state {
 
 struct kvm_pic {
 	spinlock_t lock;
-	bool wakeup_needed;
 	unsigned pending_acks;
 	struct kvm *kvm;
 	struct kvm_kpic_state pics[2]; /* 0 is master pic, 1 is slave pic */
-- 
cgit v1.2.3


From 938396a2341a4a96eaa5bea93a2bcdd69827c70c Mon Sep 17 00:00:00 2001
From: Gleb Natapov <gleb@redhat.com>
Date: Tue, 4 Aug 2009 15:30:28 +0300
Subject: KVM: Call ack notifiers from PIC when guest OS acks an IRQ.

Currently they are called when irq vector is been delivered.  Calling ack
notifiers at this point is wrong.  Device assignment ack notifier enables
host interrupts, but guest not yet had a chance to clear interrupt
condition in a device.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/i8259.c | 18 ++++--------------
 1 file changed, 4 insertions(+), 14 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/i8259.c b/arch/x86/kvm/i8259.c
index d27320c8d46..3aacd331e2d 100644
--- a/arch/x86/kvm/i8259.c
+++ b/arch/x86/kvm/i8259.c
@@ -41,25 +41,16 @@ static void pic_lock(struct kvm_pic *s)
 static void pic_unlock(struct kvm_pic *s)
 	__releases(&s->lock)
 {
-	struct kvm *kvm = s->kvm;
-	unsigned acks = s->pending_acks;
-	struct kvm_vcpu *vcpu;
-
-	s->pending_acks = 0;
-
 	spin_unlock(&s->lock);
-
-	while (acks) {
-		kvm_notify_acked_irq(kvm, SELECT_PIC(__ffs(acks)),
-				     __ffs(acks));
-		acks &= acks - 1;
-	}
 }
 
 static void pic_clear_isr(struct kvm_kpic_state *s, int irq)
 {
 	s->isr &= ~(1 << irq);
 	s->isr_ack |= (1 << irq);
+	if (s != &s->pics_state->pics[0])
+		irq += 8;
+	kvm_notify_acked_irq(s->pics_state->kvm, SELECT_PIC(irq), irq);
 }
 
 void kvm_pic_clear_isr_ack(struct kvm *kvm)
@@ -240,7 +231,6 @@ int kvm_pic_read_irq(struct kvm *kvm)
 	}
 	pic_update_irq(s);
 	pic_unlock(s);
-	kvm_notify_acked_irq(kvm, SELECT_PIC(irq), irq);
 
 	return intno;
 }
@@ -260,7 +250,7 @@ void kvm_pic_reset(struct kvm_kpic_state *s)
 		if (vcpu0 && kvm_apic_accept_pic_intr(vcpu0))
 			if (s->irr & (1 << irq) || s->isr & (1 << irq)) {
 				n = irq + irqbase;
-				s->pics_state->pending_acks |= 1 << n;
+				kvm_notify_acked_irq(kvm, SELECT_PIC(n), n);
 			}
 	}
 	s->last_irr = 0;
-- 
cgit v1.2.3


From 88ba63c2653b9b4857148fedba47ba2d8a4652c9 Mon Sep 17 00:00:00 2001
From: Gleb Natapov <gleb@redhat.com>
Date: Tue, 4 Aug 2009 15:30:29 +0300
Subject: KVM: Replace pic_lock()/pic_unlock() with direct call to spinlock
 functions

They are not doing anything else now.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/i8259.c | 36 ++++++++++++------------------------
 1 file changed, 12 insertions(+), 24 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/i8259.c b/arch/x86/kvm/i8259.c
index 3aacd331e2d..01f15168280 100644
--- a/arch/x86/kvm/i8259.c
+++ b/arch/x86/kvm/i8259.c
@@ -32,18 +32,6 @@
 #include <linux/kvm_host.h>
 #include "trace.h"
 
-static void pic_lock(struct kvm_pic *s)
-	__acquires(&s->lock)
-{
-	spin_lock(&s->lock);
-}
-
-static void pic_unlock(struct kvm_pic *s)
-	__releases(&s->lock)
-{
-	spin_unlock(&s->lock);
-}
-
 static void pic_clear_isr(struct kvm_kpic_state *s, int irq)
 {
 	s->isr &= ~(1 << irq);
@@ -56,10 +44,10 @@ static void pic_clear_isr(struct kvm_kpic_state *s, int irq)
 void kvm_pic_clear_isr_ack(struct kvm *kvm)
 {
 	struct kvm_pic *s = pic_irqchip(kvm);
-	pic_lock(s);
+	spin_lock(&s->lock);
 	s->pics[0].isr_ack = 0xff;
 	s->pics[1].isr_ack = 0xff;
-	pic_unlock(s);
+	spin_unlock(&s->lock);
 }
 
 /*
@@ -160,9 +148,9 @@ static void pic_update_irq(struct kvm_pic *s)
 
 void kvm_pic_update_irq(struct kvm_pic *s)
 {
-	pic_lock(s);
+	spin_lock(&s->lock);
 	pic_update_irq(s);
-	pic_unlock(s);
+	spin_unlock(&s->lock);
 }
 
 int kvm_pic_set_irq(void *opaque, int irq, int level)
@@ -170,14 +158,14 @@ int kvm_pic_set_irq(void *opaque, int irq, int level)
 	struct kvm_pic *s = opaque;
 	int ret = -1;
 
-	pic_lock(s);
+	spin_lock(&s->lock);
 	if (irq >= 0 && irq < PIC_NUM_PINS) {
 		ret = pic_set_irq1(&s->pics[irq >> 3], irq & 7, level);
 		pic_update_irq(s);
 		trace_kvm_pic_set_irq(irq >> 3, irq & 7, s->pics[irq >> 3].elcr,
 				      s->pics[irq >> 3].imr, ret == 0);
 	}
-	pic_unlock(s);
+	spin_unlock(&s->lock);
 
 	return ret;
 }
@@ -205,7 +193,7 @@ int kvm_pic_read_irq(struct kvm *kvm)
 	int irq, irq2, intno;
 	struct kvm_pic *s = pic_irqchip(kvm);
 
-	pic_lock(s);
+	spin_lock(&s->lock);
 	irq = pic_get_irq(&s->pics[0]);
 	if (irq >= 0) {
 		pic_intack(&s->pics[0], irq);
@@ -230,7 +218,7 @@ int kvm_pic_read_irq(struct kvm *kvm)
 		intno = s->pics[0].irq_base + irq;
 	}
 	pic_update_irq(s);
-	pic_unlock(s);
+	spin_unlock(&s->lock);
 
 	return intno;
 }
@@ -448,7 +436,7 @@ static int picdev_write(struct kvm_io_device *this,
 			printk(KERN_ERR "PIC: non byte write\n");
 		return 0;
 	}
-	pic_lock(s);
+	spin_lock(&s->lock);
 	switch (addr) {
 	case 0x20:
 	case 0x21:
@@ -461,7 +449,7 @@ static int picdev_write(struct kvm_io_device *this,
 		elcr_ioport_write(&s->pics[addr & 1], addr, data);
 		break;
 	}
-	pic_unlock(s);
+	spin_unlock(&s->lock);
 	return 0;
 }
 
@@ -478,7 +466,7 @@ static int picdev_read(struct kvm_io_device *this,
 			printk(KERN_ERR "PIC: non byte read\n");
 		return 0;
 	}
-	pic_lock(s);
+	spin_lock(&s->lock);
 	switch (addr) {
 	case 0x20:
 	case 0x21:
@@ -492,7 +480,7 @@ static int picdev_read(struct kvm_io_device *this,
 		break;
 	}
 	*(unsigned char *)val = data;
-	pic_unlock(s);
+	spin_unlock(&s->lock);
 	return 0;
 }
 
-- 
cgit v1.2.3


From 256cd2ef4f5c125f5df2c81d8457f080a4684ae6 Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Mon, 10 Aug 2009 10:41:27 +0300
Subject: x86: Export kmap_atomic_to_page()

Needed by KVM.

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/mm/highmem_32.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'arch')

diff --git a/arch/x86/mm/highmem_32.c b/arch/x86/mm/highmem_32.c
index 2112ed55e7e..572f47c1c73 100644
--- a/arch/x86/mm/highmem_32.c
+++ b/arch/x86/mm/highmem_32.c
@@ -104,6 +104,7 @@ EXPORT_SYMBOL(kunmap);
 EXPORT_SYMBOL(kmap_atomic);
 EXPORT_SYMBOL(kunmap_atomic);
 EXPORT_SYMBOL(kmap_atomic_prot);
+EXPORT_SYMBOL(kmap_atomic_to_page);
 
 void __init set_highmem_pages_init(void)
 {
-- 
cgit v1.2.3


From 2af9194d1b683f91ae956afff9afb0b52a241371 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Fri, 7 Aug 2009 11:49:28 +0200
Subject: KVM: SVM: add helper functions for global interrupt flag

This patch makes the code easier to read when it comes to setting,
clearing and checking the status of the virtualized global
interrupt flag for the VCPU.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/svm.c | 33 +++++++++++++++++++++++++--------
 1 file changed, 25 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 10e718db990..9f7277273a2 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -129,6 +129,21 @@ static inline bool is_nested(struct vcpu_svm *svm)
 	return svm->nested_vmcb;
 }
 
+static inline void enable_gif(struct vcpu_svm *svm)
+{
+	svm->vcpu.arch.hflags |= HF_GIF_MASK;
+}
+
+static inline void disable_gif(struct vcpu_svm *svm)
+{
+	svm->vcpu.arch.hflags &= ~HF_GIF_MASK;
+}
+
+static inline bool gif_set(struct vcpu_svm *svm)
+{
+	return !!(svm->vcpu.arch.hflags & HF_GIF_MASK);
+}
+
 static unsigned long iopm_base;
 
 struct kvm_ldttss_desc {
@@ -621,7 +636,9 @@ static void init_vmcb(struct vcpu_svm *svm)
 	force_new_asid(&svm->vcpu);
 
 	svm->nested_vmcb = 0;
-	svm->vcpu.arch.hflags = HF_GIF_MASK;
+	svm->vcpu.arch.hflags = 0;
+
+	enable_gif(svm);
 }
 
 static int svm_vcpu_reset(struct kvm_vcpu *vcpu)
@@ -1629,7 +1646,7 @@ static int nested_svm_vmexit_real(struct vcpu_svm *svm, void *arg1,
 	svm->vmcb->save.cpl = 0;
 	svm->vmcb->control.exit_int_info = 0;
 
-	svm->vcpu.arch.hflags &= ~HF_GIF_MASK;
+	disable_gif(svm);
 	/* Exit nested SVM mode */
 	svm->nested_vmcb = 0;
 
@@ -1761,7 +1778,7 @@ static int nested_svm_vmrun(struct vcpu_svm *svm, void *arg1,
 	svm->vmcb->control.event_inj = nested_vmcb->control.event_inj;
 	svm->vmcb->control.event_inj_err = nested_vmcb->control.event_inj_err;
 
-	svm->vcpu.arch.hflags |= HF_GIF_MASK;
+	enable_gif(svm);
 
 	return 0;
 }
@@ -1850,7 +1867,7 @@ static int stgi_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 	svm->next_rip = kvm_rip_read(&svm->vcpu) + 3;
 	skip_emulated_instruction(&svm->vcpu);
 
-	svm->vcpu.arch.hflags |= HF_GIF_MASK;
+	enable_gif(svm);
 
 	return 1;
 }
@@ -1863,7 +1880,7 @@ static int clgi_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 	svm->next_rip = kvm_rip_read(&svm->vcpu) + 3;
 	skip_emulated_instruction(&svm->vcpu);
 
-	svm->vcpu.arch.hflags &= ~HF_GIF_MASK;
+	disable_gif(svm);
 
 	/* After a CLGI no interrupts should come */
 	svm_clear_vintr(svm);
@@ -2352,7 +2369,7 @@ static void svm_set_irq(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_svm *svm = to_svm(vcpu);
 
-	BUG_ON(!(svm->vcpu.arch.hflags & HF_GIF_MASK));
+	BUG_ON(!(gif_set(svm)));
 
 	svm->vmcb->control.event_inj = vcpu->arch.interrupt.nr |
 		SVM_EVTINJ_VALID | SVM_EVTINJ_TYPE_INTR;
@@ -2383,7 +2400,7 @@ static int svm_interrupt_allowed(struct kvm_vcpu *vcpu)
 	struct vmcb *vmcb = svm->vmcb;
 	return (vmcb->save.rflags & X86_EFLAGS_IF) &&
 		!(vmcb->control.int_state & SVM_INTERRUPT_SHADOW_MASK) &&
-		(svm->vcpu.arch.hflags & HF_GIF_MASK) &&
+		gif_set(svm) &&
 		!is_nested(svm);
 }
 
@@ -2398,7 +2415,7 @@ static void enable_irq_window(struct kvm_vcpu *vcpu)
 	 * GIF becomes 1, because that's a separate STGI/VMRUN intercept.
 	 * The next time we get that intercept, this function will be
 	 * called again though and we'll get the vintr intercept. */
-	if (svm->vcpu.arch.hflags & HF_GIF_MASK) {
+	if (gif_set(svm)) {
 		svm_set_vintr(svm);
 		svm_inject_irq(svm, 0x0);
 	}
-- 
cgit v1.2.3


From 33740e4009b7d287538f68f614eb3542df3597e4 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Fri, 7 Aug 2009 11:49:29 +0200
Subject: KVM: SVM: optimize nested #vmexit

It is more efficient to copy only the relevant parts of the vmcb back to
the nested vmcb when we emulate an vmexit.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/svm.c | 68 ++++++++++++++++++++++++++----------------------------
 1 file changed, 33 insertions(+), 35 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 9f7277273a2..2f5f2236f2a 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -1572,53 +1572,52 @@ static int nested_svm_vmexit_real(struct vcpu_svm *svm, void *arg1,
 {
 	struct vmcb *nested_vmcb = (struct vmcb *)arg1;
 	struct vmcb *hsave = svm->hsave;
-	u64 nested_save[] = { nested_vmcb->save.cr0,
-			      nested_vmcb->save.cr3,
-			      nested_vmcb->save.cr4,
-			      nested_vmcb->save.efer,
-			      nested_vmcb->control.intercept_cr_read,
-			      nested_vmcb->control.intercept_cr_write,
-			      nested_vmcb->control.intercept_dr_read,
-			      nested_vmcb->control.intercept_dr_write,
-			      nested_vmcb->control.intercept_exceptions,
-			      nested_vmcb->control.intercept,
-			      nested_vmcb->control.msrpm_base_pa,
-			      nested_vmcb->control.iopm_base_pa,
-			      nested_vmcb->control.tsc_offset };
+	struct vmcb *vmcb = svm->vmcb;
 
 	/* Give the current vmcb to the guest */
-	memcpy(nested_vmcb, svm->vmcb, sizeof(struct vmcb));
-	nested_vmcb->save.cr0 = nested_save[0];
-	if (!npt_enabled)
-		nested_vmcb->save.cr3 = nested_save[1];
-	nested_vmcb->save.cr4 = nested_save[2];
-	nested_vmcb->save.efer = nested_save[3];
-	nested_vmcb->control.intercept_cr_read = nested_save[4];
-	nested_vmcb->control.intercept_cr_write = nested_save[5];
-	nested_vmcb->control.intercept_dr_read = nested_save[6];
-	nested_vmcb->control.intercept_dr_write = nested_save[7];
-	nested_vmcb->control.intercept_exceptions = nested_save[8];
-	nested_vmcb->control.intercept = nested_save[9];
-	nested_vmcb->control.msrpm_base_pa = nested_save[10];
-	nested_vmcb->control.iopm_base_pa = nested_save[11];
-	nested_vmcb->control.tsc_offset = nested_save[12];
+	disable_gif(svm);
+
+	nested_vmcb->save.es     = vmcb->save.es;
+	nested_vmcb->save.cs     = vmcb->save.cs;
+	nested_vmcb->save.ss     = vmcb->save.ss;
+	nested_vmcb->save.ds     = vmcb->save.ds;
+	nested_vmcb->save.gdtr   = vmcb->save.gdtr;
+	nested_vmcb->save.idtr   = vmcb->save.idtr;
+	if (npt_enabled)
+		nested_vmcb->save.cr3    = vmcb->save.cr3;
+	nested_vmcb->save.cr2    = vmcb->save.cr2;
+	nested_vmcb->save.rflags = vmcb->save.rflags;
+	nested_vmcb->save.rip    = vmcb->save.rip;
+	nested_vmcb->save.rsp    = vmcb->save.rsp;
+	nested_vmcb->save.rax    = vmcb->save.rax;
+	nested_vmcb->save.dr7    = vmcb->save.dr7;
+	nested_vmcb->save.dr6    = vmcb->save.dr6;
+	nested_vmcb->save.cpl    = vmcb->save.cpl;
+
+	nested_vmcb->control.int_ctl           = vmcb->control.int_ctl;
+	nested_vmcb->control.int_vector        = vmcb->control.int_vector;
+	nested_vmcb->control.int_state         = vmcb->control.int_state;
+	nested_vmcb->control.exit_code         = vmcb->control.exit_code;
+	nested_vmcb->control.exit_code_hi      = vmcb->control.exit_code_hi;
+	nested_vmcb->control.exit_info_1       = vmcb->control.exit_info_1;
+	nested_vmcb->control.exit_info_2       = vmcb->control.exit_info_2;
+	nested_vmcb->control.exit_int_info     = vmcb->control.exit_int_info;
+	nested_vmcb->control.exit_int_info_err = vmcb->control.exit_int_info_err;
+	nested_vmcb->control.tlb_ctl           = 0;
+	nested_vmcb->control.event_inj         = 0;
+	nested_vmcb->control.event_inj_err     = 0;
 
 	/* We always set V_INTR_MASKING and remember the old value in hflags */
 	if (!(svm->vcpu.arch.hflags & HF_VINTR_MASK))
 		nested_vmcb->control.int_ctl &= ~V_INTR_MASKING_MASK;
 
-	if ((nested_vmcb->control.int_ctl & V_IRQ_MASK) &&
-	    (nested_vmcb->control.int_vector)) {
-		nsvm_printk("WARNING: IRQ 0x%x still enabled on #VMEXIT\n",
-				nested_vmcb->control.int_vector);
-	}
-
 	/* Restore the original control entries */
 	svm->vmcb->control = hsave->control;
 
 	/* Kill any pending exceptions */
 	if (svm->vcpu.arch.exception.pending == true)
 		nsvm_printk("WARNING: Pending Exception\n");
+
 	kvm_clear_exception_queue(&svm->vcpu);
 	kvm_clear_interrupt_queue(&svm->vcpu);
 
@@ -1646,7 +1645,6 @@ static int nested_svm_vmexit_real(struct vcpu_svm *svm, void *arg1,
 	svm->vmcb->save.cpl = 0;
 	svm->vmcb->control.exit_int_info = 0;
 
-	disable_gif(svm);
 	/* Exit nested SVM mode */
 	svm->nested_vmcb = 0;
 
-- 
cgit v1.2.3


From defbba5660fb9fcad186bd799a635e52994a4d1a Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Fri, 7 Aug 2009 11:49:30 +0200
Subject: KVM: SVM: optimize nested vmrun

Only copy the necessary parts of the vmcb save area on vmrun and save
precious time.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/svm.c | 28 +++++++++++++++++++++-------
 1 file changed, 21 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 2f5f2236f2a..f11f88005c2 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -1681,6 +1681,7 @@ static int nested_svm_vmrun(struct vcpu_svm *svm, void *arg1,
 {
 	struct vmcb *nested_vmcb = (struct vmcb *)arg1;
 	struct vmcb *hsave = svm->hsave;
+	struct vmcb *vmcb = svm->vmcb;
 
 	/* nested_vmcb is our indicator if nested SVM is activated */
 	svm->nested_vmcb = svm->vmcb->save.rax;
@@ -1691,12 +1692,25 @@ static int nested_svm_vmrun(struct vcpu_svm *svm, void *arg1,
 
 	/* Save the old vmcb, so we don't need to pick what we save, but
 	   can restore everything when a VMEXIT occurs */
-	memcpy(hsave, svm->vmcb, sizeof(struct vmcb));
-	/* We need to remember the original CR3 in the SPT case */
-	if (!npt_enabled)
-		hsave->save.cr3 = svm->vcpu.arch.cr3;
-	hsave->save.cr4 = svm->vcpu.arch.cr4;
-	hsave->save.rip = svm->next_rip;
+	hsave->save.es     = vmcb->save.es;
+	hsave->save.cs     = vmcb->save.cs;
+	hsave->save.ss     = vmcb->save.ss;
+	hsave->save.ds     = vmcb->save.ds;
+	hsave->save.gdtr   = vmcb->save.gdtr;
+	hsave->save.idtr   = vmcb->save.idtr;
+	hsave->save.efer   = svm->vcpu.arch.shadow_efer;
+	hsave->save.cr0    = svm->vcpu.arch.cr0;
+	hsave->save.cr4    = svm->vcpu.arch.cr4;
+	hsave->save.rflags = vmcb->save.rflags;
+	hsave->save.rip    = svm->next_rip;
+	hsave->save.rsp    = vmcb->save.rsp;
+	hsave->save.rax    = vmcb->save.rax;
+	if (npt_enabled)
+		hsave->save.cr3    = vmcb->save.cr3;
+	else
+		hsave->save.cr3    = svm->vcpu.arch.cr3;
+
+	hsave->control = vmcb->control;
 
 	if (svm->vmcb->save.rflags & X86_EFLAGS_IF)
 		svm->vcpu.arch.hflags |= HF_HIF_MASK;
@@ -1721,7 +1735,7 @@ static int nested_svm_vmrun(struct vcpu_svm *svm, void *arg1,
 		kvm_set_cr3(&svm->vcpu, nested_vmcb->save.cr3);
 		kvm_mmu_reset_context(&svm->vcpu);
 	}
-	svm->vmcb->save.cr2 = nested_vmcb->save.cr2;
+	svm->vmcb->save.cr2 = svm->vcpu.arch.cr2 = nested_vmcb->save.cr2;
 	kvm_register_write(&svm->vcpu, VCPU_REGS_RAX, nested_vmcb->save.rax);
 	kvm_register_write(&svm->vcpu, VCPU_REGS_RSP, nested_vmcb->save.rsp);
 	kvm_register_write(&svm->vcpu, VCPU_REGS_RIP, nested_vmcb->save.rip);
-- 
cgit v1.2.3


From 0460a979b4b7a564e59eaa8efbba6f5ae38c5b78 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Fri, 7 Aug 2009 11:49:31 +0200
Subject: KVM: SVM: copy only necessary parts of the control area on
 vmrun/vmexit

The vmcb control area contains more then 800 bytes of reserved fields
which are unnecessarily copied. Fix this by introducing a copy
function which only copies the relevant part and saves time.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/svm.c | 36 ++++++++++++++++++++++++++++++++++--
 1 file changed, 34 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index f11f88005c2..df795bcebd2 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -1567,6 +1567,38 @@ static int nested_svm_exit_handled(struct vcpu_svm *svm, bool kvm_override)
 			     nested_svm_exit_handled_real);
 }
 
+static inline void copy_vmcb_control_area(struct vmcb *dst_vmcb, struct vmcb *from_vmcb)
+{
+	struct vmcb_control_area *dst  = &dst_vmcb->control;
+	struct vmcb_control_area *from = &from_vmcb->control;
+
+	dst->intercept_cr_read    = from->intercept_cr_read;
+	dst->intercept_cr_write   = from->intercept_cr_write;
+	dst->intercept_dr_read    = from->intercept_dr_read;
+	dst->intercept_dr_write   = from->intercept_dr_write;
+	dst->intercept_exceptions = from->intercept_exceptions;
+	dst->intercept            = from->intercept;
+	dst->iopm_base_pa         = from->iopm_base_pa;
+	dst->msrpm_base_pa        = from->msrpm_base_pa;
+	dst->tsc_offset           = from->tsc_offset;
+	dst->asid                 = from->asid;
+	dst->tlb_ctl              = from->tlb_ctl;
+	dst->int_ctl              = from->int_ctl;
+	dst->int_vector           = from->int_vector;
+	dst->int_state            = from->int_state;
+	dst->exit_code            = from->exit_code;
+	dst->exit_code_hi         = from->exit_code_hi;
+	dst->exit_info_1          = from->exit_info_1;
+	dst->exit_info_2          = from->exit_info_2;
+	dst->exit_int_info        = from->exit_int_info;
+	dst->exit_int_info_err    = from->exit_int_info_err;
+	dst->nested_ctl           = from->nested_ctl;
+	dst->event_inj            = from->event_inj;
+	dst->event_inj_err        = from->event_inj_err;
+	dst->nested_cr3           = from->nested_cr3;
+	dst->lbr_ctl              = from->lbr_ctl;
+}
+
 static int nested_svm_vmexit_real(struct vcpu_svm *svm, void *arg1,
 				  void *arg2, void *opaque)
 {
@@ -1612,7 +1644,7 @@ static int nested_svm_vmexit_real(struct vcpu_svm *svm, void *arg1,
 		nested_vmcb->control.int_ctl &= ~V_INTR_MASKING_MASK;
 
 	/* Restore the original control entries */
-	svm->vmcb->control = hsave->control;
+	copy_vmcb_control_area(vmcb, hsave);
 
 	/* Kill any pending exceptions */
 	if (svm->vcpu.arch.exception.pending == true)
@@ -1710,7 +1742,7 @@ static int nested_svm_vmrun(struct vcpu_svm *svm, void *arg1,
 	else
 		hsave->save.cr3    = svm->vcpu.arch.cr3;
 
-	hsave->control = vmcb->control;
+	copy_vmcb_control_area(hsave, vmcb);
 
 	if (svm->vmcb->save.rflags & X86_EFLAGS_IF)
 		svm->vcpu.arch.hflags |= HF_HIF_MASK;
-- 
cgit v1.2.3


From a5c3832dfe6324862b4fd1d90831266b15d4b58e Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Fri, 7 Aug 2009 11:49:32 +0200
Subject: KVM: SVM: complete interrupts after handling nested exits

The interrupt completion code must run after nested exits are handled
because not injected interrupts or exceptions may be handled by the l1
guest first.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/svm.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index df795bcebd2..825b82540f0 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -111,6 +111,7 @@ static int nested = 0;
 module_param(nested, int, S_IRUGO);
 
 static void svm_flush_tlb(struct kvm_vcpu *vcpu);
+static void svm_complete_interrupts(struct vcpu_svm *svm);
 
 static int nested_svm_exit_handled(struct vcpu_svm *svm, bool kvm_override);
 static int nested_svm_vmexit(struct vcpu_svm *svm);
@@ -2324,6 +2325,8 @@ static int handle_exit(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
 		}
 	}
 
+	svm_complete_interrupts(svm);
+
 	if (npt_enabled) {
 		int mmu_reload = 0;
 		if ((vcpu->arch.cr0 ^ svm->vmcb->save.cr0) & X86_CR0_PG) {
@@ -2690,8 +2693,6 @@ static void svm_vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 		vcpu->arch.regs_avail &= ~(1 << VCPU_EXREG_PDPTR);
 		vcpu->arch.regs_dirty &= ~(1 << VCPU_EXREG_PDPTR);
 	}
-
-	svm_complete_interrupts(svm);
 }
 
 #undef R
-- 
cgit v1.2.3


From e6aa9abd7381557c67be6a9e7240eb132ca00d66 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Fri, 7 Aug 2009 11:49:33 +0200
Subject: KVM: SVM: move nested svm state into seperate struct

This makes it more clear for which purpose these members in the vcpu_svm
exist.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/svm.c | 62 +++++++++++++++++++++++++++++-------------------------
 1 file changed, 33 insertions(+), 29 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 825b82540f0..fbadaa7cb27 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -70,6 +70,18 @@ static const u32 host_save_user_msrs[] = {
 
 struct kvm_vcpu;
 
+struct nested_state {
+	struct vmcb *hsave;
+	u64 hsave_msr;
+	u64 vmcb;
+
+	/* These are the merged vectors */
+	u32 *msrpm;
+
+	/* gpa pointers to the real vectors */
+	u64 vmcb_msrpm;
+};
+
 struct vcpu_svm {
 	struct kvm_vcpu vcpu;
 	struct vmcb *vmcb;
@@ -85,16 +97,8 @@ struct vcpu_svm {
 	u64 host_gs_base;
 
 	u32 *msrpm;
-	struct vmcb *hsave;
-	u64 hsave_msr;
-
-	u64 nested_vmcb;
 
-	/* These are the merged vectors */
-	u32 *nested_msrpm;
-
-	/* gpa pointers to the real vectors */
-	u64 nested_vmcb_msrpm;
+	struct nested_state nested;
 };
 
 /* enable NPT for AMD64 and X86 with PAE */
@@ -127,7 +131,7 @@ static inline struct vcpu_svm *to_svm(struct kvm_vcpu *vcpu)
 
 static inline bool is_nested(struct vcpu_svm *svm)
 {
-	return svm->nested_vmcb;
+	return svm->nested.vmcb;
 }
 
 static inline void enable_gif(struct vcpu_svm *svm)
@@ -636,7 +640,7 @@ static void init_vmcb(struct vcpu_svm *svm)
 	}
 	force_new_asid(&svm->vcpu);
 
-	svm->nested_vmcb = 0;
+	svm->nested.vmcb = 0;
 	svm->vcpu.arch.hflags = 0;
 
 	enable_gif(svm);
@@ -699,9 +703,9 @@ static struct kvm_vcpu *svm_create_vcpu(struct kvm *kvm, unsigned int id)
 	hsave_page = alloc_page(GFP_KERNEL);
 	if (!hsave_page)
 		goto uninit;
-	svm->hsave = page_address(hsave_page);
+	svm->nested.hsave = page_address(hsave_page);
 
-	svm->nested_msrpm = page_address(nested_msrpm_pages);
+	svm->nested.msrpm = page_address(nested_msrpm_pages);
 
 	svm->vmcb = page_address(page);
 	clear_page(svm->vmcb);
@@ -731,8 +735,8 @@ static void svm_free_vcpu(struct kvm_vcpu *vcpu)
 
 	__free_page(pfn_to_page(svm->vmcb_pa >> PAGE_SHIFT));
 	__free_pages(virt_to_page(svm->msrpm), MSRPM_ALLOC_ORDER);
-	__free_page(virt_to_page(svm->hsave));
-	__free_pages(virt_to_page(svm->nested_msrpm), MSRPM_ALLOC_ORDER);
+	__free_page(virt_to_page(svm->nested.hsave));
+	__free_pages(virt_to_page(svm->nested.msrpm), MSRPM_ALLOC_ORDER);
 	kvm_vcpu_uninit(vcpu);
 	kmem_cache_free(kvm_vcpu_cache, svm);
 }
@@ -1558,13 +1562,13 @@ static int nested_svm_exit_handled(struct vcpu_svm *svm, bool kvm_override)
 
 	switch (svm->vmcb->control.exit_code) {
 	case SVM_EXIT_MSR:
-		return nested_svm_do(svm, svm->nested_vmcb,
-				     svm->nested_vmcb_msrpm, NULL,
+		return nested_svm_do(svm, svm->nested.vmcb,
+				     svm->nested.vmcb_msrpm, NULL,
 				     nested_svm_exit_handled_msr);
 	default: break;
 	}
 
-	return nested_svm_do(svm, svm->nested_vmcb, 0, &k,
+	return nested_svm_do(svm, svm->nested.vmcb, 0, &k,
 			     nested_svm_exit_handled_real);
 }
 
@@ -1604,7 +1608,7 @@ static int nested_svm_vmexit_real(struct vcpu_svm *svm, void *arg1,
 				  void *arg2, void *opaque)
 {
 	struct vmcb *nested_vmcb = (struct vmcb *)arg1;
-	struct vmcb *hsave = svm->hsave;
+	struct vmcb *hsave = svm->nested.hsave;
 	struct vmcb *vmcb = svm->vmcb;
 
 	/* Give the current vmcb to the guest */
@@ -1679,7 +1683,7 @@ static int nested_svm_vmexit_real(struct vcpu_svm *svm, void *arg1,
 	svm->vmcb->control.exit_int_info = 0;
 
 	/* Exit nested SVM mode */
-	svm->nested_vmcb = 0;
+	svm->nested.vmcb = 0;
 
 	return 0;
 }
@@ -1687,7 +1691,7 @@ static int nested_svm_vmexit_real(struct vcpu_svm *svm, void *arg1,
 static int nested_svm_vmexit(struct vcpu_svm *svm)
 {
 	nsvm_printk("VMexit\n");
-	if (nested_svm_do(svm, svm->nested_vmcb, 0,
+	if (nested_svm_do(svm, svm->nested.vmcb, 0,
 			  NULL, nested_svm_vmexit_real))
 		return 1;
 
@@ -1703,8 +1707,8 @@ static int nested_svm_vmrun_msrpm(struct vcpu_svm *svm, void *arg1,
 	int i;
 	u32 *nested_msrpm = (u32*)arg1;
 	for (i=0; i< PAGE_SIZE * (1 << MSRPM_ALLOC_ORDER) / 4; i++)
-		svm->nested_msrpm[i] = svm->msrpm[i] | nested_msrpm[i];
-	svm->vmcb->control.msrpm_base_pa = __pa(svm->nested_msrpm);
+		svm->nested.msrpm[i] = svm->msrpm[i] | nested_msrpm[i];
+	svm->vmcb->control.msrpm_base_pa = __pa(svm->nested.msrpm);
 
 	return 0;
 }
@@ -1713,11 +1717,11 @@ static int nested_svm_vmrun(struct vcpu_svm *svm, void *arg1,
 			    void *arg2, void *opaque)
 {
 	struct vmcb *nested_vmcb = (struct vmcb *)arg1;
-	struct vmcb *hsave = svm->hsave;
+	struct vmcb *hsave = svm->nested.hsave;
 	struct vmcb *vmcb = svm->vmcb;
 
 	/* nested_vmcb is our indicator if nested SVM is activated */
-	svm->nested_vmcb = svm->vmcb->save.rax;
+	svm->nested.vmcb = svm->vmcb->save.rax;
 
 	/* Clear internal status */
 	kvm_clear_exception_queue(&svm->vcpu);
@@ -1795,7 +1799,7 @@ static int nested_svm_vmrun(struct vcpu_svm *svm, void *arg1,
 
 	svm->vmcb->control.intercept |= nested_vmcb->control.intercept;
 
-	svm->nested_vmcb_msrpm = nested_vmcb->control.msrpm_base_pa;
+	svm->nested.vmcb_msrpm = nested_vmcb->control.msrpm_base_pa;
 
 	force_new_asid(&svm->vcpu);
 	svm->vmcb->control.exit_int_info = nested_vmcb->control.exit_int_info;
@@ -1897,7 +1901,7 @@ static int vmrun_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 			  NULL, nested_svm_vmrun))
 		return 1;
 
-	if (nested_svm_do(svm, svm->nested_vmcb_msrpm, 0,
+	if (nested_svm_do(svm, svm->nested.vmcb_msrpm, 0,
 		      NULL, nested_svm_vmrun_msrpm))
 		return 1;
 
@@ -2107,7 +2111,7 @@ static int svm_get_msr(struct kvm_vcpu *vcpu, unsigned ecx, u64 *data)
 		*data = svm->vmcb->save.last_excp_to;
 		break;
 	case MSR_VM_HSAVE_PA:
-		*data = svm->hsave_msr;
+		*data = svm->nested.hsave_msr;
 		break;
 	case MSR_VM_CR:
 		*data = 0;
@@ -2195,7 +2199,7 @@ static int svm_set_msr(struct kvm_vcpu *vcpu, unsigned ecx, u64 data)
 			svm_disable_lbrv(svm);
 		break;
 	case MSR_VM_HSAVE_PA:
-		svm->hsave_msr = data;
+		svm->nested.hsave_msr = data;
 		break;
 	case MSR_VM_CR:
 	case MSR_VM_IGNNE:
-- 
cgit v1.2.3


From aad42c641cfcda4f87abc4f6588329b9b3cc3364 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Fri, 7 Aug 2009 11:49:34 +0200
Subject: KVM: SVM: cache nested intercepts

When the nested intercepts are cached we don't need to call
get_user_pages and/or map the nested vmcb on every nested #vmexit to
check who will handle the intercept.
Further this patch aligns the emulated svm behavior better to real
hardware.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/svm.c | 30 +++++++++++++++++++++++-------
 1 file changed, 23 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index fbadaa7cb27..4426c631057 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -80,6 +80,15 @@ struct nested_state {
 
 	/* gpa pointers to the real vectors */
 	u64 vmcb_msrpm;
+
+	/* cache for intercepts of the guest */
+	u16 intercept_cr_read;
+	u16 intercept_cr_write;
+	u16 intercept_dr_read;
+	u16 intercept_dr_write;
+	u32 intercept_exceptions;
+	u64 intercept;
+
 };
 
 struct vcpu_svm {
@@ -1452,7 +1461,6 @@ static int nested_svm_exit_handled_real(struct vcpu_svm *svm,
 					void *arg2,
 					void *opaque)
 {
-	struct vmcb *nested_vmcb = (struct vmcb *)arg1;
 	bool kvm_overrides = *(bool *)opaque;
 	u32 exit_code = svm->vmcb->control.exit_code;
 
@@ -1479,38 +1487,38 @@ static int nested_svm_exit_handled_real(struct vcpu_svm *svm,
 	switch (exit_code) {
 	case SVM_EXIT_READ_CR0 ... SVM_EXIT_READ_CR8: {
 		u32 cr_bits = 1 << (exit_code - SVM_EXIT_READ_CR0);
-		if (nested_vmcb->control.intercept_cr_read & cr_bits)
+		if (svm->nested.intercept_cr_read & cr_bits)
 			return 1;
 		break;
 	}
 	case SVM_EXIT_WRITE_CR0 ... SVM_EXIT_WRITE_CR8: {
 		u32 cr_bits = 1 << (exit_code - SVM_EXIT_WRITE_CR0);
-		if (nested_vmcb->control.intercept_cr_write & cr_bits)
+		if (svm->nested.intercept_cr_write & cr_bits)
 			return 1;
 		break;
 	}
 	case SVM_EXIT_READ_DR0 ... SVM_EXIT_READ_DR7: {
 		u32 dr_bits = 1 << (exit_code - SVM_EXIT_READ_DR0);
-		if (nested_vmcb->control.intercept_dr_read & dr_bits)
+		if (svm->nested.intercept_dr_read & dr_bits)
 			return 1;
 		break;
 	}
 	case SVM_EXIT_WRITE_DR0 ... SVM_EXIT_WRITE_DR7: {
 		u32 dr_bits = 1 << (exit_code - SVM_EXIT_WRITE_DR0);
-		if (nested_vmcb->control.intercept_dr_write & dr_bits)
+		if (svm->nested.intercept_dr_write & dr_bits)
 			return 1;
 		break;
 	}
 	case SVM_EXIT_EXCP_BASE ... SVM_EXIT_EXCP_BASE + 0x1f: {
 		u32 excp_bits = 1 << (exit_code - SVM_EXIT_EXCP_BASE);
-		if (nested_vmcb->control.intercept_exceptions & excp_bits)
+		if (svm->nested.intercept_exceptions & excp_bits)
 			return 1;
 		break;
 	}
 	default: {
 		u64 exit_bits = 1ULL << (exit_code - SVM_EXIT_INTR);
 		nsvm_printk("exit code: 0x%x\n", exit_code);
-		if (nested_vmcb->control.intercept & exit_bits)
+		if (svm->nested.intercept & exit_bits)
 			return 1;
 	}
 	}
@@ -1801,6 +1809,14 @@ static int nested_svm_vmrun(struct vcpu_svm *svm, void *arg1,
 
 	svm->nested.vmcb_msrpm = nested_vmcb->control.msrpm_base_pa;
 
+	/* cache intercepts */
+	svm->nested.intercept_cr_read    = nested_vmcb->control.intercept_cr_read;
+	svm->nested.intercept_cr_write   = nested_vmcb->control.intercept_cr_write;
+	svm->nested.intercept_dr_read    = nested_vmcb->control.intercept_dr_read;
+	svm->nested.intercept_dr_write   = nested_vmcb->control.intercept_dr_write;
+	svm->nested.intercept_exceptions = nested_vmcb->control.intercept_exceptions;
+	svm->nested.intercept            = nested_vmcb->control.intercept;
+
 	force_new_asid(&svm->vcpu);
 	svm->vmcb->control.exit_int_info = nested_vmcb->control.exit_int_info;
 	svm->vmcb->control.exit_int_info_err = nested_vmcb->control.exit_int_info_err;
-- 
cgit v1.2.3


From 4c2161aed55c294c4c42622455f067a4b3077b85 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Fri, 7 Aug 2009 11:49:35 +0200
Subject: KVM: SVM: consolidate nested_svm_exit_handled

When caching guest intercepts there is no need anymore for the
nested_svm_exit_handled_real function. So move its code into
nested_svm_exit_handled.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/svm.c | 109 ++++++++++++++++++++++++-----------------------------
 1 file changed, 49 insertions(+), 60 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 4426c631057..bdd73fd9a75 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -1456,15 +1456,58 @@ static int nested_svm_do(struct vcpu_svm *svm,
 	return retval;
 }
 
-static int nested_svm_exit_handled_real(struct vcpu_svm *svm,
-					void *arg1,
-					void *arg2,
-					void *opaque)
+static int nested_svm_exit_handled_msr(struct vcpu_svm *svm,
+				       void *arg1, void *arg2,
+				       void *opaque)
+{
+	struct vmcb *nested_vmcb = (struct vmcb *)arg1;
+	u8 *msrpm = (u8 *)arg2;
+	u32 t0, t1;
+	u32 msr = svm->vcpu.arch.regs[VCPU_REGS_RCX];
+	u32 param = svm->vmcb->control.exit_info_1 & 1;
+
+	if (!(nested_vmcb->control.intercept & (1ULL << INTERCEPT_MSR_PROT)))
+		return 0;
+
+	switch (msr) {
+	case 0 ... 0x1fff:
+		t0 = (msr * 2) % 8;
+		t1 = msr / 8;
+		break;
+	case 0xc0000000 ... 0xc0001fff:
+		t0 = (8192 + msr - 0xc0000000) * 2;
+		t1 = (t0 / 8);
+		t0 %= 8;
+		break;
+	case 0xc0010000 ... 0xc0011fff:
+		t0 = (16384 + msr - 0xc0010000) * 2;
+		t1 = (t0 / 8);
+		t0 %= 8;
+		break;
+	default:
+		return 1;
+		break;
+	}
+	if (msrpm[t1] & ((1 << param) << t0))
+		return 1;
+
+	return 0;
+}
+
+static int nested_svm_exit_handled(struct vcpu_svm *svm, bool kvm_override)
 {
-	bool kvm_overrides = *(bool *)opaque;
 	u32 exit_code = svm->vmcb->control.exit_code;
 
-	if (kvm_overrides) {
+	switch (svm->vmcb->control.exit_code) {
+	case SVM_EXIT_MSR:
+		return nested_svm_do(svm, svm->nested.vmcb,
+				     svm->nested.vmcb_msrpm, NULL,
+				     nested_svm_exit_handled_msr);
+	default:
+		break;
+	}
+
+	if (kvm_override) {
 		switch (exit_code) {
 		case SVM_EXIT_INTR:
 		case SVM_EXIT_NMI:
@@ -1526,60 +1569,6 @@ static int nested_svm_exit_handled_real(struct vcpu_svm *svm,
 	return 0;
 }
 
-static int nested_svm_exit_handled_msr(struct vcpu_svm *svm,
-				       void *arg1, void *arg2,
-				       void *opaque)
-{
-	struct vmcb *nested_vmcb = (struct vmcb *)arg1;
-	u8 *msrpm = (u8 *)arg2;
-        u32 t0, t1;
-	u32 msr = svm->vcpu.arch.regs[VCPU_REGS_RCX];
-	u32 param = svm->vmcb->control.exit_info_1 & 1;
-
-	if (!(nested_vmcb->control.intercept & (1ULL << INTERCEPT_MSR_PROT)))
-		return 0;
-
-	switch(msr) {
-	case 0 ... 0x1fff:
-		t0 = (msr * 2) % 8;
-		t1 = msr / 8;
-		break;
-	case 0xc0000000 ... 0xc0001fff:
-		t0 = (8192 + msr - 0xc0000000) * 2;
-		t1 = (t0 / 8);
-		t0 %= 8;
-		break;
-	case 0xc0010000 ... 0xc0011fff:
-		t0 = (16384 + msr - 0xc0010000) * 2;
-		t1 = (t0 / 8);
-		t0 %= 8;
-		break;
-	default:
-		return 1;
-		break;
-	}
-	if (msrpm[t1] & ((1 << param) << t0))
-		return 1;
-
-	return 0;
-}
-
-static int nested_svm_exit_handled(struct vcpu_svm *svm, bool kvm_override)
-{
-	bool k = kvm_override;
-
-	switch (svm->vmcb->control.exit_code) {
-	case SVM_EXIT_MSR:
-		return nested_svm_do(svm, svm->nested.vmcb,
-				     svm->nested.vmcb_msrpm, NULL,
-				     nested_svm_exit_handled_msr);
-	default: break;
-	}
-
-	return nested_svm_do(svm, svm->nested.vmcb, 0, &k,
-			     nested_svm_exit_handled_real);
-}
-
 static inline void copy_vmcb_control_area(struct vmcb *dst_vmcb, struct vmcb *from_vmcb)
 {
 	struct vmcb_control_area *dst  = &dst_vmcb->control;
-- 
cgit v1.2.3


From 9c4e40b9949868928bd7fec67a4b0902d90e57ed Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Fri, 7 Aug 2009 11:49:36 +0200
Subject: KVM: SVM: do nested vmexit in nested_svm_exit_handled

If this function returns true a nested vmexit is required. Move that
vmexit into the nested_svm_exit_handled function. This also simplifies
the handling of nested #pf intercepts in this function.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/svm.c | 42 +++++++++++++++++++-----------------------
 1 file changed, 19 insertions(+), 23 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index bdd73fd9a75..3bb6d4b92b3 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -1366,8 +1366,6 @@ static int nested_svm_check_exception(struct vcpu_svm *svm, unsigned nr,
 		svm->vmcb->control.exit_info_2 = svm->vcpu.arch.cr2;
 		if (nested_svm_exit_handled(svm, false)) {
 			nsvm_printk("VMexit -> EXCP 0x%x\n", nr);
-
-			nested_svm_vmexit(svm);
 			return 1;
 		}
 	}
@@ -1388,7 +1386,6 @@ static inline int nested_svm_intr(struct vcpu_svm *svm)
 
 		if (nested_svm_exit_handled(svm, false)) {
 			nsvm_printk("VMexit -> INTR\n");
-			nested_svm_vmexit(svm);
 			return 1;
 		}
 	}
@@ -1497,15 +1494,7 @@ static int nested_svm_exit_handled_msr(struct vcpu_svm *svm,
 static int nested_svm_exit_handled(struct vcpu_svm *svm, bool kvm_override)
 {
 	u32 exit_code = svm->vmcb->control.exit_code;
-
-	switch (svm->vmcb->control.exit_code) {
-	case SVM_EXIT_MSR:
-		return nested_svm_do(svm, svm->nested.vmcb,
-				     svm->nested.vmcb_msrpm, NULL,
-				     nested_svm_exit_handled_msr);
-	default:
-		break;
-	}
+	bool vmexit = false;
 
 	if (kvm_override) {
 		switch (exit_code) {
@@ -1528,45 +1517,55 @@ static int nested_svm_exit_handled(struct vcpu_svm *svm, bool kvm_override)
 	}
 
 	switch (exit_code) {
+	case SVM_EXIT_MSR:
+		if (nested_svm_do(svm, svm->nested.vmcb, svm->nested.vmcb_msrpm,
+				  NULL, nested_svm_exit_handled_msr))
+			vmexit = true;
+		break;
 	case SVM_EXIT_READ_CR0 ... SVM_EXIT_READ_CR8: {
 		u32 cr_bits = 1 << (exit_code - SVM_EXIT_READ_CR0);
 		if (svm->nested.intercept_cr_read & cr_bits)
-			return 1;
+			vmexit = true;
 		break;
 	}
 	case SVM_EXIT_WRITE_CR0 ... SVM_EXIT_WRITE_CR8: {
 		u32 cr_bits = 1 << (exit_code - SVM_EXIT_WRITE_CR0);
 		if (svm->nested.intercept_cr_write & cr_bits)
-			return 1;
+			vmexit = true;
 		break;
 	}
 	case SVM_EXIT_READ_DR0 ... SVM_EXIT_READ_DR7: {
 		u32 dr_bits = 1 << (exit_code - SVM_EXIT_READ_DR0);
 		if (svm->nested.intercept_dr_read & dr_bits)
-			return 1;
+			vmexit = true;
 		break;
 	}
 	case SVM_EXIT_WRITE_DR0 ... SVM_EXIT_WRITE_DR7: {
 		u32 dr_bits = 1 << (exit_code - SVM_EXIT_WRITE_DR0);
 		if (svm->nested.intercept_dr_write & dr_bits)
-			return 1;
+			vmexit = true;
 		break;
 	}
 	case SVM_EXIT_EXCP_BASE ... SVM_EXIT_EXCP_BASE + 0x1f: {
 		u32 excp_bits = 1 << (exit_code - SVM_EXIT_EXCP_BASE);
 		if (svm->nested.intercept_exceptions & excp_bits)
-			return 1;
+			vmexit = true;
 		break;
 	}
 	default: {
 		u64 exit_bits = 1ULL << (exit_code - SVM_EXIT_INTR);
 		nsvm_printk("exit code: 0x%x\n", exit_code);
 		if (svm->nested.intercept & exit_bits)
-			return 1;
+			vmexit = true;
 	}
 	}
 
-	return 0;
+	if (vmexit) {
+		nsvm_printk("#VMEXIT reason=%04x\n", exit_code);
+		nested_svm_vmexit(svm);
+	}
+
+	return vmexit;
 }
 
 static inline void copy_vmcb_control_area(struct vmcb *dst_vmcb, struct vmcb *from_vmcb)
@@ -2327,11 +2326,8 @@ static int handle_exit(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
 		nsvm_printk("nested handle_exit: 0x%x | 0x%lx | 0x%lx | 0x%lx\n",
 			    exit_code, svm->vmcb->control.exit_info_1,
 			    svm->vmcb->control.exit_info_2, svm->vmcb->save.rip);
-		if (nested_svm_exit_handled(svm, true)) {
-			nested_svm_vmexit(svm);
-			nsvm_printk("-> #VMEXIT\n");
+		if (nested_svm_exit_handled(svm, true))
 			return 1;
-		}
 	}
 
 	svm_complete_interrupts(svm);
-- 
cgit v1.2.3


From 0295ad7de86a6347316bc7414c1b9c15f56a1333 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Fri, 7 Aug 2009 11:49:37 +0200
Subject: KVM: SVM: simplify nested_svm_check_exception

Makes the code of this function more readable by removing on
indentation level for the core logic.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/svm.c | 19 ++++++++-----------
 1 file changed, 8 insertions(+), 11 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 3bb6d4b92b3..67fad6641d5 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -1359,18 +1359,15 @@ static int nested_svm_check_permissions(struct vcpu_svm *svm)
 static int nested_svm_check_exception(struct vcpu_svm *svm, unsigned nr,
 				      bool has_error_code, u32 error_code)
 {
-	if (is_nested(svm)) {
-		svm->vmcb->control.exit_code = SVM_EXIT_EXCP_BASE + nr;
-		svm->vmcb->control.exit_code_hi = 0;
-		svm->vmcb->control.exit_info_1 = error_code;
-		svm->vmcb->control.exit_info_2 = svm->vcpu.arch.cr2;
-		if (nested_svm_exit_handled(svm, false)) {
-			nsvm_printk("VMexit -> EXCP 0x%x\n", nr);
-			return 1;
-		}
-	}
+	if (!is_nested(svm))
+		return 0;
 
-	return 0;
+	svm->vmcb->control.exit_code = SVM_EXIT_EXCP_BASE + nr;
+	svm->vmcb->control.exit_code_hi = 0;
+	svm->vmcb->control.exit_info_1 = error_code;
+	svm->vmcb->control.exit_info_2 = svm->vcpu.arch.cr2;
+
+	return nested_svm_exit_handled(svm, false);
 }
 
 static inline int nested_svm_intr(struct vcpu_svm *svm)
-- 
cgit v1.2.3


From 34f80cfad59ee587e374cbaf5f2a31d9f5015404 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Fri, 7 Aug 2009 11:49:38 +0200
Subject: KVM: SVM: get rid of nested_svm_vmexit_real

This patch is the starting point of removing nested_svm_do from the
nested svm code. The nested_svm_do function basically maps two guest
physical pages to host virtual addresses and calls a passed function
on it. This function pointer code flow is hard to read and not the
best technical solution here.
As a side effect this patch indroduces the nested_svm_[un]map helper
functions.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/svm.c | 52 ++++++++++++++++++++++++++++++++++++++++------------
 1 file changed, 40 insertions(+), 12 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 67fad6641d5..5e55a1bdd13 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -1390,6 +1390,39 @@ static inline int nested_svm_intr(struct vcpu_svm *svm)
 	return 0;
 }
 
+static void *nested_svm_map(struct vcpu_svm *svm, u64 gpa, enum km_type idx)
+{
+	struct page *page;
+
+	down_read(&current->mm->mmap_sem);
+	page = gfn_to_page(svm->vcpu.kvm, gpa >> PAGE_SHIFT);
+	up_read(&current->mm->mmap_sem);
+
+	if (is_error_page(page))
+		goto error;
+
+	return kmap_atomic(page, idx);
+
+error:
+	kvm_release_page_clean(page);
+	kvm_inject_gp(&svm->vcpu, 0);
+
+	return NULL;
+}
+
+static void nested_svm_unmap(void *addr, enum km_type idx)
+{
+	struct page *page;
+
+	if (!addr)
+		return;
+
+	page = kmap_atomic_to_page(addr);
+
+	kunmap_atomic(addr, idx);
+	kvm_release_page_dirty(page);
+}
+
 static struct page *nested_svm_get_page(struct vcpu_svm *svm, u64 gpa)
 {
 	struct page *page;
@@ -1597,13 +1630,16 @@ static inline void copy_vmcb_control_area(struct vmcb *dst_vmcb, struct vmcb *fr
 	dst->lbr_ctl              = from->lbr_ctl;
 }
 
-static int nested_svm_vmexit_real(struct vcpu_svm *svm, void *arg1,
-				  void *arg2, void *opaque)
+static int nested_svm_vmexit(struct vcpu_svm *svm)
 {
-	struct vmcb *nested_vmcb = (struct vmcb *)arg1;
+	struct vmcb *nested_vmcb;
 	struct vmcb *hsave = svm->nested.hsave;
 	struct vmcb *vmcb = svm->vmcb;
 
+	nested_vmcb = nested_svm_map(svm, svm->nested.vmcb, KM_USER0);
+	if (!nested_vmcb)
+		return 1;
+
 	/* Give the current vmcb to the guest */
 	disable_gif(svm);
 
@@ -1678,15 +1714,7 @@ static int nested_svm_vmexit_real(struct vcpu_svm *svm, void *arg1,
 	/* Exit nested SVM mode */
 	svm->nested.vmcb = 0;
 
-	return 0;
-}
-
-static int nested_svm_vmexit(struct vcpu_svm *svm)
-{
-	nsvm_printk("VMexit\n");
-	if (nested_svm_do(svm, svm->nested.vmcb, 0,
-			  NULL, nested_svm_vmexit_real))
-		return 1;
+	nested_svm_unmap(nested_vmcb, KM_USER0);
 
 	kvm_mmu_reset_context(&svm->vcpu);
 	kvm_mmu_load(&svm->vcpu);
-- 
cgit v1.2.3


From 3d62d9aa9868865217ce3a1b70d6039a98b50820 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Fri, 7 Aug 2009 11:49:39 +0200
Subject: KVM: SVM: clean up nested_svm_exit_handled_msr

This patch changes nested svm to call nested_svm_exit_handled_msr
directly and not through nested_svm_do.

[alex: fix oops due to nested kmap_atomics]

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/svm.c | 38 +++++++++++++++++++++-----------------
 1 file changed, 21 insertions(+), 17 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 5e55a1bdd13..e85d79142ff 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -1483,18 +1483,21 @@ static int nested_svm_do(struct vcpu_svm *svm,
 	return retval;
 }
 
-static int nested_svm_exit_handled_msr(struct vcpu_svm *svm,
-				       void *arg1, void *arg2,
-				       void *opaque)
+static bool nested_svm_exit_handled_msr(struct vcpu_svm *svm)
 {
-	struct vmcb *nested_vmcb = (struct vmcb *)arg1;
-	u8 *msrpm = (u8 *)arg2;
-	u32 t0, t1;
-	u32 msr = svm->vcpu.arch.regs[VCPU_REGS_RCX];
 	u32 param = svm->vmcb->control.exit_info_1 & 1;
+	u32 msr = svm->vcpu.arch.regs[VCPU_REGS_RCX];
+	bool ret = false;
+	u32 t0, t1;
+	u8 *msrpm;
 
-	if (!(nested_vmcb->control.intercept & (1ULL << INTERCEPT_MSR_PROT)))
-		return 0;
+	if (!(svm->nested.intercept & (1ULL << INTERCEPT_MSR_PROT)))
+		return false;
+
+	msrpm = nested_svm_map(svm, svm->nested.vmcb_msrpm, KM_USER0);
+
+	if (!msrpm)
+		goto out;
 
 	switch (msr) {
 	case 0 ... 0x1fff:
@@ -1512,13 +1515,16 @@ static int nested_svm_exit_handled_msr(struct vcpu_svm *svm,
 		t0 %= 8;
 		break;
 	default:
-		return 1;
-		break;
+		ret = true;
+		goto out;
 	}
-	if (msrpm[t1] & ((1 << param) << t0))
-		return 1;
 
-	return 0;
+	ret = msrpm[t1] & ((1 << param) << t0);
+
+out:
+	nested_svm_unmap(msrpm, KM_USER0);
+
+	return ret;
 }
 
 static int nested_svm_exit_handled(struct vcpu_svm *svm, bool kvm_override)
@@ -1548,9 +1554,7 @@ static int nested_svm_exit_handled(struct vcpu_svm *svm, bool kvm_override)
 
 	switch (exit_code) {
 	case SVM_EXIT_MSR:
-		if (nested_svm_do(svm, svm->nested.vmcb, svm->nested.vmcb_msrpm,
-				  NULL, nested_svm_exit_handled_msr))
-			vmexit = true;
+		vmexit = nested_svm_exit_handled_msr(svm);
 		break;
 	case SVM_EXIT_READ_CR0 ... SVM_EXIT_READ_CR8: {
 		u32 cr_bits = 1 << (exit_code - SVM_EXIT_READ_CR0);
-- 
cgit v1.2.3


From 9966bf6872598362b632b738213edfb5a961315d Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Fri, 7 Aug 2009 11:49:40 +0200
Subject: KVM: SVM: clean up nestec vmload/vmsave paths

This patch removes the usage of nested_svm_do from the vmload and
vmsave emulation code paths.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/svm.c | 36 +++++++++++++++++-------------------
 1 file changed, 17 insertions(+), 19 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index e85d79142ff..78c0463ccdd 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -128,8 +128,6 @@ static void svm_complete_interrupts(struct vcpu_svm *svm);
 
 static int nested_svm_exit_handled(struct vcpu_svm *svm, bool kvm_override);
 static int nested_svm_vmexit(struct vcpu_svm *svm);
-static int nested_svm_vmsave(struct vcpu_svm *svm, void *nested_vmcb,
-			     void *arg2, void *opaque);
 static int nested_svm_check_exception(struct vcpu_svm *svm, unsigned nr,
 				      bool has_error_code, u32 error_code);
 
@@ -1865,7 +1863,7 @@ static int nested_svm_vmrun(struct vcpu_svm *svm, void *arg1,
 	return 0;
 }
 
-static int nested_svm_vmloadsave(struct vmcb *from_vmcb, struct vmcb *to_vmcb)
+static void nested_svm_vmloadsave(struct vmcb *from_vmcb, struct vmcb *to_vmcb)
 {
 	to_vmcb->save.fs = from_vmcb->save.fs;
 	to_vmcb->save.gs = from_vmcb->save.gs;
@@ -1879,44 +1877,44 @@ static int nested_svm_vmloadsave(struct vmcb *from_vmcb, struct vmcb *to_vmcb)
 	to_vmcb->save.sysenter_cs = from_vmcb->save.sysenter_cs;
 	to_vmcb->save.sysenter_esp = from_vmcb->save.sysenter_esp;
 	to_vmcb->save.sysenter_eip = from_vmcb->save.sysenter_eip;
-
-	return 1;
-}
-
-static int nested_svm_vmload(struct vcpu_svm *svm, void *nested_vmcb,
-			     void *arg2, void *opaque)
-{
-	return nested_svm_vmloadsave((struct vmcb *)nested_vmcb, svm->vmcb);
-}
-
-static int nested_svm_vmsave(struct vcpu_svm *svm, void *nested_vmcb,
-			     void *arg2, void *opaque)
-{
-	return nested_svm_vmloadsave(svm->vmcb, (struct vmcb *)nested_vmcb);
 }
 
 static int vmload_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 {
+	struct vmcb *nested_vmcb;
+
 	if (nested_svm_check_permissions(svm))
 		return 1;
 
 	svm->next_rip = kvm_rip_read(&svm->vcpu) + 3;
 	skip_emulated_instruction(&svm->vcpu);
 
-	nested_svm_do(svm, svm->vmcb->save.rax, 0, NULL, nested_svm_vmload);
+	nested_vmcb = nested_svm_map(svm, svm->vmcb->save.rax, KM_USER0);
+	if (!nested_vmcb)
+		return 1;
+
+	nested_svm_vmloadsave(nested_vmcb, svm->vmcb);
+	nested_svm_unmap(nested_vmcb, KM_USER0);
 
 	return 1;
 }
 
 static int vmsave_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 {
+	struct vmcb *nested_vmcb;
+
 	if (nested_svm_check_permissions(svm))
 		return 1;
 
 	svm->next_rip = kvm_rip_read(&svm->vcpu) + 3;
 	skip_emulated_instruction(&svm->vcpu);
 
-	nested_svm_do(svm, svm->vmcb->save.rax, 0, NULL, nested_svm_vmsave);
+	nested_vmcb = nested_svm_map(svm, svm->vmcb->save.rax, KM_USER0);
+	if (!nested_vmcb)
+		return 1;
+
+	nested_svm_vmloadsave(svm->vmcb, nested_vmcb);
+	nested_svm_unmap(nested_vmcb, KM_USER0);
 
 	return 1;
 }
-- 
cgit v1.2.3


From 9738b2c97d19d87e5c204ae8c3f715a546bb6773 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Fri, 7 Aug 2009 11:49:41 +0200
Subject: KVM: SVM: clean up nested vmrun path

This patch removes the usage of nested_svm_do from the vmrun emulation
path.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/svm.c | 34 ++++++++++++++++++++++------------
 1 file changed, 22 insertions(+), 12 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 78c0463ccdd..68b6d4cdd15 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -1724,25 +1724,35 @@ static int nested_svm_vmexit(struct vcpu_svm *svm)
 	return 0;
 }
 
-static int nested_svm_vmrun_msrpm(struct vcpu_svm *svm, void *arg1,
-				  void *arg2, void *opaque)
+static bool nested_svm_vmrun_msrpm(struct vcpu_svm *svm)
 {
+	u32 *nested_msrpm;
 	int i;
-	u32 *nested_msrpm = (u32*)arg1;
+
+	nested_msrpm = nested_svm_map(svm, svm->nested.vmcb_msrpm, KM_USER0);
+	if (!nested_msrpm)
+		return false;
+
 	for (i=0; i< PAGE_SIZE * (1 << MSRPM_ALLOC_ORDER) / 4; i++)
 		svm->nested.msrpm[i] = svm->msrpm[i] | nested_msrpm[i];
+
 	svm->vmcb->control.msrpm_base_pa = __pa(svm->nested.msrpm);
 
-	return 0;
+	nested_svm_unmap(nested_msrpm, KM_USER0);
+
+	return true;
 }
 
-static int nested_svm_vmrun(struct vcpu_svm *svm, void *arg1,
-			    void *arg2, void *opaque)
+static bool nested_svm_vmrun(struct vcpu_svm *svm)
 {
-	struct vmcb *nested_vmcb = (struct vmcb *)arg1;
+	struct vmcb *nested_vmcb;
 	struct vmcb *hsave = svm->nested.hsave;
 	struct vmcb *vmcb = svm->vmcb;
 
+	nested_vmcb = nested_svm_map(svm, svm->vmcb->save.rax, KM_USER0);
+	if (!nested_vmcb)
+		return false;
+
 	/* nested_vmcb is our indicator if nested SVM is activated */
 	svm->nested.vmcb = svm->vmcb->save.rax;
 
@@ -1858,9 +1868,11 @@ static int nested_svm_vmrun(struct vcpu_svm *svm, void *arg1,
 	svm->vmcb->control.event_inj = nested_vmcb->control.event_inj;
 	svm->vmcb->control.event_inj_err = nested_vmcb->control.event_inj_err;
 
+	nested_svm_unmap(nested_vmcb, KM_USER0);
+
 	enable_gif(svm);
 
-	return 0;
+	return true;
 }
 
 static void nested_svm_vmloadsave(struct vmcb *from_vmcb, struct vmcb *to_vmcb)
@@ -1928,12 +1940,10 @@ static int vmrun_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 	svm->next_rip = kvm_rip_read(&svm->vcpu) + 3;
 	skip_emulated_instruction(&svm->vcpu);
 
-	if (nested_svm_do(svm, svm->vmcb->save.rax, 0,
-			  NULL, nested_svm_vmrun))
+	if (!nested_svm_vmrun(svm))
 		return 1;
 
-	if (nested_svm_do(svm, svm->nested.vmcb_msrpm, 0,
-		      NULL, nested_svm_vmrun_msrpm))
+	if (!nested_svm_vmrun_msrpm(svm))
 		return 1;
 
 	return 1;
-- 
cgit v1.2.3


From ea8e064fe22a132da1473d82a57751208e6b8bfd Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Fri, 7 Aug 2009 11:49:42 +0200
Subject: KVM: SVM: remove nested_svm_do and helper functions

This function is not longer required. So remove it.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/svm.c | 60 ------------------------------------------------------
 1 file changed, 60 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 68b6d4cdd15..d458297d54c 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -1421,66 +1421,6 @@ static void nested_svm_unmap(void *addr, enum km_type idx)
 	kvm_release_page_dirty(page);
 }
 
-static struct page *nested_svm_get_page(struct vcpu_svm *svm, u64 gpa)
-{
-	struct page *page;
-
-	down_read(&current->mm->mmap_sem);
-	page = gfn_to_page(svm->vcpu.kvm, gpa >> PAGE_SHIFT);
-	up_read(&current->mm->mmap_sem);
-
-	if (is_error_page(page)) {
-		printk(KERN_INFO "%s: could not find page at 0x%llx\n",
-		       __func__, gpa);
-		kvm_release_page_clean(page);
-		kvm_inject_gp(&svm->vcpu, 0);
-		return NULL;
-	}
-	return page;
-}
-
-static int nested_svm_do(struct vcpu_svm *svm,
-			 u64 arg1_gpa, u64 arg2_gpa, void *opaque,
-			 int (*handler)(struct vcpu_svm *svm,
-					void *arg1,
-					void *arg2,
-					void *opaque))
-{
-	struct page *arg1_page;
-	struct page *arg2_page = NULL;
-	void *arg1;
-	void *arg2 = NULL;
-	int retval;
-
-	arg1_page = nested_svm_get_page(svm, arg1_gpa);
-	if(arg1_page == NULL)
-		return 1;
-
-	if (arg2_gpa) {
-		arg2_page = nested_svm_get_page(svm, arg2_gpa);
-		if(arg2_page == NULL) {
-			kvm_release_page_clean(arg1_page);
-			return 1;
-		}
-	}
-
-	arg1 = kmap_atomic(arg1_page, KM_USER0);
-	if (arg2_gpa)
-		arg2 = kmap_atomic(arg2_page, KM_USER1);
-
-	retval = handler(svm, arg1, arg2, opaque);
-
-	kunmap_atomic(arg1, KM_USER0);
-	if (arg2_gpa)
-		kunmap_atomic(arg2, KM_USER1);
-
-	kvm_release_page_dirty(arg1_page);
-	if (arg2_gpa)
-		kvm_release_page_dirty(arg2_page);
-
-	return retval;
-}
-
 static bool nested_svm_exit_handled_msr(struct vcpu_svm *svm)
 {
 	u32 param = svm->vmcb->control.exit_info_1 & 1;
-- 
cgit v1.2.3


From 1f8da47805072e89454ccfdada553c2afc4dfb79 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Fri, 7 Aug 2009 11:49:43 +0200
Subject: KVM: SVM: handle errors in vmrun emulation path appropriatly

If nested svm fails to load the msrpm the vmrun succeeds with the old
msrpm which is not correct. This patch changes the logic to roll back
to host mode in case the msrpm cannot be loaded.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/svm.c | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index d458297d54c..53376f144d7 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -1874,6 +1874,7 @@ static int vmsave_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 static int vmrun_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 {
 	nsvm_printk("VMrun\n");
+
 	if (nested_svm_check_permissions(svm))
 		return 1;
 
@@ -1884,7 +1885,18 @@ static int vmrun_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 		return 1;
 
 	if (!nested_svm_vmrun_msrpm(svm))
-		return 1;
+		goto failed;
+
+	return 1;
+
+failed:
+
+	svm->vmcb->control.exit_code    = SVM_EXIT_ERR;
+	svm->vmcb->control.exit_code_hi = 0;
+	svm->vmcb->control.exit_info_1  = 0;
+	svm->vmcb->control.exit_info_2  = 0;
+
+	nested_svm_vmexit(svm);
 
 	return 1;
 }
-- 
cgit v1.2.3


From 410e4d573d9b7fbd134f9a47815b6ad517492a08 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Fri, 7 Aug 2009 11:49:44 +0200
Subject: KVM: SVM: move special nested exit handling to separate function

This patch moves the handling for special nested vmexits like #pf to a
separate function. This makes the kvm_override parameter obsolete and
makes the code more readable.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/svm.c | 80 ++++++++++++++++++++++++++++++++++--------------------
 1 file changed, 50 insertions(+), 30 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 53376f144d7..be28a38db91 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -47,6 +47,10 @@ MODULE_LICENSE("GPL");
 #define SVM_FEATURE_LBRV (1 << 1)
 #define SVM_FEATURE_SVML (1 << 2)
 
+#define NESTED_EXIT_HOST	0	/* Exit handled on host level */
+#define NESTED_EXIT_DONE	1	/* Exit caused nested vmexit  */
+#define NESTED_EXIT_CONTINUE	2	/* Further checks needed      */
+
 #define DEBUGCTL_RESERVED_BITS (~(0x3fULL))
 
 /* Turn on to get debugging output*/
@@ -126,7 +130,7 @@ module_param(nested, int, S_IRUGO);
 static void svm_flush_tlb(struct kvm_vcpu *vcpu);
 static void svm_complete_interrupts(struct vcpu_svm *svm);
 
-static int nested_svm_exit_handled(struct vcpu_svm *svm, bool kvm_override);
+static int nested_svm_exit_handled(struct vcpu_svm *svm);
 static int nested_svm_vmexit(struct vcpu_svm *svm);
 static int nested_svm_check_exception(struct vcpu_svm *svm, unsigned nr,
 				      bool has_error_code, u32 error_code);
@@ -1365,7 +1369,7 @@ static int nested_svm_check_exception(struct vcpu_svm *svm, unsigned nr,
 	svm->vmcb->control.exit_info_1 = error_code;
 	svm->vmcb->control.exit_info_2 = svm->vcpu.arch.cr2;
 
-	return nested_svm_exit_handled(svm, false);
+	return nested_svm_exit_handled(svm);
 }
 
 static inline int nested_svm_intr(struct vcpu_svm *svm)
@@ -1379,7 +1383,7 @@ static inline int nested_svm_intr(struct vcpu_svm *svm)
 
 		svm->vmcb->control.exit_code = SVM_EXIT_INTR;
 
-		if (nested_svm_exit_handled(svm, false)) {
+		if (nested_svm_exit_handled(svm)) {
 			nsvm_printk("VMexit -> INTR\n");
 			return 1;
 		}
@@ -1465,31 +1469,39 @@ out:
 	return ret;
 }
 
-static int nested_svm_exit_handled(struct vcpu_svm *svm, bool kvm_override)
+static int nested_svm_exit_special(struct vcpu_svm *svm)
 {
 	u32 exit_code = svm->vmcb->control.exit_code;
-	bool vmexit = false;
 
-	if (kvm_override) {
-		switch (exit_code) {
-		case SVM_EXIT_INTR:
-		case SVM_EXIT_NMI:
-			return 0;
+	switch (exit_code) {
+	case SVM_EXIT_INTR:
+	case SVM_EXIT_NMI:
+		return NESTED_EXIT_HOST;
 		/* For now we are always handling NPFs when using them */
-		case SVM_EXIT_NPF:
-			if (npt_enabled)
-				return 0;
-			break;
-		/* When we're shadowing, trap PFs */
-		case SVM_EXIT_EXCP_BASE + PF_VECTOR:
-			if (!npt_enabled)
-				return 0;
-			break;
-		default:
-			break;
-		}
+	case SVM_EXIT_NPF:
+		if (npt_enabled)
+			return NESTED_EXIT_HOST;
+		break;
+	/* When we're shadowing, trap PFs */
+	case SVM_EXIT_EXCP_BASE + PF_VECTOR:
+		if (!npt_enabled)
+			return NESTED_EXIT_HOST;
+		break;
+	default:
+		break;
 	}
 
+	return NESTED_EXIT_CONTINUE;
+}
+
+/*
+ * If this function returns true, this #vmexit was already handled
+ */
+static int nested_svm_exit_handled(struct vcpu_svm *svm)
+{
+	u32 exit_code = svm->vmcb->control.exit_code;
+	int vmexit = NESTED_EXIT_HOST;
+
 	switch (exit_code) {
 	case SVM_EXIT_MSR:
 		vmexit = nested_svm_exit_handled_msr(svm);
@@ -1497,42 +1509,42 @@ static int nested_svm_exit_handled(struct vcpu_svm *svm, bool kvm_override)
 	case SVM_EXIT_READ_CR0 ... SVM_EXIT_READ_CR8: {
 		u32 cr_bits = 1 << (exit_code - SVM_EXIT_READ_CR0);
 		if (svm->nested.intercept_cr_read & cr_bits)
-			vmexit = true;
+			vmexit = NESTED_EXIT_DONE;
 		break;
 	}
 	case SVM_EXIT_WRITE_CR0 ... SVM_EXIT_WRITE_CR8: {
 		u32 cr_bits = 1 << (exit_code - SVM_EXIT_WRITE_CR0);
 		if (svm->nested.intercept_cr_write & cr_bits)
-			vmexit = true;
+			vmexit = NESTED_EXIT_DONE;
 		break;
 	}
 	case SVM_EXIT_READ_DR0 ... SVM_EXIT_READ_DR7: {
 		u32 dr_bits = 1 << (exit_code - SVM_EXIT_READ_DR0);
 		if (svm->nested.intercept_dr_read & dr_bits)
-			vmexit = true;
+			vmexit = NESTED_EXIT_DONE;
 		break;
 	}
 	case SVM_EXIT_WRITE_DR0 ... SVM_EXIT_WRITE_DR7: {
 		u32 dr_bits = 1 << (exit_code - SVM_EXIT_WRITE_DR0);
 		if (svm->nested.intercept_dr_write & dr_bits)
-			vmexit = true;
+			vmexit = NESTED_EXIT_DONE;
 		break;
 	}
 	case SVM_EXIT_EXCP_BASE ... SVM_EXIT_EXCP_BASE + 0x1f: {
 		u32 excp_bits = 1 << (exit_code - SVM_EXIT_EXCP_BASE);
 		if (svm->nested.intercept_exceptions & excp_bits)
-			vmexit = true;
+			vmexit = NESTED_EXIT_DONE;
 		break;
 	}
 	default: {
 		u64 exit_bits = 1ULL << (exit_code - SVM_EXIT_INTR);
 		nsvm_printk("exit code: 0x%x\n", exit_code);
 		if (svm->nested.intercept & exit_bits)
-			vmexit = true;
+			vmexit = NESTED_EXIT_DONE;
 	}
 	}
 
-	if (vmexit) {
+	if (vmexit == NESTED_EXIT_DONE) {
 		nsvm_printk("#VMEXIT reason=%04x\n", exit_code);
 		nested_svm_vmexit(svm);
 	}
@@ -2312,10 +2324,18 @@ static int handle_exit(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
 	trace_kvm_exit(exit_code, svm->vmcb->save.rip);
 
 	if (is_nested(svm)) {
+		int vmexit;
+
 		nsvm_printk("nested handle_exit: 0x%x | 0x%lx | 0x%lx | 0x%lx\n",
 			    exit_code, svm->vmcb->control.exit_info_1,
 			    svm->vmcb->control.exit_info_2, svm->vmcb->save.rip);
-		if (nested_svm_exit_handled(svm, true))
+
+		vmexit = nested_svm_exit_special(svm);
+
+		if (vmexit == NESTED_EXIT_CONTINUE)
+			vmexit = nested_svm_exit_handled(svm);
+
+		if (vmexit == NESTED_EXIT_DONE)
 			return 1;
 	}
 
-- 
cgit v1.2.3


From cda0ffdd862d36d0b054249ce920f00d1dbae037 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Fri, 7 Aug 2009 11:49:45 +0200
Subject: KVM: SVM: remove unnecessary is_nested check from svm_cpu_run

This check is not necessary. We have to sync the vcpu->arch.cr2 always
back to the VMCB. This patch remove the is_nested check.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/svm.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index be28a38db91..a1cfa7d57ab 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -2602,8 +2602,7 @@ static void svm_vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	fs_selector = kvm_read_fs();
 	gs_selector = kvm_read_gs();
 	ldt_selector = kvm_read_ldt();
-	if (!is_nested(svm))
-		svm->vmcb->save.cr2 = vcpu->arch.cr2;
+	svm->vmcb->save.cr2 = vcpu->arch.cr2;
 	/* required for live migration with NPT */
 	if (npt_enabled)
 		svm->vmcb->save.cr3 = vcpu->arch.cr3;
-- 
cgit v1.2.3


From 26666957a58fab7c8a4a31f1ab24d3bbf4c58c7a Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Fri, 7 Aug 2009 11:49:46 +0200
Subject: KVM: SVM: move nested_svm_intr main logic out of if-clause

This patch removes one indentation level from nested_svm_intr and
makes the logic more readable.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/svm.c | 21 +++++++++++----------
 1 file changed, 11 insertions(+), 10 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index a1cfa7d57ab..144f2025799 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -1374,19 +1374,20 @@ static int nested_svm_check_exception(struct vcpu_svm *svm, unsigned nr,
 
 static inline int nested_svm_intr(struct vcpu_svm *svm)
 {
-	if (is_nested(svm)) {
-		if (!(svm->vcpu.arch.hflags & HF_VINTR_MASK))
-			return 0;
+	if (!is_nested(svm))
+		return 0;
 
-		if (!(svm->vcpu.arch.hflags & HF_HIF_MASK))
-			return 0;
+	if (!(svm->vcpu.arch.hflags & HF_VINTR_MASK))
+		return 0;
 
-		svm->vmcb->control.exit_code = SVM_EXIT_INTR;
+	if (!(svm->vcpu.arch.hflags & HF_HIF_MASK))
+		return 0;
 
-		if (nested_svm_exit_handled(svm)) {
-			nsvm_printk("VMexit -> INTR\n");
-			return 1;
-		}
+	svm->vmcb->control.exit_code = SVM_EXIT_INTR;
+
+	if (nested_svm_exit_handled(svm)) {
+		nsvm_printk("VMexit -> INTR\n");
+		return 1;
 	}
 
 	return 0;
-- 
cgit v1.2.3


From 108768de55949c778bd95b36f3b17e652e59cd5b Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Fri, 7 Aug 2009 11:49:47 +0200
Subject: KVM: SVM: check for nested VINTR flag in svm_interrupt_allowed

Not checking for this flag breaks any nested hypervisor that does not
set VINTR. So fix it with this patch.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/svm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 144f2025799..6610f60b4c9 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -2463,7 +2463,7 @@ static int svm_interrupt_allowed(struct kvm_vcpu *vcpu)
 	return (vmcb->save.rflags & X86_EFLAGS_IF) &&
 		!(vmcb->control.int_state & SVM_INTERRUPT_SHADOW_MASK) &&
 		gif_set(svm) &&
-		!is_nested(svm);
+		!(is_nested(svm) && (svm->vcpu.arch.hflags & HF_VINTR_MASK));
 }
 
 static void enable_irq_window(struct kvm_vcpu *vcpu)
-- 
cgit v1.2.3


From 4b6e4dca7011613c8508640c10a091b3ed2cd215 Mon Sep 17 00:00:00 2001
From: Joerg Roedel <joerg.roedel@amd.com>
Date: Fri, 7 Aug 2009 11:49:48 +0200
Subject: KVM: SVM: enable nested svm by default

Nested SVM is (in my experience) stable enough to be enabled by
default. So omit the requirement to pass a module parameter.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/svm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 6610f60b4c9..8f7751a66a2 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -124,7 +124,7 @@ static int npt = 1;
 
 module_param(npt, int, S_IRUGO);
 
-static int nested = 0;
+static int nested = 1;
 module_param(nested, int, S_IRUGO);
 
 static void svm_flush_tlb(struct kvm_vcpu *vcpu);
-- 
cgit v1.2.3


From cb142eb743d02d48165c9d941b601d731cc4a003 Mon Sep 17 00:00:00 2001
From: Gleb Natapov <gleb@redhat.com>
Date: Sun, 9 Aug 2009 15:17:40 +0300
Subject: KVM: Update cr8 intercept when APIC TPR is changed by userspace

Since on vcpu entry we do it only if apic is enabled we should do
it when TPR is changed while apic is disabled. This happens when windows
resets HW without setting TPR to zero.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/x86.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 132c5100d4f..31bf98427f4 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -77,6 +77,7 @@ static u64 __read_mostly efer_reserved_bits = 0xfffffffffffffffeULL;
 #define VM_STAT(x) offsetof(struct kvm, stat.x), KVM_STAT_VM
 #define VCPU_STAT(x) offsetof(struct kvm_vcpu, stat.x), KVM_STAT_VCPU
 
+static void update_cr8_intercept(struct kvm_vcpu *vcpu);
 static int kvm_dev_ioctl_get_supported_cpuid(struct kvm_cpuid2 *cpuid,
 				    struct kvm_cpuid_entry2 __user *entries);
 
@@ -1629,6 +1630,7 @@ static int kvm_vcpu_ioctl_set_lapic(struct kvm_vcpu *vcpu,
 	vcpu_load(vcpu);
 	memcpy(vcpu->arch.apic->regs, s->regs, sizeof *s);
 	kvm_apic_post_state_restore(vcpu);
+	update_cr8_intercept(vcpu);
 	vcpu_put(vcpu);
 
 	return 0;
-- 
cgit v1.2.3


From 52c7847d121da3651c08d9e9a99eb8a7cf2faa7a Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Mon, 10 Aug 2009 15:42:41 +0300
Subject: KVM: SVM: Drop tlb flush workaround in npt

It is no longer possible to reproduce the problem any more, so presumably
it has been fixed.

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/svm.c | 13 ++-----------
 1 file changed, 2 insertions(+), 11 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 8f7751a66a2..944cc9c04b3 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -1187,17 +1187,8 @@ static int pf_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 	error_code = svm->vmcb->control.exit_info_1;
 
 	trace_kvm_page_fault(fault_address, error_code);
-	/*
-	 * FIXME: Tis shouldn't be necessary here, but there is a flush
-	 * missing in the MMU code. Until we find this bug, flush the
-	 * complete TLB here on an NPF
-	 */
-	if (npt_enabled)
-		svm_flush_tlb(&svm->vcpu);
-	else {
-		if (kvm_event_needs_reinjection(&svm->vcpu))
-			kvm_mmu_unprotect_page_virt(&svm->vcpu, fault_address);
-	}
+	if (!npt_enabled && kvm_event_needs_reinjection(&svm->vcpu))
+		kvm_mmu_unprotect_page_virt(&svm->vcpu, fault_address);
 	return kvm_mmu_page_fault(&svm->vcpu, fault_address, error_code);
 }
 
-- 
cgit v1.2.3


From 345dcaa8fde7fa70252d58c862bf41fd2149ca2c Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Wed, 12 Aug 2009 15:29:37 +0300
Subject: KVM: VMX: Adjust rflags if in real mode emulation

We set rflags.vm86 when virtualizing real mode to do through vm8086 mode;
so we need to take it out again when reading rflags.

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/vmx.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 31c3a8740c4..2b7e7bd190f 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -781,7 +781,12 @@ static void vmx_fpu_deactivate(struct kvm_vcpu *vcpu)
 
 static unsigned long vmx_get_rflags(struct kvm_vcpu *vcpu)
 {
-	return vmcs_readl(GUEST_RFLAGS);
+	unsigned long rflags;
+
+	rflags = vmcs_readl(GUEST_RFLAGS);
+	if (to_vmx(vcpu)->rmode.vm86_active)
+		rflags &= ~(unsigned long)(X86_EFLAGS_IOPL | X86_EFLAGS_VM);
+	return rflags;
 }
 
 static void vmx_set_rflags(struct kvm_vcpu *vcpu, unsigned long rflags)
-- 
cgit v1.2.3


From c0c7c04b874bf98a10d8e0c8322a5d3bc93536bc Mon Sep 17 00:00:00 2001
From: Anthony Liguori <aliguori@us.ibm.com>
Date: Tue, 11 Aug 2009 15:57:59 -0500
Subject: KVM: When switching to a vm8086 task, load segments as 16-bit

According to 16.2.5 in the SDM, eflags.vm in the tss is consulted before loading
and new segments.  If eflags.vm == 1, then the segments are treated as 16-bit
segments.  The LDTR and TR are not normally available in vm86 mode so if they
happen to somehow get loaded, they need to be treated as 32-bit segments.

This fixes an invalid vmentry failure in a custom OS that was happening after
a task switch into vm8086 mode.  Since the segments were being mistakenly
treated as 32-bit, we loaded garbage state.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/x86.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 31bf98427f4..1aa7e6d91d4 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -4101,12 +4101,19 @@ static int kvm_load_realmode_segment(struct kvm_vcpu *vcpu, u16 selector, int se
 	return 0;
 }
 
+static int is_vm86_segment(struct kvm_vcpu *vcpu, int seg)
+{
+	return (seg != VCPU_SREG_LDTR) &&
+		(seg != VCPU_SREG_TR) &&
+		(kvm_x86_ops->get_rflags(vcpu) & X86_EFLAGS_VM);
+}
+
 int kvm_load_segment_descriptor(struct kvm_vcpu *vcpu, u16 selector,
 				int type_bits, int seg)
 {
 	struct kvm_segment kvm_seg;
 
-	if (!(vcpu->arch.cr0 & X86_CR0_PE))
+	if (is_vm86_segment(vcpu, seg) || !(vcpu->arch.cr0 & X86_CR0_PE))
 		return kvm_load_realmode_segment(vcpu, selector, seg);
 	if (load_segment_descriptor_to_kvm_desct(vcpu, selector, &kvm_seg))
 		return 1;
-- 
cgit v1.2.3


From 56e8231841301ad38e347e33fd4319c89f697045 Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Wed, 12 Aug 2009 15:04:37 +0300
Subject: KVM: Rename x86_emulate.c to emulate.c

We're in arch/x86, what could we possibly be emulating?

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/include/asm/kvm_emulate.h     |  187 +++
 arch/x86/include/asm/kvm_host.h        |    2 +-
 arch/x86/include/asm/kvm_x86_emulate.h |  187 ---
 arch/x86/kvm/Makefile                  |    2 +-
 arch/x86/kvm/emulate.c                 | 2392 ++++++++++++++++++++++++++++++++
 arch/x86/kvm/x86.c                     |    2 +-
 arch/x86/kvm/x86_emulate.c             | 2392 --------------------------------
 7 files changed, 2582 insertions(+), 2582 deletions(-)
 create mode 100644 arch/x86/include/asm/kvm_emulate.h
 delete mode 100644 arch/x86/include/asm/kvm_x86_emulate.h
 create mode 100644 arch/x86/kvm/emulate.c
 delete mode 100644 arch/x86/kvm/x86_emulate.c

(limited to 'arch')

diff --git a/arch/x86/include/asm/kvm_emulate.h b/arch/x86/include/asm/kvm_emulate.h
new file mode 100644
index 00000000000..b7ed2c42311
--- /dev/null
+++ b/arch/x86/include/asm/kvm_emulate.h
@@ -0,0 +1,187 @@
+/******************************************************************************
+ * x86_emulate.h
+ *
+ * Generic x86 (32-bit and 64-bit) instruction decoder and emulator.
+ *
+ * Copyright (c) 2005 Keir Fraser
+ *
+ * From: xen-unstable 10676:af9809f51f81a3c43f276f00c81a52ef558afda4
+ */
+
+#ifndef _ASM_X86_KVM_X86_EMULATE_H
+#define _ASM_X86_KVM_X86_EMULATE_H
+
+struct x86_emulate_ctxt;
+
+/*
+ * x86_emulate_ops:
+ *
+ * These operations represent the instruction emulator's interface to memory.
+ * There are two categories of operation: those that act on ordinary memory
+ * regions (*_std), and those that act on memory regions known to require
+ * special treatment or emulation (*_emulated).
+ *
+ * The emulator assumes that an instruction accesses only one 'emulated memory'
+ * location, that this location is the given linear faulting address (cr2), and
+ * that this is one of the instruction's data operands. Instruction fetches and
+ * stack operations are assumed never to access emulated memory. The emulator
+ * automatically deduces which operand of a string-move operation is accessing
+ * emulated memory, and assumes that the other operand accesses normal memory.
+ *
+ * NOTES:
+ *  1. The emulator isn't very smart about emulated vs. standard memory.
+ *     'Emulated memory' access addresses should be checked for sanity.
+ *     'Normal memory' accesses may fault, and the caller must arrange to
+ *     detect and handle reentrancy into the emulator via recursive faults.
+ *     Accesses may be unaligned and may cross page boundaries.
+ *  2. If the access fails (cannot emulate, or a standard access faults) then
+ *     it is up to the memop to propagate the fault to the guest VM via
+ *     some out-of-band mechanism, unknown to the emulator. The memop signals
+ *     failure by returning X86EMUL_PROPAGATE_FAULT to the emulator, which will
+ *     then immediately bail.
+ *  3. Valid access sizes are 1, 2, 4 and 8 bytes. On x86/32 systems only
+ *     cmpxchg8b_emulated need support 8-byte accesses.
+ *  4. The emulator cannot handle 64-bit mode emulation on an x86/32 system.
+ */
+/* Access completed successfully: continue emulation as normal. */
+#define X86EMUL_CONTINUE        0
+/* Access is unhandleable: bail from emulation and return error to caller. */
+#define X86EMUL_UNHANDLEABLE    1
+/* Terminate emulation but return success to the caller. */
+#define X86EMUL_PROPAGATE_FAULT 2 /* propagate a generated fault to guest */
+#define X86EMUL_RETRY_INSTR     2 /* retry the instruction for some reason */
+#define X86EMUL_CMPXCHG_FAILED  2 /* cmpxchg did not see expected value */
+struct x86_emulate_ops {
+	/*
+	 * read_std: Read bytes of standard (non-emulated/special) memory.
+	 *           Used for instruction fetch, stack operations, and others.
+	 *  @addr:  [IN ] Linear address from which to read.
+	 *  @val:   [OUT] Value read from memory, zero-extended to 'u_long'.
+	 *  @bytes: [IN ] Number of bytes to read from memory.
+	 */
+	int (*read_std)(unsigned long addr, void *val,
+			unsigned int bytes, struct kvm_vcpu *vcpu);
+
+	/*
+	 * read_emulated: Read bytes from emulated/special memory area.
+	 *  @addr:  [IN ] Linear address from which to read.
+	 *  @val:   [OUT] Value read from memory, zero-extended to 'u_long'.
+	 *  @bytes: [IN ] Number of bytes to read from memory.
+	 */
+	int (*read_emulated)(unsigned long addr,
+			     void *val,
+			     unsigned int bytes,
+			     struct kvm_vcpu *vcpu);
+
+	/*
+	 * write_emulated: Read bytes from emulated/special memory area.
+	 *  @addr:  [IN ] Linear address to which to write.
+	 *  @val:   [IN ] Value to write to memory (low-order bytes used as
+	 *                required).
+	 *  @bytes: [IN ] Number of bytes to write to memory.
+	 */
+	int (*write_emulated)(unsigned long addr,
+			      const void *val,
+			      unsigned int bytes,
+			      struct kvm_vcpu *vcpu);
+
+	/*
+	 * cmpxchg_emulated: Emulate an atomic (LOCKed) CMPXCHG operation on an
+	 *                   emulated/special memory area.
+	 *  @addr:  [IN ] Linear address to access.
+	 *  @old:   [IN ] Value expected to be current at @addr.
+	 *  @new:   [IN ] Value to write to @addr.
+	 *  @bytes: [IN ] Number of bytes to access using CMPXCHG.
+	 */
+	int (*cmpxchg_emulated)(unsigned long addr,
+				const void *old,
+				const void *new,
+				unsigned int bytes,
+				struct kvm_vcpu *vcpu);
+
+};
+
+/* Type, address-of, and value of an instruction's operand. */
+struct operand {
+	enum { OP_REG, OP_MEM, OP_IMM, OP_NONE } type;
+	unsigned int bytes;
+	unsigned long val, orig_val, *ptr;
+};
+
+struct fetch_cache {
+	u8 data[15];
+	unsigned long start;
+	unsigned long end;
+};
+
+struct decode_cache {
+	u8 twobyte;
+	u8 b;
+	u8 lock_prefix;
+	u8 rep_prefix;
+	u8 op_bytes;
+	u8 ad_bytes;
+	u8 rex_prefix;
+	struct operand src;
+	struct operand src2;
+	struct operand dst;
+	bool has_seg_override;
+	u8 seg_override;
+	unsigned int d;
+	unsigned long regs[NR_VCPU_REGS];
+	unsigned long eip;
+	/* modrm */
+	u8 modrm;
+	u8 modrm_mod;
+	u8 modrm_reg;
+	u8 modrm_rm;
+	u8 use_modrm_ea;
+	bool rip_relative;
+	unsigned long modrm_ea;
+	void *modrm_ptr;
+	unsigned long modrm_val;
+	struct fetch_cache fetch;
+};
+
+#define X86_SHADOW_INT_MOV_SS  1
+#define X86_SHADOW_INT_STI     2
+
+struct x86_emulate_ctxt {
+	/* Register state before/after emulation. */
+	struct kvm_vcpu *vcpu;
+
+	unsigned long eflags;
+	/* Emulated execution mode, represented by an X86EMUL_MODE value. */
+	int mode;
+	u32 cs_base;
+
+	/* interruptibility state, as a result of execution of STI or MOV SS */
+	int interruptibility;
+
+	/* decode cache */
+	struct decode_cache decode;
+};
+
+/* Repeat String Operation Prefix */
+#define REPE_PREFIX	1
+#define REPNE_PREFIX	2
+
+/* Execution mode, passed to the emulator. */
+#define X86EMUL_MODE_REAL     0	/* Real mode.             */
+#define X86EMUL_MODE_PROT16   2	/* 16-bit protected mode. */
+#define X86EMUL_MODE_PROT32   4	/* 32-bit protected mode. */
+#define X86EMUL_MODE_PROT64   8	/* 64-bit (long) mode.    */
+
+/* Host execution mode. */
+#if defined(CONFIG_X86_32)
+#define X86EMUL_MODE_HOST X86EMUL_MODE_PROT32
+#elif defined(CONFIG_X86_64)
+#define X86EMUL_MODE_HOST X86EMUL_MODE_PROT64
+#endif
+
+int x86_decode_insn(struct x86_emulate_ctxt *ctxt,
+		    struct x86_emulate_ops *ops);
+int x86_emulate_insn(struct x86_emulate_ctxt *ctxt,
+		     struct x86_emulate_ops *ops);
+
+#endif /* _ASM_X86_KVM_X86_EMULATE_H */
diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index b17d845897b..33901be75a3 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -138,7 +138,7 @@ enum {
 	VCPU_SREG_LDTR,
 };
 
-#include <asm/kvm_x86_emulate.h>
+#include <asm/kvm_emulate.h>
 
 #define KVM_NR_MEM_OBJS 40
 
diff --git a/arch/x86/include/asm/kvm_x86_emulate.h b/arch/x86/include/asm/kvm_x86_emulate.h
deleted file mode 100644
index b7ed2c42311..00000000000
--- a/arch/x86/include/asm/kvm_x86_emulate.h
+++ /dev/null
@@ -1,187 +0,0 @@
-/******************************************************************************
- * x86_emulate.h
- *
- * Generic x86 (32-bit and 64-bit) instruction decoder and emulator.
- *
- * Copyright (c) 2005 Keir Fraser
- *
- * From: xen-unstable 10676:af9809f51f81a3c43f276f00c81a52ef558afda4
- */
-
-#ifndef _ASM_X86_KVM_X86_EMULATE_H
-#define _ASM_X86_KVM_X86_EMULATE_H
-
-struct x86_emulate_ctxt;
-
-/*
- * x86_emulate_ops:
- *
- * These operations represent the instruction emulator's interface to memory.
- * There are two categories of operation: those that act on ordinary memory
- * regions (*_std), and those that act on memory regions known to require
- * special treatment or emulation (*_emulated).
- *
- * The emulator assumes that an instruction accesses only one 'emulated memory'
- * location, that this location is the given linear faulting address (cr2), and
- * that this is one of the instruction's data operands. Instruction fetches and
- * stack operations are assumed never to access emulated memory. The emulator
- * automatically deduces which operand of a string-move operation is accessing
- * emulated memory, and assumes that the other operand accesses normal memory.
- *
- * NOTES:
- *  1. The emulator isn't very smart about emulated vs. standard memory.
- *     'Emulated memory' access addresses should be checked for sanity.
- *     'Normal memory' accesses may fault, and the caller must arrange to
- *     detect and handle reentrancy into the emulator via recursive faults.
- *     Accesses may be unaligned and may cross page boundaries.
- *  2. If the access fails (cannot emulate, or a standard access faults) then
- *     it is up to the memop to propagate the fault to the guest VM via
- *     some out-of-band mechanism, unknown to the emulator. The memop signals
- *     failure by returning X86EMUL_PROPAGATE_FAULT to the emulator, which will
- *     then immediately bail.
- *  3. Valid access sizes are 1, 2, 4 and 8 bytes. On x86/32 systems only
- *     cmpxchg8b_emulated need support 8-byte accesses.
- *  4. The emulator cannot handle 64-bit mode emulation on an x86/32 system.
- */
-/* Access completed successfully: continue emulation as normal. */
-#define X86EMUL_CONTINUE        0
-/* Access is unhandleable: bail from emulation and return error to caller. */
-#define X86EMUL_UNHANDLEABLE    1
-/* Terminate emulation but return success to the caller. */
-#define X86EMUL_PROPAGATE_FAULT 2 /* propagate a generated fault to guest */
-#define X86EMUL_RETRY_INSTR     2 /* retry the instruction for some reason */
-#define X86EMUL_CMPXCHG_FAILED  2 /* cmpxchg did not see expected value */
-struct x86_emulate_ops {
-	/*
-	 * read_std: Read bytes of standard (non-emulated/special) memory.
-	 *           Used for instruction fetch, stack operations, and others.
-	 *  @addr:  [IN ] Linear address from which to read.
-	 *  @val:   [OUT] Value read from memory, zero-extended to 'u_long'.
-	 *  @bytes: [IN ] Number of bytes to read from memory.
-	 */
-	int (*read_std)(unsigned long addr, void *val,
-			unsigned int bytes, struct kvm_vcpu *vcpu);
-
-	/*
-	 * read_emulated: Read bytes from emulated/special memory area.
-	 *  @addr:  [IN ] Linear address from which to read.
-	 *  @val:   [OUT] Value read from memory, zero-extended to 'u_long'.
-	 *  @bytes: [IN ] Number of bytes to read from memory.
-	 */
-	int (*read_emulated)(unsigned long addr,
-			     void *val,
-			     unsigned int bytes,
-			     struct kvm_vcpu *vcpu);
-
-	/*
-	 * write_emulated: Read bytes from emulated/special memory area.
-	 *  @addr:  [IN ] Linear address to which to write.
-	 *  @val:   [IN ] Value to write to memory (low-order bytes used as
-	 *                required).
-	 *  @bytes: [IN ] Number of bytes to write to memory.
-	 */
-	int (*write_emulated)(unsigned long addr,
-			      const void *val,
-			      unsigned int bytes,
-			      struct kvm_vcpu *vcpu);
-
-	/*
-	 * cmpxchg_emulated: Emulate an atomic (LOCKed) CMPXCHG operation on an
-	 *                   emulated/special memory area.
-	 *  @addr:  [IN ] Linear address to access.
-	 *  @old:   [IN ] Value expected to be current at @addr.
-	 *  @new:   [IN ] Value to write to @addr.
-	 *  @bytes: [IN ] Number of bytes to access using CMPXCHG.
-	 */
-	int (*cmpxchg_emulated)(unsigned long addr,
-				const void *old,
-				const void *new,
-				unsigned int bytes,
-				struct kvm_vcpu *vcpu);
-
-};
-
-/* Type, address-of, and value of an instruction's operand. */
-struct operand {
-	enum { OP_REG, OP_MEM, OP_IMM, OP_NONE } type;
-	unsigned int bytes;
-	unsigned long val, orig_val, *ptr;
-};
-
-struct fetch_cache {
-	u8 data[15];
-	unsigned long start;
-	unsigned long end;
-};
-
-struct decode_cache {
-	u8 twobyte;
-	u8 b;
-	u8 lock_prefix;
-	u8 rep_prefix;
-	u8 op_bytes;
-	u8 ad_bytes;
-	u8 rex_prefix;
-	struct operand src;
-	struct operand src2;
-	struct operand dst;
-	bool has_seg_override;
-	u8 seg_override;
-	unsigned int d;
-	unsigned long regs[NR_VCPU_REGS];
-	unsigned long eip;
-	/* modrm */
-	u8 modrm;
-	u8 modrm_mod;
-	u8 modrm_reg;
-	u8 modrm_rm;
-	u8 use_modrm_ea;
-	bool rip_relative;
-	unsigned long modrm_ea;
-	void *modrm_ptr;
-	unsigned long modrm_val;
-	struct fetch_cache fetch;
-};
-
-#define X86_SHADOW_INT_MOV_SS  1
-#define X86_SHADOW_INT_STI     2
-
-struct x86_emulate_ctxt {
-	/* Register state before/after emulation. */
-	struct kvm_vcpu *vcpu;
-
-	unsigned long eflags;
-	/* Emulated execution mode, represented by an X86EMUL_MODE value. */
-	int mode;
-	u32 cs_base;
-
-	/* interruptibility state, as a result of execution of STI or MOV SS */
-	int interruptibility;
-
-	/* decode cache */
-	struct decode_cache decode;
-};
-
-/* Repeat String Operation Prefix */
-#define REPE_PREFIX	1
-#define REPNE_PREFIX	2
-
-/* Execution mode, passed to the emulator. */
-#define X86EMUL_MODE_REAL     0	/* Real mode.             */
-#define X86EMUL_MODE_PROT16   2	/* 16-bit protected mode. */
-#define X86EMUL_MODE_PROT32   4	/* 32-bit protected mode. */
-#define X86EMUL_MODE_PROT64   8	/* 64-bit (long) mode.    */
-
-/* Host execution mode. */
-#if defined(CONFIG_X86_32)
-#define X86EMUL_MODE_HOST X86EMUL_MODE_PROT32
-#elif defined(CONFIG_X86_64)
-#define X86EMUL_MODE_HOST X86EMUL_MODE_PROT64
-#endif
-
-int x86_decode_insn(struct x86_emulate_ctxt *ctxt,
-		    struct x86_emulate_ops *ops);
-int x86_emulate_insn(struct x86_emulate_ctxt *ctxt,
-		     struct x86_emulate_ops *ops);
-
-#endif /* _ASM_X86_KVM_X86_EMULATE_H */
diff --git a/arch/x86/kvm/Makefile b/arch/x86/kvm/Makefile
index afaaa7627d9..0e7fe78d0f7 100644
--- a/arch/x86/kvm/Makefile
+++ b/arch/x86/kvm/Makefile
@@ -9,7 +9,7 @@ kvm-y			+= $(addprefix ../../../virt/kvm/, kvm_main.o ioapic.o \
 				coalesced_mmio.o irq_comm.o eventfd.o)
 kvm-$(CONFIG_IOMMU_API)	+= $(addprefix ../../../virt/kvm/, iommu.o)
 
-kvm-y			+= x86.o mmu.o x86_emulate.o i8259.o irq.o lapic.o \
+kvm-y			+= x86.o mmu.o emulate.o i8259.o irq.o lapic.o \
 			   i8254.o timer.o
 kvm-intel-y		+= vmx.o
 kvm-amd-y		+= svm.o
diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c
new file mode 100644
index 00000000000..2eb807a7b62
--- /dev/null
+++ b/arch/x86/kvm/emulate.c
@@ -0,0 +1,2392 @@
+/******************************************************************************
+ * emulate.c
+ *
+ * Generic x86 (32-bit and 64-bit) instruction decoder and emulator.
+ *
+ * Copyright (c) 2005 Keir Fraser
+ *
+ * Linux coding style, mod r/m decoder, segment base fixes, real-mode
+ * privileged instructions:
+ *
+ * Copyright (C) 2006 Qumranet
+ *
+ *   Avi Kivity <avi@qumranet.com>
+ *   Yaniv Kamay <yaniv@qumranet.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2.  See
+ * the COPYING file in the top-level directory.
+ *
+ * From: xen-unstable 10676:af9809f51f81a3c43f276f00c81a52ef558afda4
+ */
+
+#ifndef __KERNEL__
+#include <stdio.h>
+#include <stdint.h>
+#include <public/xen.h>
+#define DPRINTF(_f, _a ...) printf(_f , ## _a)
+#else
+#include <linux/kvm_host.h>
+#include "kvm_cache_regs.h"
+#define DPRINTF(x...) do {} while (0)
+#endif
+#include <linux/module.h>
+#include <asm/kvm_emulate.h>
+
+#include "mmu.h"		/* for is_long_mode() */
+
+/*
+ * Opcode effective-address decode tables.
+ * Note that we only emulate instructions that have at least one memory
+ * operand (excluding implicit stack references). We assume that stack
+ * references and instruction fetches will never occur in special memory
+ * areas that require emulation. So, for example, 'mov <imm>,<reg>' need
+ * not be handled.
+ */
+
+/* Operand sizes: 8-bit operands or specified/overridden size. */
+#define ByteOp      (1<<0)	/* 8-bit operands. */
+/* Destination operand type. */
+#define ImplicitOps (1<<1)	/* Implicit in opcode. No generic decode. */
+#define DstReg      (2<<1)	/* Register operand. */
+#define DstMem      (3<<1)	/* Memory operand. */
+#define DstAcc      (4<<1)      /* Destination Accumulator */
+#define DstMask     (7<<1)
+/* Source operand type. */
+#define SrcNone     (0<<4)	/* No source operand. */
+#define SrcImplicit (0<<4)	/* Source operand is implicit in the opcode. */
+#define SrcReg      (1<<4)	/* Register operand. */
+#define SrcMem      (2<<4)	/* Memory operand. */
+#define SrcMem16    (3<<4)	/* Memory operand (16-bit). */
+#define SrcMem32    (4<<4)	/* Memory operand (32-bit). */
+#define SrcImm      (5<<4)	/* Immediate operand. */
+#define SrcImmByte  (6<<4)	/* 8-bit sign-extended immediate operand. */
+#define SrcOne      (7<<4)	/* Implied '1' */
+#define SrcImmUByte (8<<4)      /* 8-bit unsigned immediate operand. */
+#define SrcImmU     (9<<4)      /* Immediate operand, unsigned */
+#define SrcMask     (0xf<<4)
+/* Generic ModRM decode. */
+#define ModRM       (1<<8)
+/* Destination is only written; never read. */
+#define Mov         (1<<9)
+#define BitOp       (1<<10)
+#define MemAbs      (1<<11)      /* Memory operand is absolute displacement */
+#define String      (1<<12)     /* String instruction (rep capable) */
+#define Stack       (1<<13)     /* Stack instruction (push/pop) */
+#define Group       (1<<14)     /* Bits 3:5 of modrm byte extend opcode */
+#define GroupDual   (1<<15)     /* Alternate decoding of mod == 3 */
+#define GroupMask   0xff        /* Group number stored in bits 0:7 */
+/* Source 2 operand type */
+#define Src2None    (0<<29)
+#define Src2CL      (1<<29)
+#define Src2ImmByte (2<<29)
+#define Src2One     (3<<29)
+#define Src2Imm16   (4<<29)
+#define Src2Mask    (7<<29)
+
+enum {
+	Group1_80, Group1_81, Group1_82, Group1_83,
+	Group1A, Group3_Byte, Group3, Group4, Group5, Group7,
+};
+
+static u32 opcode_table[256] = {
+	/* 0x00 - 0x07 */
+	ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
+	ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
+	ByteOp | DstAcc | SrcImm, DstAcc | SrcImm, 0, 0,
+	/* 0x08 - 0x0F */
+	ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
+	ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
+	0, 0, 0, 0,
+	/* 0x10 - 0x17 */
+	ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
+	ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
+	0, 0, 0, 0,
+	/* 0x18 - 0x1F */
+	ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
+	ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
+	0, 0, 0, 0,
+	/* 0x20 - 0x27 */
+	ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
+	ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
+	DstAcc | SrcImmByte, DstAcc | SrcImm, 0, 0,
+	/* 0x28 - 0x2F */
+	ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
+	ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
+	0, 0, 0, 0,
+	/* 0x30 - 0x37 */
+	ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
+	ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
+	0, 0, 0, 0,
+	/* 0x38 - 0x3F */
+	ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
+	ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
+	ByteOp | DstAcc | SrcImm, DstAcc | SrcImm,
+	0, 0,
+	/* 0x40 - 0x47 */
+	DstReg, DstReg, DstReg, DstReg, DstReg, DstReg, DstReg, DstReg,
+	/* 0x48 - 0x4F */
+	DstReg, DstReg, DstReg, DstReg,	DstReg, DstReg, DstReg, DstReg,
+	/* 0x50 - 0x57 */
+	SrcReg | Stack, SrcReg | Stack, SrcReg | Stack, SrcReg | Stack,
+	SrcReg | Stack, SrcReg | Stack, SrcReg | Stack, SrcReg | Stack,
+	/* 0x58 - 0x5F */
+	DstReg | Stack, DstReg | Stack, DstReg | Stack, DstReg | Stack,
+	DstReg | Stack, DstReg | Stack, DstReg | Stack, DstReg | Stack,
+	/* 0x60 - 0x67 */
+	0, 0, 0, DstReg | SrcMem32 | ModRM | Mov /* movsxd (x86/64) */ ,
+	0, 0, 0, 0,
+	/* 0x68 - 0x6F */
+	SrcImm | Mov | Stack, 0, SrcImmByte | Mov | Stack, 0,
+	SrcNone  | ByteOp  | ImplicitOps, SrcNone  | ImplicitOps, /* insb, insw/insd */
+	SrcNone  | ByteOp  | ImplicitOps, SrcNone  | ImplicitOps, /* outsb, outsw/outsd */
+	/* 0x70 - 0x77 */
+	SrcImmByte, SrcImmByte, SrcImmByte, SrcImmByte,
+	SrcImmByte, SrcImmByte, SrcImmByte, SrcImmByte,
+	/* 0x78 - 0x7F */
+	SrcImmByte, SrcImmByte, SrcImmByte, SrcImmByte,
+	SrcImmByte, SrcImmByte, SrcImmByte, SrcImmByte,
+	/* 0x80 - 0x87 */
+	Group | Group1_80, Group | Group1_81,
+	Group | Group1_82, Group | Group1_83,
+	ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
+	ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
+	/* 0x88 - 0x8F */
+	ByteOp | DstMem | SrcReg | ModRM | Mov, DstMem | SrcReg | ModRM | Mov,
+	ByteOp | DstReg | SrcMem | ModRM | Mov, DstReg | SrcMem | ModRM | Mov,
+	DstMem | SrcReg | ModRM | Mov, ModRM | DstReg,
+	DstReg | SrcMem | ModRM | Mov, Group | Group1A,
+	/* 0x90 - 0x97 */
+	DstReg, DstReg, DstReg, DstReg,	DstReg, DstReg, DstReg, DstReg,
+	/* 0x98 - 0x9F */
+	0, 0, SrcImm | Src2Imm16, 0,
+	ImplicitOps | Stack, ImplicitOps | Stack, 0, 0,
+	/* 0xA0 - 0xA7 */
+	ByteOp | DstReg | SrcMem | Mov | MemAbs, DstReg | SrcMem | Mov | MemAbs,
+	ByteOp | DstMem | SrcReg | Mov | MemAbs, DstMem | SrcReg | Mov | MemAbs,
+	ByteOp | ImplicitOps | Mov | String, ImplicitOps | Mov | String,
+	ByteOp | ImplicitOps | String, ImplicitOps | String,
+	/* 0xA8 - 0xAF */
+	0, 0, ByteOp | ImplicitOps | Mov | String, ImplicitOps | Mov | String,
+	ByteOp | ImplicitOps | Mov | String, ImplicitOps | Mov | String,
+	ByteOp | ImplicitOps | String, ImplicitOps | String,
+	/* 0xB0 - 0xB7 */
+	ByteOp | DstReg | SrcImm | Mov, ByteOp | DstReg | SrcImm | Mov,
+	ByteOp | DstReg | SrcImm | Mov, ByteOp | DstReg | SrcImm | Mov,
+	ByteOp | DstReg | SrcImm | Mov, ByteOp | DstReg | SrcImm | Mov,
+	ByteOp | DstReg | SrcImm | Mov, ByteOp | DstReg | SrcImm | Mov,
+	/* 0xB8 - 0xBF */
+	DstReg | SrcImm | Mov, DstReg | SrcImm | Mov,
+	DstReg | SrcImm | Mov, DstReg | SrcImm | Mov,
+	DstReg | SrcImm | Mov, DstReg | SrcImm | Mov,
+	DstReg | SrcImm | Mov, DstReg | SrcImm | Mov,
+	/* 0xC0 - 0xC7 */
+	ByteOp | DstMem | SrcImm | ModRM, DstMem | SrcImmByte | ModRM,
+	0, ImplicitOps | Stack, 0, 0,
+	ByteOp | DstMem | SrcImm | ModRM | Mov, DstMem | SrcImm | ModRM | Mov,
+	/* 0xC8 - 0xCF */
+	0, 0, 0, ImplicitOps | Stack,
+	ImplicitOps, SrcImmByte, ImplicitOps, ImplicitOps,
+	/* 0xD0 - 0xD7 */
+	ByteOp | DstMem | SrcImplicit | ModRM, DstMem | SrcImplicit | ModRM,
+	ByteOp | DstMem | SrcImplicit | ModRM, DstMem | SrcImplicit | ModRM,
+	0, 0, 0, 0,
+	/* 0xD8 - 0xDF */
+	0, 0, 0, 0, 0, 0, 0, 0,
+	/* 0xE0 - 0xE7 */
+	0, 0, 0, 0,
+	ByteOp | SrcImmUByte, SrcImmUByte,
+	ByteOp | SrcImmUByte, SrcImmUByte,
+	/* 0xE8 - 0xEF */
+	SrcImm | Stack, SrcImm | ImplicitOps,
+	SrcImmU | Src2Imm16, SrcImmByte | ImplicitOps,
+	SrcNone | ByteOp | ImplicitOps, SrcNone | ImplicitOps,
+	SrcNone | ByteOp | ImplicitOps, SrcNone | ImplicitOps,
+	/* 0xF0 - 0xF7 */
+	0, 0, 0, 0,
+	ImplicitOps, ImplicitOps, Group | Group3_Byte, Group | Group3,
+	/* 0xF8 - 0xFF */
+	ImplicitOps, 0, ImplicitOps, ImplicitOps,
+	ImplicitOps, ImplicitOps, Group | Group4, Group | Group5,
+};
+
+static u32 twobyte_table[256] = {
+	/* 0x00 - 0x0F */
+	0, Group | GroupDual | Group7, 0, 0, 0, ImplicitOps, ImplicitOps, 0,
+	ImplicitOps, ImplicitOps, 0, 0, 0, ImplicitOps | ModRM, 0, 0,
+	/* 0x10 - 0x1F */
+	0, 0, 0, 0, 0, 0, 0, 0, ImplicitOps | ModRM, 0, 0, 0, 0, 0, 0, 0,
+	/* 0x20 - 0x2F */
+	ModRM | ImplicitOps, ModRM, ModRM | ImplicitOps, ModRM, 0, 0, 0, 0,
+	0, 0, 0, 0, 0, 0, 0, 0,
+	/* 0x30 - 0x3F */
+	ImplicitOps, 0, ImplicitOps, 0,
+	ImplicitOps, ImplicitOps, 0, 0,
+	0, 0, 0, 0, 0, 0, 0, 0,
+	/* 0x40 - 0x47 */
+	DstReg | SrcMem | ModRM | Mov, DstReg | SrcMem | ModRM | Mov,
+	DstReg | SrcMem | ModRM | Mov, DstReg | SrcMem | ModRM | Mov,
+	DstReg | SrcMem | ModRM | Mov, DstReg | SrcMem | ModRM | Mov,
+	DstReg | SrcMem | ModRM | Mov, DstReg | SrcMem | ModRM | Mov,
+	/* 0x48 - 0x4F */
+	DstReg | SrcMem | ModRM | Mov, DstReg | SrcMem | ModRM | Mov,
+	DstReg | SrcMem | ModRM | Mov, DstReg | SrcMem | ModRM | Mov,
+	DstReg | SrcMem | ModRM | Mov, DstReg | SrcMem | ModRM | Mov,
+	DstReg | SrcMem | ModRM | Mov, DstReg | SrcMem | ModRM | Mov,
+	/* 0x50 - 0x5F */
+	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+	/* 0x60 - 0x6F */
+	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+	/* 0x70 - 0x7F */
+	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+	/* 0x80 - 0x8F */
+	SrcImm, SrcImm, SrcImm, SrcImm, SrcImm, SrcImm, SrcImm, SrcImm,
+	SrcImm, SrcImm, SrcImm, SrcImm, SrcImm, SrcImm, SrcImm, SrcImm,
+	/* 0x90 - 0x9F */
+	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+	/* 0xA0 - 0xA7 */
+	0, 0, 0, DstMem | SrcReg | ModRM | BitOp,
+	DstMem | SrcReg | Src2ImmByte | ModRM,
+	DstMem | SrcReg | Src2CL | ModRM, 0, 0,
+	/* 0xA8 - 0xAF */
+	0, 0, 0, DstMem | SrcReg | ModRM | BitOp,
+	DstMem | SrcReg | Src2ImmByte | ModRM,
+	DstMem | SrcReg | Src2CL | ModRM,
+	ModRM, 0,
+	/* 0xB0 - 0xB7 */
+	ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM, 0,
+	    DstMem | SrcReg | ModRM | BitOp,
+	0, 0, ByteOp | DstReg | SrcMem | ModRM | Mov,
+	    DstReg | SrcMem16 | ModRM | Mov,
+	/* 0xB8 - 0xBF */
+	0, 0, DstMem | SrcImmByte | ModRM, DstMem | SrcReg | ModRM | BitOp,
+	0, 0, ByteOp | DstReg | SrcMem | ModRM | Mov,
+	    DstReg | SrcMem16 | ModRM | Mov,
+	/* 0xC0 - 0xCF */
+	0, 0, 0, DstMem | SrcReg | ModRM | Mov, 0, 0, 0, ImplicitOps | ModRM,
+	0, 0, 0, 0, 0, 0, 0, 0,
+	/* 0xD0 - 0xDF */
+	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+	/* 0xE0 - 0xEF */
+	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+	/* 0xF0 - 0xFF */
+	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
+};
+
+static u32 group_table[] = {
+	[Group1_80*8] =
+	ByteOp | DstMem | SrcImm | ModRM, ByteOp | DstMem | SrcImm | ModRM,
+	ByteOp | DstMem | SrcImm | ModRM, ByteOp | DstMem | SrcImm | ModRM,
+	ByteOp | DstMem | SrcImm | ModRM, ByteOp | DstMem | SrcImm | ModRM,
+	ByteOp | DstMem | SrcImm | ModRM, ByteOp | DstMem | SrcImm | ModRM,
+	[Group1_81*8] =
+	DstMem | SrcImm | ModRM, DstMem | SrcImm | ModRM,
+	DstMem | SrcImm | ModRM, DstMem | SrcImm | ModRM,
+	DstMem | SrcImm | ModRM, DstMem | SrcImm | ModRM,
+	DstMem | SrcImm | ModRM, DstMem | SrcImm | ModRM,
+	[Group1_82*8] =
+	ByteOp | DstMem | SrcImm | ModRM, ByteOp | DstMem | SrcImm | ModRM,
+	ByteOp | DstMem | SrcImm | ModRM, ByteOp | DstMem | SrcImm | ModRM,
+	ByteOp | DstMem | SrcImm | ModRM, ByteOp | DstMem | SrcImm | ModRM,
+	ByteOp | DstMem | SrcImm | ModRM, ByteOp | DstMem | SrcImm | ModRM,
+	[Group1_83*8] =
+	DstMem | SrcImmByte | ModRM, DstMem | SrcImmByte | ModRM,
+	DstMem | SrcImmByte | ModRM, DstMem | SrcImmByte | ModRM,
+	DstMem | SrcImmByte | ModRM, DstMem | SrcImmByte | ModRM,
+	DstMem | SrcImmByte | ModRM, DstMem | SrcImmByte | ModRM,
+	[Group1A*8] =
+	DstMem | SrcNone | ModRM | Mov | Stack, 0, 0, 0, 0, 0, 0, 0,
+	[Group3_Byte*8] =
+	ByteOp | SrcImm | DstMem | ModRM, 0,
+	ByteOp | DstMem | SrcNone | ModRM, ByteOp | DstMem | SrcNone | ModRM,
+	0, 0, 0, 0,
+	[Group3*8] =
+	DstMem | SrcImm | ModRM, 0,
+	DstMem | SrcNone | ModRM, DstMem | SrcNone | ModRM,
+	0, 0, 0, 0,
+	[Group4*8] =
+	ByteOp | DstMem | SrcNone | ModRM, ByteOp | DstMem | SrcNone | ModRM,
+	0, 0, 0, 0, 0, 0,
+	[Group5*8] =
+	DstMem | SrcNone | ModRM, DstMem | SrcNone | ModRM,
+	SrcMem | ModRM | Stack, 0,
+	SrcMem | ModRM | Stack, 0, SrcMem | ModRM | Stack, 0,
+	[Group7*8] =
+	0, 0, ModRM | SrcMem, ModRM | SrcMem,
+	SrcNone | ModRM | DstMem | Mov, 0,
+	SrcMem16 | ModRM | Mov, SrcMem | ModRM | ByteOp,
+};
+
+static u32 group2_table[] = {
+	[Group7*8] =
+	SrcNone | ModRM, 0, 0, SrcNone | ModRM,
+	SrcNone | ModRM | DstMem | Mov, 0,
+	SrcMem16 | ModRM | Mov, 0,
+};
+
+/* EFLAGS bit definitions. */
+#define EFLG_VM (1<<17)
+#define EFLG_RF (1<<16)
+#define EFLG_OF (1<<11)
+#define EFLG_DF (1<<10)
+#define EFLG_IF (1<<9)
+#define EFLG_SF (1<<7)
+#define EFLG_ZF (1<<6)
+#define EFLG_AF (1<<4)
+#define EFLG_PF (1<<2)
+#define EFLG_CF (1<<0)
+
+/*
+ * Instruction emulation:
+ * Most instructions are emulated directly via a fragment of inline assembly
+ * code. This allows us to save/restore EFLAGS and thus very easily pick up
+ * any modified flags.
+ */
+
+#if defined(CONFIG_X86_64)
+#define _LO32 "k"		/* force 32-bit operand */
+#define _STK  "%%rsp"		/* stack pointer */
+#elif defined(__i386__)
+#define _LO32 ""		/* force 32-bit operand */
+#define _STK  "%%esp"		/* stack pointer */
+#endif
+
+/*
+ * These EFLAGS bits are restored from saved value during emulation, and
+ * any changes are written back to the saved value after emulation.
+ */
+#define EFLAGS_MASK (EFLG_OF|EFLG_SF|EFLG_ZF|EFLG_AF|EFLG_PF|EFLG_CF)
+
+/* Before executing instruction: restore necessary bits in EFLAGS. */
+#define _PRE_EFLAGS(_sav, _msk, _tmp)					\
+	/* EFLAGS = (_sav & _msk) | (EFLAGS & ~_msk); _sav &= ~_msk; */ \
+	"movl %"_sav",%"_LO32 _tmp"; "                                  \
+	"push %"_tmp"; "                                                \
+	"push %"_tmp"; "                                                \
+	"movl %"_msk",%"_LO32 _tmp"; "                                  \
+	"andl %"_LO32 _tmp",("_STK"); "                                 \
+	"pushf; "                                                       \
+	"notl %"_LO32 _tmp"; "                                          \
+	"andl %"_LO32 _tmp",("_STK"); "                                 \
+	"andl %"_LO32 _tmp","__stringify(BITS_PER_LONG/4)"("_STK"); "	\
+	"pop  %"_tmp"; "                                                \
+	"orl  %"_LO32 _tmp",("_STK"); "                                 \
+	"popf; "                                                        \
+	"pop  %"_sav"; "
+
+/* After executing instruction: write-back necessary bits in EFLAGS. */
+#define _POST_EFLAGS(_sav, _msk, _tmp) \
+	/* _sav |= EFLAGS & _msk; */		\
+	"pushf; "				\
+	"pop  %"_tmp"; "			\
+	"andl %"_msk",%"_LO32 _tmp"; "		\
+	"orl  %"_LO32 _tmp",%"_sav"; "
+
+#ifdef CONFIG_X86_64
+#define ON64(x) x
+#else
+#define ON64(x)
+#endif
+
+#define ____emulate_2op(_op, _src, _dst, _eflags, _x, _y, _suffix)	\
+	do {								\
+		__asm__ __volatile__ (					\
+			_PRE_EFLAGS("0", "4", "2")			\
+			_op _suffix " %"_x"3,%1; "			\
+			_POST_EFLAGS("0", "4", "2")			\
+			: "=m" (_eflags), "=m" ((_dst).val),		\
+			  "=&r" (_tmp)					\
+			: _y ((_src).val), "i" (EFLAGS_MASK));		\
+	} while (0)
+
+
+/* Raw emulation: instruction has two explicit operands. */
+#define __emulate_2op_nobyte(_op,_src,_dst,_eflags,_wx,_wy,_lx,_ly,_qx,_qy) \
+	do {								\
+		unsigned long _tmp;					\
+									\
+		switch ((_dst).bytes) {					\
+		case 2:							\
+			____emulate_2op(_op,_src,_dst,_eflags,_wx,_wy,"w"); \
+			break;						\
+		case 4:							\
+			____emulate_2op(_op,_src,_dst,_eflags,_lx,_ly,"l"); \
+			break;						\
+		case 8:							\
+			ON64(____emulate_2op(_op,_src,_dst,_eflags,_qx,_qy,"q")); \
+			break;						\
+		}							\
+	} while (0)
+
+#define __emulate_2op(_op,_src,_dst,_eflags,_bx,_by,_wx,_wy,_lx,_ly,_qx,_qy) \
+	do {								     \
+		unsigned long _tmp;					     \
+		switch ((_dst).bytes) {				             \
+		case 1:							     \
+			____emulate_2op(_op,_src,_dst,_eflags,_bx,_by,"b");  \
+			break;						     \
+		default:						     \
+			__emulate_2op_nobyte(_op, _src, _dst, _eflags,	     \
+					     _wx, _wy, _lx, _ly, _qx, _qy);  \
+			break;						     \
+		}							     \
+	} while (0)
+
+/* Source operand is byte-sized and may be restricted to just %cl. */
+#define emulate_2op_SrcB(_op, _src, _dst, _eflags)                      \
+	__emulate_2op(_op, _src, _dst, _eflags,				\
+		      "b", "c", "b", "c", "b", "c", "b", "c")
+
+/* Source operand is byte, word, long or quad sized. */
+#define emulate_2op_SrcV(_op, _src, _dst, _eflags)                      \
+	__emulate_2op(_op, _src, _dst, _eflags,				\
+		      "b", "q", "w", "r", _LO32, "r", "", "r")
+
+/* Source operand is word, long or quad sized. */
+#define emulate_2op_SrcV_nobyte(_op, _src, _dst, _eflags)               \
+	__emulate_2op_nobyte(_op, _src, _dst, _eflags,			\
+			     "w", "r", _LO32, "r", "", "r")
+
+/* Instruction has three operands and one operand is stored in ECX register */
+#define __emulate_2op_cl(_op, _cl, _src, _dst, _eflags, _suffix, _type) 	\
+	do {									\
+		unsigned long _tmp;						\
+		_type _clv  = (_cl).val;  					\
+		_type _srcv = (_src).val;    					\
+		_type _dstv = (_dst).val;					\
+										\
+		__asm__ __volatile__ (						\
+			_PRE_EFLAGS("0", "5", "2")				\
+			_op _suffix " %4,%1 \n"					\
+			_POST_EFLAGS("0", "5", "2")				\
+			: "=m" (_eflags), "+r" (_dstv), "=&r" (_tmp)		\
+			: "c" (_clv) , "r" (_srcv), "i" (EFLAGS_MASK)		\
+			); 							\
+										\
+		(_cl).val  = (unsigned long) _clv;				\
+		(_src).val = (unsigned long) _srcv;				\
+		(_dst).val = (unsigned long) _dstv;				\
+	} while (0)
+
+#define emulate_2op_cl(_op, _cl, _src, _dst, _eflags)				\
+	do {									\
+		switch ((_dst).bytes) {						\
+		case 2:								\
+			__emulate_2op_cl(_op, _cl, _src, _dst, _eflags,  	\
+						"w", unsigned short);         	\
+			break;							\
+		case 4: 							\
+			__emulate_2op_cl(_op, _cl, _src, _dst, _eflags,  	\
+						"l", unsigned int);           	\
+			break;							\
+		case 8:								\
+			ON64(__emulate_2op_cl(_op, _cl, _src, _dst, _eflags,	\
+						"q", unsigned long));  		\
+			break;							\
+		}								\
+	} while (0)
+
+#define __emulate_1op(_op, _dst, _eflags, _suffix)			\
+	do {								\
+		unsigned long _tmp;					\
+									\
+		__asm__ __volatile__ (					\
+			_PRE_EFLAGS("0", "3", "2")			\
+			_op _suffix " %1; "				\
+			_POST_EFLAGS("0", "3", "2")			\
+			: "=m" (_eflags), "+m" ((_dst).val),		\
+			  "=&r" (_tmp)					\
+			: "i" (EFLAGS_MASK));				\
+	} while (0)
+
+/* Instruction has only one explicit operand (no source operand). */
+#define emulate_1op(_op, _dst, _eflags)                                    \
+	do {								\
+		switch ((_dst).bytes) {				        \
+		case 1:	__emulate_1op(_op, _dst, _eflags, "b"); break;	\
+		case 2:	__emulate_1op(_op, _dst, _eflags, "w"); break;	\
+		case 4:	__emulate_1op(_op, _dst, _eflags, "l"); break;	\
+		case 8:	ON64(__emulate_1op(_op, _dst, _eflags, "q")); break; \
+		}							\
+	} while (0)
+
+/* Fetch next part of the instruction being emulated. */
+#define insn_fetch(_type, _size, _eip)                                  \
+({	unsigned long _x;						\
+	rc = do_insn_fetch(ctxt, ops, (_eip), &_x, (_size));		\
+	if (rc != 0)							\
+		goto done;						\
+	(_eip) += (_size);						\
+	(_type)_x;							\
+})
+
+static inline unsigned long ad_mask(struct decode_cache *c)
+{
+	return (1UL << (c->ad_bytes << 3)) - 1;
+}
+
+/* Access/update address held in a register, based on addressing mode. */
+static inline unsigned long
+address_mask(struct decode_cache *c, unsigned long reg)
+{
+	if (c->ad_bytes == sizeof(unsigned long))
+		return reg;
+	else
+		return reg & ad_mask(c);
+}
+
+static inline unsigned long
+register_address(struct decode_cache *c, unsigned long base, unsigned long reg)
+{
+	return base + address_mask(c, reg);
+}
+
+static inline void
+register_address_increment(struct decode_cache *c, unsigned long *reg, int inc)
+{
+	if (c->ad_bytes == sizeof(unsigned long))
+		*reg += inc;
+	else
+		*reg = (*reg & ~ad_mask(c)) | ((*reg + inc) & ad_mask(c));
+}
+
+static inline void jmp_rel(struct decode_cache *c, int rel)
+{
+	register_address_increment(c, &c->eip, rel);
+}
+
+static void set_seg_override(struct decode_cache *c, int seg)
+{
+	c->has_seg_override = true;
+	c->seg_override = seg;
+}
+
+static unsigned long seg_base(struct x86_emulate_ctxt *ctxt, int seg)
+{
+	if (ctxt->mode == X86EMUL_MODE_PROT64 && seg < VCPU_SREG_FS)
+		return 0;
+
+	return kvm_x86_ops->get_segment_base(ctxt->vcpu, seg);
+}
+
+static unsigned long seg_override_base(struct x86_emulate_ctxt *ctxt,
+				       struct decode_cache *c)
+{
+	if (!c->has_seg_override)
+		return 0;
+
+	return seg_base(ctxt, c->seg_override);
+}
+
+static unsigned long es_base(struct x86_emulate_ctxt *ctxt)
+{
+	return seg_base(ctxt, VCPU_SREG_ES);
+}
+
+static unsigned long ss_base(struct x86_emulate_ctxt *ctxt)
+{
+	return seg_base(ctxt, VCPU_SREG_SS);
+}
+
+static int do_fetch_insn_byte(struct x86_emulate_ctxt *ctxt,
+			      struct x86_emulate_ops *ops,
+			      unsigned long linear, u8 *dest)
+{
+	struct fetch_cache *fc = &ctxt->decode.fetch;
+	int rc;
+	int size;
+
+	if (linear < fc->start || linear >= fc->end) {
+		size = min(15UL, PAGE_SIZE - offset_in_page(linear));
+		rc = ops->read_std(linear, fc->data, size, ctxt->vcpu);
+		if (rc)
+			return rc;
+		fc->start = linear;
+		fc->end = linear + size;
+	}
+	*dest = fc->data[linear - fc->start];
+	return 0;
+}
+
+static int do_insn_fetch(struct x86_emulate_ctxt *ctxt,
+			 struct x86_emulate_ops *ops,
+			 unsigned long eip, void *dest, unsigned size)
+{
+	int rc = 0;
+
+	eip += ctxt->cs_base;
+	while (size--) {
+		rc = do_fetch_insn_byte(ctxt, ops, eip++, dest++);
+		if (rc)
+			return rc;
+	}
+	return 0;
+}
+
+/*
+ * Given the 'reg' portion of a ModRM byte, and a register block, return a
+ * pointer into the block that addresses the relevant register.
+ * @highbyte_regs specifies whether to decode AH,CH,DH,BH.
+ */
+static void *decode_register(u8 modrm_reg, unsigned long *regs,
+			     int highbyte_regs)
+{
+	void *p;
+
+	p = &regs[modrm_reg];
+	if (highbyte_regs && modrm_reg >= 4 && modrm_reg < 8)
+		p = (unsigned char *)&regs[modrm_reg & 3] + 1;
+	return p;
+}
+
+static int read_descriptor(struct x86_emulate_ctxt *ctxt,
+			   struct x86_emulate_ops *ops,
+			   void *ptr,
+			   u16 *size, unsigned long *address, int op_bytes)
+{
+	int rc;
+
+	if (op_bytes == 2)
+		op_bytes = 3;
+	*address = 0;
+	rc = ops->read_std((unsigned long)ptr, (unsigned long *)size, 2,
+			   ctxt->vcpu);
+	if (rc)
+		return rc;
+	rc = ops->read_std((unsigned long)ptr + 2, address, op_bytes,
+			   ctxt->vcpu);
+	return rc;
+}
+
+static int test_cc(unsigned int condition, unsigned int flags)
+{
+	int rc = 0;
+
+	switch ((condition & 15) >> 1) {
+	case 0: /* o */
+		rc |= (flags & EFLG_OF);
+		break;
+	case 1: /* b/c/nae */
+		rc |= (flags & EFLG_CF);
+		break;
+	case 2: /* z/e */
+		rc |= (flags & EFLG_ZF);
+		break;
+	case 3: /* be/na */
+		rc |= (flags & (EFLG_CF|EFLG_ZF));
+		break;
+	case 4: /* s */
+		rc |= (flags & EFLG_SF);
+		break;
+	case 5: /* p/pe */
+		rc |= (flags & EFLG_PF);
+		break;
+	case 7: /* le/ng */
+		rc |= (flags & EFLG_ZF);
+		/* fall through */
+	case 6: /* l/nge */
+		rc |= (!(flags & EFLG_SF) != !(flags & EFLG_OF));
+		break;
+	}
+
+	/* Odd condition identifiers (lsb == 1) have inverted sense. */
+	return (!!rc ^ (condition & 1));
+}
+
+static void decode_register_operand(struct operand *op,
+				    struct decode_cache *c,
+				    int inhibit_bytereg)
+{
+	unsigned reg = c->modrm_reg;
+	int highbyte_regs = c->rex_prefix == 0;
+
+	if (!(c->d & ModRM))
+		reg = (c->b & 7) | ((c->rex_prefix & 1) << 3);
+	op->type = OP_REG;
+	if ((c->d & ByteOp) && !inhibit_bytereg) {
+		op->ptr = decode_register(reg, c->regs, highbyte_regs);
+		op->val = *(u8 *)op->ptr;
+		op->bytes = 1;
+	} else {
+		op->ptr = decode_register(reg, c->regs, 0);
+		op->bytes = c->op_bytes;
+		switch (op->bytes) {
+		case 2:
+			op->val = *(u16 *)op->ptr;
+			break;
+		case 4:
+			op->val = *(u32 *)op->ptr;
+			break;
+		case 8:
+			op->val = *(u64 *) op->ptr;
+			break;
+		}
+	}
+	op->orig_val = op->val;
+}
+
+static int decode_modrm(struct x86_emulate_ctxt *ctxt,
+			struct x86_emulate_ops *ops)
+{
+	struct decode_cache *c = &ctxt->decode;
+	u8 sib;
+	int index_reg = 0, base_reg = 0, scale;
+	int rc = 0;
+
+	if (c->rex_prefix) {
+		c->modrm_reg = (c->rex_prefix & 4) << 1;	/* REX.R */
+		index_reg = (c->rex_prefix & 2) << 2; /* REX.X */
+		c->modrm_rm = base_reg = (c->rex_prefix & 1) << 3; /* REG.B */
+	}
+
+	c->modrm = insn_fetch(u8, 1, c->eip);
+	c->modrm_mod |= (c->modrm & 0xc0) >> 6;
+	c->modrm_reg |= (c->modrm & 0x38) >> 3;
+	c->modrm_rm |= (c->modrm & 0x07);
+	c->modrm_ea = 0;
+	c->use_modrm_ea = 1;
+
+	if (c->modrm_mod == 3) {
+		c->modrm_ptr = decode_register(c->modrm_rm,
+					       c->regs, c->d & ByteOp);
+		c->modrm_val = *(unsigned long *)c->modrm_ptr;
+		return rc;
+	}
+
+	if (c->ad_bytes == 2) {
+		unsigned bx = c->regs[VCPU_REGS_RBX];
+		unsigned bp = c->regs[VCPU_REGS_RBP];
+		unsigned si = c->regs[VCPU_REGS_RSI];
+		unsigned di = c->regs[VCPU_REGS_RDI];
+
+		/* 16-bit ModR/M decode. */
+		switch (c->modrm_mod) {
+		case 0:
+			if (c->modrm_rm == 6)
+				c->modrm_ea += insn_fetch(u16, 2, c->eip);
+			break;
+		case 1:
+			c->modrm_ea += insn_fetch(s8, 1, c->eip);
+			break;
+		case 2:
+			c->modrm_ea += insn_fetch(u16, 2, c->eip);
+			break;
+		}
+		switch (c->modrm_rm) {
+		case 0:
+			c->modrm_ea += bx + si;
+			break;
+		case 1:
+			c->modrm_ea += bx + di;
+			break;
+		case 2:
+			c->modrm_ea += bp + si;
+			break;
+		case 3:
+			c->modrm_ea += bp + di;
+			break;
+		case 4:
+			c->modrm_ea += si;
+			break;
+		case 5:
+			c->modrm_ea += di;
+			break;
+		case 6:
+			if (c->modrm_mod != 0)
+				c->modrm_ea += bp;
+			break;
+		case 7:
+			c->modrm_ea += bx;
+			break;
+		}
+		if (c->modrm_rm == 2 || c->modrm_rm == 3 ||
+		    (c->modrm_rm == 6 && c->modrm_mod != 0))
+			if (!c->has_seg_override)
+				set_seg_override(c, VCPU_SREG_SS);
+		c->modrm_ea = (u16)c->modrm_ea;
+	} else {
+		/* 32/64-bit ModR/M decode. */
+		if ((c->modrm_rm & 7) == 4) {
+			sib = insn_fetch(u8, 1, c->eip);
+			index_reg |= (sib >> 3) & 7;
+			base_reg |= sib & 7;
+			scale = sib >> 6;
+
+			if ((base_reg & 7) == 5 && c->modrm_mod == 0)
+				c->modrm_ea += insn_fetch(s32, 4, c->eip);
+			else
+				c->modrm_ea += c->regs[base_reg];
+			if (index_reg != 4)
+				c->modrm_ea += c->regs[index_reg] << scale;
+		} else if ((c->modrm_rm & 7) == 5 && c->modrm_mod == 0) {
+			if (ctxt->mode == X86EMUL_MODE_PROT64)
+				c->rip_relative = 1;
+		} else
+			c->modrm_ea += c->regs[c->modrm_rm];
+		switch (c->modrm_mod) {
+		case 0:
+			if (c->modrm_rm == 5)
+				c->modrm_ea += insn_fetch(s32, 4, c->eip);
+			break;
+		case 1:
+			c->modrm_ea += insn_fetch(s8, 1, c->eip);
+			break;
+		case 2:
+			c->modrm_ea += insn_fetch(s32, 4, c->eip);
+			break;
+		}
+	}
+done:
+	return rc;
+}
+
+static int decode_abs(struct x86_emulate_ctxt *ctxt,
+		      struct x86_emulate_ops *ops)
+{
+	struct decode_cache *c = &ctxt->decode;
+	int rc = 0;
+
+	switch (c->ad_bytes) {
+	case 2:
+		c->modrm_ea = insn_fetch(u16, 2, c->eip);
+		break;
+	case 4:
+		c->modrm_ea = insn_fetch(u32, 4, c->eip);
+		break;
+	case 8:
+		c->modrm_ea = insn_fetch(u64, 8, c->eip);
+		break;
+	}
+done:
+	return rc;
+}
+
+int
+x86_decode_insn(struct x86_emulate_ctxt *ctxt, struct x86_emulate_ops *ops)
+{
+	struct decode_cache *c = &ctxt->decode;
+	int rc = 0;
+	int mode = ctxt->mode;
+	int def_op_bytes, def_ad_bytes, group;
+
+	/* Shadow copy of register state. Committed on successful emulation. */
+
+	memset(c, 0, sizeof(struct decode_cache));
+	c->eip = kvm_rip_read(ctxt->vcpu);
+	ctxt->cs_base = seg_base(ctxt, VCPU_SREG_CS);
+	memcpy(c->regs, ctxt->vcpu->arch.regs, sizeof c->regs);
+
+	switch (mode) {
+	case X86EMUL_MODE_REAL:
+	case X86EMUL_MODE_PROT16:
+		def_op_bytes = def_ad_bytes = 2;
+		break;
+	case X86EMUL_MODE_PROT32:
+		def_op_bytes = def_ad_bytes = 4;
+		break;
+#ifdef CONFIG_X86_64
+	case X86EMUL_MODE_PROT64:
+		def_op_bytes = 4;
+		def_ad_bytes = 8;
+		break;
+#endif
+	default:
+		return -1;
+	}
+
+	c->op_bytes = def_op_bytes;
+	c->ad_bytes = def_ad_bytes;
+
+	/* Legacy prefixes. */
+	for (;;) {
+		switch (c->b = insn_fetch(u8, 1, c->eip)) {
+		case 0x66:	/* operand-size override */
+			/* switch between 2/4 bytes */
+			c->op_bytes = def_op_bytes ^ 6;
+			break;
+		case 0x67:	/* address-size override */
+			if (mode == X86EMUL_MODE_PROT64)
+				/* switch between 4/8 bytes */
+				c->ad_bytes = def_ad_bytes ^ 12;
+			else
+				/* switch between 2/4 bytes */
+				c->ad_bytes = def_ad_bytes ^ 6;
+			break;
+		case 0x26:	/* ES override */
+		case 0x2e:	/* CS override */
+		case 0x36:	/* SS override */
+		case 0x3e:	/* DS override */
+			set_seg_override(c, (c->b >> 3) & 3);
+			break;
+		case 0x64:	/* FS override */
+		case 0x65:	/* GS override */
+			set_seg_override(c, c->b & 7);
+			break;
+		case 0x40 ... 0x4f: /* REX */
+			if (mode != X86EMUL_MODE_PROT64)
+				goto done_prefixes;
+			c->rex_prefix = c->b;
+			continue;
+		case 0xf0:	/* LOCK */
+			c->lock_prefix = 1;
+			break;
+		case 0xf2:	/* REPNE/REPNZ */
+			c->rep_prefix = REPNE_PREFIX;
+			break;
+		case 0xf3:	/* REP/REPE/REPZ */
+			c->rep_prefix = REPE_PREFIX;
+			break;
+		default:
+			goto done_prefixes;
+		}
+
+		/* Any legacy prefix after a REX prefix nullifies its effect. */
+
+		c->rex_prefix = 0;
+	}
+
+done_prefixes:
+
+	/* REX prefix. */
+	if (c->rex_prefix)
+		if (c->rex_prefix & 8)
+			c->op_bytes = 8;	/* REX.W */
+
+	/* Opcode byte(s). */
+	c->d = opcode_table[c->b];
+	if (c->d == 0) {
+		/* Two-byte opcode? */
+		if (c->b == 0x0f) {
+			c->twobyte = 1;
+			c->b = insn_fetch(u8, 1, c->eip);
+			c->d = twobyte_table[c->b];
+		}
+	}
+
+	if (c->d & Group) {
+		group = c->d & GroupMask;
+		c->modrm = insn_fetch(u8, 1, c->eip);
+		--c->eip;
+
+		group = (group << 3) + ((c->modrm >> 3) & 7);
+		if ((c->d & GroupDual) && (c->modrm >> 6) == 3)
+			c->d = group2_table[group];
+		else
+			c->d = group_table[group];
+	}
+
+	/* Unrecognised? */
+	if (c->d == 0) {
+		DPRINTF("Cannot emulate %02x\n", c->b);
+		return -1;
+	}
+
+	if (mode == X86EMUL_MODE_PROT64 && (c->d & Stack))
+		c->op_bytes = 8;
+
+	/* ModRM and SIB bytes. */
+	if (c->d & ModRM)
+		rc = decode_modrm(ctxt, ops);
+	else if (c->d & MemAbs)
+		rc = decode_abs(ctxt, ops);
+	if (rc)
+		goto done;
+
+	if (!c->has_seg_override)
+		set_seg_override(c, VCPU_SREG_DS);
+
+	if (!(!c->twobyte && c->b == 0x8d))
+		c->modrm_ea += seg_override_base(ctxt, c);
+
+	if (c->ad_bytes != 8)
+		c->modrm_ea = (u32)c->modrm_ea;
+	/*
+	 * Decode and fetch the source operand: register, memory
+	 * or immediate.
+	 */
+	switch (c->d & SrcMask) {
+	case SrcNone:
+		break;
+	case SrcReg:
+		decode_register_operand(&c->src, c, 0);
+		break;
+	case SrcMem16:
+		c->src.bytes = 2;
+		goto srcmem_common;
+	case SrcMem32:
+		c->src.bytes = 4;
+		goto srcmem_common;
+	case SrcMem:
+		c->src.bytes = (c->d & ByteOp) ? 1 :
+							   c->op_bytes;
+		/* Don't fetch the address for invlpg: it could be unmapped. */
+		if (c->twobyte && c->b == 0x01 && c->modrm_reg == 7)
+			break;
+	srcmem_common:
+		/*
+		 * For instructions with a ModR/M byte, switch to register
+		 * access if Mod = 3.
+		 */
+		if ((c->d & ModRM) && c->modrm_mod == 3) {
+			c->src.type = OP_REG;
+			c->src.val = c->modrm_val;
+			c->src.ptr = c->modrm_ptr;
+			break;
+		}
+		c->src.type = OP_MEM;
+		break;
+	case SrcImm:
+	case SrcImmU:
+		c->src.type = OP_IMM;
+		c->src.ptr = (unsigned long *)c->eip;
+		c->src.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
+		if (c->src.bytes == 8)
+			c->src.bytes = 4;
+		/* NB. Immediates are sign-extended as necessary. */
+		switch (c->src.bytes) {
+		case 1:
+			c->src.val = insn_fetch(s8, 1, c->eip);
+			break;
+		case 2:
+			c->src.val = insn_fetch(s16, 2, c->eip);
+			break;
+		case 4:
+			c->src.val = insn_fetch(s32, 4, c->eip);
+			break;
+		}
+		if ((c->d & SrcMask) == SrcImmU) {
+			switch (c->src.bytes) {
+			case 1:
+				c->src.val &= 0xff;
+				break;
+			case 2:
+				c->src.val &= 0xffff;
+				break;
+			case 4:
+				c->src.val &= 0xffffffff;
+				break;
+			}
+		}
+		break;
+	case SrcImmByte:
+	case SrcImmUByte:
+		c->src.type = OP_IMM;
+		c->src.ptr = (unsigned long *)c->eip;
+		c->src.bytes = 1;
+		if ((c->d & SrcMask) == SrcImmByte)
+			c->src.val = insn_fetch(s8, 1, c->eip);
+		else
+			c->src.val = insn_fetch(u8, 1, c->eip);
+		break;
+	case SrcOne:
+		c->src.bytes = 1;
+		c->src.val = 1;
+		break;
+	}
+
+	/*
+	 * Decode and fetch the second source operand: register, memory
+	 * or immediate.
+	 */
+	switch (c->d & Src2Mask) {
+	case Src2None:
+		break;
+	case Src2CL:
+		c->src2.bytes = 1;
+		c->src2.val = c->regs[VCPU_REGS_RCX] & 0x8;
+		break;
+	case Src2ImmByte:
+		c->src2.type = OP_IMM;
+		c->src2.ptr = (unsigned long *)c->eip;
+		c->src2.bytes = 1;
+		c->src2.val = insn_fetch(u8, 1, c->eip);
+		break;
+	case Src2Imm16:
+		c->src2.type = OP_IMM;
+		c->src2.ptr = (unsigned long *)c->eip;
+		c->src2.bytes = 2;
+		c->src2.val = insn_fetch(u16, 2, c->eip);
+		break;
+	case Src2One:
+		c->src2.bytes = 1;
+		c->src2.val = 1;
+		break;
+	}
+
+	/* Decode and fetch the destination operand: register or memory. */
+	switch (c->d & DstMask) {
+	case ImplicitOps:
+		/* Special instructions do their own operand decoding. */
+		return 0;
+	case DstReg:
+		decode_register_operand(&c->dst, c,
+			 c->twobyte && (c->b == 0xb6 || c->b == 0xb7));
+		break;
+	case DstMem:
+		if ((c->d & ModRM) && c->modrm_mod == 3) {
+			c->dst.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
+			c->dst.type = OP_REG;
+			c->dst.val = c->dst.orig_val = c->modrm_val;
+			c->dst.ptr = c->modrm_ptr;
+			break;
+		}
+		c->dst.type = OP_MEM;
+		break;
+	case DstAcc:
+		c->dst.type = OP_REG;
+		c->dst.bytes = c->op_bytes;
+		c->dst.ptr = &c->regs[VCPU_REGS_RAX];
+		switch (c->op_bytes) {
+			case 1:
+				c->dst.val = *(u8 *)c->dst.ptr;
+				break;
+			case 2:
+				c->dst.val = *(u16 *)c->dst.ptr;
+				break;
+			case 4:
+				c->dst.val = *(u32 *)c->dst.ptr;
+				break;
+		}
+		c->dst.orig_val = c->dst.val;
+		break;
+	}
+
+	if (c->rip_relative)
+		c->modrm_ea += c->eip;
+
+done:
+	return (rc == X86EMUL_UNHANDLEABLE) ? -1 : 0;
+}
+
+static inline void emulate_push(struct x86_emulate_ctxt *ctxt)
+{
+	struct decode_cache *c = &ctxt->decode;
+
+	c->dst.type  = OP_MEM;
+	c->dst.bytes = c->op_bytes;
+	c->dst.val = c->src.val;
+	register_address_increment(c, &c->regs[VCPU_REGS_RSP], -c->op_bytes);
+	c->dst.ptr = (void *) register_address(c, ss_base(ctxt),
+					       c->regs[VCPU_REGS_RSP]);
+}
+
+static int emulate_pop(struct x86_emulate_ctxt *ctxt,
+		       struct x86_emulate_ops *ops,
+		       void *dest, int len)
+{
+	struct decode_cache *c = &ctxt->decode;
+	int rc;
+
+	rc = ops->read_emulated(register_address(c, ss_base(ctxt),
+						 c->regs[VCPU_REGS_RSP]),
+				dest, len, ctxt->vcpu);
+	if (rc != 0)
+		return rc;
+
+	register_address_increment(c, &c->regs[VCPU_REGS_RSP], len);
+	return rc;
+}
+
+static inline int emulate_grp1a(struct x86_emulate_ctxt *ctxt,
+				struct x86_emulate_ops *ops)
+{
+	struct decode_cache *c = &ctxt->decode;
+	int rc;
+
+	rc = emulate_pop(ctxt, ops, &c->dst.val, c->dst.bytes);
+	if (rc != 0)
+		return rc;
+	return 0;
+}
+
+static inline void emulate_grp2(struct x86_emulate_ctxt *ctxt)
+{
+	struct decode_cache *c = &ctxt->decode;
+	switch (c->modrm_reg) {
+	case 0:	/* rol */
+		emulate_2op_SrcB("rol", c->src, c->dst, ctxt->eflags);
+		break;
+	case 1:	/* ror */
+		emulate_2op_SrcB("ror", c->src, c->dst, ctxt->eflags);
+		break;
+	case 2:	/* rcl */
+		emulate_2op_SrcB("rcl", c->src, c->dst, ctxt->eflags);
+		break;
+	case 3:	/* rcr */
+		emulate_2op_SrcB("rcr", c->src, c->dst, ctxt->eflags);
+		break;
+	case 4:	/* sal/shl */
+	case 6:	/* sal/shl */
+		emulate_2op_SrcB("sal", c->src, c->dst, ctxt->eflags);
+		break;
+	case 5:	/* shr */
+		emulate_2op_SrcB("shr", c->src, c->dst, ctxt->eflags);
+		break;
+	case 7:	/* sar */
+		emulate_2op_SrcB("sar", c->src, c->dst, ctxt->eflags);
+		break;
+	}
+}
+
+static inline int emulate_grp3(struct x86_emulate_ctxt *ctxt,
+			       struct x86_emulate_ops *ops)
+{
+	struct decode_cache *c = &ctxt->decode;
+	int rc = 0;
+
+	switch (c->modrm_reg) {
+	case 0 ... 1:	/* test */
+		emulate_2op_SrcV("test", c->src, c->dst, ctxt->eflags);
+		break;
+	case 2:	/* not */
+		c->dst.val = ~c->dst.val;
+		break;
+	case 3:	/* neg */
+		emulate_1op("neg", c->dst, ctxt->eflags);
+		break;
+	default:
+		DPRINTF("Cannot emulate %02x\n", c->b);
+		rc = X86EMUL_UNHANDLEABLE;
+		break;
+	}
+	return rc;
+}
+
+static inline int emulate_grp45(struct x86_emulate_ctxt *ctxt,
+			       struct x86_emulate_ops *ops)
+{
+	struct decode_cache *c = &ctxt->decode;
+
+	switch (c->modrm_reg) {
+	case 0:	/* inc */
+		emulate_1op("inc", c->dst, ctxt->eflags);
+		break;
+	case 1:	/* dec */
+		emulate_1op("dec", c->dst, ctxt->eflags);
+		break;
+	case 2: /* call near abs */ {
+		long int old_eip;
+		old_eip = c->eip;
+		c->eip = c->src.val;
+		c->src.val = old_eip;
+		emulate_push(ctxt);
+		break;
+	}
+	case 4: /* jmp abs */
+		c->eip = c->src.val;
+		break;
+	case 6:	/* push */
+		emulate_push(ctxt);
+		break;
+	}
+	return 0;
+}
+
+static inline int emulate_grp9(struct x86_emulate_ctxt *ctxt,
+			       struct x86_emulate_ops *ops,
+			       unsigned long memop)
+{
+	struct decode_cache *c = &ctxt->decode;
+	u64 old, new;
+	int rc;
+
+	rc = ops->read_emulated(memop, &old, 8, ctxt->vcpu);
+	if (rc != 0)
+		return rc;
+
+	if (((u32) (old >> 0) != (u32) c->regs[VCPU_REGS_RAX]) ||
+	    ((u32) (old >> 32) != (u32) c->regs[VCPU_REGS_RDX])) {
+
+		c->regs[VCPU_REGS_RAX] = (u32) (old >> 0);
+		c->regs[VCPU_REGS_RDX] = (u32) (old >> 32);
+		ctxt->eflags &= ~EFLG_ZF;
+
+	} else {
+		new = ((u64)c->regs[VCPU_REGS_RCX] << 32) |
+		       (u32) c->regs[VCPU_REGS_RBX];
+
+		rc = ops->cmpxchg_emulated(memop, &old, &new, 8, ctxt->vcpu);
+		if (rc != 0)
+			return rc;
+		ctxt->eflags |= EFLG_ZF;
+	}
+	return 0;
+}
+
+static int emulate_ret_far(struct x86_emulate_ctxt *ctxt,
+			   struct x86_emulate_ops *ops)
+{
+	struct decode_cache *c = &ctxt->decode;
+	int rc;
+	unsigned long cs;
+
+	rc = emulate_pop(ctxt, ops, &c->eip, c->op_bytes);
+	if (rc)
+		return rc;
+	if (c->op_bytes == 4)
+		c->eip = (u32)c->eip;
+	rc = emulate_pop(ctxt, ops, &cs, c->op_bytes);
+	if (rc)
+		return rc;
+	rc = kvm_load_segment_descriptor(ctxt->vcpu, (u16)cs, 1, VCPU_SREG_CS);
+	return rc;
+}
+
+static inline int writeback(struct x86_emulate_ctxt *ctxt,
+			    struct x86_emulate_ops *ops)
+{
+	int rc;
+	struct decode_cache *c = &ctxt->decode;
+
+	switch (c->dst.type) {
+	case OP_REG:
+		/* The 4-byte case *is* correct:
+		 * in 64-bit mode we zero-extend.
+		 */
+		switch (c->dst.bytes) {
+		case 1:
+			*(u8 *)c->dst.ptr = (u8)c->dst.val;
+			break;
+		case 2:
+			*(u16 *)c->dst.ptr = (u16)c->dst.val;
+			break;
+		case 4:
+			*c->dst.ptr = (u32)c->dst.val;
+			break;	/* 64b: zero-ext */
+		case 8:
+			*c->dst.ptr = c->dst.val;
+			break;
+		}
+		break;
+	case OP_MEM:
+		if (c->lock_prefix)
+			rc = ops->cmpxchg_emulated(
+					(unsigned long)c->dst.ptr,
+					&c->dst.orig_val,
+					&c->dst.val,
+					c->dst.bytes,
+					ctxt->vcpu);
+		else
+			rc = ops->write_emulated(
+					(unsigned long)c->dst.ptr,
+					&c->dst.val,
+					c->dst.bytes,
+					ctxt->vcpu);
+		if (rc != 0)
+			return rc;
+		break;
+	case OP_NONE:
+		/* no writeback */
+		break;
+	default:
+		break;
+	}
+	return 0;
+}
+
+static void toggle_interruptibility(struct x86_emulate_ctxt *ctxt, u32 mask)
+{
+	u32 int_shadow = kvm_x86_ops->get_interrupt_shadow(ctxt->vcpu, mask);
+	/*
+	 * an sti; sti; sequence only disable interrupts for the first
+	 * instruction. So, if the last instruction, be it emulated or
+	 * not, left the system with the INT_STI flag enabled, it
+	 * means that the last instruction is an sti. We should not
+	 * leave the flag on in this case. The same goes for mov ss
+	 */
+	if (!(int_shadow & mask))
+		ctxt->interruptibility = mask;
+}
+
+static inline void
+setup_syscalls_segments(struct x86_emulate_ctxt *ctxt,
+	struct kvm_segment *cs, struct kvm_segment *ss)
+{
+	memset(cs, 0, sizeof(struct kvm_segment));
+	kvm_x86_ops->get_segment(ctxt->vcpu, cs, VCPU_SREG_CS);
+	memset(ss, 0, sizeof(struct kvm_segment));
+
+	cs->l = 0;		/* will be adjusted later */
+	cs->base = 0;		/* flat segment */
+	cs->g = 1;		/* 4kb granularity */
+	cs->limit = 0xffffffff;	/* 4GB limit */
+	cs->type = 0x0b;	/* Read, Execute, Accessed */
+	cs->s = 1;
+	cs->dpl = 0;		/* will be adjusted later */
+	cs->present = 1;
+	cs->db = 1;
+
+	ss->unusable = 0;
+	ss->base = 0;		/* flat segment */
+	ss->limit = 0xffffffff;	/* 4GB limit */
+	ss->g = 1;		/* 4kb granularity */
+	ss->s = 1;
+	ss->type = 0x03;	/* Read/Write, Accessed */
+	ss->db = 1;		/* 32bit stack segment */
+	ss->dpl = 0;
+	ss->present = 1;
+}
+
+static int
+emulate_syscall(struct x86_emulate_ctxt *ctxt)
+{
+	struct decode_cache *c = &ctxt->decode;
+	struct kvm_segment cs, ss;
+	u64 msr_data;
+
+	/* syscall is not available in real mode */
+	if (c->lock_prefix || ctxt->mode == X86EMUL_MODE_REAL
+		|| !(ctxt->vcpu->arch.cr0 & X86_CR0_PE))
+		return -1;
+
+	setup_syscalls_segments(ctxt, &cs, &ss);
+
+	kvm_x86_ops->get_msr(ctxt->vcpu, MSR_STAR, &msr_data);
+	msr_data >>= 32;
+	cs.selector = (u16)(msr_data & 0xfffc);
+	ss.selector = (u16)(msr_data + 8);
+
+	if (is_long_mode(ctxt->vcpu)) {
+		cs.db = 0;
+		cs.l = 1;
+	}
+	kvm_x86_ops->set_segment(ctxt->vcpu, &cs, VCPU_SREG_CS);
+	kvm_x86_ops->set_segment(ctxt->vcpu, &ss, VCPU_SREG_SS);
+
+	c->regs[VCPU_REGS_RCX] = c->eip;
+	if (is_long_mode(ctxt->vcpu)) {
+#ifdef CONFIG_X86_64
+		c->regs[VCPU_REGS_R11] = ctxt->eflags & ~EFLG_RF;
+
+		kvm_x86_ops->get_msr(ctxt->vcpu,
+			ctxt->mode == X86EMUL_MODE_PROT64 ?
+			MSR_LSTAR : MSR_CSTAR, &msr_data);
+		c->eip = msr_data;
+
+		kvm_x86_ops->get_msr(ctxt->vcpu, MSR_SYSCALL_MASK, &msr_data);
+		ctxt->eflags &= ~(msr_data | EFLG_RF);
+#endif
+	} else {
+		/* legacy mode */
+		kvm_x86_ops->get_msr(ctxt->vcpu, MSR_STAR, &msr_data);
+		c->eip = (u32)msr_data;
+
+		ctxt->eflags &= ~(EFLG_VM | EFLG_IF | EFLG_RF);
+	}
+
+	return 0;
+}
+
+static int
+emulate_sysenter(struct x86_emulate_ctxt *ctxt)
+{
+	struct decode_cache *c = &ctxt->decode;
+	struct kvm_segment cs, ss;
+	u64 msr_data;
+
+	/* inject #UD if LOCK prefix is used */
+	if (c->lock_prefix)
+		return -1;
+
+	/* inject #GP if in real mode or paging is disabled */
+	if (ctxt->mode == X86EMUL_MODE_REAL ||
+		!(ctxt->vcpu->arch.cr0 & X86_CR0_PE)) {
+		kvm_inject_gp(ctxt->vcpu, 0);
+		return -1;
+	}
+
+	/* XXX sysenter/sysexit have not been tested in 64bit mode.
+	* Therefore, we inject an #UD.
+	*/
+	if (ctxt->mode == X86EMUL_MODE_PROT64)
+		return -1;
+
+	setup_syscalls_segments(ctxt, &cs, &ss);
+
+	kvm_x86_ops->get_msr(ctxt->vcpu, MSR_IA32_SYSENTER_CS, &msr_data);
+	switch (ctxt->mode) {
+	case X86EMUL_MODE_PROT32:
+		if ((msr_data & 0xfffc) == 0x0) {
+			kvm_inject_gp(ctxt->vcpu, 0);
+			return -1;
+		}
+		break;
+	case X86EMUL_MODE_PROT64:
+		if (msr_data == 0x0) {
+			kvm_inject_gp(ctxt->vcpu, 0);
+			return -1;
+		}
+		break;
+	}
+
+	ctxt->eflags &= ~(EFLG_VM | EFLG_IF | EFLG_RF);
+	cs.selector = (u16)msr_data;
+	cs.selector &= ~SELECTOR_RPL_MASK;
+	ss.selector = cs.selector + 8;
+	ss.selector &= ~SELECTOR_RPL_MASK;
+	if (ctxt->mode == X86EMUL_MODE_PROT64
+		|| is_long_mode(ctxt->vcpu)) {
+		cs.db = 0;
+		cs.l = 1;
+	}
+
+	kvm_x86_ops->set_segment(ctxt->vcpu, &cs, VCPU_SREG_CS);
+	kvm_x86_ops->set_segment(ctxt->vcpu, &ss, VCPU_SREG_SS);
+
+	kvm_x86_ops->get_msr(ctxt->vcpu, MSR_IA32_SYSENTER_EIP, &msr_data);
+	c->eip = msr_data;
+
+	kvm_x86_ops->get_msr(ctxt->vcpu, MSR_IA32_SYSENTER_ESP, &msr_data);
+	c->regs[VCPU_REGS_RSP] = msr_data;
+
+	return 0;
+}
+
+static int
+emulate_sysexit(struct x86_emulate_ctxt *ctxt)
+{
+	struct decode_cache *c = &ctxt->decode;
+	struct kvm_segment cs, ss;
+	u64 msr_data;
+	int usermode;
+
+	/* inject #UD if LOCK prefix is used */
+	if (c->lock_prefix)
+		return -1;
+
+	/* inject #GP if in real mode or paging is disabled */
+	if (ctxt->mode == X86EMUL_MODE_REAL
+		|| !(ctxt->vcpu->arch.cr0 & X86_CR0_PE)) {
+		kvm_inject_gp(ctxt->vcpu, 0);
+		return -1;
+	}
+
+	/* sysexit must be called from CPL 0 */
+	if (kvm_x86_ops->get_cpl(ctxt->vcpu) != 0) {
+		kvm_inject_gp(ctxt->vcpu, 0);
+		return -1;
+	}
+
+	setup_syscalls_segments(ctxt, &cs, &ss);
+
+	if ((c->rex_prefix & 0x8) != 0x0)
+		usermode = X86EMUL_MODE_PROT64;
+	else
+		usermode = X86EMUL_MODE_PROT32;
+
+	cs.dpl = 3;
+	ss.dpl = 3;
+	kvm_x86_ops->get_msr(ctxt->vcpu, MSR_IA32_SYSENTER_CS, &msr_data);
+	switch (usermode) {
+	case X86EMUL_MODE_PROT32:
+		cs.selector = (u16)(msr_data + 16);
+		if ((msr_data & 0xfffc) == 0x0) {
+			kvm_inject_gp(ctxt->vcpu, 0);
+			return -1;
+		}
+		ss.selector = (u16)(msr_data + 24);
+		break;
+	case X86EMUL_MODE_PROT64:
+		cs.selector = (u16)(msr_data + 32);
+		if (msr_data == 0x0) {
+			kvm_inject_gp(ctxt->vcpu, 0);
+			return -1;
+		}
+		ss.selector = cs.selector + 8;
+		cs.db = 0;
+		cs.l = 1;
+		break;
+	}
+	cs.selector |= SELECTOR_RPL_MASK;
+	ss.selector |= SELECTOR_RPL_MASK;
+
+	kvm_x86_ops->set_segment(ctxt->vcpu, &cs, VCPU_SREG_CS);
+	kvm_x86_ops->set_segment(ctxt->vcpu, &ss, VCPU_SREG_SS);
+
+	c->eip = ctxt->vcpu->arch.regs[VCPU_REGS_RDX];
+	c->regs[VCPU_REGS_RSP] = ctxt->vcpu->arch.regs[VCPU_REGS_RCX];
+
+	return 0;
+}
+
+int
+x86_emulate_insn(struct x86_emulate_ctxt *ctxt, struct x86_emulate_ops *ops)
+{
+	unsigned long memop = 0;
+	u64 msr_data;
+	unsigned long saved_eip = 0;
+	struct decode_cache *c = &ctxt->decode;
+	unsigned int port;
+	int io_dir_in;
+	int rc = 0;
+
+	ctxt->interruptibility = 0;
+
+	/* Shadow copy of register state. Committed on successful emulation.
+	 * NOTE: we can copy them from vcpu as x86_decode_insn() doesn't
+	 * modify them.
+	 */
+
+	memcpy(c->regs, ctxt->vcpu->arch.regs, sizeof c->regs);
+	saved_eip = c->eip;
+
+	if (((c->d & ModRM) && (c->modrm_mod != 3)) || (c->d & MemAbs))
+		memop = c->modrm_ea;
+
+	if (c->rep_prefix && (c->d & String)) {
+		/* All REP prefixes have the same first termination condition */
+		if (c->regs[VCPU_REGS_RCX] == 0) {
+			kvm_rip_write(ctxt->vcpu, c->eip);
+			goto done;
+		}
+		/* The second termination condition only applies for REPE
+		 * and REPNE. Test if the repeat string operation prefix is
+		 * REPE/REPZ or REPNE/REPNZ and if it's the case it tests the
+		 * corresponding termination condition according to:
+		 * 	- if REPE/REPZ and ZF = 0 then done
+		 * 	- if REPNE/REPNZ and ZF = 1 then done
+		 */
+		if ((c->b == 0xa6) || (c->b == 0xa7) ||
+				(c->b == 0xae) || (c->b == 0xaf)) {
+			if ((c->rep_prefix == REPE_PREFIX) &&
+				((ctxt->eflags & EFLG_ZF) == 0)) {
+					kvm_rip_write(ctxt->vcpu, c->eip);
+					goto done;
+			}
+			if ((c->rep_prefix == REPNE_PREFIX) &&
+				((ctxt->eflags & EFLG_ZF) == EFLG_ZF)) {
+				kvm_rip_write(ctxt->vcpu, c->eip);
+				goto done;
+			}
+		}
+		c->regs[VCPU_REGS_RCX]--;
+		c->eip = kvm_rip_read(ctxt->vcpu);
+	}
+
+	if (c->src.type == OP_MEM) {
+		c->src.ptr = (unsigned long *)memop;
+		c->src.val = 0;
+		rc = ops->read_emulated((unsigned long)c->src.ptr,
+					&c->src.val,
+					c->src.bytes,
+					ctxt->vcpu);
+		if (rc != 0)
+			goto done;
+		c->src.orig_val = c->src.val;
+	}
+
+	if ((c->d & DstMask) == ImplicitOps)
+		goto special_insn;
+
+
+	if (c->dst.type == OP_MEM) {
+		c->dst.ptr = (unsigned long *)memop;
+		c->dst.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
+		c->dst.val = 0;
+		if (c->d & BitOp) {
+			unsigned long mask = ~(c->dst.bytes * 8 - 1);
+
+			c->dst.ptr = (void *)c->dst.ptr +
+						   (c->src.val & mask) / 8;
+		}
+		if (!(c->d & Mov) &&
+				   /* optimisation - avoid slow emulated read */
+		    ((rc = ops->read_emulated((unsigned long)c->dst.ptr,
+					   &c->dst.val,
+					  c->dst.bytes, ctxt->vcpu)) != 0))
+			goto done;
+	}
+	c->dst.orig_val = c->dst.val;
+
+special_insn:
+
+	if (c->twobyte)
+		goto twobyte_insn;
+
+	switch (c->b) {
+	case 0x00 ... 0x05:
+	      add:		/* add */
+		emulate_2op_SrcV("add", c->src, c->dst, ctxt->eflags);
+		break;
+	case 0x08 ... 0x0d:
+	      or:		/* or */
+		emulate_2op_SrcV("or", c->src, c->dst, ctxt->eflags);
+		break;
+	case 0x10 ... 0x15:
+	      adc:		/* adc */
+		emulate_2op_SrcV("adc", c->src, c->dst, ctxt->eflags);
+		break;
+	case 0x18 ... 0x1d:
+	      sbb:		/* sbb */
+		emulate_2op_SrcV("sbb", c->src, c->dst, ctxt->eflags);
+		break;
+	case 0x20 ... 0x25:
+	      and:		/* and */
+		emulate_2op_SrcV("and", c->src, c->dst, ctxt->eflags);
+		break;
+	case 0x28 ... 0x2d:
+	      sub:		/* sub */
+		emulate_2op_SrcV("sub", c->src, c->dst, ctxt->eflags);
+		break;
+	case 0x30 ... 0x35:
+	      xor:		/* xor */
+		emulate_2op_SrcV("xor", c->src, c->dst, ctxt->eflags);
+		break;
+	case 0x38 ... 0x3d:
+	      cmp:		/* cmp */
+		emulate_2op_SrcV("cmp", c->src, c->dst, ctxt->eflags);
+		break;
+	case 0x40 ... 0x47: /* inc r16/r32 */
+		emulate_1op("inc", c->dst, ctxt->eflags);
+		break;
+	case 0x48 ... 0x4f: /* dec r16/r32 */
+		emulate_1op("dec", c->dst, ctxt->eflags);
+		break;
+	case 0x50 ... 0x57:  /* push reg */
+		emulate_push(ctxt);
+		break;
+	case 0x58 ... 0x5f: /* pop reg */
+	pop_instruction:
+		rc = emulate_pop(ctxt, ops, &c->dst.val, c->op_bytes);
+		if (rc != 0)
+			goto done;
+		break;
+	case 0x63:		/* movsxd */
+		if (ctxt->mode != X86EMUL_MODE_PROT64)
+			goto cannot_emulate;
+		c->dst.val = (s32) c->src.val;
+		break;
+	case 0x68: /* push imm */
+	case 0x6a: /* push imm8 */
+		emulate_push(ctxt);
+		break;
+	case 0x6c:		/* insb */
+	case 0x6d:		/* insw/insd */
+		 if (kvm_emulate_pio_string(ctxt->vcpu, NULL,
+				1,
+				(c->d & ByteOp) ? 1 : c->op_bytes,
+				c->rep_prefix ?
+				address_mask(c, c->regs[VCPU_REGS_RCX]) : 1,
+				(ctxt->eflags & EFLG_DF),
+				register_address(c, es_base(ctxt),
+						 c->regs[VCPU_REGS_RDI]),
+				c->rep_prefix,
+				c->regs[VCPU_REGS_RDX]) == 0) {
+			c->eip = saved_eip;
+			return -1;
+		}
+		return 0;
+	case 0x6e:		/* outsb */
+	case 0x6f:		/* outsw/outsd */
+		if (kvm_emulate_pio_string(ctxt->vcpu, NULL,
+				0,
+				(c->d & ByteOp) ? 1 : c->op_bytes,
+				c->rep_prefix ?
+				address_mask(c, c->regs[VCPU_REGS_RCX]) : 1,
+				(ctxt->eflags & EFLG_DF),
+					 register_address(c,
+					  seg_override_base(ctxt, c),
+						 c->regs[VCPU_REGS_RSI]),
+				c->rep_prefix,
+				c->regs[VCPU_REGS_RDX]) == 0) {
+			c->eip = saved_eip;
+			return -1;
+		}
+		return 0;
+	case 0x70 ... 0x7f: /* jcc (short) */
+		if (test_cc(c->b, ctxt->eflags))
+			jmp_rel(c, c->src.val);
+		break;
+	case 0x80 ... 0x83:	/* Grp1 */
+		switch (c->modrm_reg) {
+		case 0:
+			goto add;
+		case 1:
+			goto or;
+		case 2:
+			goto adc;
+		case 3:
+			goto sbb;
+		case 4:
+			goto and;
+		case 5:
+			goto sub;
+		case 6:
+			goto xor;
+		case 7:
+			goto cmp;
+		}
+		break;
+	case 0x84 ... 0x85:
+		emulate_2op_SrcV("test", c->src, c->dst, ctxt->eflags);
+		break;
+	case 0x86 ... 0x87:	/* xchg */
+	xchg:
+		/* Write back the register source. */
+		switch (c->dst.bytes) {
+		case 1:
+			*(u8 *) c->src.ptr = (u8) c->dst.val;
+			break;
+		case 2:
+			*(u16 *) c->src.ptr = (u16) c->dst.val;
+			break;
+		case 4:
+			*c->src.ptr = (u32) c->dst.val;
+			break;	/* 64b reg: zero-extend */
+		case 8:
+			*c->src.ptr = c->dst.val;
+			break;
+		}
+		/*
+		 * Write back the memory destination with implicit LOCK
+		 * prefix.
+		 */
+		c->dst.val = c->src.val;
+		c->lock_prefix = 1;
+		break;
+	case 0x88 ... 0x8b:	/* mov */
+		goto mov;
+	case 0x8c: { /* mov r/m, sreg */
+		struct kvm_segment segreg;
+
+		if (c->modrm_reg <= 5)
+			kvm_get_segment(ctxt->vcpu, &segreg, c->modrm_reg);
+		else {
+			printk(KERN_INFO "0x8c: Invalid segreg in modrm byte 0x%02x\n",
+			       c->modrm);
+			goto cannot_emulate;
+		}
+		c->dst.val = segreg.selector;
+		break;
+	}
+	case 0x8d: /* lea r16/r32, m */
+		c->dst.val = c->modrm_ea;
+		break;
+	case 0x8e: { /* mov seg, r/m16 */
+		uint16_t sel;
+		int type_bits;
+		int err;
+
+		sel = c->src.val;
+		if (c->modrm_reg == VCPU_SREG_SS)
+			toggle_interruptibility(ctxt, X86_SHADOW_INT_MOV_SS);
+
+		if (c->modrm_reg <= 5) {
+			type_bits = (c->modrm_reg == 1) ? 9 : 1;
+			err = kvm_load_segment_descriptor(ctxt->vcpu, sel,
+							  type_bits, c->modrm_reg);
+		} else {
+			printk(KERN_INFO "Invalid segreg in modrm byte 0x%02x\n",
+					c->modrm);
+			goto cannot_emulate;
+		}
+
+		if (err < 0)
+			goto cannot_emulate;
+
+		c->dst.type = OP_NONE;  /* Disable writeback. */
+		break;
+	}
+	case 0x8f:		/* pop (sole member of Grp1a) */
+		rc = emulate_grp1a(ctxt, ops);
+		if (rc != 0)
+			goto done;
+		break;
+	case 0x90: /* nop / xchg r8,rax */
+		if (!(c->rex_prefix & 1)) { /* nop */
+			c->dst.type = OP_NONE;
+			break;
+		}
+	case 0x91 ... 0x97: /* xchg reg,rax */
+		c->src.type = c->dst.type = OP_REG;
+		c->src.bytes = c->dst.bytes = c->op_bytes;
+		c->src.ptr = (unsigned long *) &c->regs[VCPU_REGS_RAX];
+		c->src.val = *(c->src.ptr);
+		goto xchg;
+	case 0x9c: /* pushf */
+		c->src.val =  (unsigned long) ctxt->eflags;
+		emulate_push(ctxt);
+		break;
+	case 0x9d: /* popf */
+		c->dst.type = OP_REG;
+		c->dst.ptr = (unsigned long *) &ctxt->eflags;
+		c->dst.bytes = c->op_bytes;
+		goto pop_instruction;
+	case 0xa0 ... 0xa1:	/* mov */
+		c->dst.ptr = (unsigned long *)&c->regs[VCPU_REGS_RAX];
+		c->dst.val = c->src.val;
+		break;
+	case 0xa2 ... 0xa3:	/* mov */
+		c->dst.val = (unsigned long)c->regs[VCPU_REGS_RAX];
+		break;
+	case 0xa4 ... 0xa5:	/* movs */
+		c->dst.type = OP_MEM;
+		c->dst.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
+		c->dst.ptr = (unsigned long *)register_address(c,
+						   es_base(ctxt),
+						   c->regs[VCPU_REGS_RDI]);
+		if ((rc = ops->read_emulated(register_address(c,
+					   seg_override_base(ctxt, c),
+					c->regs[VCPU_REGS_RSI]),
+					&c->dst.val,
+					c->dst.bytes, ctxt->vcpu)) != 0)
+			goto done;
+		register_address_increment(c, &c->regs[VCPU_REGS_RSI],
+				       (ctxt->eflags & EFLG_DF) ? -c->dst.bytes
+							   : c->dst.bytes);
+		register_address_increment(c, &c->regs[VCPU_REGS_RDI],
+				       (ctxt->eflags & EFLG_DF) ? -c->dst.bytes
+							   : c->dst.bytes);
+		break;
+	case 0xa6 ... 0xa7:	/* cmps */
+		c->src.type = OP_NONE; /* Disable writeback. */
+		c->src.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
+		c->src.ptr = (unsigned long *)register_address(c,
+				       seg_override_base(ctxt, c),
+						   c->regs[VCPU_REGS_RSI]);
+		if ((rc = ops->read_emulated((unsigned long)c->src.ptr,
+						&c->src.val,
+						c->src.bytes,
+						ctxt->vcpu)) != 0)
+			goto done;
+
+		c->dst.type = OP_NONE; /* Disable writeback. */
+		c->dst.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
+		c->dst.ptr = (unsigned long *)register_address(c,
+						   es_base(ctxt),
+						   c->regs[VCPU_REGS_RDI]);
+		if ((rc = ops->read_emulated((unsigned long)c->dst.ptr,
+						&c->dst.val,
+						c->dst.bytes,
+						ctxt->vcpu)) != 0)
+			goto done;
+
+		DPRINTF("cmps: mem1=0x%p mem2=0x%p\n", c->src.ptr, c->dst.ptr);
+
+		emulate_2op_SrcV("cmp", c->src, c->dst, ctxt->eflags);
+
+		register_address_increment(c, &c->regs[VCPU_REGS_RSI],
+				       (ctxt->eflags & EFLG_DF) ? -c->src.bytes
+								  : c->src.bytes);
+		register_address_increment(c, &c->regs[VCPU_REGS_RDI],
+				       (ctxt->eflags & EFLG_DF) ? -c->dst.bytes
+								  : c->dst.bytes);
+
+		break;
+	case 0xaa ... 0xab:	/* stos */
+		c->dst.type = OP_MEM;
+		c->dst.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
+		c->dst.ptr = (unsigned long *)register_address(c,
+						   es_base(ctxt),
+						   c->regs[VCPU_REGS_RDI]);
+		c->dst.val = c->regs[VCPU_REGS_RAX];
+		register_address_increment(c, &c->regs[VCPU_REGS_RDI],
+				       (ctxt->eflags & EFLG_DF) ? -c->dst.bytes
+							   : c->dst.bytes);
+		break;
+	case 0xac ... 0xad:	/* lods */
+		c->dst.type = OP_REG;
+		c->dst.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
+		c->dst.ptr = (unsigned long *)&c->regs[VCPU_REGS_RAX];
+		if ((rc = ops->read_emulated(register_address(c,
+						 seg_override_base(ctxt, c),
+						 c->regs[VCPU_REGS_RSI]),
+						 &c->dst.val,
+						 c->dst.bytes,
+						 ctxt->vcpu)) != 0)
+			goto done;
+		register_address_increment(c, &c->regs[VCPU_REGS_RSI],
+				       (ctxt->eflags & EFLG_DF) ? -c->dst.bytes
+							   : c->dst.bytes);
+		break;
+	case 0xae ... 0xaf:	/* scas */
+		DPRINTF("Urk! I don't handle SCAS.\n");
+		goto cannot_emulate;
+	case 0xb0 ... 0xbf: /* mov r, imm */
+		goto mov;
+	case 0xc0 ... 0xc1:
+		emulate_grp2(ctxt);
+		break;
+	case 0xc3: /* ret */
+		c->dst.type = OP_REG;
+		c->dst.ptr = &c->eip;
+		c->dst.bytes = c->op_bytes;
+		goto pop_instruction;
+	case 0xc6 ... 0xc7:	/* mov (sole member of Grp11) */
+	mov:
+		c->dst.val = c->src.val;
+		break;
+	case 0xcb:		/* ret far */
+		rc = emulate_ret_far(ctxt, ops);
+		if (rc)
+			goto done;
+		break;
+	case 0xd0 ... 0xd1:	/* Grp2 */
+		c->src.val = 1;
+		emulate_grp2(ctxt);
+		break;
+	case 0xd2 ... 0xd3:	/* Grp2 */
+		c->src.val = c->regs[VCPU_REGS_RCX];
+		emulate_grp2(ctxt);
+		break;
+	case 0xe4: 	/* inb */
+	case 0xe5: 	/* in */
+		port = c->src.val;
+		io_dir_in = 1;
+		goto do_io;
+	case 0xe6: /* outb */
+	case 0xe7: /* out */
+		port = c->src.val;
+		io_dir_in = 0;
+		goto do_io;
+	case 0xe8: /* call (near) */ {
+		long int rel = c->src.val;
+		c->src.val = (unsigned long) c->eip;
+		jmp_rel(c, rel);
+		emulate_push(ctxt);
+		break;
+	}
+	case 0xe9: /* jmp rel */
+		goto jmp;
+	case 0xea: /* jmp far */
+		if (kvm_load_segment_descriptor(ctxt->vcpu, c->src2.val, 9,
+					VCPU_SREG_CS) < 0) {
+			DPRINTF("jmp far: Failed to load CS descriptor\n");
+			goto cannot_emulate;
+		}
+
+		c->eip = c->src.val;
+		break;
+	case 0xeb:
+	      jmp:		/* jmp rel short */
+		jmp_rel(c, c->src.val);
+		c->dst.type = OP_NONE; /* Disable writeback. */
+		break;
+	case 0xec: /* in al,dx */
+	case 0xed: /* in (e/r)ax,dx */
+		port = c->regs[VCPU_REGS_RDX];
+		io_dir_in = 1;
+		goto do_io;
+	case 0xee: /* out al,dx */
+	case 0xef: /* out (e/r)ax,dx */
+		port = c->regs[VCPU_REGS_RDX];
+		io_dir_in = 0;
+	do_io:	if (kvm_emulate_pio(ctxt->vcpu, NULL, io_dir_in,
+				   (c->d & ByteOp) ? 1 : c->op_bytes,
+				   port) != 0) {
+			c->eip = saved_eip;
+			goto cannot_emulate;
+		}
+		break;
+	case 0xf4:              /* hlt */
+		ctxt->vcpu->arch.halt_request = 1;
+		break;
+	case 0xf5:	/* cmc */
+		/* complement carry flag from eflags reg */
+		ctxt->eflags ^= EFLG_CF;
+		c->dst.type = OP_NONE;	/* Disable writeback. */
+		break;
+	case 0xf6 ... 0xf7:	/* Grp3 */
+		rc = emulate_grp3(ctxt, ops);
+		if (rc != 0)
+			goto done;
+		break;
+	case 0xf8: /* clc */
+		ctxt->eflags &= ~EFLG_CF;
+		c->dst.type = OP_NONE;	/* Disable writeback. */
+		break;
+	case 0xfa: /* cli */
+		ctxt->eflags &= ~X86_EFLAGS_IF;
+		c->dst.type = OP_NONE;	/* Disable writeback. */
+		break;
+	case 0xfb: /* sti */
+		toggle_interruptibility(ctxt, X86_SHADOW_INT_STI);
+		ctxt->eflags |= X86_EFLAGS_IF;
+		c->dst.type = OP_NONE;	/* Disable writeback. */
+		break;
+	case 0xfc: /* cld */
+		ctxt->eflags &= ~EFLG_DF;
+		c->dst.type = OP_NONE;	/* Disable writeback. */
+		break;
+	case 0xfd: /* std */
+		ctxt->eflags |= EFLG_DF;
+		c->dst.type = OP_NONE;	/* Disable writeback. */
+		break;
+	case 0xfe ... 0xff:	/* Grp4/Grp5 */
+		rc = emulate_grp45(ctxt, ops);
+		if (rc != 0)
+			goto done;
+		break;
+	}
+
+writeback:
+	rc = writeback(ctxt, ops);
+	if (rc != 0)
+		goto done;
+
+	/* Commit shadow register state. */
+	memcpy(ctxt->vcpu->arch.regs, c->regs, sizeof c->regs);
+	kvm_rip_write(ctxt->vcpu, c->eip);
+
+done:
+	if (rc == X86EMUL_UNHANDLEABLE) {
+		c->eip = saved_eip;
+		return -1;
+	}
+	return 0;
+
+twobyte_insn:
+	switch (c->b) {
+	case 0x01: /* lgdt, lidt, lmsw */
+		switch (c->modrm_reg) {
+			u16 size;
+			unsigned long address;
+
+		case 0: /* vmcall */
+			if (c->modrm_mod != 3 || c->modrm_rm != 1)
+				goto cannot_emulate;
+
+			rc = kvm_fix_hypercall(ctxt->vcpu);
+			if (rc)
+				goto done;
+
+			/* Let the processor re-execute the fixed hypercall */
+			c->eip = kvm_rip_read(ctxt->vcpu);
+			/* Disable writeback. */
+			c->dst.type = OP_NONE;
+			break;
+		case 2: /* lgdt */
+			rc = read_descriptor(ctxt, ops, c->src.ptr,
+					     &size, &address, c->op_bytes);
+			if (rc)
+				goto done;
+			realmode_lgdt(ctxt->vcpu, size, address);
+			/* Disable writeback. */
+			c->dst.type = OP_NONE;
+			break;
+		case 3: /* lidt/vmmcall */
+			if (c->modrm_mod == 3) {
+				switch (c->modrm_rm) {
+				case 1:
+					rc = kvm_fix_hypercall(ctxt->vcpu);
+					if (rc)
+						goto done;
+					break;
+				default:
+					goto cannot_emulate;
+				}
+			} else {
+				rc = read_descriptor(ctxt, ops, c->src.ptr,
+						     &size, &address,
+						     c->op_bytes);
+				if (rc)
+					goto done;
+				realmode_lidt(ctxt->vcpu, size, address);
+			}
+			/* Disable writeback. */
+			c->dst.type = OP_NONE;
+			break;
+		case 4: /* smsw */
+			c->dst.bytes = 2;
+			c->dst.val = realmode_get_cr(ctxt->vcpu, 0);
+			break;
+		case 6: /* lmsw */
+			realmode_lmsw(ctxt->vcpu, (u16)c->src.val,
+				      &ctxt->eflags);
+			c->dst.type = OP_NONE;
+			break;
+		case 7: /* invlpg*/
+			emulate_invlpg(ctxt->vcpu, memop);
+			/* Disable writeback. */
+			c->dst.type = OP_NONE;
+			break;
+		default:
+			goto cannot_emulate;
+		}
+		break;
+	case 0x05: 		/* syscall */
+		if (emulate_syscall(ctxt) == -1)
+			goto cannot_emulate;
+		else
+			goto writeback;
+		break;
+	case 0x06:
+		emulate_clts(ctxt->vcpu);
+		c->dst.type = OP_NONE;
+		break;
+	case 0x08:		/* invd */
+	case 0x09:		/* wbinvd */
+	case 0x0d:		/* GrpP (prefetch) */
+	case 0x18:		/* Grp16 (prefetch/nop) */
+		c->dst.type = OP_NONE;
+		break;
+	case 0x20: /* mov cr, reg */
+		if (c->modrm_mod != 3)
+			goto cannot_emulate;
+		c->regs[c->modrm_rm] =
+				realmode_get_cr(ctxt->vcpu, c->modrm_reg);
+		c->dst.type = OP_NONE;	/* no writeback */
+		break;
+	case 0x21: /* mov from dr to reg */
+		if (c->modrm_mod != 3)
+			goto cannot_emulate;
+		rc = emulator_get_dr(ctxt, c->modrm_reg, &c->regs[c->modrm_rm]);
+		if (rc)
+			goto cannot_emulate;
+		c->dst.type = OP_NONE;	/* no writeback */
+		break;
+	case 0x22: /* mov reg, cr */
+		if (c->modrm_mod != 3)
+			goto cannot_emulate;
+		realmode_set_cr(ctxt->vcpu,
+				c->modrm_reg, c->modrm_val, &ctxt->eflags);
+		c->dst.type = OP_NONE;
+		break;
+	case 0x23: /* mov from reg to dr */
+		if (c->modrm_mod != 3)
+			goto cannot_emulate;
+		rc = emulator_set_dr(ctxt, c->modrm_reg,
+				     c->regs[c->modrm_rm]);
+		if (rc)
+			goto cannot_emulate;
+		c->dst.type = OP_NONE;	/* no writeback */
+		break;
+	case 0x30:
+		/* wrmsr */
+		msr_data = (u32)c->regs[VCPU_REGS_RAX]
+			| ((u64)c->regs[VCPU_REGS_RDX] << 32);
+		rc = kvm_set_msr(ctxt->vcpu, c->regs[VCPU_REGS_RCX], msr_data);
+		if (rc) {
+			kvm_inject_gp(ctxt->vcpu, 0);
+			c->eip = kvm_rip_read(ctxt->vcpu);
+		}
+		rc = X86EMUL_CONTINUE;
+		c->dst.type = OP_NONE;
+		break;
+	case 0x32:
+		/* rdmsr */
+		rc = kvm_get_msr(ctxt->vcpu, c->regs[VCPU_REGS_RCX], &msr_data);
+		if (rc) {
+			kvm_inject_gp(ctxt->vcpu, 0);
+			c->eip = kvm_rip_read(ctxt->vcpu);
+		} else {
+			c->regs[VCPU_REGS_RAX] = (u32)msr_data;
+			c->regs[VCPU_REGS_RDX] = msr_data >> 32;
+		}
+		rc = X86EMUL_CONTINUE;
+		c->dst.type = OP_NONE;
+		break;
+	case 0x34:		/* sysenter */
+		if (emulate_sysenter(ctxt) == -1)
+			goto cannot_emulate;
+		else
+			goto writeback;
+		break;
+	case 0x35:		/* sysexit */
+		if (emulate_sysexit(ctxt) == -1)
+			goto cannot_emulate;
+		else
+			goto writeback;
+		break;
+	case 0x40 ... 0x4f:	/* cmov */
+		c->dst.val = c->dst.orig_val = c->src.val;
+		if (!test_cc(c->b, ctxt->eflags))
+			c->dst.type = OP_NONE; /* no writeback */
+		break;
+	case 0x80 ... 0x8f: /* jnz rel, etc*/
+		if (test_cc(c->b, ctxt->eflags))
+			jmp_rel(c, c->src.val);
+		c->dst.type = OP_NONE;
+		break;
+	case 0xa3:
+	      bt:		/* bt */
+		c->dst.type = OP_NONE;
+		/* only subword offset */
+		c->src.val &= (c->dst.bytes << 3) - 1;
+		emulate_2op_SrcV_nobyte("bt", c->src, c->dst, ctxt->eflags);
+		break;
+	case 0xa4: /* shld imm8, r, r/m */
+	case 0xa5: /* shld cl, r, r/m */
+		emulate_2op_cl("shld", c->src2, c->src, c->dst, ctxt->eflags);
+		break;
+	case 0xab:
+	      bts:		/* bts */
+		/* only subword offset */
+		c->src.val &= (c->dst.bytes << 3) - 1;
+		emulate_2op_SrcV_nobyte("bts", c->src, c->dst, ctxt->eflags);
+		break;
+	case 0xac: /* shrd imm8, r, r/m */
+	case 0xad: /* shrd cl, r, r/m */
+		emulate_2op_cl("shrd", c->src2, c->src, c->dst, ctxt->eflags);
+		break;
+	case 0xae:              /* clflush */
+		break;
+	case 0xb0 ... 0xb1:	/* cmpxchg */
+		/*
+		 * Save real source value, then compare EAX against
+		 * destination.
+		 */
+		c->src.orig_val = c->src.val;
+		c->src.val = c->regs[VCPU_REGS_RAX];
+		emulate_2op_SrcV("cmp", c->src, c->dst, ctxt->eflags);
+		if (ctxt->eflags & EFLG_ZF) {
+			/* Success: write back to memory. */
+			c->dst.val = c->src.orig_val;
+		} else {
+			/* Failure: write the value we saw to EAX. */
+			c->dst.type = OP_REG;
+			c->dst.ptr = (unsigned long *)&c->regs[VCPU_REGS_RAX];
+		}
+		break;
+	case 0xb3:
+	      btr:		/* btr */
+		/* only subword offset */
+		c->src.val &= (c->dst.bytes << 3) - 1;
+		emulate_2op_SrcV_nobyte("btr", c->src, c->dst, ctxt->eflags);
+		break;
+	case 0xb6 ... 0xb7:	/* movzx */
+		c->dst.bytes = c->op_bytes;
+		c->dst.val = (c->d & ByteOp) ? (u8) c->src.val
+						       : (u16) c->src.val;
+		break;
+	case 0xba:		/* Grp8 */
+		switch (c->modrm_reg & 3) {
+		case 0:
+			goto bt;
+		case 1:
+			goto bts;
+		case 2:
+			goto btr;
+		case 3:
+			goto btc;
+		}
+		break;
+	case 0xbb:
+	      btc:		/* btc */
+		/* only subword offset */
+		c->src.val &= (c->dst.bytes << 3) - 1;
+		emulate_2op_SrcV_nobyte("btc", c->src, c->dst, ctxt->eflags);
+		break;
+	case 0xbe ... 0xbf:	/* movsx */
+		c->dst.bytes = c->op_bytes;
+		c->dst.val = (c->d & ByteOp) ? (s8) c->src.val :
+							(s16) c->src.val;
+		break;
+	case 0xc3:		/* movnti */
+		c->dst.bytes = c->op_bytes;
+		c->dst.val = (c->op_bytes == 4) ? (u32) c->src.val :
+							(u64) c->src.val;
+		break;
+	case 0xc7:		/* Grp9 (cmpxchg8b) */
+		rc = emulate_grp9(ctxt, ops, memop);
+		if (rc != 0)
+			goto done;
+		c->dst.type = OP_NONE;
+		break;
+	}
+	goto writeback;
+
+cannot_emulate:
+	DPRINTF("Cannot emulate %02x\n", c->b);
+	c->eip = saved_eip;
+	return -1;
+}
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 1aa7e6d91d4..c0e942747b0 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -2759,7 +2759,7 @@ int emulate_instruction(struct kvm_vcpu *vcpu,
 	kvm_clear_exception_queue(vcpu);
 	vcpu->arch.mmio_fault_cr2 = cr2;
 	/*
-	 * TODO: fix x86_emulate.c to use guest_read/write_register
+	 * TODO: fix emulate.c to use guest_read/write_register
 	 * instead of direct ->regs accesses, can save hundred cycles
 	 * on Intel for instructions that don't read/change RSP, for
 	 * for example.
diff --git a/arch/x86/kvm/x86_emulate.c b/arch/x86/kvm/x86_emulate.c
deleted file mode 100644
index c6663d46f32..00000000000
--- a/arch/x86/kvm/x86_emulate.c
+++ /dev/null
@@ -1,2392 +0,0 @@
-/******************************************************************************
- * x86_emulate.c
- *
- * Generic x86 (32-bit and 64-bit) instruction decoder and emulator.
- *
- * Copyright (c) 2005 Keir Fraser
- *
- * Linux coding style, mod r/m decoder, segment base fixes, real-mode
- * privileged instructions:
- *
- * Copyright (C) 2006 Qumranet
- *
- *   Avi Kivity <avi@qumranet.com>
- *   Yaniv Kamay <yaniv@qumranet.com>
- *
- * This work is licensed under the terms of the GNU GPL, version 2.  See
- * the COPYING file in the top-level directory.
- *
- * From: xen-unstable 10676:af9809f51f81a3c43f276f00c81a52ef558afda4
- */
-
-#ifndef __KERNEL__
-#include <stdio.h>
-#include <stdint.h>
-#include <public/xen.h>
-#define DPRINTF(_f, _a ...) printf(_f , ## _a)
-#else
-#include <linux/kvm_host.h>
-#include "kvm_cache_regs.h"
-#define DPRINTF(x...) do {} while (0)
-#endif
-#include <linux/module.h>
-#include <asm/kvm_x86_emulate.h>
-
-#include "mmu.h"		/* for is_long_mode() */
-
-/*
- * Opcode effective-address decode tables.
- * Note that we only emulate instructions that have at least one memory
- * operand (excluding implicit stack references). We assume that stack
- * references and instruction fetches will never occur in special memory
- * areas that require emulation. So, for example, 'mov <imm>,<reg>' need
- * not be handled.
- */
-
-/* Operand sizes: 8-bit operands or specified/overridden size. */
-#define ByteOp      (1<<0)	/* 8-bit operands. */
-/* Destination operand type. */
-#define ImplicitOps (1<<1)	/* Implicit in opcode. No generic decode. */
-#define DstReg      (2<<1)	/* Register operand. */
-#define DstMem      (3<<1)	/* Memory operand. */
-#define DstAcc      (4<<1)      /* Destination Accumulator */
-#define DstMask     (7<<1)
-/* Source operand type. */
-#define SrcNone     (0<<4)	/* No source operand. */
-#define SrcImplicit (0<<4)	/* Source operand is implicit in the opcode. */
-#define SrcReg      (1<<4)	/* Register operand. */
-#define SrcMem      (2<<4)	/* Memory operand. */
-#define SrcMem16    (3<<4)	/* Memory operand (16-bit). */
-#define SrcMem32    (4<<4)	/* Memory operand (32-bit). */
-#define SrcImm      (5<<4)	/* Immediate operand. */
-#define SrcImmByte  (6<<4)	/* 8-bit sign-extended immediate operand. */
-#define SrcOne      (7<<4)	/* Implied '1' */
-#define SrcImmUByte (8<<4)      /* 8-bit unsigned immediate operand. */
-#define SrcImmU     (9<<4)      /* Immediate operand, unsigned */
-#define SrcMask     (0xf<<4)
-/* Generic ModRM decode. */
-#define ModRM       (1<<8)
-/* Destination is only written; never read. */
-#define Mov         (1<<9)
-#define BitOp       (1<<10)
-#define MemAbs      (1<<11)      /* Memory operand is absolute displacement */
-#define String      (1<<12)     /* String instruction (rep capable) */
-#define Stack       (1<<13)     /* Stack instruction (push/pop) */
-#define Group       (1<<14)     /* Bits 3:5 of modrm byte extend opcode */
-#define GroupDual   (1<<15)     /* Alternate decoding of mod == 3 */
-#define GroupMask   0xff        /* Group number stored in bits 0:7 */
-/* Source 2 operand type */
-#define Src2None    (0<<29)
-#define Src2CL      (1<<29)
-#define Src2ImmByte (2<<29)
-#define Src2One     (3<<29)
-#define Src2Imm16   (4<<29)
-#define Src2Mask    (7<<29)
-
-enum {
-	Group1_80, Group1_81, Group1_82, Group1_83,
-	Group1A, Group3_Byte, Group3, Group4, Group5, Group7,
-};
-
-static u32 opcode_table[256] = {
-	/* 0x00 - 0x07 */
-	ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
-	ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
-	ByteOp | DstAcc | SrcImm, DstAcc | SrcImm, 0, 0,
-	/* 0x08 - 0x0F */
-	ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
-	ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
-	0, 0, 0, 0,
-	/* 0x10 - 0x17 */
-	ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
-	ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
-	0, 0, 0, 0,
-	/* 0x18 - 0x1F */
-	ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
-	ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
-	0, 0, 0, 0,
-	/* 0x20 - 0x27 */
-	ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
-	ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
-	DstAcc | SrcImmByte, DstAcc | SrcImm, 0, 0,
-	/* 0x28 - 0x2F */
-	ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
-	ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
-	0, 0, 0, 0,
-	/* 0x30 - 0x37 */
-	ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
-	ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
-	0, 0, 0, 0,
-	/* 0x38 - 0x3F */
-	ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
-	ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
-	ByteOp | DstAcc | SrcImm, DstAcc | SrcImm,
-	0, 0,
-	/* 0x40 - 0x47 */
-	DstReg, DstReg, DstReg, DstReg, DstReg, DstReg, DstReg, DstReg,
-	/* 0x48 - 0x4F */
-	DstReg, DstReg, DstReg, DstReg,	DstReg, DstReg, DstReg, DstReg,
-	/* 0x50 - 0x57 */
-	SrcReg | Stack, SrcReg | Stack, SrcReg | Stack, SrcReg | Stack,
-	SrcReg | Stack, SrcReg | Stack, SrcReg | Stack, SrcReg | Stack,
-	/* 0x58 - 0x5F */
-	DstReg | Stack, DstReg | Stack, DstReg | Stack, DstReg | Stack,
-	DstReg | Stack, DstReg | Stack, DstReg | Stack, DstReg | Stack,
-	/* 0x60 - 0x67 */
-	0, 0, 0, DstReg | SrcMem32 | ModRM | Mov /* movsxd (x86/64) */ ,
-	0, 0, 0, 0,
-	/* 0x68 - 0x6F */
-	SrcImm | Mov | Stack, 0, SrcImmByte | Mov | Stack, 0,
-	SrcNone  | ByteOp  | ImplicitOps, SrcNone  | ImplicitOps, /* insb, insw/insd */
-	SrcNone  | ByteOp  | ImplicitOps, SrcNone  | ImplicitOps, /* outsb, outsw/outsd */
-	/* 0x70 - 0x77 */
-	SrcImmByte, SrcImmByte, SrcImmByte, SrcImmByte,
-	SrcImmByte, SrcImmByte, SrcImmByte, SrcImmByte,
-	/* 0x78 - 0x7F */
-	SrcImmByte, SrcImmByte, SrcImmByte, SrcImmByte,
-	SrcImmByte, SrcImmByte, SrcImmByte, SrcImmByte,
-	/* 0x80 - 0x87 */
-	Group | Group1_80, Group | Group1_81,
-	Group | Group1_82, Group | Group1_83,
-	ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
-	ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
-	/* 0x88 - 0x8F */
-	ByteOp | DstMem | SrcReg | ModRM | Mov, DstMem | SrcReg | ModRM | Mov,
-	ByteOp | DstReg | SrcMem | ModRM | Mov, DstReg | SrcMem | ModRM | Mov,
-	DstMem | SrcReg | ModRM | Mov, ModRM | DstReg,
-	DstReg | SrcMem | ModRM | Mov, Group | Group1A,
-	/* 0x90 - 0x97 */
-	DstReg, DstReg, DstReg, DstReg,	DstReg, DstReg, DstReg, DstReg,
-	/* 0x98 - 0x9F */
-	0, 0, SrcImm | Src2Imm16, 0,
-	ImplicitOps | Stack, ImplicitOps | Stack, 0, 0,
-	/* 0xA0 - 0xA7 */
-	ByteOp | DstReg | SrcMem | Mov | MemAbs, DstReg | SrcMem | Mov | MemAbs,
-	ByteOp | DstMem | SrcReg | Mov | MemAbs, DstMem | SrcReg | Mov | MemAbs,
-	ByteOp | ImplicitOps | Mov | String, ImplicitOps | Mov | String,
-	ByteOp | ImplicitOps | String, ImplicitOps | String,
-	/* 0xA8 - 0xAF */
-	0, 0, ByteOp | ImplicitOps | Mov | String, ImplicitOps | Mov | String,
-	ByteOp | ImplicitOps | Mov | String, ImplicitOps | Mov | String,
-	ByteOp | ImplicitOps | String, ImplicitOps | String,
-	/* 0xB0 - 0xB7 */
-	ByteOp | DstReg | SrcImm | Mov, ByteOp | DstReg | SrcImm | Mov,
-	ByteOp | DstReg | SrcImm | Mov, ByteOp | DstReg | SrcImm | Mov,
-	ByteOp | DstReg | SrcImm | Mov, ByteOp | DstReg | SrcImm | Mov,
-	ByteOp | DstReg | SrcImm | Mov, ByteOp | DstReg | SrcImm | Mov,
-	/* 0xB8 - 0xBF */
-	DstReg | SrcImm | Mov, DstReg | SrcImm | Mov,
-	DstReg | SrcImm | Mov, DstReg | SrcImm | Mov,
-	DstReg | SrcImm | Mov, DstReg | SrcImm | Mov,
-	DstReg | SrcImm | Mov, DstReg | SrcImm | Mov,
-	/* 0xC0 - 0xC7 */
-	ByteOp | DstMem | SrcImm | ModRM, DstMem | SrcImmByte | ModRM,
-	0, ImplicitOps | Stack, 0, 0,
-	ByteOp | DstMem | SrcImm | ModRM | Mov, DstMem | SrcImm | ModRM | Mov,
-	/* 0xC8 - 0xCF */
-	0, 0, 0, ImplicitOps | Stack,
-	ImplicitOps, SrcImmByte, ImplicitOps, ImplicitOps,
-	/* 0xD0 - 0xD7 */
-	ByteOp | DstMem | SrcImplicit | ModRM, DstMem | SrcImplicit | ModRM,
-	ByteOp | DstMem | SrcImplicit | ModRM, DstMem | SrcImplicit | ModRM,
-	0, 0, 0, 0,
-	/* 0xD8 - 0xDF */
-	0, 0, 0, 0, 0, 0, 0, 0,
-	/* 0xE0 - 0xE7 */
-	0, 0, 0, 0,
-	ByteOp | SrcImmUByte, SrcImmUByte,
-	ByteOp | SrcImmUByte, SrcImmUByte,
-	/* 0xE8 - 0xEF */
-	SrcImm | Stack, SrcImm | ImplicitOps,
-	SrcImmU | Src2Imm16, SrcImmByte | ImplicitOps,
-	SrcNone | ByteOp | ImplicitOps, SrcNone | ImplicitOps,
-	SrcNone | ByteOp | ImplicitOps, SrcNone | ImplicitOps,
-	/* 0xF0 - 0xF7 */
-	0, 0, 0, 0,
-	ImplicitOps, ImplicitOps, Group | Group3_Byte, Group | Group3,
-	/* 0xF8 - 0xFF */
-	ImplicitOps, 0, ImplicitOps, ImplicitOps,
-	ImplicitOps, ImplicitOps, Group | Group4, Group | Group5,
-};
-
-static u32 twobyte_table[256] = {
-	/* 0x00 - 0x0F */
-	0, Group | GroupDual | Group7, 0, 0, 0, ImplicitOps, ImplicitOps, 0,
-	ImplicitOps, ImplicitOps, 0, 0, 0, ImplicitOps | ModRM, 0, 0,
-	/* 0x10 - 0x1F */
-	0, 0, 0, 0, 0, 0, 0, 0, ImplicitOps | ModRM, 0, 0, 0, 0, 0, 0, 0,
-	/* 0x20 - 0x2F */
-	ModRM | ImplicitOps, ModRM, ModRM | ImplicitOps, ModRM, 0, 0, 0, 0,
-	0, 0, 0, 0, 0, 0, 0, 0,
-	/* 0x30 - 0x3F */
-	ImplicitOps, 0, ImplicitOps, 0,
-	ImplicitOps, ImplicitOps, 0, 0,
-	0, 0, 0, 0, 0, 0, 0, 0,
-	/* 0x40 - 0x47 */
-	DstReg | SrcMem | ModRM | Mov, DstReg | SrcMem | ModRM | Mov,
-	DstReg | SrcMem | ModRM | Mov, DstReg | SrcMem | ModRM | Mov,
-	DstReg | SrcMem | ModRM | Mov, DstReg | SrcMem | ModRM | Mov,
-	DstReg | SrcMem | ModRM | Mov, DstReg | SrcMem | ModRM | Mov,
-	/* 0x48 - 0x4F */
-	DstReg | SrcMem | ModRM | Mov, DstReg | SrcMem | ModRM | Mov,
-	DstReg | SrcMem | ModRM | Mov, DstReg | SrcMem | ModRM | Mov,
-	DstReg | SrcMem | ModRM | Mov, DstReg | SrcMem | ModRM | Mov,
-	DstReg | SrcMem | ModRM | Mov, DstReg | SrcMem | ModRM | Mov,
-	/* 0x50 - 0x5F */
-	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-	/* 0x60 - 0x6F */
-	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-	/* 0x70 - 0x7F */
-	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-	/* 0x80 - 0x8F */
-	SrcImm, SrcImm, SrcImm, SrcImm, SrcImm, SrcImm, SrcImm, SrcImm,
-	SrcImm, SrcImm, SrcImm, SrcImm, SrcImm, SrcImm, SrcImm, SrcImm,
-	/* 0x90 - 0x9F */
-	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-	/* 0xA0 - 0xA7 */
-	0, 0, 0, DstMem | SrcReg | ModRM | BitOp,
-	DstMem | SrcReg | Src2ImmByte | ModRM,
-	DstMem | SrcReg | Src2CL | ModRM, 0, 0,
-	/* 0xA8 - 0xAF */
-	0, 0, 0, DstMem | SrcReg | ModRM | BitOp,
-	DstMem | SrcReg | Src2ImmByte | ModRM,
-	DstMem | SrcReg | Src2CL | ModRM,
-	ModRM, 0,
-	/* 0xB0 - 0xB7 */
-	ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM, 0,
-	    DstMem | SrcReg | ModRM | BitOp,
-	0, 0, ByteOp | DstReg | SrcMem | ModRM | Mov,
-	    DstReg | SrcMem16 | ModRM | Mov,
-	/* 0xB8 - 0xBF */
-	0, 0, DstMem | SrcImmByte | ModRM, DstMem | SrcReg | ModRM | BitOp,
-	0, 0, ByteOp | DstReg | SrcMem | ModRM | Mov,
-	    DstReg | SrcMem16 | ModRM | Mov,
-	/* 0xC0 - 0xCF */
-	0, 0, 0, DstMem | SrcReg | ModRM | Mov, 0, 0, 0, ImplicitOps | ModRM,
-	0, 0, 0, 0, 0, 0, 0, 0,
-	/* 0xD0 - 0xDF */
-	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-	/* 0xE0 - 0xEF */
-	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-	/* 0xF0 - 0xFF */
-	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
-};
-
-static u32 group_table[] = {
-	[Group1_80*8] =
-	ByteOp | DstMem | SrcImm | ModRM, ByteOp | DstMem | SrcImm | ModRM,
-	ByteOp | DstMem | SrcImm | ModRM, ByteOp | DstMem | SrcImm | ModRM,
-	ByteOp | DstMem | SrcImm | ModRM, ByteOp | DstMem | SrcImm | ModRM,
-	ByteOp | DstMem | SrcImm | ModRM, ByteOp | DstMem | SrcImm | ModRM,
-	[Group1_81*8] =
-	DstMem | SrcImm | ModRM, DstMem | SrcImm | ModRM,
-	DstMem | SrcImm | ModRM, DstMem | SrcImm | ModRM,
-	DstMem | SrcImm | ModRM, DstMem | SrcImm | ModRM,
-	DstMem | SrcImm | ModRM, DstMem | SrcImm | ModRM,
-	[Group1_82*8] =
-	ByteOp | DstMem | SrcImm | ModRM, ByteOp | DstMem | SrcImm | ModRM,
-	ByteOp | DstMem | SrcImm | ModRM, ByteOp | DstMem | SrcImm | ModRM,
-	ByteOp | DstMem | SrcImm | ModRM, ByteOp | DstMem | SrcImm | ModRM,
-	ByteOp | DstMem | SrcImm | ModRM, ByteOp | DstMem | SrcImm | ModRM,
-	[Group1_83*8] =
-	DstMem | SrcImmByte | ModRM, DstMem | SrcImmByte | ModRM,
-	DstMem | SrcImmByte | ModRM, DstMem | SrcImmByte | ModRM,
-	DstMem | SrcImmByte | ModRM, DstMem | SrcImmByte | ModRM,
-	DstMem | SrcImmByte | ModRM, DstMem | SrcImmByte | ModRM,
-	[Group1A*8] =
-	DstMem | SrcNone | ModRM | Mov | Stack, 0, 0, 0, 0, 0, 0, 0,
-	[Group3_Byte*8] =
-	ByteOp | SrcImm | DstMem | ModRM, 0,
-	ByteOp | DstMem | SrcNone | ModRM, ByteOp | DstMem | SrcNone | ModRM,
-	0, 0, 0, 0,
-	[Group3*8] =
-	DstMem | SrcImm | ModRM, 0,
-	DstMem | SrcNone | ModRM, DstMem | SrcNone | ModRM,
-	0, 0, 0, 0,
-	[Group4*8] =
-	ByteOp | DstMem | SrcNone | ModRM, ByteOp | DstMem | SrcNone | ModRM,
-	0, 0, 0, 0, 0, 0,
-	[Group5*8] =
-	DstMem | SrcNone | ModRM, DstMem | SrcNone | ModRM,
-	SrcMem | ModRM | Stack, 0,
-	SrcMem | ModRM | Stack, 0, SrcMem | ModRM | Stack, 0,
-	[Group7*8] =
-	0, 0, ModRM | SrcMem, ModRM | SrcMem,
-	SrcNone | ModRM | DstMem | Mov, 0,
-	SrcMem16 | ModRM | Mov, SrcMem | ModRM | ByteOp,
-};
-
-static u32 group2_table[] = {
-	[Group7*8] =
-	SrcNone | ModRM, 0, 0, SrcNone | ModRM,
-	SrcNone | ModRM | DstMem | Mov, 0,
-	SrcMem16 | ModRM | Mov, 0,
-};
-
-/* EFLAGS bit definitions. */
-#define EFLG_VM (1<<17)
-#define EFLG_RF (1<<16)
-#define EFLG_OF (1<<11)
-#define EFLG_DF (1<<10)
-#define EFLG_IF (1<<9)
-#define EFLG_SF (1<<7)
-#define EFLG_ZF (1<<6)
-#define EFLG_AF (1<<4)
-#define EFLG_PF (1<<2)
-#define EFLG_CF (1<<0)
-
-/*
- * Instruction emulation:
- * Most instructions are emulated directly via a fragment of inline assembly
- * code. This allows us to save/restore EFLAGS and thus very easily pick up
- * any modified flags.
- */
-
-#if defined(CONFIG_X86_64)
-#define _LO32 "k"		/* force 32-bit operand */
-#define _STK  "%%rsp"		/* stack pointer */
-#elif defined(__i386__)
-#define _LO32 ""		/* force 32-bit operand */
-#define _STK  "%%esp"		/* stack pointer */
-#endif
-
-/*
- * These EFLAGS bits are restored from saved value during emulation, and
- * any changes are written back to the saved value after emulation.
- */
-#define EFLAGS_MASK (EFLG_OF|EFLG_SF|EFLG_ZF|EFLG_AF|EFLG_PF|EFLG_CF)
-
-/* Before executing instruction: restore necessary bits in EFLAGS. */
-#define _PRE_EFLAGS(_sav, _msk, _tmp)					\
-	/* EFLAGS = (_sav & _msk) | (EFLAGS & ~_msk); _sav &= ~_msk; */ \
-	"movl %"_sav",%"_LO32 _tmp"; "                                  \
-	"push %"_tmp"; "                                                \
-	"push %"_tmp"; "                                                \
-	"movl %"_msk",%"_LO32 _tmp"; "                                  \
-	"andl %"_LO32 _tmp",("_STK"); "                                 \
-	"pushf; "                                                       \
-	"notl %"_LO32 _tmp"; "                                          \
-	"andl %"_LO32 _tmp",("_STK"); "                                 \
-	"andl %"_LO32 _tmp","__stringify(BITS_PER_LONG/4)"("_STK"); "	\
-	"pop  %"_tmp"; "                                                \
-	"orl  %"_LO32 _tmp",("_STK"); "                                 \
-	"popf; "                                                        \
-	"pop  %"_sav"; "
-
-/* After executing instruction: write-back necessary bits in EFLAGS. */
-#define _POST_EFLAGS(_sav, _msk, _tmp) \
-	/* _sav |= EFLAGS & _msk; */		\
-	"pushf; "				\
-	"pop  %"_tmp"; "			\
-	"andl %"_msk",%"_LO32 _tmp"; "		\
-	"orl  %"_LO32 _tmp",%"_sav"; "
-
-#ifdef CONFIG_X86_64
-#define ON64(x) x
-#else
-#define ON64(x)
-#endif
-
-#define ____emulate_2op(_op, _src, _dst, _eflags, _x, _y, _suffix)	\
-	do {								\
-		__asm__ __volatile__ (					\
-			_PRE_EFLAGS("0", "4", "2")			\
-			_op _suffix " %"_x"3,%1; "			\
-			_POST_EFLAGS("0", "4", "2")			\
-			: "=m" (_eflags), "=m" ((_dst).val),		\
-			  "=&r" (_tmp)					\
-			: _y ((_src).val), "i" (EFLAGS_MASK));		\
-	} while (0)
-
-
-/* Raw emulation: instruction has two explicit operands. */
-#define __emulate_2op_nobyte(_op,_src,_dst,_eflags,_wx,_wy,_lx,_ly,_qx,_qy) \
-	do {								\
-		unsigned long _tmp;					\
-									\
-		switch ((_dst).bytes) {					\
-		case 2:							\
-			____emulate_2op(_op,_src,_dst,_eflags,_wx,_wy,"w"); \
-			break;						\
-		case 4:							\
-			____emulate_2op(_op,_src,_dst,_eflags,_lx,_ly,"l"); \
-			break;						\
-		case 8:							\
-			ON64(____emulate_2op(_op,_src,_dst,_eflags,_qx,_qy,"q")); \
-			break;						\
-		}							\
-	} while (0)
-
-#define __emulate_2op(_op,_src,_dst,_eflags,_bx,_by,_wx,_wy,_lx,_ly,_qx,_qy) \
-	do {								     \
-		unsigned long _tmp;					     \
-		switch ((_dst).bytes) {				             \
-		case 1:							     \
-			____emulate_2op(_op,_src,_dst,_eflags,_bx,_by,"b");  \
-			break;						     \
-		default:						     \
-			__emulate_2op_nobyte(_op, _src, _dst, _eflags,	     \
-					     _wx, _wy, _lx, _ly, _qx, _qy);  \
-			break;						     \
-		}							     \
-	} while (0)
-
-/* Source operand is byte-sized and may be restricted to just %cl. */
-#define emulate_2op_SrcB(_op, _src, _dst, _eflags)                      \
-	__emulate_2op(_op, _src, _dst, _eflags,				\
-		      "b", "c", "b", "c", "b", "c", "b", "c")
-
-/* Source operand is byte, word, long or quad sized. */
-#define emulate_2op_SrcV(_op, _src, _dst, _eflags)                      \
-	__emulate_2op(_op, _src, _dst, _eflags,				\
-		      "b", "q", "w", "r", _LO32, "r", "", "r")
-
-/* Source operand is word, long or quad sized. */
-#define emulate_2op_SrcV_nobyte(_op, _src, _dst, _eflags)               \
-	__emulate_2op_nobyte(_op, _src, _dst, _eflags,			\
-			     "w", "r", _LO32, "r", "", "r")
-
-/* Instruction has three operands and one operand is stored in ECX register */
-#define __emulate_2op_cl(_op, _cl, _src, _dst, _eflags, _suffix, _type) 	\
-	do {									\
-		unsigned long _tmp;						\
-		_type _clv  = (_cl).val;  					\
-		_type _srcv = (_src).val;    					\
-		_type _dstv = (_dst).val;					\
-										\
-		__asm__ __volatile__ (						\
-			_PRE_EFLAGS("0", "5", "2")				\
-			_op _suffix " %4,%1 \n"					\
-			_POST_EFLAGS("0", "5", "2")				\
-			: "=m" (_eflags), "+r" (_dstv), "=&r" (_tmp)		\
-			: "c" (_clv) , "r" (_srcv), "i" (EFLAGS_MASK)		\
-			); 							\
-										\
-		(_cl).val  = (unsigned long) _clv;				\
-		(_src).val = (unsigned long) _srcv;				\
-		(_dst).val = (unsigned long) _dstv;				\
-	} while (0)
-
-#define emulate_2op_cl(_op, _cl, _src, _dst, _eflags)				\
-	do {									\
-		switch ((_dst).bytes) {						\
-		case 2:								\
-			__emulate_2op_cl(_op, _cl, _src, _dst, _eflags,  	\
-						"w", unsigned short);         	\
-			break;							\
-		case 4: 							\
-			__emulate_2op_cl(_op, _cl, _src, _dst, _eflags,  	\
-						"l", unsigned int);           	\
-			break;							\
-		case 8:								\
-			ON64(__emulate_2op_cl(_op, _cl, _src, _dst, _eflags,	\
-						"q", unsigned long));  		\
-			break;							\
-		}								\
-	} while (0)
-
-#define __emulate_1op(_op, _dst, _eflags, _suffix)			\
-	do {								\
-		unsigned long _tmp;					\
-									\
-		__asm__ __volatile__ (					\
-			_PRE_EFLAGS("0", "3", "2")			\
-			_op _suffix " %1; "				\
-			_POST_EFLAGS("0", "3", "2")			\
-			: "=m" (_eflags), "+m" ((_dst).val),		\
-			  "=&r" (_tmp)					\
-			: "i" (EFLAGS_MASK));				\
-	} while (0)
-
-/* Instruction has only one explicit operand (no source operand). */
-#define emulate_1op(_op, _dst, _eflags)                                    \
-	do {								\
-		switch ((_dst).bytes) {				        \
-		case 1:	__emulate_1op(_op, _dst, _eflags, "b"); break;	\
-		case 2:	__emulate_1op(_op, _dst, _eflags, "w"); break;	\
-		case 4:	__emulate_1op(_op, _dst, _eflags, "l"); break;	\
-		case 8:	ON64(__emulate_1op(_op, _dst, _eflags, "q")); break; \
-		}							\
-	} while (0)
-
-/* Fetch next part of the instruction being emulated. */
-#define insn_fetch(_type, _size, _eip)                                  \
-({	unsigned long _x;						\
-	rc = do_insn_fetch(ctxt, ops, (_eip), &_x, (_size));		\
-	if (rc != 0)							\
-		goto done;						\
-	(_eip) += (_size);						\
-	(_type)_x;							\
-})
-
-static inline unsigned long ad_mask(struct decode_cache *c)
-{
-	return (1UL << (c->ad_bytes << 3)) - 1;
-}
-
-/* Access/update address held in a register, based on addressing mode. */
-static inline unsigned long
-address_mask(struct decode_cache *c, unsigned long reg)
-{
-	if (c->ad_bytes == sizeof(unsigned long))
-		return reg;
-	else
-		return reg & ad_mask(c);
-}
-
-static inline unsigned long
-register_address(struct decode_cache *c, unsigned long base, unsigned long reg)
-{
-	return base + address_mask(c, reg);
-}
-
-static inline void
-register_address_increment(struct decode_cache *c, unsigned long *reg, int inc)
-{
-	if (c->ad_bytes == sizeof(unsigned long))
-		*reg += inc;
-	else
-		*reg = (*reg & ~ad_mask(c)) | ((*reg + inc) & ad_mask(c));
-}
-
-static inline void jmp_rel(struct decode_cache *c, int rel)
-{
-	register_address_increment(c, &c->eip, rel);
-}
-
-static void set_seg_override(struct decode_cache *c, int seg)
-{
-	c->has_seg_override = true;
-	c->seg_override = seg;
-}
-
-static unsigned long seg_base(struct x86_emulate_ctxt *ctxt, int seg)
-{
-	if (ctxt->mode == X86EMUL_MODE_PROT64 && seg < VCPU_SREG_FS)
-		return 0;
-
-	return kvm_x86_ops->get_segment_base(ctxt->vcpu, seg);
-}
-
-static unsigned long seg_override_base(struct x86_emulate_ctxt *ctxt,
-				       struct decode_cache *c)
-{
-	if (!c->has_seg_override)
-		return 0;
-
-	return seg_base(ctxt, c->seg_override);
-}
-
-static unsigned long es_base(struct x86_emulate_ctxt *ctxt)
-{
-	return seg_base(ctxt, VCPU_SREG_ES);
-}
-
-static unsigned long ss_base(struct x86_emulate_ctxt *ctxt)
-{
-	return seg_base(ctxt, VCPU_SREG_SS);
-}
-
-static int do_fetch_insn_byte(struct x86_emulate_ctxt *ctxt,
-			      struct x86_emulate_ops *ops,
-			      unsigned long linear, u8 *dest)
-{
-	struct fetch_cache *fc = &ctxt->decode.fetch;
-	int rc;
-	int size;
-
-	if (linear < fc->start || linear >= fc->end) {
-		size = min(15UL, PAGE_SIZE - offset_in_page(linear));
-		rc = ops->read_std(linear, fc->data, size, ctxt->vcpu);
-		if (rc)
-			return rc;
-		fc->start = linear;
-		fc->end = linear + size;
-	}
-	*dest = fc->data[linear - fc->start];
-	return 0;
-}
-
-static int do_insn_fetch(struct x86_emulate_ctxt *ctxt,
-			 struct x86_emulate_ops *ops,
-			 unsigned long eip, void *dest, unsigned size)
-{
-	int rc = 0;
-
-	eip += ctxt->cs_base;
-	while (size--) {
-		rc = do_fetch_insn_byte(ctxt, ops, eip++, dest++);
-		if (rc)
-			return rc;
-	}
-	return 0;
-}
-
-/*
- * Given the 'reg' portion of a ModRM byte, and a register block, return a
- * pointer into the block that addresses the relevant register.
- * @highbyte_regs specifies whether to decode AH,CH,DH,BH.
- */
-static void *decode_register(u8 modrm_reg, unsigned long *regs,
-			     int highbyte_regs)
-{
-	void *p;
-
-	p = &regs[modrm_reg];
-	if (highbyte_regs && modrm_reg >= 4 && modrm_reg < 8)
-		p = (unsigned char *)&regs[modrm_reg & 3] + 1;
-	return p;
-}
-
-static int read_descriptor(struct x86_emulate_ctxt *ctxt,
-			   struct x86_emulate_ops *ops,
-			   void *ptr,
-			   u16 *size, unsigned long *address, int op_bytes)
-{
-	int rc;
-
-	if (op_bytes == 2)
-		op_bytes = 3;
-	*address = 0;
-	rc = ops->read_std((unsigned long)ptr, (unsigned long *)size, 2,
-			   ctxt->vcpu);
-	if (rc)
-		return rc;
-	rc = ops->read_std((unsigned long)ptr + 2, address, op_bytes,
-			   ctxt->vcpu);
-	return rc;
-}
-
-static int test_cc(unsigned int condition, unsigned int flags)
-{
-	int rc = 0;
-
-	switch ((condition & 15) >> 1) {
-	case 0: /* o */
-		rc |= (flags & EFLG_OF);
-		break;
-	case 1: /* b/c/nae */
-		rc |= (flags & EFLG_CF);
-		break;
-	case 2: /* z/e */
-		rc |= (flags & EFLG_ZF);
-		break;
-	case 3: /* be/na */
-		rc |= (flags & (EFLG_CF|EFLG_ZF));
-		break;
-	case 4: /* s */
-		rc |= (flags & EFLG_SF);
-		break;
-	case 5: /* p/pe */
-		rc |= (flags & EFLG_PF);
-		break;
-	case 7: /* le/ng */
-		rc |= (flags & EFLG_ZF);
-		/* fall through */
-	case 6: /* l/nge */
-		rc |= (!(flags & EFLG_SF) != !(flags & EFLG_OF));
-		break;
-	}
-
-	/* Odd condition identifiers (lsb == 1) have inverted sense. */
-	return (!!rc ^ (condition & 1));
-}
-
-static void decode_register_operand(struct operand *op,
-				    struct decode_cache *c,
-				    int inhibit_bytereg)
-{
-	unsigned reg = c->modrm_reg;
-	int highbyte_regs = c->rex_prefix == 0;
-
-	if (!(c->d & ModRM))
-		reg = (c->b & 7) | ((c->rex_prefix & 1) << 3);
-	op->type = OP_REG;
-	if ((c->d & ByteOp) && !inhibit_bytereg) {
-		op->ptr = decode_register(reg, c->regs, highbyte_regs);
-		op->val = *(u8 *)op->ptr;
-		op->bytes = 1;
-	} else {
-		op->ptr = decode_register(reg, c->regs, 0);
-		op->bytes = c->op_bytes;
-		switch (op->bytes) {
-		case 2:
-			op->val = *(u16 *)op->ptr;
-			break;
-		case 4:
-			op->val = *(u32 *)op->ptr;
-			break;
-		case 8:
-			op->val = *(u64 *) op->ptr;
-			break;
-		}
-	}
-	op->orig_val = op->val;
-}
-
-static int decode_modrm(struct x86_emulate_ctxt *ctxt,
-			struct x86_emulate_ops *ops)
-{
-	struct decode_cache *c = &ctxt->decode;
-	u8 sib;
-	int index_reg = 0, base_reg = 0, scale;
-	int rc = 0;
-
-	if (c->rex_prefix) {
-		c->modrm_reg = (c->rex_prefix & 4) << 1;	/* REX.R */
-		index_reg = (c->rex_prefix & 2) << 2; /* REX.X */
-		c->modrm_rm = base_reg = (c->rex_prefix & 1) << 3; /* REG.B */
-	}
-
-	c->modrm = insn_fetch(u8, 1, c->eip);
-	c->modrm_mod |= (c->modrm & 0xc0) >> 6;
-	c->modrm_reg |= (c->modrm & 0x38) >> 3;
-	c->modrm_rm |= (c->modrm & 0x07);
-	c->modrm_ea = 0;
-	c->use_modrm_ea = 1;
-
-	if (c->modrm_mod == 3) {
-		c->modrm_ptr = decode_register(c->modrm_rm,
-					       c->regs, c->d & ByteOp);
-		c->modrm_val = *(unsigned long *)c->modrm_ptr;
-		return rc;
-	}
-
-	if (c->ad_bytes == 2) {
-		unsigned bx = c->regs[VCPU_REGS_RBX];
-		unsigned bp = c->regs[VCPU_REGS_RBP];
-		unsigned si = c->regs[VCPU_REGS_RSI];
-		unsigned di = c->regs[VCPU_REGS_RDI];
-
-		/* 16-bit ModR/M decode. */
-		switch (c->modrm_mod) {
-		case 0:
-			if (c->modrm_rm == 6)
-				c->modrm_ea += insn_fetch(u16, 2, c->eip);
-			break;
-		case 1:
-			c->modrm_ea += insn_fetch(s8, 1, c->eip);
-			break;
-		case 2:
-			c->modrm_ea += insn_fetch(u16, 2, c->eip);
-			break;
-		}
-		switch (c->modrm_rm) {
-		case 0:
-			c->modrm_ea += bx + si;
-			break;
-		case 1:
-			c->modrm_ea += bx + di;
-			break;
-		case 2:
-			c->modrm_ea += bp + si;
-			break;
-		case 3:
-			c->modrm_ea += bp + di;
-			break;
-		case 4:
-			c->modrm_ea += si;
-			break;
-		case 5:
-			c->modrm_ea += di;
-			break;
-		case 6:
-			if (c->modrm_mod != 0)
-				c->modrm_ea += bp;
-			break;
-		case 7:
-			c->modrm_ea += bx;
-			break;
-		}
-		if (c->modrm_rm == 2 || c->modrm_rm == 3 ||
-		    (c->modrm_rm == 6 && c->modrm_mod != 0))
-			if (!c->has_seg_override)
-				set_seg_override(c, VCPU_SREG_SS);
-		c->modrm_ea = (u16)c->modrm_ea;
-	} else {
-		/* 32/64-bit ModR/M decode. */
-		if ((c->modrm_rm & 7) == 4) {
-			sib = insn_fetch(u8, 1, c->eip);
-			index_reg |= (sib >> 3) & 7;
-			base_reg |= sib & 7;
-			scale = sib >> 6;
-
-			if ((base_reg & 7) == 5 && c->modrm_mod == 0)
-				c->modrm_ea += insn_fetch(s32, 4, c->eip);
-			else
-				c->modrm_ea += c->regs[base_reg];
-			if (index_reg != 4)
-				c->modrm_ea += c->regs[index_reg] << scale;
-		} else if ((c->modrm_rm & 7) == 5 && c->modrm_mod == 0) {
-			if (ctxt->mode == X86EMUL_MODE_PROT64)
-				c->rip_relative = 1;
-		} else
-			c->modrm_ea += c->regs[c->modrm_rm];
-		switch (c->modrm_mod) {
-		case 0:
-			if (c->modrm_rm == 5)
-				c->modrm_ea += insn_fetch(s32, 4, c->eip);
-			break;
-		case 1:
-			c->modrm_ea += insn_fetch(s8, 1, c->eip);
-			break;
-		case 2:
-			c->modrm_ea += insn_fetch(s32, 4, c->eip);
-			break;
-		}
-	}
-done:
-	return rc;
-}
-
-static int decode_abs(struct x86_emulate_ctxt *ctxt,
-		      struct x86_emulate_ops *ops)
-{
-	struct decode_cache *c = &ctxt->decode;
-	int rc = 0;
-
-	switch (c->ad_bytes) {
-	case 2:
-		c->modrm_ea = insn_fetch(u16, 2, c->eip);
-		break;
-	case 4:
-		c->modrm_ea = insn_fetch(u32, 4, c->eip);
-		break;
-	case 8:
-		c->modrm_ea = insn_fetch(u64, 8, c->eip);
-		break;
-	}
-done:
-	return rc;
-}
-
-int
-x86_decode_insn(struct x86_emulate_ctxt *ctxt, struct x86_emulate_ops *ops)
-{
-	struct decode_cache *c = &ctxt->decode;
-	int rc = 0;
-	int mode = ctxt->mode;
-	int def_op_bytes, def_ad_bytes, group;
-
-	/* Shadow copy of register state. Committed on successful emulation. */
-
-	memset(c, 0, sizeof(struct decode_cache));
-	c->eip = kvm_rip_read(ctxt->vcpu);
-	ctxt->cs_base = seg_base(ctxt, VCPU_SREG_CS);
-	memcpy(c->regs, ctxt->vcpu->arch.regs, sizeof c->regs);
-
-	switch (mode) {
-	case X86EMUL_MODE_REAL:
-	case X86EMUL_MODE_PROT16:
-		def_op_bytes = def_ad_bytes = 2;
-		break;
-	case X86EMUL_MODE_PROT32:
-		def_op_bytes = def_ad_bytes = 4;
-		break;
-#ifdef CONFIG_X86_64
-	case X86EMUL_MODE_PROT64:
-		def_op_bytes = 4;
-		def_ad_bytes = 8;
-		break;
-#endif
-	default:
-		return -1;
-	}
-
-	c->op_bytes = def_op_bytes;
-	c->ad_bytes = def_ad_bytes;
-
-	/* Legacy prefixes. */
-	for (;;) {
-		switch (c->b = insn_fetch(u8, 1, c->eip)) {
-		case 0x66:	/* operand-size override */
-			/* switch between 2/4 bytes */
-			c->op_bytes = def_op_bytes ^ 6;
-			break;
-		case 0x67:	/* address-size override */
-			if (mode == X86EMUL_MODE_PROT64)
-				/* switch between 4/8 bytes */
-				c->ad_bytes = def_ad_bytes ^ 12;
-			else
-				/* switch between 2/4 bytes */
-				c->ad_bytes = def_ad_bytes ^ 6;
-			break;
-		case 0x26:	/* ES override */
-		case 0x2e:	/* CS override */
-		case 0x36:	/* SS override */
-		case 0x3e:	/* DS override */
-			set_seg_override(c, (c->b >> 3) & 3);
-			break;
-		case 0x64:	/* FS override */
-		case 0x65:	/* GS override */
-			set_seg_override(c, c->b & 7);
-			break;
-		case 0x40 ... 0x4f: /* REX */
-			if (mode != X86EMUL_MODE_PROT64)
-				goto done_prefixes;
-			c->rex_prefix = c->b;
-			continue;
-		case 0xf0:	/* LOCK */
-			c->lock_prefix = 1;
-			break;
-		case 0xf2:	/* REPNE/REPNZ */
-			c->rep_prefix = REPNE_PREFIX;
-			break;
-		case 0xf3:	/* REP/REPE/REPZ */
-			c->rep_prefix = REPE_PREFIX;
-			break;
-		default:
-			goto done_prefixes;
-		}
-
-		/* Any legacy prefix after a REX prefix nullifies its effect. */
-
-		c->rex_prefix = 0;
-	}
-
-done_prefixes:
-
-	/* REX prefix. */
-	if (c->rex_prefix)
-		if (c->rex_prefix & 8)
-			c->op_bytes = 8;	/* REX.W */
-
-	/* Opcode byte(s). */
-	c->d = opcode_table[c->b];
-	if (c->d == 0) {
-		/* Two-byte opcode? */
-		if (c->b == 0x0f) {
-			c->twobyte = 1;
-			c->b = insn_fetch(u8, 1, c->eip);
-			c->d = twobyte_table[c->b];
-		}
-	}
-
-	if (c->d & Group) {
-		group = c->d & GroupMask;
-		c->modrm = insn_fetch(u8, 1, c->eip);
-		--c->eip;
-
-		group = (group << 3) + ((c->modrm >> 3) & 7);
-		if ((c->d & GroupDual) && (c->modrm >> 6) == 3)
-			c->d = group2_table[group];
-		else
-			c->d = group_table[group];
-	}
-
-	/* Unrecognised? */
-	if (c->d == 0) {
-		DPRINTF("Cannot emulate %02x\n", c->b);
-		return -1;
-	}
-
-	if (mode == X86EMUL_MODE_PROT64 && (c->d & Stack))
-		c->op_bytes = 8;
-
-	/* ModRM and SIB bytes. */
-	if (c->d & ModRM)
-		rc = decode_modrm(ctxt, ops);
-	else if (c->d & MemAbs)
-		rc = decode_abs(ctxt, ops);
-	if (rc)
-		goto done;
-
-	if (!c->has_seg_override)
-		set_seg_override(c, VCPU_SREG_DS);
-
-	if (!(!c->twobyte && c->b == 0x8d))
-		c->modrm_ea += seg_override_base(ctxt, c);
-
-	if (c->ad_bytes != 8)
-		c->modrm_ea = (u32)c->modrm_ea;
-	/*
-	 * Decode and fetch the source operand: register, memory
-	 * or immediate.
-	 */
-	switch (c->d & SrcMask) {
-	case SrcNone:
-		break;
-	case SrcReg:
-		decode_register_operand(&c->src, c, 0);
-		break;
-	case SrcMem16:
-		c->src.bytes = 2;
-		goto srcmem_common;
-	case SrcMem32:
-		c->src.bytes = 4;
-		goto srcmem_common;
-	case SrcMem:
-		c->src.bytes = (c->d & ByteOp) ? 1 :
-							   c->op_bytes;
-		/* Don't fetch the address for invlpg: it could be unmapped. */
-		if (c->twobyte && c->b == 0x01 && c->modrm_reg == 7)
-			break;
-	srcmem_common:
-		/*
-		 * For instructions with a ModR/M byte, switch to register
-		 * access if Mod = 3.
-		 */
-		if ((c->d & ModRM) && c->modrm_mod == 3) {
-			c->src.type = OP_REG;
-			c->src.val = c->modrm_val;
-			c->src.ptr = c->modrm_ptr;
-			break;
-		}
-		c->src.type = OP_MEM;
-		break;
-	case SrcImm:
-	case SrcImmU:
-		c->src.type = OP_IMM;
-		c->src.ptr = (unsigned long *)c->eip;
-		c->src.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
-		if (c->src.bytes == 8)
-			c->src.bytes = 4;
-		/* NB. Immediates are sign-extended as necessary. */
-		switch (c->src.bytes) {
-		case 1:
-			c->src.val = insn_fetch(s8, 1, c->eip);
-			break;
-		case 2:
-			c->src.val = insn_fetch(s16, 2, c->eip);
-			break;
-		case 4:
-			c->src.val = insn_fetch(s32, 4, c->eip);
-			break;
-		}
-		if ((c->d & SrcMask) == SrcImmU) {
-			switch (c->src.bytes) {
-			case 1:
-				c->src.val &= 0xff;
-				break;
-			case 2:
-				c->src.val &= 0xffff;
-				break;
-			case 4:
-				c->src.val &= 0xffffffff;
-				break;
-			}
-		}
-		break;
-	case SrcImmByte:
-	case SrcImmUByte:
-		c->src.type = OP_IMM;
-		c->src.ptr = (unsigned long *)c->eip;
-		c->src.bytes = 1;
-		if ((c->d & SrcMask) == SrcImmByte)
-			c->src.val = insn_fetch(s8, 1, c->eip);
-		else
-			c->src.val = insn_fetch(u8, 1, c->eip);
-		break;
-	case SrcOne:
-		c->src.bytes = 1;
-		c->src.val = 1;
-		break;
-	}
-
-	/*
-	 * Decode and fetch the second source operand: register, memory
-	 * or immediate.
-	 */
-	switch (c->d & Src2Mask) {
-	case Src2None:
-		break;
-	case Src2CL:
-		c->src2.bytes = 1;
-		c->src2.val = c->regs[VCPU_REGS_RCX] & 0x8;
-		break;
-	case Src2ImmByte:
-		c->src2.type = OP_IMM;
-		c->src2.ptr = (unsigned long *)c->eip;
-		c->src2.bytes = 1;
-		c->src2.val = insn_fetch(u8, 1, c->eip);
-		break;
-	case Src2Imm16:
-		c->src2.type = OP_IMM;
-		c->src2.ptr = (unsigned long *)c->eip;
-		c->src2.bytes = 2;
-		c->src2.val = insn_fetch(u16, 2, c->eip);
-		break;
-	case Src2One:
-		c->src2.bytes = 1;
-		c->src2.val = 1;
-		break;
-	}
-
-	/* Decode and fetch the destination operand: register or memory. */
-	switch (c->d & DstMask) {
-	case ImplicitOps:
-		/* Special instructions do their own operand decoding. */
-		return 0;
-	case DstReg:
-		decode_register_operand(&c->dst, c,
-			 c->twobyte && (c->b == 0xb6 || c->b == 0xb7));
-		break;
-	case DstMem:
-		if ((c->d & ModRM) && c->modrm_mod == 3) {
-			c->dst.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
-			c->dst.type = OP_REG;
-			c->dst.val = c->dst.orig_val = c->modrm_val;
-			c->dst.ptr = c->modrm_ptr;
-			break;
-		}
-		c->dst.type = OP_MEM;
-		break;
-	case DstAcc:
-		c->dst.type = OP_REG;
-		c->dst.bytes = c->op_bytes;
-		c->dst.ptr = &c->regs[VCPU_REGS_RAX];
-		switch (c->op_bytes) {
-			case 1:
-				c->dst.val = *(u8 *)c->dst.ptr;
-				break;
-			case 2:
-				c->dst.val = *(u16 *)c->dst.ptr;
-				break;
-			case 4:
-				c->dst.val = *(u32 *)c->dst.ptr;
-				break;
-		}
-		c->dst.orig_val = c->dst.val;
-		break;
-	}
-
-	if (c->rip_relative)
-		c->modrm_ea += c->eip;
-
-done:
-	return (rc == X86EMUL_UNHANDLEABLE) ? -1 : 0;
-}
-
-static inline void emulate_push(struct x86_emulate_ctxt *ctxt)
-{
-	struct decode_cache *c = &ctxt->decode;
-
-	c->dst.type  = OP_MEM;
-	c->dst.bytes = c->op_bytes;
-	c->dst.val = c->src.val;
-	register_address_increment(c, &c->regs[VCPU_REGS_RSP], -c->op_bytes);
-	c->dst.ptr = (void *) register_address(c, ss_base(ctxt),
-					       c->regs[VCPU_REGS_RSP]);
-}
-
-static int emulate_pop(struct x86_emulate_ctxt *ctxt,
-		       struct x86_emulate_ops *ops,
-		       void *dest, int len)
-{
-	struct decode_cache *c = &ctxt->decode;
-	int rc;
-
-	rc = ops->read_emulated(register_address(c, ss_base(ctxt),
-						 c->regs[VCPU_REGS_RSP]),
-				dest, len, ctxt->vcpu);
-	if (rc != 0)
-		return rc;
-
-	register_address_increment(c, &c->regs[VCPU_REGS_RSP], len);
-	return rc;
-}
-
-static inline int emulate_grp1a(struct x86_emulate_ctxt *ctxt,
-				struct x86_emulate_ops *ops)
-{
-	struct decode_cache *c = &ctxt->decode;
-	int rc;
-
-	rc = emulate_pop(ctxt, ops, &c->dst.val, c->dst.bytes);
-	if (rc != 0)
-		return rc;
-	return 0;
-}
-
-static inline void emulate_grp2(struct x86_emulate_ctxt *ctxt)
-{
-	struct decode_cache *c = &ctxt->decode;
-	switch (c->modrm_reg) {
-	case 0:	/* rol */
-		emulate_2op_SrcB("rol", c->src, c->dst, ctxt->eflags);
-		break;
-	case 1:	/* ror */
-		emulate_2op_SrcB("ror", c->src, c->dst, ctxt->eflags);
-		break;
-	case 2:	/* rcl */
-		emulate_2op_SrcB("rcl", c->src, c->dst, ctxt->eflags);
-		break;
-	case 3:	/* rcr */
-		emulate_2op_SrcB("rcr", c->src, c->dst, ctxt->eflags);
-		break;
-	case 4:	/* sal/shl */
-	case 6:	/* sal/shl */
-		emulate_2op_SrcB("sal", c->src, c->dst, ctxt->eflags);
-		break;
-	case 5:	/* shr */
-		emulate_2op_SrcB("shr", c->src, c->dst, ctxt->eflags);
-		break;
-	case 7:	/* sar */
-		emulate_2op_SrcB("sar", c->src, c->dst, ctxt->eflags);
-		break;
-	}
-}
-
-static inline int emulate_grp3(struct x86_emulate_ctxt *ctxt,
-			       struct x86_emulate_ops *ops)
-{
-	struct decode_cache *c = &ctxt->decode;
-	int rc = 0;
-
-	switch (c->modrm_reg) {
-	case 0 ... 1:	/* test */
-		emulate_2op_SrcV("test", c->src, c->dst, ctxt->eflags);
-		break;
-	case 2:	/* not */
-		c->dst.val = ~c->dst.val;
-		break;
-	case 3:	/* neg */
-		emulate_1op("neg", c->dst, ctxt->eflags);
-		break;
-	default:
-		DPRINTF("Cannot emulate %02x\n", c->b);
-		rc = X86EMUL_UNHANDLEABLE;
-		break;
-	}
-	return rc;
-}
-
-static inline int emulate_grp45(struct x86_emulate_ctxt *ctxt,
-			       struct x86_emulate_ops *ops)
-{
-	struct decode_cache *c = &ctxt->decode;
-
-	switch (c->modrm_reg) {
-	case 0:	/* inc */
-		emulate_1op("inc", c->dst, ctxt->eflags);
-		break;
-	case 1:	/* dec */
-		emulate_1op("dec", c->dst, ctxt->eflags);
-		break;
-	case 2: /* call near abs */ {
-		long int old_eip;
-		old_eip = c->eip;
-		c->eip = c->src.val;
-		c->src.val = old_eip;
-		emulate_push(ctxt);
-		break;
-	}
-	case 4: /* jmp abs */
-		c->eip = c->src.val;
-		break;
-	case 6:	/* push */
-		emulate_push(ctxt);
-		break;
-	}
-	return 0;
-}
-
-static inline int emulate_grp9(struct x86_emulate_ctxt *ctxt,
-			       struct x86_emulate_ops *ops,
-			       unsigned long memop)
-{
-	struct decode_cache *c = &ctxt->decode;
-	u64 old, new;
-	int rc;
-
-	rc = ops->read_emulated(memop, &old, 8, ctxt->vcpu);
-	if (rc != 0)
-		return rc;
-
-	if (((u32) (old >> 0) != (u32) c->regs[VCPU_REGS_RAX]) ||
-	    ((u32) (old >> 32) != (u32) c->regs[VCPU_REGS_RDX])) {
-
-		c->regs[VCPU_REGS_RAX] = (u32) (old >> 0);
-		c->regs[VCPU_REGS_RDX] = (u32) (old >> 32);
-		ctxt->eflags &= ~EFLG_ZF;
-
-	} else {
-		new = ((u64)c->regs[VCPU_REGS_RCX] << 32) |
-		       (u32) c->regs[VCPU_REGS_RBX];
-
-		rc = ops->cmpxchg_emulated(memop, &old, &new, 8, ctxt->vcpu);
-		if (rc != 0)
-			return rc;
-		ctxt->eflags |= EFLG_ZF;
-	}
-	return 0;
-}
-
-static int emulate_ret_far(struct x86_emulate_ctxt *ctxt,
-			   struct x86_emulate_ops *ops)
-{
-	struct decode_cache *c = &ctxt->decode;
-	int rc;
-	unsigned long cs;
-
-	rc = emulate_pop(ctxt, ops, &c->eip, c->op_bytes);
-	if (rc)
-		return rc;
-	if (c->op_bytes == 4)
-		c->eip = (u32)c->eip;
-	rc = emulate_pop(ctxt, ops, &cs, c->op_bytes);
-	if (rc)
-		return rc;
-	rc = kvm_load_segment_descriptor(ctxt->vcpu, (u16)cs, 1, VCPU_SREG_CS);
-	return rc;
-}
-
-static inline int writeback(struct x86_emulate_ctxt *ctxt,
-			    struct x86_emulate_ops *ops)
-{
-	int rc;
-	struct decode_cache *c = &ctxt->decode;
-
-	switch (c->dst.type) {
-	case OP_REG:
-		/* The 4-byte case *is* correct:
-		 * in 64-bit mode we zero-extend.
-		 */
-		switch (c->dst.bytes) {
-		case 1:
-			*(u8 *)c->dst.ptr = (u8)c->dst.val;
-			break;
-		case 2:
-			*(u16 *)c->dst.ptr = (u16)c->dst.val;
-			break;
-		case 4:
-			*c->dst.ptr = (u32)c->dst.val;
-			break;	/* 64b: zero-ext */
-		case 8:
-			*c->dst.ptr = c->dst.val;
-			break;
-		}
-		break;
-	case OP_MEM:
-		if (c->lock_prefix)
-			rc = ops->cmpxchg_emulated(
-					(unsigned long)c->dst.ptr,
-					&c->dst.orig_val,
-					&c->dst.val,
-					c->dst.bytes,
-					ctxt->vcpu);
-		else
-			rc = ops->write_emulated(
-					(unsigned long)c->dst.ptr,
-					&c->dst.val,
-					c->dst.bytes,
-					ctxt->vcpu);
-		if (rc != 0)
-			return rc;
-		break;
-	case OP_NONE:
-		/* no writeback */
-		break;
-	default:
-		break;
-	}
-	return 0;
-}
-
-static void toggle_interruptibility(struct x86_emulate_ctxt *ctxt, u32 mask)
-{
-	u32 int_shadow = kvm_x86_ops->get_interrupt_shadow(ctxt->vcpu, mask);
-	/*
-	 * an sti; sti; sequence only disable interrupts for the first
-	 * instruction. So, if the last instruction, be it emulated or
-	 * not, left the system with the INT_STI flag enabled, it
-	 * means that the last instruction is an sti. We should not
-	 * leave the flag on in this case. The same goes for mov ss
-	 */
-	if (!(int_shadow & mask))
-		ctxt->interruptibility = mask;
-}
-
-static inline void
-setup_syscalls_segments(struct x86_emulate_ctxt *ctxt,
-	struct kvm_segment *cs, struct kvm_segment *ss)
-{
-	memset(cs, 0, sizeof(struct kvm_segment));
-	kvm_x86_ops->get_segment(ctxt->vcpu, cs, VCPU_SREG_CS);
-	memset(ss, 0, sizeof(struct kvm_segment));
-
-	cs->l = 0;		/* will be adjusted later */
-	cs->base = 0;		/* flat segment */
-	cs->g = 1;		/* 4kb granularity */
-	cs->limit = 0xffffffff;	/* 4GB limit */
-	cs->type = 0x0b;	/* Read, Execute, Accessed */
-	cs->s = 1;
-	cs->dpl = 0;		/* will be adjusted later */
-	cs->present = 1;
-	cs->db = 1;
-
-	ss->unusable = 0;
-	ss->base = 0;		/* flat segment */
-	ss->limit = 0xffffffff;	/* 4GB limit */
-	ss->g = 1;		/* 4kb granularity */
-	ss->s = 1;
-	ss->type = 0x03;	/* Read/Write, Accessed */
-	ss->db = 1;		/* 32bit stack segment */
-	ss->dpl = 0;
-	ss->present = 1;
-}
-
-static int
-emulate_syscall(struct x86_emulate_ctxt *ctxt)
-{
-	struct decode_cache *c = &ctxt->decode;
-	struct kvm_segment cs, ss;
-	u64 msr_data;
-
-	/* syscall is not available in real mode */
-	if (c->lock_prefix || ctxt->mode == X86EMUL_MODE_REAL
-		|| !(ctxt->vcpu->arch.cr0 & X86_CR0_PE))
-		return -1;
-
-	setup_syscalls_segments(ctxt, &cs, &ss);
-
-	kvm_x86_ops->get_msr(ctxt->vcpu, MSR_STAR, &msr_data);
-	msr_data >>= 32;
-	cs.selector = (u16)(msr_data & 0xfffc);
-	ss.selector = (u16)(msr_data + 8);
-
-	if (is_long_mode(ctxt->vcpu)) {
-		cs.db = 0;
-		cs.l = 1;
-	}
-	kvm_x86_ops->set_segment(ctxt->vcpu, &cs, VCPU_SREG_CS);
-	kvm_x86_ops->set_segment(ctxt->vcpu, &ss, VCPU_SREG_SS);
-
-	c->regs[VCPU_REGS_RCX] = c->eip;
-	if (is_long_mode(ctxt->vcpu)) {
-#ifdef CONFIG_X86_64
-		c->regs[VCPU_REGS_R11] = ctxt->eflags & ~EFLG_RF;
-
-		kvm_x86_ops->get_msr(ctxt->vcpu,
-			ctxt->mode == X86EMUL_MODE_PROT64 ?
-			MSR_LSTAR : MSR_CSTAR, &msr_data);
-		c->eip = msr_data;
-
-		kvm_x86_ops->get_msr(ctxt->vcpu, MSR_SYSCALL_MASK, &msr_data);
-		ctxt->eflags &= ~(msr_data | EFLG_RF);
-#endif
-	} else {
-		/* legacy mode */
-		kvm_x86_ops->get_msr(ctxt->vcpu, MSR_STAR, &msr_data);
-		c->eip = (u32)msr_data;
-
-		ctxt->eflags &= ~(EFLG_VM | EFLG_IF | EFLG_RF);
-	}
-
-	return 0;
-}
-
-static int
-emulate_sysenter(struct x86_emulate_ctxt *ctxt)
-{
-	struct decode_cache *c = &ctxt->decode;
-	struct kvm_segment cs, ss;
-	u64 msr_data;
-
-	/* inject #UD if LOCK prefix is used */
-	if (c->lock_prefix)
-		return -1;
-
-	/* inject #GP if in real mode or paging is disabled */
-	if (ctxt->mode == X86EMUL_MODE_REAL ||
-		!(ctxt->vcpu->arch.cr0 & X86_CR0_PE)) {
-		kvm_inject_gp(ctxt->vcpu, 0);
-		return -1;
-	}
-
-	/* XXX sysenter/sysexit have not been tested in 64bit mode.
-	* Therefore, we inject an #UD.
-	*/
-	if (ctxt->mode == X86EMUL_MODE_PROT64)
-		return -1;
-
-	setup_syscalls_segments(ctxt, &cs, &ss);
-
-	kvm_x86_ops->get_msr(ctxt->vcpu, MSR_IA32_SYSENTER_CS, &msr_data);
-	switch (ctxt->mode) {
-	case X86EMUL_MODE_PROT32:
-		if ((msr_data & 0xfffc) == 0x0) {
-			kvm_inject_gp(ctxt->vcpu, 0);
-			return -1;
-		}
-		break;
-	case X86EMUL_MODE_PROT64:
-		if (msr_data == 0x0) {
-			kvm_inject_gp(ctxt->vcpu, 0);
-			return -1;
-		}
-		break;
-	}
-
-	ctxt->eflags &= ~(EFLG_VM | EFLG_IF | EFLG_RF);
-	cs.selector = (u16)msr_data;
-	cs.selector &= ~SELECTOR_RPL_MASK;
-	ss.selector = cs.selector + 8;
-	ss.selector &= ~SELECTOR_RPL_MASK;
-	if (ctxt->mode == X86EMUL_MODE_PROT64
-		|| is_long_mode(ctxt->vcpu)) {
-		cs.db = 0;
-		cs.l = 1;
-	}
-
-	kvm_x86_ops->set_segment(ctxt->vcpu, &cs, VCPU_SREG_CS);
-	kvm_x86_ops->set_segment(ctxt->vcpu, &ss, VCPU_SREG_SS);
-
-	kvm_x86_ops->get_msr(ctxt->vcpu, MSR_IA32_SYSENTER_EIP, &msr_data);
-	c->eip = msr_data;
-
-	kvm_x86_ops->get_msr(ctxt->vcpu, MSR_IA32_SYSENTER_ESP, &msr_data);
-	c->regs[VCPU_REGS_RSP] = msr_data;
-
-	return 0;
-}
-
-static int
-emulate_sysexit(struct x86_emulate_ctxt *ctxt)
-{
-	struct decode_cache *c = &ctxt->decode;
-	struct kvm_segment cs, ss;
-	u64 msr_data;
-	int usermode;
-
-	/* inject #UD if LOCK prefix is used */
-	if (c->lock_prefix)
-		return -1;
-
-	/* inject #GP if in real mode or paging is disabled */
-	if (ctxt->mode == X86EMUL_MODE_REAL
-		|| !(ctxt->vcpu->arch.cr0 & X86_CR0_PE)) {
-		kvm_inject_gp(ctxt->vcpu, 0);
-		return -1;
-	}
-
-	/* sysexit must be called from CPL 0 */
-	if (kvm_x86_ops->get_cpl(ctxt->vcpu) != 0) {
-		kvm_inject_gp(ctxt->vcpu, 0);
-		return -1;
-	}
-
-	setup_syscalls_segments(ctxt, &cs, &ss);
-
-	if ((c->rex_prefix & 0x8) != 0x0)
-		usermode = X86EMUL_MODE_PROT64;
-	else
-		usermode = X86EMUL_MODE_PROT32;
-
-	cs.dpl = 3;
-	ss.dpl = 3;
-	kvm_x86_ops->get_msr(ctxt->vcpu, MSR_IA32_SYSENTER_CS, &msr_data);
-	switch (usermode) {
-	case X86EMUL_MODE_PROT32:
-		cs.selector = (u16)(msr_data + 16);
-		if ((msr_data & 0xfffc) == 0x0) {
-			kvm_inject_gp(ctxt->vcpu, 0);
-			return -1;
-		}
-		ss.selector = (u16)(msr_data + 24);
-		break;
-	case X86EMUL_MODE_PROT64:
-		cs.selector = (u16)(msr_data + 32);
-		if (msr_data == 0x0) {
-			kvm_inject_gp(ctxt->vcpu, 0);
-			return -1;
-		}
-		ss.selector = cs.selector + 8;
-		cs.db = 0;
-		cs.l = 1;
-		break;
-	}
-	cs.selector |= SELECTOR_RPL_MASK;
-	ss.selector |= SELECTOR_RPL_MASK;
-
-	kvm_x86_ops->set_segment(ctxt->vcpu, &cs, VCPU_SREG_CS);
-	kvm_x86_ops->set_segment(ctxt->vcpu, &ss, VCPU_SREG_SS);
-
-	c->eip = ctxt->vcpu->arch.regs[VCPU_REGS_RDX];
-	c->regs[VCPU_REGS_RSP] = ctxt->vcpu->arch.regs[VCPU_REGS_RCX];
-
-	return 0;
-}
-
-int
-x86_emulate_insn(struct x86_emulate_ctxt *ctxt, struct x86_emulate_ops *ops)
-{
-	unsigned long memop = 0;
-	u64 msr_data;
-	unsigned long saved_eip = 0;
-	struct decode_cache *c = &ctxt->decode;
-	unsigned int port;
-	int io_dir_in;
-	int rc = 0;
-
-	ctxt->interruptibility = 0;
-
-	/* Shadow copy of register state. Committed on successful emulation.
-	 * NOTE: we can copy them from vcpu as x86_decode_insn() doesn't
-	 * modify them.
-	 */
-
-	memcpy(c->regs, ctxt->vcpu->arch.regs, sizeof c->regs);
-	saved_eip = c->eip;
-
-	if (((c->d & ModRM) && (c->modrm_mod != 3)) || (c->d & MemAbs))
-		memop = c->modrm_ea;
-
-	if (c->rep_prefix && (c->d & String)) {
-		/* All REP prefixes have the same first termination condition */
-		if (c->regs[VCPU_REGS_RCX] == 0) {
-			kvm_rip_write(ctxt->vcpu, c->eip);
-			goto done;
-		}
-		/* The second termination condition only applies for REPE
-		 * and REPNE. Test if the repeat string operation prefix is
-		 * REPE/REPZ or REPNE/REPNZ and if it's the case it tests the
-		 * corresponding termination condition according to:
-		 * 	- if REPE/REPZ and ZF = 0 then done
-		 * 	- if REPNE/REPNZ and ZF = 1 then done
-		 */
-		if ((c->b == 0xa6) || (c->b == 0xa7) ||
-				(c->b == 0xae) || (c->b == 0xaf)) {
-			if ((c->rep_prefix == REPE_PREFIX) &&
-				((ctxt->eflags & EFLG_ZF) == 0)) {
-					kvm_rip_write(ctxt->vcpu, c->eip);
-					goto done;
-			}
-			if ((c->rep_prefix == REPNE_PREFIX) &&
-				((ctxt->eflags & EFLG_ZF) == EFLG_ZF)) {
-				kvm_rip_write(ctxt->vcpu, c->eip);
-				goto done;
-			}
-		}
-		c->regs[VCPU_REGS_RCX]--;
-		c->eip = kvm_rip_read(ctxt->vcpu);
-	}
-
-	if (c->src.type == OP_MEM) {
-		c->src.ptr = (unsigned long *)memop;
-		c->src.val = 0;
-		rc = ops->read_emulated((unsigned long)c->src.ptr,
-					&c->src.val,
-					c->src.bytes,
-					ctxt->vcpu);
-		if (rc != 0)
-			goto done;
-		c->src.orig_val = c->src.val;
-	}
-
-	if ((c->d & DstMask) == ImplicitOps)
-		goto special_insn;
-
-
-	if (c->dst.type == OP_MEM) {
-		c->dst.ptr = (unsigned long *)memop;
-		c->dst.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
-		c->dst.val = 0;
-		if (c->d & BitOp) {
-			unsigned long mask = ~(c->dst.bytes * 8 - 1);
-
-			c->dst.ptr = (void *)c->dst.ptr +
-						   (c->src.val & mask) / 8;
-		}
-		if (!(c->d & Mov) &&
-				   /* optimisation - avoid slow emulated read */
-		    ((rc = ops->read_emulated((unsigned long)c->dst.ptr,
-					   &c->dst.val,
-					  c->dst.bytes, ctxt->vcpu)) != 0))
-			goto done;
-	}
-	c->dst.orig_val = c->dst.val;
-
-special_insn:
-
-	if (c->twobyte)
-		goto twobyte_insn;
-
-	switch (c->b) {
-	case 0x00 ... 0x05:
-	      add:		/* add */
-		emulate_2op_SrcV("add", c->src, c->dst, ctxt->eflags);
-		break;
-	case 0x08 ... 0x0d:
-	      or:		/* or */
-		emulate_2op_SrcV("or", c->src, c->dst, ctxt->eflags);
-		break;
-	case 0x10 ... 0x15:
-	      adc:		/* adc */
-		emulate_2op_SrcV("adc", c->src, c->dst, ctxt->eflags);
-		break;
-	case 0x18 ... 0x1d:
-	      sbb:		/* sbb */
-		emulate_2op_SrcV("sbb", c->src, c->dst, ctxt->eflags);
-		break;
-	case 0x20 ... 0x25:
-	      and:		/* and */
-		emulate_2op_SrcV("and", c->src, c->dst, ctxt->eflags);
-		break;
-	case 0x28 ... 0x2d:
-	      sub:		/* sub */
-		emulate_2op_SrcV("sub", c->src, c->dst, ctxt->eflags);
-		break;
-	case 0x30 ... 0x35:
-	      xor:		/* xor */
-		emulate_2op_SrcV("xor", c->src, c->dst, ctxt->eflags);
-		break;
-	case 0x38 ... 0x3d:
-	      cmp:		/* cmp */
-		emulate_2op_SrcV("cmp", c->src, c->dst, ctxt->eflags);
-		break;
-	case 0x40 ... 0x47: /* inc r16/r32 */
-		emulate_1op("inc", c->dst, ctxt->eflags);
-		break;
-	case 0x48 ... 0x4f: /* dec r16/r32 */
-		emulate_1op("dec", c->dst, ctxt->eflags);
-		break;
-	case 0x50 ... 0x57:  /* push reg */
-		emulate_push(ctxt);
-		break;
-	case 0x58 ... 0x5f: /* pop reg */
-	pop_instruction:
-		rc = emulate_pop(ctxt, ops, &c->dst.val, c->op_bytes);
-		if (rc != 0)
-			goto done;
-		break;
-	case 0x63:		/* movsxd */
-		if (ctxt->mode != X86EMUL_MODE_PROT64)
-			goto cannot_emulate;
-		c->dst.val = (s32) c->src.val;
-		break;
-	case 0x68: /* push imm */
-	case 0x6a: /* push imm8 */
-		emulate_push(ctxt);
-		break;
-	case 0x6c:		/* insb */
-	case 0x6d:		/* insw/insd */
-		 if (kvm_emulate_pio_string(ctxt->vcpu, NULL,
-				1,
-				(c->d & ByteOp) ? 1 : c->op_bytes,
-				c->rep_prefix ?
-				address_mask(c, c->regs[VCPU_REGS_RCX]) : 1,
-				(ctxt->eflags & EFLG_DF),
-				register_address(c, es_base(ctxt),
-						 c->regs[VCPU_REGS_RDI]),
-				c->rep_prefix,
-				c->regs[VCPU_REGS_RDX]) == 0) {
-			c->eip = saved_eip;
-			return -1;
-		}
-		return 0;
-	case 0x6e:		/* outsb */
-	case 0x6f:		/* outsw/outsd */
-		if (kvm_emulate_pio_string(ctxt->vcpu, NULL,
-				0,
-				(c->d & ByteOp) ? 1 : c->op_bytes,
-				c->rep_prefix ?
-				address_mask(c, c->regs[VCPU_REGS_RCX]) : 1,
-				(ctxt->eflags & EFLG_DF),
-					 register_address(c,
-					  seg_override_base(ctxt, c),
-						 c->regs[VCPU_REGS_RSI]),
-				c->rep_prefix,
-				c->regs[VCPU_REGS_RDX]) == 0) {
-			c->eip = saved_eip;
-			return -1;
-		}
-		return 0;
-	case 0x70 ... 0x7f: /* jcc (short) */
-		if (test_cc(c->b, ctxt->eflags))
-			jmp_rel(c, c->src.val);
-		break;
-	case 0x80 ... 0x83:	/* Grp1 */
-		switch (c->modrm_reg) {
-		case 0:
-			goto add;
-		case 1:
-			goto or;
-		case 2:
-			goto adc;
-		case 3:
-			goto sbb;
-		case 4:
-			goto and;
-		case 5:
-			goto sub;
-		case 6:
-			goto xor;
-		case 7:
-			goto cmp;
-		}
-		break;
-	case 0x84 ... 0x85:
-		emulate_2op_SrcV("test", c->src, c->dst, ctxt->eflags);
-		break;
-	case 0x86 ... 0x87:	/* xchg */
-	xchg:
-		/* Write back the register source. */
-		switch (c->dst.bytes) {
-		case 1:
-			*(u8 *) c->src.ptr = (u8) c->dst.val;
-			break;
-		case 2:
-			*(u16 *) c->src.ptr = (u16) c->dst.val;
-			break;
-		case 4:
-			*c->src.ptr = (u32) c->dst.val;
-			break;	/* 64b reg: zero-extend */
-		case 8:
-			*c->src.ptr = c->dst.val;
-			break;
-		}
-		/*
-		 * Write back the memory destination with implicit LOCK
-		 * prefix.
-		 */
-		c->dst.val = c->src.val;
-		c->lock_prefix = 1;
-		break;
-	case 0x88 ... 0x8b:	/* mov */
-		goto mov;
-	case 0x8c: { /* mov r/m, sreg */
-		struct kvm_segment segreg;
-
-		if (c->modrm_reg <= 5)
-			kvm_get_segment(ctxt->vcpu, &segreg, c->modrm_reg);
-		else {
-			printk(KERN_INFO "0x8c: Invalid segreg in modrm byte 0x%02x\n",
-			       c->modrm);
-			goto cannot_emulate;
-		}
-		c->dst.val = segreg.selector;
-		break;
-	}
-	case 0x8d: /* lea r16/r32, m */
-		c->dst.val = c->modrm_ea;
-		break;
-	case 0x8e: { /* mov seg, r/m16 */
-		uint16_t sel;
-		int type_bits;
-		int err;
-
-		sel = c->src.val;
-		if (c->modrm_reg == VCPU_SREG_SS)
-			toggle_interruptibility(ctxt, X86_SHADOW_INT_MOV_SS);
-
-		if (c->modrm_reg <= 5) {
-			type_bits = (c->modrm_reg == 1) ? 9 : 1;
-			err = kvm_load_segment_descriptor(ctxt->vcpu, sel,
-							  type_bits, c->modrm_reg);
-		} else {
-			printk(KERN_INFO "Invalid segreg in modrm byte 0x%02x\n",
-					c->modrm);
-			goto cannot_emulate;
-		}
-
-		if (err < 0)
-			goto cannot_emulate;
-
-		c->dst.type = OP_NONE;  /* Disable writeback. */
-		break;
-	}
-	case 0x8f:		/* pop (sole member of Grp1a) */
-		rc = emulate_grp1a(ctxt, ops);
-		if (rc != 0)
-			goto done;
-		break;
-	case 0x90: /* nop / xchg r8,rax */
-		if (!(c->rex_prefix & 1)) { /* nop */
-			c->dst.type = OP_NONE;
-			break;
-		}
-	case 0x91 ... 0x97: /* xchg reg,rax */
-		c->src.type = c->dst.type = OP_REG;
-		c->src.bytes = c->dst.bytes = c->op_bytes;
-		c->src.ptr = (unsigned long *) &c->regs[VCPU_REGS_RAX];
-		c->src.val = *(c->src.ptr);
-		goto xchg;
-	case 0x9c: /* pushf */
-		c->src.val =  (unsigned long) ctxt->eflags;
-		emulate_push(ctxt);
-		break;
-	case 0x9d: /* popf */
-		c->dst.type = OP_REG;
-		c->dst.ptr = (unsigned long *) &ctxt->eflags;
-		c->dst.bytes = c->op_bytes;
-		goto pop_instruction;
-	case 0xa0 ... 0xa1:	/* mov */
-		c->dst.ptr = (unsigned long *)&c->regs[VCPU_REGS_RAX];
-		c->dst.val = c->src.val;
-		break;
-	case 0xa2 ... 0xa3:	/* mov */
-		c->dst.val = (unsigned long)c->regs[VCPU_REGS_RAX];
-		break;
-	case 0xa4 ... 0xa5:	/* movs */
-		c->dst.type = OP_MEM;
-		c->dst.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
-		c->dst.ptr = (unsigned long *)register_address(c,
-						   es_base(ctxt),
-						   c->regs[VCPU_REGS_RDI]);
-		if ((rc = ops->read_emulated(register_address(c,
-					   seg_override_base(ctxt, c),
-					c->regs[VCPU_REGS_RSI]),
-					&c->dst.val,
-					c->dst.bytes, ctxt->vcpu)) != 0)
-			goto done;
-		register_address_increment(c, &c->regs[VCPU_REGS_RSI],
-				       (ctxt->eflags & EFLG_DF) ? -c->dst.bytes
-							   : c->dst.bytes);
-		register_address_increment(c, &c->regs[VCPU_REGS_RDI],
-				       (ctxt->eflags & EFLG_DF) ? -c->dst.bytes
-							   : c->dst.bytes);
-		break;
-	case 0xa6 ... 0xa7:	/* cmps */
-		c->src.type = OP_NONE; /* Disable writeback. */
-		c->src.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
-		c->src.ptr = (unsigned long *)register_address(c,
-				       seg_override_base(ctxt, c),
-						   c->regs[VCPU_REGS_RSI]);
-		if ((rc = ops->read_emulated((unsigned long)c->src.ptr,
-						&c->src.val,
-						c->src.bytes,
-						ctxt->vcpu)) != 0)
-			goto done;
-
-		c->dst.type = OP_NONE; /* Disable writeback. */
-		c->dst.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
-		c->dst.ptr = (unsigned long *)register_address(c,
-						   es_base(ctxt),
-						   c->regs[VCPU_REGS_RDI]);
-		if ((rc = ops->read_emulated((unsigned long)c->dst.ptr,
-						&c->dst.val,
-						c->dst.bytes,
-						ctxt->vcpu)) != 0)
-			goto done;
-
-		DPRINTF("cmps: mem1=0x%p mem2=0x%p\n", c->src.ptr, c->dst.ptr);
-
-		emulate_2op_SrcV("cmp", c->src, c->dst, ctxt->eflags);
-
-		register_address_increment(c, &c->regs[VCPU_REGS_RSI],
-				       (ctxt->eflags & EFLG_DF) ? -c->src.bytes
-								  : c->src.bytes);
-		register_address_increment(c, &c->regs[VCPU_REGS_RDI],
-				       (ctxt->eflags & EFLG_DF) ? -c->dst.bytes
-								  : c->dst.bytes);
-
-		break;
-	case 0xaa ... 0xab:	/* stos */
-		c->dst.type = OP_MEM;
-		c->dst.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
-		c->dst.ptr = (unsigned long *)register_address(c,
-						   es_base(ctxt),
-						   c->regs[VCPU_REGS_RDI]);
-		c->dst.val = c->regs[VCPU_REGS_RAX];
-		register_address_increment(c, &c->regs[VCPU_REGS_RDI],
-				       (ctxt->eflags & EFLG_DF) ? -c->dst.bytes
-							   : c->dst.bytes);
-		break;
-	case 0xac ... 0xad:	/* lods */
-		c->dst.type = OP_REG;
-		c->dst.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
-		c->dst.ptr = (unsigned long *)&c->regs[VCPU_REGS_RAX];
-		if ((rc = ops->read_emulated(register_address(c,
-						 seg_override_base(ctxt, c),
-						 c->regs[VCPU_REGS_RSI]),
-						 &c->dst.val,
-						 c->dst.bytes,
-						 ctxt->vcpu)) != 0)
-			goto done;
-		register_address_increment(c, &c->regs[VCPU_REGS_RSI],
-				       (ctxt->eflags & EFLG_DF) ? -c->dst.bytes
-							   : c->dst.bytes);
-		break;
-	case 0xae ... 0xaf:	/* scas */
-		DPRINTF("Urk! I don't handle SCAS.\n");
-		goto cannot_emulate;
-	case 0xb0 ... 0xbf: /* mov r, imm */
-		goto mov;
-	case 0xc0 ... 0xc1:
-		emulate_grp2(ctxt);
-		break;
-	case 0xc3: /* ret */
-		c->dst.type = OP_REG;
-		c->dst.ptr = &c->eip;
-		c->dst.bytes = c->op_bytes;
-		goto pop_instruction;
-	case 0xc6 ... 0xc7:	/* mov (sole member of Grp11) */
-	mov:
-		c->dst.val = c->src.val;
-		break;
-	case 0xcb:		/* ret far */
-		rc = emulate_ret_far(ctxt, ops);
-		if (rc)
-			goto done;
-		break;
-	case 0xd0 ... 0xd1:	/* Grp2 */
-		c->src.val = 1;
-		emulate_grp2(ctxt);
-		break;
-	case 0xd2 ... 0xd3:	/* Grp2 */
-		c->src.val = c->regs[VCPU_REGS_RCX];
-		emulate_grp2(ctxt);
-		break;
-	case 0xe4: 	/* inb */
-	case 0xe5: 	/* in */
-		port = c->src.val;
-		io_dir_in = 1;
-		goto do_io;
-	case 0xe6: /* outb */
-	case 0xe7: /* out */
-		port = c->src.val;
-		io_dir_in = 0;
-		goto do_io;
-	case 0xe8: /* call (near) */ {
-		long int rel = c->src.val;
-		c->src.val = (unsigned long) c->eip;
-		jmp_rel(c, rel);
-		emulate_push(ctxt);
-		break;
-	}
-	case 0xe9: /* jmp rel */
-		goto jmp;
-	case 0xea: /* jmp far */
-		if (kvm_load_segment_descriptor(ctxt->vcpu, c->src2.val, 9,
-					VCPU_SREG_CS) < 0) {
-			DPRINTF("jmp far: Failed to load CS descriptor\n");
-			goto cannot_emulate;
-		}
-
-		c->eip = c->src.val;
-		break;
-	case 0xeb:
-	      jmp:		/* jmp rel short */
-		jmp_rel(c, c->src.val);
-		c->dst.type = OP_NONE; /* Disable writeback. */
-		break;
-	case 0xec: /* in al,dx */
-	case 0xed: /* in (e/r)ax,dx */
-		port = c->regs[VCPU_REGS_RDX];
-		io_dir_in = 1;
-		goto do_io;
-	case 0xee: /* out al,dx */
-	case 0xef: /* out (e/r)ax,dx */
-		port = c->regs[VCPU_REGS_RDX];
-		io_dir_in = 0;
-	do_io:	if (kvm_emulate_pio(ctxt->vcpu, NULL, io_dir_in,
-				   (c->d & ByteOp) ? 1 : c->op_bytes,
-				   port) != 0) {
-			c->eip = saved_eip;
-			goto cannot_emulate;
-		}
-		break;
-	case 0xf4:              /* hlt */
-		ctxt->vcpu->arch.halt_request = 1;
-		break;
-	case 0xf5:	/* cmc */
-		/* complement carry flag from eflags reg */
-		ctxt->eflags ^= EFLG_CF;
-		c->dst.type = OP_NONE;	/* Disable writeback. */
-		break;
-	case 0xf6 ... 0xf7:	/* Grp3 */
-		rc = emulate_grp3(ctxt, ops);
-		if (rc != 0)
-			goto done;
-		break;
-	case 0xf8: /* clc */
-		ctxt->eflags &= ~EFLG_CF;
-		c->dst.type = OP_NONE;	/* Disable writeback. */
-		break;
-	case 0xfa: /* cli */
-		ctxt->eflags &= ~X86_EFLAGS_IF;
-		c->dst.type = OP_NONE;	/* Disable writeback. */
-		break;
-	case 0xfb: /* sti */
-		toggle_interruptibility(ctxt, X86_SHADOW_INT_STI);
-		ctxt->eflags |= X86_EFLAGS_IF;
-		c->dst.type = OP_NONE;	/* Disable writeback. */
-		break;
-	case 0xfc: /* cld */
-		ctxt->eflags &= ~EFLG_DF;
-		c->dst.type = OP_NONE;	/* Disable writeback. */
-		break;
-	case 0xfd: /* std */
-		ctxt->eflags |= EFLG_DF;
-		c->dst.type = OP_NONE;	/* Disable writeback. */
-		break;
-	case 0xfe ... 0xff:	/* Grp4/Grp5 */
-		rc = emulate_grp45(ctxt, ops);
-		if (rc != 0)
-			goto done;
-		break;
-	}
-
-writeback:
-	rc = writeback(ctxt, ops);
-	if (rc != 0)
-		goto done;
-
-	/* Commit shadow register state. */
-	memcpy(ctxt->vcpu->arch.regs, c->regs, sizeof c->regs);
-	kvm_rip_write(ctxt->vcpu, c->eip);
-
-done:
-	if (rc == X86EMUL_UNHANDLEABLE) {
-		c->eip = saved_eip;
-		return -1;
-	}
-	return 0;
-
-twobyte_insn:
-	switch (c->b) {
-	case 0x01: /* lgdt, lidt, lmsw */
-		switch (c->modrm_reg) {
-			u16 size;
-			unsigned long address;
-
-		case 0: /* vmcall */
-			if (c->modrm_mod != 3 || c->modrm_rm != 1)
-				goto cannot_emulate;
-
-			rc = kvm_fix_hypercall(ctxt->vcpu);
-			if (rc)
-				goto done;
-
-			/* Let the processor re-execute the fixed hypercall */
-			c->eip = kvm_rip_read(ctxt->vcpu);
-			/* Disable writeback. */
-			c->dst.type = OP_NONE;
-			break;
-		case 2: /* lgdt */
-			rc = read_descriptor(ctxt, ops, c->src.ptr,
-					     &size, &address, c->op_bytes);
-			if (rc)
-				goto done;
-			realmode_lgdt(ctxt->vcpu, size, address);
-			/* Disable writeback. */
-			c->dst.type = OP_NONE;
-			break;
-		case 3: /* lidt/vmmcall */
-			if (c->modrm_mod == 3) {
-				switch (c->modrm_rm) {
-				case 1:
-					rc = kvm_fix_hypercall(ctxt->vcpu);
-					if (rc)
-						goto done;
-					break;
-				default:
-					goto cannot_emulate;
-				}
-			} else {
-				rc = read_descriptor(ctxt, ops, c->src.ptr,
-						     &size, &address,
-						     c->op_bytes);
-				if (rc)
-					goto done;
-				realmode_lidt(ctxt->vcpu, size, address);
-			}
-			/* Disable writeback. */
-			c->dst.type = OP_NONE;
-			break;
-		case 4: /* smsw */
-			c->dst.bytes = 2;
-			c->dst.val = realmode_get_cr(ctxt->vcpu, 0);
-			break;
-		case 6: /* lmsw */
-			realmode_lmsw(ctxt->vcpu, (u16)c->src.val,
-				      &ctxt->eflags);
-			c->dst.type = OP_NONE;
-			break;
-		case 7: /* invlpg*/
-			emulate_invlpg(ctxt->vcpu, memop);
-			/* Disable writeback. */
-			c->dst.type = OP_NONE;
-			break;
-		default:
-			goto cannot_emulate;
-		}
-		break;
-	case 0x05: 		/* syscall */
-		if (emulate_syscall(ctxt) == -1)
-			goto cannot_emulate;
-		else
-			goto writeback;
-		break;
-	case 0x06:
-		emulate_clts(ctxt->vcpu);
-		c->dst.type = OP_NONE;
-		break;
-	case 0x08:		/* invd */
-	case 0x09:		/* wbinvd */
-	case 0x0d:		/* GrpP (prefetch) */
-	case 0x18:		/* Grp16 (prefetch/nop) */
-		c->dst.type = OP_NONE;
-		break;
-	case 0x20: /* mov cr, reg */
-		if (c->modrm_mod != 3)
-			goto cannot_emulate;
-		c->regs[c->modrm_rm] =
-				realmode_get_cr(ctxt->vcpu, c->modrm_reg);
-		c->dst.type = OP_NONE;	/* no writeback */
-		break;
-	case 0x21: /* mov from dr to reg */
-		if (c->modrm_mod != 3)
-			goto cannot_emulate;
-		rc = emulator_get_dr(ctxt, c->modrm_reg, &c->regs[c->modrm_rm]);
-		if (rc)
-			goto cannot_emulate;
-		c->dst.type = OP_NONE;	/* no writeback */
-		break;
-	case 0x22: /* mov reg, cr */
-		if (c->modrm_mod != 3)
-			goto cannot_emulate;
-		realmode_set_cr(ctxt->vcpu,
-				c->modrm_reg, c->modrm_val, &ctxt->eflags);
-		c->dst.type = OP_NONE;
-		break;
-	case 0x23: /* mov from reg to dr */
-		if (c->modrm_mod != 3)
-			goto cannot_emulate;
-		rc = emulator_set_dr(ctxt, c->modrm_reg,
-				     c->regs[c->modrm_rm]);
-		if (rc)
-			goto cannot_emulate;
-		c->dst.type = OP_NONE;	/* no writeback */
-		break;
-	case 0x30:
-		/* wrmsr */
-		msr_data = (u32)c->regs[VCPU_REGS_RAX]
-			| ((u64)c->regs[VCPU_REGS_RDX] << 32);
-		rc = kvm_set_msr(ctxt->vcpu, c->regs[VCPU_REGS_RCX], msr_data);
-		if (rc) {
-			kvm_inject_gp(ctxt->vcpu, 0);
-			c->eip = kvm_rip_read(ctxt->vcpu);
-		}
-		rc = X86EMUL_CONTINUE;
-		c->dst.type = OP_NONE;
-		break;
-	case 0x32:
-		/* rdmsr */
-		rc = kvm_get_msr(ctxt->vcpu, c->regs[VCPU_REGS_RCX], &msr_data);
-		if (rc) {
-			kvm_inject_gp(ctxt->vcpu, 0);
-			c->eip = kvm_rip_read(ctxt->vcpu);
-		} else {
-			c->regs[VCPU_REGS_RAX] = (u32)msr_data;
-			c->regs[VCPU_REGS_RDX] = msr_data >> 32;
-		}
-		rc = X86EMUL_CONTINUE;
-		c->dst.type = OP_NONE;
-		break;
-	case 0x34:		/* sysenter */
-		if (emulate_sysenter(ctxt) == -1)
-			goto cannot_emulate;
-		else
-			goto writeback;
-		break;
-	case 0x35:		/* sysexit */
-		if (emulate_sysexit(ctxt) == -1)
-			goto cannot_emulate;
-		else
-			goto writeback;
-		break;
-	case 0x40 ... 0x4f:	/* cmov */
-		c->dst.val = c->dst.orig_val = c->src.val;
-		if (!test_cc(c->b, ctxt->eflags))
-			c->dst.type = OP_NONE; /* no writeback */
-		break;
-	case 0x80 ... 0x8f: /* jnz rel, etc*/
-		if (test_cc(c->b, ctxt->eflags))
-			jmp_rel(c, c->src.val);
-		c->dst.type = OP_NONE;
-		break;
-	case 0xa3:
-	      bt:		/* bt */
-		c->dst.type = OP_NONE;
-		/* only subword offset */
-		c->src.val &= (c->dst.bytes << 3) - 1;
-		emulate_2op_SrcV_nobyte("bt", c->src, c->dst, ctxt->eflags);
-		break;
-	case 0xa4: /* shld imm8, r, r/m */
-	case 0xa5: /* shld cl, r, r/m */
-		emulate_2op_cl("shld", c->src2, c->src, c->dst, ctxt->eflags);
-		break;
-	case 0xab:
-	      bts:		/* bts */
-		/* only subword offset */
-		c->src.val &= (c->dst.bytes << 3) - 1;
-		emulate_2op_SrcV_nobyte("bts", c->src, c->dst, ctxt->eflags);
-		break;
-	case 0xac: /* shrd imm8, r, r/m */
-	case 0xad: /* shrd cl, r, r/m */
-		emulate_2op_cl("shrd", c->src2, c->src, c->dst, ctxt->eflags);
-		break;
-	case 0xae:              /* clflush */
-		break;
-	case 0xb0 ... 0xb1:	/* cmpxchg */
-		/*
-		 * Save real source value, then compare EAX against
-		 * destination.
-		 */
-		c->src.orig_val = c->src.val;
-		c->src.val = c->regs[VCPU_REGS_RAX];
-		emulate_2op_SrcV("cmp", c->src, c->dst, ctxt->eflags);
-		if (ctxt->eflags & EFLG_ZF) {
-			/* Success: write back to memory. */
-			c->dst.val = c->src.orig_val;
-		} else {
-			/* Failure: write the value we saw to EAX. */
-			c->dst.type = OP_REG;
-			c->dst.ptr = (unsigned long *)&c->regs[VCPU_REGS_RAX];
-		}
-		break;
-	case 0xb3:
-	      btr:		/* btr */
-		/* only subword offset */
-		c->src.val &= (c->dst.bytes << 3) - 1;
-		emulate_2op_SrcV_nobyte("btr", c->src, c->dst, ctxt->eflags);
-		break;
-	case 0xb6 ... 0xb7:	/* movzx */
-		c->dst.bytes = c->op_bytes;
-		c->dst.val = (c->d & ByteOp) ? (u8) c->src.val
-						       : (u16) c->src.val;
-		break;
-	case 0xba:		/* Grp8 */
-		switch (c->modrm_reg & 3) {
-		case 0:
-			goto bt;
-		case 1:
-			goto bts;
-		case 2:
-			goto btr;
-		case 3:
-			goto btc;
-		}
-		break;
-	case 0xbb:
-	      btc:		/* btc */
-		/* only subword offset */
-		c->src.val &= (c->dst.bytes << 3) - 1;
-		emulate_2op_SrcV_nobyte("btc", c->src, c->dst, ctxt->eflags);
-		break;
-	case 0xbe ... 0xbf:	/* movsx */
-		c->dst.bytes = c->op_bytes;
-		c->dst.val = (c->d & ByteOp) ? (s8) c->src.val :
-							(s16) c->src.val;
-		break;
-	case 0xc3:		/* movnti */
-		c->dst.bytes = c->op_bytes;
-		c->dst.val = (c->op_bytes == 4) ? (u32) c->src.val :
-							(u64) c->src.val;
-		break;
-	case 0xc7:		/* Grp9 (cmpxchg8b) */
-		rc = emulate_grp9(ctxt, ops, memop);
-		if (rc != 0)
-			goto done;
-		c->dst.type = OP_NONE;
-		break;
-	}
-	goto writeback;
-
-cannot_emulate:
-	DPRINTF("Cannot emulate %02x\n", c->b);
-	c->eip = saved_eip;
-	return -1;
-}
-- 
cgit v1.2.3


From 27c238106862fb0dd3e229c48c1ef56502b0ec88 Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Sun, 16 Aug 2009 15:31:11 +0300
Subject: KVM: Add __KERNEL__ guards to exported headers

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/ia64/include/asm/kvm_para.h | 4 ++++
 arch/s390/include/asm/kvm_para.h | 4 ++++
 2 files changed, 8 insertions(+)

(limited to 'arch')

diff --git a/arch/ia64/include/asm/kvm_para.h b/arch/ia64/include/asm/kvm_para.h
index 0d6d8ca07b8..1588aee781a 100644
--- a/arch/ia64/include/asm/kvm_para.h
+++ b/arch/ia64/include/asm/kvm_para.h
@@ -19,9 +19,13 @@
  *
  */
 
+#ifdef __KERNEL__
+
 static inline unsigned int kvm_arch_para_features(void)
 {
 	return 0;
 }
 
 #endif
+
+#endif
diff --git a/arch/s390/include/asm/kvm_para.h b/arch/s390/include/asm/kvm_para.h
index 2c503796b61..6964db226f8 100644
--- a/arch/s390/include/asm/kvm_para.h
+++ b/arch/s390/include/asm/kvm_para.h
@@ -13,6 +13,8 @@
 #ifndef __S390_KVM_PARA_H
 #define __S390_KVM_PARA_H
 
+#ifdef __KERNEL__
+
 /*
  * Hypercalls for KVM on s390. The calling convention is similar to the
  * s390 ABI, so we use R2-R6 for parameters 1-5. In addition we use R1
@@ -147,4 +149,6 @@ static inline unsigned int kvm_arch_para_features(void)
 	return 0;
 }
 
+#endif
+
 #endif /* __S390_KVM_PARA_H */
-- 
cgit v1.2.3


From fa6870c6b64214aced218d930ec7221e2a9767b8 Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Sun, 16 Aug 2009 15:31:33 +0300
Subject: KVM: Add missing #include

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/include/asm/kvm_para.h | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/include/asm/kvm_para.h b/arch/x86/include/asm/kvm_para.h
index b8a3305ae09..c584076a47f 100644
--- a/arch/x86/include/asm/kvm_para.h
+++ b/arch/x86/include/asm/kvm_para.h
@@ -1,6 +1,8 @@
 #ifndef _ASM_X86_KVM_PARA_H
 #define _ASM_X86_KVM_PARA_H
 
+#include <linux/types.h>
+
 /* This CPUID returns the signature 'KVMKVMKVM' in ebx, ecx, and edx.  It
  * should be used to determine that a VM is running under KVM.
  */
-- 
cgit v1.2.3


From 7bdb588827265bf42dd420e95d34275c83603568 Mon Sep 17 00:00:00 2001
From: Mohammed Gamal <m.gamal005@gmail.com>
Date: Wed, 19 Aug 2009 01:26:28 +0300
Subject: KVM: x86 emulator: Add adc and sbb missing decoder flags

Add missing decoder flags for adc and sbb instructions
(opcodes 0x14-0x15, 0x1c-0x1d)

Signed-off-by: Mohammed Gamal <m.gamal005@gmail.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/emulate.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c
index 2eb807a7b62..1be5cd640e9 100644
--- a/arch/x86/kvm/emulate.c
+++ b/arch/x86/kvm/emulate.c
@@ -100,11 +100,11 @@ static u32 opcode_table[256] = {
 	/* 0x10 - 0x17 */
 	ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
 	ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
-	0, 0, 0, 0,
+	ByteOp | DstAcc | SrcImm, DstAcc | SrcImm, 0, 0,
 	/* 0x18 - 0x1F */
 	ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
 	ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
-	0, 0, 0, 0,
+	ByteOp | DstAcc | SrcImm, DstAcc | SrcImm, 0, 0,
 	/* 0x20 - 0x27 */
 	ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
 	ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
-- 
cgit v1.2.3


From d9048d3278ed4d395e63899257c3fa377693968b Mon Sep 17 00:00:00 2001
From: Mikhail Ershov <Mike.Ershov@gmail.com>
Date: Wed, 19 Aug 2009 14:08:07 +0400
Subject: KVM: Use kvm_{read,write}_guest_virt() to read and write segment
 descriptors

Segment descriptors tables can be placed on two non-contiguous pages.
This patch makes reading segment descriptors by linear address.

Signed-off-by: Mikhail Ershov <Mike.Ershov@gmail.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/x86.c | 10 ++--------
 1 file changed, 2 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index c0e942747b0..59a8ba4d56b 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -4021,7 +4021,6 @@ static void get_segment_descriptor_dtable(struct kvm_vcpu *vcpu,
 static int load_guest_segment_descriptor(struct kvm_vcpu *vcpu, u16 selector,
 					 struct desc_struct *seg_desc)
 {
-	gpa_t gpa;
 	struct descriptor_table dtable;
 	u16 index = selector >> 3;
 
@@ -4031,16 +4030,13 @@ static int load_guest_segment_descriptor(struct kvm_vcpu *vcpu, u16 selector,
 		kvm_queue_exception_e(vcpu, GP_VECTOR, selector & 0xfffc);
 		return 1;
 	}
-	gpa = vcpu->arch.mmu.gva_to_gpa(vcpu, dtable.base);
-	gpa += index * 8;
-	return kvm_read_guest(vcpu->kvm, gpa, seg_desc, 8);
+	return kvm_read_guest_virt(dtable.base + index*8, seg_desc, sizeof(*seg_desc), vcpu);
 }
 
 /* allowed just for 8 bytes segments */
 static int save_guest_segment_descriptor(struct kvm_vcpu *vcpu, u16 selector,
 					 struct desc_struct *seg_desc)
 {
-	gpa_t gpa;
 	struct descriptor_table dtable;
 	u16 index = selector >> 3;
 
@@ -4048,9 +4044,7 @@ static int save_guest_segment_descriptor(struct kvm_vcpu *vcpu, u16 selector,
 
 	if (dtable.limit < index * 8 + 7)
 		return 1;
-	gpa = vcpu->arch.mmu.gva_to_gpa(vcpu, dtable.base);
-	gpa += index * 8;
-	return kvm_write_guest(vcpu->kvm, gpa, seg_desc, 8);
+	return kvm_write_guest_virt(dtable.base + index*8, seg_desc, sizeof(*seg_desc), vcpu);
 }
 
 static u32 get_tss_base_addr(struct kvm_vcpu *vcpu,
-- 
cgit v1.2.3


From 95eb84a7588d7d7afd3096807efc052adc7479e1 Mon Sep 17 00:00:00 2001
From: Sheng Yang <sheng@linux.intel.com>
Date: Wed, 19 Aug 2009 09:52:18 +0800
Subject: KVM: VMX: Fix EPT with WP bit change during paging

QNX update WP bit when paging enabled, which is not covered yet. This one fix
QNX boot with EPT.

Cc: stable@kernel.org
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/vmx.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 2b7e7bd190f..1ee811cef23 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -1642,7 +1642,6 @@ static void ept_update_paging_mode_cr0(unsigned long *hw_cr0,
 			      CPU_BASED_CR3_STORE_EXITING));
 		vcpu->arch.cr0 = cr0;
 		vmx_set_cr4(vcpu, vcpu->arch.cr4);
-		*hw_cr0 &= ~X86_CR0_WP;
 	} else if (!is_paging(vcpu)) {
 		/* From nonpaging to paging */
 		vmcs_write32(CPU_BASED_VM_EXEC_CONTROL,
@@ -1651,9 +1650,10 @@ static void ept_update_paging_mode_cr0(unsigned long *hw_cr0,
 			       CPU_BASED_CR3_STORE_EXITING));
 		vcpu->arch.cr0 = cr0;
 		vmx_set_cr4(vcpu, vcpu->arch.cr4);
-		if (!(vcpu->arch.cr0 & X86_CR0_WP))
-			*hw_cr0 &= ~X86_CR0_WP;
 	}
+
+	if (!(cr0 & X86_CR0_WP))
+		*hw_cr0 &= ~X86_CR0_WP;
 }
 
 static void ept_update_paging_mode_cr4(unsigned long *hw_cr4,
-- 
cgit v1.2.3


From 88c808fd42b53a7e01a2ac3253ef31fef74cb5af Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Mon, 17 Aug 2009 22:49:40 +0300
Subject: KVM: Protect update_cr8_intercept() when running without an apic

update_cr8_intercept() can be triggered from userspace while there
is no apic present.

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/x86.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 59a8ba4d56b..35e7fc54de3 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -3500,6 +3500,9 @@ static void update_cr8_intercept(struct kvm_vcpu *vcpu)
 	if (!kvm_x86_ops->update_cr8_intercept)
 		return;
 
+	if (!vcpu->arch.apic)
+		return;
+
 	if (!vcpu->arch.apic->vapic_addr)
 		max_irr = kvm_lapic_find_highest_irr(vcpu);
 	else
-- 
cgit v1.2.3


From 60f24784a92c25c269a5e741a8ce8ff63e887be8 Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Thu, 27 Aug 2009 13:37:06 +0300
Subject: KVM: Optimize kvm_mmu_unprotect_page_virt() for tdp

We know no pages are protected, so we can short-circuit the whole thing
(including fairly nasty guest memory accesses).

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/mmu.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 6f38178af92..eca41ae9f45 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -2694,6 +2694,9 @@ int kvm_mmu_unprotect_page_virt(struct kvm_vcpu *vcpu, gva_t gva)
 	gpa_t gpa;
 	int r;
 
+	if (tdp_enabled)
+		return 0;
+
 	gpa = vcpu->arch.mmu.gva_to_gpa(vcpu, gva);
 
 	spin_lock(&vcpu->kvm->mmu_lock);
-- 
cgit v1.2.3


From 5fff7d270bd6a4759b6d663741b729cdee370257 Mon Sep 17 00:00:00 2001
From: Gleb Natapov <gleb@redhat.com>
Date: Thu, 27 Aug 2009 18:41:30 +0300
Subject: KVM: VMX: Fix cr8 exiting control clobbering by EPT

Don't call adjust_vmx_controls() two times for the same control.
It restores options that were dropped earlier.  This loses us the cr8
exit control, which causes a massive performance regression Windows x64.

Cc: stable@kernel.org
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/vmx.c | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 1ee811cef23..eec04129402 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -1262,12 +1262,9 @@ static __init int setup_vmcs_config(struct vmcs_config *vmcs_conf)
 	if (_cpu_based_2nd_exec_control & SECONDARY_EXEC_ENABLE_EPT) {
 		/* CR3 accesses and invlpg don't need to cause VM Exits when EPT
 		   enabled */
-		min &= ~(CPU_BASED_CR3_LOAD_EXITING |
-			 CPU_BASED_CR3_STORE_EXITING |
-			 CPU_BASED_INVLPG_EXITING);
-		if (adjust_vmx_controls(min, opt, MSR_IA32_VMX_PROCBASED_CTLS,
-					&_cpu_based_exec_control) < 0)
-			return -EIO;
+		_cpu_based_exec_control &= ~(CPU_BASED_CR3_LOAD_EXITING |
+					     CPU_BASED_CR3_STORE_EXITING |
+					     CPU_BASED_INVLPG_EXITING);
 		rdmsr(MSR_IA32_VMX_EPT_VPID_CAP,
 		      vmx_capability.ept, vmx_capability.vpid);
 	}
-- 
cgit v1.2.3


From a20316d2aa41a8f4fd171648bad8f044f6060826 Mon Sep 17 00:00:00 2001
From: Glauber Costa <glommer@redhat.com>
Date: Mon, 31 Aug 2009 03:04:31 -0400
Subject: KVM guest: fix bogus wallclock physical address calculation

The use of __pa() to calculate the address of a C-visible symbol
is wrong, and can lead to unpredictable results. See arch/x86/include/asm/page.h
for details.

It should be replaced with __pa_symbol(), that does the correct math here,
by taking relocations into account.  This ensures the correct wallclock data
structure physical address is passed to the hypervisor.

Cc: stable@kernel.org
Signed-off-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kernel/kvmclock.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/kvmclock.c b/arch/x86/kernel/kvmclock.c
index 223af43f152..e5efcdcca31 100644
--- a/arch/x86/kernel/kvmclock.c
+++ b/arch/x86/kernel/kvmclock.c
@@ -50,8 +50,8 @@ static unsigned long kvm_get_wallclock(void)
 	struct timespec ts;
 	int low, high;
 
-	low = (int)__pa(&wall_clock);
-	high = ((u64)__pa(&wall_clock) >> 32);
+	low = (int)__pa_symbol(&wall_clock);
+	high = ((u64)__pa_symbol(&wall_clock) >> 32);
 	native_write_msr(MSR_KVM_WALL_CLOCK, low, high);
 
 	vcpu_time = &get_cpu_var(hv_clock);
-- 
cgit v1.2.3


From 76c36d016a3f958d6231dcdef54a132614c3b578 Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Thu, 10 Sep 2009 05:55:17 -0700
Subject: sparc64: Provide extern decls for sparc_??u_type strings.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/include/asm/system_64.h | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'arch')

diff --git a/arch/sparc/include/asm/system_64.h b/arch/sparc/include/asm/system_64.h
index 6c077816ab2..25e848f0cad 100644
--- a/arch/sparc/include/asm/system_64.h
+++ b/arch/sparc/include/asm/system_64.h
@@ -29,6 +29,10 @@ enum sparc_cpu {
 /* This cannot ever be a sun4c :) That's just history. */
 #define ARCH_SUN4C 0
 
+extern const char *sparc_cpu_type;
+extern const char *sparc_fpu_type;
+extern const char *sparc_pmu_type;
+
 extern char reboot_command[];
 
 /* These are here in an effort to more fully work around Spitfire Errata
-- 
cgit v1.2.3


From 2d0740c4562493b60f59ca9b0330a2d5e01d43ec Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Thu, 10 Sep 2009 05:56:16 -0700
Subject: sparc64: Use nmi_enter() and nmi_exit(), as needed.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/kernel/nmi.c | 5 +++++
 1 file changed, 5 insertions(+)

(limited to 'arch')

diff --git a/arch/sparc/kernel/nmi.c b/arch/sparc/kernel/nmi.c
index 47a465fe3c3..7de19dd30f4 100644
--- a/arch/sparc/kernel/nmi.c
+++ b/arch/sparc/kernel/nmi.c
@@ -84,6 +84,7 @@ static void die_nmi(const char *str, struct pt_regs *regs, int do_panic)
 	if (do_panic || panic_on_oops)
 		panic("Non maskable interrupt");
 
+	nmi_exit();
 	local_irq_enable();
 	do_exit(SIGBUS);
 }
@@ -98,6 +99,8 @@ notrace __kprobes void perfctr_irq(int irq, struct pt_regs *regs)
 
 	local_cpu_data().__nmi_count++;
 
+	nmi_enter();
+
 	if (notify_die(DIE_NMI, "nmi", regs, 0,
 		       pt_regs_trap_type(regs), SIGINT) == NOTIFY_STOP)
 		touched = 1;
@@ -120,6 +123,8 @@ notrace __kprobes void perfctr_irq(int irq, struct pt_regs *regs)
 		write_pic(picl_value(nmi_hz));
 		pcr_ops->write(pcr_enable);
 	}
+
+	nmi_exit();
 }
 
 static inline unsigned int get_nmi_count(int cpu)
-- 
cgit v1.2.3


From 5686f9c3d67d5a20108fa26105c98b042df13123 Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Thu, 10 Sep 2009 05:59:24 -0700
Subject: sparc64: Implement a real set_perf_counter_pending().

When the perf counter subsystem needs to reschedule work out
from an NMI, it invokes set_perf_counter_pending().

This triggers a non-NMI irq which should invoke
perf_counter_do_pending().

Currently this won't trigger because sparc64 won't trigger
the perf counter subsystem from NMIs, but when the HW counter
support is added it will.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/include/asm/perf_counter.h |  2 +-
 arch/sparc/kernel/pcr.c               | 14 +++++++++++++-
 2 files changed, 14 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/sparc/include/asm/perf_counter.h b/arch/sparc/include/asm/perf_counter.h
index f07c587a830..38d64454643 100644
--- a/arch/sparc/include/asm/perf_counter.h
+++ b/arch/sparc/include/asm/perf_counter.h
@@ -1,7 +1,7 @@
 #ifndef __ASM_SPARC_PERF_COUNTER_H
 #define __ASM_SPARC_PERF_COUNTER_H
 
-static inline void set_perf_counter_pending(void) { }
+extern void set_perf_counter_pending(void);
 
 #define	PERF_COUNTER_INDEX_OFFSET	0
 
diff --git a/arch/sparc/kernel/pcr.c b/arch/sparc/kernel/pcr.c
index 1ae8cdd7e70..68ff0010707 100644
--- a/arch/sparc/kernel/pcr.c
+++ b/arch/sparc/kernel/pcr.c
@@ -7,6 +7,8 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 
+#include <linux/perf_counter.h>
+
 #include <asm/pil.h>
 #include <asm/pcr.h>
 #include <asm/nmi.h>
@@ -34,10 +36,20 @@ unsigned int picl_shift;
  */
 void deferred_pcr_work_irq(int irq, struct pt_regs *regs)
 {
+	struct pt_regs *old_regs;
+
 	clear_softint(1 << PIL_DEFERRED_PCR_WORK);
+
+	old_regs = set_irq_regs(regs);
+	irq_enter();
+#ifdef CONFIG_PERF_COUNTERS
+	perf_counter_do_pending();
+#endif
+	irq_exit();
+	set_irq_regs(old_regs);
 }
 
-void schedule_deferred_pcr_work(void)
+void set_perf_counter_pending(void)
 {
 	set_softint(1 << PIL_DEFERRED_PCR_WORK);
 }
-- 
cgit v1.2.3


From 59abbd1e7cfd6018fb8e58a96aa562aaff8711e7 Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Thu, 10 Sep 2009 06:28:20 -0700
Subject: sparc64: Initial hw perf counter support.

Only supports one simple counter and only UltraSPARC-IIIi chips.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/include/asm/nmi.h          |   3 +
 arch/sparc/include/asm/perf_counter.h |   6 +
 arch/sparc/kernel/Makefile            |   3 +
 arch/sparc/kernel/nmi.c               |   8 +-
 arch/sparc/kernel/perf_counter.c      | 520 ++++++++++++++++++++++++++++++++++
 5 files changed, 538 insertions(+), 2 deletions(-)
 create mode 100644 arch/sparc/kernel/perf_counter.c

(limited to 'arch')

diff --git a/arch/sparc/include/asm/nmi.h b/arch/sparc/include/asm/nmi.h
index c7d11e435df..72e6500e7ab 100644
--- a/arch/sparc/include/asm/nmi.h
+++ b/arch/sparc/include/asm/nmi.h
@@ -7,4 +7,7 @@ extern void nmi_adjust_hz(unsigned int new_hz);
 
 extern atomic_t nmi_active;
 
+extern void start_nmi_watchdog(void *unused);
+extern void stop_nmi_watchdog(void *unused);
+
 #endif /* __NMI_H */
diff --git a/arch/sparc/include/asm/perf_counter.h b/arch/sparc/include/asm/perf_counter.h
index 38d64454643..5d7a8ca0e49 100644
--- a/arch/sparc/include/asm/perf_counter.h
+++ b/arch/sparc/include/asm/perf_counter.h
@@ -5,4 +5,10 @@ extern void set_perf_counter_pending(void);
 
 #define	PERF_COUNTER_INDEX_OFFSET	0
 
+#ifdef CONFIG_PERF_COUNTERS
+extern void init_hw_perf_counters(void);
+#else
+static inline void init_hw_perf_counters(void)	{ }
+#endif
+
 #endif
diff --git a/arch/sparc/kernel/Makefile b/arch/sparc/kernel/Makefile
index b0041756c9f..f96dc5761f7 100644
--- a/arch/sparc/kernel/Makefile
+++ b/arch/sparc/kernel/Makefile
@@ -103,3 +103,6 @@ obj-$(CONFIG_SUN_LDOMS) += ldc.o vio.o viohs.o ds.o
 obj-$(CONFIG_AUDIT)     += audit.o
 audit--$(CONFIG_AUDIT)  := compat_audit.o
 obj-$(CONFIG_COMPAT)    += $(audit--y)
+
+pc--$(CONFIG_PERF_COUNTERS) := perf_counter.o
+obj-$(CONFIG_SPARC64)	+= $(pc--y)
diff --git a/arch/sparc/kernel/nmi.c b/arch/sparc/kernel/nmi.c
index 7de19dd30f4..391a6ed9a18 100644
--- a/arch/sparc/kernel/nmi.c
+++ b/arch/sparc/kernel/nmi.c
@@ -19,6 +19,7 @@
 #include <linux/delay.h>
 #include <linux/smp.h>
 
+#include <asm/perf_counter.h>
 #include <asm/ptrace.h>
 #include <asm/local.h>
 #include <asm/pcr.h>
@@ -156,7 +157,7 @@ static void report_broken_nmi(int cpu, int *prev_nmi_count)
 	atomic_dec(&nmi_active);
 }
 
-static void stop_nmi_watchdog(void *unused)
+void stop_nmi_watchdog(void *unused)
 {
 	pcr_ops->write(PCR_PIC_PRIV);
 	__get_cpu_var(wd_enabled) = 0;
@@ -210,7 +211,7 @@ error:
 	return err;
 }
 
-static void start_nmi_watchdog(void *unused)
+void start_nmi_watchdog(void *unused)
 {
 	__get_cpu_var(wd_enabled) = 1;
 	atomic_inc(&nmi_active);
@@ -263,6 +264,9 @@ int __init nmi_init(void)
 			atomic_set(&nmi_active, -1);
 		}
 	}
+	if (!err)
+		init_hw_perf_counters();
+
 	return err;
 }
 
diff --git a/arch/sparc/kernel/perf_counter.c b/arch/sparc/kernel/perf_counter.c
new file mode 100644
index 00000000000..f2c781450d0
--- /dev/null
+++ b/arch/sparc/kernel/perf_counter.c
@@ -0,0 +1,520 @@
+/* Performance counter support for sparc64.
+ *
+ * Copyright (C) 2009 David S. Miller <davem@davemloft.net>
+ *
+ * This code is based almost entirely upon the x86 perf counter
+ * code, which is:
+ *
+ *  Copyright (C) 2008 Thomas Gleixner <tglx@linutronix.de>
+ *  Copyright (C) 2008-2009 Red Hat, Inc., Ingo Molnar
+ *  Copyright (C) 2009 Jaswinder Singh Rajput
+ *  Copyright (C) 2009 Advanced Micro Devices, Inc., Robert Richter
+ *  Copyright (C) 2008-2009 Red Hat, Inc., Peter Zijlstra <pzijlstr@redhat.com>
+ */
+
+#include <linux/perf_counter.h>
+#include <linux/kprobes.h>
+#include <linux/kernel.h>
+#include <linux/kdebug.h>
+#include <linux/mutex.h>
+
+#include <asm/cpudata.h>
+#include <asm/atomic.h>
+#include <asm/nmi.h>
+#include <asm/pcr.h>
+
+/* Sparc64 chips have two performance counters, 32-bits each, with
+ * overflow interrupts generated on transition from 0xffffffff to 0.
+ * The counters are accessed in one go using a 64-bit register.
+ *
+ * Both counters are controlled using a single control register.  The
+ * only way to stop all sampling is to clear all of the context (user,
+ * supervisor, hypervisor) sampling enable bits.  But these bits apply
+ * to both counters, thus the two counters can't be enabled/disabled
+ * individually.
+ *
+ * The control register has two event fields, one for each of the two
+ * counters.  It's thus nearly impossible to have one counter going
+ * while keeping the other one stopped.  Therefore it is possible to
+ * get overflow interrupts for counters not currently "in use" and
+ * that condition must be checked in the overflow interrupt handler.
+ *
+ * So we use a hack, in that we program inactive counters with the
+ * "sw_count0" and "sw_count1" events.  These count how many times
+ * the instruction "sethi %hi(0xfc000), %g0" is executed.  It's an
+ * unusual way to encode a NOP and therefore will not trigger in
+ * normal code.
+ */
+
+#define MAX_HWCOUNTERS			2
+#define MAX_PERIOD			((1UL << 32) - 1)
+
+#define PIC_UPPER_INDEX			0
+#define PIC_LOWER_INDEX			1
+
+#define PIC_UPPER_NOP			0x1c
+#define PIC_LOWER_NOP			0x14
+
+struct cpu_hw_counters {
+	struct perf_counter	*counters[MAX_HWCOUNTERS];
+	unsigned long		used_mask[BITS_TO_LONGS(MAX_HWCOUNTERS)];
+	unsigned long		active_mask[BITS_TO_LONGS(MAX_HWCOUNTERS)];
+	int enabled;
+};
+DEFINE_PER_CPU(struct cpu_hw_counters, cpu_hw_counters) = { .enabled = 1, };
+
+struct perf_event_map {
+	u16	encoding;
+	u8	pic_mask;
+#define PIC_NONE	0x00
+#define PIC_UPPER	0x01
+#define PIC_LOWER	0x02
+};
+
+struct sparc_pmu {
+	const struct perf_event_map	*(*event_map)(int);
+	int				max_events;
+	int				upper_shift;
+	int				lower_shift;
+	int				event_mask;
+};
+
+static const struct perf_event_map ultra3i_perfmon_event_map[] = {
+	[PERF_COUNT_HW_CPU_CYCLES] = { 0x0000, PIC_UPPER | PIC_LOWER },
+	[PERF_COUNT_HW_INSTRUCTIONS] = { 0x0001, PIC_UPPER | PIC_LOWER },
+	[PERF_COUNT_HW_CACHE_REFERENCES] = { 0x0009, PIC_LOWER },
+	[PERF_COUNT_HW_CACHE_MISSES] = { 0x0009, PIC_UPPER },
+};
+
+static const struct perf_event_map *ultra3i_event_map(int event)
+{
+	return &ultra3i_perfmon_event_map[event];
+}
+
+static const struct sparc_pmu ultra3i_pmu = {
+	.event_map	= ultra3i_event_map,
+	.max_events	= ARRAY_SIZE(ultra3i_perfmon_event_map),
+	.upper_shift	= 11,
+	.lower_shift	= 4,
+	.event_mask	= 0x3f,
+};
+
+static const struct sparc_pmu *sparc_pmu __read_mostly;
+
+static u64 event_encoding(u64 event, int idx)
+{
+	if (idx == PIC_UPPER_INDEX)
+		event <<= sparc_pmu->upper_shift;
+	else
+		event <<= sparc_pmu->lower_shift;
+	return event;
+}
+
+static u64 mask_for_index(int idx)
+{
+	return event_encoding(sparc_pmu->event_mask, idx);
+}
+
+static u64 nop_for_index(int idx)
+{
+	return event_encoding(idx == PIC_UPPER_INDEX ?
+			      PIC_UPPER_NOP : PIC_LOWER_NOP, idx);
+}
+
+static inline void sparc_pmu_enable_counter(struct hw_perf_counter *hwc,
+					    int idx)
+{
+	u64 val, mask = mask_for_index(idx);
+
+	val = pcr_ops->read();
+	pcr_ops->write((val & ~mask) | hwc->config);
+}
+
+static inline void sparc_pmu_disable_counter(struct hw_perf_counter *hwc,
+					     int idx)
+{
+	u64 mask = mask_for_index(idx);
+	u64 nop = nop_for_index(idx);
+	u64 val = pcr_ops->read();
+
+	pcr_ops->write((val & ~mask) | nop);
+}
+
+void hw_perf_enable(void)
+{
+	struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters);
+	u64 val;
+	int i;
+
+	if (cpuc->enabled)
+		return;
+
+	cpuc->enabled = 1;
+	barrier();
+
+	val = pcr_ops->read();
+
+	for (i = 0; i < MAX_HWCOUNTERS; i++) {
+		struct perf_counter *cp = cpuc->counters[i];
+		struct hw_perf_counter *hwc;
+
+		if (!cp)
+			continue;
+		hwc = &cp->hw;
+		val |= hwc->config_base;
+	}
+
+	pcr_ops->write(val);
+}
+
+void hw_perf_disable(void)
+{
+	struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters);
+	u64 val;
+
+	if (!cpuc->enabled)
+		return;
+
+	cpuc->enabled = 0;
+
+	val = pcr_ops->read();
+	val &= ~(PCR_UTRACE | PCR_STRACE);
+	pcr_ops->write(val);
+}
+
+static u32 read_pmc(int idx)
+{
+	u64 val;
+
+	read_pic(val);
+	if (idx == PIC_UPPER_INDEX)
+		val >>= 32;
+
+	return val & 0xffffffff;
+}
+
+static void write_pmc(int idx, u64 val)
+{
+	u64 shift, mask, pic;
+
+	shift = 0;
+	if (idx == PIC_UPPER_INDEX)
+		shift = 32;
+
+	mask = ((u64) 0xffffffff) << shift;
+	val <<= shift;
+
+	read_pic(pic);
+	pic &= ~mask;
+	pic |= val;
+	write_pic(pic);
+}
+
+static int sparc_perf_counter_set_period(struct perf_counter *counter,
+					 struct hw_perf_counter *hwc, int idx)
+{
+	s64 left = atomic64_read(&hwc->period_left);
+	s64 period = hwc->sample_period;
+	int ret = 0;
+
+	if (unlikely(left <= -period)) {
+		left = period;
+		atomic64_set(&hwc->period_left, left);
+		hwc->last_period = period;
+		ret = 1;
+	}
+
+	if (unlikely(left <= 0)) {
+		left += period;
+		atomic64_set(&hwc->period_left, left);
+		hwc->last_period = period;
+		ret = 1;
+	}
+	if (left > MAX_PERIOD)
+		left = MAX_PERIOD;
+
+	atomic64_set(&hwc->prev_count, (u64)-left);
+
+	write_pmc(idx, (u64)(-left) & 0xffffffff);
+
+	perf_counter_update_userpage(counter);
+
+	return ret;
+}
+
+static int sparc_pmu_enable(struct perf_counter *counter)
+{
+	struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters);
+	struct hw_perf_counter *hwc = &counter->hw;
+	int idx = hwc->idx;
+
+	if (test_and_set_bit(idx, cpuc->used_mask))
+		return -EAGAIN;
+
+	sparc_pmu_disable_counter(hwc, idx);
+
+	cpuc->counters[idx] = counter;
+	set_bit(idx, cpuc->active_mask);
+
+	sparc_perf_counter_set_period(counter, hwc, idx);
+	sparc_pmu_enable_counter(hwc, idx);
+	perf_counter_update_userpage(counter);
+	return 0;
+}
+
+static u64 sparc_perf_counter_update(struct perf_counter *counter,
+				     struct hw_perf_counter *hwc, int idx)
+{
+	int shift = 64 - 32;
+	u64 prev_raw_count, new_raw_count;
+	s64 delta;
+
+again:
+	prev_raw_count = atomic64_read(&hwc->prev_count);
+	new_raw_count = read_pmc(idx);
+
+	if (atomic64_cmpxchg(&hwc->prev_count, prev_raw_count,
+			     new_raw_count) != prev_raw_count)
+		goto again;
+
+	delta = (new_raw_count << shift) - (prev_raw_count << shift);
+	delta >>= shift;
+
+	atomic64_add(delta, &counter->count);
+	atomic64_sub(delta, &hwc->period_left);
+
+	return new_raw_count;
+}
+
+static void sparc_pmu_disable(struct perf_counter *counter)
+{
+	struct cpu_hw_counters *cpuc = &__get_cpu_var(cpu_hw_counters);
+	struct hw_perf_counter *hwc = &counter->hw;
+	int idx = hwc->idx;
+
+	clear_bit(idx, cpuc->active_mask);
+	sparc_pmu_disable_counter(hwc, idx);
+
+	barrier();
+
+	sparc_perf_counter_update(counter, hwc, idx);
+	cpuc->counters[idx] = NULL;
+	clear_bit(idx, cpuc->used_mask);
+
+	perf_counter_update_userpage(counter);
+}
+
+static void sparc_pmu_read(struct perf_counter *counter)
+{
+	struct hw_perf_counter *hwc = &counter->hw;
+	sparc_perf_counter_update(counter, hwc, hwc->idx);
+}
+
+static void sparc_pmu_unthrottle(struct perf_counter *counter)
+{
+	struct hw_perf_counter *hwc = &counter->hw;
+	sparc_pmu_enable_counter(hwc, hwc->idx);
+}
+
+static atomic_t active_counters = ATOMIC_INIT(0);
+static DEFINE_MUTEX(pmc_grab_mutex);
+
+void perf_counter_grab_pmc(void)
+{
+	if (atomic_inc_not_zero(&active_counters))
+		return;
+
+	mutex_lock(&pmc_grab_mutex);
+	if (atomic_read(&active_counters) == 0) {
+		if (atomic_read(&nmi_active) > 0) {
+			on_each_cpu(stop_nmi_watchdog, NULL, 1);
+			BUG_ON(atomic_read(&nmi_active) != 0);
+		}
+		atomic_inc(&active_counters);
+	}
+	mutex_unlock(&pmc_grab_mutex);
+}
+
+void perf_counter_release_pmc(void)
+{
+	if (atomic_dec_and_mutex_lock(&active_counters, &pmc_grab_mutex)) {
+		if (atomic_read(&nmi_active) == 0)
+			on_each_cpu(start_nmi_watchdog, NULL, 1);
+		mutex_unlock(&pmc_grab_mutex);
+	}
+}
+
+static void hw_perf_counter_destroy(struct perf_counter *counter)
+{
+	perf_counter_release_pmc();
+}
+
+static int __hw_perf_counter_init(struct perf_counter *counter)
+{
+	struct perf_counter_attr *attr = &counter->attr;
+	struct hw_perf_counter *hwc = &counter->hw;
+	const struct perf_event_map *pmap;
+	u64 enc;
+
+	if (atomic_read(&nmi_active) < 0)
+		return -ENODEV;
+
+	if (attr->type != PERF_TYPE_HARDWARE)
+		return -EOPNOTSUPP;
+
+	if (attr->config >= sparc_pmu->max_events)
+		return -EINVAL;
+
+	perf_counter_grab_pmc();
+	counter->destroy = hw_perf_counter_destroy;
+
+	/* We save the enable bits in the config_base.  So to
+	 * turn off sampling just write 'config', and to enable
+	 * things write 'config | config_base'.
+	 */
+	hwc->config_base = 0;
+	if (!attr->exclude_user)
+		hwc->config_base |= PCR_UTRACE;
+	if (!attr->exclude_kernel)
+		hwc->config_base |= PCR_STRACE;
+
+	if (!hwc->sample_period) {
+		hwc->sample_period = MAX_PERIOD;
+		hwc->last_period = hwc->sample_period;
+		atomic64_set(&hwc->period_left, hwc->sample_period);
+	}
+
+	pmap = sparc_pmu->event_map(attr->config);
+
+	enc = pmap->encoding;
+	if (pmap->pic_mask & PIC_UPPER) {
+		hwc->idx = PIC_UPPER_INDEX;
+		enc <<= sparc_pmu->upper_shift;
+	} else {
+		hwc->idx = PIC_LOWER_INDEX;
+		enc <<= sparc_pmu->lower_shift;
+	}
+
+	hwc->config |= enc;
+	return 0;
+}
+
+static const struct pmu pmu = {
+	.enable		= sparc_pmu_enable,
+	.disable	= sparc_pmu_disable,
+	.read		= sparc_pmu_read,
+	.unthrottle	= sparc_pmu_unthrottle,
+};
+
+const struct pmu *hw_perf_counter_init(struct perf_counter *counter)
+{
+	int err = __hw_perf_counter_init(counter);
+
+	if (err)
+		return ERR_PTR(err);
+	return &pmu;
+}
+
+void perf_counter_print_debug(void)
+{
+	unsigned long flags;
+	u64 pcr, pic;
+	int cpu;
+
+	if (!sparc_pmu)
+		return;
+
+	local_irq_save(flags);
+
+	cpu = smp_processor_id();
+
+	pcr = pcr_ops->read();
+	read_pic(pic);
+
+	pr_info("\n");
+	pr_info("CPU#%d: PCR[%016llx] PIC[%016llx]\n",
+		cpu, pcr, pic);
+
+	local_irq_restore(flags);
+}
+
+static int __kprobes perf_counter_nmi_handler(struct notifier_block *self,
+					      unsigned long cmd, void *__args)
+{
+	struct die_args *args = __args;
+	struct perf_sample_data data;
+	struct cpu_hw_counters *cpuc;
+	struct pt_regs *regs;
+	int idx;
+
+	if (!atomic_read(&active_counters))
+		return NOTIFY_DONE;
+
+	switch (cmd) {
+	case DIE_NMI:
+		break;
+
+	default:
+		return NOTIFY_DONE;
+	}
+
+	regs = args->regs;
+
+	data.regs = regs;
+	data.addr = 0;
+
+	cpuc = &__get_cpu_var(cpu_hw_counters);
+	for (idx = 0; idx < MAX_HWCOUNTERS; idx++) {
+		struct perf_counter *counter = cpuc->counters[idx];
+		struct hw_perf_counter *hwc;
+		u64 val;
+
+		if (!test_bit(idx, cpuc->active_mask))
+			continue;
+		hwc = &counter->hw;
+		val = sparc_perf_counter_update(counter, hwc, idx);
+		if (val & (1ULL << 31))
+			continue;
+
+		data.period = counter->hw.last_period;
+		if (!sparc_perf_counter_set_period(counter, hwc, idx))
+			continue;
+
+		if (perf_counter_overflow(counter, 1, &data))
+			sparc_pmu_disable_counter(hwc, idx);
+	}
+
+	return NOTIFY_STOP;
+}
+
+static __read_mostly struct notifier_block perf_counter_nmi_notifier = {
+	.notifier_call		= perf_counter_nmi_handler,
+};
+
+static bool __init supported_pmu(void)
+{
+	if (!strcmp(sparc_pmu_type, "ultra3i")) {
+		sparc_pmu = &ultra3i_pmu;
+		return true;
+	}
+	return false;
+}
+
+void __init init_hw_perf_counters(void)
+{
+	pr_info("Performance counters: ");
+
+	if (!supported_pmu()) {
+		pr_cont("No support for PMU type '%s'\n", sparc_pmu_type);
+		return;
+	}
+
+	pr_cont("Supported PMU type is '%s'\n", sparc_pmu_type);
+
+	/* All sparc64 PMUs currently have 2 counters.  But this simple
+	 * driver only supports one active counter at a time.
+	 */
+	perf_max_counters = 1;
+
+	register_die_notifier(&perf_counter_nmi_notifier);
+}
-- 
cgit v1.2.3


From 91b9286d819b821fd742c0053fe0748818374198 Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Thu, 10 Sep 2009 07:09:06 -0700
Subject: sparc64: Provide hypervisor tracing bit support for perf counters.

A PMU need only specify which bit in the PCR enabled hypervisor
tracing in order to enable this.

This will be used in Niagara-2 perf counter support.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/kernel/perf_counter.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/sparc/kernel/perf_counter.c b/arch/sparc/kernel/perf_counter.c
index f2c781450d0..d86009fa6f8 100644
--- a/arch/sparc/kernel/perf_counter.c
+++ b/arch/sparc/kernel/perf_counter.c
@@ -77,6 +77,7 @@ struct sparc_pmu {
 	int				upper_shift;
 	int				lower_shift;
 	int				event_mask;
+	int				hv_bit;
 };
 
 static const struct perf_event_map ultra3i_perfmon_event_map[] = {
@@ -178,7 +179,7 @@ void hw_perf_disable(void)
 	cpuc->enabled = 0;
 
 	val = pcr_ops->read();
-	val &= ~(PCR_UTRACE | PCR_STRACE);
+	val &= ~(PCR_UTRACE | PCR_STRACE | sparc_pmu->hv_bit);
 	pcr_ops->write(val);
 }
 
@@ -377,6 +378,8 @@ static int __hw_perf_counter_init(struct perf_counter *counter)
 		hwc->config_base |= PCR_UTRACE;
 	if (!attr->exclude_kernel)
 		hwc->config_base |= PCR_STRACE;
+	if (!attr->exclude_hv)
+		hwc->config_base |= sparc_pmu->hv_bit;
 
 	if (!hwc->sample_period) {
 		hwc->sample_period = MAX_PERIOD;
-- 
cgit v1.2.3


From 496c07e3b43475124d7f2d77fafbc1f5055abfee Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Thu, 10 Sep 2009 07:10:59 -0700
Subject: sparc64: Provide a way to specify a perf counter overflow IRQ enable
 bit.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/kernel/perf_counter.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/sparc/kernel/perf_counter.c b/arch/sparc/kernel/perf_counter.c
index d86009fa6f8..0cd5487b341 100644
--- a/arch/sparc/kernel/perf_counter.c
+++ b/arch/sparc/kernel/perf_counter.c
@@ -78,6 +78,7 @@ struct sparc_pmu {
 	int				lower_shift;
 	int				event_mask;
 	int				hv_bit;
+	int				irq_bit;
 };
 
 static const struct perf_event_map ultra3i_perfmon_event_map[] = {
@@ -179,7 +180,8 @@ void hw_perf_disable(void)
 	cpuc->enabled = 0;
 
 	val = pcr_ops->read();
-	val &= ~(PCR_UTRACE | PCR_STRACE | sparc_pmu->hv_bit);
+	val &= ~(PCR_UTRACE | PCR_STRACE |
+		 sparc_pmu->hv_bit | sparc_pmu->irq_bit);
 	pcr_ops->write(val);
 }
 
@@ -373,7 +375,7 @@ static int __hw_perf_counter_init(struct perf_counter *counter)
 	 * turn off sampling just write 'config', and to enable
 	 * things write 'config | config_base'.
 	 */
-	hwc->config_base = 0;
+	hwc->config_base = sparc_pmu->irq_bit;
 	if (!attr->exclude_user)
 		hwc->config_base |= PCR_UTRACE;
 	if (!attr->exclude_kernel)
-- 
cgit v1.2.3


From 660d13765f342ecb6e774fcbc35b64beb0a069da Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Thu, 10 Sep 2009 07:13:26 -0700
Subject: sparc64: Perf counter 'nop' event is not constant.

On Niagara-2, for example, it's going to be different.  So make
it something specified in sparc_pmu.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/kernel/perf_counter.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/sparc/kernel/perf_counter.c b/arch/sparc/kernel/perf_counter.c
index 0cd5487b341..f3b8ccca3c9 100644
--- a/arch/sparc/kernel/perf_counter.c
+++ b/arch/sparc/kernel/perf_counter.c
@@ -52,9 +52,6 @@
 #define PIC_UPPER_INDEX			0
 #define PIC_LOWER_INDEX			1
 
-#define PIC_UPPER_NOP			0x1c
-#define PIC_LOWER_NOP			0x14
-
 struct cpu_hw_counters {
 	struct perf_counter	*counters[MAX_HWCOUNTERS];
 	unsigned long		used_mask[BITS_TO_LONGS(MAX_HWCOUNTERS)];
@@ -79,6 +76,8 @@ struct sparc_pmu {
 	int				event_mask;
 	int				hv_bit;
 	int				irq_bit;
+	int				upper_nop;
+	int				lower_nop;
 };
 
 static const struct perf_event_map ultra3i_perfmon_event_map[] = {
@@ -99,6 +98,8 @@ static const struct sparc_pmu ultra3i_pmu = {
 	.upper_shift	= 11,
 	.lower_shift	= 4,
 	.event_mask	= 0x3f,
+	.upper_nop	= 0x1c,
+	.lower_nop	= 0x14,
 };
 
 static const struct sparc_pmu *sparc_pmu __read_mostly;
@@ -120,7 +121,8 @@ static u64 mask_for_index(int idx)
 static u64 nop_for_index(int idx)
 {
 	return event_encoding(idx == PIC_UPPER_INDEX ?
-			      PIC_UPPER_NOP : PIC_LOWER_NOP, idx);
+			      sparc_pmu->upper_nop :
+			      sparc_pmu->lower_nop, idx);
 }
 
 static inline void sparc_pmu_enable_counter(struct hw_perf_counter *hwc,
-- 
cgit v1.2.3


From b73d884756303316ead4cd7dad51236b2a515a1a Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Thu, 10 Sep 2009 07:22:18 -0700
Subject: sparc64: Initial niagara2 perf counter support.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/kernel/perf_counter.c | 30 ++++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

(limited to 'arch')

diff --git a/arch/sparc/kernel/perf_counter.c b/arch/sparc/kernel/perf_counter.c
index f3b8ccca3c9..09de4035eaa 100644
--- a/arch/sparc/kernel/perf_counter.c
+++ b/arch/sparc/kernel/perf_counter.c
@@ -102,6 +102,32 @@ static const struct sparc_pmu ultra3i_pmu = {
 	.lower_nop	= 0x14,
 };
 
+static const struct perf_event_map niagara2_perfmon_event_map[] = {
+	[PERF_COUNT_HW_CPU_CYCLES] = { 0x02ff, PIC_UPPER | PIC_LOWER },
+	[PERF_COUNT_HW_INSTRUCTIONS] = { 0x02ff, PIC_UPPER | PIC_LOWER },
+	[PERF_COUNT_HW_CACHE_REFERENCES] = { 0x0208, PIC_UPPER | PIC_LOWER },
+	[PERF_COUNT_HW_CACHE_MISSES] = { 0x0302, PIC_UPPER | PIC_LOWER },
+	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = { 0x0201, PIC_UPPER | PIC_LOWER },
+	[PERF_COUNT_HW_BRANCH_MISSES] = { 0x0202, PIC_UPPER | PIC_LOWER },
+};
+
+static const struct perf_event_map *niagara2_event_map(int event)
+{
+	return &niagara2_perfmon_event_map[event];
+}
+
+static const struct sparc_pmu niagara2_pmu = {
+	.event_map	= niagara2_event_map,
+	.max_events	= ARRAY_SIZE(niagara2_perfmon_event_map),
+	.upper_shift	= 19,
+	.lower_shift	= 6,
+	.event_mask	= 0xfff,
+	.hv_bit		= 0x8,
+	.irq_bit	= 0x03,
+	.upper_nop	= 0x220,
+	.lower_nop	= 0x220,
+};
+
 static const struct sparc_pmu *sparc_pmu __read_mostly;
 
 static u64 event_encoding(u64 event, int idx)
@@ -504,6 +530,10 @@ static bool __init supported_pmu(void)
 		sparc_pmu = &ultra3i_pmu;
 		return true;
 	}
+	if (!strcmp(sparc_pmu_type, "niagara2")) {
+		sparc_pmu = &niagara2_pmu;
+		return true;
+	}
 	return false;
 }
 
-- 
cgit v1.2.3


From 6ba661787594868512a71c129062ebd57d0c01e7 Mon Sep 17 00:00:00 2001
From: Marcelo Tosatti <mtosatti@redhat.com>
Date: Tue, 25 Aug 2009 01:13:10 -0300
Subject: KVM guest: do not batch pte updates from interrupt context

Commit b8bcfe997e4 made paravirt pte updates synchronous in interrupt
context.

Unfortunately the KVM pv mmu code caches the lazy/nonlazy mode
internally, so a pte update from interrupt context during a lazy mmu
operation can be batched while it should be performed synchronously.

https://bugzilla.redhat.com/show_bug.cgi?id=518022

Drop the internal mode variable and use paravirt_get_lazy_mode(), which
returns the correct state.

Cc: stable@kernel.org
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kernel/kvm.c | 7 +------
 1 file changed, 1 insertion(+), 6 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/kvm.c b/arch/x86/kernel/kvm.c
index c664d515f61..63b0ec8d3d4 100644
--- a/arch/x86/kernel/kvm.c
+++ b/arch/x86/kernel/kvm.c
@@ -34,7 +34,6 @@
 struct kvm_para_state {
 	u8 mmu_queue[MMU_QUEUE_SIZE];
 	int mmu_queue_len;
-	enum paravirt_lazy_mode mode;
 };
 
 static DEFINE_PER_CPU(struct kvm_para_state, para_state);
@@ -77,7 +76,7 @@ static void kvm_deferred_mmu_op(void *buffer, int len)
 {
 	struct kvm_para_state *state = kvm_para_state();
 
-	if (state->mode != PARAVIRT_LAZY_MMU) {
+	if (paravirt_get_lazy_mode() != PARAVIRT_LAZY_MMU) {
 		kvm_mmu_op(buffer, len);
 		return;
 	}
@@ -185,10 +184,7 @@ static void kvm_release_pt(unsigned long pfn)
 
 static void kvm_enter_lazy_mmu(void)
 {
-	struct kvm_para_state *state = kvm_para_state();
-
 	paravirt_enter_lazy_mmu();
-	state->mode = paravirt_get_lazy_mode();
 }
 
 static void kvm_leave_lazy_mmu(void)
@@ -197,7 +193,6 @@ static void kvm_leave_lazy_mmu(void)
 
 	mmu_queue_flush(state);
 	paravirt_leave_lazy_mmu();
-	state->mode = paravirt_get_lazy_mode();
 }
 
 static void __init paravirt_ops_setup(void)
-- 
cgit v1.2.3


From 3d53c27d05950390712f92c5ad1604c60190ed64 Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Tue, 1 Sep 2009 12:34:07 +0300
Subject: KVM: Use thread debug register storage instead of kvm specific data

Instead of saving the debug registers from the processor to a kvm data
structure, rely in the debug registers stored in the thread structure.
This allows us not to save dr6 and dr7.

Reduces lightweight vmexit cost by 350 cycles, or 11 percent.

Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/include/asm/kvm_host.h |  3 ---
 arch/x86/kvm/x86.c              | 22 +++++++---------------
 2 files changed, 7 insertions(+), 18 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index 33901be75a3..e8f166a02c7 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -362,9 +362,6 @@ struct kvm_vcpu_arch {
 	u32 pat;
 
 	int switch_db_regs;
-	unsigned long host_db[KVM_NR_DB_REGS];
-	unsigned long host_dr6;
-	unsigned long host_dr7;
 	unsigned long db[KVM_NR_DB_REGS];
 	unsigned long dr6;
 	unsigned long dr7;
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 35e7fc54de3..3e893c4fdd3 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -3623,14 +3623,7 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 
 	kvm_guest_enter();
 
-	get_debugreg(vcpu->arch.host_dr6, 6);
-	get_debugreg(vcpu->arch.host_dr7, 7);
 	if (unlikely(vcpu->arch.switch_db_regs)) {
-		get_debugreg(vcpu->arch.host_db[0], 0);
-		get_debugreg(vcpu->arch.host_db[1], 1);
-		get_debugreg(vcpu->arch.host_db[2], 2);
-		get_debugreg(vcpu->arch.host_db[3], 3);
-
 		set_debugreg(0, 7);
 		set_debugreg(vcpu->arch.eff_db[0], 0);
 		set_debugreg(vcpu->arch.eff_db[1], 1);
@@ -3641,15 +3634,14 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	trace_kvm_entry(vcpu->vcpu_id);
 	kvm_x86_ops->run(vcpu, kvm_run);
 
-	if (unlikely(vcpu->arch.switch_db_regs)) {
-		set_debugreg(0, 7);
-		set_debugreg(vcpu->arch.host_db[0], 0);
-		set_debugreg(vcpu->arch.host_db[1], 1);
-		set_debugreg(vcpu->arch.host_db[2], 2);
-		set_debugreg(vcpu->arch.host_db[3], 3);
+	if (unlikely(vcpu->arch.switch_db_regs || test_thread_flag(TIF_DEBUG))) {
+		set_debugreg(current->thread.debugreg0, 0);
+		set_debugreg(current->thread.debugreg1, 1);
+		set_debugreg(current->thread.debugreg2, 2);
+		set_debugreg(current->thread.debugreg3, 3);
+		set_debugreg(current->thread.debugreg6, 6);
+		set_debugreg(current->thread.debugreg7, 7);
 	}
-	set_debugreg(vcpu->arch.host_dr6, 6);
-	set_debugreg(vcpu->arch.host_dr7, 7);
 
 	set_bit(KVM_REQ_KICK, &vcpu->requests);
 	local_irq_enable();
-- 
cgit v1.2.3


From e8a48342e9bc1c65ffe4bb3b3ac964e726dbd4c0 Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Tue, 1 Sep 2009 16:06:25 +0300
Subject: KVM: VMX: Conditionally reload debug register 6

Only reload debug register 6 if we're running with the guest's
debug registers.  Saves around 150 cycles from the guest lightweight
exit path.

dr6 contains a couple of bits that are updated on #DB, so intercept
that unconditionally and update those bits then.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
---
 arch/x86/kvm/vmx.c | 14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index eec04129402..f482100eff8 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -540,10 +540,12 @@ static void update_exception_bitmap(struct kvm_vcpu *vcpu)
 	eb = (1u << PF_VECTOR) | (1u << UD_VECTOR) | (1u << MC_VECTOR);
 	if (!vcpu->fpu_active)
 		eb |= 1u << NM_VECTOR;
+	/*
+	 * Unconditionally intercept #DB so we can maintain dr6 without
+	 * reading it every exit.
+	 */
+	eb |= 1u << DB_VECTOR;
 	if (vcpu->guest_debug & KVM_GUESTDBG_ENABLE) {
-		if (vcpu->guest_debug &
-		    (KVM_GUESTDBG_SINGLESTEP | KVM_GUESTDBG_USE_HW_BP))
-			eb |= 1u << DB_VECTOR;
 		if (vcpu->guest_debug & KVM_GUESTDBG_USE_SW_BP)
 			eb |= 1u << BP_VECTOR;
 	}
@@ -3632,7 +3634,8 @@ static void vmx_vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	 */
 	vmcs_writel(HOST_CR0, read_cr0());
 
-	set_debugreg(vcpu->arch.dr6, 6);
+	if (vcpu->arch.switch_db_regs)
+		set_debugreg(vcpu->arch.dr6, 6);
 
 	asm(
 		/* Store host registers */
@@ -3734,7 +3737,8 @@ static void vmx_vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 				  | (1 << VCPU_EXREG_PDPTR));
 	vcpu->arch.regs_dirty = 0;
 
-	get_debugreg(vcpu->arch.dr6, 6);
+	if (vcpu->arch.switch_db_regs)
+		get_debugreg(vcpu->arch.dr6, 6);
 
 	vmx->idt_vectoring_info = vmcs_read32(IDT_VECTORING_INFO_FIELD);
 	if (vmx->rmode.irq.pending)
-- 
cgit v1.2.3


From 542423b0dd162a9dbf91109461703bd0e545c71f Mon Sep 17 00:00:00 2001
From: Gleb Natapov <gleb@redhat.com>
Date: Thu, 27 Aug 2009 15:07:30 +0300
Subject: KVM: VMX: call vmx_load_host_state() only if msr is cached

No need to call it before each kvm_(set|get)_msr_common()

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
---
 arch/x86/kvm/vmx.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index f482100eff8..cc6e00a9f72 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -1007,9 +1007,9 @@ static int vmx_get_msr(struct kvm_vcpu *vcpu, u32 msr_index, u64 *pdata)
 		data = vmcs_readl(GUEST_SYSENTER_ESP);
 		break;
 	default:
-		vmx_load_host_state(to_vmx(vcpu));
 		msr = find_msr_entry(to_vmx(vcpu), msr_index);
 		if (msr) {
+			vmx_load_host_state(to_vmx(vcpu));
 			data = msr->data;
 			break;
 		}
@@ -1066,9 +1066,9 @@ static int vmx_set_msr(struct kvm_vcpu *vcpu, u32 msr_index, u64 data)
 		}
 		/* Otherwise falls through to kvm_set_msr_common */
 	default:
-		vmx_load_host_state(vmx);
 		msr = find_msr_entry(vmx, msr_index);
 		if (msr) {
+			vmx_load_host_state(vmx);
 			msr->data = data;
 			break;
 		}
-- 
cgit v1.2.3


From e3904e6ed0d525e383eb961ed1da0596a10e5387 Mon Sep 17 00:00:00 2001
From: Marcelo Tosatti <mtosatti@redhat.com>
Date: Tue, 8 Sep 2009 14:50:51 -0300
Subject: KVM: x86: drop duplicate kvm_flush_remote_tlb calls

kvm_mmu_slot_remove_write_access already calls it.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
 arch/x86/kvm/x86.c | 2 --
 1 file changed, 2 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 3e893c4fdd3..7627ff607a9 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -2152,7 +2152,6 @@ int kvm_vm_ioctl_get_dirty_log(struct kvm *kvm,
 		spin_lock(&kvm->mmu_lock);
 		kvm_mmu_slot_remove_write_access(kvm, log->slot);
 		spin_unlock(&kvm->mmu_lock);
-		kvm_flush_remote_tlbs(kvm);
 		memslot = &kvm->memslots[log->slot];
 		n = ALIGN(memslot->npages, BITS_PER_LONG) / 8;
 		memset(memslot->dirty_bitmap, 0, n);
@@ -4896,7 +4895,6 @@ int kvm_arch_set_memory_region(struct kvm *kvm,
 
 	kvm_mmu_slot_remove_write_access(kvm, mem->slot);
 	spin_unlock(&kvm->mmu_lock);
-	kvm_flush_remote_tlbs(kvm);
 
 	return 0;
 }
-- 
cgit v1.2.3


From 4da748960a6bd7b1e123e01bfa8f2dbcb6be209e Mon Sep 17 00:00:00 2001
From: Gleb Natapov <gleb@redhat.com>
Date: Thu, 27 Aug 2009 16:25:04 +0300
Subject: KVM: fix misreporting of coalesced interrupts by kvm tracer

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
---
 arch/x86/kvm/lapic.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index 5b9d1ae09ca..1ae5ceba7eb 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -376,7 +376,7 @@ static int __apic_accept_irq(struct kvm_lapic *apic, int delivery_mode,
 
 		result = !apic_test_and_set_irr(vector, apic);
 		trace_kvm_apic_accept_irq(vcpu->vcpu_id, delivery_mode,
-					  trig_mode, vector, result);
+					  trig_mode, vector, !result);
 		if (!result) {
 			if (trig_mode)
 				apic_debug("level trig mode repeatedly for "
-- 
cgit v1.2.3


From 0a79b009525b160081d75cef5dbf45817956acf2 Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@redhat.com>
Date: Tue, 1 Sep 2009 12:03:25 +0300
Subject: KVM: VMX: Check cpl before emulating debug register access

Debug registers may only be accessed from cpl 0.  Unfortunately, vmx will
code to emulate the instruction even though it was issued from guest
userspace, possibly leading to an unexpected trap later.

Cc: stable@kernel.org
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
---
 arch/x86/include/asm/kvm_host.h |  1 +
 arch/x86/kvm/vmx.c              |  2 ++
 arch/x86/kvm/x86.c              | 13 +++++++++++++
 3 files changed, 16 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index e8f166a02c7..3be000435fa 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -620,6 +620,7 @@ void kvm_queue_exception(struct kvm_vcpu *vcpu, unsigned nr);
 void kvm_queue_exception_e(struct kvm_vcpu *vcpu, unsigned nr, u32 error_code);
 void kvm_inject_page_fault(struct kvm_vcpu *vcpu, unsigned long cr2,
 			   u32 error_code);
+bool kvm_require_cpl(struct kvm_vcpu *vcpu, int required_cpl);
 
 int kvm_pic_set_irq(void *opaque, int irq, int level);
 
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index cc6e00a9f72..f3812014bd0 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -2934,6 +2934,8 @@ static int handle_dr(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	unsigned long val;
 	int dr, reg;
 
+	if (!kvm_require_cpl(vcpu, 0))
+		return 1;
 	dr = vmcs_readl(GUEST_DR7);
 	if (dr & DR7_GD) {
 		/*
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 7627ff607a9..4137cc579ba 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -222,6 +222,19 @@ void kvm_queue_exception_e(struct kvm_vcpu *vcpu, unsigned nr, u32 error_code)
 }
 EXPORT_SYMBOL_GPL(kvm_queue_exception_e);
 
+/*
+ * Checks if cpl <= required_cpl; if true, return true.  Otherwise queue
+ * a #GP and return false.
+ */
+bool kvm_require_cpl(struct kvm_vcpu *vcpu, int required_cpl)
+{
+	if (kvm_x86_ops->get_cpl(vcpu) <= required_cpl)
+		return true;
+	kvm_queue_exception_e(vcpu, GP_VECTOR, 0);
+	return false;
+}
+EXPORT_SYMBOL_GPL(kvm_require_cpl);
+
 /*
  * Load the pae pdptrs.  Return true is they are all valid.
  */
-- 
cgit v1.2.3


From 78c86e5e5691fc84d5fbea0cd4ac7147e87b7490 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Date: Thu, 10 Sep 2009 10:09:38 -0700
Subject: x86: split __phys_addr out into separate file

Split __phys_addr out into its own file so we can disable
-fstack-protector in a fine-grained fashion.  Also it doesn't
have terribly much to do with the rest of ioremap.c.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 arch/x86/mm/Makefile   |  4 +--
 arch/x86/mm/ioremap.c  | 72 +-------------------------------------------------
 arch/x86/mm/physaddr.c | 70 ++++++++++++++++++++++++++++++++++++++++++++++++
 arch/x86/mm/physaddr.h | 10 +++++++
 4 files changed, 83 insertions(+), 73 deletions(-)
 create mode 100644 arch/x86/mm/physaddr.c
 create mode 100644 arch/x86/mm/physaddr.h

(limited to 'arch')

diff --git a/arch/x86/mm/Makefile b/arch/x86/mm/Makefile
index 72bb3a26c73..9b5a9f59a47 100644
--- a/arch/x86/mm/Makefile
+++ b/arch/x86/mm/Makefile
@@ -1,9 +1,9 @@
 obj-y	:=  init.o init_$(BITS).o fault.o ioremap.o extable.o pageattr.o mmap.o \
-	    pat.o pgtable.o gup.o
+	    pat.o pgtable.o physaddr.o gup.o
 
 # Make sure __phys_addr has no stackprotector
 nostackp := $(call cc-option, -fno-stack-protector)
-CFLAGS_ioremap.o		:= $(nostackp)
+CFLAGS_physaddr.o		:= $(nostackp)
 
 obj-$(CONFIG_SMP)		+= tlb.o
 
diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c
index 8a450930834..04e1ad60c63 100644
--- a/arch/x86/mm/ioremap.c
+++ b/arch/x86/mm/ioremap.c
@@ -22,77 +22,7 @@
 #include <asm/pgalloc.h>
 #include <asm/pat.h>
 
-static inline int phys_addr_valid(resource_size_t addr)
-{
-#ifdef CONFIG_PHYS_ADDR_T_64BIT
-	return !(addr >> boot_cpu_data.x86_phys_bits);
-#else
-	return 1;
-#endif
-}
-
-#ifdef CONFIG_X86_64
-
-unsigned long __phys_addr(unsigned long x)
-{
-	if (x >= __START_KERNEL_map) {
-		x -= __START_KERNEL_map;
-		VIRTUAL_BUG_ON(x >= KERNEL_IMAGE_SIZE);
-		x += phys_base;
-	} else {
-		VIRTUAL_BUG_ON(x < PAGE_OFFSET);
-		x -= PAGE_OFFSET;
-		VIRTUAL_BUG_ON(!phys_addr_valid(x));
-	}
-	return x;
-}
-EXPORT_SYMBOL(__phys_addr);
-
-bool __virt_addr_valid(unsigned long x)
-{
-	if (x >= __START_KERNEL_map) {
-		x -= __START_KERNEL_map;
-		if (x >= KERNEL_IMAGE_SIZE)
-			return false;
-		x += phys_base;
-	} else {
-		if (x < PAGE_OFFSET)
-			return false;
-		x -= PAGE_OFFSET;
-		if (!phys_addr_valid(x))
-			return false;
-	}
-
-	return pfn_valid(x >> PAGE_SHIFT);
-}
-EXPORT_SYMBOL(__virt_addr_valid);
-
-#else
-
-#ifdef CONFIG_DEBUG_VIRTUAL
-unsigned long __phys_addr(unsigned long x)
-{
-	/* VMALLOC_* aren't constants  */
-	VIRTUAL_BUG_ON(x < PAGE_OFFSET);
-	VIRTUAL_BUG_ON(__vmalloc_start_set && is_vmalloc_addr((void *) x));
-	return x - PAGE_OFFSET;
-}
-EXPORT_SYMBOL(__phys_addr);
-#endif
-
-bool __virt_addr_valid(unsigned long x)
-{
-	if (x < PAGE_OFFSET)
-		return false;
-	if (__vmalloc_start_set && is_vmalloc_addr((void *) x))
-		return false;
-	if (x >= FIXADDR_START)
-		return false;
-	return pfn_valid((x - PAGE_OFFSET) >> PAGE_SHIFT);
-}
-EXPORT_SYMBOL(__virt_addr_valid);
-
-#endif
+#include "physaddr.h"
 
 int page_is_ram(unsigned long pagenr)
 {
diff --git a/arch/x86/mm/physaddr.c b/arch/x86/mm/physaddr.c
new file mode 100644
index 00000000000..d2e2735327b
--- /dev/null
+++ b/arch/x86/mm/physaddr.c
@@ -0,0 +1,70 @@
+#include <linux/mmdebug.h>
+#include <linux/module.h>
+#include <linux/mm.h>
+
+#include <asm/page.h>
+
+#include "physaddr.h"
+
+#ifdef CONFIG_X86_64
+
+unsigned long __phys_addr(unsigned long x)
+{
+	if (x >= __START_KERNEL_map) {
+		x -= __START_KERNEL_map;
+		VIRTUAL_BUG_ON(x >= KERNEL_IMAGE_SIZE);
+		x += phys_base;
+	} else {
+		VIRTUAL_BUG_ON(x < PAGE_OFFSET);
+		x -= PAGE_OFFSET;
+		VIRTUAL_BUG_ON(!phys_addr_valid(x));
+	}
+	return x;
+}
+EXPORT_SYMBOL(__phys_addr);
+
+bool __virt_addr_valid(unsigned long x)
+{
+	if (x >= __START_KERNEL_map) {
+		x -= __START_KERNEL_map;
+		if (x >= KERNEL_IMAGE_SIZE)
+			return false;
+		x += phys_base;
+	} else {
+		if (x < PAGE_OFFSET)
+			return false;
+		x -= PAGE_OFFSET;
+		if (!phys_addr_valid(x))
+			return false;
+	}
+
+	return pfn_valid(x >> PAGE_SHIFT);
+}
+EXPORT_SYMBOL(__virt_addr_valid);
+
+#else
+
+#ifdef CONFIG_DEBUG_VIRTUAL
+unsigned long __phys_addr(unsigned long x)
+{
+	/* VMALLOC_* aren't constants  */
+	VIRTUAL_BUG_ON(x < PAGE_OFFSET);
+	VIRTUAL_BUG_ON(__vmalloc_start_set && is_vmalloc_addr((void *) x));
+	return x - PAGE_OFFSET;
+}
+EXPORT_SYMBOL(__phys_addr);
+#endif
+
+bool __virt_addr_valid(unsigned long x)
+{
+	if (x < PAGE_OFFSET)
+		return false;
+	if (__vmalloc_start_set && is_vmalloc_addr((void *) x))
+		return false;
+	if (x >= FIXADDR_START)
+		return false;
+	return pfn_valid((x - PAGE_OFFSET) >> PAGE_SHIFT);
+}
+EXPORT_SYMBOL(__virt_addr_valid);
+
+#endif	/* CONFIG_X86_64 */
diff --git a/arch/x86/mm/physaddr.h b/arch/x86/mm/physaddr.h
new file mode 100644
index 00000000000..a3cd5a0c97b
--- /dev/null
+++ b/arch/x86/mm/physaddr.h
@@ -0,0 +1,10 @@
+#include <asm/processor.h>
+
+static inline int phys_addr_valid(resource_size_t addr)
+{
+#ifdef CONFIG_PHYS_ADDR_T_64BIT
+	return !(addr >> boot_cpu_data.x86_phys_bits);
+#else
+	return 1;
+#endif
+}
-- 
cgit v1.2.3


From 5367b6887e7d8c870a5da7d9b8c6e9c207684e43 Mon Sep 17 00:00:00 2001
From: Ben Hutchings <ben@decadent.org.uk>
Date: Thu, 10 Sep 2009 02:53:50 +0100
Subject: x86: Fix code patching for paravirt-alternatives on 486

As reported in <http://bugs.debian.org/511703> and
<http://bugs.debian.org/515982>, kernels with paravirt-alternatives
enabled crash in text_poke_early() on at least some 486-class
processors.

The problem is that text_poke_early() itself uses inline functions
affected by paravirt-alternatives and so will modify instructions that
have already been prefetched.  Pentium and later processors will
invalidate the prefetched instructions in this case, but 486-class
processors do not.

Change sync_core() to limit prefetching on 486-class (and 386-class)
processors, and move the call to sync_core() above the call to the
modifiable local_irq_restore().

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
LKML-Reference: <1252547631.3423.134.camel@localhost>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/include/asm/processor.h | 16 +++++++++++++---
 arch/x86/kernel/alternative.c    |  2 +-
 2 files changed, 14 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index c7768269b1c..2db56c57a28 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -703,13 +703,23 @@ static inline void cpu_relax(void)
 	rep_nop();
 }
 
-/* Stop speculative execution: */
+/* Stop speculative execution and prefetching of modified code. */
 static inline void sync_core(void)
 {
 	int tmp;
 
-	asm volatile("cpuid" : "=a" (tmp) : "0" (1)
-		     : "ebx", "ecx", "edx", "memory");
+#if defined(CONFIG_M386) || defined(CONFIG_M486)
+	if (boot_cpu_data.x86 < 5)
+		/* There is no speculative execution.
+		 * jmp is a barrier to prefetching. */
+		asm volatile("jmp 1f\n1:\n" ::: "memory");
+	else
+#endif
+		/* cpuid is a barrier to speculative execution.
+		 * Prefetched instructions are automatically
+		 * invalidated when modified. */
+		asm volatile("cpuid" : "=a" (tmp) : "0" (1)
+			     : "ebx", "ecx", "edx", "memory");
 }
 
 static inline void __monitor(const void *eax, unsigned long ecx,
diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c
index f5765870257..b8ebd0b689b 100644
--- a/arch/x86/kernel/alternative.c
+++ b/arch/x86/kernel/alternative.c
@@ -490,8 +490,8 @@ void *text_poke_early(void *addr, const void *opcode, size_t len)
 	unsigned long flags;
 	local_irq_save(flags);
 	memcpy(addr, opcode, len);
-	local_irq_restore(flags);
 	sync_core();
+	local_irq_restore(flags);
 	/* Could also do a CLFLUSH here to speed up CPU recovery; but
 	   that causes hangs on some VIA CPUs. */
 	return addr;
-- 
cgit v1.2.3


From 8708d002c416b8bf87351bc626d15d7407896edb Mon Sep 17 00:00:00 2001
From: Wolfram Sang <w.sang@pengutronix.de>
Date: Thu, 10 Sep 2009 12:47:20 +0000
Subject: powerpc/irq: Improve nanodoc

The OF helpers look like nanodoc but are missing the header. Fix this and a
typo (s/nad/and/) while we are here.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/irq.h | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/irq.h b/arch/powerpc/include/asm/irq.h
index 0a5137676e1..bbcd1aaf3df 100644
--- a/arch/powerpc/include/asm/irq.h
+++ b/arch/powerpc/include/asm/irq.h
@@ -302,7 +302,8 @@ extern void irq_free_virt(unsigned int virq, unsigned int count);
 
 /* -- OF helpers -- */
 
-/* irq_create_of_mapping - Map a hardware interrupt into linux virq space
+/**
+ * irq_create_of_mapping - Map a hardware interrupt into linux virq space
  * @controller: Device node of the interrupt controller
  * @inspec: Interrupt specifier from the device-tree
  * @intsize: Size of the interrupt specifier from the device-tree
@@ -314,8 +315,8 @@ extern void irq_free_virt(unsigned int virq, unsigned int count);
 extern unsigned int irq_create_of_mapping(struct device_node *controller,
 					  u32 *intspec, unsigned int intsize);
 
-
-/* irq_of_parse_and_map - Parse nad Map an interrupt into linux virq space
+/**
+ * irq_of_parse_and_map - Parse and Map an interrupt into linux virq space
  * @device: Device node of the device whose interrupt is to be mapped
  * @index: Index of the interrupt to map
  *
-- 
cgit v1.2.3


From 757cbd46d11cfa7506b7dd5dd6657ae645bf6a17 Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@kernel.crashing.org>
Date: Tue, 8 Sep 2009 17:38:52 +0000
Subject: powerpc/85xx: Fix SMP compile error and allow NULL for smp_ops

The following commit introduced a compile error since it removed
the implementation of smp_85xx_basic_setup:

commit 77c0a700c1c292edafa11c1e52821ce4636f81b0
Author: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date:   Fri Aug 28 14:25:04 2009 +1000

    powerpc: Properly start decrementer on BookE secondary CPUs

Make it so that smp_ops probe() and setup_cpu() can be set to NULL.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/smp.c         | 10 +++++++---
 arch/powerpc/platforms/85xx/smp.c | 10 ----------
 2 files changed, 7 insertions(+), 13 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index 96f107cc016..d387b3937cc 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -269,7 +269,10 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 	cpu_callin_map[boot_cpuid] = 1;
 
 	if (smp_ops)
-		max_cpus = smp_ops->probe();
+		if (smp_ops->probe)
+			max_cpus = smp_ops->probe();
+		else
+			max_cpus = NR_CPUS;
 	else
 		max_cpus = 1;
  
@@ -493,7 +496,8 @@ int __devinit start_secondary(void *unused)
 	preempt_disable();
 	cpu_callin_map[cpu] = 1;
 
-	smp_ops->setup_cpu(cpu);
+	if (smp_ops->setup_cpu)
+		smp_ops->setup_cpu(cpu);
 	if (smp_ops->take_timebase)
 		smp_ops->take_timebase();
 
@@ -556,7 +560,7 @@ void __init smp_cpus_done(unsigned int max_cpus)
 	old_mask = current->cpus_allowed;
 	set_cpus_allowed(current, cpumask_of_cpu(boot_cpuid));
 	
-	if (smp_ops)
+	if (smp_ops && smp_ops->setup_cpu)
 		smp_ops->setup_cpu(boot_cpuid);
 
 	set_cpus_allowed(current, old_mask);
diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c
index 94f901da491..04160a4cc69 100644
--- a/arch/powerpc/platforms/85xx/smp.c
+++ b/arch/powerpc/platforms/85xx/smp.c
@@ -88,25 +88,15 @@ struct smp_ops_t smp_85xx_ops = {
 	.kick_cpu = smp_85xx_kick_cpu,
 };
 
-static int __init smp_dummy_probe(void)
-{
-	return NR_CPUS;
-}
-
 void __init mpc85xx_smp_init(void)
 {
 	struct device_node *np;
 
-	smp_85xx_ops.message_pass = NULL;
-
 	np = of_find_node_by_type(NULL, "open-pic");
 	if (np) {
 		smp_85xx_ops.probe = smp_mpic_probe;
 		smp_85xx_ops.setup_cpu = smp_85xx_setup_cpu;
 		smp_85xx_ops.message_pass = smp_mpic_message_pass;
-	} else {
-		smp_85xx_ops.probe = smp_dummy_probe;
-		smp_85xx_ops.setup_cpu = smp_85xx_basic_setup;
 	}
 
 	if (cpu_has_feature(CPU_FTR_DBELL))
-- 
cgit v1.2.3


From a6dbf93a2ad853585409e715eb96dca9177e3c39 Mon Sep 17 00:00:00 2001
From: Paul Mackerras <paulus@samba.org>
Date: Wed, 9 Sep 2009 01:26:03 +0000
Subject: powerpc: Fix bug where perf_counters breaks oprofile

Currently there is a bug where if you use oprofile on a pSeries
machine, then use perf_counters, then use oprofile again, oprofile
will not work correctly; it will lose the PMU configuration the next
time the hypervisor does a partition context switch, and thereafter
won't count anything.

Maynard Johnson identified the sequence causing the problem:
- oprofile setup calls ppc_enable_pmcs(), which calls
  pseries_lpar_enable_pmcs, which tells the hypervisor that we want
  to use the PMU, and sets the "PMU in use" flag in the lppaca.
  This flag tells the hypervisor whether it needs to save and restore
  the PMU config.
- The perf_counter code sets and clears the "PMU in use" flag directly
  as it context-switches the PMU between tasks, and leaves it clear
  when it finishes.
- oprofile setup, called for a new oprofile run, calls ppc_enable_pmcs,
  which does nothing because it has already been called.  In particular
  it doesn't set the "PMU in use" flag.

This fixes the problem by arranging for ppc_enable_pmcs to always set
the "PMU in use" flag.  It makes the perf_counter code call
ppc_enable_pmcs also rather than calling the lower-level function
directly, and removes the setting of the "PMU in use" flag from
pseries_lpar_enable_pmcs, since that is now done in its caller.

This also removes the declaration of pasemi_enable_pmcs because it
isn't defined anywhere.

Reported-by: Maynard Johnson <mpjohn@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Cc: <stable@kernel.org)
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/pmc.h         | 16 ++++++++++++++--
 arch/powerpc/kernel/perf_counter.c     | 13 +++----------
 arch/powerpc/kernel/sysfs.c            |  3 +++
 arch/powerpc/platforms/pseries/setup.c |  4 ----
 4 files changed, 20 insertions(+), 16 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/pmc.h b/arch/powerpc/include/asm/pmc.h
index d6a616a1b3e..ccc68b50d05 100644
--- a/arch/powerpc/include/asm/pmc.h
+++ b/arch/powerpc/include/asm/pmc.h
@@ -27,10 +27,22 @@ extern perf_irq_t perf_irq;
 
 int reserve_pmc_hardware(perf_irq_t new_perf_irq);
 void release_pmc_hardware(void);
+void ppc_enable_pmcs(void);
 
 #ifdef CONFIG_PPC64
-void power4_enable_pmcs(void);
-void pasemi_enable_pmcs(void);
+#include <asm/lppaca.h>
+
+static inline void ppc_set_pmu_inuse(int inuse)
+{
+	get_lppaca()->pmcregs_in_use = inuse;
+}
+
+extern void power4_enable_pmcs(void);
+
+#else /* CONFIG_PPC64 */
+
+static inline void ppc_set_pmu_inuse(int inuse) { }
+
 #endif
 
 #endif /* __KERNEL__ */
diff --git a/arch/powerpc/kernel/perf_counter.c b/arch/powerpc/kernel/perf_counter.c
index 70e1f57f7dd..ccd6b213564 100644
--- a/arch/powerpc/kernel/perf_counter.c
+++ b/arch/powerpc/kernel/perf_counter.c
@@ -62,7 +62,6 @@ static inline unsigned long perf_ip_adjust(struct pt_regs *regs)
 {
 	return 0;
 }
-static inline void perf_set_pmu_inuse(int inuse) { }
 static inline void perf_get_data_addr(struct pt_regs *regs, u64 *addrp) { }
 static inline u32 perf_get_misc_flags(struct pt_regs *regs)
 {
@@ -93,11 +92,6 @@ static inline unsigned long perf_ip_adjust(struct pt_regs *regs)
 	return 0;
 }
 
-static inline void perf_set_pmu_inuse(int inuse)
-{
-	get_lppaca()->pmcregs_in_use = inuse;
-}
-
 /*
  * The user wants a data address recorded.
  * If we're not doing instruction sampling, give them the SDAR
@@ -531,8 +525,7 @@ void hw_perf_disable(void)
 		 * Check if we ever enabled the PMU on this cpu.
 		 */
 		if (!cpuhw->pmcs_enabled) {
-			if (ppc_md.enable_pmcs)
-				ppc_md.enable_pmcs();
+			ppc_enable_pmcs();
 			cpuhw->pmcs_enabled = 1;
 		}
 
@@ -594,7 +587,7 @@ void hw_perf_enable(void)
 		mtspr(SPRN_MMCRA, cpuhw->mmcr[2] & ~MMCRA_SAMPLE_ENABLE);
 		mtspr(SPRN_MMCR1, cpuhw->mmcr[1]);
 		if (cpuhw->n_counters == 0)
-			perf_set_pmu_inuse(0);
+			ppc_set_pmu_inuse(0);
 		goto out_enable;
 	}
 
@@ -627,7 +620,7 @@ void hw_perf_enable(void)
 	 * bit set and set the hardware counters to their initial values.
 	 * Then unfreeze the counters.
 	 */
-	perf_set_pmu_inuse(1);
+	ppc_set_pmu_inuse(1);
 	mtspr(SPRN_MMCRA, cpuhw->mmcr[2] & ~MMCRA_SAMPLE_ENABLE);
 	mtspr(SPRN_MMCR1, cpuhw->mmcr[1]);
 	mtspr(SPRN_MMCR0, (cpuhw->mmcr[0] & ~(MMCR0_PMC1CE | MMCR0_PMCjCE))
diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c
index f41aec85aa4..956ab33fd73 100644
--- a/arch/powerpc/kernel/sysfs.c
+++ b/arch/powerpc/kernel/sysfs.c
@@ -17,6 +17,7 @@
 #include <asm/prom.h>
 #include <asm/machdep.h>
 #include <asm/smp.h>
+#include <asm/pmc.h>
 
 #include "cacheinfo.h"
 
@@ -123,6 +124,8 @@ static DEFINE_PER_CPU(char, pmcs_enabled);
 
 void ppc_enable_pmcs(void)
 {
+	ppc_set_pmu_inuse(1);
+
 	/* Only need to enable them once */
 	if (__get_cpu_var(pmcs_enabled))
 		return;
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index 8d75ea21296..ca5f2e10972 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -223,10 +223,6 @@ static void pseries_lpar_enable_pmcs(void)
 	set = 1UL << 63;
 	reset = 0;
 	plpar_hcall_norets(H_PERFMON, set, reset);
-
-	/* instruct hypervisor to maintain PMCs */
-	if (firmware_has_feature(FW_FEATURE_SPLPAR))
-		get_lppaca()->pmcregs_in_use = 1;
 }
 
 static void __init pseries_discover_pic(void)
-- 
cgit v1.2.3


From e51ee31e8af22948dcc3b115978469b09c96c3fd Mon Sep 17 00:00:00 2001
From: Paul Mackerras <paulus@samba.org>
Date: Wed, 9 Sep 2009 20:28:49 +0000
Subject: powerpc/perf_counters: Reduce stack usage of power_check_constraints

Michael Ellerman reported stack-frame size warnings being produced
for power_check_constraints(), which uses an 8*8 array of u64 and
two 8*8 arrays of unsigned long, which are currently allocated on the
stack, along with some other smaller variables.  These arrays come
to 1.5kB on 64-bit or 1kB on 32-bit, which is a bit too much for the
stack.

This fixes the problem by putting these arrays in the existing
per-cpu cpu_hw_counters struct.  This is OK because two of the call
sites have interrupts disabled already; for the third call site we
use get_cpu_var, which disables preemption, so we know we won't
get a context switch while we're in power_check_constraints().
Note that power_check_constraints() can be called during context
switch but is not called from interrupts.

Reported-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Cc: <stable@kernel.org)
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/perf_counter.c | 55 ++++++++++++++++++++++----------------
 1 file changed, 32 insertions(+), 23 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/perf_counter.c b/arch/powerpc/kernel/perf_counter.c
index ccd6b213564..7ceefaf3a7f 100644
--- a/arch/powerpc/kernel/perf_counter.c
+++ b/arch/powerpc/kernel/perf_counter.c
@@ -32,6 +32,9 @@ struct cpu_hw_counters {
 	unsigned long mmcr[3];
 	struct perf_counter *limited_counter[MAX_LIMITED_HWCOUNTERS];
 	u8  limited_hwidx[MAX_LIMITED_HWCOUNTERS];
+	u64 alternatives[MAX_HWCOUNTERS][MAX_EVENT_ALTERNATIVES];
+	unsigned long amasks[MAX_HWCOUNTERS][MAX_EVENT_ALTERNATIVES];
+	unsigned long avalues[MAX_HWCOUNTERS][MAX_EVENT_ALTERNATIVES];
 };
 DEFINE_PER_CPU(struct cpu_hw_counters, cpu_hw_counters);
 
@@ -239,13 +242,11 @@ static void write_pmc(int idx, unsigned long val)
  * and see if any combination of alternative codes is feasible.
  * The feasible set is returned in event[].
  */
-static int power_check_constraints(u64 event[], unsigned int cflags[],
+static int power_check_constraints(struct cpu_hw_counters *cpuhw,
+				   u64 event[], unsigned int cflags[],
 				   int n_ev)
 {
 	unsigned long mask, value, nv;
-	u64 alternatives[MAX_HWCOUNTERS][MAX_EVENT_ALTERNATIVES];
-	unsigned long amasks[MAX_HWCOUNTERS][MAX_EVENT_ALTERNATIVES];
-	unsigned long avalues[MAX_HWCOUNTERS][MAX_EVENT_ALTERNATIVES];
 	unsigned long smasks[MAX_HWCOUNTERS], svalues[MAX_HWCOUNTERS];
 	int n_alt[MAX_HWCOUNTERS], choice[MAX_HWCOUNTERS];
 	int i, j;
@@ -260,21 +261,23 @@ static int power_check_constraints(u64 event[], unsigned int cflags[],
 		if ((cflags[i] & PPMU_LIMITED_PMC_REQD)
 		    && !ppmu->limited_pmc_event(event[i])) {
 			ppmu->get_alternatives(event[i], cflags[i],
-					       alternatives[i]);
-			event[i] = alternatives[i][0];
+					       cpuhw->alternatives[i]);
+			event[i] = cpuhw->alternatives[i][0];
 		}
-		if (ppmu->get_constraint(event[i], &amasks[i][0],
-					 &avalues[i][0]))
+		if (ppmu->get_constraint(event[i], &cpuhw->amasks[i][0],
+					 &cpuhw->avalues[i][0]))
 			return -1;
 	}
 	value = mask = 0;
 	for (i = 0; i < n_ev; ++i) {
-		nv = (value | avalues[i][0]) + (value & avalues[i][0] & addf);
+		nv = (value | cpuhw->avalues[i][0]) +
+			(value & cpuhw->avalues[i][0] & addf);
 		if ((((nv + tadd) ^ value) & mask) != 0 ||
-		    (((nv + tadd) ^ avalues[i][0]) & amasks[i][0]) != 0)
+		    (((nv + tadd) ^ cpuhw->avalues[i][0]) &
+		     cpuhw->amasks[i][0]) != 0)
 			break;
 		value = nv;
-		mask |= amasks[i][0];
+		mask |= cpuhw->amasks[i][0];
 	}
 	if (i == n_ev)
 		return 0;	/* all OK */
@@ -285,10 +288,11 @@ static int power_check_constraints(u64 event[], unsigned int cflags[],
 	for (i = 0; i < n_ev; ++i) {
 		choice[i] = 0;
 		n_alt[i] = ppmu->get_alternatives(event[i], cflags[i],
-						  alternatives[i]);
+						  cpuhw->alternatives[i]);
 		for (j = 1; j < n_alt[i]; ++j)
-			ppmu->get_constraint(alternatives[i][j],
-					     &amasks[i][j], &avalues[i][j]);
+			ppmu->get_constraint(cpuhw->alternatives[i][j],
+					     &cpuhw->amasks[i][j],
+					     &cpuhw->avalues[i][j]);
 	}
 
 	/* enumerate all possibilities and see if any will work */
@@ -307,11 +311,11 @@ static int power_check_constraints(u64 event[], unsigned int cflags[],
 		 * where k > j, will satisfy the constraints.
 		 */
 		while (++j < n_alt[i]) {
-			nv = (value | avalues[i][j]) +
-				(value & avalues[i][j] & addf);
+			nv = (value | cpuhw->avalues[i][j]) +
+				(value & cpuhw->avalues[i][j] & addf);
 			if ((((nv + tadd) ^ value) & mask) == 0 &&
-			    (((nv + tadd) ^ avalues[i][j])
-			     & amasks[i][j]) == 0)
+			    (((nv + tadd) ^ cpuhw->avalues[i][j])
+			     & cpuhw->amasks[i][j]) == 0)
 				break;
 		}
 		if (j >= n_alt[i]) {
@@ -333,7 +337,7 @@ static int power_check_constraints(u64 event[], unsigned int cflags[],
 			svalues[i] = value;
 			smasks[i] = mask;
 			value = nv;
-			mask |= amasks[i][j];
+			mask |= cpuhw->amasks[i][j];
 			++i;
 			j = -1;
 		}
@@ -341,7 +345,7 @@ static int power_check_constraints(u64 event[], unsigned int cflags[],
 
 	/* OK, we have a feasible combination, tell the caller the solution */
 	for (i = 0; i < n_ev; ++i)
-		event[i] = alternatives[i][choice[i]];
+		event[i] = cpuhw->alternatives[i][choice[i]];
 	return 0;
 }
 
@@ -745,7 +749,7 @@ int hw_perf_group_sched_in(struct perf_counter *group_leader,
 		return -EAGAIN;
 	if (check_excludes(cpuhw->counter, cpuhw->flags, n0, n))
 		return -EAGAIN;
-	i = power_check_constraints(cpuhw->events, cpuhw->flags, n + n0);
+	i = power_check_constraints(cpuhw, cpuhw->events, cpuhw->flags, n + n0);
 	if (i < 0)
 		return -EAGAIN;
 	cpuhw->n_counters = n0 + n;
@@ -800,7 +804,7 @@ static int power_pmu_enable(struct perf_counter *counter)
 	cpuhw->flags[n0] = counter->hw.counter_base;
 	if (check_excludes(cpuhw->counter, cpuhw->flags, n0, 1))
 		goto out;
-	if (power_check_constraints(cpuhw->events, cpuhw->flags, n0 + 1))
+	if (power_check_constraints(cpuhw, cpuhw->events, cpuhw->flags, n0 + 1))
 		goto out;
 
 	counter->hw.config = cpuhw->events[n0];
@@ -1005,6 +1009,7 @@ const struct pmu *hw_perf_counter_init(struct perf_counter *counter)
 	unsigned int cflags[MAX_HWCOUNTERS];
 	int n;
 	int err;
+	struct cpu_hw_counters *cpuhw;
 
 	if (!ppmu)
 		return ERR_PTR(-ENXIO);
@@ -1083,7 +1088,11 @@ const struct pmu *hw_perf_counter_init(struct perf_counter *counter)
 	cflags[n] = flags;
 	if (check_excludes(ctrs, cflags, n, 1))
 		return ERR_PTR(-EINVAL);
-	if (power_check_constraints(events, cflags, n + 1))
+
+	cpuhw = &get_cpu_var(cpu_hw_counters);
+	err = power_check_constraints(cpuhw, events, cflags, n + 1);
+	put_cpu_var(cpu_hw_counters);
+	if (err)
 		return ERR_PTR(-EINVAL);
 
 	counter->hw.config = events[n];
-- 
cgit v1.2.3


From c6c9eacef09a94b5866b83556196440aca876702 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Tue, 8 Sep 2009 14:16:58 +0000
Subject: powerpc/booke: Don't set DABR on 64-bit BookE, use DAC1 instead

Also remove a duplicate setting of it in the context switch path
on BookE.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/process.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 678ff132e8b..0a321643305 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -284,14 +284,13 @@ int set_dabr(unsigned long dabr)
 		return ppc_md.set_dabr(dabr);
 
 	/* XXX should we have a CPU_FTR_HAS_DABR ? */
-#if defined(CONFIG_PPC64) || defined(CONFIG_6xx)
-	mtspr(SPRN_DABR, dabr);
-#endif
-
 #if defined(CONFIG_BOOKE)
 	mtspr(SPRN_DAC1, dabr);
+#elif defined(CONFIG_PPC_BOOK3S)
+	mtspr(SPRN_DABR, dabr);
 #endif
 
+
 	return 0;
 }
 
@@ -372,15 +371,16 @@ struct task_struct *__switch_to(struct task_struct *prev,
 
 #endif /* CONFIG_SMP */
 
-	if (unlikely(__get_cpu_var(current_dabr) != new->thread.dabr))
-		set_dabr(new->thread.dabr);
-
 #if defined(CONFIG_BOOKE)
 	/* If new thread DAC (HW breakpoint) is the same then leave it */
 	if (new->thread.dabr)
 		set_dabr(new->thread.dabr);
+#else
+	if (unlikely(__get_cpu_var(current_dabr) != new->thread.dabr))
+		set_dabr(new->thread.dabr);
 #endif
 
+
 	new_thread = &new->thread;
 	old_thread = &current->thread;
 
-- 
cgit v1.2.3


From bd96f37895197563bc1d6d6f7c012b3ae7df1c45 Mon Sep 17 00:00:00 2001
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Date: Fri, 4 Sep 2009 23:46:18 -0700
Subject: Input: pxa27x_keypad - allow modifying keymap from userspace

Tested-by: Mike Rapoport <mike@compulab.co.il>
Acked-by: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 arch/arm/mach-pxa/include/mach/pxa27x_keypad.h | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/arm/mach-pxa/include/mach/pxa27x_keypad.h b/arch/arm/mach-pxa/include/mach/pxa27x_keypad.h
index 63e8965ad85..7b4eadc6df3 100644
--- a/arch/arm/mach-pxa/include/mach/pxa27x_keypad.h
+++ b/arch/arm/mach-pxa/include/mach/pxa27x_keypad.h
@@ -6,6 +6,8 @@
 
 #define MAX_MATRIX_KEY_ROWS	(8)
 #define MAX_MATRIX_KEY_COLS	(8)
+#define MATRIX_ROW_SHIFT	(3)
+#define MAX_DIRECT_KEY_NUM	(8)
 
 /* pxa3xx keypad platform specific parameters
  *
@@ -34,7 +36,7 @@ struct pxa27x_keypad_platform_data {
 
 	/* direct keys */
 	int		direct_key_num;
-	unsigned int	direct_key_map[8];
+	unsigned int	direct_key_map[MAX_DIRECT_KEY_NUM];
 
 	/* rotary encoders 0 */
 	int		enable_rotary0;
-- 
cgit v1.2.3


From 1d6ed32226326a6e6cd67cd9ee4294bcbb0c9a15 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Fri, 11 Sep 2009 15:36:09 +1000
Subject: powerpc/iseries: Fix oops reading from /proc/iSeries/mf/*/cmdline

That code uses dma_mapping_error() with a NULL device, which is
a bad idea :-) The proper fix might be to start using some kind
of pseudo device for all these low level mappings with the
hypervisor but that will be for another day. Since it directly
calls into the low level iommu code, I see no problem in having
it directly test against DMA_ERROR_CODE instead of using the
accessors with a NULL argument for now.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/platforms/iseries/mf.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/platforms/iseries/mf.c b/arch/powerpc/platforms/iseries/mf.c
index fef4d515051..0d9343df35b 100644
--- a/arch/powerpc/platforms/iseries/mf.c
+++ b/arch/powerpc/platforms/iseries/mf.c
@@ -872,7 +872,7 @@ static int proc_mf_dump_cmdline(char *page, char **start, off_t off,
 		count = 256 - off;
 
 	dma_addr = iseries_hv_map(page, off + count, DMA_FROM_DEVICE);
-	if (dma_mapping_error(NULL, dma_addr))
+	if (dma_addr == DMA_ERROR_CODE)
 		return -ENOMEM;
 	memset(page, 0, off + count);
 	memset(&vsp_cmd, 0, sizeof(vsp_cmd));
-- 
cgit v1.2.3


From d331d8305cba713605854aab63a000fb892353a7 Mon Sep 17 00:00:00 2001
From: Martyn Welch <martyn.welch@gefanuc.com>
Date: Thu, 13 Aug 2009 09:03:02 +0100
Subject: powerpc/nvram: Enable use Generic NVRAM driver for different size
 chips

Remove the reliance on a staticly defined NVRAM size, allowing
platforms to support NVRAMs with sizes differing from the standard.

A fall back value is provided for platforms not supporting this extension.

Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/nvram.h | 3 +++
 arch/powerpc/kernel/setup_32.c   | 8 ++++++++
 2 files changed, 11 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/nvram.h b/arch/powerpc/include/asm/nvram.h
index efde5ac82f7..6c587eddee5 100644
--- a/arch/powerpc/include/asm/nvram.h
+++ b/arch/powerpc/include/asm/nvram.h
@@ -107,6 +107,9 @@ extern void	pmac_xpram_write(int xpaddr, u8 data);
 /* Synchronize NVRAM */
 extern void	nvram_sync(void);
 
+/* Determine NVRAM size */
+extern ssize_t nvram_get_size(void);
+
 /* Normal access to NVRAM */
 extern unsigned char nvram_read_byte(int i);
 extern void nvram_write_byte(unsigned char c, int i);
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index e1e3059cf34..53bcf3d792d 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -210,6 +210,14 @@ void nvram_write_byte(unsigned char val, int addr)
 }
 EXPORT_SYMBOL(nvram_write_byte);
 
+ssize_t nvram_get_size(void)
+{
+	if (ppc_md.nvram_size)
+		return ppc_md.nvram_size();
+	return -1;
+}
+EXPORT_SYMBOL(nvram_get_size);
+
 void nvram_sync(void)
 {
 	if (ppc_md.nvram_sync)
-- 
cgit v1.2.3


From 62733e5a5a480a893e56fa6133ae90904d857bc4 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Fri, 11 Sep 2009 10:28:15 +0200
Subject: [S390] cio: move scsw helper functions to header file

All scsw helper functions are very short and usage of them shouldn't
result in function calls. Therefore we move them to a separate header
file.
Also saves a lot of EXPORT_SYMBOLs.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/include/asm/chsc.h |  28 ++
 arch/s390/include/asm/cio.h  | 223 +---------
 arch/s390/include/asm/scsw.h | 956 +++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 985 insertions(+), 222 deletions(-)
 create mode 100644 arch/s390/include/asm/scsw.h

(limited to 'arch')

diff --git a/arch/s390/include/asm/chsc.h b/arch/s390/include/asm/chsc.h
index 807997f7414..4943654ed7f 100644
--- a/arch/s390/include/asm/chsc.h
+++ b/arch/s390/include/asm/chsc.h
@@ -125,4 +125,32 @@ struct chsc_cpd_info {
 #define CHSC_INFO_CPD _IOWR(CHSC_IOCTL_MAGIC, 0x87, struct chsc_cpd_info)
 #define CHSC_INFO_DCAL _IOWR(CHSC_IOCTL_MAGIC, 0x88, struct chsc_dcal)
 
+#ifdef __KERNEL__
+
+struct css_general_char {
+	u64 : 12;
+	u32 dynio : 1;	 /* bit 12 */
+	u32 : 28;
+	u32 aif : 1;	 /* bit 41 */
+	u32 : 3;
+	u32 mcss : 1;	 /* bit 45 */
+	u32 fcs : 1;	 /* bit 46 */
+	u32 : 1;
+	u32 ext_mb : 1;  /* bit 48 */
+	u32 : 7;
+	u32 aif_tdd : 1; /* bit 56 */
+	u32 : 1;
+	u32 qebsm : 1;	 /* bit 58 */
+	u32 : 8;
+	u32 aif_osa : 1; /* bit 67 */
+	u32 : 14;
+	u32 cib : 1;	 /* bit 82 */
+	u32 : 5;
+	u32 fcx : 1;	 /* bit 88 */
+	u32 : 7;
+}__attribute__((packed));
+
+extern struct css_general_char css_general_characteristics;
+
+#endif /* __KERNEL__ */
 #endif
diff --git a/arch/s390/include/asm/cio.h b/arch/s390/include/asm/cio.h
index 619bf94b11f..e85679af54d 100644
--- a/arch/s390/include/asm/cio.h
+++ b/arch/s390/include/asm/cio.h
@@ -15,228 +15,7 @@
 #define LPM_ANYPATH 0xff
 #define __MAX_CSSID 0
 
-/**
- * struct cmd_scsw - command-mode subchannel status word
- * @key: subchannel key
- * @sctl: suspend control
- * @eswf: esw format
- * @cc: deferred condition code
- * @fmt: format
- * @pfch: prefetch
- * @isic: initial-status interruption control
- * @alcc: address-limit checking control
- * @ssi: suppress-suspended interruption
- * @zcc: zero condition code
- * @ectl: extended control
- * @pno: path not operational
- * @res: reserved
- * @fctl: function control
- * @actl: activity control
- * @stctl: status control
- * @cpa: channel program address
- * @dstat: device status
- * @cstat: subchannel status
- * @count: residual count
- */
-struct cmd_scsw {
-	__u32 key  : 4;
-	__u32 sctl : 1;
-	__u32 eswf : 1;
-	__u32 cc   : 2;
-	__u32 fmt  : 1;
-	__u32 pfch : 1;
-	__u32 isic : 1;
-	__u32 alcc : 1;
-	__u32 ssi  : 1;
-	__u32 zcc  : 1;
-	__u32 ectl : 1;
-	__u32 pno  : 1;
-	__u32 res  : 1;
-	__u32 fctl : 3;
-	__u32 actl : 7;
-	__u32 stctl : 5;
-	__u32 cpa;
-	__u32 dstat : 8;
-	__u32 cstat : 8;
-	__u32 count : 16;
-} __attribute__ ((packed));
-
-/**
- * struct tm_scsw - transport-mode subchannel status word
- * @key: subchannel key
- * @eswf: esw format
- * @cc: deferred condition code
- * @fmt: format
- * @x: IRB-format control
- * @q: interrogate-complete
- * @ectl: extended control
- * @pno: path not operational
- * @fctl: function control
- * @actl: activity control
- * @stctl: status control
- * @tcw: TCW address
- * @dstat: device status
- * @cstat: subchannel status
- * @fcxs: FCX status
- * @schxs: subchannel-extended status
- */
-struct tm_scsw {
-	u32 key:4;
-	u32 :1;
-	u32 eswf:1;
-	u32 cc:2;
-	u32 fmt:3;
-	u32 x:1;
-	u32 q:1;
-	u32 :1;
-	u32 ectl:1;
-	u32 pno:1;
-	u32 :1;
-	u32 fctl:3;
-	u32 actl:7;
-	u32 stctl:5;
-	u32 tcw;
-	u32 dstat:8;
-	u32 cstat:8;
-	u32 fcxs:8;
-	u32 schxs:8;
-} __attribute__ ((packed));
-
-/**
- * union scsw - subchannel status word
- * @cmd: command-mode SCSW
- * @tm: transport-mode SCSW
- */
-union scsw {
-	struct cmd_scsw cmd;
-	struct tm_scsw tm;
-} __attribute__ ((packed));
-
-int scsw_is_tm(union scsw *scsw);
-u32 scsw_key(union scsw *scsw);
-u32 scsw_eswf(union scsw *scsw);
-u32 scsw_cc(union scsw *scsw);
-u32 scsw_ectl(union scsw *scsw);
-u32 scsw_pno(union scsw *scsw);
-u32 scsw_fctl(union scsw *scsw);
-u32 scsw_actl(union scsw *scsw);
-u32 scsw_stctl(union scsw *scsw);
-u32 scsw_dstat(union scsw *scsw);
-u32 scsw_cstat(union scsw *scsw);
-int scsw_is_solicited(union scsw *scsw);
-int scsw_is_valid_key(union scsw *scsw);
-int scsw_is_valid_eswf(union scsw *scsw);
-int scsw_is_valid_cc(union scsw *scsw);
-int scsw_is_valid_ectl(union scsw *scsw);
-int scsw_is_valid_pno(union scsw *scsw);
-int scsw_is_valid_fctl(union scsw *scsw);
-int scsw_is_valid_actl(union scsw *scsw);
-int scsw_is_valid_stctl(union scsw *scsw);
-int scsw_is_valid_dstat(union scsw *scsw);
-int scsw_is_valid_cstat(union scsw *scsw);
-int scsw_cmd_is_valid_key(union scsw *scsw);
-int scsw_cmd_is_valid_sctl(union scsw *scsw);
-int scsw_cmd_is_valid_eswf(union scsw *scsw);
-int scsw_cmd_is_valid_cc(union scsw *scsw);
-int scsw_cmd_is_valid_fmt(union scsw *scsw);
-int scsw_cmd_is_valid_pfch(union scsw *scsw);
-int scsw_cmd_is_valid_isic(union scsw *scsw);
-int scsw_cmd_is_valid_alcc(union scsw *scsw);
-int scsw_cmd_is_valid_ssi(union scsw *scsw);
-int scsw_cmd_is_valid_zcc(union scsw *scsw);
-int scsw_cmd_is_valid_ectl(union scsw *scsw);
-int scsw_cmd_is_valid_pno(union scsw *scsw);
-int scsw_cmd_is_valid_fctl(union scsw *scsw);
-int scsw_cmd_is_valid_actl(union scsw *scsw);
-int scsw_cmd_is_valid_stctl(union scsw *scsw);
-int scsw_cmd_is_valid_dstat(union scsw *scsw);
-int scsw_cmd_is_valid_cstat(union scsw *scsw);
-int scsw_cmd_is_solicited(union scsw *scsw);
-int scsw_tm_is_valid_key(union scsw *scsw);
-int scsw_tm_is_valid_eswf(union scsw *scsw);
-int scsw_tm_is_valid_cc(union scsw *scsw);
-int scsw_tm_is_valid_fmt(union scsw *scsw);
-int scsw_tm_is_valid_x(union scsw *scsw);
-int scsw_tm_is_valid_q(union scsw *scsw);
-int scsw_tm_is_valid_ectl(union scsw *scsw);
-int scsw_tm_is_valid_pno(union scsw *scsw);
-int scsw_tm_is_valid_fctl(union scsw *scsw);
-int scsw_tm_is_valid_actl(union scsw *scsw);
-int scsw_tm_is_valid_stctl(union scsw *scsw);
-int scsw_tm_is_valid_dstat(union scsw *scsw);
-int scsw_tm_is_valid_cstat(union scsw *scsw);
-int scsw_tm_is_valid_fcxs(union scsw *scsw);
-int scsw_tm_is_valid_schxs(union scsw *scsw);
-int scsw_tm_is_solicited(union scsw *scsw);
-
-#define SCSW_FCTL_CLEAR_FUNC	 0x1
-#define SCSW_FCTL_HALT_FUNC	 0x2
-#define SCSW_FCTL_START_FUNC	 0x4
-
-#define SCSW_ACTL_SUSPENDED	 0x1
-#define SCSW_ACTL_DEVACT	 0x2
-#define SCSW_ACTL_SCHACT	 0x4
-#define SCSW_ACTL_CLEAR_PEND	 0x8
-#define SCSW_ACTL_HALT_PEND	 0x10
-#define SCSW_ACTL_START_PEND	 0x20
-#define SCSW_ACTL_RESUME_PEND	 0x40
-
-#define SCSW_STCTL_STATUS_PEND	 0x1
-#define SCSW_STCTL_SEC_STATUS	 0x2
-#define SCSW_STCTL_PRIM_STATUS	 0x4
-#define SCSW_STCTL_INTER_STATUS	 0x8
-#define SCSW_STCTL_ALERT_STATUS	 0x10
-
-#define DEV_STAT_ATTENTION	 0x80
-#define DEV_STAT_STAT_MOD	 0x40
-#define DEV_STAT_CU_END		 0x20
-#define DEV_STAT_BUSY		 0x10
-#define DEV_STAT_CHN_END	 0x08
-#define DEV_STAT_DEV_END	 0x04
-#define DEV_STAT_UNIT_CHECK	 0x02
-#define DEV_STAT_UNIT_EXCEP	 0x01
-
-#define SCHN_STAT_PCI		 0x80
-#define SCHN_STAT_INCORR_LEN	 0x40
-#define SCHN_STAT_PROG_CHECK	 0x20
-#define SCHN_STAT_PROT_CHECK	 0x10
-#define SCHN_STAT_CHN_DATA_CHK	 0x08
-#define SCHN_STAT_CHN_CTRL_CHK	 0x04
-#define SCHN_STAT_INTF_CTRL_CHK	 0x02
-#define SCHN_STAT_CHAIN_CHECK	 0x01
-
-/*
- * architectured values for first sense byte
- */
-#define SNS0_CMD_REJECT		0x80
-#define SNS_CMD_REJECT		SNS0_CMD_REJEC
-#define SNS0_INTERVENTION_REQ	0x40
-#define SNS0_BUS_OUT_CHECK	0x20
-#define SNS0_EQUIPMENT_CHECK	0x10
-#define SNS0_DATA_CHECK		0x08
-#define SNS0_OVERRUN		0x04
-#define SNS0_INCOMPL_DOMAIN	0x01
-
-/*
- * architectured values for second sense byte
- */
-#define SNS1_PERM_ERR		0x80
-#define SNS1_INV_TRACK_FORMAT	0x40
-#define SNS1_EOC		0x20
-#define SNS1_MESSAGE_TO_OPER	0x10
-#define SNS1_NO_REC_FOUND	0x08
-#define SNS1_FILE_PROTECTED	0x04
-#define SNS1_WRITE_INHIBITED	0x02
-#define SNS1_INPRECISE_END	0x01
-
-/*
- * architectured values for third sense byte
- */
-#define SNS2_REQ_INH_WRITE	0x80
-#define SNS2_CORRECTABLE	0x40
-#define SNS2_FIRST_LOG_ERR	0x20
-#define SNS2_ENV_DATA_PRESENT	0x10
-#define SNS2_INPRECISE_END	0x04
+#include <asm/scsw.h>
 
 /**
  * struct ccw1 - channel command word
diff --git a/arch/s390/include/asm/scsw.h b/arch/s390/include/asm/scsw.h
new file mode 100644
index 00000000000..de389cb54d2
--- /dev/null
+++ b/arch/s390/include/asm/scsw.h
@@ -0,0 +1,956 @@
+/*
+ *  Helper functions for scsw access.
+ *
+ *    Copyright IBM Corp. 2008,2009
+ *    Author(s): Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
+ */
+
+#ifndef _ASM_S390_SCSW_H_
+#define _ASM_S390_SCSW_H_
+
+#include <linux/types.h>
+#include <asm/chsc.h>
+#include <asm/cio.h>
+
+/**
+ * struct cmd_scsw - command-mode subchannel status word
+ * @key: subchannel key
+ * @sctl: suspend control
+ * @eswf: esw format
+ * @cc: deferred condition code
+ * @fmt: format
+ * @pfch: prefetch
+ * @isic: initial-status interruption control
+ * @alcc: address-limit checking control
+ * @ssi: suppress-suspended interruption
+ * @zcc: zero condition code
+ * @ectl: extended control
+ * @pno: path not operational
+ * @res: reserved
+ * @fctl: function control
+ * @actl: activity control
+ * @stctl: status control
+ * @cpa: channel program address
+ * @dstat: device status
+ * @cstat: subchannel status
+ * @count: residual count
+ */
+struct cmd_scsw {
+	__u32 key  : 4;
+	__u32 sctl : 1;
+	__u32 eswf : 1;
+	__u32 cc   : 2;
+	__u32 fmt  : 1;
+	__u32 pfch : 1;
+	__u32 isic : 1;
+	__u32 alcc : 1;
+	__u32 ssi  : 1;
+	__u32 zcc  : 1;
+	__u32 ectl : 1;
+	__u32 pno  : 1;
+	__u32 res  : 1;
+	__u32 fctl : 3;
+	__u32 actl : 7;
+	__u32 stctl : 5;
+	__u32 cpa;
+	__u32 dstat : 8;
+	__u32 cstat : 8;
+	__u32 count : 16;
+} __attribute__ ((packed));
+
+/**
+ * struct tm_scsw - transport-mode subchannel status word
+ * @key: subchannel key
+ * @eswf: esw format
+ * @cc: deferred condition code
+ * @fmt: format
+ * @x: IRB-format control
+ * @q: interrogate-complete
+ * @ectl: extended control
+ * @pno: path not operational
+ * @fctl: function control
+ * @actl: activity control
+ * @stctl: status control
+ * @tcw: TCW address
+ * @dstat: device status
+ * @cstat: subchannel status
+ * @fcxs: FCX status
+ * @schxs: subchannel-extended status
+ */
+struct tm_scsw {
+	u32 key:4;
+	u32 :1;
+	u32 eswf:1;
+	u32 cc:2;
+	u32 fmt:3;
+	u32 x:1;
+	u32 q:1;
+	u32 :1;
+	u32 ectl:1;
+	u32 pno:1;
+	u32 :1;
+	u32 fctl:3;
+	u32 actl:7;
+	u32 stctl:5;
+	u32 tcw;
+	u32 dstat:8;
+	u32 cstat:8;
+	u32 fcxs:8;
+	u32 schxs:8;
+} __attribute__ ((packed));
+
+/**
+ * union scsw - subchannel status word
+ * @cmd: command-mode SCSW
+ * @tm: transport-mode SCSW
+ */
+union scsw {
+	struct cmd_scsw cmd;
+	struct tm_scsw tm;
+} __attribute__ ((packed));
+
+#define SCSW_FCTL_CLEAR_FUNC	 0x1
+#define SCSW_FCTL_HALT_FUNC	 0x2
+#define SCSW_FCTL_START_FUNC	 0x4
+
+#define SCSW_ACTL_SUSPENDED	 0x1
+#define SCSW_ACTL_DEVACT	 0x2
+#define SCSW_ACTL_SCHACT	 0x4
+#define SCSW_ACTL_CLEAR_PEND	 0x8
+#define SCSW_ACTL_HALT_PEND	 0x10
+#define SCSW_ACTL_START_PEND	 0x20
+#define SCSW_ACTL_RESUME_PEND	 0x40
+
+#define SCSW_STCTL_STATUS_PEND	 0x1
+#define SCSW_STCTL_SEC_STATUS	 0x2
+#define SCSW_STCTL_PRIM_STATUS	 0x4
+#define SCSW_STCTL_INTER_STATUS	 0x8
+#define SCSW_STCTL_ALERT_STATUS	 0x10
+
+#define DEV_STAT_ATTENTION	 0x80
+#define DEV_STAT_STAT_MOD	 0x40
+#define DEV_STAT_CU_END		 0x20
+#define DEV_STAT_BUSY		 0x10
+#define DEV_STAT_CHN_END	 0x08
+#define DEV_STAT_DEV_END	 0x04
+#define DEV_STAT_UNIT_CHECK	 0x02
+#define DEV_STAT_UNIT_EXCEP	 0x01
+
+#define SCHN_STAT_PCI		 0x80
+#define SCHN_STAT_INCORR_LEN	 0x40
+#define SCHN_STAT_PROG_CHECK	 0x20
+#define SCHN_STAT_PROT_CHECK	 0x10
+#define SCHN_STAT_CHN_DATA_CHK	 0x08
+#define SCHN_STAT_CHN_CTRL_CHK	 0x04
+#define SCHN_STAT_INTF_CTRL_CHK	 0x02
+#define SCHN_STAT_CHAIN_CHECK	 0x01
+
+/*
+ * architectured values for first sense byte
+ */
+#define SNS0_CMD_REJECT		0x80
+#define SNS_CMD_REJECT		SNS0_CMD_REJEC
+#define SNS0_INTERVENTION_REQ	0x40
+#define SNS0_BUS_OUT_CHECK	0x20
+#define SNS0_EQUIPMENT_CHECK	0x10
+#define SNS0_DATA_CHECK		0x08
+#define SNS0_OVERRUN		0x04
+#define SNS0_INCOMPL_DOMAIN	0x01
+
+/*
+ * architectured values for second sense byte
+ */
+#define SNS1_PERM_ERR		0x80
+#define SNS1_INV_TRACK_FORMAT	0x40
+#define SNS1_EOC		0x20
+#define SNS1_MESSAGE_TO_OPER	0x10
+#define SNS1_NO_REC_FOUND	0x08
+#define SNS1_FILE_PROTECTED	0x04
+#define SNS1_WRITE_INHIBITED	0x02
+#define SNS1_INPRECISE_END	0x01
+
+/*
+ * architectured values for third sense byte
+ */
+#define SNS2_REQ_INH_WRITE	0x80
+#define SNS2_CORRECTABLE	0x40
+#define SNS2_FIRST_LOG_ERR	0x20
+#define SNS2_ENV_DATA_PRESENT	0x10
+#define SNS2_INPRECISE_END	0x04
+
+/**
+ * scsw_is_tm - check for transport mode scsw
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the specified scsw is a transport mode scsw, zero
+ * otherwise.
+ */
+static inline int scsw_is_tm(union scsw *scsw)
+{
+	return css_general_characteristics.fcx && (scsw->tm.x == 1);
+}
+
+/**
+ * scsw_key - return scsw key field
+ * @scsw: pointer to scsw
+ *
+ * Return the value of the key field of the specified scsw, regardless of
+ * whether it is a transport mode or command mode scsw.
+ */
+static inline u32 scsw_key(union scsw *scsw)
+{
+	if (scsw_is_tm(scsw))
+		return scsw->tm.key;
+	else
+		return scsw->cmd.key;
+}
+
+/**
+ * scsw_eswf - return scsw eswf field
+ * @scsw: pointer to scsw
+ *
+ * Return the value of the eswf field of the specified scsw, regardless of
+ * whether it is a transport mode or command mode scsw.
+ */
+static inline u32 scsw_eswf(union scsw *scsw)
+{
+	if (scsw_is_tm(scsw))
+		return scsw->tm.eswf;
+	else
+		return scsw->cmd.eswf;
+}
+
+/**
+ * scsw_cc - return scsw cc field
+ * @scsw: pointer to scsw
+ *
+ * Return the value of the cc field of the specified scsw, regardless of
+ * whether it is a transport mode or command mode scsw.
+ */
+static inline u32 scsw_cc(union scsw *scsw)
+{
+	if (scsw_is_tm(scsw))
+		return scsw->tm.cc;
+	else
+		return scsw->cmd.cc;
+}
+
+/**
+ * scsw_ectl - return scsw ectl field
+ * @scsw: pointer to scsw
+ *
+ * Return the value of the ectl field of the specified scsw, regardless of
+ * whether it is a transport mode or command mode scsw.
+ */
+static inline u32 scsw_ectl(union scsw *scsw)
+{
+	if (scsw_is_tm(scsw))
+		return scsw->tm.ectl;
+	else
+		return scsw->cmd.ectl;
+}
+
+/**
+ * scsw_pno - return scsw pno field
+ * @scsw: pointer to scsw
+ *
+ * Return the value of the pno field of the specified scsw, regardless of
+ * whether it is a transport mode or command mode scsw.
+ */
+static inline u32 scsw_pno(union scsw *scsw)
+{
+	if (scsw_is_tm(scsw))
+		return scsw->tm.pno;
+	else
+		return scsw->cmd.pno;
+}
+
+/**
+ * scsw_fctl - return scsw fctl field
+ * @scsw: pointer to scsw
+ *
+ * Return the value of the fctl field of the specified scsw, regardless of
+ * whether it is a transport mode or command mode scsw.
+ */
+static inline u32 scsw_fctl(union scsw *scsw)
+{
+	if (scsw_is_tm(scsw))
+		return scsw->tm.fctl;
+	else
+		return scsw->cmd.fctl;
+}
+
+/**
+ * scsw_actl - return scsw actl field
+ * @scsw: pointer to scsw
+ *
+ * Return the value of the actl field of the specified scsw, regardless of
+ * whether it is a transport mode or command mode scsw.
+ */
+static inline u32 scsw_actl(union scsw *scsw)
+{
+	if (scsw_is_tm(scsw))
+		return scsw->tm.actl;
+	else
+		return scsw->cmd.actl;
+}
+
+/**
+ * scsw_stctl - return scsw stctl field
+ * @scsw: pointer to scsw
+ *
+ * Return the value of the stctl field of the specified scsw, regardless of
+ * whether it is a transport mode or command mode scsw.
+ */
+static inline u32 scsw_stctl(union scsw *scsw)
+{
+	if (scsw_is_tm(scsw))
+		return scsw->tm.stctl;
+	else
+		return scsw->cmd.stctl;
+}
+
+/**
+ * scsw_dstat - return scsw dstat field
+ * @scsw: pointer to scsw
+ *
+ * Return the value of the dstat field of the specified scsw, regardless of
+ * whether it is a transport mode or command mode scsw.
+ */
+static inline u32 scsw_dstat(union scsw *scsw)
+{
+	if (scsw_is_tm(scsw))
+		return scsw->tm.dstat;
+	else
+		return scsw->cmd.dstat;
+}
+
+/**
+ * scsw_cstat - return scsw cstat field
+ * @scsw: pointer to scsw
+ *
+ * Return the value of the cstat field of the specified scsw, regardless of
+ * whether it is a transport mode or command mode scsw.
+ */
+static inline u32 scsw_cstat(union scsw *scsw)
+{
+	if (scsw_is_tm(scsw))
+		return scsw->tm.cstat;
+	else
+		return scsw->cmd.cstat;
+}
+
+/**
+ * scsw_cmd_is_valid_key - check key field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the key field of the specified command mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_cmd_is_valid_key(union scsw *scsw)
+{
+	return (scsw->cmd.fctl & SCSW_FCTL_START_FUNC);
+}
+
+/**
+ * scsw_cmd_is_valid_sctl - check fctl field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the fctl field of the specified command mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_cmd_is_valid_sctl(union scsw *scsw)
+{
+	return (scsw->cmd.fctl & SCSW_FCTL_START_FUNC);
+}
+
+/**
+ * scsw_cmd_is_valid_eswf - check eswf field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the eswf field of the specified command mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_cmd_is_valid_eswf(union scsw *scsw)
+{
+	return (scsw->cmd.stctl & SCSW_STCTL_STATUS_PEND);
+}
+
+/**
+ * scsw_cmd_is_valid_cc - check cc field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the cc field of the specified command mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_cmd_is_valid_cc(union scsw *scsw)
+{
+	return (scsw->cmd.fctl & SCSW_FCTL_START_FUNC) &&
+	       (scsw->cmd.stctl & SCSW_STCTL_STATUS_PEND);
+}
+
+/**
+ * scsw_cmd_is_valid_fmt - check fmt field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the fmt field of the specified command mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_cmd_is_valid_fmt(union scsw *scsw)
+{
+	return (scsw->cmd.fctl & SCSW_FCTL_START_FUNC);
+}
+
+/**
+ * scsw_cmd_is_valid_pfch - check pfch field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the pfch field of the specified command mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_cmd_is_valid_pfch(union scsw *scsw)
+{
+	return (scsw->cmd.fctl & SCSW_FCTL_START_FUNC);
+}
+
+/**
+ * scsw_cmd_is_valid_isic - check isic field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the isic field of the specified command mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_cmd_is_valid_isic(union scsw *scsw)
+{
+	return (scsw->cmd.fctl & SCSW_FCTL_START_FUNC);
+}
+
+/**
+ * scsw_cmd_is_valid_alcc - check alcc field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the alcc field of the specified command mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_cmd_is_valid_alcc(union scsw *scsw)
+{
+	return (scsw->cmd.fctl & SCSW_FCTL_START_FUNC);
+}
+
+/**
+ * scsw_cmd_is_valid_ssi - check ssi field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the ssi field of the specified command mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_cmd_is_valid_ssi(union scsw *scsw)
+{
+	return (scsw->cmd.fctl & SCSW_FCTL_START_FUNC);
+}
+
+/**
+ * scsw_cmd_is_valid_zcc - check zcc field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the zcc field of the specified command mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_cmd_is_valid_zcc(union scsw *scsw)
+{
+	return (scsw->cmd.fctl & SCSW_FCTL_START_FUNC) &&
+	       (scsw->cmd.stctl & SCSW_STCTL_INTER_STATUS);
+}
+
+/**
+ * scsw_cmd_is_valid_ectl - check ectl field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the ectl field of the specified command mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_cmd_is_valid_ectl(union scsw *scsw)
+{
+	return (scsw->cmd.stctl & SCSW_STCTL_STATUS_PEND) &&
+	       !(scsw->cmd.stctl & SCSW_STCTL_INTER_STATUS) &&
+	       (scsw->cmd.stctl & SCSW_STCTL_ALERT_STATUS);
+}
+
+/**
+ * scsw_cmd_is_valid_pno - check pno field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the pno field of the specified command mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_cmd_is_valid_pno(union scsw *scsw)
+{
+	return (scsw->cmd.fctl != 0) &&
+	       (scsw->cmd.stctl & SCSW_STCTL_STATUS_PEND) &&
+	       (!(scsw->cmd.stctl & SCSW_STCTL_INTER_STATUS) ||
+		 ((scsw->cmd.stctl & SCSW_STCTL_INTER_STATUS) &&
+		  (scsw->cmd.actl & SCSW_ACTL_SUSPENDED)));
+}
+
+/**
+ * scsw_cmd_is_valid_fctl - check fctl field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the fctl field of the specified command mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_cmd_is_valid_fctl(union scsw *scsw)
+{
+	/* Only valid if pmcw.dnv == 1*/
+	return 1;
+}
+
+/**
+ * scsw_cmd_is_valid_actl - check actl field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the actl field of the specified command mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_cmd_is_valid_actl(union scsw *scsw)
+{
+	/* Only valid if pmcw.dnv == 1*/
+	return 1;
+}
+
+/**
+ * scsw_cmd_is_valid_stctl - check stctl field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the stctl field of the specified command mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_cmd_is_valid_stctl(union scsw *scsw)
+{
+	/* Only valid if pmcw.dnv == 1*/
+	return 1;
+}
+
+/**
+ * scsw_cmd_is_valid_dstat - check dstat field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the dstat field of the specified command mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_cmd_is_valid_dstat(union scsw *scsw)
+{
+	return (scsw->cmd.stctl & SCSW_STCTL_STATUS_PEND) &&
+	       (scsw->cmd.cc != 3);
+}
+
+/**
+ * scsw_cmd_is_valid_cstat - check cstat field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the cstat field of the specified command mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_cmd_is_valid_cstat(union scsw *scsw)
+{
+	return (scsw->cmd.stctl & SCSW_STCTL_STATUS_PEND) &&
+	       (scsw->cmd.cc != 3);
+}
+
+/**
+ * scsw_tm_is_valid_key - check key field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the key field of the specified transport mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_tm_is_valid_key(union scsw *scsw)
+{
+	return (scsw->tm.fctl & SCSW_FCTL_START_FUNC);
+}
+
+/**
+ * scsw_tm_is_valid_eswf - check eswf field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the eswf field of the specified transport mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_tm_is_valid_eswf(union scsw *scsw)
+{
+	return (scsw->tm.stctl & SCSW_STCTL_STATUS_PEND);
+}
+
+/**
+ * scsw_tm_is_valid_cc - check cc field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the cc field of the specified transport mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_tm_is_valid_cc(union scsw *scsw)
+{
+	return (scsw->tm.fctl & SCSW_FCTL_START_FUNC) &&
+	       (scsw->tm.stctl & SCSW_STCTL_STATUS_PEND);
+}
+
+/**
+ * scsw_tm_is_valid_fmt - check fmt field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the fmt field of the specified transport mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_tm_is_valid_fmt(union scsw *scsw)
+{
+	return 1;
+}
+
+/**
+ * scsw_tm_is_valid_x - check x field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the x field of the specified transport mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_tm_is_valid_x(union scsw *scsw)
+{
+	return 1;
+}
+
+/**
+ * scsw_tm_is_valid_q - check q field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the q field of the specified transport mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_tm_is_valid_q(union scsw *scsw)
+{
+	return 1;
+}
+
+/**
+ * scsw_tm_is_valid_ectl - check ectl field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the ectl field of the specified transport mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_tm_is_valid_ectl(union scsw *scsw)
+{
+	return (scsw->tm.stctl & SCSW_STCTL_STATUS_PEND) &&
+	       !(scsw->tm.stctl & SCSW_STCTL_INTER_STATUS) &&
+	       (scsw->tm.stctl & SCSW_STCTL_ALERT_STATUS);
+}
+
+/**
+ * scsw_tm_is_valid_pno - check pno field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the pno field of the specified transport mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_tm_is_valid_pno(union scsw *scsw)
+{
+	return (scsw->tm.fctl != 0) &&
+	       (scsw->tm.stctl & SCSW_STCTL_STATUS_PEND) &&
+	       (!(scsw->tm.stctl & SCSW_STCTL_INTER_STATUS) ||
+		 ((scsw->tm.stctl & SCSW_STCTL_INTER_STATUS) &&
+		  (scsw->tm.actl & SCSW_ACTL_SUSPENDED)));
+}
+
+/**
+ * scsw_tm_is_valid_fctl - check fctl field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the fctl field of the specified transport mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_tm_is_valid_fctl(union scsw *scsw)
+{
+	/* Only valid if pmcw.dnv == 1*/
+	return 1;
+}
+
+/**
+ * scsw_tm_is_valid_actl - check actl field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the actl field of the specified transport mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_tm_is_valid_actl(union scsw *scsw)
+{
+	/* Only valid if pmcw.dnv == 1*/
+	return 1;
+}
+
+/**
+ * scsw_tm_is_valid_stctl - check stctl field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the stctl field of the specified transport mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_tm_is_valid_stctl(union scsw *scsw)
+{
+	/* Only valid if pmcw.dnv == 1*/
+	return 1;
+}
+
+/**
+ * scsw_tm_is_valid_dstat - check dstat field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the dstat field of the specified transport mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_tm_is_valid_dstat(union scsw *scsw)
+{
+	return (scsw->tm.stctl & SCSW_STCTL_STATUS_PEND) &&
+	       (scsw->tm.cc != 3);
+}
+
+/**
+ * scsw_tm_is_valid_cstat - check cstat field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the cstat field of the specified transport mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_tm_is_valid_cstat(union scsw *scsw)
+{
+	return (scsw->tm.stctl & SCSW_STCTL_STATUS_PEND) &&
+	       (scsw->tm.cc != 3);
+}
+
+/**
+ * scsw_tm_is_valid_fcxs - check fcxs field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the fcxs field of the specified transport mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_tm_is_valid_fcxs(union scsw *scsw)
+{
+	return 1;
+}
+
+/**
+ * scsw_tm_is_valid_schxs - check schxs field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the schxs field of the specified transport mode scsw is
+ * valid, zero otherwise.
+ */
+static inline int scsw_tm_is_valid_schxs(union scsw *scsw)
+{
+	return (scsw->tm.cstat & (SCHN_STAT_PROG_CHECK |
+				  SCHN_STAT_INTF_CTRL_CHK |
+				  SCHN_STAT_PROT_CHECK |
+				  SCHN_STAT_CHN_DATA_CHK));
+}
+
+/**
+ * scsw_is_valid_actl - check actl field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the actl field of the specified scsw is valid,
+ * regardless of whether it is a transport mode or command mode scsw.
+ * Return zero if the field does not contain a valid value.
+ */
+static inline int scsw_is_valid_actl(union scsw *scsw)
+{
+	if (scsw_is_tm(scsw))
+		return scsw_tm_is_valid_actl(scsw);
+	else
+		return scsw_cmd_is_valid_actl(scsw);
+}
+
+/**
+ * scsw_is_valid_cc - check cc field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the cc field of the specified scsw is valid,
+ * regardless of whether it is a transport mode or command mode scsw.
+ * Return zero if the field does not contain a valid value.
+ */
+static inline int scsw_is_valid_cc(union scsw *scsw)
+{
+	if (scsw_is_tm(scsw))
+		return scsw_tm_is_valid_cc(scsw);
+	else
+		return scsw_cmd_is_valid_cc(scsw);
+}
+
+/**
+ * scsw_is_valid_cstat - check cstat field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the cstat field of the specified scsw is valid,
+ * regardless of whether it is a transport mode or command mode scsw.
+ * Return zero if the field does not contain a valid value.
+ */
+static inline int scsw_is_valid_cstat(union scsw *scsw)
+{
+	if (scsw_is_tm(scsw))
+		return scsw_tm_is_valid_cstat(scsw);
+	else
+		return scsw_cmd_is_valid_cstat(scsw);
+}
+
+/**
+ * scsw_is_valid_dstat - check dstat field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the dstat field of the specified scsw is valid,
+ * regardless of whether it is a transport mode or command mode scsw.
+ * Return zero if the field does not contain a valid value.
+ */
+static inline int scsw_is_valid_dstat(union scsw *scsw)
+{
+	if (scsw_is_tm(scsw))
+		return scsw_tm_is_valid_dstat(scsw);
+	else
+		return scsw_cmd_is_valid_dstat(scsw);
+}
+
+/**
+ * scsw_is_valid_ectl - check ectl field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the ectl field of the specified scsw is valid,
+ * regardless of whether it is a transport mode or command mode scsw.
+ * Return zero if the field does not contain a valid value.
+ */
+static inline int scsw_is_valid_ectl(union scsw *scsw)
+{
+	if (scsw_is_tm(scsw))
+		return scsw_tm_is_valid_ectl(scsw);
+	else
+		return scsw_cmd_is_valid_ectl(scsw);
+}
+
+/**
+ * scsw_is_valid_eswf - check eswf field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the eswf field of the specified scsw is valid,
+ * regardless of whether it is a transport mode or command mode scsw.
+ * Return zero if the field does not contain a valid value.
+ */
+static inline int scsw_is_valid_eswf(union scsw *scsw)
+{
+	if (scsw_is_tm(scsw))
+		return scsw_tm_is_valid_eswf(scsw);
+	else
+		return scsw_cmd_is_valid_eswf(scsw);
+}
+
+/**
+ * scsw_is_valid_fctl - check fctl field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the fctl field of the specified scsw is valid,
+ * regardless of whether it is a transport mode or command mode scsw.
+ * Return zero if the field does not contain a valid value.
+ */
+static inline int scsw_is_valid_fctl(union scsw *scsw)
+{
+	if (scsw_is_tm(scsw))
+		return scsw_tm_is_valid_fctl(scsw);
+	else
+		return scsw_cmd_is_valid_fctl(scsw);
+}
+
+/**
+ * scsw_is_valid_key - check key field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the key field of the specified scsw is valid,
+ * regardless of whether it is a transport mode or command mode scsw.
+ * Return zero if the field does not contain a valid value.
+ */
+static inline int scsw_is_valid_key(union scsw *scsw)
+{
+	if (scsw_is_tm(scsw))
+		return scsw_tm_is_valid_key(scsw);
+	else
+		return scsw_cmd_is_valid_key(scsw);
+}
+
+/**
+ * scsw_is_valid_pno - check pno field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the pno field of the specified scsw is valid,
+ * regardless of whether it is a transport mode or command mode scsw.
+ * Return zero if the field does not contain a valid value.
+ */
+static inline int scsw_is_valid_pno(union scsw *scsw)
+{
+	if (scsw_is_tm(scsw))
+		return scsw_tm_is_valid_pno(scsw);
+	else
+		return scsw_cmd_is_valid_pno(scsw);
+}
+
+/**
+ * scsw_is_valid_stctl - check stctl field validity
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the stctl field of the specified scsw is valid,
+ * regardless of whether it is a transport mode or command mode scsw.
+ * Return zero if the field does not contain a valid value.
+ */
+static inline int scsw_is_valid_stctl(union scsw *scsw)
+{
+	if (scsw_is_tm(scsw))
+		return scsw_tm_is_valid_stctl(scsw);
+	else
+		return scsw_cmd_is_valid_stctl(scsw);
+}
+
+/**
+ * scsw_cmd_is_solicited - check for solicited scsw
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the command mode scsw indicates that the associated
+ * status condition is solicited, zero if it is unsolicited.
+ */
+static inline int scsw_cmd_is_solicited(union scsw *scsw)
+{
+	return (scsw->cmd.cc != 0) || (scsw->cmd.stctl !=
+		(SCSW_STCTL_STATUS_PEND | SCSW_STCTL_ALERT_STATUS));
+}
+
+/**
+ * scsw_tm_is_solicited - check for solicited scsw
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the transport mode scsw indicates that the associated
+ * status condition is solicited, zero if it is unsolicited.
+ */
+static inline int scsw_tm_is_solicited(union scsw *scsw)
+{
+	return (scsw->tm.cc != 0) || (scsw->tm.stctl !=
+		(SCSW_STCTL_STATUS_PEND | SCSW_STCTL_ALERT_STATUS));
+}
+
+/**
+ * scsw_is_solicited - check for solicited scsw
+ * @scsw: pointer to scsw
+ *
+ * Return non-zero if the transport or command mode scsw indicates that the
+ * associated status condition is solicited, zero if it is unsolicited.
+ */
+static inline int scsw_is_solicited(union scsw *scsw)
+{
+	if (scsw_is_tm(scsw))
+		return scsw_tm_is_solicited(scsw);
+	else
+		return scsw_cmd_is_solicited(scsw);
+}
+
+#endif /* _ASM_S390_SCSW_H_ */
-- 
cgit v1.2.3


From 05e7ff7da78bad3edc1290ed86b4a37da72ced62 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Fri, 11 Sep 2009 10:28:31 +0200
Subject: [S390] introduce get_clock_monotonic

Introduce get_clock_monotonic() function which can be used to get a
(fast) timestamp. Resolution is the same as for get_clock(). The
only difference is that the timestamps are monotonic and don't jump
backward or forward.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/include/asm/timex.h | 14 ++++++++++++++
 arch/s390/kernel/time.c       |  3 ++-
 2 files changed, 16 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/s390/include/asm/timex.h b/arch/s390/include/asm/timex.h
index cc21e3e20fd..24aa1cda20a 100644
--- a/arch/s390/include/asm/timex.h
+++ b/arch/s390/include/asm/timex.h
@@ -90,4 +90,18 @@ unsigned long long monotonic_clock(void);
 
 extern u64 sched_clock_base_cc;
 
+/**
+ * get_clock_monotonic - returns current time in clock rate units
+ *
+ * The caller must ensure that preemption is disabled.
+ * The clock and sched_clock_base get changed via stop_machine.
+ * Therefore preemption must be disabled when calling this
+ * function, otherwise the returned value is not guaranteed to
+ * be monotonic.
+ */
+static inline unsigned long long get_clock_monotonic(void)
+{
+	return get_clock_xt() - sched_clock_base_cc;
+}
+
 #endif
diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c
index d4c8e9c47c8..54e327e9af0 100644
--- a/arch/s390/kernel/time.c
+++ b/arch/s390/kernel/time.c
@@ -60,6 +60,7 @@
 #define TICK_SIZE tick
 
 u64 sched_clock_base_cc = -1;	/* Force to data section. */
+EXPORT_SYMBOL_GPL(sched_clock_base_cc);
 
 static DEFINE_PER_CPU(struct clock_event_device, comparators);
 
@@ -68,7 +69,7 @@ static DEFINE_PER_CPU(struct clock_event_device, comparators);
  */
 unsigned long long notrace sched_clock(void)
 {
-	return ((get_clock_xt() - sched_clock_base_cc) * 125) >> 9;
+	return (get_clock_monotonic() * 125) >> 9;
 }
 
 /*
-- 
cgit v1.2.3


From 04efc3be767cfed0d348fd598eba8fe5f5bf5fe6 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Fri, 11 Sep 2009 10:28:32 +0200
Subject: [S390] convert/optimize csum_fold() to C

In the meantime gcc generates better code than the old inline
assemblies do. Original inline assembly results in:

lr	%r1,%r2
sr	%r3,%r3
lr	%r2,%r1
srdl	%r2,16
alr	%r2,%r3
alr	%r1,%r2
srl	%r1,16
xilf	%r1,65535
llghr	%r2,%r1
br	%r14

Out of the C code gcc generates this:

rll	%r1,%r2,16
ar	%r1,%r2
srl	%r1,16
xilf	%r1,65535
llghr	%r2,%r1
br	%r14

In addition we don't have any static register allocations anymore and
gcc is free to shuffle instructions around for better pipeline usage.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/include/asm/checksum.h | 25 ++++---------------------
 1 file changed, 4 insertions(+), 21 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/include/asm/checksum.h b/arch/s390/include/asm/checksum.h
index d5a8e7c1477..6c00f6800a3 100644
--- a/arch/s390/include/asm/checksum.h
+++ b/arch/s390/include/asm/checksum.h
@@ -78,28 +78,11 @@ csum_partial_copy_nocheck (const void *src, void *dst, int len, __wsum sum)
  */
 static inline __sum16 csum_fold(__wsum sum)
 {
-#ifndef __s390x__
-	register_pair rp;
+	u32 csum = (__force u32) sum;
 
-	asm volatile(
-		"	slr	%N1,%N1\n"	/* %0 = H L */
-		"	lr	%1,%0\n"	/* %0 = H L, %1 = H L 0 0 */
-		"	srdl	%1,16\n"	/* %0 = H L, %1 = 0 H L 0 */
-		"	alr	%1,%N1\n"	/* %0 = H L, %1 = L H L 0 */
-		"	alr	%0,%1\n"	/* %0 = H+L+C L+H */
-		"	srl	%0,16\n"	/* %0 = H+L+C */
-		: "+&d" (sum), "=d" (rp) : : "cc");
-#else /* __s390x__ */
-	asm volatile(
-		"	sr	3,3\n"		/* %0 = H*65536 + L */
-		"	lr	2,%0\n"		/* %0 = H L, 2/3 = H L / 0 0 */
-		"	srdl	2,16\n"		/* %0 = H L, 2/3 = 0 H / L 0 */
-		"	alr	2,3\n"		/* %0 = H L, 2/3 = L H / L 0 */
-		"	alr	%0,2\n"		/* %0 = H+L+C L+H */
-		"	srl	%0,16\n"	/* %0 = H+L+C */
-		: "+&d" (sum) : : "cc", "2", "3");
-#endif /* __s390x__ */
-	return (__force __sum16) ~sum;
+	csum += (csum >> 16) + (csum << 16);
+	csum >>= 16;
+	return (__force __sum16) ~csum;
 }
 
 /*
-- 
cgit v1.2.3


From 6ac2a4ddd10d6916785b4c566d521025c855f823 Mon Sep 17 00:00:00 2001
From: Martin Schwidefsky <schwidefsky@de.ibm.com>
Date: Fri, 11 Sep 2009 10:28:33 +0200
Subject: [S390] improve mcount code

Move the 64 bit mount code from mcount.S into mcount64.S and avoid
code duplication.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/kernel/Makefile   |   2 +-
 arch/s390/kernel/mcount.S   | 147 +++-----------------------------------------
 arch/s390/kernel/mcount64.S |  78 +++++++++++++++++++++++
 3 files changed, 89 insertions(+), 138 deletions(-)
 create mode 100644 arch/s390/kernel/mcount64.S

(limited to 'arch')

diff --git a/arch/s390/kernel/Makefile b/arch/s390/kernel/Makefile
index c75ed43b1a1..794955305f3 100644
--- a/arch/s390/kernel/Makefile
+++ b/arch/s390/kernel/Makefile
@@ -41,7 +41,7 @@ obj-$(CONFIG_COMPAT)		+= compat_linux.o compat_signal.o \
 
 obj-$(CONFIG_STACKTRACE)	+= stacktrace.o
 obj-$(CONFIG_KPROBES)		+= kprobes.o
-obj-$(CONFIG_FUNCTION_TRACER)	+= mcount.o
+obj-$(CONFIG_FUNCTION_TRACER)	+= $(if $(CONFIG_64BIT),mcount64.o,mcount.o)
 obj-$(CONFIG_DYNAMIC_FTRACE)	+= ftrace.o
 obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o
 
diff --git a/arch/s390/kernel/mcount.S b/arch/s390/kernel/mcount.S
index 2a0a5e97ba8..dfe015d7398 100644
--- a/arch/s390/kernel/mcount.S
+++ b/arch/s390/kernel/mcount.S
@@ -11,111 +11,27 @@
 ftrace_stub:
 	br	%r14
 
-#ifdef CONFIG_64BIT
-
-#ifdef CONFIG_DYNAMIC_FTRACE
-
 	.globl _mcount
 _mcount:
-	br	%r14
-
-	.globl ftrace_caller
-ftrace_caller:
-	larl	%r1,function_trace_stop
-	icm	%r1,0xf,0(%r1)
-	bnzr	%r14
-	stmg	%r2,%r5,32(%r15)
-	stg	%r14,112(%r15)
-	lgr	%r1,%r15
-	aghi	%r15,-160
-	stg	%r1,__SF_BACKCHAIN(%r15)
-	lgr	%r2,%r14
-	lg	%r3,168(%r15)
-	larl	%r14,ftrace_dyn_func
-	lg	%r14,0(%r14)
-	basr	%r14,%r14
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
-	.globl	ftrace_graph_caller
-ftrace_graph_caller:
-	# This unconditional branch gets runtime patched. Change only if
-	# you know what you are doing. See ftrace_enable_graph_caller().
-	j	0f
-	lg	%r2,272(%r15)
-	lg	%r3,168(%r15)
-	brasl	%r14,prepare_ftrace_return
-	stg	%r2,168(%r15)
-0:
-#endif
-	aghi	%r15,160
-	lmg	%r2,%r5,32(%r15)
-	lg	%r14,112(%r15)
+#ifdef CONFIG_DYNAMIC_FTRACE
 	br	%r14
 
 	.data
 	.globl	ftrace_dyn_func
 ftrace_dyn_func:
-	.quad	ftrace_stub
+	.long	ftrace_stub
 	.previous
 
-#else /* CONFIG_DYNAMIC_FTRACE */
-
-	.globl _mcount
-_mcount:
-	larl	%r1,function_trace_stop
-	icm	%r1,0xf,0(%r1)
-	bnzr	%r14
-	stmg	%r2,%r5,32(%r15)
-	stg	%r14,112(%r15)
-	lgr	%r1,%r15
-	aghi	%r15,-160
-	stg	%r1,__SF_BACKCHAIN(%r15)
-	lgr	%r2,%r14
-	lg	%r3,168(%r15)
-	larl	%r14,ftrace_trace_function
-	lg	%r14,0(%r14)
-	basr	%r14,%r14
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
-	lg	%r2,272(%r15)
-	lg	%r3,168(%r15)
-	brasl	%r14,prepare_ftrace_return
-	stg	%r2,168(%r15)
-#endif
-	aghi	%r15,160
-	lmg	%r2,%r5,32(%r15)
-	lg	%r14,112(%r15)
-	br	%r14
-
-#endif /* CONFIG_DYNAMIC_FTRACE */
-
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
-
-	.globl	return_to_handler
-return_to_handler:
-	stmg	%r2,%r5,32(%r15)
-	lgr	%r1,%r15
-	aghi	%r15,-160
-	stg	%r1,__SF_BACKCHAIN(%r15)
-	brasl	%r14,ftrace_return_to_handler
-	aghi	%r15,160
-	lgr	%r14,%r2
-	lmg	%r2,%r5,32(%r15)
-	br	%r14
-
-#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
-
-#else /* CONFIG_64BIT */
-
-#ifdef CONFIG_DYNAMIC_FTRACE
-
-	.globl _mcount
-_mcount:
-	br	%r14
-
 	.globl ftrace_caller
 ftrace_caller:
+#endif
 	stm	%r2,%r5,16(%r15)
 	bras	%r1,2f
+#ifdef CONFIG_DYNAMIC_FTRACE
+0:	.long	ftrace_dyn_func
+#else
 0:	.long	ftrace_trace_function
+#endif
 1:	.long	function_trace_stop
 2:	l	%r2,1b-0b(%r1)
 	icm	%r2,0xf,0(%r2)
@@ -131,53 +47,13 @@ ftrace_caller:
 	l	%r14,0(%r14)
 	basr	%r14,%r14
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
+#ifdef CONFIG_DYNAMIC_FTRACE
 	.globl	ftrace_graph_caller
 ftrace_graph_caller:
 	# This unconditional branch gets runtime patched. Change only if
 	# you know what you are doing. See ftrace_enable_graph_caller().
 	j	1f
-	bras	%r1,0f
-	.long	prepare_ftrace_return
-0:	l	%r2,152(%r15)
-	l	%r4,0(%r1)
-	l	%r3,100(%r15)
-	basr	%r14,%r4
-	st	%r2,100(%r15)
-1:
 #endif
-	ahi	%r15,96
-	l	%r14,56(%r15)
-3:	lm	%r2,%r5,16(%r15)
-	br	%r14
-
-	.data
-	.globl	ftrace_dyn_func
-ftrace_dyn_func:
-	.long	ftrace_stub
-	.previous
-
-#else /* CONFIG_DYNAMIC_FTRACE */
-
-	.globl _mcount
-_mcount:
-	stm	%r2,%r5,16(%r15)
-	bras	%r1,2f
-0:	.long	ftrace_trace_function
-1:	.long	function_trace_stop
-2:	l	%r2,1b-0b(%r1)
-	icm	%r2,0xf,0(%r2)
-	jnz	3f
-	st	%r14,56(%r15)
-	lr	%r0,%r15
-	ahi	%r15,-96
-	l	%r3,100(%r15)
-	la	%r2,0(%r14)
-	st	%r0,__SF_BACKCHAIN(%r15)
-	la	%r3,0(%r3)
-	l	%r14,0b-0b(%r1)
-	l	%r14,0(%r14)
-	basr	%r14,%r14
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
 	bras	%r1,0f
 	.long	prepare_ftrace_return
 0:	l	%r2,152(%r15)
@@ -185,14 +61,13 @@ _mcount:
 	l	%r3,100(%r15)
 	basr	%r14,%r4
 	st	%r2,100(%r15)
+1:
 #endif
 	ahi	%r15,96
 	l	%r14,56(%r15)
 3:	lm	%r2,%r5,16(%r15)
 	br	%r14
 
-#endif /* CONFIG_DYNAMIC_FTRACE */
-
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 
 	.globl	return_to_handler
@@ -211,6 +86,4 @@ return_to_handler:
 	lm	%r2,%r5,16(%r15)
 	br	%r14
 
-#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
-
-#endif /* CONFIG_64BIT */
+#endif
diff --git a/arch/s390/kernel/mcount64.S b/arch/s390/kernel/mcount64.S
new file mode 100644
index 00000000000..c37211c6092
--- /dev/null
+++ b/arch/s390/kernel/mcount64.S
@@ -0,0 +1,78 @@
+/*
+ * Copyright IBM Corp. 2008,2009
+ *
+ *   Author(s): Heiko Carstens <heiko.carstens@de.ibm.com>,
+ *
+ */
+
+#include <asm/asm-offsets.h>
+
+	.globl ftrace_stub
+ftrace_stub:
+	br	%r14
+
+	.globl _mcount
+_mcount:
+#ifdef CONFIG_DYNAMIC_FTRACE
+	br	%r14
+
+	.data
+	.globl	ftrace_dyn_func
+ftrace_dyn_func:
+	.quad	ftrace_stub
+	.previous
+
+	.globl ftrace_caller
+ftrace_caller:
+#endif
+	larl	%r1,function_trace_stop
+	icm	%r1,0xf,0(%r1)
+	bnzr	%r14
+	stmg	%r2,%r5,32(%r15)
+	stg	%r14,112(%r15)
+	lgr	%r1,%r15
+	aghi	%r15,-160
+	stg	%r1,__SF_BACKCHAIN(%r15)
+	lgr	%r2,%r14
+	lg	%r3,168(%r15)
+#ifdef CONFIG_DYNAMIC_FTRACE
+	larl	%r14,ftrace_dyn_func
+#else
+	larl	%r14,ftrace_trace_function
+#endif
+	lg	%r14,0(%r14)
+	basr	%r14,%r14
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+#ifdef CONFIG_DYNAMIC_FTRACE
+	.globl	ftrace_graph_caller
+ftrace_graph_caller:
+	# This unconditional branch gets runtime patched. Change only if
+	# you know what you are doing. See ftrace_enable_graph_caller().
+	j	0f
+#endif
+	lg	%r2,272(%r15)
+	lg	%r3,168(%r15)
+	brasl	%r14,prepare_ftrace_return
+	stg	%r2,168(%r15)
+0:
+#endif
+	aghi	%r15,160
+	lmg	%r2,%r5,32(%r15)
+	lg	%r14,112(%r15)
+	br	%r14
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+
+	.globl	return_to_handler
+return_to_handler:
+	stmg	%r2,%r5,32(%r15)
+	lgr	%r1,%r15
+	aghi	%r15,-160
+	stg	%r1,__SF_BACKCHAIN(%r15)
+	brasl	%r14,ftrace_return_to_handler
+	aghi	%r15,160
+	lgr	%r14,%r2
+	lmg	%r2,%r5,32(%r15)
+	br	%r14
+
+#endif
-- 
cgit v1.2.3


From 12751058515860ed43c8f874ebcb2097b323736a Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Fri, 11 Sep 2009 10:28:34 +0200
Subject: [S390] atomic ops: add effecient atomic64 support for 31 bit

Use compare double and swap to implement efficient atomic64 ops for 31 bit.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/Kconfig              |   1 -
 arch/s390/include/asm/atomic.h | 164 +++++++++++++++++++++++++++++++----------
 2 files changed, 127 insertions(+), 38 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 2ae5d72f47e..47836b945d0 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -95,7 +95,6 @@ config S390
 	select HAVE_ARCH_TRACEHOOK
 	select INIT_ALL_POSSIBLE
 	select HAVE_PERF_COUNTERS
-	select GENERIC_ATOMIC64 if !64BIT
 
 config SCHED_OMIT_FRAME_POINTER
 	bool
diff --git a/arch/s390/include/asm/atomic.h b/arch/s390/include/asm/atomic.h
index c7d0abfb0f0..b491d5e963c 100644
--- a/arch/s390/include/asm/atomic.h
+++ b/arch/s390/include/asm/atomic.h
@@ -1,28 +1,20 @@
 #ifndef __ARCH_S390_ATOMIC__
 #define __ARCH_S390_ATOMIC__
 
-#include <linux/compiler.h>
-#include <linux/types.h>
-
 /*
- *  include/asm-s390/atomic.h
+ * Copyright 1999,2009 IBM Corp.
+ * Author(s): Martin Schwidefsky <schwidefsky@de.ibm.com>,
+ *	      Denis Joseph Barrow,
+ *	      Arnd Bergmann <arndb@de.ibm.com>,
  *
- *  S390 version
- *    Copyright (C) 1999-2005 IBM Deutschland Entwicklung GmbH, IBM Corporation
- *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com),
- *               Denis Joseph Barrow,
- *		 Arnd Bergmann (arndb@de.ibm.com)
- *
- *  Derived from "include/asm-i386/bitops.h"
- *    Copyright (C) 1992, Linus Torvalds
+ * Atomic operations that C can't guarantee us.
+ * Useful for resource counting etc.
+ * s390 uses 'Compare And Swap' for atomicity in SMP enviroment.
  *
  */
 
-/*
- * Atomic operations that C can't guarantee us.  Useful for
- * resource counting etc..
- * S390 uses 'Compare And Swap' for atomicity in SMP enviroment
- */
+#include <linux/compiler.h>
+#include <linux/types.h>
 
 #define ATOMIC_INIT(i)  { (i) }
 
@@ -146,9 +138,10 @@ static __inline__ int atomic_add_unless(atomic_t *v, int a, int u)
 
 #undef __CS_LOOP
 
-#ifdef __s390x__
 #define ATOMIC64_INIT(i)  { (i) }
 
+#ifdef CONFIG_64BIT
+
 #if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2)
 
 #define __CSG_LOOP(ptr, op_val, op_string) ({				\
@@ -202,21 +195,11 @@ static __inline__ long long atomic64_add_return(long long i, atomic64_t * v)
 {
 	return __CSG_LOOP(v, i, "agr");
 }
-#define atomic64_add(_i, _v)		atomic64_add_return(_i, _v)
-#define atomic64_add_negative(_i, _v)	(atomic64_add_return(_i, _v) < 0)
-#define atomic64_inc(_v)		atomic64_add_return(1, _v)
-#define atomic64_inc_return(_v)		atomic64_add_return(1, _v)
-#define atomic64_inc_and_test(_v)	(atomic64_add_return(1, _v) == 0)
 
 static __inline__ long long atomic64_sub_return(long long i, atomic64_t * v)
 {
 	return __CSG_LOOP(v, i, "sgr");
 }
-#define atomic64_sub(_i, _v)		atomic64_sub_return(_i, _v)
-#define atomic64_sub_and_test(_i, _v)	(atomic64_sub_return(_i, _v) == 0)
-#define atomic64_dec(_v)		atomic64_sub_return(1, _v)
-#define atomic64_dec_return(_v)		atomic64_sub_return(1, _v)
-#define atomic64_dec_and_test(_v)	(atomic64_sub_return(1, _v) == 0)
 
 static __inline__ void atomic64_clear_mask(unsigned long mask, atomic64_t * v)
 {
@@ -249,6 +232,111 @@ static __inline__ long long atomic64_cmpxchg(atomic64_t *v,
 	return old;
 }
 
+#undef __CSG_LOOP
+
+#else /* CONFIG_64BIT */
+
+typedef struct {
+	long long counter;
+} atomic64_t;
+
+static inline long long atomic64_read(const atomic64_t *v)
+{
+	register_pair rp;
+
+	asm volatile(
+		"	lm	%0,%N0,0(%1)"
+		: "=&d" (rp)
+		: "a" (&v->counter), "m" (v->counter)
+		);
+	return rp.pair;
+}
+
+static inline void atomic64_set(atomic64_t *v, long long i)
+{
+	register_pair rp = {.pair = i};
+
+	asm volatile(
+		"	stm	%1,%N1,0(%2)"
+		: "=m" (v->counter)
+		: "d" (rp), "a" (&v->counter)
+		);
+}
+
+static inline long long atomic64_xchg(atomic64_t *v, long long new)
+{
+	register_pair rp_new = {.pair = new};
+	register_pair rp_old;
+
+	asm volatile(
+		"	lm	%0,%N0,0(%2)\n"
+		"0:	cds	%0,%3,0(%2)\n"
+		"	jl	0b\n"
+		: "=&d" (rp_old), "+m" (v->counter)
+		: "a" (&v->counter), "d" (rp_new)
+		: "cc");
+	return rp_old.pair;
+}
+
+static inline long long atomic64_cmpxchg(atomic64_t *v,
+					 long long old, long long new)
+{
+	register_pair rp_old = {.pair = old};
+	register_pair rp_new = {.pair = new};
+
+	asm volatile(
+		"	cds	%0,%3,0(%2)"
+		: "+&d" (rp_old), "+m" (v->counter)
+		: "a" (&v->counter), "d" (rp_new)
+		: "cc");
+	return rp_old.pair;
+}
+
+
+static inline long long atomic64_add_return(long long i, atomic64_t *v)
+{
+	long long old, new;
+
+	do {
+		old = atomic64_read(v);
+		new = old + i;
+	} while (atomic64_cmpxchg(v, old, new) != old);
+	return new;
+}
+
+static inline long long atomic64_sub_return(long long i, atomic64_t *v)
+{
+	long long old, new;
+
+	do {
+		old = atomic64_read(v);
+		new = old - i;
+	} while (atomic64_cmpxchg(v, old, new) != old);
+	return new;
+}
+
+static inline void atomic64_set_mask(unsigned long long mask, atomic64_t *v)
+{
+	long long old, new;
+
+	do {
+		old = atomic64_read(v);
+		new = old | mask;
+	} while (atomic64_cmpxchg(v, old, new) != old);
+}
+
+static inline void atomic64_clear_mask(unsigned long long mask, atomic64_t *v)
+{
+	long long old, new;
+
+	do {
+		old = atomic64_read(v);
+		new = old & mask;
+	} while (atomic64_cmpxchg(v, old, new) != old);
+}
+
+#endif /* CONFIG_64BIT */
+
 static __inline__ int atomic64_add_unless(atomic64_t *v,
 					  long long a, long long u)
 {
@@ -265,15 +353,17 @@ static __inline__ int atomic64_add_unless(atomic64_t *v,
 	return c != u;
 }
 
-#define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0)
-
-#undef __CSG_LOOP
-
-#else /* __s390x__ */
-
-#include <asm-generic/atomic64.h>
-
-#endif /* __s390x__ */
+#define atomic64_add(_i, _v)		atomic64_add_return(_i, _v)
+#define atomic64_add_negative(_i, _v)	(atomic64_add_return(_i, _v) < 0)
+#define atomic64_inc(_v)		atomic64_add_return(1, _v)
+#define atomic64_inc_return(_v)		atomic64_add_return(1, _v)
+#define atomic64_inc_and_test(_v)	(atomic64_add_return(1, _v) == 0)
+#define atomic64_sub(_i, _v)		atomic64_sub_return(_i, _v)
+#define atomic64_sub_and_test(_i, _v)	(atomic64_sub_return(_i, _v) == 0)
+#define atomic64_dec(_v)		atomic64_sub_return(1, _v)
+#define atomic64_dec_return(_v)		atomic64_sub_return(1, _v)
+#define atomic64_dec_and_test(_v)	(atomic64_sub_return(1, _v) == 0)
+#define atomic64_inc_not_zero(v)	atomic64_add_unless((v), 1, 0)
 
 #define smp_mb__before_atomic_dec()	smp_mb()
 #define smp_mb__after_atomic_dec()	smp_mb()
-- 
cgit v1.2.3


From bfe3349b516df011dcf6462b0fd748a6f5c2e8af Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Fri, 11 Sep 2009 10:28:35 +0200
Subject: [S390] atomic ops: small cleanups

Couple of coding style fixes, replace __inline__ with inline and
remove #ifdef __KERNEL_- since the header file isn't exported.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/include/asm/atomic.h | 41 +++++++++++++++++++----------------------
 1 file changed, 19 insertions(+), 22 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/include/asm/atomic.h b/arch/s390/include/asm/atomic.h
index b491d5e963c..ae7c8f9f94a 100644
--- a/arch/s390/include/asm/atomic.h
+++ b/arch/s390/include/asm/atomic.h
@@ -18,8 +18,6 @@
 
 #define ATOMIC_INIT(i)  { (i) }
 
-#ifdef __KERNEL__
-
 #if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2)
 
 #define __CS_LOOP(ptr, op_val, op_string) ({				\
@@ -69,7 +67,7 @@ static inline void atomic_set(atomic_t *v, int i)
 	barrier();
 }
 
-static __inline__ int atomic_add_return(int i, atomic_t * v)
+static inline int atomic_add_return(int i, atomic_t *v)
 {
 	return __CS_LOOP(v, i, "ar");
 }
@@ -79,7 +77,7 @@ static __inline__ int atomic_add_return(int i, atomic_t * v)
 #define atomic_inc_return(_v)		atomic_add_return(1, _v)
 #define atomic_inc_and_test(_v)		(atomic_add_return(1, _v) == 0)
 
-static __inline__ int atomic_sub_return(int i, atomic_t * v)
+static inline int atomic_sub_return(int i, atomic_t *v)
 {
 	return __CS_LOOP(v, i, "sr");
 }
@@ -89,19 +87,19 @@ static __inline__ int atomic_sub_return(int i, atomic_t * v)
 #define atomic_dec_return(_v)		atomic_sub_return(1, _v)
 #define atomic_dec_and_test(_v)		(atomic_sub_return(1, _v) == 0)
 
-static __inline__ void atomic_clear_mask(unsigned long mask, atomic_t * v)
+static inline void atomic_clear_mask(unsigned long mask, atomic_t *v)
 {
-	       __CS_LOOP(v, ~mask, "nr");
+	__CS_LOOP(v, ~mask, "nr");
 }
 
-static __inline__ void atomic_set_mask(unsigned long mask, atomic_t * v)
+static inline void atomic_set_mask(unsigned long mask, atomic_t *v)
 {
-	       __CS_LOOP(v, mask, "or");
+	__CS_LOOP(v, mask, "or");
 }
 
 #define atomic_xchg(v, new) (xchg(&((v)->counter), new))
 
-static __inline__ int atomic_cmpxchg(atomic_t *v, int old, int new)
+static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
 {
 #if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2)
 	asm volatile(
@@ -119,7 +117,7 @@ static __inline__ int atomic_cmpxchg(atomic_t *v, int old, int new)
 	return old;
 }
 
-static __inline__ int atomic_add_unless(atomic_t *v, int a, int u)
+static inline int atomic_add_unless(atomic_t *v, int a, int u)
 {
 	int c, old;
 	c = atomic_read(v);
@@ -155,7 +153,7 @@ static __inline__ int atomic_add_unless(atomic_t *v, int a, int u)
 		: "=&d" (old_val), "=&d" (new_val),			\
 		  "=Q" (((atomic_t *)(ptr))->counter)			\
 		: "d" (op_val),	"Q" (((atomic_t *)(ptr))->counter)	\
-		: "cc", "memory" );					\
+		: "cc", "memory");					\
 	new_val;							\
 })
 
@@ -173,7 +171,7 @@ static __inline__ int atomic_add_unless(atomic_t *v, int a, int u)
 		  "=m" (((atomic_t *)(ptr))->counter)			\
 		: "a" (ptr), "d" (op_val),				\
 		  "m" (((atomic_t *)(ptr))->counter)			\
-		: "cc", "memory" );					\
+		: "cc", "memory");					\
 	new_val;							\
 })
 
@@ -191,29 +189,29 @@ static inline void atomic64_set(atomic64_t *v, long long i)
 	barrier();
 }
 
-static __inline__ long long atomic64_add_return(long long i, atomic64_t * v)
+static inline long long atomic64_add_return(long long i, atomic64_t *v)
 {
 	return __CSG_LOOP(v, i, "agr");
 }
 
-static __inline__ long long atomic64_sub_return(long long i, atomic64_t * v)
+static inline long long atomic64_sub_return(long long i, atomic64_t *v)
 {
 	return __CSG_LOOP(v, i, "sgr");
 }
 
-static __inline__ void atomic64_clear_mask(unsigned long mask, atomic64_t * v)
+static inline void atomic64_clear_mask(unsigned long mask, atomic64_t *v)
 {
-	       __CSG_LOOP(v, ~mask, "ngr");
+	__CSG_LOOP(v, ~mask, "ngr");
 }
 
-static __inline__ void atomic64_set_mask(unsigned long mask, atomic64_t * v)
+static inline void atomic64_set_mask(unsigned long mask, atomic64_t *v)
 {
-	       __CSG_LOOP(v, mask, "ogr");
+	__CSG_LOOP(v, mask, "ogr");
 }
 
 #define atomic64_xchg(v, new) (xchg(&((v)->counter), new))
 
-static __inline__ long long atomic64_cmpxchg(atomic64_t *v,
+static inline long long atomic64_cmpxchg(atomic64_t *v,
 					     long long old, long long new)
 {
 #if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2)
@@ -337,8 +335,7 @@ static inline void atomic64_clear_mask(unsigned long long mask, atomic64_t *v)
 
 #endif /* CONFIG_64BIT */
 
-static __inline__ int atomic64_add_unless(atomic64_t *v,
-					  long long a, long long u)
+static inline int atomic64_add_unless(atomic64_t *v, long long a, long long u)
 {
 	long long c, old;
 	c = atomic64_read(v);
@@ -371,5 +368,5 @@ static __inline__ int atomic64_add_unless(atomic64_t *v,
 #define smp_mb__after_atomic_inc()	smp_mb()
 
 #include <asm-generic/atomic-long.h>
-#endif /* __KERNEL__ */
+
 #endif /* __ARCH_S390_ATOMIC__  */
-- 
cgit v1.2.3


From f3d1263e81daf2be1353baf1ad3f6e25d135f2c5 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Fri, 11 Sep 2009 10:28:36 +0200
Subject: [S390] hibernation: remove dead file

There is no caller of do_after_copyback() anywhere. Remove it.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/power/Makefile    |  1 -
 arch/s390/power/swsusp_64.c | 17 -----------------
 2 files changed, 18 deletions(-)
 delete mode 100644 arch/s390/power/swsusp_64.c

(limited to 'arch')

diff --git a/arch/s390/power/Makefile b/arch/s390/power/Makefile
index 973bb45a8fe..ee2f279beff 100644
--- a/arch/s390/power/Makefile
+++ b/arch/s390/power/Makefile
@@ -4,5 +4,4 @@
 
 obj-$(CONFIG_HIBERNATION) += suspend.o
 obj-$(CONFIG_HIBERNATION) += swsusp.o
-obj-$(CONFIG_HIBERNATION) += swsusp_64.o
 obj-$(CONFIG_HIBERNATION) += swsusp_asm64.o
diff --git a/arch/s390/power/swsusp_64.c b/arch/s390/power/swsusp_64.c
deleted file mode 100644
index 9516a517d72..00000000000
--- a/arch/s390/power/swsusp_64.c
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * Support for suspend and resume on s390
- *
- * Copyright IBM Corp. 2009
- *
- * Author(s): Hans-Joachim Picht <hans@linux.vnet.ibm.com>
- *
- */
-
-#include <asm/system.h>
-#include <linux/interrupt.h>
-
-void do_after_copyback(void)
-{
-	mb();
-}
-
-- 
cgit v1.2.3


From c48ff644f2c86f34f69f382b68b16c6d30854783 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Fri, 11 Sep 2009 10:28:37 +0200
Subject: [S390] hibernation: merge files and move to kernel/

Merge the nearly empty C files and move everything from power/ to
kernel/. That way the files are easier to handle.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/Makefile              |   3 +-
 arch/s390/kernel/Makefile       |   2 +-
 arch/s390/kernel/suspend.c      |  73 ++++++++++++++++
 arch/s390/kernel/swsusp_asm64.S | 184 ++++++++++++++++++++++++++++++++++++++++
 arch/s390/power/Makefile        |   7 --
 arch/s390/power/suspend.c       |  40 ---------
 arch/s390/power/swsusp.c        |  42 ---------
 arch/s390/power/swsusp_asm64.S  | 184 ----------------------------------------
 8 files changed, 259 insertions(+), 276 deletions(-)
 create mode 100644 arch/s390/kernel/suspend.c
 create mode 100644 arch/s390/kernel/swsusp_asm64.S
 delete mode 100644 arch/s390/power/Makefile
 delete mode 100644 arch/s390/power/suspend.c
 delete mode 100644 arch/s390/power/swsusp.c
 delete mode 100644 arch/s390/power/swsusp_asm64.S

(limited to 'arch')

diff --git a/arch/s390/Makefile b/arch/s390/Makefile
index 0ff387cebf8..fc8fb20e7fc 100644
--- a/arch/s390/Makefile
+++ b/arch/s390/Makefile
@@ -88,8 +88,7 @@ LDFLAGS_vmlinux := -e start
 head-y		:= arch/s390/kernel/head.o arch/s390/kernel/init_task.o
 
 core-y		+= arch/s390/mm/ arch/s390/kernel/ arch/s390/crypto/ \
-		   arch/s390/appldata/ arch/s390/hypfs/ arch/s390/kvm/ \
-		   arch/s390/power/
+		   arch/s390/appldata/ arch/s390/hypfs/ arch/s390/kvm/
 
 libs-y		+= arch/s390/lib/
 drivers-y	+= drivers/s390/
diff --git a/arch/s390/kernel/Makefile b/arch/s390/kernel/Makefile
index 794955305f3..c7be8e10b87 100644
--- a/arch/s390/kernel/Makefile
+++ b/arch/s390/kernel/Makefile
@@ -32,7 +32,7 @@ extra-y				+= head.o init_task.o vmlinux.lds
 
 obj-$(CONFIG_MODULES)		+= s390_ksyms.o module.o
 obj-$(CONFIG_SMP)		+= smp.o topology.o
-
+obj-$(CONFIG_HIBERNATION)	+= suspend.o swsusp_asm64.o
 obj-$(CONFIG_AUDIT)		+= audit.o
 compat-obj-$(CONFIG_AUDIT)	+= compat_audit.o
 obj-$(CONFIG_COMPAT)		+= compat_linux.o compat_signal.o \
diff --git a/arch/s390/kernel/suspend.c b/arch/s390/kernel/suspend.c
new file mode 100644
index 00000000000..086bee970ca
--- /dev/null
+++ b/arch/s390/kernel/suspend.c
@@ -0,0 +1,73 @@
+/*
+ * Suspend support specific for s390.
+ *
+ * Copyright IBM Corp. 2009
+ *
+ * Author(s): Hans-Joachim Picht <hans@linux.vnet.ibm.com>
+ */
+
+#include <linux/suspend.h>
+#include <linux/reboot.h>
+#include <linux/pfn.h>
+#include <linux/mm.h>
+#include <asm/sections.h>
+#include <asm/system.h>
+#include <asm/ipl.h>
+
+/*
+ * References to section boundaries
+ */
+extern const void __nosave_begin, __nosave_end;
+
+/*
+ *  check if given pfn is in the 'nosave' or in the read only NSS section
+ */
+int pfn_is_nosave(unsigned long pfn)
+{
+	unsigned long nosave_begin_pfn = __pa(&__nosave_begin) >> PAGE_SHIFT;
+	unsigned long nosave_end_pfn = PAGE_ALIGN(__pa(&__nosave_end))
+					>> PAGE_SHIFT;
+	unsigned long eshared_pfn = PFN_DOWN(__pa(&_eshared)) - 1;
+	unsigned long stext_pfn = PFN_DOWN(__pa(&_stext));
+
+	if (pfn >= nosave_begin_pfn && pfn < nosave_end_pfn)
+		return 1;
+	if (pfn >= stext_pfn && pfn <= eshared_pfn) {
+		if (ipl_info.type == IPL_TYPE_NSS)
+			return 1;
+	} else if ((tprot(pfn * PAGE_SIZE) && pfn > 0))
+		return 1;
+	return 0;
+}
+
+void save_processor_state(void)
+{
+	/* swsusp_arch_suspend() actually saves all cpu register contents.
+	 * Machine checks must be disabled since swsusp_arch_suspend() stores
+	 * register contents to their lowcore save areas. That's the same
+	 * place where register contents on machine checks would be saved.
+	 * To avoid register corruption disable machine checks.
+	 * We must also disable machine checks in the new psw mask for
+	 * program checks, since swsusp_arch_suspend() may generate program
+	 * checks. Disabling machine checks for all other new psw masks is
+	 * just paranoia.
+	 */
+	local_mcck_disable();
+	/* Disable lowcore protection */
+	__ctl_clear_bit(0,28);
+	S390_lowcore.external_new_psw.mask &= ~PSW_MASK_MCHECK;
+	S390_lowcore.svc_new_psw.mask &= ~PSW_MASK_MCHECK;
+	S390_lowcore.io_new_psw.mask &= ~PSW_MASK_MCHECK;
+	S390_lowcore.program_new_psw.mask &= ~PSW_MASK_MCHECK;
+}
+
+void restore_processor_state(void)
+{
+	S390_lowcore.external_new_psw.mask |= PSW_MASK_MCHECK;
+	S390_lowcore.svc_new_psw.mask |= PSW_MASK_MCHECK;
+	S390_lowcore.io_new_psw.mask |= PSW_MASK_MCHECK;
+	S390_lowcore.program_new_psw.mask |= PSW_MASK_MCHECK;
+	/* Enable lowcore protection */
+	__ctl_set_bit(0,28);
+	local_mcck_enable();
+}
diff --git a/arch/s390/kernel/swsusp_asm64.S b/arch/s390/kernel/swsusp_asm64.S
new file mode 100644
index 00000000000..7cd6b096f0d
--- /dev/null
+++ b/arch/s390/kernel/swsusp_asm64.S
@@ -0,0 +1,184 @@
+/*
+ * S390 64-bit swsusp implementation
+ *
+ * Copyright IBM Corp. 2009
+ *
+ * Author(s): Hans-Joachim Picht <hans@linux.vnet.ibm.com>
+ *	      Michael Holzheu <holzheu@linux.vnet.ibm.com>
+ */
+
+#include <asm/page.h>
+#include <asm/ptrace.h>
+#include <asm/asm-offsets.h>
+
+/*
+ * Save register context in absolute 0 lowcore and call swsusp_save() to
+ * create in-memory kernel image. The context is saved in the designated
+ * "store status" memory locations (see POP).
+ * We return from this function twice. The first time during the suspend to
+ * disk process. The second time via the swsusp_arch_resume() function
+ * (see below) in the resume process.
+ * This function runs with disabled interrupts.
+ */
+	.section .text
+	.align	4
+	.globl swsusp_arch_suspend
+swsusp_arch_suspend:
+	stmg	%r6,%r15,__SF_GPRS(%r15)
+	lgr	%r1,%r15
+	aghi	%r15,-STACK_FRAME_OVERHEAD
+	stg	%r1,__SF_BACKCHAIN(%r15)
+
+	/* Deactivate DAT */
+	stnsm	__SF_EMPTY(%r15),0xfb
+
+	/* Store prefix register on stack */
+	stpx	__SF_EMPTY(%r15)
+
+	/* Save prefix register contents for lowcore */
+	llgf	%r4,__SF_EMPTY(%r15)
+
+	/* Get pointer to save area */
+	lghi	%r1,0x1000
+
+	/* Store registers */
+	mvc	0x318(4,%r1),__SF_EMPTY(%r15)	/* move prefix to lowcore */
+	stfpc	0x31c(%r1)			/* store fpu control */
+	std	0,0x200(%r1)			/* store f0 */
+	std	1,0x208(%r1)			/* store f1 */
+	std	2,0x210(%r1)			/* store f2 */
+	std	3,0x218(%r1)			/* store f3 */
+	std	4,0x220(%r1)			/* store f4 */
+	std	5,0x228(%r1)			/* store f5 */
+	std	6,0x230(%r1)			/* store f6 */
+	std	7,0x238(%r1)			/* store f7 */
+	std	8,0x240(%r1)			/* store f8 */
+	std	9,0x248(%r1)			/* store f9 */
+	std	10,0x250(%r1)			/* store f10 */
+	std	11,0x258(%r1)			/* store f11 */
+	std	12,0x260(%r1)			/* store f12 */
+	std	13,0x268(%r1)			/* store f13 */
+	std	14,0x270(%r1)			/* store f14 */
+	std	15,0x278(%r1)			/* store f15 */
+	stam	%a0,%a15,0x340(%r1)		/* store access registers */
+	stctg	%c0,%c15,0x380(%r1)		/* store control registers */
+	stmg	%r0,%r15,0x280(%r1)		/* store general registers */
+
+	stpt	0x328(%r1)			/* store timer */
+	stckc	0x330(%r1)			/* store clock comparator */
+
+	/* Activate DAT */
+	stosm	__SF_EMPTY(%r15),0x04
+
+	/* Set prefix page to zero */
+	xc	__SF_EMPTY(4,%r15),__SF_EMPTY(%r15)
+	spx	__SF_EMPTY(%r15)
+
+	lghi	%r2,0
+	lghi	%r3,2*PAGE_SIZE
+	lghi	%r5,2*PAGE_SIZE
+1:	mvcle	%r2,%r4,0
+	jo	1b
+
+	/* Save image */
+	brasl	%r14,swsusp_save
+
+	/* Restore prefix register and return */
+	lghi	%r1,0x1000
+	spx	0x318(%r1)
+	lmg	%r6,%r15,STACK_FRAME_OVERHEAD + __SF_GPRS(%r15)
+	lghi	%r2,0
+	br	%r14
+
+/*
+ * Restore saved memory image to correct place and restore register context.
+ * Then we return to the function that called swsusp_arch_suspend().
+ * swsusp_arch_resume() runs with disabled interrupts.
+ */
+	.globl swsusp_arch_resume
+swsusp_arch_resume:
+	stmg	%r6,%r15,__SF_GPRS(%r15)
+	lgr	%r1,%r15
+	aghi	%r15,-STACK_FRAME_OVERHEAD
+	stg	%r1,__SF_BACKCHAIN(%r15)
+
+#ifdef CONFIG_SMP
+	/* Save boot cpu number */
+	brasl	%r14,smp_get_phys_cpu_id
+	lgr	%r10,%r2
+#endif
+	/* Deactivate DAT */
+	stnsm	__SF_EMPTY(%r15),0xfb
+
+	/* Set prefix page to zero */
+	xc	__SF_EMPTY(4,%r15),__SF_EMPTY(%r15)
+	spx	__SF_EMPTY(%r15)
+
+	/* Restore saved image */
+	larl	%r1,restore_pblist
+	lg	%r1,0(%r1)
+	ltgr	%r1,%r1
+	jz	2f
+0:
+	lg	%r2,8(%r1)
+	lg	%r4,0(%r1)
+	lghi	%r3,PAGE_SIZE
+	lghi	%r5,PAGE_SIZE
+1:
+	mvcle	%r2,%r4,0
+	jo	1b
+	lg	%r1,16(%r1)
+	ltgr	%r1,%r1
+	jnz	0b
+2:
+	ptlb				/* flush tlb */
+
+	/* Restore registers */
+	lghi	%r13,0x1000		/* %r1 = pointer to save arae */
+
+	spt	0x328(%r13)		/* reprogram timer */
+	//sckc	0x330(%r13)		/* set clock comparator */
+
+	lctlg	%c0,%c15,0x380(%r13)	/* load control registers */
+	lam	%a0,%a15,0x340(%r13)	/* load access registers */
+
+	lfpc	0x31c(%r13)		/* load fpu control */
+	ld	0,0x200(%r13)		/* load f0 */
+	ld	1,0x208(%r13)		/* load f1 */
+	ld	2,0x210(%r13)		/* load f2 */
+	ld	3,0x218(%r13)		/* load f3 */
+	ld	4,0x220(%r13)		/* load f4 */
+	ld	5,0x228(%r13)		/* load f5 */
+	ld	6,0x230(%r13)		/* load f6 */
+	ld	7,0x238(%r13)		/* load f7 */
+	ld	8,0x240(%r13)		/* load f8 */
+	ld	9,0x248(%r13)		/* load f9 */
+	ld	10,0x250(%r13)		/* load f10 */
+	ld	11,0x258(%r13)		/* load f11 */
+	ld	12,0x260(%r13)		/* load f12 */
+	ld	13,0x268(%r13)		/* load f13 */
+	ld	14,0x270(%r13)		/* load f14 */
+	ld	15,0x278(%r13)		/* load f15 */
+
+	/* Load old stack */
+	lg	%r15,0x2f8(%r13)
+
+	/* Pointer to save area */
+	lghi	%r13,0x1000
+
+#ifdef CONFIG_SMP
+	/* Switch CPUs */
+	lgr	%r2,%r10		/* get cpu id */
+	llgf	%r3,0x318(%r13)
+	brasl	%r14,smp_switch_boot_cpu_in_resume
+#endif
+	/* Restore prefix register */
+	spx	0x318(%r13)
+
+	/* Activate DAT */
+	stosm	__SF_EMPTY(%r15),0x04
+
+	/* Return 0 */
+	lmg	%r6,%r15,STACK_FRAME_OVERHEAD + __SF_GPRS(%r15)
+	lghi	%r2,0
+	br	%r14
diff --git a/arch/s390/power/Makefile b/arch/s390/power/Makefile
deleted file mode 100644
index ee2f279beff..00000000000
--- a/arch/s390/power/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-#
-# Makefile for s390 PM support
-#
-
-obj-$(CONFIG_HIBERNATION) += suspend.o
-obj-$(CONFIG_HIBERNATION) += swsusp.o
-obj-$(CONFIG_HIBERNATION) += swsusp_asm64.o
diff --git a/arch/s390/power/suspend.c b/arch/s390/power/suspend.c
deleted file mode 100644
index b3351eceebb..00000000000
--- a/arch/s390/power/suspend.c
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * Suspend support specific for s390.
- *
- * Copyright IBM Corp. 2009
- *
- * Author(s): Hans-Joachim Picht <hans@linux.vnet.ibm.com>
- */
-
-#include <linux/mm.h>
-#include <linux/suspend.h>
-#include <linux/reboot.h>
-#include <linux/pfn.h>
-#include <asm/sections.h>
-#include <asm/ipl.h>
-
-/*
- * References to section boundaries
- */
-extern const void __nosave_begin, __nosave_end;
-
-/*
- *  check if given pfn is in the 'nosave' or in the read only NSS section
- */
-int pfn_is_nosave(unsigned long pfn)
-{
-	unsigned long nosave_begin_pfn = __pa(&__nosave_begin) >> PAGE_SHIFT;
-	unsigned long nosave_end_pfn = PAGE_ALIGN(__pa(&__nosave_end))
-					>> PAGE_SHIFT;
-	unsigned long eshared_pfn = PFN_DOWN(__pa(&_eshared)) - 1;
-	unsigned long stext_pfn = PFN_DOWN(__pa(&_stext));
-
-	if (pfn >= nosave_begin_pfn && pfn < nosave_end_pfn)
-		return 1;
-	if (pfn >= stext_pfn && pfn <= eshared_pfn) {
-		if (ipl_info.type == IPL_TYPE_NSS)
-			return 1;
-	} else if ((tprot(pfn * PAGE_SIZE) && pfn > 0))
-		return 1;
-	return 0;
-}
diff --git a/arch/s390/power/swsusp.c b/arch/s390/power/swsusp.c
deleted file mode 100644
index bd1f5c6b0b8..00000000000
--- a/arch/s390/power/swsusp.c
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * Support for suspend and resume on s390
- *
- * Copyright IBM Corp. 2009
- *
- * Author(s): Hans-Joachim Picht <hans@linux.vnet.ibm.com>
- *
- */
-
-#include <asm/system.h>
-
-void save_processor_state(void)
-{
-	/* swsusp_arch_suspend() actually saves all cpu register contents.
-	 * Machine checks must be disabled since swsusp_arch_suspend() stores
-	 * register contents to their lowcore save areas. That's the same
-	 * place where register contents on machine checks would be saved.
-	 * To avoid register corruption disable machine checks.
-	 * We must also disable machine checks in the new psw mask for
-	 * program checks, since swsusp_arch_suspend() may generate program
-	 * checks. Disabling machine checks for all other new psw masks is
-	 * just paranoia.
-	 */
-	local_mcck_disable();
-	/* Disable lowcore protection */
-	__ctl_clear_bit(0,28);
-	S390_lowcore.external_new_psw.mask &= ~PSW_MASK_MCHECK;
-	S390_lowcore.svc_new_psw.mask &= ~PSW_MASK_MCHECK;
-	S390_lowcore.io_new_psw.mask &= ~PSW_MASK_MCHECK;
-	S390_lowcore.program_new_psw.mask &= ~PSW_MASK_MCHECK;
-}
-
-void restore_processor_state(void)
-{
-	S390_lowcore.external_new_psw.mask |= PSW_MASK_MCHECK;
-	S390_lowcore.svc_new_psw.mask |= PSW_MASK_MCHECK;
-	S390_lowcore.io_new_psw.mask |= PSW_MASK_MCHECK;
-	S390_lowcore.program_new_psw.mask |= PSW_MASK_MCHECK;
-	/* Enable lowcore protection */
-	__ctl_set_bit(0,28);
-	local_mcck_enable();
-}
diff --git a/arch/s390/power/swsusp_asm64.S b/arch/s390/power/swsusp_asm64.S
deleted file mode 100644
index b26df5c5933..00000000000
--- a/arch/s390/power/swsusp_asm64.S
+++ /dev/null
@@ -1,184 +0,0 @@
-/*
- * S390 64-bit swsusp implementation
- *
- * Copyright IBM Corp. 2009
- *
- * Author(s): Hans-Joachim Picht <hans@linux.vnet.ibm.com>
- *	      Michael Holzheu <holzheu@linux.vnet.ibm.com>
- */
-
-#include <asm/page.h>
-#include <asm/ptrace.h>
-#include <asm/asm-offsets.h>
-
-/*
- * Save register context in absolute 0 lowcore and call swsusp_save() to
- * create in-memory kernel image. The context is saved in the designated
- * "store status" memory locations (see POP).
- * We return from this function twice. The first time during the suspend to
- * disk process. The second time via the swsusp_arch_resume() function
- * (see below) in the resume process.
- * This function runs with disabled interrupts.
- */
-	.section .text
-	.align	2
-	.globl swsusp_arch_suspend
-swsusp_arch_suspend:
-	stmg	%r6,%r15,__SF_GPRS(%r15)
-	lgr	%r1,%r15
-	aghi	%r15,-STACK_FRAME_OVERHEAD
-	stg	%r1,__SF_BACKCHAIN(%r15)
-
-	/* Deactivate DAT */
-	stnsm	__SF_EMPTY(%r15),0xfb
-
-	/* Store prefix register on stack */
-	stpx	__SF_EMPTY(%r15)
-
-	/* Save prefix register contents for lowcore */
-	llgf	%r4,__SF_EMPTY(%r15)
-
-	/* Get pointer to save area */
-	lghi	%r1,0x1000
-
-	/* Store registers */
-	mvc	0x318(4,%r1),__SF_EMPTY(%r15)	/* move prefix to lowcore */
-	stfpc	0x31c(%r1)			/* store fpu control */
-	std	0,0x200(%r1)			/* store f0 */
-	std	1,0x208(%r1)			/* store f1 */
-	std	2,0x210(%r1)			/* store f2 */
-	std	3,0x218(%r1)			/* store f3 */
-	std	4,0x220(%r1)			/* store f4 */
-	std	5,0x228(%r1)			/* store f5 */
-	std	6,0x230(%r1)			/* store f6 */
-	std	7,0x238(%r1)			/* store f7 */
-	std	8,0x240(%r1)			/* store f8 */
-	std	9,0x248(%r1)			/* store f9 */
-	std	10,0x250(%r1)			/* store f10 */
-	std	11,0x258(%r1)			/* store f11 */
-	std	12,0x260(%r1)			/* store f12 */
-	std	13,0x268(%r1)			/* store f13 */
-	std	14,0x270(%r1)			/* store f14 */
-	std	15,0x278(%r1)			/* store f15 */
-	stam	%a0,%a15,0x340(%r1)		/* store access registers */
-	stctg	%c0,%c15,0x380(%r1)		/* store control registers */
-	stmg	%r0,%r15,0x280(%r1)		/* store general registers */
-
-	stpt	0x328(%r1)			/* store timer */
-	stckc	0x330(%r1)			/* store clock comparator */
-
-	/* Activate DAT */
-	stosm	__SF_EMPTY(%r15),0x04
-
-	/* Set prefix page to zero */
-	xc	__SF_EMPTY(4,%r15),__SF_EMPTY(%r15)
-	spx	__SF_EMPTY(%r15)
-
-	lghi	%r2,0
-	lghi	%r3,2*PAGE_SIZE
-	lghi	%r5,2*PAGE_SIZE
-1:	mvcle	%r2,%r4,0
-	jo	1b
-
-	/* Save image */
-	brasl	%r14,swsusp_save
-
-	/* Restore prefix register and return */
-	lghi	%r1,0x1000
-	spx	0x318(%r1)
-	lmg	%r6,%r15,STACK_FRAME_OVERHEAD + __SF_GPRS(%r15)
-	lghi	%r2,0
-	br	%r14
-
-/*
- * Restore saved memory image to correct place and restore register context.
- * Then we return to the function that called swsusp_arch_suspend().
- * swsusp_arch_resume() runs with disabled interrupts.
- */
-	.globl swsusp_arch_resume
-swsusp_arch_resume:
-	stmg	%r6,%r15,__SF_GPRS(%r15)
-	lgr	%r1,%r15
-	aghi	%r15,-STACK_FRAME_OVERHEAD
-	stg	%r1,__SF_BACKCHAIN(%r15)
-
-#ifdef CONFIG_SMP
-	/* Save boot cpu number */
-	brasl	%r14,smp_get_phys_cpu_id
-	lgr	%r10,%r2
-#endif
-	/* Deactivate DAT */
-	stnsm	__SF_EMPTY(%r15),0xfb
-
-	/* Set prefix page to zero */
-	xc	__SF_EMPTY(4,%r15),__SF_EMPTY(%r15)
-	spx	__SF_EMPTY(%r15)
-
-	/* Restore saved image */
-	larl	%r1,restore_pblist
-	lg	%r1,0(%r1)
-	ltgr	%r1,%r1
-	jz	2f
-0:
-	lg	%r2,8(%r1)
-	lg	%r4,0(%r1)
-	lghi	%r3,PAGE_SIZE
-	lghi	%r5,PAGE_SIZE
-1:
-	mvcle	%r2,%r4,0
-	jo	1b
-	lg	%r1,16(%r1)
-	ltgr	%r1,%r1
-	jnz	0b
-2:
-	ptlb				/* flush tlb */
-
-	/* Restore registers */
-	lghi	%r13,0x1000		/* %r1 = pointer to save arae */
-
-	spt	0x328(%r13)		/* reprogram timer */
-	//sckc	0x330(%r13)		/* set clock comparator */
-
-	lctlg	%c0,%c15,0x380(%r13)	/* load control registers */
-	lam	%a0,%a15,0x340(%r13)	/* load access registers */
-
-	lfpc	0x31c(%r13)		/* load fpu control */
-	ld	0,0x200(%r13)		/* load f0 */
-	ld	1,0x208(%r13)		/* load f1 */
-	ld	2,0x210(%r13)		/* load f2 */
-	ld	3,0x218(%r13)		/* load f3 */
-	ld	4,0x220(%r13)		/* load f4 */
-	ld	5,0x228(%r13)		/* load f5 */
-	ld	6,0x230(%r13)		/* load f6 */
-	ld	7,0x238(%r13)		/* load f7 */
-	ld	8,0x240(%r13)		/* load f8 */
-	ld	9,0x248(%r13)		/* load f9 */
-	ld	10,0x250(%r13)		/* load f10 */
-	ld	11,0x258(%r13)		/* load f11 */
-	ld	12,0x260(%r13)		/* load f12 */
-	ld	13,0x268(%r13)		/* load f13 */
-	ld	14,0x270(%r13)		/* load f14 */
-	ld	15,0x278(%r13)		/* load f15 */
-
-	/* Load old stack */
-	lg	%r15,0x2f8(%r13)
-
-	/* Pointer to save area */
-	lghi	%r13,0x1000
-
-#ifdef CONFIG_SMP
-	/* Switch CPUs */
-	lgr	%r2,%r10		/* get cpu id */
-	llgf	%r3,0x318(%r13)
-	brasl	%r14,smp_switch_boot_cpu_in_resume
-#endif
-	/* Restore prefix register */
-	spx	0x318(%r13)
-
-	/* Activate DAT */
-	stosm	__SF_EMPTY(%r15),0x04
-
-	/* Return 0 */
-	lmg	%r6,%r15,STACK_FRAME_OVERHEAD + __SF_GPRS(%r15)
-	lghi	%r2,0
-	br	%r14
-- 
cgit v1.2.3


From 684d2fd48e718e70dad21ef7c528649578147e48 Mon Sep 17 00:00:00 2001
From: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Date: Fri, 11 Sep 2009 10:28:40 +0200
Subject: [S390] kernel: Append scpdata to kernel boot command line

Append scpdata to the kernel boot command line. If scpdata starts
with the equal sign (=), the kernel boot command line is replaced.
(For consistency with zIPL and IPL PARM parameters.)

To use scpdata for the kernel boot command line, scpdata must consist
of ascii characters only. If scpdata contains other characters,
scpdata is not appended to the kernel boot command line.
In addition, re-IPL is extended for setting scpdata for the next
Linux reboot.

Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/include/asm/ipl.h   |   5 +-
 arch/s390/include/asm/setup.h |   2 +-
 arch/s390/kernel/early.c      |  35 +++++++---
 arch/s390/kernel/ipl.c        | 157 ++++++++++++++++++++++++++++++++++++++----
 4 files changed, 172 insertions(+), 27 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/include/asm/ipl.h b/arch/s390/include/asm/ipl.h
index 1171e6d144a..5e95d95450b 100644
--- a/arch/s390/include/asm/ipl.h
+++ b/arch/s390/include/asm/ipl.h
@@ -57,6 +57,8 @@ struct ipl_block_fcp {
 } __attribute__((packed));
 
 #define DIAG308_VMPARM_SIZE	64
+#define DIAG308_SCPDATA_SIZE	(PAGE_SIZE - (sizeof(struct ipl_list_hdr) + \
+				 offsetof(struct ipl_block_fcp, scp_data)))
 
 struct ipl_block_ccw {
 	u8  load_parm[8];
@@ -91,7 +93,8 @@ extern void do_halt(void);
 extern void do_poff(void);
 extern void ipl_save_parameters(void);
 extern void ipl_update_parameters(void);
-extern void get_ipl_vmparm(char *);
+extern size_t append_ipl_vmparm(char *, size_t);
+extern size_t append_ipl_scpdata(char *, size_t);
 
 enum {
 	IPL_DEVNO_VALID		= 1,
diff --git a/arch/s390/include/asm/setup.h b/arch/s390/include/asm/setup.h
index 38b0fc221ed..e37478e8728 100644
--- a/arch/s390/include/asm/setup.h
+++ b/arch/s390/include/asm/setup.h
@@ -8,7 +8,7 @@
 #ifndef _ASM_S390_SETUP_H
 #define _ASM_S390_SETUP_H
 
-#define COMMAND_LINE_SIZE	1024
+#define COMMAND_LINE_SIZE	4096
 
 #define ARCH_COMMAND_LINE_SIZE	896
 
diff --git a/arch/s390/kernel/early.c b/arch/s390/kernel/early.c
index cae14c49951..21f3799fe27 100644
--- a/arch/s390/kernel/early.c
+++ b/arch/s390/kernel/early.c
@@ -81,6 +81,8 @@ asm(
 	"	br	14\n"
 	"	.size	savesys_ipl_nss, .-savesys_ipl_nss\n");
 
+static __initdata char upper_command_line[COMMAND_LINE_SIZE];
+
 static noinline __init void create_kernel_nss(void)
 {
 	unsigned int i, stext_pfn, eshared_pfn, end_pfn, min_size;
@@ -90,7 +92,6 @@ static noinline __init void create_kernel_nss(void)
 	int response;
 	size_t len;
 	char *savesys_ptr;
-	char upper_command_line[COMMAND_LINE_SIZE];
 	char defsys_cmd[DEFSYS_CMD_SIZE];
 	char savesys_cmd[SAVESYS_CMD_SIZE];
 
@@ -367,21 +368,35 @@ static __init void rescue_initrd(void)
 }
 
 /* Set up boot command line */
-static void __init setup_boot_command_line(void)
+static void __init append_to_cmdline(size_t (*ipl_data)(char *, size_t))
 {
-	char *parm = NULL;
+	char *parm, *delim;
+	size_t rc, len;
+
+	len = strlen(boot_command_line);
 
+	delim = boot_command_line + len;	/* '\0' character position */
+	parm  = boot_command_line + len + 1;	/* append right after '\0' */
+
+	rc = ipl_data(parm, COMMAND_LINE_SIZE - len - 1);
+	if (rc) {
+		if (*parm == '=')
+			memmove(boot_command_line, parm + 1, rc);
+		else
+			*delim = ' ';		/* replace '\0' with space */
+	}
+}
+
+static void __init setup_boot_command_line(void)
+{
 	/* copy arch command line */
 	strlcpy(boot_command_line, COMMAND_LINE, ARCH_COMMAND_LINE_SIZE);
 
 	/* append IPL PARM data to the boot command line */
-	if (MACHINE_IS_VM) {
-		parm = boot_command_line + strlen(boot_command_line);
-		*parm++ = ' ';
-		get_ipl_vmparm(parm);
-		if (parm[0] == '=')
-			memmove(boot_command_line, parm + 1, strlen(parm));
-	}
+	if (MACHINE_IS_VM)
+		append_to_cmdline(append_ipl_vmparm);
+
+	append_to_cmdline(append_ipl_scpdata);
 }
 
 
diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c
index 371a2d88f4a..04451a5e3c1 100644
--- a/arch/s390/kernel/ipl.c
+++ b/arch/s390/kernel/ipl.c
@@ -272,17 +272,18 @@ static ssize_t ipl_type_show(struct kobject *kobj, struct kobj_attribute *attr,
 static struct kobj_attribute sys_ipl_type_attr = __ATTR_RO(ipl_type);
 
 /* VM IPL PARM routines */
-static void reipl_get_ascii_vmparm(char *dest,
+size_t reipl_get_ascii_vmparm(char *dest, size_t size,
 				   const struct ipl_parameter_block *ipb)
 {
 	int i;
-	int len = 0;
+	size_t len;
 	char has_lowercase = 0;
 
+	len = 0;
 	if ((ipb->ipl_info.ccw.vm_flags & DIAG308_VM_FLAGS_VP_VALID) &&
 	    (ipb->ipl_info.ccw.vm_parm_len > 0)) {
 
-		len = ipb->ipl_info.ccw.vm_parm_len;
+		len = min_t(size_t, size - 1, ipb->ipl_info.ccw.vm_parm_len);
 		memcpy(dest, ipb->ipl_info.ccw.vm_parm, len);
 		/* If at least one character is lowercase, we assume mixed
 		 * case; otherwise we convert everything to lowercase.
@@ -299,14 +300,20 @@ static void reipl_get_ascii_vmparm(char *dest,
 		EBCASC(dest, len);
 	}
 	dest[len] = 0;
+
+	return len;
 }
 
-void get_ipl_vmparm(char *dest)
+size_t append_ipl_vmparm(char *dest, size_t size)
 {
+	size_t rc;
+
+	rc = 0;
 	if (diag308_set_works && (ipl_block.hdr.pbt == DIAG308_IPL_TYPE_CCW))
-		reipl_get_ascii_vmparm(dest, &ipl_block);
+		rc = reipl_get_ascii_vmparm(dest, size, &ipl_block);
 	else
 		dest[0] = 0;
+	return rc;
 }
 
 static ssize_t ipl_vm_parm_show(struct kobject *kobj,
@@ -314,10 +321,56 @@ static ssize_t ipl_vm_parm_show(struct kobject *kobj,
 {
 	char parm[DIAG308_VMPARM_SIZE + 1] = {};
 
-	get_ipl_vmparm(parm);
+	append_ipl_vmparm(parm, sizeof(parm));
 	return sprintf(page, "%s\n", parm);
 }
 
+static size_t scpdata_length(const char* buf, size_t count)
+{
+	while (count) {
+		if (buf[count - 1] != '\0' && buf[count - 1] != ' ')
+			break;
+		count--;
+	}
+	return count;
+}
+
+size_t reipl_append_ascii_scpdata(char *dest, size_t size,
+				  const struct ipl_parameter_block *ipb)
+{
+	size_t count;
+	size_t i;
+
+	count = min(size - 1, scpdata_length(ipb->ipl_info.fcp.scp_data,
+					     ipb->ipl_info.fcp.scp_data_len));
+	if (!count)
+		goto out;
+
+	for (i = 0; i < count; i++)
+		if (!isascii(ipb->ipl_info.fcp.scp_data[i])) {
+			count = 0;
+			goto out;
+		}
+
+	memcpy(dest, ipb->ipl_info.fcp.scp_data, count);
+out:
+	dest[count] = '\0';
+	return count;
+}
+
+size_t append_ipl_scpdata(char *dest, size_t len)
+{
+	size_t rc;
+
+	rc = 0;
+	if (ipl_block.hdr.pbt == DIAG308_IPL_TYPE_FCP)
+		rc = reipl_append_ascii_scpdata(dest, len, &ipl_block);
+	else
+		dest[0] = 0;
+	return rc;
+}
+
+
 static struct kobj_attribute sys_ipl_vm_parm_attr =
 	__ATTR(parm, S_IRUGO, ipl_vm_parm_show, NULL);
 
@@ -553,7 +606,7 @@ static ssize_t reipl_generic_vmparm_show(struct ipl_parameter_block *ipb,
 {
 	char vmparm[DIAG308_VMPARM_SIZE + 1] = {};
 
-	reipl_get_ascii_vmparm(vmparm, ipb);
+	reipl_get_ascii_vmparm(vmparm, sizeof(vmparm), ipb);
 	return sprintf(page, "%s\n", vmparm);
 }
 
@@ -626,6 +679,59 @@ static struct kobj_attribute sys_reipl_ccw_vmparm_attr =
 
 /* FCP reipl device attributes */
 
+static ssize_t reipl_fcp_scpdata_read(struct kobject *kobj,
+				      struct bin_attribute *attr,
+				      char *buf, loff_t off, size_t count)
+{
+	size_t size = reipl_block_fcp->ipl_info.fcp.scp_data_len;
+	void *scp_data = reipl_block_fcp->ipl_info.fcp.scp_data;
+
+	return memory_read_from_buffer(buf, count, &off, scp_data, size);
+}
+
+static ssize_t reipl_fcp_scpdata_write(struct kobject *kobj,
+				       struct bin_attribute *attr,
+				       char *buf, loff_t off, size_t count)
+{
+	size_t padding;
+	size_t scpdata_len;
+
+	if (off < 0)
+		return -EINVAL;
+
+	if (off >= DIAG308_SCPDATA_SIZE)
+		return -ENOSPC;
+
+	if (count > DIAG308_SCPDATA_SIZE - off)
+		count = DIAG308_SCPDATA_SIZE - off;
+
+	memcpy(reipl_block_fcp->ipl_info.fcp.scp_data, buf + off, count);
+	scpdata_len = off + count;
+
+	if (scpdata_len % 8) {
+		padding = 8 - (scpdata_len % 8);
+		memset(reipl_block_fcp->ipl_info.fcp.scp_data + scpdata_len,
+		       0, padding);
+		scpdata_len += padding;
+	}
+
+	reipl_block_fcp->ipl_info.fcp.scp_data_len = scpdata_len;
+	reipl_block_fcp->hdr.len = IPL_PARM_BLK_FCP_LEN + scpdata_len;
+	reipl_block_fcp->hdr.blk0_len = IPL_PARM_BLK0_FCP_LEN + scpdata_len;
+
+	return count;
+}
+
+static struct bin_attribute sys_reipl_fcp_scp_data_attr = {
+	.attr = {
+		.name = "scp_data",
+		.mode = S_IRUGO | S_IWUSR,
+	},
+	.size = PAGE_SIZE,
+	.read = reipl_fcp_scpdata_read,
+	.write = reipl_fcp_scpdata_write,
+};
+
 DEFINE_IPL_ATTR_RW(reipl_fcp, wwpn, "0x%016llx\n", "%016llx\n",
 		   reipl_block_fcp->ipl_info.fcp.wwpn);
 DEFINE_IPL_ATTR_RW(reipl_fcp, lun, "0x%016llx\n", "%016llx\n",
@@ -647,7 +753,6 @@ static struct attribute *reipl_fcp_attrs[] = {
 };
 
 static struct attribute_group reipl_fcp_attr_group = {
-	.name  = IPL_FCP_STR,
 	.attrs = reipl_fcp_attrs,
 };
 
@@ -895,6 +1000,7 @@ static struct kobj_attribute reipl_type_attr =
 	__ATTR(reipl_type, 0644, reipl_type_show, reipl_type_store);
 
 static struct kset *reipl_kset;
+static struct kset *reipl_fcp_kset;
 
 static void get_ipl_string(char *dst, struct ipl_parameter_block *ipb,
 			   const enum ipl_method m)
@@ -906,7 +1012,7 @@ static void get_ipl_string(char *dst, struct ipl_parameter_block *ipb,
 
 	reipl_get_ascii_loadparm(loadparm, ipb);
 	reipl_get_ascii_nss_name(nss_name, ipb);
-	reipl_get_ascii_vmparm(vmparm, ipb);
+	reipl_get_ascii_vmparm(vmparm, sizeof(vmparm), ipb);
 
 	switch (m) {
 	case REIPL_METHOD_CCW_VM:
@@ -1076,23 +1182,44 @@ static int __init reipl_fcp_init(void)
 	int rc;
 
 	if (!diag308_set_works) {
-		if (ipl_info.type == IPL_TYPE_FCP)
+		if (ipl_info.type == IPL_TYPE_FCP) {
 			make_attrs_ro(reipl_fcp_attrs);
-		else
+			sys_reipl_fcp_scp_data_attr.attr.mode = S_IRUGO;
+		} else
 			return 0;
 	}
 
 	reipl_block_fcp = (void *) get_zeroed_page(GFP_KERNEL);
 	if (!reipl_block_fcp)
 		return -ENOMEM;
-	rc = sysfs_create_group(&reipl_kset->kobj, &reipl_fcp_attr_group);
+
+	/* sysfs: create fcp kset for mixing attr group and bin attrs */
+	reipl_fcp_kset = kset_create_and_add(IPL_FCP_STR, NULL,
+					     &reipl_kset->kobj);
+	if (!reipl_kset) {
+		free_page((unsigned long) reipl_block_fcp);
+		return -ENOMEM;
+	}
+
+	rc = sysfs_create_group(&reipl_fcp_kset->kobj, &reipl_fcp_attr_group);
 	if (rc) {
-		free_page((unsigned long)reipl_block_fcp);
+		kset_unregister(reipl_fcp_kset);
+		free_page((unsigned long) reipl_block_fcp);
 		return rc;
 	}
-	if (ipl_info.type == IPL_TYPE_FCP) {
+
+	rc = sysfs_create_bin_file(&reipl_fcp_kset->kobj,
+				   &sys_reipl_fcp_scp_data_attr);
+	if (rc) {
+		sysfs_remove_group(&reipl_fcp_kset->kobj, &reipl_fcp_attr_group);
+		kset_unregister(reipl_fcp_kset);
+		free_page((unsigned long) reipl_block_fcp);
+		return rc;
+	}
+
+	if (ipl_info.type == IPL_TYPE_FCP)
 		memcpy(reipl_block_fcp, IPL_PARMBLOCK_START, PAGE_SIZE);
-	} else {
+	else {
 		reipl_block_fcp->hdr.len = IPL_PARM_BLK_FCP_LEN;
 		reipl_block_fcp->hdr.version = IPL_PARM_BLOCK_VERSION;
 		reipl_block_fcp->hdr.blk0_len = IPL_PARM_BLK0_FCP_LEN;
-- 
cgit v1.2.3


From 18d00acfe2f3fc5ee62f679eb2e397ae962fe69b Mon Sep 17 00:00:00 2001
From: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Date: Fri, 11 Sep 2009 10:28:41 +0200
Subject: [S390] kernel: Convert upper case scpdata to lower case

If the CP SET LOADDEV on the 3215 console has been used to specify
SCPdata, all data is converted to upper case letters.

When scpdata contains upper case letters only, convert all letters
to lower case.

Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/kernel/ipl.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c
index 04451a5e3c1..ee57a42e6e9 100644
--- a/arch/s390/kernel/ipl.c
+++ b/arch/s390/kernel/ipl.c
@@ -340,19 +340,28 @@ size_t reipl_append_ascii_scpdata(char *dest, size_t size,
 {
 	size_t count;
 	size_t i;
+	int has_lowercase;
 
 	count = min(size - 1, scpdata_length(ipb->ipl_info.fcp.scp_data,
 					     ipb->ipl_info.fcp.scp_data_len));
 	if (!count)
 		goto out;
 
-	for (i = 0; i < count; i++)
+	has_lowercase = 0;
+	for (i = 0; i < count; i++) {
 		if (!isascii(ipb->ipl_info.fcp.scp_data[i])) {
 			count = 0;
 			goto out;
 		}
+		if (!has_lowercase && islower(ipb->ipl_info.fcp.scp_data[i]))
+			has_lowercase = 1;
+	}
 
-	memcpy(dest, ipb->ipl_info.fcp.scp_data, count);
+	if (has_lowercase)
+		memcpy(dest, ipb->ipl_info.fcp.scp_data, count);
+	else
+		for (i = 0; i < count; i++)
+			dest[i] = tolower(ipb->ipl_info.fcp.scp_data[i]);
 out:
 	dest[count] = '\0';
 	return count;
-- 
cgit v1.2.3


From a8c3cb4955d1a051732ead9ecf8bcffc8e7c039d Mon Sep 17 00:00:00 2001
From: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Date: Fri, 11 Sep 2009 10:28:42 +0200
Subject: [S390] move (io|sysc)_restore_trace_psw into .data section

The sysc_restore_trace_psw and io_restore_trace_psw storage locations
are created in the .text section. When creating and IPLing from a named
saved system (NSS), writing to these locations causes a protection exception
(because the .text section is mapped as shared read-only in the NSS).

To permit write access, move the storage locations into the .data section.

The problem occurs only when CONFIG_TRACE_IRQFLAGS is set.
The git commmit that has introduced these variables is:
411788ea7fca01ee803af8225ac35807b4d02050

Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/kernel/entry.S   | 16 ++++++++++++++--
 arch/s390/kernel/entry64.S |  4 ++++
 2 files changed, 18 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S
index c4c80a22bc1..f78580a7403 100644
--- a/arch/s390/kernel/entry.S
+++ b/arch/s390/kernel/entry.S
@@ -278,7 +278,8 @@ sysc_return:
 	bnz	BASED(sysc_work)  # there is work to do (signals etc.)
 sysc_restore:
 #ifdef CONFIG_TRACE_IRQFLAGS
-	la	%r1,BASED(sysc_restore_trace_psw)
+	la	%r1,BASED(sysc_restore_trace_psw_addr)
+	l	%r1,0(%r1)
 	lpsw	0(%r1)
 sysc_restore_trace:
 	TRACE_IRQS_CHECK
@@ -289,10 +290,15 @@ sysc_leave:
 sysc_done:
 
 #ifdef CONFIG_TRACE_IRQFLAGS
+sysc_restore_trace_psw_addr:
+	.long sysc_restore_trace_psw
+
+	.section .data,"aw",@progbits
 	.align	8
 	.globl	sysc_restore_trace_psw
 sysc_restore_trace_psw:
 	.long	0, sysc_restore_trace + 0x80000000
+	.previous
 #endif
 
 #
@@ -606,7 +612,8 @@ io_return:
 	bnz	BASED(io_work)		# there is work to do (signals etc.)
 io_restore:
 #ifdef CONFIG_TRACE_IRQFLAGS
-	la	%r1,BASED(io_restore_trace_psw)
+	la	%r1,BASED(io_restore_trace_psw_addr)
+	l	%r1,0(%r1)
 	lpsw	0(%r1)
 io_restore_trace:
 	TRACE_IRQS_CHECK
@@ -617,10 +624,15 @@ io_leave:
 io_done:
 
 #ifdef CONFIG_TRACE_IRQFLAGS
+io_restore_trace_psw_addr:
+	.long io_restore_trace_psw
+
+	.section .data,"aw",@progbits
 	.align	8
 	.globl	io_restore_trace_psw
 io_restore_trace_psw:
 	.long	0, io_restore_trace + 0x80000000
+	.previous
 #endif
 
 #
diff --git a/arch/s390/kernel/entry64.S b/arch/s390/kernel/entry64.S
index f6618e9e15e..009ca6175db 100644
--- a/arch/s390/kernel/entry64.S
+++ b/arch/s390/kernel/entry64.S
@@ -284,10 +284,12 @@ sysc_leave:
 sysc_done:
 
 #ifdef CONFIG_TRACE_IRQFLAGS
+	.section .data,"aw",@progbits
 	.align	8
 	.globl sysc_restore_trace_psw
 sysc_restore_trace_psw:
 	.quad	0, sysc_restore_trace
+	.previous
 #endif
 
 #
@@ -595,10 +597,12 @@ io_leave:
 io_done:
 
 #ifdef CONFIG_TRACE_IRQFLAGS
+	.section .data,"aw",@progbits
 	.align	8
 	.globl io_restore_trace_psw
 io_restore_trace_psw:
 	.quad	0, io_restore_trace
+	.previous
 #endif
 
 #
-- 
cgit v1.2.3


From 26803144666bd2155a19392fa58a7d512d9c0962 Mon Sep 17 00:00:00 2001
From: Tim Abbott <tabbott@ksplice.com>
Date: Fri, 11 Sep 2009 10:28:43 +0200
Subject: [S390] Use macros for .data.page_aligned.

.data.page_aligned should not need a separate output section, so as
part of this cleanup I moved into the .data output section in the
linker scripts in order to eliminate unnecessary references to the
section name.

Remove the reference to .data.idt, since nothing is put into the
.data.idt section on the s390 architecture.  It looks like Cyrill
Gorcunov posted a patch to remove the .data.idt code on s390
previously:

<http://lkml.indiana.edu/hypermail/linux/kernel/0802.2/2536.html>

CCing him and the people who acked that patch in case there's a reason
it wasn't applied.

Signed-off-by: Tim Abbott <tabbott@ksplice.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Acked-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/kernel/vmlinux.lds.S | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/kernel/vmlinux.lds.S b/arch/s390/kernel/vmlinux.lds.S
index a53db23ee09..8e023c8c246 100644
--- a/arch/s390/kernel/vmlinux.lds.S
+++ b/arch/s390/kernel/vmlinux.lds.S
@@ -60,6 +60,7 @@ SECTIONS
 	} :data
 
 	.data : {		/* Data */
+		PAGE_ALIGNED_DATA(PAGE_SIZE)
 		DATA_DATA
 		CONSTRUCTORS
 	}
@@ -72,11 +73,6 @@ SECTIONS
 	. = ALIGN(PAGE_SIZE);
 	__nosave_end = .;
 
-	. = ALIGN(PAGE_SIZE);
-	.data.page_aligned : {
-		*(.data.idt)
-	}
-
 	. = ALIGN(0x100);
 	.data.cacheline_aligned : {
 		*(.data.cacheline_aligned)
-- 
cgit v1.2.3


From 04a95f6df9d7753098729ef1464e38552627af9d Mon Sep 17 00:00:00 2001
From: Nelson Elhage <nelhage@ksplice.com>
Date: Fri, 11 Sep 2009 10:28:44 +0200
Subject: [S390] clean up linker script using new linker script macros.

Note that this patch moves .data.init_task inside _edata.  In
addition, the alignment of .init.ramfs changes: It is now PAGE_ALIGNED
and __initramfs_end is arbitrarily aligned; Previously it was
only aligned to a 0x100-byte boundary, and always ended on an even
byte.

This change results in fewer output sections and in some data being
reordered, but should have no functional effect.

Signed-off-by: Nelson Elhage <nelhage@ksplice.com>
Signed-off-by: Tim Abbott <tabbott@ksplice.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: linux-s390@vger.kernel.org
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/kernel/vmlinux.lds.S | 83 ++++--------------------------------------
 1 file changed, 7 insertions(+), 76 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/kernel/vmlinux.lds.S b/arch/s390/kernel/vmlinux.lds.S
index 8e023c8c246..7315f9e67e1 100644
--- a/arch/s390/kernel/vmlinux.lds.S
+++ b/arch/s390/kernel/vmlinux.lds.S
@@ -52,51 +52,18 @@ SECTIONS
 	. = ALIGN(PAGE_SIZE);
 	_eshared = .;		/* End of shareable data */
 
-	. = ALIGN(16);		/* Exception table */
-	__ex_table : {
-		__start___ex_table = .;
-		*(__ex_table)
-		__stop___ex_table = .;
-	} :data
-
-	.data : {		/* Data */
-		PAGE_ALIGNED_DATA(PAGE_SIZE)
-		DATA_DATA
-		CONSTRUCTORS
-	}
-
-	. = ALIGN(PAGE_SIZE);
-	.data_nosave : {
-	__nosave_begin = .;
-		*(.data.nosave)
-	}
-	. = ALIGN(PAGE_SIZE);
-	__nosave_end = .;
+	EXCEPTION_TABLE(16) :data
 
-	. = ALIGN(0x100);
-	.data.cacheline_aligned : {
-		*(.data.cacheline_aligned)
-	}
+	RW_DATA_SECTION(0x100, PAGE_SIZE, THREAD_SIZE)
 
-	. = ALIGN(0x100);
-	.data.read_mostly : {
-		*(.data.read_mostly)
-	}
 	_edata = .;		/* End of data section */
 
-	. = ALIGN(THREAD_SIZE);	/* init_task */
-	.data.init_task : {
-		*(.data.init_task)
-	}
-
 	/* will be freed after init */
 	. = ALIGN(PAGE_SIZE);	/* Init code and data */
 	__init_begin = .;
-	.init.text : {
-		_sinittext = .;
-		INIT_TEXT
-		_einittext = .;
-	}
+
+	INIT_TEXT_SECTION(PAGE_SIZE)
+
 	/*
 	 * .exit.text is discarded at runtime, not link time,
 	 * to deal with references from __bug_table
@@ -107,49 +74,13 @@ SECTIONS
 
 	/* early.c uses stsi, which requires page aligned data. */
 	. = ALIGN(PAGE_SIZE);
-	.init.data : {
-		INIT_DATA
-	}
-	. = ALIGN(0x100);
-	.init.setup : {
-		__setup_start = .;
-		*(.init.setup)
-		__setup_end = .;
-	}
-	.initcall.init : {
-		__initcall_start = .;
-		INITCALLS
-		__initcall_end = .;
-	}
-
-	.con_initcall.init : {
-		__con_initcall_start = .;
-		*(.con_initcall.init)
-		__con_initcall_end = .;
-	}
-	SECURITY_INIT
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	. = ALIGN(0x100);
-	.init.ramfs : {
-		__initramfs_start = .;
-		*(.init.ramfs)
-		. = ALIGN(2);
-		__initramfs_end = .;
-	}
-#endif
+	INIT_DATA_SECTION(0x100)
 
 	PERCPU(PAGE_SIZE)
 	. = ALIGN(PAGE_SIZE);
 	__init_end = .;		/* freed after init ends here */
 
-	/* BSS */
-	.bss : {
-		__bss_start = .;
-		*(.bss)
-		. = ALIGN(2);
-		__bss_stop = .;
-	}
+	BSS_SECTION(0, 2, 0)
 
 	_end = . ;
 
-- 
cgit v1.2.3


From d3135e0c40c9a13ad0c57783f2b9569c4c00bd26 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Fri, 11 Sep 2009 10:28:45 +0200
Subject: [S390] kernel: always keep machine flags in lowcore

Eleminate the local variable machine_flags and always change machine
flags directly in the lowcore.
This avoids confusion about when and why the two variables have to be
synchronized.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/kernel/early.c | 28 +++++++++++-----------------
 1 file changed, 11 insertions(+), 17 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/kernel/early.c b/arch/s390/kernel/early.c
index 21f3799fe27..734deeaa736 100644
--- a/arch/s390/kernel/early.c
+++ b/arch/s390/kernel/early.c
@@ -35,8 +35,6 @@
 
 char kernel_nss_name[NSS_NAME_SIZE + 1];
 
-static unsigned long machine_flags;
-
 static void __init setup_boot_command_line(void);
 
 /*
@@ -206,12 +204,9 @@ static noinline __init void detect_machine_type(void)
 
 	/* Running under KVM? If not we assume z/VM */
 	if (!memcmp(vmms.vm[0].cpi, "\xd2\xe5\xd4", 3))
-		machine_flags |= MACHINE_FLAG_KVM;
+		S390_lowcore.machine_flags |= MACHINE_FLAG_KVM;
 	else
-		machine_flags |= MACHINE_FLAG_VM;
-
-	/* Store machine flags for setting up lowcore early */
-	S390_lowcore.machine_flags = machine_flags;
+		S390_lowcore.machine_flags |= MACHINE_FLAG_VM;
 }
 
 static __init void early_pgm_check_handler(void)
@@ -246,7 +241,7 @@ static noinline __init void setup_hpage(void)
 	facilities = stfl();
 	if (!(facilities & (1UL << 23)) || !(facilities & (1UL << 29)))
 		return;
-	machine_flags |= MACHINE_FLAG_HPAGE;
+	S390_lowcore.machine_flags |= MACHINE_FLAG_HPAGE;
 	__ctl_set_bit(0, 23);
 #endif
 }
@@ -264,7 +259,7 @@ static __init void detect_mvpg(void)
 		EX_TABLE(0b,1b)
 		: "=d" (rc) : "0" (-EOPNOTSUPP), "a" (0) : "memory", "cc", "0");
 	if (!rc)
-		machine_flags |= MACHINE_FLAG_MVPG;
+		S390_lowcore.machine_flags |= MACHINE_FLAG_MVPG;
 #endif
 }
 
@@ -280,7 +275,7 @@ static __init void detect_ieee(void)
 		EX_TABLE(0b,1b)
 		: "=d" (rc), "=d" (tmp): "0" (-EOPNOTSUPP) : "cc");
 	if (!rc)
-		machine_flags |= MACHINE_FLAG_IEEE;
+		S390_lowcore.machine_flags |= MACHINE_FLAG_IEEE;
 #endif
 }
 
@@ -299,7 +294,7 @@ static __init void detect_csp(void)
 		EX_TABLE(0b,1b)
 		: "=d" (rc) : "0" (-EOPNOTSUPP) : "cc", "0", "1", "2");
 	if (!rc)
-		machine_flags |= MACHINE_FLAG_CSP;
+		S390_lowcore.machine_flags |= MACHINE_FLAG_CSP;
 #endif
 }
 
@@ -316,7 +311,7 @@ static __init void detect_diag9c(void)
 		EX_TABLE(0b,1b)
 		: "=d" (rc) : "0" (-EOPNOTSUPP), "d" (cpu_address) : "cc");
 	if (!rc)
-		machine_flags |= MACHINE_FLAG_DIAG9C;
+		S390_lowcore.machine_flags |= MACHINE_FLAG_DIAG9C;
 }
 
 static __init void detect_diag44(void)
@@ -331,7 +326,7 @@ static __init void detect_diag44(void)
 		EX_TABLE(0b,1b)
 		: "=d" (rc) : "0" (-EOPNOTSUPP) : "cc");
 	if (!rc)
-		machine_flags |= MACHINE_FLAG_DIAG44;
+		S390_lowcore.machine_flags |= MACHINE_FLAG_DIAG44;
 #endif
 }
 
@@ -342,11 +337,11 @@ static __init void detect_machine_facilities(void)
 
 	facilities = stfl();
 	if (facilities & (1 << 28))
-		machine_flags |= MACHINE_FLAG_IDTE;
+		S390_lowcore.machine_flags |= MACHINE_FLAG_IDTE;
 	if (facilities & (1 << 23))
-		machine_flags |= MACHINE_FLAG_PFMF;
+		S390_lowcore.machine_flags |= MACHINE_FLAG_PFMF;
 	if (facilities & (1 << 4))
-		machine_flags |= MACHINE_FLAG_MVCOS;
+		S390_lowcore.machine_flags |= MACHINE_FLAG_MVCOS;
 #endif
 }
 
@@ -428,7 +423,6 @@ void __init startup_init(void)
 	setup_hpage();
 	sclp_facilities_detect();
 	detect_memory_layout(memory_chunk);
-	S390_lowcore.machine_flags = machine_flags;
 #ifdef CONFIG_DYNAMIC_FTRACE
 	S390_lowcore.ftrace_func = (unsigned long)ftrace_caller;
 #endif
-- 
cgit v1.2.3


From 275c340941991a925969c03ec6b900fd135d09dd Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@lst.de>
Date: Fri, 11 Sep 2009 10:28:46 +0200
Subject: [S390] remove unused irq_cpustat_t defintion

No need to defined a irq_cpustat_t type if __ARCH_IRQ_STAT is defined.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/include/asm/hardirq.h | 7 -------
 1 file changed, 7 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/include/asm/hardirq.h b/arch/s390/include/asm/hardirq.h
index 89ec7056da2..498bc389238 100644
--- a/arch/s390/include/asm/hardirq.h
+++ b/arch/s390/include/asm/hardirq.h
@@ -18,13 +18,6 @@
 #include <linux/interrupt.h>
 #include <asm/lowcore.h>
 
-/* irq_cpustat_t is unused currently, but could be converted
- * into a percpu variable instead of storing softirq_pending
- * on the lowcore */
-typedef struct {
-	unsigned int __softirq_pending;
-} irq_cpustat_t;
-
 #define local_softirq_pending() (S390_lowcore.softirq_pending)
 
 #define __ARCH_IRQ_STAT
-- 
cgit v1.2.3


From 2395ecd98f028b16a6200eb81108a0f67461d16b Mon Sep 17 00:00:00 2001
From: Vitaliy Gusev <vgusev@openvz.org>
Date: Fri, 11 Sep 2009 10:28:48 +0200
Subject: [S390] hypfs: remove useless variable qname

Local variable 'qname' in the function hypfs_create_file() really is not
used for any purpose.

Signed-off-by: Vitaliy Gusev <vgusev@openvz.org>
Cc: Michael Holzheu <holzheu@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/hypfs/inode.c | 4 ----
 1 file changed, 4 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/hypfs/inode.c b/arch/s390/hypfs/inode.c
index 5a805df216b..e760b5b0141 100644
--- a/arch/s390/hypfs/inode.c
+++ b/arch/s390/hypfs/inode.c
@@ -355,11 +355,7 @@ static struct dentry *hypfs_create_file(struct super_block *sb,
 {
 	struct dentry *dentry;
 	struct inode *inode;
-	struct qstr qname;
 
-	qname.name = name;
-	qname.len = strlen(name);
-	qname.hash = full_name_hash(name, qname.len);
 	mutex_lock(&parent->d_inode->i_mutex);
 	dentry = lookup_one_len(name, parent, strlen(name));
 	if (IS_ERR(dentry)) {
-- 
cgit v1.2.3


From 11af97e18ea8c310d73b59f1361e6f04444e05a8 Mon Sep 17 00:00:00 2001
From: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Date: Fri, 11 Sep 2009 10:28:53 +0200
Subject: [S390] kernel: Print an error message if kernel NSS cannot be defined

If a named saved system (NSS) cannot be defined or saved, print out an
error message with the return code of the underlying z/VM CP command.

Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/kernel/early.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/s390/kernel/early.c b/arch/s390/kernel/early.c
index 734deeaa736..bf8b4ae7ff2 100644
--- a/arch/s390/kernel/early.c
+++ b/arch/s390/kernel/early.c
@@ -6,6 +6,9 @@
  *		 Heiko Carstens <heiko.carstens@de.ibm.com>
  */
 
+#define KMSG_COMPONENT "setup"
+#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
+
 #include <linux/compiler.h>
 #include <linux/init.h>
 #include <linux/errno.h>
@@ -16,6 +19,7 @@
 #include <linux/module.h>
 #include <linux/pfn.h>
 #include <linux/uaccess.h>
+#include <linux/kernel.h>
 #include <asm/ebcdic.h>
 #include <asm/ipl.h>
 #include <asm/lowcore.h>
@@ -140,6 +144,8 @@ static noinline __init void create_kernel_nss(void)
 	__cpcmd(defsys_cmd, NULL, 0, &response);
 
 	if (response != 0) {
+		pr_err("Defining the Linux kernel NSS failed with rc=%d\n",
+			response);
 		kernel_nss_name[0] = '\0';
 		return;
 	}
@@ -152,8 +158,11 @@ static noinline __init void create_kernel_nss(void)
 	 *	       max SAVESYS_CMD_SIZE
 	 * On error: response contains the numeric portion of cp error message.
 	 *	     for SAVESYS it will be >= 263
+	 *	     for missing privilege class, it will be 1
 	 */
-	if (response > SAVESYS_CMD_SIZE) {
+	if (response > SAVESYS_CMD_SIZE || response == 1) {
+		pr_err("Saving the Linux kernel NSS failed with rc=%d\n",
+			response);
 		kernel_nss_name[0] = '\0';
 		return;
 	}
-- 
cgit v1.2.3


From ad2a5d8e0b518f997af126dd737127bdada90a6f Mon Sep 17 00:00:00 2001
From: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Date: Fri, 11 Sep 2009 10:28:54 +0200
Subject: [S390] hypfs: Use "%u" instead of "%d" for unsigned ints in snprintf

For printing unsigned integers hypfs uses "%d" in snprintf(). This is wrong.
With this patch "%u" is used instead.

Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/hypfs/inode.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/s390/hypfs/inode.c b/arch/s390/hypfs/inode.c
index e760b5b0141..bd9914b8948 100644
--- a/arch/s390/hypfs/inode.c
+++ b/arch/s390/hypfs/inode.c
@@ -422,7 +422,7 @@ struct dentry *hypfs_create_u64(struct super_block *sb, struct dentry *dir,
 	char tmp[TMP_SIZE];
 	struct dentry *dentry;
 
-	snprintf(tmp, TMP_SIZE, "%lld\n", (unsigned long long int)value);
+	snprintf(tmp, TMP_SIZE, "%llu\n", (unsigned long long int)value);
 	buffer = kstrdup(tmp, GFP_KERNEL);
 	if (!buffer)
 		return ERR_PTR(-ENOMEM);
-- 
cgit v1.2.3


From c4de0c1a18237c2727dde8ad392e333539b0af3c Mon Sep 17 00:00:00 2001
From: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Date: Fri, 11 Sep 2009 10:28:56 +0200
Subject: [S390] kvm: use console_initcall() to initialize s390 virtio console

Use a console_initcall() to initialize the s390 virtio console and
clean up s390 console initialization in setup.c.

Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/include/asm/kvm_virtio.h | 10 ----------
 arch/s390/kernel/setup.c           | 10 +++-------
 2 files changed, 3 insertions(+), 17 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/include/asm/kvm_virtio.h b/arch/s390/include/asm/kvm_virtio.h
index 0503936f101..acdfdff2661 100644
--- a/arch/s390/include/asm/kvm_virtio.h
+++ b/arch/s390/include/asm/kvm_virtio.h
@@ -54,14 +54,4 @@ struct kvm_vqconfig {
  * This is pagesize for historical reasons. */
 #define KVM_S390_VIRTIO_RING_ALIGN	4096
 
-#ifdef __KERNEL__
-/* early virtio console setup */
-#ifdef CONFIG_S390_GUEST
-extern void s390_virtio_console_init(void);
-#else
-static inline void s390_virtio_console_init(void)
-{
-}
-#endif /* CONFIG_VIRTIO_CONSOLE */
-#endif /* __KERNEL__ */
 #endif
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index cbb897bc50b..9ed13a1ed37 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -156,15 +156,11 @@ __setup("condev=", condev_setup);
 
 static void __init set_preferred_console(void)
 {
-	if (MACHINE_IS_KVM) {
+	if (MACHINE_IS_KVM)
 		add_preferred_console("hvc", 0, NULL);
-		s390_virtio_console_init();
-		return;
-	}
-
-	if (CONSOLE_IS_3215 || CONSOLE_IS_SCLP)
+	else if (CONSOLE_IS_3215 || CONSOLE_IS_SCLP)
 		add_preferred_console("ttyS", 0, NULL);
-	if (CONSOLE_IS_3270)
+	else if (CONSOLE_IS_3270)
 		add_preferred_console("tty3270", 0, NULL);
 }
 
-- 
cgit v1.2.3


From 50aa98bad056a17655864a4d71ebc32d95c629a7 Mon Sep 17 00:00:00 2001
From: Martin Schwidefsky <schwidefsky@de.ibm.com>
Date: Fri, 11 Sep 2009 10:28:57 +0200
Subject: [S390] fix recursive locking on page_table_lock

Suzuki Poulose reported the following recursive locking bug on s390:

Here is the stack trace : (see Appendix I for more info)

  [<0000000000406ed6>] _spin_lock+0x52/0x94
  [<0000000000103bde>] crst_table_free+0x14e/0x1a4
  [<00000000001ba684>] __pmd_alloc+0x114/0x1ec
  [<00000000001be8d0>] handle_mm_fault+0x2cc/0xb80
  [<0000000000407d62>] do_dat_exception+0x2b6/0x3a0
  [<0000000000114f8c>] sysc_return+0x0/0x8
  [<00000200001642b2>] 0x200001642b2

The page_table_lock is already acquired in __pmd_alloc (mm/memory.c) and
it tries to populate the pud/pgd with a new pmd allocated. If another
thread populates it before we get a chance, we free the pmd using
pmd_free().

On s390x, pmd_free(even pud_free ) is #defined to crst_table_free(),
which acquires the page_table_lock to protect the crst_table index updates.

Hence this ends up in a recursive locking of the page_table_lock.

The solution suggested by Dave Hansen is to use a new spin lock in the mmu
context to protect the access to the crst_list and the pgtable_list.

Reported-by: Suzuki Poulose <suzuki@in.ibm.com>
Cc: Dave Hansen <dave@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/include/asm/mmu.h     |  1 +
 arch/s390/include/asm/pgalloc.h |  1 +
 arch/s390/mm/pgtable.c          | 24 ++++++++++++------------
 arch/s390/mm/vmem.c             |  1 +
 4 files changed, 15 insertions(+), 12 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/include/asm/mmu.h b/arch/s390/include/asm/mmu.h
index 3b59216e628..03be99919d6 100644
--- a/arch/s390/include/asm/mmu.h
+++ b/arch/s390/include/asm/mmu.h
@@ -2,6 +2,7 @@
 #define __MMU_H
 
 typedef struct {
+	spinlock_t list_lock;
 	struct list_head crst_list;
 	struct list_head pgtable_list;
 	unsigned long asce_bits;
diff --git a/arch/s390/include/asm/pgalloc.h b/arch/s390/include/asm/pgalloc.h
index b2658b9220f..ddad5903341 100644
--- a/arch/s390/include/asm/pgalloc.h
+++ b/arch/s390/include/asm/pgalloc.h
@@ -140,6 +140,7 @@ static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd)
 
 static inline pgd_t *pgd_alloc(struct mm_struct *mm)
 {
+	spin_lock_init(&mm->context.list_lock);
 	INIT_LIST_HEAD(&mm->context.crst_list);
 	INIT_LIST_HEAD(&mm->context.pgtable_list);
 	return (pgd_t *) crst_table_alloc(mm, s390_noexec);
diff --git a/arch/s390/mm/pgtable.c b/arch/s390/mm/pgtable.c
index 56566720798..c7021524707 100644
--- a/arch/s390/mm/pgtable.c
+++ b/arch/s390/mm/pgtable.c
@@ -78,9 +78,9 @@ unsigned long *crst_table_alloc(struct mm_struct *mm, int noexec)
 		}
 		page->index = page_to_phys(shadow);
 	}
-	spin_lock(&mm->page_table_lock);
+	spin_lock(&mm->context.list_lock);
 	list_add(&page->lru, &mm->context.crst_list);
-	spin_unlock(&mm->page_table_lock);
+	spin_unlock(&mm->context.list_lock);
 	return (unsigned long *) page_to_phys(page);
 }
 
@@ -89,9 +89,9 @@ void crst_table_free(struct mm_struct *mm, unsigned long *table)
 	unsigned long *shadow = get_shadow_table(table);
 	struct page *page = virt_to_page(table);
 
-	spin_lock(&mm->page_table_lock);
+	spin_lock(&mm->context.list_lock);
 	list_del(&page->lru);
-	spin_unlock(&mm->page_table_lock);
+	spin_unlock(&mm->context.list_lock);
 	if (shadow)
 		free_pages((unsigned long) shadow, ALLOC_ORDER);
 	free_pages((unsigned long) table, ALLOC_ORDER);
@@ -182,7 +182,7 @@ unsigned long *page_table_alloc(struct mm_struct *mm)
 	unsigned long bits;
 
 	bits = (mm->context.noexec || mm->context.has_pgste) ? 3UL : 1UL;
-	spin_lock(&mm->page_table_lock);
+	spin_lock(&mm->context.list_lock);
 	page = NULL;
 	if (!list_empty(&mm->context.pgtable_list)) {
 		page = list_first_entry(&mm->context.pgtable_list,
@@ -191,7 +191,7 @@ unsigned long *page_table_alloc(struct mm_struct *mm)
 			page = NULL;
 	}
 	if (!page) {
-		spin_unlock(&mm->page_table_lock);
+		spin_unlock(&mm->context.list_lock);
 		page = alloc_page(GFP_KERNEL|__GFP_REPEAT);
 		if (!page)
 			return NULL;
@@ -202,7 +202,7 @@ unsigned long *page_table_alloc(struct mm_struct *mm)
 			clear_table_pgstes(table);
 		else
 			clear_table(table, _PAGE_TYPE_EMPTY, PAGE_SIZE);
-		spin_lock(&mm->page_table_lock);
+		spin_lock(&mm->context.list_lock);
 		list_add(&page->lru, &mm->context.pgtable_list);
 	}
 	table = (unsigned long *) page_to_phys(page);
@@ -213,7 +213,7 @@ unsigned long *page_table_alloc(struct mm_struct *mm)
 	page->flags |= bits;
 	if ((page->flags & FRAG_MASK) == ((1UL << TABLES_PER_PAGE) - 1))
 		list_move_tail(&page->lru, &mm->context.pgtable_list);
-	spin_unlock(&mm->page_table_lock);
+	spin_unlock(&mm->context.list_lock);
 	return table;
 }
 
@@ -225,7 +225,7 @@ void page_table_free(struct mm_struct *mm, unsigned long *table)
 	bits = (mm->context.noexec || mm->context.has_pgste) ? 3UL : 1UL;
 	bits <<= (__pa(table) & (PAGE_SIZE - 1)) / 256 / sizeof(unsigned long);
 	page = pfn_to_page(__pa(table) >> PAGE_SHIFT);
-	spin_lock(&mm->page_table_lock);
+	spin_lock(&mm->context.list_lock);
 	page->flags ^= bits;
 	if (page->flags & FRAG_MASK) {
 		/* Page now has some free pgtable fragments. */
@@ -234,7 +234,7 @@ void page_table_free(struct mm_struct *mm, unsigned long *table)
 	} else
 		/* All fragments of the 4K page have been freed. */
 		list_del(&page->lru);
-	spin_unlock(&mm->page_table_lock);
+	spin_unlock(&mm->context.list_lock);
 	if (page) {
 		pgtable_page_dtor(page);
 		__free_page(page);
@@ -245,7 +245,7 @@ void disable_noexec(struct mm_struct *mm, struct task_struct *tsk)
 {
 	struct page *page;
 
-	spin_lock(&mm->page_table_lock);
+	spin_lock(&mm->context.list_lock);
 	/* Free shadow region and segment tables. */
 	list_for_each_entry(page, &mm->context.crst_list, lru)
 		if (page->index) {
@@ -255,7 +255,7 @@ void disable_noexec(struct mm_struct *mm, struct task_struct *tsk)
 	/* "Free" second halves of page tables. */
 	list_for_each_entry(page, &mm->context.pgtable_list, lru)
 		page->flags &= ~SECOND_HALVES;
-	spin_unlock(&mm->page_table_lock);
+	spin_unlock(&mm->context.list_lock);
 	mm->context.noexec = 0;
 	update_mm(mm, tsk);
 }
diff --git a/arch/s390/mm/vmem.c b/arch/s390/mm/vmem.c
index e4868bfc672..5f91a38d759 100644
--- a/arch/s390/mm/vmem.c
+++ b/arch/s390/mm/vmem.c
@@ -331,6 +331,7 @@ void __init vmem_map_init(void)
 	unsigned long start, end;
 	int i;
 
+	spin_lock_init(&init_mm.context.list_lock);
 	INIT_LIST_HEAD(&init_mm.context.crst_list);
 	INIT_LIST_HEAD(&init_mm.context.pgtable_list);
 	init_mm.context.noexec = 0;
-- 
cgit v1.2.3


From 0c88ee5b7523e76e290d558c28cd0be48ffad597 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Fri, 11 Sep 2009 10:28:58 +0200
Subject: [S390] Initialize __LC_THREAD_INFO early.

"lockdep: Fix backtraces" reveales a bug in early setup code: when
lockdep tries to save a stack backtrace before setup_arch has been
called the lowcore pointer for the current thread info pointer isn't
initialized yet.
However our save stack backtrace code relies on it. If the pointer
isn't initialized the saved backtrace will have zero entries.
lockdep however relies (correctly) on the fact that that cannot
happen.
A write access to some random memory region is the result.

Fix this by initializing the thread info pointer early.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/kernel/head31.S | 1 +
 arch/s390/kernel/head64.S | 1 +
 2 files changed, 2 insertions(+)

(limited to 'arch')

diff --git a/arch/s390/kernel/head31.S b/arch/s390/kernel/head31.S
index 2ced846065b..602b508cd4c 100644
--- a/arch/s390/kernel/head31.S
+++ b/arch/s390/kernel/head31.S
@@ -24,6 +24,7 @@ startup_continue:
 # Setup stack
 #
 	l	%r15,.Linittu-.LPG1(%r13)
+	st	%r15,__LC_THREAD_INFO	# cache thread info in lowcore
 	mvc	__LC_CURRENT(4),__TI_task(%r15)
 	ahi	%r15,1<<(PAGE_SHIFT+THREAD_ORDER) # init_task_union+THREAD_SIZE
 	st	%r15,__LC_KERNEL_STACK	# set end of kernel stack
diff --git a/arch/s390/kernel/head64.S b/arch/s390/kernel/head64.S
index 65667b2e65c..bdcb3f05bcd 100644
--- a/arch/s390/kernel/head64.S
+++ b/arch/s390/kernel/head64.S
@@ -92,6 +92,7 @@ startup_continue:
 # Setup stack
 #
 	larl	%r15,init_thread_union
+	stg	%r15,__LC_THREAD_INFO	# cache thread info in lowcore
 	lg	%r14,__TI_task(%r15)	# cache current in lowcore
 	stg	%r14,__LC_CURRENT
 	aghi	%r15,1<<(PAGE_SHIFT+THREAD_ORDER) # init_task_union + THREAD_SIZE
-- 
cgit v1.2.3


From f64d04c042193183c6dad98944ae2861b998e8b7 Mon Sep 17 00:00:00 2001
From: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Date: Fri, 11 Sep 2009 10:28:59 +0200
Subject: [S390] s390dbf: Add description for usage of "%s" in sprintf events

Using "%s" in sprintf event functions is dangerous. This patch adds a short
description for this issue to the s390 debug feature documentation.

Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/include/asm/debug.h | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/s390/include/asm/debug.h b/arch/s390/include/asm/debug.h
index 31ed5686a96..18124b75a7a 100644
--- a/arch/s390/include/asm/debug.h
+++ b/arch/s390/include/asm/debug.h
@@ -167,6 +167,10 @@ debug_text_event(debug_info_t* id, int level, const char* txt)
         return debug_event_common(id,level,txt,strlen(txt));
 }
 
+/*
+ * IMPORTANT: Use "%s" in sprintf format strings with care! Only pointers are
+ * stored in the s390dbf. See Documentation/s390/s390dbf.txt for more details!
+ */
 extern debug_entry_t *
 debug_sprintf_event(debug_info_t* id,int level,char *string,...)
 	__attribute__ ((format(printf, 3, 4)));
@@ -206,7 +210,10 @@ debug_text_exception(debug_info_t* id, int level, const char* txt)
         return debug_exception_common(id,level,txt,strlen(txt));
 }
 
-
+/*
+ * IMPORTANT: Use "%s" in sprintf format strings with care! Only pointers are
+ * stored in the s390dbf. See Documentation/s390/s390dbf.txt for more details!
+ */
 extern debug_entry_t *
 debug_sprintf_exception(debug_info_t* id,int level,char *string,...)
 	__attribute__ ((format(printf, 3, 4)));
-- 
cgit v1.2.3


From 5dd1d2ece0250125fec2dcccbfb8ab9bb2ac020c Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Fri, 11 Sep 2009 10:29:00 +0200
Subject: [S390] use generic scatterlist.h

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/include/asm/scatterlist.h | 20 +-------------------
 1 file changed, 1 insertion(+), 19 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/include/asm/scatterlist.h b/arch/s390/include/asm/scatterlist.h
index 29ec8e28c8d..35d786fe93a 100644
--- a/arch/s390/include/asm/scatterlist.h
+++ b/arch/s390/include/asm/scatterlist.h
@@ -1,19 +1 @@
-#ifndef _ASMS390_SCATTERLIST_H
-#define _ASMS390_SCATTERLIST_H
-
-struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
-    unsigned long sg_magic;
-#endif
-    unsigned long page_link;
-    unsigned int offset;
-    unsigned int length;
-};
-
-#ifdef __s390x__
-#define ISA_DMA_THRESHOLD (0xffffffffffffffffUL)
-#else
-#define ISA_DMA_THRESHOLD (0xffffffffUL)
-#endif
-
-#endif /* _ASMS390X_SCATTERLIST_H */
+#include <asm-generic/scatterlist.h>
-- 
cgit v1.2.3


From 2ddddf3e0a55a7fcd6f240a7416cfcb12dd38b7e Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Fri, 11 Sep 2009 10:29:01 +0200
Subject: [S390] Enable guest page hinting by default.

Get rid of the PAGE_STATES config option and enable guest page hinting
by default.
It can be disabled by specifying "cmma=off" at the command line.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/Kconfig              | 7 -------
 arch/s390/include/asm/page.h   | 4 ----
 arch/s390/include/asm/system.h | 4 ----
 arch/s390/mm/Makefile          | 4 ++--
 arch/s390/mm/page-states.c     | 6 ++----
 5 files changed, 4 insertions(+), 21 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 47836b945d0..e030e86ff6a 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -480,13 +480,6 @@ config CMM_IUCV
 	  Select this option to enable the special message interface to
 	  the cooperative memory management.
 
-config PAGE_STATES
-	bool "Unused page notification"
-	help
-	  This enables the notification of unused pages to the
-	  hypervisor. The ESSA instruction is used to do the states
-	  changes between a page that has content and the unused state.
-
 config APPLDATA_BASE
 	bool "Linux - VM Monitor Stream, base infrastructure"
 	depends on PROC_FS
diff --git a/arch/s390/include/asm/page.h b/arch/s390/include/asm/page.h
index 3e3594d01f8..5e9daf5d7f2 100644
--- a/arch/s390/include/asm/page.h
+++ b/arch/s390/include/asm/page.h
@@ -125,8 +125,6 @@ page_get_storage_key(unsigned long addr)
 	return skey;
 }
 
-#ifdef CONFIG_PAGE_STATES
-
 struct page;
 void arch_free_page(struct page *page, int order);
 void arch_alloc_page(struct page *page, int order);
@@ -134,8 +132,6 @@ void arch_alloc_page(struct page *page, int order);
 #define HAVE_ARCH_FREE_PAGE
 #define HAVE_ARCH_ALLOC_PAGE
 
-#endif
-
 #endif /* !__ASSEMBLY__ */
 
 #define __PAGE_OFFSET           0x0UL
diff --git a/arch/s390/include/asm/system.h b/arch/s390/include/asm/system.h
index 4fb83c1cdb7..379661d2f81 100644
--- a/arch/s390/include/asm/system.h
+++ b/arch/s390/include/asm/system.h
@@ -109,11 +109,7 @@ extern void pfault_fini(void);
 #define pfault_fini()		do { } while (0)
 #endif /* CONFIG_PFAULT */
 
-#ifdef CONFIG_PAGE_STATES
 extern void cmma_init(void);
-#else
-static inline void cmma_init(void) { }
-#endif
 
 #define finish_arch_switch(prev) do {					     \
 	set_fs(current->thread.mm_segment);				     \
diff --git a/arch/s390/mm/Makefile b/arch/s390/mm/Makefile
index db05661ac89..eec05448441 100644
--- a/arch/s390/mm/Makefile
+++ b/arch/s390/mm/Makefile
@@ -2,7 +2,7 @@
 # Makefile for the linux s390-specific parts of the memory manager.
 #
 
-obj-y	 := init.o fault.o extmem.o mmap.o vmem.o pgtable.o maccess.o
+obj-y	 := init.o fault.o extmem.o mmap.o vmem.o pgtable.o maccess.o \
+	    page-states.o
 obj-$(CONFIG_CMM) += cmm.o
 obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
-obj-$(CONFIG_PAGE_STATES) += page-states.o
diff --git a/arch/s390/mm/page-states.c b/arch/s390/mm/page-states.c
index fc0ad73ffd9..f92ec203ad9 100644
--- a/arch/s390/mm/page-states.c
+++ b/arch/s390/mm/page-states.c
@@ -1,6 +1,4 @@
 /*
- * arch/s390/mm/page-states.c
- *
  * Copyright IBM Corp. 2008
  *
  * Guest page hinting for unused pages.
@@ -17,11 +15,12 @@
 #define ESSA_SET_STABLE		1
 #define ESSA_SET_UNUSED		2
 
-static int cmma_flag;
+static int cmma_flag = 1;
 
 static int __init cmma(char *str)
 {
 	char *parm;
+
 	parm = strstrip(str);
 	if (strcmp(parm, "yes") == 0 || strcmp(parm, "on") == 0) {
 		cmma_flag = 1;
@@ -32,7 +31,6 @@ static int __init cmma(char *str)
 		return 1;
 	return 0;
 }
-
 __setup("cmma=", cmma);
 
 void __init cmma_init(void)
-- 
cgit v1.2.3


From 4bb5e07b68565d7983108993aa23eccf5f1b35fe Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Fri, 11 Sep 2009 10:29:03 +0200
Subject: [S390] Limit cpu detection to 256 physical cpus.

Saves us more than 65k pointless IPIs.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/include/asm/cpu.h | 6 ++++++
 arch/s390/kernel/head.S     | 1 +
 arch/s390/kernel/head64.S   | 8 +++-----
 arch/s390/kernel/smp.c      | 5 +++--
 4 files changed, 13 insertions(+), 7 deletions(-)
 create mode 100644 arch/s390/include/asm/cpu.h

(limited to 'arch')

diff --git a/arch/s390/include/asm/cpu.h b/arch/s390/include/asm/cpu.h
new file mode 100644
index 00000000000..702ad46841c
--- /dev/null
+++ b/arch/s390/include/asm/cpu.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_S390_CPU_H
+#define _ASM_S390_CPU_H
+
+#define MAX_CPU_ADDRESS 255
+
+#endif /* _ASM_S390_CPU_H */
diff --git a/arch/s390/kernel/head.S b/arch/s390/kernel/head.S
index ec688234852..c52b4f7742f 100644
--- a/arch/s390/kernel/head.S
+++ b/arch/s390/kernel/head.S
@@ -27,6 +27,7 @@
 #include <asm/asm-offsets.h>
 #include <asm/thread_info.h>
 #include <asm/page.h>
+#include <asm/cpu.h>
 
 #ifdef CONFIG_64BIT
 #define ARCH_OFFSET	4
diff --git a/arch/s390/kernel/head64.S b/arch/s390/kernel/head64.S
index bdcb3f05bcd..6a250808092 100644
--- a/arch/s390/kernel/head64.S
+++ b/arch/s390/kernel/head64.S
@@ -62,9 +62,9 @@ startup_continue:
 	clr	%r11,%r12
 	je	5f			# no more space in prefix array
 4:
-	ahi	%r8,1				# next cpu (r8 += 1)
-	cl	%r8,.Llast_cpu-.LPG1(%r13)	# is last possible cpu ?
-	jl	1b				# jump if not last cpu
+	ahi	%r8,1			# next cpu (r8 += 1)
+	chi	%r8,MAX_CPU_ADDRESS	# is last possible cpu ?
+	jle	1b			# jump if not last cpu
 5:
 	lhi	%r1,2			# mode 2 = esame (dump)
 	j	6f
@@ -130,8 +130,6 @@ startup_continue:
 #ifdef CONFIG_ZFCPDUMP
 .Lcurrent_cpu:
 	.long 0x0
-.Llast_cpu:
-	.long 0x0000ffff
 .Lpref_arr_ptr:
 	.long zfcpdump_prefix_array
 #endif /* CONFIG_ZFCPDUMP */
diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index be2cae08340..9261495ca2c 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -49,6 +49,7 @@
 #include <asm/sclp.h>
 #include <asm/cputime.h>
 #include <asm/vdso.h>
+#include <asm/cpu.h>
 #include "entry.h"
 
 static struct task_struct *current_set[NR_CPUS];
@@ -300,7 +301,7 @@ static int smp_rescan_cpus_sigp(cpumask_t avail)
 	logical_cpu = cpumask_first(&avail);
 	if (logical_cpu >= nr_cpu_ids)
 		return 0;
-	for (cpu_id = 0; cpu_id <= 65535; cpu_id++) {
+	for (cpu_id = 0; cpu_id <= MAX_CPU_ADDRESS; cpu_id++) {
 		if (cpu_known(cpu_id))
 			continue;
 		__cpu_logical_map[logical_cpu] = cpu_id;
@@ -379,7 +380,7 @@ static void __init smp_detect_cpus(void)
 	/* Use sigp detection algorithm if sclp doesn't work. */
 	if (sclp_get_cpu_info(info)) {
 		smp_use_sigp_detection = 1;
-		for (cpu = 0; cpu <= 65535; cpu++) {
+		for (cpu = 0; cpu <= MAX_CPU_ADDRESS; cpu++) {
 			if (cpu == boot_cpu_addr)
 				continue;
 			__cpu_logical_map[CPU_INIT_NO] = cpu;
-- 
cgit v1.2.3


From e86a6ed63f46fe8fb555fda531084bca3ef62fd7 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Fri, 11 Sep 2009 10:29:04 +0200
Subject: [S390] Get rid of cpuid.h header file.

Merge cpuid.h header file into cpu.h.
While at it convert from typedef to struct declaration and also
convert cio code to use proper lowcore structure instead of casts.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/include/asm/cpu.h       | 20 ++++++++++++++++++++
 arch/s390/include/asm/cpuid.h     | 25 -------------------------
 arch/s390/include/asm/kvm_host.h  |  6 +++---
 arch/s390/include/asm/lowcore.h   |  6 +++---
 arch/s390/include/asm/processor.h |  4 ++--
 5 files changed, 28 insertions(+), 33 deletions(-)
 delete mode 100644 arch/s390/include/asm/cpuid.h

(limited to 'arch')

diff --git a/arch/s390/include/asm/cpu.h b/arch/s390/include/asm/cpu.h
index 702ad46841c..471234b9057 100644
--- a/arch/s390/include/asm/cpu.h
+++ b/arch/s390/include/asm/cpu.h
@@ -1,6 +1,26 @@
+/*
+ *    Copyright IBM Corp. 2000,2009
+ *    Author(s): Hartmut Penner <hp@de.ibm.com>,
+ *		 Martin Schwidefsky <schwidefsky@de.ibm.com>,
+ *		 Christian Ehrhardt <ehrhardt@de.ibm.com>,
+ */
+
 #ifndef _ASM_S390_CPU_H
 #define _ASM_S390_CPU_H
 
 #define MAX_CPU_ADDRESS 255
 
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+
+struct cpuid
+{
+	unsigned int version :	8;
+	unsigned int ident   : 24;
+	unsigned int machine : 16;
+	unsigned int unused  : 16;
+} __packed;
+
+#endif /* __ASSEMBLY__ */
 #endif /* _ASM_S390_CPU_H */
diff --git a/arch/s390/include/asm/cpuid.h b/arch/s390/include/asm/cpuid.h
deleted file mode 100644
index 07836a2e522..00000000000
--- a/arch/s390/include/asm/cpuid.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- *    Copyright IBM Corp. 2000,2009
- *    Author(s): Hartmut Penner <hp@de.ibm.com>,
- *		 Martin Schwidefsky <schwidefsky@de.ibm.com>
- *		 Christian Ehrhardt <ehrhardt@de.ibm.com>
- */
-
-#ifndef _ASM_S390_CPUID_H_
-#define _ASM_S390_CPUID_H_
-
-/*
- *  CPU type and hardware bug flags. Kept separately for each CPU.
- *  Members of this structure are referenced in head.S, so think twice
- *  before touching them. [mj]
- */
-
-typedef struct
-{
-	unsigned int version :	8;
-	unsigned int ident   : 24;
-	unsigned int machine : 16;
-	unsigned int unused  : 16;
-} __attribute__ ((packed)) cpuid_t;
-
-#endif /* _ASM_S390_CPUID_H_ */
diff --git a/arch/s390/include/asm/kvm_host.h b/arch/s390/include/asm/kvm_host.h
index 1cd02f6073a..698988f6940 100644
--- a/arch/s390/include/asm/kvm_host.h
+++ b/arch/s390/include/asm/kvm_host.h
@@ -17,7 +17,7 @@
 #include <linux/interrupt.h>
 #include <linux/kvm_host.h>
 #include <asm/debug.h>
-#include <asm/cpuid.h>
+#include <asm/cpu.h>
 
 #define KVM_MAX_VCPUS 64
 #define KVM_MEMORY_SLOTS 32
@@ -217,8 +217,8 @@ struct kvm_vcpu_arch {
 	struct hrtimer    ckc_timer;
 	struct tasklet_struct tasklet;
 	union  {
-		cpuid_t	  cpu_id;
-		u64	  stidp_data;
+		struct cpuid	cpu_id;
+		u64		stidp_data;
 	};
 };
 
diff --git a/arch/s390/include/asm/lowcore.h b/arch/s390/include/asm/lowcore.h
index 5046ad6b7a6..6bc9426a6fb 100644
--- a/arch/s390/include/asm/lowcore.h
+++ b/arch/s390/include/asm/lowcore.h
@@ -132,7 +132,7 @@
 
 #ifndef __ASSEMBLY__
 
-#include <asm/cpuid.h>
+#include <asm/cpu.h>
 #include <asm/ptrace.h>
 #include <linux/types.h>
 
@@ -275,7 +275,7 @@ struct _lowcore
 	__u32	user_exec_asce;			/* 0x02ac */
 
 	/* SMP info area */
-	cpuid_t	cpu_id;				/* 0x02b0 */
+	struct cpuid cpu_id;			/* 0x02b0 */
 	__u32	cpu_nr;				/* 0x02b8 */
 	__u32	softirq_pending;		/* 0x02bc */
 	__u32	percpu_offset;			/* 0x02c0 */
@@ -380,7 +380,7 @@ struct _lowcore
 	__u64	user_exec_asce;			/* 0x0318 */
 
 	/* SMP info area */
-	cpuid_t	cpu_id;				/* 0x0320 */
+	struct cpuid cpu_id;			/* 0x0320 */
 	__u32	cpu_nr;				/* 0x0328 */
 	__u32	softirq_pending;		/* 0x032c */
 	__u64	percpu_offset;			/* 0x0330 */
diff --git a/arch/s390/include/asm/processor.h b/arch/s390/include/asm/processor.h
index c139fa7b8e8..cf8eed3fa77 100644
--- a/arch/s390/include/asm/processor.h
+++ b/arch/s390/include/asm/processor.h
@@ -14,7 +14,7 @@
 #define __ASM_S390_PROCESSOR_H
 
 #include <linux/linkage.h>
-#include <asm/cpuid.h>
+#include <asm/cpu.h>
 #include <asm/page.h>
 #include <asm/ptrace.h>
 #include <asm/setup.h>
@@ -26,7 +26,7 @@
  */
 #define current_text_addr() ({ void *pc; asm("basr %0,0" : "=a" (pc)); pc; })
 
-static inline void get_cpu_id(cpuid_t *ptr)
+static inline void get_cpu_id(struct cpuid *ptr)
 {
 	asm volatile("stidp 0(%1)" : "=m" (*ptr) : "a" (ptr));
 }
-- 
cgit v1.2.3


From 5c0b912e755caaad555eb6feefdb1124462d8f37 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Fri, 11 Sep 2009 10:29:05 +0200
Subject: [S390] Remove smp_cpu_not_running.

smp_cpu_not_running() and cpu_stopped() are doing the same.
Remove one and also get rid of the last hard_smp_processor_id() leftover.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/include/asm/smp.h | 32 +-------------------------------
 arch/s390/kernel/smp.c      | 34 +++++++++++++++++++---------------
 2 files changed, 20 insertions(+), 46 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/include/asm/smp.h b/arch/s390/include/asm/smp.h
index 72137bc907a..c991fe6473c 100644
--- a/arch/s390/include/asm/smp.h
+++ b/arch/s390/include/asm/smp.h
@@ -51,32 +51,7 @@ extern void machine_power_off_smp(void);
 #define PROC_CHANGE_PENALTY	20		/* Schedule penalty */
 
 #define raw_smp_processor_id()	(S390_lowcore.cpu_nr)
-
-/*
- * returns 1 if cpu is in stopped/check stopped state or not operational
- * returns 0 otherwise
- */
-static inline int
-smp_cpu_not_running(int cpu)
-{
-	__u32 status;
-
-	switch (signal_processor_ps(&status, 0, cpu, sigp_sense)) {
-	case sigp_order_code_accepted:
-	case sigp_status_stored:
-		/* Check for stopped and check stop state */
-		if (status & 0x50)
-			return 1;
-		break;
-	case sigp_not_operational:
-		return 1;
-	default:
-		break;
-	}
-	return 0;
-}
-
-#define cpu_logical_map(cpu) (cpu)
+#define cpu_logical_map(cpu)	(cpu)
 
 extern int __cpu_disable (void);
 extern void __cpu_die (unsigned int cpu);
@@ -91,11 +66,6 @@ extern void arch_send_call_function_ipi(cpumask_t mask);
 
 #endif
 
-#ifndef CONFIG_SMP
-#define hard_smp_processor_id()		0
-#define smp_cpu_not_running(cpu)	1
-#endif
-
 #ifdef CONFIG_HOTPLUG_CPU
 extern int smp_rescan_cpus(void);
 #else
diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index 9261495ca2c..56c16876b91 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -71,6 +71,23 @@ static DEFINE_PER_CPU(struct cpu, cpu_devices);
 
 static void smp_ext_bitcall(int, ec_bit_sig);
 
+static int cpu_stopped(int cpu)
+{
+	__u32 status;
+
+	switch (signal_processor_ps(&status, 0, cpu, sigp_sense)) {
+	case sigp_order_code_accepted:
+	case sigp_status_stored:
+		/* Check for stopped and check stop state */
+		if (status & 0x50)
+			return 1;
+		break;
+	default:
+		break;
+	}
+	return 0;
+}
+
 void smp_send_stop(void)
 {
 	int cpu, rc;
@@ -87,7 +104,7 @@ void smp_send_stop(void)
 			rc = signal_processor(cpu, sigp_stop);
 		} while (rc == sigp_busy);
 
-		while (!smp_cpu_not_running(cpu))
+		while (!cpu_stopped(cpu))
 			cpu_relax();
 	}
 }
@@ -270,19 +287,6 @@ static inline void smp_get_save_area(unsigned int cpu, unsigned int phy_cpu) { }
 
 #endif /* CONFIG_ZFCPDUMP */
 
-static int cpu_stopped(int cpu)
-{
-	__u32 status;
-
-	/* Check for stopped state */
-	if (signal_processor_ps(&status, 0, cpu, sigp_sense) ==
-	    sigp_status_stored) {
-		if (status & 0x40)
-			return 1;
-	}
-	return 0;
-}
-
 static int cpu_known(int cpu_id)
 {
 	int cpu;
@@ -636,7 +640,7 @@ int __cpu_disable(void)
 void __cpu_die(unsigned int cpu)
 {
 	/* Wait until target cpu is down */
-	while (!smp_cpu_not_running(cpu))
+	while (!cpu_stopped(cpu))
 		cpu_relax();
 	smp_free_lowcore(cpu);
 	pr_info("Processor %d stopped\n", cpu);
-- 
cgit v1.2.3


From bde69af2ab696eebfac9583ea1e8a46b571e317f Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Fri, 11 Sep 2009 10:29:06 +0200
Subject: [S390] Wire up page fault events for software perf counters.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/mm/fault.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c
index e5e119fe03b..1abbadd497e 100644
--- a/arch/s390/mm/fault.c
+++ b/arch/s390/mm/fault.c
@@ -10,6 +10,7 @@
  *    Copyright (C) 1995  Linus Torvalds
  */
 
+#include <linux/perf_counter.h>
 #include <linux/signal.h>
 #include <linux/sched.h>
 #include <linux/kernel.h>
@@ -305,7 +306,7 @@ do_exception(struct pt_regs *regs, unsigned long error_code, int write)
 	 * interrupts again and then search the VMAs
 	 */
 	local_irq_enable();
-
+	perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS, 1, 0, regs, address);
 	down_read(&mm->mmap_sem);
 
 	si_code = SEGV_MAPERR;
@@ -363,11 +364,15 @@ good_area:
 		}
 		BUG();
 	}
-	if (fault & VM_FAULT_MAJOR)
+	if (fault & VM_FAULT_MAJOR) {
 		tsk->maj_flt++;
-	else
+		perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, 0,
+				     regs, address);
+	} else {
 		tsk->min_flt++;
-
+		perf_swcounter_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, 0,
+				     regs, address);
+	}
         up_read(&mm->mmap_sem);
 	/*
 	 * The instruction that caused the program check will
-- 
cgit v1.2.3


From b7cfda9fc3d7aa60cffab5367f2a72a4a70060cd Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Mon, 7 Sep 2009 15:06:42 +0100
Subject: ARM: Fix pfn_valid() for sparse memory

On OMAP platforms, some people want to declare to segment up the memory
between the kernel and a separate application such that there is a hole
in the middle of the memory as far as Linux is concerned.  However,
they want to be able to mmap() the hole.

This currently causes problems, because update_mmu_cache() thinks that
there are valid struct pages for the "hole".  Fix this by making
pfn_valid() slightly more expensive, by checking whether the PFN is
contained within the meminfo array.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Tested-by: Khasim Syed Mohammed <khasim@ti.com>
---
 arch/arm/include/asm/memory.h | 17 -----------------
 arch/arm/include/asm/page.h   |  4 ++++
 arch/arm/mm/init.c            | 32 ++++++++++++++++++++++++++++++++
 3 files changed, 36 insertions(+), 17 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h
index 85763db8744..b3b54c6216a 100644
--- a/arch/arm/include/asm/memory.h
+++ b/arch/arm/include/asm/memory.h
@@ -212,7 +212,6 @@ static inline __deprecated void *bus_to_virt(unsigned long x)
  *
  *  page_to_pfn(page)	convert a struct page * to a PFN number
  *  pfn_to_page(pfn)	convert a _valid_ PFN number to struct page *
- *  pfn_valid(pfn)	indicates whether a PFN number is valid
  *
  *  virt_to_page(k)	convert a _valid_ virtual address to struct page *
  *  virt_addr_valid(k)	indicates whether a virtual address is valid
@@ -221,10 +220,6 @@ static inline __deprecated void *bus_to_virt(unsigned long x)
 
 #define ARCH_PFN_OFFSET		PHYS_PFN_OFFSET
 
-#ifndef CONFIG_SPARSEMEM
-#define pfn_valid(pfn)		((pfn) >= PHYS_PFN_OFFSET && (pfn) < (PHYS_PFN_OFFSET + max_mapnr))
-#endif
-
 #define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
 #define virt_addr_valid(kaddr)	((unsigned long)(kaddr) >= PAGE_OFFSET && (unsigned long)(kaddr) < (unsigned long)high_memory)
 
@@ -241,18 +236,6 @@ static inline __deprecated void *bus_to_virt(unsigned long x)
 #define arch_pfn_to_nid(pfn)	PFN_TO_NID(pfn)
 #define arch_local_page_offset(pfn, nid) LOCAL_MAP_NR((pfn) << PAGE_SHIFT)
 
-#define pfn_valid(pfn)						\
-	({							\
-		unsigned int nid = PFN_TO_NID(pfn);		\
-		int valid = nid < MAX_NUMNODES;			\
-		if (valid) {					\
-			pg_data_t *node = NODE_DATA(nid);	\
-			valid = (pfn - node->node_start_pfn) <	\
-				node->node_spanned_pages;	\
-		}						\
-		valid;						\
-	})
-
 #define virt_to_page(kaddr)					\
 	(ADDR_TO_MAPBASE(kaddr) + LOCAL_MAP_NR(kaddr))
 
diff --git a/arch/arm/include/asm/page.h b/arch/arm/include/asm/page.h
index 9c746af1bf6..3a32af4cce3 100644
--- a/arch/arm/include/asm/page.h
+++ b/arch/arm/include/asm/page.h
@@ -194,6 +194,10 @@ typedef unsigned long pgprot_t;
 
 typedef struct page *pgtable_t;
 
+#ifndef CONFIG_SPARSEMEM
+extern int pfn_valid(unsigned long);
+#endif
+
 #include <asm/memory.h>
 
 #endif /* !__ASSEMBLY__ */
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index 3a7279c1ce5..ea36186f32c 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -15,6 +15,7 @@
 #include <linux/mman.h>
 #include <linux/nodemask.h>
 #include <linux/initrd.h>
+#include <linux/sort.h>
 #include <linux/highmem.h>
 
 #include <asm/mach-types.h>
@@ -349,12 +350,43 @@ static void __init bootmem_free_node(int node, struct meminfo *mi)
 	free_area_init_node(node, zone_size, min, zhole_size);
 }
 
+#ifndef CONFIG_SPARSEMEM
+int pfn_valid(unsigned long pfn)
+{
+	struct meminfo *mi = &meminfo;
+	unsigned int left = 0, right = mi->nr_banks;
+
+	do {
+		unsigned int mid = (right + left) / 2;
+		struct membank *bank = &mi->bank[mid];
+
+		if (pfn < bank_pfn_start(bank))
+			right = mid;
+		else if (pfn >= bank_pfn_end(bank))
+			left = mid + 1;
+		else
+			return 1;
+	} while (left < right);
+	return 0;
+}
+EXPORT_SYMBOL(pfn_valid);
+#endif
+
+static int __init meminfo_cmp(const void *_a, const void *_b)
+{
+	const struct membank *a = _a, *b = _b;
+	long cmp = bank_pfn_start(a) - bank_pfn_start(b);
+	return cmp < 0 ? -1 : cmp > 0 ? 1 : 0;
+}
+
 void __init bootmem_init(void)
 {
 	struct meminfo *mi = &meminfo;
 	unsigned long min, max_low, max_high;
 	int node, initrd_node;
 
+	sort(&mi->bank, mi->nr_banks, sizeof(mi->bank[0]), meminfo_cmp, NULL);
+
 	/*
 	 * Locate which node contains the ramdisk image, if any.
 	 */
-- 
cgit v1.2.3


From f17a1f06d2fa93f4825be572622eb02c4894db4e Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@stericsson.com>
Date: Tue, 4 Aug 2009 01:01:02 +0100
Subject: ARM: 5636/1: Move vendor enum to AMBA include

This moves the primecell vendor enum definition inside vic.c
out to linux/amba/bus.h where it belongs and replace any
occurances of specific vendor ID:s with the respective enums
instead.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/common/vic.c | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c
index bc1f9ad61ff..920ced0b73c 100644
--- a/arch/arm/common/vic.c
+++ b/arch/arm/common/vic.c
@@ -22,6 +22,7 @@
 #include <linux/list.h>
 #include <linux/io.h>
 #include <linux/sysdev.h>
+#include <linux/amba/bus.h>
 
 #include <asm/mach/irq.h>
 #include <asm/hardware/vic.h>
@@ -272,11 +273,6 @@ static struct irq_chip vic_chip = {
 static void vik_init_st(void __iomem *base, unsigned int irq_start,
 			 u32 vic_sources);
 
-enum vic_vendor {
-	VENDOR_ARM = 0x41,
-	VENDOR_ST = 0x80,
-};
-
 /**
  * vic_init - initialise a vectored interrupt controller
  * @base: iomem base address
@@ -289,7 +285,7 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
 {
 	unsigned int i;
 	u32 cellid = 0;
-	enum vic_vendor vendor;
+	enum amba_vendor vendor;
 
 	/* Identify which VIC cell this one is, by reading the ID */
 	for (i = 0; i < 4; i++) {
@@ -301,13 +297,13 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
 	       base, cellid, vendor);
 
 	switch(vendor) {
-	case VENDOR_ST:
+	case AMBA_VENDOR_ST:
 		vik_init_st(base, irq_start, vic_sources);
 		return;
 	default:
 		printk(KERN_WARNING "VIC: unknown vendor, continuing anyways\n");
 		/* fall through */
-	case VENDOR_ARM:
+	case AMBA_VENDOR_ARM:
 		break;
 	}
 
-- 
cgit v1.2.3


From c1cb6b7fb5190ad55b31aa3289d48fedd288ddaa Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Sat, 12 Sep 2009 12:00:17 +0100
Subject: [ARM] Update mach-types

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/tools/mach-types | 68 ++++++++++++++++++++++++++++++++++++++++++++---
 1 file changed, 64 insertions(+), 4 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index 200d83a9828..c8c55b46934 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -12,7 +12,7 @@
 #
 #   http://www.arm.linux.org.uk/developer/machines/?action=new
 #
-# Last update: Sat Aug 1 16:26:02 2009
+# Last update: Sat Sep 12 12:00:16 2009
 #
 # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
 #
@@ -1962,7 +1962,7 @@ ethernut5		MACH_ETHERNUT5		ETHERNUT5		1971
 arm11			MACH_ARM11		ARM11			1972
 cpuat9260		MACH_CPUAT9260		CPUAT9260		1973
 cpupxa255		MACH_CPUPXA255		CPUPXA255		1974
-cpuimx27		MACH_CPUIMX27		CPUIMX27		1975
+eukrea_cpuimx27		MACH_CPUIMX27		CPUIMX27		1975
 cheflux			MACH_CHEFLUX		CHEFLUX			1976
 eb_cpux9k2		MACH_EB_CPUX9K2		EB_CPUX9K2		1977
 opcotec			MACH_OPCOTEC		OPCOTEC			1978
@@ -2249,14 +2249,14 @@ omap3_phrazer		MACH_OMAP3_PHRAZER	OMAP3_PHRAZER		2261
 darwin			MACH_DARWIN		DARWIN			2262
 oratiscomu		MACH_ORATISCOMU		ORATISCOMU		2263
 rtsbc20			MACH_RTSBC20		RTSBC20			2264
-i780			MACH_I780		I780			2265
+sgh_i780		MACH_I780		I780			2265
 gemini324		MACH_GEMINI324		GEMINI324		2266
 oratislan		MACH_ORATISLAN		ORATISLAN		2267
 oratisalog		MACH_ORATISALOG		ORATISALOG		2268
 oratismadi		MACH_ORATISMADI		ORATISMADI		2269
 oratisot16		MACH_ORATISOT16		ORATISOT16		2270
 oratisdesk		MACH_ORATISDESK		ORATISDESK		2271
-v2p_ca9			MACH_V2P_CA9		V2P_CA9			2272
+v2_ca9			MACH_V2P_CA9		V2P_CA9			2272
 sintexo			MACH_SINTEXO		SINTEXO			2273
 cm3389			MACH_CM3389		CM3389			2274
 omap3_cio		MACH_OMAP3_CIO		OMAP3_CIO		2275
@@ -2349,3 +2349,63 @@ openrd_client		MACH_OPENRD_CLIENT	OPENRD_CLIENT		2361
 hpipaq11x		MACH_HPIPAQ11X		HPIPAQ11X		2362
 wayland			MACH_WAYLAND		WAYLAND			2363
 acnbsx102		MACH_ACNBSX102		ACNBSX102		2364
+hwat91			MACH_HWAT91		HWAT91			2365
+at91sam9263cs		MACH_AT91SAM9263CS	AT91SAM9263CS		2366
+csb732			MACH_CSB732		CSB732			2367
+u8500			MACH_U8500		U8500			2368
+huqiu			MACH_HUQIU		HUQIU			2369
+mx51_kunlun		MACH_MX51_KUNLUN	MX51_KUNLUN		2370
+pmt1g			MACH_PMT1G		PMT1G			2371
+htcelf			MACH_HTCELF		HTCELF			2372
+armadillo420		MACH_ARMADILLO420	ARMADILLO420		2373
+armadillo440		MACH_ARMADILLO440	ARMADILLO440		2374
+u_chip_dual_arm		MACH_U_CHIP_DUAL_ARM	U_CHIP_DUAL_ARM		2375
+csr_bdb3		MACH_CSR_BDB3		CSR_BDB3		2376
+dolby_cat1018		MACH_DOLBY_CAT1018	DOLBY_CAT1018		2377
+hy9307			MACH_HY9307		HY9307			2378
+aspire_easystore	MACH_A_ES		A_ES			2379
+davinci_irif		MACH_DAVINCI_IRIF	DAVINCI_IRIF		2380
+agama9263		MACH_AGAMA9263		AGAMA9263		2381
+marvell_jasper		MACH_MARVELL_JASPER	MARVELL_JASPER		2382
+flint			MACH_FLINT		FLINT			2383
+tavorevb3		MACH_TAVOREVB3		TAVOREVB3		2384
+sch_m490		MACH_SCH_M490		SCH_M490		2386
+rbl01			MACH_RBL01		RBL01			2387
+omnifi			MACH_OMNIFI		OMNIFI			2388
+otavalo			MACH_OTAVALO		OTAVALO			2389
+sienna			MACH_SIENNA		SIENNA			2390
+htc_excalibur_s620	MACH_HTC_EXCALIBUR_S620	HTC_EXCALIBUR_S620	2391
+htc_opal		MACH_HTC_OPAL		HTC_OPAL		2392
+touchbook		MACH_TOUCHBOOK		TOUCHBOOK		2393
+latte			MACH_LATTE		LATTE			2394
+xa200			MACH_XA200		XA200			2395
+nimrod			MACH_NIMROD		NIMROD			2396
+cc9p9215_3g		MACH_CC9P9215_3G	CC9P9215_3G		2397
+cc9p9215_3gjs		MACH_CC9P9215_3GJS	CC9P9215_3GJS		2398
+tk71			MACH_TK71		TK71			2399
+comham3525		MACH_COMHAM3525		COMHAM3525		2400
+mx31erebus		MACH_MX31EREBUS		MX31EREBUS		2401
+mcardmx27		MACH_MCARDMX27		MCARDMX27		2402
+paradise		MACH_PARADISE		PARADISE		2403
+tide			MACH_TIDE		TIDE			2404
+wzl2440			MACH_WZL2440		WZL2440			2405
+sdrdemo			MACH_SDRDEMO		SDRDEMO			2406
+ethercan2		MACH_ETHERCAN2		ETHERCAN2		2407
+ecmimg20		MACH_ECMIMG20		ECMIMG20		2408
+omap_dragon		MACH_OMAP_DRAGON	OMAP_DRAGON		2409
+halo			MACH_HALO		HALO			2410
+huangshan		MACH_HUANGSHAN		HUANGSHAN		2411
+vl_ma2sc		MACH_VL_MA2SC		VL_MA2SC		2412
+raumfeld_rc		MACH_RAUMFELD_RC	RAUMFELD_RC		2413
+raumfeld_connector	MACH_RAUMFELD_CONNECTOR	RAUMFELD_CONNECTOR	2414
+raumfeld_speaker	MACH_RAUMFELD_SPEAKER	RAUMFELD_SPEAKER	2415
+multibus_master		MACH_MULTIBUS_MASTER	MULTIBUS_MASTER		2416
+multibus_pbk		MACH_MULTIBUS_PBK	MULTIBUS_PBK		2417
+tnetv107x		MACH_TNETV107X		TNETV107X		2418
+snake			MACH_SNAKE		SNAKE			2419
+cwmx27			MACH_CWMX27		CWMX27			2420
+sch_m480		MACH_SCH_M480		SCH_M480		2421
+platypus		MACH_PLATYPUS		PLATYPUS		2422
+pss2			MACH_PSS2		PSS2			2423
+davinci_apm150		MACH_DAVINCI_APM150	DAVINCI_APM150		2424
+str9100			MACH_STR9100		STR9100			2425
-- 
cgit v1.2.3


From 549d042df240dfb4203bab40ad44f9336751b7d6 Mon Sep 17 00:00:00 2001
From: Borislav Petkov <borislav.petkov@amd.com>
Date: Fri, 24 Jul 2009 13:51:42 +0200
Subject: x86, mce: pass mce info to EDAC for decoding

Move NB decoder along with required defines to EDAC MCE core. Add
registration routines for further decoding of the MCE info in the AMD64
EDAC module.

CC: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
---
 arch/x86/kernel/cpu/mcheck/mce.c | 7 +++++++
 1 file changed, 7 insertions(+)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index 01213048f62..b82866f6adf 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -183,6 +183,11 @@ void mce_log(struct mce *mce)
 	set_bit(0, &mce_need_notify);
 }
 
+void __weak decode_mce(struct mce *m)
+{
+	return;
+}
+
 static void print_mce(struct mce *m)
 {
 	printk(KERN_EMERG
@@ -205,6 +210,8 @@ static void print_mce(struct mce *m)
 	printk(KERN_EMERG "PROCESSOR %u:%x TIME %llu SOCKET %u APIC %x\n",
 			m->cpuvendor, m->cpuid, m->time, m->socketid,
 			m->apicid);
+
+	decode_mce(m);
 }
 
 static void print_mce_head(void)
-- 
cgit v1.2.3


From 22223c9b417be5fd0ab2cf9ad17eb7bd1e19f7b9 Mon Sep 17 00:00:00 2001
From: Borislav Petkov <borislav.petkov@amd.com>
Date: Tue, 28 Jul 2009 14:47:10 +0200
Subject: x86, mce: do not compile mcelog message on AMD

Now that decoding is done in-kernel, suppress mcelog message part.

CC: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
---
 arch/x86/kernel/cpu/mcheck/mce.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index b82866f6adf..9bfe9d2ea61 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -222,7 +222,10 @@ static void print_mce_head(void)
 static void print_mce_tail(void)
 {
 	printk(KERN_EMERG "This is not a software problem!\n"
-	       "Run through mcelog --ascii to decode and contact your hardware vendor\n");
+#if (!defined(CONFIG_EDAC) || !defined(CONFIG_CPU_SUP_AMD))
+	       "Run through mcelog --ascii to decode and contact your hardware vendor\n"
+#endif
+	       );
 }
 
 #define PANIC_TIMEOUT 5 /* 5 seconds */
-- 
cgit v1.2.3


From 353f6dd2dec992ddd34620a94b051b0f76227379 Mon Sep 17 00:00:00 2001
From: Anirban Sinha <asinha@zeugmasystems.com>
Date: Mon, 14 Sep 2009 11:13:37 -0700
Subject: cleanup console_print()

console_print() is an old legacy interface mostly unused in the entire
kernel tree. It's best to clean up its existing use and let developers
use their own implementation of it as they feel fit.

Signed-off-by: Anirban Sinha <asinha@zeugmasystems.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/ia64/kernel/head.S    | 1 +
 arch/ia64/kernel/head.h    | 1 +
 arch/ia64/kernel/process.c | 7 +++++++
 3 files changed, 9 insertions(+)
 create mode 100644 arch/ia64/kernel/head.h

(limited to 'arch')

diff --git a/arch/ia64/kernel/head.S b/arch/ia64/kernel/head.S
index 23f846de62d..e6c5c3d5e1f 100644
--- a/arch/ia64/kernel/head.S
+++ b/arch/ia64/kernel/head.S
@@ -34,6 +34,7 @@
 #include <asm/mca_asm.h>
 #include <linux/init.h>
 #include <linux/linkage.h>
+#include "head.h"
 
 #ifdef CONFIG_HOTPLUG_CPU
 #define SAL_PSR_BITS_TO_SET				\
diff --git a/arch/ia64/kernel/head.h b/arch/ia64/kernel/head.h
new file mode 100644
index 00000000000..2e2ac6824e6
--- /dev/null
+++ b/arch/ia64/kernel/head.h
@@ -0,0 +1 @@
+extern void console_print(const char *s);
diff --git a/arch/ia64/kernel/process.c b/arch/ia64/kernel/process.c
index 89969e95004..9bcec9945c1 100644
--- a/arch/ia64/kernel/process.c
+++ b/arch/ia64/kernel/process.c
@@ -161,6 +161,13 @@ show_regs (struct pt_regs *regs)
 		show_stack(NULL, NULL);
 }
 
+/* local support for deprecated console_print */
+void
+console_print(const char *s)
+{
+	printk(KERN_EMERG "%s", s);
+}
+
 void
 do_notify_resume_user(sigset_t *unused, struct sigscratch *scr, long in_syscall)
 {
-- 
cgit v1.2.3


From 2f82af08fcc7dc01a7e98a49a5995a77e32a2925 Mon Sep 17 00:00:00 2001
From: Nicolas Pitre <nico@fluxnic.net>
Date: Mon, 14 Sep 2009 03:25:28 -0400
Subject: Nicolas Pitre has a new email address

Due to problems at cam.org, my nico@cam.org email address is no longer
valid.  FRom now on, nico@fluxnic.net should be used instead.

Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/arm/boot/compressed/head-sa1100.S         | 2 +-
 arch/arm/lib/lib1funcs.S                       | 2 +-
 arch/arm/lib/sha1.S                            | 2 +-
 arch/arm/mach-sa1100/include/mach/assabet.h    | 2 +-
 arch/arm/mach-sa1100/include/mach/hardware.h   | 2 +-
 arch/arm/mach-sa1100/include/mach/memory.h     | 2 +-
 arch/arm/mach-sa1100/include/mach/neponset.h   | 2 +-
 arch/arm/mach-sa1100/include/mach/system.h     | 2 +-
 arch/arm/mach-sa1100/include/mach/uncompress.h | 2 +-
 arch/arm/mach-sa1100/pm.c                      | 2 +-
 arch/arm/mach-sa1100/time.c                    | 2 +-
 arch/arm/mm/proc-xscale.S                      | 2 +-
 arch/arm/plat-iop/setup.c                      | 2 +-
 arch/arm/plat-omap/include/mach/system.h       | 2 +-
 14 files changed, 14 insertions(+), 14 deletions(-)

(limited to 'arch')

diff --git a/arch/arm/boot/compressed/head-sa1100.S b/arch/arm/boot/compressed/head-sa1100.S
index 4c8c0e46027..6179d94dd5c 100644
--- a/arch/arm/boot/compressed/head-sa1100.S
+++ b/arch/arm/boot/compressed/head-sa1100.S
@@ -1,7 +1,7 @@
 /* 
  * linux/arch/arm/boot/compressed/head-sa1100.S
  * 
- * Copyright (C) 1999 Nicolas Pitre <nico@cam.org>
+ * Copyright (C) 1999 Nicolas Pitre <nico@fluxnic.net>
  * 
  * SA1100 specific tweaks.  This is merged into head.S by the linker.
  *
diff --git a/arch/arm/lib/lib1funcs.S b/arch/arm/lib/lib1funcs.S
index 67964bcfc85..6dc06487f3c 100644
--- a/arch/arm/lib/lib1funcs.S
+++ b/arch/arm/lib/lib1funcs.S
@@ -1,7 +1,7 @@
 /*
  * linux/arch/arm/lib/lib1funcs.S: Optimized ARM division routines
  *
- * Author: Nicolas Pitre <nico@cam.org>
+ * Author: Nicolas Pitre <nico@fluxnic.net>
  *   - contributed to gcc-3.4 on Sep 30, 2003
  *   - adapted for the Linux kernel on Oct 2, 2003
  */
diff --git a/arch/arm/lib/sha1.S b/arch/arm/lib/sha1.S
index 09b548cac1a..eb0edb80d7b 100644
--- a/arch/arm/lib/sha1.S
+++ b/arch/arm/lib/sha1.S
@@ -3,7 +3,7 @@
  *
  *  SHA transform optimized for ARM
  *
- *  Copyright:	(C) 2005 by Nicolas Pitre <nico@cam.org>
+ *  Copyright:	(C) 2005 by Nicolas Pitre <nico@fluxnic.net>
  *  Created:	September 17, 2005
  *
  *  This program is free software; you can redistribute it and/or modify
diff --git a/arch/arm/mach-sa1100/include/mach/assabet.h b/arch/arm/mach-sa1100/include/mach/assabet.h
index 3959b20d5d1..28c2cf50c25 100644
--- a/arch/arm/mach-sa1100/include/mach/assabet.h
+++ b/arch/arm/mach-sa1100/include/mach/assabet.h
@@ -1,7 +1,7 @@
 /*
  * arch/arm/mach-sa1100/include/mach/assabet.h
  *
- * Created 2000/06/05 by Nicolas Pitre <nico@cam.org>
+ * Created 2000/06/05 by Nicolas Pitre <nico@fluxnic.net>
  *
  * This file contains the hardware specific definitions for Assabet
  * Only include this file from SA1100-specific files.
diff --git a/arch/arm/mach-sa1100/include/mach/hardware.h b/arch/arm/mach-sa1100/include/mach/hardware.h
index 60711822b12..99f5856d8de 100644
--- a/arch/arm/mach-sa1100/include/mach/hardware.h
+++ b/arch/arm/mach-sa1100/include/mach/hardware.h
@@ -1,7 +1,7 @@
 /*
  * arch/arm/mach-sa1100/include/mach/hardware.h
  *
- * Copyright (C) 1998 Nicolas Pitre <nico@cam.org>
+ * Copyright (C) 1998 Nicolas Pitre <nico@fluxnic.net>
  *
  * This file contains the hardware definitions for SA1100 architecture
  *
diff --git a/arch/arm/mach-sa1100/include/mach/memory.h b/arch/arm/mach-sa1100/include/mach/memory.h
index e9f8eed900f..d5277f9bee7 100644
--- a/arch/arm/mach-sa1100/include/mach/memory.h
+++ b/arch/arm/mach-sa1100/include/mach/memory.h
@@ -1,7 +1,7 @@
 /*
  * arch/arm/mach-sa1100/include/mach/memory.h
  *
- * Copyright (C) 1999-2000 Nicolas Pitre <nico@cam.org>
+ * Copyright (C) 1999-2000 Nicolas Pitre <nico@fluxnic.net>
  */
 
 #ifndef __ASM_ARCH_MEMORY_H
diff --git a/arch/arm/mach-sa1100/include/mach/neponset.h b/arch/arm/mach-sa1100/include/mach/neponset.h
index d3f044f92c0..ffe2bc45eed 100644
--- a/arch/arm/mach-sa1100/include/mach/neponset.h
+++ b/arch/arm/mach-sa1100/include/mach/neponset.h
@@ -1,7 +1,7 @@
 /*
  * arch/arm/mach-sa1100/include/mach/neponset.h
  *
- * Created 2000/06/05 by Nicolas Pitre <nico@cam.org>
+ * Created 2000/06/05 by Nicolas Pitre <nico@fluxnic.net>
  *
  * This file contains the hardware specific definitions for Assabet
  * Only include this file from SA1100-specific files.
diff --git a/arch/arm/mach-sa1100/include/mach/system.h b/arch/arm/mach-sa1100/include/mach/system.h
index 942b153e251..ba9da9f7f18 100644
--- a/arch/arm/mach-sa1100/include/mach/system.h
+++ b/arch/arm/mach-sa1100/include/mach/system.h
@@ -1,7 +1,7 @@
 /*
  * arch/arm/mach-sa1100/include/mach/system.h
  *
- * Copyright (c) 1999 Nicolas Pitre <nico@cam.org>
+ * Copyright (c) 1999 Nicolas Pitre <nico@fluxnic.net>
  */
 #include <mach/hardware.h>
 
diff --git a/arch/arm/mach-sa1100/include/mach/uncompress.h b/arch/arm/mach-sa1100/include/mach/uncompress.h
index 714160b03d7..6cb39ddde65 100644
--- a/arch/arm/mach-sa1100/include/mach/uncompress.h
+++ b/arch/arm/mach-sa1100/include/mach/uncompress.h
@@ -1,7 +1,7 @@
 /*
  * arch/arm/mach-sa1100/include/mach/uncompress.h
  *
- * (C) 1999 Nicolas Pitre <nico@cam.org>
+ * (C) 1999 Nicolas Pitre <nico@fluxnic.net>
  *
  * Reorganised to be machine independent.
  */
diff --git a/arch/arm/mach-sa1100/pm.c b/arch/arm/mach-sa1100/pm.c
index 111cce67ad2..c83fdc80edf 100644
--- a/arch/arm/mach-sa1100/pm.c
+++ b/arch/arm/mach-sa1100/pm.c
@@ -15,7 +15,7 @@
  * 			Save more value for the resume function! Support
  * 			Bitsy/Assabet/Freebird board
  *
- * 2001-08-29:	Nicolas Pitre <nico@cam.org>
+ * 2001-08-29:	Nicolas Pitre <nico@fluxnic.net>
  * 			Cleaned up, pushed platform dependent stuff
  * 			in the platform specific files.
  *
diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c
index 711c0295c66..95d92e8e56a 100644
--- a/arch/arm/mach-sa1100/time.c
+++ b/arch/arm/mach-sa1100/time.c
@@ -4,7 +4,7 @@
  * Copyright (C) 1998 Deborah Wallach.
  * Twiddles  (C) 1999 Hugo Fiennes <hugo@empeg.com>
  *
- * 2000/03/29 (C) Nicolas Pitre <nico@cam.org>
+ * 2000/03/29 (C) Nicolas Pitre <nico@fluxnic.net>
  *	Rewritten: big cleanup, much simpler, better HZ accuracy.
  *
  */
diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S
index 0cce37b9393..423394260bc 100644
--- a/arch/arm/mm/proc-xscale.S
+++ b/arch/arm/mm/proc-xscale.S
@@ -17,7 +17,7 @@
  *
  * 2001 Sep 08:
  *	Completely revisited, many important fixes
- *	Nicolas Pitre <nico@cam.org>
+ *	Nicolas Pitre <nico@fluxnic.net>
  */
 
 #include <linux/linkage.h>
diff --git a/arch/arm/plat-iop/setup.c b/arch/arm/plat-iop/setup.c
index 9e573e78176..bade586fed0 100644
--- a/arch/arm/plat-iop/setup.c
+++ b/arch/arm/plat-iop/setup.c
@@ -1,7 +1,7 @@
 /*
  * arch/arm/plat-iop/setup.c
  *
- * Author: Nicolas Pitre <nico@cam.org>
+ * Author: Nicolas Pitre <nico@fluxnic.net>
  * Copyright (C) 2001 MontaVista Software, Inc.
  * Copyright (C) 2004 Intel Corporation.
  *
diff --git a/arch/arm/plat-omap/include/mach/system.h b/arch/arm/plat-omap/include/mach/system.h
index 1060e345423..ed8ec747726 100644
--- a/arch/arm/plat-omap/include/mach/system.h
+++ b/arch/arm/plat-omap/include/mach/system.h
@@ -1,6 +1,6 @@
 /*
  * Copied from arch/arm/mach-sa1100/include/mach/system.h
- * Copyright (c) 1999 Nicolas Pitre <nico@cam.org>
+ * Copyright (c) 1999 Nicolas Pitre <nico@fluxnic.net>
  */
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H
-- 
cgit v1.2.3