From c1558b55c55620f54f0f78cb8295947a2a3f6de2 Mon Sep 17 00:00:00 2001 From: Alessandro Rubini Date: Sun, 20 Sep 2009 23:28:24 +0200 Subject: ARM Nomadik: use new OneNand name and pdata This enables the onenand with the new platform device name. Moreover, it fixes a related typo that doesn't deserve a separate patch. Signed-off-by: Alessandro Rubini Acked-by: Andrea Gallo Signed-off-by: David Woodhouse --- arch/arm/mach-nomadik/board-nhk8815.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c index 6bfd537d5af..781b915819c 100644 --- a/arch/arm/mach-nomadik/board-nhk8815.c +++ b/arch/arm/mach-nomadik/board-nhk8815.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include #include @@ -142,7 +143,7 @@ static struct mtd_partition nhk8815_onenand_partitions[] = { } }; -static struct flash_platform_data nhk8815_onenand_data = { +static struct onenand_platform_data nhk8815_onenand_data = { .parts = nhk8815_onenand_partitions, .nr_parts = ARRAY_SIZE(nhk8815_onenand_partitions), }; @@ -156,7 +157,7 @@ static struct resource nhk8815_onenand_resource[] = { }; static struct platform_device nhk8815_onenand_device = { - .name = "onenand", + .name = "onenand-flash", .id = -1, .dev = { .platform_data = &nhk8815_onenand_data, @@ -167,10 +168,10 @@ static struct platform_device nhk8815_onenand_device = { static void __init nhk8815_onenand_init(void) { -#ifdef CONFIG_ONENAND +#ifdef CONFIG_MTD_ONENAND /* Set up SMCS0 for OneNand */ - writel(0x000030db, FSMC_BCR0); - writel(0x02100551, FSMC_BTR0); + writel(0x000030db, FSMC_BCR(0)); + writel(0x02100551, FSMC_BTR(0)); #endif } -- cgit v1.2.3 From 266dead21675aeb89407b1213788cd924353d5e1 Mon Sep 17 00:00:00 2001 From: "Leo (Hao) Chen" Date: Fri, 9 Oct 2009 19:13:08 -0700 Subject: mtd: add bcmring nand driver Signed-off-by: Leo Hao Chen Signed-off-by: David Woodhouse --- arch/arm/mach-bcmring/arch.c | 10 ++ arch/arm/mach-bcmring/include/mach/reg_nand.h | 66 +++++++ arch/arm/mach-bcmring/include/mach/reg_umi.h | 237 ++++++++++++++++++++++++++ 3 files changed, 313 insertions(+) create mode 100644 arch/arm/mach-bcmring/include/mach/reg_nand.h create mode 100644 arch/arm/mach-bcmring/include/mach/reg_umi.h (limited to 'arch') diff --git a/arch/arm/mach-bcmring/arch.c b/arch/arm/mach-bcmring/arch.c index 0da693b0f7e..074dad6b1c1 100644 --- a/arch/arm/mach-bcmring/arch.c +++ b/arch/arm/mach-bcmring/arch.c @@ -76,9 +76,19 @@ static struct ctl_table bcmring_sysctl_reboot[] = { {} }; +static struct resource nand_resource[] = { + [0] = { + .start = MM_ADDR_IO_NAND, + .end = MM_ADDR_IO_NAND + 0x1000 - 1, + .flags = IORESOURCE_MEM, + }, +}; + static struct platform_device nand_device = { .name = "bcm-nand", .id = -1, + .resource = nand_resource, + .num_resources = ARRAY_SIZE(nand_resource), }; static struct platform_device *devices[] __initdata = { diff --git a/arch/arm/mach-bcmring/include/mach/reg_nand.h b/arch/arm/mach-bcmring/include/mach/reg_nand.h new file mode 100644 index 00000000000..387376ffb56 --- /dev/null +++ b/arch/arm/mach-bcmring/include/mach/reg_nand.h @@ -0,0 +1,66 @@ +/***************************************************************************** +* Copyright 2001 - 2008 Broadcom Corporation. All rights reserved. +* +* Unless you and Broadcom execute a separate written software license +* agreement governing use of this software, this software is licensed to you +* under the terms of the GNU General Public License version 2, available at +* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). +* +* Notwithstanding the above, under no circumstances may you combine this +* software in any way with any other Broadcom software provided under a +* license other than the GPL, without Broadcom's express prior written +* consent. +*****************************************************************************/ + +/* +* +***************************************************************************** +* +* REG_NAND.h +* +* PURPOSE: +* +* This file contains definitions for the nand registers: +* +* NOTES: +* +*****************************************************************************/ + +#if !defined(__ASM_ARCH_REG_NAND_H) +#define __ASM_ARCH_REG_NAND_H + +/* ---- Include Files ---------------------------------------------------- */ +#include +#include + +/* ---- Constants and Types ---------------------------------------------- */ + +#define HW_NAND_BASE MM_IO_BASE_NAND /* NAND Flash */ + +/* DMA accesses by the bootstrap need hard nonvirtual addresses */ +#define REG_NAND_CMD __REG16(HW_NAND_BASE + 0) +#define REG_NAND_ADDR __REG16(HW_NAND_BASE + 4) + +#define REG_NAND_PHYS_DATA16 (HW_NAND_BASE + 8) +#define REG_NAND_PHYS_DATA8 (HW_NAND_BASE + 8) +#define REG_NAND_DATA16 __REG16(REG_NAND_PHYS_DATA16) +#define REG_NAND_DATA8 __REG8(REG_NAND_PHYS_DATA8) + +/* use appropriate offset to make sure it start at the 1K boundary */ +#define REG_NAND_PHYS_DATA_DMA (HW_NAND_BASE + 0x400) +#define REG_NAND_DATA_DMA __REG32(REG_NAND_PHYS_DATA_DMA) + +/* Linux DMA requires physical address of the data register */ +#define REG_NAND_DATA16_PADDR HW_IO_VIRT_TO_PHYS(REG_NAND_PHYS_DATA16) +#define REG_NAND_DATA8_PADDR HW_IO_VIRT_TO_PHYS(REG_NAND_PHYS_DATA8) +#define REG_NAND_DATA_PADDR HW_IO_VIRT_TO_PHYS(REG_NAND_PHYS_DATA_DMA) + +#define NAND_BUS_16BIT() (0) +#define NAND_BUS_8BIT() (!NAND_BUS_16BIT()) + +/* Register offsets */ +#define REG_NAND_CMD_OFFSET (0) +#define REG_NAND_ADDR_OFFSET (4) +#define REG_NAND_DATA8_OFFSET (8) + +#endif diff --git a/arch/arm/mach-bcmring/include/mach/reg_umi.h b/arch/arm/mach-bcmring/include/mach/reg_umi.h new file mode 100644 index 00000000000..06a355481ea --- /dev/null +++ b/arch/arm/mach-bcmring/include/mach/reg_umi.h @@ -0,0 +1,237 @@ +/***************************************************************************** +* Copyright 2005 - 2008 Broadcom Corporation. All rights reserved. +* +* Unless you and Broadcom execute a separate written software license +* agreement governing use of this software, this software is licensed to you +* under the terms of the GNU General Public License version 2, available at +* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). +* +* Notwithstanding the above, under no circumstances may you combine this +* software in any way with any other Broadcom software provided under a +* license other than the GPL, without Broadcom's express prior written +* consent. +*****************************************************************************/ + +/* +* +***************************************************************************** +* +* REG_UMI.h +* +* PURPOSE: +* +* This file contains definitions for the nand registers: +* +* NOTES: +* +*****************************************************************************/ + +#if !defined(__ASM_ARCH_REG_UMI_H) +#define __ASM_ARCH_REG_UMI_H + +/* ---- Include Files ---------------------------------------------------- */ +#include +#include + +/* ---- Constants and Types ---------------------------------------------- */ + +/* Unified Memory Interface Ctrl Register */ +#define HW_UMI_BASE MM_IO_BASE_UMI + +/* Flash bank 0 timing and control register */ +#define REG_UMI_FLASH0_TCR __REG32(HW_UMI_BASE + 0x00) +/* Flash bank 1 timing and control register */ +#define REG_UMI_FLASH1_TCR __REG32(HW_UMI_BASE + 0x04) +/* Flash bank 2 timing and control register */ +#define REG_UMI_FLASH2_TCR __REG32(HW_UMI_BASE + 0x08) +/* MMD interface and control register */ +#define REG_UMI_MMD_ICR __REG32(HW_UMI_BASE + 0x0c) +/* NAND timing and control register */ +#define REG_UMI_NAND_TCR __REG32(HW_UMI_BASE + 0x18) +/* NAND ready/chip select register */ +#define REG_UMI_NAND_RCSR __REG32(HW_UMI_BASE + 0x1c) +/* NAND ECC control & status register */ +#define REG_UMI_NAND_ECC_CSR __REG32(HW_UMI_BASE + 0x20) +/* NAND ECC data register XXB2B1B0 */ +#define REG_UMI_NAND_ECC_DATA __REG32(HW_UMI_BASE + 0x24) +/* BCH ECC Parameter N */ +#define REG_UMI_BCH_N __REG32(HW_UMI_BASE + 0x40) +/* BCH ECC Parameter T */ +#define REG_UMI_BCH_K __REG32(HW_UMI_BASE + 0x44) +/* BCH ECC Parameter K */ +#define REG_UMI_BCH_T __REG32(HW_UMI_BASE + 0x48) +/* BCH ECC Contro Status */ +#define REG_UMI_BCH_CTRL_STATUS __REG32(HW_UMI_BASE + 0x4C) +/* BCH WR ECC 31:0 */ +#define REG_UMI_BCH_WR_ECC_0 __REG32(HW_UMI_BASE + 0x50) +/* BCH WR ECC 63:32 */ +#define REG_UMI_BCH_WR_ECC_1 __REG32(HW_UMI_BASE + 0x54) +/* BCH WR ECC 95:64 */ +#define REG_UMI_BCH_WR_ECC_2 __REG32(HW_UMI_BASE + 0x58) +/* BCH WR ECC 127:96 */ +#define REG_UMI_BCH_WR_ECC_3 __REG32(HW_UMI_BASE + 0x5c) +/* BCH WR ECC 155:128 */ +#define REG_UMI_BCH_WR_ECC_4 __REG32(HW_UMI_BASE + 0x60) +/* BCH Read Error Location 1,0 */ +#define REG_UMI_BCH_RD_ERR_LOC_1_0 __REG32(HW_UMI_BASE + 0x64) +/* BCH Read Error Location 3,2 */ +#define REG_UMI_BCH_RD_ERR_LOC_3_2 __REG32(HW_UMI_BASE + 0x68) +/* BCH Read Error Location 5,4 */ +#define REG_UMI_BCH_RD_ERR_LOC_5_4 __REG32(HW_UMI_BASE + 0x6c) +/* BCH Read Error Location 7,6 */ +#define REG_UMI_BCH_RD_ERR_LOC_7_6 __REG32(HW_UMI_BASE + 0x70) +/* BCH Read Error Location 9,8 */ +#define REG_UMI_BCH_RD_ERR_LOC_9_8 __REG32(HW_UMI_BASE + 0x74) +/* BCH Read Error Location 11,10 */ +#define REG_UMI_BCH_RD_ERR_LOC_B_A __REG32(HW_UMI_BASE + 0x78) + +/* REG_UMI_FLASH0/1/2_TCR, REG_UMI_SRAM0/1_TCR bits */ +/* Enable wait pin during burst write or read */ +#define REG_UMI_TCR_WAITEN 0x80000000 +/* Enable mem ctrlr to work iwth ext mem of lower freq than AHB clk */ +#define REG_UMI_TCR_LOWFREQ 0x40000000 +/* 1=synch write, 0=async write */ +#define REG_UMI_TCR_MEMTYPE_SYNCWRITE 0x20000000 +/* 1=synch read, 0=async read */ +#define REG_UMI_TCR_MEMTYPE_SYNCREAD 0x10000000 +/* 1=page mode read, 0=normal mode read */ +#define REG_UMI_TCR_MEMTYPE_PAGEREAD 0x08000000 +/* page size/burst size (wrap only) */ +#define REG_UMI_TCR_MEMTYPE_PGSZ_MASK 0x07000000 +/* 4 word */ +#define REG_UMI_TCR_MEMTYPE_PGSZ_4 0x00000000 +/* 8 word */ +#define REG_UMI_TCR_MEMTYPE_PGSZ_8 0x01000000 +/* 16 word */ +#define REG_UMI_TCR_MEMTYPE_PGSZ_16 0x02000000 +/* 32 word */ +#define REG_UMI_TCR_MEMTYPE_PGSZ_32 0x03000000 +/* 64 word */ +#define REG_UMI_TCR_MEMTYPE_PGSZ_64 0x04000000 +/* 128 word */ +#define REG_UMI_TCR_MEMTYPE_PGSZ_128 0x05000000 +/* 256 word */ +#define REG_UMI_TCR_MEMTYPE_PGSZ_256 0x06000000 +/* 512 word */ +#define REG_UMI_TCR_MEMTYPE_PGSZ_512 0x07000000 +/* Page read access cycle / Burst write latency (n+2 / n+1) */ +#define REG_UMI_TCR_TPRC_TWLC_MASK 0x00f80000 +/* Bus turnaround cycle (n) */ +#define REG_UMI_TCR_TBTA_MASK 0x00070000 +/* Write pulse width cycle (n+1) */ +#define REG_UMI_TCR_TWP_MASK 0x0000f800 +/* Write recovery cycle (n+1) */ +#define REG_UMI_TCR_TWR_MASK 0x00000600 +/* Write address setup cycle (n+1) */ +#define REG_UMI_TCR_TAS_MASK 0x00000180 +/* Output enable delay cycle (n) */ +#define REG_UMI_TCR_TOE_MASK 0x00000060 +/* Read access cycle / Burst read latency (n+2 / n+1) */ +#define REG_UMI_TCR_TRC_TLC_MASK 0x0000001f + +/* REG_UMI_MMD_ICR bits */ +/* Flash write protection pin control */ +#define REG_UMI_MMD_ICR_FLASH_WP 0x8000 +/* Extend hold time for sram0, sram1 csn (39 MHz operation) */ +#define REG_UMI_MMD_ICR_XHCS 0x4000 +/* Enable SDRAM 2 interface control */ +#define REG_UMI_MMD_ICR_SDRAM2EN 0x2000 +/* Enable merge of flash banks 0/1 to 512 MBit bank */ +#define REG_UMI_MMD_ICR_INST512 0x1000 +/* Enable merge of flash banks 1/2 to 512 MBit bank */ +#define REG_UMI_MMD_ICR_DATA512 0x0800 +/* Enable SDRAM interface control */ +#define REG_UMI_MMD_ICR_SDRAMEN 0x0400 +/* Polarity of busy state of Burst Wait Signal */ +#define REG_UMI_MMD_ICR_WAITPOL 0x0200 +/* Enable burst clock stopped when not accessing external burst flash/sram */ +#define REG_UMI_MMD_ICR_BCLKSTOP 0x0100 +/* Enable the peri1_csn to replace flash1_csn in 512 Mb flash mode */ +#define REG_UMI_MMD_ICR_PERI1EN 0x0080 +/* Enable the peri2_csn to replace sdram_csn */ +#define REG_UMI_MMD_ICR_PERI2EN 0x0040 +/* Enable the peri3_csn to replace sdram2_csn */ +#define REG_UMI_MMD_ICR_PERI3EN 0x0020 +/* Enable sram bank1 for H/W controlled MRS */ +#define REG_UMI_MMD_ICR_MRSB1 0x0010 +/* Enable sram bank0 for H/W controlled MRS */ +#define REG_UMI_MMD_ICR_MRSB0 0x0008 +/* Polarity for assert3ed state of H/W controlled MRS */ +#define REG_UMI_MMD_ICR_MRSPOL 0x0004 +/* 0: S/W controllable ZZ/MRS/CRE/P-Mode pin */ +/* 1: H/W controlled ZZ/MRS/CRE/P-Mode, same timing as CS */ +#define REG_UMI_MMD_ICR_MRSMODE 0x0002 +/* MRS state for S/W controlled mode */ +#define REG_UMI_MMD_ICR_MRSSTATE 0x0001 + +/* REG_UMI_NAND_TCR bits */ +/* Enable software to control CS */ +#define REG_UMI_NAND_TCR_CS_SWCTRL 0x80000000 +/* 16-bit nand wordsize if set */ +#define REG_UMI_NAND_TCR_WORD16 0x40000000 +/* Bus turnaround cycle (n) */ +#define REG_UMI_NAND_TCR_TBTA_MASK 0x00070000 +/* Write pulse width cycle (n+1) */ +#define REG_UMI_NAND_TCR_TWP_MASK 0x0000f800 +/* Write recovery cycle (n+1) */ +#define REG_UMI_NAND_TCR_TWR_MASK 0x00000600 +/* Write address setup cycle (n+1) */ +#define REG_UMI_NAND_TCR_TAS_MASK 0x00000180 +/* Output enable delay cycle (n) */ +#define REG_UMI_NAND_TCR_TOE_MASK 0x00000060 +/* Read access cycle (n+2) */ +#define REG_UMI_NAND_TCR_TRC_TLC_MASK 0x0000001f + +/* REG_UMI_NAND_RCSR bits */ +/* Status: Ready=1, Busy=0 */ +#define REG_UMI_NAND_RCSR_RDY 0x02 +/* Keep CS asserted during operation */ +#define REG_UMI_NAND_RCSR_CS_ASSERTED 0x01 + +/* REG_UMI_NAND_ECC_CSR bits */ +/* Interrupt status - read-only */ +#define REG_UMI_NAND_ECC_CSR_NANDINT 0x80000000 +/* Read: Status of ECC done, Write: clear ECC interrupt */ +#define REG_UMI_NAND_ECC_CSR_ECCINT_RAW 0x00800000 +/* Read: Status of R/B, Write: clear R/B interrupt */ +#define REG_UMI_NAND_ECC_CSR_RBINT_RAW 0x00400000 +/* 1 = Enable ECC Interrupt */ +#define REG_UMI_NAND_ECC_CSR_ECCINT_ENABLE 0x00008000 +/* 1 = Assert interrupt at rising edge of R/B_ */ +#define REG_UMI_NAND_ECC_CSR_RBINT_ENABLE 0x00004000 +/* Calculate ECC by 0=512 bytes, 1=256 bytes */ +#define REG_UMI_NAND_ECC_CSR_256BYTE 0x00000080 +/* Enable ECC in hardware */ +#define REG_UMI_NAND_ECC_CSR_ECC_ENABLE 0x00000001 + +/* REG_UMI_BCH_CTRL_STATUS bits */ +/* Shift to Indicate Number of correctable errors detected */ +#define REG_UMI_BCH_CTRL_STATUS_NB_CORR_ERROR_SHIFT 20 +/* Indicate Number of correctable errors detected */ +#define REG_UMI_BCH_CTRL_STATUS_NB_CORR_ERROR 0x00F00000 +/* Indicate Errors detected during read but uncorrectable */ +#define REG_UMI_BCH_CTRL_STATUS_UNCORR_ERR 0x00080000 +/* Indicate Errors detected during read and are correctable */ +#define REG_UMI_BCH_CTRL_STATUS_CORR_ERR 0x00040000 +/* Flag indicates BCH's ECC status of read process are valid */ +#define REG_UMI_BCH_CTRL_STATUS_RD_ECC_VALID 0x00020000 +/* Flag indicates BCH's ECC status of write process are valid */ +#define REG_UMI_BCH_CTRL_STATUS_WR_ECC_VALID 0x00010000 +/* Pause ECC calculation */ +#define REG_UMI_BCH_CTRL_STATUS_PAUSE_ECC_DEC 0x00000010 +/* Enable Interrupt */ +#define REG_UMI_BCH_CTRL_STATUS_INT_EN 0x00000004 +/* Enable ECC during read */ +#define REG_UMI_BCH_CTRL_STATUS_ECC_RD_EN 0x00000002 +/* Enable ECC during write */ +#define REG_UMI_BCH_CTRL_STATUS_ECC_WR_EN 0x00000001 +/* Mask for location */ +#define REG_UMI_BCH_ERR_LOC_MASK 0x00001FFF +/* location within a byte */ +#define REG_UMI_BCH_ERR_LOC_BYTE 0x00000007 +/* location within a word */ +#define REG_UMI_BCH_ERR_LOC_WORD 0x00000018 +/* location within a page (512 byte) */ +#define REG_UMI_BCH_ERR_LOC_PAGE 0x00001FE0 +#define REG_UMI_BCH_ERR_LOC_ADDR(index) (__REG32(HW_UMI_BASE + 0x64 + (index / 2)*4) >> ((index % 2) * 16)) +#endif -- cgit v1.2.3 From f1372055df21734f042f12ab92852e9d350be8d0 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Wed, 21 Oct 2009 14:25:27 +0200 Subject: mxc_nand: Allow flash based bbt Signed-off-by: Sascha Hauer --- arch/arm/plat-mxc/include/mach/mxc_nand.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/plat-mxc/include/mach/mxc_nand.h b/arch/arm/plat-mxc/include/mach/mxc_nand.h index 2b972df22d1..5d2d21d414e 100644 --- a/arch/arm/plat-mxc/include/mach/mxc_nand.h +++ b/arch/arm/plat-mxc/include/mach/mxc_nand.h @@ -22,6 +22,7 @@ struct mxc_nand_platform_data { int width; /* data bus width in bytes */ - int hw_ecc; /* 0 if supress hardware ECC */ + int hw_ecc:1; /* 0 if supress hardware ECC */ + int flash_bbt:1; /* set to 1 to use a flash based bbt */ }; #endif /* __ASM_ARCH_NAND_H */ -- cgit v1.2.3 From 74218fedf478323cce831b51507eebd1faf0bf7f Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 2 Nov 2009 18:12:51 +0000 Subject: mtd: s3c2410: propagate nand options from the platform data Update the nand information passed to the core from the platform data to setup the initial option value, so that flags such as NAND_SCAN_SILENT_NODEV can pass through. Signed-off-by: Ben Dooks Signed-off-by: Simtec Linux Team Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- arch/arm/plat-s3c/include/plat/nand.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm/plat-s3c/include/plat/nand.h b/arch/arm/plat-s3c/include/plat/nand.h index 18f958801e6..afd1673ad0e 100644 --- a/arch/arm/plat-s3c/include/plat/nand.h +++ b/arch/arm/plat-s3c/include/plat/nand.h @@ -17,6 +17,7 @@ * Setting this flag will allow the kernel to * look for it at boot time and also skip the NAND * scan. + * @options: Default value to set into 'struct nand_chip' options. * @nr_chips: Number of chips in this set * @nr_partitions: Number of partitions pointed to by @partitions * @name: Name of set (optional) @@ -31,6 +32,7 @@ struct s3c2410_nand_set { unsigned int disable_ecc:1; unsigned int flash_bbt:1; + unsigned int options; int nr_chips; int nr_partitions; char *name; -- cgit v1.2.3 From f611a79fe9859a30f2a7ae94b4d24f8e2dd75c91 Mon Sep 17 00:00:00 2001 From: "Mark A. Greer" Date: Mon, 12 Oct 2009 16:16:37 -0700 Subject: mtd: Add bad block table overrides to Davinci NAND driver The existing NAND infrastructure allows the default main and mirror bad block tables to be overridden in nand_default_bbt(). However, the davinci_nand driver does not support this. Add that support by adding fields to the davinci driver's platform data so platform code can pass in their own bbt's and make the davinci_nand driver honor them. Signed-off-by: Mark A. Greer Signed-off-by: Kevin Hilman CC: Sudhakar Rajashekhara Signed-off-by: David Woodhouse --- arch/arm/mach-davinci/include/mach/nand.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-davinci/include/mach/nand.h b/arch/arm/mach-davinci/include/mach/nand.h index b520c4b5678..b2ad8090bd1 100644 --- a/arch/arm/mach-davinci/include/mach/nand.h +++ b/arch/arm/mach-davinci/include/mach/nand.h @@ -79,6 +79,10 @@ struct davinci_nand_pdata { /* platform_data */ /* e.g. NAND_BUSWIDTH_16 or NAND_USE_FLASH_BBT */ unsigned options; + + /* Main and mirror bbt descriptor overrides */ + struct nand_bbt_descr *bbt_td; + struct nand_bbt_descr *bbt_md; }; #endif /* __ARCH_ARM_DAVINCI_NAND_H */ -- cgit v1.2.3