From cfb0810eab39d1162f45b73fc96f45ab1cbcbe8b Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 30 Jun 2005 11:06:49 +0100 Subject: [PATCH] ARM: Don't try to send a signal to pid0 If we receive an unrecognised abort during boot, don't try to send a signal to pid0, but instead report the current state. This leads to less confusing debug reports. Signed-off-by: Russell King --- arch/arm/kernel/traps.c | 12 ++------ arch/arm/mm/fault.c | 75 ++++++++++++++++++++++++++----------------------- 2 files changed, 42 insertions(+), 45 deletions(-) (limited to 'arch') diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 2fb0a4cfb37..df2cb06ce42 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -230,16 +230,8 @@ NORET_TYPE void die(const char *str, struct pt_regs *regs, int err) do_exit(SIGSEGV); } -void die_if_kernel(const char *str, struct pt_regs *regs, int err) -{ - if (user_mode(regs)) - return; - - die(str, regs, err); -} - -static void notify_die(const char *str, struct pt_regs *regs, siginfo_t *info, - unsigned long err, unsigned long trap) +void notify_die(const char *str, struct pt_regs *regs, struct siginfo *info, + unsigned long err, unsigned long trap) { if (user_mode(regs)) { current->thread.error_code = err; diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c index e25b4fd8412..65bfe84b6d6 100644 --- a/arch/arm/mm/fault.c +++ b/arch/arm/mm/fault.c @@ -372,49 +372,50 @@ do_bad(unsigned long addr, unsigned int fsr, struct pt_regs *regs) static struct fsr_info { int (*fn)(unsigned long addr, unsigned int fsr, struct pt_regs *regs); int sig; + int code; const char *name; } fsr_info[] = { /* * The following are the standard ARMv3 and ARMv4 aborts. ARMv5 * defines these to be "precise" aborts. */ - { do_bad, SIGSEGV, "vector exception" }, - { do_bad, SIGILL, "alignment exception" }, - { do_bad, SIGKILL, "terminal exception" }, - { do_bad, SIGILL, "alignment exception" }, - { do_bad, SIGBUS, "external abort on linefetch" }, - { do_translation_fault, SIGSEGV, "section translation fault" }, - { do_bad, SIGBUS, "external abort on linefetch" }, - { do_page_fault, SIGSEGV, "page translation fault" }, - { do_bad, SIGBUS, "external abort on non-linefetch" }, - { do_bad, SIGSEGV, "section domain fault" }, - { do_bad, SIGBUS, "external abort on non-linefetch" }, - { do_bad, SIGSEGV, "page domain fault" }, - { do_bad, SIGBUS, "external abort on translation" }, - { do_sect_fault, SIGSEGV, "section permission fault" }, - { do_bad, SIGBUS, "external abort on translation" }, - { do_page_fault, SIGSEGV, "page permission fault" }, + { do_bad, SIGSEGV, 0, "vector exception" }, + { do_bad, SIGILL, BUS_ADRALN, "alignment exception" }, + { do_bad, SIGKILL, 0, "terminal exception" }, + { do_bad, SIGILL, BUS_ADRALN, "alignment exception" }, + { do_bad, SIGBUS, 0, "external abort on linefetch" }, + { do_translation_fault, SIGSEGV, SEGV_MAPERR, "section translation fault" }, + { do_bad, SIGBUS, 0, "external abort on linefetch" }, + { do_page_fault, SIGSEGV, SEGV_MAPERR, "page translation fault" }, + { do_bad, SIGBUS, 0, "external abort on non-linefetch" }, + { do_bad, SIGSEGV, SEGV_ACCERR, "section domain fault" }, + { do_bad, SIGBUS, 0, "external abort on non-linefetch" }, + { do_bad, SIGSEGV, SEGV_ACCERR, "page domain fault" }, + { do_bad, SIGBUS, 0, "external abort on translation" }, + { do_sect_fault, SIGSEGV, SEGV_ACCERR, "section permission fault" }, + { do_bad, SIGBUS, 0, "external abort on translation" }, + { do_page_fault, SIGSEGV, SEGV_ACCERR, "page permission fault" }, /* * The following are "imprecise" aborts, which are signalled by bit * 10 of the FSR, and may not be recoverable. These are only * supported if the CPU abort handler supports bit 10. */ - { do_bad, SIGBUS, "unknown 16" }, - { do_bad, SIGBUS, "unknown 17" }, - { do_bad, SIGBUS, "unknown 18" }, - { do_bad, SIGBUS, "unknown 19" }, - { do_bad, SIGBUS, "lock abort" }, /* xscale */ - { do_bad, SIGBUS, "unknown 21" }, - { do_bad, SIGBUS, "imprecise external abort" }, /* xscale */ - { do_bad, SIGBUS, "unknown 23" }, - { do_bad, SIGBUS, "dcache parity error" }, /* xscale */ - { do_bad, SIGBUS, "unknown 25" }, - { do_bad, SIGBUS, "unknown 26" }, - { do_bad, SIGBUS, "unknown 27" }, - { do_bad, SIGBUS, "unknown 28" }, - { do_bad, SIGBUS, "unknown 29" }, - { do_bad, SIGBUS, "unknown 30" }, - { do_bad, SIGBUS, "unknown 31" } + { do_bad, SIGBUS, 0, "unknown 16" }, + { do_bad, SIGBUS, 0, "unknown 17" }, + { do_bad, SIGBUS, 0, "unknown 18" }, + { do_bad, SIGBUS, 0, "unknown 19" }, + { do_bad, SIGBUS, 0, "lock abort" }, /* xscale */ + { do_bad, SIGBUS, 0, "unknown 21" }, + { do_bad, SIGBUS, BUS_OBJERR, "imprecise external abort" }, /* xscale */ + { do_bad, SIGBUS, 0, "unknown 23" }, + { do_bad, SIGBUS, 0, "dcache parity error" }, /* xscale */ + { do_bad, SIGBUS, 0, "unknown 25" }, + { do_bad, SIGBUS, 0, "unknown 26" }, + { do_bad, SIGBUS, 0, "unknown 27" }, + { do_bad, SIGBUS, 0, "unknown 28" }, + { do_bad, SIGBUS, 0, "unknown 29" }, + { do_bad, SIGBUS, 0, "unknown 30" }, + { do_bad, SIGBUS, 0, "unknown 31" } }; void __init @@ -435,15 +436,19 @@ asmlinkage void do_DataAbort(unsigned long addr, unsigned int fsr, struct pt_regs *regs) { const struct fsr_info *inf = fsr_info + (fsr & 15) + ((fsr & (1 << 10)) >> 6); + struct siginfo info; if (!inf->fn(addr, fsr, regs)) return; printk(KERN_ALERT "Unhandled fault: %s (0x%03x) at 0x%08lx\n", inf->name, fsr, addr); - force_sig(inf->sig, current); - show_pte(current->mm, addr); - die_if_kernel("Oops", regs, 0); + + info.si_signo = inf->sig; + info.si_errno = 0; + info.si_code = inf->code; + info.si_addr = (void __user *)addr; + notify_die("", regs, &info, fsr, 0); } asmlinkage void -- cgit v1.2.3 From c19cb1df809dcf343dd1eb6fe60d53639dafcb8c Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Thu, 30 Jun 2005 17:04:13 +0100 Subject: [PATCH] ARM: 2777/1: Fix broken comment arch/arm/mm/proc-arm1020.S Patch from Catalin Marinas This patch fixes a broken comment in the proc-arm1020.S file which prevents the file compilation Signed-off-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/mm/proc-arm1020.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S index 1f325231b9e..e69f1940ab3 100644 --- a/arch/arm/mm/proc-arm1020.S +++ b/arch/arm/mm/proc-arm1020.S @@ -445,7 +445,7 @@ __arm1020_setup: /* * R * .RVI ZFRS BLDP WCAM - * .0.1 1001 ..11 0101 /* FIXME: why no V bit? */ + * .0.1 1001 ..11 0101 FIXME: why no V bit? */ .type arm1020_cr1_clear, #object .type arm1020_cr1_set, #object -- cgit v1.2.3 From c28a814f25d48f193565003223df0ae617796892 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Thu, 30 Jun 2005 17:04:14 +0100 Subject: [PATCH] ARM: 2778/1: Add -mno-thumb-interwork to CFLAGS_ABI Patch from Catalin Marinas The new EABI gcc adds -mthumb-interwork by default, even if -mabi=apcs-gnu is passed. This causes a warning for every compiled C file when -march=armv4 is used. The patch adds -mno-thumb-interwork if the option is supported. This is also useful since we don't need any ARM/Thumb interworking in the kernel Signed-off-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 8330495e244..eb933dcafba 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -56,7 +56,7 @@ tune-$(CONFIG_CPU_XSCALE) :=$(call cc-option,-mtune=xscale,-mtune=strongarm110) tune-$(CONFIG_CPU_V6) :=-mtune=strongarm # Need -Uarm for gcc < 3.x -CFLAGS_ABI :=$(call cc-option,-mapcs-32,-mabi=apcs-gnu) +CFLAGS_ABI :=$(call cc-option,-mapcs-32,-mabi=apcs-gnu) $(call cc-option,-mno-thumb-interwork,) CFLAGS +=$(CFLAGS_ABI) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm AFLAGS +=$(CFLAGS_ABI) $(arch-y) $(tune-y) -msoft-float -- cgit v1.2.3 From abaf48a05a8f097654e746af2a5afb2ab95861a1 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Thu, 30 Jun 2005 17:04:14 +0100 Subject: [PATCH] ARM: 2779/1: Fix the V bit setting for the ARM1020x CPUs Patch from Catalin Marinas This patch fixes the V bit setting for the ARM1020x processors. At reset, this bit is automatically set to the value of the HIVECSINIT input signal which just happened to be 1 but it is not mandatory. Signed-off-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/mm/proc-arm1020.S | 4 ++-- arch/arm/mm/proc-arm1020e.S | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S index e69f1940ab3..5c0ae5260d1 100644 --- a/arch/arm/mm/proc-arm1020.S +++ b/arch/arm/mm/proc-arm1020.S @@ -445,14 +445,14 @@ __arm1020_setup: /* * R * .RVI ZFRS BLDP WCAM - * .0.1 1001 ..11 0101 FIXME: why no V bit? + * .011 1001 ..11 0101 */ .type arm1020_cr1_clear, #object .type arm1020_cr1_set, #object arm1020_cr1_clear: .word 0x593f arm1020_cr1_set: - .word 0x1935 + .word 0x3935 __INITDATA diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S index 142a2c2d6f0..d69389c4d4b 100644 --- a/arch/arm/mm/proc-arm1020e.S +++ b/arch/arm/mm/proc-arm1020e.S @@ -427,14 +427,14 @@ __arm1020e_setup: /* * R * .RVI ZFRS BLDP WCAM - * .0.1 1001 ..11 0101 /* FIXME: why no V bit? */ + * .011 1001 ..11 0101 */ .type arm1020e_cr1_clear, #object .type arm1020e_cr1_set, #object arm1020e_cr1_clear: .word 0x5f3f arm1020e_cr1_set: - .word 0x1935 + .word 0x3935 __INITDATA -- cgit v1.2.3 From eaf05be039cf5adfba5b1846452ce89646110fdb Mon Sep 17 00:00:00 2001 From: Ivan Kokshaysky Date: Thu, 30 Jun 2005 20:02:18 +0400 Subject: [PATCH] alpha smp fix As usual, the reason of this breakage is quite silly: in do_entIF, we are checking for PS == 0 to see whether it was a kernel BUG() or userspace trap. It works, unless BUG() happens in interrupt - PS is not 0 in kernel mode due to non-zero IPL, and the things get messed up horribly then. In this particular case it was BUG_ON(!irqs_disabled()) triggered in run_posix_cpu_timers(), so we ended up shooting "current" with the bursts of one SIGTRAP and three SIGILLs on every timer tick. ;-) --- arch/alpha/kernel/traps.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/alpha/kernel/traps.c b/arch/alpha/kernel/traps.c index fd7bd17cc96..6f509a644bd 100644 --- a/arch/alpha/kernel/traps.c +++ b/arch/alpha/kernel/traps.c @@ -240,7 +240,7 @@ do_entIF(unsigned long type, struct pt_regs *regs) siginfo_t info; int signo, code; - if (regs->ps == 0) { + if ((regs->ps & ~IPL_MAX) == 0) { if (type == 1) { const unsigned int *data = (const unsigned int *) regs->pc; -- cgit v1.2.3 From 26705ca46bdf81113cc6729eb12b9eee2263bbfc Mon Sep 17 00:00:00 2001 From: Todd Poynor Date: Fri, 1 Jul 2005 11:27:05 +0100 Subject: [PATCH] ARM: 2781/2: PXA27x Standby mode take 2 Patch from Todd Poynor Add support for PXA27x Standby mode, a low-power mode that retains CPU and some peripheral state (the existing "sleep" mode is a power-power mode that retains less state). Activated via: echo -n standby > /sys/power/state From: David Burrage and Todd Poynor Signed-off-by: Todd Poynor Signed-off-by: Russell King --- arch/arm/mach-pxa/Makefile | 4 ++++ arch/arm/mach-pxa/pxa27x.c | 9 ++++++++- arch/arm/mach-pxa/standby.S | 32 ++++++++++++++++++++++++++++++++ 3 files changed, 44 insertions(+), 1 deletion(-) create mode 100644 arch/arm/mach-pxa/standby.S (limited to 'arch') diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index c4e6d252358..efc2f657184 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -24,3 +24,7 @@ obj-$(CONFIG_LEDS) += $(led-y) # Misc features obj-$(CONFIG_PM) += pm.o sleep.o + +ifeq ($(CONFIG_PXA27x),y) +obj-$(CONFIG_PM) += standby.o +endif diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index 893964fb965..9a791b07118 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -126,6 +126,7 @@ int pxa_cpu_pm_prepare(suspend_state_t state) { switch (state) { case PM_SUSPEND_MEM: + case PM_SUSPEND_STANDBY: return 0; default: return -EINVAL; @@ -138,7 +139,10 @@ void pxa_cpu_pm_enter(suspend_state_t state) extern void pxa_cpu_suspend(unsigned int); extern void pxa_cpu_resume(void); - CKEN = CKEN22_MEMC | CKEN9_OSTIMER; + if (state == PM_SUSPEND_STANDBY) + CKEN = CKEN22_MEMC | CKEN9_OSTIMER | CKEN16_LCD |CKEN0_PWM0; + else + CKEN = CKEN22_MEMC | CKEN9_OSTIMER; /* ensure voltage-change sequencer not initiated, which hangs */ PCFR &= ~PCFR_FVC; @@ -147,6 +151,9 @@ void pxa_cpu_pm_enter(suspend_state_t state) PEDR = 0xDF12FE1B; switch (state) { + case PM_SUSPEND_STANDBY: + pxa_cpu_standby(); + break; case PM_SUSPEND_MEM: /* set resume return address */ PSPR = virt_to_phys(pxa_cpu_resume); diff --git a/arch/arm/mach-pxa/standby.S b/arch/arm/mach-pxa/standby.S new file mode 100644 index 00000000000..8a3f27b7678 --- /dev/null +++ b/arch/arm/mach-pxa/standby.S @@ -0,0 +1,32 @@ +/* + * PXA27x standby mode + * + * Author: David Burrage + * + * 2005 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ + +#include +#include +#include +#include + +#include + + .text + +ENTRY(pxa_cpu_standby) + ldr r0, =PSSR + mov r1, #(PSSR_PH | PSSR_STS) + mov r2, #2 + mov r3, #UNCACHED_PHYS_0 @ Read mem context in. + ldr ip, [r3] + b 1f + + .align 5 +1: mcr p14, 0, r2, c7, c0, 0 @ put the system into Standby + str r1, [r0] @ make sure PSSR_PH/STS are clear + mov pc, lr -- cgit v1.2.3 From e695f60454f665604fe1b6e473f25b098203965a Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 1 Jul 2005 11:27:06 +0100 Subject: [PATCH] ARM: 2783/1: Remove omnimeter_defconfig as there is no kernel support Patch from Ben Dooks The omnimeter_defconfig does not define any machines and seems to have no other support in the current kernel. This patch removes the config file, as this is the only thing currently mentioning the ominmeter. Signed-off-by: Ben Dooks Signed-off-by: Russell King --- arch/arm/configs/omnimeter_defconfig | 803 ----------------------------------- 1 file changed, 803 deletions(-) delete mode 100644 arch/arm/configs/omnimeter_defconfig (limited to 'arch') diff --git a/arch/arm/configs/omnimeter_defconfig b/arch/arm/configs/omnimeter_defconfig deleted file mode 100644 index 78fdb4a428b..00000000000 --- a/arch/arm/configs/omnimeter_defconfig +++ /dev/null @@ -1,803 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc1-bk2 -# Sun Mar 27 21:31:45 2005 -# -CONFIG_ARM=y -CONFIG_MMU=y -CONFIG_UID16=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_IOMAP=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_BROKEN_ON_SMP=y - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y -# CONFIG_IKCONFIG is not set -# CONFIG_EMBEDDED is not set -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# -CONFIG_MODULES=y -# CONFIG_MODULE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y - -# -# System Type -# -# CONFIG_ARCH_CLPS7500 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_CAMELOT is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_IOP3XX is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_IXP2000 is not set -# CONFIG_ARCH_L7200 is not set -# CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_RPC is not set -CONFIG_ARCH_SA1100=y -# CONFIG_ARCH_S3C2410 is not set -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_LH7A40X is not set -# CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_H720X is not set - -# -# SA11x0 Implementations -# -# CONFIG_SA1100_ASSABET is not set -# CONFIG_SA1100_CERF is not set -# CONFIG_SA1100_COLLIE is not set -# CONFIG_SA1100_H3100 is not set -# CONFIG_SA1100_H3600 is not set -# CONFIG_SA1100_H3800 is not set -# CONFIG_SA1100_BADGE4 is not set -# CONFIG_SA1100_JORNADA720 is not set -# CONFIG_SA1100_HACKKIT is not set -# CONFIG_SA1100_LART is not set -# CONFIG_SA1100_PLEB is not set -# CONFIG_SA1100_SHANNON is not set -# CONFIG_SA1100_SIMPAD is not set -# CONFIG_SA1100_SSP is not set - -# -# Processor Type -# -CONFIG_CPU_32=y -CONFIG_CPU_SA1100=y -CONFIG_CPU_32v4=y -CONFIG_CPU_ABRT_EV4=y -CONFIG_CPU_CACHE_V4WB=y -CONFIG_CPU_CACHE_VIVT=y -CONFIG_CPU_TLB_V4WB=y -CONFIG_CPU_MINICACHE=y - -# -# Processor Features -# - -# -# Bus support -# -CONFIG_ISA=y - -# -# PCCARD (PCMCIA/CardBus) support -# -CONFIG_PCCARD=y -# CONFIG_PCMCIA_DEBUG is not set -CONFIG_PCMCIA=y - -# -# PC-card bridges -# -CONFIG_I82365=y -# CONFIG_TCIC is not set -CONFIG_PCMCIA_SA1100=y -CONFIG_PCCARD_NONSTATIC=y - -# -# Kernel Features -# -# CONFIG_PREEMPT is not set -CONFIG_DISCONTIGMEM=y -# CONFIG_LEDS is not set -CONFIG_ALIGNMENT_TRAP=y - -# -# Boot options -# -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="keepinitrd mem=16M root=/dev/ram ramdisk=8192 initrd=0xd0000000,4M" -# CONFIG_XIP_KERNEL is not set - -# -# CPU Frequency scaling -# -# CONFIG_CPU_FREQ is not set - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# -# CONFIG_FPE_NWFPE is not set -# CONFIG_FPE_FASTFPE is not set - -# -# Userspace binary formats -# -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_AOUT=y -# CONFIG_BINFMT_MISC is not set -# CONFIG_ARTHUR is not set - -# -# Power management options -# -# CONFIG_PM is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNP is not set - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_DEV_XD is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=m -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -CONFIG_BLK_DEV_NBD=m -# CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -# CONFIG_BLK_DEV_IDECS is not set -# CONFIG_BLK_DEV_IDECD is not set -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_IDE_TASK_IOCTL is not set - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -# CONFIG_IDE_ARM is not set -# CONFIG_IDE_CHIPSETS is not set -# CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_IDEDMA_AUTO is not set -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI device support -# -# CONFIG_SCSI is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -# CONFIG_NETLINK_DEV is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set - -# -# IP: Virtual Server Configuration -# -# CONFIG_IP_VS is not set -# CONFIG_IPV6 is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set - -# -# IP: Netfilter Configuration -# -# CONFIG_IP_NF_CONNTRACK is not set -# CONFIG_IP_NF_CONNTRACK_MARK is not set -# CONFIG_IP_NF_QUEUE is not set -# CONFIG_IP_NF_IPTABLES is not set -# CONFIG_IP_NF_ARPTABLES is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -# CONFIG_MII is not set -# CONFIG_NET_VENDOR_3COM is not set -# CONFIG_LANCE is not set -# CONFIG_NET_VENDOR_SMC is not set -# CONFIG_SMC91X is not set -# CONFIG_NET_VENDOR_RACAL is not set -# CONFIG_AT1700 is not set -# CONFIG_DEPCA is not set -# CONFIG_HP100 is not set -# CONFIG_NET_ISA is not set -# CONFIG_NET_PCI is not set -# CONFIG_NET_POCKET is not set - -# -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -CONFIG_NET_RADIO=y - -# -# Obsolete Wireless cards support (pre-802.11) -# -# CONFIG_STRIP is not set -# CONFIG_ARLAN is not set -# CONFIG_WAVELAN is not set -CONFIG_PCMCIA_WAVELAN=y -# CONFIG_PCMCIA_NETWAVE is not set - -# -# Wireless 802.11 Frequency Hopping cards support -# -# CONFIG_PCMCIA_RAYCS is not set - -# -# Wireless 802.11b ISA/PCI cards support -# -# CONFIG_HERMES is not set -# CONFIG_ATMEL is not set - -# -# Wireless 802.11b Pcmcia/Cardbus cards support -# -CONFIG_AIRO_CS=y -CONFIG_PCMCIA_WL3501=y -CONFIG_NET_WIRELESS=y - -# -# PCMCIA network device support -# -CONFIG_NET_PCMCIA=y -CONFIG_PCMCIA_3C589=y -# CONFIG_PCMCIA_3C574 is not set -# CONFIG_PCMCIA_FMVJ18X is not set -CONFIG_PCMCIA_PCNET=y -# CONFIG_PCMCIA_NMCLAN is not set -# CONFIG_PCMCIA_SMC91C92 is not set -# CONFIG_PCMCIA_XIRC2PS is not set -# CONFIG_PCMCIA_AXNET is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -CONFIG_KEYBOARD_ATKBD=y -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -CONFIG_INPUT_MOUSE=y -CONFIG_MOUSE_PS2=y -# CONFIG_MOUSE_SERIAL is not set -# CONFIG_MOUSE_INPORT is not set -# CONFIG_MOUSE_LOGIBM is not set -# CONFIG_MOUSE_PC110PAD is not set -# CONFIG_MOUSE_VSXXXAA is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -CONFIG_SERIO_SERPORT=y -CONFIG_SERIO_LIBPS2=y -# CONFIG_SERIO_RAW is not set -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_SA1100=y -CONFIG_SERIAL_SA1100_CONSOLE=y -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_NVRAM is not set -# CONFIG_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_DRM is not set - -# -# PCMCIA character devices -# -# CONFIG_SYNCLINK_CS is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# Misc devices -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -CONFIG_FB=y -CONFIG_FB_CFB_FILLRECT=y -CONFIG_FB_CFB_COPYAREA=y -CONFIG_FB_CFB_IMAGEBLIT=y -CONFIG_FB_SOFT_CURSOR=y -# CONFIG_FB_MODE_HELPERS is not set -# CONFIG_FB_TILEBLITTING is not set -CONFIG_FB_SA1100=y -# CONFIG_FB_VIRTUAL is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -# CONFIG_MDA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_FONTS=y -CONFIG_FONT_8x8=y -# CONFIG_FONT_8x16 is not set -# CONFIG_FONT_6x11 is not set -# CONFIG_FONT_PEARL_8x8 is not set -# CONFIG_FONT_ACORN_8x8 is not set -# CONFIG_FONT_MINI_4x6 is not set -# CONFIG_FONT_SUN8x16 is not set -# CONFIG_FONT_SUN12x22 is not set - -# -# Logo configuration -# -# CONFIG_LOGO is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -# CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USB is not set - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT3_FS is not set -# CONFIG_JBD is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set - -# -# XFS support -# -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=y -CONFIG_MSDOS_FS=y -# CONFIG_VFAT_FS is not set -CONFIG_FAT_DEFAULT_CODEPAGE=437 -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set -# CONFIG_DEVPTS_FS_XATTR is not set -# CONFIG_TMPFS is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_LOCKD=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -# CONFIG_NLS_CODEPAGE_437 is not set -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set -# CONFIG_NLS_ISO8859_1 is not set -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_DEBUG_BUGVERBOSE=y -CONFIG_FRAME_POINTER=y -# CONFIG_DEBUG_USER is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set - -# -# Hardware crypto devices -# - -# -# Library routines -# -# CONFIG_CRC_CCITT is not set -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set -- cgit v1.2.3 From c77b042700ae1fc4d661d7d62787899e755160d5 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 1 Jul 2005 11:56:55 +0100 Subject: [PATCH] ARM: Make the magic values in head.S more obvious Make the magic address values in head.S more obvious as to where they came from. Wrap all debug code in CONFIG_DEBUG_LL. Signed-off-by: Russell King --- arch/arm/kernel/head.S | 20 ++++++++------------ 1 file changed, 8 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index bd4823c7464..1155cf07c87 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -344,9 +344,9 @@ __create_page_tables: str r6, [r0] #endif +#ifdef CONFIG_DEBUG_LL bic r7, r7, #0x0c @ turn off cacheable @ and bufferable bits -#ifdef CONFIG_DEBUG_LL /* * Map in IO space for serial debugging. * This allows debug messages to be output @@ -372,27 +372,23 @@ __create_page_tables: teq r1, #MACH_TYPE_NETWINDER teqne r1, #MACH_TYPE_CATS bne 1f - add r0, r4, #0x3fc0 @ ff000000 - mov r3, #0x7c000000 - orr r3, r3, r7 - str r3, [r0], #4 - add r3, r3, #1 << 20 - str r3, [r0], #4 + add r0, r4, #0xff000000 >> 18 + orr r3, r7, #0x7c000000 + str r3, [r0] 1: #endif -#endif #ifdef CONFIG_ARCH_RPC /* * Map in screen at 0x02000000 & SCREEN2_BASE * Similar reasons here - for debug. This is * only for Acorn RiscPC architectures. */ - add r0, r4, #0x80 @ 02000000 - mov r3, #0x02000000 - orr r3, r3, r7 + add r0, r4, #0x02000000 >> 18 + orr r3, r7, #0x02000000 str r3, [r0] - add r0, r4, #0x3600 @ d8000000 + add r0, r4, #0xd8000000 >> 18 str r3, [r0] +#endif #endif mov pc, lr .ltorg -- cgit v1.2.3 From db5795547694cf68388aaf8f59723e850f7466f6 Mon Sep 17 00:00:00 2001 From: Nishanth Aravamudan Date: Fri, 1 Jul 2005 12:11:51 +0100 Subject: [PATCH] ARM: replace schedule_timeout() with msleep() Use msleep() instead of schedule_timeout() to guarantee the task delays as expected. Neither signals nor wait-queue events are important at this point in the code, I believe. Signed-off-by: Nishanth Aravamudan Signed-off-by: Domen Puncer Signed-off-by: Russell King --- arch/arm/mach-sa1100/cpu-sa1110.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-sa1100/cpu-sa1110.c b/arch/arm/mach-sa1100/cpu-sa1110.c index 8d2a89a2ea0..04c94ab6c18 100644 --- a/arch/arm/mach-sa1100/cpu-sa1110.c +++ b/arch/arm/mach-sa1100/cpu-sa1110.c @@ -271,8 +271,7 @@ static int sa1110_target(struct cpufreq_policy *policy, */ sdram_set_refresh(2); if (!irqs_disabled()) { - set_current_state(TASK_UNINTERRUPTIBLE); - schedule_timeout(20 * HZ / 1000); + msleep(20); } else { mdelay(20); } -- cgit v1.2.3 From 4a89a04f1ee21a7c1f4413f1ad7dcfac50ff9b63 Mon Sep 17 00:00:00 2001 From: Ivan Kokshaysky Date: Fri, 1 Jul 2005 16:46:26 +0400 Subject: [PATCH] alpha smp fix (part #2) This fixes the bug that caused BUG_ON(!irqs_disabled()) to trigger in run_posix_cpu_timers() on alpha/smp. We didn't disable interrupts properly before calling smp_percpu_timer_interrupt(). We *do* disable interrupts everywhere except this unfortunate smp_percpu_timer_interrupt(). Fixed thus. Signed-off-by: Linus Torvalds --- arch/alpha/kernel/irq_alpha.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/alpha/kernel/irq_alpha.c b/arch/alpha/kernel/irq_alpha.c index e6ded33c6e2..9d34ce26e5e 100644 --- a/arch/alpha/kernel/irq_alpha.c +++ b/arch/alpha/kernel/irq_alpha.c @@ -55,6 +55,8 @@ do_entInt(unsigned long type, unsigned long vector, #ifdef CONFIG_SMP { long cpu; + + local_irq_disable(); smp_percpu_timer_interrupt(regs); cpu = smp_processor_id(); if (cpu != boot_cpuid) { -- cgit v1.2.3 From 299de0343c7d18448a69c635378342e9214b14af Mon Sep 17 00:00:00 2001 From: Ivan Kokshaysky Date: Wed, 15 Jun 2005 18:59:27 +0400 Subject: [PATCH] PCI: pci_assign_unassigned_resources() on x86 - Add sanity check for io[port,mem]_resource in setup-bus.c. These resources look like "free" as they have no parents, but obviously we must not touch them. - In i386.c:pci_allocate_bus_resources(), if a bridge resource cannot be allocated for some reason, then clear its flags. This prevents any child allocations in this range, so the setup-bus code will work with a clean resource sub-tree. - i386.c:pcibios_enable_resources() doesn't enable bridges, as it checks only resources 0-5, which looks like a clear bug to me. I suspect it might break hotplug as well in some cases. From: Ivan Kokshaysky Signed-off-by: Greg Kroah-Hartman --- arch/i386/pci/common.c | 1 + arch/i386/pci/i386.c | 11 ++++++++--- 2 files changed, 9 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/i386/pci/common.c b/arch/i386/pci/common.c index 87325263cd4..70bcd53451f 100644 --- a/arch/i386/pci/common.c +++ b/arch/i386/pci/common.c @@ -165,6 +165,7 @@ static int __init pcibios_init(void) if ((pci_probe & PCI_BIOS_SORT) && !(pci_probe & PCI_NO_SORT)) pcibios_sort(); #endif + pci_assign_unassigned_resources(); return 0; } diff --git a/arch/i386/pci/i386.c b/arch/i386/pci/i386.c index c205ea7e233..93a364c8215 100644 --- a/arch/i386/pci/i386.c +++ b/arch/i386/pci/i386.c @@ -106,11 +106,16 @@ static void __init pcibios_allocate_bus_resources(struct list_head *bus_list) if ((dev = bus->self)) { for (idx = PCI_BRIDGE_RESOURCES; idx < PCI_NUM_RESOURCES; idx++) { r = &dev->resource[idx]; - if (!r->start) + if (!r->flags) continue; pr = pci_find_parent_resource(dev, r); - if (!pr || request_resource(pr, r) < 0) + if (!r->start || !pr || request_resource(pr, r) < 0) { printk(KERN_ERR "PCI: Cannot allocate resource region %d of bridge %s\n", idx, pci_name(dev)); + /* Something is wrong with the region. + Invalidate the resource to prevent child + resource allocations in this range. */ + r->flags = 0; + } } } pcibios_allocate_bus_resources(&bus->children); @@ -227,7 +232,7 @@ int pcibios_enable_resources(struct pci_dev *dev, int mask) pci_read_config_word(dev, PCI_COMMAND, &cmd); old_cmd = cmd; - for(idx=0; idx<6; idx++) { + for(idx = 0; idx < PCI_NUM_RESOURCES; idx++) { /* Only set up the requested stuff */ if (!(mask & (1< Date: Thu, 30 Jun 2005 02:18:12 -0700 Subject: [PATCH] PCI: clean up dynamic pci id logic The dynamic pci id logic has been bothering me for a while, and now that I started to look into how to move some of this to the driver core, I thought it was time to clean it all up. It ends up making the code smaller, and easier to follow, and fixes a few bugs at the same time (dynamic ids were not being matched everywhere, and so could be missed on some call paths for new devices, semaphore not needed to be grabbed when adding a new id and calling the driver core, etc.) I also renamed the function pci_match_device() to pci_match_id() as that's what it really does. Signed-off-by: Greg Kroah-Hartman --- arch/i386/kernel/cpu/cpufreq/gx-suspmod.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/i386/kernel/cpu/cpufreq/gx-suspmod.c b/arch/i386/kernel/cpu/cpufreq/gx-suspmod.c index 1a49adb1f4a..e86ea486c31 100644 --- a/arch/i386/kernel/cpu/cpufreq/gx-suspmod.c +++ b/arch/i386/kernel/cpu/cpufreq/gx-suspmod.c @@ -190,7 +190,7 @@ static __init struct pci_dev *gx_detect_chipset(void) /* detect which companion chip is used */ while ((gx_pci = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, gx_pci)) != NULL) { - if ((pci_match_device (gx_chipset_tbl, gx_pci)) != NULL) { + if ((pci_match_id(gx_chipset_tbl, gx_pci)) != NULL) { return gx_pci; } } -- cgit v1.2.3 From e9dea0c65d2de6981356c055781fb99d7191b14e Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 3 Jul 2005 17:38:58 +0100 Subject: [PATCH] ARM: Remove machine description macros Remove the pointless machine description macros, favouring C99 initialisers instead. Signed-off-by: Russell King --- arch/arm/mach-aaec2000/aaed2000.c | 10 +++--- arch/arm/mach-clps711x/autcpu12.c | 12 ++++--- arch/arm/mach-clps711x/cdb89712.c | 12 ++++--- arch/arm/mach-clps711x/ceiva.c | 12 ++++--- arch/arm/mach-clps711x/clep7312.c | 14 ++++---- arch/arm/mach-clps711x/edb7211-arch.c | 14 ++++---- arch/arm/mach-clps711x/fortunet.c | 14 ++++---- arch/arm/mach-clps711x/p720t.c | 14 ++++---- arch/arm/mach-clps7500/core.c | 14 ++++---- arch/arm/mach-ebsa110/core.c | 18 +++++----- arch/arm/mach-epxa10db/arch.c | 10 +++--- arch/arm/mach-footbridge/cats-hw.c | 16 +++++---- arch/arm/mach-footbridge/co285.c | 12 ++++--- arch/arm/mach-footbridge/ebsa285.c | 15 ++++---- arch/arm/mach-footbridge/netwinder-hw.c | 21 ++++++----- arch/arm/mach-footbridge/personal.c | 12 ++++--- arch/arm/mach-h720x/h7201-eval.c | 14 ++++---- arch/arm/mach-h720x/h7202-eval.c | 16 +++++---- arch/arm/mach-imx/mx1ads.c | 14 ++++---- arch/arm/mach-integrator/integrator_ap.c | 14 ++++---- arch/arm/mach-integrator/integrator_cp.c | 14 ++++---- arch/arm/mach-iop3xx/iop321-setup.c | 28 ++++++++------- arch/arm/mach-iop3xx/iop331-setup.c | 30 ++++++++-------- arch/arm/mach-ixp2000/enp2611.c | 14 ++++---- arch/arm/mach-ixp2000/ixdp2400.c | 14 ++++---- arch/arm/mach-ixp2000/ixdp2800.c | 14 ++++---- arch/arm/mach-ixp2000/ixdp2x01.c | 28 ++++++++------- arch/arm/mach-ixp4xx/coyote-setup.c | 30 ++++++++-------- arch/arm/mach-ixp4xx/gtwx5715-setup.c | 17 ++++----- arch/arm/mach-ixp4xx/ixdp425-setup.c | 60 +++++++++++++++++--------------- arch/arm/mach-l7200/core.c | 10 +++--- arch/arm/mach-lh7a40x/arch-kev7a400.c | 12 ++++--- arch/arm/mach-lh7a40x/arch-lpd7a40x.c | 28 ++++++++------- arch/arm/mach-omap/board-generic.c | 14 ++++---- arch/arm/mach-omap/board-h2.c | 14 ++++---- arch/arm/mach-omap/board-h3.c | 14 ++++---- arch/arm/mach-omap/board-innovator.c | 14 ++++---- arch/arm/mach-omap/board-netstar.c | 16 +++++---- arch/arm/mach-omap/board-osk.c | 14 ++++---- arch/arm/mach-omap/board-perseus2.c | 14 ++++---- arch/arm/mach-omap/board-voiceblue.c | 16 +++++---- arch/arm/mach-omap/usb.c | 1 - arch/arm/mach-pxa/corgi.c | 42 ++++++++++++---------- arch/arm/mach-pxa/idp.c | 12 ++++--- arch/arm/mach-pxa/lubbock.c | 12 ++++--- arch/arm/mach-pxa/mainstone.c | 12 ++++--- arch/arm/mach-pxa/poodle.c | 14 ++++---- arch/arm/mach-rpc/riscpc.c | 16 +++++---- arch/arm/mach-s3c2410/mach-bast.c | 9 ++--- arch/arm/mach-s3c2410/mach-h1940.c | 12 ++++--- arch/arm/mach-s3c2410/mach-n30.c | 9 ++--- arch/arm/mach-s3c2410/mach-nexcoder.c | 8 +++-- arch/arm/mach-s3c2410/mach-otom.c | 8 +++-- arch/arm/mach-s3c2410/mach-rx3715.c | 14 ++++---- arch/arm/mach-s3c2410/mach-smdk2410.c | 12 ++++--- arch/arm/mach-s3c2410/mach-smdk2440.c | 8 +++-- arch/arm/mach-s3c2410/mach-vr1000.c | 8 +++-- arch/arm/mach-sa1100/assabet.c | 12 ++++--- arch/arm/mach-sa1100/badge4.c | 10 +++--- arch/arm/mach-sa1100/cerf.c | 10 +++--- arch/arm/mach-sa1100/collie.c | 8 +++-- arch/arm/mach-sa1100/h3600.c | 30 +++++++++------- arch/arm/mach-sa1100/hackkit.c | 10 +++--- arch/arm/mach-sa1100/jornada720.c | 10 +++--- arch/arm/mach-sa1100/lart.c | 10 +++--- arch/arm/mach-sa1100/pleb.c | 8 +++-- arch/arm/mach-sa1100/shannon.c | 10 +++--- arch/arm/mach-sa1100/simpad.c | 12 ++++--- arch/arm/mach-shark/core.c | 12 ++++--- arch/arm/mach-versatile/versatile_ab.c | 14 ++++---- arch/arm/mach-versatile/versatile_pb.c | 14 ++++---- 71 files changed, 607 insertions(+), 453 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-aaec2000/aaed2000.c b/arch/arm/mach-aaec2000/aaed2000.c index 5417ca3f462..c9d89988664 100644 --- a/arch/arm/mach-aaec2000/aaed2000.c +++ b/arch/arm/mach-aaec2000/aaed2000.c @@ -40,9 +40,11 @@ static void __init aaed2000_map_io(void) } MACHINE_START(AAED2000, "Agilent AAED-2000 Development Platform") - MAINTAINER("Nicolas Bellido Y Ortega") - BOOT_MEM(0xf0000000, PIO_BASE, VIO_BASE) - MAPIO(aaed2000_map_io) - INITIRQ(aaed2000_init_irq) + /* Maintainer: Nicolas Bellido Y Ortega */ + .phys_ram = 0xf0000000, + .phys_io = PIO_BASE, + .io_pg_offst = ((VIO_BASE) >> 18) & 0xfffc, + .map_io = aaed2000_map_io, + .init_irq = aaed2000_init_irq, .timer = &aaec2000_timer, MACHINE_END diff --git a/arch/arm/mach-clps711x/autcpu12.c b/arch/arm/mach-clps711x/autcpu12.c index c106704a2c3..dc73feb1ffb 100644 --- a/arch/arm/mach-clps711x/autcpu12.c +++ b/arch/arm/mach-clps711x/autcpu12.c @@ -59,11 +59,13 @@ void __init autcpu12_map_io(void) } MACHINE_START(AUTCPU12, "autronix autcpu12") - MAINTAINER("Thomas Gleixner") - BOOT_MEM(0xc0000000, 0x80000000, 0xff000000) - BOOT_PARAMS(0xc0020000) - MAPIO(autcpu12_map_io) - INITIRQ(clps711x_init_irq) + /* Maintainer: Thomas Gleixner */ + .phys_ram = 0xc0000000, + .phys_io = 0x80000000, + .io_pg_offst = ((0xff000000) >> 18) & 0xfffc, + .boot_params = 0xc0020000, + .map_io = autcpu12_map_io, + .init_irq = clps711x_init_irq, .timer = &clps711x_timer, MACHINE_END diff --git a/arch/arm/mach-clps711x/cdb89712.c b/arch/arm/mach-clps711x/cdb89712.c index 7664f9cf83b..a46c82cd271 100644 --- a/arch/arm/mach-clps711x/cdb89712.c +++ b/arch/arm/mach-clps711x/cdb89712.c @@ -49,10 +49,12 @@ static void __init cdb89712_map_io(void) } MACHINE_START(CDB89712, "Cirrus-CDB89712") - MAINTAINER("Ray Lehtiniemi") - BOOT_MEM(0xc0000000, 0x80000000, 0xff000000) - BOOT_PARAMS(0xc0000100) - MAPIO(cdb89712_map_io) - INITIRQ(clps711x_init_irq) + /* Maintainer: Ray Lehtiniemi */ + .phys_ram = 0xc0000000, + .phys_io = 0x80000000, + .io_pg_offst = ((0xff000000) >> 18) & 0xfffc, + .boot_params = 0xc0000100, + .map_io = cdb89712_map_io, + .init_irq = clps711x_init_irq, .timer = &clps711x_timer, MACHINE_END diff --git a/arch/arm/mach-clps711x/ceiva.c b/arch/arm/mach-clps711x/ceiva.c index e4093be3c4c..780d9180598 100644 --- a/arch/arm/mach-clps711x/ceiva.c +++ b/arch/arm/mach-clps711x/ceiva.c @@ -53,10 +53,12 @@ static void __init ceiva_map_io(void) MACHINE_START(CEIVA, "CEIVA/Polaroid Photo MAX Digital Picture Frame") - MAINTAINER("Rob Scott") - BOOT_MEM(0xc0000000, 0x80000000, 0xff000000) - BOOT_PARAMS(0xc0000100) - MAPIO(ceiva_map_io) - INITIRQ(clps711x_init_irq) + /* Maintainer: Rob Scott */ + .phys_ram = 0xc0000000, + .phys_io = 0x80000000, + .io_pg_offst = ((0xff000000) >> 18) & 0xfffc, + .boot_params = 0xc0000100, + .map_io = ceiva_map_io, + .init_irq = clps711x_init_irq, .timer = &clps711x_timer, MACHINE_END diff --git a/arch/arm/mach-clps711x/clep7312.c b/arch/arm/mach-clps711x/clep7312.c index 9ca21cb481b..c83f3fd68fc 100644 --- a/arch/arm/mach-clps711x/clep7312.c +++ b/arch/arm/mach-clps711x/clep7312.c @@ -37,12 +37,14 @@ fixup_clep7312(struct machine_desc *desc, struct tag *tags, MACHINE_START(CLEP7212, "Cirrus Logic 7212/7312") - MAINTAINER("Nobody") - BOOT_MEM(0xc0000000, 0x80000000, 0xff000000) - BOOT_PARAMS(0xc0000100) - FIXUP(fixup_clep7312) - MAPIO(clps711x_map_io) - INITIRQ(clps711x_init_irq) + /* Maintainer: Nobody */ + .phys_ram = 0xc0000000, + .phys_io = 0x80000000, + .io_pg_offst = ((0xff000000) >> 18) & 0xfffc, + .boot_params = 0xc0000100, + .fixup = fixup_clep7312, + .map_io = clps711x_map_io, + .init_irq = clps711x_init_irq, .timer = &clps711x_timer, MACHINE_END diff --git a/arch/arm/mach-clps711x/edb7211-arch.c b/arch/arm/mach-clps711x/edb7211-arch.c index c6c46324a2e..255c98b63e1 100644 --- a/arch/arm/mach-clps711x/edb7211-arch.c +++ b/arch/arm/mach-clps711x/edb7211-arch.c @@ -51,11 +51,13 @@ fixup_edb7211(struct machine_desc *desc, struct tag *tags, } MACHINE_START(EDB7211, "CL-EDB7211 (EP7211 eval board)") - MAINTAINER("Jon McClintock") - BOOT_MEM(0xc0000000, 0x80000000, 0xff000000) - BOOT_PARAMS(0xc0020100) /* 0xc0000000 - 0xc001ffff can be video RAM */ - FIXUP(fixup_edb7211) - MAPIO(edb7211_map_io) - INITIRQ(clps711x_init_irq) + /* Maintainer: Jon McClintock */ + .phys_ram = 0xc0000000, + .phys_io = 0x80000000, + .io_pg_offst = ((0xff000000) >> 18) & 0xfffc, + .boot_params = 0xc0020100, /* 0xc0000000 - 0xc001ffff can be video RAM */ + .fixup = fixup_edb7211, + .map_io = edb7211_map_io, + .init_irq = clps711x_init_irq, .timer = &clps711x_timer, MACHINE_END diff --git a/arch/arm/mach-clps711x/fortunet.c b/arch/arm/mach-clps711x/fortunet.c index c1c5b8e0154..f83a59761e0 100644 --- a/arch/arm/mach-clps711x/fortunet.c +++ b/arch/arm/mach-clps711x/fortunet.c @@ -75,11 +75,13 @@ fortunet_fixup(struct machine_desc *desc, struct tag *tags, } MACHINE_START(FORTUNET, "ARM-FortuNet") - MAINTAINER("FortuNet Inc.") - BOOT_MEM(0xc0000000, 0x80000000, 0xf0000000) - BOOT_PARAMS(0x00000000) - FIXUP(fortunet_fixup) - MAPIO(clps711x_map_io) - INITIRQ(clps711x_init_irq) + /* Maintainer: FortuNet Inc. */ + .phys_ram = 0xc0000000, + .phys_io = 0x80000000, + .io_pg_offst = ((0xf0000000) >> 18) & 0xfffc, + .boot_params = 0x00000000, + .fixup = fortunet_fixup, + .map_io = clps711x_map_io, + .init_irq = clps711x_init_irq, .timer = &clps711x_timer, MACHINE_END diff --git a/arch/arm/mach-clps711x/p720t.c b/arch/arm/mach-clps711x/p720t.c index 29269df054f..5bdb90edf99 100644 --- a/arch/arm/mach-clps711x/p720t.c +++ b/arch/arm/mach-clps711x/p720t.c @@ -79,12 +79,14 @@ static void __init p720t_map_io(void) } MACHINE_START(P720T, "ARM-Prospector720T") - MAINTAINER("ARM Ltd/Deep Blue Solutions Ltd") - BOOT_MEM(0xc0000000, 0x80000000, 0xff000000) - BOOT_PARAMS(0xc0000100) - FIXUP(fixup_p720t) - MAPIO(p720t_map_io) - INITIRQ(clps711x_init_irq) + /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ + .phys_ram = 0xc0000000, + .phys_io = 0x80000000, + .io_pg_offst = ((0xff000000) >> 18) & 0xfffc, + .boot_params = 0xc0000100, + .fixup = fixup_p720t, + .map_io = p720t_map_io, + .init_irq = clps711x_init_irq, .timer = &clps711x_timer, MACHINE_END diff --git a/arch/arm/mach-clps7500/core.c b/arch/arm/mach-clps7500/core.c index 90e85f434f6..112f1d68fb2 100644 --- a/arch/arm/mach-clps7500/core.c +++ b/arch/arm/mach-clps7500/core.c @@ -366,11 +366,13 @@ static void __init clps7500_init(void) } MACHINE_START(CLPS7500, "CL-PS7500") - MAINTAINER("Philip Blundell") - BOOT_MEM(0x10000000, 0x03000000, 0xe0000000) - MAPIO(clps7500_map_io) - INITIRQ(clps7500_init_irq) - .init_machine = clps7500_init, - .timer = &clps7500_timer, + /* Maintainer: Philip Blundell */ + .phys_ram = 0x10000000, + .phys_io = 0x03000000, + .io_pg_offst = ((0xe0000000) >> 18) & 0xfffc, + .map_io = clps7500_map_io, + .init_irq = clps7500_init_irq, + .init_machine = clps7500_init, + .timer = &clps7500_timer, MACHINE_END diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c index 86ffdbb5626..23c4da10101 100644 --- a/arch/arm/mach-ebsa110/core.c +++ b/arch/arm/mach-ebsa110/core.c @@ -233,13 +233,15 @@ static int __init ebsa110_init(void) arch_initcall(ebsa110_init); MACHINE_START(EBSA110, "EBSA110") - MAINTAINER("Russell King") - BOOT_MEM(0x00000000, 0xe0000000, 0xe0000000) - BOOT_PARAMS(0x00000400) - DISABLE_PARPORT(0) - DISABLE_PARPORT(2) - SOFT_REBOOT - MAPIO(ebsa110_map_io) - INITIRQ(ebsa110_init_irq) + /* Maintainer: Russell King */ + .phys_ram = 0x00000000, + .phys_io = 0xe0000000, + .io_pg_offst = ((0xe0000000) >> 18) & 0xfffc, + .boot_params = 0x00000400, + .reserve_lp0 = 1, + .reserve_lp2 = 1, + .soft_reboot = 1, + .map_io = ebsa110_map_io, + .init_irq = ebsa110_init_irq, .timer = &ebsa110_timer, MACHINE_END diff --git a/arch/arm/mach-epxa10db/arch.c b/arch/arm/mach-epxa10db/arch.c index 1b40340e8a2..7daa021676d 100644 --- a/arch/arm/mach-epxa10db/arch.c +++ b/arch/arm/mach-epxa10db/arch.c @@ -63,10 +63,12 @@ extern void epxa10db_init_irq(void); extern struct sys_timer epxa10db_timer; MACHINE_START(CAMELOT, "Altera Epxa10db") - MAINTAINER("Altera Corporation") - BOOT_MEM(0x00000000, 0x7fffc000, 0xffffc000) - MAPIO(epxa10db_map_io) - INITIRQ(epxa10db_init_irq) + /* Maintainer: Altera Corporation */ + .phys_ram = 0x00000000, + .phys_io = 0x7fffc000, + .io_pg_offst = ((0xffffc000) >> 18) & 0xfffc, + .map_io = epxa10db_map_io, + .init_irq = epxa10db_init_irq, .timer = &epxa10db_timer, MACHINE_END diff --git a/arch/arm/mach-footbridge/cats-hw.c b/arch/arm/mach-footbridge/cats-hw.c index d1ced86c379..49b898af003 100644 --- a/arch/arm/mach-footbridge/cats-hw.c +++ b/arch/arm/mach-footbridge/cats-hw.c @@ -84,12 +84,14 @@ fixup_cats(struct machine_desc *desc, struct tag *tags, } MACHINE_START(CATS, "Chalice-CATS") - MAINTAINER("Philip Blundell") - BOOT_MEM(0x00000000, DC21285_ARMCSR_BASE, 0xfe000000) - BOOT_PARAMS(0x00000100) - SOFT_REBOOT - FIXUP(fixup_cats) - MAPIO(footbridge_map_io) - INITIRQ(footbridge_init_irq) + /* Maintainer: Philip Blundell */ + .phys_ram = 0x00000000, + .phys_io = DC21285_ARMCSR_BASE, + .io_pg_offst = ((0xfe000000) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .soft_reboot = 1, + .fixup = fixup_cats, + .map_io = footbridge_map_io, + .init_irq = footbridge_init_irq, .timer = &isa_timer, MACHINE_END diff --git a/arch/arm/mach-footbridge/co285.c b/arch/arm/mach-footbridge/co285.c index e1541914fdc..548a7908168 100644 --- a/arch/arm/mach-footbridge/co285.c +++ b/arch/arm/mach-footbridge/co285.c @@ -28,11 +28,13 @@ fixup_coebsa285(struct machine_desc *desc, struct tag *tags, } MACHINE_START(CO285, "co-EBSA285") - MAINTAINER("Mark van Doesburg") - BOOT_MEM(0x00000000, DC21285_ARMCSR_BASE, 0x7cf00000) - FIXUP(fixup_coebsa285) - MAPIO(footbridge_map_io) - INITIRQ(footbridge_init_irq) + /* Maintainer: Mark van Doesburg */ + .phys_ram = 0x00000000, + .phys_io = DC21285_ARMCSR_BASE, + .io_pg_offst = ((0x7cf00000) >> 18) & 0xfffc, + .fixup = fixup_coebsa285, + .map_io = footbridge_map_io, + .init_irq = footbridge_init_irq, .timer = &footbridge_timer, MACHINE_END diff --git a/arch/arm/mach-footbridge/ebsa285.c b/arch/arm/mach-footbridge/ebsa285.c index d0931f5a63c..1c37605268d 100644 --- a/arch/arm/mach-footbridge/ebsa285.c +++ b/arch/arm/mach-footbridge/ebsa285.c @@ -13,12 +13,15 @@ #include "common.h" MACHINE_START(EBSA285, "EBSA285") - MAINTAINER("Russell King") - BOOT_MEM(0x00000000, DC21285_ARMCSR_BASE, 0xfe000000) - BOOT_PARAMS(0x00000100) - VIDEO(0x000a0000, 0x000bffff) - MAPIO(footbridge_map_io) - INITIRQ(footbridge_init_irq) + /* Maintainer: Russell King */ + .phys_ram = 0x00000000, + .phys_io = DC21285_ARMCSR_BASE, + .io_pg_offst = ((0xfe000000) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .video_start = 0x000a0000, + .video_end = 0x000bffff, + .map_io = footbridge_map_io, + .init_irq = footbridge_init_irq, .timer = &footbridge_timer, MACHINE_END diff --git a/arch/arm/mach-footbridge/netwinder-hw.c b/arch/arm/mach-footbridge/netwinder-hw.c index 1e1dfd79f4f..775f85fc851 100644 --- a/arch/arm/mach-footbridge/netwinder-hw.c +++ b/arch/arm/mach-footbridge/netwinder-hw.c @@ -647,14 +647,17 @@ fixup_netwinder(struct machine_desc *desc, struct tag *tags, } MACHINE_START(NETWINDER, "Rebel-NetWinder") - MAINTAINER("Russell King/Rebel.com") - BOOT_MEM(0x00000000, DC21285_ARMCSR_BASE, 0xfe000000) - BOOT_PARAMS(0x00000100) - VIDEO(0x000a0000, 0x000bffff) - DISABLE_PARPORT(0) - DISABLE_PARPORT(2) - FIXUP(fixup_netwinder) - MAPIO(footbridge_map_io) - INITIRQ(footbridge_init_irq) + /* Maintainer: Russell King/Rebel.com */ + .phys_ram = 0x00000000, + .phys_io = DC21285_ARMCSR_BASE, + .io_pg_offst = ((0xfe000000) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .video_start = 0x000a0000, + .video_end = 0x000bffff, + .reserve_lp0 = 1, + .reserve_lp2 = 1, + .fixup = fixup_netwinder, + .map_io = footbridge_map_io, + .init_irq = footbridge_init_irq, .timer = &isa_timer, MACHINE_END diff --git a/arch/arm/mach-footbridge/personal.c b/arch/arm/mach-footbridge/personal.c index 415086d7bbe..0146b8bb59d 100644 --- a/arch/arm/mach-footbridge/personal.c +++ b/arch/arm/mach-footbridge/personal.c @@ -13,11 +13,13 @@ #include "common.h" MACHINE_START(PERSONAL_SERVER, "Compaq-PersonalServer") - MAINTAINER("Jamey Hicks / George France") - BOOT_MEM(0x00000000, DC21285_ARMCSR_BASE, 0xfe000000) - BOOT_PARAMS(0x00000100) - MAPIO(footbridge_map_io) - INITIRQ(footbridge_init_irq) + /* Maintainer: Jamey Hicks / George France */ + .phys_ram = 0x00000000, + .phys_io = DC21285_ARMCSR_BASE, + .io_pg_offst = ((0xfe000000) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .map_io = footbridge_map_io, + .init_irq = footbridge_init_irq, .timer = &footbridge_timer, MACHINE_END diff --git a/arch/arm/mach-h720x/h7201-eval.c b/arch/arm/mach-h720x/h7201-eval.c index 9b24b9b0db1..fa59e9e2a5c 100644 --- a/arch/arm/mach-h720x/h7201-eval.c +++ b/arch/arm/mach-h720x/h7201-eval.c @@ -30,10 +30,12 @@ #include "common.h" MACHINE_START(H7201, "Hynix GMS30C7201") - MAINTAINER("Robert Schwebel, Pengutronix") - BOOT_MEM(0x40000000, 0x80000000, 0xf0000000) - BOOT_PARAMS(0xc0001000) - MAPIO(h720x_map_io) - INITIRQ(h720x_init_irq) - .timer = &h7201_timer, + /* Maintainer: Robert Schwebel, Pengutronix */ + .phys_ram = 0x40000000, + .phys_io = 0x80000000, + .io_pg_offst = ((0xf0000000) >> 18) & 0xfffc, + .boot_params = 0xc0001000, + .map_io = h720x_map_io, + .init_irq = h720x_init_irq, + .timer = &h7201_timer, MACHINE_END diff --git a/arch/arm/mach-h720x/h7202-eval.c b/arch/arm/mach-h720x/h7202-eval.c index 3456a00d5f5..db9078ad008 100644 --- a/arch/arm/mach-h720x/h7202-eval.c +++ b/arch/arm/mach-h720x/h7202-eval.c @@ -71,11 +71,13 @@ static void __init init_eval_h7202(void) } MACHINE_START(H7202, "Hynix HMS30C7202") - MAINTAINER("Robert Schwebel, Pengutronix") - BOOT_MEM(0x40000000, 0x80000000, 0xf0000000) - BOOT_PARAMS(0x40000100) - MAPIO(h720x_map_io) - INITIRQ(h7202_init_irq) - .timer = &h7202_timer, - INIT_MACHINE(init_eval_h7202) + /* Maintainer: Robert Schwebel, Pengutronix */ + .phys_ram = 0x40000000, + .phys_io = 0x80000000, + .io_pg_offst = ((0xf0000000) >> 18) & 0xfffc, + .boot_params = 0x40000100, + .map_io = h720x_map_io, + .init_irq = h7202_init_irq, + .timer = &h7202_timer, + .init_machine = init_eval_h7202, MACHINE_END diff --git a/arch/arm/mach-imx/mx1ads.c b/arch/arm/mach-imx/mx1ads.c index 625dd01c257..5d25434d332 100644 --- a/arch/arm/mach-imx/mx1ads.c +++ b/arch/arm/mach-imx/mx1ads.c @@ -78,11 +78,13 @@ mx1ads_map_io(void) } MACHINE_START(MX1ADS, "Motorola MX1ADS") - MAINTAINER("Sascha Hauer, Pengutronix") - BOOT_MEM(0x08000000, 0x00200000, 0xe0200000) - BOOT_PARAMS(0x08000100) - MAPIO(mx1ads_map_io) - INITIRQ(imx_init_irq) + /* Maintainer: Sascha Hauer, Pengutronix */ + .phys_ram = 0x08000000, + .phys_io = 0x00200000, + .io_pg_offst = ((0xe0200000) >> 18) & 0xfffc, + .boot_params = 0x08000100, + .map_io = mx1ads_map_io, + .init_irq = imx_init_irq, .timer = &imx_timer, - INIT_MACHINE(mx1ads_init) + .init_machine = mx1ads_init, MACHINE_END diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index 91ba9fd79c8..36e2b6eb67b 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -292,11 +292,13 @@ static struct sys_timer ap_timer = { }; MACHINE_START(INTEGRATOR, "ARM-Integrator") - MAINTAINER("ARM Ltd/Deep Blue Solutions Ltd") - BOOT_MEM(0x00000000, 0x16000000, 0xf1600000) - BOOT_PARAMS(0x00000100) - MAPIO(ap_map_io) - INITIRQ(ap_init_irq) + /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ + .phys_ram = 0x00000000, + .phys_io = 0x16000000, + .io_pg_offst = ((0xf1600000) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .map_io = ap_map_io, + .init_irq = ap_init_irq, .timer = &ap_timer, - INIT_MACHINE(ap_init) + .init_machine = ap_init, MACHINE_END diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c index e0a01eef099..569f328c479 100644 --- a/arch/arm/mach-integrator/integrator_cp.c +++ b/arch/arm/mach-integrator/integrator_cp.c @@ -532,11 +532,13 @@ static struct sys_timer cp_timer = { }; MACHINE_START(CINTEGRATOR, "ARM-IntegratorCP") - MAINTAINER("ARM Ltd/Deep Blue Solutions Ltd") - BOOT_MEM(0x00000000, 0x16000000, 0xf1600000) - BOOT_PARAMS(0x00000100) - MAPIO(intcp_map_io) - INITIRQ(intcp_init_irq) + /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ + .phys_ram = 0x00000000, + .phys_io = 0x16000000, + .io_pg_offst = ((0xf1600000) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .map_io = intcp_map_io, + .init_irq = intcp_init_irq, .timer = &cp_timer, - INIT_MACHINE(intcp_init) + .init_machine = intcp_init, MACHINE_END diff --git a/arch/arm/mach-iop3xx/iop321-setup.c b/arch/arm/mach-iop3xx/iop321-setup.c index bf23e0fd284..0f921ba2750 100644 --- a/arch/arm/mach-iop3xx/iop321-setup.c +++ b/arch/arm/mach-iop3xx/iop321-setup.c @@ -146,23 +146,27 @@ extern void iop321_init_time(void); #if defined(CONFIG_ARCH_IQ80321) MACHINE_START(IQ80321, "Intel IQ80321") - MAINTAINER("Intel Corporation") - BOOT_MEM(PHYS_OFFSET, IQ80321_UART, IQ80321_UART) - MAPIO(iq80321_map_io) - INITIRQ(iop321_init_irq) + /* Maintainer: Intel Corporation */ + .phys_ram = PHYS_OFFSET, + .phys_io = IQ80321_UART, + .io_pg_offst = ((IQ80321_UART) >> 18) & 0xfffc, + .map_io = iq80321_map_io, + .init_irq = iop321_init_irq, .timer = &iop321_timer, - BOOT_PARAMS(0xa0000100) - INIT_MACHINE(iop32x_init) + .boot_params = 0xa0000100, + .init_machine = iop32x_init, MACHINE_END #elif defined(CONFIG_ARCH_IQ31244) MACHINE_START(IQ31244, "Intel IQ31244") - MAINTAINER("Intel Corp.") - BOOT_MEM(PHYS_OFFSET, IQ31244_UART, IQ31244_UART) - MAPIO(iq31244_map_io) - INITIRQ(iop321_init_irq) + /* Maintainer: Intel Corp. */ + .phys_ram = PHYS_OFFSET, + .phys_io = IQ31244_UART, + .io_pg_offst = ((IQ31244_UART) >> 18) & 0xfffc, + .map_io = iq31244_map_io, + .init_irq = iop321_init_irq, .timer = &iop321_timer, - BOOT_PARAMS(0xa0000100) - INIT_MACHINE(iop32x_init) + .boot_params = 0xa0000100, + .init_machine = iop32x_init, MACHINE_END #else #error No machine descriptor defined for this IOP3XX implementation diff --git a/arch/arm/mach-iop3xx/iop331-setup.c b/arch/arm/mach-iop3xx/iop331-setup.c index 622e7914819..fc74b722f72 100644 --- a/arch/arm/mach-iop3xx/iop331-setup.c +++ b/arch/arm/mach-iop3xx/iop331-setup.c @@ -148,26 +148,28 @@ extern void iq80332_map_io(void); #if defined(CONFIG_ARCH_IQ80331) MACHINE_START(IQ80331, "Intel IQ80331") - MAINTAINER("Intel Corp.") - BOOT_MEM(PHYS_OFFSET, 0xfefff000, 0xfffff000) // virtual, physical - //BOOT_MEM(PHYS_OFFSET, IOP331_UART0_VIRT, IOP331_UART0_PHYS) - MAPIO(iq80331_map_io) - INITIRQ(iop331_init_irq) + /* Maintainer: Intel Corp. */ + .phys_ram = PHYS_OFFSET, + .phys_io = 0xfefff000, + .io_pg_offst = ((0xfffff000) >> 18) & 0xfffc, // virtual, physical + .map_io = iq80331_map_io, + .init_irq = iop331_init_irq, .timer = &iop331_timer, - BOOT_PARAMS(0x0100) - INIT_MACHINE(iop33x_init) + .boot_params = 0x0100, + .init_machine = iop33x_init, MACHINE_END #elif defined(CONFIG_MACH_IQ80332) MACHINE_START(IQ80332, "Intel IQ80332") - MAINTAINER("Intel Corp.") - BOOT_MEM(PHYS_OFFSET, 0xfefff000, 0xfffff000) // virtual, physical - //BOOT_MEM(PHYS_OFFSET, IOP331_UART0_VIRT, IOP331_UART0_PHYS) - MAPIO(iq80332_map_io) - INITIRQ(iop331_init_irq) + /* Maintainer: Intel Corp. */ + .phys_ram = PHYS_OFFSET, + .phys_io = 0xfefff000, + .io_pg_offst = ((0xfffff000) >> 18) & 0xfffc, // virtual, physical + .map_io = iq80332_map_io, + .init_irq = iop331_init_irq, .timer = &iop331_timer, - BOOT_PARAMS(0x0100) - INIT_MACHINE(iop33x_init) + .boot_params = 0x0100, + .init_machine = iop33x_init, MACHINE_END #else diff --git a/arch/arm/mach-ixp2000/enp2611.c b/arch/arm/mach-ixp2000/enp2611.c index f3a291b6a9f..b7ebf3898fc 100644 --- a/arch/arm/mach-ixp2000/enp2611.c +++ b/arch/arm/mach-ixp2000/enp2611.c @@ -223,13 +223,15 @@ static void __init enp2611_init_machine(void) MACHINE_START(ENP2611, "Radisys ENP-2611 PCI network processor board") - MAINTAINER("Lennert Buytenhek ") - BOOT_MEM(0x00000000, IXP2000_UART_PHYS_BASE, IXP2000_UART_VIRT_BASE) - BOOT_PARAMS(0x00000100) - MAPIO(ixp2000_map_io) - INITIRQ(ixp2000_init_irq) + /* Maintainer: Lennert Buytenhek */ + .phys_ram = 0x00000000, + .phys_io = IXP2000_UART_PHYS_BASE, + .io_pg_offst = ((IXP2000_UART_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .map_io = ixp2000_map_io, + .init_irq = ixp2000_init_irq, .timer = &enp2611_timer, - INIT_MACHINE(enp2611_init_machine) + .init_machine = enp2611_init_machine, MACHINE_END diff --git a/arch/arm/mach-ixp2000/ixdp2400.c b/arch/arm/mach-ixp2000/ixdp2400.c index df3ff26c8cd..fd280a93637 100644 --- a/arch/arm/mach-ixp2000/ixdp2400.c +++ b/arch/arm/mach-ixp2000/ixdp2400.c @@ -168,12 +168,14 @@ void ixdp2400_init_irq(void) } MACHINE_START(IXDP2400, "Intel IXDP2400 Development Platform") - MAINTAINER("MontaVista Software, Inc.") - BOOT_MEM(0x00000000, IXP2000_UART_PHYS_BASE, IXP2000_UART_VIRT_BASE) - BOOT_PARAMS(0x00000100) - MAPIO(ixdp2x00_map_io) - INITIRQ(ixdp2400_init_irq) + /* Maintainer: MontaVista Software, Inc. */ + .phys_ram = 0x00000000, + .phys_io = IXP2000_UART_PHYS_BASE, + .io_pg_offst = ((IXP2000_UART_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .map_io = ixdp2x00_map_io, + .init_irq = ixdp2400_init_irq, .timer = &ixdp2400_timer, - INIT_MACHINE(ixdp2x00_init_machine) + .init_machine = ixdp2x00_init_machine, MACHINE_END diff --git a/arch/arm/mach-ixp2000/ixdp2800.c b/arch/arm/mach-ixp2000/ixdp2800.c index 468a4bbfb72..f9073aa2861 100644 --- a/arch/arm/mach-ixp2000/ixdp2800.c +++ b/arch/arm/mach-ixp2000/ixdp2800.c @@ -284,12 +284,14 @@ void ixdp2800_init_irq(void) } MACHINE_START(IXDP2800, "Intel IXDP2800 Development Platform") - MAINTAINER("MontaVista Software, Inc.") - BOOT_MEM(0x00000000, IXP2000_UART_PHYS_BASE, IXP2000_UART_VIRT_BASE) - BOOT_PARAMS(0x00000100) - MAPIO(ixdp2x00_map_io) - INITIRQ(ixdp2800_init_irq) + /* Maintainer: MontaVista Software, Inc. */ + .phys_ram = 0x00000000, + .phys_io = IXP2000_UART_PHYS_BASE, + .io_pg_offst = ((IXP2000_UART_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .map_io = ixdp2x00_map_io, + .init_irq = ixdp2800_init_irq, .timer = &ixdp2800_timer, - INIT_MACHINE(ixdp2x00_init_machine) + .init_machine = ixdp2x00_init_machine, MACHINE_END diff --git a/arch/arm/mach-ixp2000/ixdp2x01.c b/arch/arm/mach-ixp2000/ixdp2x01.c index e94dace3d41..c73588743ee 100644 --- a/arch/arm/mach-ixp2000/ixdp2x01.c +++ b/arch/arm/mach-ixp2000/ixdp2x01.c @@ -375,25 +375,29 @@ static void __init ixdp2x01_init_machine(void) #ifdef CONFIG_ARCH_IXDP2401 MACHINE_START(IXDP2401, "Intel IXDP2401 Development Platform") - MAINTAINER("MontaVista Software, Inc.") - BOOT_MEM(0x00000000, IXP2000_UART_PHYS_BASE, IXP2000_UART_VIRT_BASE) - BOOT_PARAMS(0x00000100) - MAPIO(ixdp2x01_map_io) - INITIRQ(ixdp2x01_init_irq) + /* Maintainer: MontaVista Software, Inc. */ + .phys_ram = 0x00000000, + .phys_io = IXP2000_UART_PHYS_BASE, + .io_pg_offst = ((IXP2000_UART_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .map_io = ixdp2x01_map_io, + .init_irq = ixdp2x01_init_irq, .timer = &ixdp2x01_timer, - INIT_MACHINE(ixdp2x01_init_machine) + .init_machine = ixdp2x01_init_machine, MACHINE_END #endif #ifdef CONFIG_ARCH_IXDP2801 MACHINE_START(IXDP2801, "Intel IXDP2801 Development Platform") - MAINTAINER("MontaVista Software, Inc.") - BOOT_MEM(0x00000000, IXP2000_UART_PHYS_BASE, IXP2000_UART_VIRT_BASE) - BOOT_PARAMS(0x00000100) - MAPIO(ixdp2x01_map_io) - INITIRQ(ixdp2x01_init_irq) + /* Maintainer: MontaVista Software, Inc. */ + .phys_ram = 0x00000000, + .phys_io = IXP2000_UART_PHYS_BASE, + .io_pg_offst = ((IXP2000_UART_VIRT_BASE) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .map_io = ixdp2x01_map_io, + .init_irq = ixdp2x01_init_irq, .timer = &ixdp2x01_timer, - INIT_MACHINE(ixdp2x01_init_machine) + .init_machine = ixdp2x01_init_machine, MACHINE_END #endif diff --git a/arch/arm/mach-ixp4xx/coyote-setup.c b/arch/arm/mach-ixp4xx/coyote-setup.c index 8a05a1227e5..c6335f51907 100644 --- a/arch/arm/mach-ixp4xx/coyote-setup.c +++ b/arch/arm/mach-ixp4xx/coyote-setup.c @@ -100,14 +100,15 @@ static void __init coyote_init(void) #ifdef CONFIG_ARCH_ADI_COYOTE MACHINE_START(ADI_COYOTE, "ADI Engineering Coyote") - MAINTAINER("MontaVista Software, Inc.") - BOOT_MEM(PHYS_OFFSET, IXP4XX_PERIPHERAL_BASE_PHYS, - IXP4XX_PERIPHERAL_BASE_VIRT) - MAPIO(coyote_map_io) - INITIRQ(ixp4xx_init_irq) + /* Maintainer: MontaVista Software, Inc. */ + .phys_ram = PHYS_OFFSET, + .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, + .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, + .map_io = coyote_map_io, + .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, - BOOT_PARAMS(0x0100) - INIT_MACHINE(coyote_init) + .boot_params = 0x0100, + .init_machine = coyote_init, MACHINE_END #endif @@ -117,14 +118,15 @@ MACHINE_END */ #ifdef CONFIG_MACH_IXDPG425 MACHINE_START(IXDPG425, "Intel IXDPG425") - MAINTAINER("MontaVista Software, Inc.") - BOOT_MEM(PHYS_OFFSET, IXP4XX_PERIPHERAL_BASE_PHYS, - IXP4XX_PERIPHERAL_BASE_VIRT) - MAPIO(coyote_map_io) - INITIRQ(ixp4xx_init_irq) + /* Maintainer: MontaVista Software, Inc. */ + .phys_ram = PHYS_OFFSET, + .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, + .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, + .map_io = coyote_map_io, + .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, - BOOT_PARAMS(0x0100) - INIT_MACHINE(coyote_init) + .boot_params = 0x0100, + .init_machine = coyote_init, MACHINE_END #endif diff --git a/arch/arm/mach-ixp4xx/gtwx5715-setup.c b/arch/arm/mach-ixp4xx/gtwx5715-setup.c index e77c86efd21..8ba1cd9406e 100644 --- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c +++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c @@ -140,14 +140,15 @@ static void __init gtwx5715_init(void) MACHINE_START(GTWX5715, "Gemtek GTWX5715 (Linksys WRV54G)") - MAINTAINER("George Joseph") - BOOT_MEM(PHYS_OFFSET, IXP4XX_UART2_BASE_PHYS, - IXP4XX_UART2_BASE_VIRT) - MAPIO(gtwx5715_map_io) - INITIRQ(ixp4xx_init_irq) - .timer = &ixp4xx_timer, - BOOT_PARAMS(0x0100) - INIT_MACHINE(gtwx5715_init) + /* Maintainer: George Joseph */ + .phys_ram = PHYS_OFFSET, + .phys_io = IXP4XX_UART2_BASE_PHYS, + .io_pg_offst = ((IXP4XX_UART2_BASE_VIRT) >> 18) & 0xfffc, + .map_io = gtwx5715_map_io, + .init_irq = ixp4xx_init_irq, + .timer = &ixp4xx_timer, + .boot_params = 0x0100, + .init_machine = gtwx5715_init, MACHINE_END diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c index 77346c1f676..f2e9c0ea050 100644 --- a/arch/arm/mach-ixp4xx/ixdp425-setup.c +++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c @@ -128,36 +128,39 @@ static void __init ixdp425_init(void) } MACHINE_START(IXDP425, "Intel IXDP425 Development Platform") - MAINTAINER("MontaVista Software, Inc.") - BOOT_MEM(PHYS_OFFSET, IXP4XX_PERIPHERAL_BASE_PHYS, - IXP4XX_PERIPHERAL_BASE_VIRT) - MAPIO(ixdp425_map_io) - INITIRQ(ixp4xx_init_irq) + /* Maintainer: MontaVista Software, Inc. */ + .phys_ram = PHYS_OFFSET, + .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, + .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, + .map_io = ixdp425_map_io, + .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, - BOOT_PARAMS(0x0100) - INIT_MACHINE(ixdp425_init) + .boot_params = 0x0100, + .init_machine = ixdp425_init, MACHINE_END MACHINE_START(IXDP465, "Intel IXDP465 Development Platform") - MAINTAINER("MontaVista Software, Inc.") - BOOT_MEM(PHYS_OFFSET, IXP4XX_PERIPHERAL_BASE_PHYS, - IXP4XX_PERIPHERAL_BASE_VIRT) - MAPIO(ixdp425_map_io) - INITIRQ(ixp4xx_init_irq) + /* Maintainer: MontaVista Software, Inc. */ + .phys_ram = PHYS_OFFSET, + .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, + .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, + .map_io = ixdp425_map_io, + .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, - BOOT_PARAMS(0x0100) - INIT_MACHINE(ixdp425_init) + .boot_params = 0x0100, + .init_machine = ixdp425_init, MACHINE_END MACHINE_START(IXCDP1100, "Intel IXCDP1100 Development Platform") - MAINTAINER("MontaVista Software, Inc.") - BOOT_MEM(PHYS_OFFSET, IXP4XX_PERIPHERAL_BASE_PHYS, - IXP4XX_PERIPHERAL_BASE_VIRT) - MAPIO(ixdp425_map_io) - INITIRQ(ixp4xx_init_irq) + /* Maintainer: MontaVista Software, Inc. */ + .phys_ram = PHYS_OFFSET, + .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, + .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, + .map_io = ixdp425_map_io, + .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, - BOOT_PARAMS(0x0100) - INIT_MACHINE(ixdp425_init) + .boot_params = 0x0100, + .init_machine = ixdp425_init, MACHINE_END /* @@ -168,14 +171,15 @@ MACHINE_END */ #ifdef CONFIG_ARCH_AVILA MACHINE_START(AVILA, "Gateworks Avila Network Platform") - MAINTAINER("Deepak Saxena ") - BOOT_MEM(PHYS_OFFSET, IXP4XX_PERIPHERAL_BASE_PHYS, - IXP4XX_PERIPHERAL_BASE_VIRT) - MAPIO(ixdp425_map_io) - INITIRQ(ixp4xx_init_irq) + /* Maintainer: Deepak Saxena */ + .phys_ram = PHYS_OFFSET, + .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS, + .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc, + .map_io = ixdp425_map_io, + .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, - BOOT_PARAMS(0x0100) - INIT_MACHINE(ixdp425_init) + .boot_params = 0x0100, + .init_machine = ixdp425_init, MACHINE_END #endif diff --git a/arch/arm/mach-l7200/core.c b/arch/arm/mach-l7200/core.c index 606ca95f821..2a7fee2a763 100644 --- a/arch/arm/mach-l7200/core.c +++ b/arch/arm/mach-l7200/core.c @@ -81,9 +81,11 @@ static void __init l7200_map_io(void) } MACHINE_START(L7200, "LinkUp Systems L7200") - MAINTAINER("Steve Hill / Scott McConnell") - BOOT_MEM(0xf0000000, 0x80040000, 0xd0000000) - MAPIO(l7200_map_io) - INITIRQ(l7200_init_irq) + /* Maintainer: Steve Hill / Scott McConnell */ + .phys_ram = 0xf0000000, + .phys_io = 0x80040000, + .io_pg_offst = ((0xd0000000) >> 18) & 0xfffc, + .map_io = l7200_map_io, + .init_irq = l7200_init_irq, MACHINE_END diff --git a/arch/arm/mach-lh7a40x/arch-kev7a400.c b/arch/arm/mach-lh7a40x/arch-kev7a400.c index be5d17fe9dc..cb3dcd3bd00 100644 --- a/arch/arm/mach-lh7a40x/arch-kev7a400.c +++ b/arch/arm/mach-lh7a40x/arch-kev7a400.c @@ -102,10 +102,12 @@ void __init lh7a40x_init_board_irq (void) } MACHINE_START (KEV7A400, "Sharp KEV7a400") - MAINTAINER ("Marc Singer") - BOOT_MEM (0xc0000000, 0x80000000, io_p2v (0x80000000)) - BOOT_PARAMS (0xc0000100) - MAPIO (kev7a400_map_io) - INITIRQ (lh7a400_init_irq) + /* Maintainer: Marc Singer */ + .phys_ram = 0xc0000000, + .phys_io = 0x80000000, + .io_pg_offst = ((io_p2v (0x80000000))>>18) & 0xfffc, + .boot_params = 0xc0000100, + .map_io = kev7a400_map_io, + .init_irq = lh7a400_init_irq, .timer = &lh7a40x_timer, MACHINE_END diff --git a/arch/arm/mach-lh7a40x/arch-lpd7a40x.c b/arch/arm/mach-lh7a40x/arch-lpd7a40x.c index c823447a150..6eb61a17c63 100644 --- a/arch/arm/mach-lh7a40x/arch-lpd7a40x.c +++ b/arch/arm/mach-lh7a40x/arch-lpd7a40x.c @@ -260,13 +260,15 @@ lpd7a400_map_io(void) #ifdef CONFIG_MACH_LPD7A400 MACHINE_START (LPD7A400, "Logic Product Development LPD7A400-10") - MAINTAINER ("Marc Singer") - BOOT_MEM (0xc0000000, 0x80000000, io_p2v (0x80000000)) - BOOT_PARAMS (0xc0000100) - MAPIO (lpd7a400_map_io) - INITIRQ (lh7a400_init_irq) + /* Maintainer: Marc Singer */ + .phys_ram = 0xc0000000, + .phys_io = 0x80000000, + .io_pg_offst = ((io_p2v (0x80000000))>>18) & 0xfffc, + .boot_params = 0xc0000100, + .map_io = lpd7a400_map_io, + .init_irq = lh7a400_init_irq, .timer = &lh7a40x_timer, - INIT_MACHINE (lpd7a40x_init) + .init_machine = lpd7a40x_init, MACHINE_END #endif @@ -274,13 +276,15 @@ MACHINE_END #ifdef CONFIG_MACH_LPD7A404 MACHINE_START (LPD7A404, "Logic Product Development LPD7A404-10") - MAINTAINER ("Marc Singer") - BOOT_MEM (0xc0000000, 0x80000000, io_p2v (0x80000000)) - BOOT_PARAMS (0xc0000100) - MAPIO (lpd7a400_map_io) - INITIRQ (lh7a404_init_irq) + /* Maintainer: Marc Singer */ + .phys_ram = 0xc0000000, + .phys_io = 0x80000000, + .io_pg_offst = ((io_p2v (0x80000000))>>18) & 0xfffc, + .boot_params = 0xc0000100, + .map_io = lpd7a400_map_io, + .init_irq = lh7a404_init_irq, .timer = &lh7a40x_timer, - INIT_MACHINE (lpd7a40x_init) + .init_machine = lpd7a40x_init, MACHINE_END #endif diff --git a/arch/arm/mach-omap/board-generic.c b/arch/arm/mach-omap/board-generic.c index 2102a2cd101..384bc7cec1d 100644 --- a/arch/arm/mach-omap/board-generic.c +++ b/arch/arm/mach-omap/board-generic.c @@ -88,11 +88,13 @@ static void __init omap_generic_map_io(void) } MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710") - MAINTAINER("Tony Lindgren ") - BOOT_MEM(0x10000000, 0xfff00000, 0xfef00000) - BOOT_PARAMS(0x10000100) - MAPIO(omap_generic_map_io) - INITIRQ(omap_generic_init_irq) - INIT_MACHINE(omap_generic_init) + /* Maintainer: Tony Lindgren */ + .phys_ram = 0x10000000, + .phys_io = 0xfff00000, + .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, + .boot_params = 0x10000100, + .map_io = omap_generic_map_io, + .init_irq = omap_generic_init_irq, + .init_machine = omap_generic_init, .timer = &omap_timer, MACHINE_END diff --git a/arch/arm/mach-omap/board-h2.c b/arch/arm/mach-omap/board-h2.c index 1f067830d1f..f37c76a9b16 100644 --- a/arch/arm/mach-omap/board-h2.c +++ b/arch/arm/mach-omap/board-h2.c @@ -177,11 +177,13 @@ static void __init h2_map_io(void) } MACHINE_START(OMAP_H2, "TI-H2") - MAINTAINER("Imre Deak ") - BOOT_MEM(0x10000000, 0xfff00000, 0xfef00000) - BOOT_PARAMS(0x10000100) - MAPIO(h2_map_io) - INITIRQ(h2_init_irq) - INIT_MACHINE(h2_init) + /* Maintainer: Imre Deak */ + .phys_ram = 0x10000000, + .phys_io = 0xfff00000, + .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, + .boot_params = 0x10000100, + .map_io = h2_map_io, + .init_irq = h2_init_irq, + .init_machine = h2_init, .timer = &omap_timer, MACHINE_END diff --git a/arch/arm/mach-omap/board-h3.c b/arch/arm/mach-omap/board-h3.c index 486a5a006c9..705e48594e9 100644 --- a/arch/arm/mach-omap/board-h3.c +++ b/arch/arm/mach-omap/board-h3.c @@ -195,11 +195,13 @@ static void __init h3_map_io(void) } MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board") - MAINTAINER("Texas Instruments, Inc.") - BOOT_MEM(0x10000000, 0xfff00000, 0xfef00000) - BOOT_PARAMS(0x10000100) - MAPIO(h3_map_io) - INITIRQ(h3_init_irq) - INIT_MACHINE(h3_init) + /* Maintainer: Texas Instruments, Inc. */ + .phys_ram = 0x10000000, + .phys_io = 0xfff00000, + .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, + .boot_params = 0x10000100, + .map_io = h3_map_io, + .init_irq = h3_init_irq, + .init_machine = h3_init, .timer = &omap_timer, MACHINE_END diff --git a/arch/arm/mach-omap/board-innovator.c b/arch/arm/mach-omap/board-innovator.c index 57cf4da88d5..523363f18cc 100644 --- a/arch/arm/mach-omap/board-innovator.c +++ b/arch/arm/mach-omap/board-innovator.c @@ -270,11 +270,13 @@ static void __init innovator_map_io(void) } MACHINE_START(OMAP_INNOVATOR, "TI-Innovator") - MAINTAINER("MontaVista Software, Inc.") - BOOT_MEM(0x10000000, 0xfff00000, 0xfef00000) - BOOT_PARAMS(0x10000100) - MAPIO(innovator_map_io) - INITIRQ(innovator_init_irq) - INIT_MACHINE(innovator_init) + /* Maintainer: MontaVista Software, Inc. */ + .phys_ram = 0x10000000, + .phys_io = 0xfff00000, + .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, + .boot_params = 0x10000100, + .map_io = innovator_map_io, + .init_irq = innovator_init_irq, + .init_machine = innovator_init, .timer = &omap_timer, MACHINE_END diff --git a/arch/arm/mach-omap/board-netstar.c b/arch/arm/mach-omap/board-netstar.c index 54acbd215c4..8c653734d5a 100644 --- a/arch/arm/mach-omap/board-netstar.c +++ b/arch/arm/mach-omap/board-netstar.c @@ -141,11 +141,13 @@ static int __init netstar_late_init(void) postcore_initcall(netstar_late_init); MACHINE_START(NETSTAR, "NetStar OMAP5910") - MAINTAINER("Ladislav Michl ") - BOOT_MEM(0x10000000, 0xfff00000, 0xfef00000) - BOOT_PARAMS(0x10000100) - MAPIO(netstar_map_io) - INITIRQ(netstar_init_irq) - INIT_MACHINE(netstar_init) - .timer = &omap_timer, + /* Maintainer: Ladislav Michl */ + .phys_ram = 0x10000000, + .phys_io = 0xfff00000, + .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, + .boot_params = 0x10000100, + .map_io = netstar_map_io, + .init_irq = netstar_init_irq, + .init_machine = netstar_init, + .timer = &omap_timer, MACHINE_END diff --git a/arch/arm/mach-omap/board-osk.c b/arch/arm/mach-omap/board-osk.c index a951fc82459..cb433436aa0 100644 --- a/arch/arm/mach-omap/board-osk.c +++ b/arch/arm/mach-omap/board-osk.c @@ -159,11 +159,13 @@ static void __init osk_map_io(void) } MACHINE_START(OMAP_OSK, "TI-OSK") - MAINTAINER("Dirk Behme ") - BOOT_MEM(0x10000000, 0xfff00000, 0xfef00000) - BOOT_PARAMS(0x10000100) - MAPIO(osk_map_io) - INITIRQ(osk_init_irq) - INIT_MACHINE(osk_init) + /* Maintainer: Dirk Behme */ + .phys_ram = 0x10000000, + .phys_io = 0xfff00000, + .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, + .boot_params = 0x10000100, + .map_io = osk_map_io, + .init_irq = osk_init_irq, + .init_machine = osk_init, .timer = &omap_timer, MACHINE_END diff --git a/arch/arm/mach-omap/board-perseus2.c b/arch/arm/mach-omap/board-perseus2.c index 64515aeb49c..d5342043d48 100644 --- a/arch/arm/mach-omap/board-perseus2.c +++ b/arch/arm/mach-omap/board-perseus2.c @@ -179,11 +179,13 @@ static void __init omap_perseus2_map_io(void) } MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2") - MAINTAINER("Kevin Hilman ") - BOOT_MEM(0x10000000, 0xfff00000, 0xfef00000) - BOOT_PARAMS(0x10000100) - MAPIO(omap_perseus2_map_io) - INITIRQ(omap_perseus2_init_irq) - INIT_MACHINE(omap_perseus2_init) + /* Maintainer: Kevin Hilman */ + .phys_ram = 0x10000000, + .phys_io = 0xfff00000, + .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, + .boot_params = 0x10000100, + .map_io = omap_perseus2_map_io, + .init_irq = omap_perseus2_init_irq, + .init_machine = omap_perseus2_init, .timer = &omap_timer, MACHINE_END diff --git a/arch/arm/mach-omap/board-voiceblue.c b/arch/arm/mach-omap/board-voiceblue.c index f1a5bffac66..6b0c5003d71 100644 --- a/arch/arm/mach-omap/board-voiceblue.c +++ b/arch/arm/mach-omap/board-voiceblue.c @@ -246,11 +246,13 @@ EXPORT_SYMBOL(voiceblue_wdt_disable); EXPORT_SYMBOL(voiceblue_wdt_ping); MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910") - MAINTAINER("Ladislav Michl ") - BOOT_MEM(0x10000000, 0xfff00000, 0xfef00000) - BOOT_PARAMS(0x10000100) - MAPIO(voiceblue_map_io) - INITIRQ(voiceblue_init_irq) - INIT_MACHINE(voiceblue_init) - .timer = &omap_timer, + /* Maintainer: Ladislav Michl */ + .phys_ram = 0x10000000, + .phys_io = 0xfff00000, + .io_pg_offst = ((0xfef00000) >> 18) & 0xfffc, + .boot_params = 0x10000100, + .map_io = voiceblue_map_io, + .init_irq = voiceblue_init_irq, + .init_machine = voiceblue_init, + .timer = &omap_timer, MACHINE_END diff --git a/arch/arm/mach-omap/usb.c b/arch/arm/mach-omap/usb.c index 7f37857b1a2..fd483ff9f8f 100644 --- a/arch/arm/mach-omap/usb.c +++ b/arch/arm/mach-omap/usb.c @@ -41,7 +41,6 @@ /* These routines should handle the standard chip-specific modes * for usb0/1/2 ports, covering basic mux and transceiver setup. - * Call omap_usb_init() once, from INIT_MACHINE(). * * Some board-*.c files will need to set up additional mux options, * like for suspend handling, vbus sensing, GPIOs, and the D+ pullup. diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index f691cf77d39..276431bf1ce 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -287,34 +287,40 @@ static void __init corgi_map_io(void) #ifdef CONFIG_MACH_CORGI MACHINE_START(CORGI, "SHARP Corgi") - BOOT_MEM(0xa0000000, 0x40000000, io_p2v(0x40000000)) - FIXUP(fixup_corgi) - MAPIO(corgi_map_io) - INITIRQ(corgi_init_irq) - .init_machine = corgi_init, - .timer = &pxa_timer, + .phys_ram = 0xa0000000, + .phys_io = 0x40000000, + .io_pg_offst = ((io_p2v(0x40000000) >> 18) & 0xfffc,) + .fixup = fixup_corgi, + .map_io = corgi_map_io, + .init_irq = corgi_init_irq, + .init_machine = corgi_init, + .timer = &pxa_timer, MACHINE_END #endif #ifdef CONFIG_MACH_SHEPHERD MACHINE_START(SHEPHERD, "SHARP Shepherd") - BOOT_MEM(0xa0000000, 0x40000000, io_p2v(0x40000000)) - FIXUP(fixup_corgi) - MAPIO(corgi_map_io) - INITIRQ(corgi_init_irq) - .init_machine = corgi_init, - .timer = &pxa_timer, + .phys_ram = 0xa0000000, + .phys_io = 0x40000000, + .io_pg_offst = ((io_p2v(0x40000000) >> 18) & 0xfffc,) + .fixup = fixup_corgi, + .map_io = corgi_map_io, + .init_irq = corgi_init_irq, + .init_machine = corgi_init, + .timer = &pxa_timer, MACHINE_END #endif #ifdef CONFIG_MACH_HUSKY MACHINE_START(HUSKY, "SHARP Husky") - BOOT_MEM(0xa0000000, 0x40000000, io_p2v(0x40000000)) - FIXUP(fixup_corgi) - MAPIO(corgi_map_io) - INITIRQ(corgi_init_irq) - .init_machine = corgi_init, - .timer = &pxa_timer, + .phys_ram = 0xa0000000, + .phys_io = 0x40000000, + .io_pg_offst = ((io_p2v(0x40000000) >> 18) & 0xfffc,) + .fixup = fixup_corgi, + .map_io = corgi_map_io, + .init_irq = corgi_init_irq, + .init_machine = corgi_init, + .timer = &pxa_timer, MACHINE_END #endif diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c index c5a66bf4d3d..f82f5aad560 100644 --- a/arch/arm/mach-pxa/idp.c +++ b/arch/arm/mach-pxa/idp.c @@ -181,10 +181,12 @@ static void __init idp_map_io(void) MACHINE_START(PXA_IDP, "Vibren PXA255 IDP") - MAINTAINER("Vibren Technologies") - BOOT_MEM(0xa0000000, 0x40000000, io_p2v(0x40000000)) - MAPIO(idp_map_io) - INITIRQ(idp_init_irq) + /* Maintainer: Vibren Technologies */ + .phys_ram = 0xa0000000, + .phys_io = 0x40000000, + .io_pg_offst = ((io_p2v(0x40000000) >> 18) & 0xfffc,) + .map_io = idp_map_io, + .init_irq = idp_init_irq, .timer = &pxa_timer, - INIT_MACHINE(idp_init) + .init_machine = idp_init, MACHINE_END diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index f2c9e0d2b24..e30b7c62270 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -268,10 +268,12 @@ static void __init lubbock_map_io(void) } MACHINE_START(LUBBOCK, "Intel DBPXA250 Development Platform (aka Lubbock)") - MAINTAINER("MontaVista Software Inc.") - BOOT_MEM(0xa0000000, 0x40000000, io_p2v(0x40000000)) - MAPIO(lubbock_map_io) - INITIRQ(lubbock_init_irq) + /* Maintainer: MontaVista Software Inc. */ + .phys_ram = 0xa0000000, + .phys_io = 0x40000000, + .io_pg_offst = ((io_p2v(0x40000000) >> 18) & 0xfffc,) + .map_io = lubbock_map_io, + .init_irq = lubbock_init_irq, .timer = &pxa_timer, - INIT_MACHINE(lubbock_init) + .init_machine = lubbock_init, MACHINE_END diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index 9896afca751..5d2f76b6df0 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -345,10 +345,12 @@ static void __init mainstone_map_io(void) } MACHINE_START(MAINSTONE, "Intel HCDDBBVA0 Development Platform (aka Mainstone)") - MAINTAINER("MontaVista Software Inc.") - BOOT_MEM(0xa0000000, 0x40000000, io_p2v(0x40000000)) - MAPIO(mainstone_map_io) - INITIRQ(mainstone_init_irq) + /* Maintainer: MontaVista Software Inc. */ + .phys_ram = 0xa0000000, + .phys_io = 0x40000000, + .io_pg_offst = ((io_p2v(0x40000000) >> 18) & 0xfffc,) + .map_io = mainstone_map_io, + .init_irq = mainstone_init_irq, .timer = &pxa_timer, - INIT_MACHINE(mainstone_init) + .init_machine = mainstone_init, MACHINE_END diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index b6c746ea383..ebae969e883 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -180,10 +180,12 @@ static void __init poodle_map_io(void) } MACHINE_START(POODLE, "SHARP Poodle") - BOOT_MEM(0xa0000000, 0x40000000, io_p2v(0x40000000)) - FIXUP(fixup_poodle) - MAPIO(poodle_map_io) - INITIRQ(pxa_init_irq) - .timer = &pxa_timer, - .init_machine = poodle_init, + .phys_ram = 0xa0000000, + .phys_io = 0x40000000, + .io_pg_offst = ((io_p2v(0x40000000) >> 18) & 0xfffc,) + .fixup = fixup_poodle, + .map_io = poodle_map_io, + .init_irq = pxa_init_irq, + .timer = &pxa_timer, + .init_machine = poodle_init, MACHINE_END diff --git a/arch/arm/mach-rpc/riscpc.c b/arch/arm/mach-rpc/riscpc.c index 43710688143..a10268618f7 100644 --- a/arch/arm/mach-rpc/riscpc.c +++ b/arch/arm/mach-rpc/riscpc.c @@ -163,12 +163,14 @@ arch_initcall(rpc_init); extern struct sys_timer ioc_timer; MACHINE_START(RISCPC, "Acorn-RiscPC") - MAINTAINER("Russell King") - BOOT_MEM(0x10000000, 0x03000000, 0xe0000000) - BOOT_PARAMS(0x10000100) - DISABLE_PARPORT(0) - DISABLE_PARPORT(1) - MAPIO(rpc_map_io) - INITIRQ(rpc_init_irq) + /* Maintainer: Russell King */ + .phys_ram = 0x10000000, + .phys_io = 0x03000000, + .io_pg_offst = ((0xe0000000) >> 18) & 0xfffc, + .boot_params = 0x10000100, + .reserve_lp0 = 1, + .reserve_lp1 = 1, + .map_io = rpc_map_io, + .init_irq = rpc_init_irq, .timer = &ioc_timer, MACHINE_END diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c index 549bcb1f32c..ccb6bcefa46 100644 --- a/arch/arm/mach-s3c2410/mach-bast.c +++ b/arch/arm/mach-s3c2410/mach-bast.c @@ -407,10 +407,11 @@ void __init bast_map_io(void) MACHINE_START(BAST, "Simtec-BAST") - MAINTAINER("Ben Dooks ") - BOOT_MEM(S3C2410_SDRAM_PA, S3C2410_PA_UART, (u32)S3C24XX_VA_UART) - BOOT_PARAMS(S3C2410_SDRAM_PA + 0x100) - + /* Maintainer: Ben Dooks */ + .phys_ram = S3C2410_SDRAM_PA, + .phys_io = S3C2410_PA_UART, + .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, + .boot_params = S3C2410_SDRAM_PA + 0x100, .map_io = bast_map_io, .init_irq = s3c24xx_init_irq, .timer = &s3c24xx_timer, diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c index 2924afc068a..ea4fb1a97a5 100644 --- a/arch/arm/mach-s3c2410/mach-h1940.c +++ b/arch/arm/mach-s3c2410/mach-h1940.c @@ -117,10 +117,12 @@ void __init h1940_init_irq(void) } MACHINE_START(H1940, "IPAQ-H1940") - MAINTAINER("Ben Dooks ") - BOOT_MEM(S3C2410_SDRAM_PA, S3C2410_PA_UART, (u32)S3C24XX_VA_UART) - BOOT_PARAMS(S3C2410_SDRAM_PA + 0x100) - MAPIO(h1940_map_io) - INITIRQ(h1940_init_irq) + /* Maintainer: Ben Dooks */ + .phys_ram = S3C2410_SDRAM_PA, + .phys_io = S3C2410_PA_UART, + .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, + .boot_params = S3C2410_SDRAM_PA + 0x100, + .map_io = h1940_map_io, + .init_irq = h1940_init_irq, .timer = &s3c24xx_timer, MACHINE_END diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c index bd15998c129..79044d9bce3 100644 --- a/arch/arm/mach-s3c2410/mach-n30.c +++ b/arch/arm/mach-s3c2410/mach-n30.c @@ -137,10 +137,11 @@ void __init n30_init(void) } MACHINE_START(N30, "Acer-N30") - MAINTAINER("Christer Weinigel , Ben Dooks ") - BOOT_MEM(S3C2410_SDRAM_PA, S3C2410_PA_UART, (u32)S3C24XX_VA_UART) - BOOT_PARAMS(S3C2410_SDRAM_PA + 0x100) - + /* Maintainer: Christer Weinigel , Ben Dooks */ + .phys_ram = S3C2410_SDRAM_PA, + .phys_io = S3C2410_PA_UART, + .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, + .boot_params = S3C2410_SDRAM_PA + 0x100, .timer = &s3c24xx_timer, .init_machine = n30_init, .init_irq = n30_init_irq, diff --git a/arch/arm/mach-s3c2410/mach-nexcoder.c b/arch/arm/mach-s3c2410/mach-nexcoder.c index 70487bf4b71..d24c242414c 100644 --- a/arch/arm/mach-s3c2410/mach-nexcoder.c +++ b/arch/arm/mach-s3c2410/mach-nexcoder.c @@ -147,9 +147,11 @@ void __init nexcoder_map_io(void) MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440") - MAINTAINER("Guillaume GOURAT ") - BOOT_MEM(S3C2410_SDRAM_PA, S3C2410_PA_UART, (u32)S3C24XX_VA_UART) - BOOT_PARAMS(S3C2410_SDRAM_PA + 0x100) + /* Maintainer: Guillaume GOURAT */ + .phys_ram = S3C2410_SDRAM_PA, + .phys_io = S3C2410_PA_UART, + .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, + .boot_params = S3C2410_SDRAM_PA + 0x100, .map_io = nexcoder_map_io, .init_irq = s3c24xx_init_irq, .timer = &s3c24xx_timer, diff --git a/arch/arm/mach-s3c2410/mach-otom.c b/arch/arm/mach-s3c2410/mach-otom.c index 67d8ce8fb00..d901ed492ff 100644 --- a/arch/arm/mach-s3c2410/mach-otom.c +++ b/arch/arm/mach-s3c2410/mach-otom.c @@ -115,9 +115,11 @@ void __init otom11_map_io(void) MACHINE_START(OTOM, "Nex Vision - Otom 1.1") - MAINTAINER("Guillaume GOURAT ") - BOOT_MEM(S3C2410_SDRAM_PA, S3C2410_PA_UART, (u32)S3C24XX_VA_UART) - BOOT_PARAMS(S3C2410_SDRAM_PA + 0x100) + /* Maintainer: Guillaume GOURAT */ + .phys_ram = S3C2410_SDRAM_PA, + .phys_io = S3C2410_PA_UART, + .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, + .boot_params = S3C2410_SDRAM_PA + 0x100, .map_io = otom11_map_io, .init_irq = s3c24xx_init_irq, .timer = &s3c24xx_timer, diff --git a/arch/arm/mach-s3c2410/mach-rx3715.c b/arch/arm/mach-s3c2410/mach-rx3715.c index f8d3a9784e7..a73d61c1de4 100644 --- a/arch/arm/mach-s3c2410/mach-rx3715.c +++ b/arch/arm/mach-s3c2410/mach-rx3715.c @@ -131,11 +131,13 @@ static void __init rx3715_init_machine(void) #endif MACHINE_START(RX3715, "IPAQ-RX3715") - MAINTAINER("Ben Dooks ") - BOOT_MEM(S3C2410_SDRAM_PA, S3C2410_PA_UART, (u32)S3C24XX_VA_UART) - BOOT_PARAMS(S3C2410_SDRAM_PA + 0x100) - MAPIO(rx3715_map_io) - INITIRQ(rx3715_init_irq) - INIT_MACHINE(rx3715_init_machine) + /* Maintainer: Ben Dooks */ + .phys_ram = S3C2410_SDRAM_PA, + .phys_io = S3C2410_PA_UART, + .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, + .boot_params = S3C2410_SDRAM_PA + 0x100, + .map_io = rx3715_map_io, + .init_irq = rx3715_init_irq, + .init_machine = rx3715_init_machine, .timer = &s3c24xx_timer, MACHINE_END diff --git a/arch/arm/mach-s3c2410/mach-smdk2410.c b/arch/arm/mach-s3c2410/mach-smdk2410.c index c1a4a1420ea..67e903a700d 100644 --- a/arch/arm/mach-s3c2410/mach-smdk2410.c +++ b/arch/arm/mach-s3c2410/mach-smdk2410.c @@ -112,11 +112,13 @@ void __init smdk2410_init_irq(void) MACHINE_START(SMDK2410, "SMDK2410") /* @TODO: request a new identifier and switch * to SMDK2410 */ - MAINTAINER("Jonas Dietsche") - BOOT_MEM(S3C2410_SDRAM_PA, S3C2410_PA_UART, (u32)S3C24XX_VA_UART) - BOOT_PARAMS(S3C2410_SDRAM_PA + 0x100) - MAPIO(smdk2410_map_io) - INITIRQ(smdk2410_init_irq) + /* Maintainer: Jonas Dietsche */ + .phys_ram = S3C2410_SDRAM_PA, + .phys_io = S3C2410_PA_UART, + .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, + .boot_params = S3C2410_SDRAM_PA + 0x100, + .map_io = smdk2410_map_io, + .init_irq = smdk2410_init_irq, .timer = &s3c24xx_timer, MACHINE_END diff --git a/arch/arm/mach-s3c2410/mach-smdk2440.c b/arch/arm/mach-s3c2410/mach-smdk2440.c index 7857176d9bc..357522106f6 100644 --- a/arch/arm/mach-s3c2410/mach-smdk2440.c +++ b/arch/arm/mach-s3c2410/mach-smdk2440.c @@ -124,9 +124,11 @@ void __init smdk2440_machine_init(void) } MACHINE_START(S3C2440, "SMDK2440") - MAINTAINER("Ben Dooks ") - BOOT_MEM(S3C2410_SDRAM_PA, S3C2410_PA_UART, (u32)S3C24XX_VA_UART) - BOOT_PARAMS(S3C2410_SDRAM_PA + 0x100) + /* Maintainer: Ben Dooks */ + .phys_ram = S3C2410_SDRAM_PA, + .phys_io = S3C2410_PA_UART, + .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, + .boot_params = S3C2410_SDRAM_PA + 0x100, .init_irq = s3c24xx_init_irq, .map_io = smdk2440_map_io, diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c index 1db2855e3e5..924e8464c21 100644 --- a/arch/arm/mach-s3c2410/mach-vr1000.c +++ b/arch/arm/mach-s3c2410/mach-vr1000.c @@ -373,9 +373,11 @@ void __init vr1000_map_io(void) MACHINE_START(VR1000, "Thorcom-VR1000") - MAINTAINER("Ben Dooks ") - BOOT_MEM(S3C2410_SDRAM_PA, S3C2410_PA_UART, (u32)S3C24XX_VA_UART) - BOOT_PARAMS(S3C2410_SDRAM_PA + 0x100) + /* Maintainer: Ben Dooks */ + .phys_ram = S3C2410_SDRAM_PA, + .phys_io = S3C2410_PA_UART, + .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, + .boot_params = S3C2410_SDRAM_PA + 0x100, .map_io = vr1000_map_io, .init_irq = s3c24xx_init_irq, .timer = &s3c24xx_timer, diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c index bedf88fafe0..4d4d303ee3a 100644 --- a/arch/arm/mach-sa1100/assabet.c +++ b/arch/arm/mach-sa1100/assabet.c @@ -431,11 +431,13 @@ static void __init assabet_map_io(void) MACHINE_START(ASSABET, "Intel-Assabet") - BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000) - BOOT_PARAMS(0xc0000100) - FIXUP(fixup_assabet) - MAPIO(assabet_map_io) - INITIRQ(sa1100_init_irq) + .phys_ram = 0xc0000000, + .phys_io = 0x80000000, + .io_pg_offst = ((0xf8000000) >> 18) & 0xfffc, + .boot_params = 0xc0000100, + .fixup = fixup_assabet, + .map_io = assabet_map_io, + .init_irq = sa1100_init_irq, .timer = &sa1100_timer, .init_machine = assabet_init, MACHINE_END diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c index 6a60b497ab4..b6169cb0919 100644 --- a/arch/arm/mach-sa1100/badge4.c +++ b/arch/arm/mach-sa1100/badge4.c @@ -285,9 +285,11 @@ static void __init badge4_map_io(void) } MACHINE_START(BADGE4, "Hewlett-Packard Laboratories BadgePAD 4") - BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000) - BOOT_PARAMS(0xc0000100) - MAPIO(badge4_map_io) - INITIRQ(sa1100_init_irq) + .phys_ram = 0xc0000000, + .phys_io = 0x80000000, + .io_pg_offst = ((0xf8000000) >> 18) & 0xfffc, + .boot_params = 0xc0000100, + .map_io = badge4_map_io, + .init_irq = sa1100_init_irq, .timer = &sa1100_timer, MACHINE_END diff --git a/arch/arm/mach-sa1100/cerf.c b/arch/arm/mach-sa1100/cerf.c index f8edde5e7cb..0aa918e24c3 100644 --- a/arch/arm/mach-sa1100/cerf.c +++ b/arch/arm/mach-sa1100/cerf.c @@ -123,10 +123,12 @@ static void __init cerf_init(void) } MACHINE_START(CERF, "Intrinsyc CerfBoard/CerfCube") - MAINTAINER("support@intrinsyc.com") - BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000) - MAPIO(cerf_map_io) - INITIRQ(cerf_init_irq) + /* Maintainer: support@intrinsyc.com */ + .phys_ram = 0xc0000000, + .phys_io = 0x80000000, + .io_pg_offst = ((0xf8000000) >> 18) & 0xfffc, + .map_io = cerf_map_io, + .init_irq = cerf_init_irq, .timer = &sa1100_timer, .init_machine = cerf_init, MACHINE_END diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c index 99287890d39..8cb69113a57 100644 --- a/arch/arm/mach-sa1100/collie.c +++ b/arch/arm/mach-sa1100/collie.c @@ -184,9 +184,11 @@ static void __init collie_map_io(void) } MACHINE_START(COLLIE, "Sharp-Collie") - BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000) - MAPIO(collie_map_io) - INITIRQ(sa1100_init_irq) + .phys_ram = 0xc0000000, + .phys_io = 0x80000000, + .io_pg_offst = ((0xf8000000) >> 18) & 0xfffc, + .map_io = collie_map_io, + .init_irq = sa1100_init_irq, .timer = &sa1100_timer, .init_machine = collie_init, MACHINE_END diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c index 65dbe991426..e7aa2681ca6 100644 --- a/arch/arm/mach-sa1100/h3600.c +++ b/arch/arm/mach-sa1100/h3600.c @@ -380,10 +380,12 @@ static void __init h3100_map_io(void) } MACHINE_START(H3100, "Compaq iPAQ H3100") - BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000) - BOOT_PARAMS(0xc0000100) - MAPIO(h3100_map_io) - INITIRQ(sa1100_init_irq) + .phys_ram = 0xc0000000, + .phys_io = 0x80000000, + .io_pg_offst = ((0xf8000000) >> 18) & 0xfffc, + .boot_params = 0xc0000100, + .map_io = h3100_map_io, + .init_irq = sa1100_init_irq, .timer = &sa1100_timer, .init_machine = h3xxx_mach_init, MACHINE_END @@ -496,10 +498,12 @@ static void __init h3600_map_io(void) } MACHINE_START(H3600, "Compaq iPAQ H3600") - BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000) - BOOT_PARAMS(0xc0000100) - MAPIO(h3600_map_io) - INITIRQ(sa1100_init_irq) + .phys_ram = 0xc0000000, + .phys_io = 0x80000000, + .io_pg_offst = ((0xf8000000) >> 18) & 0xfffc, + .boot_params = 0xc0000100, + .map_io = h3600_map_io, + .init_irq = sa1100_init_irq, .timer = &sa1100_timer, .init_machine = h3xxx_mach_init, MACHINE_END @@ -881,10 +885,12 @@ static void __init h3800_map_io(void) } MACHINE_START(H3800, "Compaq iPAQ H3800") - BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000) - BOOT_PARAMS(0xc0000100) - MAPIO(h3800_map_io) - INITIRQ(h3800_init_irq) + .phys_ram = 0xc0000000, + .phys_io = 0x80000000, + .io_pg_offst = ((0xf8000000) >> 18) & 0xfffc, + .boot_params = 0xc0000100, + .map_io = h3800_map_io, + .init_irq = h3800_init_irq, .timer = &sa1100_timer, .init_machine = h3xxx_mach_init, MACHINE_END diff --git a/arch/arm/mach-sa1100/hackkit.c b/arch/arm/mach-sa1100/hackkit.c index 57084177971..502d65cfe65 100644 --- a/arch/arm/mach-sa1100/hackkit.c +++ b/arch/arm/mach-sa1100/hackkit.c @@ -191,10 +191,12 @@ static void __init hackkit_init(void) */ MACHINE_START(HACKKIT, "HackKit Cpu Board") - BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000) - BOOT_PARAMS(0xc0000100) - MAPIO(hackkit_map_io) - INITIRQ(sa1100_init_irq) + .phys_ram = 0xc0000000, + .phys_io = 0x80000000, + .io_pg_offst = ((0xf8000000) >> 18) & 0xfffc, + .boot_params = 0xc0000100, + .map_io = hackkit_map_io, + .init_irq = sa1100_init_irq, .timer = &sa1100_timer, .init_machine = hackkit_init, MACHINE_END diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c index 6be78291a87..eee3cbc5ec4 100644 --- a/arch/arm/mach-sa1100/jornada720.c +++ b/arch/arm/mach-sa1100/jornada720.c @@ -97,9 +97,11 @@ static void __init jornada720_map_io(void) } MACHINE_START(JORNADA720, "HP Jornada 720") - BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000) - BOOT_PARAMS(0xc0000100) - MAPIO(jornada720_map_io) - INITIRQ(sa1100_init_irq) + .phys_ram = 0xc0000000, + .phys_io = 0x80000000, + .io_pg_offst = ((0xf8000000) >> 18) & 0xfffc, + .boot_params = 0xc0000100, + .map_io = jornada720_map_io, + .init_irq = sa1100_init_irq, .timer = &sa1100_timer, MACHINE_END diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c index 51c08ccfb8d..870b488aeda 100644 --- a/arch/arm/mach-sa1100/lart.c +++ b/arch/arm/mach-sa1100/lart.c @@ -41,9 +41,11 @@ static void __init lart_map_io(void) } MACHINE_START(LART, "LART") - BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000) - BOOT_PARAMS(0xc0000100) - MAPIO(lart_map_io) - INITIRQ(sa1100_init_irq) + .phys_ram = 0xc0000000, + .phys_io = 0x80000000, + .io_pg_offst = ((0xf8000000) >> 18) & 0xfffc, + .boot_params = 0xc0000100, + .map_io = lart_map_io, + .init_irq = sa1100_init_irq, .timer = &sa1100_timer, MACHINE_END diff --git a/arch/arm/mach-sa1100/pleb.c b/arch/arm/mach-sa1100/pleb.c index 5606bd71b02..e17b58fb9c9 100644 --- a/arch/arm/mach-sa1100/pleb.c +++ b/arch/arm/mach-sa1100/pleb.c @@ -146,9 +146,11 @@ static void __init pleb_map_io(void) } MACHINE_START(PLEB, "PLEB") - BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000) - MAPIO(pleb_map_io) - INITIRQ(sa1100_init_irq) + .phys_ram = 0xc0000000, + .phys_io = 0x80000000, + .io_pg_offst = ((0xf8000000) >> 18) & 0xfffc, + .map_io = pleb_map_io, + .init_irq = sa1100_init_irq, .timer = &sa1100_timer, .init_machine = pleb_init, MACHINE_END diff --git a/arch/arm/mach-sa1100/shannon.c b/arch/arm/mach-sa1100/shannon.c index edddd559be0..43a00359fcd 100644 --- a/arch/arm/mach-sa1100/shannon.c +++ b/arch/arm/mach-sa1100/shannon.c @@ -76,10 +76,12 @@ static void __init shannon_map_io(void) } MACHINE_START(SHANNON, "Shannon (AKA: Tuxscreen)") - BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000) - BOOT_PARAMS(0xc0000100) - MAPIO(shannon_map_io) - INITIRQ(sa1100_init_irq) + .phys_ram = 0xc0000000, + .phys_io = 0x80000000, + .io_pg_offst = ((0xf8000000) >> 18) & 0xfffc, + .boot_params = 0xc0000100, + .map_io = shannon_map_io, + .init_irq = sa1100_init_irq, .timer = &sa1100_timer, .init_machine = shannon_init, MACHINE_END diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c index 8d113d62986..77978586b12 100644 --- a/arch/arm/mach-sa1100/simpad.c +++ b/arch/arm/mach-sa1100/simpad.c @@ -215,10 +215,12 @@ arch_initcall(simpad_init); MACHINE_START(SIMPAD, "Simpad") - MAINTAINER("Holger Freyther") - BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000) - BOOT_PARAMS(0xc0000100) - MAPIO(simpad_map_io) - INITIRQ(sa1100_init_irq) + /* Maintainer: Holger Freyther */ + .phys_ram = 0xc0000000, + .phys_io = 0x80000000, + .io_pg_offst = ((0xf8000000) >> 18) & 0xfffc, + .boot_params = 0xc0000100, + .map_io = simpad_map_io, + .init_irq = sa1100_init_irq, .timer = &sa1100_timer, MACHINE_END diff --git a/arch/arm/mach-shark/core.c b/arch/arm/mach-shark/core.c index aa0e2f6e02f..726445895b5 100644 --- a/arch/arm/mach-shark/core.c +++ b/arch/arm/mach-shark/core.c @@ -105,10 +105,12 @@ static struct sys_timer shark_timer = { }; MACHINE_START(SHARK, "Shark") - MAINTAINER("Alexander Schulz") - BOOT_MEM(0x08000000, 0x40000000, 0xe0000000) - BOOT_PARAMS(0x08003000) - MAPIO(shark_map_io) - INITIRQ(shark_init_irq) + /* Maintainer: Alexander Schulz */ + .phys_ram = 0x08000000, + .phys_io = 0x40000000, + .io_pg_offst = ((0xe0000000) >> 18) & 0xfffc, + .boot_params = 0x08003000, + .map_io = shark_map_io, + .init_irq = shark_init_irq, .timer = &shark_timer, MACHINE_END diff --git a/arch/arm/mach-versatile/versatile_ab.c b/arch/arm/mach-versatile/versatile_ab.c index d332084586c..8b0b3bef24a 100644 --- a/arch/arm/mach-versatile/versatile_ab.c +++ b/arch/arm/mach-versatile/versatile_ab.c @@ -35,11 +35,13 @@ #include "core.h" MACHINE_START(VERSATILE_AB, "ARM-Versatile AB") - MAINTAINER("ARM Ltd/Deep Blue Solutions Ltd") - BOOT_MEM(0x00000000, 0x101f1000, 0xf11f1000) - BOOT_PARAMS(0x00000100) - MAPIO(versatile_map_io) - INITIRQ(versatile_init_irq) + /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ + .phys_ram = 0x00000000, + .phys_io = 0x101f1000, + .io_pg_offst = ((0xf11f1000) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .map_io = versatile_map_io, + .init_irq = versatile_init_irq, .timer = &versatile_timer, - INIT_MACHINE(versatile_init) + .init_machine = versatile_init, MACHINE_END diff --git a/arch/arm/mach-versatile/versatile_pb.c b/arch/arm/mach-versatile/versatile_pb.c index 2702099a68f..7c3078c3891 100644 --- a/arch/arm/mach-versatile/versatile_pb.c +++ b/arch/arm/mach-versatile/versatile_pb.c @@ -99,11 +99,13 @@ static int __init versatile_pb_init(void) arch_initcall(versatile_pb_init); MACHINE_START(VERSATILE_PB, "ARM-Versatile PB") - MAINTAINER("ARM Ltd/Deep Blue Solutions Ltd") - BOOT_MEM(0x00000000, 0x101f1000, 0xf11f1000) - BOOT_PARAMS(0x00000100) - MAPIO(versatile_map_io) - INITIRQ(versatile_init_irq) + /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ + .phys_ram = 0x00000000, + .phys_io = 0x101f1000, + .io_pg_offst = ((0xf11f1000) >> 18) & 0xfffc, + .boot_params = 0x00000100, + .map_io = versatile_map_io, + .init_irq = versatile_init_irq, .timer = &versatile_timer, - INIT_MACHINE(versatile_init) + .init_machine = versatile_init, MACHINE_END -- cgit v1.2.3 From 0d670b413f042eccdffc45bafb9840244752707f Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Sun, 3 Jul 2005 17:53:25 +0100 Subject: [PATCH] ARM: 2784/1: Fix the block cache flush operation range Patch from Catalin Marinas The range for the ARMv6 block cache operations is inclusive but the kernel doesn't re-calculate the end address, causing a page fault when used (this only happens with support for cache aliasing, otherwise the blk_flush_kern_dcache_page() is not called). This patch subtracts L1_CACHE_BYTES from the end address. Signed-off-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/mm/blockops.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/mm/blockops.c b/arch/arm/mm/blockops.c index 806c6eeb1b0..4f5ee2d0899 100644 --- a/arch/arm/mm/blockops.c +++ b/arch/arm/mm/blockops.c @@ -25,13 +25,14 @@ blk_flush_kern_dcache_page(void *kaddr) { asm( "add r1, r0, %0 \n\ + sub r1, r1, %1 \n\ 1: .word 0xec401f0e @ mcrr p15, 0, r0, r1, c14, 0 @ blocking \n\ mov r0, #0 \n\ mcr p15, 0, r0, c7, c5, 0 \n\ mcr p15, 0, r0, c7, c10, 4 \n\ mov pc, lr" : - : "I" (PAGE_SIZE)); + : "I" (PAGE_SIZE), "I" (L1_CACHE_BYTES)); } /* -- cgit v1.2.3 From f9bd6ea446946b97208f9e1528eb5f9ef8f931cb Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 4 Jul 2005 10:43:36 +0100 Subject: [PATCH] ARM: Change 'param_offset' to 'boot_params' Signed-off-by: Russell King --- arch/arm/kernel/setup.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 35b7273cfdb..c9b69771f92 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -737,8 +737,8 @@ void __init setup_arch(char **cmdline_p) if (mdesc->soft_reboot) reboot_setup("s"); - if (mdesc->param_offset) - tags = phys_to_virt(mdesc->param_offset); + if (mdesc->boot_params) + tags = phys_to_virt(mdesc->boot_params); /* * If we have the old style parameters, convert them to -- cgit v1.2.3 From 68070bdeeca7b7af6a42c0b3e5b1247e83c22ff9 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 4 Jul 2005 10:44:34 +0100 Subject: [PATCH] ARM: Fix non-standard PXA io_pg_offst initialisers These didn't match my sed expression correctly, fix them up manually. Signed-off-by: Russell King --- arch/arm/mach-pxa/corgi.c | 6 +++--- arch/arm/mach-pxa/idp.c | 2 +- arch/arm/mach-pxa/lubbock.c | 2 +- arch/arm/mach-pxa/mainstone.c | 2 +- arch/arm/mach-pxa/poodle.c | 2 +- 5 files changed, 7 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index 276431bf1ce..86b862f56e7 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -289,7 +289,7 @@ static void __init corgi_map_io(void) MACHINE_START(CORGI, "SHARP Corgi") .phys_ram = 0xa0000000, .phys_io = 0x40000000, - .io_pg_offst = ((io_p2v(0x40000000) >> 18) & 0xfffc,) + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .fixup = fixup_corgi, .map_io = corgi_map_io, .init_irq = corgi_init_irq, @@ -302,7 +302,7 @@ MACHINE_END MACHINE_START(SHEPHERD, "SHARP Shepherd") .phys_ram = 0xa0000000, .phys_io = 0x40000000, - .io_pg_offst = ((io_p2v(0x40000000) >> 18) & 0xfffc,) + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .fixup = fixup_corgi, .map_io = corgi_map_io, .init_irq = corgi_init_irq, @@ -315,7 +315,7 @@ MACHINE_END MACHINE_START(HUSKY, "SHARP Husky") .phys_ram = 0xa0000000, .phys_io = 0x40000000, - .io_pg_offst = ((io_p2v(0x40000000) >> 18) & 0xfffc,) + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .fixup = fixup_corgi, .map_io = corgi_map_io, .init_irq = corgi_init_irq, diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c index f82f5aad560..386e107b53c 100644 --- a/arch/arm/mach-pxa/idp.c +++ b/arch/arm/mach-pxa/idp.c @@ -184,7 +184,7 @@ MACHINE_START(PXA_IDP, "Vibren PXA255 IDP") /* Maintainer: Vibren Technologies */ .phys_ram = 0xa0000000, .phys_io = 0x40000000, - .io_pg_offst = ((io_p2v(0x40000000) >> 18) & 0xfffc,) + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .map_io = idp_map_io, .init_irq = idp_init_irq, .timer = &pxa_timer, diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index e30b7c62270..6309853b59b 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -271,7 +271,7 @@ MACHINE_START(LUBBOCK, "Intel DBPXA250 Development Platform (aka Lubbock)") /* Maintainer: MontaVista Software Inc. */ .phys_ram = 0xa0000000, .phys_io = 0x40000000, - .io_pg_offst = ((io_p2v(0x40000000) >> 18) & 0xfffc,) + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .map_io = lubbock_map_io, .init_irq = lubbock_init_irq, .timer = &pxa_timer, diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index 5d2f76b6df0..827b7b5a5be 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -348,7 +348,7 @@ MACHINE_START(MAINSTONE, "Intel HCDDBBVA0 Development Platform (aka Mainstone)") /* Maintainer: MontaVista Software Inc. */ .phys_ram = 0xa0000000, .phys_io = 0x40000000, - .io_pg_offst = ((io_p2v(0x40000000) >> 18) & 0xfffc,) + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .map_io = mainstone_map_io, .init_irq = mainstone_init_irq, .timer = &pxa_timer, diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index ebae969e883..0e4f6fab100 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -182,7 +182,7 @@ static void __init poodle_map_io(void) MACHINE_START(POODLE, "SHARP Poodle") .phys_ram = 0xa0000000, .phys_io = 0x40000000, - .io_pg_offst = ((io_p2v(0x40000000) >> 18) & 0xfffc,) + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, .fixup = fixup_poodle, .map_io = poodle_map_io, .init_irq = pxa_init_irq, -- cgit v1.2.3 From e7270dec080002d8aa18256c756af6c32331ef48 Mon Sep 17 00:00:00 2001 From: Raphael Assenat Date: Mon, 4 Jul 2005 13:23:45 -0700 Subject: [SPARC64/COMPAT]: Add some compat ioctl for ppdev The following patch adds some ioctls to include/linux/compat_ioctl.h to allow using ppdev from the 32 bit user space on sparc64. This patch also adds the PPDEV option in the sparc64 menu, near Parallel printer support in the 'General machine setup' submenu. All those ioctls seem to be compatible, since (correct me if I'm wrong) they dont use the 'long' type. See include/linux/ppdev.h. The application I used to test the new ioctls only used the following: PPEXCL PPCLAIM PPNEGOT PPGETMODES PPRCONTROL PPWCONTROL PPDATADIR PPWDATA PPRDATA But I beleive that the other ioctls will work fine. Signed-off-by: David S. Miller --- arch/sparc64/Kconfig | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'arch') diff --git a/arch/sparc64/Kconfig b/arch/sparc64/Kconfig index e2b050eb3b9..d78bc13ebbb 100644 --- a/arch/sparc64/Kconfig +++ b/arch/sparc64/Kconfig @@ -444,6 +444,24 @@ config PRINTER If you have more than 8 printers, you need to increase the LP_NO macro in lp.c and the PARPORT_MAX macro in parport.h. +config PPDEV + tristate "Support for user-space parallel port device drivers" + depends on PARPORT + ---help--- + Saying Y to this adds support for /dev/parport device nodes. This + is needed for programs that want portable access to the parallel + port, for instance deviceid (which displays Plug-and-Play device + IDs). + + This is the parallel port equivalent of SCSI generic support (sg). + It is safe to say N to this -- it is not needed for normal printing + or parallel port CD-ROM/disk support. + + To compile this driver as a module, choose M here: the + module will be called ppdev. + + If unsure, say N. + config ENVCTRL tristate "SUNW, envctrl support" depends on PCI -- cgit v1.2.3 From 088dd1f81b3577c17c4c4381696bf2105ea0e43a Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 4 Jul 2005 13:24:38 -0700 Subject: [SPARC64]: Add support for IRQ pre-handlers. This allows a PCI controller to shim into IRQ delivery so that DMA queues can be drained, if necessary. If some bus specific code needs to run before an IRQ handler is invoked, the bus driver simply needs to setup the function pointer in bucket->irq_info->pre_handler and the two args bucket->irq_info->pre_handler_arg[12]. The Schizo PCI driver is converted over to use a pre-handler for the DMA write-sync processing it needs when a device is behind a PCI->PCI bus deeper than the top-level APB bridges. While we're here, clean up all of the action allocation and handling. Now, we allocate the irqaction as part of the bucket->irq_info area. There is an array of 4 irqaction (for PCI irq sharing) and a bitmask saying which entries are active. The bucket->irq_info is allocated at build_irq() time, not at request_irq() time. This simplifies request_irq() and free_irq() tremendously. The SMP dynamic IRQ retargetting code got removed in this change too. It was disabled for a few months now, and we can resurrect it in the future if we want. Signed-off-by: David S. Miller --- arch/sparc64/kernel/entry.S | 21 +- arch/sparc64/kernel/irq.c | 581 ++++++++++++++-------------------------- arch/sparc64/kernel/pci_sabre.c | 46 ++-- arch/sparc64/kernel/time.c | 2 +- 4 files changed, 227 insertions(+), 423 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/entry.S b/arch/sparc64/kernel/entry.S index eee516a71c1..d3973d8a719 100644 --- a/arch/sparc64/kernel/entry.S +++ b/arch/sparc64/kernel/entry.S @@ -553,13 +553,11 @@ do_ivec: sllx %g3, 5, %g3 or %g2, %lo(ivector_table), %g2 add %g2, %g3, %g3 - ldx [%g3 + 0x08], %g2 /* irq_info */ ldub [%g3 + 0x04], %g4 /* pil */ - brz,pn %g2, do_ivec_spurious - mov 1, %g2 - + mov 1, %g2 sllx %g2, %g4, %g2 sllx %g4, 2, %g4 + lduw [%g6 + %g4], %g5 /* g5 = irq_work(cpu, pil) */ stw %g5, [%g3 + 0x00] /* bucket->irq_chain = g5 */ stw %g3, [%g6 + %g4] /* irq_work(cpu, pil) = bucket */ @@ -567,9 +565,9 @@ do_ivec: retry do_ivec_xcall: mov 0x50, %g1 - ldxa [%g1 + %g0] ASI_INTR_R, %g1 srl %g3, 0, %g3 + mov 0x60, %g7 ldxa [%g7 + %g0] ASI_INTR_R, %g7 stxa %g0, [%g0] ASI_INTR_RECEIVE @@ -581,19 +579,6 @@ do_ivec_xcall: 1: jmpl %g3, %g0 nop -do_ivec_spurious: - stw %g3, [%g6 + 0x00] /* irq_work(cpu, 0) = bucket */ - rdpr %pstate, %g5 - - wrpr %g5, PSTATE_IG | PSTATE_AG, %pstate - sethi %hi(109f), %g7 - ba,pt %xcc, etrap -109: or %g7, %lo(109b), %g7 - call catch_disabled_ivec - add %sp, PTREGS_OFF, %o0 - ba,pt %xcc, rtrap - clr %l6 - .globl save_alternate_globals save_alternate_globals: /* %o0 = save_area */ rdpr %pstate, %o5 diff --git a/arch/sparc64/kernel/irq.c b/arch/sparc64/kernel/irq.c index 42471257730..74a2e0808cb 100644 --- a/arch/sparc64/kernel/irq.c +++ b/arch/sparc64/kernel/irq.c @@ -71,31 +71,7 @@ struct irq_work_struct { struct irq_work_struct __irq_work[NR_CPUS]; #define irq_work(__cpu, __pil) &(__irq_work[(__cpu)].irq_worklists[(__pil)]) -#ifdef CONFIG_PCI -/* This is a table of physical addresses used to deal with IBF_DMA_SYNC. - * It is used for PCI only to synchronize DMA transfers with IRQ delivery - * for devices behind busses other than APB on Sabre systems. - * - * Currently these physical addresses are just config space accesses - * to the command register for that device. - */ -unsigned long pci_dma_wsync; -unsigned long dma_sync_reg_table[256]; -unsigned char dma_sync_reg_table_entry = 0; -#endif - -/* This is based upon code in the 32-bit Sparc kernel written mostly by - * David Redman (djhr@tadpole.co.uk). - */ -#define MAX_STATIC_ALLOC 4 -static struct irqaction static_irqaction[MAX_STATIC_ALLOC]; -static int static_irq_count; - -/* This is exported so that fast IRQ handlers can get at it... -DaveM */ -struct irqaction *irq_action[NR_IRQS+1] = { - NULL, NULL, NULL, NULL, NULL, NULL , NULL, NULL, - NULL, NULL, NULL, NULL, NULL, NULL , NULL, NULL -}; +static struct irqaction *irq_action[NR_IRQS+1]; /* This only synchronizes entities which modify IRQ handler * state and some selected user-level spots that want to @@ -241,17 +217,22 @@ void disable_irq(unsigned int irq) * the CPU %tick register and not by some normal vectored interrupt * source. To handle this special case, we use this dummy INO bucket. */ +static struct irq_desc pil0_dummy_desc; static struct ino_bucket pil0_dummy_bucket = { - 0, /* irq_chain */ - 0, /* pil */ - 0, /* pending */ - 0, /* flags */ - 0, /* __unused */ - NULL, /* irq_info */ - 0UL, /* iclr */ - 0UL, /* imap */ + .irq_info = &pil0_dummy_desc, }; +static void build_irq_error(const char *msg, unsigned int ino, int pil, int inofixup, + unsigned long iclr, unsigned long imap, + struct ino_bucket *bucket) +{ + prom_printf("IRQ: INO %04x (%d:%016lx:%016lx) --> " + "(%d:%d:%016lx:%016lx), halting...\n", + ino, bucket->pil, bucket->iclr, bucket->imap, + pil, inofixup, iclr, imap); + prom_halt(); +} + unsigned int build_irq(int pil, int inofixup, unsigned long iclr, unsigned long imap) { struct ino_bucket *bucket; @@ -280,28 +261,35 @@ unsigned int build_irq(int pil, int inofixup, unsigned long iclr, unsigned long prom_halt(); } - /* Ok, looks good, set it up. Don't touch the irq_chain or - * the pending flag. - */ bucket = &ivector_table[ino]; - if ((bucket->flags & IBF_ACTIVE) || - (bucket->irq_info != NULL)) { - /* This is a gross fatal error if it happens here. */ - prom_printf("IRQ: Trying to reinit INO bucket, fatal error.\n"); - prom_printf("IRQ: Request INO %04x (%d:%d:%016lx:%016lx)\n", - ino, pil, inofixup, iclr, imap); - prom_printf("IRQ: Existing (%d:%016lx:%016lx)\n", - bucket->pil, bucket->iclr, bucket->imap); - prom_printf("IRQ: Cannot continue, halting...\n"); + if (bucket->flags & IBF_ACTIVE) + build_irq_error("IRQ: Trying to build active INO bucket.\n", + ino, pil, inofixup, iclr, imap, bucket); + + if (bucket->irq_info) { + if (bucket->imap != imap || bucket->iclr != iclr) + build_irq_error("IRQ: Trying to reinit INO bucket.\n", + ino, pil, inofixup, iclr, imap, bucket); + + goto out; + } + + bucket->irq_info = kmalloc(sizeof(struct irq_desc), GFP_ATOMIC); + if (!bucket->irq_info) { + prom_printf("IRQ: Error, kmalloc(irq_desc) failed.\n"); prom_halt(); } + memset(bucket->irq_info, 0, sizeof(struct irq_desc)); + + /* Ok, looks good, set it up. Don't touch the irq_chain or + * the pending flag. + */ bucket->imap = imap; bucket->iclr = iclr; bucket->pil = pil; bucket->flags = 0; - bucket->irq_info = NULL; - +out: return __irq(bucket); } @@ -319,26 +307,65 @@ static void atomic_bucket_insert(struct ino_bucket *bucket) __asm__ __volatile__("wrpr %0, 0x0, %%pstate" : : "r" (pstate)); } +static int check_irq_sharing(int pil, unsigned long irqflags) +{ + struct irqaction *action, *tmp; + + action = *(irq_action + pil); + if (action) { + if ((action->flags & SA_SHIRQ) && (irqflags & SA_SHIRQ)) { + for (tmp = action; tmp->next; tmp = tmp->next) + ; + } else { + return -EBUSY; + } + } + return 0; +} + +static void append_irq_action(int pil, struct irqaction *action) +{ + struct irqaction **pp = irq_action + pil; + + while (*pp) + pp = &((*pp)->next); + *pp = action; +} + +static struct irqaction *get_action_slot(struct ino_bucket *bucket) +{ + struct irq_desc *desc = bucket->irq_info; + int max_irq, i; + + max_irq = 1; + if (bucket->flags & IBF_PCI) + max_irq = MAX_IRQ_DESC_ACTION; + for (i = 0; i < max_irq; i++) { + struct irqaction *p = &desc->action[i]; + u32 mask = (1 << i); + + if (desc->action_active_mask & mask) + continue; + + desc->action_active_mask |= mask; + return p; + } + return NULL; +} + int request_irq(unsigned int irq, irqreturn_t (*handler)(int, void *, struct pt_regs *), unsigned long irqflags, const char *name, void *dev_id) { - struct irqaction *action, *tmp = NULL; + struct irqaction *action; struct ino_bucket *bucket = __bucket(irq); unsigned long flags; int pending = 0; - if ((bucket != &pil0_dummy_bucket) && - (bucket < &ivector_table[0] || - bucket >= &ivector_table[NUM_IVECS])) { - unsigned int *caller; - - __asm__ __volatile__("mov %%i7, %0" : "=r" (caller)); - printk(KERN_CRIT "request_irq: Old style IRQ registry attempt " - "from %p, irq %08x.\n", caller, irq); + if (unlikely(!handler)) return -EINVAL; - } - if (!handler) - return -EINVAL; + + if (unlikely(!bucket->irq_info)) + return -ENODEV; if ((bucket != &pil0_dummy_bucket) && (irqflags & SA_SAMPLE_RANDOM)) { /* @@ -356,93 +383,20 @@ int request_irq(unsigned int irq, irqreturn_t (*handler)(int, void *, struct pt_ spin_lock_irqsave(&irq_action_lock, flags); - action = *(bucket->pil + irq_action); - if (action) { - if ((action->flags & SA_SHIRQ) && (irqflags & SA_SHIRQ)) - for (tmp = action; tmp->next; tmp = tmp->next) - ; - else { - spin_unlock_irqrestore(&irq_action_lock, flags); - return -EBUSY; - } - action = NULL; /* Or else! */ + if (check_irq_sharing(bucket->pil, irqflags)) { + spin_unlock_irqrestore(&irq_action_lock, flags); + return -EBUSY; } - /* If this is flagged as statically allocated then we use our - * private struct which is never freed. - */ - if (irqflags & SA_STATIC_ALLOC) { - if (static_irq_count < MAX_STATIC_ALLOC) - action = &static_irqaction[static_irq_count++]; - else - printk("Request for IRQ%d (%s) SA_STATIC_ALLOC failed " - "using kmalloc\n", irq, name); - } - if (action == NULL) - action = (struct irqaction *)kmalloc(sizeof(struct irqaction), - GFP_ATOMIC); - + action = get_action_slot(bucket); if (!action) { spin_unlock_irqrestore(&irq_action_lock, flags); return -ENOMEM; } - if (bucket == &pil0_dummy_bucket) { - bucket->irq_info = action; - bucket->flags |= IBF_ACTIVE; - } else { - if ((bucket->flags & IBF_ACTIVE) != 0) { - void *orig = bucket->irq_info; - void **vector = NULL; - - if ((bucket->flags & IBF_PCI) == 0) { - printk("IRQ: Trying to share non-PCI bucket.\n"); - goto free_and_ebusy; - } - if ((bucket->flags & IBF_MULTI) == 0) { - vector = kmalloc(sizeof(void *) * 4, GFP_ATOMIC); - if (vector == NULL) - goto free_and_enomem; - - /* We might have slept. */ - if ((bucket->flags & IBF_MULTI) != 0) { - int ent; - - kfree(vector); - vector = (void **)bucket->irq_info; - for(ent = 0; ent < 4; ent++) { - if (vector[ent] == NULL) { - vector[ent] = action; - break; - } - } - if (ent == 4) - goto free_and_ebusy; - } else { - vector[0] = orig; - vector[1] = action; - vector[2] = NULL; - vector[3] = NULL; - bucket->irq_info = vector; - bucket->flags |= IBF_MULTI; - } - } else { - int ent; - - vector = (void **)orig; - for (ent = 0; ent < 4; ent++) { - if (vector[ent] == NULL) { - vector[ent] = action; - break; - } - } - if (ent == 4) - goto free_and_ebusy; - } - } else { - bucket->irq_info = action; - bucket->flags |= IBF_ACTIVE; - } + bucket->flags |= IBF_ACTIVE; + pending = 0; + if (bucket != &pil0_dummy_bucket) { pending = bucket->pending; if (pending) bucket->pending = 0; @@ -456,10 +410,7 @@ int request_irq(unsigned int irq, irqreturn_t (*handler)(int, void *, struct pt_ put_ino_in_irqaction(action, irq); put_smpaff_in_irqaction(action, CPU_MASK_NONE); - if (tmp) - tmp->next = action; - else - *(bucket->pil + irq_action) = action; + append_irq_action(bucket->pil, action); enable_irq(irq); @@ -468,147 +419,103 @@ int request_irq(unsigned int irq, irqreturn_t (*handler)(int, void *, struct pt_ atomic_bucket_insert(bucket); set_softint(1 << bucket->pil); } + spin_unlock_irqrestore(&irq_action_lock, flags); - if ((bucket != &pil0_dummy_bucket) && (!(irqflags & SA_STATIC_ALLOC))) + + if (bucket != &pil0_dummy_bucket) register_irq_proc(__irq_ino(irq)); #ifdef CONFIG_SMP distribute_irqs(); #endif return 0; - -free_and_ebusy: - kfree(action); - spin_unlock_irqrestore(&irq_action_lock, flags); - return -EBUSY; - -free_and_enomem: - kfree(action); - spin_unlock_irqrestore(&irq_action_lock, flags); - return -ENOMEM; } EXPORT_SYMBOL(request_irq); -void free_irq(unsigned int irq, void *dev_id) +static struct irqaction *unlink_irq_action(unsigned int irq, void *dev_id) { - struct irqaction *action; - struct irqaction *tmp = NULL; - unsigned long flags; - struct ino_bucket *bucket = __bucket(irq), *bp; - - if ((bucket != &pil0_dummy_bucket) && - (bucket < &ivector_table[0] || - bucket >= &ivector_table[NUM_IVECS])) { - unsigned int *caller; + struct ino_bucket *bucket = __bucket(irq); + struct irqaction *action, **pp; - __asm__ __volatile__("mov %%i7, %0" : "=r" (caller)); - printk(KERN_CRIT "free_irq: Old style IRQ removal attempt " - "from %p, irq %08x.\n", caller, irq); - return; - } - - spin_lock_irqsave(&irq_action_lock, flags); + pp = irq_action + bucket->pil; + action = *pp; + if (unlikely(!action)) + return NULL; - action = *(bucket->pil + irq_action); - if (!action->handler) { + if (unlikely(!action->handler)) { printk("Freeing free IRQ %d\n", bucket->pil); - return; - } - if (dev_id) { - for ( ; action; action = action->next) { - if (action->dev_id == dev_id) - break; - tmp = action; - } - if (!action) { - printk("Trying to free free shared IRQ %d\n", bucket->pil); - spin_unlock_irqrestore(&irq_action_lock, flags); - return; - } - } else if (action->flags & SA_SHIRQ) { - printk("Trying to free shared IRQ %d with NULL device ID\n", bucket->pil); - spin_unlock_irqrestore(&irq_action_lock, flags); - return; + return NULL; } - if (action->flags & SA_STATIC_ALLOC) { - printk("Attempt to free statically allocated IRQ %d (%s)\n", - bucket->pil, action->name); - spin_unlock_irqrestore(&irq_action_lock, flags); - return; + while (action && action->dev_id != dev_id) { + pp = &action->next; + action = *pp; } - if (action && tmp) - tmp->next = action->next; - else - *(bucket->pil + irq_action) = action->next; + if (likely(action)) + *pp = action->next; + + return action; +} + +void free_irq(unsigned int irq, void *dev_id) +{ + struct irqaction *action; + struct ino_bucket *bucket; + unsigned long flags; + + spin_lock_irqsave(&irq_action_lock, flags); + + action = unlink_irq_action(irq, dev_id); spin_unlock_irqrestore(&irq_action_lock, flags); + if (unlikely(!action)) + return; + synchronize_irq(irq); spin_lock_irqsave(&irq_action_lock, flags); + bucket = __bucket(irq); if (bucket != &pil0_dummy_bucket) { + struct irq_desc *desc = bucket->irq_info; unsigned long imap = bucket->imap; - void **vector, *orig; - int ent; - - orig = bucket->irq_info; - vector = (void **)orig; - - if ((bucket->flags & IBF_MULTI) != 0) { - int other = 0; - void *orphan = NULL; - for (ent = 0; ent < 4; ent++) { - if (vector[ent] == action) - vector[ent] = NULL; - else if (vector[ent] != NULL) { - orphan = vector[ent]; - other++; - } - } + int ent, i; - /* Only free when no other shared irq - * uses this bucket. - */ - if (other) { - if (other == 1) { - /* Convert back to non-shared bucket. */ - bucket->irq_info = orphan; - bucket->flags &= ~(IBF_MULTI); - kfree(vector); - } - goto out; + for (i = 0; i < MAX_IRQ_DESC_ACTION; i++) { + struct irqaction *p = &desc->action[i]; + + if (p == action) { + desc->action_active_mask &= ~(1 << i); + break; } - } else { - bucket->irq_info = NULL; } - /* This unique interrupt source is now inactive. */ - bucket->flags &= ~IBF_ACTIVE; + if (!desc->action_active_mask) { + /* This unique interrupt source is now inactive. */ + bucket->flags &= ~IBF_ACTIVE; - /* See if any other buckets share this bucket's IMAP - * and are still active. - */ - for (ent = 0; ent < NUM_IVECS; ent++) { - bp = &ivector_table[ent]; - if (bp != bucket && - bp->imap == imap && - (bp->flags & IBF_ACTIVE) != 0) - break; - } + /* See if any other buckets share this bucket's IMAP + * and are still active. + */ + for (ent = 0; ent < NUM_IVECS; ent++) { + struct ino_bucket *bp = &ivector_table[ent]; + if (bp != bucket && + bp->imap == imap && + (bp->flags & IBF_ACTIVE) != 0) + break; + } - /* Only disable when no other sub-irq levels of - * the same IMAP are active. - */ - if (ent == NUM_IVECS) - disable_irq(irq); + /* Only disable when no other sub-irq levels of + * the same IMAP are active. + */ + if (ent == NUM_IVECS) + disable_irq(irq); + } } -out: - kfree(action); spin_unlock_irqrestore(&irq_action_lock, flags); } @@ -647,99 +554,55 @@ void synchronize_irq(unsigned int irq) } #endif /* CONFIG_SMP */ -void catch_disabled_ivec(struct pt_regs *regs) -{ - int cpu = smp_processor_id(); - struct ino_bucket *bucket = __bucket(*irq_work(cpu, 0)); - - /* We can actually see this on Ultra/PCI PCI cards, which are bridges - * to other devices. Here a single IMAP enabled potentially multiple - * unique interrupt sources (which each do have a unique ICLR register. - * - * So what we do is just register that the IVEC arrived, when registered - * for real the request_irq() code will check the bit and signal - * a local CPU interrupt for it. - */ -#if 0 - printk("IVEC: Spurious interrupt vector (%x) received at (%016lx)\n", - bucket - &ivector_table[0], regs->tpc); -#endif - *irq_work(cpu, 0) = 0; - bucket->pending = 1; -} - -/* Tune this... */ -#define FORWARD_VOLUME 12 - -#ifdef CONFIG_SMP - -static inline void redirect_intr(int cpu, struct ino_bucket *bp) +static void process_bucket(int irq, struct ino_bucket *bp, struct pt_regs *regs) { - /* Ok, here is what is going on: - * 1) Retargeting IRQs on Starfire is very - * expensive so just forget about it on them. - * 2) Moving around very high priority interrupts - * is a losing game. - * 3) If the current cpu is idle, interrupts are - * useful work, so keep them here. But do not - * pass to our neighbour if he is not very idle. - * 4) If sysadmin explicitly asks for directed intrs, - * Just Do It. - */ - struct irqaction *ap = bp->irq_info; - cpumask_t cpu_mask; - unsigned int buddy, ticks; + struct irq_desc *desc = bp->irq_info; + unsigned char flags = bp->flags; + u32 action_mask, i; + int random; - cpu_mask = get_smpaff_in_irqaction(ap); - cpus_and(cpu_mask, cpu_mask, cpu_online_map); - if (cpus_empty(cpu_mask)) - cpu_mask = cpu_online_map; + bp->flags |= IBF_INPROGRESS; - if (this_is_starfire != 0 || - bp->pil >= 10 || current->pid == 0) + if (unlikely(!(flags & IBF_ACTIVE))) { + bp->pending = 1; goto out; - - /* 'cpu' is the MID (ie. UPAID), calculate the MID - * of our buddy. - */ - buddy = cpu + 1; - if (buddy >= NR_CPUS) - buddy = 0; - - ticks = 0; - while (!cpu_isset(buddy, cpu_mask)) { - if (++buddy >= NR_CPUS) - buddy = 0; - if (++ticks > NR_CPUS) { - put_smpaff_in_irqaction(ap, CPU_MASK_NONE); - goto out; - } } - if (buddy == cpu) - goto out; + if (desc->pre_handler) + desc->pre_handler(bp, + desc->pre_handler_arg1, + desc->pre_handler_arg2); - /* Voo-doo programming. */ - if (cpu_data(buddy).idle_volume < FORWARD_VOLUME) - goto out; + action_mask = desc->action_active_mask; + random = 0; + for (i = 0; i < MAX_IRQ_DESC_ACTION; i++) { + struct irqaction *p = &desc->action[i]; + u32 mask = (1 << i); - /* This just so happens to be correct on Cheetah - * at the moment. - */ - buddy <<= 26; + if (!(action_mask & mask)) + continue; + + action_mask &= ~mask; - /* Push it to our buddy. */ - upa_writel(buddy | IMAP_VALID, bp->imap); + if (p->handler(__irq(bp), p->dev_id, regs) == IRQ_HANDLED) + random |= p->flags; + if (!action_mask) + break; + } + if (bp->pil != 0) { + upa_writel(ICLR_IDLE, bp->iclr); + /* Test and add entropy */ + if (random & SA_SAMPLE_RANDOM) + add_interrupt_randomness(irq); + } out: - return; + bp->flags &= ~IBF_INPROGRESS; } -#endif - void handler_irq(int irq, struct pt_regs *regs) { - struct ino_bucket *bp, *nbp; + struct ino_bucket *bp; int cpu = smp_processor_id(); #ifndef CONFIG_SMP @@ -757,8 +620,6 @@ void handler_irq(int irq, struct pt_regs *regs) clear_softint(clr_mask); } #else - int should_forward = 0; - clear_softint(1 << irq); #endif @@ -773,63 +634,12 @@ void handler_irq(int irq, struct pt_regs *regs) #else bp = __bucket(xchg32(irq_work(cpu, irq), 0)); #endif - for ( ; bp != NULL; bp = nbp) { - unsigned char flags = bp->flags; - unsigned char random = 0; + while (bp) { + struct ino_bucket *nbp = __bucket(bp->irq_chain); - nbp = __bucket(bp->irq_chain); bp->irq_chain = 0; - - bp->flags |= IBF_INPROGRESS; - - if ((flags & IBF_ACTIVE) != 0) { -#ifdef CONFIG_PCI - if ((flags & IBF_DMA_SYNC) != 0) { - upa_readl(dma_sync_reg_table[bp->synctab_ent]); - upa_readq(pci_dma_wsync); - } -#endif - if ((flags & IBF_MULTI) == 0) { - struct irqaction *ap = bp->irq_info; - int ret; - - ret = ap->handler(__irq(bp), ap->dev_id, regs); - if (ret == IRQ_HANDLED) - random |= ap->flags; - } else { - void **vector = (void **)bp->irq_info; - int ent; - for (ent = 0; ent < 4; ent++) { - struct irqaction *ap = vector[ent]; - if (ap != NULL) { - int ret; - - ret = ap->handler(__irq(bp), - ap->dev_id, - regs); - if (ret == IRQ_HANDLED) - random |= ap->flags; - } - } - } - /* Only the dummy bucket lacks IMAP/ICLR. */ - if (bp->pil != 0) { -#ifdef CONFIG_SMP - if (should_forward) { - redirect_intr(cpu, bp); - should_forward = 0; - } -#endif - upa_writel(ICLR_IDLE, bp->iclr); - - /* Test and add entropy */ - if (random & SA_SAMPLE_RANDOM) - add_interrupt_randomness(irq); - } - } else - bp->pending = 1; - - bp->flags &= ~IBF_INPROGRESS; + process_bucket(irq, bp, regs); + bp = nbp; } irq_exit(); } @@ -959,7 +769,10 @@ static void distribute_irqs(void) */ for (level = 1; level < NR_IRQS; level++) { struct irqaction *p = irq_action[level]; - if (level == 12) continue; + + if (level == 12) + continue; + while(p) { cpu = retarget_one_irq(p, cpu); p = p->next; diff --git a/arch/sparc64/kernel/pci_sabre.c b/arch/sparc64/kernel/pci_sabre.c index 53d333b4a4e..52bf3431a42 100644 --- a/arch/sparc64/kernel/pci_sabre.c +++ b/arch/sparc64/kernel/pci_sabre.c @@ -595,6 +595,23 @@ static int __init sabre_ino_to_pil(struct pci_dev *pdev, unsigned int ino) return ret; } +/* When a device lives behind a bridge deeper in the PCI bus topology + * than APB, a special sequence must run to make sure all pending DMA + * transfers at the time of IRQ delivery are visible in the coherency + * domain by the cpu. This sequence is to perform a read on the far + * side of the non-APB bridge, then perform a read of Sabre's DMA + * write-sync register. + */ +static void sabre_wsync_handler(struct ino_bucket *bucket, void *_arg1, void *_arg2) +{ + struct pci_dev *pdev = _arg1; + unsigned long sync_reg = (unsigned long) _arg2; + u16 _unused; + + pci_read_config_word(pdev, PCI_VENDOR_ID, &_unused); + sabre_read(sync_reg); +} + static unsigned int __init sabre_irq_build(struct pci_pbm_info *pbm, struct pci_dev *pdev, unsigned int ino) @@ -639,24 +656,14 @@ static unsigned int __init sabre_irq_build(struct pci_pbm_info *pbm, if (pdev) { struct pcidev_cookie *pcp = pdev->sysdata; - /* When a device lives behind a bridge deeper in the - * PCI bus topology than APB, a special sequence must - * run to make sure all pending DMA transfers at the - * time of IRQ delivery are visible in the coherency - * domain by the cpu. This sequence is to perform - * a read on the far side of the non-APB bridge, then - * perform a read of Sabre's DMA write-sync register. - * - * Currently, the PCI_CONFIG register for the device - * is used for this read from the far side of the bridge. - */ if (pdev->bus->number != pcp->pbm->pci_first_busno) { - bucket->flags |= IBF_DMA_SYNC; - bucket->synctab_ent = dma_sync_reg_table_entry++; - dma_sync_reg_table[bucket->synctab_ent] = - (unsigned long) sabre_pci_config_mkaddr( - pcp->pbm, - pdev->bus->number, pdev->devfn, PCI_COMMAND); + struct pci_controller_info *p = pcp->pbm->parent; + struct irq_desc *d = bucket->irq_info; + + d->pre_handler = sabre_wsync_handler; + d->pre_handler_arg1 = pdev; + d->pre_handler_arg2 = (void *) + p->pbm_A.controller_regs + SABRE_WRSYNC; } } return __irq(bucket); @@ -1626,10 +1633,9 @@ void __init sabre_init(int pnode, char *model_name) */ p->pbm_A.controller_regs = pr_regs[0].phys_addr; p->pbm_B.controller_regs = pr_regs[0].phys_addr; - pci_dma_wsync = p->pbm_A.controller_regs + SABRE_WRSYNC; - printk("PCI: Found SABRE, main regs at %016lx, wsync at %016lx\n", - p->pbm_A.controller_regs, pci_dma_wsync); + printk("PCI: Found SABRE, main regs at %016lx\n", + p->pbm_A.controller_regs); /* Clear interrupts */ diff --git a/arch/sparc64/kernel/time.c b/arch/sparc64/kernel/time.c index 71b4e380769..b40db389f90 100644 --- a/arch/sparc64/kernel/time.c +++ b/arch/sparc64/kernel/time.c @@ -973,7 +973,7 @@ static void sparc64_start_timers(irqreturn_t (*cfunc)(int, void *, struct pt_reg int err; /* Register IRQ handler. */ - err = request_irq(build_irq(0, 0, 0UL, 0UL), cfunc, SA_STATIC_ALLOC, + err = request_irq(build_irq(0, 0, 0UL, 0UL), cfunc, 0, "timer", NULL); if (err) { -- cgit v1.2.3 From bb6743f4f0aed5c1f09fa77cd8d3973c31792f4f Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 4 Jul 2005 13:26:04 -0700 Subject: [SPARC64]: Do proper DMA IRQ syncing on Tomatillo This was the main impetus behind adding the PCI IRQ shim. In order to properly order DMA writes wrt. interrupts, you have to write to a PCI controller register, then poll for that bit clearing. There is one bit for each interrupt source, and setting this register bit tells Tomatillo to drain all pending DMA from that device. Furthermore, Tomatillo's with revision less than 4 require us to do a block store due to some memory transaction ordering issues it has on JBUS. Signed-off-by: David S. Miller --- arch/sparc64/kernel/pci_schizo.c | 51 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 51 insertions(+) (limited to 'arch') diff --git a/arch/sparc64/kernel/pci_schizo.c b/arch/sparc64/kernel/pci_schizo.c index 5753175b94e..68b1a63a178 100644 --- a/arch/sparc64/kernel/pci_schizo.c +++ b/arch/sparc64/kernel/pci_schizo.c @@ -15,6 +15,7 @@ #include #include #include +#include #include "pci_impl.h" #include "iommu_common.h" @@ -326,6 +327,44 @@ static int __init schizo_ino_to_pil(struct pci_dev *pdev, unsigned int ino) return ret; } +static void tomatillo_wsync_handler(struct ino_bucket *bucket, void *_arg1, void *_arg2) +{ + unsigned long sync_reg = (unsigned long) _arg2; + u64 mask = 1 << (__irq_ino(__irq(bucket)) & IMAP_INO); + u64 val; + int limit; + + schizo_write(sync_reg, mask); + + limit = 100000; + val = 0; + while (--limit) { + val = schizo_read(sync_reg); + if (!(val & mask)) + break; + } + if (limit <= 0) { + printk("tomatillo_wsync_handler: DMA won't sync [%lx:%lx]\n", + val, mask); + } + + if (_arg1) { + static unsigned char cacheline[64] + __attribute__ ((aligned (64))); + + __asm__ __volatile__("rd %%fprs, %0\n\t" + "or %0, %4, %1\n\t" + "wr %1, 0x0, %%fprs\n\t" + "stda %%f0, [%5] %6\n\t" + "wr %0, 0x0, %%fprs\n\t" + "membar #Sync" + : "=&r" (mask), "=&r" (val) + : "0" (mask), "1" (val), + "i" (FPRS_FEF), "r" (&cacheline[0]), + "i" (ASI_BLK_COMMIT_P)); + } +} + static unsigned int schizo_irq_build(struct pci_pbm_info *pbm, struct pci_dev *pdev, unsigned int ino) @@ -369,6 +408,15 @@ static unsigned int schizo_irq_build(struct pci_pbm_info *pbm, bucket = __bucket(build_irq(pil, ign_fixup, iclr, imap)); bucket->flags |= IBF_PCI; + if (pdev && pbm->chip_type == PBM_CHIP_TYPE_TOMATILLO) { + struct irq_desc *p = bucket->irq_info; + + p->pre_handler = tomatillo_wsync_handler; + p->pre_handler_arg1 = ((pbm->chip_version <= 4) ? + (void *) 1 : (void *) 0); + p->pre_handler_arg2 = (void *) pbm->sync_reg; + } + return __irq(bucket); } @@ -2015,6 +2063,9 @@ static void __init schizo_pbm_init(struct pci_controller_info *p, pbm->pbm_regs = pr_regs[0].phys_addr; pbm->controller_regs = pr_regs[1].phys_addr - 0x10000UL; + if (chip_type == PBM_CHIP_TYPE_TOMATILLO) + pbm->sync_reg = pr_regs[3].phys_addr + 0x1a18UL; + sprintf(pbm->name, (chip_type == PBM_CHIP_TYPE_TOMATILLO ? "TOMATILLO%d PBM%c" : -- cgit v1.2.3 From 9fba62a59cf1407cd5495f6c61d22d169ca1553f Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 4 Jul 2005 14:53:33 -0700 Subject: [SPARC64]: Small Schizo PCI controller programming tweaks. Use macro instead of magic value for Tomatillo discard- timeout interrupt enable register bit. Leave OBP programming PTO value unless Tomatillo and version >= 0x2. If no-bus-parking property is present, explicitly clear PCICTRL_PARK bit. Signed-off-by: David S. Miller --- arch/sparc64/kernel/pci_schizo.c | 23 ++++++++--------------- 1 file changed, 8 insertions(+), 15 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/pci_schizo.c b/arch/sparc64/kernel/pci_schizo.c index 68b1a63a178..f4f68e150d7 100644 --- a/arch/sparc64/kernel/pci_schizo.c +++ b/arch/sparc64/kernel/pci_schizo.c @@ -933,6 +933,7 @@ static irqreturn_t schizo_ce_intr(int irq, void *dev_id, struct pt_regs *regs) #define SCHIZO_PCI_CTRL (0x2000UL) #define SCHIZO_PCICTRL_BUS_UNUS (1UL << 63UL) /* Safari */ +#define SCHIZO_PCICTRL_DTO_INT (1UL << 61UL) /* Tomatillo */ #define SCHIZO_PCICTRL_ARB_PRIO (0x1ff << 52UL) /* Tomatillo */ #define SCHIZO_PCICTRL_ESLCK (1UL << 51UL) /* Safari */ #define SCHIZO_PCICTRL_ERRSLOT (7UL << 48UL) /* Safari */ @@ -1939,33 +1940,25 @@ static void __init schizo_pbm_hw_init(struct pci_pbm_info *pbm) schizo_write(pbm->pbm_regs + SCHIZO_PCI_IRQ_RETRY, SCHIZO_IRQ_RETRY_INF); - /* Enable arbiter for all PCI slots. Also, disable PCI interval - * timer so that DTO (Discard TimeOuts) are not reported because - * some Schizo revisions report them erroneously. - */ tmp = schizo_read(pbm->pbm_regs + SCHIZO_PCI_CTRL); - if (pbm->chip_type == PBM_CHIP_TYPE_SCHIZO_PLUS && - pbm->chip_version == 0x5 && - pbm->chip_revision == 0x1) - tmp |= 0x0f; - else - tmp |= 0xff; - tmp &= ~SCHIZO_PCICTRL_PTO; + /* Enable arbiter for all PCI slots. */ + tmp |= 0xff; + if (pbm->chip_type == PBM_CHIP_TYPE_TOMATILLO && pbm->chip_version >= 0x2) tmp |= 0x3UL << SCHIZO_PCICTRL_PTO_SHIFT; - else - tmp |= 0x1UL << SCHIZO_PCICTRL_PTO_SHIFT; if (!prom_getbool(pbm->prom_node, "no-bus-parking")) tmp |= SCHIZO_PCICTRL_PARK; + else + tmp &= ~SCHIZO_PCICTRL_PARK; if (pbm->chip_type == PBM_CHIP_TYPE_TOMATILLO && pbm->chip_version <= 0x1) - tmp |= (1UL << 61); + tmp |= SCHIZO_PCICTRL_DTO_INT; else - tmp &= ~(1UL << 61); + tmp &= ~SCHIZO_PCICTRL_DTO_INT; if (pbm->chip_type == PBM_CHIP_TYPE_TOMATILLO) tmp |= (SCHIZO_PCICTRL_MRM_PREF | -- cgit v1.2.3 From 864ae180074931f3a28c84ea85aa8cfeca18bc4f Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 4 Jul 2005 15:58:19 -0700 Subject: [SPARC64]: Fix IRQ retry interval timer value on sparc64 PCI controllers. Use '5' instead of 'infinity'. Signed-off-by: David S. Miller --- arch/sparc64/kernel/pci_psycho.c | 3 +-- arch/sparc64/kernel/pci_schizo.c | 4 +--- 2 files changed, 2 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/kernel/pci_psycho.c b/arch/sparc64/kernel/pci_psycho.c index 534320ef0db..91ab466d6c6 100644 --- a/arch/sparc64/kernel/pci_psycho.c +++ b/arch/sparc64/kernel/pci_psycho.c @@ -1303,8 +1303,7 @@ static void psycho_controller_hwinit(struct pci_controller_info *p) { u64 tmp; - /* PROM sets the IRQ retry value too low, increase it. */ - psycho_write(p->pbm_A.controller_regs + PSYCHO_IRQ_RETRY, 0xff); + psycho_write(p->pbm_A.controller_regs + PSYCHO_IRQ_RETRY, 5); /* Enable arbiter for all PCI slots. */ tmp = psycho_read(p->pbm_A.controller_regs + PSYCHO_PCIA_CTRL); diff --git a/arch/sparc64/kernel/pci_schizo.c b/arch/sparc64/kernel/pci_schizo.c index f4f68e150d7..6a182bb6628 100644 --- a/arch/sparc64/kernel/pci_schizo.c +++ b/arch/sparc64/kernel/pci_schizo.c @@ -1936,9 +1936,7 @@ static void __init schizo_pbm_hw_init(struct pci_pbm_info *pbm) { u64 tmp; - /* Set IRQ retry to infinity. */ - schizo_write(pbm->pbm_regs + SCHIZO_PCI_IRQ_RETRY, - SCHIZO_IRQ_RETRY_INF); + schizo_write(pbm->pbm_regs + SCHIZO_PCI_IRQ_RETRY, 5); tmp = schizo_read(pbm->pbm_regs + SCHIZO_PCI_CTRL); -- cgit v1.2.3 From e6b6239f8e8e5bd9ba0192a854652abf14e28ce4 Mon Sep 17 00:00:00 2001 From: Andrei Konovalov Date: Tue, 5 Jul 2005 18:54:43 -0700 Subject: [PATCH] ppc32: add Freescale MPC885ADS board support This patch adds the Freescale MPC86xADS board support. The supported devices are SMC UART and 10Mbit ethernet on SCC1. The manual for the board says that it "is compatible with the MPC8xxFADS for software point of view". That's why this patch extends FADS instead of introducing a new platform. FEC is not supported as the "combined FCC/FEC ethernet driver" driver by Pantelis Antoniou should replace the current FEC driver. Signed-off-by: Gennadiy Kurtsman Signed-off-by: Andrei Konovalov Acked-by: Tom Rini Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ppc/8xx_io/enet.c | 52 ++- arch/ppc/Kconfig | 22 +- arch/ppc/configs/mpc86x_ads_defconfig | 633 ++++++++++++++++++++++++++++++++++ arch/ppc/configs/mpc885ads_defconfig | 622 +++++++++++++++++++++++++++++++++ arch/ppc/platforms/fads.h | 109 +++++- arch/ppc/platforms/mpc885ads.h | 92 +++++ 6 files changed, 1515 insertions(+), 15 deletions(-) create mode 100644 arch/ppc/configs/mpc86x_ads_defconfig create mode 100644 arch/ppc/configs/mpc885ads_defconfig create mode 100644 arch/ppc/platforms/mpc885ads.h (limited to 'arch') diff --git a/arch/ppc/8xx_io/enet.c b/arch/ppc/8xx_io/enet.c index 4ea7158e506..ece6a9fbe09 100644 --- a/arch/ppc/8xx_io/enet.c +++ b/arch/ppc/8xx_io/enet.c @@ -714,16 +714,24 @@ static int __init scc_enet_init(void) immap->im_ioport.iop_pcdat &= ~PC_ENET_LBK; /* Disable Loopback */ #endif /* PC_ENET_LBK */ - /* Configure port C pins to enable CLSN and RENA. +#ifdef PE_ENET_TCLK + /* Configure port E for TCLK and RCLK. */ - immap->im_ioport.iop_pcpar &= ~(PC_ENET_CLSN | PC_ENET_RENA); - immap->im_ioport.iop_pcdir &= ~(PC_ENET_CLSN | PC_ENET_RENA); - immap->im_ioport.iop_pcso |= (PC_ENET_CLSN | PC_ENET_RENA); - + cp->cp_pepar |= (PE_ENET_TCLK | PE_ENET_RCLK); + cp->cp_pedir &= ~(PE_ENET_TCLK | PE_ENET_RCLK); + cp->cp_peso &= ~(PE_ENET_TCLK | PE_ENET_RCLK); +#else /* Configure port A for TCLK and RCLK. */ immap->im_ioport.iop_papar |= (PA_ENET_TCLK | PA_ENET_RCLK); immap->im_ioport.iop_padir &= ~(PA_ENET_TCLK | PA_ENET_RCLK); +#endif + + /* Configure port C pins to enable CLSN and RENA. + */ + immap->im_ioport.iop_pcpar &= ~(PC_ENET_CLSN | PC_ENET_RENA); + immap->im_ioport.iop_pcdir &= ~(PC_ENET_CLSN | PC_ENET_RENA); + immap->im_ioport.iop_pcso |= (PC_ENET_CLSN | PC_ENET_RENA); /* Configure Serial Interface clock routing. * First, clear all SCC bits to zero, then set the ones we want. @@ -896,14 +904,18 @@ static int __init scc_enet_init(void) /* It is now OK to enable the Ethernet transmitter. * Unfortunately, there are board implementation differences here. */ -#if (!defined (PB_ENET_TENA) && defined (PC_ENET_TENA)) +#if (!defined (PB_ENET_TENA) && defined (PC_ENET_TENA) && !defined (PE_ENET_TENA)) immap->im_ioport.iop_pcpar |= PC_ENET_TENA; immap->im_ioport.iop_pcdir &= ~PC_ENET_TENA; -#elif ( defined (PB_ENET_TENA) && !defined (PC_ENET_TENA)) +#elif ( defined (PB_ENET_TENA) && !defined (PC_ENET_TENA) && !defined (PE_ENET_TENA)) cp->cp_pbpar |= PB_ENET_TENA; cp->cp_pbdir |= PB_ENET_TENA; +#elif ( !defined (PB_ENET_TENA) && !defined (PC_ENET_TENA) && defined (PE_ENET_TENA)) + cp->cp_pepar |= PE_ENET_TENA; + cp->cp_pedir &= ~PE_ENET_TENA; + cp->cp_peso |= PE_ENET_TENA; #else -#error Configuration Error: define exactly ONE of PB_ENET_TENA, PC_ENET_TENA +#error Configuration Error: define exactly ONE of PB_ENET_TENA, PC_ENET_TENA, PE_ENET_TENA #endif #if defined(CONFIG_RPXLITE) || defined(CONFIG_RPXCLASSIC) @@ -936,6 +948,29 @@ static int __init scc_enet_init(void) *((volatile uint *)BCSR1) &= ~BCSR1_ETHEN; #endif +#ifdef CONFIG_MPC885ADS + + /* Deassert PHY reset and enable the PHY. + */ + { + volatile uint __iomem *bcsr = ioremap(BCSR_ADDR, BCSR_SIZE); + uint tmp; + + tmp = in_be32(bcsr + 1 /* BCSR1 */); + tmp |= BCSR1_ETHEN; + out_be32(bcsr + 1, tmp); + tmp = in_be32(bcsr + 4 /* BCSR4 */); + tmp |= BCSR4_ETH10_RST; + out_be32(bcsr + 4, tmp); + iounmap(bcsr); + } + + /* On MPC885ADS SCC ethernet PHY defaults to the full duplex mode + * upon reset. SCC is set to half duplex by default. So this + * inconsistency should be better fixed by the software. + */ +#endif + dev->base_addr = (unsigned long)ep; #if 0 dev->name = "CPM_ENET"; @@ -969,3 +1004,4 @@ static int __init scc_enet_init(void) } module_init(scc_enet_init); + diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig index a7835cd3f51..23b0d2f662c 100644 --- a/arch/ppc/Kconfig +++ b/arch/ppc/Kconfig @@ -284,6 +284,9 @@ endmenu menu "Platform options" +config FADS + bool + choice prompt "8xx Machine Type" depends on 8xx @@ -399,8 +402,25 @@ config BSEIP 26MB DRAM, 4MB flash, Ethernet, a 16K-gate FPGA, USB, an LCD/video controller, and two RS232 ports. -config FADS +config MPC8XXFADS bool "FADS" + select FADS + +config MPC86XADS + bool "MPC86XADS" + help + MPC86x Application Development System by Freescale Semiconductor. + The MPC86xADS is meant to serve as a platform for s/w and h/w + development around the MPC86X processor families. + select FADS + +config MPC885ADS + bool "MPC885ADS" + help + Freescale Semiconductor MPC885 Application Development System (ADS). + Also known as DUET. + The MPC885ADS is meant to serve as a platform for s/w and h/w + development around the MPC885 processor family. config TQM823L bool "TQM823L" diff --git a/arch/ppc/configs/mpc86x_ads_defconfig b/arch/ppc/configs/mpc86x_ads_defconfig new file mode 100644 index 00000000000..f63c6f59d68 --- /dev/null +++ b/arch/ppc/configs/mpc86x_ads_defconfig @@ -0,0 +1,633 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.12-rc4 +# Tue Jun 14 13:36:35 2005 +# +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_HAVE_DEC_LOCK=y +CONFIG_PPC=y +CONFIG_PPC32=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +# CONFIG_CLEAN_COMPILE is not set +CONFIG_BROKEN=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +# CONFIG_HOTPLUG is not set +CONFIG_KOBJECT_UEVENT=y +# CONFIG_IKCONFIG is not set +CONFIG_EMBEDDED=y +# CONFIG_KALLSYMS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +# CONFIG_BASE_FULL is not set +CONFIG_FUTEX=y +# CONFIG_EPOLL is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +# CONFIG_SHMEM is not set +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_TINY_SHMEM=y +CONFIG_BASE_SMALL=1 + +# +# Loadable module support +# +CONFIG_MODULES=y +# CONFIG_MODULE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_KMOD is not set + +# +# Processor +# +# CONFIG_6xx is not set +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_POWER3 is not set +# CONFIG_POWER4 is not set +CONFIG_8xx=y +# CONFIG_E500 is not set +# CONFIG_MATH_EMULATION is not set +# CONFIG_CPU_FREQ is not set +CONFIG_EMBEDDEDBOOT=y +# CONFIG_PM is not set +CONFIG_NOT_COHERENT_CACHE=y + +# +# Platform options +# +CONFIG_FADS=y +# CONFIG_RPXLITE is not set +# CONFIG_RPXCLASSIC is not set +# CONFIG_BSEIP is not set +# CONFIG_MPC8XXFADS is not set +CONFIG_MPC86XADS=y +# CONFIG_TQM823L is not set +# CONFIG_TQM850L is not set +# CONFIG_TQM855L is not set +# CONFIG_TQM860L is not set +# CONFIG_FPS850L is not set +# CONFIG_SPD823TS is not set +# CONFIG_IVMS8 is not set +# CONFIG_IVML24 is not set +# CONFIG_SM850 is not set +# CONFIG_HERMES_PRO is not set +# CONFIG_IP860 is not set +# CONFIG_LWMON is not set +# CONFIG_PCU_E is not set +# CONFIG_CCM is not set +# CONFIG_LANTEC is not set +# CONFIG_MBX is not set +# CONFIG_WINCEPT is not set +# CONFIG_SMP is not set +# CONFIG_PREEMPT is not set +# CONFIG_HIGHMEM is not set +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +# CONFIG_CMDLINE_BOOL is not set +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +# CONFIG_PCI is not set +# CONFIG_PCI_DOMAINS is not set +# CONFIG_PCI_QSPAN is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0x80000000 +CONFIG_CONSISTENT_START=0xff100000 +CONFIG_CONSISTENT_SIZE=0x00200000 +CONFIG_BOOT_LOAD=0x00400000 + +# +# Device Drivers +# + +# +# Generic Driver Options +# +# CONFIG_STANDALONE is not set +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_RAM is not set +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_LBD is not set +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_SCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# + +# +# Macintosh device drivers +# + +# +# Networking support +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_IP_TCPDIAG=y +# CONFIG_IP_TCPDIAG_IPV6 is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_NETFILTER is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +# CONFIG_MII is not set +# CONFIG_OAKNET is not set + +# +# Ethernet (1000 Mbit) +# + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set +CONFIG_SOUND_GAMEPORT=y + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_SERIAL_CPM=y +CONFIG_SERIAL_CPM_CONSOLE=y +# CONFIG_SERIAL_CPM_SCC1 is not set +# CONFIG_SERIAL_CPM_SCC2 is not set +# CONFIG_SERIAL_CPM_SCC3 is not set +# CONFIG_SERIAL_CPM_SCC4 is not set +CONFIG_SERIAL_CPM_SMC1=y +# CONFIG_SERIAL_CPM_SMC2 is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_NVRAM is not set +# CONFIG_GEN_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Misc devices +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +# CONFIG_USB_ARCH_HAS_HCD is not set +# CONFIG_USB_ARCH_HAS_OHCI is not set + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_FS_XATTR is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set + +# +# XFS support +# +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_QUOTA is not set +# CONFIG_DNOTIFY is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +# CONFIG_DEVFS_FS is not set +# CONFIG_DEVPTS_FS_XATTR is not set +# CONFIG_TMPFS is not set +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V4=y +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# MPC8xx CPM Options +# +CONFIG_SCC_ENET=y +CONFIG_SCC1_ENET=y +# CONFIG_SCC2_ENET is not set +# CONFIG_SCC3_ENET is not set +# CONFIG_FEC_ENET is not set +# CONFIG_ENET_BIG_BUFFERS is not set + +# +# Generic MPC8xx Options +# +# CONFIG_8xx_COPYBACK is not set +# CONFIG_8xx_CPU6 is not set +CONFIG_NO_UCODE_PATCH=y +# CONFIG_USB_SOF_UCODE_PATCH is not set +# CONFIG_I2C_SPI_UCODE_PATCH is not set +# CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC32 is not set +# CONFIG_LIBCRC32C is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Hardware crypto devices +# diff --git a/arch/ppc/configs/mpc885ads_defconfig b/arch/ppc/configs/mpc885ads_defconfig new file mode 100644 index 00000000000..016f94d9325 --- /dev/null +++ b/arch/ppc/configs/mpc885ads_defconfig @@ -0,0 +1,622 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.12-rc6 +# Thu Jun 9 21:17:29 2005 +# +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_HAVE_DEC_LOCK=y +CONFIG_PPC=y +CONFIG_PPC32=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +# CONFIG_CLEAN_COMPILE is not set +CONFIG_BROKEN=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +CONFIG_HOTPLUG=y +CONFIG_KOBJECT_UEVENT=y +# CONFIG_IKCONFIG is not set +CONFIG_EMBEDDED=y +# CONFIG_KALLSYMS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +# CONFIG_EPOLL is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +# CONFIG_MODULES is not set + +# +# Processor +# +# CONFIG_6xx is not set +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_POWER3 is not set +# CONFIG_POWER4 is not set +CONFIG_8xx=y +# CONFIG_E500 is not set +# CONFIG_MATH_EMULATION is not set +# CONFIG_CPU_FREQ is not set +CONFIG_EMBEDDEDBOOT=y +# CONFIG_PM is not set +CONFIG_NOT_COHERENT_CACHE=y + +# +# Platform options +# +# CONFIG_RPXLITE is not set +# CONFIG_RPXCLASSIC is not set +# CONFIG_BSEIP is not set +# CONFIG_FADS is not set +CONFIG_MPC885ADS=y +# CONFIG_TQM823L is not set +# CONFIG_TQM850L is not set +# CONFIG_TQM855L is not set +# CONFIG_TQM860L is not set +# CONFIG_FPS850L is not set +# CONFIG_SPD823TS is not set +# CONFIG_IVMS8 is not set +# CONFIG_IVML24 is not set +# CONFIG_SM850 is not set +# CONFIG_HERMES_PRO is not set +# CONFIG_IP860 is not set +# CONFIG_LWMON is not set +# CONFIG_PCU_E is not set +# CONFIG_CCM is not set +# CONFIG_LANTEC is not set +# CONFIG_MBX is not set +# CONFIG_WINCEPT is not set +# CONFIG_SMP is not set +# CONFIG_PREEMPT is not set +# CONFIG_HIGHMEM is not set +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +# CONFIG_CMDLINE_BOOL is not set +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +# CONFIG_PCI is not set +# CONFIG_PCI_DOMAINS is not set +# CONFIG_PCI_QSPAN is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0x80000000 +CONFIG_CONSISTENT_START=0xff100000 +CONFIG_CONSISTENT_SIZE=0x00200000 +CONFIG_BOOT_LOAD=0x00400000 + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_RAM is not set +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_LBD is not set +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_SCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# + +# +# Macintosh device drivers +# + +# +# Networking support +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_IP_TCPDIAG=y +# CONFIG_IP_TCPDIAG_IPV6 is not set +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_OAKNET is not set + +# +# Ethernet (1000 Mbit) +# + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +CONFIG_PPP=y +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=y +CONFIG_PPP_SYNC_TTY=y +CONFIG_PPP_DEFLATE=y +# CONFIG_PPP_BSDCOMP is not set +# CONFIG_PPPOE is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_SERIAL_CPM=y +CONFIG_SERIAL_CPM_CONSOLE=y +# CONFIG_SERIAL_CPM_SCC1 is not set +# CONFIG_SERIAL_CPM_SCC2 is not set +# CONFIG_SERIAL_CPM_SCC3 is not set +# CONFIG_SERIAL_CPM_SCC4 is not set +CONFIG_SERIAL_CPM_SMC1=y +CONFIG_SERIAL_CPM_SMC2=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_NVRAM is not set +# CONFIG_GEN_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Misc devices +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +# CONFIG_USB_ARCH_HAS_HCD is not set +# CONFIG_USB_ARCH_HAS_OHCI is not set + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +# CONFIG_EXT2_FS_POSIX_ACL is not set +# CONFIG_EXT2_FS_SECURITY is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set + +# +# XFS support +# +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_QUOTA is not set +# CONFIG_DNOTIFY is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +# CONFIG_PROC_KCORE is not set +CONFIG_SYSFS=y +# CONFIG_DEVFS_FS is not set +# CONFIG_DEVPTS_FS_XATTR is not set +# CONFIG_TMPFS is not set +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# MPC8xx CPM Options +# +CONFIG_SCC_ENET=y +# CONFIG_SCC1_ENET is not set +# CONFIG_SCC2_ENET is not set +CONFIG_SCC3_ENET=y +# CONFIG_FEC_ENET is not set +# CONFIG_ENET_BIG_BUFFERS is not set + +# +# Generic MPC8xx Options +# +CONFIG_8xx_COPYBACK=y +CONFIG_8xx_CPU6=y +CONFIG_NO_UCODE_PATCH=y +# CONFIG_USB_SOF_UCODE_PATCH is not set +# CONFIG_I2C_SPI_UCODE_PATCH is not set +# CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set + +# +# Library routines +# +CONFIG_CRC_CCITT=y +# CONFIG_CRC32 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# diff --git a/arch/ppc/platforms/fads.h b/arch/ppc/platforms/fads.h index 632b8178ce6..b60c56450b6 100644 --- a/arch/ppc/platforms/fads.h +++ b/arch/ppc/platforms/fads.h @@ -3,7 +3,18 @@ * the Motorola 860T FADS board. Copied from the MBX stuff. * * Copyright (c) 1998 Dan Malek (dmalek@jlc.net) + * + * Added MPC86XADS support. + * The MPC86xADS manual says the board "is compatible with the MPC8xxFADS + * for SW point of view". This is 99% correct. + * + * Author: MontaVista Software, Inc. + * source@mvista.com + * 2005 (c) MontaVista Software, Inc. This file is licensed under the + * terms of the GNU General Public License version 2. This program is licensed + * "as is" without any warranty of any kind, whether express or implied. */ + #ifdef __KERNEL__ #ifndef __ASM_FADS_H__ #define __ASM_FADS_H__ @@ -12,18 +23,45 @@ #include +#if defined(CONFIG_MPC86XADS) + +/* U-Boot maps BCSR to 0xff080000 */ +#define BCSR_ADDR ((uint)0xff080000) + +/* MPC86XADS has one more CPLD and an additional BCSR. + */ +#define CFG_PHYDEV_ADDR ((uint)0xff0a0000) +#define BCSR5 ((uint)(CFG_PHYDEV_ADDR + 0x300)) + +#define BCSR5_T1_RST 0x10 +#define BCSR5_ATM155_RST 0x08 +#define BCSR5_ATM25_RST 0x04 +#define BCSR5_MII1_EN 0x02 +#define BCSR5_MII1_RST 0x01 + +/* There is no PHY link change interrupt */ +#define PHY_INTERRUPT (-1) + +#else /* FADS */ + /* Memory map is configured by the PROM startup. * I tried to follow the FADS manual, although the startup PROM * dictates this and we simply have to move some of the physical * addresses for Linux. */ #define BCSR_ADDR ((uint)0xff010000) + +/* PHY link change interrupt */ +#define PHY_INTERRUPT SIU_IRQ2 + +#endif /* CONFIG_MPC86XADS */ + #define BCSR_SIZE ((uint)(64 * 1024)) -#define BCSR0 ((uint)0xff010000) -#define BCSR1 ((uint)0xff010004) -#define BCSR2 ((uint)0xff010008) -#define BCSR3 ((uint)0xff01000c) -#define BCSR4 ((uint)0xff010010) +#define BCSR0 ((uint)(BCSR_ADDR + 0x00)) +#define BCSR1 ((uint)(BCSR_ADDR + 0x04)) +#define BCSR2 ((uint)(BCSR_ADDR + 0x08)) +#define BCSR3 ((uint)(BCSR_ADDR + 0x0c)) +#define BCSR4 ((uint)(BCSR_ADDR + 0x10)) #define IMAP_ADDR ((uint)0xff000000) #define IMAP_SIZE ((uint)(64 * 1024)) @@ -34,8 +72,17 @@ /* Bits of interest in the BCSRs. */ #define BCSR1_ETHEN ((uint)0x20000000) +#define BCSR1_IRDAEN ((uint)0x10000000) #define BCSR1_RS232EN_1 ((uint)0x01000000) +#define BCSR1_PCCEN ((uint)0x00800000) +#define BCSR1_PCCVCC0 ((uint)0x00400000) +#define BCSR1_PCCVPP0 ((uint)0x00200000) +#define BCSR1_PCCVPP1 ((uint)0x00100000) +#define BCSR1_PCCVPP_MASK (BCSR1_PCCVPP0 | BCSR1_PCCVPP1) #define BCSR1_RS232EN_2 ((uint)0x00040000) +#define BCSR1_PCCVCC1 ((uint)0x00010000) +#define BCSR1_PCCVCC_MASK (BCSR1_PCCVCC0 | BCSR1_PCCVCC1) + #define BCSR4_ETHLOOP ((uint)0x80000000) /* EEST Loopback */ #define BCSR4_EEFDX ((uint)0x40000000) /* EEST FDX enable */ #define BCSR4_FETH_EN ((uint)0x08000000) /* PHY enable */ @@ -44,14 +91,64 @@ #define BCSR4_FETHFDE ((uint)0x02000000) /* PHY FDX advertise */ #define BCSR4_FETHRST ((uint)0x00200000) /* PHY Reset */ +/* IO_BASE definition for pcmcia. + */ +#define _IO_BASE 0x80000000 +#define _IO_BASE_SIZE 0x1000 + +#ifdef CONFIG_IDE +#define MAX_HWIFS 1 +#endif + /* Interrupt level assignments. */ #define FEC_INTERRUPT SIU_LEVEL1 /* FEC interrupt */ -#define PHY_INTERRUPT SIU_IRQ2 /* PHY link change interrupt */ /* We don't use the 8259. */ #define NR_8259_INTS 0 +/* CPM Ethernet through SCC1 or SCC2 */ + +#ifdef CONFIG_SCC1_ENET /* Probably 860 variant */ +/* Bits in parallel I/O port registers that have to be set/cleared + * to configure the pins for SCC1 use. + * TCLK - CLK1, RCLK - CLK2. + */ +#define PA_ENET_RXD ((ushort)0x0001) +#define PA_ENET_TXD ((ushort)0x0002) +#define PA_ENET_TCLK ((ushort)0x0100) +#define PA_ENET_RCLK ((ushort)0x0200) +#define PB_ENET_TENA ((uint)0x00001000) +#define PC_ENET_CLSN ((ushort)0x0010) +#define PC_ENET_RENA ((ushort)0x0020) + +/* Control bits in the SICR to route TCLK (CLK1) and RCLK (CLK2) to + * SCC1. Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero. + */ +#define SICR_ENET_MASK ((uint)0x000000ff) +#define SICR_ENET_CLKRT ((uint)0x0000002c) +#endif /* CONFIG_SCC1_ENET */ + +#ifdef CONFIG_SCC2_ENET /* Probably 823/850 variant */ +/* Bits in parallel I/O port registers that have to be set/cleared + * to configure the pins for SCC1 use. + * TCLK - CLK1, RCLK - CLK2. + */ +#define PA_ENET_RXD ((ushort)0x0004) +#define PA_ENET_TXD ((ushort)0x0008) +#define PA_ENET_TCLK ((ushort)0x0400) +#define PA_ENET_RCLK ((ushort)0x0200) +#define PB_ENET_TENA ((uint)0x00002000) +#define PC_ENET_CLSN ((ushort)0x0040) +#define PC_ENET_RENA ((ushort)0x0080) + +/* Control bits in the SICR to route TCLK and RCLK to + * SCC2. Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero. + */ +#define SICR_ENET_MASK ((uint)0x0000ff00) +#define SICR_ENET_CLKRT ((uint)0x00002e00) +#endif /* CONFIG_SCC2_ENET */ + #endif /* __ASM_FADS_H__ */ #endif /* __KERNEL__ */ diff --git a/arch/ppc/platforms/mpc885ads.h b/arch/ppc/platforms/mpc885ads.h new file mode 100644 index 00000000000..eb386635b0f --- /dev/null +++ b/arch/ppc/platforms/mpc885ads.h @@ -0,0 +1,92 @@ +/* + * A collection of structures, addresses, and values associated with + * the Freescale MPC885ADS board. + * Copied from the FADS stuff. + * + * Author: MontaVista Software, Inc. + * source@mvista.com + * + * 2005 (c) MontaVista Software, Inc. This file is licensed under the + * terms of the GNU General Public License version 2. This program is licensed + * "as is" without any warranty of any kind, whether express or implied. + */ + +#ifdef __KERNEL__ +#ifndef __ASM_MPC885ADS_H__ +#define __ASM_MPC885ADS_H__ + +#include + +#include + +/* U-Boot maps BCSR to 0xff080000 */ +#define BCSR_ADDR ((uint)0xff080000) +#define BCSR_SIZE ((uint)32) +#define BCSR0 ((uint)(BCSR_ADDR + 0x00)) +#define BCSR1 ((uint)(BCSR_ADDR + 0x04)) +#define BCSR2 ((uint)(BCSR_ADDR + 0x08)) +#define BCSR3 ((uint)(BCSR_ADDR + 0x0c)) +#define BCSR4 ((uint)(BCSR_ADDR + 0x10)) + +#define CFG_PHYDEV_ADDR ((uint)0xff0a0000) +#define BCSR5 ((uint)(CFG_PHYDEV_ADDR + 0x300)) + +#define IMAP_ADDR ((uint)0xff000000) +#define IMAP_SIZE ((uint)(64 * 1024)) + +#define PCMCIA_MEM_ADDR ((uint)0xff020000) +#define PCMCIA_MEM_SIZE ((uint)(64 * 1024)) + +/* Bits of interest in the BCSRs. + */ +#define BCSR1_ETHEN ((uint)0x20000000) +#define BCSR1_IRDAEN ((uint)0x10000000) +#define BCSR1_RS232EN_1 ((uint)0x01000000) +#define BCSR1_PCCEN ((uint)0x00800000) +#define BCSR1_PCCVCC0 ((uint)0x00400000) +#define BCSR1_PCCVPP0 ((uint)0x00200000) +#define BCSR1_PCCVPP1 ((uint)0x00100000) +#define BCSR1_PCCVPP_MASK (BCSR1_PCCVPP0 | BCSR1_PCCVPP1) +#define BCSR1_RS232EN_2 ((uint)0x00040000) +#define BCSR1_PCCVCC1 ((uint)0x00010000) +#define BCSR1_PCCVCC_MASK (BCSR1_PCCVCC0 | BCSR1_PCCVCC1) + +#define BCSR4_ETH10_RST ((uint)0x80000000) /* 10Base-T PHY reset*/ +#define BCSR4_USB_LO_SPD ((uint)0x04000000) +#define BCSR4_USB_VCC ((uint)0x02000000) +#define BCSR4_USB_FULL_SPD ((uint)0x00040000) +#define BCSR4_USB_EN ((uint)0x00020000) + +#define BCSR5_MII2_EN 0x40 +#define BCSR5_MII2_RST 0x20 +#define BCSR5_T1_RST 0x10 +#define BCSR5_ATM155_RST 0x08 +#define BCSR5_ATM25_RST 0x04 +#define BCSR5_MII1_EN 0x02 +#define BCSR5_MII1_RST 0x01 + +/* Interrupt level assignments */ +#define PHY_INTERRUPT SIU_IRQ7 /* PHY link change interrupt */ +#define SIU_INT_FEC1 SIU_LEVEL1 /* FEC1 interrupt */ +#define SIU_INT_FEC2 SIU_LEVEL3 /* FEC2 interrupt */ +#define FEC_INTERRUPT SIU_INT_FEC1 /* FEC interrupt */ + +/* We don't use the 8259 */ +#define NR_8259_INTS 0 + +/* CPM Ethernet through SCC3 */ +#define PA_ENET_RXD ((ushort)0x0040) +#define PA_ENET_TXD ((ushort)0x0080) +#define PE_ENET_TCLK ((uint)0x00004000) +#define PE_ENET_RCLK ((uint)0x00008000) +#define PE_ENET_TENA ((uint)0x00000010) +#define PC_ENET_CLSN ((ushort)0x0400) +#define PC_ENET_RENA ((ushort)0x0800) + +/* Control bits in the SICR to route TCLK (CLK5) and RCLK (CLK6) to + * SCC3. Also, make sure GR3 (bit 8) and SC3 (bit 9) are zero */ +#define SICR_ENET_MASK ((uint)0x00ff0000) +#define SICR_ENET_CLKRT ((uint)0x002c0000) + +#endif /* __ASM_MPC885ADS_H__ */ +#endif /* __KERNEL__ */ -- cgit v1.2.3 From f326d22b8cc5bfebfa5b3f6a4066dc737def2234 Mon Sep 17 00:00:00 2001 From: john stultz Date: Tue, 5 Jul 2005 18:54:44 -0700 Subject: [PATCH] ppc32: stop misusing NTP's time_offset value As part of my timeofday rework, I've been looking at the NTP code and I noticed that the PPC architecture is apparently misusing the NTP's time_offset (it is a terrible name!) value as some form of timezone offset. This could cause problems when time_offset changed by the NTP code. This patch changes the PPC code so it uses a more clear local variable: timezone_offset. Signed-off-by: John Stultz Acked-by: Tom Rini Cc: Benjamin Herrenschmidt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ppc/kernel/time.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/ppc/kernel/time.c b/arch/ppc/kernel/time.c index 73586655919..bf4ddca5e85 100644 --- a/arch/ppc/kernel/time.c +++ b/arch/ppc/kernel/time.c @@ -89,6 +89,9 @@ unsigned long tb_to_ns_scale; extern unsigned long wall_jiffies; +/* used for timezone offset */ +static long timezone_offset; + DEFINE_SPINLOCK(rtc_lock); EXPORT_SYMBOL(rtc_lock); @@ -170,7 +173,7 @@ void timer_interrupt(struct pt_regs * regs) xtime.tv_sec - last_rtc_update >= 659 && abs((xtime.tv_nsec / 1000) - (1000000-1000000/HZ)) < 500000/HZ && jiffies - wall_jiffies == 1) { - if (ppc_md.set_rtc_time(xtime.tv_sec+1 + time_offset) == 0) + if (ppc_md.set_rtc_time(xtime.tv_sec+1 + timezone_offset) == 0) last_rtc_update = xtime.tv_sec+1; else /* Try again one minute later */ @@ -286,7 +289,7 @@ void __init time_init(void) unsigned old_stamp, stamp, elapsed; if (ppc_md.time_init != NULL) - time_offset = ppc_md.time_init(); + timezone_offset = ppc_md.time_init(); if (__USE_RTC()) { /* 601 processor: dec counts down by 128 every 128ns */ @@ -331,10 +334,10 @@ void __init time_init(void) set_dec(tb_ticks_per_jiffy); /* If platform provided a timezone (pmac), we correct the time */ - if (time_offset) { - sys_tz.tz_minuteswest = -time_offset / 60; + if (timezone_offset) { + sys_tz.tz_minuteswest = -timezone_offset / 60; sys_tz.tz_dsttime = 0; - xtime.tv_sec -= time_offset; + xtime.tv_sec -= timezone_offset; } set_normalized_timespec(&wall_to_monotonic, -xtime.tv_sec, -xtime.tv_nsec); -- cgit v1.2.3 From 4b1294f928d9396e45f62b1c306ac8bf9fae036b Mon Sep 17 00:00:00 2001 From: Eugene Surovegin Date: Tue, 5 Jul 2005 18:54:45 -0700 Subject: [PATCH] ppc32: explicitly disable 440GP IRQ compatibility mode in 440GX setup Add explicit disabling of 440GP IRQ compatibility mode when configuring 440GX interrupt controller. This helps when board firmware for some reason uses this compatibility mode and leaves it enabled. It breaks 440GX interrupt code because it assumes native 440GX IRQ mode. People seems to be continuously bitten by this. Signed-off-by: Eugene Surovegin Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/ppc/syslib/ppc4xx_pic.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/ppc/syslib/ppc4xx_pic.c b/arch/ppc/syslib/ppc4xx_pic.c index 05686fa7354..40086212b9c 100644 --- a/arch/ppc/syslib/ppc4xx_pic.c +++ b/arch/ppc/syslib/ppc4xx_pic.c @@ -110,6 +110,10 @@ static int ppc4xx_pic_get_irq(struct pt_regs *regs) static void __init ppc4xx_pic_impl_init(void) { +#if defined(CONFIG_440GX) + /* Disable 440GP compatibility mode if it was enabled in firmware */ + SDR_WRITE(DCRN_SDR_MFR, SDR_READ(DCRN_SDR_MFR) & ~DCRN_SDR_MFR_PCM); +#endif /* Configure Base UIC */ mtdcr(DCRN_UIC_CR(UICB), 0); mtdcr(DCRN_UIC_TR(UICB), 0); -- cgit v1.2.3 From 6772926bef3c9f0ec761b39e5702535471fff70b Mon Sep 17 00:00:00 2001 From: Rusty Lynch Date: Tue, 5 Jul 2005 18:54:50 -0700 Subject: [PATCH] kprobes: fix namespace problem and sparc64 build The following renames arch_init, a kprobes function for performing any architecture specific initialization, to arch_init_kprobes in order to cleanup the namespace. Also, this patch adds arch_init_kprobes to sparc64 to fix the sparc64 kprobes build from the last return probe patch. Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/i386/kernel/kprobes.c | 2 +- arch/ia64/kernel/kprobes.c | 2 +- arch/ppc64/kernel/kprobes.c | 2 +- arch/sparc64/kernel/kprobes.c | 5 +++++ arch/x86_64/kernel/kprobes.c | 2 +- 5 files changed, 9 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/i386/kernel/kprobes.c b/arch/i386/kernel/kprobes.c index fc8b1752176..a6d8c45961d 100644 --- a/arch/i386/kernel/kprobes.c +++ b/arch/i386/kernel/kprobes.c @@ -537,7 +537,7 @@ static struct kprobe trampoline_p = { .pre_handler = trampoline_probe_handler }; -int __init arch_init(void) +int __init arch_init_kprobes(void) { return register_kprobe(&trampoline_p); } diff --git a/arch/ia64/kernel/kprobes.c b/arch/ia64/kernel/kprobes.c index 3aa3167edbe..884f5cd27d8 100644 --- a/arch/ia64/kernel/kprobes.c +++ b/arch/ia64/kernel/kprobes.c @@ -713,7 +713,7 @@ static struct kprobe trampoline_p = { .pre_handler = trampoline_probe_handler }; -int __init arch_init(void) +int __init arch_init_kprobes(void) { trampoline_p.addr = (kprobe_opcode_t *)((struct fnptr *)kretprobe_trampoline)->ip; diff --git a/arch/ppc64/kernel/kprobes.c b/arch/ppc64/kernel/kprobes.c index 1d2ff6d6b0b..a3d519518fb 100644 --- a/arch/ppc64/kernel/kprobes.c +++ b/arch/ppc64/kernel/kprobes.c @@ -444,7 +444,7 @@ static struct kprobe trampoline_p = { .pre_handler = trampoline_probe_handler }; -int __init arch_init(void) +int __init arch_init_kprobes(void) { return register_kprobe(&trampoline_p); } diff --git a/arch/sparc64/kernel/kprobes.c b/arch/sparc64/kernel/kprobes.c index bdac631cf01..bbf11f85dab 100644 --- a/arch/sparc64/kernel/kprobes.c +++ b/arch/sparc64/kernel/kprobes.c @@ -433,3 +433,8 @@ int longjmp_break_handler(struct kprobe *p, struct pt_regs *regs) return 0; } +/* architecture specific initialization */ +int arch_init_kprobes(void) +{ + return 0; +} diff --git a/arch/x86_64/kernel/kprobes.c b/arch/x86_64/kernel/kprobes.c index acd2a778ebe..5c6dc705148 100644 --- a/arch/x86_64/kernel/kprobes.c +++ b/arch/x86_64/kernel/kprobes.c @@ -682,7 +682,7 @@ static struct kprobe trampoline_p = { .pre_handler = trampoline_probe_handler }; -int __init arch_init(void) +int __init arch_init_kprobes(void) { return register_kprobe(&trampoline_p); } -- cgit v1.2.3 From fef43da4e4341697a682f5aae1d5d428e840bc61 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 5 Jul 2005 19:45:24 -0700 Subject: [SPARC64]: Fix UltraSPARC-III fallout from membar changes. The membar changes made the size of __cheetah_flush_tlb_pending grow by one instruction, but the boot-time code patching was not updated to match. Signed-off-by: David S. Miller --- arch/sparc64/mm/ultra.S | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/sparc64/mm/ultra.S b/arch/sparc64/mm/ultra.S index 7a2431d3abc..36377089379 100644 --- a/arch/sparc64/mm/ultra.S +++ b/arch/sparc64/mm/ultra.S @@ -72,6 +72,7 @@ __flush_tlb_pending: flush %g6 retl wrpr %g7, 0x0, %pstate + nop .align 32 .globl __flush_tlb_kernel_range @@ -249,7 +250,7 @@ __cheetah_flush_tlb_mm: /* 15 insns */ retl wrpr %g7, 0x0, %pstate -__cheetah_flush_tlb_pending: /* 22 insns */ +__cheetah_flush_tlb_pending: /* 23 insns */ /* %o0 = context, %o1 = nr, %o2 = vaddrs[] */ rdpr %pstate, %g7 sllx %o1, 3, %o1 @@ -317,7 +318,7 @@ cheetah_patch_cachetlbops: sethi %hi(__cheetah_flush_tlb_pending), %o1 or %o1, %lo(__cheetah_flush_tlb_pending), %o1 call cheetah_patch_one - mov 22, %o2 + mov 23, %o2 #ifdef DCACHE_ALIASING_POSSIBLE sethi %hi(__flush_dcache_page), %o0 -- cgit v1.2.3